Geologic map of the Lazy Y Point Quadrangle, Moffat County Colorado

USGS Publications Warehouse

Van Loenen, R. E.; Selner, G.I.; Bryant, W.A.

1999-01-01

The Lazy Y Point quadrangle is in northwestern Colorado a few miles north of Rangely. The prominent structural feature of the Lazy Y Point quadrangle is the Skull Creek monocline. Pennsylvanian rocks are exposed along the axis of the monocline while hogbacks along its southern flank expose rocks that are from Permian to Upper Cretaceous in age. The Wolf Creek monocline and the Wolf Creek thrust fault, which dissects the monocline, are salient structural features in the northern part of the quadrangle. Little or no mineral potential exists within the quadrangle. A geologic map of the Skull Creek quadrangle, which is adjacent to the Lazy Y Point quadrangle on the east, is also available (Geologic Investigations Series I-2647). This companian map shows similar geologic features, including the eastern half of the Skull Creek monocline. The geology of this quadrangle was mapped because of its proximity to Dinosaur National Monument. It is adjacent to quadrangles previously mapped to display the geology of this very scenic and popular National Monument. The Lazy Y Point quadrangle includes parts of the Willow and Skull Creek Wilderness Study Areas, which were assessed for their mineral resource potential.

Publications - GMC 104 | Alaska Division of Geological & Geophysical

Science.gov Websites

and Facilities Staff Seismic and Well Data Data Reports Contact Us Frequently Asked Questions Ask a microfossils from cuttings of Kavearak Point 32-25 well Authors: Unknown Publication Date: 1988 Publisher Point 32-25 well: Alaska Division of Geological & Geophysical Surveys Geologic Materials Center Data

The application of structure from motion (SfM) to identify the geological structure and outcrop studies

NASA Astrophysics Data System (ADS)

Saputra, Aditya; Rahardianto, Trias; Gomez, Christopher

2017-07-01

Adequate knowledge of geological structure is an essential for most studies in geoscience, mineral exploration, geo-hazard and disaster management. The geological map is still one the datasets the most commonly used to obtain information about the geological structure such as fault, joint, fold, and unconformities, however in rural areas such as Central Java data is still sparse. Recent progress in data acquisition technologies and computing have increased the interest in how to capture the high-resolution geological data effectively and for a relatively low cost. Some methods such as Airborne Laser Scanning (ALS), Terrestrial Laser Scanning (TLS), and Unmanned Aerial Vehicles (UAVs) have been widely used to obtain this information, however, these methods need a significant investment in hardware, software, and time. Resolving some of those issues, the photogrammetric method structure from motion (SfM) is an image-based method, which can provide solutions equivalent to laser technologies for a relatively low-cost with minimal time, specialization and financial investment. Using SfM photogrammetry, it is possible to generate high resolution 3D images rock surfaces and outcrops, in order to improve the geological understanding of Indonesia. In the present contribution, it is shown that the information about fault and joint can be obtained at high-resolution and in a shorter time than with the conventional grid mapping and remotely sensed topographic surveying. The SfM method produces a point-cloud through image matching and computing. This task can be run with open- source or commercial image processing and 3D reconstruction software. As the point cloud has 3D information as well as RGB values, it allows for further analysis such as DEM extraction and image orthorectification processes. The present paper describes some examples of SfM to identify the fault in the outcrops and also highlight the future possibilities in terms of earthquake hazard assessment, based on fieldwork in the South of Yogyakarta City.

Onshore and offshore geologic map of the Coal Oil Point area, southern California

USGS Publications Warehouse

Dartnell, Pete; Conrad, James E.; Stanley, Richard G.; Guy R. Cochrane, Guy R.

2011-01-01

Geologic maps that span the shoreline and include both onshore and offshore areas are potentially valuable tools that can lead to a more in depth understanding of coastal environments. Such maps can contribute to the understanding of shoreline change, geologic hazards, both offshore and along-shore sediment and pollutant transport. They are also useful in assessing geologic and biologic resources. Several intermediate-scale (1:100,000) geologic maps that include both onshore and offshore areas (herein called onshore-offshore geologic maps) have been produced of areas along the California coast (see Saucedo and others, 2003; Kennedy and others, 2007; Kennedy and Tan, 2008), but few large-scale (1:24,000) maps have been produced that can address local coastal issues. A cooperative project between Federal and State agencies and universities has produced an onshore-offshore geologic map at 1:24,000 scale of the Coal Oil Point area and part of the Santa Barbara Channel, southern California (fig. 1). As part of the project, the U.S. Geological Survey (USGS) and the California Geological Survey (CGS) hosted a workshop (May 2nd and 3rd, 2007) for producers and users of coastal map products (see list of participants) to develop a consensus on the content and format of onshore-offshore geologic maps (and accompanying GIS files) so that they have relevance for coastal-zone management. The USGS and CGS are working to develop coastal maps that combine geospatial information from offshore and onshore and serve as an important tool for addressing a broad range of coastal-zone management issues. The workshop was divided into sessions for presentations and discussion of bathymetry and topography, geology, and habitat products and needs of end users. During the workshop, participants reviewed existing maps and discussed their merits and shortcomings. This report addresses a number of items discussed in the workshop and details the onshore and offshore geologic map of the Coal Oil Point area. Results from this report directly address issues raised in the California Ocean Protection Act (COPA) Five Year Strategic Plan. For example, one of the guiding principles of the COPA five-year strategic plan is to 'Recognize the interconnectedness of the land and the sea, supporting sustainable uses of the coast and ensuring the health of ecosystems.' Results from this USGS report directly connect the land and sea with the creation of both a seamless onshore and offshore digital terrain model (DTM) and geologic map. One of the priority goals (and objectives) of the COPA plan is to 'monitor and map the ocean environment to provide data about conditions and trends.' Maps within this report provide land and sea geologic information for mapping and monitoring nearshore sediment processes, pollution transport, and sea-level rise and fall.

Stochastic simulation by image quilting of process-based geological models

NASA Astrophysics Data System (ADS)

Hoffimann, Júlio; Scheidt, Céline; Barfod, Adrian; Caers, Jef

2017-09-01

Process-based modeling offers a way to represent realistic geological heterogeneity in subsurface models. The main limitation lies in conditioning such models to data. Multiple-point geostatistics can use these process-based models as training images and address the data conditioning problem. In this work, we further develop image quilting as a method for 3D stochastic simulation capable of mimicking the realism of process-based geological models with minimal modeling effort (i.e. parameter tuning) and at the same time condition them to a variety of data. In particular, we develop a new probabilistic data aggregation method for image quilting that bypasses traditional ad-hoc weighting of auxiliary variables. In addition, we propose a novel criterion for template design in image quilting that generalizes the entropy plot for continuous training images. The criterion is based on the new concept of voxel reuse-a stochastic and quilting-aware function of the training image. We compare our proposed method with other established simulation methods on a set of process-based training images of varying complexity, including a real-case example of stochastic simulation of the buried-valley groundwater system in Denmark.

Geologic characterization of shelf areas using usSEABED for GIS mapping, modeling processes and assessing marine sand and gravel resources

USGS Publications Warehouse

Williams, S.J.; Bliss, J.D.; Arsenault, M.A.; Jenkins, C.J.; Goff, J.A.

2007-01-01

Geologic maps depicting offshore sedimentary features serve many scientific and applied purposes. Such maps have been lacking, but recent computer technology and software offer promise in the capture and display of diverse marine data. Continental margins contain landforms which provide a variety of important functions and contain important sedimentary records. Some shelf areas also contain deposits regarded as potential aggregate resources. Because proper management of coastal and offshore areas is increasingly important, knowledge of the framework geology and marine processes is critical. Especially valuable are comprehensive and integrated digital databases based on high-quality information from original sources. Products of interest are GIS maps containing thematic information, such as sediment character and texture. These products are useful to scientists modeling nearshore and shelf processes as well as planners and managers. The U.S. Geological Survey is leading a national program to gather a variety of extant marine geologic data into the usSEABED database system. This provides centralized, integrated marine geologic data collected over the past 50 years. To date, over 340,000 sediment data points from the U.S. reside in usSEABED, which combines an array of physical data and analytical and descriptive information about the sea floor and are available to the marine community through three USGS data reports for the Atlantic, Gulf of Mexico, and Pacific published in 2006, and the project web sites: (http://woodshole.er.usg s.gov/project-pages/aggregates/ and http://walrus.wr.usgs.gov/usseabed/)

Study on the Integrated Geophysic Methods and Application of Advanced Geological Detection for Complicated Tunnel

NASA Astrophysics Data System (ADS)

Zhou, L.; Xiao, G.

2014-12-01

The engineering geological and hydrological conditions of current tunnels are more and more complicated, as the tunnels are elongated with deeper depth. In constructing these complicated tunnels, geological hazards prone to occur as induced by unfavorable geological bodies, such as fault zones, karst or hydrous structures, etc. The working emphasis and difficulty of the advanced geological exploration for complicated tunnels are mainly focused on the structure and water content of these unfavorable geological bodies. The technical aspects of my paper systematically studied the advanced geological exploration theory and application aspects for complicated tunnels, with discussion on the key technical points and useful conclusions. For the all-aroundness and accuracy of advanced geological exploration results, the objective of my paper is targeted on the comprehensive examination on the structure and hydrous characteristic of the unfavorable geological bodies in complicated tunnels. By the multi-component seismic modeling on a more real model containing the air medium, the wave field response characteristics of unfavorable geological bodies can be analyzed, thus providing theoretical foundation for the observation system layout, signal processing and interpretation of seismic methods. Based on the tomographic imaging theory of seismic and electromagnetic method, 2D integrated seismic and electromagnetic tomographic imaging and visualization software was designed and applied in the advanced drilling hole in the tunnel face, after validation of the forward and inverse modeling results on theoretical models. The transmission wave imaging technology introduced in my paper can be served as a new criterion for detection of unfavorable geological bodies. After careful study on the basic theory, data processing and interpretation, practical applications of TSP and ground penetrating radar (GPR) method, as well as serious examination on their application examples, my paper formulated a suite of comprehensive application system of seismic and electromagnetic methods for the advanced geological exploration of complicated tunnels. This research is funded by National Natural Science Foundation of China (Grant No. 41202223) .

Geological nominations at UNESCO World Heritage, an upstream struggle

NASA Astrophysics Data System (ADS)

Olive-Garcia, Cécile; van Wyk de Vries, Benjamin

2017-04-01

Using my 10 years experience in setting up and defending a UNESCO world Heritage Geological nomination, this presentation aims to give a personal insight into this international process and the differential use of science, subjective perception (aesthetic and 'naturality'), and politics. At this point in the process, new protocols have been tested in order to improve the dialogue, accountability and transparency between the different stake-holders. These are, the State parties, the IUCN, the scientific community, and UNESCO itself. Our proposal is the Chaîne des Puys-Limagne fault ensemble, which combines tectonic, geomorphological evolution and volcanology. The project's essence is a conjunction of inseparable geological features and processes, set in the context of plate tectonics. This very unicit yof diverse forms and processes creates the value of the site. However, it is just this that has caused a problem, as the advisory body has a categorical approach of nominations that separates items to assess them in an unconnected manner.From the start we proposed a combined approach, where a property is seen in its entirety, and the constituent elements seen as interlinked elements reflecting the joint underlying phenomena. At this point, our project has received the first ever open review by an independent technical mission (jointly set up by IUCN, UNESCO and the State party). The subsequent report was broadly supportive of the project's approach and of the value of the ensemble of features. The UNESCO committee in 2016, re-referred the nomination, acknowledging the potential Outstanding Universal Value of the site and requesting the parties to continue the upstream process (e.g. collaborative work), notably on the recommendations and conclusions of the Independent Technical mission report. Meetings are continuing, and I shall provide you with the hot-off-the-press news as this ground breaking nomination progresses.

Biological and geochemical data along Indian Point, Vermilion Bay, Louisiana

USGS Publications Warehouse

Richwine, Kathryn A.; Marot, Marci E.; Smith, Christopher G.; Osterman, Lisa E.; Adams, C. Scott

2015-09-14

This publication was prepared by an agency of the United States Government. Although these data were processed successfully on a computer system at the U.S. Geological Survey, no warranty expressed or implied is made regarding the display or utility of the data on any other system, or for general or scientific purposes, nor shall the act of distribution imply any such warranty. The U.S. Geological Survey shall not be held liable for improper or incorrect use of the data described and (or) contained herein. Reference herein to any specific commercial product, process, or service by trade name, trademark, manufacturer, or otherwise does not constitute or imply its endorsement, recommendation, or favoring by the United States Government or any agency

Geologic evolution of the terrestrial planets

NASA Technical Reports Server (NTRS)

Head, J. W.; Mutch, T. A.; Wood, C. A.

1977-01-01

The paper presents a geologic comparison of the terrestrial planets Mercury, Venus, Earth, the Moon and Mars, in the light of the recent photogeologic and other evidence gathered by satellites, and discusses the relationships between their regional terrain types, ages, and planetary evolution. The importance of the two fundamental processes, impact cratering and volcanism, which had formed these planets are stressed and the factors making the earth unique, such as high planetary evolution index (PEI), dynamic geological agents and the plate tectonics, are pointed out. The igneous processes which dominate earth and once existed on the others are outlined together with the planetary elevations of the earth which has a bimodal distribution, the moon which has a unimodal Gaussian distribution and Mars with a distribution intermediate between the earth and moon. Questions are raised concerning the existence of a minimum planetary mass below which mantle convection will not cause lithospheric rifting, and as to whether each planet follows a separate path of evolution depending on its physical properties and position within the solar system.

A proposed new framework for valorization of geoheritage in Norway

NASA Astrophysics Data System (ADS)

Dahl, Rolv; Bergengren, Anna; Heldal, Tom

2015-04-01

The geological history of Norway is a complex one, . The exploitation of geological resources of different kinds has always provided the backbone of the Norwegian community. Nevertheless, the perception of geology and the geological processes that created the landscape is little appreciated, compared to bio-diversity and cultural heritage. Some geological localities play an important role in our perception and scientific understanding of the landscape. Other localities are, or could be, important tourist destinations. Other localities can in turn be important for geoscience education on all levels, whereas other plays a major role in the understanding of geodiversity and geoheritage and should be protected as natural monuments. A database based on old registrations has been compiled and a web mapping server is recently launched based on old and new registrations. However, no systematical classification and identification of important sites has been done for the last thirty years. We are now calling for a crowdsourcing process in the geological community in order to validate and valorize the registrations, as well as defining new points and areas of interest. Furthermore, we are developing a valorization system for these localities. The framework for this system is based on studies from inventories in other countries, as well as suggestions from ProGeo. The aim is to raise awareness of important sites, and how they are treated and utilized for scientific, or educational purposes, as tourist destinations or heritage sites. Our presentation will focus on the development of the framework and its implications.

Parameter Estimation of Fossil Oysters from High Resolution 3D Point Cloud and Image Data

NASA Astrophysics Data System (ADS)

Djuricic, Ana; Harzhauser, Mathias; Dorninger, Peter; Nothegger, Clemens; Mandic, Oleg; Székely, Balázs; Molnár, Gábor; Pfeifer, Norbert

2014-05-01

A unique fossil oyster reef was excavated at Stetten in Lower Austria, which is also the highlight of the geo-edutainment park 'Fossilienwelt Weinviertel'. It provides the rare opportunity to study the Early Miocene flora and fauna of the Central Paratethys Sea. The site presents the world's largest fossil oyster biostrome formed about 16.5 million years ago in a tropical estuary of the Korneuburg Basin. About 15,000 up to 80-cm-long shells of Crassostrea gryphoides cover a 400 m2 large area. Our project 'Smart-Geology for the World's largest fossil oyster reef' combines methods of photogrammetry, geology and paleontology to document, evaluate and quantify the shell bed. This interdisciplinary approach will be applied to test hypotheses on the genesis of the taphocenosis (e.g.: tsunami versus major storm) and to reconstruct pre- and post-event processes. Hence, we are focusing on using visualization technologies from photogrammetry in geology and paleontology in order to develop new methods for automatic and objective evaluation of 3D point clouds. These will be studied on the basis of a very dense surface reconstruction of the oyster reef. 'Smart Geology', as extension of the classic discipline, exploits massive data, automatic interpretation, and visualization. Photogrammetry provides the tools for surface acquisition and objective, automated interpretation. We also want to stress the economic aspect of using automatic shape detection in paleontology, which saves manpower and increases efficiency during the monitoring and evaluation process. Currently, there are many well known algorithms for 3D shape detection of certain objects. We are using dense 3D laser scanning data from an instrument utilizing the phase shift measuring principle, which provides accurate geometrical basis < 3 mm. However, the situation is difficult in this multiple object scenario where more than 15,000 complete or fragmentary parts of an object with random orientation are found. The goal is to investigate if the application of state-of-the-art 3D digitizing, data processing, and visualization technologies support the interpretation of this paleontological site. The obtained 3D data (approx. 1 billion points at the respective area) is analyzed with respect to their 3D structure in order to derive geometrical information. The aim of this contribution is to segment the 3D point cloud of laser scanning data into meaningful regions representing particular objects. Geometric parameters (curvature, tangent plane orientation, local minimum and maximum, etc.) are derived for every 3D point of the point cloud. A set of features is computed in each point using different kernel sizes to define neighborhoods of different size. This provides information on convexity (outer surface), concavity (inner surface) and locally flat areas, which shall be further utilized in fitting model of Crassostrea-shells. In addition, digitizing is performed manually in order to obtain a representative set of reference data for the evaluation of the obtained results. For evaluating these results the reference data (length and orientation of specimen) is then compared to the automatically derived segments of the point cloud. The study is supported by the Austrian Science Fund (FWF P 25883-N29).

Geologic map of the Chewelah 30' x 60' Quadrangle, Washington and Idaho

USGS Publications Warehouse

Miller, F.K.

2001-01-01

This data set maps and describes the geology of the Chewelah 30' X 60' quadrangle, Washington and Idaho. Created using Environmental Systems Research Institute's ARC/INFO software, the data base consists of the following items: (1) a map coverage containing geologic contacts and units, (2) a point coverage containing site-specific geologic structural data, (3) two coverages derived from 1:100,000 Digital Line Graphs (DLG); one of which represents topographic data, and the other, cultural data, (4) two line coverages that contain cross-section lines and unit-label leaders, respectively, and (5) attribute tables for geologic units (polygons), contacts (arcs), and site-specific data (points). In addition, the data set includes the following graphic and text products: (1) A PostScript graphic plot-file containing the geologic map, topography, cultural data, and two cross sections, and on a separate sheet, a Correlation of Map Units (CMU) diagram, an abbreviated Description of Map Units (DMU), modal diagrams for granitic rocks, an index map, a regional geologic and structure map, and a key for point and line symbols; (2) PDF files of the Readme text-file and expanded Description of Map Units (DMU), and (3) this metadata file. The geologic map database contains original U.S. Geological Survey data generated by detailed field observation and by interpretation of aerial photographs. The map was compiled from geologic maps of eight 1:48,000 15' quadrangle blocks, each of which was made by mosaicing and reducing the four constituent 7.5' quadrangles. These 15' quadrangle blocks were mapped chiefly at 1:24,000 scale, but the detail of the mapping was governed by the intention that it was to be compiled at 1:48,000 scale. The compilation at 1:100,000 scale entailed necessary simplification in some areas and combining of some geologic units. Overall, however, despite a greater than two times reduction in scale, most geologic detail found on the 1:48,000 maps is retained on the 1:100,000 map. Geologic contacts across boundaries of the eight constituent quadrangles required minor adjustments, but none significant at the final 1:100,000 scale. The geologic map was compiled on a base-stable cronoflex copy of the Chewelah 30' X 60' topographic base and then scribed. The scribe guide was used to make a 0.007 mil-thick blackline clear-film, which was scanned at 1200 DPI by Optronics Specialty Company, Northridge, California. This image was converted to vector and polygon GIS layers and minimally attributed by Optronics Specialty Company. Minor hand-digitized additions were made at the USGS. Lines, points, and polygons were subsequently edited at the USGS by using standard ARC/INFO commands. Digitizing and editing artifacts significant enough to display at a scale of 1:100,000 were corrected. Within the database, geologic contacts are represented as lines (arcs), geologic units as polygons, and site-specific data as points. Polygon, arc, and point attribute tables (.pat, .aat, and .pat, respectively) uniquely identify each geologic datum.

Geologic Map of the Tucson and Nogales Quadrangles, Arizona (Scale 1:250,000): A Digital Database

USGS Publications Warehouse

Peterson, J.A.; Berquist, J.R.; Reynolds, S.J.; Page-Nedell, S. S.; Digital database by Oland, Gustav P.; Hirschberg, Douglas M.

2001-01-01

The geologic map of the Tucson-Nogales 1:250,000 scale quadrangle (Peterson and others, 1990) was digitized by U.S. Geological Survey staff and University of Arizona contractors at the Southwest Field Office, Tucson, Arizona, in 2000 for input into a geographic information system (GIS). The database was created for use as a basemap in a decision support system designed by the National Industrial Minerals and Surface Processes project. The resulting digital geologic map database can be queried in many ways to produce a variety of geologic maps. Digital base map data files (topography, roads, towns, rivers and lakes, etc.) are not included; they may be obtained from a variety of commercial and government sources. Additionally, point features, such as strike and dip, were not captured from the original paper map and are not included in the database. This database is not meant to be used or displayed at any scale larger than 1:250,000 (for example, 1:100,000 or 1:24,000). The digital geologic map graphics and plot files that are provided in the digital package are representations of the digital database. They are not designed to be cartographic products.

Gulf Coast Salt Domes geologic Area Characterization Report, East Texas Study Area. Volume II. Technical report. [Contains glossary of geological terms; Oakwood, Keechi, and Palestine domes

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

1982-07-01

The East Texas Area Characterization Report (ACR) is a compilation of data gathered during the Area Characterization phase of the Department of Energy's National Waste Terminal Storage program in salt. The characterization of Gulf Coast Salt Domes as a potential site for storage of nuclear waste is an ongoing process. This report summarizes investigations covering an area of approximately 2590 km/sup 2/ (1000 mi/sup 2/). Data on Oakwood, Keechi, and Palestine Domes are given. Subsequent phases of the program will focus on smaller land areas and fewer specific salt domes, with progressively more detailed investigations, possibly culminating with a licensemore » application to the Nuclear Regulatory Commission. The data in this report are a result of drilling and sampling, geophysical and geologic field work, and intensive literature review. The ACR contains text discussing data usage, interpretations, results and conclusions based on available geologic and hydrologic data, and figures including diagrams showing data point locations, geologic and hydrologic maps, geologic cross sections, and other geologic and hydrologic information. An appendix contains raw data gathered during this phase of the project and used in the preparation of these reports.« less

A Corner-Point-Grid-Based Voxelization Method for Complex Geological Structure Model with Folds

NASA Astrophysics Data System (ADS)

Chen, Qiyu; Mariethoz, Gregoire; Liu, Gang

2017-04-01

3D voxelization is the foundation of geological property modeling, and is also an effective approach to realize the 3D visualization of the heterogeneous attributes in geological structures. The corner-point grid is a representative data model among all voxel models, and is a structured grid type that is widely applied at present. When carrying out subdivision for complex geological structure model with folds, we should fully consider its structural morphology and bedding features to make the generated voxels keep its original morphology. And on the basis of which, they can depict the detailed bedding features and the spatial heterogeneity of the internal attributes. In order to solve the shortage of the existing technologies, this work puts forward a corner-point-grid-based voxelization method for complex geological structure model with folds. We have realized the fast conversion from the 3D geological structure model to the fine voxel model according to the rule of isocline in Ramsay's fold classification. In addition, the voxel model conforms to the spatial features of folds, pinch-out and other complex geological structures, and the voxels of the laminas inside a fold accords with the result of geological sedimentation and tectonic movement. This will provide a carrier and model foundation for the subsequent attribute assignment as well as the quantitative analysis and evaluation based on the spatial voxels. Ultimately, we use examples and the contrastive analysis between the examples and the Ramsay's description of isoclines to discuss the effectiveness and advantages of the method proposed in this work when dealing with the voxelization of 3D geologic structural model with folds based on corner-point grids.

Decoding a Geological Message

NASA Image and Video Library

2017-06-14

A close-up image from NASA's Mars Reconnaissance Orbiter of a recent 150-meter diameter impact crater near Amazonis Mensa and Medusae Fossae is another great example of geologic complexity of Mars. The spider web-like texture of this crater is intriguing. But what does it mean? On Earth, we have many geologic mechanisms that embrace the surface of the planet in an almost constant state of metamorphosis. Although Mars is not nearly as geologically active as Earth, it is still a host to many processes that shape its surface even today (e.g., aeolian modification, periglacial processes, recent impacts, etc.). The appearance of the ejecta of this crater is likely a combination of both the characteristics of the target material it was deposited on, and processes that modified and degraded it over time. When we look to other images in this region we find a similar texture. This texture is referred to as “yardangs” by scientists who study wind erosion. Yardangs are streamlined ridge-and-trough patterns formed by the erosion of wind dominating from a specific direction; in this particular case, from the southeast to the northwest. The specific direction of the winds is supported by regional context images that show many craters in the region have wind streak "tails" that points to the northwest. Craters of this size have been observed to form recently on Mars, so the fact that this crater is modified speaks volumes, and gives us a chance to decode some geological messages from Mars. https://photojournal.jpl.nasa.gov/catalog/PIA21759

View of Feature 2, the remains of the Geology/Change Room, ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

View of Feature 2, the remains of the Geology/Change Room, view to the southeast - Orphan Lode Mine, North of West Rim Road between Powell Point and Maricopa Point, South Rim, Grand Canyon Village, Coconino County, AZ

The 3D geological model of the 1963 Vajont rockslide, reconstructed with implicit surface methods

NASA Astrophysics Data System (ADS)

Bistacchi, Andrea; Massironi, Matteo; Francese, Roberto; Giorgi, Massimo; Taller, Claudio

2015-04-01

The Vajont rockslide has been the object of several studies because of its catastrophic consequences and of its particular evolution. Several qualitative or quantitative models have been presented in the last 50 years, but a complete explanation of all the relevant geological and mechanical processes remains elusive. In order to better understand the mechanics and dynamics of the 1963 event, we have reconstructed the first 3D geological model of the rockslide, which allowed us to accurately investigate the rockslide structure and kinematics. The input data for the model consisted in: pre- and post-rockslide geological maps, pre- and post-rockslide orthophotos, pre- and post-rockslide digital elevation models, structural data, boreholes, and geophysical data (2D and 3D seismics and resistivity). All these data have been integrated in a 3D geological model implemented in Gocad®, using the implicit surface modelling method. Results of the 3D geological model include the depth and geometry of the sliding surface, the volume of the two lobes of the rockslide accumulation, kinematics of the rockslide in terms of the vector field of finite displacement, and high quality meshes useful for mechanical and hydrogeological simulations. The latter can include information about the stratigraphy and internal structure of the rock masses and allow tracing the displacement of different material points in the rockslide from the pre-1963-failure to the post-rockslide state. As a general geological conclusion, we may say that the 3D model allowed us to recognize very effectively a sliding surface, whose non-planar geometry is affected by the interference pattern of two regional-scale fold systems. The rockslide is partitioned into two distinct and internally continuous rock masses with a distinct kinematics, which were characterised by a very limited internal deformation during the slide. The continuity of these two large blocks points to a very localized deformation, occurring along a thin, continuous and weak cataclastic horizon. Finally, the chosen modelling strategy, based on both traditional "explicit" and implicit techniques, was found to be very effective for reconstructing complex folded and faulted geological structures, and could be applied also to other geological environments.

A multiple-point geostatistical method for characterizing uncertainty of subsurface alluvial units and its effects on flow and transport

USGS Publications Warehouse

Cronkite-Ratcliff, C.; Phelps, G.A.; Boucher, A.

2012-01-01

This report provides a proof-of-concept to demonstrate the potential application of multiple-point geostatistics for characterizing geologic heterogeneity and its effect on flow and transport simulation. The study presented in this report is the result of collaboration between the U.S. Geological Survey (USGS) and Stanford University. This collaboration focused on improving the characterization of alluvial deposits by incorporating prior knowledge of geologic structure and estimating the uncertainty of the modeled geologic units. In this study, geologic heterogeneity of alluvial units is characterized as a set of stochastic realizations, and uncertainty is indicated by variability in the results of flow and transport simulations for this set of realizations. This approach is tested on a hypothetical geologic scenario developed using data from the alluvial deposits in Yucca Flat, Nevada. Yucca Flat was chosen as a data source for this test case because it includes both complex geologic and hydrologic characteristics and also contains a substantial amount of both surface and subsurface geologic data. Multiple-point geostatistics is used to model geologic heterogeneity in the subsurface. A three-dimensional (3D) model of spatial variability is developed by integrating alluvial units mapped at the surface with vertical drill-hole data. The SNESIM (Single Normal Equation Simulation) algorithm is used to represent geologic heterogeneity stochastically by generating 20 realizations, each of which represents an equally probable geologic scenario. A 3D numerical model is used to simulate groundwater flow and contaminant transport for each realization, producing a distribution of flow and transport responses to the geologic heterogeneity. From this distribution of flow and transport responses, the frequency of exceeding a given contaminant concentration threshold can be used as an indicator of uncertainty about the location of the contaminant plume boundary.

Hydrogeologic framework and hydrologic conditions of the Piney Point aquifer in Virginia

USGS Publications Warehouse

McFarland, E. Randolph

2017-06-07

The Piney Point aquifer in Virginia is newly described and delineated as being composed of six geologic units, in a study conducted by the U.S. Geological Survey in cooperation with the Virginia Department of Environmental Quality (VA DEQ). The eastward-dipping geologic units include, in stratigraphically ascending order, thesand of the Nanjemoy Formation Woodstock Member,interbedded limestone and sand of the Piney Point Formation,silty and clayey sand of the Gosport Formation equivalent sediments,silty sand of the Oligocene-age sediments,silty fine-grained sand of the Old Church Formation, andsilty sand of the Calvert Formation, Newport News unit and basal Plum Point Member.Identification of geologic units is based on typical sediment lithologies of geologic formations. Fine-grained sediments that compose confining units positioned immediately above and below the Piney Point aquifer are also described.The Piney Point aquifer is one of several confined aquifers within the Virginia Coastal Plain and includes a highly porous and solution-channeled indurated limestone within the Piney Point Formation from which withdrawals are made. The limestone is relatively continuous laterally across central parts of the Northern Neck, Middle Peninsula, and York-James Peninsula. Other geologic units are of variable extent. The configurations of most of the geologic units are further affected by newly identified faults that are aligned radially from the Chesapeake Bay impact crater and create constrictions or barriers to groundwater flow. Some geologic units are also truncated beneath the lower Rappahannock River by a resurge channel associated with the impact crater.Groundwater withdrawals from the Piney Point aquifer increased from approximately 1 million gallons per day (Mgal/d) during 1900 to 7.35 Mgal/d during 2004. As a result, a water-level cone of depression in James City and northern York Counties was estimated to be as low as 70 feet (ft) below the National Geodetic Vertical Datum of 1929 (NGVD 29) by 2005. Withdrawals decreased to 5.01 Mgal/d by 2009 as withdrawals were shifted toward other sources, and by 2015 water levels had recovered to approximately 50 ft below NGVD 29.The mean estimated transmissivity of the Piney Point aquifer in York and James City Counties is 16,300 feet squared per day (ft2/d), but farther north it is only 925 ft2/d. The mean well specific capacity in York and James City Counties is 11.4 gallons per minute per foot (gal/min/ft). Farther north in Virginia, mean specific capacity is only 2.26 gal/min/ft, and in Maryland it is 0.99 gal/min/ft. The northward decrease in specific capacity probably reflects the northward decrease in transmissivity, which results from poor development of the solution-channeled limestone.An aquifer test in northern York County induced vertical leakage to the solution-channeled limestone from overlying silty sand and a change in response of the aquifer to pumping from a single layer to two layers. Transmissivity of the limestone of approximately 19,800 ft2/d was distinguished from the silty sand of approximately 2,500 ft2/d.Most of the water in the Piney Point aquifer is slightly alkaline with moderate concentrations primarily of sodium and bicarbonate that are slightly undersaturated with respect to calcite. Iron concentrations are generally less than 0.3 milligrams per liter (mg/L). Mixing of freshwater with seawater has elevated chloride concentrations to the southeast to as much as 7,120 mg/L.Information on the Piney Point aquifer can benefit water-resource management in siting production wells, predicting likely well yield, and anticipating water-level response to withdrawals. Models that vertically discretize individual geologic units can potentially be used to evaluate groundwater flow in greater detail by representing lateral flow and vertical leakage among the geologic units.Because groundwater withdrawals are made primarily from the limestone and sand of the Piney Point Formation, the VA DEQ has considered regarding the limestone and sand singly as a regulated aquifer apart from the other geologic units. Under current policy in Virginia, if only the limestone and sand were regarded as a regulated aquifer, a greater amount of drawdown would be allowed than is allowed for the Piney Point aquifer consisting of six geologic units. Some production wells intercept multiple geologic units, and the units can undergo water-level decline and vertical leakage induced by pumping from the limestone and sand. Whether the other geologic units are to be regarded as regulated aquifers is an additional consideration for the VA DEQ.

Archive of Sediment Data Collected from Sandy Point to Belle Pass, Louisiana, 1983 through 2000 (Vibracore Surveys: 00SCC, CR83, P86, and USACE Borehole Cores)

USGS Publications Warehouse

Dreher, Chandra A.; Flocks, James G.; Ferina, Nick F.; Kulp, Mark A.

2008-01-01

This CD-ROM publication was prepared by an agency of the U.S. Government. Although these data have been processed successfully on a computer system at the U.S. Geological Survey, no warranty expressed or implied is made regarding the display or utility of data on any other system, or for general or scientific purposes, nor shall the act of distribution imply any such warranty. The U.S. Geological Survey shall not be held liable for improper or incorrect use of the data described and (or) contained herein. Reference herein to any specific commercial product, process, or service by trade name, trademark, manufacturer, or otherwise does not constitute or imply its endorsement, recommendation, or favoring by the U.S. Government nor any agency thereof.

Do the Twist: How a Multimedia Table Could Transform Education

ERIC Educational Resources Information Center

Simkins, Michael

2005-01-01

A group of students is gathered around a square table, on each side of which sit four small maps. In the center is a much larger map. The students are engaged in an animated discussion of key topographical features they are observing and the geological processes that may have produced them. Much pointing and tapping on the table punctuates the…

The roles of humans and robots as field geologists on the Moon

NASA Technical Reports Server (NTRS)

Spudis, Paul D.; Taylor, G. Jeffrey

1992-01-01

The geologic exploration of the Moon will be one of the primary scientific functions of any lunar base program. Geologic reconnaissance, the broad-scale characterization of processes and regions, is an ongoing effort that has already started and will continue after base establishment. Such reconnaissance is best done by remote sensing from lunar orbit and simple, automated, sample return missions of the Soviet Luna class. Field study, in contrast, requires intensive work capabilities and the guiding influence of human intelligence. We suggest that the most effective way to accomplish the goals of geologic field study on the Moon is through the use of teleoperated robots, under the direct control of a human geologists who remains at the lunar base, or possibly on Earth. These robots would have a global traverse range, could possess sensory abilities optimized for geologic field work, and would accomplish surface exploration goals without the safety and life support concerns attendance with the use of human geologists on the Moon. By developing the capability to explore any point on the Moon immediately after base establishment, the use of such teleoperated, robotic field geologists makes the single-site lunar base into a 'global' base from the viewpoint of geologic exploration.

The Laboratory Study of Shear Strength of the Overconsolidated and Quasi - Overconsolidated Fine - Grained Soil

NASA Astrophysics Data System (ADS)

Strozyk, Joanna

2017-12-01

The paper presents results of laboratory shear strength test conducted on fine-grained soil samples with different grain size distribution and with different geological age and stress history. The Triaxial Isotopic Consolidation Undrained Tests (TXCIU) were performed under different consolidation stress in normal and overconsolidadion stress state on the samples with natural structure. Soil samples were selected from soil series of different age and geological origins: overconsolidated sensu stricto Miopliocene silty clay (siCl) and quasi overconsolidated Pleistocene clayey silt (clSi). Paper pointed out that overconsolidated sensu stricto and quasi overconsolidated fine-grained soil in same stress and environmental condition could show almost similar behaviour, and in other condition could behave significantly different. The correct evaluation of geotechnical parameters, the possibility of predicting their time-correct ability is only possible with appropriately recognized geological past and past processes that accompanied the soil formation.

Evaluation of tunnel seismic prediction (TSP) result using the Japanese highway rock mass classification system for Pahang-Selangor Raw Water Transfer Tunnel

NASA Astrophysics Data System (ADS)

Von, W. C.; Ismail, M. A. M.

2017-10-01

The knowing of geological profile ahead of tunnel face is significant to minimize the risk in tunnel excavation work and cost control in preventative measure. Due to mountainous area, site investigation with vertical boring is not recommended to obtain the geological profile for Pahang-Selangor Raw Water Transfer project. Hence, tunnel seismic prediction (TSP) method is adopted to predict the geological profile ahead of tunnel face. In order to evaluate the TSP results, IBM SPSS Statistic 22 is used to run artificial neural network (ANN) analysis to back calculate the predicted Rock Grade Points (JH) from actual Rock Grade Points (JH) using Vp, Vs and Vp/Vs from TSP. The results show good correlation between predicted Rock Grade points and actual Rock Grade Points (JH). In other words, TSP can provide geological profile prediction ahead of tunnel face significantly while allowing continuously TBM excavation works. Identifying weak zones or faults ahead of tunnel face is crucial for preventative measures to be carried out in advance for a safer tunnel excavation works.

An interpretation model of GPR point data in tunnel geological prediction

NASA Astrophysics Data System (ADS)

He, Yu-yao; Li, Bao-qi; Guo, Yuan-shu; Wang, Teng-na; Zhu, Ya

2017-02-01

GPR (Ground Penetrating Radar) point data plays an absolutely necessary role in the tunnel geological prediction. However, the research work on the GPR point data is very little and the results does not meet the actual requirements of the project. In this paper, a GPR point data interpretation model which is based on WD (Wigner distribution) and deep CNN (convolutional neural network) is proposed. Firstly, the GPR point data is transformed by WD to get the map of time-frequency joint distribution; Secondly, the joint distribution maps are classified by deep CNN. The approximate location of geological target is determined by observing the time frequency map in parallel; Finally, the GPR point data is interpreted according to the classification results and position information from the map. The simulation results show that classification accuracy of the test dataset (include 1200 GPR point data) is 91.83% at the 200 iteration. Our model has the advantages of high accuracy and fast training speed, and can provide a scientific basis for the development of tunnel construction and excavation plan.

Quaternary geologic map of the Wolf Point 1° × 2° quadrangle, Montana and North Dakota

USGS Publications Warehouse

Fullerton, David S.; Colton, Roger B.; Bush, Charles A.

2016-09-08

The Wolf Point quadrangle encompasses approximately 16,084 km2 (6,210 mi2). The northern boundary is the Montana/Saskatchewan (U.S.-Canada) boundary. The quadrangle is in the Northern Plains physiographic province and it includes the Peerless Plateau and Flaxville Plain. The primary river is the Missouri River.The map units are surficial deposits and materials, not landforms. Deposits that comprise some constructional landforms (for example, ground-moraine deposits, end-moraine deposits, and stagnation-moraine deposits, all composed of till) are distinguished for purposes of reconstruction of glacial history. Surficial deposits and materials are assigned to 23 map units on the basis of genesis, age, lithology or composition, texture or particle size, and other physical, chemical, and engineering characteristics. It is not a map of soils that are recognized in pedology or agronomy.  Rather, it is a generalized map of soils recognized in engineering geology, or of substrata or parent materials in which pedologic or agronomic soils are formed.  Glaciotectonic (ice-thrust) structures and deposits are mapped separately, represented by a symbol. The surficial deposits are glacial, ice-contact, glaciofluvial, alluvial, lacustrine, eolian, colluvial, and mass-movement deposits.Till of late Wisconsin age is represented by three map units. Till of Illinoian age also is mapped.  Till deposited during pre-Illinoian glaciations is not mapped, but is widespread in the subsurface.  Linear ice-molded landforms (primarily drumlins), shown by symbol, indicate directions of ice flow during late Wisconsin and Illinoian glaciations. The Quaternary geologic map of the Wolf Point quadrangle, northeastern Montana and North Dakota, was prepared to provide a database for compilation of a Quaternary geologic map of the Regina 4° × 6° quadrangle, United States and Canada, at scale 1:1,000,000, for the U.S. Geological Survey Quaternary Geologic Atlas of the United States map series.  This map was compiled from data from many sources, at several different map scales.  That information was generalized and simplified, and then transferred to a base map at 1:250,000 scale to serve as the base for final reduction to 1:1,000,000, the nominal reading scale of maps in the Quaternary Geologic Atlas of the United States map series.  This map is the generalized and simplified 1:250,000 scale compilation.  Letter symbols for the map units are those used for the same units in the Quaternary Geologic Atlas of the United States map series. The map summarizes new, and selected published and unpublished, geologic information for public use and for use by Federal, State, and local governmental agencies for land use planning, including assessment of natural resources, natural hazards, recreation potential, and land use management.  It also is a base from which a variety of maps relating to earth surface processes and Quaternary geologic history can be derived.

ERTS-1 data applied to strip mining

NASA Technical Reports Server (NTRS)

Anderson, A. T.; Schubert, J.

1976-01-01

Two coal basins within the western region of the Potomac River Basin contain the largest strip-mining operations in western Maryland and West Virginia. The disturbed strip-mine areas were delineated along with the surrounding geological and vegetation features by using ERTS-1 data in both analog and digital form. The two digital systems employed were (1) the ERTS analysis system, a point-by-point digital analysis of spectral signatures based on known spectral values and (2) the LARS automatic data processing system. These two systems aided in efforts to determine the extent and state of strip mining in this region. Aircraft data, ground-verification information, and geological field studies also aided in the application of ERTS-1 imagery to perform an integrated analysis that assessed the adverse effects of strip mining. The results indicated that ERTS can both monitor and map the extent of strip mining to determine immediately the acreage affected and to indicate where future reclamation and revegetation may be necessary.

A new method for mapping multidimensional data to lower dimensions

NASA Technical Reports Server (NTRS)

Gowda, K. C.

1983-01-01

A multispectral mapping method is proposed which is based on the new concept of BEND (Bidimensional Effective Normalised Difference). The method, which involves taking one sample point at a time and finding the interrelationships between its features, is found very economical from the point of view of storage and processing time. It has good dimensionality reduction and clustering properties, and is highly suitable for computer analysis of large amounts of data. The transformed values obtained by this procedure are suitable for either a planar 2-space mapping of geological sample points or for making grayscale and color images of geo-terrains. A few examples are given to justify the efficacy of the proposed procedure.

Harmonisation of geological data to support geohazard mapping: the case of eENVplus project

NASA Astrophysics Data System (ADS)

Cipolloni, Carlo; Krivic, Matija; Novak, Matevž; Pantaloni, Marco; Šinigoj, Jasna

2014-05-01

In the eENVplus project, which aims is to unlock huge amounts of environmental datamanaged by the national and regional environmental agencies and other public and private organisations, we have developed a cross-border pilot on the geological data harmonisation through the integration and harmonisation of existing services. The pilot analyses the methodology and results of the OneGeology-Europe project, elaborated at the scale of 1:1M, to point out difficulties and unsolved problems highlighted during the project. This preliminary analysis is followed by a comparison of two geological maps provided by the neighbouring countries with the objective to compare and define the geometric and semantic anomalous contacts between geological polygons and lines in the maps. This phase will be followed by a detailed scale geological map analysis aimed to solve the anomalies identified in the previous phase. The two Geological Surveys involved into the pilot will discuss the problems highlighted during this phase. Subsequently the semantic description will be redefined and the geometry of the polygons in geological maps will be redrawn or adjusted according to a lithostratigraphic approach that takes in account the homogeneity of age, lithology, depositional environment and consolidation degree of geological units. The two Geological Surveys have decided to apply the harmonisation process on two different dataset: the first is represented by the Geological Map at the scale of 1:1,000,000, partially harmonised within the OneGeology-Europe project that will be re-aligned with GE INSPIRE data model to produce data and services compliant with INSPIRE target schema. The main target of Geological Surveys is to produce data and web services compliant with the wider international schema, where there are more options to provide data, with specific attributes that are important to obtain the geohazard map as in the case of this pilot project; therefore we have decided to apply GeoSciML 3.2 schema to the dataset that represents Geological Map at the scale of 1:100,000. Within the pilot will be realised two main geohazard examples with a semi-automatized procedure based on a specific tool component integrated in the client: a landslide susceptibility map and a potential flooding map. In this work we want to present the first results obtained with use case geo-processing procedure in the first test phase, where we have developed a dataset compliant with GE INSPIRE to perform the landslide and flooding susceptibility maps.

Use of terrestrial laser scanning for the documentation of quaternary caves

NASA Astrophysics Data System (ADS)

Tyszkowski, Sebastian; Kramkowski, Mateusz; Wiśniewska, Daria; Urban, Jan

2016-04-01

Due to the nature of their occurrence and genesis, caves in the Polish Lowlands represent a peculiarity of geological heritage, unique on the European scale. They are developed in Quaternary deposits, mostly at the contact of slabs or irregular bodies of cemented glacial or glaciofluvial deposits: conglomerates and sandstones, with unconsolidated deposits, mostly sands, gravels and clays. So far, 20 such caves have been recorded in Polish Lowlands. Most caves are only several meters long, the largest one is over 60 m long. Regardless of their origins, the character of host rocks is the reason that processes leading to their formation are simultaneously the destroying processes. Thus, the studied caves, as well as other caves of this region, are unstable, gradually evolving objects. The changes taking place in them are continuous and intense enough, therefore the documentation of their shape with the greatest possible accuracy and resolution becomes crucial. Such possibility can provide the technique of laser scanning. In 2014 three caves, including one recently discovered, were scanned using the TLS. Measurements of caves and their surroundings were conducted in May and July 2014 with a scanner RIEGL VZ-4000. Point clouds from several scanner positions were combined using the module Multi Station Adjustment in the RiSCAN software. This module allows to connect point clouds from successive positions without any objects of reference. After the merger of point clouds from individual positions and their filtration, a collection of several million points was obtained. The number of points projected on the wall was over 20 000 per m2. The using of TLS enabled to present the morphometric features impossible to obtain using traditional methods. High density of the point clouds allows registering even small details on the cave walls, as well as monitoring leaching, falling, grinding and flaking processes taking place in them. Thus, the most important advantage of the TLS is the "visual protection" of these objects unstable in geological time-scale. This study is a contribution to the Virtual Institute of Integrated Climate and Landscape Evolution Analyses - ICLEA- of the Helmholtz Association, Grant No VH-VI-415

Application of Laser Scanning for Creating Geological Documentation

NASA Astrophysics Data System (ADS)

Buczek, Michał; Paszek, Martyna; Szafarczyk, Anna

2018-03-01

A geological documentation is based on the analyses obtained from boreholes, geological exposures, and geophysical methods. It consists of text and graphic documents, containing drilling sections, vertical crosssections through the deposit and various types of maps. The surveying methods (such as LIDAR) can be applied in measurements of exposed rock layers, presented in appendices to the geological documentation. The laser scanning allows obtaining a complete profile of exposed surfaces in a short time and with a millimeter accuracy. The possibility of verifying the existing geological cross-section with laser scanning was tested on the example of the AGH experimental mine. The test field is built of different lithological rocks. Scans were taken from a single station, under favorable measuring conditions. The analysis of the signal intensity allowed to divide point cloud into separate geological layers. The results were compared with the geological profiles of the measured object. The same approach was applied to the data from the Vietnamese hard coal open pit mine Coc Sau. The thickness of exposed coal bed deposits and gangue layers were determined from the obtained data (point cloud) in combination with the photographs. The results were compared with the geological cross-section.

Geologic, geophysical, and in situ stress investigations in the vicinity of the Dining Car Chimney, Dining Car/Hybla gold tunnels, Nevada Test Site, with sections on geologica investigations, geophysical investigations, and in situ stress investigations

USGS Publications Warehouse

Townsend, D.R.; Baldwin, M.J.; Carroll, R.D.; Ellis, W.L.; Magner, J.E.

1982-01-01

The Hybla Gold experiment was conducted in the U12e.20 drifts of the E-tunnel complex beneath the surface of Rainier Mesa at the Nevada Test Site. Though the proximity of the Hybla Gold working point to the chimney of the Dining Car event was important to the experiment, the observable geologic effects from Dining Car on the Hybla Gold site were minor. Overburden above the working point is approximately 385 m (1,263 ft). The pre-Tertiary surface, probably quartzite, lies approximately 254 m (833 ft) below the working point. The drifts are mined in zeolitized ash-fall tuffs of tunnel bed 4, subunits K and J, all of Miocene age. The working point is in subunit 4J. Geologic structure in the region around the working point is not complex. The U12e.20 main drift follows the axis of a shallow depositional syncline. A northeast-dipping fault with displacement of approximately 3 m (10 ft) passes within 15.2 m (50 ft) of the Hybla Gold working point. Three faults of smaller displacement pass within 183-290 m (600-950 ft) of the working point, and are antithetic to the 3-m (10-ft) fault. Three exploratory holes were drilled to investigate the chimney of the nearby Dining Car event. Four horizontal holes were drilled during the construction of the U12e.20 drifts to investigate the geology of the Hybla Gold working point.

Geologic cross sections showing the concentrations of As, Cd, Co, Cu, Cr, Fe, Mo, Ni, Pb, and Zn in acid-insoluble residues of Paleozoic rocks within the Doniphan/Eleven Point Ranger District of the Mark Twain National Forest, Missouri, USA

USGS Publications Warehouse

Lee, Lopaka; Goldhaber, Martin B.

2002-01-01

This report is a product of a U.S. Geological Survey investigation that is focused on characterizing the potential environmental impacts of lead-zinc mining within the Doniphan/Eleven Point ranger district of the Mark Twain national forest. The elemental concentrations of iron (Fe), arsenic (As), cadmium (Cd), cobalt (Co), copper (Cu), chromium (Cr), nickel (Ni), lead (Pb), and zinc (Zn) in acidinsoluble residues are shown for boreholes along two geologic cross sections within Doniphan/Elevan Point ranger district (Figure 1). The purpose of this report is to characterize, in a general sense, the distribution of economically and environmentally important elements within the rocks and aquifers of the Doniphan/Eleven Point ranger district

Enhancement of a Virtual Geology Field Guide of Georgia Initiative Using Gigapan© and ArcGIS Online's Story Map

NASA Astrophysics Data System (ADS)

Mobasher, K.; Turk, H. J.; Witherspoon, W.; Tate, L.; Hoynes, J.

2015-12-01

A GIS geology geodatabase of Georgia was developed using ArcGIS 10.2. The geodatabase for each physiographic provinces of Georgia contains fields designed to store information regarding geologic features. Using ArcGIS online, the virtual field guide is created which provides an interactive learning experience for students to allow in real time photography, description, mapping and sharing their observations with the instructor and peers. Gigapan© facilitates visualizing geologic features at different scales with high resolutions and in their larger surrounding context. The classroom applications of the Gigapan© are limitless when teaching students the entire range of geologic structures from showcasing crystalline structures of minerals to understanding the geological processes responsible for formation of an entire mountain range. The addition of the Story Map enhances the virtual experience when you want to present a geo-located story point narrative featuring images or videos. The virtual field component and supplementary Gigapan© imagery coupled with Story Map added significantly to the detailed realism of virtual field guide further allowing students to more fully understand geological concepts at various scales. These technologies peaked students interest and facilitated their learning and preparation to function more effectively in the geosciences by developing better observations and new skills. These technologies facilitated increased student engagement in the geosciences by sharing, enhancing and transferring lecture information to actual field knowledge and experiences. This enhanced interactive learning experience not only begins to allow students to understand and recognize geologic features in the field but also increased their collaboration, enthusiasm and interest in the discipline. The increased interest and collaboration occurred as students assisted in populating a geologic geodatabase of Georgia.

Mapping watershed potential to contribute phosphorus from geologic materials to receiving streams, southeastern United States

USGS Publications Warehouse

Terziotti, Silvia; Hoos, Anne B.; Harned, Douglas; Garcia, Ana Maria

2010-01-01

As part of the southeastern United States SPARROW (SPAtially Referenced Regressions On Watershed attributes) water-quality model implementation, the U.S. Geological Survey created a dataset to characterize the contribution of phosphorus to streams from weathering and erosion of surficial geologic materials. SPARROW provides estimates of total nitrogen and phosphorus loads in surface waters from point and nonpoint sources. The characterization of the contribution of phosphorus from geologic materials is important to help separate the effects of natural or background sources of phosphorus from anthropogenic sources of phosphorus, such as municipal wastewater or agricultural practices. The potential of a watershed to contribute phosphorus from naturally occurring geologic materials to streams was characterized by using geochemical data from bed-sediment samples collected from first-order streams in relatively undisturbed watersheds as part of the multiyear U.S. Geological Survey National Geochemical Survey. The spatial pattern of bed-sediment phosphorus concentration is offered as a tool to represent the best available information at the regional scale. One issue may weaken the use of bed-sediment phosphorus concentration as a surrogate for the potential for geologic materials in the watershed to contribute to instream levels of phosphorus-an unknown part of the variability in bed-sediment phosphorus concentration may be due to the rates of net deposition and processing of phosphorus in the streambed rather than to variability in the potential of the watershed's geologic materials to contribute phosphorus to the stream. Two additional datasets were created to represent the potential of a watershed to contribute phosphorus from geologic materials disturbed by mining activities from active mines and inactive mines.

On three-dimensional misorientation spaces.

PubMed

Krakow, Robert; Bennett, Robbie J; Johnstone, Duncan N; Vukmanovic, Zoja; Solano-Alvarez, Wilberth; Lainé, Steven J; Einsle, Joshua F; Midgley, Paul A; Rae, Catherine M F; Hielscher, Ralf

2017-10-01

Determining the local orientation of crystals in engineering and geological materials has become routine with the advent of modern crystallographic mapping techniques. These techniques enable many thousands of orientation measurements to be made, directing attention towards how such orientation data are best studied. Here, we provide a guide to the visualization of misorientation data in three-dimensional vector spaces, reduced by crystal symmetry, to reveal crystallographic orientation relationships. Domains for all point group symmetries are presented and an analysis methodology is developed and applied to identify crystallographic relationships, indicated by clusters in the misorientation space, in examples from materials science and geology. This analysis aids the determination of active deformation mechanisms and evaluation of cluster centres and spread enables more accurate description of transformation processes supporting arguments regarding provenance.

On three-dimensional misorientation spaces

NASA Astrophysics Data System (ADS)

Krakow, Robert; Bennett, Robbie J.; Johnstone, Duncan N.; Vukmanovic, Zoja; Solano-Alvarez, Wilberth; Lainé, Steven J.; Einsle, Joshua F.; Midgley, Paul A.; Rae, Catherine M. F.; Hielscher, Ralf

2017-10-01

Determining the local orientation of crystals in engineering and geological materials has become routine with the advent of modern crystallographic mapping techniques. These techniques enable many thousands of orientation measurements to be made, directing attention towards how such orientation data are best studied. Here, we provide a guide to the visualization of misorientation data in three-dimensional vector spaces, reduced by crystal symmetry, to reveal crystallographic orientation relationships. Domains for all point group symmetries are presented and an analysis methodology is developed and applied to identify crystallographic relationships, indicated by clusters in the misorientation space, in examples from materials science and geology. This analysis aids the determination of active deformation mechanisms and evaluation of cluster centres and spread enables more accurate description of transformation processes supporting arguments regarding provenance.

Recent Geological and Hydrological Activity in Amazonis and Elysium Basins and Their Link, Marte Valles (AME): Prime Target for Future Reconnaissance

NASA Astrophysics Data System (ADS)

Dohm, J. M.; Robbins, S. J.; Hynek, B. M.

2012-03-01

Amazonis and Elysium basins and their link, Marte Vallis (AME), uniquely point to a geologically and hydrologically active Mars. We will present evidence for why AME reconnaissance can help address whether Mars is geologically, hydrologically, and biologically active.

Some aspects of geological information contained in LANDSAT images

NASA Technical Reports Server (NTRS)

Dejesusparada, N. (Principal Investigator); Liu, C. C.; Vitorello, I.; Meneses, P. R.

1980-01-01

The characteristics of MSS images and methods of interpretation are analyzed from a geological point of view. The supportive role of LANDSAT data are illustrated in several examples of surface expressions of geological features, such as synclines and anticlines, spectral characteristics of lithologic units, and circular impact structures.

National Dam Safety Program. Bray Lake Dam (MO 30098), Osage - Gasconade Basin, Phelps County, Missouri. Phase I Inspection Report.

DTIC Science & Technology

1979-12-01

Geologist Applied Engineering & Urban Geology Missouri Geological Survey May 6, 1974 Sheet 6, Appendix B For file Only DEAN LAKE SITE (Formerly Bray...time to point out these problems that you have been discussing. ,J. Hadley Williams Geologist and Chief Applied Engineering & Urban Geology Missouri...Geologist Applied Engineering & Urban Geology Missouri Geological Survey June 27, 1974 Sheet 9, Appendix B FOR FILE ONLY L • BRAYS LAKE RECONNAISSANCE PHELPS

Steps in creating a methodology for interpreting a geodiversity element -integrating a geodiversity element in the popular knowledge

NASA Astrophysics Data System (ADS)

Toma, Cristina; Andrasanu, Alexandru

2017-04-01

Conserving geodiversity and especially geological heritage is not very well integrated in the general knowledge as biodiversity is, for example. Keeping that in mind we are trying, through this research, to find a better way of transmitting a geological process to the general public. The means to integrate a geodiversity element in the popular knowledge is through interpretation. Interpretation "translates" the scientific information into a common language with very well known facts by the general public. The purpose of this paper is creating a framework for a methodology necessary in interpreting a geodiversity element - salt - in Buzau Land Geopark. We will approach the salt subject through a scheme in order to have a general view of the process and to better understand and explain it to the general public. We will look into the subject from three scientific points of view: GEODIVERSITY, ANTHROPOLOGY, and the SOCIO-ECONOMICAL aspect. Each of these points of view or domains will be divided into themes. For GEODIVERSITY we will have the following themes: Formation, Accumulation, Diapirism process, Chemical formula, Landscape (here we will include also the specific biodiversity with the halophile plants), Landforms, Hazard. For ANTHROPOLOGY will contain themes of tangible and intangible heritage like: Salt symbolistic, Stories and ritual usage, Recipes, How the knowledge is transmitted. The SOCIO-ECONOMIC aspect will be reflected through themes like: Extractive methods, Usage, Interdictions, Taxes, Commercial exchanges. Each theme will have a set of keywords that will be described and each one will be at the base of the elements that together will form the interpretation of the geodiversity element - the salt. The next step will be to clearly set the scope of the interpretation, to which field of expertise is our interpretation process addressed: Education (Undergraduate or post-graduate Students), Science, Geotourism, Entrepreneurship. After putting together the elements derived from the key words, and establishing the purpose of the interpretation, the following step will be finding the message to be sent through interpretation. The last step of the framework will be finding the proper means to transmit the interpretive message: panels, installations, geo-routes, visitors centers, landart, virtual/augmented reality. This framework would represent a methodology to be followed when interpreting scientific knowledge about a geological process. Thus, this approach - the geodiversity reflected through the anthropological and socio-economic aspects- would be a successful method for showing the general public how a geological element influenced their lives, drawing them closer to Earth Sciences.

Mid-Atlantic multichannel seismic-reflection profiles 14, 15, 16, and 17

USGS Publications Warehouse

Schlee, John Stevens

1980-01-01

The U. S. Geological Survey (USGS) is making available four multi­channel profiles collected by Teledyne Exploration in 1977 by means of a 48-channel streamer (3600 m long) and four airguns (2160 in). Profiles 15 and 16 were processed by.Teledyne Exploration and profiles 14 and 17 were processed on the Phoenix "I"* computer·by the USGS. The processing included standard demultiplexing, deconvolution before and aftfer stack, Common Depth Point (CDP) gathers, velocity analyses every 3 km, move-out correction, stacking, time-variant, filtering, and time-variant scaling.The released lines are over the outer edge of the Continental Shelf in the northern part of the Baltimore Canyon trough (Line 14: 140 km long and Line 15: 157 km long), over the Long Island platform. (Line 16: 313 km long), and over the Carolina platform (Line 17: 186 km long). These profiles were collected as a part of a regional grid over offshore Atlantic sedimentary basins in a continuing program to assess the resource potential by means of nonproprietary data.These profiles, plus the velocity scans and shotpoint maps, may be viewed at U. S. Geological Survey, Quissett Campus, Woods Hole, MA. 02543, and U. S. Geological Survey, Bldg. 25, Denver Federal Center, Denver, CO. Copies of maps, scans, and profiles can be purchased only from the National Geophysical Solar-Terrestrial Data Center, Environmental Data Service (NOM), Code D 621, Boulder, CO 80302.

Improving the geological interpretation of magnetic and gravity satellite anomalies

NASA Technical Reports Server (NTRS)

Hinze, William J.; Braile, Lawrence W.; Vonfrese, Ralph R. B.

1987-01-01

Quantitative analysis of the geologic component of observed satellite magnetic and gravity fields requires accurate isolation of the geologic component of the observations, theoretically sound and viable inversion techniques, and integration of collateral, constraining geologic and geophysical data. A number of significant contributions were made which make quantitative analysis more accurate. These include procedures for: screening and processing orbital data for lithospheric signals based on signal repeatability and wavelength analysis; producing accurate gridded anomaly values at constant elevations from the orbital data by three-dimensional least squares collocation; increasing the stability of equivalent point source inversion and criteria for the selection of the optimum damping parameter; enhancing inversion techniques through an iterative procedure based on the superposition theorem of potential fields; and modeling efficiently regional-scale lithospheric sources of satellite magnetic anomalies. In addition, these techniques were utilized to investigate regional anomaly sources of North and South America and India and to provide constraints to continental reconstruction. Since the inception of this research study, eleven papers were presented with associated published abstracts, three theses were completed, four papers were published or accepted for publication, and an additional manuscript was submitted for publication.

Geology and photometric variation of solar system bodies with minor atmospheres: implications for solid exoplanets.

PubMed

Fujii, Yuka; Kimura, Jun; Dohm, James; Ohtake, Makiko

2014-09-01

A reasonable basis for future astronomical investigations of exoplanets lies in our best knowledge of the planets and satellites in the Solar System. Solar System bodies exhibit a wide variety of surface environments, even including potential habitable conditions beyond Earth, and it is essential to know how they can be characterized from outside the Solar System. In this study, we provide an overview of geological features of major Solar System solid bodies with minor atmospheres (i.e., the terrestrial Moon, Mercury, the Galilean moons, and Mars) that affect surface albedo at local to global scale, and we survey how they influence point-source photometry in the UV/visible/near IR (i.e., the reflection-dominant range). We simulate them based on recent mapping products and also compile observed light curves where available. We show a 5-50% peak-to-trough variation amplitude in one spin rotation associated with various geological processes including heterogeneous surface compositions due to igneous activities, interaction with surrounding energetic particles, and distribution of grained materials. Some indications of these processes are provided by the amplitude and wavelength dependence of variation in combinations of the time-averaged spectra. We also estimate the photometric precision needed to detect their spin rotation rates through periodogram analysis. Our survey illustrates realistic possibilities for inferring the detailed properties of solid exoplanets with future direct imaging observations. Key Words: Planetary environments-Planetary geology-Solar System-Extrasolar terrestrial planets.

Comparison of 3D point clouds obtained by photogrammetric UAVs and TLS to determine the attitude of dolerite outcrops discontinuities.

NASA Astrophysics Data System (ADS)

Duarte, João; Gonçalves, Gil; Duarte, Diogo; Figueiredo, Fernando; Mira, Maria

2015-04-01

Photogrammetric Unmanned Aerial Vehicles (UAVs) and Terrestrial Laser Scanners (TLS) are two emerging technologies that allows the production of dense 3D point clouds of the sensed topographic surfaces. Although image-based stereo-photogrammetric point clouds could not, in general, compete on geometric quality over TLS point clouds, fully automated mapping solutions based on ultra-light UAVs (or drones) have recently become commercially available at very reasonable accuracy and cost for engineering and geological applications. The purpose of this paper is to compare the two point clouds generated by these two technologies, in order to automatize the manual process tasks commonly used to detect and represent the attitude of discontinuities (Stereographic projection: Schmidt net - Equal area). To avoid the difficulties of access and guarantee the data survey security conditions, this fundamental step in all geological/geotechnical studies, applied to the extractive industry and engineering works, has to be replaced by a more expeditious and reliable methodology. This methodology will allow, in a more actuated clear way, give answers to the needs of evaluation of rock masses, by mapping the structures present, which will reduce considerably the associated risks (investment, structures dimensioning, security, etc.). A case study of a dolerite outcrop locate in the center of Portugal (the dolerite outcrop is situated in the volcanic complex of Serra de Todo-o-Mundo, Casais Gaiola, intruded in Jurassic sandstones) will be used to assess this methodology. The results obtained show that the 3D point cloud produced by the Photogrammetric UAV platform has the appropriate geometric quality for extracting the parameters that define the discontinuities of the dolerite outcrops. Although, they are comparable to the manual extracted parameters, their quality is inferior to parameters extracted from the TLS point cloud.

Surficial geologic map of the Amboy 30' x 60' quadrangle, San Bernardino County, California

USGS Publications Warehouse

Bedford, David R.; Miller, David M.; Phelps, Geoffrey A.

2010-01-01

The surficial geologic map of the Amboy 30' x 60' quadrangle presents characteristics of surficial materials for an area of approximately 5,000 km2 in the eastern Mojave Desert of southern California. This map consists of new surficial mapping conducted between 2000 and 2007, as well as compilations from previous surficial mapping. Surficial geologic units are mapped and described based on depositional process and age categories that reflect the mode of deposition, pedogenic effects following deposition, and, where appropriate, the lithologic nature of the material. Many physical properties were noted and measured during the geologic mapping. This information was used to classify surficial deposits and to understand their ecological importance. We focus on physical properties that drive hydrologic, biologic, and physical processes such as particle-size distribution (PSD) and bulk density. The database contains point data representing locations of samples for both laboratory determined physical properties and semiquantitative field-based information in the database. We include the locations of all field observations and note the type of information collected in the field to help assist in assessing the quality of the mapping. The publication is separated into three parts: documentation, spatial data, and printable map graphics of the database. Documentation includes this pamphlet, which provides a discussion of the surficial geology and units and the map. Spatial data are distributed as ArcGIS Geodatabase in Microsoft Access format and are accompanied by a readme file, which describes the database contents, and FGDC metadata for the spatial map information. Map graphics files are distributed as Postscript and Adobe Portable Document Format (PDF) files that provide a view of the spatial database at the mapped scale.

Multiresolution pattern recognition of small volcanos in Magellan data

NASA Technical Reports Server (NTRS)

Smyth, P.; Anderson, C. H.; Aubele, J. C.; Crumpler, L. S.

1992-01-01

The Magellan data is a treasure-trove for scientific analysis of venusian geology, providing far more detail than was previously available from Pioneer Venus, Venera 15/16, or ground-based radar observations. However, at this point, planetary scientists are being overwhelmed by the sheer quantities of data collected--data analysis technology has not kept pace with our ability to collect and store it. In particular, 'small-shield' volcanos (less than 20 km in diameter) are the most abundant visible geologic feature on the planet. It is estimated, based on extrapolating from previous studies and knowledge of the underlying geologic processes, that there should be on the order of 10(exp 5) to 10(exp 6) of these volcanos visible in the Magellan data. Identifying and studying these volcanos is fundamental to a proper understanding of the geologic evolution of Venus. However, locating and parameterizing them in a manual manner is very time-consuming. Hence, we have undertaken the development of techniques to partially automate this task. The goal is not the unrealistic one of total automation, but rather the development of a useful tool to aid the project scientists. The primary constraints for this particular problem are as follows: (1) the method must be reasonably robust; and (2) the method must be reasonably fast. Unlike most geological features, the small volcanos of Venus can be ascribed to a basic process that produces features with a short list of readily defined characteristics differing significantly from other surface features on Venus. For pattern recognition purposes the relevant criteria include the following: (1) a circular planimetric outline; (2) known diameter frequency distribution from preliminary studies; (3) a limited number of basic morphological shapes; and (4) the common occurrence of a single, circular summit pit at the center of the edifice.

Boundary assessment under uncertainty: A case study

USGS Publications Warehouse

Pawlowsky, V.; Olea, R.A.; Davis, J.C.

1993-01-01

Estimating certain attributes within a geological body whose exact boundary is not known presents problems because of the lack of information. Estimation may result in values that are inadmissible from a geological point of view, especially with attributes which necessarily must be zero outside the boundary, such as the thickness of the oil column outside a reservoir. A simple but effective way to define the boundary is to use indicator kriging in two steps, the first for the purpose of extrapolating control points outside the body, the second to obtain a weighting function which expresses the uncertainty attached to estimations obtained in the boundary region. ?? 1993 International Association for Mathematical Geology.

Preliminary surficial geologic map database of the Amboy 30 x 60 minute quadrangle, California

USGS Publications Warehouse

Bedford, David R.; Miller, David M.; Phelps, Geoffrey A.

2006-01-01

The surficial geologic map database of the Amboy 30x60 minute quadrangle presents characteristics of surficial materials for an area approximately 5,000 km2 in the eastern Mojave Desert of California. This map consists of new surficial mapping conducted between 2000 and 2005, as well as compilations of previous surficial mapping. Surficial geology units are mapped and described based on depositional process and age categories that reflect the mode of deposition, pedogenic effects occurring post-deposition, and, where appropriate, the lithologic nature of the material. The physical properties recorded in the database focus on those that drive hydrologic, biologic, and physical processes such as particle size distribution (PSD) and bulk density. This version of the database is distributed with point data representing locations of samples for both laboratory determined physical properties and semi-quantitative field-based information. Future publications will include the field and laboratory data as well as maps of distributed physical properties across the landscape tied to physical process models where appropriate. The database is distributed in three parts: documentation, spatial map-based data, and printable map graphics of the database. Documentation includes this file, which provides a discussion of the surficial geology and describes the format and content of the map data, a database 'readme' file, which describes the database contents, and FGDC metadata for the spatial map information. Spatial data are distributed as Arc/Info coverage in ESRI interchange (e00) format, or as tabular data in the form of DBF3-file (.DBF) file formats. Map graphics files are distributed as Postscript and Adobe Portable Document Format (PDF) files, and are appropriate for representing a view of the spatial database at the mapped scale.

Stochastic Modelling of Seafloor Morphology

DTIC Science & Technology

1990-06-01

trenches, and linear island chains to the point that many of the interesting questions of marine geology now concern the processes which have shaped...are all located near the Easter Island Microplate (Figure 5.2), a region with a complex tectonic history [Hey et al., 19851, and may be anomalous...the Clipperton Transform Fault [Macdonald and Fox, 1988]. Just south of Clipperton , the ridge crest is shallow (-2550 m) and the crestal horst is broad

Mapping urban geology of the city of Girona, Catalonia

NASA Astrophysics Data System (ADS)

Vilà, Miquel; Torrades, Pau; Pi, Roser; Monleon, Ona

2016-04-01

A detailed and systematic geological characterization of the urban area of Girona has been conducted under the project '1:5000 scale Urban geological map of Catalonia' of the Catalan Geological Survey (Institut Cartogràfic i Geològic de Catalunya). The results of this characterization are organized into: i) a geological information system that includes all the information acquired; ii) a stratigraphic model focused on identification, characterization and correlation of the geological materials and structures present in the area and; iii) a detailed geological map that represents a synthesis of all the collected information. The mapping project integrates in a GIS environment pre-existing cartographic documentation (geological and topographical), core data from compiled boreholes, descriptions of geological outcrops within the urban network and neighbouring areas, physico-chemical characterisation of representative samples of geological materials, detailed geological mapping of Quaternary sediments, subsurface bedrock and artificial deposits and, 3D modelling of the main geological surfaces. The stratigraphic model is structured in a system of geological units that from a chronostratigrafic point of view are structured in Palaeozoic, Paleogene, Neogene, Quaternary and Anthropocene. The description of the geological units is guided by a systematic procedure. It includes the main lithological and structural features of the units that constitute the geological substratum and represents the conceptual base of the 1:5000 urban geological map of the Girona metropolitan area, which is organized into 6 map sheets. These map sheets are composed by a principal map, geological cross sections and, several complementary maps, charts and tables. Regardless of the geological map units, the principal map also represents the main artificial deposits, features related to geohistorical processes, contours of outcrop areas, information obtained in stations, borehole data, and contour lines of the top of the pre-Quaternary basement surface. The most representative complementary maps are the quaternary map, the subsurface bedrock map and the isopach map of thickness of superficial deposits (Quaternary and anthropogenic). The map sheets also include charts and tables of relevant physic-chemical parameters of the geological materials, harmonized downhole lithological columns from selected boreholes, stratigraphic columns, and, photographs and figures illustrating the geology of the mapped area and how urbanization has changed the natural environment. The development of systematic urban geological mapping projects, such as the example of Girona's case, which provides valuable resources to address targeted studies related to urban planning, geoengineering works, soil pollution and other important environmental issues that society should deal with in the future.

Significant achievements in the Planetary Geology Program. [geologic processes, comparative planetology, and solar system evolution

NASA Technical Reports Server (NTRS)

Head, J. W. (Editor)

1978-01-01

Developments reported at a meeting of principal investigators for NASA's planetology geology program are summarized. Topics covered include: constraints on solar system formation; asteriods, comets, and satellites; constraints on planetary interiors; volatiles and regoliths; instrument development techniques; planetary cartography; geological and geochemical constraints on planetary evolution; fluvial processes and channel formation; volcanic processes; Eolian processes; radar studies of planetary surfaces; cratering as a process, landform, and dating method; and the Tharsis region of Mars. Activities at a planetary geology field conference on Eolian processes are reported and techniques recommended for the presentation and analysis of crater size-frequency data are included.

America's Changing Energy Landscape - USGS National Coal Resources Data System Changes to National Energy Resources Data System.

NASA Astrophysics Data System (ADS)

East, J. A., II

2016-12-01

The U.S. Geological Survey's (USGS) Eastern Energy Resources Science Center (EERSC) has an ongoing project which has mapped coal chemistry and stratigraphy since 1977. Over the years, the USGS has collected various forms of coal data and archived that data into the National Coal Resources Data System (NCRDS) database. NCRDS is a repository that houses data from the major coal basins in the United States and includes information on location, seam thickness, coal rank, geologic age, geographic region, geologic province, coalfield, and characteristics of the coal or lithology for that data point. These data points can be linked to the US Coal Quality Database (COALQUAL) to include ultimate, proximate, major, minor and trace-element data. Although coal is an inexpensive energy provider, the United States has shifted away from coal usage recently and branched out into other forms of non-renewable and renewable energy because of environmental concerns. NCRDS's primary method of data capture has been USGS field work coupled with cooperative agreements with state geological agencies and universities doing coal-related research. These agreements are on competitive five-year cycles that have evolved into larger scope research efforts including solid fuel resources such as coal-bed methane, shale gas and oil. Recently these efforts have expanded to include environmental impacts of the use of fossil fuels, which has allowed the USGS to enter into agreements with states for the Geologic CO2 Storage Resources Assessment as required by the Energy Independence and Security Act. In 2016 they expanded into research areas to include geothermal, conventional and unconventional oil and gas. The NCRDS and COALQUAL databases are now online for the public to use, and are in the process of being updated to include new data for other energy resources. Along with this expansion of scope, the database name will change to the National Energy Resources Data System (NERDS) in FY 2017.

On three-dimensional misorientation spaces

PubMed Central

Bennett, Robbie J.; Vukmanovic, Zoja; Solano-Alvarez, Wilberth; Lainé, Steven J.; Einsle, Joshua F.; Midgley, Paul A.; Rae, Catherine M. F.; Hielscher, Ralf

2017-01-01

Determining the local orientation of crystals in engineering and geological materials has become routine with the advent of modern crystallographic mapping techniques. These techniques enable many thousands of orientation measurements to be made, directing attention towards how such orientation data are best studied. Here, we provide a guide to the visualization of misorientation data in three-dimensional vector spaces, reduced by crystal symmetry, to reveal crystallographic orientation relationships. Domains for all point group symmetries are presented and an analysis methodology is developed and applied to identify crystallographic relationships, indicated by clusters in the misorientation space, in examples from materials science and geology. This analysis aids the determination of active deformation mechanisms and evaluation of cluster centres and spread enables more accurate description of transformation processes supporting arguments regarding provenance. PMID:29118660

Geology and land use in the western part of the Gulf Coast coal-bearing region

USGS Publications Warehouse

Warwick, Peter D.; Aubourg, C.E.; Hook, R.W.; SanFilipo, John R.

2002-01-01

This map series is a compilation of the outcrop geology in the U.S. Gulf Coast coal region. The maps show the regional geologic setting for primary coal occurrences and detailed geology and historic mining areas.The CD contains ESRI ArcView SHP files of cities, urban areas, historical mines (points and polygons), counties, current mines, 1:100,000 quadrangle outlines of the study area, fossil fuel powerplants, nuclear powerplants, political boundaries, federally managed lands, roads and railroads in the study area, hydrology in the study area (polygons and arcs), geology nomenclature breaks, geological features (faults), and geology. ArcExplorer is included on the CD.

A 3D geological and geomechanical model of the 1963 Vajont landslide

NASA Astrophysics Data System (ADS)

Bistacchi, Andrea; Massironi, Matteo; Francese, Roberto; Giorgi, Massimo; Chistolini, Filippo; Battista Crosta, Giovanni; Castellanza, Riccardo; Frattini, Paolo; Agliardi, Federico; Frigerio, Gabriele

2014-05-01

The Vajont rockslide has been the object of several studies because of its catastrophic consequences and particular evolution. Several qualitative or quantitative models have been presented in the last 50 years, but a complete explanation of all relevant geological and mechanical processes remains elusive. In order to better understand the mechanics and dynamics of the 1963 event, we have reconstructed the first 3D geological model of the rockslide, which allowed us to accurately investigate the rockslide structure and kinematics. The input data for the model consisted in: pre- and post-rockslide geological maps, pre- and post-rockslide orthophotos, pre- and post-rockslide digital elevation models, structural data, boreholes, and geophysical data (2D and 3D seismics and resistivity). All these data have been integrated in a 3D geological model implemented in Gocad®, using the implicit surface modelling method. Results of the 3D geological model include the depth and geometry of the sliding surface, the volume of the two lobes of the rockslide accumulation, kinematics of the rockslide in terms of the vector field of finite displacement, and high quality meshes useful for mechanical and hydrogeological simulations. The latter can include information about the stratigraphy and internal structure of the rock masses and allow tracing the displacement of different material points in the rockslide from the pre-1963-failure to the post-rockslide state. As a general geological conclusion, we may say that the 3D model allowed us to recognize very effectively a sliding surface, whose non-planar geometry is affected by the interference pattern of two regional-scale fold systems. The rockslide is partitioned into two distinct and internally continuous rock masses with a distinct kinematics, which were characterised by a very limited internal deformation during the slide. The continuity of these two large blocks points to a very localized deformation, occurring along a thin, continuous and weak cataclastic horizon. The chosen modelling strategy, based on both traditional "explicit" and implicit techniques, was found to be very effective for reconstructing complex folded and faulted geological structures, and could be applied also to other geological environments. Finally 3D FEM analyses using the code MidasGTS have been performed adopting the 3D geological model. A c-phi reduction procedure was employed along the pre-defined failure surface until the onset of the landslide occurred. The initiation of the rock mass movements is properly described by considering the evolution of plastic shear strain in the failure surface. The stress, strain and displacement fields of the rock mass were analysed in detail and compared with the monitored data.

Voxel inversion of airborne electromagnetic data

NASA Astrophysics Data System (ADS)

Auken, E.; Fiandaca, G.; Kirkegaard, C.; Vest Christiansen, A.

2013-12-01

Inversion of electromagnetic data usually refers to a model space being linked to the actual observation points, and for airborne surveys the spatial discretization of the model space reflects the flight lines. On the contrary, geological and groundwater models most often refer to a regular voxel grid, not correlated to the geophysical model space. This means that incorporating the geophysical data into the geological and/or hydrological modelling grids involves a spatial relocation of the models, which in itself is a subtle process where valuable information is easily lost. Also the integration of prior information, e.g. from boreholes, is difficult when the observation points do not coincide with the position of the prior information, as well as the joint inversion of airborne and ground-based surveys. We developed a geophysical inversion algorithm working directly in a voxel grid disconnected from the actual measuring points, which then allows for informing directly geological/hydrogeological models, for easier incorporation of prior information and for straightforward integration of different data types in joint inversion. The new voxel model space defines the soil properties (like resistivity) on a set of nodes, and the distribution of the properties is computed everywhere by means of an interpolation function f (e.g. inverse distance or kriging). The position of the nodes is fixed during the inversion and is chosen to sample the soil taking into account topography and inversion resolution. Given this definition of the voxel model space, both 1D and 2D/3D forward responses can be computed. The 1D forward responses are computed as follows: A) a 1D model subdivision, in terms of model thicknesses and direction of the "virtual" horizontal stratification, is defined for each 1D data set. For EM soundings the "virtual" horizontal stratification is set up parallel to the topography at the sounding position. B) the "virtual" 1D models are constructed by interpolating the soil properties in the medium point of the "virtual" layers. For 2D/3D forward responses the algorithm operates similarly, simply filling the 2D/3D meshes of the forward responses by computing the interpolation values in the centres of the mesh cells. The new definition of the voxel model space allows for incorporating straightforwardly the geophysical information into geological and/or hydrological models, just by using for defining the geophysical model space a voxel (hydro)geological grid. This simplify also the propagation of the uncertainty of geophysical parameters into the (hydro)geological models. Furthermore, prior information from boreholes, like resistivity logs, can be applied directly to the voxel model space, even if the borehole positions do not coincide with the actual observation points. In fact, the prior information is constrained to the model parameters through the interpolation function at the borehole locations. The presented algorithm is a further development of the AarhusInv program package developed at Aarhus University (formerly em1dinv), which manages both large scale AEM surveys and ground-based data. This work has been carried out as part of the HyGEM project, supported by the Danish Council of Strategic Research under grant number DSF 11-116763.

Geology of Point Reyes National Seashore and vicinity, California: a digital database

USGS Publications Warehouse

Clark, Jospeh C.; Brabb, Earl E.

1997-01-01

This Open-File report is a digital geologic map database. This pamphlet serves to introduce and describe the digital data. There is no paper map included in the Open-File report. The report does include, however, a PostScript plot file containing an image of the geologic map sheet with explanation, as well as the accompanying text describing the geology of the area. For those interested in a paper plot of information contained in the database or in obtaining the PostScript plot files, please see the section entitled 'For Those Who Aren't Familiar With Digital Geologic Map Databases' below. This digital map database, compiled from previously published and unpublished data and new mapping by the authors, represents the general distribution of surficial deposits and rock units in Point Reyes and surrounding areas. Together with the accompanying text file (pr-geo.txt or pr-geo.ps), it provides current information on the stratigraphy and structural geology of the area covered. The database delineates map units that are identified by general age and lithology following the stratigraphic nomenclature of the U.S. Geological Survey. The scale of the source maps limits the spatial resolution (scale) of the database to 1:48,000 or smaller.

3D imaging of geological structures by R-VSP utilizing vibrations caused by shaft excavations at the Mizunami Underground Research Laboratory in Japan

NASA Astrophysics Data System (ADS)

Matsuoka, T.; Hodotsuka, Y.; Ishigaki, K.; Lee, C.

2009-12-01

Japan Atomic Energy Agency is now conducting the Mizunami Underground Research Laboratory (MIU) project. The MIU consists of two shafts (main shaft: 6.5m, ventilation shaft: 4.5m diameter) and horizontal research galleries, in sedimentary and granitic rocks at Mizunami City, Central Japan. The MIU project is a broad scientific study of the deep geological environment providing the basis for research and development for geological disposal of high level radioactive waste. One of the main goals is to establish techniques for investigation, analysis and assessment of the deep geological environment in fractured crystalline rock. As a part of the MIU project, we carried out the Reverse-Vertical Seismic Profile (R-VSP) using vibrations from the blasting for the shaft excavations and drilling of boreholes in the horizontal research galleries and examined the applicability of this method to imaging of geological structures around underground facilities, such as the unconformity between the sedimentary rocks and the basal granite, and faults and fracture zones in the granite. R-VSP method is a seismic method utilizing the receiver arrays on surface and seismic sources underground (e.g. in boreholes). This method is advantageous in that planning of 3-dimensional surveys is easy compared with reflection seismic surveying and conventional VSP because seismic source arrays that are major constraint for conducting surveys on surface are unnecessary. The receiver arrays consist of six radial lines on surface with a central focus on the main shaft. Seven blast rounds for the main shaft excavation from GL-52.8m to GL-250m and the borehole drilling in the GL-200m horizontal research gallery were observed. Three types of data processing, conventional VSP data processing (VSP-CDP transform and VSP migration), Reflection data processing utilizing Seismic interferometry method (“Seismic interferometry”) and Reflection mapping utilizing Image Point transform method (“IP transform”), were performed to obtain reflection images from heterogeneous geological structure. As the results, the reflective events that seemed to correspond with sedimentary layers, the unconformity between sedimentary rocks and granite, and fracture zones in granite could be detected by reflection profiles using “conventional VSP data processing” and “Seismic interferometry”. However, it is difficult to identify the faults around the MIU because they are generally at a high-angle. “IP transform” is one type of Radon transform which change common shot gather to IP domain. Image Points are defined through geometries of sources and reflectors. Reflection signals in time domain can be accumulated and enhanced in IP domain by “IP transform” on the condition of the right angle to a fault. So, by a search of the direction that reflection signals are enhanced using “IP transform”, the locations of faults can be inferred. By this method, the distribution of faults that correspond with faults in the current geological model constructed from investigation data in the MIU project could be detected.

First Indications of Intraplate Deformations in Central Germany from Reprocessed GNSS Time Series and Geological Data

NASA Astrophysics Data System (ADS)

Becker, Matthias; Leinen, Stefan; Läufer, Gwendolyn; Lehné, Rouwen

2013-04-01

Six years of GPS data have been reprocessed in ITRF2008 for a regional SAPOS CORS network in the federal state of Hesse with 25 stations and some anchor sites of IGS and EPN to derive accurate and consistent coordinate time series. Based on daily network solutions coordinate time series parameters like velocities, offsets in case of antenna changes and annual periodic variation have been estimated. The estimation process includes the fitting of a sophisticated stochastic model for the time series which accounts for inherent time correlation. The results are blended with geological data to verify information from geology on potential recent deformations by the geodetic analyses. Besides of some information on the reprocessing of the GNSS the results the stochastics of the derived velocity field will be discussed in detail. Special emphasis will be on the intra-plate deformation: for the horizontal component the residual velocity field after removal of a plate rotation model is presented, while for the vertical velocities the datum-induced systematic effect is removed in order to analyze the remaining vertical motion. The residual velocity field is then matched with the geology for Hesse. Correlation of both vertical and horizontal movements with major geological structures reveals good accordance. SAPOS stations with documented significant subsidence are mainly located in tertiary Graben structures such as the Lower Hessian Basin (station Kassel), the Wetterau (station Kloppenheim) or the Upper Rhine Graben (Station Darmstadt). From the geological point of view these structures are supposed to be subsiding ones. Other major geological features, i.e. the Rhenish Shield as well as the East Hessian Bunter massif are supposed to be affected by recent uplift. SAPOS stations located in these regions match the assumed movement (e.g. Weilburg, Wiesbaden, Bingen, Fulda). Furthermore SAPOS-derived horizontal movements seem to trace tectonic movements in the region, i.e. extension along the tertiary Graben structures, including a sinistral strike slip component. However, a more detailed analysis is needed to confirm the link between detected movement and geodynamic processes.

Transfer of New Earth Science Understandings to Classroom Teaching: Lessons Learned From Teachers on the Leading Edge

NASA Astrophysics Data System (ADS)

Butler, R.; Ault, C.; Bishop, E.; Southworth-Neumeyer, T.; Magura, B.; Hedeen, C.; Groom, R.; Shay, K.; Wagner, R.

2006-05-01

Teachers on the Leading Edge (TOTLE) provided a field-based teacher professional development program that explored the active continental margin geology of the Pacific Northwest during a two-week field workshop that traversed Oregon from the Pacific Coast to the Snake River. The seventeen teachers on this journey of geological discovery experienced regional examples of subduction-margin geology and examined the critical role of geophysics in connecting geologic features with plate tectonic processes. Two examples of successful transfer of science content learning to classroom teaching are: (1) Great Earthquakes and Tsunamis. This topic was addressed through instruction on earthquake seismology; field observations of tsunami geology; examination of tsunami preparedness of a coastal community; and interactive learning activities for children at an Oregon Museum of Science and Industry (OMSI) Science Camp. Teachers at Sunnyside Environmental School in Portland developed a story line for middle school students called "The Tsunami Hotline" in which inquiries from citizens serve as launch points for studies of tsunamis, earthquakes, and active continental margin geology. OMSI Science Camps is currently developing a new summer science camp program entitled "Tsunami Field Study" for students ages 12-14, based largely on TOTLE's Great Earthquakes and Tsunamis Day. (2) The Grand Cross Section. Connecting regional geologic features with plate tectonic processes was addressed many times during the field workshop. This culminated with teachers drawing cross sections from the Juan de Fuca Ridge across the active continental margin to the accreted terranes of northeast Oregon. Several TOTLE teachers have successfully transferred this activity to their classrooms by having student teams relate earthquakes and volcanoes to plate tectonics through artistic renderings of The Grand Cross Section. Analysis of program learning transfer to classroom teaching (or lack thereof) clearly indicates the importance of pedagogical content knowledge and having teachers share their wisdom in crafting new earth science content knowledge into learning activities. These lessons and adjustments to TOTLE program goals and strategies may be valuable to other Geoscience educators seeking to prepare K-12 teachers to convey the discoveries of EarthScope's USArray and Plate Boundary Observatory experiments to their students.

Undergraduate Field Courses in Volcanology at the University of California, Davis

NASA Astrophysics Data System (ADS)

Schiffman, P.

2002-05-01

At U.C. Davis, undergraduate Geology majors have two opportunities to participate in extended field courses in volcanology: (1) all majors spend one week in a volcanology module during their six-week, "capstone" Summer Field Geology (GEL 110) course, and (2) all majors may enroll in a two-week, Introductory Volcanology course (GEL 138) offered each summer at Kilauea Volcano. The former course is required of all majors in order to fulfill their B.S. degree requirements, whereas the latter fulfills upper division elective units for either the B.A. or B.S. degree in Geology. The volcanology module in GEL 110 is based at U.C.'s White Mountain Research Station in Bishop, California and includes four separate exercises: (1) mapping patterns of consolidation of tephra at the Black Point tuff cone in order to understand the processes of palagonitization, (2) contouring graphic mean and sorting for tephra collected from the Red Cones cinder cone to understand Strombolian processes, (3) measuring a stratigraphic section of the Bishop Tuff in the lower Owens River Gorge to differentiate cooling units in ignimbrites, and (4) mapping the relationships amongst pumice units and obsidian at the Glass Mountain flow to understand evolution of silicic flows. Most exercises require laboratory measurements for grain size or density (Mayfield and Schiffman, 1998). GEL 138, based at the Kilauea Military Camp, includes a daily schedule of morning lectures and afternoon field excursions and exercises. Exercises include: (1) measuring a stratigraphic section of the Keanakako'i Ash Member to interpret pre-1790 periods of hydrovolcanism, (2) measuring and contouring ground temperatures in the Steaming Bluffs thermal area (3) conducting granulometric measurements of tephra from the Nanawale sand hills to understand the genesis of littoral cones, (4) mapping of soil pH around the perimeter of Kilauea Caldera to illuminate climatic effects (i.e.,vog and wind patterns) on the summit region, and (5) mapping lava flows from the SW rift zone of Mauna Loa at South Point. Reference: Mayfield, J. and Schiffman, P., (1998) Measuring the density of porous volcanic rocks in the field using a Saran coating. Journal of Geological Education 46, 460-464.

Establishing a Geologic Baseline Of Cape Canaveral's Natural Landscape: Black Point Drive

NASA Technical Reports Server (NTRS)

Parkinson, Randall W.

2001-01-01

The goal of this project is to identify the process responsible for the formation of geomorphic features in the Black Point Drive area of Merritt Island National Wildlife Refuge/Kennedy Space Center (MINWR/KSC), northwest Cape Canaveral. This study confirms the principal landscape components (geomorphology) of Black Point Drive reflect interaction between surficial sediments deposited in association with late-Quaternary sea-level highstands and the chemical evolution of late-Cenozoic subsurface limestone formations. The Black Point Drive landscape consists of an undulatory mesic terrain which dips westward into myriad circular and channel-like depression marshes and lakes. This geomorphic gradient may reflect: (1) spatial distinctions in the elevation, character or age of buried (pre-Miocene) limestone formations, (2) dissolution history of late-Quaternary coquina and/or (3) thickness of unconsolidated surface sediment. More detailed evaluation of subsurface data will be necessary before this uncertainty can be resolved.

Establishing A Geologic Baseline of Cape Canaveral''s Natural Landscape: Black Point Drive

NASA Technical Reports Server (NTRS)

Parkinson, Randall W.

2002-01-01

The goal of this project is to identify the process responsible for the formation of geomorphic features in the Black Point Drive area of Merritt Island National Wildlife Refuge/Kennedy Space Center (MINWR/KSC), northwest Cape Canaveral. This study confirms the principal landscape components (geomorphology) of Black Point Drive reflect interaction between surficial sediments deposited in association with late-Quaternary sea-level highstands and the chemical evolution of late-Cenozoic sub-surface limestone formations. The Black Point Drive landscape consists of an undulatory mesic terrain which dips westward into myriad circular and channel-like depression marshes and lakes. This geomorphic gradient may reflect: (1) spatial distinctions in the elevation, character or age of buried (pre-Miocene) limestone formations, (2) dissolution history of late-Quaternary coquina and/or (3) thickness of unconsolidated surface sediment. More detailed evaluation of subsurface data will be necessary before this uncertain0 can be resolved.

Geologic Site Characterization of the North Korean Nuclear Test Site at Punggye-Ri: A Reconnaissance Mapping Redux

DTIC Science & Technology

2013-11-30

at the “South Portal”) is evidently located in host rock that is similar to that used in association with the latter two tests (but perhaps having... using image processing algorithms). As the authors point out: “Drainage patterns can provide substantial information on the nature of rock ... metamorphic rocks , with lesser amounts of sedimentary rocks . The metamorphic rocks are mostly schists, fewer types of gneiss, and some

Publications - GMC 363 | Alaska Division of Geological & Geophysical

Science.gov Websites

Division of Geological & Geophysical Surveys Comments: Excel files of grain size data and point count . http://doi.org/10.14509/20244 Publication Products Report Report Information gmc363.pdf (6.6 M) Excel

Forest understory trees can be segmented accurately within sufficiently dense airborne laser scanning point clouds.

PubMed

Hamraz, Hamid; Contreras, Marco A; Zhang, Jun

2017-07-28

Airborne laser scanning (LiDAR) point clouds over large forested areas can be processed to segment individual trees and subsequently extract tree-level information. Existing segmentation procedures typically detect more than 90% of overstory trees, yet they barely detect 60% of understory trees because of the occlusion effect of higher canopy layers. Although understory trees provide limited financial value, they are an essential component of ecosystem functioning by offering habitat for numerous wildlife species and influencing stand development. Here we model the occlusion effect in terms of point density. We estimate the fractions of points representing different canopy layers (one overstory and multiple understory) and also pinpoint the required density for reasonable tree segmentation (where accuracy plateaus). We show that at a density of ~170 pt/m² understory trees can likely be segmented as accurately as overstory trees. Given the advancements of LiDAR sensor technology, point clouds will affordably reach this required density. Using modern computational approaches for big data, the denser point clouds can efficiently be processed to ultimately allow accurate remote quantification of forest resources. The methodology can also be adopted for other similar remote sensing or advanced imaging applications such as geological subsurface modelling or biomedical tissue analysis.

The solusphere-its inferences and study

USGS Publications Warehouse

Rainwater, F.H.; White, W.F.

1958-01-01

Water is a fundamental geologic agent active in rock decomposition, erosion, and synthesis. Solutes in water are of particular interest to geochemists as sources of raw material for synthesis or as products of decomposition. When geochemical studies move from the laboratory into natural environment many variables relating to solute hydrology must be considered. As a focal point there has been designed a graphical representation of solute hydrology, the solusphere, which embodies the concepts of land-water occurrence and movement on which are superimposed geologic, biologic, physical, chemical, and cultural processes affecting solutes. The solusphere is demonstrated by passing an imaginary plane through the centre of the earth. This plane intercepts concentric zones designated as rock flowage, saturation, aeration, surface activity, and atmosphere. Transport processes carry solutes within and between zones without alteration or conversion. However, whether stationary or in motion, the water's solute character is constantly subject to (1) alteration processes that change concentration by addition or subtraction of solutes or solvent without loss of solute identities, and (2) conversion processes that change the chemical state and form of solutes. The geochemist is concerned with specific conversion processes, but he also must consider transport, alteration, and other conversion processes that are continually modifying the materials with which he is dealing in nature. The solusphere is an attempt to organize processes affecting the chemical quality of land waters into a unified field of science much like the field of marine chemistry. ?? 1958.

Reports of Planetary Geology Program, 1982

NASA Technical Reports Server (NTRS)

Holt, H. E. (Compiler)

1982-01-01

Work conducted in the Planetary Geology program is summarized. The following categories are presented: outer solar system satellites; asteroids and comets; Venus; cratering processes and landform development; volcanic processes and landforms; aolian processes and landforms; fluvial processes and landform development; periglacial and permafrost processes; structure, tectonics and stratigraphy; remote sensing and regolith studies; geologic mapping, cartography and geodesy.

The application of automatic recognition techniques in the Apollo 9 SO-65 experiment

NASA Technical Reports Server (NTRS)

Macdonald, R. B.

1970-01-01

A synoptic feature analysis is reported on Apollo 9 remote earth surface photographs that uses the methods of statistical pattern recognition to classify density points and clusterings in digital conversion of optical data. A computer derived geological map of a geological test site indicates that geological features of the range are separable, but that specific rock types are not identifiable.

U.S. Geological Survey land remote sensing activities

USGS Publications Warehouse

Frederick, Doyle G.

1983-01-01

The U.S. Geological Survey (USGS) and the Department of the Interior (DOI) were among the earliest to recognize the potential applications of satellite land remote sensing for management of the country's land and water resources…not only as a user but also as a program participant responsible for final data processing, product generation, and data distribution. With guidance from Dr. William T. Pecora, who was the Survey's Director at that time and later Under Secretary of Interior, the Earth Resources Observation Systems (EROS) Program was established in 1966 as a focal point for these activities within the Department. Dr. Pecora was among the few who could envision a role for the Survey and the Department as active participants in programs yet to come--like the Landsat, Magsat, Seasat and, most recently, Shuttle Imaging Radar programs.

Model Package Report: Central Plateau Vadose Zone Geoframework Version 1.0

DOE Office of Scientific and Technical Information (OSTI.GOV)

Springer, Sarah D.

The purpose of the Central Plateau Vadose Zone (CPVZ) Geoframework model (GFM) is to provide a reasonable, consistent, and defensible three-dimensional (3D) representation of the vadose zone beneath the Central Plateau at the Hanford Site to support the Composite Analysis (CA) vadose zone contaminant fate and transport models. The GFM is a 3D representation of the subsurface geologic structure. From this 3D geologic model, exported results in the form of point, surface, and/or volumes are used as inputs to populate and assemble the various numerical model architectures, providing a 3D-layered grid that is consistent with the GFM. The objective ofmore » this report is to define the process used to produce a hydrostratigraphic model for the vadose zone beneath the Hanford Site Central Plateau and the corresponding CA domain.« less

Geologic map and digital database of the Porcupine Wash 7.5 minute Quadrangle, Riverside County, southern California

USGS Publications Warehouse

Powell, Robert E.

2001-01-01

This data set maps and describes the geology of the Porcupine Wash 7.5 minute quadrangle, Riverside County, southern California. The quadrangle, situated in Joshua Tree National Park in the eastern Transverse Ranges physiographic and structural province, encompasses parts of the Hexie Mountains, Cottonwood Mountains, northern Eagle Mountains, and south flank of Pinto Basin. It is underlain by a basement terrane comprising Proterozoic metamorphic rocks, Mesozoic plutonic rocks, and Mesozoic and Mesozoic or Cenozoic hypabyssal dikes. The basement terrane is capped by a widespread Tertiary erosion surface preserved in remnants in the Eagle and Cottonwood Mountains and buried beneath Cenozoic deposits in Pinto Basin. Locally, Miocene basalt overlies the erosion surface. A sequence of at least three Quaternary pediments is planed into the north piedmont of the Eagle and Hexie Mountains, each in turn overlain by successively younger residual and alluvial deposits. The Tertiary erosion surface is deformed and broken by north-northwest-trending, high-angle, dip-slip faults and an east-west trending system of high-angle dip- and left-slip faults. East-west trending faults are younger than and perhaps in part coeval with faults of the northwest-trending set. The Porcupine Wash database was created using ARCVIEW and ARC/INFO, which are geographical information system (GIS) software products of Envronmental Systems Research Institute (ESRI). The database consists of the following items: (1) a map coverage showing faults and geologic contacts and units, (2) a separate coverage showing dikes, (3) a coverage showing structural data, (4) a scanned topographic base at a scale of 1:24,000, and (5) attribute tables for geologic units (polygons and regions), contacts (arcs), and site-specific data (points). The database, accompanied by a pamphlet file and this metadata file, also includes the following graphic and text products: (1) A portable document file (.pdf) containing a navigable graphic of the geologic map on a 1:24,000 topographic base. The map is accompanied by a marginal explanation consisting of a Description of Map and Database Units (DMU), a Correlation of Map and Database Units (CMU), and a key to point-and line-symbols. (2) Separate .pdf files of the DMU and CMU, individually. (3) A PostScript graphic-file containing the geologic map on a 1:24,000 topographic base accompanied by the marginal explanation. (4) A pamphlet that describes the database and how to access it. Within the database, geologic contacts , faults, and dikes are represented as lines (arcs), geologic units as polygons and regions, and site-specific data as points. Polygon, arc, and point attribute tables (.pat, .aat, and .pat, respectively) uniquely identify each geologic datum and link it to other tables (.rel) that provide more detailed geologic information.

Implications of abundant hygroscopic minerals in the Martian regolith

NASA Technical Reports Server (NTRS)

Clark, B. C.

1978-01-01

Converging lines of evidence suggest that a significant portion of the Martian surface fines may consist of salts and smectite clays. Salts can form stoichiometric hydrates as well as eutectic solutions with depressed freezing points; clays contain bound water of constitution and adsorb significant quantities of water from the vapor phase. The formation of ice may be suppressed by these minerals in some regions on Mars, and their presence in abundance would imply important consequences for atmospheric and geologic processes and the prospects for exobiology.

3D Stratigraphic Modeling of Central Aachen

NASA Astrophysics Data System (ADS)

Dong, M.; Neukum, C.; Azzam, R.; Hu, H.

2010-05-01

Since 1980s, advanced computer hardware and software technologies, as well as multidisciplinary research have provided possibilities to develop advanced three dimensional (3D) simulation software for geosciences application. Some countries, such as USA1) and Canada2) 3), have built up regional 3D geological models based on archival geological data. Such models have played huge roles in engineering geology2), hydrogeology2) 3), geothermal industry1) and so on. In cooperating with the Municipality of Aachen, the Department of Engineering Geology of RWTH Aachen University have built up a computer-based 3D stratigraphic model of 50 meter' depth for the center of Aachen, which is a 5 km by 7 km geologically complex area. The uncorrelated data from multi-resources, discontinuous nature and unconformable connection of the units are main challenges for geological modeling in this area. The reliability of 3D geological models largely depends on the quality and quantity of data. Existing 1D and 2D geological data were collected, including 1) approximately 6970 borehole data of different depth compiled in Microsoft Access database and MapInfo database; 2) a Digital Elevation Model (DEM); 3) geological cross sections; and 4) stratigraphic maps in 1m, 2m and 5m depth. Since acquired data are of variable origins, they were managed step by step. The main processes are described below: 1) Typing errors of borehole data were identified and the corrected data were exported to Variowin2.2 to distinguish duplicate points; 2) The surface elevation of borehole data was compared to the DEM, and differences larger than 3m were eliminated. Moreover, where elevation data missed, it was read from the DEM; 3) Considerable data were collected from municipal constructions, such as residential buildings, factories, and roads. Therefore, many boreholes are spatially clustered, and only one or two representative points were picked out in such areas; After above procedures, 5839 boreholes with -x, -y, -z coordinates, down-hole depth, and stratigraphic information are available. 4) We grouped stratigraphic units into four main layers based on analysis of geological settings of the modeling area. The stratigraphic units extend from Quaternary, Cretaceous, Carboniferous to Devonian. In order to facilitate the determination of each unit boundaries, a series of standard code was used to integrate data with different descriptive attributes. 5) The Quaternary and Cretaceous units are characterized by subhorizontal layers. Kriging interpolation was processed to the borehole data in order to estimate data distribution and surface relief for the layers. 6) The Carboniferous and Devonian units are folded. The lack of software support, concerning simulating folds and the shallow depth of boreholes and cross sections constrained the determination of geological boundaries. A strategy of digitalizing the fold surfaces from cross sections and establishing them as inclined strata was followed. The modeling was simply subdivided into two steps. The first step consisted of importing data into the modeling software. The second step involved the construction of subhorizontal layers and folds, which were constrained by geological maps, cross sections and outcrops. The construction of the 3D stratigraphic model is of high relevance to further simulation and application, such as 1) lithological modeling; 2) answering simple questions such as "At which unit is the water table?" and calculating volume of groundwater storage during assessment of aquifer vulnerability to contamination; and 3) assigned by geotechnical properties in grids and providing them for user required application. Acknowledgements: Borehole data is kindly provided by the Municipality of Aachen. References: 1. Janet T. Watt, Jonathan M.G. Glen, David A. John and David A. Ponce (2007) Three-dimensional geologic model of the northern Nevada rift and the Beowawe geothermal system, north-central Nevada. Geosphere, v. 3; no. 6; p. 667-682 2. Martin Ross, Michel Parent and René Lefebvre (2005) 3D geologic framework models for regional hydrogeology and land-use management: a case study from a Quaternary basin of southwestern Quebec, Canada. Hydrogeology Journal, 13:690-707 3. Martin Ross, Richard Martel, René Lefebvre, Michel Parent and Martine M. Savard (2004) Assessing rock aquifer vulnerability using downward advective times from a 3D model of surficial geology: A case study from the St. Lawrence Lowlands, Canada. Geofísica Internacional Vol. 43, Num. 4, pp. 591-602

Geologic map and digital database of the Conejo Well 7.5 minute quadrangle, Riverside County, Southern California

USGS Publications Warehouse

Powell, Robert E.

2001-01-01

This data set maps and describes the geology of the Conejo Well 7.5 minute quadrangle, Riverside County, southern California. The quadrangle, situated in Joshua Tree National Park in the eastern Transverse Ranges physiographic and structural province, encompasses part of the northern Eagle Mountains and part of the south flank of Pinto Basin. It is underlain by a basement terrane comprising Proterozoic metamorphic rocks, Mesozoic plutonic rocks, and Mesozoic and Mesozoic or Cenozoic hypabyssal dikes. The basement terrane is capped by a widespread Tertiary erosion surface preserved in remnants in the Eagle Mountains and buried beneath Cenozoic deposits in Pinto Basin. Locally, Miocene basalt overlies the erosion surface. A sequence of at least three Quaternary pediments is planed into the north piedmont of the Eagle Mountains, each in turn overlain by successively younger residual and alluvial deposits. The Tertiary erosion surface is deformed and broken by north-northwest-trending, high-angle, dip-slip faults in the Eagle Mountains and an east-west trending system of high-angle dip- and left-slip faults. In and adjacent to the Conejo Well quadrangle, faults of the northwest-trending set displace Miocene sedimentary rocks and basalt deposited on the Tertiary erosion surface and Pliocene and (or) Pleistocene deposits that accumulated on the oldest pediment. Faults of this system appear to be overlain by Pleistocene deposits that accumulated on younger pediments. East-west trending faults are younger than and perhaps in part coeval with faults of the northwest-trending set. The Conejo Well database was created using ARCVIEW and ARC/INFO, which are geographical information system (GIS) software products of Envronmental Systems Research Institute (ESRI). The database consists of the following items: (1) a map coverage showing faults and geologic contacts and units, (2) a separate coverage showing dikes, (3) a coverage showing structural data, (4) a point coverage containing line ornamentation, and (5) a scanned topographic base at a scale of 1:24,000. The coverages include attribute tables for geologic units (polygons and regions), contacts (arcs), and site-specific data (points). The database, accompanied by a pamphlet file and this metadata file, also includes the following graphic and text products: (1) A portable document file (.pdf) containing a navigable graphic of the geologic map on a 1:24,000 topographic base. The map is accompanied by a marginal explanation consisting of a Description of Map and Database Units (DMU), a Correlation of Map and Database Units (CMU), and a key to point-and line-symbols. (2) Separate .pdf files of the DMU and CMU, individually. (3) A PostScript graphic-file containing the geologic map on a 1:24,000 topographic base accompanied by the marginal explanation. (4) A pamphlet that describes the database and how to access it. Within the database, geologic contacts , faults, and dikes are represented as lines (arcs), geologic units as polygons and regions, and site-specific data as points. Polygon, arc, and point attribute tables (.pat, .aat, and .pat, respectively) uniquely identify each geologic datum and link it to other tables (.rel) that provide more detailed geologic information.

Using Snow to Teach Geology.

ERIC Educational Resources Information Center

Roth, Charles

1991-01-01

A lesson plan, directed at middle school students and older, describes using snow to study the geological processes of solidification of molten material, sedimentation, and metamorphosis. Provides background information on these geological processes. (MCO)

California State Waters Map Series-Offshore of Point Reyes, California

USGS Publications Warehouse

Watt, Janet T.; Dartnell, Peter; Golden, Nadine E.; Greene, H. Gary; Erdey, Mercedes D.; Cochrane, Guy R.; Johnson, Samuel Y.; Hartwell, Stephen R.; Kvitek, Rikk G.; Manson, Michael W.; Endris, Charles A.; Dieter, Bryan E.; Sliter, Ray W.; Krigsman, Lisa M.; Lowe, Erik; Chinn, John L.; Watt, Janet T.; Cochran, Susan A.

2015-01-01

This publication about the Offshore of Point Reyes map area includes ten map sheets that contain explanatory text, in addition to this descriptive pamphlet and a data catalog of geographic information system (GIS) files. Sheets 1, 2, and 3 combine data from four different sonar surveys to generate comprehensive high-resolution bathymetry and acoustic-backscatter coverage of the map area. These data reveal a range of physiographic features (highlighted in the perspective views on sheet 4) such as the flat, sediment-covered seafloor in Drakes Bay, as well as abundant “scour depressions” on the Bodega Head–Tomales Point shelf (see sheet 9) and local, tectonically controlled bedrock uplifts. To validate geological and biological interpretations of the sonar data shown in sheets 1, 2, and 3, the U.S. Geological Survey towed a camera sled over specific offshore locations, collecting both video and photographic imagery; these “ground-truth” surveying data are summarized on sheet 6. Sheet 5 is a “seafloor character” map, which classifies the seafloor on the basis of depth, slope, rugosity (ruggedness), and backscatter intensity and which is further informed by the ground-truth-survey imagery. Sheet 7 is a map of “potential habitats,” which are delineated on the basis of substrate type, geomorphology, seafloor process, or other attributes that may provide a habitat for a specific species or assemblage of organisms. Sheet 8 compiles representative seismic-reflection profiles from the map area, providing information on the subsurface stratigraphy and structure of the map area. Sheet 9 shows the distribution and thickness of young sediment (deposited over the last about 21,000 years, during the most recent sea-level rise) in both the map area and the larger Salt Point to Drakes Bay region, interpreted on the basis of the seismic-reflection data, and it identifies the Offshore of Point Reyes map area as lying within the Bodega Head–Tomales Point shelf, Point Reyes bar, and Bolinas shelf domains. Sheet 10 is a geologic map that merges onshore geologic mapping (compiled from existing maps by the California Geological Survey) and new offshore geologic mapping that is based on integration of high-resolution bathymetry and backscatter imagery (sheets 1, 2, 3), seafloor-sediment and rock samples (Reid and others, 2006), digital camera and video imagery (sheet 6), and high-resolution seismic-reflection profiles (sheet 8), as well as aerial-photographic interpretation of nearshore areas. The information provided by the map sheets, pamphlet, and data catalog have a broad range of applications. High-resolution bathymetry, acoustic backscatter, ground-truth-surveying imagery, and habitat mapping all contribute to habitat characterization and ecosystem-based management by providing essential data for delineation of marine protected areas and ecosystem restoration. Many of the maps provide high-resolution baselines that will be critical for monitoring environmental change associated with climate change, coastal development, or other forcings. High-resolution bathymetry is a critical component for modeling coastal flooding caused by storms and tsunamis, as well as inundation associated with longer term sea-level rise. Seismic-reflection and bathymetric data help characterize earthquake and tsunami sources, critical for natural-hazard assessments of coastal zones. Information on sediment distribution and thickness is essential to the understanding of local and regional sediment transport, as well as the development of regional sediment-management plans. In addition, siting of any new offshore infrastructure (for example, pipelines, cables, or renewable-energy facilities) will depend on high-resolution mapping. Finally, this mapping will both stimulate and enable new scientific research and also raise public awareness of, and education about, coastal environments and issues.

Apollo 16 prime and backup crewmen during geological field trip in New Mexico

NASA Image and Video Library

1971-09-09

Dr. Lee Silver (pointing foregroung), California Institute of Technology, calls a geological feature near Taos, New Mexico, to the attention of Apollo 16 prime and backup crewmen during a geological field trip. The crewmen, from left to right, are Astronauts Charles M. Duke Jr., lunar module pilot; Fred W. Haise Jr., backup commander; Edgar D. Mitchell, backup Lunar Module pilot; and John W. Young, commander.

An Alternative Georoute: Approaching the Geological Heritage of the SE Part of Milos Island, Greece, via Hiking, Kayaking and Snorkeling

NASA Astrophysics Data System (ADS)

Mavrogonatos, Constantinos; Galanopoulos, Evangelos; Anastasatou, Marianthi; Chadjimpaloglou, Petros; Xydous, Stamatios

2015-04-01

Milos Island is located at the southwest edge of the Cyclades island complex, in the central part of the Aegean archipelago. It is part of the modern South Aegean Volcanic Arc (SAVA), which belongs to the Hellenic subduction zone. This on-going process has resulted in the coexistence of complex geological formations and geodynamic phenomena with sceneries of incomparable natural beauty, in many areas along the arc. Among them, Milos Island is widely known to be a place of astonishing geological and natural wealth, combined with a cultural heritage that dates back to the 8th millennium BC. As geotourism has been rapidly evolving worldwide over the last years, Milos Island was among the first places in Greece that developed a network of geotrails and featured many sites of special interest in terms of geology, volcanology and geoarchaeology. This study proposes an original georoute through land and sea, which aims t? emerge both overland and underwater areas of special interest. It is a novel way to approach the geological and cultural wealth of Milos and focuses on the Aghia Kiriaki area, at the South part of the island. This alternative georoute includes hiking, kayaking and snorkeling, and anyone who follows it, can be guided to a significant number of important geological, volcanic, morphological and geoarcheological sites, in a relatively narrow area, combining athletic activities as well. The proposed georoute has a total length of 3,2 km and an estimated time of completion of about 4 hours. It starts from Aghia Kiriaki area, where visitors can see remnants of one of the island's collapsed calderic domes in a panoramic view towards the East. In the same site, volcanic emanations create impressive scenery, which introduces the participants to aspects of the island's geologic and volcanic history. After about 800 meters of hiking, throughout an area that is dominated by products of phreatic eruptions, Aghia Kiriaki beach is the next stop. Impressive findings of roman pottery can be observed in this site. At this point, hiking alters to kayaking eastwards along the coastline until the third stop, Psarovolada beach. Extended outcrops of the metamorphic basement of the island, along with submerged hot springs are also observed in the area, while not far away from this point, the most daring participants can dive and enjoy the underwater view of the hot springs at the bottom of the sea. The kayaks are used for further 150m until the unique site of the pre-volcanic formations of the island. From this point, georoute continues and visitors have again the opportunity to dive and approach another submerged hot springs location, just by swimming approximately 20 m eastwards. The sea trip ends at Sirocco, which is located in the center of the Paleochori Beach, where visitors can evaluate their experience. The proposed georoute aims to highlight that preservation of the geological heritage fosters values that promote society and geotourism is an excellent motivation of implementation.

Characterization of Sedimentary Deposits Using usSEABED for Large-scale Mapping, Modeling and Research of U.S.Continental Margins

NASA Astrophysics Data System (ADS)

Williams, S. J.; Reid, J. A.; Arsenault, M. A.; Jenkins, C.

2006-12-01

Geologic maps of offshore areas containing detailed morphologic features and sediment character can serve many scientific and operational purposes. Such maps have been lacking, but recent computer technology and software to capture diverse marine data are offering promise. Continental margins, products of complex geologic history and dynamic oceanographic processes, dominated by the Holocene marine transgression, contain landforms which provide a variety of important functions: critical habitats for fish, ship navigation, national defense, and engineering activities (i.e., oil and gas platforms, pipeline and cable routes, wind-energy sites) and contain important sedimentary records. Some shelf areas also contain sedimentary deposits such as sand and gravel, regarded as potential aggregate resources for mitigating coastal erosion, reducing vulnerability to hazards, and restoring ecosystems. Because coastal and offshore areas are increasingly important, knowledge of the framework geology and marine processes is useful to many. Especially valuable are comprehensive and integrated digital databases based on data from original sources in the marine community. Products of interest are GIS maps containing thematic information such as seafloor physiography, geology, sediment character and texture, seafloor roughness, and geotechnical engineering properties. These map products are useful to scientists modeling nearshore and shelf processes as well as planners and managers. The USGS with partners is leading a Nation-wide program to gather a wide variety of extant marine geologic data into the usSEABED system (http://walrus.wr.usgs/usseabed). This provides a centralized, fully integrated digital database of marine geologic data collected over the past 50 years by USGS, other federal and state agencies, universities and private companies. To date, approximately 325,000 data points from the U.S. EEZ reside in usSEABED. The usSEABED, which combines a broad array of physical data and information (both analytical and descriptive) about the sea floor, including sediment textural, statistical, geochemical, geophysical, and compositional information, is available to the marine community through USGS Data Series publications. Three DS reports for the Atlantic (DS-118), Gulf of Mexico (DS-146) and Pacific(DS-182) were published in 2006 and reports for HI and AK are forthcoming. The use of usSEABED and derivative map products are part of ongoing USGS efforts to conduct regional assessments of potential marine sand and gravel resources, map benthic habitats, and support research in understanding seafloor character and mobility, transport processes and natural resources.

On the Relationship Between Site Geology and the Distribution of Surface Regolith Compositions at the Apollo Sites

NASA Technical Reports Server (NTRS)

Korotev, Randy L.

2000-01-01

Some considerations are discussed on how information on site geology can be obtained from the distribution of data points on 2-element plots of composition of lunar regolith samples collected along a traverse.

Subduction zones: Not relevant to present-day problems of waste disposal

USGS Publications Warehouse

Silver, E.A.

1972-01-01

SUBDUCTION zones are considered to be sites of disposal for vast areas of the Earth's surface1, while new surface is generated simultaneously at rise crests2. Bostrom and Sherif3 suggest that the world's industrial and domestic waste be dumped into subduction zones at deep sea trenches to allow nature to complete the recycling process at geologically rapid rates of 5 to 10 cm/yr. They also point out that trenches are often sites of rapid rates of deposition and suggest that the dumped wastes would, speaking geologically, soon be buried. Francis4 suggests that canisters of toxic chemical and radioactive wastes could be dumped onto trench sediments and be expected to sink at rates of 20 m/yr, assuming that the mass of turbidites in the trench fill often spontaneously liquefies on shaking by earthquakes. The assumption is based on the supposed lack of evidence for deformed sediment in trenches. I will argue that the suggestion of Bostrom and Sherif3 is not useful for the next few dozen generations of human populations and will point out observational evidence to show that Francis's4 assumption is incorrectly founded. ?? 1972 Nature Publishing Group.

A demonstration of ERTS-1 analog and digital techniques applied to strip mining in Maryland and West Virginia

NASA Technical Reports Server (NTRS)

Anderson, A. T.; Schubert, J.

1974-01-01

The largest contour strip mining operations in western Maryland and West Virginia are located within the Georges Creek and the Upper Potomac Basins. These two coal basins lie within the Georges Creek (Wellersburg) syncline. The disturbed strip mine areas were delineated with the surrounding geological and vegetation features using ERTS-1 data in both analog (imagery) and digital form. The two digital systems used were: (1) the ERTS-Analysis system, a point-by-point digital analysis of spectral signatures based on known spectral values, and (2) the LARS Automatic Data Processing System. The digital techniques being developed will later be incorporated into a data base for land use planning. These two systems aided in efforts to determine the extent and state of strip mining in this region. Aircraft data, ground verification information, and geological field studies also aided in the application of ERTS-1 imagery to perform an integrated analysis that assessed the adverse effects of strip mining. The results indicated that ERTS can both monitor and map the extent of strip mining to determine immediately the acreage affected and indicate where future reclamation and revegetation may be necessary.

Swath Bathymetry Surveys of the Monterey Bay Area from Point Ano Nuevo to Moss Landing, San Mateo, Santa Cruz, and Monterey Counties, California

USGS Publications Warehouse

Ritchie, Andrew C.; Finlayson, David P.; Logan, Joshua B.

2010-01-01

This report describes swath bathymetry and backscatter data acquired by the U.S. Geological Survey on the continental shelf within the Monterey Bay National Marine Sanctuary between Point A?o Nuevo and Moss Landing, in San Mateo, Santa Cruz, and Monterey Counties, Calif. The survey was done for the California Seafloor Mapping Program (CSMP), in field activities S-7-09-MB and S-10-09-MB, by the Western Coastal and Marine Geology (WCMG) Team of the U.S. Geological Survey (USGS). The data were aquired in two seperate surveys: (1) between August 13, 2009 and September 3, 2009, personnel from WCMG completed field activity S-7-09-MB, from Point A?o Nuevo south to Table Rock, as well as a block west of Soquel Canyon; (2) between October 12 and December 16, 2009, WCMG conducted field activity S-10-09-MB, surveying between Table Rock and Moss Landing.

Intrasite motions and monument instabilities at Medicina ITRF co-location site

NASA Astrophysics Data System (ADS)

Sarti, Pierguido; Abbondanza, Claudio; Legrand, Juliette; Bruyninx, Carine; Vittuari, Luca; Ray, Jim

2013-03-01

We process the total-station surveys performed at the ITRF co-location site Medicina (Northern Italy) over the decade (2001-2010) with the purpose of determining the extent of local intrasite motions and relating them to local geophysical processes, the geological setting and the design of the ground pillars. In addition, continuous observations acquired by two co-located GPS stations (MEDI and MSEL separated by ≈27 m) are analysed and their relative motion is cross-checked with the total-station results. The local ground control network extends over a small area (<100 × 100 m) but the results demonstrate significant anisotropic deformations with rates up to 1.6 mm a-1, primarily horizontal, a value comparable to intraplate tectonic deformations. The results derived from GPS and total-station observations are consistent and point to the presence of horizontal intrasite motions over very short distances possibly associated with varying environmental conditions in a very unfavourable local geological setting and unsuitable monument design, these latter being crucial aspects of the realization and maintenance of global permanent geodetic networks and the global terrestrial reference frame.

A machine learning approach to the potential-field method for implicit modeling of geological structures

NASA Astrophysics Data System (ADS)

Gonçalves, Ítalo Gomes; Kumaira, Sissa; Guadagnin, Felipe

2017-06-01

Implicit modeling has experienced a rise in popularity over the last decade due to its advantages in terms of speed and reproducibility in comparison with manual digitization of geological structures. The potential-field method consists in interpolating a scalar function that indicates to which side of a geological boundary a given point belongs to, based on cokriging of point data and structural orientations. This work proposes a vector potential-field solution from a machine learning perspective, recasting the problem as multi-class classification, which alleviates some of the original method's assumptions. The potentials related to each geological class are interpreted in a compositional data framework. Variogram modeling is avoided through the use of maximum likelihood to train the model, and an uncertainty measure is introduced. The methodology was applied to the modeling of a sample dataset provided with the software Move™. The calculations were implemented in the R language and 3D visualizations were prepared with the rgl package.

Exploring structures of the Rochefort Cave (Belgium) with 3D models from LIDAR scans and UAV photoscans.

NASA Astrophysics Data System (ADS)

Watlet, A.; Triantafyllou, A.; Kaufmann, O.; Le Mouelic, S.

2016-12-01

Amongst today's techniques that are able to produce 3D point clouds, LIDAR and UAV (Unmanned Aerial Vehicle) photogrammetry are probably the most commonly used. Both methods have their own advantages and limitations. LIDAR scans create high resolution and high precision 3D point clouds, but such methods are generally costly, especially for sporadic surveys. Compared to LIDAR, UAV (e.g. drones) are cheap and flexible to use in different types of environments. Moreover, the photogrammetric processing workflow of digital images taken with UAV becomes easier with the rise of many affordable software packages (e.g., Agisoft PhotoScan, MicMac, VisualSFM). In this canvas, we present a challenging study made at the Rochefort Cave Laboratory (South Belgium) comprising surface and underground surveys. The main chamber of the cave ( 10000 m³) was the principal target of the study. A LIDAR scan and an UAV photoscan were acquired underground, producing respective 3D models. An additional 3D photoscan was performed at the surface, in the sinkhole in direct connection with the main chamber. The main goal of the project is to combine this different datasets for quantifying the orientation of inaccessible geological structures (e.g. faults, tectonic and gravitational joints, and sediments bedding), and for comparing them to structural data surveyed on the field. To go through structural interpretations, we used a subsampling method merging neighboured model polygons that have similar orientations, allowing statistical analyses of polygons spatial distribution. The benefit of this method is to verify the spatial continuity of in-situ structural measurements to larger scale. Roughness and colorimetric/spectral analyses may also be of great interest for several geosciences purposes by discriminating different facies among the geological beddings. Amongst others, this study was helpful to precise the local petrophysical properties associated with particular geological layers, what improved interpreting results from an ERT monitoring of the karst hydrological processes in terms of groundwater content.

How Geoscience Novices Reason about Temporal Duration: The Role of Spatial Thinking and Large Numbers

ERIC Educational Resources Information Center

Cheek, Kim A.

2013-01-01

Research about geologic time conceptions generally focuses on the placement of events on the geologic timescale, with few studies dealing with the duration of geologic processes or events. Those studies indicate that students often have very poor conceptions about temporal durations of geologic processes, but the reasons for that are relatively…

30 CFR 251.11 - Submission, inspection, and selection of geological data and information collected under a permit...

Code of Federal Regulations, 2010 CFR

2010-07-01

... geological data and information collected under a permit and processed by permittees or third parties. 251.11... GEOLOGICAL AND GEOPHYSICAL (G&G) EXPLORATIONS OF THE OUTER CONTINENTAL SHELF § 251.11 Submission, inspection, and selection of geological data and information collected under a permit and processed by permittees...

Beyond data collection in digital mapping: interpretation, sketching and thought process elements in geological map making

NASA Astrophysics Data System (ADS)

Watkins, Hannah; Bond, Clare; Butler, Rob

2016-04-01

Geological mapping techniques have advanced significantly in recent years from paper fieldslips to Toughbook, smartphone and tablet mapping; but how do the methods used to create a geological map affect the thought processes that result in the final map interpretation? Geological maps have many key roles in the field of geosciences including understanding geological processes and geometries in 3D, interpreting geological histories and understanding stratigraphic relationships in 2D and 3D. Here we consider the impact of the methods used to create a map on the thought processes that result in the final geological map interpretation. As mapping technology has advanced in recent years, the way in which we produce geological maps has also changed. Traditional geological mapping is undertaken using paper fieldslips, pencils and compass clinometers. The map interpretation evolves through time as data is collected. This interpretive process that results in the final geological map is often supported by recording in a field notebook, observations, ideas and alternative geological models explored with the use of sketches and evolutionary diagrams. In combination the field map and notebook can be used to challenge the map interpretation and consider its uncertainties. These uncertainties and the balance of data to interpretation are often lost in the creation of published 'fair' copy geological maps. The advent of Toughbooks, smartphones and tablets in the production of geological maps has changed the process of map creation. Digital data collection, particularly through the use of inbuilt gyrometers in phones and tablets, has changed smartphones into geological mapping tools that can be used to collect lots of geological data quickly. With GPS functionality this data is also geospatially located, assuming good GPS connectivity, and can be linked to georeferenced infield photography. In contrast line drawing, for example for lithological boundary interpretation and sketching, is yet to find the digital flow that is achieved with pencil on notebook page or map. Free-form integrated sketching and notebook functionality in geological mapping software packages is in its nascence. Hence, the result is a tendency for digital geological mapping to focus on the ease of data collection rather than on the thoughts and careful observations that come from notebook sketching and interpreting boundaries on a map in the field. The final digital geological map can be assessed for when and where data was recorded, but the thought processes of the mapper are less easily assessed, and the use of observations and sketching to generate ideas and interpretations maybe inhibited by reliance on digital mapping methods. All mapping methods used have their own distinct advantages and disadvantages and with more recent technologies both hardware and software issues have arisen. We present field examples of using conventional fieldslip mapping, and compare these with more advanced technologies to highlight some of the main advantages and disadvantages of each method and discuss where geological mapping may be going in the future.

Geological research for public outreach and education in Lithuania

NASA Astrophysics Data System (ADS)

Skridlaite, Grazina; Guobyte, Rimante

2013-04-01

Successful IYPE activities and implementation of Geoheritage day in Lithuania increased public awareness in geology. A series of projects introducing geology to the general public and youth, supported by EU funds and local communities, were initiated. Researchers from the scientific and applied geology institutions of Lithuania participated in these projects and provided with the geological data. In one case, the Lithuanian Survey of Protected Areas supported the installation of a series of geological exhibitions in several regional and national parks. An animation demonstrating glacial processes was chosen for most of these because the Lithuanian surface is largely covered with sedimentary deposits of the Nemunas (Weichselian) glaciation. Researchers from the Lithuanian Geological Survey used the mapping results to demonstrate real glacial processes for every chosen area. In another case, 3D models showing underground structures of different localities were based on detailed geological maps and profiles obtained for that area. In case of the Sartai regional park, the results of previous geological research projects provided the possibility to create a movie depicting the ca. 2 Ga geological evolution of the region. The movie starts with the accretion of volcanic island arcs on the earlier continental margin at ca. 2 Ga and deciphers later Precambrian tectonic and magmatic events. The reconstruction is based on numerous scientific articles and interpretation of geophysical data. Later Paleozoic activities and following erosion sculptured the surface which was covered with several ice sheets in Quaternary. For educational purpose, a collection of minerals and rocks at the Forestry Institute was used to create an exhibition called "Cycle of geological processes". Forestry scientists and their students are able to study the interactions of geodiversity and biodiversity and to understand ancient and modern geological processes leading to a soil formation. An aging exposition at the Museum of Erratic Boulders in NW Lithuania is being rearranged for educational purposes, to show the major rock types and their origins more clearly. A new exhibition is supplemented with computer portals presenting geological processes, geological quizzes, animations etc. Magmatism, metamorphism, sedimentation and other geological processes are demonstrated using erratic boulders brought by glaciers from Scandinavia and northern Russia. A part of the exhibition is devoted to glaciation processes and arrival of ice sheets to Lithuania. Visitors are able to examine large erratic boulder groups in a surrounding park and to enjoy beautiful environment. The exhibition also demonstrates mineral resources of Lithuania, different fossils and stones from a human body. In all cases it was recognised that a lack of geological information limits the use of geology for public outreach. Ongoing scientific research is essential in many places as well as a mediator's job for interpreting the results of highly specialised research results and to adapt them for public consumption.

Fault-Related Sanctuaries

NASA Astrophysics Data System (ADS)

Piccardi, L.

2001-12-01

Beyond the study of historical surface faulting events, this work investigates the possibility, in specific cases, of identifying pre-historical events whose memory survives in myths and legends. The myths of many famous sacred places of the ancient world contain relevant telluric references: "sacred" earthquakes, openings to the Underworld and/or chthonic dragons. Given the strong correspondence with local geological evidence, these myths may be considered as describing natural phenomena. It has been possible in this way to shed light on the geologic origin of famous myths (Piccardi, 1999, 2000 and 2001). Interdisciplinary researches reveal that the origin of several ancient sanctuaries may be linked in particular to peculiar geological phenomena observed on local active faults (like ground shaking and coseismic surface ruptures, gas and flames emissions, strong underground rumours). In many of these sanctuaries the sacred area is laid directly above the active fault. In a few cases, faulting has affected also the archaeological relics, right through the main temple (e.g. Delphi, Cnidus, Hierapolis of Phrygia). As such, the arrangement of the cult site and content of relative myths suggest that specific points along the trace of active faults have been noticed in the past and worshiped as special `sacred' places, most likely interpreted as Hades' Doors. The mythological stratification of most of these sanctuaries dates back to prehistory, and points to a common derivation from the cult of the Mother Goddess (the Lady of the Doors), which was largely widespread since at least 25000 BC. The cult itself was later reconverted into various different divinities, while the `sacred doors' of the Great Goddess and/or the dragons (offspring of Mother Earth and generally regarded as Keepers of the Doors) persisted in more recent mythologies. Piccardi L., 1999: The "Footprints" of the Archangel: Evidence of Early-Medieval Surface Faulting at Monte Sant'Angelo (Gargano, Italy). European Union of Geophysics Congress, Strasbourg, March 1999. Piccardi L., 2000: Active faulting at Delphi (Greece): seismotectonic remarks and a hypothesis for the geological environment of a myth. Geology, 28, 651-654. Piccardi L., 2001: Seismotectonic Origin of the Monster of Loch Ness. Earth System Processes, Joint Meeting of G.S.A. and G.S.L., Edinburgh, June 2001.

A 3D modeling approach to complex faults with multi-source data

NASA Astrophysics Data System (ADS)

Wu, Qiang; Xu, Hua; Zou, Xukai; Lei, Hongzhuan

2015-04-01

Fault modeling is a very important step in making an accurate and reliable 3D geological model. Typical existing methods demand enough fault data to be able to construct complex fault models, however, it is well known that the available fault data are generally sparse and undersampled. In this paper, we propose a workflow of fault modeling, which can integrate multi-source data to construct fault models. For the faults that are not modeled with these data, especially small-scale or approximately parallel with the sections, we propose the fault deduction method to infer the hanging wall and footwall lines after displacement calculation. Moreover, using the fault cutting algorithm can supplement the available fault points on the location where faults cut each other. Increasing fault points in poor sample areas can not only efficiently construct fault models, but also reduce manual intervention. By using a fault-based interpolation and remeshing the horizons, an accurate 3D geological model can be constructed. The method can naturally simulate geological structures no matter whether the available geological data are sufficient or not. A concrete example of using the method in Tangshan, China, shows that the method can be applied to broad and complex geological areas.

Geological dates and molecular rates: rapid divergence of rivers and their biotas.

PubMed

Waters, Jonathan M; Rowe, Diane L; Apte, Smita; King, Tania M; Wallis, Graham P; Anderson, Leigh; Norris, Richard J; Craw, Dave; Burridge, Christopher P

2007-04-01

We highlight a novel molecular clock calibration system based on geologically dated river reversal and river capture events. Changes in drainage pattern may effect vicariant isolation of freshwater taxa, and thus provide a predictive framework for associated phylogeographic study. As a case in point, New Zealand's Pelorus and Kaituna rivers became geologically isolated from the larger Wairau River system 70 to 130 kyr BP. We conducted mitochondrial DNA phylogeographic analyses of two unrelated freshwater-limited fish taxa native to these river systems (Gobiomorphus breviceps, n = 63; Galaxias divergens, n = 95). Phylogenetic analysis of combined control region and cytochrome b sequences yielded reciprocally monophyletic clades of Pelorus-Kaituna and Wairau haplotypes for each species. Calibrated rates of molecular change based on this freshwater vicariant event are substantially faster than traditionally accepted rates for fishes but consistent with other recent inferences based on geologically young calibration points. A survey of freshwater phylogeographic literature reveals numerous examples in which the ages of recent evolutionary events may have been substantially overestimated through the use of "accepted" calibrations. We recommend that--wherever possible--biologists should start to reassess the conclusions of such studies by using more appropriate molecular calibrations derived from recent geological events.

Evaluation of the user requirements processes for NASA terrestrial applications programs

NASA Technical Reports Server (NTRS)

1982-01-01

To support the evolution of increasingly sound user requirements definition processes that would meet the broad range of NASA's terrestrial applications planning and management needs during the 1980's, the user requirements processes as they function in the real world at the senior and middle management levels were evaluated. Special attention was given to geologic mapping and domestic crop reporting to provide insight into problems associated with the development and management of user established conventional practices and data sources. An attempt was made to identify alternative NASA user interfaces that sustain strengths, alleviate weaknesses, maximize application to multiple problems, and simplify management cognizance. Some of the alternatives are outlined and evaluated. It is recommended that NASA have an identified organizational point of focus for consolidation and oversight of the user processes.

The geology and geophysics of Mars

NASA Technical Reports Server (NTRS)

Saunders, R. S.

1976-01-01

The current state of knowledge concerning the regional geology and geophysics of Mars is summarized. Telescopic observations of the planet are reviewed, pre-Mariner models of its interior are discussed, and progress achieved with the Mariner flybys, especially that of Mariner 9, is noted. A map of the Martian geological provinces is presented to provide a summary of the surface geology and morphology. The contrast between the northern and southern hemispheres is pointed out, and the characteristic features of the surface are described in detail. The global topography of the planet is examined along with its gravitational field, gravity anomalies, and moment of inertia. The general sequence of events in Martian geological history is briefly outlined.

Spectral analysis and filtering techniques in digital spatial data processing

USGS Publications Warehouse

Pan, Jeng-Jong

1989-01-01

A filter toolbox has been developed at the EROS Data Center, US Geological Survey, for retrieving or removing specified frequency information from two-dimensional digital spatial data. This filter toolbox provides capabilities to compute the power spectrum of a given data and to design various filters in the frequency domain. Three types of filters are available in the toolbox: point filter, line filter, and area filter. Both the point and line filters employ Gaussian-type notch filters, and the area filter includes the capabilities to perform high-pass, band-pass, low-pass, and wedge filtering techniques. These filters are applied for analyzing satellite multispectral scanner data, airborne visible and infrared imaging spectrometer (AVIRIS) data, gravity data, and the digital elevation models (DEM) data. -from Author

Are fractal dimensions of the spatial distribution of mineral deposits meaningful?

USGS Publications Warehouse

Raines, G.L.

2008-01-01

It has been proposed that the spatial distribution of mineral deposits is bifractal. An implication of this property is that the number of deposits in a permissive area is a function of the shape of the area. This is because the fractal density functions of deposits are dependent on the distance from known deposits. A long thin permissive area with most of the deposits in one end, such as the Alaskan porphyry permissive area, has a major portion of the area far from known deposits and consequently a low density of deposits associated with most of the permissive area. On the other hand, a more equi-dimensioned permissive area, such as the Arizona porphyry permissive area, has a more uniform density of deposits. Another implication of the fractal distribution is that the Poisson assumption typically used for estimating deposit numbers is invalid. Based on datasets of mineral deposits classified by type as inputs, the distributions of many different deposit types are found to have characteristically two fractal dimensions over separate non-overlapping spatial scales in the range of 5-1000 km. In particular, one typically observes a local dimension at spatial scales less than 30-60 km, and a regional dimension at larger spatial scales. The deposit type, geologic setting, and sample size influence the fractal dimensions. The consequence of the geologic setting can be diminished by using deposits classified by type. The crossover point between the two fractal domains is proportional to the median size of the deposit type. A plot of the crossover points for porphyry copper deposits from different geologic domains against median deposit sizes defines linear relationships and identifies regions that are significantly underexplored. Plots of the fractal dimension can also be used to define density functions from which the number of undiscovered deposits can be estimated. This density function is only dependent on the distribution of deposits and is independent of the definition of the permissive area. Density functions for porphyry copper deposits appear to be significantly different for regions in the Andes, Mexico, United States, and western Canada. Consequently, depending on which regional density function is used, quite different estimates of numbers of undiscovered deposits can be obtained. These fractal properties suggest that geologic studies based on mapping at scales of 1:24,000 to 1:100,000 may not recognize processes that are important in the formation of mineral deposits at scales larger than the crossover points at 30-60 km. ?? 2008 International Association for Mathematical Geology.

Topographic attributes as a guide for automated detection or highlighting of geological features

NASA Astrophysics Data System (ADS)

Viseur, Sophie; Le Men, Thibaud; Guglielmi, Yves

2015-04-01

Photogrammetry or LIDAR technology combined with photography allow geoscientists to obtain 3D high-resolution numerical representations of outcrops, generally termed as Digital Outcrop Models (DOM). For over a decade, these 3D numerical outcrops serve as support for precise and accurate interpretations of geological features such as fracture traces or plans, strata, facies mapping, etc. These interpretations have the benefit to be directly georeferenced and embedded into the 3D space. They are then easily integrated into GIS or geomodeler softwares for modelling in 3D the subsurface geological structures. However, numerical outcrops generally represent huge data sets that are heavy to manipulate and hence to interpret. This may be particularly tedious as soon as several scales of geological features must be investigated or as geological features are very dense and imbricated. Automated tools for interpreting geological features from DOMs would be then a significant help to process these kinds of data. Such technologies are commonly used for interpreting seismic or medical data. However, it may be noticed that even if many efforts have been devoted to easily and accurately acquire 3D topographic point clouds and photos and to visualize accurate 3D textured DOMs, few attentions have been paid to the development of algorithms for automated detection of the geological structures from DOMs. The automatic detection of objects on numerical data generally assumes that signals or attributes computed from this data allows the recognition of the targeted object boundaries. The first step consists then in defining attributes that highlight the objects or their boundaries. For DOM interpretations, some authors proposed to use differential operators computed on the surface such as normal or curvatures. These methods generally extract polylines corresponding to fracture traces or bed limits. Other approaches rely on the PCA technology to segregate different topographic plans. This approach assume that structural or sedimentary features coincide with topographic surface parts. In this work, several topographic attributes are proposed to highlight geological features on outcrops. Among them, differential operators are used but also combined and processed to display particular topographic shapes. Moreover, two kinds of attributes are used: unsupervised and supervised attributes. The supervised attributes integrate an a priori knowledge about the objects to extract (e.g.: a preferential orientation of fracture surfaces, etc.). This strategy may be compared to the one used for seismic interpretation. Indeed, many seismic attributes have been proposed to highlight geological structures hardly observable due to data noise. The same issue exist with topographic data: plants, erosions, etc. generate noise that make interpretation sometimes hard. The proposed approach has been applied on real case studies to show how it could help the interpretation of geological features. The obtained 'topographic attributes' are shown and discussed.

77 FR 26048 - Notice of Permit Applications Received Under the Antarctic Conservation Act of 1978 (Pub. L. 95-541)

Federal Register 2010, 2011, 2012, 2013, 2014

2012-05-02

...--Cape Adare; ASPA 160--Cape Geology; and, ASPA 171--Narebski Point. Access to these sites will be on an... Shirreff; ASPA 150--Ardley Island; ASPA 158--Cape Adare; ASPA 160--Cape Geology; and, ASPA 171-- Narebski...

Geologic Map of the Point Lay Quadrangle, Alaska

USGS Publications Warehouse

Mull, Charles G.; Houseknecht, David W.; Pessel, G.H.; Garrity, Christopher P.

2008-01-01

This map is a product of the USGS Digital Geologic Maps of Northern Alaska project, which captures in digital format quadrangles across the entire width of northern Alaska. Sources include geologic maps previously published in hardcopy format and recent updates and revisions based on field mapping by the Alaska Department of Natural Resources, Division of Geological and Geophysical Surveys and Division of Oil and Gas, and the U.S. Geological Survey. Individual quadrangles are digitized at either 1:125,000 or 1:250,000 depending on the resolution of source maps. The project objective is to produce a set of digital geologic maps with uniform stratigraphic nomenclature and structural annotation, and publish those maps electronically. The paper version of this map is available for purchase from the USGS Store.

Groundwater in geologic processes, 2nd edition

USGS Publications Warehouse

Ingebritsen, Steven E.; Sanford, Ward E.; Neuzil, Christopher E.

2006-01-01

Interest in the role of Groundwater in Geologic Processes has increased steadily over the past few decades. Hydrogeologists and geologists are now actively exploring the role of groundwater and other subsurface fluids in such fundamental geologic processes as crustal heat transfer, ore deposition, hydrocarbon migration, earthquakes, tectonic deformation, diagenesis, and metamorphism.Groundwater in Geologic Processes is the first comprehensive treatment of this body of inquiry. Chapters 1 to 4 develop the basic theories of groundwater motion, hydromechanics, solute transport, and heat transport. Chapter 5 applies these theories to regional groundwater flow systems in a generic sense, and Chapters 6 to 13 focus on particular geologic processes and environments. Relative to the first edition of Groundwater in Geologic Processes , this second edition includes a much more comprehensive treatment of hydromechanics (the coupling of groundwater flow and deformation). It also includes new chapters on "compaction and diagenesis," "metamorphism," and "subsea hydrogeology." Finally, it takes advantage of the substantial body of published research that has appeared since the first edition in 1998. The systematic presentation of theory and application, and the problem sets that conclude each chapter, make this book ideal for undergraduate- and graduate-level geology courses (assuming that the students have some background in calculus and introductory chemistry). It also serves as an invaluable reference for researchers and other professionals in the field

Topographic lidar survey of the Chandeleur Islands, Louisiana, February 6, 2012

USGS Publications Warehouse

Guy, Kristy K.; Plant, Nathaniel G.; Bonisteel-Cormier, Jamie M.

2014-01-01

This Data Series Report contains lidar elevation data collected February 6, 2012, for Chandeleur Islands, Louisiana. Point cloud data in lidar data exchange format (LAS) and bare earth digital elevation models (DEMs) in ERDAS Imagine raster format (IMG) are available as downloadable files. The point cloud data—data points described in three dimensions—were processed to extract bare earth data; therefore, the point cloud data are organized into the following classes: 1– and 17–unclassified, 2–ground, 9–water, and 10–breakline proximity. Digital Aerial Solutions, LLC, (DAS) was contracted by the U.S. Geological Survey (USGS) to collect and process these data. The lidar data were acquired at a horizontal spacing (or nominal pulse spacing) of 0.5 meters (m) or less. The USGS conducted two ground surveys in small areas on the Chandeleur Islands on February 5, 2012. DAS calculated a root mean square error (RMSEz) of 0.034 m by comparing the USGS ground survey point data to triangulated irregular network (TIN) models built from the lidar elevation data. This lidar survey was conducted to document the topography and topographic change of the Chandeleur Islands. The survey supports detailed studies of Louisiana, Mississippi and Alabama barrier islands that resolve annual and episodic changes in beaches, berms and dunes associated with processes driven by storms, sea-level rise, and even human restoration activities. These lidar data are available to Federal, State and local governments, emergency-response officials, resource managers, and the general public.

The exploration and prevention of mine water invasion in Feicheng area based on RS

NASA Astrophysics Data System (ADS)

Zheng, Yong-Guo; Wang, Ping; Ting, He

2004-10-01

Recently, when the ninth and tenth were mined in Feiching city mining area, several mine wells occurred on water invasion. Based on systematic interpretation of TMimages in Fei Cheng mining area, authors find that there are five zones of NS trending lineaments, which nearly distribute in radial in TM images. Image processing can be divided into three types, they are spectrum enhancement, spatial filtering and data fusion, the useful methods in this area are auto-adaptive enhancement, density slicing and K-L transform. With ninth and tenth seam coals mined, three mines of east area have broken out serious accidents of water. Statistical materials and the test of water quality drawing off five limestone indicates water-yielding zone near NS, NNE, and NW trending faults, or near intersection point of its and others. In order to solve the problem, using remote sensing and other techniques, we try to find some influential factors on mine flow. Further analyses, such as, the exploration of geology on earth, and microcosmic from rock slice, the authors find that there are some reasons which lead to water invasion such as geological structure, karsts, index and so on, in which the main reason might be north-south deep fracture which is the pathway of well water's distribution, migration and recharge of mine water. There being more complicate geologic structure in the west of mine area, at last, with RS authors point out important zone of mine water invasion which the prevention-control of hazards from mine water and some measures to avoid water blast in future.

Long-range laser scanning and 3D imaging for the Gneiss quarries survey

NASA Astrophysics Data System (ADS)

Schenker, Filippo Luca; Spataro, Alessio; Pozzoni, Maurizio; Ambrosi, Christian; Cannata, Massimiliano; Günther, Felix; Corboud, Federico

2016-04-01

In Canton Ticino (Southern Switzerland), the exploitation of natural stone, mostly gneisses, is an important activity of valley's economies. Nowadays, these economic activities are menaced by (i) the exploitation costs related to geological phenomena such as fractures, faults and heterogeneous rocks that hinder the processing of the stone product, (ii) continuously changing demand because of the evolving natural stone fashion and (iii) increasing administrative limits and rules acting to protect the environment. Therefore, the sustainable development of the sector for the next decades needs new and effective strategies to regulate and plan the quarries. A fundamental step in this process is the building of a 3D geological model of the quarries to constrain the volume of commercial natural stone and the volume of waste. In this context, we conducted Terrestrial Laser Scanning surveys of the quarries in the Maggia Valley to obtain a detailed 3D topography onto which the geological units were mapped. The topographic 3D model was obtained with a long-range laser scanning Riegl VZ4000 that can measure from up to 4 km of distance with a speed of 147,000 points per second. It operates with the new V-line technology, which defines the surface relief by sensing differentiated signals (echoes), even in the presence of obstacles such as vegetation. Depending on the esthetics of the gneisses, we defined seven types of natural stones that, together with faults and joints, were mapped onto the 3D models of the exploitation sites. According to the orientation of the geological limits and structures, we projected the different rock units and fractures into the excavation front. This way, we obtained a 3D geological model from which we can quantitatively estimate the volume of the seven different natural stones (with different commercial value) and waste (with low commercial value). To verify the 3D geological models and to quantify exploited rock and waste volumes the same procedure will be repeated after ca. 6 months. Finally, these 3D geological models can be useful to (i) decrease the exploitation costs because they yield the extraction potential of quarry, (ii) become more efficient in the exploitation and more dynamic in the market because they permit better planning and (iii) decrease the waste by limiting the excavation in regions with low-quality rocks.

Incorporation of water-use summaries into the StreamStats web application for Maryland

USGS Publications Warehouse

Ries, Kernell G.; Horn, Marilee A.; Nardi, Mark R.; Tessler, Steven

2010-01-01

Approximately 25,000 new households and thousands of new jobs will be established in an area that extends from southwest to northeast of Baltimore, Maryland, as a result of the Federal Base Realignment and Closure (BRAC) process, with consequent new demands on the water resources of the area. The U.S. Geological Survey, in cooperation with the Maryland Department of the Environment, has extended the area of implementation and added functionality to an existing map-based Web application named StreamStats to provide an improved tool for planning and managing the water resources in the BRAC-affected areas. StreamStats previously was implemented for only a small area surrounding Baltimore, Maryland, and it was extended to cover all BRAC-affected areas. StreamStats could provide previously published streamflow statistics, such as the 1-percent probability flood and the 7-day, 10-year low flow, for U.S. Geological Survey data-collection stations and estimates of streamflow statistics for any user-selected point on a stream within the implemented area. The application was modified for this study to also provide summaries of water withdrawals and discharges upstream from any user-selected point on a stream. This new functionality was made possible by creating a Web service that accepts a drainage-basin delineation from StreamStats, overlays it on a spatial layer of water withdrawal and discharge points, extracts the water-use data for the identified points, and sends it back to StreamStats, where it is summarized for the user. The underlying water-use data were extracted from the U.S. Geological Survey's Site-Specific Water-Use Database System (SWUDS) and placed into a Microsoft Access database that was created for this study for easy linkage to the Web service and StreamStats. This linkage of StreamStats with water-use information from SWUDS should enable Maryland regulators and planners to make more informed decisions on the use of water resources in the BRAC area, and the technology should be transferrable to other geographic areas.

Teaching Introductory Geology by a Paradigm, Process and Product Approach

NASA Astrophysics Data System (ADS)

Reams, M.

2008-12-01

Students in introductory geology courses can easily become lost in the minutiae of terms and seemingly random ideas and theories. One way to avoid this and provide a holistic picture of each major subject area in a beginning course is to introduce, at the start of each section, the ruling paradigm, the processes, and resultant products. By use of these three Ps: paradigm, processes, and products, students have a reasonably complete picture of the subject area. If they knew nothing more than this simple construct, they would have an excellent perspective of the subject area. This provides a jumping off point for the instructor to develop the details. The three Ps can make course construction much more straightforward and complete. Students benefit since they have a clearer idea of what the subject is about and its importance. Retention may be improved and carryover to advanced courses may be aided. For faculty, the use of these three P's makes organizing a course more straightforward. Additionally, the instructor benefits include: 1. The main points are clearly stated, thus avoiding the problem of not covering the essential concepts. 2. The course topics hold together, pedagogically. There is significant opportunity for continuity of thought. 3. An outline is developed that is easily analyzed for holes or omissions. 4. A course emerges with a balance of topics, permitting appropriate time to be devoted to significant subject matter. 5. If a course is shared between faculty or passes from one faculty to another by semester or quarter, there is greater assurance that topics and concepts everyone agrees on can be adequately covered. 6. There is less guesswork involved in planning a course. New faculty have an approach that will make sense and allow them to feel less awash and more focused. In summary, taking time to construct a course utilizing the important paradigms, processes, and products can provide significant benefits to the instructor and the student. Material can be presented in a more coherent manner and allow students the opportunity to grasp essential concepts from the very beginning. There are fewer potential surprises and greater likelihood that key ideas can be retained, as opposed to retaining isolated fragments of information. Illustrations from over a decade of use in an introductory Physical and Historical Geology course will be presented.

An Interactive Map Viewer for the Urban Geology of Ottawa (Canada): an Example of Web Publishing

NASA Astrophysics Data System (ADS)

Giroux, D.; Bélanger, R.

2003-04-01

Developed by the Terrain Sciences Division (TSD) of the Geological Survey of Canada (GSC), an interactive map viewer, called GEOSERV (www.geoserv.org), is now available on the Internet. The purpose of this viewer is to provide engineers, planners, decision makers, and the general public with the geoscience information required for sound regional planning in densely populated areas, such as Canada's national capital, Ottawa (Ontario). Urban geology studies rely on diverse branches of earth sciences such as hydrology, engineering geology, geochemistry, stratigraphy, and geomorphology in order to build a three-dimensional model of the character of the land and to explain the geological processes involved in the dynamic equilibrium of the local environment. Over the past few years, TSD has compiled geoscientific information derived from various sources such as borehole logs, geological maps, hydrological reports and digital elevation models, compiled it in digital format and stored it in georeferenced databases in the form of point, linear, and polygonal data. This information constitutes the geoscience knowledge base which is then processed by Geographic Information Systems (GIS) to integrate the various sources of information and produce derived graphics, maps and models describing the geological infrastructure and response of the geological environment to human activities. Urban Geology of Canada's National Capital Area is a pilot project aiming at developing approaches, methodologies and standards that can be applied to other major urban centres of the country, while providing the geoscience knowledge required for sound regional planning and environmental protection of the National Capital Area. Based on an application developed by ESRI (Environmental System Research Institute), namely ArcIMS, the TSD has customized this web application to give free access to geoscience information of the Ottawa/Outaouais (Ontario/Québec) area including geological history, subsurface database, stratigraphy, bedrock, surficial and hydrogeology maps, and a few others. At present, each layer of geospatial information in TSD's interactive map viewer is connected to simple independent flat files (i.e. shapefiles), but it is also possible to connect GEOSERV to other types of (relational) databases (e.g. Microsoft SQL Server, Oracle). Frequent updating of shapefiles could be a cumbersome task, when new records are added, since we have to completely rebuild the updated shapefiles. However, new attributes can be added to existing shapefiles easily. At present, the updating process can not be done on-the-fly; we must stop and restart the updated MapService if one of its shapefiles is changed. The public can access seventeen MapServices that provide interactive tools that users can use to query, zoom, pan, select, and so on, or print the map displayed on their monitor. The map viewer is light-weight as it uses HTML and Javascript, so end users do not have to download and install any plug-ins. A free CD and a companion web site were also developed to give access to complementary information, like high resolution raster maps and reports. Some of the datasets are available free of charge, on-line.

Publications - GMC 36 | Alaska Division of Geological & Geophysical Surveys

Science.gov Websites

the Atigaru Point #1, Drew Point #1, Kavearak Point #32-25, Simpson Lagoon #32-14, W. T. Foran #1 AMOCO, 1982, Mineral analysis of core chips from the Sadlerochit sandstone of the Atigaru Point #1, Drew Point #1, Kavearak Point #32-25, Simpson Lagoon #32-14, W. T. Foran #1 wells: Alaska Division of

Finite element code FENIA verification and application for 3D modelling of thermal state of radioactive waste deep geological repository

NASA Astrophysics Data System (ADS)

Butov, R. A.; Drobyshevsky, N. I.; Moiseenko, E. V.; Tokarev, U. N.

2017-11-01

The verification of the FENIA finite element code on some problems and an example of its application are presented in the paper. The code is being developing for 3D modelling of thermal, mechanical and hydrodynamical (THM) problems related to the functioning of deep geological repositories. Verification of the code for two analytical problems has been performed. The first one is point heat source with exponential heat decrease, the second one - linear heat source with similar behavior. Analytical solutions have been obtained by the authors. The problems have been chosen because they reflect the processes influencing the thermal state of deep geological repository of radioactive waste. Verification was performed for several meshes with different resolution. Good convergence between analytical and numerical solutions was achieved. The application of the FENIA code is illustrated by 3D modelling of thermal state of a prototypic deep geological repository of radioactive waste. The repository is designed for disposal of radioactive waste in a rock at depth of several hundred meters with no intention of later retrieval. Vitrified radioactive waste is placed in the containers, which are placed in vertical boreholes. The residual decay heat of radioactive waste leads to containers, engineered safety barriers and host rock heating. Maximum temperatures and corresponding times of their establishment have been determined.

Topogrid Derived 10 Meter Resolution Digital Elevation Model of the Shenandoah National Park and Surrounding Region, Virginia

USGS Publications Warehouse

Chirico, Peter G.; Tanner, Seth D.

2004-01-01

Explanation The purpose of developing a new 10m resolution DEM of the Shenandoah National Park Region was to more accurately depict geologic structure, surfical geology, and landforms of the Shenandoah National Park Region in preparation for automated landform classification. Previously, only a 30m resolution DEM was available through the National Elevation Dataset (NED). During production of the Shenandoah10m DEM of the Park the Geography Discipline of the USGS completed a revised 10m DEM to be included into the NED. However, different methodologies were used to produce the two similar DEMs. The ANUDEM algorithm was used to develop the Shenadoah DEM data. This algorithm allows for the inclusion of contours, streams, rivers, lake and water body polygons as well as spot height data to control the elevation model. A statistical analysis using over 800 National Geodetic Survey (NGS) first and second order vertical control points reveals that the Shenandoah10m DEM, produced as a part of the Appalachian Blue Ridge Landscape project, has a vertical accuracy of ?4.87 meters. The metadata for the 10m NED data reports a vertical accuracy of ?7m. A table listing the NGS control points, the elevation comparison, and the RMSE for the Shenandoah10m DEM is provided. The process of automated terrain classification involves developing statistical signatures from the DEM for each type of surficial deposit and landform type. The signature will be a measure of several characteristics derived from the elevation data including slope, aspect, planform curvature, and profile curvature. The quality of the DEM is of critical importance when extracting terrain signatures. The highest possible horizontal and vertical accuracy is required. The more accurate Shenandoah 10m DEM can now be analyzed and integrated with the geologic observations to yield statistical correlations between the two in the development of landform and surface geology mapping projects.

Reconciling geodetic and geologic slip rates along the Carboneras fault in the Betics: work in progress

NASA Astrophysics Data System (ADS)

Khazaradze, Giorgi; López, Robert; Pallàs, Raimon; Bordonau, Jaume; Masana, Eulàlia

2017-04-01

As part of the recently initiated research project we are in the process of studying in detail the geodynamic behavior of the Carboneras fault in the SE Betics in Spain. Specifically, we plan to quantify the geodetic and geologic slip rates for the onland section of the fault, as well as getting some insight on the state of locking of the fault. As a result of our previous GPS observations, we have been able to illustrate the continuing tectonic activity of the Carboneras fault, expressed mainly as a left-lateral strike slip motion of 1.3±0.2 mm/yr (Echeverria et al., 2015). To reveal how the deformation is partitioned between different structures, 3 new continuous GPS points are being established along fault-perpendicular profile. In addition, since summer 2016, we have conducted surveys of the nearby CuaTeNeo and IGN Regente points. We have also established and measured several new geodetic points in the vicinity of the fault, with the aim of increasing the spatial coverage around it. The above-mentioned geodetic, short-term, slip rates are in surprisingly good agreement with the estimates of geologic slip rates based on paleoseismic studies, which indicate a minimum strike-slip rate of 1.31 mm/yr and a dip-slip rate of 0.05 mm/yr since 110.3 ka (Moreno et al. 2015). In order to increase the paleoseismic event database, 6 new sites have been identified along the fault, where further paleoseismic trenching surveys will be conducted within the coming years. These new data, combined with the findings of the recent geomorphological study of river offsets (Ferrater, 2016) and new GPS observations, should significantly improve the reliability of the existent deformation data and as a consequence, contribute to better understanding the seismic hazard posed by the Carbonears fault in the SE Betics. This work is funded by the project PREVENT (CGL2015-66263-R), financed by the Ministry of Economy, Industry and Competitiveness.

Facets : a Cloudcompare Plugin to Extract Geological Planes from Unstructured 3d Point Clouds

NASA Astrophysics Data System (ADS)

Dewez, T. J. B.; Girardeau-Montaut, D.; Allanic, C.; Rohmer, J.

2016-06-01

Geological planar facets (stratification, fault, joint…) are key features to unravel the tectonic history of rock outcrop or appreciate the stability of a hazardous rock cliff. Measuring their spatial attitude (dip and strike) is generally performed by hand with a compass/clinometer, which is time consuming, requires some degree of censoring (i.e. refusing to measure some features judged unimportant at the time), is not always possible for fractures higher up on the outcrop and is somewhat hazardous. 3D virtual geological outcrop hold the potential to alleviate these issues. Efficiently segmenting massive 3D point clouds into individual planar facets, inside a convenient software environment was lacking. FACETS is a dedicated plugin within CloudCompare v2.6.2 (http://cloudcompare.org/ ) implemented to perform planar facet extraction, calculate their dip and dip direction (i.e. azimuth of steepest decent) and report the extracted data in interactive stereograms. Two algorithms perform the segmentation: Kd-Tree and Fast Marching. Both divide the point cloud into sub-cells, then compute elementary planar objects and aggregate them progressively according to a planeity threshold into polygons. The boundaries of the polygons are adjusted around segmented points with a tension parameter, and the facet polygons can be exported as 3D polygon shapefiles towards third party GIS software or simply as ASCII comma separated files. One of the great features of FACETS is the capability to explore planar objects but also 3D points with normals with the stereogram tool. Poles can be readily displayed, queried and manually segmented interactively. The plugin blends seamlessly into CloudCompare to leverage all its other 3D point cloud manipulation features. A demonstration of the tool is presented to illustrate these different features. While designed for geological applications, FACETS could be more widely applied to any planar objects.

D Geological Framework Models as a Teaching Aid for Geoscience

NASA Astrophysics Data System (ADS)

Kessler, H.; Ward, E.; Geological ModelsTeaching Project Team

2010-12-01

3D geological models have great potential as a resource for universities when teaching foundation geological concepts as it allows the student to visualise and interrogate UK geology. They are especially useful when dealing with the conversion of 2D field, map and GIS outputs into three dimensional geological units, which is a common problem for all students of geology. Today’s earth science students use a variety of skills and processes during their learning experience including the application of schema’s, spatial thinking, image construction, detecting patterns, memorising figures, mental manipulation and interpretation, making predictions and deducing the orientation of themselves and the rocks. 3D geological models can reinforce spatial thinking strategies and encourage students to think about processes and properties, in turn helping the student to recognise pre-learnt geological principles in the field and to convert what they see at the surface into a picture of what is going on at depth. Learning issues faced by students may also be encountered by experts, policy managers, and stakeholders when dealing with environmental problems. Therefore educational research of student learning in earth science may also improve environmental decision making. 3D geological framework models enhance the learning of Geosciences because they: ● enable a student to observe, manipulate and interpret geology; in particular the models instantly convert two-dimensional geology (maps, boreholes and cross-sections) into three dimensions which is a notoriously difficult geospatial skill to acquire. ● can be orientated to whatever the user finds comfortable and most aids recognition and interpretation. ● can be used either to teach geosciences to complete beginners or add to experienced students body of knowledge (whatever point that may be at). Models could therefore be packaged as a complete educational journey or students and tutor can select certain areas of the model or educational material to incorporate it into an existing area of the syllabus such as a field trip, project work or a certain taxing geological concept such as dip and strike. ● can easily be utilised by students unable to attend university conventionally (illness or disability), distance learning students or for extra curricular activities and continuing professional development courses. ● can be used repeatedly and in such a way as to continually build on geoscience aspects - this practice will improve the student’s geospatial skills. ● can be compared with that seen directly in the field which aids the student in recognising particular patterns or sequences. It also demonstrates how different and complex geology looks in the field and thus how important it is not to rely on models alone. ● are interactive and the accompanying educational material is engaging, dealing with authentic, contemporary scientific problems meaning the student will have to ask questions, think critically and solve problems. ● can often be more practical and better financial alternatives to some teaching methods currently employed. ● incorporate strategies where students first explore, are then introduced to terminology and concepts, finally students apply their knowledge to different, but related problems. This can be further reinforced and explored with fellow students.

Geologic map of the Vashon 7.5' quadrangle and selected areas, King County, Washington

USGS Publications Warehouse

Booth, Derek B.; Troost, Kathy Goetz; Tabor, Rowland W.

2015-01-01

This map, the Vashon quadrangle and selected adjacent areas, encompasses most of Vashon Island, Maury Island, and Three Tree Point in the south-central Puget Sound. One small area in the Vashon quadrangle on the east side of Puget Sound is excluded from this map but included on the adjacent Seattle quadrangle (Booth and others, 2005). The map displays a wide variety of surficial geologic deposits, which reflect many geologic environments and processes. Multiple ice-sheet glaciations and intervening nonglacial intervals have constructed a complexly layered sequence of deposits that underlie both islands to a depth of more than 300 m below sea level. These deposits not only record glacial and nonglacial history but also control the flow and availability of ground water, determine the susceptibility of the slopes to landslides, and provide economic reserves of sand and gravel. The islands are surrounded by channels of Puget Sound, some as deep as the islands are high (>600 ft (~200 m)). The shorelines provide many kilometers of well-exposed coastal outcrops that reveal abundant lithologic and stratigraphic details not ordinarily displayed in the heavily vegetated Puget Lowland.

High-resolution topographic, bathymetric, and oceanographic data for the Pleasure Point Area, Santa Cruz County, California: 2005-2007

USGS Publications Warehouse

Storlazzi, Curt D.; Barnard, Patrick L.; Collins, Brian D.; Finlayson, David P.; Golden, Nadine E.; Hatcher, Gerry A.; Kayen, Robert E.; Ruggiero, Peter

2007-01-01

The County of Santa Cruz Department of Public Works and the County of Santa Cruz Redevelopment Agency requested the U.S. Geological Survey (USGS) Western Coastal and Marine Geology Team (WCMG) to provide baseline geologic and oceanographic information on the coast and inner shelf at Pleasure Point, Santa Cruz County, California. The rationale for this proposed work is a need to better understand the environmental consequences of a proposed bluff stabilization project on the beach, the nearshore and the surf at Pleasure Point, Santa Cruz County, California. To meet these information needs, the USGS-WCMG Team collected baseline scientific information on the morphology and waves at Pleasure Point. This study provided high-resolution topography of the coastal bluffs and bathymetry of the inner shelf off East Cliff Drive between 32nd Avenue and 41st Avenue. The spatial and temporal variation in waves and their breaking patterns at the study site were documented. Although this project did not actively investigate the impacts of the proposed bluff stabilization project, these data provide the baseline information required for future studies directed toward predicting the impacts of stabilization on the sea cliffs, beach and nearshore sediment profiles, natural rock reef structures, and offshore habitats and resources. They also provide a basis for calculating potential changes to wave transformations into the shore at Pleasure Point.

Citizen-Scientist Digitization of a Complex Geologic Map of the McDowell Mountains (Scottsdale, Arizona).

NASA Astrophysics Data System (ADS)

Gruber, D.; Skotnicki, S.; Gootee, B.

2016-12-01

The work of citizen scientists has become very important to researchers doing field work and internet-based projects but has not been widely utilized in digital mapping. The McDowell Mountains - located in Scottsdale, Arizona, at the edge of the basin-and-range province and protected as part of the McDowell Sonoran Preserve - are geologically complex. Until recently, no comprehensive geologic survey of the entire range had been done. Over the last 9 years geologist Steven Skotnicki spent 2000 hours mapping the complex geology of the range. His work, born of personal interest and partially supported by the McDowell Sonoran Conservancy, resulted in highly detailed hand-drawn survey maps. Dr. Skotnicki's work provides important new information and raises interesting research questions about the geology of this range. Citizen scientists of the McDowell Sonoran Conservancy Field Institute digitized Dr. Skotnicki's maps. A team of 10 volunteers, trained in ArcMap digitization techniques and led by volunteer project leader Daniel Gruber, performed the digitization work. Technical oversight of mapping using ArcMap, including provision of USGS-based mapping toolbars, was provided by Arizona Geological Survey (AZGS) research geologist Brian Gootee. The map digitization process identified and helped resolve a number of mapping questions. The citizen-scientist team spent 900 hours on training, digitization, quality checking, and project coordination with support and review by Skotnicki and Gootee. The resulting digital map has approximately 3000 polygons, 3000 points, and 86 map units with complete metadata and unit descriptions. The finished map is available online through AZGS and can be accessed in the field on mobile devices. User location is shown on the map and metadata can be viewed with a tap. The citizen scientist map digitization team has made this important geologic information available to the public and accessible to other researchers quickly and efficiently.

Visualizations and Mental Models - The Educational Implications of GEOWALL

NASA Astrophysics Data System (ADS)

Rapp, D.; Kendeou, P.

2003-12-01

Work in the earth sciences has outlined many of the faulty beliefs that students possess concerning particular geological systems and processes. Evidence from educational and cognitive psychology has demonstrated that students often have difficulty overcoming their na‹ve beliefs about science. Prior knowledge is often remarkably resistant to change, particularly when students' existing mental models for geological principles may be faulty or inaccurate. Figuring out how to help students revise their mental models to include appropriate information is a major challenge. Up until this point, research has tended to focus on whether 2-dimensional computer visualizations are useful tools for helping students develop scientifically correct models. Research suggests that when students are given the opportunity to use dynamic computer-based visualizations, they are more likely to recall the learned information, and are more likely to transfer that knowledge to novel settings. Unfortunately, 2-dimensional visualization systems are often inadequate representations of the material that educators would like students to learn. For example, a 2-dimensional image of the Earth's surface does not adequately convey particular features that are critical for visualizing the geological environment. This may limit the models that students can construct following these visualizations. GEOWALL is a stereo projection system that has attempted to address this issue. It can display multidimensional static geologic images and dynamic geologic animations in a 3-dimensional format. Our current research examines whether multidimensional visualization systems such as GEOWALL may facilitate learning by helping students to develop more complex mental models. This talk will address some of the cognitive issues that influence the construction of mental models, and the difficulty of updating existing mental models. We will also discuss our current work that seeks to examine whether GEOWALL is an effective tool for helping students to learn geological information (and potentially restructure their na‹ve conceptions of geologic principles).

The USGS role in mapping the nation's submerged lands

USGS Publications Warehouse

Schwab, Bill; Haines, John

2004-01-01

The seabed provides habitat for a diverse marine life having commercial, recreational, and intrinsic value. The habitat value of the seabed is largely a function of the geological structure and related geological, biological, oceanologic, and geochemical processes. Of equal importance, the nation's submerged lands contain energy and mineral resources and are utilized for the siting of offshore infrastructure and waste disposal. Seabed character and processes influence the safety and viability of offshore operations. Seabed and subseabed characterization is a prerequisite for the assessment, protection, and utilization of both living and non-living marine resources. A comprehensive program to characterize and understand the nation's submerged lands requires scientific expertise in the fields of geology, biology, hydrography, and oceanography. The U.S. Geological Survey (USGS) has long experience as the Federal agency charged with conducting geologic research and mapping in both coastal and offshore regions. The USGS Coastal and Marine Geology Program (CMGP) leads the nation in expertise related to characterization of seabed and subseabed geology, geological processes, seabed dynamics, and (in collaboration with the National Oceanic and Atmospheric Administration (NOAA) and international partners) habitat geoscience. Numerous USGS studies show that sea-floor geology and processes determine the character and distribution of biological habitats, control coastal evolution, influence the coastal response to storm events and human alterations, and determine the occurrence and concentration of natural resources.

Reports of planetary geology program, 1983

NASA Technical Reports Server (NTRS)

Holt, H. E. (Compiler)

1984-01-01

Several areas of the Planetary Geology Program were addressed including outer solar system satellites, asteroids, comets, Venus, cratering processes and landform development, volcanic processes, aeolian processes, fluvial processes, periglacial and permafrost processes, geomorphology, remote sensing, tectonics and stratigraphy, and mapping.

Assessment of effectiveness of geologic isolation systems. Geologic-simulation model for a hypothetical site in the Columbia Plateau. Volume 2: results

DOE Office of Scientific and Technical Information (OSTI.GOV)

Foley, M.G.; Petrie, G.M.; Baldwin, A.J.

1982-06-01

This report contains the input data and computer results for the Geologic Simulation Model. This model is described in detail in the following report: Petrie, G.M., et. al. 1981. Geologic Simulation Model for a Hypothetical Site in the Columbia Plateau, Pacific Northwest Laboratory, Richland, Washington. The Geologic Simulation Model is a quasi-deterministic process-response model which simulates, for a million years into the future, the development of the geologic and hydrologic systems of the ground-water basin containing the Pasco Basin. Effects of natural processes on the ground-water hydrologic system are modeled principally by rate equations. The combined effects and synergistic interactionsmore » of different processes are approximated by linear superposition of their effects during discrete time intervals in a stepwise-integration approach.« less

Geological Data Preservation Program Receives Bipartisan Support

NASA Astrophysics Data System (ADS)

Showstack, Randy

2014-09-01

More than 22 million vertical feet of geologic cores and cuttings fill the Kentucky Geological Survey's Well Sample and Core Library in Lexington. The materials are from at least 22,000 sites within Kentucky—including collections from oil and gas exploration operations, coal and other mining companies, highway construction projects, environmental studies, and federal facilities such as Fort Knox—and they are straining the 15-year-old facility to the point where there is no room to keep everything, according to geologist Patrick Gooding, the library manager.

Geologic map of the west-central Buffalo National River region, northern Arkansas

USGS Publications Warehouse

Hudson, Mark R.; Turner, Kenzie J.

2014-01-01

This report provides a geologic map database of the map area that improves understanding of the regional geologic framework and its influence on the regional groundwater flow system. Furthermore, additional edits were made to the Ponca and Jasper quadrangles in the following ways: new control points on important contacts were obtained using modern GPS; recent higher resolution elevation data allowed further control on placement of contacts; some new contacts were added, in particular the contact separating the upper and lower Everton Formation.

Recent Geologic Mapping Results for the Polar Regions of Mars

NASA Technical Reports Server (NTRS)

tanaka, K. L.; Kolb, E. J.

2008-01-01

The polar regions of Mars include the densest data coverage for the planet because of the polar orbits of MGS, ODY, and MEX. Because the geology of the polar plateaus has been among the most dynamic on the planet in recent geologic time, the data enable the most detailed and complex geologic investigations of any regions on Mars, superseding previous, even recent, mapping efforts [e.g., 1-3]. Geologic mapping at regional and local scales is revealing that the stratigraphy and modificational histories of polar materials by various processes are highly complex at both poles. Here, we describe some of our recent results in polar geologic mapping and how they address the geologic processes involved and implications for polar climate history.

Geology and Photometric Variation of Solar System Bodies with Minor Atmospheres: Implications for Solid Exoplanets

PubMed Central

Kimura, Jun; Dohm, James; Ohtake, Makiko

2014-01-01

Abstract A reasonable basis for future astronomical investigations of exoplanets lies in our best knowledge of the planets and satellites in the Solar System. Solar System bodies exhibit a wide variety of surface environments, even including potential habitable conditions beyond Earth, and it is essential to know how they can be characterized from outside the Solar System. In this study, we provide an overview of geological features of major Solar System solid bodies with minor atmospheres (i.e., the terrestrial Moon, Mercury, the Galilean moons, and Mars) that affect surface albedo at local to global scale, and we survey how they influence point-source photometry in the UV/visible/near IR (i.e., the reflection-dominant range). We simulate them based on recent mapping products and also compile observed light curves where available. We show a 5–50% peak-to-trough variation amplitude in one spin rotation associated with various geological processes including heterogeneous surface compositions due to igneous activities, interaction with surrounding energetic particles, and distribution of grained materials. Some indications of these processes are provided by the amplitude and wavelength dependence of variation in combinations of the time-averaged spectra. We also estimate the photometric precision needed to detect their spin rotation rates through periodogram analysis. Our survey illustrates realistic possibilities for inferring the detailed properties of solid exoplanets with future direct imaging observations. Key Words: Planetary environments—Planetary geology—Solar System—Extrasolar terrestrial planets. Astrobiology 14, 753–768. PMID:25238324

Modelling the Mont Terri HE-D experiment for the Thermal–Hydraulic–Mechanical response of a bedded argillaceous formation to heating

DOE PAGES

Garitte, B.; Nguyen, T. S.; Barnichon, J. D.; ...

2017-05-09

Coupled thermal–hydrological–mechanical (THM) processes in the near field of deep geological repositories can influence several safety features of the engineered and geological barriers. Among those features are: the possibility of damage in the host rock, the time for re-saturation of the bentonite, and the perturbations in the hydraulic regime in both the rock and engineered seals. Within the international cooperative code-validation project DECOVALEX-2015, eight research teams developed models to simulate an in situ heater experiment, called HE-D, in Opalinus Clay at the Mont Terri Underground Research Laboratory in Switzerland. The models were developed from the theory of poroelasticity in ordermore » to simulate the coupled THM processes that prevailed during the experiment and thereby to characterize the in situ THM properties of Opalinus Clay. The modelling results for the evolution of temperature, pore water pressure, and deformation at different points are consistent among the research teams and compare favourably with the experimental data in terms of trends and absolute values. The models were able to reproduce the main physical processes of the experiment. In particular, most teams simulated temperature and thermally induced pore water pressure well, including spatial variations caused by inherent anisotropy due to bedding.« less

Modelling the Mont Terri HE-D experiment for the Thermal–Hydraulic–Mechanical response of a bedded argillaceous formation to heating

DOE Office of Scientific and Technical Information (OSTI.GOV)

Garitte, B.; Nguyen, T. S.; Barnichon, J. D.

Coupled thermal–hydrological–mechanical (THM) processes in the near field of deep geological repositories can influence several safety features of the engineered and geological barriers. Among those features are: the possibility of damage in the host rock, the time for re-saturation of the bentonite, and the perturbations in the hydraulic regime in both the rock and engineered seals. Within the international cooperative code-validation project DECOVALEX-2015, eight research teams developed models to simulate an in situ heater experiment, called HE-D, in Opalinus Clay at the Mont Terri Underground Research Laboratory in Switzerland. The models were developed from the theory of poroelasticity in ordermore » to simulate the coupled THM processes that prevailed during the experiment and thereby to characterize the in situ THM properties of Opalinus Clay. The modelling results for the evolution of temperature, pore water pressure, and deformation at different points are consistent among the research teams and compare favourably with the experimental data in terms of trends and absolute values. The models were able to reproduce the main physical processes of the experiment. In particular, most teams simulated temperature and thermally induced pore water pressure well, including spatial variations caused by inherent anisotropy due to bedding.« less

Glaciations, gradients, and geography: multiple drivers of diversification of bush frogs in the Western Ghats Escarpment

PubMed Central

Menezes, Riya C.; Jayarajan, Aditi; Shanker, Kartik

2016-01-01

The historical processes underlying high diversity in tropical biodiversity hotspots like the Western Ghats of Peninsular India remain poorly understood. We sampled bush frogs on 13 massifs across the Western Ghats Escarpment and examined the relative influence of Quaternary glaciations, ecological gradients and geological processes on the spatial patterns of lineage and clade diversification. The results reveal a large in situ radiation (more than 60 lineages), exhibiting geographical structure and clade-level endemism, with two deeply divergent sister clades, North and South, highlighting the biogeographic significance of an ancient valley, the Palghat Gap. A majority of the bush frog sister lineages were isolated on adjacent massifs, and signatures of range stasis provide support for the dominance of geological processes in allopatric speciation. In situ diversification events within the montane zones (more than 1800 m) of the two highest massifs suggest a role for climate-mediated forest-grassland persistence. Independent transitions along elevational gradients among sub-clades during the Miocene point to diversification along the elevational gradient. The study highlights the evolutionary significance of massifs in the Western Ghats with the high elevations acting as centres of lineage diversification and the low- and mid-elevations of the southern regions, with deeply divergent lineages, serving as museums. PMID:27534957

Glaciations, gradients, and geography: multiple drivers of diversification of bush frogs in the Western Ghats Escarpment.

PubMed

Vijayakumar, S P; Menezes, Riya C; Jayarajan, Aditi; Shanker, Kartik

2016-08-17

The historical processes underlying high diversity in tropical biodiversity hotspots like the Western Ghats of Peninsular India remain poorly understood. We sampled bush frogs on 13 massifs across the Western Ghats Escarpment and examined the relative influence of Quaternary glaciations, ecological gradients and geological processes on the spatial patterns of lineage and clade diversification. The results reveal a large in situ radiation (more than 60 lineages), exhibiting geographical structure and clade-level endemism, with two deeply divergent sister clades, North and South, highlighting the biogeographic significance of an ancient valley, the Palghat Gap. A majority of the bush frog sister lineages were isolated on adjacent massifs, and signatures of range stasis provide support for the dominance of geological processes in allopatric speciation. In situ diversification events within the montane zones (more than 1800 m) of the two highest massifs suggest a role for climate-mediated forest-grassland persistence. Independent transitions along elevational gradients among sub-clades during the Miocene point to diversification along the elevational gradient. The study highlights the evolutionary significance of massifs in the Western Ghats with the high elevations acting as centres of lineage diversification and the low- and mid-elevations of the southern regions, with deeply divergent lineages, serving as museums. © 2016 The Author(s).

30 CFR Appendix to Part 553 - List of U.S. Geological Survey Topographic Maps

Code of Federal Regulations, 2013 CFR

2013-07-01

...; Three Mile Bay; Tigre Lagoon; Timbalier Island; Triumph; Venice; Weeks; West of Johnson Bayou; Western... Islands; Tivoli SE; Turtle Bay; Umbrella Point; Virginia Point; West of Johnson Bayou; Whites Ranch...; Hollingers Island; Isle Aux Herbes; Kreole; Lillian; Little Dauphin Island; Little Point Clear; Magnolia...

30 CFR Appendix to Part 553 - List of U.S. Geological Survey Topographic Maps

Code of Federal Regulations, 2012 CFR

2012-07-01

...; Three Mile Bay; Tigre Lagoon; Timbalier Island; Triumph; Venice; Weeks; West of Johnson Bayou; Western... Islands; Tivoli SE; Turtle Bay; Umbrella Point; Virginia Point; West of Johnson Bayou; Whites Ranch...; Hollingers Island; Isle Aux Herbes; Kreole; Lillian; Little Dauphin Island; Little Point Clear; Magnolia...

30 CFR Appendix to Part 553 - List of U.S. Geological Survey Topographic Maps

Code of Federal Regulations, 2014 CFR

2014-07-01

...; Three Mile Bay; Tigre Lagoon; Timbalier Island; Triumph; Venice; Weeks; West of Johnson Bayou; Western... Islands; Tivoli SE; Turtle Bay; Umbrella Point; Virginia Point; West of Johnson Bayou; Whites Ranch...; Hollingers Island; Isle Aux Herbes; Kreole; Lillian; Little Dauphin Island; Little Point Clear; Magnolia...

Behind the Scenery.

ERIC Educational Resources Information Center

Scanlon, Andrew, Ed.; And Others

Knowledge of the physiographic evolution of the Tasmanian landscape is still very far from complete; however, all aspects of the landscape are governed by definable processes acting on the rock medley which is the heritage of Tasmania's geological history. This book explains Tasmania's landforms and geology in terms of geologic processes. Chapters…

Regional mapping of soil parent material by machine learning based on point data

NASA Astrophysics Data System (ADS)

Lacoste, Marine; Lemercier, Blandine; Walter, Christian

2011-10-01

A machine learning system (MART) has been used to predict soil parent material (SPM) at the regional scale with a 50-m resolution. The use of point-specific soil observations as training data was tested as a replacement for the soil maps introduced in previous studies, with the aim of generating a more even distribution of training data over the study area and reducing information uncertainty. The 27,020-km 2 study area (Brittany, northwestern France) contains mainly metamorphic, igneous and sedimentary substrates. However, superficial deposits (aeolian loam, colluvial and alluvial deposits) very often represent the actual SPM and are typically under-represented in existing geological maps. In order to calibrate the predictive model, a total of 4920 point soil descriptions were used as training data along with 17 environmental predictors (terrain attributes derived from a 50-m DEM, as well as emissions of K, Th and U obtained by means of airborne gamma-ray spectrometry, geological variables at the 1:250,000 scale and land use maps obtained by remote sensing). Model predictions were then compared: i) during SPM model creation to point data not used in model calibration (internal validation), ii) to the entire point dataset (point validation), and iii) to existing detailed soil maps (external validation). The internal, point and external validation accuracy rates were 56%, 81% and 54%, respectively. Aeolian loam was one of the three most closely predicted substrates. Poor prediction results were associated with uncommon materials and areas with high geological complexity, i.e. areas where existing maps used for external validation were also imprecise. The resultant predictive map turned out to be more accurate than existing geological maps and moreover indicated surface deposits whose spatial coverage is consistent with actual knowledge of the area. This method proves quite useful in predicting SPM within areas where conventional mapping techniques might be too costly or lengthy or where soil maps are insufficient for use as training data. In addition, this method allows producing repeatable and interpretable results, whose accuracy can be assessed objectively.

Digital geologic map database of the Nevada Test Site area, Nevada

USGS Publications Warehouse

Wahl, R.R.; Sawyer, D.A.; Minor, S.A.; Carr, M.D.; Cole, J.C.; Swadley, W.C.; Laczniak, R.J.; Warren, R.G.; Green, K.S.; Engle, C.M.

1997-01-01

Forty years of geologic investigations at the Nevada Test Site (NTS) have been digitized. These data include all geologic information that: (1) has been collected, and (2) can be represented on a map within the map borders at the map scale is included in the map digital coverages. The following coverages are included with this dataset: Coverage Type Description geolpoly Polygon Geologic outcrops geolflts line Fault traces geolatts Point Bedding attitudes, etc. geolcald line Caldera boundaries geollins line Interpreted lineaments geolmeta line Metamorphic gradients The above coverages are attributed with numeric values and interpreted information. The entity files documented below show the data associated with each coverage.

Publications - RI 2000-1B | Alaska Division of Geological & Geophysical

Science.gov Websites

; Formations; Fossils; Geologic; Geologic Map; Geology; Glacial Processes; Kemik Sandstone; Marine; Marine ; Tectonics; Tertiary; Trace Fossils; Turbidites; Volcanic Ash Top of Page Department of Natural Resources

Significant achievements in the planetary geology program, 1981

NASA Technical Reports Server (NTRS)

Holt, H. E. (Editor)

1981-01-01

Recent developments in planetology research as reported at the 1981 NASA Planetary Geology Principal Investigators meeting are summarized. The evolution of the solar system, comparative planetology, and geologic processes active on other planets are considered. Galilean satellites and small bodies, Venus, geochemistry and regoliths, volcanic and aeolian processes and landforms, fluvial and periglacial processes, and planetary impact cratering, remote sensing, and cartography are discussed.

Atmospheric mercury emissions from mine wastes and surrounding geologically enriched terrains

USGS Publications Warehouse

Gustin, M.S.; Coolbaugh, M.F.; Engle, M.A.; Fitzgerald, B.C.; Keislar, R.E.; Lindberg, S.E.; Nacht, D.M.; Quashnick, J.; Rytuba, J.J.; Sladek, C.; Zhang, H.; Zehner, R.E.

2003-01-01

Waste rock and ore associated with Hg, precious and base metal mining, and their surrounding host rocks are typically enriched in mercury relative to natural background concentrations (<0.1 ??g Hg g-1). Mercury fluxes to the atmosphere from mineralized areas can range from background rates (0-15 ng m-2 h-1) to tens of thousands of ng m-2 h-1. Mercury enriched substrate constitutes a long-term source of mercury to the global atmospheric mercury pool. Mercury emissions from substrate are influenced by light, temperature, precipitation, and substrate mercury concentration, and occur during the day and night. Light-enhanced emissions are driven by two processes: desorption of elemental mercury accumulated at the soil:air interface, and photo reduction of mercury containing phases. To determine the need for and effectiveness of regulatory controls on short-lived anthropogenic point sources the contribution of mercury from geologic non-point sources to the atmospheric mercury pool needs to be quantified. The atmospheric mercury contribution from small areas of mining disturbance with relatively high mercury concentrations are, in general, less than that from surrounding large areas of low levels of mercury enrichment. In the arid to semi-arid west-ern United States volatilization is the primary means by which mercury is released from enriched sites.

Use of microcomputer in mapping depth of stratigraphic horizons in National Petroleum Reserve in Alaska

USGS Publications Warehouse

Payne, Thomas G.

1982-01-01

REGIONAL MAPPER is a menu-driven system in the BASIC language for computing and plotting (1) time, depth, and average velocity to geologic horizons, (2) interval time, thickness, and interval velocity of stratigraphic intervals, and (3) subcropping and onlapping intervals at unconformities. The system consists of three programs: FILER, TRAVERSER, and PLOTTER. A control point is a shot point with velocity analysis or a shot point at or near a well with velocity check-shot survey. Reflection time to and code number of seismic horizons are filed by digitizing tablet from record sections. TRAVERSER starts at a point of geologic control and, in traversing to another, parallels seismic events, records loss of horizons by onlap and truncation, and stores reflection time for geologic horizons at traversed shot points. TRAVERSER is basically a phantoming procedure. Permafrost thickness and velocity variations, buried canyons with low-velocity fill, and error in seismically derived velocity cause velocity anomalies that complicate depth mapping. Two depths to the top of the pebble is based shale are computed for each control point. One depth, designated Zs on seismically derived velocity. The other (Zw) is based on interval velocity interpolated linearly between wells and multiplied by interval time (isochron) to give interval thickness. Z w is computed for all geologic horizons by downward summation of interval thickness. Unknown true depth (Z) to the pebble shale may be expressed as Z = Zs + es and Z = Zw + ew where the e terms represent error. Equating the two expressions gives the depth difference D = Zs + Zw = ew + es A plot of D for the top of the pebble shale is readily contourable but smoothing is required to produce a reasonably simple surface. Seismically derived velocity used in computing Zs includes the effect of velocity anomalies but is subject to some large randomly distributed errors resulting in depth errors (es). Well-derived velocity used in computing Zw does not include the effect of velocity anomalies, but the error (ew) should reflect these anomalies and should be contourable (non-random). The D surface as contoured with smoothing is assumed to represent ew, that is, the depth effect of variations in permafrost thickness and velocity and buried canyon depth. Estimated depth (Zest) to each geologic horizon is the sum of Z w for that horizon and a constant e w as contoured for the pebble shale, which is the first highly continuous seismic horizon below the zone of anomalous velocity. Results of this 'depthing' procedure are compared with those of Tetra Tech, Inc., the subcontractor responsible for geologic and geophysical interpretation and mapping.

GIS Representation of Coal-Bearing Areas in North, Central, and South America

USGS Publications Warehouse

Tewalt, Susan J.; Kinney, Scott A.; Merrill, Matthew D.

2008-01-01

Worldwide coal consumption and international coal trade are projected to increase in the next several decades (Energy Information Administration, 2007). A search of existing literature indicates that in the Western Hemisphere, coal resources are known to occur in about 30 countries. The need exists to be able to depict these areas in a digital format for use in Geographic Information System (GIS) applications at small scales (large areas) and in visual presentations. Existing surficial geology GIS layers of the appropriate geologic age have been used as an approximation to depict the extent of coal-bearing areas in North, Central, and South America, as well as Greenland (fig. 1). Global surficial geology GIS data were created by the U.S. Geological Survey (USGS) for use in world petroleum assessments (Hearn and others, 2003). These USGS publications served as the major sources for the selection and creation of polygons to represent coal-bearing areas. Additional publications and maps by various countries and agencies were also used as sources of coal locations. GIS geologic polygons were truncated where literature or hardcopy maps did not indicate the presence of coal. The depicted areas are not adequate for use in coal resource calculations, as they were not adjusted for geologic structure and do not include coal at depth. Additionally, some coal areas in Central America could not be represented by the mapped surficial geology and are shown only as points based on descriptions or depictions from scientific publications or available maps. The provided GIS files are intended to serve as a backdrop for display of coal information. Three attributes of the coal that are represented by the polygons or points include geologic age (or range of ages), published rank (or range of ranks), and information source (published sources for age, rank, or physical location, or GIS geology base).

Study on Potential Changes in Geological and Disposal Environment Caused by 'Natural Phenomena' on a HLW Disposal System

NASA Astrophysics Data System (ADS)

Kawamura, M.; Umeda, K.; Ohi, T.; Ishimaru, T.; Niizato, T.; Yasue, K.; Makino, H.

2007-12-01

We have developed a formal evaluation method to assess the potential impact of natural phenomena (earthquakes and faulting; volcanism; uplift, subsidence, denudation and sedimentation; climatic and sea-level changes) on a High Level Radioactive Waste (HLW) Disposal System. In 2000, we had developed perturbation scenarios in a generic and conservative sense and illustrated the potential impact on a HLW disposal system. As results of the development of perturbation scenarios, two points were highlighted for consideration in subsequent work: improvement of the scenarios from the viewpoints of reality, transparency, traceability and consistency and avoiding extreme conservatism. Subsequently, we have thus developed a new procedure for describing such perturbation scenarios based on further studies of the characteristics of these natural perturbation phenomena in Japan. The approach to describing the perturbation scenario is effectively developed in five steps: Step 1: Description of potential process of phenomena and their impacts on the geological environment. Step 2: Characterization of potential changes of geological environment in terms of T-H-M-C (Thermal - Hydrological - Mechanical - Chemical) processes. The focus is on specific T-H-M-C parameters that influence geological barrier performance, utilizing the input from Step 1. Step 3: Classification of potential influences, based on similarity of T-H-M-C perturbations. This leads to development of perturbation scenarios to serve as a basis for consequence analysis. Step 4: Establishing models and parameters for performance assessment. Step 5: Calculation and assessment. This study focuses on identifying key T-H-M-C process associated with perturbations at Step 2. This framework has two advantages. First one is assuring maintenance of traceability during the scenario construction processes, facilitating the production and structuring of suitable records. The second is providing effective elicitation and organization of information from a wide range of investigations of earth sciences within a performance assessment context. In this framework, scenario development work proceeds in a stepwise manner, to ensure clear identification of the impact of processes associated with these phenomena on a HLW disposal system. Output is organized to create credible scenarios with required transparency, consistency, traceability and adequate conservatism. In this presentation, the potential impact of natural phenomena in the viewpoint of performance assessment for HLW disposal will be discussed and modeled using the approach.

Hydrocarbon Reservoir Identification in Volcanic Zone by using Magnetotelluric and Geochemistry Information

NASA Astrophysics Data System (ADS)

Firda, S. I.; Permadi, A. N.; Supriyanto; Suwardi, B. N.

2018-03-01

The resistivity of Magnetotelluric (MT) data show the resistivity mapping in the volcanic reservoir zone and the geochemistry information for confirm the reservoir and source rock formation. In this research, we used 132 data points divided with two line at exploration area. We used several steps to make the resistivity mapping. There are time series correction, crosspower correction, then inversion of Magnetotelluric (MT) data. Line-2 and line-3 show anomaly geological condition with Gabon fault. The geology structure from the resistivity mapping show the fault and the geological formation with the geological rock data mapping distribution. The geochemistry information show the maturity of source rock formation. According to core sample analysis information, we get the visual porosity for reservoir rock formation in several geological structure. Based on that, we make the geological modelling where the potential reservoir and the source rock around our interest area.

Physical exploration for uranium during 1951 in the Silver Reef district, Washington County, Utah

USGS Publications Warehouse

Stugard, Frederick

1953-01-01

During 1951 a joint exploration program of the most promising uraniferous areas in the Silver Reef district was made by the U.S. Geological Survey and the u.S. Atomic Energy Commission.  A U.S. Bureau of Mines drill crew, on contract to the Atomic Energy Commission, did 2,450 feet of diamond drilling under the geological supervision of the U.S. Geological Survey.  The purpose of the drilling was to delineate broadly the favorable ground for commercial development of the uranium depostis.  Ten drill holes were located around Pumpkin Point, which is the northeastern end of Buckeye Reef, to probe for extensions of small ore shootsmined on the Point in fine-grained sandstones of the Chinle formation.  Three additional holes were located around teh Tecumseh Hill to prbe for extensions of the small showings of uranium-bearing rocks of Buckeye Reef.

GeoSciML version 3: A GML application for geologic information

NASA Astrophysics Data System (ADS)

International Union of Geological Sciences., I. C.; Richard, S. M.

2011-12-01

After 2 years of testing and development, XML schema for GeoSciML version 3 are now ready for application deployment. GeoSciML draws from many geoscience data modelling efforts to establish a common suite of feature types to represent information associated with geologic maps (materials, structures, and geologic units) and observations including structure data, samples, and chemical analyses. After extensive testing and use case analysis, in December 2008 the CGI Interoperability Working Group (IWG) released GeoSciML 2.0 as an application schema for basic geological information. GeoSciML 2.0 is in use to deliver geologic data by the OneGeology Europe portal, the Geological Survey of Canada Groundwater Information Network (wet GIN), and the Auscope Mineral Resources portal. GeoSciML to version 3.0 is updated to OGC Geography Markup Language v3.2, re-engineered patterns for association of element values with controlled vocabulary concepts, incorporation of ISO19156 Observation and Measurement constructs for representing numeric and categorical values and for representing analytical data, incorporation of EarthResourceML to represent mineral occurrences and mines, incorporation of the GeoTime model to represent GSSP and stratigraphic time scale, and refactoring of the GeoSciML namespace to follow emerging ISO practices for decoupling of dependencies between standardized namespaces. These changes will make it easier for data providers to link to standard vocabulary and registry services. The depth and breadth of GeoSciML remains largely unchanged, covering the representation of geologic units, earth materials and geologic structures. ISO19156 elements and patterns are used to represent sampling features such as boreholes and rock samples, as well as geochemical and geochronologic measurements. Geologic structures include shear displacement structures (brittle faults and ductile shears), contacts, folds, foliations, lineations and structures with no preferred orientation (e.g. 'miarolitic cavities'). The Earth material package allows for the description of both individual components, such as minerals, and compound materials, such as rocks or unconsolidated materials. Provision is made for alteration, weathering, metamorphism, particle geometry, fabric, and petrophysical descriptions. Mapped features describe the shape of the geological features using standard GML geometries, such as polygons, lines, points or 3D volumes. Geological events provide the age, process and environment of formation of geological features. The Earth Resource section includes features to represent mineral occurrences and mines and associated human activities independently. This addition allows description of resources and reserves that can comply with national and internationally accepted reporting codes. GeoSciML v3 is under consideration as the data model for INSPIRE annex 2 geologic reporting in Europe.

Investigations on indoor Radon in Austria, part 2: Geological classes as categorical external drift for spatial modelling of the Radon potential.

PubMed

Bossew, Peter; Dubois, Grégoire; Tollefsen, Tore

2008-01-01

Geological classes are used to model the deterministic (drift or trend) component of the Radon potential (Friedmann's RP) in Austria. It is shown that the RP can be grouped according to geological classes, but also according to individual geological units belonging to the same class. Geological classes can thus serve as predictors for mean RP within the classes. Variability of the RP within classes or units is interpreted as the stochastic part of the regionalized variable RP; however, there does not seem to exist a smallest unit which would naturally divide the RP into a deterministic and a stochastic part. Rather, this depends on the scale of the geological maps used, down to which size of geological units is used for modelling the trend. In practice, there must be a sufficient number of data points (measurements) distributed as uniformly as possible within one unit to allow reasonable determination of the trend component.

Introductory Geology From the Liberal Arts Approach: A Geology-Sociology Linked Course

NASA Astrophysics Data System (ADS)

Walsh, E. O.; Davis, E.

2008-12-01

Geology can be a hard sell to college students, especially to college students attending small, liberal arts institutions in localities that lack exaggerated topography. At these schools, Geology departments that wish to grow must work diligently to attract students to the major; professors must be able to convince a wider audience of students that geology is relevant to their everyday lives. Toward this end, a Physical Geology course was linked with an introductory Sociology course through the common theme of Consumption. The same students took the two courses in sequence, beginning with the Sociology course and ending with Physical Geology; thus, students began by discussing the role of consumption in society and ended by learning about the geological processes and implications of consumption. Students were able to ascertain the importance of geology in their daily lives by connecting Earth processes to specific products they consume, such as cell phones and bottled water. Students were also able to see the connection between seemingly disparate fields of study, which is a major goal of the liberal arts. As a theme, Consumption worked well to grab the attention of students interested in diverse issues, such as environmental science or social justice. A one-hour lecture illustrating the link between sociology and geology was developed for presentation to incoming freshmen and their parents to advertise the course. Initial response has been positive, showing an increase in awareness of geological processes among students with a wide range of interests.

Importance of dust storms in the diagenesis of sandstones: a case study, Entrada sandstone in the Ghost Ranch area, New Mexico, USA

NASA Astrophysics Data System (ADS)

Orhan, Hükmü

1992-04-01

The importance of dust storms on geological processes has only been studied recently. Case-hardening, desert-varnish formation, duricrust development, reddening and cementation of sediments and caliche formation, are some important geological processes related to dust storms. Dust storms can also be a major source for cements in aeolian sandstones. The Jurassic aeolian Entrada Formation in the Ghost Ranch area is composed of quartz with minor amounts of feldspar and rock fragments, and is cemented with smectite as grain coatings and calcite and kaolinite as pore fillings. Smectite shows a crinkly and honeycomb-like morphology which points to an authigenic origin. The absence of smectite as framework grains and the presence of partially dissolved grains, coated with smectite and smectite egg-shells, indicate an external source. Clay and fine silt-size particles are believed to be the major source for cements, smectite and calcite in the Entrada Formation. The common association of kaolinite with altered feldspar, and the absence of kaolinite in spots heavily cemented with calcite, lead to the conclusions that the kaolinite formation postdates carbonates and that framework feldspar grains were the source of kaolinite.

Evolution of groundwater chemistry along fault structures in sandstone

NASA Astrophysics Data System (ADS)

Dausse, A.; Guiheneuf, N.; Pierce, A. A.; Cherry, J. A.; Parker, B. L.

2016-12-01

Fluid-rock interaction across geological structures plays a major role on evolution of groundwater chemistry and physical properties of reservoirs. In particular, groundwater chemistry evolve on different facies according to residence times which can be linked to hydraulic properties of the geological unit. In this study, we analyze groundwater samples collected at an 11 km² site located in southern California (USA) to evaluate the evolution of groundwater chemistry according to different geological structures. Major and minor elements were sampled at the same period of time from 40 wells located along the main structures in the northeast of the site, where major NE-SW trending faults and other oriented ESE-WNW are present in sandstone Chatsworth formation. By analyzing the spatial distribution of ions concentration at the site scale, several hydrochemical compartments (main- and sub-compartments) can be distinguished and are in agreement with structural and hydrological information. In particular, as previously observed from piezometric informations, the shear zone fault serves as a barrier for groundwater flow and separates the site on two mains compartments. In addition, the analysis along major faults oriented orthogonal to this shear zone (ESE-WNW) in the eastern part of the site, shows an increase in mineralization following the hydraulic gradient. This salinization has been confirmed by ionic ratio and Gibbs plots and is attributed to fluid-rock interaction processes. In particular, groundwater chemistry seems to evolve from bicarbonate to sodium facies. Moreover, the gradient of concentrations vary depending on fault locations and can be related to their hydraulic properties and hence to different characteristic times from point to point. To conclude, major faults across the site display different degrees of groundwater chemistry evolution, linked to their physical properties, which may in turn have a large impact on contaminant transport and attenuation.

Publications - GMC 184 | Alaska Division of Geological & Geophysical

Science.gov Websites

Unit #1, Anchor Point #1, Coal Bay State #1 Authors: Unknown Publication Date: 1991 Publisher: Alaska : South Diamond Gulch Unit #1, South Caribou Hill Unit #1, Anchor Point #1, Coal Bay State #1: Alaska

The Challenges of Observing Geologically: Third Graders' Descriptions of Rock and Mineral Properties

ERIC Educational Resources Information Center

Ford, Danielle J.

2005-01-01

The understandings of properties that children develop in the context of rock and mineral identification point to the challenges of observing in a manner authentic to the discipline of geology. The notebook entries of 34 third graders written during the enactment of a commercial unit on earth materials were investigated for their descriptions of…

Using Portable Media Players (iPod) to Support Electronic Course Materials during a Field-Based Introductory Geology Course

ERIC Educational Resources Information Center

Elkins, Joe T.

2009-01-01

Electronic course materials, such a videos, PowerPoint presentations, and animations, have become essential educational tools in classroom-based geoscience courses to enhance students' introduction to basic geological concepts. However, during field trips, the ability to offer students these electronic conceptual supports is lacking where students…

Spatial Foundations of Science Education: The Illustrative Case of Instruction on Introductory Geological Concepts

ERIC Educational Resources Information Center

Liben, Lynn S.; Kastens, Kim A.; Christensen, Adam E.

2011-01-01

To study the role of spatial concepts in science learning, 125 college students with high, medium, or low scores on a horizontality (water-level) spatial task were given information about geological strike and dip using existing educational materials. Participants mapped an outcrop's strike and dip, a rod's orientation, pointed to a distant…

Introducing students to digital geological mapping: A workflow based on cheap hardware and free software

NASA Astrophysics Data System (ADS)

Vrabec, Marko; Dolžan, Erazem

2016-04-01

The undergraduate field course in Geological Mapping at the University of Ljubljana involves 20-40 students per year, which precludes the use of specialized rugged digital field equipment as the costs would be way beyond the capabilities of the Department. A different mapping area is selected each year with the aim to provide typical conditions that a professional geologist might encounter when doing fieldwork in Slovenia, which includes rugged relief, dense tree cover, and moderately-well- to poorly-exposed bedrock due to vegetation and urbanization. It is therefore mandatory that the digital tools and workflows are combined with classical methods of fieldwork, since, for example, full-time precise GNSS positioning is not viable under such circumstances. Additionally, due to the prevailing combination of complex geological structure with generally poor exposure, students cannot be expected to produce line (vector) maps of geological contacts on the go, so there is no need for such functionality in hardware and software that we use in the field. Our workflow therefore still relies on paper base maps, but is strongly complemented with digital tools to provide robust positioning, track recording, and acquisition of various point-based data. Primary field hardware are students' Android-based smartphones and optionally tablets. For our purposes, the built-in GNSS chips provide adequate positioning precision most of the time, particularly if they are GLONASS-capable. We use Oruxmaps, a powerful free offline map viewer for the Android platform, which facilitates the use of custom-made geopositioned maps. For digital base maps, which we prepare in free Windows QGIS software, we use scanned topographic maps provided by the National Geodetic Authority, but also other maps such as aerial imagery, processed Digital Elevation Models, scans of existing geological maps, etc. Point data, like important outcrop locations or structural measurements, are entered into Oruxmaps as waypoints. Students are also encouraged to directly measure structural data with specialized Android apps such as the MVE FieldMove Clino. Digital field data is exported from Oruxmaps to Windows computers primarily in the ubiquitous GPX data format and then integrated in the QGIS environment. Recorded GPX tracks are also used with the free Geosetter Windows software to geoposition and tag any digital photographs taken in the field. With minimal expenses, our workflow provides the students with basic familiarity and experience in using digital field tools and methods. The workflow is also practical enough for the prevailing field conditions of Slovenia that the faculty staff is using it in geological mapping for scientific research and consultancy work.

Development of an Anisotropic Geological-Based Land Use Regression and Bayesian Maximum Entropy Model for Estimating Groundwater Radon across Northing Carolina

NASA Astrophysics Data System (ADS)

Messier, K. P.; Serre, M. L.

2015-12-01

Radon (222Rn) is a naturally occurring chemically inert, colorless, and odorless radioactive gas produced from the decay of uranium (238U), which is ubiquitous in rocks and soils worldwide. Exposure to 222Rn is likely the second leading cause of lung cancer after cigarette smoking via inhalation; however, exposure through untreated groundwater is also a contributing factor to both inhalation and ingestion routes. A land use regression (LUR) model for groundwater 222Rn with anisotropic geological and 238U based explanatory variables is developed, which helps elucidate the factors contributing to elevated 222Rn across North Carolina. Geological and uranium based variables are constructed in elliptical buffers surrounding each observation such that they capture the lateral geometric anisotropy present in groundwater 222Rn. Moreover, geological features are defined at three different geological spatial scales to allow the model to distinguish between large area and small area effects of geology on groundwater 222Rn. The LUR is also integrated into the Bayesian Maximum Entropy (BME) geostatistical framework to increase accuracy and produce a point-level LUR-BME model of groundwater 222Rn across North Carolina including prediction uncertainty. The LUR-BME model of groundwater 222Rn results in a leave-one out cross-validation of 0.46 (Pearson correlation coefficient= 0.68), effectively predicting within the spatial covariance range. Modeled results of 222Rn concentrations show variability among Intrusive Felsic geological formations likely due to average bedrock 238U defined on the basis of overlying stream-sediment 238U concentrations that is a widely distributed consistently analyzed point-source data.

Precomputing upscaled hydraulic conductivity for complex geological structures

NASA Astrophysics Data System (ADS)

Mariethoz, G.; Jha, S. K.; George, M.; Maheswarajah, S.; John, V.; De Re, D.; Smith, M.

2013-12-01

3D geological models are built to capture the geological heterogeneity at a fine scale. However groundwater modellers are often interested in the hydraulic conductivity (K) values at a much coarser scale to reduce the numerical burden. Upscaling is used to assign conductivity to large volumes, which necessarily causes a loss of information. Recent literature has shown that the connectivity in the channelized structures is an important feature that needs to be taken into account for accurate upscaling. In this work we study the effect of channel parameters, e.g. width, sinuosity, connectivity etc. on the upscaled values of the hydraulic conductivity and the associated uncertainty. We devise a methodology that derives correspondences between a lithological description and the equivalent hydraulic conductivity at a larger scale. The method uses multiple-point geostatistics simulations (MPS) and parameterizes the 3D structures by introducing continuous rotation and affinity parameters. Additional statistical characterization is obtained by transition probabilities and connectivity measures. Equivalent hydraulic conductivity is then estimated by solving a flow problem for the entire heterogeneous domain by applying steady state flow in horizontal and vertical directions. This is systematically performed for many random realisations of the small scale structures to enable a probability distribution for the equivalent upscaled hydraulic conductivity. This process allows deriving systematic relationships between a given depositional environment and precomputed equivalent parameters. A modeller can then exploit the prior knowledge of the depositional environment and expected geological heterogeneity to bypass the step of generating small-scale models, and directly work with upscaled values.

The graphic cell method: a new look at digitizing geologic maps

USGS Publications Warehouse

Hanley, J.T.

1982-01-01

The graphic cell method is an alternative method of digitizing areal geologic information. It involves a discrete-point sampling scheme in which the computer establishes a matrix of cells over the map. Each cell and the whole cell is assigned the identity or value of the geologic information that is recognized at its center. Cell size may be changed to suit the needs of the user. The computer program resolves the matrix and identifies potential errors such as multiple assignments. Input includes the digitized boundaries of each geologic formation. This method should eliminate a primary bottleneck in the creation and testing of geomathematical models in such disciplines as resource appraisal. ?? 1982.

The periodic structure of the natural record, and nonlinear dynamics.

USGS Publications Warehouse

Shaw, H.R.

1987-01-01

This paper addresses how nonlinear dynamics can contribute to interpretations of the geologic record and evolutionary processes. Background is given to explain why nonlinear concepts are important. A resume of personal research is offered to illustrate why I think nonlinear processes fit with observations on geological and cosmological time series data. The fabric of universal periodicity arrays generated by nonlinear processes is illustrated by means of a simple computer mode. I conclude with implications concerning patterns of evolution, stratigraphic boundary events, and close correlations of major geologically instantaneous events (such as impacts or massive volcanic episodes) with any sharply defined boundary in the geologic column. - from Author

Geologic process studies using Synthetic Aperture Radar (SAR) data

NASA Technical Reports Server (NTRS)

Evans, Diane L.

1992-01-01

The use of SAR data to study geologic processes for better understanding of recent tectonic activity and climate change as well as the mitigation of geologic hazards and exploration for nonrenewable resources is discussed. The geologic processes that are particularly amenable to SAR-based data include volcanism; soil erosion, degradation, and redistribution; coastal erosion and inundation; glacier fluctuations; permafrost; and crustal motions. When SAR data are combined with data from other planned spaceborne sensors including ESA ERS, the Japanese Earth Resources Satellite, and the Canadian Radarsat, it will be possible to build a time-series view of temporal changes over many regions of earth.

Native American lithic procurement along the international border in the boot heel region of southwestern New Mexico

NASA Astrophysics Data System (ADS)

Zeigler, K. E.; Hogan, P.; Hughes, C.; Kurota, A.

2011-06-01

Multidisciplinary field projects can be very useful to a more fundamental understanding of the world around us, though these projects are not as common as they should be. In particular, the combination of archeology and geology combines our understanding of human behavior and human use of the landscape with an intimate knowledge of geologic processes and the materials available for human use in order to gain a broader understanding of human-Earth interaction. Here we present data from a cross-disciplinary project that uses a common dataset, archeological artifacts, to explore the anthropological and geologic implications of useage patterns. Archeological excavations and surveys conducted by the Office of Contract Archeology in 2007 along the route of the proposed international border fence reveal patterns of use of geologic materials by Archaic, Formative and Protohistoric Native Americans in the Boot Heel of southwestern New Mexico. Thousands of artifacts were recorded in multiple sites from Guadalupe Pass in the southern Peloncillo Mountains to the Carrizalillo Hills west of Columbus. We identified the lithologies of artifacts, ranging from projectile points to groundstones, and then constructed material movement maps based on either known procurement sites ("quarries") or outcrops identified as the closest source to a given site for each lithology. Not unexpectedly, the majority of the rock types utilized by native peoples are local siliceous volcanic materials. However, several artifacts constructed from obsidian were transported into the region from northern Mexico and eastern Arizona, indicating long-distance travel and/or trade routes. We also examine useage pattern difference between Archaic, Formative and Protohistoric sites. Additionally, a dramatic change in distribution of sources for geologic materials occurs between one pre-Spanish site and one post-Spanish site that are adjacent to one another.

Native American lithic procurement along the international border in the boot heel region of southwestern New Mexico

NASA Astrophysics Data System (ADS)

Zeigler, K. E.; Hughes, C.; Kurota, A.; Hogan, P.

2010-12-01

Multidisciplinary field projects can be very useful to a more fundamental understanding of the world around us, though these projects are not as common as they should be. In particular, the combination of archeology and geology combines our understanding of human behavior and human use of the landscape with an intimate knowledge of geologic processes and the materials available for human use in order to gain a broader understanding of human-Earth interaction. Here we present data from a cross-disciplinary project that uses a common dataset, archeological artifacts, to explore the anthropological and geologic implications of useage patterns. Archeological excavations and surveys conducted by the Office of Contract Archeology in 2007 along the route of the proposed international border fence reveal patterns of use of geologic materials by Archaic, Formative and Protohistoric Native Americans in the Boot Heel of southwestern New Mexico. Thousands of artifacts were recorded in multiple sites from Guadalupe Pass in the southern Peloncillo Mountains to the Carrizalillo Hills west of Columbus. We identified the lithologies of artifacts, ranging from projectile points to groundstones, and then constructed material movement maps based on either known procurement sites ("quarries") or outcrops identified as the closest source to a given site for each lithology. Not unexpectedly, the majority of the rock types utilized by native peoples are local siliceous volcanic materials. However, several artifacts constructed from obsidian were transported into the region from northern Mexico and eastern Arizona, indicating long-distance travel and/or trade routes. We also examine useage pattern difference between Archaic, Formative and Protohistoric sites. Additionally, a dramatic change in distribution of sources for geologic materials occurs between one pre-Spanish site and one post-Spanish site that are adjacent to one another.

Field Geology/Processes

NASA Technical Reports Server (NTRS)

Allen, Carlton; Jakes, Petr; Jaumann, Ralf; Marshall, John; Moses, Stewart; Ryder, Graham; Saunders, Stephen; Singer, Robert

1996-01-01

The field geology/process group examined the basic operations of a terrestrial field geologist and the manner in which these operations could be transferred to a planetary lander. Four basic requirements for robotic field geology were determined: geologic content; surface vision; mobility; and manipulation. Geologic content requires a combination of orbital and descent imaging. Surface vision requirements include range, resolution, stereo, and multispectral imaging. The minimum mobility for useful field geology depends on the scale of orbital imagery. Manipulation requirements include exposing unweathered surfaces, screening samples, and bringing samples in contact with analytical instruments. To support these requirements, several advanced capabilities for future development are recommended. Capabilities include near-infrared reflectance spectroscopy, hyper-spectral imaging, multispectral microscopy, artificial intelligence in support of imaging, x ray diffraction, x ray fluorescence, and rock chipping.

Look before you build; geologic studies for safer land development in the San Francisco Bay area

USGS Publications Warehouse

Blair-Tyler, Martha

1995-01-01

This Circular provides a general description of the types of geologic hazards that exist throughout the United States. In nontechnical language this book describes how geologic information can be incorporated in the land-use development process and contains useful discussion of several examples from the San Francisco Bay area and elsewhere in the United States of how geologic information is already being used in the development process by some cities and counties.

Towards a Convention on Geological Heritage (CGH) for the protection of Geological Heritage

NASA Astrophysics Data System (ADS)

Brocx, Margaret; Semeniuk, Vic

2017-04-01

2 V & C Semeniuk Research Group; 21 Glenmere Rd., Warwick, WA, 6024 The history of the biological conservation essentially began with the IUCN and the global awakening following publication of "The Silent Spring". Since then the IUCN has been active in species conservation and later, when recognising the importance of biodiversity, in the development of a Convention on Biological Diversity. However, even in a framework of Convention on Biological Diversity, there are organisations, political systems/parties, and personnel that strive to subjugate and control nature and biology and use nature for profit or to benefit humankind (e.g., genetically modified foods, use of terrain for food production, use of forests as a resource, managed ecosystems, construction of luxury resorts and tourist resorts in wildernesses). This has been the same for geology, in that geological materials are fundamental to industrialisation in the use of metals, building materials, other commodities, and fossil fuels, and have been exploited often regardless of their geoheritage values. The history of geology and its conservation actually predates the focus on conservation of biology - Siccar Point, numerous palaeontologic sites, and other iconic geological sites serve as examples. But in spite of their recognition as iconic geological sites, areas such as Siccar Point, Cliefden Caves, Hallett Cove, and the Kimberley are still under threat. Given that firstly there is an importance to geological features of the Earth per se and, secondly, geological features as geodiversity underpin and sustain biological systems, there is a critical need to develop a convention, similar to the Convention on Biological Diversity, that recognises the importance of geology as a part of Nature. The scope of Geoheritage and the diversity of Geology is such that it involves all sub-disciplines of Geology (e.g., palaeontology, mineralogy, igneous, sedimentary, and metamorphic geology, structural geology, hydrology, geomorphology, and pedology) and, as such, Geoheritage must encompass the full diversity of Geology in scope and scale. Focusing on palaeontology to illustrate the principle: if extant biodiversity is afforded global conservation status through the Convention on Biological Diversity, and this generally involves species that have been in existence only for 10,000 to 1,000,000 years, then Phanerozoic palaeontology spanning the diversity and history of life over 500,000,000 years is far more (bio)diverse; additionally, palaeontology in combination with stratigraphy carries the story of evolution and the history of life and is the nature field library of Earth Heritage. We suggest therefore that the abiotic realm also requires a similar procedure of protection to the Convention on Biological Diversity, and we suggest a Convention on Geological Heritage.

Implicit Three-Dimensional Geo-Modelling Based on HRBF Surface

NASA Astrophysics Data System (ADS)

Gou, J.; Zhou, W.; Wu, L.

2016-10-01

Three-dimensional (3D) geological models are important representations of the results of regional geological surveys. However, the process of constructing 3D geological models from two-dimensional (2D) geological elements remains difficult and time-consuming. This paper proposes a method of migrating from 2D elements to 3D models. First, the geological interfaces were constructed using the Hermite Radial Basis Function (HRBF) to interpolate the boundaries and attitude data. Then, the subsurface geological bodies were extracted from the spatial map area using the Boolean method between the HRBF surface and the fundamental body. Finally, the top surfaces of the geological bodies were constructed by coupling the geological boundaries to digital elevation models. Based on this workflow, a prototype system was developed, and typical geological structures (e.g., folds, faults, and strata) were simulated. Geological modes were constructed through this workflow based on realistic regional geological survey data. For extended applications in 3D modelling of other kinds of geo-objects, mining ore body models and urban geotechnical engineering stratum models were constructed by this method from drill-hole data. The model construction process was rapid, and the resulting models accorded with the constraints of the original data.

High resolution seismics methods in application to fault zone detection

NASA Astrophysics Data System (ADS)

Matula, Rafal; Czaja, Klaudia; Mahmod, Adam Ahmed

2014-05-01

Surveys were carried out along border line between Outer Carpathians, Inner Carpathians and Pieniny Klippen Belt. Main point of interest was imaging transition zone structured by para-conglomerates, sandstone and clays lenses, crossing in near neighbourhood of Stare Bystre, village in the southern part of Poland. Actually geological works states existence of two hypothetical faults, first at the direction NE-SW and second NNW-SSE. Main aim of geological and geophysical investigation was to prove that mentioned fault has a system of smaller discontinuities connected with previous main fault activity. Para-conglomerate exposures, which is localized close to discussed fault is cut by visible system of cracks. That fact provide geological evidences that this system could be the effect of previous fault activity so in other words, it has a continuation up to main discontinuities. What is more part of the same formation para-conglomerates is covered by Neogen river sediments, so non-direct detection methods of cracks azimuth must be applied. Geophysical investigation was located near mentioned exposure and conducted in 3-D variant. Measurements were extremely focused on determining any changes of elevation buried para-conglomerates and velocity variation inside studied sediments. Seismic methods such as refraction and refraction tomography were used to imaging bedrock. Surveys were carried out in non typical acquisition, azimuthal schema. During field works 24- channels seismograph and 4 Hz, 10 Hz and 100 Hz geophones were used. Hypothetical discontinuities were estimated after analysing seismic records and expressed by velocity variation in bedding rocks and additionally evaluated changes in its elevation. Furthermore, in this study attempt of use refraction wave attributes related to loosing rock - para-conglomerates continuity were exposed. The presentation of geophysical data had a volumetric character what was easier to interpret and better related to assumptions about geological structure of mentioned zone. Correlation between geophysical and geological results seems to be very effective in reconstruction the forming processes of fault zones. Better understanding phenomena, which rules of young fault activities, reduce incorporated hazards and simultaneously bring information about presence geodynamics processes.

Adaptive Conditioning of Multiple-Point Geostatistical Facies Simulation to Flow Data with Facies Probability Maps

NASA Astrophysics Data System (ADS)

Khodabakhshi, M.; Jafarpour, B.

2013-12-01

Characterization of complex geologic patterns that create preferential flow paths in certain reservoir systems requires higher-order geostatistical modeling techniques. Multipoint statistics (MPS) provides a flexible grid-based approach for simulating such complex geologic patterns from a conceptual prior model known as a training image (TI). In this approach, a stationary TI that encodes the higher-order spatial statistics of the expected geologic patterns is used to represent the shape and connectivity of the underlying lithofacies. While MPS is quite powerful for describing complex geologic facies connectivity, the nonlinear and complex relation between the flow data and facies distribution makes flow data conditioning quite challenging. We propose an adaptive technique for conditioning facies simulation from a prior TI to nonlinear flow data. Non-adaptive strategies for conditioning facies simulation to flow data can involves many forward flow model solutions that can be computationally very demanding. To improve the conditioning efficiency, we develop an adaptive sampling approach through a data feedback mechanism based on the sampling history. In this approach, after a short period of sampling burn-in time where unconditional samples are generated and passed through an acceptance/rejection test, an ensemble of accepted samples is identified and used to generate a facies probability map. This facies probability map contains the common features of the accepted samples and provides conditioning information about facies occurrence in each grid block, which is used to guide the conditional facies simulation process. As the sampling progresses, the initial probability map is updated according to the collective information about the facies distribution in the chain of accepted samples to increase the acceptance rate and efficiency of the conditioning. This conditioning process can be viewed as an optimization approach where each new sample is proposed based on the sampling history to improve the data mismatch objective function. We extend the application of this adaptive conditioning approach to the case where multiple training images are proposed to describe the geologic scenario in a given formation. We discuss the advantages and limitations of the proposed adaptive conditioning scheme and use numerical experiments from fluvial channel formations to demonstrate its applicability and performance compared to non-adaptive conditioning techniques.

Mineral Grains, Dimples, and Hot Volcanic Organic Streams: Dynamic Geological Backstage of Macromolecular Evolution.

PubMed

Skoblikow, Nikolai E; Zimin, Andrei A

2018-04-01

The hypothesis of hot volcanic organic stream as the most probable and geologically plausible environment for abiogenic polycondensation is proposed. The primary synthesis of organic compounds is considered as result of an explosive volcanic (perhaps, meteorite-induced) eruption. The eruption was accompanied by a shock wave propagating in the primeval atmosphere and resulting in the formation of hot cloud of simple organic compounds-aldehydes, alcohols, amines, amino alcohols, nitriles, and amino acids-products, which are usually obtained under the artificial conditions in the spark-discharge experiments. The subsequent cooling of the organic cloud resulted in a gradual condensation and a serial precipitation of organic compounds (in order of decreasing boiling point values) into the liquid phase forming a hot, viscous and muddy organic stream (named "lithorheos"). That stream-even if the time of its existence was short-is considered here as a geologically plausible environment for abiogenic polycondensation. The substances successively prevailing in such a stream were cyanamide, acetamide, formamide, glycolonitrile, acetonitrile. An important role was played by mineral (especially, phosphate-containing) grains (named "lithosomes"), whose surface was modified with heterocyclic nitrogen compounds synthesized in the course of eruption. When such grains got into hot organic streams, their surface catalytic centers (named "lithozymes") played a decisive role in the emergence, facilitation and maintenance of prebiotic reactions and key processes characteristic of living systems. Owing to its cascade structure, the stream was a factor underlying the formation of mineral-polymeric aggregates (named "lithocytes") in the small natural streambed cavities (dimples)-as well as a factor of their further spread within larger geological locations which played a role of chemo-ecological niches. All three main stages of prebiotic evolution (primary organic synthesis, polycondensation, and formation of proto-cellular structures) are combined within a common dynamic geological process. We suppose macromolecular evolution had an extremely fast, "flash" start: the period from volcanic eruption to formation of lithocyte "populations" took not million years but just several tens of minutes. The scenario proposed can be verified experimentally with a three-module setup working with principles of dynamic (flow) chemistry in its core element.

Leverage and Delegation in Developing an Information Model for Geology

NASA Astrophysics Data System (ADS)

Cox, S. J.

2007-12-01

GeoSciML is an information model and XML encoding developed by a group of primarily geologic survey organizations under the auspices of the IUGS CGI. The scope of the core model broadly corresponds with information traditionally portrayed on a geologic map, viz. interpreted geology, some observations, the map legend and accompanying memoir. The development of GeoSciML has followed the methodology specified for an Application Schema defined by OGC and ISO 19100 series standards. This requires agreement within a community concerning their domain model, its formal representation using UML, documentation as a Feature Type Catalogue, with an XML Schema implementation generated from the model by applying a rule-based transformation. The framework and technology supports a modular governance process. Standard datatypes and GI components (geometry, the feature and coverage metamodels, metadata) are imported from the ISO framework. The observation and sampling model (including boreholes) is imported from OGC. The scale used for most scalar literal values (terms, codes, measures) allows for localization where necessary. Wildcards and abstract base- classes provide explicit extensibility points. Link attributes appear in a regular way in the encodings, allowing reference to external resources using URIs. The encoding is compatible with generic GI data-service interfaces (WFS, WMS, SOS). For maximum interoperability within a community, the interfaces may be specialised through domain-specified constraints (e.g. feature-types, scale and vocabulary bindings, query-models). Formalization using UML and XML allows use of standard validation and processing tools. Use of upper-level elements defined for generic GI application reduces the development effort and governance resonsibility, while maximising cross-domain interoperability. On the other hand, enabling specialization to be delegated in a controlled manner is essential to adoption across a range of subdisciplines and jurisdictions. The GeoSciML design team is responsible only for the part of the model that is unique to geology but for which general agreement can be reached within the domain. This paper is presented on behalf of the Interoperability Working Group of the IUGS Commission for Geoscience Information (CGI) - follow web-link for details of the membership.

Venus geology and tectonics - Hotspot and crustal spreading models and questions for the Magellan mission

NASA Technical Reports Server (NTRS)

Head, James W.; Crumpler, L. S.

1990-01-01

Spacecraft and ground-based observations of Venus have revealed a geologically young and active surface - with volcanoes, rift zones, orogenic belts and evidence for hotspots and crustal spreading - yet the processes responsible for these features cannot be identified from the available data. The Magellan spacecraft will acquire an unprecedented global data set which will provide a comprehensive and well resolved view of the planet. This will permit global geological mapping, an assessment of the style and relative importance of geological processes, and will help in the understanding of links between the surface geology and mantle dynamics of this earth-like planet.

Reports of Planetary Geology Program, 1981

NASA Technical Reports Server (NTRS)

Holt, H. E. (Compiler)

1981-01-01

Abstracts of 205 reports from Principal investigators of NASA's Planetary Geology Program succinctly summarize work conducted and reflect the significant accomplishments. The entries are arranged under the following topics: (1) Saturnian satellites; (2) asteroids, comets and Galilean satellites; (3) cratering processes and landform development; (4) volcanic processes and landforms; (5) Aerolian processes and landforms; (6) fluvial, preglacial, and other processes of landform development; (7) Mars polar deposits, volatiles, and climate; (8) structure, tectonics, and stratigraphy; (9) remote sensing and regolith chemistry; (10) cartography and geologic mapping; and (11) special programs.

Tectonic and climatic considerations for deep geological disposal of radioactive waste: A UK perspective.

PubMed

McEvoy, F M; Schofield, D I; Shaw, R P; Norris, S

2016-11-15

Identifying and evaluating the factors that might impact on the long-term integrity of a deep Geological Disposal Facility (GDF) and its surrounding geological and surface environment is central to developing a safety case for underground disposal of radioactive waste. The geological environment should be relatively stable and its behaviour adequately predictable so that scientifically sound evaluations of the long-term radiological safety of a GDF can be made. In considering this, it is necessary to take into account natural processes that could affect a GDF or modify its geological environment up to 1millionyears into the future. Key processes considered in this paper include those which result from plate tectonics, such as seismicity and volcanism, as well as climate-related processes, such as erosion, uplift and the effects of glaciation. Understanding the inherent variability of process rates, critical thresholds and likely potential influence of unpredictable perturbations represent significant challenges to predicting the natural environment. From a plate-tectonic perspective, a one million year time frame represents a very short segment of geological time and is largely below the current resolution of observation of past processes. Similarly, predicting climate system evolution on such time-scales, particularly beyond 200ka AP is highly uncertain, relying on estimating the extremes within which climate and related processes may vary with reasonable confidence. The paper highlights some of the challenges facing a deep geological disposal program in the UK to review understanding of the natural changes that may affect siting and design of a GDF. Crown Copyright © 2016. Published by Elsevier B.V. All rights reserved.

Web services in the U.S. geological survey streamstats web application

USGS Publications Warehouse

Guthrie, J.D.; Dartiguenave, C.; Ries, Kernell G.

2009-01-01

StreamStats is a U.S. Geological Survey Web-based GIS application developed as a tool for waterresources planning and management, engineering design, and other applications. StreamStats' primary functionality allows users to obtain drainage-basin boundaries, basin characteristics, and streamflow statistics for gaged and ungaged sites. Recently, Web services have been developed that provide the capability to remote users and applications to access comprehensive GIS tools that are available in StreamStats, including delineating drainage-basin boundaries, computing basin characteristics, estimating streamflow statistics for user-selected locations, and determining point features that coincide with a National Hydrography Dataset (NHD) reach address. For the state of Kentucky, a web service also has been developed that provides users the ability to estimate daily time series of drainage-basin average values of daily precipitation and temperature. The use of web services allows the user to take full advantage of the datasets and processes behind the Stream Stats application without having to develop and maintain them. ?? 2009 IEEE.

Geology Field Trips as Performance Evaluations

ERIC Educational Resources Information Center

Bentley, Callan

2009-01-01

One of the most important goals the author has for students in his introductory-level physical geology course is to give them the conceptual skills for solving geologic problems on their own. He wants students to leave his course as individuals who can use their knowledge of geologic processes and logic to figure out the extended geologic history…

Coastal single-beam bathymetry data collected in 2015 from Raccoon Point to Point Au Fer Island, Louisiana

USGS Publications Warehouse

Stalk, Chelsea A.; DeWitt, Nancy T.; Kindinger, Jack L.; Flocks, James G.; Reynolds, Billy J.; Kelso, Kyle W.; Fredericks, Joseph J.; Tuten, Thomas M.

2017-03-10

As part of the Barrier Island Comprehensive Monitoring Program (BICM), scientists from the U.S. Geological Survey (USGS) St. Petersburg Coastal and Marine Science Center conducted a nearshore single-beam bathymetry survey along the south-central coast of Louisiana, from Raccoon Point to Point Au Fer Island, in July 2015. The goal of the BICM program is to provide long-term data on Louisiana’s coastline and use this data to plan, design, evaluate, and maintain current and future barrier island restoration projects. The data described in this report will provide baseline bathymetric information for future research investigating island evolution, sediment transport, and recent and long-term geomorphic change, and will support modeling of future changes in response to restoration and storm impacts. The survey area encompasses more than 300 square kilometers of nearshore environment from Raccoon Point to Point Au Fer Island. This data series serves as an archive of processed single-beam bathymetry data, collected from July 22–29, 2015, under USGS Field Activity Number 2015-320-FA. Geographic information system data products include a 200-meter-cell-size interpolated bathymetry grid, trackline maps, and point data files. Additional files include error analysis maps, Field Activity Collection System logs, and formal Federal Geographic Data Committee metadata.

Publications - GMC 393 | Alaska Division of Geological & Geophysical

Science.gov Websites

Slope and Chukchi Sea wells: Atigaru Point 1, Burger 1, Crackerjack 1, Drew Point 1, E. Simpson 2, East of cuttings and core from 23 North Slope and Chukchi Sea wells: Atigaru Point 1, Burger 1 (433.0 K) Keywords Chukchi Sea; North Slope; Rock-Eval Pyrolysis Top of Page Department of Natural

Reports of Planetary Geology and Geophysics Program, 1984

NASA Technical Reports Server (NTRS)

Holt, H. E. (Compiler); Watters, T. R. (Compiler)

1985-01-01

Topics include outer planets and satellites; asteroids and comets; Venus; lunar origin and solar dynamics; cratering process; planetary interiors, petrology, and geochemistry; volcanic processes; aeolian processes and landforms; fluvial processes; geomorphology; periglacial and permafrost processes; remote sensing and regolith studies; structure, tectonics, and stratigraphy; geological mapping, cartography, and geodesy; and radar applications.

Analogue Study of Actinide Transport at Sites in Russia

DOE Office of Scientific and Technical Information (OSTI.GOV)

Novikov, A P; Simmons, A M; Halsey, W G

2003-02-12

The U. S. Department of Energy (DOE) and the Russian Academy of Sciences (RAS) are engaged in a three-year cooperative study to observe the behavior of actinides in the natural environment at selected disposal sites and/or contamination sites in Russia. The purpose is to develop experimental data and models for actinide speciation, mobilization and transport processes in support of geologic repository design, safety and performance analyses. Currently at the mid-point of the study, the accomplishments to date include: evaluation of existing data and data needs, site screening and selection, initial data acquisition, and development of preliminary conceptual models.

USGS Toxic Substances Hydrology Program, 2010

USGS Publications Warehouse

Buxton, Herbert T.

2010-01-01

The U.S. Geological Survey (USGS) Toxic Substances Hydrology Program adapts research priorities to address the most important contamination issues facing the Nation and to identify new threats to environmental health. The Program investigates two major types of contamination problems: * Subsurface Point-Source Contamination, and * Watershed and Regional Contamination. Research objectives include developing remediation methods that use natural processes, characterizing and remediating contaminant plumes in fractured-rock aquifers, identifying new environmental contaminants, characterizing new and understudied pesticides in common pesticide-use settings, explaining mercury methylation and bioaccumulation, and developing approaches for remediating watersheds affected by active and historic mining.

Stochastic modeling of a lava-flow aquifer system

USGS Publications Warehouse

Cronkite-Ratcliff, Collin; Phelps, Geoffrey A.

2014-01-01

This report describes preliminary three-dimensional geostatistical modeling of a lava-flow aquifer system using a multiple-point geostatistical model. The purpose of this study is to provide a proof-of-concept for this modeling approach. An example of the method is demonstrated using a subset of borehole geologic data and aquifer test data from a portion of the Calico Hills Formation, a lava-flow aquifer system that partially underlies Pahute Mesa, Nevada. Groundwater movement in this aquifer system is assumed to be controlled by the spatial distribution of two geologic units—rhyolite lava flows and zeolitized tuffs. The configuration of subsurface lava flows and tuffs is largely unknown because of limited data. The spatial configuration of the lava flows and tuffs is modeled by using a multiple-point geostatistical simulation algorithm that generates a large number of alternative realizations, each honoring the available geologic data and drawn from a geologic conceptual model of the lava-flow aquifer system as represented by a training image. In order to demonstrate how results from the geostatistical model could be analyzed in terms of available hydrologic data, a numerical simulation of part of an aquifer test was applied to the realizations of the geostatistical model.

The Cyborg Astrobiologist: testing a novelty detection algorithm on two mobile exploration systems at Rivas Vaciamadrid in Spain and at the Mars Desert Research Station in Utah

NASA Astrophysics Data System (ADS)

McGuire, P. C.; Gross, C.; Wendt, L.; Bonnici, A.; Souza-Egipsy, V.; Ormö, J.; Díaz-Martínez, E.; Foing, B. H.; Bose, R.; Walter, S.; Oesker, M.; Ontrup, J.; Haschke, R.; Ritter, H.

2010-01-01

In previous work, a platform was developed for testing computer-vision algorithms for robotic planetary exploration. This platform consisted of a digital video camera connected to a wearable computer for real-time processing of images at geological and astrobiological field sites. The real-time processing included image segmentation and the generation of interest points based upon uncommonness in the segmentation maps. Also in previous work, this platform for testing computer-vision algorithms has been ported to a more ergonomic alternative platform, consisting of a phone camera connected via the Global System for Mobile Communications (GSM) network to a remote-server computer. The wearable-computer platform has been tested at geological and astrobiological field sites in Spain (Rivas Vaciamadrid and Riba de Santiuste), and the phone camera has been tested at a geological field site in Malta. In this work, we (i) apply a Hopfield neural-network algorithm for novelty detection based upon colour, (ii) integrate a field-capable digital microscope on the wearable computer platform, (iii) test this novelty detection with the digital microscope at Rivas Vaciamadrid, (iv) develop a Bluetooth communication mode for the phone-camera platform, in order to allow access to a mobile processing computer at the field sites, and (v) test the novelty detection on the Bluetooth-enabled phone camera connected to a netbook computer at the Mars Desert Research Station in Utah. This systems engineering and field testing have together allowed us to develop a real-time computer-vision system that is capable, for example, of identifying lichens as novel within a series of images acquired in semi-arid desert environments. We acquired sequences of images of geologic outcrops in Utah and Spain consisting of various rock types and colours to test this algorithm. The algorithm robustly recognized previously observed units by their colour, while requiring only a single image or a few images to learn colours as familiar, demonstrating its fast learning capability.

Evaluating the effectiveness of the MASW technique in a geologically complex terrain

NASA Astrophysics Data System (ADS)

Anukwu, G. C.; Khalil, A. E.; Abdullah, K. B.

2018-04-01

MASW surveys carried at a number of sites in Pulau Pinang, Malaysia, showed complicated dispersion curves which consequently made the inversion into soil shear velocity model ambiguous. This research work details effort to define the source of these complicated dispersion curves. As a starting point, the complexity of the phase velocity spectrum is assumed to be due to either the surveying parameters or the elastic properties of the soil structures. For the former, the surveying was carried out using different parameters. The complexities were persistent for the different surveying parameters, an indication that the elastic properties of the soil structure could be the reason. In order to exploit this assumption, a synthetic modelling approach was adopted using information from borehole, literature and geologically plausible models. Results suggest that the presence of irregular variation in the stiffness of the soil layers, high stiffness contrast and relatively shallow bedrock, results in a quite complex f-v spectrum, especially at frequencies lower than 20Hz, making it difficult to accurately extract the dispersion curve below this frequency. As such, for MASW technique, especially in complex geological situations as demonstrated, great care should be taken during the data processing and inversion to obtain a model that accurately depicts the subsurface.

Large Crater Clustering tool

NASA Astrophysics Data System (ADS)

Laura, Jason; Skinner, James A.; Hunter, Marc A.

2017-08-01

In this paper we present the Large Crater Clustering (LCC) tool set, an ArcGIS plugin that supports the quantitative approximation of a primary impact location from user-identified locations of possible secondary impact craters or the long-axes of clustered secondary craters. The identification of primary impact craters directly supports planetary geologic mapping and topical science studies where the chronostratigraphic age of some geologic units may be known, but more distant features have questionable geologic ages. Previous works (e.g., McEwen et al., 2005; Dundas and McEwen, 2007) have shown that the source of secondary impact craters can be estimated from secondary impact craters. This work adapts those methods into a statistically robust tool set. We describe the four individual tools within the LCC tool set to support: (1) processing individually digitized point observations (craters), (2) estimating the directional distribution of a clustered set of craters, back projecting the potential flight paths (crater clusters or linearly approximated catenae or lineaments), (3) intersecting projected paths, and (4) intersecting back-projected trajectories to approximate the local of potential source primary craters. We present two case studies using secondary impact features mapped in two regions of Mars. We demonstrate that the tool is able to quantitatively identify primary impacts and supports the improved qualitative interpretation of potential secondary crater flight trajectories.

Publications - GMC 3 | Alaska Division of Geological & Geophysical Surveys

Science.gov Websites

: Colville Delta State #1; Plaghm Beechey Point #1; Ugnu #1; Simpson Lagoon #32-14; Placid State #1 (3-10-13 Slope Alaska wells: Colville Delta State #1; Plaghm Beechey Point #1; Ugnu #1; Simpson Lagoon #32-14

Publications - GMC 361 | Alaska Division of Geological & Geophysical

Science.gov Websites

DGGS GMC 361 Publication Details Title: X-ray Diffraction Analysis of: Drew Point #1, East Simpson Test , 2009, X-ray Diffraction Analysis of: Drew Point #1, East Simpson Test Well #1, East Simpson #2

Publications - GMC 310 | Alaska Division of Geological & Geophysical

Science.gov Websites

approximations of core (4,309.5'-4,409') from the BP Exploration (Alaska) Inc. Milne Point G-1 well Authors UCS approximations of core (4,309.5'-4,409') from the BP Exploration (Alaska) Inc. Milne Point G-1

Determinants of Clay and Shale Microfabric Signatures: Processes and Mechanisms

DTIC Science & Technology

1991-01-01

macroenvironments . The interplay of geological, chemical, and biological processes and mechanisms during transport, deposition, and burial of...and macroenviron - a function of processes and mechanisms, are antecedent to gain- ments. The interplay of geological, chemical, and biological pro

Brine flow in heated geologic salt.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kuhlman, Kristopher L.; Malama, Bwalya

This report is a summary of the physical processes, primary governing equations, solution approaches, and historic testing related to brine migration in geologic salt. Although most information presented in this report is not new, we synthesize a large amount of material scattered across dozens of laboratory reports, journal papers, conference proceedings, and textbooks. We present a mathematical description of the governing brine flow mechanisms in geologic salt. We outline the general coupled thermal, multi-phase hydrologic, and mechanical processes. We derive these processes governing equations, which can be used to predict brine flow. These equations are valid under a wide varietymore » of conditions applicable to radioactive waste disposal in rooms and boreholes excavated into geologic salt.« less

High resolution hybrid optical and acoustic sea floor maps (Invited)

NASA Astrophysics Data System (ADS)

Roman, C.; Inglis, G.

2013-12-01

This abstract presents a method for creating hybrid optical and acoustic sea floor reconstructions at centimeter scale grid resolutions with robotic vehicles. Multibeam sonar and stereo vision are two common sensing modalities with complementary strengths that are well suited for data fusion. We have recently developed an automated two stage pipeline to create such maps. The steps can be broken down as navigation refinement and map construction. During navigation refinement a graph-based optimization algorithm is used to align 3D point clouds created with both the multibeam sonar and stereo cameras. The process combats the typical growth in navigation error that has a detrimental affect on map fidelity and typically introduces artifacts at small grid sizes. During this process we are able to automatically register local point clouds created by each sensor to themselves and to each other where they overlap in a survey pattern. The process also estimates the sensor offsets, such as heading, pitch and roll, that describe how each sensor is mounted to the vehicle. The end results of the navigation step is a refined vehicle trajectory that ensures the points clouds from each sensor are consistently aligned, and the individual sensor offsets. In the mapping step, grid cells in the map are selectively populated by choosing data points from each sensor in an automated manner. The selection process is designed to pick points that preserve the best characteristics of each sensor and honor some specific map quality criteria to reduce outliers and ghosting. In general, the algorithm selects dense 3D stereo points in areas of high texture and point density. In areas where the stereo vision is poor, such as in a scene with low contrast or texture, multibeam sonar points are inserted in the map. This process is automated and results in a hybrid map populated with data from both sensors. Additional cross modality checks are made to reject outliers in a robust manner. The final hybrid map retains the strengths of both sensors and shows improvement over the single modality maps and a naively assembled multi-modal map where all the data points are included and averaged. Results will be presented from marine geological and archaeological applications using a 1350 kHz BlueView multibeam sonar and 1.3 megapixel digital still cameras.

Monitoring and modelling of landslide and debris flow impact on transport and building infrasructure in the Carpathians

NASA Astrophysics Data System (ADS)

Ivanik, Olena; Shevchuk, Viktor; Yahno, Evgen

2016-04-01

Mechanisms and factors of formation of landslide and debris flow processes are examined in terms of model objects in the Carpathians. The study area is within Eastern Carpathians and Transcarpathian depression (Tisa river basin). There were investigated more than 220 stabilized and active landslides. The analysis of water-gravitational processes in this region with complex heterogeneous geological structure confirmed the priority nature of occurrence of structural landslides in rheologically different geological environments, and made it possible to create a new classification of structural landslides and conditions of their formation with the decisive influence of destructive zones. This classification is the basis for constructing geological, physical and mathematical models of landslide slopes, and subsequent modeling of the landslide hazard based on the determination of the stress-strain state of slopes. Under the proposed mathematical model, the examined phenomenon is described as thermoelastic-plastic equilibrium of the isotropic matrix under effect of applied mass (gravitational field of the Earth) and surface efforts, inhomogeneous stationary temperature field. In addition, it is assumed that the Young modulus at each point of the matrix depends on the water saturation. Debris and mudflows in the Carpathians have a stage character, non-stationary and avalanche movements. The territory is prone to be affected by debris and mudflows, due to the geological, geomorphological and climatic conditions. Therefore the main conditions of the mudflow formation are as follows: the presence of the rock destruction products which could be a solid phase of debris mudflow; presence of the enough quantity of the rainfall runoff for the unconsolidated material removal; ruggedness of relief that provides simultaneous movement of the big values of the water-soil mass with the big velocities. The algorithm calculating the mudflow impact on infrastructure objects in Carpathians has been developed. It based on the empiric data and fundamental hydrodynamic lows, on formula Bernoulli in particular. Using this formula we obtain the expression for the impingement hydrodynamic pressure:

Origins of Sinuous and Braided Channels on Ascraeus Mons, Mars — A Keck Geology Consortium Undergraduate Research Project

NASA Astrophysics Data System (ADS)

de Wet, A. P.; Bleacher, J. E.; Garry, W. B.

2012-03-01

This Keck Geology Consortium project, involving four undergrad geology students, mapped and analyzed sinuous channel features on Ascraeus Mons, Mars, to better understand the role of volcanic and fluvial processes in the geological evolution of Mars.

Use of Bedrock and Geomorphic Mapping Compilations in Assessing Geologic Hazards at Recreation Sites on National Forests in NW California

NASA Astrophysics Data System (ADS)

de La Fuente, J. A.; Bell, A.; Elder, D.; Mowery, R.; Mikulovsky, R.; Klingel, H.; Stevens, M.

2010-12-01

Geologic hazards on US Forest Service lands have a long history of producing catastrophic events. In 1890 (prior to the establishment of the Forest Service), the China Mine landslide buried a miner’s camp along the Trinity River in NW California, killing a number of miners. An earthquake in southwestern Montana triggered a massive landslide which killed 28 people in a US Forest Service campground in 1959. In 1980, Mount St. Helens erupted in Oregon, killing 57 people. Debris flows from a winter storm in 2003 on the burned hillslopes of the San Bernardino National Forest in California killed 14 people at the St. Sophia youth Camp. A rockfall in the summer of 2009 in Lassen National Park killed a 9 year old boy. The most recent catastrophe occurred on June 11, 2010 when 20 people died in a flash flood at the Albert Pike Campground on the Ouachita National Forest. These and other disasters point out the need for geologic hazard mapping and assessments on the National Forests. The US Forest Service (USFS) is currently assessing geologic hazards in the Northern Province of USFS Region 5 (Pacific Southwest Region), which includes the Klamath, Mendocino, Shasta-Trinity, and Six Rivers National Forests. The most common geologic hazards (relatively short return intervals) in this area include landslides, rock falls, debris flows, flooding, temporary dam failures (landslide or woody debris), naturally occurring hazardous materials, (asbestos radon, etc), and rarely, karst subsidence. Seismic and volcanic hazards are also important at longer return intervals. This assessment will be conducted in three phases, and is patterned after a process developed by Region 8 of the US Forest Service. The first phase is a reconnaissance level assessment based on existing information such as spatial databases, aerial photos, Digital Elevation Models, State of California Alquist-Priolo Earthquake Fault Zone maps, previous investigations and anecdotal accounts of past events. The bedrock coverage is a compilation of the best available mapping for all National Forests in California. The geomorphic coverage includes features such as active and dormant landslides, alluvial fans, headwall basins, glacial features, and valley inner gorge. Criteria will be developed which utilize elements of this data to evaluate geologic hazards in the vicinity of developed recreation sites. The second phase will be conducted later and involves site specific analyses focusing on areas identified as higher hazard in the first phase, along with verification and updating of phase 1 findings. The third phase will complete any site level geologic or hydrologic investigations, and wrap up the hazard assessment process. A summary report with hazard maps and recommendations will be prepared at the end of each phase. The overriding goal of this project is to provide sound geologic information to managers so they can use a science-based approach in recognizing and managing geologic hazards at recreation sites.

Health benefits of geologic materials and geologic processes

USGS Publications Warehouse

Finkelman, R.B.

2006-01-01

The reemerging field of Medical Geology is concerned with the impacts of geologic materials and geologic processes on animal and human health. Most medical geology research has been focused on health problems caused by excess or deficiency of trace elements, exposure to ambient dust, and on other geologically related health problems or health problems for which geoscience tools, techniques, or databases could be applied. Little, if any, attention has been focused on the beneficial health effects of rocks, minerals, and geologic processes. These beneficial effects may have been recognized as long as two million years ago and include emotional, mental, and physical health benefits. Some of the earliest known medicines were derived from rocks and minerals. For thousands of years various clays have been used as an antidote for poisons. "Terra sigillata," still in use today, may have been the first patented medicine. Many trace elements, rocks, and minerals are used today in a wide variety of pharmaceuticals and health care products. There is also a segment of society that believes in the curative and preventative properties of crystals (talismans and amulets). Metals and trace elements are being used in some of today's most sophisticated medical applications. Other recent examples of beneficial effects of geologic materials and processes include epidemiological studies in Japan that have identified a wide range of health problems (such as muscle and joint pain, hemorrhoids, burns, gout, etc.) that may be treated by one or more of nine chemically distinct types of hot springs, and a study in China indicating that residential coal combustion may be mobilizing sufficient iodine to prevent iodine deficiency disease. ?? 2006 MDPI. All rights reserved.

Abstracts for the Planetary Geology Field Conference on Aeolian Processes

NASA Technical Reports Server (NTRS)

Greeley, R. (Editor); Black, D. (Editor)

1978-01-01

The Planetary Geology Field Conference on Aeolian Processes was organized at the request of the Planetary Geology Program office of the National Aeronautics and Space Administration to bring together geologists working on aeolian problems on earth and planetologists concerned with similar problems on the planets. Abstracts of papers presented at the conference are arranged herein by alphabetical order of the senior author. Papers fall into three broad categories: (1) Viking Orbiter and Viking Lander results on aeolian processes and/or landforms on Mars, (2) laboratory results on studies of aeolian processes, and (3) photogeology and field studies of aeolian processes on Earth.

Geological Features Mapping Using PALSAR-2 Data in Kelantan River Basin, Peninsular Malaysia

NASA Astrophysics Data System (ADS)

Pour, A. B.; Hashim, M.

2016-09-01

In this study, the recently launched Phased Array type L-band Synthetic Aperture Radar-2 (PALSAR-2) onboard the Advanced Land Observing Satellite-2 (ALOS-2), remote sensing data were used to map geologic structural and topographical features in the Kelantan river basin for identification of high potential risk and susceptible zones for landslides and flooding areas. A ScanSAR and two fine mode dual polarization level 3.1 images cover Kelantan state were processed for comprehensive analysis of major geological structures and detailed characterizations of lineaments, drainage patterns and lithology at both regional and district scales. Red-Green-Blue (RGB) colour-composite was applied to different polarization channels of PALSAR-2 data to extract variety of geological information. Directional convolution filters were applied to the data for identifying linear features in particular directions and edge enhancement in the spatial domain. Results derived from ScanSAR image indicate that lineament occurrence at regional scale was mainly linked to the N-S trending of the Bentong-Raub Suture Zone (BRSZ) in the west and Lebir Fault Zone in the east of the Kelantan state. Combination of different polarization channels produced image maps contain important information related to water bodies, wetlands and lithological units for the Kelantan state using fine mode observation data. The N-S, NE-SW and NNE-SSW lineament trends were identified in the study area using directional filtering. Dendritic, sub-dendritic and rectangular drainage patterns were detected in the Kelantan river basin. The analysis of field investigations data indicate that many of flooded areas were associated with high potential risk zones for hydro-geological hazards such as wetlands, urban areas, floodplain scroll, meander bend, dendritic and sub-dendritic drainage patterns, which are located in flat topograghy regions. Numerous landslide points were located in rectangular drainage system that associated with topographic slope of metamorphic and Quaternary rock units. Some large landslides were associated with N-S, NNE-SSW and NE-SW trending fault zones. Consequently, structural and topographical geology maps were produced for Kelantan river basin using PALSAR-2 data, which could be broadly applicable for landslide hazard mapping and identification of high potential risk zone for hydro-geological hazards.

Geology of the Icy Galilean Satellites: Understanding Crustal Processes and Geologic Histories Through the JIMO Mission

NASA Technical Reports Server (NTRS)

Figueredo, P. H.; Tanaka, K.; Senske, D.; Greeley, R.

2003-01-01

Knowledge of the geology, style and time history of crustal processes on the icy Galilean satellites is necessary to understanding how these bodies formed and evolved. Data from the Galileo mission have provided a basis for detailed geologic and geo- physical analysis. Due to constrained downlink, Galileo Solid State Imaging (SSI) data consisted of global coverage at a -1 km/pixel ground sampling and representative, widely spaced regional maps at -200 m/pixel. These two data sets provide a general means to extrapolate units identified at higher resolution to lower resolution data. A sampling of key sites at much higher resolution (10s of m/pixel) allows evaluation of processes on local scales. We are currently producing the first global geological map of Europa using Galileo global and regional-scale data. This work is demonstrating the necessity and utility of planet-wide contiguous image coverage at global, regional, and local scales.

Visualizing Earth Materials

NASA Astrophysics Data System (ADS)

Cashman, K. V.; Rust, A.; Stibbon, E.; Harris, R.

2016-12-01

Earth materials are fundamental to art. They are pigments, they are clay, they provide form and color. Earth scientists, however, rarely attempt to make the physical properties of Earth materials visible through art, and similarly many artists use Earth materials without fully understanding their physical and chemical properties. Here we explore the intersection between art and science through study of the physical properties of Earth materials as characterized in the laboratory, and as transferred to paper using different techniques and suspending media. One focus of this collaboration is volcanic ash. Ash is interesting scientifically because its form provides information on the fundamental processes that drive volcanic eruptions, and determines its transport properties, and thus its potential to affect populations far downwind of the volcano. Ash properties also affect its behavior as an art material. From an aesthetic point of view, ash lends a granular surface to the image; it is also uncontrollable, and thus requires engagement between artist and medium. More fundamentally, using ash in art creates an exchange between the medium and the subject matter, and imparts something of the physical, visceral experience of volcanic landscapes to the viewer. Another component of this work uses powdered rock as a printing medium for geologic maps. Because different types of rock create powders with different properties (grain size distributions and shapes), the geology is communicated not only as color, but also by the physical characteristics of the material as it interacts with the paper. More importantly, the use of actual rocks samples as printing material for geologic maps not only makes a direct connection between the map and the material it represents, but also provides an emotional connection between the map, the viewer and the landscape, its colors, textures and geological juxtapositions. Both case studies provide examples not only of ways in which artists can help scientists to visualize materials, but also how artists and scientists can work together to learn from each other. To illustrate this point, our poster will provide opportunities for hands on experimentation with earth materials as artistic media.

Digital Bedrock Compilation: A Geodatabase Covering Forest Service Lands in California

NASA Astrophysics Data System (ADS)

Elder, D.; de La Fuente, J. A.; Reichert, M.

2010-12-01

This digital database contains bedrock geologic mapping for Forest Service lands within California. This compilation began in 2004 and the first version was completed in 2005. Second publication of this geodatabase was completed in 2010 and filled major gaps in the southern Sierra Nevada and Modoc/Medicine Lake/Warner Mountains areas. This digital map database was compiled from previously published and unpublished geologic mapping, with source mapping and review from California Geological Survey, the U.S. Geological Survey and others. Much of the source data was itself compilation mapping. This geodatabase is huge, containing ~107,000 polygons and ~ 280,000 arcs. Mapping was compiled from more than one thousand individual sources and covers over 41,000,000 acres (~166,000 km2). It was compiled from source maps at various scales - from ~ 1:4,000 to 1:250,000 and represents the best available geologic mapping at largest scale possible. An estimated 70-80% of the source information was digitized from geologic mapping at 1:62,500 scale or better. Forest Service ACT2 Enterprise Team compiled the bedrock mapping and developed a geodatabase to store this information. This geodatabase supports feature classes for polygons (e.g, map units), lines (e.g., contacts, boundaries, faults and structural lines) and points (e.g., orientation data, structural symbology). Lookup tables provide detailed information for feature class items. Lookup/type tables contain legal values and hierarchical groupings for geologic ages and lithologies. Type tables link coded values with descriptions for line and point attributes, such as line type, line location and point type. This digital mapping is at the core of many quantitative analyses and derivative map products. Queries of the database are used to produce maps and to quantify rock types of interest. These include the following: (1) ultramafic rocks - where hazards from naturally occurring asbestos are high, (2) granitic rocks - increased erosion hazards, (3) limestone, chert, sedimentary rocks - paleontological resources (Potential Fossil Yield Classification maps), (4) calcareous rocks (cave resources, water chemistry), and (5) lava flows - lava tubes (more caves). Map unit groupings (e.g., belts, terranes, tectonic & geomorphic provinces) can also be derived from the geodatabase. Digital geologic mapping was used in ground water modeling to predict effects of tunneling through the San Bernardino Mountains. Bedrock mapping is used in models that characterize watershed sediment regimes and quantify anthropogenic influences. When combined with digital geomorphology mapping, this geodatabase helps to assess landslide hazards.

The Cyborg Astrobiologist: scouting red beds for uncommon features with geological significance

NASA Astrophysics Data System (ADS)

McGuire, Patrick Charles; Díaz-Martínez, Enrique; Ormö, Jens; Gómez-Elvira, Javier; Rodríguez-Manfredi, José Antonio; Sebastián-Martínez, Eduardo; Ritter, Helge; Haschke, Robert; Oesker, Markus; Ontrup, Jörg

2005-04-01

The `Cyborg Astrobiologist' has undergone a second geological field trial, at a site in northern Guadalajara, Spain, near Riba de Santiuste. The site at Riba de Santiuste is dominated by layered deposits of red sandstones. The Cyborg Astrobiologist is a wearable computer and video camera system that has demonstrated a capability to find uncommon interest points in geological imagery in real time in the field. In this second field trial, the computer vision system of the Cyborg Astrobiologist was tested at seven different tripod positions, on three different geological structures. The first geological structure was an outcrop of nearly homogeneous sandstone, which exhibits oxidized-iron impurities in red areas and an absence of these iron impurities in white areas. The white areas in these `red beds' have turned white because the iron has been removed. The iron removal from the sandstone can proceed once the iron has been chemically reduced, perhaps by a biological agent. In one instance the computer vision system found several (iron-free) white spots to be uncommon and therefore interesting, as well as several small and dark nodules. The second geological structure was another outcrop some 600 m to the east, with white, textured mineral deposits on the surface of the sandstone, at the bottom of the outcrop. The computer vision system found these white, textured mineral deposits to be interesting. We acquired samples of the mineral deposits for geochemical analysis in the laboratory. This laboratory analysis of the crust identifies a double layer, consisting of an internal millimetre-size layering of calcite and an external centimetre-size efflorescence of gypsum. The third geological structure was a 50 cm thick palaeosol layer, with fossilized root structures of some plants. The computer vision system also found certain areas of these root structures to be interesting. A quasi-blind comparison of the Cyborg Astrobiologist's interest points for these images with the interest points determined afterwards by a human geologist shows that the Cyborg Astrobiologist concurred with the human geologist 68% of the time (true-positive rate), with a 32% false-positive rate and a 32% false-negative rate. The performance of the Cyborg Astrobiologist's computer vision system was by no means perfect, so there is plenty of room for improvement. However, these tests validate the image-segmentation and uncommon-mapping technique that we first employed at a different geological site (Rivas Vaciamadrid) with somewhat different properties for the imagery.

Planetary Geology: A Teacher's Guide with Activities in Physical and Earth Sciences.

ERIC Educational Resources Information Center

National Aeronautics and Space Administration, Washington, DC.

This educator's guide discusses planetary geology. Exercises are grouped into five units: (1) introduction to geologic processes; (2) impact cratering activities; (3) planetary atmospheres; (4) planetary surfaces; and (5) geologic mapping. Suggested introductory exercises are noted at the beginning of each exercise. Each activity includes an…

Measuring Student Knowledge of Landscapes and Their Formation Timespans

ERIC Educational Resources Information Center

Jolley, Alison; Jones, Francis; Harris, Sara

2013-01-01

Geologic time is a crucial component of any geoscientist's training. Essential knowledge of geologic time includes rates of geologic processes and the associated time it takes for geologic features to form, yet measuring conceptual thinking abilities in these domains is challenging. We describe development and initial application of the Landscape…

Database for the geologic map of Upper Geyser Basin, Yellowstone National Park, Wyoming

USGS Publications Warehouse

Abendini, Atosa A.; Robinson, Joel E.; Muffler, L. J. Patrick; White, D. E.; Beeson, Melvin H.; Truesdell, A. H.

2015-01-01

This dataset contains contacts, geologic units, and map boundaries from Miscellaneous Investigations Series Map I-1371, "The Geologic map of upper Geyser Basin, Yellowstone, National Park, Wyoming". This dataset was constructed to produce a digital geologic map as a basis for ongoing studies of hydrothermal processes.

West Flank Coso, CA FORGE 3D geologic model

DOE Data Explorer

Doug Blankenship

2016-03-01

This is an x,y,z file of the West Flank FORGE 3D geologic model. Model created in Earthvision by Dynamic Graphic Inc. The model was constructed with a grid spacing of 100 m. Geologic surfaces were extrapolated from the input data using a minimum tension gridding algorithm. The data file is tabular data in a text file, with lithology data associated with X,Y,Z grid points. All the relevant information is in the file header (the spatial reference, the projection etc.) In addition all the fields in the data file are identified in the header.

Fallon FORGE 3D Geologic Model

DOE Data Explorer

Doug Blankenship

2016-03-01

An x,y,z scattered data file for the 3D geologic model of the Fallon FORGE site. Model created in Earthvision by Dynamic Graphic Inc. The model was constructed with a grid spacing of 100 m. Geologic surfaces were extrapolated from the input data using a minimum tension gridding algorithm. The data file is tabular data in a text file, with lithology data associated with X,Y,Z grid points. All the relevant information is in the file header (the spatial reference, the projection etc.) In addition all the fields in the data file are identified in the header.

Fluvial processes in Puget Sound rivers and the Pacific Northwest [Chapter 3

Treesearch

John M. Buffington; Richard D. Woodsmith; Derek B. Booth; David R. Montgomery

2003-01-01

The variability of topography, geology, climate; vegetation, and land use in the Pacific Northwest creates considerable spatial and temporal variability of fluvial processes and reach-scale channel type. Here we identify process domains of typical Pacific Northwest watersheds and examine local physiographic and geologic controls on channel processes and response...

Topographic lidar survey of Dauphin Island, Alabama and Chandeleur, Stake, Grand Gosier and Breton Islands, Louisiana, July 12-14, 2013

USGS Publications Warehouse

Guy, Kristy K.; Plant, Nathaniel G.

2014-01-01

This Data Series Report contains lidar elevation data collected on July 12 and 14, 2013, for Dauphin Island, Alabama, and Chandeleur, Stake, Grand Gosier and Breton Islands, Louisiana. Classified point cloud data—data points described in three dimensions—in lidar data exchange format (LAS) and bare earth digital elevation models (DEMs) in ERDAS Imagine raster format (IMG) are available as downloadable files. Photo Science, Inc., was contracted by the U.S. Geological Survey (USGS) to collect and process these data. The lidar data were acquired at a horizontal spacing (or nominal pulse spacing) of 1 meter (m) or less. The USGS surveyed points within the project area from July 14–23, 2013, for use in ground control and accuracy assessment. Photo Science, Inc., calculated a vertical root mean square error (RMSEz) of 0.012 m by comparing 10 surveyed points to an interpolated elevation surface of unclassified lidar data. The USGS also checked the data using 80 surveyed points and unclassified lidar point elevation data and found an RMSEz of 0.073 m. The project specified an RMSEz of 0.0925 m or less. The lidar survey was acquired to document the short- and long-term changes of several different barrier island systems. Specifically, this survey supports detailed studies of Chandeleur and Dauphin Islands that resolve annual changes in beaches, berms and dunes associated with processes driven by storms, sea-level rise, and even human restoration activities. These lidar data are available to Federal, State and local governments, emergency-response officials, resource managers, and the general public.

Geology and resource assessment of Costa Rica at 1:500,000 scale; a digital representation of maps of the U.S. Geological Survey's 1987 Folio I-1865

USGS Publications Warehouse

Schruben, Paul G.

1996-01-01

This CD-ROM contains digital versions of the geology and resource assessment maps of Costa Rica originally published by the U.S. Geological Survey (USGS), the Direccion General de Geologia, Minas e Hidrocarburos, and the Universidad de Costa Rica in 1987 at a scale of 1:500,000 in USGS Folio I-1865. The following layers of the map are available on the CD-ROM: geology, favorable domains for selected deposit types, Bouguer gravity, isostatic gravity, mineral deposits, and rock geochemistry sample points. Some of the layers are provided in the following formats: ArcView 1 for Windows and UNIX, ARC/INFO 6.1.2 Export, Digital Line Graph (DLG) Optional, and Drawing Exchange File (DXF). This CD-ROM was produced in accordance with the ISO 9660 and Apple Computer's HFS standards.

Geology and resource assessment of Costa Rica at 1:500,000 scale; a digital representation of maps of the U.S. Geological Survey's 1987 folio I-1865

USGS Publications Warehouse

Schruben, Paul G.

1997-01-01

This CD-ROM contains digital versions of the geology and resource assessment maps of Costa Rica originally published in USGS Folio I-1865 (U.S. Geological Survey, the Direccion General de Geologia, Minas e Hidrocarburos, and the Universidad de Costa Rica, 1987) at a scale of 1:500,000. The following layers are available on the CD-ROM: geology and faults; favorable domains for selected deposit types; Bouguer gravity data; isostatic gravity contours; mineral deposits, prospects, and occurrences; and rock geochemistry sample points. For DOS users, the CD-ROM contains MAPPER, a user-friendly map display program. Some of the maps are also provided in the following additional formats on the CD-ROM: (1) ArcView 1 and 3, (2) ARC/INFO 6.1.2 Export, (3) Digital Line Graph (DLG) Optional, and (4) Drawing Exchange File (DXF.)

Geologic map of the Jasper Quadrangle, Newton and Boone counties, Arkansas

USGS Publications Warehouse

Hudson, M.R.; Murray, K.E.; Pezzutti, Deborah

2001-01-01

This digital geologic map compilation presents new polygon (i.e., geologic map unit contacts), line (i.e., fault, fold axis, and structure contour), and point (i.e., structural attitude, contact elevations) vector data for the Jasper 7 1/2' quadrangle in northern Arkansas. The map database, which is at 1:24,000-scale resolution, provides geologic coverage of an area of current hydrogeologic, tectonic, and stratigraphic interest. The Jasper quadrangle is located in northern Newton and southern Boone Counties about 20 km south of the town of Harrison. The map area is underlain by sedimentary rocks of Ordovician, Mississippian, and Pennsylvanian age that were mildly deformed by a series of normal and strike-slip faults and folds. The area is representative of the stratigraphic and structural setting of the southern Ozark Dome. The Jasper quadrangle map provides new geologic information for better understanding groundwater flow paths in and adjacent to the Buffalo River watershed.

Geologic map of the Hasty Quadrangle, Boone and Newton Counties, Arkansas

USGS Publications Warehouse

Hudson, Mark R.; Murray, Kyle E.

2004-01-01

This digital geologic map compilation presents new polygon (for example, geologic map unit contacts), line (for example, fault, fold axis, and structure contour), and point (for example, structural attitude, contact elevations) vector data for the Hasty 7.5-minute quadrangle in northern Arkansas. The map database, which is at 1:24,000-scale resolution, provides geologic coverage of an area of current hydrogeologic, tectonic, and stratigraphic interest. The Hasty quadrangle is located in northern Newton and southern Boone Counties about 20 km south of the town of Harrison. The map area is underlain by sedimentary rocks of Ordovician, Mississippian, and Pennsylvanian age that were mildly deformed by a series of normal and strike-slip faults and folds. The area is representative of the stratigraphic and structural setting of the southern Ozark Dome. The Hasty quadrangle map provides new geologic information for better understanding groundwater flow paths in and adjacent to the Buffalo River watershed.

Modes, hydrodynamic processes and ecological impacts exerted by river-groundwater transformation in Junggar Basin, China

NASA Astrophysics Data System (ADS)

Wang, Wenke; Wang, Zhan; Hou, Rongzhe; Guan, Longyao; Dang, Yan; Zhang, Zaiyong; Wang, Hao; Duan, Lei; Wang, Zhoufeng

2018-05-01

The hydrodynamic processes and impacts exerted by river-groundwater transformation need to be studied at regional and catchment scale, especially with respect to diverse geology and lithology. This work adopted an integrated method to study four typical modes (characterized primarily by lithology, flow subsystems, and gaining/losing river status) and the associated hydrodynamic processes and ecological impacts in the southern part of Junggar Basin, China. River-groundwater transformation occurs one to four times along the basin route. For mode classification, such transformation occurs: once or twice, controlled by lithological factors (mode 1); twice, impacted by geomorphic features and lithological structures (mode 2); and three or four times, controlled by both geological and lithological structures (modes 3 and 4). Results also suggest: (1) there exist local and regional groundwater flow subsystems at 400 m depth, which form a multistage nested groundwater flow system. The groundwater flow velocities are 0.1-1.0 and <0.1 m/day for each of two subsystems; (2) the primary groundwater hydro-chemical type takes on apparent horizontal and vertical zoning characteristics, and the TDS of the groundwater evidently increases along the direction of groundwater flow, driven by hydrodynamic processes; (3) the streams, wetland and terminal lakes are the end-points of the local and regional groundwater flow systems. This work indicates that not only are groundwater and river water derived from the same source, but also hydrodynamic and hydro-chemical processes and ecological effects, as a whole in arid areas, are controlled by stream-groundwater transformation.

A GIS based method for soil mapping in Sardinia, Italy: a geomatic approach.

PubMed

Vacca, A; Loddo, S; Melis, M T; Funedda, A; Puddu, R; Verona, M; Fanni, S; Fantola, F; Madrau, S; Marrone, V A; Serra, G; Tore, C; Manca, D; Pasci, S; Puddu, M R; Schirru, P

2014-06-01

A new project was recently initiated for the realization of the "Land Unit and Soil Capability Map of Sardinia" at a scale of 1:50,000 to support land use planning. In this study, we outline the general structure of the project and the methods used in the activities that have been thus far conducted. A GIS approach was used. We used the soil-landscape paradigm for the prediction of soil classes and their spatial distribution or the prediction of soil properties based on landscape features. The work is divided into two main phases. In the first phase, the available digital data on land cover, geology and topography were processed and classified according to their influence on weathering processes and soil properties. The methods used in the interpretation are based on consolidated and generalized knowledge about the influence of geology, topography and land cover on soil properties. The existing soil data (areal and point data) were collected, reviewed, validated and standardized according to international and national guidelines. Point data considered to be usable were input into a specific database created for the project. Using expert interpretation, all digital data were merged to produce a first draft of the Land Unit Map. During the second phase, this map will be implemented with the existing soil data and verified in the field if also needed with new soil data collection, and the final Land Unit Map will be produced. The Land Unit and Soil Capability Map will be produced by classifying the land units using a reference matching table of land capability classes created for this project. Copyright © 2013 Elsevier Ltd. All rights reserved.

Database on unstable rock slopes in Norway

NASA Astrophysics Data System (ADS)

Oppikofer, Thierry; Nordahl, Bo; Bunkholt, Halvor; Nicolaisen, Magnus; Hermanns, Reginald L.; Böhme, Martina; Yugsi Molina, Freddy X.

2014-05-01

Several large rockslides have occurred in historic times in Norway causing many casualties. Most of these casualties are due to displacement waves triggered by a rock avalanche and affecting coast lines of entire lakes and fjords. The Geological Survey of Norway performs systematic mapping of unstable rock slopes in Norway and has detected up to now more than 230 unstable slopes with significant postglacial deformation. This systematic mapping aims to detect future rock avalanches before they occur. The registered unstable rock slopes are stored in a database on unstable rock slopes developed and maintained by the Geological Survey of Norway. The main aims of this database are (1) to serve as a national archive for unstable rock slopes in Norway; (2) to serve for data collection and storage during field mapping; (3) to provide decision-makers with hazard zones and other necessary information on unstable rock slopes for land-use planning and mitigation; and (4) to inform the public through an online map service. The database is organized hierarchically with a main point for each unstable rock slope to which several feature classes and tables are linked. This main point feature class includes several general attributes of the unstable rock slopes, such as site name, general and geological descriptions, executed works, recommendations, technical parameters (volume, lithology, mechanism and others), displacement rates, possible consequences, hazard and risk classification and so on. Feature classes and tables linked to the main feature class include the run-out area, the area effected by secondary effects, the hazard and risk classification, subareas and scenarios of an unstable rock slope, field observation points, displacement measurement stations, URL links for further documentation and references. The database on unstable rock slopes in Norway will be publicly consultable through the online map service on www.skrednett.no in 2014. Only publicly relevant parts of the database will be shown in the online map service (e.g. processed results of displacement measurements), while more detailed data will not (e.g. raw data of displacement measurements). Factsheets with key information on unstable rock slopes can be automatically generated and downloaded for each site, a municipality, a county or the entire country. Selected data will also be downloadable free of charge. The present database on unstable rock slopes in Norway will further evolve in the coming years as the systematic mapping conducted by the Geological Survey of Norway progresses and as available techniques and tools evolve.

Road guide to geological points of interest on the island of Hawaii

NASA Technical Reports Server (NTRS)

Stearns, H. T.; Macdonald, G. A.; Greeley, R.

1974-01-01

This road guide briefly describes the points of geologic interest along the main roads on Hawaii. It begins at Hilo and proceeds around the island in a clockwise direction on State Route 11 to Kailua, then returns to Hilo on State Route 19 to Hilo via Waimea, with side excursions on the other principal roads. Minimum excursion time is two days, allowing only very brief time for the various stops. The return to Hilo from Waimea can be made via Route 19 along the Hamakua Coast (wet, leeward side of island, displaying typical tropical erosion) or via Route 20 over the Humuula Saddle (high, relatively dry and cool; young volcanic features).

Geology

NASA Technical Reports Server (NTRS)

Stewart, R. K.; Sabins, F. F., Jr.; Rowan, L. C.; Short, N. M.

1975-01-01

Papers from private industry reporting applications of remote sensing to oil and gas exploration were presented. Digitally processed LANDSAT images were successfully employed in several geologic interpretations. A growing interest in digital image processing among the geologic user community was shown. The papers covered a wide geographic range and a wide technical and application range. Topics included: (1) oil and gas exploration, by use of radar and multisensor studies as well as by use of LANDSAT imagery or LANDSAT digital data, (2) mineral exploration, by mapping from LANDSAT and Skylab imagery and by LANDSAT digital processing, (3) geothermal energy studies with Skylab imagery, (4) environmental and engineering geology, by use of radar or LANDSAT and Skylab imagery, (5) regional mapping and interpretation, and digital and spectral methods.

Geologic Mapping of the NW Rim of Hellas Basin, Mars

NASA Astrophysics Data System (ADS)

Crown, D. A.; Bleamaster, L. F.; Mest, S. C.; Mustard, J. F.

2009-03-01

Geologic mapping of the NW rim of Hellas basin is providing new constraints on the magnitudes, extents, and history of volatile-driven processes as well as a geologic context for mineralogic identifications.

Integrated geophysical investigations in a fault zone located on southwestern part of İzmir city, Western Anatolia, Turkey

NASA Astrophysics Data System (ADS)

Drahor, Mahmut G.; Berge, Meriç A.

2017-01-01

Integrated geophysical investigations consisting of joint application of various geophysical techniques have become a major tool of active tectonic investigations. The choice of integrated techniques depends on geological features, tectonic and fault characteristics of the study area, required resolution and penetration depth of used techniques and also financial supports. Therefore, fault geometry and offsets, sediment thickness and properties, features of folded strata and tectonic characteristics of near-surface sections of the subsurface could be thoroughly determined using integrated geophysical approaches. Although Ground Penetrating Radar (GPR), Electrical Resistivity Tomography (ERT) and Seismic Refraction Tomography (SRT) methods are commonly used in active tectonic investigations, other geophysical techniques will also contribute in obtaining of different properties in the complex geological environments of tectonically active sites. In this study, six different geophysical methods used to define faulting locations and characterizations around the study area. These are GPR, ERT, SRT, Very Low Frequency electromagnetic (VLF), magnetics and self-potential (SP). Overall integrated geophysical approaches used in this study gave us commonly important results about the near surface geological properties and faulting characteristics in the investigation area. After integrated interpretations of geophysical surveys, we determined an optimal trench location for paleoseismological studies. The main geological properties associated with faulting process obtained after trenching studies. In addition, geophysical results pointed out some indications concerning the active faulting mechanism in the area investigated. Consequently, the trenching studies indicate that the integrated approach of geophysical techniques applied on the fault problem reveals very useful and interpretative results in description of various properties of faulting zone in the investigation site.

Geology. Grade 6. Anchorage School District Elementary Science Program.

ERIC Educational Resources Information Center

Anchorage School District, AK.

This resource book introduces sixth-grade children to the environment by studying rocks and other geological features. Nine lessons are provided on a variety of topics including: (1) geologic processes; (2) mountain building; (3) weathering; (4) geologic history and time; (5) plate tectonics; (6) rocks and minerals; (7) mineral properties; (8)…

30 CFR 580.41 - What types of geological data and information must I submit to BOEM?

Code of Federal Regulations, 2014 CFR

2014-07-01

... (including geochemical) data and information describing each operation of analysis, processing, and... 30 Mineral Resources 2 2014-07-01 2014-07-01 false What types of geological data and information... CONTINENTAL SHELF Data Requirements Geological Data and Information § 580.41 What types of geological data and...

30 CFR 580.41 - What types of geological data and information must I submit to BOEM?

Code of Federal Regulations, 2013 CFR

2013-07-01

... (including geochemical) data and information describing each operation of analysis, processing, and... 30 Mineral Resources 2 2013-07-01 2013-07-01 false What types of geological data and information... CONTINENTAL SHELF Data Requirements Geological Data and Information § 580.41 What types of geological data and...

Status report on the geology of the Oak Ridge Reservation

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hatcher, R.D. Jr.; Lemiszki, P.J.; Foreman, J.L.

1992-10-01

This report provides an introduction to the present state of knowledge of the geology of the Oak Ridge Reservation (ORR) and a cursory introduction to the hydrogeology. An important element of this work is the construction of a modern detailed geologic map of the ORR (Plate 1), which remains in progress. An understanding of the geologic framework of the ORR is essential to many current and proposed activities related to land-use planning, waste management, environmental restoration, and waste remediation. Therefore, this report is also intended to convey the present state of knowledge of the geologic and geohydrologic framework of themore » ORR and vicinity and to present some of the available data that provide the basic framework for additional geologic mapping, subsurface geologic, and geohydrologic studies. In addition, some recently completed, detailed work on soils and other surficial materials is included because of the close relationships to bedrock geology and the need to recognize the weathered products of bedrock units. Weathering processes also have some influence on hydrologic systems and processes at depth.« less

Geologic Resource Evaluation of Pu'uhonua O Honaunau National Historical Park, Hawai'i: Part I, Geology and Coastal Landforms

USGS Publications Warehouse

Richmond, Bruce M.; Cochran, Susan A.; Gibbs, Ann E.

2008-01-01

Geologic resource inventories of lands managed by the National Park Service (NPS) are important products for the parks and are designed to provide scientific information to better manage park resources. Park-specific geologic reports are used to identify geologic features and processes that are relevant to park ecosystems, evaluate the impact of human activities on geologic features and processes, identify geologic research and monitoring needs, and enhance opportunities for education and interpretation. These geologic reports are planned to provide a brief geologic history of the park and address specific geologic issues forming a link between the park geology and the resource manager. The Kona coast National Parks of the Island of Hawai'i are intended to preserve the natural beauty of the Kona coast and protect significant ancient structures and artifacts of the native Hawaiians. Pu'ukohola Heiau National Historic Site (PUHE), Kaloko-Honokohau National Historical Park (KAHO), and Pu'uhonua O Honaunau National Historical Park (PUHO) are three Kona parks studied by the U.S. Geological Survey (USGS) Coastal and Marine Geology Team in cooperation with the National Park Service. This report is one of six related reports designed to provide geologic and benthic-habitat information for the three Kona parks. Each geology and coastal-landform report describes the regional geologic setting of the Hawaiian Islands, gives a general description of the geology of the Kona coast, and presents the geologic setting and issues for one of the parks. The related benthic-habitat mapping reports discuss the marine data and habitat classification scheme, and present results of the mapping program. Pu'uhonua O Honaunau National Historical Park ('Place of Refuge of Honaunau') is the southernmost of the three National Parks located on the leeward Kona coast of the Island of Hawai'i. It is a relatively small park originally 73 ha (182 acres), and was expanded in 2006 with the acquisition of an additional 96 ha (238 acres). The park is probably best known for the pu'uhonua (place of refuge) native Hawaiian cultural site. In addition to the pu'uhonua, the park contains palace grounds, royal fishponds, burial sites, prehistoric trails, a royal canoe landing area, stone house platforms and associated temple structures. A massive basalt rock wall (300 m long, 3 m high, and 5 m wide) separates the pu'uhonua from the areas used by Hawaiian royalty and other grounds. Honaunau Bay is a popular marine resource area adjacent to the park. The seaward-sloping lands of PUHO lie at the base of Mauna Loa volcano, which forms a bench of low-lying pahoehoe lava flows at Pu'uhonua Point. The park coastline is approximately 1.6 km long and is mostly rocky with the exception of a small artificially nourished beach at Keone'ele Cove at the northern boundary next to Honaunau Bay. The park is bounded to the south by Ki'ilae Bay and includes the coastal portions of three Hawaiian land divisions (ahupua'a): Honaunau, Keokea, and Ki'ilae. The western boundary is the high tide mark. The waters of Keone'ele Cove, the ancient royal canoe landing at PUHO, while not formally under NPS jurisdiction, are managed by the park under an agreement with the State of Hawai'i. This small embayment is a known haven for sea turtles, which are often found sunning themselves on the nearshore volcanic platform. Impacts to this area include frequent visits by scuba divers and snorkelers to Honaunau Bay and a small boat ramp located just to the north of Keone'ele Cove. There is an accompanying report that presents the results of benthic habitat mapping of the offshore waters for PUHO (Cochran and others, 2006b; linked below). They mapped from the shoreline to depths of approximately 40 m, where the shelf drops off to a sand-covered bottom. PUHO park boundaries extend only to the mean high-tide level; however, landscape impacts created by development around the park are of concern to

Integration of seafloor point data in usSEABED

USGS Publications Warehouse

Reid, Jane A.; Williams, S. Jeffress; Zimmermann, Mark; Jenkins, Chris; Golden, Nadine E.

2007-01-01

Sediments of the beach, nearshore, and continental shelves record a complex interplay of processes including wave energy and direction , currents, beach erosion or accretion, bluff or cliff retreat, fluvial input, sediment longshore and cross-shelf transport processes, contaminant content and transport, sediment sources and sinks, and others. In turn, sediments and rocks modify wave patterns, affect recreation and tourism, and provide habitat for fish, epifauna, and infauna. Character of the surficial seafloor also influences navigation, commercial and recreational fishing and gathering of other food sources, communication, piplines, national defense, and provides geologic resources including sand and gravel aggregates, minerals, and real or potential energy sources. The beaches, nearshore, and continental margins fall under overlapping levels of managerial responsibility between Federal, State, regional, and local government agencies and consortia. In addition, universities and other academic institutions investigate these places for pure or applied scientific reasons. Mapping is usually the first step in understanding any issue and is often comprised of remotely gathered geophysical data such as bathymetry and backscatter imagery, and groundtruthing; that is, the collection of physical and virtual samples to tie the remotely gathered data to reality. The physical samples are described and (or) carefully analyzed for grain-size information -- which records both the site's physical conditions and geologic past -- and commonly, for constituent components such as mineral and rock types (to determine onland sources and in situ chemical processes), carbonate and organic content and microfossils (for biological and oceanographic influences), and structure such as layering and bioturbation (for physical influences). The samples may also be subjected to physical tests such as comp[action analyses, liquefaction or plasticity limits, ans other parameters important when considering construction of offshore structures. In recent years, virtual sampling of the seafloor has become popular, through the use of towed video or photographic equipment and the addition of camera to oceanographic equipment such as corers and tripods. Before about ten years ago, most maps were made by hand. Recently, with the advent of desktop GIS packages, map making and resource analysis can be done nearly "on-the-fly" if geographically located data exist. While the problems of projection, scale, and resolution of digitized paper maps are commonly known amongst GIS-users, access to the original underlying point data allows for maps to be regenerated for digital use using statistically proven methods, provides increasing data density by including multiple studies, as well as allows the point data to be used in other ways than just mapping. These point data may be available in raw or refined or in worded descriptions. Raw data such as granulometric analyses can be manipulated through the use of known equations or empirical relationships to provide information about other parameters of the sediment, such as mean grainsize, sorting, erodability, or rugosity. If refined data are presented such as gravel, sand, and mud percentages, the parameter noted earlier may be estimated. In the case of worded descriptions, values for geologic terms can be assigned, for example, "fine sand" equate to 0.2 mm sized particles, to provide numeric terms for GIS or modeling purposes.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Leetaru, Hannes

This report describes a process and provides seed information for identifying and evaluating risks pertinent to a hypothetical carbon dioxide (CO{sub 2}) capture and sequestration (CCS) project. In the envisioned project, the target sequestration reservoir rock is the Potosi Formation of the Knox Supergroup. The Potosi is identified as a potential target formation because (1) at least locally, it contains vuggy to cavernous layers that have very high porosity, and (2) it is present in areas where the deeper Mt. Simon Sandstone (a known potential reservoir unit) is absent or nonporous. The key report content is discussed in Section 3.3,more » which describes two lists of Features, Events, and Processes (FEPs) that should be considered during the design stage of such a project. These lists primarily highlight risk elements particular to the establishment of the Potosi as the target formation in general. The lists are consciously incomplete with respect to risk elements that would be relevant for essentially all CCS projects regardless of location or geology. In addition, other risk elements specific to a particular future project site would have to be identified. Sources for the FEPs and scenarios listed here include the iconic Quintessa FEPs list developed for the International Energy Agency Greenhouse Gas (IEAGHG) Programme; previous risk evaluation projects executed by Schlumberger Carbon Services; and new input solicited from experts currently working on aspects of CCS in the Knox geology. The projects used as sources of risk information are primarily those that have targeted carbonate reservoir rocks similar in age, stratigraphy, and mineralogy to the Knox-Potosi. Risks of using the Potosi Formation as the target sequestration reservoir for a CCS project include uncertainties about the levels of porosity and permeability of that rock unit; the lateral consistency and continuity of those properties; and the ability of the project team to identify suitable (i.e., persistently porous and permeable) injection depths within the overall formation. Less direct implications include the vertical position of the Potosi within the rock column and the absence of a laterally extensive shale caprock immediately overlying the Potosi. Based on modeling work done partly in association with this risk report, risks that should also be evaluated include the ability of available methods to predict and track the development of a CO{sub 2} plume as it migrates away from the injection point(s). The geologic and hydrodynamic uncertainties present risks that are compounded at the stage of acquiring necessary drilling and injection permits. It is anticipated that, in the future, a regional geologic study or CO{sub 2}-emitter request may identify a small specific area as a prospective CCS project site. At that point, the FEPs lists provided in this report should be evaluated by experts for their relative levels of risk. A procedure for this evaluation is provided. The higher-risk FEPs should then be used to write project-specific scenarios that may themselves be evaluated for risk. Then, actions to reduce and to manage risk can be described and undertaken. The FEPs lists provided as Appendix 2 should not be considered complete, as potentially the most important risks are ones that have not yet been thought of. But these lists are intended to include the most important risk elements pertinent to a Potosi-target CCS project, and they provide a good starting point for diligent risk identification, evaluation, and management.« less

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hnottavange-Telleen, Ken; Leetaru, Hannes

This report describes a process and provides seed information for identifying and evaluating risks pertinent to a hypothetical carbon dioxide (CO2) capture and sequestration (CCS) project. In the envisioned project, the target sequestration reservoir rock is the Potosi Formation of the Knox Supergroup. The Potosi is identified as a potential target formation because (1) at least locally, it contains vuggy to cavernous layers that have very high porosity, and (2) it is present in areas where the deeper Mt. Simon Sandstone (a known potential reservoir unit) is absent or nonporous. The key report content is discussed in Section 3.3, whichmore » describes two lists of Features, Events, and Processes (FEPs) that should be considered during the design stage of such a project. These lists primarily highlight risk elements particular to the establishment of the Potosi as the target formation in general. The lists are consciously incomplete with respect to risk elements that would be relevant for essentially all CCS projects regardless of location or geology. In addition, other risk elements specific to a particular future project site would have to be identified. Sources for the FEPs and scenarios listed here include the iconic Quintessa FEPs list developed for the International Energy Agency Greenhouse Gas (IEAGHG) Programme; previous risk evaluation projects executed by Schlumberger Carbon Services; and new input solicited from experts currently working on aspects of CCS in the Knox geology. The projects used as sources of risk information are primarily those that have targeted carbonate reservoir rocks similar in age, stratigraphy, and mineralogy to the Knox-Potosi. Risks of using the Potosi Formation as the target sequestration reservoir for a CCS project include uncertainties about the levels of porosity and permeability of that rock unit; the lateral consistency and continuity of those properties; and the ability of the project team to identify suitable (i.e., persistently porous and permeable) injection depths within the overall formation. Less direct implications include the vertical position of the Potosi within the rock column and the absence of a laterally extensive shale caprock immediately overlying the Potosi. Based on modeling work done partly in association with this risk report, risks that should also be evaluated include the ability of available methods to predict and track the development of a CO2 plume as it migrates away from the injection point(s). The geologic and hydrodynamic uncertainties present risks that are compounded at the stage of acquiring necessary drilling and injection permits. It is anticipated that, in the future, a regional geologic study or CO2-emitter request may identify a small specific area as a prospective CCS project site. At that point, the FEPs lists provided in this report should be evaluated by experts for their relative levels of risk. A procedure for this evaluation is provided. The higher-risk FEPs should then be used to write project-specific scenarios that may themselves be evaluated for risk. Then, actions to reduce and to manage risk can be described and undertaken. The FEPs lists provided as Appendix 2 should not be considered complete, as potentially the most important risks are ones that have not yet been thought of. But these lists are intended to include the most important risk elements pertinent to a Potosi-target CCS project, and they provide a good starting point for diligent risk identification, evaluation, and management.« less

Engineering geological mapping in Wallonia (Belgium) : present state and recent computerized approach

NASA Astrophysics Data System (ADS)

Delvoie, S.; Radu, J.-P.; Ruthy, I.; Charlier, R.

2012-04-01

An engineering geological map can be defined as a geological map with a generalized representation of all the components of a geological environment which are strongly required for spatial planning, design, construction and maintenance of civil engineering buildings. In Wallonia (Belgium) 24 engineering geological maps have been developed between the 70s and the 90s at 1/5,000 or 1/10,000 scale covering some areas of the most industrialized and urbanized cities (Liège, Charleroi and Mons). They were based on soil and subsoil data point (boring, drilling, penetration test, geophysical test, outcrop…). Some displayed data present the depth (with isoheights) or the thickness (with isopachs) of the different subsoil layers up to about 50 m depth. Information about geomechanical properties of each subsoil layer, useful for engineers and urban planners, is also synthesized. However, these maps were built up only on paper and progressively needed to be updated with new soil and subsoil data. The Public Service of Wallonia and the University of Liège have recently initiated a study to evaluate the feasibility to develop engineering geological mapping with a computerized approach. Numerous and various data (about soil and subsoil) are stored into a georelational database (the geotechnical database - using Access, Microsoft®). All the data are geographically referenced. The database is linked to a GIS project (using ArcGIS, ESRI®). Both the database and GIS project consist of a powerful tool for spatial data management and analysis. This approach involves a methodology using interpolation methods to update the previous maps and to extent the coverage to new areas. The location (x, y, z) of each subsoil layer is then computed from data point. The geomechanical data of these layers are synthesized in an explanatory booklet joined to maps.

Mapping Arid Vegetation Species Distributions in the White Mountains, Eastern California, Using AVIRIS, Topography, and Geology

NASA Technical Reports Server (NTRS)

VandeVen, C.; Weiss, S. B.

2001-01-01

Our challenge is to model plant species distributions in complex montane environments using disparate sources of data, including topography, geology, and hyperspectral data. From an ecologist's point of view, species distributions are determined by local environment and disturbance history, while spectral data are 'ancillary.' However, a remote sensor's perspective says that spectral data provide picture of what vegetation is there, topographic and geologic data are ancillary. In order to bridge the gap, all available data should be used to get the best possible prediction of species distributions using complex multivariate techniques implemented on a GIS. Vegetation reflects local climatic and nutrient conditions, both of which can be modeled, allowing predictive mapping of vegetation distributions. Geologic substrate strongly affects chemical, thermal, and physical properties of soils, while climatic conditions are determined by local topography. As elevation increases, precipitation increases and temperature decreases. Aspect, slope, and surrounding topography determine potential insolation, so that south-facing slopes are warmer and north-facing slopes cooler at a given elevation. Topographic position (ridge, slope, canyon, or meadow) and slope angle affect sediment accumulation and soil depth. These factors combine as complex environmental gradients, and underlie many features of plant distributions. Airborne Visible/Infrared Imaging Spectrometer (AVIRIS) data, digital elevation models, digitized geologic maps, and 378 ground control points were used to predictively map species distributions in the central and southern White Mountains, along the western boundary of the Basin and Range province. Minimum Noise Fraction (MNF) bands were calculated from the visible and near-infrared AVIRIS bands, and combined with digitized geologic maps and topographic variables using Canonical Correspondence Analysis (CCA). CCA allows for modeling species 'envelopes' in multidimensional environmental space, which can then be projected across entire landscapes.

Aniakchak National Monument and Preserve: Geologic resources inventory report

USGS Publications Warehouse

Hults, Chad P.; Neal, Christina

2015-01-01

This GRI report is a companion document to previously completed GRI digital geologic map data. It was written for resource managers to support science-informed decision making. It may also be useful for interpretation. The report was prepared using available geologic information, and the NPS Geologic Resources Division conducted no new fieldwork in association with its preparation. Sections of the report discuss distinctive geologic features and processes within the park, highlight geologic issues facing resource managers, describe the geologic history leading to the present-day landscape, and provide information about the GRI geologic map data. A poster illustrates these data. The Map Unit Properties Table summarizes report content for each geologic map unit.

Geodiversity of the Umbria region (central Italy): a GIS-based quantitative index

NASA Astrophysics Data System (ADS)

Melelli, Laura; Pica, Alessia; Del Monte, Maurizio

2014-05-01

The measure of natural range related to geological bedrock, landforms and geomorphological processes is the necessary starting point to geodiversity evaluation. Geodiversity plays a strategic role in landscape management. Whereas geotourism and geosites are identified as a driving power for the scientific and economic promotion of an area, the geodiversity knowledge is required for a complete and accurate research. For example, high values of this abiotic parameter identify and support the foundation of geoparks. According to this perspective, the geodiversity is the unifying factor for these areas of interest. While a subjective and qualitative approach may be adequate for geosites definition, identification and cultural promotion, the geodiversity concept needs a different evaluation method. A quantitative procedure allows achieving an objective and repeatable process exportable in different geographic units. Geographical Information Systems and spatial analysis techniques are the base to quantitative evaluation involving topographic, geological and geomorphological data. Therefore, the assessment of a numerical index derived from the overlay of spatial parameters can be conveniently computed in GIS environment. In this study, a geodiversity index is proposed where geological, geomorphological and landcover factors deriving mainly from maps and field survey; topographic ones are employed from DEM and remote sensed data. Each abiotic parameter is modelled in a grid format; focal functions do provide neighbourhood analysis and computing variety statistics. A particular extent is dedicated to topographic information and terrain roughness, that are strictly related to efficiency of geomorphological processes and generally corresponding to the abiotic components variability. The study area is located in central Italy and is characterized by a well known natural heritage. Thirty-seven geosites are detected in the Umbria region, where seven regional and one natural parks are present. All the area shows a strong correlation between the geological setting and the relief energy associated to topography assessment. Three main outcrop complexes are present: a fluvial lacustrine, where the lowest slope values and plain area are widespread; a terrigenous one, with a medium slope value; and a calcareous complex corresponding to the mountain areas and the highest amplitude of relief. This partition matches different geomorphological processes and landforms, ensuring a widespread distribution of geodiversity. The final map is a digital data that localizes areas with, respectively, null or minimum, medium, and high geodiversity values. The highest class overlaps to geosites areas, to high values of amplitude of relief and where the geomorphological processes are more effective and various. This confirms the method accuracy. The results obtained represent an important advancement in geodiversity research and a significant instrument for economic development and conservation management.

Sea-floor geology and character offshore of Rocky Point, New York

USGS Publications Warehouse

Poppe, L.J.; McMullen, K.Y.; Ackerman, S.D.; Blackwood, D.S.; Irwin, B.J.; Schaer, J.D.; Lewit, P.G.; Doran, E.F.

2010-01-01

The U.S. Geological Survey (USGS), the Connecticut Department of Environmental Protection, and the National Oceanic and Atmospheric Administration (NOAA) have been working cooperatively to interpret surficial sea-floor geology along the coast of the Northeastern United States. NOAA survey H11445 in eastern Long Island Sound, offshore of Plum Island, New York, covers an area of about 12 square kilometers. Multibeam bathymetry and sidescan-sonar imagery from the survey, as well as sediment and photographic data from 13 stations occupied during a USGS verification cruise are used to delineate sea-floor features and characterize the environment. Bathymetry gradually deepens offshore to over 100 meters in a depression in the northwest part of the study area and reaches 60 meters in Plum Gut, a channel between Plum Island and Orient Point. Sand waves are present on a shoal north of Plum Island and in several smaller areas around the basin. Sand-wave asymmetry indicates that counter-clockwise net sediment transport maintains the shoal. Sand is prevalent where there is low backscatter in the sidescan-sonar imagery. Gravel and boulder areas are submerged lag deposits produced from the Harbor Hill-Orient Point-Fishers Island moraine segment and are found adjacent to the shorelines and just north of Plum Island, where high backscatter is present in the sidescan-sonar imagery.

Geodetic monitoring of subrosion-induced subsidence processes in urban areas

NASA Astrophysics Data System (ADS)

Kersten, Tobias; Kobe, Martin; Gabriel, Gerald; Timmen, Ludger; Schön, Steffen; Vogel, Detlef

2017-03-01

The research project SIMULTAN applies an advanced combination of geophysical, geodetic, and modelling techniques to gain a better understanding of the evolution and characteristics of sinkholes. Sinkholes are inherently related to surface deformation and, thus, of increasing societal relevance, especially in dense populated urban areas. One work package of SIMULTAN investigates an integrated approach to monitor sinkhole-related mass translations and surface deformations induced by salt dissolution. Datasets from identical and adjacent points are used for a consistent combination of geodetic and geophysical techniques. Monitoring networks are established in Hamburg and Bad Frankenhausen (Thuringia). Levelling surveys indicate subsidence rates of about 4-5 mm per year in the main subsidence areas of Bad Frankenhausen with a local maximum of 10 mm per year around the leaning church tower. Here, the concept of combining geodetic and gravimetric techniques to monitor and characterise geological processes on and below the Earth's surface is exemplary discussed for the focus area Bad Frankenhausen. For the different methods (levelling, GNSS, relative/absolute gravimetry) stable network results at identical points are obtained by the first campaigns, i.e., the results are generally in agreement.

Geologic processes influence the effects of mining on aquatic ecosystems

USGS Publications Warehouse

Schmidt, Travis S.; Clements, William H.; Wanty, Richard B.; Verplanck, Philip L.; Church, Stan E.; San Juan, Carma A.; Fey, David L.; Rockwell, Barnaby W.; DeWitt, Ed H.; Klein, Terry L.

2012-01-01

Geologic processes strongly influence water and sediment quality in aquatic ecosystems but rarely are geologic principles incorporated into routine biomonitoring studies. We test if elevated concentrations of metals in water and sediment are restricted to streams downstream of mines or areas that may discharge mine wastes. We surveyed 198 catchments classified as “historically mined” or “unmined,” and based on mineral-deposit criteria, to determine whether water and sediment quality were influenced by naturally occurring mineralized rock, by historical mining, or by a combination of both. By accounting for different geologic sources of metals to the environment, we were able to distinguish aquatic ecosystems limited by metals derived from natural processes from those due to mining. Elevated concentrations of metals in water and sediment were not restricted to mined catchments; depauperate aquatic communities were found in unmined catchments. The type and intensity of hydrothermal alteration and the mineral deposit type were important determinants of water and sediment quality as well as the aquatic community in both mined and unmined catchments. This study distinguished the effects of different rock types and geologic sources of metals on ecosystems by incorporating basic geologic processes into reference and baseline site selection, resulting in a refined assessment. Our results indicate that biomonitoring studies should account for natural sources of metals in some geologic environments as contributors to the effect of mines on aquatic ecosystems, recognizing that in mining-impacted drainages there may have been high pre-mining background metal concentrations.

Measuring novices' field mapping abilities using an in-class exercise based on expert task analysis

NASA Astrophysics Data System (ADS)

Caulkins, J. L.

2010-12-01

We are interested in developing a model of expert-like behavior for improving the teaching methods of undergraduate field geology. Our aim is to assist students in mastering the process of field mapping more efficiently and effectively and to improve their ability to think creatively in the field. To examine expert-mapping behavior, a cognitive task analysis was conducted with expert geologic mappers in an attempt to define the process of geologic mapping (i.e. to understand how experts carry out geological mapping). The task analysis indicates that expert mappers have a wealth of geologic scenarios at their disposal that they compare against examples seen in the field, experiences that most undergraduate mappers will not have had. While presenting students with many geological examples in class may increase their understanding of geologic processes, novices still struggle when presented with a novel field situation. Based on the task analysis, a short (45-minute) paper-map-based exercise was designed and tested with 14 pairs of 3rd year geology students. The exercise asks students to generate probable geologic models based on a series of four (4) data sets. Each data set represents a day’s worth of data; after the first “day,” new sheets simply include current and previously collected data (e.g. “Day 2” data set includes data from “Day 1” plus the new “Day 2” data). As the geologic complexity increases, students must adapt, reject or generate new geologic models in order to fit the growing data set. Preliminary results of the exercise indicate that students who produced more probable geologic models, and produced higher ratios of probable to improbable models, tended to go on to do better on the mapping exercises at the 3rd year field school. These results suggest that those students with more cognitively available geologic models may be more able to use these models in field settings than those who are unable to draw on these models for whatever reason. Giving students practice at generating geologic models to explain data may be useful in preparing our students for field mapping exercises.

Beam-hardening correction by a surface fitting and phase classification by a least square support vector machine approach for tomography images of geological samples

NASA Astrophysics Data System (ADS)

Khan, F.; Enzmann, F.; Kersten, M.

2015-12-01

In X-ray computed microtomography (μXCT) image processing is the most important operation prior to image analysis. Such processing mainly involves artefact reduction and image segmentation. We propose a new two-stage post-reconstruction procedure of an image of a geological rock core obtained by polychromatic cone-beam μXCT technology. In the first stage, the beam-hardening (BH) is removed applying a best-fit quadratic surface algorithm to a given image data set (reconstructed slice), which minimizes the BH offsets of the attenuation data points from that surface. The final BH-corrected image is extracted from the residual data, or the difference between the surface elevation values and the original grey-scale values. For the second stage, we propose using a least square support vector machine (a non-linear classifier algorithm) to segment the BH-corrected data as a pixel-based multi-classification task. A combination of the two approaches was used to classify a complex multi-mineral rock sample. The Matlab code for this approach is provided in the Appendix. A minor drawback is that the proposed segmentation algorithm may become computationally demanding in the case of a high dimensional training data set.

In-ground operation of Geothermic Fuel Cells for unconventional oil and gas recovery

NASA Astrophysics Data System (ADS)

Sullivan, Neal; Anyenya, Gladys; Haun, Buddy; Daubenspeck, Mark; Bonadies, Joseph; Kerr, Rick; Fischer, Bernhard; Wright, Adam; Jones, Gerald; Li, Robert; Wall, Mark; Forbes, Alan; Savage, Marshall

2016-01-01

This paper presents operating and performance characteristics of a nine-stack solid-oxide fuel cell combined-heat-and-power system. Integrated with a natural-gas fuel processor, air compressor, reactant-gas preheater, and diagnostics and control equipment, the system is designed for use in unconventional oil-and-gas processing. Termed a ;Geothermic Fuel Cell; (GFC), the heat liberated by the fuel cell during electricity generation is harnessed to process oil shale into high-quality crude oil and natural gas. The 1.5-kWe SOFC stacks are packaged within three-stack GFC modules. Three GFC modules are mechanically and electrically coupled to a reactant-gas preheater and installed within the earth. During operation, significant heat is conducted from the Geothermic Fuel Cell to the surrounding geology. The complete system was continuously operated on hydrogen and natural-gas fuels for ∼600 h. A quasi-steady operating point was established to favor heat generation (29.1 kWth) over electricity production (4.4 kWe). Thermodynamic analysis reveals a combined-heat-and-power efficiency of 55% at this condition. Heat flux to the geology averaged 3.2 kW m-1 across the 9-m length of the Geothermic Fuel Cell-preheater assembly. System performance is reviewed; some suggestions for improvement are proposed.

Expanding biological data standards development processes for US IOOS: visual line transect observing community for mammal, bird, and turtle data

USGS Publications Warehouse

Fornwall, M.; Gisiner, R.; Simmons, S. E.; Moustahfid, Hassan; Canonico, G.; Halpin, P.; Goldstein, P.; Fitch, R.; Weise, M.; Cyr, N.; Palka, D.; Price, J.; Collins, D.

2012-01-01

The US Integrated Ocean Observing System (IOOS) has recently adopted standards for biological core variables in collaboration with the US Geological Survey/Ocean Biogeographic Information System (USGS/OBIS-USA) and other federal and non-federal partners. In this Community White Paper (CWP) we provide a process to bring into IOOS a rich new source of biological observing data, visual line transect surveys, and to establish quality data standards for visual line transect observations, an important source of at-sea bird, turtle and marine mammal observation data. The processes developed through this exercise will be useful for other similar biogeographic observing efforts, such as passive acoustic point and line transect observations, tagged animal data, and mark-recapture (photo-identification) methods. Furthermore, we suggest that the processes developed through this exercise will serve as a catalyst for broadening involvement by the larger marine biological data community within the goals and processes of IOOS.

Constructing a Geology Ontology Using a Relational Database

NASA Astrophysics Data System (ADS)

Hou, W.; Yang, L.; Yin, S.; Ye, J.; Clarke, K.

2013-12-01

In geology community, the creation of a common geology ontology has become a useful means to solve problems of data integration, knowledge transformation and the interoperation of multi-source, heterogeneous and multiple scale geological data. Currently, human-computer interaction methods and relational database-based methods are the primary ontology construction methods. Some human-computer interaction methods such as the Geo-rule based method, the ontology life cycle method and the module design method have been proposed for applied geological ontologies. Essentially, the relational database-based method is a reverse engineering of abstracted semantic information from an existing database. The key is to construct rules for the transformation of database entities into the ontology. Relative to the human-computer interaction method, relational database-based methods can use existing resources and the stated semantic relationships among geological entities. However, two problems challenge the development and application. One is the transformation of multiple inheritances and nested relationships and their representation in an ontology. The other is that most of these methods do not measure the semantic retention of the transformation process. In this study, we focused on constructing a rule set to convert the semantics in a geological database into a geological ontology. According to the relational schema of a geological database, a conversion approach is presented to convert a geological spatial database to an OWL-based geological ontology, which is based on identifying semantics such as entities, relationships, inheritance relationships, nested relationships and cluster relationships. The semantic integrity of the transformation was verified using an inverse mapping process. In a geological ontology, an inheritance and union operations between superclass and subclass were used to present the nested relationship in a geochronology and the multiple inheritances relationship. Based on a Quaternary database of downtown of Foshan city, Guangdong Province, in Southern China, a geological ontology was constructed using the proposed method. To measure the maintenance of semantics in the conversation process and the results, an inverse mapping from the ontology to a relational database was tested based on a proposed conversation rule. The comparison of schema and entities and the reduction of tables between the inverse database and the original database illustrated that the proposed method retains the semantic information well during the conversation process. An application for abstracting sandstone information showed that semantic relationships among concepts in the geological database were successfully reorganized in the constructed ontology. Key words: geological ontology; geological spatial database; multiple inheritance; OWL Acknowledgement: This research is jointly funded by the Specialized Research Fund for the Doctoral Program of Higher Education of China (RFDP) (20100171120001), NSFC (41102207) and the Fundamental Research Funds for the Central Universities (12lgpy19).

Autonomous Segmentation of Outcrop Images Using Computer Vision and Machine Learning

NASA Astrophysics Data System (ADS)

Francis, R.; McIsaac, K.; Osinski, G. R.; Thompson, D. R.

2013-12-01

As planetary exploration missions become increasingly complex and capable, the motivation grows for improved autonomous science. New capabilities for onboard science data analysis may relieve radio-link data limits and provide greater throughput of scientific information. Adaptive data acquisition, storage and downlink may ultimately hold implications for mission design and operations. For surface missions, geology remains an essential focus, and the investigation of in place, exposed geological materials provides the greatest scientific insight and context for the formation and history of planetary materials and processes. The goal of this research program is to develop techniques for autonomous segmentation of images of rock outcrops. Recognition of the relationships between different geological units is the first step in mapping and interpreting a geological setting. Applications of automatic segmentation include instrument placement and targeting and data triage for downlink. Here, we report on the development of a new technique in which a photograph of a rock outcrop is processed by several elementary image processing techniques, generating a feature space which can be interrogated and classified. A distance metric learning technique (Multiclass Discriminant Analysis, or MDA) is tested as a means of finding the best numerical representation of the feature space. MDA produces a linear transformation that maximizes the separation between data points from different geological units. This ';training step' is completed on one or more images from a given locality. Then we apply the same transformation to improve the segmentation of new scenes containing similar materials to those used for training. The technique was tested using imagery from Mars analogue settings at the Cima volcanic flows in the Mojave Desert, California; impact breccias from the Sudbury impact structure in Ontario, Canada; and an outcrop showing embedded mineral veins in Gale Crater on Mars. These initial results show promising performance in segmenting images, including multi-class scenes with complex boundaries. In particular, the system was able to learn to distinguish between successive layers of volcanic deposits, including massive basalts overlaying lahar materials. It was also able to separate clasts from ground mass in outcrops of impact breccia, and to find veins of hydrated material within a clay-bearing host rock. The tests also reveal initial details about the types of visual information relevant to segmentation of these types of scenes, providing guidance for further development of the technique. Funding for this work was provided in part by the Canadian Astrobiology Training Program. A portion of this research was performed at the Jet Propulsion Laboratory, California Institute of Technology. Copyright 2013 The University of Western Ontario. All Rights Reserved.

Phase transition and flow-rate behavior of merging granular flows.

PubMed

Hu, Mao-Bin; Liu, Qi-Yi; Jiang, Rui; Hou, Meiying; Wu, Qing-Song

2015-02-01

Merging of granular flows is ubiquitous in industrial, mining, and geological processes. However, its behavior remains poorly understood. This paper studies the phase transition and flow-rate behavior of two granular flows merging into one channel. When the main channel is wider than the side channel, the system shows a remarkable two-sudden-drops phenomenon in the outflow rate when gradually increasing the main inflow. When gradually decreasing the main inflow, the system shows obvious hysteresis phenomenon. We study the flow-rate-drop phenomenon by measuring the area fraction and the mean velocity at the merging point. The phase diagram of the system is also presented to understand the occurrence of the phenomenon. We find that the dilute-to-dense transition occurs when the area fraction of particles at the joint point exceeds a critical value ϕ(c)=0.65±0.03.

Quaternary geology and geomorphology of the lower Deschutes River Canyon, Oregon.

Treesearch

Jim E. O' Connor; Janet H. Curran; Robin A. Beebee; Gordon E. Grant; Andrei Sarna-Wojcicki

2003-01-01

The morphology of the Deschutes River canyon downstream of the Pelton-Round Butte dam complex is the product of the regional geologic history, the composition of the geologic units that compose the valley walls, and Quaternary processes and events. Geologic units within the valley walls and regional deformation patterns control overall valley morphology. Valley bottom...

A 3D object-based model to simulate highly-heterogeneous, coarse, braided river deposits

NASA Astrophysics Data System (ADS)

Huber, E.; Huggenberger, P.; Caers, J.

2016-12-01

There is a critical need in hydrogeological modeling for geologically more realistic representation of the subsurface. Indeed, widely-used representations of the subsurface heterogeneity based on smooth basis functions such as cokriging or the pilot-point approach fail at reproducing the connectivity of high permeable geological structures that control subsurface solute transport. To realistically model the connectivity of high permeable structures of coarse, braided river deposits, multiple-point statistics and object-based models are promising alternatives. We therefore propose a new object-based model that, according to a sedimentological model, mimics the dominant processes of floodplain dynamics. Contrarily to existing models, this object-based model possesses the following properties: (1) it is consistent with field observations (outcrops, ground-penetrating radar data, etc.), (2) it allows different sedimentological dynamics to be modeled that result in different subsurface heterogeneity patterns, (3) it is light in memory and computationally fast, and (4) it can be conditioned to geophysical data. In this model, the main sedimentological elements (scour fills with open-framework-bimodal gravel cross-beds, gravel sheet deposits, open-framework and sand lenses) and their internal structures are described by geometrical objects. Several spatial distributions are proposed that allow to simulate the horizontal position of the objects on the floodplain as well as the net rate of sediment deposition. The model is grid-independent and any vertical section can be computed algebraically. Furthermore, model realizations can serve as training images for multiple-point statistics. The significance of this model is shown by its impact on the subsurface flow distribution that strongly depends on the sedimentological dynamics modeled. The code will be provided as a free and open-source R-package.

Analysis of the Geologic Structure and Compilation of the Geologic Map of the Northern Part of Planet Venus

NASA Astrophysics Data System (ADS)

Basilevsky, A. T.; Burba, G. A.; Ivanov, M. A.; Bobina, N. N.; Shashkina, V. P.; Head, J. W.

Based on an analysis of the images of the Venusian surface obtained by the side-looking radar of the Magellan orbiter, a geologic map of the northern part of Venus (the region extending to the north of the 35°N latitude) at 1 : 10 000 000 scale is compiled. The map of this vast territory, comprising one-fifth of the planet surface, was compiled using only 12 geologic units, which implies a uniform character of terrains and land- forms on the investigated territory and, therefore, the uniformity of geologic processes that occurred on this planet. These units are the products of four main groups of geologic processes that occurred on Venus during the last 0.51 Myr: (1) basaltic volcanism; (2) tectonic compression and tensile deformation; (3) impact crater- ing; and (4) wind-related mobilization, transportation, and deposition of loose fine-grained materials. Basaltic volcanism is the main process that supplies new material on the surface of Venus. Tectonic deformation struc- tures, superposed on the material of different geologic units, determined the morphology of the units and formed the surfaces of unconformity between neighboring units. Ten of 12 geologic units form an age sequence that is virtually identical over the entire mapped territory of the planet. The possible incon- sistency of this sequence caused by anomalous relations existing between smooth plains (Ps) in the southeastern part of Lakshmi Planum and wrinkle ridged plains (Pwr) in the northern part of Sedna Planitia does not destroy this sequence as a whole. The results of our mapping support the model of global stratigraphy of Venus proposed by Basilevsky and Head (19951998) and provide evidence of the quasi-synchronous character of single-type geologic units on different areas of Venus rather than of the absence of synchronism. An analysis of the distribution of impact craters on different geologic units has shown the proximity of mean absolute ages of the material of the surface of Pwr plains, of the entire studied territory, and of the entire Venusian surface. The results of our analysis suggest that, within the area under study, the intensity of the leading geologic processes at the beginning of the studied segment of the geologic history was relatively high but decreased dramatically later.

Collection and analysis of high-resolution elevation data for the Lincoln Lidar Project, Lincoln, Nebraska, 2004

USGS Publications Warehouse

Meyer, P.D.; Greenlee, Susan K.; Gesch, Dean B.; Hubl, Erik J.; Axmann, Ryan N.

2005-01-01

The Lincoln Lidar Project was a partnership developed between the U.S. Geological Survey National Center for Earth Resources Observations and Science (EROS), Lancaster County and the city of Lincoln, Nebraska. This project demonstrated a successful planning, collection, analysis and integration of high-resolution elevation information using Light Detection and Ranging, (Lidar) data. This report describes the partnership developed to collect local Lidar data and transform the data into information useable at local to national levels. This report specifically describes project planning, quality assurance, processing, transforming raw Lidar points to useable data layers, and visualizing and disseminating the raw and final products.

Terrestrial-based lidar beach topography of Fire Island, New York, June 2014

USGS Publications Warehouse

Brenner, Owen T.; Hapke, Cheryl J.; Lee, Kathryn G.; Kimbrow, Dustin R.

2016-02-19

The U.S. Geological Survey (USGS) St. Petersburg Coastal and Marine Science Center (SPCMSC) in Florida and the USGS Lower Mississippi-Gulf Water Science Center (LMG WSC) in Montgomery, Alabama, collaborated to gather alongshore terrestrial-based lidar beach elevation data at Fire Island, New York. This high-resolution elevation dataset was collected on June 11, 2014, to characterize beach topography and document ongoing beach evolution and recovery, and is part of the ongoing beach monitoring within the Hurricane Sandy Supplemental Project GS2-2B. This USGS data series includes the resulting processed elevation point data (xyz) and an interpolated digital elevation model (DEM).

Planetary maps

USGS Publications Warehouse

,

1992-01-01

An important goal of the USGS planetary mapping program is to systematically map the geology of the Moon, Mars, Venus, and Mercury, and the satellites of the outer planets. These geologic maps are published in the USGS Miscellaneous Investigations (I) Series. Planetary maps on sale at the USGS include shaded-relief maps, topographic maps, geologic maps, and controlled photomosaics. Controlled photomosaics are assembled from two or more photographs or images using a network of points of known latitude and longitude. The images used for most of these planetary maps are electronic images, obtained from orbiting television cameras, various optical-mechanical systems. Photographic film was only used to map Earth's Moon.

30 CFR 551.11 - Submission, inspection, and selection of geological data and information collected under a permit...

Code of Federal Regulations, 2014 CFR

2014-07-01

..., or interpretation of any geological data and information. Initial analysis and processing are the stages of analysis or processing where the data and information first become available for in-house... geochemical) data and information describing each operation of analysis, processing, and interpretation; (2...

30 CFR 580.40 - When do I notify BOEM that geological data and information are available for submission...

Code of Federal Regulations, 2014 CFR

2014-07-01

... initial analysis, processing, or interpretation of any geological data and information. Initial analysis and processing are the stages of analysis or processing where the data and information first become... information are available for submission, inspection, and selection? 580.40 Section 580.40 Mineral Resources...

30 CFR 551.11 - Submission, inspection, and selection of geological data and information collected under a permit...

Code of Federal Regulations, 2012 CFR

2012-07-01

..., or interpretation of any geological data and information. Initial analysis and processing are the stages of analysis or processing where the data and information first become available for in-house... geochemical) data and information describing each operation of analysis, processing, and interpretation; (2...

30 CFR 580.40 - When do I notify BOEM that geological data and information are available for submission...

Code of Federal Regulations, 2012 CFR

2012-07-01

... initial analysis, processing, or interpretation of any geological data and information. Initial analysis and processing are the stages of analysis or processing where the data and information first become... information are available for submission, inspection, and selection? 580.40 Section 580.40 Mineral Resources...

30 CFR 551.11 - Submission, inspection, and selection of geological data and information collected under a permit...

Code of Federal Regulations, 2013 CFR

2013-07-01

..., or interpretation of any geological data and information. Initial analysis and processing are the stages of analysis or processing where the data and information first become available for in-house... geochemical) data and information describing each operation of analysis, processing, and interpretation; (2...

30 CFR 580.40 - When do I notify BOEM that geological data and information are available for submission...

Code of Federal Regulations, 2013 CFR

2013-07-01

... initial analysis, processing, or interpretation of any geological data and information. Initial analysis and processing are the stages of analysis or processing where the data and information first become... information are available for submission, inspection, and selection? 580.40 Section 580.40 Mineral Resources...

30 CFR 280.40 - When do I notify MMS that geological data and information are available for submission...

Code of Federal Regulations, 2011 CFR

2011-07-01

... complete the initial analysis, processing, or interpretation of any geological data and information. Initial analysis and processing are the stages of analysis or processing where the data and information... information are available for submission, inspection, and selection? 280.40 Section 280.40 Mineral Resources...

Spreading Geodiversity awareness in schools through field trips and ICT

NASA Astrophysics Data System (ADS)

Magagna, Alessandra; Giardino, Marco; Ferrero, Elena

2014-05-01

Geodiversity, unlike Biodiversity, is not a topic included in the Italian schools curriculum. Nevertheless, Geomorphology is taught at all levels, and it seems to be the right tool for introducing the students to the concepts related to Geodiversity. In this context, a research on the use of field trips and Information and Communication Technologies (ICT) is being carried out for spreading the value of Geodiversity in Secondary Schools. Relevant international literature states that field trips are effective didactic tools for Earth Science education, because they stimulate an active learning process and allow students to appreciate the geological complexity of an area. On the other side, ICT allow students to get knowledge about the variety of landforms of their own territory by staying indoor, using virtual field trips and free software like Google Earth, Google Maps, Bing etc. In order to connect the two strategies, an innovative educational project is proposed here; it involves both the indoor and the outdoor activities, by enhancing a critical approach to the complexity of geological processes. As a starting point, a multimedia product on 20 Italian geological tours, designed for analyzing Geodiversity at a regional scale, has been tested with teachers and students, in order to understand its effectiveness by using it solely indoor. In a second phase, teachers and students have been proposed to compare and integrate indoor and outdoor activities to approach Geodiversity directly at a local scale, by means of targeted field trips. For achieving this goal, during the field trips, students used their mobile devices (smartphone and tablet) equipped with free and/or open source applications (Epicollect, Trimble Outdoor Navigator). These tools allow to track field trips, to gather data (geomorphological observations and related photographs), and to elaborate them in the laboratory; a process useful for reasoning on concepts such as spatial and temporal scales and for comparing the real and the virtual experience. Particularly, the geological history of an Alpine Piedmont area West of Torino (NW Italy) has been investigated. A one-day educational field trip has been performed starting from the man-made features of the Sangano town, walking on the present-day, historical and pre-historical fluvial landforms of the Sangone River, and finally climbing up the Pleistocene glacial landforms of the Rivoli-Avigliana Morainic Amphitheatre. The track offers samples of the Geodiversity of the area by showing a variety of landforms and including panoramic views to the Alpine chain. Students collected geomorphological data and carried out research-type activities, such as mapping and describing landforms, making hypotheses on geomorphic processes and gathering useful elements for the reconstruction of the geological history of the area. By taking awareness of the spatial and temporal scales related to landforms and geomorphic processes, as well as to the Man-Nature interactions, students realize the "dynamic dimension" of Geodiversity. As a consequence, students can perceive the geomorphological landscape as a changeable system over time, and therefore worthy of protection.

Sedimentary Geology Context and Challenges for Cyberinfrastructure Data Management

NASA Astrophysics Data System (ADS)

Chan, M. A.; Budd, D. A.

2014-12-01

A cyberinfrastructure data management system for sedimentary geology is crucial to multiple facets of interdisciplinary Earth science research, as sedimentary systems form the deep-time framework for many geoscience communities. The breadth and depth of the sedimentary field spans research on the processes that form, shape and affect the Earth's sedimentary crust and distribute resources such as hydrocarbons, coal, and water. The sedimentary record is used by Earth scientists to explore questions such as the continental crust evolution, dynamics of Earth's past climates and oceans, evolution of the biosphere, and the human interface with Earth surface processes. Major challenges to a data management system for sedimentary geology are the volume and diversity of field, analytical, and experimental data, along with many types of physical objects. Objects include rock samples, biological specimens, cores, and photographs. Field data runs the gamut from discrete location and spatial orientation to vertical records of bed thickness, textures, color, sedimentary structures, and grain types. Ex situ information can include geochemistry, mineralogy, petrophysics, chronologic, and paleobiologic data. All data types cover multiple order-of-magnitude scales, often requiring correlation of the multiple scales with varying degrees of resolution. The stratigraphic framework needs dimensional context with locality, time, space, and depth relationships. A significant challenge is that physical objects represent discrete values at specific points, but measured stratigraphic sections are continuous. In many cases, field data is not easily quantified, and determining uncertainty can be difficult. Despite many possible hurdles, the sedimentary community is anxious to embrace geoinformatic resources that can provide better tools to integrate the many data types, create better search capabilities, and equip our communities to conduct high-impact science at unprecedented levels.

Notes on the availability of mid-Atlantic multichannel seismic reflection profiles 11 and 12-A, -B, -C, and -D

USGS Publications Warehouse

Schlee, John Stevens

1978-01-01

Available are two multichannel profiles collected by Digicon Geophysical Corporation in 1975 using a 48-channel streamer (3600 m long). and a 27.9 cu. liter air gun array. They were processed in Denver on the Phoenix "I" by William C. Patterson. The processing included demultiplexing and resampling, geometry and common-depth-point definition, velocity analysis, noise muting, band-pass filtering, time-variant filtering, time-variant deconvolution, and automatic gain control (AGC) scaling, prior to the final profile playout.The release includes parts of two lines off the mid-atlantic continental margin (see map) over the Baltimore Canyon trough. These profiles were collected as part of a regional grid over the offshore Atlantic sedimentary basins, as a part of a continuing program to assess the resource potential using non-proprietary data Line 11 is a cross shelf profile (233 ken long) taken across the shelf, slope and upper rise off Virginia (southern Baltimore Canyon trough). Line 12 (shotpoint 1Ol- 6011, parts A, 8, C and D) is an along-the-shelf profiler and stretches from the Cape Hatteras IPOD line to line 2, at the northern part of the Baltimore Canyon trough), a distance of 591 km.These profiles may be viewed at the U.S. Geological Survey, Atlantic Gulf of Mexico, Office of Marine Geology, Quissett campus, Building B, Woods Hole, Massachusetts 02543, and at the U.S. Geological Survey, Branch of Oil and Gas Resources, Denver Federal Center, Building 25, Denver. Colorado 80225. Copies of the profiles can be purchased from the Nations Geophysical and Solar-Terrestrial Data Center, Environmental Data Service- NOAA, Code D621 Boulder, Colorado 80303.

Geologic map of the Skull Creek Quadrangle, Moffat County Colorado

USGS Publications Warehouse

Van Loenen, R. E.; Selner, Gary; Bryant, W.A.

1999-01-01

The Skull Creek quadrangle is in northwestern Colorado a few miles north of Rangely. The prominent structural feature of the Skull Creek quadrangle is the Skull Creek monocline. Pennsylvanian rocks are exposed along the axis of the monocline while hogbacks along its southern flank expose rocks that are from Permian to Upper Cretaceous in age. The Wolf Creek monocline and the Wolf Creek thrust fault, which dissects the monocline, are salient structural features in the northern part of the quadrangle. Little or no mineral potential exists within the quadrangle. A geologic map of the Lazy Y Point quadrangle, which is adjacent to the Skull Creek quadrangle on the west, is also available (Geologic Investigations Series I-2646). This companian map shows similar geologic features, including the western half of the Skull Creek monocline. The geology of this quadrangle was mapped because of its proximity to Dinosaur National Monument. It is adjacent to quadrangles previously mapped to display the geology of this very scenic and popular National Monument. The Skull Creek quadrangle includes parts of the Skull Creek Wilderness Study Area, which was assessed for its mineral resource potential.

Using geologic structures to constrain constitutive laws not accessible in the laboratory

USGS Publications Warehouse

Nevitt, Johanna; Warren, Jessica M.; Kumamoto, Kathryn M.; Pollard, David D.

2018-01-01

In this essay, we explore a central problem of structural geology today, and in the foreseeable future, which is the determination of constitutive laws governing rock deformation to produce geologic structures. Although laboratory experiments provide much needed data and insights about constitutive laws, these experiments cannot cover the range of conditions and compositions relevant to the formation of geologic structures. We advocate that structural geologists address this limitation by interpreting natural experiments, documented with field and microstructural data, using continuum mechanical models that enable the deduction of constitutive laws. To put this procedure into a historical context, we review the founding of structural geology by James Hutton in the late 18th century, and the seminal contributions to continuum mechanics from Newton to Cauchy that provide the tools to model geologic structures. The procedure is illustrated with two examples drawn from recent and on-going field investigations of crustal and mantle lithologies. We conclude by pointing to future research opportunities that will engage structural geologists in the pursuit of constitutive laws during the 21st century.

Episodic sediment-discharge events in Cascade Springs, southern Black Hills, South Dakota

USGS Publications Warehouse

Hayes, Timothy Scott

1999-01-01

Cascade Springs is a group of artesian springs in the southern Black Hills, South Dakota, with collective flow of about 19.6 cubic feet per second. Beginning on February 28, 1992, a large discharge of red suspended sediment was observed from two of the six known discharge points. Similar events during 1906-07 and 1969 were documented by local residents and newspaper accounts. Mineralogic and grain-size analyses were performed to identify probable subsurface sources of the sediment. Geochemical modeling was performed to evaluate the geochemical evolution of water discharged from Cascade Springs. Interpretations of results provide a perspective on the role of artesian springs in the regional geohydrologic framework. X-ray diffraction mineralogic analyses of the clay fraction of the suspended sediment were compared to analyses of clay-fraction samples taken from nine geologic units at and stratigraphically below the spring-discharge points. Ongoing development of a subsurface breccia pipe(s) in the upper Minnelusa Formation and/or Opeche Shale was identified as a likely source of the suspended sediment; thus, exposed breccia pipes in lower Hell Canyon were examined. Upper Minnelusa Formation breccia pipes in lower Hell Canyon occur in clusters similar to the discrete discharge points of Cascade Springs. Grain-size analyses showed that breccia masses lack clay fractions and have coarser distributions than the wall rocks, which indicates that the red, fine-grained fractions have been carried out as suspended sediment. These findings support the hypothesis that many breccia pipes were formed as throats of abandoned artesian springs. Geochemical modeling was used to test whether geochemical evolution of ground water is consistent with this hypothesis. The evolution of water at Cascade Springs could not be suitably simulated using only upgradient water from the Minnelusa aquifer. A suitable model involved dissolution of anhydrite accompanied by dedolomitization in the upper Minnelusa Formation, which is caused by upward leakage of relatively fresh water from the Madison aquifer. The anhydrite dissolution and dedolomitization account for the net removal of minerals that would lead to breccia pipe formation by gravitational collapse. Breccia pipes in the lower Minnelusa Formation are uncommon; however, networks of interconnected breccia layers and breccia dikes are common. These networks, along with vertical fractures and faults, are likely pathways for transmitting upward leakage from the Madison aquifer. It is concluded that suspended sediment discharged at Cascade Springs probably results from episodic collapse brecciation that is caused by subsurface dissolution of anhydrite beds and cements of the upper Minnelusa Formation, accompanied by replacement of dolomite by calcite. It is further concluded that many breccia pipes probably are the throats of artesian springs that have been abandoned and exposed by erosion. The locations of artesian spring-discharge points probably have been shifting outwards from the center of the Black Hills uplift, essentially keeping pace with regional erosion over geologic time. Thus, artesian springflow probably is a factor in controlling water levels in the Madison and Minnelusa aquifers, with hydraulic head declining over geologic time, in response to development of new discharge points. Development of breccia pipes as throats of artesian springs would greatly enhance vertical hydraulic conductivity in the immediate vicinity of spring-discharge points. Horizontal hydraulic conductivity in the Minnelusa Formation also may be enhanced by dissolution processes related to upward leakage from the Madison aquifer. Potential processes could include dissolution resulting from leakage in the vicinity of breccia pipes that are abandoned spring throats, active spring discharge, development of subsurface breccias with no visible surface expression or spring discharge, as well as general areal leakage

Molecular and isotopic analyses of the hydrocarbon gases within gas hydrate-bearing rock units of the Prudhoe Bay-Kuparuk River area in northern Alaska

USGS Publications Warehouse

Valin, Zenon C.; Collett, Timothy S.

1992-01-01

Gas hydrates, which are crystalline substances of water molecules that encase gas molecules, have the potential for being a significant source of natural gas. World-wide estimates for the amount of gas contained in hydrates range from 1.1 x 105 to 2.7 x 108 trillion cubic feet. Gas hydrates exist in many Arctic regions, including the North Slope of Alaska. The two primary objectives of the U.S. Geological Survey Gas Hydrate Research Project are (1) to map the distribution of in-situ gas hydrates on the North Slope of Alaska, and (2) to evaluate the geologic parameters that control the distribution of these gas hydrates. To aid in this study, British Petroleum Exploration, ARCO Alaska, Exxon Company USA, and the Continental Oil Company allowed the U.S. Geological Survey to collect geochemical samples from drilling North Slope production wells. Molecular analysis of gaseous drill cutting and free-flowing gas samples from 10 production wells drilled in the Prudhoe Bay, Kuparuk River, and Milne Point oil fields indicates that methane is the primary hydrocarbon gas in the gas hydrate-bearing stratigraphic units. Isotopic data for several of these rock units indicate that the methane within the inferred gas hydrate occurences originated from both microbial and thermogenic processes.

Contribution to Estimating Bearing Capacity of Pile in Clayey Soils

NASA Astrophysics Data System (ADS)

Drusa, Marián; Gago, Filip; Vlček, Jozef

2016-12-01

The estimation of real geotechnical parameters is key factor for safe and economic design of geotechnical structures. One of these are pile foundations, which require proper design and evaluation due to accessing more deep foundation soil and because remediation work of not bearable piles or broken piles is a crucial operation. For this reason, geotechnical field testing like cone penetration test (CPT), standard penetration (SPT) or dynamic penetration test (DP) are realized in order to receive continuous information about soil strata. Comparing with rotary core drilling type of survey with sampling, these methods are more progressive. From engineering geologist point of view, it is more important to know geological characterization of locality but geotechnical engineers have more interest above the real geotechnical parameters of foundation soils. The role of engineering geologist cannot be underestimated because important geological processes in origin or during history can explain behaviour of a geological environment. In effort to streamline the survey, investigation by penetration tests is done as it is able to provide enough information for designers. This paper deals with actual trends in pile foundation design; because there are no new standards and usable standards are very old. Estimation of the bearing capacity of a single pile can be demonstrated on the example of determination of the cone factor Nk from CPT testing. Then results were compared with other common methods.

Cognitive Factors Affecting Student Understanding of Geologic Time.

ERIC Educational Resources Information Center

Dodick, Jeff; Orion, Nir

2003-01-01

Presents a model that describes how students reconstruct geological transformations over time. Defines the critical factors influencing reconstructive thinking: (1) the transformation scheme, which influences the other diachronic schemes; (2) knowledge of geological processes; and (3) extracognitive factors. (Author/KHR)

Additive Construction using Basalt Regolith Fines

NASA Technical Reports Server (NTRS)

Mueller, Robert P.; Sibille, Laurent; Hintze, Paul E.; Lippitt, Thomas C.; Mantovani, James G.; Nugent, Matthew W.; Townsend, Ivan I.

2014-01-01

Planetary surfaces are often covered in regolith (crushed rock), whose geologic origin is largely basalt. The lunar surface is made of small-particulate regolith and areas of boulders located in the vicinity of craters. Regolith composition also varies with location, reflecting the local bedrock geology and the nature and efficiency of the micrometeorite-impact processes. In the lowland mare areas (suitable for habitation), the regolith is composed of small granules (20 - 100 microns average size) of mare basalt and volcanic glass. Impacting micrometeorites may cause local melting, and the formation of larger glassy particles, and this regolith may contain 10-80% glass. Studies of lunar regolith are traditionally conducted with lunar regolith simulant (reconstructed soil with compositions patterned after the lunar samples returned by Apollo). The NASA Kennedy Space Center (KSC) Granular Mechanics & Regolith Operations (GMRO) lab has identified a low fidelity but economical geo-technical simulant designated as Black Point-1 (BP-1). It was found at the site of the Arizona Desert Research and Technology Studies (RATS) analog field test site at the Black Point lava flow in adjacent basalt quarry spoil mounds. This paper summarizes activities at KSC regarding the utilization of BP-1 basalt regolith and comparative work with lunar basalt simulant JSC-1A as a building material for robotic additive construction of large structures. In an effort to reduce the import or in-situ fabrication of binder additives, we focused this work on in-situ processing of regolith for construction in a single-step process after its excavation. High-temperature melting of regolith involves techniques used in glassmaking and casting (with melts of lower density and higher viscosity than those of metals), producing basaltic glass with high durability and low abrasive wear. Most Lunar simulants melt at temperatures above 1100 C, although melt processing of terrestrial regolith at 1500 C is not uncommon. These temperatures are achievable by laser heating or by using solar concentrators. Similar to volcanic magma, the cooling rate determines the crystallite size - slower cooling develops larger crystals, and rapid quenching can result in fully amorphous glass.

Students' Understanding of Large Numbers as a Key Factor in Their Understanding of Geologic Time

ERIC Educational Resources Information Center

Cheek, Kim A.

2012-01-01

An understanding of geologic time is comprised of 2 facets. Events in Earth's history can be placed in relative and absolute temporal succession on a vast timescale. Rates of geologic processes vary widely, and some occur over time periods well outside human experience. Several factors likely contribute to an understanding of geologic time, one of…

Structural control of landslides. A regional approach based on a developed ArcGIS tool

NASA Astrophysics Data System (ADS)

Ilinca, Viorel; Sandric, Ionut; Chitu, Zenaida; Jurchescu, Marta

2016-04-01

The relationship between bedding planes and topographic slopes plays a major role in controlling landslide mechanisms. The catastrophic nature of many landslides around the Globe was proved to have a relevant structural background. This paper aims at analyzing the relationship between the spatial distribution of landslides and geological structure and lithology at a regional scale (1:50,000). Moreover, by automatizing a well known method to assess the influence of bedding planes on landslide occurence, this study further provides a GIS-based tool useful to speed up regional analyses, when study areas extend over hundreds or thousands of square kilometers. Three areas with different geological and geomorphological features and extents ranging from 70 to 179 km² were selected as case-studies. The sites are located in the Southern Carpathians, the Curvature and the Getic Subcarpathians of Romania. Computation of the topography - bedding plane relation required the following three phases: i) data acquisition, ii) developing a tool for an easy data processing and analysis and iii) testing the tool on the few selected sites having different geological and geomorphological settings. Three categories of spatial data were acquired: i) landslide inventory data; ii) detailed lithological data and iii) data related to geological structure (dip angle and dip direction point data). The landslide database was built based on interpretation of aerial images and field mapping during a more than 8 years long period. Lithology was extracted from geological maps at a 1:50,000 scale, while dip angle and dip direction data were obtained both from geological maps and direct measurements in the field meant to increase the level of detail. In order to rapidly identify the type of slope in relation to the geological structure (anaclinal, cataclinal and orthoclinal), a tool was developed which integrates a well-known index called TOBIA. This custom created GIS tool was developed using Python programming language and Numpy library and is available both as an ArcGIS Toolbox and as a standalone python script. Both are available at http://www.github.com/sandricionut/tobia. Preliminary results for the three analysed areas stress the influence of the geological structure on landslide occurence. In monoclinal areas the relationship between the geological structure and spatial distribution of landslide is very obvious. In slightly folded areas the relationship does not appear to be so evident, nevertheless the influence of the structure can be seen on the flanks of some anticline and syncline structures. In faulted areas, landslides occurence do not seem to be influenced by structure and the majority of the landslides occur in a diversity of directions. Even if landslides are a common process in all of these areas, their occurrence is strictly depending on the presence of lithological formations in a clayey or a marly facies. The new ArcGIS-tool is a useful instrument, facilitating the work involved in the TOBIA computation by reducing the investigation time. The resulted classiffied slopes can be rapidly incorporated as a favorability factor in landslide susceptibility prediction.

3D Geological Mapping - uncovering the subsurface to increase environmental understanding

NASA Astrophysics Data System (ADS)

Kessler, H.; Mathers, S.; Peach, D.

2012-12-01

Geological understanding is required for many disciplines studying natural processes from hydrology to landscape evolution. The subsurface structure of rocks and soils and their properties occupies three-dimensional (3D) space and geological processes operate in time. Traditionally geologists have captured their spatial and temporal knowledge in 2 dimensional maps and cross-sections and through narrative, because paper maps and later two dimensional geographical information systems (GIS) were the only tools available to them. Another major constraint on using more explicit and numerical systems to express geological knowledge is the fact that a geologist only ever observes and measures a fraction of the system they study. Only on rare occasions does the geologist have access to enough real data to generate meaningful predictions of the subsurface without the input of conceptual understanding developed from and knowledge of the geological processes responsible for the deposition, emplacement and diagenesis of the rocks. This in turn has led to geology becoming an increasingly marginalised science as other disciplines have embraced the digital world and have increasingly turned to implicit numerical modelling to understand environmental processes and interactions. Recent developments in geoscience methodology and technology have gone some way to overcoming these barriers and geologists across the world are beginning to routinely capture their knowledge and combine it with all available subsurface data (of often highly varying spatial distribution and quality) to create regional and national geological three dimensional geological maps. This is re-defining the way geologists interact with other science disciplines, as their concepts and knowledge are now expressed in an explicit form that can be used downstream to design process models structure. For example, groundwater modellers can refine their understanding of groundwater flow in three dimensions or even directly parameterize their numerical models using outputs from 3D mapping. In some cases model code is being re-designed in order to deal with the increasing geological complexity expressed by Geologists. These 3D maps contain have inherent uncertainty, just as their predecessors, 2D geological maps had, and there remains a significant body of work to quantify and effectively communicate this uncertainty. Here we present examples of regional and national 3D maps from Geological Survey Organisations worldwide and how these are being used to better solve real-life environmental problems. The future challenge for geologists is to make these 3D maps easily available in an accessible and interoperable form so that the environmental science community can truly integrate the hidden subsurface into a common understanding of the whole geosphere.

Physical exploration for uranium during 1951 in the Silver Reef district, Washington County, Utah

USGS Publications Warehouse

Stugard, Frederick

1954-01-01

During 1951 a joint exploration program of the most promising uraniferous areas in the Silver Reef district was made by the U.S. Geological Survey and the U.S. atomic Energy Commission. A U.S. Bureau of Mines drill crew, on contract to the Atomic Energy Commission, did 2,450 feet of diamond drilling under the geological supervision of the U.S. Geological Survey. The purpose of the drilling was to delineate broadly the favorable ground for commercial development of the uranium deposits. Ten drill holes were located around Pumpkin Point, which is the northeastern end of Buckeye Reef, to probe for extensions of small ore sheets mined on the Point in fine-grained sandstones of the Chinle formation. Three additional holes were located around Tecumseh Hill to probe for extensions of the small showings of uranium-bearing rocks of Buckeye Reef. Only one trace of uranium mineral was detected in the 13 drill holes by logging of drill cores, gamma-ray logging of the holes, and analysis of many core splits from favorable lithology. Extensive traversing with Geiger counters throughout the district and detailed geologic mapping of areas on Buckeye Reef and on East Reef indicate that the chances of discovering significant uranium deposits in the Silver Reef district are very poor, because of: highly variable lithology, closely faulted structure, and obliteration of the shallow uranium-bearing lenses by silver mining. Most of the available ore in the district was in the Pumpkin Point area and has been mined during 1950 to 1953. No ore reserves can be computed for the district before further development work. The most favorable remaining area in the district is now being explored by the operators with Atomic Energy Commission supervision.

Specific storage volumes: A useful tool for CO2 storage capacity assessment

USGS Publications Warehouse

Brennan, S.T.; Burruss, R.C.

2006-01-01

Subsurface geologic strata have the potential to store billions of tons of anthropogenic CO2; therefore, geologic carbon sequestration can be an effective mitigation tool used to slow the rate at which levels of atmospheric CO2 are increasing. Oil and gas reservoirs, coal beds, and saline reservoirs can be used for CO2 storage; however, it is difficult to assess and compare the relative storage capacities of these different settings. Typically, CO2 emissions are reported in units of mass, which are not directly applicable to comparing the CO2 storage capacities of the various storage targets. However, if the emission values are recalculated to volumes per unit mass (specific volume) then the volumes of geologic reservoirs necessary to store CO2 emissions from large point sources can be estimated. The factors necessary to convert the mass of CO2 emissions to geologic storage volume (referred to here as Specific Storage Volume or 'SSV') can be reported in units of cubic meters, cubic feet, and petroleum barrels. The SSVs can be used to estimate the reservoir volume needed to store CO2 produced over the lifetime of an individual point source, and to identify CO2 storage targets of sufficient size to meet the demand from that given point source. These storage volumes also can then be projected onto the land surface to outline a representative "footprint," which marks the areal extent of storage. This footprint can be compared with the terrestrial carbon sequestration capacity of the same land area. The overall utility of this application is that the total storage capacity of any given parcel of land (from surface to basement) can be determined, and may assist in making land management decisions. ?? Springer Science+Business Media, LLC 2006.

The identity of the North East of England has been shaped by the rocks beneath our feet

NASA Astrophysics Data System (ADS)

Shields, Deborah

2017-04-01

Geology and Geography students within England learn about the earth's processes and human processes, however it is not always easy for them to see the link between them and to their own lives. The changes to the specification within A-level Geography has seen an emphasis on how processes are linked to their own lives and the local area. I am fortunate to teach both Geography and Geology and I want my students who study both subjects to appreciate the links within the subjects. I also want them to appreciate the local geology and see how it has shaped the North East of England. I have therefore, created a series of lessons to help them to explore the local geology and place identity of the North East of England. To help them to develop an understanding of how the local geology influences place identity. I have used an enquiry based approach which uses the KWL chart and a concept map for students to demonstrate their understanding. These lessons are structured using the learning cycle. The lessons are differentiated through the use of cheat sheets, different levels of hand-outs and grouping of students. The learning objectives are:- 1. Describe the Geology of the North East of England. 2. Explain at least one process which has formed local geology. 3. Define place identity. 4. Discuss the North East of England's identity. 5. Discuss how the local Geology has influenced the North East of England's identity. The North East of England's geology mainly consists of coal and limestone. There is rich industrial heritage of the North East which is based around coal mining. Therefore, coal mining has had a great impact on the identity of the North East of England. There are also a number of different SSSIs which is due to the Magnesium limestone in the area, which has helped to shape the identity of the region. There are a number of areas of outstanding natural beauty due to the local geology and this has helped to create a positive identity for the North East of England.

Sidescan sonar imagery and surficial geologic interpretation of the sea floor off Branford, Conneticut

USGS Publications Warehouse

Poppe, L.J.; Paskevich, V.F.; Moser, M.S.; DiGiacomo-Cohen, M. L.; Christman, E.B.

2004-01-01

The U.S. Geological Survey (USGS), in cooperation with the National Oceanic and Atmospheric Administration (NOAA) and the Connecticut Department of Environmental Protection (CT DEP), Figure 1 - Map of Study Areahas produced detailed geologic maps of the sea floor in Long Island Sound, a major East Coast estuary surrounded by the most densely populated region of the United States. These studies have built upon cooperative research between the USGS and the State of Connecticut that was initiated in 1982. The current phase of this research program is directed toward studies of sea-floor sediment distribution, processes that control sediment distribution, nearshore environmental concerns, and the relation of benthic community structures to the sea-floor geology. Anthropogenic wastes, toxic chemicals, and changes in land-use patterns resulting from residential, commercial, and recreational development have stressed the environment of the Sound, causing degradation and potential loss of benthic habitats (Koppelman and others, 1976; Long Island Sound Study, 1994). Detailed maps of the sea floor are needed to help evaluate the extent of adverse impacts and to help wisely manage resources in the future. Therefore, in a continuing effort to better understand Long Island Sound, we are constructing and interpreting sidescan sonar mosaics (complete-coverage acoustic images of the sea floor) within specific areas of special interest (Poppe and Polloni, 1998). The mosaic presented herein, which was produced during survey H11043 by NOAA 's Atlantic Hydrographic Branch, covers approximately 41.1 km2 of the sea floor in north-central Long Island Sound off Branford, Connecticut. Shell bed provides shelter for juvenille skate.The mosaic and its interpretation serve many purposes, including: (1) defining the geological variability of the sea floor, which is one of the primary controls of benthic habitat diversity; (2) improving our understanding of the processes that control the distribution and transport of bottom sediments and the distribution of benthic habitats and associated infaunal community structures; and (3) providing a detailed framework for future research, monitoring, and management activities. The sidescan sonar mosaic also serves as a base map for subsequent sedimentological, geochemical, and biological observations, because precise information on environmental setting is important for selection of sampling sites and for appropriate interpretation of point measurements.

Geological hazard monitoring system in Georgia

NASA Astrophysics Data System (ADS)

Gaprindashvili, George

2017-04-01

Georgia belongs to one of world's most complex mountainous regions according to the scale and frequency of Geological processes and damage caused to population, farmlands, and Infrastructure facilities. Geological hazards (landslide, debrisflow/mudflow, rockfall, erosion and etc.) are affecting many populated areas, agricultural fields, roads, oil and gas pipes, high-voltage electric power transmission towers, hydraulic structures, and tourist complexes. Landslides occur almost in all geomorphological zones, resulting in wide differentiation in the failure types and mechanisms and in the size-frequency distribution. In Georgia, geological hazards triggered by: 1. Activation of highly intense earthquakes; 2. Meteorological events provoking the disaster processes on the background of global climatic change; 3. Large-scale Human impact on the environment. The prediction and monitoring of Geological Hazards is a very wide theme, which involves different researchers from different spheres. Geological hazard monitoring is essential to prevent and mitigate these hazards. In past years in Georgia several monitoring system, such as Ground-based geodetic techniques, Debrisflow Early Warning System (EWS) were installed on high sensitive landslide and debrisflow areas. This work presents description of Geological hazard monitoring system in Georgia.

Geological rally in the heart of Paris: How to find fossils in freestone buildings in Paris?

NASA Astrophysics Data System (ADS)

Dalaine, Stéphanie

2014-05-01

As a teacher in earth sciences, my challenge was to practise geology in an urban area. At the end of the school year, I organized a geological rally next to the Natural History Museum in the heart of Paris. The rally provided the opportunity to apply geological notions mentioned in class, and or a day out to my 16 years-old pupils. Just before this original session, students worked on different sedimentary stones such as limestone, sandstone, gypsum, and "meulière". They studied the conditions for the deposit of sediments and they identified different fossils (i.e: Cerithes, Nummulites, Milioles) in order to build "paleobackgrounds". This rally was a mean to improve with entertainment their knowledge in geology, and to discover the stones of the Parisian basin and their use as building materials. The rally was organized as follows: the pupils were divided into 4 teams of 8 students. Each team got a paper with 23 riddles. Each riddle led to a geological spot in the route of the rally. To attest their passing at each geological point the pupils had to take a picture of the characteristic fossil or the typical mark of each spot. Each team had a different itinerary to avoid pupils to meet during the rally. In order to motivate pupils and to ensure their safety, one teacher went with each team. Each riddle led to a stage. This rally comprised 23 steps which were geological spots. In case of pupils did not solve the enigma of one stage; they could open an envelope in which a map indicated the 23 geological spots. This rally lasted 2 hours. The purpose of this game was to obtain the most points thanks to the resolution of riddles. Timing and the quality of the pictures were also criterions used to evaluate the participants. At the end of this rally, pupils must be able to identify sedimentary stones, the conditions and the age of deposit of this stones (paleobackgrounds), the location of their extractions (carries), the interest of this stones in construction industry (isolation, porosity for example). The resources for such activity are especially in the following websites: http://idgt.over-blog.com/album-1207746.html, http://svt.ac-creteil.fr/.

Radiometric Dating in Geology.

ERIC Educational Resources Information Center

Pankhurst, R. J.

1980-01-01

Described are several aspects and methods of quantitatively measuring geologic time using a constant-rate natural process of radioactive decay. Topics include half lives and decay constants, radiogenic growth, potassium-argon dating, rubidium-strontium dating, and the role of geochronology in support of geological exploration. (DS)

Multi-phase classification by a least-squares support vector machine approach in tomography images of geological samples

NASA Astrophysics Data System (ADS)

Khan, Faisal; Enzmann, Frieder; Kersten, Michael

2016-03-01

Image processing of X-ray-computed polychromatic cone-beam micro-tomography (μXCT) data of geological samples mainly involves artefact reduction and phase segmentation. For the former, the main beam-hardening (BH) artefact is removed by applying a best-fit quadratic surface algorithm to a given image data set (reconstructed slice), which minimizes the BH offsets of the attenuation data points from that surface. A Matlab code for this approach is provided in the Appendix. The final BH-corrected image is extracted from the residual data or from the difference between the surface elevation values and the original grey-scale values. For the segmentation, we propose a novel least-squares support vector machine (LS-SVM, an algorithm for pixel-based multi-phase classification) approach. A receiver operating characteristic (ROC) analysis was performed on BH-corrected and uncorrected samples to show that BH correction is in fact an important prerequisite for accurate multi-phase classification. The combination of the two approaches was thus used to classify successfully three different more or less complex multi-phase rock core samples.

Marine planktonic microbes survived climatic instabilities in the past

PubMed Central

Cermeño, Pedro

2012-01-01

In the geological past, changes in climate and tectonic activity are thought to have spurred the tempo of evolutionary change among major taxonomic groups of plants and animals. However, the extent to which these historical contingencies increased the risk of extinction of microbial plankton species remains largely unknown. Here, I analyse fossil records of marine planktonic diatoms and calcareous nannoplankton over the past 65 million years from the world oceans and show that the probability of species' extinction is not correlated with secular changes in climatic instability. Further supporting these results, analyses of genera survivorship curves based on fossil data concurred with the predictions of a birth–death model that simulates the extinction of genera through time assuming stochastically constant rates of speciation and extinction. However, my results also show that these marine microbes responded to exceptional climatic contingencies in a manner that appears to have promoted net diversification. These results highlight the ability of marine planktonic microbes to survive climatic instabilities in the geological past, and point to different mechanisms underlying the processes of speciation and extinction in these micro-organisms. PMID:21775329

Hammering Yucca Flat, Part One: P-Wave Velocity

NASA Astrophysics Data System (ADS)

Tang, D. G.; Abbott, R. E.; Preston, L. A.; Hampshire, J. B., II

2015-12-01

Explosion-source phenomenology is best studied when competing signals (such as instrument, site, and propagation effects), are well understood. The second phase of the Source Physics Experiments (SPE), is moving from granite geology to alluvium geology at Yucca Flat, Nevada National Security Site. To improve subsurface characterization of Yucca Flat (and therefore better understand propagation and site effects), an active-source seismic survey was conducted using a novel 13,000-kg impulsive hammer source. The source points, spaced 200 m apart, covered a N-S transect spanning 18 km. Three component, 2-Hz geophones were used to record useable signals out to 10 km. We inverted for P-wave velocity by computing travel times using a finite-difference 3D eikonal solver, and then compared that to the picked travel times using a linearized iterative inversion scheme. Preliminary results from traditional reflection processing methods are also presented. Sandia National Laboratories is a multi-program laboratory managed and operated by Sandia Corporation, a wholly owned subsidiary of Lockheed Martin Corporation, for the U.S. Department of Energy's National Nuclear Security Administration under contract DE-AC04-94AL85000.

Publications of the Western Earth Surface Processes Team 2006

USGS Publications Warehouse

Powell, Charles L.; Stone, Paul

2007-01-01

The Western Earth Surface Processes Team (WESPT) of the U.S. Geological Survey (USGS) conducts geologic mapping, earth-surface process investigations, and related topical earth science studies in the western United States. This work is focused on areas where modern geologic maps and associated earth-science data are needed to address key societal and environmental issues such as ground-water quality, landslides and other potential geologic hazards, and land-use decisions. Areas of primary emphasis in 2006 included southern California, the San Francisco Bay region, the Mojave Desert, the Colorado Plateau region of northern Arizona, and the Pacific Northwest. The team has its headquarters in Menlo Park, California, and maintains smaller field offices at several other locations in the western United States. This compilation gives the bibliographical citations for 123 new publications, most of which are available online using the hyperlinks provided.

Geologic map of the Ponca quadrangle, Newton, Boone, and Carroll Counties, Arkansas

USGS Publications Warehouse

Hudson, Mark R.; Murray, Kyle E.

2003-01-01

This digital geologic map compilation presents new polygon (i.e., geologic map unit contacts), line (i.e., fault, fold axis, and structure contour), and point (i.e., structural attitude, contact elevations) vector data for the Ponca 7 1/2' quadrangle in northern Arkansas. The map database, which is at 1:24,000-scale resolution, provides geologic coverage of an area of current hydrogeologic, tectonic, and stratigraphic interest. The Ponca quadrangle is located in Newton, Boone, and Carroll Counties about 20 km southwest of the town of Harrison. The map area is underlain by sedimentary rocks of Ordovician, Mississippian, and Pennsylvanian age that were mildly deformed by a series of normal and strike-slip faults and folds. The area is representative of the stratigraphic and structural setting of the southern Ozark Dome. The Ponca quadrangle map provides new geologic information for better understanding groundwater flow paths and development of karst features in and adjacent to the Buffalo River watershed.

30 CFR 280.40 - When do I notify MMS that geological data and information are available for submission...

Code of Federal Regulations, 2010 CFR

2010-07-01

..., processing, or interpretation of any geological data and information. Initial analysis and processing are the stages of analysis or processing where the data and information first become available for in-house... information are available for submission, inspection, and selection? 280.40 Section 280.40 Mineral Resources...

The San Andreas Fault in the San Francisco Bay area, California: a geology fieldtrip guidebook to selected stops on public lands

USGS Publications Warehouse

Stoffer, Philip W.

2005-01-01

This guidebook contains a series of geology fieldtrips with selected destinations along the San Andreas Fault in part of the region that experienced surface rupture during the Great San Francisco Earthquake of 1906. Introductory materials present general information about the San Andreas Fault System, landscape features, and ecological factors associated with faults in the South Bay, Santa Cruz Mountains, the San Francisco Peninsula, and the Point Reyes National Seashore regions. Trip stops include roadside areas and recommended hikes along regional faults and to nearby geologic and landscape features that provide opportunities to make casual observations about the geologic history and landscape evolution. Destinations include the sites along the San Andreas and Calaveras faults in the San Juan Bautista and Hollister region. Stops on public land along the San Andreas Fault in the Santa Cruz Mountains in Santa Clara and Santa Cruz counties include in the Loma Prieta summit area, Forest of Nicene Marks State Park, Lexington County Park, Sanborn County Park, Castle Rock State Park, and the Mid Peninsula Open Space Preserve. Destinations on the San Francisco Peninsula and along the coast in San Mateo County include the Crystal Springs Reservoir area, Mussel Rock Park, and parts of Golden Gate National Recreation Area, with additional stops associated with the San Gregorio Fault system at Montara State Beach, the James F. Fitzgerald Preserve, and at Half Moon Bay. Field trip destinations in the Point Reyes National Seashore and vicinity provide information about geology and character of the San Andreas Fault system north of San Francisco.

Evaluation of long-term gas hydrate production testing locations on the Alaska North Slope

USGS Publications Warehouse

Collett, Timothy S.; Boswell, Ray; Lee, Myung W.; Anderson, Brian J.; Rose, Kelly K.; Lewis, Kristen A.

2012-01-01

The results of short-duration formation tests in northern Alaska and Canada have further documented the energy-resource potential of gas hydrates and have justified the need for long-term gas-hydrate-production testing. Additional data acquisition and long-term production testing could improve the understanding of the response of naturally occurring gas hydrate to depressurization-induced or thermal-, chemical-, or mechanical-stimulated dissociation of gas hydrate into producible gas. The Eileen gashydrate accumulation located in the Greater Prudhoe Bay area in northern Alaska has become a focal point for gas-hydrate geologic and production studies. BP Exploration (Alaska) Incorporated and ConocoPhillips have each established research partnerships with the US Department of Energy to assess the production potential of gas hydrates in northern Alaska. A critical goal of these efforts is to identify the most suitable site for production testing. A total of seven potential locations in the Prudhoe Bay, Kuparuk River, and Milne Point production units were identified and assessed relative to their suitability as a long-term gas-hydrate-production test sites. The test-site-assessment criteria included the analysis of the geologic risk associated with encountering reservoirs for gas-hydrate testing. The site-selection process also dealt with the assessment of the operational/logistical risk associated with each of the potential test sites. From this review, a site in the Prudhoe Bay production unit was determined to be the best location for extended gas-hydrate-production testing. The work presented in this report identifies the key features of the potential test site in the Greater Prudhoe Bay area and provides new information on the nature of gas-hydrate occurrence and the potential impact of production testing on existing infrastructure at the most favorable sites. These data were obtained from well-log analysis, geological correlation and mapping, and numerical simulation.

Evaluation of long-term gas hydrate production testing locations on the Alaska north slope

USGS Publications Warehouse

Collett, T.S.; Boswell, R.; Lee, M.W.; Anderson, B.J.; Rose, K.; Lewis, K.A.

2011-01-01

The results of short duration formation tests in northern Alaska and Canada have further documented the energy resource potential of gas hydrates and justified the need for long-term gas hydrate production testing. Additional data acquisition and long-term production testing could improve the understanding of the response of naturally-occurring gas hydrate to depressurization-induced or thermal-, chemical-, and/or mechanical-stimulated dissociation of gas hydrate into producible gas. The Eileen gas hydrate accumulation located in the Greater Prudhoe Bay area in northern Alaska has become a focal point for gas hydrate geologic and production studies. BP Exploration (Alaska) Incorporated and ConocoPhillips have each established research partnerships with U.S. Department of Energy to assess the production potential of gas hydrates in northern Alaska. A critical goal of these efforts is to identify the most suitable site for production testing. A total of seven potential locations in the Prudhoe Bay, Kuparuk, and Milne Point production units were identified and assessed relative to their suitability as a long-term gas hydrate production test site. The test site assessment criteria included the analysis of the geologic risk associated with encountering reservoirs for gas hydrate testing. The site selection process also dealt with the assessment of the operational/logistical risk associated with each of the potential test sites. From this review, a site in the Prudhoe Bay production unit was determined to be the best location for extended gas hydrate production testing. The work presented in this report identifies the key features of the potential test site in the Greater Prudhoe Bay area, and provides new information on the nature of gas hydrate occurrence and potential impact of production testing on existing infrastructure at the most favorable sites. These data were obtained from well log analysis, geological correlation and mapping, and numerical simulation. Copyright 2011, Offshore Technology Conference.

Geologic Investigations Spurred by Analog Testing at the 7504 Cone-SP Mountain Area of the San Francisco Volcanic Field

NASA Technical Reports Server (NTRS)

Eppler, Dean B.

2015-01-01

The SP Mountain area of the San Francisco Volcanic Field, AZ, has been used as an analog mission development site for NASA since 1998. This area consists of basaltic cinder cones, lava flows and maar craters that have been active since mid-Miocene, with the youngest events occurring within the last 10,000 years. The area has been used because its geologic and topographic resemblance to lunar and Martian terrains provides an ideal venue for testing hardware and science operations practices that might be employed on planetary surfaces, as well as training astronauts in field geology. Analog operations have often led to insights that spurred new scientific investigations. Most recently, an investigation of the 7504 cone was initiated due to perceptions that Apollo-style traverse plans executed during the Desert RATS 2010 mission had characterized the area incorrectly, leading to concerns that the Apollo traverse planning process was scientifically flawed. This investigation revealed a complex history of fissure eruptions of lava and cinders, cinder cone development, a cone-fill-and-spill episode, extensive rheomorphic lava flow initiation and emplacement, and cone sector collapse that led to a final lava flow. This history was not discernible on pre-RATS mission photogeology, although independent analysis of RATS 2010 data and samples develped a "75% complete solution" that validated the pre-RATS mission planning and Apollo traverse planning and execution. The study also pointed out that the development of scientific knowledge with time in a given field area is not linear, but may follow a functional form that rises steeply in the early period of an investigation but flattens out in the later period, asymptotically approaching a theoretical "complete knowledge" point that probably cannot be achieved. This implies that future human missions must be prepared to shift geographic areas of investigation regularly if significant science returns are to be forthcoming.

3D Voronoi grid dedicated software for modeling gas migration in deep layered sedimentary formations with TOUGH2-TMGAS

NASA Astrophysics Data System (ADS)

Bonduà, Stefano; Battistelli, Alfredo; Berry, Paolo; Bortolotti, Villiam; Consonni, Alberto; Cormio, Carlo; Geloni, Claudio; Vasini, Ester Maria

2017-11-01

As is known, a full three-dimensional (3D) unstructured grid permits a great degree of flexibility when performing accurate numerical reservoir simulations. However, when the Integral Finite Difference Method (IFDM) is used for spatial discretization, constraints (arising from the required orthogonality between the segment connecting the blocks nodes and the interface area between blocks) pose difficulties in the creation of grids with irregular shaped blocks. The full 3D Voronoi approach guarantees the respect of IFDM constraints and allows generation of grids conforming to geological formations and structural objects and at the same time higher grid resolution in volumes of interest. In this work, we present dedicated pre- and post-processing gridding software tools for the TOUGH family of numerical reservoir simulators, developed by the Geothermal Research Group of the DICAM Department, University of Bologna. VORO2MESH is a new software coded in C++, based on the voro++ library, allowing computation of the 3D Voronoi tessellation for a given domain and the creation of a ready to use TOUGH2 MESH file. If a set of geological surfaces is available, the software can directly generate the set of Voronoi seed points used for tessellation. In order to reduce the number of connections and so to decrease computation time, VORO2MESH can produce a mixed grid with regular blocks (orthogonal prisms) and irregular blocks (polyhedron Voronoi blocks) at the point of contact between different geological formations. In order to visualize 3D Voronoi grids together with the results of numerical simulations, the functionality of the TOUGH2Viewer post-processor has been extended. We describe an application of VORO2MESH and TOUGH2Viewer to validate the two tools. The case study deals with the simulation of the migration of gases in deep layered sedimentary formations at basin scale using TOUGH2-TMGAS. A comparison between the simulation performances of unstructured and structured grids is presented.

Geologic Investigations Spurred by Analog Testing at the 7504 Cone-Sp Mountain Area of the San Francisco Volcanic Field

NASA Astrophysics Data System (ADS)

Bleacher, J. E.; Eppler, D. B.; Needham, D. H.; Evans, C. A.; Skinner, J. A.; Feng, W.

2015-12-01

The SP Mountain area of the San Francisco Volcanic Field, AZ, has been used as an analog mission development site for NASA since 1998. This area consists of basaltic cinder cones, lava flows and maar craters that have been active since mid-Miocene, with the youngest events occurring within the last 10,000 years. The area has been used because its geologic and topographic resemblance to lunar and Martian terrains provides an ideal venue for testing hardware and science operations practices that might be employed on planetary surfaces, as well as training astronauts in field geology. Analog operations have often led to insights that spurred new scientific investigations. Most recently, an investigation of the 7504 cone was initiated due to perceptions that Apollo-style traverse plans executed during the Desert RATS 2010 mission had characterized the area incorrectly, leading to concerns that the Apollo traverse planning process was scientifically flawed. This investigation revealed a complex history of fissure eruptions of lava and cinders, cinder cone development, a cone-fill-and-spill episode, extensive rheomorphic lava flow initiation and emplacement, and cone sector collapse that led to a final lava flow. This history was not discernible on pre-RATS mission photogeology, although independent analysis of RATS 2010 data and samples develped a "75% complete solution" that validated the pre-RATS mission planning and Apollo traverse planning and execution. The study also pointed out that the development of scientific knowledge with time in a given field area is not linear, but may follow a functional form that rises steeply in the early period of an investigation but flattens out in the later period, asymptotically approaching a theoretical "complete knowledge" point that probably cannot be achieved. This implies that future human missions must be prepared to shift geographic areas of investigation regularly if significant science returns are to be forthcoming.

Evaluation of long-term gas hydrate production testing locations on the Alaska North Slope

USGS Publications Warehouse

Collett, Timothy; Boswell, Ray; Lee, Myung W.; Anderson, Brian J.; Rose, Kelly K.; Lewis, Kristen A.

2011-01-01

The results of short duration formation tests in northern Alaska and Canada have further documented the energy resource potential of gas hydrates and justified the need for long-term gas hydrate production testing. Additional data acquisition and long-term production testing could improve the understanding of the response of naturally-occurring gas hydrate to depressurization-induced or thermal-, chemical-, and/or mechanical-stimulated dissociation of gas hydrate into producible gas. The Eileen gas hydrate accumulation located in the Greater Prudhoe Bay area in northern Alaska has become a focal point for gas hydrate geologic and production studies. BP Exploration (Alaska) Incorporated and ConocoPhillips have each established research partnerships with U.S. Department of Energy to assess the production potential of gas hydrates in northern Alaska. A critical goal of these efforts is to identify the most suitable site for production testing. A total of seven potential locations in the Prudhoe Bay, Kuparuk, and Milne Point production units were identified and assessed relative to their suitability as a long-term gas hydrate production test site. The test site assessment criteria included the analysis of the geologic risk associated with encountering reservoirs for gas hydrate testing. The site selection process also dealt with the assessment of the operational/logistical risk associated with each of the potential test sites. From this review, a site in the Prudhoe Bay production unit was determined to be the best location for extended gas hydrate production testing. The work presented in this report identifies the key features of the potential test site in the Greater Prudhoe Bay area, and provides new information on the nature of gas hydrate occurrence and potential impact of production testing on existing infrastructure at the most favorable sites. These data were obtained from well log analysis, geological correlation and mapping, and numerical simulation.

Fold-Thrust mapping using photogrammetry in Western Champsaur basin, SE France

NASA Astrophysics Data System (ADS)

Totake, Y.; Butler, R.; Bond, C. E.

2016-12-01

There is an increasing demand for high-resolution geometric data for outcropping geological structures - not only to test models for their formation and evolution but also to create synthetic seismic visualisations for comparison with subsurface data. High-resolution 3D scenes reconstructed by modern photogrammetry offer an efficient toolbox for such work. When integrated with direct field measurements and observations, these products can be used to build geological interpretations and models. Photogrammetric techniques using standard equipment are ideally suited to working in the high mountain terrain that commonly offers the best outcrops, as all equipment is readily portable and, in the absence of cloud-cover, not restricted to the meteorological and legal restrictions that can affect some airborne approaches. The workflows and approaches for generating geological models utilising such photogrammetry techniques are the focus of our contribution. Our case study comes from SE France where early Alpine fore-deep sediments have been deformed into arrays of fold-thrust complexes. Over 1500m vertical relief provides excellent outcrop control with surrounding hillsides providing vantage points for ground-based photogrammetry. We collected over 9,400 photographs across the fold-thrust array using a handheld digital camera from 133 ground locations that were individually georeferenced. We processed the photographic images within the software PhotoScan-Pro to build 3D landscape scenes. The built photogrammetric models were then imported into the software Move, along with field measurements, to map faults and sedimentary layers and to produce geological cross sections and 3D geological surfaces. Polylines of sediment beds and faults traced on our photogrammetry models allow interpretation of a pseudo-3D geometry of the deformation structures, and enable prediction of dips and strikes from inaccessible field areas, to map the complex geometries of the thrust faults and deformed strata in detail. The resultant structural geometry of the thrust zones delivers an exceptional analogue to inaccessible subsurface fold-thrust structures which are often challenging to obtain a clear seismic image.

Holocene palaeoDEMs for lowland coastal and delta plain landscape reconstructions

NASA Astrophysics Data System (ADS)

Cohen, Kim M.; Koster, Kay; Pierik, Harm-Jan; Van der Meulen, Bas; Hijma, Marc; Schokker, Jeroen; Stafleu, Jan

2017-04-01

Geological mapping of Holocene deposits of coastal plains, such as that of The Netherlands can reach high resolution (dense population, diverse applied usage) and good time control (14C dating, archaeology). The next step is then to create time sliced reconstructions for stages in the Holocene, peeling of the subrecent and exposing past relief situation. This includes winding back the history of sea-level rise and delta progradation etc. etc. So far, this has mainly be done as 2D series of landscape maps, or as sea-level curve age-depth plots. In the last decade, academic and applied projects at Utrecht University, TNO Geological Survey of The Netherlands and Deltares have developed palaeoDEMs for the Dutch low lands, that are a third main way of showing coastal plain evolution. Importantly, we produce two types of palaeoDEMs: (1) geological surface mapping using deposit contacts from borehole descriptions (and scripted 3D processing techniques - e.g. Van der Meulen et al. 2013) and (2) palaeogroundwater surfaces, using sea-level and inland water-level index-points (and 3D kriging interpolations - e.g. Koster et al. 2016). The applications for the combined palaeoDEMs range from relative sea-level rise mapping and assessment of variation in rate of GIA across the coastal plain, to quantification of soft soil deformation, to analysis of pre-embankment extreme flood levels. Koster, K., Stafleu, J., & Cohen, K.M. (2016). Generic 3D interpolation of Holocene base-level rise and provision of accommodation space, developed for the Netherlands coastal plain and infilled palaeovalleys. Basin Research. DOI 10.1111/bre.12202 Van der Meulen, M.J., Doornenbal, J.C., Gunnink, J.L., Stafleu, J., Schokker, J., Vernes, R.W., Van Geer, F.C., Van Gessel, S.F., Van Heteren, S., Van Leeuwen, R.J.W. & Bakker, M.A.J. (2013). 3D geology in a 2D country: perspectives for geological surveying in the Netherlands. Netherlands Journal of Geosciences, 92, 217-241. DOI 10.1017/S0016774600000184

Transition probability-based stochastic geological modeling using airborne geophysical data and borehole data

NASA Astrophysics Data System (ADS)

He, Xin; Koch, Julian; Sonnenborg, Torben O.; Jørgensen, Flemming; Schamper, Cyril; Christian Refsgaard, Jens

2014-04-01

Geological heterogeneity is a very important factor to consider when developing geological models for hydrological purposes. Using statistically based stochastic geological simulations, the spatial heterogeneity in such models can be accounted for. However, various types of uncertainties are associated with both the geostatistical method and the observation data. In the present study, TProGS is used as the geostatistical modeling tool to simulate structural heterogeneity for glacial deposits in a head water catchment in Denmark. The focus is on how the observation data uncertainty can be incorporated in the stochastic simulation process. The study uses two types of observation data: borehole data and airborne geophysical data. It is commonly acknowledged that the density of the borehole data is usually too sparse to characterize the horizontal heterogeneity. The use of geophysical data gives an unprecedented opportunity to obtain high-resolution information and thus to identify geostatistical properties more accurately especially in the horizontal direction. However, since such data are not a direct measurement of the lithology, larger uncertainty of point estimates can be expected as compared to the use of borehole data. We have proposed a histogram probability matching method in order to link the information on resistivity to hydrofacies, while considering the data uncertainty at the same time. Transition probabilities and Markov Chain models are established using the transformed geophysical data. It is shown that such transformation is in fact practical; however, the cutoff value for dividing the resistivity data into facies is difficult to determine. The simulated geological realizations indicate significant differences of spatial structure depending on the type of conditioning data selected. It is to our knowledge the first time that grid-to-grid airborne geophysical data including the data uncertainty are used in conditional geostatistical simulations in TProGS. Therefore, it provides valuable insights regarding the advantages and challenges of using such comprehensive data.

Noachian Impact Breccias on the Rim of Endeavour Crater, Mars: Opportunity APXS Results

NASA Technical Reports Server (NTRS)

Mittlefehldt, D. W.; Gellert, R.; Arvidson, R. E.; Bell, J. F., III; Farrand, W. H.; Herkenhoff, K. E.; Jolliff, B. L.; Ming, D. W.; Schroeder, C.; Sullivan, R. J.

2014-01-01

Mars Exploration Rover Opportunity has been investigating the geology of Meridiani Planum since January 2004, and is currently approx. 3830% into its primary mission. Opportunity reached the rim of 22 km diameter Endeavor crater at Spirit Point on the south end of Cape York on sol 2681 and began exploring the geology of Endeavour rim. She left Cape York on sol 3316 and arrived at the next rim remnant to the south, Solander Point, on sol 3387 to begin geological investigations at the contact and up onto Murray Ridge. The Burns fm. of Meridiani Planum lies near the top of the plains-forming unit of western Sinus Meridiani and onlaps onto the Endeavour rim rocks (hereafter rim rocks). Endeavour crater would have excavated approx. 4 km into the existing stratigraphy. Thus, the ejecta that form the rim rocks offer windows into the deeper lithologies of Sinus Meridiani. Here we discuss the polymict breccias of the Shoemaker fm. on Cape York and the breccias from Murray Ridge, with a focus on compositions determined by the Alpha Particle X-Ray Spectrometer (APXS).

Immersive Virtual Reality Field Trips in the Geosciences: Integrating Geodetic Data in Undergraduate Geoscience Courses

NASA Astrophysics Data System (ADS)

La Femina, P. C.; Klippel, A.; Zhao, J.; Walgruen, J. O.; Stubbs, C.; Jackson, K. L.; Wetzel, R.

2017-12-01

High-quality geodetic data and data products, including GPS-GNSS, InSAR, LiDAR, and Structure from Motion (SfM) are opening the doors to visualizing, quantifying, and modeling geologic, tectonic, geomorphic, and geodynamic processes. The integration of these data sets with other geophysical, geochemical and geologic data is providing opportunities for the development of immersive Virtual Reality (iVR) field trips in the geosciences. iVR fieldtrips increase accessibility in the geosciences, by providing experiences that allow for: 1) exploration of field locations that might not be tenable for introductory or majors courses; 2) accessibility to outcrops for students with physical disabilities; and 3) the development of online geosciences courses. We have developed a workflow for producing iVR fieldtrips and tools to make quantitative observations (e.g., distance, area, and volume) within the iVR environment. We use a combination of terrestrial LiDAR and SfM data, 360° photos and videos, and other geophysical, geochemical and geologic data to develop realistic experiences for students to be exposed to the geosciences from sedimentary geology to physical volcanology. We present two of our iVR field trips: 1) Inside the Volcano: Exploring monogenetic volcanism at Thrihnukagigar Iceland; and 2) Changes in Depositional Environment in a Sedimentary Sequence: The Reedsville and Bald Eagle Formations, Pennsylvania. The Thrihnukagigar experience provides the opportunity to investigate monogenetic volcanism through the exploration of the upper 125 m of a fissure-cinder cone eruptive system. Students start at the plate boundary scale, then zoom into a single volcano where they can view the 3D geometry from either terrestrial LiDAR or SfM point clouds, view geochemical data and petrologic thins sections of rock samples, and a presentation of data collection and analysis, results and interpretation. Our sedimentary geology experience is based on a field lab from our introductory Physical Geology course for majors in Geoscience and Engineering. The lab explores formation of a turbidite sequence, and the transition to a shallower marine environment using the tools described above and data from SfM and 360° photos. We are evaluating the effectiveness of both iVR field trips on student learning.

Application Development: AN Interactive, Non-Technical Perspective of the Geology and Geomorphology of the Ouray Perimeter Tail, CO.

NASA Astrophysics Data System (ADS)

Allen, H. M.; Giardino, J. R.

2015-12-01

Each year people seek respite from their busy lifestyles by traveling to state or national parks, national forests or wilderness areas. The majority of these parks were established in order to help preserve our natural heritage, including wildlife, forests, and the beauty of landscapes formed from thousands of years of geologic/geomorphologic processes. Whilst being able to enjoy the tranquility of nature, tourists are being robbed of a more in-depth experience as a result of the lack of a geologic background. One such location that attracts a large number of summer tourists is the perimeter trail in Ouray, Colorado. Located in the Southwestern portion of Colorado, Ouray is situated in the beautiful San Juan Mountain range along the "Million Dollar Highway." The Perimeter trail is a six-mile trail loop that circles the city of Ouray. The city is a very popular place for summertime tourism because of its unparalleled scenery. Ouray is situated in an area that is riddled with textbook angular unconformities, metasedimentary, sedimentary, and volcanic rocks. In the study area, The San Juans have been beautifully sculpted by an array of major faulting events, glacial activity and volcanics. With the understanding that technology is ever expanding, we think there is no better way to experience the Perimeter Trail than to have an interactive application that will be both educational as well as interesting. This application is a non-technical way of looking at the geology and geomorphology of the perimeter trail. Additionally, a paper brochure shows the most noteworthy points of interest. The brochure contains a brief geologic history of the San Juan Mountains accompanied with annotated photographs to illustrate the complex geology/geomorphology encountered on the trail. The application is based on an interactive three-dimensional map, which can be zoomed to various scales. The app hosts a locational service that uses the phone's GPS to communicate location of the hiker on the trail. This project developed a simple, yet effective application that will not only guide hikers along the trail, but also aid in educating the thousands of tourists that visit the area yearly.

Geological Survey research 1981

USGS Publications Warehouse

,

1982-01-01

This U.S. Geological Survey activities report includes a summary of 1981 fiscal year scientific and economic results accompanied by a list of geologic, hydrologic, and cartographic investigations in progress. The summary of results includes: (1) Mineral, (2) Water resources, (3) Engineering geology and hydrology, (4) Regional geology, (5) Principles and processes, (6) Laboratory and field methods, (7) Topographic surveys and mapping, (8) Management of resources on public lands, (9) Land information and analysis, and (10) Investigations in other countries. Also included are lists of investigations in progress.

Basic Research Needs for Geosciences: Facilitating 21st Century Energy Systems

DOE Office of Scientific and Technical Information (OSTI.GOV)

DePaolo, D. J.; Orr, F. M.; Benson, S. M.

2007-06-01

To identify research areas in geosciences, such as behavior of multiphase fluid-solid systems on a variety of scales, chemical migration processes in geologic media, characterization of geologic systems, and modeling and simulation of geologic systems, needed for improved energy systems.

Creation of the Teton landscape: A geologic chronicle of Jackson Hole and The Teton Range

USGS Publications Warehouse

Reed, John Calvin; Love, David; Pierce, Kenneth

2003-01-01

Geology is the science of the Earth-the study of the forces, processes, and past life that not only shape our land but influence our daily lives and our Nation's welfare. This booklet, prepared by two members of the U.S. Geological Survey, discusses how geologic phenomena are responsible for the magnificent scenery of the Teton region

Holocene Erosion Patterns in European Alps Viewed from Lake Sediment

NASA Astrophysics Data System (ADS)

Arnaud, F.; Poulenard, J.; Giguet-Covex, C.; Wilhelm, B.; Revillon, S.; Jenny, J. P.; Revel, M.; Enters, D.; Bajard, M.; Fouinat, L.; Doyen, E.; Simonneau, A.; Chapron, E.; Vannière, B.; Sabatier, P.

2016-12-01

In this paper we review the scientific efforts that were led over the last decades to reconstruct erosion from continuous alpine lake sediment records. Whereas most available geological records of Holocene terrigenous input focused in climate we propose a regional approach without any a priori regarding erosion forcing factors. In that aim, we integrated a set of sediment sequences from various environment along an altitudinal gradient from 200 up to 2400m asl in Northern French Alps. Altogether our data point climate change as one of the main factor of erosion variability. In particular, the last two cold spells that occurred during the early middle age (Dark Age) and between the 14th and the 20th century AD (Little Ice Age) appear to be outstanding compared to any other periods of enhanced erosion along the Holocene. The climatic forcing of those erosion phases is supported by an increase in the contribution of glacier-eroded material at a regional scale. However, at local scales, our data point the growing importance, since at least the mid Bronze Age (ca. 3500 cal. BP) of human activities as a major erosion factor. This influence peaked during the late Iron Age and Antiquity periods (200 BC - 400 AD) when we record a regional generalised period of enhanced erosion in response to the development of pasturing activities. Thanks to provenance and weathering markers, we evidenced a strong relationship between the changes in ecosystems, soil development and erosion patterns. We hence showed the vegetal colonisation of bared soil led to a period of intense weathering while new soils were under formation between 11,000 and 8,000 cal. BP. Soils then knew an optimum until the onset of the Neoglacial at ca. 4,500 cal. BP prior to decline under both climate and human pressures. Altogether our data point the complexity of processes that affected the Earth critical zone along the Holocene and especially since humans became a major geologic agent. However, we highlight the interest of leading spatialized paleo-investigation in order to reconstruct those dynamics through and thus better understand the processes in play in critical zone dynamics over long time periods.

Geological Survey research 1976

USGS Publications Warehouse

,

1976-01-01

This U.S. Geological Survey activities report includes a summary of recent (1976 fiscal year) scientific and economic results accompanied by a list of geologic and hydrologic investigations in progress and a report on the status of topographic mapping. The summary of results includes: (1) Mineral resources, Water resources, (2) Engineering geology and hydrology, (3) Regional geology, (4) Principles and processes, (5) Laboratory and field methods, (6) Topographic surveys and mapping, (7) Management of resources on public lands, (8) Land information and analysis, and (9) Investigations in other countries. Also included are lists of cooperating agencies and Geological Survey offices. (Woodard-USGS)

Geological Survey research 1978

USGS Publications Warehouse

,

1978-01-01

This U.S. Geological Survey activities report includes a summary of 1978 fiscal year scientific and economic results accompanied by a list of geologic and hydrologic investigations in progress and a report on the status of topographic mapping. The summary of results includes: (1) Mineral and water resources, (2) Engineering geology and hydrology, (3) Regional geology, (4) Principles and processes, (5) Laboratory and field methods, (6) Topographic surveys and mapping, (7) Management of resources on public lands, (8) Land information and analysis, and (9) Investigations in other countries. Also included are lists of cooperating agencies and Geological Survey offices. (Woodard-USGS)

One application of mega-geomorphology in education

NASA Technical Reports Server (NTRS)

Blair, R. W., Jr.

1985-01-01

One advantage of a synoptic view displaying landform assemblages provided by imagery is that one can often identify geomorphic processes which have shaped the region and which may affect the habitability of the area over a human life time. Considering the continued growth of the world population and the resultant pressure and the exploitation of land, usually without any consideration given to geologic processes, it is imperative that we attempt to educate as large a segment of the population as we can about geologic processes and how they influence land use. Space platform imagery which exhibits regional landscapes can be used: (1) to show students the impact of geologic processes over relatively short periods of time (e.g., the Mount St. Helens lateral blast); (2) to display the effects of poor planning because of a lack of knowledge of the local geologic processes (e.g., the 1973 image of the Mississippi River flood around St. Louis, MO); and (3) to show the association of certain types of landforms with building materials and other resources (e.g., drumlins and gravel deposits).

Resolving land subsidence within the Venice Lagoon by persistent scatterer SAR interferometry

NASA Astrophysics Data System (ADS)

Teatini, P.; Tosi, L.; Strozzi, T.; Carbognin, L.; Cecconi, G.; Rosselli, R.; Libardo, S.

Land subsidence is a severe geologic hazard threatening the lowlying transitional coastal areas worldwide. Monitoring land subsidence has been significantly improved over the last decade by space borne earth observation techniques based on Synthetic Aperture Radar (SAR) interferometry. Within the INLET Project, funded by Magistrato alle Acque di Venezia - Venice Water Authority (VWA) and Consorzio Venezia Nuova (CVN), we use Interferometric Point Target Analysis (IPTA) to characterize the ground displacements within the Venice Lagoon. IPTA measures the movement of backscattering point targets (PTs) at the ground surface that persistently reflect radar signals emitted by the SAR system at different passes. For this study 80 ERS-1/2 and 44 ENVISAT SAR scenes recorded from 1992 to 2005 and from 2003 to 2007, respectively, have been processed. Highly reliable displacement measurements have been detected for thousands of PTs located on the lagoon margins, along the littorals, in major and small islands, and on single structures scattered within the lagoon. On the average, land subsidence ranges from less than 1 mm/year to 5 mm/year, with some PTs that exhibit values also larger than 10 mm/year depending on both the local geologic conditions and the anthropic activities. A network of a few tens of artificial square trihedral corner reflectors (TCRs) has been established before summer 2007 in order to monitor land subsidence in the inner lagoon areas where “natural” reflectors completely lack (e.g., on the salt marshes). The first interferometric results on the TCRs appear very promising.

Study of a prehistoric landslide using seismic reflection methods integrated with geological data in the Wasatch Mountains, Utah, USA

USGS Publications Warehouse

Tingey, B.E.; McBride, J.H.; Thompson, T.J.; Stephenson, W.J.; South, J.V.; Bushman, M.

2007-01-01

An integration of geological and geophysical techniques characterizes the internal and basal structure of a landslide along the western margin of the Wasatch Mountains in northern Utah, USA. The study area is within a region of planned and continuing residential development. The Little Valley Landslide is a prehistoric landslide as old as 13??ka B.P. Drilling and trenching at the site indicate that the landslide consists of chaotic and disturbed weathered volcanic material derived from Tertiary age volcanic rocks that comprise a great portion of the Wasatch Range. Five short high-resolution common mid-point seismic reflection profiles over selected portions of the site examine the feasibility of using seismic reflection to study prehistoric landslides in the Wasatch Mountain region. Due to the expected complexity of the near-surface geology, we have pursued an experimental approach in the data processing, examining the effects of muting first arrivals, frequency filtering, model-based static corrections, and seismic migration. The results provide a framework for understanding the overall configuration of the landslide, its basal (failure) surface, and the structure immediately underlying this surface. A glide surface or de??collement is interpreted to underlie the landslide suggesting a large mass movement. The interpretation of a glide surface is based on the onset of coherent reflectivity, calibrated by information from a borehole located along one of the seismic profiles. The glide surface is deepest in the center portion of the landslide and shallows up slope, suggesting a trough-like feature. This study shows that seismic reflection techniques can be successfully used in complex alpine landslide regions to (1) provide a framework in which to link geological data and (2) reduce the need for an extensive trenching and drilling program. ?? 2007 Elsevier B.V. All rights reserved.

High-resolution Ceres LAMO atlas derived from Dawn FC images

NASA Astrophysics Data System (ADS)

Roatsch, T.; Kersten, E.; Matz, K. D.; Preusker, F.; Scholten, F.; Jaumann, R.; Raymond, C. A.; Russell, C.

2016-12-01

Introduction: NASA's Dawn spacecraft has been orbiting the dwarf planet Ceres since December 2015 in LAMO (High Altitude Mapping Orbit) with an altitude of about 400 km to characterize for instance the geology, topography, and shape of Ceres. One of the major goals of this mission phase is the global high-resolution mapping of Ceres. Data: The Dawn mission is equipped with a fram-ing camera (FC). The framing camera took until the time of writing about 27,500 clear filter images in LAMO with a resolution of about 30 m/pixel and dif-ferent viewing angles and different illumination condi-tions. Data Processing: The first step of the processing chain towards the cartographic products is to ortho-rectify the images to the proper scale and map projec-tion type. This process requires detailed information of the Dawn orbit and attitude data and of the topography of the target. A high-resolution shape model was provided by stereo processing of the HAMO dataset, orbit and attitude data are available as reconstructed SPICE data. Ceres' HAMO shape model is used for the calculation of the ray intersection points while the map projection itself was done onto a reference sphere of Ceres. The final step is the controlled mosaicking of all nadir images to a global mosaic of Ceres, the so called basemap. Ceres map tiles: The Ceres atlas will be produced in a scale of 1:250,000 and will consist of 62 tiles that conforms to the quadrangle schema for Venus at 1:5,000,000. A map scale of 1:250,000 is a compro-mise between the very high resolution in LAMO and a proper map sheet size of the single tiles. Nomenclature: The Dawn team proposed to the International Astronomical Union (IAU) to use the names of gods and goddesses of agriculture and vege-tation from world mythology as names for the craters and to use names of agricultural festivals of the world for other geological features. This proposal was ac-cepted by the IAU and the team proposed 92 names for geological features to the IAU based on the LAMO mosaic. These feature names will be applied to the map tiles.

A Study of the Education of Geology

NASA Astrophysics Data System (ADS)

Berglin, R. S.; Baldridge, A. M.; Buxner, S.; Crown, D. A.

2013-12-01

An Evaluation and Assessment Method for Workshops in Science Education and Resources While many professional development workshops train teachers with classroom activities for students, Workshops in Science Education and Resources (WISER): Planetary Perspectives is designed to give elementary and middle school teachers the deeper knowledge necessary to be confident teaching the earth and space science content in their classrooms. Two WISER workshops, Deserts of the Solar System and Volcanoes of the Solar System, place an emphasis on participants being able to use learned knowledge to describe or 'tell the story of' a given rock. In order to understand how participants' knowledge and ability to tell the story changes with instruction, we are investigating new ways of probing the understanding of geologic processes. The study will include results from both college level geology students and teachers, focusing on their understanding of geologic processes and the rock cycle. By studying how new students process geologic information, teachers may benefit by learning how to better teach similar information. This project will help to transfer geologic knowledge to new settings and assess education theories for how people learn. Participants in this study include teachers participating in the WISER program in AZ and introductory level college students at St. Mary's College of California. Participants will be videotaped drawing out their thought process on butcher paper as they describe a given rock. When they are done, they will be asked to describe what they have put on the paper and this interview will be recorded. These techniques will be initially performed with students at St. Mary's College of California to understand how to best gather information. An evaluation of their prior knowledge and previous experience will be determined, and a code of their thought process will be recorded. The same students will complete a semester of an introductory college level Physical Geology course and then complete the assessment process, with the same rock again. Data will be compared to see how the thought process has changed. By studying the initial thought process, teachers can meet students at their level. At the end of the student research, this project will also be applied to elementary and middle school teachers in Tucson, Arizona at WISER workshops. This study will draw conclusions on how participants' thought processes change through WISER-type instruction.

Absolute stellar photometry on moderate-resolution FPA images

USGS Publications Warehouse

Stone, T.C.

2009-01-01

An extensive database of star (and Moon) images has been collected by the ground-based RObotic Lunar Observatory (ROLO) as part of the US Geological Survey program for lunar calibration. The stellar data are used to derive nightly atmospheric corrections for the observations from extinction measurements, and absolute calibration of the ROLO sensors is based on observations of Vega and published reference flux and spectrum data. The ROLO telescopes were designed for imaging the Moon at moderate resolution, thus imposing some limitations for the stellar photometry. Attaining accurate stellar photometry with the ROLO image data has required development of specialized processing techniques. A key consideration is consistency in discriminating the star core signal from the off-axis point spread function. The analysis and processing methods applied to the ROLO stellar image database are described. ?? 2009 BIPM and IOP Publishing Ltd.

Geology Before Pluto: Pre-encounter Considerations

NASA Astrophysics Data System (ADS)

Moore, J. M.

2014-12-01

Pluto, its large satellite Charon, and its four small known satellites represent the first trans-Neptunian Kuiper Belt objects populating the outer-most solar system beyond the gas giant planets to be studied in detail from a spacecraft (New Horizons). A complete picture of the solar nebula and solar system formation cannot be confidently formulated until representatives of this group of bodies at the edge of solar space have been examined. The Pluto system is composed of unique, lunar- and intermediate-sized objects that can tell us much about how objects with volatile icy compositions evolve. Modeling of the interior suggests that geologic activity may have been significant to some degree, and observations of frost on the surface could imply the need for a geologic reservoir for the replenishment of these phases. However, these putative indicators of Pluto's geologic history are inconclusive and unspecific. Detailed examination of Pluto's geologic record is the only plausible means of bridging the gap between theory and observation. In this talk I will examine the potential importance of these tentative indications of geologic activity and how specific spacecraft observations have been designed and used to constrain the Pluto system's geologic history. The cameras of New Horizons will provide robust data sets that should be immanently amenable to geological analysis of the Pluto system's landscapes. In this talk, we begin with a brief discussion of the planned observations by the New Horizons cameras that will bear most directly on geological interpretability. Then I will broadly review major geological processes that could potentially operate on the surfaces of Pluto and its moons. I will first survey exogenic processes (i.e., those for which energy for surface modification is supplied externally to the planetary surface): impact cratering, sedimentary processes (including volatile migration), and the work of wind. I will conclude with an assessment of the prospects for endogenic activity in the form of tectonics and cryovolcanism.

Geology Before Pluto: Pre-encounter Considerations

NASA Astrophysics Data System (ADS)

Moore, Jeffrey

2014-05-01

Jeffrey M. Moore (NASA Ames) and the New Horizons Science Team Pluto, its large satellite Charon, and its four small known satellites represent the first trans-Neptunian Kuiper Belt objects populating the outer-most solar system beyond the gas giant planets to be studied in detail from a spacecraft (New Horizons). A complete picture of the solar nebula and solar system formation cannot be confidently formulated until representatives of this group of bodies at the edge of solar space have been examined. The Pluto system is composed of unique, lunar- and intermediate-sized objects that can tell us much about how objects with volatile icy compositions evolve. Modeling of the interior suggests that geologic activity may have been significant to some degree, and observations of frost on the surface could imply the need for a geologic reservoir for the replenishment of these phases. However, these putative indicators of Pluto's geologic history are inconclusive and unspecific. Detailed examination of Pluto's geologic record is the only plausible means of bridging the gap between theory and observation. In this talk I will examine the potential importance of these tentative indications of geologic activity and how specific spacecraft observations have been designed and used to constrain the Pluto system's geologic history. The cameras of New Horizons will provide robust data sets that should be immanently amenable to geological analysis of the Pluto System's landscapes. In this talk, we begin with a brief discussion of the planned observations by the New Horizons cameras that will bear most directly on geological interpretability. Then I will broadly review major geological processes that could potentially operate on the surfaces of Pluto and its moons. I will first survey exogenic processes (i.e. those for which energy for surface modification is supplied externally to the planetary surface): impact cratering, sedimentary processes (including volatile migration), and the work of wind. I will conclude with an assessment of the prospects for endogenic activity in the form of tectonics and cryo-volcanism.

Geology Before Pluto: Pre-Encounter Considerations

NASA Technical Reports Server (NTRS)

Moore, Jeffrey M.

2014-01-01

Pluto, its large satellite Charon, and its four known satellites represent the first trans-Neptunian Kuiper Belt objects populating the outer-most solar system beyond the gas giant planets to be studied in detail from a spacecraft (New Horizons). A complete picture of the solar nebula, and solar system formation cannot be confidently formulated until representatives of this group of bodies at the edge of solar space have been examined. The Pluto system is composed of unique lunar- and intermediate-sized objects that can tell us much about how objects with volatile icy compositions evolve. Modeling of the interior suggests that geologic activity may have been to some degree, and observations of frost on the surface could imply the need for a geologic reservoir for the replenishment of these phases. However, the putative indicators of Pluto's geologic history are inconclusive and unspecific. Detailed examination of Pluto's geologic record is the only plausible means of bridging the gap between theory and observations. In this talk I will examine the potential importance of these tentative indications of geologic activity and how specific spacecraft observations have been designed and used to constrain the Pluto system's geologic history. The cameras of New Horizons will provide robust data sets that should be immanently amenable to geological analysis of the Pluto System's landscapes. In this talk, we begin with a brief discussion of the planned observations by New Horizons' cameras that will bear most directly on geological interpretability. Then I will broadly review major geological processes that could potentially operate of the surfaces of Pluto and its moons. I will first survey exogenic processes (i.e., those for which energy for surface modification is supplied externally to the planetary surface): impact cratering, sedimentary processes (including volatile migration) and the work of wind. I will conclude with an assessment of prospects for endogenic activity in the form of tectonics and cryo-volcanism.

Geologic Mapping Results for Ceres from NASA's Dawn Mission

NASA Astrophysics Data System (ADS)

Williams, D. A.; Mest, S. C.; Buczkowski, D.; Scully, J. E. C.; Raymond, C. A.; Russell, C. T.

2017-12-01

NASA's Dawn Mission included a geologic mapping campaign during its nominal mission at dwarf planet Ceres, including production of a global geologic map and a series of 15 quadrangle maps to determine the variety of process-related geologic materials and the geologic history of Ceres. Our mapping demonstrates that all major planetary geologic processes (impact cratering, volcanism, tectonism, and gradation (weathering-erosion-deposition)) have occurred on Ceres. Ceres crust, composed of altered and NH3-bearing silicates, carbonates, salts and 30-40% water ice, preserves impact craters and all sizes and degradation states, and may represent the remains of the bottom of an ancient ocean. Volcanism is manifested by cryovolcanic domes, such as Ahuna Mons and Cerealia Facula, and by explosive cryovolcanic plume deposits such as the Vinalia Faculae. Tectonism is represented by several catenae extending from Ceres impact basins Urvara and Yalode, terracing in many larger craters, and many localized fractures around smaller craters. Gradation is manifested in a variety of flow-like features caused by mass wasting (landslides), ground ice flows, as well as impact ejecta lobes and melts. We have constructed a chronostratigraphy and geologic timescale for Ceres that is centered around major impact events. Ceres geologic periods include Pre-Kerwanan, Kerwanan, Yalodean/Urvaran, and Azaccan (the time of rayed craters, similar to the lunar Copernican). The presence of geologically young cryovolcanic deposits on Ceres surface suggests that there could be warm melt pockets within Ceres shallow crust and the dwarf planet remain geologically active.

Publications - GMC 151 | Alaska Division of Geological & Geophysical

Science.gov Websites

and Facilities Staff Seismic and Well Data Data Reports Contact Us Frequently Asked Questions Ask a Gulf Oil Corp. Point Mcintyre #1 well Authors: Unknown Publication Date: 1990 Publisher: Alaska reflectance data of cuttings (3,540-11,850) from the Gulf Oil Corp. Point Mcintyre #1 well: Alaska Division of

LiDAR and Image Point Cloud Comparison

DTIC Science & Technology

2014-09-01

UAV unmanned aerial vehicle USGS United States Geological Survey UTM Universal Transverse Mercator WGS 84 World Geodetic System 1984 WSI...19  1.  Physics of LiDAR Systems ................................................................20  III.  DATA AND SOFTWARE...ground control point GPS Global Positioning System IMU inertial measurements unit LiDAR light detection and ranging MI mutual information MVS

Teaching the geological subsurface with 3D models

NASA Astrophysics Data System (ADS)

Thorpe, Steve; Ward, Emma

2014-05-01

3D geological models have great potential as a resource when teaching geological concepts as it allows the student to visualise and interrogate UK geology. They are especially useful when dealing with the conversion of 2D field, map and GIS outputs into three dimensional geological units, which is a common problem for many students. Today's earth science students use a variety of skills and processes during their learning experience including spatial thinking, image construction, detecting patterns, making predictions and deducing the orientation of themselves. 3D geological models can reinforce spatial thinking strategies and encourage students to think about processes and properties, in turn helping the student to recognise pre-learnt geological principles in the field and to convert what they see at the surface into a picture of what is going on at depth. The British Geological Survey (BGS) has been producing digital 3D geological models for over 10 years. The models produced are revolutionising the working practices, data standards and products of the BGS. Sharing our geoscience information with academia is highlighted throughout the BGS strategy as is instilling practical skills in future geoscience professionals, such as model building and interpretation. In 2009 a project was launched to investigate the potential of the models as a teaching resource. The study included justifying if and how the models help students to learn, how models have been used historically, and how other forms of modelling are being used today. BGS now produce 3D geological models for use by anyone teaching or learning geoscience. They incorporate educational strategies that will develop geospatial skills and alleviate potential problems that some students experience. They are contained within contemporary case studies and show standard geological concepts, structures, sedimentary rocks, cross sections and field techniques. 3D geological models of the Isle of Wight and Ingleborough along with accompanying education material and a video tutorial guide are currently available to the public on our website www.bgs.ac.uk. 2014 will see the launch of a further 5-6 models, each illustrating different geological locations, rock types and complexities. This poster aims to show the methodology and techniques for generating a 3D geological model. It will provide background information on the project and how these models can be used as a teaching resource, either in a formal classroom setting or as a distance learning tool. The model allows the student to take part in virtual fieldwork, by viewing the landscape in association with the geological structures and processes that have shaped it.

Identification of different geologic units using fuzzy constrained resistivity tomography

NASA Astrophysics Data System (ADS)

Singh, Anand; Sharma, S. P.

2018-01-01

Different geophysical inversion strategies are utilized as a component of an interpretation process that tries to separate geologic units based on the resistivity distribution. In the present study, we present the results of separating different geologic units using fuzzy constrained resistivity tomography. This was accomplished using fuzzy c means, a clustering procedure to improve the 2D resistivity image and geologic separation within the iterative minimization through inversion. First, we developed a Matlab-based inversion technique to obtain a reliable resistivity image using different geophysical data sets (electrical resistivity and electromagnetic data). Following this, the recovered resistivity model was converted into a fuzzy constrained resistivity model by assigning the highest probability value of each model cell to the cluster utilizing fuzzy c means clustering procedure during the iterative process. The efficacy of the algorithm is demonstrated using three synthetic plane wave electromagnetic data sets and one electrical resistivity field dataset. The presented approach shows improvement on the conventional inversion approach to differentiate between different geologic units if the correct number of geologic units will be identified. Further, fuzzy constrained resistivity tomography was performed to examine the augmentation of uranium mineralization in the Beldih open cast mine as a case study. We also compared geologic units identified by fuzzy constrained resistivity tomography with geologic units interpreted from the borehole information.

Geochemical, aeromagnetic, and generalized geologic maps showing distribution and abundance of molybdenum and zinc, Golconda and Iron Point quadrangles, Humboldt County, Nevada

USGS Publications Warehouse

Erickson, R.L.; Marsh, S.P.

1972-01-01

This series of maps shows the distribution and abundance of mercury, arsenic, antimony, tungsten, gold, copper, lead, and silver related to a geologic and aeromagnetic base in the Golconda and Iron Point 7½-minute quadrangles. All samples are rock samples; most are from shear or fault zones, fractures, jasperoid, breccia reefs, and altered rocks. All the samples were prepared and analyzed in truck-mounted laboratories at Winnemucca, Nevada. Arsenic, tungsten, copper, lead, and silver were determined by semiquantitative spectrographic methods by D.F. Siems and E.F. Cooley. Mercury and gold were determined by atomic absorption methods and antimony was determined by wet chemical methods by R.M. O'Leary, M.S. Erickson, and others.

77 FR 11565 - Agency Information Collection: Comment Request AGENCY: United States Geological Survey (USGS...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-02-27

... CONTACT: Douglas A. Howard, Associate Program Coordinator NCGMP (STATEMAP and EDMAP), USGS Geological... colleges and universities in the United States and Puerto Rico through an annual competitive cooperative agreement process. Every federal dollar that is awarded is matched with university funds. Geology professors...

A Writing Template for Probing Students' Geological Sense of Place

ERIC Educational Resources Information Center

Clary, Renee M.; Wandersee, James H.

2006-01-01

Because many incoming geoscience students did not acknowledge their previous personal encounters with the earth's geological processes or products, we developed the Geological Sense of Place (GSP) template as a convenient way to assess students' earth science backgrounds through short answer, mini-essay, and induced associative responses. The GSP…

Landslides: Geomorphology and Sea Cliff Hazard Potential, Santa Barbara - Isla Vista, California J.F. Klath and E.A. Keller

NASA Astrophysics Data System (ADS)

Klath, J. F.; Keller, E. A.

2015-12-01

Coastal areas are often characterized by high population densities in an ever changing, dynamic environment. The world's coasts are often dominated by steeply sloping sea cliffs, the morphology of which reflects rock type, wave erosion, and surface erosion, as well as human activities such changing vegetation, urban runoff, and construction of coastal defenses. The Santa Barbara and Goleta area, with over 17 km of sea cliffs and beaches, extends from Santa Barbara Point west to the hamlet of Isla Vista. A deeper understanding of the local geology and the physical processes generating slope failure and, thus, landward cliff retreat is important for general public safety, as well as future development and planning. Our research objective includes assessment of landslide hazard potential through investigation of previous landslides and how these events relate to various physical variables and characteristics within the surrounding bedrock. How does landslide frequency, volume, and type relate to varying local bedrock and structure? Two geologic formations dominate the sea cliffs of the Santa Barbara area: Monterey shale (upper, middle, and lower) and Monterey Sisquoc shale. Geology varies from hard cemented shale and diatomaceous, low specific gravity shale to compaction shale. Variations in landslide characteristics are linked closely to the geology of a specific site that affects how easily rock units are weathered and eroded by wave erosion, naturally occurring oil and water seeps, burnt shale events, and landslide type and frequency on steeply dipped bedding planes/daylighting beds. Naturally occurring features linked to human processes often weaken bedrock and, thus, increase the likelihood of landslides. We categorize landslide frequency, type, and triggers; location of beach access, drainage pipes, and water; and oil and tar seeps in order to develop suggestions to minimize landslide potential. Lastly, using previously published erosion cliff retreat rates and sea level rise estimates, a map displaying likely position of the coastline by 2100 will be created. This information will be useful to the county of Santa Barbara, California when considering future development and hazard mitigation plans.

Stress field modelling from digital geological map data

NASA Astrophysics Data System (ADS)

Albert, Gáspár; Barancsuk, Ádám; Szentpéteri, Krisztián

2016-04-01

To create a model for the lithospheric stress a functional geodatabase is required which contains spatial and geodynamic parameters. A digital structural-geological map is a geodatabase, which usually contains enough attributes to create a stress field model. Such a model is not accurate enough for engineering-geological purposes because simplifications are always present in a map, but in many cases maps are the only sources for a tectonic analysis. The here presented method is designed for field geologist, who are interested to see the possible realization of the stress field over the area, on which they are working. This study presents an application which can produce a map of 3D stress vectors from a kml-file. The core application logic is implemented on top of a spatially aware relational database management system. This allows rapid and geographically accurate analysis of the imported geological features, taking advantage of standardized spatial algorithms and indexing. After pre-processing the map features in a GIS, according to the Type-Property-Orientation naming system, which was described in a previous study (Albert et al. 2014), the first stage of the algorithm generates an irregularly spaced point cloud by emitting a pattern of points within a user-defined buffer zone around each feature. For each point generated, a component-wise approximation of the tensor field at the point's position is computed, derived from the original feature's geodynamic properties. In a second stage a weighted moving average method calculates the stress vectors in a regular grid. Results can be exported as geospatial data for further analysis or cartographic visualization. Computation of the tensor field's components is based on the implementation of the Mohr diagram of a compressional model, which uses a Coulomb fracture criterion. Using a general assumption that the main principal stress must be greater than the stress from the overburden, the differential stress is calculated from the fracture criterion. The calculation includes the gravitational acceleration, the average density of rocks and the experimental 60 degree of the fracture angle from the normal of the fault plane. This way, the stress tensors are calculated as absolute pressure values per square meters on both sides of the faults. If the stress from the overburden is greater than 1 bar (i.e. the faults are buried), a confined compression would be present. Modelling this state of stress may result a confusing pattern of vectors, because in a confined position the horizontal stress vectors may point towards structures primarily associated with extension. To step over this, and to highlight the variability in the stress-field, the model calculates the vectors directly from the differential stress (practically subtracting the minimum principal stress from the critical stress). The result of the modelling is a vector map, which theoretically represents the minimum tectonic pressure in the moment, when the rock body breaks from an initial state. This map - together with the original fault-map - is suitable for determining those areas where unrevealed tectonic, sedimentary and lithological structures are possibly present (e.g. faults, sub-basins and intrusions). With modelling different deformational phases on the same area, change of the stress vectors can be detected which reveals not only the varying directions of the principal stresses, but the tectonic-driven sedimentation patterns too. The decrease of necessary critical stress in the case of a possible reactivation of a fault in subsequent deformation phase can be managed with the down-ranking of the concerning structural elements. Reference: Albert G., Ungvári ZS., Szentpéteri K. 2014: Modeling the present day stress field of the Pannonian Basin from neotectonic maps - In: Beqiraj A, Ionescu C, Christofides G, Uta A, Beqiraj Goga E, Marku S (eds.) Proceedings XX Congress of the Carpathian-Balkan Geological Association. Tirana: p. 2.

A Fast Full Tensor Gravity computation algorithm for High Resolution 3D Geologic Interpretations

NASA Astrophysics Data System (ADS)

Jayaram, V.; Crain, K.; Keller, G. R.

2011-12-01

We present an algorithm to rapidly calculate the vertical gravity and full tensor gravity (FTG) values due to a 3-D geologic model. This algorithm can be implemented on single, multi-core CPU and graphical processing units (GPU) architectures. Our technique is based on the line element approximation with a constant density within each grid cell. This type of parameterization is well suited for high-resolution elevation datasets with grid size typically in the range of 1m to 30m. The large high-resolution data grids in our studies employ a pre-filtered mipmap pyramid type representation for the grid data known as the Geometry clipmap. The clipmap was first introduced by Microsoft Research in 2004 to do fly-through terrain visualization. This method caches nested rectangular extents of down-sampled data layers in the pyramid to create view-dependent calculation scheme. Together with the simple grid structure, this allows the gravity to be computed conveniently on-the-fly, or stored in a highly compressed format. Neither of these capabilities has previously been available. Our approach can perform rapid calculations on large topographies including crustal-scale models derived from complex geologic interpretations. For example, we used a 1KM Sphere model consisting of 105000 cells at 10m resolution with 100000 gravity stations. The line element approach took less than 90 seconds to compute the FTG and vertical gravity on an Intel Core i7 CPU at 3.07 GHz utilizing just its single core. Also, unlike traditional gravity computational algorithms, the line-element approach can calculate gravity effects at locations interior or exterior to the model. The only condition that must be met is the observation point cannot be located directly above the line element. Therefore, we perform a location test and then apply appropriate formulation to those data points. We will present and compare the computational performance of the traditional prism method versus the line element approach on different CPU-GPU system configurations. The algorithm calculates the expected gravity at station locations where the observed gravity and FTG data were acquired. This algorithm can be used for all fast forward model calculations of 3D geologic interpretations for data from airborne, space and submarine gravity, and FTG instrumentation.

OWL representation of the geologic timescale implementing stratigraphic best practice

NASA Astrophysics Data System (ADS)

Cox, S. J.

2011-12-01

The geologic timescale is a cornerstone of the earth sciences. Versions are available from many sources, with the following being of particular interest: (i) The official International Stratigraphic Chart (ISC) is maintained by the International Commission for Stratigraphy (ICS), following principles developed over the last 40 years. ICS provides the data underlying the chart as part of a specialized software package, and the chart itself as a PDF using the standard colours; (ii) ITC Enschede has developed a representation of the timescale as a thesaurus in SKOS, used in a Web Map Service delivery system; (iii) JPL's SWEET ontology includes a geologic timescale. This takes full advantage of the capabilities of OWL. However, each of these has limitations - The ISC falls down because of incompatibility with web technologies; - While SKOS supports multilingual labelling, SKOS does not adequately support timescale semantics, in particular since it does not include ordering relationships; - The SWEET version (as of version 2) is not fully aligned to the model used by ICS, in particular not recognizing the role of the Global Boundary Stratotype Sections and Point (GSSP). Furthermore, it is distributed as static documents, rather than through a dynamic API using SPARQL. The representation presented in this paper overcomes all of these limitations as follows: - the timescale model is formulated as an OWL ontology - the ontology is directly derived from the UML representation of the ICS best practice proposed by Cox & Richard [2005], and subsequently included as the Geologic Timescale package in GeoSciML (http://www.geosciml.org); this includes links to GSSPs as per the ICS process - key properties in the ontology are also asserted to be subProperties of SKOS properties (topConcept and broader/narrower relations) in order to support SKOS-based queries; SKOS labelling is used to support multi-lingual naming and synonyms - the International Stratigraphic Chart is implemented as a set of instances of classes from the ontology, and published through a SPARQL end-point - the elements of the Stratigraphic chart are linked to the corresponding elements in SWEET (Raskin et al., 2011) and DBpedia to support traceability between different commonly accessed representations. The ontology builds on standard geospatial information models, including the Observations and Measurements model (ISO 19156), and GeoSciML. This allows the ages given in the chart to be linked to the evidence basis found in the associated GeoSciML features.

Efficient Geological Modelling of Large AEM Surveys

NASA Astrophysics Data System (ADS)

Bach, Torben; Martlev Pallesen, Tom; Jørgensen, Flemming; Lundh Gulbrandsen, Mats; Mejer Hansen, Thomas

2014-05-01

Combining geological expert knowledge with geophysical observations into a final 3D geological model is, in most cases, not a straight forward process. It typically involves many types of data and requires both an understanding of the data and the geological target. When dealing with very large areas, such as modelling of large AEM surveys, the manual task for the geologist to correctly evaluate and properly utilise all the data available in the survey area, becomes overwhelming. In the ERGO project (Efficient High-Resolution Geological Modelling) we address these issues and propose a new modelling methodology enabling fast and consistent modelling of very large areas. The vision of the project is to build a user friendly expert system that enables the combination of very large amounts of geological and geophysical data with geological expert knowledge. This is done in an "auto-pilot" type functionality, named Smart Interpretation, designed to aid the geologist in the interpretation process. The core of the expert system is a statistical model that describes the relation between data and geological interpretation made by a geological expert. This facilitates fast and consistent modelling of very large areas. It will enable the construction of models with high resolution as the system will "learn" the geology of an area directly from interpretations made by a geological expert, and instantly apply it to all hard data in the survey area, ensuring the utilisation of all the data available in the geological model. Another feature is that the statistical model the system creates for one area can be used in another area with similar data and geology. This feature can be useful as an aid to an untrained geologist to build a geological model, guided by the experienced geologist way of interpretation, as quantified by the expert system in the core statistical model. In this project presentation we provide some examples of the problems we are aiming to address in the project, and show some preliminary results.

Metamorphic geology: Why should we care?

NASA Astrophysics Data System (ADS)

Tajcmanova, Lucie; Moulas, Evangelos; Vrijmoed, Johannes

2016-04-01

Estimation of pressure-temperature (P-T) from petrographic observations in metamorphic rocks has become a common practice in petrology studies during the last 50 years. This data then often serves as a key input in geodynamic reconstructions and thus directly influences our understanding of lithospheric processes. Such an approach might have led the metamorphic geology field to a certain level of quiescence. Obtaining high-quality analytical data from metamorphic rocks has become a standard part of geology studies. The numerical tools for geodynamic reconstructions have evolved to a great extend as well. Furthermore, the increasing demand on using the Earth's interior for sustainable energy or nuclear waste disposal requires a better understanding of the physical processes involved in fluid-rock interaction. However, nowadays, metamorphic data have apparently lost their importance in the "bigger picture" of the Earth sciences. Interestingly, the suppression of the metamorphic geology discipline limits the potential for understanding the aforementioned physical processes that could have been exploited. In fact, those phenomena must be considered in the development of new generations of fully coupled numerical codes that involve reacting materials with changing porosity while obeying conservation of mass, momentum and energy. In our contribution, we would like to discuss the current role of metamorphic geology. We will bring food for thoughts and specifically touch upon the following questions: How can we revitalize metamorphic geology? How can we increase the importance of it? How can metamorphic geology contribute to societal issues?

Ways forward in quantifying data uncertainty in geological databases

NASA Astrophysics Data System (ADS)

Kint, Lars; Chademenos, Vasileios; De Mol, Robin; Kapel, Michel; Lagring, Ruth; Stafleu, Jan; van Heteren, Sytze; Van Lancker, Vera

2017-04-01

Issues of compatibility of geological data resulting from the merging of many different data sources and time periods may jeopardize harmonization of data products. Important progress has been made due to increasing data standardization, e.g., at a European scale through the SeaDataNet and Geo-Seas data management infrastructures. Common geological data standards are unambiguously defined, avoiding semantic overlap in geological data and associated metadata. Quality flagging is also applied increasingly, though ways in further propagating this information in data products is still at its infancy. For the Belgian and southern Netherlands part of the North Sea, databases are now rigorously re-analyzed in view of quantifying quality flags in terms of uncertainty to be propagated through a 3D voxel model of the subsurface (https://odnature.naturalsciences.be/tiles/). An approach is worked out to consistently account for differences in positioning, sampling gear, analysis procedures and vintage. The flag scaling is used in the interpolation process of geological data, but will also be used when visualizing the suitability of geological resources in a decision support system. Expert knowledge is systematically revisited as to avoid totally inappropriate use of the flag scaling process. The quality flagging is also important when communicating results to end-users. Therefore, an open data policy in combination with several processing tools will be at the heart of a new Belgian geological data portal as a platform for knowledge building (KB) and knowledge management (KM) serving the marine geoscience, the policy community and the public at large.

The use of U.S. Geological Survey CD-ROM-based petroleum assessments in undergraduate geology laboratories

USGS Publications Warehouse

Eves, R.L.; Davis, L.E.; Dyman, T.S.; Takahashi, K.I.

2002-01-01

Domestic oil production is declining and United States reliance on imported oil is increasing. America will be faced with difficult decisions that address the strategic, economic, and political consequences of its energy resources shortage. The geologically literate under-graduate student needs to be aware of current and future United States energy issues. The U.S. Geological Survey periodically provides energy assessment data via digitally-formatted CD-ROM publications. These publications are free to the public, and are well suited for use in undergraduate geology curricula. The U.S. Geological Survey (USGS) 1995 National Assessment of United States Oil and Gas Resources (Digital Data Series or DDS-30) (Gautier and others, 1996) is an excellent resource for introducing students to the strategies of hydrocarbon exploration and for developing skills in problem-solving and evaluating real data. This paper introduces the reader to DDS-30, summarizes the essential terminology and methodology of hydrocarbon assessment, and offers examples of exercises or questions that might be used in the introductory classroom. The USGS contact point for obtaining DDS-30 and other digital assessment volumes is also provided. Completing the sample exercises in this report requires a copy of DDS-30.

Geologic Map of the Wilderness and Handy Quadrangles, Oregon, Carter, and Ripley Counties, Missouri

USGS Publications Warehouse

Harrison, Richard W.; McDowell, Robert C.

2003-01-01

The bedrock exposed in the Wilderness and Handy Quadrangles, Missouri, comprises Early Ordovician aged dolomite, sandstone, and chert. The sedimentary rocks are nearly flat-lying except where they are adjacent to faults. The carbonate rocks are karstified and the area contains numerous sinkholes, springs, caves, and losing-streams. This map is one of several being produced under the U.S. Geological Survey National Cooperative Geologic Mapping Program to provide geologic data applicable to land-use problems in the Ozarks of south-central Missouri. Ongoing and potential industrial and agricultural development in the Ozarks region has presented issues of ground-water quality in karst areas. These quadrangles contain significant areas of the Mark Twain National Forest, including part of the Eleven Point National Scenic Riverway and the Irish Wilderness Roadless Area. A National Park in this region (Ozark National Scenic Riverways, Missouri ) is concerned about the effects of activities in areas outside of their stewardship on the water resources that define the heart of this Park. This task applies geologic mapping and karst investigations to address issues surrounding competing land use in south-central Missouri. For more information see: http://geology.er.usgs.gov/eespteam/Karst/index.html

Geomorphic effectiveness of a long profile shape and the role of inherent geological controls in the Himalayan hinterland area of the Ganga River basin, India

NASA Astrophysics Data System (ADS)

Sonam; Jain, Vikrant

2018-03-01

Long profiles of rivers provide a platform to analyse interaction between geological and geomorphic processes operating at different time scales. Identification of an appropriate model for river long profile becomes important in order to establish a quantitative relationship between the profile shape, its geomorphic effectiveness, and inherent geological characteristics. This work highlights the variability in the long profile shape of the Ganga River and its major tributaries, its impact on stream power distribution pattern, and role of the geological controls on it. Long profile shapes are represented by the sum of two exponential functions through the curve fitting method. We have shown that coefficients of river long profile equations are governed by the geological characteristics of subbasins. These equations further define the spatial distribution pattern of stream power and help to understand stream power variability in different geological terrains. Spatial distribution of stream power in different geological terrains successfully explains spatial variability in geomorphic processes within the Himalayan hinterland area. In general, the stream power peaks of larger rivers lie in the Higher Himalaya, and rivers in the eastern hinterland area are characterised by the highest magnitude of stream power.

Geoscientific Mapping of Vesta by the Dawn Mission

NASA Technical Reports Server (NTRS)

Jaumann, R.; Pieters, C. M.; Neukum, G.; Mottola, S.; DeSanctis, M. C.; Russell, C. T.; Raymond, C. A.; McSween, H. Y.; Roatsch, T.; Nathues, A.;

Taking geoscience to the IMAX: 3D and 4D insight into geological processes using micro-CT

NASA Astrophysics Data System (ADS)

Dobson, Katherine; Dingwell, Don; Hess, Kai-Uwe; Withers, Philip; Lee, Peter; Pistone, Mattia; Fife, Julie; Atwood, Robert

2015-04-01

Geology is inherently dynamic, and full understanding of any geological system can only be achieved by considering the processes by which change occurs. Analytical limitations mean understanding has largely developed from ex situ analyses of the products of geological change, rather than of the processes themselves. Most methods essentially utilise "snap shot" sampling: and from thin section petrography to high resolution crystal chemical stratigraphy and field volcanology, we capture an incomplete view of a spatially and temporally variable system. Even with detailed experimental work, we can usually only analyse samples before and after we perform an experiment, as routine analysis methods are destructive. Serial sectioning and quenched experiments stopped at different stages can give some insight into the third and fourth dimension, but the true scaling of the processes from the laboratory to the 4D (3D + time) geosphere is still poorly understood. Micro computed tomography (XMT) can visualise the internal structures and spatial associations within geological samples non-destructively. With image resolutions of between 200 microns and 50 nanometres, tomography has the ability to provide a detailed sample assessment in 3D, and quantification of mineral associations, porosity, grain orientations, fracture alignments and many other features. This allows better understanding of the role of the complex geometries and associations within the samples, but the challenge of capturing the processes that generate and modify these structures remains. To capture processes, recent work has focused on developing experimental capability for in situ experiments on geological materials. Data presented will showcase examples from recent experiments where high speed synchrotron x-ray tomography has been used to acquire each 3D image in under 2 seconds. We present a suite of studies that showcase how it is now possible to take quantification of many geological processed into 3D and 4D. This will include tracking the interactions between bubbles and crystals in a deforming magma, the dissolution of individual mineral grains from low grade ores, and quantification of three phase flow in sediments and soils. Our aim is to demonstrate how XMT can provide new insight into dynamic processes in all geoscience disciplines, and give you some insight into where 4D geoscience could take us next.

Enhancing DInSAR capabilities for landslide monitoring by applying GIS-based multicriteria filtering analysis

NASA Astrophysics Data System (ADS)

Beyene, F.; Knospe, S.; Busch, W.

2015-04-01

Landslide detection and monitoring remain difficult with conventional differential radar interferometry (DInSAR) because most pixels of radar interferograms around landslides are affected by different error sources. These are mainly related to the nature of high radar viewing angles and related spatial distortions (such as overlays and shadows), temporal decorrelations owing to vegetation cover, and speed and direction of target sliding masses. On the other hand, GIS can be used to integrate spatial datasets obtained from many sources (including radar and non-radar sources). In this paper, a GRID data model is proposed to integrate deformation data derived from DInSAR processing with other radar origin data (coherence, layover and shadow, slope and aspect, local incidence angle) and external datasets collected from field study of landslide sites and other sources (geology, geomorphology, hydrology). After coordinate transformation and merging of data, candidate landslide representing pixels of high quality radar signals were filtered out by applying a GIS based multicriteria filtering analysis (GIS-MCFA), which excludes grid points in areas of shadow and overlay, low coherence, non-detectable and non-landslide deformations, and other possible sources of errors from the DInSAR data processing. At the end, the results obtained from GIS-MCFA have been verified by using the external datasets (existing landslide sites collected from fieldworks, geological and geomorphologic maps, rainfall data etc.).

Viscous remanent magnetization model for the Broken Ridge satellite magnetic anomaly

NASA Technical Reports Server (NTRS)

Johnson, B. D.

1985-01-01

An equivalent source model solution of the satellite magnetic field over Australia obtained by Mayhew et al. (1980) showed that the satellite anomalies could be related to geological features in Australia. When the processing and selection of the Magsat data over the Australian region had progressed to the point where interpretation procedures could be initiated, it was decided to start by attempting to model the Broken Ridge satellite anomaly, which represents one of the very few relatively isolated anomalies in the Magsat maps, with an unambiguous source region. Attention is given to details concerning the Broken Ridge satellite magnetic anomaly, the modeling method used, the Broken Ridge models, modeling results, and characteristics of magnetization.

Ground-based lidar beach topography of Fire Island, New York, April 2013

USGS Publications Warehouse

Brenner, Owen T.; Hapke, Cheryl J.; Spore, Nicholas J.; Brodie, Katherine L.; McNinch, Jesse E.

2015-01-01

The U.S. Geological Survey (USGS) St. Petersburg Coastal and Marine Science Center in Florida and the U.S. Army Corps of Engineers Field Research Facility in Duck, North Carolina, collaborated to gather alongshore ground-based lidar beach elevation data at Fire Island, New York. This high-resolution elevation dataset was collected on April 10, 2013, to characterize beach topography following substantial erosion that occurred during Hurricane Sandy, which made landfall on October 29, 2012, and multiple, strong winter storms. The ongoing beach monitoring is part of the Hurricane Sandy Supplemental Project GS2-2B. This USGS data series includes the resulting processed elevation point data (xyz) and an interpolated digital elevation model (DEM).

Chemical, thermal and impact processing of asteroids

NASA Technical Reports Server (NTRS)

Scott, E. R. D.; Taylor, G. J.; Newsom, H. E.; Herbert, F.; Zolensky, M.

1989-01-01

The geological effects of impacts, heating, melting, core formation, and aqueous alteration on asteroids are reviewed. A review of possible heat sources appears to favor an important role for electrical induction heating. The effects of each geologic process acting individually and in combination with others, are considered; it is concluded that there is much evidence for impacts during alteration, metamorphism and melting. These interactions vastly increased the geologic diversity of the asteroid belt. Subsequent impacts of cool asteroids did not reduce this diversity. Instead new rock types were created by mixing, brecciation and minor melting.

Geothermal Target Areas in Colorado as Identified by Remote Sensing Techniques

DOE Data Explorer

Khalid Hussein

2012-02-01

This layer contains the areas identified as targets of potential geothermal activity. The Criteria used to identify the target areas include: hot/warm surface exposures modeled from ASTER/Landsat satellite imagery and geological characteristics, alteration mineral commonly associated with hot springs (clays, Si, and FeOx) modeled from ASTER and Landsat data, Colorado Geological Survey (CGS) known thermal hot springs/wells and heat-flow data points, Colorado deep-seated fault zones, weakened basement identified from isostatic gravity data, and Colorado sedimentary and topographic characteristics.

State geological surveys: Their growing national role in policy

USGS Publications Warehouse

Gerhard, L.C.

2000-01-01

State geological surveys vary in organizational structure, but are political powers in the field of geology by virtue of their intimate knowledge of and involvement in legislative and political processes. Origins of state geological surveys lie in the recognition of society that settlement and prosperity depended on access to a variety of natural resources, resources that are most familiar to geologists. As the surveys adapt to modern societal pressures, making geology serve the public has become the new mission for many state geological surveys. Geologic mapping was the foundation of most early surveys, and the state surveys have brought mapping back into the public realm to meet today's challenges of growing population density, living environment desires, and resource access.

Investigating the 3-D Subduction Initiation Processes at Transform Faults and Passive Margins

NASA Astrophysics Data System (ADS)

Peng, H.; Leng, W.

2017-12-01

Studying the processes of subduction initiation is a key for understanding the Wilson cycle and improving the theory of plate tectonics. Previous studies investigated subduction initiation with geological synthesis and geodynamic modeling methods, discovering that subduction intends to initiate at the transform faults close to oceanic arcs, and that its evolutionary processes and surface volcanic expressions are controlled by plate strength. However, these studies are mainly conducted with 2-D models, which cannot deal with lateral heterogeneities of crustal thickness and strength along the plate interfaces. Here we extend the 2-D model to a 3-D parallel subduction model with high computational efficiency. With the new model, we study the dynamic controlling factors, morphology evolutionary processes and surface expressions for subduction initiation with lateral heterogeneities of material properties along transform faults and passive margins. We find that lateral lithospheric heterogeneities control the starting point of the subduction initiation along the newly formed trenches and the propagation speed for the trench formation. New subduction tends to firstly initiate at the property changing point along the transform faults or passive margins. Such finds may be applied to explain the formation process of the Izu-Bonin-Mariana (IBM) subduction zone in the western Pacific and the Scotia subduction zone at the south end of the South America. Our results enhance our understanding for the formation of new trenches and help to provide geodynamic modeling explanations for the observed remnant slabs in the upper mantle and the surface volcanic expressions.

Miscellaneous High-Resolution Seismic Imaging Investigations in Salt Lake and Utah Valleys for Earthquake Hazards

USGS Publications Warehouse

Stephenson, W.J.; Williams, R.A.; Odum, J.K.; Worley, D.M.

2007-01-01

Introduction In support of earthquake hazards and ground motion studies by researchers at the Utah Geological Survey, University of Utah, Utah State University, Brigham Young University, and San Diego State University, the U.S. Geological Survey Geologic Hazards Team Intermountain West Project conducted three high-resolution seismic imaging investigations along the Wasatch Front between September 2003 and September 2005. These three investigations include: (1) a proof-of-concept P-wave minivib reflection imaging profile in south-central Salt Lake Valley, (2) a series of seven deep (as deep as 400 m) S-wave reflection/refraction soundings using an S-wave minivib in both Salt Lake and Utah Valleys, and (3) an S-wave (and P-wave) investigation to 30 m at four sites in Utah Valley and at two previously investigated S-wave (Vs) minivib sites. In addition, we present results from a previously unpublished downhole S-wave investigation conducted at four sites in Utah Valley. The locations for each of these investigations are shown in figure 1. Coordinates for the investigation sites are listed in Table 1. With the exception of the P-wave common mid-point (CMP) reflection profile, whose end points are listed, these coordinates are for the midpoint of each velocity sounding. Vs30 and Vs100, also shown in Table 1, are defined as the average shear-wave velocities to depths of 30 and 100 m, respectively, and details of their calculation can be found in Stephenson and others (2005). The information from these studies will be incorporated into components of the urban hazards maps along the Wasatch Front being developed by the U.S. Geological Survey, Utah Geological Survey, and numerous collaborating research institutions.

Processes and controls in swelling anhydritic clay rocks

NASA Astrophysics Data System (ADS)

Mutschler, Thomas; Blum, Philipp; Butscher, Christoph

2015-04-01

Referring to the swelling of anhydritic clay rocks in tunneling, Leopold Müller-Salzburg noted in the third volume on tunneling of his fundamental text book on rock engineering that "a truly coherent explanation of these phenomena is still owing" (Müller-Salzburg 1978, p. 306). This valuation is still true after more than three decades of research in the field of swelling anhydritic clay rocks. One of the reasons is our limited knowledge of the processes involved in the swelling of such rocks, and of the geological, mineralogical, hydraulic, chemical and mechanical controls of the swelling. In this contribution, a review of processes in swelling anhydritic clay rocks and of associated controls is presented. Also numerical models that aim at simulating the swelling processes and controls are included in this review, and some of the remaining open questions are pointed out. By focusing on process-oriented work in this review, the presentation intends to stimulate further research across disciplines in the field of swelling anhydritic clay rocks to finally get a step further in managing the swelling problem in geotechnical engineering projects. Keywords: swelling; anhydritic clay rocks; review

U.S. Geological Survey Subsidence Interest Group conference, Edwards Air Force Base, Antelope Valley, California, November 18-19, 1992; abstracts and summary

USGS Publications Warehouse

Prince, Keith R.; Galloway, Devin L.; Leake, Stanley A.

1995-01-01

Land subsidence, the loss of surface elevation as a result of the removal of subsurface support, affects every state in the United States. More than 17,000 mi2 of land in the United States has been lowered by the various processes that produce land subsidence with annual costs from resulting flooding and structural damage that exceed $125 million. It is estimated that an additional $400 million is spent nationwide in attempts to control subsidence. Common causes of land subsidence include the removal of oil, gas, and water from underground reservoirs; dissolution of limestone aquifers (sinkholes); underground mining activities; drainage of organic soils; and hydrocompaction (the initial wetting of dry soils). Overdrafting of aquifers is the major cause of areally extensive land subsidence, and as ground-water pumping increases, land subsidence also will increase. Land subsidence and its effects on engineering structures have been recognized for centuries, but it was not until this century that the processes that produce land subsidence were identified and understood. In 1928, while working with field data from a test of the Dakota Sandstone aquifer, O.E. Meinzer of the U.S. Geological Survey recognized the compressibility of aquifers. Around the same time, Karl Terzaghi, a soil scientist working at Harvard University, developed the one-dimensional consolidation theory that provided a quantitative means of predicting soil compaction resulting from the drainage of compressible soils. Thus, with the recognition of the compressibility of aquifers (Meinzer), and the development of a quantitative means of predicting soil compaction as a consequence of the reduction of intergranular pore pressure (Terzaghi), the theory of aquifer-system compaction was formed. With the widespread availa- bility of electric power in rural areas, and the advent of the deep turbine pump, ground-water withdrawals increased dramatically throughout the country in the 1940's and 1950's. Along with this unprecedented increase in pumpage, substantial amounts of land subsidence were observed in several areas of the United States, most notably in Arizona, California, and Texas. Beginning in 1955, under the direction of Joseph Poland, the Geological Survey began the "Mechanics of Aquifers Project," which focused largely on the processes that resulted in land subsidence due to the withdrawal of ground water. This research team gained international renown as they advanced the scientific understanding of aquifer mechanics and land-subsidence theory. The results of field studies by members of this research group not only verified the validity of the application of Terzaghi's consolidation theory to compressible aquifers, but they also provided definitions, methods of quantification, and confirmation of the interrelation among hydraulic head declines, aquifer-system compaction, and land subsidence. In addition to conducting pioneering research, this group also formed a "center of expertise," providing a focal point within the Geological Survey for the dissemination of technology and scientific understanding in aquifer mechanics. However, when the "Mechanics of Aquifers Project" was phased out in 1984, the focal point for technology transfer no longer existed. Interest among various state and local agencies in land subsidence has persisted, and the Geological Survey has continued to participate in a broad spectrum of cooperative and Federally funded projects in aquifer mechanics and land subsidence. These projects are designed to identify and monitor areas with the potential for land subsidence, to conduct basic research in the processes that control land subsidence and the development of earth fissures, as well as to develop new quantitative tools to predict aquifer-system deformation. In 1989 an ad hoc "Aquifer Mechanics and Subsidence Interest Group" (referred to herein as the "Subsidence Interest Group") was formed

High Resolution Analysis of Dyke Tips and Segments, Using Drones

NASA Astrophysics Data System (ADS)

Dering, G.; Micklethwaite, S.; Cruden, A. R.

2016-12-01

We analyse outstanding exposures of dykes from both coastal (Western Australia) and high altitude glacier-polished (Sierra Nevada, California) outcrops, representing intrusion at shallow upper-crustal and mid-crustal conditions respectively. We covered 10,000 m^2 of outcrop area sampling the ground at a scale of 3-5 mm per pixel. Using Structure-from-Motion photogrammetry from ground-based and UAV photographs lacking GPS camera positions (>500 images per study), we generated and calibrated a 3D geometry of dense point clouds by selectively using 25-30 ground control points measured by high precision GPS (40-90 mm error). Ground control points used in the photogrammetric model building process typically yielded a root mean square error (RMSE) of 5 cm. Half the ground control points were withheld from the model building process and when they were compared against the model they yielded RMSE values only 6-10% higher than the points used for georeferencing, suggesting good internal consistency of the dataset and accuracy relative to the reference frame, at least for the purposes of this study. The structural orientations of the dykes and associated fractures were then extracted digitally using the iterative Random Sample Consensus method (RANSAC) and least-squares plane fitting. Furthermore, fracture intensity relative to dykes was measured along a series of scanlines and the running average and variance calculated. All results were compared against field measurements. Results show fracture intensity increases toward the dykes in the shallow crustal examples (West Australia) but no such fractures exist around the mid-crustal (Californian) dykes. Despite this there is a remarkable uniformity of geometry, and by implication process, between the two dyke sets. In order to extract full value from the big visual data now available to us, the near-future requires dedicated research into software solutions for expert-driven, semi-automatic mapping of geology and structure.

Basic Research Needs for Electrical Energy Storage. Report of the Basic Energy Sciences Workshop on Electrical Energy Storage, April 2-4, 2007

DOE R&D Accomplishments Database

Goodenough, J. B.; Abruna, H. D.; Buchanan, M. V.

2007-04-04

To identify research areas in geosciences, such as behavior of multiphase fluid-solid systems on a variety of scales, chemical migration processes in geologic media, characterization of geologic systems, and modeling and simulation of geologic systems, needed for improved energy systems.

Sedimentary exhalative (sedex) zinc-lead-silver deposit model

USGS Publications Warehouse

Emsbo, Poul; Seal, Robert R.; Breit, George N.; Diehl, Sharon F.; Shah, Anjana K.

2016-10-28

This report draws on previous syntheses and basic research studies of sedimentary exhalative (sedex) deposits to arrive at the defining criteria, both descriptive and genetic, for sedex-type deposits. Studies of the tectonic, sedimentary, and fluid evolution of modern and ancient sedimentary basins have also been used to select defining criteria. The focus here is on the geologic characteristics of sedex deposit-hosting basins that contain greater than 10 million metric tons of zinc and lead. The enormous size of sedex deposits strongly suggests that basin-scale geologic processes are involved in their formation. It follows that mass balance constraints of basinal processes can provide a conceptual underpinning for the evaluation of potential ore-forming mechanisms and the identification of geologic indicators for ore potential in specific sedimentary basins. Empirical data and a genetic understanding of the physicochemical, geologic, and mass balance conditions required for each of these elements are used to establish a hierarchy of quantifiable geologic criteria that can be used in U.S. Geological Survey national assessments.  In addition, this report also provides a comprehensive evaluation of environmental considerations associated with the mining of sedex deposits.

Cognitive Factors that Impact Learning in the Field: Observations from an REU Project on Precambrian Rocks of Yellowstone National Park

NASA Astrophysics Data System (ADS)

Henry, D.; Mogk, D. W.; Goodwin, C.

2011-12-01

Field work requires cognitive processing on many different levels, and constitutes a powerful and important learning environment. To be effective and meaningful, the context of field work must be fully understood in terms of key research questions, earlier published work, regional geology, geologic history, and geologic processes. Scale(s) of observation and sample selection methods and strategies must be defined. Logistical decisions must be made about equipment needed, points of access, and navigation in the field. Professional skills such as field note-taking, measuring structural data, and rock descriptions must be employed, including appropriate use of field tools. Interpretations of geologic features in the field must be interpreted through recall of concepts from the geologic knowledge base (e.g. crystallization history of igneous rocks interpreted through phase diagrams). Field workers need to be able to self-monitor and self-regulate their actions (metacognitively), and make adjustments to daily plans as needed. The results of field work must be accurately and effectively communicated to other geoscientists. Personal and professional ethics and values are brought to bear as decisions are made about whether or not the work has been satisfactorily completed at a field site. And, all of this must be done against a back drop of environmental factors that affect the ability to do this work (e.g. inclement weather, bears, impassable landscapes). The simultaneous relevance of all these factors creates a challenging, but rewarding environment for learning on many different scales. During our REU project to study the Precambrian rocks in the back country of Yellowstone National Park (YNP), we considered these cognitive factors in designing our project curriculum. To reduce the "novelty space" of the project a website was developed that described the project goals and expected outcomes, introduced primary literature, and alerted students about the physical demands of working in YNP.. Daily field activities were designed to scaffold accrued knowledge by placing specific new experiences in the path of students to sequentially build their own understanding of local geology. Students gained increasing responsibility and autonomy for developing daily research objectives and plans, and for decision-making while in the field. Instructors demonstrated specific field skills, and used "talk-through" approaches to explain what, why, and how we conduct our own investigations. We were particularly interested in helping students make the first inscriptions of their interpretations of nature in field notes, sketches, and maps, and in using embodiment (positioning oneself in space to correctly make observations and collect data) to foster learning. In the course of this study we videotaped students in the field to document the evolution of their field skills. Observations, interviews and surveys of students indicate that students' confidence in their abilities to conduct geologic research in the field increased by 20-40% (Likert scale) in this project. By explicitly addressing cognitive demands, students working in the field can achieve significant learning gains.

High-resolution seismic-reflection data offshore of Dana Point, southern California borderland

USGS Publications Warehouse

Sliter, Ray W.; Ryan, Holly F.; Triezenberg, Peter J.

2010-01-01

The U.S. Geological Survey collected high-resolution shallow seismic-reflection profiles in September 2006 in the offshore area between Dana Point and San Mateo Point in southern Orange and northern San Diego Counties, California. Reflection profiles were located to image folds and reverse faults associated with the San Mateo fault zone and high-angle strike-slip faults near the shelf break (the Newport-Inglewood fault zone) and at the base of the slope. Interpretations of these data were used to update the USGS Quaternary fault database and in shaking hazard models for the State of California developed by the Working Group for California Earthquake Probabilities. This cruise was funded by the U.S. Geological Survey Coastal and Marine Catastrophic Hazards project. Seismic-reflection data were acquired aboard the R/V Sea Explorer, which is operated by the Ocean Institute at Dana Point. A SIG ELC820 minisparker seismic source and a SIG single-channel streamer were used. More than 420 km of seismic-reflection data were collected. This report includes maps of the seismic-survey sections, linked to Google Earth? software, and digital data files showing images of each transect in SEG-Y, JPEG, and TIFF formats.

PCTO-SIM: Multiple-point geostatistical modeling using parallel conditional texture optimization

NASA Astrophysics Data System (ADS)

Pourfard, Mohammadreza; Abdollahifard, Mohammad J.; Faez, Karim; Motamedi, Sayed Ahmad; Hosseinian, Tahmineh

2017-05-01

Multiple-point Geostatistics is a well-known general statistical framework by which complex geological phenomena have been modeled efficiently. Pixel-based and patch-based are two major categories of these methods. In this paper, the optimization-based category is used which has a dual concept in texture synthesis as texture optimization. Our extended version of texture optimization uses the energy concept to model geological phenomena. While honoring the hard point, the minimization of our proposed cost function forces simulation grid pixels to be as similar as possible to training images. Our algorithm has a self-enrichment capability and creates a richer training database from a sparser one through mixing the information of all surrounding patches of the simulation nodes. Therefore, it preserves pattern continuity in both continuous and categorical variables very well. It also shows a fuzzy result in its every realization similar to the expected result of multi realizations of other statistical models. While the main core of most previous Multiple-point Geostatistics methods is sequential, the parallel main core of our algorithm enabled it to use GPU efficiently to reduce the CPU time. One new validation method for MPS has also been proposed in this paper.

Mapping extent and change in surface mines within the United States for 2001 to 2006

USGS Publications Warehouse

Soulard, Christopher E.; Acevedo, William; Stehman, Stephen V.; Parker, Owen P.

2016-01-01

A complete, spatially explicit dataset illustrating the 21st century mining footprint for the conterminous United States does not exist. To address this need, we developed a semi-automated procedure to map the country's mining footprint (30-m pixel) and establish a baseline to monitor changes in mine extent over time. The process uses mine seed points derived from the U.S. Energy Information Administration (EIA), U.S. Geological Survey (USGS) Mineral Resources Data System (MRDS), and USGS National Land Cover Dataset (NLCD) and recodes patches of barren land that meet a “distance to seed” requirement and a patch area requirement before mapping a pixel as mining. Seed points derived from EIA coal points, an edited MRDS point file, and 1992 NLCD mine points were used in three separate efforts using different distance and patch area parameters for each. The three products were then merged to create a 2001 map of moderate-to-large mines in the United States, which was subsequently manually edited to reduce omission and commission errors. This process was replicated using NLCD 2006 barren pixels as a base layer to create a 2006 mine map and a 2001–2006 mine change map focusing on areas with surface mine expansion. In 2001, 8,324 km2 of surface mines were mapped. The footprint increased to 9,181 km2 in 2006, representing a 10·3% increase over 5 years. These methods exhibit merit as a timely approach to generate wall-to-wall, spatially explicit maps representing the recent extent of a wide range of surface mining activities across the country. 

The Importance of Mars Samples in Constraining the Geological and Geophysical Processes on Mars and the Nature of its Crust, Mantle, and Core

NASA Astrophysics Data System (ADS)

iMOST Team; Herd, C. D. K.; Ammannito, E.; Anand, M.; Debaille, V.; Hallis, L. J.; McCubbin, F. M.; Schmitz, N.; Usui, T.; Weiss, B. P.; Altieri, F.; Amelin, Y.; Beaty, D. W.; Benning, L. G.; Bishop, J. L.; Borg, L. E.; Boucher, D.; Brucato, J. R.; Busemann, H.; Campbell, K. A.; Carrier, B. L.; Czaja, A. D.; Des Marais, D. J.; Dixon, M.; Ehlmann, B. L.; Farmer, J. D.; Fernandez-Remolar, D. C.; Fogarty, J.; Glavin, D. P.; Goreva, Y. S.; Grady, M. M.; Harrington, A. D.; Hausrath, E. M.; Horgan, B.; Humayun, M.; Kleine, T.; Kleinhenz, J.; Mangold, N.; Mackelprang, R.; Mayhew, L. E.; McCoy, J. T.; McLennan, S. M.; McSween, H. Y.; Moser, D. E.; Moynier, F.; Mustard, J. F.; Niles, P. B.; Ori, G. G.; Raulin, F.; Rettberg, P.; Rucker, M. A.; Sefton-Nash, E.; Sephton, M. A.; Shaheen, R.; Shuster, D. L.; Siljestrom, S.; Smith, C. L.; Spry, J. A.; Steele, A.; Swindle, T. D.; ten Kate, I. L.; Tosca, N. J.; Van Kranendonk, M. J.; Wadhwa, M.; Werner, S. C.; Westall, F.; Wheeler, R. M.; Zipfel, J.; Zorzano, M. P.

2018-04-01

We present the main sample types from any potential Mars Sample Return landing site that would be required to constrain the geological and geophysical processes on Mars, including the origin and nature of its crust, mantle, and core.

A Bayesian Framework of Uncertainties Integration in 3D Geological Model

NASA Astrophysics Data System (ADS)

Liang, D.; Liu, X.

2017-12-01

3D geological model can describe complicated geological phenomena in an intuitive way while its application may be limited by uncertain factors. Great progress has been made over the years, lots of studies decompose the uncertainties of geological model to analyze separately, while ignored the comprehensive impacts of multi-source uncertainties. Great progress has been made over the years, while lots of studies ignored the comprehensive impacts of multi-source uncertainties when analyzed them item by item from each source. To evaluate the synthetical uncertainty, we choose probability distribution to quantify uncertainty, and propose a bayesian framework of uncertainties integration. With this framework, we integrated data errors, spatial randomness, and cognitive information into posterior distribution to evaluate synthetical uncertainty of geological model. Uncertainties propagate and cumulate in modeling process, the gradual integration of multi-source uncertainty is a kind of simulation of the uncertainty propagation. Bayesian inference accomplishes uncertainty updating in modeling process. Maximum entropy principle makes a good effect on estimating prior probability distribution, which ensures the prior probability distribution subjecting to constraints supplied by the given information with minimum prejudice. In the end, we obtained a posterior distribution to evaluate synthetical uncertainty of geological model. This posterior distribution represents the synthetical impact of all the uncertain factors on the spatial structure of geological model. The framework provides a solution to evaluate synthetical impact on geological model of multi-source uncertainties and a thought to study uncertainty propagation mechanism in geological modeling.

GIS representation of coal-bearing areas in Antarctica

USGS Publications Warehouse

Merrill, Matthew D.

2016-03-11

Understanding the distribution of coal-bearing geologic units in Antarctica provides information that can be used in sedimentary, geomorphological, paleontological, and climatological studies. This report is a digital compilation of information on Antarctica’s coal-bearing geologic units found in the literature. It is intended to be used in small-scale spatial geographic information system (GIS) investigations and as a visual aid in the discussion of Antarctica’s coal resources or in other coal-based geologic investigations. Instead of using spatially insignificant point markers to represent large coal-bearing areas, this dataset uses polygons to represent actual coal-bearing lithologic units. Specific locations of coal deposits confirmed from the literature are provided in the attribution for the coal-bearing unit polygons. Coal-sample-location data were used to confirm some reported coal-bearing geology. The age and extent of the coal deposits indicated in the literature were checked against geologic maps ranging from local scale at 1:50,000 to Antarctic continental scale at 1:5,000,000; if satisfactory, the map boundaries were used to generate the polygons for the coal-bearing localities.

An inventory of undiscovered Canadian mineral resources

NASA Technical Reports Server (NTRS)

Labovitz, M. L.; Griffiths, J. C.

1982-01-01

Unit regional value (URV) and unit regional weight are area standardized measures of the expected value and quantity, respectively, of the mineral resources of a region. Estimation and manipulation of the URV statistic is the basis of an approach to mineral resource evaluation. Estimates of the kind and value of exploitable mineral resources yet to be discovered in the provinces of Canada are used as an illustration of the procedure. The URV statistic is set within a previously developed model wherein geology, as measured by point counting geologic maps, is related to the historical record of mineral resource production of well-developed regions of the world, such as the 50 states of the U.S.A.; these may be considered the training set. The Canadian provinces are related to this training set using geological information obtained in the same way from geologic maps of the provinces. The desired predictions of yet to be discovered mineral resources in the Canadian provinces arise as a consequence. The implicit assumption is that regions of similar geology, if equally well developed, will produce similar weights and values of mineral resources.

Electromagnetic geophysical observation with controlled source

NASA Astrophysics Data System (ADS)

Hachay, Olga; Khachay, Oleg

2016-04-01

In the paper the new theoretical and methodical approaches are examined for detailed investigations of the structure and state of the geological medium, and its behavior as a dynamic system in reaction to external man-made influences. To solve this problem it is necessary to use geophysical methods that have sufficient resolution and that are built on more complicated models than layered or layered-block models. One of these methods is the electromagnetic induction frequency-geometrical method with controlled sources. Here we consider new approaches using this method for monitoring rock shock media by means of natural experiments and interpretation of the practical results. That method can be used by oil production in mines, where the same events of non stability can occur. The key ideas of twenty first century geophysics from the point of view of geologist academician A.N. Dmitrievskiy [Dmitrievskiy, 2009] are as follows. "The geophysics of the twenty first century is an understanding that the Earth is a self-developing, self-supporting geo-cybernetic system, in which the role of the driving mechanism is played by the field gradients; the evolution of geological processes is a continuous chain of transformations and the interaction of geophysical fields in the litho- hydro- and atmosphere. The use of geophysical principles of a hierarchical quantum of geophysical space, non-linear effects, and the effects of reradiating geophysical fields will allow the creation of a new geophysics. The research, in which earlier only pure geophysical processes and technologies were considered, nowadays tends to include into consideration geophysical-chemical processes and technologies. This transformation will allow us to solve the problems of forecasting geo-objects and geo-processes in previously unavailable geological-technological conditions." The results obtained allow us to make the following conclusions, according to the key ideas of academician A.N. Dmitrievskiy: the rock massif is a multi-ranked hierarchical structure. Research of the massif state dynamics, its structure and the effects of self-organization in it can be provided by geophysical methods, which are built upon the model of such medium. The use of the planshet multi-level induction electromagnetic method with a controlled source of excitation and a corresponding method of processing and interpretation has allowed us to reveal the disintegration zones which are indicators of massif stability and understand the causes of low productivity of oil recovery from boreholes.

Active Learning Techniques Applied to an Interdisciplinary Mineral Resources Course.

NASA Astrophysics Data System (ADS)

Aird, H. M.

2015-12-01

An interdisciplinary active learning course was introduced at the University of Puget Sound entitled 'Mineral Resources and the Environment'. Various formative assessment and active learning techniques that have been effective in other courses were adapted and implemented to improve student learning, increase retention and broaden knowledge and understanding of course material. This was an elective course targeted towards upper-level undergraduate geology and environmental majors. The course provided an introduction to the mineral resources industry, discussing geological, environmental, societal and economic aspects, legislation and the processes involved in exploration, extraction, processing, reclamation/remediation and recycling of products. Lectures and associated weekly labs were linked in subject matter; relevant readings from the recent scientific literature were assigned and discussed in the second lecture of the week. Peer-based learning was facilitated through weekly reading assignments with peer-led discussions and through group research projects, in addition to in-class exercises such as debates. Writing and research skills were developed through student groups designing, carrying out and reporting on their own semester-long research projects around the lasting effects of the historical Ruston Smelter on the biology and water systems of Tacoma. The writing of their mini grant proposals and final project reports was carried out in stages to allow for feedback before the deadline. Speakers from industry were invited to share their specialist knowledge as guest lecturers, and students were encouraged to interact with them, with a view to employment opportunities. Formative assessment techniques included jigsaw exercises, gallery walks, placemat surveys, think pair share and take-home point summaries. Summative assessment included discussion leadership, exams, homeworks, group projects, in-class exercises, field trips, and pre-discussion reading exercises.An interdisciplinary active learning course was introduced at the University of Puget Sound entitled 'Mineral Resources and the Environment'. Various formative assessment and active learning techniques that have been effective in other courses were adapted and implemented to improve student learning, increase retention and broaden knowledge and understanding of course material. This was an elective course targeted towards upper-level undergraduate geology and environmental majors. The course provided an introduction to the mineral resources industry, discussing geological, environmental, societal and economic aspects, legislation and the processes involved in exploration, extraction, processing, reclamation/remediation and recycling of products. Lectures and associated weekly labs were linked in subject matter; relevant readings from the recent scientific literature were assigned and discussed in the second lecture of the week. Peer-based learning was facilitated through weekly reading assignments with peer-led discussions and through group research projects, in addition to in-class exercises such as debates. Writing and research skills were developed through student groups designing, carrying out and reporting on their own semester-long research projects around the lasting effects of the historical Ruston Smelter on the biology and water systems of Tacoma. The writing of their mini grant proposals and final project reports was carried out in stages to allow for feedback before the deadline. Speakers from industry were invited to share their specialist knowledge as guest lecturers, and students were encouraged to interact with them, with a view to employment opportunities. Formative assessment techniques included jigsaw exercises, gallery walks, placemat surveys, think pair share and take-home point summaries. Summative assessment included discussion leadership, exams, homeworks, group projects, in-class exercises, field trips, and pre-discussion reading exercises.

Well-construction and hydrogeologic data for observation wells in the vicinity of a low-level radioactive-waste disposal site near Sheffield, Illinois

USGS Publications Warehouse

Mansue, Lawrence J.; Mills, Patrick C.

1991-01-01

The U.S. Geological Survey conducted hydrogeologic studies at the low-level radioactive-waste disposal site near Sheffield, Illinois, from 1976 through 1987. During that period, 108 observation wells were installed in the vicinity of the disposal site in glacial and post-glacial deposits of Quaternary age and bedrock of Pennsylvanian age. Data in this report include the location of each well, the date each well was drilled, the geologic units penetrated by each well, the physical measurements of each well, the elevations of the top (measuring point) of each well and geologic-unit contacts at each well, and the highest and lowest recorded water levels in each well.

Mississippi River delta plain, Louisiana coast, and inner shelf Holocene geologic framework, processes, and resources

USGS Publications Warehouse

Williams, S. Jeffress; Kulp, Mark; Penland, Shea; Kindinger, Jack L.; Flocks, James G.; Buster, Noreen A.; Holmes, Charles W.

2009-01-01

Extending nearly 400 km from Sabine Pass on the Texas-Louisiana border east to the Chandeleur Islands, the Louisiana coastal zone (Fig. 11.1) along the north-central Gulf of Mexico is the southern terminus of the largest drainage basin in North America (>3.3 million km2), which includes the Mississippi River delta plain where approximately 6.2 million kilograms per year of sediment is delivered to the Gulf of Mexico (Coleman 1988). The Mississippi River, active since at least Late Jurassic time (Mann and Thomas 1968), is the main distributary channel of this drainage system and during the Holocene has constructed one of the largest delta plains in the world, larger than 30,000 km2 (Coleman and Prior 1980; Coleman 1981; Coleman et al. 1998). The subsurface geology and geomorphology of the Louisiana coastal zone reffects a complex history of regional tectonic events and fluvial, deltaic, and marine sedimentary processes affected by large sea-level fluctuations. Despite the complex geology of the north-central Gulf basin, a long history of engineering studies and Scientific research investigations (see table 11.1) has led to substantial knowledge of the geologic framework and evolution of the delta plain region (see also Bird et al., chapter 1 in this volume). Mississippi River delta plain, Louisiana coast, and inner shelf Holocene geologic framework, processes, and resources. Available from: https://www.researchgate.net/publication/262802561_Mississippi_River_delta_plain_Louisiana_coast_and_inner_shelf_Holocene_geologic_framework_processes_and_resources [accessed Sep 13, 2017].

Impact, and its implications for geology

NASA Technical Reports Server (NTRS)

Marvin, Ursula B.

1988-01-01

The publication of seminal texts on geology and on meteoritics in the 1790s, laid the groundwork for the emergence of each discipline as a modern branch of science. Within the past three decades, impact cratering has become universally accepted as a process that sculptures the surfaces of planets and satellites throughout the solar system. Nevertheless, one finds in-depth discussions of impact processes mainly in books on the Moon or in surveys of the Solar System. The historical source of the separation between meteoritics and geology is easy to identify. It began with Hutton. Meteorite impact is an extraordinary event acting instantaneously from outside the Earth. It violates Hutton's principles, which were enlarged upon and firmly established as fundamental to the geological sciences by Lyell. The split between meteoritics and geology surely would have healed as early as 1892 if the investigations conducted by Gilbert (1843-1918) at the crater in northern Arizona had yielded convincing evidence of meteorite impact. The 1950s and 1960s saw a burgeoning of interest in impact processes. The same period witnessed the so-called revolution in the Earth Sciences, when geologists yielded up the idea of fixed continents and began to view the Earth's lithosphere as a dynamic array of horizontally moving plates. Plate tectonics, however, is fully consistent with the geological concepts inherited from Hutton: the plates slowly split, slide, and suture, driven by forces intrinsic to the globe.

The STRATAFORM Project: U.S. Geological Survey geotechnical studies

USGS Publications Warehouse

Minasian, Diane L.; Lee, Homa J.; Locat, Jaques; Orzech, Kevin M.; Martz, Gregory R.; Israel, Kenneth

2001-01-01

This report presents physical property logs of core samples from an offshore area near Eureka, CA. The cores were obtained as part of the STRATAFORM Program (Nittrouer and Kravitz, 1995, 1996), a study investigating how present sedimentation and sediment transport processes influence long-term stratigraphic sequences preserved in the geologic record. The core samples were collected during four separate research cruises to the northern California study area, and data shown in the logs of the cores were collected using a multi-sensor whole core logger. The physical properties collected are useful in identifying stratigraphic units, ground-truthing acoustic imagery and sub-bottom profiles, and in understanding mass movement processes. STRATA FORmation on Margins was initiated in 1994 by the Office of Naval Research, Marine Geology and Geophysics Department as a coordinated multi-investigator study of continental-margin sediment transport processes and stratigraphy (Nittrouer and Kravitz, 1996). The program is investigating the stratigraphic signature of the shelf and slope parts of the continental margins, and is designed to provide a better understanding of the sedimentary record and a better prediction of strata. Specifically, the goals of the STRATAFORM Program are to (Nittrouer and Kravitz, 1995): - determine the geological relevance of short-term physical processes that erode, transport, and deposit particles and those processes that subsequently rework the seabed over time scales - improve capabilities for identifying the processes that form the strata observed within the upper ~100 m of the seabed commonly representing 104-106 years of sedimentation. - synthesize this knowledge and bridge the gap between time scales of sedimentary processes and those of sequence stratigraphy. The STRATAFORM Program is divided into studies of the continental shelf and the continental slope; the geotechnical group within the U.S. Geological Survey provides support to both parts of the project.

USGS Western Coastal and Marine Geology Team

USGS Publications Warehouse

Johnson, Sam; Gibbons, Helen

2007-01-01

The Western Coastal and Marine Geology Team of the U.S. Geological Survey (USGS) studies the coasts of the western United States, including Alaska and Hawai‘i. Team scientists conduct research, monitor processes, and develop information about coastal and marine geologic hazards, environmental conditions, habitats, and energy and mineral resources. This information helps managers at all levels of government and in the private sector make informed decisions about the use and protection of national coastal and marine resources.

Distribution and interplay of geologic processes on Titan from Cassini radar data

USGS Publications Warehouse

Lopes, R.M.C.; Stofan, E.R.; Peckyno, R.; Radebaugh, J.; Mitchell, K.L.; Mitri, Giuseppe; Wood, C.A.; Kirk, R.L.; Wall, S.D.; Lunine, J.I.; Hayes, A.; Lorenz, R.; Farr, Tom; Wye, L.; Craig, J.; Ollerenshaw, R.J.; Janssen, M.; LeGall, A.; Paganelli, F.; West, R.; Stiles, B.; Callahan, P.; Anderson, Y.; Valora, P.; Soderblom, L.

2010-01-01

The Cassini Titan Radar Mapper is providing an unprecedented view of Titan's surface geology. Here we use Synthetic Aperture Radar (SAR) image swaths (Ta-T30) obtained from October 2004 to December 2007 to infer the geologic processes that have shaped Titan's surface. These SAR swaths cover about 20% of the surface, at a spatial resolution ranging from ???350 m to ???2 km. The SAR data are distributed over a wide latitudinal and longitudinal range, enabling some conclusions to be drawn about the global distribution of processes. They reveal a geologically complex surface that has been modified by all the major geologic processes seen on Earth - volcanism, tectonism, impact cratering, and erosion and deposition by fluvial and aeolian activity. In this paper, we map geomorphological units from SAR data and analyze their areal distribution and relative ages of modification in order to infer the geologic evolution of Titan's surface. We find that dunes and hummocky and mountainous terrains are more widespread than lakes, putative cryovolcanic features, mottled plains, and craters and crateriform structures that may be due to impact. Undifferentiated plains are the largest areal unit; their origin is uncertain. In terms of latitudinal distribution, dunes and hummocky and mountainous terrains are located mostly at low latitudes (less than 30??), with no dunes being present above 60??. Channels formed by fluvial activity are present at all latitudes, but lakes are at high latitudes only. Crateriform structures that may have been formed by impact appear to be uniformly distributed with latitude, but the well-preserved impact craters are all located at low latitudes, possibly indicating that more resurfacing has occurred at higher latitudes. Cryovolcanic features are not ubiquitous, and are mostly located between 30?? and 60?? north. We examine temporal relationships between units wherever possible, and conclude that aeolian and fluvial/pluvial/lacustrine processes are the most recent, while tectonic processes that led to the formation of mountains and Xanadu are likely the most ancient. ?? 2009 Elsevier Inc.

Disribution and interplay of geologic processes on Titan from Cassini radar data

USGS Publications Warehouse

Lopes, R.M.C.; Stofan, E.R.; Peckyno, R.; Radebaugh, J.; Mitchell, K.L.; Mitri, Giuseppe; Wood, C.A.; Kirk, R.L.; Wall, S.D.; Lunine, J.I.; Hayes, A.; Lorenz, R.; Farr, Tom; Wye, L.; Craig, J.; Ollerenshaw, R.J.; Janssen, M.; LeGall, A.; Paganelli, F.; West, R.; Stiles, B.; Callahan, P.; Anderson, Y.; Valora, P.; Soderblom, L.

2010-01-01

The Cassini Titan Radar Mapper is providing an unprecedented view of Titan's surface geology. Here we use Synthetic Aperture Radar (SAR) image swaths (Ta-T30) obtained from October 2004 to December 2007 to infer the geologic processes that have shaped Titan's surface. These SAR swaths cover about 20% of the surface, at a spatial resolution ranging from ~350 m to ~2 km. The SAR data are distributed over a wide latitudinal and longitudinal range, enabling some conclusions to be drawn about the global distribution of processes. They reveal a geologically complex surface that has been modified by all the major geologic processes seen on Earth - volcanism, tectonism, impact cratering, and erosion and deposition by fluvial and aeolian activity. In this paper, we map geomorphological units from SAR data and analyze their areal distribution and relative ages of modification in order to infer the geologic evolution of Titan's surface. We find that dunes and hummocky and mountainous terrains are more widespread than lakes, putative cryovolcanic features, mottled plains, and craters and crateriform structures that may be due to impact. Undifferentiated plains are the largest areal unit; their origin is uncertain. In terms of latitudinal distribution, dunes and hummocky and mountainous terrains are located mostly at low latitudes (less than 30 degrees), with no dunes being present above 60 degrees. Channels formed by fluvial activity are present at all latitudes, but lakes are at high latitudes only. Crateriform structures that may have been formed by impact appear to be uniformly distributed with latitude, but the well-preserved impact craters are all located at low latitudes, possibly indicating that more resurfacing has occurred at higher latitudes. Cryovolcanic features are not ubiquitous, and are mostly located between 30 degrees and 60 degrees north. We examine temporal relationships between units wherever possible, and conclude that aeolian and fluvial/pluvial/lacustrine processes are the most recent, while tectonic processes that led to the formation of mountains and Xanadu are likely the most ancient.

Conduct of Geologic Field Work During Planetary Exploration: Why Geology Matters

NASA Technical Reports Server (NTRS)

Eppler, Dean B.

2010-01-01

The science of field geology is the investigative process of determining the distribution of rock units and structures on a planet fs surface, and it is the first-order data set that informs all subsequent studies of a planet, such as geochemistry, geochronology, geophysics, or remote sensing. For future missions to the Moon and Mars, the surface systems deployed must support the conduct of field geology if these endeavors are to be scientifically useful. This lecture discussed what field geology is all about.why it is important, how it is done, how conducting field geology informs many other sciences, and how it affects the design of surface systems and the implementation of operations in the future.

Mapping spatial variation in rock properties in relationship to scale-dependent structure using spectral curvature

NASA Astrophysics Data System (ADS)

Stewart, S. A.; Wynn, T. J.

2000-08-01

Maps of the three-dimensional geometry of geologic surfaces show that structural curvature commonly varies with scale of observation: This fact can be viewed as superposition of structures at different wavelengths. Rock properties such as fracture density and orientation reflect the contribution of superimposed structures. For this reason, characterization of geologic surfaces is fundamentally different from purely geometrical characterization, for which local description of surface properties is sufficient. We show that measured curvature decays according to a power law with increasing size of measurement window, so short-wavelength curvatures do not obscure long-wavelength curvatures in the same data set. This property can be taken advantage of in a simple technique for automatically mapping multiwavelength curvatures. At each point on a surface, curvature is measured at a range of wavelengths. This curvature spectrum can be analyzed in map view or collapsed into a single value at each point in space. The results indicate that complex geologic surfaces can be characterized without any prior knowledge of structural wavelengths and orientation. The method should prove useful in applications requiring knowledge of spatial variation in rock properties from remotely sensed data, such as exploration for hydrocarbon reservoirs or nuclear waste repositories.

A bibliography of planetary geology principal investigators and their associates, 1981 - 1982

NASA Technical Reports Server (NTRS)

Plescia, J. B. (Compiler)

1982-01-01

Over 800 publications submitted by researchers supported through NASA's Planetary Geology Program are cited and an author/editor index is provided. Entries are listed under the following subjects: (1) general interest topics; (2) solar system, comets, asteroids, and small bodies; (3) geologic mapping, geomorphology, and stratigraphy; (4) structure, tectonics, geologic and geophysical evolution; (5) impact craters: morphology, density, and geologic studies; (6) volcanism; (7) fluvial, mass wasting, and periglacial processes; (8) Eolian studies; (9) regolith, volatile, atmosphere, and climate; (10) remote sensing, radar, and photometry; and (11) cartography, photogrammetry, geodesy, and altimetry.

Blue Marble Matches: Using Earth for Planetary Comparisons

NASA Technical Reports Server (NTRS)

Graff, Paige Valderrama

2009-01-01

Goal: This activity is designed to introduce students to geologic processes on Earth and model how scientists use Earth to gain a better understanding of other planetary bodies in the solar system. Objectives: Students will: 1. Identify common descriptor characteristics used by scientists to describe geologic features in images. 2. Identify geologic features and how they form on Earth. 3. Create a list of defining/distinguishing characteristics of geologic features 4. Identify geologic features in images of other planetary bodies. 5. List observations and interpretations about planetary body comparisons. 6. Create summary statements about planetary body comparisons.

The conodont Iapetognathus and its value for defining the base of the Ordovician System

USGS Publications Warehouse

Miller, J. E.; Repetski, John E.; Nicoll, R. S.; Nowlan, G. S.; Ethington, R. L.

2014-01-01

Nicoll et al. (1999, Brigham Young University Geology Studies 44, 27–101) published the taxonomy of species of the ramiform conodont Iapetognathus Landing in Fortey et al. (1982, The Cambrian–Ordovician boundary: sections, fossil distributions, and correlations, National Museum of Wales, Geological Series No. 3, Cardiff, 95–129) and its ancestorIapetonudus Nicoll et al., 1999. Cooper et al. (2001, Episodes 24, 19–28) used the First Appearance Datum of Iapetognathus fluctivagus Nicoll et al., 1999 to mark the base of the Ordovician System at Green Point, Newfoundland. Terfelt et al. (2012, Lethaia 45, 227–237) re-evaluated Iapetognathus at Green Point and made several taxonomic and stratigraphic conclusions, nearly all of which we refute herein.

Semi-Infinite Geology Modeling Algorithm (SIGMA): a Modular Approach to 3D Gravity

NASA Astrophysics Data System (ADS)

Chang, J. C.; Crain, K.

2015-12-01

Conventional 3D gravity computations can take up to days, weeks, and even months, depending on the size and resolution of the data being modeled. Additional modeling runs, due to technical malfunctions or additional data modifications, only compound computation times even further. We propose a new modeling algorithm that utilizes vertical line elements to approximate mass, and non-gridded (point) gravity observations. This algorithm is (1) magnitudes faster than conventional methods, (2) accurate to less than 0.1% error, and (3) modular. The modularity of this methodology means that researchers can modify their geology/terrain or gravity data, and only the modified component needs to be re-run. Additionally, land-, sea-, and air-based platforms can be modeled at their observation point, without having to filter data into a synthesized grid.

Geology and religion in Portugal

PubMed Central

Carneiro, Ana; Simoes, Ana; Diogo, Maria Paula; Mota, Teresa Salomé

2013-01-01

This paper addresses the relationship between geology and religion in Portugal by focusing on three case studies of naturalists who produced original research and lived in different historical periods, from the eighteenth to the twentieth century. Whereas in non-peripheral European countries religious themes and even controversies between science and religion were dealt with by scientists and discussed in scientific communities, in Portugal the absence of a debate between science and religion within scientific and intellectual circles is particularly striking. From the historiographic point of view, in a country such as Portugal, where Roman Catholicism is part of the religious and cultural tradition, the influence of religion in all aspects of life has been either taken for granted by those less familiar with the national context or dismissed by local intellectuals, who do not see it as relevant to science. The situation is more complex than these dichotomies, rendering the study of this question particularly appealing from the historiographic point of view, geology being by its very nature a well-suited point from which to approach the theme. We argue that there is a long tradition of independence between science and religion, agnosticism and even atheism among local elites. Especially from the eighteenth century onwards, they are usually portrayed as enlightened minds who struggled against religious and political obscurantism. Religion—or, to be more precise, the Roman Catholic Church and its institutions—was usually identified with backwardness, whereas science was seen as the path to progress; consequently men of science usually dissociated their scientific production from religious belief.

Microtremor Survey On PovoaÇA~o County (s. Miguel Island, Azores): Data Analysis And Interpretation

NASA Astrophysics Data System (ADS)

Teves-Costa, P.; Riedel, C.; Vales, D.; Wallenstein, N.; Borges, A.; Senos, M. L.; Gaspar, J. L.; Queiroz, G.

The seismic activity of the Azores Islands is known since the beginning of their settlement in the middle of the XV century. About 30 earthquakes produced social and economical important damages. The analysis of the damage distribution, for several earthquakes, shows systematically the existence of site effects. In order to understand the initial cause of these effects, three different zones were selected, with different geological and geomorphological characteristics, in the Povoação County, to perform a microtremor survey. Seismic data were recorded on a grid of 50 m in the three regions, using a 3-component Lennartz 1 Hz seismometer, with a sampling rate of 8 ms. The stations were deployed for 5 minutes or more to record microtremor imposed on the topmost layers by natural and anthropogenic sources. The data were processed using two different subroutine packages, in order to estimate the H/V ratio, defined according to the Nakamura methodology. However, the two processing routines gave different results, which forced us to revise all the procedures and to identify the main factors that caused it. Three portable seismic stations were installed in three fixed points, for about three months, aiming to record some earthquakes. Several small magnitude earthquakes (m < 3.0) were recorded and these data were processed in the same way as the noise data, obtaining reference H/V ratios. The interpretation of the dominant frequencies, for noise and small magnitude earthquakes, was performed taking into consideration not only the geological characteristics, but also the structural geomorphology.

The application of the pilot points in groundwater numerical inversion model

NASA Astrophysics Data System (ADS)

Hu, Bin; Teng, Yanguo; Cheng, Lirong

2015-04-01

Numerical inversion simulation of groundwater has been widely applied in groundwater. Compared to traditional forward modeling, inversion model has more space to study. Zones and inversing modeling cell by cell are conventional methods. Pilot points is a method between them. The traditional inverse modeling method often uses software dividing the model into several zones with a few parameters needed to be inversed. However, distribution is usually too simple for modeler and result of simulation deviation. Inverse cell by cell will get the most actual parameter distribution in theory, but it need computational complexity greatly and quantity of survey data for geological statistical simulation areas. Compared to those methods, pilot points distribute a set of points throughout the different model domains for parameter estimation. Property values are assigned to model cells by Kriging to ensure geological units within the parameters of heterogeneity. It will reduce requirements of simulation area geological statistics and offset the gap between above methods. Pilot points can not only save calculation time, increase fitting degree, but also reduce instability of numerical model caused by numbers of parameters and other advantages. In this paper, we use pilot point in a field which structure formation heterogeneity and hydraulics parameter was unknown. We compare inversion modeling results of zones and pilot point methods. With the method of comparative analysis, we explore the characteristic of pilot point in groundwater inversion model. First, modeler generates an initial spatially correlated field given a geostatistical model by the description of the case site with the software named Groundwater Vistas 6. Defining Kriging to obtain the value of the field functions over the model domain on the basis of their values at measurement and pilot point locations (hydraulic conductivity), then we assign pilot points to the interpolated field which have been divided into 4 zones. And add range of disturbance values to inversion targets to calculate the value of hydraulic conductivity. Third, after inversion calculation (PEST), the interpolated field will minimize an objective function measuring the misfit between calculated and measured data. It's an optimization problem to find the optimum value of parameters. After the inversion modeling, the following major conclusion can be found out: (1) In a field structure formation is heterogeneity, the results of pilot point method is more real: better fitting result of parameters, more stable calculation of numerical simulation (stable residual distribution). Compared to zones, it is better of reflecting the heterogeneity of study field. (2) Pilot point method ensures that each parameter is sensitive and not entirely dependent on other parameters. Thus it guarantees the relative independence and authenticity of parameters evaluation results. However, it costs more time to calculate than zones. Key words: groundwater; pilot point; inverse model; heterogeneity; hydraulic conductivity

Spatial land-use inventory, modeling, and projection/Denver metropolitan area, with inputs from existing maps, airphotos, and LANDSAT imagery

NASA Technical Reports Server (NTRS)

Tom, C.; Miller, L. D.; Christenson, J. W.

1978-01-01

A landscape model was constructed with 34 land-use, physiographic, socioeconomic, and transportation maps. A simple Markov land-use trend model was constructed from observed rates of change and nonchange from photointerpreted 1963 and 1970 airphotos. Seven multivariate land-use projection models predicting 1970 spatial land-use changes achieved accuracies from 42 to 57 percent. A final modeling strategy was designed, which combines both Markov trend and multivariate spatial projection processes. Landsat-1 image preprocessing included geometric rectification/resampling, spectral-band, and band/insolation ratioing operations. A new, systematic grid-sampled point training-set approach proved to be useful when tested on the four orginal MSS bands, ten image bands and ratios, and all 48 image and map variables (less land use). Ten variable accuracy was raised over 15 percentage points from 38.4 to 53.9 percent, with the use of the 31 ancillary variables. A land-use classification map was produced with an optimal ten-channel subset of four image bands and six ancillary map variables. Point-by-point verification of 331,776 points against a 1972/1973 U.S. Geological Survey (UGSG) land-use map prepared with airphotos and the same classification scheme showed average first-, second-, and third-order accuracies of 76.3, 58.4, and 33.0 percent, respectively.

Geology of the Woods Hole area, Massachusetts; the story behind the landscape

USGS Publications Warehouse

Hutchinson, D.R.; Schwarzman, Beth

2001-01-01

The geologic story of the Woods Hole area, Cape Cod, Mass., was written by glacial ice during the last ice age and edited by the ocean waves. If you learn to read today's landscape, you can see the fascinating history it records. The features of Cape Cod, from the ponds and cranberry bogs to the gently sloping sandy uplands and rocky, irregular hills to the beaches, result from the glacial processes that built the cape and the marine processes that still shape it. Many geologists since the late 19th century have contributed to telling this story. The U.S. Geological Survey has studied the geology of Cape Cod in order to provide people with objective scientific data that can be applied to wise stewardship of the land and coasts.

Proceedings of the Seventh International Conference on Mars

NASA Technical Reports Server (NTRS)

2007-01-01

The oral and poster sessions of the SEVENTH INTERNATIONAL CONFERENCE ON MARS included; The Distribution and Context of Water-related Minerals on Mars; Poster Session: Mars Geology; Geology of the Martian Surface: Lithologic Variation, Composition, and Structure; Water Through Mars' Geologic History; Poster Session: Mars Water and the Martian Interior; Volatiles and Interior Evolution; The Martian Climate and Atmosphere: Variations in Time and Space; Poster Session: The Martian Climate and Current Processes; Modern Mars: Weather, Atmospheric Chemistry, Geologic Processes, and Water Cycle; Public Lecture: Mars Reconnaissance Orbiter's New View of the Red Planet; The North and South Polar Layered Deposits, Circumpolar Regions, and Changes with Time; Poster Session: Mars Polar Science, Astrobiology, Future Missions/Instruments, and Other Mars Science; Mars Astrobiology and Upcoming Missions; and Martian Stratigraphy and Sedimentology: Reading the Sedimentary Record.

Waiting for O2

NASA Astrophysics Data System (ADS)

Zahnle, K. J.; Catling, D. C.; Claire, M.

2011-12-01

Oxygenic photosynthesis appears to be a necessary condition for the creation of an oxygen-rich atmosphere like Earth's. But available geological and geochemical evidence suggests that oxygenic photosynthesis appeared hundreds of millions of years before the oxygen-rich atmosphere was fully established. The interregnum implies that at least one other necessary condition for O2 had to be met. Here we argue that the second condition was the irreversible oxidation of the surface and crust by hydrogen escape. This is the same cause as it is for other planets with oxidized surfaces, such as Mars. The link between hydrogen escape and oxygen is direct because the primary process in oxygenic photosynthesis is splitting H2O into hydrogen and O2. Gradual oxidation of the surface and crust eventually brought Earth to a tipping point where free O2 became more stable than competing reduced gases such as CH4; or put another way, the system evolved to the point where surface oxidation under a reducing atmosphere could not keep pace with hydrogen escape. Because hydrogen escape is no faster than other geological processes that govern the long-term redox budget of the atmosphere, the approach to oxygen's final triumph would have been fitful and punctuated by episodes of oxygenation, as the record suggests was the case. The duration of the interregnum was determined by the rate of hydrogen escape and by the size of the reduced reservoir that needed to be oxidized before O2 became favored. If hydrogen escape was responsible for O2, it may be possible to account for the rough constancy of del 13C as a rough constancy of the H2/CO2 ratio in volcanic gases that follows from the constancy of the mantle's oxygen fugacity and a rough constancy in the H2O/CO2 ratio in subducted materials.

The search for an identification of amino acids, nucleobases and nucleosides in samples returned from Mars

NASA Technical Reports Server (NTRS)

Gehrke, Charles W.; Ponnamperuma, Cyril; Kuo, Kenneth C.; Stalling, David L.; Zumwalt, Robert W.

1988-01-01

The Mars Sample Return mission will provide us with a unique source of material from our solar system; material which could advance our knowledge of the processes of chemical evolution. As has been pointed out, Mars geological investigations based on the Viking datasets have shown that primordial Mars was in many biologically important ways similar to the primordial Earth; the presence of surface liquid water, moderate surface temperatures, and atmosphere of carbon dioxide and nitrogen, and high geothermal heat flow. Indeed, it would seem that conditions on Earth and Mars were fundamentally similar during the first one billion years or so. As has been pointed out, Mars may well contain the best preserved record of the events that transpired on the early planets. Examination of that early record will involve searching for many things, from microfossils to isotopic abundance data. We propose an investigation of the returned Mars samples for biologically important organic compounds, with emphases on amino acids, the purine and pyrimidine bases, and nucleosides.

Using Google Earth and Satellite Imagery to Foster Place-Based Teaching in an Introductory Physical Geology Course

ERIC Educational Resources Information Center

Monet, Julie; Greene, Todd

2012-01-01

Students in an introductory physical geology course often have difficulty making connections between basic course topics and assembling key concepts (beyond textbook examples) to interpret how geologic processes shape the characteristics of the local and regional natural environment. As an approach to address these issues, we designed and…

Overview of geology, hydrology, geomorphology, and sediment budget of the Deschutes River Basin, Oregon.

Treesearch

Jim E. O' Connor; Gordon E. Grant; Tana L. Haluska

2003-01-01

Within the Deschutes River basin of central Oregon, the geology, hydrology, and physiography influence geomorphic and ecologic processes at a variety of temporal and spatial scales. Hydrologic and physiographic characteristics of the basin are related to underlying geologic materials. In the southwestern part of the basin, Quaternary volcanism and tectonism has created...

Geology Is. Preliminary Edition. Volumes I and II, Including Activity Sheets.

ERIC Educational Resources Information Center

O'Fallon Township High School District #203, IL.

Presented in this document is a full-year, two-semester course in geology for high school students. Composed of 5 units and 20 chapters, the course emphasizes the practical aspects of geology with special attention to the relationship between geoscience processes and the environment and to the application of scientific and technical expertise to…

Global geological mapping of Ganymede

NASA Astrophysics Data System (ADS)

Patterson, G. Wesley; Collins, Geoffrey C.; Head, James W.; Pappalardo, Robert T.; Prockter, Louise M.; Lucchitta, Baerbel K.; Kay, Jonathan P.

2010-06-01

We have compiled a global geological map of Ganymede that represents the most recent understanding of the satellite based on Galileo mission results. This contribution builds on important previous accomplishments in the study of Ganymede utilizing Voyager data and incorporates the many new discoveries that were brought about by examination of Galileo data. We discuss the material properties of geological units defined utilizing a global mosaic of the surface with a nominal resolution of 1 km/pixel assembled by the USGS with the best available Voyager and Galileo regional coverage and high resolution imagery (100-200 m/pixel) of characteristic features and terrain types obtained by the Galileo spacecraft. We also use crater density measurements obtained from our mapping efforts to examine age relationships amongst the various defined units. These efforts have resulted in a more complete understanding of the major geological processes operating on Ganymede, especially the roles of cryovolcanic and tectonic processes in the formation of might materials. They have also clarified the characteristics of the geological units that comprise the satellite's surface, the stratigraphic relationships of those geological units and structures, and the geological history inferred from those relationships. For instance, the characteristics and stratigraphic relationships of dark lineated material and reticulate material suggest they represent an intermediate stage between dark cratered material and light material units.

Directions of the US Geological Survey Landslide Hazards Reduction Program

USGS Publications Warehouse

Wieczorek, G.F.

1993-01-01

The US Geological Survey (USGS) Landslide Hazards Reduction Program includes studies of landslide process and prediction, landslide susceptibility and risk mapping, landslide recurrence and slope evolution, and research application and technology transfer. Studies of landslide processes have been recently conducted in Virginia, Utah, California, Alaska, and Hawaii, Landslide susceptibility maps provide a very important tool for landslide hazard reduction. The effects of engineering-geologic characteristics of rocks, seismic activity, short and long-term climatic change on landslide recurrence are under study. Detailed measurement of movement and deformation has begun on some active landslides. -from Author

Geologic controls of erosion and sedimentation on Mars

NASA Technical Reports Server (NTRS)

Tanaka, K. L.; Dohm, J. M.; Carr, M. H.

1993-01-01

Because Mars has had a history of diverse erosional and depositional styles, a variety of erosional landforms and sedimentary deposits can be seen on Viking orbiter images. Here we review how geologic processes involving rock, water, and structure have controlled erosion and sedimentation on Mars. Additionally, we review how further studies will help refine our understanding of these processes.

Time-Lapse Motion Picture Technique Applied to the Study of Geological Processes.

PubMed

Miller, R D; Crandell, D R

1959-09-25

Light-weight, battery-operated timers were built and coupled to 16-mm motion-picture cameras having apertures controlled by photoelectric cells. The cameras were placed adjacent to Emmons Glacier on Mount Rainier. The film obtained confirms the view that exterior time-lapse photography can be applied to the study of slow-acting geologic processes.

Lakes, Seas, Mountains and Volcanoes on Titan: Implications for Geologic History

NASA Astrophysics Data System (ADS)

Stofan, E.; Hayes, A. G.; Wall, S. W.; Wood, C. A.

2013-09-01

The surface of Titan exhibits abundant evidence for erosional and depositional processes, with bodies of liquid hydrocarbons at both poles. While the portion of Titan's geologic history that we can access through its current surface is dominated by exogenic processes, remnant mountains and a few cryovolcanic features hint at a more endogenic past.

Computer Programs for Obtaining and Analyzing Daily Mean Steamflow Data from the U.S. Geological Survey National Water Information System Web Site

USGS Publications Warehouse

Granato, Gregory E.

2009-01-01

Streamflow information is important for many planning and design activities including water-supply analysis, habitat protection, bridge and culvert design, calibration of surface and ground-water models, and water-quality assessments. Streamflow information is especially critical for water-quality assessments (Warn and Brew, 1980; Di Toro, 1984; Driscoll and others, 1989; Driscoll and others, 1990, a,b). Calculation of streamflow statistics for receiving waters is necessary to estimate the potential effects of point sources such as wastewater-treatment plants and nonpoint sources such as highway and urban-runoff discharges on receiving water. Streamflow statistics indicate the amount of flow that may be available for dilution and transport of contaminants (U.S. Environmental Protection Agency, 1986; Driscoll and others, 1990, a,b). Streamflow statistics also may be used to indicate receiving-water quality because concentrations of water-quality constituents commonly vary naturally with streamflow. For example, concentrations of suspended sediment and sediment-associated constituents (such as nutrients, trace elements, and many organic compounds) commonly increase with increasing flows, and concentrations of many dissolved constituents commonly decrease with increasing flows in streams and rivers (O'Connor, 1976; Glysson, 1987; Vogel and others, 2003, 2005). Reliable, efficient and repeatable methods are needed to access and process streamflow information and data. For example, the Nation's highway infrastructure includes an innumerable number of stream crossings and stormwater-outfall points for which estimates of stream-discharge statistics may be needed. The U.S. Geological Survey (USGS) streamflow data-collection program is designed to provide streamflow data at gaged sites and to provide information that can be used to estimate streamflows at almost any point along any stream in the United States (Benson and Carter, 1973; Wahl and others, 1995; National Research Council, 2004). The USGS maintains the National Water Information System (NWIS), a distributed network of computers and file servers used to store and retrieve hydrologic data (Mathey, 1998; U.S. Geological Survey, 2008). NWISWeb is an online version of this database that includes water data from more than 24,000 streamflow-gaging stations throughout the United States (U.S. Geological Survey, 2002, 2008). Information from NWISWeb is commonly used to characterize streamflows at gaged sites and to help predict streamflows at ungaged sites. Five computer programs were developed for obtaining and analyzing streamflow from the National Water Information System (NWISWeb). The programs were developed as part of a study by the U.S. Geological Survey, in cooperation with the Federal Highway Administration, to develop a stochastic empirical loading and dilution model. The programs were developed because reliable, efficient, and repeatable methods are needed to access and process streamflow information and data. The first program is designed to facilitate the downloading and reformatting of NWISWeb streamflow data. The second program is designed to facilitate graphical analysis of streamflow data. The third program is designed to facilitate streamflow-record extension and augmentation to help develop long-term statistical estimates for sites with limited data. The fourth program is designed to facilitate statistical analysis of streamflow data. The fifth program is a preprocessor to create batch input files for the U.S. Environmental Protection Agency DFLOW3 program for calculating low-flow statistics. These computer programs were developed to facilitate the analysis of daily mean streamflow data for planning-level water-quality analyses but also are useful for many other applications pertaining to streamflow data and statistics. These programs and the associated documentation are included on the CD-ROM accompanying this report. This report and the appendixes on the

Application of MAGSAT to Lithospheric Modeling in South America. Part 2: Synthesis of Geologic and Seismic Data for Development of Integrated Crustal Models

NASA Technical Reports Server (NTRS)

Keller, G. R.; Lidiak, E. G.; Hinze, W. J.; Braile, L. W.; Vonfrese, R. R. B. (Principal Investigator)

1984-01-01

Research activities performed on MAGSAT scalar data over South America, Central America, and the adjacent marine areas are summarized. The geologic utility of magnetic anomalies detected by satellite is demonstrated by focusing on the spherical-Earth interpretation of scalar MAGSAT data in combination with ancillary geological and geophysical data to obtain lithospheric models for these regions related to their contemporary crustal dynamics processes, geologic history, current volcanism seismicity and natural resources.

Channel characterization using multiple-point geostatistics, neural network, and modern analogy: A case study from a carbonate reservoir, southwest Iran

NASA Astrophysics Data System (ADS)

Hashemi, Seyyedhossein; Javaherian, Abdolrahim; Ataee-pour, Majid; Tahmasebi, Pejman; Khoshdel, Hossein

2014-12-01

In facies modeling, the ideal objective is to integrate different sources of data to generate a model that has the highest consistency to reality with respect to geological shapes and their facies architectures. Multiple-point (geo)statistics (MPS) is a tool that gives the opportunity of reaching this goal via defining a training image (TI). A facies modeling workflow was conducted on a carbonate reservoir located southwest Iran. Through a sequence stratigraphic correlation among the wells, it was revealed that the interval under a modeling process was deposited in a tidal flat environment. Bahamas tidal flat environment which is one of the most well studied modern carbonate tidal flats was considered to be the source of required information for modeling a TI. In parallel, a neural network probability cube was generated based on a set of attributes derived from 3D seismic cube to be applied into the MPS algorithm as a soft conditioning data. Moreover, extracted channel bodies and drilled well log facies came to the modeling as hard data. Combination of these constraints resulted to a facies model which was greatly consistent to the geological scenarios. This study showed how analogy of modern occurrences can be set as the foundation for generating a training image. Channel morphology and facies types currently being deposited, which are crucial for modeling a training image, was inferred from modern occurrences. However, there were some practical considerations concerning the MPS algorithm used for facies simulation. The main limitation was the huge amount of RAM and CPU-time needed to perform simulations.

Sea-floor geology of Long Island Sound north of Duck Pond Point, New York

USGS Publications Warehouse

McMullen, K.Y.; Poppe, L.J.; Danforth, W.W.; Blackwood, D.S.; Schaer, J.D.; Glomb, K.A.; Doran, E.F.

2012-01-01

The U.S. Geological Survey, the National Oceanic and Atmospheric Administration (NOAA), and the Connecticut Department of Environmental Protection are mapping the sea floor in coastal areas of the northeastern United States. As part of the project, more than 100 square kilometers of multibeam-echosounder data, 23 sediment samples, bottom video, and 86 still photographs were obtained from an area in Long Island Sound north of Duck Pond Point, New York, in the study area of NOAA survey H11999. This report delineates the sediment types and sea-floor features found within this area in order to better understand the sea-floor processes occurring in this part of Long Island Sound. The sea floor in the study area is dominated by ubiquitous sand-wave fields and three northeast-southwest trending bathymetric depressions. Barchanoid and transverse sand waves, including sinusoidal, bifurcating, arced, and straight-crested morphologies, are variably present. Asymmetrical sand-wave profiles indicate a westward to southwestward direction of sediment transport in most of the study area; current ripples and megaripples on the stoss slopes of the sand waves indicate transport is ongoing. The majority of the sediment on the sea floor is sand, although bouldery, gravelly, and muddy sediments are also present. Gray, cohesive mud crops out on the walls of some of the scour depressions associated with the troughs of large sand waves. Clasts of the muddy sediment scattered on the sea floor around the depressions demonstrate the intensity of the scour and suggest erosion of the underlying distal deltaic sediments.

Map showing depth to basement in the deep-sea basins of the Pacific continental margin, Point Conception to Point Loma

USGS Publications Warehouse

Gardner, J.V.; Cacchione, D.A.; Drake, D.E.; Edwards, B.D.; Field, M.E.; Hampton, M.A.; Karl, Herman A.; Kenyon, Neil H.; Masson, D.G.; McCulloch, D.S.; Grim, M.S.

1992-01-01

Paskevich, V.F., Wong, F.L., O?Malley, J.J., Stevenson, A.J., and Gutmacher, C.E., 2011, GLORIA sidescan-sonar imagery for parts of the U.S. Exclusive Economic Zone and adjacent areas: U.S. Geological Survey Open-File Report 2010?1332, available at http://pubs.usgs.gov/of/2010/1332/.

Semantic Web-based digital, field and virtual geological

NASA Astrophysics Data System (ADS)

Babaie, H. A.

2012-12-01

Digital, field and virtual Semantic Web-based education (SWBE) of geological mapping requires the construction of a set of searchable, reusable, and interoperable digital learning objects (LO) for learners, teachers, and authors. These self-contained units of learning may be text, image, or audio, describing, for example, how to calculate the true dip of a layer from two structural contours or find the apparent dip along a line of section. A collection of multi-media LOs can be integrated, through domain and task ontologies, with mapping-related learning activities and Web services, for example, to search for the description of lithostratigraphic units in an area, or plotting orientation data on stereonet. Domain ontologies (e.g., GeologicStructure, Lithostratigraphy, Rock) represent knowledge in formal languages (RDF, OWL) by explicitly specifying concepts, relations, and theories involved in geological mapping. These ontologies are used by task ontologies that formalize the semantics of computational tasks (e.g., measuring the true thickness of a formation) and activities (e.g., construction of cross section) for all actors to solve specific problems (making map, instruction, learning support, authoring). A SWBE system for geological mapping should also involve ontologies to formalize teaching strategy (pedagogical styles), learner model (e.g., for student performance, personalization of learning), interface (entry points for activities of all actors), communication (exchange of messages among different components and actors), and educational Web services (for interoperability). In this ontology-based environment, actors interact with the LOs through educational servers, that manage (reuse, edit, delete, store) ontologies, and through tools which communicate with Web services to collect resources and links to other tools. Digital geological mapping involves a location-based, spatial organization of geological elements in a set of GIS thematic layers. Each layer in the stack assembles a set of polygonal (e.g., formation, member, intrusion), linear (e.g., fault, contact), and/or point (e.g., sample or measurement site) geological elements. These feature classes, represented in domain ontologies by classes, have their own sets of property (attribute, association relation) and topological (e.g., overlap, adjacency, containment), and network (cross-cuttings; connectivity) relationships. Since geological mapping involves describing and depicting different aspects of each feature class (e.g., contact, formation, structure), the same geographic region may be investigated by different communities, for example, for its stratigraphy, rock type, structure, soil type, and isotopic and paleontological age, using sets of ontologies. These data can become interconnected applying the Semantic Web technologies, on the Linked Open Data Cloud, based on their underlying common geographic coordinates. Sets of geological data published on the Cloud will include multiple RDF links to Cloud's geospatial nodes such as GeoNames and Linked GeoData. During mapping, a device such as smartphone, laptop, or iPad, with GPS and GIS capability and a DBpedia Mobile client, can use the current position to discover and query all the geological linked data, and add new data to the thematic layers and publish them to the Cloud.

The scientific communication for prevention: an ethic mission for the geologists

NASA Astrophysics Data System (ADS)

Romana Lugeri, Francesca; Farabollini, Piero; Aldighieri, Barbara

2013-04-01

Referring to the so called "catastrophic" events often occurring in Italy, emerges clearly the ethical vocation linked to the profession of geologist: today more than ever, is urgent an efficient and timely activation in geo-environmental protection as well as in the field of scientific communication. This era (defined "postmodern" by a socio-economically point of view) is also identified and classified "Anthropocene", term coined by Paul Jozef Crutzen, Nobel Prize in 1995, to define the first geological Era in which human activities have been able to influence the planet Earth and alter its balances. The researchers can advise on some objectives, more urgent or strategic, mainly related to the prevention of risks, and cooperate in finding proper methodological paths to prevent or manage the emergencies. Knowledge is the key tool: the diffusion of scientific heritage, may represent one of the new goals for the Territorial Sciences. At the same time, emerges the need to create a new kind of communication that can activate a wider and conscious target, providing society with correct and clear information on the geo-environmental scenarios of our country. There is an obvious need for a new approach to the problems related to the complex context that now shows us a planet going beyond the critical point. A holistic approach is imperative to study the planet, a method that considers environmental and social ecosystem on the whole, providing all policy makers with a realistic view of the situation and the possible developments. The Landscape is the object of human perceptions and, at the same time, can be considered the result of the interaction of many natural and cultural components: therefore it could become a "medium" to communicate the Earth Sciences to the whole society. Moreover, the landscape is an expression of geology: even at different scales, the endogenous and exogenous processes, and the rocks, as elements of the landscape, condition the evolution of environment and form the base of spatial-temporal development of a region. By integrating different information about the geo-morphological arrangement and the land use of a region, it is possible to reach a complete knowledge of the territory: a multi-scale Landscape approach is even more adopted in the modern geological applied research. The scientific communication is a complex process: a very sensitive point is how to organize the information in a strategic way - thinking about targets and messages in order to better communicate the contents to the largest audience The modern technology offers new powerful tools: the GIS are able to synthesize, manage and represent a large amount of data; thanks to GIS it's almost easy to reach an evaluation of the state of the studied landscapes, referring to the dualism risk/resource which characterizes our country. The use and application of geological maps and other cartographic products GIS based, allows to compare the results of the multi-thematic studies and suggests new strategies, aiming to a common solution for the territorial problems. An ethic way to reach a balanced territorial management and a sustainable development, follows the path of shared knowledge, aiming to involve society in virtuous practices for the territorial protection and enhancement, in a sort of participatory democracy.

Surficial geologic map of the southwest Memphis Quadrangle, Shelby County, Tennessee, and Crittenden County, Arkansas

USGS Publications Warehouse

Moore, David W.; Diehl, Sharon F.

2004-01-01

This map is one of seven 1:24,000-scale (7.5-minute) quadrangle maps of the surficial geology of the Memphis, Tennessee, area--part of a series of urban hazard maps. Wind-deposited silt and clayey silt (loess) is the predominant surficial deposit in this quadrangle. The loess was deposited as dust during the last major continental glaciation of the region and it covers the upland to depths of 4.5-16 m. River alluvium (unit Qal), which is chiefly a sandy and gravelly sand deposit about 30 m thick, underlies the Mississippi River floodplain. This unit supports extensive artificial fill and infrastructure used for shipping storage and petroleum processing and storage. Based on paleoliquefaction structures (sand boils) documented in Mississippi River alluvium elsewhere, this unit probably has the potential to liquefy during strong earthquake shaking. No paleoliquefaction structures were observed within the Southwest Memphis quadrangle. Another deposit in the quadrangle is silty alluvium of the Nonconnah Creek floodplain, and is 1-10 m thick. Sparse, unconsolidated pebbly sand deposits are 0.5-3 m thick and make up point bars and channel deposits of Nonconnah Creek.

Physical and Economic Integration of Carbon Capture Methods with Sequestration Sinks

NASA Astrophysics Data System (ADS)

Murrell, G. R.; Thyne, G. D.

2007-12-01

Currently there are several different carbon capture technologies either available or in active development for coal- fired power plants. Each approach has different advantages, limitations and costs that must be integrated with the method of sequestration and the physiochemical properties of carbon dioxide to evaluate which approach is most cost effective. For large volume point sources such as coal-fired power stations, the only viable sequestration sinks are either oceanic or geological in nature. However, the carbon processes and systems under consideration produce carbon dioxide at a variety of pressure and temperature conditions that must be made compatible with the sinks. Integration of all these factors provides a basis for meaningful economic comparisons between the alternatives. The high degree of compatibility between carbon dioxide produced by integrated gasification combined cycle technology and geological sequestration conditions makes it apparent that this coupling currently holds the advantage. Using a basis that includes complete source-to-sink sequestration costs, the relative cost benefit of pre-combustion IGCC compared to other post-combustion methods is on the order of 30%. Additional economic benefits arising from enhanced oil recovery revenues and potential sequestration credits further improve this coupling.

Bringing the Global Scale to Education in Natural Resources Management

NASA Astrophysics Data System (ADS)

Turner, D. P.

2017-12-01

Given the ominous trajectory of rapid global environmental change, environmental managers must grapple with global scale structures, processes, and concepts. The concept of the Anthropocene Epoch, albeit contested, is highly integrative across disciplines and temporal scales, and thus potentially helpful in the context of educating environmental managers. It can be framed temporally in terms of the geologic history of the global environment, the initiation and acceleration of anthropogenic impacts on the environment, and a future global environment that is highly dependent on human decisions. A key lesson from Earth's pre-human geologic history is that global climate has generally been linked to greenhouse gas concentrations, and many mass extinction events were associated with high greenhouse gas concentrations. The pervasive impacts of the contemporary technosphere on the biosphere point especially to the need to conserve biosphere capital. Scenarios of Earth's future environment, based on Earth system models, suggest that business-as-usual technologies and economic practices will set the stage for a biophysical environment that is hostile (if not inimical) to a high technology global civilization. These lessons can inform and inspire sub-global management efforts to mitigate and adapt to global environmental change.

A new scheme for velocity analysis and imaging of diffractions

NASA Astrophysics Data System (ADS)

Lin, Peng; Peng, Suping; Zhao, Jingtao; Cui, Xiaoqin; Du, Wenfeng

2018-06-01

Seismic diffractions are the responses of small-scale inhomogeneities or discontinuous geological features, which play a vital role in the exploitation and development of oil and gas reservoirs. However, diffractions are generally ignored and considered as interference noise in conventional data processing. In this paper, a new scheme for velocity analysis and imaging of seismic diffractions is proposed. Two steps compose of this scheme in our application. First, the plane-wave destruction method is used to separate diffractions from specular reflections in the prestack domain. Second, in order to accurately estimate migration velocity of the diffractions, the time-domain dip-angle gathers are derived from a Kirchhoff-based angle prestack time migration using separated diffractions. Diffraction events appear flat in the dip-angle gathers when imaged above the diffraction point with selected accurate migration velocity for diffractions. The selected migration velocity helps to produce the desired prestack imaging of diffractions. Synthetic and field examples are applied to test the validity of the new scheme. The diffraction imaging results indicate that the proposed scheme for velocity analysis and imaging of diffractions can provide more detailed information about small-scale geologic features for seismic interpretation.

Digital Geologic Map of the Nevada Test Site and Vicinity, Nye, Lincoln, and Clark Counties, Nevada, and Inyo County, California

USGS Publications Warehouse

Slate, Janet L.; Berry, Margaret E.; Rowley, Peter D.; Fridrich, Christopher J.; Morgan, Karen S.; Workman, Jeremiah B.; Young, Owen D.; Dixon, Gary L.; Williams, Van S.; McKee, Edwin H.; Ponce, David A.; Hildenbrand, Thomas G.; Swadley, W.C.; Lundstrom, Scott C.; Ekren, E. Bartlett; Warren, Richard G.; Cole, James C.; Fleck, Robert J.; Lanphere, Marvin A.; Sawyer, David A.; Minor, Scott A.; Grunwald, Daniel J.; Laczniak, Randell J.; Menges, Christopher M.; Yount, James C.; Jayko, Angela S.

1999-01-01

This digital geologic map of the Nevada Test Site (NTS) and vicinity, as well as its accompanying digital geophysical maps, are compiled at 1:100,000 scale. The map compilation presents new polygon (geologic map unit contacts), line (fault, fold axis, metamorphic isograd, dike, and caldera wall) and point (structural attitude) vector data for the NTS and vicinity, Nye, Lincoln, and Clark Counties, Nevada, and Inyo County, California. The map area covers two 30 x 60-minute quadrangles-the Pahute Mesa quadrangle to the north and the Beatty quadrangle to the south-plus a strip of 7.5-minute quadrangles on the east side-72 quadrangles in all. In addition to the NTS, the map area includes the rest of the southwest Nevada volcanic field, part of the Walker Lane, most of the Amargosa Desert, part of the Funeral and Grapevine Mountains, some of Death Valley, and the northern Spring Mountains. This geologic map improves on previous geologic mapping of the same area (Wahl and others, 1997) by providing new and updated Quaternary and bedrock geology, new geophysical interpretations of faults beneath the basins, and improved GIS coverages. Concurrent publications to this one include a new isostatic gravity map (Ponce and others, 1999) and a new aeromagnetic map (Ponce, 1999).

Nanoscale Chemical Processes Affecting Storage Capacities and Seals during Geologic CO2 Sequestration.

PubMed

Jun, Young-Shin; Zhang, Lijie; Min, Yujia; Li, Qingyun

2017-07-18

Geologic CO 2 sequestration (GCS) is a promising strategy to mitigate anthropogenic CO 2 emission to the atmosphere. Suitable geologic storage sites should have a porous reservoir rock zone where injected CO 2 can displace brine and be stored in pores, and an impermeable zone on top of reservoir rocks to hinder upward movement of buoyant CO 2 . The injection wells (steel casings encased in concrete) pass through these geologic zones and lead CO 2 to the desired zones. In subsurface environments, CO 2 is reactive as both a supercritical (sc) phase and aqueous (aq) species. Its nanoscale chemical reactions with geomedia and wellbores are closely related to the safety and efficiency of CO 2 storage. For example, the injection pressure is determined by the wettability and permeability of geomedia, which can be sensitive to nanoscale mineral-fluid interactions; the sealing safety of the injection sites is affected by the opening and closing of fractures in caprocks and the alteration of wellbore integrity caused by nanoscale chemical reactions; and the time scale for CO 2 mineralization is also largely dependent on the chemical reactivities of the reservoir rocks. Therefore, nanoscale chemical processes can influence the hydrogeological and mechanical properties of geomedia, such as their wettability, permeability, mechanical strength, and fracturing. This Account reviews our group's work on nanoscale chemical reactions and their qualitative impacts on seal integrity and storage capacity at GCS sites from four points of view. First, studies on dissolution of feldspar, an important reservoir rock constituent, and subsequent secondary mineral precipitation are discussed, focusing on the effects of feldspar crystallography, cations, and sulfate anions. Second, interfacial reactions between caprock and brine are introduced using model clay minerals, with focuses on the effects of water chemistries (salinity and organic ligands) and water content on mineral dissolution and surface morphology changes. Third, the hydrogeological responses (using wettability alteration as an example) of clay minerals to chemical reactions are discussed, which connects the nanoscale findings to the transport and capillary trapping of CO 2 in the reservoirs. Fourth, the interplay between chemical and mechanical alterations of geomedia, using wellbore cement as a model geomedium, is examined, which provides helpful insights into wellbore and caprock integrities and CO 2 mineralization. Combining these four aspects, our group has answered questions related to nanoscale chemical reactions in subsurface GCS sites regarding the types of reactions and the property alterations of reservoirs and caprocks. Ultimately, the findings can shed light on the influences of nanoscale chemical reactions on storage capacities and seals during geologic CO 2 sequestration.

The interoperability skill of the Geographic Portal of the ISPRA - Geological Survey of Italy

NASA Astrophysics Data System (ADS)

Pia Congi, Maria; Campo, Valentina; Cipolloni, Carlo; Delogu, Daniela; Ventura, Renato; Battaglini, Loredana

2010-05-01

The Geographic Portal of Geological Survey of Italy (ISPRA) available at http://serviziogeologico.apat.it/Portal was planning according to standard criteria of the INSPIRE directive. ArcIMS services and at the same time WMS and WFS services had been realized to satisfy the different clients. For each database and web-services the metadata had been wrote in agreement with the ISO 19115. The management architecture of the portal allow it to encode the clients input and output requests both in ArcXML and in GML language. The web-applications and web-services had been realized for each database owner of Land Protection and Georesources Department concerning the geological map at the scale 1:50.000 (CARG Project) and 1:100.000, the IFFI landslide inventory, the boreholes due Law 464/84, the large-scale geological map and all the raster format maps. The portal thus far published is at the experimental stage but through the development of a new graphical interface achieves the final version. The WMS and WFS services including metadata will be re-designed. The validity of the methodology and the applied standards allow to look ahead to the growing developments. In addition to this it must be borne in mind that the capacity of the new geological standard language (GeoSciML), which is already incorporated in the web-services deployed, will be allow a better display and query of the geological data according to the interoperability. The characteristics of the geological data demand for the cartographic mapping specific libraries of symbols not yet available in a WMS service. This is an other aspect regards the standards of the geological informations. Therefore at the moment were carried out: - a library of geological symbols to be used for printing, with a sketch of system colors and a library for displaying data on video, which almost completely solves the problems of the coverage point and area data (also directed) but that still introduces problems for the linear data (solutions: ArcIMS services from Arcmap projects or a specific SLD implementation for WMS services); - an update of "Guidelines for the supply of geological data" in a short time will be published; - the Geological Survey of Italy is officially involved in the IUGS-CGI working group for the processing and experimentation on the new GeoSciML language with the WMS/WFS services. The availability of geographic informations occurs through the metadata that can be distributed online so that search engines can find them through specialized research. The collected metadata in catalogs are structured in a standard (ISO 19135). The catalogs are a ‘common' interface to locate, view and query data and metadata services, web services and other resources. Then, while working in a growing sector of the environmental knowledgement the focus is to collect the participation of other subjects that contribute to the enrichment of the informative content available, so as to be able to arrive to a real portal of national interest especially in case of disaster management.

Comments on Potential Geologic and Seismic Hazards Affecting Proposed Liquefied Natural Gas Site in Santa Monica Bay, California

USGS Publications Warehouse

Ross, Stephanie L.; Lee, Homa J.; Parsons, Tom E.; Beyer, Larry A.; Boore, David M.; Conrad, James E.; Edwards, Brian D.; Fisher, Michael A.; Frankel, Arthur D.; Geist, Eric L.; Hudnut, Kenneth W.; Hough, Susan E.; Kayen, Robert E.; Lorenson, T.D.; Luco, Nicolas; McCrory, Patricia A.; McGann, Mary; Nathenson, Manuel; Nolan, Michael; Petersen, Mark D.; Ponti, Daniel J.; Powell, Charles L.; Ryan, Holly F.; Tinsley, John C.; Wills, Chris J.; Wong, Florence L.; Xu, Jingping

2008-01-01

In a letter to the U.S. Geological Survey (USGS) dated March 25, 2008, Representative Jane Harman (California 36th district) requested advice on geologic hazards that should be considered in the review of a proposed liquefied natural gas (LNG) facility off the California coast in Santa Monica Bay. In 2004, the USGS responded to a similar request from Representative Lois Capps, regarding two proposed LNG facilities offshore Ventura County, Calif., with a report summarizing potential geologic and seismic hazards (Ross and others, 2004). The proposed LNG Deepwater Port (DWP) facility includes single point moorings (SPMs) and 35 miles of underwater pipelines. The DWP submersible buoys, manifolds, and risers would be situated on the floor of the southern Santa Monica Basin, in 3,000 feet of water, about 23 miles offshore of the Palos Verdes Peninsula. Twin 24-inch diameter pipelines would extend northeastward from the buoys across the basin floor, up the basin slope and across the continental shelf, skirting north around the Santa Monica submarine canyon. Figure 1 provides locations of the project and geologic features. Acronyms are defined in table 1. This facility is being proposed in a region of known geologic hazards that arise from both the potential for strong earthquakes and geologic processes related to sediment transport and accumulation in the offshore environment. The probability of a damaging earthquake (considered here as magnitude 6.5 or greater) in the next 30 years within about 30 miles (50 km) of the proposed pipeline ranges from 16% at the pipeline's offshore end to 48% where it nears land (Petersen, 2008). Earthquakes of this magnitude are capable of producing strong shaking, surface fault offsets, liquefaction phenomena, landslides, underwater turbidity currents and debris flow avalanches, and tsunamis. As part of the DWP license application for the Woodside Natural Gas proposal in Santa Monica Bay (known as the OceanWay Secure Energy Project), Fugro West, Inc., had already prepared a document discussing geologic hazards in the area, titled 'Exhibit B Topic Report 6 - Geological Resources' (Fugro West, Inc., 2007); hereafter, this will be called the 'Geological Resources document'. The USGS agreed to evaluate the information in the Geological Resources document regarding (1) proximity of active faults to the proposed project, (2) potential magnitude of seismic events from nearby faults, (3) thoroughness of the assessment of earthquake hazards in general, (4) potential hazards from ground rupture and strong shaking, (5) potential hazards from tsunamis, and (6) other geologic hazards including landslides and debris flows. Because two new earthquake probability reports were scheduled to be released in mid-April, 2008, by the USGS and the California Geological Survey (CGS), the USGS suggested a 6-month review period to enable a thorough incorporation of this new information. Twenty-seven scientists from the USGS and the CGS reviewed various sections of the Geological Resources document. This report outlines our major conclusions. The appendix is a longer list of comments by these reviewers, grouped by section of the Geological Resources document. Before discussing our reviews, we first provide a brief overview of geologic hazards in the proposed site area. This report is a snapshot in time and any future work in the area will need to take into account ongoing research efforts. For example, USGS scientists collected seismic reflection data in the spring of 2008 to study the structure and seismic potential of several faults in the area. Their interpretations (Conrad and others, 2008a and 2008b) are too preliminary to be included in this report, but their final results, along with other researchers' studies in the project area, should be considered in any future work on the Deepwater Port project.

Integration of geological remote-sensing techniques in subsurface analysis

USGS Publications Warehouse

Taranik, James V.; Trautwein, Charles M.

1976-01-01

Geological remote sensing is defined as the study of the Earth utilizing electromagnetic radiation which is either reflected or emitted from its surface in wavelengths ranging from 0.3 micrometre to 3 metres. The natural surface of the Earth is composed of a diversified combination of surface cover types, and geologists must understand the characteristics of surface cover types to successfully evaluate remotely-sensed data. In some areas landscape surface cover changes throughout the year, and analysis of imagery acquired at different times of year can yield additional geological information. Integration of different scales of analysis allows landscape features to be effectively interpreted. Interpretation of the static elements displayed on imagery is referred to as an image interpretation. Image interpretation is dependent upon: (1) the geologist's understanding of the fundamental aspects of image formation, and (2.) his ability to detect, delineate, and classify image radiometric data; recognize radiometric patterns; and identify landscape surface characteristics as expressed on imagery. A geologic interpretation integrates surface characteristics of the landscape with subsurface geologic relationships. Development of a geologic interpretation from imagery is dependent upon: (1) the geologist's ability to interpret geomorphic processes from their static surface expression as landscape characteristics on imagery, (2) his ability to conceptualize the dynamic processes responsible for the evolution 6f interpreted geologic relationships (his ability to develop geologic models). The integration of geologic remote-sensing techniques in subsurface analysis is illustrated by development of an exploration model for ground water in the Tucson area of Arizona, and by the development of an exploration model for mineralization in southwest Idaho.

Teachers doing science: An authentic geology research experience for teachers

USGS Publications Warehouse

Hemler, D.; Repine, T.

2006-01-01

Fairmont State University (FSU) and the West Virginia Geological and Economic Survey (WVGES) provided a small pilot group of West Virginia science teachers with a professional development session designed to mimic experiences obtained by geology majors during a typical summer field camp. Called GEOTECH, the program served as a research capstone event complimenting the participants' multi-year association with the RockCamp professional development program. GEOTECH was funded through a Improving Teacher Quality Grant administered by West Virginia Higher Education Policy Commission. Over the course of three weeks, eight GEOTEACH participants learned field measurement and field data collection techniques which they then applied to the construction of a surficial geologic map. The program exposed participants to authentic scientific processes by emphasizing the authentic scientific application of content knowledge. As a secondary product, it also enhanced their appreciation of the true nature of science in general and geology particular. After the session, a new appreciation of the effort involved in making a geologic map emerged as tacit knowledge ready to be transferred to their students. The program was assessed using pre/post instruments, cup interviews, journals, artifacts (including geologic maps, field books, and described sections), performance assessments, and constructed response items. Evaluation of the accumulated data revealed an increase in participants demonstrated use of science content knowledge, an enhanced awareness and understanding of the processes and nature of geologic mapping, positive dispositions toward geologic research and a high satisfaction rating for the program. These findings support the efficacy of the experience and document future programmatic enhancements.

Promoting open access to science through effective communication

NASA Astrophysics Data System (ADS)

Egger, A. E.

2006-12-01

Geology is a difficult subject to communicate effectively. Many people associate geology with memorizing rock and mineral names and not with dynamic earth processes. Even more challenging for the non-geologist is the concept of deep time, and why processes that happened millions of years ago are important to us today. Additionally, many people view science itself as inaccessible and difficult. And yet, geology is a naturally accessible subject, as it is all around us. In order to communicate effectively, geologists must convince others that their work is both accessible and relevant, even though it may not directly generate economic benefits or lend insight into solutions for our modern problems like climate change. As scientists, we know the connections are there, but convincing others requires creating face-to-face, positive interactions through the use of active techniques to help bring the audience to an understanding of the process of science in addition to the subject matter itself. My overarching motive for creating and participating in communication activities with a broad audience is thus to demonstrate that science is accessible to everyone, that a scientific way of thinking can be both fun and useful, and that a little knowledge about geology can give you a new perspective on the world. Using this motivation as a guiding principle regardless of the specific audience, two techniques are important to make the communication effective. First, whenever possible, I conduct activities in the field (broadly speaking), or at least bring the field into the talk, and model the scientific process by asking for participation. This allows the audience to fully understand how geologic work is done, including the mundane and the mistakes. Second, I take my audience seriously, including all questions and observations, in order to build confidence in everyone that they are able to contribute to and understand both geology and the scientific process in general. Despite the apparent simplicity of these motivations and techniques, they serve as an important reminder when designing an opportunity for communication to the general public. As a result, people frequently respond very positively not only to the presentation itself, but also to science and geology in general.

Significant achievements in the planetary geology program, 1981

NASA Technical Reports Server (NTRS)

Mouginis-Mark, P. J.

1982-01-01

Recent developments in planetology research are summarized. Important developments are summarized in topics ranging from solar system evolution, comparative planetology, and geologic processes, to techniques and instrument development for future exploration.

U.S. Geological Survey coastal and marine geology research; recent highlights and achievements

USGS Publications Warehouse

Williams, S. Jeffress; Barnes, Peter W.; Prager, Ellen J.

2000-01-01

The USGS Coastal and Marine Geology Program has large-scale national and regional research projects that focus on environmental quality, geologic hazards, natural resources, and information transfer. This Circular highlights recent scientific findings of the program, which play a vital role in the USGS endeavor to understand human interactions with the natural environment and to determine how the fundamental geologic processes controlling the Earth work. The scientific knowledge acquired through USGS research and monitoring is critically needed by planners, government agencies, and the public. Effective communication of the results of this research will enable the USGS Coastal and Marine Geology Program to play an integral part in assisting the Nation in responding the pressing Earth science challenges of the 21st century.

Experimental flights using a small unmanned aircraft system for mapping emergent sandbars

USGS Publications Warehouse

Kinzel, Paul J.; Bauer, Mark A.; Feller, Mark R.; Holmquist-Johnson, Christopher; Preston, Todd

2015-01-01

The US Geological Survey and Parallel Inc. conducted experimental flights with the Tarantula Hawk (T-Hawk) unmanned aircraft system (UAS ) at the Dyer and Cottonwood Ranch properties located along reaches of the Platte River near Overton, Nebraska, in July 2013. We equipped the T-Hawk UAS platform with a consumer-grade digital camera to collect imagery of emergent sandbars in the reaches and used photogrammetric software and surveyed control points to generate orthophotographs and digital elevation models (DEMS ) of the reaches. To optimize the image alignment process, we retained and/or eliminated tie points based on their relative errors and spatial resolution, whereby minimizing the total error in the project. Additionally, we collected seven transects that traversed emergent sandbars concurrently with global positioning system location data to evaluate the accuracy of the UAS survey methodology. The root mean square errors for the elevation of emergent points along each transect across the DEMS ranged from 0.04 to 0.12 m. If adequate survey control is established, a UAS combined with photogrammetry software shows promise for accurate monitoring of emergent sandbar morphology and river management activities in short (1–2 km) river reaches.

Database for volcanic processes and geology of Augustine Volcano, Alaska

USGS Publications Warehouse

McIntire, Jacqueline; Ramsey, David W.; Thoms, Evan; Waitt, Richard B.; Beget, James E.

2012-01-01

This digital release contains information used to produce the geologic map published as Plate 1 in U.S. Geological Survey Professional Paper 1762 (Waitt and Begét, 2009). The main component of this digital release is a geologic map database prepared using geographic information systems (GIS) applications. This release also contains links to files to view or print the map plate, accompanying measured sections, and main report text from Professional Paper 1762. It should be noted that Augustine Volcano erupted in 2006, after the completion of the geologic mapping shown in Professional Paper 1762 and presented in this database. Information on the 2006 eruption can be found in U.S. Geological Survey Professional Paper 1769. For the most up to date information on the status of Alaska volcanoes, please refer to the U.S. Geological Survey Volcano Hazards Program website.

Activities in planetary geology for the physical and earth sciences

NASA Technical Reports Server (NTRS)

Dalli, R.; Greeley, R.

1982-01-01

A users guide for teaching activities in planetary geology, and for physical and earth sciences is presented. The following topics are discussed: cratering; aeolian processes; planetary atmospheres, in particular the Coriolis Effect and storm systems; photogeologic mapping of other planets, Moon provinces and stratigraphy, planets in stereo, land form mapping of Moon, Mercury and Mars, and geologic features of Mars.

OneGeology: Making the World’s Geological Map Data Accessible Online

NASA Astrophysics Data System (ADS)

Broome, H.; Jackson, I.; Robida, F.; Thorleifson, H.

2009-12-01

OneGeology (http://onegeology.org) is a successful international initiative of the geological surveys of the world and the flagship project of the ‘International Year of Planet Earth’. Its aim is to provide dynamic web access to geological map data covering the world, creating a focus for accessing geological information for everyone. Thanks to the enthusiasm and support of participating nations the initiative has progressed rapidly and geological surveys and the many users of their data are excited about this ground-breaking project. Currently 10 international geoscience organizations have endorsed the initiative and more than 109 countries have agreed to participate. OneGeology works with whatever digital format is available in each country. The target scale is 1:1 million, but the project is pragmatic and accepts a range of scales and the best available data. The initiative recognizes that different nations have differing abilities to participate and transfer of know-how to those who need it is a key aspect of the approach. A key contributor to the success of OneGeology has been its utilization of the latest new web technology and an emerging data exchange standard for geological map data called GeoSciML. GeoSciML (GeoScience Markup Language) is a schema written in GML (Geography Markup Language) for geological data. GeoSciML has the ability to represent both the geography (geometries e.g. polygons, lines and points) and geological attribution in a clear and structured format. OneGeology was launched March 2007 at the inaugural workshop in Brighton England. At that workshop the 43 participating nations developed a declaration of a common objective and principles called the “Brighton Accord” (http://onegeology.org/what_is/accord.html) . Work was initiated immediately and the resulting OneGeology Portal was launched at the International Geological Congress in Oslo in August 2008 by Simon Winchester, author of “The Map that Changed the World”. Since the successful launch, OneGeology participants have continued working both to increase national participation and content, and to put in place a more formal governance structure to oversee the long term evolution of the initiative. OneGeology is an example of collaboration in action and is both multilateral and multinational. In 2007, a group of motivated geoscientists and data managers identified an opportunity and took the initiative to engage their peers to work in concert to achieve a shared objective. OneGeology has facilitated collaborative development of an Internet site that provides unprecedented online access to global geological map data.

Geologic interpretation and multibeam bathymetry of the sea floor in southeastern Long Island Sound

USGS Publications Warehouse

Poppe, Lawrence J.; Ackerman, Seth D.; Doran, Elizabeth F.; Moser, Marc S.; Stewart, Helen F.; Forfinski, Nicholas A.; Gardner, Uther L.; Keene, Jennifer A.

2006-01-01

Digital terrain models (DTMs) produced from multibeam echosounder (MBES) bathymetric data provide valuable base maps for marine geological interpretations (e.g. Todd and others, 1999; Mosher and Thomson, 2002; ten Brink and others, 2004; Poppe and others, 2006a,b). These maps help define the geological variability of the sea floor (one of the primary controls of benthic habitat diversity); improve our understanding of the processes that control the distribution and transport of bottom sediments, the distribution of benthic habitats and associated infaunal community structures; and provide a detailed framework for future research, monitoring, and management activities. The bathymetric survey interpreted herein (National Oceanic and Atmospheric Administration (NOAA) survey H11255) covers roughly 95 km? of sea floor in southeastern Long Island Sound (fig. 1). This bathymetry has been examined in relation to seismic reflection data collected concurrently, as well as archived seismic profiles acquired as part of a long-standing geologic mapping partnership between the State of Connecticut and the U.S. Geological Survey (USGS). The objective of this work was to use these geophysical data sets to interpret geomorphological attributes of the sea floor in terms of the Quaternary geologic history and modern sedimentary processes within Long Island Sound.

Rocks above the clouds: A hiker's and climber's guide to Colorado mountain geology

USGS Publications Warehouse

Reed, Jack; Ellis, Gene

2008-01-01

Rocks Above the Clouds is the first geology book written for climbers, scramblers and hikers. It is an exploration of how the nature of mountains and the challenges they present to the climber and hiker are influenced by the rocks that form them, in other words, by their geology. After describing the types of rocks found in mountains, the authors of Rocks Above the Clouds cover the geologic process from the big bang through the processes that continue to shape the mountains today. This mountain geology primer is a range-by-range description of what to expect in the Colorado mountains followed by some very curious information on the Colorado 14ers. Whether you travel in the mountains as a casual hiker, peak bagging scrambler, or technical climber, knowledge of mountain geology can help in planning your route, selecting your campsite and evaluating the hazards you face. Knowing something about different rock types might enable you to pick a route that avoids loose rock. Knowing that when wet, a particular rock surface will feel like oil might encourage you to forgo that siesta on the summit and head down before the afternoon thunderstorm.

Frozen in Time? Microbial strategies for survival and carbon metabolism over geologic time in a Pleistocene permafrost chronosequence

NASA Astrophysics Data System (ADS)

Mackelprang, R.; Douglas, T. A.; Waldrop, M. P.

2014-12-01

Permafrost soils have received tremendous interest due to their importance as a global carbon store with the potential to be thawed over the coming centuries. Instead of being 'frozen in time,' permafrost contains active microbes. Most metagenomic studies have focused on Holocene aged permafrost. Here, we target Pleistocene aged ice and carbon rich permafrost (Yedoma), which can differ in carbon content and stage of decay. Our aim was to understand how microbes in the permafrost transform organic matter over geologic time and to identify physiological and biochemical adaptations that enable long-term survival. We used next-generation sequencing to characterize microbial communities along a permafrost age gradient. Samples were collected from the Cold Regions Research and Engineering Laboratory (CRREL) Permafrost Tunnel near Fox, AK, which penetrates a hillside providing access to permafrost ranging in age from 12 to 40 kyr. DNA was extracted directly from unthawed samples. 16S rRNA amplicon (16S) and shotgun metagenome sequencing revealed significant age-driven differences. First, microbial diversity declines with permafrost age, likely due to long-term exposure to environmental stresses and a reduction in metabolic resources. Second, we observed taxonomic differences among ages, with an increasing abundance of Firmicutes (endospore-formers) in older samples, suggesting that dormancy is a common survival strategy in older permafrost. Ordination of 16S and metagenome data revealed age-based clustering. Genes differing significantly between age categories included those involved in lipopolysaccharide assembly, cold-response, and carbon processing. These data point to the physiological adaptations to long-term frozen conditions and to the metabolic processes utilized in ancient permafrost. In fact, a gene common in older samples is involved in cadaverine production, which could potentially explain the putrefied smell of Pleistocene aged permafrost. Coupled with soil chemistry analysis, these processes show how a tightly linked microbial food web can survive over geologic time with no influx of new energy or materials. This web may also help to explain differences in Pleistocene carbon chemistry and why this carbon is highly bioavailable for microbial consumption post thaw.

Geomorphic degradations on the surface of venus: an analysis of venera 9 and venera 10 data.

PubMed

Florensky, C P; Ronca, L B; Basilevsky, A T

1977-05-20

On the basis of the physical and chemical measurements made on the surface of Venus and transmitted back to Earth by the Soviet automatic landers Venera 9 and Venera 10, a geomorphically inactive environment should be expected. An analysis of the television photographs reveals, however, that at least two processes of degradation occur. One operates on a scale of decimeters to meters and is responsible for the fracturing of a layered source rock and the subsequent downslope movement of the fragments. Mass-wasting, perhaps activated by venusian quakes or by unknown geological processes, is likely to be the agent. Another geomorphic degradation process occurs on the scale of a centimeter or less and is responsible for the rounding of edges and the pitting of rock surfaces. The agents of this process are not known, but atmospheric action, perhaps in connection with volcanic episodes, may be the cause. From a geomorphic point of view, the landscape of the Venera 9 landing site can be considered young and that of the Venera 10 landing site, mature.

Installation Restoration Program. Phase I. Records Search, Hazardous Materials Disposal Sites. Myrtle Beach Air Force Base, South Carolina.

DTIC Science & Technology

1981-10-01

Geography 3-1 Topography 3-. Drainage 3-1 ii Page Surface Geology 3-3 Barrier Sediments 3-3 Myrtle Beach Backbarrier Sediments 3-3 soils 3-5 Subsurface...Beach AFB Surface Drainage and Surface Water Sampling Points 3-2 3.2 Myrtle Beach AFB Surface Soils 3-4 3.3 Myrtle Beach AFB Location of Geologic Cross...has created a potential contamination problem. This situation is compounded by the site’s sandy soil and shallow ground water table. b.) Weathering Pit

Field guide to Laramide basin evolution and drilling activity in North Park and Middle Park, Colorado

USGS Publications Warehouse

Dechesne, Marieke; Cole, James Channing; Martin, Christopher B.

2016-01-01

Overview of the geologic history of the North Park–Middle Park area and its past and recent drilling activity. Field trip stops highlight basin formation and the consequences of geologic configuration on oil and gas plays and development. The starting point is the west flank of the Denver Basin to compare and contrast the latest Cretaceous through Eocene basin fill on both flanks of the Front Range, before exploring sediments of the same age in the North Park – Middle Park intermontane basin.

Geology and Geohydrology at CRREL, Hanover, New Hampshire: Relationship to Subsurface Contamination

DTIC Science & Technology

1992-11-01

8217 4345’ -. . . p L E G E N D --------O :------- ’ 0. .. -/ KYANITE - STAUROLITE / ~ . -*ZONE - • STAUROLITE ZONE / ,’’"’’":’:": E• GARNJET ZONE...water partition coefficient: 126 mL/g to the following equation (after Hubbert 1953) Density: 1.46 g/cm 3 Boiling point at 760 torr pressure: 87°C...Washington, D.C.: U.S. Govern-Bullein No 19.ment Printing Office. Stewart, D.P. and P. MacClintock (1969) The surfi- melt Png O.cial geology and pleistocene

Megascale processes: Natural disasters and human behavior

USGS Publications Warehouse

Kieffer, S.W.; Barton, P.; Chesworth, W.; Palmer, A.R.; Reitan, P.; Zen, E.-A.

2009-01-01

Megascale geologic processes, such as earthquakes, tsunamis, volcanic eruptions, floods, and meteoritic impacts have occurred intermittently throughout geologic time, and perhaps on several planets. Unlike other catastrophes discussed in this volume, a unique process is unfolding on Earth, one in which humans may be the driving agent of megadisasters. Although local effects on population clusters may have been catastrophic in the past, human societies have never been interconnected globally at the scale that currently exists. We review some megascale processes and their effects in the past, and compare present conditions and possible outcomes. We then propose that human behavior itself is having effects on the planet that are comparable to, or greater than, these natural disasters. Yet, unlike geologic processes, human behavior is potentially under our control. Because the effects of our behavior threaten the stability, or perhaps even existence, of a civilized society, we call for the creation of a body to institute coherent global, credible, scientifi cally based action that is sensitive to political, economic, religious, and cultural values. The goal would be to institute aggressive monitoring, identify and understand trends, predict their consequences, and suggest and evaluate alternative actions to attempt to rescue ourselves and our ecosystems from catastrophe. We provide a template modeled after several existing national and international bodies. ?? 2009 The Geological Society of America.

Geologic Evolution of Eastern Hellas, Mars: Styles and Timing of Volatile-driven Activity

NASA Technical Reports Server (NTRS)

Crown, David A.; Bleamaster, Leslie F., III; Mest, Scott C.

2004-01-01

The east rim of the Hellas basin and the surrounding highlands comprise a geologically significant region for evaluating volatile abundance, volatile distribution and cycling, and potential changes in Martian environmental conditions. This region of the Martian surface exhibits landforms shaped by a diversity of geologic processes and has a well-preserved geologic record, with exposures of Noachian, Hesperian, and Amazonian units, as well as spans a wide range in both latitude and elevation due to the magnitude of Hellas basin. In addition, geologically contemporaneous volcanism and volatile-driven activity in the circum-Hellas highlands provide important ingredients for creating habitats for potential Martian life.

Digital data and geologic map of the Powder Mill Ferry Quadrangle, Shannon and Reynolds counties, Missouri

USGS Publications Warehouse

McDowell, Robert C.; Harrison, Richard W.; Lagueux, Kerry M.

2000-01-01

The geology of the Powder Mill Ferry 7 1/2-minute quadrangle , Shannon and Reynolds Counties, Missouri was mapped from 1997 through 1998 as part of the Midcontinent Karst Systems and Geologic Mapping Project, Eastern Earth Surface Processes Team. The map supports the production of a geologic framework that will be used in hydrogeologic investigations related to potential lead and zinc mining in the Mark Twain National Forest adjacent to the Ozark National Scenic Riverways (National Park Service). Digital geologic coverages will be used by other federal and state agencies in hydrogeologic analyses of the Ozark karst system and in ecological models.

Habitat geology studies on and near Georges Bank, off New England

USGS Publications Warehouse

Valentine, P.C.

2001-01-01

Marine habitat geology is the study of the distribution of geologic materials that form the seabed, the geologic processes (such as sediment movement and deposition) that affect the seabed, and the interplay of geologic factors and species behavior that gives rise to biological habitats in general and to specific habitats deemed essential to the success of a particular species (essential fish habitats, EFH's). Georges Bank was once the premier East Coast fishing ground for groundfish and scallops. The decline of groundfish species due to overfishing contributed to the increasingly restrictive management of fish stocks and a need to identify and protect EFH's.

The role of geoethics in the framework of a sustainable development of georesources supply

NASA Astrophysics Data System (ADS)

Buttinelli, Mauro; Barba, Salvatore; Di Capua, Giuseppe; Peppoloni, Silvia

2015-04-01

Geoethics consists of the researches and reflections on those values upon which are based the appropriate practices concerning human activities interesting Geosphere. Since Geoethics deals with ethical, social and cultural implications of geological research, it also reflects the opportunity for any researcher to become more conscious of the social role and responsibilities in conducting activities related to the environmental management and geo-resources exploitation. In this context Geoethics would also represent a concrete tool to sensitize and influence the awareness of society opening questions on the reliability and sustainability of the technological options presently proposed as a way to answer the huge global energy demand. Aim of this note is to generally discuss the role of geoscientists in the framework of the development of a sustainable energy supply chain related to georesources exploitation, in terms of making ethical choices during each phase of the process, from the research of potential sources of energy to their feasible and reliable exploitation. Since the beginning of energetic revolution, the well established energy supply chain technological models often force the research community to approach such system unconsciously accepting it, or conversely refusing it at all. We would point out that make geoethical choices for georesources supply purposes should not be to prejudicially counteract the whole supply system, but rather to base the research activity on a solid background scheme of perspectives, principles and criteria which could make the people aware of the improvements and drawbacks of their work. This basically means to avoid the overexploitation of non-renewable resources, to fairly develop more efficient technological and green procedures abating the local and/or the diffuse pollution, or consciously and carelessly expose vulnerable elements like humans and infrastructures to natural and artificial geological hazards. This process could be possible only if the connections between each part of the georesources supply chain is known, because at those points the ethical and sustainable research actions must be grafted. Several geoethical processes are already ongoing, therefore it could be useful to analyze them in terms of what can we learn and export to improve a more fair and sustainable global georesources supply model, as well as to mitigate such problems related to non-geoethical but already established processes.

Semantics-informed geological maps: Conceptual modeling and knowledge encoding

NASA Astrophysics Data System (ADS)

Lombardo, Vincenzo; Piana, Fabrizio; Mimmo, Dario

2018-07-01

This paper introduces a novel, semantics-informed geologic mapping process, whose application domain is the production of a synthetic geologic map of a large administrative region. A number of approaches concerning the expression of geologic knowledge through UML schemata and ontologies have been around for more than a decade. These approaches have yielded resources that concern specific domains, such as, e.g., lithology. We develop a conceptual model that aims at building a digital encoding of several domains of geologic knowledge, in order to support the interoperability of the sources. We apply the devised terminological base to the classification of the elements of a geologic map of the Italian Western Alps and northern Apennines (Piemonte region). The digitally encoded knowledge base is a merged set of ontologies, called OntoGeonous. The encoding process identifies the objects of the semantic encoding, the geologic units, gathers the relevant information about such objects from authoritative resources, such as GeoSciML (giving priority to the application schemata reported in the INSPIRE Encoding Cookbook), and expresses the statements by means of axioms encoded in the Web Ontology Language (OWL). To support interoperability, OntoGeonous interlinks the general concepts by referring to the upper part level of ontology SWEET (developed by NASA), and imports knowledge that is already encoded in ontological format (e.g., ontology Simple Lithology). Machine-readable knowledge allows for consistency checking and for classification of the geological map data through algorithms of automatic reasoning.

Prediction of terrestrial gamma dose rate based on geological formations and soil types in the Johor State, Malaysia.

PubMed

Saleh, Muneer Aziz; Ramli, Ahmad Termizi; bin Hamzah, Khaidzir; Alajerami, Yasser; Moharib, Mohammed; Saeed, Ismael

2015-10-01

This study aims to predict and estimate unmeasured terrestrial gamma dose rate (TGDR) using statistical analysis methods to derive a model from the actual measurement based on geological formation and soil type. The measurements of TGDR were conducted in the state of Johor with a total of 3873 measured points which covered all geological formations, soil types and districts. The measurements were taken 1 m above the soil surface using NaI [Ti] detector. The measured gamma dose rates ranged from 9 nGy h(-1) to 1237 nGy h(-1) with a mean value of 151 nGy h(-1). The data have been normalized to fit a normal distribution. Tests of significance were conducted among all geological formations and soil types, using the unbalanced one way ANOVA. The results indicated strong significant differences due to the different geological formations and soil types present in Johor State. Pearson Correlation was used to measure the relations between gamma dose rate based on geological formation and soil type (D(G,S)) with the gamma dose rate based on geological formation (D(G)) or soil type (D(s)). A very good correlation was found between D(G,S) and D(G) or D(G,S) and D(s). A total of 118 pairs of geological formations and soil types were used to derive the statistical contribution of geological formations and soil types to gamma dose rates. The contribution of the gamma dose rate from geological formation and soil type were found to be 0.594 and 0.399, respectively. The null hypotheses were accepted for 83% of examined data, therefore, the model could be used to predict gamma dose rates based on geological formation and soil type information. Copyright © 2015 Elsevier Ltd. All rights reserved.

Elevations and distances in the United States

USGS Publications Warehouse

,

1991-01-01

The information in this booklet was compiled to answer inquiries received by the U.S. Geological Survey from students; teachers; writers; editors; publishers of encyclopedias, almanacs, and other reference books; and people in many other fields of work. The elevations of features and distances between points in the United States were determined from surveys and topographic maps of the U.S. Geological Survey or obtained from other sources. In most cases, the elevations were determined from surveys and from 1:24,000- and 1:25,000-scale, 7.5-minute topographic quadrangle maps. In Alaska, information was taken from 1:63,360-scale, 15-minute topographic quadrangle maps. In a few cases, data were obtained from older, 1:62,500-scale, 15-minute maps; these maps are being replaced with larger-scale 7.5-minute coverage. Further information about U.S. Geological Survey products can be obtained from: U.S. Geological Survey, Earth Science Information Center, 507 National Center, Reston, VA 22092 or phone 703-860-6045.

Southern California Earthquake Center Geologic Vertical Motion Database

NASA Astrophysics Data System (ADS)

Niemi, Nathan A.; Oskin, Michael; Rockwell, Thomas K.

2008-07-01

The Southern California Earthquake Center Geologic Vertical Motion Database (VMDB) integrates disparate sources of geologic uplift and subsidence data at 104- to 106-year time scales into a single resource for investigations of crustal deformation in southern California. Over 1800 vertical deformation rate data points in southern California and northern Baja California populate the database. Four mature data sets are now represented: marine terraces, incised river terraces, thermochronologic ages, and stratigraphic surfaces. An innovative architecture and interface of the VMDB exposes distinct data sets and reference frames, permitting user exploration of this complex data set and allowing user control over the assumptions applied to convert geologic and geochronologic information into absolute uplift rates. Online exploration and download tools are available through all common web browsers, allowing the distribution of vertical motion results as HTML tables, tab-delimited GIS-compatible text files, or via a map interface through the Google Maps™ web service. The VMDB represents a mature product for research of fault activity and elastic deformation of southern California.

Geologic database for digital geology of California, Nevada, and Utah: an application of the North American Data Model

USGS Publications Warehouse

Bedford, David R.; Ludington, Steve; Nutt, Constance M.; Stone, Paul A.; Miller, David M.; Miller, Robert J.; Wagner, David L.; Saucedo, George J.

2003-01-01

The USGS is creating an integrated national database for digital state geologic maps that includes stratigraphic, age, and lithologic information. The majority of the conterminous 48 states have digital geologic base maps available, often at scales of 1:500,000. This product is a prototype, and is intended to demonstrate the types of derivative maps that will be possible with the national integrated database. This database permits the creation of a number of types of maps via simple or sophisticated queries, maps that may be useful in a number of areas, including mineral-resource assessment, environmental assessment, and regional tectonic evolution. This database is distributed with three main parts: a Microsoft Access 2000 database containing geologic map attribute data, an Arc/Info (Environmental Systems Research Institute, Redlands, California) Export format file containing points representing designation of stratigraphic regions for the Geologic Map of Utah, and an ArcView 3.2 (Environmental Systems Research Institute, Redlands, California) project containing scripts and dialogs for performing a series of generalization and mineral resource queries. IMPORTANT NOTE: Spatial data for the respective stage geologic maps is not distributed with this report. The digital state geologic maps for the states involved in this report are separate products, and two of them are produced by individual state agencies, which may be legally and/or financially responsible for this data. However, the spatial datasets for maps discussed in this report are available to the public. Questions regarding the distribution, sale, and use of individual state geologic maps should be sent to the respective state agency. We do provide suggestions for obtaining and formatting the spatial data to make it compatible with data in this report. See section ‘Obtaining and Formatting Spatial Data’ in the PDF version of the report.

Aniakchak sockeye salmon investigations

USGS Publications Warehouse

Hamon, Troy R.; Pavey, Scott A.; Miller, Joe L.; Nielsen, Jennifer L.

2005-01-01

Aniakchak National Monument and Preserve provides unusual and dramatic landscapes shaped by numerous volcanic eruptions, a massive flood, enormous landslides, and ongoing geological change. The focal point of the monument is Aniakchak Caldera, a restless volcano that embodies the instability of the Alaska Peninsula. This geological instability creates a dynamic and challenging environment for the biological occupants of Aniakchak and unparalleled opportunities for scientists to measure the adaptability of organisms and ecosystems to change. The sockeye salmon (Oncorhynchus nerka) is one member of the Aniakchak ecosystem that has managed to adapt to geologic upheaval and is now thriving in the park. Aside from just surviving in the harsh environment, these salmon are also noteworthy for providing essential marinederived nutrients to plants and animals and as a source of food for historic and present day people in the region.

Eddy Covariance Method for CO2 Emission Measurements: CCS Applications, Principles, Instrumentation and Software

NASA Astrophysics Data System (ADS)

Burba, George; Madsen, Rod; Feese, Kristin

2013-04-01

The Eddy Covariance method is a micrometeorological technique for direct high-speed measurements of the transport of gases, heat, and momentum between the earth's surface and the atmosphere. Gas fluxes, emission and exchange rates are carefully characterized from single-point in-situ measurements using permanent or mobile towers, or moving platforms such as automobiles, helicopters, airplanes, etc. Since the early 1990s, this technique has been widely used by micrometeorologists across the globe for quantifying CO2 emission rates from various natural, urban and agricultural ecosystems [1,2], including areas of agricultural carbon sequestration. Presently, over 600 eddy covariance stations are in operation in over 120 countries. In the last 3-5 years, advancements in instrumentation and software have reached the point when they can be effectively used outside the area of micrometeorology, and can prove valuable for geological carbon capture and sequestration, landfill emission measurements, high-precision agriculture and other non-micrometeorological industrial and regulatory applications. In the field of geological carbon capture and sequestration, the magnitude of CO2 seepage fluxes depends on a variety of factors. Emerging projects utilize eddy covariance measurement to monitor large areas where CO2 may escape from the subsurface, to detect and quantify CO2 leakage, and to assure the efficiency of CO2 geological storage [3,4,5,6,7,8]. Although Eddy Covariance is one of the most direct and defensible ways to measure and calculate turbulent fluxes, the method is mathematically complex, and requires careful setup, execution and data processing tailor-fit to a specific site and a project. With this in mind, step-by-step instructions were created to introduce a novice to the conventional Eddy Covariance technique [9], and to assist in further understanding the method through more advanced references such as graduate-level textbooks, flux networks guidelines, journals and technical papers. A free open-source software package with a user-friendly interface was developed accordingly for computing final fully corrected CO2 emission numbers [10]. The presentation covers highlights of the eddy covariance method, its application to geological carbon sequestration, key requirements, instrumentation and software, and reviews educational resources particularly useful for carbon sequestration research. References: [1] Aubinet, M., T. Vesala, and D. Papale (Eds.), 2012. Eddy Covariance: A Practical Guide to Measurement and Data Analysis. Springer-Verlag, 442 pp. [2] Foken T., 2008. Micrometeorology. Springer-Verlag, 308 pp. [4] Finley, R., 2009. An Assessment of Geological Carbon Sequestration in the Illinois Basin Overview of the Decatur-Illinois Basin Site. MGSC, http://www.istc.illinois.edu/info/govs_awards_docs/2009-GSA-1100-Finley.pdf [5] Liu, G. (Ed.), 2012. Greenhouse Gases: Capturing, Utilization and Reduction. Intech, 338 pp. [6] LI-COR Biosciences, 2011. Surface Monitoring for Geologic Carbon Sequestration Monitoring: Methods, Instrumentation, and Case Studies. LI-COR Biosciences, Pub. 980-11916, 15 pp. [7] Benson, S., 2006. Monitoring carbon dioxide sequestration in deep geological formations for inventory verification and carbon credits, SPE-102833, Presentation [8] Lewicki, J., G. Hilley, M. Fischer, L. Pan, C. Olden-burg, C. Dobeck, and L. Spangler, 2009.Eddy covariance observations of leakage during shallow subsurface CO2 releases. Journal of Geophys Res, 114: D12302 [9] Burba, G., 2013. Eddy Covariance Method for Scientific, Industrial, Agricultural and Regulatory Applications. LI-COR Biosciences, 328 pp. [10] LI-COR Biosciences, 2012. EddyPro 4.0: Help and User's Guide. Lincoln, NE, 208 pp.

Quaternary Magmatism in the Cascades - Geologic Perspectives

USGS Publications Warehouse

Hildreth, Wes

2007-01-01

Foreward The Cascade magmatic arc is a belt of Quaternary volcanoes that extends 1,250 km from Lassen Peak in northern California to Meager Mountain in Canada, above the subduction zone where the Juan de Fuca Plate plunges beneath the North American Plate. This Professional Paper presents a synthesis of the entire volcanic arc, addressing all 2,300 known Quaternary volcanoes, not just the 30 or so visually prominent peaks that comprise the volcanic skyline. Study of Cascade volcanoes goes back to the geological explorers of the late 19th century and the seminal investigations of Howel Williams in the 1920s and 1930s. However, major progress and application of modern scientific methods and instrumentation began only in the 1970s with the advent of systematic geological, geophysical, and geochemical studies of the entire arc. Initial stimulus from the USGS Geothermal Research Program was enhanced by the USGS Volcano Hazards Program following the 1980 eruption of Mount St. Helens. Together, these two USGS Programs have provided more than three decades of stable funding, staffing, and analytical support. This Professional Paper summarizes the resultant USGS data sets and integrates them with the parallel contributions of other investigators. The product is based upon an all-encompassing and definitive geological database, including chemical and isotopic analyses to characterize the rocks and geochronology to provide the critical time constraints. Until now, this massive amount of data has not been summarized, and a systematic and uniform interpretation firmly grounded in geological fact has been lacking. Herein lies the primary utility of this Cascade volume. It not only will be the mandatory starting point for new workers, but also will provide essential geological context to broaden the perspectives of current investigators of specific Cascade volcanoes. Wes Hildreth's insightful understanding of volcanic processes and his uncompromising scientific integrity make him uniquely qualified to present this synthesis. During more than three decades of volcanological studies, he has carried out comprehensive investigations of Mount Adams, Mount Baker, the Three Sisters, and the Simcoe Mountains Volcanic Field. He also brings a broad experience in other volcanic arcs, having conducted integrated field and laboratory investigations at several major volcanic centers in the Andes and the Aleutian arcs. His expertise and perspective have been further enhanced by in-depth petrologic studies of caldera environments, primarily in Long Valley, California, and Yellowstone. On the basis of all these field and laboratory investigations and exhaustive literature searches, he has published three definitive petrologic syntheses addressing the passage and transformation of basaltic magmas from their mantle sources through the crust to form the many types of volcanic manifestations at the Earth's surface. A major strength of this Professional Paper is that it adheres to data first and foremost, and only then correlates these data with relevant theories. Petrological and geophysical interpretation is left to the later sections of the volume, and even there is never allowed to stray from the pertinent databases. Hildreth's interpretations are not just idle speculations, but are carefully reasoned inferences firmly based on his thorough evaluation of the observational geological data. Professional Paper 1744 should not be skimmed lightly, in the hope that the salient points will quickly rub off. Instead, every section, indeed every paragraph, presents scholarly observations and insightful interpretations that demand careful and thoughtful study. This volume will influence and guide the course of Cascade investigations for decades to come.

Estimating Divergence Dates and Substitution Rates in the Drosophila Phylogeny

PubMed Central

Obbard, Darren J.; Maclennan, John; Kim, Kang-Wook; Rambaut, Andrew; O’Grady, Patrick M.; Jiggins, Francis M.

2012-01-01

An absolute timescale for evolution is essential if we are to associate evolutionary phenomena, such as adaptation or speciation, with potential causes, such as geological activity or climatic change. Timescales in most phylogenetic studies use geologically dated fossils or phylogeographic events as calibration points, but more recently, it has also become possible to use experimentally derived estimates of the mutation rate as a proxy for substitution rates. The large radiation of drosophilid taxa endemic to the Hawaiian islands has provided multiple calibration points for the Drosophila phylogeny, thanks to the "conveyor belt" process by which this archipelago forms and is colonized by species. However, published date estimates for key nodes in the Drosophila phylogeny vary widely, and many are based on simplistic models of colonization and coalescence or on estimates of island age that are not current. In this study, we use new sequence data from seven species of Hawaiian Drosophila to examine a range of explicit coalescent models and estimate substitution rates. We use these rates, along with a published experimentally determined mutation rate, to date key events in drosophilid evolution. Surprisingly, our estimate for the date for the most recent common ancestor of the genus Drosophila based on mutation rate (25–40 Ma) is closer to being compatible with independent fossil-derived dates (20–50 Ma) than are most of the Hawaiian-calibration models and also has smaller uncertainty. We find that Hawaiian-calibrated dates are extremely sensitive to model choice and give rise to point estimates that range between 26 and 192 Ma, depending on the details of the model. Potential problems with the Hawaiian calibration may arise from systematic variation in the molecular clock due to the long generation time of Hawaiian Drosophila compared with other Drosophila and/or uncertainty in linking island formation dates with colonization dates. As either source of error will bias estimates of divergence time, we suggest mutation rate estimates be used until better models are available. PMID:22683811

NADM Conceptual Model 1.0 -- A Conceptual Model for Geologic Map Information

USGS Publications Warehouse

,

2004-01-01

Executive Summary -- The NADM Data Model Design Team was established in 1999 by the North American Geologic Map Data Model Steering Committee (NADMSC) with the purpose of drafting a geologic map data model for consideration as a standard for developing interoperable geologic map-centered databases by state, provincial, and federal geological surveys. The model is designed to be a technology-neutral conceptual model that can form the basis for a web-based interchange format using evolving information technology (e.g., XML, RDF, OWL), and guide implementation of geoscience databases in a common conceptual framework. The intended purpose is to allow geologic information sharing between geologic map data providers and users, independent of local information system implementation. The model emphasizes geoscience concepts and relationships related to information presented on geologic maps. Design has been guided by an informal requirements analysis, documentation of existing databases, technology developments, and other standardization efforts in the geoscience and computer-science communities. A key aspect of the model is the notion that representation of the conceptual framework (ontology) that underlies geologic map data must be part of the model, because this framework changes with time and understanding, and varies between information providers. The top level of the model distinguishes geologic concepts, geologic representation concepts, and metadata. The geologic representation part of the model provides a framework for representing the ontology that underlies geologic map data through a controlled vocabulary, and for establishing the relationships between this vocabulary and a geologic map visualization or portrayal. Top-level geologic classes in the model are Earth material (substance), geologic unit (parts of the Earth), geologic age, geologic structure, fossil, geologic process, geologic relation, and geologic event.

Mass Movement Susceptibility Mapping Using Satellite Optical Imagery Compared With INSAR Monitoring: Zigui County, Three Gorges Region, China

NASA Astrophysics Data System (ADS)

Kincal, Cem; Singleton, Andrew; Liu, Peng; Li, Zhenhong; Drummond, Jane; Hoey, Trevor; Muller, Jan-Peter; Qu, Wei; Zeng, Qiming; Zhang, Jingfa; Du, Peijun

2010-10-01

Mass movements on steep slopes are a major hazard to communities and infrastructure in the Three Gorges region, China. Developing susceptibility maps of mass movements is therefore very important in both current and future land use planning. This study employed satellite optical imagery and an ASTER GDEM (15 m) to derive various parameters (namely geology; slope gradient; proximity to drainage networks and proximity to lineaments) in order to create a GIS-based map of mass movement susceptibility. This map was then evaluated using highly accurate deformation signals processed using the Persistent Scatterer (PS) InSAR technique. Areas of high susceptibility correspond well to points of high subsidence, which provides a strong support of our susceptibility map.

The NASA environmental models of Mars

NASA Technical Reports Server (NTRS)

Kaplan, D. I.

1991-01-01

NASA environmental models are discussed with particular attention given to the Mars Global Reference Atmospheric Model (Mars-GRAM) and the Mars Terrain simulator. The Mars-GRAM model takes into account seasonal, diurnal, and surface topography and dust storm effects upon the atmosphere. It is also capable of simulating appropriate random density perturbations along any trajectory path through the atmosphere. The Mars Terrain Simulator is a software program that builds pseudo-Martian terrains by layering the effects of geological processes upon one another. Output pictures of the constructed surfaces can be viewed from any vantage point under any illumination conditions. Attention is also given to the document 'Environment of Mars, 1988' in which scientific models of the Martian atmosphere and Martian surface are presented.

A Pyramid Scheme for Constructing Geologic Maps on Geobrowsers

NASA Astrophysics Data System (ADS)

Whitmeyer, S. J.; de Paor, D. G.; Daniels, J.; Jeremy, N.; Michael, R.; Santangelo, B.

2008-12-01

Hundreds of geologic maps have been draped onto Google Earth (GE) using the ground overlay tag of Keyhole Markup Language (KML) and dozens have been published on academic and survey web pages as downloadable KML or KMZ (zipped KML) files. The vast majority of these are small KML docs that link to single, large - often very large - image files (jpegs, tiffs, etc.) Files that exceed 50 MB in size defeat the purpose of GE as an interactive and responsive, and therefore fast, virtual terrain medium. KML supports super-overlays (a.k.a. image pyramids), which break large graphic files into manageable tiles that load only when they are in the visible region at a sufficient level of detail (LOD), and several automatic tile-generating applications have been written. The process of exporting map data from applications such as ArcGIS® to KML format is becoming more manageable but still poses challenges. Complications arise, for example, because of differences between grid-north at a point on a map and true north at the equivalent location on the virtual globe. In our recent field season, we devised ways of overcoming many of these obstacles in order to generate responsive, panable, zoomable geologic maps in which data is layered in a pyramid structure similar to the image pyramid used for default GE terrain. The structure of our KML code for each level of the pyramid is self-similar: (i) check whether the current tile is in the visible region, (ii) if so, render the current overlay, (iii) add the current data level, and (iv) using four network links, check the visibility and LOD of four nested tiles. By using this pyramid structure we provide the user with access to geologic and map data at multiple levels of observation. For example, when the viewpoint is distant, regional structures and stratigraphy (e.g. lithological groups and terrane boundaries) are visible. As the user zooms to lower elevations, formations and ultimately individual outcrops come into focus. The pyramid structure is ideally suited to geologic data which tends to be unevenly exposed across the earth's surface.

Origins of Sinuous and Braided Channels on Ascraeus Mons, Mars - A Keck Geology Consortium Undergraduate Research Project

NASA Technical Reports Server (NTRS)

de Wet, A. P.; Bleacher, J. E.; Garry, W. B.

2012-01-01

Water has clearly played an important part in the geological evolution of Mars. There are many features on Mars that were almost certainly formed by fluvial processes -- for example, the channels Kasei Valles and Ares Vallis in the Chryse Planitia area of Mars are almost certainly fluvial features. On the other hand, there are many channel features that are much more difficult to interpret -- and have been variously attributed to volcanic and fluvial processes. Clearly unraveling the details of the role of water on Mars is extremely important, especially in the context of the search of extinct or extant life. In this project we built on our recent work in determining the origin of one channel on the southwest rift apron of Ascraeus Mons. This project, funded by the Keck Geology Consortium and involving 4 undergraduate geology majors took advantage of the recently available datasets to map and analyze similar features on Ascraeus Mons and some other areas of Mars. A clearer understanding of how these particular channel features formed might lead to the development of better criteria to distinguish how other Martian channel features formed. Ultimately this might provide us with a better understanding of the role of volcanic and fluvial processes in the geological evolution of Mars.

Influences of geomorphology and geology on alpine treeline in the American West - More important than climatic influences?

USGS Publications Warehouse

Butler, D.R.; Malanson, G.P.; Walsh, S.J.; Fagre, D.B.

2007-01-01

The spatial distribution and pattern of alpine treeline in the American West reflect the overarching influences of geological history, lithology and structure, and geomorphic processes and landforms, and geologic and geomorphic factors—both forms and processes—can control the spatiotemporal response of the ecotone to climate change. These influences occur at spatial scales ranging from the continental scale to fine scale processes and landforms at the slope scale. Past geomorphic influences, particularly Pleistocene glaciation, have also left their impact on treeline, and treelines across the west are still adjusting to post-Pleistocene conditions within Pleistocene-created landforms. Current fine scale processes include solifluction and changes on relict solifluction and digging by animals. These processes should be examined in detail in future studies to facilitate a better understanding of where individual tree seedlings become established as a primary response of the ecotone to climate change.

Publications - GMC 34 | Alaska Division of Geological & Geophysical Surveys

Science.gov Websites

DGGS GMC 34 Publication Details Title: Isotopic age dating of SOCAL Cape Espenberg #1 and Nimiuk Point for more information. Bibliographic Reference Denison, R.E., 1982, Isotopic age dating of SOCAL Cape

Publications - GMC 346 | Alaska Division of Geological & Geophysical

Science.gov Websites

'-4357.7') in Milne Point Unit SB #B-02 well Authors: Lowe, Steve, and Matthews, Susan Publication Date Bibliographic Reference Lowe, Steve, and Matthews, Susan, 2007, Palynological data package for cored Ugnu

Mercury in mosses Hylocomium splendens (Hedw.) B.S.G. and Pleurozium schreberi (Brid.) Mitt. from Poland and Alaska: Understanding the origin of pollution sources

USGS Publications Warehouse

Migaszewski, Z.M.; Galuszka, A.; Dole, ogonekgowska S.; Crock, J.G.; Lamothe, P.J.

2010-01-01

This report shows baseline concentrations of mercury in the moss species Hylocomium splendens and Pleurozium schreberi from the Kielce area and the remaining Holy Cross Mountains (HCM) region (south-central Poland), and Wrangell-Saint Elias National Park and Preserve (Alaska) and Denali National Park and Preserve (Alaska). Like mosses from many European countries, Polish mosses were distinctly elevated in Hg, bearing a signature of cross-border atmospheric transport combined with local point sources. In contrast, Alaskan mosses showed lower Hg levels, reflecting mostly the underlying geology. Compared to HCM, Alaskan and Kielce mosses exhibited more uneven spatial distribution patterns of Hg. This variation is linked to topography and location of local point sources (Kielce) and underlying geology (Alaska). Both H. splendens and P. schreberi showed similar bioaccumulative capabilities of Hg in all four study areas. ?? 2010 Elsevier Inc.

Three-Dimensional Geologic Map of the Hayward Fault Zone, San Francisco Bay Region, California

USGS Publications Warehouse

Phelps, G.A.; Graymer, R.W.; Jachens, R.C.; Ponce, D.A.; Simpson, R.W.; Wentworth, C.M.

2008-01-01

A three-dimensional (3D) geologic map of the Hayward Fault zone was created by integrating the results from geologic mapping, potential field geophysics, and seismology investigations. The map volume is 100 km long, 20 km wide, and extends to a depth of 12 km below sea level. The map volume is oriented northwest and is approximately bisected by the Hayward Fault. The complex geologic structure of the region makes it difficult to trace many geologic units into the subsurface. Therefore, the map units are generalized from 1:24,000-scale geologic maps. Descriptions of geologic units and structures are offered, along with a discussion of the methods used to map them and incorporate them into the 3D geologic map. The map spatial database and associated viewing software are provided. Elements of the map, such as individual fault surfaces, are also provided in a non-proprietary format so that the user can access the map via open-source software. The sheet accompanying this manuscript shows views taken from the 3D geologic map for the user to access. The 3D geologic map is designed as a multi-purpose resource for further geologic investigations and process modeling.

How to Make a Virtual Landscape with Outcrops for Use in Geoscience Teaching

NASA Astrophysics Data System (ADS)

Houghton, J.; Gordon, C.; Craven, B.; Robinson, A.; Lloyd, G. E. E.; Morgan, D. J.

2016-12-01

We are using screen-based virtual reality landscapes to augment the teaching of basic geological field skills and to enhance 3D visualisation skills. Here we focus on the processes of creating these landscapes, both imagined and real, in the Unity 3D game engine. The virtual landscapes are terrains with embedded data for mapping exercises, or draped geological maps for understanding the 3D interaction of the geology with the topography. The nature of the landscapes built depends on the learning outcomes of the intended teaching exercise. For example, a simple model of two hills and a valley over which to drape a series of different geological maps can be used to enhance the understanding of the 3D interaction of the geology with the topography. A more complex topography reflecting the underlying geology can be used for geological mapping exercises. The process starts with a contour image or DEM, which needs to be converted into RAW files to be imported into Unity. Within Unity itself, there are a series of steps needed to create a world around the terrain (the setting of cameras, lighting, skyboxes etc) before the terrain can be painted with vegetation and populated with assets or before a splatmap of the geology can be added. We discuss how additional features such as a GPS unit or compass can be included. We are also working to create landscapes based on real localities, both in response to the demand for greater realism and to support students unable to access the field due to health or mobility issues. This includes adding 3D photogrammetric images of outcrops into the worlds. This process uses the open source/freeware tools VisualSFM and MeshLab to create files suitable to be imported into Unity. This project is a collaboration between the University of Leeds and Leeds College of Art, UK, and all our virtual landscapes are freely available online at www.see.leeds.ac.uk/virtual-landscapes/.

A Geospatial Information Grid Framework for Geological Survey.

PubMed

Wu, Liang; Xue, Lei; Li, Chaoling; Lv, Xia; Chen, Zhanlong; Guo, Mingqiang; Xie, Zhong

2015-01-01

The use of digital information in geological fields is becoming very important. Thus, informatization in geological surveys should not stagnate as a result of the level of data accumulation. The integration and sharing of distributed, multi-source, heterogeneous geological information is an open problem in geological domains. Applications and services use geological spatial data with many features, including being cross-region and cross-domain and requiring real-time updating. As a result of these features, desktop and web-based geographic information systems (GISs) experience difficulties in meeting the demand for geological spatial information. To facilitate the real-time sharing of data and services in distributed environments, a GIS platform that is open, integrative, reconfigurable, reusable and elastic would represent an indispensable tool. The purpose of this paper is to develop a geological cloud-computing platform for integrating and sharing geological information based on a cloud architecture. Thus, the geological cloud-computing platform defines geological ontology semantics; designs a standard geological information framework and a standard resource integration model; builds a peer-to-peer node management mechanism; achieves the description, organization, discovery, computing and integration of the distributed resources; and provides the distributed spatial meta service, the spatial information catalog service, the multi-mode geological data service and the spatial data interoperation service. The geological survey information cloud-computing platform has been implemented, and based on the platform, some geological data services and geological processing services were developed. Furthermore, an iron mine resource forecast and an evaluation service is introduced in this paper.

A Geospatial Information Grid Framework for Geological Survey

PubMed Central

Wu, Liang; Xue, Lei; Li, Chaoling; Lv, Xia; Chen, Zhanlong; Guo, Mingqiang; Xie, Zhong

2015-01-01

The use of digital information in geological fields is becoming very important. Thus, informatization in geological surveys should not stagnate as a result of the level of data accumulation. The integration and sharing of distributed, multi-source, heterogeneous geological information is an open problem in geological domains. Applications and services use geological spatial data with many features, including being cross-region and cross-domain and requiring real-time updating. As a result of these features, desktop and web-based geographic information systems (GISs) experience difficulties in meeting the demand for geological spatial information. To facilitate the real-time sharing of data and services in distributed environments, a GIS platform that is open, integrative, reconfigurable, reusable and elastic would represent an indispensable tool. The purpose of this paper is to develop a geological cloud-computing platform for integrating and sharing geological information based on a cloud architecture. Thus, the geological cloud-computing platform defines geological ontology semantics; designs a standard geological information framework and a standard resource integration model; builds a peer-to-peer node management mechanism; achieves the description, organization, discovery, computing and integration of the distributed resources; and provides the distributed spatial meta service, the spatial information catalog service, the multi-mode geological data service and the spatial data interoperation service. The geological survey information cloud-computing platform has been implemented, and based on the platform, some geological data services and geological processing services were developed. Furthermore, an iron mine resource forecast and an evaluation service is introduced in this paper. PMID:26710255

Mathematical programming (MP) model to determine optimal transportation infrastructure for geologic CO2 storage in the Illinois basin

NASA Astrophysics Data System (ADS)

Rehmer, Donald E.

Analysis of results from a mathematical programming model were examined to 1) determine the least cost options for infrastructure development of geologic storage of CO2 in the Illinois Basin, and 2) perform an analysis of a number of CO2 emission tax and oil price scenarios in order to implement development of the least-cost pipeline networks for distribution of CO2. The model, using mixed integer programming, tested the hypothesis of whether viable EOR sequestration sites can serve as nodal points or hubs to expand the CO2 delivery infrastructure to more distal locations from the emissions sources. This is in contrast to previous model results based on a point-to- point model having direct pipeline segments from each CO2 capture site to each storage sink. There is literature on the spoke and hub problem that relates to airline scheduling as well as maritime shipping. A large-scale ship assignment problem that utilized integer linear programming was run on Excel Solver and described by Mourao et al., (2001). Other literature indicates that aircraft assignment in spoke and hub routes can also be achieved using integer linear programming (Daskin and Panayotopoulos, 1989; Hane et al., 1995). The distribution concept is basically the reverse of the "tree and branch" type (Rothfarb et al., 1970) gathering systems for oil and natural gas that industry has been developing for decades. Model results indicate that the inclusion of hubs as variables in the model yields lower transportation costs for geologic carbon dioxide storage over previous models of point-to-point infrastructure geometries. Tabular results and GIS maps of the selected scenarios illustrate that EOR sites can serve as nodal points or hubs for distribution of CO2 to distal oil field locations as well as deeper saline reservoirs. Revenue amounts and capture percentages both show an improvement over solutions when the hubs are not allowed to come into the solution. Other results indicate that geologic storage of CO2 into saline aquifers does not come into solutions selected by the model until the CO 2 emissions tax approaches 50/tonne. CO2 capture and storage begins to occur when the oil price is above 24.42 a barrel based on the constraints of the model. The annual storage capacity of the basin is nearly maximized when the net price of oil is as low as 40 per barrel and the CO2 emission tax is 60/tonne. The results from every subsequent scenario that was examined by this study demonstrate that EOR utilizing anthropogenically captured CO2 will earn net revenue, and thus represents an economically viable option for CO2 storage in the Illinois Basin.

Significant achievements in the planetary geology program

NASA Technical Reports Server (NTRS)

Head, J. W. (Editor)

1984-01-01

Recent developments in planetology research are summarized. Important developments are summarized in topics ranging from solar system evolution, comparative planetology, and geologic processes active on other planetary bodies, to techniques and instrument development for exploration.

Characterizing the Mineralogy of Potential Lunar Landing Sites

NASA Technical Reports Server (NTRS)

Pieters, Carle; Head, James W., III; Mustard, Jack; Boardman, Joe; Buratti, Bonnie; Clark, Roger; Green, Rob; Head, James W, III; McCord, Thomas B.; Mustard, Jack;

Controls on Mississippi Valley-Type Zn-Pb mineralization in Behabad district, Central Iran: Constraints from spatial and numerical analyses

NASA Astrophysics Data System (ADS)

Parsa, Mohammad; Maghsoudi, Abbas

2018-04-01

The Behabad district, located in the central Iranian microcontinent, contains numerous epigenetic stratabound carbonate-hosted Zn-Pb ore bodies. The mineralizations formed as fault, fracture and karst fillings in the Permian-Triassic formations, especially in Middle Triassic dolostones, and comprise mainly non-sulfides zinc ores. These are all interpreted as Mississippi Valley-type (MVT) base metal deposits. From an economic geological point of view, it is imperative to recognize the processes that have plausibly controlled the emplacement of MVT Zn-Pb mineralization in the Behabad district. To address the foregoing issue, analyses of the spatial distribution of mineral deposits comprising fry and fractal techniques and analysis of the spatial association of mineral deposits with geological features using distance distribution analysis were applied to assess the regional-scale processes that could have operated in the distribution of MVT Zn-Pb deposits in the district. The obtained results based on these analytical techniques show the main trends of the occurrences are NW-SE and NE-SW, which are parallel or subparallel to the major northwest and northeast trending faults, supporting the idea that these particular faults could have acted as the main conduits for transport of mineral-bearing fluids. The results of these analyses also suggest that Permian-Triassic brittle carbonate sedimentary rocks have served as the lithological controls on MVT mineralization in the Behabad district as they are spatially and temporally associated with mineralization.

Analysis of impact crater populations and the geochronology of planetary surfaces in the inner solar system

NASA Astrophysics Data System (ADS)

Fassett, Caleb I.

2016-10-01

Analyzing the density of impact craters on planetary surfaces is the only known technique for learning their ages remotely. As a result, crater statistics have been widely analyzed on the terrestrial planets, since the timing and rates of activity are critical to understanding geologic process and history. On the Moon, the samples obtained by the Apollo and Luna missions provide critical calibration points for cratering chronology. On Mercury, Venus, and Mars, there are no similarly firm anchors for cratering rates, but chronology models have been established by extrapolating from the lunar record or by estimating their impactor fluxes in other ways. This review provides a current perspective on crater population measurements and their chronological interpretation. Emphasis is placed on how ages derived from crater statistics may be contingent on assumptions that need to be considered critically. In addition, ages estimated from crater populations are somewhat different than ages from more familiar geochronology tools (e.g., radiometric dating). Resurfacing processes that remove craters from the observed population are particularly challenging to account for, since they can introduce geologic uncertainty into results or destroy information about the formation age of a surface. Regardless of these challenges, crater statistics measurements have resulted in successful predictions later verified by other techniques, including the age of the lunar maria, the existence of a period of heavy bombardment in the Moon's first billion years, and young volcanism on Mars.

Major occurrences and reservoir concepts of marine clathrate hydrates: Implications of field evidence

USGS Publications Warehouse

Booth, J.S.; Winters, W.J.; Dillon, William P.; Clennell, M.B.; Rowe, M.M.

1998-01-01

This paper is part of the special publication Gas hydrates: relevance to world margin stability and climatic change (eds J.P. Henriet and J. Mienert). Questions concerning clathrate hydrate as an energy resource, as a factor in modifying global climate and as a triggering mechanism for mass movements invite consideration of what factors promote hydrate concentration, and what the quintessential hydrate-rich sediment may be. Gas hydrate field data, although limited, provide a starting point for identifying the environments and processes that lead to more massive concentrations. Gas hydrate zones are up to 30 m thick and the vertical range of occurrence at a site may exceed 200 m. Zones typically occur more than 100m above the phase boundary. Thicker zones are overwhelmingly associated with structural features and tectonism, and often contain sand. It is unclear whether an apparent association between zone thickness and porosity represents a cause-and-effect relationship. The primary control on the thickness of a potential gas hydrate reservoir is the geological setting. Deep water and low geothermal gradients foster thick gas hydrate stability zones (GHSZs). The presence of faults, fractures, etc. can favour migration of gas-rich fluids. Geological processes, such as eustacy or subsidence, may alter the thickness of the GHSZ or affect hydrate concentratiion. Tectonic forces may promote injection of gas into the GHSZ. More porous and permeable sediment, as host sediment properties, increase storage capacity and fluid conductivity, and thus also enhance reservoir potential.

Geologic Map and Digital Data Base of the Almo Quadrangle and City of Rocks National Reserve, Cassia County, Idaho

USGS Publications Warehouse

Miller, David M.; Armstrong, Richard L.; Bedford, David R.; Davis, Marsha

2008-01-01

This geologic map describes the geology of the City of Rocks National Reserve and environs, located in the Albion Mountains of south-central Idaho. The most prominent geologic features of the Reserve are the spectacular rock spires that attracted visitors, beginning with commentary in the journals of travelers to California during the Gold Rush of 1849. The tectonic history is outlined, and descriptions of landscape processes, a newly discovered Quaternary fault, and features of the pinnacles are presented.

The facts on file. Dictionary of geology and geophysics

DOE Office of Scientific and Technical Information (OSTI.GOV)

Lapidus, D.F.; Coates, D.R.

1987-01-01

This reference to the basic vocabulary of geology and geophysics has more than 3,000 clear and concise entries defining the entire range of geological phenomena. This book covers such areas as types of rocks and rock formations, deformation processes such as erosion and plate tectonics, volcanoes, glaciers and their effects on topography, geodesy and survey methods, earthquakes and seismology, fuels and mineral deposits.

Publications of the Western Earth Surfaces Processes Team 2005

USGS Publications Warehouse

Powell, Charles; Stone, Paul

2007-01-01

Introduction The Western Earth Surface Processes Team (WESPT) of the U.S. Geological Survey (USGS) conducts geologic mapping, earth-surface process investigations, and related topical earth science studies in the western United States. This work is focused on areas where modern geologic maps and associated earth-science data are needed to address key societal and environmental issues such as ground-water quality, landslides and other potential geologic hazards, and land-use decisions. Areas of primary emphasis in 2005 included southern California, the San Francisco Bay region, the Mojave Desert, the Colorado Plateau region of northern Arizona, and the Pacific Northwest. The team has its headquarters in Menlo Park, California, and maintains smaller field offices at several other locations in the western United States. The results of research conducted by the WESPT are released to the public as a variety of databases, maps, text reports, and abstracts, both through the internal publication system of the USGS and in diverse external publications such as scientific journals and books. This report lists publications of the WESPT released in 2005 as well as additional 2002, 2003, and 2004 publications that were not included in the previous lists (USGS Open-File Reports 03-363, 2004- 1267, 2005-1362). Most of the publications listed were authored or coauthored by WESPT staff. The list also includes some publications authored by non-USGS cooperators with the WESPT, as well as some authored by USGS staff outside the WESPT in cooperation with WESPT projects. Several of the publications listed are available on the World Wide Web; for these, URL addresses are provided. Many of these web publications are USGS Open-File reports that contain large digital databases of geologic map and related information. Information on ordering USGS publications can be found on the World Wide Web at http://www.usgs.gov/pubprod/, or by calling 1-888-ASK-USGS. The U.S. Geological Survey's web server for geologic information in the western United States is located at http://geology.wr.usgs.gov/. More information is available about the WESPT is available on-line at http://geology.wr.usgs.gov/wgmt.

Cooperative Educational Project - The Southern Appalachians: A Changing World

NASA Astrophysics Data System (ADS)

Clark, S.; Back, J.; Tubiolo, A.; Romanaux, E.

2001-12-01

The Southern Appalachian Mountains, a popular recreation area known for its beauty and rich biodiversity, was chosen by the U.S. Geological Survey as the site to produce a video, booklet, and teachers guide to explain basic geologic principles and how long-term geologic processes affect landscapes, ecosystems, and the quality of human life. The video was produced in cooperation with the National Park Service and has benefited from the advice of the Southern Appalachian Man and Biosphere Cooperative, a group of 11 Federal and three State agencies that works to promote the environmental health, stewardship, and sustainable development of the resources of the region. Much of the information in the video is included in the booklet. A teachers guide provides supporting activities that teachers may use to reinforce the concepts presented in the video and booklet. Although the Southern Appalachians include some of the most visited recreation areas in the country, few are aware of the geologic underpinnings that have contributed to the beauty, biological diversity, and quality of human life in the region. The video includes several animated segments that show paleogeographic reconstructions of the Earth and movements of the North American continent over time; the formation of the Ocoee sedimentary basin beginning about 750 million years ago; the collision of the North American and African continents about 270 million years ago; the formation of granites and similar rocks, faults, and geologic windows; and the extent of glaciation in North America. The animated segments are tied to familiar public-access localities in the region. They illustrate geologic processes and time periods, making the geologic setting of the region more understandable to tourists and local students. The video reinforces the concept that understanding geologic processes and settings is an important component of informed land management to sustain the quality of life in a region. The video and a teachers guide will be distributed by the Southern Appalachian Man and Biosphere to local middle and high schools, libraries, and visitors centers in the region. It will be distributed by the U.S. Geological Survey and sold in Park Service and Forest Service gift shops in the region.

Surficial geology mapping of the Arctic Ocean: using subbottom profiling and multibeam echosounding data sets to constrain the subsea north of 64° as a layer for the IBCAO

NASA Astrophysics Data System (ADS)

Mosher, D. C.; Baldwin, K.; Gebhardt, C.

2016-12-01

Barriers to data collection such as perennial ice cover, climate, and remoteness have contributed to a paucity of geologic data in the Arctic. The last decade, however, has seen a multi-national push to increase the quantity and extent of data available at high latitudes. With increased availability of geophysical and geological data holdings, we expand on previous mapping initiatives by creating a comprehensive surficial geology map as a layer to the International Bathymetric Chart of the Arctic Ocean (IBCAO), providing a way to collectively analyze physiography, morphology and geology. Acoustic facies derived from subbottom profiles, combined with morphology illuminated from IBCAO and multibeam bathymetric datasets, and ground truth data compiled from cores and samples are used to map surficial geology units. We identified over 25 seismo-acoustic facies leading to interpretation of 12 distinct geologic units for the Arctic Ocean. The largest variety of seismic facies occurs on the shelves, which demonstrate the complex ice-margin history (e.g. chaotic bottom echoes with amorphous subbottom reflections that imply ice scouring processes). Shelf-crossing troughs generally lead to trough mouth fans on the continental margin with characteristic glaciogenic debris flow deposits (acoustically transparent units) comprising the bulk of the sedimentary succession. Other areas of continental slopes show a variety of facies suggesting sediment mass failure and turbidite deposition. Vast areas of the deep water portion of the Arctic are dominated by parallel reflections, indicative of hemi-pelagic and turbidity current deposition. Some deep water parts of the basin, however, show evidence of current reworking (sigmoidal reflections within bedforms), and contain deep sea channels with thalwegs (bright reflections within channels) and levee deposits (reflection pinch-out). These results delineated in the surficial geology map provide a comprehensive database of regional geologic information of the Arctic Ocean that can be applied to a variety of disciplines, including the study of Arctic sedimentary processes, climatologic and oceanographic processes, environmental and geohazard risk assessment, resource management, and Extended Continental Shelf mapping.

Low-Centred Polygons and Alas-Like Basins as Geological Markers of Warming Trends Late in Mars' History

NASA Astrophysics Data System (ADS)

Soare, R. J.; Conway, S. J.; Godin, E.; Osinski, G.; Hawkswell, J.; Bina, A.

2017-12-01

Expansive assemblages of low/high centred (ice-wedge) polygons and (polygonised) flat-floored thermokarst-basins (alases) are ubiquitous on Earth where the permafrost is continuous, metres to decametres-thick and ice rich, i.e. the Tuktoyaktuk Coastlands of northern Canada and the Yamal Peninsula of eastern Russia. These assemblages are geological bellwethers of transient and on occasion, long-term rises of sub-aerial and thaw-generating mean temperatures, for two principal reasons. First, high-centred (ice-wedge) polygons evolve from low-centred (ice-wedge) polygons when ice wedges that have aggraded and uplift overlying sediments above the elevation datum at the polygon centres, degrade, by thaw, and induce the loss of elevation below that datum. Second, thermokarst terrain comprises sediments whose pore volume is exceeded by the presence of water ice. A thermokarst basin (an alas) forms if and only when this ice undergoes thermal destabilisation and where thaw-generated meltwater is lost by evaporation or drainage. Spatially-associated and morphologically-similar assemblages of polygons and basins are commonplace throughout the mid-latitudes of eastern Utopia Planitia (UP), Mars. Under current conditions of extreme aridity, low atmospheric-pressure and frigid mean-temperatures, the widespread formation of ice-rich terrain by freeze-thaw cycling, let alone of near-surface ice-wedges and/or thermokarst basins, seems implausible. Against this environmental backdrop, sublimation seemingly stands alone in being able to revise ice-rich landscapes. However, multiple strands of data point to the possible periglacial-assemblages (PPAs) being youthful but not current in their formation. First, the sub-regional and dark-toned terrain incised by the PPAs is cratered more densely than would be expected. Second, the PPAs reside at a lower relative and absolute elevation than a light-toned and region-wide latitude-dependent mantle that is generally thought to be very recent in origin. These strands and others point to a earlier period in the geological history of UP, perhaps in conjunction with shifts in obliquity and eccentricity, when liquid-water would have been stable enough to sustain freeze-thaw cycling, wet periglacial processes and, derivatively, the development of the PPAs.

Environmental geology and hydrology

NASA Astrophysics Data System (ADS)

Nakić, Zoran; Mileusnić, Marta; Pavlić, Krešimir; Kovač, Zoran

2017-10-01

Environmental geology is scientific discipline dealing with the interactions between humans and the geologic environment. Many natural hazards, which have great impact on humans and their environment, are caused by geological settings. On the other hand, human activities have great impact on the physical environment, especially in the last decades due to dramatic human population growth. Natural disasters often hit densely populated areas causing tremendous death toll and material damage. Demand for resources enhanced remarkably, as well as waste production. Exploitation of mineral resources deteriorate huge areas of land, produce enormous mine waste and pollute soil, water and air. Environmental geology is a broad discipline and only selected themes will be presented in the following subchapters: (1) floods as natural hazard, (2) water as geological resource and (3) the mining and mineral processing as types of human activities dealing with geological materials that affect the environment and human health.

How semantics can inform the geological mapping process and support intelligent queries

NASA Astrophysics Data System (ADS)

Lombardo, Vincenzo; Piana, Fabrizio; Mimmo, Dario

2017-04-01

The geologic mapping process requires the organization of data according to the general knowledge about the objects, namely the geologic units, and to the objectives of a graphic representation of such objects in a map, following an established model of geotectonic evolution. Semantics can greatly help such a process in two concerns: the provision of a terminological base to name and classify the objects of the map; on the other, the implementation of a machine-readable encoding of the geologic knowledge base supports the application of reasoning mechanisms and the derivation of novel properties and relations about the objects of the map. The OntoGeonous initiative has built a terminological base of geological knowledge in a machine-readable format, following the Semantic Web tenets and the Linked Data paradigm. The major knowledge sources of the OntoGeonous initiative are GeoScience Markup Language schemata and vocabularies (through its last version, GeoSciML 4, 2015, published by the IUGS CGI Commission) and the INSPIRE "Data Specification on Geology" directives (an operative simplification of GeoSciML, published by INSPIRE Thematic Working Group Geology of the European Commission). The Linked Data paradigm has been exploited by linking (without replicating, to avoid inconsistencies) the already existing machine-readable encoding for some specific domains, such as the lithology domain (vocabulary Simple Lithology) and the geochronologic time scale (ontology "gts"). Finally, for the upper level knowledge, shared across several geologic domains, we have resorted to NASA SWEET ontology. The OntoGeonous initiative has also produced a wiki that explains how the geologic knowledge has been encoded from shared geoscience vocabularies (https://www.di.unito.it/wikigeo/). In particular, the sections dedicated to axiomatization will support the construction of an appropriate data base schema that can be then filled with the objects of the map. This contribution will discuss how the formal encoding of the geological knowledge opens new perspectives for the analysis and representation of the geological systems. In fact, once that the major concepts are defined, the resulting formal conceptual model of the geologic system can hold across different technical and scientific communities. Furthermore, this would allow for a semi-automatic or automatic classification of the cartographic database, where a significant number of properties (attributes) of the recorded instances could be inferred through computational reasoning. So, for example, the system can be queried for showing the instances that satisfy some property (e.g., "Retrieve all the lithostratigraphic units composed of clastic sedimentary rock") or for classifying some unit according to the properties holding for that unit (e.g., "What is the class of the geologic unit composed of siltstone material?").

Geologic guide to the island of Hawaii: A field guide for comparative planetary geology

NASA Technical Reports Server (NTRS)

Greeley, R. (Editor)

1974-01-01

With geological data available for all inner planets except Venus, we are entering an era of true comparative planetary geology, when knowledge of the differences and similarities for classes of structures (e.g., shield volcanoes) will lead to a better understanding of general geological processes, regardless of planet. Thus, it is imperative that planetologists, particularly those involved in geological mapping and surface feature analysis for terrestrial planets, be familiar with volcanic terrain in terms of its origin, structure, and morphology. One means of gaining this experience is through field trips in volcanic terrains - hence, the Planetology Conference in Hawaii. In addition, discussions with volcanologists at the conference provide an important basis for establishing communications between the two fields that will facilitate comparative studies as more data become available.

National Oceanic and Atmospheric Administration hydrographic survey data used in a U.S. Geological Survey regional geologic framework study along the Delmarva Peninsula

USGS Publications Warehouse

Pendleton, Elizabeth A.; Brothers, Laura L.; Thieler, E. Robert; Danforth, William W.; Parker, Castle E.

2014-01-01

The U.S. Geological Survey obtained raw Reson multibeam data files from Science Applications International Corporation and the National Oceanic and Atmospheric Administration for 20 hydrographic surveys and extracted backscatter data using the Fledermaus Geocoder Toolbox from Quality Positioning Service. The backscatter mosaics produced by the U.S. Geological Survey for the inner continental shelf of the Delmarva Peninsula using National Oceanic and Atmospheric Administration data increased regional geophysical surveying efficiency, collaboration among government agencies, and the area over which geologic data can be interpreted by the U.S. Geological Survey. This report describes the methods by which the backscatter data were extracted and processed and includes backscatter mosaics and interpolated bathymetric surfaces.

GIS data models for coal geology

DOE Office of Scientific and Technical Information (OSTI.GOV)

McColloch, G.H. Jr.; Timberlake, K.J.; Oldham, A.V.

A variety of spatial data models can be applied to different aspects of coal geology. The simple vector data models found in various Computer Aided Drafting (CAD) programs are sometimes used for routine mapping and some simple analyses. However, more sophisticated applications that maintain the topological relationships between cartographic elements enhance analytical potential. Also, vector data models are best for producing various types of high quality, conventional maps. The raster data model is generally considered best for representing data that varies continuously over a geographic area, such as the thickness of a coal bed. Information is lost when contour linesmore » are threaded through raster grids for display, so volumes and tonnages are more accurately determined by working directly with raster data. Raster models are especially well suited to computationally simple surface-to-surface analysis, or overlay functions. Another data model, triangulated irregular networks (TINs) are superior at portraying visible surfaces because many TIN programs support break fines. Break lines locate sharp breaks in slope such as those generated by bodies of water or ridge crests. TINs also {open_quotes}honor{close_quotes} data points so that a surface generated from a set of points will be forced to pass through those points. TINs or grids generated from TINs, are particularly good at determining the intersections of surfaces such as coal seam outcrops and geologic unit boundaries. No single technique works best for all coal-related applications. The ability to use a variety of data models, and transform from one model to another is essential for obtaining optimum results in a timely manner.« less

Remote sensing and GIS-based prediction and assessment of copper-gold resources in Thailand

NASA Astrophysics Data System (ADS)

Yang, Shasha; Wang, Gongwen; Du, Wenhui; Huang, Luxiong

2014-03-01

Quantitative integration of geological information is a frontier and hotspot of prospecting decision research in the world. The forming process of large scale Cu-Au deposits is influenced by complicated geological events and restricted by various geological factors (stratum, structure and alteration). In this paper, using Thailand's copper-gold deposit district as a case study, geological anomaly theory is used along with the typical copper and gold metallogenic model, ETM+ remote sensing images, geological maps and mineral geology database in study area are combined with GIS technique. These techniques create ore-forming information such as geological information (strata, line-ring faults, intrusion), remote sensing information (hydroxyl alteration, iron alteration, linear-ring structure) and the Cu-Au prospect targets. These targets were identified using weights of evidence model. The research results show that the remote sensing and geological data can be combined to quickly predict and assess for exploration of mineral resources in a regional metallogenic belt.

3D Geological Model for "LUSI" - a Deep Geothermal System

NASA Astrophysics Data System (ADS)

Sohrabi, Reza; Jansen, Gunnar; Mazzini, Adriano; Galvan, Boris; Miller, Stephen A.

2016-04-01

Geothermal applications require the correct simulation of flow and heat transport processes in porous media, and many of these media, like deep volcanic hydrothermal systems, host a certain degree of fracturing. This work aims to understand the heat and fluid transport within a new-born sedimentary hosted geothermal system, termed Lusi, that began erupting in 2006 in East Java, Indonesia. Our goal is to develop conceptual and numerical models capable of simulating multiphase flow within large-scale fractured reservoirs such as the Lusi region, with fractures of arbitrary size, orientation and shape. Additionally, these models can also address a number of other applications, including Enhanced Geothermal Systems (EGS), CO2 sequestration (Carbon Capture and Storage CCS), and nuclear waste isolation. Fractured systems are ubiquitous, with a wide-range of lengths and scales, making difficult the development of a general model that can easily handle this complexity. We are developing a flexible continuum approach with an efficient, accurate numerical simulator based on an appropriate 3D geological model representing the structure of the deep geothermal reservoir. Using previous studies, borehole information and seismic data obtained in the framework of the Lusi Lab project (ERC grant n°308126), we present here the first 3D geological model of Lusi. This model is calculated using implicit 3D potential field or multi-potential fields, depending on the geological context and complexity. This method is based on geological pile containing the geological history of the area and relationship between geological bodies allowing automatic computation of intersections and volume reconstruction. Based on the 3D geological model, we developed a new mesh algorithm to create hexahedral octree meshes to transfer the structural geological information for 3D numerical simulations to quantify Thermal-Hydraulic-Mechanical-Chemical (THMC) physical processes.

Remotely sensed geology from lander-based to orbital perspectives: Results of FIDO rover May 2000 field tests

USGS Publications Warehouse

Jolliff, B.; Knoll, A.; Morris, R.V.; Moersch, J.; McSween, H.; Gilmore, M.; Arvidson, R.; Greeley, R.; Herkenhoff, K.; Squyres, S.

2002-01-01

Blind field tests of the Field Integration Design and Operations (FIDO) prototype Mars rover were carried out 7-16 May 2000. A Core Operations Team (COT), sequestered at the Jet Propulsion Laboratory without knowledge of test site location, prepared command sequences and interpreted data acquired by the rover. Instrument sensors included a stereo panoramic camera, navigational and hazard-avoidance cameras, a color microscopic imager, an infrared point spectrometer, and a rock coring drill. The COT designed command sequences, which were relayed by satellite uplink to the rover, and evaluated instrument data. Using aerial photos and Airborne Visible and Infrared Imaging Spectrometer (AVIRIS) data, and information from the rover sensors, the COT inferred the geology of the landing site during the 18 sol mission, including lithologic diversity, stratigraphic relationships, environments of deposition, and weathering characteristics. Prominent lithologic units were interpreted to be dolomite-bearing rocks, kaolinite-bearing altered felsic volcanic materials, and basalt. The color panoramic camera revealed sedimentary layering and rock textures, and geologic relationships seen in rock exposures. The infrared point spectrometer permitted identification of prominent carbonate and kaolinite spectral features and permitted correlations to outcrops that could not be reached by the rover. The color microscopic imager revealed fine-scale rock textures, soil components, and results of coring experiments. Test results show that close-up interrogation of rocks is essential to investigations of geologic environments and that observations must include scales ranging from individual boulders and outcrops (microscopic, macroscopic) to orbital remote sensing, with sufficient intermediate steps (descent images) to connect in situ and remote observations.

Evaluation of the airborne visible-infrared imaging spectrometer for mapping subtle lithological variation

NASA Technical Reports Server (NTRS)

Kruse, Fred A.

1990-01-01

The Airborne Visible/Infrared Imaging Spectrometer (AVIRIS), flown aboard the NASA ER-2 aircraft in 1987 and 1989, used four linear arrays and four individual spectrometers to collect data simultaneously from the 224 bands in a scanned 614 pixel-wide swath perpendicular to the aircraft direction. The research had two goals. One was to evaluate the AVIRIS data. The other was to look at the subtle lithological variation at the two test sites to develop a better understanding of the regional geology and surficial processes. The geometric characteristics of the data, adequacy of the spatial resolution, and adequacy of the spectral sampling interval are evaluated. Geologic differences at the test sites were mapped. They included lithological variation caused by primary sedimentary layering, facies variation, and weathering; and subtle mineralogical differences caused by hydrothermal alterations of igneous and sedimentary rocks. The investigation used laboratory, field, and aircraft spectral measurements; known properties of geological materials; digital image processing and spectrum processing techniques; and field geologic data to evaluate the selected characteristics of the AVIRIS data.

Geologic Mapping along the Arabia Terra Dichotomy Boundary: Mawrth Vallis and Nili Fossae, Mars: Introductory Report

NASA Technical Reports Server (NTRS)

Bleamaster, Leslie F., III; Crown, David A.

2008-01-01

Geologic mapping studies at the 1:1M-scale will be used to characterize geologic processes that have shaped the highlands along the Arabia Terra dichotomy boundary. In particular, this mapping will evaluate the distribution, stratigraphic position, and lateral continuity of compositionally distinct outcrops in Mawrth Vallis and Nili Fossae as identified by spectral instruments currently in orbit. Placing these landscapes, their material units, structural features, and unique compositional outcrops into spatial and temporal context with the remainder of the Arabia Terra dichotomy boundary will provide the ability to: 1) further test original dichotomy formation hypotheses, 2) constrain ancient paleoenvironments and climate conditions, and 3) evaluate various fluvial-nival modification processes related to past and present volatile distribution and their putative reservoirs (aquifers, lakes and oceans, surface and ground ice) and the influences of nearby volcanic and tectonic features on hydrologic processes in these regions. The result will be two 1:1M scale geologic maps of twelve MTM quadrangles (Mawrth Vallis - 20022, 20017, 20012, 25022, 25017, and 25012; and Nili Fossae - 20287, 20282, 25287, 25282, 30287, 30282).

Geologic Mapping along the Arabia Terra Dichotomy Boundary: Mawrth Vallis and Nili Fossae, Mars

NASA Technical Reports Server (NTRS)

Bleamaster, Leslie F., III; Crown, David A.

2009-01-01

Geologic mapping studies at the 1:1M-scale are being used to assess geologic materials and processes that shape the highlands along the Arabia Terra dichotomy boundary. In particular, this mapping will evaluate the distribution, stratigraphic position, and lateral continuity of compositionally distinct outcrops in Mawrth Vallis and Nili Fossae as identified by spectral instruments currently in orbit. Placing these landscapes, their material units, structural features, and unique compositional outcrops into spatial and temporal context with the remainder of the Arabia Terra dichotomy boundary may provide constraints on: 1) origin of the dichotomy boundary, 2) paleo-environments and climate conditions, and 3) various fluvial-nival modification processes related to past and present volatile distribution and their putative reservoirs (aquifers, lakes and oceans, surface and ground ice) and the influences of nearby volcanic and tectonic features on hydrologic processes in these regions. The results of this work will include two 1:1M scale geologic maps of twelve MTM quadrangles (Mawrth Vallis - 20022, 20017, 20012, 25022, 25017, and 25012; and Nili Fossae - 20287, 20282, 25287, 25282, 30287, 30282).

DOE Office of Scientific and Technical Information (OSTI.GOV)

Jung, Haeryong; Lee, Eunyong; Jeong, YiYeong

Korea Radioactive-waste Management Corporation (KRMC) established in 2009 has started a new project to collect information on long-term stability of deep geological environments on the Korean Peninsula. The information has been built up in the integrated natural barrier database system available on web (www.deepgeodisposal.kr). The database system also includes socially and economically important information, such as land use, mining area, natural conservation area, population density, and industrial complex, because some of this information is used as exclusionary criteria during the site selection process for a deep geological repository for safe and secure containment and isolation of spent nuclear fuel andmore » other long-lived radioactive waste in Korea. Although the official site selection process has not been started yet in Korea, current integrated natural barrier database system and socio-economic database is believed that the database system will be effectively utilized to narrow down the number of sites where future investigation is most promising in the site selection process for a deep geological repository and to enhance public acceptance by providing readily-available relevant scientific information on deep geological environments in Korea. (authors)« less

Europa: Processes and Habitability

NASA Technical Reports Server (NTRS)

Pappalardo, Robert T.

2006-01-01

This viewgraph presentation reviews the known and possible geologic processes of Europa. It shows slides of Europa, with different terrains (ridged plains and molten plains), and a possible view of the interior. Europa's eccentric orbit is reviewed. The presentation also reviews Europa's composition. The possible reasons for Europa's geology are reviewed. Also the possiblity that life exists on Europa is raised. The planned Europa Geophysical Explorer mission is also reviewed.

The role of impact cratering in planetary environmental change and implications for the search for life in the solar system (Invited)

NASA Astrophysics Data System (ADS)

Osinski, G. R.

2013-12-01

Beginning in the late 18th century with the work of James Hutton, uniformitarianism emerged as a central tenet of the natural sciences and remained so well into the 20th century. Central to the idea of uniformitarianism is the concept of gradualism whereby processes throughout time occur at the same, or similar rates. In the 20th century, the idea that asteroids and comets have struck, and continue to strike, planetary bodies throughout geological time, has revolutionized our understanding of Solar System history and evolution. Indeed, it is now widely recognized that impact cratering is one of the most important and fundamental geological process in the Solar System. It is also now apparent that impact events have profoundly affected the origin and evolution of Earth, its environment, and the habitability of our planet. The extreme physical conditions (e.g., 10's of thousands of K and 100's of GPa), the concentrated nature of the energy release at a single point on a planetary surface, and the virtually instantaneous nature of the impact process sets apart impact events from all other geological processes. It should not be surprising then that such a rapid geological process can cause rapid environmental change. The destructive geological, environmental, and biological effects of meteorite impact events are well studied and well known. This is largely due to the discovery of the ~180 km diameter Chicxulub impact structure, Mexico, and its link to the mass extinction event that marks the end of the Cretaceous Period 65 Myr. ago. While the main driver for this mass extinction event remains debated, a long list of possible causes of environmental change have been proposed, including: heat from the impact explosion, tsunamis, earthquakes, global forest fires, dust injection in the upper atmosphere, production of vast quantities of N2O, and release of CO2 and sulfur species from the target rocks. Any one of these effects could potentially cause the annihilation of a particular planetary habitat. But the news is not all bad. Impact events can redistribute viable planetary habitats instantly - and regionally to globally depending on the size of the impact event. They can bring material from depths of many km in the form of ejecta deposits and central uplifts in so-called complex impact structures. Importantly, much of the material excavated and/or redistributed by impact events is shocked to such low pressures and temperatures that habitats, bioessential elements (e.g., C, N, O), and even organisms can remain intact. In recent years, it has also become apparent that impact events can also create new planetary habitats where none previously existed, including hydrothermal systems, endolithic habitats in shocked rocks and impact glasses, and impact crater lakes. Finally, impact events can also generate conditions conducive for the origin of life (e.g., clays, which form catalysts for organic reactions, and hot spring environments). Thus, far from being the agents of destruction that they were once thought to be, impact events can also be viewed as a favourable agent of rapid environmental change. This may have important implications for our understanding of the origin and evolution of early life on Earth, and possibly other planets such as Mars.

Uncertainty in training image-based inversion of hydraulic head data constrained to ERT data: Workflow and case study

NASA Astrophysics Data System (ADS)

Hermans, Thomas; Nguyen, Frédéric; Caers, Jef

2015-07-01

In inverse problems, investigating uncertainty in the posterior distribution of model parameters is as important as matching data. In recent years, most efforts have focused on techniques to sample the posterior distribution with reasonable computational costs. Within a Bayesian context, this posterior depends on the prior distribution. However, most of the studies ignore modeling the prior with realistic geological uncertainty. In this paper, we propose a workflow inspired by a Popper-Bayes philosophy that data should first be used to falsify models, then only be considered for matching. We propose a workflow consisting of three steps: (1) in defining the prior, we interpret multiple alternative geological scenarios from literature (architecture of facies) and site-specific data (proportions of facies). Prior spatial uncertainty is modeled using multiple-point geostatistics, where each scenario is defined using a training image. (2) We validate these prior geological scenarios by simulating electrical resistivity tomography (ERT) data on realizations of each scenario and comparing them to field ERT in a lower dimensional space. In this second step, the idea is to probabilistically falsify scenarios with ERT, meaning that scenarios which are incompatible receive an updated probability of zero while compatible scenarios receive a nonzero updated belief. (3) We constrain the hydrogeological model with hydraulic head and ERT using a stochastic search method. The workflow is applied to a synthetic and a field case studies in an alluvial aquifer. This study highlights the importance of considering and estimating prior uncertainty (without data) through a process of probabilistic falsification.

Textural analysis of marine sediments at the USGS Woods Hole Science Center; methodology and data on DVD

USGS Publications Warehouse

Poppe, Lawrence J.; Williams, S. Jeffress; Paskevich, Valerie F.

2006-01-01

Marine sediments off the eastern United States vary markedly in texture (i.e., the size, shape, composition, and arrangement of their grains) due to a complex geologic history. For descriptive purposes, however, it is typically most useful to classify these sediments according to their grain-size distributions. In 1962, the U.S. Geological Survey began a program to study the marine geology of the continental margin off the Atlantic coast of the United States. As part of this program and numerous subsequent projects, thousands of sediment grab samples and cores were collected and analyzed for grain size at the Woods Hole Science Center. USGS Open-File Report 2005-1001 (Poppe et al., 2005), available on DVD and online, describes the field methods used to collect marine sediment samples as well as the laboratory methods used to determine and characterize grain-size distributions, and presents these data in several formats that can be readily employed by interested parties. The report is divided into three sections. The first section discusses procedures and contains pictures of the equipment, analytical flow diagrams, video clips with voice commentary, classification schemes, useful forms and compiled and uncompiled versions of the data-acquisition and data-processing software with documentation. The second section contains the grain-size data for more than 23,000 analyses in two “flat-file” formats, a data dictionary, and color-coded browse maps. The third section provides a GIS data catalog of the available point, interpretive, and baseline data layers, with FGDC-compliant metadata to help users visualize the textural information in a geographic context.

Candidate Landing Site for the Mars Science Laboratory: Vernal Crater, S.W. ARabia Terra

NASA Technical Reports Server (NTRS)

Paris, K. N.; Allen, C. C.; Oehler, D. Z.

2007-01-01

In the fall of 2009, the Mars Science Laboratory (MSL) will be launched to Mars. The purpose of this mission is to assess biologic potential and geology and to investigate planetary processes of relevance to past habitability. MSL will be able to provide visual, chemical, radiation, and environmental data with its suite of instruments [1]. In order to be selected for the MSL landing site, certain engineering requirements must be met [1] and the area should contain geologic features suggestive of past habitability, so that the overriding science goal of the mission will be attained. There are a total of 33 proposed landing sites as of the first MSL Landing Site Workshop held in Pasadena, CA from May 31st to June 2nd, 2006 [1]. There will be an opportunity to gather high resolution visual and hyperspectral data on all proposed landing sites from the now-orbiting Mars Reconnaissance Orbiter (MRO) which entered martian orbit and began its main science phase in November of 2006 [2]. The data being gathered are from: the high resolution imaging science experiment (HiRISE), the context (CTX) camera and the compact reconnaissance imaging spectrometer (CRISM) onboard the spacecraft. The footprints of these instruments are centered on a single point, and each proposer must submit these coordinates, along with the coordinates of the proposed landing ellipse. Data from these instruments, along with new MOC images and THEMIS mosaics, will be used to enhance our understanding of the geologic and engineering parameters of each site.

Derivation of Mars Surface Scattering Properties from OMEGA Spot Pointing Observations

NASA Astrophysics Data System (ADS)

Pinet, P. C.; Daydou, Y.; Cord, A.; Chevrel, S. C.; Poulet, F.; Erard, S.; Bibring, J.-P.; Langevin, Y.; Melchiorri, R.; Bellucci, G.; Altieri, F.; Arvidson, R. E.; OMEGA Co-Investigator Team

2005-03-01

OMEGA emission phase function (EPF) observation shows that one may access from orbit to geology-driven surface scattering properties such as surface roughness. It has implications for spectroscopic interpretation and for CRISM observations to come.

Geologic Mapping Investigations of Alba Mons, Mars

NASA Astrophysics Data System (ADS)

Crown, D. A.; Berman, D. C.; Scheidt, S. P.; Hauber, E.

2018-06-01

Geologic mapping of the summit region and western flank of Alba Mons at 1:1M-scale is revealing sequences of volcanic, tectonic, impact, and degradation processes that have formed and modified the northernmost of the Tharsis volcanoes.

Is the Rock Cycle an Outdated Idea, or a Unifying Concept?

ERIC Educational Resources Information Center

Eves, Robert Leo; Davis, Larry Eugene

1988-01-01

Discusses how rock-cycle diagrams can graphically illustrate the interrelationship between materials and processes in physical geology courses. Reviews nine contemporary physical geology textbooks with regard to their use of such diagrams. (TW)

Geoscience techniques for engineering assessment of Oman to India pipeline route

DOE Office of Scientific and Technical Information (OSTI.GOV)

Baerenwald, P.D.; Mullee, J.E.; Campbell, K.J.

1996-12-31

A variety of geoscience techniques were used to define soil conditions and evaluate geologic processes in order to develop design criteria for complex segments of the proposed Oman to Indian pipeline route. Geophysical survey data, seafloor cores, ROV observation of the seafloor, and oceanographic measurements were the principal field data collected. Geotechnical soil testing, and X-ray radiography, detailed geologic logging, and C-14 age dating of cores were carried out. The diverse sets of field data and lab test results were integrated by a multi-disciplined team of geoscientists and engineers to develop geologic and soil models, soil design criteria, a turbidmore » flow model, and seafloor stability models. The integrated approach used here is applicable to other complex areas where seafloor stability needs to be assessed or design criteria need to be developed for active geologic processes.« less

Object-Oriented Programming When Developing Software in Geology and Geophysics

NASA Astrophysics Data System (ADS)

Ahmadulin, R. K.; Bakanovskaya, L. N.

2017-01-01

The paper reviews the role of object-oriented programming when developing software in geology and geophysics. Main stages have been identified at which it is worthwhile to apply principles of object-oriented programming when developing software in geology and geophysics. The research was based on a number of problems solved in Geology and Petroleum Production Institute. Distinctive features of these problems are given and areas of application of the object-oriented approach are identified. Developing applications in the sphere of geology and geophysics has shown that the process of creating such products is simplified due to the use of object-oriented programming, firstly when designing structures for data storage and graphical user interfaces.

An introductory review on gravitational-deformation induced structures, fabrics and modeling

NASA Astrophysics Data System (ADS)

Jaboyedoff, Michel; Penna, Ivanna; Pedrazzini, Andrea; Baroň, Ivo; Crosta, Giovanni B.

2013-10-01

Recent studies have pointed out a similarity between tectonics and slope tectonic-induced structures. Numerous studies have demonstrated that structures and fabrics previously interpreted as of purely geodynamical origin are instead the result of large slope deformation, and this led in the past to erroneous interpretations. Nevertheless, their limit seems not clearly defined, but it is somehow transitional. Some studies point out continuity between failures developing at surface with upper crust movements. In this contribution, the main studies which examine the link between rock structures and slope movements are reviewed. The aspects regarding model and scale of observation are discussed together with the role of pre-existing weaknesses in the rock mass. As slope failures can develop through progressive failure, structures and their changes in time and space can be recognized. Furthermore, recognition of the origin of these structures can help in avoiding misinterpretations of regional geology. This also suggests the importance of integrating different slope movement classifications based on distribution and pattern of deformation and the application of structural geology techniques. A structural geology approach in the landslide community is a tool that can greatly support the hazard quantification and related risks, because most of the physical parameters, which are used for landslide modeling, are derived from geotechnical tests or the emerging geophysical approaches.

Plate motions and deformations from geologic and geodetic data

NASA Technical Reports Server (NTRS)

Jordan, Thomas H.

1989-01-01

The very long baseline interferometry (VLBI) measurements made in the western U.S. since 1979 provide discrete samples of the temporal and spatial deformation field. The interpretation of the VLBI derived rates of deformation requires an examination of geologic information and more densely sampled ground based geodetic data. Triangulation and trilateration data measured on two regional networks, one in the central Mojave Desert and one in the Coast Ranges east of the San Andreas fault, were processed. At the spatial scales spanned by these local geodetic networks, auxiliary geologic and geophysical data were utilized to examine the relation between measured incremental strain and the accommodation of strain seen in local geologic structures, strain release in earthquakes, and principal stress directions inferred from in situ measurements. VLBI data was also processed from stations distributed across the Pacific-North America plate boundary zone in the western U.S. The VLBI data were used to constrain the integrated rate of deformation across portions of the continental plate boundary in California and to provide a tectonic framework to interpret regional geodetic and geologic studies.

Digital bedrock mapping at the Geological Survey of Norway: BGS SIGMA tool and in-house database structure

NASA Astrophysics Data System (ADS)

Gasser, Deta; Viola, Giulio; Bingen, Bernard

2016-04-01

Since 2010, the Geological Survey of Norway has been implementing and continuously developing a digital workflow for geological bedrock mapping in Norway, from fieldwork to final product. Our workflow is based on the ESRI ArcGIS platform, and we use rugged Windows computers in the field. Three different hardware solutions have been tested over the past 5 years (2010-2015). (1) Panasonic Toughbook CE-19 (2.3 kg), (2) Panasonic Toughbook CF H2 Field (1.6 kg) and (3) Motion MC F5t tablet (1.5 kg). For collection of point observations in the field we mainly use the SIGMA Mobile application in ESRI ArcGIS developed by the British Geological Survey, which allows the mappers to store georeferenced comments, structural measurements, sample information, photographs, sketches, log information etc. in a Microsoft Access database. The application is freely downloadable from the BGS websites. For line- and polygon work we use our in-house database, which is currently under revision. Our line database consists of three feature classes: (1) bedrock boundaries, (2) bedrock lineaments, and (3) bedrock lines, with each feature class having up to 24 different attribute fields. Our polygon database consists of one feature class with 38 attribute fields enabling to store various information concerning lithology, stratigraphic order, age, metamorphic grade and tectonic subdivision. The polygon and line databases are coupled via topology in ESRI ArcGIS, which allows us to edit them simultaneously. This approach has been applied in two large-scale 1:50 000 bedrock mapping projects, one in the Kongsberg domain of the Sveconorwegian orogen, and the other in the greater Trondheim area (Orkanger) in the Caledonian belt. The mapping projects combined collection of high-resolution geophysical data, digital acquisition of field data, and collection of geochronological, geochemical and petrological data. During the Kongsberg project, some 25000 field observation points were collected by eight geologists. For the Orkanger project, some 2100 field observation points were collected by three geologists. Several advantages of the applied digital approach became clear during these projects: (1) The systematic collection of geological field data in a common format allows easy access and exchange of data among different geologists, (2) Easier access to background information such as geophysics and DEMS in the field, (3) Faster workflow from field data collection to final map product. Obvious disadvantages include: (1) Heavy(ish) and expensive hardware, (2) Battery life and other technical issues in the field, (3) Need for a central field observation point storage inhouse (large amounts of data!), and (4) Acceptance of- and training in a common workflow from all involved geologists.

Novice to Expert Cognition During Geologic Bedrock Mapping

NASA Astrophysics Data System (ADS)

Petcovic, H. L.; Libarkin, J.; Hambrick, D. Z.; Baker, K. M.; Elkins, J. T.; Callahan, C. N.; Turner, S.; Rench, T. A.; LaDue, N.

2011-12-01

Bedrock geologic mapping is a complex and cognitively demanding task. Successful mapping requires domain-specific content knowledge, visuospatial ability, navigation through the field area, creating a mental model of the geology that is consistent with field data, and metacognition. Most post-secondary geology students in the United States receive training in geologic mapping, however, not much is known about the cognitive processes that underlie successful bedrock mapping, or about how these processes change with education and experience. To better understand cognition during geologic mapping, we conducted a 2-year research study in which 67 volunteers representing a range from undergraduate sophomore to 20+ years professional experience completed a suite of cognitive measures plus a 1-day bedrock mapping task in the Rocky Mountains, Montana, USA. In addition to participants' geologic maps and field notes, the cognitive suite included tests and questionnaires designed to measure: (1) prior geologic experience, via a self-report survey; (2) geologic content knowledge, via a modified version of the Geoscience Concept Inventory; (3) visuospatial ability, working memory capacity, and perceptual speed, via paper-and-pencil and computerized tests; (4) use of space and time during mapping via GPS tracking; and (5) problem-solving in the field via think-aloud audio logs during mapping and post-mapping semi-structured interviews. Data were examined for correlations between performance on the mapping task and other measures. We found that both geological knowledge and spatial visualization ability correlated positively with accuracy in the field mapping task. More importantly, we found a Visuospatial Ability × Geological Knowledge interaction, such that visuospatial ability positively predicted mapping performance at low, but not high, levels of geological knowledge. In other words, we found evidence to suggest that visuospatial ability mattered for bedrock mapping for the novices in our sample, but not for the experts. For experienced mappers, we found a significant correlation between GCI scores and the thoroughness with which they covered the map area, plus a relationship between speed and map accuracy such that faster mappers produced better maps. However, fast novice mappers tended to produce the worst maps. Successful mappers formed a mental model of the underlying geologic structure immediately to early in the mapping task, then spent field time collecting observations to confirm, disconfirm, or modify their initial model. In contrast, the least successful mappers (all inexperienced) rarely generated explanations or models of the underlying geologic structure in the field.

Supercritical CO2 Migration under Cross-Bedded Structures: Outcrop Analog from the Jurassic Navajo Sandstone

NASA Astrophysics Data System (ADS)

Lee, S.; Allen, J.; Han, W.; Lu, C.; McPherson, B. J.

2011-12-01

Jurassic aeolian sandstones (e.g. Navajo and White Rim Sandstones) on the Colorado Plateau of Utah have been considered potential sinks for geologic CO2 sequestration due to their regional lateral continuity, thickness, high porosity and permeability, presence of seal strata and proximity to large point sources of anthropogenic CO2. However, aeolian deposits usually exhibit inherent internal complexities induced by migrating bedforms of different sizes and their resulting bounding surfaces. Therefore, CO2 plume migration in such complex media should be well defined and successively linked in models for better characterization of the plume behavior. Based on an outcrop analog of the upper Navajo Sandstone in the western flank of the San Rafael Swell, Utah, we identified five different bedform types with dune and interdune facies to represent the spatial continuity of lithofacies units. Using generated 3D geometrical facies patterns of cross-bedded structures in the Navajo Sandstone, we performed numerical simulations to understand the detailed behavior of CO2 plume migration under the different cross-bedded bedforms. Our numerical simulation results indicate that cross-bedded structures (bedform types) play an important role on governing the rate and directionality of CO2 migration, resulting in changes of imbibition processes of CO2. CO2 migration tends to follow wind ripple laminations and reactivation surfaces updip. Our results suggest that geologically-based upscaling of CO2 migration is crucial in cross-bedded formations as part of reservoir or basin scale models. Furthermore, comparative modeling studies between 3D models and 2D cross-sections extracted from 3D models showed the significant three-dimensional interplay in a cross-bedded structure and the need to correctly capture the geologic heterogeneity to predict realistic CO2 plume behavior. Our outcrop analog approach presented in this study also demonstrates an alternative method for assessing geologic CO2 storage in deep formations when scarce data is available.

Where do students struggle in the field? Computer-aided evaluation of mapping errors from an undergraduate Field Geology summer course

NASA Astrophysics Data System (ADS)

Lang, K. A.; Petrie, G.

2014-12-01

Extended field-based summer courses provide an invaluable field experience for undergraduate majors in the geosciences. These courses often utilize the construction of geological maps and structural cross sections as the primary pedagogical tool to teach basic map orientation, rock identification and structural interpretation. However, advances in the usability and ubiquity of Geographic Information Systems in these courses presents new opportunities to evaluate student work. In particular, computer-based quantification of systematic mapping errors elucidates the factors influencing student success in the field. We present a case example from a mapping exercise conducted in a summer Field Geology course at a popular field location near Dillon, Montana. We use a computer algorithm to automatically compare the placement and attribution of unit contacts with spatial variables including topographic slope, aspect, bedding attitude, ground cover and distance from starting location. We compliment analyses with anecdotal and survey data that suggest both physical factors (e.g. steep topographic slope) as well as structural nuance (e.g. low angle bedding) may dominate student frustration, particularly in courses with a high student to instructor ratio. We propose mechanisms to improve student experience by allowing students to practice skills with orientation games and broadening student background with tangential lessons (e.g. on colluvial transport processes). As well, we suggest low-cost ways to decrease the student to instructor ratio by supporting returning undergraduates from previous years or staging mapping over smaller areas. Future applications of this analysis might include a rapid and objective system for evaluation of student maps (including point-data, such as attitude measurements) and quantification of temporal trends in student work as class sizes, pedagogical approaches or environmental variables change. Long-term goals include understanding and characterizing stochasticity in geological mapping beyond the undergraduate classroom, and better quantifying uncertainty in published map products.

Updated symbol catalogue for geologic and geomorphologic mapping in Planetary Scinces

NASA Astrophysics Data System (ADS)

Nass, Andrea; Fortezzo, Corey; Skinner, James, Jr.; Hunter, Marc; Hare, Trent

2017-04-01

Maps are one of the most powerful communication tools for spatial data. This is true for terrestrial data, as well as the many types of planetary data. Geologic and/or geomorphologic maps of planetary surfaces, in particular those of the Moon, Mars, and Venus, are standardized products and often prepared as a part of hypothesis-driven science investigations. The NASA-funded Planetary Geologic Mapping program, coordinated by the USGS Astrogeology Science Center (ASC), produces high-quality, standardized, and refereed geologic maps and digital databases of planetary bodies. In this context, 242 geologic, geomorphologic, and thematic map sheets and map series have been published since the 1962. However, outside of this program, numerous non-USGS published maps are created as result of scientific investigations and published, e.g. as figures or supplemental materials within a peer-reviewed journal article. Due to the complexity of planetary surfaces, diversity between different planet surfaces, and the varied resolution of the data, geomorphologic and geologic mapping is a challenging task. Because of these limiting conditions, the mapping process is a highly interpretative work and is mostly limited to remotely sensed satellite data - with a few expetions from rover data. Uniform and an unambiguous data are fundamental to make quality observations that lead to unbiased and supported interpretations, especially when there is no current groundtruthing. To allow for correlation between different map products (digital or analog), the most commonly used spatial objects are predefined cartographic symbols. The Federal Geographic Data Committee (FGDC) Digital Cartographic Standard for Geologic Map Symbolization (DCSGMS) defines the most commonly used symbols, colors, and hatch patterns in one comprehensive document. Chapter 25 of the DCSGMS defines the Planetary Geology Features based on the symbols defined in the Venus Mapper's Handbook. After reviewing the 242 planetary geological maps, we propose to 1) review standardized symbols for planetary maps, and 2) recommend an updated symbol collection for adoption by the planetary mapping community. Within these points, the focus is on the changing of symbology with respect to time and how it effects communication within and between the maps. Two key questions to address are 1) does chapter 25 provides enough variability within the subcategories (e.g., faults) to represent the data within the maps? 2) How recommendations to the mapping community and their steering committees could be delivered to enhance a map's communicability, and convey information succinctly but thoroughly. For determining the most representative symbol collection of existing maps to support future map results (within or outside of USGS mapping program) we defined a stepwise task list: 1) Statistical review of existing symbol sets and collections, 2) Establish a representative symbol set for planetary mapping, 3) Update cartographic symbols, 4) Implementation into GIS-based mapping software (this implementation will mimic the 2010 application of the planetary symbol set into ArcGIS (more information https://planetarymapping.wr.usgs.gov/Project). 6) Platform to provide the symbol set to the mapping community. This project was initiated within an ongoing cooperation work between the USGS ASC and the German Aerospace Center (DLR), Dept. of Planetary Geology.

Automatic mapping of the base of aquifer — A case study from Morrill, Nebraska

USGS Publications Warehouse

Gulbrandsen, Mats Lundh; Ball, Lyndsay B.; Minsley, Burke J.; Hansen, Thomas Mejer

2017-01-01

When a geologist sets up a geologic model, various types of disparate information may be available, such as exposures, boreholes, and (or) geophysical data. In recent years, the amount of geophysical data available has been increasing, a trend that is only expected to continue. It is nontrivial (and often, in practice, impossible) for the geologist to take all the details of the geophysical data into account when setting up a geologic model. We have developed an approach that allows for the objective quantification of information from geophysical data and borehole observations in a way that is easy to integrate in the geologic modeling process. This will allow the geologist to make a geologic interpretation that is consistent with the geophysical information at hand. We have determined that automated interpretation of geologic layer boundaries using information from boreholes and geophysical data alone can provide a good geologic layer model, even before manual interpretation has begun. The workflow is implemented on a set of boreholes and airborne electromagnetic (AEM) data from Morrill, Nebraska. From the borehole logs, information about the depth to the base of aquifer (BOA) is extracted and used together with the AEM data to map a surface that represents this geologic contact. Finally, a comparison between our automated approach and a previous manual mapping of the BOA in the region validates the quality of the proposed method and suggests that this workflow will allow a much faster and objective geologic modeling process that is consistent with the available data.