Application of GIS Rapid Mapping Technology in Disaster Monitoring

NASA Astrophysics Data System (ADS)

Wang, Z.; Tu, J.; Liu, G.; Zhao, Q.

2018-04-01

With the rapid development of GIS and RS technology, especially in recent years, GIS technology and its software functions have been increasingly mature and enhanced. And with the rapid development of mathematical statistical tools for spatial modeling and simulation, has promoted the widespread application and popularization of quantization in the field of geology. Based on the investigation of field disaster and the construction of spatial database, this paper uses remote sensing image, DEM and GIS technology to obtain the data information of disaster vulnerability analysis, and makes use of the information model to carry out disaster risk assessment mapping.Using ArcGIS software and its spatial data modeling method, the basic data information of the disaster risk mapping process was acquired and processed, and the spatial data simulation tool was used to map the disaster rapidly.

State of the Art of the Landscape Architecture Spatial Data Model from a Geospatial Perspective

NASA Astrophysics Data System (ADS)

Kastuari, A.; Suwardhi, D.; Hanan, H.; Wikantika, K.

2016-10-01

Spatial data and information had been used for some time in planning or landscape design. For a long time, architects were using spatial data in the form of topographic map for their designs. This method is not efficient, and it is also not more accurate than using spatial analysis by utilizing GIS. Architects are sometimes also only accentuating the aesthetical aspect for their design, but not taking landscape process into account which could cause the design could be not suitable for its use and its purpose. Nowadays, GIS role in landscape architecture has been formalized by the emergence of Geodesign terminology that starts in Representation Model and ends in Decision Model. The development of GIS could be seen in several fields of science that now have the urgency to use 3 dimensional GIS, such as in: 3D urban planning, flood modeling, or landscape planning. In this fields, 3 dimensional GIS is able to support the steps in modeling, analysis, management, and integration from related data, that describe the human activities and geophysics phenomena in more realistic way. Also, by applying 3D GIS and geodesign in landscape design, geomorphology information can be better presented and assessed. In some research, it is mentioned that the development of 3D GIS is not established yet, either in its 3D data structure, or in its spatial analysis function. This study literature will able to accommodate those problems by providing information on existing development of 3D GIS for landscape architecture, data modeling, the data accuracy, representation of data that is needed by landscape architecture purpose, specifically in the river area.

Forest Ecosystem Analysis Using a GIS

Treesearch

S.G. McNulty; W.T. Swank

1996-01-01

Forest ecosystem studies have expanded spatially in recent years to address large scale environmental issues. We are using a geographic information system (GIS) to understand and integrate forest processes at landscape to regional spatial scales. This paper presents three diverse research studies using a GIS. First, we used a GIS to develop a landscape scale model to...

A Modular GIS-Based Software Architecture for Model Parameter Estimation using the Method of Anchored Distributions (MAD)

NASA Astrophysics Data System (ADS)

Ames, D. P.; Osorio-Murillo, C.; Over, M. W.; Rubin, Y.

2012-12-01

The Method of Anchored Distributions (MAD) is an inverse modeling technique that is well-suited for estimation of spatially varying parameter fields using limited observations and Bayesian methods. This presentation will discuss the design, development, and testing of a free software implementation of the MAD technique using the open source DotSpatial geographic information system (GIS) framework, R statistical software, and the MODFLOW groundwater model. This new tool, dubbed MAD-GIS, is built using a modular architecture that supports the integration of external analytical tools and models for key computational processes including a forward model (e.g. MODFLOW, HYDRUS) and geostatistical analysis (e.g. R, GSLIB). The GIS-based graphical user interface provides a relatively simple way for new users of the technique to prepare the spatial domain, to identify observation and anchor points, to perform the MAD analysis using a selected forward model, and to view results. MAD-GIS uses the Managed Extensibility Framework (MEF) provided by the Microsoft .NET programming platform to support integration of different modeling and analytical tools at run-time through a custom "driver." Each driver establishes a connection with external programs through a programming interface, which provides the elements for communicating with core MAD software. This presentation gives an example of adapting the MODFLOW to serve as the external forward model in MAD-GIS for inferring the distribution functions of key MODFLOW parameters. Additional drivers for other models are being developed and it is expected that the open source nature of the project will engender the development of additional model drivers by 3rd party scientists.

Analyzing rasters, vectors and time series using new Python interfaces in GRASS GIS 7

NASA Astrophysics Data System (ADS)

Petras, Vaclav; Petrasova, Anna; Chemin, Yann; Zambelli, Pietro; Landa, Martin; Gebbert, Sören; Neteler, Markus; Löwe, Peter

2015-04-01

GRASS GIS 7 is a free and open source GIS software developed and used by many scientists (Neteler et al., 2012). While some users of GRASS GIS prefer its graphical user interface, significant part of the scientific community takes advantage of various scripting and programing interfaces offered by GRASS GIS to develop new models and algorithms. Here we will present different interfaces added to GRASS GIS 7 and available in Python, a popular programming language and environment in geosciences. These Python interfaces are designed to satisfy the needs of scientists and programmers under various circumstances. PyGRASS (Zambelli et al., 2013) is a new object-oriented interface to GRASS GIS modules and libraries. The GRASS GIS libraries are implemented in C to ensure maximum performance and the PyGRASS interface provides an intuitive, pythonic access to their functionality. GRASS GIS Python scripting library is another way of accessing GRASS GIS modules. It combines the simplicity of Bash and the efficiency of the Python syntax. When full access to all low-level and advanced functions and structures from GRASS GIS library is required, Python programmers can use an interface based on the Python ctypes package. Ctypes interface provides complete, direct access to all functionality as it would be available to C programmers. GRASS GIS provides specialized Python library for managing and analyzing spatio-temporal data (Gebbert and Pebesma, 2014). The temporal library introduces space time datasets representing time series of raster, 3D raster or vector maps and allows users to combine various spatio-temporal operations including queries, aggregation, sampling or the analysis of spatio-temporal topology. We will also discuss the advantages of implementing scientific algorithm as a GRASS GIS module and we will show how to write such module in Python. To facilitate the development of the module, GRASS GIS provides a Python library for testing (Petras and Gebbert, 2014) which helps researchers to ensure the robustness of the algorithm, correctness of the results in edge cases as well as the detection of changes in results due to new development. For all modules GRASS GIS automatically creates standardized command line and graphical user interfaces and documentation. Finally, we will show how GRASS GIS can be used together with powerful Python tools such as the NumPy package and the IPython Notebook. References: Gebbert, S., Pebesma, E., 2014. A temporal GIS for field based environmental modeling. Environmental Modelling & Software 53, 1-12. Neteler, M., Bowman, M.H., Landa, M. and Metz, M., 2012. GRASS GIS: a multi-purpose Open Source GIS. Environmental Modelling & Software 31: 124-130. Petras, V., Gebbert, S., 2014. Testing framework for GRASS GIS: ensuring reproducibility of scientific geospatial computing. Poster presented at: AGU Fall Meeting, December 15-19, 2014, San Francisco, USA. Zambelli, P., Gebbert, S., Ciolli, M., 2013. Pygrass: An Object Oriented Python Application Programming Interface (API) for Geographic Resources Analysis Support System (GRASS) Geographic Information System (GIS). ISPRS International Journal of Geo-Information 2, 201-219.

The GIS weasel - An interface for the development of spatial information in modeling

USGS Publications Warehouse

Viger, R.J.; Markstrom, S.M.; Leavesley, G.H.; ,

2005-01-01

The GIS Weasel is a map and Graphical User Interface (GUI) driven tool that has been developed as an aid to modelers in the delineation, characterization of geographic features, and their parameterization for use in distributed or lumped parameter physical process models. The interface does not require user expertise in geographic information systems (GIS). The user does need knowledge of how the model will use the output from the GIS Weasel. The GIS Weasel uses Workstation ArcInfo and its the Grid extension. The GIS Weasel will run on all platforms that Workstation ArcInfo runs (i.e. numerous flavors of Unix and Microsoft Windows).The GIS Weasel requires an input ArcInfo grid of some topographical description of the Area of Interest (AOI). This is normally a digital elevation model, but can be the surface of a ground water table or any other data that flow direction can be resolved from. The user may define the AOI as a custom drainage area based on an interactively specified watershed outlet point, or use a previously created map. The user is then able to use any combination of the GIS Weasel's tool set to create one or more maps for depicting different kinds of geographic features. Once the spatial feature maps have been prepared, then the GIS Weasel s many parameterization routines can be used to create descriptions of each element in each of the user s created maps. Over 200 parameterization routines currently exist, generating information about shape, area, and topological association with other features of the same or different maps, as well many types of information based on ancillary data layers such as soil and vegetation properties. These tools easily integrate other similarly formatted data sets.

Geographic information system as country-level development and monitoring tool, Senegal example

USGS Publications Warehouse

Moore, Donald G.; Howard, Stephen M.; ,

1990-01-01

Geographic information systems (GIS) allow an investigator the capability to merge and analyze numerous types of country-level resource data. Hypothetical resource analysis applications in Senegal were conducted to illustrate the utility of a GIS for development planning and resource monitoring. Map and attribute data for soils, vegetation, population, infrastructure, and administrative units were merged to form a database within a GIS. Several models were implemented using a GIS to: analyze development potential for sustainable dryland agriculture; prioritize where agricultural development should occur based upon a regional food budget; and monitor dynamic events with remote sensing. The steps for implementing a GIS analysis are described and illustrated, and the use of a GIS for conducting an economic analysis is outlined. Using a GIS for analysis and display of results opens new methods of communication between resource scientists and decision makers. Analyses yielding country-wide map output and detailed statistical data for each level of administration provide the advantage of a single system that can serve a variety of users.

On-line applications of numerical models in the Black Sea GIS

NASA Astrophysics Data System (ADS)

Zhuk, E.; Khaliulin, A.; Zodiatis, G.; Nikolaidis, A.; Nikolaidis, M.; Stylianou, Stavros

2017-09-01

The Black Sea Geographical Information System (GIS) is developed based on cutting edge information technologies, and provides automated data processing and visualization on-line. Mapserver is used as a mapping service; the data are stored in MySQL DBMS; PHP and Python modules are utilized for data access, processing, and exchange. New numerical models can be incorporated in the GIS environment as individual software modules, compiled for a server-based operational system, providing interaction with the GIS. A common interface allows setting the input parameters; then the model performs the calculation of the output data in specifically predefined files and format. The calculation results are then passed to the GIS for visualization. Initially, a test scenario of integration of a numerical model into the GIS was performed, using software, developed to describe a two-dimensional tsunami propagation in variable basin depth, based on a linear long surface wave model which is legitimate for more than 5 m depth. Furthermore, the well established oil spill and trajectory 3-D model MEDSLIK (http://www.oceanography.ucy.ac.cy/medslik/) was integrated into the GIS with more advanced GIS functionality and capabilities. MEDSLIK is able to forecast and hind cast the trajectories of oil pollution and floating objects, by using meteo-ocean data and the state of oil spill. The MEDSLIK module interface allows a user to enter all the necessary oil spill parameters, i.e. date and time, rate of spill or spill volume, forecasting time, coordinates, oil spill type, currents, wind, and waves, as well as the specification of the output parameters. The entered data are passed on to MEDSLIK; then the oil pollution characteristics are calculated for pre-defined time steps. The results of the forecast or hind cast are then visualized upon a map.

A GIS-based multi-source and multi-box modeling approach (GMSMB) for air pollution assessment--a North American case study.

PubMed

Wang, Bao-Zhen; Chen, Zhi

2013-01-01

This article presents a GIS-based multi-source and multi-box modeling approach (GMSMB) to predict the spatial concentration distributions of airborne pollutant on local and regional scales. In this method, an extended multi-box model combined with a multi-source and multi-grid Gaussian model are developed within the GIS framework to examine the contributions from both point- and area-source emissions. By using GIS, a large amount of data including emission sources, air quality monitoring, meteorological data, and spatial location information required for air quality modeling are brought into an integrated modeling environment. It helps more details of spatial variation in source distribution and meteorological condition to be quantitatively analyzed. The developed modeling approach has been examined to predict the spatial concentration distribution of four air pollutants (CO, NO(2), SO(2) and PM(2.5)) for the State of California. The modeling results are compared with the monitoring data. Good agreement is acquired which demonstrated that the developed modeling approach could deliver an effective air pollution assessment on both regional and local scales to support air pollution control and management planning.

A GIS Tool for evaluating and improving NEXRAD and its application in distributed hydrologic modeling

NASA Astrophysics Data System (ADS)

Zhang, X.; Srinivasan, R.

2008-12-01

In this study, a user friendly GIS tool was developed for evaluating and improving NEXRAD using raingauge data. This GIS tool can automatically read in raingauge and NEXRAD data, evaluate the accuracy of NEXRAD for each time unit, implement several geostatistical methods to improve the accuracy of NEXRAD through raingauge data, and output spatial precipitation map for distributed hydrologic model. The geostatistical methods incorporated in this tool include Simple Kriging with varying local means, Kriging with External Drift, Regression Kriging, Co-Kriging, and a new geostatistical method that was newly developed by Li et al. (2008). This tool was applied in two test watersheds at hourly and daily temporal scale. The preliminary cross-validation results show that incorporating raingauge data to calibrate NEXRAD can pronouncedly change the spatial pattern of NEXRAD and improve its accuracy. Using different geostatistical methods, the GIS tool was applied to produce long term precipitation input for a distributed hydrologic model - Soil and Water Assessment Tool (SWAT). Animated video was generated to vividly illustrate the effect of using different precipitation input data on distributed hydrologic modeling. Currently, this GIS tool is developed as an extension of SWAT, which is used as water quantity and quality modeling tool by USDA and EPA. The flexible module based design of this tool also makes it easy to be adapted for other hydrologic models for hydrological modeling and water resources management.

From BIM to GIS at the Smithsonian Institution

NASA Astrophysics Data System (ADS)

Günther-Diringer, Detlef

2018-05-01

BIM-files (Building Information Models) are in modern architecture and building management a basic prerequisite for successful creation of construction engineering projects. At the facilities department of the Smithsonian Institution more than six hundred buildings were maintained. All facilities were digital available in an ESRI ArcGIS-environment with connection to the database information about single rooms with the usage and further maintenance information. These data are organization wide available by an intranet viewer, but only in a two-dimensional representation. Goal of the carried out project was the development of a workflow from available BIM-models to the given GIS-structure. The test-environment were the BIM-models of the buildings of the Smithsonian museums along the Washington Mall. Based on new software editions of Autodesk Revit, FME and ArcGIS Pro the workflow from BIM to the GIS-data structure of the Smithsonian was successfully developed and may be applied for the setup of the future 3D intranet viewer.

Development of a geotechnical GIS for subsurface characterization with three dimensional modeling capabilities.

DOT National Transportation Integrated Search

2006-06-01

The New Hampshire Department of Transportation initiated this research to develop a geographical information system (GIS) that : visualizes subsurface conditions three dimensionally by pulling together geotechnical data containing spatial references....

Integration of Watershed Model AnnAGNPS and Stream Network Model CCHE1D for the Development of a New GIS-Based BMP Planning Tool

USDA-ARS?s Scientific Manuscript database

This paper presents a new GIS-based Best Management Practice (BMP) Tool developed for watershed managers to assist in the decision making process by simulating various scenarios using various combinations of Best Management Practices (BMPs). The development of this BMPTool is based on the integratio...

Real-time GIS data model and sensor web service platform for environmental data management.

PubMed

Gong, Jianya; Geng, Jing; Chen, Zeqiang

2015-01-09

Effective environmental data management is meaningful for human health. In the past, environmental data management involved developing a specific environmental data management system, but this method often lacks real-time data retrieving and sharing/interoperating capability. With the development of information technology, a Geospatial Service Web method is proposed that can be employed for environmental data management. The purpose of this study is to determine a method to realize environmental data management under the Geospatial Service Web framework. A real-time GIS (Geographic Information System) data model and a Sensor Web service platform to realize environmental data management under the Geospatial Service Web framework are proposed in this study. The real-time GIS data model manages real-time data. The Sensor Web service platform is applied to support the realization of the real-time GIS data model based on the Sensor Web technologies. To support the realization of the proposed real-time GIS data model, a Sensor Web service platform is implemented. Real-time environmental data, such as meteorological data, air quality data, soil moisture data, soil temperature data, and landslide data, are managed in the Sensor Web service platform. In addition, two use cases of real-time air quality monitoring and real-time soil moisture monitoring based on the real-time GIS data model in the Sensor Web service platform are realized and demonstrated. The total time efficiency of the two experiments is 3.7 s and 9.2 s. The experimental results show that the method integrating real-time GIS data model and Sensor Web Service Platform is an effective way to manage environmental data under the Geospatial Service Web framework.

A study on spatial decision support systems for HIV/AIDS prevention based on COM GIS technology

NASA Astrophysics Data System (ADS)

Yang, Kun; Luo, Huasong; Peng, Shungyun; Xu, Quanli

2007-06-01

Based on the deeply analysis of the current status and the existing problems of GIS technology applications in Epidemiology, this paper has proposed the method and process for establishing the spatial decision support systems of AIDS epidemic prevention by integrating the COM GIS, Spatial Database, GPS, Remote Sensing, and Communication technologies, as well as ASP and ActiveX software development technologies. One of the most important issues for constructing the spatial decision support systems of AIDS epidemic prevention is how to integrate the AIDS spreading models with GIS. The capabilities of GIS applications in the AIDS epidemic prevention have been described here in this paper firstly. Then some mature epidemic spreading models have also been discussed for extracting the computation parameters. Furthermore, a technical schema has been proposed for integrating the AIDS spreading models with GIS and relevant geospatial technologies, in which the GIS and model running platforms share a common spatial database and the computing results can be spatially visualized on Desktop or Web GIS clients. Finally, a complete solution for establishing the decision support systems of AIDS epidemic prevention has been offered in this paper based on the model integrating methods and ESRI COM GIS software packages. The general decision support systems are composed of data acquisition sub-systems, network communication sub-systems, model integrating sub-systems, AIDS epidemic information spatial database sub-systems, AIDS epidemic information querying and statistical analysis sub-systems, AIDS epidemic dynamic surveillance sub-systems, AIDS epidemic information spatial analysis and decision support sub-systems, as well as AIDS epidemic information publishing sub-systems based on Web GIS.

Summaries of Minnehaha Creek Watershed District Plans/Studies/Reports

DTIC Science & Technology

2004-01-30

34+ Management of all wetland functional assessment data in a Microsoft Access© database "+ Development of a GIS wetland data management system "+ Recommendations...General Task B Design GIS -Based Decision Making Model: Scenario-Based $125,000 $125,000 Model of Landuse Hydro Data Monitoring Task C Water Quality...Landuse and Land cover data + Watershed GIS data layers + Flood Insurance Rate Maps + Proposed project locations + Stream miles, reaches and conditions

A web GIS based integrated flood assessment modeling tool for coastal urban watersheds

NASA Astrophysics Data System (ADS)

Kulkarni, A. T.; Mohanty, J.; Eldho, T. I.; Rao, E. P.; Mohan, B. K.

2014-03-01

Urban flooding has become an increasingly important issue in many parts of the world. In this study, an integrated flood assessment model (IFAM) is presented for the coastal urban flood simulation. A web based GIS framework has been adopted to organize the spatial datasets for the study area considered and to run the model within this framework. The integrated flood model consists of a mass balance based 1-D overland flow model, 1-D finite element based channel flow model based on diffusion wave approximation and a quasi 2-D raster flood inundation model based on the continuity equation. The model code is written in MATLAB and the application is integrated within a web GIS server product viz: Web Gram Server™ (WGS), developed at IIT Bombay, using Java, JSP and JQuery technologies. Its user interface is developed using open layers and the attribute data are stored in MySQL open source DBMS. The model is integrated within WGS and is called via Java script. The application has been demonstrated for two coastal urban watersheds of Navi Mumbai, India. Simulated flood extents for extreme rainfall event of 26 July, 2005 in the two urban watersheds of Navi Mumbai city are presented and discussed. The study demonstrates the effectiveness of the flood simulation tool in a web GIS environment to facilitate data access and visualization of GIS datasets and simulation results.

GIS and Geodatabase Disaster Risk for Spatial Planning

NASA Astrophysics Data System (ADS)

Hendriawan Nur, Wawan; Kumoro, Yugo; Susilowati, Yuliana

2018-02-01

The spatial planning in Indonesia needs to consider the information on the potential disaster. That is because disaster is a serious and detrimental problem that often occurs and causes casualties in some areas in Indonesia as well as inhibits the development. Various models and research were developed to calculate disaster risk assessment. GIS is a system for assembling, storing, analyzing, and displaying geographically referenced disaster. The information can be collaborated with geodatabases to model and to estimate disaster risk in an automated way. It also offers the possibility to customize most of the parameters used in the models. This paper describes a framework which can improve GIS and Geodatabase for the vulnerability, capacity or disaster risk assessment to support the spatial planning activities so they can be more adaptable. By using this framework, GIS application can be used in any location by adjusting variables or calculation methods without changing or rebuilding system from scratch.

Preparing Teachers to Use GIS: The Impact of a Hybrid Professional Development Program on Teachers' Use of GIS

NASA Astrophysics Data System (ADS)

Moore, Steven; Haviland, Don; Moore, William; Tran, Michael

2016-12-01

This article reports the findings of a 3-year study of a hybrid professional development program designed to prepare science and mathematics teachers to implement GIS in their classrooms. The study was conducted as part of the CoastLines Innovative Technology Experiences for Students and Teachers project funded by the National Science Foundation. Three cohorts of teachers participated in the program, with each participant receiving 40 h of synchronous online instruction and 80 h of in-person instruction and support over an 8-month period. Data from surveys of participants both before and after the program were analyzed using correlation, ordinary least squares, and ordered logit regression analyses. The analyses revealed increases in the self-reported frequency of GIS use and enhanced feelings of preparation, competence, community, and comfort with respect to using GIS for instruction. A composite index of all impact variables was positively influenced as well. The statistical analyses found a strong relationship between self-reported feelings of preparation and use of GIS. Some support was found for the idea that feelings of competence, community, and comfort were related to the teachers' sense of preparation. The findings suggest that a robust hybrid model of teacher professional development can prepare teachers to use GIS in their classrooms. More research is needed to understand how hybrid models influence the sociopsychological and other dimensions that support teachers' feelings of preparation to implement GIS.

Application of GIS Technology for Town Planning Tasks Solving

NASA Astrophysics Data System (ADS)

Kiyashko, G. A.

2017-11-01

For developing territories, one of the most actual town-planning tasks is to find out the suitable sites for building projects. The geographic information system (GIS) allows one to model complex spatial processes and can provide necessary effective tools to solve these tasks. We propose several GIS analysis models which can define suitable settlement allocations and select appropriate parcels for construction objects. We implement our models in the ArcGIS Desktop package and verify by application to the existing objects in Primorsky Region (Primorye Territory). These suitability models use several variations of the analysis method combinations and include various ways to resolve the suitability task using vector data and a raster data set. The suitability models created in this study can be combined, and one model can be integrated into another as its part. Our models can be updated by other suitability models for further detailed planning.

Study on the key technology of grain logistics tracking system

NASA Astrophysics Data System (ADS)

Zhen, Tong; Ge, Hongyi; Jiang, Yuying; Che, Yi

2010-07-01

In recent year, with the rapid development of GIS technology, more and more programming problems depend on the GIS technology and professional model system. The solution of auxiliary programming problem by using GIS technology, which has become very popular. GIS is an important tool and technology, that captures, stores, analyzes, manages, and presents data that are linked to location. A grain logistics distribution system based on GIS is established, which provides a visualization scheme during the process of grain circulation and supports users making decision and analyzing for grain logistics enterprise.

A GIS-based modeling system for petroleum waste management. Geographical information system.

PubMed

Chen, Z; Huang, G H; Li, J B

2003-01-01

With an urgent need for effective management of petroleum-contaminated sites, a GIS-aided simulation (GISSIM) system is presented in this study. The GISSIM contains two components: an advanced 3D numerical model and a geographical information system (GIS), which are integrated within a general framework. The modeling component undertakes simulation for the fate of contaminants in subsurface unsaturated and saturated zones. The GIS component is used in three areas throughout the system development and implementation process: (i) managing spatial and non-spatial databases; (ii) linking inputs, model, and outputs; and (iii) providing an interface between the GISSIM and its users. The developed system is applied to a North American case study. Concentrations of benzene, toluene, and xylenes in groundwater under a petroleum-contaminated site are dynamically simulated. Reasonable outputs have been obtained and presented graphically. They provide quantitative and scientific bases for further assessment of site-contamination impacts and risks, as well as decisions on practical remediation actions.

A large scale GIS geodatabase of soil parameters supporting the modeling of conservation practice alternatives in the United States

USDA-ARS?s Scientific Manuscript database

Water quality modeling requires across-scale support of combined digital soil elements and simulation parameters. This paper presents the unprecedented development of a large spatial scale (1:250,000) ArcGIS geodatabase coverage designed as a functional repository of soil-parameters for modeling an...

ESTIMATION OF GROUNDWATER POLLUTION POTENTIAL BY PESTICIDES IN MID-ATLANTIC COASTAL PLAIN WATERSHEDS

EPA Science Inventory

A simple GIS-based transport model to estimate the potential for groundwater pollution by pesticides has been developed within the ArcView GIS environment. The pesticide leaching analytical model, which is based on one-dimensional advective-dispersive-reactive (ADR) transport, ha...

GIS Learning Objects: An Approach to Content Aggregation

ERIC Educational Resources Information Center

Govorov, Michael; Gienko, Gennady

2013-01-01

Content development and maintenance of geographic information systems (GIS) related courses, especially designed for distance and online delivery, could be a tedious task even for an experienced instructor. The paper outlines application of abstract instructional design techniques for modeling course structure and developing corresponding course…

Automating the Fireshed Assessment Process with ArcGIS

Treesearch

Alan Ager; Klaus Barber

2006-01-01

A library of macros was developed to automate the Fireshed process within ArcGIS. The macros link a number of vegetation simulation and wildfire behavior models (FVS, SVS, FARSITE, and FlamMap) with ESRI geodatabases, desktop software (Access, Excel), and ArcGIS. The macros provide for (1) an interactive linkage between digital imagery, vegetation data, FVS-FFE, and...

Diverting the tourists: a spatial decision-support system for tourism planning on a developing island

NASA Astrophysics Data System (ADS)

Beedasy, Jaishree; Whyatt, Duncan

Mauritius is a small island (1865 km 2) in the Indian Ocean. Tourism is the third largest economic sector of the country, after manufacturing and agriculture. A limitation of space and the island's vulnerable ecosystem warrants a rational approach to tourism development. The main problems so far have been to manipulate and integrate all the factors affecting tourism planning and to match spatial data with their relevant attributes. A Spatial Decision Support System (SDSS) for sustainable tourism planning is therefore proposed. The proposed SDSS design would include a GIS as its core component. A first GIS model has already been constructed with available data. Supporting decision-making in a spatial context is implicit in the use of GIS. However the analytical capability of the GIS has to be enhanced to solve semi-structured problems, where subjective judgements come into play. The second part of the paper deals with the choice, implementation and customisation of a relevant model to develop a specialised SDSS. Different types of models and techniques are discussed, in particular a comparison of compensatory and non-compensatory approaches to multicriteria evaluation (MCE). It is concluded that compensatory multicriteria evaluation techniques increase the scope of the present GIS model as a decision-support tool. This approach gives the user or decision-maker the flexibility to change the importance of each criterion depending on relevant objectives.

Introducing a new open source GIS user interface for the SWAT model

USDA-ARS?s Scientific Manuscript database

The Soil and Water Assessment Tool (SWAT) model is a robust watershed modelling tool. It typically uses the ArcSWAT interface to create its inputs. ArcSWAT is public domain software which works in the licensed ArcGIS environment. The aim of this paper was to develop an open source user interface ...

WATGIS: A GIS-Based Lumped Parameter Water Quality Model

Treesearch

Glenn P. Fernandez; George M. Chescheir; R. Wayne Skaggs; Devendra M. Amatya

2002-01-01

A Geographic Information System (GIS)­based, lumped parameter water quality model was developed to estimate the spatial and temporal nitrogen­loading patterns for lower coastal plain watersheds in eastern North Carolina. The model uses a spatially distributed delivery ratio (DR) parameter to account for nitrogen retention or loss along a drainage network. Delivery...

Multistressor predictive models of invertebrate condition in the Corn Belt, USA

USGS Publications Warehouse

Waite, Ian R.; Van Metre, Peter C.

2017-01-01

Understanding the complex relations between multiple environmental stressors and ecological conditions in streams can help guide resource-management decisions. During 14 weeks in spring/summer 2013, personnel from the US Geological Survey and the US Environmental Protection Agency sampled 98 wadeable streams across the Midwest Corn Belt region of the USA for water and sediment quality, physical and habitat characteristics, and ecological communities. We used these data to develop independent predictive disturbance models for 3 macroinvertebrate metrics and a multimetric index. We developed the models based on boosted regression trees (BRT) for 3 stressor categories, land use/land cover (geographic information system [GIS]), all in-stream stressors combined (nutrients, habitat, and contaminants), and for GIS plus in-stream stressors. The GIS plus in-stream stressor models had the best overall performance with an average cross-validation R2 across all models of 0.41. The models were generally consistent in the explanatory variables selected within each stressor group across the 4 invertebrate metrics modeled. Variables related to riparian condition, substrate size or embeddedness, velocity and channel shape, nutrients (primarily NH3), and contaminants (pyrethroid degradates) were important descriptors of the invertebrate metrics. Models based on all measured in-stream stressors performed comparably to models based on GIS landscape variables, suggesting that the in-stream stressor characterization reasonably represents the dominant factors affecting invertebrate communities and that GIS variables are acting as surrogates for in-stream stressors that directly affect in-stream biota.

Adapting the iSNOBAL model for improved visualization in a GIS environment

NASA Astrophysics Data System (ADS)

Johansen, W. J.; Delparte, D.

2014-12-01

Snowmelt is a primary means of crucial water resources in much of the western United States. Researchers are developing models that estimate snowmelt to aid in water resource management. One such model is the image snowcover energy and mass balance (iSNOBAL) model. It uses input climate grids to simulate the development and melting of snowpack in mountainous regions. This study looks at applying this model to the Reynolds Creek Experimental Watershed in southwestern Idaho, utilizing novel approaches incorporating geographic information systems (GIS). To improve visualization of the iSNOBAL model, we have adapted it to run in a GIS environment. This type of environment is suited to both the input grid creation and the visualization of results. The data used for input grid creation can be stored locally or on a web-server. Kriging interpolation embedded within Python scripts are used to create air temperature, soil temperature, humidity, and precipitation grids, while built-in GIS and existing tools are used to create solar radiation and wind grids. Additional Python scripting is then used to perform model calculations. The final product is a user-friendly and accessible version of the iSNOBAL model, including the ability to easily visualize and interact with model results, all within a web- or desktop-based GIS environment. This environment allows for interactive manipulation of model parameters and visualization of the resulting input grids for the model calculations. Future work is moving towards adapting the model further for use in a 3D gaming engine for improved visualization and interaction.

RockFall analyst: A GIS extension for three-dimensional and spatially distributed rockfall hazard modeling

NASA Astrophysics Data System (ADS)

Lan, Hengxing; Derek Martin, C.; Lim, C. H.

2007-02-01

Geographic information system (GIS) modeling is used in combination with three-dimensional (3D) rockfall process modeling to assess rockfall hazards. A GIS extension, RockFall Analyst (RA), which is capable of effectively handling large amounts of geospatial information relative to rockfall behaviors, has been developed in ArcGIS using ArcObjects and C#. The 3D rockfall model considers dynamic processes on a cell plane basis. It uses inputs of distributed parameters in terms of raster and polygon features created in GIS. Two major components are included in RA: particle-based rockfall process modeling and geostatistics-based rockfall raster modeling. Rockfall process simulation results, 3D rockfall trajectories and their velocity features either for point seeders or polyline seeders are stored in 3D shape files. Distributed raster modeling, based on 3D rockfall trajectories and a spatial geostatistical technique, represents the distribution of spatial frequency, the flying and/or bouncing height, and the kinetic energy of falling rocks. A distribution of rockfall hazard can be created by taking these rockfall characteristics into account. A barrier analysis tool is also provided in RA to aid barrier design. An application of these modeling techniques to a case study is provided. The RA has been tested in ArcGIS 8.2, 8.3, 9.0 and 9.1.

A GIS-based decision support system for regional eco-security assessment and its application on the Tibetan Plateau.

PubMed

Xiaodan, Wang; Xianghao, Zhong; Pan, Gao

2010-10-01

Regional eco-security assessment is an intricate, challenging task. In previous studies, the integration of eco-environmental models and geographical information systems (GIS) usually takes two approaches: loose coupling and tight coupling. However, the present study used a full coupling approach to develop a GIS-based regional eco-security assessment decision support system (ESDSS). This was achieved by merging the pressure-state-response (PSR) model and the analytic hierarchy process (AHP) into ArcGIS 9 as a dynamic link library (DLL) using ArcObjects in ArcGIS and Visual Basic for Applications. Such an approach makes it easy to capitalize on the GIS visualization and spatial analysis functions, thereby significantly supporting the dynamic estimation of regional eco-security. A case study is presented for the Tibetan Plateau, known as the world's "third pole" after the Arctic and Antarctic. Results verified the usefulness and feasibility of the developed method. As a useful tool, the ESDSS can also help local managers to make scientifically-based and effective decisions about Tibetan eco-environmental protection and land use. Copyright (c) 2010 Elsevier Ltd. All rights reserved.

WebGIS based on semantic grid model and web services

NASA Astrophysics Data System (ADS)

Zhang, WangFei; Yue, CaiRong; Gao, JianGuo

2009-10-01

As the combination point of the network technology and GIS technology, WebGIS has got the fast development in recent years. With the restriction of Web and the characteristics of GIS, traditional WebGIS has some prominent problems existing in development. For example, it can't accomplish the interoperability of heterogeneous spatial databases; it can't accomplish the data access of cross-platform. With the appearance of Web Service and Grid technology, there appeared great change in field of WebGIS. Web Service provided an interface which can give information of different site the ability of data sharing and inter communication. The goal of Grid technology was to make the internet to a large and super computer, with this computer we can efficiently implement the overall sharing of computing resources, storage resource, data resource, information resource, knowledge resources and experts resources. But to WebGIS, we only implement the physically connection of data and information and these is far from the enough. Because of the different understanding of the world, following different professional regulations, different policies and different habits, the experts in different field will get different end when they observed the same geographic phenomenon and the semantic heterogeneity produced. Since these there are large differences to the same concept in different field. If we use the WebGIS without considering of the semantic heterogeneity, we will answer the questions users proposed wrongly or we can't answer the questions users proposed. To solve this problem, this paper put forward and experienced an effective method of combing semantic grid and Web Services technology to develop WebGIS. In this paper, we studied the method to construct ontology and the method to combine Grid technology and Web Services and with the detailed analysis of computing characteristics and application model in the distribution of data, we designed the WebGIS query system driven by ontology based on Grid technology and Web Services.

Incorporating GIS data into an agent-based model to support planning policy making for the development of creative industries

NASA Astrophysics Data System (ADS)

Liu, Helin; Silva, Elisabete A.; Wang, Qian

2016-07-01

This paper presents an extension to the agent-based model "Creative Industries Development-Urban Spatial Structure Transformation" by incorporating GIS data. Three agent classes, creative firms, creative workers and urban government, are considered in the model, and the spatial environment represents a set of GIS data layers (i.e. road network, key housing areas, land use). With the goal to facilitate urban policy makers to draw up policies locally and optimise the land use assignment in order to support the development of creative industries, the improved model exhibited its capacity to assist the policy makers conducting experiments and simulating different policy scenarios to see the corresponding dynamics of the spatial distributions of creative firms and creative workers across time within a city/district. The spatiotemporal graphs and maps record the simulation results and can be used as a reference by the policy makers to adjust land use plans adaptively at different stages of the creative industries' development process.

Integrating NASA's Land Analysis System (LAS) image processing software with an appropriate Geographic Information System (GIS): A review of candidates in the public domain

NASA Technical Reports Server (NTRS)

Rochon, Gilbert L.

1989-01-01

A user requirements analysis (URA) was undertaken to determine and appropriate public domain Geographic Information System (GIS) software package for potential integration with NASA's LAS (Land Analysis System) 5.0 image processing system. The necessity for a public domain system was underscored due to the perceived need for source code access and flexibility in tailoring the GIS system to the needs of a heterogenous group of end-users, and to specific constraints imposed by LAS and its user interface, Transportable Applications Executive (TAE). Subsequently, a review was conducted of a variety of public domain GIS candidates, including GRASS 3.0, MOSS, IEMIS, and two university-based packages, IDRISI and KBGIS. The review method was a modified version of the GIS evaluation process, development by the Federal Interagency Coordinating Committee on Digital Cartography. One IEMIS-derivative product, the ALBE (AirLand Battlefield Environment) GIS, emerged as the most promising candidate for integration with LAS. IEMIS (Integrated Emergency Management Information System) was developed by the Federal Emergency Management Agency (FEMA). ALBE GIS is currently under development at the Pacific Northwest Laboratory under contract with the U.S. Army Corps of Engineers' Engineering Topographic Laboratory (ETL). Accordingly, recommendations are offered with respect to a potential LAS/ALBE GIS linkage and with respect to further system enhancements, including coordination with the development of the Spatial Analysis and Modeling System (SAMS) GIS in Goddard's IDM (Intelligent Data Management) developments in Goddard's National Space Science Data Center.

Using digital databases to create geologic maps for the 21st century : a GIS model for geologic, environmental, cultural and transportation data from southern Rhode Island

DOT National Transportation Integrated Search

2002-05-01

Knowledge of surface and subsurface geology is fundamental to the planning and development of new or modified transportation systems. Toward this : end, we have compiled a model GIS database consisting of important geologic, cartographic, environment...

Using GIS Models to Identify Relative Nitrogen Attenuation by Riparian Buffers in the Coastal Plain of North Carolina

EPA Science Inventory

Riparian areas have demonstrated the ability to attenuate nutrients and provide water quality services at the field scale, but services of riparian buffers for downstream users should be assessed at watershed scales. GIS-based riparian models have been developed to connect ripari...

Spatial modeling of environmental vulnerability of marine finfish aquaculture using GIS-based neuro-fuzzy techniques.

PubMed

Navas, Juan Moreno; Telfer, Trevor C; Ross, Lindsay G

2011-08-01

Combining GIS with neuro-fuzzy modeling has the advantage that expert scientific knowledge in coastal aquaculture activities can be incorporated into a geospatial model to classify areas particularly vulnerable to pollutants. Data on the physical environment and its suitability for aquaculture in an Irish fjard, which is host to a number of different aquaculture activities, were derived from a three-dimensional hydrodynamic and GIS models. Subsequent incorporation into environmental vulnerability models, based on neuro-fuzzy techniques, highlighted localities particularly vulnerable to aquaculture development. The models produced an overall classification accuracy of 85.71%, with a Kappa coefficient of agreement of 81%, and were sensitive to different input parameters. A statistical comparison between vulnerability scores and nitrogen concentrations in sediment associated with salmon cages showed good correlation. Neuro-fuzzy techniques within GIS modeling classify vulnerability of coastal regions appropriately and have a role in policy decisions for aquaculture site selection. Copyright © 2011 Elsevier Ltd. All rights reserved.

A 125 year history of topographic mapping and GIS in the U.S. Geological Survey 1884-2009, part 2: 1980-2009

USGS Publications Warehouse

Usery, E. Lynn; Varanka, Dalia; Finn, Michael P.

2009-01-01

The United States Geological Survey (USGS) entered the mainstream of developments in computer-assisted technology for mapping during the 1970s. The introduction by USGS of digital line graphs (DLGs), digital elevation models (DEMs), and land use data analysis (LUDA) nationwide land-cover data provided a base for the rapid expansion of the use of GIS in the 1980s. Whereas USGS had developed the topologically structured DLG data and the Geographic Information Retrieval and Analysis System (GIRAS) for land-cover data, the Map Overlay Statistical System (MOSS), a nontopologically structured GIS software package developed by Autometric, Inc., under contract to the U.S. Fish and Wildlife Service, dominated the use of GIS by federal agencies in the 1970s. Thus, USGS data was used in MOSS, but the topological structure, which later became a requirement for GIS vector datasets, was not used in early GIS applications. The introduction of Esri's ARC/INFO in 1982 changed that, and by the end of the 1980s, topological structure for vector data was essential, and ARC/INFO was the dominant GIS software package used by federal agencies.

Application of GIS to modified models of vehicle emission dispersion

NASA Astrophysics Data System (ADS)

Jin, Taosheng; Fu, Lixin

This paper reports on a preliminary study of the forecast and evaluation of transport-related air pollution dispersion in urban areas. Some modifications of the traditional Gauss dispersion models are provided, and especially a crossroad model is built, which considers the great variation of vehicle emission attributed to different driving patterns at the crossroad. The above models are combined with a self-developed geographic information system (GIS) platform, and a simulative system with graphical interfaces is built. The system aims at visually describing the influences on the urban environment by urban traffic characteristics and therefore gives a reference to the improvement of urban air quality. Due to the introduction of a self-developed GIS platform and a creative crossroad model, the system is more effective, flexible and accurate. Finally, a comparison of the simulated (predicted) and observed hourly concentration is given, which indicates a good simulation.

Enhancing GIS Capabilities for High Resolution Earth Science Grids

NASA Astrophysics Data System (ADS)

Koziol, B. W.; Oehmke, R.; Li, P.; O'Kuinghttons, R.; Theurich, G.; DeLuca, C.

2017-12-01

Applications for high performance GIS will continue to increase as Earth system models pursue more realistic representations of Earth system processes. Finer spatial resolution model input and output, unstructured or irregular modeling grids, data assimilation, and regional coordinate systems present novel challenges for GIS frameworks operating in the Earth system modeling domain. This presentation provides an overview of two GIS-driven applications that combine high performance software with big geospatial datasets to produce value-added tools for the modeling and geoscientific community. First, a large-scale interpolation experiment using National Hydrography Dataset (NHD) catchments, a high resolution rectilinear CONUS grid, and the Earth System Modeling Framework's (ESMF) conservative interpolation capability will be described. ESMF is a parallel, high-performance software toolkit that provides capabilities (e.g. interpolation) for building and coupling Earth science applications. ESMF is developed primarily by the NOAA Environmental Software Infrastructure and Interoperability (NESII) group. The purpose of this experiment was to test and demonstrate the utility of high performance scientific software in traditional GIS domains. Special attention will be paid to the nuanced requirements for dealing with high resolution, unstructured grids in scientific data formats. Second, a chunked interpolation application using ESMF and OpenClimateGIS (OCGIS) will demonstrate how spatial subsetting can virtually remove computing resource ceilings for very high spatial resolution interpolation operations. OCGIS is a NESII-developed Python software package designed for the geospatial manipulation of high-dimensional scientific datasets. An overview of the data processing workflow, why a chunked approach is required, and how the application could be adapted to meet operational requirements will be discussed here. In addition, we'll provide a general overview of OCGIS's parallel subsetting capabilities including challenges in the design and implementation of a scientific data subsetter.

Bring NASA Scientific Data into GIS

NASA Astrophysics Data System (ADS)

Xu, H.

2016-12-01

NASA's Earth Observation System (EOS) and many other missions produce data of huge volume and near real time which drives the research and understanding of climate change. Geographic Information System (GIS) is a technology used for the management, visualization and analysis of spatial data. Since it's inception in the 1960s, GIS has been applied to many fields at the city, state, national, and world scales. People continue to use it today to analyze and visualize trends, patterns, and relationships from the massive datasets of scientific data. There is great interest in both the scientific and GIS communities in improving technologies that can bring scientific data into a GIS environment, where scientific research and analysis can be shared through the GIS platform to the public. Most NASA scientific data are delivered in the Hierarchical Data Format (HDF), a format is both flexible and powerful. However, this flexibility results in challenges when trying to develop supported GIS software - data stored with HDF formats lack a unified standard and convention among these products. The presentation introduces an information model that enables ArcGIS software to ingest NASA scientific data and create a multidimensional raster - univariate and multivariate hypercubes - for scientific visualization and analysis. We will present the framework how ArcGIS leverages the open source GDAL (Geospatial Data Abstract Library) to support its raster data access, discuss how we overcame the GDAL drivers limitations in handing scientific products that are stored with HDF4 and HDF5 formats and how we improve the way in modeling the multidimensionality with GDAL. In additional, we will talk about the direction of ArcGIS handling NASA products and demonstrate how the multidimensional information model can help scientists work with various data products such as MODIS, MOPPIT, SMAP as well as many data products in a GIS environment.

Towards an integrated approach to natural hazards risk assessment using GIS: with reference to bushfires.

PubMed

Chen, Keping; Blong, Russell; Jacobson, Carol

2003-04-01

This paper develops a GIS-based integrated approach to risk assessment in natural hazards, with reference to bushfires. The challenges for undertaking this approach have three components: data integration, risk assessment tasks, and risk decision-making. First, data integration in GIS is a fundamental step for subsequent risk assessment tasks and risk decision-making. A series of spatial data integration issues within GIS such as geographical scales and data models are addressed. Particularly, the integration of both physical environmental data and socioeconomic data is examined with an example linking remotely sensed data and areal census data in GIS. Second, specific risk assessment tasks, such as hazard behavior simulation and vulnerability assessment, should be undertaken in order to understand complex hazard risks and provide support for risk decision-making. For risk assessment tasks involving heterogeneous data sources, the selection of spatial analysis units is important. Third, risk decision-making concerns spatial preferences and/or patterns, and a multicriteria evaluation (MCE)-GIS typology for risk decision-making is presented that incorporates three perspectives: spatial data types, data models, and methods development. Both conventional MCE methods and artificial intelligence-based methods with GIS are identified to facilitate spatial risk decision-making in a rational and interpretable way. Finally, the paper concludes that the integrated approach can be used to assist risk management of natural hazards, in theory and in practice.

Simulating Spatial Growth Patterns in Developing Countries: A Case of Shama in the Western Region of Ghana.

NASA Astrophysics Data System (ADS)

Inkoom, J. N.; Nyarko, B. K.

2014-12-01

The integration of geographic information systems (GIS) and agent-based modelling (ABM) can be an efficient tool to improve spatial planning practices. This paper utilizes GIS and ABM approaches to simulate spatial growth patterns of settlement structures in Shama. A preliminary household survey on residential location decision-making choice served as the behavioural rule for household agents in the model. Physical environment properties of the model were extracted from a 2005 image implemented in NetLogo. The resulting growth pattern model was compared with empirical growth patterns to ascertain the model's accuracy. The paper establishes that the development of unplanned structures and its evolving structural pattern are a function of land price, proximity to economic centres, household economic status and location decision-making patterns. The application of the proposed model underlines its potential for integration into urban planning policies and practices, and for understanding residential decision-making processes in emerging cities in developing countries. Key Words: GIS; Agent-based modelling; Growth patterns; NetLogo; Location decision making; Computational Intelligence.

A data-based conservation planning tool for Florida panthers

USGS Publications Warehouse

Murrow, Jennifer L.; Thatcher, Cindy A.; Van Manen, Frank T.; Clark, Joseph D.

2013-01-01

Habitat loss and fragmentation are the greatest threats to the endangered Florida panther (Puma concolor coryi). We developed a data-based habitat model and user-friendly interface so that land managers can objectively evaluate Florida panther habitat. We used a geographic information system (GIS) and the Mahalanobis distance statistic (D2) to develop a model based on broad-scale landscape characteristics associated with panther home ranges. Variables in our model were Euclidean distance to natural land cover, road density, distance to major roads, human density, amount of natural land cover, amount of semi-natural land cover, amount of permanent or semi-permanent flooded area–open water, and a cost–distance variable. We then developed a Florida Panther Habitat Estimator tool, which automates and replicates the GIS processes used to apply the statistical habitat model. The estimator can be used by persons with moderate GIS skills to quantify effects of land-use changes on panther habitat at local and landscape scales. Example applications of the tool are presented.

Modeling wind energy potential in a data-poor region: A geographic information systems model for Iraq

NASA Astrophysics Data System (ADS)

Khayyat, Abdulkareem Hawta Abdullah Kak Ahmed

Scope and Method of Study: Most developing countries, including Iraq, have very poor wind data. Existing wind speed measurements of poor quality may therefore be a poor guide to where to look for the best wind resources. The main focus of this study is to examine how effectively a GIS spatial model estimates wind power potential in regions where high-quality wind data are very scarce, such as Iraq. The research used a mixture of monthly and hourly wind data from 39 meteorological stations. The study applied spatial analysis statistics and GIS techniques in modeling wind power potential. The model weighted important human, environmental and geographic factors that impact wind turbine siting, such as roughness length, land use⪉nd cover type, airport locations, road access, transmission lines, slope and aspect. Findings and Conclusions: The GIS model provided estimations for wind speed and wind power density and identified suitable areas for wind power projects. Using a high resolution (30*30m) digital elevation model DEM improved the GIS wind suitability model. The model identified areas suitable for wind farm development on different scales. The model showed that there are many locations available for large-scale wind turbines in the southern part of Iraq. Additionally, there are many places in central and northern parts (Kurdistan Region) for smaller scale wind turbine placement.

Evolution of a Greenland Ice sheet Including Shelves and Regional Sea Level Variations

NASA Astrophysics Data System (ADS)

Bradley, Sarah; Reerink, Thomas; van de Wal, Roderik S. W.; Helsen, Michiel; Goelzer, Heiko

2016-04-01

Observational evidence, including offshore moraines and marine sediment cores infer that at the Last Glacial maximum (LGM) the Greenland ice sheet (GIS) grounded out across the Davis Strait into Baffin Bay, with fast flowing ice streams extending out to the continental shelf break along the NW margin. These observations lead to a number of questions as to weather the GIS and Laurentide ice sheet (LIS) coalesced during glacial maximums, and if so, did a significant ice shelf develop across Baffin Bay and how would such a configuration impact on the relative contribution of these ice sheets to eustatic sea level (ESL). Most previous paleo ice sheet modelling simulations of the GIS recreated an ice sheet that either did not extend out onto the continental shelf or utilised a simplified marine ice parameterisation to recreate an extended GIS, and therefore did not fully include ice shelf dynamics. In this study we simulate the evolution of the GIS from 220 kyr BP to present day using IMAU-ice; a 3D thermodynamical ice sheet model which fully accounts for grounded and floating ice, calculates grounding line migration and ice shelf dynamics. As there are few observational estimates of the long-term (yrs) sub marine basal melting rates (mbm) for the GIS, we developed a mbm parameterization within IMAU-ice controlled primarily by changes in paleo water depth. We also investigate the influence of the LIS on the GIS evolution by including relative sea level forcing's derived from a Glacial Isostatic Adjustment model. We will present results of how changes in the mbm directly impacts on the ice sheet dynamics, timing and spatial extent of the GIS at the glacial maximums, but also on the rate of retreat and spatial extent at the Last interglacial (LIG) minimum. Results indicate that with the inclusion of ice shelf dynamics, a larger GIS is generated which is grounded out into Davis strait, up to a water depth of -750 m, but significantly reduces the GIS contribution to Last interglacial ESL.

Three-dimensional GIS approach for management of assets

NASA Astrophysics Data System (ADS)

Lee, S. Y.; Yee, S. X.; Majid, Z.; Setan, H.

2014-02-01

Assets play an important role in human life, especially to an organization. Organizations strive and put more effort to improve its operation and assets management. The development of GIS technology has become a powerful tool in management as it is able to provide a complete inventory for managing assets with location-based information. Spatial information is one of the requirements in decision making in various areas, including asset management in the buildings. This paper describes a 3D GIS approach for management of assets. An asset management system was developed by integrating GIS concept and 3D model assets. The purposes of 3D visualization to manage assets are to facilitate the analysis and understanding in the complex environment. Behind the 3D model of assets is a database to store the asset information. A user-friendly interface was also designed for more easier to operate the application. In the application developed, location of each individual asset can be easily tracked according to the referring spatial information and 3D viewing. The 3D GIS approach described in this paper is certainly would be useful in asset management. Systematic management of assets can be carried out and this will lead to less-time consuming and cost-effective. The results in this paper will show a new approach to improve asset management.

A spatiotemporal data model for incorporating time in geographic information systems (GEN-STGIS)

NASA Astrophysics Data System (ADS)

Narciso, Flor Eugenia

Temporal Geographic Information Systems (TGIS) is a new technology, which is being developed to work with Geographic Information Systems (GIS) that deal with geographic phenomena that change over time. The capabilities of TGIS depend on the underlying data model. However, a literature review of current spatiotemporal GIS data models has shown that they are not adequate for managing time when representing temporal data. In addition, the majority of these data models have been designed to support the requirements of specific-purpose applications. In an effort to resolve this problem, the related literature has been explored. A comparative investigation of the current spatiotemporal GIS data models has been made to identify their characteristics, advantages and disadvantages, similarities and differences, and to determine why they do not work adequately. A new object-oriented General-purpose Spatiotemporal GIS (GEN-STGIS) data model is proposed here. This model provides better representation, storage and management of data related to geographic phenomena that change over time and overcomes some of the problems detected in the reviewed data models. The proposed data model has four key benefits. First, it provides the capabilities of a standard vector-based GIS embedded in the 2-D Euclidean space. Second, it includes the two temporal dimensions, valid time and transaction time, supported by temporal databases. Third, it inherits, from the object oriented approach, the flexibility, modularity and ability to handle the complexities introduced by spatial and temporal dimensions. Fourth, it improves the geographic query capabilities of current TGIS with the introduction of the concept of bounding box while providing temporal and spatiotemporal query capabilities. The data model is then evaluated in order to assess its strengths and weaknesses as a spatiotemporal GIS data model, and to determine how well the model satisfies the requirements imposed by TGIS applications. The practicality of the data model is demonstrated by the creation of a TGIS example and the partial implementation of the model using the POET Java software for developing the object-oriented database. the object-oriented database.

Mapping and monitoring Mt. Graham Red Squirrel habitat with GIS and thematic mapper imagery

USGS Publications Warehouse

Hatten, James R.; Koprowski, John L.; Sanderson, H. Reed; Koprowski, John L.

2009-01-01

To estimate the Mt. Graham red squirrel (MGRS) population, personnel visit a proportion of middens each year to determine their occupancy (Snow in this vol.). The method results in very tight confidence intervals (high precision), but the accuracy of the population estimate is dependent upon knowing where all the middens are located. I hypothesized that there might be areas outside the survey boundary that contained Mt. Graham red squirrel middens, but the ruggedness of the Pinaleno Mountains made mountain-wide surveys difficult. Therefore, I started exploring development of a spatially explicit (geographic information system [GIS]-based) habitat model in 1998 that could identify MGRS habitat remotely with satellite imagery and a GIS. A GIS-based model would also allow us to assess changes in MGRS habitat between two time periods because Landsat passes over the same location every 16 days, imaging the earth in 185 km swaths (Aronoff 1989). Specifically, the objectives of this analysis were to (1) develop a pattern recognition model for MGRS habitat, (2) map potential (predicted/modeled) MGRS habitat, (3) identify changes in potential MGRS habitat between 1993 and 2003, and (4) evaluate the current location of the MGRS survey boundary.

Modeling of geoelectric parameters for assessing groundwater potentiality in a multifaceted geologic terrain, Ipinsa Southwest, Nigeria - A GIS-based GODT approach

NASA Astrophysics Data System (ADS)

Mogaji, Kehinde Anthony; Omobude, Osayande Bright

2017-12-01

Modeling of groundwater potentiality zones is a vital scheme for effective management of groundwater resources. This study developed a new multi-criteria decision making algorithm for groundwater potentiality modeling through modifying the standard GOD model. The developed model christened as GODT model was applied to assess groundwater potential in a multi-faceted crystalline geologic terrain, southwestern, Nigeria using the derived four unify groundwater potential conditioning factors namely: Groundwater hydraulic confinement (G), aquifer Overlying strata resistivity (O), Depth to water table (D) and Thickness of aquifer (T) from the interpreted geophysical data acquired in the area. With the developed model algorithm, the GIS-based produced G, O, D and T maps were synthesized to estimate groundwater potential index (GWPI) values for the area. The estimated GWPI values were processed in GIS environment to produce groundwater potential prediction index (GPPI) map which demarcate the area into four potential zones. The produced GODT model-based GPPI map was validated through application of both correlation technique and spatial attribute comparative scheme (SACS). The performance of the GODT model was compared with that of the standard analytic hierarchy process (AHP) model. The correlation technique results established 89% regression coefficients for the GODT modeling algorithm compared with 84% for the AHP model. On the other hand, the SACS validation results for the GODT and AHP models are 72.5% and 65%, respectively. The overall results indicate that both models have good capability for predicting groundwater potential zones with the GIS-based GODT model as a good alternative. The GPPI maps produced in this study can form part of decision making model for environmental planning and groundwater management in the area.

GIS-based analysis and modelling with empirical and remotely-sensed data on coastline advance and retreat

NASA Astrophysics Data System (ADS)

Ahmad, Sajid Rashid

With the understanding that far more research remains to be done on the development and use of innovative and functional geospatial techniques and procedures to investigate coastline changes this thesis focussed on the integration of remote sensing, geographical information systems (GIS) and modelling techniques to provide meaningful insights on the spatial and temporal dynamics of coastline changes. One of the unique strengths of this research was the parameterization of the GIS with long-term empirical and remote sensing data. Annual empirical data from 1941--2007 were analyzed by the GIS, and then modelled with statistical techniques. Data were also extracted from Landsat TM and ETM+ images. The band ratio method was used to extract the coastlines. Topographic maps were also used to extract digital map data. All data incorporated into ArcGIS 9.2 were analyzed with various modules, including Spatial Analyst, 3D Analyst, and Triangulated Irregular Networks. The Digital Shoreline Analysis System was used to analyze and predict rates of coastline change. GIS results showed the spatial locations along the coast that will either advance or retreat over time. The linear regression results highlighted temporal changes which are likely to occur along the coastline. Box-Jenkins modelling procedures were utilized to determine statistical models which best described the time series (1941--2007) of coastline change data. After several iterations and goodness-of-fit tests, second-order spatial cyclic autoregressive models, first-order autoregressive models and autoregressive moving average models were identified as being appropriate for describing the deterministic and random processes operating in Guyana's coastal system. The models highlighted not only cyclical patterns in advance and retreat of the coastline, but also the existence of short and long-term memory processes. Long-term memory processes could be associated with mudshoal propagation and stabilization while short-term memory processes were indicative of transitory hydrodynamic and other processes. An innovative framework for a spatio-temporal information-based system (STIBS) was developed. STIBS incorporated diverse datasets within a GIS, dynamic computer-based simulation models, and a spatial information query and graphical subsystem. Tests of the STIBS proved that it could be used to simulate and visualize temporal variability in shifting morphological states of the coastline.

GIS modeling of archaeological site locations: A low-tech approach

NASA Technical Reports Server (NTRS)

Futato, Eugene M.

1991-01-01

A Geographic Information System (GIS)-type analysis of archaeological site locations using a dBase III plus program and a desk top computer is presented. A previously developed model of site locations in the Sequatchie Valley of northeastern Alabama is tested against known site locations in another large survey area there. The model fails to account for site locations in the test area. A model is developed for the test area and indicates the site locations are indeed different. Whether this is due to differences in site locations on a sub-regional level, or to sample error in the original model is unknown.

Spatial modeling of the geographic distribution of wildlife populations: A case study in the lower Mississippi River region

USGS Publications Warehouse

Ji, W.; Jeske, C.

2000-01-01

A geographic information system (GIS)-based spatial modeling approach was developed to study environmental and land use impacts on the geographic distribution of wintering northern pintails (Arias acuta) in the Lower Mississippi River region. Pintails were fitted with backpack radio transmitter packages at Catahoula Lake, LA, in October 1992-1994 and located weekly through the following March. Pintail survey data were converted into a digital database in ARC/INFO GIS format and integrated with environmental GIS data through a customized modeling interface. The study verified the relationship between pintail distributions and major environmental factors and developed a conceptual relation model. Visualization-based spatial simulations were used to display the movement patterns of specific population groups under spatial and temporal constraints. The spatial modeling helped understand the seasonal movement patterns of pintails in relation to their habitat usage in Arkansas and southwestern Louisiana for wintering and interchange situations among population groups wintering in Texas and southeastern Louisiana. (C) 2000 Elsevier Science B.V.

Development of a GIS-based spill management information system.

PubMed

Martin, Paul H; LeBoeuf, Eugene J; Daniel, Edsel B; Dobbins, James P; Abkowitz, Mark D

2004-08-30

Spill Management Information System (SMIS) is a geographic information system (GIS)-based decision support system designed to effectively manage the risks associated with accidental or intentional releases of a hazardous material into an inland waterway. SMIS provides critical planning and impact information to emergency responders in anticipation of, or following such an incident. SMIS couples GIS and database management systems (DBMS) with the 2-D surface water model CE-QUAL-W2 Version 3.1 and the air contaminant model Computer-Aided Management of Emergency Operations (CAMEO) while retaining full GIS risk analysis and interpretive capabilities. Live 'real-time' data links are established within the spill management software to utilize current meteorological information and flowrates within the waterway. Capabilities include rapid modification of modeling conditions to allow for immediate scenario analysis and evaluation of 'what-if' scenarios. The functionality of the model is illustrated through a case study of the Cheatham Reach of the Cumberland River near Nashville, TN.

Towards AN Integration of GIS and Bim Data: what are the Geometric and Topological Issues?

NASA Astrophysics Data System (ADS)

Arroyo Ohori, K.; Biljecki, F.; Diakité, A.; Krijnen, T.; Ledoux, H.; Stoter, J.

2017-10-01

Geographic information and building information modelling both model buildings and infrastructure, but the way in which they are modelled is usually complimentary and BIM-GIS integration is widely considered as a way forward for both domains. For one, more detailed BIM data can feed more general GIS data and GIS data can provide the context that is necessary to BIM data. While previous studies have focused on the theoretical aspects of such an integration at a schema level, in this paper we focus on explaining the geometric and topological issues we have found while trying to develop software to realise such an integration in practice and at a data level. In our preliminary results, which are presented here, we have found that many issues for such an integration remain: handling the geometric and topological problems in BIM models, dealing with bad georeferencing and figuring out the best way to convert data between IFC and CityGML are all open issues.

Environmental analysis using integrated GIS and remotely sensed data - Some research needs and priorities

NASA Technical Reports Server (NTRS)

Davis, Frank W.; Quattrochi, Dale A.; Ridd, Merrill K.; Lam, Nina S.-N.; Walsh, Stephen J.

1991-01-01

This paper discusses some basic scientific issues and research needs in the joint processing of remotely sensed and GIS data for environmental analysis. Two general topics are treated in detail: (1) scale dependence of geographic data and the analysis of multiscale remotely sensed and GIS data, and (2) data transformations and information flow during data processing. The discussion of scale dependence focuses on the theory and applications of spatial autocorrelation, geostatistics, and fractals for characterizing and modeling spatial variation. Data transformations during processing are described within the larger framework of geographical analysis, encompassing sampling, cartography, remote sensing, and GIS. Development of better user interfaces between image processing, GIS, database management, and statistical software is needed to expedite research on these and other impediments to integrated analysis of remotely sensed and GIS data.

Customer-experienced rapid prototyping

NASA Astrophysics Data System (ADS)

Zhang, Lijuan; Zhang, Fu; Li, Anbo

2008-12-01

In order to describe accurately and comprehend quickly the perfect GIS requirements, this article will integrate the ideas of QFD (Quality Function Deployment) and UML (Unified Modeling Language), and analyze the deficiency of prototype development model, and will propose the idea of the Customer-Experienced Rapid Prototyping (CE-RP) and describe in detail the process and framework of the CE-RP, from the angle of the characteristics of Modern-GIS. The CE-RP is mainly composed of Customer Tool-Sets (CTS), Developer Tool-Sets (DTS) and Barrier-Free Semantic Interpreter (BF-SI) and performed by two roles of customer and developer. The main purpose of the CE-RP is to produce the unified and authorized requirements data models between customer and software developer.

The design and implementation of urban earthquake disaster loss evaluation and emergency response decision support systems based on GIS

NASA Astrophysics Data System (ADS)

Yang, Kun; Xu, Quan-li; Peng, Shuang-yun; Cao, Yan-bo

2008-10-01

Based on the necessity analysis of GIS applications in earthquake disaster prevention, this paper has deeply discussed the spatial integration scheme of urban earthquake disaster loss evaluation models and visualization technologies by using the network development methods such as COM/DCOM, ActiveX and ASP, as well as the spatial database development methods such as OO4O and ArcSDE based on ArcGIS software packages. Meanwhile, according to Software Engineering principles, a solution of Urban Earthquake Emergency Response Decision Support Systems based on GIS technologies have also been proposed, which include the systems logical structures, the technical routes,the system realization methods and function structures etc. Finally, the testing systems user interfaces have also been offered in the paper.

The Integration of GPR, GIS, and GPS for 3D Soil Morphologic Models

NASA Astrophysics Data System (ADS)

Tischler, M.; Collins, M. E.

2005-05-01

Ground-Penetrating Radar (GPR) has become a useful and efficient instrument for gathering information about subsurface diagnostic horizons in Florida soils. Geographic Information Systems (GIS) are a popular and valuable tool for spatial data analysis of real world features in a digital environment. Ground-Penetrating Radar can be linked to GIS by using Global Positioning Systems (GPS). By combining GPR, GPS, and GIS technologies, a more detailed geophysical survey can be completed for an area of interest by integratinghydrologic, pedologic, and geologic data. Thus, the objectives of this research were to identify subsurface soil layers using GPR and their geographic position with a highly accurate GPS; to develop a procedure to import GPR data into a popular software package, such as ArcGIS, and; to create 3D subsurface models based on the imported GPR data. The site for this study was the Plant Science Research and Education Center in Marion County, Florida. The soils are characterized by Recent-Pleistocene-age sand over the clayey, marine deposited Plio-Miocene-age Hawthorn Formation which drapes the Eocene-age Ocala Limestone. Consequently, soils in the research area vary from deep quartz sands (Typic Quartzipsamments) to shallow outcrops of the Hawthorn Formation (Arenic Hapludalfs). A GPR survey was performed on a 160 m x 320 m grid to gather data for processing. Four subsurface models estimating the depth to argillic horizon were created using a variety of specialized GPR data filters and geostatistical data analyses. The models were compared with ground-truth points that measured the depth to argillic horizon to validate each model and calculate error metrics. These models may assist research station personnel to determine best management practices (including experimental plot placement, irrigation management, fertilizer treatment, and pesticide applications). In addition, the developed methodology exploits the potential of combining GPR and GIS.

GIS embedded hydrological modeling: the SID&GRID project

NASA Astrophysics Data System (ADS)

Borsi, I.; Rossetto, R.; Schifani, C.

2012-04-01

The SID&GRID research project, started April 2010 and funded by Regione Toscana (Italy) under the POR FSE 2007-2013, aims to develop a Decision Support System (DSS) for water resource management and planning based on open source and public domain solutions. In order to quantitatively assess water availability in space and time and to support the planning decision processes, the SID&GRID solution consists of hydrological models (coupling 3D existing and newly developed surface- and ground-water and unsaturated zone modeling codes) embedded in a GIS interface, applications and library, where all the input and output data are managed by means of DataBase Management System (DBMS). A graphical user interface (GUI) to manage, analyze and run the SID&GRID hydrological models based on open source gvSIG GIS framework (Asociación gvSIG, 2011) and a Spatial Data Infrastructure to share and interoperate with distributed geographical data is being developed. Such a GUI is thought as a "master control panel" able to guide the user from pre-processing spatial and temporal data, running the hydrological models, and analyzing the outputs. To achieve the above-mentioned goals, the following codes have been selected and are being integrated: 1. Postgresql/PostGIS (PostGIS, 2011) for the Geo Data base Management System; 2. gvSIG with Sextante (Olaya, 2011) geo-algorithm library capabilities and Grass tools (GRASS Development Team, 2011) for the desktop GIS; 3. Geoserver and Geonetwork to share and discover spatial data on the web according to Open Geospatial Consortium; 4. new tools based on the Sextante GeoAlgorithm framework; 5. MODFLOW-2005 (Harbaugh, 2005) groundwater modeling code; 6. MODFLOW-LGR (Mehl and Hill 2005) for local grid refinement; 7. VSF (Thoms et al., 2006) for the variable saturated flow component; 8. new developed routines for overland flow; 9. new algorithms in Jython integrated in gvSIG to compute the net rainfall rate reaching the soil surface, as input for the unsaturated/saturated flow model. At this stage of the research (which will end April 2013), two primary components of the master control panel are being developed: i. a SID&GRID toolbar integrated into gvSIG map context; ii. a new Sextante set of geo-algorithm to pre- and post-process the spatial data to run the hydrological models. The groundwater part of the code has been fully integrated and tested and 3D visualization tools are being developed. The LGR capability has been extended to the 3D solution of the Richards' equation in order to solve in detail the unsaturated zone where required. To be updated about the project, please follow us at the website: http://ut11.isti.cnr.it/SIDGRID/

A GIS planning model for urban oil spill management.

PubMed

Li, J

2001-01-01

Oil spills in industrialized cities pose a significant threat to their urban water environment. The largest city in Canada, the city of Toronto, has an average 300-500 oil spills per year with an average total volume of about 160,000 L/year. About 45% of the spills was eventually cleaned up. Given the enormous amount of remaining oil entering into the fragile urban ecosystem, it is important to develop an effective pollution prevention and control plan for the city. A Geographic Information System (GIS) planning model has been developed to characterize oil spills and determine preventive and control measures available in the city. A database of oil spill records from 1988 to 1997 was compiled and geo-referenced. Attributes to each record such as spill volume, oil type, location, road type, sector, source, cleanup percentage, and environmental impacts were created. GIS layers of woodlots, wetlands, watercourses, Environmental Sensitive Areas, and Areas of Natural and Scientific Interest were obtained from the local Conservation Authority. By overlaying the spill characteristics with the GIS layers, evaluation of preventive and control solutions close to these environmental features was conducted. It was found that employee training and preventive maintenance should be improved as the principal cause of spills was attributed to human errors and equipment failure. Additionally, the cost of using oil separators at strategic spill locations was found to be $1.4 million. The GIS model provides an efficient planning tool for urban oil spill management. Additionally, the graphical capability of GIS allows users to integrate environmental features and spill characteristics in the management analysis.

Monitoring Method of Cow Anthrax Based on Gis and Spatial Statistical Analysis

NASA Astrophysics Data System (ADS)

Li, Lin; Yang, Yong; Wang, Hongbin; Dong, Jing; Zhao, Yujun; He, Jianbin; Fan, Honggang

Geographic information system (GIS) is a computer application system, which possesses the ability of manipulating spatial information and has been used in many fields related with the spatial information management. Many methods and models have been established for analyzing animal diseases distribution models and temporal-spatial transmission models. Great benefits have been gained from the application of GIS in animal disease epidemiology. GIS is now a very important tool in animal disease epidemiological research. Spatial analysis function of GIS can be widened and strengthened by using spatial statistical analysis, allowing for the deeper exploration, analysis, manipulation and interpretation of spatial pattern and spatial correlation of the animal disease. In this paper, we analyzed the cow anthrax spatial distribution characteristics in the target district A (due to the secret of epidemic data we call it district A) based on the established GIS of the cow anthrax in this district in combination of spatial statistical analysis and GIS. The Cow anthrax is biogeochemical disease, and its geographical distribution is related closely to the environmental factors of habitats and has some spatial characteristics, and therefore the correct analysis of the spatial distribution of anthrax cow for monitoring and the prevention and control of anthrax has a very important role. However, the application of classic statistical methods in some areas is very difficult because of the pastoral nomadic context. The high mobility of livestock and the lack of enough suitable sampling for the some of the difficulties in monitoring currently make it nearly impossible to apply rigorous random sampling methods. It is thus necessary to develop an alternative sampling method, which could overcome the lack of sampling and meet the requirements for randomness. The GIS computer application software ArcGIS9.1 was used to overcome the lack of data of sampling sites.Using ArcGIS 9.1 and GEODA to analyze the cow anthrax spatial distribution of district A. we gained some conclusions about cow anthrax' density: (1) there is a spatial clustering model. (2) there is an intensely spatial autocorrelation. We established a prediction model to estimate the anthrax distribution based on the spatial characteristic of the density of cow anthrax. Comparing with the true distribution, the prediction model has a well coincidence and is feasible to the application. The method using a GIS tool facilitates can be implemented significantly in the cow anthrax monitoring and investigation, and the space statistics - related prediction model provides a fundamental use for other study on space-related animal diseases.

Bim and Gis: when Parametric Modeling Meets Geospatial Data

NASA Astrophysics Data System (ADS)

Barazzetti, L.; Banfi, F.

2017-12-01

Geospatial data have a crucial role in several projects related to infrastructures and land management. GIS software are able to perform advanced geospatial analyses, but they lack several instruments and tools for parametric modelling typically available in BIM. At the same time, BIM software designed for buildings have limited tools to handle geospatial data. As things stand at the moment, BIM and GIS could appear as complementary solutions, notwithstanding research work is currently under development to ensure a better level of interoperability, especially at the scale of the building. On the other hand, the transition from the local (building) scale to the infrastructure (where geospatial data cannot be neglected) has already demonstrated that parametric modelling integrated with geoinformation is a powerful tool to simplify and speed up some phases of the design workflow. This paper reviews such mixed approaches with both simulated and real examples, demonstrating that integration is already a reality at specific scales, which are not dominated by "pure" GIS or BIM. The paper will also demonstrate that some traditional operations carried out with GIS software are also available in parametric modelling software for BIM, such as transformation between reference systems, DEM generation, feature extraction, and geospatial queries. A real case study is illustrated and discussed to show the advantage of a combined use of both technologies. BIM and GIS integration can generate greater usage of geospatial data in the AECOO (Architecture, Engineering, Construction, Owner and Operator) industry, as well as new solutions for parametric modelling with additional geoinformation.

Development of a GIS-based integrated framework for coastal seiches monitoring and forecasting: A North Jiangsu shoal case study

NASA Astrophysics Data System (ADS)

Qin, Rufu; Lin, Liangzhao

2017-06-01

Coastal seiches have become an increasingly important issue in coastal science and present many challenges, particularly when attempting to provide warning services. This paper presents the methodologies, techniques and integrated services adopted for the design and implementation of a Seiches Monitoring and Forecasting Integration Framework (SMAF-IF). The SMAF-IF is an integrated system with different types of sensors and numerical models and incorporates the Geographic Information System (GIS) and web techniques, which focuses on coastal seiche events detection and early warning in the North Jiangsu shoal, China. The in situ sensors perform automatic and continuous monitoring of the marine environment status and the numerical models provide the meteorological and physical oceanographic parameter estimates. A model outputs processing software was developed in C# language using ArcGIS Engine functions, which provides the capabilities of automatically generating visualization maps and warning information. Leveraging the ArcGIS Flex API and ASP.NET web services, a web based GIS framework was designed to facilitate quasi real-time data access, interactive visualization and analysis, and provision of early warning services for end users. The integrated framework proposed in this study enables decision-makers and the publics to quickly response to emergency coastal seiche events and allows an easy adaptation to other regional and scientific domains related to real-time monitoring and forecasting.

Application of a Geographic Information System for regridding a ground-water flow model of the Columbia Plateau Regional Aquifer System, Walla Walla River basin, Oregon-Washington

USGS Publications Warehouse

Darling, M.E.; Hubbard, L.E.

1994-01-01

Computerized Geographic Information Systems (GIS) have become viable and valuable tools for managing,analyzing, creating, and displaying data for three-dimensional finite-difference ground-water flow models. Three GIS applications demonstrated in this study are: (1) regridding of data arrays from an existing large-area, low resolution ground-water model to a smaller, high resolution grid; (2) use of GIS techniques for assembly of data-input arrays for a ground-water model; and (3) use of GIS for rapid display of data for verification, for checking of ground-water model output, and for the cre.ation of customized maps for use in reports. The Walla Walla River Basin was selected as the location for the demonstration because (1) data from a low resolution ground-water model (Columbia Plateau Regional Aquifer System Analysis [RASA]) were available and (2) concern for long-term use of water resources for irrigation in the basin. The principal advantage of regridding is that it may provide the ability to more precisely calibrate a model, assuming chat a more detailed coverage of data is available, and to evaluate the numerical errors associated with a particular grid design.Regridding gave about an 8-fold increase in grid-node density.Several FORTRAN programs were developed to load the regridded ground-water data into a finite-difference modular model as model-compatible input files for use in a steady-state model run.To facilitate the checking and validating of the GIS regridding process, maps and tabular reports were produced for each of eight ground-water parameters by model layer. Also, an automated subroutine that was developed to view the model-calculated water levels in cross-section will aid in the synthesis and interpretation of model results.

AUTOMATED GIS WATERSHED ANALYSIS TOOLS FOR RUSLE/SEDMOD SOIL EROSION AND SEDIMENTATION MODELING

EPA Science Inventory

A comprehensive procedure for computing soil erosion and sediment delivery metrics has been developed using a suite of automated Arc Macro Language (AML ) scripts and a pair of processing- intensive ANSI C++ executable programs operating on an ESRI ArcGIS 8.x Workstation platform...

AUTOMATED GEOSPATIAL WATERSHED ASSESSMENT (AGWA): A GIS-BASED HYDROLOGIC MODELING TOOL FOR WATERSHED ASSESSMENT AND ANALYSIS

EPA Science Inventory

The Automated Geospatial Watershed Assessment tool (AGWA) is a GIS interface jointly developed by the USDA Agricultural Research Service, the U.S. Environmental Protection Agency, the University of Arizona, and the University of Wyoming to automate the parameterization and execu...

AUTOMATED GEOSPATICAL WATERSHED ASSESSMENT (AGWA): A GIS-BASED HYDROLOICAL MODELING TOOL FOR WATERSHED ASSESSMENT AND ANALYSIS

EPA Science Inventory

The Automated Geospatial Watershed Assessment tool (AGWA) is a GIS interface jointly developed by the USDA Agricultural Research Service, the U.S. Environmental Protection Agency, the University of Arizona, and the University of Wyoming to automate the parameterization and execut...

Conceptual model of sediment processes in the upper Yuba River watershed, Sierra Nevada, CA

USGS Publications Warehouse

Curtis, J.A.; Flint, L.E.; Alpers, Charles N.; Yarnell, S.M.

2005-01-01

This study examines the development of a conceptual model of sediment processes in the upper Yuba River watershed; and we hypothesize how components of the conceptual model may be spatially distributed using a geographical information system (GIS). The conceptual model illustrates key processes controlling sediment dynamics in the upper Yuba River watershed and was tested and revised using field measurements, aerial photography, and low elevation videography. Field reconnaissance included mass wasting and channel storage inventories, assessment of annual channel change in upland tributaries, and evaluation of the relative importance of sediment sources and transport processes. Hillslope erosion rates throughout the study area are relatively low when compared to more rapidly eroding landscapes such as the Pacific Northwest and notable hillslope sediment sources include highly erodible andesitic mudflows, serpentinized ultramafics, and unvegetated hydraulic mine pits. Mass wasting dominates surface erosion on the hillslopes; however, erosion of stored channel sediment is the primary contributor to annual sediment yield. We used GIS to spatially distribute the components of the conceptual model and created hillslope erosion potential and channel storage models. The GIS models exemplify the conceptual model in that landscapes with low potential evapotranspiration, sparse vegetation, steep slopes, erodible geology and soils, and high road densities display the greatest hillslope erosion potential and channel storage increases with increasing stream order. In-channel storage in upland tributaries impacted by hydraulic mining is an exception. Reworking of stored hydraulic mining sediment in low-order tributaries continues to elevate upper Yuba River sediment yields. Finally, we propose that spatially distributing the components of a conceptual model in a GIS framework provides a guide for developing more detailed sediment budgets or numerical models making it an inexpensive way to develop a roadmap for understanding sediment dynamics at a watershed scale.

Integrating remote sensing, geographic information systems and global positioning system techniques with hydrological modeling

NASA Astrophysics Data System (ADS)

Thakur, Jay Krishna; Singh, Sudhir Kumar; Ekanthalu, Vicky Shettigondahalli

2017-07-01

Integration of remote sensing (RS), geographic information systems (GIS) and global positioning system (GPS) are emerging research areas in the field of groundwater hydrology, resource management, environmental monitoring and during emergency response. Recent advancements in the fields of RS, GIS, GPS and higher level of computation will help in providing and handling a range of data simultaneously in a time- and cost-efficient manner. This review paper deals with hydrological modeling, uses of remote sensing and GIS in hydrological modeling, models of integrations and their need and in last the conclusion. After dealing with these issues conceptually and technically, we can develop better methods and novel approaches to handle large data sets and in a better way to communicate information related with rapidly decreasing societal resources, i.e. groundwater.

NE Ohio Urban Growth Monitoring and Modeling Prototype. Revised

NASA Technical Reports Server (NTRS)

Siebert, Loren; Klosterman, Richard E.

2001-01-01

At the University of Akron, Dr. Loren Siebert, Dr. Richard Klosterman, and their graduate research assistants (Jung-Wook Kim, Mohammed Hoque, Aziza Parveen, and Ben Stabler) worked on the integration of remote sensing and GIs-based planning support systems. The primary goal of the project was to develop methods that use remote sensing land cover mapping and GIs-based modeling to monitor and project urban growth and farmland loss in northeast Ohio. Another research goal has been to use only GIS data that are accessible via the World Wide Web, to determine whether Ohio's small counties and townships that do not currently have parcel-level GIS systems can apply these techniques. The project was jointly funded by NASA and USGS OhioView grants during the 2000-2001 academic year; the work is now being continued under a USGS grant.

Approach to spatial information security based on digital certificate

NASA Astrophysics Data System (ADS)

Cong, Shengri; Zhang, Kai; Chen, Baowen

2005-11-01

With the development of the online applications of geographic information systems (GIS) and the spatial information services, the spatial information security becomes more important. This work introduced digital certificates and authorization schemes into GIS to protect the crucial spatial information combining the techniques of the role-based access control (RBAC), the public key infrastructure (PKI) and the privilege management infrastructure (PMI). We investigated the spatial information granularity suited for sensitivity marking and digital certificate model that fits the need of GIS security based on the semantics analysis of spatial information. It implements a secure, flexible, fine-grained data access based on public technologies in GIS in the world.

A method of groundwater quality assessment based on fuzzy network-CANFIS and geographic information system (GIS)

NASA Astrophysics Data System (ADS)

Gholami, V.; Khaleghi, M. R.; Sebghati, M.

2017-11-01

The process of water quality testing is money/time-consuming, quite important and difficult stage for routine measurements. Therefore, use of models has become commonplace in simulating water quality. In this study, the coactive neuro-fuzzy inference system (CANFIS) was used to simulate groundwater quality. Further, geographic information system (GIS) was used as the pre-processor and post-processor tool to demonstrate spatial variation of groundwater quality. All important factors were quantified and groundwater quality index (GWQI) was developed. The proposed model was trained and validated by taking a case study of Mazandaran Plain located in northern part of Iran. The factors affecting groundwater quality were the input variables for the simulation, whereas GWQI index was the output. The developed model was validated to simulate groundwater quality. Network validation was performed via comparison between the estimated and actual GWQI values. In GIS, the study area was separated to raster format in the pixel dimensions of 1 km and also by incorporation of input data layers of the Fuzzy Network-CANFIS model; the geo-referenced layers of the effective factors in groundwater quality were earned. Therefore, numeric values of each pixel with geographical coordinates were entered to the Fuzzy Network-CANFIS model and thus simulation of groundwater quality was accessed in the study area. Finally, the simulated GWQI indices using the Fuzzy Network-CANFIS model were entered into GIS, and hence groundwater quality map (raster layer) based on the results of the network simulation was earned. The study's results confirm the high efficiency of incorporation of neuro-fuzzy techniques and GIS. It is also worth noting that the general quality of the groundwater in the most studied plain is fairly low.

Research on spatio-temporal database techniques for spatial information service

NASA Astrophysics Data System (ADS)

Zhao, Rong; Wang, Liang; Li, Yuxiang; Fan, Rongshuang; Liu, Ping; Li, Qingyuan

2007-06-01

Geographic data should be described by spatial, temporal and attribute components, but the spatio-temporal queries are difficult to be answered within current GIS. This paper describes research into the development and application of spatio-temporal data management system based upon GeoWindows GIS software platform which was developed by Chinese Academy of Surveying and Mapping (CASM). Faced the current and practical requirements of spatial information application, and based on existing GIS platform, one kind of spatio-temporal data model which integrates vector and grid data together was established firstly. Secondly, we solved out the key technique of building temporal data topology, successfully developed a suit of spatio-temporal database management system adopting object-oriented methods. The system provides the temporal data collection, data storage, data management and data display and query functions. Finally, as a case study, we explored the application of spatio-temporal data management system with the administrative region data of multi-history periods of China as the basic data. With all the efforts above, the GIS capacity of management and manipulation in aspect of time and attribute of GIS has been enhanced, and technical reference has been provided for the further development of temporal geographic information system (TGIS).

Lowering the barriers to computational modeling of Earth's surface: coupling Jupyter Notebooks with Landlab, HydroShare, and CyberGIS for research and education.

NASA Astrophysics Data System (ADS)

Bandaragoda, C.; Castronova, A. M.; Phuong, J.; Istanbulluoglu, E.; Strauch, R. L.; Nudurupati, S. S.; Tarboton, D. G.; Wang, S. W.; Yin, D.; Barnhart, K. R.; Tucker, G. E.; Hutton, E.; Hobley, D. E. J.; Gasparini, N. M.; Adams, J. M.

2017-12-01

The ability to test hypotheses about hydrology, geomorphology and atmospheric processes is invaluable to research in the era of big data. Although community resources are available, there remain significant educational, logistical and time investment barriers to their use. Knowledge infrastructure is an emerging intellectual framework to understand how people are creating, sharing and distributing knowledge - which has been dramatically transformed by Internet technologies. In addition to the technical and social components in a cyberinfrastructure system, knowledge infrastructure considers educational, institutional, and open source governance components required to advance knowledge. We are designing an infrastructure environment that lowers common barriers to reproducing modeling experiments for earth surface investigation. Landlab is an open-source modeling toolkit for building, coupling, and exploring two-dimensional numerical models. HydroShare is an online collaborative environment for sharing hydrologic data and models. CyberGIS-Jupyter is an innovative cyberGIS framework for achieving data-intensive, reproducible, and scalable geospatial analytics using the Jupyter Notebook based on ROGER - the first cyberGIS supercomputer, so that models that can be elastically reproduced through cloud computing approaches. Our team of geomorphologists, hydrologists, and computer geoscientists has created a new infrastructure environment that combines these three pieces of software to enable knowledge discovery. Through this novel integration, any user can interactively execute and explore their shared data and model resources. Landlab on HydroShare with CyberGIS-Jupyter supports the modeling continuum from fully developed modelling applications, prototyping new science tools, hands on research demonstrations for training workshops, and classroom applications. Computational geospatial models based on big data and high performance computing can now be more efficiently developed, improved, scaled, and seamlessly reproduced among multidisciplinary users, thereby expanding the active learning curriculum and research opportunities for students in earth surface modeling and informatics.

GRASS GIS: a peer-reviewed scientific platform and future research repository

NASA Astrophysics Data System (ADS)

Chemin, Yann; Petras, Vaclav; Petrasova, Anna; Landa, Martin; Gebbert, Sören; Zambelli, Pietro; Neteler, Markus; Löwe, Peter; Di Leo, Margherita

2015-04-01

Geographical Information System (GIS) is known for its capacity to spatially enhance the management of natural resources. While being often used as an analytical tool, it also represents a collaborative scientific platform to develop new algorithms. Thus, it is critical that GIS software as well as the algorithms are open and accessible to anybody [18]. We present how GRASS GIS, a free and open source GIS, is used by many scientists to implement and perform geoprocessing tasks. We will show how integrating scientific algorithms into GRASS GIS helps to preserve reproducibility of scientific results over time [15]. Moreover, subsequent improvements are tracked in the source code version control system and are immediately available to the public. GRASS GIS therefore acts as a repository of scientific peer-reviewed code, algorithm library, and knowledge hub for future generation of scientists. In the field of hydrology, with the various types of actual evapotranspiration (ET) models being developed in the last 20 years, it becomes necessary to inter-compare methods. Most of already published ETa models comparisons address few number of models, and small to medium areas [3, 6, 7, 22, 23]. With the large amount of remote sensing data covering the Earth, and the daily information available for the past ten years (i.e. Aqua/Terra-MODIS) for each pixel location, it becomes paramount to have a more complete comparison, in space and time. To address this new experimental requirement, a distributed computing framework was designed, and created [3, 4]. The design architecture was built from original satellite datasets to various levels of processing until reaching the requirement of various ETa models input dataset. Each input product is computed once and reused in all ETa models requiring such input. This permits standardization of inputs as much as possible to zero-in variations of models to the models internals/specificities. All of the ET models are available in the new GRASS GIS version 7 as imagery modules and replicability is complete for future research. A set of modules for multiscale analysis of landscape structure was added in 1992 by [1], who developed the r.le model similar to FRAGSTATS ([10]). The modules were gradually improved to become r.li in 2006. Further development continued, with a significant speed up [9] and new interactive user interface. The development of spatial interpolation module v.surf.rst started in 1988 [11] and continued by introduction of new interpolation methods and finally full integration into GRASS GIS version 4 [13]. Since then it was improved several times [8]. The module is an important part of GRASS GIS and is taught at geospatial modeling courses, for example at North Carolina State University [14]. GRASS GIS entails several modules that constitute the result of active research on natural hazard. The r.sim.water simulation model [12] for overland flow under rainfall excess conditions was integrated into the Emergency Routing Decision Planning system as a WPS [17]. It was also utilized by [16] and is now part of Tangible Landscape, a tangible GIS system, which also incorporated the r.damflood, a dam break inundation simulation [2]. The wildfire simulation toolset, originally developed by [24], implementing Rothermel's model [21], available through the GRASS GIS modules r.ros and r.spread, is object of active research. It has been extensively tested and recently adapted to European fuel types ([5, 19, 20]). References [1] Baker, W.L., Cai, Y., 1992. The r.le programs for multiscale analysis of landscape structure using the GRASS geographical information system. Landscape Ecology, 7(4):291-302. [2] Cannata M. and Marzocchi R., 2012. Two-dimensional dam break flooding simulation: a GIS embedded approach. - Natural Hazards 61(3):1143-1159. [3] Chemin, Y.H., 2012. A Distributed Benchmarking Framework for Actual ET Models. In Evapotranspiration - Remote Sensing and Modeling, Intech (Eds). [4] Chemin, Y. H. , 2014. Remote Sensing Raster Programming, 3rd Ed., Lulu (Eds). [5] Di Leo, M., de Rigo, D., Rodriguez-Aseretto, D., Bosco, C., Petroliagkis, T., Camia, A., San-Miguel-Ayanz, J., 2013. Dynamic data driven ensemble for wildfire behaviour assessment: A case study. IFIP Advances in Information and Communication Technology, vol. 413, pp. 11-22, 2013, ISSN:1868-4238. Special issue: "Environmental Software Systems. Fostering sharing information". [6] García, M., Villagarcía, L., Contreras, S., Domingo, F. & Puigdefábregas, J. (2007). Comparison of three operative models for estimating the surface water deficit using aster reflective and thermal data, Sensors 7(6): 860-883. [7] Gao, Y. & Long, D. ,2008. Intercomparison of remote sensing-based models for estimation of evapotranspiration and accuracy assessment based on swat, Hydrological Processes 22: 4850-4869. [8] GRASS GIS Trac, changelog for v.surf.rst, 2015. http://trac.osgeo.org/grass/ [9] GRASS GIS Trac, changelog for r.li, 2015. http://trac.osgeo.org/grass/ [10] McGarigal, K., and B. J. Marks. 1995. FRAGSTATS: spatial pattern analysis program for quantifying landscape structure. USDA For. Serv. Gen. Tech. Rep. PNW-351 [11] Mitas, L., and Mitasova H., 1988, General variational approach to the approximation problem, Computers and Mathematics with Applications, v.16, p. 983-992. [12] Mitas, L., and Mitasova, H., 1998, Distributed soil erosion simulation for effective erosion prevention. Water Resources Research, 34(3), 505-516. [13] Mitasova, H. and Mitas, L., 1993: Interpolation by Regularized Spline with Tension: I. Theory and Implementation, Mathematical Geology, 25, 641-655. [14] North Carolina State University, Geospatial Modeling Course, GIS/MEA582, 2015. http://courses.ncsu.edu/ [15] Petras, V., Gebbert, S., 2014. Testing framework for GRASS GIS: ensuring reproducibility of scientific geospatial computing. Poster presented at: AGU Fall Meeting, December 15-19, 2014, San Francisco, USA. [16] Petrasova, A., Harmon, B., Petras, V., Mitasova, H., 2014. GIS-based environmental modeling with tangible interaction and dynamic visualization. In: Ames, D.P., Quinn, N.W.T., Rizzoli, A.E. (Eds.), Proceedings of the 7th International Congress on Environmental Modelling and Software, June 15-19, San Diego, California, USA. ISBN: 978-88-9035-744-2 [17] Raghavan, v., Choosumrong, S., Yoshida, D., Vinayaraj, P., 2014. Deploying Dynamic Routing Service for Emergency Scenarios using pgRouting, GRASS and ZOO. In Proc. of FOSS4G Europe, Jacobs University, Bremen, Germany, July 15-17, 2014. [18] Rocchini, D., Neteler, M. ,2012. Let the four freedoms paradigm apply to ecology. Trends in Ecology & Evolution, 27: 310-311. [19] Rodriguez-Aseretto, D., de Rigo, D., Di Leo, M., Cortés, A., and San-Miguel-Ayanz, J., 2013. A data-driven model for large wildfire behaviour prediction in europe. Procedia Computer Science, vol. 18, pp. 1861-1870. [20] de Rigo, D., Rodriguez-Aseretto, D., Bosco, C., Di Leo, M., and San-Miguel-Ayanz, J., 2013. An architecture for adaptive robust modelling of wildfire behaviour under deep uncertainty. in Environmental Software Systems. Fostering Information Sharing, ser. IFIP Advances in Information and Communication Technology, J. Ȟrebíˇ cek, G. Schimak, M. Kubásek, and A. Rizzoli, Eds. Springer Berlin Heidelberg, 2013, vol. 413, pp. 367-380. [21] Rothermel, R. C., 1983. How to predict the spread and intensity of forest and range fires. US Forest Service, Gen. Tech. Rep. INT-143. Ogden, Utah. [22] Suleiman, A., Al-Bakri, J., Duqqah, M. & Crago, R. ,2008. Intercomparison ofevapotranspiration estimates at the different ecological zones in jordan, Journal of Hydrometeorology 9(5): 903-919. [23] Timmermans, W. J., Kustas, W. P., Anderson, M. C. & French, A. N. ,2007. An intercomparison of the surface energy balance algorithm for land (sebal) and the two-source energy balance (tseb) modeling schemes, Remote Sensing of Environment 108(4): 369 - 384. [24] Xu, Jianping, 1994. Simulating the spread of wildfires using a geographic information system and remote sensing. Ph. D. Dissertation, Rutgers University, New Brunswick, New Jersey.

Analysis of Distribution of Vector-Borne Diseases Using Geographic Information Systems.

PubMed

Nihei, Naoko

2017-01-01

The distribution of vector-borne diseases is changing on a global scale owing to issues involving natural environments, socioeconomic conditions and border disputes among others. Geographic information systems (GIS) provide an important method of establishing a prompt and precise understanding of local data on disease outbreaks, from which disease eradication programs can be established. Having first defined GIS as a combination of GPS, RS and GIS, we showed the processes through which these technologies were being introduced into our research. GIS-derived geographical information attributes were interpreted in terms of point, area, line, spatial epidemiology, risk and development for generating the vector dynamic models associated with the spread of the disease. The need for interdisciplinary scientific and administrative collaboration in the use of GIS to control infectious diseases is highly warranted.

Evaluating agricultural nonpoint-source pollution using integrated geographic information systems and hydrologic/water quality model

DOE Office of Scientific and Technical Information (OSTI.GOV)

Tim, U.S.; Jolly, R.

1994-01-01

Considerable progress has been made in developing physically based, distributed parameter, hydrologic/water quality (HIWQ) models for planning and control of nonpoint-source pollution. The widespread use of these models is often constrained by the excessive and time-consuming input data demands and the lack of computing efficiencies necessary for iterative simulation of alternative management strategies. Recent developments in geographic information systems (GIS) provide techniques for handling large amounts of spatial data for modeling nonpoint-source pollution problems. Because a GIS can be used to combine information from several sources to form an array of model input data and to examine any combinations ofmore » spatial input/output data, it represents a highly effective tool for HiWQ modeling. This paper describes the integration of a distributed-parameter model (AGNPS) with a GIS (ARC/INFO) to examine nonpoint sources of pollution in an agricultural watershed. The ARC/INFO GIS provided the tools to generate and spatially organize the disparate data to support modeling, while the AGNPS model was used to predict several water quality variables including soil erosion and sedimentation within a watershed. The integrated system was used to evaluate the effectiveness of several alternative management strategies in reducing sediment pollution in a 417-ha watershed located in southern Iowa. The implementation of vegetative filter strips and contour buffer (grass) strips resulted in a 41 and 47% reduction in sediment yield at the watershed outlet, respectively. In addition, when the integrated system was used, the combination of the above management strategies resulted in a 71% reduction in sediment yield. In general, the study demonstrated the utility of integrating a simulation model with GIS for nonpoini-source pollution control and planning. Such techniques can help characterize the diffuse sources of pollution at the landscape level. 52 refs., 6 figs., 1 tab.« less

Optimum municipal solid waste collection using geographical information system (GIS) and vehicle tracking for Pallavapuram municipality.

PubMed

Kanchanabhan, T E; Abbas Mohaideen, J; Srinivasan, S; Sundaram, V Lenin Kalyana

2011-03-01

Waste collection and transportation is the contact point between waste generators and waste management systems. A proposal for an innovative model for the collection and transportation of municipal solid waste (MSW) which is a part of a solid waste management system using a spatial geo database, integrated in a geographical information system (GIS) environment is presented. Pallavapuram is a fast-developing municipality of Chennai city in the southern suburbs about 20 km from Chennai, the state capital of Tamil Nadu in India. The disposal of MSW was previously occurring in an indiscriminate and irrational manner in the municipality. Hence in the present study an attempt was made to develop an engineered design of solid waste collection using GIS with a vehicle tracking system and final disposal by composting with investment costs. The GIS was used to analyse existing maps and data, to digitize the existing ward boundaries and to enter data about the wards and disposal sites. The proposed GIS model for solid waste disposal would give information on the planning of bins, vehicles and the optimal route. In the case of disposal, composting would be a successful strategy to accelerate the decomposition and stabilization of the biodegradable components of waste in MSW.

AUTOMATED GEOSPATIAL WATERSHED ASSESSMENT (AGWA): A GIS-BASED HYRDOLOGIC MODELING TOOL FOR WATERSHED ASSESSMENT AND ANALYSIS

EPA Science Inventory

The Automated Geospatial Watershed Assessment tool (AGWA) is a GIS interface jointly

developed by the USDA Agricultural Research Service, the U.S. Environmental Protection

Agency, the University of Arizona, and the University of Wyoming to automate the

parame...

AUTOMATED GEOSPATIAL WATERSHED ASSESSMENT (AGWA): A GIS-BASED HYDROLOGICAL MODELING TOOL FOR WATERSHED MANAGEMENT AND LANDSCAPE ASSESSMENT

EPA Science Inventory

The Automated Geospatial Watershed Assessment (http://www.epa.gov/nerlesd1/land-sci/agwa/introduction.htm and www.tucson.ars.ag.gov/agwa) tool is a GIS interface jointly developed by the U.S. Environmental Protection Agency, USDA-Agricultural Research Service, and the University ...

Where and Why There? Spatial Thinking with Geographic Information Systems

ERIC Educational Resources Information Center

Milson, Andrew J.; Curtis, Mary D.

2009-01-01

The authors developed and implemented a project for high school geography students that modeled the processes in a site selection analysis using Geographic Information Systems (GIS). They sought to explore how spatial thinking could be fostered by using the MyWorld GIS software that was designed specifically for educational uses. The task posed…

The benefits of GIS to land use planning

NASA Astrophysics Data System (ADS)

Strielko, Irina; Pereira, Paulo

2014-05-01

The development of information technologies has significantly changed the approach to land use and spatial planning, management of natural resources. GIS considerably simplifies territorial planning operating analyzing necessary data concerning their spatial relationship that allows carrying out complex assessment of the situation and creates a basis for adoption of more exact and scientifically reasonable decisions in the course of land use. To assess the current land use situation and the possibility of modeling possible future changes associated with complex of adopted measures GIS allows the integration of diverse spatial data, for example, data about soils, climate, vegetation, and other and also to visualize available information in the form of maps, graphs or charts, 3D models. For the purposes of land use GIS allow using data of remote sensing, which allows to make monitoring of anthropogenic influence in a particular area and estimate scales and rates of degradation of green cover, flora and fauna. Assessment of land use can be made in complex or componentwise, indicating the test sites depending on the goals. GIS make it easy to model spatial distribution of various types of pollution of stationary and mobile sources in soil, atmosphere and the hydrological network. Based on results of the analysis made by GIS choose the optimal solutions of land use that provide the minimum impact on environment, make optimal decisions of conflict associated with land use and control of their using. One of the major advantages of using GIS is possibility of the complex analysis in concrete existential aspect. Analytical opportunities of GIS define conditionality of spatial distribution of objects and interrelation communication between them. For a variety of land management objectives analysis method is chosen based on the parameters of the problem and parameters of use of its results.

Vector Data Model: A New Model of HDF-EOS to Support GIS Applications in EOS

NASA Astrophysics Data System (ADS)

Chi, E.; Edmonds, R d

2001-05-01

NASA's Earth Science Data Information System (ESDIS) project has an active program of research and development of systems for the storage and management of Earth science data for Earth Observation System (EOS) mission, a key program of NASA Earth Science Enterprise. EOS has adopted an extension of the Hierarchical Data Format (HDF) as the format of choice for standard product distribution. Three new EOS specific datatypes - point, swath and grid - have been defined within the HDF framework. The enhanced data format is named HDF-EOS. Geographic Information Systems (GIS) are used by Earth scientists in EOS data product generation, visualization, and analysis. There are two major data types in GIS applications, raster and vector. The current HDF-EOS handles only raster type in the swath data model. The vector data model is identified and developed as a new HDFEOS format to meet the requirements of scientists working with EOS data products in vector format. The vector model is designed using a topological data structure, which defines the spatial relationships among points, lines, and polygons. The three major topological concepts that the vector model adopts are: a) lines connect to each other at nodes (connectivity), b) lines that connect to surround an area define a polygon (area definition), and c) lines have direction and left and right sides (contiguity). The vector model is implemented in HDF by mapping the conceptual model to HDF internal data models and structures, viz. Vdata, Vgroup, and their associated attribute structures. The point, line, and polygon geometry and attribute data are stored in similar tables. Further, the vector model utilizes the structure and product metadata, which characterize the HDF-EOS. Both types of metadata are stored as attributes in HDF-EOS files, and are encoded in text format by using Object Description Language (ODL) and stored as global attributes in HDF-EOS files. EOS has developed a series of routines for storing, retrieving, and manipulating vector data in category of access, definition, basic I/O, inquiry, and subsetting. The routines are tested and form a package, HDF-EOS/Vector. The alpha version of HDFEOS/Vector has been distributed through the HDF-EOS project web site at http://hdfeos.gsfc.nasa.gov. We are also developing translators between HDF-EOS vector format and variety of GIS formats, such as Shapefile. The HDF-EOS vector model enables EOS scientists to deliver EOS data in a way ready for Earth scientists to analyze using GIS software, and also provides EOS project a mechanism to store GIS data product in meaningful vector format with significant economy in storage.

Integration agent-based models and GIS as a virtual urban dynamic laboratory

NASA Astrophysics Data System (ADS)

Chen, Peng; Liu, Miaolong

2007-06-01

Based on the Agent-based Model and spatial data model, a tight-coupling integrating method of GIS and Agent-based Model (ABM) is to be discussed in this paper. The use of object-orientation for both spatial data and spatial process models facilitates their integration, which can allow exploration and explanation of spatial-temporal phenomena such as urban dynamic. In order to better understand how tight coupling might proceed and to evaluate the possible functional and efficiency gains from such a tight coupling, the agent-based model and spatial data model are discussed, and then the relationships affecting spatial data model and agent-based process models interaction. After that, a realistic crowd flow simulation experiment is presented. Using some tools provided by general GIS systems and a few specific programming languages, a new software system integrating GIS and MAS as a virtual laboratory applicable for simulating pedestrian flows in a crowd activity centre has been developed successfully. Under the environment supported by the software system, as an applicable case, a dynamic evolution process of the pedestrian's flows (dispersed process for the spectators) in a crowds' activity center - The Shanghai Stadium has been simulated successfully. At the end of the paper, some new research problems have been pointed out for the future.

From Particles and Point Clouds to Voxel Models: High Resolution Modeling of Dynamic Landscapes in Open Source GIS

NASA Astrophysics Data System (ADS)

Mitasova, H.; Hardin, E. J.; Kratochvilova, A.; Landa, M.

2012-12-01

Multitemporal data acquired by modern mapping technologies provide unique insights into processes driving land surface dynamics. These high resolution data also offer an opportunity to improve the theoretical foundations and accuracy of process-based simulations of evolving landforms. We discuss development of new generation of visualization and analytics tools for GRASS GIS designed for 3D multitemporal data from repeated lidar surveys and from landscape process simulations. We focus on data and simulation methods that are based on point sampling of continuous fields and lead to representation of evolving surfaces as series of raster map layers or voxel models. For multitemporal lidar data we present workflows that combine open source point cloud processing tools with GRASS GIS and custom python scripts to model and analyze dynamics of coastal topography (Figure 1) and we outline development of coastal analysis toolbox. The simulations focus on particle sampling method for solving continuity equations and its application for geospatial modeling of landscape processes. In addition to water and sediment transport models, already implemented in GIS, the new capabilities under development combine OpenFOAM for wind shear stress simulation with a new module for aeolian sand transport and dune evolution simulations. Comparison of observed dynamics with the results of simulations is supported by a new, integrated 2D and 3D visualization interface that provides highly interactive and intuitive access to the redesigned and enhanced visualization tools. Several case studies will be used to illustrate the presented methods and tools and demonstrate the power of workflows built with FOSS and highlight their interoperability.Figure 1. Isosurfaces representing evolution of shoreline and a z=4.5m contour between the years 1997-2011at Cape Hatteras, NC extracted from a voxel model derived from series of lidar-based DEMs.

GIS as a tool for efficient management of transport streams

NASA Astrophysics Data System (ADS)

Zatserkovnyi, V. I.; Kobrin, O. V.

2015-10-01

The transport network, which is an ideal object for the automation and the increase of efficiency using geographic information systems (GIS), is considered. The transport problems, which have a lot of mathematical models of the traffic flow for their solution, are enumerated. GIS analysis tools that allow one to build optimal routes in the real road network with its capabilities and limitations are presented. They can solve the extremely important problem of modern Ukraine - the rapid increase of the number of cars and the glut of road network vehicles. The intelligent transport systems, which are created and developed on the basis of GPS, GIS, modern communications and telecommunications facilities, are considered.

Section 4. The GIS Weasel User's Manual

USGS Publications Warehouse

Viger, Roland J.; Leavesley, George H.

2007-01-01

INTRODUCTION The GIS Weasel was designed to aid in the preparation of spatial information for input to lumped and distributed parameter hydrologic or other environmental models. The GIS Weasel provides geographic information system (GIS) tools to help create maps of geographic features relevant to a user's model and to generate parameters from those maps. The operation of the GIS Weasel does not require the user to be a GIS expert, only that the user have an understanding of the spatial information requirements of the environmental simulation model being used. The GIS Weasel software system uses a GIS-based graphical user interface (GUI), the C programming language, and external scripting languages. The software will run on any computing platform where ArcInfo Workstation (version 8.0.2 or later) and the GRID extension are accessible. The user controls the processing of the GIS Weasel by interacting with menus, maps, and tables. The purpose of this document is to describe the operation of the software. This document is not intended to describe the usage of this software in support of any particular environmental simulation model. Such guides are published separately.

Construction of a Distributed-network Digital Watershed Management System with B/S Techniques

NASA Astrophysics Data System (ADS)

Zhang, W. C.; Liu, Y. M.; Fang, J.

2017-07-01

Integrated watershed assessment tools for supporting land management and hydrologic research are becoming established tools in both basic and applied research. The core of these tools are mainly spatially distributed hydrologic models as they can provide a mechanism for investigating interactions among climate, topography, vegetation, and soil. However, the extensive data requirements and the difficult task of building input parameter files for driving these distributed models, have long been an obstacle to the timely and cost-effective use of such complex models by watershed managers and policy-makers. Recently, a web based geographic information system (GIS) tool to facilitate this process has been developed for a large watersheds of Jinghe and Weihe catchments located in the loess plateau of the Huanghe River basin in north-western China. A web-based GIS provides the framework within which spatially distributed data are collected and used to prepare model input files of these two watersheds and evaluate model results as well as to provide the various clients for watershed information inquiring, visualizing and assessment analysis. This Web-based Automated Geospatial Watershed Assessment GIS (WAGWA-GIS) tool uses widely available standardized spatial datasets that can be obtained via the internet oracle databank designed with association of Map Guide platform to develop input parameter files for online simulation at different spatial and temporal scales with Xing’anjiang and TOPMODEL that integrated with web-based digital watershed. WAGWA-GIS automates the process of transforming both digital data including remote sensing data, DEM, Land use/cover, soil digital maps and meteorological and hydrological station geo-location digital maps and text files containing meteorological and hydrological data obtained from stations of the watershed into hydrological models for online simulation and geo-spatial analysis and provides a visualization tool to help the user interpret results. The utility of WAGWA-GIS in jointing hydrologic and ecological investigations has been demonstrated on such diverse landscapes as Jinhe and Weihe watersheds, and will be extended to be utilized in the other watersheds in China step by step in coming years

Aggregate supply and demand modeling using GIS methods for the front range urban corridor, Colorado

NASA Astrophysics Data System (ADS)

Karakas, Ahmet; Turner, Keith

2004-07-01

The combined use of allocation modeling and geographical information system (GIS) technologies for providing quantitative assessments of aggregate supply and demand is evaluated using representative data for the Front Range Urban Corridor (FRUC) in Colorado. The FRUC extends from the Colorado-Wyoming border to south of Colorado Springs, and includes Denver and the major urban growth regions of Colorado. In this area, aggregate demand is high and is increasing in response to population growth. Neighborhood opposition to the establishment of new pits and quarries and the depletion of many deposits are limiting aggregate supplies. Many sources are already covered by urban development or eliminated from production by zoning. Transport of aggregate by rail from distant resources may be required in the future. Two allocation-modeling procedures are tested in this study. Network analysis procedures provided within the ARC/INFO software, are unsatisfactory. Further aggregate allocation modeling used a model specifically designed for this task; a modified version of an existing Colorado School of Mines allocation model allows for more realistic market analyses. This study evaluated four scenarios. The entire region was evaluated with a scenario reflecting the current market and by a second scenario in which some existing suppliers were closed down and new potential suppliers were activated. The conditions within the Denver metropolitan area were studied before and after the introduction of three possible rail-to-truck aggregate distribution centers. GIS techniques are helpful in developing the required database to describe the Front Range Urban Corridor aggregate market conditions. GIS methods allow the digital representation of the regional road network, and the development of a distance matrix relating all suppliers and purchasers.

Prediction of stream fish assemblages from land use characteristics: implications for cost-effective design of monitoring programmes.

PubMed

Kristensen, Esben Astrup; Baattrup-Pedersen, Annette; Andersen, Hans Estrup

2012-03-01

Increasing human impact on stream ecosystems has resulted in a growing need for tools helping managers to develop conservations strategies, and environmental monitoring is crucial for this development. This paper describes the development of models predicting the presence of fish assemblages in lowland streams using solely cost-effective GIS-derived land use variables. Three hundred thirty-five stream sites were separated into two groups based on size. Within each group, fish abundance data and cluster analysis were used to determine the composition of fish assemblages. The occurrence of assemblages was predicted using a dataset containing land use variables at three spatial scales (50 m riparian corridor, 500 m riparian corridor and the entire catchment) supplemented by a dataset on in-stream variables. The overall classification success varied between 66.1-81.1% and was only marginally better when using in-stream variables than when applying only GIS variables. Also, the prediction power of a model combining GIS and in-stream variables was only slightly better than prediction based solely on GIS variables. The possibility of obtaining precise predictions without using costly in-stream variables offers great potential in the design of monitoring programmes as the distribution of monitoring sites along a gradient in ecological quality can be done at a low cost.

Design of an UML conceptual model and implementation of a GIS with metadata information for a seismic hazard assessment cooperative project.

NASA Astrophysics Data System (ADS)

Torres, Y.; Escalante, M. P.

2009-04-01

This work illustrates the advantages of using a Geographic Information System in a cooperative project with researchers of different countries, such as the RESIS II project (financed by the Norwegian Government and managed by CEPREDENAC) for seismic hazard assessment of Central America. As input data present different formats, cover distinct geographical areas and are subjected to different interpretations, data inconsistencies may appear and their management get complicated. To achieve data homogenization and to integrate them in a GIS, it is required previously to develop a conceptual model. This is accomplished in two phases: requirements analysis and conceptualization. The Unified Modeling Language (UML) is used to compose the conceptual model of the GIS. UML complies with ISO 19100 norms and allows the designer defining model architecture and interoperability. The GIS provides a frame for the combination of large geographic-based data volumes, with an uniform geographic reference and avoiding duplications. All this information contains its own metadata following ISO 19115 normative. In this work, the integration in the same environment of active faults and subduction slabs geometries, combined with the epicentres location, has facilitated the definition of seismogenetic regions. This is a great support for national specialists of different countries to make easier their teamwork. The GIS capacity for making queries (by location and by attributes) and geostatistical analyses is used to interpolate discrete data resulting from seismic hazard calculations and to create continuous maps as well as to check and validate partial results of the study. GIS-based products, such as complete, homogenised databases and thematic cartography of the region, are distributed to all researchers, facilitating cross-national communication, the project execution and results dissemination.

Assessment of flood susceptible areas using spatially explicit, probabilistic multi-criteria decision analysis

NASA Astrophysics Data System (ADS)

Tang, Zhongqian; Zhang, Hua; Yi, Shanzhen; Xiao, Yangfan

2018-03-01

GIS-based multi-criteria decision analysis (MCDA) is increasingly used to support flood risk assessment. However, conventional GIS-MCDA methods fail to adequately represent spatial variability and are accompanied with considerable uncertainty. It is, thus, important to incorporate spatial variability and uncertainty into GIS-based decision analysis procedures. This research develops a spatially explicit, probabilistic GIS-MCDA approach for the delineation of potentially flood susceptible areas. The approach integrates the probabilistic and the local ordered weighted averaging (OWA) methods via Monte Carlo simulation, to take into account the uncertainty related to criteria weights, spatial heterogeneity of preferences and the risk attitude of the analyst. The approach is applied to a pilot study for the Gucheng County, central China, heavily affected by the hazardous 2012 flood. A GIS database of six geomorphological and hydrometeorological factors for the evaluation of susceptibility was created. Moreover, uncertainty and sensitivity analysis were performed to investigate the robustness of the model. The results indicate that the ensemble method improves the robustness of the model outcomes with respect to variation in criteria weights and identifies which criteria weights are most responsible for the variability of model outcomes. Therefore, the proposed approach is an improvement over the conventional deterministic method and can provides a more rational, objective and unbiased tool for flood susceptibility evaluation.

A geographic information system-based 3D city estate modeling and simulation system

NASA Astrophysics Data System (ADS)

Chong, Xiaoli; Li, Sha

2015-12-01

This paper introduces a 3D city simulation system which is based on geographic information system (GIS), covering all commercial housings of the city. A regional- scale, GIS-based approach is used to capture, describe, and track the geographical attributes of each house in the city. A sorting algorithm of "Benchmark + Parity Rate" is developed to cluster houses with similar spatial and construction attributes. This system is applicable for digital city modeling, city planning, housing evaluation, housing monitoring, and visualizing housing transaction. Finally, taking Jingtian area of Shenzhen as an example, the each unit of 35,997 houses in the area could be displayed, tagged, and easily tracked by the GIS-based city modeling and simulation system. The match market real conditions well and can be provided to house buyers as reference.

Modular GIS Framework for National Scale Hydrologic and Hydraulic Modeling Support

NASA Astrophysics Data System (ADS)

Djokic, D.; Noman, N.; Kopp, S.

2015-12-01

Geographic information systems (GIS) have been extensively used for pre- and post-processing of hydrologic and hydraulic models at multiple scales. An extensible GIS-based framework was developed for characterization of drainage systems (stream networks, catchments, floodplain characteristics) and model integration. The framework is implemented as a set of free, open source, Python tools and builds on core ArcGIS functionality and uses geoprocessing capabilities to ensure extensibility. Utilization of COTS GIS core capabilities allows immediate use of model results in a variety of existing online applications and integration with other data sources and applications.The poster presents the use of this framework to downscale global hydrologic models to local hydraulic scale and post process the hydraulic modeling results and generate floodplains at any local resolution. Flow forecasts from ECMWF or WRF-Hydro are downscaled and combined with other ancillary data for input into the RAPID flood routing model. RAPID model results (stream flow along each reach) are ingested into a GIS-based scale dependent stream network database for efficient flow utilization and visualization over space and time. Once the flows are known at localized reaches, the tools can be used to derive the floodplain depth and extent for each time step in the forecast at any available local resolution. If existing rating curves are available they can be used to relate the flow to the depth of flooding, or synthetic rating curves can be derived using the tools in the toolkit and some ancillary data/assumptions. The results can be published as time-enabled spatial services to be consumed by web applications that use floodplain information as an input. Some of the existing online presentation templates can be easily combined with available online demographic and infrastructure data to present the impact of the potential floods on the local community through simple, end user products. This framework has been successfully used in both the data rich environments as well as in locales with minimum available spatial and hydrographic data.

Evaluation of SOVAT: an OLAP-GIS decision support system for community health assessment data analysis.

PubMed

Scotch, Matthew; Parmanto, Bambang; Monaco, Valerie

2008-06-09

Data analysis in community health assessment (CHA) involves the collection, integration, and analysis of large numerical and spatial data sets in order to identify health priorities. Geographic Information Systems (GIS) enable for management and analysis using spatial data, but have limitations in performing analysis of numerical data because of its traditional database architecture.On-Line Analytical Processing (OLAP) is a multidimensional datawarehouse designed to facilitate querying of large numerical data. Coupling the spatial capabilities of GIS with the numerical analysis of OLAP, might enhance CHA data analysis. OLAP-GIS systems have been developed by university researchers and corporations, yet their potential for CHA data analysis is not well understood. To evaluate the potential of an OLAP-GIS decision support system for CHA problem solving, we compared OLAP-GIS to the standard information technology (IT) currently used by many public health professionals. SOVAT, an OLAP-GIS decision support system developed at the University of Pittsburgh, was compared against current IT for data analysis for CHA. For this study, current IT was considered the combined use of SPSS and GIS ("SPSS-GIS"). Graduate students, researchers, and faculty in the health sciences at the University of Pittsburgh were recruited. Each round consisted of: an instructional video of the system being evaluated, two practice tasks, five assessment tasks, and one post-study questionnaire. Objective and subjective measurement included: task completion time, success in answering the tasks, and system satisfaction. Thirteen individuals participated. Inferential statistics were analyzed using linear mixed model analysis. SOVAT was statistically significant (alpha = .01) from SPSS-GIS for satisfaction and time (p < .002). Descriptive results indicated that participants had greater success in answering the tasks when using SOVAT as compared to SPSS-GIS. Using SOVAT, tasks were completed more efficiently, with a higher rate of success, and with greater satisfaction, than the combined use of SPSS and GIS. The results from this study indicate a potential for OLAP-GIS decision support systems as a valuable tool for CHA data analysis.

Evaluation of SOVAT: An OLAP-GIS decision support system for community health assessment data analysis

PubMed Central

Scotch, Matthew; Parmanto, Bambang; Monaco, Valerie

2008-01-01

Background Data analysis in community health assessment (CHA) involves the collection, integration, and analysis of large numerical and spatial data sets in order to identify health priorities. Geographic Information Systems (GIS) enable for management and analysis using spatial data, but have limitations in performing analysis of numerical data because of its traditional database architecture. On-Line Analytical Processing (OLAP) is a multidimensional datawarehouse designed to facilitate querying of large numerical data. Coupling the spatial capabilities of GIS with the numerical analysis of OLAP, might enhance CHA data analysis. OLAP-GIS systems have been developed by university researchers and corporations, yet their potential for CHA data analysis is not well understood. To evaluate the potential of an OLAP-GIS decision support system for CHA problem solving, we compared OLAP-GIS to the standard information technology (IT) currently used by many public health professionals. Methods SOVAT, an OLAP-GIS decision support system developed at the University of Pittsburgh, was compared against current IT for data analysis for CHA. For this study, current IT was considered the combined use of SPSS and GIS ("SPSS-GIS"). Graduate students, researchers, and faculty in the health sciences at the University of Pittsburgh were recruited. Each round consisted of: an instructional video of the system being evaluated, two practice tasks, five assessment tasks, and one post-study questionnaire. Objective and subjective measurement included: task completion time, success in answering the tasks, and system satisfaction. Results Thirteen individuals participated. Inferential statistics were analyzed using linear mixed model analysis. SOVAT was statistically significant (α = .01) from SPSS-GIS for satisfaction and time (p < .002). Descriptive results indicated that participants had greater success in answering the tasks when using SOVAT as compared to SPSS-GIS. Conclusion Using SOVAT, tasks were completed more efficiently, with a higher rate of success, and with greater satisfaction, than the combined use of SPSS and GIS. The results from this study indicate a potential for OLAP-GIS decision support systems as a valuable tool for CHA data analysis. PMID:18541037

GIS as a vital tool for Environmental Impact Assessment and Mitigation

NASA Astrophysics Data System (ADS)

Gharehbaghi, Koorosh; Scott-Young, Christina

2018-03-01

Environmental Impact Assessment (EIA) is a course of action which provides information to various stakeholders such as planners and relevant authorities about the planned development and its subsequent effects of the environment and the immediate ambiances. Furthermore, the EIA and mitigation are the inclusive process of collecting, analyzing information and the determination of the application for development or construction approval, which could be accessible by the concerned communities and organizations. Although the set regulations of EIA and mitigation vary from jurisdictions, they are, however, very precise and need to be integrated with the specific geographical data. In addition, the Geographical Information System (GIS) is a software intended to encapsulate and present all types of physical, biological, environmental, ecological and geological information. Conversely, GIS is the integration of statistical analysis and information technology, and can also be further broken down into two different categories of; Topological Modelling and Map overlay. To ensure that the EIA and mitigation are receptive the GIS will provide the decisive apparatus. Using GIS not only improves the overall EIA and mitigation process, but also provides valuable mapping strategies, including holistic environmental system approach. Accordingly, the main objective of this paper is to discuss the importance of the GIS and Environmental Data integration progression, to further enhance the overall EIA and Mitigation processes.

Research on agricultural ecology and environment analysis and modeling based on RS and GIS

NASA Astrophysics Data System (ADS)

Zhang, Wensheng; Chen, Hongfu; Wang, Mingsheng

2009-07-01

Analysis of agricultural ecology and environment is based on the data of agricultural resources, which are obtained by RS monitoring. The over-exploitation of farmlands will cause structural changes of the soil composition, and damage the planting environment and the agro-ecosystem. Through the research on the dynamic monitoring methods of multitemporal RS images and GIS technology, the crop growth status, crop acreage and other relevant information in agricultural production are extracted based on the monitor and analysis of the conditions of the fields and crop growth. The agro-ecological GIS platform is developed with the establishment of the agricultural resources management database, which manages spatial data, RS data and attribute data of agricultural resources. Using the RS, GIS analysis results, the reasons of agro-ecological destruction are analyzed and the evaluation methods are established. This paper puts forward the concept of utilization capacity of farmland, which describes farmland space for development and utilization that is influenced by the conditions of the land, water resources, climate, pesticides and chemical fertilizers and many other agricultural production factors. Assessment model of agricultural land use capacity is constructed with the help of Fuzzy. Assessing the utilization capacity of farmland can be helpful to agricultural production and ecological protection of farmland. This paper describes the application of the capacity evaluation model with simulated data in two aspects, namely, in evaluating the status of farmland development and utilization and in optimal planting.

Development of water environment information management and water pollution accident response system

NASA Astrophysics Data System (ADS)

Zhang, J.; Ruan, H.

2009-12-01

In recent years, many water pollution accidents occurred with the rapid economical development. In this study, water environment information management and water pollution accident response system are developed based on geographic information system (GIS) techniques. The system integrated spatial database, attribute database, hydraulic model, and water quality model under a user-friendly interface in a GIS environment. System ran in both Client/Server (C/S) and Browser/Server (B/S) platform which focused on model and inquiry respectively. System provided spatial and attribute data inquiry, water quality evaluation, statics, water pollution accident response case management (opening reservoir etc) and 2D and 3D visualization function, and gave assistant information to make decision on water pollution accident response. Polluted plume in Huaihe River were selected to simulate the transport of pollutes.

The GIS Weasel: An interface for the development of geographic information used in environmental simulation modeling

USGS Publications Warehouse

Viger, R.J.

2008-01-01

The GIS Weasel is a freely available, open-source software package built on top of ArcInfo Workstation?? [ESRI, Inc., 2001, ArcInfo Workstation (8.1 ed.), Redlands, CA] for creating maps and parameters of geographic features used in environmental simulation models. The software has been designed to minimize the need for GIS expertise and automate the preparation of the geographic information as much as possible. Although many kinds of data can be exploited with the GIS Weasel, the only information required is a raster dataset of elevation for the user's area of interest (AOI). The user-defined AOI serves as a starting point from which to create maps of many different types of geographic features, including sub-watersheds, streams, elevation bands, land cover patches, land parcels, or anything else that can be discerned from the available data. The GIS Weasel has a library of over 200 routines that can be applied to any raster map of geographic features to generate information about shape, area, or topological association with other features of the same or different maps. In addition, a wide variety of parameters can be derived using ancillary data layers such as soil and vegetation maps.

Geospatial Modelling Approach for 3d Urban Densification Developments

NASA Astrophysics Data System (ADS)

Koziatek, O.; Dragićević, S.; Li, S.

2016-06-01

With growing populations, economic pressures, and the need for sustainable practices, many urban regions are rapidly densifying developments in the vertical built dimension with mid- and high-rise buildings. The location of these buildings can be projected based on key factors that are attractive to urban planners, developers, and potential buyers. Current research in this area includes various modelling approaches, such as cellular automata and agent-based modelling, but the results are mostly linked to raster grids as the smallest spatial units that operate in two spatial dimensions. Therefore, the objective of this research is to develop a geospatial model that operates on irregular spatial tessellations to model mid- and high-rise buildings in three spatial dimensions (3D). The proposed model is based on the integration of GIS, fuzzy multi-criteria evaluation (MCE), and 3D GIS-based procedural modelling. Part of the City of Surrey, within the Metro Vancouver Region, Canada, has been used to present the simulations of the generated 3D building objects. The proposed 3D modelling approach was developed using ESRI's CityEngine software and the Computer Generated Architecture (CGA) language.

Bim-Gis Integrated Geospatial Information Model Using Semantic Web and Rdf Graphs

NASA Astrophysics Data System (ADS)

Hor, A.-H.; Jadidi, A.; Sohn, G.

2016-06-01

In recent years, 3D virtual indoor/outdoor urban modelling becomes a key spatial information framework for many civil and engineering applications such as evacuation planning, emergency and facility management. For accomplishing such sophisticate decision tasks, there is a large demands for building multi-scale and multi-sourced 3D urban models. Currently, Building Information Model (BIM) and Geographical Information Systems (GIS) are broadly used as the modelling sources. However, data sharing and exchanging information between two modelling domains is still a huge challenge; while the syntactic or semantic approaches do not fully provide exchanging of rich semantic and geometric information of BIM into GIS or vice-versa. This paper proposes a novel approach for integrating BIM and GIS using semantic web technologies and Resources Description Framework (RDF) graphs. The novelty of the proposed solution comes from the benefits of integrating BIM and GIS technologies into one unified model, so-called Integrated Geospatial Information Model (IGIM). The proposed approach consists of three main modules: BIM-RDF and GIS-RDF graphs construction, integrating of two RDF graphs, and query of information through IGIM-RDF graph using SPARQL. The IGIM generates queries from both the BIM and GIS RDF graphs resulting a semantically integrated model with entities representing both BIM classes and GIS feature objects with respect to the target-client application. The linkage between BIM-RDF and GIS-RDF is achieved through SPARQL endpoints and defined by a query using set of datasets and entity classes with complementary properties, relationships and geometries. To validate the proposed approach and its performance, a case study was also tested using IGIM system design.

Towards a Dynamic Digital Observatory: Synthesizing Community Data and Model Development in the Susquehanna River Basin and Chesapeake Bay

NASA Astrophysics Data System (ADS)

Dressler, K. A.; Piasecki, M.; Bhatt, G.; Duffy, C. J.; Reed, P. M.

2007-12-01

Physically-based fully-distributed hydrologic models simulate hydrologic state variables spatiotemporally using information on forcing (climate) and landscape (topography, land use, hydrogeology) heterogeneities. Incorporating physical data layers in the hydrologic model requires intensive data development. Traditionally, GIS has been used for data management, data analysis and visualization; however, proprietary data structures, platform dependence, isolated data model and non-dynamic data-interaction with pluggable software components of existing GIS frameworks, makes it restrictive to perform sophisticated numerical modeling. In this effort we present a "tightly-coupled" GIS interface to Penn State Integrated Hydrologic Model (PIHM; www.pihm.psu.edu) called PIHMgis which is open source, platform independent and extensible. The tight coupling between GIS and the model is achieved by developing a shared data-model and hydrologic-model data structure. Domain discretization is fundamental to the approach and an unstructured triangular irregular network (e.g. Delaunay triangles) is generated with both geometric and parametric constraints. A local prismatic control volume is formed by vertical projection of the Delaunay triangles forming each layer of the model. Given a set of constraints (e.g. river network support, watershed boundary, altitude zones, ecological regions, hydraulic properties, climate zones, etc), an "optimal" mesh is generated. Time variant forcing for the model is typically derived from time series data available at points that are transferred onto a grid. Therefore, the modeling environment can use the Observations Database model developed by the Hydrologic Information Systems group of the Consortium of Universities for the Advancement of Hydrologic Sciences, Inc. (CUAHSI). As part of a initial testbed series the database has been implemented in support for the Susquehanna and Chesapeake Bay watersheds and is now being populated by national (USGS-NWIS; EPA- STORET), regional (Chesapeake Information Management System, CIMS; National Air Deposition Program, NADP), and local (RTH-Net, Burd Run) datasets. The data can be searched side by side in a one-stop-querying- center, www.hydroseek.org , another application developed as part of the CUAHSI HIS effort. The ultimate goal is to populate the observations database with as many catalogues (i.e. collections of information on what data sources contain) as possible including the build out of the local data sources, i.e. the Susquehanna River Basin Hydrologic Observatory System (SRBHOS) time series server.

Support time-dependent transformations for surveying and GIS : current status and upcoming challenges

NASA Astrophysics Data System (ADS)

Mahmoudabadi, H.; Lercier, D.; Vielliard, S.; Mein, N.; Briggs, G.

2016-12-01

The support of time-dependent transformations for surveying and GIS is becoming a critical issue. We need to convert positions from the realizations of the International Terrestrial Reference Frame to any national reference frame. This problem is easy to solve when all of the required information is available. But it becomes really complicated in a worldwide context. We propose an overview of the current ITRF-aligned reference frames and we describe a global solution to support time-dependent transformations between them and the International Terrestrial Reference Frame. We focus on the uncertainties of station velocities used. In a first approximation, we use a global tectonic plate model to calculate point velocities. We show the impact of the velocity model on the coordinate accuracies. Several countries, particularly in active regions, are developing semi-dynamic reference frames. These frames include local displacement models updated regularly and/or after major events (such as earthquakes). Their integration into surveying or GIS applications is an upcoming challenge. We want to encourage the geodetic community to develop and use standard formats.

A GIS-based framework for evaluating investments in fire management: Spatial allocation of recreation values

Treesearch

Kenneth A. Baerenklau; Armando González-Cabán; Catrina I. Páez; Edgard Chávez

2009-01-01

The U.S. Forest Service is responsible for developing tools to facilitate effective and efficient fire management on wildlands and urban-wildland interfaces. Existing GIS-based fire modeling software only permits estimation of the costs of fire prevention and mitigation efforts as well as the effects of those efforts on fire behavior. This research demonstrates how the...

An Overview of the GIS Weasel

USGS Publications Warehouse

Viger, Roland J.

2008-01-01

This fact sheet provides a high-level description of the GIS Weasel, a software system designed to aid users in preparing spatial information as input to lumped and distributed parameter environmental simulation models (ESMs). The GIS Weasel provides geographic information system (GIS) tools to help create maps of geographic features relevant to the application of a user?s ESM and to generate parameters from those maps. The operation of the GIS Weasel does not require a user to be a GIS expert, only that a user has an understanding of the spatial information requirements of the model. The GIS Weasel software system provides a GIS-based graphical user interface (GUI), C programming language executables, and general utility scripts. The software will run on any computing platform where ArcInfo Workstation (version 8.1 or later) and the GRID extension are accessible. The user controls the GIS Weasel by interacting with menus, maps, and tables.

Evaluating the Potential of Commercial GIS for Accelerator Configuration Management

DOE Office of Scientific and Technical Information (OSTI.GOV)

T.L. Larrieu; Y.R. Roblin; K. White

2005-10-10

The Geographic Information System (GIS) is a tool used by industries needing to track information about spatially distributed assets. A water utility, for example, must know not only the precise location of each pipe and pump, but also the respective pressure rating and flow rate of each. In many ways, an accelerator such as CEBAF (Continuous Electron Beam Accelerator Facility) can be viewed as an ''electron utility''. Whereas the water utility uses pipes and pumps, the ''electron utility'' uses magnets and RF cavities. At Jefferson lab we are exploring the possibility of implementing ESRI's ArcGIS as the framework for buildingmore » an all-encompassing accelerator configuration database that integrates location, configuration, maintenance, and connectivity details of all hardware and software. The possibilities of doing so are intriguing. From the GIS, software such as the model server could always extract the most-up-to-date layout information maintained by the Survey & Alignment for lattice modeling. The Mechanical Engineering department could use ArcGIS tools to generate CAD drawings of machine segments from the same database. Ultimately, the greatest benefit of the GIS implementation could be to liberate operators and engineers from the limitations of the current system-by-system view of machine configuration and allow a more integrated regional approach. The commercial GIS package provides a rich set of tools for database-connectivity, versioning, distributed editing, importing and exporting, and graphical analysis and querying, and therefore obviates the need for much custom development. However, formidable challenges to implementation exist and these challenges are not only technical and manpower issues, but also organizational ones. The GIS approach would crosscut organizational boundaries and require departments, which heretofore have had free reign to manage their own data, to cede some control and agree to a centralized framework.« less

Gis-Based Smart Cartography Using 3d Modeling

NASA Astrophysics Data System (ADS)

Malinverni, E. S.; Tassetti, A. N.

2013-08-01

3D City Models have evolved to be important tools for urban decision processes and information systems, especially in planning, simulation, analysis, documentation and heritage management. On the other hand existing and in use numerical cartography is often not suitable to be used in GIS because not geometrically and topologically correctly structured. The research aim is to 3D structure and organize a numeric cartography for GIS and turn it into CityGML standardized features. The work is framed around a first phase of methodological analysis aimed to underline which existing standard (like ISO and OGC rules) can be used to improve the quality requirement of a cartographic structure. Subsequently, from this technical specifics, it has been investigated the translation in formal contents, using an owner interchange software (SketchUp), to support some guide lines implementations to generate a GIS3D structured in GML3. It has been therefore predisposed a test three-dimensional numerical cartography (scale 1:500, generated from range data captured by 3D laser scanner), tested on its quality according to the previous standard and edited when and where necessary. Cad files and shapefiles are converted into a final 3D model (Google SketchUp model) and then exported into a 3D city model (CityGML LoD1/LoD2). The GIS3D structure has been managed in a GIS environment to run further spatial analysis and energy performance estimate, not achievable in a 2D environment. In particular geometrical building parameters (footprint, volume etc.) are computed and building envelop thermal characteristics are derived from. Lastly, a simulation is carried out to deal with asbestos and home renovating charges and show how the built 3D city model can support municipal managers with risk diagnosis of the present situation and development of strategies for a sustainable redevelop.

Applying GIS and high performance agent-based simulation for managing an Old World Screwworm fly invasion of Australia.

PubMed

Welch, M C; Kwan, P W; Sajeev, A S M

2014-10-01

Agent-based modelling has proven to be a promising approach for developing rich simulations for complex phenomena that provide decision support functions across a broad range of areas including biological, social and agricultural sciences. This paper demonstrates how high performance computing technologies, namely General-Purpose Computing on Graphics Processing Units (GPGPU), and commercial Geographic Information Systems (GIS) can be applied to develop a national scale, agent-based simulation of an incursion of Old World Screwworm fly (OWS fly) into the Australian mainland. The development of this simulation model leverages the combination of massively data-parallel processing capabilities supported by NVidia's Compute Unified Device Architecture (CUDA) and the advanced spatial visualisation capabilities of GIS. These technologies have enabled the implementation of an individual-based, stochastic lifecycle and dispersal algorithm for the OWS fly invasion. The simulation model draws upon a wide range of biological data as input to stochastically determine the reproduction and survival of the OWS fly through the different stages of its lifecycle and dispersal of gravid females. Through this model, a highly efficient computational platform has been developed for studying the effectiveness of control and mitigation strategies and their associated economic impact on livestock industries can be materialised. Copyright © 2014 International Atomic Energy Agency 2014. Published by Elsevier B.V. All rights reserved.

Graduate Ethics Curricula for Future Geospatial Technology Professionals (Invited)

NASA Astrophysics Data System (ADS)

Wright, D. J.; Dibiase, D.; Harvey, F.; Solem, M.

2009-12-01

Professionalism in today's rapidly-growing, multidisciplinary geographic information science field (e.g., geographic information systems or GIS, remote sensing, cartography, quantitative spatial analysis), now involves a commitment to ethical practice as informed by a more sophisticated understanding of the ethical implications of geographic technologies. The lack of privacy introduced by mobile mapping devices, the use of GIS for military and surveillance purposes, the appropriate use of data collected using these technologies for policy decisions (especially for conservation and sustainability) and general consequences of inequities that arise through biased access to geospatial tools and derived data all continue to be challenging issues and topics of deep concern for many. Students and professionals working with GIS and related technologies should develop a sound grasp of these issues and a thorough comprehension of the concerns impacting their use and development in today's world. However, while most people agree that ethics matters for GIS, we often have difficulty putting ethical issues into practice. An ongoing project supported by NSF seeks to bridge this gap by providing a sound basis for future ethical consideration of a variety of issues. A model seminar curriculum is under development by a team of geographic information science and technology (GIS&T) researchers and professional ethicists, along with protocols for course evaluations. In the curricula students first investigate the nature of professions in general and the characteristics of a GIS&T profession in particular. They hone moral reasoning skills through methodical analyses of case studies in relation to various GIS Code of Ethics and Rules of Conduct. They learn to unveil the "moral ecologies" of a profession through actual interviews with real practitioners in the field. Assignments thus far include readings, class discussions, practitioner interviews, and preparations of original case studies. Curricula thus far are freely available via gisprofessionalethics.org.

DEVELOPMENT OF A WATERSHED-BASED MERCURY POLLUTION CHARACTERIZATION SYSTEM

EPA Science Inventory

To investigate total mercury loadings to streams in a watershed, we have developed a watershed-based source quantification model ? Watershed Mercury Characterization System. The system uses the grid-based GIS modeling technology to calculate total soil mercury concentrations and ...

Dose-Response Calculator for ArcGIS

USGS Publications Warehouse

Hanser, Steven E.; Aldridge, Cameron L.; Leu, Matthias; Nielsen, Scott E.

2011-01-01

The Dose-Response Calculator for ArcGIS is a tool that extends the Environmental Systems Research Institute (ESRI) ArcGIS 10 Desktop application to aid with the visualization of relationships between two raster GIS datasets. A dose-response curve is a line graph commonly used in medical research to examine the effects of different dosage rates of a drug or chemical (for example, carcinogen) on an outcome of interest (for example, cell mutations) (Russell and others, 1982). Dose-response curves have recently been used in ecological studies to examine the influence of an explanatory dose variable (for example, percentage of habitat cover, distance to disturbance) on a predicted response (for example, survival, probability of occurrence, abundance) (Aldridge and others, 2008). These dose curves have been created by calculating the predicted response value from a statistical model at different levels of the explanatory dose variable while holding values of other explanatory variables constant. Curves (plots) developed using the Dose-Response Calculator overcome the need to hold variables constant by using values extracted from the predicted response surface of a spatially explicit statistical model fit in a GIS, which include the variation of all explanatory variables, to visualize the univariate response to the dose variable. Application of the Dose-Response Calculator can be extended beyond the assessment of statistical model predictions and may be used to visualize the relationship between any two raster GIS datasets (see example in tool instructions). This tool generates tabular data for use in further exploration of dose-response relationships and a graph of the dose-response curve.

Systematic plan of building Web geographic information system based on ActiveX control

NASA Astrophysics Data System (ADS)

Zhang, Xia; Li, Deren; Zhu, Xinyan; Chen, Nengcheng

2003-03-01

A systematic plan of building Web Geographic Information System (WebGIS) using ActiveX technology is proposed in this paper. In the proposed plan, ActiveX control technology is adopted in building client-side application, and two different schemas are introduced to implement communication between controls in users¡ browser and middle application server. One is based on Distribute Component Object Model (DCOM), the other is based on socket. In the former schema, middle service application is developed as a DCOM object that communicates with ActiveX control through Object Remote Procedure Call (ORPC) and accesses data in GIS Data Server through Open Database Connectivity (ODBC). In the latter, middle service application is developed using Java language. It communicates with ActiveX control through socket based on TCP/IP and accesses data in GIS Data Server through Java Database Connectivity (JDBC). The first one is usually developed using C/C++, and it is difficult to develop and deploy. The second one is relatively easy to develop, but its performance of data transfer relies on Web bandwidth. A sample application is developed using the latter schema. It is proved that the performance of the sample application is better than that of some other WebGIS applications in some degree.

Digital Geology from field to 3D modelling and Google Earth virtual environment: methods and goals from the Furlo Gorge (Northern Apennines - Italy)

NASA Astrophysics Data System (ADS)

De Donatis, Mauro; Susini, Sara

2014-05-01

A new map of the Furlo Gorge was surveyed and elaborated in a digital way. In every step of work we used digital tools as mobile GIS and 3D modelling software. Phase 1st Starting in the lab, planning the field project development, base cartography, forms and data base were designed in the way we thought was the best for collecting and store data in order of producing a digital n­-dimensional map. Bedding attitudes, outcrops sketches and description, stratigraphic logs, structural features and other informations were collected and organised in a structured database using rugged tablet PC, GPS receiver, digital cameras and later also an Android smartphone with some survey apps in-­house developed. A new mobile GIS (BeeGIS) was developed starting from an open source GIS (uDig): a number of tools like GPS connection, pen drawing annotations, geonotes, fieldbook, photo synchronization and geotagging were originally designed. Phase 2nd After some month of digital field work, all the informations were elaborated for drawing a geologic map in GIS environment. For that we use both commercial (ArcGIS) and open source (gvSig, QGIS, uDig) without big technical problems. Phase 3rd When we get to the step of building a 3D model (using 3DMove), passing trough the assisted drawing of cross-­sections (2DMove), we discovered a number of problems in the interpretation of geological structures (thrusts, normal faults) and more in the interpretation of stratigraphic thickness and boundaries and their relationships with topography. Phase 4th Before an "on­-armchair" redrawing of map, we decide to go back to the field and check directly what was wrong. Two main vantages came from this: (1) the mistakes we found could be reinterpreted and corrected directly in the field having all digital tools we need; (2) previous interpretations could be stored in GIS layers keeping memory of the previous work (also mistakes). Phase 5th A 3D model built with 3D Move is already almost self­-consistent in showing the structural features of the study area. The work was not so straightforward, but the result is more then satisfying, even if some limitations were not solved (i.e. visualisation of bedding attitudes). Geological maps are fundamental for knowledge transfer among experts but, if combined with the innovative digital methods from survey to 3D model, this knowledges could reach a much larger number of people, allowing a cultural growth and the establishment of a larger awareness of the Earth and Environment.

A female black bear denning habitat model using a geographic information system

USGS Publications Warehouse

Clark, J.D.; Hayes, S.G.; Pledger, J.M.

1998-01-01

We used the Mahalanobis distance statistic and a raster geographic information system (GIS) to model potential black bear (Ursus americanus) denning habitat in the Ouachita Mountains of Arkansas. The Mahalanobis distance statistic was used to represent the standard squared distance between sample variates in the GIS database (forest cover type, elevation, slope, aspect, distance to streams, distance to roads, and forest cover richness) and variates at known bear dens. Two models were developed: a generalized model for all den locations and another specific to dens in rock cavities. Differences between habitat at den sites and habitat across the study area were represented in 2 new GIS themes as Mahalanobis distance values. Cells similar to the mean vector derived from the known dens had low Mahalanobis distance values, and dissimilar cells had high values. The reliability of the predictive model was tested by overlaying den locations collected subsequent to original model development on the resultant den habitat themes. Although the generalized model demonstrated poor reliability, the model specific to rock dens had good reliability. Bears were more likely to choose rock den locations with low Mahalanobis distance values and less likely to choose those with high values. The model can be used to plan the timing and extent of management actions (e.g., road building, prescribed fire, timber harvest) most appropriate for those sites with high or low denning potential. 

GIS applications for military operations in coastal zones

USGS Publications Warehouse

Fleming, S.; Jordan, T.; Madden, M.; Usery, E.L.; Welch, R.

2009-01-01

In order to successfully support current and future US military operations in coastal zones, geospatial information must be rapidly integrated and analyzed to meet ongoing force structure evolution and new mission directives. Coastal zones in a military-operational environment are complex regions that include sea, land and air features that demand high-volume databases of extreme detail within relatively narrow geographic corridors. Static products in the form of analog maps at varying scales traditionally have been used by military commanders and their operational planners. The rapidly changing battlefield of 21st Century warfare, however, demands dynamic mapping solutions. Commercial geographic information system (GIS) software for military-specific applications is now being developed and employed with digital databases to provide customized digital maps of variable scale, content and symbolization tailored to unique demands of military units. Research conducted by the Center for Remote Sensing and Mapping Science at the University of Georgia demonstrated the utility of GIS-based analysis and digital map creation when developing large-scale (1:10,000) products from littoral warfare databases. The methodology employed-selection of data sources (including high resolution commercial images and Lidar), establishment of analysis/modeling parameters, conduct of vehicle mobility analysis, development of models and generation of products (such as a continuous sea-land DEM and geo-visualization of changing shorelines with tidal levels)-is discussed. Based on observations and identified needs from the National Geospatial-Intelligence Agency, formerly the National Imagery and Mapping Agency, and the Department of Defense, prototype GIS models for military operations in sea, land and air environments were created from multiple data sets of a study area at US Marine Corps Base Camp Lejeune, North Carolina. Results of these models, along with methodologies for developing large-scale littoral warfare databases, aid the National Geospatial-Intelligence Agency in meeting littoral warfare analysis, modeling and map generation requirements for US military organizations. ?? 2008 International Society for Photogrammetry and Remote Sensing, Inc. (ISPRS).

GIS applications for military operations in coastal zones

NASA Astrophysics Data System (ADS)

Fleming, S.; Jordan, T.; Madden, M.; Usery, E. L.; Welch, R.

In order to successfully support current and future US military operations in coastal zones, geospatial information must be rapidly integrated and analyzed to meet ongoing force structure evolution and new mission directives. Coastal zones in a military-operational environment are complex regions that include sea, land and air features that demand high-volume databases of extreme detail within relatively narrow geographic corridors. Static products in the form of analog maps at varying scales traditionally have been used by military commanders and their operational planners. The rapidly changing battlefield of 21st Century warfare, however, demands dynamic mapping solutions. Commercial geographic information system (GIS) software for military-specific applications is now being developed and employed with digital databases to provide customized digital maps of variable scale, content and symbolization tailored to unique demands of military units. Research conducted by the Center for Remote Sensing and Mapping Science at the University of Georgia demonstrated the utility of GIS-based analysis and digital map creation when developing large-scale (1:10,000) products from littoral warfare databases. The methodology employed-selection of data sources (including high resolution commercial images and Lidar), establishment of analysis/modeling parameters, conduct of vehicle mobility analysis, development of models and generation of products (such as a continuous sea-land DEM and geo-visualization of changing shorelines with tidal levels)-is discussed. Based on observations and identified needs from the National Geospatial-Intelligence Agency, formerly the National Imagery and Mapping Agency, and the Department of Defense, prototype GIS models for military operations in sea, land and air environments were created from multiple data sets of a study area at US Marine Corps Base Camp Lejeune, North Carolina. Results of these models, along with methodologies for developing large-scale littoral warfare databases, aid the National Geospatial-Intelligence Agency in meeting littoral warfare analysis, modeling and map generation requirements for US military organizations.

The Romanian contribution to the COST action TU0801 "Semantic enrichment of 3D city models for sustainable urban development"

NASA Astrophysics Data System (ADS)

Armas, Iuliana; Bostenaru Dan, Maria

2010-05-01

The COST action TU0801 "Semantic enrichment of 3D city models for sustainable urban development" aims at using ontologies to enrich three dimensional models of cities. Such models can be used for various purposes, one of them being disaster management. COST actions are European networks of nationally funded projects, the European Science Foundation funding the networking activities. Romania adhered to the above mentioned COST action in 2009, the nationally funded project being concerned with the use of GIS for the vulnerability to hazards of the city of Bucharest. Among the networking activites Romanian representatives participated in are a training school on 3D GIS for disaster management (with two trainees) and a working group and management committee meeting. It is aimed to further develop the issues of usability and guidance of semantically enriched city models as task from the working group within the Action for the nationally funded project. In this contribution there will be shown how it is aimed to achieve this. One of the issues is on how to extrude GIS to achieve a simple 3D representation for a pilot area in the historic centre of Bucharest. Another one is on how to use this for the study of urbanism aspects, ranging from visual urban composition to the complex 3D aspects in restoration projects, including addition of new floors to buildings.

Use of the AGNPS model to assess impacts of development and best management practices in an urban watershed

NASA Astrophysics Data System (ADS)

Cross, J. A.

2006-12-01

A Geographical Information System (GIS) is an invaluable tool in the estimation of land use changes and spatial variability in urban areas. (Non-Point Source (NPS) models provide hypothetical opportunities to assess impacts which storm water management strategies and land use changes have on watersheds by predicting loadings on a watershed scale. This study establishes a methodology for analyzing land use changes and management associated with them by utilizing a GIS analysis of impervious surfaces and AGricultural Non- Point Source (AGNPS) modeling. The GIS analysis of Total Impervious Area (TIA) was used to quantify increases in development and provided land use data for use in AGNPS modeling in a small artificially- delineated urban watershed. AGNPS modeling was executed in several different scenarios to predict changes in NPS loadings associated with increases in TIA and its subsequent management in a small artificially- delineated urban watershed. Data editing, creation and extracting was completed using ArcView (3.2) GeoMedia (6) GIS systems. The GIS analysis quantified the increase in urbanization via TIA within the Bluebonnet Swamp Watershed (BSW) in East Baton Rouge Parish (EBRP), Louisiana. The BSW had significant increases in urbanization in the 8 year time span of 1996 2004 causing and increase in quantity and decrease in quality of subsequent runoff. Datasets made available from the GIS analysis included TIA and the change in percentage from 1996 to 2004. This information is fundamental for the AGNPS model because it was used to calculate TIA percentages within each AGNPS cell. A 30 year daily climate file was used to execute AGNPS in different land use and storm water management scenarios within the 1100 acre BSW. Runoff qualities and quantities were then compared for different periods of 1996 and 2004. Predictions of sediment, erosion and runoff were compared according by scenario year. Management practices were also simulated by changing the Runoff Curve Number (RCN) within AGNPS and their results were also compared. This study provides an aid to planners and managers in estimating increases in urbanization by artificially- delineated watershed. It also in illustrates how to use AGNPS to predict NPS pollution and the influence that change in TIA, land use and storm water management strategies have on sediment loadings, erosion and runoff in a watershed.

Real time hydro-metereological hazards monitoring system for the Ravenna municipality

NASA Astrophysics Data System (ADS)

Bertoni, W.; Cattarossi, A.; Gonella, M.

2003-04-01

The Ravenna municipality (Italy, Emilia Romagna region), through a cooperative agreement with ENI S.p.A’s., AGIP division, is carrying out a research study for the development of a real time monitoring system of hydro-meteorological conditions. The system aims to support the city Crisis Response Unit to provide more efficient support all over the municipal territory that is the largest in Italy with more than 700 km2. The support unit, a GIS computer based application, directly links to a broad range of sources, gathering real time information from a Local Area Model (meteorological data), a Wave Model (sea hydrodynamic circulation), monitoring stations, located partially on the Adriatic sea (AGIP offshore platform, SIMN) and partially over the Ravenna inland (SPDS, SIN). In the first phase, now completed and undergoing testing, this vast and diversified collection of data feeds a number of statistical models with up to 72 hours of forecast capabilities. The GIS application displays actual and forecast sea conditions offshore of Ravenna littorals in addition to actual and forecast flood conditions along the Ravenna Province inland. Model generated data are used for the forecast, which is then calibrated using the measured data. When the predefined warning limits are exceeded, end users are alerted via prerecorded phone messages, SMS, or visually through the direct or remote interaction with the GIS system (remotely accessible via portable computers). In the second stage, the statistical approach will be substituted by a more deterministic approach. A coupled hydrologic-hydraulic model will be used to forecast water stages along rivers and runoff volume along major watersheds. Moreover, already functioning capabilities allows direct control of remote monitoring points (stream and rain gages, etc.) The entire Real Time Monitoring System was developed on a GIS platform. The GEOdatabase, a relational database based on MSDE technology, is the core of the application which revolves around the conceptualization of a Hydro Data Model, a standardized way to store hydraulic based data such as watershed delineation, hydrologic network, monitoring points and time series data. Recent advancement in GIS software technologies and ready to use hydro-meteorological data offer an unprecedented opportunity to customize the GIS application and provide a powerful application to prevent and defeat flood hazards.

The Estrada Real project and endemic diseases: the case of schistosomiasis, geoprocessing and tourism.

PubMed

Carvalho, Omar S; Scholte, Ronaldo G C; Guimarães, Ricardo J P S; Freitas, Corina C; Drummond, Sandra C; Amaral, Ronaldo S; Dutra, Luciano V; Oliveira, Guilherme; Massara, Cristiano L; Enk, Martin J

2010-07-01

Geographical Information System (GIS) is a tool that has recently been applied to better understand spatial disease distributions. Using meteorological, social, sanitation, mollusc distribution data and remote sensing variables, this study aimed to further develop the GIS technology by creating a model for the spatial distribution of schistosomiasis and to apply this model to an area with rural tourism in the Brazilian state of Minas Gerais (MG). The Estrada Real, covering about 1,400 km, is the largest and most important Brazilian tourism project, involving 163 cities in MG with different schistosomiasis prevalence rates. The model with three variables showed a R(2) = 0.34, with a standard deviation of risk estimated adequate for public health needs. The main variables selected for modelling were summer vegetation, summer minimal temperature and winter minimal temperature. The results confirmed the importance of Remote Sensing data and the valuable contribution of GIS in identifying priority areas for intervention in tourism regions which are endemic to schistosomiasis.

Using a coupled eco-hydrodynamic model to predict habitat for target species following dam removal

USGS Publications Warehouse

Tomsic, C.A.; Granata, T.C.; Murphy, R.P.; Livchak, C.J.

2007-01-01

A habitat suitability index (HSI) model was developed for a water quality sensitive fish (Greater Redhorse) and macroinvertebrate (Plecoptera) species to determine the restoration success of the St. John Dam removal for the Sandusky River (Ohio). An ArcGIS?? model was created for pre- and post-dam removal scenarios. Inputs to the HSI model consist of substrate distributions from river surveys, and water level and velocity time series, outputs from a hydrodynamic model. The ArcGIS?? model predicted habitat suitability indices at 45 river cross-sections in the hydrodynamic model. The model was programmed to produce polygon layers, using graphical user interfaces that were displayed in the ArcGIS?? environment. The results of the model clearly show an increase of habitat suitability from pre- to post-dam removal periods and in the former reservoir. The change in suitability of the model is attributed mostly to the change in depth in the river following the dam removal for both the fish and invertebrate species. The results of the invertebrate model followed the same positive trend as species enumerations from the river basin. ?? 2007 Elsevier B.V. All rights reserved.

Complementarity of Historic Building Information Modelling and Geographic Information Systems

NASA Astrophysics Data System (ADS)

Yang, X.; Koehl, M.; Grussenmeyer, P.; Macher, H.

2016-06-01

In this paper, we discuss the potential of integrating both semantically rich models from Building Information Modelling (BIM) and Geographical Information Systems (GIS) to build the detailed 3D historic model. BIM contributes to the creation of a digital representation having all physical and functional building characteristics in several dimensions, as e.g. XYZ (3D), time and non-architectural information that are necessary for construction and management of buildings. GIS has potential in handling and managing spatial data especially exploring spatial relationships and is widely used in urban modelling. However, when considering heritage modelling, the specificity of irregular historical components makes it problematic to create the enriched model according to its complex architectural elements obtained from point clouds. Therefore, some open issues limiting the historic building 3D modelling will be discussed in this paper: how to deal with the complex elements composing historic buildings in BIM and GIS environment, how to build the enriched historic model, and why to construct different levels of details? By solving these problems, conceptualization, documentation and analysis of enriched Historic Building Information Modelling are developed and compared to traditional 3D models aimed primarily for visualization.

Traffic & safety statewide model and GIS modeling.

DOT National Transportation Integrated Search

2012-07-01

Several steps have been taken over the past two years to advance the Utah Department of Transportation (UDOT) safety initiative. Previous research projects began the development of a hierarchical Bayesian model to analyze crashes on Utah roadways. De...

Seismic hazard assessment of Syria using seismicity, DEM, slope, active tectonic and GIS

NASA Astrophysics Data System (ADS)

Ahmad, Raed; Adris, Ahmad; Singh, Ramesh

2016-07-01

In the present work, we discuss the use of an integrated remote sensing and Geographical Information System (GIS) techniques for evaluation of seismic hazard areas in Syria. The present study is the first time effort to create seismic hazard map with the help of GIS. In the proposed approach, we have used Aster satellite data, digital elevation data (30 m resolution), earthquake data, and active tectonic maps. Many important factors for evaluation of seismic hazard were identified and corresponding thematic data layers (past earthquake epicenters, active faults, digital elevation model, and slope) were generated. A numerical rating scheme has been developed for spatial data analysis using GIS to identify ranking of parameters to be included in the evaluation of seismic hazard. The resulting earthquake potential map delineates the area into different relative susceptibility classes: high, moderate, low and very low. The potential earthquake map was validated by correlating the obtained different classes with the local probability that produced using conventional analysis of observed earthquakes. Using earthquake data of Syria and the peak ground acceleration (PGA) data is introduced to the model to develop final seismic hazard map based on Gutenberg-Richter (a and b values) parameters and using the concepts of local probability and recurrence time. The application of the proposed technique in Syrian region indicates that this method provides good estimate of seismic hazard map compared to those developed from traditional techniques (Deterministic (DSHA) and probabilistic seismic hazard (PSHA). For the first time we have used numerous parameters using remote sensing and GIS in preparation of seismic hazard map which is found to be very realistic.

When GIS zooms in: spatio-genetic maps of multipaternity in Armadillidium vulgare.

PubMed

Bech, Nicolas; Depeux, Charlotte; Durand, Sylvine; Debenest, Catherine; Lafitte, Alexandra; Beltran-Bech, Sophie

2017-12-01

Geographic information system (GIS) tools are designed to illustrate, analyse and integrate geographic or spatial data, usually on a macroscopic scale. By contrast, genetic tools focus on a microscopic scale. Because in reality, landscapes have no predefined scale, our original study aims to develop a new approach, combining both cartographic and genetic approaches to explore microscopic landscapes. For this, we focused on Armadillidium vulgare, a terrestrial isopod model in which evolutionary pressures imposed by terrestrial life have led to the development of internal fertilisation and, consequently, to associated physiological changes. Among these, the emergence of internal receptacles, found in many taxa ranging from mammals to arthropods, allowed females to store sperm from several partners, enabling multipaternity. Among arthropods, terrestrial isopods like the polygynandrous A. vulgare present a female structure, the marsupium, in which fertilised eggs migrate and develop into mancae (larval stage). To test our innovative combined approach, we proposed different males to four independent females, and at the end of incubation in the marsupium, we mapped (using GIS methods) and genotyped (using 12 microsatellite markers) all the incubated mancae. This methodology permitted to obtain spatio-genetic maps describing heterozygosity and spatial distribution of mancae and of multipaternity within the marsupial landscape. We discussed the interest of this kind of multidisciplinary approach which could improve in this case our understanding of sexual selection mechanisms in this terrestrial crustacean. Beyond the interesting model-focused insights, the main challenge of this study was the transfer of GIS techniques to a microscopic scale and our results appear so as pioneers rendering GIS tools available for studies involving imagery whatever their study scale.

Procedural Modeling for Rapid-Prototyping of Multiple Building Phases

NASA Astrophysics Data System (ADS)

Saldana, M.; Johanson, C.

2013-02-01

RomeLab is a multidisciplinary working group at UCLA that uses the city of Rome as a laboratory for the exploration of research approaches and dissemination practices centered on the intersection of space and time in antiquity. In this paper we present a multiplatform workflow for the rapid-prototyping of historical cityscapes through the use of geographic information systems, procedural modeling, and interactive game development. Our workflow begins by aggregating archaeological data in a GIS database. Next, 3D building models are generated from the ArcMap shapefiles in Esri CityEngine using procedural modeling techniques. A GIS-based terrain model is also adjusted in CityEngine to fit the building elevations. Finally, the terrain and city models are combined in Unity, a game engine which we used to produce web-based interactive environments which are linked to the GIS data using keyhole markup language (KML). The goal of our workflow is to demonstrate that knowledge generated within a first-person virtual world experience can inform the evaluation of data derived from textual and archaeological sources, and vice versa.

Integrating GIS, cellular automata, and genetic algorithm in urban spatial optimization: a case study of Lanzhou

NASA Astrophysics Data System (ADS)

Xu, Xibao; Zhang, Jianming; Zhou, Xiaojian

2006-10-01

This paper presents a model integrating GIS, cellular automata (CA) and genetic algorithm (GA) in urban spatial optimization. The model involves three objectives of the maximization of land-use efficiency, the maximization of urban spatial harmony and appropriate proportion of each land-use type. CA submodel is designed with standard Moore neighbor and three transition rules to maximize the land-use efficiency and urban spatial harmony, according to the land-use suitability and spatial harmony index. GA submodel is designed with four constraints and seven steps for the maximization of urban spatial harmony and appropriate proportion of each land-use type, including encoding, initializing, calculating fitness, selection, crossover, mutation and elitism. GIS is used to prepare for the input data sets for the model and perform spatial analysis on the results, while CA and GA are integrated to optimize urban spatial structure, programmed with Matlab 7 and coupled with GIS loosely. Lanzhou, a typical valley-basin city with fast urban development, is chosen as the case study. At the end, a detail analysis and evaluation of the spatial optimization with the model are made, and it proves to be a powerful tool in optimizing urban spatial structure and make supplement for urban planning and policy-makers.

Teaching Thousands with Cloud-based GIS

NASA Astrophysics Data System (ADS)

Gould, Michael; DiBiase, David; Beale, Linda

2016-04-01

Teaching Thousands with Cloud-based GIS Educators often draw a distinction between "teaching about GIS" and "teaching with GIS." Teaching about GIS involves helping students learn what GIS is, what it does, and how it works. On the other hand, teaching with GIS involves using the technology as a means to achieve education objectives in the sciences, social sciences, professional disciplines like engineering and planning, and even the humanities. The same distinction applies to CyberGIS. Understandably, early efforts to develop CyberGIS curricula and educational resources tend to be concerned primarily with CyberGIS itself. However, if CyberGIS becomes as functional, usable and scalable as it aspires to be, teaching with CyberGIS has the potential to enable large and diverse global audiences to perform spatial analysis using hosted data, mapping and analysis services all running in the cloud. Early examples of teaching tens of thousands of students across the globe with cloud-based GIS include the massive open online courses (MOOCs) offered by Penn State University and others, as well as the series of MOOCs more recently developed and offered by Esri. In each case, ArcGIS Online was used to help students achieve educational objectives in subjects like business, geodesign, geospatial intelligence, and spatial analysis, as well as mapping. Feedback from the more than 100,000 total student participants to date, as well as from the educators and staff who supported these offerings, suggest that online education with cloud-based GIS is scalable to very large audiences. Lessons learned from the course design, development, and delivery of these early examples may be useful in informing the continuing development of CyberGIS education. While MOOCs may have passed the peak of their "hype cycle" in higher education, the phenomenon they revealed persists: namely, a global mass market of educated young adults who turn to free online education to expand their horizons. The ability of CyberGIS to attract and effectively serve this market may be one measure of its success.

Holistic Approach to Secondary Earth Science Teacher Professional Development: the Triad of Project-based Instruction, Earth Science Content, and GIS Technology

NASA Astrophysics Data System (ADS)

Rubino-Hare, L.; Sample, J. C.; Fredrickson, K.; Claesgens, J.; Bloom, N.; Henderson-Dahms, C.; Manone, M.

2011-12-01

We have provided two years of professional development for secondary and middle school teachers with a focus on project-based instruction (PBI) using GIS. The EYE-POD project (funded by NSF-ITEST) involved pairs of teachers from Arizona and the surrounding region in two-week institutes during Summer, 2010, and an advanced institute in Summer, 2011. The NAz-POD project (funded by Arizona Department of Education and administered by Science Foundation Arizona) provided similar PD experiences, but the institutes occurred during weekends in the academic year. The institutes were led by a team with expertise in Earth science content, professional development and pedagogy, and GIS. The teachers developed learning modules using the project based learning instructional model. Pedagogy, content, and GIS skills were combined throughout the professional development activities. Academic year follow up by NAU personnel included classroom observations and technical support. For assessing student work we provided a rubric, but learned that teachers were not prepared to assess GIS products in order to determine the level of student understanding. In year two of the project we incorporated strategies for assessment of student products into the professional development. Teacher-participants and their students completed several pre- and post- assessments. Teacher assessments included a geospatial performance assessment, classroom observations, and content tests. Student data collection included attitude and efficacy questionnaires, content tests, and authentic assessments including products using GIS. Content tests were the same for teachers and students and included spatial reasoning, data analysis, and Earth science content. Data was also collected on teacher perception of professional development delivery and self-reported confidence in teaching with PBI and geospatial technology. Student assessments show that improvement occurred in all areas on the content test. Possible factors resulting in this improvement will be shared, and placed in the context of other assessment results.

From data to information: Tools and techniques educators can use to enhance Google Earth imagery with geographic information systems data and three dimensional models

NASA Astrophysics Data System (ADS)

Simms, M.

2007-12-01

As with any educational technology, moving beyond basic information delivery to dynamic use can be a challenge and Google Earth (GE) is no exception. Moving beyond annotated placemarks and pictures, educators can utilize free, free-to-educators, and low cost tools to develop learning experiences within GE to facilitate dynamic interaction with real world data in the form of three dimensional models (3D) and geographic information systems data (GIS). Students take an active role in knowledge construction through self-directed navigation in 3D, seeing features of the landscape not in snapshot views found in textbooks, but in situ and in context. By incorporating categorized data, such as what is commonly found in GIS, an added dimension of human interaction can be incorporated. For example, GIS layers such as landuse, soil type, etc. provide students with data tools for investigating the role their community plays in supporting migrating Monarch butterfly habitat. Functionality for changing the appearance of layers in GE facilitates interaction with geospatial data in a manner that creates a type of "visual" GIS and can serve as an advanced organizer for later use of more powerful GIS software. GE can also be used as a metaphor to create a new context for an otherwise abstract concept, for example, scaling 3D models of the sun and planets to the size of a well known football stadium and placing each planet at the corresponding scaled distances from that location. Photorealistic 3D models created using SketchUp and Anim8or may help students relate to an otherwise abstract concept of planetary size and distances. Finally, digital elevation models (DEM) draped with imagery not available in GE or with GIS data can be used to make topic-specific 3D models either used within GE or in a 3D model viewer embedded in a website or email. With a little instruction, students can quickly learn how to make their own models as well. Procedures and software to accomplish each of these examples will be demonstrated.

Visualizing the application of GIS in transformation towards a sustainable development and a low carbon society

NASA Astrophysics Data System (ADS)

Ahmad, M. H.; Ariffin, A.; Malik, T. A.

2014-02-01

A strategy for sustainable development is a significant milestone on the road to a more socially, economically and environmentally responsible society. It creates a framework within which the stakeholders can make a strong contribution to a better future. Because of the merits and growing interest in sustainable development, the race is on for researchers and stakeholders in the construction sector to initiate actions to reduce the negative impacts of development and sharpen their competitive edge. The cities should be created with a vision which supports harmonious communities and living conditions through sustainable urban development. The resources must be used efficiently while reducing the development impact on human health and environment during the buildings' life cycle. Environmental auditing and pressure-state response based models to monitor sustainable development in Malaysia should be developed. A data availability and sharing system should be developed and implemented to facilitate for the use in the establishment of sustainable development and low carbon society. Ideas which affect millions of people and guide the policies of nations must be accessible to all. Only thus can they permeate the institutions from the local to the global level. Creating sustainable development and low carbon societies depends on the knowledge and involvement of all stakeholders in the industry. So what is our level of understanding of GIS and its application? The development of geospatial data in Malaysia is important because the successful implementation of sustainable development and low carbon projects depend largely on the availability of geospatial information. It would facilitate the stakeholders and resolve some of the problems regarding the availability, quality, organisation, accessibility and sharing of spatial information. The introduction of GIS may change the way for better sustainable urban development and low carbon society performance. The use of GIS is to improve decision making to implement development methods, awareness for the need for sustainable development and in development control to provide the information on the distance from the proclaimed objective. Malaysia should not fall in its attitude on sustainable development, green design, sustainable construction and a low carbon society. Literature review on GIS is carried out to understand the philosophy, concept, principles, challenges and advantages of using GIS for sustainable urban development and low carbon societies. This paper would encourage our understanding about the state of geographical information system (GIS) in sustainable development and its application which would further stimulate actions and strategies towards a sustainable built environment.

[Applications of GIS in biomass energy source research].

PubMed

Su, Xian-Ming; Wang, Wu-Kui; Li, Yi-Wei; Sun, Wen-Xiang; Shi, Hai; Zhang, Da-Hong

2010-03-01

Biomass resources have the characteristics of widespread and dispersed distribution, which have close relations to the environment, climate, soil, and land use, etc. Geographic information system (GIS) has the functions of spatial analysis and the flexibility of integrating with other application models and algorithms, being of predominance to the biomass energy source research. This paper summarized the researches on the GIS applications in biomass energy source research, with the focus in the feasibility study of bioenergy development, assessment of biomass resources amount and distribution, layout of biomass exploitation and utilization, evaluation of gaseous emission from biomass burning, and biomass energy information system. Three perspectives of GIS applications in biomass energy source research were proposed, i. e., to enrich the data source, to improve the capacity on data processing and decision-support, and to generate the online proposal.

The social problems and strategies of the government GIS in China

NASA Astrophysics Data System (ADS)

Chen, Nan; Fu, Zhongliang

2007-06-01

GIS has wider and wider applications. The application in the field of administrative management and assistant decision-making have formed a specific research area--the government GIS. As an information industry with great sociality, GIS and its development are influenced by many technical factors and social factors. As for the government GIS in China, the social factors often play a more important role in it. A description of the current development status of the government GIS, both in China and abroad, was made in this paper. After the description, researchers pointed out the deficiency of Chinese government GIS. On the basis of this, the rational suggestion of government GIS in China were put forward at last.

Natural resources evaluation by the use of remote sensing and GIS technology for agricultural development

NASA Astrophysics Data System (ADS)

Pham Viet, C.; Nguyen Phuong, M.

1993-11-01

A multilevel Geographic Information System based on Remote Sensing and GIS-Technology is established to assess erosion susceptibility and select suitable land for soil conservation and regional planning, management. A cross analysis between the thematic maps and field data is done to examine the relationship between natural condition and land suitability for agriculture. The Land resources evaluation models are affective for understanding the cultivation possibility and can be used as a regional project to be applied in various Vietnam regions for agricultural development.

A geographic information system for characterizing exposure to Agent Orange and other herbicides in Vietnam.

PubMed

Stellman, Jeanne Mager; Stellman, Steven D; Weber, Tracy; Tomasallo, Carrie; Stellman, Andrew B; Christian, Richard

2003-03-01

Between 1961 and 1971, U.S. military forces dispersed more than 19 million gallons of phenoxy and other herbicidal agents in the Republic of Vietnam, including more than 12 million gallons of dioxin-contaminated Agent Orange, yet only comparatively limited epidemiologic and environmental research has been carried out on the distribution and health effects of this contamination. As part of a response to a National Academy of Sciences' request for development of exposure methodologies for carrying out epidemiologic research, a conceptual framework for estimating exposure opportunity to herbicides and a geographic information system (GIS) have been developed. The GIS is based on a relational database system that integrates extensive data resources on dispersal of herbicides (e.g., HERBS records of Ranch Hand aircraft flight paths, gallonage, and chemical agent), locations of military units and bases, dynamic movement of combat troops in Vietnam, and locations of civilian population centers. The GIS can provide a variety of proximity counts for exposure to 9,141 herbicide application missions. In addition, the GIS can be used to generate a quantitative exposure opportunity index that accounts for quantity of herbicide sprayed, distance, and environmental decay of a toxic factor such as dioxin, and is flexible enough to permit substitution of other mathematical exposure models by the user. The GIS thus provides a basis for estimation of herbicide exposure for use in large-scale epidemiologic studies. To facilitate widespread use of the GIS, a user-friendly software package was developed to permit researchers to assign exposure opportunity indexes to troops, locations, or individuals.

Habitat features and predictive habitat modeling for the Colorado chipmunk in southern New Mexico

USGS Publications Warehouse

Rivieccio, M.; Thompson, B.C.; Gould, W.R.; Boykin, K.G.

2003-01-01

Two subspecies of Colorado chipmunk (state threatened and federal species of concern) occur in southern New Mexico: Tamias quadrivittatus australis in the Organ Mountains and T. q. oscuraensis in the Oscura Mountains. We developed a GIS model of potentially suitable habitat based on vegetation and elevation features, evaluated site classifications of the GIS model, and determined vegetation and terrain features associated with chipmunk occurrence. We compared GIS model classifications with actual vegetation and elevation features measured at 37 sites. At 60 sites we measured 18 habitat variables regarding slope, aspect, tree species, shrub species, and ground cover. We used logistic regression to analyze habitat variables associated with chipmunk presence/absence. All (100%) 37 sample sites (28 predicted suitable, 9 predicted unsuitable) were classified correctly by the GIS model regarding elevation and vegetation. For 28 sites predicted suitable by the GIS model, 18 sites (64%) appeared visually suitable based on habitat variables selected from logistic regression analyses, of which 10 sites (36%) were specifically predicted as suitable habitat via logistic regression. We detected chipmunks at 70% of sites deemed suitable via the logistic regression models. Shrub cover, tree density, plant proximity, presence of logs, and presence of rock outcrop were retained in the logistic model for the Oscura Mountains; litter, shrub cover, and grass cover were retained in the logistic model for the Organ Mountains. Evaluation of predictive models illustrates the need for multi-stage analyses to best judge performance. Microhabitat analyses indicate prospective needs for different management strategies between the subspecies. Sensitivities of each population of the Colorado chipmunk to natural and prescribed fire suggest that partial burnings of areas inhabited by Colorado chipmunks in southern New Mexico may be beneficial. These partial burnings may later help avoid a fire that could substantially reduce habitat of chipmunks over a mountain range.

Analysis of Giga-size Earth Observation Data in Open Source GRASS GIS 7 - from Desktop to On-line Solutions.

NASA Astrophysics Data System (ADS)

Stepinski, T. F.; Mitasova, H.; Jasiewicz, J.; Neteler, M.; Gebbert, S.

2014-12-01

GRASS GIS is a leading open source GIS for geospatial analysis and modeling. In addition to being utilized as a desktop GIS it also serves as a processing engine for high performance geospatial computing for applications in diverse disciplines. The newly released GRASS GIS 7 supports big data analysis including temporal framework, image segmentation, watershed analysis, synchronized 2D/3D animations and many others. This presentation will focus on new GRASS GIS 7-powered tools for geoprocessing giga-size earth observation (EO) data using spatial pattern analysis. Pattern-based analysis connects to human visual perception of space as well as makes geoprocessing of giga-size EO data possible in an efficient and robust manner. GeoPAT is a collection of GRASS GIS 7 modules that fully integrates procedures for pattern representation of EO data and patterns similarity calculations with standard GIS tasks of mapping, maps overlay, segmentation, classification(Fig 1a), change detections etc. GeoPAT works very well on a desktop but it also underpins several GeoWeb applications (http://sil.uc.edu/ ) which allow users to do analysis on selected EO datasets without the need to download them. The GRASS GIS 7 temporal framework and high resolution visualizations will be illustrated using time series of giga-size, lidar-based digital elevation models representing the dynamics of North Carolina barrier islands over the past 15 years. The temporal framework supports efficient raster and vector data series analysis and simplifies data input for visual analysis of dynamic landscapes (Fig. 1b) allowing users to rapidly identify vulnerable locations, changes in built environment and eroding coastlines. Numerous improvements in GRASS GIS 7 were implemented to support terabyte size data processing for reconstruction of MODIS land surface temperature (LST) at 250m resolution using multiple regressions and PCA (Fig. 1c) . The new MODIS LST series (http://gis.cri.fmach.it/eurolst/) includes 4 maps per day since year 2000, provide improved data for the epidemiological predictions, viticulture, assessment of urban heat islands and numerous other applications. The presentation will conclude with outline of future development for big data interfaces to further enhance the web-based GRASS GIS data analysis.

GIS-based intersection inventory system (GIS-IIS) : integrating GIS, traffic signal data and intersection images

DOT National Transportation Integrated Search

2005-02-25

This study developed a GIS-based Intersection Inventory System (GIS-IIS) for the signalized : intersections on the state-maintained highway system of IDOT District 6. GIS-IIS is a tool to have an : easy access to intersection inventory data, photogra...

Gsflow-py: An integrated hydrologic model development tool

NASA Astrophysics Data System (ADS)

Gardner, M.; Niswonger, R. G.; Morton, C.; Henson, W.; Huntington, J. L.

2017-12-01

Integrated hydrologic modeling encompasses a vast number of processes and specifications, variable in time and space, and development of model datasets can be arduous. Model input construction techniques have not been formalized or made easily reproducible. Creating the input files for integrated hydrologic models (IHM) requires complex GIS processing of raster and vector datasets from various sources. Developing stream network topology that is consistent with the model resolution digital elevation model is important for robust simulation of surface water and groundwater exchanges. Distribution of meteorologic parameters over the model domain is difficult in complex terrain at the model resolution scale, but is necessary to drive realistic simulations. Historically, development of input data for IHM models has required extensive GIS and computer programming expertise which has restricted the use of IHMs to research groups with available financial, human, and technical resources. Here we present a series of Python scripts that provide a formalized technique for the parameterization and development of integrated hydrologic model inputs for GSFLOW. With some modifications, this process could be applied to any regular grid hydrologic model. This Python toolkit automates many of the necessary and laborious processes of parameterization, including stream network development and cascade routing, land coverages, and meteorological distribution over the model domain.

The review of some chosen approaches to foresee the development of urban areas. (Polish Title: Przeglad wybranych podejsc w zakresie prognozowania rozwoju obszarow miast)

NASA Astrophysics Data System (ADS)

Radło-Kulisiewicz, M.

2015-12-01

The practical importance of Geographical Information Systems in urban planning and managing of urban areas is becoming much more explicit. Managing small cities usually needs simple GIS spatial analysis tools to support planners' decisions. Otherwise, the urban dynamic is bigger and factors affecting changes in city are combined. These analyses are not sufficient and then a need for more advanced and sophisticated solutions can appear. The aim of this article is to introduce popular techniques for urban modelling and underlying importance of GIS as an environment for creating simple models, which let t easy decisions in creating vision of a city be taken. The Article touches on the following issues related to the planning and management of urban space; from the applicable standards concerning materials planning in Poland, through the possibilities that give us network solutions useful at the municipal and country level, to existing techniques in modelling cities in the world. The background for these questions are the Geographical Information Systems (their role in this respect), that naturally fit into this theme. The ability to analyze multi-source data at different levels of detail, in different variants and ranges, predispose the GIS to environmental urban management. While also taking into account social - economic factors, integrated with GIS predictive modeling techniques, allows us to understand dependencies that navigate complex urban phenomena. City management in an integrated and thoughtful manner and will reduce the costs associated with the expansion of the urban fabric and avoid the chaos of urban development.

Integrating Online GIS into the K-12 Curricula: Lessons from the Development of a Collaborative GIS in Michigan

ERIC Educational Resources Information Center

Henry, Paul; Semple, Hugh

2012-01-01

GIS has shown promise in Project Based Learning (PBL) environments, but many obstacles exist in its integration into school curriculums. This article discusses the development and utilization of an online GIS tool that was created to illustrate that the perceptual gap between relevance and ease of use of GIS software can be bridged at the K-12…

Road landslide information management and forecasting system base on GIS.

PubMed

Wang, Wei Dong; Du, Xiang Gang; Xie, Cui Ming

2009-09-01

Take account of the characters of road geological hazard and its supervision, it is very important to develop the Road Landslides Information Management and Forecasting System based on Geographic Information System (GIS). The paper presents the system objective, function, component modules and key techniques in the procedure of system development. The system, based on the spatial information and attribute information of road geological hazard, was developed and applied in Guizhou, a province of China where there are numerous and typical landslides. The manager of communication, using the system, can visually inquire all road landslides information based on regional road network or on the monitoring network of individual landslide. Furthermore, the system, integrated with mathematical prediction models and the GIS's strongpoint on spatial analyzing, can assess and predict landslide developing procedure according to the field monitoring data. Thus, it can efficiently assists the road construction or management units in making decision to control the landslides and to reduce human vulnerability.

[Spatio-temporal problems of geographic information system in marine fishery].

PubMed

Su, Fenzhen; Zhou, Chenghu; Du, Yunyan; Zhang, Tianyu; Shao, Quanqin

2003-09-01

In marine fisheries, it is very important to understand and grasp the spatio-temporal nature. Geographical Information System (GIS) has been applied to describe or forecast the dynamic trend of resources or to set up evaluation model, which is one of high technologies in modern marine fisheries. Based on the review of the development of marine fishery GIS (MFGIS), four spatio-temporal problems it occurred were discussed, and the possible resolutions were prospected.

STEMS-Air: a simple GIS-based air pollution dispersion model for city-wide exposure assessment.

PubMed

Gulliver, John; Briggs, David

2011-05-15

Current methods of air pollution modelling do not readily meet the needs of air pollution mapping for short-term (i.e. daily) exposure studies. The main limiting factor is that for those few models that couple with a GIS there are insufficient tools for directly mapping air pollution both at high spatial resolution and over large areas (e.g. city wide). A simple GIS-based air pollution model (STEMS-Air) has been developed for PM(10) to meet these needs with the option to choose different exposure averaging periods (e.g. daily and annual). STEMS-Air uses the grid-based FOCALSUM function in ArcGIS in conjunction with a fine grid of emission sources and basic information on meteorology to implement a simple Gaussian plume model of air pollution dispersion. STEMS-Air was developed and validated in London, UK, using data on concentrations of PM(10) from routinely available monitoring data. Results from the validation study show that STEMS-Air performs well in predicting both daily (at four sites) and annual (at 30 sites) concentrations of PM(10). For daily modelling, STEMS-Air achieved r(2) values in the range 0.19-0.43 (p<0.001) based solely on traffic-related emissions and r(2) values in the range 0.41-0.63 (p<0.001) when adding information on 'background' levels of PM(10). For annual modelling of PM(10), the model returned r(2) in the range 0.67-0.77 (P<0.001) when compared with monitored concentrations. The model can thus be used for rapid production of daily or annual city-wide air pollution maps either as a screening process in urban air quality planning and management, or as the basis for health risk assessment and epidemiological studies. Crown Copyright © 2011. Published by Elsevier B.V. All rights reserved.

Improving Access to Precipitation Data for GIS Users: Designing for Ease of Use

NASA Technical Reports Server (NTRS)

Stocker, Erich F.; Kelley, Owen A.

2007-01-01

The Global Precipitation Measurement Mission (GPM) is a NASA/JAXA led international mission to configure a constellation of space-based radiometers to monitor precipitation over the globe. The GPM goal of making global 3-hour precipitation products available in near real-time will make such global products more useful to a broader community of modelers and Geographic Information Systems (GIS) users than is currently the case with remote sensed precipitation products. Based on the existing interest to make Tropical Rainfall Measuring Mission (TRMM) data available to a growing community of GIS users as well as what will certainly be an expanded community during the GPM era, it is clear that data systems must make a greater effort to provide data in formats easily used by GIS. We describe precipitation GIS products being developed for TRMM data. These products will serve as prototypes for production efforts during the GPM era. We describe efforts to convert TRMM precipitation data to GeoTIFF, Shapefile, and ASCII grid. Clearly, our goal is to format GPM data so that it can be easily used within GIS applications. We desire feedback on these efforts and any additions or direction changes that should be undertaken by the data system.

An integrated GIS-based interval-probabilistic programming model for land-use planning management under uncertainty--a case study at Suzhou, China.

PubMed

Lu, Shasha; Zhou, Min; Guan, Xingliang; Tao, Lizao

2015-03-01

A large number of mathematical models have been developed for supporting optimization of land-use allocation; however, few of them simultaneously consider land suitability (e.g., physical features and spatial information) and various uncertainties existing in many factors (e.g., land availabilities, land demands, land-use patterns, and ecological requirements). This paper incorporates geographic information system (GIS) technology into interval-probabilistic programming (IPP) for land-use planning management (IPP-LUPM). GIS is utilized to assemble data for the aggregated land-use alternatives, and IPP is developed for tackling uncertainties presented as discrete intervals and probability distribution. Based on GIS, the suitability maps of different land users are provided by the outcomes of land suitability assessment and spatial analysis. The maximum area of every type of land use obtained from the suitability maps, as well as various objectives/constraints (i.e., land supply, land demand of socioeconomic development, future development strategies, and environmental capacity), is used as input data for the optimization of land-use areas with IPP-LUPM model. The proposed model not only considers the outcomes of land suitability evaluation (i.e., topography, ground conditions, hydrology, and spatial location) but also involves economic factors, food security, and eco-environmental constraints, which can effectively reflect various interrelations among different aspects in a land-use planning management system. The case study results at Suzhou, China, demonstrate that the model can help to examine the reliability of satisfying (or risk of violating) system constraints under uncertainty. Moreover, it may identify the quantitative relationship between land suitability and system benefits. Willingness to arrange the land areas based on the condition of highly suitable land will not only reduce the potential conflicts on the environmental system but also lead to a lower economic benefit. However, a strong desire to develop lower suitable land areas will bring not only a higher economic benefit but also higher risks of violating environmental and ecological constraints. The land manager should make decisions through trade-offs between economic objectives and environmental/ecological objectives.

Identifying Skill Requirements for GIS Positions: A Content Analysis of Job Advertisements

ERIC Educational Resources Information Center

Hong, Jung Eun

2016-01-01

This study identifies the skill requirements for geographic information system (GIS) positions, including GIS analysts, programmers/developers/engineers, specialists, and technicians, through a content analysis of 946 GIS job advertisements from 2007-2014. The results indicated that GIS job applicants need to possess high levels of GIS analysis…

GEOGRAPHICAL INFORMATION SYSTEM, DECISION SUPPORT SYSTEMS, AND URBAN STORMWATER MANAGEMENT

EPA Science Inventory

The full report reviews the application of Geographic Inforamtion System (GIS) technology to the field of urban stormwater modeling. The GIS literature is reviewed in the context of its use as a spatial database for urban stormwater modeling, integration of GIS and hydroloic time...

GIS based model interfacing : incorporating existing software and new techniques into a streamlined interface package

DOT National Transportation Integrated Search

2000-01-01

The ability to visualize data has grown immensely as the speed and functionality of Geographic Information Systems (GIS) have increased. Now, with modeling software and GIS, planners are able to view a prediction of the future traffic demands in thei...

Application of virtual reality GIS in urban planning: an example in Huangdao district

NASA Astrophysics Data System (ADS)

Han, Yong; Qiao, Xin; Sun, Weichen; Zhang, Litao

2007-06-01

As an important development direction of GIS, Virtual Reality GIS was founded in 1950s. After 1990s, due to the fast development of its theory and the computer technology, Virtual Reality has been applied to many fields: military, aerospace, design, manufactory, information management, business, construction, city management, medical, education, etc.. The most famous project is the Virtual Los Angeles implemented by the Urban Simulation Team (UST) of UCLA. The main focus of the UST is a long-term effort to build a real-time Virtual Reality model of the entire Los Angeles basin for use by architects, urban planners, emergency response teams, and the government entities. When completed, the entire Virtual L.A. model will cover an area well in excess of 10000 square miles and will elegantly scale from satellite images to street level views accurate enough to allow the signs in the window of the shops and the graffiti on the walls to be legible. Till now, the virtual L.A. has been applied to urban environments and design analysis, transportation studies, historic reconstruction and education, etc. Compared to the early development abroad, the development of Virtual Reality GIS in China is relatively late. It is researched in some universities in early years. But recently, it has been attended by the populace and been used in many social fields: urban planning, environmental protection, historic protection and recovery, real estate, tourism, education etc.. The application of Virtual Reality in urban planning of Huangdao District, Qingdao City is introduced in this paper.

International Research Workshop on Integrating GIS and Environmental Modeling: Problems, Prospects, and Research Needs

NASA Technical Reports Server (NTRS)

Parks, Bradley; Meeson, Blanche W. (Technical Monitor)

2001-01-01

The 4th International Conference on Integrating GIS and Environmental Modeling (GIS/EM4) was convened in Banff, Canada, September 2-8, 2000 at The Banff Centre for Conferences. The meeting's purpose, like it's predecessors was to reformulate, each three to four years, the collaborative research agenda for integrating spatio-temporal analysis with environmental simulation modeling.

Ecocity mapping using GIS: introducing a planning method for assessing and improving neighborhood vitality.

PubMed

Smith, Richard; Miller, Kirstin

2013-01-01

Assessing neighborhood vitality is important to understanding how to improve quality of life and health outcomes. The ecocity model recognizes that cities are part of natural systems and favors walkable neighborhoods. This article introduces ecocity mapping, an innovative planning method, to the public health literature on community engagement by describing a pilot project with a new affordable housing development in Oakland, California between 2007 and 2009. Although ecocity mapping began as a paper technology, advances in geographic information systems (GIS) moved it forward. This article describes how Ecocity Builders used GIS to conduct ecocity mapping to (1) assess vitality of neighborhoods and urban centers to prioritize community health intervention pilot sites and (2) create scenario maps for use in community health planning. From fall 2007 to summer 2008, Ecocity Builders assessed neighborhood vitality using walking distance from parks, schools, rapid transit stops, grocery stores, and retail outlets. In 2008, ecocity maps were shared with residents to create a neighborhood health and sustainability plan. In 2009, Ecocity Builders developed scenario maps to show how changes to the built environment would improve air quality by reducing greenhouse gas emissions from vehicles, while increasing access to basic services and natural amenities. Community organizing with GIS was more useful than GIS alone for final site selection. GIS was useful in mapping scenarios after residents shared local neighborhood knowledge and ideas for change. Residents were interested in long-term environmental planning, provided they could meet immediate needs.

Brugga basin's TACD Model Adaptation to current GIS PCRaster 4.1

NASA Astrophysics Data System (ADS)

Lopez Rozo, Nicolas Antonio; Corzo Perez, Gerald Augusto; Santos Granados, Germán Ricardo

2017-04-01

The process-oriented catchment model TACD (Tracer-Aided Catchment model - Distributed) was developed in the Brugga Basin (Dark Forest, Germany) with a modular structure in the Geographic Information System PCRaster Version 2, in order to dynamically model the natural processes of a complex Basin, such as rainfall, air temperature, solar radiation, evapotranspiration and flow routing among others. Further research and application on this model has been done, such as adapting other meso-scaled basins and adding erosion processes in the hydrological model. However, TACD model is computationally intensive. This has made it not efficient on large and well discretized river basins. Aswell, the current version is not compatible with latest PCRaster Version 4.1, which offers new capabilities on 64-bit hardware architecture, hydraulic calculation improvements, in maps creation, some error and bug fixes. The current work studied and adapted TACD model into the latest GIS PCRaster Version 4.1. This was done by editing the original scripts, replacing deprecated functionalities without losing correctness of the TACD model. The correctness of the adapted TACD model was verified by using the original study case of the Brugga Basin and comparing the adapted model results with the original model results by Stefan Roser in 2001. Small differences were found due to the fact that some hydraulic and hydrological routines were optimized since version 2 of GIS PCRaster. Therefore, the hydraulic and hydrological processes are well represented. With this new working model, further research and development on current topics like uncertainty analysis, GCM downscaling techniques and spatio-temporal modelling are encouraged.

The influence of hazard models on GIS-based regional risk assessments and mitigation policies

USGS Publications Warehouse

Bernknopf, R.L.; Rabinovici, S.J.M.; Wood, N.J.; Dinitz, L.B.

2006-01-01

Geographic information systems (GIS) are important tools for understanding and communicating the spatial distribution of risks associated with natural hazards in regional economies. We present a GIS-based decision support system (DSS) for assessing community vulnerability to natural hazards and evaluating potential mitigation policy outcomes. The Land Use Portfolio Modeler (LUPM) integrates earth science and socioeconomic information to predict the economic impacts of loss-reduction strategies. However, the potential use of such systems in decision making may be limited when multiple but conflicting interpretations of the hazard are available. To explore this problem, we conduct a policy comparison using the LUPM to test the sensitivity of three available assessments of earthquake-induced lateral-spread ground failure susceptibility in a coastal California community. We find that the uncertainty regarding the interpretation of the science inputs can influence the development and implementation of natural hazard management policies. Copyright ?? 2006 Inderscience Enterprises Ltd.

Teaching with a GIS using existing grade 7--12 curricula

NASA Astrophysics Data System (ADS)

Brown, Stephen Castlebury

As Geographic Information Systems (GIS) become less expensive and easier to use, the demand for individuals knowledgeable of this technology increases. Associated with this is the current and future necessity of a public who understands the wide range of technical proficiencies needed for accurate GIS mapping. On a nationwide basis, GIS education in K--12 schools is rare. In the few instances where a school teaches students about these technologies, it is usually led by a single teacher and is not taught on a school-wide basis. This situation exists despite some research indicating that a classroom GIS might enhance the learning of students. Two primary barriers to teacher use and acceptance of a classroom GIS have been identified. First, most teachers lack any training in the use of a GIS. Secondly, there is conflict over focusing upon teaching about the use of a GIS or teaching with a GIS. Beginning in August of 1996 and concluding in August of 1998, nine separate GIS education programs were conducted for a variety of youths and adult educator audiences. Observations of participant's interactions with the GIS program ArcView would lead to the development of a demonstration curriculum and GIS application. To overcome institutional and educational barriers to youth GIS education, a curriculum partly adapted from existing materials and partly created from original materials was developed in Hypertext Markup Language (HTML). A corresponding GIS application was developed to teach about a GIS while instructing with a GIS. The curriculum was distributed for use on CD-ROM and called Georom. The hypertext curriculum provided lessons and exercises that addressed National Science Education Standards and was accessed using an Internet web browser. The curriculum included World Wide Web links to Internet sites with more information about specific topics. Modifications were made to ArcView's Graphical User Interface (GUI) that maintained the general appearance of its standard GUI, but increased its functionality for classroom use. It was observed that the availability and premise of the hypertext curriculum and GIS application increased school administrator acceptance of classroom GIS education. However, the curriculum and GIS application is still not a completely acceptable alternative to quality inservice education on GIS for many teachers.

SDMtoolbox 2.0: the next generation Python-based GIS toolkit for landscape genetic, biogeographic and species distribution model analyses.

PubMed

Brown, Jason L; Bennett, Joseph R; French, Connor M

2017-01-01

SDMtoolbox 2.0 is a software package for spatial studies of ecology, evolution, and genetics. The release of SDMtoolbox 2.0 allows researchers to use the most current ArcGIS software and MaxEnt software, and reduces the amount of time that would be spent developing common solutions. The central aim of this software is to automate complicated and repetitive spatial analyses in an intuitive graphical user interface. One core tenant facilitates careful parameterization of species distribution models (SDMs) to maximize each model's discriminatory ability and minimize overfitting. This includes carefully processing of occurrence data, environmental data, and model parameterization. This program directly interfaces with MaxEnt, one of the most powerful and widely used species distribution modeling software programs, although SDMtoolbox 2.0 is not limited to species distribution modeling or restricted to modeling in MaxEnt. Many of the SDM pre- and post-processing tools have 'universal' analogs for use with any modeling software. The current version contains a total of 79 scripts that harness the power of ArcGIS for macroecology, landscape genetics, and evolutionary studies. For example, these tools allow for biodiversity quantification (such as species richness or corrected weighted endemism), generation of least-cost paths and corridors among shared haplotypes, assessment of the significance of spatial randomizations, and enforcement of dispersal limitations of SDMs projected into future climates-to only name a few functions contained in SDMtoolbox 2.0. Lastly, dozens of generalized tools exists for batch processing and conversion of GIS data types or formats, which are broadly useful to any ArcMap user.

The GIS portal based on JSR168 portlet technology and WSRP

NASA Astrophysics Data System (ADS)

Wu, Defu; Chen, Nengcheng; Zhu, Xinyan; Gong, Jianya

2005-10-01

A portal is a powerful Web site that gives users a single point of access to applications and information in a unified interface. A portal lets users view each application or web page in its own window, called a portlet, and a single browser window can contain multiple portlets. The portlet based on JSP168&WSRP is a new technology for interactive, user-facing web services that plug and play with portals. Thanks to the development of Portal&Web GIS, the GIS Poratl is focused on more and more by the researcheres. This paper studies the GIS Portal defined by ESRI and analyzes the development's status, compares with the commercial Portal and points out the great shortage of the ESRI GIS Portal: lack in Personal content and UI. Therefor this paper goes into depth on the discussion of design and implementation scheme of real GIS Portal, and proposes the new idea of developing customized, plug and play GIS Portal Module based on JSP168 Portlet technology and WSRP standard. This way can resolve the difficult problem of the GIS Portal on lacking of content and customization function. According to this idea, this paper plans to use the JaveBeans provided by GeoSurf to develop visual portlet which have basic operating fuction of GIS. Finally deploys the GIS Portal uing the WebLogic Portal.

Evaluation of the 3d Urban Modelling Capabilities in Geographical Information Systems

NASA Astrophysics Data System (ADS)

Dogru, A. O.; Seker, D. Z.

2010-12-01

Geographical Information System (GIS) Technology, which provides successful solutions to basic spatial problems, is currently widely used in 3 dimensional (3D) modeling of physical reality with its developing visualization tools. The modeling of large and complicated phenomenon is a challenging problem in terms of computer graphics currently in use. However, it is possible to visualize that phenomenon in 3D by using computer systems. 3D models are used in developing computer games, military training, urban planning, tourism and etc. The use of 3D models for planning and management of urban areas is very popular issue of city administrations. In this context, 3D City models are produced and used for various purposes. However the requirements of the models vary depending on the type and scope of the application. While a high level visualization, where photorealistic visualization techniques are widely used, is required for touristy and recreational purposes, an abstract visualization of the physical reality is generally sufficient for the communication of the thematic information. The visual variables, which are the principle components of cartographic visualization, such as: color, shape, pattern, orientation, size, position, and saturation are used for communicating the thematic information. These kinds of 3D city models are called as abstract models. Standardization of technologies used for 3D modeling is now available by the use of CityGML. CityGML implements several novel concepts to support interoperability, consistency and functionality. For example it supports different Levels-of-Detail (LoD), which may arise from independent data collection processes and are used for efficient visualization and efficient data analysis. In one CityGML data set, the same object may be represented in different LoD simultaneously, enabling the analysis and visualization of the same object with regard to different degrees of resolution. Furthermore, two CityGML data sets containing the same object in different LoD may be combined and integrated. In this study GIS tools used for 3D modeling issues were examined. In this context, the availability of the GIS tools for obtaining different LoDs of CityGML standard. Additionally a 3D GIS application that covers a small part of the city of Istanbul was implemented for communicating the thematic information rather than photorealistic visualization by using 3D model. An abstract model was created by using a commercial GIS software modeling tools and the results of the implementation were also presented in the study.

Design and test of an object-oriented GIS to map plant species in the Southern Rockies

NASA Technical Reports Server (NTRS)

Morain, Stanley A.; Neville, Paul R. H.; Budge, Thomas K.; Morrison, Susan C.; Helfrich, Donald A.; Fruit, Sarah

1993-01-01

Elevational and latitudinal shifts occur in the flora of the Rocky Mountains due to long term climate change. In order to specify which species are successfully migrating with these changes, and which are not, an object-oriented, image-based geographic information system (GIS) is being created to animate evolving ecological regimes of temperature and precipitation. Research at the Earth Data Analysis Center (EDAC) is developing a landscape model that includes the spatial, spectral and temporal domains. It is designed to visualize migratory changes in the Rocky Mountain flora, and to specify future community compositions. The object-oriented database will eventually tag each of the nearly 6000 species with a unique hue, intensity, and saturation value, so their movements can be individually traced. An associated GIS includes environmental parameters that control the distribution of each species in the landscape, and satellite imagery is used to help visualize the terrain. Polygons for the GIS are delineated as landform facets that are static in ecological time. The model manages these facets as a triangular irregular net (TIN), and their analysis assesses the gradual progression of species as they migrate through the TIN. Using an appropriate climate change model, the goal will be to stop the modeling process to assess both the rate and direction of species' change and to specify the changing community composition of each landscape facet.

Gis-Based Wind Farm Site Selection Model Offshore Abu Dhabi Emirate, Uae

NASA Astrophysics Data System (ADS)

Saleous, N.; Issa, S.; Mazrouei, J. Al

2016-06-01

The United Arab Emirates (UAE) government has declared the increased use of alternative energy a strategic goal and has invested in identifying and developing various sources of such energy. This study aimed at assessing the viability of establishing wind farms offshore the Emirate of Abu Dhabi, UAE and to identify favourable sites for such farms using Geographic Information Systems (GIS) procedures and algorithms. Based on previous studies and on local requirements, a set of suitability criteria was developed including ocean currents, reserved areas, seabed topography, and wind speed. GIS layers were created and a weighted overlay GIS model based on the above mentioned criteria was built to identify suitable sites for hosting a new offshore wind energy farm. Results showed that most of Abu Dhabi offshore areas were unsuitable, largely due to the presence of restricted zones (marine protected areas, oil extraction platforms and oil pipelines in particular). However, some suitable sites could be identified, especially around Delma Island and North of Jabal Barakah in the Western Region. The environmental impact of potential wind farm locations and associated cables on the marine ecology was examined to ensure minimal disturbance to marine life. Further research is needed to specify wind mills characteristics that suit the study area especially with the presence of heavy traffic due to many oil production and shipping activities in the Arabian Gulf most of the year.

Investigating Surface Bias Errors in the Weather Research and Forecasting (WRF) Model using a Geographic Information System (GIS)

DTIC Science & Technology

2015-02-01

WRF ) Model using a Geographic Information System (GIS) by Jeffrey A Smith, Theresa A Foley, John W Raby, and Brian Reen...ARL-TR-7212 ● FEB 2015 US Army Research Laboratory Investigating Surface Bias Errors in the Weather Research and Forecasting ( WRF ) Model...SUBTITLE Investigating surface bias errors in the Weather Research and Forecasting ( WRF ) Model using a Geographic Information System (GIS) 5a

The Development of GIS Educational Resources Sharing among Central Taiwan Universities

NASA Astrophysics Data System (ADS)

Chou, T.-Y.; Yeh, M.-L.; Lai, Y.-C.

2011-09-01

Using GIS in the classroom enhance students' computer skills and explore the range of knowledge. The paper highlights GIS integration on e-learning platform and introduces a variety of abundant educational resources. This research project will demonstrate tools for e-learning environment and delivers some case studies for learning interaction from Central Taiwan Universities. Feng Chia University (FCU) obtained a remarkable academic project subsidized by Ministry of Education and developed e-learning platform for excellence in teaching/learning programs among Central Taiwan's universities. The aim of the project is to integrate the educational resources of 13 universities in central Taiwan. FCU is serving as the hub of Center University. To overcome the problem of distance, e-platforms have been established to create experiences with collaboration enhanced learning. The e-platforms provide coordination of web service access among the educational community and deliver GIS educational resources. Most of GIS related courses cover the development of GIS, principles of cartography, spatial data analysis and overlaying, terrain analysis, buffer analysis, 3D GIS application, Remote Sensing, GPS technology, and WebGIS, MobileGIS, ArcGIS manipulation. In each GIS case study, students have been taught to know geographic meaning, collect spatial data and then use ArcGIS software to analyze spatial data. On one of e-Learning platforms provide lesson plans and presentation slides. Students can learn Arc GIS online. As they analyze spatial data, they can connect to GIS hub to get data they need including satellite images, aerial photos, and vector data. Moreover, e-learning platforms provide solutions and resources. Different levels of image scales have been integrated into the systems. Multi-scale spatial development and analyses in Central Taiwan integrate academic research resources among CTTLRC partners. Thus, establish decision-making support mechanism in teaching and learning. Accelerate communication, cooperation and sharing among academic units

Integration of Jeddah Historical BIM and 3D GIS for Documentation and Restoration of Historical Monument

NASA Astrophysics Data System (ADS)

Baik, A.; Yaagoubi, R.; Boehm, J.

2015-08-01

This work outlines a new approach for the integration of 3D Building Information Modelling and the 3D Geographic Information System (GIS) to provide semantically rich models, and to get the benefits from both systems to help document and analyse cultural heritage sites. Our proposed framework is based on the Jeddah Historical Building Information Modelling process (JHBIM). This JHBIM consists of a Hijazi Architectural Objects Library (HAOL) that supports higher level of details (LoD) while decreasing the time of modelling. The Hijazi Architectural Objects Library has been modelled based on the Islamic historical manuscripts and Hijazi architectural pattern books. Moreover, the HAOL is implemented using BIM software called Autodesk Revit. However, it is known that this BIM environment still has some limitations with the non-standard architectural objects. Hence, we propose to integrate the developed 3D JHBIM with 3D GIS for more advanced analysis. To do so, the JHBIM database is exported and semantically enriched with non-architectural information that is necessary for restoration and preservation of historical monuments. After that, this database is integrated with the 3D Model in the 3D GIS solution. At the end of this paper, we'll illustrate our proposed framework by applying it to a Historical Building called Nasif Historical House in Jeddah. First of all, this building is scanned by the use of a Terrestrial Laser Scanner (TLS) and Close Range Photogrammetry. Then, the 3D JHBIM based on the HOAL is designed on Revit Platform. Finally, this model is integrated to a 3D GIS solution through Autodesk InfraWorks. The shown analysis presented in this research highlights the importance of such integration especially for operational decisions and sharing the historical knowledge about Jeddah Historical City. Furthermore, one of the historical buildings in Old Jeddah, Nasif Historical House, was chosen as a test case for the project.

Utilizing mobile technology in GIS education: A case study of using iPad and iBooks in fieldwork and location based exercises

NASA Astrophysics Data System (ADS)

Chuang, Yi-Ting

The advancement of mobile computing technology has provided diverse way for education. Combination of mobile devices and GIS tools has become a trend in many geospatial technology applications (i.e., Google Maps application on smartphones). This research aims to develop an iBook prototype (a GIS textbook) for GIS education on Apple iPads and to evaluate the effectiveness of adopting the GIS iBook in classes and fieldwork exercises. We conducted the evaluation tests in two GIS courses (GEOG104 and GEOG381) in Fall 2014 at San Diego State University. There are two main research questions in this study: (1) How to assess and evaluate the effectiveness of location-based learning exercises (from iBook) and fieldwork exercises for first-time GIS students? (2) What were major technical challenges and opportunities to utilize mobile device and mobile technology in GIS education? The procedures of developing and evaluating the prototype of the GIS iBook include creating two new chapters (chapter three: Wander the World through Remote Sensing Data and chapter four: Internet and Mobile GIS), interviewing five educators from high schools and community colleges, and improving the contents of the GIS iBook after the interview. There were 31 students who tested the GIS iBook and did a fieldwork exercise with iPads. The 31 students were required to finish five questionnaires after the exercise to express their user experiences and thoughts about the GIS iBook. Based on the result of questionnaires, most students preferred to take GIS classes with the free GIS iBook and thought fieldwork exercise can help their learning. The students also performed better in knowledge oriented survey after reading the GIS iBook. This research also adopts the SWOT analysis method to evaluate the prototype of the GIS iBook. The result of the SWOT analysis indicates that utilizing mobile device in GIS education does have a great potential value in enhancing student's understanding. The strengths of utilizing mobile device in GIS education include portability, easy update contents and abundant free development resources, while the weaknesses include distracting multimedia widgets, lack of Internet access, and security issues. The opportunities of SWOT analysis include financial plan for iPads and lack of competitors, while the threats include higher price and incompatibility of iBooks on other tablet computers. The major limitations and key challenges are limited survey time, small sample size, and technical difficulties of developing the GIS iBook.

Application of spatial technology in malaria research & control: some new insights.

PubMed

Saxena, Rekha; Nagpal, B N; Srivastava, Aruna; Gupta, S K; Dash, A P

2009-08-01

Geographical information System (GIS) has emerged as the core of the spatial technology which integrates wide range of dataset available from different sources including Remote Sensing (RS) and Global Positioning System (GPS). Literature published during the decade (1998-2007) has been compiled and grouped into six categories according to the usage of the technology in malaria epidemiology. Different GIS modules like spatial data sources, mapping and geo-processing tools, distance calculation, digital elevation model (DEM), buffer zone and geo-statistical analysis have been investigated in detail, illustrated with examples as per the derived results. These GIS tools have contributed immensely in understanding the epidemiological processes of malaria and examples drawn have shown that GIS is now widely used for research and decision making in malaria control. Statistical data analysis currently is the most consistent and established set of tools to analyze spatial datasets. The desired future development of GIS is in line with the utilization of geo-statistical tools which combined with high quality data has capability to provide new insight into malaria epidemiology and the complexity of its transmission potential in endemic areas.

Water environmental management with the aid of remote sensing and GIS technology

NASA Astrophysics Data System (ADS)

Chen, Xiaoling; Yuan, Zhongzhi; Li, Yok-Sheung; Song, Hong; Hou, Yingzi; Xu, Zhanhua; Liu, Honghua; Wai, Onyx W.

2005-01-01

Water environment is associated with many disciplinary fields including sciences and management which makes it difficult to study. Timely observation, data getting and analysis on water environment are very important for decision makers who play an important role to maintain the sustainable development. This study focused on developing a plateform of water environment management based on remote sensing and GIS technology, and its main target is to provide with necessary information on water environment through spatial analysis and visual display in a suitable way. The work especially focused on three points, and the first one is related to technical issues of spatial data organization and communication with a combination of GIS and statistical software. A data-related model was proposed to solve the data communication between the mentioned systems. The second one is spatio-temporal analysis based on remote sensing and GIS. Water quality parameters of suspended sediment concentration and BOD5 were specially analyzed in this case, and the results suggested an obvious influence of land source pollution quantitatively in a spatial domain. The third one is 3D visualization of surface feature based on RS and GIS technology. The Pearl River estuary and HongKong's coastal waters in the South China Sea were taken as a case in this study. The software ARCGIS was taken as a basic platform to develop a water environmental management system. The sampling data of water quality in 76 monitoring stations of coastal water bodies and remote sensed images were selected in this study.

Development of a distributed air pollutant dry deposition modeling framework

Treesearch

Satoshi Hirabayashi; Charles N. Kroll; David J. Nowak

2012-01-01

A distributed air pollutant dry deposition modeling systemwas developed with a geographic information system (GIS) to enhance the functionality of i-Tree Eco (i-Tree, 2011). With the developed system, temperature, leaf area index (LAI) and air pollutant concentration in a spatially distributed form can be estimated, and based on these and other input variables, dry...

Nebhydro: Sharing Geospatial Data to Supportwater Management in Nebraska

NASA Astrophysics Data System (ADS)

Kamble, B.; Irmak, A.; Hubbard, K.; Deogun, J.; Dvorak, B.

2012-12-01

Recent advances in web-enabled geographical technologies have the potential to make a dramatic impact on development of highly interactive spatial applications on the web for visualization of large-scale geospatial data by water resources and irrigation scientists. Spatial and point scale water resources data visualization are an emerging and challenging application domain. Query based visual explorations of geospatial hydrological data can play an important role in stimulating scientific hypotheses and seeking causal relationships among hydro variables. The Nebraska Hydrological Information System (NebHydro) utilizes ESRI's ArcGIS server technology to increase technological awareness among farmers, irrigation managers and policy makers. Web-based geospatial applications are an effective way to expose scientific hydrological datasets to the research community and the public. NebHydro uses Adobe Flex technology to offer an online visualization and data analysis system for presentation of social and economic data. Internet mapping services is an integrated product of GIS and Internet technologies; it is a favored solution to achieve the interoperability of GIS. The development of Internet based GIS services in the state of Nebraska showcases the benefits of sharing geospatial hydrological data among agencies, resource managers and policy makers. Geospatial hydrological Information (Evapotranspiration from Remote Sensing, vegetation indices (NDVI), USGS Stream gauge data, Climatic data etc.) is generally generated through model simulation (METRIC, SWAP, Linux, Python based scripting etc). Information is compiled into and stored within object oriented relational spatial databases using a geodatabase information model that supports the key data types needed by applications including features, relationships, networks, imagery, terrains, maps and layers. The system provides online access, querying, visualization, and analysis of the hydrological data from several sources at one place. The study indicates that internet GIS, developed using advanced technologies, provides valuable education potential to users in hydrology and irrigation engineering and suggests that such a system can support advanced hydrological data access and analysis tools to improve utility of data in operations. Keywords: Hydrological Information System, NebHydro, Water Management, data sharing, data visualization, ArcGIS server.

Contribution of Geographic Information Systems and location models to planning of wastewater systems.

PubMed

Leitão, J P; Matos, J S; Gonçalves, A B; Matos, J L

2005-01-01

This paper presents the contributions of Geographic Information Systems (GIS) and location models towards planning regional wastewater systems (sewers and wastewater treatment plants) serving small agglomerations, i.e. agglomerations with less than 2,000 inhabitants. The main goal was to develop a decision support tool for tracing and locating regional wastewater systems. The main results of the model are expressed in terms of number, capacity and location of Wastewater Treatment Plants (WWTP) and the length of main sewers. The decision process concerning the location and capacity of wastewater systems has a number of parameters that can be optimized. These parameters include the total sewer length and number, capacity and location of WWTP. The optimization of parameters should lead to the minimization of construction and operation costs of the integrated system. Location models have been considered as tools for decision support, mainly when a geo-referenced database can be used. In these cases, the GIS may represent an important role for the analysis of data and results especially in the preliminary stage of planning and design. After selecting the spatial location model and the heuristics, two greedy algorithms were implemented in Visual Basic for Applications on the ArcGIS software environment. To illustrate the application of these algorithms a case study was developed, in a rural area located in the central part of Portugal.

Free and simple GIS as appropriate for health mapping in a low resource setting: a case study in eastern Indonesia.

PubMed

Fisher, Rohan P; Myers, Bronwyn A

2011-02-25

Despite the demonstrated utility of GIS for health applications, there are perceived problems in low resource settings: GIS software can be expensive and complex; input data are often of low quality. This study aimed to test the appropriateness of new, inexpensive and simple GIS tools in poorly resourced areas of a developing country. GIS applications were trialled in pilot studies based on mapping of health resources and health indicators at the clinic and district level in the predominantly rural province of Nusa Tenggara Timur in eastern Indonesia. The pilot applications were (i) rapid field collection of health infrastructure data using a GPS enabled PDA, (ii) mapping health indicator data using open source GIS software, and (iii) service availability mapping using a free modelling tool. Through contextualised training, district and clinic staff acquired skills in spatial analysis and visualisation and, six months after the pilot studies, they were using these skills for advocacy in the planning process, to inform the allocation of some health resources, and to evaluate some public health initiatives. We demonstrated that GIS can be a useful and inexpensive tool for the decentralisation of health data analysis to low resource settings through the use of free and simple software, locally relevant training materials and by providing data collection tools to ensure data reliability.

Free and simple GIS as appropriate for health mapping in a low resource setting: a case study in eastern Indonesia

PubMed Central

2011-01-01

Background Despite the demonstrated utility of GIS for health applications, there are perceived problems in low resource settings: GIS software can be expensive and complex; input data are often of low quality. This study aimed to test the appropriateness of new, inexpensive and simple GIS tools in poorly resourced areas of a developing country. GIS applications were trialled in pilot studies based on mapping of health resources and health indicators at the clinic and district level in the predominantly rural province of Nusa Tenggara Timur in eastern Indonesia. The pilot applications were (i) rapid field collection of health infrastructure data using a GPS enabled PDA, (ii) mapping health indicator data using open source GIS software, and (iii) service availability mapping using a free modelling tool. Results Through contextualised training, district and clinic staff acquired skills in spatial analysis and visualisation and, six months after the pilot studies, they were using these skills for advocacy in the planning process, to inform the allocation of some health resources, and to evaluate some public health initiatives. Conclusions We demonstrated that GIS can be a useful and inexpensive tool for the decentralisation of health data analysis to low resource settings through the use of free and simple software, locally relevant training materials and by providing data collection tools to ensure data reliability. PMID:21352553

An overview of ecological monitoring based on geographic information system (GIS) and remote sensing (RS) technology in China

NASA Astrophysics Data System (ADS)

Zhang, Jing; Zhang, Jia; Du, Xiangyang; Kang, Hou; Qiao, Minjuan

2017-11-01

Due to the rapid development of human economy and society, the resulting ecological problems are becoming more and more prominent, and the dynamic monitoring of the various elements in the ecosystem has become the focus of the current research. For the complex structure and function of the ecological environment monitoring, advanced technical means should be adopted. With the development of spatial information technology, the ecological monitoring technology based on GIS and RS is becoming more and more perfect, and spatial analysis will play an important role in the field of environmental protection. Based on the GIS and RS technology, this paper analyzes the general centralized ecological monitoring model, and makes an objective analysis of the current ecological monitoring trend of China. These are important for the protection and management of ecological environment in China.

An explicit GIS-based river basin framework for aquatic ecosystem conservation in the Amazon

NASA Astrophysics Data System (ADS)

Venticinque, Eduardo; Forsberg, Bruce; Barthem, Ronaldo; Petry, Paulo; Hess, Laura; Mercado, Armando; Cañas, Carlos; Montoya, Mariana; Durigan, Carlos; Goulding, Michael

2016-11-01

Despite large-scale infrastructure development, deforestation, mining and petroleum exploration in the Amazon Basin, relatively little attention has been paid to the management scale required for the protection of wetlands, fisheries and other aspects of aquatic ecosystems. This is due, in part, to the enormous size, multinational composition and interconnected nature of the Amazon River system, as well as to the absence of an adequate spatial model for integrating data across the entire Amazon Basin. In this data article we present a spatially uniform multi-scale GIS framework that was developed especially for the analysis, management and monitoring of various aspects of aquatic systems in the Amazon Basin. The Amazon GIS-Based River Basin Framework is accessible as an ESRI geodatabase at doi:10.5063/F1BG2KX8.

Standards for Environmental Measurement Using GIS: Toward a Protocol for Protocols.

PubMed

Forsyth, Ann; Schmitz, Kathryn H; Oakes, Michael; Zimmerman, Jason; Koepp, Joel

2006-02-01

Interdisciplinary research regarding how the built environment influences physical activity has recently increased. Many research projects conducted jointly by public health and environmental design professionals are using geographic information systems (GIS) to objectively measure the built environment. Numerous methodological issues remain, however, and environmental measurements have not been well documented with accepted, common definitions of valid, reliable variables. This paper proposes how to create and document standardized definitions for measures of environmental variables using GIS with the ultimate goal of developing reliable, valid measures. Inherent problems with software and data that hamper environmental measurement can be offset by protocols combining clear conceptual bases with detailed measurement instructions. Examples demonstrate how protocols can more clearly translate concepts into specific measurement. This paper provides a model for developing protocols to allow high quality comparative research on relationships between the environment and physical activity and other outcomes of public health interest.

Application and Validation of a GIS Model for Local Tsunami Vulnerability and Mortality Risk Analysis

NASA Astrophysics Data System (ADS)

Harbitz, C. B.; Frauenfelder, R.; Kaiser, G.; Glimsdal, S.; Sverdrup-thygeson, K.; Løvholt, F.; Gruenburg, L.; Mc Adoo, B. G.

2015-12-01

The 2011 Tōhoku tsunami caused a high number of fatalities and massive destruction. Data collected after the event allow for retrospective analyses. Since 2009, NGI has developed a generic GIS model for local analyses of tsunami vulnerability and mortality risk. The mortality risk convolves the hazard, exposure, and vulnerability. The hazard is represented by the maximum tsunami flow depth (with a corresponding likelihood), the exposure is described by the population density in time and space, while the vulnerability is expressed by the probability of being killed as a function of flow depth and building class. The analysis is further based on high-resolution DEMs. Normally a certain tsunami scenario with a corresponding return period is applied for vulnerability and mortality risk analysis. Hence, the model was first employed for a tsunami forecast scenario affecting Bridgetown, Barbados, and further developed in a forecast study for the city of Batangas in the Philippines. Subsequently, the model was tested by hindcasting the 2009 South Pacific tsunami in American Samoa. This hindcast was based on post-tsunami information. The GIS model was adapted for optimal use of the available data and successfully estimated the degree of mortality.For further validation and development, the model was recently applied in the RAPSODI project for hindcasting the 2011 Tōhoku tsunami in Sendai and Ishinomaki. With reasonable choices of building vulnerability, the estimated expected number of fatalities agree well with the reported death toll. The results of the mortality hindcast for the 2011 Tōhoku tsunami substantiate that the GIS model can help to identify high tsunami mortality risk areas, as well as identify the main risk drivers.The research leading to these results has received funding from CONCERT-Japan Joint Call on Efficient Energy Storage and Distribution/Resilience against Disasters (http://www.concertjapan.eu; project RAPSODI - Risk Assessment and design of Prevention Structures fOr enhanced tsunami DIsaster resilience http://www.ngi.no/en/Project-pages/RAPSODI/), and from the European Union's Seventh Framework Programme (FP7/2007-2013) under grant agreement n° 603839 (Project ASTARTE - Assessment, STrategy And Risk reduction for Tsunamis in Europe http://www.astarte-project.eu/).

a Real-Time GIS Platform for High Sour Gas Leakage Simulation, Evaluation and Visualization

NASA Astrophysics Data System (ADS)

Li, M.; Liu, H.; Yang, C.

2015-07-01

The development of high-sulfur gas fields, also known as sour gas field, is faced with a series of safety control and emergency management problems. The GIS-based emergency response system is placed high expectations under the consideration of high pressure, high content, complex terrain and highly density population in Sichuan Basin, southwest China. The most researches on high hydrogen sulphide gas dispersion simulation and evaluation are used for environmental impact assessment (EIA) or emergency preparedness planning. This paper introduces a real-time GIS platform for high-sulfur gas emergency response. Combining with real-time data from the leak detection systems and the meteorological monitoring stations, GIS platform provides the functions of simulating, evaluating and displaying of the different spatial-temporal toxic gas distribution patterns and evaluation results. This paper firstly proposes the architecture of Emergency Response/Management System, secondly explains EPA's Gaussian dispersion model CALPUFF simulation workflow under high complex terrain and real-time data, thirdly explains the emergency workflow and spatial analysis functions of computing the accident influencing areas, population and the optimal evacuation routes. Finally, a well blow scenarios is used for verify the system. The study shows that GIS platform which integrates the real-time data and CALPUFF models will be one of the essential operational platforms for high-sulfur gas fields emergency management.

Spatial analysis of rural land development

Treesearch

Seong-Hoon Cho; David H. Newman

2005-01-01

This article examines patterns of rural land development and density using spatial econometric models with the application of Geographical Information System (GIS). The cluster patterns of both development and high-density development indicate that the spatially continuous expansions of development and high-density development exist in relatively remote rural areas....

A Time-Sensitive Framework for Including Geographic Information Systems (GIS) in Professional Development Activities for Classroom Teachers

ERIC Educational Resources Information Center

Millsaps, Lisa Tabor; Harrington, John A., Jr.

2017-01-01

This work shares a time-sensitive framework for teaching GIS to educators of all levels and disciplines. Existing relationships with teachers enabled the addition of GIS content in professional development activities. The amount of time devoted to GIS-related content varied depending on time made available for interaction with the audience.…

An Observation Analysis Tool for time-series analysis and sensor management in the FREEWAT GIS environment for water resources management

NASA Astrophysics Data System (ADS)

Cannata, Massimiliano; Neumann, Jakob; Cardoso, Mirko; Rossetto, Rudy; Foglia, Laura; Borsi, Iacopo

2017-04-01

In situ time-series are an important aspect of environmental modelling, especially with the advancement of numerical simulation techniques and increased model complexity. In order to make use of the increasing data available through the requirements of the EU Water Framework Directive, the FREEWAT GIS environment incorporates the newly developed Observation Analysis Tool for time-series analysis. The tool is used to import time-series data into QGIS from local CSV files, online sensors using the istSOS service, or MODFLOW model result files and enables visualisation, pre-processing of data for model development, and post-processing of model results. OAT can be used as a pre-processor for calibration observations, integrating the creation of observations for calibration directly from sensor time-series. The tool consists in an expandable Python library of processing methods and an interface integrated in the QGIS FREEWAT plug-in which includes a large number of modelling capabilities, data management tools and calibration capacity.

Development of management information system for land in mine area based on MapInfo

NASA Astrophysics Data System (ADS)

Wang, Shi-Dong; Liu, Chuang-Hua; Wang, Xin-Chuang; Pan, Yan-Yu

2008-10-01

MapInfo is current a popular GIS software. This paper introduces characters of MapInfo and GIS second development methods offered by MapInfo, which include three ones based on MapBasic, OLE automation, and MapX control usage respectively. Taking development of land management information system in mine area for example, in the paper, the method of developing GIS applications based on MapX has been discussed, as well as development of land management information system in mine area has been introduced in detail, including development environment, overall design, design and realization of every function module, and simple application of system, etc. The system uses MapX 5.0 and Visual Basic 6.0 as development platform, takes SQL Server 2005 as back-end database, and adopts Matlab 6.5 to calculate number in back-end. On the basis of integrated design, the system develops eight modules including start-up, layer control, spatial query, spatial analysis, data editing, application model, document management, results output. The system can be used in mine area for cadastral management, land use structure optimization, land reclamation, land evaluation, analysis and forecasting for land in mine area and environmental disruption, thematic mapping, and so on.

A simulation method for the stability analysis of landscape scenarios by using a NetLogo application in GIS environment

NASA Astrophysics Data System (ADS)

Gobattoni, Federica; Lauro, Giuliana; Leone, Antonio; Monaco, Roberto; Pelorosso, Raffaele

2010-05-01

Landscape continually evolves under the influence of a complex and broad range of natural processes, directly or indirectly determined by land use, but also under the impact of anthropic actions of planning and territorial management. While processes such as earthquakes, landslides, and so on, are manifestations of this evolutionary process, human decisions concerning land government (cropping, urbanization etc.) may affect dramatically the landscape evolution in a complex mechanism of cause-and-effect leading to accelerated erosion phenomena, hydro-geological instability and flood events. To better understand landscape evolution and change in time, several numerical and empirical models have been developed and implemented with the aim to explore and explain such complex processes; reproducing landscape evolution through models and schematic representation of reality could be a powerful and reliable tool for natural resources planning and decision making in land management. Even understanding interactions and relations between the involved variables, predicting how the system will react to external inputs such as political, social or economic constraints, could be strongly difficult. Decision support systems could help in choosing among possible alternatives by integrating different sources of information and "What if" scenarios could be developed as possible future states of the world that represent alternative plausible conditions under different assumptions (Mahmoud M. wt al., 2009). Modelling approaches can be successfully applied to describe and assess both the natural spatial environmental variability and the anthropic impacts at different temporal and spatial scales even if they usually takes into account each aspect of the environmental system separately and without looking directly at landscape as a unique system and without understanding its intrinsic evolution mechanisms (H. Siegrist, 2002, S. Demberel, 2003, A. Brenner, 2005). GIS-based models which could be able to predict the response of the landscape working as a unique system, are expected to advance through a development of sustainable planning strategies and to evaluate the equilibrium-non equilibrium status of landscape evolution and the availability of vital resources in space and time. In this context mathematical models adapted in GIS environment may really give an heavy contribution in such a complex problem- solving, providing a real and concrete Decision System Support. An integrated GIS (Geographic Information System)-based approach was developed (G. Lauro, R. Monaco, 2008) combining an ecological graph model for the analysis of the relationship between spatial pattern and ecological flows and a mathematical model, based on a system of two nonlinear differential equations, that studies meta-stability and bifurcation phenomena. These equations are mainly based on a balance law between a logistic growth of bio-energy and its reduction due to limiting factors coming from environmental constraints. The energy exchange among them will be more or less strong depending on the degree of permeability of the barriers which can obstruct the energy passage from each "landscape unit" to the other. Through NetLogo, a cross-platform multi-agent programmable modelling environment, a completely automatic GIS-based mathematical model, based on the ecological graph and on the cited two differential equations, is presented and discussed here. A study case in Central Italy is analysed to better underline the importance of such a user friendly model in GIS environment.

Holocene thinning of the Greenland ice sheet.

PubMed

Vinther, B M; Buchardt, S L; Clausen, H B; Dahl-Jensen, D; Johnsen, S J; Fisher, D A; Koerner, R M; Raynaud, D; Lipenkov, V; Andersen, K K; Blunier, T; Rasmussen, S O; Steffensen, J P; Svensson, A M

2009-09-17

On entering an era of global warming, the stability of the Greenland ice sheet (GIS) is an important concern, especially in the light of new evidence of rapidly changing flow and melt conditions at the GIS margins. Studying the response of the GIS to past climatic change may help to advance our understanding of GIS dynamics. The previous interpretation of evidence from stable isotopes (delta(18)O) in water from GIS ice cores was that Holocene climate variability on the GIS differed spatially and that a consistent Holocene climate optimum-the unusually warm period from about 9,000 to 6,000 years ago found in many northern-latitude palaeoclimate records-did not exist. Here we extract both the Greenland Holocene temperature history and the evolution of GIS surface elevation at four GIS locations. We achieve this by comparing delta(18)O from GIS ice cores with delta(18)O from ice cores from small marginal icecaps. Contrary to the earlier interpretation of delta(18)O evidence from ice cores, our new temperature history reveals a pronounced Holocene climatic optimum in Greenland coinciding with maximum thinning near the GIS margins. Our delta(18)O-based results are corroborated by the air content of ice cores, a proxy for surface elevation. State-of-the-art ice sheet models are generally found to be underestimating the extent and changes in GIS elevation and area; our findings may help to improve the ability of models to reproduce the GIS response to Holocene climate.

GIS and Game Theory for Water Resource Management

NASA Astrophysics Data System (ADS)

Ganjali, N.; Guney, C.

2017-11-01

In this study, aspects of Game theory and its application on water resources management combined with GIS techniques are detailed. First, each term is explained and the advantages and limitations of its aspect is discussed. Then, the nature of combinations between each pair and literature on the previous studies are given. Several cases were investigated and results were magnified in order to conclude with the applicability and combination of GIS- Game Theory- Water Resources Management. It is concluded that the game theory is used relatively in limited studies of water management fields such as cost/benefit allocation among users, water allocation among trans-boundary users in water resources, water quality management, groundwater management, analysis of water policies, fair allocation of water resources development cost and some other narrow fields. Also, Decision-making in environmental projects requires consideration of trade-offs between socio-political, environmental, and economic impacts and is often complicated by various stakeholder views. Most of the literature on water allocation and conflict problems uses traditional optimization models to identify the most efficient scheme while the Game Theory, as an optimization method, combined GIS are beneficial platforms for agent based models to be used in solving Water Resources Management problems in the further studies.

Optimizing and controlling earthmoving operations using spatial technologies

NASA Astrophysics Data System (ADS)

Alshibani, Adel

This thesis presents a model designed for optimizing, tracking, and controlling earthmoving operations. The proposed model utilizes, Genetic Algorithm (GA), Linear Programming (LP), and spatial technologies including Global Positioning Systems (GPS) and Geographic Information Systems (GIS) to support the management functions of the developed model. The model assists engineers and contractors in selecting near optimum crew formations in planning phase and during construction, using GA and LP supported by the Pathfinder Algorithm developed in a GIS environment. GA is used in conjunction with a set of rules developed to accelerate the optimization process and to avoid generating and evaluating hypothetical and unrealistic crew formations. LP is used to determine quantities of earth to be moved from different borrow pits and to be placed at different landfill sites to meet project constraints and to minimize the cost of these earthmoving operations. On the one hand, GPS is used for onsite data collection and for tracking construction equipment in near real-time. On the other hand, GIS is employed to automate data acquisition and to analyze the collected spatial data. The model is also capable of reconfiguring crew formations dynamically during the construction phase while site operations are in progress. The optimization of the crew formation considers: (1) construction time, (2) construction direct cost, or (3) construction total cost. The model is also capable of generating crew formations to meet, as close as possible, specified time and/or cost constraints. In addition, the model supports tracking and reporting of project progress utilizing the earned-value concept and the project ratio method with modifications that allow for more accurate forecasting of project time and cost at set future dates and at completion. The model is capable of generating graphical and tabular reports. The developed model has been implemented in prototype software, using Object-Oriented Programming, Microsoft Foundation Classes (MFC), and has been coded using visual C++ V.6. Microsoft Access is employed as database management system. The developed software operates in Microsoft windows' environment. Three example applications were analyzed to validate the development made and to illustrate the essential features of the developed model.

Development of a Mechanistically Based, Basin-Scale Stream Temperature Model: Applications to Cumulative Effects Modeling

Treesearch

Douglas Allen; William Dietrich; Peter Baker; Frank Ligon; Bruce Orr

2007-01-01

We describe a mechanistically-based stream model, BasinTemp, which assumes that direct shortwave radiation moderated by riparian and topographic shading, controls stream temperatures during the hottest part of the year. The model was developed to support a temperature TMDL for the South Fork Eel basin in Northern California and couples a GIS and a 1-D energy balance...

Interfacing geographic information systems and remote sensing for rural land-use analysis

NASA Technical Reports Server (NTRS)

Nellis, M. Duane; Lulla, Kamlesh; Jensen, John

1990-01-01

Recent advances in computer-based geographic information systems (GISs) are briefly reviewed, with an emphasis on the incorporation of remote-sensing data in GISs for rural applications. Topics addressed include sampling procedures for rural land-use analyses; GIS-based mapping of agricultural land use and productivity; remote sensing of land use and agricultural, forest, rangeland, and water resources; monitoring the dynamics of irrigation agriculture; GIS methods for detecting changes in land use over time; and the development of land-use modeling strategies.

Study on application of dynamic monitoring of land use based on mobile GIS technology

NASA Astrophysics Data System (ADS)

Tian, Jingyi; Chu, Jian; Guo, Jianxing; Wang, Lixin

2006-10-01

The land use dynamic monitoring is an important mean to maintain the real-time update of the land use data. Mobile GIS technology integrates GIS, GPS and Internet. It can update the historic al data in real time with site-collected data and realize the data update in large scale with high precision. The Monitoring methods on the land use change data with the mobile GIS technology were discussed. Mobile terminal of mobile GIS has self-developed for this study with GPS-25 OEM and notebook computer. The RTD (real-time difference) operation mode is selected. Mobile GIS system of dynamic monitoring of land use have developed with Visual C++ as operation platform, MapObjects control as graphic platform and MSCmm control as communication platform, which realizes organic integration of GPS, GPRS and GIS. This system has such following basic functions as data processing, graphic display, graphic editing, attribute query and navigation. Qinhuangdao city was selected as the experiential area. Shown by the study result, the mobile GIS integration system of dynamic monitoring of land use developed by this study has practical application value.

Development of a 3D WebGIS System for Retrieving and Visualizing CityGML Data Based on their Geometric and Semantic Characteristics by Using Free and Open Source Technology

NASA Astrophysics Data System (ADS)

Pispidikis, I.; Dimopoulou, E.

2016-10-01

CityGML is considered as an optimal standard for representing 3D city models. However, international experience has shown that visualization of the latter is quite difficult to be implemented on the web, due to the large size of data and the complexity of CityGML. As a result, in the context of this paper, a 3D WebGIS application is developed in order to successfully retrieve and visualize CityGML data in accordance with their respective geometric and semantic characteristics. Furthermore, the available web technologies and the architecture of WebGIS systems are investigated, as provided by international experience, in order to be utilized in the most appropriate way for the purposes of this paper. Specifically, a PostgreSQL/ PostGIS Database is used, in compliance with the 3DCityDB schema. At Server tier, Apache HTTP Server and GeoServer are utilized, while a Server Side programming language PHP is used. At Client tier, which implemented the interface of the application, the following technologies were used: JQuery, AJAX, JavaScript, HTML5, WebGL and Ol3-Cesium. Finally, it is worth mentioning that the application's primary objectives are a user-friendly interface and a fully open source development.

Teaching Practical Science Online Using GIS: A Cautionary Tale of Coping Strategies

ERIC Educational Resources Information Center

Argles, Tom

2017-01-01

Strong demand for GIS and burgeoning cohorts have encouraged the delivery of GIS teaching via online distance education models. This contribution reviews a brief foray (2012-2014) into this field by the Open University, deploying open source GIS software to enable students to perform practical science investigations online. The "Remote…

An Overview of GIS-Based Modeling and Assessment of Mining-Induced Hazards: Soil, Water, and Forest

PubMed Central

Kim, Sung-Min; Yi, Huiuk; Choi, Yosoon

2017-01-01

In this study, current geographic information system (GIS)-based methods and their application for the modeling and assessment of mining-induced hazards were reviewed. Various types of mining-induced hazard, including soil contamination, soil erosion, water pollution, and deforestation were considered in the discussion of the strength and role of GIS as a viable problem-solving tool in relation to mining-induced hazards. The various types of mining-induced hazard were classified into two or three subtopics according to the steps involved in the reclamation procedure, or elements of the hazard of interest. Because GIS is appropriated for the handling of geospatial data in relation to mining-induced hazards, the application and feasibility of exploiting GIS-based modeling and assessment of mining-induced hazards within the mining industry could be expanded further. PMID:29186922

An Overview of GIS-Based Modeling and Assessment of Mining-Induced Hazards: Soil, Water, and Forest.

PubMed

Suh, Jangwon; Kim, Sung-Min; Yi, Huiuk; Choi, Yosoon

2017-11-27

In this study, current geographic information system (GIS)-based methods and their application for the modeling and assessment of mining-induced hazards were reviewed. Various types of mining-induced hazard, including soil contamination, soil erosion, water pollution, and deforestation were considered in the discussion of the strength and role of GIS as a viable problem-solving tool in relation to mining-induced hazards. The various types of mining-induced hazard were classified into two or three subtopics according to the steps involved in the reclamation procedure, or elements of the hazard of interest. Because GIS is appropriated for the handling of geospatial data in relation to mining-induced hazards, the application and feasibility of exploiting GIS-based modeling and assessment of mining-induced hazards within the mining industry could be expanded further.

Sensitivity of wildlife habitat models to uncertainties in GIS data

NASA Technical Reports Server (NTRS)

Stoms, David M.; Davis, Frank W.; Cogan, Christopher B.

1992-01-01

Decision makers need to know the reliability of output products from GIS analysis. For many GIS applications, it is not possible to compare these products to an independent measure of 'truth'. Sensitivity analysis offers an alternative means of estimating reliability. In this paper, we present a CIS-based statistical procedure for estimating the sensitivity of wildlife habitat models to uncertainties in input data and model assumptions. The approach is demonstrated in an analysis of habitat associations derived from a GIS database for the endangered California condor. Alternative data sets were generated to compare results over a reasonable range of assumptions about several sources of uncertainty. Sensitivity analysis indicated that condor habitat associations are relatively robust, and the results have increased our confidence in our initial findings. Uncertainties and methods described in the paper have general relevance for many GIS applications.

A Web GIS Enabled Comprehensive Hydrologic Information System for Indian Water Resources Systems

NASA Astrophysics Data System (ADS)

Goyal, A.; Tyagi, H.; Gosain, A. K.; Khosa, R.

2017-12-01

Hydrological systems across the globe are getting increasingly water stressed with each passing season due to climate variability & snowballing water demand. Hence, to safeguard food, livelihood & economic security, it becomes imperative to employ scientific studies for holistic management of indispensable resource like water. However, hydrological study of any scale & purpose is heavily reliant on various spatio-temporal datasets which are not only difficult to discover/access but are also tough to use & manage. Besides, owing to diversity of water sector agencies & dearth of standard operating procedures, seamless information exchange is challenging for collaborators. Extensive research is being done worldwide to address these issues but regrettably not much has been done in developing countries like India. Therefore, the current study endeavours to develop a Hydrological Information System framework in a Web-GIS environment for empowering Indian water resources systems. The study attempts to harmonize the standards for metadata, terminology, symbology, versioning & archiving for effective generation, processing, dissemination & mining of data required for hydrological studies. Furthermore, modelers with humble computing resources at their disposal, can consume this standardized data in high performance simulation modelling using cloud computing within the developed Web-GIS framework. They can also integrate the inputs-outputs of different numerical models available on the platform and integrate their results for comprehensive analysis of the chosen hydrological system. Thus, the developed portal is an all-in-one framework that can facilitate decision makers, industry professionals & researchers in efficient water management.

Modeling of natural risks in GIS, decision support in the Civil Protection and Emergency Planning

NASA Astrophysics Data System (ADS)

Santos, M.; Martins, L.; Moreira, S.; Costa, A.; Matos, F.; Teixeira, M.; Bateira, C.

2012-04-01

The assessment of natural hazards in Civil Protection is essential in the prevention and mitigation of emergency situations. This paper presents the results of the development of mapping susceptibility to landslides, floods, forest fires and soil erosion, using GIS (Geographic Information System) tools in two municipalities - Santo Tirso and Trofa - in the district of Oporto, in the northwest of Portugal. The mapping of natural hazards fits in the legislative plan of the Municipal Civil Protection (Law No. 65/2007 of 12 November) and it provides the key elements to planning and preparing an appropriate response in case some of the processes / phenomena occur, thus optimizing the procedures for protection and relief provided by the Municipal Civil Protection Service. Susceptibility mapping to landslides, floods, forest fires and soil erosion was performed with GIS tools resources. The methodology used to compile the mapping of landslides, forest fires and soil erosion was based on the modeling of different conditioning factors and validated with field work and event log. The mapping of susceptibility to floods and flooding was developed through mathematical parameters (statistical, hydrologic and hydraulic), supported by field work and the recognition of individual characteristics of each sector analysis and subsequently analyzed in a GIS environment The mapping proposal was made in 1:5000 scale which allows not only the identification of large sets affected by the spatial dynamics of the processes / phenomena, but also a more detailed analysis, especially when combined with geographic information systems (GIS) thus allowing to study more specific situations that require a quick response. The maps developed in this study are fundamental to the understanding, prediction and prevention of susceptibility and risks present in the municipalities, being a valuable tool in the process of Emergency Planning, since it identifies priority areas of intervention for farther detail analysis, promote and safeguard mechanisms to prevent injury and it anticipates the possibility of potential interventions that can minimize the risk.

Modeling the hydrophysical soil properties as a part of self-regulated flood dams projection in gis-environment for sustainable urban development

NASA Astrophysics Data System (ADS)

Nikonorov, Aleksandr; Terleev, Vitaly; Badenko, Vladimir; Mirschel, Wilfried; Abakumov, Evgeny; Ginevsky, Roman; Lazarev, Viktor; Togo, Issa; Volkova, Yulia; Melnichuk, Aleksandr; Dunaieva, Ielizaveta; Akimov, Luka

2017-10-01

The problem of flood protection measures are considered in the paper. The regulation of river flow by the system of Self-Regulated Flood Dams (SRFD) is analyzed. The method of SRFD modeling in GIS environment is proposed. The question of the ecological aspect of the SRFD management is considered based on the hydrophysical properties of the soil. The improved Mualem-Van Genuchted method is proposed for the evaluation of the possible SRFD location influence on the soil of flooded territory - the temporary reservoirs. The importance and utility of the proposed complex method is stated.

Using a remote sensing/GIS model to predict southwestern Willow Flycatcher breeding habitat along the Rio Grande, New Mexico

USGS Publications Warehouse

Hatten, James R.; Sogge, Mark K.

2007-01-01

Introduction The Southwestern Willow Flycatcher (Empidonax traillii extimus; hereafter SWFL) is a federally endangered bird (USFWS 1995) that breeds in riparian areas in portions of New Mexico, Arizona, southwestern Colorado, extreme southern Utah and Nevada, and southern California (USFWS 2002). Across this range, it uses a variety of plant species as nesting/breeding habitat, but in all cases prefers sites with dense vegetation, high canopy, and proximity to surface water or saturated soils (Sogge and Marshall 2000). As of 2005, the known rangewide breeding population of SWFLs was roughly 1,214 territories, with approximately 393 territories distributed among 36 sites in New Mexico (Durst et al. 2006), primarily along the Rio Grande. One of the key challenges facing the management and conservation of the Southwestern Willow Flycatcher is that riparian areas are dynamic, with individual habitat patches subject to cycles of creation, growth, and loss due to drought, flooding, fire, and other disturbances. Former breeding patches can lose suitability, and new habitat can develop within a matter of only a few years, especially in reservoir drawdown zones. Therefore, measuring and predicting flycatcher habitat - either to discover areas that might support SWFLs, or to identify areas that may develop into appropriate habitat - requires knowledge of recent/current habitat conditions and an understanding of the factors that determine flycatcher use of riparian breeding sites. In the past, much of the determination of whether a riparian site is likely to support breeding flycatchers has been based on qualitative criteria (for example, 'dense vegetation' or 'large patches'). These determinations often require on-the-ground field evaluations by local or regional SWFL experts. While this has proven valuable in locating many of the currently known breeding sites, it is difficult or impossible to apply this approach effectively over large geographic areas (for example, the middle Rio Grande). The SWFL Recovery Plan (USFWS 2002) recognizes the importance of developing new approaches to habitat identification, and recommends the development of drainage-scale, quantitative habitat models. In particular, the plan suggests using models based on remote sensing and Geographic Information System (GIS) technology that can capture the relatively dynamic habitat changes that occur in southwestern riparian systems. In 1999, Arizona Game and Fish Department (AGFD) developed a GIS-based model (Hatten and Paradzick 2003) to identify SWFL breeding habitat from Landsat Thematic Mapper imagery and 30-m resolution digital elevation models (DEMs). The model was developed with presence/absence survey data acquired along the San Pedro and Gila rivers, and from the Salt River and Tonto Creek inlets to Roosevelt Lake in southern Arizona (collectively called the project area). The GIS-based model used a logistic regression equation to divide riparian vegetation into 5 probability classes based upon characteristics of riparian vegetation and floodplain size. This model was tested by predicting SWFL breeding habitat at Alamo Lake, Arizona, located 200 km from the project area (Hatten and Paradzick 2003). The GIS-based model performed as expected by identifying riparian areas with the highest SWFL nest densities, located in the higher probability classes. In 2002, AGFD applied the GIS-based model throughout Arizona, for riparian areas below 1,524 m (5,000 ft) elevation and within 1.6 km of perennial or intermittent waters (Dockens et al. 2004). Overall model accuracy (using probability classes 1-5, with class 5 having the greatest probability of nesting activity) for predicting the location of 2001 nest sites was 96.5 percent; accuracy decreased when fewer probability classes were defined as suitable. Map accuracy, determined from errors of commission, increased in higher probability classes in a fashion similar to errors of omission. Map accuracy, li

Collaborative Multi-Scale 3d City and Infrastructure Modeling and Simulation

NASA Astrophysics Data System (ADS)

Breunig, M.; Borrmann, A.; Rank, E.; Hinz, S.; Kolbe, T.; Schilcher, M.; Mundani, R.-P.; Jubierre, J. R.; Flurl, M.; Thomsen, A.; Donaubauer, A.; Ji, Y.; Urban, S.; Laun, S.; Vilgertshofer, S.; Willenborg, B.; Menninghaus, M.; Steuer, H.; Wursthorn, S.; Leitloff, J.; Al-Doori, M.; Mazroobsemnani, N.

2017-09-01

Computer-aided collaborative and multi-scale 3D planning are challenges for complex railway and subway track infrastructure projects in the built environment. Many legal, economic, environmental, and structural requirements have to be taken into account. The stringent use of 3D models in the different phases of the planning process facilitates communication and collaboration between the stake holders such as civil engineers, geological engineers, and decision makers. This paper presents concepts, developments, and experiences gained by an interdisciplinary research group coming from civil engineering informatics and geo-informatics banding together skills of both, the Building Information Modeling and the 3D GIS world. New approaches including the development of a collaborative platform and 3D multi-scale modelling are proposed for collaborative planning and simulation to improve the digital 3D planning of subway tracks and other infrastructures. Experiences during this research and lessons learned are presented as well as an outlook on future research focusing on Building Information Modeling and 3D GIS applications for cities of the future.

A multiscaled model of southwestern willow flycatcher breeding habitat

USGS Publications Warehouse

Hatten, J.R.; Paradzick, C.E.

2003-01-01

The southwestern willow flycatcher (SWFL; Empidonax traillii extimus) is an endangered songbird whose habitat has declined dramatically over the last century. Understanding habitat selection patterns and the ability to identify potential breeding areas for the SWFL is crucial to the management and conservation of this species. We developed a multiscaled model of SWTL breeding habitat with a Geographic Information System (GIS), survey data, GIS variables, and multiple logistic regressions. We obtained presence and absence survey data from a riverine ecosystem and a reservoir delta in south-central Arizona, USA, in 1999. We extracted the GIS variables from satellite imagery and digital elevation models to characterize vegetation and floodplain within the project area. We used multiple logistic regressions within a cell-based (30 X 30 m) modeling environment to (1) determine associations between GIS variables and breeding-site occurrence at different spatial scales (0.09-72 ha), and (2) construct a predictive model. Our best model explained 54% of the variability in breeding-site occurrence with the following variables: vegetation density at the site (0.09 ha), proportion of dense vegetation and variability in vegetation density within a 4.5-ha neighborhood, and amount of floodplain or flat terrain within a 41-ha neighborhood. The density of breeding sites was highest in areas that the model predicted to be most suitable within the project area and at an external test site 200 km away. Conservation efforts must focus on protecting not only occupied patches, but also surrounding riparian forests and floodplain to ensure long-term viability of SWTL. We will use the multiscaled model to map SWTL breeding habitat in Arizona, prioritize future survey effort, and examine changes in habitat abundance and quality over time.

Development of 72kV High Pressure Air-insulated GIS with Vacuum Circuit Breaker

NASA Astrophysics Data System (ADS)

Rokunohe, Toshiaki; Yagihashi, Yoshitaka; Endo, Fumihiro; Aoyagi, Kenji; Saitoh, Hitoshi; Oomori, Takashi

SF6 gas has excellent dielectric strength and interruption performance. For these reasons, it has been widely used for gas insulated switchgear (GIS). However, use of SF6 gas has become regulated under agreements set at the 1997 COP3. So investigation and development for GIS with a lower amount of SF6 gas are being carried out worldwide. Presently, SF6 gas-free GIS has been commercialized for the 24kV class. Air or N2 gas is used as insulation gas for this GIS. On the other hand, SF6 gas-free GIS has not been commercialized for 72kV class GIS. Dielectric strengths of air and N2 gas are approximately 1/3 that of SF6 gas. So to enhance insulation performance of air and N2, we have investigated a hybrid gas insulation system which has the combined features of providing an insulation coating and suitable insulation gas. We have developed the world's first 72kV SF6 gas-free GIS. This paper deals with key technologies for SF6 gas-free GIS such as the hybrid insulation structure, bellows for the high pressure vacuum circuit breaker, a newly designed disconnector and spacer and prevention of particle levitation. Test results of 72kV high pressure air-insulated GIS with the vacuum circuit breaker are described.

EuGI: a novel resource for studying genomic islands to facilitate horizontal gene transfer detection in eukaryotes.

PubMed

Clasen, Frederick Johannes; Pierneef, Rian Ewald; Slippers, Bernard; Reva, Oleg

2018-05-03

Genomic islands (GIs) are inserts of foreign DNA that have potentially arisen through horizontal gene transfer (HGT). There are evidences that GIs can contribute significantly to the evolution of prokaryotes. The acquisition of GIs through HGT in eukaryotes has, however, been largely unexplored. In this study, the previously developed GI prediction tool, SeqWord Gene Island Sniffer (SWGIS), is modified to predict GIs in eukaryotic chromosomes. Artificial simulations are used to estimate ratios of predicting false positive and false negative GIs by inserting GIs into different test chromosomes and performing the SWGIS v2.0 algorithm. Using SWGIS v2.0, GIs are then identified in 36 fungal, 22 protozoan and 8 invertebrate genomes. SWGIS v2.0 predicts GIs in large eukaryotic chromosomes based on the atypical nucleotide composition of these regions. Averages for predicting false negative and false positive GIs were 20.1% and 11.01% respectively. A total of 10,550 GIs were identified in 66 eukaryotic species with 5299 of these GIs coding for at least one functional protein. The EuGI web-resource, freely accessible at http://eugi.bi.up.ac.za , was developed that allows browsing the database created from identified GIs and genes within GIs through an interactive and visual interface. SWGIS v2.0 along with the EuGI database, which houses GIs identified in 66 different eukaryotic species, and the EuGI web-resource, provide the first comprehensive resource for studying HGT in eukaryotes.

Spatio-temporal variation of urban ultrafine particle number concentrations

NASA Astrophysics Data System (ADS)

Ragettli, Martina S.; Ducret-Stich, Regina E.; Foraster, Maria; Morelli, Xavier; Aguilera, Inmaculada; Basagaña, Xavier; Corradi, Elisabetta; Ineichen, Alex; Tsai, Ming-Yi; Probst-Hensch, Nicole; Rivera, Marcela; Slama, Rémy; Künzli, Nino; Phuleria, Harish C.

2014-10-01

Methods are needed to characterize short-term exposure to ultrafine particle number concentrations (UFP) for epidemiological studies on the health effects of traffic-related UFP. Our aims were to assess season-specific spatial variation of short-term (20-min) UFP within the city of Basel, Switzerland, and to develop hybrid models for predicting short-term median and mean UFP levels on sidewalks. We collected measurements of UFP for periods of 20 min (MiniDiSC particle counter) and determined traffic volume along sidewalks at 60 locations across the city, during non-rush hours in three seasons. For each monitoring location, detailed spatial characteristics were locally recorded and potential predictor variables were derived from geographic information systems (GIS). We built multivariate regression models to predict local UFP, using concurrent UFP levels measured at a suburban background station, and combinations of meteorological, temporal, GIS and observed site characteristic variables. For a subset of sites, we assessed the relationship between UFP measured on the sidewalk and at the nearby residence (i.e., home outdoor exposure on e.g. balconies). The average median 20-min UFP levels at street and urban background sites were 14,700 ± 9100 particles cm-3 and 9900 ± 8600 particles cm-3, respectively, with the highest levels occurring in winter and the lowest in summer. The most important predictor for all models was the suburban background UFP concentration, explaining 50% and 38% of the variability of the median and mean, respectively. While the models with GIS-derived variables (R2 = 0.61) or observed site characteristics (R2 = 0.63) predicted median UFP levels equally well, mean UFP predictions using only site characteristic variables (R2 = 0.62) showed a better fit than models using only GIS variables (R2 = 0.55). The best model performance was obtained by using a combination of GIS-derived variables and locally observed site characteristics (median: R2 = 0.66; mean: R2 = 0.65). The 20-min UFP concentrations measured at the sidewalk were strongly related (R2 = 0.8) to the concurrent 20-min residential UFP levels nearby. Our results indicate that median UFP can be moderately predicted by means of a suburban background site and GIS-derived traffic and land use variables. In areas and regions where large-scale GIS data are not available, the spatial distribution of traffic-related UFP may be assessed reasonably well by collecting on-site short-term traffic and land-use data.

Application of GIS-based Procedure on Slopeland Use Classification and Identification

NASA Astrophysics Data System (ADS)

KU, L. C.; LI, M. C.

2016-12-01

In Taiwan, the "Slopeland Conservation and Utilization Act" regulates the management of the slopelands. It categorizes the slopeland into land suitable for agricultural or animal husbandry, land suitable for forestry and land for enhanced conservation, according to the environmental factors of average slope, effective soil depth, soil erosion and parental rock. Traditionally, investigations of environmental factors require cost-effective field works. It has been confronted with many practical issues such as non-evaluated cadastral parcels, evaluation results depending on expert's opinion, difficulties in field measurement and judgment, and time consuming. This study aimed to develop a GIS-based procedure involved in the acceleration of slopeland use classification and quality improvement. First, the environmental factors of slopelands were analyzed by GIS and SPSS software. The analysis involved with the digital elevation model (DEM), soil depth map, land use map and satellite images. Second, 5% of the analyzed slopelands were selected to perform the site investigations and correct the results of classification. Finally, a 2nd examination was involved by randomly selected 2% of the analyzed slopelands to perform the accuracy evaluation. It was showed the developed procedure is effective in slopeland use classification and identification. Keywords: Slopeland Use Classification, GIS, Management

Natural and environmental vulnerability analysis through remote sensing and GIS techniques: a case study of Indigirka River basin, Eastern Siberia, Russia

NASA Astrophysics Data System (ADS)

Boori, Mukesh S.; Choudhary, Komal; Kupriyanov, Alexander; Sugimoto, Atsuko; Evers, Mariele

2016-10-01

The aim of this research work is to understand natural and environmental vulnerability situation and its cause such as intensity, distribution and socio-economic effect in the Indigirka River basin, Eastern Siberia, Russia. This paper identifies, assess and classify natural and environmental vulnerability using landscape pattern from multidisciplinary approach, based on remote sensing and Geographical Information System (GIS) techniques. A model was developed by following thematic layers: land use/cover, vegetation, wetland, geology, geomorphology and soil in ArcGIS 10.2 software. According to numerical results vulnerability classified into five levels: low, sensible, moderate, high and extreme vulnerability by mean of cluster principal. Results are shows that in natural vulnerability maximum area covered by moderate (29.84%) and sensible (38.61%) vulnerability and environmental vulnerability concentrated by moderate (49.30%) vulnerability. So study area has at medial level vulnerability. The results found that the methodology applied was effective enough in the understanding of the current conservation circumstances of the river basin in relation to their environment with the help of remote sensing and GIS. This study is helpful for decision making for eco-environmental recovering and rebuilding as well as predicting the future development.

NCWin — A Component Object Model (COM) for processing and visualizing NetCDF data

USGS Publications Warehouse

Liu, Jinxun; Chen, J.M.; Price, D.T.; Liu, S.

2005-01-01

NetCDF (Network Common Data Form) is a data sharing protocol and library that is commonly used in large-scale atmospheric and environmental data archiving and modeling. The NetCDF tool described here, named NCWin and coded with Borland C + + Builder, was built as a standard executable as well as a COM (component object model) for the Microsoft Windows environment. COM is a powerful technology that enhances the reuse of applications (as components). Environmental model developers from different modeling environments, such as Python, JAVA, VISUAL FORTRAN, VISUAL BASIC, VISUAL C + +, and DELPHI, can reuse NCWin in their models to read, write and visualize NetCDF data. Some Windows applications, such as ArcGIS and Microsoft PowerPoint, can also call NCWin within the application. NCWin has three major components: 1) The data conversion part is designed to convert binary raw data to and from NetCDF data. It can process six data types (unsigned char, signed char, short, int, float, double) and three spatial data formats (BIP, BIL, BSQ); 2) The visualization part is designed for displaying grid map series (playing forward or backward) with simple map legend, and displaying temporal trend curves for data on individual map pixels; and 3) The modeling interface is designed for environmental model development by which a set of integrated NetCDF functions is provided for processing NetCDF data. To demonstrate that the NCWin can easily extend the functions of some current GIS software and the Office applications, examples of calling NCWin within ArcGIS and MS PowerPoint for showing NetCDF map animations are given.

The HEC RAS model of regulated stream for purposes of flood risk reduction

NASA Astrophysics Data System (ADS)

Fijko, Rastislav; Zeleňáková, Martina

2016-06-01

The work highlights the modeling of water flow in open channels using 1D mathematical model HEC-RAS in the area of interest Lopuchov village in eastern Slovakia. We created a digital model from a geodetic survey, which was used to show the area of inundation in ArcGIS software. We point out the modeling methodology with emphasis to collection of the data and their relevance for determination of boundary conditions in 3D model of the study area in GIS platform. The BIM objects can be exported to the defined model of the area. The obtained results were used for simulation of flooding. The results give to us clearly and distinctly defined areas of inundation, which we used in the processing of Cost benefit analysis. We used the developed model for stating the potential damages in flood vulnerable areas.

ArcGIS Framework for Scientific Data Analysis and Serving

NASA Astrophysics Data System (ADS)

Xu, H.; Ju, W.; Zhang, J.

2015-12-01

ArcGIS is a platform for managing, visualizing, analyzing, and serving geospatial data. Scientific data as part of the geospatial data features multiple dimensions (X, Y, time, and depth) and large volume. Multidimensional mosaic dataset (MDMD), a newly enhanced data model in ArcGIS, models the multidimensional gridded data (e.g. raster or image) as a hypercube and enables ArcGIS's capabilities to handle the large volume and near-real time scientific data. Built on top of geodatabase, the MDMD stores the dimension values and the variables (2D arrays) in a geodatabase table which allows accessing a slice or slices of the hypercube through a simple query and supports animating changes along time or vertical dimension using ArcGIS desktop or web clients. Through raster types, MDMD can manage not only netCDF, GRIB, and HDF formats but also many other formats or satellite data. It is scalable and can handle large data volume. The parallel geo-processing engine makes the data ingestion fast and easily. Raster function, definition of a raster processing algorithm, is a very important component in ArcGIS platform for on-demand raster processing and analysis. The scientific data analytics is achieved through the MDMD and raster function templates which perform on-demand scientific computation with variables ingested in the MDMD. For example, aggregating monthly average from daily data; computing total rainfall of a year; calculating heat index for forecasting data, and identifying fishing habitat zones etc. Addtionally, MDMD with the associated raster function templates can be served through ArcGIS server as image services which provide a framework for on-demand server side computation and analysis, and the published services can be accessed by multiple clients such as ArcMap, ArcGIS Online, JavaScript, REST, WCS, and WMS. This presentation will focus on the MDMD model and raster processing templates. In addtion, MODIS land cover, NDFD weather service, and HYCOM ocean model will be used to illustrate how ArcGIS platform and MDMD model can facilitate scientific data visualization and analytics and how the analysis results can be shared to more audience through ArcGIS Online and Portal.

Regional scale flood modeling using NEXRAD rainfall, GIS, and HEC-HMS/RAS: a case study for the San Antonio River Basin Summer 2002 storm event.

PubMed

Knebl, M R; Yang, Z-L; Hutchison, K; Maidment, D R

2005-06-01

This paper develops a framework for regional scale flood modeling that integrates NEXRAD Level III rainfall, GIS, and a hydrological model (HEC-HMS/RAS). The San Antonio River Basin (about 4000 square miles, 10,000 km2) in Central Texas, USA, is the domain of the study because it is a region subject to frequent occurrences of severe flash flooding. A major flood in the summer of 2002 is chosen as a case to examine the modeling framework. The model consists of a rainfall-runoff model (HEC-HMS) that converts precipitation excess to overland flow and channel runoff, as well as a hydraulic model (HEC-RAS) that models unsteady state flow through the river channel network based on the HEC-HMS-derived hydrographs. HEC-HMS is run on a 4 x 4 km grid in the domain, a resolution consistent with the resolution of NEXRAD rainfall taken from the local river authority. Watershed parameters are calibrated manually to produce a good simulation of discharge at 12 subbasins. With the calibrated discharge, HEC-RAS is capable of producing floodplain polygons that are comparable to the satellite imagery. The modeling framework presented in this study incorporates a portion of the recently developed GIS tool named Map to Map that has been created on a local scale and extends it to a regional scale. The results of this research will benefit future modeling efforts by providing a tool for hydrological forecasts of flooding on a regional scale. While designed for the San Antonio River Basin, this regional scale model may be used as a prototype for model applications in other areas of the country.

The architecture of a virtual grid GIS server

NASA Astrophysics Data System (ADS)

Wu, Pengfei; Fang, Yu; Chen, Bin; Wu, Xi; Tian, Xiaoting

2008-10-01

The grid computing technology provides the service oriented architecture for distributed applications. The virtual Grid GIS server is the distributed and interoperable enterprise application GIS architecture running in the grid environment, which integrates heterogeneous GIS platforms. All sorts of legacy GIS platforms join the grid as members of GIS virtual organization. Based on Microkernel we design the ESB and portal GIS service layer, which compose Microkernel GIS. Through web portals, portal GIS services and mediation of service bus, following the principle of SoC, we separate business logic from implementing logic. Microkernel GIS greatly reduces the coupling degree between applications and GIS platforms. The enterprise applications are independent of certain GIS platforms, and making the application developers to pay attention to the business logic. Via configuration and orchestration of a set of fine-grained services, the system creates GIS Business, which acts as a whole WebGIS request when activated. In this way, the system satisfies a business workflow directly and simply, with little or no new code.

Coupling HYDRUS-1D with ArcGIS to estimate pesticide accumulation and leaching risk on a regional basis.

PubMed

Anlauf, Ruediger; Schaefer, Jenny; Kajitvichyanukul, Puangrat

2018-07-01

HYDRUS-1D is a well-established reliable instrument to simulate water and pesticide transport in soils. It is, however, a point-specific model which is usually used for site-specific simulations. Aim of the investigation was the development of pesticide accumulation and leaching risk maps for regions combining HYDRUS-1D as a model for pesticide fate with regional data in a geographical information system (GIS). It was realized in form of a python tool in ArcGIS. Necessary high resolution local soil information, however, is very often not available. Therefore, worldwide interpolated 250-m-grid soil data (SoilGrids.org) were successfully incorporated to the system. The functionality of the system is shown by examples from Thailand, where example regions that differ in soil properties and climatic conditions were exposed in the model system to pesticides with different properties. A practical application of the system will be the identification of areas where measures to optimize pesticide use should be implemented with priority. Copyright © 2018 Elsevier Ltd. All rights reserved.

GIS Based Distributed Runoff Predictions in Variable Source Area Watersheds Employing the SCS-Curve Number

NASA Astrophysics Data System (ADS)

Steenhuis, T. S.; Mendoza, G.; Lyon, S. W.; Gerard Marchant, P.; Walter, M. T.; Schneiderman, E.

2003-04-01

Because the traditional Soil Conservation Service Curve Number (SCS-CN) approach continues to be ubiquitously used in GIS-BASED water quality models, new application methods are needed that are consistent with variable source area (VSA) hydrological processes in the landscape. We developed within an integrated GIS modeling environment a distributed approach for applying the traditional SCS-CN equation to watersheds where VSA hydrology is a dominant process. Spatial representation of hydrologic processes is important for watershed planning because restricting potentially polluting activities from runoff source areas is fundamental to controlling non-point source pollution. The methodology presented here uses the traditional SCS-CN method to predict runoff volume and spatial extent of saturated areas and uses a topographic index to distribute runoff source areas through watersheds. The resulting distributed CN-VSA method was incorporated in an existing GWLF water quality model and applied to sub-watersheds of the Delaware basin in the Catskill Mountains region of New York State. We found that the distributed CN-VSA approach provided a physically-based method that gives realistic results for watersheds with VSA hydrology.

Ontology patterns for complex topographic feature yypes

USGS Publications Warehouse

Varanka, Dalia E.

2011-01-01

Complex feature types are defined as integrated relations between basic features for a shared meaning or concept. The shared semantic concept is difficult to define in commonly used geographic information systems (GIS) and remote sensing technologies. The role of spatial relations between complex feature parts was recognized in early GIS literature, but had limited representation in the feature or coverage data models of GIS. Spatial relations are more explicitly specified in semantic technology. In this paper, semantics for topographic feature ontology design patterns (ODP) are developed as data models for the representation of complex features. In the context of topographic processes, component assemblages are supported by resource systems and are found on local landscapes. The topographic ontology is organized across six thematic modules that can account for basic feature types, resource systems, and landscape types. Types of complex feature attributes include location, generative processes and physical description. Node/edge networks model standard spatial relations and relations specific to topographic science to represent complex features. To demonstrate these concepts, data from The National Map of the U. S. Geological Survey was converted and assembled into ODP.

Design and Implementation of Campus Application APP Based on Android

NASA Astrophysics Data System (ADS)

dongxu, Zhu; yabin, liu; xian lei, PI; weixiang, Zhou; meng, Huang

2017-07-01

In this paper, "Internet + campus" as the entrance of the Android technology based on the application of campus design and implementation of Application program. Based on GIS(Geographic Information System) spatial database, GIS spatial analysis technology, Java development technology and Android development technology, this system server adopts the Model View Controller architectue to realize the efficient use of campus information and provide real-time information of all kinds of learning and life for campus student at the same time. "Fingertips on the Institute of Disaster Prevention Science and Technology" release for the campus students of all grades of life, learning, entertainment provides a convenient.

A GIS-based atmospheric dispersion model for pollutants emitted by complex source areas.

PubMed

Teggi, Sergio; Costanzini, Sofia; Ghermandi, Grazia; Malagoli, Carlotta; Vinceti, Marco

2018-01-01

Gaussian dispersion models are widely used to simulate the concentrations and deposition fluxes of pollutants emitted by source areas. Very often, the calculation time limits the number of sources and receptors and the geometry of the sources must be simple and without holes. This paper presents CAREA, a new GIS-based Gaussian model for complex source areas. CAREA was coded in the Python language, and is largely based on a simplified formulation of the very popular and recognized AERMOD model. The model allows users to define in a GIS environment thousands of gridded or scattered receptors and thousands of complex sources with hundreds of vertices and holes. CAREA computes ground level, or near ground level, concentrations and dry deposition fluxes of pollutants. The input/output and the runs of the model can be completely managed in GIS environment (e.g. inside a GIS project). The paper presents the CAREA formulation and its applications to very complex test cases. The tests shows that the processing time are satisfactory and that the definition of sources and receptors and the output retrieval are quite easy in a GIS environment. CAREA and AERMOD are compared using simple and reproducible test cases. The comparison shows that CAREA satisfactorily reproduces AERMOD simulations and is considerably faster than AERMOD. Copyright © 2017 Elsevier B.V. All rights reserved.

Integration of geospatial multi-mode transportation Systems in Kuala Lumpur

NASA Astrophysics Data System (ADS)

Ismail, M. A.; Said, M. N.

2014-06-01

Public transportation serves people with mobility and accessibility to workplaces, health facilities, community resources, and recreational areas across the country. Development in the application of Geographical Information Systems (GIS) to transportation problems represents one of the most important areas of GIS-technology today. To show the importance of GIS network analysis, this paper highlights the determination of the optimal path between two or more destinations based on multi-mode concepts. The abstract connector is introduced in this research as an approach to integrate urban public transportation in Kuala Lumpur, Malaysia including facilities such as Light Rapid Transit (LRT), Keretapi Tanah Melayu (KTM) Komuter, Express Rail Link (ERL), KL Monorail, road driving as well as pedestrian modes into a single intelligent data model. To assist such analysis, ArcGIS's Network Analyst functions are used whereby the final output includes the total distance, total travelled time, directional maps produced to find the quickest, shortest paths, and closest facilities based on either time or distance impedance for multi-mode route analysis.

Using remote sensing and GIS techniques to estimate discharge and recharge. fluxes for the Death Valley regional groundwater flow system, USA

USGS Publications Warehouse

D'Agnese, F. A.; Faunt, C.C.; Keith, Turner A.

1996-01-01

The recharge and discharge components of the Death Valley regional groundwater flow system were defined by remote sensing and GIS techniques that integrated disparate data types to develop a spatially complex representation of near-surface hydrological processes. Image classification methods were applied to multispectral satellite data to produce a vegetation map. This map provided a basis for subsequent evapotranspiration and infiltration estimations. The vegetation map was combined with ancillary data in a GIS to delineate different types of wetlands, phreatophytes and wet playa areas. Existing evapotranspiration-rate estimates were then used to calculate discharge volumes for these areas. A previously used empirical method of groundwater recharge estimation was modified by GIS methods to incorporate data describing soil-moisture conditions, and a recharge potential map was produced. These discharge and recharge maps were readily converted to data arrays for numerical modelling codes. Inverse parameter estimation techniques also used these data to evaluate the reliability and sensitivity of estimated values.

Modeling potential Emerald Ash Borer spread through GIS/cell-based/gravity models with data bolstered by web-based inputs

Treesearch

Louis R. Iverson; Anantha M. Prasad; Davis Sydnor; Jonathan Bossenbroek; Mark W. Schwartz; Mark W. Schwartz

2006-01-01

We model the susceptibility and potential spread of the organism across the eastern United States and especially through Michigan and Ohio using Forest Inventory and Analysis (FIA) data. We are also developing a cell-based model for the potential spread of the organism. We have developed a web-based tool for public agencies and private individuals to enter the...

SDMtoolbox 2.0: the next generation Python-based GIS toolkit for landscape genetic, biogeographic and species distribution model analyses

PubMed Central

Bennett, Joseph R.; French, Connor M.

2017-01-01

SDMtoolbox 2.0 is a software package for spatial studies of ecology, evolution, and genetics. The release of SDMtoolbox 2.0 allows researchers to use the most current ArcGIS software and MaxEnt software, and reduces the amount of time that would be spent developing common solutions. The central aim of this software is to automate complicated and repetitive spatial analyses in an intuitive graphical user interface. One core tenant facilitates careful parameterization of species distribution models (SDMs) to maximize each model’s discriminatory ability and minimize overfitting. This includes carefully processing of occurrence data, environmental data, and model parameterization. This program directly interfaces with MaxEnt, one of the most powerful and widely used species distribution modeling software programs, although SDMtoolbox 2.0 is not limited to species distribution modeling or restricted to modeling in MaxEnt. Many of the SDM pre- and post-processing tools have ‘universal’ analogs for use with any modeling software. The current version contains a total of 79 scripts that harness the power of ArcGIS for macroecology, landscape genetics, and evolutionary studies. For example, these tools allow for biodiversity quantification (such as species richness or corrected weighted endemism), generation of least-cost paths and corridors among shared haplotypes, assessment of the significance of spatial randomizations, and enforcement of dispersal limitations of SDMs projected into future climates—to only name a few functions contained in SDMtoolbox 2.0. Lastly, dozens of generalized tools exists for batch processing and conversion of GIS data types or formats, which are broadly useful to any ArcMap user. PMID:29230356

Integration of SRTM and TRMM date into the GIS-based hydrological model for the purpose of flood modelling

NASA Astrophysics Data System (ADS)

Akbari, A.; Abu Samah, A.; Othman, F.

2012-04-01

Due to land use and climate changes, more severe and frequent floods occur worldwide. Flood simulation as the first step in flood risk management can be robustly conducted with integration of GIS, RS and flood modeling tools. The primary goal of this research is to examine the practical use of public domain satellite data and GIS-based hydrologic model. Firstly, database development process is described. GIS tools and techniques were used in the light of relevant literature to achieve the appropriate database. Watershed delineation and parameterizations were carried out using cartographic DEM derived from digital topography at a scale of 1:25 000 with 30 m cell size and SRTM elevation data at 30 m cell size. The SRTM elevation dataset is evaluated and compared with cartographic DEM. With the assistance of statistical measures such as Correlation coefficient (r), Nash-Sutcliffe efficiency (NSE), Percent Bias (PBias) or Percent of Error (PE). According to NSE index, SRTM-DEM can be used for watershed delineation and parameterization with 87% similarity with Topo-DEM in a complex and underdeveloped terrains. Primary TRMM (V6) data was used as satellite based hytograph for rainfall-runoff simulation. The SCS-CN approach was used for losses and kinematic routing method employed for hydrograph transformation through the reaches. It is concluded that TRMM estimates do not give adequate information about the storms as it can be drawn from the rain gauges. Event-based flood modeling using HEC-HMS proved that SRTM elevation dataset has the ability to obviate the lack of terrain data for hydrologic modeling where appropriate data for terrain modeling and simulation of hydrological processes is unavailable. However, TRMM precipitation estimates failed to explain the behavior of rainfall events and its resultant peak discharge and time of peak.

Analysis of errors introduced by geographic coordinate systems on weather numeric prediction modeling

DOE Office of Scientific and Technical Information (OSTI.GOV)

Cao, Yanni; Cervone, Guido; Barkley, Zachary

Most atmospheric models, including the Weather Research and Forecasting (WRF) model, use a spherical geographic coordinate system to internally represent input data and perform computations. However, most geographic information system (GIS) input data used by the models are based on a spheroid datum because it better represents the actual geometry of the earth. WRF and other atmospheric models use these GIS input layers as if they were in a spherical coordinate system without accounting for the difference in datum. When GIS layers are not properly reprojected, latitudinal errors of up to 21 km in the midlatitudes are introduced. Recent studiesmore » have suggested that for very high-resolution applications, the difference in datum in the GIS input data (e.g., terrain land use, orography) should be taken into account. However, the magnitude of errors introduced by the difference in coordinate systems remains unclear. This research quantifies the effect of using a spherical vs. a spheroid datum for the input GIS layers used by WRF to study greenhouse gas transport and dispersion in northeast Pennsylvania.« less

Analysis of errors introduced by geographic coordinate systems on weather numeric prediction modeling

DOE PAGES

Cao, Yanni; Cervone, Guido; Barkley, Zachary; ...

2017-09-19

Most atmospheric models, including the Weather Research and Forecasting (WRF) model, use a spherical geographic coordinate system to internally represent input data and perform computations. However, most geographic information system (GIS) input data used by the models are based on a spheroid datum because it better represents the actual geometry of the earth. WRF and other atmospheric models use these GIS input layers as if they were in a spherical coordinate system without accounting for the difference in datum. When GIS layers are not properly reprojected, latitudinal errors of up to 21 km in the midlatitudes are introduced. Recent studiesmore » have suggested that for very high-resolution applications, the difference in datum in the GIS input data (e.g., terrain land use, orography) should be taken into account. However, the magnitude of errors introduced by the difference in coordinate systems remains unclear. This research quantifies the effect of using a spherical vs. a spheroid datum for the input GIS layers used by WRF to study greenhouse gas transport and dispersion in northeast Pennsylvania.« less

Analysis of errors introduced by geographic coordinate systems on weather numeric prediction modeling

NASA Astrophysics Data System (ADS)

Cao, Yanni; Cervone, Guido; Barkley, Zachary; Lauvaux, Thomas; Deng, Aijun; Taylor, Alan

2017-09-01

Most atmospheric models, including the Weather Research and Forecasting (WRF) model, use a spherical geographic coordinate system to internally represent input data and perform computations. However, most geographic information system (GIS) input data used by the models are based on a spheroid datum because it better represents the actual geometry of the earth. WRF and other atmospheric models use these GIS input layers as if they were in a spherical coordinate system without accounting for the difference in datum. When GIS layers are not properly reprojected, latitudinal errors of up to 21 km in the midlatitudes are introduced. Recent studies have suggested that for very high-resolution applications, the difference in datum in the GIS input data (e.g., terrain land use, orography) should be taken into account. However, the magnitude of errors introduced by the difference in coordinate systems remains unclear. This research quantifies the effect of using a spherical vs. a spheroid datum for the input GIS layers used by WRF to study greenhouse gas transport and dispersion in northeast Pennsylvania.

Using Participatory Methods and Geographic Information Systems (GIS) to Prepare for an HIV Community-Based Trial in Vulindlela, South Africa (Project Accept-HPTN 043)

ERIC Educational Resources Information Center

Chirowodza, Admire; van Rooyen, Heidi; Joseph, Philip; Sikotoyi, Sindisiwe; Richter, Linda; Coates, Thomas

2009-01-01

Recent attempts to integrate geographic information systems (GIS) and participatory techniques, have given rise to terminologies such as "participatory GIS" and "community-integrated GIS". Although GIS was initially developed for physical geographic application, it can be used for the management and analysis of health and…

The academic success of GIS in geography: Problems and prospects

NASA Astrophysics Data System (ADS)

Longley, Paul A.

The success of GIS has in some ways proved to be a mixed blessing to academic geography. While quantitative geography has developed as a disciplinary specialism over a long period of time, the infusion of GIS has been more rapid and applications-led. Geography has been a consumer, not producer, of mainstream GIS software, and as such GIS may even contribute towards accelerated de-skilling of the discipline. The technology nevertheless provides a crucial means of dealing with the current proliferation of digital data, and has important implications for the future development of geography.

75 FR 54627 - ICLUS v1.3 User's Manual: ArcGIS Tools and Datasets for Modeling U.S. Housing Density Growth

Federal Register 2010, 2011, 2012, 2013, 2014

2010-09-08

... Climate and Land Use Scenarios, a project which is described in the 2009 EPA Report, ``Land-Use Scenarios: National-Scale Housing- Density Scenarios Consistent with Climate Change Storylines.'' These scenarios are... economic development, which are used by climate change modelers to develop projections of future climate...

Comparison of perceived and modelled geographical access to accident and emergency departments: a cross-sectional analysis from the Caerphilly Health and Social Needs Study.

PubMed

Fone, David L; Christie, Stephen; Lester, Nathan

2006-04-13

Assessment of the spatial accessibility of hospital accident and emergency departments as perceived by local residents has not previously been investigated. Perceived accessibility may affect where, when, and whether potential patients attend for treatment. Using data on 11,853 respondents to a population survey in Caerphilly county borough, Wales, UK, we present an analysis comparing the accessibility of accident and emergency departments as reported by local residents and drive-time to the nearest accident and emergency department modelled using a geographical information system (GIS). Median drive-times were significantly shorter in the lowest perceived access category and longer in the best perceived access category (p < 0.001). The perceived access and GIS modelled drive-time variables were positively correlated (Spearman's rank correlation coefficient, r = 0.38, p < 0.01). The strongest correlation was found for respondents living in areas in which nearly all households had a car or van (r = 0.47, p < 0.01). Correlations were stronger among respondents reporting good access to public transport and among those reporting a recent accident and emergency attendance for injury treatment compared to other respondents. Correlation coefficients did not vary substantially by levels of household income. Drive-time, road distance and straight-line distance were highly inter-correlated and substituting road distance or straight-line distance as the GIS modelled spatial accessibility measure only marginally decreased the magnitude of the correlations between perceived and GIS modelled access. This study provides evidence that the accessibility of hospital-based health care services as perceived by local residents is related to measures of spatial accessibility modelled using GIS. For studies that aim to model geographical separation in a way that correlates well with the perception of local residents, there may be minimal advantage in using sophisticated measures. Straight-line distance, which can be calculated without GIS, may be as good as GIS-modelled drive-time or distance for this purpose. These findings will be of importance to health policy makers and local planners who seek to obtain local information on access to services through focussed assessments of residents' concerns over accessibility and GIS modelling.

Use of a GIS-based hybrid artificial neural network to prioritize the order of pipe replacement in a water distribution network.

PubMed

Ho, Cheng-I; Lin, Min-Der; Lo, Shang-Lien

2010-07-01

A methodology based on the integration of a seismic-based artificial neural network (ANN) model and a geographic information system (GIS) to assess water leakage and to prioritize pipeline replacement is developed in this work. Qualified pipeline break-event data derived from the Taiwan Water Corporation Pipeline Leakage Repair Management System were analyzed. "Pipe diameter," "pipe material," and "the number of magnitude-3( + ) earthquakes" were employed as the input factors of ANN, while "the number of monthly breaks" was used for the prediction output. This study is the first attempt to manipulate earthquake data in the break-event ANN prediction model. Spatial distribution of the pipeline break-event data was analyzed and visualized by GIS. Through this, the users can swiftly figure out the hotspots of the leakage areas. A northeastern township in Taiwan, frequently affected by earthquakes, is chosen as the case study. Compared to the traditional processes for determining the priorities of pipeline replacement, the methodology developed is more effective and efficient. Likewise, the methodology can overcome the difficulty of prioritizing pipeline replacement even in situations where the break-event records are unavailable.

Towards Automatic Processing of Virtual City Models for Simulations

NASA Astrophysics Data System (ADS)

Piepereit, R.; Schilling, A.; Alam, N.; Wewetzer, M.; Pries, M.; Coors, V.

2016-10-01

Especially in the field of numerical simulations, such as flow and acoustic simulations, the interest in using virtual 3D models to optimize urban systems is increasing. The few instances in which simulations were already carried out in practice have been associated with an extremely high manual and therefore uneconomical effort for the processing of models. Using different ways of capturing models in Geographic Information System (GIS) and Computer Aided Engineering (CAE), increases the already very high complexity of the processing. To obtain virtual 3D models suitable for simulation, we developed a tool for automatic processing with the goal to establish ties between the world of GIS and CAE. In this paper we introduce a way to use Coons surfaces for the automatic processing of building models in LoD2, and investigate ways to simplify LoD3 models in order to reduce unnecessary information for a numerical simulation.

A flexible tool for hydraulic and water quality performance analysis of green infrastructure

NASA Astrophysics Data System (ADS)

Massoudieh, A.; Alikhani, J.

2017-12-01

Models that allow for design considerations of green infrastructure (GI) practices to control stormwater runoff and associated contaminants have received considerable attention in recent years. To be used to evaluate the effect design configurations on the long-term performance of GIs, models should be able to consider processes within GIs with good fidelity. In this presentation, a sophisticated, yet flexible tool for hydraulic and water quality assessment of GIs will be introduced. The tool can be used by design engineers and researchers to capture and explore the effect of design factors and properties of the media employed in the performance of GI systems at a relatively small scale. We deemed it essential to have a flexible GI modeling tool that is capable of simulating GI system components and specific biogeochemical processes affecting contaminants such as evapotranspiration, plant uptake, reactions, and particle-associated transport accurately while maintaining a high degree of flexibility to account for the myriad of GI alternatives. The mathematical framework for a stand-alone GI performance assessment tool has been developed and will be demonstrated. The process-based model framework developed here can be used to model a diverse range of GI practices such as stormwater ponds, green roofs, retention ponds, bioretention systems, infiltration trench, permeable pavement and other custom-designed combinatory systems. An example of the application of the system to evaluate the performance of a rain-garden system will be demonstrated.

Online Hydrologic Impact Assessment Decision Support System using Internet and Web-GIS Capability

NASA Astrophysics Data System (ADS)

Choi, J.; Engel, B. A.; Harbor, J.

2002-05-01

Urban sprawl and the corresponding land use change from lower intensity uses, such as agriculture and forests, to higher intensity uses including high density residential and commercial has various long- and short-term environment impacts on ground water recharge, water pollution, and storm water drainage. A web-based Spatial Decision Support System, SDSS, for Web-based operation of long-term hydrologic impact modeling and analysis was developed. The system combines a hydrologic model, databases, web-GIS capability and HTML user interfaces to create a comprehensive hydrologic analysis system. The hydrologic model estimates daily direct runoff using the NRCS Curve Number technique and annual nonpoint source pollution loading by an event mean concentration approach. This is supported by a rainfall database with over 30 years of daily rainfall for the continental US. A web-GIS interface and a robust Web-based watershed delineation capability were developed to simplify the spatial data preparation task that is often a barrier to hydrologic model operation. The web-GIS supports browsing of map layers including hydrologic soil groups, roads, counties, streams, lakes and railroads, as well as on-line watershed delineation for any geographic point the user selects with a simple mouse click. The watershed delineation results can also be used to generate data for the hydrologic and water quality models available in the DSS. This system is already being used by city and local government planners for hydrologic impact evaluation of land use change from urbanization, and can be found at http://pasture.ecn.purdue.edu/~watergen/hymaps. This system can assist local community, city and watershed planners, and even professionals when they are examining impacts of land use change on water resources. They can estimate the hydrologic impact of possible land use changes using this system with readily available data supported through the Internet. This system provides a cost effective approach to serve potential users who require easy-to-use tools.

Study on GIS-based sport-games information system

NASA Astrophysics Data System (ADS)

Peng, Hongzhi; Yang, Lingbin; Deng, Meirong; Han, Yongshun

2008-10-01

With the development of internet and such info-technologies as, Information Superhighway, Computer Technology, Remote Sensing(RS), Global Positioning System(GPS), Digital Communication and National Information Network(NIN),etc. Geographic Information System (GIS) becomes more and more popular in fields of science and industries. It is not only feasible but also necessary to apply GIS to large-scale sport games. This paper firstly discussed GIS technology and its application, then elaborated on the frame and content of Sport-Games Geography Information System(SG-GIS) with the function of gathering, storing, processing, sharing, exchanging and utilizing all kind of spatial-temporal information about sport games, and lastly designed and developed a public service GIS for the 6th Asian Winter Games in Changchun, China(CAWGIS). The application of CAWGIS showed that the established SG-GIS was feasible and GIS-based sport games information system was able to effectively process a large amount of sport-games information and provide the real-time sport games service for governors, athletes and the public.

A Study on Effect of Concrete Foundations on Resistance and Surface Potentials of Gas Insulated Substation Grounding Systems

NASA Astrophysics Data System (ADS)

Rao, Mandava Mohana

2017-10-01

Ground resistance of high voltage substations must be as low as possible for safe grounding of their equipment both during normal and fault conditions. However, in gas insulated substations (GIS), even though resistance is low, it does not ensure the step and touch potentials of the grounding system within permissible levels. In the present study, an analytical model has been developed to calculate ground resistance, step and touch potentials of a grounding system used for GIS. Different models have been proposed for the evaluation of number of grounding rods to be inserted in to the ground. The effect of concrete foundations on above performance parameters has been analyzed by considering various fault currents, soil/earth resistivities and number of grounding rods. Finally, design optimization of GIS grounding system has been reported for fault currents in the order of 63 kA located in earth resistivity of 100Ω-m and above.

Building Construction Progress Monitoring Using Unmanned Aerial System (uas), Low-Cost Photogrammetry, and Geographic Information System (gis)

NASA Astrophysics Data System (ADS)

Bognot, J. R.; Candido, C. G.; Blanco, A. C.; Montelibano, J. R. Y.

2018-05-01

Monitoring the progress of building's construction is critical in construction management. However, measuring the building construction's progress are still manual, time consuming, error prone, and impose tedious process of analysis leading to delays, additional costings and effort. The main goal of this research is to develop a methodology for building construction progress monitoring based on 3D as-built model of the building from unmanned aerial system (UAS) images, 4D as-planned model (with construction schedule integrated) and, GIS analysis. Monitoring was done by capturing videos of the building with a camera-equipped UAS. Still images were extracted, filtered, bundle-adjusted, and 3D as-built model was generated using open source photogrammetric software. The as-planned model was generated from digitized CAD drawings using GIS. The 3D as-built model was aligned with the 4D as-planned model of building formed from extrusion of building elements, and integration of the construction's planned schedule. The construction progress is visualized via color-coding the building elements in the 3D model. The developed methodology was conducted and applied from the data obtained from an actual construction site. Accuracy in detecting `built' or `not built' building elements ranges from 82-84 % and precision of 50-72 %. Quantified progress in terms of the number of building elements are 21.31% (November 2016), 26.84 % (January 2017) and 44.19 % (March 2017). The results can be used as an input for progress monitoring performance of construction projects and improving related decision-making process.

Interactions and feedbacks among phytobenthos, hydrodynamics, nutrient cycling and sediment transport in estuarine ecosystems

NASA Astrophysics Data System (ADS)

Bergamasco, A.; De Nat, L.; Flindt, M. R.; Amos, C. L.

2003-11-01

Phytobenthic communities can play an active role in modifying the environmental characteristics of the ecosystem in which they live so mediating the human impact on Coastal Zone habitats. Complicated feedbacks couple the establishment of phytobenthic communities with water quality and physical parameters in estuaries. Direct and indirect interactions between physical and biological attributes need to be considered in order to improve the management of these ecosystems to guarantee a sustainable use of coastal resources. Within the project F-ECTS ("Feedbacks of Estuarine Circulation and Transport of Sediments on phytobenthos") this issue was approached through a three-step strategy: (i) Monitoring: detailed fieldwork activities focusing on the measurement and evaluation of the main processes involving hydrodynamics, sediments, nutrients, light and phytobenthic biomass; (ii) Modeling: joint modeling of the suspended particulate matter erosion/transport/deposition and biological mediation of the hydrodynamics and (iii) GIS: development of GIS-based practical tools able to manage and exploit measured and modeled data on the basis of scientific investigation guidelines and procedures. The overall strategy is described by illustrating results of field measurements, providing details of model implementation and demonstrating the GIS-based tools.

How well do modelled routes to school record the environments children are exposed to?: a cross-sectional comparison of GIS-modelled and GPS-measured routes to school

PubMed Central

2014-01-01

Background The school journey may make an important contribution to children’s physical activity and provide exposure to food and physical activity environments. Typically, Geographic Information Systems (GIS) have been used to model assumed routes to school in studies, but these may differ from those actually chosen. We aimed to identify the characteristics of children and their environments that make the modelled route more or less representative of that actually taken. We compared modelled GIS routes and actual Global Positioning Systems (GPS) measured routes in a free-living sample of children using varying travel modes. Methods Participants were 175 13-14 yr old children taking part in the Sport, Physical activity and Eating behaviour: Environmental Determinants in Young people (SPEEDY) study who wore GPS units for up to 7 days. Actual routes to/from school were extracted from GPS data, and shortest routes between home and school along a road network were modelled in a GIS. Differences between them were assessed according to length, percentage overlap, and food outlet exposure using multilevel regression models. Results GIS routes underestimated route length by 21.0% overall, ranging from 6.1% among walkers to 23.2% for bus users. Among pedestrians food outlet exposure was overestimated by GIS routes by 25.4%. Certain characteristics of children and their neighbourhoods that improved the concordance between GIS and GPS route length and overlap were identified. Living in a village raised the odds of increased differences in length (odds ratio (OR) 3.36 (1.32-8.58)), while attending a more urban school raised the odds of increased percentage overlap (OR 3.98 (1.49-10.63)). However none were found for food outlet exposure. Journeys home from school increased the difference between GIS and GPS routes in terms of food outlet exposure, and this measure showed considerable within-person variation. Conclusions GIS modelled routes between home and school were not truly representative of accurate GPS measured exposure to obesogenic environments, particularly for pedestrians. While route length may be fairly well described, especially for urban populations, those living close to school, and those travelling by foot, the additional expense of acquiring GPS data seems important when assessing exposure to route environments. PMID:24529075

How well do modelled routes to school record the environments children are exposed to? A cross-sectional comparison of GIS-modelled and GPS-measured routes to school.

PubMed

Harrison, Flo; Burgoine, Thomas; Corder, Kirsten; van Sluijs, Esther M F; Jones, Andy

2014-02-14

The school journey may make an important contribution to children's physical activity and provide exposure to food and physical activity environments. Typically, Geographic Information Systems (GIS) have been used to model assumed routes to school in studies, but these may differ from those actually chosen. We aimed to identify the characteristics of children and their environments that make the modelled route more or less representative of that actually taken. We compared modelled GIS routes and actual Global Positioning Systems (GPS) measured routes in a free-living sample of children using varying travel modes. Participants were 175 13-14 yr old children taking part in the Sport, Physical activity and Eating behaviour: Environmental Determinants in Young people (SPEEDY) study who wore GPS units for up to 7 days. Actual routes to/from school were extracted from GPS data, and shortest routes between home and school along a road network were modelled in a GIS. Differences between them were assessed according to length, percentage overlap, and food outlet exposure using multilevel regression models. GIS routes underestimated route length by 21.0% overall, ranging from 6.1% among walkers to 23.2% for bus users. Among pedestrians food outlet exposure was overestimated by GIS routes by 25.4%. Certain characteristics of children and their neighbourhoods that improved the concordance between GIS and GPS route length and overlap were identified. Living in a village raised the odds of increased differences in length (odds ratio (OR) 3.36 (1.32-8.58)), while attending a more urban school raised the odds of increased percentage overlap (OR 3.98 (1.49-10.63)). However none were found for food outlet exposure. Journeys home from school increased the difference between GIS and GPS routes in terms of food outlet exposure, and this measure showed considerable within-person variation. GIS modelled routes between home and school were not truly representative of accurate GPS measured exposure to obesogenic environments, particularly for pedestrians. While route length may be fairly well described, especially for urban populations, those living close to school, and those travelling by foot, the additional expense of acquiring GPS data seems important when assessing exposure to route environments.

Application of Geographic Information System (GIS) to Model the Hydrocarbon Migration: Case Study from North-East Malay Basin, Malaysia

NASA Astrophysics Data System (ADS)

Rudini; Nasir Matori, Abd; Talib, Jasmi Ab; Balogun, Abdul-Lateef

2018-03-01

The purpose of this study is to model the migration of hydrocarbon using Geographic Information System (GIS). Understanding hydrocarbon migration is important since it can mean the difference between success and failure in oil and gas exploration project. The hydrocarbon migration modeling using geophysical method is still not accurate due to the limitations of available data. In recent years, GIS has emerged as a powerful tool for subsurface mapping and analysis. Recent studies have been carried out about the abilities of GIS to model hydrocarbon migration. Recent advances in GIS support the establishment and monitoring of prediction hydrocarbon migration. The concept, model, and calculation are based on the current geological situation. The spatial data of hydrocarbon reservoirs is determined by its geometry of lithology and geophysical attributes. Top of Group E horizon of north-east Malay basin was selected as the study area due to the occurrence of hydrocarbon migration. Spatial data and attributes data such as seismic data, wells log data and lithology were acquired and processed. Digital Elevation Model (DEM) was constructed from the selected horizon as a result of seismic interpretation using the Petrel software. Furthermore, DEM was processed in ArcGIS as a base map to shown hydrocarbon migration in north-east Malay Basin. Finally, all the data layers were overlaid to produce a map of hydrocarbon migration. A good data was imported to verify the model is correct.

An online planning tool for designing terrace layouts

USDA-ARS?s Scientific Manuscript database

A web-based conservation planning tool, WebTERLOC (web-based Terrace Location Program), was developed to provide multiple terrace layout options using digital elevation model (DEM) and geographic information systems (GIS). Development of a terrace system is complicated by the time-intensive manual ...

On Improving the Quality and Interpretation of Environmental Assessments using Statistical Analysis and Geographic Information Systems

NASA Astrophysics Data System (ADS)

Karuppiah, R.; Faldi, A.; Laurenzi, I.; Usadi, A.; Venkatesh, A.

2014-12-01

An increasing number of studies are focused on assessing the environmental footprint of different products and processes, especially using life cycle assessment (LCA). This work shows how combining statistical methods and Geographic Information Systems (GIS) with environmental analyses can help improve the quality of results and their interpretation. Most environmental assessments in literature yield single numbers that characterize the environmental impact of a process/product - typically global or country averages, often unchanging in time. In this work, we show how statistical analysis and GIS can help address these limitations. For example, we demonstrate a method to separately quantify uncertainty and variability in the result of LCA models using a power generation case study. This is important for rigorous comparisons between the impacts of different processes. Another challenge is lack of data that can affect the rigor of LCAs. We have developed an approach to estimate environmental impacts of incompletely characterized processes using predictive statistical models. This method is applied to estimate unreported coal power plant emissions in several world regions. There is also a general lack of spatio-temporal characterization of the results in environmental analyses. For instance, studies that focus on water usage do not put in context where and when water is withdrawn. Through the use of hydrological modeling combined with GIS, we quantify water stress on a regional and seasonal basis to understand water supply and demand risks for multiple users. Another example where it is important to consider regional dependency of impacts is when characterizing how agricultural land occupation affects biodiversity in a region. We developed a data-driven methodology used in conjuction with GIS to determine if there is a statistically significant difference between the impacts of growing different crops on different species in various biomes of the world.

Evolution of a Greenland Ice sheet Including Shelves and Regional Sea Level Variations

NASA Astrophysics Data System (ADS)

Bradley, S.; Reerink, T.; Vandewal, R.; Helsen, M.

2015-12-01

Observational evidence, including offshore moraines and marine sediment cores infer that at the Last Glacial maximum (LGM) the Greenland ice sheet (GIS) grounded out across the Davis Strait into Baffin Bay, with fast flowing ice streams extending out to the continental shelf break along the NW margin. These observations lead to a number of questions as to weather the GIS and Laurentide ice sheet (LIS) coalesced during glacial maximums, and if so, did a significant ice shelf develop across Baffin Bay and how would such a configuration impact on the relative contribution of these ice sheets to eustatic sea level (ESL). Most previous paleo ice sheet modelling simulations of the GIS recreated an ice sheet that either did not extend out onto the continental shelf or utilised a simplified marine ice parameterisation to recreate an extended GIS, and therefore did not fully include ice shelf dynamics. In this study we simulate the evolution of the GIS from 220 kyr BP to present day using IMAU-ice; a 3D thermodynamical ice sheet model which fully accounts for grounded and floating ice, calculates grounding line migration and ice shelf dynamics. There is few observational estimates of long-term (yrs) sub marine basal melting rates (mbm) for the GIS. Therefore we investigate a range of relationships to constrain the spatial and temporal parameterisation of mbm within IMAU-ice related to changes in paleo water depth, driven by changes in relative sea level and ocean temperature. We will present results of how changes in the mbm directly impacts on the ice sheet dynamics, timing and spatial extent of the GIS at the glacial maximums, but also on the rate of retreat and spatial extent at the Last interglacial (LIG) minimum. Initial results indicate that with the inclusion of ice shelf dynamics, a larger GIS is generated which is grounded out into Davis strait, up to a water depth of -750 m, but the total contribution to LIG ESL is reduced by up to 0.6 m.

Development of a 3D GIS and its application to karst areas

NASA Astrophysics Data System (ADS)

Wu, Qiang; Xu, Hua; Zhou, Wanfang

2008-05-01

There is a growing interest in modeling and analyzing karst phenomena in three dimensions. This paper integrates geology, groundwater hydrology, geographic information system (GIS), database management system (DBMS), visualization and data mining to study karst features in Huaibei, China. The 3D geo-objects retrieved from the karst area are analyzed and mapped into different abstract levels. The spatial relationships among the objects are constructed by a dual-linker. The shapes of the 3D objects and the topological models with attributes are stored and maintained in the DBMS. Spatial analysis was then used to integrate the data in the DBMS and the 3D model to form a virtual reality (VR) to provide analytical functions such as distribution analysis, correlation query, and probability assessment. The research successfully implements 3D modeling and analyses in the karst area, and meanwhile provides an efficient tool for government policy-makers to set out restrictions on water resource development in the area.

A Flash Flood Study on the Small Montaneous River Catchments in Western Romania

NASA Astrophysics Data System (ADS)

Győri, Maria-Mihaela; Haidu, Ionel; Humbert, Joël

2013-04-01

The present study focuses on flash flood modeling on several mountaneous catchments situated in Western Romania by the use of two methodologies, when rainfall and catchment characteristics are known. Hence, the Soil Conservation Service (SCS) Method and the Rational Method will be employed for the generation of the 1%, 2% and 10% historical flash flood hydrographs on the basis of data spanning from 1989-2009. The SCS Method has been applied on the three gauged catchments in the study area: Petris, Troas and Monorostia making use of the existing interconnection between GIS and the rainfall-runoff models. The DEM, soil data and land use preprocessing in GIS allowed a determination of the hydrologic parameters needed for the rainfall-runoff model, with special emphasis on determining the time of concentration, Lag time and the weighted Curve Number according to Antecedent Moisture Conditions II, adapted for the Romanian territory. HEC-HMS rainfall-runoff model (Hydrologic Engineering Center- Hydrologic Modeling System) facilitates the historical 1%, 2% and 10% flash flood hydrograph generation for the three afore mentioned watersheds. The model is calibrated against measured streamflow data from the three existing gauging stations. The results show a good match between the resulted hydrographs and the observed hydrographs under the form of the Peak Weighted Error RMS values. The hydrographs generated by surface runoff on the ungauged catchments in the area is based on an automation of a workflow in GIS, built with ArcGIS Model Builder graphical interface, as a large part of the functions needed were available as ArcGIS tools. The several components of this model calculate: the runoff depth in mm, the runoff coefficient, the travel time and finally the discharge module which is an application of the rational method, allowing the discharge computation for every cell within the catchment. The result consists of discharges for each isochrones that will be subsequently interpolated in order to obtain the hydrograph of the historical flash floods. The two methodologies employed offer the hydrologist the opportunity of computing the historical hydrographs be it on a section of the river at choice, or for every affluent within the small river basins studied, the graphical data being easily accessed both in GIS and HEC-HMS. The peak discharge values of the main rivers as well as those of their tributaries are of great importance in establishing the hydrologic hazard under the form of floodplain maps that are inexistent for the studied watersheds. Key words: flash flood modeling, ungauged catchments, GIS, HEC-HMS rainfall-runoff model. Aknowledgements This work was possible with the financial support of the Sectoral Operational Programme for Human Resources Development 2007-2013, co-financed by the European Social Fund, under the project number POSDRU/107/1.5/S/76841 with the title "Modern Doctoral Studies: Internationalization and Interdisciplinarity".

Developing Trainee Teacher Practice with Geographical Information Systems (GIS)

ERIC Educational Resources Information Center

Walshe, Nicola

2017-01-01

There is general agreement that geographical information systems (GIS) have a place within the geography classroom; they offer the potential to support geographical learning, exploring real-world problems through student-centred learning, and developing spatial thinking. Despite this, teachers often avoid engaging with GIS and research suggests…

PROMAB-GIS: A GIS based Tool for Estimating Runoff and Sediment Yield in running Waters

NASA Astrophysics Data System (ADS)

Jenewein, S.; Rinderer, M.; Ploner, A.; Sönser, T.

2003-04-01

In recent times settlements have expanded, traffic and tourist activities have increased in most alpine regions. As a consequence, on the one hand humans and goods are affected by natural hazard processes more often, while on the other hand the demand for protection by both technical constructions and planning measures carried out by public authorities is growing. This situation results in an ever stronger need of reproducibility, comparability, transparency of all methods applied in modern natural hazard management. As a contribution to a new way of coping this situation Promab-GIS Version 1.0 has been developed. Promab-Gis has been designed as a model for time- and space-dependent determination of both runoff and bedload transport in rivers of small alpine catchment areas. The estimation of the unit hydrograph relies upon the "rational formula" and the time-area curves of the watershed. The time area diagram is a graph of cumulative drainage area contributing to discharge at the watershed outlet within a specified time of travel. The sediment yield is estimated for each cell of the channel network by determining the actual process type (erosion, transport or accumulation). Two types of transport processes are considered, sediment transport and debris flows. All functions of Promab-GIS are integrated in the graphical user interface of ArcView as pull-up menus and tool buttons. Hence the application of Promab-GIS does not rely on a sophisticated knowledge of GIS in general, respectively the ArcView software. However, despite the use of computer assistance, Promab-GIS still is an expert support system. In order to obtain plausible results, the users must be familiar with all the relevant processes controlling runoff and sediment yield in torrent catchments.

River analysis and floodplain modeling using HEC-GeoRAS/RAS, GIS and ArcGIS: a case study for the Salinas River

NASA Astrophysics Data System (ADS)

Mishra, P. K.; Bernini Campos, H. E.

2016-12-01

The lower portion of the Salinas River in Monterey bay, California has a history of flood, lots of study has been made ab out the water quality since the river provides water for the crops around, but is still in need a detailed study about the river behavior and flood analysis. The floods did significant damage, affecting valuable landing farms, residences and businesses in Monterey County. The first step for this study is comprehend and collect the river bathymetry and surroundings and then analyze the discharge and how it is going to change with time. This thesis develops a model about the specific site, recruiting real data from GIS and performing a flow simulation according to flow data provided by USGS, to verify water surface elevation and floodplain. The ArcMap, developed by ESRI, was used along with an extension (HEC-GeoRAS) because it was indeed the most appropriate model to work with the Digital Elevation Model, develop the floodplain and characterizing the land surface accurately in the study site. The HEC-RAS software, developed by US Army Corp of Engineers, was used to compute one-dimension steady flow and two-dimension unsteady flow, providing flow velocity, water surface elevation and profiles, total surface area, head and friction loss and other characteristics, allowing the analysis of the flow. A mean discharge, a mean peak streamflow and a peak discharge were used for the steady flow and a Hydrograph was used for the unsteady flow, both are based on the 1995 flood and discharge history. This study provides important information about water surface elevation and water flow, allowing stakeholders and the government to analyze solutions to avoid damage to the society and landowners.

Reservoir Characterization using geostatistical and numerical modeling in GIS with noble gas geochemistry

NASA Astrophysics Data System (ADS)

Vasquez, D. A.; Swift, J. N.; Tan, S.; Darrah, T. H.

2013-12-01

The integration of precise geochemical analyses with quantitative engineering modeling into an interactive GIS system allows for a sophisticated and efficient method of reservoir engineering and characterization. Geographic Information Systems (GIS) is utilized as an advanced technique for oil field reservoir analysis by combining field engineering and geological/geochemical spatial datasets with the available systematic modeling and mapping methods to integrate the information into a spatially correlated first-hand approach in defining surface and subsurface characteristics. Three key methods of analysis include: 1) Geostatistical modeling to create a static and volumetric 3-dimensional representation of the geological body, 2) Numerical modeling to develop a dynamic and interactive 2-dimensional model of fluid flow across the reservoir and 3) Noble gas geochemistry to further define the physical conditions, components and history of the geologic system. Results thus far include using engineering algorithms for interpolating electrical well log properties across the field (spontaneous potential, resistivity) yielding a highly accurate and high-resolution 3D model of rock properties. Results so far also include using numerical finite difference methods (crank-nicholson) to solve for equations describing the distribution of pressure across field yielding a 2D simulation model of fluid flow across reservoir. Ongoing noble gas geochemistry results will also include determination of the source, thermal maturity and the extent/style of fluid migration (connectivity, continuity and directionality). Future work will include developing an inverse engineering algorithm to model for permeability, porosity and water saturation.This combination of new and efficient technological and analytical capabilities is geared to provide a better understanding of the field geology and hydrocarbon dynamics system with applications to determine the presence of hydrocarbon pay zones (or other reserves) and improve oil field management (e.g. perforating, drilling, EOR and reserves estimation)

Road Traffic Accident Analysis of Ajmer City Using Remote Sensing and GIS Technology

NASA Astrophysics Data System (ADS)

Bhalla, P.; Tripathi, S.; Palria, S.

2014-12-01

With advancement in technology, new and sophisticated models of vehicle are available and their numbers are increasing day by day. A traffic accident has multi-facet characteristics associated with it. In India 93% of crashes occur due to Human induced factor (wholly or partly). For proper traffic accident analysis use of GIS technology has become an inevitable tool. The traditional accident database is a summary spreadsheet format using codes and mileposts to denote location, type and severity of accidents. Geo-referenced accident database is location-referenced. It incorporates a GIS graphical interface with the accident information to allow for query searches on various accident attributes. Ajmer city, headquarter of Ajmer district, Rajasthan has been selected as the study area. According to Police records, 1531 accidents occur during 2009-2013. Maximum accident occurs in 2009 and the maximum death in 2013. Cars, jeeps, auto, pickup and tempo are mostly responsible for accidents and that the occurrence of accidents is mostly concentrated between 4PM to 10PM. GIS has proved to be a good tool for analyzing multifaceted nature of accidents. While road safety is a critical issue, yet it is handled in an adhoc manner. This Study is a demonstration of application of GIS for developing an efficient database on road accidents taking Ajmer City as a study. If such type of database is developed for other cities, a proper analysis of accidents can be undertaken and suitable management strategies for traffic regulation can be successfully proposed.

Modeling of Aerosol Vertical Profiles Using GIS and Remote Sensing

PubMed Central

Wong, Man Sing; Nichol, Janet E.; Lee, Kwon Ho

2009-01-01

The use of Geographic Information Systems (GIS) and Remote Sensing (RS) by climatologists, environmentalists and urban planners for three dimensional modeling and visualization of the landscape is well established. However no previous study has implemented these techniques for 3D modeling of atmospheric aerosols because air quality data is traditionally measured at ground points, or from satellite images, with no vertical dimension. This study presents a prototype for modeling and visualizing aerosol vertical profiles over a 3D urban landscape in Hong Kong. The method uses a newly developed technique for the derivation of aerosol vertical profiles from AERONET sunphotometer measurements and surface visibility data, and links these to a 3D urban model. This permits automated modeling and visualization of aerosol concentrations at different atmospheric levels over the urban landscape in near-real time. Since the GIS platform permits presentation of the aerosol vertical distribution in 3D, it can be related to the built environment of the city. Examples are given of the applications of the model, including diagnosis of the relative contribution of vehicle emissions to pollution levels in the city, based on increased near-surface concentrations around weekday rush-hour times. The ability to model changes in air quality and visibility from ground level to the top of tall buildings is also demonstrated, and this has implications for energy use and environmental policies for the tall mega-cities of the future. PMID:22408531

Modeling of Aerosol Vertical Profiles Using GIS and Remote Sensing.

PubMed

Wong, Man Sing; Nichol, Janet E; Lee, Kwon Ho

2009-01-01

The use of Geographic Information Systems (GIS) and Remote Sensing (RS) by climatologists, environmentalists and urban planners for three dimensional modeling and visualization of the landscape is well established. However no previous study has implemented these techniques for 3D modeling of atmospheric aerosols because air quality data is traditionally measured at ground points, or from satellite images, with no vertical dimension. This study presents a prototype for modeling and visualizing aerosol vertical profiles over a 3D urban landscape in Hong Kong. The method uses a newly developed technique for the derivation of aerosol vertical profiles from AERONET sunphotometer measurements and surface visibility data, and links these to a 3D urban model. This permits automated modeling and visualization of aerosol concentrations at different atmospheric levels over the urban landscape in near-real time. Since the GIS platform permits presentation of the aerosol vertical distribution in 3D, it can be related to the built environment of the city. Examples are given of the applications of the model, including diagnosis of the relative contribution of vehicle emissions to pollution levels in the city, based on increased near-surface concentrations around weekday rush-hour times. The ability to model changes in air quality and visibility from ground level to the top of tall buildings is also demonstrated, and this has implications for energy use and environmental policies for the tall mega-cities of the future.

Modelling of light pollution in suburban areas using remotely sensed imagery and GIS.

PubMed

Chalkias, C; Petrakis, M; Psiloglou, B; Lianou, M

2006-04-01

This paper describes a methodology for modelling light pollution using geographical information systems (GIS) and remote sensing (RS) technology. The proposed approach attempts to address the issue of environmental assessment in sensitive suburban areas. The modern way of life in developing countries is conductive to environmental degradation in urban and suburban areas. One specific parameter for this degradation is light pollution due to intense artificial night lighting. This paper aims to assess this parameter for the Athens metropolitan area, using modern analytical and data capturing technologies. For this purpose, night-time satellite images and analogue maps have been used in order to create the spatial database of the GIS for the study area. Using GIS advanced analytical functionality, visibility analysis was implemented. The outputs for this analysis are a series of maps reflecting direct and indirect light pollution around the city of Athens. Direct light pollution corresponds to optical contact with artificial night light sources, while indirect light pollution corresponds to optical contact with the sky glow above the city. Additionally, the assessment of light pollution in different periods allows for dynamic evaluation of the phenomenon. The case study demonstrates high levels of light pollution in Athens suburban areas and its increase over the last decade.

Renewable Energy Deployment in Colorado and the West: A Modeling Sensitivity and GIS Analysis

DOE Office of Scientific and Technical Information (OSTI.GOV)

Barrows, Clayton; Mai, Trieu; Haase, Scott

2016-03-01

The Resource Planning Model is a capacity expansion model designed for a regional power system, such as a utility service territory, state, or balancing authority. We apply a geospatial analysis to Resource Planning Model renewable energy capacity expansion results to understand the likelihood of renewable development on various lands within Colorado.

Open Source GIS Connectors to NASA GES DISC Satellite Data

NASA Technical Reports Server (NTRS)

Kempler, Steve; Pham, Long; Yang, Wenli

2014-01-01

The NASA Goddard Earth Sciences Data and Information Services Center (GES DISC) houses a suite of high spatiotemporal resolution GIS data including satellite-derived and modeled precipitation, air quality, and land surface parameter data. The data are valuable to various GIS research and applications at regional, continental, and global scales. On the other hand, many GIS users, especially those from the ArcGIS community, have difficulties in obtaining, importing, and using our data due to factors such as the variety of data products, the complexity of satellite remote sensing data, and the data encoding formats. We introduce a simple open source ArcGIS data connector that significantly simplifies the access and use of GES DISC data in ArcGIS.

Linking environmental effects to health impacts: a computer modelling approach for air pollution

PubMed Central

Mindell, J.; Barrowcliffe, R.

2005-01-01

Study objective and Setting: To develop a computer model, using a geographical information system (GIS), to quantify potential health effects of air pollution from a new energy from waste facility on the surrounding urban population. Design: Health impacts were included where evidence of causality is sufficiently convincing. The evidence for no threshold means that annual average increases in concentration can be used to model changes in outcome. The study combined the "contours" of additional pollutant concentrations for the new source generated by a dispersion model with a population database within a GIS, which is set up to calculate the product of the concentration increase with numbers of people exposed within each enumeration district exposure response coefficients, and the background rates of mortality and hospital admissions for several causes. Main results: The magnitude of health effects might result from the increased PM10 exposure is small—about 0.03 deaths each year in a population of 3 500 000, with 0.04 extra hospital admissions for respiratory disease. Long term exposure might bring forward 1.8–7.8 deaths in 30 years. Conclusions: This computer model is a feasible approach to estimating impacts on human health from environmental effects but sensitivity analyses are recommended. Relevance to clinical or professional practice: The availability of GIS and dispersion models on personal computers enables quantification of health effects resulting from the additional air pollution new industrial development might cause. This approach could also be used in environmental impact assessment. Care must be taken in presenting results to emphasise methodological limitations and uncertainties in the numbers. PMID:16286501

ArcNLET: A GIS-based software to simulate groundwater nitrate load from septic systems to surface water bodies

NASA Astrophysics Data System (ADS)

Rios, J. Fernando; Ye, Ming; Wang, Liying; Lee, Paul Z.; Davis, Hal; Hicks, Rick

2013-03-01

Onsite wastewater treatment systems (OWTS), or septic systems, can be a significant source of nitrates in groundwater and surface water. The adverse effects that nitrates have on human and environmental health have given rise to the need to estimate the actual or potential level of nitrate contamination. With the goal of reducing data collection and preparation costs, and decreasing the time required to produce an estimate compared to complex nitrate modeling tools, we developed the ArcGIS-based Nitrate Load Estimation Toolkit (ArcNLET) software. Leveraging the power of geographic information systems (GIS), ArcNLET is an easy-to-use software capable of simulating nitrate transport in groundwater and estimating long-term nitrate loads from groundwater to surface water bodies. Data requirements are reduced by using simplified models of groundwater flow and nitrate transport which consider nitrate attenuation mechanisms (subsurface dispersion and denitrification) as well as spatial variability in the hydraulic parameters and septic tank distribution. ArcNLET provides a spatial distribution of nitrate plumes from multiple septic systems and a load estimate to water bodies. ArcNLET's conceptual model is divided into three sub-models: a groundwater flow model, a nitrate transport and fate model, and a load estimation model which are implemented as an extension to ArcGIS. The groundwater flow model uses a map of topography in order to generate a steady-state approximation of the water table. In a validation study, this approximation was found to correlate well with a water table produced by a calibrated numerical model although it was found that the degree to which the water table resembles the topography can vary greatly across the modeling domain. The transport model uses a semi-analytical solution to estimate the distribution of nitrate within groundwater, which is then used to estimate a nitrate load using a mass balance argument. The estimates given by ArcNLET are suitable for a screening-level analysis.

CampusGIS of the University of Cologne: a tool for orientation, navigation, and management

NASA Astrophysics Data System (ADS)

Baaser, U.; Gnyp, M. L.; Hennig, S.; Hoffmeister, D.; Köhn, N.; Laudien, R.; Bareth, G.

2006-10-01

The working group for GIS and Remote Sensing at the Department of Geography at the University of Cologne has established a WebGIS called CampusGIS of the University of Cologne. The overall task of the CampusGIS is the connection of several existing databases at the University of Cologne with spatial data. These existing databases comprise data about staff, buildings, rooms, lectures, and general infrastructure like bus stops etc. These information were yet not linked to their spatial relation. Therefore, a GIS-based method is developed to link all the different databases to spatial entities. Due to the philosophy of the CampusGIS, an online-GUI is programmed which enables users to search for staff, buildings, or institutions. The query results are linked to the GIS database which allows the visualization of the spatial location of the searched entity. This system was established in 2005 and is operational since early 2006. In this contribution, the focus is on further developments. First results of (i) including routing services in, (ii) programming GUIs for mobile devices for, and (iii) including infrastructure management tools in the CampusGIS are presented. Consequently, the CampusGIS is not only available for spatial information retrieval and orientation. It also serves for on-campus navigation and administrative management.

Development of AHPDST Vulnerability Indexing Model for Groundwater Vulnerability Assessment Using Hydrogeophysical Derived Parameters and GIS Application

NASA Astrophysics Data System (ADS)

Mogaji, K. A.

2017-04-01

Producing a bias-free vulnerability assessment map model is significantly needed for planning a scheme of groundwater quality protection. This study developed a GIS-based AHPDST vulnerability index model for producing groundwater vulnerability model map in the hard rock terrain, Nigeria by exploiting the potentials of analytic hierarchy process (AHP) and Dempster-Shafer theory (DST) data mining models. The acquired borehole and geophysical data in the study area were processed to derive five groundwater vulnerability conditioning factors (GVCFs), namely recharge rate, aquifer transmissivity, hydraulic conductivity, transverse resistance and longitudinal conductance. The produced GVCFs' thematic maps were multi-criterially analyzed by employing the mechanisms of AHP and DST models to determine the normalized weight ( W) parameter for the GVCFs and mass function factors (MFFs) parameter for the GVCFs' thematic maps' class boundaries, respectively. Based on the application of the weighted linear average technique, the determined W and MFFs parameters were synthesized to develop groundwater vulnerability potential index (GVPI)-based AHPDST model algorithm. The developed model was applied to establish four GVPI mass/belief function indices. The estimates based on the applied GVPI belief function indices were processed in GIS environment to create prospective groundwater vulnerability potential index maps. The most representative of the resulting vulnerability maps (the GVPIBel map) was considered for producing the groundwater vulnerability potential zones (GVPZ) map for the area. The produced GVPZ map established 48 and 52% of the areal extent to be covered by the lows/moderate and highs vulnerable zones, respectively. The success and the prediction rates of the produced GVPZ map were determined using the relative operating characteristics technique to give 82.3 and 77.7%, respectively. The analyzed results reveal that the developed GVPI-based AHPDST model algorithm is capable of producing efficient groundwater vulnerability potential zones prediction map and characterizing the predicted zones uncertainty via the DST mechanism processes in the area. The produced GVPZ map in this study can be used by decision makers to formulate appropriate groundwater management strategies and the approach may be well opted in other hard rock regions of the world, especially in economically poor nations.

Information Technology Implementation and Sustainment Model: Data Collection Instrument

DTIC Science & Technology

2005-03-01

users (Wing and Bettinger , 2003). A GIS is a computerized system for spatial (geographically-referenced) data management (Davis and Schultz, 1990:3...AFIT/GEM/ENV/05M-15 Abstract The goal of this research was to develop a data collection instrument for an existing information technology...implementation and sustsinment model. In 2003, a unique system dynamics model was developed at the Air Force Institute of Technology to predict the

Modelling topographic potential for erosion and deposition using GIS

Treesearch

Helena Mitasova; Louis R. Iverson

1996-01-01

Modelling of erosion and deposition in complex terrain within a geographical information system (GIS) requires a high resolution digital elevation model (DEM), reliable estimation of topographic parameters, and formulation of erosion models adequate for digital representation of spatially distributed parameters. Regularized spline with tension was integrated within a...

Integrating TITAN2D Geophysical Mass Flow Model with GIS

NASA Astrophysics Data System (ADS)

Namikawa, L. M.; Renschler, C.

2005-12-01

TITAN2D simulates geophysical mass flows over natural terrain using depth-averaged granular flow models and requires spatially distributed parameter values to solve differential equations. Since a Geographical Information System (GIS) main task is integration and manipulation of data covering a geographic region, the use of a GIS for implementation of simulation of complex, physically-based models such as TITAN2D seems a natural choice. However, simulation of geophysical flows requires computationally intensive operations that need unique optimizations, such as adaptative grids and parallel processing. Thus GIS developed for general use cannot provide an effective environment for complex simulations and the solution is to develop a linkage between GIS and simulation model. The present work presents the solution used for TITAN2D where data structure of a GIS is accessed by simulation code through an Application Program Interface (API). GRASS is an open source GIS with published data formats thus GRASS data structure was selected. TITAN2D requires elevation, slope, curvature, and base material information at every cell to be computed. Results from simulation are visualized by a system developed to handle the large amount of output data and to support a realistic dynamic 3-D display of flow dynamics, which requires elevation and texture, usually from a remote sensor image. Data required by simulation is in raster format, using regular rectangular grids. GRASS format for regular grids is based on data file (binary file storing data either uncompressed or compressed by grid row), header file (text file, with information about georeferencing, data extents, and grid cell resolution), and support files (text files, with information about color table and categories names). The implemented API provides access to original data (elevation, base material, and texture from imagery) and slope and curvature derived from elevation data. From several existing methods to estimate slope and curvature from elevation, the selected one is based on estimation by a third-order finite difference method, which has shown to perform better or with minimal difference when compared to more computationally expensive methods. Derivatives are estimated using weighted sum of 8 grid neighbor values. The method was implemented and simulation results compared to derivatives estimated by a simplified version of the method (uses only 4 neighbor cells) and proven to perform better. TITAN2D uses an adaptative mesh grid, where resolution (grid cell size) is not constant, and visualization tools also uses texture with varying resolutions for efficient display. The API supports different resolutions applying bilinear interpolation when elevation, slope and curvature are required at a resolution higher (smaller cell size) than the original and using a nearest cell approach for elevations with lower resolution (larger) than the original. For material information nearest neighbor method is used since interpolation on categorical data has no meaning. Low fidelity characteristic of visualization allows use of nearest neighbor method for texture. Bilinear interpolation estimates the value at a point as the distance-weighted average of values at the closest four cell centers, and interpolation performance is just slightly inferior compared to more computationally expensive methods such as bicubic interpolation and kriging.

Depth data research of GIS based on clustering analysis algorithm

NASA Astrophysics Data System (ADS)

Xiong, Yan; Xu, Wenli

2018-03-01

The data of GIS have spatial distribution. Geographic data has both spatial characteristics and attribute characteristics, and also changes with time. Therefore, the amount of data is very large. Nowadays, many industries and departments in the society are using GIS. However, without proper data analysis and mining scheme, GIS will not exert its maximum effectiveness and will waste a lot of data. In this paper, we use the geographic information demand of a national security department as the experimental object, combining the characteristics of GIS data, taking into account the characteristics of time, space, attributes and so on, and using cluster analysis algorithm. We further study the mining scheme for depth data, and get the algorithm model. This algorithm can automatically classify sample data, and then carry out exploratory analysis. The research shows that the algorithm model and the information mining scheme can quickly find hidden depth information from the surface data of GIS, thus improving the efficiency of the security department. This algorithm can also be extended to other fields.

Improved alignment evaluation and optimization : final report.

DOT National Transportation Integrated Search

2007-09-11

This report outlines the development of an enhanced highway alignment evaluation and optimization : model. A GIS-based software tool is prepared for alignment optimization that uses genetic algorithms for : optimal search. The software is capable of ...

Using a Web GIS Plate Tectonics Simulation to Promote Geospatial Thinking

ERIC Educational Resources Information Center

Bodzin, Alec M.; Anastasio, David; Sharif, Rajhida; Rutzmoser, Scott

2016-01-01

Learning with Web-based geographic information system (Web GIS) can promote geospatial thinking and analysis of georeferenced data. Web GIS can enable learners to analyze rich data sets to understand spatial relationships that are managed in georeferenced data visualizations. We developed a Web GIS plate tectonics simulation as a capstone learning…

Integrating Geographic Information Systems (GIS) Applications into Business Courses Using Online Business Geographics Modules

ERIC Educational Resources Information Center

Miller, Fred; Mangold, W. Glynn; Holmes, Terry

2006-01-01

Although the value of geographic information systems (GIS) technologies is recognized by practitioners and educators alike, GIS instruction has yet to make significant inroads into business curricula. In this article, the authors discuss the constraints of integrating GIS tools into business education. They develop a prototype module for…

Integrating 3D Visualization and GIS in Planning Education

ERIC Educational Resources Information Center

Yin, Li

2010-01-01

Most GIS-related planning practices and education are currently limited to two-dimensional mapping and analysis although 3D GIS is a powerful tool to study the complex urban environment in its full spatial extent. This paper reviews current GIS and 3D visualization uses and development in planning practice and education. Current literature…

Developing a GIS for CO2 analysis using lightweight, open source components

NASA Astrophysics Data System (ADS)

Verma, R.; Goodale, C. E.; Hart, A. F.; Kulawik, S. S.; Law, E.; Osterman, G. B.; Braverman, A.; Nguyen, H. M.; Mattmann, C. A.; Crichton, D. J.; Eldering, A.; Castano, R.; Gunson, M. R.

2012-12-01

There are advantages to approaching the realm of geographic information systems (GIS) using lightweight, open source components in place of a more traditional web map service (WMS) solution. Rapid prototyping, schema-less data storage, the flexible interchange of components, and open source community support are just some of the benefits. In our effort to develop an application supporting the geospatial and temporal rendering of remote sensing carbon-dioxide (CO2) data for the CO2 Virtual Science Data Environment project, we have connected heterogeneous open source components together to form a GIS. Utilizing widely popular open source components including the schema-less database MongoDB, Leaflet interactive maps, the HighCharts JavaScript graphing library, and Python Bottle web-services, we have constructed a system for rapidly visualizing CO2 data with reduced up-front development costs. These components can be aggregated together, resulting in a configurable stack capable of replicating features provided by more standard GIS technologies. The approach we have taken is not meant to replace the more established GIS solutions, but to instead offer a rapid way to provide GIS features early in the development of an application and to offer a path towards utilizing more capable GIS technology in the future.

The research and development of water resources management information system based on ArcGIS

NASA Astrophysics Data System (ADS)

Cui, Weiqun; Gao, Xiaoli; Li, Yuzhi; Cui, Zhencai

According to that there are large amount of data, complexity of data type and format in the water resources management, we built the water resources calculation model and established the water resources management information system based on the advanced ArcGIS and Visual Studio.NET development platform. The system can integrate the spatial data and attribute data organically, and manage them uniformly. It can analyze spatial data, inquire by map and data bidirectionally, provide various charts and report forms automatically, link multimedia information, manage database etc. . So it can provide spatial and static synthetical information services for study, management and decision of water resources, regional geology and eco-environment etc..

Application research on temporal GIS in the transportation information management system

NASA Astrophysics Data System (ADS)

Wang, Wei; Qin, Qianqing; Wang, Chao

2006-10-01

The application, development and key matters of applying spatio-temporal GIS to traffic information management system are discussed in this paper by introducing the development of spatio-temporal database, current models of spatio-temporal data, traits of traffic information management system. This paper proposes a method of organizing spatio-temporal data taking road object changes into consideration, and describes its data structure in 3 aspects, including structure of spatio-temporal object, organizing method spatio-temporal data and storage means of spatio-temporal data. Trying to manage types of spatio-temporal data involved in traffic system, such as road information, river information, railway information, social and economical data, and etc, uniformly, efficiently and with low redundancy.

A pilot GIS database of active faults of Mt. Etna (Sicily): A tool for integrated hazard evaluation

NASA Astrophysics Data System (ADS)

Barreca, Giovanni; Bonforte, Alessandro; Neri, Marco

2013-02-01

A pilot GIS-based system has been implemented for the assessment and analysis of hazard related to active faults affecting the eastern and southern flanks of Mt. Etna. The system structure was developed in ArcGis® environment and consists of different thematic datasets that include spatially-referenced arc-features and associated database. Arc-type features, georeferenced into WGS84 Ellipsoid UTM zone 33 Projection, represent the five main fault systems that develop in the analysed region. The backbone of the GIS-based system is constituted by the large amount of information which was collected from the literature and then stored and properly geocoded in a digital database. This consists of thirty five alpha-numeric fields which include all fault parameters available from literature such us location, kinematics, landform, slip rate, etc. Although the system has been implemented according to the most common procedures used by GIS developer, the architecture and content of the database represent a pilot backbone for digital storing of fault parameters, providing a powerful tool in modelling hazard related to the active tectonics of Mt. Etna. The database collects, organises and shares all scientific currently available information about the active faults of the volcano. Furthermore, thanks to the strong effort spent on defining the fields of the database, the structure proposed in this paper is open to the collection of further data coming from future improvements in the knowledge of the fault systems. By layering additional user-specific geographic information and managing the proposed database (topological querying) a great diversity of hazard and vulnerability maps can be produced by the user. This is a proposal of a backbone for a comprehensive geographical database of fault systems, universally applicable to other sites.

Development and management of a geographic information system for health research in a developing-country setting: a case study from Bangladesh.

PubMed

Sugimoto, Jonathan D; Labrique, Alain B; Ahmad, Salahuddin; Rashid, Mahbubur; Klemm, Rolf D W; Christian, Parul; West, Keith P

2007-12-01

In the last decade, geographic information systems (GIS) have become accessible to researchers in developing countries, yet guidance remains sparse for developing a GIS. Drawing on experience in developing a GIS for a large community trial in rural Bangladesh, six stages for constructing, maintaining, and using a GIS for health research purposes were outlined. The system contains 0.25 million landmarks, including 150,000 houses, in an area of 435 sq km with over 650,000 people. Assuming access to reasonably accurate paper boundary maps of the intended working area and the absence of pre-existing digital local-area maps, the six stages are: to (a) digitize and update existing paper maps, (b) join the digitized maps into a large-area map, (c) reference this large-area map to a geographic coordinate system, (d) insert location landmarks of interest, (e) maintain the GIS, and (f) link it to other research databases. These basic steps can produce a household-level, updated, scaleable GIS that can both enhance field efficiency and support epidemiologic analyses of demographic patterns, diseases, and health outcomes.

Development and Management of a Geographic Information System for Health Research in a Developing-country Setting: A Case Study from Bangladesh

PubMed Central

Sugimoto, Jonathan D.; Labrique, Alain B.; Salahuddin, Ahmad; Rashid, Mahbubur; Klemm, Rolf D.W.; Christian, Parul; West, Keith P.

2007-01-01

In the last decade, geographic information systems (GIS) have become accessible to researchers in developing countries, yet guidance remains sparse for developing a GIS. Drawing on experience in developing a GIS for a large community trial in rural Bangladesh, six stages for constructing, maintaining, and using a GIS for health research purposes were outlined. The system contains 0.25 million landmarks, including 150,000 houses, in an area of 435 sq km with over 650,000 people. Assuming access to reasonably accurate paper boundary maps of the intended working area and the absence of pre-existing digital local-area maps, the six stages are: to (a) digitize and update existing paper maps, (b) join the digitized maps into a large-area map, (c) reference this large-area map to a geographic coordinate system, (d) insert location landmarks of interest, (e) maintain the GIS, and (f) link it to other research databases. These basic steps can produce a household-level, updated, scaleable GIS that can both enhance field efficiency and support epidemiologic analyses of demographic patterns, diseases, and health outcomes. PMID:18402187

GIS model for identifying urban areas vulnerable to noise pollution: case study

NASA Astrophysics Data System (ADS)

Bilaşco, Ştefan; Govor, Corina; Roşca, Sanda; Vescan, Iuliu; Filip, Sorin; Fodorean, Ioan

2017-04-01

The unprecedented expansion of the national car ownership over the last few years has been determined by economic growth and the need for the population and economic agents to reduce travel time in progressively expanding large urban centres. This has led to an increase in the level of road noise and a stronger impact on the quality of the environment. Noise pollution generated by means of transport represents one of the most important types of pollution with negative effects on a population's health in large urban areas. As a consequence, tolerable limits of sound intensity for the comfort of inhabitants have been determined worldwide and the generation of sound maps has been made compulsory in order to identify the vulnerable zones and to make recommendations how to decrease the negative impact on humans. In this context, the present study aims at presenting a GIS spatial analysis model-based methodology for identifying and mapping zones vulnerable to noise pollution. The developed GIS model is based on the analysis of all the components influencing sound propagation, represented as vector databases (points of sound intensity measurements, buildings, lands use, transport infrastructure), raster databases (DEM), and numerical databases (wind direction and speed, sound intensity). Secondly, the hourly changes (for representative hours) were analysed to identify the hotspots characterised by major traffic flows specific to rush hours. The validated results of the model are represented by GIS databases and useful maps for the local public administration to use as a source of information and in the process of making decisions.

a Spatial Analysis on Gis-Hedonic Pricing Model on the Influence of Public Open Space and House Price in Klang Valley, Malaysia

NASA Astrophysics Data System (ADS)

Zainora, A. M.; Norzailawati, M. N.; Tuminah, P.

2016-06-01

Presently, it is noticeable that there is a significant influence of public open space about house price, especially in many developed nations. Literature suggests the relationship between the two aspects give impact on the housing market, however not many studies undertaken in Malaysia. Thus, this research was initiated to analyse the relationship of open space and house price via the techniques of GIS-Hedonic Pricing Model. In this regards, the GIS tool indicates the pattern of the relationship between open space and house price spatially. Meanwhile, Hedonic Pricing Model demonstrates the index of the selected criteria in determining the housing price. This research is a perceptual study of 200 respondents who were the house owners of double-storey terrace houses in four townships, namely Bandar Baru Bangi, Taman Melawati, Subang Jaya and Shah Alam, in Klang Valley. The key research question is whether the relationship between open space and house price exists and the nature of its pattern and intensity. The findings indicate that there is a positive correlation between open space and house price. Correlation analysis reveals that a weak relationship (rs < 0.1) established between the variable of open space and house price (rs = 0.91, N = 200, p = 0.2). Consequently, the rate of house price change is rather small. In overall, this research has achieved its research aims and thus, offers the value added in applying the GIS-Hedonic pricing model in analysing the influence of open space to the house price in the form of spatially and textually.

Nation-Wide, Web-Based, Geographic Information System for the Integrated Surveillance and Control of Dengue Fever in Mexico

PubMed Central

Hernández-Ávila, Juan Eugenio; Rodríguez, Mario-Henry; Santos-Luna, René; Sánchez-Castañeda, Veronica; Román-Pérez, Susana; Ríos-Salgado, Víctor Hugo; Salas-Sarmiento, Jesús Alberto

2013-01-01

Dengue fever incidence and its geographical distribution are increasing throughout the world. Quality and timely information is essential for its prevention and control. A web based, geographically enabled, dengue integral surveillance system (Dengue-GIS) was developed for the nation-wide collection, integration, analysis and reporting of geo-referenced epidemiologic, entomologic, and control interventions data. Consensus in the design and practical operation of the system was a key factor for its acceptance. Working with information systems already implemented as a starting point facilitated its acceptance by officials and operative personnel. Dengue-GIS provides the geographical detail needed to plan, asses and evaluate the impact of control activities. The system is beginning to be adopted as a knowledge base by vector control programs. It is used to generate evidence on impact and cost-effectiveness of control activities, promoting the use of information for decision making at all levels of the vector control program. Dengue-GIS has also been used as a hypothesis generator for the academic community. This GIS-based model system for dengue surveillance and the experience gathered during its development and implementation could be useful in other dengue endemic countries and extended to other infectious or chronic diseases. PMID:23936394

A conceptual holding model for veterinary applications.

PubMed

Ferrè, Nicola; Kuhn, Werner; Rumor, Massimo; Marangon, Stefano

2014-05-01

Spatial references are required when geographical information systems (GIS) are used for the collection, storage and management of data. In the veterinary domain, the spatial component of a holding (of animals) is usually defined by coordinates, and no other relevant information needs to be interpreted or used for manipulation of the data in the GIS environment provided. Users trying to integrate or reuse spatial data organised in such a way, frequently face the problem of data incompatibility and inconsistency. The root of the problem lies in differences with respect to syntax as well as variations in the semantic, spatial and temporal representations of the geographic features. To overcome these problems and to facilitate the inter-operability of different GIS, spatial data must be defined according to a \\"schema\\" that includes the definition, acquisition, analysis, access, presentation and transfer of such data between different users and systems. We propose an application \\"schema\\" of holdings for GIS applications in the veterinary domain according to the European directive framework (directive 2007/2/EC--INSPIRE). The conceptual model put forward has been developed at two specific levels to produce the essential and the abstract model, respectively. The former establishes the conceptual linkage of the system design to the real world, while the latter describes how the system or software works. The result is an application \\"schema\\" that formalises and unifies the information-theoretic foundations of how to spatially represent a holding in order to ensure straightforward information-sharing within the veterinary community.

Strategic Enrollment Management (SEM) Decisions and Geographic Information Systems (GIS) for Community Colleges

ERIC Educational Resources Information Center

Baldin, Antoinette M.

2013-01-01

With the changing landscape in enrollment options for potential community college students, community college administrators are looking for ways to forecast enrollment by using strategic enrollment management models. Today, community colleges' administration is challenged to develop, use, and implement enrollment models that support their…

QUANTIFYING AN UNCERTAIN FUTURE: HYDROLOGIC MODEL PERFORMANCE FOR A SERIES OF REALIZED "FUTURE" CONDITIONS

EPA Science Inventory

GIS-based hydrologic modeling offers a convenient means of assessing the impacts associated with land-cover/use change for environmental planning efforts. Future scenarios can be developed through a combination of modifications to the land-cover/use maps used to parameterize hydr...

GIS-based channel flow and sediment transport simulation using CCHE1D coupled with AnnAGNPS

USDA-ARS?s Scientific Manuscript database

CCHE1D (Center for Computational Hydroscience and Engineering 1-Dimensional model) simulates unsteady free-surface flows with nonequilibrium, nonuniform sediment transport in dendritic channel networks. Since early 1990’s, the model and its software packages have been developed and continuously main...

SADA: A FREEWARE DECISION SUPPORT TOOL INTEGRATING GIS, SAMPLE DESIGN, SPATIAL MODELING AND RISK ASSESSMENT (SLIDE PRESENTATION)

EPA Science Inventory

Spatial Analysis and Decision Assistance (SADA) is a Windows freeware program that incorporates tools from environmental assessment into an effective problem-solving environment. SADA was developed by the Institute for Environmental Modeling at the University of Tennessee and inc...

MEETING IN CHICAGO: SADA: A FREEWARE DECISION SUPPORT TOOL INTEGRATING GIS, SAMPLE DESIGN, SPATIAL MODELING, AND ENVIRONMENTAL RISK ASSESSMENT

EPA Science Inventory

Spatial Analysis and Decision Assistance (SADA) is a Windows freeware program that incorporates tools from environmental assessment into an effective problem-solving environment. SADA was developed by the Institute for Environmental Modeling at the University of Tennessee and inc...

MEETING IN CZECH REPUBLIC: SADA: A FREEWARE DECISION SUPPORT TOOL INTEGRATING GIS, SAMPLE DESIGN, SPATIAL MODELING, AND RISK ASSESSMENT

EPA Science Inventory

Spatial Analysis and Decision Assistance (SADA) is a Windows freeware program that incorporates tools from environmental assessment into an effective problem-solving environment. SADA was developed by the Institute for Environmental Modeling at the University of Tennessee and inc...

Teaching Complex Concepts in the Geosciences by Integrating Analytical Reasoning with GIS

ERIC Educational Resources Information Center

Houser, Chris; Bishop, Michael P.; Lemmons, Kelly

2017-01-01

Conceptual models have long served as a means for physical geographers to organize their understanding of feedback mechanisms and complex systems. Analytical reasoning provides undergraduate students with an opportunity to develop conceptual models based upon their understanding of surface processes and environmental conditions. This study…

Interactive, open source, travel time scenario modelling: tools to facilitate participation in health service access analysis.

PubMed

Fisher, Rohan; Lassa, Jonatan

2017-04-18

Modelling travel time to services has become a common public health tool for planning service provision but the usefulness of these analyses is constrained by the availability of accurate input data and limitations inherent in the assumptions and parameterisation. This is particularly an issue in the developing world where access to basic data is limited and travel is often complex and multi-modal. Improving the accuracy and relevance in this context requires greater accessibility to, and flexibility in, travel time modelling tools to facilitate the incorporation of local knowledge and the rapid exploration of multiple travel scenarios. The aim of this work was to develop simple open source, adaptable, interactive travel time modelling tools to allow greater access to and participation in service access analysis. Described are three interconnected applications designed to reduce some of the barriers to the more wide-spread use of GIS analysis of service access and allow for complex spatial and temporal variations in service availability. These applications are an open source GIS tool-kit and two geo-simulation models. The development of these tools was guided by health service issues from a developing world context but they present a general approach to enabling greater access to and flexibility in health access modelling. The tools demonstrate a method that substantially simplifies the process for conducting travel time assessments and demonstrate a dynamic, interactive approach in an open source GIS format. In addition this paper provides examples from empirical experience where these tools have informed better policy and planning. Travel and health service access is complex and cannot be reduced to a few static modeled outputs. The approaches described in this paper use a unique set of tools to explore this complexity, promote discussion and build understanding with the goal of producing better planning outcomes. The accessible, flexible, interactive and responsive nature of the applications described has the potential to allow complex environmental social and political considerations to be incorporated and visualised. Through supporting evidence-based planning the innovative modelling practices described have the potential to help local health and emergency response planning in the developing world.

Comparison of RS/GIS analysis with classic mapping approaches for siting low-yield boreholes for hand pumps in crystalline terrains. An application to rural communities of the Caimbambo province, Angola

NASA Astrophysics Data System (ADS)

Martín-Loeches, Miguel; Reyes-López, Jaime; Ramírez-Hernández, Jorge; Temiño-Vela, Javier; Martínez-Santos, Pedro

2018-02-01

In poverty-stricken regions of Sub-Saharan Africa, groundwater for supply is often obtained by means of hand pumps, which means that low-yield boreholes are acceptable. However, boreholes are often sited without sufficient hydrogeological information due to budget constraints, which leads to high failure rates. Cost-effective techniques for borehole siting need to be developed in order to maximize the success rate. In regions underlain by granite, weathered formations are usually targeted for drilling, as these are generally presented as a better cost-benefit ratio than the fractured basement. Within this context, this research focuses on a granite region of Angola. A comparison of two mapping techniques for borehole siting-groundwater prospect is presented. A classic hydrogeomorphological map was developed first based on aerial photographs, field mapping and a geophysical survey. This map represents a considerable time investment and was developed by qualified technicians. The second map (RS/GIS) is considerably simpler and more cost-effective. It was developed by the integration in a GIS platform of six maps of equal importance-slope, drainage density, vegetation vigor, presence of clay in the soil, lineaments and rock outcrops-prepared from Landsat 8 imagery and a Digital Elevation Model (DEM). Similar results were obtained in both cases. By means of a supervised classification of Landsat images, RS/GIS analysis allows for the identification of granitic outcrops, house clusters and sandy alluvial valleys. This in turn allows for the delineation of low-interest or contamination-prone areas, thus contributing additional qualitative information. The position of a well that is going to be powered by a handpump is chosen also upon social and local matters as the distance to the stakeholders, information that are not difficult to integrate in the GIS. Although the second map needs some field inputs (i.e. surveys to determine the thickness of the weathered pack), results show that RS/GIS analyses such as this one provide a valuable and cost-effective alternative for siting low-yield boreholes in remote regions.

Development and application of GIS-based PRISM integration through a plugin approach

NASA Astrophysics Data System (ADS)

Lee, Woo-Seop; Chun, Jong Ahn; Kang, Kwangmin

2014-05-01

A PRISM (Parameter-elevation Regressions on Independent Slopes Model) QGIS-plugin was developed on Quantum GIS platform in this study. This Quantum GIS plugin system provides user-friendly graphic user interfaces (GUIs) so that users can obtain gridded meteorological data of high resolutions (1 km × 1 km). Also, this software is designed to run on a personal computer so that it does not require an internet access or a sophisticated computer system. This module is a user-friendly system that a user can generate PRISM data with ease. The proposed PRISM QGIS-plugin is a hybrid statistical-geographic model system that uses coarse resolution datasets (APHRODITE datasets in this study) with digital elevation data to generate the fine-resolution gridded precipitation. To validate the performance of the software, Prek Thnot River Basin in Kandal, Cambodia is selected for application. Overall statistical analysis shows promising outputs generated by the proposed plugin. Error measures such as RMSE (Root Mean Square Error) and MAPE (Mean Absolute Percentage Error) were used to evaluate the performance of the developed PRISM QGIS-plugin. Evaluation results using RMSE and MAPE were 2.76 mm and 4.2%, respectively. This study suggested that the plugin can be used to generate high resolution precipitation datasets for hydrological and climatological studies at a watershed where observed weather datasets are limited.

A GIS-based hillslope erosion and sediment delivery model and its application in the Cerro Grande burn area

NASA Astrophysics Data System (ADS)

Wilson, Cathy J.; Carey, J. William; Beeson, Peter C.; Gard, Marvin O.; Lane, Leonard J.

2001-10-01

An Erratum has been published for this article in Hydrological Processes 16(5) 2002, 1130-1130.A profile-based, analytical hillslope erosion model (HEM) is integrated into a geographical information system (GIS) framework to provide a tool to assess the impact of the Cerro Grande fire on erosion and sediment delivery to the many streams draining the burn area. The model, HEM-GIS, calculates rill and interrill erosion, transport and deposition along digital flow-pathways generated with GIS software. This new erosion and sediment yield technology accounts for complex terrain attributes and their impact on the connectivity of sediment transport pathways from source areas to streams. GIS digital spatial data, including elevation, vegetation cover, burn severity and soil type, are used as input to the model. Output includes spatially distributed predictions of total event-based sediment yield (tonnes or kilograms per square metre). Here the model is applied across an 800 km2 region of the Pajarito Plateau watershed to assess the sedimentation risks associated with a 100 year design rain event. Although unvalidated for the design storm, the model predicts that the fire may cause runoff to increase by three to six times, and sediment yield to increase by more than an order of magnitude. Published in 2001 John Wiley & Sons, Ltd.

Clime: analyzing and producing climate data in GIS environment

NASA Astrophysics Data System (ADS)

Cattaneo, Luigi; Rillo, Valeria; Mercogliano, Paola

2014-05-01

In the last years, Impacts on Soil and Coasts Division (ISC) of CMCC (Euro-Mediterranean Center on Climate Change) had several collaboration experiences with impact communities, including IS-ENES (FP7-INF) and SafeLand (FP7-ENV) projects, which involved a study of landslide risk in Europe, and is currently active in GEMINA (FIRB) and ORIENTGATE (SEE Transnational Cooperation Programme) research projects. As a result, it has brought research activities about different impact of climate changes as flood and landslide hazards, based on climate simulation obtained from the high resolution regional climate models COSMO CLM, developed at CMCC as member of the consortium CLM Assembly. ISC-Capua also collaborates with local institutions interested in atmospherical climate change and also of their impacts on the soil, such as river basin authorities in the Campania region, ARPA Emilia Romagna and ARPA Calabria. Impact models (e.g. hydraulic or stability models) are usually developed in a GIS environment, since they need an accurate territory description, so Clime has been designed to bridge the usually existing gap between climate data - both observed and simulated - gathered from different sources, and impact communities. The main goal of Clime, special purpose Geographic Information System (GIS) software integrated in ESRI ArcGIS Desktop 10, is to easily evaluate multiple climate features and study climate changes over specific geographical domains with their related effects on environment, including impacts on soil. Developed as an add-in tool, this software has been conceived for research activities of ISC Division in order to provide a substantial contribution during post-processing and validation phase. Therefore, it is possible to analyze and compare multiple datasets (observations, climate simulations, etc.) through processes involving statistical functions, percentiles, trends test and evaluation of extreme events with a flexible system of temporal and spatial filtering, and to represent results as maps, temporal and statistic plots (time series, seasonal cycles, PDFs, scatter plots, Taylor diagrams) or Excel tables; in addition, it features bias correction techniques for climate model results. Summarizing, Clime is able to provide users a simple and fast way to retrieve analysis over simulated climate data and observations within any geographical site of interest (provinces, regions, countries, etc.).

Using remote sensing and GIS techniques to estimate discharge and recharge fluxes for the Death Valley regional groundwater flow system, USA

USGS Publications Warehouse

D'Agnese, F. A.; Faunt, C.C.; Turner, A.K.; ,

1996-01-01

The recharge and discharge components of the Death Valley regional groundwater flow system were defined by techniques that integrated disparate data types to develop a spatially complex representation of near-surface hydrological processes. Image classification methods were applied to multispectral satellite data to produce a vegetation map. The vegetation map was combined with ancillary data in a GIS to delineate different types of wetlands, phreatophytes and wet playa areas. Existing evapotranspiration-rate estimates were used to calculate discharge volumes for these area. An empirical method of groundwater recharge estimation was modified to incorporate data describing soil-moisture conditions, and a recharge potential map was produced. These discharge and recharge maps were readily converted to data arrays for numerical modelling codes. Inverse parameter estimation techniques also used these data to evaluate the reliability and sensitivity of estimated values.The recharge and discharge components of the Death Valley regional groundwater flow system were defined by remote sensing and GIS techniques that integrated disparate data types to develop a spatially complex representation of near-surface hydrological processes. Image classification methods were applied to multispectral satellite data to produce a vegetation map. This map provided a basis for subsequent evapotranspiration and infiltration estimations. The vegetation map was combined with ancillary data in a GIS to delineate different types of wetlands, phreatophytes and wet playa areas. Existing evapotranspiration-rate estimates were then used to calculate discharge volumes for these areas. A previously used empirical method of groundwater recharge estimation was modified by GIS methods to incorporate data describing soil-moisture conditions, and a recharge potential map was produced. These discharge and recharge maps were readily converted to data arrays for numerical modelling codes. Inverse parameter estimation techniques also used these data to evaluate the reliability and sensitivity of estimated values.

Modification of a rainfall-runoff model for distributed modeling in a GIS and its validation

NASA Astrophysics Data System (ADS)

Nyabeze, W. R.

A rainfall-runoff model, which can be inter-faced with a Geographical Information System (GIS) to integrate definition, measurement, calculating parameter values for spatial features, presents considerable advantages. The modification of the GWBasic Wits Rainfall-Runoff Erosion Model (GWBRafler) to enable parameter value estimation in a GIS (GISRafler) is presented in this paper. Algorithms are applied to estimate parameter values reducing the number of input parameters and the effort to populate them. The use of a GIS makes the relationship between parameter estimates and cover characteristics more evident. This paper has been produced as part of research to generalize the GWBRafler on a spatially distributed basis. Modular data structures are assumed and parameter values are weighted relative to the module area and centroid properties. Modifications to the GWBRafler enable better estimation of low flows, which are typical in drought conditions.

Management of a water distribution network by coupling GIS and hydraulic modeling: a case study of Chetouane in Algeria

NASA Astrophysics Data System (ADS)

Abdelbaki, Chérifa; Benchaib, Mohamed Mouâd; Benziada, Salim; Mahmoudi, Hacène; Goosen, Mattheus

2017-06-01

For more effective management of water distribution network in an arid region, Mapinfo GIS (8.0) software was coupled with a hydraulic model (EPANET 2.0) and applied to a case study region, Chetouane, situated in the north-west of Algeria. The area is characterized not only by water scarcity but also by poor water management practices. The results showed that a combination of GIS and modeling permits network operators to better analyze malfunctions with a resulting more rapid response as well as facilitating in an improved understanding of the work performed on the network. The grouping of GIS and modeling as an operating tool allows managers to diagnosis a network, to study solutions of problems and to predict future situations. The later can assist them in making informed decisions to ensure an acceptable performance level for optimal network operation.

Resource materials for a GIS spatial analysis course

USGS Publications Warehouse

Raines, Gary L.

2001-01-01

This report consists of materials prepared for a GIS spatial analysis course offered as part of the Geography curriculum at the University of Nevada, Reno and the University of California at Santa Barbara in the spring of 2000. The report is intended to share information with instructors preparing spatial-modeling training and scientists with advanced GIS expertise. The students taking this class had completed each universities GIS curriculum and had a foundation in statistics as part of a science major. This report is organized into chapters that contain the following: Slides used during lectures, Guidance on the use of Arcview, Introduction to filtering in Arcview, Conventional and spatial correlation in Arcview, Tools for fuzzification in Arcview, Data and instructions for creating using ArcSDM for simple weights-of-evidence, fuzzy logic, and neural network models for Carlin-type gold deposits in central Nevada, Reading list on spatial modeling, and Selected student spatial-modeling posters from the laboratory exercises.

Evaluating terrain based criteria for snow avalanche exposure ratings using GIS

NASA Astrophysics Data System (ADS)

Delparte, Donna; Jamieson, Bruce; Waters, Nigel

2010-05-01

Snow avalanche terrain in backcountry regions of Canada is increasingly being assessed based upon the Avalanche Terrain Exposure Scale (ATES). ATES is a terrain based classification introduced in 2004 by Parks Canada to identify "simple", "challenging" and "complex" backcountry areas. The ATES rating system has been applied to well over 200 backcountry routes, has been used in guidebooks, trailhead signs and maps and is part of the trip planning component of the AVALUATOR™, a simple decision-support tool for backcountry users. Geographic Information Systems (GIS) offers a means to model and visualize terrain based criteria through the use of digital elevation model (DEM) and land cover data. Primary topographic variables such as slope, aspect and curvature are easily derived from a DEM and are compatible with the equivalent evaluation criteria in ATES. Other components of the ATES classification are difficult to extract from a DEM as they are not strictly terrain based. An overview is provided of the terrain variables that can be generated from DEM and land cover data; criteria from ATES which are not clearly terrain based are identified for further study or revision. The second component of this investigation was the development of an algorithm for inputting suitable ATES criteria into a GIS, thereby mimicking the process avalanche experts use when applying the ATES classification to snow avalanche terrain. GIS based classifications were compared to existing expert assessments for validity. The advantage of automating the ATES classification process through GIS is to assist avalanche experts with categorizing and mapping remote backcountry terrain.

Open cyberGIS software for geospatial research and education in the big data era

NASA Astrophysics Data System (ADS)

Wang, Shaowen; Liu, Yan; Padmanabhan, Anand

CyberGIS represents an interdisciplinary field combining advanced cyberinfrastructure, geographic information science and systems (GIS), spatial analysis and modeling, and a number of geospatial domains to improve research productivity and enable scientific breakthroughs. It has emerged as new-generation GIS that enable unprecedented advances in data-driven knowledge discovery, visualization and visual analytics, and collaborative problem solving and decision-making. This paper describes three open software strategies-open access, source, and integration-to serve various research and education purposes of diverse geospatial communities. These strategies have been implemented in a leading-edge cyberGIS software environment through three corresponding software modalities: CyberGIS Gateway, Toolkit, and Middleware, and achieved broad and significant impacts.

Users Guide to VSMOKE-GIS for Workstations

Treesearch

Mary F. Harms; Leonidas G. Lavdas

1997-01-01

VSMOKE-GIS was developed to help prescribed burners in the national forests of the Southeastern United States visualize smoke dispersion and to plan prescribed burns. Developed for use on workstations, this decision-support system consists of a graphical user interface, written in Arc/Info Arc Macro Language, and is linked to a FORTRAN computer program. VSMOKE-GIS...

Estimating regional plant biodiversity with GIS modelling

Treesearch

Louis R. Iverson; Anantha M. Prasad; Anantha M. Prasad

1998-01-01

We analyzed a statewide species database together with a county-level geographic information system to build a model based on well-surveyed areas to estimate species richness in less surveyed counties. The model involved GIS (Arc/Info) and statistics (S-PLUS), including spatial statistics (S+SpatialStats).

Designing and Implementing an Online GIS Tool for Schools: The Finnish Case of the PaikkaOppi Project

ERIC Educational Resources Information Center

Riihelä, Juha; Mäki, Sanna

2015-01-01

This article describes initiatives implemented in Finland to create an online learning environment for studying geographic information systems (GIS). A development project produced an online GIS tool called PaikkaOppi, aimed at promoting GIS studies and spatial thinking skills in upper secondary schools. The project is reviewed through analysis of…

Small Core, Big Network: A Comprehensive Approach to GIS Teaching Practice Based on Digital Three-Dimensional Campus Reconstruction

ERIC Educational Resources Information Center

Cheng, Liang; Zhang, Wen; Wang, Jiechen; Li, Manchun; Zhong, Lishan

2014-01-01

Geographic information science (GIS) features a wide range of disciplines and has broad applicability. Challenges associated with rapidly developing GIS technology and the currently limited teaching and practice materials hinder universities from cultivating highly skilled GIS graduates. Based on the idea of "small core, big network," a…

Student Attitudes and the Impact of GIS on Thinking Skills and Motivation

ERIC Educational Resources Information Center

West, Bryan A.

2003-01-01

The value of GIS within school curricula seems well perceived but ill-substantiated. This paper discusses the role of GIS in the development of higher order thinking skills and in motivating student learning. It then reports on attitudinal surveys undertaken before and after student exposure to GIS-related tasks. The tasks formed part of four…

A method for modelling GP practice level deprivation scores using GIS

PubMed Central

Strong, Mark; Maheswaran, Ravi; Pearson, Tim; Fryers, Paul

2007-01-01

Background A measure of general practice level socioeconomic deprivation can be used to explore the association between deprivation and other practice characteristics. An area-based categorisation is commonly chosen as the basis for such a deprivation measure. Ideally a practice population-weighted area-based deprivation score would be calculated using individual level spatially referenced data. However, these data are often unavailable. One approach is to link the practice postcode to an area-based deprivation score, but this method has limitations. This study aimed to develop a Geographical Information Systems (GIS) based model that could better predict a practice population-weighted deprivation score in the absence of patient level data than simple practice postcode linkage. Results We calculated predicted practice level Index of Multiple Deprivation (IMD) 2004 deprivation scores using two methods that did not require patient level data. Firstly we linked the practice postcode to an IMD 2004 score, and secondly we used a GIS model derived using data from Rotherham, UK. We compared our two sets of predicted scores to "gold standard" practice population-weighted scores for practices in Doncaster, Havering and Warrington. Overall, the practice postcode linkage method overestimated "gold standard" IMD scores by 2.54 points (95% CI 0.94, 4.14), whereas our modelling method showed no such bias (mean difference 0.36, 95% CI -0.30, 1.02). The postcode-linked method systematically underestimated the gold standard score in less deprived areas, and overestimated it in more deprived areas. Our modelling method showed a small underestimation in scores at higher levels of deprivation in Havering, but showed no bias in Doncaster or Warrington. The postcode-linked method showed more variability when predicting scores than did the GIS modelling method. Conclusion A GIS based model can be used to predict a practice population-weighted area-based deprivation measure in the absence of patient level data. Our modelled measure generally had better agreement with the population-weighted measure than did a postcode-linked measure. Our model may also avoid an underestimation of IMD scores in less deprived areas, and overestimation of scores in more deprived areas, seen when using postcode linked scores. The proposed method may be of use to researchers who do not have access to patient level spatially referenced data. PMID:17822545

GeoGIS : phase III.

DOT National Transportation Integrated Search

2011-08-01

GeoGIS is a web-based geotechnical database management system that is being developed for the Alabama : Department of Transportation (ALDOT). The purpose of GeoGIS is to facilitate the efficient storage and retrieval of : geotechnical documents for A...

From healthy start to hurricane Katrina: using GIS to eliminate disparities in perinatal health.

PubMed

Curtis, Andrew

2008-09-10

This paper provides a summary of the invited talk at the 2007 CDC & ATSDR 11th Biennial Symposium on Statistical Methods conference in which a university-non-profit collaboration targeted the elimination of racial disparities in perinatal health with the use of a Geographic Information System (GIS). This program will be described in four temporal stages; the pre-program early years (1999--2001) where the health burden is defined, leading to the Healthy Start years (2001--2005), in which spatial analyses, methods to effectively disseminate GIS results, the creation of the Baton Rouge Healthy Start database, and a move toward a conceptual goal of creating a holistic neighborhood GIS-health model are all described. The Katrina years (September 2005--early 2006) portrays the impact of the disaster and how the collaboration changed as resources from both were directed toward both response and recovery. The final section of the paper, the Post-Katrina years (early 2006 and ongoing) describes how the health landscape of Louisiana, including Baton Rouge as well as New Orleans, has worsened after the storms. An argument is made that the relationships and GIS structure developed during the collaboration's pre-Katrina years, even though stretched, provide the flexibility to analyze and cope with a Katrina-type shock to the system.

Utilization of geoinformation tools for the development of forest fire hazard mapping system: example of Pekan fire, Malaysia

NASA Astrophysics Data System (ADS)

Mahmud, Ahmad Rodzi; Setiawan, Iwan; Mansor, Shattri; Shariff, Abdul Rashid Mohamed; Pradhan, Biswajeet; Nuruddin, Ahmed

2009-12-01

A study in modeling fire hazard assessment will be essential in establishing an effective forest fire management system especially in controlling and preventing peat fire. In this paper, we have used geographic information system (GIS), in combination with other geoinformation technologies such as remote sensing and computer modeling, for all aspects of wild land fire management. Identifying areas that have a high probability of burning is an important component of fire management planning. The development of spatially explicit GIS models has greatly facilitated this process by allowing managers to map and analyze variables contributing to fire occurrence across large, unique geographic units. Using the model and its associated software engine, the fire hazard map was produced. Extensive avenue programming scripts were written to provide additional capabilities in the development of these interfaces to meet the full complement of operational software considering various users requirements. The system developed not only possesses user friendly step by step operations to deliver the fire vulnerability mapping but also allows authorized users to edit, add or modify parameters whenever necessary. Results from the model can support fire hazard mapping in the forest and enhance alert system function by simulating and visualizing forest fire and helps for contingency planning.

Land use change and conversion effects on ground water quality trends: An integration of land change modeler in GIS and a new Ground Water Quality Index developed by fuzzy multi-criteria group decision-making models.

PubMed

Shooshtarian, Mohammad Reza; Dehghani, Mansooreh; Margherita, Ferrante; Gea, Oliveri Conti; Mortezazadeh, Shima

2018-04-01

This study aggregated Land Change Modeller (LCM) as a useful model in GIS with an extended Groundwater Quality Index (GWQI) developed by fuzzy Multi-Criteria Group Decision-Making models to investigate the effect of land use change and conversion on groundwater quality being supplied for drinking. The model's performance was examined through an applied study in Shiraz, Iran, in a five year period (2011 to 2015). Four land use maps including urban, industrial, garden, and bare were employed in LCM model and the impact of change in area and their conversion to each other on GWQI changes was analysed. The correlation analysis indicated that increase in the urban land use area and conversion of bare to the residential/industrial land uses, had a relation with water quality decrease. Integration of LCM and GWQI can accurately and logically provide a numerical analysis of the possible impact of land use change and conversion, as one of the influencing factors, on the groundwater quality. Hence, the methodology could be used in urban development planning and management in macro level. Copyright © 2018. Published by Elsevier Ltd.

Effective 3-D surface modeling for geographic information systems

NASA Astrophysics Data System (ADS)

Yüksek, K.; Alparslan, M.; Mendi, E.

2013-11-01

In this work, we propose a dynamic, flexible and interactive urban digital terrain platform (DTP) with spatial data and query processing capabilities of Geographic Information Systems (GIS), multimedia database functionality and graphical modeling infrastructure. A new data element, called Geo-Node, which stores image, spatial data and 3-D CAD objects is developed using an efficient data structure. The system effectively handles data transfer of Geo-Nodes between main memory and secondary storage with an optimized Directional Replacement Policy (DRP) based buffer management scheme. Polyhedron structures are used in Digital Surface Modeling (DSM) and smoothing process is performed by interpolation. The experimental results show that our framework achieves high performance and works effectively with urban scenes independent from the amount of spatial data and image size. The proposed platform may contribute to the development of various applications such as Web GIS systems based on 3-D graphics standards (e.g. X3-D and VRML) and services which integrate multi-dimensional spatial information and satellite/aerial imagery.

Development of regional public transportation GIS architecture and data model.

DOT National Transportation Integrated Search

2012-05-01

The seven Florida Department of Transportation : (FDOT) districts are multicounty districts that : each interact with a number of county and : municipal agencies, including local transit : agencies. FDOT District 7 includes the Tampa-St. : Petersburg...

Development of a regional public transportation GIS architecture and data model.

DOT National Transportation Integrated Search

2012-05-01

Coordinated data sharing is important for government jurisdictions that overlap the same geographic area. For efficient planning and operations purposes, each jurisdiction should have knowledge of the other organizations activities that may affect...

Development of regional public transportation GIS architecture and data model : [summary].

DOT National Transportation Integrated Search

2012-01-01

The seven Florida Department of Transportation : (FDOT) districts are multicounty districts that : each interact with a number of county and : municipal agencies, including local transit : agencies. FDOT District 7 includes the Tampa-St. : Petersburg...

An Updating System for the Gridded Population Database of China Based on Remote Sensing, GIS and Spatial Database Technologies.

PubMed

Yang, Xiaohuan; Huang, Yaohuan; Dong, Pinliang; Jiang, Dong; Liu, Honghui

2009-01-01

The spatial distribution of population is closely related to land use and land cover (LULC) patterns on both regional and global scales. Population can be redistributed onto geo-referenced square grids according to this relation. In the past decades, various approaches to monitoring LULC using remote sensing and Geographic Information Systems (GIS) have been developed, which makes it possible for efficient updating of geo-referenced population data. A Spatial Population Updating System (SPUS) is developed for updating the gridded population database of China based on remote sensing, GIS and spatial database technologies, with a spatial resolution of 1 km by 1 km. The SPUS can process standard Moderate Resolution Imaging Spectroradiometer (MODIS L1B) data integrated with a Pattern Decomposition Method (PDM) and an LULC-Conversion Model to obtain patterns of land use and land cover, and provide input parameters for a Population Spatialization Model (PSM). The PSM embedded in SPUS is used for generating 1 km by 1 km gridded population data in each population distribution region based on natural and socio-economic variables. Validation results from finer township-level census data of Yishui County suggest that the gridded population database produced by the SPUS is reliable.

GIS-based integrated assessment and decision support system for land use planning in consideration of carbon sequestration benefits

NASA Astrophysics Data System (ADS)

Wang, Jun; Chen, J. M.; Li, Manchun; Ju, Weimin

2007-06-01

As the major eligible land use activities in the Clean Development Mechanism (CDM), afforestation and reforestation offer opportunities and potential economic benefits for developing countries to participate in carbon-trade in the potential international carbon (C) sink markets. However, the design and selection of appropriate afforestation and reforestation locations in CDM are complex processes which need integrated assessment (IA) of C sequestration (CS) potential, environmental effects, and socio-economic impacts. This paper promotes the consideration of CS benefits in local land use planning and presents a GIS-based integrated assessment and spatial decision support system (IA-SDSS) to support decision-making on 'where' and 'how' to afforest. It integrates an Integrated Terrestrial Ecosystem Carbon Model (InTEC) and a GIS platform for modeling regional long-term CS potential and assessment of geo-referenced land use criteria including CS consequence, and produces ranking of plantation schemes with different tree species using the Analytic hierarchy process (AHP) method. Three land use scenarios are investigated: (i) traditional land use planning criteria without C benefits, (ii) land use for CS with low C price, and (iii) land use for CS with high price. Different scenarios and consequences will influence the weights of tree-species selection in the AHP decision process.

3D subsurface geological modeling using GIS, remote sensing, and boreholes data

NASA Astrophysics Data System (ADS)

Kavoura, Katerina; Konstantopoulou, Maria; Kyriou, Aggeliki; Nikolakopoulos, Konstantinos G.; Sabatakakis, Nikolaos; Depountis, Nikolaos

2016-08-01

The current paper presents the combined use of geological-geotechnical insitu data, remote sensing data and GIS techniques for the evaluation of a subsurface geological model. High accuracy Digital Surface Model (DSM), airphotos mosaic and satellite data, with a spatial resolution of 0.5m were used for an othophoto base map compilation of the study area. Geological - geotechnical data obtained from exploratory boreholes and the 1:5000 engineering geological maps were digitized and implemented in a GIS platform for a three - dimensional subsurface model evaluation. The study is located at the North part of Peloponnese along the new national road.

Estimating Rooftop Suitability for PV: A Review of Methods, Patents, and Validation Techniques

DOE Office of Scientific and Technical Information (OSTI.GOV)

Melius, J.; Margolis, R.; Ong, S.

2013-12-01

A number of methods have been developed using remote sensing data to estimate rooftop area suitable for the installation of photovoltaics (PV) at various geospatial resolutions. This report reviews the literature and patents on methods for estimating rooftop-area appropriate for PV, including constant-value methods, manual selection methods, and GIS-based methods. This report also presents NREL's proposed method for estimating suitable rooftop area for PV using Light Detection and Ranging (LiDAR) data in conjunction with a GIS model to predict areas with appropriate slope, orientation, and sunlight. NREL's method is validated against solar installation data from New Jersey, Colorado, and Californiamore » to compare modeled results to actual on-the-ground measurements.« less

Biodiversity in environmental assessment-current practice and tools for prediction

DOE Office of Scientific and Technical Information (OSTI.GOV)

Gontier, Mikael; Balfors, Berit; Moertberg, Ulla

Habitat loss and fragmentation are major threats to biodiversity. Environmental impact assessment and strategic environmental assessment are essential instruments used in physical planning to address such problems. Yet there are no well-developed methods for quantifying and predicting impacts of fragmentation on biodiversity. In this study, a literature review was conducted on GIS-based ecological models that have potential as prediction tools for biodiversity assessment. Further, a review of environmental impact statements for road and railway projects from four European countries was performed, to study how impact prediction concerning biodiversity issues was addressed. The results of the study showed the existing gapmore » between research in GIS-based ecological modelling and current practice in biodiversity assessment within environmental assessment.« less

Applications of Mobile GIS in Forestry South Australia

NASA Astrophysics Data System (ADS)

Battad, D. T.; Mackenzie, P.

2012-07-01

South Australian Forestry Corporation (ForestrySA) had been actively investigating the applications of mobile GIS in forestry for the past few years. The main objective is to develop an integrated mobile GIS capability that allows staff to collect new spatial information, verify existing data, and remotely access and post data from the field. Two (2) prototype mobile GIS applications have been developed already using the Environmental Systems Research Institute (ESRI) ARCGISR technology as the main spatial component. These prototype systems are the Forest Health Surveillance System and the Mobile GIS for Wetlands System. The Forest Health Surveillance System prototype is used primarily for aerial forest health surveillance. It was developed using a tablet PC with ArcMapR GIS. A customised toolbar was developed using ArcObjectsR in the Visual Basic 6 Integrated Development Environment (IDE). The resulting dynamic linked library provides a suite of custom tools which enables the following: - quickly create spatial features and attribute the data - full utilisation of global positioning system (GPS) technology - excellent screen display navigation tools, i.e. pan, rotate map, capture of flight path - seamless integration of data into GIS as geodatabase (GDB) feature classes - screen entry of text and conversion to annotation feature classes The Mobile GIS for Wetlands System prototype was developed for verifying existing wetland areas within ForestrySA's plantation estate, collect new wetland data, and record wetland conditions. Mapping of actual wetlands within ForestrySA's plantation estate is very critical because of the need to establish protection buffers around these features during the implementation of plantation operations. System development has been focussed on a mobile phone platform (HTC HD2R ) with WindowsR Mobile 6, ESRI's ArcGISR Mobile software development kit (SDK) employing ArcObjectsR written on C#.NET IDE, and ArcGIS ServerR technology. The system is also implemented in the VILIVR X70. The system has undergone testing by ForestrySA staff and the refinements had been incorporated in the latest version of the system. The system has the following functionalities: - display and query strategic data layers - collect and edit spatial and attribute data - full utilisation of global positioning GPS technology - distance and area measurements - display of high resolution imagery - seamless integration of data into GIS as feature classes - screen display and navigation tools, i.e. pan, zoom in/out, rotate map - capture of flight path The next stages in the development of mobile GIS technologies at ForestrySA are to enhance the systems' capabilities as one of the organization main data capture systems. These include incorporating other applications, e.g. roads/tracks mapping, mapping of significant sites, etc., and migration of the system to Windows Phone7.

Developing and Testing an Online Tool for Teaching GIS Concepts Applied to Spatial Decision-Making

ERIC Educational Resources Information Center

Carver, Steve; Evans, Andy; Kingston, Richard

2004-01-01

The development and testing of a Web-based GIS e-learning resource is described. This focuses on the application of GIS for siting a nuclear waste disposal facility and the associated principles of spatial decision-making using Boolean and weighted overlay methods. Initial student experiences in using the system are analysed as part of a research…

Teaching Gis outside of Geography: A Case Study in the School of International Development, University of East Anglia

ERIC Educational Resources Information Center

Bearman, Nick; Munday, Paul; McAvoy, Daniel

2015-01-01

The importance of developing employability skills of graduates has become a strategic priority in higher education. Knowledge of Geographic Information Systems (GIS) tools is a valuable skill for graduates both in terms of the specific skillset it provides and of the wider transferable skills. This paper discusses the importance of GIS as an…

Modeling structural change in spatial system dynamics: A Daisyworld example.

PubMed

Neuwirth, C; Peck, A; Simonović, S P

2015-03-01

System dynamics (SD) is an effective approach for helping reveal the temporal behavior of complex systems. Although there have been recent developments in expanding SD to include systems' spatial dependencies, most applications have been restricted to the simulation of diffusion processes; this is especially true for models on structural change (e.g. LULC modeling). To address this shortcoming, a Python program is proposed to tightly couple SD software to a Geographic Information System (GIS). The approach provides the required capacities for handling bidirectional and synchronized interactions of operations between SD and GIS. In order to illustrate the concept and the techniques proposed for simulating structural changes, a fictitious environment called Daisyworld has been recreated in a spatial system dynamics (SSD) environment. The comparison of spatial and non-spatial simulations emphasizes the importance of considering spatio-temporal feedbacks. Finally, practical applications of structural change models in agriculture and disaster management are proposed.

Estimation of runoff and sediment yield in the Redrock Creek watershed using AnnAGNPS and GIS

USGS Publications Warehouse

Tsou, Ming‐shu; Zhan, X.-Y.

2004-01-01

Sediment has been identified as a significant threat to water quality and channel clogging that in turn may lead to river flooding. With the increasing awareness of the impairment from sediment to water bodies in a watershed, identifying the locations of the major sediment sources and reducing the sediment through management practices will be important for an effective watershed management. The annualized agricultural non-point source pollution (AnnAGNPS) model and newly developed GIS interface for it were applied in a small agricultural watershed, Redrock Creek watershed, Kansas, in this pilot study for exploring the effectiveness of using this model as a management tool. The calibrated model appropriately simulated monthly runoff and sediment yield through the practices in this study and potentially suggested the ways of sediment reduction through evaluating the changes of land use and field operation in the model for the purpose of watershed management.

Prioritising sewerage maintenance using inferred sewer age: a case study for Edinburgh.

PubMed

Arthur, S; Burkhard, R

2010-01-01

The reported research project focuses on using a database which contains details of customer contacts and CCTV data for a key Scottish catchment to construct a GIS based sewer condition model. Given the nature of the asset registry, a key research challenge was estimating the age of individual lengths of pipe. Within this context, asset age was inferred using the estimated age of surface developments-this involved overlaying the network in a GIS with historical digital maps. The paper illustrates that inferred asset age can reliably be used to highlight assets which are more likely to fail.

Visualizing Economic Development with ArcGIS Explorer

ERIC Educational Resources Information Center

Webster, Megan L.; Milson, Andrew J.

2011-01-01

Numerous educators have noted that Geographic Information Systems (GIS) is a powerful tool for social studies teaching and learning. Yet the use of GIS has been hampered by issues such as the cost of the software and the management of large spatial data files. One trend that shows great promise for GIS in education is the move to cloud computing.…

a 3d GIS Method Applied to Cataloging and Restoring: the Case of Aurelian Walls at Rome

NASA Astrophysics Data System (ADS)

Canciani, M.; Ceniccola, V.; Messi, M.; Saccone, M.; Zampilli, M.

2013-07-01

The project involves architecture, archaeology, restoration, graphic documentation and computer imaging. The objective is development of a method for documentation of an architectural feature, based on a three-dimensional model obtained through laser scanning technologies, linked to a database developed in GIS environment. The case study concerns a short section of Rome's Aurelian walls, including the Porta Latina. The city walls are Rome's largest single architectural monument, subject to continuous deterioration, modification and maintenance since their original construction beginning in 271 AD. The documentation system provides a flexible, precise and easily-applied instrument for recording the full appearance, materials, stratification palimpsest and conservation status, in order to identify restoration criteria and intervention priorities, and to monitor and control the use and conservation of the walls over time. The project began with an analysis and documentation campaign integrating direct, traditional recording methods with indirect, topographic instrument and 3D laser scanning recording. These recording systems permitted development of a geographic information system based on three-dimensional modelling of separate, individual elements, linked to a database and related to the various stratigraphic horizons, the construction techniques, the component materials and their state of degradation. The investigations of the extant wall fabric were further compared to historic documentation, from both graphic and descriptive sources. The resulting model constitutes the core of the GIS system for this specific monument. The methodology is notable for its low cost, precision, practicality and thoroughness, and can be applied to the entire Aurelian wall and to other monuments.

Application of geographical information system in disposal site selection for hazardous wastes.

PubMed

Rezaeimahmoudi, Mehdi; Esmaeli, Abdolreza; Gharegozlu, Alireza; Shabanian, Hassan; Rokni, Ladan

2014-01-01

The aim of this study was to provide a scientific method based on Geographical Information System (GIS) regarding all sustainable development measures to locate a proper landfill for disposal of hazardous wastes, especially industrial (radioactive) wastes. Seven effective factors for determining hazardous waste landfill were applied in Qom Province, central Iran. These criteria included water, slope, population centers, roads, fault, protected areas and geology. The Analysis Hierarchical Process (AHP) model based on pair comparison was used. First, the weight of each factor was determined by experts; afterwards each layer of maps entered to ARC GIS and with special weight multiplied together, finally the best suitable site was introduced. The most suitable sites for burial were in northwest and west of Qom Province and eventually five zones were introduced as the sample sites. GIs and AHP model is introduced as the technical, useful and accelerator tool for disposal site selection. Furthermore it is determined that geological factor is the most effective layer for site selection. It is suggested that geological conditions should be considered primarily then other factors are taken into consideration.

Can a GIS toolbox assess the environmental risk of oil spills? Implementation for oil facilities in harbors.

PubMed

Valdor, Paloma F; Gómez, Aina G; Velarde, Víctor; Puente, Araceli

2016-04-01

Oil spills are one of the most widespread problems in port areas (loading/unloading of bulk liquid, fuel supply). Specific environmental risk analysis procedures for diffuse oil sources that are based on the evolution of oil in the marine environment are needed. Diffuse sources such as oil spills usually present a lack of information, which makes the use of numerical models an arduous and occasionally impossible task. For that reason, a tool that can assess the risk of oil spills in near-shore areas by using Geographical Information System (GIS) is presented. The SPILL Tool provides immediate results by automating the process without miscalculation errors. The tool was developed using the Python and ArcGIS scripting library to build a non-ambiguous geoprocessing workflow. The SPILL Tool was implemented for oil facilities at Tarragona Harbor (NE Spain) and validated showing a satisfactory correspondence (around 0.60 RSR error index) with the results obtained using a 2D calibrated oil transport numerical model. Copyright © 2016 Elsevier Ltd. All rights reserved.

Study on the total amount control of atmospheric pollutant based on GIS.

PubMed

Wang, Jian-Ping; Guo, Xi-Kun

2005-08-01

To provide effective environmental management for total amount control of atmospheric pollutants. An atmospheric diffusion model of sulfur dioxide on the surface of the earth was established and tested in Shantou of Guangdong Province on the basis of an overall assessment of regional natural environment, social economic state of development, pollution sources and atmospheric environmental quality. Compared with actual monitoring results in a studied region, simulation values fell within the range of two times of error and were evenly distributed in the two sides of the monitored values. Predicted with the largest emission model method, the largest emission of sulfur dioxide would be 54,279.792 tons per year in 2010. The mathematical model established and revised on the basis of GIS is more rational and suitable for the regional characteristics of total amount control of air pollutants.

The influence of urban development and social mobility on socioeconomic level: The application of GIS on urban ecosystems

NASA Astrophysics Data System (ADS)

Suhaili Mansor, Nur; Zulhaidi Mohd Shafri, Helmi; Mansor, Shattri; Paradhan, Biswajeet

2014-06-01

Specifically, the integration between social sciences and natural science are fundamental in our understanding of the economic, social and technological transformations that have drastically changed the society. This study will be based on the municipality of Sungai Petani, Kedah as it has been most influenced by urbanization and urban development. Urban development in Sungai Petani is closely associated with a tremendous increase in demand for land, which is highly related to population growth, human movement and their social mobility. The qualitative case study taken will rely on the visual interpretation technique that would allow the researcher to develop a map of urban changes detection. The potential application of GIS information to estimate socioeconomic indicators and the modelling of socio-economic activities that are explored in this study is hoped to increase further our understanding of the impacts of development and urbanization on social life.

GIS for environmental stewardship and streamlining: an overview of state DOT practices

DOT National Transportation Integrated Search

2005-01-31

The Federal Highway Administration (FHWA) supports the adoption and development of Geographic Information System (GIS) technologies to promote environmental streamlining and stewardship (referred to as GIS4EST). While several States have already appl...

Advanced GIS Exercise: Performing Error Analysis in ArcGIS ModelBuilder

ERIC Educational Resources Information Center

Hall, Steven T.; Post, Christopher J.

2009-01-01

Knowledge of Geographic Information Systems is quickly becoming an integral part of the natural resource professionals' skill set. With the growing need of professionals with these skills, we created an advanced geographic information systems (GIS) exercise for students at Clemson University to introduce them to the concept of error analysis,…

Incorporation of Student-Centered, Practical Applications of Geographic Information Systems to Raise Awareness and Generate Solutions for Local Environmental Issues

NASA Astrophysics Data System (ADS)

Bilsley, N. A.; Love, C. A.; Minster, J. B. H.

2014-12-01

Geographic Information Systems (GIS) offer a plethora of applications for numerous fields, from geological sciences to urban planning. Therefore, developing a practical GIS curriculum for students from a diverse selection of majors can be challenging, especially since time constraints presented by the course term limit the number of projects that can cater to each student's academic focus. However, open ended assignments that allow students the freedom to personalize their projects present an opportunity to teach the universal functionality of GIS, as well as stimulate curiosity of students from all backgrounds by allowing them to tailor a project to their personal interests. During an introductory GIS course at the University of California, San Diego, projects prompted students to utilize ArcGIS in ways of their choice that raised awareness of local environmental issues, as well as encouraged students to incorporate environmentally sustainable practices into their lives. In view of the frequently stated interest of students to enter careers where they can use their newly learned GIS skills, the educational platform of choice is ESRI's ArcGIS, but the choice of platform remains flexible. As GIS resources become more accessible with the development of programs such as OpenGIS and OpenStreetMap, the potential for GIS to effectively communicate environmental issues to the public is growing fast. Incorporating these environmental issues into a curriculum not only allows students to personalize their education, but also raises awareness of such problems and provides students with the ability to communicate those issues using GIS.

Development of a LiDAR derived digital elevation model (DEM) as Input to a METRANS geographic information system (GIS).

DOT National Transportation Integrated Search

2011-05-01

This report describes an assessment of digital elevation models (DEMs) derived from : LiDAR data for a subset of the Ports of Los Angeles and Long Beach. A methodology : based on Monte Carlo simulation was applied to investigate the accuracy of DEMs ...

A GIS-BASED MULTI-SCALE APPROACH TO HABITAT MODEL FOR THE COMMON LOON, GAVIA IMMER, IN NEW HAMPSHIRE, USA.

EPA Science Inventory

The U.S. EPA National Health and Environmental Effects Research Laboratory's (NHEERL) Wildlife Research Strategy was developed to provide methods, models and data to address concerns related to toxic chemicals and habitat alteration in the context of wildlife risk assessment and ...

Applying GIS to develop a model for forest fire risk: A case study in Espírito Santo, Brazil.

PubMed

Eugenio, Fernando Coelho; dos Santos, Alexandre Rosa; Fiedler, Nilton Cesar; Ribeiro, Guido Assunção; da Silva, Aderbal Gomes; dos Santos, Áureo Banhos; Paneto, Greiciane Gaburro; Schettino, Vitor Roberto

2016-05-15

A forest fire risk map is a basic element for planning and protecting forested areas. The main goal of this study was to develop a statistical model for preparing a forest fire risk map using GIS. Such model is based on assigning weights to nine variables divided into two classes: physical factors of the site (terrain slope, land-use/occupation, proximity to roads, terrain orientation, and altitude) and climatic factors (precipitation, temperature, water deficit, and evapotranspiration). In regions where the climate is different from the conditions of this study, the model will require an adjustment of the variables weights according to the local climate. The study area, Espírito Santo State, exhibited approximately 3.81% low risk, 21.18% moderate risk, 30.10% high risk, 41.50% very high risk, and 3.40% extreme risk of forest fire. The areas classified as high risk, very high and extreme, contemplated a total of 78.92% of heat spots. Copyright © 2016 Elsevier Ltd. All rights reserved.

[Ecosystem services evaluation based on geographic information system and remote sensing technology: a review].

PubMed

Li, Wen-Jie; Zhang, Shi-Huang; Wang, Hui-Min

2011-12-01

Ecosystem services evaluation is a hot topic in current ecosystem management, and has a close link with human beings welfare. This paper summarized the research progress on the evaluation of ecosystem services based on geographic information system (GIS) and remote sensing (RS) technology, which could be reduced to the following three characters, i. e., ecological economics theory is widely applied as a key method in quantifying ecosystem services, GIS and RS technology play a key role in multi-source data acquisition, spatiotemporal analysis, and integrated platform, and ecosystem mechanism model becomes a powerful tool for understanding the relationships between natural phenomena and human activities. Aiming at the present research status and its inadequacies, this paper put forward an "Assembly Line" framework, which was a distributed one with scalable characteristics, and discussed the future development trend of the integration research on ecosystem services evaluation based on GIS and RS technologies.

The Examining Your Environment through the Power of Data Project (EYE-POD) Project at NAU: Professional Development for Secondary Education Teachers Using Earth Sciences and GIS

NASA Astrophysics Data System (ADS)

Sample, J. C.; Rubino-Hare, L.; Claesgens, J.; Fredrickson, K.; Manone, M.; White, M.

2010-12-01

The EYE-POD project at Northern Arizona University is an NSF-ITEST-funded professional development program for secondary science (SS) and career technical education (CTE) teachers. The program recruited SS-CTE teacher pairs from Arizona and the surrounding region to participate in two-week workshops during Summer, 2010, and an advanced workshop ins Summer, 2011. The workshops are led by a team with distinct expertise in science content, professional development and pedagogy, GIS, and project evaluation. Learning modules and a workshop agenda are developed using the Legacy Cycle of learning. Rather than compartmentalize pedagogical, content, and GIS learning activities, they have been combined throughout the workshop timeline. Early activities focus on learning of climate and weather processes through GIS modules provided by ESRI-“Mapping our World” and “Analyzing our World”. Participants learn the technical aspects of GIS software while investigating real phenomena. The science/GIS learning activities are augmented by laboratory demonstrations and field data collection using Labquest handheld field measurement systems with a variety of probes. At the end of the first week teacher-participants presented the solution to a problem, using GIS-based climate and weather data, involving travel to various locations on Earth. The second week focused on classroom, lab, and field activities devoted to recommendations to the City of Flagstaff for development in the Rio de Flag floodplain. Teacher-participant groups presented solutions making claims and recommendations supported by evidence from georeferenced field data and other GIS data acquired from various sources. At the close of the workshop teachers were provided with GIS software, hardware for field data collection, and several reference materials to aid in curriculum development. They have been tasked with implementing two GIS-based Earth science content modules in their schools, to one science class and one CTE class. One module must involve a field-based problem at their school site. The EYE-POD team will provide support to each school team through site visits and phone consultation. As part of the project, data on learning efficacy is being collected by an independent evaluator and analyzed by a science education faculty member (summarized in companion paper by Claesgens, et al.).

Improving data discoverability, accessibility, and interoperability with the Esri ArcGIS Platform at the NASA Atmospheric Science Data Center (ASDC).

NASA Astrophysics Data System (ADS)

Tisdale, M.

2017-12-01

NASA's Atmospheric Science Data Center (ASDC) is operationally using the Esri ArcGIS Platform to improve data discoverability, accessibility and interoperability to meet the diversifying user requirements from government, private, public and academic communities. The ASDC is actively working to provide their mission essential datasets as ArcGIS Image Services, Open Geospatial Consortium (OGC) Web Mapping Services (WMS), and OGC Web Coverage Services (WCS) while leveraging the ArcGIS multidimensional mosaic dataset structure. Science teams at ASDC are utilizing these services through the development of applications using the Web AppBuilder for ArcGIS and the ArcGIS API for Javascript. These services provide greater exposure of ASDC data holdings to the GIS community and allow for broader sharing and distribution to various end users. These capabilities provide interactive visualization tools and improved geospatial analytical tools for a mission critical understanding in the areas of the earth's radiation budget, clouds, aerosols, and tropospheric chemistry. The presentation will cover how the ASDC is developing geospatial web services and applications to improve data discoverability, accessibility, and interoperability.

Cloud Based Web 3d GIS Taiwan Platform

NASA Astrophysics Data System (ADS)

Tsai, W.-F.; Chang, J.-Y.; Yan, S. Y.; Chen, B.

2011-09-01

This article presents the status of the web 3D GIS platform, which has been developed in the National Applied Research Laboratories. The purpose is to develop a global earth observation 3D GIS platform for applications to disaster monitoring and assessment in Taiwan. For quick response to preliminary and detailed assessment after a natural disaster occurs, the web 3D GIS platform is useful to access, transfer, integrate, display and analyze the multi-scale huge data following the international OGC standard. The framework of cloud service for data warehousing management and efficiency enhancement using VMWare is illustrated in this article.

Preparing Teachers to Use GIS: The Impact of a Hybrid Professional Development Program on Teachers' Use of GIS

ERIC Educational Resources Information Center

Moore, Steven; Haviland, Don; Moore, William; Tran, Michael

2016-01-01

This article reports the findings of a 3-year study of a hybrid professional development program designed to prepare science and mathematics teachers to implement GIS in their classrooms. The study was conducted as part of the CoastLines Innovative Technology Experiences for Students and Teachers project funded by the National Science Foundation.…

r.avaflow, the GIS simulation model for avalanche and debris flows: new developments and challenges

NASA Astrophysics Data System (ADS)

Mergili, Martin; Queiroz de Oliveira, Gustavo; Fischer, Jan-Thomas; Krenn, Julia; Kulisch, Helmut; Malcherek, Andreas; Pudasaini, Shiva P.

2016-04-01

We present the latest developments and discuss some of the key challenges with regard to the novel and unified computational tool r.avaflow, representing an advanced, comprehensive, GIS-based open source simulation environment for two-phase geophysical mass flows such as avalanches of snow or rock, flows of debris or mud, and related process chains. r.avaflow is freely available and adoptable as a raster module of the GRASS GIS software (http://www.avaflow.org). We focus on the following issues: (1) We back-calculate a laboratory-scale debris flow experiment with r.avaflow and thereby show that different types of drag may govern the evolving flow dynamics, depending on the initial flow configuratiuon. In particular, it appears necessary to consider viscous ambient drag in order to achieve simulation results in line with experimentally measurements. (2) We employ a set of well-documented rock avalanche events to illustrate the use of a built-in functionality for parameter sensitivity analysis and optimization. To do so, we demonstrate possible strategies going beyond the deficient one-at-a-time simulation approach. They allow us to test three or more parameters at once with a limited number of model runs. Computational times are kept at an acceptable level by multi-core processing strategies and use of the Vienna Scientific Cluster. We further discuss a number of key issues with regard to (i) arbitrary mountain topography; and (ii) entrainment and deposition of material. Most tests indicate a good model performance when the affected areas predicted for a late stage of the flow simulation are compared with observed affected areas. However, we note that such a validation is not fully justified without the implementation of a physically correct model for the deposition process. Acknowledgement: The work was conducted as part of the international cooperation project "A GIS simulation model for avalanche and debris flows (avaflow)" supported by the Austrian Science Fund (FWF, project number I 1600-N30) and the German Research Foundation (DFG, project number PU 386/3-1).

GIS-Based System of Hydrologic and Hydraulic Applications for Highway Engineering

DOT National Transportation Integrated Search

1999-10-01

In this research project, a GIS has been developed to assist in the design of highway drainage facilities by utilizing hydrologic spatial data to calculate the input parameters for standard hydrologic software packages. This GIS reduces the analysis ...

DOE Office of Scientific and Technical Information (OSTI.GOV)

Jiang, Like; Kang, Jian, E-mail: j.kang@sheffield.ac.uk; Schroth, Olaf

Large scale transportation projects can adversely affect the visual perception of environmental quality and require adequate visual impact assessment. In this study, we investigated the effects of the characteristics of the road project and the character of the existing landscape on the perceived visual impact of motorways, and developed a GIS-based prediction model based on the findings. An online survey using computer-visualised scenes of different motorway and landscape scenarios was carried out to obtain perception-based judgements on the visual impact. Motorway scenarios simulated included the baseline scenario without road, original motorway, motorways with timber noise barriers, transparent noise barriers andmore » tree screen; different landscape scenarios were created by changing land cover of buildings and trees in three distance zones. The landscape content of each scene was measured in GIS. The result shows that presence of a motorway especially with the timber barrier significantly decreases the visual quality of the view. The resulted visual impact tends to be lower where it is less visually pleasant with more buildings in the view, and can be slightly reduced by the visual absorption effect of the scattered trees between the motorway and the viewpoint. Based on the survey result, eleven predictors were identified for the visual impact prediction model which was applied in GIS to generate maps of visual impact of motorways in different scenarios. The proposed prediction model can be used to achieve efficient and reliable assessment of visual impact of motorways. - Highlights: • Motorways induce significant visual impact especially with timber noise barriers. • Visual impact is negatively correlated with amount of buildings in the view. • Visual impact is positively correlated with percentage of trees in the view. • Perception-based motorway visual impact prediction model using mapped predictors • Predicted visual impacts in different scenarios are mapped in GIS.« less

The use of GIS and modelling approaches in squirrel population management and conservation: A review

Treesearch

P. W. W. Lurz; J. L. Koprowski; D. J. A. Wood

2008-01-01

We review modelling approaches in relation to three key areas of sciurid ecology: management, disease risk assessments and conservation. Models enable us to explore different scenarios to develop effective management and conservation strategies. They may also assist in identifying and targeting research needs for tree and flying squirrels. However, there is a need to...

DRAINMOD-GIS: a lumped parameter watershed scale drainage and water quality model

Treesearch

G.P. Fernandez; G.M. Chescheir; R.W. Skaggs; D.M. Amatya

2006-01-01

A watershed scale lumped parameter hydrology and water quality model that includes an uncertainty analysis component was developed and tested on a lower coastal plain watershed in North Carolina. Uncertainty analysis was used to determine the impacts of uncertainty in field and network parameters of the model on the predicted outflows and nitrate-nitrogen loads at the...

Modeling physical and chemical climate of the northeastern United States for a geographic information system

Treesearch

Scott V. Ollinger; John D. Aber; Anthony C. Federer; Gary M. Lovett; Jennifer M. Ellis

1995-01-01

A model of physical and chemical climate was developed for New York and New England that can be used in a GIs for integration with ecosystem models. The variables included are monthly average maximum and minimum daily temperatures, precipitation, humidity, and solar radiation, as well as annual atmospheric deposition of sulfur and nitrogen. Equations generated from...

National Conference on the Educational Applications of Geographic Information Systems (EdGIS): Conference Report (1st, Washington, D.C., January 27-29, 1994).

ERIC Educational Resources Information Center

Barstow, Daniel, Ed.; And Others

The goals of the Educational Applications of Geographic Information Systems (EdGIS) Conference were to: showcase current applications of Geographic Information Systems (GIS), remote sensing, and other mapping software in pre-college education; develop a better understanding of the current state of the art in both GIS software and related…

E-DECIDER Decision Support Gateway For Earthquake Disaster Response

NASA Astrophysics Data System (ADS)

Glasscoe, M. T.; Stough, T. M.; Parker, J. W.; Burl, M. C.; Donnellan, A.; Blom, R. G.; Pierce, M. E.; Wang, J.; Ma, Y.; Rundle, J. B.; Yoder, M. R.

2013-12-01

Earthquake Data Enhanced Cyber-Infrastructure for Disaster Evaluation and Response (E-DECIDER) is a NASA-funded project developing capabilities for decision-making utilizing remote sensing data and modeling software in order to provide decision support for earthquake disaster management and response. E-DECIDER incorporates earthquake forecasting methodology and geophysical modeling tools developed through NASA's QuakeSim project in order to produce standards-compliant map data products to aid in decision-making following an earthquake. Remote sensing and geodetic data, in conjunction with modeling and forecasting tools, help provide both long-term planning information for disaster management decision makers as well as short-term information following earthquake events (i.e. identifying areas where the greatest deformation and damage has occurred and emergency services may need to be focused). E-DECIDER utilizes a service-based GIS model for its cyber-infrastructure in order to produce standards-compliant products for different user types with multiple service protocols (such as KML, WMS, WFS, and WCS). The goal is to make complex GIS processing and domain-specific analysis tools more accessible to general users through software services as well as provide system sustainability through infrastructure services. The system comprises several components, which include: a GeoServer for thematic mapping and data distribution, a geospatial database for storage and spatial analysis, web service APIs, including simple-to-use REST APIs for complex GIS functionalities, and geoprocessing tools including python scripts to produce standards-compliant data products. These are then served to the E-DECIDER decision support gateway (http://e-decider.org), the E-DECIDER mobile interface, and to the Department of Homeland Security decision support middleware UICDS (Unified Incident Command and Decision Support). The E-DECIDER decision support gateway features a web interface that delivers map data products including deformation modeling results (slope change and strain magnitude) and aftershock forecasts, with remote sensing change detection results under development. These products are event triggered (from the USGS earthquake feed) and will be posted to event feeds on the E-DECIDER webpage and accessible via the mobile interface and UICDS. E-DECIDER also features a KML service that provides infrastructure information from the FEMA HAZUS database through UICDS and the mobile interface. The back-end GIS service architecture and front-end gateway components form a decision support system that is designed for ease-of-use and extensibility for end-users.

Comparing GIS-based habitat models for applications in EIA and SEA

DOE Office of Scientific and Technical Information (OSTI.GOV)

Gontier, Mikael, E-mail: gontier@kth.s; Moertberg, Ulla, E-mail: mortberg@kth.s; Balfors, Berit, E-mail: balfors@kth.s

Land use changes, urbanisation and infrastructure developments in particular, cause fragmentation of natural habitats and threaten biodiversity. Tools and measures must be adapted to assess and remedy the potential effects on biodiversity caused by human activities and developments. Within physical planning, environmental impact assessment (EIA) and strategic environmental assessment (SEA) play important roles in the prediction and assessment of biodiversity-related impacts from planned developments. However, adapted prediction tools to forecast and quantify potential impacts on biodiversity components are lacking. This study tested and compared four different GIS-based habitat models and assessed their relevance for applications in environmental assessment. The modelsmore » were implemented in the Stockholm region in central Sweden and applied to data on the crested tit (Parus cristatus), a sedentary bird species of coniferous forest. All four models performed well and allowed the distribution of suitable habitats for the crested tit in the Stockholm region to be predicted. The models were also used to predict and quantify habitat loss for two regional development scenarios. The study highlighted the importance of model selection in impact prediction. Criteria that are relevant for the choice of model for predicting impacts on biodiversity were identified and discussed. Finally, the importance of environmental assessment for the preservation of biodiversity within the general frame of biodiversity conservation is emphasised.« less

Cloud GIS Based Watershed Management

NASA Astrophysics Data System (ADS)

Bediroğlu, G.; Colak, H. E.

2017-11-01

In this study, we generated a Cloud GIS based watershed management system with using Cloud Computing architecture. Cloud GIS is used as SAAS (Software as a Service) and DAAS (Data as a Service). We applied GIS analysis on cloud in terms of testing SAAS and deployed GIS datasets on cloud in terms of DAAS. We used Hybrid cloud computing model in manner of using ready web based mapping services hosted on cloud (World Topology, Satellite Imageries). We uploaded to system after creating geodatabases including Hydrology (Rivers, Lakes), Soil Maps, Climate Maps, Rain Maps, Geology and Land Use. Watershed of study area has been determined on cloud using ready-hosted topology maps. After uploading all the datasets to systems, we have applied various GIS analysis and queries. Results shown that Cloud GIS technology brings velocity and efficiency for watershed management studies. Besides this, system can be easily implemented for similar land analysis and management studies.

GIS-based suitability modeling and multi-criteria decision analysis for utility scale solar plants in four states in the Southeast U.S

NASA Astrophysics Data System (ADS)

Tisza, Kata

Photovoltaic (PV) development shows significantly smaller growth in the Southeast U.S., than in the Southwest; which is mainly due to the low cost of fossil-fuel based energy production in the region and the lack of solar incentives. However, the Southeast has appropriate insolation conditions (4.0-6.0 KWh/m2/day) for photovoltaic deployment and in the past decade the region has experienced the highest population growth for the entire country. These factors, combined with new renewable energy portfolio policies, could create an opportunity for PV to provide some of the energy that will be required to sustain this growth. The goal of the study was to investigate the potential for PV generation in the Southeast region by identifying suitable areas for a utility-scale solar power plant deployment. Four states with currently low solar penetration were studied: Georgia, North Carolina, South Carolina and Tennessee. Feasible areas were assessed with Geographic Information Systems (GIS) software using solar, land use and population growth criteria combined with proximity to transmission lines and roads. After the GIS-based assessment of the areas, technological potential was calculated for each state. Multi-decision analysis model (MCDA) was used to simulate the decision making method for a strategic PV installation. The model accounted for all criteria necessary to consider in case of a PV development and also included economic and policy criteria, which is thought to be a strong influence on the PV market. Three different scenarios were established, representing decision makers' theoretical preferences. Map layers created in the first part were used as basis for the MCDA and additional technical, economic and political/market criteria were added. A sensitivity analysis was conducted to test the model's robustness. Finally, weighted criteria were assigned to the GIS map layers, so that the different preference systems could be visualized. As a result, lands suitable for a potential industrial-scale PV deployment were assessed. Moreover, a precise calculation for technical potential was conducted, with a capacity factor determined by the actual insolation of the sum of each specific feasible area. The results of the study showed that, for a utility-scale PV utility deployment, significant amount of feasible areas are available, with good electricity generation potential Moreover, a stable MCDA model was established for supporting strategic decision making in a PV deployment. Also, changes of suitable lands for utility-scale PV installations were visualized in GIS for the state of Tennessee.

Preliminary Guidelines for Installation Product Line Land Management Suite (LMS) Product Developers

DTIC Science & Technology

2005-01-01

land use patterns might call a storm simulation model available as a CDF service to evaluate the ability of the pattern to maintain water quality ...Analysis GIS data Server Internal DIAS objects External DIAS objects External CDF services Fort Future DIAS Model GUI Figure 10. A Fort Future DIAS...31 iv ERDC/CERL TR-05-1 Are Programs that Analyze Data Being Developed as CDF Services

Structure and data consistency of a GIS database for geological risk analysis in S. Miguel Island (Azores)

NASA Astrophysics Data System (ADS)

Queiroz, G.; Goulart, C.; Gaspar, J. L.; Gomes, A.; Resendes, J. P.; Marques, R.; Gonçalves, P.; Silveira, D.; Valadão, P.

2003-04-01

The Geographic Information Systems (GIS) are becoming a major tool in the domain of geological hazard assessment and risk mitigation. When available, hazard and vulnerability data can easily be represented in a GIS and a great diversity of risk maps can be produced following the implementation of specific predicting models. A major difficulty for those that deal with GIS is to obtain high quality, well geo-referenced and validated data. This situation is particularly evident in the scope of risk analysis due to the diversity of data that need to be considered. In order to develop a coherent database for the geological risk analysis of the Azores archipelago it was decided to use the digital maps edited in 2001 by the Instituto Geográfico do Exército de Portugal (scale 1:25000), comprising altimetry, urban areas, roads and streams network. For the particular case of S. Miguel Island the information contained in these layers was revised and rectifications were made whenever needed. Moreover basic additional layers were added to the system, including counties and parishes administrative limits, agriculture and forested areas. For detailed studies all the edifices (e.g. houses, public buildings, monuments) are being individualized and characterized taking in account several parameters that can become crucial to assess their direct vulnerability to geological hazards (e.g. type of construction, number of floors, roof stability). Geological data obtained (1) through the interpretation of historical documents, (2) during recent fieldwork campaigns (e.g. mapping of volcanic centres and associated deposits, faults, dikes, soil degassing anomalies, landslides) and (3) by the existent monitoring networks (e.g. seismic, geodetic, fluid geochemistry) are also being digitised. The acquisition, storage and maintenance of all this information following the same criteria of quality are critical to guarantee the accuracy and consistency of the GIS database through time. In this work we notice the GIS-based methodologies aimed to assure the development of a GIS database directed to the geological risk analysis in S. Miguel Island. In a long-term programme the same strategy is being extended to the other Azorean islands.

Community-based Early Warning and Adaptive Response System (EWARS) for mosquito borne diseases: An open source/open community approach

NASA Astrophysics Data System (ADS)

Babu, A. N.; Soman, B.; Niehaus, E.; Shah, J.; Sarda, N. L.; Ramkumar, P. S.; Unnithan, C.

2014-11-01

A variety of studies around the world have evaluated the use of remote sensing with and without GIS in communicable diseases. The ongoing Ebola epidemic has highlighted the risks that can arise for the global community from rapidly spreading diseases which may outpace attempts at control and eradication. This paper presents an approach to the development, deployment, validation and wide-spread adoption of a GIS-based temporo-spatial decision support system which is being collaboratively developed in open source/open community mode by an international group that came together under UN auspices. The group believes in an open source/open community approach to make the fruits of knowledge as widely accessible as possible. A core initiative of the groups is the EWARS project. It proposes to strengthen existing public health systems by the development and validation a model for a community based surveillance and response system which will initially address mosquito borne diseases in the developing world. At present mathematical modeling to support EWARS is at an advanced state, and it planned to embark on a pilot project

Comparison of three GIS-based models for predicting rockfall runout zones at a regional scale

NASA Astrophysics Data System (ADS)

Dorren, Luuk K. A.; Seijmonsbergen, Arie C.

2003-11-01

Site-specific information about the level of protection that mountain forests provide is often not available for large regions. Information regarding rockfalls is especially scarce. The most efficient way to obtain information about rockfall activity and the efficacy of protection forests at a regional scale is to use a simulation model. At present, it is still unknown which forest parameters could be incorporated best in such models. Therefore, the purpose of this study was to test and evaluate a model for rockfall assessment at a regional scale in which simple forest stand parameters, such as the number of trees per hectare and the diameter at breast height, are incorporated. Therefore, a newly developed Geographical Information System (GIS)-based distributed model is compared with two existing rockfall models. The developed model is the only model that calculates the rockfall velocity on the basis of energy loss due to collisions with trees and on the soil surface. The two existing models calculate energy loss over the distance between two cell centres, while the newly developed model is able to calculate multiple bounces within a pixel. The patterns of rockfall runout zones produced by the three models are compared with patterns of rockfall deposits derived from geomorphological field maps. Furthermore, the rockfall velocities modelled by the three models are compared. It is found that the models produced rockfall runout zone maps with rather similar accuracies. However, the developed model performs best on forested hillslopes and it also produces velocities that match best with field estimates on both forested and nonforested hillslopes irrespective of the slope gradient.

NEW GIS WATERSHED ANALYSIS TOOLS FOR SOIL CHARACTERIZATION AND EROSION AND SEDIMENTATION MODELING

EPA Science Inventory

A comprehensive procedure for computing soil erosion and sediment delivery metrics has been developed which utilizes a suite of automated scripts and a pair of processing-intensive executable programs operating on a personal computer platform.

GIS and crop simulation modelling applications in climate change research

USDA-ARS?s Scientific Manuscript database

The challenges that climate change presents humanity require an unprecedented ability to predict the responses of crops to environment and management. Geographic information systems (GIS) and crop simulation models are two powerful and highly complementary tools that are increasingly used for such p...

Ecological criteria, participant preferences and location models: A GIS approach toward ATV trail planning

Treesearch

Stephanie A. Snyder; Jay H. Whitmore; Ingrid E. Schneider; Dennis R. Becker

2008-01-01

This paper presents a geographic information system (GIS)-based method for recreational trail location for all-terrain vehicles (ATVs) which considers environmental factors, as well as rider preferences for trail attributes. The method utilizes the Least-Cost Path algorithm within a GIS framework to optimize trail location. The trail location algorithm considered trail...

An open source GIS-based tool to integrate the fragmentation mechanism in rockfall propagation

NASA Astrophysics Data System (ADS)

Matas, Gerard; Lantada, Nieves; Gili, Josep A.; Corominas, Jordi

2015-04-01

Rockfalls are frequent instability processes in road cuts, open pit mines and quarries, steep slopes and cliffs. Even though the stability of rock slopes can be determined using analytical approaches, the assessment of large rock cliffs require simplifying assumptions due to the difficulty of working with a large amount of joints, the scattering of both the orientations and strength parameters. The attitude and persistency of joints within the rock mass define the size of kinematically unstable rock volumes. Furthermore the rock block will eventually split in several fragments during its propagation downhill due its impact with the ground surface. Knowledge of the size, energy, trajectory… of each block resulting from fragmentation is critical in determining the vulnerability of buildings and protection structures. The objective of this contribution is to present a simple and open source tool to simulate the fragmentation mechanism in rockfall propagation models and in the calculation of impact energies. This tool includes common modes of motion for falling boulders based on the previous literature. The final tool is being implemented in a GIS (Geographic Information Systems) using open source Python programming. The tool under development will be simple, modular, compatible with any GIS environment, open source, able to model rockfalls phenomena correctly. It could be used in any area susceptible to rockfalls with a previous adjustment of the parameters. After the adjustment of the model parameters to a given area, a simulation could be performed to obtain maps of kinetic energy, frequency, stopping density and passing heights. This GIS-based tool and the analysis of the fragmentation laws using data collected from recent rockfall have being developed within the RockRisk Project (2014-2016). This project is funded by the Spanish Ministerio de Economía y Competitividad and entitled "Rockfalls in cliffs: risk quantification and its prevention"(BIA2013-42582-P).

The Modular Modeling System (MMS): A toolbox for water- and environmental-resources management

USGS Publications Warehouse

Leavesley, G.H.; Markstrom, S.L.; Viger, R.J.; Hay, L.E.; ,

2005-01-01

The increasing complexity of water- and environmental-resource problems require modeling approaches that incorporate knowledge from a broad range of scientific and software disciplines. To address this need, the U.S. Geological Survey (USGS) has developed the Modular Modeling System (MMS). MMS is an integrated system of computer software for model development, integration, and application. Its modular design allows a high level of flexibility and adaptability to enable modelers to incorporate their own software into a rich array of built-in models and modeling tools. These include individual process models, tightly coupled models, loosely coupled models, and fully- integrated decision support systems. A geographic information system (GIS) interface, the USGS GIS Weasel, has been integrated with MMS to enable spatial delineation and characterization of basin and ecosystem features, and to provide objective parameter-estimation methods for models using available digital data. MMS provides optimization and sensitivity-analysis tools to analyze model parameters and evaluate the extent to which uncertainty in model parameters affects uncertainty in simulation results. MMS has been coupled with the Bureau of Reclamation object-oriented reservoir and river-system modeling framework, RiverWare, to develop models to evaluate and apply optimal resource-allocation and management strategies to complex, operational decisions on multipurpose reservoir systems and watersheds. This decision support system approach has been developed, tested, and implemented in the Gunnison, Yakima, San Joaquin, Rio Grande, and Truckee River basins of the western United States. MMS is currently being coupled with the U.S. Forest Service model SIMulating Patterns and Processes at Landscape Scales (SIMPPLLE) to assess the effects of alternative vegetation-management strategies on a variety of hydrological and ecological responses. Initial development and testing of the MMS-SIMPPLLE integration is being conducted on the Colorado Plateau region of the western United Sates.

Integrating GIS and ABM to Explore Spatiotemporal Dynamics

NASA Astrophysics Data System (ADS)

Sun, M.; Jiang, Y.; Yang, C.

2013-12-01

Agent-based modeling as a methodology for the bottom-up exploration with the account of adaptive behavior and heterogeneity of system components can help discover the development and pattern of the complex social and environmental system. However, ABM is a computationally intensive process especially when the number of system components becomes large and the agent-agent/agent-environmental interaction is modeled very complex. Most of traditional ABM frameworks developed based on CPU do not have a satisfying computing capacity. To address the problem and as the emergence of advanced techniques, GPU computing with CUDA can provide powerful parallel structure to enable the complex simulation of spatiotemporal dynamics. In this study, we first develop a GPU-based ABM system. Secondly, in order to visualize the dynamics generated from the movement of agent and the change of agent/environmental attributes during the simulation, we integrate GIS into the ABM system. Advanced geovisualization technologies can be utilized for representing the spatiotemporal change events, such as proper 2D/3D maps with state-of-the-art symbols, space-time cube and multiple layers each of which presents pattern in one time-stamp, etc. Thirdly, visual analytics which include interactive tools (e.g. grouping, filtering, linking, etc.) is included in our ABM-GIS system to help users conduct real-time data exploration during the progress of simulation. Analysis like flow analysis and spatial cluster analysis can be integrated according to the geographical problem we want to explore.

Using a Geographic Information System to Assess the Risk of Hurricane Hazards on the Maya Civilization

NASA Astrophysics Data System (ADS)

Weigel, A. M.; Griffin, R.; Sever, T.

2014-12-01

The extent of the Maya civilization spanned across portions of modern day Mexico, Belize, Guatemala, El Salvador and Honduras. Paleoclimatic studies suggest this region has been affected by strong hurricanes for the past six thousand years, reinforced by archeological evidence from Mayan records indicating they experienced strong storms. It is theorized hurricanes aided in the collapse of the Maya, damaging building structures, agriculture, and ceasing industry activities. Today, this region is known for its active tropical climatology, being hit by numerous strong storms including Hurricane Dean, Iris, Keith, and Mitch. This research uses a geographic information system (GIS) to model hurricane hazards, and assess the risk posed on the Maya civilization. GIS has the ability to handle various layer components making it optimal for combining parameters necessary for assessing the risk of experiencing hurricane related hazards. For this analysis, high winds, storm surge flooding, non-storm surge related flooding, and rainfall triggered landslides were selected as the primary hurricane hazards. Data sets used in this analysis include the National Climatic Data Center International Best Track Archive for Climate Stewardships (IBTrACS) hurricane tracks, Shuttle Radar Topography Mission Digital Elevation Model, WorldClim monthly accumulated precipitation, USGS HydroSHEDS river locations, Harmonized World Soil Database soil types, and known Maya site locations from the Electronic Atlas of Ancient Maya Sites. ArcGIS and ENVI software were utilized to process data and model hurricane hazards. To assess locations at risk of experiencing high winds, a model was created using ArcGIS Model Builder to map each storm's temporal wind profile, and adapted to simulate forward storm velocity, and storm frequency. Modeled results were then combined with physical land characteristics, meteorological, and hydrologic data to identify areas likely affected. Certain areas along the eastern edge of the Yucatan peninsula were found to be more prone to experiencing wind and flood related hurricane hazards. Novel methodologies developed from this analysis can be adapted for further hurricane risk assessment on archeological sites.

Worse renal disease in postmenopausal F2[Dahl S x R]-intercross rats: detection of novel QTLs affecting hypertensive kidney disease.

PubMed

Herrera, Victoria L M; Pasion, Khristine A; Moran, Ann Marie; Ruiz-Opazo, Nelson

2013-01-01

The prevalence of hypertension increases after menopause with 75% of postmenopausal women developing hypertension in the United States, along with hypertensive end organ diseases. While human and animal model studies have indicated a protective role for estrogen against cardiovascular disease and glomerulosclerosis, clinical studies of hormone replacement therapy in postmenopausal women have shown polar results with some improvement in hypertension but worsening of hypertensive kidney disease, or no effect at all. These observations suggest that the pathogenesis of postmenopausal hypertension and its target organ complications is more complex than projected, and that loss of endogenous estrogens induces epigenetic changes that alter genetic susceptibility to end-organ complications per se resulting in pathogenetic mechanisms beyond correction by hormone replacement. We studied postmenopausal-induced changes in renal disease and performed a total genome scan for quantitative trait loci (QTLs) affecting kidney disease in postmenopausal 16m-old F2[Dahl S x R]-intercross female rats. We used glomerular injury score (GIS) as quantitative trait. We compared QTLs amongst premenopausal, ovariectomized and postmenopausal F2[Dahl S x R]-intercross rats using identical phenotype characterization. Postmenopausal F2[Dahl S x R]-intercross rats exhibited increased hypertensive glomerulosclerosis (P<0.01) and equivalent levels of kidney disease when compared to premenopausal and ovariectomized F2[Dahl S x R]-intercross rats respectively. We detected three significant to highly significant GIS-QTLs (GIS-pm1 on chromosome 4, LOD 3.54; GIS-pm2 on chromosome 3, LOD 2.72; GIS-pm3 on chromosome 5, LOD 2.37) and two suggestive GIS-QTLs (GIS-pm4 on chromosome 2, LOD 1.70; GIS-pm5 on chromosome 7, LOD 1.28), all of which were unique to this postmenopausal population. Detection of increased renal disease phenotype in postmenopausal and ovariectomized subjects suggests a protective role of ovarian hormones. Furthermore, the detection of distinct GIS-QTLs in postmenopausal intercross female rats suggests that distinct genetic mechanisms underlie hypertensive glomerulosclerosis in premenopausal and postmenopausal states.

Worse Renal Disease in Postmenopausal F2[Dahl S x R]-Intercross Rats: Detection of Novel QTLs Affecting Hypertensive Kidney Disease

PubMed Central

Herrera, Victoria L. M.; Pasion, Khristine A.; Moran, Ann Marie; Ruiz-Opazo, Nelson

2013-01-01

The prevalence of hypertension increases after menopause with 75% of postmenopausal women developing hypertension in the United States, along with hypertensive end organ diseases. While human and animal model studies have indicated a protective role for estrogen against cardiovascular disease and glomerulosclerosis, clinical studies of hormone replacement therapy in postmenopausal women have shown polar results with some improvement in hypertension but worsening of hypertensive kidney disease, or no effect at all. These observations suggest that the pathogenesis of postmenopausal hypertension and its target organ complications is more complex than projected, and that loss of endogenous estrogens induces epigenetic changes that alter genetic susceptibility to end-organ complications per se resulting in pathogenetic mechanisms beyond correction by hormone replacement. We studied postmenopausal-induced changes in renal disease and performed a total genome scan for quantitative trait loci (QTLs) affecting kidney disease in postmenopausal 16m-old F2[Dahl S x R]-intercross female rats. We used glomerular injury score (GIS) as quantitative trait. We compared QTLs amongst premenopausal, ovariectomized and postmenopausal F2[Dahl S x R]-intercross rats using identical phenotype characterization. Postmenopausal F2[Dahl S x R]-intercross rats exhibited increased hypertensive glomerulosclerosis (P<0.01) and equivalent levels of kidney disease when compared to premenopausal and ovariectomized F2[Dahl S x R]-intercross rats respectively. We detected three significant to highly significant GIS-QTLs (GIS-pm1 on chromosome 4, LOD 3.54; GIS-pm2 on chromosome 3, LOD 2.72; GIS-pm3 on chromosome 5, LOD 2.37) and two suggestive GIS-QTLs (GIS-pm4 on chromosome 2, LOD 1.70; GIS-pm5 on chromosome 7, LOD 1.28), all of which were unique to this postmenopausal population. Detection of increased renal disease phenotype in postmenopausal and ovariectomized subjects suggests a protective role of ovarian hormones. Furthermore, the detection of distinct GIS-QTLs in postmenopausal intercross female rats suggests that distinct genetic mechanisms underlie hypertensive glomerulosclerosis in premenopausal and postmenopausal states. PMID:23393608

Phase III : GIS for the Appalachian Development Highway System 2007 cost to complete estimate

DOT National Transportation Integrated Search

2008-02-01

The proposed research will create an ADHS GIS for integrating and disseminating GIS and transportation data that will increase the accuracy and efficiency associated with completing the 2007 ADHS Cost to Complete Estimate. This project will create ap...

Techniques and strategies for data integration in mineral resource assessment

USGS Publications Warehouse

Trautwein, Charles M.; Dwyer, John L.

1991-01-01

The Geologic and the National Mapping divisions of the U.S. Geological Survey have been involved formally in cooperative research and development of computer-based geographic information systems (GISs) applied to mineral-resource assessment objectives since 1982. Experience in the Conterminous United States Mineral Assessment Program (CUSMAP) projects including the Rolla, Missouri; Dillon, Montana; Butte, Montana; and Tonopah, Nevada 1?? ?? 2?? quadrangles, has resulted in the definition of processing requirements for geographically and mineral-resource data that are common to these studies. The diverse formats of data sets collected and compiled for regional mineral-resource assessments necessitate capabilities for digitally encoding and entering data into appropriate tabular, vector, and raster subsystems of the GIS. Although many of the required data sets are either available or can be provided in a digital format suitable for direct entry, their utility is largely dependent on the original intent and consequent preprocessing of the data. In this respect, special care must be taken to ensure the digital data type, encoding, and format will meet assessment objectives. Data processing within the GIS is directed primarily toward the development and application of models that can be used to describe spatially geological, geophysical, and geochemical environments either known or inferred to be associated with specific types of mineral deposits. Consequently, capabilities to analyze spatially, aggregate, and display relations between data sets are principal processing requirements. To facilitate the development of these models within the GIS, interfaces must be developed among vector-, raster-, and tabular-based processing subsystems to reformat resident data sets for comparative analyses and multivariate display of relations.

Geospatial database for heritage building conservation

NASA Astrophysics Data System (ADS)

Basir, W. N. F. W. A.; Setan, H.; Majid, Z.; Chong, A.

2014-02-01

Heritage buildings are icons from the past that exist in present time. Through heritage architecture, we can learn about economic issues and social activities of the past. Nowadays, heritage buildings are under threat from natural disaster, uncertain weather, pollution and others. In order to preserve this heritage for the future generation, recording and documenting of heritage buildings are required. With the development of information system and data collection technique, it is possible to create a 3D digital model. This 3D information plays an important role in recording and documenting heritage buildings. 3D modeling and virtual reality techniques have demonstrated the ability to visualize the real world in 3D. It can provide a better platform for communication and understanding of heritage building. Combining 3D modelling with technology of Geographic Information System (GIS) will create a database that can make various analyses about spatial data in the form of a 3D model. Objectives of this research are to determine the reliability of Terrestrial Laser Scanning (TLS) technique for data acquisition of heritage building and to develop a geospatial database for heritage building conservation purposes. The result from data acquisition will become a guideline for 3D model development. This 3D model will be exported to the GIS format in order to develop a database for heritage building conservation. In this database, requirements for heritage building conservation process are included. Through this research, a proper database for storing and documenting of the heritage building conservation data will be developed.

GIS-and Web-based Water Resource Geospatial Infrastructure for Oil Shale Development

DOE Office of Scientific and Technical Information (OSTI.GOV)

Zhou, Wei; Minnick, Matthew; Geza, Mengistu

2012-09-30

The Colorado School of Mines (CSM) was awarded a grant by the National Energy Technology Laboratory (NETL), Department of Energy (DOE) to conduct a research project en- titled GIS- and Web-based Water Resource Geospatial Infrastructure for Oil Shale Development in October of 2008. The ultimate goal of this research project is to develop a water resource geo-spatial infrastructure that serves as “baseline data” for creating solutions on water resource management and for supporting decisions making on oil shale resource development. The project came to the end on September 30, 2012. This final project report will report the key findings frommore » the project activity, major accomplishments, and expected impacts of the research. At meantime, the gamma version (also known as Version 4.0) of the geodatabase as well as other various deliverables stored on digital storage media will be send to the program manager at NETL, DOE via express mail. The key findings from the project activity include the quantitative spatial and temporal distribution of the water resource throughout the Piceance Basin, water consumption with respect to oil shale production, and data gaps identified. Major accomplishments of this project include the creation of a relational geodatabase, automated data processing scripts (Matlab) for database link with surface water and geological model, ArcGIS Model for hydrogeologic data processing for groundwater model input, a 3D geological model, surface water/groundwater models, energy resource development systems model, as well as a web-based geo-spatial infrastructure for data exploration, visualization and dissemination. This research will have broad impacts of the devel- opment of the oil shale resources in the US. The geodatabase provides a “baseline” data for fur- ther study of the oil shale development and identification of further data collection needs. The 3D geological model provides better understanding through data interpolation and visualization techniques of the Piceance Basin structure spatial distribution of the oil shale resources. The sur- face water/groundwater models quantify the water shortage and better understanding the spatial distribution of the available water resources. The energy resource development systems model reveals the phase shift of water usage and the oil shale production, which will facilitate better planning for oil shale development. Detailed descriptions about the key findings from the project activity, major accomplishments, and expected impacts of the research will be given in the sec- tion of “ACCOMPLISHMENTS, RESULTS, AND DISCUSSION” of this report.« less

Modelling Multi Hazard Mapping in Semarang City Using GIS-Fuzzy Method

NASA Astrophysics Data System (ADS)

Nugraha, A. L.; Awaluddin, M.; Sasmito, B.

2018-02-01

One important aspect of disaster mitigation planning is hazard mapping. Hazard mapping can provide spatial information on the distribution of locations that are threatened by disaster. Semarang City as the capital of Central Java Province is one of the cities with high natural disaster intensity. Frequent natural disasters Semarang city is tidal flood, floods, landslides, and droughts. Therefore, Semarang City needs spatial information by doing multi hazard mapping to support disaster mitigation planning in Semarang City. Multi Hazards map modelling can be derived from parameters such as slope maps, rainfall, land use, and soil types. This modelling is done by using GIS method with scoring and overlay technique. However, the accuracy of modelling would be better if the GIS method is combined with Fuzzy Logic techniques to provide a good classification in determining disaster threats. The Fuzzy-GIS method will build a multi hazards map of Semarang city can deliver results with good accuracy and with appropriate threat class spread so as to provide disaster information for disaster mitigation planning of Semarang city. from the multi-hazard modelling using GIS-Fuzzy can be known type of membership that has a good accuracy is the type of membership Gauss with RMSE of 0.404 the smallest of the other membership and VAF value of 72.909% of the largest of the other membership.

The ASTARTE Paleotsunami and Mass Transport Deposits data bases - web-based references for tsunami and submarine landslide research around Europe

NASA Astrophysics Data System (ADS)

De Martini, Paolo Marco; Patera, Antonio; Orefice, Simone; Paris, Raphael; Völker, David; Lastras, Galderic; Terrinha, Pedro; Noiva, João; Smedile, Alessandra; Pantosti, Daniela; Hunt, James; Gutscher, Marc-Andre; Migeon, Sébastien; Papadopoulos, Gerassimos; Triantafyllou, Ioanna; Yalciner, Ahmet C.

2017-04-01

EU project ASTARTE aims at developing a higher level of tsunami hazard assessment in the North East Atlantic, Mediterranean and Connected seas (NEAM) region by a combination of field work, experimental work, numerical modeling and technical development. The project is a cooperative work of 26 institutes from 16 countries and links together the description of past tsunamigenic events, the identification and characterization of tsunami sources, the calculation of the impact of such events, and the development of adequate resilience and risks mitigation strategies (www.astarte.eu). Within ASTARTE two web-based data bases on Paleotsunami and Mass Transport Deposits in the NEAM areas were created with the purpose to be the future information repositories for tsunami research in Europe.The aim is to integrate every existing official scientific reports and peer reviewed papers on these topics and update on new entries every 6-12 months, hosting information and detailed data, that are crucial e.g for tsunami modeling. A relational database managed by ArcGIS for Desktop 10.x software has been implemented. One of the final goals of the project is the public sharing of the archived datasets through a web-based map service that will allow visualizing, querying, analyzing, and interpreting all datasets. The interactive map service will be hosted by ArcGIS Online and will deploy the cloud capabilities of the portal. Any interested users will be able to access the online GIS resources through any Internet browser or specific apps that run on desktop machines, smartphones, or tablets and will be able to use the analytical tools, key tasks, and workflows of the service.We will present the data bases structure and topics as well as their ArcGIS Online version. The research leading to these results has received funding from the European Union's Seventh Framework Programme (FP7/2007-2013) under grant agreement n° 603839 (Project ASTARTE - Assessment, Strategy and Risk Reduction for Tsunamis in Europe).

Developing a Measure of Traffic Calming Associated with Elementary School Students’ Active Transport

PubMed Central

Nicholson, Lisa M.; Turner, Lindsey; Slater, Sandy J.; Abuzayd, Haytham; Chriqui, Jamie F.; Chaloupka, Frank

2014-01-01

The objective of this study is to develop a measure of traffic calming with nationally available GIS data from NAVTEQ and to validate the traffic calming index with the percentage of children reported by school administrators as walking or biking to school, using data from a nationally representative sample of elementary schools in 2006-2010. Specific models, with and without correlated errors, examined associations of objective GIS measures of the built environment, nationally available from NAVTEQ, with the latent construct of traffic calming. The best fit model for the latent traffic calming construct was determined to be a five factor model including objective measures of intersection density, count of medians/dividers, count of low mobility streets, count of roundabouts, and count of on-street parking availability, with no correlated errors among items. This construct also proved to be a good fit for the full measurement model when the outcome measure of percentage of students walking or biking to school was added to the model. The traffic calming measure was strongly, significantly, and positively correlated with the percentage of students reported as walking or biking to school. Applicability of results to public health and transportation policies and practices are discussed. PMID:25506255

Developing a Measure of Traffic Calming Associated with Elementary School Students' Active Transport.

PubMed

Nicholson, Lisa M; Turner, Lindsey; Slater, Sandy J; Abuzayd, Haytham; Chriqui, Jamie F; Chaloupka, Frank

2014-12-01

The objective of this study is to develop a measure of traffic calming with nationally available GIS data from NAVTEQ and to validate the traffic calming index with the percentage of children reported by school administrators as walking or biking to school, using data from a nationally representative sample of elementary schools in 2006-2010. Specific models, with and without correlated errors, examined associations of objective GIS measures of the built environment, nationally available from NAVTEQ, with the latent construct of traffic calming. The best fit model for the latent traffic calming construct was determined to be a five factor model including objective measures of intersection density, count of medians/dividers, count of low mobility streets, count of roundabouts, and count of on-street parking availability, with no correlated errors among items. This construct also proved to be a good fit for the full measurement model when the outcome measure of percentage of students walking or biking to school was added to the model. The traffic calming measure was strongly, significantly, and positively correlated with the percentage of students reported as walking or biking to school. Applicability of results to public health and transportation policies and practices are discussed.

SPATIAL LANDSCAPE INDICES IN A HEDONIC FRAMEWORK: AN ECOLOGICAL ECONOMICS ANALYSIS USING GIS. (R825309)

EPA Science Inventory

Abstract

This paper develops a spatial hedonic model to explain residential values in a region within a 30-mile radius of Washington DC. Hedonic models of housing or land values are commonplace, but are rarely estimated for non-urban problems and never using the type o...

SPATIAL LANDSCAPE INDICES IN A HEDONIC FRAMEWORK: AN ECOLOGICAL ECONOMICS ANALYSIS USING GIS. (R824766)

EPA Science Inventory

Abstract

This paper develops a spatial hedonic model to explain residential values in a region within a 30-mile radius of Washington DC. Hedonic models of housing or land values are commonplace, but are rarely estimated for non-urban problems and never using the type o...

Forest type mapping of the Interior West

Treesearch

Bonnie Ruefenacht; Gretchen G. Moisen; Jock A. Blackard

2004-01-01

This paper develops techniques for the mapping of forest types in Arizona, New Mexico, and Wyoming. The methods involve regression-tree modeling using a variety of remote sensing and GIS layers along with Forest Inventory Analysis (FIA) point data. Regression-tree modeling is a fast and efficient technique of estimating variables for large data sets with high accuracy...

Developing a middleware to support HDF data access in ArcGIS

NASA Astrophysics Data System (ADS)

Sun, M.; Jiang, Y.; Yang, C. P.

2014-12-01

Hierarchical Data Format (HDF) is the standard data format for the NASA Earth Observing System (EOS) data products, like the MODIS level-3 data. These data have been widely used in long-term study of the land surface, biosphere, atmosphere, and oceans of the Earth. Several toolkits have been developed to access HDF data, such as the HDF viewer and Geospatial Data Abstraction Library (GDAL), etc. ArcGIS integrated the GDAL providing data user a Graphical User Interface (GUI) to read HDF data. However, there are still some problems when using the toolkits:for example, 1) the projection information is not recognized correctly, 2) the image is dispalyed inverted, and 3) the tool lacks of capability to read the third dimension information stored in the data subsets, etc. Accordingly, in this study we attempt to improve the current HDF toolkits to address the aformentioned issues. Considering the wide-usage of ArcGIS, we develop a middleware for ArcGIS based on GDAL to solve the particular data access problems happening in ArcGIS, so that data users can access HDF data successfully and perform further data analysis with the ArcGIS geoprocessing tools.

Economic value of big game habitat production from natural and prescribed fire

Treesearch

Armando Gonzalez-Caban; John B. Loomis; Dana Griffin; Elen Wu; Daniel McCollum; Jane McKeever; Diane Freeman

2003-01-01

A macro time-series model and a micro GIS model were used to estimate a production function relating deer harvest response to prescribed fire, holding constant other environmental variables. The macro time-series model showed a marginal increase in deer harvested of 33 for an increase of 1,100 acres of prescribed burn. The marginal deer increase for the micro GIS model...

Modelling the spatial distribution of Fasciola hepatica in bovines using decision tree, logistic regression and GIS query approaches for Brazil.

PubMed

Bennema, S C; Molento, M B; Scholte, R G; Carvalho, O S; Pritsch, I

2017-11-01

Fascioliasis is a condition caused by the trematode Fasciola hepatica. In this paper, the spatial distribution of F. hepatica in bovines in Brazil was modelled using a decision tree approach and a logistic regression, combined with a geographic information system (GIS) query. In the decision tree and the logistic model, isothermality had the strongest influence on disease prevalence. Also, the 50-year average precipitation in the warmest quarter of the year was included as a risk factor, having a negative influence on the parasite prevalence. The risk maps developed using both techniques, showed a predicted higher prevalence mainly in the South of Brazil. The prediction performance seemed to be high, but both techniques failed to reach a high accuracy in predicting the medium and high prevalence classes to the entire country. The GIS query map, based on the range of isothermality, minimum temperature of coldest month, precipitation of warmest quarter of the year, altitude and the average dailyland surface temperature, showed a possibility of presence of F. hepatica in a very large area. The risk maps produced using these methods can be used to focus activities of animal and public health programmes, even on non-evaluated F. hepatica areas.

Municipal GIS incorporates database from pipe lines

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

1994-05-01

League City, a coastal area community of about 35,000 population in Galveston County, Texas, has developed an impressive municipal GIS program. The system represents a textbook example of what a municipal GIS can represent and produce. In 1987, the city engineer was authorized to begin developing the area information system. City survey personnel used state-of-the-art Global Positioning System (GPS) technology to establish a first order monumentation program with a grid of 78 monuments set over 54 sq mi. Street, subdivision, survey, utilities, taxing criteria, hydrology, topography, environmental and other concerns were layered into the municipal GIS database program. Today, areamore » developers submit all layout, design, and land use plan data to the city in digital format without hard copy. Multi-color maps with high resolution graphics can be quickly generate for cross-referenced queries sensitive to political, environmental, engineering, taxing, and/or utility capacity jurisdictions. The design of both the GIS and data base system are described.« less

Development of Web GIS for complex processing and visualization of climate geospatial datasets as an integral part of dedicated Virtual Research Environment

NASA Astrophysics Data System (ADS)

Gordov, Evgeny; Okladnikov, Igor; Titov, Alexander

2017-04-01

For comprehensive usage of large geospatial meteorological and climate datasets it is necessary to create a distributed software infrastructure based on the spatial data infrastructure (SDI) approach. Currently, it is generally accepted that the development of client applications as integrated elements of such infrastructure should be based on the usage of modern web and GIS technologies. The paper describes the Web GIS for complex processing and visualization of geospatial (mainly in NetCDF and PostGIS formats) datasets as an integral part of the dedicated Virtual Research Environment for comprehensive study of ongoing and possible future climate change, and analysis of their implications, providing full information and computing support for the study of economic, political and social consequences of global climate change at the global and regional levels. The Web GIS consists of two basic software parts: 1. Server-side part representing PHP applications of the SDI geoportal and realizing the functionality of interaction with computational core backend, WMS/WFS/WPS cartographical services, as well as implementing an open API for browser-based client software. Being the secondary one, this part provides a limited set of procedures accessible via standard HTTP interface. 2. Front-end part representing Web GIS client developed according to a "single page application" technology based on JavaScript libraries OpenLayers (http://openlayers.org/), ExtJS (https://www.sencha.com/products/extjs), GeoExt (http://geoext.org/). It implements application business logic and provides intuitive user interface similar to the interface of such popular desktop GIS applications, as uDIG, QuantumGIS etc. Boundless/OpenGeo architecture was used as a basis for Web-GIS client development. According to general INSPIRE requirements to data visualization Web GIS provides such standard functionality as data overview, image navigation, scrolling, scaling and graphical overlay, displaying map legends and corresponding metadata information. The specialized Web GIS client contains three basic tires: • Tier of NetCDF metadata in JSON format • Middleware tier of JavaScript objects implementing methods to work with: o NetCDF metadata o XML file of selected calculations configuration (XML task) o WMS/WFS/WPS cartographical services • Graphical user interface tier representing JavaScript objects realizing general application business logic Web-GIS developed provides computational processing services launching to support solving tasks in the area of environmental monitoring, as well as presenting calculation results in the form of WMS/WFS cartographical layers in raster (PNG, JPG, GeoTIFF), vector (KML, GML, Shape), and binary (NetCDF) formats. It has shown its effectiveness in the process of solving real climate change research problems and disseminating investigation results in cartographical formats. The work is supported by the Russian Science Foundation grant No 16-19-10257.

Using GIS to analyze animal movements in the marine environment

USGS Publications Warehouse

Hooge, Philip N.; Eichenlaub, William M.; Solomon, Elizabeth K.; Kruse, Gordon H.; Bez, Nicolas; Booth, Anthony; Dorn, Martin W.; Hills, Susan; Lipcius, Romuald N.; Pelletier, Dominique; Roy, Claude; Smith, Stephen J.; Witherell, David B.

2001-01-01

Advanced methods for analyzing animal movements have been little used in the aquatic research environment compared to the terrestrial. In addition, despite obvious advantages of integrating geographic information systems (GIS) with spatial studies of animal movement behavior, movement analysis tools have not been integrated into GIS for either aquatic or terrestrial environments. We therefore developed software that integrates one of the most commonly used GIS programs (ArcView®) with a large collection of animal movement analysis tools. This application, the Animal Movement Analyst Extension (AMAE), can be loaded as an extension to ArcView® under multiple operating system platforms (PC, Unix, and Mac OS). It contains more than 50 functions, including parametric and nonparametric home range analyses, random walk models, habitat analyses, point and circular statistics, tests of complete spatial randomness, tests for autocorrelation and sample size, point and line manipulation tools, and animation tools. This paper describes the use of these functions in analyzing animal location data; some limited examples are drawn from a sonic-tracking study of Pacific halibut (Hippoglossus stenolepis) in Glacier Bay, Alaska. The extension is available on the Internet at www.absc.usgs.gov/glba/gistools/index.htm.

Using simple agent-based modeling to inform and enhance neighborhood walkability.

PubMed

Badland, Hannah; White, Marcus; Macaulay, Gus; Eagleson, Serryn; Mavoa, Suzanne; Pettit, Christopher; Giles-Corti, Billie

2013-12-11

Pedestrian-friendly neighborhoods with proximal destinations and services encourage walking and decrease car dependence, thereby contributing to more active and healthier communities. Proximity to key destinations and services is an important aspect of the urban design decision making process, particularly in areas adopting a transit-oriented development (TOD) approach to urban planning, whereby densification occurs within walking distance of transit nodes. Modeling destination access within neighborhoods has been limited to circular catchment buffers or more sophisticated network-buffers generated using geoprocessing routines within geographical information systems (GIS). Both circular and network-buffer catchment methods are problematic. Circular catchment models do not account for street networks, thus do not allow exploratory 'what-if' scenario modeling; and network-buffering functionality typically exists within proprietary GIS software, which can be costly and requires a high level of expertise to operate. This study sought to overcome these limitations by developing an open-source simple agent-based walkable catchment tool that can be used by researchers, urban designers, planners, and policy makers to test scenarios for improving neighborhood walkable catchments. A simplified version of an agent-based model was ported to a vector-based open source GIS web tool using data derived from the Australian Urban Research Infrastructure Network (AURIN). The tool was developed and tested with end-user stakeholder working group input. The resulting model has proven to be effective and flexible, allowing stakeholders to assess and optimize the walkability of neighborhood catchments around actual or potential nodes of interest (e.g., schools, public transport stops). Users can derive a range of metrics to compare different scenarios modeled. These include: catchment area versus circular buffer ratios; mean number of streets crossed; and modeling of different walking speeds and wait time at intersections. The tool has the capacity to influence planning and public health advocacy and practice, and by using open-access source software, it is available for use locally and internationally. There is also scope to extend this version of the tool from a simple to a complex model, which includes agents (i.e., simulated pedestrians) 'learning' and incorporating other environmental attributes that enhance walkability (e.g., residential density, mixed land use, traffic volume).

Integrating Transportation Modeling and Desktop GIS: A Practical and Affordable Analysis Tool for Small and Medium Sized Communities

DOT National Transportation Integrated Search

1998-09-16

This paper and presentation discuss some of the benefits of integrating travel : demand models and desktop GIS (ArchInfo and ArcView for PCs) as a : cost-effective and staff saving tool, as well as specific improvements to : transportation planning m...

Real Time Integration of Field Data Into a GIS Platform for the Management of Hydrological Emergencies

NASA Astrophysics Data System (ADS)

Mangiameli, M.; Mussumeci, G.

2013-01-01

A wide series of events requires immediate availability of information and field data to be provided to decision-makers. An example is the necessity of quickly transferring the information acquired from monitoring and alerting sensors or the data of the reconnaissance of damage after a disastrous event to an Emergency Operations Center. To this purpose, we developed an integrated GIS and WebGIS system to dynamically create and populate via Web a database with spatial features. In particular, this work concerns the gathering and transmission of spatial data and related information to the desktop GIS so that they can be displayed and analyzed in real time to characterize the operational scenario and to decide the rescue interventions. As basic software, we used only free and open source: QuantumGIS and Grass as Desktop GIS, Map Server with PMapper application for the Web-Gis functionality and PostGreSQL/PostGIS as Data Base Management System (DBMS). The approach has been designed, developed and successfully tested in the management of GIS-based navigation of an autonomous robot, both to map its trajectories and to assign optimal paths. This paper presents the application of our system to a simulated hydrological event that could interest the province of Catania, in Sicily. In particular, assuming that more teams draw up an inventory of the damage, we highlight the benefits of real-time transmission of the information collected from the field to headquarters.

Developing geospatial thinking and the science practices of investigation and evalutation with geographic information systems

NASA Astrophysics Data System (ADS)

Hamilton, Kelli

Geospatial thinking is a subset of spatial thinking, which has been identified by the National Geography Standards as an essential skill for students to gain through geography instruction (Heffron & Downs, 2013). One tool which has been shown to help students develop their geospatial thinking skills is Geographic Information Systems (GIS) (Kim & Bednraz, 2013; Lee & Bednarz, 2009; Patterson, 2007). Much of the research conducted with GIS has been in the context of social studies classrooms. This study examined the use of GIS with seventh grade students in a science classroom. Results of this study indicate that students who use GIS as part of their science instruction are able to practice geospatial thinking skills. In addition, this study examined how GIS could be used to enhance the instruction of the science practices of investigation and evaluation. The Next Generation Science Standards identify certain science practices which students should experience as part of science instruction (NGSS Lead States, 2013). Among those practices are investigation and evaluation. Students in this study used GIS to investigate and evaluate scientific data. Both the teacher and the students were able to identify ways that GIS enhanced both the investigation and evaluation of data.

Cloud Computing and Its Applications in GIS

NASA Astrophysics Data System (ADS)

Kang, Cao

2011-12-01

Cloud computing is a novel computing paradigm that offers highly scalable and highly available distributed computing services. The objectives of this research are to: 1. analyze and understand cloud computing and its potential for GIS; 2. discover the feasibilities of migrating truly spatial GIS algorithms to distributed computing infrastructures; 3. explore a solution to host and serve large volumes of raster GIS data efficiently and speedily. These objectives thus form the basis for three professional articles. The first article is entitled "Cloud Computing and Its Applications in GIS". This paper introduces the concept, structure, and features of cloud computing. Features of cloud computing such as scalability, parallelization, and high availability make it a very capable computing paradigm. Unlike High Performance Computing (HPC), cloud computing uses inexpensive commodity computers. The uniform administration systems in cloud computing make it easier to use than GRID computing. Potential advantages of cloud-based GIS systems such as lower barrier to entry are consequently presented. Three cloud-based GIS system architectures are proposed: public cloud- based GIS systems, private cloud-based GIS systems and hybrid cloud-based GIS systems. Public cloud-based GIS systems provide the lowest entry barriers for users among these three architectures, but their advantages are offset by data security and privacy related issues. Private cloud-based GIS systems provide the best data protection, though they have the highest entry barriers. Hybrid cloud-based GIS systems provide a compromise between these extremes. The second article is entitled "A cloud computing algorithm for the calculation of Euclidian distance for raster GIS". Euclidean distance is a truly spatial GIS algorithm. Classical algorithms such as the pushbroom and growth ring techniques require computational propagation through the entire raster image, which makes it incompatible with the distributed nature of cloud computing. This paper presents a parallel Euclidean distance algorithm that works seamlessly with the distributed nature of cloud computing infrastructures. The mechanism of this algorithm is to subdivide a raster image into sub-images and wrap them with a one pixel deep edge layer of individually computed distance information. Each sub-image is then processed by a separate node, after which the resulting sub-images are reassembled into the final output. It is shown that while any rectangular sub-image shape can be used, those approximating squares are computationally optimal. This study also serves as a demonstration of this subdivide and layer-wrap strategy, which would enable the migration of many truly spatial GIS algorithms to cloud computing infrastructures. However, this research also indicates that certain spatial GIS algorithms such as cost distance cannot be migrated by adopting this mechanism, which presents significant challenges for the development of cloud-based GIS systems. The third article is entitled "A Distributed Storage Schema for Cloud Computing based Raster GIS Systems". This paper proposes a NoSQL Database Management System (NDDBMS) based raster GIS data storage schema. NDDBMS has good scalability and is able to use distributed commodity computers, which make it superior to Relational Database Management Systems (RDBMS) in a cloud computing environment. In order to provide optimized data service performance, the proposed storage schema analyzes the nature of commonly used raster GIS data sets. It discriminates two categories of commonly used data sets, and then designs corresponding data storage models for both categories. As a result, the proposed storage schema is capable of hosting and serving enormous volumes of raster GIS data speedily and efficiently on cloud computing infrastructures. In addition, the scheme also takes advantage of the data compression characteristics of Quadtrees, thus promoting efficient data storage. Through this assessment of cloud computing technology, the exploration of the challenges and solutions to the migration of GIS algorithms to cloud computing infrastructures, and the examination of strategies for serving large amounts of GIS data in a cloud computing infrastructure, this dissertation lends support to the feasibility of building a cloud-based GIS system. However, there are still challenges that need to be addressed before a full-scale functional cloud-based GIS system can be successfully implemented. (Abstract shortened by UMI.)

Modelling optimal location for pre-hospital helicopter emergency medical services.

PubMed

Schuurman, Nadine; Bell, Nathaniel J; L'Heureux, Randy; Hameed, Syed M

2009-05-09

Increasing the range and scope of early activation/auto launch helicopter emergency medical services (HEMS) may alleviate unnecessary injury mortality that disproportionately affects rural populations. To date, attempts to develop a quantitative framework for the optimal location of HEMS facilities have been absent. Our analysis used five years of critical care data from tertiary health care facilities, spatial data on origin of transport and accurate road travel time catchments for tertiary centres. A location optimization model was developed to identify where the expansion of HEMS would cover the greatest population among those currently underserved. The protocol was developed using geographic information systems (GIS) to measure populations, distances and accessibility to services. Our model determined Royal Inland Hospital (RIH) was the optimal site for an expanded HEMS - based on denominator population, distance to services and historical usage patterns. GIS based protocols for location of emergency medical resources can provide supportive evidence for allocation decisions - especially when resources are limited. In this study, we were able to demonstrate conclusively that a logical choice exists for location of additional HEMS. This protocol could be extended to location analysis for other emergency and health services.

pLog enterprise-enterprise GIS-based geotechnical data management system enhancements.

DOT National Transportation Integrated Search

2015-12-01

Recent eorts by the Louisiana Department of Transportation and Development (DOTD) and the : Louisiana Transportation Research Center (LTRC) have developed a Geotechnical Information : Database, with a Geographic Information System (GIS) interface....

Feasibility of Close-Range Photogrammetric Models for Geographic Information System

DOE Office of Scientific and Technical Information (OSTI.GOV)

Zhou, Luke; /Rice U.

2011-06-22

The objective of this project was to determine the feasibility of using close-range architectural photogrammetry as an alternative three dimensional modeling technique in order to place the digital models in a geographic information system (GIS) at SLAC. With the available equipment and Australis photogrammetry software, the creation of full and accurate models of an example building, Building 281 on SLAC campus, was attempted. After conducting several equipment tests to determine the precision achievable, a complete photogrammetric survey was attempted. The dimensions of the resulting models were then compared against the true dimensions of the building. A complete building model wasmore » not evidenced to be obtainable using the current equipment and software. This failure was likely attributable to the limits of the software rather than the precision of the physical equipment. However, partial models of the building were shown to be accurate and determined to still be usable in a GIS. With further development of the photogrammetric software and survey procedure, the desired generation of a complete three dimensional model is likely still feasible.« less

An integrated GIS-based data model for multimodal urban public transportation analysis and management

NASA Astrophysics Data System (ADS)

Chen, Shaopei; Tan, Jianjun; Ray, C.; Claramunt, C.; Sun, Qinqin

2008-10-01

Diversity is one of the main characteristics of transportation data collected from multiple sources or formats, which can be extremely complex and disparate. Moreover, these multimodal transportation data are usually characterised by spatial and temporal properties. Multimodal transportation network data modelling involves both an engineering and research domain that has attracted the design of a number of spatio-temporal data models in the geographic information system (GIS). However, the application of these specific models to multimodal transportation network is still a challenging task. This research addresses this challenge from both integrated multimodal data organization and object-oriented modelling perspectives, that is, how a complex urban transportation network should be organized, represented and modeled appropriately when considering a multimodal point of view, and using object-oriented modelling method. We proposed an integrated GIS-based data model for multimodal urban transportation network that lays a foundation to enhance the multimodal transportation network analysis and management. This modelling method organizes and integrates multimodal transit network data, and supports multiple representations for spatio-temporal objects and relationship as both visual and graphic views. The data model is expressed by using a spatio-temporal object-oriented modelling method, i.e., the unified modelling language (UML) extended to spatial and temporal plug-in for visual languages (PVLs), which provides an essential support to the spatio-temporal data modelling for transportation GIS.

Land Use Planning Exercise Using Geographic Information Systems and Digital Soil Surveys

ERIC Educational Resources Information Center

Stout, Heidi M.; Lee, Brad D.

2004-01-01

Geographic information system (GIS) technology has become a valuable tool for environmental science professionals. By incorporating GIS into college-level course curricula, agricultural students become better qualified for employment opportunities. We have developed a case study-based laboratory exercise that introduces students to GIS and the…

MOICC and GIS: An Impact Study. Final Evaluation Report.

ERIC Educational Resources Information Center

Ryan, Charles W.; Drummond, Robert J.

The Guidance Information System (GIS) is a statewide computer-based career information system developed by the Maine Occupational Information Coordinating Committee (MOICC). A time-series design was utilized to investigate the impact of GIS on selected users in public schools and agencies. Participants completed questionnaires immediately after…

Data Driven Program Planning for GIS Instruction

ERIC Educational Resources Information Center

Scarletto, Edith

2013-01-01

This study used both focus groups (qualitative) and survey data (quantitative) to develop and expand an instruction program for GIS services. It examined the needs and preferences faculty and graduate students have for learning about GIS applications for teaching and research. While faculty preferred in person workshops and graduate students…

Students Individual Engagement in GIS

ERIC Educational Resources Information Center

Madsen, Lene Møller; Christiansen, Frederik; Rump, Camilla

2014-01-01

This paper develops two sets of concepts to theorize why students engage differently in Geographical Information Systems (GIS). These theoretical concepts are used as an analytical lens to explore empirical data on the experiences and engagement of students enrolled in an undergraduate GIS course in planning and management. The analysis shows that…

Call for an Agenda and Center for GIS Education Research

ERIC Educational Resources Information Center

Baker, Thomas R.; Kerski, Joseph J.; Huynh, Niem Tu; Viehrig, Kathrin; Bednarz, Sarah W.

2012-01-01

Despite nearly 20 years of intensive investment by higher education, industry, primary and secondary teachers, youth and community leaders, government agencies, and non-profits organizations in Geographic Information Systems (GIS) in education around the world, a GIS education research agenda has yet to be developed. This paper provides a…

Digital soil map of the Ussuri River basin

NASA Astrophysics Data System (ADS)

Bugaets, A. N.; Pschenichnikova, N. F.; Tereshkina, A. A.; Krasnopeev, S. M.; Gartsman, B. I.; Golodnaya, O. M.; Oznobikhin, V. I.

2017-08-01

On the basis of digital soil, topographic, and geological maps; raster topography model; forestry materials; and literature data, the digital soil map of the Ussuri River basin (24400 km2) was created on a scale of 1: 100000. To digitize the initial paper-based maps and analyze the results, an ESRI ArcGIS Desktop (ArcEditor) v.10.1 (http://www.esri.com) and an open-code SAGA GIS v.2.3 (System for Automated Geoscientific Analyses, http://www.saga-gis.org) were used. The spatial distribution of soil areas on the obtained digital soil map is in agreement with modern cartographic data and the SRTM digital elevation model (SRTM DEM). The regional soil classification developed by G.I. Ivanov was used in the legend to the soil map. The names of soil units were also correlated with the names suggested in the modern Russian soil classification system. The major soil units on the map are at the soil subtypes that reflect the entire vertical spectrum of soils in the south of the Far East of Russia (Primorye region). These are mountainous tundra soils, podzolic soils, brown taiga soils, mountainous brown forest soils, bleached brown soils, meadow-brown soils, meadow gley soils, and floodplain soils). With the help of the spatial analysis function of GIS, the comparison of the particular characteristics of the soil cover with numerical characteristics of the topography, geological composition of catchments, and vegetation cover was performed.

Processing Uav and LIDAR Point Clouds in Grass GIS

NASA Astrophysics Data System (ADS)

Petras, V.; Petrasova, A.; Jeziorska, J.; Mitasova, H.

2016-06-01

Today's methods of acquiring Earth surface data, namely lidar and unmanned aerial vehicle (UAV) imagery, non-selectively collect or generate large amounts of points. Point clouds from different sources vary in their properties such as number of returns, density, or quality. We present a set of tools with applications for different types of points clouds obtained by a lidar scanner, structure from motion technique (SfM), and a low-cost 3D scanner. To take advantage of the vertical structure of multiple return lidar point clouds, we demonstrate tools to process them using 3D raster techniques which allow, for example, the development of custom vegetation classification methods. Dense point clouds obtained from UAV imagery, often containing redundant points, can be decimated using various techniques before further processing. We implemented and compared several decimation techniques in regard to their performance and the final digital surface model (DSM). Finally, we will describe the processing of a point cloud from a low-cost 3D scanner, namely Microsoft Kinect, and its application for interaction with physical models. All the presented tools are open source and integrated in GRASS GIS, a multi-purpose open source GIS with remote sensing capabilities. The tools integrate with other open source projects, specifically Point Data Abstraction Library (PDAL), Point Cloud Library (PCL), and OpenKinect libfreenect2 library to benefit from the open source point cloud ecosystem. The implementation in GRASS GIS ensures long term maintenance and reproducibility by the scientific community but also by the original authors themselves.

The FOSS GIS Workbench on the GFZ Load Sharing Facility compute cluster

NASA Astrophysics Data System (ADS)

Löwe, P.; Klump, J.; Thaler, J.

2012-04-01

Compute clusters can be used as GIS workbenches, their wealth of resources allow us to take on geocomputation tasks which exceed the limitations of smaller systems. To harness these capabilities requires a Geographic Information System (GIS), able to utilize the available cluster configuration/architecture and a sufficient degree of user friendliness to allow for wide application. In this paper we report on the first successful porting of GRASS GIS, the oldest and largest Free Open Source (FOSS) GIS project, onto a compute cluster using Platform Computing's Load Sharing Facility (LSF). In 2008, GRASS6.3 was installed on the GFZ compute cluster, which at that time comprised 32 nodes. The interaction with the GIS was limited to the command line interface, which required further development to encapsulate the GRASS GIS business layer to facilitate its use by users not familiar with GRASS GIS. During the summer of 2011, multiple versions of GRASS GIS (v 6.4, 6.5 and 7.0) were installed on the upgraded GFZ compute cluster, now consisting of 234 nodes with 480 CPUs providing 3084 cores. The GFZ compute cluster currently offers 19 different processing queues with varying hardware capabilities and priorities, allowing for fine-grained scheduling and load balancing. After successful testing of core GIS functionalities, including the graphical user interface, mechanisms were developed to deploy scripted geocomputation tasks onto dedicated processing queues. The mechanisms are based on earlier work by NETELER et al. (2008). A first application of the new GIS functionality was the generation of maps of simulated tsunamis in the Mediterranean Sea for the Tsunami Atlas of the FP-7 TRIDEC Project (www.tridec-online.eu). For this, up to 500 processing nodes were used in parallel. Further trials included the processing of geometrically complex problems, requiring significant amounts of processing time. The GIS cluster successfully completed all these tasks, with processing times lasting up to full 20 CPU days. The deployment of GRASS GIS on a compute cluster allows our users to tackle GIS tasks previously out of reach of single workstations. In addition, this GRASS GIS cluster implementation will be made available to other users at GFZ in the course of 2012. It will thus become a research utility in the sense of "Software as a Service" (SaaS) and can be seen as our first step towards building a GFZ corporate cloud service.

Simulation and Evaluation of Low Impact Development of Urban Residential District Based on SWMM and GIS

NASA Astrophysics Data System (ADS)

Huang, Tielan; Wang, Yunpeng; Zhang, Jinlan

2017-07-01

In this study, simulation and evaluation of low impact development in resident district was carried out based on Storm Water Management Model (SWMM) and GIS method. In the evaluation model, we added 3 kinds of low impact development facilities, namely permeable pavement, rainwater garden, and green roof. These facilities are used alone or in combination. The model was run under five different rainfall reappearing periods. The simulation results using low impact development facilities were compared with simulation results under the current situation and undeveloped state. The results show that the total amount of runoff was greatly reduced by using various types of low impact development facilities in the urban residential district. The maximum reduction rate was using permeable pavement, reached 29.9%, followed was using rainwater garden, and the worst was using green roof. The lowest cost of reduction of the total amount of runoff was using permeable pavement, the followed was using rainwater garden, and the highest was using green roof. The combination scheme of various low impact development facilities has the highest efficiency of reducing total amount of runoff, and the lowest cost, which considering of the actual situation of the study area. The study indicated that application of low impact development facilities can reduce surface runoff effectively, which should be a useful way for prevention of urban waterlogging.

Quantitative modeling of soil genesis processes

NASA Technical Reports Server (NTRS)

Levine, E. R.; Knox, R. G.; Kerber, A. G.

1992-01-01

For fine spatial scale simulation, a model is being developed to predict changes in properties over short-, meso-, and long-term time scales within horizons of a given soil profile. Processes that control these changes can be grouped into five major process clusters: (1) abiotic chemical reactions; (2) activities of organisms; (3) energy balance and water phase transitions; (4) hydrologic flows; and (5) particle redistribution. Landscape modeling of soil development is possible using digitized soil maps associated with quantitative soil attribute data in a geographic information system (GIS) framework to which simulation models are applied.

A GIS-BASED MODAL MODEL OF AUTOMOBILE EXHAUST EMISSIONS

EPA Science Inventory

The report presents progress toward the development of a computer tool called MEASURE, the Mobile Emission Assessment System for Urban and Regional Evaluation. The tool works toward a goal of providing researchers and planners with a way to assess new mobile emission mitigation s...

Possibilities of GIS for Plant Introduction

USDA-ARS?s Scientific Manuscript database

The Ecological Atlas of Russia and Neighboring Countries was used to predict the distribution of introduced species. Acer negundo was used as an example and an ecological model was developed using the natural distribution of the species in North America and some American ecological variables: namely...

Linking Data Access to Data Models to Applications: The Estuary Data Mapper

EPA Science Inventory

The U.S. Environmental Protection Agency (US EPA) is developing e-Estuary, a decision-support system for coastal management. E-Estuary has three elements: an estuarine geo-referenced relational database, watershed GIS coverages, and tools to support decision-making. To facilita...

Land cover change detection using a GIS-guided, feature-based classification of Landsat thematic mapper data. [Geographic Information System

NASA Technical Reports Server (NTRS)

Enslin, William R.; Ton, Jezching; Jain, Anil

1987-01-01

Landsat TM data were combined with land cover and planimetric data layers contained in the State of Michigan's geographic information system (GIS) to identify changes in forestlands, specifically new oil/gas wells. A GIS-guided feature-based classification method was developed. The regions extracted by the best image band/operator combination were studied using a set of rules based on the characteristics of the GIS oil/gas pads.

Application of MODFLOW and geographic information system to groundwater flow simulation in North China Plain, China

NASA Astrophysics Data System (ADS)

Wang, Shiqin; Shao, Jingli; Song, Xianfang; Zhang, Yongbo; Huo, Zhibin; Zhou, Xiaoyuan

2008-10-01

MODFLOW is a groundwater modeling program. It can be compiled and remedied according to the practical applications. Because of its structure and fixed data format, MODFLOW can be integrated with Geographic Information Systems (GIS) technology for water resource management. The North China Plain (NCP), which is the politic, economic and cultural center of China, is facing with water resources shortage and water pollution. Groundwater is the main water resource for industrial, agricultural and domestic usage. It is necessary to evaluate the groundwater resources of the NCP as an entire aquifer system. With the development of computer and internet information technology it is also necessary to integrate the groundwater model with the GIS technology. Because the geological and hydrogeological data in the NCP was mainly in MAPGIS format, the powerful function of GIS of disposing of and analyzing spatial data and computer languages such as Visual C and Visual Basic were used to define the relationship between the original data and model data. After analyzing the geological and hydrogeological conditions of the NCP, the groundwater flow numerical simulation modeling was constructed with MODFLOW. On the basis of GIS, a dynamic evaluation system for groundwater resources under the internet circumstance was completed. During the process of constructing the groundwater model, a water budget was analyzed, which showed a negative budget in the NCP. The simulation period was from 1 January 2002 to 31 December 2003. During this period, the total recharge of the groundwater system was 49,374 × 106 m3 and the total discharge was 56,530 × 106 m3 the budget deficit was -7,156 × 106 m3. In this integrated system, the original data including graphs and attribution data could be stored in the database. When the process of evaluating and predicting groundwater flow was started, these data were transformed into files that the core program of MODFLOW could read. The calculated water level and drawdown could be displayed and reviewed online.

Mapping and Analysis of Forest and Land Fire Potential Using Geospatial Technology and Mathematical Modeling

NASA Astrophysics Data System (ADS)

Suliman, M. D. H.; Mahmud, M.; Reba, M. N. M.; S, L. W.

2014-02-01

Forest and land fire can cause negative implications for forest ecosystems, biodiversity, air quality and soil structure. However, the implications involved can be minimized through effective disaster management system. Effective disaster management mechanisms can be developed through appropriate early warning system as well as an efficient delivery system. This study tried to focus on two aspects, namely by mapping the potential of forest fire and land as well as the delivery of information to users through WebGIS application. Geospatial technology and mathematical modeling used in this study for identifying, classifying and mapping the potential area for burning. Mathematical models used is the Analytical Hierarchy Process (AHP), while Geospatial technologies involved include remote sensing, Geographic Information System (GIS) and digital field data collection. The entire Selangor state was chosen as our study area based on a number of cases have been reported over the last two decades. AHP modeling to assess the comparison between the three main criteria of fuel, topography and human factors design. Contributions of experts directly involved in forest fire fighting operations and land comprising officials from the Fire and Rescue Department Malaysia also evaluated in this model. The study found that about 32.83 square kilometers of the total area of Selangor state are the extreme potential for fire. Extreme potential areas identified are in Bestari Jaya and Kuala Langat High Ulu. Continuity of information and terrestrial forest fire potential was displayed in WebGIS applications on the internet. Display information through WebGIS applications is a better approach to help the decision-making process at a high level of confidence and approximate real conditions. Agencies involved in disaster management such as Jawatankuasa Pengurusan Dan Bantuan Bencana (JPBB) of District, State and the National under the National Security Division and the Fire and Rescue Department Malaysia can use the end result of this study in preparation for the land and forest fires in the future.

GeoMEx: Geographic Information System (GIS) Prototype for Mars Express Data

NASA Astrophysics Data System (ADS)

Manaud, N.; Frigeri, A.; Ivanov, A. B.

2013-09-01

As of today almost a decade of observational data have been returned by the multidisciplinary instruments on-board the ESA's Mars Express spacecraft. All data are archived into the ESA's Planetary Science Archive (PSA), which is the central repository for all ESA's Solar System missions [1]. Data users can perform advanced queries and retrieve data from the PSA using graphical and map-based search interfaces, or via direct FTP download [2]. However the PSA still offers limited geometrical search and visualisation capabilities that are essential for scientists to identify their data of interest. A former study has shown [3] that this limitation is mostly due to the fact that (1) only a subset of the instruments observations geometry information has been modeled and ingested into the PSA, and (2) that the access to that information from GIS software is impossible without going through a cumbersome and undocumented process. With the increasing number of Mars GIS data sets available to the community [4], GIS software have become invaluable tools for researchers to capture, manage, visualise, and analyse data from various sources. Although Mars Express surface imaging data are natural candidates for use in a GIS environment, other non-imaging instruments data (subsurface, atmosphere, plasma) integration is being investigated [5]. The objective of this work is to develop a GIS prototype that will integrate all the Mars Express instruments observations geometry information into a spatial database that can be accessed from external GIS software using standard WMS and WFS protocols. We will firstly focus on the integration of surface and subsurface instruments data (HRSC, OMEGA, MARSIS). In addition to the geometry information, base and context maps of Mars derived from surface mapping instruments data will also be ingested into the system. The system back-end architecture will be implemented using open-source GIS frameworks: PostgreSQL/PostGIS for the database, and MapServer for the web publishing module. Interfaces with existing GIS front-end software (such as QGIS, GRASS, ArcView, or OpenLayers) will be investigated and tested in a second phase. This prototype is primarily intended to be used by the Mars Express instruments teams in support to their scientific investigations. It will also be used by the mission Archive Scientist in support to the data validation and PSA interface requirements definition tasks. Depending on its success, this prototype might be used in the future to demonstrate the benefit of a GIS component integration to ESA's planetary science operations planning systems.

Study on Global GIS architecture and its key technologies

NASA Astrophysics Data System (ADS)

Cheng, Chengqi; Guan, Li; Lv, Xuefeng

2009-09-01

Global GIS (G2IS) is a system, which supports the huge data process and the global direct manipulation on global grid based on spheroid or ellipsoid surface. Based on global subdivision grid (GSG), Global GIS architecture is presented in this paper, taking advantage of computer cluster theory, the space-time integration technology and the virtual reality technology. Global GIS system architecture is composed of five layers, including data storage layer, data representation layer, network and cluster layer, data management layer and data application layer. Thereinto, it is designed that functions of four-level protocol framework and three-layer data management pattern of Global GIS based on organization, management and publication of spatial information in this architecture. Three kinds of core supportive technologies, which are computer cluster theory, the space-time integration technology and the virtual reality technology, and its application pattern in the Global GIS are introduced in detail. The primary ideas of Global GIS in this paper will be an important development tendency of GIS.

Study on Global GIS architecture and its key technologies

NASA Astrophysics Data System (ADS)

Cheng, Chengqi; Guan, Li; Lv, Xuefeng

2010-11-01

Global GIS (G2IS) is a system, which supports the huge data process and the global direct manipulation on global grid based on spheroid or ellipsoid surface. Based on global subdivision grid (GSG), Global GIS architecture is presented in this paper, taking advantage of computer cluster theory, the space-time integration technology and the virtual reality technology. Global GIS system architecture is composed of five layers, including data storage layer, data representation layer, network and cluster layer, data management layer and data application layer. Thereinto, it is designed that functions of four-level protocol framework and three-layer data management pattern of Global GIS based on organization, management and publication of spatial information in this architecture. Three kinds of core supportive technologies, which are computer cluster theory, the space-time integration technology and the virtual reality technology, and its application pattern in the Global GIS are introduced in detail. The primary ideas of Global GIS in this paper will be an important development tendency of GIS.

Secondary GIS built environment data for health research: guidance for data development

PubMed Central

Stewart, Orion T.; Carlos, Heather A.; Lee, Chanam; Berke, Ethan M.; Hurvitz, Philip M.; Li, Li; Moudon, Anne Vernez; Doescher, Mark P.

2016-01-01

Built environment (BE) data in geographic information system (GIS) format are increasingly available from public agencies and private providers. These data can provide objective, low-cost BE data over large regions and are often used in public health research and surveillance. Yet challenges exist in repurposing GIS data for health research. The GIS data do not always capture desired constructs; the data can be of varying quality and completeness; and the data definitions, structures, and spatial representations are often inconsistent across sources. Using the Small Town Walkability study as an illustration, we describe (a) the range of BE characteristics measurable in a GIS that may be associated with active living, (b) the availability of these data across nine U.S. small towns, (c) inconsistencies in the GIS BE data that were available, and (d) strategies for developing accurate, complete, and consistent GIS BE data appropriate for research. Based on a conceptual framework and existing literature, objectively measurable characteristics of the BE potentially related to active living were classified under nine domains: generalized land uses, morphology, density, destinations, transportation system, traffic conditions, neighborhood behavioral conditions, economic environment, and regional location. At least some secondary GIS data were available across all nine towns for seven of the nine BE domains. Data representing high-resolution or behavioral aspects of the BE were often not available. Available GIS BE data - especially tax parcel data - often contained varying attributes and levels of detail across sources. When GIS BE data were available from multiple sources, the accuracy, completeness, and consistency of the data could be reasonable ensured for use in research. But this required careful attention to the definition and spatial representation of the BE characteristic of interest. Manipulation of the secondary source data was often required, which was facilitated through protocols. PMID:28459001

Secondary GIS built environment data for health research: guidance for data development.

PubMed

Stewart, Orion T; Carlos, Heather A; Lee, Chanam; Berke, Ethan M; Hurvitz, Philip M; Li, Li; Moudon, Anne Vernez; Doescher, Mark P

2016-12-01

Built environment (BE) data in geographic information system (GIS) format are increasingly available from public agencies and private providers. These data can provide objective, low-cost BE data over large regions and are often used in public health research and surveillance. Yet challenges exist in repurposing GIS data for health research. The GIS data do not always capture desired constructs; the data can be of varying quality and completeness; and the data definitions, structures, and spatial representations are often inconsistent across sources. Using the Small Town Walkability study as an illustration, we describe (a) the range of BE characteristics measurable in a GIS that may be associated with active living, (b) the availability of these data across nine U.S. small towns, (c) inconsistencies in the GIS BE data that were available, and (d) strategies for developing accurate, complete, and consistent GIS BE data appropriate for research. Based on a conceptual framework and existing literature, objectively measurable characteristics of the BE potentially related to active living were classified under nine domains: generalized land uses, morphology, density, destinations, transportation system, traffic conditions, neighborhood behavioral conditions, economic environment, and regional location. At least some secondary GIS data were available across all nine towns for seven of the nine BE domains. Data representing high-resolution or behavioral aspects of the BE were often not available. Available GIS BE data - especially tax parcel data - often contained varying attributes and levels of detail across sources. When GIS BE data were available from multiple sources, the accuracy, completeness, and consistency of the data could be reasonable ensured for use in research. But this required careful attention to the definition and spatial representation of the BE characteristic of interest. Manipulation of the secondary source data was often required, which was facilitated through protocols.

GenGIS 2: Geospatial Analysis of Traditional and Genetic Biodiversity, with New Gradient Algorithms and an Extensible Plugin Framework

PubMed Central

Parks, Donovan H.; Mankowski, Timothy; Zangooei, Somayyeh; Porter, Michael S.; Armanini, David G.; Baird, Donald J.; Langille, Morgan G. I.; Beiko, Robert G.

2013-01-01

GenGIS is free and open source software designed to integrate biodiversity data with a digital map and information about geography and habitat. While originally developed with microbial community analyses and phylogeography in mind, GenGIS has been applied to a wide range of datasets. A key feature of GenGIS is the ability to test geographic axes that can correspond to routes of migration or gradients that influence community similarity. Here we introduce GenGIS version 2, which extends the linear gradient tests introduced in the first version to allow comprehensive testing of all possible linear geographic axes. GenGIS v2 also includes a new plugin framework that supports the development and use of graphically driven analysis packages: initial plugins include implementations of linear regression and the Mantel test, calculations of alpha-diversity (e.g., Shannon Index) for all samples, and geographic visualizations of dissimilarity matrices. We have also implemented a recently published method for biomonitoring reference condition analysis (RCA), which compares observed species richness and diversity to predicted values to determine whether a given site has been impacted. The newest version of GenGIS supports vector data in addition to raster files. We demonstrate the new features of GenGIS by performing a full gradient analysis of an Australian kangaroo apple data set, by using plugins and embedded statistical commands to analyze human microbiome sample data, and by applying RCA to a set of samples from Atlantic Canada. GenGIS release versions, tutorials and documentation are freely available at http://kiwi.cs.dal.ca/GenGIS, and source code is available at https://github.com/beiko-lab/gengis. PMID:23922841

From Excavations to Web: a GIS for Archaeology

NASA Astrophysics Data System (ADS)

D'Urso, M. G.; Corsi, E.; Nemeti, S.; Germani, M.

2017-05-01

The study and the protection of Cultural Heritage in recent years have undergone a revolution about the search tools and the reference disciplines. The technological approach to the problem of the collection, organization and publication of archaeological data using GIS software has completely changed the essence of the traditional methods of investigation, paving the way to the development of several application areas, up to the Cultural Resource Management. A relatively recent specific sector of development for archaeological GIS development sector is dedicated to the intra - site analyses aimed to recording, processing and display information obtained during the excavations. The case - study of the archaeological site located in the south - east of San Pietro Vetere plateau in Aquino, in the Southern Lazio, is concerned with the illustration of a procedure describing the complete digital workflow relative to an intra-site analysis of an archaeological dig. The GIS project implementation and its publication on the web, thanks to several softwares, particularly the FOSS (Free Open Source Software) Quantum - GIS, are an opportunity to reflect on the strengths and the critical nature of this particular application of the GIS technology. For future developments in research it is of fundamental importance the identification of a digital protocol for processing of excavations (from the acquisition, cataloguing, up data insertion), also on account of a possible future Open Project on medieval Aquino.

Development of a forestry government agency enterprise GIS system: a disconnected editing approach

NASA Astrophysics Data System (ADS)

Zhu, Jin; Barber, Brad L.

2008-10-01

The Texas Forest Service (TFS) has developed a geographic information system (GIS) for use by agency personnel in central Texas for managing oak wilt suppression and other landowner assistance programs. This Enterprise GIS system was designed to support multiple concurrent users accessing shared information resources. The disconnected editing approach was adopted in this system to avoid the overhead of maintaining an active connection between TFS central Texas field offices and headquarters since most field offices are operating with commercially provided Internet service. The GIS system entails maintaining a personal geodatabase on each local field office computer. Spatial data from the field is periodically up-loaded into a central master geodatabase stored in a Microsoft SQL Server at the TFS headquarters in College Station through the ESRI Spatial Database Engine (SDE). This GIS allows users to work off-line when editing data and requires connecting to the central geodatabase only when needed.

Design and Development of Countylevel Information Management System for Diseases and Pests of Hebei Province on GIS

NASA Astrophysics Data System (ADS)

Cheng, Xiaoyan; Zhang, Xiaoli; Xie, Fangyi

To get a more convenience work in forest application, GIS and information system is used in forestry. GIS technology is used to build an informational management system of forest disease. For the practical requirement, the system is implemented by PDA which works outside to help completing the data collection. The major function of the system is input and output of the forest disease data and processing the report which is based on the criteria report and the assistant function of GIS. This article is aim to discuss about the theory, the process and the critical points of the information system. Besides the general information management system, GIS and PDA is introduced into the diseases system, which could combine the map and the attribute information and realize inventory data reform by PDA. The system is developed with VB and SuperMap Object (SuperMap Company).

Mineral resources management based on GIS and RS: a case study of the Laozhaiwan Gold Mine

NASA Astrophysics Data System (ADS)

Wu, Hao; Hua, Xianghong; Wang, Xinzhou; Ma, Liguang; Yuan, Yanbin

2005-10-01

With the development of digital information technology in mining industry, the concept of DM (Digital Mining) and MGIS (Mining Geographical Information System) are becoming the research focus but not perfect. How to effectively manage the dataset of geological, surveying and mineral products grade is the key point that concerned the sustainable development and standardized management in mining industry. Based on the existing combined GIS and remote sensing technology, we propose a model named DMMIS (Digital Mining Management Information System), which is composed of the database layer, the ActiveX layer and the user interface layer. The system is used in Laozhaiwan Gold Mine, Yunnan Province of China, which is shown to demonstrate the feasibility of the research and development achievement stated in this paper. Finally, some conclusions and constructive advices for future research work are given.

Minnehaha Creek Watershed SWMM5 Model Data Analysis and Future Recommendations

DTIC Science & Technology

2013-07-01

comprehensive inventory of data inconsistencies without a source data inventory. To solve this problem, MCWD needs to develop a detailed, georeferenced, GIS...LMCW models, USACE recommends that MCWD keep the SWMM5 models separated instead of combining them into one comprehensive SWMM5 model for the entire...SWMM5 geometry. SWMM5 offers three routing methods: steady flow, kinematic wave, and dynamic wave. Each method offers advantages and disadvantages and

Three dimensional display of underground water-supplying network by combining VTK with SiCAD/open GIS system

NASA Astrophysics Data System (ADS)

Chen, Shaobin; Zhang, Xubo; Wang, Wenyuan; Zhou, Chengping; Ding, Mingyue

2007-11-01

Nowadays many Geographic Information System (GIS) have been widely used in many municipal corporations. Water-supplying corporations in many cities developed GIS application system based on SiCAD/Open GIS platform several years ago for their daily management and engineering construction. With the increasing of commercial business, many corporations now need to add the functionality of three dimensional to display to their GIS System without too much financial cost. Because of the expensiveness of updating SiCAD/Open GIS system to the up-to-date version, the introduction of a third-part 3D display technology is considered. In our solution, Visualization Toolkit (VTK) is used to achieve three dimensional display of underground water-supplying network on the basis of an existing SiCAD/Open GIS system. This paper addresses on the system architecture and key implementation technologies of this solution.

Land-use evaluation for sustainable construction in a protected area: A case of Sara mountain national park.

PubMed

Ristić, Vladica; Maksin, Marija; Nenković-Riznić, Marina; Basarić, Jelena

2018-01-15

The process of making decisions on sustainable development and construction begins in spatial and urban planning when defining the suitability of using land for sustainable construction in a protected area (PA) and its immediate and regional surroundings. The aim of this research is to propose and assess a model for evaluating land-use suitability for sustainable construction in a PA and its surroundings. The methodological approach of Multi-Criteria Decision Analysis was used in the formation of this model and adapted for the research; it was combined with the adapted Analytical hierarchy process and the Delphi process, and supported by a geographical information system (GIS) within the framework of ESRI ArcGIS software - Spatial analyst. The model is applied to the case study of Sara mountain National Park in Kosovo. The result of the model is a "map of integrated assessment of land-use suitability for sustainable construction in a PA for the natural factor". Copyright © 2017 Elsevier Ltd. All rights reserved.

Exchanging transportation networks between two GISs via the SDTS

DOT National Transportation Integrated Search

1997-05-01

Performing meaningful network analyses is greatly dependent upon accurate and : complete transportation network models, which are digitized into a Geographic : Information System (GIS) or, more often, imported from another GIS. : Transportation netwo...

Prediction of wood Quality in Small-Diameter Douglas-Fir using site and Stand Characteristics

Treesearch

C.D. Morrow; T.M. Gorman; J.W. Evans; D.E. Kretschmann; C.A. Hatfield

2013-01-01

Standing stress wave measurements were taken on 274 small-diameter Douglas-fir trees in western Montana. Stand, site, and soil measurements collected in the field and remotely through geographical information system (GIS) data layers were used to model dynamic modulus of elasticity (DMOE) in those trees. The best fit linear model developed resulted in an adjusted

Modeling forest ecosystem changes resulting from surface coal mining in West Virginia

Treesearch

John Brown; Andrew J. Lister; Mary Ann Fajvan; Bonnie Ruefenacht; Christine Mazzarella

2012-01-01

The objective of this project is to assess the effects of surface coal mining on forest ecosystem disturbance and restoration in the Coal River Subbasin in southern West Virginia. Our approach is to develop disturbance impact models for this subbasin that will serve as a case study for testing the feasibility of integrating currently available GIS data layers, remote...

Providing open-access online materials and hands-on sessions for GIS exercises

NASA Astrophysics Data System (ADS)

Oguchi, T.; Yamauchi, H.; Hayakawa, Y. S.

2017-12-01

Researchers of GIS (Geographical Information Systems/Sciences) in Japan have collaborated to provide materials for GIS lecture classes in universities for the last 20 years. The major outcomes include 1) a GIS core curriculum, 2) a GIS "body of knowledge" explaining the details of the curriculum, 3) a series of PowerPoint presentations, and 4) a comprehensive GIS textbook. However, materials for GIS exercises at university classes using GIS software have been limited in Japan. Therefore, we launched a project to provide such materials which will be available online and accessible by anybody. The materials cover broad basic aspects of GIS including geoscientific applications such as terrain analysis using digital elevation models. The materials utilize public-domain and open-source software packages such as QGIS and GRASS. The data used are also freely available ones such as those from the Geospatial Information Authority of Japan. The use of the GitHub platform to distribute the materials allow easier online interactions by both material producers and users. Selected sets of the materials have been utilized for hands-on activities including both official university classes and public instructions. We have been updating the materials based on the opinions of people who took the hands-on courses for better GIS education. The current materials are in Japanese, but we plan to translate some of them into English.

Visualizing Opportunities: GIS Skills for Retail Marketing

ERIC Educational Resources Information Center

Wu, Peter Y.; Rathswohl, Eugene

2011-01-01

Business students need to develop skills in the intelligent use of information, especially spatial information, for decision-making. Geographic Information System (GIS) is a viable tool for that purpose. Yet the few GIS courses in the Information Systems curriculum offered in various business schools tend to focus on different concepts and skills.…

ArcAtlas in the Classroom: Pattern Identification, Description, and Explanation

ERIC Educational Resources Information Center

DeMers, Michael N.; Vincent, Jeffrey S.

2007-01-01

The use of geographic information systems (GIS) in the classroom provides a robust and effective method of teaching the primary spatial skills of identification, description, and explanation of spatial pattern. A major handicap for the development of GIS-based learning experiences, especially for non-GIS specialist educators, is the availability…

A GIS-Enabled, Michigan-Specific, Hierarchical Groundwater Modeling and Visualization System

NASA Astrophysics Data System (ADS)

Liu, Q.; Li, S.; Mandle, R.; Simard, A.; Fisher, B.; Brown, E.; Ross, S.

2005-12-01

Efficient management of groundwater resources relies on a comprehensive database that represents the characteristics of the natural groundwater system as well as analysis and modeling tools to describe the impacts of decision alternatives. Many agencies in Michigan have spent several years compiling expensive and comprehensive surface water and groundwater inventories and other related spatial data that describe their respective areas of responsibility. However, most often this wealth of descriptive data has only been utilized for basic mapping purposes. The benefits from analyzing these data, using GIS analysis functions or externally developed analysis models or programs, has yet to be systematically realized. In this talk, we present a comprehensive software environment that allows Michigan groundwater resources managers and frontline professionals to make more effective use of the available data and improve their ability to manage and protect groundwater resources, address potential conflicts, design cleanup schemes, and prioritize investigation activities. In particular, we take advantage of the Interactive Ground Water (IGW) modeling system and convert it to a customized software environment specifically for analyzing, modeling, and visualizing the Michigan statewide groundwater database. The resulting Michigan IGW modeling system (IGW-M) is completely window-based, fully interactive, and seamlessly integrated with a GIS mapping engine. The system operates in real-time (on the fly) providing dynamic, hierarchical mapping, modeling, spatial analysis, and visualization. Specifically, IGW-M allows water resources and environmental professionals in Michigan to: * Access and utilize the extensive data from the statewide groundwater database, interactively manipulate GIS objects, and display and query the associated data and attributes; * Analyze and model the statewide groundwater database, interactively convert GIS objects into numerical model features, automatically extract data and attributes, and simulate unsteady groundwater flow and contaminant transport in response to water and land management decisions; * Visualize and map model simulations and predictions with data from the statewide groundwater database in a seamless interactive environment. IGW-M has the potential to significantly improve the productivity of Michigan groundwater management investigations. It changes the role of engineers and scientists in modeling and analyzing the statewide groundwater database from heavily physical to cognitive problem-solving and decision-making tasks. The seamless real-time integration, real-time visual interaction, and real-time processing capability allows a user to focus on critical management issues, conflicts, and constraints, to quickly and iteratively examine conceptual approximations, management and planning scenarios, and site characterization assumptions, to identify dominant processes, to evaluate data worth and sensitivity, and to guide further data-collection activities. We illustrate the power and effectiveness of the M-IGW modeling and visualization system with a real case study and a real-time, live demonstration.

Assessment of Managed Aquifer Recharge Site Suitability Using a GIS and Modeling.

PubMed

Russo, Tess A; Fisher, Andrew T; Lockwood, Brian S

2015-01-01

We completed a two-step regional analysis of a coastal groundwater basin to (1) assess regional suitability for managed aquifer recharge (MAR), and (2) quantify the relative impact of MAR activities on groundwater levels and sea water intrusion. The first step comprised an analysis of surface and subsurface hydrologic properties and conditions, using a geographic information system (GIS). Surface and subsurface data coverages were compiled, georeferenced, reclassified, and integrated (including novel approaches for combining related datasets) to derive a spatial distribution of MAR suitability values. In the second step, results from the GIS analysis were used with a regional groundwater model to assess the hydrologic impact of potential MAR placement and operating scenarios. For the region evaluated in this study, the Pajaro Valley Groundwater Basin, California, GIS results suggest that about 7% (15 km2) of the basin may be highly suitable for MAR. Modeling suggests that simulated MAR projects placed near the coast help to reduce sea water intrusion more rapidly, but these projects also result in increased groundwater flows to the ocean. In contrast, projects placed farther inland result in more long-term reduction in sea water intrusion and less groundwater flowing to the ocean. This work shows how combined GIS analysis and modeling can assist with regional water supply planning, including evaluation of options for enhancing groundwater resources. © 2014, National Ground Water Association.

A validation of ground ambulance pre-hospital times modeled using geographic information systems.

PubMed

Patel, Alka B; Waters, Nigel M; Blanchard, Ian E; Doig, Christopher J; Ghali, William A

2012-10-03

Evaluating geographic access to health services often requires determining the patient travel time to a specified service. For urgent care, many research studies have modeled patient pre-hospital time by ground emergency medical services (EMS) using geographic information systems (GIS). The purpose of this study was to determine if the modeling assumptions proposed through prior United States (US) studies are valid in a non-US context, and to use the resulting information to provide revised recommendations for modeling travel time using GIS in the absence of actual EMS trip data. The study sample contained all emergency adult patient trips within the Calgary area for 2006. Each record included four components of pre-hospital time (activation, response, on-scene and transport interval). The actual activation and on-scene intervals were compared with those used in published models. The transport interval was calculated within GIS using the Network Analyst extension of Esri ArcGIS 10.0 and the response interval was derived using previously established methods. These GIS derived transport and response intervals were compared with the actual times using descriptive methods. We used the information acquired through the analysis of the EMS trip data to create an updated model that could be used to estimate travel time in the absence of actual EMS trip records. There were 29,765 complete EMS records for scene locations inside the city and 529 outside. The actual median on-scene intervals were longer than the average previously reported by 7-8 minutes. Actual EMS pre-hospital times across our study area were significantly higher than the estimated times modeled using GIS and the original travel time assumptions. Our updated model, although still underestimating the total pre-hospital time, more accurately represents the true pre-hospital time in our study area. The widespread use of generalized EMS pre-hospital time assumptions based on US data may not be appropriate in a non-US context. The preference for researchers should be to use actual EMS trip records from the proposed research study area. In the absence of EMS trip data researchers should determine which modeling assumptions more accurately reflect the EMS protocols across their study area.

Utilizing environmental, socioeconomic data and GIS techniques to estimate the risk for ascariasis and trichuriasis in Minas Gerais, Brazil.

PubMed

Scholte, Ronaldo G C; Freitas, Corina C; Dutra, Luciano V; Guimaraes, Ricardo J P S; Drummond, Sandra C; Oliveira, Guilherme; Carvalho, Omar S

2012-02-01

The impact of intestinal helminths on human health is well known among the population and health authorities because of their wide geographic distribution and the serious problems they cause. Geohelminths are highly prevalent and have a big impact on public health, mainly in underdeveloped and developing countries. Geohelminths are responsible for the high levels of debility found in the younger population and are often related to cases of chronic diarrhea and malnutrition, which put the physical and intellectual development of children at risk. These geohelminths have not been sufficiently studied. One obstacle in implementing a control program is the lack of knowledge of the prevalence and geographical distribution. Geographical information systems (GIS) and remote sensing (RS) have been utilized to improve understanding of infectious disease distribution and climatic patterns. In this study, GIS and RS technologies, as well as meteorological, social, and environmental variables were utilized for the modeling and prediction of ascariasis and trichuriasis. The GIS and RS technologies specifically used were those produced by orbital sensing including the Moderate Resolution Imaging Spectroradiometer (MODIS) and the Shuttle Radar Topography Mission (SRTM). The results of this study demonstrated important factors related to the transmission of ascariasis and trichuriasis and confirmed the key association between environmental variables and the poverty index, which enabled us to identify priority areas for intervention planning in the state of Minas Gerais in Brazil. Copyright © 2011 Elsevier B.V. All rights reserved.

EVALUATING HYDROLOGICAL RESPONSE TO ...

EPA Pesticide Factsheets

Studies of future management and policy options based on different assumptions provide a mechanism to examine possible outcomes and especially their likely benefits or consequences. Planning and assessment in land and water resource management are evolving toward complex, spatially explicit regional assessments. These problems have to be addressed with distributed models that can compute runoff and erosion at different spatial and temporal scales. The extensive data requirements and the difficult task of building input parameter files, however, have long been an obstacle to the timely and cost-effective use of such complex models by resource managers. The U.S. EPA Landscape Ecology Branch in collaboration with the USDA-ARS Southwest Watershed Research Center has developed a geographic information system (GIS) tool to facilitate this process. A GIS provides the framework within which spatially distributed data are collected and used to prepare model input files, and model results are evaluated. The Automated Geospatial Watershed Assessment (AGWA) tool uses widely available standardized spatial datasets that can be obtained via the internet at no cost to the user. The data are used to develop input parameter files for KINEROS2 and SWAT, two watershed runoff and erosion simulation models that operate at different spatial and temporal scales. AGWA automates the process of transforming digital data into simulation model results and provides a visualization tool

Landslide susceptibility mapping using GIS-based statistical models and Remote sensing data in tropical environment

PubMed Central

Hashim, Mazlan

2015-01-01

This research presents the results of the GIS-based statistical models for generation of landslide susceptibility mapping using geographic information system (GIS) and remote-sensing data for Cameron Highlands area in Malaysia. Ten factors including slope, aspect, soil, lithology, NDVI, land cover, distance to drainage, precipitation, distance to fault, and distance to road were extracted from SAR data, SPOT 5 and WorldView-1 images. The relationships between the detected landslide locations and these ten related factors were identified by using GIS-based statistical models including analytical hierarchy process (AHP), weighted linear combination (WLC) and spatial multi-criteria evaluation (SMCE) models. The landslide inventory map which has a total of 92 landslide locations was created based on numerous resources such as digital aerial photographs, AIRSAR data, WorldView-1 images, and field surveys. Then, 80% of the landslide inventory was used for training the statistical models and the remaining 20% was used for validation purpose. The validation results using the Relative landslide density index (R-index) and Receiver operating characteristic (ROC) demonstrated that the SMCE model (accuracy is 96%) is better in prediction than AHP (accuracy is 91%) and WLC (accuracy is 89%) models. These landslide susceptibility maps would be useful for hazard mitigation purpose and regional planning. PMID:25898919

Landslide susceptibility mapping using GIS-based statistical models and Remote sensing data in tropical environment.

PubMed

Shahabi, Himan; Hashim, Mazlan

2015-04-22

This research presents the results of the GIS-based statistical models for generation of landslide susceptibility mapping using geographic information system (GIS) and remote-sensing data for Cameron Highlands area in Malaysia. Ten factors including slope, aspect, soil, lithology, NDVI, land cover, distance to drainage, precipitation, distance to fault, and distance to road were extracted from SAR data, SPOT 5 and WorldView-1 images. The relationships between the detected landslide locations and these ten related factors were identified by using GIS-based statistical models including analytical hierarchy process (AHP), weighted linear combination (WLC) and spatial multi-criteria evaluation (SMCE) models. The landslide inventory map which has a total of 92 landslide locations was created based on numerous resources such as digital aerial photographs, AIRSAR data, WorldView-1 images, and field surveys. Then, 80% of the landslide inventory was used for training the statistical models and the remaining 20% was used for validation purpose. The validation results using the Relative landslide density index (R-index) and Receiver operating characteristic (ROC) demonstrated that the SMCE model (accuracy is 96%) is better in prediction than AHP (accuracy is 91%) and WLC (accuracy is 89%) models. These landslide susceptibility maps would be useful for hazard mitigation purpose and regional planning.

Using Geographical Information Systems (GIS) as an instrument of water resource management: a case study from a GIS-based Water Safety Plan in Germany.

PubMed

Wienand, I; Nolting, U; Kistemann, T

2009-01-01

Following international developments and the new WHO Drinking Water Guidelines (WHO 2004) a process-orientated concept for risk, monitoring and incident management has been developed and implemented in this study. The concept will be reviewed with special consideration for resource protection (first barrier of the multi-barrier system) and in turn, for the Water Safety Plan (WSP) which adequately considers-beyond the current framework of legal requirements-possible new hygienic-microbiologically relevant risks (especially emerging pathogens) for the drinking water supply. The development of a WSP within the framework of risk, monitoring and incident management includes the application of Geographical Information Systems (GIS). In the present study, GIS was used for visualization and spatial analysis in decisive steps in the WSP. The detailed process of GIS-supported implementation included the identification of local participants and their tasks and interactions as an essential part of risk management. A detailed ecological investigation of drinking water conditions in the catchment area was conducted in addition to hazard identification, risk assessment and the monitoring of control measures. The main task of our study was to find out in which steps of the WSP the implementation of GIS could be integrated as a useful, and perhaps even an essential tool.

The impact of geographic information systems on emergency management decision making at the U.S. Department of Homeland Security

NASA Astrophysics Data System (ADS)

King, Steven Gray

Geographic information systems (GIS) reveal relationships and patterns from large quantities of diverse data in the form of maps and reports. The United States spends billions of dollars to use GIS to improve decisions made during responses to natural disasters and terrorist attacks, but precisely how GIS improves or impairs decision making is not known. This research examined how GIS affect decision making during natural disasters, and how GIS can be more effectively used to improve decision making for emergency management. Using a qualitative case study methodology, this research examined decision making at the U.S. Department of Homeland Security (DHS) during a large full-scale disaster exercise. This study indicates that GIS provided decision makers at DHS with an outstanding context for information that would otherwise be challenging to understand, especially through the integration of multiple data sources and dynamic three-dimensional interactive maps. Decision making was hampered by outdated information, a reliance on predictive models based on hypothetical data rather than actual event data, and a lack of understanding of the capabilities of GIS beyond cartography. Geospatial analysts, emergency managers, and other decision makers who use GIS should take specific steps to improve decision making based on GIS for disaster response and emergency management.

Teaching And Learning Tectonics With Web-GIS

NASA Astrophysics Data System (ADS)

Anastasio, D. J.; Sahagian, D. L.; Bodzin, A.; Teletzke, A. L.; Rutzmoser, S.; Cirucci, L.; Bressler, D.; Burrows, J. E.

2012-12-01

Tectonics is a new curriculum enhancement consisting of six Web GIS investigations designed to augment a traditional middle school Earth science curriculum. The investigations are aligned to Disciplinary Core Ideas: Earth and Space Science from the National Research Council's (2012) Framework for K-12 Science Education and to tectonics benchmark ideas articulated in the AAAS Project 2061 (2007) Atlas of Science Literacy. The curriculum emphasizes geospatial thinking and scientific inquiry and consists of the following modules: Geohazards, which plate boundary is closest to me? How do we recognize plate boundaries? How does thermal energy move around the Earth? What happens when plates diverge? What happens when plate move sideways past each other? What happens when plates collide? The Web GIS interface uses JavaScript for simplicity, intuition, and convenience for implementation on a variety of platforms making it easier for diverse middle school learners and their teachers to conduct authentic Earth science investigations, including multidisciplinary visualization, analysis, and synthesis of data. Instructional adaptations allow students who are English language learners, have disabilities, or are reluctant readers to perform advanced desktop GIS functions including spatial analysis, map visualization and query. The Web GIS interface integrates graphics, multimedia, and animation in addition to newly developed features, which allow users to explore and discover geospatial patterns that would not be easily visible using typical classroom instructional materials. The Tectonics curriculum uses a spatial learning design model that incorporates a related set of frameworks and design principles. The framework builds on the work of other successful technology-integrated curriculum projects and includes, alignment of materials and assessments with learning goals, casting key ideas in real-world problems, engaging students in scientific practices that foster the use of key ideas, uses geospatial technology, and supports for teachers in adopting and implementing GIS and inquiry-based activities.

Genetic interaction networks: better understand to better predict

PubMed Central

Boucher, Benjamin; Jenna, Sarah

2013-01-01

A genetic interaction (GI) between two genes generally indicates that the phenotype of a double mutant differs from what is expected from each individual mutant. In the last decade, genome scale studies of quantitative GIs were completed using mainly synthetic genetic array technology and RNA interference in yeast and Caenorhabditis elegans. These studies raised questions regarding the functional interpretation of GIs, the relationship of genetic and molecular interaction networks, the usefulness of GI networks to infer gene function and co-functionality, the evolutionary conservation of GI, etc. While GIs have been used for decades to dissect signaling pathways in genetic models, their functional interpretations are still not trivial. The existence of a GI between two genes does not necessarily imply that these two genes code for interacting proteins or that the two genes are even expressed in the same cell. In fact, a GI only implies that the two genes share a functional relationship. These two genes may be involved in the same biological process or pathway; or they may also be involved in compensatory pathways with unrelated apparent function. Considering the powerful opportunity to better understand gene function, genetic relationship, robustness and evolution, provided by a genome-wide mapping of GIs, several in silico approaches have been employed to predict GIs in unicellular and multicellular organisms. Most of these methods used weighted data integration. In this article, we will review the later knowledge acquired on GI networks in metazoans by looking more closely into their relationship with pathways, biological processes and molecular complexes but also into their modularity and organization. We will also review the different in silico methods developed to predict GIs and will discuss how the knowledge acquired on GI networks can be used to design predictive tools with higher performances. PMID:24381582

Crisis GIS: Preparing for the Next Volcanic Crisis in the United States

NASA Astrophysics Data System (ADS)

Ramsey, D. W.; Robinson, J. E.; Schilling, S. P.; Schaefer, J. R.; Kimberly, P.; Trusdell, F. A.; Guffanti, M. C.; Mayberry, G. C.; Cameron, C. E.; Smith, J. G.; McIntire, J. A.; Snedigar, S.; Ewert, J. W.

2004-12-01

Geographic Information Systems (GIS) specialists from the Volcano Hazards Program (VHP) of the U.S. Geological Survey (USGS), including personnel at Menlo Park, California, the Cascades Volcano Observatory in Vancouver, Washington, the Alaska Volcano Observatory in Anchorage and Fairbanks, Alaska, the Hawaiian Volcano Observatory in Hawaii National Park, Hawaii, and the Smithsonian Institution Global Volcanism Program in Washington, DC, are developing a GIS response plan in the event of a volcano crisis. This plan, referred to as "Crisis GIS", outlines how VHP can ensure rapid, reliable delivery of spatial and ancillary information for data analysis and visualization at any required location during a volcanic crisis or event within the United States. An effective Crisis GIS needs the capacity to store multiple, large datasets, including: base layer data, elevation data, geologic maps, hazard assessment maps, satellite data, and aerial photography for volcanoes around the U.S. It must be readily accessible by VHP GIS specialists stationed around the Nation. Such a GIS should also support installations of monitoring instruments and telemetry equipment that relay monitoring signals, and provision of updates to public officials, the media, and the public during a crisis. GIS technology has proven to be an invaluable tool for crisis response. Recently, GIS was applied as part of the response efforts to two large-scale crises: the terrorist attacks of September 11, 2001, and the Southern California wildfires of Fall 2003. In each case, GIS was used to organize large quantities of spatial data and to produce electronic and paper maps that illustrated hazards, supported decision making, and communicated developing situations to responsible emergency-management authorities and to the populace affected (Kant, 2002, and Pratt, 2003). VHP GIS specialists are currently testing the software and hardware employed in recent major crisis response efforts and are learning to adapt the technology for volcano crisis response.

[Application of GIS and integrated mathematic models on estimating forest land wood productiveness and solar energy use efficiency].

PubMed

Xing, Shihe; Lin, Dexi; Shen, Jinquan; Cao, Rongbin

2005-10-01

Based on the meteorological elements observation and mountain soil survey in Fujian Province, this paper approached the application of geographic information system (GIS) and integrated mathematic models on estimating the grid wood productiveness and solar energy use efficiency (SEUE) of regional forest land. The results showed that there was a significant quadratic correlation of annual mean temperature, precipitation and total solar radiation energy(TSRE) with longitude, latitude and altitude, and their multiple correlation coefficients ranged from 0.692 to 0.981. The regional annual mean TSRE, temperature and precipitation could be well estimated by GIS and integrated models of quadratic tendency curve, and linear, quadratic and quartic inverse distance weighted interpolation. These annual means estimated by the models did not differ greatly from observed data, and the t test values were 1.29, 0.12 and 0.06, respectively. The grid wood productiveness and SEUE of regional forest land in Fujian could also be well estimated with the aid of GIS and integrated models, which ranged from 2.32 m3 x hm(-2) yr(-1) to 18.61 m3 x hm(-2) yr(-1) and from 0.11% to 0.91%, respectively.

Collapse susceptibility mapping in karstified gypsum terrain (Sivas basin - Turkey) by conditional probability, logistic regression, artificial neural network models

NASA Astrophysics Data System (ADS)

Yilmaz, Isik; Keskin, Inan; Marschalko, Marian; Bednarik, Martin

2010-05-01

This study compares the GIS based collapse susceptibility mapping methods such as; conditional probability (CP), logistic regression (LR) and artificial neural networks (ANN) applied in gypsum rock masses in Sivas basin (Turkey). Digital Elevation Model (DEM) was first constructed using GIS software. Collapse-related factors, directly or indirectly related to the causes of collapse occurrence, such as distance from faults, slope angle and aspect, topographical elevation, distance from drainage, topographic wetness index- TWI, stream power index- SPI, Normalized Difference Vegetation Index (NDVI) by means of vegetation cover, distance from roads and settlements were used in the collapse susceptibility analyses. In the last stage of the analyses, collapse susceptibility maps were produced from CP, LR and ANN models, and they were then compared by means of their validations. Area Under Curve (AUC) values obtained from all three methodologies showed that the map obtained from ANN model looks like more accurate than the other models, and the results also showed that the artificial neural networks is a usefull tool in preparation of collapse susceptibility map and highly compatible with GIS operating features. Key words: Collapse; doline; susceptibility map; gypsum; GIS; conditional probability; logistic regression; artificial neural networks.

Mapping wildland fuels for fire management across multiple scales: integrating remote sensing, GIS, and biophysical modeling

USGS Publications Warehouse

Keane, Robert E.; Burgan, Robert E.; Van Wagtendonk, Jan W.

2001-01-01

Fuel maps are essential for computing spatial fire hazard and risk and simulating fire growth and intensity across a landscape. However, fuel mapping is an extremely difficult and complex process requiring expertise in remotely sensed image classification, fire behavior, fuels modeling, ecology, and geographical information systems (GIS). This paper first presents the challenges of mapping fuels: canopy concealment, fuelbed complexity, fuel type diversity, fuel variability, and fuel model generalization. Then, four approaches to mapping fuels are discussed with examples provided from the literature: (1) field reconnaissance; (2) direct mapping methods; (3) indirect mapping methods; and (4) gradient modeling. A fuel mapping method is proposed that uses current remote sensing and image processing technology. Future fuel mapping needs are also discussed which include better field data and fuel models, accurate GIS reference layers, improved satellite imagery, and comprehensive ecosystem models.

A GIS-based approach for comparative analysis of potential fire risk assessment

NASA Astrophysics Data System (ADS)

Sun, Ying; Hu, Lieqiu; Liu, Huiping

2007-06-01

Urban fires are one of the most important sources of property loss and human casualty and therefore it is necessary to assess the potential fire risk with consideration of urban community safety. Two evaluation models are proposed, both of which are integrated with GIS. One is the single factor model concerning the accessibility of fire passage and the other is grey clustering approach based on the multifactor system. In the latter model, fourteen factors are introduced and divided into four categories involving security management, evacuation facility, construction resistance and fire fighting capability. A case study on campus of Beijing Normal University is presented to express the potential risk assessment models in details. A comparative analysis of the two models is carried out to validate the accuracy. The results are approximately consistent with each other. Moreover, modeling with GIS promotes the efficiency the potential risk assessment.

Land-use planning of Volyn region (Ukraine) using Geographic Information Systems (GIS) technologies

NASA Astrophysics Data System (ADS)

Strielko, Irina; Pereira, Paulo

2014-05-01

Land-use development planning is carried out in order to create a favourable environment for human life, sustainable socioeconomic and spatial development. Landscape planning is an important part of land-use development that aims to meet the fundamental principles of sustainable development. Geographic Information Systems (GIS) is a fundamental tool to make a better landscape planning at different territorial levels, providing data and maps to support decision making. The objective of this work is to create spatio-temporal, territorial and ecological model of development of Volyn region (Ukraine). It is based on existing spatial raster and vector data and includes the analysis of territory dynamics as the aspects responsible for it. A spatial analyst tool was used to zone the areas according to their environmental components and economic activity. This analysis is fundamental to define the basic parameters of sustainability of Volyn region. To carry out this analysis, we determined the demographic capacity of districts and the analysis of spatial parameters of land use. On the basis of the existing natural resources, we observed that there is a need of landscape protection and integration of more are natural areas in the Pan-European Ecological Network. Using GIS technologies to landscape planning in Volyn region, allowed us to identify, natural areas of interest, contribute to a better resource management and conflict resolution. Geographic Information Systems will help to formulate and implement landscape policies, reform the existing administrative system of Volyn region and contribute to a better sustainable development.

Development of an Integrated Hydrologic Modeling System for Rainfall-Runoff Simulation

NASA Astrophysics Data System (ADS)

Lu, B.; Piasecki, M.

2008-12-01

This paper aims to present the development of an integrated hydrological model which involves functionalities of digital watershed processing, online data retrieval, hydrologic simulation and post-event analysis. The proposed system is intended to work as a back end to the CUAHSI HIS cyberinfrastructure developments. As a first step into developing this system, a physics-based distributed hydrologic model PIHM (Penn State Integrated Hydrologic Model) is wrapped into OpenMI(Open Modeling Interface and Environment ) environment so as to seamlessly interact with OpenMI compliant meteorological models. The graphical user interface is being developed from the openGIS application called MapWindows which permits functionality expansion through the addition of plug-ins. . Modules required to set up through the GUI workboard include those for retrieving meteorological data from existing database or meteorological prediction models, obtaining geospatial data from the output of digital watershed processing, and importing initial condition and boundary condition. They are connected to the OpenMI compliant PIHM to simulate rainfall-runoff processes and includes a module for automatically displaying output after the simulation. Online databases are accessed through the WaterOneFlow web services, and the retrieved data are either stored in an observation database(OD) following the schema of Observation Data Model(ODM) in case for time series support, or a grid based storage facility which may be a format like netCDF or a grid-based-data database schema . Specific development steps include the creation of a bridge to overcome interoperability issue between PIHM and the ODM, as well as the embedding of TauDEM (Terrain Analysis Using Digital Elevation Models) into the model. This module is responsible for developing watershed and stream network using digital elevation models. Visualizing and editing geospatial data is achieved by the usage of MapWinGIS, an ActiveX control developed by MapWindow team. After applying to the practical watershed, the performance of the model can be tested by the post-event analysis module.

Developing of operational hydro-meteorological simulating and displaying system

NASA Astrophysics Data System (ADS)

Wang, Y.; Shih, D.; Chen, C.

2010-12-01

Hydrological hazards, which often occur in conjunction with extreme precipitation events, are the most frequent type of natural disaster in Taiwan. Hence, the researchers at the Taiwan Typhoon and Flood Research Institute (TTFRI) are devoted to analyzing and gaining a better understanding of the causes and effects of natural disasters, and in particular, typhoons and floods. The long-term goal of the TTFRI is to develop a unified weather-hydrological-oceanic model suitable for simulations with local parameterizations in Taiwan. The development of a fully coupled weather-hydrology interaction model is not yet completed but some operational hydro-meteorological simulations are presented as a step in the direction of completing a full model. The predicted rainfall data from Weather Research Forecasting (WRF) are used as our meteorological forcing on watershed modeling. The hydrology and hydraulic modeling are conducted by WASH123D numerical model. And the WRF/WASH123D coupled system is applied to simulate floods during the typhoon landfall periods. The daily operational runs start at 04UTC, 10UTC, 16UTC and 22UTC, about 4 hours after data downloaded from NCEP GFS. This system will execute 72-hr weather forecasts. The simulation of WASH123D will sequentially trigger after receiving WRF rainfall data. This study presents the preliminary framework of establishing this system, and our goal is to build this earlier warning system to alert the public form dangerous. The simulation results are further display by a 3D GIS web service system. This system is established following the Open Geospatial Consortium (OGC) standardization process for GIS web service, such as Web Map Service (WMS) and Web Feature Service (WFS). The traditional 2D GIS data, such as high resolution aerial photomaps and satellite images are integrated into 3D landscape model. The simulated flooding and inundation area can be dynamically mapped on Wed 3D world. The final goal of this system is to real-time forecast flood and the results can be visually displayed on the virtual catchment. The policymaker can easily and real-time gain visual information for decision making at any site through internet.

Application of GIS in Modeling Zilberchai Basin Runoff

NASA Astrophysics Data System (ADS)

Malekani, L.; Khaleghi, S.; Mahmoodi, M.

2014-10-01

Runoff is one of most important hydrological variables that are used in many civil works, planning for optimal use of reservoirs, organizing rivers and warning flood. The runoff curve number (CN) is a key factor in determining runoff in the SCS (Soil Conservation Service) based hydrologic modeling method. The traditional SCS-CN method for calculating the composite curve number consumes a major portion of the hydrologic modeling time. Therefore, geographic information systems (GIS) are now being used in combination with the SCS-CN method. This work uses a methodology of determining surface runoff by Geographic Information System model and applying SCS-CN method that needs the necessary parameters such as land use map, hydrologic soil groups, rainfall data, DEM, physiographic characteristic of the basin. The model is built by implementing some well known hydrologic methods in GIS like as ArcHydro, ArcCN-Runoff for modeling of Zilberchai basin runoff. The results show that the high average weighted of curve number indicate that permeability of the basin is low and therefore likelihood of flooding is high. So the fundamental works is essential in order to increase water infiltration in Zilberchai basin and to avoid wasting surface water resources. Also comparing the results of the computed and observed runoff value show that use of GIS tools in addition to accelerate the calculation of the runoff also increase the accuracy of the results. This paper clearly demonstrates that the integration of GIS with the SCS-CN method provides a powerful tool for estimating runoff volumes in large basins.

Indonesian drought monitoring from space. A report of SAFE activity: Assessment of drought impact on rice production in Indonesia by satellite remote sensing and dissemination with web-GIS

NASA Astrophysics Data System (ADS)

Shofiyati, Rizatus; Takeuchi, Wataru; Sofan, Parwati; Darmawan, Soni; Awaluddin; Supriatna, Wahyu

2014-06-01

Long droughts experienced in Indonesia in the past are identified as one of the main factors in the failure of rice production. In this regard, special attention to monitor the condition is encouraged to reduce the damage. Currently, various satellite data and approaches can withdraw valuable information for monitoring and anticipating drought hazards. Two types of drought, Meteorology and Agriculture, have been assessed. During the last 10 years, daily and monthly rainfall data derived from TRMM and GSMaP. MTSAT and AMSR-E data have been analyzed to identify meteorological drought. Agricultural drought has been studied by observing the character of some indices (EVI, VCI, VHI, LST, and NDVI) of sixteen-day and monthly MODIS data at a period of 5 years (2009 - 2013). Network for data transfer has been built between LAPAN (data provider), ICALRD (implementer), IAARD Cloud Computing, and University of Tokyo (technical supporter). A Web-GIS based Drought Monitoring Information System has been developed to disseminate the information to end users. This paper describes the implementation of remote sensing drought monitoring model and development of Web-GIS and satellite based information system.

Gis-Based Spatial Statistical Analysis of College Graduates Employment

NASA Astrophysics Data System (ADS)

Tang, R.

2012-07-01

It is urgently necessary to be aware of the distribution and employment status of college graduates for proper allocation of human resources and overall arrangement of strategic industry. This study provides empirical evidence regarding the use of geocoding and spatial analysis in distribution and employment status of college graduates based on the data from 2004-2008 Wuhan Municipal Human Resources and Social Security Bureau, China. Spatio-temporal distribution of employment unit were analyzed with geocoding using ArcGIS software, and the stepwise multiple linear regression method via SPSS software was used to predict the employment and to identify spatially associated enterprise and professionals demand in the future. The results show that the enterprises in Wuhan east lake high and new technology development zone increased dramatically from 2004 to 2008, and tended to distributed southeastward. Furthermore, the models built by statistical analysis suggest that the specialty of graduates major in has an important impact on the number of the employment and the number of graduates engaging in pillar industries. In conclusion, the combination of GIS and statistical analysis which helps to simulate the spatial distribution of the employment status is a potential tool for human resource development research.

Increasing Diversity in Geosciences: Geospatial Initiatives at North Carolina Central University

NASA Astrophysics Data System (ADS)

Vlahovic, G.; Malhotra, R.; Renslow, M.; Harris, J.; Barnett, A.

2006-12-01

Two new initiatives funded by the NSF-GEO and NSF-HRD directorates have potential to advance the geospatial program at the North Carolina Central University (NCCU). As one of only two Historically Black Colleges and Universities (HBCUs) in the southeast offering Geography as a major, NCCU is establishing a GIS Research, Innovative Teaching, and Service (GRITS) Laboratory and has partnered with American Society for Photogrammetry and Remote Sensing (ASPRS) to offer GIS certification to Geography graduates. This presentation will focus on the role that GRITS and GIS certification will play in attracting students to the geoscience majors, the planned curriculum changes, and the emerging partnership with ASPRS to develop and offer "provisional certification" to NCCU students. In addition, authors would also like to describe plans to promote geospatial education in partnership with other educational institutions. NCCUs high minority enrollment (at the present approximately 90%) and quality and tradition of geoscience program make it an ideal incubator for accreditation and certification activities and possible role model for other HBCUs.

Professional Development: Teachers Use of GIS to Enhance Student Learning

ERIC Educational Resources Information Center

McClurg, Patricia A.; Buss, Alan

2007-01-01

This article explains a professional development experience of fifth to twelfth grade teachers in using geographic information systems (GIS) and global positioning systems (GPS) technologies to enhance classroom teaching and learning environments. A key challenge faced by the developers was whether teachers would value the technology tools enough…

Drainpipe network management information system design based on GIS and SCADA technique

NASA Astrophysics Data System (ADS)

Gu, Ze-Yu; Zhao, De-An

2011-02-01

Achieving urban drainpipe network integration of geographical information system (GIS) and supervisory control and data acquisition (SCADA) technology is described in this paper. The system design's plans are put forward, which have realized GIS and SCADA system supplementary in the technology and strengthened the model visible analysis ability. It is verified by practical cases that the system has more practical values and a good prospect.

Evaluation of land capability and suitability for irrigated agriculture in the Emirate of Abu Dhabi, UAE, using an integrated AHP-GIS model

NASA Astrophysics Data System (ADS)

Aldababseh, A.; Temimi, M.; Maghelal, P.; Branch, O.; Wulfmeyer, V.

2017-12-01

The rapid economic development and high population growth in the United Arab Emirates (UAE) have impacted utilization and management of agricultural land. The development of large-scale agriculture in unsuitable areas can severely impact groundwater resources in the UAE. More than 60% of UAE's water resources are being utilized by the agriculture, forestry, and urban greenery sectors. However, the contribution of the agricultural sector to the national GDP is negligible. Several programs have been introduced by the government aimed at achieving sustainable agriculture whilst preserving valuable water resources. Local subsistence farming has declined considerably during the past few years, due to low soil moisture content, sandy soil texture, lack of arable land, natural climatic disruptions, water shortages, and declined rainfall. The limited production of food and the continuing rise in the food prices on a global and local level are expected to increase low-income households' vulnerability to food insecurity. This research aims at developing a suitability index for the evaluation and prioritization of areas in the UAE for large-scale agriculture. The AHP-GIS integrated model developed in this study facilitates a step by step aggregation of a large number of datasets representing the most important criteria, and the generation of agricultural suitability and land capability maps. To provide the necessary criteria to run the model, a comprehensive geospatial database was built, including climate conditions, water potential, soil capabilities, topography, and land management. A hieratical structure is built as a decomposition structure that includes all criteria and sub-criteria used to define land suitability based on literature review and experts' opinions. Pairwise comparisons matrix are used to calculate criteria' weights. The GIS Model Builder function is used to integrate all spatial processes to model land suitability. In order to preserve some flexibility for future agricultural pathways, different types of crops are considered. This process helped in recommending a set of findings that will determine whether large-scale plantations are recommended for the UAE. It also identifies the kind of crops that have the highest potential to adapt to the hot and dry weather without affecting the crops yield.

Evaluation of land capability and suitability for irrigated agriculture in the Emirate of Abu Dhabi, UAE, using an integrated AHP-GIS model

NASA Astrophysics Data System (ADS)

Aldababseh, Amal; Temimi, Marouane; Maghelal, Praveen; Branch, Oliver; Wulfmeyer, Volker

2017-12-01

The rapid economic development and high population growth in the United Arab Emirates (UAE) have impacted utilization and management of agricultural land. The development of large-scale agriculture in unsuitable areas can severely impact groundwater resources in the UAE. More than 60% of UAE's water resources are being utilized by the agriculture, forestry, and urban greenery sectors. However, the contribution of the agricultural sector to the national GDP is negligible. Several programs have been introduced by the government aimed at achieving sustainable agriculture whilst preserving valuable water resources. Local subsistence farming has declined considerably during the past few years, due to low soil moisture content, sandy soil texture, lack of arable land, natural climatic disruptions, water shortages, and declined rainfall. The limited production of food and the continuing rise in the food prices on a global and local level are expected to increase low-income households' vulnerability to food insecurity. This research aims at developing a suitability index for the evaluation and prioritization of areas in the UAE for large-scale agriculture. The AHP-GIS integrated model developed in this study facilitates a step by step aggregation of a large number of datasets representing the most important criteria, and the generation of agricultural suitability and land capability maps. To provide the necessary criteria to run the model, a comprehensive geospatial database was built, including climate conditions, water potential, soil capabilities, topography, and land management. A hierarchical structure is built as a decomposition structure that includes all criteria and sub-criteria used to define land suitability based on literature review and experts' opinions. Pairwise comparisons matrix are used to calculate criteria' weights. The GIS Model Builder function is used to integrate all spatial processes to model land suitability. In order to preserve some flexibility for future agricultural pathways, different types of crops are considered. This process helped in recommending a set of findings that will determine whether large-scale plantations are recommended for the UAE. It also identifies the kind of crops that have the highest potential to adapt to the hot and dry weather without affecting the crops yield.

Greenland was nearly ice-free for extended periods during the Pleistocene

NASA Astrophysics Data System (ADS)

Schaefer, Joerg M.; Finkel, Robert C.; Balco, Greg; Alley, Richard B.; Caffee, Marc W.; Briner, Jason P.; Young, Nicolas E.; Gow, Anthony J.; Schwartz, Roseanne

2016-12-01

The Greenland Ice Sheet (GIS) contains the equivalent of 7.4 metres of global sea-level rise. Its stability in our warming climate is therefore a pressing concern. However, the sparse proxy evidence of the palaeo-stability of the GIS means that its history is controversial (compare refs 2 and 3 to ref. 4). Here we show that Greenland was deglaciated for extended periods during the Pleistocene epoch (from 2.6 million years ago to 11,700 years ago), based on new measurements of cosmic-ray-produced beryllium and aluminium isotopes (10Be and 26Al) in a bedrock core from beneath an ice core near the GIS summit. Models indicate that when this bedrock site is ice-free, any remaining ice is concentrated in the eastern Greenland highlands and the GIS is reduced to less than ten per cent of its current volume. Our results narrow the spectrum of possible GIS histories: the longest period of stability of the present ice sheet that is consistent with the measurements is 1.1 million years, assuming that this was preceded by more than 280,000 years of ice-free conditions. Other scenarios, in which Greenland was ice-free during any or all Pleistocene interglacials, may be more realistic. Our observations are incompatible with most existing model simulations that present a continuously existing Pleistocene GIS. Future simulations of the GIS should take into account that Greenland was nearly ice-free for extended periods under Pleistocene climate forcing.

A GIS based model for active transportation in the built environment

NASA Astrophysics Data System (ADS)

Addison, Veronica Marie Medina

Obesity and physical inactivity have been major risk factors associated with morbidity and mortality in the United States. Recently, obesity and physical inactivity have been on the rise. Determining connections between this trend and the environment could lead to a built environment that is conducive to healthy, active people. In my previous research, I have studied the built environment and its connection to health. For my dissertation, I build on this fundamental work by incorporating energy, specifically by studying the built environment and its connection to energy expenditures. This research models the built environment and combines this with human energy expenditure information in order to provide a planning tool that allows an individual to actively address health issues, particularly obesity. This research focuses on the design and development of an internet based model that enables individuals to understand their own energy expenditures in relation to their environment. The model will work to find the energy consumed by an individual in their navigation through campus. This is accomplished by using Geographic Information Systems (GIS) to model the campus and using it as the basis for calculating energy expended through active transportation. Using GIS to create the model allows for the incorporation of built environment factors such as elevation and energy expenditures in relation to physical exertion rate. This research will contribute to the long-term solution to the obesity epidemic by creating healthy communities through smart growth and sustainable design. This research provides users with a tool to use in their current environment for their personal and community well being.

An assessment of anthropogenic and climatic stressors on estuaries using a spatio-temporal GIS-modelling approach for sustainability: Towamba estuary, southeastern Australia.

PubMed

Al-Nasrawi, Ali K M; Hamylton, Sarah M; Jones, Brian G

2018-06-03

Monitoring estuarine ecological-geomorphological dynamics has become a crucial aspect of studying the impacts of climate change and worldwide infrastructure development in coastal zones. Together, these factors have changed the natural eco-geomorphic processes that affect estuarine regimes and comprehensive modelling of coastal resources can assist managers to make appropriate decisions about their sustainable use. This study has utilised Towamba estuary (southeastern NSW, Australia), to demonstrate the value and priority of modelling estuarine dynamism as a measure of the rates and consequences of eco-geomorphic changes. This research employs several geoinformatic modelling approaches over time to investigate and assess how climate change and human activities have altered this estuarine eco-geomorphic setting. Multitemporal trend/change analysis of sediment delivery, shoreline positions and land cover, determined from fieldwork and GIS analysis of remote sensing datasets, shows significant spatio-temporal changes to the elevation and areal extent of sedimentary facies in the Towamba estuary over the past 65 years. Geomorphic growth (~ 2600 m 2 annually) has stabilised the estuarine habitats, particularly within native vegetation, salt marsh and mangrove areas. Geomorphic changes have occurred because of a combination of sediment runoff from the mostly unmodified terrestrial catchment, nearshore processes (ocean dynamics) and human activities. The construction of GIS models, verified with water and sediment samples, can characterise physical processes and quantify changes within the estuarine ecosystem. Such robust models will allow resource managers to evaluate the potential effects of changes to the current coastal ecosystems.

Effects of residential development and landscape composition on the breeding birds of Placer county's foothill oak woodlands

Treesearch

Diana Stralberg; Brian Williams

2002-01-01

This study examines the effect of rural residential development and landscape composition on breeding birds in Placer County’s foothill oak woodlands. Point count survey data were used to construct generalized linear models for individual species' abundance or probability of occurrence, based on two sets of variables: GIS-derived landscape characteristics,...

Starting with Teachers: Bringing GIS technology to the secondary classroom

NASA Astrophysics Data System (ADS)

Claesgens, J.; Rubino-Hare, L.; Sample, J. C.; Fredrickson, K.; Manone, M.

2010-12-01

An aim of the NSF-ITEST funded POD project is to examine the effect that technology-integrated, problem-based learning modules have on the learning of secondary students whose teachers have participated in a curriculum implementation professional development structure. This research focuses on the professional development structure as the first step to achieving changes in student learning. The assumption is that the teachers themselves have to learn the technology before they can successfully implement it into their classrooms. Teachers attended a 2-week professional development workshop that presented pedagogy, content and GIS training. Our premise for the workshop was that modeling and practicing research-based pedagogical practice will improve participant science instruction through an immersion program focusing on real life problems. The second premise is that improving teacher technology skills and pedagogical knowledge and practice will improve student achievement in science. Professional development is necessary to help teachers learn not only how to use new technology but also how to provide meaningful instruction and activities using technology in the classroom. Therefore if our goal is to immerse the teachers in learning as the students, we need to measure if they indeed did learn. To evaluate if the teacher learned the material just as a student might, we administered a pre- and post-test to 23 teachers attending the workshops. There were 2 forms of the test, a multiple-choice test that focused on content questions in earth science, interpretation of GIS screen shots and spatial reasoning skills. The second component, the Geospatial Technology Performance Assessment, focused on the teachers’ abilities to use the GIS technology to gather data, sort and communicate information using maps, tables and keys. For the latter a grounded-theory approach was used to group teachers answers based on the responses provided. Teacher responses fell into 5 groups, scored 0-4. These scores were cumulative, meaning that for someone to earn a 3 they needed to be able to show proficiency at a 1 and 2 level. Results of the pre and posttests are in the table below. The ultimate goal of this project is to improve student understanding. At this point we have data that our teachers did develop an understanding of GIS from the professional development workshop that we hope to see implemented into the classroom.Results of pre and posttests *The scoring rubric will be presented at the conference.

A comparison of self reported air pollution problems and GIS-modeled levels of air pollution in people with and without chronic diseases

PubMed Central

Piro, Fredrik Niclas; Madsen, Christian; Næss, Øyvind; Nafstad, Per; Claussen, Bjørgulf

2008-01-01

Objective To explore various contributors to people's reporting of self reported air pollution problems in area of living, including GIS-modeled air pollution, and to investigate whether those with respiratory or other chronic diseases tend to over-report air pollution problems, compared to healthy people. Methods Cross-sectional data from the Oslo Health Study (2000–2001) were linked with GIS-modeled air pollution data from the Norwegian Institute of Air Research. Multivariate regression analyses were performed. 14 294 persons aged 30, 40, 45, 60 or 75 years old with complete information on modeled and self reported air pollution were included. Results People who reported air pollution problems were exposed to significantly higher GIS-modeled air pollution levels than those who did not report such problems. People with chronic disease, reported significantly more air pollution problems after adjustment for modeled levels of nitrogen dioxides, socio-demographic variables, smoking, depression, dwelling conditions and an area deprivation index, even if they had a non-respiratory disease. No diseases, however, were significantly associated with levels of nitrogen dioxides. Conclusion Self reported air pollution problems in area of living are strongly associated with increased levels of GIS-modeled air pollution. Over and above this, those who report to have a chronic disease tend to report more air pollution problems in area of living, despite no significant difference in air pollution exposure compared to healthy people, and no associations between these diseases and NO2. Studies on the association between self reported air pollution problems and health should be aware of the possibility that disease itself may influence the reporting of air pollution. PMID:18307757

Reservoirs and petroleum systems of the Gulf Coast

USGS Publications Warehouse

Pitman, Janet K.

2010-01-01

This GIS product was designed to provide a quick look at the ages and products (oil or gas) of major reservoir intervals with respect to the different petroleum systems that have been identified in the Gulf Coast Region. The three major petroleum source-rock systems are the Tertiary (Paleocene-Eocene) Wilcox Formation, Cretaceous (Turonian) Eagle Ford Formation, and Jurassic (Oxfordian) Smackover Formation. The ages of the reservoir units extend from Jurassic to Pleistocene. By combining various GIS layers, the user can gain insights into the maximum extent of each petroleum system and the pathways for petroleum migration from the source rocks to traps. Interpretations based on these data should improve development of exploration models for this petroleum-rich province.

Development of analytic intermodal freight networks for use within a GIS

DOE Office of Scientific and Technical Information (OSTI.GOV)

Southworth, F.; Xiong, D.; Middendorf, D.

1997-05-01

The paper discusses the practical issues involved in constructing intermodal freight networks that can be used within GIS platforms to support inter-regional freight routing and subsequent (for example, commodity flow) analysis. The procedures described can be used to create freight-routable and traffic flowable interstate and intermodal networks using some combination of highway, rail, water and air freight transportation. Keys to realistic freight routing are the identification of intermodal transfer locations and associated terminal functions, a proper handling of carrier-owned and operated sub-networks within each of the primary modes of transport, and the ability to model the types of carrier servicesmore » being offered.« less

Assessment of vulnerability zones for ground water pollution using GIS-DRASTIC-EC model: A field-based approach

NASA Astrophysics Data System (ADS)

Anantha Rao, D.; Naik, Pradeep K.; Jain, Sunil K.; Vinod Kumar, K.; Dhanamjaya Rao, E. N.

2018-06-01

Assessment of groundwater vulnerability to pollution is an essential pre-requisite for better planning of an area. We present the groundwater vulnerability assessment in parts of the Yamuna Nagar District, Haryana State, India in an area of about 800 km2, considered to be a freshwater zone in the foothills of the Siwalik Hill Ranges. Such areas in the Lower Himalayas form good groundwater recharge zones, and should always be free from contamination. But, the administration has been trying to promote industrialization along these foothill zones without actually assessing the environmental consequences such activities may invite in the future. GIS-DRASTIC model has been used with field based data inputs for studying the vulnerability assessment. But, we find that inclusion electrical conductivity (EC) as a model parameter makes it more robust. Therefore, we rename it as GIS-DRASTIC-EC model. The model identifies three vulnerability zones such as low, moderate and high with an areal extent of 5%, 80% and 15%, respectively. On the basis of major chemical parameters alone, the groundwater in the foothill zones apparently looks safe, but analysis with the help of GIS-DRASTIC-EC model gives a better perspective of the groundwater quality in terms of identifying the vulnerable areas.

Itzï (version 17.1): an open-source, distributed GIS model for dynamic flood simulation

NASA Astrophysics Data System (ADS)

Guillaume Courty, Laurent; Pedrozo-Acuña, Adrián; Bates, Paul David

2017-05-01

Worldwide, floods are acknowledged as one of the most destructive hazards. In human-dominated environments, their negative impacts are ascribed not only to the increase in frequency and intensity of floods but also to a strong feedback between the hydrological cycle and anthropogenic development. In order to advance a more comprehensive understanding of this complex interaction, this paper presents the development of a new open-source tool named Itzï that enables the 2-D numerical modelling of rainfall-runoff processes and surface flows integrated with the open-source geographic information system (GIS) software known as GRASS. Therefore, it takes advantage of the ability given by GIS environments to handle datasets with variations in both temporal and spatial resolutions. Furthermore, the presented numerical tool can handle datasets from different sources with varied spatial resolutions, facilitating the preparation and management of input and forcing data. This ability reduces the preprocessing time usually required by other models. Itzï uses a simplified form of the shallow water equations, the damped partial inertia equation, for the resolution of surface flows, and the Green-Ampt model for the infiltration. The source code is now publicly available online, along with complete documentation. The numerical model is verified against three different tests cases: firstly, a comparison with an analytic solution of the shallow water equations is introduced; secondly, a hypothetical flooding event in an urban area is implemented, where results are compared to those from an established model using a similar approach; and lastly, the reproduction of a real inundation event that occurred in the city of Kingston upon Hull, UK, in June 2007, is presented. The numerical approach proved its ability at reproducing the analytic and synthetic test cases. Moreover, simulation results of the real flood event showed its suitability at identifying areas affected by flooding, which were verified against those recorded after the event by local authorities.

GLABROUS INFLORESCENCE STEMS (GIS) is required for trichome branching through gibberellic acid signaling in Arabidopsis.

PubMed

An, Lijun; Zhou, Zhongjing; Su, Sha; Yan, An; Gan, Yinbo

2012-02-01

Cell differentiation generally corresponds to the cell cycle, typically forming a non-dividing cell with a unique differentiated morphology, and Arabidopsis trichome is an excellent model system to study all aspects of cell differentiation. Although gibberellic acid is reported to be involved in trichome branching in Arabidopsis, the mechanism for such signaling is unclear. Here, we demonstrated that GLABROUS INFLORESCENCE STEMS (GIS) is required for the control of trichome branching through gibberellic acid signaling. The phenotypes of a loss-of-function gis mutant and an overexpressor showed that GIS acted as a repressor to control trichome branching. Our results also show that GIS is not required for cell endoreduplication, and our molecular and genetic study results have shown that GIS functions downstream of the key regulator of trichome branching, STICHEL (STI), to control trichome branching through the endoreduplication-independent pathway. Furthermore, our results also suggest that GIS controls trichome branching in Arabidopsis through two different pathways and acts either upstream or downstream of the negative regulator of gibbellic acid signaling SPINDLY (SPY).

Managing Data in a GIS Environment

NASA Technical Reports Server (NTRS)

Beltran, Maria; Yiasemis, Haris

1997-01-01

A Geographic Information System (GIS) is a computer-based system that enables capture, modeling, manipulation, retrieval, analysis and presentation of geographically referenced data. A GIS operates in a dynamic environment of spatial and temporal information. This information is held in a database like any other information system, but performance is more of an issue for a geographic database than a traditional database due to the nature of the data. What distinguishes a GIS from other information systems is the spatial and temporal dimensions of the data and the volume of data (several gigabytes). Most traditional information systems are usually based around tables and textual reports, whereas GIS requires the use of cartographic forms and other visualization techniques. Much of the data can be represented using computer graphics, but a GIS is not a graphics database. A graphical system is concerned with the manipulation and presentation of graphical objects whereas a GIS handles geographic objects that have not only spatial dimensions but non-visual, i e., attribute and components. Furthermore, the nature of the data on which a GIS operates makes the traditional relational database approach inadequate for retrieving data and answering queries that reference spatial data. The purpose of this paper is to describe the efficiency issues behind storage and retrieval of data within a GIS database. Section 2 gives a general background on GIS, and describes the issues involved in custom vs. commercial and hybrid vs. integrated geographic information systems. Section 3 describes the efficiency issues concerning the management of data within a GIS environment. The paper ends with a summary of the main concerns of this paper.

GRASS GIS: The first Open Source Temporal GIS

NASA Astrophysics Data System (ADS)

Gebbert, Sören; Leppelt, Thomas

2015-04-01

GRASS GIS is a full featured, general purpose Open Source geographic information system (GIS) with raster, 3D raster and vector processing support[1]. Recently, time was introduced as a new dimension that transformed GRASS GIS into the first Open Source temporal GIS with comprehensive spatio-temporal analysis, processing and visualization capabilities[2]. New spatio-temporal data types were introduced in GRASS GIS version 7, to manage raster, 3D raster and vector time series. These new data types are called space time datasets. They are designed to efficiently handle hundreds of thousands of time stamped raster, 3D raster and vector map layers of any size. Time stamps can be defined as time intervals or time instances in Gregorian calendar time or relative time. Space time datasets are simplifying the processing and analysis of large time series in GRASS GIS, since these new data types are used as input and output parameter in temporal modules. The handling of space time datasets is therefore equal to the handling of raster, 3D raster and vector map layers in GRASS GIS. A new dedicated Python library, the GRASS GIS Temporal Framework, was designed to implement the spatio-temporal data types and their management. The framework provides the functionality to efficiently handle hundreds of thousands of time stamped map layers and their spatio-temporal topological relations. The framework supports reasoning based on the temporal granularity of space time datasets as well as their temporal topology. It was designed in conjunction with the PyGRASS [3] library to support parallel processing of large datasets, that has a long tradition in GRASS GIS [4,5]. We will present a subset of more than 40 temporal modules that were implemented based on the GRASS GIS Temporal Framework, PyGRASS and the GRASS GIS Python scripting library. These modules provide a comprehensive temporal GIS tool set. The functionality range from space time dataset and time stamped map layer management over temporal aggregation, temporal accumulation, spatio-temporal statistics, spatio-temporal sampling, temporal algebra, temporal topology analysis, time series animation and temporal topology visualization to time series import and export capabilities with support for NetCDF and VTK data formats. We will present several temporal modules that support parallel processing of raster and 3D raster time series. [1] GRASS GIS Open Source Approaches in Spatial Data Handling In Open Source Approaches in Spatial Data Handling, Vol. 2 (2008), pp. 171-199, doi:10.1007/978-3-540-74831-19 by M. Neteler, D. Beaudette, P. Cavallini, L. Lami, J. Cepicky edited by G. Brent Hall, Michael G. Leahy [2] Gebbert, S., Pebesma, E., 2014. A temporal GIS for field based environmental modeling. Environ. Model. Softw. 53, 1-12. [3] Zambelli, P., Gebbert, S., Ciolli, M., 2013. Pygrass: An Object Oriented Python Application Programming Interface (API) for Geographic Resources Analysis Support System (GRASS) Geographic Information System (GIS). ISPRS Intl Journal of Geo-Information 2, 201-219. [4] Löwe, P., Klump, J., Thaler, J. (2012): The FOSS GIS Workbench on the GFZ Load Sharing Facility compute cluster, (Geophysical Research Abstracts Vol. 14, EGU2012-4491, 2012), General Assembly European Geosciences Union (Vienna, Austria 2012). [5] Akhter, S., Aida, K., Chemin, Y., 2010. "GRASS GIS on High Performance Computing with MPI, OpenMP and Ninf-G Programming Framework". ISPRS Conference, Kyoto, 9-12 August 2010

Assembling and processing freight shipment data : developing a GIS-based origin-destination matrix for Southern California freight flows

DOT National Transportation Integrated Search

2001-06-30

Freight movements within large metropolitan areas are much less studied and analyzed than personal travel. This casts doubt on the results of much conventional travel demand modeling and planning. With so much traffic overlooked, how plausible are th...

Replacement of SSE (Release 6) with NASA's Prediction of Worldwide Energy Resource (POWER) Project GIS-enabled Web Data Portal:

Atmospheric Science Data Center

2018-03-15

... effort has been developed under the Prediction Of Worldwide Energy Resource (POWER) Project funded largely by NASA Earth Applied Sciences ... to NASA's satellite and modeling analysis for Renewable Energy, Sustainable Buildings and Agroclimatology applications.  A new POWER ...

Use of a GIS-based model of habitat cores and landscape corridors for the Virginia Department of Transportation's project planning and environmental scoping.

DOT National Transportation Integrated Search

2006-01-01

As important habitats are being lost to human development, transportation agencies are facing increased expectations that their road projects avoid or minimize further habitat destruction and adverse effects on wildlife populations. Wildlife linkage ...

Computer-Assisted Community Planning and Decision Making.

ERIC Educational Resources Information Center

College of the Atlantic, Bar Harbor, ME.

The College of the Atlantic (COA) developed a broad-based, interdisciplinary curriculum in ecological policy and community planning and decision-making that incorporates two primary computer-based tools: ARC/INFO Geographic Information System (GIS) and STELLA, a systems-dynamics modeling tool. Students learn how to use and apply these tools…

Predicting thermal regimes of stream networks across the northeast United States: Natural and anthropogenic influences

EPA Science Inventory

We used STARS (Spatial Tools for the Analysis of River Systems), an ArcGIS geoprocessing toolbox, to create spatial stream networks. We then developed and assessed spatial statistical models for each of these metrics, incorporating spatial autocorrelation based on both distance...

ndsd_50mwind

Science.gov Websites

: January, 2000 Title: ndsd_50mwind Geospatial_Data_Presentation_Form: vector digital data Description . Supplemental_Information: This data set was produced and validated by NREL using their WRAM model. This shapefile was , North Dakota, South Dakota Access_Constraints: None Use_Constraints: This GIS data was developed by the

Towards a C2 Poly-Visualization Tool: Leveraging the Power of Social-Network Analysis and GIS

DTIC Science & Technology

2011-06-01

from Magsino.14 AutoMap, a product of CASOS at Carnegie Mellon University, is a text-mining tool that enables the extraction of network data from...enables community leaders to prepare for biological attacks using computational models. BioWar is a CASOS package that combines many factors into a...models, demographically accurate agent modes, wind dispersion models, and an error-diagnostic model. Construct, also developed by CASOS , is a

Modifications of the U.S. Geological Survey modular, finite-difference, ground-water flow model to read and write geographic information system files

USGS Publications Warehouse

Orzol, Leonard L.; McGrath, Timothy S.

1992-01-01

This report documents modifications to the U.S. Geological Survey modular, three-dimensional, finite-difference, ground-water flow model, commonly called MODFLOW, so that it can read and write files used by a geographic information system (GIS). The modified model program is called MODFLOWARC. Simulation programs such as MODFLOW generally require large amounts of input data and produce large amounts of output data. Viewing data graphically, generating head contours, and creating or editing model data arrays such as hydraulic conductivity are examples of tasks that currently are performed either by the use of independent software packages or by tedious manual editing, manipulating, and transferring data. Programs such as GIS programs are commonly used to facilitate preparation of the model input data and analyze model output data; however, auxiliary programs are frequently required to translate data between programs. Data translations are required when different programs use different data formats. Thus, the user might use GIS techniques to create model input data, run a translation program to convert input data into a format compatible with the ground-water flow model, run the model, run a translation program to convert the model output into the correct format for GIS, and use GIS to display and analyze this output. MODFLOWARC, avoids the two translation steps and transfers data directly to and from the ground-water-flow model. This report documents the design and use of MODFLOWARC and includes instructions for data input/output of the Basic, Block-centered flow, River, Recharge, Well, Drain, Evapotranspiration, General-head boundary, and Streamflow-routing packages. The modification to MODFLOW and the Streamflow-Routing package was minimized. Flow charts and computer-program code describe the modifications to the original computer codes for each of these packages. Appendix A contains a discussion on the operation of MODFLOWARC using a sample problem.

[Establishment of comprehensive prediction model of acute gastrointestinal injury classification of critically ill patients].

PubMed

Wang, Yan; Wang, Jianrong; Liu, Weiwei; Zhang, Guangliang

2018-03-25

To develop the comprehensive prediction model of acute gastrointestinal injury (AGI) grades of critically ill patients. From April 2015 to November 2015, the binary channel gastrointestinal sounds (GIS) monitor system which has been developed and verified by the research group was used to gather and analyze the GIS of 60 consecutive critically ill patients who were admitted in Critical Care Medicine of Chinese PLA General Hospital. Also, the AGI grades (Grande I(-IIII(, the higher the level, the heavier the gastrointestinal dysfunction) were evaluated. Meanwhile, the clinical data and physiological and biochemical indexes of included patients were collected and recorded daily, including illness severity score (APACHE II( score, consisting of the acute physiology score, age grade and chronic health evaluation), sequential organ failure assessment (SOFA score, including respiration, coagulation, liver, cardioascular, central nervous system and kidney) and Glasgow coma scale (GCS); body mass index, blood lactate and glucose, and treatment details (including mechanical ventilation, sedatives, vasoactive drugs, enteral nutrition, etc.) Then principal component analysis was performed on the significantly correlated GIS (five indexes of gastrointestinal sounds were found to be negatively correlated with AGI grades, which included the number, percentage of time, mean power, maximum power and maximum time of GIS wave from the channel located at the stomach) and clinical factors after standardization. The top 5 post-normalized main components were selected for back-propagation (BP) neural network training, to establish comprehensive AGI grades models of critically ill patients based on the neural network model. The 60 patients aged 19 to 98 (mean 54.6) years and included 42 males (70.0%). There were 22 cases of multiple fractures, 15 cases of severe infection, 7 cases of cervical vertebral fracture, 7 cases of aortic repair, 5 cases of post-toxicosis and 4 cases of cerebral trauma. There were 33 emergency operation, 10 cases of elecoperectomy and 17 cases of drug treatment. There were 56 cases of diabetes(93.3%). Forty-five cases (75.0%) used vasoactive drugs, 37 cases (61.7%) used mechanical ventilation and 44 cases (73.3%) used enteral nutrition. APACHE II( score were 4.0 to 28.0(average 16.8) points. Four clinical factors were significantly positively related with AGI grades, including lactic acid level (r=0.215, P=0.000), SOFA score (r=0.383, P=0.000), the use of vascular active drugs (r=0.611, P=0.000) and mechanical ventilation (r=0.142, P=0.014). In addition to the five indexes of gastric bowel sounds which were found to be negatively correlated with AGI grades, the characteristics of 333 by 9 were composed of these nine indexes with high correlation of AGI grades. Five main components were selected after principal component analysis of these nine correlated indexes. A comprehensive AGI grades model of critically ill patients with a fitting degree of 0.967 3 and an accuracy rate of 82.61% was built by BP artificial neural network. The comprehensive model to classify AGI grades with the GIS is developed, which can help further predicting the classification of AGI grades of critically ill patients.

Towards a voxel-based geographic automata for the simulation of geospatial processes

NASA Astrophysics Data System (ADS)

Jjumba, Anthony; Dragićević, Suzana

2016-07-01

Many geographic processes evolve in a three dimensional space and time continuum. However, when they are represented with the aid of geographic information systems (GIS) or geosimulation models they are modelled in a framework of two-dimensional space with an added temporal component. The objective of this study is to propose the design and implementation of voxel-based automata as a methodological approach for representing spatial processes evolving in the four-dimensional (4D) space-time domain. Similar to geographic automata models which are developed to capture and forecast geospatial processes that change in a two-dimensional spatial framework using cells (raster geospatial data), voxel automata rely on the automata theory and use three-dimensional volumetric units (voxels). Transition rules have been developed to represent various spatial processes which range from the movement of an object in 3D to the diffusion of airborne particles and landslide simulation. In addition, the proposed 4D models demonstrate that complex processes can be readily reproduced from simple transition functions without complex methodological approaches. The voxel-based automata approach provides a unique basis to model geospatial processes in 4D for the purpose of improving representation, analysis and understanding their spatiotemporal dynamics. This study contributes to the advancement of the concepts and framework of 4D GIS.

Research and implementation on 3D modeling of geological body

NASA Astrophysics Data System (ADS)

Niu, Lijuan; Li, Ligong; Zhu, Renyi; Huang, Man

2017-10-01

This study based on GIS thinking explores the combination of the mixed spatial data model and GIS model to build three-dimensional(3d) model of geological bodies in the Arc Engine platform, describes the interface and method used in the construction of 3d geological body in Arc Engine component platform in detail, and puts forward an indirect method which constructs a set of geological grid layers through Rigging interpolation by the borehole data and then converts it into the geological layers of TIN, which improves the defect in building the geological layers of TIN directly and makes it better to complete the simulation of the real geological layer. This study makes a useful attempt to build 3d model of the geological body based on the GIS, and provides a certain reference value for simulating geological bodies in 3d and constructing the digital system of underground space.

Identifying suitable sanitary landfill locations in the state of Morelos, México, using a Geographic Information System

NASA Astrophysics Data System (ADS)

Marín, Luis E.; Torres, Vicente; Bolongaro, Andrea; Reyna, José A.; Pohle, O.; Hernández-Espriú, A.; Chavarría, Jerónimo; García-Barrios, R.; Tabla, Hugo Francisco Parra

GIS is a powerful tool that may help to better manage natural resources. In this paper, we present a GIS model developed for the state of Morelos as an aid to determine whether a potential site, Loma de Mejia, met the Mexican Federal Guidelines. The Mexican Government has established federal guidelines for sanitary landfill site selection (NOM-083-SERMARNAT-2003). These guidelines were translated into a water-based Geographic Information System and applied to the state of Morelos, Mexico. For these examples, we used the SIGAM® (Sistema de Información Geográfico del Agua en México; a water-based GIS for Mexico) which has at least 60 layers from the National Water Commission (CONAGUA), the national mapping agency (INEGI; Instituto Nacional de Estadística, Geografía e Informática), NASA, and academic institutions. Results show that a GIS is a powerful tool that may allow federal, state and municipal policy makers to conduct an initial regional site reconnaissance rapidly. Once potential sites are selected, further characterization must be carried out in order to determine if proposed locations are suitable or not for a sanitary landfill. Based on the SIGAM© software, the Loma de Mejia would not comply with the Mexican Federal Guidelines.

MOBIDIC-U: a watershed-scale model for stormwater attenuation through green infrastructures design

NASA Astrophysics Data System (ADS)

Ercolani, G.; Masseroni, D.; Chiaradia, E. A.; Bischetti, G. B.; Gandolfi, C.; Castelli, F.

2017-12-01

Surface water degradation resulting from the effects of urbanization on hydrology, water quality, habitat as well as ecological and environmental compartments represents an issue of primary focus for multiple agencies at the national, regional and local levels. Many management actions are needed throughout urban watersheds to achieve the desired effects on flow mitigation and pollutant reduction, but no single standardized solution can be effective in all locations. In this work, the distributed hydrological model MOBIDIC, already applied for hydrological balance simulations and flood prevention in different Italian regions, is adapted to the urban context (MOBIDIC-U) in order to evaluate alternative plans for stormwater quality management and flow abatement techniques through the adoption of green infrastructures (GIs). In particular the new modules included in MOBIDIC-U allow to (i) automatically define the upstream flow path as well as watershed boundary starting from a selected watershed closure point on the urban drainage network and (ii) obtain suitable graphical outputs for the visualization of flow peak and volume attenuation at the closure point. Moreover, MOBIDIC-U provides a public domain tool capable of evaluating the optimal location, type, and cost of the stormwater management practices needed to meet water quantity and quality goals. Despite the scalability of the model to different urban contexts, the current version of MOBIDIC-U has been developed for the area of the metropolitan city of Milan, Northern Italy. The model is implemented on a GIS platform, which already contains (i) the structure of the urban drainage network of the metropolitan city of Milan; (ii) the database of actual geomorphological and meteorological data for the previous domain (iii) the list of potential GIs, their standard size, installation and maintenance costs. Therefore, MOBIDIC-U provides an easy to use tool to local professionals to design and evaluate urban stormwater management measures based on GIs.

A GIS-based approach for identifying potential runoff harvesting sites in the Thukela River basin, South Africa

NASA Astrophysics Data System (ADS)

de Winnaar, G.; Jewitt, G. P. W.; Horan, M.

Water scarce countries such as South Africa are subject to various hydrological constraints which can often be attributed to poor rainfall partitioning, particularly within resource poor farming communities that are reliant on rainfed agriculture. Recent initiatives to address this have shifted focus to explore more efficient alternatives to water supply and the recognition of numerous opportunities to implement runoff harvesting as a means to supplement water availability. However, increasing the implementation of runoff harvesting, without encountering unintended impacts on downstream hydrological and ecological systems, requires better understanding of the hydrologic and environmental impacts at catchment scale. In this paper the representation of spatial variations in landscape characteristics such as soil, land use, rainfall and slope information is shown to be an important step in identifying potential runoff harvesting sites, after which modelling the hydrological response in catchments where extensive runoff harvesting is being considered can be performed and likely impacts assessed. Geographic information systems (GIS) was utilised as an integrating tool to store, analyse and manage spatial information and when linked to hydrological response models, provided a rational means to facilitate decision making by providing catchment level identification, planning and assessment of runoff harvesting sites as illustrated by a case study at the Potshini catchment, a small sub-catchment in the Thukela River basin, South Africa. Through the linked GIS, potential runoff harvesting sites are identified relative to areas that concentrate runoff and where the stored water will be appropriately distributed. Based on GIS analysis it was found that 17% percent of the Potshini catchment area has a high potential for generating surface runoff, whereas an analysis of all factors which influence the location of such systems, shows that 18% is highly suitable for runoff harvesting. Details of the spatially explicit method that was adopted in this paper are provided and output from the integrated GIS modelling system is presented using suitability maps. It is concluded that providing an accurate spatial representation of the runoff generation potential within a catchment is an important step in developing a strategic runoff harvesting plan for any catchment.

Coupling transfer function and GIS for assessing non-point-source groundwater vulnerability at regional scale

NASA Astrophysics Data System (ADS)

Coppola, A.; Comegna, V.; de Simone, L.

2009-04-01

Non-point source (NPS) pollution in the vadose zone is a global environmental problem. The knowledge and information required to address the problem of NPS pollutants in the vadose zone cross several technological and sub disciplinary lines: spatial statistics, geographic information systems (GIS), hydrology, soil science, and remote sensing. The main issues encountered by NPS groundwater vulnerability assessment, as discussed by Stewart [2001], are the large spatial scales, the complex processes that govern fluid flow and solute transport in the unsaturated zone, the absence of unsaturated zone measurements of diffuse pesticide concentrations in 3-D regional-scale space as these are difficult, time consuming, and prohibitively costly, and the computational effort required for solving the nonlinear equations for physically-based modeling of regional scale, heterogeneous applications. As an alternative solution, here is presented an approach that is based on coupling of transfer function and GIS modeling that: a) is capable of solute concentration estimation at a depth of interest within a known error confidence class; b) uses available soil survey, climatic, and irrigation information, and requires minimal computational cost for application; c) can dynamically support decision making through thematic mapping and 3D scenarios This result was pursued through 1) the design and building of a spatial database containing environmental and physical information regarding the study area, 2) the development of the transfer function procedure for layered soils, 3) the final representation of results through digital mapping and 3D visualization. One side GIS modeled environmental data in order to characterize, at regional scale, soil profile texture and depth, land use, climatic data, water table depth, potential evapotranspiration; on the other side such information was implemented in the up-scaling procedure of the Jury's TFM resulting in a set of texture based travel time probability density functions for layered soils each describing a characteristic leaching behavior for soil profiles with similar hydraulic properties. Such behavior, in terms of solute travel time to water table, was then imported back into GIS and finally estimation groundwater vulnerability for each soil unit was represented into a map as well as visualized in 3D.

Assessment of ecological passages along road networks within the Mediterranean forest using GIS-based multi criteria evaluation approach.

PubMed

Gülci, Sercan; Akay, Abdullah Emin

2015-12-01

Major roads cause barrier effect and fragmentation on wildlife habitats that are suitable places for feeding, mating, socializing, and hiding. Due to wildlife collisions (Wc), human-wildlife conflicts result in lost lives and loss of biodiversity. Geographical information system (GIS)-based multi criteria evaluation (MCE) methods have been successfully used in short-term planning of road networks considering wild animals. Recently, wildlife passages have been effectively utilized as road engineering structures provide quick and certain solutions for traffic safety and wildlife conservation problems. GIS-based MCE methods provide decision makers with optimum location for ecological passages based on habitat suitability models (HSMs) that classify the areas based on ecological requirements of target species. In this study, ecological passages along Motorway 52 within forested areas in Mediterranean city of Osmaniye in Turkey were evaluated. Firstly, HSM coupled with nine eco-geographic decision variables were developed based on ecological requirements of roe deer (Capreolus capreolus) that were chosen as target species. Then specified decision variables were evaluated using GIS-based weighted linear combination (WLC) method to estimate movement corridors and mitigation points along the motorway. In the solution process, two linkage nodes were evaluated for eco-passages which were determined based on the least-cost movement corridor intersecting with the motorway. One of the passages was identified as a natural wildlife overpass while the other was suggested as underpass construction. The results indicated that computer-based models provide accurate and quick solutions for positioning ecological passages to reduce environmental effects of road networks on wild animals.

Petroleum resource potential GIS of northern Afghanistan

USGS Publications Warehouse

Steinshouer, Douglas W.; Klett, Timothy R.; Ulmishek, Gregory F.; Wandrey, Craig J.; Wahl, Ronald R.; Hill, Ronald J.; Pribil, Michael J.; Pawlewicz, Mark J.; King, J. David; Agena, Warren F.; Taylor, David J.; Amirzada, Abdulla; Selab, Amir Mohammad; Mutteh, Abdul-Salam; Haidari, Ghulam Naqshband; Wardak, Moeengul Gullabudeen

2006-01-01

The CD-ROM contains an ESRI ArcReader format GIS project presenting the results of a petroleum resource assessment of Northern Afghanistan, and other data used in the petroleum assessment. Geologic, structural, field, well, political, and other GIS layers covering Afghanistan, Northern Afghanistan and adjacent areas, along with associated geochemical and other data tables pertinent to a petroleum assessment are included. The purpose of this GIS is to provide the basic data layers and tables required to support the petroleum assessment, data for further exploration and development, and an index of known data.

Coupling groundwater and riparian vegetation models to assess effects of reservoir releases

USGS Publications Warehouse

Springer, Abraham E.; Wright, Julie M.; Shafroth, Patrick B.; Stromberg, Juliet C.; Patten, Duncan T.

1999-01-01

Although riparian areas in the arid southwestern United States are critical for maintaining species diversity, their extent and health have been declining since Euro‐American settlement. The purpose of this study was to develop a methodology to evaluate the potential for riparian vegetation restoration and groundwater recharge. A numerical groundwater flow model was coupled with a conceptual riparian vegetation model to predict hydrologic conditions favorable to maintaining riparian vegetation downstream of a reservoir. A Geographic Information System (GIS) was used for this one‐way coupling. Constant and seasonally varying releases from the dam were simulated using volumes anticipated to be permitted by a regional water supplier. Simulations indicated that seasonally variable releases would produce surface flow 5.4–8.5 km below the dam in a previously dry reach. Using depth to groundwater simulations from the numerical flow model with conceptual models of depths to water necessary for maintenance of riparian vegetation, the GIS analysis predicted a 5‐ to 6.5‐fold increase in the area capable of sustaining riparian vegetation.