Generic Sensor Failure Modeling for Cooperative Systems

PubMed Central

Jäger, Georg; Zug, Sebastian

2018-01-01

The advent of cooperative systems entails a dynamic composition of their components. As this contrasts current, statically composed systems, new approaches for maintaining their safety are required. In that endeavor, we propose an integration step that evaluates the failure model of shared information in relation to an application’s fault tolerance and thereby promises maintainability of such system’s safety. However, it also poses new requirements on failure models, which are not fulfilled by state-of-the-art approaches. Consequently, this work presents a mathematically defined generic failure model as well as a processing chain for automatically extracting such failure models from empirical data. By examining data of an Sharp GP2D12 distance sensor, we show that the generic failure model not only fulfills the predefined requirements, but also models failure characteristics appropriately when compared to traditional techniques. PMID:29558435

Investigation of an alternative generic model for predicting pharmacokinetic changes during physiological stress.

PubMed

Peng, Henry T; Edginton, Andrea N; Cheung, Bob

2013-10-01

Physiologically based pharmacokinetic models were developed using MATLAB Simulink® and PK-Sim®. We compared the capability and usefulness of these two models by simulating pharmacokinetic changes of midazolam under exercise and heat stress to verify the usefulness of MATLAB Simulink® as a generic PBPK modeling software. Although both models show good agreement with experimental data obtained under resting condition, their predictions of pharmacokinetics changes are less accurate in the stressful conditions. However, MATLAB Simulink® may be more flexible to include physiologically based processes such as oral absorption and simulate various stress parameters such as stress intensity, duration and timing of drug administration to improve model performance. Further work will be conducted to modify algorithms in our generic model developed using MATLAB Simulink® and to investigate pharmacokinetics under other physiological stress such as trauma. © The Author(s) 2013.

Implementing the space shuttle data processing system with the space generic open avionics architecture

NASA Technical Reports Server (NTRS)

Wray, Richard B.; Stovall, John R.

1993-01-01

This paper presents an overview of the application of the Space Generic Open Avionics Architecture (SGOAA) to the Space Shuttle Data Processing System (DPS) architecture design. This application has been performed to validate the SGOAA, and its potential use in flight critical systems. The paper summarizes key elements of the Space Shuttle avionics architecture, data processing system requirements and software architecture as currently implemented. It then summarizes the SGOAA architecture and describes a tailoring of the SGOAA to the Space Shuttle. The SGOAA consists of a generic system architecture for the entities in spacecraft avionics, a generic processing external and internal hardware architecture, a six class model of interfaces and functional subsystem architectures for data services and operations control capabilities. It has been proposed as an avionics architecture standard with the National Aeronautics and Space Administration (NASA), through its Strategic Avionics Technology Working Group, and is being considered by the Society of Aeronautic Engineers (SAE) as an SAE Avionics Standard. This architecture was developed for the Flight Data Systems Division of JSC by the Lockheed Engineering and Sciences Company, Houston, Texas.

Pose estimation of teeth through crown-shape matching

NASA Astrophysics Data System (ADS)

Mok, Vevin; Ong, Sim Heng; Foong, Kelvin W. C.; Kondo, Toshiaki

2002-05-01

This paper presents a technique for determining a tooth's pose given a dental plaster cast and a set of generic tooth models. The ultimate goal of pose estimation is to obtain information about the sizes and positions of the roots, which lie hidden within the gums, without the use of X-rays, CT or MRI. In our approach, the tooth of interest is first extracted from the 3D dental cast image through segmentation. 2D views are then generated from the extracted tooth and are matched against a target view generated from the generic model with known pose. Additional views are generated in the vicinity of the best view and the entire process is repeated until convergence. Upon convergence, the generic tooth is superimposed onto the dental cast to show the position of the root. The results of applying the technique to canines demonstrate the excellent potential of the algorithm for generic tooth fitting.

Universal Session-Level Change Processes in an Early Session of Psychotherapy: Path Models

ERIC Educational Resources Information Center

Kolden, Gregory G.; Chisholm-Stockard, Sarah M.; Strauman, Timothy J.; Tierney, Sandy C.; Mullen, Elizabeth A.; Schneider, Kristin L.

2006-01-01

The authors used structural equation modeling to investigate universal change processes identified in the generic model of psychotherapy (GMP). Three path models of increasing complexity were examined in Study 1 in dynamic therapy. The best fitting model from Study one was replicated in Study two for participants receiving either cognitive or…

Innovation strategies for generic drug companies: moving into supergenerics.

PubMed

Ross, Malcolm S F

2010-04-01

Pharmaceutical companies that market generic products generally are not regarded as innovators, but rather as companies that produce copies of originator products to be launched at patent expiration. However, many generics companies have developed excellent scientific innovative skills in an effort to circumvent the defense patents of originator companies. More patents per product, in terms of both drug substances (process patents and polymorph patents) and formulations, are issued to generics companies than to companies that are traditionally considered to be 'innovators'. This quantity of issued patents highlights the technical knowledge and skill sets that are available in generics companies. In order to adopt a completely innovative model (ie, the development of NCEs), a generics company would require a completely new set of skills in several fields, including a sufficient knowledge base, project and risk management experience, and capability for clinical data evaluation. However, with relatively little investment, generics companies should be able to progress into the so-called 'supergeneric' drug space - an area of innovation that reflects the existing competencies of both innovative and generics companies.

76 FR 69769 - Annual Public Meeting of the Interagency Steering Committee on Multimedia Environmental Modeling

Federal Register 2010, 2011, 2012, 2013, 2014

2011-11-09

... assessments of site specific, generic, and process-oriented multimedia environmental models as they pertain to human and environmental health risk assessment. Multimedia model development and simulation supports...

Modeling of ultrasonic processes utilizing a generic software framework

NASA Astrophysics Data System (ADS)

Bruns, P.; Twiefel, J.; Wallaschek, J.

2017-06-01

Modeling of ultrasonic processes is typically characterized by a high degree of complexity. Different domains and size scales must be regarded, so that it is rather difficult to build up a single detailed overall model. Developing partial models is a common approach to overcome this difficulty. In this paper a generic but simple software framework is presented which allows to coupe arbitrary partial models by slave modules with well-defined interfaces and a master module for coordination. Two examples are given to present the developed framework. The first one is the parameterization of a load model for ultrasonically-induced cavitation. The piezoelectric oscillator, its mounting, and the process load are described individually by partial models. These partial models then are coupled using the framework. The load model is composed of spring-damper-elements which are parameterized by experimental results. In the second example, the ideal mounting position for an oscillator utilized in ultrasonic assisted machining of stone is determined. Partial models for the ultrasonic oscillator, its mounting, the simplified contact process, and the workpiece’s material characteristics are presented. For both applications input and output variables are defined to meet the requirements of the framework’s interface.

A New Biogeochemical Computational Framework Integrated within the Community Land Model

NASA Astrophysics Data System (ADS)

Fang, Y.; Li, H.; Liu, C.; Huang, M.; Leung, L.

2012-12-01

Terrestrial biogeochemical processes, particularly carbon cycle dynamics, have been shown to significantly influence regional and global climate changes. Modeling terrestrial biogeochemical processes within the land component of Earth System Models such as the Community Land model (CLM), however, faces three major challenges: 1) extensive efforts in modifying modeling structures and rewriting computer programs to incorporate biogeochemical processes with increasing complexity, 2) expensive computational cost to solve the governing equations due to numerical stiffness inherited from large variations in the rates of biogeochemical processes, and 3) lack of an efficient framework to systematically evaluate various mathematical representations of biogeochemical processes. To address these challenges, we introduce a new computational framework to incorporate biogeochemical processes into CLM, which consists of a new biogeochemical module with a generic algorithm and reaction database. New and updated biogeochemical processes can be incorporated into CLM without significant code modification. To address the stiffness issue, algorithms and criteria will be developed to identify fast processes, which will be replaced with algebraic equations and decoupled from slow processes. This framework can serve as a generic and user-friendly platform to test out different mechanistic process representations and datasets and gain new insight on the behavior of the terrestrial ecosystems in response to climate change in a systematic way.

Efficient patient modeling for visuo-haptic VR simulation using a generic patient atlas.

PubMed

Mastmeyer, Andre; Fortmeier, Dirk; Handels, Heinz

2016-08-01

This work presents a new time-saving virtual patient modeling system by way of example for an existing visuo-haptic training and planning virtual reality (VR) system for percutaneous transhepatic cholangio-drainage (PTCD). Our modeling process is based on a generic patient atlas to start with. It is defined by organ-specific optimized models, method modules and parameters, i.e. mainly individual segmentation masks, transfer functions to fill the gaps between the masks and intensity image data. In this contribution, we show how generic patient atlases can be generalized to new patient data. The methodology consists of patient-specific, locally-adaptive transfer functions and dedicated modeling methods such as multi-atlas segmentation, vessel filtering and spline-modeling. Our full image volume segmentation algorithm yields median DICE coefficients of 0.98, 0.93, 0.82, 0.74, 0.51 and 0.48 regarding soft-tissue, liver, bone, skin, blood and bile vessels for ten test patients and three selected reference patients. Compared to standard slice-wise manual contouring time saving is remarkable. Our segmentation process shows out efficiency and robustness for upper abdominal puncture simulation systems. This marks a significant step toward establishing patient-specific training and hands-on planning systems in a clinical environment. Copyright © 2016 Elsevier Ireland Ltd. All rights reserved.

78 FR 59662 - Annual Public Meeting of the Interagency Steering Committee on Multimedia Environmental Modeling

Federal Register 2010, 2011, 2012, 2013, 2014

2013-09-27

... applications and assessment of site specific, generic, and process-oriented multimedia environmental models as... development and simulation supports interagency interests in risk assessment, uncertainty analyses, management...

A Generic Ground Framework for Image Expertise Centres and Small-Sized Production Centres

NASA Astrophysics Data System (ADS)

Sellé, A.

2009-05-01

Initiated by the Pleiadas Earth Observation Program, the CNES (French Space Agency) has developed a generic collaborative framework for its image quality centre, highly customisable for any upcoming expertise centre. This collaborative framework has been design to be used by a group of experts or scientists that want to share data and processings and manage interfaces with external entities. Its flexible and scalable architecture complies with the core requirements: defining a user data model with no impact on the software (generic access data), integrating user processings with a GUI builder and built-in APIs, and offering a scalable architecture to fit any preformance requirement and accompany growing projects. The CNES jas given licensing grants for two software companies that will be able to redistribute this framework to any customer.

Model-Based Fault Diagnosis: Performing Root Cause and Impact Analyses in Real Time

NASA Technical Reports Server (NTRS)

Figueroa, Jorge F.; Walker, Mark G.; Kapadia, Ravi; Morris, Jonathan

2012-01-01

Generic, object-oriented fault models, built according to causal-directed graph theory, have been integrated into an overall software architecture dedicated to monitoring and predicting the health of mission- critical systems. Processing over the generic fault models is triggered by event detection logic that is defined according to the specific functional requirements of the system and its components. Once triggered, the fault models provide an automated way for performing both upstream root cause analysis (RCA), and for predicting downstream effects or impact analysis. The methodology has been applied to integrated system health management (ISHM) implementations at NASA SSC's Rocket Engine Test Stands (RETS).

Size reduction techniques for vital compliant VHDL simulation models

DOEpatents

Rich, Marvin J.; Misra, Ashutosh

2006-08-01

A method and system select delay values from a VHDL standard delay file that correspond to an instance of a logic gate in a logic model. Then the system collects all the delay values of the selected instance and builds super generics for the rise-time and the fall-time of the selected instance. Then, the system repeats this process for every delay value in the standard delay file (310) that correspond to every instance of every logic gate in the logic model. The system then outputs a reduced size standard delay file (314) containing the super generics for every instance of every logic gate in the logic model.

Assessment of the Orion-SLS Interface Management Process in Achieving the EIA 731.1 Systems Engineering Capability Model Generic Practices Level 3 Criteria

NASA Technical Reports Server (NTRS)

Jellicorse, John J.; Rahman, Shamin A.

2016-01-01

NASA is currently developing the next generation crewed spacecraft and launch vehicle for exploration beyond earth orbit including returning to the Moon and making the transit to Mars. Managing the design integration of major hardware elements of a space transportation system is critical for overcoming both the technical and programmatic challenges in taking a complex system from concept to space operations. An established method of accomplishing this is formal interface management. In this paper we set forth an argument that the interface management process implemented by NASA between the Orion Multi-Purpose Crew Vehicle (MPCV) and the Space Launch System (SLS) achieves the Level 3 tier of the EIA 731.1 System Engineering Capability Model (SECM) for Generic Practices. We describe the relevant NASA systems and associated organizations, and define the EIA SECM Level 3 Generic Practices. We then provide evidence for our compliance with those practices. This evidence includes discussions of: NASA Systems Engineering Interface (SE) Management standard process and best practices; the tailoring of that process for implementation on the Orion to SLS interface; changes made over time to improve the tailored process, and; the opportunities to take the resulting lessons learned and propose improvements to our institutional processes and best practices. We compare this evidence against the practices to form the rationale for the declared SECM maturity level.

Two-year-olds use the generic/non-generic distinction to guide their inferences about novel kinds

PubMed Central

Graham, Susan A.; Nayer, Samantha L.; Gelman, Susan A.

2011-01-01

These studies investigated 24- and 30-month-olds’ sensitivity to generic versus nongeneric language when acquiring knowledge about novel kinds. Toddlers were administered an inductive inference task, during which they heard a generic noun-phrase (e.g., “Blicks drink milk”) or a non-generic noun-phrase (e.g., “This blick drinks milk”) paired with an action (e.g., drinking) modeled on an object. They were then provided with the model and a non-model exemplar and asked to imitate the action. After hearing non-generic phrases, 30-month-olds, but not 24-month-olds, imitated more often with the model than with the non-model exemplar. In contrast, after hearing generic phrases, 30-month-olds imitated equally often with both exemplars. These results suggest that 30-month-olds use the generic/non-generic distinction to guide their inferences about novel kinds. PMID:21410928

Physicians' Trust in the FDA's Use of Product-Specific Pathways for Generic Drug Approval.

PubMed

Kesselheim, Aaron S; Eddings, Wesley; Raj, Tara; Campbell, Eric G; Franklin, Jessica M; Ross, Kathryn M; Fulchino, Lisa A; Avorn, Jerry; Gagne, Joshua J

2016-01-01

Generic drugs are cost-effective versions of brand-name drugs approved by the Food and Drug Administration (FDA) following proof of pharmaceutical equivalence and bioequivalence. Generic drugs are widely prescribed by physicians, although there is disagreement over the clinical comparability of generic drugs to brand-name drugs within the physician community. The objective of this survey was to assess physicians' perceptions of generic drugs and the generic drug approval process. A survey was administered to a national sample of primary care internists and specialists between August 2014 and January 2015. In total, 1,152 physicians comprising of internists with no reported specialty certification and those with specialty certification in hematology, infectious diseases, and endocrinology were surveyed. The survey assessed physicians' perceptions of the FDA's generic drug approval process, as well as their experiences prescribing six generic drugs approved between 2008 and 2012 using product-specific approval pathways and selected comparator drugs. Among 718 respondents (62% response rate), a majority were comfortable with the FDA's process in ensuring the safety and effectiveness of generic drugs overall (91%) and with letting the FDA determine which tests were necessary to determine bioequivalence in a particular drug (92%). A minority (13-26%) still reported being uncomfortable prescribing generic drugs approved using product-specific pathways. Overall, few physicians heard reports of concerns about generic versions of the study drugs or their comparators, with no differences between the two groups. Physicians tended to hear about concerns about the safety or effectiveness of generic drugs from patients, pharmacists, and physician colleagues. Physicians hold largely positive views of the FDA's generic drug approval process even when some questioned the performance of certain generic drugs in comparison to brand-name drugs. Better education about the generic drug approval process and standards may alleviate concerns among the physician community and support the delivery of cost-effective health care.

a Generic Probabilistic Model and a Hierarchical Solution for Sensor Localization in Noisy and Restricted Conditions

NASA Astrophysics Data System (ADS)

Ji, S.; Yuan, X.

2016-06-01

A generic probabilistic model, under fundamental Bayes' rule and Markov assumption, is introduced to integrate the process of mobile platform localization with optical sensors. And based on it, three relative independent solutions, bundle adjustment, Kalman filtering and particle filtering are deduced under different and additional restrictions. We want to prove that first, Kalman filtering, may be a better initial-value supplier for bundle adjustment than traditional relative orientation in irregular strips and networks or failed tie-point extraction. Second, in high noisy conditions, particle filtering can act as a bridge for gap binding when a large number of gross errors fail a Kalman filtering or a bundle adjustment. Third, both filtering methods, which help reduce the error propagation and eliminate gross errors, guarantee a global and static bundle adjustment, who requires the strictest initial values and control conditions. The main innovation is about the integrated processing of stochastic errors and gross errors in sensor observations, and the integration of the three most used solutions, bundle adjustment, Kalman filtering and particle filtering into a generic probabilistic localization model. The tests in noisy and restricted situations are designed and examined to prove them.

Architecture design of a generic centralized adjudication module integrated in a web-based clinical trial management system.

PubMed

Zhao, Wenle; Pauls, Keith

2016-04-01

Centralized outcome adjudication has been used widely in multicenter clinical trials in order to prevent potential biases and to reduce variations in important safety and efficacy outcome assessments. Adjudication procedures could vary significantly among different studies. In practice, the coordination of outcome adjudication procedures in many multicenter clinical trials remains as a manual process with low efficiency and high risk of delay. Motivated by the demands from two large clinical trial networks, a generic outcome adjudication module has been developed by the network's data management center within a homegrown clinical trial management system. In this article, the system design strategy and database structure are presented. A generic database model was created to transfer different adjudication procedures into a unified set of sequential adjudication steps. Each adjudication step was defined by one activate condition, one lock condition, one to five categorical data items to capture adjudication results, and one free text field for general comments. Based on this model, a generic outcome adjudication user interface and a generic data processing program were developed within a homegrown clinical trial management system to provide automated coordination of outcome adjudication. By the end of 2014, this generic outcome adjudication module had been implemented in 10 multicenter trials. A total of 29 adjudication procedures were defined with the number of adjudication steps varying from 1 to 7. The implementation of a new adjudication procedure in this generic module took an experienced programmer 1 or 2 days. A total of 7336 outcome events had been adjudicated and 16,235 adjudication step activities had been recorded. In a multicenter trial, 1144 safety outcome event submissions went through a three-step adjudication procedure and reported a median of 3.95 days from safety event case report form submission to adjudication completion. In another trial, 277 clinical outcome events were adjudicated by a six-step procedure and took a median of 23.84 days from outcome event case report form submission to adjudication procedure completion. A generic outcome adjudication module integrated in the clinical trial management system made the automated coordination of efficacy and safety outcome adjudication a reality. © The Author(s) 2015.

Spontaneous symmetry breaking in active droplets provides a generic route to motility

PubMed Central

Tjhung, Elsen; Marenduzzo, Davide; Cates, Michael E.

2012-01-01

We explore a generic mechanism whereby a droplet of active matter acquires motility by the spontaneous breakdown of a discrete symmetry. The model we study offers a simple representation of a “cell extract” comprising, e.g., a droplet of actomyosin solution. (Such extracts are used experimentally to model the cytoskeleton). Actomyosin is an active gel whose polarity describes the mean sense of alignment of actin fibres. In the absence of polymerization and depolymerization processes (‘treadmilling’), the gel’s dynamics arises solely from the contractile motion of myosin motors; this should be unchanged when polarity is inverted. Our results suggest that motility can arise in the absence of treadmilling, by spontaneous symmetry breaking (SSB) of polarity inversion symmetry. Adapting our model to wall-bound cells in two dimensions, we find that as wall friction is reduced, treadmilling-induced motility falls but SSB-mediated motility rises. The latter might therefore be crucial in three dimensions where frictional forces are likely to be modest. At a supracellular level, the same generic mechanism can impart motility to aggregates of nonmotile but active bacteria; we show that SSB in this (extensile) case leads generically to rotational as well as translational motion. PMID:22797894

A generic model for estimating biomass accumulation and greenhouse gas emissions from perennial crops

NASA Astrophysics Data System (ADS)

Ledo, Alicia; Heathcote, Richard; Hastings, Astley; Smith, Pete; Hillier, Jonathan

2017-04-01

Agriculture is essential to maintain humankind but is, at the same time, a substantial emitter of greenhouse gas (GHG) emissions. With a rising global population, the need for agriculture to provide secure food and energy supply is one of the main human challenges. At the same time, it is the only sector which has significant potential for negative emissions through the sequestration of carbon and offsetting via supply of feedstock for energy production. Perennial crops accumulate carbon during their lifetime and enhance organic soil carbon increase via root senescence and decomposition. However, inconsistency in accounting for this stored biomass undermines efforts to assess the benefits of such cropping systems when applied at scale. A consequence of this exclusion is that efforts to manage this important carbon stock are neglected. Detailed information on carbon balance is crucial to identify the main processes responsible for greenhouse gas emissions in order to develop strategic mitigation programs. Perennial crops systems represent 30% in area of total global crop systems, a considerable amount to be ignored. Furthermore, they have a major standing both in the bioenergy and global food industries. In this study, we first present a generic model to calculate the carbon balance and GHGs emissions from perennial crops, covering both food and bioenergy crops. The model is composed of two simple process-based sub-models, to cover perennial grasses and other perennial woody plants. The first is a generic individual based sub-model (IBM) covering crops in which the yield is the fruit and the plant biomass is an unharvested residue. Trees, shrubs and climbers fall into this category. The second model is a generic area based sub-model (ABM) covering perennial grasses, in which the harvested part includes some of the plant parts in which the carbon storage is accounted. Most second generation perennial bioenergy crops fall into this category. Both generic sub-models presented in this paper can be parametrized for different crops. Quantifying CO2 capture by plants and biomass accumulation and changes in soil carbon, are key in evaluating the impacts of perennial crops in life cycle analysis. We then use this model to illustrate the importance of biomass in the overall GHG estimation from four important perennial crops - sugarcane, Miscanthus, coffee, and apples - which were chosen to cover tropical and temperate regions, trees and grasses, and energy and food supply.

A Generic Approach for Pen-Based User Interface Development

NASA Astrophysics Data System (ADS)

Macé, Sébastien; Anquetil, Éric

Pen-based interaction is an intuitive way to realize hand drawn structured documents, but few applications take advantage of it. Indeed, the interpretation of the user hand drawn strokes in the context of document is a complex problem. In this paper, we propose a new generic approach to develop such systems based on three independent components. The first one is a set of graphical and editing functions adapted to pen interaction. The second one is a rule-based formalism that models structured document composition and the corresponding interpretation process. The last one is a hand drawn stroke analyzer that is able to interpret strokes progressively, directly while the user is drawing. We highlight in particular the human-computer interaction induced from this progressive interpretation process. Thanks to this generic approach, three pen-based system prototypes have already been developed, for musical score editing, for graph editing, and for UML class diagram editing

Generic reactive transport codes as flexible tools to integrate soil organic matter degradation models with water, transport and geochemistry in soils

NASA Astrophysics Data System (ADS)

Jacques, Diederik; Gérard, Fréderic; Mayer, Uli; Simunek, Jirka; Leterme, Bertrand

2016-04-01

A large number of organic matter degradation, CO2 transport and dissolved organic matter models have been developed during the last decades. However, organic matter degradation models are in many cases strictly hard-coded in terms of organic pools, degradation kinetics and dependency on environmental variables. The scientific input of the model user is typically limited to the adjustment of input parameters. In addition, the coupling with geochemical soil processes including aqueous speciation, pH-dependent sorption and colloid-facilitated transport are not incorporated in many of these models, strongly limiting the scope of their application. Furthermore, the most comprehensive organic matter degradation models are combined with simplified representations of flow and transport processes in the soil system. We illustrate the capability of generic reactive transport codes to overcome these shortcomings. The formulations of reactive transport codes include a physics-based continuum representation of flow and transport processes, while biogeochemical reactions can be described as equilibrium processes constrained by thermodynamic principles and/or kinetic reaction networks. The flexibility of these type of codes allows for straight-forward extension of reaction networks, permits the inclusion of new model components (e.g.: organic matter pools, rate equations, parameter dependency on environmental conditions) and in such a way facilitates an application-tailored implementation of organic matter degradation models and related processes. A numerical benchmark involving two reactive transport codes (HPx and MIN3P) demonstrates how the process-based simulation of transient variably saturated water flow (Richards equation), solute transport (advection-dispersion equation), heat transfer and diffusion in the gas phase can be combined with a flexible implementation of a soil organic matter degradation model. The benchmark includes the production of leachable organic matter and inorganic carbon in the aqueous and gaseous phases, as well as different decomposition functions with first-order, linear dependence or nonlinear dependence on a biomass pool. In addition, we show how processes such as local bioturbation (bio-diffusion) can be included implicitly through a Fickian formulation of transport of soil organic matter. Coupling soil organic matter models with generic and flexible reactive transport codes offers a valuable tool to enhance insights into coupled physico-chemical processes at different scales within the scope of C-biogeochemical cycles, possibly linked with other chemical elements such as plant nutrients and pollutants.

A generic model for evaluating payor net cost savings from a disease management program.

PubMed

McKay, Niccie L

2006-01-01

Private and public payors increasingly are turning to disease management programs as a means of improving the quality of care provided and controlling expenditures for individuals with specific medical conditions. This article presents a generic model that can be adapted to evaluate payor net cost savings from a variety of types of disease management programs, with net cost savings taking into account both changes in expenditures resulting from the program and the costs of setting up and operating the program. The model specifies the required data, describes the data collection process, and shows how to calculate the net cost savings in a spreadsheet format. An accompanying hypothetical example illustrates how to use the model.

Cognitive-Operative Model of Intelligent Learning Systems Behavior

ERIC Educational Resources Information Center

Laureano-Cruces, Ana Lilia; Ramirez-Rodriguez, Javier; Mora-Torres, Martha; de Arriaga, Fernando; Escarela-Perez, Rafael

2010-01-01

In this paper behavior during the teaching-learning process is modeled by means of a fuzzy cognitive map. The elements used to model such behavior are part of a generic didactic model, which emphasizes the use of cognitive and operative strategies as part of the student-tutor interaction. Examples of possible initial scenarios for the…

Prediction of porosity of food materials during drying: Current challenges and directions.

PubMed

Joardder, Mohammad U H; Kumar, C; Karim, M A

2017-07-18

Pore formation in food samples is a common physical phenomenon observed during dehydration processes. The pore evolution during drying significantly affects the physical properties and quality of dried foods. Therefore, it should be taken into consideration when predicting transport processes in the drying sample. Characteristics of pore formation depend on the drying process parameters, product properties and processing time. Understanding the physics of pore formation and evolution during drying will assist in accurately predicting the drying kinetics and quality of food materials. Researchers have been trying to develop mathematical models to describe the pore formation and evolution during drying. In this study, existing porosity models are critically analysed and limitations are identified. Better insight into the factors affecting porosity is provided, and suggestions are proposed to overcome the limitations. These include considerations of process parameters such as glass transition temperature, sample temperature, and variable material properties in the porosity models. Several researchers have proposed models for porosity prediction of food materials during drying. However, these models are either very simplistic or empirical in nature and failed to consider relevant significant factors that influence porosity. In-depth understanding of characteristics of the pore is required for developing a generic model of porosity. A micro-level analysis of pore formation is presented for better understanding, which will help in developing an accurate and generic porosity model.

A generic biogeochemical module for earth system models

NASA Astrophysics Data System (ADS)

Fang, Y.; Huang, M.; Liu, C.; Li, H.-Y.; Leung, L. R.

2013-06-01

Physical and biogeochemical processes regulate soil carbon dynamics and CO2 flux to and from the atmosphere, influencing global climate changes. Integration of these processes into earth system models (e.g. community land models - CLM), however, currently faces three major challenges: (1) extensive efforts are required to modify modeling structures and to rewrite computer programs to incorporate new or updated processes as new knowledge is being generated, (2) computational cost is prohibitively expensive to simulate biogeochemical processes in land models due to large variations in the rates of biogeochemical processes, and (3) various mathematical representations of biogeochemical processes exist to incorporate different aspects of fundamental mechanisms, but systematic evaluation of the different mathematical representations is difficult, if not impossible. To address these challenges, we propose a new computational framework to easily incorporate physical and biogeochemical processes into land models. The new framework consists of a new biogeochemical module with a generic algorithm and reaction database so that new and updated processes can be incorporated into land models without the need to manually set up the ordinary differential equations to be solved numerically. The reaction database consists of processes of nutrient flow through the terrestrial ecosystems in plants, litter and soil. This framework facilitates effective comparison studies of biogeochemical cycles in an ecosystem using different conceptual models under the same land modeling framework. The approach was first implemented in CLM and benchmarked against simulations from the original CLM-CN code. A case study was then provided to demonstrate the advantages of using the new approach to incorporate a phosphorus cycle into the CLM model. To our knowledge, the phosphorus-incorporated CLM is a new model that can be used to simulate phosphorus limitation on the productivity of terrestrial ecosystems.

A work-centered cognitively based architecture for decision support: the work-centered infomediary layer (WIL) model

NASA Astrophysics Data System (ADS)

Zachary, Wayne; Eggleston, Robert; Donmoyer, Jason; Schremmer, Serge

2003-09-01

Decision-making is strongly shaped and influenced by the work context in which decisions are embedded. This suggests that decision support needs to be anchored by a model (implicit or explicit) of the work process, in contrast to traditional approaches that anchor decision support to either context free decision models (e.g., utility theory) or to detailed models of the external (e.g., battlespace) environment. An architecture for cognitively-based, work centered decision support called the Work-centered Informediary Layer (WIL) is presented. WIL separates decision support into three overall processes that build and dynamically maintain an explicit context model, use the context model to identify opportunities for decision support and tailor generic decision-support strategies to the current context and offer them to the system-user/decision-maker. The generic decision support strategies include such things as activity/attention aiding, decision process structuring, work performance support (selective, contextual automation), explanation/ elaboration, infosphere data retrieval, and what if/action-projection and visualization. A WIL-based application is a work-centered decision support layer that provides active support without intent inferencing, and that is cognitively based without requiring classical cognitive task analyses. Example WIL applications are detailed and discussed.

Generic domain models in software engineering

NASA Technical Reports Server (NTRS)

Maiden, Neil

1992-01-01

This paper outlines three research directions related to domain-specific software development: (1) reuse of generic models for domain-specific software development; (2) empirical evidence to determine these generic models, namely elicitation of mental knowledge schema possessed by expert software developers; and (3) exploitation of generic domain models to assist modelling of specific applications. It focuses on knowledge acquisition for domain-specific software development, with emphasis on tool support for the most important phases of software development.

Generic Safety Requirements for Developing Safe Insulin Pump Software

PubMed Central

Zhang, Yi; Jetley, Raoul; Jones, Paul L; Ray, Arnab

2011-01-01

Background The authors previously introduced a highly abstract generic insulin infusion pump (GIIP) model that identified common features and hazards shared by most insulin pumps on the market. The aim of this article is to extend our previous work on the GIIP model by articulating safety requirements that address the identified GIIP hazards. These safety requirements can be validated by manufacturers, and may ultimately serve as a safety reference for insulin pump software. Together, these two publications can serve as a basis for discussing insulin pump safety in the diabetes community. Methods In our previous work, we established a generic insulin pump architecture that abstracts functions common to many insulin pumps currently on the market and near-future pump designs. We then carried out a preliminary hazard analysis based on this architecture that included consultations with many domain experts. Further consultation with domain experts resulted in the safety requirements used in the modeling work presented in this article. Results Generic safety requirements for the GIIP model are presented, as appropriate, in parameterized format to accommodate clinical practices or specific insulin pump criteria important to safe device performance. Conclusions We believe that there is considerable value in having the diabetes, academic, and manufacturing communities consider and discuss these generic safety requirements. We hope that the communities will extend and revise them, make them more representative and comprehensive, experiment with them, and use them as a means for assessing the safety of insulin pump software designs. One potential use of these requirements is to integrate them into model-based engineering (MBE) software development methods. We believe, based on our experiences, that implementing safety requirements using MBE methods holds promise in reducing design/implementation flaws in insulin pump development and evolutionary processes, therefore improving overall safety of insulin pump software. PMID:22226258

Cortical basis of communication: local computation, coordination, attention.

PubMed

Alexandre, Frederic

2009-03-01

Human communication emerges from cortical processing, known to be implemented on a regular repetitive neuronal substratum. The supposed genericity of cortical processing has elicited a series of modeling works in computational neuroscience that underline the information flows driven by the cortical circuitry. In the minimalist framework underlying the current theories for the embodiment of cognition, such a generic cortical processing is exploited for the coordination of poles of representation, as is reported in this paper for the case of visual attention. Interestingly, this case emphasizes how abstract internal referents are built to conform to memory requirements. This paper proposes that these referents are the basis for communication in humans, which is firstly a coordination and an attentional procedure with regard to their congeners.

Is there a relationship between patient beliefs or communication about generic drugs and medication utilization?

PubMed

Shrank, William H; Cadarette, Suzanne M; Cox, Emily; Fischer, Michael A; Mehta, Jyotsna; Brookhart, Alan M; Avorn, Jerry; Choudhry, Niteesh K

2009-03-01

Insurers and policymakers strive to stimulate more cost-effective prescribing and, increasingly, are educating beneficiaries about generics. To evaluate the relationship between patient beliefs and communication about generic drugs and actual drug use. We performed a national mailed survey of a random sample of 2500 commercially-insured adults. Patient responses were linked to pharmacy claims data to assess actual generic medication use. We used factor analysis to develop 5 multi-item scales from patient survey responses that measured: (1) general preferences for generics, (2) generic safety/effectiveness, (3) generic cost/value, (4) comfort with generic substitution, and (5) communication with providers about generics. The relationship between each scale and the proportion of prescriptions filled for generics was assessed using linear regression, controlling for demographic, health, and insurance characteristics. Separate models were created for each scale and then all 5 scales were included simultaneously in a fully-adjusted model. The usable response rate was 48%. When evaluated independently, a 1 SD increase in each of the 5 scales was associated with a 3.1% to 6.3% increase in generic drug use (P < 0.05 for each). In the fully adjusted model, only 2 scales were significantly associated with generic drug use: comfort with generic substitution (P = 0.021) and communication with providers about generic drugs (P = 0.012). Generic drug use is most closely associated with the 2 actionable items we evaluated: communication with providers about generics and comfort with generic substitution. Educational campaigns that focus on these 2 domains may be most effective at influencing generic drug use.

Advanced Water Quality Modelling in Marine Systems: Application to the Wadden Sea, the Netherlands

NASA Astrophysics Data System (ADS)

Boon, J.; Smits, J. G.

2006-12-01

There is an increasing demand for knowledge and models that arise from water management in relation to water quality, sediment quality (ecology) and sediment accumulation (ecomorphology). Recently, models for sediment diagenesis and erosion developed or incorporated by Delft Hydraulics integrates the relevant physical, (bio)chemical and biological processes for the sediment-water exchange of substances. The aim of the diagenesis models is the prediction of both sediment quality and the return fluxes of substances such as nutrients and micropollutants to the overlying water. The resulting so-called DELWAQ-G model is a new, generic version of the water and sediment quality model of the DELFT3D framework. One set of generic water quality process formulations is used to calculate process rates in both water and sediment compartments. DELWAQ-G involves the explicit simulation of sediment layers in the water quality model with state-of-the-art process kinetics. The local conditions in a water layer or sediment layer such as the dissolved oxygen concentration determine if and how individual processes come to expression. New processes were added for sulphate, sulphide, methane and the distribution of the electron-acceptor demand over dissolved oxygen, nitrate, sulphate and carbon dioxide. DELWAQ-G also includes the dispersive and advective transport processes in the sediment and across the sediment-water interface. DELWAQ-G has been applied for the Wadden Sea. A very dynamic tidal and ecologically active estuary with a complex hydrodynamic behaviour located at the north of the Netherlands. The predicted profiles in the sediment reflect the typical interactions of diagenesis processes.

A Prototype Performance Assessment Model for Generic Deep Borehole Repository for High-Level Nuclear Waste - 12132

DOE Office of Scientific and Technical Information (OSTI.GOV)

Lee, Joon H.; Arnold, Bill W.; Swift, Peter N.

2012-07-01

A deep borehole repository is one of the four geologic disposal system options currently under study by the U.S. DOE to support the development of a long-term strategy for geologic disposal of commercial used nuclear fuel (UNF) and high-level radioactive waste (HLW). The immediate goal of the generic deep borehole repository study is to develop the necessary modeling tools to evaluate and improve the understanding of the repository system response and processes relevant to long-term disposal of UNF and HLW in a deep borehole. A prototype performance assessment model for a generic deep borehole repository has been developed using themore » approach for a mined geological repository. The preliminary results from the simplified deep borehole generic repository performance assessment indicate that soluble, non-sorbing (or weakly sorbing) fission product radionuclides, such as I-129, Se-79 and Cl-36, are the likely major dose contributors, and that the annual radiation doses to hypothetical future humans associated with those releases may be extremely small. While much work needs to be done to validate the model assumptions and parameters, these preliminary results highlight the importance of a robust seal design in assuring long-term isolation, and suggest that deep boreholes may be a viable alternative to mined repositories for disposal of both HLW and UNF. (authors)« less

A Community Health Worker "logic model": towards a theory of enhanced performance in low- and middle-income countries.

PubMed

Naimoli, Joseph F; Frymus, Diana E; Wuliji, Tana; Franco, Lynne M; Newsome, Martha H

2014-10-02

There has been a resurgence of interest in national Community Health Worker (CHW) programs in low- and middle-income countries (LMICs). A lack of strong research evidence persists, however, about the most efficient and effective strategies to ensure optimal, sustained performance of CHWs at scale. To facilitate learning and research to address this knowledge gap, the authors developed a generic CHW logic model that proposes a theoretical causal pathway to improved performance. The logic model draws upon available research and expert knowledge on CHWs in LMICs. Construction of the model entailed a multi-stage, inductive, two-year process. It began with the planning and implementation of a structured review of the existing research on community and health system support for enhanced CHW performance. It continued with a facilitated discussion of review findings with experts during a two-day consultation. The process culminated with the authors' review of consultation-generated documentation, additional analysis, and production of multiple iterations of the model. The generic CHW logic model posits that optimal CHW performance is a function of high quality CHW programming, which is reinforced, sustained, and brought to scale by robust, high-performing health and community systems, both of which mobilize inputs and put in place processes needed to fully achieve performance objectives. Multiple contextual factors can influence CHW programming, system functioning, and CHW performance. The model is a novel contribution to current thinking about CHWs. It places CHW performance at the center of the discussion about CHW programming, recognizes the strengths and limitations of discrete, targeted programs, and is comprehensive, reflecting the current state of both scientific and tacit knowledge about support for improving CHW performance. The model is also a practical tool that offers guidance for continuous learning about what works. Despite the model's limitations and several challenges in translating the potential for learning into tangible learning, the CHW generic logic model provides a solid basis for exploring and testing a causal pathway to improved performance.

Architecture design of a generic centralized adjudication module integrated in a web-based clinical trial management system

PubMed Central

Zhao, Wenle; Pauls, Keith

2015-01-01

Background Centralized outcome adjudication has been used widely in multi-center clinical trials in order to prevent potential biases and to reduce variations in important safety and efficacy outcome assessments. Adjudication procedures could vary significantly among different studies. In practice, the coordination of outcome adjudication procedures in many multicenter clinical trials remains as a manual process with low efficiency and high risk of delay. Motivated by the demands from two large clinical trial networks, a generic outcome adjudication module has been developed by the network’s data management center within a homegrown clinical trial management system. In this paper, the system design strategy and database structure are presented. Methods A generic database model was created to transfer different adjudication procedures into a unified set of sequential adjudication steps. Each adjudication step was defined by one activate condition, one lock condition, one to five categorical data items to capture adjudication results, and one free text field for general comments. Based on this model, a generic outcome adjudication user interface and a generic data processing program were developed within a homegrown clinical trial management system to provide automated coordination of outcome adjudication. Results By the end of 2014, this generic outcome adjudication module had been implemented in 10 multicenter trials. A total of 29 adjudication procedures were defined with the number of adjudication steps varying from 1 to 7. The implementation of a new adjudication procedure in this generic module took an experienced programmer one or two days. A total of 7,336 outcome events had been adjudicated and 16,235 adjudication step activities had been recorded. In a multicenter trial, 1144 safety outcome event submissions went through a three-step adjudication procedure and reported a median of 3.95 days from safety event case report form submission to adjudication completion. In another trial, 277 clinical outcome events were adjudicated by a six-step procedure and took a median of 23.84 days from outcome event case report form submission to adjudication procedure completion. Conclusions A generic outcome adjudication module integrated in the clinical trial management system made the automated coordination of efficacy and safety outcome adjudication a reality. PMID:26464429

Advances in cognitive theory and therapy: the generic cognitive model.

PubMed

Beck, Aaron T; Haigh, Emily A P

2014-01-01

For over 50 years, Beck's cognitive model has provided an evidence-based way to conceptualize and treat psychological disorders. The generic cognitive model represents a set of common principles that can be applied across the spectrum of psychological disorders. The updated theoretical model provides a framework for addressing significant questions regarding the phenomenology of disorders not explained in previous iterations of the original model. New additions to the theory include continuity of adaptive and maladaptive function, dual information processing, energizing of schemas, and attentional focus. The model includes a theory of modes, an organization of schemas relevant to expectancies, self-evaluations, rules, and memories. A description of the new theoretical model is followed by a presentation of the corresponding applied model, which provides a template for conceptualizing a specific disorder and formulating a case. The focus on beliefs differentiates disorders and provides a target for treatment. A variety of interventions are described.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Mohamed Abdelrahman; roger Haggard; Wagdy Mahmoud

The final goal of this project was the development of a system that is capable of controlling an industrial process effectively through the integration of information obtained through intelligent sensor fusion and intelligent control technologies. The industry of interest in this project was the metal casting industry as represented by cupola iron-melting furnaces. However, the developed technology is of generic type and hence applicable to several other industries. The system was divided into the following four major interacting components: 1. An object oriented generic architecture to integrate the developed software and hardware components @. Generic algorithms for intelligent signal analysismore » and sensor and model fusion 3. Development of supervisory structure for integration of intelligent sensor fusion data into the controller 4. Hardware implementation of intelligent signal analysis and fusion algorithms« less

Is There a Relationship Between Patient Beliefs or Communication About Generic Drugs and Medication Utilization?

PubMed Central

Shrank, William H.; Cadarette, Suzanne M.; Cox, Emily; Fischer, Michael A.; Mehta, Jyotsna; Brookhart, Alan M.; Avorn, Jerry; Choudhry, Niteesh K.

2009-01-01

Background Insurers and policymakers strive to stimulate more cost-effective prescribing and, increasingly, are educating beneficiaries about generics. Objectives To evaluate the relationship between patient beliefs and communication about generic drugs and actual drug use. Research Design and Subjects We performed a national mailed survey of a random sample of 2500 commercially-insured adults. Patient responses were linked to pharmacy claims data to assess actual generic medication use. Measures We used factor analysis to develop 5 multi-item scales from patient survey responses that measured: (1) general preferences for generics, (2) generic safety/effectiveness, (3) generic cost/value, (4) comfort with generic substitution, and (5) communication with providers about generics. The relationship between each scale and the proportion of prescriptions filled for generics was assessed using linear regression, controlling for demographic, health, and insurance characteristics. Separate models were created for each scale and then all 5 scales were included simultaneously in a fully-adjusted model. Results The usable response rate was 48%. When evaluated independently, a 1 SD increase in each of the 5 scales was associated with a 3.1% to 6.3% increase in generic drug use (P < 0.05 for each). In the fully adjusted model, only 2 scales were significantly associated with generic drug use: comfort with generic substitution (P = 0.021) and communication with providers about generic drugs (P = 0.012). Conclusions Generic drug use is most closely associated with the 2 actionable items we evaluated: communication with providers about generics and comfort with generic substitution. Educational campaigns that focus on these 2 domains may be most effective at influencing generic drug use. PMID:19194329

How the conceptions of Chinese rhetorical expressions are derived from the corresponding generic sentences

NASA Astrophysics Data System (ADS)

Zhao, Wenhui

2018-04-01

Generic sentences are simple and intuitive recognition and objective description to the external world in terms of "class". In the long evolutionary process of human being's language, the concepts represented by generic sentences has been internalized to be the defaulted knowledge in people's minds. In Chinese, some rhetorical expressions supported by corresponding generic sentences can be accepted by people. The derivation of these rhetorical expressions from the corresponding generic sentences is an important way for language to evolution, which reflects human's creative cognitive competence. From the perspective of conceptual blend theory and the theory of categorization of the cognitive linguistics, the goal of this paper is to analysis the process of the derivation of the rhetorical expressions from the corresponding generic sentences, which can facilitate the Chinese metaphorical information processing and the corpus construction of Chinese emotion metaphors.

Modeling integrated biomass gasification business concepts

Treesearch

Peter J. Ince; Ted Bilek; Mark A. Dietenberger

2011-01-01

Biomass gasification is an approach to producing energy and/or biofuels that could be integrated into existing forest product production facilities, particularly at pulp mills. Existing process heat and power loads tend to favor integration at existing pulp mills. This paper describes a generic modeling system for evaluating integrated biomass gasification business...

Trading Speed and Accuracy by Coding Time: A Coupled-circuit Cortical Model

PubMed Central

Standage, Dominic; You, Hongzhi; Wang, Da-Hui; Dorris, Michael C.

2013-01-01

Our actions take place in space and time, but despite the role of time in decision theory and the growing acknowledgement that the encoding of time is crucial to behaviour, few studies have considered the interactions between neural codes for objects in space and for elapsed time during perceptual decisions. The speed-accuracy trade-off (SAT) provides a window into spatiotemporal interactions. Our hypothesis is that temporal coding determines the rate at which spatial evidence is integrated, controlling the SAT by gain modulation. Here, we propose that local cortical circuits are inherently suited to the relevant spatial and temporal coding. In simulations of an interval estimation task, we use a generic local-circuit model to encode time by ‘climbing’ activity, seen in cortex during tasks with a timing requirement. The model is a network of simulated pyramidal cells and inhibitory interneurons, connected by conductance synapses. A simple learning rule enables the network to quickly produce new interval estimates, which show signature characteristics of estimates by experimental subjects. Analysis of network dynamics formally characterizes this generic, local-circuit timing mechanism. In simulations of a perceptual decision task, we couple two such networks. Network function is determined only by spatial selectivity and NMDA receptor conductance strength; all other parameters are identical. To trade speed and accuracy, the timing network simply learns longer or shorter intervals, driving the rate of downstream decision processing by spatially non-selective input, an established form of gain modulation. Like the timing network's interval estimates, decision times show signature characteristics of those by experimental subjects. Overall, we propose, demonstrate and analyse a generic mechanism for timing, a generic mechanism for modulation of decision processing by temporal codes, and we make predictions for experimental verification. PMID:23592967

Generic Argillite/Shale Disposal Reference Case

DOE Office of Scientific and Technical Information (OSTI.GOV)

Zheng, Liange; Colon, Carlos Jové; Bianchi, Marco

Radioactive waste disposal in a deep subsurface repository hosted in clay/shale/argillite is a subject of widespread interest given the desirable isolation properties, geochemically reduced conditions, and widespread geologic occurrence of this rock type (Hansen 2010; Bianchi et al. 2013). Bianchi et al. (2013) provides a description of diffusion in a clay-hosted repository based on single-phase flow and full saturation using parametric data from documented studies in Europe (e.g., ANDRA 2005). The predominance of diffusive transport and sorption phenomena in this clay media are key attributes to impede radionuclide mobility making clay rock formations target sites for disposal of high-level radioactivemore » waste. The reports by Hansen et al. (2010) and those from numerous studies in clay-hosted underground research laboratories (URLs) in Belgium, France and Switzerland outline the extensive scientific knowledge obtained to assess long-term clay/shale/argillite repository isolation performance of nuclear waste. In the past several years under the UFDC, various kinds of models have been developed for argillite repository to demonstrate the model capability, understand the spatial and temporal alteration of the repository, and evaluate different scenarios. These models include the coupled Thermal-Hydrological-Mechanical (THM) and Thermal-Hydrological-Mechanical-Chemical (THMC) models (e.g. Liu et al. 2013; Rutqvist et al. 2014a, Zheng et al. 2014a) that focus on THMC processes in the Engineered Barrier System (EBS) bentonite and argillite host hock, the large scale hydrogeologic model (Bianchi et al. 2014) that investigates the hydraulic connection between an emplacement drift and surrounding hydrogeological units, and Disposal Systems Evaluation Framework (DSEF) models (Greenberg et al. 2013) that evaluate thermal evolution in the host rock approximated as a thermal conduction process to facilitate the analysis of design options. However, the assumptions and the properties (parameters) used in these models are different, which not only make inter-model comparisons difficult, but also compromise the applicability of the lessons learned from one model to another model. The establishment of a reference case would therefore be helpful to set up a baseline for model development. A generic salt repository reference case was developed in Freeze et al. (2013) and the generic argillite repository reference case is presented in this report. The definition of a reference case requires the characterization of the waste inventory, waste form, waste package, repository layout, EBS backfill, host rock, and biosphere. This report mainly documents the processes in EBS bentonite and host rock that are potentially important for performance assessment and properties that are needed to describe these processes, with brief description other components such as waste inventory, waste form, waste package, repository layout, aquifer, and biosphere. A thorough description of the generic argillite repository reference case will be given in Jové Colon et al. (2014).« less

Modelling aqueous corrosion of nuclear waste phosphate glass

NASA Astrophysics Data System (ADS)

Poluektov, Pavel P.; Schmidt, Olga V.; Kascheev, Vladimir A.; Ojovan, Michael I.

2017-02-01

A model is presented on nuclear sodium alumina phosphate (NAP) glass aqueous corrosion accounting for dissolution of radioactive glass and formation of corrosion products surface layer on the glass contacting ground water of a disposal environment. Modelling is used to process available experimental data demonstrating the generic inhibiting role of corrosion products on the NAP glass surface.

Modeling Requirements for Cohort and Register IT.

PubMed

Stäubert, Sebastian; Weber, Ulrike; Michalik, Claudia; Dress, Jochen; Ngouongo, Sylvie; Stausberg, Jürgen; Winter, Alfred

2016-01-01

The project KoRegIT (funded by TMF e.V.) aimed to develop a generic catalog of requirements for research networks like cohort studies and registers (KoReg). The catalog supports such kind of research networks to build up and to manage their organizational and IT infrastructure. To make transparent the complex relationships between requirements, which are described in use cases from a given text catalog. By analyzing and modeling the requirements a better understanding and optimizations of the catalog are intended. There are two subgoals: a) to investigate one cohort study and two registers and to model the current state of their IT infrastructure; b) to analyze the current state models and to find simplifications within the generic catalog. Processing the generic catalog was performed by means of text extraction, conceptualization and concept mapping. Then methods of enterprise architecture planning (EAP) are used to model the extracted information. To work on objective a) questionnaires are developed by utilizing the model. They are used for semi-structured interviews, whose results are evaluated via qualitative content analysis. Afterwards the current state was modeled. Objective b) was done by model analysis. A given generic text catalog of requirements was transferred into a model. As result of objective a) current state models of one existing cohort study and two registers are created and analyzed. An optimized model called KoReg-reference-model is the result of objective b). It is possible to use methods of EAP to model requirements. This enables a better overview of the partly connected requirements by means of visualization. The model based approach also enables the analysis and comparison of the empirical data from the current state models. Information managers could reduce the effort of planning the IT infrastructure utilizing the KoReg-reference-model. Modeling the current state and the generation of reports from the model, which could be used as requirements specification for bids, is supported, too.

Generic process design and control strategies used to develop a dynamic model and training software for an IGCC plant with CO2 sequestration

DOE Office of Scientific and Technical Information (OSTI.GOV)

Provost, G.; Stone, H.; McClintock, M.

2008-01-01

To meet the growing demand for education and experience with the analysis, operation, and control of commercial-scale Integrated Gasification Combined Cycle (IGCC) plants, the Department of Energy’s (DOE) National Energy Technology Laboratory (NETL) is leading a collaborative R&D project with participants from government, academia, and industry. One of the goals of this project is to develop a generic, full-scope, real-time generic IGCC dynamic plant simulator for use in establishing a world-class research and training center, as well as to promote and demonstrate the technology to power industry personnel. The NETL IGCC dynamic plant simulator will combine for the first timemore » a process/gasification simulator and a power/combined-cycle simulator together in a single dynamic simulation framework for use in training applications as well as engineering studies. As envisioned, the simulator will have the following features and capabilities: A high-fidelity, real-time, dynamic model of process-side (gasification and gas cleaning with CO2 capture) and power-block-side (combined cycle) for a generic IGCC plant fueled by coal and/or petroleum coke Full-scope training simulator capabilities including startup, shutdown, load following and shedding, response to fuel and ambient condition variations, control strategy analysis (turbine vs. gasifier lead, etc.), representative malfunctions/trips, alarms, scenarios, trending, snapshots, data historian, and trainee performance monitoring The ability to enhance and modify the plant model to facilitate studies of changes in plant configuration and equipment and to support future R&D efforts To support this effort, process descriptions and control strategies were developed for key sections of the plant as part of the detailed functional specification, which will form the basis of the simulator development. These plant sections include: Slurry Preparation Air Separation Unit Gasifiers Syngas Scrubbers Shift Reactors Gas Cooling, Medium Pressure (MP) and Low Pressure (LP) Steam Generation, and Knockout Sour Water Stripper Mercury Removal Selexol™ Acid Gas Removal System CO2 Compression Syngas Reheat and Expansion Claus Plant Hydrogenation Reactor and Gas Cooler Combustion Turbine (CT)-Generator Assemblies Heat Recovery Steam Generators (HRSGs) and Steam Turbine (ST)-Generator In this paper, process descriptions, control strategies, and Process & Instrumentation Diagram (P&ID) drawings for key sections of the generic IGCC plant are presented, along with discussions of some of the operating procedures and representative faults that the simulator will cover. Some of the intended future applications for the simulator are discussed, including plant operation and control demonstrations as well as education and training services such as IGCC familiarization courses.« less

Pressurization and expulsion of cryogenic liquids: Generic requirements for a low gravity experiment

NASA Technical Reports Server (NTRS)

Vandresar, Neil T.; Stochl, Robert J.

1991-01-01

Requirements are presented for an experiment designed to obtain data for the pressurization and expulsion of a cryogenic supply tank in a low gravity environment. These requirements are of a generic nature and applicable to any cryogenic fluid of interest, condensible or non-condensible pressurants, and various low gravity test platforms such as the Space Shuttle or a free-flyer. Background information, the thermophysical process, preliminary analytical modeling, and experimental requirements are discussed. Key parameters, measurements, hardware requirements, procedures, a test matrix, and data analysis are outlined.

Heterogeneous Sensor Data Exploration and Sustainable Declarative Monitoring Architecture: Application to Smart Building

NASA Astrophysics Data System (ADS)

Servigne, S.; Gripay, Y.; Pinarer, O.; Samuel, J.; Ozgovde, A.; Jay, J.

2016-09-01

Concerning energy consumption and monitoring architectures, our goal is to develop a sustainable declarative monitoring architecture for lower energy consumption taking into account the monitoring system itself. Our second is to develop theoretical and practical tools to model, explore and exploit heterogeneous data from various sources in order to understand a phenomenon like energy consumption of smart building vs inhabitants' social behaviours. We focus on a generic model for data acquisition campaigns based on the concept of generic sensor. The concept of generic sensor is centered on acquired data and on their inherent multi-dimensional structure, to support complex domain-specific or field-oriented analysis processes. We consider that a methodological breakthrough may pave the way to deep understanding of voluminous and heterogeneous scientific data sets. Our use case concerns energy efficiency of buildings to understand relationship between physical phenomena and user behaviors. The aim of this paper is to give a presentation of our methodology and results concerning architecture and user-centric tools.

Using generic tool kits to build intelligent systems

NASA Technical Reports Server (NTRS)

Miller, David J.

1994-01-01

The Intelligent Systems and Robots Center at Sandia National Laboratories is developing technologies for the automation of processes associated with environmental remediation and information-driven manufacturing. These technologies, which focus on automated planning and programming and sensor-based and model-based control, are used to build intelligent systems which are able to generate plans of action, program the necessary devices, and use sensors to react to changes in the environment. By automating tasks through the use of programmable devices tied to computer models which are augmented by sensing, requirements for faster, safer, and cheaper systems are being satisfied. However, because of the need for rapid cost-effect prototyping and multi-laboratory teaming, it is also necessary to define a consistent approach to the construction of controllers for such systems. As a result, the Generic Intelligent System Controller (GISC) concept has been developed. This concept promotes the philosophy of producing generic tool kits which can be used and reused to build intelligent control systems.

Composite Load Spectra for Select Space Propulsion Structural Components

NASA Technical Reports Server (NTRS)

Ho, Hing W.; Newell, James F.

1994-01-01

Generic load models are described with multiple levels of progressive sophistication to simulate the composite (combined) load spectra (CLS) that are induced in space propulsion system components, representative of Space Shuttle Main Engines (SSME), such as transfer ducts, turbine blades and liquid oxygen (LOX) posts. These generic (coupled) models combine the deterministic models for composite load dynamic, acoustic, high-pressure and high rotational speed, etc., load simulation using statistically varying coefficients. These coefficients are then determined using advanced probabilistic simulation methods with and without strategically selected experimental data. The entire simulation process is included in a CLS computer code. Applications of the computer code to various components in conjunction with the PSAM (Probabilistic Structural Analysis Method) to perform probabilistic load evaluation and life prediction evaluations are also described to illustrate the effectiveness of the coupled model approach.

The Hazard Analysis and Critical Control Points (HACCP) generic model for the production of Thai fermented pork sausage (Nham).

PubMed

Paukatong, K V; Kunawasen, S

2001-01-01

Nham is a traditional Thai fermented pork sausage. The major ingredients of Nham are ground pork meat and shredded pork rind. Nham has been reported to be contaminated with Salmonella spp., Staphylococcus aureus, and Listeria monocytogenes. Therefore, it is a potential cause of foodborne diseases for consumers. A Hazard Analysis and Critical Control Points (HACCP) generic model has been developed for the Nham process. Nham processing plants were observed and a generic flow diagram of Nham processes was constructed. Hazard analysis was then conducted. Other than microbial hazards, the pathogens previously found in Nham, sodium nitrite and metal were identified as chemical and physical hazards in this product, respectively. Four steps in the Nham process have been identified as critical control points. These steps are the weighing of the nitrite compound, stuffing, fermentation, and labeling. The chemical hazard of nitrite must be controlled during the weighing step. The critical limit of nitrite levels in the Nham mixture has been set at 100-200 ppm. This level is high enough to control Clostridium botulinum but does not cause chemical hazards to the consumer. The physical hazard from metal clips could be prevented by visual inspection of every Nham product during stuffing. The microbiological hazard in Nham could be reduced in the fermentation process. The critical limit of the pH of Nham was set at lower than 4.6. Since this product is not cooked during processing, finally, educating the consumer, by providing information on the label such as "safe if cooked before consumption", could be an alternative way to prevent the microbiological hazards of this product.

A generic biogeochemical module for Earth system models: Next Generation BioGeoChemical Module (NGBGC), version 1.0

NASA Astrophysics Data System (ADS)

Fang, Y.; Huang, M.; Liu, C.; Li, H.; Leung, L. R.

2013-11-01

Physical and biogeochemical processes regulate soil carbon dynamics and CO2 flux to and from the atmosphere, influencing global climate changes. Integration of these processes into Earth system models (e.g., community land models (CLMs)), however, currently faces three major challenges: (1) extensive efforts are required to modify modeling structures and to rewrite computer programs to incorporate new or updated processes as new knowledge is being generated, (2) computational cost is prohibitively expensive to simulate biogeochemical processes in land models due to large variations in the rates of biogeochemical processes, and (3) various mathematical representations of biogeochemical processes exist to incorporate different aspects of fundamental mechanisms, but systematic evaluation of the different mathematical representations is difficult, if not impossible. To address these challenges, we propose a new computational framework to easily incorporate physical and biogeochemical processes into land models. The new framework consists of a new biogeochemical module, Next Generation BioGeoChemical Module (NGBGC), version 1.0, with a generic algorithm and reaction database so that new and updated processes can be incorporated into land models without the need to manually set up the ordinary differential equations to be solved numerically. The reaction database consists of processes of nutrient flow through the terrestrial ecosystems in plants, litter, and soil. This framework facilitates effective comparison studies of biogeochemical cycles in an ecosystem using different conceptual models under the same land modeling framework. The approach was first implemented in CLM and benchmarked against simulations from the original CLM-CN code. A case study was then provided to demonstrate the advantages of using the new approach to incorporate a phosphorus cycle into CLM. To our knowledge, the phosphorus-incorporated CLM is a new model that can be used to simulate phosphorus limitation on the productivity of terrestrial ecosystems. The method presented here could in theory be applied to simulate biogeochemical cycles in other Earth system models.

Anterior EEG Asymmetry and the Modifier Model of Autism

ERIC Educational Resources Information Center

Burnette, Courtney P.; Henderson, Heather A.; Inge, Anne Pradella; Zahka, Nicole E.; Schwartz, Caley B.; Mundy, Peter C.

2011-01-01

Individual differences in the expression of autism complicate research on the nature and treatment of this disorder. In the Modifier Model of Autism (Mundy et al. 2007), we proposed that individual differences in autism may result not only from syndrome specific causal processes, but also from variability in generic, non-syndrome specific…

Advanced Robotics for In-Space Vehicle Processing

NASA Technical Reports Server (NTRS)

Smith, Jeffrey H.; Estus, Jay; Heneghan, Cate; Bosley, John

1990-01-01

An analysis of spaceborne vehicle processing is described. Generic crew-EVA tasks are presented for a specific vehicle, the orbital maneuvering vehicle (OMV), with general implications to other on-orbit vehicles. The OMV is examined with respect to both servicing and maintenance. Crew-EVA activities are presented by task and mapped to a common set of generic crew-EVA primitives to identify high-demand areas for telerobot services. Similarly, a set of telerobot primitives is presented that can be used to model telerobot actions for alternative telerobot reference configurations. The telerobot primitives are tied to technologies and used for composting telerobot operations for an automated refueling scenario. Telerobotics technology issues and design accomodation guidelines (hooks and scars) for the Space Station Freedom are described.

Induction and Consolidation of Calcium-Based Homo- and Heterosynaptic Potentiation and Depression

PubMed Central

Li, Yinyun; Kulvicius, Tomas; Tetzlaff, Christian

2016-01-01

The adaptive mechanisms of homo- and heterosynaptic plasticity play an important role in learning and memory. In order to maintain plasticity-induced changes for longer time scales (up to several days), they have to be consolidated by transferring them from a short-lasting early-phase to a long-lasting late-phase state. The underlying processes of this synaptic consolidation are already well-known for homosynaptic plasticity, however, it is not clear whether the same processes also enable the induction and consolidation of heterosynaptic plasticity. In this study, by extending a generic calcium-based plasticity model with the processes of synaptic consolidation, we show in simulations that indeed heterosynaptic plasticity can be induced and, furthermore, consolidated by the same underlying processes as for homosynaptic plasticity. Furthermore, we show that by local diffusion processes the heterosynaptic effect can be restricted to a few synapses neighboring the homosynaptically changed ones. Taken together, this generic model reproduces many experimental results of synaptic tagging and consolidation, provides several predictions for heterosynaptic induction and consolidation, and yields insights into the complex interactions between homo- and heterosynaptic plasticity over a broad variety of time (minutes to days) and spatial scales (several micrometers). PMID:27560350

Knowledge sifters in MDA technologies

NASA Astrophysics Data System (ADS)

Kravchenko, Yuri; Kursitys, Ilona; Bova, Victoria

2018-05-01

The article considers a new approach to efficient management of information processes on the basis of object models. With the help of special design tools, a generic and application-independent application model is created, and then the program is implemented in a specific development environment. At the same time, the development process is completely based on a model that must contain all the information necessary for programming. The presence of a detailed model provides the automatic creation of typical parts of the application, the development of which is amenable to automation.

MOD silver metallization for photovoltaics

NASA Technical Reports Server (NTRS)

Vest, G. M.; Vest, R. W.

1984-01-01

The development of flat plate solar arrays is reported. Photovoltaic cells require back side metallization and a collector grid system on the front surface. Metallo-organic decomposition (MOD) silver films can eliminate most of the present problems with silver conductors. The objectives are to: (1) identify and characterize suitable MO compounds; (2) develop generic synthesis procedures for the MO compounds; (3) develop generic fabrication procedures to screen printable MOD silver inks; (4) optimize processing conditions to produce grid patterns and photovoltaic cells; and (5) develop a model which describes the adhesion between the fired silver film and the silicon surface.

GeoSegmenter: A statistically learned Chinese word segmenter for the geoscience domain

NASA Astrophysics Data System (ADS)

Huang, Lan; Du, Youfu; Chen, Gongyang

2015-03-01

Unlike English, the Chinese language has no space between words. Segmenting texts into words, known as the Chinese word segmentation (CWS) problem, thus becomes a fundamental issue for processing Chinese documents and the first step in many text mining applications, including information retrieval, machine translation and knowledge acquisition. However, for the geoscience subject domain, the CWS problem remains unsolved. Although a generic segmenter can be applied to process geoscience documents, they lack the domain specific knowledge and consequently their segmentation accuracy drops dramatically. This motivated us to develop a segmenter specifically for the geoscience subject domain: the GeoSegmenter. We first proposed a generic two-step framework for domain specific CWS. Following this framework, we built GeoSegmenter using conditional random fields, a principled statistical framework for sequence learning. Specifically, GeoSegmenter first identifies general terms by using a generic baseline segmenter. Then it recognises geoscience terms by learning and applying a model that can transform the initial segmentation into the goal segmentation. Empirical experimental results on geoscience documents and benchmark datasets showed that GeoSegmenter could effectively recognise both geoscience terms and general terms.

Generic Vehicle Speed Models Based On Traffic Simulation: Development and Application (Revision #1)

DOT National Transportation Integrated Search

1994-12-15

The findings of a research project to develop new methods of estimating speeds for inclusion in the Highway Performance Monitoring System (HPMS) Analytical Process are summarized. The paper focuses on the effects of traffic conditions excluding incid...

Generic Kalman Filter Software

NASA Technical Reports Server (NTRS)

Lisano, Michael E., II; Crues, Edwin Z.

2005-01-01

The Generic Kalman Filter (GKF) software provides a standard basis for the development of application-specific Kalman-filter programs. Historically, Kalman filters have been implemented by customized programs that must be written, coded, and debugged anew for each unique application, then tested and tuned with simulated or actual measurement data. Total development times for typical Kalman-filter application programs have ranged from months to weeks. The GKF software can simplify the development process and reduce the development time by eliminating the need to re-create the fundamental implementation of the Kalman filter for each new application. The GKF software is written in the ANSI C programming language. It contains a generic Kalman-filter-development directory that, in turn, contains a code for a generic Kalman filter function; more specifically, it contains a generically designed and generically coded implementation of linear, linearized, and extended Kalman filtering algorithms, including algorithms for state- and covariance-update and -propagation functions. The mathematical theory that underlies the algorithms is well known and has been reported extensively in the open technical literature. Also contained in the directory are a header file that defines generic Kalman-filter data structures and prototype functions and template versions of application-specific subfunction and calling navigation/estimation routine code and headers. Once the user has provided a calling routine and the required application-specific subfunctions, the application-specific Kalman-filter software can be compiled and executed immediately. During execution, the generic Kalman-filter function is called from a higher-level navigation or estimation routine that preprocesses measurement data and post-processes output data. The generic Kalman-filter function uses the aforementioned data structures and five implementation- specific subfunctions, which have been developed by the user on the basis of the aforementioned templates. The GKF software can be used to develop many different types of unfactorized Kalman filters. A developer can choose to implement either a linearized or an extended Kalman filter algorithm, without having to modify the GKF software. Control dynamics can be taken into account or neglected in the filter-dynamics model. Filter programs developed by use of the GKF software can be made to propagate equations of motion for linear or nonlinear dynamical systems that are deterministic or stochastic. In addition, filter programs can be made to operate in user-selectable "covariance analysis" and "propagation-only" modes that are useful in design and development stages.

Vehicle Surveillance with a Generic, Adaptive, 3D Vehicle Model.

PubMed

Leotta, Matthew J; Mundy, Joseph L

2011-07-01

In automated surveillance, one is often interested in tracking road vehicles, measuring their shape in 3D world space, and determining vehicle classification. To address these tasks simultaneously, an effective approach is the constrained alignment of a prior model of 3D vehicle shape to images. Previous 3D vehicle models are either generic but overly simple or rigid and overly complex. Rigid models represent exactly one vehicle design, so a large collection is needed. A single generic model can deform to a wide variety of shapes, but those shapes have been far too primitive. This paper uses a generic 3D vehicle model that deforms to match a wide variety of passenger vehicles. It is adjustable in complexity between the two extremes. The model is aligned to images by predicting and matching image intensity edges. Novel algorithms are presented for fitting models to multiple still images and simultaneous tracking while estimating shape in video. Experiments compare the proposed model to simple generic models in accuracy and reliability of 3D shape recovery from images and tracking in video. Standard techniques for classification are also used to compare the models. The proposed model outperforms the existing simple models at each task.

ImgLib2--generic image processing in Java.

PubMed

Pietzsch, Tobias; Preibisch, Stephan; Tomancák, Pavel; Saalfeld, Stephan

2012-11-15

ImgLib2 is an open-source Java library for n-dimensional data representation and manipulation with focus on image processing. It aims at minimizing code duplication by cleanly separating pixel-algebra, data access and data representation in memory. Algorithms can be implemented for classes of pixel types and generic access patterns by which they become independent of the specific dimensionality, pixel type and data representation. ImgLib2 illustrates that an elegant high-level programming interface can be achieved without sacrificing performance. It provides efficient implementations of common data types, storage layouts and algorithms. It is the data model underlying ImageJ2, the KNIME Image Processing toolbox and an increasing number of Fiji-Plugins. ImgLib2 is licensed under BSD. Documentation and source code are available at http://imglib2.net and in a public repository at https://github.com/imagej/imglib. Supplementary data are available at Bioinformatics Online. saalfeld@mpi-cbg.de

[HERA-QUEST: HTA evaluation of generic pharmaceutical products to improve quality, economic efficiency, patient safety and transparency in drug product changes in hospitals].

PubMed

Gyalrong-Steur, Miriam; Kellermann, Anita; Bernard, Rudolf; Berndt, Georg; Bindemann, Meike; Nusser-Rothermundt, Elfriede; Amann, Steffen; Brakebusch, Myga; Brüggmann, Jörg; Tydecks, Eva; Müller, Markus; Dörje, Frank; Kochs, Eberhard; Riedel, Rainer

2017-04-01

In view of the rising cost pressure and an increasing number of drug shortages, switches between generic drug preparations have become a daily routine in hospitals. To ensure consistently high treatment quality and best possible patient safety, the equivalence of the new and the previous drug preparation must be ensured before any change in the purchase of pharmaceutical products takes place. So far, no easily usable, transparent and standardized instrument for this kind of comparison between generic drug products has been available. A group of pharmaceutical experts has developed the drug HTA (health technology assessment) model "HERA" (HTA Evaluation of geneRic phArmaceutical products) through a multi-step process. The instrument is designed to perform both a qualitative and economic comparison of equivalent drug preparations ("aut idem" substitution) before switching products. The economic evaluation does not only consider unit prices and consumption quantity, but also the processing costs associated with a product change process. The qualitative comparison is based on the evaluation of 34 quality criteria belonging to six evaluation fields (e.g., approval status, practical handling, packaging design). The objective evaluation of the quality criteria is complemented by an assessment of special features of the individual hospital for complex drug switches, including the feedback of the physicians utilizing the drug preparation. Thus potentially problematic switches of pharmaceutical products can be avoided at the best possible rate, contributing to the improvement of patient safety. The novel drug HTA model HERA is a tool used in clinical practice that can add to an increase in quality, therapeutic safety and transparency of drug use while simultaneously contributing to the economic optimization of drug procurement in hospitals. Combining these two is essential for hospitals facing the tension between rising cost pressure and at the same time increasing demands on quality and transparency, triggered by, amongst others, current legislation (Hospital Structures Act, anti-corruption legislation). Copyright © 2017. Published by Elsevier GmbH.

On the use of tower-flux measurements to assess the performance of global ecosystem models

NASA Astrophysics Data System (ADS)

El Maayar, M.; Kucharik, C.

2003-04-01

Global ecosystem models are important tools for the study of biospheric processes and their responses to environmental changes. Such models typically translate knowledge, gained from local observations, into estimates of regional or even global outcomes of ecosystem processes. A typical test of ecosystem models consists of comparing their output against tower-flux measurements of land surface-atmosphere exchange of heat and mass. To perform such tests, models are typically run using detailed information on soil properties (texture, carbon content,...) and vegetation structure observed at the experimental site (e.g., vegetation height, vegetation phenology, leaf photosynthetic characteristics,...). In global simulations, however, earth's vegetation is typically represented by a limited number of plant functional types (PFT; group of plant species that have similar physiological and ecological characteristics). For each PFT (e.g., temperate broadleaf trees, boreal conifer evergreen trees,...), which can cover a very large area, a set of typical physiological and physical parameters are assigned. Thus, a legitimate question arises: How does the performance of a global ecosystem model run using detailed site-specific parameters compare with the performance of a less detailed global version where generic parameters are attributed to a group of vegetation species forming a PFT? To answer this question, we used a multiyear dataset, measured at two forest sites with contrasting environments, to compare seasonal and interannual variability of surface-atmosphere exchange of water and carbon predicted by the Integrated BIosphere Simulator-Dynamic Global Vegetation Model. Two types of simulations were, thus, performed: a) Detailed runs: observed vegetation characteristics (leaf area index, vegetation height,...) and soil carbon content, in addition to climate and soil type, are specified for model run; and b) Generic runs: when only observed climates and soil types at the measurement sites are used to run the model. The generic runs were performed for the number of years equal to the current age of the forests, initialized with no vegetation and a soil carbon density equal to zero.

A System for Modelling Cell–Cell Interactions during Plant Morphogenesis

PubMed Central

Dupuy, Lionel; Mackenzie, Jonathan; Rudge, Tim; Haseloff, Jim

2008-01-01

Background and aims During the development of multicellular organisms, cells are capable of interacting with each other through a range of biological and physical mechanisms. A description of these networks of cell–cell interactions is essential for an understanding of how cellular activity is co-ordinated in regionalized functional entities such as tissues or organs. The difficulty of experimenting on living tissues has been a major limitation to describing such systems, and computer modelling appears particularly helpful to characterize the behaviour of multicellular systems. The experimental difficulties inherent to the multitude of parallel interactions that underlie cellular morphogenesis have led to the need for computer models. Methods A new generic model of plant cellular morphogenesis is described that expresses interactions amongst cellular entities explicitly: the plant is described as a multi-scale structure, and interactions between distinct entities is established through a topological neighbourhood. Tissues are represented as 2D biphasic systems where the cell wall responds to turgor pressure through a viscous yielding of the cell wall. Key Results This principle was used in the development of the CellModeller software, a generic tool dedicated to the analysis and modelling of plant morphogenesis. The system was applied to three contrasting study cases illustrating genetic, hormonal and mechanical factors involved in plant morphogenesis. Conclusions Plant morphogenesis is fundamentally a cellular process and the CellModeller software, through its underlying generic model, provides an advanced research tool to analyse coupled physical and biological morphogenetic mechanisms. PMID:17921524

What's in a (role) name? Formal and conceptual aspects of comprehending personal nouns.

PubMed

Irmen, Lisa

2007-11-01

Two eye-tracking studies assessed effects of grammatical and conceptual gender cues in generic role name processing in German. Participants read passages about a social or occupational group introduced by way of a generic role name (e.g., Soldaten/soldiers, Künstler/artists). Later in the passage the gender of this group was specified by the anaphoric expression diese Männer/these men or diese Frauen/these women. Testing masculine generic role names of male, female or neutral conceptual gender (Exp. 1) showed that a gender mismatch between the role name's conceptual gender and the anaphor significantly slowed reading immediately before and after the anaphoric noun. A mismatch between the antecedent's grammatical gender and the anaphor slowed down the reading of the anaphoric noun itself. Testing grammatically gender-unmarked role names (Exp. 2) revealed a general male bias in participants' understanding, irrespective of grammatical or conceptual gender. The experiments extend previous findings on gender effects to non-referential role names and generic contexts. Theoretical aspects of gender and plural reference as well as gender information in mental models are discussed.

Towards a Web-Based Handbook of Generic, Process-Oriented Learning Designs

ERIC Educational Resources Information Center

Marjanovic, Olivera

2005-01-01

Process-oriented learning designs are innovative learning activities that include a set of inter-related learning tasks and are generic (could be used across disciplines). An example includes a problem-solving process widely used in problem-based learning today. Most of the existing process-oriented learning designs are not documented, let alone…

Association of authorized generic marketing with prescription drug spending on antidepressants from 2000 to 2011.

PubMed

Cheng, Ning; Banerjee, Tannista; Qian, Jingjing; Hansen, Richard A

Prior research suggests that authorized generic drugs increase competition and decrease prices, but little empirical evidence supports this conclusion. This study evaluated the impact of authorized generic marketing on brand and generic prices. Longitudinal analysis of the household component of the Medical Expenditure Panel Survey. Interview panels over 12 years, with a new panel each year. For each panel, 5 rounds of household interviews were conducted over 30 months. Nationally representative sample of the U.S. civilian noninstitutionalized population, focusing on people using 1 of 5 antidepressant drugs that became generically available between 2000 to 2011. Drugs and dose/formulations with versus without an authorized generic drug marketed. Multiple linear regression models with lagged variables evaluated the effect of an authorized generic on average inflation-adjusted brand and generic price, adjusting for payment sources, generic entry time, competitor price, and year. During 2000-2011, annual brand antidepressant utilization decreased from 51.47 to 7.52 million prescriptions, and generic antidepressant utilization increased from 0 to 88.83 million prescriptions. Over time, payment per prescription for brand prescriptions increased 25% overall, and generic payments decreased 70% for all payer types. With unadjusted data, after generic entry the average brand price decreased $0.59 per year with and $3.62 per year without an authorized generic in the market. Average generic prices decreased $10.30 per year with and $8.47 per year without an authorized generic in the market. In multiple regression models with lagged variables adjusted for heteroscedasticity, payer source, time since generic entry, competitor price, and year, authorized generics significantly reduced average payment for generic (-$3.03) and brand (-$60.64) prescriptions, and over time this price change slowly diminished. Availability of an authorized generic was associated with reduced average generic and brand price in the antidepressant market, supporting prior evidences. Copyright © 2017 American Pharmacists Association®. Published by Elsevier Inc. All rights reserved.

Adopting software quality measures for healthcare processes.

PubMed

Yildiz, Ozkan; Demirörs, Onur

2009-01-01

In this study, we investigated the adoptability of software quality measures for healthcare process measurement. Quality measures of ISO/IEC 9126 are redefined from a process perspective to build a generic healthcare process quality measurement model. Case study research method is used, and the model is applied to a public hospital's Entry to Care process. After the application, weak and strong aspects of the process can be easily observed. Access audibility, fault removal, completeness of documentation, and machine utilization are weak aspects and these aspects are the candidates for process improvement. On the other hand, functional completeness, fault ratio, input validity checking, response time, and throughput time are the strong aspects of the process.

A two-stage storage routing model for green roof runoff detention.

PubMed

Vesuviano, Gianni; Sonnenwald, Fred; Stovin, Virginia

2014-01-01

Green roofs have been adopted in urban drainage systems to control the total quantity and volumetric flow rate of runoff. Modern green roof designs are multi-layered, their main components being vegetation, substrate and, in almost all cases, a separate drainage layer. Most current hydrological models of green roofs combine the modelling of the separate layers into a single process; these models have limited predictive capability for roofs not sharing the same design. An adaptable, generic, two-stage model for a system consisting of a granular substrate over a hard plastic 'egg box'-style drainage layer and fibrous protection mat is presented. The substrate and drainage layer/protection mat are modelled separately by previously verified sub-models. Controlled storm events are applied to a green roof system in a rainfall simulator. The time-series modelled runoff is compared to the monitored runoff for each storm event. The modelled runoff profiles are accurate (mean Rt(2) = 0.971), but further characterization of the substrate component is required for the model to be generically applicable to other roof configurations with different substrate.

Knowledge Elicitation: Phase 1 Final Report. Volume 1

DTIC Science & Technology

1989-06-01

34 i.e., superficial features such as type of apparatus, while experts rely on basic principles of physics (e.g., conservation of energy ) and generic...process. This last part of the model would typically consist of descriptions of the impact of the process on one or more of the objects. Figure 3-4...goals. The elicitor is probing for an underlying mental model. 9. Expert: To kill him before he can take any action that would impact on our forces. 10

Statistical analysis of modeling error in structural dynamic systems

NASA Technical Reports Server (NTRS)

Hasselman, T. K.; Chrostowski, J. D.

1990-01-01

The paper presents a generic statistical model of the (total) modeling error for conventional space structures in their launch configuration. Modeling error is defined as the difference between analytical prediction and experimental measurement. It is represented by the differences between predicted and measured real eigenvalues and eigenvectors. Comparisons are made between pre-test and post-test models. Total modeling error is then subdivided into measurement error, experimental error and 'pure' modeling error, and comparisons made between measurement error and total modeling error. The generic statistical model presented in this paper is based on the first four global (primary structure) modes of four different structures belonging to the generic category of Conventional Space Structures (specifically excluding large truss-type space structures). As such, it may be used to evaluate the uncertainty of predicted mode shapes and frequencies, sinusoidal response, or the transient response of other structures belonging to the same generic category.

Generic NICA-Donnan model parameters for metal-ion binding by humic substances.

PubMed

Milne, Christopher J; Kinniburgh, David G; van Riemsdijk, Willem H; Tipping, Edward

2003-03-01

A total of 171 datasets of literature and experimental data for metal-ion binding by fulvic and humic acids have been digitized and re-analyzed using the NICA-Donnan model. Generic parameter values have been derived that can be used for modeling in the absence of specific metalion binding measurements. These values complement the previously derived generic descriptions of proton binding. For ions where the ranges of pH, concentration, and ionic strength conditions are well covered by the available data,the generic parameters successfully describe the metalion binding behavior across a very wide range of conditions and for different humic and fulvic acids. Where published data for other metal ions are too sparse to constrain the model well, generic parameters have been estimated by interpolating trends observable in the parameter values of the well-defined data. Recommended generic NICA-Donnan model parameters are provided for 23 metal ions (Al, Am, Ba, Ca, Cd, Cm, Co, CrIII, Cu, Dy, Eu, FeII, FeIII, Hg, Mg, Mn, Ni, Pb, Sr, Thv, UVIO2, VIIIO, and Zn) for both fulvic and humic acids. These parameters probably represent the best NICA-Donnan description of metal-ion binding that can be achieved using existing data.

Structure and haemostatic effects of generic versions of enoxaparin available for clinical use in Brazil: similarity to the original drug.

PubMed

Glauser, Bianca F; Vairo, Bruno C; Oliveira, Stephan-Nicollas M C G; Cinelli, Leonardo P; Pereira, Mariana S; Mourão, Paulo A S

2012-02-01

Patent protection for enoxaparin has expired. Generic preparations are developed and approved for clinical use in different countries. However, there is still skepticism about the possibility of making an exact copy of the original drug due to the complex processes involved in generating low-molecular-weight heparins. We have undertaken a careful analysis of generic versions of enoxaparin available for clinical use in Brazil. Thirty-three batches of active ingredient and 70 of the final pharmaceutical product were obtained from six different suppliers. They were analysed for their chemical composition, molecular size distribution, in vitro anticoagulant activity and pharmacological effects on animal models of experimental thrombosis and bleeding. Clearly, the generic versions of enoxaparin available for clinical use in Brazil are similar to the original drug. Only three out of 33 batches of active ingredient from one supplier showed differences in molecular size distribution, resulting from a low percentage of tetrasaccharide or the presence of a minor component eluted as monosaccharide. Three out of 70 batches of the final pharmaceutical products contained lower amounts of the active ingredient than that declared by the suppliers. Our results suggest that the generic versions of enoxaparin are a viable therapeutic option, but their use requires strict regulations to ensure accurate standards.

DNA condensation and size effects of DNA condensation agent

NASA Astrophysics Data System (ADS)

Liu, Yan-Hui; Jiang, Chong-Ming; Guo, Xin-Miao; Tang, Yan-Lin; Hu, Lin

2013-08-01

Based on the model of the strong correlation of counterions condensed on DNA molecule, by tailoring interaction potential, interduplex spacing and correlation spacing between condensed counterions on DNA molecule and interduplex spacing fluctuation strength, toroidal configuration, rod-like configuration and two-hole configurations are possible. The size effects of counterion structure on the toroidal structure can be detected by this model. The autocorrelation function of the tangent vectors is found as an effective way to detect the structure of toroidal conformations and the generic pathway of the process of DNA condensation. The generic pathway of all of the configurations involves an initial nucleation loop, and the next part of the DNA chain is folded on the top of the initial nucleation loop with different manners, in agreement with the recent experimental results.

Routes to the past: neural substrates of direct and generative autobiographical memory retrieval.

PubMed

Addis, Donna Rose; Knapp, Katie; Roberts, Reece P; Schacter, Daniel L

2012-02-01

Models of autobiographical memory propose two routes to retrieval depending on cue specificity. When available cues are specific and personally-relevant, a memory can be directly accessed. However, when available cues are generic, one must engage a generative retrieval process to produce more specific cues to successfully access a relevant memory. The current study sought to characterize the neural bases of these retrieval processes. During functional magnetic resonance imaging (fMRI), participants were shown personally-relevant cues to elicit direct retrieval, or generic cues (nouns) to elicit generative retrieval. We used spatiotemporal partial least squares to characterize the spatial and temporal characteristics of the networks associated with direct and generative retrieval. Both retrieval tasks engaged regions comprising the autobiographical retrieval network, including hippocampus, and medial prefrontal and parietal cortices. However, some key neural differences emerged. Generative retrieval differentially recruited lateral prefrontal and temporal regions early on during the retrieval process, likely supporting the strategic search operations and initial recovery of generic autobiographical information. However, many regions were activated more strongly during direct versus generative retrieval, even when we time-locked the analysis to the successful recovery of events in both conditions. This result suggests that there may be fundamental differences between memories that are accessed directly and those that are recovered via the iterative search and retrieval process that characterizes generative retrieval. Copyright © 2011 Elsevier Inc. All rights reserved.

Routes to the past: Neural substrates of direct and generative autobiographical memory retrieval

PubMed Central

Addis, Donna Rose; Knapp, Katie; Roberts, Reece P.; Schacter, Daniel L.

2011-01-01

Models of autobiographical memory propose two routes to retrieval depending on cue specificity. When available cues are specific and personally-relevant, a memory can be directly accessed. However, when available cues are generic, one must engage a generative retrieval process to produce more specific cues to successfully access a relevant memory. The current study sought to characterize the neural bases of these retrieval processes. During functional magnetic resonance imaging (fMRI), participants were shown personally-relevant cues to elicit direct retrieval, or generic cues (nouns) to elicit generative retrieval. We used spatiotemporal partial least squares to characterize the spatial and temporal characteristics of the networks associated with direct and generative retrieval. Both retrieval tasks engaged regions comprising the autobiographical retrieval network, including hippocampus, and medial prefrontal and parietal cortices. However, some key neural differences emerged. Generative retrieval differentially recruited lateral prefrontal and temporal regions early on during the retrieval process, likely supporting the strategic search operations and initial recovery of generic autobiographical information. However, many regions were activated more strongly during direct versus generative retrieval, even when we time-locked the analysis to the successful recovery of events in both conditions. This result suggests that there may be fundamental differences between memories that are accessed directly and those that are recovered via the iterative search and retrieval process that characterizes generative retrieval. PMID:22001264

Even apparently insignificant chemical deviations among bioequivalent generic antibiotics can lead to therapeutic nonequivalence: the case of meropenem.

PubMed

Agudelo, M; Rodriguez, C A; Pelaez, C A; Vesga, O

2014-01-01

Several studies with animal models have demonstrated that bioequivalence of generic products of antibiotics like vancomycin, as currently defined, do not guarantee therapeutic equivalence. However, the amounts and characteristics of impurities and degradation products in these formulations do not violate the requirements of the U.S. Pharmacopeia (USP). Here, we provide experimental data with three generic products of meropenem that help in understanding how these apparently insignificant chemical differences affect the in vivo efficacy. Meropenem generics were compared with the innovator in vitro by microbiological assay, susceptibility testing, and liquid chromatography/mass spectrometry (LC/MS) analysis and in vivo with the neutropenic guinea pig soleus infection model (Pseudomonas aeruginosa) and the neutropenic mouse thigh (P. aeruginosa), brain (P. aeruginosa), and lung (Klebisella pneumoniae) infection models, adding the dihydropeptidase I (DHP-I) inhibitor cilastatin in different proportions to the carbapenem. We found that the concentration and potency of the active pharmaceutical ingredient, in vitro susceptibility testing, and mouse pharmacokinetics were identical for all products; however, two generics differed significantly from the innovator in the guinea pig and mouse models, while the third generic was therapeutically equivalent under all conditions. Trisodium adducts in a bioequivalent generic made it more susceptible to DHP-I hydrolysis and less stable at room temperature, explaining its therapeutic nonequivalence. We conclude that the therapeutic nonequivalence of generic products of meropenem is due to greater susceptibility to DHP-I hydrolysis. These failing generics are compliant with USP requirements and would remain undetectable under current regulations.

Extreme Environments Development of Decision Processes and Training Programs for Medical Policy Formulation

NASA Technical Reports Server (NTRS)

Stough, Roger

2004-01-01

The purpose of this workshop was to survey existing health and safety policies as well as processes and practices for various extreme environments; to identify strengths and shortcomings of these processes; and to recommend parameters for inclusion in a generic approach to policy formulation, applicable to the broadest categories of extreme environments. It was anticipated that two additional workshops would follow. The November 7, 2003 workshop would be devoted to the evaluation of different model(s) and a concluding expert evaluation of the usefulness of the model using a policy formulation example. The final workshop was planned for March 2004.

Human life support during interplanetary travel and domicile. II - Generic Modular Flow Schematic modeling

NASA Technical Reports Server (NTRS)

Farral, Joseph F.; Seshan, P. K.; Rohatgi, Naresh K.

1991-01-01

This paper describes the Generic Modular Flow Schematic (GMFS) architecture capable of encompassing all functional elements of a physical/chemical life support system (LSS). The GMFS can be implemented to synthesize, model, analyze, and quantitatively compare many configurations of LSSs, from a simple, completely open-loop to a very complex closed-loop. The GMFS model is coded in ASPEN, a state-of-the-art chemical process simulation program, to accurately compute the material, heat, and power flow quantities for every stream in each of the subsystem functional elements (SFEs) in the chosen configuration of a life support system. The GMFS approach integrates the various SFEs and subsystems in a hierarchical and modular fashion facilitating rapid substitutions and reconfiguration of a life support system. The comprehensive ASPEN material and energy balance output is transferred to a systems and technology assessment spreadsheet for rigorous system analysis and trade studies.

DEVA: An extensible ontology-based annotation model for visual document collections

NASA Astrophysics Data System (ADS)

Jelmini, Carlo; Marchand-Maillet, Stephane

2003-01-01

The description of visual documents is a fundamental aspect of any efficient information management system, but the process of manually annotating large collections of documents is tedious and far from being perfect. The need for a generic and extensible annotation model therefore arises. In this paper, we present DEVA, an open, generic and expressive multimedia annotation framework. DEVA is an extension of the Dublin Core specification. The model can represent the semantic content of any visual document. It is described in the ontology language DAML+OIL and can easily be extended with external specialized ontologies, adapting the vocabulary to the given application domain. In parallel, we present the Magritte annotation tool, which is an early prototype that validates the DEVA features. Magritte allows to manually annotating image collections. It is designed with a modular and extensible architecture, which enables the user to dynamically adapt the user interface to specialized ontologies merged into DEVA.

Promoting Different Reading Comprehension Levels through Online Annotations

ERIC Educational Resources Information Center

Tseng, Sheng-Shiang; Yeh, Hui-Chin; Yang, Shih-hsien

2015-01-01

Previous studies have evaluated reading comprehension as the general understanding of reading texts. However, this broad and generic assessment of reading comprehension overlooks the specific aspects and processes that students need to develop. This study adopted Kintsch's Construction-Integration model to tap into reading comprehension at…

Software synthesis using generic architectures

NASA Technical Reports Server (NTRS)

Bhansali, Sanjay

1993-01-01

A framework for synthesizing software systems based on abstracting software system designs and the design process is described. The result of such an abstraction process is a generic architecture and the process knowledge for customizing the architecture. The customization process knowledge is used to assist a designer in customizing the architecture as opposed to completely automating the design of systems. Our approach using an implemented example of a generic tracking architecture which was customized in two different domains is illustrated. How the designs produced using KASE compare to the original designs of the two systems, and current work and plans for extending KASE to other application areas are described.

Phase transitions in restricted Boltzmann machines with generic priors

NASA Astrophysics Data System (ADS)

Barra, Adriano; Genovese, Giuseppe; Sollich, Peter; Tantari, Daniele

2017-10-01

We study generalized restricted Boltzmann machines with generic priors for units and weights, interpolating between Boolean and Gaussian variables. We present a complete analysis of the replica symmetric phase diagram of these systems, which can be regarded as generalized Hopfield models. We underline the role of the retrieval phase for both inference and learning processes and we show that retrieval is robust for a large class of weight and unit priors, beyond the standard Hopfield scenario. Furthermore, we show how the paramagnetic phase boundary is directly related to the optimal size of the training set necessary for good generalization in a teacher-student scenario of unsupervised learning.

Image-Based 3D Face Modeling System

NASA Astrophysics Data System (ADS)

Park, In Kyu; Zhang, Hui; Vezhnevets, Vladimir

2005-12-01

This paper describes an automatic system for 3D face modeling using frontal and profile images taken by an ordinary digital camera. The system consists of four subsystems including frontal feature detection, profile feature detection, shape deformation, and texture generation modules. The frontal and profile feature detection modules automatically extract the facial parts such as the eye, nose, mouth, and ear. The shape deformation module utilizes the detected features to deform the generic head mesh model such that the deformed model coincides with the detected features. A texture is created by combining the facial textures augmented from the input images and the synthesized texture and mapped onto the deformed generic head model. This paper provides a practical system for 3D face modeling, which is highly automated by aggregating, customizing, and optimizing a bunch of individual computer vision algorithms. The experimental results show a highly automated process of modeling, which is sufficiently robust to various imaging conditions. The whole model creation including all the optional manual corrections takes only 2[InlineEquation not available: see fulltext.]3 minutes.

Site-specific temporal and spatial validation of a generic plant pest forecast system with observations of Bactrocera dorsalis (oriental fruit fly).

USDA-ARS?s Scientific Manuscript database

This study introduces a simple generic model, the Generic Pest Forecast System (GPFS), for simulatingthe relative populations of non-indigenousarthropod pests in space and time. The model was designed to calculate the population index or relative population using hourly weather dataas influenced by...

Time for change in community nursing? A critique of the implementation of the Review of Nursing in the Community across NHS Scotland.

PubMed

Dickson, Caroline A W; Coulter Smith, Margaret A

2013-03-01

Current literature underpinning change is examined and a critique offered of the implementation of the role of the generic Community Health Nurse in Scotland, from a leadership and cultural perspective. In November 2006, Government strategy outlined a new service model for community nursing to be implemented in four demonstration sites across Scotland. Almost two-thirds of community nurses were not supportive of the model. There was belief this generic role would not meet the health needs of patients and carers. Evidence supporting the model is presented and the implementation process evaluated from leadership and cultural perspectives. The literature is examined to offer explanations as to why implementation was unsuccessful. Transformational and transactional leadership at all levels of the organization are required to make change happen. Evidence supporting change provides an impetus for change. The culture of an organization should be recognized and harnessed during the change process. Effective facilitation will empower staff to make change happen. Engagement with staff is vital, at the beginning of the change process. The concept of 'nearby' leadership offers an enabling style of leadership at an individual and group level which will enable effective change. © 2012 Blackwell Publishing Ltd.

A simple 2D biofilm model yields a variety of morphological features.

PubMed

Hermanowicz, S W

2001-01-01

A two-dimensional biofilm model was developed based on the concept of cellular automata. Three simple, generic processes were included in the model: cell growth, internal and external mass transport and cell detachment (erosion). The model generated a diverse range of biofilm morphologies (from dense layers to open, mushroom-like forms) similar to those observed in real biofilm systems. Bulk nutrient concentration and external mass transfer resistance had a large influence on the biofilm structure.

21 CFR 123.10 - Training.

Code of Federal Regulations, 2010 CFR

2010-04-01

... HACCP principles to fish and fishery product processing at least equivalent to that received under... standardized curriculum. (a) Developing a HACCP plan, which could include adapting a model or generic-type HACCP plan, that is appropriate for a specific processor, in order to meet the requirements of § 123.6(b...

Simultaneous Sensor and Process Fault Diagnostics for Propellant Feed System

NASA Technical Reports Server (NTRS)

Cao, J.; Kwan, C.; Figueroa, F.; Xu, R.

2006-01-01

The main objective of this research is to extract fault features from sensor faults and process faults by using advanced fault detection and isolation (FDI) algorithms. A tank system that has some common characteristics to a NASA testbed at Stennis Space Center was used to verify our proposed algorithms. First, a generic tank system was modeled. Second, a mathematical model suitable for FDI has been derived for the tank system. Third, a new and general FDI procedure has been designed to distinguish process faults and sensor faults. Extensive simulations clearly demonstrated the advantages of the new design.

Essential equivalence of the general equation for the nonequilibrium reversible-irreversible coupling (GENERIC) and steepest-entropy-ascent models of dissipation for nonequilibrium thermodynamics.

PubMed

Montefusco, Alberto; Consonni, Francesco; Beretta, Gian Paolo

2015-04-01

By reformulating the steepest-entropy-ascent (SEA) dynamical model for nonequilibrium thermodynamics in the mathematical language of differential geometry, we compare it with the primitive formulation of the general equation for the nonequilibrium reversible-irreversible coupling (GENERIC) model and discuss the main technical differences of the two approaches. In both dynamical models the description of dissipation is of the "entropy-gradient" type. SEA focuses only on the dissipative, i.e., entropy generating, component of the time evolution, chooses a sub-Riemannian metric tensor as dissipative structure, and uses the local entropy density field as potential. GENERIC emphasizes the coupling between the dissipative and nondissipative components of the time evolution, chooses two compatible degenerate structures (Poisson and degenerate co-Riemannian), and uses the global energy and entropy functionals as potentials. As an illustration, we rewrite the known GENERIC formulation of the Boltzmann equation in terms of the square root of the distribution function adopted by the SEA formulation. We then provide a formal proof that in more general frameworks, whenever all degeneracies in the GENERIC framework are related to conservation laws, the SEA and GENERIC models of the dissipative component of the dynamics are essentially interchangeable, provided of course they assume the same kinematics. As part of the discussion, we note that equipping the dissipative structure of GENERIC with the Leibniz identity makes it automatically SEA on metric leaves.

Combining a generic process-based productivity model classification method to predict the presence and absence species in the Pacific Northwest, U.S.A

Treesearch

Nicholas C. Coops; Richard H. Waring; Todd A. Schroeder

2009-01-01

Although long-lived tree species experience considerable environmental variation over their life spans, their geographical distributions reflect sensitivity mainly to mean monthly climatic conditions.We introduce an approach that incorporates a physiologically based growth model to illustrate how a half-dozen tree species differ in their responses to monthly variation...

Model Transformation for a System of Systems Dependability Safety Case

NASA Technical Reports Server (NTRS)

Murphy, Judy; Driskell, Stephen B.

2010-01-01

Software plays an increasingly larger role in all aspects of NASA's science missions. This has been extended to the identification, management and control of faults which affect safety-critical functions and by default, the overall success of the mission. Traditionally, the analysis of fault identification, management and control are hardware based. Due to the increasing complexity of system, there has been a corresponding increase in the complexity in fault management software. The NASA Independent Validation & Verification (IV&V) program is creating processes and procedures to identify, and incorporate safety-critical software requirements along with corresponding software faults so that potential hazards may be mitigated. This Specific to Generic ... A Case for Reuse paper describes the phases of a dependability and safety study which identifies a new, process to create a foundation for reusable assets. These assets support the identification and management of specific software faults and, their transformation from specific to generic software faults. This approach also has applications to other systems outside of the NASA environment. This paper addresses how a mission specific dependability and safety case is being transformed to a generic dependability and safety case which can be reused for any type of space mission with an emphasis on software fault conditions.

Almost certain escape from black holes in final state projection models.

PubMed

Lloyd, Seth

2006-02-17

Recent models of the black-hole final state suggest that quantum information can escape from a black hole by a process akin to teleportation. These models rely on a controversial process called final-state projection. This Letter discusses the self-consistency of the final-state projection hypothesis and investigates escape from black holes for arbitrary final states and for generic interactions between matter and Hawking radiation. Quantum information escapes with fidelity approximately = (8/3pi)2: only half a bit of quantum information is lost on average, independent of the number of bits that escape from the hole.

Generic Airplane Model Concept and Four Specific Models Developed for Use in Piloted Simulation Studies

NASA Technical Reports Server (NTRS)

Hoffler, Keith D.; Fears, Scott P.; Carzoo, Susan W.

1997-01-01

A generic airplane model concept was developed to allow configurations with various agility, performance, handling qualities, and pilot vehicle interface to be generated rapidly for piloted simulation studies. The simple concept allows stick shaping and various stick command types or modes to drive an airplane with both linear and nonlinear components. Output from the stick shaping goes to linear models or a series of linear models that can represent an entire flight envelope. The generic model also has provisions for control power limitations, a nonlinear feature. Therefore, departures from controlled flight are possible. Note that only loss of control is modeled, the generic airplane does not accurately model post departure phenomenon. The model concept is presented herein, along with four example airplanes. Agility was varied across the four example airplanes without altering specific excess energy or significantly altering handling qualities. A new feedback scheme to provide angle-of-attack cueing to the pilot, while using a pitch rate command system, was implemented and tested.

Optimisation of a Generic Ionic Model of Cardiac Myocyte Electrical Activity

PubMed Central

Guo, Tianruo; Al Abed, Amr; Lovell, Nigel H.; Dokos, Socrates

2013-01-01

A generic cardiomyocyte ionic model, whose complexity lies between a simple phenomenological formulation and a biophysically detailed ionic membrane current description, is presented. The model provides a user-defined number of ionic currents, employing two-gate Hodgkin-Huxley type kinetics. Its generic nature allows accurate reconstruction of action potential waveforms recorded experimentally from a range of cardiac myocytes. Using a multiobjective optimisation approach, the generic ionic model was optimised to accurately reproduce multiple action potential waveforms recorded from central and peripheral sinoatrial nodes and right atrial and left atrial myocytes from rabbit cardiac tissue preparations, under different electrical stimulus protocols and pharmacological conditions. When fitted simultaneously to multiple datasets, the time course of several physiologically realistic ionic currents could be reconstructed. Model behaviours tend to be well identified when extra experimental information is incorporated into the optimisation. PMID:23710254

Longitudinal factorial invariance of the PedsQL 4.0 Generic Core Scales child self-report Version: one year prospective evidence from the California State Children's Health Insurance Program (SCHIP).

PubMed

Varni, James W; Limbers, Christine A; Newman, Daniel A; Seid, Michael

2008-11-01

The measurement of health-related quality of life (HRQOL) in pediatric medicine and health services research has grown significantly over the past decade. The paradigm shift toward patient-reported outcomes (PROs) has provided the opportunity to emphasize the value and critical need for pediatric patient self-report. In order for changes in HRQOL/PRO outcomes to be meaningful over time, it is essential to demonstrate longitudinal factorial invariance. This study examined the longitudinal factor structure of the PedsQL 4.0 Generic Core Scales over a one-year period for child self-report ages 5-17 in 2,887 children from a statewide evaluation of the California State Children's Health Insurance Program (SCHIP) utilizing a structural equation modeling framework. Specifying four- and five-factor measurement models, longitudinal structural equation modeling was used to compare factor structures over a one-year interval on the PedsQL 4.0 Generic Core Scales. While the four-factor conceptually-derived measurement model for the PedsQL 4.0 Generic Core Scales produced an acceptable fit, the five-factor empirically-derived measurement model from the initial field test of the PedsQL 4.0 Generic Core Scales produced a marginally superior fit in comparison to the four-factor model. For the five-factor measurement model, the best fitting model, strict factorial invariance of the PedsQL 4.0 Generic Core Scales across the two measurement occasions was supported by the stability of the comparative fit index between the unconstrained and constrained models, and several additional indices of practical fit including the root mean squared error of approximation, the non-normed fit index, and the parsimony normed fit index. The findings support an equivalent factor structure on the PedsQL 4.0 Generic Core Scales over time. Based on these data, it can be concluded that over a one-year period children in our study interpreted items on the PedsQL 4.0 Generic Core Scales in a similar manner.

Determining generic velocity and density models for crustal amplification calculations, with an update of the Boore and Joyner (1997) Generic Site Amplification for Graphic Site Amplification

USGS Publications Warehouse

Boore, David

2016-01-01

This short note contains two contributions related to deriving depth‐dependent velocity and density models for use in computing generic crustal amplifications. The first contribution is a method for interpolating two velocity profiles to obtain a third profile with a time‐averaged velocity  to depth Z that is equal to a specified value (e.g., for shear‐wave velocity VS,  for Z=30  m, in which the subscript S has been added to indicate that the average is for shear‐wave velocities). The second contribution is a procedure for obtaining densities from VS. The first contribution is used to extend and revise the Boore and Joyner (1997) generic rock VS model, for which , to a model with the more common . This new model is then used with the densities from the second contribution to compute crustal amplifications for a generic site with .

Generic Science Skills Enhancement of Students through Implementation of IDEAL Problem Solving Model on Genetic Information Course

NASA Astrophysics Data System (ADS)

Zirconia, A.; Supriyanti, F. M. T.; Supriatna, A.

2018-04-01

This study aims to determine generic science skills enhancement of students through implementation of IDEAL problem-solving model on genetic information course. Method of this research was mixed method, with pretest-posttest nonequivalent control group design. Subjects of this study were chemistry students enrolled in biochemistry course, consisted of 22 students in the experimental class and 19 students in control class. The instrument in this study was essayed involves 6 indicators generic science skills such as indirect observation, causality thinking, logical frame, self-consistent thinking, symbolic language, and developing concept. The results showed that genetic information course using IDEAL problem-solving model have been enhancing generic science skills in low category with of 20,93%. Based on result for each indicator, showed that there are indicators of generic science skills classified in the high category.

Conducting requirements analyses for research using routinely collected health data: a model driven approach.

PubMed

de Lusignan, Simon; Cashman, Josephine; Poh, Norman; Michalakidis, Georgios; Mason, Aaron; Desombre, Terry; Krause, Paul

2012-01-01

Medical research increasingly requires the linkage of data from different sources. Conducting a requirements analysis for a new application is an established part of software engineering, but rarely reported in the biomedical literature; and no generic approaches have been published as to how to link heterogeneous health data. Literature review, followed by a consensus process to define how requirements for research, using, multiple data sources might be modeled. We have developed a requirements analysis: i-ScheDULEs - The first components of the modeling process are indexing and create a rich picture of the research study. Secondly, we developed a series of reference models of progressive complexity: Data flow diagrams (DFD) to define data requirements; unified modeling language (UML) use case diagrams to capture study specific and governance requirements; and finally, business process models, using business process modeling notation (BPMN). These requirements and their associated models should become part of research study protocols.

A Nonlinear Dynamic Inversion Predictor-Based Model Reference Adaptive Controller for a Generic Transport Model

NASA Technical Reports Server (NTRS)

Campbell, Stefan F.; Kaneshige, John T.

2010-01-01

Presented here is a Predictor-Based Model Reference Adaptive Control (PMRAC) architecture for a generic transport aircraft. At its core, this architecture features a three-axis, non-linear, dynamic-inversion controller. Command inputs for this baseline controller are provided by pilot roll-rate, pitch-rate, and sideslip commands. This paper will first thoroughly present the baseline controller followed by a description of the PMRAC adaptive augmentation to this control system. Results are presented via a full-scale, nonlinear simulation of NASA s Generic Transport Model (GTM).

Impact of alternative interventions on changes in generic dispensing rates.

PubMed

O'Malley, A James; Frank, Richard G; Kaddis, Atheer; Rothenberg, Barbara M; McNeil, Barbara J

2006-10-01

To evaluate the effectiveness of four alternative interventions (member mailings, advertising campaigns, free generic drug samples to physicians, and physician financial incentives) used by a major health insurer to encourage its members to switch to generic drugs. Using claim-level data from Blue Cross Blue Shield of Michigan, we evaluated the success of four interventions implemented during 2000-2003 designed to increase the use of generic drugs among its members. Around 13 million claims involving seven important classes of drugs were used to assess the effectiveness of the interventions. For each intervention a control group was developed that most closely resembled the corresponding intervention group. Logistic regression models with interaction effects between the treatment group (intervention versus control) and the status of the intervention (active versus not active) were used to evaluate if the interventions had an effect on the generic dispensing rate (GDR). Because the mail order pharmacy was considered more aggressive at converting prescriptions to generics, separate generic purchasing models were fitted to retail and mail order claims. In secondary analyses separate models were also fitted to claims involving a new condition and claims refilled for preexisting conditions. The interventions did not appear to increase the market penetration of generic drugs for either retail or mail order claims, or for claims involving new or preexisting conditions. In addition, we found that the ratio of copayments for brand name to generic drugs had a large positive effect on the GDR. The interventions did not appear to directly influence the GDR. Financial incentives expressed to consumers through benefit designs have a large influence on their switching to generic drugs and on the less-costly mail-order mode of purchase.

Definition and Classification of Generic Drugs Across the World.

PubMed

Alfonso-Cristancho, Rafael; Andia, Tatiana; Barbosa, Tatiana; Watanabe, Jonathan H

2015-08-01

Our aim was to systematically identify and compare how generic medications, as defined by the US Food and Drug Administration (FDA), World Health Organization (WHO), and European Medicines Agency (EMA), are classified and defined by regulatory agencies around the world. We focused on emerging markets and selected the most populated countries in each of the WHO regions: Africa, the Americas, Eastern Mediterranean, Europe, Southeast Asia, and Western Pacific. A structured review of published literature was performed through December 2013. Direct information from regulatory agencies and Ministries of Health for each country was extracted. Additionally, key informant interviews were performed for validation. Of the 21 countries selected, approximately half provided an official country-level definition for generic pharmaceuticals. The others did not have any definition or referred to the WHO. Only two-thirds of the countries had specific requirements for generic pharmaceuticals, often associated with clinical interchangeability. Most countries with requirements mention bioequivalence, but few required bioavailability studies explicitly. Over 30% of the countries had other terms associated with generics in their definitions and processes. In countries with generic drug policies, there is reference to patent and/or data protection during the drug registration process. Several countries do not mention good manufacturing practices as part of the evaluation process. Countries in Africa and Eastern Mediterranean regions appear to have a less developed regulatory framework. In summary, there is significant variability in the definition and classification of generic drugs in emerging markets. Standardization of the definitions is necessary to make international comparisons viable.

Generic Surface-to-Air Missile Model.

DTIC Science & Technology

1979-10-01

describes the Generic Surface-to-Air Missile Model (GENSAM) which evaluates the outcome of an engagement between a surface-to-air missile system and an...DETAILS OF THE GENERIC SAM MODEL 3-1 3.1 Coordinate Transformations 3-1 3.1.1 Coordinate Systems 3-1 3.1.2 Coordinate Transformations 3-4 3.1.3 Functions...Tracking Radars 3-54 3.3.11 Deception Jamming and Tracking Radars 3-55 3.3.12 Jaming and Track Radar Downlinks 3-56 3.3.13 Infrared Surveillance Systems 3

Can generic knee joint models improve the measurement of osteoarthritic knee kinematics during squatting activity?

PubMed

Clément, Julien; Dumas, Raphaël; Hagemeister, Nicola; de Guise, Jaques A

2017-01-01

Knee joint kinematics derived from multi-body optimisation (MBO) still requires evaluation. The objective of this study was to corroborate model-derived kinematics of osteoarthritic knees obtained using four generic knee joint models used in musculoskeletal modelling - spherical, hinge, degree-of-freedom coupling curves and parallel mechanism - against reference knee kinematics measured by stereo-radiography. Root mean square errors ranged from 0.7° to 23.4° for knee rotations and from 0.6 to 9.0 mm for knee displacements. Model-derived knee kinematics computed from generic knee joint models was inaccurate. Future developments and experiments should improve the reliability of osteoarthritic knee models in MBO and musculoskeletal modelling.

Common Cause Failure Modeling: Aerospace Versus Nuclear

NASA Technical Reports Server (NTRS)

Stott, James E.; Britton, Paul; Ring, Robert W.; Hark, Frank; Hatfield, G. Spencer

2010-01-01

Aggregate nuclear plant failure data is used to produce generic common-cause factors that are specifically for use in the common-cause failure models of NUREG/CR-5485. Furthermore, the models presented in NUREG/CR-5485 are specifically designed to incorporate two significantly distinct assumptions about the methods of surveillance testing from whence this aggregate failure data came. What are the implications of using these NUREG generic factors to model the common-cause failures of aerospace systems? Herein, the implications of using the NUREG generic factors in the modeling of aerospace systems are investigated in detail and strong recommendations for modeling the common-cause failures of aerospace systems are given.

Generic-distributed framework for cloud services marketplace based on unified ontology.

PubMed

Hasan, Samer; Valli Kumari, V

2017-11-01

Cloud computing is a pattern for delivering ubiquitous and on demand computing resources based on pay-as-you-use financial model. Typically, cloud providers advertise cloud service descriptions in various formats on the Internet. On the other hand, cloud consumers use available search engines (Google and Yahoo) to explore cloud service descriptions and find the adequate service. Unfortunately, general purpose search engines are not designed to provide a small and complete set of results, which makes the process a big challenge. This paper presents a generic-distrusted framework for cloud services marketplace to automate cloud services discovery and selection process, and remove the barriers between service providers and consumers. Additionally, this work implements two instances of generic framework by adopting two different matching algorithms; namely dominant and recessive attributes algorithm borrowed from gene science and semantic similarity algorithm based on unified cloud service ontology. Finally, this paper presents unified cloud services ontology and models the real-life cloud services according to the proposed ontology. To the best of the authors' knowledge, this is the first attempt to build a cloud services marketplace where cloud providers and cloud consumers can trend cloud services as utilities. In comparison with existing work, semantic approach reduced the execution time by 20% and maintained the same values for all other parameters. On the other hand, dominant and recessive attributes approach reduced the execution time by 57% but showed lower value for recall.

Plant ecosystem responses to rising atmospheric CO2: applying a "two-timing" approach to assess alternative hypotheses for mechanisms of nutrient limitation

NASA Astrophysics Data System (ADS)

Medlyn, B.; Jiang, M.; Zaehle, S.

2017-12-01

There is now ample experimental evidence that the response of terrestrial vegetation to rising atmospheric CO2 concentration is modified by soil nutrient availability. How to represent nutrient cycling processes is thus a key consideration for vegetation models. We have previously used model intercomparison to demonstrate that models incorporating different assumptions predict very different responses at Free-Air CO2 Enrichment experiments. Careful examination of model outputs has provided some insight into the reasons for the different model outcomes, but it is difficult to attribute outcomes to specific assumptions. Here we investigate the impact of individual assumptions in a generic plant carbon-nutrient cycling model. The G'DAY (Generic Decomposition And Yield) model is modified to incorporate alternative hypotheses for nutrient cycling. We analyse the impact of these assumptions in the model using a simple analytical approach known as "two-timing". This analysis identifies the quasi-equilibrium behaviour of the model at the time scales of the component pools. The analysis provides a useful mathematical framework for probing model behaviour and identifying the most critical assumptions for experimental study.

Modeling the relationship between photosynthetically active radiation and global horizontal irradiance using singular spectrum analysis

NASA Astrophysics Data System (ADS)

Zempila, Melina-Maria; Taylor, Michael; Bais, Alkiviadis; Kazadzis, Stelios

2016-10-01

We report on the construction of generic models to calculate photosynthetically active radiation (PAR) from global horizontal irradiance (GHI), and vice versa. Our study took place at stations of the Greek UV network (UVNET) and the Hellenic solar energy network (HNSE) with measurements from NILU-UV multi-filter radiometers and CM pyranometers, chosen due to their long (≈1 M record/site) high temporal resolution (≈1 min) record that captures a broad range of atmospheric environments and cloudiness conditions. The uncertainty of the PAR measurements is quantified to be ±6.5% while the uncertainty involved in GHI measurements is up to ≈±7% according to the manufacturer. We show how multi-linear regression and nonlinear neural network (NN) models, trained at a calibration site (Thessaloniki) can be made generic provided that the input-output time series are processed with multi-channel singular spectrum analysis (M-SSA). Without M-SSA, both linear and nonlinear models perform well only locally. M-SSA with 50 time-lags is found to be sufficient for identification of trend, periodic and noise components in aerosol, cloud parameters and irradiance, and to construct regularized noise models of PAR from GHI irradiances. Reconstructed PAR and GHI time series capture ≈95% of the variance of the cross-validated target measurements and have median absolute percentage errors <2%. The intra-site median absolute error of M-SSA processed models were ≈8.2±1.7 W/m2 for PAR and ≈9.2±4.2 W/m2 for GHI. When applying the models trained at Thessaloniki to other stations, the average absolute mean bias between the model estimates and measured values was found to be ≈1.2 W/m2 for PAR and ≈0.8 W/m2 for GHI. For the models, percentage errors are well within the uncertainty of the measurements at all sites. Generic NN models were found to perform marginally better than their linear counterparts.

Geo-referenced multimedia environmental fate model (G-CIEMS): model formulation and comparison to the generic model and monitoring approaches.

PubMed

Suzuki, Noriyuki; Murasawa, Kaori; Sakurai, Takeo; Nansai, Keisuke; Matsuhashi, Keisuke; Moriguchi, Yuichi; Tanabe, Kiyoshi; Nakasugi, Osami; Morita, Masatoshi

2004-11-01

A spatially resolved and geo-referenced dynamic multimedia environmental fate model, G-CIEMS (Grid-Catchment Integrated Environmental Modeling System) was developed on a geographical information system (GIS). The case study for Japan based on the air grid cells of 5 x 5 km resolution and catchments with an average area of 9.3 km2, which corresponds to about 40,000 air grid cells and 38,000 river segments/catchment polygons, were performed for dioxins, benzene, 1,3-butadiene, and di-(2-ethyhexyl)phthalate. The averaged concentration of the model and monitoring output were within a factor of 2-3 for all the media. Outputs from G-CIEMS and the generic model were essentially comparable when identical parameters were employed, whereas the G-CIEMS model gave explicit information of distribution of chemicals in the environment. Exposure-weighted averaged concentrations (EWAC) in air were calculated to estimate the exposure ofthe population, based on the results of generic, G-CIEMS, and monitoring approaches. The G-CIEMS approach showed significantly better agreement with the monitoring-derived EWAC than the generic model approach. Implication for the use of a geo-referenced modeling approach in the risk assessment scheme is discussed as a generic-spatial approach, which can be used to provide more accurate exposure estimation with distribution information, using generally available data sources for a wide range of chemicals.

The Stair-Step Atom.

ERIC Educational Resources Information Center

Jordan, Thomas M.; And Others

1992-01-01

Presents a model of a generic atom that is used to represent the movement of electrons from lower to higher levels and vice-versa due to excitation and de-excitation of the atom. As the process of de-excitation takes place, photons represented by colored ping-pong balls are emitted, indicating the emission of light. (MDH)

Development and Evaluation of Computer-Based Laboratory Practical Learning Tool

ERIC Educational Resources Information Center

Gandole, Y. B.

2006-01-01

Effective evaluation of educational software is a key issue for successful introduction of advanced tools in the curriculum. This paper details to developing and evaluating a tool for computer assisted learning of science laboratory courses. The process was based on the generic instructional system design model. Various categories of educational…

Combustion Fundamentals Research

NASA Technical Reports Server (NTRS)

1983-01-01

Increased emphasis is placed on fundamental and generic research at Lewis Research Center with less systems development efforts. This is especially true in combustion research, where the study of combustion fundamentals has grown significantly in order to better address the perceived long term technical needs of the aerospace industry. The main thrusts for this combustion fundamentals program area are as follows: analytical models of combustion processes, model verification experiments, fundamental combustion experiments, and advanced numeric techniques.

Homophily and Contagion Are Generically Confounded in Observational Social Network Studies

PubMed Central

Shalizi, Cosma Rohilla; Thomas, Andrew C.

2012-01-01

The authors consider processes on social networks that can potentially involve three factors: homophily, or the formation of social ties due to matching individual traits; social contagion, also known as social influence; and the causal effect of an individual’s covariates on his or her behavior or other measurable responses. The authors show that generically, all of these are confounded with each other. Distinguishing them from one another requires strong assumptions on the parametrization of the social process or on the adequacy of the covariates used (or both). In particular the authors demonstrate, with simple examples, that asymmetries in regression coefficients cannot identify causal effects and that very simple models of imitation (a form of social contagion) can produce substantial correlations between an individual’s enduring traits and his or her choices, even when there is no intrinsic affinity between them. The authors also suggest some possible constructive responses to these results. PMID:22523436

Implementation of the Generic Safety Analysis Report - Lessons Learned

DOE Office of Scientific and Technical Information (OSTI.GOV)

Blanchard, A.

1999-06-02

The Savannah River Site has completed the development, review and approval process for the Generic Safety Analysis Report (GSAR) and implemented this information in facility SARs and BIOs. This includes the yearly revision of the GSAR and the facility-specific SARs. The process has provided us with several lessons learned.

Comparison of Six Generic Vancomycin Products for Treatment of Methicillin-Resistant Staphylococcus aureus Experimental Endocarditis in Rabbits

PubMed Central

Tattevin, P.; Saleh-Mghir, A.; Davido, B.; Ghout, I.; Massias, L.; Garcia de la Maria, C.; Miró, J. M.; Perronne, C.; Laurent, F.

2013-01-01

Concerns have recently emerged about the potency and the quality of generic vancomycin (VAN) products approved for use in humans, based on experiments in a neutropenic mouse thigh infection model. However, other animal models may be more appropriate to decipher the bactericidal activities of VAN generics in vivo and to predict their efficacy in humans. We aimed to compare the bactericidal activities of six generic VAN products currently used in France (Mylan and Sandoz), Spain (Hospira), Switzerland (Teva), and the United States (Akorn-Strides and American Pharmaceutical Products [APP]) in a rabbit model of aortic valve endocarditis induced by 8 × 107 CFU of methicillin-resistant Staphylococcus aureus (MRSA) strain COL (VAN MIC, 1.5 μg/ml). In vitro, there were no significant differences in the time-kill curve studies performed with the six generic VAN products. Ten rabbits in each group were treated with intravenous (i.v.) VAN, 60 mg/kg of body weight twice a day (b.i.d.) for 4 days. Mean peak serum VAN levels, measured 45 min after the last injection, ranged from 35.5 (APP) to 45.9 μg/ml (Teva). Mean trough serum VAN levels, measured 12 h after the last injection, ranged from 2.3 (Hospira) to 9.2 (APP) μg/ml. All generic VAN products were superior to controls (no treatment) in terms of residual organisms in vegetations (P < 0.02 for each comparison) and in the spleen (P < 0.005 for each comparison). Pairwise comparisons of generic VAN products found no significant differences. In conclusion, a stringent MRSA endocarditis model found no significant differences in the bactericidal activities of six generic VAN products currently used in Europe and America. PMID:23254435

Savannah River Site generic data base development

DOE Office of Scientific and Technical Information (OSTI.GOV)

Blanton, C.H.; Eide, S.A.

This report describes the results of a project to improve the generic component failure data base for the Savannah River Site (SRS). A representative list of components and failure modes for SRS risk models was generated by reviewing existing safety analyses and component failure data bases and from suggestions from SRS safety analysts. Then sources of data or failure rate estimates were identified and reviewed for applicability. A major source of information was the Nuclear Computerized Library for Assessing Reactor Reliability, or NUCLARR. This source includes an extensive collection of failure data and failure rate estimates for commercial nuclear powermore » plants. A recent Idaho National Engineering Laboratory report on failure data from the Idaho Chemical Processing Plant was also reviewed. From these and other recent sources, failure data and failure rate estimates were collected for the components and failure modes of interest. This information was aggregated to obtain a recommended generic failure rate distribution (mean and error factor) for each component failure mode.« less

Home detection of freezing of gait using support vector machines through a single waist-worn triaxial accelerometer

PubMed Central

Pérez-López, Carlos; Català, Andreu; Moreno Arostegui, Joan M.; Cabestany, Joan; Bayés, Àngels; Alcaine, Sheila; Mestre, Berta; Prats, Anna; Crespo, M. Cruz; Counihan, Timothy J.; Browne, Patrick; Quinlan, Leo R.; ÓLaighin, Gearóid; Sweeney, Dean; Lewy, Hadas; Azuri, Joseph; Vainstein, Gabriel; Annicchiarico, Roberta; Costa, Alberto; Rodríguez-Molinero, Alejandro

2017-01-01

Among Parkinson’s disease (PD) symptoms, freezing of gait (FoG) is one of the most debilitating. To assess FoG, current clinical practice mostly employs repeated evaluations over weeks and months based on questionnaires, which may not accurately map the severity of this symptom. The use of a non-invasive system to monitor the activities of daily living (ADL) and the PD symptoms experienced by patients throughout the day could provide a more accurate and objective evaluation of FoG in order to better understand the evolution of the disease and allow for a more informed decision-making process in making adjustments to the patient’s treatment plan. This paper presents a new algorithm to detect FoG with a machine learning approach based on Support Vector Machines (SVM) and a single tri-axial accelerometer worn at the waist. The method is evaluated through the acceleration signals in an outpatient setting gathered from 21 PD patients at their home and evaluated under two different conditions: first, a generic model is tested by using a leave-one-out approach and, second, a personalised model that also uses part of the dataset from each patient. Results show a significant improvement in the accuracy of the personalised model compared to the generic model, showing enhancement in the specificity and sensitivity geometric mean (GM) of 7.2%. Furthermore, the SVM approach adopted has been compared to the most comprehensive FoG detection method currently in use (referred to as MBFA in this paper). Results of our novel generic method provide an enhancement of 11.2% in the GM compared to the MBFA generic model and, in the case of the personalised model, a 10% of improvement with respect to the MBFA personalised model. Thus, our results show that a machine learning approach can be used to monitor FoG during the daily life of PD patients and, furthermore, personalised models for FoG detection can be used to improve monitoring accuracy. PMID:28199357

An Analysis of the Defense Logistics Agency Medical Supplies Requisition Process

DTIC Science & Technology

1991-09-01

Flowchart of the Improvement Process .... ....... 8 2. Generic Order Processing Flow .. .......... 19 3. Total Order Cycle: A Customer’s Perspective . 20 4...concentrated in the area of order processing and how it can be improved, especially in the medical supplies arena. This chapter is divided into four major...1989b:l). This time period may be also referred to as lead time, or the replenishment cycle. Figure 2 illustrates a generic order processing flow, which

Technical Note: A generic law-of-the-minimum flux limiter for simulating substrate limitation in biogeochemical models

DOE PAGES

Tang, J. Y.; Riley, W. J.

2016-02-05

We present a generic flux limiter to account for mass limitations from an arbitrary number of substrates in a biogeochemical reaction network. The flux limiter is based on the observation that substrate (e.g., nitrogen, phosphorus) limitation in biogeochemical models can be represented as to ensure mass conservative and non-negative numerical solutions to the governing ordinary differential equations. Application of the flux limiter includes two steps: (1) formulation of the biogeochemical processes with a matrix of stoichiometric coefficients and (2) application of Liebig's law of the minimum using the dynamic stoichiometric relationship of the reactants. This approach contrasts with the ad hoc down-regulationmore » approaches that are implemented in many existing models (such as CLM4.5 and the ACME (Accelerated Climate Modeling for Energy) Land Model (ALM)) of carbon and nutrient interactions, which are error prone when adding new processes, even for experienced modelers. Through an example implementation with a CENTURY-like decomposition model that includes carbon, nitrogen, and phosphorus, we show that our approach (1) produced almost identical results to that from the ad hoc down-regulation approaches under non-limiting nutrient conditions, (2) properly resolved the negative solutions under substrate-limited conditions where the simple clipping approach failed, (3) successfully avoided the potential conceptual ambiguities that are implied by those ad hoc down-regulation approaches. We expect our approach will make future biogeochemical models easier to improve and more robust.« less

Improving the Algae Bloom Prediction through the Assimilation of the Remotely Sensed Chlorophyll-A Data in a Generic Ecological Model in the North Sea

NASA Astrophysics Data System (ADS)

El Serafy, Ghada

2010-05-01

Harmful algae can cause damage to co-existing organisms, tourism and farmers. Accurate predictions of algal future composition and abundance as well as when and where algal blooms may occur could help early warning and mitigating. The Generic Ecological Model, GEM, [Blauw et al 2008] is an instrument that can be applied to any water system (fresh, transitional or coastal) to calculate the primary production, chlorophyll-a concentration and phytoplankton species composition. It consists of physical, chemical and ecological model components which are coupled together to build one generic and flexible modeling tool. For the North Sea, the model has been analyzed to assess sensitivity of the simulated chlorophyll-a concentration to a subset of ecologically significant set of factors. The research led to the definition of the most significant set of parameters to the algae blooming process in the North Sea [Salacinska et al 2009]. In order to improve the prediction of the model, the set of parameters and the chlorophyll-a concentration can be further estimated through the use of data assimilation. In this research, the Ensemble Kalman Filter (EnKF) data assimilation technique is used to assimilate the chlorophyll-a data of the North Sea, retrieved from MEdium Resolution Imaging Sensor (MERIS) spectrometer data [Peters et al 2005], in the GEM model. The chlorophyll-a data includes concentrations and error information that enable their use in data assimilation. For the same purpose, the uncertainty of the ecological generic model, GEM has been quantified by means of Monte Carlo approach. Through a study covering the year of 2003, the research demonstrates that both data and model are sufficiently robust for a successful assimilation. The results show that through the assimilation of the satellite data, a better description of the algae bloom has been achieved and an improvement of the capability of the model to predict the algae bloom for the North Sea has been confirmed. Blauw A.N., Los F.J., Bokhorst M., Erftemeijer P.L.A., (2009), GEM: a Generic Ecological Model for estuaries and coastal waters. Journal of Hydrobiologia, Volume 618, Number 1, 175-198. Peters, S.W.M., Eleveld, M. Pasterkamp, R., Woerd, H. van der, Devolder, M., Jans, S., Park, Y., Ruddick, K., Block, T., Brockmann, C., Doerffer, R., Krasemann, H., Röttgers, R., Schönfeld, W., Jørgensen, P.V., Tilstone, G., Martinez-Vicente, V., Moore, G., Sørensen, K., Høkedal, J., Johnsen, T.M., Lømsland, E.R., Aas, E. (2005). Atlas of Chlorophyll-a concentration for the North Sea based on MERIS imagery of 2003. IVM report, Vrije Universiteit Amsterdam, 117 pp. ISBN 90-5192-026-1. Salacinska K., El Serafy G.Y., Blauw A., Los F.J., (2009) Sensitivity analysis of the two dimensional application of the Generic Ecological Model (GEM) to algal bloom prediction in the North Sea, Journal of Ecological Modeling, volume 221, 7, pp 178-190, DOI: 10.1016/j.ecolmodel.2009.10.001

Dissipative dark matter halos: The steady state solution

NASA Astrophysics Data System (ADS)

Foot, R.

2018-02-01

Dissipative dark matter, where dark matter particle properties closely resemble familiar baryonic matter, is considered. Mirror dark matter, which arises from an isomorphic hidden sector, is a specific and theoretically constrained scenario. Other possibilities include models with more generic hidden sectors that contain massless dark photons [unbroken U (1 ) gauge interactions]. Such dark matter not only features dissipative cooling processes but also is assumed to have nontrivial heating sourced by ordinary supernovae (facilitated by the kinetic mixing interaction). The dynamics of dissipative dark matter halos around rotationally supported galaxies, influenced by heating as well as cooling processes, can be modeled by fluid equations. For a sufficiently isolated galaxy with a stable star formation rate, the dissipative dark matter halos are expected to evolve to a steady state configuration which is in hydrostatic equilibrium and where heating and cooling rates locally balance. Here, we take into account the major cooling and heating processes, and numerically solve for the steady state solution under the assumptions of spherical symmetry, negligible dark magnetic fields, and that supernova sourced energy is transported to the halo via dark radiation. For the parameters considered, and assumptions made, we were unable to find a physically realistic solution for the constrained case of mirror dark matter halos. Halo cooling generally exceeds heating at realistic halo mass densities. This problem can be rectified in more generic dissipative dark matter models, and we discuss a specific example in some detail.

Competition in prescription drug markets: the roles of trademarks, advertising, and generic names.

PubMed

Feldman, Roger; Lobo, Félix

2013-08-01

We take on two subjects of controversy among economists-advertising and trademarks-in the context of the market for generic drugs. We outline a model in which trademarks for drug names reduce search costs but increase product differentiation. In this particular framework, trademarks may not benefit consumers. In contrast, the generic names of drugs or "International Nonproprietary Names" (INN) have unquestionable benefits in both economic theory and empirical studies. We offer a second model where advertising of a brand-name drug creates recognition for the generic name. The monopoly patent-holder advertises less than in the absence of a competitive spillover.

A pivotal-based approach for enterprise business process and IS integration

NASA Astrophysics Data System (ADS)

Ulmer, Jean-Stéphane; Belaud, Jean-Pierre; Le Lann, Jean-Marc

2013-02-01

A company must be able to describe and react against any endogenous or exogenous event. Such flexibility can be achieved through business process management (BPM). Nevertheless a BPM approach highlights complex relations between business and IT domains. A non-alignment is exposed between heterogeneous models: this is the 'business-IT gap' as described in the literature. Through concepts from business engineering and information systems driven by models and IT, we define a generic approach ensuring multi-view consistency. Its role is to maintain and provide all information related to the structure and semantic of models. Allowing the full return of a transformed model in the sense of reverse engineering, our platform enables synchronisation between analysis model and implementation model.

Causal Models of Role Stressor Antecedents and Consequences: The Importance of Occupational Differences.

ERIC Educational Resources Information Center

Bacharach, Samuel; Bamberger, Peter

1992-01-01

Survey data from 215 nurses (10 male) and 430 civil engineers (10 female) supported the plausibility of occupation-specific models (positing direct paths between role stressors, antecedents, and consequences) compared to generic models. A weakness of generic models is the tendency to ignore differences in occupational structure and culture. (SK)

A generic model for evaluation of the Federal Aviation Administration air traffic control specialist training programs.

DOT National Transportation Integrated Search

1982-03-01

The Systems Analysis Research Unit at the Civil Aeromedical Institute (CAMI) has developed a generic model for Federal Aviation Administration (FAA) Academy training program evaluation. The model will serve as a basis for integrating the total data b...

Delay correlation analysis and representation for vital complaint VHDL models

DOEpatents

Rich, Marvin J.; Misra, Ashutosh

2004-11-09

A method and system unbind a rise/fall tuple of a VHDL generic variable and create rise time and fall time generics of each generic variable that are independent of each other. Then, according to a predetermined correlation policy, the method and system collect delay values in a VHDL standard delay file, sort the delay values, remove duplicate delay values, group the delay values into correlation sets, and output an analysis file. The correlation policy may include collecting all generic variables in a VHDL standard delay file, selecting each generic variable, and performing reductions on the set of delay values associated with each selected generic variable.

Asynchronous Data Retrieval from an Object-Oriented Database

NASA Astrophysics Data System (ADS)

Gilbert, Jonathan P.; Bic, Lubomir

We present an object-oriented semantic database model which, similar to other object-oriented systems, combines the virtues of four concepts: the functional data model, a property inheritance hierarchy, abstract data types and message-driven computation. The main emphasis is on the last of these four concepts. We describe generic procedures that permit queries to be processed in a purely message-driven manner. A database is represented as a network of nodes and directed arcs, in which each node is a logical processing element, capable of communicating with other nodes by exchanging messages. This eliminates the need for shared memory and for centralized control during query processing. Hence, the model is suitable for implementation on a multiprocessor computer architecture, consisting of large numbers of loosely coupled processing elements.

Modeling of Protection in Dynamic Simulation Using Generic Relay Models and Settings

DOE Office of Scientific and Technical Information (OSTI.GOV)

Samaan, Nader A.; Dagle, Jeffery E.; Makarov, Yuri V.

This paper shows how generic protection relay models available in planning tools can be augmented with settings that are based on NERC standards or best engineering practice. Selected generic relay models in Siemens PSS®E have been used in dynamic simulations in the proposed approach. Undervoltage, overvoltage, underfrequency, and overfrequency relays have been modeled for each generating unit. Distance-relay protection was modeled for transmission system protection. Two types of load-shedding schemes were modeled: underfrequency (frequency-responsive non-firm load shedding) and underfrequency and undervoltage firm load shedding. Several case studies are given to show the impact of protection devices on dynamic simulations. Thismore » is useful for simulating cascading outages.« less

FOSSIL2 energy policy model documentation: generic structures of the FOSSIL2 model

DOE Office of Scientific and Technical Information (OSTI.GOV)

None

1980-10-01

This report discusses the structure, derivations, assumptions, and mathematical formulation of the FOSSIL2 model. Each major facet of the model - supply/demand interactions, industry financing, and production - has been designed to parallel closely the actual cause/effect relationships determining the behavior of the United States energy system. The data base for the FOSSIL2 program is large. When possible, all data were obtained from sources well known to experts in the energy field. Cost and resource estimates are based on DOE data whenever possible. This report presents the FOSSIL2 model at several levels. In Volume I, an overview of the basicmore » structures, assumptions, and behavior of the FOSSIL2 model is presented so that the reader can understand the results of various policy tests. The discussion covers the three major building blocks, or generic structures, used to construct the model: supply/demand balance; finance and capital formation; and energy production. These structures reflect the components and interactions of the major processes within each energy industry that directly affect the dynamics of fuel supply, demand, and price within the energy system as a whole.« less

Institutional Approaches to Innovation and Change (II): The Configurational Perspective on Institution Building.

ERIC Educational Resources Information Center

Bhola, H. S.

Institution building is considered as a process amenable to both explanation and design if a generic "grammar of artifactual action" is used. The Configurational Theory of Innovation Diffusion model (CLER) is introduced and used to demonstrate how the world of the institution builder could be ordered as part of such grammar for designing…

Experiment of Enzyme Kinetics Using Guided Inquiry Model for Enhancing Generic Science Skills

NASA Astrophysics Data System (ADS)

Amida, N.; Supriyanti, F. M. T.; Liliasari

2017-02-01

This study aims to enhance generic science skills of students using guided inquiry model through experiments of enzyme kinetics. This study used quasi-experimental methods, with pretest-posttestnonequivalent control group design. Subjects of this study were chemistry students enrolled in biochemistry lab course, consisted of 18 students in experimental class and 19 students in control class. Instrument in this study were essay test that involves 5 indicators of generic science skills (i.e. direct observation, causality, symbolic language, mathematical modeling, and concepts formation) and also student worksheets. The results showed that the experiments of kinetics enzyme using guided inquiry model have been enhance generic science skills in high category with a value of average of 0.77. Four indicators classified in the high category are direct observation, causality, symbolic language, and mathematical modeling with the value of 0,73 0,70; 0,96; dan 0,85. Meanwhile, indicator of concepts formation in the medium category with a value of 0.62

Distributed Computing for Signal Processing: Modeling of Asynchronous Parallel Computation. Appendix G. On the Design and Modeling of Special Purpose Parallel Processing Systems.

DTIC Science & Technology

1985-05-01

unit in the data base, with knowing one generic assembly language. °-’--a 139 The 5-tuple describing single operation execution time of the operations...TSi-- generate , random eventi ( ,.0-15 tieit tmls - ((floa egus ()16 274 r Ispt imet imel I at :EVE’JS- II ktime=0.0; /0 present time 0/ rrs ptime=0.0...computing machinery capable of performing these tasks within a given time constraint. Because the majority of the available computing machinery is general

Generic versus branded medicines: An observational study among patients with chronic diseases attending a public hospital outpatient department

PubMed Central

Das, Manisha; Choudhury, Supriyo; Maity, Somnath; Hazra, Avijit; Pradhan, Tirthankar; Pal, Aishee; Roy, Ranendra Kumar

2017-01-01

Background: The concept of generic prescription is widely accepted in various parts of the world. Nevertheless, it has failed to gain popularity in India due to factors such as nonavailability and distrust on the product quality. However, since 2012, the Government of West Bengal, India, has initiated exclusive generic drug outlets called “fair price medicine shop” (FPMS) inside the government hospital premises in a “public-private-partnership” model. This study was undertaken to evaluate the experience and attitude of patients who were consuming generic drugs purchased from these FPMS. Materials and Methods: It was a questionnaire-based cross-sectional study where we have interviewed 100 patients each consuming generic and branded drugs, respectively. The perceived effectiveness, reported safety, medication adherence, cost of therapy, and availability of drugs was compared between two mentioned groups. Medication adherence was estimated through Drug Attitude Inventory-10. Results: 93% of generic and 87% branded drug users believed that their drugs were effective (P = 0.238) in controlling their ailments. No significant difference (9% generic, 10% branded drug users, P = 1.000) was observed in reported adverse effects between generic and branded drug users. 82% and 77% of patients were adherent generic and branded drugs, respectively (P = 0.289). As expected, a significantly lower cost of generic drugs was observed compared to its branded counterpart. Conclusion: The policy of FPMS implemented by the Government of West Bengal, India appeared to be promising in terms of perceived effectiveness, safety, and adherence of generic drugs from FPMS compared to drugs purchased from open market retailers. Therefore, this study might act as an impetus for the policy-makers to initiate similar models across the country. PMID:28250671

Comparison of generic-to-brand switchback patterns for generic and authorized generic drugs

PubMed Central

Hansen, Richard A.; Qian, Jingjing; Berg, Richard; Linneman, James; Seoane-Vazquez, Enrique; Dutcher, Sarah K.; Raofi, Saeid; Page, C. David; Peissig, Peggy

2018-01-01

Background While generic drugs are therapeutically equivalent to brand drugs, some patients and healthcare providers remain uncertain about whether they produce identical outcomes. Authorized generics, which are identical in formulation to corresponding brand drugs but marketed as a generic, provide a unique post-marketing opportunity to study whether utilization patterns are influenced by perceptions of generic drugs. Objectives To compare generic-to-brand switchback rates between generics and authorized generics. Methods A retrospective cohort study was conducted using claims and electronic health records data from a regional U.S. healthcare system. Ten drugs with authorized generics and generics marketed between 1999 and 2014 were evaluated. Eligible adult patients received a brand drug during the 6 months preceding generic entry, and then switched to a generic or authorized generic. Patients in this cohort were followed for up to 30 months from the index switch date to evaluate occurrence of generic-to-brand switchbacks. Switchback rates were compared between patients on authorized generics versus generics using Kaplan-Meier curves and Cox proportional hazards models, controlling for individual drug effects, age, sex, Charlson comorbidity score, pre-index drug use characteristics, and pre-index healthcare utilization. Results Among 5,542 unique patients that switched from brand-to-generic or brand-to-authorized generic, 264 (4.8%) switched back to the brand drug. Overall switchback rates were similar for authorized generics compared with generics (HR=0.86; 95% CI 0.65-1.15). The likelihood of switchback was higher for alendronate (HR=1.64; 95% CI 1.20-2.23) and simvastatin (HR=1.81; 95% CI 1.30-2.54) and lower for amlodipine (HR=0.27; 95% CI 0.17-0.42) compared with other drugs in the cohort. Conclusions Overall switchback rates were similar between authorized generic and generic drug users, indirectly supporting similar efficacy and tolerability profiles for brand and generic drugs. Reasons for differences in switchback rates among specific products need to be further explored. PMID:28152215

An object-oriented software for fate and exposure assessments.

PubMed

Scheil, S; Baumgarten, G; Reiter, B; Schwartz, S; Wagner, J O; Trapp, S; Matthies, M

1995-07-01

The model system CemoS(1) (Chemical Exposure Model System) was developed for the exposure prediction of hazardous chemicals released to the environment. Eight different models were implemented involving chemicals fate simulation in air, water, soil and plants after continuous or single emissions from point and diffuse sources. Scenario studies are supported by a substance and an environmental data base. All input data are checked on their plausibility. Substance and environmental process estimation functions facilitate generic model calculations. CemoS is implemented in a modular structure using object-oriented programming.

Model development, testing and experimentation in a CyberWorkstation for Brain-Machine Interface research.

PubMed

Rattanatamrong, Prapaporn; Matsunaga, Andrea; Raiturkar, Pooja; Mesa, Diego; Zhao, Ming; Mahmoudi, Babak; Digiovanna, Jack; Principe, Jose; Figueiredo, Renato; Sanchez, Justin; Fortes, Jose

2010-01-01

The CyberWorkstation (CW) is an advanced cyber-infrastructure for Brain-Machine Interface (BMI) research. It allows the development, configuration and execution of BMI computational models using high-performance computing resources. The CW's concept is implemented using a software structure in which an "experiment engine" is used to coordinate all software modules needed to capture, communicate and process brain signals and motor-control commands. A generic BMI-model template, which specifies a common interface to the CW's experiment engine, and a common communication protocol enable easy addition, removal or replacement of models without disrupting system operation. This paper reviews the essential components of the CW and shows how templates can facilitate the processes of BMI model development, testing and incorporation into the CW. It also discusses the ongoing work towards making this process infrastructure independent.

Generic Tasks for Knowledge-Based Problem Solving: Extension and New Directions

DTIC Science & Technology

1991-02-01

Report. i 3] D. Brown and B. Chandrasekaran. Design: An information processing level analy- sis. In Design Problem Solving: Knowledge Structures and...generic information processing tasks. In Proceedings of the Internaoional Joint Conference on Artificial Inte!lzjence. IJCAI, 1987. [181 B...Chandrasekaran. What kind of information processing is intelligence? a perspective I on ai paradigms and a proposal. In D. Partridge and Y. Wilks, editors

Impact on Bacterial Resistance of Therapeutically Nonequivalent Generics: The Case of Piperacillin-Tazobactam

PubMed Central

Rodriguez, Carlos A.; Agudelo, Maria; Aguilar, Yudy A.; Zuluaga, Andres F.

2016-01-01

Previous studies have demonstrated that pharmaceutical equivalence and pharmacokinetic equivalence of generic antibiotics are necessary but not sufficient conditions to guarantee therapeutic equivalence (better called pharmacodynamic equivalence). In addition, there is scientific evidence suggesting a direct link between pharmacodynamic nonequivalence of generic vancomycin and promotion of resistance in Staphylococcus aureus. To find out if even subtle deviations from the expected pharmacodynamic behavior with respect to the innovator could favor resistance, we studied a generic product of piperacillin-tazobactam characterized by pharmaceutical and pharmacokinetic equivalence but a faulty fit of Hill’s Emax sigmoid model that could be interpreted as pharmacodynamic nonequivalence. We determined the impact in vivo of this generic product on the resistance of a mixed Escherichia coli population composed of ∼99% susceptible cells (ATCC 35218 strain) and a ∼1% isogenic resistant subpopulation that overproduces TEM-1 β-lactamase. After only 24 hours of treatment in the neutropenic murine thigh infection model, the generic amplified the resistant subpopulation up to 20-times compared with the innovator, following an inverted-U dose-response relationship. These findings highlight the critical role of therapeutic nonequivalence of generic antibiotics as a key factor contributing to the global problem of bacterial resistance. PMID:27191163

Canada's New Generic Pricing Policy: A Reasoned Approach to a Challenging Problem.

PubMed

Hollis, Aidan; Grootendorst, Paul

2015-08-01

Alberta, quickly followed by other Canadian provinces, has introduced a new pricing model for generic drugs, in which prices are inversely related to the number of generic manufacturers of the drug. This paper examines the rationale for the new policy. Copyright © 2015 Longwoods Publishing.

A Deformable Generic 3D Model of Haptoral Anchor of Monogenean

PubMed Central

Teo, Bee Guan; Dhillon, Sarinder Kaur; Lim, Lee Hong Susan

2013-01-01

In this paper, a digital 3D model which allows for visualisation in three dimensions and interactive manipulation is explored as a tool to help us understand the structural morphology and elucidate the functions of morphological structures of fragile microorganisms which defy live studies. We developed a deformable generic 3D model of haptoral anchor of dactylogyridean monogeneans that can subsequently be deformed into different desired anchor shapes by using direct manipulation deformation technique. We used point primitives to construct the rectangular building blocks to develop our deformable 3D model. Point primitives are manually marked on a 2D illustration of an anchor on a Cartesian graph paper and a set of Cartesian coordinates for each point primitive is manually extracted from the graph paper. A Python script is then written in Blender to construct 3D rectangular building blocks based on the Cartesian coordinates. The rectangular building blocks are stacked on top or by the side of each other following their respective Cartesian coordinates of point primitive. More point primitives are added at the sites in the 3D model where more structural variations are likely to occur, in order to generate complex anchor structures. We used Catmull-Clark subdivision surface modifier to smoothen the surface and edge of the generic 3D model to obtain a smoother and more natural 3D shape and antialiasing option to reduce the jagged edges of the 3D model. This deformable generic 3D model can be deformed into different desired 3D anchor shapes through direct manipulation deformation technique by aligning the vertices (pilot points) of the newly developed deformable generic 3D model onto the 2D illustrations of the desired shapes and moving the vertices until the desire 3D shapes are formed. In this generic 3D model all the vertices present are deployed for displacement during deformation. PMID:24204903

A deformable generic 3D model of haptoral anchor of Monogenean.

PubMed

Teo, Bee Guan; Dhillon, Sarinder Kaur; Lim, Lee Hong Susan

2013-01-01

In this paper, a digital 3D model which allows for visualisation in three dimensions and interactive manipulation is explored as a tool to help us understand the structural morphology and elucidate the functions of morphological structures of fragile microorganisms which defy live studies. We developed a deformable generic 3D model of haptoral anchor of dactylogyridean monogeneans that can subsequently be deformed into different desired anchor shapes by using direct manipulation deformation technique. We used point primitives to construct the rectangular building blocks to develop our deformable 3D model. Point primitives are manually marked on a 2D illustration of an anchor on a Cartesian graph paper and a set of Cartesian coordinates for each point primitive is manually extracted from the graph paper. A Python script is then written in Blender to construct 3D rectangular building blocks based on the Cartesian coordinates. The rectangular building blocks are stacked on top or by the side of each other following their respective Cartesian coordinates of point primitive. More point primitives are added at the sites in the 3D model where more structural variations are likely to occur, in order to generate complex anchor structures. We used Catmull-Clark subdivision surface modifier to smoothen the surface and edge of the generic 3D model to obtain a smoother and more natural 3D shape and antialiasing option to reduce the jagged edges of the 3D model. This deformable generic 3D model can be deformed into different desired 3D anchor shapes through direct manipulation deformation technique by aligning the vertices (pilot points) of the newly developed deformable generic 3D model onto the 2D illustrations of the desired shapes and moving the vertices until the desire 3D shapes are formed. In this generic 3D model all the vertices present are deployed for displacement during deformation.

Discontinuous non-equilibrium phase transition in a threshold Schloegl model for autocatalysis: Generic two-phase coexistence and metastability

DOE PAGES

Wang, Chi -Jen; Liu, Da -Jiang; Evans, James W.

2015-04-28

Threshold versions of Schloegl’s model on a lattice, which involve autocatalytic creation and spontaneous annihilation of particles, can provide a simple prototype for discontinuous non-equilibrium phase transitions. These models are equivalent to so-called threshold contact processes. A discontinuous transition between populated and vacuum states can occur selecting a threshold of N ≥ 2 for the minimum number, N, of neighboring particles enabling autocatalytic creation at an empty site. Fundamental open questions remain given the lack of a thermodynamic framework for analysis. For a square lattice with N = 2, we show that phase coexistence occurs not at a unique valuemore » but for a finite range of particle annihilation rate (the natural control parameter). This generic two-phase coexistence also persists when perturbing the model to allow spontaneous particle creation. Such behavior contrasts both the Gibbs phase rule for thermodynamic systems and also previous analysis for this model. We find metastability near the transition corresponding to a non-zero effective line tension, also contrasting previously suggested critical behavior. As a result, mean-field type analysis, extended to treat spatially heterogeneous states, further elucidates model behavior.« less

Discontinuous non-equilibrium phase transition in a threshold Schloegl model for autocatalysis: Generic two-phase coexistence and metastability

NASA Astrophysics Data System (ADS)

Wang, Chi-Jen; Liu, Da-Jiang; Evans, James W.

2015-04-01

Threshold versions of Schloegl's model on a lattice, which involve autocatalytic creation and spontaneous annihilation of particles, can provide a simple prototype for discontinuous non-equilibrium phase transitions. These models are equivalent to so-called threshold contact processes. A discontinuous transition between populated and vacuum states can occur selecting a threshold of N ≥ 2 for the minimum number, N, of neighboring particles enabling autocatalytic creation at an empty site. Fundamental open questions remain given the lack of a thermodynamic framework for analysis. For a square lattice with N = 2, we show that phase coexistence occurs not at a unique value but for a finite range of particle annihilation rate (the natural control parameter). This generic two-phase coexistence also persists when perturbing the model to allow spontaneous particle creation. Such behavior contrasts both the Gibbs phase rule for thermodynamic systems and also previous analysis for this model. We find metastability near the transition corresponding to a non-zero effective line tension, also contrasting previously suggested critical behavior. Mean-field type analysis, extended to treat spatially heterogeneous states, further elucidates model behavior.

Extraterrestrials and Generic Social Processes: Minimizing Resistance in Teaching the Reproduction of Inequality

ERIC Educational Resources Information Center

Parrotta, Kylie L.; Rusche, Sarah Nell

2011-01-01

In this article, the authors describe a class activity that uses a combination of strategies to overcome obstacles students face when learning about the reproduction of inequality in everyday life. Based on Schwalbe et al.'s (2000) piece on "generic social processes," and following the idea of "making the strange familiar and the familiar…

Synthesizing cognition in neuromorphic electronic systems

PubMed Central

Neftci, Emre; Binas, Jonathan; Rutishauser, Ueli; Chicca, Elisabetta; Indiveri, Giacomo; Douglas, Rodney J.

2013-01-01

The quest to implement intelligent processing in electronic neuromorphic systems lacks methods for achieving reliable behavioral dynamics on substrates of inherently imprecise and noisy neurons. Here we report a solution to this problem that involves first mapping an unreliable hardware layer of spiking silicon neurons into an abstract computational layer composed of generic reliable subnetworks of model neurons and then composing the target behavioral dynamics as a “soft state machine” running on these reliable subnets. In the first step, the neural networks of the abstract layer are realized on the hardware substrate by mapping the neuron circuit bias voltages to the model parameters. This mapping is obtained by an automatic method in which the electronic circuit biases are calibrated against the model parameters by a series of population activity measurements. The abstract computational layer is formed by configuring neural networks as generic soft winner-take-all subnetworks that provide reliable processing by virtue of their active gain, signal restoration, and multistability. The necessary states and transitions of the desired high-level behavior are then easily embedded in the computational layer by introducing only sparse connections between some neurons of the various subnets. We demonstrate this synthesis method for a neuromorphic sensory agent that performs real-time context-dependent classification of motion patterns observed by a silicon retina. PMID:23878215

Multiple criteria decision analysis for health technology assessment.

PubMed

Thokala, Praveen; Duenas, Alejandra

2012-12-01

Multicriteria decision analysis (MCDA) has been suggested by some researchers as a method to capture the benefits beyond quality adjusted life-years in a transparent and consistent manner. The objectives of this article were to analyze the possible application of MCDA approaches in health technology assessment and to describe their relative advantages and disadvantages. This article begins with an introduction to the most common types of MCDA models and a critical review of state-of-the-art methods for incorporating multiple criteria in health technology assessment. An overview of MCDA is provided and is compared against the current UK National Institute for Health and Clinical Excellence health technology appraisal process. A generic MCDA modeling approach is described, and the different MCDA modeling approaches are applied to a hypothetical case study. A comparison of the different MCDA approaches is provided, and the generic issues that need consideration before the application of MCDA in health technology assessment are examined. There are general practical issues that might arise from using an MCDA approach, and it is suggested that appropriate care be taken to ensure the success of MCDA techniques in the appraisal process. Copyright © 2012 International Society for Pharmacoeconomics and Outcomes Research (ISPOR). Published by Elsevier Inc. All rights reserved.

The human role in space (THURIS) applications study. Final briefing

NASA Technical Reports Server (NTRS)

Maybee, George W.

1987-01-01

The THURIS (The Human Role in Space) application is an iterative process involving successive assessments of man/machine mixes in terms of performance, cost and technology to arrive at an optimum man/machine mode for the mission application. The process begins with user inputs which define the mission in terms of an event sequence and performance time requirements. The desired initial operational capability date is also an input requirement. THURIS terms and definitions (e.g., generic activities) are applied to the input data converting it into a form which can be analyzed using the THURIS cost model outputs. The cost model produces tabular and graphical outputs for determining the relative cost-effectiveness of a given man/machine mode and generic activity. A technology database is provided to enable assessment of support equipment availability for selected man/machine modes. If technology gaps exist for an application, the database contains information supportive of further investigation into the relevant technologies. The present study concentrated on testing and enhancing the THURIS cost model and subordinate data files and developing a technology database which interfaces directly with the user via technology readiness displays. This effort has resulted in a more powerful, easy-to-use applications system for optimization of man/machine roles. Volume 1 is an executive summary.

Tree-Structured Digital Organisms Model

NASA Astrophysics Data System (ADS)

Suzuki, Teruhiko; Nobesawa, Shiho; Tahara, Ikuo

Tierra and Avida are well-known models of digital organisms. They describe a life process as a sequence of computation codes. A linear sequence model may not be the only way to describe a digital organism, though it is very simple for a computer-based model. Thus we propose a new digital organism model based on a tree structure, which is rather similar to the generic programming. With our model, a life process is a combination of various functions, as if life in the real world is. This implies that our model can easily describe the hierarchical structure of life, and it can simulate evolutionary computation through mutual interaction of functions. We verified our model by simulations that our model can be regarded as a digital organism model according to its definitions. Our model even succeeded in creating species such as viruses and parasites.

Application of process mapping to understand integration of high risk medicine care bundles within community pharmacy practice.

PubMed

Weir, Natalie M; Newham, Rosemary; Corcoran, Emma D; Ali Atallah Al-Gethami, Ashwag; Mohammed Abd Alridha, Ali; Bowie, Paul; Watson, Anne; Bennie, Marion

2017-11-21

The Scottish Patient Safety Programme - Pharmacy in Primary Care collaborative is a quality improvement initiative adopting the Institute of Healthcare Improvement Breakthrough Series collaborative approach. The programme developed and piloted High Risk Medicine (HRM) Care Bundles (CB), focused on warfarin and non-steroidal anti-inflammatories (NSAIDs), within 27 community pharmacies over 4 NHS Regions. Each CB involves clinical assessment and patient education, although the CB content varies between regions. To support national implementation, this study aims to understand how the pilot pharmacies integrated the HRM CBs into routine practice to inform the development of a generic HRM CB process map. Regional process maps were developed in 4 pharmacies through simulation of the CB process, staff interviews and documentation of resources. Commonalities were collated to develop a process map for each HRM, which were used to explore variation at a national event. A single, generic process map was developed which underwent validation by case study testing. The findings allowed development of a generic process map applicable to warfarin and NSAID CB implementation. Five steps were identified as required for successful CB delivery: patient identification; clinical assessment; pharmacy CB prompt; CB delivery; and documentation. The generic HRM CB process map encompasses the staff and patients' journey and the CB's integration into routine community pharmacy practice. Pharmacist involvement was required only for clinical assessment, indicating suitability for whole-team involvement. Understanding CB integration into routine practice has positive implications for successful implementation. The generic process map can be used to develop targeted resources, and/or be disseminated to facilitate CB delivery and foster whole team involvement. Similar methods could be utilised within other settings, to allow those developing novel services to distil the key processes and consider their integration within routine workflows to effect maximal, efficient implementation and benefit to patient care. Copyright © 2017 Elsevier Inc. All rights reserved.

Scenario tree model for animal disease freedom framed in the OIE context using the example of a generic swine model for Aujeszky's disease in commercial swine in Canada.

PubMed

Christensen, Jette; Vallières, André

2016-01-01

"Freedom from animal disease" is an ambiguous concept that may have a different meaning in trade and science. For trade alone, there are different levels of freedom from OIE listed diseases. A country can: be recognized by OIE to be "officially free"; self-declare freedom, with no official recognition by the OIE; or report animal disease as absent (no occurrence) in six-monthly reports. In science, we apply scenario tree models to calculate the probability of a population being free from disease at a given prevalence to provide evidence of freedom from animal disease. Here, we link science with application by describing how a scenario tree model may contribute to a country's claim of freedom from animal disease. We combine the idea of a standardized presentation of scenario tree models for disease freedom and having a similar model for two different animal diseases to suggest that a simple generic model may help veterinary authorities to build and evaluate scenario tree models for disease freedom. Here, we aim to develop a generic scenario tree model for disease freedom that is: animal species specific, population specific, and has a simple structure. The specific objectives were: to explore the levels of freedom described in the OIE Terrestrial Animal Health Code; to describe how scenario tree models may contribute to a country's claim of freedom from animal disease; and to present a generic swine scenario tree model for disease freedom in Canada's domestic (commercial) swine applied to Aujeszky's disease (AD). In particular, to explore how historical survey data, and data mining may affect the probability of freedom and to explore different sampling strategies. Finally, to frame the generic scenario tree model in the context of Canada's claim of freedom from AD. We found that scenario tree models are useful to support a country's claim of freedom either as "recognized officially free" or as part of a self-declaration but the models should not stand alone in a claim. The generic AD scenario tree model demonstrated the benefit of combining three sources of surveillance data and helped to design the surveillance for the next year. The generic AD scenario model is one piece in Canada's self-declaration of freedom from AD. The model is strongly supported by the fact that AD has never been detected in Canada. Crown Copyright © 2015. Published by Elsevier B.V. All rights reserved.

Nuclear Criticality Safety Data Book

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hollenbach, D. F.

The objective of this document is to support the revision of criticality safety process studies (CSPSs) for the Uranium Processing Facility (UPF) at the Y-12 National Security Complex (Y-12). This design analysis and calculation (DAC) document contains development and justification for generic inputs typically used in Nuclear Criticality Safety (NCS) DACs to model both normal and abnormal conditions of processes at UPF to support CSPSs. This will provide consistency between NCS DACs and efficiency in preparation and review of DACs, as frequently used data are provided in one reference source.

A pharmaco-economic analysis of patients with schizophrenia switching to generic risperidone involving a possible compliance loss.

PubMed

Treur, Maarten; Heeg, Bart; Möller, Hans-Jürgen; Schmeding, Annette; van Hout, Ben

2009-02-18

As schizophrenia patients are typically suspicious of, or are hostile to changes they may be reluctant to accept generic substitution, possibly affecting compliance. This may counteract drug costs savings due to less symptom control and increased hospitalization risk. Although compliance losses following generic substitution have not been quantified so far, one can estimate the possible health-economic consequences. The current study aims to do so by considering the case of risperidone in Germany. An existing DES model was adapted to compare staying on branded risperidone with generic substitution. Differences include the probability of non-compliance and medication costs. Incremental probability of non-compliance after generic substitution was varied between 2.5% and 10%, while generic medication costs were assumed to be 40% lower. Effect of medication price was assessed as well as the effect of applying compliance losses to all treatment settings. The probability of staying on branded risperidone being cost-effective was calculated for various outcomes of a hypothetical study that would investigate non-compliance following generic substitution of risperidone. If the incremental probability of non-compliance after generic substitution is 2.5%, 5.0%, 7.5% and 10% respectively, incremental effects of staying on branded risperidone are 0.004, 0.007, 0.011 and 0.015 Quality Adjusted Life Years (QALYs). Incremental costs are euro757, euro343, -euro123 and -euro554 respectively. Benefits of staying on branded risperidone include improved symptom control and fewer hospitalizations. If generic substitution results in a 5.2% higher probability of non-compliance, the model predicts staying on branded risperidone to be cost-effective (NICE threshold of 30,000 per QALY gained). Compliance losses of more than 6.9% makes branded risperidone the dominant alternative. Results are sensitive to the locations at which compliance loss is applied and the price of generic risperidone. The probability that staying on branded risperidone is cost-effective would increase with larger compliance differences and more patients included in the hypothetical study. The model predicts that it is cost-effective to keep a patient with schizophrenia in Germany on branded risperidone instead of switching him/her to generic risperidone (assuming a 40% reduction in medication costs), if the incremental probability of becoming non-compliant after generic substitution exceeds 5.2%.

Explaining mortality rate plateaus

PubMed Central

Weitz, Joshua S.; Fraser, Hunter B.

2001-01-01

We propose a stochastic model of aging to explain deviations from exponential growth in mortality rates commonly observed in empirical studies. Mortality rate plateaus are explained as a generic consequence of considering death in terms of first passage times for processes undergoing a random walk with drift. Simulations of populations with age-dependent distributions of viabilities agree with a wide array of experimental results. The influence of cohort size is well accounted for by the stochastic nature of the model. PMID:11752476

A Best Practices Model for Implementing Successful Electronic Disease Surveillance Systems: Insights from Peru and Around the Globe

DTIC Science & Technology

2013-06-03

associated Program design: Kenya . and written project with improved I) Generic model should be adaptable documentation. diagnosis or treatment. to local...potential for and threats to development through an unsustainable and 3) Gaps in evaluation in area of building sustainable to performance -based...implementation in developing countries by building a framework that will identify key elements in this process and serve as guidance to implementers. This study

Hardware-in-the-Loop Power Extraction Using Different Real-Time Platforms (PREPRINT)

DTIC Science & Technology

2008-07-01

engine controller ( FADEC ). Incorporating various transient subsystem level models into a complex modeling tool can be a challenging process when each...used can also be modified or replaced as appropriate. In its current configuration, the generic turbine engine model’s FADEC runs primarily on a...simulation in real-time, two platforms were tested: dSPACE and National Instruments’ (NI) LabVIEW Real-Time. For both dSPACE and NI, the engine and FADEC

Software-as-a-Service Vendors: Are They Ready to Successfully Deliver?

NASA Astrophysics Data System (ADS)

Heart, Tsipi; Tsur, Noa Shamir; Pliskin, Nava

Software as a service (SaaS) is a software sourcing option that allows organizations to remotely access enterprise applications, without having to install the application in-house. In this work we study vendors' readiness to deliver SaaS, a topic scarcely studied before. The innovation classification (evolutionary vs. revolutionary) and a new, Seven Fundamental Organizational Capabilities (FOCs) Model, are used as the theoretical frameworks. The Seven FOCs model suggests generic yet comprehensive set of capabilities that are required for organizational success: 1) sensing the stakeholders, 2) sensing the business environment, 3) sensing the knowledge environment, 4) process control, 5) process improvement, 6) new process development, and 7) appropriate resolution.

Relevance of various animal models of human infections to establish therapeutic equivalence of a generic product of piperacillin/tazobactam.

PubMed

Agudelo, Maria; Rodriguez, Carlos A; Zuluaga, Andres F; Vesga, Omar

2015-02-01

After demonstrating with diverse intravenous antibacterials that pharmaceutical equivalence (PE) does not predict therapeutic equivalence, we tested a single generic product of piperacillin/tazobactam (TZP) in terms of PE, pharmacokinetics and in vitro/vivo pharmacodynamics against several pathogens in neutropenic mouse thigh, lung and brain infection models. A generic product was compared head-to-head against the innovator. PE was evaluated by microbiological assay. Single-dose serum pharmacokinetics were determined in infected mice, and the MIC/MBC were determined by broth microdilution. In vivo experiments were done in a blind fashion. Reproducibility was tested on different days using different infecting organisms and animal models. Neutropenic MPF mice were infected in the thighs with Staphylococcus aureus GRP-0057 or Pseudomonas aeruginosa PA01 and in the lungs or brain with Klebsiella pneumoniae ATCC 10031. Treatment started 2h (thigh and brain) or 14 h (lung) after infection and was administered every 3h over 24h (thigh and lung) or 48 h (brain). Both products exhibited the same MIC/MBC against each strain, yielded overlaid curves in the microbiological assay (P>0.21) and were bioequivalent (IC90 83-117% for AUC test/reference ratio). In vivo, the generic product and innovator were again undistinguishable in all models and against the different bacterial pathogens involved. The relevance of these neutropenic murine models of infection was established by demonstrating their accuracy to predict the biological response following simultaneous treatment with a generic product or the innovator of TZP. Therapeutic equivalence of the generic product was proved in every model and against different pathogens. Copyright © 2014 Elsevier B.V. and the International Society of Chemotherapy. All rights reserved.

Nonequilibrium thermodynamics of the shear-transformation-zone model

NASA Astrophysics Data System (ADS)

Luo, Alan M.; Ã-ttinger, Hans Christian

2014-02-01

The shear-transformation-zone (STZ) model has been applied numerous times to describe the plastic deformation of different types of amorphous systems. We formulate this model within the general equation for nonequilibrium reversible-irreversible coupling (GENERIC) framework, thereby clarifying the thermodynamic structure of the constitutive equations and guaranteeing thermodynamic consistency. We propose natural, physically motivated forms for the building blocks of the GENERIC, which combine to produce a closed set of time evolution equations for the state variables, valid for any choice of free energy. We demonstrate an application of the new GENERIC-based model by choosing a simple form of the free energy. In addition, we present some numerical results and contrast those with the original STZ equations.

A generic simulation model to assess the performance of sterilization services in health establishments.

PubMed

Di Mascolo, Maria; Gouin, Alexia

2013-03-01

The work presented here is with a view to improving performance of sterilization services in hospitals. We carried out a survey in a large number of health establishments in the Rhône-Alpes region in France. Based on the results of this survey and a detailed study of a specific service, we have built a generic model. The generic nature of the model relies on a common structure with a high level of detail. This model can be used to improve the performance of a specific sterilization service and/or to dimension its resources. It can also serve for quantitative comparison of performance indicators of various sterilization services.

Characterizing Learning Environments Capable of Nurturing Generic Capabilities in Higher Education

ERIC Educational Resources Information Center

Kember, David; Leung, Doris Y. P.; Ma, Rosa S. F.

2007-01-01

There has been wide recognition that today's graduates need the type of generic capabilities necessary for lifelong learning. However, the mechanism by which universities can develop these generic skills is not clearly established. This study aimed to investigate the mechanism for their development. Structural equation modeling (SEM) was used to…

Characterisation of the n-colour printing process using the spot colour overprint model.

PubMed

Deshpande, Kiran; Green, Phil; Pointer, Michael R

2014-12-29

This paper is aimed at reproducing the solid spot colours using the n-colour separation. A simplified numerical method, called as the spot colour overprint (SCOP) model, was used for characterising the n-colour printing process. This model was originally developed for estimating the spot colour overprints. It was extended to be used as a generic forward characterisation model for the n-colour printing process. The inverse printer model based on the look-up table was implemented to obtain the colour separation for n-colour printing process. Finally the real-world spot colours were reproduced using 7-colour separation on lithographic offset printing process. The colours printed with 7 inks were compared against the original spot colours to evaluate the accuracy. The results show good accuracy with the mean CIEDE2000 value between the target colours and the printed colours of 2.06. The proposed method can be used successfully to reproduce the spot colours, which can potentially save significant time and cost in the printing and packaging industry.

Modeling chemical accumulation in sediment of small waterbodies accounting for sediment transport and water-sediment exchange processes over long periods.

PubMed

Patterson, David Albert; Strehmel, Alexander; Erzgräber, Beate; Hammel, Klaus

2017-12-01

In a recent scientific opinion of the European Food Safety Authority it is argued that the accumulation of plant protection products in sediments over long time periods may be an environmentally significant process. Therefore, the European Food Safety Authority proposed a calculation to account for plant protection product accumulation. This calculation, however, considers plant protection product degradation within sediment as the only dissipation route, and does not account for sediment dynamics or back-diffusion into the water column. The hydraulic model Hydrologic Engineering Center-River Analysis System (HEC-RAS; US Army Corps of Engineers) was parameterized to assess sediment transport and deposition dynamics within the FOrum for Co-ordination of pesticide fate models and their USe (FOCUS) scenarios in simulations spanning 20 yr. The results show that only 10 to 50% of incoming sediment would be deposited. The remaining portion of sediment particles is transported across the downstream boundary. For a generic plant protection product substance this resulted in deposition of only 20 to 50% of incoming plant protection product substance. In a separate analysis, the FOCUS TOXSWA model was utilized to examine the relative importance of degradation versus back-diffusion as loss processes from the sediment compartment for a diverse range of generic plant protection products. In simulations spanning 20 yr, it was shown that back-diffusion was generally the dominant dissipation process. The results of the present study show that sediment dynamics and back-diffusion should be considered when calculating long-term plant protection product accumulation in sediment. Neglecting these may lead to a systematic overestimation of accumulation. Environ Toxicol Chem 2017;36:3223-3231. © 2017 SETAC. © 2017 SETAC.

Forecasting the (un)productivity of the 2014 M 6.0 South Napa aftershock sequence

USGS Publications Warehouse

Llenos, Andrea L.; Michael, Andrew J.

2017-01-01

The 24 August 2014 Mw 6.0 South Napa mainshock produced fewer aftershocks than expected for a California earthquake of its magnitude. In the first 4.5 days, only 59 M≥1.8 aftershocks occurred, the largest of which was an M 3.9 that happened a little over two days after the mainshock. We investigate the aftershock productivity of the South Napa sequence and compare it with other M≥5.5 California strike‐slip mainshock–aftershock sequences. While the productivity of the South Napa sequence is among the lowest, northern California mainshocks generally have fewer aftershocks than mainshocks further south, although the productivities vary widely in both regions. An epidemic‐type aftershock sequence (ETAS) model (Ogata, 1988) fit to Napa seismicity from 1980 to 23 August 2014 fits the sequence well and suggests that low‐productivity sequences are typical of this area. Utilizing regional variations in productivity could improve operational earthquake forecasting (OEF) by improving the model used immediately after the mainshock. We show this by comparing the daily rate of M≥2 aftershocks to forecasts made with the generic California model (Reasenberg and Jones, 1989; hereafter, RJ89), RJ89 models with productivity updated daily, a generic California ETAS model, an ETAS model based on premainshock seismicity, and ETAS models updated daily following the mainshock. RJ89 models for which only the productivity is updated provide better forecasts than the generic RJ89 California model, and the Napa‐specific ETAS models forecast the aftershock rates more accurately than either generic model. Therefore, forecasts that use localized initial parameters and that rapidly update the productivity may be better for OEF than using a generic model and/or updating all parameters.

Process Materialization Using Templates and Rules to Design Flexible Process Models

NASA Astrophysics Data System (ADS)

Kumar, Akhil; Yao, Wen

The main idea in this paper is to show how flexible processes can be designed by combining generic process templates and business rules. We instantiate a process by applying rules to specific case data, and running a materialization algorithm. The customized process instance is then executed in an existing workflow engine. We present an architecture and also give an algorithm for process materialization. The rules are written in a logic-based language like Prolog. Our focus is on capturing deeper process knowledge and achieving a holistic approach to robust process design that encompasses control flow, resources and data, as well as makes it easier to accommodate changes to business policy.

Models of stochastic gene expression

NASA Astrophysics Data System (ADS)

Paulsson, Johan

2005-06-01

Gene expression is an inherently stochastic process: Genes are activated and inactivated by random association and dissociation events, transcription is typically rare, and many proteins are present in low numbers per cell. The last few years have seen an explosion in the stochastic modeling of these processes, predicting protein fluctuations in terms of the frequencies of the probabilistic events. Here I discuss commonalities between theoretical descriptions, focusing on a gene-mRNA-protein model that includes most published studies as special cases. I also show how expression bursts can be explained as simplistic time-averaging, and how generic approximations can allow for concrete interpretations without requiring concrete assumptions. Measures and nomenclature are discussed to some extent and the modeling literature is briefly reviewed.

Motivating the Notion of Generic Design within Information Processing Theory: The Design Problem Space.

ERIC Educational Resources Information Center

Goel, Vinod; Pirolli, Peter

The notion of generic design, while it has been around for 25 years, is not often articulated, especially within Newell and Simon's (1972) Information Processing Theory framework. Design is merely lumped in with other forms of problem solving activity. Intuitively it is felt that there should be a level of description of the phenomenon which…

Environmental modeling and recognition for an autonomous land vehicle

NASA Technical Reports Server (NTRS)

Lawton, D. T.; Levitt, T. S.; Mcconnell, C. C.; Nelson, P. C.

1987-01-01

An architecture for object modeling and recognition for an autonomous land vehicle is presented. Examples of objects of interest include terrain features, fields, roads, horizon features, trees, etc. The architecture is organized around a set of data bases for generic object models and perceptual structures, temporary memory for the instantiation of object and relational hypotheses, and a long term memory for storing stable hypotheses that are affixed to the terrain representation. Multiple inference processes operate over these databases. Researchers describe these particular components: the perceptual structure database, the grouping processes that operate over this, schemas, and the long term terrain database. A processing example that matches predictions from the long term terrain model to imagery, extracts significant perceptual structures for consideration as potential landmarks, and extracts a relational structure to update the long term terrain database is given.

Pharmaceutical expenditure forecast model to support health policy decision making.

PubMed

Rémuzat, Cécile; Urbinati, Duccio; Kornfeld, Åsa; Vataire, Anne-Lise; Cetinsoy, Laurent; Aballéa, Samuel; Mzoughi, Olfa; Toumi, Mondher

2014-01-01

With constant incentives for healthcare payers to contain their pharmaceutical budgets, modelling policy decision impact became critical. The objective of this project was to test the impact of various policy decisions on pharmaceutical budget (developed for the European Commission for the project 'European Union (EU) Pharmaceutical expenditure forecast' - http://ec.europa.eu/health/healthcare/key_documents/index_en.htm). A model was built to assess policy scenarios' impact on the pharmaceutical budgets of seven member states of the EU, namely France, Germany, Greece, Hungary, Poland, Portugal, and the United Kingdom. The following scenarios were tested: expanding the UK policies to EU, changing time to market access, modifying generic price and penetration, shifting the distribution chain of biosimilars (retail/hospital). Applying the UK policy resulted in dramatic savings for Germany (10 times the base case forecast) and substantial additional savings for France and Portugal (2 and 4 times the base case forecast, respectively). Delaying time to market was found be to a very powerful tool to reduce pharmaceutical expenditure. Applying the EU transparency directive (6-month process for pricing and reimbursement) increased pharmaceutical expenditure for all countries (from 1.1 to 4 times the base case forecast), except in Germany (additional savings). Decreasing the price of generics and boosting the penetration rate, as well as shifting distribution of biosimilars through hospital chain were also key methods to reduce pharmaceutical expenditure. Change in the level of reimbursement rate to 100% in all countries led to an important increase in the pharmaceutical budget. Forecasting pharmaceutical expenditure is a critical exercise to inform policy decision makers. The most important leverages identified by the model on pharmaceutical budget were driven by generic and biosimilar prices, penetration rate, and distribution. Reducing, even slightly, the prices of generics had a major impact on savings. However, very aggressive pricing of generic and biosimilar products might make this market unattractive and can be counterproductive. Worth noting, delaying time to access innovative products was also identified as an effective leverage to increase savings but might not be a desirable policy for breakthrough products. Increasing patient financial contributions, either directly or indirectly via their private insurances, is a more likely scenario rather than expanding the national pharmaceutical expenditure coverage.

Pharmaceutical expenditure forecast model to support health policy decision making

PubMed Central

Rémuzat, Cécile; Urbinati, Duccio; Kornfeld, Åsa; Vataire, Anne-Lise; Cetinsoy, Laurent; Aballéa, Samuel; Mzoughi, Olfa; Toumi, Mondher

2014-01-01

Background and objective With constant incentives for healthcare payers to contain their pharmaceutical budgets, modelling policy decision impact became critical. The objective of this project was to test the impact of various policy decisions on pharmaceutical budget (developed for the European Commission for the project ‘European Union (EU) Pharmaceutical expenditure forecast’ – http://ec.europa.eu/health/healthcare/key_documents/index_en.htm). Methods A model was built to assess policy scenarios’ impact on the pharmaceutical budgets of seven member states of the EU, namely France, Germany, Greece, Hungary, Poland, Portugal, and the United Kingdom. The following scenarios were tested: expanding the UK policies to EU, changing time to market access, modifying generic price and penetration, shifting the distribution chain of biosimilars (retail/hospital). Results Applying the UK policy resulted in dramatic savings for Germany (10 times the base case forecast) and substantial additional savings for France and Portugal (2 and 4 times the base case forecast, respectively). Delaying time to market was found be to a very powerful tool to reduce pharmaceutical expenditure. Applying the EU transparency directive (6-month process for pricing and reimbursement) increased pharmaceutical expenditure for all countries (from 1.1 to 4 times the base case forecast), except in Germany (additional savings). Decreasing the price of generics and boosting the penetration rate, as well as shifting distribution of biosimilars through hospital chain were also key methods to reduce pharmaceutical expenditure. Change in the level of reimbursement rate to 100% in all countries led to an important increase in the pharmaceutical budget. Conclusions Forecasting pharmaceutical expenditure is a critical exercise to inform policy decision makers. The most important leverages identified by the model on pharmaceutical budget were driven by generic and biosimilar prices, penetration rate, and distribution. Reducing, even slightly, the prices of generics had a major impact on savings. However, very aggressive pricing of generic and biosimilar products might make this market unattractive and can be counterproductive. Worth noting, delaying time to access innovative products was also identified as an effective leverage to increase savings but might not be a desirable policy for breakthrough products. Increasing patient financial contributions, either directly or indirectly via their private insurances, is a more likely scenario rather than expanding the national pharmaceutical expenditure coverage. PMID:27226830

Baldrige Theory into Practice: A Generic Model

ERIC Educational Resources Information Center

Arif, Mohammed

2007-01-01

Purpose: The education system globally has moved from a push-based or producer-centric system to a pull-based or customer centric system. Malcolm Baldrige Quality Award (MBQA) model happens to be one of the latest additions to the pull based models. The purpose of this paper is to develop a generic framework for MBQA that can be used by…

Developing Social Competence and Other Generic Skills in Teacher Education: Applying the Model of Integrative Pedagogy

ERIC Educational Resources Information Center

Tynjälä, Päivi; Virtanen, Anne; Klemola, Ulla; Kostiainen, Emma; Rasku-Puttonen, Helena

2016-01-01

The purpose of the study was to examine how social competence and other generic skills can be developed in teacher education using a pedagogical model called Integrative Pedagogy. This model is based on the idea of integrating the four basic components of expertise: Theoretical knowledge, practical knowledge, self-regulative knowledge, and…

Examining the role of Coulomb static stress transfer in injection-induced seismicity: a generic modeling approach

NASA Astrophysics Data System (ADS)

Brown, M. R. M.; Ge, S.

2017-12-01

Increased pore pressure decreasing the effective stress on a critically stressed fault has been the accepted mechanism for injection-induced seismicity. This, however, is an over simplified approach that does not take into account the coupled hydro-mechanical effects. In addition, this approach leaves out a possible key stressor in the system, the earthquakes. Earthquakes are known to interact with each other by Coulomb static stress transfer, the process of permanent stress change caused by movement on a fault. In areas of induced seismicity, many small to moderate earthquakes can occur adding to the stress in the system via Coulomb static stress transfer. Here we ask: Is the Coulomb static stress transfer from the earthquakes as important as the pore pressure increase or stress changes caused by coupled hydro-mechanical processes? Is there a point where the Coulomb static stress transfer from the earthquakes becomes the controlling process for inducing future earthquakes? How does the effect of many small earthquakes compare to a few larger events in terms of Coulomb static stress transfer? In this study, we use hydrologic and coupled hydro-mechanical models and USGS Coulomb 3 to assess the importance of induced earthquakes in terms of the stress change in the system. Realistic scenarios of wastewater injection and earthquake magnitude-frequency distributions are used to develop generic models. Model variables and data are varied to evaluate the range of possible outcomes. Preliminary results show that the stress change associated with injection is of the same order of magnitude as the cumulative Coulomb static stress change of a series of small (1

78 FR 44931 - Agency Information Collection Activities: Submission for OMB Review; Comment Request

Federal Register 2010, 2011, 2012, 2013, 2014

2013-07-25

... services. The tasks of developing new questions and improving upon existing complaint questions along with... of the generic clearance process. This generic clearance will allow the Bureau to test and pilot new...

Cost-effectiveness analysis of valsartan versus losartan and the effect of switching.

PubMed

Baker, Timothy M; Goh, Jowern; Johnston, Atholl; Falvey, Heather; Brede, Yvonne; Brown, Ruth E

2012-01-01

Losartan will shortly become generic, and this may encourage switching to the generic drug. However, valsartan was shown in a meta-analysis to be statistically superior in lowering blood pressure (BP) to losartan. This paper examines the costs of treatment with these two drugs and the potential consequences of switching established valsartan patients to generic losartan. A US payer cost-effectiveness model was developed incorporating the risk of cardiovascular disease (CVD) events related to systolic blood pressure (SBP) control comparing valsartan to continual losartan and switching from valsartan to generic losartan. The model, based upon a meta-analysis by Nixon et al. and Framingham equations, included first CVD event costs calculated from US administrative data sets and utility values from published sources. The modeled outcomes were number of CVD events, costs and incremental cost per quality-adjusted life-year (QALY) and life-year (LY). Fewer patients had fatal and non-fatal CVD events with valsartan therapy compared with continual losartan and with patients switched from valsartan to generic losartan. The base-case model results indicated that continued treatment with valsartan had an incremental cost-effectiveness ratio of $27,268 and $25,460 per life year gained, and $32,313 and $30,170 per QALY gained, relative to continual losartan and switching treatments, respectively. Sensitivity analyses found that patient discontinuation post-switching was a sensitive parameter. Including efficacy offsets with lowered adherence or discontinuation resulted in more favorable ratios for valsartan compared to switching therapy. The model does not evaluate post-primary CVD events and considers change in SBP from baseline level as the sole predictor of CVD risk. Valsartan appears to be cost-effective compared to switching to generic losartan and switching to the generic drug does not support a cost offset argument over the longer term. Physicians should continue to consider the needs of individual patient and not cost offsets.

Rocketdyne/Westinghouse nuclear thermal rocket engine modeling

NASA Technical Reports Server (NTRS)

Glass, James F.

1993-01-01

The topics are presented in viewgraph form and include the following: systems approach needed for nuclear thermal rocket (NTR) design optimization; generic NTR engine power balance codes; rocketdyne nuclear thermal system code; software capabilities; steady state model; NTR engine optimizer code-logic; reactor power calculation logic; sample multi-component configuration; NTR design code output; generic NTR code at Rocketdyne; Rocketdyne NTR model; and nuclear thermal rocket modeling directions.

Linking Goal-Oriented Requirements and Model-Driven Development

NASA Astrophysics Data System (ADS)

Pastor, Oscar; Giachetti, Giovanni

In the context of Goal-Oriented Requirement Engineering (GORE) there are interesting modeling approaches for the analysis of complex scenarios that are oriented to obtain and represent the relevant requirements for the development of software products. However, the way to use these GORE models in an automated Model-Driven Development (MDD) process is not clear, and, in general terms, the translation of these models into the final software products is still manually performed. Therefore, in this chapter, we show an approach to automatically link GORE models and MDD processes, which has been elaborated by considering the experience obtained from linking the i * framework with an industrially applied MDD approach. The linking approach proposed is formulated by means of a generic process that is based on current modeling standards and technologies in order to facilitate its application for different MDD and GORE approaches. Special attention is paid to how this process generates appropriate model transformation mechanisms to automatically obtain MDD conceptual models from GORE models, and how it can be used to specify validation mechanisms to assure the correct model transformations.

Using peer-assisted learning and role-playing to teach generic skills to dental students: the health care simulation model.

PubMed

El Tantawi, Maha M A; Abdelaziz, Hytham; AbdelRaheem, Amira S; Mahrous, Ahmed A

2014-01-01

Increasing importance is attached to teaching generic skills to undergraduate students in various disciplines. This article describes an extracurricular, student-led activity for teaching generic skills using the Model United Nations over three months. The activity used the Health Care Simulation Model (HCSM) with peer learning and role-playing to accomplish its objectives. An interview was used to select from undergraduate and postgraduate dental students at Alexandria University, Alexandria, Egypt, to develop a group of staff to act as peer teachers after receiving training (n=77). These peer teachers provided training for 123 undergraduate dental students to serve as delegates who acted as trainees or peer learners. At the end of the training sessions, a conference was held in which the students played the roles of delegates representing officials responsible for health care systems in ten countries. The students reported improvement in generic skills, enjoyed several aspects of the experience, and disliked other aspects of the model to a lesser extent. In multivariate analysis, perceived usefulness of the HCSM was significantly greater for staff than delegates and increased as self-reported improvement in knowledge of health care systems increased. This study suggests that innovative, student-centered educational methods can be effective for teaching generic skills and factual information.

Comparative Analysis on Nonlinear Models for Ron Gasoline Blending Using Neural Networks

NASA Astrophysics Data System (ADS)

Aguilera, R. Carreño; Yu, Wen; Rodríguez, J. C. Tovar; Mosqueda, M. Elena Acevedo; Ortiz, M. Patiño; Juarez, J. J. Medel; Bautista, D. Pacheco

The blending process always being a nonlinear process is difficult to modeling, since it may change significantly depending on the components and the process variables of each refinery. Different components can be blended depending on the existing stock, and the chemical characteristics of each component are changing dynamically, they all are blended until getting the expected specification in different properties required by the customer. One of the most relevant properties is the Octane, which is difficult to control in line (without the component storage). Since each refinery process is quite different, a generic gasoline blending model is not useful when a blending in line wants to be done in a specific process. A mathematical gasoline blending model is presented in this paper for a given process described in state space as a basic gasoline blending process description. The objective is to adjust the parameters allowing the blending gasoline model to describe a signal in its trajectory, representing in neural networks extreme learning machine method and also for nonlinear autoregressive-moving average (NARMA) in neural networks method, such that a comparative work be developed.

The formal verification of generic interpreters

NASA Technical Reports Server (NTRS)

Windley, P.; Levitt, K.; Cohen, G. C.

1991-01-01

The task assignment 3 of the design and validation of digital flight control systems suitable for fly-by-wire applications is studied. Task 3 is associated with formal verification of embedded systems. In particular, results are presented that provide a methodological approach to microprocessor verification. A hierarchical decomposition strategy for specifying microprocessors is also presented. A theory of generic interpreters is presented that can be used to model microprocessor behavior. The generic interpreter theory abstracts away the details of instruction functionality, leaving a general model of what an interpreter does.

Reconstruction of genome-scale human metabolic models using omics data.

PubMed

Ryu, Jae Yong; Kim, Hyun Uk; Lee, Sang Yup

2015-08-01

The impact of genome-scale human metabolic models on human systems biology and medical sciences is becoming greater, thanks to increasing volumes of model building platforms and publicly available omics data. The genome-scale human metabolic models started with Recon 1 in 2007, and have since been used to describe metabolic phenotypes of healthy and diseased human tissues and cells, and to predict therapeutic targets. Here we review recent trends in genome-scale human metabolic modeling, including various generic and tissue/cell type-specific human metabolic models developed to date, and methods, databases and platforms used to construct them. For generic human metabolic models, we pay attention to Recon 2 and HMR 2.0 with emphasis on data sources used to construct them. Draft and high-quality tissue/cell type-specific human metabolic models have been generated using these generic human metabolic models. Integration of tissue/cell type-specific omics data with the generic human metabolic models is the key step, and we discuss omics data and their integration methods to achieve this task. The initial version of the tissue/cell type-specific human metabolic models can further be computationally refined through gap filling, reaction directionality assignment and the subcellular localization of metabolic reactions. We review relevant tools for this model refinement procedure as well. Finally, we suggest the direction of further studies on reconstructing an improved human metabolic model.

Dilation and Hypertrophy: A Cell-Based Continuum Mechanics Approach Towards Ventricular Growth and Remodeling

NASA Astrophysics Data System (ADS)

Ulerich, J.; Göktepe, S.; Kuhl, E.

This manuscript presents a continuum approach towards cardiac growth and remodeling that is capable to predict chronic maladaptation of the heart in response to changes in mechanical loading. It is based on the multiplicative decomposition of the deformation gradient into and elastic and a growth part. Motivated by morphological changes in cardiomyocyte geometry, we introduce an anisotropic growth tensor that can capture both hypertrophic wall thickening and ventricular dilation within one generic concept. In agreement with clinical observations, we propose wall thickening to be a stress-driven phenomenon whereas dilation is introduced as a strain-driven process. The features of the proposed approach are illustrated in terms of the adaptation of thin heart slices and in terms overload-induced dilation in a generic bi-ventricular heart model.

Using Bayesian Networks to Improve Knowledge Assessment

ERIC Educational Resources Information Center

Millan, Eva; Descalco, Luis; Castillo, Gladys; Oliveira, Paula; Diogo, Sandra

2013-01-01

In this paper, we describe the integration and evaluation of an existing generic Bayesian student model (GBSM) into an existing computerized testing system within the Mathematics Education Project (PmatE--Projecto Matematica Ensino) of the University of Aveiro. This generic Bayesian student model had been previously evaluated with simulated…

Embedding Academic Literacy Skills: Towards a Best Practice Model

ERIC Educational Resources Information Center

McWilliams, Robyn; Allan, Quentin

2014-01-01

Learning advisors provide academic literacy development support in a variety of configurations, ranging from one-on-one consultations through to large-scale lectures. Such lectures can be generic, stand-alone modules or embedded within a discipline-specific course. Pragmatic and institutional considerations suggest that a generic model of delivery…

Experimental study of UTM-LST generic half model transport aircraft

NASA Astrophysics Data System (ADS)

Ujang, M. I.; Mat, S.; Perumal, K.; Mohd. Nasir, M. N.

2016-10-01

This paper presents the experimental results from the investigation carried out at the UTM Low Speed wind tunnel facility (UTM-LST) on a half model generic transport aircraft at several configurations of primary control surfaces (flap, aileron and elevator). The objective is to measure the aerodynamic forces and moments due to the configuration changes. The study is carried out at two different speeds of 26.1 m/s and 43.1 m/s at corresponding Reynolds number of 1 × 106 and 2 × 106, respectively. Angle of attack of the model is varied between -2o to 20o. For the flaps, the deflection applied is 0o, 5o and 10o. Meanwhile, for aileron and elevator, the deflection applied is between -10o and 10o. The results show the differences in aerodynamic characteristics of the aircraft at different control surfaces configurations. The results obtained indicate that a laminar separation bubble developed on the surface of the wing at lower angles of attack and show that the separation process is delayed when the Reynolds number is increased.

Model for macroevolutionary dynamics.

PubMed

Maruvka, Yosef E; Shnerb, Nadav M; Kessler, David A; Ricklefs, Robert E

2013-07-02

The highly skewed distribution of species among genera, although challenging to macroevolutionists, provides an opportunity to understand the dynamics of diversification, including species formation, extinction, and morphological evolution. Early models were based on either the work by Yule [Yule GU (1925) Philos Trans R Soc Lond B Biol Sci 213:21-87], which neglects extinction, or a simple birth-death (speciation-extinction) process. Here, we extend the more recent development of a generic, neutral speciation-extinction (of species)-origination (of genera; SEO) model for macroevolutionary dynamics of taxon diversification. Simulations show that deviations from the homogeneity assumptions in the model can be detected in species-per-genus distributions. The SEO model fits observed species-per-genus distributions well for class-to-kingdom-sized taxonomic groups. The model's predictions for the appearance times (the time of the first existing species) of the taxonomic groups also approximately match estimates based on molecular inference and fossil records. Unlike estimates based on analyses of phylogenetic reconstruction, fitted extinction rates for large clades are close to speciation rates, consistent with high rates of species turnover and the relatively slow change in diversity observed in the fossil record. Finally, the SEO model generally supports the consistency of generic boundaries based on morphological differences between species and provides a comparator for rates of lineage splitting and morphological evolution.

Partial automation of database processing of simulation outputs from L-systems models of plant morphogenesis.

PubMed

Chen, Yi- Ping Phoebe; Hanan, Jim

2002-01-01

Models of plant architecture allow us to explore how genotype environment interactions effect the development of plant phenotypes. Such models generate masses of data organised in complex hierarchies. This paper presents a generic system for creating and automatically populating a relational database from data generated by the widely used L-system approach to modelling plant morphogenesis. Techniques from compiler technology are applied to generate attributes (new fields) in the database, to simplify query development for the recursively-structured branching relationship. Use of biological terminology in an interactive query builder contributes towards making the system biologist-friendly.

Impact of medicare part D plan features on use of generic drugs.

PubMed

Tang, Yan; Gellad, Walid F; Men, Aiju; Donohue, Julie M

2014-06-01

Little is known about how Medicare Part D plan features influence choice of generic versus brand drugs. To examine the association between Part D plan features and generic medication use. Data from a 2009 random sample of 1.6 million fee-for-service, Part D enrollees aged 65 years and above, who were not dually eligible or receiving low-income subsidies, were used to examine the association between plan features (generic cost-sharing, difference in brand and generic copay, prior authorization, step therapy) and choice of generic antidepressants, antidiabetics, and statins. Logistic regression models accounting for plan-level clustering were adjusted for sociodemographic and health status. Generic cost-sharing ranged from $0 to $9 for antidepressants and statins, and from $0 to $8 for antidiabetics (across 5th-95th percentiles). Brand-generic cost-sharing differences were smallest for statins (5th-95th percentiles: $16-$37) and largest for antidepressants ($16-$64) across plans. Beneficiaries with higher generic cost-sharing had lower generic use [adjusted odds ratio (OR)=0.97, 95% confidence interval (CI), 0.95-0.98 for antidepressants; OR=0.97, 95% CI, 0.96-0.98 for antidiabetics; OR=0.94, 95% CI, 0.92-0.95 for statins]. Larger brand-generic cost-sharing differences and prior authorization were significantly associated with greater generic use in all categories. Plans could increase generic use by 5-12 percentage points by reducing generic cost-sharing from the 75th ($7) to 25th percentiles ($4-$5), increasing brand-generic cost-sharing differences from the 25th ($25-$26) to 75th ($32-$33) percentiles, and using prior authorization and step therapy. Cost-sharing features and utilization management tools were significantly associated with generic use in 3 commonly used medication categories.

A Generic Evaluation Model for Semantic Web Services

NASA Astrophysics Data System (ADS)

Shafiq, Omair

Semantic Web Services research has gained momentum over the last few Years and by now several realizations exist. They are being used in a number of industrial use-cases. Soon software developers will be expected to use this infrastructure to build their B2B applications requiring dynamic integration. However, there is still a lack of guidelines for the evaluation of tools developed to realize Semantic Web Services and applications built on top of them. In normal software engineering practice such guidelines can already be found for traditional component-based systems. Also some efforts are being made to build performance models for servicebased systems. Drawing on these related efforts in component-oriented and servicebased systems, we identified the need for a generic evaluation model for Semantic Web Services applicable to any realization. The generic evaluation model will help users and customers to orient their systems and solutions towards using Semantic Web Services. In this chapter, we have presented the requirements for the generic evaluation model for Semantic Web Services and further discussed the initial steps that we took to sketch such a model. Finally, we discuss related activities for evaluating semantic technologies.

Hydrothermal Gasification for Waste to Energy

NASA Astrophysics Data System (ADS)

Epps, Brenden; Laser, Mark; Choo, Yeunun

2014-11-01

Hydrothermal gasification is a promising technology for harvesting energy from waste streams. Applications range from straightforward waste-to-energy conversion (e.g. municipal waste processing, industrial waste processing), to water purification (e.g. oil spill cleanup, wastewater treatment), to biofuel energy systems (e.g. using algae as feedstock). Products of the gasification process are electricity, bottled syngas (H2 + CO), sequestered CO2, clean water, and inorganic solids; further chemical reactions can be used to create biofuels such as ethanol and biodiesel. We present a comparison of gasification system architectures, focusing on efficiency and economic performance metrics. Various system architectures are modeled computationally, using a model developed by the coauthors. The physical model tracks the mass of each chemical species, as well as energy conversions and transfers throughout the gasification process. The generic system model includes the feedstock, gasification reactor, heat recovery system, pressure reducing mechanical expanders, and electricity generation system. Sensitivity analysis of system performance to various process parameters is presented. A discussion of the key technological barriers and necessary innovations is also presented.

Performance degradation of a model helicopter rotor with a generic ice shape

NASA Technical Reports Server (NTRS)

Korkan, K. D.; Cross, E. J., Jr.; Miller, T. L.

1984-01-01

An experimental program using a commercially available remotely controlled model helicopter in the Texas A&M University (TAMU) subsonic wind tunnel has been conducted to investigate the performance degradation resulting from the simulated formation of ice on the leading edge of the main rotor blades in both hover and forward flight. The rotor blades utilized a NACA 0012 airfoil with a 2.5-in. constant chord. A generic ice shape derived from a predetermined natural ice condition was applied to the 53.375-in.-diameter main rotor, and thrust and torque coefficients were measured for the main rotor as functions of velocity, main rotor rpm, fuselage angle of incidence, collective pitch angle, and spanwise extent of icing. The model helicopter test exhibited significant performance degradation of the main rotor when generic ice was added. An increase of approximately 150 percent in torque coefficient to maintain a constant thrust coefficient was noted when generic ice had been applied to the 85 percent rotor radial location. Also, considerable additional degradation occurred when generic ice was applied to the 100 percent rotor radial location, as compared with the 85 percent simulated ice performance values, indicating the sensitivity of the rotor tip region.

Unraveling multiple changes in complex climate time series using Bayesian inference

NASA Astrophysics Data System (ADS)

Berner, Nadine; Trauth, Martin H.; Holschneider, Matthias

2016-04-01

Change points in time series are perceived as heterogeneities in the statistical or dynamical characteristics of observations. Unraveling such transitions yields essential information for the understanding of the observed system. The precise detection and basic characterization of underlying changes is therefore of particular importance in environmental sciences. We present a kernel-based Bayesian inference approach to investigate direct as well as indirect climate observations for multiple generic transition events. In order to develop a diagnostic approach designed to capture a variety of natural processes, the basic statistical features of central tendency and dispersion are used to locally approximate a complex time series by a generic transition model. A Bayesian inversion approach is developed to robustly infer on the location and the generic patterns of such a transition. To systematically investigate time series for multiple changes occurring at different temporal scales, the Bayesian inversion is extended to a kernel-based inference approach. By introducing basic kernel measures, the kernel inference results are composed into a proxy probability to a posterior distribution of multiple transitions. Thus, based on a generic transition model a probability expression is derived that is capable to indicate multiple changes within a complex time series. We discuss the method's performance by investigating direct and indirect climate observations. The approach is applied to environmental time series (about 100 a), from the weather station in Tuscaloosa, Alabama, and confirms documented instrumentation changes. Moreover, the approach is used to investigate a set of complex terrigenous dust records from the ODP sites 659, 721/722 and 967 interpreted as climate indicators of the African region of the Plio-Pleistocene period (about 5 Ma). The detailed inference unravels multiple transitions underlying the indirect climate observations coinciding with established global climate events.

Computational models of music perception and cognition I: The perceptual and cognitive processing chain

NASA Astrophysics Data System (ADS)

Purwins, Hendrik; Herrera, Perfecto; Grachten, Maarten; Hazan, Amaury; Marxer, Ricard; Serra, Xavier

2008-09-01

We present a review on perception and cognition models designed for or applicable to music. An emphasis is put on computational implementations. We include findings from different disciplines: neuroscience, psychology, cognitive science, artificial intelligence, and musicology. The article summarizes the methodology that these disciplines use to approach the phenomena of music understanding, the localization of musical processes in the brain, and the flow of cognitive operations involved in turning physical signals into musical symbols, going from the transducers to the memory systems of the brain. We discuss formal models developed to emulate, explain and predict phenomena involved in early auditory processing, pitch processing, grouping, source separation, and music structure computation. We cover generic computational architectures of attention, memory, and expectation that can be instantiated and tuned to deal with specific musical phenomena. Criteria for the evaluation of such models are presented and discussed. Thereby, we lay out the general framework that provides the basis for the discussion of domain-specific music models in Part II.

What Is the Future of Generics in Transplantation?

PubMed

van Gelder, Teun

2015-11-01

Generic immunosuppressive drugs are available in Europe, Canada, and the United States. Between countries, there are large differences in the market penetration of generic drugs in general, and for immunosuppressive drugs in particular. The registration criteria for generic immunosuppressive drugs are often criticized. However, it is unlikely that the criteria for registration of narrow therapeutic index drugs are going to change, and bioequivalence studies, performed in healthy volunteers, will remain the backbone of the registration process. It would be good if the registration authorities would demand that all generic variants of an innovator drug have the same pill appearance to reduce errors and promote drug adherence.To allow for safe substitution, a number of criteria need to be fulfilled. Generic substitution should not be taken out of the hands of the treating physicians. Generic substitution can only be done safely if initiated by the prescriber, and in well-informed and prepared patients. Payers should refrain from forcing pharmacists to dispense generic drugs in patients on maintenance treatment with innovator drug. Instead, together with transplant societies, they should design guidelines on how to implement generic immunosuppressive drugs into clinical practice. Substitutions must be followed by control visits to check if the patient is taking the medication correctly and if drug exposure remains stable. Inadvertent, uncontrolled substitutions from 1 generic to another, initiated outside the scope of the prescriber, must be avoided as they are unsafe. Repetitive subsequent generic substitutions result in minimal additional cost savings and have an inherent risk of medication errors.

Generic experimental design for product strategy evaluation : crumb rubber modified materials.

DOT National Transportation Integrated Search

2005-02-01

This report presents the framework for a generic process to evaluate new products and/or strategies for possible use within Caltrans. The framework is the result of a collaborative effort among Caltrans, the University of California Partnered Pavemen...

Generic Competencies in the Education of Engineers: The Case of Engineering Program in a Public University in Mexico

ERIC Educational Resources Information Center

Serna, Alejandra García; Vega, José Luis Arcos; García, Juan José Sevilla; Ruiz, María Amparo Oliveros

2018-01-01

We present an analysis regarding generic skills on engineering program offered in a public state university in Mexico (UABC). The university implemented a new educational model changing rigid programs to flexible programs based on competencies. The goal is to determine generic skills related to the four pillars of learning: learning to do,…

The Context, Process, and Outcome Evaluation Model for Organisational Health Interventions

PubMed Central

Fridrich, Annemarie; Jenny, Gregor J.; Bauer, Georg F.

2015-01-01

To facilitate evaluation of complex, organisational health interventions (OHIs), this paper aims at developing a context, process, and outcome (CPO) evaluation model. It builds on previous model developments in the field and advances them by clearly defining and relating generic evaluation categories for OHIs. Context is defined as the underlying frame that influences and is influenced by an OHI. It is further differentiated into the omnibus and discrete contexts. Process is differentiated into the implementation process, as the time-limited enactment of the original intervention plan, and the change process of individual and collective dynamics triggered by the implementation process. These processes lead to proximate, intermediate, and distal outcomes, as all results of the change process that are meaningful for various stakeholders. Research questions that might guide the evaluation of an OHI according to the CPO categories and a list of concrete themes/indicators and methods/sources applied within the evaluation of an OHI project at a hospital in Switzerland illustrate the model's applicability in structuring evaluations of complex OHIs. In conclusion, the model supplies a common language and a shared mental model for improving communication between researchers and company members and will improve the comparability and aggregation of evaluation study results. PMID:26557665

The Context, Process, and Outcome Evaluation Model for Organisational Health Interventions.

PubMed

Fridrich, Annemarie; Jenny, Gregor J; Bauer, Georg F

2015-01-01

To facilitate evaluation of complex, organisational health interventions (OHIs), this paper aims at developing a context, process, and outcome (CPO) evaluation model. It builds on previous model developments in the field and advances them by clearly defining and relating generic evaluation categories for OHIs. Context is defined as the underlying frame that influences and is influenced by an OHI. It is further differentiated into the omnibus and discrete contexts. Process is differentiated into the implementation process, as the time-limited enactment of the original intervention plan, and the change process of individual and collective dynamics triggered by the implementation process. These processes lead to proximate, intermediate, and distal outcomes, as all results of the change process that are meaningful for various stakeholders. Research questions that might guide the evaluation of an OHI according to the CPO categories and a list of concrete themes/indicators and methods/sources applied within the evaluation of an OHI project at a hospital in Switzerland illustrate the model's applicability in structuring evaluations of complex OHIs. In conclusion, the model supplies a common language and a shared mental model for improving communication between researchers and company members and will improve the comparability and aggregation of evaluation study results.

Bridging generic and professional care practices for Muslim patients through use of Leininger's culture care modes.

PubMed

Wehbe-Alamah, Hiba

2008-04-01

The purpose of this article is to provide knowledge of traditional Muslim generic (folk) care beliefs, expressions and practices derived from research and descriptive sources, in order to assist nurses and other health care professionals to integrate generic (folk) into professional care practices. Muslim generic (folk) care beliefs and practices related to the caregiving process, health, illness, dietary needs, dress, privacy, modesty, touch, gender relations, eye contact, abortion, contraception, birth, death and bereavement were explored. A discussion involving the use of Leininger's culture care preservation and/or maintenance, culture care accommodation and/or negotiation and culture care repatterning and/or restructuring action modes to bridge the gap between generic (folk) and professional (etic) care practices and to consequently promote culturally congruent care is presented.

Transcriptional dynamics with time-dependent reaction rates

NASA Astrophysics Data System (ADS)

Nandi, Shubhendu; Ghosh, Anandamohan

2015-02-01

Transcription is the first step in the process of gene regulation that controls cell response to varying environmental conditions. Transcription is a stochastic process, involving synthesis and degradation of mRNAs, that can be modeled as a birth-death process. We consider a generic stochastic model, where the fluctuating environment is encoded in the time-dependent reaction rates. We obtain an exact analytical expression for the mRNA probability distribution and are able to analyze the response for arbitrary time-dependent protocols. Our analytical results and stochastic simulations confirm that the transcriptional machinery primarily act as a low-pass filter. We also show that depending on the system parameters, the mRNA levels in a cell population can show synchronous/asynchronous fluctuations and can deviate from Poisson statistics.

A comparative study of family-specific protein-ligand complex affinity prediction based on random forest approach

NASA Astrophysics Data System (ADS)

Wang, Yu; Guo, Yanzhi; Kuang, Qifan; Pu, Xuemei; Ji, Yue; Zhang, Zhihang; Li, Menglong

2015-04-01

The assessment of binding affinity between ligands and the target proteins plays an essential role in drug discovery and design process. As an alternative to widely used scoring approaches, machine learning methods have also been proposed for fast prediction of the binding affinity with promising results, but most of them were developed as all-purpose models despite of the specific functions of different protein families, since proteins from different function families always have different structures and physicochemical features. In this study, we proposed a random forest method to predict the protein-ligand binding affinity based on a comprehensive feature set covering protein sequence, binding pocket, ligand structure and intermolecular interaction. Feature processing and compression was respectively implemented for different protein family datasets, which indicates that different features contribute to different models, so individual representation for each protein family is necessary. Three family-specific models were constructed for three important protein target families of HIV-1 protease, trypsin and carbonic anhydrase respectively. As a comparison, two generic models including diverse protein families were also built. The evaluation results show that models on family-specific datasets have the superior performance to those on the generic datasets and the Pearson and Spearman correlation coefficients ( R p and Rs) on the test sets are 0.740, 0.874, 0.735 and 0.697, 0.853, 0.723 for HIV-1 protease, trypsin and carbonic anhydrase respectively. Comparisons with the other methods further demonstrate that individual representation and model construction for each protein family is a more reasonable way in predicting the affinity of one particular protein family.

A functional-dynamic reflection on participatory processes in modeling projects.

PubMed

Seidl, Roman

2015-12-01

The participation of nonscientists in modeling projects/studies is increasingly employed to fulfill different functions. However, it is not well investigated if and how explicitly these functions and the dynamics of a participatory process are reflected by modeling projects in particular. In this review study, I explore participatory modeling projects from a functional-dynamic process perspective. The main differences among projects relate to the functions of participation-most often, more than one per project can be identified, along with the degree of explicit reflection (i.e., awareness and anticipation) on the dynamic process perspective. Moreover, two main approaches are revealed: participatory modeling covering diverse approaches and companion modeling. It becomes apparent that the degree of reflection on the participatory process itself is not always explicit and perfectly visible in the descriptions of the modeling projects. Thus, the use of common protocols or templates is discussed to facilitate project planning, as well as the publication of project results. A generic template may help, not in providing details of a project or model development, but in explicitly reflecting on the participatory process. It can serve to systematize the particular project's approach to stakeholder collaboration, and thus quality management.

Predictors of generic substitution: The role of psychological, sociodemographic, and contextual factors.

PubMed

Drozdowska, Aleksandra; Hermanowski, Tomasz

2016-01-01

Escalating pharmaceutical costs have become a global challenge for both governments and patients. Generic substitution is one way of decreasing these costs. The aim of this study was to investigate factors associated with patients' choice between generic drugs and innovator drugs. The survey was conducted in June 2013, 1000 people from across Poland were chosen as a representative population sample. The outcome (a preference for generics/a preference for innovator pharmaceuticals/no preference) was modeled by multinomial logistic regression, adjusted for several variables describing patients' sensitivity to selected generic features (price, brand, and country of origin), to third-party opinions about generics (information on generics in the mass media, opinions of health professionals (i.e. physicians, pharmacists), relatives/friends), as well as patients' personal experiences and income per household. The results supported the predictive capacity of most independent variables (except for patient sensitivity to the country of origin and to the information on generics in the mass media), denoting patients' preferences toward generic substitution. Patient sensitivity to recommendations by physicians, generic brand, and household income were the strongest predictors of the choice between generic and innovator pharmaceuticals (P < 0.001). The probability of choosing generics over innovator drugs was significantly higher among respondents with the lowest income levels, in those who were indifferent to generic brand or their physician's opinion, as well as in respondents who were sensitive to recommendations by pharmacists or attached a greater value to a past experience with generics (their own experience or that of relatives/friends). In consideration of the foregoing, awareness-raising campaigns may be recommended, supported by a variety of systemic solutions and tools to encourage generic substitution. Copyright © 2016 Elsevier Inc. All rights reserved.

Comparison of Standard Wind Turbine Models with Vendor Models for Power System Stability Analysis: Preprint

DOE Office of Scientific and Technical Information (OSTI.GOV)

Honrubia-Escribano, A.; Gomez Lazaro, E.; Jimenez-Buendia, F.

The International Electrotechnical Commission Standard 61400-27-1 was published in February 2015. This standard deals with the development of generic terms and parameters to specify the electrical characteristics of wind turbines. Generic models of very complex technological systems, such as wind turbines, are thus defined based on the four common configurations available in the market. Due to its recent publication, the comparison of the response of generic models with specific vendor models plays a key role in ensuring the widespread use of this standard. This paper compares the response of a specific Gamesa dynamic wind turbine model to the corresponding genericmore » IEC Type III wind turbine model response when the wind turbine is subjected to a three-phase voltage dip. This Type III model represents the doubly-fed induction generator wind turbine, which is not only one of the most commonly sold and installed technologies in the current market but also a complex variable-speed operation implementation. In fact, active and reactive power transients are observed due to the voltage reduction. Special attention is given to the reactive power injection provided by the wind turbine models because it is a requirement of current grid codes. Further, the boundaries of the generic models associated with transient events that cannot be represented exactly are included in the paper.« less

Provider-Independent Use of the Cloud

NASA Astrophysics Data System (ADS)

Harmer, Terence; Wright, Peter; Cunningham, Christina; Perrott, Ron

Utility computing offers researchers and businesses the potential of significant cost-savings, making it possible for them to match the cost of their computing and storage to their demand for such resources. A utility compute provider enables the purchase of compute infrastructures on-demand; when a user requires computing resources a provider will provision a resource for them and charge them only for their period of use of that resource. There has been a significant growth in the number of cloud computing resource providers and each has a different resource usage model, application process and application programming interface (API)-developing generic multi-resource provider applications is thus difficult and time consuming. We have developed an abstraction layer that provides a single resource usage model, user authentication model and API for compute providers that enables cloud-provider neutral applications to be developed. In this paper we outline the issues in using external resource providers, give examples of using a number of the most popular cloud providers and provide examples of developing provider neutral applications. In addition, we discuss the development of the API to create a generic provisioning model based on a common architecture for cloud computing providers.

Generic magnetohydrodynamic model at the Community Coordinated Modeling Center

NASA Astrophysics Data System (ADS)

Honkonen, I. J.; Rastaetter, L.; Glocer, A.

2016-12-01

The Community Coordinated Modeling Center (CCMC) at NASA Goddard Space Flight Center is a multi-agency partnership to enable, support and perform research and development for next-generation space science and space weather models. CCMC currently hosts nearly 100 numerical models and a cornerstone of this activity is the Runs on Request (RoR) system which allows anyone to request a model run and analyse/visualize the results via a web browser. CCMC is also active in the education community by organizing student research contests, heliophysics summer schools, and space weather forecaster training for students, government and industry representatives. Recently a generic magnetohydrodynamic (MHD) model was added to the CCMC RoR system which allows the study of a variety of fluid and plasma phenomena in one, two and three dimensions using a dynamic point-and-click web interface. For example students can experiment with the physics of fundamental wave modes of hydrodynamic and MHD theory, behavior of discontinuities and shocks as well as instabilities such as Kelvin-Helmholtz.Students can also use the model to experiments with numerical effects of models, i.e. how the process of discretizing a system of equations and solving them on a computer changes the solution. This can provide valuable background understanding e.g. for space weather forecasters on the effects of model resolution, numerical resistivity, etc. on the prediction.

Does the market share of generic medicines influence the price level?: a European analysis.

PubMed

Dylst, Pieter; Simoens, Steven

2011-10-01

After the expiry of patents for originator medicines, generic medicines can enter the market, and price competition may occur. This process generates savings to the healthcare payer and to patients, but knowledge about the factors affecting price competition in the pharmaceutical market following patent expiry is still limited. This study aimed to investigate the relationship between the market share of generic medicines and the change of the medicine price level in European off-patent markets. Data on medicine volumes and values for 35 active substances were purchased from IMS Health. Ex-manufacturer prices were used, and the analysis was limited to medicines in immediate-release, oral, solid dosage forms. Countries included were Austria, Belgium, Denmark, Germany, France, Italy, the Netherlands, Spain, Sweden and the UK, which constitute a mix of countries with low and high generic medicines market shares. Data were available from June 2002 until March 2007. Market volume has risen in both high and low generic market share countries (+29.27% and +27.40%, respectively), but the cause of the rise is different for the two markets. In low generic market share countries, the rise was caused by the increased use of generic medicines, while in high market share countries, the rise was driven by the increased use of generic medicines and a shift of use from originator to generic medicines. Market value was substantially decreased in high generic market share countries (-26.6%), while the decrease in low generic market share countries was limited (-0.06%). In high generic market share countries, medicine prices dropped by -43.18% versus -21.56% in low market share countries. The extent to which price competition from generic medicines leads to price reductions appears to vary according to the market share of generic medicines. High generic market share countries have seen a larger decrease in medicine prices than low market share countries.

Simulating the spread of malaria using a generic transmission model for mosquito-borne infectious diseases

NASA Astrophysics Data System (ADS)

Kon, Cynthia Mui Lian; Labadin, Jane

2016-06-01

Malaria is a critical infection caused by parasites which are spread to humans through mosquito bites. Approximately half of the world's population is in peril of getting infected by malaria. Mosquito-borne diseases have a standard behavior where they are transmitted in the same manner, only through vector mosquito. Taking this into account, a generic spatial-temporal model for transmission of multiple mosquito-borne diseases had been formulated. Our interest is to reproduce the actual cases of different mosquito-borne diseases using the generic model and then predict future cases so as to improve control and target measures competently. In this paper, we utilize notified weekly malaria cases in four districts in Sarawak, Malaysia, namely Kapit, Song, Belaga and Marudi. The actual cases for 36 weeks, which is from week 39 in 2012 to week 22 in 2013, are compared with simulations of the generic spatial-temporal transmission mosquito-borne diseases model. We observe that the simulation results display corresponding result to the actual malaria cases in the four districts.

Generic substitution: micro evidence from register data in Norway.

PubMed

Dalen, Dag Morten; Furu, Kari; Locatelli, Marilena; Strøm, Steinar

2011-02-01

The importance of prices, doctor and patient characteristics, and market institutions for the likelihood of choosing generic drugs instead of the more expensive original brand-name version are examined. Using an extensive dataset extracted from The Norwegian Prescription Database containing all prescriptions dispensed to individuals in February 2004 and 2006 on 23 different drugs (chemical substances) in Norway, we find strong evidence for the importance of both doctor and patient characteristics for the choice probabilities. The price difference between brand and generic versions and insurance coverage both affect generic substitution. Moreover, controlling for the retail chain affiliation of the dispensing pharmacy, we find that pharmacies play an important role in promoting generic substitution. In markets with more recent entry of generic drugs, brand-name loyalty proves to be much stronger, giving less explanatory power to our demand model.

Comparison of Generic-to-Brand Switchback Rates Between Generic and Authorized Generic Drugs.

PubMed

Hansen, Richard A; Qian, Jingjing; Berg, Richard; Linneman, James; Seoane-Vazquez, Enrique; Dutcher, Sarah K; Raofi, Saeid; Page, C David; Peissig, Peggy

2017-04-01

Generic drugs contain identical active ingredients as their corresponding brand drugs and are pharmaceutically equivalent and bioequivalent, whereas authorized generic drugs (AGs) contain both identical active and inactive ingredients as their corresponding brand drugs but are marketed as generics. This study compares generic-to-brand switchback rates between generic and AGs. Retrospective cohort study. Claims and electronic health record data from a regional U.S. health care system. The full cohort consisted of 5542 unique patients who received select branded drugs during the 6 months prior to their generic drug market availability (between 1999 and 2014) and then were switched to an AG or generic drug within 30 months of generic drug entry. For these patients, 5929 unique patient-drug combinations (867 with AGs and 5062 with generic drugs) were evaluated. Ten drugs with AGs and generics marketed between 1999 and 2014 were evaluated. The date of the first generic prescription was considered the index date for each drug, and it marked the beginning of follow-up to evaluate the occurrence of generic-to-brand switchback patterns over the subsequent 30 months. Switchback rates were compared between patients receiving AGs versus those receiving generics using multivariable Cox proportional hazards models, controlling for individual drug effects, age, sex, Charlson Comorbidity Score, pre-index drug use characteristics, and pre-index health care utilization. Among the 5542 unique patients who switched from brand to generic or brand to AG, 264 (4.8%) switched back to the brand drug. Overall switchback rates were similar for AGs compared with generics (hazard ratio [HR] 0.86, 95% confidence interval [CI] 0.65-1.15). The likelihood of switchback was higher for alendronate (HR 1.64, 95% CI 1.20-2.23) and simvastatin (HR 1.81, 95% CI 1.30-2.54) and lower for amlodipine (HR 0.27, 95% CI 0.17-0.42) compared with the other drugs evaluated. Overall switchback rates were similar between AG and generic drug users, indirectly supporting similar efficacy and tolerability profiles for brand and generic drugs. Reasons for differences in switchback rates among specific products need to be explored further. © 2017 Pharmacotherapy Publications, Inc.

Development and validation of a tool to assess knowledge and attitudes towards generic medicines among students in Greece: The ATtitude TOwards GENerics (ATTOGEN) questionnaire.

PubMed

Domeyer, Philip J; Aletras, Vassilis; Anagnostopoulos, Fotios; Katsari, Vasiliki; Niakas, Dimitris

2017-01-01

The use of generic medicines is a cost-effective policy, often dictated by fiscal restraints. To our knowledge, no fully validated tool exploring the students' knowledge and attitudes towards generic medicines exists. The aim of our study was to develop and validate a questionnaire exploring the knowledge and attitudes of M.Sc. in Health Care Management students and recent alumni's towards generic drugs in Greece. The development of the questionnaire was a result of literature review and pilot-testing of its preliminary versions to researchers and students. The final version of the questionnaire contains 18 items measuring the respondents' knowledge and attitude towards generic medicines on a 5-point Likert scale. Given the ordinal nature of the data, ordinal alpha and polychoric correlations were computed. The sample was randomly split into two halves. Exploratory factor analysis, performed in the first sample, was used for the creation of multi-item scales. Confirmatory factor analysis and Generalized Linear Latent and Mixed Model analysis (GLLAMM) with the use of the rating scale model were used in the second sample to assess goodness of fit. An assessment of internal consistency reliability, test-retest reliability, and construct validity was also performed. Among 1402 persons contacted, 986 persons completed our questionnaire (response rate = 70.3%). Overall Cronbach's alpha was 0.871. The conjoint use of exploratory and confirmatory factor analysis resulted in a six-scale model, which seemed to fit the data well. Five of the six scales, namely trust, drug quality, state audit, fiscal impact and drug substitution were found to be valid and reliable, while the knowledge scale suffered only from low inter-scale correlations and a ceiling effect. However, the subsequent confirmatory factor and GLLAMM analyses indicated a good fit of the model to the data. The ATTOGEN instrument proved to be a reliable and valid tool, suitable for assessing students' knowledge and attitudes towards generic medicines.

Industrial Adoption of Model-Based Systems Engineering: Challenges and Strategies

NASA Astrophysics Data System (ADS)

Maheshwari, Apoorv

As design teams are becoming more globally integrated, one of the biggest challenges is to efficiently communicate across the team. The increasing complexity and multi-disciplinary nature of the products are also making it difficult to keep track of all the information generated during the design process by these global team members. System engineers have identified Model-based Systems Engineering (MBSE) as a possible solution where the emphasis is placed on the application of visual modeling methods and best practices to systems engineering (SE) activities right from the beginning of the conceptual design phases through to the end of the product lifecycle. Despite several advantages, there are multiple challenges restricting the adoption of MBSE by industry. We mainly consider the following two challenges: a) Industry perceives MBSE just as a diagramming tool and does not see too much value in MBSE; b) Industrial adopters are skeptical if the products developed using MBSE approach will be accepted by the regulatory bodies. To provide counter evidence to the former challenge, we developed a generic framework for translation from an MBSE tool (Systems Modeling Language, SysML) to an analysis tool (Agent-Based Modeling, ABM). The translation is demonstrated using a simplified air traffic management problem and provides an example of a potential quite significant value: the ability to use MBSE representations directly in an analysis setting. For the latter challenge, we are developing a reference model that uses SysML to represent a generic infusion pump and SE process for planning, developing, and obtaining regulatory approval of a medical device. This reference model demonstrates how regulatory requirements can be captured effectively through model-based representations. We will present another case study at the end where we will apply the knowledge gained from both case studies to a UAV design problem.

Requirements analysis notebook for the flight data systems definition in the Real-Time Systems Engineering Laboratory (RSEL)

NASA Astrophysics Data System (ADS)

Wray, Richard B.

1991-12-01

A hybrid requirements analysis methodology was developed, based on the practices actually used in developing a Space Generic Open Avionics Architecture. During the development of this avionics architecture, a method of analysis able to effectively define the requirements for this space avionics architecture was developed. In this methodology, external interfaces and relationships are defined, a static analysis resulting in a static avionics model was developed, operating concepts for simulating the requirements were put together, and a dynamic analysis of the execution needs for the dynamic model operation was planned. The systems engineering approach was used to perform a top down modified structured analysis of a generic space avionics system and to convert actual program results into generic requirements. CASE tools were used to model the analyzed system and automatically generate specifications describing the model's requirements. Lessons learned in the use of CASE tools, the architecture, and the design of the Space Generic Avionics model were established, and a methodology notebook was prepared for NASA. The weaknesses of standard real-time methodologies for practicing systems engineering, such as Structured Analysis and Object Oriented Analysis, were identified.

Requirements analysis notebook for the flight data systems definition in the Real-Time Systems Engineering Laboratory (RSEL)

NASA Technical Reports Server (NTRS)

Wray, Richard B.

1991-01-01

A hybrid requirements analysis methodology was developed, based on the practices actually used in developing a Space Generic Open Avionics Architecture. During the development of this avionics architecture, a method of analysis able to effectively define the requirements for this space avionics architecture was developed. In this methodology, external interfaces and relationships are defined, a static analysis resulting in a static avionics model was developed, operating concepts for simulating the requirements were put together, and a dynamic analysis of the execution needs for the dynamic model operation was planned. The systems engineering approach was used to perform a top down modified structured analysis of a generic space avionics system and to convert actual program results into generic requirements. CASE tools were used to model the analyzed system and automatically generate specifications describing the model's requirements. Lessons learned in the use of CASE tools, the architecture, and the design of the Space Generic Avionics model were established, and a methodology notebook was prepared for NASA. The weaknesses of standard real-time methodologies for practicing systems engineering, such as Structured Analysis and Object Oriented Analysis, were identified.

Mammalian cell culture process for monoclonal antibody production: nonlinear modelling and parameter estimation.

PubMed

Selişteanu, Dan; Șendrescu, Dorin; Georgeanu, Vlad; Roman, Monica

2015-01-01

Monoclonal antibodies (mAbs) are at present one of the fastest growing products of pharmaceutical industry, with widespread applications in biochemistry, biology, and medicine. The operation of mAbs production processes is predominantly based on empirical knowledge, the improvements being achieved by using trial-and-error experiments and precedent practices. The nonlinearity of these processes and the absence of suitable instrumentation require an enhanced modelling effort and modern kinetic parameter estimation strategies. The present work is dedicated to nonlinear dynamic modelling and parameter estimation for a mammalian cell culture process used for mAb production. By using a dynamical model of such kind of processes, an optimization-based technique for estimation of kinetic parameters in the model of mammalian cell culture process is developed. The estimation is achieved as a result of minimizing an error function by a particle swarm optimization (PSO) algorithm. The proposed estimation approach is analyzed in this work by using a particular model of mammalian cell culture, as a case study, but is generic for this class of bioprocesses. The presented case study shows that the proposed parameter estimation technique provides a more accurate simulation of the experimentally observed process behaviour than reported in previous studies.

Mammalian Cell Culture Process for Monoclonal Antibody Production: Nonlinear Modelling and Parameter Estimation

PubMed Central

Selişteanu, Dan; Șendrescu, Dorin; Georgeanu, Vlad

2015-01-01

Monoclonal antibodies (mAbs) are at present one of the fastest growing products of pharmaceutical industry, with widespread applications in biochemistry, biology, and medicine. The operation of mAbs production processes is predominantly based on empirical knowledge, the improvements being achieved by using trial-and-error experiments and precedent practices. The nonlinearity of these processes and the absence of suitable instrumentation require an enhanced modelling effort and modern kinetic parameter estimation strategies. The present work is dedicated to nonlinear dynamic modelling and parameter estimation for a mammalian cell culture process used for mAb production. By using a dynamical model of such kind of processes, an optimization-based technique for estimation of kinetic parameters in the model of mammalian cell culture process is developed. The estimation is achieved as a result of minimizing an error function by a particle swarm optimization (PSO) algorithm. The proposed estimation approach is analyzed in this work by using a particular model of mammalian cell culture, as a case study, but is generic for this class of bioprocesses. The presented case study shows that the proposed parameter estimation technique provides a more accurate simulation of the experimentally observed process behaviour than reported in previous studies. PMID:25685797

Factors influencing the preference for purchasing generic drugs in a Southern Brazilian city.

PubMed

Guttier, Marília Cruz; Silveira, Marysabel Pinto Telis; Luiza, Vera Lucia; Bertoldi, Andréa Dâmaso

2017-06-26

The objective of this study is to identify factors associated with the preference for purchasing generic drugs in a medium-sized municipality in Southern Brazil. We have analyzed data from a population-based cross-sectional study conducted in 2012 with a sample of 2,856 adults (≥ 20 years old). The preference for purchasing generic drugs was the main outcome. The explanatory variables were the demographic and socioeconomic variables. Statistical analyses included Poisson regressions. The preference for purchasing generic drugs was 63.2% (95%CI 61.4-64.9). The variables correlated with this preference in the fully adjusted models were: male (prevalence ratio [PR] = 1.08; 95%CI 1.03-1.14), age of 20-39 years (PR = 1.10; 95%CI 1.02-1.20), low socioeconomic status (PR = 1.15; 95%CI 1.03-1.28), and good knowledge about generic drugs (PR= 4.66; 95%CI 2.89-7.52). Among those who preferred to purchase generic drugs, 55.1% have reported accepting to replace the prescribed drug (if not a generic) with the equivalent generic drug. Another correlate of the preference for purchasing generic drugs was because individuals consider their quality equivalent to reference medicines (PR = 2.15; 95%CI 1.93-2.41). Knowledge about generic drugs was the main correlate of the preference for purchasing generic drugs. The greater the knowledge or positive perception about generic drugs, the greater is the preference to purchase them. Therefore, educational campaigns for healthcare professionals and consumers appear to be the best strategy for expanding the use of generic drugs in Brazil.

Probabilistic modeling of the fate of Listeria monocytogenes in diced bacon during the manufacturing process.

PubMed

Billoir, Elise; Denis, Jean-Baptiste; Cammeau, Natalie; Cornu, Marie; Zuliani, Veronique

2011-02-01

To assess the impact of the manufacturing process on the fate of Listeria monocytogenes, we built a generic probabilistic model intended to simulate the successive steps in the process. Contamination evolution was modeled in the appropriate units (breasts, dice, and then packaging units through the successive steps in the process). To calibrate the model, parameter values were estimated from industrial data, from the literature, and based on expert opinion. By means of simulations, the model was explored using a baseline calibration and alternative scenarios, in order to assess the impact of changes in the process and of accidental events. The results are reported as contamination distributions and as the probability that the product will be acceptable with regards to the European regulatory safety criterion. Our results are consistent with data provided by industrial partners and highlight that tumbling is a key step for the distribution of the contamination at the end of the process. Process chain models could provide an important added value for risk assessment models that basically consider only the outputs of the process in their risk mitigation strategies. Moreover, a model calibrated to correspond to a specific plant could be used to optimize surveillance. © 2010 Society for Risk Analysis.

GMODWeb: a web framework for the generic model organism database

PubMed Central

O'Connor, Brian D; Day, Allen; Cain, Scott; Arnaiz, Olivier; Sperling, Linda; Stein, Lincoln D

2008-01-01

The Generic Model Organism Database (GMOD) initiative provides species-agnostic data models and software tools for representing curated model organism data. Here we describe GMODWeb, a GMOD project designed to speed the development of model organism database (MOD) websites. Sites created with GMODWeb provide integration with other GMOD tools and allow users to browse and search through a variety of data types. GMODWeb was built using the open source Turnkey web framework and is available from . PMID:18570664

Generic worklist handler for workflow-enabled products

NASA Astrophysics Data System (ADS)

Schmidt, Joachim; Meetz, Kirsten; Wendler, Thomas

1999-07-01

Workflow management (WfM) is an emerging field of medical information technology. It appears as a promising key technology to model, optimize and automate processes, for the sake of improved efficiency, reduced costs and improved patient care. The Application of WfM concepts requires the standardization of architectures and interfaces. A component of central interest proposed in this report is a generic work list handler: A standardized interface between a workflow enactment service and application system. Application systems with embedded work list handlers will be called 'Workflow Enabled Application Systems'. In this paper we discus functional requirements of work list handlers, as well as their integration into workflow architectures and interfaces. To lay the foundation for this specification, basic workflow terminology, the fundamentals of workflow management and - later in the paper - the available standards as defined by the Workflow Management Coalition are briefly reviewed.

Equivalence and interchangeability of narrow therapeutic index drugs in organ transplantation

PubMed Central

Johnston, Atholl

2013-01-01

The calcineurin inhibitors (CNIs), ciclosporin and tacrolimus, are the mainstay of immunosuppression in solid organ transplantation. Generic formulations of these drugs are now available. With increasing pressure on healthcare budgets and the consequent need to match health expectations to available resources, substitution with a generic product appears an attractive option to reduce costs. Approval of generic products differs from innovator drugs, and narrow therapeutic index drugs (NTIs; including CNIs) bring their own particular considerations. With NTIs, small variations in drug exposure could result in reduced immunosuppression or drug toxicity with potentially adverse effects on patient outcomes. NTIs are subject to stricter regulatory approval versus many other generic drugs. However, different generic formulations may still not necessarily be therapeutically equivalent in individuals, raising the possibility of significant differences in exposure between products. Although regional recommendations vary, many guidelines emphasise the need for NTI drug substitution to be initiated by the transplant physician, thus ensuring careful therapeutic monitoring and reduced negative patient impact. The need for therapeutic monitoring during generic substitution has important implications for the overall costs of generic treatment as these costs have to be factored in to the potential savings made from using generic formulations. The reduced acquisition costs of generic products may not necessarily translate into lower overall healthcare costs. This article examines the issue of equivalence and interchangeability of NTI drugs used in organ transplantation, the implications of the approval process for generic drugs on treatment efficacy and safety, and the effective management of substitutions between products. PMID:24089632

Evaluating Site-Specific and Generic Spatial Models of Aboveground Forest Biomass Based on Landsat Time-Series and LiDAR Strip Samples in the Eastern USA

Treesearch

Ram Deo; Matthew Russell; Grant Domke; Hans-Erik Andersen; Warren Cohen; Christopher Woodall

2017-01-01

Large-area assessment of aboveground tree biomass (AGB) to inform regional or national forest monitoring programs can be efficiently carried out by combining remotely sensed data and field sample measurements through a generic statistical model, in contrast to site-specific models. We integrated forest inventory plot data with spatial predictors from Landsat time-...

Wave-Optics Analysis of Pupil Imaging

NASA Technical Reports Server (NTRS)

Dean, Bruce H.; Bos, Brent J.

2006-01-01

Pupil imaging performance is analyzed from the perspective of physical optics. A multi-plane diffraction model is constructed by propagating the scalar electromagnetic field, surface by surface, along the optical path comprising the pupil imaging optical system. Modeling results are compared with pupil images collected in the laboratory. The experimental setup, although generic for pupil imaging systems in general, has application to the James Webb Space Telescope (JWST) optical system characterization where the pupil images are used as a constraint to the wavefront sensing and control process. Practical design considerations follow from the diffraction modeling which are discussed in the context of the JWST Observatory.

A distributed Clips implementation: dClips

NASA Technical Reports Server (NTRS)

Li, Y. Philip

1993-01-01

A distributed version of the Clips language, dClips, was implemented on top of two existing generic distributed messaging systems to show that: (1) it is easy to create a coarse-grained parallel programming environment out of an existing language if a high level messaging system is used; and (2) the computing model of a parallel programming environment can be changed easily if we change the underlying messaging system. dClips processes were first connected with a simple master-slave model. A client-server model with intercommunicating agents was later implemented. The concept of service broker is being investigated.

Projected economic impact of clinical findings of generic entry of topiramate on G4 European countries.

PubMed

Paradis, Pierre Emmanuel; Latrémouille-Viau, Dominick; Moore, Yuliya; Mishagina, Natalia; Lafeuille, Marie-Hélène; Lefebvre, Patrick; Gaudig, Maren; Duh, Mei Sheng

2009-07-01

To explore the effects of generic substitution of the antiepileptic drug (AED) topiramate (Topamax) in Canada; to convert observed Canadian costs into the settings of France, Germany, Italy, and the United Kingdom (UK); and to forecast the economic impact of generic topiramate entry in these four European countries. Health claims from Régie de l'assurance maladie du Québec (RAMQ) plan (1/2006-9/2008) and IMS Health data (1998-2008) were used. Patients with epilepsy and > or = 2 topiramate dispensings were selected. An open-cohort design was used to classify observation into mutually-exclusive periods of branded versus generic use of topiramate. Canadian healthcare utilization and costs (2007 CAN$/person-year) were compared between periods using multivariate models. Annualized per-patient costs (2007 euro or 2007 pound sterling/person-year) were converted using Canadian utilization rates, European prices and service-use ratios. Non-parametric bootstrap served to assess statistical significance of cost differences. Topiramate market was forecasted following generic entry (09/2009-09/2010) using autoregressive models based on the European experience. The economic impact of generic topiramate entry was estimated for each country. A total of 1164 patients (mean age: 39.8 years, 61.7% female) were observed for 2.6 years on average. After covariates adjustment, generic-use periods were associated with increased pharmacy dispensings (other AEDs: +0.95/person-year, non-AEDs: +12.28/person-year, p < 0.001), hospitalizations ( + 0.08/person-year, p = 0.015), and lengths of hospital stays (+0.51 days/person-year, p < 0.001). Adjusted costs, excluding topiramate, were CAN$1060/person-year higher during generic use (p = 0.005). Converted per-patient costs excluding topiramate were significantly higher for generic relative to brand periods in all European countries (adjusted cost differences per person-year: 706-815 euro, p < 0.001 for all comparisons). System-wide costs would increase from 3.5 to 24.4% one year after generic entry. Study limitations include the absence of indirect costs, possible claim inaccuracies, and IMS data limitations. Higher health costs were projected for G4 European countries from the Canadian experience following the generic entry of topiramate.

Stakeholder participation in health impact assessment: A multicultural approach

DOE Office of Scientific and Technical Information (OSTI.GOV)

Negev, Maya, E-mail: mayane@tau.ac.il; Davidovitch, Nadav, E-mail: nadavd@bgu.ac.il; Garb, Yaakov, E-mail: ygarb@bgu.ac.il

2013-11-15

The literature on impact assessment (HIA) registers the importance of stakeholder participation in the assessment process, but still lacks a model for engaging stakeholders of diverse ethnic, professional and sectorial backgrounds. This paper suggests that the multicultural approach can contribute to HIA through a revision of the generic 5-step HIA model, and its implementation in a metropolitan plan in Southern Israel. The health issue scoped by the stakeholders in the HIA is related to land uses in the vicinity of the national hazardous industry and hazardous waste site. The stakeholders were representatives of the diverse populations at stake, including ruralmore » Bedouins and Jewish city dwellers, as well as representatives from the public sector, private sector, non-governmental organizations and academia. The case study revealed that a multicultural stakeholder participation process helps to uncover health issues known to the community which were not addressed in the original plan, and provides local knowledge regarding health conditions that is especially valuable when scientific data is uncertain or absent. It enables diverse stakeholders to prioritize the health issues that will be assessed. The case study also reveals ways in which the model needs revisions and improvements such as in recruitment of diverse participants. This paper presents a multicultural model of HIA and discusses some of the challenges that are faced when HIA is implemented in the context of current decision-making culture. -- Highlights: • We revised the generic HIA model in light of the multicultural approach. • We tested the model in a case study of zoning a hazardous industry site. • Multicultural stakeholder participation uncovers health issues known to communities. • It enables community prioritization of health issues. • We present a model for multicultural stakeholder participation in HIA.« less

An Integrated Web-Based 3d Modeling and Visualization Platform to Support Sustainable Cities

NASA Astrophysics Data System (ADS)

Amirebrahimi, S.; Rajabifard, A.

2012-07-01

Sustainable Development is found as the key solution to preserve the sustainability of cities in oppose to ongoing population growth and its negative impacts. This is complex and requires a holistic and multidisciplinary decision making. Variety of stakeholders with different backgrounds also needs to be considered and involved. Numerous web-based modeling and visualization tools have been designed and developed to support this process. There have been some success stories; however, majority failed to bring a comprehensive platform to support different aspects of sustainable development. In this work, in the context of SDI and Land Administration, CSDILA Platform - a 3D visualization and modeling platform -was proposed which can be used to model and visualize different dimensions to facilitate the achievement of sustainability, in particular, in urban context. The methodology involved the design of a generic framework for development of an analytical and visualization tool over the web. CSDILA Platform was then implemented via number of technologies based on the guidelines provided by the framework. The platform has a modular structure and uses Service-Oriented Architecture (SOA). It is capable of managing spatial objects in a 4D data store and can flexibly incorporate a variety of developed models using the platform's API. Development scenarios can be modeled and tested using the analysis and modeling component in the platform and the results are visualized in seamless 3D environment. The platform was further tested using number of scenarios and showed promising results and potentials to serve a wider need. In this paper, the design process of the generic framework, the implementation of CSDILA Platform and technologies used, and also findings and future research directions will be presented and discussed.

Client/server approach to image capturing

NASA Astrophysics Data System (ADS)

Tuijn, Chris; Stokes, Earle

1998-01-01

The diversity of the digital image capturing devices on the market today is quite astonishing and ranges from low-cost CCD scanners to digital cameras (for both action and stand-still scenes), mid-end CCD scanners for desktop publishing and pre- press applications and high-end CCD flatbed scanners and drum- scanners with photo multiplier technology. Each device and market segment has its own specific needs which explains the diversity of the associated scanner applications. What all those applications have in common is the need to communicate with a particular device to import the digital images; after the import, additional image processing might be needed as well as color management operations. Although the specific requirements for all of these applications might differ considerably, a number of image capturing and color management facilities as well as other services are needed which can be shared. In this paper, we propose a client/server architecture for scanning and image editing applications which can be used as a common component for all these applications. One of the principal components of the scan server is the input capturing module. The specification of the input jobs is based on a generic input device model. Through this model we make abstraction of the specific scanner parameters and define the scan job definitions by a number of absolute parameters. As a result, scan job definitions will be less dependent on a particular scanner and have a more universal meaning. In this context, we also elaborate on the interaction of the generic parameters and the color characterization (i.e., the ICC profile). Other topics that are covered are the scheduling and parallel processing capabilities of the server, the image processing facilities, the interaction with the ICC engine, the communication facilities (both in-memory and over the network) and the different client architectures (stand-alone applications, TWAIN servers, plug-ins, OLE or Apple-event driven applications). This paper is structured as follows. In the introduction, we further motive the need for a scan server-based architecture. In the second section, we give a brief architectural overview of the scan server and the other components it is connected to. The third chapter exposes the generic model for input devices as well as the image processing model; the fourth chapter reveals the different shapes the scanning applications (or modules) can have. In the last section, we briefly summarize the presented material and point out trends for future development.

[Evaluation of Gastric Mucosal Injury Model Animals of Rebamipide Formulation--Study of Therapeutic Equivalence].

PubMed

Abe, Noriaki; Funato, Hiroki; Hirata, Ayumu; Nakai, Megumi; Iizuka, Michiro; Shiraishi, Hisashi; Jobu, Kohei; Yagi, Yusuke; Kadota, Aki; Ogi, Kyoko; Yokota, Junko; Miyamura, Mitsuhiko

2016-01-01

The introduction of generic drugs is promoted from the perspective of medical economics. In this context, we need to understand not only the bioequivalence of generic drugs specified in "the Guidelines for Bioequivalence Studies of Generic Products", but also formulation properties to consider their effect on pharmacological therapy. We evaluated the pharmaceutical characteristics of rebamipide formulations, a brand-name drug and two generic drugs, and their clinical functionality by using rat models of gastric mucosal injury induced by non-steroidal anti-inflammatory drugs (NSAIDs). Pharmaceutical evaluation showed significant differences in hardness. The inter-lot variation was small in all rebamipide formulations. In the clinical functionality study, biochemistry test values 7 d after the administration of rebamipide showed no differences among formulations. Higher levels of mucosal fluid secretion and antioxidative enzymes were observed in the groups administered rebamipide than in the control group. The levels of lipid peroxide were lower in the groups administered rebamipide than the control group. Multivariate analysis showed slight divergence between the brand-name and generic drugs. In future, it will be necessary to select generic drugs after careful consideration of bioequivalence, clinical functionality, and therapeutic equivalence by reviewing scientific evidence such as indication and formulation design, not to mention stable provision.

Estimating structural collapse fragility of generic building typologies using expert judgment

USGS Publications Warehouse

Jaiswal, Kishor; Wald, David J.; Perkins, David M.; Aspinall, Willy P.; Kiremidjian, Anne S.

2014-01-01

The structured expert elicitation process proposed by Cooke (1991), hereafter referred to as Cooke's approach, is applied for the first time in the realm of structural collapse-fragility assessment for selected generic construction types. Cooke's approach works on the principle of objective calibration scoring of judgments couple with hypothesis testing used in classical statistics. The performance-based scoring system reflects the combined measure of an expert's informativeness about variables in the problem are under consideration, and their ability to enumerate, in a statistically accurate way through expressing their true beliefs, the quantitative uncertainties associated with their assessments. We summarize the findings of an expert elicitation workshop in which a dozen earthquake-engineering professionals from around the world were engaged to estimate seismic collapse fragility for generic construction types. Development of seismic collapse fragility-functions was accomplished by combining their judgments using weights derived from Cooke's method. Although substantial effort was needed to elicit the inputs of these experts successfully, we anticipate that the elicitation strategy described here will gain momentum in a wide variety of earthquake seismology and engineering hazard and risk analyses where physical model and data limitations are inherent and objective professional judgment can fill gaps.

Estimating structural collapse fragility of generic building typologies using expert judgment

USGS Publications Warehouse

Jaiswal, Kishor S.; Wald, D.J.; Perkins, D.; Aspinall, W.P.; Kiremidjian, Anne S.; Deodatis, George; Ellingwood, Bruce R.; Frangopol, Dan M.

2014-01-01

The structured expert elicitation process proposed by Cooke (1991), hereafter referred to as Cooke’s approach, is applied for the first time in the realm of structural collapse-fragility assessment for selected generic construction types. Cooke’s approach works on the principle of objective calibration scoring of judgments coupled with hypothesis testing used in classical statistics. The performance-based scoring system reflects the combined measure of an expert’s informativeness about variables in the problem area under consideration, and their ability to enumerate, in a statistically accurate way through expressing their true beliefs, the quantitative uncertainties associated with their assessments. We summarize the findings of an expert elicitation workshop in which a dozen earthquake-engineering professionals from around the world were engaged to estimate seismic collapse fragility for generic construction types. Development of seismic collapse fragility functions was accomplished by combining their judgments using weights derived from Cooke’s method. Although substantial effort was needed to elicit the inputs of these experts successfully, we anticipate that the elicitation strategy described here will gain momentum in a wide variety of earthquake seismology and engineering hazard and risk analyses where physical model and data limitations are inherent and objective professional judgment can fill gaps.

Extracting recurrent scenarios from narrative texts using a Bayesian network: application to serious occupational accidents with movement disturbance.

PubMed

Abdat, F; Leclercq, S; Cuny, X; Tissot, C

2014-09-01

A probabilistic approach has been developed to extract recurrent serious Occupational Accident with Movement Disturbance (OAMD) scenarios from narrative texts within a prevention framework. Relevant data extracted from 143 accounts was initially coded as logical combinations of generic accident factors. A Bayesian Network (BN)-based model was then built for OAMDs using these data and expert knowledge. A data clustering process was subsequently performed to group the OAMDs into similar classes from generic factor occurrence and pattern standpoints. Finally, the Most Probable Explanation (MPE) was evaluated and identified as the associated recurrent scenario for each class. Using this approach, 8 scenarios were extracted to describe 143 OAMDs in the construction and metallurgy sectors. Their recurrent nature is discussed. Probable generic factor combinations provide a fair representation of particularly serious OAMDs, as described in narrative texts. This work represents a real contribution to raising company awareness of the variety of circumstances, in which these accidents occur, to progressing in the prevention of such accidents and to developing an analysis framework dedicated to this kind of accident. Copyright © 2014 Elsevier Ltd. All rights reserved.

Development of the Transport Class Model (TCM) Aircraft Simulation From a Sub-Scale Generic Transport Model (GTM) Simulation

NASA Technical Reports Server (NTRS)

Hueschen, Richard M.

2011-01-01

A six degree-of-freedom, flat-earth dynamics, non-linear, and non-proprietary aircraft simulation was developed that is representative of a generic mid-sized twin-jet transport aircraft. The simulation was developed from a non-proprietary, publicly available, subscale twin-jet transport aircraft simulation using scaling relationships and a modified aerodynamic database. The simulation has an extended aerodynamics database with aero data outside the normal transport-operating envelope (large angle-of-attack and sideslip values). The simulation has representative transport aircraft surface actuator models with variable rate-limits and generally fixed position limits. The simulation contains a generic 40,000 lb sea level thrust engine model. The engine model is a first order dynamic model with a variable time constant that changes according to simulation conditions. The simulation provides a means for interfacing a flight control system to use the simulation sensor variables and to command the surface actuators and throttle position of the engine model.

Neuro-estimator based GMC control of a batch reactive distillation.

PubMed

Prakash, K J Jithin; Patle, Dipesh S; Jana, Amiya K

2011-07-01

In this paper, an artificial neural network (ANN)-based nonlinear control algorithm is proposed for a simulated batch reactive distillation (RD) column. In the homogeneously catalyzed reactive process, an esterification reaction takes place for the production of ethyl acetate. The fundamental model has been derived incorporating the reaction term in the model structure of the nonreactive distillation process. The process operation is simulated at the startup phase under total reflux conditions. The open-loop process dynamics is also addressed running the batch process at the production phase under partial reflux conditions. In this study, a neuro-estimator based generic model controller (GMC), which consists of an ANN-based state predictor and the GMC law, has been synthesized. Finally, this proposed control law has been tested on the representative batch reactive distillation comparing with a gain-scheduled proportional integral (GSPI) controller and with its ideal performance (ideal GMC). Copyright © 2011 ISA. Published by Elsevier Ltd. All rights reserved.

A Generic Nonlinear Aerodynamic Model for Aircraft

NASA Technical Reports Server (NTRS)

Grauer, Jared A.; Morelli, Eugene A.

2014-01-01

A generic model of the aerodynamic coefficients was developed using wind tunnel databases for eight different aircraft and multivariate orthogonal functions. For each database and each coefficient, models were determined using polynomials expanded about the state and control variables, and an othgonalization procedure. A predicted squared-error criterion was used to automatically select the model terms. Modeling terms picked in at least half of the analyses, which totalled 45 terms, were retained to form the generic nonlinear aerodynamic (GNA) model. Least squares was then used to estimate the model parameters and associated uncertainty that best fit the GNA model to each database. Nonlinear flight simulations were used to demonstrate that the GNA model produces accurate trim solutions, local behavior (modal frequencies and damping ratios), and global dynamic behavior (91% accurate state histories and 80% accurate aerodynamic coefficient histories) under large-amplitude excitation. This compact aerodynamics model can be used to decrease on-board memory storage requirements, quickly change conceptual aircraft models, provide smooth analytical functions for control and optimization applications, and facilitate real-time parametric system identification.

Factors influencing the preference for purchasing generic drugs in a Southern Brazilian city

PubMed Central

Guttier, Marília Cruz; Silveira, Marysabel Pinto Telis; Luiza, Vera Lucia; Bertoldi, Andréa Dâmaso

2017-01-01

ABSTRACT OBJECTIVE The objective of this study is to identify factors associated with the preference for purchasing generic drugs in a medium-sized municipality in Southern Brazil. METHODS We have analyzed data from a population-based cross-sectional study conducted in 2012 with a sample of 2,856 adults (≥ 20 years old). The preference for purchasing generic drugs was the main outcome. The explanatory variables were the demographic and socioeconomic variables. Statistical analyses included Poisson regressions. RESULTS The preference for purchasing generic drugs was 63.2% (95%CI 61.4–64.9). The variables correlated with this preference in the fully adjusted models were: male (prevalence ratio [PR] = 1.08; 95%CI 1.03–1.14), age of 20–39 years (PR = 1.10; 95%CI 1.02–1.20), low socioeconomic status (PR = 1.15; 95%CI 1.03–1.28), and good knowledge about generic drugs (PR= 4.66; 95%CI 2.89–7.52). Among those who preferred to purchase generic drugs, 55.1% have reported accepting to replace the prescribed drug (if not a generic) with the equivalent generic drug. Another correlate of the preference for purchasing generic drugs was because individuals consider their quality equivalent to reference medicines (PR = 2.15; 95%CI 1.93–2.41). CONCLUSIONS Knowledge about generic drugs was the main correlate of the preference for purchasing generic drugs. The greater the knowledge or positive perception about generic drugs, the greater is the preference to purchase them. Therefore, educational campaigns for healthcare professionals and consumers appear to be the best strategy for expanding the use of generic drugs in Brazil. PMID:28678909

Determinants of generic drug substitution in Switzerland.

PubMed

Decollogny, Anne; Eggli, Yves; Halfon, Patricia; Lufkin, Thomas M

2011-01-26

Since generic drugs have the same therapeutic effect as the original formulation but at generally lower costs, their use should be more heavily promoted. However, a considerable number of barriers to their wider use have been observed in many countries. The present study examines the influence of patients, physicians and certain characteristics of the generics' market on generic substitution in Switzerland. We used reimbursement claims' data submitted to a large health insurer by insured individuals living in one of Switzerland's three linguistic regions during 2003. All dispensed drugs studied here were substitutable. The outcome (use of a generic or not) was modelled by logistic regression, adjusted for patients' characteristics (gender, age, treatment complexity, substitution groups) and with several variables describing reimbursement incentives (deductible, co-payments) and the generics' market (prices, packaging, co-branded original, number of available generics, etc.). The overall generics' substitution rate for 173,212 dispensed prescriptions was 31%, though this varied considerably across cantons. Poor health status (older patients, complex treatments) was associated with lower generic use. Higher rates were associated with higher out-of-pocket costs, greater price differences between the original and the generic, and with the number of generics on the market, while reformulation and repackaging were associated with lower rates. The substitution rate was 13% lower among hospital physicians. The adoption of the prescribing practices of the canton with the highest substitution rate would increase substitution in other cantons to as much as 26%. Patient health status explained a part of the reluctance to substitute an original formulation by a generic. Economic incentives were efficient, but with a moderate global effect. The huge interregional differences indicated that prescribing behaviours and beliefs are probably the main determinant of generic substitution.

Driver compliance to take-over requests with different auditory outputs in conditional automation.

PubMed

Forster, Yannick; Naujoks, Frederik; Neukum, Alexandra; Huestegge, Lynn

2017-12-01

Conditionally automated driving (CAD) systems are expected to improve traffic safety. Whenever the CAD system exceeds its limit of operation, designers of the system need to ensure a safe and timely enough transition from automated to manual mode. An existing visual Human-Machine Interface (HMI) was supplemented by different auditory outputs. The present work compares the effects of different auditory outputs in form of (1) a generic warning tone and (2) additional semantic speech output on driver behavior for the announcement of an upcoming take-over request (TOR). We expect the information carried by means of speech output to lead to faster reactions and better subjective evaluations by the drivers compared to generic auditory output. To test this assumption, N=17 drivers completed two simulator drives, once with a generic warning tone ('Generic') and once with additional speech output ('Speech+generic'), while they were working on a non-driving related task (NDRT; i.e., reading a magazine). Each drive incorporated one transition from automated to manual mode when yellow secondary lanes emerged. Different reaction time measures, relevant for the take-over process, were assessed. Furthermore, drivers evaluated the complete HMI regarding usefulness, ease of use and perceived visual workload just after experiencing the take-over. They gave comparative ratings on usability and acceptance at the end of the experiment. Results revealed that reaction times, reflecting information processing time (i.e., hands on the steering wheel, termination of NDRT), were shorter for 'Speech+generic' compared to 'Generic' while reaction time, reflecting allocation of attention (i.e., first glance ahead), did not show this difference. Subjective ratings were in favor of the system with additional speech output. Copyright © 2017 Elsevier Ltd. All rights reserved.

[Intention of purchasing generic prescription drugs on the part of consumers in Asturias, Spain].

PubMed

González Hernando, Santiago; González Mieres, Celina; Díaz Martín, Ana M

2003-01-01

Ascertaining how consumers perceive the risk related to the use of generic prescription drugs and those factors which have the greatest impact on the intention to request a generic drug from the prescribing physician and/or the pharmacist for the purpose of determining any possible barriers or hindrances to the acceptance of generics and to gather information to aid healthcare managers in their decision-making processes. Study on prescription drug use revolving around the degree to which patients are willing to request an EFG. In this quantitative transversal study, a total of 542 individuals were individually surveyed upon exiting a healthcare center or pharmacy in Asturias. A scale for measuring the perceived risk involved in the purchase of a prescription drug including 15 attributes grouped into five aspects was included in the questionnaire. Information was also gathered regarding the intention of using generic prescription drugs and on the demographic and socioeconomic characteristics of those surveyed. For the analysis of the results, a factorial confirmational analysis, multiple regression and univariate analysis were used. The data was processed using the EQS and SPSS statistics programs. Mean perception of the risk (scales 1-7): functional: 2.75; physical: 2.68: financial: 2.19; psychological: 1.99; social: 1.42. Factors having a bearing on the intention of requesting generic prescription drugs from their physician: psychological risk (p = 0.000). On requesting the same from their pharmacist: psychological risk (p = 0.000) and social risk (p = 0.020). The agents interested in the development on the EFG market should target their communication efforts on putting the functional and financial aspects of the manufacturer's specialties and generic specialties on the same level, but should not leave out psychological and social aspects of the consumers' purchasing behavior.

Stress-strain analysis of a (0/90)sub 2 symmetric titanium matrix laminate subjected to a generic hypersonic flight profile

NASA Technical Reports Server (NTRS)

Mirdamadi, Massoud; Johnson, W. Steven

1992-01-01

Cross ply laminate behavior of Ti-15V-3Cr-3Al-3Sn (Ti-15-3) matrix reinforced with continuous silicon carbide fibers (SCS-6) subjected to a generic hypersonic flight profile was evaluated experimentally and analytically. Thermomechanical fatigue test techniques were developed to conduct a simulation of a generic hypersonic flight profile. A micromechanical analysis was used. The analysis predicts the stress-strain response of the laminate and of the constituents in each ply during thermal and mechanical cycling by using only constituent properties as input. The fiber was modeled using a thermo-viscoplastic constitutive relation. The fiber transverse modulus was reduced in the analysis to simulate the fiber matrix interface failure. Excellent correlation was found between measured and predicted laminate stress-strain response due to generic hypersonic flight profile when fiber debonding was modeled.

Developing multiple-choices test items as tools for measuring the scientific-generic skills on solar system

NASA Astrophysics Data System (ADS)

Bhakti, Satria Seto; Samsudin, Achmad; Chandra, Didi Teguh; Siahaan, Parsaoran

2017-05-01

The aim of research is developing multiple-choices test items as tools for measuring the scientific of generic skills on solar system. To achieve the aim that the researchers used the ADDIE model consisting Of: Analyzing, Design, Development, Implementation, dan Evaluation, all of this as a method research. While The scientific of generic skills limited research to five indicator including: (1) indirect observation, (2) awareness of the scale, (3) inference logic, (4) a causal relation, and (5) mathematical modeling. The participants are 32 students at one of junior high schools in Bandung. The result shown that multiple-choices that are constructed test items have been declared valid by the expert validator, and after the tests show that the matter of developing multiple-choices test items be able to measuring the scientific of generic skills on solar system.

Perceptions of Adult Males Who Participated in Counseling for Trauma: A Generic Qualitative Study

ERIC Educational Resources Information Center

Pullen, Annette M.

2017-01-01

This generic qualitative inquiry explored the perceptions of adult males regarding their counseling for trauma experiences. Through that exploration, literature was enhanced considering the information processing theory. Individual interviews of 10 men were conducted using semi-structured, open-ended questions. Braun and Clarke's thematic analysis…

Vocational Education Students' Generic Working Life Competencies: Developing a Self-Assessment Instrument

ERIC Educational Resources Information Center

Kyndt, Eva; Janssens, Ine; Coertjens, Liesje; Gijbels, David; Donche, Vincent; Van Petegem, Peter

2014-01-01

The current study reports on the process of developing a self-assessment instrument for vocational education students' generic working life competencies. The instrument was developed based on a competence framework and in close collaboration with several vocational education teachers and intermediary organisations offering various human…

Pharmaceutical meaning-making beyond marketing: racialized subjects of generic thiazide.

PubMed

Pollock, Anne

2008-01-01

In contrast to discussions of BiDil, this paper explores racial meaning-making processes around an old generic hypertension drug. By unpacking a vignette about race and thiazide outside marketing or medicine, it shows that racialization of drugs exceeds those spheres and moves in unpredictable ways.

STDP Installs in Winner-Take-All Circuits an Online Approximation to Hidden Markov Model Learning

PubMed Central

Kappel, David; Nessler, Bernhard; Maass, Wolfgang

2014-01-01

In order to cross a street without being run over, we need to be able to extract very fast hidden causes of dynamically changing multi-modal sensory stimuli, and to predict their future evolution. We show here that a generic cortical microcircuit motif, pyramidal cells with lateral excitation and inhibition, provides the basis for this difficult but all-important information processing capability. This capability emerges in the presence of noise automatically through effects of STDP on connections between pyramidal cells in Winner-Take-All circuits with lateral excitation. In fact, one can show that these motifs endow cortical microcircuits with functional properties of a hidden Markov model, a generic model for solving such tasks through probabilistic inference. Whereas in engineering applications this model is adapted to specific tasks through offline learning, we show here that a major portion of the functionality of hidden Markov models arises already from online applications of STDP, without any supervision or rewards. We demonstrate the emergent computing capabilities of the model through several computer simulations. The full power of hidden Markov model learning can be attained through reward-gated STDP. This is due to the fact that these mechanisms enable a rejection sampling approximation to theoretically optimal learning. We investigate the possible performance gain that can be achieved with this more accurate learning method for an artificial grammar task. PMID:24675787

Follow-on biologics: competition in the biopharmaceutical marketplace.

PubMed

Devine, Joshua W; Cline, Richard R; Farley, Joel F

2006-01-01

To describe the implications of a follow-on biologic approval process with focus on current stakeholders, implications of the status quo, and recommendations for future policy. A search using Medline, International Pharmaceutical Abstracts, Med Ad News, F-D-C Reports/Pink Sheets, and Google index directories was conducted with terms such as biologic, biopharmaceutical, generic, and follow-on. Articles pertaining to the follow-on biologic debate. By the authors. Over the past decade, the biopharmaceutical market has experienced substantial growth in the number of product approvals and sales. In contrast with prescription medications, biologic agents currently lack an abbreviated regulatory approval process. Evidence from the Drug Price Competition and Patent Term Restoration Act of 1984 suggests that reducing barriers to generic competition in the pharmaceutical market successfully increases generic market penetration and reduces overall prices to consumers. Although scientific and regulatory dissimilarities between biopharmaceuticals and other medications exist, a follow-on biologic approval process has the potential to play an important role in containing growth in pharmaceutical spending. In addition to biopharmaceutical and generic biopharmaceutical manufacturers, stakeholders with a vested interest in this debate include individual consumers who continue to bear the burden of spending increases in the pharmaceutical market. The debate over a follow-on process likely will be difficult as parties seek a balance between incentives for biopharmaceutical innovation, consumer safety, and affordability of existing biologic products.

Random Wiring, Ganglion Cell Mosaics, and the Functional Architecture of the Visual Cortex

PubMed Central

Coppola, David; White, Leonard E.; Wolf, Fred

2015-01-01

The architecture of iso-orientation domains in the primary visual cortex (V1) of placental carnivores and primates apparently follows species invariant quantitative laws. Dynamical optimization models assuming that neurons coordinate their stimulus preferences throughout cortical circuits linking millions of cells specifically predict these invariants. This might indicate that V1’s intrinsic connectome and its functional architecture adhere to a single optimization principle with high precision and robustness. To validate this hypothesis, it is critical to closely examine the quantitative predictions of alternative candidate theories. Random feedforward wiring within the retino-cortical pathway represents a conceptually appealing alternative to dynamical circuit optimization because random dimension-expanding projections are believed to generically exhibit computationally favorable properties for stimulus representations. Here, we ask whether the quantitative invariants of V1 architecture can be explained as a generic emergent property of random wiring. We generalize and examine the stochastic wiring model proposed by Ringach and coworkers, in which iso-orientation domains in the visual cortex arise through random feedforward connections between semi-regular mosaics of retinal ganglion cells (RGCs) and visual cortical neurons. We derive closed-form expressions for cortical receptive fields and domain layouts predicted by the model for perfectly hexagonal RGC mosaics. Including spatial disorder in the RGC positions considerably changes the domain layout properties as a function of disorder parameters such as position scatter and its correlations across the retina. However, independent of parameter choice, we find that the model predictions substantially deviate from the layout laws of iso-orientation domains observed experimentally. Considering random wiring with the currently most realistic model of RGC mosaic layouts, a pairwise interacting point process, the predicted layouts remain distinct from experimental observations and resemble Gaussian random fields. We conclude that V1 layout invariants are specific quantitative signatures of visual cortical optimization, which cannot be explained by generic random feedforward-wiring models. PMID:26575467

Evaluation of the "e-rater"® Scoring Engine for the "GRE"® Issue and Argument Prompts. Research Report. ETS RR-12-02

ERIC Educational Resources Information Center

Ramineni, Chaitanya; Trapani, Catherine S.; Williamson, David M.; Davey, Tim; Bridgeman, Brent

2012-01-01

Automated scoring models for the "e-rater"® scoring engine were built and evaluated for the "GRE"® argument and issue-writing tasks. Prompt-specific, generic, and generic with prompt-specific intercept scoring models were built and evaluation statistics such as weighted kappas, Pearson correlations, standardized difference in…

WHO Expert Committee on Specifications for Pharmaceutical Preparations. Forty-ninth report.

PubMed

2015-01-01

The Expert Committee on Specifications for Pharmaceutical Preparations works towards clear, independent and practical standards and guidelines for the quality assurance of medicines. Standards are developed by the Committee through worldwide consultation and an international consensus-building process. The following new guidelines were adopted and recommended for use. Revised procedure for the development of monographs and other texts for The International Pharmacopoeia; Revised updating mechanism for the section on radiopharmaceuticals in The International Pharmacopoeia; Revision of the supplementary guidelines on good manufacturing practices: validation, Appendix 7: non-sterile process validation; General guidance for inspectors on hold-time studies; 16 technical supplements to Model guidance for the storage and transport of time- and temperature-sensitive pharmaceutical products; Recommendations for quality requirements when plant-derived artemisinin is used as a starting material in the production of antimalarial active pharmaceutical ingredients; Multisource (generic) pharmaceutical products: guidelines on registration requirements to establish interchangeability: revision; Guidance on the selection of comparator pharmaceutical products for equivalence assessment of interchangeable multisource (generic) products: revision; and Good review practices: guidelines for national and regional regulatory authorities.

Race and Gender Matter: A Multidimensional Approach to Conceptualizing and Measuring Stress in African American Women

PubMed Central

Woods-Giscombé, Cheryl L.; Lobel, Marci

2008-01-01

Based on prior research and theory, the authors constructed a multidimensional model of stress in African American women comprised of race-related, gender-related, and generic stress. Exposure to and appraisal of these three types of stress were combined into a higher-order global stress factor. Using structural equation modeling, the fit of this stress factor and its ability to predict distress symptoms were examined in 189 socioeconomically diverse African American women aged 21 to 78. Results support the multidimensional conceptualization and operationalization of stress. Race-related, gender-related, and generic stress contributed equally to the global stress factor, and global stress predicted a significant amount of variance in distress symptoms and intensity. This model exhibited better fit than a model without a global stress factor, in which each stress component predicted distress directly. Furthermore, race-related, gender-related, and generic stress did not contribute to distress beyond their representation in the global stress factor. These findings illustrate that stress related to central elements of identity, namely race and gender, cohere with generic stress to define the stress experience of African American women. PMID:18624581

Race and gender matter: a multidimensional approach to conceptualizing and measuring stress in African American women.

PubMed

Woods-Giscombé, Cheryl L; Lobel, Marci

2008-07-01

Based on prior research and theory, the authors constructed a multidimensional model of stress in African American women comprised of race-related, gender-related, and generic stress. Exposure to and appraisal of these three types of stress were combined into a higher-order global stress factor. Using structural equation modeling, the fit of this stress factor and its ability to predict distress symptoms were examined in 189 socioeconomically diverse African American women aged 21 to 78. Results support the multidimensional conceptualization and operationalization of stress. Race-related, gender-related, and generic stress contributed equally to the global stress factor, and global stress predicted a significant amount of variance in distress symptoms and intensity. This model exhibited better fit than a model without a global stress factor, in which each stress component predicted distress directly. Furthermore, race-related, gender-related, and generic stress did not contribute to distress beyond their representation in the global stress factor. These findings illustrate that stress related to central elements of identity, namely race and gender, cohere with generic stress to define the stress experience of African American women. Copyright (c) 2008 APA, all rights reserved.

Cultural safety as an ethic of care: a praxiological process.

PubMed

McEldowney, Rose; Connor, Margaret J

2011-10-01

New writings broadening the construct of cultural safety, a construct initiated in Aotearoa New Zealand, are beginning to appear in the literature. Therefore, it is considered timely to integrate these writings and advance the construct into a new theoretical model. The new model reconfigures the constructs of cultural safety and cultural competence as an ethic of care informed by a postmodern perspective. Central to the new model are three interwoven, co-occurring components: an ethic of care, which unfolds within a praxiological process shaped by the context. Context is expanded through identifying the three concepts of relationality, generic competence, and collectivity, which are integral to each client-nurse encounter. The competence associated with cultural safety as an ethic of care is always in the process of development. Clients and nurses engage in a dialogue to establish the level of cultural safety achieved at given points in a care trajectory.

A survey exploring knowledge and perceptions of general practitioners towards the use of generic medicines in the northern state of Malaysia.

PubMed

Chua, Gin Nie; Hassali, Mohamed Azmi; Shafie, Asrul Akmal; Awaisu, Ahmed

2010-05-01

The objective of this study was to evaluate the general practitioners' (GPs') knowledge and perceptions towards generic medicines in a northern state of Malaysia. A postal cross-sectional survey involving registered GPs in Penang, Malaysia was undertaken. A 23-item questionnaire was developed, validated and administered on the GPs. Eighty-seven GPs responded to the survey (response rate 26.8%). The majority of the respondents (85.1%) claimed that they actively prescribed generic medicines in their practice. On the other hand, only 4.6% of the respondents correctly identified the Malaysia's National Pharmaceutical Control Bureau's bioequivalence standard for generic products. There were misconceptions among the respondents about the concepts of "bioequivalence", "efficacy", "safety", and "manufacturing standards" of generic medicines. GPs in this survey believed that a standard guideline on brand substitution process, collaboration with pharmacists, patient education and information on safety and efficacy of generic medicines were necessary to ensure quality use of generics. Furthermore, advertisements and product bonuses offered by pharmaceutical companies, patient's socio-economic factors as well as credibility of manufacturers were factors reported to influence their choice of medicine. Although it appeared that GPs have largely accepted the use of generic medicines, they still have concerns regarding the reliability and quality of such products. GPs need to be educated and reassured about generic products approval system in Malaysia concerning bioequivalence, quality, and safety. The current findings have important implications in establishing generic medicines policy in Malaysia. Copyright (c) 2009 Elsevier Ireland Ltd. All rights reserved.

On the relevance of modeling viscoelastic bending behavior in finite element forming simulation of continuously fiber reinforced thermoplastics

NASA Astrophysics Data System (ADS)

Dörr, Dominik; Schirmaier, Fabian J.; Henning, Frank; Kärger, Luise

2017-10-01

Finite Element (FE) forming simulation offers the possibility of a detailed analysis of the deformation behavior of multilayered thermoplastic blanks during forming, considering material behavior and process conditions. Rate-dependent bending behavior is a material characteristic, which is so far not considered in FE forming simulation of pre-impregnated, continuously fiber reinforced polymers (CFRPs). Therefore, an approach for modeling viscoelastic bending behavior in FE composite forming simulation is presented in this work. The presented approach accounts for the distinct rate-dependent bending behavior of e.g. thermoplastic CFRPs at process conditions. The approach is based on a Voigt-Kelvin (VK) and a generalized Maxwell (GM) approach, implemented within a FE forming simulation framework implemented in several user-subroutines of the commercially available FE solver Abaqus. The VK, GM, as well as purely elastic bending modeling approaches are parameterized according to dynamic bending characterization results for a PA6-CF UD-tape. It is found that only the GM approach is capable to represent the bending deformation characteristic for all of the considered bending deformation rates. The parameterized bending modeling approaches are applied to a hemisphere test and to a generic geometry. A comparison of the forming simulation results of the generic geometry to experimental tests show a good agreement between simulation and experiments. Furthermore, the simulation results reveal that especially a correct modeling of the initial bending stiffness is relevant for the prediction of wrinkling behavior, as a similar onset of wrinkles is observed for the GM, the VK and an elastic approach, fitted to the stiffness observed in the dynamic rheometer test for low curvatures. Hence, characterization and modeling of rate-dependent bending behavior is crucial for FE forming simulation of thermoplastic CFRPs.

A suite of models to support the quantitative assessment of spread in pest risk analysis.

PubMed

Robinet, Christelle; Kehlenbeck, Hella; Kriticos, Darren J; Baker, Richard H A; Battisti, Andrea; Brunel, Sarah; Dupin, Maxime; Eyre, Dominic; Faccoli, Massimo; Ilieva, Zhenya; Kenis, Marc; Knight, Jon; Reynaud, Philippe; Yart, Annie; van der Werf, Wopke

2012-01-01

Pest Risk Analyses (PRAs) are conducted worldwide to decide whether and how exotic plant pests should be regulated to prevent invasion. There is an increasing demand for science-based risk mapping in PRA. Spread plays a key role in determining the potential distribution of pests, but there is no suitable spread modelling tool available for pest risk analysts. Existing models are species specific, biologically and technically complex, and data hungry. Here we present a set of four simple and generic spread models that can be parameterised with limited data. Simulations with these models generate maps of the potential expansion of an invasive species at continental scale. The models have one to three biological parameters. They differ in whether they treat spatial processes implicitly or explicitly, and in whether they consider pest density or pest presence/absence only. The four models represent four complementary perspectives on the process of invasion and, because they have different initial conditions, they can be considered as alternative scenarios. All models take into account habitat distribution and climate. We present an application of each of the four models to the western corn rootworm, Diabrotica virgifera virgifera, using historic data on its spread in Europe. Further tests as proof of concept were conducted with a broad range of taxa (insects, nematodes, plants, and plant pathogens). Pest risk analysts, the intended model users, found the model outputs to be generally credible and useful. The estimation of parameters from data requires insights into population dynamics theory, and this requires guidance. If used appropriately, these generic spread models provide a transparent and objective tool for evaluating the potential spread of pests in PRAs. Further work is needed to validate models, build familiarity in the user community and create a database of species parameters to help realize their potential in PRA practice.

A Suite of Models to Support the Quantitative Assessment of Spread in Pest Risk Analysis

PubMed Central

Robinet, Christelle; Kehlenbeck, Hella; Kriticos, Darren J.; Baker, Richard H. A.; Battisti, Andrea; Brunel, Sarah; Dupin, Maxime; Eyre, Dominic; Faccoli, Massimo; Ilieva, Zhenya; Kenis, Marc; Knight, Jon; Reynaud, Philippe; Yart, Annie; van der Werf, Wopke

2012-01-01

Pest Risk Analyses (PRAs) are conducted worldwide to decide whether and how exotic plant pests should be regulated to prevent invasion. There is an increasing demand for science-based risk mapping in PRA. Spread plays a key role in determining the potential distribution of pests, but there is no suitable spread modelling tool available for pest risk analysts. Existing models are species specific, biologically and technically complex, and data hungry. Here we present a set of four simple and generic spread models that can be parameterised with limited data. Simulations with these models generate maps of the potential expansion of an invasive species at continental scale. The models have one to three biological parameters. They differ in whether they treat spatial processes implicitly or explicitly, and in whether they consider pest density or pest presence/absence only. The four models represent four complementary perspectives on the process of invasion and, because they have different initial conditions, they can be considered as alternative scenarios. All models take into account habitat distribution and climate. We present an application of each of the four models to the western corn rootworm, Diabrotica virgifera virgifera, using historic data on its spread in Europe. Further tests as proof of concept were conducted with a broad range of taxa (insects, nematodes, plants, and plant pathogens). Pest risk analysts, the intended model users, found the model outputs to be generally credible and useful. The estimation of parameters from data requires insights into population dynamics theory, and this requires guidance. If used appropriately, these generic spread models provide a transparent and objective tool for evaluating the potential spread of pests in PRAs. Further work is needed to validate models, build familiarity in the user community and create a database of species parameters to help realize their potential in PRA practice. PMID:23056174

A generic architecture for an adaptive, interoperable and intelligent type 2 diabetes mellitus care system.

PubMed

Uribe, Gustavo A; Blobel, Bernd; López, Diego M; Schulz, Stefan

2015-01-01

Chronic diseases such as Type 2 Diabetes Mellitus (T2DM) constitute a big burden to the global health economy. T2DM Care Management requires a multi-disciplinary and multi-organizational approach. Because of different languages and terminologies, education, experiences, skills, etc., such an approach establishes a special interoperability challenge. The solution is a flexible, scalable, business-controlled, adaptive, knowledge-based, intelligent system following a systems-oriented, architecture-centric, ontology-based and policy-driven approach. The architecture of real systems is described, using the basics and principles of the Generic Component Model (GCM). For representing the functional aspects of a system the Business Process Modeling Notation (BPMN) is used. The system architecture obtained is presented using a GCM graphical notation, class diagrams and BPMN diagrams. The architecture-centric approach considers the compositional nature of the real world system and its functionalities, guarantees coherence, and provides right inferences. The level of generality provided in this paper facilitates use case specific adaptations of the system. By that way, intelligent, adaptive and interoperable T2DM care systems can be derived from the presented model as presented in another publication.

Modeling generic aspects of ideal fibril formation

DOE Office of Scientific and Technical Information (OSTI.GOV)

Michel, D., E-mail: denis.michel@live.fr

Many different proteins self-aggregate into insoluble fibrils growing apically by reversible addition of elementary building blocks. But beyond this common principle, the modalities of fibril formation are very disparate, with various intermediate forms which can be reshuffled by minor modifications of physico-chemical conditions or amino-acid sequences. To bypass this complexity, the multifaceted phenomenon of fibril formation is reduced here to its most elementary principles defined for a linear prototype of fibril. Selected generic features, including nucleation, elongation, and conformational recruitment, are modeled using minimalist hypotheses and tools, by separating equilibrium from kinetic aspects and in vitro from in vivo conditions.more » These reductionist approaches allow to bring out known and new rudiments, including the kinetic and equilibrium effects of nucleation, the dual influence of elongation on nucleation, the kinetic limitations on nucleation and fibril numbers, and the accumulation of complexes in vivo by rescue from degradation. Overlooked aspects of these processes are also pointed: the exponential distribution of fibril lengths can be recovered using various models because it is attributable to randomness only. It is also suggested that the same term “critical concentration” is used for different things, involved in either nucleation or elongation.« less

Modeling generic aspects of ideal fibril formation

NASA Astrophysics Data System (ADS)

Michel, D.

2016-01-01

Many different proteins self-aggregate into insoluble fibrils growing apically by reversible addition of elementary building blocks. But beyond this common principle, the modalities of fibril formation are very disparate, with various intermediate forms which can be reshuffled by minor modifications of physico-chemical conditions or amino-acid sequences. To bypass this complexity, the multifaceted phenomenon of fibril formation is reduced here to its most elementary principles defined for a linear prototype of fibril. Selected generic features, including nucleation, elongation, and conformational recruitment, are modeled using minimalist hypotheses and tools, by separating equilibrium from kinetic aspects and in vitro from in vivo conditions. These reductionist approaches allow to bring out known and new rudiments, including the kinetic and equilibrium effects of nucleation, the dual influence of elongation on nucleation, the kinetic limitations on nucleation and fibril numbers, and the accumulation of complexes in vivo by rescue from degradation. Overlooked aspects of these processes are also pointed: the exponential distribution of fibril lengths can be recovered using various models because it is attributable to randomness only. It is also suggested that the same term "critical concentration" is used for different things, involved in either nucleation or elongation.

NETL to establish Dynamic Simulation Research and Training Center to promote IGCC technology with CO2 cpture

DOE Office of Scientific and Technical Information (OSTI.GOV)

Provost, G.; Zitney, S.; Turton, R.

2009-01-01

To meet increasing demand for education and experience with commercial-scale, coal-fired, integrated gasification combined cycle (IGCC) plants with CO2 capture, the Department of Energy’s (DOE) National Energy Technology Laboratory (NETL) is leading a project to deploy a generic, full-scope, real-time IGCC dynamic plant simulator for use in establishing a world-class research and training center, and to promote and demonstrate IGCC technology to power industry personnel. The simulator, being built by Invensys Process Systems (IPS), will be installed at two separate sites, at NETL and West Virginia University (WVU), and will combine a process/gasification simulator with a power/combined-cycle simulator together inmore » a single dynamic simulation framework for use in engineering research studies and training applications. The simulator, scheduled to be launched in mid-year 2010, will have the following capabilities: High-fidelity, dynamic model of process-side (gasification and gas cleaning with CO2 capture) and power-block-side (combined cycle) for a generic IGCC plant fueled by coal and/or petroleum coke. Highly flexible configuration that allows concurrent training on separate gasification and combined cycle simulators, or up to two IGCC simulators. Ability to enhance and modify the plant model to facilitate studies of changes in plant configuration, equipment, and control strategies to support future R&D efforts. Training capabilities including startup, shutdown, load following and shedding, response to fuel and ambient condition variations, control strategy analysis (turbine vs. gasifier lead, etc.), representative malfunctions/trips, alarms, scenarios, trending, snapshots, data historian, etc. To support this effort, process descriptions and control strategies were developed for key sections of the plant as part of the detailed functional specification, which is serving as the basis of the simulator development. In this paper, we highlight the contents of the detailed functional specification for the simulator. We also describe the engineering, design, and expert testing process that the simulator will undergo in order to ensure that maximum fidelity is built into the generic simulator. Future applications and training programs associated with gasification, combined cycle, and IGCC simulations are discussed, including plant operation and control demonstrations, as well as education and training services.« less

Simulation methods supporting homologation of Electronic Stability Control in vehicle variants

NASA Astrophysics Data System (ADS)

Lutz, Albert; Schick, Bernhard; Holzmann, Henning; Kochem, Michael; Meyer-Tuve, Harald; Lange, Olav; Mao, Yiqin; Tosolin, Guido

2017-10-01

Vehicle simulation has a long tradition in the automotive industry as a powerful supplement to physical vehicle testing. In the field of Electronic Stability Control (ESC) system, the simulation process has been well established to support the ESC development and application by suppliers and Original Equipment Manufacturers (OEMs). The latest regulation of the United Nations Economic Commission for Europe UN/ECE-R 13 allows also for simulation-based homologation. This extends the usage of simulation from ESC development to homologation. This paper gives an overview of simulation methods, as well as processes and tools used for the homologation of ESC in vehicle variants. The paper first describes the generic homologation process according to the European Regulation (UN/ECE-R 13H, UN/ECE-R 13/11) and U.S. Federal Motor Vehicle Safety Standard (FMVSS 126). Subsequently the ESC system is explained as well as the generic application and release process at the supplier and OEM side. Coming up with the simulation methods, the ESC development and application process needs to be adapted for the virtual vehicles. The simulation environment, consisting of vehicle model, ESC model and simulation platform, is explained in detail with some exemplary use-cases. In the final section, examples of simulation-based ESC homologation in vehicle variants are shown for passenger cars, light trucks, heavy trucks and trailers. This paper is targeted to give a state-of-the-art account of the simulation methods supporting the homologation of ESC systems in vehicle variants. However, the described approach and the lessons learned can be used as reference in future for an extended usage of simulation-supported releases of the ESC system up to the development and release of driver assistance systems.

Effects of the Neutrino B-term on SLepton Mixing and Electric Dipole Moments

DOE Office of Scientific and Technical Information (OSTI.GOV)

Farzan, Y

2003-10-10

The supersymmetric standard model with right-handed neutrino supermultiplets generically contains a soft supersymmetry breaking mass term: {delta}L = 1/2B{sub {nu}}M{tilde {nu}}{sub R}{tilde {nu}}{sub R}. The authors call this operator the ''neutrino B-term''. We show that the neutrino B-term can give the dominant effects from the neutrino sector to lepton flavor violating processes and to lepton electric dipole moments.

MEqTrees Telescope and Radio-sky Simulations and CPU Benchmarking

NASA Astrophysics Data System (ADS)

Shanmugha Sundaram, G. A.

2009-09-01

MEqTrees is a Python-based implementation of the classical Measurement Equation, wherein the various 2×2 Jones matrices are parametrized representations in the spatial and sky domains for any generic radio telescope. Customized simulations of radio-source sky models and corrupt Jones terms are demonstrated based on a policy framework, with performance estimates derived for array configurations, ``dirty''-map residuals and processing power requirements for such computations on conventional platforms.

Comparing Generic Drug Markets in Europe and the United States: Prices, Volumes, and Spending.

PubMed

Wouters, Olivier J; Kanavos, Panos G; McKEE, Martin

2017-09-01

Policy Points: Our study indicates that there are opportunities for cost savings in generic drug markets in Europe and the United States. Regulators should make it easier for generic drugs to reach the market. Regulators and payers should apply measures to stimulate price competition among generic drugmakers and to increase generic drug use. To meaningfully evaluate policy options, it is important to analyze historical context and understand why similar initiatives failed previously. Rising drug prices are putting pressure on health care budgets. Policymakers are assessing how they can save money through generic drugs. We compared generic drug prices and market shares in 13 European countries, using data from 2013, to assess the amount of variation that exists between countries. To place these results in context, we reviewed evidence from recent studies on the prices and use of generics in Europe and the United States. We also surveyed peer-reviewed studies, gray literature, and books published since 2000 to (1) outline existing generic drug policies in European countries and the United States; (2) identify ways to increase generic drug use and to promote price competition among generic drug companies; and (3) explore barriers to implementing reform of generic drug policies, using a historical example from the United States as a case study. The prices and market shares of generics vary widely across Europe. For example, prices charged by manufacturers in Switzerland are, on average, more than 2.5 times those in Germany and more than 6 times those in the United Kingdom, based on the results of a commonly used price index. The proportion of prescriptions filled with generics ranges from 17% in Switzerland to 83% in the United Kingdom. By comparison, the United States has historically had low generic drug prices and high rates of generic drug use (84% in 2013), but has in recent years experienced sharp price increases for some off-patent products. There are policy solutions to address issues in Europe and the United States, such as streamlining the generic drug approval process and requiring generic prescribing and substitution where such policies are not yet in place. The history of substitution laws in the United States provides insights into the economic, political, and cultural issues influencing the adoption of generic drug policies. Governments should apply coherent supply- and demand-side policies in generic drug markets. An immediate priority is to convince more physicians, pharmacists, and patients that generic drugs are bioequivalent to branded products. Special-interest groups continue to obstruct reform in Europe and the United States. © 2017 The Authors The Milbank Quarterly published by Wiley Periodicals, Inc. on behalf of The Millbank Memorial Fund.

An IT Architecture for Systems Medicine.

PubMed

Ganzinger, Matthias; Gietzelt, Matthias; Karmen, Christian; Firnkorn, Daniel; Knaup, Petra

2015-01-01

Systems medicine aims to support treatment of complex diseases like cancer by integrating all available data for the disease. To provide such a decision support in clinical practice, a suitable IT architecture is necessary. We suggest a generic architecture comprised of the following three layers: data representation, decision support, and user interface. For the systems medicine research project "Clinically-applicable, omics-based assessment of survival, side effects, and targets in multiple myeloma" (CLIOMMICS) we developed a concrete instance of the generic architecture. We use i2b2 for representing the harmonized data. Since no deterministic model exists for multiple myeloma we use case-based reasoning for decision support. For clinical practice, visualizations of the results must be intuitive and clear. At the same time, they must communicate the uncertainty immanent in stochastic processes. Thus, we develop a specific user interface for systems medicine based on the web portal software Liferay.

Competency-based models of learning for engineers: a comparison

NASA Astrophysics Data System (ADS)

Lunev, Alexander; Petrova, Irina; Zaripova, Viktoria

2013-10-01

One of the goals of higher professional education is to develop generic student competencies across a variety of disciplines that play a crucial role in education and that provide wider opportunities for graduates in finding good jobs and more chance of promotion. In this article a list of generic competencies developed in Russian universities is compared with a similar list developed by a consortium of Russian and European universities (project TUNING-RUSSIA). Then there is a second comparison with a list of competencies taken from the CDIO Syllabus. This comparison indicates the degree of similarity among the lists and the possible convergence among universities all over the world. The results are taken from a survey carried out among Russian employers, academics, and graduates. The survey asked to rate each listed competence by its importance and the degree of achieving goals in the process of the education.

Population biological principles of drug-resistance evolution in infectious diseases.

PubMed

zur Wiesch, Pia Abel; Kouyos, Roger; Engelstädter, Jan; Regoes, Roland R; Bonhoeffer, Sebastian

2011-03-01

The emergence of resistant pathogens in response to selection pressure by drugs and their possible disappearance when drug use is discontinued are evolutionary processes common to many pathogens. Population biological models have been used to study the dynamics of resistance in viruses, bacteria, and eukaryotic microparasites both at the level of the individual treated host and of the treated host population. Despite the existence of generic features that underlie such evolutionary dynamics, different conclusions have been reached about the key factors affecting the rate of resistance evolution and how to best use drugs to minimise the risk of generating high levels of resistance. Improved understanding of generic versus specific population biological aspects will help to translate results between different studies, and allow development of a more rational basis for sustainable drug use than exists at present. Copyright © 2011 Elsevier Ltd. All rights reserved.

EEG-based driver fatigue detection using hybrid deep generic model.

PubMed

Phyo Phyo San; Sai Ho Ling; Rifai Chai; Tran, Yvonne; Craig, Ashley; Hung Nguyen

2016-08-01

Classification of electroencephalography (EEG)-based application is one of the important process for biomedical engineering. Driver fatigue is a major case of traffic accidents worldwide and considered as a significant problem in recent decades. In this paper, a hybrid deep generic model (DGM)-based support vector machine is proposed for accurate detection of driver fatigue. Traditionally, a probabilistic DGM with deep architecture is quite good at learning invariant features, but it is not always optimal for classification due to its trainable parameters are in the middle layer. Alternatively, Support Vector Machine (SVM) itself is unable to learn complicated invariance, but produces good decision surface when applied to well-behaved features. Consolidating unsupervised high-level feature extraction techniques, DGM and SVM classification makes the integrated framework stronger and enhance mutually in feature extraction and classification. The experimental results showed that the proposed DBN-based driver fatigue monitoring system achieves better testing accuracy of 73.29 % with 91.10 % sensitivity and 55.48 % specificity. In short, the proposed hybrid DGM-based SVM is an effective method for the detection of driver fatigue in EEG.

Composite structural materials

NASA Technical Reports Server (NTRS)

Loewy, R.; Wiberley, S. E.

1986-01-01

Overall emphasis is on basic long-term research in the following categories: constituent materials, composite materials, generic structural elements, processing science technology; and maintaining long-term structural integrity. Research in basic composition, characteristics, and processing science of composite materials and their constituents is balanced against the mechanics, conceptual design, fabrication, and testing of generic structural elements typical of aerospace vehicles so as to encourage the discovery of unusual solutions to present and future problems. Detailed descriptions of the progress achieved in the various component parts of this comprehensive program are presented.

Human life support during interplanetary travel and domicile. VI - Generic modular flow schematic for hybrid physical/chemical-biological life support systems

NASA Technical Reports Server (NTRS)

Ganapathi, Gani B.; Seshan, P. K.; Ferrall, Joseph; Rohatgi, Naresh

1992-01-01

An extension is proposed for the NASA Space Exploration Initiative's Generic Modular Flow Schematics for physical/chemical life support systems which involves the addition of biological processes. The new system architecture includes plant, microbial, and animal habitat, as well as the human habitat subsystem. Major Feedstock Production and Food Preparation and Packaging components have also been incorporated. Inedible plant, aquaculture, microbial, and animal solids are processed for recycling.

Development and validation of a tool to assess knowledge and attitudes towards generic medicines among students in Greece: The ATtitude TOwards GENerics (ATTOGEN) questionnaire

PubMed Central

Katsari, Vasiliki; Niakas, Dimitris

2017-01-01

Introduction The use of generic medicines is a cost-effective policy, often dictated by fiscal restraints. To our knowledge, no fully validated tool exploring the students’ knowledge and attitudes towards generic medicines exists. The aim of our study was to develop and validate a questionnaire exploring the knowledge and attitudes of M.Sc. in Health Care Management students and recent alumni’s towards generic drugs in Greece. Materials and methods The development of the questionnaire was a result of literature review and pilot-testing of its preliminary versions to researchers and students. The final version of the questionnaire contains 18 items measuring the respondents’ knowledge and attitude towards generic medicines on a 5-point Likert scale. Given the ordinal nature of the data, ordinal alpha and polychoric correlations were computed. The sample was randomly split into two halves. Exploratory factor analysis, performed in the first sample, was used for the creation of multi-item scales. Confirmatory factor analysis and Generalized Linear Latent and Mixed Model analysis (GLLAMM) with the use of the rating scale model were used in the second sample to assess goodness of fit. An assessment of internal consistency reliability, test-retest reliability, and construct validity was also performed. Results Among 1402 persons contacted, 986 persons completed our questionnaire (response rate = 70.3%). Overall Cronbach’s alpha was 0.871. The conjoint use of exploratory and confirmatory factor analysis resulted in a six-scale model, which seemed to fit the data well. Five of the six scales, namely trust, drug quality, state audit, fiscal impact and drug substitution were found to be valid and reliable, while the knowledge scale suffered only from low inter-scale correlations and a ceiling effect. However, the subsequent confirmatory factor and GLLAMM analyses indicated a good fit of the model to the data. Conclusions The ATTOGEN instrument proved to be a reliable and valid tool, suitable for assessing students’ knowledge and attitudes towards generic medicines. PMID:29186163

Fractal geometry as a new approach for proving nanosimilarity: a reflection note.

PubMed

Demetzos, Costas; Pippa, Natassa

2015-04-10

Nanosimilars are considered as new medicinal outcomes combining the generic drugs and the nanocarrier as an innovative excipient, in order to evaluate them as final products. They belong to the grey area - concerning the evaluation process - between generic drugs and biosimilar medicinal products. Generic drugs are well documented and a huge number of them are in market, replacing effectively the off-patent drugs. The scientific approach for releasing them to the market is based on bioequivalence studies, which are well documented and accepted by the regulatory agencies. On the other hand, the structural complexity of biological/biotechnology-derived products demands a new approach for the approval process taking into consideration that bioequivalence studies are not considered as sufficient as in generic drugs, and new clinical trials are needed to support their approval process of the product to the market. In proportion, due to technological complexity of nanomedicines, the approaches for proving the statistical identity or the similarity for generic and biosimilar products, respectively, with those of prototypes, are not considered as effective for nanosimilar products. The aim of this note is to propose a complementary approach which can provide realistic evidences concerning the nanosimilarity, based on fractal analysis. This approach is well fit with the structural complexity of nanomedicines and smooths the difficulties for proving the similarity between off-patent and nanosimilar products. Fractal analysis could be considered as the approach that completely characterizes the physicochemical/morphological characteristics of nanosimilar products and could be proposed as a start point for a deep discussion on nanosimilarity. Copyright © 2015 Elsevier B.V. All rights reserved.

Generic Skill Development and Learning/Assessment Process: Use of Rubrics and Student Validation

ERIC Educational Resources Information Center

Iborra Urios, Montserrat; Ramirez Rangel, Eliana; Bringué Tomàs, Roger; Tejero Salvador, Javier; Cunill García, Fidel; Fité Piquer, Carles

2015-01-01

To fulfill the European Higher Education context in the subject of the Chemical Engineering Undergraduate Degree of University of Barcelona named "Chemical Engineering Experimentation II" team work, written and oral communication generic skills were developed and assessed by means of rubrics. In order to appraise the methodological…

A Narrative Review of Generic Intervention Fidelity Measures

ERIC Educational Resources Information Center

Di Rezze, Briano; Law, Mary; Gorter, Jan Willem; Eva, Kevin; Pollock, Nancy

2012-01-01

To increase the rigor of pediatric rehabilitation research, there is a need to evaluate the degree to which an intervention is conducted as planned (i.e., fidelity). Generic fidelity measures evaluate more than one intervention and often include nonspecific attributes of the therapy process common to both interventions. The objective of this study…

Toward an Integrated Design, Inspection and Redundancy Research Program.

DTIC Science & Technology

1984-01-01

William Creelman William H. Silcox National Marine Service Standard Oil Company of California St. Louis, Missouri San Francisco, California .-- N...develop physical models and generic tools for analyzing the effects of redundancy, reserve strength, and residual strength on the system behavior of marine...probabilistic analyses to be applicable to real-world problems, this program needs to provide - the deterministic physical models and generic tools upon

Exact solution of the XXX Gaudin model with generic open boundaries

NASA Astrophysics Data System (ADS)

Hao, Kun; Cao, Junpeng; Yang, Tao; Yang, Wen-Li

2015-03-01

The XXX Gaudin model with generic integrable open boundaries specified by the most general non-diagonal reflecting matrices is studied. Besides the inhomogeneous parameters, the associated Gaudin operators have six free parameters which break the U(1) -symmetry. With the help of the off-diagonal Bethe ansatz, we successfully obtained the eigenvalues of these Gaudin operators and the corresponding Bethe ansatz equations.

Naturalness of Electroweak Symmetry Breaking while Waiting for the LHC

NASA Astrophysics Data System (ADS)

Espinosa, J. R.

2007-06-01

After revisiting the hierarchy problem of the Standard Model and its implications for the scale of New Physics, I consider the finetuning problem of electroweak symmetry breaking in several scenarios beyond the Standard Model: SUSY, Little Higgs and "improved naturalness" models. The main conclusions are that: New Physics should appear on the reach of the LHC; some SUSY models can solve the hierarchy problem with acceptable residual tuning; Little Higgs models generically suffer from large tunings, many times hidden; and, finally, that "improved naturalness" models do not generically improve the naturalness of the SM.

How should we build a generic open-source water management simulator?

NASA Astrophysics Data System (ADS)

Khadem, M.; Meier, P.; Rheinheimer, D. E.; Padula, S.; Matrosov, E.; Selby, P. D.; Knox, S.; Harou, J. J.

2014-12-01

Increasing water needs for agriculture, industry and cities mean effective and flexible water resource system management tools will remain in high demand. Currently many regions or countries use simulators that have been adapted over time to their unique system properties and water management rules and realities. Most regions operate with a preferred short-list of water management and planning decision support systems. Is there scope for a simulator, shared within the water management community, that could be adapted to different contexts, integrate community contributions, and connect to generic data and model management software? What role could open-source play in such a project? How could a genericuser-interface and data/model management software sustainably be attached to this model or suite of models? Finally, how could such a system effectively leverage existing model formulations, modeling technologies and software? These questions are addressed by the initial work presented here. We introduce a generic water resource simulation formulation that enables and integrates both rule-based and optimization driven technologies. We suggest how it could be linked to other sub-models allowing for detailed agent-based simulation of water management behaviours. An early formulation is applied as an example to the Thames water resource system in the UK. The model uses centralised optimisation to calculate allocations but allows for rule-based operations as well in an effort to represent observed behaviours and rules with fidelity. The model is linked through import/export commands to a generic network model platform named Hydra. Benefits and limitations of the approach are discussed and planned work and potential use cases are outlined.

Urban-Rural Disparity of Generics Prescription in Taiwan: The Example of Dihydropyridine Derivatives

PubMed Central

Chiang, Shu-Chiung; Chou, Li-Fang

2014-01-01

The aim of the current study was to investigate the urban-rural disparity of prescribing generics, which were usually cheaper than branded drugs, within the universal health insurance system in Taiwan. Data sources were the cohort datasets of National Health Insurance Research Database with claims data in 2010. The generic prescribing ratios of dihydropyridine (DHP) derivatives (the proportion of DHP prescribed as generics to all prescribed DHP) of medical facilities were examined against the urbanization levels of the clinic location. Among the total 21,606,914 defined daily doses of DHP, 35.7% belonged to generics. The aggregate generic prescribing ratio rose from 6.7% at academic medical centers to 15.3% at regional hospitals, 29.4% at community hospital, and 66.1% at physician clinics. Among physician clinics, the generic prescribing ratio in urban areas was 63.9 ± 41.0% (mean ± standard deviation), lower than that in suburban (69.6 ± 38.7%) and in rural (74.1% ± 35.3%). After adjusting the related factors in the linear regression model, generic prescribing ratios of suburban and rural clinics were significantly higher than those of urban clinics (β = 0.043 and 0.077; P = 0.024 and 0.008, resp.). The generic prescribing ratio of the most popular antihypertensive agents at a clinic was reversely associated with the urbanization level. PMID:24683364

Development of an Integrated Nonlinear Aeroservoelastic Flight Dynamic Model of the NASA Generic Transport Model

NASA Technical Reports Server (NTRS)

Nguyen, Nhan; Ting, Eric

2018-01-01

This paper describes a recent development of an integrated fully coupled aeroservoelastic flight dynamic model of the NASA Generic Transport Model (GTM). The integrated model couples nonlinear flight dynamics to a nonlinear aeroelastic model of the GTM. The nonlinearity includes the coupling of the rigid-body aircraft states in the partial derivatives of the aeroelastic angle of attack. Aeroservoelastic modeling of the control surfaces which are modeled by the Variable Camber Continuous Trailing Edge Flap is also conducted. The R.T. Jones' method is implemented to approximate unsteady aerodynamics. Simulations of the GTM are conducted with simulated continuous and discrete gust loads..

Temporal and Location Based RFID Event Data Management and Processing

NASA Astrophysics Data System (ADS)

Wang, Fusheng; Liu, Peiya

Advance of sensor and RFID technology provides significant new power for humans to sense, understand and manage the world. RFID provides fast data collection with precise identification of objects with unique IDs without line of sight, thus it can be used for identifying, locating, tracking and monitoring physical objects. Despite these benefits, RFID poses many challenges for data processing and management. RFID data are temporal and history oriented, multi-dimensional, and carrying implicit semantics. Moreover, RFID applications are heterogeneous. RFID data management or data warehouse systems need to support generic and expressive data modeling for tracking and monitoring physical objects, and provide automated data interpretation and processing. We develop a powerful temporal and location oriented data model for modeling and queryingRFID data, and a declarative event and rule based framework for automated complex RFID event processing. The approach is general and can be easily adapted for different RFID-enabled applications, thus significantly reduces the cost of RFID data integration.

An approach to knowledge engineering to support knowledge-based simulation of payload ground processing at the Kennedy Space Center

NASA Technical Reports Server (NTRS)

Mcmanus, Shawn; Mcdaniel, Michael

1989-01-01

Planning for processing payloads was always difficult and time-consuming. With the advent of Space Station Freedom and its capability to support a myriad of complex payloads, the planning to support this ground processing maze involves thousands of man-hours of often tedious data manipulation. To provide the capability to analyze various processing schedules, an object oriented knowledge-based simulation environment called the Advanced Generic Accomodations Planning Environment (AGAPE) is being developed. Having nearly completed the baseline system, the emphasis in this paper is directed toward rule definition and its relation to model development and simulation. The focus is specifically on the methodologies implemented during knowledge acquisition, analysis, and representation within the AGAPE rule structure. A model is provided to illustrate the concepts presented. The approach demonstrates a framework for AGAPE rule development to assist expert system development.

A framework for service enterprise workflow simulation with multi-agents cooperation

NASA Astrophysics Data System (ADS)

Tan, Wenan; Xu, Wei; Yang, Fujun; Xu, Lida; Jiang, Chuanqun

2013-11-01

Process dynamic modelling for service business is the key technique for Service-Oriented information systems and service business management, and the workflow model of business processes is the core part of service systems. Service business workflow simulation is the prevalent approach to be used for analysis of service business process dynamically. Generic method for service business workflow simulation is based on the discrete event queuing theory, which is lack of flexibility and scalability. In this paper, we propose a service workflow-oriented framework for the process simulation of service businesses using multi-agent cooperation to address the above issues. Social rationality of agent is introduced into the proposed framework. Adopting rationality as one social factor for decision-making strategies, a flexible scheduling for activity instances has been implemented. A system prototype has been developed to validate the proposed simulation framework through a business case study.

Scaling Limits and Generic Bounds for Exploration Processes

NASA Astrophysics Data System (ADS)

Bermolen, Paola; Jonckheere, Matthieu; Sanders, Jaron

2017-12-01

We consider exploration algorithms of the random sequential adsorption type both for homogeneous random graphs and random geometric graphs based on spatial Poisson processes. At each step, a vertex of the graph becomes active and its neighboring nodes become blocked. Given an initial number of vertices N growing to infinity, we study statistical properties of the proportion of explored (active or blocked) nodes in time using scaling limits. We obtain exact limits for homogeneous graphs and prove an explicit central limit theorem for the final proportion of active nodes, known as the jamming constant, through a diffusion approximation for the exploration process which can be described as a unidimensional process. We then focus on bounding the trajectories of such exploration processes on random geometric graphs, i.e., random sequential adsorption. As opposed to exploration processes on homogeneous random graphs, these do not allow for such a dimensional reduction. Instead we derive a fundamental relationship between the number of explored nodes and the discovered volume in the spatial process, and we obtain generic bounds for the fluid limit and jamming constant: bounds that are independent of the dimension of space and the detailed shape of the volume associated to the discovered node. Lastly, using coupling techinques, we give trajectorial interpretations of the generic bounds.

Virtual milk for modelling and simulation of dairy processes.

PubMed

Munir, M T; Zhang, Y; Yu, W; Wilson, D I; Young, B R

2016-05-01

The modeling of dairy processing using a generic process simulator suffers from shortcomings, given that many simulators do not contain milk components in their component libraries. Recently, pseudo-milk components for a commercial process simulator were proposed for simulation and the current work extends this pseudo-milk concept by studying the effect of both total milk solids and temperature on key physical properties such as thermal conductivity, density, viscosity, and heat capacity. This paper also uses expanded fluid and power law models to predict milk viscosity over the temperature range from 4 to 75°C and develops a succinct regressed model for heat capacity as a function of temperature and fat composition. The pseudo-milk was validated by comparing the simulated and actual values of the physical properties of milk. The milk thermal conductivity, density, viscosity, and heat capacity showed differences of less than 2, 4, 3, and 1.5%, respectively, between the simulated results and actual values. This work extends the capabilities of the previously proposed pseudo-milk and of a process simulator to model dairy processes, processing different types of milk (e.g., whole milk, skim milk, and concentrated milk) with different intrinsic compositions, and to predict correct material and energy balances for dairy processes. Copyright © 2016 American Dairy Science Association. Published by Elsevier Inc. All rights reserved.

An Integrated Approach to Conversion, Verification, Validation and Integrity of AFRL Generic Engine Model and Simulation (Postprint)

DTIC Science & Technology

2007-02-01

and Astronautics 11 PS3C W3 P3 T3 FAR3 Ps3 W41 P41 T41 FAR41 Ps41 W4 P4 T4 FAR4 Ps4 7 NozFlow 6 Flow45 5 Flow44 4 Flow41 3 Flow4 2 Flow3 1 N2Bal... Motivation for Modeling and Simulation Work The Augmented Generic Engine Model (AGEM) Model Verification and Validation (V&V) Assessment of AGEM V&V

Analysis of Wind Turbine Simulation Models: Assessment of Simplified versus Complete Methodologies: Preprint

DOE Office of Scientific and Technical Information (OSTI.GOV)

Honrubia-Escribano, A.; Jimenez-Buendia, F.; Molina-Garcia, A.

This paper presents the current status of simplified wind turbine models used for power system stability analysis. This work is based on the ongoing work being developed in IEC 61400-27. This international standard, for which a technical committee was convened in October 2009, is focused on defining generic (also known as simplified) simulation models for both wind turbines and wind power plants. The results of the paper provide an improved understanding of the usability of generic models to conduct power system simulations.

Changes in the cardiac rehabilitation workflow process needed for the implementation of a self-management system.

PubMed

Wiggers, Anne-Marieke; Vosbergen, Sandra; Kraaijenhagen, Roderik; Jaspers, Monique; Peek, Niels

2013-01-01

E-health interventions are of a growing importance for self-management of chronic conditions. This study aimed to describe the process adaptions that are needed in cardiac rehabilitation (CR) to implement a self-management system, called MyCARDSS. We created a generic workflow model based on interviews and observations at three CR clinics. Subsequently, a workflow model of the ideal situation after implementation of MyCARDSS was created. We found that the implementation will increase the complexity of existing working procedures because 1) not all patients will use MyCARDSS, 2) there is a transfer of tasks and responsibilities from professionals to patients, and 3) information in MyCARDSS needs to be synchronized with the EPR system for professionals.

Development and testing of controller performance evaluation methodology for multi-input/multi-output digital control systems

NASA Technical Reports Server (NTRS)

Pototzky, Anthony; Wieseman, Carol; Hoadley, Sherwood Tiffany; Mukhopadhyay, Vivek

1991-01-01

Described here is the development and implementation of on-line, near real time controller performance evaluation (CPE) methods capability. Briefly discussed are the structure of data flow, the signal processing methods used to process the data, and the software developed to generate the transfer functions. This methodology is generic in nature and can be used in any type of multi-input/multi-output (MIMO) digital controller application, including digital flight control systems, digitally controlled spacecraft structures, and actively controlled wind tunnel models. Results of applying the CPE methodology to evaluate (in near real time) MIMO digital flutter suppression systems being tested on the Rockwell Active Flexible Wing (AFW) wind tunnel model are presented to demonstrate the CPE capability.

Performance of four turbulence closure models implemented using a generic length scale method

USGS Publications Warehouse

Warner, J.C.; Sherwood, C.R.; Arango, H.G.; Signell, R.P.

2005-01-01

A two-equation turbulence model (one equation for turbulence kinetic energy and a second for a generic turbulence length-scale quantity) proposed by Umlauf and Burchard [J. Marine Research 61 (2003) 235] is implemented in a three-dimensional oceanographic model (Regional Oceanographic Modeling System; ROMS v2.0). These two equations, along with several stability functions, can represent many popular turbulence closures, including the k-kl (Mellor-Yamada Level 2.5), k-??, and k-?? schemes. The implementation adds flexibility to the model by providing an unprecedented range of turbulence closure selections in a single 3D oceanographic model and allows comparison and evaluation of turbulence models in an otherwise identical numerical environment. This also allows evaluation of the effect of turbulence models on other processes such as suspended-sediment distribution or ecological processes. Performance of the turbulence models and sediment-transport schemes is investigated with three test cases for (1) steady barotropic flow in a rectangular channel, (2) wind-induced surface mixed-layer deepening in a stratified fluid, and (3) oscillatory stratified pressure-gradient driven flow (estuarine circulation) in a rectangular channel. Results from k-??, k-??, and gen (a new closure proposed by Umlauf and Burchard [J. Marine Research 61 (2003) 235]) are very similar for these cases, but the k-kl closure results depend on a wall-proximity function that must be chosen to suit the flow. Greater variations appear in simulations of suspended-sediment concentrations than in salinity simulations because the transport of suspended-sediment amplifies minor variations in the methods. The amplification is caused by the added physics of a vertical settling rate, bottom stress dependent resuspension, and diffusive transport of sediment in regions of well mixed salt and temperature. Despite the amplified sensitivity of sediment to turbulence models in the estuary test case, the four closures investigated here all generated estuarine turbidity maxima that were similar in their shape, location, and concentrations. 

Phase I Experimental Testing of a Generic Submarine Model in the DSTO Low Speed Wind Tunnel

DTIC Science & Technology

2012-07-01

used during the tests , along with the test methodology . A sub-set of the data gathered is also presented and briefly discussed. Overall, the force...total pressure probe when positioned close to the model. 4. Results Selected results from the testing of the generic submarine model in the...Appendix B summaries the test conditions. 4.3.1 Smoke Generator and Probe An Aerotech smoke generator and probe were used for visualisation of

Small pixel cross-talk MTF and its impact on MWIR sensor performance

NASA Astrophysics Data System (ADS)

Goss, Tristan M.; Willers, Cornelius J.

2017-05-01

As pixel sizes reduce in the development of modern High Definition (HD) Mid Wave Infrared (MWIR) detectors the interpixel cross-talk becomes increasingly difficult to regulate. The diffusion lengths required to achieve the quantum efficiency and sensitivity of MWIR detectors are typically longer than the pixel pitch dimension, and the probability of inter-pixel cross-talk increases as the pixel pitch/diffusion length fraction decreases. Inter-pixel cross-talk is most conveniently quantified by the focal plane array sampling Modulation Transfer Function (MTF). Cross-talk MTF will reduce the ideal sinc square pixel MTF that is commonly used when modelling sensor performance. However, cross-talk MTF data is not always readily available from detector suppliers, and since the origins of inter-pixel cross-talk are uniquely device and manufacturing process specific, no generic MTF models appear to satisfy the needs of the sensor designers and analysts. In this paper cross-talk MTF data has been collected from recent publications and the development for a generic cross-talk MTF model to fit this data is investigated. The resulting cross-talk MTF model is then included in a MWIR sensor model and the impact on sensor performance is evaluated in terms of the National Imagery Interoperability Rating Scale's (NIIRS) General Image Quality Equation (GIQE) metric for a range of fnumber/ detector pitch Fλ/d configurations and operating environments. By applying non-linear boost transfer functions in the signal processing chain, the contrast losses due to cross-talk may be compensated for. Boost transfer functions, however, also reduce the signal to noise ratio of the sensor. In this paper boost function limits are investigated and included in the sensor performance assessments.

Regenerative life support system research

NASA Technical Reports Server (NTRS)

1988-01-01

Sections on modeling, experimental activities during the grant period, and topics under consideration for the future are contained. The sessions contain discussions of: four concurrent modeling approaches that were being integrated near the end of the period (knowledge-based modeling support infrastructure and data base management, object-oriented steady state simulations for three concepts, steady state mass-balance engineering tradeoff studies, and object-oriented time-step, quasidynamic simulations of generic concepts); interdisciplinary research activities, beginning with a discussion of RECON lab development and use, and followed with discussions of waste processing research, algae studies and subsystem modeling, low pressure growth testing of plants, subsystem modeling of plants, control of plant growth using lighting and CO2 supply as variables, search for and development of lunar soil simulants, preliminary design parameters for a lunar base life support system, and research considerations for food processing in space; and appendix materials, including a discussion of the CELSS Conference, detailed analytical equations for mass-balance modeling, plant modeling equations, and parametric data on existing life support systems for use in modeling.

Factors influencing consumer purchasing patterns of generic versus brand name over-the-counter drugs.

PubMed

Kohli, Erol; Buller, Allison

2013-02-01

US consumers spend more than $20 billion/year on over-the-counter (OTC) drugs. Although generic and brand name OTC drugs share the same active ingredients and undergo the same rigorous Food and Drug Administration approval process, brand name formulations continue to lead the OTC drug market with a higher market share. There is a limited amount of publicly available information regarding consumer perceptions and awareness about generic and brand name OTC drugs. The main objective of this research was to understand what factors influence US consumers to purchase generic versus brand name OTC drugs. The researchers used a 20-question, self-administered, multiple-choice survey to collect data on the factors influencing consumers' preferences for generic versus brand name OTC drugs. Results revealed that the single most influential factor for participants when purchasing OTC drugs was lower cost. Although economic factors play an important role in influencing consumers to choose generic formulations, a variety of other factors including advertisements, duration of the OTC effectiveness, severity of sickness, preferable form of OTC medication, safety of the OTC, relief of multiple symptoms, and preferred company will persuade others to pay more for brand name drugs. Ultimately, increased awareness and use of generic OTC drugs may result in substantial cost savings for consumers.

VBA: A Probabilistic Treatment of Nonlinear Models for Neurobiological and Behavioural Data

PubMed Central

Daunizeau, Jean; Adam, Vincent; Rigoux, Lionel

2014-01-01

This work is in line with an on-going effort tending toward a computational (quantitative and refutable) understanding of human neuro-cognitive processes. Many sophisticated models for behavioural and neurobiological data have flourished during the past decade. Most of these models are partly unspecified (i.e. they have unknown parameters) and nonlinear. This makes them difficult to peer with a formal statistical data analysis framework. In turn, this compromises the reproducibility of model-based empirical studies. This work exposes a software toolbox that provides generic, efficient and robust probabilistic solutions to the three problems of model-based analysis of empirical data: (i) data simulation, (ii) parameter estimation/model selection, and (iii) experimental design optimization. PMID:24465198

An exploratory survey of methods used to develop measures of performance

NASA Astrophysics Data System (ADS)

Hamner, Kenneth L.; Lafleur, Charles A.

1993-09-01

Nonmanufacturing organizations are being challenged to provide high-quality products and services to their customers, with an emphasis on continuous process improvement. Measures of performance, referred to as metrics, can be used to foster process improvement. The application of performance measurement to nonmanufacturing processes can be very difficult. This research explored methods used to develop metrics in nonmanufacturing organizations. Several methods were formally defined in the literature, and the researchers used a two-step screening process to determine the OMB Generic Method was most likely to produce high-quality metrics. The OMB Generic Method was then used to develop metrics. A few other metric development methods were found in use at nonmanufacturing organizations. The researchers interviewed participants in metric development efforts to determine their satisfaction and to have them identify the strengths and weaknesses of, and recommended improvements to, the metric development methods used. Analysis of participants' responses allowed the researchers to identify the key components of a sound metrics development method. Those components were incorporated into a proposed metric development method that was based on the OMB Generic Method, and should be more likely to produce high-quality metrics that will result in continuous process improvement.

Safety assurance of non-deterministic flight controllers in aircraft applications

NASA Astrophysics Data System (ADS)

Noriega, Alfonso

Loss of control is a serious problem in aviation that primarily affects General Aviation. Technological advancements can help mitigate the problem, but the FAA certification process makes certain solutions economically unfeasible. This investigation presents the design of a generic adaptive autopilot that could potentially lead to a single certification for use in several makes and models of aircraft. The autopilot consists of a conventional controller connected in series with a robust direct adaptive model reference controller. In this architecture, the conventional controller is tuned once to provide outer-loop guidance and navigation to a reference model. The adaptive controller makes unknown aircraft behave like the reference model, allowing the conventional controller to successfully provide navigation without the need for retuning. A strong theoretical foundation is presented as an argument for the safety and stability of the controller. The stability proof of direct adaptive controllers require that the plant being controlled has no unstable transmission zeros and has a nonzero high frequency gain. Because most conventional aircraft do not readily meet these requirements, a process known as sensor blending was used. Sensor blending consists of using a linear combination of the plant's outputs that has no unstable transmission zeros and has a nonzero high frequency gain to drive the adaptive controller. Although this method does not present a problem for regulators, it can lead to a steady state error in tracking applications. The sensor blending theory was expanded to take advantage of the system's dynamics to allow for zero steady state error tracking. This method does not need knowledge of the specific system's dynamics, but instead uses the structure of the A and B matrices to perform the blending for the general case. The generic adaptive autopilot was tested in two high-fidelity nonlinear simulators of two typical General Aviation aircraft. The results show that the autopilot was able to adapt appropriately to the different aircraft and was able to perform three-dimensional navigation and an ILS approach, without any modification to the controller. The autopilot was tested in moderate atmospheric turbulence, using consumer-grade sensors and actuators currently available in General Aviation aircraft. The generic adaptive autopilot was shown to be robust to atmospheric turbulence and sensor and actuator random noise. In both aircraft simulators, the autopilot adapted successfully to changes in airspeed, altitude, and configuration. This investigation proves the feasibility of a generic autopilot using direct adaptive controller. The autopilot does not need a priori information of the specific aircraft's dynamics to maintain its safety and stability arguments. Real-time parameter estimation of the aircraft dynamics are not needed. Recommendations for future work are provided.

Assessment of wear dependence parameters in complex model of cutting tool wear

NASA Astrophysics Data System (ADS)

Antsev, A. V.; Pasko, N. I.; Antseva, N. V.

2018-03-01

This paper addresses wear dependence of the generic efficient life period of cutting tools taken as an aggregate of the law of tool wear rate distribution and dependence of parameters of this law's on the cutting mode, factoring in the random factor as exemplified by the complex model of wear. The complex model of wear takes into account the variance of cutting properties within one batch of tools, variance in machinability within one batch of workpieces, and the stochastic nature of the wear process itself. A technique of assessment of wear dependence parameters in a complex model of cutting tool wear is provided. The technique is supported by a numerical example.

Satellite servicing mission preliminary cost estimation model

NASA Technical Reports Server (NTRS)

1987-01-01

The cost model presented is a preliminary methodology for determining a rough order-of-magnitude cost for implementing a satellite servicing mission. Mission implementation, in this context, encompassess all activities associated with mission design and planning, including both flight and ground crew training and systems integration (payload processing) of servicing hardward with the Shuttle. A basic assumption made in developing this cost model is that a generic set of servicing hardware was developed and flight tested, is inventoried, and is maintained by NASA. This implies that all hardware physical and functional interfaces are well known and therefore recurring CITE testing is not required. The development of the cost model algorithms and examples of their use are discussed.

Geomechanical/Geochemical Modeling Studies Conducted within theInternational DECOVALEX Project

DOE Office of Scientific and Technical Information (OSTI.GOV)

Birkholzer, J.T.; Rutqvist, J.; Sonnenthal, E.L.

2005-10-19

The DECOVALEX project is an international cooperative project initiated by SKI, the Swedish Nuclear Power Inspectorate, with participation of about 10 international organizations. The general goal of this project is to encourage multidisciplinary interactive and cooperative research on modeling coupled thermo-hydro-mechanical-chemical (THMC) processes in geologic formations in support of the performance assessment for underground storage of radioactive waste. One of the research tasks, initiated in 2004 by the U.S. Department of Energy (DOE), addresses the long-term impact of geomechanical and geochemical processes on the flow conditions near waste emplacement tunnels. Within this task, four international research teams conduct predictive analysismore » of the coupled processes in two generic repositories, using multiple approaches and different computer codes. Below, we give an overview of the research task and report its current status.« less

Geomechanical/ Geochemical Modeling Studies onducted Within the International DECOVALEX Project

DOE Office of Scientific and Technical Information (OSTI.GOV)

J.T. Birkholzer; J. Rutqvist; E.L. Sonnenthal

2006-02-01

The DECOVALEX project is an international cooperative project initiated by SKI, the Swedish Nuclear Power Inspectorate, with participation of about 10 international organizations. The general goal of this project is to encourage multidisciplinary interactive and cooperative research on modeling coupled thermo-hydro-mechanical-chemical (THMC) processes in geologic formations in support of the performance assessment for underground storage of radioactive waste. One of the research tasks, initiated in 2004 by the U.S. Department of Energy (DOE), addresses the long-term impact of geomechanical and geochemical processes on the flow conditions near waste emplacement tunnels. Within this task, four international research teams conduct predictive analysismore » of the coupled processes in two generic repositories, using multiple approaches and different computer codes. Below, we give an overview of the research task and report its current status.« less

The development of an advanced generic solar dynamic heat receiver thermal model

NASA Technical Reports Server (NTRS)

Wu, Y. C.; Roschke, E. J.; Kohout, L.

1988-01-01

An advanced generic solar dynamic heat receiver thermal model under development which can analyze both orbital transient and orbital average conditions is discussed. This model can be used to study advanced receiver concepts, evaluate receiver concepts under development, analyze receiver thermal characteristics under various operational conditions, and evaluate solar dynamic system thermal performances in various orbit conditions. The model and the basic considerations that led to its creation are described, and results based on a set of baseline orbit, configuration, and operational conditions are presented to demonstrate the working of the receiver model.

Key drivers for market penetration of biosimilars in Europe.

PubMed

Rémuzat, Cécile; Dorey, Julie; Cristeau, Olivier; Ionescu, Dan; Radière, Guerric; Toumi, Mondher

2017-01-01

Background & Objectives : Potential drivers and barriers of biosimilar uptake were mainly analysed through qualitative approaches. The study objective was to conduct a quantitative analysis and identify drivers of biosimilar uptake of all available biosimilars in the European Union (EU). Methods : A three-step process was established to identify key drivers for the uptake of biosimilars in the top 10 EU member states (MS) pharmaceutical markets (Belgium, France, Germany, Greece, Hungary, Italy, Poland, Spain, Sweden, and the UK): (1) literature review to identify incentive policies in place to enhance biosimilars adoption; (2) assessment of biosimilar market dynamics based on database analysis; (3) regression model analysis on price using the following explicative variables: incentive policies; price difference between the biosimilar and the originator product; distribution channel; generic uptake and generic price cut; pharmaceutical expenditure per capita; and market competition. Results : At the study cut-off date, 20 biosimilars were available on the market. Incentive policies applied to biosimilars were found to be heterogeneous across countries, and uptakes of biosimilars were also very heterogeneous between different therapeutic classes and countries. Results from the model demonstrated that incentive policies and the date of first biosimilar market entry were correlated to biosimilar uptake. Pharmaceutical expenditure per capita and the highest generic uptake were inversely correlated with biosimilar uptake. Average generic price discount over originator and the number of biosimilars showed a trend toward statistical significance for correlation with biosimilar uptake, but did not reach the significance threshold. Biosimilar price discount over original biologic price, the number of analogues, and the distribution channel were not correlated with the biosimilar uptake. Conclusions : Understanding drivers of biosimilar uptake becomes a critical issue to inform policy decision-makers. This study showed that incentive policies to enhance uptake remain an important driver of biosimilar penetration, while biosimilar price discounts have no impact. Future research is warranted when the biosimilar market gains maturity.

Key drivers for market penetration of biosimilars in Europe

PubMed Central

Rémuzat, Cécile; Dorey, Julie; Cristeau, Olivier; Ionescu, Dan; Radière, Guerric; Toumi, Mondher

2017-01-01

ABSTRACT Background & Objectives: Potential drivers and barriers of biosimilar uptake were mainly analysed through qualitative approaches. The study objective was to conduct a quantitative analysis and identify drivers of biosimilar uptake of all available biosimilars in the European Union (EU). Methods: A three-step process was established to identify key drivers for the uptake of biosimilars in the top 10 EU member states (MS) pharmaceutical markets (Belgium, France, Germany, Greece, Hungary, Italy, Poland, Spain, Sweden, and the UK): (1) literature review to identify incentive policies in place to enhance biosimilars adoption; (2) assessment of biosimilar market dynamics based on database analysis; (3) regression model analysis on price using the following explicative variables: incentive policies; price difference between the biosimilar and the originator product; distribution channel; generic uptake and generic price cut; pharmaceutical expenditure per capita; and market competition. Results: At the study cut-off date, 20 biosimilars were available on the market. Incentive policies applied to biosimilars were found to be heterogeneous across countries, and uptakes of biosimilars were also very heterogeneous between different therapeutic classes and countries. Results from the model demonstrated that incentive policies and the date of first biosimilar market entry were correlated to biosimilar uptake. Pharmaceutical expenditure per capita and the highest generic uptake were inversely correlated with biosimilar uptake. Average generic price discount over originator and the number of biosimilars showed a trend toward statistical significance for correlation with biosimilar uptake, but did not reach the significance threshold. Biosimilar price discount over original biologic price, the number of analogues, and the distribution channel were not correlated with the biosimilar uptake. Conclusions: Understanding drivers of biosimilar uptake becomes a critical issue to inform policy decision-makers. This study showed that incentive policies to enhance uptake remain an important driver of biosimilar penetration, while biosimilar price discounts have no impact. Future research is warranted when the biosimilar market gains maturity. PMID:28265349

Retailing policies for generic medicines.

PubMed

Narciso, Susana

2005-06-01

As there is general disagreement about the way generic medicines should be commercialized, two retailing policies are analyzed, taking into account their effects on the welfare of patients, government, pharmacies and physicians. In the first policy scenario, pharmacies are allowed to substitute generic medicines for branded ones, while in the second, substitution is forbidden. In both cases a pharmacies association is allowed to have a share in the production of generic medicines. The model predicts that under some conditions patients may prefer substitution by pharmacies but when doctors' decisions are binding, they are never "excessively bad". However, the policy choice belongs to the government, which prefers to allow for substitution more often than patients would like.

Generic Software Architecture for Prognostics (GSAP) User Guide

NASA Technical Reports Server (NTRS)

Teubert, Christopher Allen; Daigle, Matthew John; Watkins, Jason; Sankararaman, Shankar; Goebel, Kai

2016-01-01

The Generic Software Architecture for Prognostics (GSAP) is a framework for applying prognostics. It makes applying prognostics easier by implementing many of the common elements across prognostic applications. The standard interface enables reuse of prognostic algorithms and models across systems using the GSAP framework.

Impact of price deregulation policy on the affordability of essential medicines for women's health: a panel data analysis.

PubMed

Liu, Junjie; Wang, Liming; Liu, Chenxi; Zhang, Xinping

2017-12-01

A new policy which required deregulation on prices of off-patent medicines for women's health during procurement was introduced in China in September 2015. The current study examines this policy's impact on the affordability of essential medicines for women's health. Based on product-level panel data, a fixed effect regression model is employed by using procurement records from Hubei Centralist Tender for Drug Purchase platform. In the model, Affordability was measured with prices. The Competition consists of two parts: generic competition and therapeutic class competition which are measured with generic competitors and therapeutic substitutes. Instrument variable is used to deal with endogeneity. The policy helped control prices of essential medicines for women's health. Generic competition helped control prices, however, therapeutic class competition caused higher prices. The new policy helped enhance the affordability of essential medicines for women's health as expected, which provides empirical evidence on price deregulation. Besides, generic competition is important in price control despite strict regulatory system in China.

A generic strategy for pharmacological caging of growth factors for tissue engineering.

PubMed

Karlsson, Maria; Lienemann, Philipp S; Sprossmann, Natallia; Heilmann, Katharina; Brummer, Tilman; Lutolf, Matthias P; Ehrbar, Martin; Weber, Wilfried

2013-07-07

The caging of small molecules has revolutionized biological research by providing a means to regulate a wide range of processes. Here we report on a generic pharmacological method to cage proteins in a similar fashion. The present approach is of value in both fundamental and applied research, e.g. in tissue engineering.

40 CFR 721.3025 - Fatty acids C12-18, C18 unsaturated, C12-18 alkyl esters (generic).

Code of Federal Regulations, 2010 CFR

2010-07-01

..., C12-18 alkyl esters (generic). 721.3025 Section 721.3025 Protection of Environment ENVIRONMENTAL... communication program. A significant new use of these substances is any manner or method of manufacture, import, or processing associated with any use of these substances without providing risk notification as...

Can the Integration of a PLE in an E-Portfolio Platform Improve Generic Competences?

ERIC Educational Resources Information Center

Galván-Fernández, Cristina; Rubio-Hurtado, María José; Martínez-Olmo, Francesc; Rodríguez-Illera, José Luis

2017-01-01

The study analyzes the improvement in generic competences through e-portfolio/PLE platform and didactic planning. The new version of the platform, Digital Folder, contains utilities for students and teachers and some PLE components that help the learning process through e-portfolios. Didactic planning is compared for students from the University…

Detection and 3d Modelling of Vehicles from Terrestrial Stereo Image Pairs

NASA Astrophysics Data System (ADS)

Coenen, M.; Rottensteiner, F.; Heipke, C.

2017-05-01

The detection and pose estimation of vehicles plays an important role for automated and autonomous moving objects e.g. in autonomous driving environments. We tackle that problem on the basis of street level stereo images, obtained from a moving vehicle. Processing every stereo pair individually, our approach is divided into two subsequent steps: the vehicle detection and the modelling step. For the detection, we make use of the 3D stereo information and incorporate geometric assumptions on vehicle inherent properties in a firstly applied generic 3D object detection. By combining our generic detection approach with a state of the art vehicle detector, we are able to achieve satisfying detection results with values for completeness and correctness up to more than 86%. By fitting an object specific vehicle model into the vehicle detections, we are able to reconstruct the vehicles in 3D and to derive pose estimations as well as shape parameters for each vehicle. To deal with the intra-class variability of vehicles, we make use of a deformable 3D active shape model learned from 3D CAD vehicle data in our model fitting approach. While we achieve encouraging values up to 67.2% for correct position estimations, we are facing larger problems concerning the orientation estimation. The evaluation is done by using the object detection and orientation estimation benchmark of the KITTI dataset (Geiger et al., 2012).

Learning Outcomes: Common Framework--Different Approaches to Evaluation Learning Outcomes in the Nordic Countries. Joint Nordic Project 2007-2008, by the Nordic Quality Assurance Network for Higher Education (NOQA). ENQA Occasional Papers 15

ERIC Educational Resources Information Center

Gallavara, G.; Hreinsson, E.; Kajaste, M.; Lindesjoo, E.; Solvhjelm, C.; Sorskar, A. K.; Zadeh, M. Sedigh

2008-01-01

The adoption of the Bologna process has influenced the development of quality assurance across many countries in Europe. In particular, the implementation of the Framework for Qualifications in the European Higher Education Area has stimulated discussion about the three cycle model, which uses generic descriptors for each cycle based on learning…

Generic drug prices and policy in Australia: room for improvement? a comparative analysis with England.

PubMed

Mansfield, Sarah J

2014-02-01

To assess the degree to which reimbursement prices in Australia and England differ for a range of generic drugs, and to analyse the supply- and demand-side factors that may contribute to these differences. Australian and English reimbursement prices were compared for a range of generic drugs using pricing information obtained from government websites. Next, a literature review was conducted to identify supply- and demand-side factors that could affect generic prices in Australia and England. Various search topics were identified addressing potential supply-side (e.g. market approval, intellectual property protection of patented drugs, generic pricing policy, market size, generic supply chain and discounting practices) and demand-side (consumers, prescribers and pharmacists) factors. Related terms were searched in academic databases, official government websites, national statistical databases and internet search engines. Analysis of drug reimbursement prices for 15 generic molecules (representing 45 different drug presentations) demonstrated that Australian prices were on average over 7-fold higher than in England. Significant supply-side differences included aspects of pricing policy, the relative size of the generics markets and the use of clawback policies. Major differences in demand-side policies related to generic prescribing, pharmacist substitution and consumer incentives. Despite recent reforms, the Australian Government continues to pay higher prices than its English counterpart for many generic medications. The results suggest that particular policy areas may benefit from review in Australia, including the length of the price-setting process, the frequency of subsequent price adjustments, the extent of price competition between originators and generics, medical professionals' knowledge about generic medicines and incentives for generic prescribing. WHAT IS KNOWN ABOUT THE TOPIC? Prices of generic drugs have been the subject of much scrutiny over recent years. From 2005 to 2010 the Australian Government responded to observations that Pharmaceutical Benefits Scheme prices for many generics were higher than in numerous comparable countries by instituting several reforms aimed at reducing the prices of generics. Despite this, several studies have demonstrated that prices for generic statins (one class of cholesterol-lowering drug) are higher in Australia compared with England and many other developed countries, and prices of numerous other generics remain higher than in the USA and New Zealand. Recently there has been increasing interest in why these differences exist. WHAT DOES THIS PAPER ADD? By including a much larger range of commonly used and costly generic drugs, this paper builds significantly on the limited previous investigations of generic drug prices in Australia and England. Additionally, this is the first comprehensive investigation of multiple supply- and, in particular, demand-side factors that may explain any price differences between these countries. WHAT ARE THE IMPLICATIONS FOR PRACTITIONERS? Practitioners may contribute to the higher prices of generic medications in Australia compared with England through relatively low rates of generic prescribing. There are also significant implications for health policy makers, as this paper demonstrates that if Australia achieved the same prices as England for many generic drugs there could be substantial savings for the Pharmaceutical Benefits Scheme.

BioASF: a framework for automatically generating executable pathway models specified in BioPAX.

PubMed

Haydarlou, Reza; Jacobsen, Annika; Bonzanni, Nicola; Feenstra, K Anton; Abeln, Sanne; Heringa, Jaap

2016-06-15

Biological pathways play a key role in most cellular functions. To better understand these functions, diverse computational and cell biology researchers use biological pathway data for various analysis and modeling purposes. For specifying these biological pathways, a community of researchers has defined BioPAX and provided various tools for creating, validating and visualizing BioPAX models. However, a generic software framework for simulating BioPAX models is missing. Here, we attempt to fill this gap by introducing a generic simulation framework for BioPAX. The framework explicitly separates the execution model from the model structure as provided by BioPAX, with the advantage that the modelling process becomes more reproducible and intrinsically more modular; this ensures natural biological constraints are satisfied upon execution. The framework is based on the principles of discrete event systems and multi-agent systems, and is capable of automatically generating a hierarchical multi-agent system for a given BioPAX model. To demonstrate the applicability of the framework, we simulated two types of biological network models: a gene regulatory network modeling the haematopoietic stem cell regulators and a signal transduction network modeling the Wnt/β-catenin signaling pathway. We observed that the results of the simulations performed using our framework were entirely consistent with the simulation results reported by the researchers who developed the original models in a proprietary language. The framework, implemented in Java, is open source and its source code, documentation and tutorial are available at http://www.ibi.vu.nl/programs/BioASF CONTACT: j.heringa@vu.nl. © The Author 2016. Published by Oxford University Press.

Integration of a Portfolio-based Approach to Evaluate Aerospace R and D Problem Formulation Into a Parametric Synthesis Tool

NASA Astrophysics Data System (ADS)

Oza, Amit R.

The focus of this study is to improve R&D effectiveness towards aerospace and defense planning in the early stages of the product development lifecycle. Emphasis is on: correct formulation of a decision problem, with special attention to account for data relationships between the individual design problem and the system capability required to size the aircraft, understanding of the meaning of the acquisition strategy objective and subjective data requirements that are required to arrive at a balanced analysis and/or "correct" mix of technology projects, understanding the meaning of the outputs that can be created from the technology analysis, and methods the researcher can use at effectively support decisions at the acquisition and conceptual design levels through utilization of a research and development portfolio strategy. The primary objectives of this study are to: (1) determine what strategy should be used to initialize conceptual design parametric sizing processes during requirements analysis for the materiel solution analysis stage of the product development lifecycle when utilizing data already constructed in the latter phase when working with a generic database management system synthesis tool integration architecture for aircraft design , and (2) assess how these new data relationships can contribute for innovative decision-making when solving acquisition hardware/technology portfolio problems. As such, an automated composable problem formulation system is developed to consider data interactions for the system architecture that manages acquisition pre-design concept refinement portfolio management, and conceptual design parametric sizing requirements. The research includes a way to: • Formalize the data storage and implement the data relationship structure with a system architecture automated through a database management system. • Allow for composable modeling, in terms of level of hardware abstraction, for the product model, mission model, and operational constraint model data blocks in the pre-design stages. • Allow the product model, mission model, and operational constraint model to be cross referenced with a generic aircraft synthesis capability to identify disciplinary analysis methods and processes. • Allow for matching, comparison, and balancing of the aircraft hardware portfolio to the associated developmental and technology risk metrics. • Allow for visualization technology portfolio decision space. The problem formulation architecture is finally implemented and verified for a generic hypersonic vehicle research demonstrator where a portfolio of technology hardware are measured for developmental and technology risks, prioritized by the researcher risk constraints, and the data generated delivered to a novel aircraft synthesis tool to confirm vehicle feasibility.

Therapeutic Equivalence Requires Pharmaceutical, Pharmacokinetic, and Pharmacodynamic Identities: True Bioequivalence of a Generic Product of Intravenous Metronidazole

PubMed Central

Agudelo, M.

2012-01-01

Animal models of infection have been used to demonstrate the therapeutic failure of “bioequivalent” generic products, but their applicability for this purpose requires the accurate identification of those products that are truly bioequivalent. Here, we present data comparing one intravenous generic product of metronidazole with the innovator product in a neutropenic mouse thigh anaerobic infection model. Simultaneous experiments allowed comparisons (generic versus innovator) of potency and the concentration of the active pharmaceutical ingredient (API), analytical chemistry (liquid chromatography/mass spectrometry [LC/MS]), in vitro susceptibility testing, single-dose serum pharmacokinetics (PK) in infected mice, and in vivo pharmacodynamics (PD) against Bacteroides fragilis ATCC 25825 in synergy with Escherichia coli SIG-1 in the neutropenic mouse thigh anaerobic infection model. The Hill dose-response model followed by curve-fitting analysis was used to calculate and compare primary and secondary PD parameters. The generic and the innovator products were identical in terms of the concentration and potency of the API, chromatographic and spectrographic profiles, MIC and minimal bactericidal concentrations (MBC) (2.0 mg/liter), and mouse PK. We found no differences between products in bacteriostatic doses (BD) (15 to 22 mg/kg of body weight per day) or the doses needed to kill 1 log (1LKD) (21 to 29 mg/kg per day) or 2 logs (2LKD) (28 to 54 mg/kg per day) of B. fragilis under dosing schedules of every 12 h (q12h), q8h, or q6h. The area under the concentration-time curve over 24 h in the steady state divided by the MIC (AUC/MIC ratio) was the best PD index to predict the antibacterial efficacy of metronidazole (adjusted coefficient of determination [AdjR2] = 84.6%), and its magnitude to reach bacteriostasis in vivo (56.6 ± 5.17 h) or to kill the first (90.8 ± 9.78 h) and second (155.5 ± 22.2 h) logs was the same for both products. Animal models of infection allow a thorough demonstration of the therapeutic equivalence of generic antimicrobials. PMID:22330928

Validation of the Korean version of the pediatric quality of life inventory 4.0 (PedsQL) generic core scales in school children and adolescents using the Rasch model.

PubMed

Kook, Seung Hee; Varni, James W

2008-06-02

The Pediatric Quality of Life Inventory (PedsQL) is a child self-report and parent proxy-report instrument designed to assess health-related quality of life (HRQOL) in healthy and ill children and adolescents. It has been translated into over 70 international languages and proposed as a valid and reliable pediatric HRQOL measure. This study aimed to assess the psychometric properties of the Korean translation of the PedsQL 4.0 Generic Core Scales. Following the guidelines for linguistic validation, the original US English scales were translated into Korean and cognitive interviews were administered. The field testing responses of 1425 school children and adolescents and 1431 parents to the Korean version of PedsQL 4.0 Generic Core Scales were analyzed utilizing confirmatory factor analysis and the Rasch model. Consistent with studies using the US English instrument and other translation studies, score distributions were skewed toward higher HRQOL in a predominantly healthy population. Confirmatory factor analysis supported a four-factor and a second order-factor model. The analysis using the Rasch model showed that person reliabilities are low, item reliabilities are high, and the majority of items fit the model's expectation. The Rasch rating scale diagnostics showed that PedsQL 4.0 Generic Core Scales in general have the optimal number of response categories, but category 4 (almost always a problem) is somewhat problematic for the healthy school sample. The agreements between child self-report and parent proxy-report were moderate. The results demonstrate the feasibility, validity, item reliability, item fit, and agreement between child self-report and parent proxy-report of the Korean version of PedsQL 4.0 Generic Core Scales for school population health research in Korea. However, the utilization of the Korean version of the PedsQL 4.0 Generic Core Scales for healthy school populations needs to consider low person reliability, ceiling effects and cultural differences, and further validation studies on Korean clinical samples are required.

Product-based Safety Certification for Medical Devices Embedded Software.

PubMed

Neto, José Augusto; Figueiredo Damásio, Jemerson; Monthaler, Paul; Morais, Misael

2015-01-01

Worldwide medical device embedded software certification practices are currently focused on manufacturing best practices. In Brazil, the national regulatory agency does not hold a local certification process for software-intensive medical devices and admits international certification (e.g. FDA and CE) from local and international industry to operate in the Brazilian health care market. We present here a product-based certification process as a candidate process to support the Brazilian regulatory agency ANVISA in medical device software regulation. Center of Strategic Technology for Healthcare (NUTES) medical device embedded software certification is based on a solid safety quality model and has been tested with reasonable success against the Class I risk device Generic Infusion Pump (GIP).

Generic Engineering Competencies: A Review and Modelling Approach

ERIC Educational Resources Information Center

Male, Sally A.

2010-01-01

This paper puts forward the view that engineering educators have a responsibility to prepare graduates for engineering work and careers. The current literature reveals gaps between the competencies required for engineering work and those developed in engineering education. Generic competencies feature in these competency gaps. Literature suggests…

Testing process predictions of models of risky choice: a quantitative model comparison approach

PubMed Central

Pachur, Thorsten; Hertwig, Ralph; Gigerenzer, Gerd; Brandstätter, Eduard

2013-01-01

This article presents a quantitative model comparison contrasting the process predictions of two prominent views on risky choice. One view assumes a trade-off between probabilities and outcomes (or non-linear functions thereof) and the separate evaluation of risky options (expectation models). Another view assumes that risky choice is based on comparative evaluation, limited search, aspiration levels, and the forgoing of trade-offs (heuristic models). We derived quantitative process predictions for a generic expectation model and for a specific heuristic model, namely the priority heuristic (Brandstätter et al., 2006), and tested them in two experiments. The focus was on two key features of the cognitive process: acquisition frequencies (i.e., how frequently individual reasons are looked up) and direction of search (i.e., gamble-wise vs. reason-wise). In Experiment 1, the priority heuristic predicted direction of search better than the expectation model (although neither model predicted the acquisition process perfectly); acquisition frequencies, however, were inconsistent with both models. Additional analyses revealed that these frequencies were primarily a function of what Rubinstein (1988) called “similarity.” In Experiment 2, the quantitative model comparison approach showed that people seemed to rely more on the priority heuristic in difficult problems, but to make more trade-offs in easy problems. This finding suggests that risky choice may be based on a mental toolbox of strategies. PMID:24151472

Pharmacists' views and reported practices in relation to a new generic drug substitution policy in Lebanon: a mixed methods study.

PubMed

El-Jardali, Fadi; Fadlallah, Racha; Morsi, Rami Z; Hemadi, Nour; Al-Gibbawi, Mounir; Haj, Magda; Khalil, Suzan; Saklawi, Youssef; Jamal, Diana; Akl, Elie A

2017-02-17

Governments in both developed and developing countries have adopted generic drug substitution policies to decrease pharmaceutical expenditures and improve access to medicine. In August 2015, the Ministry of Public Health (MOPH) in Lebanon introduced generic drug substitution and a unified medical prescription form as policy instruments to promote generic drug use. The objective of this exploratory study was to examine the attitudes of community pharmacists and the reported practices in relation to the implementation of the new generic drug substitution policy. We used a cross-sectional mixed methods approach composed of self-administered questionnaires and semi-structured interviews. The study population consisted of community pharmacists in Lebanon. We randomly approached one pharmacy personnel from each selected community pharmacy. We conducted descriptive analyses to assess responses to questionnaire and regression analyses to understand associations between responses and respondent demographics. We analyzed qualitative data thematically. Out of 204 invited community pharmacies, 153 pharmacies participated (75% response rate). The majority of respondents (64%) were in favor of generic drug substitution; however, less than half (40%) indicated they have substituted brand drugs for generic equivalents. Moreover, 57% indicated that the existing pricing system discourages them from performing generic drug substitution. Most respondents indicated that physicians are overusing the "non-substitutable" option (84%) and that there are technical problems with processing the new prescription form (78%). Less than half (47%) reported that the MOPH is performing regular audits on the forms collected by the pharmacy. While 45% of the respondents indicated that consumers have accepted most of the generic substitutions, 21% perceived the increase in generic drug dispensing to be significant. Findings suggested a potentially significant association between being informed about generic drugs and respondents' support of the policy. Suggested strategies to address implementation challenges included strengthening stewardship function of MOPH, securing full commitment of health care providers, conducting educational and awareness campaigns about generic drugs and generic drug substitution, and aligning incentive systems of the key stakeholders. The majority of community pharmacists were supportive of generic drug substitution in general but not of the current implementation of the policy in Lebanon. Findings revealed implementation challenges at the provider, patient, and system level which are hindering attainment of the policy objectives. The key lessons derived from this study can be used for continuous improvement of the policy and its implementation.

Enhancing the Resilience of Interdependent Critical Infrastructure Systems Using a Common Computational Framework

NASA Astrophysics Data System (ADS)

Little, J. C.; Filz, G. M.

2016-12-01

As modern societies become more complex, critical interdependent infrastructure systems become more likely to fail under stress unless they are designed and implemented to be resilient. Hurricane Katrina clearly demonstrated the catastrophic and as yet unpredictable consequences of such failures. Resilient infrastructure systems maintain the flow of goods and services in the face of a broad range of natural and manmade hazards. In this presentation, we illustrate a generic computational framework to facilitate high-level decision-making about how to invest scarce resources most effectively to enhance resilience in coastal protection, transportation, and the economy of a region. Coastal Louisiana, our study area, has experienced the catastrophic effects of several land-falling hurricanes in recent years. In this project, we implement and further refine three process models (a coastal protection model, a transportation model, and an economic model) for the coastal Louisiana region. We upscale essential mechanistic features of the three detailed process models to the systems level and integrate the three reduced-order systems models in a modular fashion. We also evaluate the proposed approach in annual workshops with input from stakeholders. Based on stakeholder inputs, we derive a suite of goals, targets, and indicators for evaluating resilience at the systems level, and assess and enhance resilience using several deterministic scenarios. The unifying framework will be able to accommodate the different spatial and temporal scales that are appropriate for each model. We combine our generic computational framework, which encompasses the entire system of systems, with the targets, and indicators needed to systematically meet our chosen resilience goals. We will start with targets that focus on technical and economic systems, but future work will ensure that targets and indicators are extended to other dimensions of resilience including those in the environmental and social systems. The overall model can be used to optimize decision making in a probabilistic risk-based framework.

Towards a generalized energy prediction model for machine tools

PubMed Central

Bhinge, Raunak; Park, Jinkyoo; Law, Kincho H.; Dornfeld, David A.; Helu, Moneer; Rachuri, Sudarsan

2017-01-01

Energy prediction of machine tools can deliver many advantages to a manufacturing enterprise, ranging from energy-efficient process planning to machine tool monitoring. Physics-based, energy prediction models have been proposed in the past to understand the energy usage pattern of a machine tool. However, uncertainties in both the machine and the operating environment make it difficult to predict the energy consumption of the target machine reliably. Taking advantage of the opportunity to collect extensive, contextual, energy-consumption data, we discuss a data-driven approach to develop an energy prediction model of a machine tool in this paper. First, we present a methodology that can efficiently and effectively collect and process data extracted from a machine tool and its sensors. We then present a data-driven model that can be used to predict the energy consumption of the machine tool for machining a generic part. Specifically, we use Gaussian Process (GP) Regression, a non-parametric machine-learning technique, to develop the prediction model. The energy prediction model is then generalized over multiple process parameters and operations. Finally, we apply this generalized model with a method to assess uncertainty intervals to predict the energy consumed to machine any part using a Mori Seiki NVD1500 machine tool. Furthermore, the same model can be used during process planning to optimize the energy-efficiency of a machining process. PMID:28652687

Towards a generalized energy prediction model for machine tools.

PubMed

Bhinge, Raunak; Park, Jinkyoo; Law, Kincho H; Dornfeld, David A; Helu, Moneer; Rachuri, Sudarsan

2017-04-01

Energy prediction of machine tools can deliver many advantages to a manufacturing enterprise, ranging from energy-efficient process planning to machine tool monitoring. Physics-based, energy prediction models have been proposed in the past to understand the energy usage pattern of a machine tool. However, uncertainties in both the machine and the operating environment make it difficult to predict the energy consumption of the target machine reliably. Taking advantage of the opportunity to collect extensive, contextual, energy-consumption data, we discuss a data-driven approach to develop an energy prediction model of a machine tool in this paper. First, we present a methodology that can efficiently and effectively collect and process data extracted from a machine tool and its sensors. We then present a data-driven model that can be used to predict the energy consumption of the machine tool for machining a generic part. Specifically, we use Gaussian Process (GP) Regression, a non-parametric machine-learning technique, to develop the prediction model. The energy prediction model is then generalized over multiple process parameters and operations. Finally, we apply this generalized model with a method to assess uncertainty intervals to predict the energy consumed to machine any part using a Mori Seiki NVD1500 machine tool. Furthermore, the same model can be used during process planning to optimize the energy-efficiency of a machining process.

Pressurization System Modeling for a Generic Bimese Two- Stage-to-Orbit Reusable Launch Vehicle

NASA Technical Reports Server (NTRS)

Mazurkivich, Pete; Chandler, Frank; Nguyen, Han

2005-01-01

A pressurization system model was developed for a generic bimese Two-Stage-to-orbit Reusable Launch Vehicle using a cross-feed system and operating with densified propellants. The model was based on the pressurization system model for a crossfeed subscale water test article and was validated with test data obtained from the test article. The model consists of the liquid oxygen and liquid hydrogen pressurization models, each made up of two submodels, Booster and Orbiter tank pressurization models. The tanks are controlled within a 0.2-psi band and pressurized on the ground with ambient helium and autogenously in flight with gaseous oxygen and gaseous hydrogen. A 15-psi pressure difference is maintained between the Booster and Orbiter tanks to ensure crossfeed check valve closure before Booster separation. The analysis uses an ascent trajectory generated for a generic bimese vehicle and a tank configuration based on the Space Shuttle External Tank. It determines the flow rates required to pressurize the tanks on the ground and in flight, and demonstrates the model's capability to analyze the pressurization system performance of a full-scale bimese vehicle with densified propellants.

Impact of the introduction of mandatory generic substitution in South Africa: private sector sales of generic and originator medicines for chronic diseases.

PubMed

Gray, Andrew Lofts; Santa-Ana-Tellez, Yared; J Wirtz, Veronika

2016-12-01

To assess the impact of mandatory offer of generic substitution, introduced in South Africa in May 2003, on private sector sales of generic and originator medicines for chronic diseases. Private sector sales data (June 2001 to May 2005) were obtained from IMS Health for proton pump inhibitors (PPIs; ATC code A02BC), HMG-CoA reductase inhibitors (statins; C10AA), dihydropyridine calcium antagonists (C08CA), angiotensin-converting enzyme inhibitors (ACE-I; C09AA) and selective serotonin reuptake inhibitors (SSRIs; N06AB). Monthly sales were expressed as defined daily doses per 1000 insured population per month (DDD/TIM). Interrupted time-series models were used to estimate the changes in slope and level of medicines use after the policy change. ARIMA models were used to correct for autocorrelation and stationarity. Only the SSRIs saw a significant rise in level of generic utilisation (0.2 DDD/TIM; P < 0.001) and a fall in originator usage (-0.1 DDD/TIM; P < 0.001) after the policy change. Utilisation of generic PPIs fell (level 0.06 DDD/TIM, P = 0.048; slope 0.01 DDD/TIM, P = 0.043), but utilisation of originator products also grew (level 0.05 DDD/TIM, P < 0.001; slope 0.003, P = 0.001). Generic calcium antagonists and ACE-I showed an increase in slope (0.01 DDD/TIM, P = 0.016; 0.02 DDD/TIM, P < 0.001), while the originators showed a decrease in slope (-0.003 DDD/TIM, P = 0.046; -0.01 DDD/TIM, P < 0.001). There were insufficient data on generic statin use before the policy change to allow for analysis. The mandatory offer of generic substitution appeared to have had a quantifiable effect on utilisation patterns in the 2 years after May 2003. Managed care interventions that were already in place before the intervention may have blunted the extent of the changes seen in this period. Generic policies are an important enabling provision for cost-containment efforts. However, decisions taken outside of official policy may anticipate or differ from that policy, with important consequences. © 2016 John Wiley & Sons Ltd.

An intelligent position-specific training system for mission operations

NASA Technical Reports Server (NTRS)

Schneider, M. P.

1992-01-01

Marshall Space Flight Center's (MSFC's) payload ground controller training program provides very good generic training; however, ground controller position-specific training can be improved by including position-specific training systems in the training program. This report explains why MSFC needs to improve payload ground controller position-specific training. The report describes a generic syllabus for position-specific training systems, a range of system designs for position-specific training systems, and a generic development process for developing position-specific training systems. The report also describes a position-specific training system prototype that was developed for the crew interface coordinator payload operations control center ground controller position. The report concludes that MSFC can improve the payload ground controller training program by incorporating position-specific training systems for each ground controller position; however, MSFC should not develop position-specific training systems unless payload ground controller position experts will be available to participate in the development process.

Using the Knowledge, Process, Practice (KPP) model for driving the design and development of online postgraduate medical education.

PubMed

Shaw, Tim; Barnet, Stewart; Mcgregor, Deborah; Avery, Jennifer

2015-01-01

Online learning is a primary delivery method for continuing health education programs. It is critical that programs have curricula objectives linked to educational models that support learning. Using a proven educational modelling process ensures that curricula objectives are met and a solid basis for learning and assessment is achieved. To develop an educational design model that produces an educationally sound program development plan for use by anyone involved in online course development. We have described the development of a generic educational model designed for continuing health education programs. The Knowledge, Process, Practice (KPP) model is founded on recognised educational theory and online education practice. This paper presents a step-by-step guide on using this model for program development that encases reliable learning and evaluation. The model supports a three-step approach, KPP, based on learning outcomes and supporting appropriate assessment activities. It provides a program structure for online or blended learning that is explicit, educationally defensible, and supports multiple assessment points for health professionals. The KPP model is based on best practice educational design using a structure that can be adapted for a variety of online or flexibly delivered postgraduate medical education programs.

Predicting of biomass in Brazilian tropical dry forest: a statistical evaluation of generic equations.

PubMed

Lima, Robson B DE; Alves, Francisco T; Oliveira, Cinthia P DE; Silva, José A A DA; Ferreira, Rinaldo L C

2017-01-01

Dry tropical forests are a key component in the global carbon cycle and their biomass estimates depend almost exclusively of fitted equations for multi-species or individual species data. Therefore, a systematic evaluation of statistical models through validation of estimates of aboveground biomass stocks is justifiable. In this study was analyzed the capacity of generic and specific equations obtained from different locations in Mexico and Brazil, to estimate aboveground biomass at multi-species levels and for four different species. Generic equations developed in Mexico and Brazil performed better in estimating tree biomass for multi-species data. For Poincianella bracteosa and Mimosa ophthalmocentra, only the Sampaio and Silva (2005) generic equation was the most recommended. These equations indicate lower tendency and lower bias, and biomass estimates for these equations are similar. For the species Mimosa tenuiflora, Aspidosperma pyrifolium and for the genus Croton the specific regional equations are more recommended, although the generic equation of Sampaio and Silva (2005) is not discarded for biomass estimates. Models considering gender, families, successional groups, climatic variables and wood specific gravity should be adjusted, tested and the resulting equations should be validated at both local and regional levels as well as on the scales of tropics with dry forest dominance.

What's in a (Role) Name? Formal and Conceptual Aspects of Comprehending Personal Nouns

ERIC Educational Resources Information Center

Irmen, Lisa

2007-01-01

Two eye-tracking studies assessed effects of grammatical and conceptual gender cues in generic role name processing in German. Participants read passages about a social or occupational group introduced by way of a generic role name(e.g., "Soldaten"/soldiers, "Kunstler"/artists). Later in the passage the gender of this group was specified by the…

Conceptual design and evaluation of selected Space Station concepts, volume 1

NASA Technical Reports Server (NTRS)

1983-01-01

Space Station configuration concepts are defined to meet the NASA Headquarters Concept Development Group (CDG) requirements. Engineering and programmatic data are produced on these concepts suitable for NASA and industry dissemination. A data base is developed for input to the CDG's evaluation of generic Space Station configurations and for use in the critique of the CDG's generic configuration evaluation process.

Generics license 30-month-olds’ inferences about the atypical properties of novel kinds

PubMed Central

Graham, Susan A.; Gelman, Susan A.; Clarke, Jessica

2016-01-01

We examined whether the distinction between generic and nongeneric language provides toddlers with a rapid and efficient means to learn about kinds. In Experiment 1, we examined 30-month-olds’ willingness to extend atypical properties to members of an unfamiliar category when the properties were introduced in one of three ways: a) using a generic noun phrase (“Blicks drink ketchup”); b) using a nongeneric noun phrase (“These blicks drink ketchup”); and c) using an attentional phrase (“Look at this”). Hearing a generic noun phrase boosted toddlers’ extension of properties to both the model exemplars and to novel members of the same category, relative to when a property had been introduced with a nongeneric noun phrase or an attentional phrase. In Experiment 2, properties were introduced with a generic noun phrase and toddlers extended novel properties to members of the same-category, but not to an out-of-category object. Taken together, these findings demonstrate that generics highlight the stability of a feature and foster generalization of the property to novel within-category exemplars. PMID:27505699

Generic HTML Form Processor: A versatile PHP script to save web-collected data into a MySQL database.

PubMed

Göritz, Anja S; Birnbaum, Michael H

2005-11-01

The customizable PHP script Generic HTML Form Processor is intended to assist researchers and students in quickly setting up surveys and experiments that can be administered via the Web. This script relieves researchers from the burdens of writing new CGI scripts and building databases for each Web study. Generic HTML Form Processor processes any syntactically correct HTML forminput and saves it into a dynamically created open-source database. We describe five modes for usage of the script that allow increasing functionality but require increasing levels of knowledge of PHP and Web servers: The first two modes require no previous knowledge, and the fifth requires PHP programming expertise. Use of Generic HTML Form Processor is free for academic purposes, and its Web address is www.goeritz.net/brmic.

FDA's proposed rules on patent listing requirements for new drug and 30-month stays on ANDA approval (proposed Oct. 24, 2002).

PubMed

Hui, Yuk Fung

2003-01-01

In order to close the loophole in the generic drug approval process that allows a brand name drug patent holder to delay or defeat generic drug application merely by technicality, the FDA recently proposed to modify its regulations. Those proposals affect the patent listing requirements of a new drug application, and the duration of time that a generic drug application could be put on hold in the event of a patent infringement suit. With the modified rules, the FDA expects to see an increase in the availability of generic drugs, which eventually will lead to lower drug costs. Ms. Hui discusses the contents of the proposed regulations and provides an analysis of the proposed rule's legal authority, implications on patent rights, and impact on the pharmaceutical industry.

An international technology platform for influenza vaccines.

PubMed

Hendriks, Jan; Holleman, Marit; de Boer, Otto; de Jong, Patrick; Luytjes, Willem

2011-07-01

Since 2008, the World Health Organization has provided seed grants to 11 manufacturers in low- and middle-income countries to establish or improve their pandemic influenza vaccine production capacity. To facilitate this ambitious project, an influenza vaccine technology platform (or "hub") was established at the Netherlands Vaccine Institute for training and technology transfer to developing countries. During its first two years of operation, a robust and transferable monovalent pilot process for egg-based inactivated whole virus influenza A vaccine production was established under international Good Manufacturing Practice standards, as well as in-process and release assays. A course curriculum was designed, including a two-volume practical handbook on production and quality control. Four generic hands-on training courses were successfully realized for over 40 employees from 15 developing country manufacturers. Planned extensions to the curriculum include cell-culture based technology for viral vaccine production, split virion influenza production, and generic adjuvant formulation. We conclude that technology transfer through the hub model works well, significantly builds vaccine manufacturing capacity in developing countries, and thereby increases global and equitable access to vaccines of high public health relevance. Copyright © 2011 Elsevier Ltd. All rights reserved.

Simulation of Biomimetic Recognition between Polymers and Surfaces

NASA Astrophysics Data System (ADS)

Golumbfskie, Aaron J.; Pande, Vijay S.; Chakraborty, Arup K.

1999-10-01

Many biological processes, such as transmembrane signaling and pathogen-host interactions, are initiated by a protein recognizing a specific pattern of binding sites on part of a membrane or cell surface. By recognition, we imply that the polymer quickly finds and then adsorbs strongly on the pattern-matched region and not on others. The development of synthetic systems that can mimic such recognition between polymers and surfaces could have significant impact on advanced applications such as the development of sensors, molecular-scale separation processes, and synthetic viral inhibition agents. Attempting to affect recognition in synthetic systems by copying the detailed chemistries to which nature has been led over millenia of evolution does not seem practical for most applications. This leads us to the following question: Are there any universal strategies that can affect recognition between polymers and surfaces? Such generic strategies may be easier to implement in abiotic applications. We describe results that suggest that biomimetic recognition between synthetic polymers and surfaces is possible by exploiting certain generic strategies, and we elucidate the kinetic mechanisms by which this occurs. Our results suggest convenient model systems for experimental studies of dynamics in free energy landscapes characteristic of frustrated systems.

TagDust2: a generic method to extract reads from sequencing data.

PubMed

Lassmann, Timo

2015-01-28

Arguably the most basic step in the analysis of next generation sequencing data (NGS) involves the extraction of mappable reads from the raw reads produced by sequencing instruments. The presence of barcodes, adaptors and artifacts subject to sequencing errors makes this step non-trivial. Here I present TagDust2, a generic approach utilizing a library of hidden Markov models (HMM) to accurately extract reads from a wide array of possible read architectures. TagDust2 extracts more reads of higher quality compared to other approaches. Processing of multiplexed single, paired end and libraries containing unique molecular identifiers is fully supported. Two additional post processing steps are included to exclude known contaminants and filter out low complexity sequences. Finally, TagDust2 can automatically detect the library type of sequenced data from a predefined selection. Taken together TagDust2 is a feature rich, flexible and adaptive solution to go from raw to mappable NGS reads in a single step. The ability to recognize and record the contents of raw reads will help to automate and demystify the initial, and often poorly documented, steps in NGS data analysis pipelines. TagDust2 is freely available at: http://tagdust.sourceforge.net .

Two-dimensional ice mapping of molecular cores

NASA Astrophysics Data System (ADS)

Noble, J. A.; Fraser, H. J.; Pontoppidan, K. M.; Craigon, A. M.

2017-06-01

We present maps of the column densities of H2O, CO2 and CO ices towards the molecular cores B 35A, DC 274.2-00.4, BHR 59 and DC 300.7-01.0. These ice maps, probing spatial distances in molecular cores as low as 2200 au, challenge the traditional hypothesis that the denser the region observed, the more ice is present, providing evidence that the relationships between solid molecular species are more varied than the generic picture we often adopt to model gas-grain chemical processes and explain feedback between solid phase processes and gas phase abundances. We present the first combined solid-gas maps of a single molecular species, based upon observations of both CO ice and gas phase C18O towards B 35A, a star-forming dense core in Orion. We conclude that molecular species in the solid phase are powerful tracers of 'small-scale' chemical diversity, prior to the onset of star formation. With a component analysis approach, we can probe the solid phase chemistry of a region at a level of detail greater than that provided by statistical analyses or generic conclusions drawn from single pointing line-of-sight observations alone.

A generic rate equation for catalysed, template-directed polymerisation.

PubMed

Hofmeyr, Jan-Hendrik S; Gqwaka, Olona P C; Rohwer, Johann M

2013-09-02

Biosynthetic networks link to growth and reproduction processes through template-directed synthesis of macromolecules such as polynucleotides and polypeptides. No rate equation exists that captures this link in a way that it can effectively be incorporated into a single computational model of the overall process. This paper describes the derivation of such a generic steady-state rate equation for catalysed, template-directed polymerisation reactions with varying monomer stoichiometry and varying chain length. The derivation is based on a classical Michaelis-Menten mechanism with template binding and an arbitrary number of chain elongation steps that produce a polymer composed of an arbitrary number of monomer types. The rate equation only requires the identity of the first dimer in the polymer sequence; for the remainder only the monomer composition needs be known. Further simplification of a term in the denominator yielded an equation requiring no positional information at all, only the monomer composition of the polymer; this equation still gave an excellent estimate of the reaction rate provided that either the monomer concentrations are at least half-saturating, or the polymer is very long. Copyright © 2013 Federation of European Biochemical Societies. Published by Elsevier B.V. All rights reserved.

Superthermal photon bunching in terms of simple probability distributions

NASA Astrophysics Data System (ADS)

Lettau, T.; Leymann, H. A. M.; Melcher, B.; Wiersig, J.

2018-05-01

We analyze the second-order photon autocorrelation function g(2 ) with respect to the photon probability distribution and discuss the generic features of a distribution that results in superthermal photon bunching [g(2 )(0 ) >2 ]. Superthermal photon bunching has been reported for a number of optical microcavity systems that exhibit processes such as superradiance or mode competition. We show that a superthermal photon number distribution cannot be constructed from the principle of maximum entropy if only the intensity and the second-order autocorrelation are given. However, for bimodal systems, an unbiased superthermal distribution can be constructed from second-order correlations and the intensities alone. Our findings suggest modeling superthermal single-mode distributions by a mixture of a thermal and a lasinglike state and thus reveal a generic mechanism in the photon probability distribution responsible for creating superthermal photon bunching. We relate our general considerations to a physical system, i.e., a (single-emitter) bimodal laser, and show that its statistics can be approximated and understood within our proposed model. Furthermore, the excellent agreement of the statistics of the bimodal laser and our model reveals that the bimodal laser is an ideal source of bunched photons, in the sense that it can generate statistics that contain no other features but the superthermal bunching.

Disclosure of industry payments to prescribers: industry payments might be a factor impacting generic drug prescribing.

PubMed

Qian, Jingjing; Hansen, Richard A; Surry, Daniel; Howard, Jennifer; Kiptanui, Zippora; Harris, Ilene

2017-07-01

Pharmaceutical companies paid at least $3.91bn to prescribers in 2013, yet evidence indicating whether industry payments shift prescribing away from generics is limited. This study examined the association between amount of industry payments to prescribers and generic drug prescribing rates among Medicare Part D prescribers. A cross-sectional analysis was conducted among 770 095 Medicare Part D prescribers after linking the 2013 national Open Payments data with 2013 Medicare Provider Utilization and Payment data. The exposure variable was the categorized amount of total industry payments to prescribers (i.e., meals, travel, research, and ownership). The outcome was prescriber's annual generic drug prescribing rate. Multivariable generalized linear regression models were used to examine the association between the amount of industry payments and prescriber's annual generic drug prescribing rates, controlling for prescriber's demographic and practice characteristics. In this sample, over one-third (38.0%) of Medicare Part D prescribers received industry payments in 2013. The mean annual generic drug prescribing rate was highest among prescribers receiving no payments and lowest among those receiving more than $500 of industry payments (77.5% vs. 71.3%, respectively; p < 0.001). The receipt of industry payments was independently associated with prescribers' generic drug prescribing rate; higher payments corresponded with lower generic drug prescribing rates. Other prescriber characteristics associated with higher annual generic drug prescribing rate included male sex, non-northeast region, specialty, and patient volume. Receipt of industry payments was associated with a decreased rate of generic drug prescribing. How this affects patient care and total medical costs warrants further study. Copyright © 2017 John Wiley & Sons, Ltd. Copyright © 2017 John Wiley & Sons, Ltd.

Analyzing generic and branded substitution patterns in the Netherlands using prescription data.

PubMed

Pechlivanoglou, Petros; van der Veen, Willem Jan; Bos, Jens H; Postma, Maarten J

2011-04-27

As in other societies, pharmaceutical expenditures in the Netherlands are rising every year. As a consequence, needs for cost control are often expressed. One possible solution for cost control could come through increasing generic substitution by pharmacists. We aim to analyse the extent and nature of substitution in recent years and estimate the likelihood of generic or branded substitution in Dutch pharmacies in relation to various characteristics. We utilized a linked prescription dataset originating from a general practitioner (GP) and a pharmacy database, both from the northern Netherlands. We selected specific drugs of interest, containing about 55,000 prescriptions from 15 different classes. We used a crossed generalized linear mixed model to estimate the effects that certain patient and pharmacy characteristics as well as timing have on the likelihood that a prescription will eventually be substituted by the pharmacist. Generic substitution occurred at 25% of the branded prescriptions. Generic substitution was more likely to occur earlier in time after patent expiry and to patients that were older and more experienced in their drug use. Individually owned pharmacies had a lower probability of generic substitution compared to chain pharmacies. Oppositely, branded substitution occurred in 10% of generic prescriptions and was positively related to the patients' experience in branded use. Individually owned pharmacies were more likely to substitute a generic drug to a branded compared to other pharmacies. Antidepressant and PPI prescriptions were less prone to generic and more prone to branded substitution. Analysis of prescription substitution by the pharmacist revealed strong relations between substitution and patient experience on drug use, pharmacy status and timing. These findings can be utilised to design further strategies to enhance generic substitution.

Studies on the Biology of the Tube-Building Amphipod Microdeutopus gryllotalpa. A Model for Marine Fouling Processes.

DTIC Science & Technology

1984-01-01

two pairs of chelae to carry the females. But, in addition, males of different genera carry their females in different, but highly stereotyped ways...173 (1980) Shillaker. R. 0. and P. G. Moore: Tube building by the amphipods Lang. K.: The genus Oosaccus Richardson and the brood pouch Lembos...from three genera, has shown that the smaller pair is used. In addition, the use of theme gnathopods is highly stereotyped , and generic-specific

EHR standards--A comparative study.

PubMed

Blobel, Bernd; Pharow, Peter

2006-01-01

For ensuring quality and efficiency of patient's care, the care paradigm moves from organization-centered over process-controlled towards personal care. Such health system paradigm change leads to new paradigms for analyzing, designing, implementing and deploying supporting health information systems including EHR systems as core application in a distributed eHealth environment. The paper defines the architectural paradigm for future-proof EHR systems. It compares advanced EHR architectures referencing them at the Generic Component Model. The paper introduces the evolving paradigm of autonomous computing for self-organizing health information systems.

Verification of Gyrokinetic codes: theoretical background and applications

NASA Astrophysics Data System (ADS)

Tronko, Natalia

2016-10-01

In fusion plasmas the strong magnetic field allows the fast gyro motion to be systematically removed from the description of the dynamics, resulting in a considerable model simplification and gain of computational time. Nowadays, the gyrokinetic (GK) codes play a major role in the understanding of the development and the saturation of turbulence and in the prediction of the consequent transport. We present a new and generic theoretical framework and specific numerical applications to test the validity and the domain of applicability of existing GK codes. For a sound verification process, the underlying theoretical GK model and the numerical scheme must be considered at the same time, which makes this approach pioneering. At the analytical level, the main novelty consists in using advanced mathematical tools such as variational formulation of dynamics for systematization of basic GK code's equations to access the limits of their applicability. The indirect verification of numerical scheme is proposed via the Benchmark process. In this work, specific examples of code verification are presented for two GK codes: the multi-species electromagnetic ORB5 (PIC), and the radially global version of GENE (Eulerian). The proposed methodology can be applied to any existing GK code. We establish a hierarchy of reduced GK Vlasov-Maxwell equations using the generic variational formulation. Then, we derive and include the models implemented in ORB5 and GENE inside this hierarchy. At the computational level, detailed verification of global electromagnetic test cases based on the CYCLONE are considered, including a parametric β-scan covering the transition between the ITG to KBM and the spectral properties at the nominal β value.

A Generic Authentication LoA Derivation Model

NASA Astrophysics Data System (ADS)

Yao, Li; Zhang, Ning

One way of achieving a more fine-grained access control is to link an authentication level of assurance (LoA) derived from a requester’s authentication instance to the authorisation decision made to the requester. To realise this vision, there is a need for designing a LoA derivation model that supports the use and quantification of multiple LoA-effecting attributes, and analyse their composite effect on a given authentication instance. This paper reports the design of such a model, namely a generic LoA derivation model (GEA- LoADM). GEA-LoADM takes into account of multiple authentication attributes along with their relationships, abstracts the composite effect by the multiple attributes into a generic value, authentication LoA, and provides algorithms for the run-time derivation of LoA. The algorithms are tailored to reflect the relationships among the attributes involved in an authentication instance. The model has a number of valuable properties, including flexibility and extensibility; it can be applied to different application contexts and support easy addition of new attributes and removal of obsolete ones.

Economic Models of Preventive Dentistry for Australian Children and Adolescents: A Systematic Review.

PubMed

Tonmukayakul, Utsana; Sia, Kah-Ling; Gold, Lisa; Hegde, Shalika; de Silva, Andrea M; Moodie, Marj

2015-01-01

To identify economic evaluation models and parameters that could be replicated or adapted to construct a generic model to assess cost-effectiveness of and prioritise a wide range of community-based oral disease prevention programmes in an Australian context. The literature search was conducted using MEDLINE, ERIC, PsycINFO, CINHAL (EBSCOhost), EMBASE (Ovid), CRD, DARE, NHSEED, HTA, all databases in the Cochrane library, Scopus and ScienceDirect databases from their inception to November 2012. Thirty-three articles met the criteria for inclusion in this review (7 were Australian studies, 26 articles were international). Existing models focused primarily on dental caries. Periodontal disease, another common oral health problem, was lacking. Among caries prevention studies, there was an absence of clear evidence showing continuous benefits from primary through to permanent dentition and the long-term effects of oral health promotion. No generic model was identified from previous studies that could be immediately adopted or adapted for our purposes of simulating and prioritising a diverse range of oral health interventions for Australian children and adolescents. Nevertheless, data sources specified in the existing Australian-based models will be useful for developing a generic model for such purposes.

DEPENDENCE OF THE Sr-TO-Ba AND Sr-TO-Eu RATIO ON THE NUCLEAR EQUATION OF STATE IN METAL-POOR HALO STARS

DOE Office of Scientific and Technical Information (OSTI.GOV)

Famiano, M. A.; Kajino, T.; Aoki, W.

A model is proposed in which the dependence on the equation of state (EOS) of the scatter of [Sr/Ba] in metal-poor stars is studied. Light r-process element enrichment in these stars has been explained via a truncated r-process, or “tr-process.” The truncation of the r-process from a generic core-collapse event followed by a collapse into an accretion-induced black hole is examined in the framework of a galactic chemical evolution model. The constraints on this model imposed by observations of extremely metal-poor stars are explained, and the upper limits in the [Sr/Ba] distributions are found to be related to the nuclearmore » EOS in a collapse scenario. The scatter in [Sr/Ba] and [Sr/Eu] as a function of metallicity has been found to be consistent with turbulent ejection in core-collapse supernovae. Adaptations of this model are evaluated to account for the scatter in isotopic observables. This is done by assuming mixing in ejecta in a supernova event. Stiff EOS are eliminated by this model.« less

Bottom-quark fusion processes at the LHC for probing Z' models and B -meson decay anomalies

NASA Astrophysics Data System (ADS)

Abdullah, Mohammad; Dalchenko, Mykhailo; Dutta, Bhaskar; Eusebi, Ricardo; Huang, Peisi; Kamon, Teruki; Rathjens, Denis; Thompson, Adrian

2018-04-01

We investigate models of a heavy neutral gauge boson Z' coupling mostly to third generation quarks and second generation leptons. In this scenario, bottom quarks arising from gluon splitting can fuse into Z' allowing the LHC to probe it. In the generic framework presented, anomalies in B -meson decays reported by the LHCb experiment imply a flavor-violating b s coupling of the featured Z' constraining the lowest possible production cross section. A novel approach searching for a Z'(→μ μ ) in association with at least one bottom-tagged jet can probe regions of model parameter space existing analyses are not sensitive to.

[Systemic therapies--a contribution to psychotherapy integration].

PubMed

Schiepek, Günter

2012-06-01

Some converging lines from neuroscience, neurobiological psychotherapy research, process-outcome-research, internet-based change monitoring and the systems and complexity sciences actually allow for an open and generic definition of systemic therapies. The "family" of systemic therapies as designed here is not restricted to the field of psychotherapy. It is a scientifically founded and engaged, bio-psycho-social multi-level approach to a common or integrative psychotherapy, not restricted to a psychotherapeutic confession or exclusively to family or couples therapy. A core element of systemic therapy is the support of self-organizing processes and the use of data-driven feedback tools. The conclusion goes to a modified concept of evidence-based practice and, vice versa, practice-based evidence, to an integration of the medical model and the common factors model into a self-organization theory of human change processes, and to a list of criteria for scientifically based practice in psychotherapy. © Georg Thieme Verlag KG Stuttgart · New York.

Experiments and Modeling in Support of Generic Salt Repository Science

DOE Office of Scientific and Technical Information (OSTI.GOV)

Bourret, Suzanne Michelle; Stauffer, Philip H.; Weaver, Douglas James

Salt is an attractive material for the disposition of heat generating nuclear waste (HGNW) because of its self-sealing, viscoplastic, and reconsolidation properties (Hansen and Leigh, 2012). The rate at which salt consolidates and the properties of the consolidated salt depend on the composition of the salt, including its content in accessory minerals and moisture, and the temperature under which consolidation occurs. Physicochemical processes, such as mineral hydration/dehydration salt dissolution and precipitation play a significant role in defining the rate of salt structure changes. Understanding the behavior of these complex processes is paramount when considering safe design for disposal of heat-generatingmore » nuclear waste (HGNW) in salt formations, so experimentation and modeling is underway to characterize these processes. This report presents experiments and simulations in support of the DOE-NE Used Fuel Disposition Campaign (UFDC) for development of drift-scale, in-situ field testing of HGNW in salt formations.« less

Developing photoreceptor-based models of visual attraction in riverine tsetse, for use in the engineering of more-attractive polyester fabrics for control devices.

PubMed

Santer, Roger D

2017-03-01

Riverine tsetse transmit the parasites that cause the most prevalent form of human African trypanosomiasis, Gambian HAT. In response to the imperative for cheap and efficient tsetse control, insecticide-treated 'tiny targets' have been developed through refinement of tsetse attractants based on blue fabric panels. However, modern blue polyesters used for this purpose attract many less tsetse than traditional phthalogen blue cottons. Therefore, colour engineering polyesters for improved attractiveness has great potential for tiny target development. Because flies have markedly different photoreceptor spectral sensitivities from humans, and the responses of these photoreceptors provide the inputs to their visually guided behaviours, it is essential that polyester colour engineering be guided by fly photoreceptor-based explanations of tsetse attraction. To this end, tsetse attraction to differently coloured fabrics was recently modelled using the calculated excitations elicited in a generic set of fly photoreceptors as predictors. However, electrophysiological data from tsetse indicate the potential for modified spectral sensitivities versus the generic pattern, and processing of fly photoreceptor responses within segregated achromatic and chromatic channels has long been hypothesised. Thus, I constructed photoreceptor-based models explaining the attraction of G. f. fuscipes to differently coloured tiny targets recorded in a previously published investigation, under differing assumptions about tsetse spectral sensitivities and organisation of visual processing. Models separating photoreceptor responses into achromatic and chromatic channels explained attraction better than earlier models combining weighted photoreceptor responses in a single mechanism, regardless of the spectral sensitivities assumed. However, common principles for fabric colour engineering were evident across the complete set of models examined, and were consistent with earlier work. Tools for the calculation of fly photoreceptor excitations are available with this paper, and the ways in which these and photoreceptor-based models of attraction can provide colorimetric values for the engineering of more-attractively coloured polyester fabrics are discussed.

Developing photoreceptor-based models of visual attraction in riverine tsetse, for use in the engineering of more-attractive polyester fabrics for control devices

PubMed Central

2017-01-01

Riverine tsetse transmit the parasites that cause the most prevalent form of human African trypanosomiasis, Gambian HAT. In response to the imperative for cheap and efficient tsetse control, insecticide-treated ‘tiny targets’ have been developed through refinement of tsetse attractants based on blue fabric panels. However, modern blue polyesters used for this purpose attract many less tsetse than traditional phthalogen blue cottons. Therefore, colour engineering polyesters for improved attractiveness has great potential for tiny target development. Because flies have markedly different photoreceptor spectral sensitivities from humans, and the responses of these photoreceptors provide the inputs to their visually guided behaviours, it is essential that polyester colour engineering be guided by fly photoreceptor-based explanations of tsetse attraction. To this end, tsetse attraction to differently coloured fabrics was recently modelled using the calculated excitations elicited in a generic set of fly photoreceptors as predictors. However, electrophysiological data from tsetse indicate the potential for modified spectral sensitivities versus the generic pattern, and processing of fly photoreceptor responses within segregated achromatic and chromatic channels has long been hypothesised. Thus, I constructed photoreceptor-based models explaining the attraction of G. f. fuscipes to differently coloured tiny targets recorded in a previously published investigation, under differing assumptions about tsetse spectral sensitivities and organisation of visual processing. Models separating photoreceptor responses into achromatic and chromatic channels explained attraction better than earlier models combining weighted photoreceptor responses in a single mechanism, regardless of the spectral sensitivities assumed. However, common principles for fabric colour engineering were evident across the complete set of models examined, and were consistent with earlier work. Tools for the calculation of fly photoreceptor excitations are available with this paper, and the ways in which these and photoreceptor-based models of attraction can provide colorimetric values for the engineering of more-attractively coloured polyester fabrics are discussed. PMID:28306721

The Generic Resolution Advisor and Conflict Evaluator (GRACE) for Unmanned Aircraft Detect-And-Avoid Systems

NASA Technical Reports Server (NTRS)

Abramson, Michael; Refai, Mohamad; Santiago, Confesor

2017-01-01

The paper describes the Generic Resolution Advisor and Conflict Evaluator (GRACE), a novel alerting and guidance algorithm that combines flexibility, robustness, and computational efficiency. GRACE is generic since it was designed without any assumptions regarding temporal or spatial scales, aircraft performance, or its sensor and communication systems. Therefore, GRACE was adopted as a core component of the Java Architecture for Detect-And-Avoid (DAA) Extensibility and Modeling, developed by NASA as a research and modeling tool for Unmanned Aerial Systems Integration in the National Airspace System (NAS). GRACE has been used in a number of real-time and fast-time experiments supporting evolving requirements of DAA research, including parametric studies, NAS-wide simulations, human-in-the-loop experiments, and live flight tests.

Generic icing effects on forward flight performance of a model helicopter rotor

NASA Technical Reports Server (NTRS)

Tinetti, Ana F.; Korkan, Kenneth D.

1989-01-01

An experimental program using a commercially available model helicopter has been conducted in the TAMU 7 ft x 10 ft Subsonic Wind Tunnel to investigate main rotor performance degradation due to generic ice adhesion. Base and iced performance data were gathered as functions of fuselage incidence, blade collective pitch, main rotor rotational velocity, and freestream velocity. The experimental values have shown that, in general, the presence of generic ice introduces decrements in performance caused by leading edge separation regions and increased surface roughness. In addition to the expected changes in aerodynamic forces caused by variations in test Reynolds number, forward flight data seemed to be influenced by changes in freestream and rotational velocity. The dependence of the data upon such velocity variations was apparently enhanced by increases in blade chord.

Knowledge Acquisition of Generic Queries for Information Retrieval

PubMed Central

Seol, Yoon-Ho; Johnson, Stephen B.; Cimino, James J.

2002-01-01

Several studies have identified clinical questions posed by health care professionals to understand the nature of information needs during clinical practice. To support access to digital information sources, it is necessary to integrate the information needs with a computer system. We have developed a conceptual guidance approach in information retrieval, based on a knowledge base that contains the patterns of information needs. The knowledge base uses a formal representation of clinical questions based on the UMLS knowledge sources, called the Generic Query model. To improve the coverage of the knowledge base, we investigated a method for extracting plausible clinical questions from the medical literature. This poster presents the Generic Query model, shows how it is used to represent the patterns of clinical questions, and describes the framework used to extract knowledge from the medical literature.

Branded versus generic clopidogrel in cardiovascular diseases: a systematic review.

PubMed

Caldeira, Daniel; Fernandes, Ricardo M; Costa, João; David, Cláudio; Sampaio, Cristina; Ferreira, Joaquim J

2013-04-01

In the United States, patent for branded Plavix has recently expired. Some studies have compared branded and generic clopidogrel in terms of pharmacokinetic parameters in healthy volunteers, but data on patients and clinical outcomes are scarce. We aimed to review efficacy and safety data from studies comparing Plavix with generic clopidogrel in patients with cardiovascular disease. Electronic databases were searched (from inception to May 2012) for prospective studies evaluating branded versus generic clopidogrel in patients with cardiovascular diseases. Studies' characteristics and data estimates were retrieved. Pooled risk ratio (RR) and 95% confidence intervals (95% CIs) were estimated through a random-effects model. Three studies evaluating 760 patients were included: 2 randomized controlled trials and 1 cohort study. The RR for major cardiovascular events was 1.01 (95% CI, 0.67-1.52). Incidence of adverse events was similar between Plavix and generic (RR 0.85; 95% CI, 0.49-1.48). The risks of mortality, bleeding, and drug discontinuation were also not different between groups. There are a limited number of studies comparing Plavix and generic clopidogrel in patients with cardiovascular diseases and reporting hard clinical end points. The available evidence is therefore limited and does not support the existence of differences in efficacy or safety between branded and generic clopidogrel.

USAF solar thermal applications overview

NASA Technical Reports Server (NTRS)

Hauger, J. S.; Simpson, J. A.

1981-01-01

Process heat applications were compared to solar thermal technologies. The generic process heat applications were analyzed for solar thermal technology utilization, using SERI's PROSYS/ECONOMAT model in an end use matching analysis and a separate analysis was made for solar ponds. Solar technologies appear attractive in a large number of applications. Low temperature applications at sites with high insolation and high fuel costs were found to be most attractive. No one solar thermal technology emerges as a clearly universal or preferred technology, however,, solar ponds offer a potential high payoff in a few, selected applications. It was shown that troughs and flat plate systems are cost effective in a large number of applications.

Processing emotion from abstract art in frontotemporal lobar degeneration

PubMed Central

Cohen, Miriam H.; Carton, Amelia M.; Hardy, Christopher J.; Golden, Hannah L.; Clark, Camilla N.; Fletcher, Phillip D.; Jaisin, Kankamol; Marshall, Charles R.; Henley, Susie M.D.; Rohrer, Jonathan D.; Crutch, Sebastian J.; Warren, Jason D.

2016-01-01

Abstract art may signal emotions independently of a biological or social carrier: it might therefore constitute a test case for defining brain mechanisms of generic emotion decoding and the impact of disease states on those mechanisms. This is potentially of particular relevance to diseases in the frontotemporal lobar degeneration (FTLD) spectrum. These diseases are often led by emotional impairment despite retained or enhanced artistic interest in at least some patients. However, the processing of emotion from art has not been studied systematically in FTLD. Here we addressed this issue using a novel emotional valence matching task on abstract paintings in patients representing major syndromes of FTLD (behavioural variant frontotemporal dementia, n=11; sematic variant primary progressive aphasia (svPPA), n=7; nonfluent variant primary progressive aphasia (nfvPPA), n=6) relative to healthy older individuals (n=39). Performance on art emotion valence matching was compared between groups taking account of perceptual matching performance and assessed in relation to facial emotion matching using customised control tasks. Neuroanatomical correlates of art emotion processing were assessed using voxel-based morphometry of patients' brain MR images. All patient groups had a deficit of art emotion processing relative to healthy controls; there were no significant interactions between syndromic group and emotion modality. Poorer art emotion valence matching performance was associated with reduced grey matter volume in right lateral occopitotemporal cortex in proximity to regions previously implicated in the processing of dynamic visual signals. Our findings suggest that abstract art may be a useful model system for investigating mechanisms of generic emotion decoding and aesthetic processing in neurodegenerative diseases. PMID:26748236

System Dynamics Approach for Critical Infrastructure and Decision Support. A Model for a Potable Water System.

NASA Astrophysics Data System (ADS)

Pasqualini, D.; Witkowski, M.

2005-12-01

The Critical Infrastructure Protection / Decision Support System (CIP/DSS) project, supported by the Science and Technology Office, has been developing a risk-informed Decision Support System that provides insights for making critical infrastructure protection decisions. The system considers seventeen different Department of Homeland Security defined Critical Infrastructures (potable water system, telecommunications, public health, economics, etc.) and their primary interdependencies. These infrastructures have been modeling in one model called CIP/DSS Metropolitan Model. The modeling approach used is a system dynamics modeling approach. System dynamics modeling combines control theory and the nonlinear dynamics theory, which is defined by a set of coupled differential equations, which seeks to explain how the structure of a given system determines its behavior. In this poster we present a system dynamics model for one of the seventeen critical infrastructures, a generic metropolitan potable water system (MPWS). Three are the goals: 1) to gain a better understanding of the MPWS infrastructure; 2) to identify improvements that would help protect MPWS; and 3) to understand the consequences, interdependencies, and impacts, when perturbations occur to the system. The model represents raw water sources, the metropolitan water treatment process, storage of treated water, damage and repair to the MPWS, distribution of water, and end user demand, but does not explicitly represent the detailed network topology of an actual MPWS. The MPWS model is dependent upon inputs from the metropolitan population, energy, telecommunication, public health, and transportation models as well as the national water and transportation models. We present modeling results and sensitivity analysis indicating critical choke points, negative and positive feedback loops in the system. A general scenario is also analyzed where the potable water system responds to a generic disruption.

Evaluation of 3D-Jury on CASP7 models.

PubMed

Kaján, László; Rychlewski, Leszek

2007-08-21

3D-Jury, the structure prediction consensus method publicly available in the Meta Server http://meta.bioinfo.pl/, was evaluated using models gathered in the 7th round of the Critical Assessment of Techniques for Protein Structure Prediction (CASP7). 3D-Jury is an automated expert process that generates protein structure meta-predictions from sets of models obtained from partner servers. The performance of 3D-Jury was analysed for three aspects. First, we examined the correlation between the 3D-Jury score and a model quality measure: the number of correctly predicted residues. The 3D-Jury score was shown to correlate significantly with the number of correctly predicted residues, the correlation is good enough to be used for prediction. 3D-Jury was also found to improve upon the competing servers' choice of the best structure model in most cases. The value of the 3D-Jury score as a generic reliability measure was also examined. We found that the 3D-Jury score separates bad models from good models better than the reliability score of the original server in 27 cases and falls short of it in only 5 cases out of a total of 38. We report the release of a new Meta Server feature: instant 3D-Jury scoring of uploaded user models. The 3D-Jury score continues to be a good indicator of structural model quality. It also provides a generic reliability score, especially important for models that were not assigned such by the original server. Individual structure modellers can also benefit from the 3D-Jury scoring system by testing their models in the new instant scoring feature http://meta.bioinfo.pl/compare_your_model_example.pl available in the Meta Server.

X-ray Characterization and Defect Control of III-Nitrides

NASA Astrophysics Data System (ADS)

Tweedie, James

A process for controlling point defects in a semiconductor using excess charge carriers was developed in theory and practice. A theoretical framework based on first principles was developed to model the effect of excess charge carriers on the formation energy and concentration of charged point defects in a semiconductor. The framework was validated for the completely general case of a generic carrier source and a generic point defect in a generic semiconductor, and then refined for the more specific case of a generic carrier source applied during the growth of a doped semiconductor crystal. It was theoretically demonstrated that the process as defined will always reduce the degree of compensation in the semiconductor. The established theoretical framework was applied to the case of above-bandgap illumination on both the MOCVD growth and the post-growth annealing of Mg-doped GaN thin films. It was theoretically demonstrated that UV light will lower the concentration of compensating defects during growth and will facilitate complete activation of the Mg acceptor at lower annealing temperatures. Annealing experiments demonstrated that UV illumination of GaN:Mg thin films during annealing lowers the resistivity of the film at any given temperature below the 650 °C threshold at which complete activation is achieved without illumination. Broad spectrum analysis of the photoluminescence (PL) spectra together with a correlation between the acceptor-bound exciton transition and room temperature resistivity demonstrated that UV light only acts to enhance the activation Mg. Surface chemistry and interface chemistry of AlN and high Al mole fraction AlGaN films were studied using x-ray photoelectron spectroscopy (XPS). It was seen that surfaces readily form stable surface oxides. The Schottky barrier height (SBH) of various metals contacted to these surfaces was using XPS. Finally, an x-ray diffraction method (XRD) was developed to quantify strain and composition of alloy films in the context of a processing environment. Reciprocal space mapping revealed intensity limitations on the accuracy of the method. The method was used to demonstrate a bimodal strain distribution across the composition spectrum for 200 nm AlGaN thin films grown on GaN. A weak, linear strain dependence on composition was observed for Al mole fractions below 30%. Above this threshold the films were observed to be completely relaxed by cracking.

Preliminary Analysis of Assessment Instrument Design to Reveal Science Generic Skill and Chemistry Literacy

ERIC Educational Resources Information Center

Sumarni, Woro; Sudarmin; Supartono, Wiyanto

2016-01-01

The purpose of this research is to design assessment instrument to evaluate science generic skill (SGS) achievement and chemistry literacy in ethnoscience-integrated chemistry learning. The steps of tool designing refers to Plomp models including 1) Investigation Phase (Prelimenary Investigation); 2) Designing Phase (Design); 3)…

Generic tripartite Bell nonlocality sudden death under local phase noise

NASA Astrophysics Data System (ADS)

Ann, Kevin; Jaeger, Gregg

2008-11-01

We definitively show, using an explicit and broadly applicable model, that local phase noise that is capable of eliminating state coherence only in the infinite-time limit is capable of eliminating nonlocality in finite time in three two-level systems prepared in the Bell-nonlocal tripartite states of the generic entanglement class.

A multi-site cognitive task analysis for biomedical query mediation.

PubMed

Hruby, Gregory W; Rasmussen, Luke V; Hanauer, David; Patel, Vimla L; Cimino, James J; Weng, Chunhua

2016-09-01

To apply cognitive task analyses of the Biomedical query mediation (BQM) processes for EHR data retrieval at multiple sites towards the development of a generic BQM process model. We conducted semi-structured interviews with eleven data analysts from five academic institutions and one government agency, and performed cognitive task analyses on their BQM processes. A coding schema was developed through iterative refinement and used to annotate the interview transcripts. The annotated dataset was used to reconstruct and verify each BQM process and to develop a harmonized BQM process model. A survey was conducted to evaluate the face and content validity of this harmonized model. The harmonized process model is hierarchical, encompassing tasks, activities, and steps. The face validity evaluation concluded the model to be representative of the BQM process. In the content validity evaluation, out of the 27 tasks for BQM, 19 meet the threshold for semi-valid, including 3 fully valid: "Identify potential index phenotype," "If needed, request EHR database access rights," and "Perform query and present output to medical researcher", and 8 are invalid. We aligned the goals of the tasks within the BQM model with the five components of the reference interview. The similarity between the process of BQM and the reference interview is promising and suggests the BQM tasks are powerful for eliciting implicit information needs. We contribute a BQM process model based on a multi-site study. This model promises to inform the standardization of the BQM process towards improved communication efficiency and accuracy. Copyright © 2016 Elsevier Ireland Ltd. All rights reserved.

A Multi-Site Cognitive Task Analysis for Biomedical Query Mediation

PubMed Central

Hruby, Gregory W.; Rasmussen, Luke V.; Hanauer, David; Patel, Vimla; Cimino, James J.; Weng, Chunhua

2016-01-01

Objective To apply cognitive task analyses of the Biomedical query mediation (BQM) processes for EHR data retrieval at multiple sites towards the development of a generic BQM process model. Materials and Methods We conducted semi-structured interviews with eleven data analysts from five academic institutions and one government agency, and performed cognitive task analyses on their BQM processes. A coding schema was developed through iterative refinement and used to annotate the interview transcripts. The annotated dataset was used to reconstruct and verify each BQM process and to develop a harmonized BQM process model. A survey was conducted to evaluate the face and content validity of this harmonized model. Results The harmonized process model is hierarchical, encompassing tasks, activities, and steps. The face validity evaluation concluded the model to be representative of the BQM process. In the content validity evaluation, out of the 27 tasks for BQM, 19 meet the threshold for semi-valid, including 3 fully valid: “Identify potential index phenotype,” “If needed, request EHR database access rights,” and “Perform query and present output to medical researcher”, and 8 are invalid. Discussion We aligned the goals of the tasks within the BQM model with the five components of the reference interview. The similarity between the process of BQM and the reference interview is promising and suggests the BQM tasks are powerful for eliciting implicit information needs. Conclusions We contribute a BQM process model based on a multi-site study. This model promises to inform the standardization of the BQM process towards improved communication efficiency and accuracy. PMID:27435950

A physically-based earthquake recurrence model for estimation of long-term earthquake probabilities

USGS Publications Warehouse

Ellsworth, William L.; Matthews, Mark V.; Nadeau, Robert M.; Nishenko, Stuart P.; Reasenberg, Paul A.; Simpson, Robert W.

1999-01-01

A physically-motivated model for earthquake recurrence based on the Brownian relaxation oscillator is introduced. The renewal process defining this point process model can be described by the steady rise of a state variable from the ground state to failure threshold as modulated by Brownian motion. Failure times in this model follow the Brownian passage time (BPT) distribution, which is specified by the mean time to failure, μ, and the aperiodicity of the mean, α (equivalent to the familiar coefficient of variation). Analysis of 37 series of recurrent earthquakes, M -0.7 to 9.2, suggests a provisional generic value of α = 0.5. For this value of α, the hazard function (instantaneous failure rate of survivors) exceeds the mean rate for times > μ⁄2, and is ~ ~ 2 ⁄ μ for all times > μ. Application of this model to the next M 6 earthquake on the San Andreas fault at Parkfield, California suggests that the annual probability of the earthquake is between 1:10 and 1:13.

Thermal Modeling and Analysis of a Cryogenic Tank Design Exposed to Extreme Heating Profiles

NASA Technical Reports Server (NTRS)

Stephens, Craig A.; Hanna, Gregory J.

1991-01-01

A cryogenic test article, the Generic Research Cryogenic Tank, was designed to qualitatively simulate the thermal response of transatmospheric vehicle fuel tanks exposed to the environment of hypersonic flight. One-dimensional and two-dimensional finite-difference thermal models were developed to simulate the thermal response and assist in the design of the Generic Research Cryogenic Tank. The one-dimensional thermal analysis determined the required insulation thickness to meet the thermal design criteria and located the purge jacket to eliminate the liquefaction of air. The two-dimensional thermal analysis predicted the temperature gradients developed within the pressure-vessel wall, estimated the cryogen boiloff, and showed the effects the ullage condition has on pressure-vessel temperatures. The degree of ullage mixing, location of the applied high-temperature profile, and the purge gas influence on insulation thermal conductivity had significant effects on the thermal behavior of the Generic Research Cryogenic Tank. In addition to analysis results, a description of the Generic Research Cryogenic Tank and the role it will play in future thermal structures and transatmospheric vehicle research at the NASA Dryden Flight Research Facility is presented.

Selective inhibition of a multicomponent response can be achieved without cost

PubMed Central

Westrick, Zachary; Ivry, Richard B.

2014-01-01

Behavioral flexibility frequently requires the ability to modify an on-going action. In some situations, optimal performance requires modifying some components of an on-going action without interrupting other components of that action. This form of control has been studied with the selective stop-signal task, in which participants are instructed to abort only one movement of a multicomponent response. Previous studies have shown a transient disruption of the nonaborted component, suggesting limitations in our ability to use selective inhibition. This cost has been attributed to a structural limitation associated with the recruitment of a cortico-basal ganglia pathway that allows for the rapid inhibition of action but operates in a relatively generic manner. Using a model-based approach, we demonstrate that, with a modest amount of training and highly compatible stimulus-response mappings, people can perform a selective-stop task without any cost on the nonaborted component. Prior reports of behavioral costs in selective-stop tasks reflect, at least in part, a sampling bias in the method commonly used to estimate such costs. These results suggest that inhibition can be selectively controlled and present a challenge for models of inhibitory control that posit the operation of generic processes. PMID:25339712

Charge loss (or the lack thereof) for AdS black holes

NASA Astrophysics Data System (ADS)

Ong, Yen Chin; Chen, Pisin

2014-06-01

The evolution of evaporating charged black holes is complicated to model in general, but is nevertheless important since the hints to the Information Loss Paradox and its recent firewall incarnation may lie in understanding more generic geometries than that of Schwarzschild spacetime. Fortunately, for sufficiently large asymptotically flat Reissner-Nordström black holes, the evaporation process can be modeled via a system of coupled linear ordinary differential equations, with charge loss rate governed by Schwinger pair-production process. The same model can be generalized to study the evaporation of AdS Reissner-Nordström black holes with flat horizon. It was recently found that such black holes always evolve towards extremality since charge loss is inefficient. This property is completely opposite to the asymptotically flat case in which the black hole eventually loses its charges and tends towards Schwarzschild limit. We clarify the underlying reason for this different behavior.

DigR: a generic model and its open source simulation software to mimic three-dimensional root-system architecture diversity.

PubMed

Barczi, Jean-François; Rey, Hervé; Griffon, Sébastien; Jourdan, Christophe

2018-04-18

Many studies exist in the literature dealing with mathematical representations of root systems, categorized, for example, as pure structure description, partial derivative equations or functional-structural plant models. However, in these studies, root architecture modelling has seldom been carried out at the organ level with the inclusion of environmental influences that can be integrated into a whole plant characterization. We have conducted a multidisciplinary study on root systems including field observations, architectural analysis, and formal and mathematical modelling. This integrative and coherent approach leads to a generic model (DigR) and its software simulator. Architecture analysis applied to root systems helps at root type classification and architectural unit design for each species. Roots belonging to a particular type share dynamic and morphological characteristics which consist of topological and geometric features. The DigR simulator is integrated into the Xplo environment, with a user interface to input parameter values and make output ready for dynamic 3-D visualization, statistical analysis and saving to standard formats. DigR is simulated in a quasi-parallel computing algorithm and may be used either as a standalone tool or integrated into other simulation platforms. The software is open-source and free to download at http://amapstudio.cirad.fr/soft/xplo/download. DigR is based on three key points: (1) a root-system architectural analysis, (2) root type classification and modelling and (3) a restricted set of 23 root type parameters with flexible values indexed in terms of root position. Genericity and botanical accuracy of the model is demonstrated for growth, branching, mortality and reiteration processes, and for different root architectures. Plugin examples demonstrate the model's versatility at simulating plastic responses to environmental constraints. Outputs of the model include diverse root system structures such as tap-root, fasciculate, tuberous, nodulated and clustered root systems. DigR is based on plant architecture analysis which leads to specific root type classification and organization that are directly linked to field measurements. The open source simulator of the model has been included within a friendly user environment. DigR accuracy and versatility are demonstrated for growth simulations of complex root systems for both annual and perennial plants.

Main Reasons for Registration Application Refusal of Generic and Similar Pharmaceutical Drug Products by the Brazilian Health Regulatory Agency (ANVISA).

PubMed

do Carmo, Ana Cerúlia Moraes; Piras, Stefânia Schimaneski; Rocha, Nayrton Flávio Moura; Gratieri, Tais

2017-01-01

Objective . The marketing authorization of generic and similar pharmaceutical drug products involves the analysis of proposing company's administrative aspects as well as drug product technical description and scientific evaluations. This study evaluated the main reasons for registration refusal of generic and similar pharmaceutical drug products in Brazil. The aim is to help future applicants to better organize the proposal. Methods . A retrospective search of drug products registration processes was performed on the Brazilian Government Official Gazette from January 1, 2015, and December 31, 2015. Results . Drug product quality control, drug product stability study, deadline accomplishment, API quality control made by drug manufacturer, active pharmaceutical ingredient (API), and production report were the main reasons for marketing authorization application refusal of generic and similar pharmaceutical drug products in 2015. Conclusion . Disclosure of the reasons behind failed applications is a step forward on regulatory transparency. Sharing of experiences is essential to international regulatory authorities and organizations to improve legislation requirements for the marketing authorization of generic and similar pharmaceutical drug products.

Generics Substitution, Bioequivalence Standards, and International Oversight: Complex Issues Facing the FDA.

PubMed

Bate, Roger; Mathur, Aparna; Lever, Harry M; Thakur, Dinesh; Graedon, Joe; Cooperman, Tod; Mason, Preston; Fox, Erin R

2016-03-01

The regulations for assessing the quality of generic drugs and their bioequivalence to innovator products are outdated and need to be substantially modernized. There are multiple reasons why these changes are needed, including: (i) the regulations remain largely unchanged since the passage of the Hatch-Waxman Act in 1984; (ii) medication therapies have become substantially more complex over the three decades since the passage of the Act; (iii) a switch from an innovator drug to a generic drug, or switching from one generic to another, is not a benign process - there is substantial clinical professional judgment involved and in some instances these decisions should be better informed; and (iv) pharmaceutical ingredients for finished products, whether innovator or generic, are from multiple sources of supply, adding variability in their production, and which may not be accounted for in specification tolerances. When these elements are viewed together, they clearly suggest that more transparency of responsible manufacturers in product labels and updated standards for bioequivalence are required. Copyright © 2015 Elsevier Ltd. All rights reserved.

Main Reasons for Registration Application Refusal of Generic and Similar Pharmaceutical Drug Products by the Brazilian Health Regulatory Agency (ANVISA)

PubMed Central

do Carmo, Ana Cerúlia Moraes; Piras, Stefânia Schimaneski; Rocha, Nayrton Flávio Moura

2017-01-01

Objective. The marketing authorization of generic and similar pharmaceutical drug products involves the analysis of proposing company's administrative aspects as well as drug product technical description and scientific evaluations. This study evaluated the main reasons for registration refusal of generic and similar pharmaceutical drug products in Brazil. The aim is to help future applicants to better organize the proposal. Methods. A retrospective search of drug products registration processes was performed on the Brazilian Government Official Gazette from January 1, 2015, and December 31, 2015. Results. Drug product quality control, drug product stability study, deadline accomplishment, API quality control made by drug manufacturer, active pharmaceutical ingredient (API), and production report were the main reasons for marketing authorization application refusal of generic and similar pharmaceutical drug products in 2015. Conclusion. Disclosure of the reasons behind failed applications is a step forward on regulatory transparency. Sharing of experiences is essential to international regulatory authorities and organizations to improve legislation requirements for the marketing authorization of generic and similar pharmaceutical drug products. PMID:28280742

High-resolution modelling of waves, currents and sediment transport in the Catalan Sea.

NASA Astrophysics Data System (ADS)

Sánchez-Arcilla, Agustín; Grifoll, Manel; Pallares, Elena; Espino, Manuel

2013-04-01

In order to investigate coastal shelf dynamics, a sequence of high resolution multi-scale models have been implemented for the Catalan shelf (North-western Mediterranean Sea). The suite consists of a set of increasing-resolution nested models, based on the circulation model ROMS (Regional Ocean Modelling System), the wave model SWAN (Simulation Waves Nearshore) and the sediment transport model CSTM (Community Sediment Transport Model), covering different ranges of spatial (from ~1 km at shelf-slope regions to ~40 m around river mouth or local beaches) and temporal scales (from storms events to seasonal variability). Contributions in the understanding of local processes such as along-shelf dynamics in the inner-shelf, sediment dispersal from the river discharge or bi-directional wave-current interactions under different synoptic conditions and resolution have been obtained using the Catalan Coast as a pilot site. Numerical results have been compared with "ad-hoc" intensive field campaigns, data from observational models and remote sensing products. The results exhibit acceptable agreement with observations and the investigation has allowed developing generic knowledge and more efficient (process-based) strategies for the coastal and shelf management.

Methods, strengths, weaknesses, and limitations of bioequivalence tests with special regard to immunosuppressive drugs.

PubMed

van Gelder, Teun; Gabardi, Steven

2013-08-01

Within the field of solid organ transplantation, the patents for a number of immunosuppressive drugs have expired in the last few years. Tacrolimus, cyclosporine, and mycophenolate mofetil are now available as generic drugs. In some countries, the market penetration of these generic formulations is as high as 70%, whereas in some other countries, this figure is below 10%. Several professional societies have published position papers on the risks and benefits of generic substitution of immunosuppressive drugs. It often appears that transplant professionals are not fully aware of the requirements for registration of generic drugs. This article describes the registration requirements with a focus on bioequivalence testing, the strengths and weaknesses in this process, and the differences between Europe and the US. © 2013 The Authors Transplant International © 2013 European Society for Organ Transplantation. Published by Blackwell Publishing Ltd.

Design of experiments enhanced statistical process control for wind tunnel check standard testing

NASA Astrophysics Data System (ADS)

Phillips, Ben D.

The current wind tunnel check standard testing program at NASA Langley Research Center is focused on increasing data quality, uncertainty quantification and overall control and improvement of wind tunnel measurement processes. The statistical process control (SPC) methodology employed in the check standard testing program allows for the tracking of variations in measurements over time as well as an overall assessment of facility health. While the SPC approach can and does provide researchers with valuable information, it has certain limitations in the areas of process improvement and uncertainty quantification. It is thought by utilizing design of experiments methodology in conjunction with the current SPC practices that one can efficiently and more robustly characterize uncertainties and develop enhanced process improvement procedures. In this research, methodologies were developed to generate regression models for wind tunnel calibration coefficients, balance force coefficients and wind tunnel flow angularities. The coefficients of these regression models were then tracked in statistical process control charts, giving a higher level of understanding of the processes. The methodology outlined is sufficiently generic such that this research can be applicable to any wind tunnel check standard testing program.

An informatics model for guiding assembly of telemicrobiology workstations for malaria collaborative diagnostics using commodity products and open-source software.

PubMed

Suhanic, West; Crandall, Ian; Pennefather, Peter

2009-07-17

Deficits in clinical microbiology infrastructure exacerbate global infectious disease burdens. This paper examines how commodity computation, communication, and measurement products combined with open-source analysis and communication applications can be incorporated into laboratory medicine microbiology protocols. Those commodity components are all now sourceable globally. An informatics model is presented for guiding the use of low-cost commodity components and free software in the assembly of clinically useful and usable telemicrobiology workstations. The model incorporates two general principles: 1) collaborative diagnostics, where free and open communication and networking applications are used to link distributed collaborators for reciprocal assistance in organizing and interpreting digital diagnostic data; and 2) commodity engineering, which leverages globally available consumer electronics and open-source informatics applications, to build generic open systems that measure needed information in ways substantially equivalent to more complex proprietary systems. Routine microscopic examination of Giemsa and fluorescently stained blood smears for diagnosing malaria is used as an example to validate the model. The model is used as a constraint-based guide for the design, assembly, and testing of a functioning, open, and commoditized telemicroscopy system that supports distributed acquisition, exploration, analysis, interpretation, and reporting of digital microscopy images of stained malarial blood smears while also supporting remote diagnostic tracking, quality assessment and diagnostic process development. The open telemicroscopy workstation design and use-process described here can address clinical microbiology infrastructure deficits in an economically sound and sustainable manner. It can boost capacity to deal with comprehensive measurement of disease and care outcomes in individuals and groups in a distributed and collaborative fashion. The workstation enables local control over the creation and use of diagnostic data, while allowing for remote collaborative support of diagnostic data interpretation and tracking. It can enable global pooling of malaria disease information and the development of open, participatory, and adaptable laboratory medicine practices. The informatic model highlights how the larger issue of access to generic commoditized measurement, information processing, and communication technology in both high- and low-income countries can enable diagnostic services that are much less expensive, but substantially equivalent to those currently in use in high-income countries.

Evaluation of 3D-Jury on CASP7 models

PubMed Central

Kaján, László; Rychlewski, Leszek

2007-01-01

Background 3D-Jury, the structure prediction consensus method publicly available in the Meta Server , was evaluated using models gathered in the 7th round of the Critical Assessment of Techniques for Protein Structure Prediction (CASP7). 3D-Jury is an automated expert process that generates protein structure meta-predictions from sets of models obtained from partner servers. Results The performance of 3D-Jury was analysed for three aspects. First, we examined the correlation between the 3D-Jury score and a model quality measure: the number of correctly predicted residues. The 3D-Jury score was shown to correlate significantly with the number of correctly predicted residues, the correlation is good enough to be used for prediction. 3D-Jury was also found to improve upon the competing servers' choice of the best structure model in most cases. The value of the 3D-Jury score as a generic reliability measure was also examined. We found that the 3D-Jury score separates bad models from good models better than the reliability score of the original server in 27 cases and falls short of it in only 5 cases out of a total of 38. We report the release of a new Meta Server feature: instant 3D-Jury scoring of uploaded user models. Conclusion The 3D-Jury score continues to be a good indicator of structural model quality. It also provides a generic reliability score, especially important for models that were not assigned such by the original server. Individual structure modellers can also benefit from the 3D-Jury scoring system by testing their models in the new instant scoring feature available in the Meta Server. PMID:17711571

Rapidly rotating spacetimes and collisional super-Penrose process

NASA Astrophysics Data System (ADS)

Zaslavskii, O. B.

2016-05-01

We consider generic axially symmetric rotating spacetimes and examine particle collisions in the ergoregion. The results are generic and agree with those obtained in the particular case of the rotating Teo wormhole in Tsukamoto and Bambi, Phys Rev D 91:104040, 2015. It is shown that for sufficiently rapid rotation, the energy of a particle escaping to infinity can become arbitrary large (so-called super-Penrose process). Moreover, this energy is typically much larger than the center-of mass energy of colliding particles. In this sense the situation differs radically from that for collisions near black holes.

Automated analysis in generic groups

NASA Astrophysics Data System (ADS)

Fagerholm, Edvard

This thesis studies automated methods for analyzing hardness assumptions in generic group models, following ideas of symbolic cryptography. We define a broad class of generic and symbolic group models for different settings---symmetric or asymmetric (leveled) k-linear groups --- and prove ''computational soundness'' theorems for the symbolic models. Based on this result, we formulate a master theorem that relates the hardness of an assumption to solving problems in polynomial algebra. We systematically analyze these problems identifying different classes of assumptions and obtain decidability and undecidability results. Then, we develop automated procedures for verifying the conditions of our master theorems, and thus the validity of hardness assumptions in generic group models. The concrete outcome is an automated tool, the Generic Group Analyzer, which takes as input the statement of an assumption, and outputs either a proof of its generic hardness or shows an algebraic attack against the assumption. Structure-preserving signatures are signature schemes defined over bilinear groups in which messages, public keys and signatures are group elements, and the verification algorithm consists of evaluating ''pairing-product equations''. Recent work on structure-preserving signatures studies optimality of these schemes in terms of the number of group elements needed in the verification key and the signature, and the number of pairing-product equations in the verification algorithm. While the size of keys and signatures is crucial for many applications, another aspect of performance is the time it takes to verify a signature. The most expensive operation during verification is the computation of pairings. However, the concrete number of pairings is not captured by the number of pairing-product equations considered in earlier work. We consider the question of what is the minimal number of pairing computations needed to verify structure-preserving signatures. We build an automated tool to search for structure-preserving signatures matching a template. Through exhaustive search we conjecture lower bounds for the number of pairings required in the Type~II setting and prove our conjecture to be true. Finally, our tool exhibits examples of structure-preserving signatures matching the lower bounds, which proves tightness of our bounds, as well as improves on previously known structure-preserving signature schemes.

Price regulation and generic competition in the pharmaceutical market.

PubMed

Dalen, Dag Morten; Strøm, Steinar; Haabeth, Tonje

2006-09-01

In March 2003 the Norwegian government implemented yardstick-based price regulation schemes on a selection of drugs subjected to generic competition. The retail price cap, termed the "index price," on a drug (chemical substance) was set equal to the average of the three lowest producer prices on that drug, plus a fixed wholesale and retail margin. This is supposed to lower barriers of entry for generic drugs and to trigger price competition. Using monthly data over the period 1998-2004 for the six drugs (chemical entities) included in the index price system, we estimate a structural model enabling us to examine the impact of the reform on both demand and market power. Our results suggest that the index price helped to increase the market shares of generic drugs and succeeded in triggering price competition.

Active and passive surveillance of enoxaparin generics: a case study relevant to biosimilars.

PubMed

Grampp, Gustavo; Bonafede, Machaon; Felix, Thomas; Li, Edward; Malecki, Michael; Sprafka, J Michael

2015-03-01

This retrospective analysis assessed the capability of active and passive safety surveillance systems to track product-specific safety events in the USA for branded and generic enoxaparin, a complex injectable subject to immune-related and other adverse events (AEs). Analysis of heparin-induced thrombocytopenia (HIT) incidence was performed on benefit claims for commercial and Medicare supplemental-insured individuals newly treated with enoxaparin under pharmacy benefit (1 January 2009 - 30 June 2012). Additionally, spontaneous reports from the FDA AE Reporting System were reviewed to identify incidence and attribution of enoxaparin-related reports to specific manufacturers. Specific, dispensed products were identifiable from National Drug Codes only in pharmacy-benefit databases, permitting sensitive comparison of HIT incidence in nearly a third of patients treated with brand or generic enoxaparin. After originator medicine's loss of exclusivity, only 5% of spontaneous reports were processed by generic manufacturers; reports attributable to specific generics were approximately ninefold lower than expected based on market share. Claims data were useful for active surveillance of enoxaparin generics dispensed under pharmacy benefits but not for products administered under medical benefits. These findings suggest that the current spontaneous reporting system will not distinguish product-specific safety signals for products distributed by multiple manufacturers, including biosimilars.

The crisis in access to essential medicines in India: key issues which call for action.

PubMed

Bhargava, Anurag; Kalantri, S P

2013-01-01

The government is planning to introduce free generic and essential medicines in public health facilities. Most people in India buy healthcare from the private sector, a compulsion that accounts for a high proportion of healthcare-related expenditure. To reduce the burden of healthcare costs, the government must improve availability and affordability of generic and essential medicines in the market. It can do so because India's large pharmaceutical industry is a major source of generic medicines worldwide. In this article, we discuss three factors that have impeded access to generic and essential medicines: (1) mistaken notions among policymakers, prescribers and patients about branded drugs and generic drugs in India; (2) high prices of medicines due to the progressive dismantling of the system of regulation of medicine prices, and (3) a drug approval and regulatory system that allows medicines (including fixed dose combinations) of doubtful efficacy, rationale, safety and public health relevance to dominate the market at the cost of access to affordable generic and essential medicines. The consequences of ill-health and wasted expenditure on drugs raise issues of public health ethics.Improving access to essential medicines in India is an urgent public health and ethical imperative. This should include improved public provisioning, a system of regulation of drug prices, and an evidence-based drug approval process.

A generic multi-flex-body dynamics, controls simulation tool for space station

NASA Technical Reports Server (NTRS)

London, Ken W.; Lee, John F.; Singh, Ramen P.; Schubele, Buddy

1991-01-01

An order (n) multiflex body Space Station simulation tool is introduced. The flex multibody modeling is generic enough to model all phases of Space Station from build up through to Assembly Complete configuration and beyond. Multibody subsystems such as the Mobile Servicing System (MSS) undergoing a prescribed translation and rotation are also allowed. The software includes aerodynamic, gravity gradient, and magnetic field models. User defined controllers can be discrete or continuous. Extensive preprocessing of 'body by body' NASTRAN flex data is built in. A significant aspect, too, is the integrated controls design capability which includes model reduction and analytic linearization.

Reference pricing with endogenous generic entry.

PubMed

Brekke, Kurt R; Canta, Chiara; Straume, Odd Rune

2016-12-01

Reference pricing intends to reduce pharmaceutical expenditures by increasing demand elasticity and stimulating generic competition. We develop a novel model where a brand-name producer competes in prices with several generics producers in a market with brand-biased and brand-neutral consumers. Comparing with coinsurance, we show that reference pricing, contrary to policy makers' intentions, discourages generic entry, as it induces the brand-name producer to price more aggressively. Thus, the net effect of reference pricing on drug prices is ambiguous, implying that reference pricing can be counterproductive in reducing expenditures. However, under price regulation, we show that reference pricing may stimulate generic entry, since a binding price cap weakens the aggressive price response by the brand-name producer. This may explain mixed empirical results on the competitive effects of reference pricing. Finally, we show that reference pricing may be welfare improving when accounting for brand preferences despite its adverse effects on entry and prices. Copyright © 2016 Elsevier B.V. All rights reserved.

Descriptive Model of Generic WAMS

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hauer, John F.; DeSteese, John G.

The Department of Energy’s (DOE) Transmission Reliability Program is supporting the research, deployment, and demonstration of various wide area measurement system (WAMS) technologies to enhance the reliability of the Nation’s electrical power grid. Pacific Northwest National Laboratory (PNNL) was tasked by the DOE National SCADA Test Bed Program to conduct a study of WAMS security. This report represents achievement of the milestone to develop a generic WAMS model description that will provide a basis for the security analysis planned in the next phase of this study.

Bethe states of the trigonometric SU(3) spin chain with generic open boundaries

NASA Astrophysics Data System (ADS)

Sun, Pei; Xin, Zhirong; Qiao, Yi; Wen, Fakai; Hao, Kun; Cao, Junpeng; Li, Guang-Liang; Yang, Tao; Yang, Wen-Li; Shi, Kangjie

2018-06-01

By combining the algebraic Bethe ansatz and the off-diagonal Bethe ansatz, we investigate the trigonometric SU (3) model with generic open boundaries. The eigenvalues of the transfer matrix are given in terms of an inhomogeneous T - Q relation, and the corresponding eigenstates are expressed in terms of nested Bethe-type eigenstates which have well-defined homogeneous limit. This exact solution provides a basis for further analyzing the thermodynamic properties and correlation functions of the anisotropic models associated with higher rank algebras.

Impacts of supersymmetric higher derivative terms on inflation models in supergravity

DOE Office of Scientific and Technical Information (OSTI.GOV)

Aoki, Shuntaro; Yamada, Yusuke, E-mail: shun-soccer@akane.waseda.jp, E-mail: yuusuke-yamada@asagi.waseda.jp

2015-07-01

We show the effects of supersymmetric higher derivative terms on inflation models in supergravity. The results show that such terms generically modify the effective kinetic coefficient of the inflaton during inflation if the cut off scale of the higher derivative operators is sufficiently small. In such a case, the η-problem in supergravity does not occur, and we find that the effective potential of the inflaton generically becomes a power type potential with a power smaller than two.

Fast simulation of reconstructed phylogenies under global time-dependent birth-death processes.

PubMed

Höhna, Sebastian

2013-06-01

Diversification rates and patterns may be inferred from reconstructed phylogenies. Both the time-dependent and the diversity-dependent birth-death process can produce the same observed patterns of diversity over time. To develop and test new models describing the macro-evolutionary process of diversification, generic and fast algorithms to simulate under these models are necessary. Simulations are not only important for testing and developing models but play an influential role in the assessment of model fit. In the present article, I consider as the model a global time-dependent birth-death process where each species has the same rates but rates may vary over time. For this model, I derive the likelihood of the speciation times from a reconstructed phylogenetic tree and show that each speciation event is independent and identically distributed. This fact can be used to simulate efficiently reconstructed phylogenetic trees when conditioning on the number of species, the time of the process or both. I show the usability of the simulation by approximating the posterior predictive distribution of a birth-death process with decreasing diversification rates applied on a published bird phylogeny (family Cettiidae). The methods described in this manuscript are implemented in the R package TESS, available from the repository CRAN (http://cran.r-project.org/web/packages/TESS/). Supplementary data are available at Bioinformatics online.

Mapping Turnaround Times (TAT) to a Generic Timeline: A Systematic Review of TAT Definitions in Clinical Domains

PubMed Central

2011-01-01

Background Assessing turnaround times can help to analyse workflows in hospital information systems. This paper presents a systematic review of literature concerning different turnaround time definitions. Our objectives were to collect relevant literature with respect to this kind of process times in hospitals and their respective domains. We then analysed the existing definitions and summarised them in an appropriate format. Methods Our search strategy was based on Pubmed queries and manual reviews of the bibliographies of retrieved articles. Studies were included if precise definitions of turnaround times were available. A generic timeline was designed through a consensus process to provide an overview of these definitions. Results More than 1000 articles were analysed and resulted in 122 papers. Of those, 162 turnaround time definitions in different clinical domains were identified. Starting and end points vary between these domains. To illustrate those turnaround time definitions, a generic timeline was constructed using preferred terms derived from the identified definitions. The consensus process resulted in the following 15 terms: admission, order, biopsy/examination, receipt of specimen in laboratory, procedure completion, interpretation, dictation, transcription, verification, report available, delivery, physician views report, treatment, discharge and discharge letter sent. Based on this analysis, several standard terms for turnaround time definitions are proposed. Conclusion Using turnaround times to benchmark clinical workflows is still difficult, because even within the same clinical domain many different definitions exist. Mapping of turnaround time definitions to a generic timeline is feasible. PMID:21609424

Ontology-Driven Business Modelling: Improving the Conceptual Representation of the REA Ontology

NASA Astrophysics Data System (ADS)

Gailly, Frederik; Poels, Geert

Business modelling research is increasingly interested in exploring how domain ontologies can be used as reference models for business models. The Resource Event Agent (REA) ontology is a primary candidate for ontology-driven modelling of business processes because the REA point of view on business reality is close to the conceptual modelling perspective on business models. In this paper Ontology Engineering principles are employed to reengineer REA in order to make it more suitable for ontology-driven business modelling. The new conceptual representation of REA that we propose uses a single representation formalism, includes a more complete domain axiomatizat-ion (containing definitions of concepts, concept relations and ontological axioms), and is proposed as a generic model that can be instantiated to create valid business models. The effects of these proposed improvements on REA-driven business modelling are demonstrated using a business modelling example.

Orbital construction support equipment

NASA Technical Reports Server (NTRS)

1977-01-01

Approximately 200 separate construction steps were defined for the three solar power satellite (SPS) concepts. Detailed construction scenarios were developed which describe the specific tasks to be accomplished, and identify general equipment requirements. The scenarios were used to perform a functional analysis, which resulted in the definition of 100 distinct SPS elements. These elements are the components, parts, subsystems, or assemblies upon which construction activities take place. The major SPS elements for each configuration are shown. For those elements, 300 functional requirements were identified in seven generic processes. Cumulatively, these processes encompass all functions required during SPS construction/assembly. Individually each process is defined such that it includes a specific type of activity. Each SPS element may involve activities relating to any or all of the generic processes. The processes are listed, and examples of the requirements defined for a typical element are given.

German dentists' websites on periodontitis have low quality of information.

PubMed

Schwendicke, Falk; Stange, Jörg; Stange, Claudia; Graetz, Christian

2017-08-02

The internet is an increasingly relevant source of health information. We aimed to assess the quality of German dentists' websites on periodontitis, hypothesizing that it was significantly associated with a number of practice-specific parameters. We searched four electronic search engines and included pages which were freely accessible, posted by a dental practice in Germany, and mentioned periodontal disease/therapy. Websites were assessed for (1) technical and functional aspects, (2) generic quality and risk of bias, (3) disease-specific information. For 1 and 2, validated tools (LIDA/DISCERN) were used for assessment. For 3, we developed a criterion catalogue encompassing items on etiologic and prognostic factors for periodontitis, the diagnostic and treatment process, and the generic chance of tooth retention in periodontitis patients. Inter- and intra-rater reliabilities were largely moderate. Generalized linear modeling was used to assess the association between the information quality (measured as % of maximally available scores) and practice-specific characteristics. Seventy-one websites were included. Technical and functional aspects were reported in significantly higher quality (median: 71%, 25/75th percentiles: 67/79%) than all other aspects (p < 0.05). Generic risk of bias and most disease-specific aspects showed significantly lower reporting quality (median range was 0-40%), with poorest reporting for prognostic factors (9;0/27%), diagnostic process (0;0/33%) and chances of tooth retention (0;0/2%). We found none of the practice-specific parameters to have significant impact on the overall quality of the websites. Most German dentists' websites on periodontitis are not fully trustworthy and relevant information are not or insufficiently considered. There is great need to improve the information quality from such websites at least with regards to periodontitis.

Simulation of an integrated system for the production of methane and single cell protein from biomass

DOE Office of Scientific and Technical Information (OSTI.GOV)

Thomas, M.V.

1989-01-01

A numerical model was developed to simulate the operation of an integrated system for the production of methane and single-cell algal protein from a variety of biomass energy crops or waste streams. Economic analysis was performed at the end of each simulation. The model was capable of assisting in the determination of design parameters by providing relative economic information for various strategies. Three configurations of anaerobic reactors were simulated. These included fed-bed reactors, conventional stirred tank reactors, and continuously expanding reactors. A generic anaerobic digestion process model, using lumped substrate parameters, was developed for use by type-specific reactor models. Themore » generic anaerobic digestion model provided a tool for the testing of conversion efficiencies and kinetic parameters for a wide range of substrate types and reactor designs. Dynamic growth models were used to model the growth of algae and Eichornia crassipes was modeled as a function of daily incident radiation and temperature. The growth of Eichornia crassipes was modeled for the production of biomass as a substrate for digestion. Computer simulations with the system model indicated that tropical or subtropical locations offered the most promise for a viable system. The availability of large quantities of digestible waste and low land prices were found to be desirable in order to take advantage of the economies of scale. Other simulations indicated that poultry and swine manure produced larger biogas yields than cattle manure. The model was created in a modular fashion to allow for testing of a wide variety of unit operations. Coding was performed in the Pascal language for use on personal computers.« less

An Accident Precursor Analysis Process Tailored for NASA Space Systems

NASA Technical Reports Server (NTRS)

Groen, Frank; Stamatelatos, Michael; Dezfuli, Homayoon; Maggio, Gaspare

2010-01-01

Accident Precursor Analysis (APA) serves as the bridge between existing risk modeling activities, which are often based on historical or generic failure statistics, and system anomalies, which provide crucial information about the failure mechanisms that are actually operative in the system and which may differ in frequency or type from those in the various models. These discrepancies between the models (perceived risk) and the system (actual risk) provide the leading indication of an underappreciated risk. This paper presents an APA process developed specifically for NASA Earth-to-Orbit space systems. The purpose of the process is to identify and characterize potential sources of system risk as evidenced by anomalous events which, although not necessarily presenting an immediate safety impact, may indicate that an unknown or insufficiently understood risk-significant condition exists in the system. Such anomalous events are considered accident precursors because they signal the potential for severe consequences that may occur in the future, due to causes that are discernible from their occurrence today. Their early identification allows them to be integrated into the overall system risk model used to intbrm decisions relating to safety.

Manufacturing Cost Levelization Model – A User’s Guide

DOE Office of Scientific and Technical Information (OSTI.GOV)

Morrow, William R.; Shehabi, Arman; Smith, Sarah Josephine

The Manufacturing Cost Levelization Model is a cost-performance techno-economic model that estimates total large-scale manufacturing costs for necessary to produce a given product. It is designed to provide production cost estimates for technology researchers to help guide technology research and development towards an eventual cost-effective product. The model presented in this user’s guide is generic and can be tailored to the manufacturing of any product, including the generation of electricity (as a product). This flexibility, however, requires the user to develop the processes and process efficiencies that represents a full-scale manufacturing facility. The generic model is comprised of several modulesmore » that estimate variable costs (material, labor, and operating), fixed costs (capital & maintenance), financing structures (debt and equity financing), and tax implications (taxable income after equipment and building depreciation, debt interest payments, and expenses) of a notional manufacturing plant. A cash-flow method is used to estimate a selling price necessary for the manufacturing plant to recover its total cost of production. A levelized unit sales price ($ per unit of product) is determined by dividing the net-present value of the manufacturing plant’s expenses ($) by the net present value of its product output. A user defined production schedule drives the cash-flow method that determines the levelized unit price. In addition, an analyst can increase the levelized unit price to include a gross profit margin to estimate a product sales price. This model allows an analyst to understand the effect that any input variables could have on the cost of manufacturing a product. In addition, the tool is able to perform sensitivity analysis, which can be used to identify the key variables and assumptions that have the greatest influence on the levelized costs. This component is intended to help technology researchers focus their research attention on tasks that offer the greatest opportunities for cost reduction early in the research and development stages of technology invention.« less

Patients' Preferences for Generic and Branded Over-the-Counter Medicines: An Adaptive Conjoint Analysis Approach.

PubMed

Halme, Merja; Linden, Kari; Kääriä, Kimmo

2009-12-01

: Despite increased use of generic medicines, little is known about either the attitudes of patients towards them or the decision-making process surrounding them. Young adults use over-the-counter (OTC) analgesics relatively often. : To assess the preferences of patients for generic and branded OTC pain medicines, to identify clusters with different preference structures, and to estimate the price elasticity of a generic alternative among university students. : Finnish university students (n = 256; students in courses at the Helsinki School of Economics) responded to an adaptive conjoint analysis (ACA) questionnaire on the choice between branded and generic OTC ibuprofen products. Product attributes of price, brand, onset time of effect, place of purchase and source of information were included in the questionnaire on the basis of the literature, a focus group and a previous pilot study. Several socioeconomic and health behavior descriptors were employed. Individual-level utility functions were estimated, preference clusters were identified, and the price elasticity of the generic medicine was assessed. : Five clusters with characteristic individual-level preferences and price elasticity but few differences in socioeconomic background were detected. Approximately half of the respondents were strongly price sensitive while the others had other preferences such as brand or an opportunity to buy the medicine at a pharmacy or to have a physician or a pharmacist as an information source. : The study provided new information on the concomitant effects of brand, price and other essential product attributes on the choice by patients between branded and generic medicines.

The social life of cognition.

PubMed

Korman, Joanna; Voiklis, John; Malle, Bertram F

2015-02-01

We begin by illustrating that long before the cognitive revolution, social psychology focused on topics pertaining to what is now known as social cognition: people's subjective interpretations of social situations and the concepts and cognitive processes underlying these interpretations. We then examine two questions: whether social cognition entails characteristic concepts and cognitive processes, and how social processes might themselves shape and constrain cognition. We suggest that social cognition relies heavily on generic cognition but also on unique concepts (e.g., agent, intentionality) and unique processes (e.g., projection, imitation, joint attention). We further suggest that social processes play a prominent role in the development and unfolding of several generic cognitive processes, including learning, attention, and memory. Finally, we comment on the prospects of a recently developing approach to the study of social cognition (social neuroscience) and two potential future directions (computational social cognition and social-cognitive robotics). Copyright © 2014 Elsevier B.V. All rights reserved.

Examining Cybersecurity of Cyberphysical Systems for Critical Infrastructures Through Work Domain Analysis.

PubMed

Wang, Hao; Lau, Nathan; Gerdes, Ryan M

2018-04-01

The aim of this study was to apply work domain analysis for cybersecurity assessment and design of supervisory control and data acquisition (SCADA) systems. Adoption of information and communication technology in cyberphysical systems (CPSs) for critical infrastructures enables automated and distributed control but introduces cybersecurity risk. Many CPSs employ SCADA industrial control systems that have become the target of cyberattacks, which inflict physical damage without use of force. Given that absolute security is not feasible for complex systems, cyberintrusions that introduce unanticipated events will occur; a proper response will in turn require human adaptive ability. Therefore, analysis techniques that can support security assessment and human factors engineering are invaluable for defending CPSs. We conducted work domain analysis using the abstraction hierarchy (AH) to model a generic SCADA implementation to identify the functional structures and means-ends relations. We then adopted a case study approach examining the Stuxnet cyberattack by developing and integrating AHs for the uranium enrichment process, SCADA implementation, and malware to investigate the interactions between the three aspects of cybersecurity in CPSs. The AHs for modeling a generic SCADA implementation and studying the Stuxnet cyberattack are useful for mapping attack vectors, identifying deficiencies in security processes and features, and evaluating proposed security solutions with respect to system objectives. Work domain analysis is an effective analytical method for studying cybersecurity of CPSs for critical infrastructures in a psychologically relevant manner. Work domain analysis should be applied to assess cybersecurity risk and inform engineering and user interface design.

Genetic programming assisted stochastic optimization strategies for optimization of glucose to gluconic acid fermentation.

PubMed

Cheema, Jitender Jit Singh; Sankpal, Narendra V; Tambe, Sanjeev S; Kulkarni, Bhaskar D

2002-01-01

This article presents two hybrid strategies for the modeling and optimization of the glucose to gluconic acid batch bioprocess. In the hybrid approaches, first a novel artificial intelligence formalism, namely, genetic programming (GP), is used to develop a process model solely from the historic process input-output data. In the next step, the input space of the GP-based model, representing process operating conditions, is optimized using two stochastic optimization (SO) formalisms, viz., genetic algorithms (GAs) and simultaneous perturbation stochastic approximation (SPSA). These SO formalisms possess certain unique advantages over the commonly used gradient-based optimization techniques. The principal advantage of the GP-GA and GP-SPSA hybrid techniques is that process modeling and optimization can be performed exclusively from the process input-output data without invoking the detailed knowledge of the process phenomenology. The GP-GA and GP-SPSA techniques have been employed for modeling and optimization of the glucose to gluconic acid bioprocess, and the optimized process operating conditions obtained thereby have been compared with those obtained using two other hybrid modeling-optimization paradigms integrating artificial neural networks (ANNs) and GA/SPSA formalisms. Finally, the overall optimized operating conditions given by the GP-GA method, when verified experimentally resulted in a significant improvement in the gluconic acid yield. The hybrid strategies presented here are generic in nature and can be employed for modeling and optimization of a wide variety of batch and continuous bioprocesses.

Transformation of standardized clinical models based on OWL technologies: from CEM to OpenEHR archetypes

PubMed Central

Legaz-García, María del Carmen; Menárguez-Tortosa, Marcos; Fernández-Breis, Jesualdo Tomás; Chute, Christopher G; Tao, Cui

2015-01-01

Introduction The semantic interoperability of electronic healthcare records (EHRs) systems is a major challenge in the medical informatics area. International initiatives pursue the use of semantically interoperable clinical models, and ontologies have frequently been used in semantic interoperability efforts. The objective of this paper is to propose a generic, ontology-based, flexible approach for supporting the automatic transformation of clinical models, which is illustrated for the transformation of Clinical Element Models (CEMs) into openEHR archetypes. Methods Our transformation method exploits the fact that the information models of the most relevant EHR specifications are available in the Web Ontology Language (OWL). The transformation approach is based on defining mappings between those ontological structures. We propose a way in which CEM entities can be transformed into openEHR by using transformation templates and OWL as common representation formalism. The transformation architecture exploits the reasoning and inferencing capabilities of OWL technologies. Results We have devised a generic, flexible approach for the transformation of clinical models, implemented for the unidirectional transformation from CEM to openEHR, a series of reusable transformation templates, a proof-of-concept implementation, and a set of openEHR archetypes that validate the methodological approach. Conclusions We have been able to transform CEM into archetypes in an automatic, flexible, reusable transformation approach that could be extended to other clinical model specifications. We exploit the potential of OWL technologies for supporting the transformation process. We believe that our approach could be useful for international efforts in the area of semantic interoperability of EHR systems. PMID:25670753

Differences in rates of switchbacks after switching from branded to authorized generic and branded to generic drug products: cohort study

PubMed Central

Sarpatwari, Ameet; Dejene, Sara; Khan, Nazleen F; Lii, Joyce; Rogers, James R; Dutcher, Sarah K; Raofi, Saeid; Bohn, Justin; Connolly, John; Fischer, Michael A; Kesselheim, Aaron S; Gagne, Joshua J

2018-01-01

Abstract Objectives To compare rates of switchbacks to branded drug products for patients switched from branded to authorized generic drug products, which have the same active ingredients, appearance, and excipients as the branded product, with patients switched from branded to generic drug products, which have the same active ingredients as the branded product but may differ in appearance and excipients. Design Observational cohort study. Setting Private (a large commercial health plan) and public (Medicaid) insurance programs in the US. Participants Beneficiaries of a large US commercial health insurer between 2004 and 2013 (primary cohort) and Medicaid beneficiaries between 2000 and 2010 (replication cohort). Main outcome measures Patients taking branded products for one of the study drugs (alendronate tablets, amlodipine tablets, amlodipine-benazepril capsules, calcitonin salmon nasal spray, escitalopram tablets, glipizide extended release tablets, quinapril tablets, and sertraline tablets) were identified when they switched to an authorized generic or a generic drug product after the date of market entry of generic drug products. These patients were followed for switchbacks to the branded drug product in the year after their switch to an authorized generic or a generic drug product. Cox proportional hazard models were used to estimate hazard ratios and 95% confidence intervals after adjusting for demographics, including age, sex, and calendar year. Inverse variance meta-analysis was used to pool adjusted hazard ratios across all drug products. Results A total of 94 909 patients switched from branded to authorized generic drug products and 116 017 patients switched from branded to generic drug products and contributed to the switchback analysis. Unadjusted incidence rates of switchback varied across drug products, ranging from a low of 3.8 per 100 person years (for alendronate tablets) to a high of 17.8 per 100 person years (for amlodipine-benazepril capsules), with an overall rate of 8.2 per 100 person years across all drug products. Adjusted switchback rates were consistently lower for patients who switched from branded to authorized generic drug products compared with branded to generic drug products in the primary cohort (pooled hazard ratio 0.72, 95% confidence interval 0.64 to 0.81). Similar results (0.75, 0.62 to 0.91) were observed in the replication cohort. Conclusion Switching from branded to authorized generic drug products was associated with lower switchback rates compared with switching from branded to generic drug products. PMID:29615391

Patient socioeconomic determinants of the choice of generic versus brand name drugs in the context of a reference price system: evidence from Belgian prescription data.

PubMed

Farfan-Portet, Maria-Isabel; Van de Voorde, Carine; Vrijens, France; Vander Stichele, Robert

2012-06-01

The generic reference price system (RPS) can impose a financial penalty for patients using a brand name drug instead of its generic alternative. Previous studies on the impact of the RPS have not considered the potentially differential effect of using generic alternatives for individuals with a different socioeconomic background. However, patients' characteristics might determine their overall knowledge of the existence of the system and thus of the financial burden to which they may be confronted. The association between patients' characteristics and the use of generic drugs versus brand name drugs was analyzed for ten highly prescribed pharmaceutical molecules included in the Belgian generic reference price system. Prescriptions were obtained from a 10% sample of all general practitioners in 2008 (corresponding to 120,670 adult patients and 368,101 prescriptions). For each pharmaceutical molecule, logistic regression models were performed, with independent variables for patient socioeconomic background at the individual level (work status, having a guaranteed income and being entitled to increased reimbursement of co-payments) and at the level of the neighborhood (education). The percentage of generic prescriptions ranged from 24.7 to 76.4%, and the mean reference supplement in 2008 ranged from €4.3 to €37.8. For seven molecules, higher use of a generic alternative was associated with either having a guaranteed income, with receiving increased reimbursement of co-payments or with living in areas with the lowest levels of education. Globally, results provided evidence that the generic RPS in Belgium does not lead to a higher financial burden on individuals from a low socioeconomic background.

Comparative effectiveness of generic versus brand-name antiepileptic medications.

PubMed

Gagne, Joshua J; Kesselheim, Aaron S; Choudhry, Niteesh K; Polinski, Jennifer M; Hutchins, David; Matlin, Olga S; Brennan, Troyen A; Avorn, Jerry; Shrank, William H

2015-11-01

The objective of this study was to compare treatment persistence and rates of seizure-related events in patients who initiate antiepileptic drug (AED) therapy with a generic versus a brand-name product. We used linked electronic medical and pharmacy claims data to identify Medicare beneficiaries who initiated one of five AEDs (clonazepam, gabapentin, oxcarbazepine, phenytoin, zonisamide). We matched initiators of generic versus brand-name versions of these drugs using a propensity score that accounted for demographic, clinical, and health service utilization variables. We used a Cox proportional hazards model to compare rates of seizure-related emergency room (ER) visit or hospitalization (primary outcome) and ER visit for bone fracture or head injury (secondary outcome) between the matched generic and brand-name initiators. We also compared treatment persistence, measured as time to first 14-day treatment gap, between generic and brand-name initiators. We identified 19,760 AED initiators who met study eligibility criteria; 18,306 (93%) initiated a generic AED. In the matched cohort, we observed 47 seizure-related hospitalizations and ER visits among brand-name initiators and 31 events among generic initiators, corresponding to a hazard ratio of 0.53 (95% confidence interval, 0.30 to 0.96). Similar results were observed for the secondary clinical endpoint and across sensitivity analyses. Mean time to first treatment gap was 124.2 days (standard deviation [sd], 125.8) for brand-name initiators and 137.9 (sd, 148.6) for generic initiators. Patients who initiated generic AEDs had fewer adverse seizure-related clinical outcomes and longer continuous treatment periods before experiencing a gap than those who initiated brand-name versions. Copyright © 2015 Elsevier Inc. All rights reserved.

Are generic and brand-name statins clinically equivalent? Evidence from a real data-base.

PubMed

Corrao, Giovanni; Soranna, Davide; Arfè, Andrea; Casula, Manuela; Tragni, Elena; Merlino, Luca; Mancia, Giuseppe; Catapano, Alberico L

2014-10-01

Use of generic drugs can help contain drug spending. However, there is concern among patients and physicians that generic drugs may be clinically inferior to brand-name ones. This study aimed to compare patients treated with generic and brand-name statins in terms of therapeutic interruption and cardiovascular (CV) outcomes. 13,799 beneficiaries of the health care system of Lombardy, Italy, aged 40 years or older who were newly treated with generic or brand-name simvastatin during 2008, were followed until 2011 for the occurrence of two outcomes: 1) therapeutic discontinuation and 2) hospitalization for CV events. Hazard ratios (HR) associated with use of generic or brand-name at starting therapy (intention-to-treat analysis) and during follow-up (as-treated analysis) were estimated by fitting proportional hazard Cox models. A Monte-Carlo sensitivity analysis was performed to account for unmeasured confounders. Patients who started on generic did not experience a different risk of discontinuation (HR: 0.98; 95% CI 0.94 to 1.02) nor of CV outcomes (HR: 0.98; 95% CI 0.79 to 1.22) from those starting on brand-name. Patients who spent >75% of time of follow-up with statin available on generics did not experience a different risk of discontinuation (HR: 0.94; 95% CI 0.87 to 1.01), nor of CV outcomes (HR: 1.06; 95% CI 0.83 to 1.34), compared with those who mainly or only used brand-name statin. Our findings do not support the notion that in the real world clinical practice brand-name statins are superior to generics for keeping therapy and preventing CV outcomes. Copyright © 2014. Published by Elsevier B.V.

Models for the Development of Generic Skills in Finnish Higher Education

ERIC Educational Resources Information Center

Jääskelä, Päivikki; Nykänen, Seija; Tynjälä, Päivi

2018-01-01

This article examines how Finnish universities and other higher education institutes have responded to the challenges posed by rapid changes in the world of work and societies all over Europe, particularly with reference to the development of generic skills. The data were collected by means of individual and group interviews at three Finnish…

Invited Commentary on Wallace and Beange (2008): "On the Need for a Specialist Service within the Generic Hospital Setting"

ERIC Educational Resources Information Center

O'Hara, David

2008-01-01

In this article, the author comments on the paper "On the need for a specialist service within the generic hospital setting" (Wallace & Beange, 2008), which raises critical issues regarding effective models of healthcare delivery for individuals with intellectual disability (ID), particularly within a hospital setting (but not…

High speed polling protocol for multiple node network

NASA Technical Reports Server (NTRS)

Kirkham, Harold (Inventor)

1995-01-01

The invention is a multiple interconnected network of intelligent message-repeating remote nodes which employs a remote node polling process performed by a master node by transmitting a polling message generically addressed to all remote nodes associated with the master node. Each remote node responds upon receipt of the generically addressed polling message by transmitting a poll-answering informational message and by relaying the polling message to other adjacent remote nodes.

Automatic detection and classification of artifacts in single-channel EEG.

PubMed

Olund, Thomas; Duun-Henriksen, Jonas; Kjaer, Troels W; Sorensen, Helge B D

2014-01-01

Ambulatory EEG monitoring can provide medical doctors important diagnostic information, without hospitalizing the patient. These recordings are however more exposed to noise and artifacts compared to clinically recorded EEG. An automatic artifact detection and classification algorithm for single-channel EEG is proposed to help identifying these artifacts. Features are extracted from the EEG signal and wavelet subbands. Subsequently a selection algorithm is applied in order to identify the best discriminating features. A non-linear support vector machine is used to discriminate among different artifact classes using the selected features. Single-channel (Fp1-F7) EEG recordings are obtained from experiments with 12 healthy subjects performing artifact inducing movements. The dataset was used to construct and validate the model. Both subject-specific and generic implementation, are investigated. The detection algorithm yield an average sensitivity and specificity above 95% for both the subject-specific and generic models. The classification algorithm show a mean accuracy of 78 and 64% for the subject-specific and generic model, respectively. The classification model was additionally validated on a reference dataset with similar results.

Nonthermal gravitino production in tribrid inflation

NASA Astrophysics Data System (ADS)

Antusch, Stefan; Dutta, Koushik

2015-10-01

We investigate nonthermal gravitino production after tribrid inflation in supergravity, which is a variant of supersymmetric hybrid inflation where three fields are involved in the inflationary model and where the inflaton field resides in the matter sector of the theory. In contrast to conventional supersymmetric hybrid inflation, where nonthermal gravitino production imposes severe constraints on the inflationary model, we find that the "nonthermal gravitino problem" is generically absent in models of tribrid inflation, mainly due to two effects: (i) With the inflaton in tribrid inflation (after inflation) being lighter than the waterfall field, the latter has a second decay channel with a much larger rate than for the decay into gravitinos. This reduces the branching ratio for the decay of the waterfall field into gravitinos. (ii) The inflaton generically decays later than the waterfall field, and it does not produce gravitinos when it decays. This leads to a dilution of the gravitino population from the decays of the waterfall field. The combination of both effects generically leads to a strongly reduced gravitino production in tribrid inflation.

Development of a New Branded UK Food Composition Database for an Online Dietary Assessment Tool

PubMed Central

Carter, Michelle C.; Hancock, Neil; Albar, Salwa A.; Brown, Helen; Greenwood, Darren C.; Hardie, Laura J.; Frost, Gary S.; Wark, Petra A.; Cade, Janet E.

2016-01-01

The current UK food composition tables are limited, containing ~3300 mostly generic food and drink items. To reflect the wide range of food products available to British consumers and to potentially improve accuracy of dietary assessment, a large UK specific electronic food composition database (FCDB) has been developed. A mapping exercise has been conducted that matched micronutrient data from generic food codes to “Back of Pack” data from branded food products using a semi-automated process. After cleaning and processing, version 1.0 of the new FCDB contains 40,274 generic and branded items with associated 120 macronutrient and micronutrient data and 5669 items with portion images. Over 50% of food and drink items were individually mapped to within 10% agreement with the generic food item for energy. Several quality checking procedures were applied after mapping including; identifying foods above and below the expected range for a particular nutrient within that food group and cross-checking the mapping of items such as concentrated and raw/dried products. The new electronic FCDB has substantially increased the size of the current, publically available, UK food tables. The FCDB has been incorporated into myfood24, a new fully automated online dietary assessment tool and, a smartphone application for weight loss. PMID:27527214

Development of a New Branded UK Food Composition Database for an Online Dietary Assessment Tool.

PubMed

Carter, Michelle C; Hancock, Neil; Albar, Salwa A; Brown, Helen; Greenwood, Darren C; Hardie, Laura J; Frost, Gary S; Wark, Petra A; Cade, Janet E

2016-08-05

The current UK food composition tables are limited, containing ~3300 mostly generic food and drink items. To reflect the wide range of food products available to British consumers and to potentially improve accuracy of dietary assessment, a large UK specific electronic food composition database (FCDB) has been developed. A mapping exercise has been conducted that matched micronutrient data from generic food codes to "Back of Pack" data from branded food products using a semi-automated process. After cleaning and processing, version 1.0 of the new FCDB contains 40,274 generic and branded items with associated 120 macronutrient and micronutrient data and 5669 items with portion images. Over 50% of food and drink items were individually mapped to within 10% agreement with the generic food item for energy. Several quality checking procedures were applied after mapping including; identifying foods above and below the expected range for a particular nutrient within that food group and cross-checking the mapping of items such as concentrated and raw/dried products. The new electronic FCDB has substantially increased the size of the current, publically available, UK food tables. The FCDB has been incorporated into myfood24, a new fully automated online dietary assessment tool and, a smartphone application for weight loss.

DEFINITIVE SOX CONTROL PROCESS EVALUATIONS: LIMESTONE, DOUBLE ALKALI, AND CITRATE FGD PROCESSES

EPA Science Inventory

The report gives results of a detailed comparative technical and economic evaluation of limestone slurry, generic double alkali, and citrate flue gas desulfurization (FGD) processes, assuming proven technology and using representative power plant, process design, and economic pre...

ICME — A Mere Coupling of Models or a Discipline of Its Own?

NASA Astrophysics Data System (ADS)

Bambach, Markus; Schmitz, Georg J.; Prahl, Ulrich

Technically, ICME — Integrated computational materials engineering — is an approach for solving advanced engineering problems related to the design of new materials and processes by combining individual materials and process models. The combination of models by now is mainly achieved by manual transformation of the output of a simulation to form the input to a subsequent one. This subsequent simulation is either performed at a different length scale or constitutes a subsequent step along the process chain. Is ICME thus just a synonym for the coupling of simulations? In fact, most ICME publications up to now are examples of the joint application of selected models and software codes to a specific problem. However, from a systems point of view, the coupling of individual models and/or software codes across length scales and along material processing chains leads to highly complex meta-models. Their viability has to be ensured by joint efforts from science, industry, software developers and independent organizations. This paper identifies some developments that seem necessary to make future ICME simulations viable, sustainable and broadly accessible and accepted. The main conclusion is that ICME is more than a multi-disciplinary subject but a discipline of its own, for which a generic structural framework has to be elaborated and established.

Experimental study of a generic high-speed civil transport

NASA Technical Reports Server (NTRS)

Belton, Pamela S.; Campbell, Richard L.

1992-01-01

An experimental study of generic high-speed civil transport was conducted in the NASA Langley 8-ft Transonic Pressure Tunnel. The data base was obtained for the purpose of assessing the accuracy of various levels of computational analysis. Two models differing only in wingtip geometry were tested with and without flow-through nacelles. The baseline model has a curved or crescent wingtip shape, while the second model has a more conventional straight wingtip shape. The study was conducted at Mach numbers from 0.30 to 1.19. Force data were obtained on both the straight wingtip model and the curved wingtip model. Only the curved wingtip model was instrumented for measuring pressures. Selected longitudinal, lateral, and directional data are presented for both models. Selected pressure distributions for the curved wingtip model are also presented.

Generic particulate-monitoring system for retrofit to Hanford exhaust stacks

DOE Office of Scientific and Technical Information (OSTI.GOV)

Camman, J.W.; Carbaugh, E.H.

1982-11-01

Evaluations of 72 sampling and monitoring systems were performed at Hanford as the initial phase of a program to upgrade such systems. Each evaluation included determination of theoretical sampling efficiencies for particle sizes ranging from 0.5 to 10 micrometers aerodynamic equivalent diameter, addressing anisokinetic bias, sample transport line losses, and collector device efficiency. Upgrades needed to meet current Department of Energy guidance for effluent sampling and monitoring were identified, and a cost for each upgrade was estimated. A relative priority for each system's upgrade was then established based on evaluation results, current operational status, and future plans for the facilitymore » being exhausted. Common system upgrade requirements lead to the development of a generic design for common components of an exhaust stack sampling and monitoring system for airborne radioactive particulates. The generic design consists of commercially available off-the-shelf components to the extent practical and will simplify future stack sampling and monitoring system design, fabrication, and installation efforts. Evaluation results and their significance to system upgrades are empasized. A brief discussion of the analytical models used and experience to date with the upgrade program is included. Development of the generic stack sampling and monitoring system design is outlined. Generic system design features and limitations are presented. Requirements for generic system retrofitting to existing exhaust stacks are defined and benefits derived from generic system application are discussed.« less

A Generic Theory of the Integer Quantum Hall Effect

NASA Astrophysics Data System (ADS)

Shen, Yu

The integer quantum Hall effect (IQHE) is usually modeled by a Galilean or rotationally invariant Hamiltonian. These are not generic symmetries for electrons moving in a crystal background and can potentially confuse non-topological quantities with topological ones and identify otherwise distinct geometrical properties. In this thesis we present a generic theory for the IQHE. First we show that a generic guiding-center coherent state, defined by a natural metric in each Landau level, has the form of an antiholomorphic function times a Gaussian factor. Then by numerically solving the eigenproblem for a quartic Hamiltonian and finding the roots of the antiholomorphic part we are able to define a topological spin sn = n + 1/2 where n is the number of central roots that are enclosed by the semiclassical orbit. We derive a generic formula for the Hall viscosity in the absence of rotational symmetry and show that the previous interpretation of the scalar Hall viscosity as the "intrinsic orbital angular momentum" breaks down since the concept of angular momentum requires the presence of rotational symmetry. We also calculate generic electromagnetic responses and differentiate between universal terms that are diagonal with respect to Landau level index and non-universal terms that depend on inter-Landau-level mixing. We conclude that the generic theory offers a fundamental definition for the topological spin and reveals finer structure in the geometrical properties of the IQHE.

Parallel computing for automated model calibration

DOE Office of Scientific and Technical Information (OSTI.GOV)

Burke, John S.; Danielson, Gary R.; Schulz, Douglas A.

2002-07-29

Natural resources model calibration is a significant burden on computing and staff resources in modeling efforts. Most assessments must consider multiple calibration objectives (for example magnitude and timing of stream flow peak). An automated calibration process that allows real time updating of data/models, allowing scientists to focus effort on improving models is needed. We are in the process of building a fully featured multi objective calibration tool capable of processing multiple models cheaply and efficiently using null cycle computing. Our parallel processing and calibration software routines have been generically, but our focus has been on natural resources model calibration. Somore » far, the natural resources models have been friendly to parallel calibration efforts in that they require no inter-process communication, only need a small amount of input data and only output a small amount of statistical information for each calibration run. A typical auto calibration run might involve running a model 10,000 times with a variety of input parameters and summary statistical output. In the past model calibration has been done against individual models for each data set. The individual model runs are relatively fast, ranging from seconds to minutes. The process was run on a single computer using a simple iterative process. We have completed two Auto Calibration prototypes and are currently designing a more feature rich tool. Our prototypes have focused on running the calibration in a distributed computing cross platform environment. They allow incorporation of?smart? calibration parameter generation (using artificial intelligence processing techniques). Null cycle computing similar to SETI@Home has also been a focus of our efforts. This paper details the design of the latest prototype and discusses our plans for the next revision of the software.« less

Quasi-linear versus potential-based formulations of force-flux relations and the GENERIC for irreversible processes: comparisons and examples

NASA Astrophysics Data System (ADS)

Hütter, Markus; Svendsen, Bob

2013-11-01

An essential part in modeling out-of-equilibrium dynamics is the formulation of irreversible dynamics. In the latter, the major task consists in specifying the relations between thermodynamic forces and fluxes. In the literature, mainly two distinct approaches are used for the specification of force-flux relations. On the one hand, quasi-linear relations are employed, which are based on the physics of transport processes and fluctuation-dissipation theorems (de Groot and Mazur in Non-equilibrium thermodynamics, North Holland, Amsterdam, 1962, Lifshitz and Pitaevskii in Physical kinetics. Volume 10, Landau and Lifshitz series on theoretical physics, Pergamon Press, Oxford, 1981). On the other hand, force-flux relations are also often represented in potential form with the help of a dissipation potential (Šilhavý in The mechanics and thermodynamics of continuous media, Springer, Berlin, 1997). We address the question of how these two approaches are related. The main result of this presentation states that the class of models formulated by quasi-linear relations is larger than what can be described in a potential-based formulation. While the relation between the two methods is shown in general terms, it is demonstrated also with the help of three examples. The finding that quasi-linear force-flux relations are more general than dissipation-based ones also has ramifications for the general equation for non-equilibrium reversible-irreversible coupling (GENERIC: e.g., Grmela and Öttinger in Phys Rev E 56:6620-6632, 6633-6655, 1997, Öttinger in Beyond equilibrium thermodynamics, Wiley Interscience Publishers, Hoboken, 2005). This framework has been formulated and used in two different forms, namely a quasi-linear (Öttinger and Grmela in Phys Rev E 56:6633-6655, 1997, Öttinger in Beyond equilibrium thermodynamics, Wiley Interscience Publishers, Hoboken, 2005) and a dissipation potential-based (Grmela in Adv Chem Eng 39:75-129, 2010, Grmela in J Non-Newton Fluid Mech 165:980-986, 2010, Mielke in Continuum Mech Therm 23:233-256, 2011) form, respectively, relating the irreversible evolution to the entropy gradient. It is found that also in the case of GENERIC, the quasi-linear representation encompasses a wider class of phenomena as compared to the dissipation-based formulation. Furthermore, it is found that a potential exists for the irreversible part of the GENERIC if and only if one does for the underlying force-flux relations.

A generic high-dose rate {sup 192}Ir brachytherapy source for evaluation of model-based dose calculations beyond the TG-43 formalism

DOE Office of Scientific and Technical Information (OSTI.GOV)

Ballester, Facundo, E-mail: Facundo.Ballester@uv.es; Carlsson Tedgren, Åsa; Granero, Domingo

Purpose: In order to facilitate a smooth transition for brachytherapy dose calculations from the American Association of Physicists in Medicine (AAPM) Task Group No. 43 (TG-43) formalism to model-based dose calculation algorithms (MBDCAs), treatment planning systems (TPSs) using a MBDCA require a set of well-defined test case plans characterized by Monte Carlo (MC) methods. This also permits direct dose comparison to TG-43 reference data. Such test case plans should be made available for use in the software commissioning process performed by clinical end users. To this end, a hypothetical, generic high-dose rate (HDR) {sup 192}Ir source and a virtual watermore » phantom were designed, which can be imported into a TPS. Methods: A hypothetical, generic HDR {sup 192}Ir source was designed based on commercially available sources as well as a virtual, cubic water phantom that can be imported into any TPS in DICOM format. The dose distribution of the generic {sup 192}Ir source when placed at the center of the cubic phantom, and away from the center under altered scatter conditions, was evaluated using two commercial MBDCAs [Oncentra{sup ®} Brachy with advanced collapsed-cone engine (ACE) and BrachyVision ACUROS{sup TM}]. Dose comparisons were performed using state-of-the-art MC codes for radiation transport, including ALGEBRA, BrachyDose, GEANT4, MCNP5, MCNP6, and PENELOPE2008. The methodologies adhered to recommendations in the AAPM TG-229 report on high-energy brachytherapy source dosimetry. TG-43 dosimetry parameters, an along-away dose-rate table, and primary and scatter separated (PSS) data were obtained. The virtual water phantom of (201){sup 3} voxels (1 mm sides) was used to evaluate the calculated dose distributions. Two test case plans involving a single position of the generic HDR {sup 192}Ir source in this phantom were prepared: (i) source centered in the phantom and (ii) source displaced 7 cm laterally from the center. Datasets were independently produced by different investigators. MC results were then compared against dose calculated using TG-43 and MBDCA methods. Results: TG-43 and PSS datasets were generated for the generic source, the PSS data for use with the ACE algorithm. The dose-rate constant values obtained from seven MC simulations, performed independently using different codes, were in excellent agreement, yielding an average of 1.1109 ± 0.0004 cGy/(h U) (k = 1, Type A uncertainty). MC calculated dose-rate distributions for the two plans were also found to be in excellent agreement, with differences within type A uncertainties. Differences between commercial MBDCA and MC results were test, position, and calculation parameter dependent. On average, however, these differences were within 1% for ACUROS and 2% for ACE at clinically relevant distances. Conclusions: A hypothetical, generic HDR {sup 192}Ir source was designed and implemented in two commercially available TPSs employing different MBDCAs. Reference dose distributions for this source were benchmarked and used for the evaluation of MBDCA calculations employing a virtual, cubic water phantom in the form of a CT DICOM image series. The implementation of a generic source of identical design in all TPSs using MBDCAs is an important step toward supporting univocal commissioning procedures and direct comparisons between TPSs.« less

Stochastic, compartmental, and dynamic modeling of cross-contamination during mechanical smearing of cheeses.

PubMed

Aziza, Fanny; Mettler, Eric; Daudin, Jean-Jacques; Sanaa, Moez

2006-06-01

Cheese smearing is a complex process and the potential for cross-contamination with pathogenic or undesirable microorganisms is critical. During ripening, cheeses are salted and washed with brine to develop flavor and remove molds that could develop on the surfaces. Considering the potential for cross-contamination of this process in quantitative risk assessments could contribute to a better understanding of this phenomenon and, eventually, improve its control. The purpose of this article is to model the cross-contamination of smear-ripened cheeses due to the smearing operation under industrial conditions. A compartmental, dynamic, and stochastic model is proposed for mechanical brush smearing. This model has been developed to describe the exchange of microorganisms between compartments. Based on the analytical solution of the model equations and on experimental data collected with an industrial smearing machine, we assessed the values of the transfer parameters of the model. Monte Carlo simulations, using the distributions of transfer parameters, provide the final number of contaminated products in a batch and their final level of contamination for a given scenario taking into account the initial number of contaminated cheeses of the batch and their contaminant load. Based on analytical results, the model provides indicators for smearing efficiency and propensity of the process for cross-contamination. Unlike traditional approaches in mechanistic models, our approach captures the variability and uncertainty inherent in the process and the experimental data. More generally, this model could represent a generic base to use in modeling similar processes prone to cross-contamination.

Operationally Efficient Propulsion System Study (OEPSS) data book. Volume 1: Generic ground operations data

NASA Technical Reports Server (NTRS)

Byrd, Raymond J.

1990-01-01

This study was initiated to identify operations problems and cost drivers for current propulsion systems and to identify technology and design approaches to increase the operational efficiency and reduce operations costs for future propulsion systems. To provide readily usable data for the Advance Launch System (ALS) program, the results of the Operationally Efficient Propulsion System Study (OEPSS) were organized into a series of OEPSS Data Books as follows: Volume 1, Generic Ground Operations Data; Volume 2, Ground Operations Problems; Volume 3, Operations Technology; Volume 4, OEPSS Design Concepts; and Volume 5, OEPSS Final Review Briefing, which summarizes the activities and results of the study. This volume presents ground processing data for a generic LOX/LH2 booster and core propulsion system based on current STS experience. The data presented includes: top logic diagram, process flow, activities bar-chart, loaded timelines, manpower requirements in terms of duration, headcount and skill mix per operations and maintenance instruction (OMI), and critical path tasks and durations.

The development of a post-test diagnostic system for rocket engines

NASA Technical Reports Server (NTRS)

Zakrajsek, June F.

1991-01-01

An effort was undertaken by NASA to develop an automated post-test, post-flight diagnostic system for rocket engines. The automated system is designed to be generic and to automate the rocket engine data review process. A modular, distributed architecture with a generic software core was chosen to meet the design requirements. The diagnostic system is initially being applied to the Space Shuttle Main Engine data review process. The system modules currently under development are the session/message manager, and portions of the applications section, the component analysis section, and the intelligent knowledge server. An overview is presented of a rocket engine data review process, the design requirements and guidelines, the architecture and modules, and the projected benefits of the automated diagnostic system.

TrOn: an anatomical ontology for the beetle Tribolium castaneum.

PubMed

Dönitz, Jürgen; Grossmann, Daniela; Schild, Inga; Schmitt-Engel, Christian; Bradler, Sven; Prpic, Nikola-Michael; Bucher, Gregor

2013-01-01

In a morphological ontology the expert's knowledge is represented in terms, which describe morphological structures and how these structures relate to each other. With the assistance of ontologies this expert knowledge is made processable by machines, through a formal and standardized representation of terms and their relations to each other. The red flour beetle Tribolium castaneum, a representative of the most species rich animal taxon on earth (the Coleoptera), is an emerging model organism for development, evolution, physiology, and pest control. In order to foster Tribolium research, we have initiated the Tribolium Ontology (TrOn), which describes the morphology of the red flour beetle. The content of this ontology comprises so far most external morphological structures as well as some internal ones. All modeled structures are consistently annotated for the developmental stages larva, pupa and adult. In TrOn all terms are grouped into three categories: Generic terms represent morphological structures, which are independent of a developmental stage. In contrast, downstream of such terms are concrete terms which stand for a dissectible structure of a beetle at a specific life stage. Finally, there are mixed terms describing structures that are only found at one developmental stage. These terms combine the characteristics of generic and concrete terms with features of both. These annotation principles take into account the changing morphology of the beetle during development and provide generic terms to be used in applications or for cross linking with other ontologies and data resources. We use the ontology for implementing an intuitive search function at the electronic iBeetle-Base, which stores morphological defects found in a genome wide RNA interference (RNAi) screen. The ontology is available for download at http://ibeetle-base.uni-goettingen.de.

Modeling Techniques Used to Analyze Safety of Payloads for Generic Missile Type Weapons Systems During an Indirect Lightning Strike

DOE Office of Scientific and Technical Information (OSTI.GOV)

Perkins, M P; Ong, M M; Crull, E W

2009-07-21

During lightning strikes buildings and other structures can act as imperfect Faraday Cages, enabling electromagnetic fields to be developed inside the facilities. Some equipment stored inside these facilities may unfortunately act as antenna systems. It is important to have techniques developed to analyze how much voltage, current, or energy dissipation may be developed over valuable components. In this discussion we will demonstrate the modeling techniques used to accurately analyze a generic missile type weapons system as it goes through different stages of assembly. As work is performed on weapons systems detonator cables can become exposed. These cables will form differentmore » monopole and loop type antenna systems that must be analyzed to determine the voltages developed over the detonator regions. Due to the low frequencies of lightning pulses, a lumped element circuit model can be developed to help analyze the different antenna configurations. We will show an example of how numerical modeling can be used to develop the lumped element circuit models used to calculate voltage, current, or energy dissipated over the detonator region of a generic missile type weapons system.« less

Similarity between generic and brand-name antihypertensive drugs for primary prevention of cardiovascular disease: evidence from a large population-based study.

PubMed

Corrao, Giovanni; Soranna, Davide; Merlino, Luca; Mancia, Giuseppe

2014-10-01

Although generic and earlier brand-name counterparts are bioequivalent, their equivalence in preventing relevant clinical outcomes is of concern. To compare effectiveness of generic and brand-name antihypertensive drugs for preventing the onset of cardiovascular (CV) outcomes. A population-based, nested case-control study was carried out by including the cohort of 78 520 patients from Lombardy (Italy) aged 18 years or older who were newly treated with antihypertensive drugs during 2005. Cases were the 2206 patients who experienced a hospitalization for CV disease from initial prescription until 2011. One control for each case was randomly selected from the same cohort that generated cases. Logistic regression was used to model the CV risk associated with starting on and/or continuing with generic or brand-name agents. There was no evidence that patients who started on generics experienced different CV risk than those on brand-name product (OR 0·86; 95% CI 0·63-1·17). Patients at whom generics were main dispensed had not significantly difference in CV outcomes than those mainly on brand-name agents (OR 1·19; 95% CI 0·86-1·63). Compared with patients who kept initial brand-name therapy, those who experienced brand-to-generic or generic-to-brand switches, and those always on generics, did not show differential CV risks, being the corresponding ORs (and 95% CIs), 1·18 (0·96-1·47), 0·87 (0·63-1·21) and 1·08 (0·80-1·46). Our findings do not support the notion that brand-name antihypertensive agents are superior to generics for preventing CV outcomes in the real-world clinical practice. © 2014 Stichting European Society for Clinical Investigation Journal Foundation.

A prototype computerized synthesis methodology for generic space access vehicle (SAV) conceptual design

NASA Astrophysics Data System (ADS)

Huang, Xiao

2006-04-01

Today's and especially tomorrow's competitive launch vehicle design environment requires the development of a dedicated generic Space Access Vehicle (SAV) design methodology. A total of 115 industrial, research, and academic aircraft, helicopter, missile, and launch vehicle design synthesis methodologies have been evaluated. As the survey indicates, each synthesis methodology tends to focus on a specific flight vehicle configuration, thus precluding the key capability to systematically compare flight vehicle design alternatives. The aim of the research investigation is to provide decision-making bodies and the practicing engineer a design process and tool box for robust modeling and simulation of flight vehicles where the ultimate performance characteristics may hinge on numerical subtleties. This will enable the designer of a SAV for the first time to consistently compare different classes of SAV configurations on an impartial basis. This dissertation presents the development steps required towards a generic (configuration independent) hands-on flight vehicle conceptual design synthesis methodology. This process is developed such that it can be applied to any flight vehicle class if desired. In the present context, the methodology has been put into operation for the conceptual design of a tourist Space Access Vehicle. The case study illustrates elements of the design methodology & algorithm for the class of Horizontal Takeoff and Horizontal Landing (HTHL) SAVs. The HTHL SAV design application clearly outlines how the conceptual design process can be centrally organized, executed and documented with focus on design transparency, physical understanding and the capability to reproduce results. This approach offers the project lead and creative design team a management process and tool which iteratively refines the individual design logic chosen, leading to mature design methods and algorithms. As illustrated, the HTHL SAV hands-on design methodology offers growth potential in that the same methodology can be continually updated and extended to other SAV configuration concepts, such as the Vertical Takeoff and Vertical Landing (VTVL) SAV class. Having developed, validated and calibrated the methodology for HTHL designs in the 'hands-on' mode, the report provides an outlook how the methodology will be integrated into a prototype computerized design synthesis software AVDS-PrADOSAV in a follow-on step.

A generic method for evaluating crowding in the emergency department.

PubMed

Eiset, Andreas Halgreen; Erlandsen, Mogens; Møllekær, Anders Brøns; Mackenhauer, Julie; Kirkegaard, Hans

2016-06-14

Crowding in the emergency department (ED) has been studied intensively using complicated non-generic methods that may prove difficult to implement in a clinical setting. This study sought to develop a generic method to describe and analyse crowding from measurements readily available in the ED and to test the developed method empirically in a clinical setting. We conceptualised a model with ED patient flow divided into separate queues identified by timestamps for predetermined events. With temporal resolution of 30 min, queue lengths were computed as Q(t + 1) = Q(t) + A(t) - D(t), with A(t) = number of arrivals, D(t) = number of departures and t = time interval. Maximum queue lengths for each shift of each day were found and risks of crowding computed. All tests were performed using non-parametric methods. The method was applied in the ED of Aarhus University Hospital, Denmark utilising an open cohort design with prospectively collected data from a one-year observation period. By employing the timestamps already assigned to the patients while in the ED, a generic queuing model can be computed from which crowding can be described and analysed in detail. Depending on availability of data, the model can be extended to include several queues increasing the level of information. When applying the method empirically, 41,693 patients were included. The studied ED had a high risk of bed occupancy rising above 100 % during day and evening shift, especially on weekdays. Further, a 'carry over' effect was shown between shifts and days. The presented method offers an easy and generic way to get detailed insight into the dynamics of crowding in an ED.

Greater first year effectiveness drives favorable cost-effectiveness of brand risedronate versus generic or brand alendronate: modeled Canadian analysis

PubMed Central

Papaioannou, A.; Thompson, M. F.; Pasquale, M. K.; Adachi, J. D.

2016-01-01

Summary The RisedronatE and ALendronate (REAL) study provided a unique opportunity to conduct cost-effectiveness analyses based on effectiveness data from real-world clinical practice. Using a published osteoporosis model, the researchers found risedronate to be cost-effective compared to generic or brand alendronate for the treatment of Canadian postmenopausal osteoporosis in patients aged 65 years or older. Introduction The REAL study provides robust data on the real-world performance of risedronate and alendronate. The study used these data to assess the cost-effectiveness of brand risedronate versus generic or brand alendronate for treatment of Canadian postmenopausal osteoporosis patients aged 65 years or older. Methods A previously published osteoporosis model was populated with Canadian cost and epidemiological data, and the estimated fracture risk was validated. Effectiveness data were derived from REAL and utility data from published sources. The incremental cost per quality-adjusted life-year (QALY) gained was estimated from a Canadian public payer perspective, and comprehensive sensitivity analyses were conducted. Results The base case analysis found fewer fractures and more QALYs in the risedronate cohort, providing an incremental cost per QALY gained of $3,877 for risedronate compared to generic alendronate. The results were most sensitive to treatment duration and effectiveness. Conclusions The REAL study provided a unique opportunity to conduct cost-effectiveness analyses based on effectiveness data taken from real-world clinical practice. The analysis supports the cost-effectiveness of risedronate compared to generic or brand alendronate and the use of risedronate for the treatment of osteoporotic Canadian women aged 65 years or older with a BMD T-score ≤−2.5. PMID:18008100

Multiple Criteria Decision Analysis (MCDA) for evaluating new medicines in Health Technology Assessment and beyond: The Advance Value Framework.

PubMed

Angelis, Aris; Kanavos, Panos

2017-09-01

Escalating drug prices have catalysed the generation of numerous "value frameworks" with the aim of informing payers, clinicians and patients on the assessment and appraisal process of new medicines for the purpose of coverage and treatment selection decisions. Although this is an important step towards a more inclusive Value Based Assessment (VBA) approach, aspects of these frameworks are based on weak methodologies and could potentially result in misleading recommendations or decisions. In this paper, a Multiple Criteria Decision Analysis (MCDA) methodological process, based on Multi Attribute Value Theory (MAVT), is adopted for building a multi-criteria evaluation model. A five-stage model-building process is followed, using a top-down "value-focused thinking" approach, involving literature reviews and expert consultations. A generic value tree is structured capturing decision-makers' concerns for assessing the value of new medicines in the context of Health Technology Assessment (HTA) and in alignment with decision theory. The resulting value tree (Advance Value Tree) consists of three levels of criteria (top level criteria clusters, mid-level criteria, bottom level sub-criteria or attributes) relating to five key domains that can be explicitly measured and assessed: (a) burden of disease, (b) therapeutic impact, (c) safety profile (d) innovation level and (e) socioeconomic impact. A number of MAVT modelling techniques are introduced for operationalising (i.e. estimating) the model, for scoring the alternative treatment options, assigning relative weights of importance to the criteria, and combining scores and weights. Overall, the combination of these MCDA modelling techniques for the elicitation and construction of value preferences across the generic value tree provides a new value framework (Advance Value Framework) enabling the comprehensive measurement of value in a structured and transparent way. Given its flexibility to meet diverse requirements and become readily adaptable across different settings, the Advance Value Framework could be offered as a decision-support tool for evaluators and payers to aid coverage and reimbursement of new medicines. Copyright © 2017 The Authors. Published by Elsevier Ltd.. All rights reserved.

The Geoinformatica free and open source software stack

NASA Astrophysics Data System (ADS)

Jolma, A.

2012-04-01

The Geoinformatica free and open source software (FOSS) stack is based mainly on three established FOSS components, namely GDAL, GTK+, and Perl. GDAL provides access to a very large selection of geospatial data formats and data sources, a generic geospatial data model, and a large collection of geospatial analytical and processing functionality. GTK+ and the Cairo graphics library provide generic graphics and graphical user interface capabilities. Perl is a programming language, for which there is a very large set of FOSS modules for a wide range of purposes and which can be used as an integrative tool for building applications. In the Geoinformatica stack, data storages such as FOSS RDBMS PostgreSQL with its geospatial extension PostGIS can be used below the three above mentioned components. The top layer of Geoinformatica consists of a C library and several Perl modules. The C library comprises a general purpose raster algebra library, hydrological terrain analysis functions, and visualization code. The Perl modules define a generic visualized geospatial data layer and subclasses for raster and vector data and graphs. The hydrological terrain functions are already rather old and they suffer for example from the requirement of in-memory rasters. Newer research conducted using the platform include basic geospatial simulation modeling, visualization of ecological data, linking with a Bayesian network engine for spatial risk assessment in coastal areas, and developing standards-based distributed water resources information systems in Internet. The Geoinformatica stack constitutes a platform for geospatial research, which is targeted towards custom analytical tools, prototyping and linking with external libraries. Writing custom analytical tools is supported by the Perl language and the large collection of tools that are available especially in GDAL and Perl modules. Prototyping is supported by the GTK+ library, the GUI tools, and the support for object-oriented programming in Perl. New feature types, geospatial layer classes, and tools as extensions with specific features can be defined, used, and studied. Linking with external libraries is possible using the Perl foreign function interface tools or with generic tools such as Swig. We are interested in implementing and testing linking Geoinformatica with existing or new more specific hydrological FOSS.

The Modular Aero-Propulsion System Simulation (MAPSS) Users' Guide

NASA Technical Reports Server (NTRS)

Parker, Khary I.; Melcher, Kevin J.

2004-01-01

The Modular Aero-Propulsion System Simulation is a flexible turbofan engine simulation environment that provides the user a platform to develop advanced control algorithms. It is capable of testing the performance of control designs on a validated and verified generic engine model. In addition, it is able to generate state-space linear models of the engine model to aid in controller design. The engine model used in MAPSS is a generic high-pressure ratio, dual-spool, lowbypass, military-type, variable cycle turbofan engine with a digital controller. MAPSS is controlled by a graphical user interface (GUI) and this guide explains how to use it to take advantage of the capabilities of MAPSS.

Earthquake Predictability: Results From Aggregating Seismicity Data And Assessment Of Theoretical Individual Cases Via Synthetic Data

NASA Astrophysics Data System (ADS)

Adamaki, A.; Roberts, R.

2016-12-01

For many years an important aim in seismological studies has been forecasting the occurrence of large earthquakes. Despite some well-established statistical behavior of earthquake sequences, expressed by e.g. the Omori law for aftershock sequences and the Gutenburg-Richter distribution of event magnitudes, purely statistical approaches to short-term earthquake prediction have in general not been successful. It seems that better understanding of the processes leading to critical stress build-up prior to larger events is necessary to identify useful precursory activity, if this exists, and statistical analyses are an important tool in this context. There has been considerable debate on the usefulness or otherwise of foreshock studies for short-term earthquake prediction. We investigate generic patterns of foreshock activity using aggregated data and by studying not only strong but also moderate magnitude events. Aggregating empirical local seismicity time series prior to larger events observed in and around Greece reveals a statistically significant increasing rate of seismicity over 20 days prior to M>3.5 earthquakes. This increase cannot be explained by tempo-spatial clustering models such as ETAS, implying genuine changes in the mechanical situation just prior to larger events and thus the possible existence of useful precursory information. Because of tempo-spatial clustering, including aftershocks to foreshocks, even if such generic behavior exists it does not necessarily follow that foreshocks have the potential to provide useful precursory information for individual larger events. Using synthetic catalogs produced based on different clustering models and different presumed system sensitivities we are now investigating to what extent the apparently established generic foreshock rate acceleration may or may not imply that the foreshocks have potential in the context of routine forecasting of larger events. Preliminary results suggest that this is the case, but that it is likely that physically-based models of foreshock clustering will be a necessary, but not necessarily sufficient, basis for successful forecasting.

Risk Based Inspection Methodology and Software Applied to Atmospheric Storage Tanks

NASA Astrophysics Data System (ADS)

Topalis, P.; Korneliussen, G.; Hermanrud, J.; Steo, Y.

2012-05-01

A new risk-based inspection (RBI) methodology and software is presented in this paper. The objective of this work is to allow management of the inspections of atmospheric storage tanks in the most efficient way, while, at the same time, accident risks are minimized. The software has been built on the new risk framework architecture, a generic platform facilitating efficient and integrated development of software applications using risk models. The framework includes a library of risk models and the user interface is automatically produced on the basis of editable schemas. This risk-framework-based RBI tool has been applied in the context of RBI for above-ground atmospheric storage tanks (AST) but it has been designed with the objective of being generic enough to allow extension to the process plants in general. This RBI methodology is an evolution of an approach and mathematical models developed for Det Norske Veritas (DNV) and the American Petroleum Institute (API). The methodology assesses damage mechanism potential, degradation rates, probability of failure (PoF), consequence of failure (CoF) in terms of environmental damage and financial loss, risk and inspection intervals and techniques. The scope includes assessment of the tank floor for soil-side external corrosion and product-side internal corrosion and the tank shell courses for atmospheric corrosion and internal thinning. It also includes preliminary assessment for brittle fracture and cracking. The data are structured according to an asset hierarchy including Plant, Production Unit, Process Unit, Tag, Part and Inspection levels and the data are inherited / defaulted seamlessly from a higher hierarchy level to a lower level. The user interface includes synchronized hierarchy tree browsing, dynamic editor and grid-view editing and active reports with drill-in capability.

Impact of Site Elevation on Mg Smelter Design

NASA Astrophysics Data System (ADS)

Baker, Phillip W.

Site elevation has many surprising and significant impacts on the engineering design of metallurgical plant of all types. Electrolytic magnesium smelters maybe built at high elevation for a variety of reasons including availability of raw material, energy or electric power. Because of the unit processes they typically involve, Mg smelters can be extensively impacted by site elevation. In this paper, generic examples of the design changes required to adapt a smelter originally designed for sea level to operate at 2700 m are presented. While the examples are drawn from a magnesium plant design case, these changes are generically applicable to all industrial plants utilizing similar unit processes irrespective of product.

Pharmaceutical company influences on medication prescribing and their potential impact on quality use of medicines.

PubMed

Kyle, G J; Nissen, L M; Tett, S E

2008-10-01

Pharmaceuticals are big business, reporting strong market growth year after year. The 'gatekeepers' of this market are prescribers of medicines, who are the major target of pharmaceutical companies, utilizing direct and indirect influences. This paper draws on previous research investigating pharmaceutical company prescribing influences to develop a qualitative model demonstrating the synergism between commercial influences on prescribing. The generic model was used to explore a realistic but hypothetical scenario to ascertain the applicability of the model. A generic influence model was developed. The model was readily able to be adapted to reflect a realistic practice scenario. Prescriber awareness of the linkages between various seemingly separate marketing techniques could potentially improve medicines usage in an evidence-based practice paradigm.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Huff, Kathryn D.

Component level and system level abstraction of detailed computational geologic repository models have resulted in four rapid computational models of hydrologic radionuclide transport at varying levels of detail. Those models are described, as is their implementation in Cyder, a software library of interchangeable radionuclide transport models appropriate for representing natural and engineered barrier components of generic geology repository concepts. A proof of principle demonstration was also conducted in which these models were used to represent the natural and engineered barrier components of a repository concept in a reducing, homogenous, generic geology. This base case demonstrates integration of the Cyder openmore » source library with the Cyclus computational fuel cycle systems analysis platform to facilitate calculation of repository performance metrics with respect to fuel cycle choices. (authors)« less

The generic world-sheet action of irrational conformal field theory

DOE Office of Scientific and Technical Information (OSTI.GOV)

Clubok, K.; Halpern, M.B.

1995-05-01

We review developments in the world-sheet action formulation of the generic irrational conformal field theory, including the non-linear and the linearized forms of the action. These systems form a large class of spin-two gauged WZW actions which exhibit exotic gravitational couplings. Integrating out the gravitational field, we also speculate on a connection with sigma models.

Generic screen representations for future-proof systems, is it possible? There is more to a GUI than meets the eye.

PubMed

van der Linden, Helma; Austin, Tony; Talmon, Jan

2009-09-01

Future-proof EHR systems must be capable of interpreting information structures for medical concepts that were not available at the build-time of the system. The two-model approach of CEN 13606/openEHR using archetypes achieves this by separating generic clinical knowledge from domain-related knowledge. The presentation of this information can either itself be generic, or require design time awareness of the domain knowledge being employed. To develop a Graphical User Interface (GUI) that would be capable of displaying previously unencountered clinical data structures in a meaningful way. Through "reasoning by analogy" we defined an approach for the representation and implementation of "presentational knowledge". A proof-of-concept implementation was built to validate its implementability and to test for unanticipated issues. A two-model approach to specifying and generating a screen representation for archetype-based information, inspired by the two-model approach of archetypes, was developed. There is a separation between software-related display knowledge and domain-related display knowledge and the toolkit is designed with the reuse of components in mind. The approach leads to a flexible GUI that can adapt not only to information structures that had not been predefined within the receiving system, but also to novel ways of displaying the information. We also found that, ideally, the openEHR Archetype Definition Language should receive minor adjustments to allow for generic binding.

Distributed delays in a hybrid model of tumor-immune system interplay.

PubMed

Caravagna, Giulio; Graudenzi, Alex; d'Onofrio, Alberto

2013-02-01

A tumor is kinetically characterized by the presence of multiple spatio-temporal scales in which its cells interplay with, for instance, endothelial cells or Immune system effectors, exchanging various chemical signals. By its nature, tumor growth is an ideal object of hybrid modeling where discrete stochastic processes model low-numbers entities, and mean-field equations model abundant chemical signals. Thus, we follow this approach to model tumor cells, effector cells and Interleukin-2, in order to capture the Immune surveillance effect. We here present a hybrid model with a generic delay kernel accounting that, due to many complex phenomena such as chemical transportation and cellular differentiation, the tumor-induced recruitment of effectors exhibits a lag period. This model is a Stochastic Hybrid Automata and its semantics is a Piecewise Deterministic Markov process where a two-dimensional stochastic process is interlinked to a multi-dimensional mean-field system. We instantiate the model with two well-known weak and strong delay kernels and perform simulations by using an algorithm to generate trajectories of this process. Via simulations and parametric sensitivity analysis techniques we (i) relate tumor mass growth with the two kernels, we (ii) measure the strength of the Immune surveillance in terms of probability distribution of the eradication times, and (iii) we prove, in the oscillatory regime, the existence of a stochastic bifurcation resulting in delay-induced tumor eradication.

Fundamental properties of cooperative contagion processes

NASA Astrophysics Data System (ADS)

Chen, Li; Ghanbarnejad, Fakhteh; Brockmann, Dirk

2017-10-01

We investigate the effects of cooperativity between contagion processes that spread and persist in a host population. We propose and analyze a dynamical model in which individuals that are affected by one transmissible agent A exhibit a higher than baseline propensity of being affected by a second agent B and vice versa. The model is a natural extension of the traditional susceptible-infected-susceptible model used for modeling single contagion processes. We show that cooperativity changes the dynamics of the system considerably when cooperativity is strong. The system exhibits discontinuous phase transitions not observed in single agent contagion, multi-stability, a separation of the traditional epidemic threshold into different thresholds for inception and extinction as well as hysteresis. These properties are robust and are corroborated by stochastic simulations on lattices and generic network topologies. Finally, we investigate wave propagation and transients in a spatially extended version of the model and show that especially for intermediate values of baseline reproduction ratios the system is characterized by various types of wave-front speeds. The system can exhibit spatially heterogeneous stationary states for some parameters and negative front speeds (receding wave fronts). The two agent model can be employed as a starting point for more complex contagion processes, involving several interacting agents, a model framework particularly suitable for modeling the spread and dynamics of microbiological ecosystems in host populations.

The transition to hospital consultant and the influence of preparedness, social support, and perception: A structural equation modelling approach.

PubMed

Westerman, Michiel; Teunissen, Pim W; Fokkema, Joanne P I; van der Vleuten, Cees P M; Scherpbier, Albert J J A; Siegert, Carl E H; Scheele, Fedde

2013-04-01

Insight into the transition from specialist registrar to hospital consultant is needed to better align specialty training with starting as a consultant and to facilitate this transition. This study investigates whether preparedness regarding medical and generic competencies, perceived intensity, and social support are associated with burnout among new consultants. A population-based study among all 2643 new consultants in the Netherlands (all specialties) was conducted in June 2010. A questionnaire covering preparedness for practice, intensity of the transition, social support, and burnout was used. Structural equation modelling was used for statistical analysis. Data from a third of the population were available (32% n = 840) (43% male/57% female). Preparation in generic competencies received lower ratings than in medical competencies. A total of 10% met the criteria for burnout and 18% scored high on the emotional exhaustion subscale. Perceived lack of preparation in generic competencies correlated with burnout (r = 0.15, p < 0.001). No such relation was found for medical competencies. Furthermore, social support protected against burnout. These findings illustrate the relevance of generic competencies for new hospital consultants. Furthermore, social support facilitates this intense and stressful stage within the medical career.

A Microstructure-Based Time-Dependent Crack Growth Model for Life and Reliability Prediction of Turbopropulsion Systems

NASA Astrophysics Data System (ADS)

Chan, Kwai S.; Enright, Michael P.; Moody, Jonathan; Fitch, Simeon H. K.

2014-01-01

The objective of this investigation was to develop an innovative methodology for life and reliability prediction of hot-section components in advanced turbopropulsion systems. A set of generic microstructure-based time-dependent crack growth (TDCG) models was developed and used to assess the sources of material variability due to microstructure and material parameters such as grain size, activation energy, and crack growth threshold for TDCG. A comparison of model predictions and experimental data obtained in air and in vacuum suggests that oxidation is responsible for higher crack growth rates at high temperatures, low frequencies, and long dwell times, but oxidation can also induce higher crack growth thresholds (Δ K th or K th) under certain conditions. Using the enhanced risk analysis tool and material constants calibrated to IN 718 data, the effect of TDCG on the risk of fracture in turboengine components was demonstrated for a generic rotor design and a realistic mission profile using the DARWIN® probabilistic life-prediction code. The results of this investigation confirmed that TDCG and cycle-dependent crack growth in IN 718 can be treated by a simple summation of the crack increments over a mission. For the temperatures considered, TDCG in IN 718 can be considered as a K-controlled or a diffusion-controlled oxidation-induced degradation process. This methodology provides a pathway for evaluating microstructural effects on multiple damage modes in hot-section components.

Retrofitted supersymmetric models

NASA Astrophysics Data System (ADS)

Bose, Manatosh

This thesis explores several models of metastable dynamic supersymmetry breaking (MDSB) and a supersymmetric model of hybrid inflation. All of these models possess discrete R-symmetries. We specially focus on the retrofitted models for supersymmetry breaking models. At first we construct retrofitted models of gravity mediation. In these models we explore the genericity of the so-called "split supersymmetry." We show that with the simplest models, where the goldstino multiplet is neutral under the discrete R-symmetry, a split spectrum is not generic. However if the goldstino superfield is charged under some symmetry other than the R-symmetry, then a split spectrum is achievable but not generic. We also present a gravity mediated model where the fine tuning of the Z-boson mass is dictated by a discrete choice rather than a continuous tuning. Then we construct retrofitted models of gauge mediated SUSY breaking. We show that, in these models, if the approximate R-symmetry of the theory is spontaneously broken, the messenger scale is fixed; if explicitly broken by retrofitted couplings, a very small dimensionless number is required; if supergravity corrections are responsible for the symmetry breaking, at least two moderately small couplings are required, and that there is a large range of possible messenger scales. Finally we switch our attention to small field hybrid inflation. We construct a model that yields a spectral index ns = 0.96. Here, we also briefly discuss the possibility of relating the scale of inflation with the dynamics responsible for supersymmetry breaking.

Bioequivalence between innovator and generic tacrolimus in liver and kidney transplant recipients: A randomized, crossover clinical trial

PubMed Central

Vinks, Alexander A.; Fukuda, Tsuyoshi; King, Eileen C.; Zou, Yuanshu; Jiang, Wenlei; Klawitter, Jelena; Christians, Uwe

2017-01-01

Background Although the generic drug approval process has a long-term successful track record, concerns remain for approval of narrow therapeutic index generic immunosuppressants, such as tacrolimus, in transplant recipients. Several professional transplant societies and publications have generated skepticism of the generic approval process. Three major areas of concern are that the pharmacokinetic properties of generic products and the innovator (that is, “brand”) product in healthy volunteers may not reflect those in transplant recipients, bioequivalence between generic and innovator may not ensure bioequivalence between generics, and high-risk patients may have specific bioequivalence concerns. Such concerns have been fueled by anecdotal observations and retrospective and uncontrolled published studies, while well-designed, controlled prospective studies testing the validity of the regulatory bioequivalence testing approach for narrow therapeutic index immunosuppressants in transplant recipients have been lacking. Thus, the present study prospectively assesses bioequivalence between innovator tacrolimus and 2 generics in individuals with a kidney or liver transplant. Methods and findings From December 2013 through October 2014, a prospective, replicate dosing, partially blinded, randomized, 3-treatment, 6-period crossover bioequivalence study was conducted at the University of Cincinnati in individuals with a kidney (n = 35) or liver transplant (n = 36). Abbreviated New Drug Applications (ANDA) data that included manufacturing and healthy individual pharmacokinetic data for all generics were evaluated to select the 2 most disparate generics from innovator, and these were named Generic Hi and Generic Lo. During the 8-week study period, pharmacokinetic studies assessed the bioequivalence of Generic Hi and Generic Lo with the Innovator tacrolimus and with each other. Bioequivalence of the major tacrolimus metabolite was also assessed. All products fell within the US Food and Drug Administration (FDA) average bioequivalence (ABE) acceptance criteria of a 90% confidence interval contained within the confidence limits of 80.00% and 125.00%. Within-subject variability was similar for the area under the curve (AUC) (range 12.11–15.81) and the concentration maximum (Cmax) (range 17.96–24.72) for all products. The within-subject variability was utilized to calculate the scaled average bioequivalence (SCABE) 90% confidence interval. The calculated SCABE 90% confidence interval was 84.65%–118.13% and 80.00%–125.00% for AUC and Cmax, respectively. The more stringent SCABE acceptance criteria were met for all product comparisons for AUC and Cmax in both individuals with a kidney transplant and those with a liver transplant. European Medicines Agency (EMA) acceptance criteria for narrow therapeutic index drugs were also met, with the only exception being in the case of Brand versus Generic Lo, in which the upper limits of the 90% confidence intervals were 111.30% (kidney) and 112.12% (liver). These were only slightly above the upper EMA acceptance criteria limit for an AUC of 111.11%. SCABE criteria were also met for the major tacrolimus metabolite 13-O-desmethyl tacrolimus for AUC, but it failed the EMA criterion. No acute rejections, no differences in renal function in all individuals, and no differences in liver function were observed in individuals with a liver transplant using the Tukey honest significant difference (HSD) test for multiple comparisons. Fifty-two percent and 65% of all individuals with a kidney or liver transplant, respectively, reported an adverse event. The Exact McNemar test for paired categorical data with adjustments for multiple comparisons was used to compare adverse event rates among the products. No statistically significant differences among any pairs of products were found for any adverse event code or for adverse events overall. Limitations of this study include that the observations were made under strictly controlled conditions that did not allow for the impact of nonadherence or feeding on the possible pharmacokinetic differences. Generic Hi and Lo were selected based upon bioequivalence data in healthy volunteers because no pharmacokinetic data in recipients were available for all products. The safety data should be interpreted in light of the small number of participants and the short observation periods. Lastly, only the 1 mg tacrolimus strength was utilized in this study. Conclusions Using an innovative, controlled bioequivalence study design, we observed equivalence between tacrolimus innovator and 2 generic products as well as between 2 generic products in individuals after kidney or liver transplantation following current FDA bioequivalence metrics. These results support the position that bioequivalence for the narrow therapeutic index drug tacrolimus translates from healthy volunteers to individuals receiving a kidney or liver transplant and provides evidence that generic products that are bioequivalent with the innovator product are also bioequivalent to each other. Trial registration ClinicalTrials.gov NCT01889758. PMID:29135993

Bioequivalence between innovator and generic tacrolimus in liver and kidney transplant recipients: A randomized, crossover clinical trial.

PubMed

Alloway, Rita R; Vinks, Alexander A; Fukuda, Tsuyoshi; Mizuno, Tomoyuki; King, Eileen C; Zou, Yuanshu; Jiang, Wenlei; Woodle, E Steve; Tremblay, Simon; Klawitter, Jelena; Klawitter, Jost; Christians, Uwe

2017-11-01

Although the generic drug approval process has a long-term successful track record, concerns remain for approval of narrow therapeutic index generic immunosuppressants, such as tacrolimus, in transplant recipients. Several professional transplant societies and publications have generated skepticism of the generic approval process. Three major areas of concern are that the pharmacokinetic properties of generic products and the innovator (that is, "brand") product in healthy volunteers may not reflect those in transplant recipients, bioequivalence between generic and innovator may not ensure bioequivalence between generics, and high-risk patients may have specific bioequivalence concerns. Such concerns have been fueled by anecdotal observations and retrospective and uncontrolled published studies, while well-designed, controlled prospective studies testing the validity of the regulatory bioequivalence testing approach for narrow therapeutic index immunosuppressants in transplant recipients have been lacking. Thus, the present study prospectively assesses bioequivalence between innovator tacrolimus and 2 generics in individuals with a kidney or liver transplant. From December 2013 through October 2014, a prospective, replicate dosing, partially blinded, randomized, 3-treatment, 6-period crossover bioequivalence study was conducted at the University of Cincinnati in individuals with a kidney (n = 35) or liver transplant (n = 36). Abbreviated New Drug Applications (ANDA) data that included manufacturing and healthy individual pharmacokinetic data for all generics were evaluated to select the 2 most disparate generics from innovator, and these were named Generic Hi and Generic Lo. During the 8-week study period, pharmacokinetic studies assessed the bioequivalence of Generic Hi and Generic Lo with the Innovator tacrolimus and with each other. Bioequivalence of the major tacrolimus metabolite was also assessed. All products fell within the US Food and Drug Administration (FDA) average bioequivalence (ABE) acceptance criteria of a 90% confidence interval contained within the confidence limits of 80.00% and 125.00%. Within-subject variability was similar for the area under the curve (AUC) (range 12.11-15.81) and the concentration maximum (Cmax) (range 17.96-24.72) for all products. The within-subject variability was utilized to calculate the scaled average bioequivalence (SCABE) 90% confidence interval. The calculated SCABE 90% confidence interval was 84.65%-118.13% and 80.00%-125.00% for AUC and Cmax, respectively. The more stringent SCABE acceptance criteria were met for all product comparisons for AUC and Cmax in both individuals with a kidney transplant and those with a liver transplant. European Medicines Agency (EMA) acceptance criteria for narrow therapeutic index drugs were also met, with the only exception being in the case of Brand versus Generic Lo, in which the upper limits of the 90% confidence intervals were 111.30% (kidney) and 112.12% (liver). These were only slightly above the upper EMA acceptance criteria limit for an AUC of 111.11%. SCABE criteria were also met for the major tacrolimus metabolite 13-O-desmethyl tacrolimus for AUC, but it failed the EMA criterion. No acute rejections, no differences in renal function in all individuals, and no differences in liver function were observed in individuals with a liver transplant using the Tukey honest significant difference (HSD) test for multiple comparisons. Fifty-two percent and 65% of all individuals with a kidney or liver transplant, respectively, reported an adverse event. The Exact McNemar test for paired categorical data with adjustments for multiple comparisons was used to compare adverse event rates among the products. No statistically significant differences among any pairs of products were found for any adverse event code or for adverse events overall. Limitations of this study include that the observations were made under strictly controlled conditions that did not allow for the impact of nonadherence or feeding on the possible pharmacokinetic differences. Generic Hi and Lo were selected based upon bioequivalence data in healthy volunteers because no pharmacokinetic data in recipients were available for all products. The safety data should be interpreted in light of the small number of participants and the short observation periods. Lastly, only the 1 mg tacrolimus strength was utilized in this study. Using an innovative, controlled bioequivalence study design, we observed equivalence between tacrolimus innovator and 2 generic products as well as between 2 generic products in individuals after kidney or liver transplantation following current FDA bioequivalence metrics. These results support the position that bioequivalence for the narrow therapeutic index drug tacrolimus translates from healthy volunteers to individuals receiving a kidney or liver transplant and provides evidence that generic products that are bioequivalent with the innovator product are also bioequivalent to each other. ClinicalTrials.gov NCT01889758.

Processing emotion from abstract art in frontotemporal lobar degeneration.

PubMed

Cohen, Miriam H; Carton, Amelia M; Hardy, Christopher J; Golden, Hannah L; Clark, Camilla N; Fletcher, Phillip D; Jaisin, Kankamol; Marshall, Charles R; Henley, Susie M D; Rohrer, Jonathan D; Crutch, Sebastian J; Warren, Jason D

2016-01-29

art may signal emotions independently of a biological or social carrier: it might therefore constitute a test case for defining brain mechanisms of generic emotion decoding and the impact of disease states on those mechanisms. This is potentially of particular relevance to diseases in the frontotemporal lobar degeneration (FTLD) spectrum. These diseases are often led by emotional impairment despite retained or enhanced artistic interest in at least some patients. However, the processing of emotion from art has not been studied systematically in FTLD. Here we addressed this issue using a novel emotional valence matching task on abstract paintings in patients representing major syndromes of FTLD (behavioural variant frontotemporal dementia, n=11; sematic variant primary progressive aphasia (svPPA), n=7; nonfluent variant primary progressive aphasia (nfvPPA), n=6) relative to healthy older individuals (n=39). Performance on art emotion valence matching was compared between groups taking account of perceptual matching performance and assessed in relation to facial emotion matching using customised control tasks. Neuroanatomical correlates of art emotion processing were assessed using voxel-based morphometry of patients' brain MR images. All patient groups had a deficit of art emotion processing relative to healthy controls; there were no significant interactions between syndromic group and emotion modality. Poorer art emotion valence matching performance was associated with reduced grey matter volume in right lateral occopitotemporal cortex in proximity to regions previously implicated in the processing of dynamic visual signals. Our findings suggest that abstract art may be a useful model system for investigating mechanisms of generic emotion decoding and aesthetic processing in neurodegenerative diseases. Copyright © 2015 The Authors. Published by Elsevier Ltd.. All rights reserved.

Nation-wide primary healthcare research network: a privacy protection assessment.

PubMed

De Clercq, Etienne; Van Casteren, Viviane; Bossuyt, Nathalie; Moreels, Sarah; Goderis, Geert; Bartholomeeusen, Stefaan; Bonte, Pierre; Bangels, Marc

2012-01-01

Efficiency and privacy protection are essential when setting up nationwide research networks. This paper investigates the extent to which basic services developed to support the provision of care can be re-used, whilst preserving an acceptable privacy protection level, within a large Belgian primary care research network. The generic sustainable confidentiality management model used to assess the privacy protection level of the selected network architecture is described. A short analysis of the current architecture is provided. Our generic model could also be used in other countries.

Dynamic information processing states revealed through neurocognitive models of object semantics

PubMed Central

Clarke, Alex

2015-01-01

Recognising objects relies on highly dynamic, interactive brain networks to process multiple aspects of object information. To fully understand how different forms of information about objects are represented and processed in the brain requires a neurocognitive account of visual object recognition that combines a detailed cognitive model of semantic knowledge with a neurobiological model of visual object processing. Here we ask how specific cognitive factors are instantiated in our mental processes and how they dynamically evolve over time. We suggest that coarse semantic information, based on generic shared semantic knowledge, is rapidly extracted from visual inputs and is sufficient to drive rapid category decisions. Subsequent recurrent neural activity between the anterior temporal lobe and posterior fusiform supports the formation of object-specific semantic representations – a conjunctive process primarily driven by the perirhinal cortex. These object-specific representations require the integration of shared and distinguishing object properties and support the unique recognition of objects. We conclude that a valuable way of understanding the cognitive activity of the brain is though testing the relationship between specific cognitive measures and dynamic neural activity. This kind of approach allows us to move towards uncovering the information processing states of the brain and how they evolve over time. PMID:25745632

A generic efficient adaptive grid scheme for rocket propulsion modeling

NASA Technical Reports Server (NTRS)

Mo, J. D.; Chow, Alan S.

1993-01-01

The objective of this research is to develop an efficient, time-accurate numerical algorithm to discretize the Navier-Stokes equations for the predictions of internal one-, two-dimensional and axisymmetric flows. A generic, efficient, elliptic adaptive grid generator is implicitly coupled with the Lower-Upper factorization scheme in the development of ALUNS computer code. The calculations of one-dimensional shock tube wave propagation and two-dimensional shock wave capture, wave-wave interactions, shock wave-boundary interactions show that the developed scheme is stable, accurate and extremely robust. The adaptive grid generator produced a very favorable grid network by a grid speed technique. This generic adaptive grid generator is also applied in the PARC and FDNS codes and the computational results for solid rocket nozzle flowfield and crystal growth modeling by those codes will be presented in the conference, too. This research work is being supported by NASA/MSFC.

Generic health/safety/environment cases

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kelland, A.N.; Primrose, M.; Pickles, J.C.

1996-12-31

A desire to implement HSE Management Systems including HSE Cases in all Shell companies operations prompted the development of a relational data base software package (THESIS) to provide a structured way of preparing an HSE Case. The software includes features which facilitate the management of {open_quotes}Keeping the Case Alive{close_quotes}, enabling the dissemination of tasks and hazard information to the workplace. During the software development it was recognized that a significant reduction could be made in the resources which would be required to prepare an HSE Case for each and every operation by the building of {open_quotes}Generic HSE Cases{close_quotes} addressing specificmore » activities which were repeated across the Company`s operations. This was recognized to be particularly valid for the smaller Single String Venture type of operations. The activities selected for the initial Generic HSE Case development include Land Drilling Operations, Land Seismic Acquisition, and Land Transport. To establish the Generic HSE Case, the THESIS data base is populated with data for a generic operation, identifying all the hazards and activities associated with that operation including all the associated controls, with established formats for the textual sections. In effect, the Generic Case defines the standards required for that type of operation. To generate an operation specific HSE Case, the Generic Case thereafter requires to be modified/adapted so that it represents the actual situation in the operation which it defines. This process includes itemization of all the operation specific details, and may involve the inclusion/deletion of any additional/existing activities or hazards together with their associated controls.« less

DOE Office of Scientific and Technical Information (OSTI.GOV)

Rutqvist, Jonny; Blanco Martin, Laura; Mukhopadhyay, Sumit

The modeling efforts in support of the field test planning conducted at LBNL leverage on recent developments of tools for modeling coupled thermal-hydrological-mechanical-chemical (THMC) processes in salt and their effect on brine migration at high temperatures. This work includes development related to, and implementation of, essential capabilities, as well as testing the model against relevant information and published experimental data related to the fate and transport of water. These are modeling capabilities that will be suitable for assisting in the design of field experiment, especially related to multiphase flow processes coupled with mechanical deformations, at high temperature. In this report,more » we first examine previous generic repository modeling results, focusing on the first 20 years to investigate the expected evolution of the different processes that could be monitored in a full-scale heater experiment, and then present new results from ongoing modeling of the Thermal Simulation for Drift Emplacement (TSDE) experiment, a heater experiment on the in-drift emplacement concept at the Asse Mine, Germany, and provide an update on the ongoing model developments for modeling brine migration. LBNL also supported field test planning activities via contributions to and technical review of framework documents and test plans, as well as participation in workshops associated with field test planning.« less

A Control Theory Model of Smoking

PubMed Central

Bobashev, Georgiy; Holloway, John; Solano, Eric; Gutkin, Boris

2017-01-01

We present a heuristic control theory model that describes smoking under restricted and unrestricted access to cigarettes. The model is based on the allostasis theory and uses a formal representation of a multiscale opponent process. The model simulates smoking behavior of an individual and produces both short-term (“loading up” after not smoking for a while) and long-term smoking patterns (e.g., gradual transition from a few cigarettes to one pack a day). By introducing a formal representation of withdrawal- and craving-like processes, the model produces gradual increases over time in withdrawal- and craving-like signals associated with abstinence and shows that after 3 months of abstinence, craving disappears. The model was programmed as a computer application allowing users to select simulation scenarios. The application links images of brain regions that are activated during the binge/intoxication, withdrawal, or craving with corresponding simulated states. The model was calibrated to represent smoking patterns described in peer-reviewed literature; however, it is generic enough to be adapted to other drugs, including cocaine and opioids. Although the model does not mechanistically describe specific neurobiological processes, it can be useful in prevention and treatment practices as an illustration of drug-using behaviors and expected dynamics of withdrawal and craving during abstinence. PMID:28868531

A Generic Self-Assembly Process in Microcompartments and Synthetic Protein Nanotubes.

PubMed

Uddin, Ismail; Frank, Stefanie; Warren, Martin J; Pickersgill, Richard W

2018-05-01

Bacterial microcompartments enclose a biochemical pathway and reactive intermediate within a protein envelope formed by the shell proteins. Herein, the orientation of the propanediol-utilization (Pdu) microcompartment shell protein PduA in bacterial microcompartments and in synthetic nanotubes, and the orientation of PduB in synthetic nanotubes are revealed. When produced individually, PduA hexamers and PduB trimers, tessellate to form flat sheets in the crystal, or they can self-assemble to form synthetic protein nanotubes in solution. Modelling the orientation of PduA in the 20 nm nanotube so as to preserve the shape complementarity and key interactions seen in the crystal structure suggests that the concave surface of the PduA hexamer faces out. This orientation is confirmed experimentally in synthetic nanotubes and in the bacterial microcompartment produced in vivo. The PduB nanotubes described here have a larger diameter, 63 nm, with the concave surface of the trimer again facing out. The conserved concave surface out characteristic of these nano-structures reveals a generic assembly process that causes the interface between adjacent subunits to bend in a common direction that optimizes shape complementarity and minimizes steric clashes. This understanding underpins engineering strategies for the biotechnological application of protein nanotubes. © 2018 The Authors. Published by WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Explore or Exploit? A Generic Model and an Exactly Solvable Case

NASA Astrophysics Data System (ADS)

Gueudré, Thomas; Dobrinevski, Alexander; Bouchaud, Jean-Philippe

2014-02-01

Finding a good compromise between the exploitation of known resources and the exploration of unknown, but potentially more profitable choices, is a general problem, which arises in many different scientific disciplines. We propose a stylized model for these exploration-exploitation situations, including population or economic growth, portfolio optimization, evolutionary dynamics, or the problem of optimal pinning of vortices or dislocations in disordered materials. We find the exact growth rate of this model for treelike geometries and prove the existence of an optimal migration rate in this case. Numerical simulations in the one-dimensional case confirm the generic existence of an optimum.

Utilisation of real-scale renewable energy test facility for validation of generic wind turbine and wind power plant controller models

DOE Office of Scientific and Technical Information (OSTI.GOV)

Zeni, Lorenzo; Hesselbæk, Bo; Bech, John

This article presents an example of application of a modern test facility conceived for experiments regarding the integration of renewable energy in the power system. The capabilities of the test facility are used to validate dynamic simulation models of wind power plants and their controllers. The models are based on standard and generic blocks. The successful validation of events related to the control of active power (control phenomena in <10 Hz range, including frequency control and power oscillation damping) is described, demonstrating the capabilities of the test facility and drawing the track for future work and improvements.

Explore or exploit? A generic model and an exactly solvable case.

PubMed

Gueudré, Thomas; Dobrinevski, Alexander; Bouchaud, Jean-Philippe

2014-02-07

Finding a good compromise between the exploitation of known resources and the exploration of unknown, but potentially more profitable choices, is a general problem, which arises in many different scientific disciplines. We propose a stylized model for these exploration-exploitation situations, including population or economic growth, portfolio optimization, evolutionary dynamics, or the problem of optimal pinning of vortices or dislocations in disordered materials. We find the exact growth rate of this model for treelike geometries and prove the existence of an optimal migration rate in this case. Numerical simulations in the one-dimensional case confirm the generic existence of an optimum.

Determination of the potential implementation impact of 2016 ministry of environmental protection generic assessment criteria for potentially contaminated sites in China.

PubMed

Cheng, Yuanyuan; Tang, Yu-Ting; Nathanail, C Paul

2017-04-12

The Ministry of Environmental Protection of China issued a 3rd draft edition of risk-based Generic Assessment Criteria (the MEP-GAC) in March 2016. Since these will be the first authoritative GAC in China, their implementation is likely to have a significant impact on China's growing contaminated land management sector. This study aims to determine the potential implementation impact of the MEP-GAC through an in-depth analysis of the management context, land use scenarios, health criteria values adopted and exposure pathways considered. The MEP-GAC have been proposed for two broad categories of land use scenarios for contaminated land risk assessment, and these two categories of land use scenarios need to be further delved, and a MEP-GAC for Chinese cultivated land scenario ought to be developed, to ensure human health protection of Chinese farmers. The MEP-GAC have adopted 10 -6 as the acceptable lifetime cancer risk, given the widespread extent and severe level of land contamination in China, consideration should be given to the decision on excess lifetime cancer risk of 10 -5 . During risk assessment process in practice, it is better to review the 20% TDI against local circumstances to determine their suitability before adopting it. The MEP-GAC are based on a SOM value of 1%, for regions with particularly high SOM, it might be necessary to develop regional GAC, due to SOM's significant impact on the GAC developed. An authoritative risk assessment model developed based on HJ25.3-2014 would help facilitate the DQRA process in practice. The MEP-GAC could better reflect the likely exposures of China's citizens due to vapour inhalation by using characteristics of Chinese exposure scenarios, including China-generic building stock, as inputs into the Johnson and Ettinger model as opposed to adoption of the US EPA parameters. The MEP-GAC once implemented will set the trajectory for the development of the investigation, assessment and remediation of land contamination for years.

Generic Software Architecture for Launchers

NASA Astrophysics Data System (ADS)

Carre, Emilien; Gast, Philippe; Hiron, Emmanuel; Leblanc, Alain; Lesens, David; Mescam, Emmanuelle; Moro, Pierre

2015-09-01

The definition and reuse of generic software architecture for launchers is not so usual for several reasons: the number of European launcher families is very small (Ariane 5 and Vega for these last decades); the real time constraints (reactivity and determinism needs) are very hard; low levels of versatility are required (implying often an ad hoc development of the launcher mission). In comparison, satellites are often built on a generic platform made up of reusable hardware building blocks (processors, star-trackers, gyroscopes, etc.) and reusable software building blocks (middleware, TM/TC, On Board Control Procedure, etc.). If some of these reasons are still valid (e.g. the limited number of development), the increase of the available CPU power makes today an approach based on a generic time triggered middleware (ensuring the full determinism of the system) and a centralised mission and vehicle management (offering more flexibility in the design and facilitating the long term maintenance) achievable. This paper presents an example of generic software architecture which could be envisaged for future launchers, based on the previously described principles and supported by model driven engineering and automatic code generation.

Changing the cost of care for chronic myeloid leukemia: the availability of generic imatinib in the USA and the EU.

PubMed

Conti, Rena M; Padula, William V; Larson, Richard A

2015-04-01

Imatinib is an oral tyrosine kinase inhibitor and considered to be the most successful targeted anti-cancer agent yet developed given its substantial efficacy in treating chronic myeloid leukemia (CML) and other malignant diseases. In the USA and the European Union (EU), Novartis' composition of matter patent on imatinib will expire in 2016. The potential impact on health system spending levels for CML after generic imatinib becomes available is the subject of significant interest among stakeholders. The extent of the potential savings largely depends on whether and to what extent prices decline and use stays the same or even increases. These are also empirical questions since the likely spending implications following generic imatinib's availability are predicated on multiple factors: physicians' willingness to prescribe generic imatinib, molecule characteristics, and health system priorities. This article discusses each of these issues in turn. We then review their implications for the development of country-specific cost-effectiveness models to predict the implications for cost and quality of care from generic imatinib.

Changing the cost of care for chronic myeloid leukemia: the availability of generic imatinib in the USA and the EU

PubMed Central

Padula, William V.; Larson, Richard A.

2015-01-01

Imatinib is an oral tyrosine kinase inhibitor and considered to be the most successful targeted anti-cancer agent yet developed given its substantial efficacy in treating chronic myeloid leukemia (CML) and other malignant diseases. In the USA and the European Union (EU), Novartis’ composition of matter patent on imatinib will expire in 2016. The potential impact on health system spending levels for CML after generic imatinib becomes available is the subject of significant interest among stakeholders. The extent of the potential savings largely depends on whether and to what extent prices decline and use stays the same or even increases. These are also empirical questions since the likely spending implications following generic imatinib’s availability are predicated on multiple factors: physicians’ willingness to prescribe generic imatinib, molecule characteristics, and health system priorities. This article discusses each of these issues in turn. We then review their implications for the development of country-specific cost-effectiveness models to predict the implications for cost and quality of care from generic imatinib. PMID:25814091

Endogenous versus exogenous generic reference pricing for pharmaceuticals.

PubMed

Antoñanzas, F; Juárez-Castelló, C A; Rodríguez-Ibeas, R

2017-12-01

In this paper we carry out a vertical differentiation duopoly model applied to pharmaceutical markets to analyze how endogenous and exogenous generic reference pricing influence competition between generic and branded drugs producers. Unlike the literature, we characterize for the exogenous case the equilibrium prices for all feasible relevant reference prices. Competition is enhanced after the introduction of a reference pricing system. We also compare both reference pricing systems on welfare grounds, assuming two different objective functions for health authorities: (i) standard social welfare and (ii) gross consumer surplus net of total pharmaceutical expenditures. We show that regardless of the objective function, health authorities will never choose endogenous reference pricing. When health authorities are paternalistic, the exogenous reference price that maximizes standard social welfare is such that the price of the generic drug is the reference price while the price of the branded drug is higher than the reference price. When health authorities are not paternalistic, the optimal exogenous reference price is such that the price of the branded drug is the reference price while the price of the generic drug is lower than the reference price.

Generic solar photovoltaic system dynamic simulation model specification

DOE Office of Scientific and Technical Information (OSTI.GOV)

Ellis, Abraham; Behnke, Michael Robert; Elliott, Ryan Thomas

This document is intended to serve as a specification for generic solar photovoltaic (PV) system positive-sequence dynamic models to be implemented by software developers and approved by the WECC MVWG for use in bulk system dynamic simulations in accordance with NERC MOD standards. Two specific dynamic models are included in the scope of this document. The first, a Central Station PV System model, is intended to capture the most important dynamic characteristics of large scale (> 10 MW) PV systems with a central Point of Interconnection (POI) at the transmission level. The second, a Distributed PV System model, is intendedmore » to represent an aggregation of smaller, distribution-connected systems that comprise a portion of a composite load that might be modeled at a transmission load bus.« less

Experimental and numerical analysis of natural bio and syngas swirl flames in a model gas turbine combustor

NASA Astrophysics Data System (ADS)

Iqbal, S.; Benim, A. C.; Fischer, S.; Joos, F.; Kluβ, D.; Wiedermann, A.

2016-10-01

Turbulent reacting flows in a generic swirl gas turbine combustor model are investigated both numerically and experimentally. In the investigation, an emphasis is placed upon the external flue gas recirculation, which is a promising technology for increasing the efficiency of the carbon capture and storage process, which, however, can change the combustion behaviour significantly. A further emphasis is placed upon the investigation of alternative fuels such as biogas and syngas in comparison to the conventional natural gas. Flames are also investigated numerically using the open source CFD software OpenFOAM. In the numerical simulations, a laminar flamelet model based on mixture fraction and reaction progress variable is adopted. As turbulence model, the SST model is used within a URANS concept. Computational results are compared with the experimental data, where a fair agreement is observed.

From medico-administrative databases analysis to care trajectories analytics: an example with the French SNDS.

PubMed

Drezen, Erwan; Guyet, Thomas; Happe, André

2018-02-01

Medico-administrative data like SNDS (Système National de Données de Santé) are not collected initially for epidemiological purposes. Moreover, the data model and the tools proposed to SNDS users make their in-depth exploitation difficult. We propose a data model, called the ePEPS model, based on healthcare trajectories to provide a medical view of raw data. A data abstraction process enables the clinician to have an intuitive medical view of raw data and to design a study-specific view. This view is based on a generic model of care trajectory, that is a sequence of time stamped medical events for a given patient. This model is combined with tools to manipulate care trajectories efficiently. © 2017 Société Française de Pharmacologie et de Thérapeutique.

A Roy model study of adapting to being HIV positive.

PubMed

Perrett, Stephanie E; Biley, Francis C

2013-10-01

Roy's adaptation model outlines a generic process of adaptation useful to nurses in any situation where a patient is facing change. To advance nursing practice, nursing theories and frameworks must be constantly tested and developed through research. This article describes how the results of a qualitative grounded theory study have been used to test components of the Roy adaptation model. A framework for "negotiating uncertainty" was the result of a grounded theory study exploring adaptation to HIV. This framework has been compared to the Roy adaptation model, strengthening concepts such as focal and contextual stimuli, Roy's definition of adaptation and her description of adaptive modes, while suggesting areas for further development including the role of perception. The comparison described in this article demonstrates the usefulness of qualitative research in developing nursing models, specifically highlighting opportunities to continue refining Roy's work.

Searching for gravitational waves from compact binaries with precessing spins

NASA Astrophysics Data System (ADS)

Harry, Ian; Privitera, Stephen; Bohé, Alejandro; Buonanno, Alessandra

2016-07-01

Current searches for gravitational waves from compact-object binaries with the LIGO and Virgo observatories employ waveform models with spins aligned (or antialigned) with the orbital angular momentum. Here, we derive a new statistic to search for compact objects carrying generic (precessing) spins. Applying this statistic, we construct banks of both aligned- and generic-spin templates for binary black holes and neutron star-black hole binaries, and compare the effectualness of these banks towards simulated populations of generic-spin systems. We then use these banks in a pipeline analysis of Gaussian noise to measure the increase in background incurred by using generic- instead of aligned-spin banks. Although the generic-spin banks have roughly a factor of ten more templates than the aligned-spin banks, we find an overall improvement in signal recovery at a fixed false-alarm rate for systems with high-mass ratio and highly precessing spins. This gain in sensitivity comes at a small loss of sensitivity (≲4 %) for systems that are already well covered by aligned-spin templates. Since the observation of even a single binary merger with misaligned spins could provide unique astrophysical insights into the formation of these sources, we recommend that the method described here be developed further to mount a viable search for generic-spin binary mergers in LIGO/Virgo data.

Generic waste management requirements for a controlled ecological life support system /CELSS/

NASA Technical Reports Server (NTRS)

Hoshizaki, T.; Hansen, B. D., III

1981-01-01

Regenerative life support systems for future space missions will require closure of the waste-food loop. Each mission application will generate specific requirements for the waste management system. However, there are generic input and output requirements that can be identified when a probable scenario is chosen. This paper discusses the generic requirements when higher plants are chosen as the primary food source. Attention is focused on the quality and quantity of nutrients necessary for culturing higher plants. The types of wastes to be processed are also discussed. In addition, requirements generated by growing plants on three different substrates are presented. This work suggests that the mineral composition of waste materials may require minimal adjustment to satisfy the plant requirements.

C3 System Performance Simulation and User Manual. Getting Started: Guidelines for Users

NASA Technical Reports Server (NTRS)

2006-01-01

This document is a User's Manual describing the C3 Simulation capabilities. The subject work was designed to simulate the communications involved in the flight of a Remotely Operated Aircraft (ROA) using the Opnet software. Opnet provides a comprehensive development environment supporting the modeling of communication networks and distributed systems. It has tools for model design, simulation, data collection, and data analysis. Opnet models are hierarchical -- consisting of a project which contains node models which in turn contain process models. Nodes can be fixed, mobile, or satellite. Links between nodes can be physical or wireless. Communications are packet based. The model is very generic in its current form. Attributes such as frequency and bandwidth can easily be modified to better reflect a specific platform. The model is not fully developed at this stage -- there are still more enhancements to be added. Current issues are documented throughout this guide.

Using Petri Net Tools to Study Properties and Dynamics of Biological Systems

PubMed Central

Peleg, Mor; Rubin, Daniel; Altman, Russ B.

2005-01-01

Petri Nets (PNs) and their extensions are promising methods for modeling and simulating biological systems. We surveyed PN formalisms and tools and compared them based on their mathematical capabilities as well as by their appropriateness to represent typical biological processes. We measured the ability of these tools to model specific features of biological systems and answer a set of biological questions that we defined. We found that different tools are required to provide all capabilities that we assessed. We created software to translate a generic PN model into most of the formalisms and tools discussed. We have also made available three models and suggest that a library of such models would catalyze progress in qualitative modeling via PNs. Development and wide adoption of common formats would enable researchers to share models and use different tools to analyze them without the need to convert to proprietary formats. PMID:15561791

Modeling HIV/AIDS Drug Price Determinants in Brazil: Is Generic Competition a Myth?

PubMed Central

Meiners, Constance; Sagaon-Teyssier, Luis; Hasenclever, Lia; Moatti, Jean-Paul

2011-01-01

Background Brazil became the first developing country to guarantee free and universal access to HIV/AIDS treatment, with antiretroviral drugs (ARVs) being delivered to nearly 190,000 patients. The analysis of ARV price evolution and market dynamics in Brazil can help anticipate issues soon to afflict other developing countries, as the 2010 revision of the World Health Organization guidelines shifts demand towards more expensive treatments, and, at the same time, current evolution of international legislation and trade agreements on intellectual property rights may reduce availability of generic drugs for HIV care. Methods and Findings Our analyses are based on effective prices paid for ARV procurement in Brazil between 1996 and 2009. Data panel structure was exploited to gather ex-ante and ex-post information and address various sources of statistical bias. In-difference estimation offered in-depth information on ARV market characteristics which significantly influence prices. Although overall ARV prices follow a declining trend, changing characteristics in the generic segment help explain recent increase in generic ARV prices. Our results show that generic suppliers are more likely to respond to factors influencing demand size and market competition, while originator suppliers tend to set prices strategically to offset compulsory licensing threats and generic competition. Significance In order to guarantee the long term sustainability of access to antiretroviral treatment, our findings highlight the importance of preserving and stimulating generic market dynamics to sustain developing countries' bargaining power in price negotiations undertaken with originator companies. PMID:21858138

Modeling HIV/AIDS drug price determinants in Brazil: is generic competition a myth?

PubMed

Meiners, Constance; Sagaon-Teyssier, Luis; Hasenclever, Lia; Moatti, Jean-Paul

2011-01-01

Brazil became the first developing country to guarantee free and universal access to HIV/AIDS treatment, with antiretroviral drugs (ARVs) being delivered to nearly 190,000 patients. The analysis of ARV price evolution and market dynamics in Brazil can help anticipate issues soon to afflict other developing countries, as the 2010 revision of the World Health Organization guidelines shifts demand towards more expensive treatments, and, at the same time, current evolution of international legislation and trade agreements on intellectual property rights may reduce availability of generic drugs for HIV care. Our analyses are based on effective prices paid for ARV procurement in Brazil between 1996 and 2009. Data panel structure was exploited to gather ex-ante and ex-post information and address various sources of statistical bias. In-difference estimation offered in-depth information on ARV market characteristics which significantly influence prices. Although overall ARV prices follow a declining trend, changing characteristics in the generic segment help explain recent increase in generic ARV prices. Our results show that generic suppliers are more likely to respond to factors influencing demand size and market competition, while originator suppliers tend to set prices strategically to offset compulsory licensing threats and generic competition. In order to guarantee the long term sustainability of access to antiretroviral treatment, our findings highlight the importance of preserving and stimulating generic market dynamics to sustain developing countries' bargaining power in price negotiations undertaken with originator companies.

Cost-effectiveness Analysis of Denosumab in the Prevention of Skeletal-related Events in Patients with Prostate Cancer in Kazakhstan.

PubMed

Bektur, Carina; Nurgozhin, Talgat

2014-01-01

Bone mass loss (BML) is one of the adverse effects of oncological chemotherapy, especially in cases of hormonal types of cancer, such as a prostate cancer (PC). BML is strongly associated with skeletal-related events (SREs), therefore decreasing the quality of patient's life. Denosumab shows an advantage over zoledronic acid (ZA) in delaying the first onset of SREs and subsequent SREs in adults with PC in several phase III clinical trials. Since generic ZA recently became available, the purpose of the present study was to assess the cost-effectiveness of denosumab vs. brand or generic ZA in the prevention of SREs in Kazakhstani patients with PC. A Markov model was constructed in Tree-Age Pro 2013 software program with 4-week model cycles to analyze the cost-effectiveness of the treatments from the perspective of Ministry of Health (MoH) over a 10-year PC cohort. Direct costs (in Kazakhstani monetary units "tenge" in 2014) included costs of drug, SRE (pathologic fracture, surgery to bone, radiation to bone, spinal cord compression), and adverse events treatment. All costs were discounted for 3% per year. Effectiveness was appraised based on the number of SREs. Health states were defined according to SRE occurrence, SRE history, and death. The model assumed that a maximum of 1 SRE could occur in each cycle. Transition probabilities were derived from the relevant phase III trials. Results were present in the incremental total cost per SRE avoided. One-way sensitivity analyses were performed to examine the robustness of the model. Over the 10-year period, denosumab incurred 103,091 tenge higher costs than brand ZA, 677,133 tenge higher costs than generic ZA, and 0.58 fewer SREs per patient with PC. The estimated incremental total direct costs per SRE avoided with the use of denosumab were 177,743 tenge (instead of brand ZA) and 1,167,470 tenge (instead of generic ZA). Results were robust to one-way sensitivity analyses. With the assumption that brand and generic ZAs are equally effective in the prevention of SREs in PC patients, denosumab seems to be a cost-effective alternative for brand ZA (insignificant difference in costs - less than 5%) and a costly alternative for generic ZA from the perspective of MoH of Kazakhstan.

A Case for a Process Approach: The Warwick Experience.

ERIC Educational Resources Information Center

Screen, P.

1988-01-01

Describes the cyclical nature of a problem-solving sequence produced from observing children involved in the process. Discusses the generic qualities of science: (1) observing; (2) inferring; (3) classifying; (4) predicting; (5) controlling variables; and (6) hypothesizing. Explains the processes in use and advantages of a process-led course. (RT)

Development of a Turbofan Engine Simulation in a Graphical Simulation Environment

NASA Technical Reports Server (NTRS)

Parker, Khary I.; Guo, Ten-Heui

2003-01-01

This paper presents the development of a generic component level model of a turbofan engine simulation with a digital controller, in an advanced graphical simulation environment. The goal of this effort is to develop and demonstrate a flexible simulation platform for future research in propulsion system control and diagnostic technology. A previously validated FORTRAN-based model of a modern, high-performance, military-type turbofan engine is being used to validate the platform development. The implementation process required the development of various innovative procedures, which are discussed in the paper. Open-loop and closed-loop comparisons are made between the two simulations. Future enhancements that are to be made to the modular engine simulation are summarized.

Engine Data Interpretation System (EDIS)

NASA Technical Reports Server (NTRS)

Cost, Thomas L.; Hofmann, Martin O.

1990-01-01

A prototype of an expert system was developed which applies qualitative or model-based reasoning to the task of post-test analysis and diagnosis of data resulting from a rocket engine firing. A combined component-based and process theory approach is adopted as the basis for system modeling. Such an approach provides a framework for explaining both normal and deviant system behavior in terms of individual component functionality. The diagnosis function is applied to digitized sensor time-histories generated during engine firings. The generic system is applicable to any liquid rocket engine but was adapted specifically in this work to the Space Shuttle Main Engine (SSME). The system is applied to idealized data resulting from turbomachinery malfunction in the SSME.

Leverage and Delegation in Developing an Information Model for Geology

NASA Astrophysics Data System (ADS)

Cox, S. J.

2007-12-01

GeoSciML is an information model and XML encoding developed by a group of primarily geologic survey organizations under the auspices of the IUGS CGI. The scope of the core model broadly corresponds with information traditionally portrayed on a geologic map, viz. interpreted geology, some observations, the map legend and accompanying memoir. The development of GeoSciML has followed the methodology specified for an Application Schema defined by OGC and ISO 19100 series standards. This requires agreement within a community concerning their domain model, its formal representation using UML, documentation as a Feature Type Catalogue, with an XML Schema implementation generated from the model by applying a rule-based transformation. The framework and technology supports a modular governance process. Standard datatypes and GI components (geometry, the feature and coverage metamodels, metadata) are imported from the ISO framework. The observation and sampling model (including boreholes) is imported from OGC. The scale used for most scalar literal values (terms, codes, measures) allows for localization where necessary. Wildcards and abstract base- classes provide explicit extensibility points. Link attributes appear in a regular way in the encodings, allowing reference to external resources using URIs. The encoding is compatible with generic GI data-service interfaces (WFS, WMS, SOS). For maximum interoperability within a community, the interfaces may be specialised through domain-specified constraints (e.g. feature-types, scale and vocabulary bindings, query-models). Formalization using UML and XML allows use of standard validation and processing tools. Use of upper-level elements defined for generic GI application reduces the development effort and governance resonsibility, while maximising cross-domain interoperability. On the other hand, enabling specialization to be delegated in a controlled manner is essential to adoption across a range of subdisciplines and jurisdictions. The GeoSciML design team is responsible only for the part of the model that is unique to geology but for which general agreement can be reached within the domain. This paper is presented on behalf of the Interoperability Working Group of the IUGS Commission for Geoscience Information (CGI) - follow web-link for details of the membership.

Uncovering molecular processes in crystal nucleation and growth by using molecular simulation.

PubMed

Anwar, Jamshed; Zahn, Dirk

2011-02-25

Exploring nucleation processes by molecular simulation provides a mechanistic understanding at the atomic level and also enables kinetic and thermodynamic quantities to be estimated. However, whilst the potential for modeling crystal nucleation and growth processes is immense, there are specific technical challenges to modeling. In general, rare events, such as nucleation cannot be simulated using a direct "brute force" molecular dynamics approach. The limited time and length scales that are accessible by conventional molecular dynamics simulations have inspired a number of advances to tackle problems that were considered outside the scope of molecular simulation. While general insights and features could be explored from efficient generic models, new methods paved the way to realistic crystal nucleation scenarios. The association of single ions in solvent environments, the mechanisms of motif formation, ripening reactions, and the self-organization of nanocrystals can now be investigated at the molecular level. The analysis of interactions with growth-controlling additives gives a new understanding of functionalized nanocrystals and the precipitation of composite materials. Copyright © 2011 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Digital Charge Coupled Device (CCD) Camera System Architecture

NASA Astrophysics Data System (ADS)

Babey, S. K.; Anger, C. D.; Green, B. D.

1987-03-01

We propose a modeling system for generic objects in order to recognize different objects from the same category with only one generic model. The representation consists of a prototype, represented by parts and their configuration. Parts are modeled by superquadric volumetric primitives which are combined via Boolean operations to form objects. Variations between objects within a category are described by allowable changes in structure and shape deformations of prototypical parts. Each prototypical part and relation has a set of associated features that can be recognized in the images. These features are used for selecting models from the model data base. The selected hypothetical models are then verified on the geometric level by deforming the prototype in allowable ways to match the data. We base our design of the modeling system upon the current psychological theories of categorization and of human visual perception.