The Diffusion of Evidence-Based Practice: Reviewing the Evidence-Based Practice Networks in the United States and German-Speaking Countries.

PubMed

Ghanem, Christian; Lawson, Thomas R; Pankofer, Sabine; Maragkos, Markos; Kollar, Ingo

2017-01-01

Evidence-based practice (EBP) has had a major influence on U.S. social work while it has rarely been adapted in German-speaking countries. This study investigates how knowledge about EBP is diffused within and across geographical contexts. Network analysis methods reveals different diffusion patterns and provide reasons for these differences. For example, the U.S. discourse is self-contained and based on a more homogeneous knowledge base, while the German discourse is more heterogeneous and focuses on a notion of reflexive professionalism. The different conceptual influences within the U.S. and German discourses are discussed in light of future directions of disciplinary social work.

Essential Cultural Information and Suggestions for Teaching It in German Business Courses.

ERIC Educational Resources Information Center

Gerulaitis, Renate

A course in German for business on the college level must engage in cross-cultural training as well as teach specialized vocabulary and conversational German for international business dealings. Materials and methods for such a course are described. Some generally untapped sources for material on corporate culture that are suited for use in the…

Easy and effective--web-based information systems designed and maintained by physicians: experience with two gynecological projects.

PubMed

Kupka, M S; Dorn, C; Richter, O; van der Ven, H; Baur, M

2003-08-01

It is well established that medical information sources develop continuously from printed media to digital online sources. To demonstrate effectiveness and feasibility of decentralized performed web-based information sources for health professionals, two projects are described. The information platform of the German Working Group for Information Technologies in Gynecology and Obstetrics (AIG) and the information source concerning the German Registry for in vitro fertilization (DIR) were implemented using ordinary software and standard computer equipment. Only minimal resources and training were necessary to perform safe and reliable web-based information sources with a high correlation of effectiveness in costs and time exposure.

The low-temperature scintillation properties of bismuth germanate and its application to high-energy gamma radiation imaging devices.

PubMed

Piltingsrud, H V

1979-12-01

Bismuth germanate is a scintillation material with very high z, and high density (7.13 g/cm3). It is a rugged, nonhygroscopic, crystalline material with room-temperature scintillation properties described by previous investigators as having a light yield approximately 8% of that of NaI(Tl), emission peak at approximately 480 nm, decay constant of 0.3 microsec, and energy resolution congruent to 15% (FWHM) for Cs-137 gamma radiations. These properties make it an excellent candidate for applications involving the detection of high-energy gamma photons and positron annihilation radiation, particularly when good spatial resolution is desired. At room temperature, however, the application of this material is somewhat limited by low light output and poor energy resolution. This paper presents new data on the scintillation properties of bismuth germanate as a function of temperature from -- 196 degrees C to j0 degrees C. Low-temperature use of the material is shown to greatly improve its light yield and energy resolution. The implications of this work to the design of imaging devices for high-energy radiation in health physics and nuclear medicine are discussed.

The Influence of Finiteness and Lightness on Verb Placement in L2 German: Comparing Child and Adult Learners

ERIC Educational Resources Information Center

Schimke, Sarah; Dimroth, Christine

2018-01-01

In this study, verb placement with respect to negation is investigated in elicited production and elicited sentence imitation data collected with child second language (L2) learners of German. These data are compared to published data from adult L2 learners, which were collected with the same elicitation materials and were re-analysed for the…

Occurrence of perfluoroalkyl sulfonates and carboxylates in German drinking water sources compared to other countries.

PubMed

Lange, F T; Wenz, M; Schmidt, C K; Brauch, H-J

2007-01-01

Different homologues of C4 to C8 perfluoroalkyl carboxylates (PFCAs) and perfluoroalkyl sulfonates (PFASs) were detected in German surface waters, bank filtrates, artificially recharged groundwaters, and drinking waters. If no point sources are located nearby, the typically measured levels are in the low ng/L range. In the presence of point sources, such as a fluorochemical production site, a leaching agricultural fertilizer contaminated with PFCAs and PFASs, or drained PFC containing fire-fighting foams, much higher concentrations in the microg/L range occur. This situation is similar in Germany and other countries.

The processing and comprehension of wh-questions among L2 German speakers

PubMed Central

Jackson, Carrie N.; Bobb, Susan C.

2009-01-01

Using the self-paced-reading paradigm, the present study examines whether highly proficient second language (L2) speakers of German (English L1) use case-marking information during the on-line comprehension of unambiguous wh-extractions, even when task demands do not draw explicit attention to this morphosyntactic feature in German. Results support previous findings, in that both the native and the L2 German speakers exhibited an immediate subject-preference in the matrix clause, suggesting they were sensitive to case-marking information. However, only among the native speakers did this subject-preference carry over to reading times in the complement clause. The results from the present study are discussed in light of current debates regarding the ability of L2 speakers to attain native-like processing strategies in their L2. PMID:20161006

[Citation rates of medical German-language journals in English-language papers - do they correlate with the Impact Factor, and who cites?].

PubMed

Winkmann, G; Schlutius, S; Schweim, H G

2002-01-25

Several publications are warning that the German language is no longer needed for transmission of scientific data. One of the causes may be the Impact Factor (IF), which appears to be derived predominantly from Anglo-American journals. The aim of this study was to check actual international attention paid to German-language journals, i. e. their citation frequencies in English-language papers. Are these citing rates in English-language articles correlated to the IF, and from where do citing articles originate? Of 25 arbitrarily selected >85 % German-language medical journals, IF as well as language distributions of citing articles were determined by searching publication years 1995 - 2000 in Science Citation Index (SCI). MEDLINE and EMBASE were used as supplementary retrieval systems. (i) The sample journals displayed an average IF = 0.357. A 99 % correlation (Pearson factor r = 0.987; n = 25) was observed between our > constructed< IF 2000 and IF published in Journal Citation Report 2000. This proves Stegmann's IF determination method to be valid. On the average, 53 % German-language and 45 % English-language articles between 1995 - 2000 cited the 1995 - 1999' contributions of the studied journals. No correlation was observed between IF vs. rates of citing articles in English (r <0.1). 64 % of citing English-language articles showed corporate sources in Germany/ Austria/ Switzerland, and 13.5 % authors' institutions in USA. (i) An IF >/=1 is, obviously, very hard to attain by German-language journals. ISI's differentiation between Citing vs. Cited-only Journals (the latter often serving as MEDLINE/ EMBASE sources) during derivation of IF appears unjustified. (ii) English now serves as the predominant communication language in sciences in German-speaking countries, but has not supplanted the German language. Our study reveals remarkable international attention rates remaining.

Analyzing the severity of accidents on the German Autobahn.

PubMed

Manner, Hans; Wünsch-Ziegler, Laura

2013-08-01

We study the severity of accidents on the German Autobahn in the state of North Rhine-Westphalia using data for the years 2009 until 2011. We use a multinomial logit model to identify statistically relevant factors explaining the severity of the most severe injury, which is classified into the four classes fatal, severe injury, light injury and property damage. Furthermore, to account for unobserved heterogeneity we use a random parameter model. We study the effect of a number of factors including traffic information, road conditions, type of accidents, speed limits, presence of intelligent traffic control systems, age and gender of the driver and location of the accident. Our findings are in line with studies in different settings and indicate that accidents during daylight and at interchanges or construction sites are less severe in general. Accidents caused by the collision with roadside objects, involving pedestrians and motorcycles, or caused by bad sight conditions tend to be more severe. We discuss the measures of the 2011 German traffic safety programm in the light of our results. Copyright © 2013 Elsevier Ltd. All rights reserved.

Safety and Security of Radioactive Sealed and Disused/Orphan Sources in Ukraine - German Contribution - 13359

DOE Office of Scientific and Technical Information (OSTI.GOV)

Brasser, Thomas; Hertes, Uwe; Meyer, Thorsten

2013-07-01

Within the scope of 'Nuclear Security of Radioactive Sources', the German government implemented the modernization of Ukrainian State Production Company's transport and storage facility for radioactive sources (TSF) in Kiev. The overall management of optimizing the physical protection of the storage facility (including the construction of a hot cell for handling the radioactive sources) is currently carried out by the German Federal Foreign Office (AA). AA jointly have assigned Gesellschaft fuer Anlagen- und Reaktorsicherheit (GRS) mbH, Germany's leading expert institution in the area of nuclear safety and waste management, to implement the project and to ensure transparency by financial andmore » technical monitoring. Sealed radioactive sources are widely used in industry, medicine and research. Their life cycle starts with the production and finally ends with the interim/long-term storage of the disused sources. In Ukraine, IZOTOP is responsible for all radioactive sources throughout their life cycle. IZOTOP's transport and storage facility (TSF) is the only Ukrainian storage facility for factory-fresh radioactive sources up to an activity of about 1 million Ci (3.7 1016 Bq). The TSF is specially designed for the storage and handling of radioactive sources. Storage began in 1968, and is licensed by the Ukrainian state authorities. Beside the outdated state of TSF's physical protection and the vulnerability of the facility linked with it, the lack of a hot cell for handling and repacking radioactive sources on the site itself represents an additional potential hazard. The project, financed by the German Federal Foreign Office, aims to significantly improve the security of radioactive sources during their storage and handling at the TSF site. Main tasks of the project are a) the modernization of the physical protection of the TSF itself in order to prevent any unauthorized access to radioactive sources as well as b) the construction of a hot cell to reduce the number of transports of radioactive sources within the city of Kiev. In future, the new established hot cell at IZOTOP's transport and storage facility will be useful for identification and characterization of orphan/disused radioactive sources. The projects implemented are performed in accordance with international recommendations (e. g. IAEA) and national normative documents and will make a crucial contribution towards an improved safety and security management of radioactive sources in Ukraine. (authors)« less

Silica and Germanate Glass High Power Fiber Laser Sources

DTIC Science & Technology

2014-01-01

with bismuth germanate glasses. The lower phonon energy offers negligible nonradiative multiphonon relaxation of rare earth transitions up to 2.5µm...of the various emission transitions. [1] J.M.F. van Dijk, M.F.H. Schuurmans, “On the nonradiative and radiative decay rates and a modified

Book Publishing in the German Democratic Republic.

ERIC Educational Resources Information Center

Hueting, Gail P.

1982-01-01

Presents information about book publishing in the German Democratic Republic (GDR), drawing on a variety of sources, including a survey sent to the publishing houses themselves. The reading public, organization of the publishing industry, and centralized administration are discussed. An appendix listing GDR publishers and a 33-item reference list…

Das Licht am Ende des Tunnels: Motivationsstrukturen fur den Deutschunterricht Reflexionen uber ein altes und stets neues Problem (The Light at the End of the Tunnel: Structures for Motivating German Teaching. Reflections on an Old and Continually New Problem).

ERIC Educational Resources Information Center

Classen, Albrecht

2001-01-01

Argues that despite the decline in enrollments in German at elementary and secondary schools and colleges and universities, there is reason to hope that interest can be invigorated. Suggests that there are easy instructional methods and materials for developing a new motivation in learning the language. (Author/VWL)

Jehovah's Witness patients within the German medical landscape.

PubMed

Rajtar, Małgorzata

2016-08-01

Blood transfusions belong to standard and commonly utilised biomedical procedures. Jehovah's Witnesses' transfusion refusals are often referred to in bioethical and medical textbooks. Members of this globally active religious organisation do not, however, challenge biomedical diagnosis and treatment as such. A result of both their trust in and their interpretation of the Bible, they question only this medical treatment. In spite of the global presence of this religious community and its uniformly practised teachings, including those pertaining to blood, experiences and choices of Jehovah's Witness patients have been understudied. Drawing on a nine-month fieldwork with Jehovah's Witnesses and physicians in Germany (mainly in Berlin) between 2010 and 2012, the paper addresses treatment choices made by Witness patients and their relationship with physicians. In light of the long tradition of 'medical heterodoxy' established in German culture and society, Germany constitutes an ideal point of departure for such a study. By utilising the concept of 'medical landscape' it is argued that Jehovah's Witnesses in my field site find themselves at the intersection of different medical landscapes: in the 'immediate' surroundings of the German healthcare system that is open to different 'treatment modalities', and that of the United States, which favours biomedicine. The paper also argues that Jehovah's Witnesses' position towards blood transfusions can further be used as a lens to shed light on the German (bio)medical landscape itself.

Using eye-tracking to study the on-line processing of case-marking information among intermediate L2 learners of German

PubMed Central

Jackson, Carrie N.; Dussias, Paola E.; Hristova, Adelina

2012-01-01

This study uses eye-tracking to examine the processing of case-marking information in ambiguous subject- and object-first wh-questions in German. The position of the lexical verb was also manipulated via verb tense to investigate whether verb location influences how intermediate L2 learners process L2 sentences. Results show that intermediate L2 German learners were sensitive to case-marking information, exhibiting longer processing times on subject-first than object-first sentences, regardless of verb location. German native speakers exhibited the opposite word order preference, with longer processing times on object-first than subject-first sentences, replicating previous findings. These results are discussed in light of current L2 processing research, highlighting how methodological constraints influence researchers’ abilities to measure the on-line processing of morphosyntactic information among intermediate L2 learners. PMID:23493761

[S2k-Guideline on Meniscal Disease: Non-operative and Surgical Management].

PubMed

Siebert, Christian H; Becker, Roland; Buchner, Matthias; Förster, Jürgen; Frosch, Karl-Heinz; Losch, Andreas; Niemeyer, Philipp; Scheffler, Sven

2018-03-12

A meniscal injury should not automatically lead to surgery. Even in light of all the developments in arthroscopic surgery, non-operative management still has a place in the treatment algorithms for lesions around the knee. In this second publication of the German guidelines for meniscal surgery, the authors describe the various treatment possibilities, their indications and offer critical insight into the various therapeutic options. This will allow the patient and physician alike to make the proper individual decisions. Various German speaking associations addressing topics surrounding the knee have joined forces to develop these guidelines for meniscal lesions. The hope is that these two publications on the topic will shed light on the ongoing debate and offer some guidance. Georg Thieme Verlag KG Stuttgart · New York.

Why Do I Feel More Confident? Bandura's Sources Predict Preservice Teachers' Latent Changes in Teacher Self-Efficacy

PubMed Central

Pfitzner-Eden, Franziska

2016-01-01

Teacher self-efficacy (TSE) is associated with a multitude of positive outcomes for teachers and students. However, the development of TSE is an under-researched area. Bandura (1997) proposed four sources of self-efficacy: mastery experiences, vicarious experiences, verbal persuasion, and physiological and affective states. This study introduces a first instrument to assess the four sources for TSE in line with Bandura's conception. Gathering evidence of convergent validity, the contribution that each source made to the development of TSE during a practicum at a school was explored for two samples of German preservice teachers. The first sample (N = 359) were beginning preservice teachers who completed an observation practicum. The second sample (N = 395) were advanced preservice teachers who completed a teaching practicum. The source measure showed good reliability, construct validity, and convergent validity. Latent true change modeling was applied to explore how the sources predicted changes in TSE. Three different models were compared. As expected, results showed that TSE changes in both groups were significantly predicted by mastery experiences, with a stronger relationship in the advanced group. Further, the results indicated that mastery experiences were largely informed by the other three sources to varying degrees depending on the type of practicum. Implications for the practice of teacher education are discussed in light of the results. PMID:27807422

Why Do I Feel More Confident? Bandura's Sources Predict Preservice Teachers' Latent Changes in Teacher Self-Efficacy.

PubMed

Pfitzner-Eden, Franziska

2016-01-01

Teacher self-efficacy (TSE) is associated with a multitude of positive outcomes for teachers and students. However, the development of TSE is an under-researched area. Bandura (1997) proposed four sources of self-efficacy: mastery experiences, vicarious experiences, verbal persuasion, and physiological and affective states. This study introduces a first instrument to assess the four sources for TSE in line with Bandura's conception. Gathering evidence of convergent validity, the contribution that each source made to the development of TSE during a practicum at a school was explored for two samples of German preservice teachers. The first sample ( N = 359) were beginning preservice teachers who completed an observation practicum. The second sample ( N = 395) were advanced preservice teachers who completed a teaching practicum. The source measure showed good reliability, construct validity, and convergent validity. Latent true change modeling was applied to explore how the sources predicted changes in TSE. Three different models were compared. As expected, results showed that TSE changes in both groups were significantly predicted by mastery experiences, with a stronger relationship in the advanced group. Further, the results indicated that mastery experiences were largely informed by the other three sources to varying degrees depending on the type of practicum. Implications for the practice of teacher education are discussed in light of the results.

Scouts Out! The Development of Reconnaissance Units in Modern Armies

DTIC Science & Technology

2008-01-01

Waffen -SS im Zweiten Weltkrieg 1939–1945, Band 2: Die Landstreitkräfte. Nrn. 1-5 (Osnabrück, GE: Biblio Verlag, 1973), 175. As an exception to light...tracks.37 Later in the war, the Waffen SS developed into a major armored component of the German Armed Forces. Waffen SS divisions, including their...was the Waffen SS, a component of the German land forces in World War II) svc service T tng training TOE table of

Cross-Linguistic Influence in L3 Phonological Acquisition

ERIC Educational Resources Information Center

Gut, Ulrike

2010-01-01

This study investigates possible sources and directions of cross-linguistic influence on vowel reduction and speech rhythm produced by four trilingual speakers with different L1s in their L2 (German or English) and L3 (English or German). It was shown that, compared to native speakers, the speakers produced distinct differences in these…

Qualification and Employment Opportunities. IAB Labour Market Research Topics No. 38.

ERIC Educational Resources Information Center

Rauch, Angela; Reinberg, Alexander

Official German unemployment statistics were analyzed along with data from Germany's microcensus and other published sources to identify recent labor market trends and to clarify the relationship between qualifications and employment opportunities in the new German economy. The analysis revealed that, as has been true for years, the lower the…

Occupational Socialization of Sport Pedagogy Faculty: Two German Case Studies

ERIC Educational Resources Information Center

Merrem, Anne M.; Curtner-Smith, Matthew D.

2018-01-01

Purpose: The purpose of this study was to describe the influence of occupational socialization on the perspectives and practices of two female German sport pedagogy faculty members, Heidi and Lisa, regarding physical education (PE) and PE teacher education (PETE). Method: The main data sources were six formal interviews. Supplementary data were…

German Support Program for Retrieval and Safe Storage of Disused Radioactive Sealed Sources in Ukraine - 13194

DOE Office of Scientific and Technical Information (OSTI.GOV)

Pretzsch, Gunter; Salewski, Peter; Sogalla, Martin

2013-07-01

The German Federal Ministry for the Environment, Nature Conservation and Nuclear Safety (BMU) on behalf of the Government of the Federal Republic of Germany supports the State Nuclear Regulatory Inspectorate of Ukraine (SNRIU) in enhancement of nuclear safety and radiation protection and strengthening of the physical protection. One of the main objectives of the agreement concluded by these parties in 2008 was the retrieval and safe interim storage of disused orphan high radioactive sealed sources in Ukraine. At present, the Ukrainian National Registry does not account all high active radiation sources but only for about 70 - 80 %. GRSmore » in charge of BMU to execute the program since 2008 concluded subcontracts with the waste management and interim storage facilities RADON at different regions in Ukraine as well with the waste management and interim storage facility IZOTOP at Kiev. Below selected examples of removal of high active Co-60 and Cs-137 sources from irradiation facilities at research institutes are described. By end of 2012 removal and safe interim storage of 12.000 disused radioactive sealed sources with a total activity of more than 5,7.10{sup 14} Bq was achieved within the frame of this program. The German support program will be continued up to the end of 2013 with the aim to remove and safely store almost all disused radioactive sealed sources in Ukraine. (authors)« less

[Caught between economic pressure and work-life balance--perspectives on emigration of German health professionals to Austria].

PubMed

Schmidt, A E; Klambauer, E

2014-05-01

Given the increasing lack of medical doctors in Germany, this study aimed to investigate the professional situation and the push and pull factors of German medical specialists working in Austrian hospitals. This explorative study is based on semi-structured interviews with 14 specialists working in Austria, who completed their education partly or fully in Germany. The material has been interpreted using qualitative content analysis. Better work-life balance, higher quality of life and more favourable working conditions represent major reasons for German specialists to stay in Austria. Moreover, the higher density of medical doctors in Austrian hospitals can have an impact on the distribution of responsibilities among health-care personnel, and on hospital performance. In the light of recent reforms in the German health-care system, the study underlines the importance of qualitative factors for the satisfaction of German medical doctors. These factors should be further analysed in order to avoid a brain drain of high-qualified health care staff in the future. © Georg Thieme Verlag KG Stuttgart · New York.

Vestibular morphology in the German Waltzing guinea pig.

PubMed

Kawaguchi, Sachie; Hultcrantz, Malou; Jin, Zhe; Ulfendahl, Mats; Suzuki, Mamoru

2010-04-01

The German waltzing guinea pig is a special strain of animal with a recessively inherited inner ear defect, resulting in deafness and a severe vestibular dysfunction. The hearing loss in the cochlea of the German strain is a result of a collapse of the Reissner membrane and the absence of scala media. The vestibular organ has not yet been described. German waltzing guinea pigs (homozygote and heterozygote) of different ages ranging from embryologic age 25 days to adulthood were investigated. The living animals were tested with four different vestibular tests, and the fetuses were controlled according to breeding. The morphology of the vestibular parts (ampulla, saccule, and utricle) was observed by using the light and transmission electron microscopy. Collapse of the membranous labyrinth was found already at embryologic age 50 days and progressed over time. Vestibular dysfunction was noted already from birth. Vestibular atelectasis has been shown to have the same morphology as the reported vestibular dysfunction in the German waltzing guinea pig. Owing to this similarity, this animal can be a good model for vestibular research.

[Citation rates of medical German-language journals in English-language papers--do they correlate with the impact factor, and who cites? (reprint)].

PubMed

Winkmann, G; Schlutius, S; Schweim, H G

2002-01-01

Several publications are warning that the German language is no longer needed for transmission of scientific data. One of the causes may be the Impact Factor (IF), which appears to be derived predominantly from Anglo-American journals. The aim of this study was to check actual international attention paid to German-language journals, i. e. their citation frequencies in English-language papers. Are these citing rates in English-language articles correlated to the IF, and from where do citing articles originate? Of 25 arbitrarily selected > 85 % German-language medical journals, IF as well as language distributions of citing articles were determined by searching publication years 1995 - 2000 in Science Citation Index (SCI). MEDLINE and EMBASE were used as supplementary retrieval systems. (i) The sample journals displayed an average IF = 0.357. A 99 % correlation (Pearson factor r = 0.987; n = 25) was observed between our "constructed" IF 2000 and IF published in Journal Citation Report 2000. This proves Stegmann's IF determination method to be valid. On the average, 53 % German-language and 45 % English-language articles between 1995 - 2000 cited the 1995 - 1999' contributions of the studied journals. No correlation was observed between IF vs. rates of citing articles in English (r < 0.1). 64 % of citing English-language articles showed corporate sources in Germany/Austria/Switzerland, and 13.5 % authors' institutions in USA. (i) An IF >/= 1 is, obviously, very hard to attain by German-language journals. ISI's differentiation between Citing vs. Cited-only Journals (the latter often serving as MEDLINE/EMBASE sources) during derivation of IF appears unjustified. (ii) English now serves as the predominant communication language in sciences in German-speaking countries, but has not supplanted the German language. Our study reveals remarkable international attention rates remaining.

Advanced light microscopy core facilities: Balancing service, science and career

PubMed Central

Hartmann, Hella; Reymann, Jürgen; Ansari, Nariman; Utz, Nadine; Fried, Hans‐Ulrich; Kukat, Christian; Peychl, Jan; Liebig, Christian; Terjung, Stefan; Laketa, Vibor; Sporbert, Anje; Weidtkamp‐Peters, Stefanie; Schauss, Astrid; Zuschratter, Werner; Avilov, Sergiy

2016-01-01

ABSTRACT Core Facilities (CF) for advanced light microscopy (ALM) have become indispensable support units for research in the life sciences. Their organizational structure and technical characteristics are quite diverse, although the tasks they pursue and the services they offer are similar. Therefore, throughout Europe, scientists from ALM‐CFs are forming networks to promote interactions and discuss best practice models. Here, we present recommendations for ALM‐CF operations elaborated by the workgroups of the German network of ALM‐CFs, German Bio‐Imaging (GerBI). We address technical aspects of CF planning and instrument maintainance, give advice on the organization and management of an ALM‐CF, propose a scheme for the training of CF users, and provide an overview of current resources for image processing and analysis. Further, we elaborate on the new challenges and opportunities for professional development and careers created by CFs. While some information specifically refers to the German academic system, most of the content of this article is of general interest for CFs in the life sciences. Microsc. Res. Tech. 79:463–479, 2016. © 2016 THE AUTHORS MICROSCOPY RESEARCH AND TECHNIQUE PUBLISHED BY WILEY PERIODICALS, INC. PMID:27040755

Advanced light microscopy core facilities: Balancing service, science and career.

PubMed

Ferrando-May, Elisa; Hartmann, Hella; Reymann, Jürgen; Ansari, Nariman; Utz, Nadine; Fried, Hans-Ulrich; Kukat, Christian; Peychl, Jan; Liebig, Christian; Terjung, Stefan; Laketa, Vibor; Sporbert, Anje; Weidtkamp-Peters, Stefanie; Schauss, Astrid; Zuschratter, Werner; Avilov, Sergiy

2016-06-01

Core Facilities (CF) for advanced light microscopy (ALM) have become indispensable support units for research in the life sciences. Their organizational structure and technical characteristics are quite diverse, although the tasks they pursue and the services they offer are similar. Therefore, throughout Europe, scientists from ALM-CFs are forming networks to promote interactions and discuss best practice models. Here, we present recommendations for ALM-CF operations elaborated by the workgroups of the German network of ALM-CFs, German Bio-Imaging (GerBI). We address technical aspects of CF planning and instrument maintainance, give advice on the organization and management of an ALM-CF, propose a scheme for the training of CF users, and provide an overview of current resources for image processing and analysis. Further, we elaborate on the new challenges and opportunities for professional development and careers created by CFs. While some information specifically refers to the German academic system, most of the content of this article is of general interest for CFs in the life sciences. Microsc. Res. Tech. 79:463-479, 2016. © 2016 THE AUTHORS MICROSCOPY RESEARCH AND TECHNIQUE PUBLISHED BY WILEY PERIODICALS, INC. © 2016 The Authors Microscopy Research and Technique Published by Wiley Periodicals, Inc.

An Analysis of Spanish and German Learners' Errors. Working Papers on Bilingualism, No. 7.

ERIC Educational Resources Information Center

LoCoco, Veronica Gonzalez-Mena

This study analyzes Spanish and German errors committed by adult native speakers of English enrolled in elementary and intermediate levels. Four written samples were collected for each target language, over a period of five months. Errors were categorized according to their possible source. Types of errors were ordered according to their…

Information Sources Used by Tourists: Resources Consulted by American, German, and Japanese Visitors to Taiwan

ERIC Educational Resources Information Center

Lu, Carol Yi-Rong

2009-01-01

The Taiwan travel information resources used by American, German, and Japanese tourists in 2006 are identified and analyzed in this study. Differences among demographic groups regarding types of information accessed, spending behaviors, and levels of satisfaction with available travel resources were examined. The study was based on analysis of…

Characterization of PbWO4 crystals for high-energy physics experiments

NASA Astrophysics Data System (ADS)

Kim, M. J.; Park, H.; Kim, H. J.

2016-09-01

High-energy physics (HEP) experiments have employed many new types of scintillators. Specifically, bismuth germanate, thallium-doped cesium iodide, and lead tungstate (PbWO4, PWO) have been used for the L3 experiment; CLEO II, Belle and BES-III; and CMS, respectively. PWO has particularly beneficial properties, such as high density, fast decay time, short radiation length and radiation hardness. In this study, we tested the PWO crystals at low temperatures to determine their applicability in future calorimeters. Various crystals from the Proton Antiproton Annihilations at Darmstadt (PANDA) experiment in Giessen, the Bogoroditsk Techno-Chemical Plant (BTCP) in Russia and by Shanghai Institute of Ceramics, Chinese Academy of Sciences (SICCAS) in China were investigated. We studied the scintillation properties of PWO crystals, such as their X-ray luminescence, relative light yields, absolute light yields, energy resolutions, decay times and longitudinal uniformities of their light yields. In addition, we measured the temperature dependences of the light yields and decay times by using a 137Cs γ-ray source. The emission spectra of the PWO crystals consisted of a broad band from 350 nm to 700 nm, and the peak emission wavelength in each spectrum was 420 nm. The emission spectra of the PWO crystals from SICCAS were slightly shifted to longer wavelengths compared with those of the crystals from the other institutions.

Shale Gas and Oil in Germany - Resources and Environmental Impacts

NASA Astrophysics Data System (ADS)

Ladage, Stefan; Blumenberg, Martin; Houben, Georg; Pfunt, Helena; Gestermann, Nicolai; Franke, Dieter; Erbacher, Jochen

2017-04-01

In light of the controversial debate on "unconventional" oil and gas resources and the environmental impacts of "fracking", the Federal Institute for Geosciences and Natural Resources (BGR) conducted a comprehensive resource assessment of shale gas and light tight oil in Germany and studied the potential environmental impacts of shale gas development and hydraulic fracturing from a geoscientific perspective. Here, we present our final results (BGR 2016), incorporating the majority of potential shale source rock formations in Germany. Besides shale gas, light tight oil has been assessed. According to our set of criteria - i.e. thermal maturity 0.6-1.2 %vitrinite reflectance (VR; oil) and >1.2 % VR (gas) respectively, organic carbon content > 2%, depth between 500/1000 m and 5000 m as well as a net thickness >20 m - seven potentially generative shale formations were indentified, the most important of them being the Lower Jurassic (Toarcian) Posidonia shale with both shale gas and tight oil potential. The North German basin is by far the most prolific basin. The resource assessment was carried out using a volumetric in-place approach. Variability inherent in the input parameters was accounted for using Monte-Carlo simulations. Technically recoverable resources (TRR) were estimated using recent, production-based recovery factors of North American shale plays and also employing Monte-Carlo simulations. In total, shale gas TRR range between 320 and 2030 bcm and tight oil TRR between 13 and 164 Mio. t in Germany. Tight oil potential is therefore considered minor, whereas the shale gas potential exceeds that of conventional resources by far. Furthermore an overview of numerical transport modelling approaches concerning environmental impacts of the hydraulic fracturing is given. These simulations are based on a representative lithostratigraphy model of the North-German basin, where major shale plays can be expected. Numerical hydrogeological modelling of frac fluid migration in the subsurface has been conducted, as well as stress modelling to estimate frac dimension magnitudes and the potential frequency of induced seismity. The results of these simulations reveal that the probabiltiy of impacts on shallow groundwater by the upward migration of fracking fluids from a deep shale formation through the geological underground in the North German basin is small. BGR 2016 - Schieferöl und Schiefergas in Deutschland - Potenziale und Umweltaspekte, 197p, Hannover, 2016: http://www.bgr.bund.de/DE/Themen/Energie/Downloads/Abschlussbericht_13MB_Schieferoelgaspotenzial_Deutschland_2016.pdf?__blob=publicationFile&v=5.

New blackbody calibration source for low temperatures from -20 C to +350 C

NASA Astrophysics Data System (ADS)

Mester, Ulrich; Winter, Peter

2001-03-01

Calibration procedures for infrared thermometers and thermal imaging systems require radiation sources of precisely known radiation properties. In the physical absence of an ideal Planck's radiator, the German Committee VDI/VDE-GMA FA 2.51, 'Applied Radiation Thermometry', agreed upon desirable specifications and limiting parameters for a blackbody calibration source with a temperature range from -20 degree(s)C to +350 degree(s)C, a spectral range from 2 to 15 microns, an emissivity greater than 0.999 and a useful source aperture of 60 mm, among others. As a result of the subsequent design and development performed with the support of the laboratory '7.31 Thermometry' of the German national institute of natural and engineering sciences (PTB), the Mester ME20 Blackbody Calibration Source is presented. The ME20 meets or exceeds all of the specifications formulated by the VDI/VDE committee.

Development of light and small airplanes

NASA Technical Reports Server (NTRS)

Lachmann, G

1926-01-01

The author has endeavored to select only the most important lines of development and has limited the description of individual airplanes to a few typical examples. Comparisons are presented between German and foreign accomplishments.

Evidence for Diverse Optical Emission from Gamma-Ray Burst Sources

NASA Astrophysics Data System (ADS)

Pedersen, H.; Jaunsen, A. O.; Grav, T.; Østensen, R.; Andersen, M. I.; Wold, M.; Kristen, H.; Broeils, A.; Näslund, M.; Fransson, C.; Lacy, M.; Castro-Tirado, A. J.; Gorosabel, J.; Rodríguez Espinosa, J. M.; Pérez, A. M.; Wolf, C.; Fockenbrock, R.; Hjorth, J.; Muhli, P.; Hakala, P.; Piro, L.; Feroci, M.; Costa, E.; Nicastro, L.; Palazzi, E.; Frontera, F.; Monaldi, L.; Heise, J.

1998-03-01

Optical Transients from gamma-ray burst sources, in addition to offering a distance determination, convey important information about the physics of the emission mechanism, and perhaps also about the underlying energy source. As the gamma-ray phenomenon is extremely diverse, with timescales spanning several orders of magnitude, some diversity in optical counterpart signatures appears plausible. We have studied the optical transient that accompanied the gamma-ray burst of 1997 May 8, GRB 970508. Observations conducted at the 2.5 m Nordic Optical Telescope (NOT) and the 2.2 m telescope at the German-Spanish Calar Alto observatory (CAHA) cover the time interval starting 3 hr 5 minutes to 96 days after the high-energy event. This brackets all other published observations, including radio. When analyzed in conjunction with optical data from other observatories, evidence emerges for a composite light curve. The first interval, from 3 to 8 hr after the event, was characterized by a constant or slowly declining brightness. At a later moment, the brightness started increasing rapidly, and reached a maximum approximately 40 hr after the GRB. From that moment, the GRB brightness decayed approximately as a power law of index -1.21. The last observation, after 96 days, mR = 24.28 +/- 0.10, is brighter than the extrapolated power law, and hints that a constant component, mR = 25.50 +/- 0.40, is present. The optical transient is unresolved (FWHM 0.83") at the faintest magnitude level. The brightness of the optical transient, its duration, and the general shape of the light curve set this source apart from the single other optical transient known, that of the 1997 February 28 event.

Sol-hydrothermal synthesis and optical properties of Eu3+, Tb(3+)-codoped one-dimensional strontium germanate full color nano-phosphors.

PubMed

Lin, Liangwu; Sun, Xinyuan; Jiang, Yao; He, Yuehui

2013-12-21

Novel near-UV and blue excited Eu(3+), Tb(3+)-codoped one dimensional strontium germanate full-color nano-phosphors have been successfully synthesized by a simple sol-hydrothermal method. The morphologies, internal structures, chemical constitution and optical properties of the resulting samples were characterized using FE-SEM, TEM, HRTEM, EDS, XRD, FTIR, XPS, PL and PLE spectroscopy and luminescence decay curves. The results suggested that the obtained Eu(3+), Tb(3+)-codoped strontium germanate nanowires are single crystal nanowires with a diameter ranging from 10 to 80 nm, average diameter of around 30 nm and the length ranging from tens to hundreds micrometers. The results of PL and PLE spectra indicated that the Eu(3+), Tb(3+)-codoped single crystal strontium germanate nanowires showed an intensive blue, blue-green, green, orange and red or green, orange and red light emission under excitation at 350-380 nm and 485 nm, respectively, which may attributed to the coexistent Eu(3+), Eu(2+) and Tb(3+) ions, and the defects located in the strontium germanate nanowires. A possible mechanism of energy transfer among the host, Eu(3+) and Tb(3+) ions was proposed. White-emission can be realized in a single-phase strontium germanate nanowire host by codoping with Tb(3+) and Eu(3+) ions. The Eu(3+), Tb(3+)-codoped one-dimensional strontium germanate full-color nano-phosphors have superior stability under electron bombardment. Because of their strong PL intensity, good CIE chromaticity and stability, the novel 1D strontium germanate full-color nano-phosphors have potential applications in W-LEDs.

Detection and interpretation of seismoacoustic events at German infrasound stations

NASA Astrophysics Data System (ADS)

Pilger, Christoph; Koch, Karl; Ceranna, Lars

2016-04-01

Three infrasound arrays with collocated or nearby installed seismometers are operated by the Federal Institute for Geosciences and Natural Resources (BGR) as the German National Data Center (NDC) for the verification of the Comprehensive Nuclear-Test-Ban Treaty (CTBT). Infrasound generated by seismoacoustic events is routinely detected at these infrasound arrays, but air-to-ground coupled acoustic waves occasionally show up in seismometer recordings as well. Different natural and artificial sources like meteoroids as well as industrial and mining activity generate infrasonic signatures that are simultaneously detected at microbarometers and seismometers. Furthermore, many near-surface sources like earthquakes and explosions generate both seismic and infrasonic waves that can be detected successively with both technologies. The combined interpretation of seismic and acoustic signatures provides additional information about the origin time and location of remote infrasound events or about the characterization of seismic events distinguishing man-made and natural origins. Furthermore, seismoacoustic studies help to improve the modelling of infrasound propagation and ducting in the atmosphere and allow quantifying the portion of energy coupled into ground and into air by seismoacoustic sources. An overview of different seismoacoustic sources and their detection by German infrasound stations as well as some conclusions on the benefit of a combined seismoacoustic analysis are presented within this study.

What I Learned from Being a Beginning Language Student Again

ERIC Educational Resources Information Center

Underwood, Jan

2013-01-01

A 20-year veteran teacher of college Spanish, the author decided to take an intensive First-Year German course during one summer. The author found the German class was not only a great opportunity to acquire another language, but a rich source of insight about the language teaching and the learning process itself. Not only did she take German…

[Comparative evaluation of information products regarding cancer screening of German-speaking cancer organizations].

PubMed

Hofmann, Julia; Kien, Christina; Gartlehner, Gerald

2015-01-01

Evidence-based information materials about the pros and cons of cancer screening are important sources for men and women to decide for or against cancer screening. The aim of this paper was to compare recommendations from different cancer institutions in German-speaking countries (Austria, Germany, and Switzerland) regarding screening for breast, cervix, colon, and prostate cancer and to assess the quality and development process of patient information materials. Relevant information material was identified through web searches and personal contact with cancer institutions. To achieve our objective, we employed a qualitative approach. The quality of 22 patient information materials was analysed based on established guidance by Bunge et al. In addition, we conducted guided interviews about the process of developing information materials with decision-makers of cancer institutes. Overall, major discrepancies in cancer screening recommendations exist among the Austrian, German, and Swiss cancer institutes. Process evaluation revealed that crucial steps of quality assurance, such as assembling a multi-disciplinary panel, assessing conflicts of interest, or transparency regarding funding sources, have frequently not been undertaken. All information materials had substantial quality deficits in multiple areas. Three out of four institutes issued information materials that met fewer than half of the quality criteria. Most patient information materials of cancer institutes in German-speaking countries are fraught with substantial deficits and do not provide an objective source for patients to be able to make an informed decision for or against cancer screening. Copyright © 2015. Published by Elsevier GmbH.

Disinformation squared: was the HIV-from-Fort-Detrick myth a Stasi success?

PubMed

Geissler, Erhard; Sprinkle, Robert Hunt

2013-01-01

When in May 1983 the acquired immunodeficiency syndrome (AIDS) was first securely attributed to a virus, eventually called the human immunodeficiency virus (HIV), many controversies arose. Among these was one centering on HIV's origin. A startling hypothesis, called here the "HIV-from-Fort-Detrick myth," asserted that HIV had been a product, accidental or intentional, of bioweaponry research. While its earliest identifiable contributors were in the West, this myth's most dynamic propagators were in the East. The Soviet security service, the KGB, took "active measures" to create and disseminate AIDS disinformation beginning no later than July 1983 and ending no earlier than October 1987. The East German security service, a complex bureaucracy popularly known as "the Stasi," was involved, too, but how early, how deeply, how uniformly, how ably, and how successfully has not been clear. Following German reunification, claims arose attributing to the Stasi the masterful execution of ingenious elements in a disinformation campaign they helped shape and soon came to dominate. We have tested these claims. Was the HIV-from-Fort-Detrick myth a Stasi success? Primary sources were documents and photographs assembled by the Ministry of State Security (MfS) of the German Democratic Republic (GDR or East Germany), the Ministry of Interior of the People's Republic of Bulgaria, and the United States Department of State; the estate of myth principals Jakob and Lilli Segal; the "AIDS box" in the estate of East German literary figure Stefan Heym; participant-observer recollections, interviews, and correspondence; and expert interviews. We examined secondary sources in light of primary sources. The HIV-from-Fort-Detrick myth had debuted in print in India in 1983 and had been described in publications worldwide prior to 1986, the earliest year for which we found any Stasi document mentioning the myth in any context. Many of the myth's exponents were seemingly independent conspiracy theorists. Its single most creative exponent was Jakob Segal, an idiosyncratic Soviet biologist long resident in, and long retired in, the GDR. Segal applied to the myth a thin but tenacious layer of plausibility. We could not exclude a direct KGB influence on him but found no evidence demonstrating it. The Stasi did not direct his efforts and had difficulty tracking his activities. The Stasi were prone to interpretive error and self-aggrandizement. They credited themselves with successes they did not achieve, and, in one instance, failed to appreciate that a major presumptive success had actually been a fiasco. Senior Stasi officers came to see the myth's propagation as an embarrassment threatening broader interests, especially the GDR's interest in being accepted as a scientifically sophisticated state. In 1986, 1988, and 1989, officers of HV A/X, the Stasi's disinformation and "active measures" department, discussed the myth in meetings with the Bulgarian secret service. In the last of these meetings, HV A/X officers tried to interest their Bulgarian counterparts in taking up, or taking over, the myth's propagation. Further efforts, if any, were obscured by collapse of the East German and Bulgarian governments. No, the HIV-from-Fort-Detrick myth was not a Stasi success. Impressions to the contrary can be attributed to reliance on presumptions, boasts, and inventions. Presumptions conceding to the Stasi an extraordinary operational efficiency and an irresistible competence - qualities we could not confirm in this case - made the boasts and inventions more convincing than their evidentiary basis, had it been known, would have allowed. The result was disinformation about disinformation, a product we call "disinformation squared."

[Improvement of hygiene and the combat of epidemics as Russian state concerns during World War I: Prince Alexander von Oldenburg and the POWs of the Central Powers in Russia].

PubMed

Nachtigal, Reinhard

2004-01-01

When Russia joined the war against the Central Powers in 1914, she immediately faced problems of public health care among the masses of people who were forced to move across far distances in the country: soldiers, refugees, and prisoners of war. Because of poor organisation and the unexpectedly long duration of the war, the POWs fared worst of all war victims in Russia. Subjected to an overstrained military organisation in the rear, the fate of this broadly neglected group illustrates how and with what success Russia strove to meet its deficiencies in administrative structure during wartime. The "Evacuation and Sanitation Section" was put under the command of a member of the Imperial family, Prince Alexander of Oldenburg, a high ranking official of German origin. This amateur scientist and initiator of medical institutions was an energetic and courageous personality who became vital for the fate of millions of POWs in epidemic-stricken Russia. The role of this "silent" ally of the German and Austro-Hungarian governments has hitherto been unknown. Newly found sources in Russian archives now shed an interesting light on a weak spot of Russia's administration and a generally neglected chapter of the history of medicine, the handling of epidemics and of deficits in hygiene.

The German Skills Machine: Sustaining Comparative Advantage in a Global Economy. Policies and Institutions: Germany, Europe, and Transatlantic Relations, Volume 3.

ERIC Educational Resources Information Center

Culpepper, Pepper D., Ed.; Finegold, David, Ed.

This book examines the effectiveness and distributive ramifications of the institutions of German skill provision as they functioned at home in the 1990s and as they served as a template for reform in other industrialized countries. The volume relies on multiple sources of data, including in-firm case studies, larger-scale surveys of companies,…

[Essentials of prevention policy in Germany].

PubMed

Winter, S

2005-05-01

Prevention has become a major task of German health policy. In light of decreasing birth rates and low ages for starting retirement, prevention can contribute to stabilizing the social system by helping to prevent the outburst of diseases, ensure early diagnosis, and facilitate better coping strategies. It can also help to postpone or prevent early retirement and nursing care. To utilize preventive potentials German health policy has initiated the German Forum on Prevention and Health Promotion and a Law on Prevention, which is being negotiated in the German Parliament at present. In order to strengthen prevention, a system will be created that is financed by health, pension, accident and nursing insurance providers together. There will be campaigns, initiation of behavioural changes and setting activities (as required and described by WHO). The system will be controlled by common goals and targets, quality standards and a reporting duty to monitor the efficiency. On the federal level there will be a foundation on prevention and health promotion by the social insurance for the purpose of coordination. The German Forum has existed for 3 years now being a voluntary joint venture of relevant actors in prevention. The aim is to work together and create synergies. At present it is working on four topics: healthy kindergarden and schools, health promotion in firms, healthy aging and organisation and law.

Russian History; A Guide to Reference Sources.

ERIC Educational Resources Information Center

McGill Univ., Montreal (Quebec). McLennan Library.

This guide identifies reference sources for the study of Russian and Soviet history available in the McGill University (Montreal) McLennan Library. Russian, English, French, and German language works covering Russian history from its origins to World War II are included. The guide is arranged in two parts: general reference sources and…

Sources of self-efficacy for physical activity.

PubMed

Warner, Lisa M; Schüz, Benjamin; Wolff, Julia K; Parschau, Linda; Wurm, Susanne; Schwarzer, Ralf

2014-11-01

The effects of self-efficacy beliefs on physical activity are well documented, but much less is known about the origins of self-efficacy beliefs. This article proposes scales to assess the sources of self-efficacy for physical activity aims and to comparatively test their predictive power for physical activity via self-efficacy over time to detect the principal sources of self-efficacy beliefs for physical activity. A study of 1,406 German adults aged 16-90 years was conducted to construct scales to assess the sources of self-efficacy for physical activity (Study 1). In Study 2, the scales' predictive validity for self-efficacy and physical activity was tested in a sample of 310 older German adults. Short, reliable and valid instruments to measure six sources of self-efficacy for physical activity were developed that enable researchers to comparatively test the predictive value of the sources of self-efficacy. The results suggest that mastery experience, self-persuasion, and reduction in negative affective states are the most important predictors of self-efficacy for physical activity in community-dwelling older adults. PsycINFO Database Record (c) 2014 APA, all rights reserved.

The Combined Arms Role of Armored Infantry.

DTIC Science & Technology

1985-01-01

65 This is an especially tempting argument in light of the early recognition of the potential of airpower. There remained in the German Army, however...solutions within the U.S. Army indicate a recognition of the importance of associating selected primary leaders (platoon leader and some squad... speech General Richardson discussed the orientation and employment of the U.S. Army’s new light infantry units. 7. The degradation of infantry skills in

Effects of Language Background on Gaze Behavior: A Crosslinguistic Comparison Between Korean and German Speakers

PubMed Central

Goller, Florian; Lee, Donghoon; Ansorge, Ulrich; Choi, Soonja

2017-01-01

Languages differ in how they categorize spatial relations: While German differentiates between containment (in) and support (auf) with distinct spatial words—(a) den Kuli IN die Kappe stecken (”put pen in cap”); (b) die Kappe AUF den Kuli stecken (”put cap on pen”)—Korean uses a single spatial word (kkita) collapsing (a) and (b) into one semantic category, particularly when the spatial enclosure is tight-fit. Korean uses a different word (i.e., netha) for loose-fits (e.g., apple in bowl). We tested whether these differences influence the attention of the speaker. In a crosslinguistic study, we compared native German speakers with native Korean speakers. Participants rated the similarity of two successive video clips of several scenes where two objects were joined or nested (either in a tight or loose manner). The rating data show that Korean speakers base their rating of similarity more on tight- versus loose-fit, whereas German speakers base their rating more on containment versus support (in vs. auf). Throughout the experiment, we also measured the participants’ eye movements. Korean speakers looked equally long at the moving Figure object and at the stationary Ground object, whereas German speakers were more biased to look at the Ground object. Additionally, Korean speakers also looked more at the region where the two objects touched than did German speakers. We discuss our data in the light of crosslinguistic semantics and the extent of their influence on spatial cognition and perception. PMID:29362644

On the application of light therapy in German-speaking countries.

PubMed

Fischer, Reinhard; Kasper, Siegfried; Pjrek, Edda; Winkler, Dietmar

2012-09-01

Many studies have investigated seasonal affective disorder (SAD; fall-winter-depression) and its treatment with light therapy (LT). However, to the best of our knowledge, no other study has investigated the usage of LT in Europe since 1994. Thus, we performed a survey in hospitals with adult psychiatric departments in German-speaking countries by questionnaire. First, a questionnaire was constructed, considering also recent developments in LT. This questionnaire was sent to all hospitals with adult psychiatric departments listed in the "Deutsches Krankenhaus Adressbuch," which contains hospitals from all German-speaking countries (Germany, Switzerland, and Austria). Non-responders were asked to answer the questionnaire by mail and by phone. We achieved a completion rate of 58%. Data show almost no relevant, non-artificial differences between countries as well as between type of hospital. LT is more frequently used in university and state hospitals than in other types of treatment facilities. Compared to 1994, the major findings are (1) a substantial increase in the use of LT from 13.0 to 69.8% with no differences between Germany, Austria, and Switzerland, (2) this increase is mostly due to treatment for various forms of depression and further possible applications are less often considered, (3) there is a shift in the usage of LT from monotherapy to combination of pharmacotherapy with LT as an adjunctive treatment, and (4) a north-south comparison showed no substantial differences. Considerably higher rates of usage of LT have been found compared to the last survey in German-speaking countries taking place in 1994. Usage almost tripled; however, possible indications for LT other than SAD and non-seasonal depression are not applied to full extent. Further efforts on the propagation of LT should therefore be undertaken, with the same rigorous studies as for pharmacotherapy.

OCA2 splice site variant in German Spitz dogs with oculocutaneous albinism.

PubMed

Caduff, Madleina; Bauer, Anina; Jagannathan, Vidhya; Leeb, Tosso

2017-01-01

We investigated a German Spitz family where the mating of a black male to a white female had yielded three puppies with an unexpected light brown coat color, lightly pigmented lips and noses, and blue eyes. Combined linkage and homozygosity analysis based on a fully penetrant monogenic autosomal recessive mode of inheritance identified a critical interval of 15 Mb on chromosome 3. We obtained whole genome sequence data from one affected dog, three wolves, and 188 control dogs. Filtering for private variants revealed a single variant with predicted high impact in the critical interval in LOC100855460 (XM_005618224.1:c.377+2T>G LT844587.1:c.-45+2T>G). The variant perfectly co-segregated with the phenotype in the family. We genotyped 181 control dogs with normal pigmentation from diverse breeds including 22 unrelated German Spitz dogs, which were all homozygous wildtype. Comparative sequence analyses revealed that LOC100855460 actually represents the 5'-end of the canine OCA2 gene. The CanFam 3.1 reference genome assembly is incorrect and separates the first two exons from the remaining exons of the OCA2 gene. We amplified a canine OCA2 cDNA fragment by RT-PCR and determined the correct full-length mRNA sequence (LT844587.1). Variants in the OCA2 gene cause oculocutaneous albinism type 2 (OCA2) in humans, pink-eyed dilution in mice, and similar phenotypes in corn snakes, medaka and Mexican cave tetra fish. We therefore conclude that the observed oculocutaneous albinism in German Spitz is most likely caused by the identified variant in the 5'-splice site of the first intron of the canine OCA2 gene.

Investigations on the prevalence of the photo-induced sneezing reflex in the German population, a representative cross-sectional study.

PubMed

Kulas, Philipp; Hecker, Dietmar; Schick, Bernhard; Bozzato, Alessandro

2017-03-01

The sneezing reflex is a common phenomenon in human beings and animals. Until now largely uninvestigated sneezing phenomenon is the photic sneeze reflex, also known as the ACHOO (Autosomal Cholinergic Helio-Ophtalmologic Outburst). This light induced sneezing reflex is triggered by a bright light like the sun but also by artificial light. In former publications the prevalence of this phenomenon in the population is specified up to 35 % and can result in a potential endangerment in numerous everyday situations as driving a car or controlling an airplane. In our present study we interviewed 1042 patients in the Department of Otorhinolaryngology of the Saarland University Hospital using standardized questionnaires to analyse epidemiological data as age, gender and known diseases. Additionally, the questionnaire focused on the occurrence of sneezing events, extend of sneezing, potential triggers, and methods of evasion. In our data analysis, we were able to show a high prevalence of the ACHOO in 57 % of our cohort, suffering from regular light induced sneezing events. Excluding subjects reporting only occasional sneezing events our results were comparable to findings in literature. As expected a familial disposition was observed, additionally tobacco smoking correlated with light induced sneezing events. Analyzing a large cohort, we were able to demonstrate that the prevalence of the ACHOO in the german population may be higher than expected. Taken into account the potential hazard caused by this phenomenon, further investigations should identify the pathophysiologic pathway.

Profiling of Saharan dust from the Caribbean to western Africa - Part 2: Shipborne lidar measurements versus forecasts

NASA Astrophysics Data System (ADS)

Ansmann, Albert; Rittmeister, Franziska; Engelmann, Ronny; Basart, Sara; Jorba, Oriol; Spyrou, Christos; Remy, Samuel; Skupin, Annett; Baars, Holger; Seifert, Patric; Senf, Fabian; Kanitz, Thomas

2017-12-01

A unique 4-week ship cruise from Guadeloupe to Cabo Verde in April-May 2013 see part 1, Rittmeister et al. (2017) is used for an in-depth comparison of dust profiles observed with a polarization/Raman lidar aboard the German research vessel Meteor over the remote tropical Atlantic and respective dust forecasts of a regional (SKIRON) and two global atmospheric (dust) transport models (NMMB/BSC-Dust, MACC/CAMS). New options of model-observation comparisons are presented. We analyze how well the modeled fine dust (submicrometer particles) and coarse dust contributions to light extinction and mass concentration match respective lidar observations, and to what extent models, adjusted to aerosol optical thickness observations, are able to reproduce the observed layering and mixing of dust and non-dust (mostly marine) aerosol components over the remote tropical Atlantic. Based on the coherent set of dust profiles at well-defined distances from Africa (without any disturbance by anthropogenic aerosol sources over the ocean), we investigate how accurately the models handle dust removal at distances of 1500 km to more than 5000 km west of the Saharan dust source regions. It was found that (a) dust predictions are of acceptable quality for the first several days after dust emission up to 2000 km west of the African continent, (b) the removal of dust from the atmosphere is too strong for large transport paths in the global models, and (c) the simulated fine-to-coarse dust ratio (in terms of mass concentration and light extinction) is too high in the models compared to the observations. This deviation occurs initially close to the dust sources and then increases with distance from Africa and thus points to an overestimation of fine dust emission in the models.

Characteristics and external validity of the German Health Risk Institute (HRI) Database.

PubMed

Andersohn, Frank; Walker, Jochen

2016-01-01

The aim of this study was to describe characteristics and external validity of the German Health Risk Institute (HRI) Database. The HRI Database is an anonymized healthcare database with longitudinal data from approximately six Mio Germans. In addition to demographic information (gender, age, region of residence), data on persistence of insurants over time, hospitalization rates, mortality rates and drug prescription rates were extracted from the HRI database for 2013. Corresponding national reference data were obtained from official sources. The proportion of men and women was similar in the HRI Database and Germany, but the database population was slightly younger (mean 40.4 vs 43.7 years). The proportion of insurants living in the eastern part of Germany was lower in the HRI Database (10.1% vs 19.7%). There was good accordance to German reference data with respect to hospitalization rates, overall mortality rate and prescription rates for the 20 most often reimbursed drug classes, with the overall burden of morbidity being slightly lower in the HRI database. From insurants insured on 1 January 2009 (N = 6.2 Mio), a total of 70.6% survived and remained continuously insured with the same statutory health insurance until 31 December 2013. This proportion increased to 77.5% if only insurants ≥40 years were considered. There was good overall accordance of the HRI database and the German population in terms of measures of morbidity, mortality and drug usage. Persistence of insurants with the database over time was high, indicating suitability of the data source for longitudinal epidemiological analyses. Copyright © 2015 John Wiley & Sons, Ltd.

JPRS Report, Science and Technology: Europe, German Aerospace Industry Competitiveness.

DTIC Science & Technology

1991-05-31

construction , in which the German aerospace industry is involved (Alpha Jet, Tornado, Jaeger 90), are not directly transferable, since they deal with...INTA 1,500 100 Japan NASDA 938 749 U.S. NASA 23,0003 7,653 1. Planned after completion of construction phase (cun mately 100) 2. Annual average...for five-year construction phase 3. Excluding contractors rently approxi- Source: DLR, DASA III.5 Fiscal Aspects, Subsidies Taxes and duties affect

VizieR Online Data Catalog: 5 exoplanet light and RV curves (Mancini+, 2018)

NASA Astrophysics Data System (ADS)

Mancini, L.; Esposito, M.; Covino, E.; Southworth, J.; Biazzo, K.; Bruni, I.; Ciceri, S.; Evans, D.; Lanza, A. F.; Poretti, E.; Sarkis, P.; Smith, A. M. S.; Brogi, M.; Affer, L.; Benatti, S.; Bignamini, A.; Boccato, C.; Bonomo, A. S.; Borsa, F.; Carleo, I.; Claudi, R.; Cosentino, R.; Damasso, M.; Desidera, S.; Giacobbe, P.; Gonzalez-Alvarez, E.; Gratton, R.; Harutyunyan, A.; Leto, G.; Maggio, A.; Malavolta, L.; Maldonado, J.; Martinez-Fiorenzano, A.; Masiero, S.; Micela, G.; Molinari, E.; Nascimbeni, V.; Pagano, I.; Pedani, M.; Piotto, G.; Rainer, M.; Scandariato, G.; Smareglia, R.; Sozzetti, A.; Andreuzzi, G.; Henning, T.

2018-02-01

Radial velocity measurements of HAT-P-3, HAT-P-12, HAT-P-22, WASP-39, and WASP-60 obtained with HARPS-N at the 3.5m TNG telescope. Light curves of transit events of the extrasolar planet HAT-P-3b, HAT-P-12b and WASP-60b. Two of the datasets were obtained using the Cassini 1.52m Telescope (Gunn r and Gunn i) at the Astronomical Observatory of Bologna in Loiano (Italy). Ten of the datasets were obtained using the Zeiss 1.23m telescope (Cousins R and Cousins I) at the German-Spanish Astronomical Centre at Calar Alto (Spain). Four of the datasets were obtained using the 2.2m telescope (Stromgren u, Gunn g, Gunn r, Johnson I) at the German-Spanish Astronomical Centre at Calar Alto (Spain). One of the datasets was obtained using the 2.5m Isaac Newton Telescope (INT) in La Palma (Spain). (4 data files).

Assessment of grid optimisation measures for the German transmission grid using open source grid data

NASA Astrophysics Data System (ADS)

Böing, F.; Murmann, A.; Pellinger, C.; Bruckmeier, A.; Kern, T.; Mongin, T.

2018-02-01

The expansion of capacities in the German transmission grid is a necessity for further integration of renewable energy sources into the electricity sector. In this paper, the grid optimisation measures ‘Overhead Line Monitoring’, ‘Power-to-Heat’ and ‘Demand Response in the Industry’ are evaluated and compared against conventional grid expansion for the year 2030. Initially, the methodical approach of the simulation model is presented and detailed descriptions of the grid model and the used grid data, which partly originates from open-source platforms, are provided. Further, this paper explains how ‘Curtailment’ and ‘Redispatch’ can be reduced by implementing grid optimisation measures and how the depreciation of economic costs can be determined considering construction costs. The developed simulations show that the conventional grid expansion is more efficient and implies more grid relieving effects than the evaluated grid optimisation measures.

Do the media provide transparent health information? A cross-cultural comparison of public information about the HPV vaccine.

PubMed

Bodemer, Nicolai; Müller, Stephanie M; Okan, Yasmina; Garcia-Retamero, Rocio; Neumeyer-Gromen, Angela

2012-05-28

The media is a powerful tool for informing the public about health treatments. In particular, the Internet has gained importance as a widely valued source for health information for parents and adolescents. Nonetheless, traditional sources, such as newspapers, continue to report on health innovations. But do websites and newspaper reports provide balanced information? We performed a systematic media analysis to evaluate and compare media coverage of the human papillomavirus (HPV) vaccine on websites and in newspapers in Germany and Spain. We assessed to what extent the media provide complete (pros and cons), transparent (absolute instead of relative numbers), and correct information about the epidemiology and etiology of cervical cancer as well as the effectiveness and costs of the HPV vaccine. As a basis for comparison, a facts box containing current scientific evidence about cervical cancer and the HPV vaccine was developed. The media analysis included 61 websites and 141 newspaper articles in Germany, and 41 websites and 293 newspaper articles in Spain. Results show that 57% of German websites and 43% of German newspaper reports communicated correct estimates of epidemiological data, whereas in Spain 39% of the websites and 20% of the newspaper did so. While two thirds of Spanish websites explicitly mentioned causes of cervical cancer as well as spontaneous recovery, German websites communicated etiological information less frequently. Findings reveal that correct estimates about the vaccine's effectiveness were mentioned in 10% of German websites and 6% of German newspaper reports; none of the Spanish newspaper reports and 2% of Spanish websites reported effectiveness correctly. Only German websites (13%) explicitly referred to scientific uncertainty regarding the vaccine's evaluation. We conclude that the media lack balanced reporting on the dimensions completeness, transparency, and correctness. We propose standards for more balanced reporting on websites and in newspapers. Copyright © 2012 Elsevier Ltd. All rights reserved.

Incidence of the Recently Described Sulfonamide Resistance Gene sul3 among German Salmonella enterica Strains Isolated from Livestock and Food

PubMed Central

Guerra, Beatriz; Junker, Ernst; Helmuth, Reiner

2004-01-01

The sul3 gene recently described in Escherichia coli was found in 22 of 512 (4.3%) German Salmonella isolates from different regions and sources and of different serotypes, antimicrobial resistance phenotypes, and genomic groups. This is the first report on the prevalence of sul3 among Salmonella strains, and the findings support the strong potential of this determinant to spread within bacterial populations. PMID:15215132

Germany's Failure to Achieve an Atomic Bomb in World War II: Bad Science,Good Intentions or Neither?

NASA Astrophysics Data System (ADS)

Lustig, Harry

2004-05-01

This is a progress report on a project to find a definitive answer to the disputed question why the Germans did not succeed in building an atomic bomb. The most extreme answers among those that have been put forward are, on the one hand, that Werner Heisenberg did not understand the difference between a nuclear reactor and a bomb and, on the other, that German scientists dragged their feet because they wanted to deny this weapon of mass destruction to Hitler. From an examination of a number of the German scientific reports on their Uranium Project and of other sources, it seems evident that any early idea of a bomb being a run-away reactor was soon replaced by the realization that a bomb required fast neutrons and close to pure uranium 235. As for the hypothesis that the scruples of German scientists played a significant role in preventing a German atomic bomb, the available records appear to negate that explanation as well. Rather, the minuscule resources devoted to the project, the lack of German industrial capacity, the poorly organized and decentralized organization of the research, and the modus operandi of researchers, including Heisenberg, of simultaneously pursuing other interests, doomed the prospect of getting a bomb.

Technological Advances and the Study of Reading.

ERIC Educational Resources Information Center

Henk, William A.

Recent technological advances in neuroanatomy and neurophysiology have unearthed structural and functional patterns in the brain that can be associated with severe reading disabilities. As a response, this paper examines several computer-driven technologies whose capabilities shed light on brain-related issues germane to reading, with the intent…

Exploring Sources of Punitiveness among German Citizens

ERIC Educational Resources Information Center

Cochran, Joshua C.; Piquero, Alex R.

2011-01-01

Prior research examining punitive attitudes has typically focused on the United States and citizens' support for the death penalty or American "get-tough" criminal policies. Yet, little is known as to how punitive attitudes and their sources vary internationally. Using Germany as a case study, this article expands the scope of…

Biographical Sources: Architecture, Art, Music, Theatre and Drama. Bibliographic Series No. 16.

ERIC Educational Resources Information Center

Ahrens, Joan

Sources for biographical information in architecture, art, music, theater, and drama held by the Arkansas University library are listed. Directories, encyclopedias, biographies, bibliographies, and handbooks covering the national and international spectrum are organized by topic, and include some works in French and German. Full bibliographic…

Bullying Perpetration and Victimization in Special Education: A Review of the Literature

ERIC Educational Resources Information Center

Rose, Chad A.; Monda-Amaya, Lisa E.; Espelage, Dorothy L.

2011-01-01

Bullying perpetration and victimization have become pervasive problems in American schools. Recent research suggests a causal association between prolonged periods of victimization and overt acts of school violence. These findings are germane to students with disabilities in light of evidence suggesting these students are victimized more often…

New Ways to Learn a Foreign Language.

ERIC Educational Resources Information Center

Hall, Robert A., Jr.

This text focuses on the nature of language learning in the light of modern linguistic analysis. Common linguistic problems encountered by students of eight major languages are examined--Latin, Greek, French, Spanish, Portuguese, Italian, German, and Russian. The text discusses the nature of language, building new language habits, overcoming…

The 'Book of Life' in the press: comparing German and Irish media discourse on human genome research.

PubMed

O'Mahony, Patrick; Schäfer, Mike Steffen

2005-02-01

The essay compares German and Irish media coverage of human genome research in the year 2000, using qualitative and quantitative frame analysis of a print media corpus. Drawing from a media-theoretical account of science communication, the study examines four analytic dimensions: (1) the influence of global and national sources of discourse; (2) the nature of elaboration on important themes; (3) the extent of societal participation in discourse production; (4) the cultural conditions in which the discourse resonates. The analysis shows that a global discursive package, emphasizing claims of scientific achievement and medical progress, dominates media coverage in both countries. However, German coverage is more extensive and elaborate, and includes a wider range of participants. Irish coverage more often incorporates the global package without further elaboration. These finding indicate that the global package is 'localized' differently due to national patterns of interests, German participation in human genome research, traditions of media coverage, and the domestic resonance of the issue.

[Max Planck--an adversary of Christianity? The debate about Planck's attitude towards religion after World War II].

PubMed

Löhr, Gebhard

2012-03-01

The article discusses a debate which unfolded in the early 1950s and 1960s between East German Marxist philosophers and historians of science and West German theologians and scientists. The subject treated was the attitude towards religion of famous physicist Max Planck who had died a few years earlier, in 1947. The article analyses the different positions of the contributors, mainly with a view to developing a categorial framework usable in descriptions and analyses of the religious attitudes of natural scientists. Moreover the different stages of the debate are outlined in order to exhibit their connections to the larger historical context, i.e. the unfolding of the cold war. In the light of this the debate can be regarded as a religious or ideological war, albeit a cold one, on German soil, which fortunately did not escalate into a hot conflict. It ended, as can be illustrated in a late contribution to the debate, with the collapse of the GDR in 1989 or shortly thereafter.

Shaded Relief Image of Saint Pierre and Miquelon

NASA Technical Reports Server (NTRS)

2000-01-01

This image shows two islands, Miquelon and Saint Pierre, located south of Newfoundland, Canada. These islands, along with five smaller islands, are a self-governing territory of France. A thin barrier beach divides Miquelon, with Grande Miquelon to the north and Petite Miquelonto the south. Saint Pierre Island is located to the lower right. With the islandsi location in the north Atlantic Ocean and their deep water ports, fishing is the major part of the economy. The maximum elevation of the island is 240 meters (787 feet). The land mass of the islands is about 242 square kilometers, or 1.5 times the size of Washington DC.

This shaded relief image was generated using topographic data from the Shuttle Radar Topography Mission. A computer-generated artificial light source illuminates the elevation data to produce a pattern of light and shadows. Slopes facing the light appear bright, while those facing away are shaded. On flatter surfaces, the pattern of light and shadows can reveal subtle features in the terrain. Shaded relief maps are commonly used in applications such as geologic mapping and land use planning.

This image was acquired by the Shuttle Radar Topography Mission (SRTM) aboard the Space Shuttle Endeavour, launched on February 11, 2000. SRTM uses the same radar instrument that comprised the Spaceborne Imaging Radar-C/X-Band Synthetic Aperture Radar (SIR-C/X-SAR) that flew twice on the Space Shuttle Endeavour in 1994. The mission is designed to collect three-dimensional measurements of the Earth's surface. To collect the 3-D data, engineers added a 60-meter-long (200-foot) mast, installed additional C-band and X-band antennas, and improved tracking and navigation devices. The mission is a cooperative project between the National Aeronautics and Space Administration (NASA), the National Imagery and Mapping Agency (NIMA) of the U.S. Department of Defense (DoD), and the German and Italian space agencies. It is managed by NASAis Jet Propulsion Laboratory, Pasadena, CA, for NASA1s Earth Science Enterprise, Washington, DC.nal measurements of the Earth's surface. To collect the 3-D data, engineers added a 60-meter-long (200-foot) mast, installed additional C-band and X-band antennas, and improved tracking and navigation devices. The mission is a cooperative project between the National Aeronautics and Space Administration (NASA), the National Imagery and Mapping Agency (NIMA) of the U.S. Department of Defense (DoD), and the German and Italian space agencies. It is managed by NASA's Jet Propulsion Laboratory, Pasadena, CA, for NASA's Earth Science Enterprise, Washington, DC.

Foreign Language Children's Books for Fun, with a List of Sources.

ERIC Educational Resources Information Center

Perritt, Patsy H.

This paper attempts to identify and explore multiple lists of recommended books, sources of book reviews, and names of commercial supplies, both foreign and domestic, of foreign language children's books. The languages explored were Spanish, French, German, and Italian. A list of United States publishers, distributors, and dealers in foreign…

OLED lighting devices having multi element light extraction and luminescence conversion layer

DOEpatents

Krummacher, Benjamin Claus; Antoniadis, Homer

2010-11-16

An apparatus such as a light source has a multi element light extraction and luminescence conversion layer disposed over a transparent layer of the light source and on the exterior of said light source. The multi-element light extraction and luminescence conversion layer includes a plurality of light extraction elements and a plurality of luminescence conversion elements. The light extraction elements diffuses the light from the light source while luminescence conversion elements absorbs a first spectrum of light from said light source and emits a second spectrum of light.

Applications of atom interferometry - from ground to space

NASA Astrophysics Data System (ADS)

Schubert, Christian; Rasel, Ernst Maria; Gaaloul, Naceur; Ertmer, Wolfgang

2016-07-01

Atom interferometry is utilized for the measurement of rotations [1], accelerations [2] and for tests of fundamental physics [3]. In these devices, three laser light pulses separated by a free evolution time coherently manipulate the matter waves which resembles the Mach-Zehnder geometry in optics. Atom gravimeters demonstrated an accuracy of few microgal [2,4], and atom gradiometers showed a noise floor of 30 E Hz^{-1/2} [5]. Further enhancements of atom interferometers are anticipated by the integration of novel source concepts providing ultracold atoms, extending the free fall time of the atoms, and enhanced techniques for coherent manipulation. Sources providing Bose-Einstein condensates recently demontrated a flux compatible with precision experiments [6]. All of these aspects are studied in the transportable quantum gravimeter QG-1 and the very long baseline atom interferometry teststand in Hannover [7] with the goal of surpassing the microgal regime. Going beyond ground based setups, the QUANTUS collaboration exploits the unique features of a microgravity environment in drop tower experiments [8] and in a sounding rocket mission. The payloads are compact and robust atom optics experiments based on atom chips [6], enabling technology for transportable sensors on ground as a byproduct. More prominently, they are pathfinders for proposed satellite missions as tests of the universality of free fall [9] and gradiometry based on atom interferometers [10]. This work is supported by the German Space Agency (DLR) with funds provided by the Federal Ministry for Economic Affairs and Energy (BMWi) due to an enactment of the German Bundestag under grant numbers DLR 50WM1552-1557 (QUANTUS-IV-Fallturm) and by the Deutsche Forschungsgemeinschaft in the framework of the SFB 1128 geo-Q. [1] PRL 114 063002 2015 [2] Nature 400 849 1999 [3] PRL 112 203002 2014 [4] NJP 13 065026 2011 [5] PRA 65 033608 2002 [6] NJP 17 065001 2015 [7] NJP 17 035011 2015 [8] PRL 110 093602 2013 [9] CQG 31 115010 2014 [10] MST 26 139 2014.

[Substance monograph on bisphenol A (BPA) - reference and human biomonitoring (HBM) values for BPA in urine. Opinion of the Human Biomonitoring Commission of the German Federal Environment Agency (UBA)].

PubMed

2012-09-01

Bisphenol A (BPA) is used for the production of polycarbonates and synthetic resins. Many of the items that contain BPA, for example polycarbonate bottles and coated cans, are commodities from which BPA can migrate into food and drinks, resulting in ubiquitous exposure of the population. Numerous animal studies and in vitro tests have shown that BPA acts as an "endocrine disruptor". Because of the still incomplete understanding of the complex and contradictory effects of BPA at doses below the NOAEL, the toxicological significance of recent findings is uncertain. The German HBM Commission takes notice that the risk assessment is currently in flux and that in the EU and other countries precautionary bans on BPA have been introduced. In the light of the extensive and growing body of literature, the Commission does not see itself in a position to resolve this controversy, nor to answer the question of the relevance of observed effects of low BPA doses on human health. The Commission has derived reference values (RV95) and TDI-based HBM I values for total BPA in urine. The RV95 values are 30 μg/l for 3-5 year olds, 15 μg/l for 6-14 year olds, and 7 μg/l for 20-29 year olds. The HBM I value for children is 1.5 mg/l and 2.5 mg/l for adults, respectively. The Commission emphasizes that the HBM values will require immediate adjustment should the current TDI of 0.05 mg/kg bw/day be changed. For the practical application of HBM, the Commission recommends an assessment based on the RV95. Confirmed exceedance of the RV95 by repeat measurements should prompt a search for the possible source(s), following the ALARA principle.

Light and Laser Modalities in the Treatment of Cutaneous Sarcoidosis: A Systematic Review.

PubMed

Lima, Ana Luiza; Goetze, Steven; Illing, Tanja; Elsner, Peter

2018-04-27

Sarcoidosis is a systemic non-caseating granulomatous disease of unknown aetiology. Cutaneous manifestations are present in approximately 10-30% of the patients with the systemic form. Therapy is indicated in case of disabling symptoms, organ dysfunction or cosmetically distressing manifestation. Despite different therapeutic possibilities, cutaneous sarcoidosis remains exceptionally difficult to treat. Light and laser therapy may be a promising alternative. In this systematic review, we summarised the available treatments according to the literature concerning light and laser therapy for cutaneous sarcoidosis. Publications written in English and German, published between January 1990 and July 2016 in the database PubMed, MEDLINE, Embase, and Scopus were analysed. Light therapy with intense pulsed light, photodynamic therapy, and ultraviolet A light therapy, as well as laser therapy with pulsed dye laser, YAG laser, and Q-switched ruby laser were described. The results are based on individual case reports and small case series. Randomised controlled studies are lacking.

The Practice of Professional Doctorates: The Case of a U.K.-Based Distance DBA

ERIC Educational Resources Information Center

Simpson, Colin; Sommer, Daniela

2016-01-01

In light of the prominent role of socio-materiality in contemporary social scientific, and particularly educational research, this article uses two practice-based theories to investigate the experiences of German business management professionals on a U.K.-based DBA delivered in Germany. We specifically take concepts from cultural historical…

Planning Sign Languages: Promoting Hearing Hegemony? Conceptualizing Sign Language Standardization

ERIC Educational Resources Information Center

Eichmann, Hanna

2009-01-01

In light of the absence of a codified standard variety in British Sign Language and German Sign Language ("Deutsche Gebardensprache") there have been repeated calls for the standardization of both languages primarily from outside the Deaf community. The paper is based on a recent grounded theory study which explored perspectives on sign…

Social Pedagogical Work with Different Age Groups in Germany

ERIC Educational Resources Information Center

Toporkova, Olga; Glebova, Ekaterina; Vysotskaia, Inna V.; Tikhaeva, Victoria V.

2016-01-01

Background/Objectives: The main objective of the article is to study, analyze and organize the modern German experience in the sphere of social pedagogical and educational work with socially unprotected adults, including youth and the elderly. The retrospective analysis threw light on the background of work with socially unprotected adults in…

On the Syntax/Semantics of Korean Nominal Particles

ERIC Educational Resources Information Center

Chung, Han-Byul

2016-01-01

In this dissertation, I investigate the structural positions of "i/ka"-marked DPs and "un/nun"-marked DPs in the light of Kratzer (1988; 1995) and Diesing (1990; 1992). In Korean, unlike German (and English in part), vP-external subjects and vP-internal subjects are not distinguishable at the surface. However, by adopting…

Device structure for OLED light device having multi element light extraction and luminescence conversion layer

DOEpatents

Antoniadis,; Homer, Krummacher [Mountain View, CA; Claus, Benjamin [Regensburg, DE

2008-01-22

An apparatus such as a light source has a multi-element light extraction and luminescence conversion layer disposed over a transparent layer of the light source and on the exterior of said light source. The multi-element light extraction and luminescence conversion layer includes a plurality of light extraction elements and a plurality of luminescence conversion elements. The light extraction elements diffuses the light from the light source while luminescence conversion elements absorbs a first spectrum of light from said light source and emits a second spectrum of light.

After the fall of the Berlin Wall: perceptions and consequences of stability and change among middle-aged and older East and West Germans.

PubMed

Westerhof, Gerben J; Keyes, Corey L M

2006-09-01

This study empirically tested the self-systems theory of subjective change in light of the rapid change after the fall of the Berlin Wall. The theory predicts that individuals have a tendency to perceive stability and that perceived stability exerts a strong positive effect on subjective well-being. We would expect perceptions of decline and, to a lesser extent, perceptions of improvement to be related to lower levels of subjective well-being. Data were from respondents aged 40-85 years who participated in the German Aging Survey. We used measures of well-being and temporal comparisons during the past 10 years (1986-1996). West Germans reported more stability than East Germans, in particular in the public domain and in older age groups. Compared with perceptions of stability, perceptions of decline were related to less life satisfaction and more negative affect, and perceptions of growth to more negative affect. Temporal comparisons were unrelated to positive affect. Our findings both confirm and reject the self-systems theory of subjective change as it relates to the fall of the Berlin Wall. Studying temporal comparisons is important in understanding the effects of historical events and their timing within an individual life course.

[Palliative medicine content in German-language medical textbooks].

PubMed

Becker, G; Dausch, V; Xander, C; Olschewski, M; Momm, F; Blum, H E

2007-02-09

There is a need for improved end-of-life care, especially in the light of demographic changes with an increased incidence of cancer. Although medical textbooks are central to the training of medical students and also serve as a reference for more experienced clinicians, only few data exist on the extent to which medical textbooks address end-of-life care. We analysed the quantity and quality of information on end-of-life care given in German textbooks on different medical disciplines. 26 top-selling German medical textbooks were analysed for the presentation of end-of-life care in chapters that address the 13 most common causes of death worldwide In the 159 chapters analysed for information on traditional topics, like risk factors or early diagnosis (group A), such information was provided in 52% compared with only 9% on end-of-life topics, such as symptom management or manner of death (group B) (p=0.0001). There was no statistically significant difference between the different medical specialities (p=0.22). Line-by-line analysis showed that the phrase death or related terms was mentioned in only 57 of 159 chapters dealing with the most common causes of death worldwide. The top-selling German textbooks that were analysed generally offer little helpful information on end-of-life care of patients.

Auditory-Motor Rhythms and Speech Processing in French and German Listeners

PubMed Central

Falk, Simone; Volpi-Moncorger, Chloé; Dalla Bella, Simone

2017-01-01

Moving to a speech rhythm can enhance verbal processing in the listener by increasing temporal expectancies (Falk and Dalla Bella, 2016). Here we tested whether this hypothesis holds for prosodically diverse languages such as German (a lexical stress-language) and French (a non-stress language). Moreover, we examined the relation between motor performance and the benefits for verbal processing as a function of language. Sixty-four participants, 32 German and 32 French native speakers detected subtle word changes in accented positions in metrically structured sentences to which they previously tapped with their index finger. Before each sentence, they were cued by a metronome to tap either congruently (i.e., to accented syllables) or incongruently (i.e., to non-accented parts) to the following speech stimulus. Both French and German speakers detected words better when cued to tap congruently compared to incongruent tapping. Detection performance was predicted by participants' motor performance in the non-verbal cueing phase. Moreover, tapping rate while participants tapped to speech predicted detection differently for the two language groups, in particular in the incongruent tapping condition. We discuss our findings in light of the rhythmic differences of both languages and with respect to recent theories of expectancy-driven and multisensory speech processing. PMID:28443036

Photofraction of a 5 cm x 2 cm BGO scintillator. [bismuth germanate crystal for use in cosmic gamma ray detector

NASA Technical Reports Server (NTRS)

Dunphy, P. P.; Forrest, D. J.

1985-01-01

The photofraction of a 5.1 cm x 2.0 cm bismuth germanate (BGO) scintillator was measured over a gamma-ray energy range of 0.2 to 6.1 MeV. Several methods, used to minimize the effect of room scattering on the measurement, are discussed. These include a gamma-gamma coincidence technique, a beta-gamma coincidence technique, and the use of sources calibrated with a standard 7.6 cm x 7.6 cm sodium iodide scintillator.

Backscatter absorption gas imaging systems and light sources therefore

DOEpatents

Kulp, Thomas Jan [Livermore, CA; Kliner, Dahv A. V. [San Ramon, CA; Sommers, Ricky [Oakley, CA; Goers, Uta-Barbara [Campbell, NY; Armstrong, Karla M [Livermore, CA

2006-12-19

The location of gases that are not visible to the unaided human eye can be determined using tuned light sources that spectroscopically probe the gases and cameras that can provide images corresponding to the absorption of the gases. The present invention is a light source for a backscatter absorption gas imaging (BAGI) system, and a light source incorporating the light source, that can be used to remotely detect and produce images of "invisible" gases. The inventive light source has a light producing element, an optical amplifier, and an optical parametric oscillator to generate wavelength tunable light in the IR. By using a multi-mode light source and an amplifier that operates using 915 nm pump sources, the power consumption of the light source is reduced to a level that can be operated by batteries for long periods of time. In addition, the light source is tunable over the absorption bands of many hydrocarbons, making it useful for detecting hazardous gases.

Driver circuit for solid state light sources

DOEpatents

Palmer, Fred; Denvir, Kerry; Allen, Steven

2016-02-16

A driver circuit for a light source including one or more solid state light sources, a luminaire including the same, and a method of so driving the solid state light sources are provided. The driver circuit includes a rectifier circuit that receives an alternating current (AC) input voltage and provides a rectified AC voltage. The driver circuit also includes a switching converter circuit coupled to the light source. The switching converter circuit provides a direct current (DC) output to the light source in response to the rectified AC voltage. The driver circuit also includes a mixing circuit, coupled to the light source, to switch current through at least one solid state light source of the light source in response to each of a plurality of consecutive half-waves of the rectified AC voltage.

Position Index for the Matrix Light Source

NASA Astrophysics Data System (ADS)

Takahashi, Hiroshi; Kobayashi, Yoshinori; Onda, Shou; Irikura, Takashi

It is expected that in the future white LEDs will be widely used in practical applications including replacing conventional lighting in offices and homes. The white LED light source of matrix arrangement is also considered in it. On the other hand, although now the unified glare rating (UGR) is widely used for evaluation of the discomfort glare of the interior lighting, UGR is a thing for a uniform light source, and its application to the matrix light sources that have non-uniform luminance has not been considered. The aim of this study is to clarify the position index which is one of element of UGR for the matrix light source. In this case, to apply the position index for a matrix light source to UGR, the concept of the revised position index is invented. As the preliminary experiment, method for measuring the position index was conducted, and as the experiment, position index for the matrix light source was conducted and compared with the uniform light source. The results of the experiments show that the position index is decided by the relative angle between line of sight and light source. It is also found that the matrix light source have larger position index than uniform light source. Furthermore, it is shown that the discomfort glare caused by a matrix light source can be evaluated by applying the revised position index to the UGR.

Genomic epidemiology of the Escherichia coli O104:H4 outbreaks in Europe, 2011.

PubMed

Grad, Yonatan H; Lipsitch, Marc; Feldgarden, Michael; Arachchi, Harindra M; Cerqueira, Gustavo C; Fitzgerald, Michael; Godfrey, Paul; Haas, Brian J; Murphy, Cheryl I; Russ, Carsten; Sykes, Sean; Walker, Bruce J; Wortman, Jennifer R; Young, Sarah; Zeng, Qiandong; Abouelleil, Amr; Bochicchio, James; Chauvin, Sara; Desmet, Timothy; Gujja, Sharvari; McCowan, Caryn; Montmayeur, Anna; Steelman, Scott; Frimodt-Møller, Jakob; Petersen, Andreas M; Struve, Carsten; Krogfelt, Karen A; Bingen, Edouard; Weill, François-Xavier; Lander, Eric S; Nusbaum, Chad; Birren, Bruce W; Hung, Deborah T; Hanage, William P

2012-02-21

The degree to which molecular epidemiology reveals information about the sources and transmission patterns of an outbreak depends on the resolution of the technology used and the samples studied. Isolates of Escherichia coli O104:H4 from the outbreak centered in Germany in May-July 2011, and the much smaller outbreak in southwest France in June 2011, were indistinguishable by standard tests. We report a molecular epidemiological analysis using multiplatform whole-genome sequencing and analysis of multiple isolates from the German and French outbreaks. Isolates from the German outbreak showed remarkably little diversity, with only two single nucleotide polymorphisms (SNPs) found in isolates from four individuals. Surprisingly, we found much greater diversity (19 SNPs) in isolates from seven individuals infected in the French outbreak. The German isolates form a clade within the more diverse French outbreak strains. Moreover, five isolates derived from a single infected individual from the French outbreak had extremely limited diversity. The striking difference in diversity between the German and French outbreak samples is consistent with several hypotheses, including a bottleneck that purged diversity in the German isolates, variation in mutation rates in the two E. coli outbreak populations, or uneven distribution of diversity in the seed populations that led to each outbreak.

Genomic epidemiology of the Escherichia coli O104:H4 outbreaks in Europe, 2011

PubMed Central

Grad, Yonatan H.; Lipsitch, Marc; Feldgarden, Michael; Arachchi, Harindra M.; Cerqueira, Gustavo C.; FitzGerald, Michael; Godfrey, Paul; Haas, Brian J.; Murphy, Cheryl I.; Russ, Carsten; Sykes, Sean; Walker, Bruce J.; Wortman, Jennifer R.; Young, Sarah; Zeng, Qiandong; Abouelleil, Amr; Bochicchio, James; Chauvin, Sara; DeSmet, Timothy; Gujja, Sharvari; McCowan, Caryn; Montmayeur, Anna; Steelman, Scott; Frimodt-Møller, Jakob; Petersen, Andreas M.; Struve, Carsten; Krogfelt, Karen A.; Bingen, Edouard; Weill, François-Xavier; Lander, Eric S.; Nusbaum, Chad; Birren, Bruce W.; Hung, Deborah T.; Hanage, William P.

2012-01-01

The degree to which molecular epidemiology reveals information about the sources and transmission patterns of an outbreak depends on the resolution of the technology used and the samples studied. Isolates of Escherichia coli O104:H4 from the outbreak centered in Germany in May–July 2011, and the much smaller outbreak in southwest France in June 2011, were indistinguishable by standard tests. We report a molecular epidemiological analysis using multiplatform whole-genome sequencing and analysis of multiple isolates from the German and French outbreaks. Isolates from the German outbreak showed remarkably little diversity, with only two single nucleotide polymorphisms (SNPs) found in isolates from four individuals. Surprisingly, we found much greater diversity (19 SNPs) in isolates from seven individuals infected in the French outbreak. The German isolates form a clade within the more diverse French outbreak strains. Moreover, five isolates derived from a single infected individual from the French outbreak had extremely limited diversity. The striking difference in diversity between the German and French outbreak samples is consistent with several hypotheses, including a bottleneck that purged diversity in the German isolates, variation in mutation rates in the two E. coli outbreak populations, or uneven distribution of diversity in the seed populations that led to each outbreak. PMID:22315421

Utility and safety of a novel surgical microscope laser light source

PubMed Central

Bakhit, Mudathir S.; Suzuki, Kyouichi; Sakuma, Jun; Fujii, Masazumi; Murakami, Yuta; Ito, Yuhei; Sugano, Tetsuo; Saito, Kiyoshi

2018-01-01

Objective Tissue injuries caused by the thermal effects of xenon light microscopes have previously been reported. Due to this, the development of a safe microscope light source became a necessity. A newly developed laser light source is evaluated regarding its effectiveness and safety as an alternative to conventional xenon light source. Methods We developed and tested a new laser light source for surgical microscopes. Four experiments were conducted to compare xenon and laser lights: 1) visual luminance comparison, 2) luminous and light chromaticity measurements, 3) examination and analysis of visual fatigue, and 4) comparison of focal temperature elevation due to light source illumination using porcine muscle samples. Results Results revealed that the laser light could be used at a lower illumination value than the xenon light (p < 0.01). There was no significant difference in visual fatigue status between the laser light and the xenon light. The laser light was superior to the xenon light regarding luminous intensity and color chromaticity. The focal temperature elevation of the muscle samples was significantly higher when irradiated with xenon light in vitro than with laser light (p < 0.01). Conclusion The newly developed laser light source is more efficient and safer than a conventional xenon light source. It lacks harmful ultraviolet waves, has a longer lifespan, a lower focal temperature than that of other light sources, a wide range of brightness and color production, and improved safety for the user’s vision. Further clinical trials are necessary to validate the impact of this new light source on the patient’s outcome and prognosis. PMID:29390016

Attitudes Concerning Postmortem Organ Donation: A Multicenter Survey in Various German Cohorts.

PubMed

Uhlig, Constantin E; Böhringer, Daniel; Hirschfeld, Gerrit; Seitz, Berthold; Schmidt, Hartmut

2015-10-13

The aim of this study was to characterize postmortem organ donation attitudes in various German cohorts. Employees of 2 German cities and 2 German university hospitals, employees of a German automobile enterprise, and members of a German Medical Society were administered a questionnaire about postmortem organ and tissue donation attitudes. Demographic data and general attitudes were questioned and focused on: I) willingness to donate organs, II) holding a donor card, and III) having discussed the topic with the family. Of 5291 participants, 65.2% reported favoring postmortem organ donation. Missing negative experiences, the idea that donation is helpful, a non-medical professional environment, excellent general health, gender, agreement with the brain-death paradigm, and age significantly influenced the participants' attitudes. Participants were more likely to possess donor cards and had discussed more often with family members if they agreed with the brain-death paradigm and considered donation to be helpful. Males and older participants were the most likely to neglect donor cards, and Catholics, Protestants, and participants with poor health were the least likely to donate organs. Interest in receiving more information was expressed by 38.1% and 50.6% of participants refusing donation of all or of specific organs, respectively, and suggested the internet (60.0%) and family doctors (35.0%) as preferred sources of information. Public campaigns in Germany should focus on males and older people as regards donor cards, and females, younger, and religiously affiliated persons as regards the general willingness to donate organs postmortem.

Polyfluorinated compounds in ambient air from ship- and land-based measurements in northern Germany

NASA Astrophysics Data System (ADS)

Dreyer, Annekatrin; Ebinghaus, Ralf

Neutral volatile and semi-volatile polyfluorinated organic compounds (PFC) and ionic perfluorinated compounds were determined in air samples collected at two sites in the vicinity of Hamburg, Germany, and onboard the German research vessel Atair during a cruise in the German Bight, North Sea, in early November 2007. PUF/XAD-2/PUF cartridges and glass fiber filters as sampling media were applied to collect several fluorotelomer alcohols (FTOH), fluorotelomer acrylates (FTA), perfluoroalkyl sulfonamides (FASA), and perfluoroalkyl sulfonamido ethanols (FASE) in the gas- and particle-phase as well as a set of perfluorinated carboxylates (PFCA) and sulfonates (PFSA) in the particle-phase. This study presents the distribution of PFC in ambient air of the German North Sea and in the vicinity of Hamburg for the first time. Average total PFC concentrations in and around Hamburg (180 pg m -3) were higher than those observed in the German Bight (80 pg m -3). In the German Bight, minimum-maximum gas-phase concentrations of 17-82 pg m -3 for ΣFTOH, 2.6-10 pg m -3 for ΣFTA, 10-15 pg m -3 for ΣFASA, and 2-4.4 pg m -3 for ΣFASE were determined. In the vicinity of Hamburg, minimum-maximum gas-phase concentrations of 32-204 pg m -3 for ΣFTOH, 3-26 pg m -3 for ΣFTA, 3-18 pg m -3 for ΣFASA, and 2-15 pg m -3 for ΣFASE were detected. Concentrations of perfluorinated acids were in the range of 1-11 pg m -3. FTOH clearly dominated the substance spectrum; 8:2 FTOH occurred in maximum proportions. Air mass back trajectories, cluster, and correlation analyses revealed that the air mass origin and thus medium to long range atmospheric transport was the governing parameter for the amount of PFC in ambient air. Southwesterly located source regions seemed to be responsible for elevated PFC concentrations, local sources appeared to be of minor importance.

Variant Grapheme--Phoneme Correspondences in Unfamiliar Polysyllabic Words.

ERIC Educational Resources Information Center

Trammell, Robert L.

1990-01-01

Ten college students and 10 Ph.D.s read aloud 30 unfamiliar English words, 2 to 5 syllables in length of Greek, Latin, and Germanic origin. Each response was compared to the rule predicted, dictionary prescribed, and most frequent pronunciation for the word. Models of reading are examined in light of the results. (71 references) (JL)

Stratospheric Observatory for Infrared Astronomy (SOFIA)

NASA Astrophysics Data System (ADS)

Becklin, E. E.

The joint U.S. and German SOFIA project to develop and operate a 2.5-meter infrared airborne telescope in a Boeing 747-SP is now in the final stages of development. First science flights will begin in 2006. The observatory is expected to operate for over 20 years. The first light science instruments and some science projects will be discussed.

Scintillator material

DOEpatents

Anderson, David F.; Kross, Brian J.

1994-01-01

An improved scintillator material comprising cerium fluoride is disclosed. Cerium fluoride has been found to provide a balance of good stopping power, high light yield and short decay constant that is superior to known scintillator materials such as thallium-doped sodium iodide, barium fluoride and bismuth germanate. As a result, cerium fluoride is favorably suited for use as a scintillator material in positron emission tomography.

Scintillator material

DOEpatents

Anderson, David F.; Kross, Brian J.

1992-01-01

An improved scintillator material comprising cerium fluoride is disclosed. Cerium fluoride has been found to provide a balance of good stopping power, high light yield and short decay constant that is superior to known scintillator materials such as thallium-doped sodium iodide, barium fluoride and bismuth germanate. As a result, cerium fluoride is favorably suited for use as a scintillator material in positron emission tomography.

Method and apparatus for acquisition and tracking of light sources in a transient event rich environment

NASA Technical Reports Server (NTRS)

Bolin, Kenneth (Inventor); Flynn, David (Inventor); Fowski, Walter (Inventor); Miklus, Kenneth (Inventor); Kissh, Frank (Inventor); Abreu, Rene (Inventor)

1993-01-01

A method and apparatus for tracking a light source in a transient event rich environment locks on to a light source incident on a field-of-view 1 of a charge-coupled-device (CCD) array 6, validates the permanence of said light source and transmits data relating to the brilliance and location of said light source if said light source is determined to be permanent.

Radon and Cancer

MedlinePlus

... in the Danish study: another source of dose. Health Physics 2009; 97(4):343–347. [PubMed Abstract] Krewski ... radiation and leukemia risk among German uranium miners. Health Physics 2010; 99(3):314–321. [PubMed Abstract] National ...

Non-contact pumping of light emitters via non-radiative energy transfer

DOEpatents

Klimov, Victor I.; Achermann, Marc

2010-01-05

A light emitting device is disclosed including a primary light source having a defined emission photon energy output, and, a light emitting material situated near to said primary light source, said light emitting material having an absorption onset equal to or less in photon energy than the emission photon energy output of the primary light source whereby non-radiative energy transfer from said primary light source to said light emitting material can occur yielding light emission from said light emitting material.

"War dysentery" and the limitations of German military hygiene during World War I.

PubMed

Linton, Derek S

2010-01-01

This article examines major epidemics of bacillary dysentery in the German army as well as among civilians in eastern Europe and in Germany during World War I. These epidemics were all the more surprising in light of prewar advances in understanding the disease and limiting dysentery outbreaks. Three major reasons are adduced for the incapacity of German military hygienists to prevent wartime epidemics. First was the difficulty of bacteriological testing at the front, especially early in the war, with negative consequences for diagnosis, therapy, and disease control. Second was inadequate hygiene including major shortcomings in latrine cleanliness and attempts to grapple with the "fly plague." Third was the lack of a Pasteur-type vaccine until late in the war. Susceptibility to dysentery was also heightened by war-related nutritional deficiencies. Taking off from an article by the English medical historian Roger Cooter, this article shows that the concept of "war dysentery" was socially constructed and served a variety of professional interests but at the same time takes issue with Cooter's arguments against linking "war" and "epidemics" pathogenetically.

The evolution of empathy research: Models, muddles, and mechanisms.

PubMed

Frankel, Richard M

2017-11-01

The word empathy enters the English language in 1909, translated incompletely from German by a British-born psychologist interested in introspection. In the ensuing 100+ years, the term has been defined in a range of different ways by researchers and scholars. The biopsychosocial framework developed by George Engel comes closest to capturing empathy as a biological, psychological and social phenomenon. In this paper, I explore the psychological and social/communicative dimensions of empathy. Psychologists ask the question, How does the capacity for empathy vary across individuals? By contrast, interaction scholars ask, How is empathy communicated from one person (a healthcare provider) to another (a sufferer)? A communication focus involves the accuracy and impact of empathic communication as evidenced in a sufferer's response. The two views of empathy, as a quality or capacity or as co-created in interaction, are contradictory, and are a source of confusion and contentiousness in the research literature. As in theoretical physics, where an as yet unresolved 80year controversy has marked the debate about whether light is a particle or wave, research on empathy will likely remain paradoxical, unresolved and a source of creativity and innovation in the science and art of human caring. Copyright © 2017. Published by Elsevier B.V.

"Congo" red: out of Africa?

PubMed

Steensma, D P

2001-02-01

Congo red is the essential histologic stain for demonstrating the presence of amyloidosis in fixed tissues. To the best of my knowledge, nothing has been written about why the stain is named "Congo." To understand the etymology and history of the Congo red histologic stain. Primary sources were consulted extensively, including 19th-century corporate documents, newspapers, legal briefs, patents, memoirs, and scientific papers. Sources were obtained from multiple university libraries and German corporate archives. To Europeans in 1885, the word Congo evoked exotic images of far-off central Africa known as The Dark Continent. The African Congo was also a political flashpoint during the Age of Colonialism. "Congo" red was introduced in Berlin in 1885 as the first of the economically lucrative direct textile dyes. A patent on Congo red was filed by the AGFA Corporation of Berlin 3 weeks after the conclusion of the well-publicized Berlin West Africa Conference. During these important diplomatic talks, German Chancellor Otto von Bismarck presided over a discussion of free trade issues in the Congo River basin. A challenge to AGFA's Congo red patent led to a precedent-setting decision in intellectual property law. The Congo red stain was named "Congo" for marketing purposes by a German textile dyestuff company in 1885, reflecting geopolitical current events of that time.

Atom chip gravimeter

NASA Astrophysics Data System (ADS)

Schubert, Christian; Abend, Sven; Gebbe, Martina; Gersemann, Matthias; Ahlers, Holger; Müntinga, Hauke; Matthias, Jonas; Sahelgozin, Maral; Herr, Waldemar; Lämmerzahl, Claus; Ertmer, Wolfgang; Rasel, Ernst

2016-04-01

Atom interferometry has developed into a tool for measuring rotations [1], accelerations [2], and testing fundamental physics [3]. Gravimeters based on laser cooled atoms demonstrated residual uncertainties of few microgal [2,4] and were simplified for field applications [5]. Atomic gravimeters rely on the interference of matter waves which are coherently manipulated by laser light fields. The latter can be interpreted as rulers to which the position of the atoms is compared. At three points in time separated by a free evolution, the light fields are pulsed onto the atoms. First, a coherent superposition of two momentum states is produced, then the momentum is inverted, and finally the two trajectories are recombined. Depending on the acceleration the atoms experienced, the number of atoms detected in the output ports will change. Consequently, the acceleration can be determined from the output signal. The laser cooled atoms with microkelvin temperatures used in state-of-the-art gravimeters impose limits on the accuracy [4]. Therefore, ultra-cold atoms generated by Bose-Einstein condensation and delta-kick collimation [6,7] are expected to be the key for further improvements. These sources suffered from a low flux implying an incompatible noise floor, but a competitive performance was demonstrated recently with atom chips [8]. In the compact and robust setup constructed for operation in the drop tower [6] we demonstrated all steps necessary for an atom chip gravimeter with Bose-Einstein condensates in a ground based operation. We will discuss the principle of operation, the current performance, and the perspectives to supersede the state of the art. The authors thank the QUANTUS cooperation for contributions to the drop tower project in the earlier stages. This work is supported by the German Space Agency (DLR) with funds provided by the Federal Ministry for Economic Affairs and Energy (BMWi) due to an enactment of the German Bundestag under grant numbers DLR 50WM1552-1557 (QUANTUS-IV-Fallturm) and by the Deutsche Forschungsgemeinschaft in the framework of the SFB 1128 geo-Q. [1] P. Berg et al., Composite-Light-Pulse Technique for High-Precision Atom Interferometry, Phys. Rev. Lett., 114, 063002, 2015. [2] A. Peters et al., Measurement of gravitational acceleration by dropping atoms, Nature 400, 849, 1999. [3] D. Schlippert et al., Quantum Test of the Universality of Free Fall, Phys. Rev. Lett., 112, 203002, 2014. [4] A. Louchet-Chauvet et al., The influence of transverse motion within an atomic gravimeter, New J. Phys. 13, 065026, 2011. [5] Q. Bodart et al., A cold atom pyramidal gravimeter with a single laser beam, Appl. Phys. Lett. 96, 134101, 2010. [6] H. Müntinga et al., Interferometry with Bose-Einstein Condensates in Microgravity, Phys. Rev. Lett., 110, 093602, 2013. [7] T. Kovachy et al., Matter Wave Lensing to Picokelvin Temperatures, Phys. Rev. Lett. 114, 143004, 2015. [8] J. Rudolph et al., A high-flux BEC source for mobile atom interferometers, New J. Phys. 17, 065001, 2015.

GBIS: the information system of the German Genebank

PubMed Central

Oppermann, Markus; Weise, Stephan; Dittmann, Claudia; Knüpffer, Helmut

2015-01-01

The German Federal ex situ Genebank of Agricultural and Horticultural Crop Species is the largest collection of its kind in the countries of the European Union and amongst the 10 largest collections worldwide. Beside its enormous scientific value as a safeguard of plant biodiversity, the plant genetic resources maintained are also of high importance for breeders to provide new impulses. The complex processes of managing such a collection are supported by the Genebank Information System (GBIS). GBIS is an important source of information for researchers and plant breeders, e.g. for identifying appropriate germplasm for breeding purposes. In addition, the access to genebank material as a sovereign task is also of high interest to the general public. Moreover, GBIS acts as a data source for global information systems, such as the Global Biodiversity Information Facility (GBIF) or the European Search Catalogue for Plant Genetic Resources (EURISCO). Database URL: http://gbis.ipk-gatersleben.de/ PMID:25953079

Regional medicine use in the Rhine basin and its implication on water quality

NASA Astrophysics Data System (ADS)

Hut, R. W.; Houtman, C. J.; van de Giesen, N. C.; de Jong, S. A. P.

2012-04-01

Do Germans use more painkillers than the French? Pharmaceuticals used in our Western society form an important group of contaminants found in the river Rhine. As this river is the drinking water source for millions of Europeans, methods to investigate relations between drug use and their penetration in the watercycle are of great importance. An analysis is presented relating medicine residue in the river Rhine to the number of people living in its watershed. An extensive measuring campaign was carried out, sampling river Rhine at 42 locations from its source to the start of its delta (Dutch-German border). The samples were analyzed for 40 common pharmaceuticals. Using discharge data, digital elevation models and demographic data from Eurostat, the relation between total load of drug residue and population was analyzed. Results show regional differences in drug use as well as implications for (down)stream water quality concerning contamination with pharmaceuticals.

Current and future translation trends in aeronautics and astronautics

NASA Technical Reports Server (NTRS)

Rowe, Timothy

1986-01-01

The pattern of translation activity in aeronautics and astronautics is reviewed. It is argued that the international nature of the aerospace industry and the commercialization of space have increased the need for the translation of scientific literature in the aerospace field. Various factors which can affect the quality of translations are examined. The need to translate the activities of the Soviets, Germans, and French in materials science in microgravity, of the Japanese, Germans, and French in the development of industrial ceramics, and of the Chinese in launching and communications satellites is discussed. It is noted that due to increases in multilateral and bilateral relationships in the aerospace industry, the amount of translation from non-English source material into non-English text will increase and the most important languages will be French and German, with an increasing demand for Japanese, Chinese, Spanish, and Italian translations.

[The psychology of being unaccounted for, based on the example of children of missing German soldiers from World War II].

PubMed

Orlowski, Henning V; Klauer, Thomas; Freyberger, Harald J; Seidler, Günter H; Kuwert, Philipp

2013-01-01

Despite today's extensive research on the psychosocial consequences of World War II, the group of wives and children whose husbands or fathers went "missing in action" during the Second World War, has yet to be studied systematically in Germany. The present review article shows the special role the wives, and in particular the children, of missing German soldiers played in society and discusses the impact of their loved ones being unaccounted has had on the mental health of this group. An overview of current research on the psychosocial status of the war generation is given following a short historical introduction to the theme. Subsequently, we discuss the legal and social situation of the families of missing German soldiers during the postwar decades. Finally, two psychological concepts drawn from the US research show that specific disorders, such as complicated grief or "boundary ambiguity," can occur in the relatives of missing persons and blur the line between hope and grief occurring as a result of ambiguous loss. The psychosocial impact of having a relative go missing has hardly been noticed in the German research tradition after World War II. Particularly in light of the age structure of those directly affected and the experiences of transgenerational transmission this neglected psychosocial research subject urgently needs further scientific investigation, inasmuch as the age of the family members still allows it.

Quality management of clinical-practical instruction for Practical Year medical students in Germany - proposal for a catalogue of criteria from the German Society of Medical Education.

PubMed

Raes, Patricia; Angstwurm, Matthias; Berberat, Pascal; Kadmon, Martina; Rotgans, Jerome; Streitlein-Böhme, Irmgard; Burckhardt, Gerhard; Fischer, Martin R

2014-01-01

Amended in 2013, the current version of the German Medical Licensure Regulation contains structural specifications that are also required of non-university institutions involved in Practical Year clinical training. The criteria are worded in relatively general terms. Furthermore, not all of the structural specifications can be readily applied to every subject area. In order to ensure commensurability in Practical Year instruction in Germany, not least in light of recently introduced Practical Year mobility, it is necessary to define consistent quality criteria for Practical Year training. The authors therefore propose a catalogue of criteria for the quality management process in Practical Year instruction facilities. In January 2014, the board of directors of the German Society for Medical Education decided to establish a committee comprised of representatives from various German medical faculties. In a process similar to the Delphi methodology, the group developed criteria for structure, process and outcome quality in Practical Year training in Germany. The criteria developed for structure, process and outcome quality apply to Practical Year training in academic teaching hospitals and university medical centres. Furthermore, modalities for review are proposed. The present catalogue of criteria is intended to contribute to the formation of a basis for the most consistent quality standards possible for Practical Year instruction in Germany.

[Not Available.

PubMed

Berg, Wieland

2016-01-01

The German Academy of Sciences Leopoldina submitted at the outbreak of the First World War no public opinion - regardless of personal settings of the board and unlike many of its members. Public-meetings, however, were introduced only in 1924, making it the Leopoldina were no opportunities to academy speeches, in contrast to other scientific academies. But in their official bulletin with which they appeared in public, obituaries were published during the entire war period to researchers regardless of the nation, including in French and English scholars. It was only at the suggestion of a member from the July 1915 German war dead were honoured with a symbolic Iron Cross, as was common in German newspapers from the beginning of the war. An exclusion of members from the 'hostile' abroad was never considered. During the war, however, no foreigners were co-opted, but again only immediately after the war. The academy board then pleaded strongly for an international reconciliation of sciences. At the public propaganda war in the "battle of the minds" were also renowned Leopoldina members involved, as reflected in total war and its consequences in the Leopoldina members similar to the entire German population. The analysis of the signatories of various manifestos brings to light that the "Declaration of University Professors of Germany" only just over half of the scholars instead of "almost the whole teaching body" was signed, as previously generalized.

Contributions to the History of Astronomy, Vol. 3. (German Title: Beiträge zur Astronomiegeschichte, Band 3)

NASA Astrophysics Data System (ADS)

Dick, Wolfgang R.; Hamel, Jürgen

The main papers of this issue deal with previously unknown details of the foundation of the astronomical observatories in Gotha and in Königsberg (with numerous original documents by F.W. Bessel), with the Mecklenburg ordnance survey (1853-1873, with previously unknown letters by C.F. Gauss), with the merits of the Leipzig astronomer G.A. Jahn, with the internationality of the Astronomische Gesellschaft, and with early, previously little noted works on the expansion of the Universe. The issue contains a description of the important collection of sundials in the Kassel museum, discussions about the Medieval ``Phantom Period'', about Goethe's description of the zodiacal light, as well as obituaries and book reviews. Most papers in German, one in English.

Heating device for semiconductor wafers

DOEpatents

Vosen, Steven R.

1999-01-01

An apparatus for heat treating semiconductor wafers is disclosed. The apparatus includes a heating device which contains an assembly of light energy sources for emitting light energy onto a wafer. In particular, the light energy sources are positioned such that many different radial heating zones are created on a wafer being heated. For instance, in one embodiment, the light energy sources form a spiral configuration. In an alternative embodiment, the light energy sources appear to be randomly dispersed with respect to each other so that no discernable pattern is present. In a third alternative embodiment of the present invention, the light energy sources form concentric rings. Tuning light sources are then placed in between the concentric rings of light.

Heating device for semiconductor wafers

DOEpatents

Vosen, S.R.

1999-07-27

An apparatus for heat treating semiconductor wafers is disclosed. The apparatus includes a heating device which contains an assembly of light energy sources for emitting light energy onto a wafer. In particular, the light energy sources are positioned such that many different radial heating zones are created on a wafer being heated. For instance, in one embodiment, the light energy sources form a spiral configuration. In an alternative embodiment, the light energy sources appear to be randomly dispersed with respect to each other so that no discernible pattern is present. In a third alternative embodiment of the present invention, the light energy sources form concentric rings. Tuning light sources are then placed in between the concentric rings of light. 4 figs.

The Teaching of Modern Languages in France and Francophone Switzerland (1740-1940): A Historiographical Overview

ERIC Educational Resources Information Center

Extermann, Blaise

2018-01-01

This paper has two aims: firstly, it sketches the history of language teaching in France and francophone Switzerland over a period of 200 years, with a particular focus on the teaching of German. Secondly, it seeks to shed light on some of the francophone historiographical approaches which have influenced recent research in this area. Historical…

Scintillator material

DOEpatents

Anderson, D.F.; Kross, B.J.

1992-07-28

An improved scintillator material comprising cerium fluoride is disclosed. Cerium fluoride has been found to provide a balance of good stopping power, high light yield and short decay constant that is superior to known scintillator materials such as thallium-doped sodium iodide, barium fluoride and bismuth germanate. As a result, cerium fluoride is favorably suited for use as a scintillator material in positron emission tomography. 4 figs.

Stratospheric Observatory for Infrared Astronomy (SOFIA)

NASA Astrophysics Data System (ADS)

Becklin, E. E.

The joint US and German SOFIA project to develop and operate a 2.5 m infrared airborne telescope in a Boeing 747-SP is now in the final stages of development. First science flights will begin in 2007. The observatory is expected to operate for over 20 years. The sensitivity, characteristics, science instrument complement, and examples of first light science are discussed.

Why Are Students (Not) Motivated to Change Academic Procrastination? An Investigation Based on the Transtheoretical Model of Change

ERIC Educational Resources Information Center

Grunschel, Carola; Schopenhauer, Lena

2015-01-01

In light of the drawbacks of academic procrastination, it is surprising that not all students want to decrease academic procrastination. To find out why students are motivated (or not) to change academic procrastination, we investigated the characteristics of 377 German students with different motivations to change based on the Transtheoretical…

Toughness Properties of Nodular Iron

NASA Astrophysics Data System (ADS)

Bradley, Walter L.

1985-01-01

The German government recently certified ductile iron for construction of nuclear waste transport containers. This approved use of ductile iron for such a critical application represents the culmination of ten years worth of research bringing to light the surprising toughness of ductile iron. This article explains how modern fracture mechanics and microstructure/property relationships have altered the stereotype of ductile iron as a low toughness material.

Scintillator material

DOEpatents

Anderson, D.F.; Kross, B.J.

1994-06-07

An improved scintillator material comprising cerium fluoride is disclosed. Cerium fluoride has been found to provide a balance of good stopping power, high light yield and short decay constant that is superior to known scintillator materials such as thallium-doped sodium iodide, barium fluoride and bismuth germanate. As a result, cerium fluoride is favorably suited for use as a scintillator material in positron emission tomography. 4 figs.

Resources of dark skies in German climatic health resorts.

PubMed

Gabriel, Katharina M A; Kuechly, Helga U; Falchi, Fabio; Wosniok, Werner; Hölker, Franz

2017-01-01

Illumination of nocturnal environments is increasing steadily worldwide. While there are some benefits for mankind, light at night affects animals, plants, and human health by blurring the natural distinction between day and night. International regulations exist to protect the environment for the maintenance of human health but nocturnal darkness is not considered. In Germany, cities and communities labeled as Climatic Health Resorts provide for high standards in air quality. However, their degree of nocturnal darkness is unexplored so far. In our study, we examined the degree of nocturnal darkness in German Climatic Health Resorts by two datasets based on georeferenced remote sensing data. The majority of Climatic Health Resorts (93.1 %) are able to offer a relative respite (≥ 20 mag/arcsec 2 ) from a degraded nocturnal environment, while only 3.4 % are able to offer a dark, if by no means pristine, night environment (≥ 21 mag/arcsec 2 ). Climatic Health Resorts emit less light as well as are less affected by night sky brightness compared to the average of non-classified communities. In combination with daytime requirements, the resorts provide conditions for a more distinct day-and-night-cycle than non-classified communities.

CO2 emissions from German drinking water reservoirs.

PubMed

Saidi, Helmi; Koschorreck, Matthias

2017-03-01

Globally, reservoirs are a significant source of atmospheric CO 2 . However, precise quantification of greenhouse gas emissions from drinking water reservoirs on the regional or national scale is still challenging. We calculated CO 2 fluxes for 39 German drinking water reservoirs during a period of 22years (1991-2013) using routine monitoring data in order to quantify total emission of CO 2 from drinking water reservoirs in Germany and to identify major drivers. All reservoirs were a net CO 2 source with a median flux of 167gCm -2 y -1 , which makes gaseous emissions a relevant process for the carbon budget of each reservoir. Fluxes varied seasonally with median fluxes of 13, 48, and 201gCm -2 y -1 in spring, summer, and autumn respectively. Differences between reservoirs appeared to be primarily caused by the concentration of CO 2 in the surface water rather than by the physical gas transfer coefficient. Consideration of short term fluctuations of the gas transfer coefficient due to varying wind speed had only a minor effect on the annual budgets. High CO 2 emissions only occurred in reservoirs with pH<7 and total alkalinity <0.2mEql -1 . Annual CO 2 emissions correlated exponentially with pH but not with dissolved organic carbon (DOC). There was significant correlation between land use in the catchment and CO 2 emissions. In total, German drinking water reservoirs emit 44000t of CO 2 annually, which makes them a negligible CO 2 source (<0.005% of national CO 2 emissions) in Germany. Copyright © 2017 Elsevier B.V. All rights reserved.

Lead exposure from food: the German LExUKon project.

PubMed

Schneider, Klaus; Schwarz, Markus A; Lindtner, Oliver; Blume, Katrin; Heinemeyer, Gerhard

2014-01-01

Lead is a highly toxic contaminant with food being the major source of exposure for the general public. The second German food consumption survey (Nationale Verzehrsstudie II - NVS II) with about 20 000 participants (15 371 for dietary history interviews used for this study) allowed for an updated exposure assessment for the German population. Based on these comprehensive data, information on consumption of 545 individual food items by the German population was generated. Lead concentrations in food were compiled from the German food monitoring programme, European countries' authority programmes and the published literature, covering the years from 2000 to 2009, and were multiplied with consumption data to obtain estimates of lead intake from food. Average lead concentrations per main food group were highest for meat (including offal), followed by fish (including seafood), vegetables and cereals. Due to high consumption, beverages contributed most to the intake of the general public, followed by main groups vegetables, fruits & nuts and cereals. Lead intake from food was estimated to be 0.53 and 0.72 µg kg(-1) bw and day for average and high-end consumers, respectively. This is close to (average consumers) respectively above (high-end consumers) a reference value derived from a recent health risk evaluation performed by EFSA, using the benchmark approach. Uncertainties in these estimates pertain to the influence of values below the limit of quantification and some foods not considered due to lacking occurrence data. In conclusion, the estimated lead intake of the German population from food is still close to health-based reference values. Further efforts to reduce lead intake are required.

Plasticity in the adult language system: a longitudinal electrophysiological study on second language learning.

PubMed

Stein, M; Dierks, T; Brandeis, D; Wirth, M; Strik, W; Koenig, T

2006-11-01

Event-related potentials (ERPs) were used to trace changes in brain activity related to progress in second language learning. Twelve English-speaking exchange students learning German in Switzerland were recruited. ERPs to visually presented single words from the subjects' native language (English), second language (German) and an unknown language (Romansh) were measured before (day 1) and after (day 2) 5 months of intense German language learning. When comparing ERPs to German words from day 1 and day 2, we found topographic differences between 396 and 540 ms. These differences could be interpreted as a latency shift indicating faster processing of German words on day 2. Source analysis indicated that the topographic differences were accounted for by shorter activation of left inferior frontal gyrus (IFG) on day 2. In ERPs to English words, we found Global Field Power differences between 472 and 644 ms. This may due to memory traces related to English words being less easily activated on day 2. Alternatively, it might reflect the fact that--with German words becoming familiar on day 2--English words loose their oddball character and thus produce a weaker P300-like effect on day 2. In ERPs to Romansh words, no differences were observed. Our results reflect plasticity in the neuronal networks underlying second language acquisition. They indicate that with a higher level of second language proficiency, second language word processing is faster and requires shorter frontal activation. Thus, our results suggest that the reduced IFG activation found in previous fMRI studies might not reflect a generally lower activation but rather a shorter duration of activity.

Intelligence Sharing in Counterproliferation

DTIC Science & Technology

2007-09-01

Claims Alleged Mobile WMD Plants Solely for ‘ Agrochemicals ,” Spiegel Online, Hamburg, Germany. Translated by OpenSource.gov https...Knauer, Sebastian. "German Site Claims Alleged Mobile WMD Plants Solely for Agrochemicals ." Spiegel Online. https://www.opensource.gov (accessed June

Nonimaging Optical Illumination System

DOEpatents

Winston, Roland

1994-08-02

A nonimaging illumination optical device for producing selected intensity output over an angular range. The device includes a light reflecting surface (24, 26) around a light source (22) which is disposed opposite the aperture opening of the light reflecting surface (24, 26). The light source (22) has a characteristic dimension which is small relative to one or more of the distance from the light source (22) to the light reflecting surface (24, 26) or the angle subtended by the light source (22) at the light reflecting surface (24, 26).

Development of a circadian light source

NASA Astrophysics Data System (ADS)

Nicol, David B.; Ferguson, Ian T.

2002-11-01

Solid state lighting presents a new paradigm for lighting - controllability. Certain characteristics of the lighting environment can be manipulated, because of the possibility of using multiple LEDs of different emission wavelengths as the illumination source. This will provide a new, versatile, general illumination source due to the ability to vary the spectral power distribution. New effects beyond the visual may be achieved that are not possible with conventional light sources. Illumination has long been the primary function of lighting but as the lighting industry has matured the psychological aspects of lighting have been considered by designers; for example, choosing a particular lighting distribution or color variation in retail applications. The next step in the evolution of light is to consider the physiological effects of lighting that cause biological changes in a person within the environment. This work presents the development of a source that may have important bearing on this area of lighting. A circadian light source has been developed to provide an illumination source that works by modulating its correlated color temperature to mimic the changes in natural daylight through the day. In addition, this source can cause or control physiological effects for a person illuminated by it. The importance of this is seen in the human circadian rhythm's peak response corresponding to blue light at ~460 nm which corresponds to the primary spectral difference in increasing color temperature. The device works by adding blue light to a broadband source or mixing polychromatic light to mimic the variation of color temperature observed for the Planckian Locus on the CIE diagram. This device can have several applications including: a tool for researchers in this area, a general illumination lighting technology, and a light therapy device.

A tuneable approach to uniform light distribution for artificial daylight photodynamic therapy.

PubMed

O'Mahoney, Paul; Haigh, Neil; Wood, Kenny; Brown, C Tom A; Ibbotson, Sally; Eadie, Ewan

2018-06-16

Implementation of daylight photodynamic therapy (dPDT) is somewhat limited by variable weather conditions. Light sources have been employed to provide artificial dPDT indoors, with low irradiances and longer treatment times. Uniform light distribution across the target area is key to ensuring effective treatment, particularly for large areas. A novel light source is developed with tuneable direction of light emission in order to meet this challenge. Wavelength composition of the novel light source is controlled such that the protoporphyrin-IX (PpIX) weighed spectra of both the light source and daylight match. The uniformity of the light source is characterised on a flat surface, a model head and a model leg. For context, a typical conventional PDT light source is also characterised. Additionally, the wavelength uniformity across the treatment site is characterised. The PpIX-weighted spectrum of the novel light source matches with PpIX-weighted daylight spectrum, with irradiance values within the bounds for effective dPDT. By tuning the direction of light emission, improvements are seen in the uniformity across large anatomical surfaces. Wavelength uniformity is discussed. We have developed a light source that addresses the challenges in uniform, multiwavelength light distribution for large area artificial dPDT across curved anatomical surfaces. Copyright © 2018. Published by Elsevier B.V.

Atom-chip based quantum gravimetry for the precise determination of absolute local gravity

NASA Astrophysics Data System (ADS)

Abend, S.

2015-12-01

We present a novel technique for the precise measurement of absolute local gravity based on cold atom interferometry. Atom interferometry utilizes the interference of matter waves interrogated by laser light to read out inertial forces. Today's generation of these devices typically operate with test mass samples, that consists of ensembles of laser cooled atoms. Their performance is limited by the velocity spread and finite-size of the test masses that impose systematic uncertainties at the level of a few μGal. Rather than laser cooled atoms we employ quantum degenerate ensembles, so called Bose-Einstein condensates, as ultra-sensitive probes for gravity. These sources offer unique properties in temperature as well as in ensemble size that will allow to overcome the current limitations with the next generation of sensors. Furthermore, atom-chip technologies offer the possibility to generate Bose-Einstein condensates in a fast and reliable way. We show a lab-based prototype that uses the atom-chip itself to retro-reflect the interrogation laser and thus serving as inertial reference inside the vacuum. With this setup it is possible to demonstrate all necessary steps to measure gravity, including the preparation of the source, spanning an interferometer as well as the detection of the output signal, within an area of 1 cm3 right below the atom-chip and to analyze relevant systematic effects. In the framework of the center of excellence geoQ a next generation device is under construction at the Institut für Quantenoptik, that will allow for in-field measurements. This device will feature a state-of-the-art atom-chip source with a high-flux of ultra-cold atoms at a repetition rate of 1-2 Hz. In cooperation with the Müller group at the Institut für Erdmessung the sensor will be characterized in the laboratory first, to be ultimately employed in campaigns to measure the Fennoscandian uplift at the level of 1 μGal. The presented work is part of the center of excellence geoQ (SFB 1128), funded by the Deutsche Forschungsgemeinschaft (DFG). This work is supported by the German Space Agency (DLR) with funds provided by the Federal Ministry for Economic Affairs and Energy (BMWi) due to an enactment of the German Bundestag under grant numbers DLR 50 1131-1137 (QUANTUS-III).

Global observations of atmospheric CH4 by Integrated Path Differential-Absorption Lidar: the French-German Climate Monitoring Initiative

NASA Astrophysics Data System (ADS)

Ehret, Gerhard; Flamant, Pierre; Ciais, Philippe; Fabien, Gibert; Amediek, Axel; Kiemle, Christoph; Fix, Andreas; Quatrevalet, Mathieu; Wirth, Martin

Atmospheric methane (CH4) is a powerful greenhouse gas, which has a Greenhouse Warming Potential (GWP) of 25 relative to CO2 on a time scale of 100 years. Despite the fact that the imbalance between the sources and sinks has decreased in the early 1990's to an insignificant value, a significant renewal of the CH4 growth is reported in recent years. Questions arise whether an increase of atmospheric CH4 might be fostered through melting of permafrost soil in the Arctic region or arise from changes of the tropical wetlands which comprise the biggest natural methane source. Another reason could be the change in the agro-industrial era of predominant human influence or the very large deposits of CH4 as gas hydrates on ocean shelves that are vulnerable to ocean warming. The French-German Climate Monitoring Initiative, which has recently been selected to undergo Phase0/A studies in a joint project by the space agencies CNES (France)and DLR (Germany), targets on satellite observations of atmospheric CH4 for the improvement of our knowledge on regional to synoptic scale CH4 sources on a global basis. As a novel feature, the observational instrument of this mission will be an Integrated Path Differential-Absorption (IPDA) Lidar system embarked on board of the French Myriade platform for the measurement of the column-weighted dry-air mixing ratio of CH4 in a nadir viewing configuration. This data will be provided by the lidar technique with no bias due to particles scattering in the light path and can directly be used as input for flux inversion models. In our presentation we will discuss the observational principle and the sampling strategy of the envisaged mission in connection to the needs for CH4 flux inversion experiments. In addition, we report on supporting campaign activities on airborne measurements of Lidar reflectivity data in the respective spectral region. The airborne data is of prime interest for the generation of pseudo CH4 data examples using the satellite instrument in order to address questions how to optimally aggregate the satellite measurements for maximum information content and minimum error. The field campaign was funded by the European Space Agency (ESA) in the framework of the A-SCOPE mission evaluation activity on active remote sensing of CO2 from space-borne platform.

Micro optical fiber light source and sensor and method of fabrication thereof

DOEpatents

Kopelman, Raoul; Tan, Weihong; Shi, Zhong-You

1997-01-01

This invention relates generally to the development of and a method of fabricating a fiber optic micro-light source and sensor (50). An optical fiber micro-light source (50) is presented whose aperture is extremely small yet able to act as an intense light source. Light sources of this type have wide ranging applications, including use as micro-sensors (22) in NSOM. Micro-sensor light sources have excellent detection limits as well as photo stability, reversibility, and millisecond response times. Furthermore, a method for manufacturing a micro optical fiber light source is provided. It involves the photo-chemical attachment of an optically active material onto the end surface of an optical fiber cable which has been pulled to form an end with an extremely narrow aperture. More specifically, photopolymerization has been applied as a means to photo-chemically attach an optically active material (60). This process allows significant control of the size of the micro light source (50). Furthermore, photo-chemically attaching an optically active material (60) enables the implementation of the micro-light source in a variety of sensor applications.

Micro optical fiber light source and sensor and method of fabrication thereof

DOEpatents

Kopelman, Raoul; Tan, Weihong; Shi, Zhong-You

1994-01-01

This invention relates generally to the development of and a method of fabricating a micro optical fiber light source. An optical fiber micro-light source is presented whose aperture is extremely small yet able to act as an intense light source. Light sources of this type have wide ranging applications, including use as micro-sensors in NSOM. Micro-sensor light sources have excellent detection limits as well as photo stability, reversibility, and millisecond response times. Furthermore, a method for manufacturing a micro optical fiber light source is provided. It involves the photo-chemical attachment of an optically active material onto the end surface of an optical fiber cable which has been pulled to form an end with an extremely narrow aperture. More specifically, photopolymerization has been applied as a means to photo-chemically attach an optically active material. This process allows significant control of the size of the micro light source. Furthermore, photo-chemically attaching an optically active material enables the implementation of the micro-light source in a variety of sensor applications.

Micro optical fiber light source and sensor and method of fabrication thereof

DOEpatents

Kopelman, R.; Tan, W.; Shi, Z.Y.

1997-05-06

This invention relates generally to the development of and a method of fabricating a fiber optic micro-light source and sensor. An optical fiber micro-light source is presented whose aperture is extremely small yet able to act as an intense light source. Light sources of this type have wide ranging applications, including use as micro-sensors in NSOM. Micro-sensor light sources have excellent detection limits as well as photo stability, reversibility, and millisecond response times. Furthermore, a method for manufacturing a micro optical fiber light source is provided. It involves the photo-chemical attachment of an optically active material onto the end surface of an optical fiber cable which has been pulled to form an end with an extremely narrow aperture. More specifically, photopolymerization has been applied as a means to photo-chemically attach an optically active material. This process allows significant control of the size of the micro light source. Furthermore, photo-chemically attaching an optically active material enables the implementation of the micro-light source in a variety of sensor applications. 10 figs.

Micro optical fiber light source and sensor and method of fabrication thereof

DOEpatents

Kopelman, R.; Tan, W.; Shi, Z.Y.

1994-11-01

This invention relates generally to the development of and a method of fabricating a micro optical fiber light source. An optical fiber micro-light source is presented whose aperture is extremely small yet able to act as an intense light source. Light sources of this type have wide ranging applications, including use as micro-sensors in NSOM. Micro-sensor light sources have excellent detection limits as well as photo stability, reversibility, and millisecond response times. Furthermore, a method for manufacturing a micro optical fiber light source is provided. It involves the photo-chemical attachment of an optically active material onto the end surface of an optical fiber cable which has been pulled to form an end with an extremely narrow aperture. More specifically, photopolymerization has been applied as a means to photo-chemically attach an optically active material. This process allows significant control of the size of the micro light source. Furthermore, photo-chemically attaching an optically active material enables the implementation of the micro-light source in a variety of sensor applications. 4 figs.

Appropriate evidence sources for populating decision analytic models within health technology assessment (HTA): a systematic review of HTA manuals and health economic guidelines.

PubMed

Zechmeister-Koss, Ingrid; Schnell-Inderst, Petra; Zauner, Günther

2014-04-01

An increasing number of evidence sources are relevant for populating decision analytic models. What is needed is detailed methodological advice on which type of data is to be used for what type of model parameter. We aim to identify standards in health technology assessment manuals and economic (modeling) guidelines on appropriate evidence sources and on the role different types of data play within a model. Documents were identified via a call among members of the International Network of Agencies for Health Technology Assessment and by hand search. We included documents from Europe, the United States, Canada, Australia, and New Zealand as well as transnational guidelines written in English or German. We systematically summarized in a narrative manner information on appropriate evidence sources for model parameters, their advantages and limitations, data identification methods, and data quality issues. A large variety of evidence sources for populating models are mentioned in the 28 documents included. They comprise research- and non-research-based sources. Valid and less appropriate sources are identified for informing different types of model parameters, such as clinical effect size, natural history of disease, resource use, unit costs, and health state utility values. Guidelines do not provide structured and detailed advice on this issue. The article does not include information from guidelines in languages other than English or German, and the information is not tailored to specific modeling techniques. The usability of guidelines and manuals for modeling could be improved by addressing the issue of evidence sources in a more structured and comprehensive format.

Since 2015 the SinoGerman research project SIGN supports water quality improvement in the Taihu region, China.

PubMed

Schmidt, Kathrin Rachel; der Beek, Tim Aus; Dai, Xiaohu; Dong, Bingzhi; Dopp, Elke; Eichinger, Florian; Hammers-Wirtz, Monika; Haußmann, Regina; Holbach, Andreas; Hollert, Henner; Illgen, Marc; Jiang, Xia; Koehler, Jan; Koester, Stephan; Korth, Andreas; Kueppers, Stephan; Li, Aili; Lohmann, Matthias; Moldaenke, Christian; Norra, Stefan; Qin, Boqiang; Qin, Yanwen; Reese, Moritz; Riehle, Edmund; Santiago-Schuebel, Beatrix; Schaefer, Charlotte; Simon, Anne; Song, Yonghui; Staaks, Christian; Steinhardt, Joerg; Subklew, Guenter; Tao, Tao; Wu, Tingfeng; Yin, Daqiang; Zhao, Fangfang; Zheng, Binghui; Zhou, Meiyue; Zou, Hua; Zuo, Jiane; Tiehm, Andreas

2016-01-01

The Taihu (Tai lake) region is one of the most economically prospering areas of China. Due to its location within this district of high anthropogenic activities, Taihu represents a drastic example of water pollution with nutrients (nitrogen, phosphate), organic contaminants and heavy metals. High nutrient levels combined with very shallow water create large eutrophication problems, threatening the drinking water supply of the surrounding cities. Within the international research project SIGN (SinoGerman Water Supply Network, www.water-sign.de), funded by the German Federal Ministry of Education and Research (BMBF), a powerful consortium of fifteen German partners is working on the overall aim of assuring good water quality from the source to the tap by taking the whole water cycle into account: The diverse research topics range from future proof strategies for urban catchment, innovative monitoring and early warning approaches for lake and drinking water, control and use of biological degradation processes, efficient water treatment technologies, adapted water distribution up to promoting sector policy by good governance. The implementation in China is warranted, since the leading Chinese research institutes as well as the most important local stakeholders, e.g. water suppliers, are involved.

LED intense headband light source for fingerprint analysis

DOEpatents

Villa-Aleman, Eliel

2005-03-08

A portable, lightweight and high-intensity light source for detecting and analyzing fingerprints during field investigation. On-site field analysis requires long hours of mobile analysis. In one embodiment, the present invention comprises a plurality of light emitting diodes; a power source; and a personal attachment means; wherein the light emitting diodes are powered by the power source, and wherein the power source and the light emitting diodes are attached to the personal attachment means to produce a personal light source for on-site analysis of latent fingerprints. The present invention is available for other applications as well.

[Development of 'Ordnungstherapie' by Bircher-Benner in naturopathy of the 20th century].

PubMed

Melzer, J; Melchart, D; Saller, R

2004-10-01

The German term 'Ordnungstherapie' is one of the five therapeutics which defines naturopathy in German-speaking countries. Who formed the term Ordnungstherapie in naturopathy and what does it mean? Heuristics and criticism of literature of the 20th century as well as database research. Nowadays in German-language medical books Ordnungstherpie belongs to the five therapeutics which define European naturopathy. Yet, the interpretation ranges from health education to body-orientated forms of psychotherapy. The term Ordnungstherapie is often related with the German priest and hydropath Sebastian Kneipp, however, term and definition have been founded by the Swiss physician Maximillian Bircher-Benner. In 1937 he defined Ordnungstherapie as a complex concept of natural healing. It is based upon the rather nosological idea that health is order/harmony in the human body (physically, psychologically), the environment and the daily course. Illness occurs if disorder appears in one of these fields. The therapeutic setting of Ordnungstherapy is defined by 9 rules of conduct to maintain order, which include nutrition, the skin as an organ (exposure to light, air, water), breathing, movement, rhythm of life, and psyche. For all these aspects Bircher-Benner himself uses the terms somatotherapy (dietotherapy, sun and light therapy, hydrotherapy, exercise therapy, breathing technique, order of the rhythm of live) and psychotherapy. He chose these complementary methods subjectively after learning them from 1897 onwards in an eclectic manner and after gaining therapeutic empiricism. Nevertheless his ideas of the Ordnungstherapie correlate with the socio-political context of the 1940ies. The term Ordnungstherapie was introduced by Bircher-Benner as an umbrella term in 1937 to describe a complex concept of naturopathic therapies. It comprises, with certain limitations for phytotherapy, the therapies which nowadays define European naturopathy. Yet, in European naturopathy today Ordnungstherapie is mostly considered as one out of 5 constituents of naturopathy (dietotherapy, hydrotherapy, exercise therapy, phytotherapy, Ordnungstherapie). The classification of Ordnungstherapie as one of the 5 pillars of the Kneipp therapy was only done by Kneipp physicians in the middle of the 20th century and needs to be thought over.

Spectral design flexibility of LED brings better life

NASA Astrophysics Data System (ADS)

Ou, Haiyan; Corell, Dennis; Ou, Yiyu; Poulsen, Peter B.; Dam-Hansen, Carsten; Petersen, Paul-Michael

2012-03-01

Light-emitting diodes (LEDs) are penetrating into the huge market of general lighting because they are energy saving and environmentally friendly. The big advantage of LED light sources, compared to traditional incandescent lamps and fluorescent light tubes, is the flexible spectral design to make white light using different color mixing schemes. The spectral design flexibility of white LED light sources will promote them for novel applications to improve the life quality of human beings. As an initial exploration to make use of the spectral design flexibility, we present an example: 'no blue' white LED light source for sufferers of disease Porphyria. An LED light source prototype, made of high brightness commercial LEDs applying an optical filter, was tested by a patient suffering from Porphyria. Preliminary results have shown that the sufferer could withstand the light source for much longer time than the standard light source. At last future perspectives on spectral design flexibility of LED light sources improving human being's life will be discussed, with focus on the light and health. The good health is ensured by the spectrum optimized so that vital hormones (melatonin and serotonin) are produced during times when they support human daily rhythm.

Regional medicine use in the Rhine basin and its implication on water quality

NASA Astrophysics Data System (ADS)

Hut, R.; Van De Giesen, N.; de Jong, S.

2011-12-01

Do Germans use more painkillers than the French? An analysis is presented relating medicine residue in the river Rhine to the amount of people living in its watershed. An extensive measuring campaign was carried out, sampling river Rhine at 42 locations from its source to the start of its delta (Dutch-German border). The samples were analyzed for 40 common pharmaceuticals. Using discharge data, digital elevation models and demographic data from Eurostat, the relation between total load of drug residue and population is analyzed. Results show regional differences in drug use as well as implications for (downstream) use of river water for drinking purposes.

Guide to Sources: American History, Anthropology, Folklore, Business Administration, Education, English, Food Science, French, German, Music, Philosophy, Political Science, Psychology, and Sociology.

ERIC Educational Resources Information Center

Maine Univ., Orono. Raymond H. Fogler Library.

This group of 13 library guides, designed to introduce the student to some of the bibliographical tools available in various subject areas at Fogler Library, is not intended to be a complete listing, but rather a selective introduction to the many sources of information available to the beginning researcher. Information is provided on the use of…

The Comparative Study: Aesthetic and Love in Hafiz and Goethe's Poetry in Order to Awaken and Bring Perfection in Global Education

ERIC Educational Resources Information Center

Sajjadi, Seyed Mahdi; Mahdavi, Zainab

2013-01-01

In the middle of eighteen century, sources of the East were considered by European visitors. Accordingly, Hafiz (c.1320-1329) was one of these sources that influenced one of the greatest poets and thinkers of German. Goethe severely in his "West-ostlicher Divan" disclosed that Hafiz's poems attracted him. In this essay, we explain…

Bode's Berlin Astronomisches Jahrbuch as a biographical source (German Title: Bodes Berliner Astronomisches Jahrbuch als biographische Quelle)

NASA Astrophysics Data System (ADS)

Schwemin, Friedhelm

2010-12-01

The appendices of the first 54 volumes (1776-1829) of the Berliner Astronomisches Jahrbuch (BAJ), edited by Johann Elert Bode, contain a plethora of biographically relevant notes, which are listed here, alphabetically sorted, in short versions. In parts, the listing possesses the quality of a primary source, and contains information on 771 persons. Many of them are poorly known or unknown.

Issues in L2: Theory as Practice/Practice as Theory. Proceedings of the Delaware Symposium on Language Studies (7th, Newark, Delaware, October 1985).

ERIC Educational Resources Information Center

Labarca, Angela, Ed.; Bailey, Leslie M., Ed.

Papers from the symposium on applied linguistics include: "Roles in the Foreign Language Classroom" (Robert J. DiPietro); "The Importance of Native Language in Light of Second-Language Studies" (Alexander Z. Guiora); "A Model of L2 Text Reconstruction: The Recall of Literary Text by Learners of German" (Elizabeth B.…

Analysis of Acousto-Optic Errors in Laser Gyroscopes.

DTIC Science & Technology

1982-12-01

2 2 Sagnac’s Interferometer ................................ 4 3 Harress ’ Prism Ring.................................... 5 4...years before Sagnac’s experiment, Harress , a German graduate student formed a ring of partially reflecting prisms to measure the dispersive properties of...glass (Figure 3). Harress noticed a fringe shift when he rotated the ring, and he assumed that the shift was caused by the *dragging" of the light

Stratospheric Observatory for Infrared Astronomy (SOFIA)

NASA Astrophysics Data System (ADS)

Becklin, E. E.

The joint U.S. and German SOFIA project to develop and operate a 2.5-meter infrared airborne telescope in a Boeing 747-SP is now in the final stages of development. First science flights will begin in 2008. The observatory is expected to operate for over 20 years. The sensitivity, characteristics, science instrument complement, and examples of 1-st light spectroscopic astrochemistry science are discussed.

Misconceptions and biases in German students' perception of multiple energy sources: implications for science education

NASA Astrophysics Data System (ADS)

Lee, Roh Pin

2016-04-01

Misconceptions and biases in energy perception could influence people's support for developments integral to the success of restructuring a nation's energy system. Science education, in equipping young adults with the cognitive skills and knowledge necessary to navigate in the confusing energy environment, could play a key role in paving the way for informed decision-making. This study examined German students' knowledge of the contribution of diverse energy sources to their nation's energy mix as well as their affective energy responses so as to identify implications for science education. Specifically, the study investigated whether and to what extent students hold mistaken beliefs about the role of multiple energy sources in their nation's energy mix, and assessed how misconceptions could act as self-generated reference points to underpin support/resistance of proposed developments. An in-depth analysis of spontaneous affective associations with five key energy sources also enabled the identification of underlying concerns driving people's energy responses and facilitated an examination of how affective perception, in acting as a heuristic, could lead to biases in energy judgment and decision-making. Finally, subgroup analysis differentiated by education and gender supported insights into a 'two culture' effect on energy perception and the challenge it poses to science education.

Light Emitting Diode Flashlights as Effective and Inexpensive Light Sources for Fluorescence Microscopy

PubMed Central

Robertson, J. Brian; Zhang, Yunfei; Johnson, Carl Hirschie

2009-01-01

Summary Light-emitting diodes (LEDs) are becoming more commonly used as light sources for fluorescence microscopy. We describe the adaptation of a commercially available LED flashlight for use as a source for fluorescence excitation. This light source is long-lived, inexpensive, and is effective for excitation in the range of 440–600 nm. PMID:19772530

Light intensity and quality from sole-source light-emitting diodes impact growth, morphology, and nutrient content of Brassica microgreens

USDA-ARS?s Scientific Manuscript database

Multi-layer vertical production systems using sole-source (SS) lighting can be used for microgreen production; however, traditional SS lighting can consume large amounts of electrical energy. Light-emitting diodes (LEDs) offer many advantages over conventional light sources including: high photoelec...

LED lamp

DOEpatents

Galvez, Miguel; Grossman, Kenneth; Betts, David

2013-11-12

There is herein described a lamp for providing white light comprising a plurality of light sources positioned on a substrate. Each of said light sources comprises a blue light emitting diode (LED) and a dome that substantially covers said LED. A first portion of said blue light from said LEDs is transmitted through said domes and a second portion of said blue light is converted into a red light by a first phosphor contained in said domes. A cover is disposed over all of said light sources that transmits at least a portion of said red and blue light emitted by said light sources. The cover contains a second phosphor that emits a yellow light in response to said blue light. The red, blue and yellow light combining to form the white light and the white light having a color rendering index (CRI) of at least about 80.

Photonic crystal light source

DOEpatents

Fleming, James G [Albuquerque, NM; Lin, Shawn-Yu [Albuquerque, NM; Bur, James A [Corrales, NM

2004-07-27

A light source is provided by a photonic crystal having an enhanced photonic density-of-states over a band of frequencies and wherein at least one of the dielectric materials of the photonic crystal has a complex dielectric constant, thereby producing enhanced light emission at the band of frequencies when the photonic crystal is heated. The dielectric material can be a metal, such as tungsten. The spectral properties of the light source can be easily tuned by modification of the photonic crystal structure and materials. The photonic crystal light source can be heated electrically or other heating means. The light source can further include additional photonic crystals that exhibit enhanced light emission at a different band of frequencies to provide for color mixing. The photonic crystal light source may have applications in optical telecommunications, information displays, energy conversion, sensors, and other optical applications.

A compact, coherent light source system architecture

NASA Astrophysics Data System (ADS)

Biedron, S. G.; Dattoli, G.; DiPalma, E.; Einstein, J.; Milton, S. V.; Petrillo, V.; Rau, J. V.; Sabia, E.; Spassovsky, I. P.; van der Slot, P. J. M.

2016-09-01

Our team has been examining several architectures for short-wavelength, coherent light sources. We are presently exploring the use and role of advanced, high-peak power lasers for both accelerating the electrons and generating a compact light source with the same laser. Our overall goal is to devise light sources that are more accessible by industry and in smaller laboratory settings. Although we cannot and do not want to compete directly with sources such as third-generation light sources or that of national-laboratory-based free-electron lasers, we have several interesting schemes that could bring useful and more coherent, short-wavelength light source to more researchers. Here, we present and discuss several results of recent simulations and our future steps for such dissemination.

The Life and Work of Joseph Fraunhofer (1787-1826)

ERIC Educational Resources Information Center

Leitner, Alfred

1975-01-01

Describes Fraunhofer's scientific career as a glass and lens maker, a discoverer of dark lines in the solar spectrum, a corrector of lens aberration, and investigator of diffraction. Gives biographical data and anecdotes. Includes a bibliography, mainly of German sources. (GH)

In search of the black swans

NASA Astrophysics Data System (ADS)

Buchanan, Mark

2009-04-01

In 1890 an electricity company enticed the German physicist Max Planck to help it in its efforts to make more efficient light bulbs. Planck, as a theorist, naturally started with the fundamentals and soon became enmeshed in the thorny problem of explaining the spectrum of black-body radiation, which he eventually did by introducing the idea - a "purely formal" assumption, as he then considered it - that electromagnetic energy can only be emitted or absorbed in discrete quanta. The rest is history. Electric light bulbs and mathematical necessity led Planck to discover quantum theory and to kick start the most significant scientific revolution of the 20th century.

Intense X-ray and EUV light source

DOEpatents

Coleman, Joshua; Ekdahl, Carl; Oertel, John

2017-06-20

An intense X-ray or EUV light source may be driven by the Smith-Purcell effect. The intense light source may utilize intense electron beams and Bragg crystals. This may allow the intense light source to range from the extreme UV range up to the hard X-ray range.

Carambola optics for recycling of light.

PubMed

Leutz, Ralf; Fu, Ling; Ries, Harald

2006-04-20

Recycling of light allows the luminance (radiance) emitted by a light source to be increased at the cost of reducing the total luminous flux (radiant power). Recycling of light means returning part of the emitted light to the source, where part of it will escape absorption. An optical design that is suitable for multiple and controlled recycling is described. Carambola optics is named for its resemblance to star fruit. Several pairs of mirrors or prisms redirect light repeatedly onto the source, thus achieving multiple transits of the light through the source. This recycled light exits the carambola in the same phase space as light directly emitted and not recycled.

700 W blue fiber-coupled diode-laser emitting at 450 nm

NASA Astrophysics Data System (ADS)

Balck, A.; Baumann, M.; Malchus, J.; Chacko, R. V.; Marfels, S.; Witte, U.; Dinakaran, D.; Ocylok, S.; Weinbach, M.; Bachert, C.; Kösters, A.; Krause, V.; König, H.; Lell, A.; Stojetz, B.; Löffler, A.; Strauss, U.

2018-02-01

A high-power blue laser source was long-awaited for processing materials with low absorption in the near infrared (NIR) spectral range like copper or gold. Due to the huge progress of GaN-based semiconductors, the performance of blue diode-lasers has made a major step forward recently. With the availability of unprecedented power levels at cw-operating blue diode-lasers emitting at 450 nm, it was possible to set up a high-power diode-laser in the blue spectral range to address these conventional laser applications and probably beyond that to establish completely new utilizations for lasers. Within the scope of the research project "BlauLas", funded within the German photonic initiative "EFFILAS" [8] by the German Federal Ministry of Education and Research (BMBF), Laserline in cooperation with OSRAM aims to realize a cw fiber-coupled diode-laser exceeding 1 kW blue laser power. In this paper the conceptual design and experimental results of a 700 W blue fiber-coupled diode-laser are presented. Initially a close look had to be taken on the mounting techniques of the semiconductors to serve the requirements of the GaN laser diodes. Early samples were used for extensive long term tests to investigate degradation processes. With first functional laser-modules we set up fiber-coupled laser-systems for further testing. Besides adaption of well-known optical concepts a main task within the development of the laser system was the selection and examination of suitable materials and assembling in order to minimize degradation and reach adequate lifetimes. We realized R&D blue lasersystems with lifetimes above 5,000 h, which enable first application experiments on processing of various materials as well as experiments on conversion to white-light.

Lighting system with thermal management system

DOEpatents

Arik, Mehmet; Weaver, Stanton Earl; Stecher, Thomas Elliot; Seeley, Charles Erklin; Kuenzler, Glenn Howard; Wolfe, Jr., Charles Franklin; Utturkar, Yogen Vishwas; Sharma, Rajdeep; Prabhakaran, Satish; Icoz, Tunc

2015-02-24

Lighting systems having unique configurations are provided. For instance, the lighting system may include a light source, a thermal management system and driver electronics, each contained within a housing structure. The light source is configured to provide illumination visible through an opening in the housing structure. The thermal management system is configured to provide an air flow, such as a unidirectional air flow, through the housing structure in order to cool the light source. The driver electronics are configured to provide power to each of the light source and the thermal management system.

Lighting system with thermal management system

DOEpatents

Arik, Mehmet; Weaver, Stanton Earl; Stecher, Thomas Elliot; Seeley, Charles Erklin; Kuenzler, Glenn Howard; Wolfe, Jr., Charles Franklin; Utturkar, Yogen Vishwas; Sharma, Rajdeep; Prabhakaran, Satish; Icoz, Tunc

2015-08-25

Lighting systems having unique configurations are provided. For instance, the lighting system may include a light source, a thermal management system and driver electronics, each contained within a housing structure. The light source is configured to provide illumination visible through an opening in the housing structure. The thermal management system is configured to provide an air flow, such as a unidirectional air flow, through the housing structure in order to cool the light source. The driver electronics are configured to provide power to each of the light source and the thermal management system.

Lighting system with thermal management system

DOEpatents

Arik, Mehmet; Weaver, Stanton; Stecher, Thomas; Seeley, Charles; Kuenzler, Glenn; Wolfe, Jr., Charles; Utturkar, Yogen; Sharma, Rajdeep; Prabhakaran, Satish; Icoz, Tunc

2013-05-07

Lighting systems having unique configurations are provided. For instance, the lighting system may include a light source, a thermal management system and driver electronics, each contained within a housing structure. The light source is configured to provide illumination visible through an opening in the housing structure. The thermal management system is configured to provide an air flow, such as a unidirectional air flow, through the housing structure in order to cool the light source. The driver electronics are configured to provide power to each of the light source and the thermal management system.

Lighting system with thermal management system

DOEpatents

Arik, Mehmet; Weaver, Stanton Earl; Stecher, Thomas Elliot; Seeley, Charles Erklin; Kuenzler, Glenn Howard; Wolfe, Jr, Charles Franklin; Utturkar, Yogen Vishwas; Sharma, Rajdeep; Prabhakaran, Satish; Icoz, Tunc

2016-10-11

Lighting systems having unique configurations are provided. For instance, the lighting system may include a light source, a thermal management system and driver electronics, each contained within a housing structure. The light source is configured to provide illumination visible through an opening in the housing structure. The thermal management system is configured to provide an air flow, such as a unidirectional air flow, through the housing structure in order to cool the light source. The driver electronics are configured to provide power to each of the light source and the thermal management system.

Assessment of the actual light dose in photodynamic therapy.

PubMed

Schaberle, Fabio A

2018-06-09

Photodynamic therapy (PDT) initiates with the absorption of light, which depends on the spectral overlap between the light source emission and the photosensitizer absorption, resulting in the number of photons absorbed, the key parameter starting PDT processes. Most papers report light doses regardless if the light is only partially absorbed or shifted relatively to the absorption peak, misleading the actual light dose value and not allowing quantitative comparisons between photosensitizers and light sources. In this manuscript a method is presented to calculate the actual light dose delivered by any light source for a given photosensitizer. This method allows comparing light doses delivered for any combination of light source (broad or narrow band or daylight) and photosensitizer. Copyright © 2018. Published by Elsevier B.V.

Shaded relief of Bahia State, Brazil

NASA Technical Reports Server (NTRS)

2000-01-01

This topographic image is the first to show the full 240-kilometer-wide (150 mile)swath collected by the Shuttle Radar Topography Mission (SRTM). The area shown is in the state of Bahia in Brazil. The semi-circular mountains along the left side of the image are the Serra Da Jacobin, which rise to 1100 meters (3600 feet) above sea level. The total relief shown is approximately 800 meters (2600 feet). The top part of the image is the Sertao, a semi-arid region, that is subject to severe droughts during El Nino events. A small portion of the San Francisco River, the longest river (1609 kilometers or 1000 miles) entirely within Brazil, cuts across the upper right corner of the image. This river is a major source of water for irrigation and hydroelectric power. Mapping such regions will allow scientists to better understand the relationships between flooding cycles, drought and human influences on ecosystems.

This shaded relief image was generated using topographic data from the Shuttle Radar Topography Mission. A computer-generated artificial light source illuminates the elevation data to produce a pattern of light and shadows. Slopes facing the light appear bright, while those facing away are shaded. On flatter surfaces, the pattern of light and shadows can reveal subtle features in the terrain. Colors show the elevation as measured by SRTM. Colors range from green at the lowest elevations to reddish at the highest elevations. Shaded relief maps are commonly used in applications such as geologic mapping and land use planning.

The Shuttle Radar Topography Mission (SRTM), launched on February 11, 2000, uses the same radar instrument that comprised the Spaceborne Imaging Radar-C/X-Band Synthetic Aperture Radar (SIR-C/X-SAR) that flew twice on the Space Shuttle Endeavour in 1994. The mission is designed to collect three-dimensional measurements of the Earth's surface. To collect the 3-D data, engineers added a 60-meter-long (200-foot) mast, an additional C-band imaging antenna and improved tracking and navigation devices. The mission is a cooperative project between the National Aeronautics and Space Administration (NASA), the National Imagery and Mapping Agency (NIMA) and the German (DLR) and Italian (ASI) space agencies. It is managed by NASA's Jet Propulsion Laboratory, Pasadena, CA, for NASA's Earth Science Enterprise, Washington, DC.

Shaded Relief of Rio Sao Francisco, Brazil

NASA Technical Reports Server (NTRS)

2000-01-01

This topographic image acquired by SRTM shows an area south of the Sao Francisco River in Brazil. The scrub forest terrain shows relief of about 400 meters (1300 feet). Areas such as these are difficult to map by traditional methods because of frequent cloud cover and local inaccessibility. This region has little topographic relief, but even subtle changes in topography have far-reaching effects on regional ecosystems. The image covers an area of 57 km x 79 km and represents one quarter of the 225 km SRTM swath. Colors range from dark blue at water level to white and brown at hill tops. The terrain features that are clearly visible in this image include tributaries of the Sao Francisco, the dark-blue branch-like features visible from top right to bottom left, and on the left edge of the image, and hills rising up from the valley floor. The San Francisco River is a major source of water for irrigation and hydroelectric power. Mapping such regions will allow scientists to better understand the relationships between flooding cycles, forestation and human influences on ecosystems.

This shaded relief image was generated using topographic data from the Shuttle Radar Topography Mission. A computer-generated artificial light source illuminates the elevation data to produce a pattern of light and shadows. Slopes facing the light appear bright, while those facing away are shaded. On flatter surfaces, the pattern of light and shadows can reveal subtle features in the terrain. Shaded relief maps are commonly used in applications such as geologic mapping and land use planning.

The Shuttle Radar Topography Mission (SRTM), launched on February 11, 2000, uses the same radar instrument that comprised the Spaceborne Imaging Radar-C/X-Band Synthetic Aperture Radar (SIR-C/X-SAR) that flew twice on the Space Shuttle Endeavour in 1994. The mission is designed to collect three-dimensional measurements of the Earth's surface. To collect the 3-D data, engineers added a 60-meter-long (200-foot) mast, an additional C-band imaging antenna and improved tracking and navigation devices. The mission is a cooperative project between the National Aeronautics and Space Administration (NASA), the National Imagery and Mapping Agency (NIMA) and the German and Italian space agencies. It is managed by NASA's Jet Propulsion Laboratory, Pasadena, CA, for NASA's Earth Science Enterprise, Washington, DC.

Estimating vaccination coverage in the absence of immunisation registers--the German experience.

PubMed

Siedler, A; Rieck, T; Reuss, A; Walter, D; Poggensee, G; Poethko-Muller, C; Reiter, S

2012-04-26

Immunisation registers are regarded as an appropriate solution to measure vaccination coverage on a population level. In Germany, a decentralised healthcare system and data protection regulations constrain such an approach. Moreover, shared responsibilities in the process of immunisation and multiple providers form the framework for public health interventions on vaccination issues. On the national level, those interventions consist mainly of conceptualising immunisation strategies, establishing vaccination programmes, and issuing recommendations. This paper provides an overview on sources and methods for collecting appropriate coverage data at national level and their public health relevance in Germany. Methods of data collection and available information on immunisations are described for three approaches: school entrance health examination, population surveys and insurance refund claim data. School entrance health examinations allow regional comparisons and estimation of trends for a specific cohort of children and for all recommended childhood vaccinations. Surveys deliver population based data on completeness and timeliness of selected vaccinations in populations defined by age or socio-demographic parameters and on knowledge and attitudes towards vaccination. Insurance refund claim data inform continuously on immunisation status (e.g. of children aged two years) or on vaccination incidence promptly after new or modified recommendations. In a complex healthcare system, the German National Public Health Institute (Robert Koch Institute, RKI) successfully compiles coverage data from different sources, which complement and validate one another. With the German approach of combining different data sources in the absence of immunisation registers, it is possible to gain solid and reliable data on the acceptance of vaccination programmes and target groups for immunisation. This approach might be of value for other countries with decentralised healthcare systems.

German urologists under national socialism.

PubMed

Krischel, Matthis

2014-08-01

The first full-time professorship for urology at a German university was established in 1937 and in 1942, a rare teaching qualification (Habilitation) for urology was granted, both at the prestigious Berlin University. At the same time, nearly a third of all physicians who worked in the field of urology were classified as "non-Aryan" according to Nazi race laws and were forced out of their profession and their homeland. Many of them committed suicide or, if they refused to flee, were murdered in concentration camps. German urologists also contributed to compulsory sterilization of men according to the "law for the prevention of hereditarily diseased offspring" between 1934 and 1945. Historical sources on the history of urology in Nazi Germany were reviewed and analyzed. These include textbooks and medical journals from the 1930s and 1940s, as well as files from different state and university archives. For urologists, the changing political environment in Germany after 1933 offered possibilities to assert their personal and professional interests. Unfortunately, in many cases, moral principles were thrown overboard, and physicians advanced their own careers and the specialty of urology at the expense of their patients and their Jewish colleagues. Under national socialism, German urologists backed Nazi health and race policies and in exchange gained further professionalization for their specialty, including university positions and increased independence from surgery. Only in recent years has this chapter of German urology's past become a topic of debate among members of the professional society.

Quantitative phase imaging of biological cells using spatially low and temporally high coherent light source.

PubMed

Ahmad, Azeem; Dubey, Vishesh; Singh, Gyanendra; Singh, Veena; Mehta, Dalip Singh

2016-04-01

In this Letter, we demonstrate quantitative phase imaging of biological samples, such as human red blood cells (RBCs) and onion cells using narrow temporal frequency and wide angular frequency spectrum light source. This type of light source was synthesized by the combined effect of spatial, angular, and temporal diversity of speckle reduction technique. The importance of using low spatial and high temporal coherence light source over the broad band and narrow band light source is that it does not require any dispersion compensation mechanism for biological samples. Further, it avoids the formation of speckle or spurious fringes which arises while using narrow band light source.

A novel amblyopia treatment system based on LED light source

NASA Astrophysics Data System (ADS)

Zhang, Xiaoqing; Chen, Qingshan; Wang, Xiaoling

2011-05-01

A novel LED (light emitting diode) light source of five different colors (white, red, green, blue and yellow) is adopted instead of conventional incandescent lamps for an amblyopia treatment system and seven training methods for rectifying amblyopia are incorporated so as for achieving an integrated therapy. The LED light source is designed to provide uniform illumination, adjustable light intensity and alterable colors. Experimental tests indicate that the LED light source operates steadily and fulfills the technical demand of amblyopia treatment.

A novel amblyopia treatment system based on LED light source

NASA Astrophysics Data System (ADS)

Zhang, Xiaoqing; Chen, Qingshan; Wang, Xiaoling

2010-12-01

A novel LED (light emitting diode) light source of five different colors (white, red, green, blue and yellow) is adopted instead of conventional incandescent lamps for an amblyopia treatment system and seven training methods for rectifying amblyopia are incorporated so as for achieving an integrated therapy. The LED light source is designed to provide uniform illumination, adjustable light intensity and alterable colors. Experimental tests indicate that the LED light source operates steadily and fulfills the technical demand of amblyopia treatment.

The Inverse-Square Law with Data Loggers

ERIC Educational Resources Information Center

Bates, Alan

2013-01-01

The inverse-square law for the intensity of light received at a distance from a light source has been verified using various experimental techniques. Typical measurements involve a manual variation of the distance between a light source and a light sensor, usually by sliding the sensor or source along a bench, measuring the source-sensor distance…

Colors of attraction: Modeling insect flight to light behavior.

PubMed

Donners, Maurice; van Grunsven, Roy H A; Groenendijk, Dick; van Langevelde, Frank; Bikker, Jan Willem; Longcore, Travis; Veenendaal, Elmar

2018-06-26

Light sources attract nocturnal flying insects, but some lamps attract more insects than others. The relation between the properties of a light source and the number of attracted insects is, however, poorly understood. We developed a model to quantify the attractiveness of light sources based on the spectral output. This model is fitted using data from field experiments that compare a large number of different light sources. We validated this model using two additional datasets, one for all insects and one excluding the numerous Diptera. Our model facilitates the development and application of light sources that attract fewer insects without the need for extensive field tests and it can be used to correct for spectral composition when formulating hypotheses on the ecological impact of artificial light. In addition, we present a tool allowing the conversion of the spectral output of light sources to their relative insect attraction based on this model. © 2018 Wiley Periodicals, Inc.

Geometrical analysis of an optical fiber bundle displacement sensor

NASA Astrophysics Data System (ADS)

Shimamoto, Atsushi; Tanaka, Kohichi

1996-12-01

The performance of a multifiber optical lever was geometrically analyzed by extending the Cook and Hamm model [Appl. Opt. 34, 5854-5860 (1995)] for a basic seven-fiber optical lever. The generalized relationships between sensitivity and the displacement detection limit to the fiber core radius, illumination irradiance, and coupling angle were obtained by analyses of three various types of light source, i.e., a parallel beam light source, an infinite plane light source, and a point light source. The analysis of the point light source was confirmed by a measurement that used the light source of a light-emitting diode. The sensitivity of the fiber-optic lever is inversely proportional to the fiber core radius, whereas the receiving light power is proportional to the number of illuminating and receiving fibers. Thus, the bundling of the finer fiber with the larger number of illuminating and receiving fibers is more effective for improving sensitivity and the displacement detection limit.

Stress rotation along pre-Cenozoic basement structures

NASA Astrophysics Data System (ADS)

Reiter, K.; Heidbach, O.; Henk, A.

2017-12-01

The in-situ stress state of the Earth's crust is under investigation since decades for both, scientific and economic purposes. Several methods have been established to indicate the contemporary orientation of the maximum compressive horizontal stress (SHmax). It is assumed that the same forces that drive plate motion are the first order stress sources and one could presume that SHmax is always parallel to plate motion, which is the case for some regions. However, deviations from this general trend occur in many regions. Therefore, second and third order sources of stress have been identified that potentially cause regional and local stress rotation with respect to the long wave-length trend imposed by plate tectonic forces. One group of such subordinate stress sources are lateral heterogeneities based on structures, petrothermal or petrophysical properties. The World Stress Map (WSM) project compiles systematically data records of the present day SHmax orientation. The increasing amount of stress orientation data allows to investigate areas with consistent stress rotation, divergent to the regional stress pattern. In our work we analyse the stress pattern variability and its causes beneath Germany. In the Molasse Basin in the Alpine foreland the SHmax orientation is perpendicular to the Alpine front as a consequence of gravitational potential energy of the orogen. SHmax is oriented in N-S direction in the central Alpine foreland and within the North German Basin. Between both, within the Mid-German Crystalline High, SHmax is divergent oriented in SE-NW direction. Neither gravitational potential energy nor petrothermal effects can be indicated as stress source. But when comparing the stress pattern with the Variscan basement structures it is obvious that SHmax is perpendicular oriented to this Palaeozoic basement structures. Therefore, petrophysical heterogeneities can be expected as reason for the observed stress rotation. Two assumptions can be made for the Mid-German Crystalline High based on this presumption. 1. The magnitude of SHmax and the minimum horizontal stress (Shmin) in the region is close by, allowing local stress rotation. 2. The stiffness contrast perpendicular to the strike of the Variscan basement structures is large enough as stress source to cause significant rotation of the stress pattern.

Olfaction and Environment: Tsimane’ of Bolivian Rainforest Have Lower Threshold of Odor Detection Than Industrialized German People

PubMed Central

Sorokowska, Agnieszka; Sorokowski, Piotr; Hummel, Thomas; Huanca, Tomas

2013-01-01

Olfactory sensitivity varies between individuals. However, data regarding cross-cultural and inter-group differences are scarce. We compared the thresholds of odor detection of the traditional society of Tsimane’ (native Amazonians of the Bolivian rainforest; n = 151) and people living in Dresden (Germany; n = 286) using “Sniffin’ Sticks” threshold subtest. Tsimane’ detected n-butanol at significantly lower concentrations than the German subjects. The distribution of thresholds of the Tsimane’ was very specific, with 25% of Tsimane’ obtaining better results in the olfactory test than any member of the German group. These data suggest that differences in olfactory sensitivity seem to be especially salient between industrialized and non-industrialized populations inhabiting different environmental conditions. We hypothesize that the possible sources of such differences are: (i) the impact of pollution which impairs the olfactory abilities of people from industrialized countries; (ii) better training of olfaction because of the higher importance of smell in traditional populations; (iii) environmental pressures shaping olfactory abilities in these populations. PMID:23922693

Olfaction and environment: Tsimane' of Bolivian rainforest have lower threshold of odor detection than industrialized German people.

PubMed

Sorokowska, Agnieszka; Sorokowski, Piotr; Hummel, Thomas; Huanca, Tomas

2013-01-01

Olfactory sensitivity varies between individuals. However, data regarding cross-cultural and inter-group differences are scarce. We compared the thresholds of odor detection of the traditional society of Tsimane' (native Amazonians of the Bolivian rainforest; n = 151) and people living in Dresden (Germany; n = 286) using "Sniffin' Sticks" threshold subtest. Tsimane' detected n-butanol at significantly lower concentrations than the German subjects. The distribution of thresholds of the Tsimane' was very specific, with 25% of Tsimane' obtaining better results in the olfactory test than any member of the German group. These data suggest that differences in olfactory sensitivity seem to be especially salient between industrialized and non-industrialized populations inhabiting different environmental conditions. We hypothesize that the possible sources of such differences are: (i) the impact of pollution which impairs the olfactory abilities of people from industrialized countries; (ii) better training of olfaction because of the higher importance of smell in traditional populations; (iii) environmental pressures shaping olfactory abilities in these populations.

Did the Germans learn from Goddard? An examination of whether the rocketry of R.H. Goddard influenced German Pre-World-War II missile development

NASA Astrophysics Data System (ADS)

Winter, Frank H.

2016-10-01

Ever since a few months before the death of American rocket pioneer Dr. Robert H. Goddard, on 10 August 1945, it has been widely claimed he was the true source of the development of the infamous V-2 rocket of World War II - the world's first large-scale liquid-propellant rocket. It is thus alleged the German developers of the V-2 had ;stolen; ideas from Goddard to create the V-2 that was also the forerunner of the world's first space launch vehicles. The question of the validity of this claim thus becomes far more significant than first appears and is the subject of this article. But we must first briefly examine other popular conceptions, or rather, misconceptions, about Goddard in our own Space Age. This helps establish a ;bigger picture; that identifies some of the problems in overall misinterpretations of Goddard that also applies to his supposed role in the development of the V-2.1

[Children, Collect Bones! : Teaching Aids and Propaganda Material on Bone-Collections and Bone-Utilisation Used in German Schools During the "Third Reich"].

PubMed

Vaupel, Elisabeth; Preiß, Florian

2018-06-05

In the nineteenth and early twentieth centuries bones were an essential raw material for the German chemical industry, vital to the production of fertilizer, glue, gelatine, soap and other products. As most of this material was imported, the German school system during the "Third Reich" took the utilisation of bones as an example to illustrate the relevance of the four-year plan of 1936 and its policy of economic self-sufficiency. The school children were encouraged to collect bones from domestic sources and bring them to the collecting points in the schools. Several NS-institutions developed a variety of teaching aids and materials to support school education on this economically and politically important topic. Focussing on the example of bone-utilisation, this paper examines the messages and intentions of these educational materials. It also demonstrates how even apparently ideologically unbiased school subjects, such as chemistry, were instrumentalised for the political indoctrination of the pupils.

Balanced bilinguals favor lexical processing in their opaque language and conversion system in their shallow language.

PubMed

Buetler, Karin A; de León Rodríguez, Diego; Laganaro, Marina; Müri, René; Nyffeler, Thomas; Spierer, Lucas; Annoni, Jean-Marie

2015-11-01

Referred to as orthographic depth, the degree of consistency of grapheme/phoneme correspondences varies across languages from high in shallow orthographies to low in deep orthographies. The present study investigates the impact of orthographic depth on reading route by analyzing evoked potentials to words in a deep (French) and shallow (German) language presented to highly proficient bilinguals. ERP analyses to German and French words revealed significant topographic modulations 240-280 ms post-stimulus onset, indicative of distinct brain networks engaged in reading over this time window. Source estimations revealed that these effects stemmed from modulations of left insular, inferior frontal and dorsolateral regions (German>French) previously associated to phonological processing. Our results show that reading in a shallow language was associated to a stronger engagement of phonological pathways than reading in a deep language. Thus, the lexical pathways favored in word reading are reinforced by phonological networks more strongly in the shallow than deep orthography. Copyright © 2015 Elsevier Inc. All rights reserved.

Glycaemic and insulinaemic properties of some German honey varieties.

PubMed

Deibert, P; König, D; Kloock, B; Groenefeld, M; Berg, A

2010-07-01

The glycaemic and insulinaemic response to different German honey varieties have not been studied so far. Eight German honey grades differing in their floral source and carbohydrate composition were tested. Isoglucidic test meals (25 g carbohydrate) and a 25 g glucose reference were given to 10 clinically and metabolically healthy, fasting individuals (31.5+/-8.1 years of age (mean+/-s.d.), two women). Glycaemic and insulinaemic index were calculated by the recommended FAO/WHO measure. Five of the eight tested honey varieties show a low glycaemic index below 55; for six of the eight tested varieties, the glycaemic load was lower than 10 (portion size of 20 g honey). Glycaemic index and insulinaemic index correlated significantly with the fructose content of honey varieties. The results show that glycaemic index and insulinaemic response depend on the fructose content of honey. Therefore, specific honey varieties may be recommended for subjects with impaired glucose tolerance instead of saccharose in food preparations.

Behavioural responses of krill and cod to artificial light in laboratory experiments

PubMed Central

Løkkeborg, S.; Humborstad, O-B.

2018-01-01

Most fishes and crustaceans respond to light, and artificial light sources may therefore be an efficient stimulus to manipulate behaviours in aquatic animals. It has been hypothesised that the catch efficiency of pots could be increased if prey, for example krill, can be attracted into the pots providing a visual stimulus and a source of live bait. To find which light characteristics are most attractive to krill, we tested the effects of light intensity and wavelength composition on Northern krill’s (Meganyctiphanes norvegica) behavioural response to an artificial light source. The most attractive individual wavelength was 530 nm (green light), while broadband (425–750 nm) white light was an equally attractive light source. The intensity of the emitted light did not appear to have a direct effect on attraction to the light source, however it did significantly increase swimming activity among the observed krill. The most promising light stimuli for krill were tested to determine whether they would have a repulsive or attractive effect on cod (Gadus morhua); These light stimuli appeared to have a slightly repulsive, but non-significant, effect on cod. However, we suggest that a swarm of krill attracted to an artificial light source may produce a more effective visual stimulus to foraging cod. PMID:29370231

Behavioural responses of krill and cod to artificial light in laboratory experiments.

PubMed

Utne-Palm, A C; Breen, M; Løkkeborg, S; Humborstad, O-B

2018-01-01

Most fishes and crustaceans respond to light, and artificial light sources may therefore be an efficient stimulus to manipulate behaviours in aquatic animals. It has been hypothesised that the catch efficiency of pots could be increased if prey, for example krill, can be attracted into the pots providing a visual stimulus and a source of live bait. To find which light characteristics are most attractive to krill, we tested the effects of light intensity and wavelength composition on Northern krill's (Meganyctiphanes norvegica) behavioural response to an artificial light source. The most attractive individual wavelength was 530 nm (green light), while broadband (425-750 nm) white light was an equally attractive light source. The intensity of the emitted light did not appear to have a direct effect on attraction to the light source, however it did significantly increase swimming activity among the observed krill. The most promising light stimuli for krill were tested to determine whether they would have a repulsive or attractive effect on cod (Gadus morhua); These light stimuli appeared to have a slightly repulsive, but non-significant, effect on cod. However, we suggest that a swarm of krill attracted to an artificial light source may produce a more effective visual stimulus to foraging cod.

Biographical Sources: Literature. Bibliographic Series No. 13.

ERIC Educational Resources Information Center

Ahrens, Joan

Items listed in this bibliography of biographical materials on writers and poets were selected from the holdings of the Arkansas University library. Organized by geographic region, citations include encyclopedias, dictionaries, handbooks, bibliographies, and directories on British, American and English speaking, European, French, German, Austrian,…

[Schizophrenia and psychosis on the internet].

PubMed

Schrank, Beate; Seyringer, Michaela-Elena; Berger, Peter; Katschnig, Heinz; Amering, Michaela

2006-09-01

The internet is an increasingly important source of information for patients concerning their illness. This has to be borne in mind concerning its growing influence on communications between patients and clinicians. The aim of this study is to assess the quality of German-language information on schizophrenia on the internet. Two searches of the terms schizophrenia and psychosis were conducted, using the Google search engine set to produce only German hits. The quality of the first hundred resulting sites was assessed according to a range of criteria, including diagnosis and therapy, links and interactive offers. Evidence-based medical information was provided by more than half of the sites resulting from the search term schizophrenia and by less than one third of psychosis hits. Information and discussion on the relationship between drugs and psychosis appeared almost exclusively under the term psychosis. It is suggested that mental health care professionals can use knowledge on what sort of information their patients are confronted with on the internet in order to assist them in profiting from this source of information.

Options for accounting carbon sequestration in German forests

PubMed Central

Krug, Joachim; Koehl, Michael; Riedel, Thomas; Bormann, Kristin; Rueter, Sebastian; Elsasser, Peter

2009-01-01

Background The Accra climate change talks held from 21–27 August 2008 in Accra, Ghana, were part of an ongoing series of meetings leading up to the Copenhagen meeting in December 2009. During the meeting a set of options for accounting carbon sequestration in forestry on a post-2012 framework was presented. The options include gross-net and net-net accounting and approaches for establishing baselines. Results This article demonstrates the embedded consequences of Accra Accounting Options for the case study of German national GHG accounting. It presents the most current assessment of sequestration rates by forest management for the period 1990 – 2007, provides an outlook of future emissions and removals (up to the year 2042) as related to three different management scenarios, and shows that implementation of some Accra options may reverse sources to sinks, or sinks to sources. Conclusion The results of the study highlight the importance of elaborating an accounting system that would prioritize the climate convention goals, not national preferences. PMID:19650896

Options for accounting carbon sequestration in German forests.

PubMed

Krug, Joachim; Koehl, Michael; Riedel, Thomas; Bormann, Kristin; Rueter, Sebastian; Elsasser, Peter

2009-08-03

The Accra climate change talks held from 21-27 August 2008 in Accra, Ghana, were part of an ongoing series of meetings leading up to the Copenhagen meeting in December 2009. During the meeting a set of options for accounting carbon sequestration in forestry on a post-2012 framework was presented. The options include gross-net and net-net accounting and approaches for establishing baselines. This article demonstrates the embedded consequences of Accra Accounting Options for the case study of German national GHG accounting. It presents the most current assessment of sequestration rates by forest management for the period 1990 - 2007, provides an outlook of future emissions and removals (up to the year 2042) as related to three different management scenarios, and shows that implementation of some Accra options may reverse sources to sinks, or sinks to sources. The results of the study highlight the importance of elaborating an accounting system that would prioritize the climate convention goals, not national preferences.

["At times I had to be an allopathic medical officer and then again I was allowed to be a homoeopathic physician." Homoeopathy and war from the Franco-German War (1870/71) to World War I (1914-1918)].

PubMed

Eisele, Philipp

2010-01-01

With its focus on the Franco-German War and World War I the present paper constitutes a first approach to the comprehensive topic of "homoeopathy and war". Sources used include articles from homoeopathic magazines, homoeopathic specialist literature, material from the estate of the homoeopathic lay organization "Hahnemannia" and individual testimonies from non-homoeopaths. The paper begins by examining the importance of the two wars for research into the history of homoeopathy compared to previous conflicts and demonstrates the value of the sources used. A brief outline of homoeopathy and the military forces in the decades before 1870 provides insight into the historical context. This is followed by the investigation of homoeopathic war hospitals at home with an analysis of the attitude of the homoeopathic physicians and lay-healers involved. The paper also describes the difficult relationship between homoeopathy and conventional medicine during the two conflicts.

White Dwarf Model Atmospheres: Synthetic Spectra for Supersoft Sources

NASA Astrophysics Data System (ADS)

Rauch, Thomas

2013-01-01

The Tübingen NLTE Model-Atmosphere Package (TMAP) calculates fully metal-line blanketed white dwarf model atmospheres and spectral energy distributions (SEDs) at a high level of sophistication. Such SEDs are easily accessible via the German Astrophysical Virtual Observatory (GAVO) service TheoSSA. We discuss applications of TMAP models to (pre) white dwarfs during the hottest stages of their stellar evolution, e.g. in the parameter range of novae and supersoft sources.

[Supplying medicines and medical equipment for the population in Poland directly after the second world war].

PubMed

Drygas, A

1995-01-01

Before the war the country's pharmaceutical industry met 35% of needs. During the war 50% of its potential was destroyed. Such was the situation after the war. The sources of the supply were at that time the German leftovers, UNRRA help, insufficient (8%) manufacturing and import. The article presents detailed data connected with sources the nationalization of pharmacies and the ways they were delt with.

Beginning of the End: The Leadership of SS Obersturmbannfuehrer Jochen Peiper

DTIC Science & Technology

2004-06-17

of Rudolf Lehmann and Ralf Tiemann on the Leibstandarte are based on the Bundesarchiven (National Archives) in Koblenz and Freiburg in Germany...Hans Schmidt, Paul Hausser, Richard Schulze-Kossens, Rudolf Lehmann, and Ralf Tiemann. Some German sources are at odds with American sources, but that...or a constitution. Among the men who set up the first military training for the Waffen-SS were Felix Steiner and Cassius Freiherr (Baron) von

High efficiency light source using solid-state emitter and down-conversion material

DOEpatents

Narendran, Nadarajah; Gu, Yimin; Freyssinier, Jean Paul

2010-10-26

A light emitting apparatus includes a source of light for emitting light; a down conversion material receiving the emitted light, and converting the emitted light into transmitted light and backward transmitted light; and an optic device configured to receive the backward transmitted light and transfer the backward transmitted light outside of the optic device. The source of light is a semiconductor light emitting diode, a laser diode (LD), or a resonant cavity light emitting diode (RCLED). The down conversion material includes one of phosphor or other material for absorbing light in one spectral region and emitting light in another spectral region. The optic device, or lens, includes light transmissive material.

Silicon micromachined broad band light source

NASA Technical Reports Server (NTRS)

George, Thomas (Inventor); Jones, Eric (Inventor); Tuma, Margaret L. (Inventor); Eastwood, Michael (Inventor); Hansler, Richard (Inventor)

2004-01-01

A micro electromechanical system (MEMS) broad band incandescent light source includes three layers: a top transmission window layer; a middle filament mount layer; and a bottom reflector layer. A tungsten filament with a spiral geometry is positioned over a hole in the middle layer. A portion of the broad band light from the heated filament is reflective off the bottom layer. Light from the filament and the reflected light of the filament are transmitted through the transmission window. The light source may operate at temperatures of 2500 K or above. The light source may be incorporated into an on board calibrator (OBC) for a spectrometer.

A two-metric proposal to specify the color-rendering properties of light sources for retail lighting

NASA Astrophysics Data System (ADS)

Freyssinier, Jean Paul; Rea, Mark

2010-08-01

Lighting plays an important role in supporting retail operations, from attracting customers, to enabling the evaluation of merchandise, to facilitating the completion of the sale. Lighting also contributes to the identity, comfort, and visual quality of a retail store. With the increasing availability and quality of white LEDs, retail lighting specifiers are now considering LED lighting in stores. The color rendering of light sources is a key factor in supporting retail lighting goals and thus influences a light source's acceptance by users and specifiers. However, there is limited information on what consumers' color preferences are, and metrics used to describe the color properties of light sources often are equivocal and fail to predict preference. The color rendering of light sources is described in the industry solely by the color rendering index (CRI), which is only indirectly related to human perception. CRI is intended to characterize the appearance of objects illuminated by the source and is increasingly being challenged because new sources are being developed with increasingly exotic spectral power distributions. This paper discusses how CRI might be augmented to better use it in support of the design objectives for retail merchandising. The proposed guidelines include the use of gamut area index as a complementary metric to CRI for assuring good color rendering.

Effect of laser speckle on light from laser diode-pumped phosphor-converted light sources.

PubMed

Aquino, Felipe; Jadwisienczak, Wojciech M; Rahman, Faiz

2017-01-10

Laser diode (LD) pumped white light sources are being developed as an alternative to light-emitting diode-pumped sources for high efficiency and/or high brightness applications. While several performance metrics of laser-pumped phosphor-converted light sources have been investigated, the effect of laser speckle has not been sufficiently explored. This paper describes our experimental studies on how laser speckle affects the behavior of light from laser-excited phosphor lamps. A single LD pumping a phosphor plate was the geometry explored in this work. Overall, our findings are that the down-converted light did not exhibit any speckle, whereas speckle was present in the residual pump light but much reduced from that in direct laser light. Furthermore, a thicker coating of small-grained phosphors served to effectively reduce speckle through static pump light diffusion in the phosphor coating. Our investigations showed that speckle is not of concern in illumination from LD-pumped phosphor-converted light sources.

Intercultural Learning in English as Foreign Language Instruction: The Importance of Teachers' Intercultural Experience and the Usefulness of Precise Instructional Directives

ERIC Educational Resources Information Center

Gobel, Kerstin; Helmke, Andreas

2010-01-01

The development of intercultural competence, especially in foreign language instruction, is considered a key goal of teaching in German schools. The present article sheds light on the teaching of intercultural topics in the context of English as a foreign language (EFL). It presents the results of an analysis of data from a larger study (DESI…

Forced Entry: Does the Current Airborne Division Still Retain This Capability Under the Light Infantry Tables of Organization and Equipment?

DTIC Science & Technology

1987-09-09

operational area there was "...a fair quota of Germans, and anF estr mate of a divisional strength. . .. ." The OB further stated that " a broker Parzer di v i...they could muster. Also, their heavy weapons were all man portable and labor intensive. This is not the case for the generic 1985 and 1986 plans. With

Optico-photographic measurements of airplane deformations

NASA Technical Reports Server (NTRS)

Kussner, Hans Georg

1931-01-01

The deformation of aircraft wings is measured by photographically recording a series of bright shots on a moving paper band sensitive to light. Alternating deformations, especially vibrations, can thus be measured in operation, unaffected by inertia. A handy recording camera, the optograph, was developed by the static division of the D.V.L. (German Experimental Institute for Aeronautics) for the employment of this method of measurement on airplanes in flight.

JPRS Report, East Europe

DTIC Science & Technology

1990-05-04

played a decisive role in preserving Romanian revolution’s victory. This is because the forces with an national identity . But now they are branding ...economy into a prosperous eco- up against private entities offering virtually identical nomic system will ultimately be a success. services, perhaps at a...tures in light industry and in brand -name consumer For CEMA countries this is a relatively new format, and goods production (the West-German Salamander

Evaluating white LEDs for outdoor landscape lighting application

NASA Astrophysics Data System (ADS)

Shakir, Insiya; Narendran, Nadarajah

2002-11-01

A laboratory experiment was conducted to understand the acceptability of different white light emitting diodes (LEDs) for outdoor landscape lighting. The study used a scaled model setup. The scene was designed to replicate the exterior of a typical upscale suburban restaurant including the exterior facade of the building, an approach with steps, and a garden. The lighting was designed to replicate light levels commonly found in nighttime outdoor conditions. The model had a central dividing partition with symmetrical scenes on both sides for side-by-side evaluations of the two scenes with different light sources. While maintaining equal luminance levels and distribution between the two scenes, four types of light sources were evaluated. These include, halogen, phosphor white LED, and two white light systems using RGB LEDs. These light sources were tested by comparing two sources at a time placed side-by-side and by individual assessment of each lighting condition. The results showed that the RGB LEDs performed equal or better than the most widely used halogen light source in this given setting. A majority of the subjects found slightly dimmer ambient lighting to be more typical for restaurants and therefore found RGB LED and halogen light sources to be more inviting. The phosphor white LEDs made the space look brighter, however a majority of the subjects disliked them.

Study on Formulation of Optimum Lighting-system for Purchasing Power at Stores

NASA Astrophysics Data System (ADS)

Fujita, Hiroki; Nakashima, Yoshio; Takamatsu, Mamoru; Oota, Masaaki; Sawa, Kazuhiro

In store lighting, difference in the look-and-feel of foods gives effects on the purchasing power of customers. This study conducted the digitalization and quantification on the effects of the variation of light-source color and illuminance used for lighting foods on image recognition on foods. As a result, it was clarified that when meat was illuminated with the light source of “pink” or “faint pink,” image evaluation on foods became higher. In addition, when illuminance increase was applied to these two light-source colors, image evaluation on “faint pink” became further higher. The reason is supposed to be that the redness of meat increased, which may have enhanced fresher impression. From this study, it has been clarified that the light-source color and illuminance optimum for each food are variant. The results show that lighting foods with the optimum light-source color and illuminance can make foods look better.

Light source comprising a common substrate, a first led device and a second led device

DOEpatents

Choong, Vi-En

2010-02-23

At least one stacked organic or polymeric light emitting diode (PLEDs) devices to comprise a light source is disclosed. At least one of the PLEDs includes a patterned cathode which has regions which transmit light. The patterned cathodes enable light emission from the PLEDs to combine together. The light source may be top or bottom emitting or both.

Hitler's bible: an analysis of the relationship between American and German eugenics in pre-war Nazi Germany.

PubMed

Brown, Susan

2009-06-01

Throughout the last century the wellbeing of those with disability has been threatened by the idea of eugenics. The most notable and extreme example of this could be considered to have been carried out during World WarTwo, within Nazi eugenic programmes. These resulted in the sterilisation and killing of hundreds of thousands of disabled people. Through research of a wide range of sources it has been established that much of the inspiration and encouragement for this rapidly progressing movement in Germany initially came from America, most notably from California. American eugenicists expressed interest, and at times jealousy, at the speed of the progression in German eugenics. German Sterilisation laws were drafted following careful study of American experiments and research, while financial support from a number of American individuals encouraged further German research. Correspondence between influential leaders, including Hitler, Grant and Whitney, Verschuer and Popenoe, on both sides also added to the developing relationship. In conclusion, although there are a number of vital differences between the progress of the eugenics programme in America and in pre-war Nazi Germany, and eugenics in America never produced the massive genocide that occurred in Germany, it is clear that the research, encouragement and enthusiasm from America had a profound influence on the rapidly growing Nazi eugenics movement.

Measuring Prosocial Tendencies in Germany: Sources of Validity and Reliablity of the Revised Prosocial Tendency Measure

PubMed Central

Rodrigues, Johannes; Ulrich, Natalie; Mussel, Patrick; Carlo, Gustavo; Hewig, Johannes

2017-01-01

The prosocial tendencies measure (PTM; Carlo and Randall, 2002) is a widely used measurement for prosocial tendencies in English speaking participants. This instrument distinguishes between six different types of prosocial tendencies that partly share some common basis, but also can be opposed to each other. To examine these constructs in Germany, a study with 1067 participants was conducted. The study investigated the structure of this German version of the PTM-R via exploratory factor analysis, confirmatory factor analysis, correlations with similar constructs in subsamples as well as via measurement invariance test concerning the original English version. The German translation showed a similar factor structure to the English version in exploratory factor analysis and in confirmatory factor analysis. Measurement invariance was found between the English and German language versions of the PTM and support for the proposed six-factor structure (altruistic, anonymous, compliant, dire, emotional and public prosocial behavior) was also found in confirmatory factor analysis. Furthermore, the expected interrelations of these factors of prosocial behavior tendencies were obtained. Finally, correlations of the prosocial behavior tendencies with validating constructs and behaviors were found. Thus, the findings stress the importance of seeing prosocial behavior not as a single dimension construct, but as a factored construct which now can also be assessed in German speaking participants. PMID:29270144

Secular change of sexually dimorphic cranial variables in Euro-Americans and Germans.

PubMed

Manthey, Laura; Jantz, Richard L; Bohnert, Michael; Jellinghaus, Katharina

2017-07-01

Crania are a reliable source for sex estimation in Euro-Americans, Europeans, and most other populations. Besides morphological assessments, the application of Fordisc® has become a useful tool within the last two decades, creating discriminant functions from morphometric data. Unfortunately, until now, white populations are mostly represented by measurements of American individuals. Therefore, classification rates are lower for European skulls than for Euro-Americans. The aim of this study was to show differences in sexual dimorphism between German and Euro-American crania. Furthermore, their secular change from the nineteenth to the twentieth century has been investigated. Analyses have been performed on glabella subtense (GLS), mastoid height (MDH), and bizygomatic breadth (ZYB). Fordisc® 3.1 was used to study sexual dimorphism and secular change, whereas SAS® was used to perform a two-level ANOVA to test for variation in sex dimorphism. Euro-Americans show greater dimorphism than Germans in all three measurements tested. This larger difference is even increasing from the late nineteenth through the late twentieth century in terms of GLS and MDH, while it stays almost the same in the present Europeans. These results explain the unsatisfying classification rates of German and other European crania on Fordisc®. Data collection for European Fordisc® samples is in progress and should improve the current situation.

DUV light source availability improvement via further enhancement of gas management technologies

NASA Astrophysics Data System (ADS)

Riggs, Daniel J.; O'Brien, Kevin; Brown, Daniel J. W.

2011-04-01

The continuous evolution of the semiconductor market necessitates ever-increasing improvements in DUV light source uptime as defined in the SEMI E10 standard. Cymer is developing technologies to exceed current and projected light source availability requirements via significant reduction in light source downtime. As an example, consider discharge chamber gas management functions which comprise a sizable portion of DUV light source downtime. Cymer's recent introduction of Gas Lifetime Extension (GLXTM) as a productivity improvement technology for its DUV lithography light sources has demonstrated noteworthy reduction in downtime. This has been achieved by reducing the frequency of full gas replenishment events from once per 100 million pulses to as low as once per 2 billion pulses. Cymer has continued to develop relevant technologies that target further reduction in downtime associated with light source gas management functions. Cymer's current subject is the development of technologies to reduce downtime associated with gas state optimization (e.g. total chamber gas pressure) and gas life duration. Current gas state optimization involves execution of a manual procedure at regular intervals throughout the lifetime of light source core components. Cymer aims to introduce a product enhancement - iGLXTM - that eliminates the need for the manual procedure and, further, achieves 4 billion pulse gas lives. Projections of uptime on DUV light sources indicate that downtime associated with gas management will be reduced by 70% when compared with GLX2. In addition to reducing downtime, iGLX reduces DUV light source cost of operation by constraining gas usage. Usage of fluorine rich Halogen gas mix has been reduced by 20% over GLX2.

Design and evaluation of excitation light source device for fluorescence endoscope

NASA Astrophysics Data System (ADS)

Lim, Hyun Soo

2009-06-01

This study aims at designing and evaluating light source devices that can stably generate light with various wavelengths in order to make possible PDD using a photosensitizer and diagnosis using auto-fluorescence. The light source was a Xenon lamp and filter wheel, composed of an optical output control through Iris and filters with several wavelength bands. It also makes the inducement of auto-fluorescence possible because it is designed to generate a wavelength band of 380-420nm, 430-480nm, and 480-560nm. The transmission part of the light source was developed to enhance the efficiency of light transmission. To evaluate this light source, the characteristics of light output and wavelength band were verified. To validate the capability of this device as PDD, the detection of auto-fluorescence using mouse models was performed.

Calibration procedures for imaging spectrometers: improving data quality from satellite missions to UAV campaigns

NASA Astrophysics Data System (ADS)

Brachmann, Johannes F. S.; Baumgartner, Andreas; Lenhard, Karim

2016-10-01

The Calibration Home Base (CHB) at the Remote Sensing Technology Institute of the German Aerospace Center (DLR-IMF) is an optical laboratory designed for the calibration of imaging spectrometers for the VNIR/SWIR wavelength range. Radiometric, spectral and geometric characterization is realized in the CHB in a precise and highly automated fashion. This allows performing a wide range of time consuming measurements in an efficient way. The implementation of ISO 9001 standards ensures a traceable quality of results. DLR-IMF will support the calibration and characterization campaign of the future German spaceborne hyperspectral imager EnMAP. In the context of this activity, a procedure for the correction of imaging artifacts, such as due to stray light, is currently being developed by DLR-IMF. Goal is the correction of in-band stray light as well as ghost images down to a level of a few digital numbers in the whole wavelength range 420-2450 nm. DLR-IMF owns a Norsk Elektro Optikks HySpex airborne imaging spectrometer system that has been thoroughly characterized. This system will be used to test stray light calibration procedures for EnMAP. Hyperspectral snapshot sensors offer the possibility to simultaneously acquire hyperspectral data in two dimensions. Recently, these rather new spectrometers have arisen much interest in the remote sensing community. Different designs are currently used for local area observation such as by use of small unmanned aerial vehicles (sUAV). In this context the CHB's measurement capabilities are currently extended such that a standard measurement procedure for these new sensors will be implemented.

Modeling of an Adjustable Beam Solid State Light Project

NASA Technical Reports Server (NTRS)

Clark, Toni

2015-01-01

This proposal is for the development of a computational model of a prototype variable beam light source using optical modeling software, Zemax Optics Studio. The variable beam light source would be designed to generate flood, spot, and directional beam patterns, while maintaining the same average power usage. The optical model would demonstrate the possibility of such a light source and its ability to address several issues: commonality of design, human task variability, and light source design process improvements. An adaptive lighting solution that utilizes the same electronics footprint and power constraints while addressing variability of lighting needed for the range of exploration tasks can save costs and allow for the development of common avionics for lighting controls.

[Electromagnetic fields of mobile telephone systems--thresholds, effects and risks for cochlear implant patients and healthy people].

PubMed

Bischof, F; Langer, J; Begall, K

2008-11-01

Every day life is detectably affected by manifold natural sources of electromagnetic fields (EMF), e. g. infrared radiation, light and the terrestrial magnetic field. However, there is still uncertainty about the consequences or hazards of artificial EMF, which emerge from mobile phone or wireless network (wireless local area network [WLAN]) services, for instance. Following recommendations of the International Commission on Non-Ionizing Radiation Protection (ICNIRP) the German Commission on Radiation Protection (SSK) defined corresponding thresholds for high frequency electromagnetic fields (HF-EMF) in 2003. By observing those thresholds HF-EMF is thought to be innocent so far. However, there is still controversial discussion about induction of cancer or neurovegetative symptoms due to inconsistent study results. Patients with cochlea implants are of particular interest within the speciality of otorhinolaryngology due to specific hazards, which arise during mobile telephone use from the distance between brain and inductive metal implants (electrode) on the one hand and the electronic system of the cochlear implant and the source of HF-EMF on the other hand. Besides many studies about the impact of HF-EMF on common welfare, there are only very few surveys (n = 6) covering the effects on patients with cochlear implants. The purpose of this paper is to overview sources, thresholds and subsequently harmful or harmless effects of HFEMF. Due to the current state of knowledge about the impact of mobile phone use on health, we assume, that HF-EMF are harmless both for healthy people and patients with cochlea implants, provided that legal thresholds are observed.

An experiment on the color rendering of different light sources

NASA Astrophysics Data System (ADS)

Fumagalli, Simonetta; Bonanomi, Cristian; Rizzi, Alessandro

2013-02-01

The color rendering index (CRI) of a light source attempts to measure how much the color appearance of objects is preserved when they are illuminated by the given light source. This problem is of great importance for various industrial and scientific fields, such as lighting architecture, design, ergonomics, etc. Usually a light source is specified through the Correlated Color Temperature or CCT. However two (or more) light sources with the same CCT but different spectral power distribution can exist. Therefore color samples viewed under two light sources with equal CCTs can appear different. Hence, the need for a method to assess the quality of a given illuminant in relation to color. Recently CRI has had a renewed interest because of the new LED-based lighting systems. They usually have a color rendering index rather low, but good preservation of color appearance and a pleasant visual appearance (visual appeal). Various attempts to develop a new color rendering index have been done so far, but still research is working for a better one. This article describes an experiment performed by human observers concerning the appearance preservation of color under some light sources, comparing it with a range of available color rendering indices.

EGR distribution and fluctuation probe based on CO.sub.2 measurements

DOEpatents

Parks, II, James E; Partridge, Jr., William P; Yoo, Ji Hyung

2015-04-07

A diagnostic system having a single-port EGR probe and a method for using the same. The system includes a light source, an EGR probe, a detector and a processor. The light source may provide a combined light beam composed of light from a mid-infrared signal source and a mid-infrared reference source. The signal source may be centered at 4.2 .mu.m and the reference source may be centered at 3.8 .mu.m. The EGR probe may be a single-port probe with internal optics and a sampling chamber with two flow cells arranged along the light path in series. The optics may include a lens for focusing the light beam and a mirror for reflecting the light beam received from a pitch optical cable to a catch optical cable. The signal and reference sources are modulated at different frequencies, thereby allowing them to be separated and the signal normalized by the processor.

Synchrotron Light Sources in Developing Countries

NASA Astrophysics Data System (ADS)

Winick, Herman; Pianetta, Piero

The more than 50 light sources in operation include facilities in Brazil, Korea, and Taiwan which started in the 1980's when they were developing countries. They came on line in the 1990's and have since trained hundreds of graduate students. They have attracted mid-career diaspora scientists to return. Growing user communities have demanded more advanced facilities, leading to higher performance new light sources that are now coming into operation. Light sources in the developing world now include the following: ∖textbf{SESAME}in the Middle East which is scheduled to start research in 2017 (∖underline {www.sesame.org}); ∖textbf{The African Light Source}, in the planning stage (∖underline {www.safricanlightsource.org}); and ∖textbf{The Mexican Light Source}, in the planning stage (∖underline {http://www.aps.org/units/fip/newsletters/201509/mexico.cfm}). See: http://wpj.sagepub.com/content/32/4/92.full.pdf +html; http://www.lightsources.org/press-release/2015/11/20/grenoble-resolutions-mark-historical-step-towards-african-light-source..

Reduction of background clutter in structured lighting systems

DOEpatents

Carlson, Jeffrey J.; Giles, Michael K.; Padilla, Denise D.; Davidson, Jr., Patrick A.; Novick, David K.; Wilson, Christopher W.

2010-06-22

Methods for segmenting the reflected light of an illumination source having a characteristic wavelength from background illumination (i.e. clutter) in structured lighting systems can comprise pulsing the light source used to illuminate a scene, pulsing the light source synchronously with the opening of a shutter in an imaging device, estimating the contribution of background clutter by interpolation of images of the scene collected at multiple spectral bands not including the characteristic wavelength and subtracting the estimated background contribution from an image of the scene comprising the wavelength of the light source and, placing a polarizing filter between the imaging device and the scene, where the illumination source can be polarized in the same orientation as the polarizing filter. Apparatus for segmenting the light of an illumination source from background illumination can comprise an illuminator, an image receiver for receiving images of multiple spectral bands, a processor for calculations and interpolations, and a polarizing filter.

Light Source Matters--Students' Explanations about the Behavior of Light When Different Light Sources Are Used in Task Assignments of Optics

ERIC Educational Resources Information Center

Kesonen, Mikko Henri Petteri; Asikainen, Mervi Anita; Hirvonen, Pekka Emil

2017-01-01

In the present article, the context-dependency of student reasoning is studied in a context of optics. We investigated introductory students' explanations about the behavior of light when different light sources, namely a small light bulb and a laser, were used in otherwise identical task assignments. The data was gathered with the aid of pretest…

[Relationship between physical activity and health in children and adolescents. Results of the German Health Interview and Examination Survey for Children and Adolescents (KiGGS) and the "Motorik-Modul" (MoMo)].

PubMed

Krug, S; Jekauc, D; Poethko-Müller, C; Woll, A; Schlaud, M

2012-01-01

The question of whether physical activity is associated with positive aspects of health becomes increasingly more important in the light of the health status in today's children and adolescents and due to the changing lifestyle with respect to everyday activity. The German Health Interview and Examination Survey for Children and Adolescents (KiGGS) collected the first set of nationwide representative cross-sectional data to examine the relationship between health and physical activity. Taking sociodemographic parameters into consideration, the results suggest a positive association between self-estimated general health and several types of physical activity. The results vary with respect to gender and type of physical activity. For methodological reasons, causal conclusions can only be drawn after longitudinal data of the second wave of KiGGS are available.

Social norm enforcement in ethnically diverse communities

PubMed Central

Zhang, Nan

2018-01-01

Recent waves of immigration to Western nations have fueled a debate over the consequences of ethnic diversity for social cohesion. One prominent argument in this debate holds that diversity is detrimental to trust and cooperation because individuals in heterogeneous communities face difficulties in enforcing social norms across ethnic lines. We examine this proposition in a field experiment involving real-life interactions among residents of multiethnic German neighborhoods. We find significant ethnic asymmetries in the pattern of norm enforcement: Members of the majority “native” German population are more active in sanctioning norm violations, while ethnic minorities are more likely to find themselves the target of sanctions. We interpret these results in light of prevailing status inequalities between ethnic minorities and the native majority. We further calculate that, as a result of ethnic discrimination, social control is likely to rise in communities with moderate minority population shares. PMID:29483253

Recording and Reading Alchemy and Art-Technology in Medieval and Premodern German Recipe Collections.

PubMed

Neven, Sylvie

2016-01-01

In the Middle Ages and the premodern period knowledge of alchemical practices and materials was transmitted via collections of recipes often grouped concomitantly with art-technological instructions. In both alchemy and chemical technology particular importance is placed on artisanal and craft practices. Both are concerned with the description of colours. Both require procedures involving precise and specifically defined actions, prescriptions and ingredients. Assuming that alchemical and artistic texts have the same textual format, this raises the question: were they produced, diffused and read by the same people? This paper investigates the authorship and the context of production behind a sample of German alchemical manuscripts dating from the fourteenth to the sixteenth century. It scrutinizes their process of production, compilation and dissemination. This paper also sheds light on the various types of marginalia, and correlates them with their diverse functions. It thus delivers significant information about the readers and users of these manuscripts.

Microelectromechanical Systems (MEMS) Broadband Light Source Developed

NASA Technical Reports Server (NTRS)

Tuma, Margaret L.

2003-01-01

A miniature, low-power broadband light source has been developed for aerospace applications, including calibrating spectrometers and powering miniature optical sensors. The initial motivation for this research was based on flight tests of a Fabry-Perot fiberoptic temperature sensor system used to detect aircraft engine exhaust gas temperature. Although the feasibility of the sensor system was proven, the commercial light source optically powering the device was identified as a critical component requiring improvement. Problems with the light source included a long stabilization time (approximately 1 hr), a large amount of heat generation, and a large input electrical power (6.5 W). Thus, we developed a new light source to enable the use of broadband optical sensors in aerospace applications. Semiconductor chip-based light sources, such as lasers and light-emitting diodes, have a relatively narrow range of emission wavelengths in comparison to incandescent sources. Incandescent light sources emit broadband radiation from visible to infrared wavelengths; the intensity at each wavelength is determined by the filament temperature and the materials chosen for the filament and the lamp window. However, present commercial incandescent light sources are large in size and inefficient, requiring several watts of electrical power to obtain the desired optical power, and they emit a large percentage of the input power as heat that must be dissipated. The miniature light source, developed jointly by the NASA Glenn Research Center, the Jet Propulsion Laboratory, and the Lighting Innovations Institute, requires one-fifth the electrical input power of some commercial light sources, while providing similar output light power that is easily coupled to an optical fiber. Furthermore, it is small, rugged, and lightweight. Microfabrication technology was used to reduce the size, weight, power consumption, and potential cost-parameters critical to future aerospace applications. This chip-based light source has the potential for monolithic fabrication with on-chip drive electronics. Other uses for these light sources are in systems for vehicle navigation, remote sensing applications such as monitoring bridges for stress, calibration sources for spectrometers, light sources for space sensors, display lighting, addressable arrays, and industrial plant monitoring. Two methods for filament fabrication are being developed: wet-chemical etching and laser ablation. Both yield a 25-mm-thick tungsten spiral filament. The proof-of-concept filament shown was fabricated with the wet etch method. Then it was tested by heating it in a vacuum chamber using about 1.25 W of electrical power; it generated bright, blackbody radiation at approximately 2650 K. The filament was packaged in Glenn's clean-room facilities. This design uses three chips vacuum-sealed with glass tape. The bottom chip consists of a reflective film deposited on silicon, the middle chip contains a tungsten filament bonded to silicon, and the top layer is a transparent window. Lifetime testing on the package will begin shortly. The emitted optical power is expected to be approximately 1.0 W with the spectral peak at 1.1 mm.

A compact high brightness laser synchrotron light source for medical applications

NASA Astrophysics Data System (ADS)

Nakajima, Kazuhisa

1999-07-01

The present high-brightness hard X-ray sources have been developed as third generation synchrotron light sources based on large high energy electron storage rings and magnetic undulators. Recently availability of compact terawatt lasers arouses a great interest in the use of lasers as undulators. The laser undulator concept makes it possible to construct an attractive compact synchrotron radiation source which has been proposed as a laser synchrotron light source. This paper proposes a compact laser synchrotron light source for mediacal applications, such as an intravenous coronary angiography and microbeam therapy.

The Use of Light-Emitting Diodes (LEDs) as Green and Red/Far-Red Light Sources in Plant Physiology.

ERIC Educational Resources Information Center

Jackson, David L.; And Others

1985-01-01

The use of green, red, and far-red light-emitting diodes (LEDs) as light sources for plant physiological studies is outlined and evaluated. Indicates that LED lamps have the advantage over conventional light sources in that they are lightweight, low-cost, portable, easily constructed, and do not require color filters. (Author/DH)

Light Source

NASA Technical Reports Server (NTRS)

1993-01-01

Research on food growth for long duration spacecraft has resulted in a light source for growing plants indoors known as Qbeam, a solid state light source consisting of a control unit and lamp. The light source, manufactured by Quantum Devices, Inc., is not very hot, although it generates high intensity radiation. When Ron Ignatius, an industrial partner of WCSAR, realized that terrestrial plant research lighting was not energy efficient enough for space use, he and WCSAR began to experiment with light emitting diodes. A line of LED products was developed, and QDI was formed to market the technology. An LED-based cancer treatment device is currently under development.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Riza, Nabeel Agha; Perez, Frank

A remote temperature sensing system includes a light source selectively producing light at two different wavelengths and a sensor device having an optical path length that varies as a function of temperature. The sensor receives light emitted by the light source and redirects the light along the optical path length. The system also includes a detector receiving redirected light from the sensor device and generating respective signals indicative of respective intensities of received redirected light corresponding to respective wavelengths of light emitted by the light source. The system also includes a processor processing the signals generated by the detector tomore » calculate a temperature of the device.« less

Illumination control apparatus for compensating solar light

NASA Technical Reports Server (NTRS)

Owens, L. J. (Inventor)

1978-01-01

An illumination control apparatus is presented for supplementing light from solar radiation with light from an artificial light source to compensate for periods of insufficient levels of solar light. The apparatus maintains a desired illumination level within an interior space comprising an artificial light source connected to an electrical power source with a switch means for selectively energizing said light source. An actuator means for controlling the on-off operation of the switch means is connected to a light sensor which responses to the illumination level of the interior space. A limit switch carried adjacent to the actuator limits the movement of the actuator within a predetermined range so as to prevent further movement thereof during detection of erroneous illumination conditions.

[German neurology and neurologists during the Third Reich: Preconditions and general framework before and after 1933].

PubMed

Martin, M; Karenberg, A; Fangerau, H

2016-08-01

This article focuses on the institutional development of neurology in Germany up to the rise to power of the National Socialists and the radical sociopolitical changes after 1933. A wide range of scattered secondary literature was assessed and evaluated. Additionally, some original sources are literally quoted and interpreted according to the context. Since the end of the nineteenth century a complicated process of separation from internal medicine and psychiatry led to the formation of a self-conscious discipline of neurology. The first generation of German neurologists succeeded in founding the German Journal for Neurology ("Deutsche Zeitschrift für Nervenheilkunde") in 1890 and their own neurological association, the Society of German Neurologists ("Gesellschaft Deutscher Nervenärzte", GDN) in 1907. On an international scale, however, the institutional implementation of neurology with only a small number of chairs and few neurology departments remained more than modest. The ambitions for autonomy ended 2 years after the change of power in 1933. Regulatory interventions by the government and psychiatric interests led to the fusion of the GDN with the psychiatric specialist society, the new association being called the Society of German Neurologists and Psychiatrists ("Gesellschaft Deutscher Neurologen und Psychiater", GDNP) in 1935. In this group psychiatrists dominated the discourse. The expulsion, imprisonment and murder of physicians declared as non-Aryan or Jewish along with the forced consolidation ("Gleichschaltung") at the universities prompted profound changes in medical and academic life. It remains an ongoing challenge of neurological historical research to measure the impact of this upheaval on the few neurology departments in hospitals and private practices.

Air Pollution Translations: A Bibliography With Abstracts - Volume 1.

ERIC Educational Resources Information Center

National Air Pollution Control Administration (DHEW), Washington, DC.

Cited are 558 references with abstracts translated from the original foreign languages, including 511 from Russian, 129 from German, and 18 from other countries. The entries are generally of a technical or advanced nature and are grouped into 13 subject areas: General, Emission Sources, Atmospheric Interaction, Measurement Methods, Control…

High-Profile Plagiarism Prompts Soul-Searching in German Universities

ERIC Educational Resources Information Center

Hockenos, Paul

2013-01-01

Rarely do political scandal and academe collide so publicly as they have now, in Europe. In February, Germany's education minister stepped down after Heinrich Heine University, in Dusseldorf, revoked her doctorate because her thesis lifted passages from other sources without proper attribution. Her departure came after scandals over plagiarized…

ACOUSTICS IN ARCHITECTURAL DESIGN, AN ANNOTATED BIBLIOGRAPHY ON ARCHITECTURAL ACOUSTICS.

ERIC Educational Resources Information Center

DOELLE, LESLIE L.

THE PURPOSE OF THIS ANNOTATED BIBLIOGRAPHY ON ARCHITECTURAL ACOUSTICS WAS--(1) TO COMPILE A CLASSIFIED BIBLIOGRAPHY, INCLUDING MOST OF THOSE PUBLICATIONS ON ARCHITECTURAL ACOUSTICS, PUBLISHED IN ENGLISH, FRENCH, AND GERMAN WHICH CAN SUPPLY A USEFUL AND UP-TO-DATE SOURCE OF INFORMATION FOR THOSE ENCOUNTERING ANY ARCHITECTURAL-ACOUSTIC DESIGN…

Health Impact Assessment(HIA)of Building Renovations at Gerena Community School, Springfield, Massachusetts

EPA Science Inventory

The US Environmental Protection Agency (EPA) has conducted an HIA at the German Gerena Community School in Springfield, MA. HIA is a six-step systematic process that uses an array of data sources, analytic methods and stakeholder input to determine the potential health effects of...

Social Structure and Social Change in Eastern Europe.

ERIC Educational Resources Information Center

Fischer, George; Schenkel, Walter

This specialized bibliography of scholarly writings since 1945 on Eastern Europe covers the countries of Albania, Bulgaria, Czechoslovakia, Greece, Hungary, Poland, Romania, and Yugoslavia. Distinct entries number about 700 and cover works published in English in the United States and Great Britain and also sources in French and German published…

Translation Assessment: Notes on the Interlingual Transfer of an Advertising Text.

ERIC Educational Resources Information Center

Horton, David

1998-01-01

Attempts to measure translation quality raise important questions about the nature of textual transfer, the relationship between source- and target-language texts, and translation functions. Examination of a typical advertising text, translated from English to German, shows the degree of freedom with which texts are manipulated in professional…

Endgame for the West in Afghanistan? Explaining the Decline in Support for the War in Afghanistan in the United States, Great Britain, Canada, Australia, France and Germany

DTIC Science & Technology

2010-06-01

lower cost—such as the “light footprint” approach based on special forces and predator drones favored by Vice-President Biden,83 or a complete with...out, is that it makes it eas- ier for opponents of the war in Germany to claim that the real reason for the German deployment is to curry favor with

Airborne Forcible Entry Operations: USAF Airlift Requirements

DTIC Science & Technology

1994-06-03

Azmy’s keystone war fighting doctrine. The June 1993 version of this document had an entire chapter dedicated to 16 force projection operations. This...until the final troop drop of the North African campaign. In that operation, 530 paratroops easily seized two lightly defended air- fields behind German...six tanks, trucks, and artillery cannons landed in ten-foot high elephant gzass, delaying their recovery for up to four hours, Figure 7 in appendix B

Detection Of Gas-Phase Polymerization in SiH4 And GeH4

NASA Technical Reports Server (NTRS)

Shing, Yuh-Han; Perry, Joseph W.; Allevato, Camillo E.

1990-01-01

Inelastic scattering of laser light found to indicate onset of gas-phase polymerization in plasma-enhanced chemical-vapor deposition (PECVD) of photoconductive amorphous hydrogenated silicon/germanium alloy (a-SiGe:H) film. In PECVD process, film deposited from radio-frequency glow-discharge plasma of silane (SiH4) and germane (GeH4) diluted with hydrogen. Gas-phase polymerization undesirable because it causes formation of particulates and defective films.

Strategies for rational utilization of bituminous coal deposits in the German Federal Republic

NASA Astrophysics Data System (ADS)

Erasmus, F. C.; Lenhartz, R.

1980-09-01

The status and economic conditions for coal mining in the GFR are examined, and the production of the individual coal regions is reviewed. Exploratory work, conducted in the light of inevitable production increases in the future, is noted. Some changes in the present coal production and utilization strategies which may be needed to meet future requirements and at the same time optimize the mining procedures are discussed.

A numerical experiment on light pollution from distant sources

NASA Astrophysics Data System (ADS)

Kocifaj, M.

2011-08-01

To predict the light pollution of the night-time sky realistically over any location or measuring point on the ground presents quite a difficult calculation task. Light pollution of the local atmosphere is caused by stray light, light loss or reflection of artificially illuminated ground objects or surfaces such as streets, advertisement boards or building interiors. Thus it depends on the size, shape, spatial distribution, radiative pattern and spectral characteristics of many neighbouring light sources. The actual state of the atmospheric environment and the orography of the surrounding terrain are also relevant. All of these factors together influence the spectral sky radiance/luminance in a complex manner. Knowledge of the directional behaviour of light pollution is especially important for the correct interpretation of astronomical observations. From a mathematical point of view, the light noise or veil luminance of a specific sky element is given by a superposition of scattered light beams. Theoretical models that simulate light pollution typically take into account all ground-based light sources, thus imposing great requirements on CPU and MEM. As shown in this paper, a contribution of distant sources to the light pollution might be essential under specific conditions of low turbidity and/or Garstang-like radiative patterns. To evaluate the convergence of the theoretical model, numerical experiments are made for different light sources, spectral bands and atmospheric conditions. It is shown that in the worst case the integration limit is approximately 100 km, but it can be significantly shortened for light sources with cosine-like radiative patterns.

Long lifetime, low intensity light source for use in nighttime viewing of equipment maps and other writings

DOEpatents

Frank, Alan M.; Edwards, William R.

1983-01-01

A long-lifetime light source with sufficiently low intensity to be used for reading a map or other writing at nighttime, while not obscuring the user's normal night vision. This light source includes a diode electrically connected in series with a small power source and a lens properly positioned to focus at least a portion of the light produced by the diode.

Collimating lens for light-emitting-diode light source based on non-imaging optics.

PubMed

Wang, Guangzhen; Wang, Lili; Li, Fuli; Zhang, Gongjian

2012-04-10

A collimating lens for a light-emitting-diode (LED) light source is an essential device widely used in lighting engineering. Lens surfaces are calculated by geometrical optics and nonimaging optics. This design progress does not rely on any software optimization and any complex iterative process. This method can be used for any type of light source not only Lambertian. The theoretical model is based on point source. But the practical LED source has a certain size. So in the simulation, an LED chip whose size is 1 mm*1 mm is used to verify the feasibility of the model. The mean results show that the lenses have a very compact structure and good collimating performance. Efficiency is defined as the ratio of the flux in the illuminated plane to the flux from LED source without considering the lens material transmission. Just investigating the loss in the designed lens surfaces, the two types of lenses have high efficiencies of more than 90% and 99%, respectively. Most lighting area (possessing 80% flux) radii are no more than 5 m when the illuminated plane is 200 m away from the light source.

Evaluation of OLED and edge-lit LED lighting panels

NASA Astrophysics Data System (ADS)

Mou, Xi; Narendran, Nadarajah; Zhu, Yiting; Freyssinier, Jean Paul

2016-09-01

Solid-state lighting (SSL) offers a new technology platform for lighting designers and end-users to illuminate spaces with low energy demand. Two types of SSL sources include organic light-emitting diodes (OLEDs) and light-emitting diodes (LEDs). OLED is an area light source, and its primary competing technology is the edge-lit LED panel. Generally, both of these technologies are considered similar in shape and appearance, but there is little understanding of how people perceive discomfort glare from large area light sources. The objective of this study was to evaluate discomfort glare for the two lighting technologies under similar operating conditions by gathering observers' reactions. The human factors study results showed no statistically significant difference in human response to discomfort glare between OLED and edge-lit LED panels when the two light sources produced the same lighting stimulus. This means both technologies appeared equally glary beyond a certain luminance.

Rare-Earth Oxide Ion (Tm3+, Ho3+, and U3+) Doped Glasses and Fibres for 1.8 to 4 Micrometer Coherent and Broadband Sources

DTIC Science & Technology

2006-07-24

oxide ( TeO2 ) , fluorine- containing silicate (SiOF2) and germanate (GeOF2) glass hosts for each dopant by characterising the spectroscopic properties...Earth Oxide Ion (Tm3+, Ho3+, And U3+) Doped Glasses And Fibres For 1.8 To 4 Micrometer Coherent And Broadband Sources 5c. PROGRAM ELEMENT NUMBER 5d...Rare-earth oxide ion (Tm3+, Ho3+, and U3+) doped glasses and fibres for 1.8 to 4 micrometer coherent and broadband sources Report prepared

Enhanced light emission near 2.7 μm from Er-Nd co-doped germanate glass

NASA Astrophysics Data System (ADS)

Bai, Gongxun; Tao, Lili; Li, Kefeng; Hu, Lili; Tsang, Yuen Hong

2013-04-01

Laser glass gain medium that can convert low cost 808 nm diode laser into 2.7 μm has attracted considerable interest due to its potential application for medical surgery fiber laser system. In this study, enhanced 2.7 μm emission has been achieved in Er3+:germanate glass by co-doping with Nd3+ ions under the excitation of an 808 nm diode laser. In the co-doped sample, the experimental results show that the harmful visible emissions via up-conversion were effectively restricted. The reduction of 1.5 μm emission was also detected in the co-doped sample, which indicates significant de-excitation of 4I13/2 Er3+ ion through energy transfer and non-radiative decay in Nd3+ ions. In conclusion, the 2.7 μm emission enhancement achieved was due to the increased optical absorption of 808 nm, efficient energy transfer (ET) with efficiency of 81.73% between Er3+ and Nd3+ ions, and shortening the lifetime of the lower lasing level 4I13/2 Er3+ in the co-doped sample. Therefore, Er3+/Nd3+ co-doped germanate glass could be used to fabricate fiber optical gain media for 2.7 μm laser generation.

Optical nulling apparatus and method for testing an optical surface

NASA Technical Reports Server (NTRS)

Olczak, Eugene (Inventor); Hannon, John J. (Inventor); Dey, Thomas W. (Inventor); Jensen, Arthur E. (Inventor)

2008-01-01

An optical nulling apparatus for testing an optical surface includes an aspheric mirror having a reflecting surface for imaging light near or onto the optical surface under test, where the aspheric mirror is configured to reduce spherical aberration of the optical surface under test. The apparatus includes a light source for emitting light toward the aspheric mirror, the light source longitudinally aligned with the aspheric mirror and the optical surface under test. The aspheric mirror is disposed between the light source and the optical surface under test, and the emitted light is reflected off the reflecting surface of the aspheric mirror and imaged near or onto the optical surface under test. An optical measuring device is disposed between the light source and the aspheric mirror, where light reflected from the optical surface under test enters the optical measuring device. An imaging mirror is disposed longitudinally between the light source and the aspheric mirror, and the imaging mirror is configured to again reflect light, which is first reflected from the reflecting surface of the aspheric mirror, onto the optical surface under test.

Flicker Vision of Selected Light Sources

NASA Astrophysics Data System (ADS)

Otomański, Przemysław; Wiczyński, Grzegorz; Zając, Bartosz

2017-10-01

The results of the laboratory research concerning a dependence of flicker vision on voltage fluctuations are presented in the paper. The research was realized on a designed measuring stand, which included an examined light source, a voltage generator with amplitude modulation supplying the light source and a positioning system of the observer with respect to the observed surface. In this research, the following light sources were used: one incandescent lamp and four LED luminaires by different producers. The research results formulate a conclusion concerning the description of the influence of voltage fluctuations on flicker viewing for selected light sources. The research results indicate that LED luminaires are less susceptible to voltage fluctuations than incandescent bulbs and that flicker vision strongly depends on the type of LED source.

Monolithic LED arrays, next generation smart lighting sources

NASA Astrophysics Data System (ADS)

Lagrange, Alexandre; Bono, Hubert; Templier, François

2016-03-01

LED have become the main light sources of the future as they open the path for intelligent use of light in time, intensity and color. In many usages, strong energy economy is done by adjusting these properties. The smart lighting has three dimensions, energy efficiency brought by GaN blue emitting LEDs, integration of electronics, sensors, microprocessors in the lighting system and development of new functionalities and services provided by the light. Monolithic LED arrays allow two major innovations, the spatial control of light emission and the adjustment of the electrical properties of the source.

High temperature, minimally invasive optical sensing modules

DOEpatents

Riza, Nabeel Agha [Oviedo, FL; Perez, Frank [Tujunga, CA

2008-02-05

A remote temperature sensing system includes a light source selectively producing light at two different wavelengths and a sensor device having an optical path length that varies as a function of temperature. The sensor receives light emitted by the light source and redirects the light along the optical path length. The system also includes a detector receiving redirected light from the sensor device and generating respective signals indicative of respective intensities of received redirected light corresponding to respective wavelengths of light emitted by the light source. The system also includes a processor processing the signals generated by the detector to calculate a temperature of the device.

Side-emitting illuminators using LED sources

NASA Astrophysics Data System (ADS)

Zhao, Feng; Van Derlofske, John F.

2003-11-01

This study investigates illuminators composed of light emitting diode (LED) array sources and side-emitting light guides to provide efficient general illumination. Specifically, new geometries are explored to increase the efficiency of current systems while maintaining desired light distribution. LED technology is already successfully applied in many illumination applications, such as traffic signals and liquid crystal display (LCD) backlighting. It provides energy-efficient, small-package, long-life, and color-adjustable illumination. However, the use of LEDs in general illumination is still in its early stages. Current side-emitting systems typically use a light guide with light sources at one end, an end-cap surface at the other end, and light releasing sidewalls. This geometry introduces efficiency loss that can be as high as 40%. The illuminators analyzed in this study use LED array sources along the longitude of a light guide to increase the system efficiency. These new geometries also provide the freedom of elongating the system without sacrificing system efficiency. In addition, alternative geometries can be used to create white light with monochromatic LED sources. As concluded by this study, the side-emitting illuminators using LED sources gives the possibility of an efficient, distribution-controllable linear lighting system.

Influence of three artificial light sources on oviposition and half-life of the Black Soldier Fly, Hermetia illucens (Diptera: Stratiomyidae): Improving small-scale indoor rearing.

PubMed

Heussler, Carina D; Walter, Andreas; Oberkofler, Hannes; Insam, Heribert; Arthofer, Wolfgang; Schlick-Steiner, Birgit C; Steiner, Florian M

2018-01-01

Hermetia illucens (L.), the Black Soldier Fly, has received increased scientific attention for its potential in circular waste management where larvae can serve as feedstuff for livestock and for biodiesel production. The flies occur naturally in (sub)-tropical and warm-temperate climates, and their mating depends on space and sunlight. Small-scale indoor rearing of Black Soldier Flies has been challenging because they react sensitive to artificial light sources and cage sizes, but recent studies have shown that small-scale rearing under artificial light is feasible. Here, we test the influence of three artificial light sources (light-emitting diodes, fluorescent lamps, and halogen lamps) on small-scale indoor rearing. Three experiments were conducted to compare oviposition traits (pre-oviposition period, total oviposition-period, and egg mass per female) and half-life among the three light sources. Oviposition did not differ among the three light sources, but male and female half-life did. Based on the performance of the light-emitting diodes and their outstanding energy efficiency, we recommend this light source for small-scale indoor rearing of Black Soldier Flies.

Characterization of edge effects in precision low-coherence interferometry using broadband light sources

NASA Astrophysics Data System (ADS)

Taudt, Ch.; Baselt, T.; Nelsen, B.; Assmann, H.; Greiner, A.; Koch, E.; Hartmann, P.

2017-06-01

Within this work an alternative approach to precision surface profilometry based on a low-coherence interferometer is presented. Special emphasis is placed on the characterization of edge effects, which influence the measurement result on sharp edges and steep slopes. In contrast to other works, this examination focuses on the comparison of very broadband light sources such as a supercontinuum white-light source (SC; 380 - 1100 nm) and a laser-driven plasma light source (LDP; 200 - 1100 nm) and their influence on the formation of these effects. The interferometer is equipped with one of these broadband light sources and a defined dispersion over a given spectral range. The spectral width of the light sources in combination with the dispersive element defines the possible measurement range and resolution. Instead of detecting the signals only in a one-dimensional manner, an imaging spectrometer on the basis of a high resolution CMOS-camera is set-up. Through the introduction of a defined dispersion, a controlled phase variation in the spectral domain is created. This phase variation is dependent on the optical path difference between both arms and can therefore be used as a measure for the height of a structure which is present in one arm. The results of measurements on a 100 nm height standard with both selected light sources have been compared. Under consideration of the coherence length of both light sources of 1.58 μm for the SC source and 1.81 m for the LDP source differences could be recorded. Especially at sharp edges, the LDP light source could record height changes with slopes twice as steep as the SC source. Furthermore, it became obvious, that measurements with the SC source tend to show edge effects like batwings due to diffraction. Additional effects on the measured roughness and the flatness of the profile were investigated and discussed.

Long lifetime, low intensity light source for use in nighttime viewing of equipment maps and other writings

DOEpatents

Frank, A.M.; Edwards, W.R.

1983-10-11

A long-lifetime light source with sufficiently low intensity to be used for reading a map or other writing at nighttime, while not obscuring the user's normal night vision is disclosed. This light source includes a diode electrically connected in series with a small power source and a lens properly positioned to focus at least a portion of the light produced by the diode. 1 fig.

Long lifetime, low intensity light source for use in nighttime viewing of equipment maps and other writings

DOEpatents

Frank, A.M.; Edwards, W.R.

1982-03-23

A long-lifetime light source is discussed with sufficiently low intensity to be used for reading a map or other writing at nightime, while not obscuring the user's normal night vision. This light source includes a diode electrically connected in series with a small power source and a lens properly positioned to focus at least a portion of the light produced by the diode.

Employees with Epilepsy

MedlinePlus

... can be exacerbated by light sources such as computer screens or fluorescent lights. Use a flicker-free ... cubicle shield Allow frequent breaks from tasks involving computer Provide alternative light sources: Replace fluorescent lights with ...

Internal heat gain from different light sources in the building lighting systems

NASA Astrophysics Data System (ADS)

Suszanowicz, Dariusz

2017-10-01

EU directives and the Construction Law have for some time required investors to report the energy consumption of buildings, and this has indeed caused low energy consumption buildings to proliferate. Of particular interest, internal heat gains from installed lighting affect the final energy consumption for heating of both public and residential buildings. This article presents the results of analyses of the electricity consumption and the luminous flux and the heat flux emitted by different types of light sources used in buildings. Incandescent light, halogen, compact fluorescent bulbs, and LED bulbs from various manufacturers were individually placed in a closed and isolated chamber, and the parameters for their functioning under identical conditions were recorded. The heat flux emitted by 1 W nominal power of each light source was determined. Based on the study results, the empirical coefficients of heat emission and energy efficiency ratios for different types of lighting sources (dependent lamp power and the light output) were designated. In the heat balance of the building, the designated rates allow for precise determination of the internal heat gains coming from lighting systems using various light sources and also enable optimization of lighting systems of buildings that are used in different ways.

Modelling of a laser-pumped light source for endoscopic surgery

NASA Astrophysics Data System (ADS)

Nadeau, Valerie J.; Elson, Daniel S.; Hanna, George B.; Neil, Mark A. A.

2008-09-01

A white light source, based on illumination of a yellow phosphor with a fibre-coupled blue-violet diode laser, has been designed and built for use in endoscopic surgery. This narrow light probe can be integrated into a standard laparoscope or inserted into the patient separately via a needle. We present a Monte Carlo model of light scattering and phosphorescence within the phosphor/silicone matrix at the probe tip, and measurements of the colour, intensity, and uniformity of the illumination. Images obtained under illumination with this light source are also presented, demonstrating the improvement in illumination quality over existing endoscopic light sources. This new approach to endoscopic lighting has the advantages of compact design, improved ergonomics, and more uniform illumination in comparison with current technologies.

A multifaceted approach to understanding dynamic urban processes: satellites, surveys, and censuses.

NASA Astrophysics Data System (ADS)

Jones, B.; Balk, D.; Montgomery, M.; Liu, Z.

2014-12-01

Urbanization will arguably be the most significant demographic trend of the 21st century, particularly in fast-growing regions of the developing world. Characterizing urbanization in a spatial context, however, is a difficult task given only the moderate resolution data provided by traditional sources of demographic data (i.e., censuses and surveys). Using a sample of five world "mega-cities" we demonstrate how new satellite data products and new analysis of existing satellite data, when combined with new applications of census and survey microdata, can reveal more about cities and urbanization in combination than either data type can by itself. In addition to the partially modelled Global Urban-Rural Mapping Project (GRUMP) urban extents we consider four sources of remotely sensed data that can be used to estimate urban extents; the NOAA Defense Meteorological Satellite Program (DMSP) Operational Linescan System (OLS) intercallibrated nighttime lights time series data, the newer NOAA Visible Infrared Imager Radiometer Suite (VIIRS) nighttime lights data, the German Aerospace Center (DLR) radar satellite data, and Dense Sampling Method (DSM) analysis of the NASA scatterometer data. Demographic data come from national censuses and/or georeferenced survey data from the Demographic & Health Survey (DHS) program. We overlay demographic and remotely sensed data (e.g., Figs 1, 2) to address two questions; (1) how well do satellite derived measures of urban intensity correlate with demographic measures, and (2) how well are temporal changes in the data correlated. Using spatial regression techniques, we then estimate statistical relationships (controlling for influences such as elevation, coastal proximity, and economic development) between the remotely sensed and demographic data and test the ability of each to predict the other. Satellite derived imagery help us to better understand the evolution of the built environment and urban form, while the underlying demographic data provide information regarding composition of urban population change. Combining these types of data yields important, high resolution spatial information that provides a more accurate understanding of urban processes.

New human biomonitoring methods for chemicals of concern-the German approach to enhance relevance.

PubMed

Kolossa-Gehring, Marike; Fiddicke, Ulrike; Leng, Gabriele; Angerer, Jürgen; Wolz, Birgit

2017-03-01

In Germany strong efforts have been made within the last years to develop new methods for human biomonitoring (HBM). The German Federal Ministry for the Environment, Nature Conservation, Building and Nuclear Safety (BMUB) and the German Chemical Industry Association e. V. (VCI) cooperate since 2010 to increase the knowledge on the internal exposure of the general population to chemicals. The projects aim is to promote human biomonitoring by developing new analytical methods Key partner of the cooperation is the German Environment Agency (UBA) which has been entrusted with the scientific coordination. Another key partner is the "HBM Expert Panel" which each year puts together a list of chemicals of interest to the project from which the Steering Committee of the project choses up to five substances for which method development will be started. Emphasis is placed on substances with either a potential health relevance or on substances to which the general population is potentially exposed to a considerable extent. The HBM Expert Panel also advises on method development. Once a method is developed, it is usually first applied to about 40 non-occupationally exposed individuals. A next step is applying the methods to different samples. Either, if the time trend is of major interest, to samples from the German Environmental Specimen Bank, or, in case exposure sources and distribution of exposure levels in the general population are the focus, the new methods are applied to samples from children and adolescents from the population representative 5th German Environmental Survey (GerES V). Results are expected in late 2018. This article describes the challenges faced during method development and solutions found. An overview presents the 34 selected substances, the 14 methods developed and the 7 HBM-I values derived in the period from 2010 to mid 2016. Copyright © 2016 The Authors. Published by Elsevier GmbH.. All rights reserved.

Longitudinal spatial coherence gated high-resolution tomography and quantitative phase microscopy of biological cells and tissues with uniform illumination

NASA Astrophysics Data System (ADS)

Mehta, Dalip Singh; Ahmad, Azeem; Dubey, Vishesh; Singh, Veena; Butola, Ankit; Mohanty, Tonmoy; Nandi, Sreyankar

2018-02-01

We report longitudinal spatial coherence (LSC) gated high-resolution tomography and quantitative phase microscopy of biological cells and tissues with uniform illumination using laser as a light source. To accomplish this a pseudo thermal light source was synthesized by passing laser beams through an optical system, which is basically a speckle reduction system with combined effect of spatial, temporal, angular and polarisation diversity. The longitudinal spatial coherence length of such light was significantly reduced by synthesizing a pseudo thermal source with the combined effect of spatial, angular and temporal diversity. This results in a low spatially coherent (i.e., broad angular frequency spectrum) light source with narrow temporal frequency spectrum. Light from such a pseudo thermal light source was passed through an interference microscope with varying magnification, such as, 10X and 50X. The interference microscope was used for full-field OCT imaging of multilayer objects and topography of industrial objects. Experimental results of optical sectioning of multilayer biological objects with high axial-resolution less than 10μm was achieved which is comparable to broadband white light source. The synthesized light source with reduced speckles having uniform illumination on the sample, which can be very useful for fluorescence microscopy as well as quantitative phase microscopy with less phase noise. The present system does not require any dispersion compensation optical system for biological samples as a highly monochromatic light source is used.

Microwave-driven ultraviolet light sources

DOEpatents

Manos, Dennis M.; Diggs, Jessie; Ametepe, Joseph D.

2002-01-29

A microwave-driven ultraviolet (UV) light source is provided. The light source comprises an over-moded microwave cavity having at least one discharge bulb disposed within the microwave cavity. At least one magnetron probe is coupled directly to the microwave cavity.

Development of multiwavelength excitation light source for autofluorescence and photodynamic diagnosis systems

NASA Astrophysics Data System (ADS)

Kenar, Necla; Lim, H. S.; Mirzaaghasi, Amin

2014-02-01

New design of the excitation light source that can stably generate light with center wavelengths of 450nm, 530nm, 632.8nm and white light for auto-fluorescence(AF) and photodynamic diagnosis(PDD) of cancer in clinics in a single system is presented in this study. The light source consists of Xenon Lamp (300W), light guide module including motorize filter wheel equipped with optical filters with corresponding to wavelength bands, servo motor, motorize iris, a cooling system, power supply and optical transmission part for the output light. The transmission part of the light source was developed to collimate the light with desired wavelength into input of fiber optic. Output powers are obtained average 99.91 mW for 450+/-40 nm, 111.01 mW for 530+/-10nm, and 78.50 mW for 632.8+/-10nm.

High power LED standard light sources for photometric applications

NASA Astrophysics Data System (ADS)

Ivashin, Evgeniy; Ogarev, Sergey; Khlevnoy, Boris; Shirokov, Stanislav; Dobroserdov, Dmitry; Sapritsky, Victor

2018-02-01

High power LED light sources have been developed as possible new VNIIOFI standard sources for luminous intensity, luminous flux and colour measurements. Stability, repeatability and spatial uniformity of the sources were investigated and demonstrated high accuracy and homogeneity. The paper describes different tests on one of the manufactured sources. In the future, these LED light sources are planned to be used as standard luminous flux sources to transfer the units of luminous intensity and luminous flux from gonio-spectrometer to sphere-spectrometer.

Towards a More Accurate Solar Power Forecast By Improving NWP Model Physics

NASA Astrophysics Data System (ADS)

Köhler, C.; Lee, D.; Steiner, A.; Ritter, B.

2014-12-01

The growing importance and successive expansion of renewable energies raise new challenges for decision makers, transmission system operators, scientists and many more. In this interdisciplinary field, the role of Numerical Weather Prediction (NWP) is to reduce the uncertainties associated with the large share of weather-dependent power sources. Precise power forecast, well-timed energy trading on the stock market, and electrical grid stability can be maintained. The research project EWeLiNE is a collaboration of the German Weather Service (DWD), the Fraunhofer Institute (IWES) and three German transmission system operators (TSOs). Together, wind and photovoltaic (PV) power forecasts shall be improved by combining optimized NWP and enhanced power forecast models. The conducted work focuses on the identification of critical weather situations and the associated errors in the German regional NWP model COSMO-DE. Not only the representation of the model cloud characteristics, but also special events like Sahara dust over Germany and the solar eclipse in 2015 are treated and their effect on solar power accounted for. An overview of the EWeLiNE project and results of the ongoing research will be presented.

Exploring the positions of German and Israeli patient organizations in the bioethical context of end-of-life policies.

PubMed

Raz, Aviad; Jordan, Isabella; Schicktanz, Silke

2014-06-01

Patient organizations are increasingly involved in national and international bioethical debates and health policy deliberations. In order to examine how and to what extent cultural factors and organizational contexts influence the positions of patient organizations, this study compares the positions of German and Israeli patient organizations (POs) on issues related to end-of-life medical care. We draw on a qualitative pilot study of thirteen POs, using as a unit of analysis pairs comprised of one German PO and one Israeli PO that were matched on the basis of organizational category. Bioethical positions that emanated from the interviews concerned advance directives--general views, recent legal framework, and formalization; as well as active and passive euthanasia, withholding and withdrawing of treatment, and physician-assisted suicide. In addition to the unifying, within-country impact of cultural factors, we found that constituency-based organizations and partner organizations in both countries often share common views, whereas disease-based support organizations have very heterogeneous positions. We conclude by discussing how organizational contexts provide a source of uniformity as well as diversity in the positions of POs.

Securing a web-based teleradiology platform according to German law and "best practices".

PubMed

Spitzer, Michael; Ullrich, Tobias; Ueckert, Frank

2009-01-01

The Medical Data and Picture Exchange platform (MDPE), as a teleradiology system, facilitates the exchange of digital medical imaging data among authorized users. It features extensive support of the DICOM standard including networking functions. Since MDPE is designed as a web service, security and confidentiality of data and communication pose an outstanding challenge. To comply with demands of German laws and authorities, a generic data security concept considered as "best practice" in German health telematics was adapted to the specific demands of MDPE. The concept features strict logical and physical separation of diagnostic and identity data and thus an all-encompassing pseudonymization throughout the system. Hence, data may only be merged at authorized clients. MDPE's solution of merging data from separate sources within a web browser avoids technically questionable techniques such as deliberate cross-site scripting. Instead, data is merged dynamically by JavaScriptlets running in the user's browser. These scriptlets are provided by one server, while content and method calls are generated by another server. Additionally, MDPE uses encrypted temporary IDs for communication and merging of data.

A technique for phase correction in Fourier transform spectroscopy

NASA Astrophysics Data System (ADS)

Artsang, P.; Pongchalee, P.; Palawong, K.; Buisset, C.; Meemon, P.

2018-03-01

Fourier transform spectroscopy (FTS) is a type of spectroscopy that can be used to analyze components in the sample. The basic setup that is commonly used in this technique is "Michelson interferometer". The interference signal obtained from interferometer can be Fourier transformed into the spectral pattern of the illuminating light source. To experimentally study the concept of the Fourier transform spectroscopy, the project started by setup the Michelson interferometer in the laboratory. The implemented system used a broadband light source in near infrared region (0.81-0.89 μm) and controlled the movable mirror by using computer controlled motorized translation stage. In the early study, there is no sample the interference path. Therefore, the theoretical spectral results after the Fourier transformation of the captured interferogram must be the spectral shape of the light source. One main challenge of the FTS is to retrieve the correct phase information of the inferferogram that relates with the correct spectral shape of the light source. One main source of the phase distortion in FTS that we observed from our system is the non-linear movement of the movable reference mirror of the Michelson interferometer. Therefore, to improve the result, we coupled a monochromatic light source to the implemented interferometer. We simultaneously measured the interferograms of the monochromatic and broadband light sources. The interferogram of the monochromatic light source was used to correct the phase of the interferogram of the broadband light source. The result shows significant improvement in the computed spectral shape.

A novel semiconductor-based, fully incoherent amplified spontaneous emission light source for ghost imaging

PubMed Central

Hartmann, Sébastien; Elsäßer, Wolfgang

2017-01-01

Initially, ghost imaging (GI) was demonstrated with entangled light from parametric down conversion. Later, classical light sources were introduced with the development of thermal light GI concepts. State-of-the-art classical GI light sources rely either on complex combinations of coherent light with spatially randomizing optical elements or on incoherent lamps with monochromating optics, however suffering strong losses of efficiency and directionality. Here, a broad-area superluminescent diode is proposed as a new light source for classical ghost imaging. The coherence behavior of this spectrally broadband emitting opto-electronic light source is investigated in detail. An interferometric two-photon detection technique is exploited in order to resolve the ultra-short correlation timescales. We thereby quantify the coherence time, the photon statistics as well as the number of spatial modes unveiling a complete incoherent light behavior. With a one-dimensional proof-of-principle GI experiment, we introduce these compact emitters to the field which could be beneficial for high-speed GI systems as well as for long range GI sensing in future applications. PMID:28150737

Spatial Light Modulators as Optical Crossbar Switches

NASA Technical Reports Server (NTRS)

Juday, Richard

2003-01-01

A proposed method of implementing cross connections in an optical communication network is based on the use of a spatial light modulator (SLM) to form controlled diffraction patterns that connect inputs (light sources) and outputs (light sinks). Sources would typically include optical fibers and/or light-emitting diodes; sinks would typically include optical fibers and/or photodetectors. The sources and/or sinks could be distributed in two dimensions; that is, on planes. Alternatively or in addition, sources and/or sinks could be distributed in three dimensions -- for example, on curved surfaces or in more complex (including random) three-dimensional patterns.

Comparative Study of Light Sources for Household

NASA Astrophysics Data System (ADS)

Pawlak, Andrzej; Zalesińska, Małgorzata

2017-03-01

The article describes test results that provided the ground to define and evaluate basic photometric, colorimetric and electric parameters of selected, widely available light sources, which are equivalent to a traditional incandescent 60-Watt light bulb. Overall, one halogen light bulb, three compact fluorescent lamps and eleven LED light sources were tested. In general, it was concluded that in most cases (branded products, in particular) the measured and calculated parameters differ from the values declared by manufacturers only to a small degree. LED sources prove to be the most beneficial substitute for traditional light bulbs, considering both their operational parameters and their price, which is comparable with the price of compact fluorescent lamps or, in some instances, even lower.

Sources of Legal Liability among Physical Education Teachers

ERIC Educational Resources Information Center

Babalola, Alla Joseph; Alayode, Ajibua Michael

2012-01-01

Legal issues in Physical Education are very germane to sport and physical activity development. Consequently, Physical Education teachers should be involved in studying laws that relates to P.E in the course of their professional preparation. It is worth noting that today, people are becoming more aware of their rights under the law. This has…

Did the American Herbartians Have a Research Base?

ERIC Educational Resources Information Center

Westfall, Barry H.

The origins of the Herbartian Movement began with the writings of Johan Friedrich Herbart (1776-1841), a German philosopher and educator. He believed that, through instruction, the mind and morals of the child could be molded. For this purpose, ideas are available from two sources: experience, which furnishes knowledge of nature, and social…

Students' Choice of Universities in Germany: Structure, Factors and Information Sources Used

ERIC Educational Resources Information Center

Obermeit, Katrin

2012-01-01

Student recruitment is an increasingly important topic for universities worldwide. But in order to develop sophisticated recruitment strategies, recruitment officers need to have a clear understanding of how and why students choose colleges. This review compares the German and US research concerning university choice models, choice criteria and…

Polarization Dependent Whispering Gallery Modes in Microspheres

NASA Technical Reports Server (NTRS)

Adamovsky, Grigory (Inventor); Wrbanek, Susan Y. (Inventor)

2016-01-01

A tunable resonant system is provided and includes a microsphere that receives an incident portion of a light beam generated via a light source, the light beam having a fundamental mode, a waveguide medium that transmits the light beam from the light source to the microsphere, and a polarizer disposed in a path of the waveguide between the light source and the microsphere. The incident portion of the light beam creates a fundamental resonance inside the microsphere. A change in a normalized frequency of the wavelength creates a secondary mode in the waveguide and the secondary mode creates a secondary resonance inside the microsphere.

Particle measurement systems and methods

DOEpatents

Steele, Paul T [Livermore, CA

2011-10-04

A system according to one embodiment includes a light source for generating light fringes; a sampling mechanism for directing a particle through the light fringes; and at least one light detector for detecting light scattered by the particle as the particle passes through the light fringes. A method according to one embodiment includes generating light fringes using a light source; directing a particle through the light fringes; and detecting light scattered by the particle as the particle passes through the light fringes using at least one light detector.

Ceres in Color

NASA Image and Video Library

2016-11-18

This image of Ceres approximates how the dwarf planet's colors would appear to the eye. This view of Ceres, produced by the German Aerospace Center in Berlin, combines images taken during Dawn's first science orbit in 2015 using the framing camera's red, green and blue spectral filters. The color was calculated using a reflectance spectrum, which is based on the way that Ceres reflects different wavelengths of light and the solar wavelengths that illuminate Ceres. http://photojournal.jpl.nasa.gov/catalog/PIA21079

Considerations for Operations on Urban Terrain by Light Forces

DTIC Science & Technology

1985-01-01

precaution to make themselves "less detecta.ble* in the city. Some, because of the way in which they draped belts of ammunition over themse es...German Infantry Weapons of world Wa_ !I. London: 4rms and Armour Press, 1969. Bavly. Dan. Fire in Beirut. Briarcliff Manor: Stein and Day Publishers, 1984...Echelon.* Unpublished paper, Fort Leavenworth, 1983. Smith, Field Officer R.G. "The Soviet Armoured threat and NATO Anti- Armour capabilities." The- Army

New Agents for the Extinguishment of Magnesium Fires.

DTIC Science & Technology

1978-04-01

34 23 July 1942. German Patent 724,795. 8. Beythien, R., Wienhaus, H., and von Zehman, H., "Extinguish- ing Magnesium and Other Light Metal Fires ," 12...34Trimethoxyboroxine--An Extinguishing Agent for Metal Fires ," ACS Advances in Chemistry, No. 23, American Chemical Society, Washington, D.C. pp 158...13. Miyashima, Z., "Fire Extinguishing Agent," 7 October 1958. Japanese Patent 8,946. 14. Jenkner, H., "Extinguishing Metal Fires ," 12 September

Investigation on RGB laser source applied to dynamic photoelastic experiment

NASA Astrophysics Data System (ADS)

Li, Songgang; Yang, Guobiao; Zeng, Weiming

2014-06-01

When the elastomer sustains the shock load or the blast load, its internal stress state of every point will change rapidly over time. Dynamic photoelasticity method is an experimental stress analysis method, which researches the dynamic stress and the stress wave propagation. Light source is one of very important device in dynamic photoelastic experiment system, and the RGB laser light source applied in dynamic photoelastic experiment system is innovative and evolutive to the system. RGB laser is synthesized by red laser, green laser and blue laser, either as a single wavelength laser light source, also as synthesized white laser light source. RGB laser as a light source for dynamic photoelastic experiment system, the colored isochromatic can be captured in dynamic photoelastic experiment, and even the black zero-level stripe can be collected, and the isoclinics can also be collected, which conducively analysis and study of transient stress and stress wave propagation. RGB laser is highly stable and continuous output, and its power can be adjusted. The three wavelengths laser can be synthesized by different power ratio. RGB laser light source used in dynamic photoelastic experiment has overcome a number of deficiencies and shortcomings of other light sources, and simplifies dynamic photoelastic experiment, which has achieved good results.

Research on starlight hardware-in-the-loop simulator

NASA Astrophysics Data System (ADS)

Zhang, Ying; Gao, Yang; Qu, Huiyang; Liu, Dongfang; Du, Huijie; Lei, Jie

2016-10-01

The starlight navigation is considered to be one of the most important methods for spacecraft navigation. Starlight simulation system is a high-precision system with large fields of view, designed to test the starlight navigation sensor performance on the ground. A complete hardware-in-the-loop simulation of the system has been built. The starlight simulator is made up of light source, light source controller, light filter, LCD, collimator and control computer. LCD is the key display component of the system, and is installed at the focal point of the collimator. For the LCD cannot emit light itself, so light source and light source power controller is specially designed for the brightness demanded by the LCD. Light filter is designed for the dark background which is also needed in the simulation.

National Synchrotron Light Source

ScienceCinema

BNL

2017-12-09

A tour of Brookhaven's National Synchrotron Light Source (NSLS), hosted by Associate Laboratory Director for Light Sources, Stephen Dierker. The NSLS is one of the world's most widely used scientific research facilities, hosting more than 2,500 guest researchers each year. The NSLS provides intense beams of infrared, ultraviolet, and x-ray light for basic and applied research in physics, chemistry, medicine, geophysics, environmental, and materials sciences.

Spectral matching research for light-emitting diode-based neonatal jaundice therapeutic device light source

NASA Astrophysics Data System (ADS)

Gan, Ruting; Guo, Zhenning; Lin, Jieben

2015-09-01

To decrease the risk of bilirubin encephalopathy and minimize the need for exchange transfusions, we report a novel design for light source of light-emitting diode (LED)-based neonatal jaundice therapeutic device (NJTD). The bilirubin absorption spectrum in vivo was regarded as target. Based on spectral constructing theory, we used commercially available LEDs with different peak wavelengths and full width at half maximum as matching light sources. Simple genetic algorithm was first proposed as the spectral matching method. The required LEDs number at each peak wavelength was calculated, and then, the commercial light source sample model of the device was fabricated to confirm the spectral matching technology. In addition, the corresponding spectrum was measured and the effect was analyzed finally. The results showed that fitted spectrum was very similar to the target spectrum with 98.86 % matching degree, and the actual device model has a spectrum close to the target with 96.02 % matching degree. With higher fitting degree and efficiency, this matching algorithm is very suitable for light source matching technology of LED-based spectral distribution, and bilirubin absorption spectrum in vivo will be auspicious candidate for the target spectrum of new LED-based NJTD light source.

A comparison of color fidelity metrics for light sources using simulation of color samples under lighting conditions

NASA Astrophysics Data System (ADS)

Kwon, Hyeokjun; Kang, Yoojin; Jang, Junwoo

2017-09-01

Color fidelity has been used as one of indices to evaluate the performance of light sources. Since the Color Rendering Index (CRI) was proposed at CIE, many color fidelity metrics have been proposed to increase the accuracy of the metric. This paper focuses on a comparison of the color fidelity metrics in an aspect of accuracy with human visual assessments. To visually evaluate the color fidelity of light sources, we made a simulator that reproduces the color samples under lighting conditions. In this paper, eighteen color samples of the Macbeth color checker under test light sources and reference illuminant for each of them are simulated and displayed on a well-characterized monitor. With only a spectrum set of the test light source and reference illuminant, color samples under any lighting condition can be reproduced. In this paper, the spectrums of the two LED and two OLED light sources that have similar values of CRI are used for the visual assessment. In addition, the results of the visual assessment are compared with the two color fidelity metrics that include CRI and IES TM-30-15 (Rf), proposed by Illuminating Engineering Society (IES) in 2015. Experimental results indicate that Rf outperforms CRI in terms of the correlation with visual assessment.

Ideology and ethics. The perversion of German psychiatrists' ethics by the ideology of national socialism.

PubMed

Singer, L

1998-01-01

As soon as Adolf Hitler came to into power in 1933, four laws on racial segregation and race protection were edicted between 1934 and 1935. Schizophrenia, manic-depressive psychoses, epilepsy and alcoholism were regarded as hereditary mental illnesses. These laws were responsible for the sterilisation of 350,000 individuals who were thought to be at the source of the propagation of hereditary illnesses which might endanger the health and the future of the Aryan Germans. On September 1, 1939, Action T4 was launched: it required that all the mentally ill be exterminated. This action, which was run by the highest level of the Reich's chancellery with the help of psychiatrists coming from all backgrounds including university professors, was supposed to grant a serene death to all the mentally ill considered as untreatable. The death sentences were carried out by the medical staff in psychiatric hospitals specially equipped with gas chambers. Following protests, Action T4 was officially stopped on August 24, 1941, but, in reality, continued until the end of the war. The death sentences were carried out using either lethal doses of medication or food deprivation. One hundred and fifty thousand individuals fell victim to that therapeutic extermination which played an economic role as important as the one deemed to social protection. Many German academics, researchers, psychiatrists, geneticians and anthropologists played and active part in these murders which were carried out in the name of Nazi ideology based upon the supremacy of the Northern Germanic race and the necessity to protect it from miscegenation, especially from Jews. In the final part of this paper, the author gives an explanation of the perversion of ethics carried out by German psychiatrists.

Light-Emitting Diodes and Cool White Fluorescent Light Similarly Suppress Pineal Gland Melatonin and Maintain Retinal Function and Morphology in the Rat. Part 1

NASA Technical Reports Server (NTRS)

Holley, Daniel C.; Heeke, D.; Mele, G.

1999-01-01

Currently, the light sources most commonly used in animal habitat lighting are cool white fluorescent or incandescent lamps. We evaluated a novel light-emitting diode (LED) light source for use in animal habitat lighting by comparing its effectiveness to cool white fluorescent light (CWF) in suppressing pineal gland melatonin and maintaining normal retinal physiology and morphology in the rat. Results of pineal melatonin suppression experiments showed equal suppression of pineal melatonin concentrations for LED light and CWF light at five different light illuminances (100, 40, 10, 1 and 0.1 lux). There were no significant differences in melatonin suppression between LED and CWF light when compared to unexposed controls. Retinal physiology was evaluated using electroretinography. Results show no differences in a-wave implicit times and amplitudes or b-wave implicit times and amplitudes between 100-lux LED-exposed rats and 100-lux CWF-exposed rats. Results of retinal histology assessment show no differences in retinal thickness rod outer segment length and number of rod nuclei between rats exposed to 100-lux LED and 100-lux CWF for days. Furthermore, the retinal pigmented epithelium and rod outer segments of all eyes observed were in good condition and of normal thickness. This study indicates that LED light does not cause retinal damage and can suppress pineal melatonin at similar intensities as a conventional CWF light source. These data suggest that LED light sources may be suitable replacements for conventional light sources used in the lighting of rodent vivariums while providing many mechanical and economical advantages.

Spectral characteristics of light sources for S-cone stimulation.

PubMed

Schlegelmilch, F; Nolte, R; Schellhorn, K; Husar, P; Henning, G; Tornow, R P

2002-11-01

Electrophysiological investigations of the short-wavelength sensitive pathway of the human eye require the use of a suitable light source as a S-cone stimulator. Different light sources with their spectral distribution properties were investigated and compared with the ideal S-cone stimulator. First, the theoretical background of the calculation of relative cone energy absorption from the spectral distribution function of the light source is summarized. From the results of the calculation, the photometric properties of the ideal S-cone stimulator will be derived. The calculation procedure was applied to virtual light sources (computer generated spectral distribution functions with different medium wavelengths and spectrum widths) and to real light sources (blue and green light emitting diodes, blue phosphor of CRT-monitor, multimedia projector, LCD monitor and notebook display). The calculated relative cone absorbencies are compared to the conditions of an ideal S-cone stimulator. Monochromatic light sources with wavelengths of less than 456 nm are close to the conditions of an ideal S-cone stimulator. Spectrum widths up to 21 nm do not affect the S-cone activation significantly (S-cone activation change < 0.2%). Blue light emitting diodes with peak wavelength at 448 nm and spectrum bandwidth of 25 nm are very useful for S-cone stimulation (S-cone activation approximately 95%). A suitable display for S-cone stimulation is the Trinitron computer monitor (S-cone activation approximately 87%). The multimedia projector has a S-cone activation up to 91%, but their spectral distribution properties depends on the selected intensity. LCD monitor and notebook displays have a lower S-cone activation (< or = 74%). Carefully selecting the blue light source for S-cone stimulation can reduce the unwanted L-and M-cone activation down to 4% for M-cones and 1.5% for L-cones.

Validation of alternate light sources for detection of bruises in non-embalmed and embalmed cadavers.

PubMed

Olds, Kelly; Byard, Roger W; Winskog, Calle; Langlois, Neil E I

2017-03-01

Bruising is frequently documented in cases of violence for use as forensic evidence. However, bruises can be overlooked if they are not visible to the naked eye. Alternate light sources such as ultraviolet, narrow band, and infrared have been used in an attempt to reveal the presence of bruising that is not otherwise apparent. However, there is a significant gap in knowledge surrounding this technique as it has not been validated against histology to confirm that bruising is genuinely being enhanced. A recent study evaluated the ability of alternate light sources to enhance visibility of bruises using a pigskin model. However, histological confirmation of bruising in humans using these light sources has not yet been performed. In this study, embalmed and non-embalmed human cadavers were used. Bodies were surveyed with alternate light sources, and enhanced regions that were unapparent under white light were photographed with the alternate light sources and sampled for histological assessment. Immunohistochemical staining for the red blood cell surface protein glycophorin was used determine if the enhanced area was a bruise (defined by the presence of extravasated erythrocytes). Photographs of areas confirmed to be bruises were analyzed using the program Fiji to measure enhancement, which was defined as an increase in the measured transverse diameter. In the non-embalmed and the embalmed cadavers violet alternate light produced the greatest enhancement of histologically confirmed bruises, followed by blue (both p < 0.0001). Regions that were not confirmed as bruises also enhanced, indicating that light sources may not be specific. This suggests that the use of light sources to enhance the visibility of bruising should be undertaken with caution and further studies are required.

Improved aethalometer

DOEpatents

Hansen, A.D.

1988-01-25

An improved aethalometer having a single light source and a single light detector and two light paths from the light source to the light detector. A quartz fiber filter is inserted in the device, the filter having a collection area in one light path and a reference area in the other light path. A gas flow path through the aethalometer housing allows ambient air to flow through the collection area of the filter so that aerosol particles can be collected on the filter. A rotating disk with an opening therethrough allows light for the light source to pass alternately through the two light paths. The voltage output of the detector is applied to a VCO and the VCO pulses for light transmission separately through the two light paths, are counted and compared to determine the absorption coefficient of the collected aerosol particles. 5 figs.

Study of Selecting on Light Source Used for Micro-algae Cultivation in Space

NASA Astrophysics Data System (ADS)

Ai, Weidang; Ai, Weidang; Guo, Shuang-Sheng; Gao, Feng; Tang, Yong-Kang; Qin, Li-Feng

To select suitable light source for micro-algae cultivation in future space station, the selected Spirulina plastensis(No.7) were cultured under different lightening qualities, including six light sources that were made up of different combinations of red and blue light-emitting diode(LED). The growth, photosynthetic efficiency and nutrition quality of the Spirulina, were analyzed. From the experiments, the red light may promote the cumulation of biomass of the Spirulina, and the cumulating rate was the highest under all red light source, but the syntheses of protein, phycobiliprotein, β-carotene, VE and other nutrients needs a certain portion of blue light; yet, the complete blue light condition is not favorable to the growth of Spirulina, and may bring pollution by chlorella and other kinds of micro-algae. It is concluded that the LEDs can be used as the light resource of micro-algae cultivation. The normal growth and development of microalgae need two light sources of both red and blue LEDs. The comprehensive analyses of the various factors that affect the growth of Spirulina, such as nutrition quality and photosynthetic activities, etc., showed that the combination of 80% red and 20% blue LED is the optimum one among those tested combinations. Key word: light-emitting diode; micro-algae; controlled ecological life support system (CELSS); space cultivation

Method and apparatus for dispensing small quantities of mercury from evacuated and sealed glass capsules

DOEpatents

Grossman, Mark W.; George, William A.; Pai, Robert Y.

1985-01-01

A technique for opening an evacuated and sealed glass capsule containing a material that is to be dispensed which has a relatively high vapor pressure such as mercury. The capsule is typically disposed in a discharge tube envelope. The technique involves the use of a first light source imaged along the capsule and a second light source imaged across the capsule substantially transversely to the imaging of the first light source. Means are provided for constraining a segment of the capsule along its length with the constraining means being positioned to correspond with the imaging of the second light source. These light sources are preferably incandescent projection lamps. The constraining means is preferably a multiple looped wire support.

Updates on the African Synchrotron Light Source (AfLS) Project

NASA Astrophysics Data System (ADS)

Dobbins, Tabbetha; Mtingwa, Sekazi; Wague, Ahmadou; Connell, Simon; Masara, Brian; Ntsoane, Tshepo; Norris, Lawrence; Winick, Herman; Evans-Lutterodt, Kenneth; Hussein, Tarek; Maresha, Feene; McLaughlin, Krystle; Oladijo, Philip; Du Plessis, Esna; Murenzi, Romain; Reed, Kennedy; Sette, Francesco; Werin, Sverker; Dorfan, Jonathan; Yousef, Mohammad

Africa is the only habitable continent without a synchrotron light source. A full steering committee was elected at the African Light Source (AfLS) conference on November 16-20, 2015 at the European Synchrotron Radiation Facility (ESRF) in Grenoble, France. The conference brought together African scientists, policy makers, and stakeholders to discuss a synchrotron light source in Africa. Firm outcomes of the Conference were a set of resolutions and a roadmap. Additionally, a collaborative proposal to promote Advanced Light Sources and crystallographic sciences in targeted regions of the world was submitted by the International Union of Pure and Applied Physics (IUPAP) and the International Union of Crystallography (IUCr) to the International Council for Science (ICSU). www.africanlightsource.org.

VizieR Online Data Catalog: Light curves of WASP-52 (Mancini+, 2017)

NASA Astrophysics Data System (ADS)

Mancini, L.; Southworth, J.; Raia, G.; Tregloan-Reed, J.; Molliere, P.; Bozza, V.; Bretton, M.; Bruni, I.; Ciceri, S.; D'Ago, G.; Dominik, M.; Hinse, T. C.; Hundertmark, M.; Jorgensen, U. G.; Korhonen, H.; Rabus, M.; Rahvar, S.; Starkey, D.; Calchi Novati, S.; Figuera Jaimes, R.; Henning, T.; Juncher, D.; Haugbolle, T.; Kains, N.; Popovas, A.; Schmidt, R. W.; Skottfelt, J.; Snodgrass, C.; Surdej, J.; Wertz, O.

2018-03-01

Light curves of transit events of the extrasolar planet WASP-52b. One of the datasets was obtained using the Cassini 1.52m Telescope (Gunn r) at the Astronomical Observatory of Bologna in Loiano (Italy). Three of the datasets were obtained using the Zeiss 1.23m telescope (Cousins R and Cousins I) at the German-Spanish Astronomical Centre at Calar Alto (Spain). Four of the datasets were obtained using the MPG 2.2m telescope (Sloan g, Sloan r, Sloan i, Sloan z) at the ESO Observatory in La Silla (Chile). Four of the datasets were obtained using the 1.54m Danish Telescope at the ESO Observatory in La Silla (Chile). (2 data files).

The choice of biomarkers determines the selenium status in young German vegans and vegetarians.

PubMed

Hoeflich, Johanna; Hollenbach, Birgit; Behrends, Thomas; Hoeg, Antonia; Stosnach, Hagen; Schomburg, Lutz

2010-12-01

Daily nutrition varies considerably among individuals. The number of vegetarians is increasing continuously due to ethical, environmental, religious or other reasons. There is growing concern over their nutritional status with respect to micronutrient deficiencies. Among the essential trace elements, Se is of prime importance as it is part of the active site in selenoproteins. European soil and plants are relatively poor sources of Se, while farm animals are generally supplemented with Se in order to improve their health and avoid deficiency syndromes. We therefore wondered whether German vegetarians display a measurable Se deficiency. To this end, we compared young vegetarians (n 54) and omnivores (n 53). We assessed their Se status by measuring extracellular glutathione peroxidase 3 (GPX3) activity, and concentrations of total serum Se and circulating Se-transport protein selenoprotein P (SEPP). GPX3 activities were not different between the groups, whereas both total Se and SEPP concentrations were reduced to 79.5 and 71.2 % in vegetarians compared with omnivores. When splitting the group of vegetarians into vegans (n 26) and vegetarians consuming egg and milk products (n 28), analyses of the Se-dependent biomarkers did not reveal significant differences. We conclude that low serum Se is mirrored by circulating SEPP concentrations, but not by GPX3 activities in marginally supplied individuals. The specific dietary Se sources, divergent metabolic routes of selenomethionine v. selenocysteine and the different saturation kinetics of GPX3 and SEPP probably underlie our contradictory findings. Whether German vegetarians and vegans need to be considered as a Se-deficient group depends on the biomarker chosen.

Discrete wavelength-locked external cavity laser

NASA Technical Reports Server (NTRS)

Pilgrim, Jeffrey S. (Inventor); Silver, Joel A. (Inventor)

2005-01-01

An external cavity laser (and method of generating laser light) comprising: a laser light source; means for collimating light output by the laser light source; a diffraction grating receiving collimated light; a cavity feedback mirror reflecting light received from the diffraction grating back to the diffraction grating; and means for reliably tuning the external cavity laser to discrete wavelengths.

[External and internal financing in health care].

PubMed

Henke, Klaus-Dirk

2007-05-15

The objective of this contribution is to characterize the functional and institutional features of the German health-care system. This takes place after a short introduction and examination of the ongoing debate on health care in Germany. External funding describes the form of revenue generation. Regarding external funding of the German health care system, one of the favored alternatives in the current debate is the possibility of introducing per capita payments. After a short introduction to the capitation option, focus is on the so-called health fund that is currently debated on and being made ready for implementation in Germany, actually a mixed system of capitation and contributions based on income. On the other hand, internal funding is the method of how different health-care services are purchased or reimbursed. This becomes a rather hot topic in light of new trends for integrated and networked care to patients and different types of budgeting. Another dominating question in the German health-care system is the liberalization of the contractual law, with its "joint and uniform" regulations that have to be loosened for competition gains. After a discussion of the consequences of diagnosis-related groups (DRGs) in Germany, the article is concluded by a note on the political rationality of the current health-care reform for increased competition within the Statutory Health Insurance and its players as exemplified by the health fund. To sum up, it has to be said that the complexity and specific features of how the German system is financed seem to require ongoing reform considerations even after realization of the currently debated health-care reform law which, unfortunately, is dominated by political rationalities rather than objective thoughts.

[Medical Emergency Preparedness in offshore wind farms : New challenges in the german north and baltic seas].

PubMed

Stuhr, M; Dethleff, D; Weinrich, N; Nielsen, M; Hory, D; Kowald, B; Seide, K; Kerner, T; Nau, C; Jürgens, C

2016-05-01

Offshore windfarms are constructed in the German North and Baltic Seas. The off-coast remoteness of the windfarms, particular environmental conditions, limitations in offshore structure access, working in heights and depths, and the vast extent of the offshore windfarms cause significant challenges for offshore rescue. Emergency response systems comparable to onshore procedures are not fully established yet. Further, rescue from offshore windfarms is not part of the duty of the German Maritime Search and Rescue Organization or SAR-Services due to statute and mandate reasons. Scientific recommendations or guidelines for rescue from offshore windfarms are not available yet. The present article reflects the current state of medical care and rescue from German offshore windfarms and related questions. The extended therapy-free interval until arrival of the rescue helicopter requires advanced first-aid measures as well as improved first-aider qualification. Rescue helicopters need to be equipped with a winch system in order to dispose rescue personnel on the wind turbines, and to hoist-up patients. For redundancy reasons and for conducting rendezvous procedures, adequate sea-bound rescue units need to be provided. In the light of experiences from the offshore oil and gas industry and first offshore wind analyses, the availability of professional medical personnel in offshore windfarms seems advisible. Operational air medical rescue services and specific offshore emergency reaction teams have established a powerful rescue chain. Besides the present development of medical standards, more studies are necessary in order to place the rescue chain on a long-term, evidence-based groundwork. A central medical offshore registry may help to make a significant contribution at this point.

Recovery assessment scale: Examining the factor structure of the German version (RAS-G) in people with schizophrenia spectrum disorders.

PubMed

Cavelti, M; Wirtz, M; Corrigan, P; Vauth, R

2017-03-01

The recovery framework has found its way into local and national mental health services and policies around the world, especially in English speaking countries. To promote this process, it is necessary to assess personal recovery validly and reliably. The Recovery Assessment Scale (RAS) is the most established measure in recovery research. The aim of the current study is to examine the factor structure of the German version of the RAS (RAS-G). One hundred and fifty-six German-speaking clients with schizophrenia or schizoaffective disorder from a community mental health service completed the RAS-G plus measures of recovery attitudes, self-stigma, psychotic symptoms, depression, and functioning. A confirmatory factor analysis of the original 24-item RAS version was conducted to examine its factor structure, followed by reliability and validity testing of the extracted factors. The CFA yielded five factors capturing 14 items which showed a substantial overlap with the original subscales Personal Confidence and Hope, Goal and Success Orientation, Willingness to Ask for Help, Reliance on Others, and No Domination by Symptoms. The factors demonstrated mean to excellent reliability (0.59-0.89) and satisfactory criterial validity by positive correlations with measures of recovery attitudes and functioning, and negative correlations with measures of self-stigma, and psychotic and depressive symptoms. The study results are discussed in the light of other studies examining the factor structure of the RAS. Overall, they support the use of the RAS-G as a means to promote recovery oriented services, policies, and research in German-speaking countries. Copyright © 2016 Elsevier Masson SAS. All rights reserved.

Investigation of the photo stationary state of NOx during the PARADE field experiment using a novel Gas Analyzer for Nitrogen Dioxide Applying Laser-induced Fluorescence

NASA Astrophysics Data System (ADS)

Javed, Umar; Kubistin, Dagmar; Martinez, Monica; Rudolf, Markus; Reiffs, Andreas; Parchatka, Uwe; Nölscher, Anke; Song, Wie; Thieser, Jim; Bohn, Birger; Pöhler, Denis; Berkes, Florian; Sander, Rolf; Crowley, John; Williams, Jonathan; Hoor, Peter; Fischer, Horst; Lelieveld, Jos; Harder, Hartwig

2013-04-01

Here we present an investigation of the photostationary state (PSS) between NO and NO2 using measurements of NO2 performed during PARADE with a new Gas Analyzer for Nitrogen Dioxide Applying Laser-induced Fluorescence (GANDALF). The focus of PARADE, a collaboration between different German research institutes, is to investigate the summertime emissions and photochemistry in a semi-remote environment. Field measurements took place in summer 2011 at the Taunus Observatory, located on the Kleiner Feldberg in southwestern Germany. The measurement site is surrounded by forest with biogenic emissions in summer and influenced by anthropogenic sources from nearby large cities and highways. A comprehensive set of measurements of several important trace species and meteorological parameters were carried out during PARADE, including three different in-situ measurement techniques for NO2, namely LIF, TD-CRD and a blue light converter/CLD. Being the first deployment of GANDALF this opportunity provided the means for a detailed comparison. Further we present the characteristics of the PSS observed in different chemical regimes observed for different wind directions during the campaign and compare the results with chemical box model simulations constrained by measurements.

Progress toward a practical laser driven ion source using variable thickness liquid crystal targets

NASA Astrophysics Data System (ADS)

Poole, Patrick; Cochran, Ginevra; Zeil, Karl; Metzkes, Josephine; Obst, Lieselotte; Kluge, Thomas; Schlenvoigt, Hans-Peter; Prencipe, Irene; Cowan, Tom; Schramm, Uli; Schumacher, Douglass

2016-10-01

Ion acceleration from ultra-intense laser interaction has been long investigated in pursuit of requisite energies and spectral distributions for applications like proton cancer therapy. However, the details of ion acceleration mechanisms and their laser intensity scaling are not fully understood, especially the complete role of pulse contrast and target thickness. Additionally, target delivery and alignment at appropriate rates for study and subsequent treatment pose significant challenges. We present results from a campaign on the Draco laser using liquid crystal targets that have on-demand, in-situ thickness tunability over more than three orders of magnitude, enabling rapid data collection due to <1 minute, automatically aligned target formation. Diagnostics include spectral and spatial measurement of ions, electrons, and reflected and transmitted light, all with thickness, laser focus, and pulse contrast variations. In particular we discuss optimal thickness vs. contrast and details of ultra-thin target normal ion acceleration, along with supporting particle-in-cell studies. This work was supported by the DARPA PULSE program through AMRDEC, by the NNSA (DE-NA0001976), by EC Horizon 2020 LASERLAB-EUROPE/LEPP (654148), and by the German Federal Ministry of Education and Research (BMBF, 03Z1O511).

Gauß and beyond: the making of Easter algorithms

NASA Astrophysics Data System (ADS)

Bien, Reinhold

2004-07-01

It is amazing to see how many webpages are devoted to the art of finding the date of Easter Sunday. Just for illustration, the reader may search for terms such as Gregorian calendar, date of Easter, or Easter algorithm. Sophisticated essays as well as less enlightening contributions are presented, and many a doubt is expressed about the reliability of some results obtained with some Easter algorithms. In short, there is still a great interest in those problems. Gregorian Easter algorithms exist for two centuries (or more?), but most of their history is rather obscure. Some reasons may be that some important sources are written in Latin or in the German of Goethe's time, or they are difficult to discover. Without being complete, the following paper is intended to shed light on how those techniques emerged and evolved. Like a microcosm, the history of Easter algorithms resembles the history of any science: it is a story of trials, errors, and successes, and, last but not least, a story of offended pride. A number of articles, published before 1910, are cited in: A. Fraenkel, Die Berechnung des Osterfestes. Journal für die reine und angewandte Mathematik, Volume 138 (1910), 133-146.

Plant Growth Absorption Spectrum Mimicking Light Sources

PubMed Central

Jou, Jwo-Huei; Lin, Ching-Chiao; Li, Tsung-Han; Li, Chieh-Ju; Peng, Shiang-Hau; Yang, Fu-Chin; Justin Thomas, K. R.; Kumar, Dhirendra; Chi, Yun; Hsu, Ban-Dar

2015-01-01

Plant factories have attracted increasing attention because they can produce fresh fruits and vegetables free from pesticides in all weather. However, the emission spectra from current light sources significantly mismatch the spectra absorbed by plants. We demonstrate a concept of using multiple broad-band as well as narrow-band solid-state lighting technologies to design plant-growth light sources. Take an organic light-emitting diode (OLED), for example; the resulting light source shows an 84% resemblance with the photosynthetic action spectrum as a twin-peak blue dye and a diffused mono-peak red dye are employed. This OLED can also show a greater than 90% resemblance as an additional deeper red emitter is added. For a typical LED, the resemblance can be improved to 91% if two additional blue and red LEDs are incorporated. The approach may facilitate either an ideal use of the energy applied for plant growth and/or the design of better light sources for growing different plants. PMID:28793503

Computation and visualization of the MacAdam limits for any lightness, hue angle, and light source

NASA Astrophysics Data System (ADS)

Martínez-Verdú, Francisco; Perales, Esther; Chorro, Elisabet; de Fez, Dolores; Viqueira, Valentín; Gilabert, Eduardo

2007-06-01

We present a systematic algorithm capable of searching for optimal colors for any lightness L* (between 0 and 100), any illuminant (D65, F2, F7, F11, etc.), and any light source reported by CIE. Color solids are graphed in some color spaces (CIELAB, SVF, DIN99d, and CIECAM02) by horizontal (constant lightness) and transversal (constant hue angle) sections. Color solids plotted in DIN99d and CIECAM02 color spaces look more spherical or homogeneous than the ones plotted in CIELAB and SVF color spaces. Depending on the spectrum of the light source or illuminant, the shape of its color solid and its content (variety of distinguishable colors, with or without color correspondence) change drastically, particularly with sources whose spectrum is discontinuous and/or very peaked, with correlated color temperature lower than 5500 K. This could be used to propose an absolute colorimetric quality index for light sources comparing the volumes of their gamuts, in a uniform color space.

Method and Apparatus for Characterizing Pressure Sensors using Modulated Light Beam Pressure

NASA Technical Reports Server (NTRS)

Youngquist, Robert C. (Inventor)

2003-01-01

Embodiments of apparatuses and methods are provided that use light sources instead of sound sources for characterizing and calibrating sensors for measuring small pressures to mitigate many of the problems with using sound sources. In one embodiment an apparatus has a light source for directing a beam of light on a sensing surface of a pressure sensor for exerting a force on the sensing surface. The pressure sensor generates an electrical signal indicative of the force exerted on the sensing surface. A modulator modulates the beam of light. A signal processor is electrically coupled to the pressure sensor for receiving the electrical signal.

Spatially resolved imaging of opto-electrical property variations

DOEpatents

Nikiforov, Maxim; Darling, Seth B; Suzer, Ozgun; Guest, Jeffrey; Roelofs, Andreas

2014-09-16

Systems and methods for opto electric properties are provided. A light source illuminates a sample. A reference detector senses light from the light source. A sample detector receives light from the sample. A positioning fixture allows for relative positioning of the sample or the light source with respect to each other. An electrical signal device measures the electrical properties of the sample. The reference detector, sample detector and electrical signal device provide information that may be processed to determine opto-electric properties of the same.

Using Medtronic's MAST Quadrant, Radiance, and Radiance X Illumination Systems with high-power light sources increases burn risk.

PubMed

2010-11-01

Connecting the Medtronic MAST Quadrant Illumination System, Radiance Illumination System, or Radiance X Illumination System--all of which are specialized fiberoptic light cables used with the company's minimally invasive spinal products--to a high-power surgical light source significantly increases the risk of patient burns. Hospitals should ensure that the products are used only with 100 W light sources and 5 mm light cables, as prescribed in the product labeling.

LEDs as light source: examining quality of acquired images

NASA Astrophysics Data System (ADS)

Bachnak, Rafic; Funtanilla, Jeng; Hernandez, Jose

2004-05-01

Recent advances in technology have made light emitting diodes (LEDs) viable in a number of applications, including vehicle stoplights, traffic lights, machine-vision-inspection, illumination, and street signs. This paper presents the results of comparing images taken by a videoscope using two different light sources. One of the sources is the internal metal halide lamp and the other is a LED placed at the tip of the insertion tube. Images acquired using these two light sources were quantitatively compared using their histogram, intensity profile along a line segment, and edge detection. Also, images were qualitatively compared using image registration and transformation. The gray-level histogram, edge detection, image profile and image registration do not offer conclusive results. The LED light source, however, produces good images for visual inspection by an operator. The paper will present the results and discuss the usefulness and shortcomings of various comparison methods.

Solid state lighting devices and methods with rotary cooling structures

DOE Office of Scientific and Technical Information (OSTI.GOV)

Koplow, Jeffrey P.

Solid state lighting devices and methods for heat dissipation with rotary cooling structures are described. An example solid state lighting device includes a solid state light source, a rotating heat transfer structure in thermal contact with the solid state light source, and a mounting assembly having a stationary portion. The mounting assembly may be rotatably coupled to the heat transfer structure such that at least a portion of the mounting assembly remains stationary while the heat transfer structure is rotating. Examples of methods for dissipating heat from electrical devices, such as solid state lighting sources are also described. Heat dissipationmore » methods may include providing electrical power to a solid state light source mounted to and in thermal contact with a heat transfer structure, and rotating the heat transfer structure through a surrounding medium.« less

AutoLens: Automated Modeling of a Strong Lens's Light, Mass and Source

NASA Astrophysics Data System (ADS)

Nightingale, J. W.; Dye, S.; Massey, Richard J.

2018-05-01

This work presents AutoLens, the first entirely automated modeling suite for the analysis of galaxy-scale strong gravitational lenses. AutoLens simultaneously models the lens galaxy's light and mass whilst reconstructing the extended source galaxy on an adaptive pixel-grid. The method's approach to source-plane discretization is amorphous, adapting its clustering and regularization to the intrinsic properties of the lensed source. The lens's light is fitted using a superposition of Sersic functions, allowing AutoLens to cleanly deblend its light from the source. Single component mass models representing the lens's total mass density profile are demonstrated, which in conjunction with light modeling can detect central images using a centrally cored profile. Decomposed mass modeling is also shown, which can fully decouple a lens's light and dark matter and determine whether the two component are geometrically aligned. The complexity of the light and mass models are automatically chosen via Bayesian model comparison. These steps form AutoLens's automated analysis pipeline, such that all results in this work are generated without any user-intervention. This is rigorously tested on a large suite of simulated images, assessing its performance on a broad range of lens profiles, source morphologies and lensing geometries. The method's performance is excellent, with accurate light, mass and source profiles inferred for data sets representative of both existing Hubble imaging and future Euclid wide-field observations.

Optical detector calibrator system

NASA Technical Reports Server (NTRS)

Strobel, James P. (Inventor); Moerk, John S. (Inventor); Youngquist, Robert C. (Inventor)

1996-01-01

An optical detector calibrator system simulates a source of optical radiation to which a detector to be calibrated is responsive. A light source selected to emit radiation in a range of wavelengths corresponding to the spectral signature of the source is disposed within a housing containing a microprocessor for controlling the light source and other system elements. An adjustable iris and a multiple aperture filter wheel are provided for controlling the intensity of radiation emitted from the housing by the light source to adjust the simulated distance between the light source and the detector to be calibrated. The geared iris has an aperture whose size is adjustable by means of a first stepper motor controlled by the microprocessor. The multiple aperture filter wheel contains neutral density filters of different attenuation levels which are selectively positioned in the path of the emitted radiation by a second stepper motor that is also controlled by the microprocessor. An operator can select a number of detector tests including range, maximum and minimum sensitivity, and basic functionality. During the range test, the geared iris and filter wheel are repeatedly adjusted by the microprocessor as necessary to simulate an incrementally increasing simulated source distance. A light source calibration subsystem is incorporated in the system which insures that the intensity of the light source is maintained at a constant level over time.

2-.mu.m fiber amplified spontaneous emission (ASE) source

NASA Technical Reports Server (NTRS)

Jiang, Shibin (Inventor); Wu, Jianfeng (Inventor); Geng, Jihong (Inventor)

2007-01-01

A 2-.mu.m fiber Amplified Spontaneous Emission (ASE) source provides a wide emission bandwidth and improved spectral stability/purity for a given output power. The fiber ASE source is formed from a heavy metal oxide multicomponent glass selected from germanate, tellurite and bismuth oxides and doped with high concentrations, 0.5-15 wt. %, thulium oxides (Tm.sub.2O.sub.3) or 0.1-5 wt% holmium oxides (Ho.sub.2O.sub.3) or mixtures thereof. The high concentration of thulium dopants provide highly efficient pump absorption and high quantum efficiency. Co-doping of Tm and Ho can broaden the ASE spectrum.

Compact high-power red-green-blue laser light source generation from a single lithium tantalate with cascaded domain modulation.

PubMed

Xu, P; Zhao, L N; Lv, X J; Lu, J; Yuan, Y; Zhao, G; Zhu, S N

2009-06-08

1W quasi-white-light source has been generated from a single lithium tantalate with cascaded domain modulation. The quasi-white-light is combined by proper proportion of the red, green and blue laser light. The red and the blue result from a compact self-sum frequency optical parametric oscillation when pumped by a single green laser. The efficiency of quasi-white-light from the green pump reaches 27%. This compact design can be employed not only as a stable and powerful RGB light source but also an effective blue laser generator.

Ghost imaging with bucket detection and point detection

NASA Astrophysics Data System (ADS)

Zhang, De-Jian; Yin, Rao; Wang, Tong-Biao; Liao, Qing-Hua; Li, Hong-Guo; Liao, Qinghong; Liu, Jiang-Tao

2018-04-01

We experimentally investigate ghost imaging with bucket detection and point detection in which three types of illuminating sources are applied: (a) pseudo-thermal light source; (b) amplitude modulated true thermal light source; (c) amplitude modulated laser source. Experimental results show that the quality of ghost images reconstructed with true thermal light or laser beam is insensitive to the usage of bucket or point detector, however, the quality of ghost images reconstructed with pseudo-thermal light in bucket detector case is better than that in point detector case. Our theoretical analysis shows that the reason for this is due to the first order transverse coherence of the illuminating source.

Potential Sources of Polarized Light from a Plant Canopy

NASA Technical Reports Server (NTRS)

Vanderbilt, Vern; Daughtry, Craig; Dahlgren, Robert

2016-01-01

Field measurements have demonstrated that sunlight polarized during a first surface reflection by shiny leaves dominates the optical polarization of the light reflected by shiny-leafed plant canopies having approximately spherical leaf angle probability density functions ("Leaf Angle Distributions" - LAD). Yet for other canopies - specifically those without shiny leaves and/or spherical LADs - potential sources of optically polarized light may not always be obvious. Here we identify possible sources of polarized light within those other canopies and speculate on the ecologically important information polarization measurements of those sources might contain.

Method and apparatus for dispensing small quantities of mercury from evacuated and sealed glass capsules

DOEpatents

Grossman, M.W.; George, W.A.; Pai, R.Y.

1985-08-13

A technique is disclosed for opening an evacuated and sealed glass capsule containing a material that is to be dispensed which has a relatively high vapor pressure such as mercury. The capsule is typically disposed in a discharge tube envelope. The technique involves the use of a first light source imaged along the capsule and a second light source imaged across the capsule substantially transversely to the imaging of the first light source. Means are provided for constraining a segment of the capsule along its length with the constraining means being positioned to correspond with the imaging of the second light source. These light sources are preferably incandescent projection lamps. The constraining means is preferably a multiple looped wire support. 6 figs.

Synchrotron Light Sources in Developing Countries

NASA Astrophysics Data System (ADS)

Winick, Herman; Pianetta, Piero

2017-01-01

The more than 50 light sources now in operation around the world include facilities in Brazil, Korea, and Taiwan which started their programs in the 1980's when they were developing countries. They came on line in the 1990's and have since trained hundreds of graduate students locally, without sending them abroad and losing many of them. They have also attracted dozens of mid-career diaspora scientists to return. Their growing user communities have demanded more advanced facilities, leading to the funding of higher performance new light sources that are now coming into operation. Light sources in the developing world now include the following: SESAME in the Middle East which is scheduled to start research in 2017 (www.sesame.org); The African Light Source, in the planning stage (www.africanlightsource.org); and The Mexican Light Source, in the planning stage (http://www.aps.org/units/fip/newsletters/201509/mexico.cfm). See: http://wpj.sagepub.com/content/32/4/92.full.pdf +html; http://www.lightsources.org/press-release/2015/11/20/grenoble-resolutions-mark-historical-step-towards-african-light-source. SLAC National Accelerator Laboratory, is supported by the U.S. Department of Energy, Office of Science, Office of Basic Energy Sciences under Contract No. DE-AC02-76SF00515.

Schlieren with a laser diode source

NASA Technical Reports Server (NTRS)

Burner, A. W.; Franke, J. M.

1981-01-01

The use of a laser diode as a light source for a schlieren system designed to study phase objects such as a wind-tunnel flow is explored. A laser diode schlieren photograph and a white light schlieren photograph (zirconium arc source) are presented for comparison. The laser diode has increased sensitivity, compared with light schlieren, without appreciable image degradiation, and is an acceptable source for schlieren flow visualization.

TRUE COLORS: LEDS AND THE RELATIONSHIP BETWEEN CCT, CRI, OPTICAL SAFETY, MATERIAL DEGRADATION, AND PHOTOBIOLOGICAL STIMULATION

DOE Office of Scientific and Technical Information (OSTI.GOV)

Royer, Michael P.

2014-08-30

This document analyzes the optical, material, and photobiological hazards of LED light sources compared to conventional light sources. It documents that LEDs generally produce the same amount of blue light, which is the primary contributor to the risks, as other sources at the same CCT. Duv may have some effect on the amount of blue light, but CRI does not.

Impact of red versus blue light on tolerability and efficacy of PDT: a randomized controlled trial.

PubMed

Gholam, Patrick; Bosselmann, Ina; Enk, Alexander; Fink, Christine

2018-06-01

Various light sources may be used for photodynamic therapy of actinic keratosis since photosensitizing agents are activated by different wavelengths. However, the relative impact of red and blue light irradiation on the efficacy and tolerability of therapy is controversial. The aim of this study is to compare the efficacy and tolerability of therapy with red versus blue light sources, as well as the patients' evaluation of cosmetic results, clinical response, painfulness and preferred light source for future photodynamic treatments. This is a prospective, single-center, randomized, controlled, open-label study with 28 patients undergoing elective photodynamic therapy. Red and blue light sources both showed very good results with a complete response rate of 84 % and 85 % respectively. Pain during photodynamic therapy was 6.1 vs. 5.4 (and 2.1 vs. 1.5 eight hours after therapy) on the visual analogue scale. Although these differences were statistically significant, the clinical relevance is low, since the number of therapy interruptions were equally distributed in both groups, and patients' subjective evaluation of the treatment showed no personal preference towards the light sources. Both light sources showed very good clinical results and satisfactory tolerability in this study. © 2018 Deutsche Dermatologische Gesellschaft (DDG). Published by John Wiley & Sons Ltd.

Superluminescent light emitting diodes: the best out of two worlds

NASA Astrophysics Data System (ADS)

Rossetti, M.; Napierala, J.; Matuschek, N.; Achatz, U.; Duelk, M.; Vélez, C.; Castiglia, A.; Grandjean, N.; Dorsaz, J.; Feltin, E.

2012-03-01

Since pico-projectors were starting to become the next electronic "must-have" gadget, the experts were discussing which light-source technology seems to be the best for the existing three major projection approaches for the optical scanning module such as digital light processing, liquid crystal on silica and laser beam steering. Both so-far used light source technologies have distinct advantages and disadvantages. Though laser-based pico-projectors are focus-free and deliver a wider color gamut, their major disadvantages are speckle noise, cost and safety issues. In contrast, projectors based on cheaper Light Emitting Diodes (LEDs) as light source are criticized for a lack of brightness and for having limited focus. Superluminescent Light Emitting Diodes (SLEDs) are temporally incoherent and spatially coherent light sources merging in one technology the advantages of both Laser Diodes (LDs) and LEDs. With almost no visible speckle noise, focus-free operation and potentially the same color gamut than LDs, SLEDs could potentially answer the question which light source to use in future projector applications. In this quest for the best light source, we realized visible SLEDs emitting both in the red and blue spectral region. While the technology required for the realization of red emitters is already well established, III-nitride compounds required for blue emission have experienced a major development only in relatively recent times and the technology is still under development. The present paper is a review of the status of development reached for the blue superluminescent diodes based on the GaN material system.

New insights into the biography of Gottfried Kirch. (German Title: Neue Erkenntnisse zur Biographie von Gottfried Kirch)

NASA Astrophysics Data System (ADS)

Herbst, Klaus-Dieter

New biographical results of Gottfried Kirch, the most outstanding astronomer around 1700 in German lands, are outlined on the basis of newly found sources and the first-time inclusion of additional letters from his correspondence, which comprises 600 letters. Special attention is drwawn to his stay in Langgrün and Lobenstein in the Vogtland, in Leipzig, Coburg, Guben and Berlin. In addition, new details about his family are revealed, especially about the older children Gottlieb, Heilmann and Theodora, the offspring from his first marriage. A third section deals with the possibilities which are to be expected from a systematic evaluation of Kirch's correspondence. Only about 100 out of 600 letters have been used for historical publications until now.

Integrated LED-based luminaire for general lighting

DOEpatents

Dowling, Kevin J.; Lys, Ihor A.; Williamson, Ryan C.; Roberge, Brian; Roberts, Ron; Morgan, Frederick; Datta, Michael Jay; Mollnow, Tomas Jonathan

2016-08-30

Lighting apparatus and methods employing LED light sources are described. The LED light sources are integrated with other components in the form of a luminaire or other general purpose lighting structure. Some of the lighting structures are formed as Parabolic Aluminum Reflector (PAR) luminaires, allowing them to be inserted into conventional sockets. The lighting structures display beneficial operating characteristics, such as efficient operation, high thermal dissipation, high output, and good color mixing.

Integrated LED-based luminare for general lighting

DOEpatents

Dowling, Kevin J.; Lys, Ihor A.; Roberge, Brian; Williamson, Ryan C.; Roberts, Ron; Datta, Michael; Mollnow, Tomas; Morgan, Frederick M.

2013-03-05

Lighting apparatus and methods employing LED light sources are described. The LED light sources are integrated with other components in the form of a luminaire or other general purpose lighting structure. Some of the lighting structures are formed as Parabolic Aluminum Reflector (PAR) luminaires, allowing them to be inserted into conventional sockets. The lighting structures display beneficial operating characteristics, such as efficient operation, high thermal dissipation, high output, and good color mixing.

Northern Red Oak Seedling Growth Varies by Light Intensity and Seed Source

Treesearch

Charles E. McGee

1968-01-01

Northern red oak seedlings from each of three seed sources were subjected for one growing season to one of four intensities of light: full light, 70 percent light, 37 percent light, and 8 percent light. Seedlings grown in the open were taller than those grown in the shade and had more, generally heavier leaves. Height and leaf growth decreased as the amount of light...

Wotan’s Workshop: Military Experiments before World War II

DTIC Science & Technology

2013-06-27

photo: A column of mock tanks—with wood and canvas armor shapes mounted on light vehicles—participated in German military maneuvers in 1928. (Imperial...37mm antitank gun. The gunners called it a “ wood -o- meter” and claimed it could fire 400 splinters and 15 drops of turpentine per minute. Charles Gorry...ticipation in maneuvers. These surrogates, made of wood and canvas and mounted on cars or even on bicycles, were used in force-on-force maneuvers that

Light Armor in Deep Operational Maneuver: The New Excalibur?

DTIC Science & Technology

1994-05-04

organizations. 29 777-P7 777777-7 Operatlon Barration . The Belorussilan Camoaign During The Russo - German War. 194& Operation Bagration took place...McLean, VA: Brassey’s Defence Publisher’s, 1984), p. 141., 35. James 3. Schneider, "V.K. Triandafillov, Military Theorist." The Journal of SoQviet...Doctrine," The_= RIjournaL (March 1976): 38-46. Barbara,~ James C. and Brown, R.F. "Deep Thrust on the Extended Battlefield," Military Review (October 1982

The Endockscope Using Next Generation Smartphones: "A Global Opportunity".

PubMed

Tse, Christina; Patel, Roshan M; Yoon, Renai; Okhunov, Zhamshid; Landman, Jaime; Clayman, Ralph V

2018-06-02

The Endockscope combines a smartphone, a battery powered flashlight and a fiberoptic cystoscope allowing for mobile videocystoscopy. We compared conventional videocystoscopy to the Endockscope paired with next generation smartphones in an ex-vivo porcine bladder model to evaluate its image quality. The Endockscope consists of a three-dimensional (3D) printed attachment that connects a smartphone to a flexible fiberoptic cystoscope plus a 1000 lumen light-emitting diode (LED) cordless light source. Video recordings of porcine cystoscopy with a fiberoptic flexible cystoscope (Storz) were captured for each mobile device (iPhone 6, iPhone 6S, iPhone 7, Samsung S8, and Google Pixel) and for the high-definition H3-Z versatile camera (HD) set-up with both the LED light source and the xenon light (XL) source. Eleven faculty urologists, blinded to the modality used, evaluated each video for image quality/resolution, brightness, color quality, sharpness, overall quality, and acceptability for diagnostic use. When comparing the Endockscope coupled to an Galaxy S8, iPhone 7, and iPhone 6S with the LED portable light source to the HD camera with XL, there were no statistically significant differences in any metric. 82% and 55% of evaluators considered the iPhone 7 + LED light source and iPhone 6S + LED light, respectively, appropriate for diagnostic purposes as compared to 100% who considered the HD camera with XL appropriate. The iPhone 6 and Google Pixel coupled with the LED source were both inferior to the HD camera with XL in all metrics. The Endockscope system with a LED light source when coupled with either an iPhone 7 or Samsung S8 (total cost: $750) is comparable to conventional videocystoscopy with a standard camera and XL light source (total cost: $45,000).

Morphosyntax in the Bilingual Mental Lexicon: An Experimental Study of Strong Stems in German

ERIC Educational Resources Information Center

Krause, Helena; Bosch, Sina; Clahsen, Harald

2015-01-01

Although morphosyntax has been identified as a major source of difficulty for adult (nonnative) language learners, most previous studies have examined a limited set of largely affix-based phenomena. Little is known about word-based morphosyntax in late bilinguals and of how morphosyntax is represented and processed in a nonnative speaker's…

Explaining Authors' Contribution to Pivotal Artifacts during Mass Collaboration in the Wikipedia's Knowledge Base

ERIC Educational Resources Information Center

Halatchliyski, Iassen; Moskaliuk, Johannes; Kimmerle, Joachim; Cress, Ulrike

2014-01-01

This article discusses the relevance of large-scale mass collaboration for computer-supported collaborative learning (CSCL) research, adhering to a theoretical perspective that views collective knowledge both as substance and as participatory activity. In an empirical study using the German Wikipedia as a data source, we explored collective…

Improved Representation of the Self-Perception Profile for Children through Bifactor Exploratory Structural Equation Modeling

ERIC Educational Resources Information Center

Arens, A. Katrin; Morin, Alexandre J. S.

2017-01-01

This study illustrates an integrative psychometric framework to investigate two sources of construct-relevant multidimensionality in answers to the Self-Perception Profile for Children (SPPC). Using a sample of 2,353 German students attending Grades 3 to 6, we contrasted: (a) first-order versus hierarchical and bifactor models to investigate…

"The Source of Learning Is Thought" Reading the "Chin-ssu lu" (???) with a "Western Eye"

ERIC Educational Resources Information Center

Reichenbach, Roland

2016-01-01

The contribution focuses on Neo-Confucian texts as collected by Zhu Xi (?? 1130-1200) and Lü Zuqian (1137-1181) and is a look from the "outside", from the perspective of German theories of Bildung ("self-cultivation"). It aims at demonstrating that among other insights that today's readers may gather from Neo-Confucian…

Westward Bound? Dutch Education and Cultural Transfer in the Mid-Twentieth Century

ERIC Educational Resources Information Center

Bakker, Nelleke

2014-01-01

This article discusses the transition from philosophy to psychology as the main source of inspiration for education during the mid-twentieth century in the Netherlands, situated between Germany in the east and the English-speaking world in the west. Claims have been made that educational theory in the Netherlands was dominated by German philosophy…

Misconceptions and Biases in German Students' Perception of Multiple Energy Sources: Implications for Science Education

ERIC Educational Resources Information Center

Lee, Roh Pin

2016-01-01

Misconceptions and biases in energy perception could influence people's support for developments integral to the success of restructuring a nation's energy system. Science education, in equipping young adults with the cognitive skills and knowledge necessary to navigate in the confusing energy environment, could play a key role in paving the way…

Solution-chemical route to generalized synthesis of metal germanate nanowires with room-temperature, light-driven hydrogenation activity of CO2 into renewable hydrocarbon fuels.

PubMed

Liu, Qi; Zhou, Yong; Tu, Wenguang; Yan, Shicheng; Zou, Zhigang

2014-01-06

A facile solution-chemical route was developed for the generalized preparation of a family of highly uniform metal germanate nanowires on a large scale. This route is based on the use of hydrazine monohydrate/H2O as a mixed solvent under solvothermal conditions. Hydrazine has multiple effects on the generation of the nanowires: as an alkali solvent, a coordination agent, and crystal anisotropic growth director. Different-percentage cobalt-doped Cd2Ge2O6 nanowires were also successfully obtained through the addition of Co(OAc)2·4H2O to the initial reaction mixture for future investigation of the magnetic properties of these nanowires. The considerably negative conduction band level of the Cd2Ge2O6 nanowire offers a high driving force for photogenerated electron transfer to CO2 under UV-vis illumination, which facilitates CO2 photocatalytic reduction to a renewable hydrocarbon fuel in the presence of water vapor at room temperature.

Bioethics and anti-bioethics in light of Nazi medicine: what must we remember?

PubMed

Wikler, D; Barondess, J

1993-03-01

Only recently have historians explored in depth the role of the medical profession in Nazi Germany. Several recent works reveal that physicians joined the Nazi party in disproportionate numbers and lent both their efforts and their authority to Nazi eugenic and racist programs. While the crimes of the physician Mengele and a few others are well known, recent research points to a much broader involvement by the profession, even in its everyday clinical work. Analogous activities existed in the German legal and industrial communities; disruption of the medical ethic thus sprang from the broader social contexts of Nazi Germany. The new United States Holocaust Memorial Museum, now opening on the Mall in Washington, D.C., will have an opportunity to educate the public about both the great crimes at Auschwitz and other camps, and the gradual but thorough degradation of ethics in the German medical profession. From this presentation, contemporary bioethics can ponder the proper use of the Nazi analogy in bioethical debate.

Effects of source shape on the numerical aperture factor with a geometrical-optics model.

PubMed

Wan, Der-Shen; Schmit, Joanna; Novak, Erik

2004-04-01

We study the effects of an extended light source on the calibration of an interference microscope, also referred to as an optical profiler. Theoretical and experimental numerical aperture (NA) factors for circular and linear light sources along with collimated laser illumination demonstrate that the shape of the light source or effective aperture cone is critical for a correct NA factor calculation. In practice, more-accurate results for the NA factor are obtained when a linear approximation to the filament light source shape is used in a geometric model. We show that previously measured and derived NA factors show some discrepancies because a circular rather than linear approximation to the filament source was used in the modeling.

Opacity meter for monitoring exhaust emissions from non-stationary sources

DOEpatents

Dec, John Edward

2000-01-01

Method and apparatus for determining the opacity of exhaust plumes from moving emissions sources. In operation, a light source is activated at a time prior to the arrival of a diesel locomotive at a measurement point, by means of a track trigger switch or the Automatic Equipment Identification system, such that the opacity measurement is synchronized with the passage of an exhaust plume past the measurement point. A beam of light from the light source passes through the exhaust plume of the locomotive and is detected by a suitable detector, preferably a high-rate photodiode. The light beam is well-collimated and is preferably monochromatic, permitting the use of a narrowband pass filter to discriminate against background light. In order to span a double railroad track and provide a beam which is substantially stronger than background, the light source, preferably a diode laser, must provide a locally intense beam. A high intensity light source is also desirable in order to increase accuracy at the high sampling rates required. Also included is a computer control system useful for data acquisition, manipulation, storage and transmission of opacity data and the identification of the associated diesel engine to a central data collection center.

Thumb-actuated two-axis controller

NASA Technical Reports Server (NTRS)

Hollow, R. H. (Inventor)

1986-01-01

A two axis joystick controller is described. It produces at least one output signal in relation to pivotal displacement of a member with respect to an intersection of the two axes. The member is pivotally movable on a support with respect to the two axes. The support has a centrally disposed aperture. A light source is mounted on the pivotally movable member above the aperture to direct light through the aperture. A light sensor is mounted below the aperture in the support at the intersection of the two axes to receive the light from the light source directed through the aperture. The light sensor produces at least one output signal related to a location on the sensor at which the light from the light source strikes the sensor.

Airborne Camera System for Real-Time Applications - Support of a National Civil Protection Exercise

NASA Astrophysics Data System (ADS)

Gstaiger, V.; Romer, H.; Rosenbaum, D.; Henkel, F.

2015-04-01

In the VABENE++ project of the German Aerospace Center (DLR), powerful tools are being developed to aid public authorities and organizations with security responsibilities as well as traffic authorities when dealing with disasters and large public events. One focus lies on the acquisition of high resolution aerial imagery, its fully automatic processing, analysis and near real-time provision to decision makers in emergency situations. For this purpose a camera system was developed to be operated from a helicopter with light-weight processing units and microwave link for fast data transfer. In order to meet end-users' requirements DLR works close together with the German Federal Office of Civil Protection and Disaster Assistance (BBK) within this project. One task of BBK is to establish, maintain and train the German Medical Task Force (MTF), which gets deployed nationwide in case of large-scale disasters. In October 2014, several units of the MTF were deployed for the first time in the framework of a national civil protection exercise in Brandenburg. The VABENE++ team joined the exercise and provided near real-time aerial imagery, videos and derived traffic information to support the direction of the MTF and to identify needs for further improvements and developments. In this contribution the authors introduce the new airborne camera system together with its near real-time processing components and share experiences gained during the national civil protection exercise.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Tong, Tao; Letoquin, Ronan; Keller, Bernd

An LED lamp or bulb is disclosed that comprises a light source, a heat sink structure and a remote planar phosphor carrier having at least one conversion material. The phosphor carrier can be remote to the light sources and mounted to the heat sink so that heat from the phosphor carrier spreads into the heat sink. The phosphor carrier can comprise a thermally conductive transparent material and a phosphor layer, with an LED based light source mounted to the heat sink such that light from the light source passes through the phosphor carrier. At least some of the LED lightmore » is converted by the phosphor carrier, with some lamp embodiments emitting a white light combination of LED and phosphor light. The phosphor arranged according to the present invention can operate at lower temperature to thereby operate at greater phosphor conversion efficiency and with reduced heat related damage to the phosphor.« less

In situ calibration of a light source in a sensor device

DOEpatents

Okandan, Murat; Serkland, Darwin k.; Merchant, Bion J.

2015-12-29

A sensor device is described herein, wherein the sensor device includes an optical measurement system, such as an interferometer. The sensor device further includes a low-power light source that is configured to emit an optical signal having a constant wavelength, wherein accuracy of a measurement output by the sensor device is dependent upon the optical signal having the constant wavelength. At least a portion of the optical signal is directed to a vapor cell, the vapor cell including an atomic species that absorbs light having the constant wavelength. A photodetector captures light that exits the vapor cell, and generates an electrical signal that is indicative of intensity of the light that exits the vapor cell. A control circuit controls operation of the light source based upon the electrical signal, such that the light source emits the optical signal with the constant wavelength.

White LED compared with other light sources: age-dependent photobiological effects and parameters for evaluation.

PubMed

Rebec, Katja Malovrh; Klanjšek-Gunde, Marta; Bizjak, Grega; Kobav, Matej B

2015-01-01

Ergonomic science at work and living places should appraise human factors concerning the photobiological effects of lighting. Thorough knowledge on this subject has been gained in the past; however, few attempts have been made to propose suitable evaluation parameters. The blue light hazard and its influence on melatonin secretion in age-dependent observers is considered in this paper and parameters for its evaluation are proposed. New parameters were applied to analyse the effects of white light-emitting diode (LED) light sources and to compare them with the currently applied light sources. The photobiological effects of light sources with the same illuminance but different spectral power distribution were determined for healthy 4-76-year-old observers. The suitability of new parameters is discussed. Correlated colour temperature, the only parameter currently used to assess photobiological effects, is evaluated and compared to new parameters.

Apparatus and Method for Focusing a Light Beam in a Three-Dimensional Recording Medium by a Dynamic Holographic Device

NASA Technical Reports Server (NTRS)

Juday, Richard D. (Inventor)

1998-01-01

An apparatus is disclosed for reading and/or writing information or to from an optical recording medium having a plurality of information storage layers. The apparatus includes a dynamic holographic optical element configured to focus light on the optical recording medium. a control circuit arranged to supply a drive signal to the holographic optical element, and a storage device in communication with the control circuit and storing at least a first drive signal and a second drive signal. The holographic optical element focusses light on a first one of the plurality of information storage layers when driven by the first drive signal on a second one of the plurality of information storage layers when driven by the second drive signal. An optical switch is also disclosed for connecting at least one light source in a source array to at least one light receiver in a receiver array. The switch includes a dynamic holographic optical element configured to receive light from the source array and to transmit light to the receiver array, a control circuit arranged to supply a drive signal to the holographic optical element, and a storage device in communication with the control circuit and storing at least a first drive signal and a second drive signal. The holographic optical element connects a first light source in the source array to a first light receiver in the receiver array when driven by the first drive signal and the holographic optical element connects the first light source with the first light receiver and a second light receiver when driven by the second drive signal.

Reflector system for a lighting fixture

DOEpatents

Siminovitch, Michael J.; Page, Erik; Gould, Carl T.

1998-01-01

Disclosed herein is a reflector system for a lighting fixture having a illumination source surrounded by an envelope. The reflector system includes a first reflector surrounding the illumination source. The reflector system also includes a second reflector which is non-contiguous with the first reflector and which surrounds the illumination source. The illumination source creates light rays which are reflected by the first and second reflectors. The first reflector directs light rays toward the center line of the fixture. However, the reflected rays despite being so reflected do not substantially intersect the envelope. The reflected light rays from the second reflector being directed so that they diverge from the center line of the fixture avoiding intersection with the semi-transparent envelope.

Reflector system for a lighting fixture

DOEpatents

Siminovitch, Michael J.; Page, Erik; Gould, Carl T.

2001-01-01

Disclosed herein is a reflector system for a lighting fixture having a illumination source surrounded by an envelope. The reflector system includes a first reflector surrounding the illumination source. The reflector system also includes a second reflector which is non-contiguous with the first reflector and which surrounds the illumination source. The illumination source creates light rays which are reflected by the first and second reflectors. The first reflector directs light rays toward the center line of the fixture. However, the reflected rays despite being so reflected do not substantially intersect the envelope. The reflected light rays from the second reflector being directed so that they diverge from the center line of the fixture avoiding intersection with the semi-transparent envelope.

Electrical source of pseudothermal light

NASA Astrophysics Data System (ADS)

Kuusela, Tom A.

2018-06-01

We describe a simple and compact electrical version of a pseudothermal light source. The source is based on electrical white noise whose spectral properties are tailored by analog filters. This signal is used to drive a light-emitting diode. The type of second-order coherence of the output light can be either Gaussian or Lorentzian, and the intensity distribution can be either Gaussian or non-Gaussian. The output light field is similar in all viewing angles, and thus, there is no need for a small aperture or optical fiber in temporal coherence analysis.

Sources of background light on space based laser communications links

NASA Astrophysics Data System (ADS)

Farrell, Thomas C.

2018-05-01

We discuss the sources and levels of background light that should be expected on space based laser communication (lasercom) crosslinks and uplinks, as well as on downlinks to ground stations. The analyses are valid for both Earth orbiting satellites and inter-planetary links. Fundamental equations are derived suitable for first order system engineering analyses of potential lasercom systems. These divide sources of background light into two general categories: extended sources which fill the field of view of a receiver's optics, and point sources which cannot be resolved by the optics. Specific sources of background light are discussed, and expected power levels are estimated. For uplinks, reflected sunlight and blackbody radiation from the Earth dominates. For crosslinks, depending on specific link geometry, sources of background light may include the Sun in the field of view (FOV), reflected sunlight and blackbody radiation from planets and other bodies in the solar system, individual bright stars in the FOV, the amalgam of dim stars in the FOV, zodiacal light, and reflected sunlight off of the transmitting spacecraft. For downlinks, all of these potentially come into play, and the effects of the atmosphere, including turbulence, scattering, and absorption contribute as well. Methods for accounting for each of these are presented. Specific examples are presented to illustrate the relative contributions of each source for various link geometries.

Noncoherent light for PDT of spontaneous animal tumors

NASA Astrophysics Data System (ADS)

Lucroy, Michael D.; Ridgway, Tisha D.; Higbee, Russell G.; Reeds, Kimberly

2004-07-01

Cultured 9L cells were incubated with graded doses of pheophorbide-a-hexyl ether (HPPH) and exposed to 665 nm red light from either a noncoherent light source or a KTP-pumped dye laser. Cell death was observed after irradiation using either light source, with the noncoherent light being most effective at the highest HPPH concentrations. To determing the practicality of using the noncoherent light source for clinical PDT, dogs and cats with spontaneous tumors were injected intravenously with 0.15 mg/kg HPPH one hour before their tumors were irradiated with 665 nm noncoherent light (50 mW cm-2, 100 J cm-2). Of the 9 tumors treated, 8 complete responses were observed, all of which occurred in animals with squamous cell carcinoma. After 68 weeks of follow up, the median initial disease free interval had not been reached. These data support the use of noncoherent light sources for PDT of spontaneous tumors in animals, representing a cost-effective alternative to medical lasers in both veterinary and human dermatology and oncology.

Simulated and measured neutron/gamma light output distribution for poly-energetic neutron/gamma sources

NASA Astrophysics Data System (ADS)

Hosseini, S. A.; Zangian, M.; Aghabozorgi, S.

2018-03-01

In the present paper, the light output distribution due to poly-energetic neutron/gamma (neutron or gamma) source was calculated using the developed MCNPX-ESUT-PE (MCNPX-Energy engineering of Sharif University of Technology-Poly Energetic version) computational code. The simulation of light output distribution includes the modeling of the particle transport, the calculation of scintillation photons induced by charged particles, simulation of the scintillation photon transport and considering the light resolution obtained from the experiment. The developed computational code is able to simulate the light output distribution due to any neutron/gamma source. In the experimental step of the present study, the neutron-gamma discrimination based on the light output distribution was performed using the zero crossing method. As a case study, 241Am-9Be source was considered and the simulated and measured neutron/gamma light output distributions were compared. There is an acceptable agreement between the discriminated neutron/gamma light output distributions obtained from the simulation and experiment.

Evaluation of light detector surface area for functional Near Infrared Spectroscopy.

PubMed

Wang, Lei; Ayaz, Hasan; Izzetoglu, Meltem; Onaral, Banu

2017-10-01

Functional Near Infrared Spectroscopy (fNIRS) is an emerging neuroimaging technique that utilizes near infrared light to detect cortical concentration changes of oxy-hemoglobin and deoxy-hemoglobin non-invasively. Using light sources and detectors over the scalp, multi-wavelength light intensities are recorded as time series and converted to concentration changes of hemoglobin via modified Beer-Lambert law. Here, we describe a potential source for systematic error in the calculation of hemoglobin changes and light intensity measurements. Previous system characterization and analysis studies looked into various fNIRS parameters such as type of light source, number and selection of wavelengths, distance between light source and detector. In this study, we have analyzed the contribution of light detector surface area to the overall outcome. Results from Monte Carlo based digital phantoms indicated that selection of detector area is a critical system parameter in minimizing the error in concentration calculations. The findings here can guide the design of future fNIRS sensors. Copyright © 2017 Elsevier Ltd. All rights reserved.

The Linac Coherent Light Source

DOE PAGES

White, William E.; Robert, Aymeric; Dunne, Mike

2015-05-01

The Linac Coherent Light Source (LCLS) at the SLAC National Accelerator Laboratory was the first hard X-ray free-electron laser (FEL) to operate as a user facility. After five years of operation, LCLS is now a mature FEL user facility. Our personal views about opportunities and challenges inherent to these unique light sources are discussed.

21 CFR 352.71 - Light source (solar simulator).

Code of Federal Regulations, 2010 CFR

2010-04-01

... 21 Food and Drugs 5 2010-04-01 2010-04-01 false Light source (solar simulator). 352.71 Section 352... Procedures § 352.71 Light source (solar simulator). A solar simulator used for determining the SPF of a... nanometers. In addition, a solar simulator should have no significant time-related fluctuations in radiation...

21 CFR 352.71 - Light source (solar simulator).

Code of Federal Regulations, 2011 CFR

2011-04-01

... 21 Food and Drugs 5 2011-04-01 2011-04-01 false Light source (solar simulator). 352.71 Section 352... Procedures § 352.71 Light source (solar simulator). A solar simulator used for determining the SPF of a... nanometers. In addition, a solar simulator should have no significant time-related fluctuations in radiation...

21 CFR 352.71 - Light source (solar simulator).

Code of Federal Regulations, 2013 CFR

2013-04-01

... 21 Food and Drugs 5 2013-04-01 2013-04-01 false Light source (solar simulator). 352.71 Section 352... Procedures § 352.71 Light source (solar simulator). A solar simulator used for determining the SPF of a... of its total energy output contributed by nonsolar wavelengths shorter than 290 nanometers; and it...

21 CFR 352.71 - Light source (solar simulator).

Code of Federal Regulations, 2014 CFR

2014-04-01

... 21 Food and Drugs 5 2014-04-01 2014-04-01 false Light source (solar simulator). 352.71 Section 352.71 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED... Procedures § 352.71 Light source (solar simulator). A solar simulator used for determining the SPF of a...

21 CFR 352.71 - Light source (solar simulator).

Code of Federal Regulations, 2012 CFR

2012-04-01

... 21 Food and Drugs 5 2012-04-01 2012-04-01 false Light source (solar simulator). 352.71 Section 352.71 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED... Procedures § 352.71 Light source (solar simulator). A solar simulator used for determining the SPF of a...

A multi-country Salmonella Enteritidis phage type 14b outbreak associated with eggs from a German producer: 'near real-time' application of whole genome sequencing and food chain investigations, United Kingdom, May to September 2014.

PubMed

Inns, T; Lane, C; Peters, T; Dallman, T; Chatt, C; McFarland, N; Crook, P; Bishop, T; Edge, J; Hawker, J; Elson, R; Neal, K; Adak, G K; Cleary, P

2015-04-23

We report an outbreak of Salmonella Enteritidis phage type 14b (PT14b) in the United Kingdom (UK) between May and September 2014 where Public Health England launched an investigation to identify the source of infection and implement control measures. During the same period, outbreaks caused by a Salmonella Enteritidis strain with a specific multilocus variable-number tandem repeat analysis (MLVA) profile occurred in other European Union Member States. Isolates from a number of persons affected by the UK outbreak, who had initially been tested by MLVA also shared this particular profile. Cases were defined as any person infected with S. Enteritidis PT14b, resident in England or Wales and without history of travel outside of this geographical area during the incubation period, reported from 1 June 2014 onwards, with a MLVA profile of 2–11–9-7–4-3–2-8–9 or a single locus variant thereof. In total, 287 cases met the definition. Food traceback investigations in the UK and other affected European countries linked the outbreaks to chicken eggs from a German company. We undertook whole genome sequencing of isolates from UK and European cases, implicated UK premises, and German eggs: isolates were highly similar. Combined with food traceback information, this confirmed that the UK outbreak was also linked to a German producer.

Low-energy light bulbs, computers, tablets and the blue light hazard.

PubMed

O'Hagan, J B; Khazova, M; Price, L L A

2016-02-01

The introduction of low energy lighting and the widespread use of computer and mobile technologies have changed the exposure of human eyes to light. Occasional claims that the light sources with emissions containing blue light may cause eye damage raise concerns in the media. The aim of the study was to determine if it was appropriate to issue advice on the public health concerns. A number of sources were assessed and the exposure conditions were compared with international exposure limits, and the exposure likely to be received from staring at a blue sky. None of the sources assessed approached the exposure limits, even for extended viewing times.

Innovative design of parabolic reflector light guiding structure

NASA Astrophysics Data System (ADS)

Whang, Allen J.; Tso, Chun-Hsien; Chen, Yi-Yung

2008-02-01

Due to the idea of everlasting green architecture, it is of increasing importance to guild natural light into indoors. The advantages are multifold - to have better color rendering index, excellent energy savings from environments viewpoints and make humans more healthy, etc. Our search is to design an innovative structure, to convert outdoor sun light impinges on larger surfaces, into near linear light beam sources, later convert this light beam into near point sources which enters the indoor spaces then can be used as lighting sources indoors. We are not involved with the opto-electrical transformation, to the guild light into to the building, to perform the illumination, as well as the imaging function. Because non-imaging optics, well known for apply to the solar concentrators, that can use non-imaging structures to fulfill our needs, which can also be used as energy collectors in solar energy devices. Here, we have designed a pair of large and small parabolic reflector, which can be used to collect daylight and change area from large to small. Then we make a light-guide system that is been designed by us use of this parabolic reflector to guide the collection light, can pick up the performance for large surface source change to near linear source and a larger collection area.

Seeing "the Dress" in the Right Light: Perceived Colors and Inferred Light Sources.

PubMed

Chetverikov, Andrey; Ivanchei, Ivan

2016-08-01

In the well-known "dress" photograph, people either see the dress as blue with black stripes or as white with golden stripes. We suggest that the perception of colors is guided by the scene interpretation and the inferred positions of light sources. We tested this hypothesis in two online studies using color matching to estimate the colors observers see, while controlling for individual differences in gray point bias and color discrimination. Study 1 demonstrates that the interpretation of the dress corresponds to differences in perceived colors. Moreover, people who perceive the dress as blue-and-black are two times more likely to consider the light source as frontal, than those who see the white-and-gold dress. The inferred light sources, in turn, depend on the circadian changes in ambient light. The interpretation of the scene background as a wall or a mirror is consistent with the perceived colors as well. Study 2 shows that matching provides reliable results on differing devices and replicates the findings on scene interpretation and light sources. Additionally, we show that participants' environmental lighting conditions are an important cue for perceiving the dress colors. The exact mechanisms of how environmental lighting and circadian changes influence the perceived colors of the dress deserve further investigation.

Influence of the correlated color temperature of a light source on the color discrimination capacity of the observer.

PubMed

Pardo, Pedro J; Cordero, Eduardo M; Suero, María Isabel; Pérez, Ángel L

2012-02-01

It is well known that there are different preferences in correlated color temperature of light sources for daily living activities or for viewing artistic paintings. There are also data relating the capacity of observers to make judgments on color differences with the spectral power distribution of the light source used. The present work describes a visual color discrimination experiment whose results confirm the existence of a relationship between the correlated color temperature of a light source and the color discrimination capacities of the observers. © 2012 Optical Society of America

Rapid Optical Shutter, Chopper, Modulator and Deflector

NASA Technical Reports Server (NTRS)

Danehy, Paul M. (Inventor)

2017-01-01

An optical device with a light source and a detector is provided. A digital micromirror device positioned between the detector and the light source may deflect light beams projected from the light source. An aperture in front of the detector may block an incoming light beam from the detector when the incoming light beam is incident on the detector outside of a passable incident range and including an aperture opening configured to pass the incoming light beam to the detector when the incoming light beam is incident on the detector within a passable incident range. The digital micromirror device may rotate between a first position causing the light beam to pass through the aperture opening and a second position causing the light beam to be blocked by the aperture. The optical device may be configured to operate as a shutter, chopper, modulator and/or deflector.

Light use efficiency for vegetables production in protected and indoor environments

NASA Astrophysics Data System (ADS)

Cocetta, Giacomo; Casciani, Daria; Bulgari, Roberta; Musante, Fulvio; Kołton, Anna; Rossi, Maurizio; Ferrante, Antonio

2017-01-01

In recent years, there is a growing interest for vegetables production in indoor or disadvantaged climatic zones by using greenhouses. The main problem of crop growing indoor or in environment with limited light availability is the correct choice of light source and the quality of lighting spectrum. In greenhouse and indoor cultivations, plant density is higher than in the open field and plants have to compete for light and nutrients. Nowadays, advanced systems for indoor horticulture use light emitting diodes (LED) for improving crop growth, enhancing the plant productivity and favouring the best nutritional quality formation. In closed environments, as indoor growing modules, the lighting system represents the only source of light and its features are fundamental for obtaining the best lighting performances for plant and the most efficient solution. LED lighting engines are more efficient compared to the lighting sources used traditionally in horticulture and allow light spectrum and intensity modulations to enhance the light use efficiency for plants. The lighting distribution and the digital controls are fundamental for tailoring the spectral distribution on each plant in specific moments of its growth and play an important role for optimizing growth and produce high-quality vegetables. LED lights can increase plant growth and yield, but also nutraceutical quality, since some light intensities increase pigments biosynthesis and enhance the antioxidants content of leaves or fruits: in this regards the selection of LED primary light sources in relation to the peaks of the absorbance curve of the plants is important.

A stochastic storm surge generator for the German North Sea and the multivariate statistical assessment of the simulation results

NASA Astrophysics Data System (ADS)

Wahl, Thomas; Jensen, Jürgen; Mudersbach, Christoph

2010-05-01

Storm surges along the German North Sea coastline led to major damages in the past and the risk of inundation is expected to increase in the course of an ongoing climate change. The knowledge of the characteristics of possible storm surges is essential for the performance of integrated risk analyses, e.g. based on the source-pathway-receptor concept. The latter includes the storm surge simulation/analyses (source), modelling of dike/dune breach scenarios (pathway) and the quantification of potential losses (receptor). In subproject 1b of the German joint research project XtremRisK (www.xtremrisk.de), a stochastic storm surge generator for the south-eastern North Sea area is developed. The input data for the multivariate model are high resolution sea level observations from tide gauges during extreme events. Based on 25 parameters (19 sea level parameters and 6 time parameters) observed storm surge hydrographs consisting of three tides are parameterised. Followed by the adaption of common parametric probability distributions and a large number of Monte-Carlo-Simulations, the final reconstruction leads to a set of 100.000 (default) synthetic storm surge events with a one-minute resolution. Such a data set can potentially serve as the basis for a large number of applications. For risk analyses, storm surges with peak water levels exceeding the design water levels are of special interest. The occurrence probabilities of the simulated extreme events are estimated based on multivariate statistics, considering the parameters "peak water level" and "fullness/intensity". In the past, most studies considered only the peak water levels during extreme events, which might not be the most important parameter in any cases. Here, a 2D-Archimedian copula model is used for the estimation of the joint probabilities of the selected parameters, accounting for the structures of dependence overlooking the margins. In coordination with subproject 1a, the results will be used as the input for the XtremRisK subprojects 2 to 4. The project is funded by the German Federal Ministry of Education and Research (BMBF) (Project No. 03 F 0483 B).

A broadband LED source in visible to short-wave-infrared wavelengths for spectral tumor diagnostics

NASA Astrophysics Data System (ADS)

Hayashi, Daiyu; van Dongen, Anne Marie; Boerekamp, Jack; Spoor, Sandra; Lucassen, Gerald; Schleipen, Jean

2017-06-01

Various tumor types exhibit the spectral fingerprints in the absorption and reflection spectra in visible and especially in near- to short-wave-infrared wavelength ranges. For the purpose of spectral tumor diagnostics by means of diffuse reflectance spectroscopy, we developed a broadband light emitting diode (LED) source consisting of a blue LED for optical excitation, Lu3Al5O12:Ce3+,Cr3+ luminescent garnet for visible to near infrared emissions, and Bismuth doped GeO2 luminescent glass for near-infrared to short-wave infrared emissions. It emits broad-band light emissions continuously in 470-1600 nm with a spectral gap at 900-1000 nm. In comparison to the currently available broadband light sources like halogen lamps, high-pressure discharge lamps and super continuum lasers, the light sources of this paper has significant advantages for spectral tissue diagnostics in high-spectral stability, improved light coupling to optical fibers, potential in low light source cost and enabling battery-drive.

Apparatus and method for generating partially coherent illumination for photolithography

DOEpatents

Sweatt, William C.

2001-01-01

The present invention introduces a novel scatter plate into the optical path of source light used for illuminating a replicated object. The scatter plate has been designed to interrupt a focused, incoming light beam by introducing between about 8 to 24 diffraction zones blazed onto the surface of the scatter plate which intercept the light and redirect it to a like number of different positions in the condenser entrance pupil each of which is determined by the relative orientation and the spatial frequency of the diffraction grating in each of the several zones. Light falling onto the scatter plate, therefore, generates a plurality of unphased sources of illumination as seen by the back half of the optical system. The system comprises a high brightness source, such as a laser, creating light which is taken up by a beam forming optic which focuses the incoming light into a condenser which in turn, focuses light into a field lens creating Kohler illumination image of the source in a camera entrance pupil. The light passing through the field lens illuminates a mask which interrupts the source light as either a positive or negative image of the object to be replicated. Light passing by the mask is focused into the entrance pupil of the lithographic camera creating an image of the mask onto a receptive media.

A Geometric Model for Specularity Prediction on Planar Surfaces with Multiple Light Sources.

PubMed

Morgand, Alexandre; Tamaazousti, Mohamed; Bartoli, Adrien

2018-05-01

Specularities are often problematic in computer vision since they impact the dynamic range of the image intensity. A natural approach would be to predict and discard them using computer graphics models. However, these models depend on parameters which are difficult to estimate (light sources, objects' material properties and camera). We present a geometric model called JOLIMAS: JOint LIght-MAterial Specularity, which predicts the shape of specularities. JOLIMAS is reconstructed from images of specularities observed on a planar surface. It implicitly includes light and material properties, which are intrinsic to specularities. This model was motivated by the observation that specularities have a conic shape on planar surfaces. The conic shape is obtained by projecting a fixed quadric on the planar surface. JOLIMAS thus predicts the specularity using a simple geometric approach with static parameters (object material and light source shape). It is adapted to indoor light sources such as light bulbs and fluorescent lamps. The prediction has been tested on synthetic and real sequences. It works in a multi-light context by reconstructing a quadric for each light source with special cases such as lights being switched on or off. We also used specularity prediction for dynamic retexturing and obtained convincing rendering results. Further results are presented as supplementary video material, which can be found on the Computer Society Digital Library at http://doi.ieeecomputersociety.org/10.1109/TVCG.2017.2677445.

Apparatus and method for generating partially coherent illumination for photolithography

DOEpatents

Sweatt, W.C.

1999-07-06

The present invention relates an apparatus and method for creating a bright, uniform source of partially coherent radiation for illuminating a pattern, in order to replicate an image of said pattern with a high degree of acuity. The present invention introduces a novel scatter plate into the optical path of source light used for illuminating a replicated object. The scatter plate has been designed to interrupt a focused, incoming light beam by introducing between about 8 to 24 diffraction zones blazed onto the surface of the scatter plate which intercept the light and redirect it to a like number of different positions in the condenser entrance pupil each of which is determined by the relative orientation and the spatial frequency of the diffraction grating in each of the several zones. Light falling onto the scatter plate, therefore, generates a plurality of unphased sources of illumination as seen by the back half of the optical system. The system includes a high brightness source, such as a laser, creating light which is taken up by a beam forming optic which focuses the incoming light into a condenser which in turn, focuses light into a field lens creating Kohler illumination image of the source in a camera entrance pupil. The light passing through the field lens illuminates a mask which interrupts the source light as either a positive or negative image of the object to be replicated. Light passing by the mask is focused into the entrance pupil of the lithographic camera creating an image of the mask onto a receptive media. 7 figs.

Apparatus and method for generating partially coherent illumination for photolithography

DOEpatents

Sweatt, William C.

1999-01-01

The present invention relates an apparatus and method for creating a bright, uniform source of partially coherent radiation for illuminating a pattern, in order to replicate an image of said pattern with a high degree of acuity. The present invention introduces a novel scatter plate into the optical path of source light used for illuminating a replicated object. The scatter plate has been designed to interrupt a focused, incoming light beam by introducing between about 8 to 24 diffraction zones blazed onto the surface of the scatter plate which intercept the light and redirect it to a like number of different positions in the condenser entrance pupil each of which is determined by the relative orientation and the spatial frequency of the diffraction grating in each of the several zones. Light falling onto the scatter plate, therefore, generates a plurality of unphased sources of illumination as seen by the back half of the optical system. The system includes a high brightness source, such as a laser, creating light which is taken up by a beam forming optic which focuses the incoming light into a condenser which in turn, focuses light into a field lens creating Kohler illumination image of the source in a camera entrance pupil. The light passing through the field lens illuminates a mask which interrupts the source light as either a positive or negative image of the object to be replicated. Light passing by the mask is focused into the entrance pupil of the lithographic camera creating an image of the mask onto a receptive media.

Conceptual design of a stray light facility for Earth observation satellites

NASA Astrophysics Data System (ADS)

Stockman, Y.; Hellin, M. L.; Marcotte, S.; Mazy, E.; Versluys, J.; François, M.; Taccola, M.; Zuccaro Marchi, A.

2017-11-01

With the upcoming of TMA or FMA (Three or Four Mirrors Anastigmat) telescope design in Earth Observation system, stray light is a major contributor to the degradation of the image quality. Numerous sources of stray light can be identified and theoretically evaluated. Nevertheless in order to build a stray light model of the instrument, the Point Spread Function(s) of the instrument, i.e., the flux response of the instrument to the flux received at the instrument entrance from an infinite distant point source needs to be determined. This paper presents a conceptual design of a facility placed in a vacuum chamber to eliminate undesired air particles scatter light sources. The specification of the clean room class or vacuum will depend on the required rejection to be measured. Once the vacuum chamber is closed, the stray light level from the external environment can be considered as negligible. Inside the chamber a dedicated baffle design is required to eliminate undesired light generated by the set up itself e.g. retro reflected light away from the instrument under test. This implies blackened shrouds all around the specimen. The proposed illumination system is a 400 mm off axis parabolic mirror with a focal length of 2 m. The off axis design suppresses the problem of stray light that can be generated by the internal obstruction. A dedicated block source is evaluated in order to avoid any stray light coming from the structure around the source pinhole. Dedicated attention is required on the selection of the source to achieve the required large measurement dynamic.

Illuminating system and method for specialized and decorative lighting using liquid light guides

DOEpatents

Zorn, C.J.; Kross, B.J.; Majewski, S.; Wojcik, R.F.

1998-08-25

The present invention comprises an illumination system for specialized decorative lighting including a light source, a flexible plastic tube sheath for distributing the light to a remote location, a transparent liquid core filling the tube that has an index of refraction greater than that of the plastic tube and an arrangement where light coupled from the light source is caused to leak from the liquid light guide at desired locations for the purposes of specialized lighting, such as underwater illumination in swimming pools. 5 figs.

Illuminating system and method for specialized and decorative lighting using liquid light guides

DOEpatents

Zorn, Carl J.; Kross, Brian J.; Majewski, Stanislaw; Wojcik, Randolph F.

1998-01-01

The present invention comprises an illumination system for specialized decorative lighting including a light source, a flexible plastic tube sheath for distributing the light to a remote location, a transparent liquid core filling the tube that has an index of refraction greater than that of the plastic tube and an arrangement where light coupled from the light source is caused to leak from the liquid light guide at desired locations for the purposes of specialized lighting, such as underwater illumination in swimming pools.

[Nickel levels in female dermatological patients].

PubMed

Schwegler, U; Twardella, D; Fedorov, M; Darsow, U; Schaller, K-H; Habernegg, R; Behrendt, H; Fromme, H

2009-07-01

Nickel levels in urine were determined among 163 female dermatological patients aged 18 to 46 years. Data on life-style factors were collected in parallel via a questionnaire. Urinary nickel excretion was in the normal range of the German female population (0.2-46.1 microg Ni/g creatinine). The 95th percentile (3.9 microg Ni/l urine) exceeded the German reference value (3.0 microg Ni/l urine). In the multivariate regression analyses we found a statistically significant increase of ln-transformed nickel levels with increase in age and in women using dietary supplements. The following variables were not associated with Nickel urine levels: suffering from nickel eczema, smoking, drinking stagnated water, eating foods with high nickel contents and using nickel-containing kitchen utensils as, for example, an electric kettle with an open heater coil. We conclude that personal urinary levels should be assessed with simultaneous consideration of habits and life-style factors. A German national survery would be useful. Those patients who experience the exacerbation of their eczema in cases of oral provocation, for example, by a high nickel diet should be aware of potential sources of nickel, such as supplements.

Web 2.0 in healthcare: state-of-the-art in the German health insurance landscape.

PubMed

Kuehne, Mirko; Blinn, Nadine; Rosenkranz, Christoph; Nuettgens, Markus

2011-01-01

The Internet is increasingly used as a source for information and knowledge. Even in the field of healthcare, information is widely available. Patients and their relatives increasingly use the Internet in order to search for healthcare information and applications. "Health 2.0" - the increasing use of Web 2.0 technologies and tools in Electronic Healthcare - promises new ways of interaction, communication, and participation for healthcare. In order to explore how Web 2.0 applications are in general adopted and implemented by health information providers, we analysed the websites of all German health insurances companies regarding their provision of Web 2.0 applications. As health insurances play a highly relevant role in the German healthcare system, we conduct an exploratory survey in order to provide answers about the adoption and implementation of Web 2.0 technologies. Hence, all 198 private and public health insurances were analysed according to their websites. The results show a wide spread diffusion of Web 2.0 applications but also huge differences between the implementation by the respective insurances. Therefore, our findings provide a foundation for further research on aspects that drive the adoption.

Aethalometer

DOEpatents

Hansen, Anthony D.

1990-01-01

An improved aethalometer (10) having a single light source (18) and a single light detector (20) and two light paths (21, 22) from the light source (18) to the light detector (20). A quartz fiber filter (13) is inserted in the device, the filter (13) having a collection area (23) in one light path (21) and a reference area (24) in the other light path (22). A gas flow path (46) through the aethalometer housing (11) allows ambient air to flow through the collection area (23) of the filter (13) so that aerosol particles can be collected on the filter. A rotating disk (31) with an opening (33) therethrough allows light for the light source (18) to pass alternately through the two light paths (21, 22). The voltage output of the detector (20) is applied to a VCO (52) and the VCO pulses for light transmission separately through the two light paths (21, 22 ) are counted and compared to determine the absorption coefficient of the collected aerosol particles.

Centralized light-source optical access network based on polarization multiplexing.

PubMed

Grassi, Fulvio; Mora, José; Ortega, Beatriz; Capmany, José

2010-03-01

This paper presents and demonstrates a centralized light source optical access network based on optical polarization multiplexing technique. By using two optical sources emitting light orthogonally polarized in the Central Node for downstream and upstream operations, the Remote Node is kept source-free. EVM values below telecommunication standard requirements have been measured experimentally when bidirectional digital signals have been transmitted over 10 km of SMF employing subcarrier multiplexing technique in the electrical domain.

Health systems strengthening in German development cooperation: making the case for a comprehensive strategy.

PubMed

Munir, Khullat; Worm, Ilse

2016-12-03

In the aftermath of the Ebola crisis and with renewed attention to resilient health systems, the process of improving approaches of global health actors to health systems strengthening is of great relevance. Despite the increased amount of attention paid to health systems strengthening, there is no standard definition of this concept among global health actors. Germany is no exception. Though there have been recent commitments to increase resources allocated to health systems strengthening, German Development Cooperation has no comprehensive strategy for its pursuit. This article sheds light on how HSS can be more clearly defined in German bilateral health cooperation, and makes a case for the adoption of a comprehensive HSS strategy.A strategic analysis of the German Development Cooperation's orientation towards health systems strengthening reveals the focal areas and cross-cutting approaches of Germany's engagement with the health systems strengthening. These elements are then linked to the building blocks of the health system, as defined by the World Health Organization. The resulting framework should be further elaborated with data from implementation to develop a comprehensive health systems strengthening strategy. Both the U.S. and U.K. have also recently reviewed their own health systems strengthening efforts and concluded with clear statements on the need for well-defined health systems strengthening strategies. We argue that in developing such strategies, a sound base can be provided by a health systems strengthening framework that is based on both strategic inputs from existing health policies as well as implementation experiences.Despite its limitations, the current framework provided in this review shows how the German Development Cooperation intends to enact health systems strengthening, and can thus have several uses: (1) ensure the systemic nature of health systems strengthening planning and implementation (2) guide the consistency of Germany's approach to health systems strengthening within partner countries and (3) create theories of change for health evaluations. This approach can potentially be applied to systematically interpret health systems strengthening strategies of other global health actors, leading to better coherence and accountability in health development efforts.

Extended source effect on microlensing light curves by an Ellis wormhole

NASA Astrophysics Data System (ADS)

Tsukamoto, Naoki; Gong, Yungui

2018-04-01

We can survey an Ellis wormhole which is the simplest Morris-Thorne wormhole in our Galaxy with microlensing. The light curve of a point source microlensed by the Ellis wormhole shows approximately 4% demagnification while the total magnification of images lensed by a Schwarzschild lens is always larger than unity. We investigate an extended source effect on the light curves microlensed by the Ellis wormhole. We show that the depth of the gutter of the light curves of an extended source is smaller than the one of a point source since the magnified part of the extended source cancels the demagnified part out. We can, however, distinguish between the light curves of the extended source microlensed by the Ellis wormhole and the ones by the Schwarzschild lens in their shapes even if the size of the source is a few times larger than the size of an Einstein ring on a source plane. If the relative velocity of a star with the radius of 1 06 km at 8 kpc in the bulge of our Galaxy against an observer-lens system is smaller than 10 km /s on a source plane, we can detect microlensing of the star lensed by the Ellis wormhole with the throat radius of 1 km at 4 kpc.

X-ray micro-Tomography at the Advanced Light Source

USDA-ARS?s Scientific Manuscript database

The X-ray micro-Tomography Facility at the Advanced Light Source has been in operation since 2004. The source is a superconducting bend magnet of critical energy 10.5KeV; photon energy coverage is 8-45 KeV in monochromatic mode, and a filtered white light option yields useful photons up to 50 KeV. A...

Reflector system for a lighting fixture

DOEpatents

Siminovitch, M.J.; Page, E.; Gould, C.T.

1998-09-08

Disclosed herein is a reflector system for a lighting fixture having a illumination source surrounded by an envelope. The reflector system includes a first reflector surrounding the illumination source. The reflector system also includes a second reflector which is non-contiguous with the first reflector and which surrounds the illumination source. The illumination source creates light rays which are reflected by the first and second reflectors. The first reflector directs light rays toward the center line of the fixture. However, the reflected rays despite being so reflected do not substantially intersect the envelope. The reflected light rays from the second reflector being directed so that they diverge from the center line of the fixture avoiding intersection with the semi-transparent envelope. 5 figs.

TM-30 Guidance

DOE Office of Scientific and Technical Information (OSTI.GOV)

Royer, Michael P.

Minimum color quality standards are necessary, because the light sources most efficient at producing lumens are impractical for use in architectural lighting due to poor color rendition. Thus, accurate measures of color rendition and accompanying performance criteria are essential for helping technology developers and users balance tradeoffs between energy efficiency and lighting quality. Setting higher color-rendition criteria while maintaining use of CRI (e.g., CRI ≥ 90) may filter out some unacceptable light sources, but also filters out many highly desirable light sources and requires a greater tradeoff with energy efficiency. In contrast, specifying color rendition using TM-30 Rf, Rg, andmore » Rcs,h1 has been shown to be effective for differentiating desirable sources while maintaining flexibility for technology development and energy efficiency.« less

Optimization of light source parameters in the photodynamic therapy of heterogeneous prostate

NASA Astrophysics Data System (ADS)

Li, Jun; Altschuler, Martin D.; Hahn, Stephen M.; Zhu, Timothy C.

2008-08-01

The three-dimensional (3D) heterogeneous distributions of optical properties in a patient prostate can now be measured in vivo. Such data can be used to obtain a more accurate light-fluence kernel. (For specified sources and points, the kernel gives the fluence delivered to a point by a source of unit strength.) In turn, the kernel can be used to solve the inverse problem that determines the source strengths needed to deliver a prescribed photodynamic therapy (PDT) dose (or light-fluence) distribution within the prostate (assuming uniform drug concentration). We have developed and tested computational procedures to use the new heterogeneous data to optimize delivered light-fluence. New problems arise, however, in quickly obtaining an accurate kernel following the insertion of interstitial light sources and data acquisition. (1) The light-fluence kernel must be calculated in 3D and separately for each light source, which increases kernel size. (2) An accurate kernel for light scattering in a heterogeneous medium requires ray tracing and volume partitioning, thus significant calculation time. To address these problems, two different kernels were examined and compared for speed of creation and accuracy of dose. Kernels derived more quickly involve simpler algorithms. Our goal is to achieve optimal dose planning with patient-specific heterogeneous optical data applied through accurate kernels, all within clinical times. The optimization process is restricted to accepting the given (interstitially inserted) sources, and determining the best source strengths with which to obtain a prescribed dose. The Cimmino feasibility algorithm is used for this purpose. The dose distribution and source weights obtained for each kernel are analyzed. In clinical use, optimization will also be performed prior to source insertion to obtain initial source positions, source lengths and source weights, but with the assumption of homogeneous optical properties. For this reason, we compare the results from heterogeneous optical data with those obtained from average homogeneous optical properties. The optimized treatment plans are also compared with the reference clinical plan, defined as the plan with sources of equal strength, distributed regularly in space, which delivers a mean value of prescribed fluence at detector locations within the treatment region. The study suggests that comprehensive optimization of source parameters (i.e. strengths, lengths and locations) is feasible, thus allowing acceptable dose coverage in a heterogeneous prostate PDT within the time constraints of the PDT procedure.

Design of a Borescope for Extravehicular Non-Destructive Applications

NASA Technical Reports Server (NTRS)

Bachnak, Rafic

2003-01-01

Anomalies such as corrosion, structural damage, misalignment, cracking, stress fiactures, pitting, or wear can be detected and monitored by the aid of a borescope. A borescope requires a source of light for proper operation. Today s current lighting technology market consists of incandescent lamps, fluorescent lamps and other types of electric arc and electric discharge vapor lamp. Recent advances in LED technology have made LEDs viable for a number of applications, including vehicle stoplights, traffic lights, machine-vision-inspection, illumination, and street signs. LEDs promise significant reduction in power consumption compared to other sources of light. This project focused on comparing images taken by the Olympus IPLEX, using two different light sources. One of the sources is the 50-W internal metal halide lamp and the other is a 1 W LED placed at the tip of the insertion tube. Images acquired using these two light sources were quantitatively compared using their histogram, intensity profile along a line segment, and edge detection. Also, images were qualitatively compared using image registration and transformation [l]. The gray-level histogram, edge detection, image profile and image registration do not offer conclusive results. The LED light source, however, produces good images for visual inspection by an operator. Analysis using pattern recognition using Eigenfaces and Gaussian Pyramid in face recognition may be more useful.

[A review of mixed gas detection system based on infrared spectroscopic technique].

PubMed

Dang, Jing-Min; Fu, Li; Yan, Zi-Hui; Zheng, Chuan-Tao; Chang, Yu-Chun; Chen, Chen; Wang, Yi-Din

2014-10-01

In order to provide the experiences and references to the researchers who are working on infrared (IR) mixed gas detection field. The proposed manuscript reviews two sections of the aforementioned field, including optical multiplexing structure and detection method. At present, the coherent light sources whose representative are quantum cascade laser (QCL) and inter-band cascade laser(ICL) become the mainstream light source in IR mixed gas detection, which replace the traditional non-coherent light source, such as IR radiation source and IR light emitting diode. In addition, the photon detector which has a super high detectivity and very short response time is gradually beyond thermal infrared detector, dominant in the field of infrared detector. The optical multiplexing structure is the key factor of IR mixed gas detection system, which consists of single light source multi-plexing detection structure and multi light source multiplexing detection structure. Particularly, single light source multiplexing detection structure is advantages of small volume and high integration, which make it a plausible candidate for the portable mixed gas detection system; Meanwhile, multi light source multiplexing detection structure is embodiment of time division multiplex, frequency division multiplexing and wavelength division multiplexing, and become the leading structure of the mixed gas detection system because of its wider spectral range, higher spectral resolution, etc. The detection method applied to IR mixed gas detection includes non-dispersive infrared (NDIR) spectroscopy, wavelength and frequency-modulation spectroscopy, cavity-enhanced spectroscopy and photoacoustic spectroscopy, etc. The IR mixed gas detection system designed by researchers after recognizing the whole sections of the proposed system, which play a significant role in industrial and agricultural production, environmental monitoring, and life science, etc.

An LED light source and novel fluorophore combinations improve fluorescence laparoscopic detection of metastatic pancreatic cancer in orthotopic mouse models.

PubMed

Metildi, Cristina A; Kaushal, Sharmeela; Lee, Claudia; Hardamon, Chanae R; Snyder, Cynthia S; Luiken, George A; Talamini, Mark A; Hoffman, Robert M; Bouvet, Michael

2012-06-01

The aim of this study was to improve fluorescence laparoscopy of pancreatic cancer in an orthotopic mouse model with the use of a light-emitting diode (LED) light source and optimal fluorophore combinations. Human pancreatic cancer models were established with fluorescent FG-RFP, MiaPaca2-GFP, BxPC-3-RFP, and BxPC-3 cancer cells implanted in 6-week-old female athymic mice. Two weeks postimplantation, diagnostic laparoscopy was performed with a Stryker L9000 LED light source or a Stryker X8000 xenon light source 24 hours after tail-vein injection of CEA antibodies conjugated with Alexa 488 or Alexa 555. Cancer lesions were detected and localized under each light mode. Intravital images were also obtained with the OV-100 Olympus and Maestro CRI Small Animal Imaging Systems, serving as a positive control. Tumors were collected for histologic analysis. Fluorescence laparoscopy with a 495-nm emission filter and an LED light source enabled real-time visualization of the fluorescence-labeled tumor deposits in the peritoneal cavity. The simultaneous use of different fluorophores (Alexa 488 and Alexa 555), conjugated to antibodies, brightened the fluorescence signal, enhancing detection of submillimeter lesions without compromising background illumination. Adjustments to the LED light source permitted simultaneous detection of tumor lesions of different fluorescent colors and surrounding structures with minimal autofluorescence. Using an LED light source with adjustments to the red, blue, and green wavelengths, it is possible to simultaneously identify tumor metastases expressing fluorescent proteins of different wavelengths, which greatly enhanced the signal without compromising background illumination. Development of this fluorescence laparoscopy technology for clinical use can improve staging and resection of pancreatic cancer. Copyright © 2012 American College of Surgeons. Published by Elsevier Inc. All rights reserved.

Perspective View with Color-Coded Shaded Relief, Panama Canal

NASA Technical Reports Server (NTRS)

2002-01-01

This perspective view shows the Panama Canal with the Gulf of Panama in the foreground and the Caribbean Sea in the distance. The canal runs northwest-southeast from the city of Colon on the Atlantic side to Panama City on the Pacific side. Water levels are maintained along its length by three reservoirs, the largest of which is Lake Gatun, visible at the right center of the image. Built by the U.S. Army Corps of Engineers between 1904 and 1914, the canal extends for approximately 50 miles, and is widely considered to be one of the world's great engineering achievements.

This shaded relief perspective view was generated using topographic data from the Shuttle Radar Topography Mission (SRTM). A computer-generated artificial light source illuminates the elevation data to produce a pattern of light and shadows. Slopes facing the light appear bright, while those facing away are shaded. On flatter surfaces, the pattern of light and shadows can reveal subtle features in the terrain. Colors show the elevation as measured by SRTM, and range from green at the lowest elevations to white at the highest elevations.

SRTM, launched on February 11, 2000, uses the same radar instrument that comprised the Spaceborne Imaging Radar-C/X-Band Synthetic Aperture Radar (SIR-C/X-SAR) that flew twice on the Space Shuttle Endeavour in 1994. The mission is designed to collect three-dimensional measurements of the Earth's surface. To collect the 3-D data, engineers added a 60-meter-long (200-foot) mast, an additional C-band imaging antenna and improved tracking and navigation devices. The mission is a cooperative project between NASA, the National Imagery and Mapping Agency (NIMA) and the German (DLR) and Italian (ASI) space agencies. It is managed by NASA's Jet Propulsion Laboratory, Pasadena, Calif., for NASA's Earth Science Enterprise, Washington, D.C.

Size: scale varies in this perspective image Location: 9.0 degrees North latitude, 79.8 degrees West longitude Orientation: looking West Original Data Resolution: SRTM 30 meters (99 feet) Date Acquired: February 2000 (SRTM)

Synchrotron light sources in developing countries

DOE PAGES

Mtingwa, Sekazi K.; Winick, Herman

2018-03-21

Here, we discuss the role that synchrotron light sources, such as SESAME, could play in improving the socioeconomic conditions in developing countries. After providing a brief description of a synchrotron light source, we discuss the important role that they played in the development of several economically emerging countries. Then we describe the state of synchrotron science in South Africa and that country’s leadership role in founding the African Light Source initiative. Next, we highlight a new initiative called Lightsources for Africa, the Americas & Middle East Project, which is a global initiative led by the International Union of Pure andmore » Applied Physics and the International Union of Crystallography, with initial funding provided by the International Council for Science. Finally, we comment on a new technology called the multibend achromat that has launched a new paradigm for the design of synchrotron light sources that should be attractive for construction in developing countries.« less

Synchrotron light sources in developing countries

NASA Astrophysics Data System (ADS)

Mtingwa, Sekazi K.; Winick, Herman

2018-03-01

We discuss the role that synchrotron light sources, such as SESAME, could play in improving the socioeconomic conditions in developing countries. After providing a brief description of a synchrotron light source, we discuss the important role that they played in the development of several economically emerging countries. Then we describe the state of synchrotron science in South Africa and that country’s leadership role in founding the African Light Source initiative. Next, we highlight a new initiative called Lightsources for Africa, the Americas & Middle East Project, which is a global initiative led by the International Union of Pure and Applied Physics and the International Union of Crystallography, with initial funding provided by the International Council for Science. Finally, we comment on a new technology called the multibend achromat that has launched a new paradigm for the design of synchrotron light sources that should be attractive for construction in developing countries.

Broadband near-field infrared spectroscopy with a high temperature plasma light source.

PubMed

Lahneman, D J; Huffman, T J; Xu, Peng; Wang, S L; Grogan, T; Qazilbash, M M

2017-08-21

Scattering-type scanning near-field optical microscopy (S-SNOM) has enormous potential as a spectroscopy tool in the infrared spectral range where it can probe phonon resonances and carrier dynamics at the nanometer lengths scales. However, its applicability is limited by the lack of practical and affordable table-top light sources emitting intense broadband infrared radiation in the 100 cm -1 to 2,500 cm -1 spectral range. This paper introduces a high temperature plasma light source that is both ultra-broadband and has much more radiant power in the infrared spectral range than conventional, table-top thermal light sources such as the globar. We implement this plasma lamp in our near-field optical spectroscopy set up and demonstrate its capability as a broadband infrared nano-spectroscopy light source by obtaining near-field infrared amplitude and phase spectra of the phonon resonances of SiO 2 and SrTiO 3 .

Atomic physics research with second and third generation synchrotron light sources

DOE Office of Scientific and Technical Information (OSTI.GOV)

Johnson, B.M.

1990-10-01

This contribution to these proceedings is intended to provide an introduction and overview for other contributions on atomic (and related) physics research at existing and planned synchrotron light sources. The emphasis will be on research accomplishments and future opportunities, but a comparison will be given of operating characteristics for first, second, and third generation machines. First generation light sources were built to do research with the primary electron and positron beams, rather than with the synchrotron radiation itself. Second generation machines were specifically designed to be dedicated synchrotron-radiation facilities, with an emphasis on the use of bending-magnet radiation. The newmore » third generation light sources are being designed to optimize radiation from insertion devices, such as undulators and wigglers. Each generation of synchrotron light source offers useful capabilities for forefront research in atomic physics and many other disciplines. 27 refs., 1 fig., 3 tabs.« less

Alternative light source (polilight) illumination with digital image analysis does not assist in determining the age of bruises.

PubMed

Hughes, V K; Ellis, P S; Langlois, N E I

2006-05-10

The age of a bruise may be of interest to forensic investigators. Previous research has demonstrated that an alternative light source may assist in the visualisation of faint or non-visible bruises. This project aimed to determine if an alternative light source could be utilised to assist investigators estimate the age of a bruise. Forty braises, sustained from blunt force trauma, were examined from 30 healthy subjects. The age of the bruises ranged from 2 to 231 h (mean = 74.6, median = 69.0). Alternative light source (polilight) illumination at 415 and 450 nm was used. The black and white photographs obtained were assessed using densitometry. A statistical analysis indicated that there was no correlation between time and the mean densitometry values. The alternative light source used in this study was unable to assist in determining the age of a bruise.

Synchrotron light sources in developing countries

DOE Office of Scientific and Technical Information (OSTI.GOV)

Mtingwa, Sekazi K.; Winick, Herman

Here, we discuss the role that synchrotron light sources, such as SESAME, could play in improving the socioeconomic conditions in developing countries. After providing a brief description of a synchrotron light source, we discuss the important role that they played in the development of several economically emerging countries. Then we describe the state of synchrotron science in South Africa and that country’s leadership role in founding the African Light Source initiative. Next, we highlight a new initiative called Lightsources for Africa, the Americas & Middle East Project, which is a global initiative led by the International Union of Pure andmore » Applied Physics and the International Union of Crystallography, with initial funding provided by the International Council for Science. Finally, we comment on a new technology called the multibend achromat that has launched a new paradigm for the design of synchrotron light sources that should be attractive for construction in developing countries.« less

Implementation of electronic locking devices for adolescents at German tobacco vending machines: intended and unintended changes of supply and demand.

PubMed

Schneider, S; Meyer, C; Yamamoto, S; Solle, D

2009-08-01

Starting from 1 January 2007, electronic locking devices based on proof-of-age (via electronic cash cards or a European driving licence) were installed in approximately 500,000 vending machines across Germany to restrict the purchase of cigarettes to those over the age of 16. To examine changes in the number of tobacco vending machines before and after the introduction of these new measures. The total number of commercial tobacco sources in 2 selected districts (70,000 inhabitants) in Cologne were recorded and mapped. This major German city was the ideal setting for this study as investigators were able to use existing sociogeographical data from the area. A complete inventory was compiled in autumn 2005 and 2007. A total of 780 students aged 12 to 15 were also interviewed in the study areas. The main outcome measures were quantities and locations of commercial tobacco sources. Between 2005 and 2007 the total number of tobacco sources decreased from 315 to 277 within the study area. Although the most obvious reduction was detected in the number of outdoor vending machines (-48%), the number of indoor vending machines also decreased by 8%. Adolescents changed from vending machines to other sources for cigarettes, particularly kiosks or friends (+31% points usage rate, p<0.001; +35% points usage rate, p<0.001, respectively). Although the number of tobacco vending machines decreased, this has not had a significant impact on cigarette acquisition by underage smokers as they were able to circumvent this new security measure in several different ways.

FULAS: Design and test results of a novel laser platform for future LIDAR missions

NASA Astrophysics Data System (ADS)

Luttmann, Jörg; Klein, Jürgen; Plum, Heinz-Dieter; Hoffmann, Hans-Dieter; Hahn, Sven; Bode, Markus

2017-03-01

Spaceborne atmospheric LIDAR instruments enable the global measurement of aerosols, wind and greenhouse gases like CO2, Methane and Water. These LIDAR instruments require a pulsed single frequency laser source with emission at a specific wavelength. Pulse energies in the 10 mJ or 100 mJ range are required at bandwidth limited pulse durations in the multi-10 ns range. Pulse repetition rate requirements are typically around 100 Hz but may range from 10 Hz to some kHz. High efficiency is mandatory. Building complex laser sources providing the performance, reliability and lifetime necessary to operate such instruments in space has been recognized to be still very challenging. To overcome this, in the frame of the FULAS technology development project - funded by ESA and supported by the German Aerospace Center DLR - a versatile platform for LIDAR sources has been developed. For demonstration the requirements of the laser source in the ATLID instrument have been chosen. The design is based on a single frequency seeded, actively Q-switched, diode pumped Nd:YAG laser oscillator and an InnoSlab power amplifier with frequency tripling. The laser architecture pays special attention on Laser Induced Contamination by avoiding critical organic and outgassing materials. Soldering technologies for mounting and alignment of optics provide high mechanical stability and superior reliability. The FULAS infrared section has been assembled and integrated into a pressurized housing. The optical performance at 1064 nm has been demonstrated and thermal vacuum tests have been carried out successfully providing relevant data for the French-German climate mission MERLIN.

Total radiated power, infrared output, and heat generation by cold light sources at the distal end of endoscopes and fiber optic bundle of light cables.

PubMed

Hensman, C; Hanna, G B; Drew, T; Moseley, H; Cuschieri, A

1998-04-01

Skin burns and ignition of drapes have been reported with the use of cold light sources. The aim of the study was to document the temperature generated by cold light sources and to correlate this with the total radiated power and infrared output. The temperature, total radiated power, and infrared output were measured as a function of time at the end of the endoscope (which is inserted into the operative field) and the end of the fiber optic bundle of the light cable (which connects the cable to the light port of the endoscope) using halogen and xenon light sources. The highest temperature recorded at the end of the endoscope was 95 degrees C. The temperature measured at the optical fiber location of the endoscope was higher than at its lens surface (p < 0.0001). At the end of the fiber optic bundle of light cables, the temperature reached 225 degrees C within 15 s. The temperature recorded at the optical fiber location of all endoscopes and light cables studied rose significantly over a period of 10 min to reach its maximum (p <0.0001) and then leveled off for the duration of the study (30 min). The infrared output accounted only for 10% of the total radiated power. High temperatures are reached by 10 min at the end of fiber optic bundle of light cables and endoscopes with both halogen and xenon light sources. This heat generation is largely due to the radiated power in the visible light spectrum.

Needs of a Science Editor

NASA Astrophysics Data System (ADS)

Dreissigacker, O.

2005-12-01

None of the classic media sources report in greater depth about this science discipline than monthly astronomy magazines. They may not reach the widest audience, but their readers are 100% interested in astronomy, astrophysics and spaceflight, so the targeting is perfect! This article provides some insight into the production and selection process using examples from ASTRONOMIE HEUTE (AH), the German edition of Sky & Telescope (S&T).

The Portuguese in the United States: A Bibliography. First Edition. Bibliographies and Documents Series.

ERIC Educational Resources Information Center

Pap, Leo

The bibliography is a nearly exhaustive listing of books and articles in American libraries which make some explicit reference to the Portuguese in the United States. The 800 entries, citing sources published during the 20th century, are mainly written in English or Portuguese, although a few are in German, French, and Spanish. Coverage extends…

Towards Combining Active and Passive Greenhouse Gas Remote Sensing from Space: Progress and Plans at the German Aerospace Center

NASA Astrophysics Data System (ADS)

Rapp, M.; Ehret, G.; Fix, A.; Wirth, M.; Amediek, A.; Kiemle, C.; Quatrevalet, M.; Butz, A.; Roiger, A.; Joeckel, P.

2017-12-01

For meeting the goals of the Paris agreement it is highly desirable to obtain objective global information on anthropogenic greenhouse gas emission rates. A promising approach for a space based observation system is the combination of active and passive remote sensing from satellites in Low Earth Orbit (LEO). While LIDAR techniques have the potential to yield low bias observations which are independent of solar illumination and hence also work during night and at polar winter latitudes, spectroscopic observations of scattered sunlight are suitable for imaging atmospheric concentrations at high spatial resolution. This presentation reviews progress and plans of work conducted at the German Aerospace Center (DLR). Regarding active remote sensing, DLR has developed the airborne Integrated Path Differential Absorption (IPDA)-Lidar CHARM-F (CO2 and CH4 Remote Monitoring—Flugzeug) for the quantification of carbon dioxide and methane column mixing ratios. CHARM-F has been deployed in an initial airborne field campaign in spring 2015 and results of strong anthropogenic sources detected during these flights will be presented. In addition, DLR is in the process of preparing an international airborne campaign (CoMet - Carbon Dioxide and Methane Mission for HALO) for April 2018 which will be supported by various in-situ, ground based, and modelling activities. These airborne field campaigns are important steps towards the German-French satellite mission MERLIN which also utilizes an IPDA-LIDAR. Also, DLR has started to further investigate concepts for a future space borne IPDA-Lidar for the quantification of strong anthropogenic CO2 point sources. Jointly with the latter, DLR is currently further studying the concept of a passive spectrometer for the observation of CO2 point emissions.

Surplus from and storage of electricity generated by intermittent sources

NASA Astrophysics Data System (ADS)

Wagner, Friedrich

2016-12-01

Data from the German electricity system for the years 2010, 2012, 2013, and 2015 are used and scaled up to a 100% supply by intermittent renewable energy sources (iRES). In the average, 330GW wind and PV power are required to meet this 100% target. A back-up system is necessary with the power of 89% of peak load. Surplus electricity accrues at high power levels. Curtailing surplus power to a large extent is found to be uneconomic. Demand-side management will suffer from the strong day-to-day variation of available surplus energy. A day storage is ineffective because of the day-night correlation of surplus power during winter. A seasonal storage loses its character when transformation losses are considered because it can contribute only after periods with excessive surplus production. The option of an oversized iRES system to feed the storage is also not effective because, in this case, energy can be taken directly from the large iRES supply, making storage superfluous. The capacities to be installed stress the difficulty to base heat supply and mobility also on iRES generated electricity in the future. As the German energy transition replaces one CO2-free electricity supply system by another one, no major reduction in CO2 emission can be expected till 2022, when the last nuclear reactor will be switched off. By 2022, an extremely oversized power supply system has to be created, which can be expected to continue running down spot-market electricity prices. The continuation of the economic response -to replace expensive gas fuel by cheap lignite- causes an overall increase in CO2 emission. The German GHG emission targets for 2020 and beyond are therefore in jeopardy.

Apparatus and method for measuring the thickness of a semiconductor wafer

DOEpatents

Ciszek, Theodoer F.

1995-01-01

Apparatus for measuring thicknesses of semiconductor wafers, comprising: housing means for supporting a wafer in a light-tight environment; a light source mounted to the housing at one side of the wafer to emit light of a predetermined wavelength to normally impinge the wafer; a light detector supported at a predetermined distance from a side of the wafer opposite the side on which a light source impinges and adapted to receive light transmitted through the wafer; and means for measuring the transmitted light.

Long Wavelength Electromagnetic Light Bullets Generated by a 10.6 micron CO2 Ultrashort Pulsed Source

DTIC Science & Technology

2016-11-29

AFRL-AFOSR-VA-TR-2016-0365 Long Wavelength Electromagnetic Light Bullets Generated by a 10.6 micron CO2 Ultrashort Pulsed Source Jerome Moloney...SUBTITLE "Long Wavelength Electromagnetic Light Bullets Generated by a 10.6 micron CO2 Ultrashort Pulsed Source 5a. CONTRACT NUMBER FA9550-15-1-0272 5b...afosr.reports.sgizmo.com/s3/> Subject: Final Report to Dr. Arje Nachman Contract/Grant Title: Long Wavelength Electromagnetic Light Bullets Generated by a 10.6

Energy-saving quality road lighting with colloidal quantum dot nanophosphors

NASA Astrophysics Data System (ADS)

Erdem, Talha; Kelestemur, Yusuf; Soran-Erdem, Zeliha; Ji, Yun; Demir, Hilmi Volkan

2014-12-01

Here the first photometric study of road-lighting white light-emitting diodes (WLEDs) integrated with semiconductor colloidal quantum dots (QDs) is reported enabling higher luminance than conventional light sources, specifically in mesopic vision regimes essential to street lighting. Investigating over 100 million designs uncovers that quality road-lighting QD-WLEDs, with a color quality scale and color rendering index ≥85, enables 13-35% higher mesopic luminance than the sources commonly used in street lighting. Furthermore, these QD-WLEDs were shown to be electrically more efficient than conventional sources with power conversion efficiencies ≥16-29%. Considering this fact, an experimental proof-of-concept QD-WLED was demonstrated, which is the first account of QD based color conversion custom designed for street lighting applications. The obtained white LED achieved the targeted mesopic luminance levels in accordance with the road lighting standards of the USA and the UK. These results indicate that road-lighting QD-WLEDs are strongly promising for energy-saving quality road lighting.

Optically pulsed electron accelerator

DOEpatents

Fraser, John S.; Sheffield, Richard L.

1987-01-01

An optically pulsed electron accelerator can be used as an injector for a free electron laser and comprises a pulsed light source, such as a laser, for providing discrete incident light pulses. A photoemissive electron source emits electron bursts having the same duration as the incident light pulses when impinged upon by same. The photoemissive electron source is located on an inside wall of a radio frequency powered accelerator cell which accelerates the electron burst emitted by the photoemissive electron source.

Optically pulsed electron accelerator

DOEpatents

Fraser, J.S.; Sheffield, R.L.

1985-05-20

An optically pulsed electron accelerator can be used as an injector for a free electron laser and comprises a pulsed light source, such as a laser, for providing discrete incident light pulses. A photoemissive electron source emits electron bursts having the same duration as the incident light pulses when impinged upon by same. The photoemissive electron source is located on an inside wall of a radiofrequency-powered accelerator cell which accelerates the electron burst emitted by the photoemissive electron source.

Low Power Switching for Antenna Reconfiguration

NASA Technical Reports Server (NTRS)

Bauhahn, Paul E. (Inventor); Becker, Robert C. (Inventor); Meyers, David W. (Inventor); Muldoon, Kelly P. (Inventor)

2008-01-01

Methods and systems for low power switching are provided. In one embodiment, an optical switching system is provided. The system comprises at least one optically controlled switch adapted to maintain one of an open state and a closed state based on an associated light signal; and at least one light source adapted to output the associated light signal to the at least one switch, wherein the at least one light source cycles the light signal on and off, wherein the at least one light source is cycled on for a sufficient duration of time and with a sufficient periodicity to maintain the optically controlled switch in one of an open state and a closed state.

Low-energy light bulbs, computers, tablets and the blue light hazard

PubMed Central

O'Hagan, J B; Khazova, M; Price, L L A

2016-01-01

The introduction of low energy lighting and the widespread use of computer and mobile technologies have changed the exposure of human eyes to light. Occasional claims that the light sources with emissions containing blue light may cause eye damage raise concerns in the media. The aim of the study was to determine if it was appropriate to issue advice on the public health concerns. A number of sources were assessed and the exposure conditions were compared with international exposure limits, and the exposure likely to be received from staring at a blue sky. None of the sources assessed approached the exposure limits, even for extended viewing times. PMID:26768920

A non-laser light source for photodynamic therapy: in vitro effects on normal and malignant cells.

PubMed

Kashtan, Hanoch; Haddad, Riad; Greenberg, Ron; Skornick, Yehuda; Kaplan, Ofer

2002-01-01

Photodynamic therapy (PDT) involves the use of photosensitizing drugs combined with light to treat tumors. Laser systems, the current source of light for PDT, have several inherent drawbacks: the spectrum is essentially monochromatic which may be problematic for second generation photosensitizers, the systems are bulky and nearly impossible to move between hospital locations and require complicated electrical and cooling installations, the cost of a typical system is enormous, and its maintenance and operation require highly trained personnel. We now introduce a new non-laser light system, Versa-Light, which appears to work as effectively and has none of the above drawbacks. A series of in vitro studies were performed using various murine and human normal and cancer cells which underwent PDT using aluminum phthalocyanine (AlPcS4) as a photosensitizer and Versa-Light as the light source. PDT of cancer cells at light energy levels of 50, 100 and 200 j/cm2 significantly decreased cell viability. PDT also decreased cell viability of normal murine splenocytes and normal human lymphocytes, but to a lesser extent. The observed significant hyperthermia was light dose-dependent. We believe that Versa-Light can replace laser systems as an enhanced light source for PDT. Further in vitro and pre-clinical studies are in progress.

Scanning computed confocal imager

DOEpatents

George, John S.

2000-03-14

There is provided a confocal imager comprising a light source emitting a light, with a light modulator in optical communication with the light source for varying the spatial and temporal pattern of the light. A beam splitter receives the scanned light and direct the scanned light onto a target and pass light reflected from the target to a video capturing device for receiving the reflected light and transferring a digital image of the reflected light to a computer for creating a virtual aperture and outputting the digital image. In a transmissive mode of operation the invention omits the beam splitter means and captures light passed through the target.

A novel method for detecting light source for digital images forensic

NASA Astrophysics Data System (ADS)

Roy, A. K.; Mitra, S. K.; Agrawal, R.

2011-06-01

Manipulation in image has been in practice since centuries. These manipulated images are intended to alter facts — facts of ethics, morality, politics, sex, celebrity or chaos. Image forensic science is used to detect these manipulations in a digital image. There are several standard ways to analyze an image for manipulation. Each one has some limitation. Also very rarely any method tried to capitalize on the way image was taken by the camera. We propose a new method that is based on light and its shade as light and shade are the fundamental input resources that may carry all the information of the image. The proposed method measures the direction of light source and uses the light based technique for identification of any intentional partial manipulation in the said digital image. The method is tested for known manipulated images to correctly identify the light sources. The light source of an image is measured in terms of angle. The experimental results show the robustness of the methodology.

Mapping algorithm for freeform construction using non-ideal light sources

NASA Astrophysics Data System (ADS)

Li, Chen; Michaelis, D.; Schreiber, P.; Dick, L.; Bräuer, A.

2015-09-01

Using conventional mapping algorithms for the construction of illumination freeform optics' arbitrary target pattern can be obtained for idealized sources, e.g. collimated light or point sources. Each freeform surface element generates an image point at the target and the light intensity of an image point is corresponding to the area of the freeform surface element who generates the image point. For sources with a pronounced extension and ray divergence, e.g. an LED with a small source-freeform-distance, the image points are blurred and the blurred patterns might be different between different points. Besides, due to Fresnel losses and vignetting, the relationship between light intensity of image points and area of freeform surface elements becomes complicated. These individual light distributions of each freeform element are taken into account in a mapping algorithm. To this end the method of steepest decent procedures are used to adapt the mapping goal. A structured target pattern for a optics system with an ideal source is computed applying corresponding linear optimization matrices. Special weighting factor and smoothing factor are included in the procedures to achieve certain edge conditions and to ensure the manufacturability of the freefrom surface. The corresponding linear optimization matrices, which are the lighting distribution patterns of each of the freeform surface elements, are gained by conventional raytracing with a realistic source. Nontrivial source geometries, like LED-irregularities due to bonding or source fine structures, and a complex ray divergence behavior can be easily considered. Additionally, Fresnel losses, vignetting and even stray light are taken into account. After optimization iterations, with a realistic source, the initial mapping goal can be achieved by the optics system providing a structured target pattern with an ideal source. The algorithm is applied to several design examples. A few simple tasks are presented to discussed the ability and limitation of the this mothed. It is also presented that a homogeneous LED-illumination system design, in where, with a strongly tilted incident direction, a homogeneous distribution is achieved with a rather compact optics system and short working distance applying a relatively large LED source. It is shown that the lighting distribution patterns from the freeform surface elements can be significantly different from the others. The generation of a structured target pattern, applying weighting factor and smoothing factor, are discussed. Finally, freeform designs for much more complex sources like clusters of LED-sources are presented.

Lighting system combining daylight concentrators and an artificial source

DOEpatents

Bornstein, Jonathan G.; Friedman, Peter S.

1985-01-01

A combined lighting system for a building interior includes a stack of luminescent solar concentrators (LSC), an optical conduit made of preferably optical fibers for transmitting daylight from the LSC stack, a collimating lens set at an angle, a fixture for receiving the daylight at one end and for distributing the daylight as illumination inside the building, an artificial light source at the other end of the fixture for directing artifical light into the fixture for distribution as illumination inside the building, an automatic dimmer/brightener for the artificial light source, and a daylight sensor positioned near to the LSC stack for controlling the automatic dimmer/brightener in response to the daylight sensed. The system also has a reflector positioned behind the artificial light source and a fan for exhausting heated air out of the fixture during summer and for forcing heated air into the fixture for passage into the building interior during winter.

Effect of Microstructure on the Radioluminescence and Transparency of Ce-Doped Strontium Hafnate Ceramics

PubMed Central

van Loef, Edgar V.; Wang, Yimin; Miller, Stuart R.; Brecher, Charles; Rhodes, William H.; Baldoni, Gary; Topping, Stephen; Lingertat, Helmut; Sarin, Vinod K.; Shah, Kanai S.

2011-01-01

In this paper we report on the fabrication and characterization of SrHfO3:Ce ceramics. Powders were prepared by solid-state synthesis using metal oxides and carbonates. X-ray diffraction measurements showed that phase-pure SrHfO3 is formed at 1200°C. Inductively coupled plasma spectroscopy confirmed the purity and composition of each batch. SrHfO3 exhibits several phase changes in the solid, but this does not appear to be detrimental to the ceramics. Microprobe experiments showed uniform elemental grain composition, whereas aluminum added as charge compensation for trivalent cerium congregated at grain boundaries and triple points. Radioluminescence spectra revealed that the light yield decreases when the concentration of excess Sr increases. The decrease in the light yield may be related to the change of Ce3+ into Ce4+ ions. For stoichiometric SrHfO3:Ce, the light yield is about four times that of bismuth germanate (BGO), the conventional benchmark, indicating great potential for many scintillator applications. PMID:21339835

Categorizing with gender: does implicit grammatical gender affect semantic processing in 24-month-old toddlers?

PubMed

Bobb, Susan C; Mani, Nivedita

2013-06-01

The current study investigated the interaction of implicit grammatical gender and semantic category knowledge during object identification. German-learning toddlers (24-month-olds) were presented with picture pairs and heard a noun (without a preceding article) labeling one of the pictures. Labels for target and distracter images either matched or mismatched in grammatical gender and either matched or mismatched in semantic category. When target and distracter overlapped in both semantic and gender information, target recognition was impaired compared with when target and distracter overlapped on only one dimension. Results suggest that by 24 months of age, German-learning toddlers are already forming not only semantic but also grammatical gender categories and that these sources of information are activated, and interact, during object identification. Copyright © 2013 Elsevier Inc. All rights reserved.

40 CFR 63.2480 - What requirements must I meet for equipment leaks?

Code of Federal Regulations, 2011 CFR

2011-07-01

... affected source. (5) For pumps in light liquid service in an MCPU that has no continuous process vents and.../vapor and light liquid service at an existing source, you may elect to comply with the requirements in... light liquid service in an MCPU that has no continuous process vents and is part of an existing source...

Light sources based on semiconductor current filaments

DOEpatents

Zutavern, Fred J.; Loubriel, Guillermo M.; Buttram, Malcolm T.; Mar, Alan; Helgeson, Wesley D.; O'Malley, Martin W.; Hjalmarson, Harold P.; Baca, Albert G.; Chow, Weng W.; Vawter, G. Allen

2003-01-01

The present invention provides a new type of semiconductor light source that can produce a high peak power output and is not injection, e-beam, or optically pumped. The present invention is capable of producing high quality coherent or incoherent optical emission. The present invention is based on current filaments, unlike conventional semiconductor lasers that are based on p-n junctions. The present invention provides a light source formed by an electron-hole plasma inside a current filament. The electron-hole plasma can be several hundred microns in diameter and several centimeters long. A current filament can be initiated optically or with an e-beam, but can be pumped electrically across a large insulating region. A current filament can be produced in high gain photoconductive semiconductor switches. The light source provided by the present invention has a potentially large volume and therefore a potentially large energy per pulse or peak power available from a single (coherent) semiconductor laser. Like other semiconductor lasers, these light sources will emit radiation at the wavelength near the bandgap energy (for GaAs 875 nm or near infra red). Immediate potential applications of the present invention include high energy, short pulse, compact, low cost lasers and other incoherent light sources.

Efficient measurement of large light source near-field color and luminance distributions for optical design and simulation

NASA Astrophysics Data System (ADS)

Kostal, Hubert; Kreysar, Douglas; Rykowski, Ronald

2009-08-01

The color and luminance distributions of large light sources are difficult to measure because of the size of the source and the physical space required for the measurement. We describe a method for the measurement of large light sources in a limited space that efficiently overcomes the physical limitations of traditional far-field measurement techniques. This method uses a calibrated, high dynamic range imaging colorimeter and a goniometric system to move the light source through an automated measurement sequence in the imaging colorimeter's field-of-view. The measurement is performed from within the near-field of the light source, enabling a compact measurement set-up. This method generates a detailed near-field color and luminance distribution model that can be directly converted to ray sets for optical design and that can be extrapolated to far-field distributions for illumination design. The measurements obtained show excellent correlation to traditional imaging colorimeter and photogoniometer measurement methods. The near-field goniometer approach that we describe is broadly applicable to general lighting systems, can be deployed in a compact laboratory space, and provides full near-field data for optical design and simulation.

Imaging System and Method for Biomedical Analysis

DTIC Science & Technology

2013-03-11

biological particles and items of interest. Broadly, Padmanabhan et al. utilize the diffraction of a laser light source in flow cytometry to count...spread of light from multiple LED devices over the entire sample surface. Preferably, light source 308 projects a full spectrum white light. Light...for example, red blood cells, white blood cells (which may include lymphocytes which are relatively large and easily detectable), T-helper cells

Single-mode light source fabrication based on colloidal quantum dots

NASA Astrophysics Data System (ADS)

Xu, Jianfeng; Chen, Bing; Baig, Sarfaraz; Wang, Michael R.

2009-02-01

There are huge market demands for innovative, cheap and efficient light sources, including light emitting devices, such as LEDs and lasers. However, the light source development in the visible spectral range encounters significant difficulties these years. The available visible wavelength LEDs or lasers are few, large and expensive. The main challenge lies at the lack of efficient light media. Semiconductor nanocrystal quantum dots (QDs) have recently commanded considerable attention. As a result of quantum confinement effect, the emission color of these QDs covers the whole visible spectral range and can be modified dramatically by simply changing their size. Such spectral tunability, together with large photoluminescence quantum yield and photostability, make QDs attractive for potential applications in a variety of light emitting technologies. However, there are still several technical problems that hinder their application as light sources. One main issue is how to fabricate these QDs into a solid state device while still retaining their original optical emission properties. A vacuum assisted micro-fluidic fabrication of guided wave devices has demonstrated low waveguide propagation loss, lower crosstalk, and improved waveguide structures. We report herein the combination of the excellent emission properties of QDs and novel vacuum assisted micro-fluidic photonic structure fabrication technique to realize single-mode efficient light sources.

Effects of light sources and intensity on broilers grown to heavy weights: Hematophysiological and biochemical assessment.

USDA-ARS?s Scientific Manuscript database

Most governments around the world including the USA have passed measures to phase out incandescent light bulbs in favor of more energy-efficient lighting alternatives. Research is limited on blood physiological variables of broilers grown to heavy weights (> 3 kg) under these new light sources to en...

Evaluation of the growth of the bursa of fabricius in broilers reared under different light photoperiods

USDA-ARS?s Scientific Manuscript database

Previous studies have investigated the interaction of different light sources and light intensity. Studies are lacking concerning the effect of different light sources and photoperiods on broiler growth and health. The results reported here are a part of a larger study to evaluate the interaction of...

Comparison of Depth of Cure, Hardness and Heat Generation of LED and High Intensity QTH Light Sources.

PubMed

Mousavinasab, Sayed Mostafa; Meyers, Ian

2011-07-01

To compare curing performance of a second generation LED curing light with a high power tungsten quartz halogen (QTH). A hybrid composite resin (Filtek Z 250, 3M, USA) was used as test material and cured using a second generation LED light (Translux Power Blue™, Heraus Kulzer ,Germany) or a very high power QTH light unit (EMS, Switzerland). A two split aluminum mold was used to prepare ten samples with LED light source cured for forty seconds and ten samples prepared using high power QTH light unit, cured for four or six seconds recommended exposure time. Hardness, depth of cure (DOC) and thermal rise during exposure time by these light sources were measured. The data submitted to analysis of variance (ANOVA), Tukey's and student's t tests at 5% significance level. Significant differences were found in hardness, DOC of samples cured by above mentioned light sources and also in thermal rises during exposure time. The curing performance of the tested QTH was not as well as the LED light. TPB light source produced the maximum hardness (81.25, 73.29, 65.49,55.83 and 24.53 for 0 mm, 1 mm, 2 mm, 3 mm and 4 mm intervals) and DOC (2.64 mm) values with forty seconds irradiation time and the high power (QTH) the least hardness (73.27, 61.51 and 31.59 for 0 mm, 1 mm and 2 mm, respectively) and DOC (2 mm) values with four seconds irradiation time. Thermal rises during 4 s and 6 s curing time using high power QTH and tested LED were 1.88°C, 3°C and 1.87°C, respectively. The used high power LED light produced greater hardness and depth of cure during forty seconds exposure time compared to high power QTH light with four or six seconds curing time. Thermal rise during 6 s curing time with QTH was greater compared to thermal changes occurred during 40 s curing time with tested LED light source. There was no difference seen in thermal changes caused by LED light with 40 s and QTH light with 4 s exposure time.

Effect of UV irradiation on the apoptosis and necrosis of Jurkat cells using UV LEDs

NASA Astrophysics Data System (ADS)

Inada, Shunko A.; Amano, Hiroshi; Akasaki, Isamu; Morita, Akimichi; Kobayashi, Keiko

2009-02-01

Phototherapy is a very effective method for treating most of the incurable skin diseases. A fluorescent light bulb is used as a conventional UV light source for this type of therapy. However, infrared radiation from the light source sometimes causes serious problems on patient's health. In addition, the normal part of the skin is irradiated when a large fluorescent light bulb is used. Moreover, a conventional UV irradiation system is heavy and has a short lifetime and a high electrical power consumption. Therefore, a new UV light source for solving the problems of phototherapy is required. To realize low-power-consumption, lightweight and long-lifetime systems, group III nitride-based UV-A1 light-emitting diodes (LEDs) were investigated. We examined the UV LED irradiation of Jurkat cell, which is a tumor cell and more sensitive to UV light than a healthy cell. The numbers of apoptotic and necrotic cells were confirmed to be the same using a UV LED and a conventional lamp system. The UV LED showed the possibility of realizing a new UV light source for phototherapy.

Effects of type of light on mouse circadian behaviour and stress levels.

PubMed

Alves-Simoes, Marta; Coleman, Georgia; Canal, Maria Mercè

2016-02-01

Light is the principal synchronizing environmental factor for the biological clock. Light quantity (intensity), and light quality (type of light source) can have different effects. The aim of this study was to determine the effects of the type of light experienced from the time of birth on mouse growth, circadian behaviour and stress levels. We raised pigmented and albino mice under 24 h light-dark cycles of either fluorescent or white light-emitting diode (LED) light source during the suckling stage, and the animals were then exposed to various light environments after weaning and their growth rate, locomotor activity and plasma corticosterone concentration were measured. We found that the type of light the animals were exposed to did not affect the animals' growth rates or stress levels. However, we observed significant effects on the expression of the locomotor activity rhythm under low contrast light-dark cycles in pigmented mice, and under constant light in both albino and pigmented mice. These results highlight the importance of environmental light quality (light source) on circadian behavioural rhythms, and the need for close monitoring of light environments in animal facilities. © The Author(s) 2015.

Pulp Chamber Heating: An In Vitro Study Evaluating Different Light Sources and Resin Composite Layers.

PubMed

Andreatta, Lígia Maria Lima; Furuse, Adilson Yoshio; Prakki, Anuradha; Bombonatti, Juliana Fraga Soares; Mondelli, Rafael Francisco Lia

2016-01-01

The aim of the present in vitro study was to evaluate the temperature variation inside the pulp chamber during light-activation of the adhesive and resin composite layers with different light sources. Cavities measuring 8x10 mm were prepared on the buccal surface of bovine incisors, leaving a remaining dentin thickness of 1 mm. Specimens were placed in a 37±1 °C water bath to standardize the temperature. The temperature in the pulp chamber was measured every 10 s during 40 s of light activation of the adhesive system (SBMP-3M/ESPE) and in the three consecutive 1-mm-thick layers of resin composite (Z250-3M/ESPE). Three light source devices were evaluated: Elipar 2500 (QTH), LD Max (LED low irradiance) and VALO (LED high irradiance). The results were submitted to one-way ANOVA with repeated measures and Tukey's test, both with p<0.001. The exothermic reaction warming was observed in the Z250 increments, but not in the SBMP. The high irradiance LED showed a higher temperature average (42.7±1.56 °C), followed by the quartz-tungsten-halogen light (40.6±0.67 °C) and the lower irradiance LED (37.8±0.12 °C). Higher temperature increases were observed with the adhesive and the first resin composite increment light-activation, regardless of the employed light source. From the second increment of Z250, the restorative material acted as a dispersive structure of heat, reducing temperature increases. Regardless the light source and restorative step, the temperature increased with the irradiation time. It may be concluded that the light source, irradiation time and resin composite thickness interfered in the temperature variation inside the pulp chamber.

Near-field photometry for organic light-emitting diodes

NASA Astrophysics Data System (ADS)

Li, Rui; Harikumar, Krishnan; Isphording, Alexandar; Venkataramanan, Venkat

2013-03-01

Organic Light Emitting Diode (OLED) technology is rapidly maturing to be ready for next generation of light source for general lighting. The current standard test methods for solid state lighting have evolved for semiconductor sources, with point-like emission characteristics. However, OLED devices are extended surface emitters, where spatial uniformity and angular variation of brightness and colour are important. This necessitates advanced test methods to obtain meaningful data for fundamental understanding, lighting product development and deployment. In this work, a near field imaging goniophotometer was used to characterize lighting-class white OLED devices, where luminance and colour information of the pixels on the light sources were measured at a near field distance for various angles. Analysis was performed to obtain angle dependent luminous intensity, CIE chromaticity coordinates and correlated colour temperature (CCT) in the far field. Furthermore, a complete ray set with chromaticity information was generated, so that illuminance at any distance and angle from the light source can be determined. The generated ray set is needed for optical modeling and design of OLED luminaires. Our results show that luminance non-uniformity could potentially affect the luminaire aesthetics and CCT can vary with angle by more than 2000K. This leads to the same source being perceived as warm or cool depending on the viewing angle. As OLEDs are becoming commercially available, this could be a major challenge for lighting designers. Near field measurement can provide detailed specifications and quantitative comparison between OLED products for performance improvement.

Light source distribution and scattering phase function influence light transport in diffuse multi-layered media

NASA Astrophysics Data System (ADS)

Vaudelle, Fabrice; L'Huillier, Jean-Pierre; Askoura, Mohamed Lamine

2017-06-01

Red and near-Infrared light is often used as a useful diagnostic and imaging probe for highly scattering media such as biological tissues, fruits and vegetables. Part of diffusively reflected light gives interesting information related to the tissue subsurface, whereas light recorded at further distances may probe deeper into the interrogated turbid tissues. However, modelling diffusive events occurring at short source-detector distances requires to consider both the distribution of the light sources and the scattering phase functions. In this report, a modified Monte Carlo model is used to compute light transport in curved and multi-layered tissue samples which are covered with a thin and highly diffusing tissue layer. Different light source distributions (ballistic, diffuse or Lambertian) are tested with specific scattering phase functions (modified or not modified Henyey-Greenstein, Gegenbauer and Mie) to compute the amount of backscattered and transmitted light in apple and human skin structures. Comparisons between simulation results and experiments carried out with a multispectral imaging setup confirm the soundness of the theoretical strategy and may explain the role of the skin on light transport in whole and half-cut apples. Other computational results show that a Lambertian source distribution combined with a Henyey-Greenstein phase function provides a higher photon density in the stratum corneum than in the upper dermis layer. Furthermore, it is also shown that the scattering phase function may affect the shape and the magnitude of the Bidirectional Reflectance Distribution (BRDF) exhibited at the skin surface.

Marlene Dietrich in the German Classroom: A German Film Project--Humanities through the Golden Age of German Cinema.

ERIC Educational Resources Information Center

Flippo, Hyde

1993-01-01

Marlene Dietrich and other classic performers of German cinema can serve to open up a whole new realm for students of German, at secondary and postsecondary levels. By researching and viewing German and American film classics, students have opportunity to learn more about German language and an important element of German culture that has had…

The utilization of nonthermal blue (405-425 nm) and near infrared (850-890 nm) light in aesthetic dermatology and surgery-a multicenter study.

PubMed

Lask, Gary; Fournier, Nathalie; Trelles, Mario; Elman, Monica; Scheflan, Michael; Slatkine, Michael; Naimark, Jenny; Harth, Yoram

2005-12-01

A major cause of skin aging is a chronic micro-inflammation triggered by UV radiation and external pollutants. It has been demonstrated that blue light diminishes inflammatory conditions and near infrared light enhances circulation. To assess the effectiveness of a non thermal dual wavelength -- blue (405 - 420 nm) and near infrared (850 - 900 nm) -- light source in skin rejuvenation, in the reduction of the duration of post skin resurfacing erythema and in the acceleration of healing of post surgical conditions (face lift and breast augmentation). We have utilized a non contact, hand free dual wavelength light source (iClearXL and Clear100XL, Curelight Ltd) to treat over 60 patients and perform three controlled studies in four centers. Follow up duration was three months. Control group for photo-rejuvenation consisted of patients treated with Glycolic peeling and daily appliance of vitamin C Control group for post skin resurfacing erythema duration consisted of patients untreated by the light source and control group for post surgical healing consisted of patients untreated by the light source or treated by the light source on one side only. Post skin resurfacing erythema duration is reduced by 90%. The healing of post surgical conditions is substantially accelerated and discomfort is reduced. The anti aging effect of the light source includes: reduction of pore size in 90% of patients with stable results at three months follow up, enhanced skin radiance in 90% of patients with stable results at three months follow up and smoothing of fine wrinkles in 45% of patients with stable results at three months follow up. The control group showed poor results which were stable for a duration of less than one month. A non thermal, non contact / hand free light source emitting at 405-420 nm and 850-900 nm considerably enhances aesthetic and surgical aesthetic procedures without consuming user time.

Lighting system with thermal management system having point contact synthetic jets

DOEpatents

Arik, Mehmet; Weaver, Stanton Earl; Kuenzler, Glenn Howard; Wolfe, Jr., Charles Franklin; Sharma, Rajdeep

2013-12-10

Lighting system having unique configurations are provided. For instance, the lighting system may include a light source, a thermal management system and driver electronics, each contained within a housing structure. The light source is configured to provide illumination visible through an opening in the housing structure. The thermal management system includes a plurality of synthetic jets. The synthetic jets are arranged within the lighting system such that they are secured at contact points.

Lighting system with thermal management system having point contact synthetic jets

DOEpatents

Arik, Mehmet; Weaver, Stanton Earl; Kuenzler, Glenn Howard; Wolfe, Jr, Charles Franklin; Sharma, Rajdeep

2016-08-30

Lighting systems having unique configurations are provided. For instance, the lighting system may include a light source, a thermal management system and driver electronics, each contained within a housing structure. The light source is configured to provide illumination visible through an opening in the housing structure. The thermal management system includes a plurality of synthetic jets. The synthetic jets are arranged within the lighting system such that they are secured at contact points.

Lighting system with thermal management system having point contact synthetic jets

DOEpatents

Arik, Mehmet; Weaver, Stanton Earl; Kuenzler, Glenn Howard; Wolfe, Jr., Charles Franklin; Sharma, Rajdeep

2016-08-23

Lighting systems having unique configurations are provided. For instance, the lighting system may include a light source, a thermal management system and driver electronics, each contained within a housing structure. The light source is configured to provide illumination visible through an opening in the housing structure. The thermal management system includes a plurality of synthetic jets. The synthetic jets are arranged within the lighting system such that they are secured at contact points.

Performance of light sources and radiation sensors under low gravity realized by parabolic airplane flights

NASA Astrophysics Data System (ADS)

Hirai, Hiroaki; Kitaya, Yoshiaki; Hirai, Takehiro

A fundamental study was conducted to establish an experimental system for space farming. Since to ensure optimal light for plant cultivation in space is of grave importance, this study examined the performance of light sources and radiation sensors under microgravity conditions created during the parabolic airplane flight. Three kinds of light sources, a halogen bulb, a fluorescent tube, and blue and red LEDs, and ten models of radiation sensors available in the market were used for the experiment. Surface temperature of the light sources, output signals from the radiation sensors, spectroscopic characteristics were measured at the gravity levels of 0.01, 1.0 and 1.8 G for 20 seconds each during parabolic airplane flights. As a result, the performance of the halogen lamp was affected the most by the gravity level among the three light sources. Under the microgravity conditions which do not raise heat convection, the temperature of the halogen lamp rose and the output of the radiation sensors increased. Spectral distributions of the halogen lamp indicated that peak wavelength appeared the highest at the level of 0.01G, which contributed to the increase in light intensity. In the case of red and blue LEDs, which are promising light sources in space farming, the temperature of both LED chips rose but irradiance from red LED increased and that from blue LED decreased under microgravity conditions due to the different thermal characteristics.

Bismuth germanate coupled to near ultraviolet silicon photomultipliers for time-of-flight PET

PubMed Central

Kwon, Sun Il; Gola, Alberto; Ferri, Alessandro; Piemonte, Claudio; Cherry, Simon R.

2016-01-01

Bismuth germanate (BGO) was a very attractive scintillator in early-generation positron emission tomography (PET) scanners. However, the major disadvantages of BGO are lower light yield and longer rise and decay time compared to currently popular scintillators such as LSO and LYSO. This results in poorer coincidence timing resolution and it has generally been assumed that BGO is not a suitable scintillator for time-of-flight (TOF) PET applications. However, when a 511-keV photon interacts in a scintillator, a number of Cerenkov photons are produced promptly by energetic electrons released by photoelectric or Compton interactions. If these prompt photons can be captured, they could provide a better timing trigger for PET. Since BGO has a high refractive index (increasing the Cerenkov light yield) and excellent optical transparency down to 320 nm (Cerenkov light yield is higher at shorter wavelengths), we hypothesized that the coincidence timing resolution of BGO can be significantly improved by efficient detection of the Cerenkov photons. However, since the number of Cerenkov photons is far less than the number of scintillation photons, and they are more abundant in the UV and blue part of the spectrum, photosensors need to have high UV/blue sensitivity, fast temporal response, and very low noise in order to trigger on the faint Cerenkov signal. In this respect, NUV-HD silicon photomultipliers (SiPMs) (FBK, Trento, Italy) are an excellent fit for our approach. In this study, coincidence events were measured using BGO crystals coupled with NUV-HD SiPMs. The existence and influence of Cerenkov photons on the timing measurements were studied using different configurations to exploit the directionality of the Cerenkov emissions. Coincidence resolving time values (FWHM) of ~270 ps from 2 × 3 × 2 mm3 BGO crystals and ~560 ps from 3 × 3 × 20 mm3 BGO crystals were obtained. To our knowledge, these are the best coincidence resolving time values reported for BGO to date. With these values, BGO can be considered as a relevant scintillator for TOF PET scanners, especially if photodetectors with even better near UV/blue response can be developed to further improve the efficiency of Cerenkov light detection. PMID:27589153

Transversely polarized source cladding for an optical fiber

NASA Technical Reports Server (NTRS)

Egalon, Claudio Oliveira (Inventor); Rogowski, Robert S. (Inventor)

1994-01-01

An optical fiber comprising a fiber core having a longitudinal symmetry axis is provided. An active cladding surrounds a portion of the fiber core and comprises light-producing sources which emit light in response to chemical or light excitation. The cladding sources are oriented transversely with respect to the longitudinal axis of the fiber core. This polarization results in a superior power efficiency compared to active cladding sources that are randomly polarized or longitudinally polarized parallel with the longitudinal symmetry axis.

PREFACE: Diagnostics for electrical discharge light sources: pushing the limits Diagnostics for electrical discharge light sources: pushing the limits

NASA Astrophysics Data System (ADS)

Zissis, Georges; Haverlag, Marco

2010-06-01

Light sources play an indispensable role in the daily life of any human being. Quality of life, health and urban security related to traffic and crime prevention depend on light and on its quality. In fact, every day approximately 30 billion electric light sources operate worldwide. These electric light sources consume almost 19% of worldwide electricity production. Finding new ways to light lamps is a challenge where the stakes are scientific, technological, economic and environmental. The production of more efficient light sources is a sustainable solution for humanity. There are many opportunities for not only enhancing the efficiency and reliability of lighting systems but also for improving the quality of light as seen by the end user. This is possible through intelligent use of new technologies, deep scientific understanding of the operating principles of light sources and knowledge of the varied human requirements for different types of lighting in different settings. A revolution in the domain of light source technology is on the way: high brightness light emitting diodes arriving in the general lighting market, together with organic LEDs (OLEDs), are producing spectacular advances. However, unlike incandescence, electrical discharge lamps are far from disappearing from the market. In addition, new generations of discharge lamps based on molecular radiators are becoming a reality. There are still many scientific and technological challenges to be raised in this direction. Diagnostics are important for understanding the fundamental mechanisms taking place in the discharge plasma. This understanding is an absolute necessity for system optimization leading to more efficient and high quality light sources. The studied medium is rather complex, but new diagnostic techniques coupled to innovative ideas and powerful tools have been developed in recent years. This cluster issue of seven papers illustrates these efforts. The selected papers cover all domains, from high to low pressure and dielectric barrier lamps, from breakdown to acoustic resonance. Especially in the domain of high pressure lamps, J J Curry shows how coherent and incoherent x-ray scattering can be used as an imaging technique adapted to lamps. J Hirsch et al treat the acoustic resonance phenomenon that seriously limits the frequency domain for high pressure lamp operation. M Jinno et al illustrate a method that allows for measuring Xe buffer gas pressure in Hg-free metal halide lamps for automotive applications. In the domain of low pressure lamps, M Gendre et al investigate the breakdown phase by means of optical and electrical diagnostic tools. The similarity rules used a long time ago for simulating plasma behaviour based on invariants are now serving as diagnostic tools, as shown in the paper by D Michael et al. N Dagang et al show how impurities can be detected in Hg-free electrodeless lamps and more particularly in dielectric barrier discharges emitting excimer radiation. The quality of light is illustrated by a final example by R Kozakov et al on how to qualify the light output from the lamp with respect to biological effects on humans.

Optical sensor of magnetic fields

DOEpatents

Butler, M.A.; Martin, S.J.

1986-03-25

An optical magnetic field strength sensor for measuring the field strength of a magnetic field comprising a dilute magnetic semi-conductor probe having first and second ends, longitudinally positioned in the magnetic field for providing Faraday polarization rotation of light passing therethrough relative to the strength of the magnetic field. Light provided by a remote light source is propagated through an optical fiber coupler and a single optical fiber strand between the probe and the light source for providing a light path therebetween. A polarizer and an apparatus for rotating the polarization of the light is provided in the light path and a reflector is carried by the second end of the probe for reflecting the light back through the probe and thence through the polarizer to the optical coupler. A photo detector apparatus is operably connected to the optical coupler for detecting and measuring the intensity of the reflected light and comparing same to the light source intensity whereby the magnetic field strength may be calculated.

Compact OPO-based RGB source

NASA Astrophysics Data System (ADS)

Lee, Dicky; Moulton, Peter F.

2001-03-01

In this paper we discuss our red, green, and blue (RGB) optical parametric oscillator (OPO) light source for projection display applications. Our source consists of a diode-pumped pump laser and a LBO-based OPO. Based on our Nd:YLF gain-module design, the pump laser is frequency doubled to serve as the pump source for the OPO. The unconverted pump power is recycled as the green light for projection. The singly resonant, non-critically phase- matched OPO has, to date, generated 13 W of 898-nm signal power and an estimated 9.3 W of intra-cavity idler power at 1256 nm. With approximately 76% of pump depletion, the power of the residual green light for projection is about 5.8 W. We have extra-cavity doubled the signal to produce approximately 3.5 W of 449-nm blue light and intra-cavity doubled the idler to produce approximately 6 W of 628-nm red light. The OPO-based RGB source generates about 4000 lumens of D65-balanced white light. The overall electrical power luminous efficiency (diodes only) is about 14.6 lumens/Watt.

Validation of luminescent source reconstruction using spectrally resolved bioluminescence images

NASA Astrophysics Data System (ADS)

Virostko, John M.; Powers, Alvin C.; Jansen, E. D.

2008-02-01

This study examines the accuracy of the Living Image® Software 3D Analysis Package (Xenogen, Alameda, CA) in reconstruction of light source depth and intensity. Constant intensity light sources were placed in an optically homogeneous medium (chicken breast). Spectrally filtered images were taken at 560, 580, 600, 620, 640, and 660 nanometers. The Living Image® Software 3D Analysis Package was employed to reconstruct source depth and intensity using these spectrally filtered images. For sources shallower than the mean free path of light there was proportionally higher inaccuracy in reconstruction. For sources deeper than the mean free path, the average error in depth and intensity reconstruction was less than 4% and 12%, respectively. The ability to distinguish multiple sources decreased with increasing source depth and typically required a spatial separation of twice the depth. The constant intensity light sources were also implanted in mice to examine the effect of optical inhomogeneity. The reconstruction accuracy suffered in inhomogeneous tissue with accuracy influenced by the choice of optical properties used in reconstruction.

Laser ignition

DOEpatents

Early, James W.; Lester, Charles S.

2003-01-01

In the apparatus of the invention, a first excitation laser or other excitation light source is used in tandem with an ignitor laser to provide a compact, durable, engine deployable fuel ignition laser system. Reliable fuel ignition is provided over a wide range of fuel conditions by using a single remote excitation light source for one or more small lasers located proximate to one or more fuel combustion zones. In a third embodiment, alternating short and long pulses of light from the excitation light source are directed into the ignitor laser. Each of the embodiments of the invention can be multiplexed so as to provide laser light energy sequentially to more than one ignitor laser.

New Directions in X-Ray Light Sources

ScienceCinema

Falcone, Roger

2017-12-09

July 15, 2008 Berkeley Lab lecture: Molecular movies of chemical reactions and material phase transformations need a strobe of x-rays, the penetrating light that reveals how atoms and molecules assemble in chemical and biological systems and complex materials. Roger Falcone, Director of the Advanced Light Source,will discuss a new generation of x ray sources that will enable a new science of atomic dynamics on ultrafast timescales.

White LED sources for vehicle forward lighting

NASA Astrophysics Data System (ADS)

Van Derlofske, John F.; McColgan, Michele W.

2002-11-01

Considerations for the use of white light emitting diode (LED) sources to produce illumination for automotive forward lighting is presented. Due to their reliability, small size, lower consumption, and lower heat generation LEDs are a natural choice for automotive lighting systems. Currently, LEDs are being sucessfully employed in most vehicle lighting applications. In these applications the light levels, distributions, and colors needed are achievable by present LED technologies. However, for vehicle white light illumination applications LEDs are now only being considered for low light level applications, such as back-up lamps. This is due to the relatively low lumen output that has been available up to now in white LEDs. With the advent of new higher lumen packages, and with the promise of even higher light output in the near future, the use of white LEDs sources for all vehicle forward lighting applications is beginning to be considered. Through computer modeling and photometric evaluation this paper examines the possibilities of using currently available white LED technology for vehicle headlamps. It is apparent that optimal LED sources for vehicle forward lighting applications will be constructed with hereto undeveloped technology and packaging configurations. However, the intent here in exploring currently available products is to begin the discussion on the design possibilities and significant issues surrounding LEDs in order to aid in the design and development of future LED sources and systems. Considerations such as total light output, physical size, optical control, power consumption, color appearance, and the effects of white LED spectra on glare and peripheral vision are explored. Finally, conclusions of the feasibility of current LED technology being used in these applications and recommendations of technology advancements that may need to occur are made.

Lighting system with heat distribution face plate

DOEpatents

Arik, Mehmet; Weaver, Stanton Earl; Stecher, Thomas Elliot; Kuenzler, Glenn Howard; Wolfe, Jr., Charles Franklin; Li, Ri

2013-09-10

Lighting systems having a light source and a thermal management system are provided. The thermal management system includes synthetic jet devices, a heat sink and a heat distribution face plate. The synthetic jet devices are arranged in parallel to one and other and are configured to actively cool the lighting system. The heat distribution face plate is configured to radially transfer heat from the light source into the ambient air.

Large area, surface discharge pumped, vacuum ultraviolet light source

DOEpatents

Sze, Robert C.; Quigley, Gerard P.

1996-01-01

Large area, surface discharge pumped, vacuum ultraviolet (VUV) light source. A contamination-free VUV light source having a 225 cm.sup.2 emission area in the 240-340 nm region of the electromagnetic spectrum with an average output power in this band of about 2 J/cm.sup.2 at a wall-plug efficiency of approximately 5% is described. Only ceramics and metal parts are employed in this surface discharge source. Because of the contamination-free, high photon energy and flux, and short pulse characteristics of the source, it is suitable for semiconductor and flat panel display material processing.

Direction-division multiplexed holographic free-electron-driven light sources

NASA Astrophysics Data System (ADS)

Clarke, Brendan P.; MacDonald, Kevin F.; Zheludev, Nikolay I.

2018-01-01

We report on a free-electron-driven light source with a controllable direction of emission. The source comprises a microscopic array of plasmonic surface-relief holographic domains, each tailored to direct electron-induced light emission at a selected wavelength into a collimated beam in a prescribed direction. The direction-division multiplexed source is tested by driving it with the 30 kV electron beam of a scanning electron microscope: light emission, at a wavelength of 800 nm in the present case, is switched among different output angles by micron-scale repositioning of the electron injection point among domains. Such sources, with directional switching/tuning possible at picosecond timescales, may be applied to field-emission and surface-conduction electron-emission display technologies, optical multiplexing, and charged-particle-beam position metrology.

Passivation of quartz for halogen-containing light sources

DOEpatents

Falkenstein, Zoran

1999-01-01

Lifetime of halogen containing VUV, UV, visible or IR light sources can be extended by passivating the quartz or glass gas containers with halogens prior to filling the quartz with the halogen and rare gas mixtures used to produce the light.

Importance of holographic light in the emerging field of mind-body healing

NASA Astrophysics Data System (ADS)

Booth, Roberta

2000-10-01

Healing with color has been researched and documented worldwide for centuries. Every single part of the brain and every cell in the body is effected by light. Chinese and Russian scientists demonstrated that the acupuncture meridians transmit light. Dr. Peter Mandel, German chiropractic physician and acupuncturist, states that the acupuncture points are especially sensitive to electromagnetic waves within the spectrum of visible light and microwave energy, and all cells constantly emit and absorb small pockets of electromagnetic radiation or light, called biophotons. The harmony or disharmony of cells has been documented. Kirlian photography, to photography the aura was invented by Russians Semyon and Valentina Kirlian. Photo therapy and light research are being practiced worldwide. In the United States, Dr. Jacob Lieberman has written an influential book Light Medicine of the Future. In 1992 the first Light Years Ahead conference was held. (#5 1996) Dr. Brian Breiling and Dr. Lee Hartley brought together experts in the field to discuss the many potentials of light therapy. My present research in this area has focused on narrow band frequencies through the use of holography. Its therapeutic applications of color healing in this research are both critical and fundamental. My current work, The Chakras, seven reflection holograms on silver halide, relate to the wheels of light described in the earliest recorded Indian history. I will discus the chakras, this ancient metaphysical system under the new light of popular western metaphors and visionary art, how the chakras relate to the seven colors of the rainbow, the electromagnetic waves, and the connection to color holography in healing light therapy. I will be citing concurrent research in color healing, and the important areas of research that are necessary to have significant impact on future directions. Holography in the future will constitute a major frontier in discovery.

Conjugation of fiber-coupled wide-band light sources and acousto-optical spectral elements

NASA Astrophysics Data System (ADS)

Machikhin, Alexander; Batshev, Vladislav; Polschikova, Olga; Khokhlov, Demid; Pozhar, Vitold; Gorevoy, Alexey

2017-12-01

Endoscopic instrumentation is widely used for diagnostics and surgery. The imaging systems, which provide the hyperspectral information of the tissues accessible by endoscopes, are particularly interesting and promising for in vivo photoluminescence diagnostics and therapy of tumour and inflammatory diseases. To add the spectral imaging feature to standard video endoscopes, we propose to implement acousto-optical (AO) filtration of wide-band illumination of incandescent-lamp-based light sources. To collect maximum light and direct it to the fiber-optic light guide inside the endoscopic probe, we have developed and tested the optical system for coupling the light source, the acousto-optical tunable filter (AOTF) and the light guide. The system is compact and compatible with the standard endoscopic components.

Nonimaging Optical Illumination System

DOEpatents

Winston, Roland

1994-02-22

A nonimaging illumination or concentration optical device. An optical device is provided having a light source, a light reflecting surface with an opening and positioned partially around the light source which is opposite the opening of the light reflecting surface. The light reflecting surface is disposed to produce a substantially uniform intensity output with the reflecting surface defined in terms of a radius vector R.sub.i in conjunction with an angle .phi..sub.i between R.sub.i, a direction from the source and an angle .theta..sub.i between direct forward illumination and the light ray reflected once from the reflecting surface. R.sub.i varies as the exponential of tan (.phi..sub.i -.theta..sub.i)/2 integrated over .phi..sub.i.

Color-tunable lighting devices and methods of use

DOEpatents

Davis, James Lynn

2017-02-07

A lighting device (100) includes a housing (104) enclosing a housing interior (108), a light source (132), a light converter (136), and a color tuning device. The light source is configured for emitting a primary light beam of a primary wavelength (140) through the housing interior. The light converter includes a luminescent material (144) facing the housing interior and configured for emitting secondary light (156, 158) of one or more wavelengths different from the primary wavelength, in response to excitation by the primary light beam. The housing includes a light exit (124) for outputting a combination of primary light and secondary light. The color tuning device is configured for adjusting a position of the primary light beam relative to the luminescent material.

Introducing Darwinism to Toronto's post-1887 reconstituted medical school.

PubMed

Court, John P M

2011-01-01

Charles Darwin's scientific paradigm was largely welcomed in Canadian academic biology and medicine, while reaction among other faculty and laypeople ranged from interest to outrage. In 1874, Ramsay Wright, a Darwinian-era biologist from Edinburgh, was appointed to the University of Toronto's Chair of Natural History. Over his 38-year career Wright integrated the evolutionary perspective into medical and biology teaching without accentuating its controversial source. He also applied the emerging German experimental research model and laboratory technology. This study identifies five categories of scientific and personal influences upon Wright through archival research on biographical sources and his writings.

The international aerospace industry - New challenges and opportunities for translation suppliers

NASA Technical Reports Server (NTRS)

Rowe, T.

1986-01-01

Attention is given to the recent trend toward internationalization in the aerospace industry and its effects on commercial and governmental translation programs. The aerospace industry, once dominated by organizations from a small number of countries, is now widely international in scope. In effect, there has been in increase in the demand for translations from German, Japanese, Chinese, French and Spanish source material while that for translation from Russian source material has remained constant. The impact of the Challenger disaster on aerospace translation programs is discussed as well as the impact of international participation in Space Station research.

Radiometric liquid level gauge with linear-detection (in German)

DOE Office of Scientific and Technical Information (OSTI.GOV)

Glaeser, M.; Emmelmann, K.P.

1973-09-01

A description is given of a radiometric liquid level gauge with linear detection. It consists of a set of radioactive sources (e.g., /sup 137/Cs) with quadratic graduation in their activities, of a scintillation counter with electronic back-up unit and of a slender tube. The tube, sources and scintillation counter form a compact snd easily transportsble liquid level gauge. It is-especially adapted for liquid level measurements in slender, difficulty accessible and opaque containers. The device supplements the different methods for liquid level measurement with a new variant which is adopted for many cases in practice. (auth)

Diet reconstruction in the Roman era.

PubMed

Smrcka, V; Jambor, J; Gladykowska-Rzeczycka, J; Marczik, A

2000-01-01

The samples from the proximal femora were taken from 12 cementeries from the Roman period. The skeletons date from the 1st-4th centuries A.D. Trace element analysis was used in order to reconstruct the basic diet. The sites that best corresponded to the model of Old Germanic diet described by ancient authors "meat, milk and cheese" were found in the Pruszcz Gdanski East Pomerania region close to the Baltic sea as well as in region Halle (Niemberg) and not far from Donau (Sládkovicovo). This diet is characterized by a large amount of protein and consequently of zinc. In the original Old Germanic region in a time period of more than 1000 years (from 400 B.C. to 700 A.D.) there is the same type of trace elements sources for bones and also the same type of the diet. This possibly distinguishes Germanic soldiers (aboriginal) from others groups in Roman legionary camps. It seems that the Donau River is very important for predicting the type of diet in the Roman period. North of the river animal component prevails south of the river vegetal component prevails. The rich agricultural land along the Donau River and in the Pannonian plains affects social arrangement as well as the structure of bones in Germans and Sarmats in the 2nd-4th centuries. Lead became a civilization element. It appeared in the diet of the Greek and Romans. Contamination varied with different social classes. We have found higher lead concentration in the femurs of the Germans than in those of the Sarmatians. The highest concentration we found was in Pannonian towns (Gorsium, Sopianae) and legionary camps (Straubing, Gerulata). In reference to age, the maxima of the highest lead concentrations in Gerulata II are between 11 and 13 years of age and between 40 and 50 years.

Apparatus and method for measuring the thickness of a semiconductor wafer

DOEpatents

Ciszek, T.F.

1995-03-07

Apparatus for measuring thicknesses of semiconductor wafers is discussed, comprising: housing means for supporting a wafer in a light-tight environment; a light source mounted to the housing at one side of the wafer to emit light of a predetermined wavelength to normally impinge the wafer; a light detector supported at a predetermined distance from a side of the wafer opposite the side on which a light source impinges and adapted to receive light transmitted through the wafer; and means for measuring the transmitted light. 4 figs.

Scintillation probe with photomultiplier tube saturation indicator

DOEpatents

Ruch, Jeffrey F.; Urban, David J.

1996-01-01

A photomultiplier tube saturation indicator is formed by supplying a supplemental light source, typically an light emitting diode (LED), adjacent to the photomultiplier tube. A switch allows the light source to be activated. The light is forwarded to the photomultiplier tube by an optical fiber. If the probe is properly light tight, then a meter attached to the indicator will register the light from the LED. If the probe is no longer light tight, and the saturation indicator is saturated, no signal will be registered when the LED is activated.

Blue enhanced light sources: opportunities and risks

NASA Astrophysics Data System (ADS)

Lang, Dieter

2012-03-01

Natural daylight is characterized by high proportions of blue light. By proof of a third type of photoreceptor in the human eye which is only sensitive in this spectral region and by subsequent studies it has become obvious that these blue proportions are essential for human health and well being. In various studies beneficial effects of indoor lighting with higher blue spectral proportions have been proven. On the other hand with increasing use of light sources having enhanced blue light for indoor illumination questions are arising about potential health risks attributed to blue light. Especially LED are showing distinct emission characteristics in the blue. Recently the French agency for food, environmental and occupational health & safety ANSES have raised the question on health issues related to LED light sources and have claimed to avoid use of LED for lighting in schools. In this paper parameters which are relevant for potential health risks will be shown and their contribution to risk factors will quantitatively be discussed. It will be shown how to differentiate between photometric parameters for assessment of beneficial as well as hazardous effects. Guidelines will be discussed how blue enhanced light sources can be used in applications to optimally support human health and well being and simultaneously avoid any risks attributed to blue light by a proper design of lighting parameters. In the conclusion it will be shown that no inherent health risks are related to LED lighting with a proper lighting design.

Prospects for research in haemophilia with real-world data-An analysis of German registry and secondary data.

PubMed

Schopohl, D; Bidlingmaier, C; Herzig, D; Klamroth, R; Kurnik, K; Rublee, D; Schramm, W; Schwarzkopf, L; Berger, K

2018-02-28

Open questions in haemophilia, such as effectiveness of innovative therapies, clinical and patient-reported outcomes (PROs), epidemiology and cost, await answers. The aim was to identify data attributes required and investigate the availability, appropriateness and accessibility of real-world data (RWD) from German registries and secondary databases to answer the aforementioned questions. Systematic searches were conducted in BIOSIS, EMBASE and MEDLINE to identify non-commercial secondary healthcare databases and registries of patients with haemophilia (PWH). Inclusion of German patients, type of patients, data elements-stratified by use in epidemiology, safety, outcomes and health economics research-and accessibility were investigated by desk research. Screening of 676 hits, identification of four registries [national PWH (DHR), national/international paediatric (GEPARD, PEDNET), international safety monitoring (EUHASS)] and seven national secondary databases. Access was limited to participants in three registries and to employees in one secondary database. One registry asks for PROs. Limitations of secondary databases originate from the ICD-coding system (missing: severity of haemophilia, presence of inhibitory antibodies), data protection laws and need to monitor reliability. Rigorous observational analysis of German haemophilia RWD shows that there is potential to supplement current knowledge and begin to address selected policy goals. To improve the value of existing RWD, the following efforts are proposed: ethical, legal and methodological discussions on data linkage across different sources, formulation of transparent governance rules for data access, redefinition of the ICD-coding, standardized collection of outcome data and implementation of incentives for treatment centres to improve data collection. © 2018 John Wiley & Sons Ltd.

Dietary iron intake and iron status of German female vegans: results of the German vegan study.

PubMed

Waldmann, Annika; Koschizke, Jochen W; Leitzmann, Claus; Hahn, Andreas

2004-01-01

As shown in previous studies vegetarians and especially vegans are at risk for iron deficiency. Our study evaluated the iron status of German female vegans. In this cross-sectional study, the dietary intakes of 75 vegan women were assessed by two 9-day food frequency questionnaires. The iron status was analyzed on the basis of blood parameters. Mean daily iron intake was higher than recommended by the German Nutrition Society. Still 42% of the female vegans < 50 years (young women, YW) had a daily iron intake of < 18 mg/day, which is the recommended allowance by the US Food and Nutrition Board. The main dietary sources of iron were vegetables, fruits, cereals and cereal products. Median serum ferritin concentrations were 14 ng/ml for YW and 28 ng/ml for women > or = 50 years (old women, OW). In all, 40% (tri-index model (TIM) 20%) of the YW and 12% (TIM 12%) of the OW were considered iron-deficient based on either serum ferritin levels of < 12 ng/ml or a TIM. Only 3 women had blood parameters which are defined as iron deficiency anemia. Correlations between serum ferritin levels and dietary factors were not found. Although the mean iron intake was above the recommended level, 40% (TIM 20%) of the YW were considered iron-deficient. It is suggested that especially YM on a vegan diet should have their iron status monitored and should consider taking iron supplements in case of a marginal status. Copyright 2004 S. Karger AG, Basel

Deconnable self-reading pocket dosimeter containment with self-contained light

DOE Office of Scientific and Technical Information (OSTI.GOV)

Stevens, R.L.; Arnold, G.N.; McBride, R.G.

1996-10-22

A container for a self-reading pocket dosimeter includes a transparent tube for receiving the self-reading pocket dosimeter, a light source mounted at one end of the transparent tube, and an eyepiece mounted on an opposite end of the transparent tube for viewing a read-out of the self-reading pocket dosimeter. The container may further include an activation device for selectively supplying power to the light source. The container both protects the dosimeter from being contaminated and provides a light source for viewing the dosimeter. 4 figs.

Deconnable self-reading pocket dosimeter containment with self-contained light

DOE Office of Scientific and Technical Information (OSTI.GOV)

Stevens, R.L.; Arnold, G.N.; McBride, R.G.

1995-12-31

A container for a self-reading pocket dosimeter includes a transparent tube for receiving the self-reading pocket dosimeter, a light source mounted at one end of the transparent tube, and an eyepiece mounted on an opposite end of the transparent tube for viewing a read-out of the self-reading pocket dosimeter. The container may further include an activation device for selectively supplying power to the light source. The container both protects the dosimeter from being contaminated and provides a light source for viewing the dosimeter.

Deconnable self-reading pocket dosimeter containment with self-contained light

DOEpatents

Stevens, Robyn L.; Arnold, Greg N.; McBride, Ryan G.

1996-01-01

A container for a self-reading pocket dosimeter includes a transparent tube for receiving the self-reading pocket dosimeter, a light source mounted at one end of the transparent tube, and an eyepiece mounted on an opposite end of the transparent tube for viewing a read-out of the self-reading pocket dosimeter. The container may further include an activation device for selectively supplying power to the light source. The container both protects the dosimeter from being contaminated and provides a light source for viewing the dosimeter.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Tucker, R.A.

This paper reports that properly applied, light sources and lighting systems not only enhance a building's attractiveness and usability, they also create a secure environment. An effectively lighted area can minimize pedestrian hazards and auto accidents. Good security lighting also eliminates the darkness that vandals, thieves, and felons thrive on. Unfortunately, lighting quality has sometimes been sacrificed for the sake of energy efficiency, and resulting savings offset by poor aesthetics and user dissatisfaction. However, trade-offs in quality and efficiency are not necessary, thanks to recent developments in light source technology.

Current problems in the theory of disordered semiconductors

DOE Office of Scientific and Technical Information (OSTI.GOV)

Bonch-Bruevich, V.L.

1987-05-01

This paper is an expanded version of a report read by the author at the 2nd All-Union Conference on Quantum chemistry of Solids (Riga, 1985) and at the 9th Session of Physics and Electronics (German Democratic Republic, Berlin, 1985). Three questions, which are under intensive discussion in the current literature, are examined: intermediate order in disordered semiconductors, the structure of the energy spectrum and wave functions near the mobility threshold, and the determination of the density of states in the mobility gap based on experimental data on the absorption of light.

A new day: Challenger and space flight thereafter

NASA Technical Reports Server (NTRS)

Vonputtkamer, Jesco

1986-01-01

On January 28, 1986, at an altitude of 14 kilometers, the Space Shuttle Challenger was torn apart by an explosion of the external tank. The effects of the accident are undoubtedly far-reaching; they have broad repercussions that affect NASA's international partner organizations. The effects of the postponed shuttle flights on European space programs are discussed. A review of the German participation in the American space program is presented. The need to continue the future projects such as the space station is examined in light of its importance as a springboard for further exploration.

Brotherhood-in-Arms East German Foreign Policy in Africa ’Kalashnikoffs, not Coca Cola Bring Self-Determination to Angola’ Volksarmee, 1978.

DTIC Science & Technology

1980-06-01

portrayed in Table II. Despite these " advances ," the GDR encountered the Hallstein Doctrine at every bend in the road. For example, when Zanzibar...but not the Cubans apparently, have essentially been excluded from the main stream of Zimbabwe’s political life . Elsewhere, the resolution of...aimed at fostering its image as a firm suporter of progressive forces. In light of East lerman activities in Latin America, it is interesting to note

Evaluation of Recommended Improvements to the Family Housing Self-Help Program

DTIC Science & Technology

1987-09-01

FY96 EST. EST. TASK LABOR TASK LABOR :OOPL. COST COMPL. COST ITM OCCURRENCES TIME AVCIDED OCCJRFENCES TIME AVOIDED FRACkE T, C 0 I 1 150 WIRE, FABRIC...InSuLatinq blankets on hot water heater AS i. ;Ieed radiator RG Si. identify 3no report suspected gas *;eaks RU FO 6). qelll~t pi~ot lights RU RU 101 A1...VII Corps ATTN: German Liaison Off icer ATTN: DEN (15) ATTN: Water Resources Support Ctr 21s, Support Command ATTN: Engr Studies Center ATTN: OEM (12

The nursing educator's role in e-learning: a literature review.

PubMed

Koch, Lee F

2014-11-01

e-Learning is becoming more commonplace in nursing and healthcare professional education. Research has shown that e-learning can be just as effective at helping students achieve cognitive learning objectives as traditional face-to-face courses, provided that certain quality criteria are met. However, the decentralized, asynchronous nature of e-learning precludes spontaneous, personal interaction between the instructor and the learner. In addition to this, learning objectives in nursing and other healthcare professions are not only within the cognitive, but also within the affective and psychomotor domains. This article seeks to answer the following question: How does e-learning transform the role of nurse educators? Narrative literature review. A comprehensive database search was conducted using the English and German key words "teacher," "educator," "role," "e-learning," and "nursing" to identify literature that examined the role of (nurse) educators in e-learning. The search strategy resulted in the inclusion of 40 sources. The majority of the literature is expert opinion and examines the educator's role in e-learning from a theoretical point of view (n=30). There is a paucity of empirical research pertaining directly to the educator's role (n=10). Only four sources deal specifically with the nurse educator's role. The literature agrees on the need for a new role definition in light of e-learning. This role is more complex than the educator's traditional role. The literature does not provide any indication of how the educator's role can be adapted to the specific needs of online nurse education. There is a need for more empirical research on this subject. Copyright © 2014 Elsevier Ltd. All rights reserved.

An entangled-light-emitting diode.

PubMed

Salter, C L; Stevenson, R M; Farrer, I; Nicoll, C A; Ritchie, D A; Shields, A J

2010-06-03

An optical quantum computer, powerful enough to solve problems so far intractable using conventional digital logic, requires a large number of entangled photons. At present, entangled-light sources are optically driven with lasers, which are impractical for quantum computing owing to the bulk and complexity of the optics required for large-scale applications. Parametric down-conversion is the most widely used source of entangled light, and has been used to implement non-destructive quantum logic gates. However, these sources are Poissonian and probabilistically emit zero or multiple entangled photon pairs in most cycles, fundamentally limiting the success probability of quantum computational operations. These complications can be overcome by using an electrically driven on-demand source of entangled photon pairs, but so far such a source has not been produced. Here we report the realization of an electrically driven source of entangled photon pairs, consisting of a quantum dot embedded in a semiconductor light-emitting diode (LED) structure. We show that the device emits entangled photon pairs under d.c. and a.c. injection, the latter achieving an entanglement fidelity of up to 0.82. Entangled light with such high fidelity is sufficient for application in quantum relays, in core components of quantum computing such as teleportation, and in entanglement swapping. The a.c. operation of the entangled-light-emitting diode (ELED) indicates its potential function as an on-demand source without the need for a complicated laser driving system; consequently, the ELED is at present the best source on which to base future scalable quantum information applications.

Optimization approach to LED crop illumination inside a controlled ecological life support system

NASA Astrophysics Data System (ADS)

Avercheva, Olga; Berkovich, Yuliy A.; Bassarskaya, Elizaveta; Zhigalova, Tatiana; Smolyanina, Svetlana O.; Kochetova, Galina; Konovalova, Irina

Artificial lighting sources for growing plants can be efficiently used to control gas exchange and preserve the necessary closure of internal matter turnover in the atmosphere of a controlled ecological life support system (CELSS). However, the lighting sources contribute strongly to the equivalent mass of a CELSS. Thus, the choice of an optimal plant lighting regime largely determines the efficiency of the artificial ecosystem. Lighting systems based on light-emitting diodes (LEDs) are now considered the most promising for space applications (Massa et al., 2006). Many types of LEDs have been developed in recent years. Because of this, the problem of optimizing a lighting source for space vegetation chambers has become more difficult: we need to optimize more parameters (such as emission spectrum, light intensity, frequency of light pulses and the shape of the lighting field inside a vegetation chamber), and in a wider range of values. In this presentation we discuss approaches to optimizing the emission spectrum of a lighting source for the use in space applications, including CELSS. One of the benefits of LEDs is their narrow-band emission spectrum, which allows us to construct a lighting source with an optimal spectrum for plant growth and production. A number of experiments have shown that the reaction of plants to a narrow-band emission spectrum of LEDs is highly species-specific and affects many processes in plants. Adding a small amount of far red light to red and blue quanta increased biomass in radish and lettuce (Tamulaitis et al., 2005). Adding blue and near UV light of different wavelengths to red light decreased total sugar content in lettuce (Urbonavičiūtė et al., 2007) and Chinese cabbage (Avercheva et al., 2009). Supplemental green light improved the nutrition quality of some lettuce varieties: decreased nitrate content and increased ascorbic acid content (Samuoliene et al., 2012). It has also been shown that changes in lighting spectrum can lead to changes in hormone content in plant tissues, and to changes in the ratio of active and inactive forms of hormones (Golovatskaya, 2005; Tamulaitis et al., 2005; Minich et al., 2006). This, in turn, may lead to changes in plant growth and biomass composition. Thus, we should vary the emission spectrum of a lighting source to improve both the productivity (i.e. gas exchange) and nutrition quality of plants growing inside a CELSS. However, it is hard to find a universal spectrum for all plants and all applications. Fundamental studies of the finer effects of narrow-band light on plant growth and metabolism may be beneficial to explain these effects. On the basis of these studies, we may be able to formulate recommendations to optimize lighting sources for different plant species. One optimization approach to LED crop illumination inside CELSS could be use of white LEDs with proper addition of red LEDs. A more difficult approach is to construct lighting sources with a multiband spectrum to adjust it for specific applications experimentally.

DUV light source sustainability achievements and next steps

NASA Astrophysics Data System (ADS)

Roman, Yzzer; Cacouris, Ted; Raju, Kumar Raja Guvindan; Kanawade, Dinesh; Gillespie, Walt; Luo, Siqi; Mason, Eric; Manley, David; Das, Saptaparna

2018-03-01

Key sustainability opportunities have been executed in support of corporate initiatives to reduce the environmental footprint and decrease the running cost of DUV light sources. Previously, substantial neon savings were demonstrated over several years through optimized gas management technologies. Beyond this work, Cymer is developing the XLGR 100, a self-contained neon recycling system, to enable minimal gas consumption. The high efficiency results of the XLGR 100 in a production factory are validated in this paper. Cymer has also developed new light source modules with 33% longer life in an effort to reduce raw and associated resource consumption. In addition, a progress report is included regarding the improvements developed to reduce light source energy consumption.

In vivo evaluation of battery-operated light-emitting diode-based photodynamic therapy efficacy using tumor volume and biomarker expression as endpoints

NASA Astrophysics Data System (ADS)

Mallidi, Srivalleesha; Mai, Zhiming; Rizvi, Imran; Hempstead, Joshua; Arnason, Stephen; Celli, Jonathan; Hasan, Tayyaba

2015-04-01

In view of the increase in cancer-related mortality rates in low- to middle-income countries (LMIC), there is an urgent need to develop economical therapies that can be utilized at minimal infrastructure institutions. Photodynamic therapy (PDT), a photochemistry-based treatment modality, offers such a possibility provided that low-cost light sources and photosensitizers are available. In this proof-of-principle study, we focus on adapting the PDT light source to a low-resource setting and compare an inexpensive, portable, battery-powered light-emitting diode (LED) light source with a standard, high-cost laser source. The comparison studies were performed in vivo in a xenograft murine model of human squamous cell carcinoma subjected to 5-aminolevulinic acid-induced protoporphyrin IX PDT. We observed virtually identical control of the tumor burden by both the LED source and the standard laser source. Further insights into the biological response were evaluated by biomarker analysis of necrosis, microvessel density, and hypoxia [carbonic anhydrase IX (CAIX) expression] among groups of control, LED-PDT, and laser-PDT treated mice. There is no significant difference in the percent necrotic volume and CAIX expression in tumors that were treated with the two different light sources. These encouraging preliminary results merit further investigations in orthotopic animal models of cancers prevalent in LMICs.

Radio Frequency Plasma Discharge Lamps for Use as Stable Calibration Light Sources

NASA Technical Reports Server (NTRS)

McAndrew, Brendan; Cooper, John; Arecchi, Angelo; McKee, Greg; Durell, Christopher

2012-01-01

Stable high radiance in visible and near-ultraviolet wavelengths is desirable for radiometric calibration sources. In this work, newly available electrodeless radio-frequency (RF) driven plasma light sources were combined with research grade, low-noise power supplies and coupled to an integrating sphere to produce a uniform radiance source. The stock light sources consist of a 28 VDC power supply, RF driver, and a resonant RF cavity. The RF cavity includes a small bulb with a fill gas that is ionized by the electric field and emits light. This assembly is known as the emitter. The RF driver supplies a source of RF energy to the emitter. In commercial form, embedded electronics within the RF driver perform a continual optimization routine to maximize energy transfer to the emitter. This optimization routine continually varies the light output sinusoidally by approximately 2% over a several-second period. Modifying to eliminate this optimization eliminates the sinusoidal variation but allows the output to slowly drift over time. This drift can be minimized by allowing sufficient warm-up time to achieve thermal equilibrium. It was also found that supplying the RF driver with a low-noise source of DC electrical power improves the stability of the lamp output. Finally, coupling the light into an integrating sphere reduces the effect of spatial fluctuations, and decreases noise at the output port of the sphere.

Design methodology for micro-discrete planar optics with minimum illumination loss for an extended source.

PubMed

Shim, Jongmyeong; Park, Changsu; Lee, Jinhyung; Kang, Shinill

2016-08-08

Recently, studies have examined techniques for modeling the light distribution of light-emitting diodes (LEDs) for various applications owing to their low power consumption, longevity, and light weight. The energy mapping technique, a design method that matches the energy distributions of an LED light source and target area, has been the focus of active research because of its design efficiency and accuracy. However, these studies have not considered the effects of the emitting area of the LED source. Therefore, there are limitations to the design accuracy for small, high-power applications with a short distance between the light source and optical system. A design method for compensating for the light distribution of an extended source after the initial optics design based on a point source was proposed to overcome such limits, but its time-consuming process and limited design accuracy with multiple iterations raised the need for a new design method that considers an extended source in the initial design stage. This study proposed a method for designing discrete planar optics that controls the light distribution and minimizes the optical loss with an extended source and verified the proposed method experimentally. First, the extended source was modeled theoretically, and a design method for discrete planar optics with the optimum groove angle through energy mapping was proposed. To verify the design method, design for the discrete planar optics was achieved for applications in illumination for LED flash. In addition, discrete planar optics for LED illuminance were designed and fabricated to create a uniform illuminance distribution. Optical characterization of these structures showed that the design was optimal; i.e., we plotted the optical losses as a function of the groove angle, and found a clear minimum. Simulations and measurements showed that an efficient optical design was achieved for an extended source.

Development of a UAV-mounted Light Source for Fluorescence Detector Calibration of the Telescope Array Experiment

NASA Astrophysics Data System (ADS)

Hayashi, Motoki; Tameda, Yuichiro; Tomida, Takayuki; Tsunesada, Yoshiki; Seki, Terutsugu; Saito, Yoshinori

We are developing a unmanned aerial vehicle (UAV), which is called "Opt-copter", carrying a calibrated light source for fluorescence detector (FD) calibration of the Telescope Array (TA) experiment. Opt-copter is equipped with a high accuracy GPS device and a LED light source in the shape of a dodecahedron. A positioning accuracy of the GPS mounted on the UAV is 0.1 m, which meets the requirement for the calibration of the FDs at the distance of 100 m. The light source consists of 12 UV LEDs attached on each side of the dodecahedron, and it is covered with a spherical diffuser to improve the spatial uniformity of the light intensity. We report the status of Opt-copter development and the results of its test at the TA site.

Analysis of German Patent Literature

DTIC Science & Technology

2012-08-01

the entities that are pictured in the gures, as they are likely to be important parts of the patent. Chunking is not a big source of errors - most...document groups, where the documents need not be exact translations. 21 Bibliography [1] Sabine Brants, Stefanie Dipper , Silvia Hansen, Wolfgang Lezius...mit ] A big sh [ übersetzt] ITJ Interjektion interjection mhm, ach, tja KOUI unterordnende Konjunktion mit zu und Innitiv subordinating conjunction

The German Colonies in Die Weltgeschichte als Kolonialgeschichte: The Use of Filmic Techniques in Colonial Revisionism in the 1920s

ERIC Educational Resources Information Center

Annegarn-Gläß, Michael

2016-01-01

Academic history has begun only relatively recently to study films as historical sources, and thus far it has focused principally on feature films to the exclusion of nonfictional cinema, despite the use of educational films for propaganda as early as the interwar period. This essay examines the extent to which educational films of this period…

A time-domain fluorescence diffusion optical tomography system for breast tumor diagnosis

NASA Astrophysics Data System (ADS)

Zhang, Wei; Gao, Feng; Wu, LinHui; Ma, Wenjuan; Yang, Fang; Zhou, Zhongxing; Zhang, Limin; Zhao, Huijuan

2011-02-01

A prototype time-domain fluorescence diffusion optical tomography (FDOT) system using near-infrared light is presented. The system employs two pulsed light sources, 32 source fibers and 32 detection channels, working separately for acquiring the temporal distribution of the photon flux on the tissue surface. The light sources are provided by low power picosecond pulsed diode lasers at wavelengths of 780 nm and 830 nm, and a 1×32-fiber-optic-switch sequentially directs light sources to the object surface through 32 source fibers. The light signals re-emitted from the object are collected by 32 detection fibers connected to four 8×1 fiber-optic-switch and then routed to four time-resolved measuring channels, each of which consists of a collimator, a filter wheel, a photomultiplier tube (PMT) photon-counting head and a time-correlated single photon counting (TCSPC) channel. The performance and efficacy of the designed multi-channel PMT-TCSPC system are assessed by reconstructing the fluorescent yield and lifetime images of a solid phantom.

Spectrum synthesis for a spectrally tunable light source based on a DMD-convex grating Offner configuration

NASA Astrophysics Data System (ADS)

Ma, Suodong; Pan, Qiao; Shen, Weimin

2016-09-01

As one kind of light source simulation devices, spectrally tunable light sources are able to generate specific spectral shape and radiant intensity outputs according to different application requirements, which have urgent demands in many fields of the national economy and the national defense industry. Compared with the LED-type spectrally tunable light source, the one based on a DMD-convex grating Offner configuration has advantages of high spectral resolution, strong digital controllability, high spectrum synthesis accuracy, etc. As a key link of the above type light source to achieve target spectrum outputs, spectrum synthesis algorithm based on spectrum matching is therefore very important. An improved spectrum synthesis algorithm based on linear least square initialization and Levenberg-Marquardt iterative optimization is proposed in this paper on the basis of in-depth study of the spectrum matching principle. The effectiveness of the proposed method is verified by a series of simulations and experimental works.

Biomass and pigments production in photosynthetic bacteria wastewater treatment: effects of light sources.

PubMed

Zhou, Qin; Zhang, Panyue; Zhang, Guangming

2015-03-01

This study is aimed at enhancing biomass and pigments production together with pollution removal in photosynthetic bacteria (PSB) wastewater treatment via different light sources. Red, yellow, blue, white LED and incandescent lamp were used. Results showed different light sources had great effects on the PSB. PSB had the highest biomass production, COD removal and biomass yield with red LED. The corresponding biomass, COD removal and biomass yield reached 2580 mg/L, 88.6% and 0.49 mg-biomass/mg-COD-removal, respectively. The hydraulic retention time of wastewater treatment could be shortened to 72 h with red LED. Mechanism analysis showed higher ATP was produced with red LED than others. Light sources could significantly affect the pigments production. The pigments productions were greatly higher with LED than incandescent lamp. Yellow LED had the highest pigments production while red LED produced the highest carotenoid/bacteriochlorophyll ratio. Considering both efficiency and energy cost, red LED was the optimal light source. Copyright © 2014 Elsevier Ltd. All rights reserved.

Solution of multi-element LED light sources development automation problem

NASA Astrophysics Data System (ADS)

Chertov, Aleksandr N.; Gorbunova, Elena V.; Korotaev, Valery V.; Peretyagin, Vladimir S.

2014-09-01

The intensive development of LED technologies resulted in the creation of multicomponent light sources in the form of controlled illumination devices based on usage of mentioned LED technologies. These light sources are used in different areas of production (for example, in the food industry for sorting products or in the textile industry for quality control, etc.). The use of LED lighting products in the devices used in specialized lighting, became possible due to wide range of colors of light, LED structures (which determines the direction of radiation, the spatial distribution and intensity of the radiation, electrical, heat, power and other characteristics), and of course, the possibility of obtaining any shade in a wide dynamic range of brightness values. LED-based lighting devices are notable for the diversity of parameters and characteristics, such as color radiation, location and number of emitters, etc. Although LED technologies have several advantages, however, they require more attention if you need to ensure a certain character of illumination distribution and/or distribution of the color picture at a predetermined distance (for example, at flat surface, work zone, area of analysis or observation). This paper presents software designed for the development of the multicomponent LED light sources. The possibility of obtaining the desired color and energy distribution at the zone of analysis by specifying the spatial parameters of the created multicomponent light source and using of real power, spectral and color parameters and characteristics of the LEDs is shown as well.

Conversion degrees of resin composites using different light sources.

PubMed

Ozturk, Bora; Cobanoglu, Nevin; Cetin, Ali Rıza; Gunduz, Beniz

2013-01-01

The objective of this study was to compare the conversion degree of six different composite materials (Filtek Z 250, Filtek P60, Spectrum TPH, Pertac II, Clearfil AP-X, and Clearfil Photo Posterior) using three different light sources (blue light-emitting diode [LED], plasma arc curing [PAC], and conventional halogen lamp [QTH]). Composites were placed in a 2 mm thick and 5 mm diameter Teflon molds and light cured from the top using three methods: LED for 40 s, PAC for 10 s, and QTH for 40 s. A Fourier Transform Infrared Spectroscopy (FTIR) was used to evaluate the degree of conversion (DC) (n=5). The results were analyzed with two-way analysis of variance and Tukey HSD test. DC was significantly influenced by two variables, light source and composite (P<.05). QTH revealed significantly higher DC values than LED (P<.05). However, there were no significant differences between DC values of QTH and PAC or between DC values of LED and PAC (P>.05). The highest DC was observed in the Z 250 composite specimens following photopolymerization with QTH (70%). The lowest DC was observed in Clearfil Photo Posterior composite specimens following photo-polymerization with LED (43%). The DC was found to be changing according to both light sources and composite materials used. Conventional light halogen (QTH) from light sources and Filtek Z 250 and Filtek P 60 among composite materials showed the most DC performance.

An aluminium nitride light-emitting diode with a wavelength of 210 nanometres.

PubMed

Taniyasu, Yoshitaka; Kasu, Makoto; Makimoto, Toshiki

2006-05-18

Compact high-efficiency ultraviolet solid-state light sources--such as light-emitting diodes (LEDs) and laser diodes--are of considerable technological interest as alternatives to large, toxic, low-efficiency gas lasers and mercury lamps. Microelectronic fabrication technologies and the environmental sciences both require light sources with shorter emission wavelengths: the former for improved resolution in photolithography and the latter for sensors that can detect minute hazardous particles. In addition, ultraviolet solid-state light sources are also attracting attention for potential applications in high-density optical data storage, biomedical research, water and air purification, and sterilization. Wide-bandgap materials, such as diamond and III-V nitride semiconductors (GaN, AlGaN and AlN; refs 3-10), are potential materials for ultraviolet LEDs and laser diodes, but suffer from difficulties in controlling electrical conduction. Here we report the successful control of both n-type and p-type doping in aluminium nitride (AlN), which has a very wide direct bandgap of 6 eV. This doping strategy allows us to develop an AlN PIN (p-type/intrinsic/n-type) homojunction LED with an emission wavelength of 210 nm, which is the shortest reported to date for any kind of LED. The emission is attributed to an exciton transition, and represents an important step towards achieving exciton-related light-emitting devices as well as replacing gas light sources with solid-state light sources.

… but You Are Not German." -- Afro-German Culture and Literature in the German Language Classroom

ERIC Educational Resources Information Center

Schenker, Theresa; Munro, Robert

2016-01-01

Units and classes dedicated to multiculturalism in Germany have predominantly focused on Turkish-German literature and culture. Afro-Germans have been a minority whose culture and literature have only marginally been included in German classes, even though Afro-Germans have been a part of Germany for centuries and have undergone efforts at…

Design of Synchrotron Light Source in Taiwan

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kuo, C. C.; Chang, H. P.; Chou, P. J.

2007-01-19

An intermediate energy synchrotron light source has been proposed. The goal is to construct a high performance light source in complementary to the existing 1.5 GeV synchrotron ring in Taiwan to boost the research capabilities. A 3 GeV machine with 518.4 m and 24-cell DBA lattice structure is considered and other options are also investigated. We report the 24-cell design considerations and its performances.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Davis, Lynn; Arquit Niederberger, Anne

Abstract— Lighting systems have the ability to transform the economic and educational infrastructure of disadvantaged communities, and eradicating “light poverty” has become one of the primary goals of the International Year of Light 2015. Solid-state lighting (SSL) technology, based on light-emitting diode (LED) light sources, has emerged as the next generation of lighting technology, with a current global market penetration of roughly 5%. This paper will report on recent research on understanding SSL lighting system reliability (failure modes, environmental stressors, electrical power quality); discuss the implications of SSL technology reliability for providing lighting services; and suggest practical approaches to ensuremore » SSL reliability to benefit humanity. Among the key findings from this work is that LED sources can be extremely reliable, withstanding a broad range of environmental stresses without failure. Nonetheless, SSL lighting systems can have a negative impact on electrical power reliability, as well as on the affordability of lighting services, without attention to the quality of the accompanying power infrastructure. It is therefore critical to ensure that the performance of the power supply electronics used in lighting systems is matched to the quality of the power source, when evaluating energy efficient lighting choices.« less

Photosynthetically supplemental lighting for vegetable crop production with super-bright laser diode

NASA Astrophysics Data System (ADS)

Hu, Yongguang; Li, Pingping; Shi, Jintong

2007-02-01

Although many artificial light sources like high-pressure sodium lamp, metal halide lamp, fluorescent lamp and so on are commonly used in horticulture, they are not widely applied because of the disadvantages of unreasonable spectra, high cost and complex control. Recently new light sources of light-emitting diode (LED) and laser diode (LD) are becoming more and more popular in the field of display and illumination with the improvement of material and manufacturing, long life-span and increasingly low cost. A new type of super-bright red LD (BL650, central wavelength is 650 nm) was selected to make up of the supplemental lighting panel, on which LDs were distributed with regular hexagon array. Drive circuit was designed to power it and adjust light intensity. System performance including temperature rise and light intensity distribution under different vertical/horizontal distances were tested. Photosynthesis of sweet pepper and eggplant leaf under LD was measured with LI-6400 to show the supplemental lighting effects. The results show that LD system can supply the maximum light intensity of 180 μmol/m2 •s at the distance of 50 mm below the panel and the temperature rise is little within 1 °C. Net photosynthetic rate became faster when LD system increased light intensity. Compared with sunlight and LED supplemental lighting system, LD's promotion on photosynthesis is in the middle. Thus it is feasible for LD light source to supplement light for vegetable crops. Further study would focus on the integration of LD and other artificial light sources.

Silane and germane plasma diagnostics for depositing photosensitive a-SiGe:H films

NASA Technical Reports Server (NTRS)

Shing, Y. H.; Perry, J. W.; Allevato, C. E.

1988-01-01

Highly photosensitive a-SiGe:H films with a light-to-dark conductivity ratio of 8 x 103 and an optical bandgap of 1.40 eV have been produced by RF glow discharge using hydrogen dilution of SiH4 and GeH4 mixed gas plasma. The critical role of hydrogen dilution in GeH4 containing plasmas is to suppress the gas-phase polymerization and promote the incorporation of Ge into the film. It is observed that inelastic laser light scattering of the RF plasma is a sensitive method for monitoring the onset of the gas-phase polymerization. In situ coherent anti-Stokes Raman spectroscopy measurements have shown that the dissociation rate of GeH4 is a factor of three larger than that of SiH4.

Circadian Behavioral Study: LED vs Cool White Fluorescent - 0.1, 1, 10, 40, 80 lux. Part 2

NASA Technical Reports Server (NTRS)

Holley, Daniel C.; Syrkin, N.; Mele, G.

2000-01-01

Currently, the light source most commonly used in animal habitat lighting is cool white fluorescent (CWF) light. It was the objective of this study to evaluate a novel LED light source for use in animal habitat lighting by comparing its effectiveness to CWF light in producing and maintaining a normal circadian entrainment. The LED and CWF lights had similar spectral power distributions. Sprague-Dawley rats (175-350 g) were kept individually in metabolic cages, under a strict lighting control: 4 days of acclimation at 12:12 LD, 14 days of 12:12 LD, 14 days of 24:0 LD (free-run), and finally 12:12 LD. Food and water were provided ad libitum. Three behavioral parameters were monitored continuously: gross locomotor activity, drinking, and feeding. Combined mean free run periods (tau) were (mean +/- SEM): 24.6 +/- 0.1 and 24.7 +/- 0.2 at 0.1 lux, 25.5 +/- 0.1 and 25.7 +/- 0.1 at 1.0 lux, 25.3 +/- 0.2 and 25.4 +/- 0.2 at 10 lux, 25.8 +/- 0.1 and 25.9 +/- 0.1 at 40 lux, and 25.9 +/- 0.1 and 25.9 +/- 0.1 at 80 lux, CWF and LED respectively. ANOVA found a significant effect (p < 0.05) due to light level, but no difference in tau between rats exposed to constant CWF light and rats exposed to constant LED light. This study has shown that LED light can produce the same entrainment pattern as a conventional CWT light at similar intensities (0.1, 1, 10, 40, and 80 lux). LED light sources may be a suitable replacement for conventional light sources used in animal habitat lighting while providing many mechanical and economical advantages.

Artificial light sources differ in effect on birch seedling growth

Treesearch

David A. Marquis

1965-01-01

The use of artificial lights to grow tree seedlings for research and even for commercial uses is becoming common. With this has come an increasing awareness that not all types of artificial lights produce the same results (2, 3, 5). The presence or absence of particular wavelengths in the light source may cause large differences in height growth and morphological...

Ultrafast Graphene Light Emitters.

PubMed

Kim, Young Duck; Gao, Yuanda; Shiue, Ren-Jye; Wang, Lei; Aslan, Ozgur Burak; Bae, Myung-Ho; Kim, Hyungsik; Seo, Dongjea; Choi, Heon-Jin; Kim, Suk Hyun; Nemilentsau, Andrei; Low, Tony; Tan, Cheng; Efetov, Dmitri K; Taniguchi, Takashi; Watanabe, Kenji; Shepard, Kenneth L; Heinz, Tony F; Englund, Dirk; Hone, James

2018-02-14

Ultrafast electrically driven nanoscale light sources are critical components in nanophotonics. Compound semiconductor-based light sources for the nanophotonic platforms have been extensively investigated over the past decades. However, monolithic ultrafast light sources with a small footprint remain a challenge. Here, we demonstrate electrically driven ultrafast graphene light emitters that achieve light pulse generation with up to 10 GHz bandwidth across a broad spectral range from the visible to the near-infrared. The fast response results from ultrafast charge-carrier dynamics in graphene and weak electron-acoustic phonon-mediated coupling between the electronic and lattice degrees of freedom. We also find that encapsulating graphene with hexagonal boron nitride (hBN) layers strongly modifies the emission spectrum by changing the local optical density of states, thus providing up to 460% enhancement compared to the gray-body thermal radiation for a broad peak centered at 720 nm. Furthermore, the hBN encapsulation layers permit stable and bright visible thermal radiation with electronic temperatures up to 2000 K under ambient conditions as well as efficient ultrafast electronic cooling via near-field coupling to hybrid polaritonic modes under electrical excitation. These high-speed graphene light emitters provide a promising path for on-chip light sources for optical communications and other optoelectronic applications.

Spectrally resolved laser interference microscopy

NASA Astrophysics Data System (ADS)

Butola, Ankit; Ahmad, Azeem; Dubey, Vishesh; Senthilkumaran, P.; Singh Mehta, Dalip

2018-07-01

We developed a new quantitative phase microscopy technique, namely, spectrally resolved laser interference microscopy (SR-LIM), with which it is possible to quantify multi-spectral phase information related to biological specimens without color crosstalk using a color CCD camera. It is a single shot technique where sequential switched on/off of red, green, and blue (RGB) wavelength light sources are not required. The method is implemented using a three-wavelength interference microscope and a customized compact grating based imaging spectrometer fitted at the output port. The results of the USAF resolution chart while employing three different light sources, namely, a halogen lamp, light emitting diodes, and lasers, are discussed and compared. The broadband light sources like the halogen lamp and light emitting diodes lead to stretching in the spectrally decomposed images, whereas it is not observed in the case of narrow-band light sources, i.e. lasers. The proposed technique is further successfully employed for single-shot quantitative phase imaging of human red blood cells at three wavelengths simultaneously without color crosstalk. Using the present technique, one can also use a monochrome camera, even though the experiments are performed using multi-color light sources. Finally, SR-LIM is not only limited to RGB wavelengths, it can be further extended to red, near infra-red, and infra-red wavelengths, which are suitable for various biological applications.

46 CFR 161.013-9 - Independent power source.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 46 Shipping 6 2010-10-01 2010-10-01 false Independent power source. 161.013-9 Section 161.013-9...: SPECIFICATIONS AND APPROVAL ELECTRICAL EQUIPMENT Electric Distress Light for Boats § 161.013-9 Independent power source. (a) Each independent power source must be capable of powering the light so that it meets the...

Hyperspectral microscopy to identify foodborne bacteria with optimum lighting source

USDA-ARS?s Scientific Manuscript database

Hyperspectral microscopy is an emerging technology for rapid detection of foodborne pathogenic bacteria. Since scattering spectral signatures from hyperspectral microscopic images (HMI) vary with lighting sources, it is important to select optimal lights. The objective of this study is to compare t...