Malaligned dynamic anterior cervical plate: a biomechanical analysis of effectiveness.

PubMed

Lawrence, Brandon D; Patel, Alpesh A; Guss, Andrew; Ryan Spiker, W; Brodke, Darrel S

2014-12-01

Biomechanical evaluation. To evaluate the kinematic and load-sharing differences of dynamic anterior cervical plates when placed in-line at 0° and off-axis at 20°. The use of dynamic anterior cervical plating systems has recently gained popularity due to the theoretical benefit of improved load sharing with graft subsidence. Occasionally, due to anatomical restraints, the anterior cervical plate may be placed off-axis in the coronal plane. This may potentially decrease the dynamization capability of the plate, leading to less load sharing and potentially decreased fusion rates. The purpose of this study was to comprehensively evaluate the kinematic and load-sharing differences of a dynamic plate placed in-line versus off-axis in the coronal plane. Thirteen fresh-frozen human cadaveric cervical spines (C2-T1) were used. Nondestructive range-of-motion testing was performed with a pneumatically controlled spine simulator in flexion/extension, lateral bending, and axial rotation using the OptoTrak motion measurement system. A C5 corpectomy was performed, and a custom interbody spacer with an integrated load cell collected load-sharing data under axial compression at varying loads. A dynamic anterior cervical plate was placed in-line at 0° and then off-axis at 20°. Testing conditions ensued using a full-length spacer, followed by simulated subsidence by removing 10% of the height of the original spacer. There were no kinematic differences noted in the in-line model versus the off-axis model. After simulated subsidence, the small decreases in stiffness and increases in motion were similar whether the plate was placed in-line or off-axis in all 3 planes of motion. There were also no significant differences in the load-sharing characteristics of the in-line plate versus the off-axis plate in either the full-length model or the subsided interbody model. This study suggests that off-axis dynamic plate positioning does not significantly impact construct kinematics or graft load sharing. As such, we do not recommend removal or repositioning of an off-axis placed dynamic plate because the kinematic and load-sharing biomechanical properties are similar. N/A.

Load-sharing through elastic micro-motion accelerates bone formation and interbody fusion.

PubMed

Ledet, Eric H; Sanders, Glenn P; DiRisio, Darryl J; Glennon, Joseph C

2018-02-13

Achieving a successful spinal fusion requires the proper biological and biomechanical environment. Optimizing load-sharing in the interbody space can enhance bone formation. For anterior cervical discectomy and fusion (ACDF), loading and motion are largely dictated by the stiffness of the plate, which can facilitate a balance between stability and load-sharing. The advantages of load-sharing may be substantial for patients with comorbidities and in multilevel procedures where pseudarthrosis rates are significant. We aimed to evaluate the efficacy of a novel elastically deformable, continuously load-sharing anterior cervical spinal plate for promotion of bone formation and interbody fusion relative to a translationally dynamic plate. An in vivo animal model was used to evaluate the effects of an elastically deformable spinal plate on bone formation and spine fusion. Fourteen goats underwent an ACDF and received either a translationally dynamic or elastically deformable plate. Animals were followed up until 18 weeks and were evaluated by plain x-ray, computed tomography scan, and undecalcified histology to evaluate the rate and quality of bone formation and interbody fusion. Animals treated with the elastically deformable plate demonstrated statistically significantly superior early bone formation relative to the translationally dynamic plate. Trends in the data from 8 to 18 weeks postoperatively suggest that the elastically deformable implant enhanced bony bridging and fusion, but these enhancements were not statistically significant. Load-sharing through elastic micro-motion accelerates bone formation in the challenging goat ACDF model. The elastically deformable implant used in this study may promote early bony bridging and increased rates of fusion, but future studies will be necessary to comprehensively characterize the advantages of load-sharing through micro-motion. Copyright © 2018 The Authors. Published by Elsevier Inc. All rights reserved.

Planetary Load Sharing in Three-Point Mounted Wind Turbine Gearboxes: A Design and Test Comparison

DOE Office of Scientific and Technical Information (OSTI.GOV)

Keller, Jonathan; Guo, Yi; Zhang, Zhiwei

This work compares the planetary load-sharing characteristics of wind turbine gearboxes supported by cylindrical roller bearings (CRBs) and preloaded tapered roller bearings (TRBs) when subjected to rotor moments. Planetary bearing loads were measured in field-representative dynamometer tests and compared to loads predicted by finite-element models. Preloaded TRBs significantly improved load sharing. In pure torque conditions, the upwind planet bearing load in the gearbox with preloaded TRBs was only 14% more than the assumed load compared to 47% more for the gearbox with CRBs. Consequently, the predicted fatigue life of the complete set of planetary bearings for the gearbox with preloadedmore » TRBs is 3.5 times greater than that of the gearbox with CRBs.« less

Patellar fixation protected with a load-sharing cable: a mechanical and clinical study.

PubMed

Perry, C R; McCarthy, J A; Kain, C C; Pearson, R L

1988-01-01

The stability of patellar fracture fixation protected with a load-sharing cable was studied in cadavers. A transverse patellar osteotomy was produced and stabilized with standard patellar fixation with or without a figure-of-eight cable that extends from the proximal pole of the patella to the tibial tubercle. Standard fixation techniques (interfragmentary cancellous screws or modified tension-band wiring) alone failed after significantly fewer cycles of flexion and extension than did the same fixation when supplemented with a load-sharing cable. In the clinical evaluation of the load-sharing cable, 14 consecutive patients with displaced patellar fractures were treated. No immobilization was used and the patients were started on passive and active range of motion and weight-bearing ambulation in the early postoperative period. Thirteen fractures healed uneventfully. The increased stability of patellar fracture fixation protected with a load-sharing cable offers three advantages: (a) adjunctive casting is unnecessary, (b) comminuted fractures can be "pieced" together anatomically with less concern for loss of fixation, and (c) early postoperative passive and active range of motion can be achieved.

Attention and Visuospatial Working Memory Share the Same Processing Resources

PubMed Central

Feng, Jing; Pratt, Jay; Spence, Ian

2012-01-01

Attention and visuospatial working memory (VWM) share very similar characteristics; both have the same upper bound of about four items in capacity and they recruit overlapping brain regions. We examined whether both attention and VWM share the same processing resources using a novel dual-task costs approach based on a load-varying dual-task technique. With sufficiently large loads on attention and VWM, considerable interference between the two processes was observed. A further load increase on either process produced reciprocal increases in interference on both processes, indicating that attention and VWM share common resources. More critically, comparison among four experiments on the reciprocal interference effects, as measured by the dual-task costs, demonstrates no significant contribution from additional processing other than the shared processes. These results support the notion that attention and VWM share the same processing resources. PMID:22529826

Application of Face-Gear Drives in Helicopter Transmissions

NASA Technical Reports Server (NTRS)

Litvin, F. L.; Wang, J.-C.; Bossler, R. B., Jr.; Chen, Y.-J. D.; Heath, G.; Lewicki, D. G.

1992-01-01

The use of face gears in helicopter transmissions was explored. A light-weight, split torque transmission design utilizing face gears was described. Face-gear design and geometry were investigated. Topics included tooth generation, limiting inner and outer radii, tooth contact analysis, contact ratio, gear eccentricity, and structural stiffness. Design charts were developed to determine minimum and maximum face-gear inner and outer radii. Analytical study of transmission error showed face-gear drives were relatively insensitive to gear misalignment, but tooth contact was affected by misalignment. A method of localizing bearing contact to compensate for misalignment was explored. The proper choice of shaft support stiffness enabled good load sharing in the split torque transmission design. Face-gear experimental studies were also included and the feasibility of face gears in high-speed, high-load applications such as helicopter transmissions was demonstrated.

Design, development and test of a capillary pump loop heat pipe

NASA Technical Reports Server (NTRS)

Kroliczek, E. J.; Ku, J.; Ollendorf, S.

1984-01-01

The development of a capillary pump loop (CPL) heat pipe, including computer modeling and breadboard testing, is presented. The computer model is a SINDA-type thermal analyzer, combined with a pressure analyzer, which predicts the transients of the CPL heat pipe during operation. The breadboard is an aluminum/ammonia transport system which contains multiple parallel evaporator and condenser zones within a single loop. Test results have demonstrated the practicality and reliability of such a design, including heat load sharing among evaporators, liquid inventory/temperature control feature, and priming under load. Transport capability for this system is 65 KW-M with individual evaporator pumps managing up to 1.7 KW at a heat flux of 15 W/sq cm. The prediction of the computer model for heat transport capabilities is in good agreement with experimental results.

Expert Systems on Multiprocessor Architectures. Volume 3. Technical Reports

DTIC Science & Technology

1991-06-01

choice of load balancing vs. load sharing 1141. While load balancing strives to keep all sites equally loaded, load sharing merely tries to prevent ...unnecessary idleness. Loo. balancing is appropriate to object- oriented real- time systems because * real-time systems ne ,l to prevent long waits for...oetavir ConClass siy51cr Iz a n ubjeU rephitation ’-enare ir order wo prevent a partic=Lar abiec:;ram heing (ntrlu ~lel Ar iic]en:f etautaan ire chanw

Fatigue test of a fiberglass based composite panel. Increasing the lifetime of freight wagon

NASA Astrophysics Data System (ADS)

Sobek, M.; Baier, A.; Grabowski, Ł.; Majzner, M.

2016-08-01

In the XXI century transportation of goods plays a key role in the economy. Due to a good logistics the economy is able to grow fluently. Although land transportation is carried out mainly through trucks for the last several years there has been noted an increase in the percentage share of rail transport in the freight transport. The main goods transported by railways are mineral fuels, mining and quarrying products. They constitute the greater part of 70% of total transported goods. Transportation of material of such high weight, high hardness and with different shapes involves increased and accelerated wear and tear of the cargo space of the wagon. This process is also magnified by substances used to prevent overheating or goods theft. Usually they are in the form of chemical compounds powder, eg. Calcium. A very large impact on the wear of the freight wagons hull is made because of mechanical damage. Their source comes mostly from loading cargo with impetus and using heavy machines during unloading. A large number of cycles of loading and unloading during the working period causes abrasion of body and as a result after several years a wagon car qualifies for a major maintenance. Possibility of application composite panels in the process of renovating the wagons body could reduce the weight of whole train and prolong the service life between mandatory technical inspection. The Paper "Fatigue test of a fiberglass based composite panel. Increasing the lifetime of freight wagon" presents the research process and the results of the endurance test of the composite panel samples fixed to a metal plate. As a fixing method a stainless steel rivet nut and a stainless steel button head socket screws were chosen. Cyclic and multiple load were applied to test samples using a pneumatic cylinder. Such a methodology simulated the forces resulting from loading and unloading of the wagon and movement of the cargo during transport. In the study a dedicated stand equipped with a pneumatic cylinder and a strain gauge sensors was used. A logic controller to control pneumatic valves was used. Tests were carried out for different number of cycles. The paper contains the results and conclusions which will be useful for the actual application of composite panels on the hull of a freight wagon.

Effects of inter-individual lumbar spine geometry variation on load-sharing: Geometrically personalized Finite Element study.

PubMed

Naserkhaki, Sadegh; Jaremko, Jacob L; El-Rich, Marwan

2016-09-06

There is a large, at times contradictory, body of research relating spinal curvature to Low Back Pain (LBP). Mechanical load is considered as important factor in LBP etiology. Geometry of the spinal structures and sagittal curvature of the lumbar spine govern its mechanical behavior. Thus, understanding how inter-individual geometry particularly sagittal curvature variation affects the spinal load-sharing becomes of high importance in LBP assessment. This study calculated and compared kinematics and load-sharing in three ligamentous lumbosacral spines: one hypo-lordotic (Hypo-L) with low lordosis, one normal-lordotic (Norm-L) with normal lordosis, and one hyper-lordotic (Hyper-L) with high lordosis in flexed and extended postures using 3D nonlinear Finite Element (FE) modeling. These postures were simulated by applying Follower Load (FL) combined with flexion or extension moment. The Hypo-L spine demonstrated stiffer behavior in flexion but more flexible response to extension compared to the Norm-L spine. The excessive lordosis stiffened response of the Hyper-L spine to extension but did not affect its resistance to flexion compared to the Norm-L spine. Despite the different resisting actions of the posterior ligaments to flexion moment, the increase of disc compression was similar in all the spines leading to similar load-sharing. However, resistance of the facet joints to extension was more important in the Norm- and Hyper-L spines which reduced the disc compression. The spinal curvature strongly influenced the magnitude and location of load on the spinal components and also altered the kinematics and load-sharing particularly in extension. Consideration of the subject-specific geometry and sagittal curvature should be an integral part of mechanical analysis of the lumbar spine. Copyright © 2016 Elsevier Ltd. All rights reserved.

Effect of perceptual load on conceptual processing: an extension of Vermeulen's theory.

PubMed

Xie, Jiushu; Wang, Ruiming; Sun, Xun; Chang, Song

2013-10-01

The effect of color and shape load on conceptual processing was studied. Perceptual load effects have been found in visual and auditory conceptual processing, supporting the theory of embodied cognition. However, whether different types of visual concepts, such as color and shape, share the same perceptual load effects is unknown. In the current experiment, 32 participants were administered simultaneous perceptual and conceptual tasks to assess the relation between perceptual load and conceptual processing. Keeping color load in mind obstructed color conceptual processing. Hence, perceptual processing and conceptual load shared the same resources, suggesting embodied cognition. Color conceptual processing was not affected by shape pictures, indicating that different types of properties within vision were separate.

High-frequency ac power distribution in Space Station

NASA Technical Reports Server (NTRS)

Tsai, Fu-Sheng; Lee, Fred C. Y.

1990-01-01

A utility-type 20-kHz ac power distribution system for the Space Station, employing resonant power-conversion techniques, is presented. The system converts raw dc voltage from photovoltaic cells or three-phase LF ac voltage from a solar dynamic generator into a regulated 20-kHz ac voltage for distribution among various loads. The results of EASY5 computer simulations of the local and global performance show that the system has fast response and good transient behavior. The ac bus voltage is effectively regulated using the phase-control scheme, which is demonstrated with both line and load variations. The feasibility of paralleling the driver-module outputs is illustrated with the driver modules synchronized and sharing a common feedback loop. An HF sinusoidal ac voltage is generated in the three-phase ac input case, when the driver modules are phased 120 deg away from one another and their outputs are connected in series.

Concurrent working memory load can facilitate selective attention: evidence for specialized load.

PubMed

Park, Soojin; Kim, Min-Shik; Chun, Marvin M

2007-10-01

Load theory predicts that concurrent working memory load impairs selective attention and increases distractor interference (N. Lavie, A. Hirst, J. W. de Fockert, & E. Viding). Here, the authors present new evidence that the type of concurrent working memory load determines whether load impairs selective attention or not. Working memory load was paired with a same/different matching task that required focusing on targets while ignoring distractors. When working memory items shared the same limited-capacity processing mechanisms with targets in the matching task, distractor interference increased. However, when working memory items shared processing with distractors in the matching task, distractor interference decreased, facilitating target selection. A specialized load account is proposed to describe the dissociable effects of working memory load on selective processing depending on whether the load overlaps with targets or with distractors. (c) 2007 APA

Simulation of load-sharing in standalone distributed generation system

NASA Astrophysics Data System (ADS)

Ajewole, Titus O.; Craven, Robert P. M.; Kayode, Olakunle; Babalola, Olufisayo S.

2018-05-01

This paper presents a study on load-sharing among the component generating units of a multi-source electric microgrid that is operated as an autonomous ac supply-mode system. Emerging trend in power system development permits deployment of microgrids for standalone or stand-by applications, thereby requiring active- and reactive power sharing among the discrete generating units contained in hybrid-source microgrids. In this study, therefore, a laboratory-scale model of a microgrid energized with three renewable energy-based sources is employed as a simulation platform to investigate power sharing among the power-generating units. Each source is represented by a source emulator that captures the real operational characteristics of the mimicked generating unit and, with implementation of real-life weather data and load profiles on the model; the sharing of the load among the generating units is investigated. There is a proportionate generation of power by the three source emulators, with their frequencies perfectly synchronized at the point of common coupling as a result of balance flow of power among them. This hybrid topology of renewable energy-based microgrid could therefore be seamlessly adapted into national energy mix by the indigenous electric utility providers in Nigeria.

Analysis of dynamic behavior of multiple-stage planetary gear train used in wind driven generator.

PubMed

Wang, Jungang; Wang, Yong; Huo, Zhipu

2014-01-01

A dynamic model of multiple-stage planetary gear train composed of a two-stage planetary gear train and a one-stage parallel axis gear is proposed to be used in wind driven generator to analyze the influence of revolution speed and mesh error on dynamic load sharing characteristic based on the lumped parameter theory. Dynamic equation of the model is solved using numerical method to analyze the uniform load distribution of the system. It is shown that the load sharing property of the system is significantly affected by mesh error and rotational speed; load sharing coefficient and change rate of internal and external meshing of the system are of obvious difference from each other. The study provides useful theoretical guideline for the design of the multiple-stage planetary gear train of wind driven generator.

Analysis of Dynamic Behavior of Multiple-Stage Planetary Gear Train Used in Wind Driven Generator

PubMed Central

Wang, Jungang; Wang, Yong; Huo, Zhipu

2014-01-01

A dynamic model of multiple-stage planetary gear train composed of a two-stage planetary gear train and a one-stage parallel axis gear is proposed to be used in wind driven generator to analyze the influence of revolution speed and mesh error on dynamic load sharing characteristic based on the lumped parameter theory. Dynamic equation of the model is solved using numerical method to analyze the uniform load distribution of the system. It is shown that the load sharing property of the system is significantly affected by mesh error and rotational speed; load sharing coefficient and change rate of internal and external meshing of the system are of obvious difference from each other. The study provides useful theoretical guideline for the design of the multiple-stage planetary gear train of wind driven generator. PMID:24511295

Controllable load sharing for soft adhesive interfaces on three-dimensional surfaces.

PubMed

Song, Sukho; Drotlef, Dirk-Michael; Majidi, Carmel; Sitti, Metin

2017-05-30

For adhering to three-dimensional (3D) surfaces or objects, current adhesion systems are limited by a fundamental trade-off between 3D surface conformability and high adhesion strength. This limitation arises from the need for a soft, mechanically compliant interface, which enables conformability to nonflat and irregularly shaped surfaces but significantly reduces the interfacial fracture strength. In this work, we overcome this trade-off with an adhesion-based soft-gripping system that exhibits enhanced fracture strength without sacrificing conformability to nonplanar 3D surfaces. Composed of a gecko-inspired elastomeric microfibrillar adhesive membrane supported by a pressure-controlled deformable gripper body, the proposed soft-gripping system controls the bonding strength by changing its internal pressure and exploiting the mechanics of interfacial equal load sharing. The soft adhesion system can use up to ∼26% of the maximum adhesion of the fibrillar membrane, which is 14× higher than the adhering membrane without load sharing. Our proposed load-sharing method suggests a paradigm for soft adhesion-based gripping and transfer-printing systems that achieves area scaling similar to that of a natural gecko footpad.

Controllable load sharing for soft adhesive interfaces on three-dimensional surfaces

NASA Astrophysics Data System (ADS)

Song, Sukho; Drotlef, Dirk-Michael; Majidi, Carmel; Sitti, Metin

2017-05-01

For adhering to three-dimensional (3D) surfaces or objects, current adhesion systems are limited by a fundamental trade-off between 3D surface conformability and high adhesion strength. This limitation arises from the need for a soft, mechanically compliant interface, which enables conformability to nonflat and irregularly shaped surfaces but significantly reduces the interfacial fracture strength. In this work, we overcome this trade-off with an adhesion-based soft-gripping system that exhibits enhanced fracture strength without sacrificing conformability to nonplanar 3D surfaces. Composed of a gecko-inspired elastomeric microfibrillar adhesive membrane supported by a pressure-controlled deformable gripper body, the proposed soft-gripping system controls the bonding strength by changing its internal pressure and exploiting the mechanics of interfacial equal load sharing. The soft adhesion system can use up to ˜26% of the maximum adhesion of the fibrillar membrane, which is 14× higher than the adhering membrane without load sharing. Our proposed load-sharing method suggests a paradigm for soft adhesion-based gripping and transfer-printing systems that achieves area scaling similar to that of a natural gecko footpad.

Controllable load sharing for soft adhesive interfaces on three-dimensional surfaces

PubMed Central

Song, Sukho; Drotlef, Dirk-Michael; Majidi, Carmel; Sitti, Metin

2017-01-01

For adhering to three-dimensional (3D) surfaces or objects, current adhesion systems are limited by a fundamental trade-off between 3D surface conformability and high adhesion strength. This limitation arises from the need for a soft, mechanically compliant interface, which enables conformability to nonflat and irregularly shaped surfaces but significantly reduces the interfacial fracture strength. In this work, we overcome this trade-off with an adhesion-based soft-gripping system that exhibits enhanced fracture strength without sacrificing conformability to nonplanar 3D surfaces. Composed of a gecko-inspired elastomeric microfibrillar adhesive membrane supported by a pressure-controlled deformable gripper body, the proposed soft-gripping system controls the bonding strength by changing its internal pressure and exploiting the mechanics of interfacial equal load sharing. The soft adhesion system can use up to ∼26% of the maximum adhesion of the fibrillar membrane, which is 14× higher than the adhering membrane without load sharing. Our proposed load-sharing method suggests a paradigm for soft adhesion-based gripping and transfer-printing systems that achieves area scaling similar to that of a natural gecko footpad. PMID:28507143

Reliability demonstration test for load-sharing systems with exponential and Weibull components

PubMed Central

Hu, Qingpei; Yu, Dan; Xie, Min

2017-01-01

Conducting a Reliability Demonstration Test (RDT) is a crucial step in production. Products are tested under certain schemes to demonstrate whether their reliability indices reach pre-specified thresholds. Test schemes for RDT have been studied in different situations, e.g., lifetime testing, degradation testing and accelerated testing. Systems designed with several structures are also investigated in many RDT plans. Despite the availability of a range of test plans for different systems, RDT planning for load-sharing systems hasn’t yet received the attention it deserves. In this paper, we propose a demonstration method for two specific types of load-sharing systems with components subject to two distributions: exponential and Weibull. Based on the assumptions and interpretations made in several previous works on such load-sharing systems, we set the mean time to failure (MTTF) of the total system as the demonstration target. We represent the MTTF as a summation of mean time between successive component failures. Next, we introduce generalized test statistics for both the underlying distributions. Finally, RDT plans for the two types of systems are established on the basis of these test statistics. PMID:29284030

Reliability demonstration test for load-sharing systems with exponential and Weibull components.

PubMed

Xu, Jianyu; Hu, Qingpei; Yu, Dan; Xie, Min

2017-01-01

Conducting a Reliability Demonstration Test (RDT) is a crucial step in production. Products are tested under certain schemes to demonstrate whether their reliability indices reach pre-specified thresholds. Test schemes for RDT have been studied in different situations, e.g., lifetime testing, degradation testing and accelerated testing. Systems designed with several structures are also investigated in many RDT plans. Despite the availability of a range of test plans for different systems, RDT planning for load-sharing systems hasn't yet received the attention it deserves. In this paper, we propose a demonstration method for two specific types of load-sharing systems with components subject to two distributions: exponential and Weibull. Based on the assumptions and interpretations made in several previous works on such load-sharing systems, we set the mean time to failure (MTTF) of the total system as the demonstration target. We represent the MTTF as a summation of mean time between successive component failures. Next, we introduce generalized test statistics for both the underlying distributions. Finally, RDT plans for the two types of systems are established on the basis of these test statistics.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Guo, Yi; Keller, Jonathan; Zhang, Zhiwei

The planetary load sharing characteristics of wind turbine gearboxes supported by cylindrical roller bearings (CRBs) and preloaded tapered roller bearings (TRBs) when subjected to rotor moments are compared in this work. Planetary bearing loads were measured in field-representative dynamometer tests and compared to loads predicted by finite-element models. Load sharing was significantly improved with preloaded TRBs. In pure torque conditions, the upwind planet bearing loads in the gearbox with preloaded TRBs were a maximum of 1.14 compared to 1.47 in the gearbox with CRBs. Consequently, the predicted fatigue life of the complete set of planetary bearings for the gearbox withmore » preloaded TRBs is 3.5 times greater than that of the gearbox with CRBs.« less

[Effects of the verbal loading on laterality difference in visual field (author's transl)].

PubMed

Kawai, M

1980-02-01

In connection with the Kinsbourne's attention-model, the relation between the level of hemisphere sharing of loading task and the visual-laterality difference was examined under verbal loading conditions. The subjects were 13 (8 male and 5 female) right-handed college students. The loading tasks in Exp. I were the "same-different" judgment of Japanese hiragana alphabets and of triliteral hiragana words, and "true-false" judgment of short statements. In Exp. II, a procedure to eliminate configurational matching of the letters was followed. The results of the two experiments suggest that the visual-laterality effect occurs only when the level of hemisphere sharing of the loading task exceeds a certain lower bound.

Elastomeric load sharing device

NASA Technical Reports Server (NTRS)

Isabelle, Charles J. (Inventor); Kish, Jules G. (Inventor); Stone, Robert A. (Inventor)

1992-01-01

An elastomeric load sharing device, interposed in combination between a driven gear and a central drive shaft to facilitate balanced torque distribution in split power transmission systems, includes a cylindrical elastomeric bearing and a plurality of elastomeric bearing pads. The elastomeric bearing and bearing pads comprise one or more layers, each layer including an elastomer having a metal backing strip secured thereto. The elastomeric bearing is configured to have a high radial stiffness and a low torsional stiffness and is operative to radially center the driven gear and to minimize torque transfer through the elastomeric bearing. The bearing pads are configured to have a low radial and torsional stiffness and a high axial stiffness and are operative to compressively transmit torque from the driven gear to the drive shaft. The elastomeric load sharing device has spring rates that compensate for mechanical deviations in the gear train assembly to provide balanced torque distribution between complementary load paths of split power transmission systems.

Experimental Study of Split-Path Transmission Load Sharing

NASA Technical Reports Server (NTRS)

Krantz, Timothy L.; Delgado, Irebert R.

1996-01-01

Split-path transmissions are promising, attractive alternatives to the common planetary transmissions for helicopters. The split-path design offers two parallel paths for transmitting torque from the engine to the rotor. Ideally, the transmitted torque is shared equally between the two load paths; however, because of manufacturing tolerances, the design must be sized to allow for other than equal load sharing. To study the effect of tolerances, experiments were conducted using the NASA split-path test gearbox. Two gearboxes, nominally identical except for manufacturing tolerances, were tested. The clocking angle was considered to be a design parameter and used to adjust the load sharing of an otherwise fixed design. The torque carried in each path was measured for a matrix of input torques and clocking angles. The data were used to determine the optimal value and a tolerance for the clocking angles such that the most heavily loaded split path carried no greater than 53 percent of an input shaft torque of 367 N-m. The range of clocking angles satisfying this condition was -0.0012 +/- 0.0007 rad for box 1 and -0.0023 +/- 0.0009 rad for box 2. This study indicates that split-path gearboxes can be used successfully in rotorcraft and can be manufactured with existing technology.

Family medicine education in Canada, 1983.

PubMed

Hennen, B K

1983-12-01

We now have good information about family medicine in terms of content, principles, and practice load. Undergraduate, residency and continuing education are improving, but some family medicine programs still have limited support from their university's faculty and governments. Residency in-training assessment and the certification process are better developed than is evaluation of new family doctors' practice performance. Research in the family medicine base is expanding, and residents are increasingly involved in projects. Family medicine teachers are now on a par with other clinical faculty, because they must meet tougher criteria for appointment and promotion. The political leadership of family medicine education, shared by the College of Family Physicians of Canada and academic departments, requires strong consensus and persistent activity.

Face-gear drives: Design, analysis, and testing for helicopter transmission applications

NASA Technical Reports Server (NTRS)

Litvin, F. L.; Wang, J.-C.; Bossler, R. B., Jr.; Chen, Y.-J. D.; Heath, G.; Lewicki, D. G.

1992-01-01

The use of face-gears in helicopter transmissions was explored. A light-weight, split-torque transmission design utilizing face-gears is described. Face-gear design and geometry were investigated. Topics included tooth generation, limiting inner and outer radii, tooth contact analysis, contact ratio, gear eccentricity, grinding, and structural stiffness. Design charts were developed to determine minimum and maximum face-gear inner and outer radii. An analytical study showed that the face-gear drive is relatively insensitive to gear misalignment with respect to transmission errors, but the tooth contact is affected by misalignment. A method of localizing the bearing contact to permit operation with misalignment was explored. Two new methods for grinding of the face-gear tooth surfaces were also investigated. The proper choice of shaft stiffness enabled good load sharing in the split-torque transmission design. Face-gear experimental studies were also conducted. These tests demonstrated the feasibility of face-gears in high-speed, high-load applications such as helicopter transmissions.

A new kind of high durable traffic weighbridge based on FBG sensors

NASA Astrophysics Data System (ADS)

Zhou, Zhi; Liu, Jing; Li, Hui; Ou, Jinping

2005-05-01

Durability is the key problem of traditional traffic weighbridge based on electrical gauges. In this paper, a new kind of high durable traffic weighbridge based on FBG (Fiber Bragg Grating) sensors has been studied and developed. The principle of the smart FBG-weighbridge is based on that the traffic weight can be gotten from the deformation of the reinforced concrete beam with embedded FRP (Fiber Reinforced Polymer) - packaged FBG strain sensors. The FBG-based weighbridge is designed to be a reinforced concrete board supported by composite beams, and the truck load is shared by the composite beams. A 30-ton full scale FBG-based weighbridge has been set up, and the results from the tests and calibration analysis show that this kind of weighbridge features high durability, simplicity, convenience, low cost, etc. This new kind of FBG-based weighbridge shows good prospect in future to replace the traditional traffic weighbridge for long-term monitoring of traffic load.

A Load-Sharing Rip-Stop Fixation Construct for Arthroscopic Rotator Cuff Repair

PubMed Central

Denard, Patrick J.; Burkhart, Stephen S.

2012-01-01

Despite advancements in arthroscopic rotator cuff repair techniques, achieving tendon-to-bone healing can be difficult in the setting of poor-quality tendon. Moreover, medial tendon tears or tears with lateral tendon loss may preclude standard techniques. Rip-stop suture configurations have been shown to improve load to failure compared with simple or mattress stitch patterns and may be particularly valuable in these settings. The purpose of this report is to describe a technical modification of a rip-stop rotator cuff repair that combines the advantages of a rip-stop suture (by providing resistance to tissue cutout) and a double row of load-sharing suture anchors (minimizing the load per anchor and therefore the load per suture within each anchor). PMID:23766972

On Proportionate and Truthful International Alliance Contributions: An Analysis of IncentiveCompatible Cost Sharing Mechanisms to Burden Sharing

DTIC Science & Technology

2017-03-23

Therefore, the mecha- nism induces a stable cost sharing scheme wherein a subset of colluding players will not all benefit . In a subset of colluding...goods are not divisible and are not excludable. Cost sharing mechanisms specific to public goods have been researched extensively in the literature...Jackson & Moulin [1992] consider the sharing of cost for an indivisible public project among many players, and their work was extended by Bag [1997] to

Understanding the Effects of Databases as Cognitive Tools in a Problem-Based Multimedia Learning Environment

ERIC Educational Resources Information Center

Li, Rui; Liu, Min

2007-01-01

The purpose of this study is to examine the potential of using computer databases as cognitive tools to share learners' cognitive load and facilitate learning in a multimedia problem-based learning (PBL) environment designed for sixth graders. Two research questions were: (a) can the computer database tool share sixth-graders' cognitive load? and…

Creep of plain weave polymer matrix composites

NASA Astrophysics Data System (ADS)

Gupta, Abhishek

Polymer matrix composites are increasingly used in various industrial sectors to reduce structural weight and improve performance. Woven (also known as textile) composites are one class of polymer matrix composites with increasing market share mostly due to their lightweight, their flexibility to form into desired shape, their mechanical properties and toughness. Due to the viscoelasticity of the polymer matrix, time-dependent degradation in modulus (creep) and strength (creep rupture) are two of the major mechanical properties required by engineers to design a structure reliably when using these materials. Unfortunately, creep and creep rupture of woven composites have received little attention by the research community and thus, there is a dire need to generate additional knowledge and prediction models, given the increasing market share of woven composites in load bearing structural applications. Currently, available creep models are limited in scope and have not been validated for any loading orientation and time period beyond the experimental time window. In this thesis, an analytical creep model, namely the Modified Equivalent Laminate Model (MELM), was developed to predict tensile creep of plain weave composites for any orientation of the load with respect to the orientation of the fill and warp fibers, using creep of unidirectional composites. The ability of the model to predict creep for any orientation of the load is a "first" in this area. The model was validated using an extensive experimental involving the tensile creep of plain weave composites under varying loading orientation and service conditions. Plain weave epoxy (F263)/ carbon fiber (T300) composite, currently used in aerospace applications, was procured as fabrics from Hexcel Corporation. Creep tests were conducted under two loading conditions: on-axis loading (0°) and off-axis loading (45°). Constant load creep, in the temperature range of 80-240°C and stress range of 1-70% UTS of the composites, was experimentally evaluated for time periods ranging from 1--120 hours under both loading conditions. The composite showed increase in creep with increase in temperature and stress. Creep of composite increased with increase in angle of loading, from 1% under on-axis loading to 31% under off-axis loading, within the tested time window. The experimental creep data for plain weave composites were superposed using TTSP (Time Temperature Superposition Principle) to obtain a master curve of experimental data extending to several years and was compared with model predictions to validate the model. The experimental and model results were found in good agreement within an error range of +/-1-3% under both loading conditions. A parametric study was also conducted to understand the effect of microstructure of plain weave composites on its on-axis and off-axis creep. Generation of knowledge in this area is also "first". Additionally, this thesis generated knowledge on time-dependent damage m woven composites and its effect on creep and tensile properties and their prediction.

The topographic wetness index as a predictor for hot spots of DOC export from catchments

NASA Astrophysics Data System (ADS)

Musolff, Andreas; Oosterwoud, Marieke; Tittel, Jörg; Selle, Benny; Fleckenstein, Jan H.

2015-04-01

Dissolved organic carbon (DOC) concentrations in the discharge of many catchments in Europe and North America are rising. This increase is of concern for the drinking water supply from reservoirs since high DOC concentrations cause additional costs in water treatment and potentially the formation of harmful disinfection by-products. A prerequisite for understanding this increase is the knowledge on the spatial distribution of dominant soil DOC sources within catchments and on mobilization as well as transfer processes to the surface water. A number of studies identified wetland soils as the dominant source with fast mobilization and short transit times to the receiving surface water. However, most studies have either focussed on smaller, hillslope and single catchment or on larger scale multi-catchment assessments. Moreover, information on the distribution of soil types in catchments is not always readily available. This study brings together both types of assessment in a data-driven top-down approach: (i) a detailed survey on DOC concentration and loads over the course of one year within two paired data-rich catchments discharging into a large drinking water reservoir in central Germany and (ii) a database of hydrochemistry and physio-geographic characteristics of 113 catchments draining into 58 reservoirs across Germany over the course of 16 years. The objective is to define hot spots of DOC export within the catchments for both types of assessments (i, ii) and to test the suitability of the topographic wetness index (TWI) as a proxy for well-connected wetland soils at various spatial scales. In the sub-catchments of assessment (i) the spatial variability of concentrations and loads was much smaller than expected. None of the studied sub-catchments was a predominant producer of the total DOC loads exported from the catchments. We found the mean concentrations and loads to be positively correlated with the share of groundwater-dominated soils in the sub-catchments. These soils are distributed in riparian wetlands along all streams within the catchments. As a readily available proxy for wetland soils percentiles of the probability distribution of the TWI in the sub-catchments were found to be good predictors for mean DOC concentrations in catchment outlet as well as for loads. In the larger dataset across Germany (ii) we also found a surprisingly good correlation between the TWI within the catchments and mean DOC concentrations. Thus we can show that, despite the wide range of topographies, land use types, geological setups and climatic conditions within this dataset the dominant source zones of DOC export is well captured by the TWI as a proxy for the share of wetland soils and DOC source zones within the catchments.

A Review of Crashworthiness of Composite Aircraft Structures

DTIC Science & Technology

1990-02-01

proprietary, or other reaons . Details on the availability of these publications may be obtained from: Graphics Section, National Research Council Canada...bottoming out, good energy-absorbing and load-limiting ability, good post-crushing structural integrity and no significant load rate sensitivity. In a... good energy absorption capability under compressive loadings. However, under tensile or bending conditions, structural integrity may be lost at initial

Acid loading test (pH)

MedlinePlus

... medlineplus.gov/ency/article/003615.htm Acid loading test (pH) To use the sharing features on this page, please enable JavaScript. The acid loading test (pH) measures the ability of the kidneys to send ...

In vitro evaluation of stiffness and load sharing in a two-level corpectomy: comparison of static and dynamic cervical plates.

PubMed

Fogel, Guy R; Li, Zhenyu; Liu, Weiqiang; Liao, Zhenhua; Wu, Jia; Zhou, Wenyu

2010-05-01

Anterior cervical plating has been accepted in corpectomy and fusion of the cervical spine. Constrained plates were criticized for stress shielding that may lead to subsidence and pseudarthrosis. A dynamic plate allows load sharing as the graft subsides. Ideally, the dynamic plate design should maintain adequate stiffness of the construct while providing a reasonable load sharing with the strut graft. The purpose of the study was to compare dynamic and static plate kinematics with graft subsidence. The study designed was an in vitro biomechanical study in a porcine cervical spine model. Twelve spines were initially tested in intact condition with 20-N axial load in 15 degrees of flexion and extension range of motion (ROM). Then, a two-level corpectomy was created in all specimens with spines randomized to receive either a static or dynamic plate. The spines were retested under identical conditions with optimal length and undersized graft. Range of motion and graft loading were analyzed with a one-way analysis of variance (p<.05). Both plates significantly limited ROM compared with the intact spine in both graft length conditions. In extension graft, load was significantly higher (p=.001) in the static plate with optimal length, and in flexion, there was a significant loss of graft load (p=.0004). In flexion, the dynamic plate with undersized graft demonstrated significantly more load sustained (p=.0004). Both plates reasonably limited the ROM of the corpectomy. The static plate had significantly higher graft loads in extension and significant loss of graft load in flexion, whereas the dynamic plate maintained a reasonable graft load in ROM even when graft contact was imperfect. Copyright 2010 Elsevier Inc. All rights reserved.

El-Niño/Southern Oscillation (ENSO) influences on monthly NO 3 load and concentration, stream flow and precipitation in the Little River Watershed, Tifton, Georgia (GA)

NASA Astrophysics Data System (ADS)

Keener, V. W.; Feyereisen, G. W.; Lall, U.; Jones, J. W.; Bosch, D. D.; Lowrance, R.

2010-02-01

SummaryAs climate variability increases, it is becoming increasingly critical to find predictable patterns that can still be identified despite overall uncertainty. The El-Niño/Southern Oscillation is the best known pattern. Its global effects on weather, hydrology, ecology and human health have been well documented. Climate variability manifested through ENSO has strong effects in the southeast United States, seen in precipitation and stream flow data. However, climate variability may also affect water quality in nutrient concentrations and loads, and have impacts on ecosystems, health, and food availability in the southeast. In this research, we establish a teleconnection between ENSO and the Little River Watershed (LRW), GA., as seen in a shared 3-7 year mode of variability for precipitation, stream flow, and nutrient load time series. Univariate wavelet analysis of the NINO 3.4 index of sea surface temperature (SST) and of precipitation, stream flow, NO 3 concentration and load time series from the watershed was used to identify common signals. Shared 3-7 year modes of variability were seen in all variables, most strongly in precipitation, stream flow and nutrient load in strong El Niño years. The significance of shared 3-7 year periodicity over red noise with 95% confidence in SST and precipitation, stream flow, and NO 3 load time series was confirmed through cross-wavelet and wavelet-coherence transforms, in which common high power and co-variance were computed for each set of data. The strongest 3-7 year shared power was seen in SST and stream flow data, while the strongest co-variance was seen in SST and NO 3 load data. The strongest cross-correlation was seen as a positive value between the NINO 3.4 and NO 3 load with a three-month lag. The teleconnection seen in the LRW between the NINO 3.4 index and precipitation, stream flow, and NO 3 load can be utilized in a model to predict monthly nutrient loads based on short-term climate variability, facilitating management in high risk seasons.

A 10 bit 200 MS/s pipeline ADC using loading-balanced architecture in 0.18 μm CMOS

NASA Astrophysics Data System (ADS)

Wang, Linfeng; Meng, Qiao; Zhi, Hao; Li, Fei

2017-07-01

A new loading-balanced architecture for high speed and low power consumption pipeline analog-to-digital converter (ADC) is presented in this paper. The proposed ADC uses SHA-less, op-amp and capacitor-sharing technique, capacitor-scaling scheme to reduce the die area and power consumption. A new capacitor-sharing scheme was proposed to cancel the extra reset phase of the feedback capacitors. The non-standard inter-stage gain increases the feedback factor of the first stage and makes it equal to the second stage, by which, the load capacitor of op-amp shared by the first and second stages is balanced. As for the fourth stage, the capacitor and op-amp no longer scale down. From the system’s point of view, all load capacitors of the shared OTAs are balanced by employing a loading-balanced architecture. The die area and power consumption are optimized maximally. The ADC is implemented in a 0.18 μm 1P6M CMOS technology, and occupies a die area of 1.2 × 1.2 mm{}2. The measurement results show a 55.58 dB signal-to-noise-and-distortion ratio (SNDR) and 62.97 dB spurious-free dynamic range (SFDR) with a 25 MHz input operating at a 200 MS/s sampling rate. The proposed ADC consumes 115 mW at 200 MS/s from a 1.8 V supply.

A parallel algorithm for multi-level logic synthesis using the transduction method. M.S. Thesis

NASA Technical Reports Server (NTRS)

Lim, Chieng-Fai

1991-01-01

The Transduction Method has been shown to be a powerful tool in the optimization of multilevel networks. Many tools such as the SYLON synthesis system (X90), (CM89), (LM90) have been developed based on this method. A parallel implementation is presented of SYLON-XTRANS (XM89) on an eight processor Encore Multimax shared memory multiprocessor. It minimizes multilevel networks consisting of simple gates through parallel pruning, gate substitution, gate merging, generalized gate substitution, and gate input reduction. This implementation, called Parallel TRANSduction (PTRANS), also uses partitioning to break large circuits up and performs inter- and intra-partition dynamic load balancing. With this, good speedups and high processor efficiencies are achievable without sacrificing the resulting circuit quality.

Heuristic approaches for energy-efficient shared restoration in WDM networks

NASA Astrophysics Data System (ADS)

Alilou, Shahab

In recent years, there has been ongoing research on the design of energy-efficient Wavelength Division Multiplexing (WDM) networks. The explosive growth of Internet traffic has led to increased power consumption of network components. Network survivability has also been a relevant research topic, as it plays a crucial role in assuring continuity of service with no disruption, regardless of network component failure. Network survivability mechanisms tend to utilize considerable resources such as spare capacity in order to protect and restore information. This thesis investigates techniques for reducing energy demand and enhancing energy efficiency in the context of network survivability. We propose two novel heuristic energy-efficient shared protection approaches for WDM networks. These approaches intend to save energy by setting on sleep mode devices that are not being used while providing shared backup paths to satisfy network survivability. The first approach exploits properties of a math series in order to assign weight to the network links. It aims at reducing power consumption at the network indirectly by aggregating traffic on a set of nodes and links with high traffic load level. Routing traffic on links and nodes that are already under utilization makes it possible for the links and nodes with no load to be set on sleep mode. The second approach is intended to dynamically route traffic through nodes and links with high traffic load level. Similar to the first approach, this approach computes a pair of paths for every newly arrived demand. It computes these paths for every new demand by comparing the power consumption of nodes and links in the network before the demand arrives with their potential power consumption if they are chosen along the paths of this demand. Simulations of two different networks were used to compare the total network power consumption obtained using the proposed techniques against a standard shared-path restoration scheme. Shared-path restoration is a network survivability method in which a link-disjoint backup path and wavelength is reserved at the time of call setup for a working path. However, in order to reduce spare capacity consumption, this reserved backup path and wavelength may be shared with other backup paths. Pool Sharing Scheme (PSS) is employed to implement shared-path restoration scheme [1]. In an optical network, the failure of a single link leads to the failure of all the lightpaths that pass through that particular link. PSS ensures that the amount of backup bandwidth required on a link to restore the failed connections will not be more than the total amount of reserved backup bandwidth on that link. Simulation results indicate that the proposed approaches lead to up to 35% power savings in WDM networks when traffic load is low. However, power saving decreases to 14% at high traffic load level. Furthermore, in terms of the total capacity consumption for working paths, PSS outperforms the two proposed approaches, as expected. In terms of total capacity consumption all the approaches behave similarly. In general, at low traffic load level, the two proposed approaches behave similar to PSS in terms of average link load, and the ratio of block demands. Nevertheless, at high traffic load, the proposed approaches result in higher ratio of blocked demands than PSS. They also lead to higher average link load than PSS for the equal number of generated demands.

2H,3H-decafluoropentane-based nanodroplets: new perspectives for oxygen delivery to hypoxic cutaneous tissues.

PubMed

Prato, Mauro; Magnetto, Chiara; Jose, Jithin; Khadjavi, Amina; Cavallo, Federica; Quaglino, Elena; Panariti, Alice; Rivolta, Ilaria; Benintende, Emilio; Varetto, Gianfranco; Argenziano, Monica; Troia, Adriano; Cavalli, Roberta; Guiot, Caterina

2015-01-01

Perfluoropentane (PFP)-based oxygen-loaded nanobubbles (OLNBs) were previously proposed as adjuvant therapeutic tools for pathologies of different etiology sharing hypoxia as a common feature, including cancer, infection, and autoimmunity. Here we introduce a new platform of oxygen nanocarriers, based on 2H,3H-decafluoropentane (DFP) as core fluorocarbon. These new nanocarriers have been named oxygen-loaded nanodroplets (OLNDs) since DFP is liquid at body temperature, unlike gaseous PFP. Dextran-shelled OLNDs, available either in liquid or gel formulations, display spherical morphology, ~600 nm diameters, anionic charge, good oxygen carrying capacity, and no toxic effects on human keratinocytes after cell internalization. In vitro OLNDs result more effective in releasing oxygen to hypoxic environments than former OLNBs, as demonstrated by analysis through oxymetry. In vivo, OLNDs effectively enhance oxy-hemoglobin levels, as emerged from investigation by photoacoustic imaging. Interestingly, ultrasound (US) treatment further improves transdermal oxygen release from OLNDs. Taken together, these data suggest that US-activated, DFP-based OLNDs might be innovative, suitable and cost-effective devices to topically treat hypoxia-associated pathologies of the cutaneous tissues.

2H,3H-Decafluoropentane-Based Nanodroplets: New Perspectives for Oxygen Delivery to Hypoxic Cutaneous Tissues

PubMed Central

Jose, Jithin; Khadjavi, Amina; Cavallo, Federica; Quaglino, Elena; Panariti, Alice; Rivolta, Ilaria; Benintende, Emilio; Varetto, Gianfranco; Argenziano, Monica; Troia, Adriano; Cavalli, Roberta; Guiot, Caterina

2015-01-01

Perfluoropentane (PFP)-based oxygen-loaded nanobubbles (OLNBs) were previously proposed as adjuvant therapeutic tools for pathologies of different etiology sharing hypoxia as a common feature, including cancer, infection, and autoimmunity. Here we introduce a new platform of oxygen nanocarriers, based on 2H,3H-decafluoropentane (DFP) as core fluorocarbon. These new nanocarriers have been named oxygen-loaded nanodroplets (OLNDs) since DFP is liquid at body temperature, unlike gaseous PFP. Dextran-shelled OLNDs, available either in liquid or gel formulations, display spherical morphology, ~600 nm diameters, anionic charge, good oxygen carrying capacity, and no toxic effects on human keratinocytes after cell internalization. In vitro OLNDs result more effective in releasing oxygen to hypoxic environments than former OLNBs, as demonstrated by analysis through oxymetry. In vivo, OLNDs effectively enhance oxy-hemoglobin levels, as emerged from investigation by photoacoustic imaging. Interestingly, ultrasound (US) treatment further improves transdermal oxygen release from OLNDs. Taken together, these data suggest that US-activated, DFP-based OLNDs might be innovative, suitable and cost-effective devices to topically treat hypoxia-associated pathologies of the cutaneous tissues. PMID:25781463

Beyond Music Sharing: An Evaluation of Peer-to-Peer Data Dissemination Techniques in Large Scientific Collaborations

DOE Office of Scientific and Technical Information (OSTI.GOV)

Ripeanu, Matei; Al-Kiswany, Samer; Iamnitchi, Adriana

2009-03-01

The avalanche of data from scientific instruments and the ensuing interest from geographically distributed users to analyze and interpret it accentuates the need for efficient data dissemination. A suitable data distribution scheme will find the delicate balance between conflicting requirements of minimizing transfer times, minimizing the impact on the network, and uniformly distributing load among participants. We identify several data distribution techniques, some successfully employed by today's peer-to-peer networks: staging, data partitioning, orthogonal bandwidth exploitation, and combinations of the above. We use simulations to explore the performance of these techniques in contexts similar to those used by today's data-centric scientificmore » collaborations and derive several recommendations for efficient data dissemination. Our experimental results show that the peer-to-peer solutions that offer load balancing and good fault tolerance properties and have embedded participation incentives lead to unjustified costs in today's scientific data collaborations deployed on over-provisioned network cores. However, as user communities grow and these deployments scale, peer-to-peer data delivery mechanisms will likely outperform other techniques.« less

Prehension synergies: A study of digit force adjustments to the continuously varied load force exerted on a partially constrained hand-held object

PubMed Central

Friedman, Jason; Latash, Mark L.; Zatsiorsky, Vladimir M.

2009-01-01

We examined how the digit forces adjust when a load force acting on a hand-held object continuously varies. The subjects were required to hold the handle still while a linearly increasing and then decreasing force was applied to the handle. The handle was constrained, such that it could only move up and down, and rotate about a horizontal axis. In addition the moment arm of the thumb tangential force was 1.5 times the moment arm of the virtual finger (VF, an imagined finger with the mechanical action equal to that of the four fingers) force. Unlike the situation when there are equal moment arms, the experimental setup forced the subjects to choose between (a) sharing equally the increase in load force between the thumb and virtual finger but generating a moment of tangential force, which had to be compensated by negatively covarying the moment due to normal forces, or (b) sharing unequally the load force increase between the thumb and VF but preventing generation of a moment of tangential forces. We found that different subjects tended to use one of these two strategies. These findings suggest that the selection by the CNS of prehension synergies at the VF-thumb level with respect to the moment of force are non-obligatory and reflect individual subject preferences. This unequal sharing of the load by the tangential forces, in contrast to the previously observed equal sharing, suggests that the invariant feature of prehension may be a correlated increase in tangential forces rather than an equal increase. PMID:19554319

Psychometric properties of the SDM-Q-9 questionnaire for shared decision-making in multiple sclerosis: item response theory modelling and confirmatory factor analysis.

PubMed

Ballesteros, Javier; Moral, Ester; Brieva, Luis; Ruiz-Beato, Elena; Prefasi, Daniel; Maurino, Jorge

2017-04-22

Shared decision-making is a cornerstone of patient-centred care. The 9-item Shared Decision-Making Questionnaire (SDM-Q-9) is a brief self-assessment tool for measuring patients' perceived level of involvement in decision-making related to their own treatment and care. Information related to the psychometric properties of the SDM-Q-9 for multiple sclerosis (MS) patients is limited. The objective of this study was to assess the performance of the items composing the SDM-Q-9 and its dimensional structure in patients with relapsing-remitting MS. A non-interventional, cross-sectional study in adult patients with relapsing-remitting MS was conducted in 17 MS units throughout Spain. A nonparametric item response theory (IRT) analysis was used to assess the latent construct and dimensional structure underlying the observed responses. A parametric IRT model, General Partial Credit Model, was fitted to obtain estimates of the relationship between the latent construct and item characteristics. The unidimensionality of the SDM-Q-9 instrument was assessed by confirmatory factor analysis. A total of 221 patients were studied (mean age = 42.1 ± 9.9 years, 68.3% female). Median Expanded Disability Status Scale score was 2.5 ± 1.5. Most patients reported taking part in each step of the decision-making process. Internal reliability of the instrument was high (Cronbach's α = 0.91) and the overall scale scalability score was 0.57, indicative of a strong scale. All items, except for the item 1, showed scalability indices higher than 0.30. Four items (items 6 through to 9) conveyed more than half of the SDM-Q-9 overall information (67.3%). The SDM-Q-9 was a good fit for a unidimensional latent structure (comparative fit index = 0.98, root-mean-square error of approximation = 0.07). All freely estimated parameters were statistically significant (P < 0.001). All items presented standardized parameter estimates with salient loadings (>0.40) with the exception of item 1 which presented the lowest loading (0.26). Items 6 through to 8 were the most relevant items for shared decision-making. The SDM-Q-9 presents appropriate psychometric properties and is therefore useful for assessing different aspects of shared decision-making in patients with multiple sclerosis.

Are you happy for me? How sharing positive events with others provides personal and interpersonal benefits.

PubMed

Reis, Harry T; Smith, Shannon M; Carmichael, Cheryl L; Caprariello, Peter A; Tsai, Fen-Fang; Rodrigues, Amy; Maniaci, Michael R

2010-08-01

Sharing good news with others is one way that people can savor those experiences while building personal and interpersonal resources. Although prior research has established the benefits of this process, called capitalization, there has been little research and no experiments to examine the underlying mechanisms. In this article, we report results from 4 experiments and 1 daily diary study conducted to examine 2 mechanisms relevant to capitalization: that sharing good news with others increases the perceived value of those events, especially when others respond enthusiastically, and that enthusiastic responses to shared good news promote the development of trust and a prosocial orientation toward the other. These studies found consistent support for these effects across both interactions with strangers and in everyday close relationships.

Intramedullary nails with two lag screws.

PubMed

Brown, C J; Wang, C J; Yettram, A L; Procter, P

2004-06-01

To investigate the structural integrity of intramedullary nails with two lag screws, and to give guidance to orthopaedic surgeons in the choice of appropriate devices. Alternative designs of the construct are considered, and the use of a slotted upper lag screw insertion hole is analysed. Intramedullary fixation devices with a single lag screw have been known to fail at the lag screw insertion hole. Using two lag screws is considered. It has also been proposed to use a slot in the nail for the upper lag screw to prevent the upper lag screw from sticking. Bending and torsion load cases are analysed using finite element method. Consideration of both load conditions is essential. The results present the overall stiffness of the assembly, the load sharing between lag screws, and the possibility for cut-out to occur. While the slot for the upper lag screw might be advantageous with regard to the stresses in the lag screws, it could be detrimental for cut-out occurring adjacent to the lag screws. Comparative analyses demonstrate that two lag screws may be advantageous in patients whose cancellous bone quality is good and who impose large loads on the lag screw/nail interface. However, the use of two screws might pre-dispose to failure by cut-out of the lag screws. The addition of a slotted hole for the upper lag screw appears to do nothing significant to reduce the risk of such a failure. Copyright 2004 Elsevier Ltd.

Peer Norms and Sharing of Injection Paraphernalia among Puerto Rican Injection Drug Users in New York and Puerto Rico

ERIC Educational Resources Information Center

Andia, Jonny F.; Deren, Sherry; Robles, Rafaela R.; Kang, Sung-Yeon; Colon, Hector M.

2008-01-01

This study examines the influence of peer norms on sharing of injection paraphernalia (e.g., indirect sharing behaviors, including sharing of cookers, cotton, rinse water and back/front loading) among Puerto Rican injection drug users (IDUs) in Bayamon, Puerto Rico, and East Harlem, New York City. Data were collected from 873 Puerto Rican IDUs…

It's Good to Share: Why Environmental Scientists’ Ethics Are Out of Date

PubMed Central

Soranno, Patricia A.; Cheruvelil, Kendra S.; Elliott, Kevin C.; Montgomery, Georgina M.

2014-01-01

Although there have been many recent calls for increased data sharing, the majority of environmental scientists do not make their individual data sets publicly available in online repositories. Current data-sharing conversations are focused on overcoming the technological challenges associated with data sharing and the lack of rewards and incentives for individuals to share data. We argue that the most important conversation has yet to take place: There has not been a strong ethical impetus for sharing data within the current culture, behaviors, and practices of environmental scientists. In this article, we describe a critical shift that is happening in both society and the environmental science community that makes data sharing not just good but ethically obligatory. This is a shift toward the ethical value of promoting inclusivity within and beyond science. An essential element of a truly inclusionary and democratic approach to science is to share data through publicly accessible data sets. PMID:26955073

It's Good to Share: Why Environmental Scientists' Ethics Are Out of Date.

PubMed

Soranno, Patricia A; Cheruvelil, Kendra S; Elliott, Kevin C; Montgomery, Georgina M

2015-01-01

Although there have been many recent calls for increased data sharing, the majority of environmental scientists do not make their individual data sets publicly available in online repositories. Current data-sharing conversations are focused on overcoming the technological challenges associated with data sharing and the lack of rewards and incentives for individuals to share data. We argue that the most important conversation has yet to take place: There has not been a strong ethical impetus for sharing data within the current culture, behaviors, and practices of environmental scientists. In this article, we describe a critical shift that is happening in both society and the environmental science community that makes data sharing not just good but ethically obligatory. This is a shift toward the ethical value of promoting inclusivity within and beyond science. An essential element of a truly inclusionary and democratic approach to science is to share data through publicly accessible data sets.

Biomechanical and biological aspects of defect treatment in fractures using helical plates.

PubMed

Perren, S M; Regazzoni, P; Fernandez, A A D

2014-01-01

The clinical case of figure 1 through figure 11 shows a series of impressive failures of plate fixation. The plates were repeatedly applied bridging a comminuted bone segment in a heavy patient. The biomechanical analysis elaborates why this happened and proposes an unconventional procedure to prevent this failure with a minimally invasive procedure. A plate bridging an open gap or a defect in a long bone diaphysis is exposed to full functional load. According to clinical observations such plate application often fails even without external load such as weight bearing. The plate risks to break through fatigue when exposed during a long time to cyclic loading. This type of failure has been observed even with broad plates as well in femoral as in tibiae. The first option to avoid such failure consists in protecting the plate by installing load sharing between plate and either bone or an additional implant. This reduces the load carried by the plate to a safe level. Load sharing with bone may be installed at surgery by establishing solid mechanical bridge between the two main fragments of the fractured bone. The optimal load sharing relies on a solid compressed contact between the main fragments. It can be established because the bone is able to take a large load which results in optimal protection of the plate. In the case of an extended comminuted bone segment it may be very difficult, traumatizing and inefficient to reconstruct the bone. In the present case it was impossible to establish load sharing through the bone. The second option protecting the plate is provided by callus bridging of the gap or defect. The formation of a solid callus bridge takes time but the fatigue failure of the plate also takes time. Therefore, the callus bridge may prevent a late fatigue failure. The surgeon may select one of several options: - Replacing the lack of bone support using a second plate which immediately alleviates plate loading. The drawback of application of a second conventional plate is the extent of surgical trauma at the critical site of healing. - Shingling and/or applying an autologous cancellous bone graft: This procedure provides initially no relevant load sharing but will do so after a couple of weeks. The mechanical coupling of the comparably soft graft and the main fracture fragments presents little problems. Applying a cortical bone graft: Such a graft does provide initial only small load sharing and does a less good job inducing callus than a cancellous graft. Furthermore, the coupling by callus between a somewhat rigid bone graft and the mobile main fracture fragments requires a solid maintained contact. If the cortical graft is fixed using implants with small contact area to the graft such as screws or cerclage loops, the local stress may be critical and the graft may break. When the cortical graft is fixed with cerclage wires the procedure must take into account the limited strength of the individual cerclage. Therefore multiple and well-spaced cerclages are required and may lead to success especially if an intramedullary component of the implant contributes to protection (6). The degree of unloading depends apparently on the stiffness of the material of the protecting splint. Though, more important is the effect of the dimensions of the splint. While titanium as a material is about 50% less stiff than steel, the thickness of the implant changes the stiffness with the third power. That is doubling the thickness results in eightfold increased stiffness. When considering the unloading by application of a second plate the leverage of the second plate plays an important role. The larger the distance between the axis of bending and the second implant the larger the protecting effect. The helical plate (2, 3, 7) as introduced by A.A.D. Fernandez offers biological and mechanical advantages. It can be applied without touching the fracture site maintaining the critical biology intact and provides mechanically efficient unloading. Its application is fairly simple: The helical plate is modified conventional long and small plate that is twisted between its ends about 90 degrees. The twist is applied using "bending irons" (4, 5, 8) whereby the force required is small and the exact degree of twist is not critical. Therefore the twist is applicable operating bending irons by hand. Assuming a situation where a plate bridging a defect or non-union has failed the broken plate is replaced by a similar implant: At the distal end of the bone fracture and opposite to the surgical approach a small incision allows to slide in the helical plate in such a way that proximally the plate ends on the same side of the limb as the replaced plate. Ideally the two plate ends meet and the application of the helical plate does not ask for an additional surgical exposure at this location. Otherwise a small minimally invasive exposure is required. The helical plate is then fixed to the main bone fragments using a couple of locked screws. The following case demonstrates the use and efficiency of the helical plate saving a situation where multiple attempts using conventional plates had failed. The successful final treatment of this case was performed by A. A. D. Fernandez.

Load Sharing in Anti-Air Warfare Coordination: Criteria and a Simulation Test Plan

DTIC Science & Technology

1991-09-01

NAVAL POSTGRADUATE SCHOOL Monterey, California AD-A245 968 DTIG EB 18 199Z THESIS L LOAD SHARING IN ANTI-AIR WARFARE COORDINATION: CRITERIA AND A...REPORT NUMBER(S) Ga. NAME OF PERFORMING ORGANIZATION Gb. OFFICE SYMBOL 71. NAME OF MONITORING ORGANIZATION Naval Postgraduate School OR 6c. ADDRESS...the degree of MASTER OF SCIENCE IN OPERATIONS RESEARCH from the NAVAL POSTGRADUATE SCHOOL September 1991 Au thor: ’ysviL-’ / ; d Stephen Hue Keley

Analysis and performance of paralleling circuits for modular inverter-converter systems

NASA Technical Reports Server (NTRS)

Birchenough, A. G.; Gourash, F.

1972-01-01

As part of a modular inverter-converter development program, control techniques were developed to provide load sharing among paralleled inverters or converters. An analysis of the requirements of paralleling circuits and a discussion of the circuits developed and their performance are included in this report. The current sharing was within 5.6 percent of rated-load current for the ac modules and 7.4 percent for the dc modules for an initial output voltage unbalance of 5 volts.

Noise effects on the health status in a dynamic failure model for living organisms

NASA Astrophysics Data System (ADS)

Kang, H.; Jo, J.; Choi, M. Y.; Choi, J.; Yoon, B.-G.

2007-03-01

We study internal and external noise effects on the healthy-unhealthy transition and related phenomena in a dynamic failure model for living organisms. It is found that internal noise makes the system weaker, leading to breakdown under smaller stress. The discontinuous healthy-unhealthy transition in a system with global load sharing below a critical point is naturally explained in terms of the bistability for the health status. External noise present in constant stress gives similar results; further, it induces resonance in response to periodic stress, regardless of load transfer. In the case of local load sharing, such periodic stress is revealed more hazardous than the constant stress.

Does Education Lower Allostatic Load? A Co-twin Control Study

PubMed Central

Hamdi, Nayla R.; South, Susan C.; Krueger, Robert F.

2016-01-01

Many studies have found that education is associated with better health, but the causal basis of this association is unclear. The current study used a co-twin control design to examine if differences in years of education within twin pairs predict allostatic load. The strength of this design is that it controls for genetic and other familial confounds shared between twins. The sample consisted of 381 twins (with 292 twins from 146 complete pairs; mean age=57; 61% female) who participated in the biomarker project of the Midlife Development in the United States (MIDUS) study. Individual-level analyses showed a significant, negative association between years of education and allostatic load, but this association was explained entirely by familial influences shared between twins. The results of this study suggest that schooling does not itself protect against allostatic load. PMID:26778778

From Good to Great: Discussion Starter Tool

ERIC Educational Resources Information Center

Center on Great Teachers and Leaders, 2014

2014-01-01

In the report "From Good to Great: Exemplary Teachers Share Perspectives on Increasing Teacher Effectiveness across the Career Continuum," (See full report in ERIC at ED555657) National and State Teachers of the Year shared their views on what helped them become great teachers. This accompanying "Discussion Starter Tool" builds…

N-acetylaspartate and neurofilaments as biomarkers of axonal damage in patients with progressive forms of multiple sclerosis.

PubMed

Trentini, Alessandro; Comabella, Manuel; Tintoré, Mar; Koel-Simmelink, Marleen J A; Killestein, Joep; Roos, Birthe; Rovira, Alex; Korth, Carsten; Ottis, Philipp; Blankenstein, Marinus A; Montalban, Xavier; Bellini, Tiziana; Teunissen, Charlotte E

2014-12-01

Primary and secondary progressive forms of multiple sclerosis (PPMS and SPMS) have different pathological characteristics. However, it is unknown whether neurodegenerative mechanisms are shared. We measured cerebrospinal fluid (CSF) levels of neurofilament (Nf) light and heavy isoforms and N-acetylaspartic acid (NAA) in 21 PP, 10 SPMS patients and 15 non-inflammatory neurological disease controls (NINDC). Biomarkers were related to Expanded Disability Status Scale (EDSS) and Multiple Sclerosis Severity Score (MSSS) over a long period of follow-up [median (interquartile range) 9 (5.5-12.5) years] in 19 PPMS and 4 SPMS patients, and to T2 lesion load, T1 lesion load, and brain parenchymal fraction at the time of lumbar puncture. Nf light was higher in PPMS (p < 0.005) and Nf heavy was increased in both SPMS and PPMS (p < 0.05 and p < 0.01) compared to NINDC, but were comparable between the two MS subtypes. Nf heavy was a predictor of the ongoing disability measured by MSSS (R(2) = 0.17, β = 0.413; p < 0.05). Conversely, Nf light was the only predictor of the EDSS annual increase (R(2) = 0.195, β = 0.441; p < 0.05). The frequency of abnormal biomarkers did not differ between the two MS progressive subtypes. Our data suggest that PP and SPMS likely share similar mechanisms of axonal damage. Moreover, Nf heavy can be a biomarker of ongoing axonal damage. Conversely, Nf light can be used as a prognostic marker for accumulating disability suggesting it as a good tool for possible treatment monitoring in the progressive MS forms.

Grip force and force sharing in two different manipulation tasks with bottles.

PubMed

Cepriá-Bernal, Javier; Pérez-González, Antonio; Mora, Marta C; Sancho-Bru, Joaquín L

2017-07-01

Grip force and force sharing during two activities of daily living were analysed experimentally in 10 right-handed subjects. Four different bottles, filled to two different levels, were manipulated for two tasks: transporting and pouring. Each test subject's hand was instrumented with eight thin wearable force sensors. The grip force and force sharing were significantly different for each bottle model. Increasing the filling level resulted in an increase in grip force, but the ratio of grip force to load force was higher for lighter loads. The task influenced the force sharing but not the mean grip force. The contributions of the thumb and ring finger were higher in the pouring task, whereas the contributions of the palm and the index finger were higher in the transport task. Mean force sharing among fingers was 30% for index, 29% for middle, 22% for ring and 19% for little finger. Practitioner Summary: We analysed grip force and force sharing in two manipulation tasks with bottles: transporting and pouring. The objective was to understand the effects of the bottle features, filling level and task on the contribution of different areas of the hand to the grip force. Force sharing was different for each task and the bottles features affected to both grip force and force sharing.

Planetary Load Sharing in Three-Point- Mounted Wind Turbine Gearboxes: Preprint

DOE Office of Scientific and Technical Information (OSTI.GOV)

Guo, Yi; Keller, Jonathan A

Wind turbine gearboxes do not achieve their expected design life. The cost of gearbox replacements and rebuilds and the downtime associated with these failures increase the cost of wind energy. In 2007, the U.S. Department of Energy established the National Renewable Energy Laboratory (NREL) Gearbox Reliability Collaborative (GRC). Its goals are to understand the root causes of premature gearbox failures and improve their reliability. To date, the GRC has focused on a 750-kW drivetrain with a three-stage, three-point-mounted gearbox. A nonproprietary version of the gearbox containing CRBs with C3 clearances in the planetary stage was customized. Two of these gearboxes,more » GB1 and GB2, were manufactured and then tested in the National Wind Technology Center's 2.5-MW dynamometer and in the field. Major GRC findings include the detrimental effect of rotor moments on planetary load sharing and predicted fatigue, and the risk of bearing sliding in low-torque conditions for three-point configuration drivetrains. Based on the knowledge gained from testing and analysis of the original design, the GRC gearbox was redesigned to improve its load-sharing characteristics and predicted fatigue. This new gearbox is named GB3. As shown in Figure 1, its key improvement is the incorporation of preloaded TRBs that support the planet carrier and planets. Roller loads can be optimized and bearing life maximized with a small preload [4]. These preloaded bearings, along with interference-fitted planet pins, improve alignments and load-sharing characteristics. A semi-integrated planet bearing design also increases capacity and eliminates outer race fretting. Romax Technology, with Powertrain Engineers and the Timken Company (Timken), completed the redesign. Timken manufactured and instrumented the planet gears and bearings. Brad Foote Gearing manufactured the other gearing and assembled the gearbox.« less

Clinical Trial Data as Public Goods: Fair Trade and the Virtual Knowledge Bank as a Solution to the Free Rider Problem - A Framework for the Promotion of Innovation by Facilitation of Clinical Trial Data Sharing among Biopharmaceutical Companies in the Era of Omics and Big Data.

PubMed

Evangelatos, Nikolaos; Reumann, Matthias; Lehrach, Hans; Brand, Angela

2016-01-01

Knowledge in the era of Omics and Big Data has been increasingly conceptualized as a public good. Sharing of de-identified patient data has been advocated as a means to increase confidence and public trust in the results of clinical trials. On the other hand, research has shown that the current research and development model of the biopharmaceutical industry has reached its innovation capacity. In response to that, the biopharmaceutical industry has adopted open innovation practices, with sharing of clinical trial data being among the most interesting ones. However, due to the free rider problem, clinical trial data sharing among biopharmaceutical companies could undermine their innovativeness. Based on the theory of public goods, we have developed a commons arrangement and devised a model, which enables secure and fair clinical trial data sharing over a Virtual Knowledge Bank based on a web platform. Our model uses data as a virtual currency and treats knowledge as a club good. Fair sharing of clinical trial data over the Virtual Knowledge Bank has positive effects on the innovation capacity of the biopharmaceutical industry without compromising the intellectual rights, proprietary interests and competitiveness of the latter. The Virtual Knowledge Bank is a sustainable and self-expanding model for secure and fair clinical trial data sharing that allows for sharing of clinical trial data, while at the same time it increases the innovation capacity of the biopharmaceutical industry. © 2016 S. Karger AG, Basel.

A Young Adult Diet for Adults: Bring on the Good Stuff!

ERIC Educational Resources Information Center

Follos, Alison

2004-01-01

"Title Trekking program" is a young adult reading program that encourages students to read books from a carefully selected reading list and reflect about them in a journal. The program's momentum comes from personal communication and encouragement, which includes staff sharing good books with their students, sharing them with each other, and…

Student and Teacher Attendance: The Role of Shared Goods in Reducing Absenteeism

ERIC Educational Resources Information Center

Banerjee, Ritwik; King, Elizabeth M.; Orazem, Peter F.; Paterno, Elizabeth M.

2012-01-01

A theoretical model is advanced that demonstrates that, if teacher and student attendance generate a shared good, then teacher and student attendance will be mutually reinforcing. Using data from the Northwest Frontier Province of Pakistan, empirical evidence supporting that proposition is advanced. Controlling for the endogeneity of teacher and…

Product Bundling and Shared Information Goods: A Pricing Exercise

ERIC Educational Resources Information Center

Morrison, William G.

2016-01-01

In this article, the author describes an exercise in which two pricing problems (product bundling and the sharing of digital information goods) can be understood using the same analytical approach. The exercise allows students to calculate the correct numerical answers with relative ease, while the teaching plan demonstrates the importance of the…

Time-dependent fiber bundles with local load sharing.

PubMed

Newman, W I; Phoenix, S L

2001-02-01

Fiber bundle models, where fibers have random lifetimes depending on their load histories, are useful tools in explaining time-dependent failure in heterogeneous materials. Such models shed light on diverse phenomena such as fatigue in structural materials and earthquakes in geophysical settings. Various asymptotic and approximate theories have been developed for bundles with various geometries and fiber load-sharing mechanisms, but numerical verification has been hampered by severe computational demands in larger bundles. To gain insight at large size scales, interest has returned to idealized fiber bundle models in 1D. Such simplified models typically assume either equal load sharing (ELS) among survivors, or local load sharing (LLS) where a failed fiber redistributes its load onto its two nearest flanking survivors. Such models can often be solved exactly or asymptotically in increasing bundle size, N, yet still capture the essence of failure in real materials. The present work focuses on 1D bundles under LLS. As in previous works, a fiber has failure rate following a power law in its load level with breakdown exponent rho. Surviving fibers under fixed loads have remaining lifetimes that are independent and exponentially distributed. We develop both new asymptotic theories and new computational algorithms that greatly increase the bundle sizes that can be treated in large replications (e.g., one million fibers in thousands of realizations). In particular we develop an algorithm that adapts several concepts and methods that are well-known among computer scientists, but relatively unknown among physicists, to dramatically increase the computational speed with no attendant loss of accuracy. We consider various regimes of rho that yield drastically different behavior as N increases. For 1/2< or =rho< or =1, ELS and LLS have remarkably similar behavior (they have identical lifetime distributions at rho=1) with approximate Gaussian bundle lifetime statistics and a finite limiting mean. For rho>1 this Gaussian behavior also applies to ELS, whereas LLS behavior diverges sharply showing brittle, weakest volume behavior in terms of characteristic elements derived from critical cluster formation. For 0

Influence of inclination angles on intra- and inter-limb load-sharing during uphill walking.

PubMed

Hong, Shih-Wun; Leu, Tsai-Hsueh; Li, Jia-Da; Wang, Ting-Ming; Ho, Wei-Ping; Lu, Tung-Wu

2014-01-01

Uphill walking is an inevitable part of daily living, placing more challenges on the locomotor system with greater risk of falls than level walking does. The current study aimed to investigate the effects of inclination angles on the inter-joint and inter-limb load-sharing during uphill walking in terms of total support moment and contributions of individual joint moments to the total support moment. Fifteen young adults walked up walkways with 0°, 5°, 10° and 15° of slope while kinematic and kinetic data were collected and analyzed. With increasing inclination angles, the first peak of the total support moment was increased with unaltered individual joint contributions, suggesting an unaltered inter-joint control pattern in the leading limb to meet the increased demands. The second peak of the total support moment remained unchanged with increasing inclination angles primarily through a compensatory redistribution of the hip and knee moments. During DLS, the leading limb shared the majority of the whole body support moments. The current results reveal basic intra- and inter-limb load-sharing patterns of uphill walking, which will be helpful for a better understanding of the control strategies adopted and for subsequent clinical applications. Copyright © 2013 Elsevier B.V. All rights reserved.

Inattentional Deafness: Visual Load Leads to Time-Specific Suppression of Auditory Evoked Responses

PubMed Central

Molloy, Katharine; Griffiths, Timothy D.; Lavie, Nilli

2015-01-01

Due to capacity limits on perception, conditions of high perceptual load lead to reduced processing of unattended stimuli (Lavie et al., 2014). Accumulating work demonstrates the effects of visual perceptual load on visual cortex responses, but the effects on auditory processing remain poorly understood. Here we establish the neural mechanisms underlying “inattentional deafness”—the failure to perceive auditory stimuli under high visual perceptual load. Participants performed a visual search task of low (target dissimilar to nontarget items) or high (target similar to nontarget items) load. On a random subset (50%) of trials, irrelevant tones were presented concurrently with the visual stimuli. Brain activity was recorded with magnetoencephalography, and time-locked responses to the visual search array and to the incidental presence of unattended tones were assessed. High, compared to low, perceptual load led to increased early visual evoked responses (within 100 ms from onset). This was accompanied by reduced early (∼100 ms from tone onset) auditory evoked activity in superior temporal sulcus and posterior middle temporal gyrus. A later suppression of the P3 “awareness” response to the tones was also observed under high load. A behavioral experiment revealed reduced tone detection sensitivity under high visual load, indicating that the reduction in neural responses was indeed associated with reduced awareness of the sounds. These findings support a neural account of shared audiovisual resources, which, when depleted under load, leads to failures of sensory perception and awareness. SIGNIFICANCE STATEMENT The present work clarifies the neural underpinning of inattentional deafness under high visual load. The findings of near-simultaneous load effects on both visual and auditory evoked responses suggest shared audiovisual processing capacity. Temporary depletion of shared capacity in perceptually demanding visual tasks leads to a momentary reduction in sensory processing of auditory stimuli, resulting in inattentional deafness. The dynamic “push–pull” pattern of load effects on visual and auditory processing furthers our understanding of both the neural mechanisms of attention and of cross-modal effects across visual and auditory processing. These results also offer an explanation for many previous failures to find cross-modal effects in experiments where the visual load effects may not have coincided directly with auditory sensory processing. PMID:26658858

78 FR 18451 - Education and Sharing Day, U.S.A., 2013

Federal Register 2010, 2011, 2012, 2013, 2014

2013-03-26

... must we pass on the common values that help define us as a people. On Education and Sharing Day, U.S.A... our youth. We know education is essential to putting our children on the path to good jobs and a... men and women the importance of education and good character. His work strengthened ties between...

But for the Bad, There Would Not Be Good: Grounding Valence in Brightness through Shared Relational Structures

ERIC Educational Resources Information Center

Lakens, Daniel; Semin, Gun R.; Foroni, Francesco

2012-01-01

Light and dark are used pervasively to represent positive and negative concepts. Recent studies suggest that black and white stimuli are automatically associated with negativity and positivity. However, structural factors in experimental designs, such as the shared opposition in the valence (good vs. bad) and brightness (light vs. dark) dimensions…

An architecture for real-time vision processing

NASA Technical Reports Server (NTRS)

Chien, Chiun-Hong

1994-01-01

To study the feasibility of developing an architecture for real time vision processing, a task queue server and parallel algorithms for two vision operations were designed and implemented on an i860-based Mercury Computing System 860VS array processor. The proposed architecture treats each vision function as a task or set of tasks which may be recursively divided into subtasks and processed by multiple processors coordinated by a task queue server accessible by all processors. Each idle processor subsequently fetches a task and associated data from the task queue server for processing and posts the result to shared memory for later use. Load balancing can be carried out within the processing system without the requirement for a centralized controller. The author concludes that real time vision processing cannot be achieved without both sequential and parallel vision algorithms and a good parallel vision architecture.

Should pathological gambling and obesity be considered addictive disorders? A factor analytic study in a nationally representative sample

PubMed Central

Blanco, Carlos; García-Anaya, María; Wall, Melanie; de los Cobos, José Carlos Pérez; Swierad, Ewelina; Wang, Shuai; Petry, Nancy M.

2015-01-01

Objective Pathological gambling (PG) is now aligned with substance use disorders in the DSM-5 as the first officially recognized behavioral addiction. There is growing interest in examining obesity as an addictive disorder as well. The goal of this study was to investigate whether epidemiological data provide support for the consideration of PG and obesity as addictive disorders. Method Factor analysis of data from a large, nationally representative sample of US adults (N=43,093), using nicotine dependence, alcohol dependence, drug dependence, PG and obesity as indicators. It was hypothesized that nicotine dependence, alcohol dependence and drug use dependence would load on a single factor. It was further hypothesized that if PG and obesity were addictive disorders, they would load on the same factor as substance use disorders, whereas failure to load on the addictive factor would not support their conceptualization as addictive disorders. Results A model with one factor including nicotine dependence, alcohol dependence, drug dependence and PG, but not obesity, provided a very good fit to the data, as indicated by CFI=0.99, TLI=0.99 and RMSEA=.01 and loadings of all indicators >0.4. Conclusion Data from this study support the inclusion of PG in a latent factor with substance use disorders but do not lend support to the consideration of obesity, as defined by BMI, as an addictive disorder. Future research should investigate whether certain subtypes of obesity are best conceptualized as addictive disorders and the shared biological and environmental factors that account for the common and specific features of addictive disorders. PMID:25769392

On Asymptotically Good Ramp Secret Sharing Schemes

NASA Astrophysics Data System (ADS)

Geil, Olav; Martin, Stefano; Martínez-Peñas, Umberto; Matsumoto, Ryutaroh; Ruano, Diego

Asymptotically good sequences of linear ramp secret sharing schemes have been intensively studied by Cramer et al. in terms of sequences of pairs of nested algebraic geometric codes. In those works the focus is on full privacy and full reconstruction. In this paper we analyze additional parameters describing the asymptotic behavior of partial information leakage and possibly also partial reconstruction giving a more complete picture of the access structure for sequences of linear ramp secret sharing schemes. Our study involves a detailed treatment of the (relative) generalized Hamming weights of the considered codes.

Analysis of DMFC/battery hybrid power system for portable applications

NASA Astrophysics Data System (ADS)

Lee, Bong-Do; Jung, Doo-Hwan; Ko, Young-Ho

This study was carried out to develop a direct methanol fuel cell (DMFC)/battery hybrid power system used in portable applications. For a portable power system, the DMFC was applied for the main power source at average load and the battery was applied for auxiliary power at overload. Load share characteristics of hybrid power source were analyzed by computational simulation. The connection apparatus between the DMFC and the battery was set and investigated in the real system. Voltages and currents of the load, the battery and the DMFC were measured according to fuel, air and load changes. The relationship between load share characteristic and battery capacity was surveyed. The relationship was also studied in abnormal operation. A DMFC stack was manufactured for this experiment. For the study of the connection characteristics to the fuel cell Pb-acid, Ni-Cd and Ni-MH batteries were tested. The results of this study can be applied to design the interface module of the fuel cell/battery hybrid system and to determine the design requirement in the fuel cell stack for portable applications.

19 CFR 10.552 - Information sharing by CBP regarding textile and apparel goods produced in the United States.

Code of Federal Regulations, 2013 CFR

2013-04-01

... 19 Customs Duties 1 2013-04-01 2013-04-01 false Information sharing by CBP regarding textile and apparel goods produced in the United States. 10.552 Section 10.552 Customs Duties U.S. CUSTOMS AND BORDER... Government of Singapore containing a brief statement of the matter at issue and the cooperation requested...

19 CFR 10.552 - Information sharing by CBP regarding textile and apparel goods produced in the United States.

Code of Federal Regulations, 2014 CFR

2014-04-01

... 19 Customs Duties 1 2014-04-01 2014-04-01 false Information sharing by CBP regarding textile and apparel goods produced in the United States. 10.552 Section 10.552 Customs Duties U.S. CUSTOMS AND BORDER... Government of Singapore containing a brief statement of the matter at issue and the cooperation requested...

19 CFR 10.552 - Information sharing by CBP regarding textile and apparel goods produced in the United States.

Code of Federal Regulations, 2010 CFR

2010-04-01

... 19 Customs Duties 1 2010-04-01 2010-04-01 false Information sharing by CBP regarding textile and apparel goods produced in the United States. 10.552 Section 10.552 Customs Duties U.S. CUSTOMS AND BORDER... Government of Singapore containing a brief statement of the matter at issue and the cooperation requested...

19 CFR 10.552 - Information sharing by CBP regarding textile and apparel goods produced in the United States.

Code of Federal Regulations, 2011 CFR

2011-04-01

... 19 Customs Duties 1 2011-04-01 2011-04-01 false Information sharing by CBP regarding textile and apparel goods produced in the United States. 10.552 Section 10.552 Customs Duties U.S. CUSTOMS AND BORDER... Government of Singapore containing a brief statement of the matter at issue and the cooperation requested...

19 CFR 10.552 - Information sharing by CBP regarding textile and apparel goods produced in the United States.

Code of Federal Regulations, 2012 CFR

2012-04-01

... 19 Customs Duties 1 2012-04-01 2012-04-01 false Information sharing by CBP regarding textile and apparel goods produced in the United States. 10.552 Section 10.552 Customs Duties U.S. CUSTOMS AND BORDER... Government of Singapore containing a brief statement of the matter at issue and the cooperation requested...

Money, Food, and Daily Life Objects Are Similarly Shared in the Dictator Game. A Study among Poles and Tsimane'.

PubMed

Sorokowski, Piotr; Oleszkiewicz, Anna; Niemczyk, Agnieszka; Marczak, Michalina; Huanca, Tomas; Velasco, Esther C; Sorokowska, Agnieszka

2017-01-01

The dictator game (DG) is one of the most popular methods for measuring sharing behaviors. However, the matter of goods used in the game has rarely been examined and discussed. We conducted a study in which all participants played standard version of DG in one of the three versions - "money," "food," or "daily life objects" sharing. Further, we wanted to expand the generalizability of our findings by investigating whether patterns in sharing various goods are independent of culture and the level of market integration. Thus, the study was conducted among people who function daily under the conditions of low market integration (109 Tsimane' - forager-horticulturists from Bolivian Amazon) and in a society highly integrated with the market-based economy (85 Polish people). We observed that among both Polish and Tsimane' people the participants were equally likely to share money, food and small, daily life objects with an unknown partner, which implies that generosity might not be related with the type of possessed resources. However, regardless of the kind of goods given, Tsimane' people were less eager to share with anonymous others than Polish people. We present several implications of our findings for studies on generosity and altruism.

Domain-general involvement of the posterior frontolateral cortex in time-based resource-sharing in working memory: An fMRI study.

PubMed

Vergauwe, Evie; Hartstra, Egbert; Barrouillet, Pierre; Brass, Marcel

2015-07-15

Working memory is often defined in cognitive psychology as a system devoted to the simultaneous processing and maintenance of information. In line with the time-based resource-sharing model of working memory (TBRS; Barrouillet and Camos, 2015; Barrouillet et al., 2004), there is accumulating evidence that, when memory items have to be maintained while performing a concurrent activity, memory performance depends on the cognitive load of this activity, independently of the domain involved. The present study used fMRI to identify regions in the brain that are sensitive to variations in cognitive load in a domain-general way. More precisely, we aimed at identifying brain areas that activate during maintenance of memory items as a direct function of the cognitive load induced by both verbal and spatial concurrent tasks. Results show that the right IFJ and bilateral SPL/IPS are the only areas showing an increased involvement as cognitive load increases and do so in a domain general manner. When correlating the fMRI signal with the approximated cognitive load as defined by the TBRS model, it was shown that the main focus of the cognitive load-related activation is located in the right IFJ. The present findings indicate that the IFJ makes domain-general contributions to time-based resource-sharing in working memory and allowed us to generate the novel hypothesis by which the IFJ might be the neural basis for the process of rapid switching. We argue that the IFJ might be a crucial part of a central attentional bottleneck in the brain because of its inability to upload more than one task rule at once. Copyright © 2015 Elsevier Inc. All rights reserved.

Characterizing the load environment of ferry landings for Washington State ferries and the Alaska Marine Highway System.

DOT National Transportation Integrated Search

2013-05-01

Anybody riding a ferry wants it to dock safely and for port managers, having passengers and : goods in the water is never a good thing. This project aims to mitigate uncertainty and : assumptions about load demands on ferry terminal structures, s...

Characterizing the load environment of ferry landings for Washington State ferries and the Alaska Marine Highway System.

DOT National Transportation Integrated Search

2012-05-01

Anybody riding a ferry wants it to dock safely and for port managers, having passengers and goods in the water is never a good thing. This project aims to mitigate : uncertainty and assumptions about load demands on ferry terminal structures, spe...

An Optimized Control for LLC Resonant Converter with Wide Load Range

NASA Astrophysics Data System (ADS)

Xi, Xia; Qian, Qinsong

2017-05-01

This paper presents an optimized control which makes LLC resonant converters operate with a wider load range and provides good closed-loop performance. The proposed control employs two paralleled digital compensations to guarantee the good closed-loop performance in a wide load range during the steady state, an optimized trajectory control will take over to change the gate-driving signals immediately at the load transients. Finally, the proposed control has been implemented and tested on a 150W 200kHz 400V/24V LLC resonant converter and the result validates the proposed method.

Using squat repetition maximum testing to determine hamstring resistance training exercise loads.

PubMed

Ebben, William P; Long, Nicholas J; Pawlowski, Zach D; Chmielewski, Lauren M; Clewien, Rustin W; Jensen, Randall L

2010-02-01

The purpose of this study was to determine whether there is a linear relationship between the squat and a variety of hamstring resistance training exercises, and whether this relationship differs on the basis of sex. This study also sought to create prediction equations for the determination of hamstring exercise load based on the squat load. Repetition maximums of the squat, as well as 4 common hamstring resistance training exercises including the seated leg curl, stiff leg dead lift, single leg dead lift, and good morning exercise, were determined for each subject. Subjects included 21 men and 13 women collegiate athletes. Data were evaluated using linear regression analysis to predict hamstring exercise loads from 6 repetition maximum squat data. Results of the analysis of all subjects indicated that squat load was a significant predictor of loads for each of the hamstring exercises. However, separate analysis of women revealed that squat load was not a significant predictor of loads for any of the hamstring exercises. Analysis of the men revealed that squat was a significant predictor of load for the seated leg curl (R = 0.58, p < 0.001), stiff leg dead lift (R = 0.82, p < 0.001), single leg stiff leg dead lift (R = 0.80, p < 0.001), and good morning (R = 0.79, p < 0.001) exercises. On the basis of the analysis of the men, the following prediction equations were devised for each exercise: (1) seated leg curl load = squat load (0.186) + 10.935 kg, (2) stiff leg deadlift load = squat load (1.133) - 86.331 kg, (3) single leg stiff leg deadlift load = squat load (0.443) - 3.425 kg, and (4) good morning load = squat load (0.961) - 105.505 kg. Thus, results from testing core exercises such as the squat can provide useful data for the assignment of loads for assistance exercises.

Detecting local haplotype sharing and haplotype association

USDA-ARS?s Scientific Manuscript database

A novel haplotype association method is presented, and its power is demonstrated. Relying on a statistical model for linkage disequilibrium (LD), the method first infers ancestral haplotypes and their loadings at each marker for each individual. The loadings are then used to quantify local haplotype...

Automatic load sharing in inverter modules

NASA Technical Reports Server (NTRS)

Nagano, S.

1979-01-01

Active feedback loads transistor equally with little power loss. Circuit is suitable for balancing modular inverters in spacecraft, computer power supplies, solar-electric power generators, and electric vehicles. Current-balancing circuit senses differences between collector current for power transistor and average value of load currents for all power transistors. Principle is effective not only in fixed duty-cycle inverters but also in converters operating at variable duty cycles.

Assessing Knowledge Sharing Among Academics: A Validation of the Knowledge Sharing Behavior Scale (KSBS).

PubMed

Ramayah, T; Yeap, Jasmine A L; Ignatius, Joshua

2014-04-01

There is a belief that academics tend to hold on tightly to their knowledge and intellectual resources. However, not much effort has been put into the creation of a valid and reliable instrument to measure knowledge sharing behavior among the academics. To apply and validate the Knowledge Sharing Behavior Scale (KSBS) as a measure of knowledge sharing behavior within the academic community. Respondents (N = 447) were academics from arts and science streams in 10 local, public universities in Malaysia. Data were collected using the 28-item KSBS that assessed four dimensions of knowledge sharing behavior namely written contributions, organizational communications, personal interactions, and communities of practice. The exploratory factor analysis showed that the items loaded on the dimension constructs that they were supposed to represent, thus proving construct validity. A within-factor analysis revealed that each set of items representing their intended dimension loaded on only one construct, therefore establishing convergent validity. All four dimensions were not perfectly correlated with each other or organizational citizenship behavior, thereby proving discriminant validity. However, all four dimensions correlated with organizational commitment, thus confirming predictive validity. Furthermore, all four factors correlated with both tacit and explicit sharing, which confirmed their concurrent validity. All measures also possessed sufficient reliability (α > .70). The KSBS is a valid and reliable instrument that can be used to formally assess the types of knowledge artifacts residing among academics and the degree of knowledge sharing in relation to those artifacts. © The Author(s) 2014.

Why shared decision making is not good enough: lessons from patients.

PubMed

Olthuis, Gert; Leget, Carlo; Grypdonck, Mieke

2014-07-01

A closer look at the lived illness experiences of medical professionals themselves shows that shared decision making is in need of a logic of care. This paper underlines that medical decision making inevitably takes place in a messy and uncertain context in which sharing responsibilities may impose a considerable burden on patients. A better understanding of patients' lived experiences enables healthcare professionals to attune to what individual patients deem important in their lives.This will contribute to making medical decisions in a good and caring manner, taking into account the lived experience of being ill.

Shared Secrets versus Secrets Kept Private Are Linked to Better Adolescent Adjustment

ERIC Educational Resources Information Center

Frijns, Tom; Finkenauer, Catrin; Keijsers, Loes

2013-01-01

It is a household notion that secrecy is bad while sharing is good. But what about shared secrets? The present research adopts a functional analysis of sharing secrets, arguing that it should negate harmful consequences generally associated with secrecy and serves important interpersonal functions in adolescence. A survey study among 790 Dutch…

Planetary gear profile modification design based on load sharing modelling

NASA Astrophysics Data System (ADS)

Iglesias, Miguel; Fernández Del Rincón, Alfonso; De-Juan, Ana Magdalena; Garcia, Pablo; Diez, Alberto; Viadero, Fernando

2015-07-01

In order to satisfy the increasing demand on high performance planetary transmissions, an important line of research is focused on the understanding of some of the underlying phenomena involved in this mechanical system. Through the development of models capable of reproduce the system behavior, research in this area contributes to improve gear transmission insight, helping developing better maintenance practices and more efficient design processes. A planetary gear model used for the design of profile modifications ratio based on the levelling of the load sharing ratio is presented. The gear profile geometry definition, following a vectorial approach that mimics the real cutting process of gears, is thoroughly described. Teeth undercutting and hypotrochoid definition are implicitly considered, and a procedure for the incorporation of a rounding arc at the tooth tip in order to deal with corner contacts is described. A procedure for the modeling of profile deviations is presented, which can be used for the introduction of both manufacturing errors and designed profile modifications. An easy and flexible implementation of the profile deviation within the planetary model is accomplished based on the geometric overlapping. The contact force calculation and dynamic implementation used in the model are also introduced, and parameters from a real transmission for agricultural applications are presented for the application example. A set of reliefs is designed based on the levelling of the load sharing ratio for the example transmission, and finally some other important dynamic factors of the transmission are analyzed to assess the changes in the dynamic behavior with respect to the non-modified case. Thus, the main innovative aspect of the proposed planetary transmission model is the capacity of providing a simulated load sharing ratio which serves as design variable for the calculation of the tooth profile modifications.

Queuing theory models used for port equipment sizing

NASA Astrophysics Data System (ADS)

Dragu, V.; Dinu, O.; Ruscă, A.; Burciu, Ş.; Roman, E. A.

2017-08-01

The significant growth of volumes and distances on road transportation led to the necessity of finding solutions to increase water transportation market share together with the handling and transfer technologies within its terminals. It is widely known that the biggest times are consumed within the transport terminals (loading/unloading/transfer) and so the necessity of constantly developing handling techniques and technologies in concordance with the goods flows size so that the total waiting time of ships within ports is reduced. Port development should be achieved by harmonizing the contradictory interests of port administration and users. Port administrators aim profit increase opposite to users that want savings by increasing consumers’ surplus. The difficulty consists in the fact that the transport demand - supply equilibrium must be realised at costs and goods quantities transiting the port in order to satisfy the interests of both parties involved. This paper presents a port equipment sizing model by using queueing theory so that the sum of costs for ships waiting operations and equipment usage would be minimum. Ship operation within the port is assimilated to a mass service waiting system in which parameters are later used to determine the main costs for ships and port equipment.

SAHAYOG: A Testbed for Load Sharing under Failure,

DTIC Science & Technology

1987-07-01

messages, shared memory and semaphores . To communicate using messages, processes create message queues using system-provided prim- itives. The message...The size of the memory that is to be shared is decided by the process when it makes a request for memory allocation. The semaphore option of IPC can be...used to prevent two or more concurrent processes from executing their critical sections at the same time. Semaphores must be used when the processes

Time and Cognitive Load in Working Memory

ERIC Educational Resources Information Center

Barrouillet, Pierre; Bernardin, Sophie; Portrat, Sophie; Vergauwe, Evie; Camos, Valerie

2007-01-01

According to the time-based resource-sharing model (P. Barrouillet, S. Bernardin, & V. Camos, 2004), the cognitive load a given task involves is a function of the proportion of time during which it captures attention, thus impeding other attention-demanding processes. Accordingly, the present study demonstrates that the disruptive effect on…

Tax decisions bring good and bad news for hospitals.

PubMed

Bromberg, R S

1980-12-01

Three recent court decisions denying tax exemptions to shared hospital laundry service organizations should dispel the belief that tax exemptions will automatically be granted to shared service organizations. Two other decisions on the sale of goods and services to persons other than hospitals suggest that the IRS is moving toward a position that accepts certain services as indigenous to the exempt functions of a modern community hospital.

Taking Attention Away from the Auditory Modality: Context-dependent Effects on Early Sensory Encoding of Speech.

PubMed

Xie, Zilong; Reetzke, Rachel; Chandrasekaran, Bharath

2018-05-24

Increasing visual perceptual load can reduce pre-attentive auditory cortical activity to sounds, a reflection of the limited and shared attentional resources for sensory processing across modalities. Here, we demonstrate that modulating visual perceptual load can impact the early sensory encoding of speech sounds, and that the impact of visual load is highly dependent on the predictability of the incoming speech stream. Participants (n = 20, 9 females) performed a visual search task of high (target similar to distractors) and low (target dissimilar to distractors) perceptual load, while early auditory electrophysiological responses were recorded to native speech sounds. Speech sounds were presented either in a 'repetitive context', or a less predictable 'variable context'. Independent of auditory stimulus context, pre-attentive auditory cortical activity was reduced during high visual load, relative to low visual load. We applied a data-driven machine learning approach to decode speech sounds from the early auditory electrophysiological responses. Decoding performance was found to be poorer under conditions of high (relative to low) visual load, when the incoming acoustic stream was predictable. When the auditory stimulus context was less predictable, decoding performance was substantially greater for the high (relative to low) visual load conditions. Our results provide support for shared attentional resources between visual and auditory modalities that substantially influence the early sensory encoding of speech signals in a context-dependent manner. Copyright © 2018 IBRO. Published by Elsevier Ltd. All rights reserved.

Tools to share good chairside teaching practice: a clinical scenario and appreciative questionnaire.

PubMed

Sweet, J; Wilson, J; Pugsley, L; Schofield, M

2008-12-13

This article provides a scenario for analysis of good chairside teaching practice to serve as a starting point for continued discussion in this complex field. Documented issues of good chairside teaching practice are cross-referenced to a clinical scenario with explanations in the form of a commentary. This provided the context for generating a set of questions that are provided as tools to support good chairside practice. These tools are designed to be used with 'Appreciative Inquiry', which claims that there is much to be gained by discovering where excellence is possible and elaborating upon this. Although this process can be carried out in single units or departments, it is proposed that collaboration between institutions would allow sharing of valuable innovations and greater understanding of educational training, production of good practice guidance and professional development of staff. This article is the third in a series of three and provides a scaffold for a scenario and questions to encourage collaboration in evolving and sharing good chairside teaching practice. The first article investigated the perceptions of stakeholders in chairside teaching at a single dental school and the second evaluated chairside teaching on a UK wide scale. A further accompanying article reviews some of the educational methodology and innovations in teaching and learning that may be applied to dentistry.

Should pathological gambling and obesity be considered addictive disorders? A factor analytic study in a nationally representative sample.

PubMed

Blanco, Carlos; García-Anaya, María; Wall, Melanie; de Los Cobos, José Carlos Pérez; Swierad, Ewelina; Wang, Shuai; Petry, Nancy M

2015-05-01

Pathological gambling (PG) is now aligned with substance use disorders in the DSM-5 as the first officially recognized behavioral addiction. There is growing interest in examining obesity as an addictive disorder as well. The goal of this study was to investigate whether epidemiological data provide support for the consideration of PG and obesity as addictive disorders. Factor analysis of data from a large, nationally representative sample of US adults (N=43,093), using nicotine dependence, alcohol dependence, drug dependence, PG and obesity as indicators. It was hypothesized that nicotine dependence, alcohol dependence and drug use dependence would load on a single factor. It was further hypothesized that if PG and obesity were addictive disorders, they would load on the same factor as substance use disorders, whereas failure to load on the addictive factor would not support their conceptualization as addictive disorders. A model with one factor including nicotine dependence, alcohol dependence, drug dependence and PG, but not obesity, provided a very good fit to the data, as indicated by CFI=0.99, TLI=0.99 and RMSEA=0.01 and loadings of all indicators >0.4. Data from this study support the inclusion of PG in a latent factor with substance use disorders but do not lend support to the consideration of obesity, as defined by BMI, as an addictive disorder. Future research should investigate whether certain subtypes of obesity are best conceptualized as addictive disorders and the shared biological and environmental factors that account for the common and specific features of addictive disorders. Copyright © 2015 Elsevier Ireland Ltd. All rights reserved.

Prediction of contact path and load sharing in spiral bevel gears

NASA Technical Reports Server (NTRS)

Bibel, George D.; Tiku, Karuna; Kumar, Ashok

1994-01-01

A procedure is presented to perform a contact analysis of spiral bevel gears in order to predict the contact path and the load sharing as the gears roll through mesh. The approach utilizes recent advances in automated contact methods for nonlinear finite element analysis. A sector of the pinion and gear is modeled consisting of three pinion teeth and four gear teeth in mesh. Calculation of the contact force and stresses through the gear meshing cycle are demonstrated. Summary of the results are presented using three dimensional plots and tables. Issues relating to solution convergence and requirements for running large finite element analysis on a supercomputer are discussed.

Vent modification of large ribbon parachutes to enhance cluster performance

NASA Technical Reports Server (NTRS)

Kolega, D. J.; Woodis, W. R.; Reuter, J. D.

1986-01-01

Due to uneven load sharing and lagging inflation rates, the design of the Large Main Parachute (LMP) cluster, used to recover the Space Shuttle steel case Solid Rocket Boosters, had to be modified. The cause of the problem was excessive variation in effective porosity in the crown area of the LMP during first stage inflation. The design modification consisted of adding horizontal ribbons above the existing vent band to reduce the vent porosity and better control the position and attitude of the vent lines. Performance of modified LMP's since introduction indicates that the load sharing between the clustered chutes has been significantly improved.

Revisiting control establishments for emerging energy hubs

NASA Astrophysics Data System (ADS)

Nasirian, Vahidreza

Emerging small-scale energy systems, i.e., microgrids and smartgrids, rely on centralized controllers for voltage regulation, load sharing, and economic dispatch. However, the central controller is a single-point-of-failure in such a design as either the controller or attached communication links failure can render the entire system inoperable. This work seeks for alternative distributed control structures to improve system reliability and help to the scalability of the system. A cooperative distributed controller is proposed that uses a noise-resilient voltage estimator and handles global voltage regulation and load sharing across a DC microgrid. Distributed adaptive droop control is also investigated as an alternative solution. A droop-free distributed control is offered to handle voltage/frequency regulation and load sharing in AC systems. This solution does not require frequency measurement and, thus, features a fast frequency regulation. Distributed economic dispatch is also studied, where a distributed protocol is designed that controls generation units to merge their incremental costs into a consensus and, thus, push the entire system to generate with the minimum cost. Experimental verifications and Hardware-in-the-Loop (HIL) simulations are used to study efficacy of the proposed control protocols.

Determining team cognition from delay analysis using cross recurrence plot.

PubMed

Hajari, Nasim; Cheng, Irene; Bin Zheng; Basu, Anup

2016-08-01

Team cognition is an important factor in evaluating and determining team performance. Forming a team with good shared cognition is even more crucial for laparoscopic surgery applications. In this study, we analyzed the eye tracking data of two surgeons during a laparoscopic simulation operation, then performed Cross Recurrence Analysis (CRA) on the recorded data to study the delay behaviour for good performer and poor performer teams. Dual eye tracking data for twenty two dyad teams were recorded during a laparoscopic task and then the teams were divided into good performer and poor performer teams based on the task times. Eventually we studied the delay between two team members for good and poor performer teams. The results indicated that the good performer teams show a smaller delay comparing to poor performer teams. This study is compatible with gaze overlap analysis between team members and therefore it is a good evidence of shared cognition between team members.

Characterizing output bottlenecks in a supercomputer

DOE Office of Scientific and Technical Information (OSTI.GOV)

Xie, Bing; Chase, Jeffrey; Dillow, David A

2012-01-01

Supercomputer I/O loads are often dominated by writes. HPC (High Performance Computing) file systems are designed to absorb these bursty outputs at high bandwidth through massive parallelism. However, the delivered write bandwidth often falls well below the peak. This paper characterizes the data absorption behavior of a center-wide shared Lustre parallel file system on the Jaguar supercomputer. We use a statistical methodology to address the challenges of accurately measuring a shared machine under production load and to obtain the distribution of bandwidth across samples of compute nodes, storage targets, and time intervals. We observe and quantify limitations from competing traffic,more » contention on storage servers and I/O routers, concurrency limitations in the client compute node operating systems, and the impact of variance (stragglers) on coupled output such as striping. We then examine the implications of our results for application performance and the design of I/O middleware systems on shared supercomputers.« less

A time-shared machine repair problem with mixed spares under N-policy

NASA Astrophysics Data System (ADS)

Jain, Madhu; Shekhar, Chandra; Shukla, Shalini

2016-06-01

The present investigation deals with a machine repair problem consisting of cold and warm standby machines. The machines are subject to breakdown and are repaired by the permanent repairman operating under N-policy. There is provision of one additional removable repairman who is called upon when the work load of failed machines crosses a certain threshold level and is removed as soon as the work load again ceases to that level. Both repairmen recover the failed machines by following the time sharing concept which means that the repairmen share their repair job simultaneously among all the failed machines that have joined the system for repair. Markovian model has been developed by considering the queue dependent rates and solved analytically using the recursive technique. Various performance indices are derived which are further used to obtain the cost function. By taking illustration, numerical simulation and sensitivity analysis have been provided.

An Introduction to Cost Sharing: Why Good Deeds Do Not Go Unpunished.

ERIC Educational Resources Information Center

Seligman, Richard P.

2000-01-01

Examines the concept of cost sharing between grantor agencies and grantee institutions and identifies problems encountered, including use of cost sharing to leverage funds by both funding agencies and grantee institutions; and various grantee institution costing, accounting, and auditing issues, such as effort reporting, the Cost Accounting…

A multi-mode operation control strategy for flexible microgrid based on sliding-mode direct voltage and hierarchical controls.

PubMed

Zhang, Qinjin; Liu, Yancheng; Zhao, Youtao; Wang, Ning

2016-03-01

Multi-mode operation and transient stability are two problems that significantly affect flexible microgrid (MG). This paper proposes a multi-mode operation control strategy for flexible MG based on a three-layer hierarchical structure. The proposed structure is composed of autonomous, cooperative, and scheduling controllers. Autonomous controller is utilized to control the performance of the single micro-source inverter. An adaptive sliding-mode direct voltage loop and an improved droop power loop based on virtual negative impedance are presented respectively to enhance the system disturbance-rejection performance and the power sharing accuracy. Cooperative controller, which is composed of secondary voltage/frequency control and phase synchronization control, is designed to eliminate the voltage/frequency deviations produced by the autonomous controller and prepare for grid connection. Scheduling controller manages the power flow between the MG and the grid. The MG with the improved hierarchical control scheme can achieve seamless transitions from islanded to grid-connected mode and have a good transient performance. In addition the presented work can also optimize the power quality issues and improve the load power sharing accuracy between parallel VSIs. Finally, the transient performance and effectiveness of the proposed control scheme are evaluated by theoretical analysis and simulation results. Copyright © 2015 ISA. Published by Elsevier Ltd. All rights reserved.

Instructors as Investors: A Collegial Conspiracy To Improve Classroom Instruction.

ERIC Educational Resources Information Center

Lawson, Joan Kenny

Due to heavy teaching loads, high adjunct faculty numbers, and scheduling and commuting factors, community college faculty infrequently have the opportunity to share in a collegial forum. In an attempt to provide an opportunity for faculty to share innovative instructional strategies and discuss their work, Hudson Valley Community College (HVCC),…

Distributed control system for parallel-connected DC boost converters

DOEpatents

Goldsmith, Steven

2017-08-15

The disclosed invention is a distributed control system for operating a DC bus fed by disparate DC power sources that service a known or unknown load. The voltage sources vary in v-i characteristics and have time-varying, maximum supply capacities. Each source is connected to the bus via a boost converter, which may have different dynamic characteristics and power transfer capacities, but are controlled through PWM. The invention tracks the time-varying power sources and apportions their power contribution while maintaining the DC bus voltage within the specifications. A central digital controller solves the steady-state system for the optimal duty cycle settings that achieve a desired power supply apportionment scheme for a known or predictable DC load. A distributed networked control system is derived from the central system that utilizes communications among controllers to compute a shared estimate of the unknown time-varying load through shared bus current measurements and bus voltage measurements.

Conditional load and store in a shared memory

DOEpatents

Blumrich, Matthias A; Ohmacht, Martin

2015-02-03

A method, system and computer program product for implementing load-reserve and store-conditional instructions in a multi-processor computing system. The computing system includes a multitude of processor units and a shared memory cache, and each of the processor units has access to the memory cache. In one embodiment, the method comprises providing the memory cache with a series of reservation registers, and storing in these registers addresses reserved in the memory cache for the processor units as a result of issuing load-reserve requests. In this embodiment, when one of the processor units makes a request to store data in the memory cache using a store-conditional request, the reservation registers are checked to determine if an address in the memory cache is reserved for that processor unit. If an address in the memory cache is reserved for that processor, the data are stored at this address.

Successful short-segment instrumentation and fusion for thoracolumbar spine fractures: a consecutive 41/2-year series.

PubMed

Parker, J W; Lane, J R; Karaikovic, E E; Gaines, R W

2000-05-01

A retrospective review of all the surgically managed spinal fractures at the University of Missouri Medical Center during the 41/2-year period from January 1989 to July 1993 was performed. Of the 51 surgically managed patients, 46 were instrumented by short-segment technique (attachment of one level above the fracture to one level below the fracture). The other 5 patients in this consecutive series had multiple trauma. These patients were included in the review because this was a consecutive series. However, they were grouped separately because they were instrumented by long-segment technique because of their multiple organ system injuries. The choice of the anterior or posterior approach for short-segment instrumentation was based on the Load-Sharing Classification published in a 1994 issue of Spine. The purpose of this review was to demonstrate that grading comminution by use of the Load-Sharing Classification for approach selection and the choice of patients with isolated fractures who are cooperative with spinal bracing for 4 months provide the keys to successful short-segment treatment of isolated spinal fractures. The current literature implies that the use of pedicle screws for short-segment instrumentation of spinal fracture is dangerous and inappropriate because of the high screw fracture rate. Charts, operative notes, preoperative and postoperative radiographs, computed tomography scans, and follow-up records of all patients were reviewed carefully from the time of surgery until final follow-up assessment. The Load-Sharing Classification had been used prospectively for all patients before their surgery to determine the approach for short-segment instrumentation. Denis' Pain Scale and Work Scales were obtained during follow-up evaluation for all patients. All patients were observed over 40 months except for 1 patient who died of unrelated causes after 35 months. The mean follow-up period was 66 months (51/2 years). No patient was lost to follow-up evaluation. Prospective application of the Load-Sharing Classification to the patients' injury and restriction of the short-segment approach to cooperative patients with isolated spinal fractures (excluding multisystem trauma patients) allowed 45 of 46 patients instrumented by the short-segment technique to proceed to successful healing in virtual anatomic alignment. The Load-Sharing Classification is a straightforward way to describe the amount of bony comminution in a spinal fracture. When applied to patients with isolated spine fractures who are cooperative with 3 to 4 months of spinal bracing, it can help the surgeon select short-segment pedicle-screw-based fixation using the posterior approach for less comminuted injuries and the anterior approach for those more comminuted. The choice of which fracture-dislocations should be strut grafted anteriorly and which need only posterior short-segment pedicle-screw-based instrumentation also can be made using the Load-Sharing Classification.

Extraneous torque and compensation control on the electric load simulator

NASA Astrophysics Data System (ADS)

Jiao, Zongxia; Li, Chenggong; Ren, Zhiting

2003-09-01

In this paper a novel motor-drive load simulator based on compensation control strategy is proposed and designed. Through analyzing the torque control system consisting of DC torque motor, PWM module and torque sensor, it is shown that performance of the motor-drive load simulator is possible to be as good as that of the electro-hydraulic load simulator in the range of small torque. In the course of loading, the rotation of the actuator would cause a strong disturbance torque through the motor back-EMF, which produces extraneous torque similar as in electro-hydraulic load simulator. This paper analyzes the cause of extraneous torque inside the torque motor in detail and presents an appropriate compensation control with which the extraneous torque can be compensated and the good performance of the torque control system can be obtained. The results of simulation indicate that the compensation is very effective and the track performance is according with the request.

Lack of replication of higher genetic risk load in men than in women with systemic lupus erythematosus.

PubMed

Alonso-Perez, Elisa; Suarez-Gestal, Marian; Calaza, Manuel; Blanco, Francisco J; Suarez, Ana; Santos, Maria Jose; Papasteriades, Chryssa; Carreira, Patricia; Pullmann, Rudolf; Ordi-Ros, Josep; Marchini, Maurizio; Skopouli, Fotini N; Bijl, Marc; Barrizone, Nadia; Sebastiani, Gian Domenico; Migliaresi, Sergio; Witte, Torsten; Lauwerys, Bernard R; Kovacs, Attila; Ruzickova, Sarka; Gomez-Reino, Juan J; Gonzalez, Antonio

2014-06-19

We aimed to replicate a recent study which showed higher genetic risk load at 15 loci in men than in women with systemic lupus erythematosus (SLE). This difference was very significant, and it was interpreted as indicating that men require more genetic susceptibility than women to develop SLE. Nineteen SLE-associated loci (thirteen of which are shared with the previous study) were analyzed in 1,457 SLE patients and 1,728 healthy controls of European ancestry. Genetic risk load was calculated as sex-specific sum genetic risk scores (GRS(s)). Our results did not replicate those of the previous study at either the level of individual loci or the global level of GRS(s). GRS(s) were larger in women than in men (4.20 ± 1.07 in women vs. 3.27 ± 0.98 in men). This very significant difference (P < 10(-16)) was more dependent on the six new loci not included in the previous study (59% of the difference) than on the thirteen loci that are shared (the remaining 41%). However, the 13 shared loci also showed a higher genetic risk load in women than in men in our study (P = 6.6 × 10(-7)), suggesting that heterogeneity of participants, in addition to different loci, contributed to the opposite results. Our results show the lack of a clear trend toward higher genetic risk in one of the sexes for the analyzed SLE loci. They also highlight several limitations of assessments of genetic risk load, including the possibility of ascertainment bias with loci discovered in studies that have included mainly women.

Lack of replication of higher genetic risk load in men than in women with systemic lupus erythematosus

PubMed Central

2014-01-01

Introduction We aimed to replicate a recent study which showed higher genetic risk load at 15 loci in men than in women with systemic lupus erythematosus (SLE). This difference was very significant, and it was interpreted as indicating that men require more genetic susceptibility than women to develop SLE. Methods Nineteen SLE-associated loci (thirteen of which are shared with the previous study) were analyzed in 1,457 SLE patients and 1,728 healthy controls of European ancestry. Genetic risk load was calculated as sex-specific sum genetic risk scores (GRSs). Results Our results did not replicate those of the previous study at either the level of individual loci or the global level of GRSs. GRSs were larger in women than in men (4.20 ± 1.07 in women vs. 3.27 ± 0.98 in men). This very significant difference (P < 10−16) was more dependent on the six new loci not included in the previous study (59% of the difference) than on the thirteen loci that are shared (the remaining 41%). However, the 13 shared loci also showed a higher genetic risk load in women than in men in our study (P = 6.6 × 10−7), suggesting that heterogeneity of participants, in addition to different loci, contributed to the opposite results. Conclusion Our results show the lack of a clear trend toward higher genetic risk in one of the sexes for the analyzed SLE loci. They also highlight several limitations of assessments of genetic risk load, including the possibility of ascertainment bias with loci discovered in studies that have included mainly women. PMID:24946689

Community College Faculty Conceptualizations of Shared Governance: Shared Understandings of a Sociopolitical Reality

ERIC Educational Resources Information Center

Kater, Susan T.

2017-01-01

Objective: This study seeks to deepen understanding of faculty leaders' perceptions of the concept of shared governance. Moving beyond descriptive considerations of faculty perceptions of efficacy of good or bad governance and the discourse focused on declining faculty involvement and conflict paradigms, I consider governance a co-constructed…

47 CFR 27.1166 - Reimbursement under the Cost-Sharing Plan.

Code of Federal Regulations, 2014 CFR

2014-10-01

... licensed frequency band may seek full reimbursement through the clearinghouse of compensable costs, up to... are expected to act in good faith in satisfying the cost-sharing obligations under §§ 27.1160 through... 47 Telecommunication 2 2014-10-01 2014-10-01 false Reimbursement under the Cost-Sharing Plan. 27...

47 CFR 27.1166 - Reimbursement under the Cost-Sharing Plan.

Code of Federal Regulations, 2013 CFR

2013-10-01

... licensed frequency band may seek full reimbursement through the clearinghouse of compensable costs, up to... are expected to act in good faith in satisfying the cost-sharing obligations under §§ 27.1160 through... 47 Telecommunication 2 2013-10-01 2013-10-01 false Reimbursement under the Cost-Sharing Plan. 27...

Is the destabilisation of lake peipsi ecosystem caused by increased phosphorus loading or decreased nitrogen loading?

PubMed

Nõges, T; Laugaste, R; Loigu, E; Nedogarko, I; Skakalski, B; Nõges, P

2005-01-01

Lake Peipsi (3555 km2, mean depth 7.1 m) located on the border of Estonia and Russia is the largest transboundary lake in Europe. L. Peipsi consists of three parts. The shared largest northern part L. Peipsi s.s. (2611 km2, 8.3 m) and the southern L. Pihkva (708 km2, 3.8 m) which belongs mainly to Russia are connected by the river-shaped L. Lämmijärv (236 km2, 2.5 m). The catchment area (44,245 km2 without lake area) is shared between Estonia (33.3%), Russia (58.6%) and Latvia (8%). Intensive eutrophication of L. Peipsi started in the 1970s. The biomass of N2-fixing cyanobacteria was low at heavy nutrient loading in the 1980s. After the collapse of soviet-type agriculture in the early 1990s, the loading of nitrogen sharply decreased. A certain improvement of L. Peipsi s.s. was noticed at the beginning of the 1990s together with the temporary reduction of phosphorus loading from Estonian catchment while in recent years a destabilisation of the ecosystem has been observed. This deterioration has been expressed mainly as intensive blue-green blooms and fish-kills in summer. Reappearance of blooms has been explained by the decrease in N/P loading ratio due to reduced N discharge while in some periods increased phosphorus loading could have supported this trend.

Self-aligning hydraulic piston assembly for tensile testing of ceramic

DOEpatents

Liu, Kenneth C.

1987-01-01

The present invention is directed to a self-aligning grip housing assembly that can transmit an uniaxial load to a tensil specimen without introducing bending stresses into the specimen. Disposed inside said grip housing assembly are a multiplicity of supporting pistons connected to a common source of pressurized oil that carry equal shares of the load applied to the specimen irregardless whether there is initial misalignment between the specimen load column assembly and housing axis.

Self-aligning hydraulic piston assembly for tensile testing of ceramic

DOEpatents

Liu, K.C.

1987-08-18

The present invention is directed to a self-aligning grip housing assembly that can transmit an uniaxial load to a tensile specimen without introducing bending stresses into the specimen. Disposed inside said grip housing assembly are a multiplicity of supporting pistons connected to a common source of pressurized oil that carry equal shares of the load applied to the specimen regardless whether there is initial misalignment between the specimen load column assembly and housing axis. 4 figs.

Sharing the Load: Understanding the Roles of Academics and Host Supervisors in Work-Integrated Learning

ERIC Educational Resources Information Center

Winchester-Seeto, Theresa; Rowe, Anna; Mackaway, Jacqueline

2016-01-01

Student supervision is a key factor underpinning the success of work-integrated learning programs. Supervisory responsibilities can be shared across a number of stakeholders including university staff and host/workplace supervisors. While there have been attempts to understand the roles played by each of these stakeholders, little research has…

Dynamic Transfers Of Tasks Among Computers

NASA Technical Reports Server (NTRS)

Liu, Howard T.; Silvester, John A.

1989-01-01

Allocation scheme gives jobs to idle computers. Ideal resource-sharing algorithm should have following characteristics: Dynamics, decentralized, and heterogeneous. Proposed enhanced receiver-initiated dynamic algorithm (ERIDA) for resource sharing fulfills all above criteria. Provides method balancing workload among hosts, resulting in improvement in response time and throughput performance of total system. Adjusts dynamically to traffic load of each station.

Alternative Fuels Data Center: Foodliner Delivers Goods in Illinois With

Science.gov Websites

Natural Gas Tractors Foodliner Delivers Goods in Illinois With Natural Gas Tractors to someone by E-mail Share Alternative Fuels Data Center: Foodliner Delivers Goods in Illinois With Natural Gas Natural Gas Tractors on Twitter Bookmark Alternative Fuels Data Center: Foodliner Delivers Goods in

UK publicly funded Clinical Trials Units supported a controlled access approach to share individual participant data but highlighted concerns

PubMed Central

Hopkins, Carolyn; Sydes, Matthew; Murray, Gordon; Woolfall, Kerry; Clarke, Mike; Williamson, Paula; Tudur Smith, Catrin

2016-01-01

Objectives Evaluate current data sharing activities of UK publicly funded Clinical Trial Units (CTUs) and identify good practices and barriers. Study Design and Setting Web-based survey of Directors of 45 UK Clinical Research Collaboration (UKCRC)–registered CTUs. Results Twenty-three (51%) CTUs responded: Five (22%) of these had an established data sharing policy and eight (35%) specifically requested consent to use patient data beyond the scope of the original trial. Fifteen (65%) CTUs had received requests for data, and seven (30%) had made external requests for data in the previous 12 months. CTUs supported the need for increased data sharing activities although concerns were raised about patient identification, misuse of data, and financial burden. Custodianship of clinical trial data and requirements for a CTU to align its policy to their parent institutes were also raised. No CTUs supported the use of an open access model for data sharing. Conclusion There is support within the publicly funded UKCRC-registered CTUs for data sharing, but many perceived barriers remain. CTUs are currently using a variety of approaches and procedures for sharing data. This survey has informed further work, including development of guidance for publicly funded CTUs, to promote good practice and facilitate data sharing. PMID:26169841

Value-based cost sharing in the United States and elsewhere can increase patients' use of high-value goods and services.

PubMed

Thomson, Sarah; Schang, Laura; Chernew, Michael E

2013-04-01

This article reviews efforts in the United States and several other member countries of the Organization for Economic Cooperation and Development to encourage patients, through cost sharing, to use goods such as medications, services, and providers that offer better value than other options--an approach known as value-based cost sharing. Among the countries we reviewed, we found that value-based approaches were most commonly applied to drug cost sharing. A few countries, including the United States, employed financial incentives, such as lower copayments, to encourage use of preferred providers or preventive services. Evidence suggests that these efforts can increase patients' use of high-value services--although they may also be associated with high administrative costs and could exacerbate health inequalities among various groups. With careful design, implementation, and evaluation, value-based cost sharing can be an important tool for aligning patient and provider incentives to pursue high-value care.

Genomic research and wide data sharing: views of prospective participants.

PubMed

Trinidad, Susan Brown; Fullerton, Stephanie M; Bares, Julie M; Jarvik, Gail P; Larson, Eric B; Burke, Wylie

2010-08-01

Sharing study data within the research community generates tension between two important goods: promoting scientific goals and protecting the privacy interests of study participants. This study was designed to explore the perceptions, beliefs, and attitudes of research participants and possible future participants regarding genome-wide association studies and repository-based research. Focus group sessions with (1) current research participants, (2) surrogate decision-makers, and (3) three age-defined cohorts (18-34 years, 35-50, >50). Participants expressed a variety of opinions about the acceptability of wide sharing of genetic and phenotypic information for research purposes through large, publicly accessible data repositories. Most believed that making de-identified study data available to the research community is a social good that should be pursued. Privacy and confidentiality concerns were common, although they would not necessarily preclude participation. Many participants voiced reservations about sharing data with for-profit organizations. Trust is central in participants' views regarding data sharing. Further research is needed to develop governance models that enact the values of stewardship.

Nutrient loads within the Sava River Catchment and comparison with load relations in the Baltic region

NASA Astrophysics Data System (ADS)

Levi, Lea; Cvetkovic, Vladimir; Destouni, Georgia

2015-04-01

This study compiles estimates of total nitrogen and phosphorus loads in the Sava River Catchment (SRC), investigates the load relations to human drivers of excess nutrient loading, and compares them with corresponding relations implied by data reported for the Baltic region. Nutrient load data, associated average discharge concentrations (ratio of load to water discharge) and their relations to human drivers are investigated across subcatchments of the SRC with different agricultural and population conditions. The Zagreb subcatchment, which has the smallest area but the highest population density and runoff among the investigated SRC subcatchments, exhibits the highest loads of both nitrogen and phosphorus. Overall for the SRC, results show high correlation (R2=0.93-0.95) of nutrient loads with population density and of concentrations with farmland share. A further question investigated here is then to what degree these relations are comparable with such relations found also for the Baltic region. The two regions are otherwise quite different in their climatic, agricultural and wastewater treatment conditions, so relation consistency, even if surprising, would be important in indicating some degree of relation transferability worthy of further investigation also in other regions. For the Baltic region corresponding correlations to those found in the SRC are in the range R2=0.79-0.88. In particular nitrogen and phosphorus concentration correlations with farmland share are qualitatively consistent between the regions. At the same time, phosphorus concentration correlation with population density shows quite different results between regions. Obtained results indicate a certain level of transferability of dependencies between the two regions and call for further detailed investigations on finer spatial-temporal scales.

The public goods game with a new form of shared reward

NASA Astrophysics Data System (ADS)

Zhang, Chunyan; Chen, Zengqiang

2016-10-01

Altruistic contribution to a common good evenly enjoyed by all group members is hard to explain because of the greater benefits obtained by a defector than a cooperator. A variety of mechanisms have been proposed to resolve the collective dilemma over the years, including rewards for altruism. An underrated and easily ignored phenomenon is that the altruistic behaviors of cooperators not only directly enhance the benefits of their game opponents, but also indirectly produce good influences to other allied members in their surroundings (e.g. relatives or friends). Here we propose a shared reward, in the form of extensive benefits, to extend the traditional definition of the public goods game. Mathematical analysis using the Moran process helps us to obtain the fixation probability for one ‘mutant’ cooperator to invade and dominate the whole defecting population. Results suggest that a tunable parameter exists, above a certain critical value of which natural selection favors cooperation over defection. In addition, analytical results with replicator dynamics show that this critical value influencing the evolution of altruism is closely correlated with the population size, the gaming group size and the synergy factor of the public goods game. These results, based on an extended notion of shared reward and extensive benefits, are expected to provide novel explanations for the emergence of altruistic behaviors.

The ethics of big data as a public good: which public? Whose good?

PubMed

Taylor, Linnet

2016-12-28

International development and humanitarian organizations are increasingly calling for digital data to be treated as a public good because of its value in supplementing scarce national statistics and informing interventions, including in emergencies. In response to this claim, a 'responsible data' movement has evolved to discuss guidelines and frameworks that will establish ethical principles for data sharing. However, this movement is not gaining traction with those who hold the highest-value data, particularly mobile network operators who are proving reluctant to make data collected in low- and middle-income countries accessible through intermediaries. This paper evaluates how the argument for 'data as a public good' fits with the corporate reality of big data, exploring existing models for data sharing. I draw on the idea of corporate data as an ecosystem involving often conflicting rights, duties and claims, in comparison to the utilitarian claim that data's humanitarian value makes it imperative to share them. I assess the power dynamics implied by the idea of data as a public good, and how differing incentives lead actors to adopt particular ethical positions with regard to the use of data.This article is part of the themed issue 'The ethical impact of data science'. © 2016 The Author(s).

Android Protection Mechanism: A Signed Code Security Mechanism for Smartphone Applications

DTIC Science & Technology

2011-03-01

status registers, exceptions, endian support, unaligned access support, synchronization primitives , the Jazelle Extension, and saturated integer...supports comprehensive non-blocking shared-memory synchronization primitives that scale for multiple-processor system designs. This is an improvement... synchronization . Memory semaphores can be loaded and altered without interruption because the load and store operations are atomic. Processor

Indirect Reciprocity, Resource Sharing, and Environmental Risk: Evidence from Field Experiments in Siberia

PubMed Central

Howe, E. Lance; Murphy, James J.; Gerkey, Drew; West, Colin Thor

2016-01-01

Integrating information from existing research, qualitative ethnographic interviews, and participant observation, we designed a field experiment that introduces idiosyncratic environmental risk and a voluntary sharing decision into a standard public goods game. Conducted with subsistence resource users in rural villages on the Kamchatka Peninsula in Northeast Siberia, we find evidence consistent with a model of indirect reciprocity and local social norms of helping the needy. When participants are allowed to develop reputations in the experiments, as is the case in most small-scale societies, we find that sharing is increasingly directed toward individuals experiencing hardship, good reputations increase aid, and the pooling of resources through voluntary sharing becomes more effective. We also find high levels of voluntary sharing without a strong commitment device; however, this form of cooperation does not increase contributions to the public good. Our results are consistent with previous experiments and theoretical models, suggesting strategic risks tied to rewards, punishments, and reputations are important. However, unlike studies that focus solely on strategic risks, we find the effects of rewards, punishments, and reputations are altered by the presence of environmental factors. Unexpected changes in resource abundance increase interdependence and may alter the costs and benefits of cooperation, relative to defection. We suggest environmental factors that increase interdependence are critically important to consider when developing and testing theories of cooperation PMID:27442434

An Analysis of Mongolian Culture-Loaded Words and Their Translation Strategies

ERIC Educational Resources Information Center

Wang, Jian-Jun; He, Long

2014-01-01

With massive cultural exchanges in the world, the translation of culture-loaded words is drawing the attention of translators. Because of different cultural backgrounds and mentalities, the translation of culture-loaded words may lead to misunderstanding or confusion to target readers. Thus, a good mastery of culture-loaded words is a must for…

MED COMMITTEE STRUCTURE

EPA Science Inventory

It is beneficial to share good Diversity-related practices with other NHEERL Divisions. Sharing of this information will help MED showcase the many activities that are in place for Diversity that we are using to help us become a level 4 organization.

Do open access data policies inhibit innovation?

USGS Publications Warehouse

Katzner, Todd E.

2015-01-01

There has been a great deal of attention paid recently to the idea of data sharing (Van Noorden 2014, Beardsley 2015, Nature Publishing Group2015, www.copdess.com). However, the vast majority of these arguments are in agreement and present as fait accompli the idea that data are a public good and that therefore, once published, they should become open access. In fact, although there are many good reasons for data sharing, there also are a number of cogent and coherent cases to be made against open-access policies (e.g., Fenichel and Skelly 2015). The goal of this piece is not to debate the relevance or accuracy of the points made in favor of data sharing but to elevate the discussion by pointing out key problems with open-access policies and to identify central issues that, if solved, will enhance the utility of data sharing to science and society.

Automatic Generation of Directive-Based Parallel Programs for Shared Memory Parallel Systems

NASA Technical Reports Server (NTRS)

Jin, Hao-Qiang; Yan, Jerry; Frumkin, Michael

2000-01-01

The shared-memory programming model is a very effective way to achieve parallelism on shared memory parallel computers. As great progress was made in hardware and software technologies, performance of parallel programs with compiler directives has demonstrated large improvement. The introduction of OpenMP directives, the industrial standard for shared-memory programming, has minimized the issue of portability. Due to its ease of programming and its good performance, the technique has become very popular. In this study, we have extended CAPTools, a computer-aided parallelization toolkit, to automatically generate directive-based, OpenMP, parallel programs. We outline techniques used in the implementation of the tool and present test results on the NAS parallel benchmarks and ARC3D, a CFD application. This work demonstrates the great potential of using computer-aided tools to quickly port parallel programs and also achieve good performance.

Genomes in the cloud: balancing privacy rights and the public good.

PubMed

Ohno-Machado, Lucila; Farcas, Claudiu; Kim, Jihoon; Wang, Shuang; Jiang, Xiaoqian

2013-01-01

The NIH-funded iDASH1 National Center for Biomedical Computing was created in 2010 with the goal of developing infrastructure, algorithms, and tools to integrate Data for Analysis, 'anonymization,' and SHaring. iDASH is based on the premise that, while a strong case for not sharing information to preserve individual privacy can be made, an equally compelling case for sharing genome information for the public good (i.e., to support new discoveries that promote health or alleviate the burden of disease) should also be made. In fact, these cases do not need to be mutually exclusive: genome data sharing on a cloud does not necessarily have to compromise individual privacy, although current practices need significant improvement. So far, protection of subject data from re-identification and misuse has been relying primarily on regulations such as HIPAA, the Common Rule, and GINA. However, protection of biometrics such as a genome requires specialized infrastructure and tools.

Potential for shared log transport services

Treesearch

Tim McDonald; Steve Taylor; Jorge Valenzuela

2001-01-01

A simulation model of a log transport logistics network was developed. The model could be structured to either share truck capacity among a group of loggers, or to assign a fixed number of trucks to individual loggers. Another variation of the model allowed the use of a staging yard to set out loaded trailers and deliver them to destinations using dedicated shuttle...

Demonstration and Evaluation of the Effects of Incentives on Resource Sharing Using a Computerized Interlibrary Communications System.

ERIC Educational Resources Information Center

New England Board of Higher Education, Wellesley, MA. New England Library Information Network.

The potential for using a computerized communication system to facilitate resource sharing in New England has been investigated by the staff of the New England Information Network (NELINET). The central purpose of their research was to determine whether a strategy for load leveling of interlibrary loan (ILL) requests could be implemented online as…

Power load prediction based on GM (1,1)

NASA Astrophysics Data System (ADS)

Wu, Di

2017-05-01

Currently, Chinese power load prediction is highly focused; the paper deeply studies grey prediction and applies it to Chinese electricity consumption during the recent 14 years; through after-test test, it obtains grey prediction which has good adaptability to medium and long-term power load.

Human pelvis loading rig for static and dynamic stress analysis.

PubMed

Zanetti, Elisabetta M; Bignardi, Cristina; Audenino, Alberto L

2012-01-01

This work is aimed at designing and constructing a loading rig for the synthetic hemi-pelvis; this system has been conceived with the goal of applying differently oriented articular forces in order to experimentally test the stress distribution and the stability of surgical reconstructions like, for example, hip arthroplasty or pelvic fixation. This device can be interfaced with a usual loading machine; it preserves the anatomy of the hemi-pelvis; it is simply constrained and it allows the simulation of all physiologic activities. Moreover, the visual accessibility of the peri-acetabular area has been guaranteed and this is imperative in order to be able to perform full-field analyses like a thermoelastic or photoelastic stress analysis. First experimental trials have shown a good repeatability of loading-unloading cycles (<1.2%), a low hysteresis (<2.4%) and a good dynamic behaviour (up to 10 Hz loading frequencies).

Intelligent Energy Management System for PV-Battery-based Microgrids in Future DC Homes

NASA Astrophysics Data System (ADS)

Chauhan, R. K.; Rajpurohit, B. S.; Gonzalez-Longatt, F. M.; Singh, S. N.

2016-06-01

This paper presents a novel intelligent energy management system (IEMS) for a DC microgrid connected to the public utility (PU), photovoltaic (PV) and multi-battery bank (BB). The control objectives of the proposed IEMS system are: (i) to ensure the load sharing (according to the source capacity) among sources, (ii) to reduce the power loss (high efficient) in the system, and (iii) to enhance the system reliability and power quality. The proposed IEMS is novel because it follows the ideal characteristics of the battery (with some assumptions) for the power sharing and the selection of the closest source to minimize the power losses. The IEMS allows continuous and accurate monitoring with intelligent control of distribution system operations such as battery bank energy storage (BBES) system, PV system and customer utilization of electric power. The proposed IEMS gives the better operational performance for operating conditions in terms of load sharing, loss minimization, and reliability enhancement of the DC microgrid.

Understanding negative impacts of perceived cognitive load on job learning effectiveness: a social capital solution.

PubMed

Lin, Chieh-Peng

2010-12-01

This study proposes a model explaining how social capital helps ease excessively required mental effort. Although organizational researchers have studied both social capital and cognitive load, no prior research has critically examined the role of social capital in improving individuals' mental load and effort and consequently enhancing job learning effectiveness. This study surveys participants made up of professionals in Taiwan's information technology industry. It measures the constructs with the use of 5-point Likert-type scale items modified from existing literature. The survey data were analyzed with the use of structural equation modeling. Job learning effectiveness is negatively influenced by role ambiguity and role conflict. Time pressure has a positive influence on role ambiguity and role conflict Although the relationship between task complexity and role ambiguity is insignificant, task complexity has a positive influence on role conflict. Because the relationship between network ties and role conflict is insignificant, trust has a negative influence on role conflict. Last, shared vision has a negative influence on role ambiguity. This study provides an example of how social capital can be applied as a useful remedy to ease the negative impact of perceived cognitive load on job learning effectiveness. The negative relationship between shared vision and role ambiguity suggests that a shared vision helps in disseminating organizationally common goals and directions among employees to alleviate individuals' mental efforts in dealing with the ambiguity of their job roles. A firm's management team should take actions to decrease role conflict by strengthening trust among employees.

Critical material attributes (CMAs) of strip films loaded with poorly water-soluble drug nanoparticles: III. Impact of drug nanoparticle loading.

PubMed

Krull, Scott M; Moreno, Jacqueline; Li, Meng; Bilgili, Ecevit; Davé, Rajesh N

2017-05-15

Polymer strip films have emerged as a robust platform for poorly water-soluble drug delivery. However, the common conception is that films cannot exceed low drug loadings, mainly due to poor drug stability, slow release, and film brittleness. This study explores the ability to achieve high loadings of poorly water-soluble drug nanoparticles in strip films while retaining good mechanical properties and enhanced dissolution rate. Aqueous suspensions containing up to 30wt% griseofulvin nanoparticles were prepared via wet stirred media milling and incorporated into hydroxypropyl methylcellulose (HPMC) films. Griseofulvin loading in films was adjusted to be between 9 and 49wt% in HPMC-E15 films and 30 and 73wt% in HPMC-E4M films by varying the mixing ratio of HPMC solution-to-griseofulvin suspension. All films exhibited good content uniformity and nanoparticle redispersibility up to 50wt% griseofulvin, while E4M films above 50wt% griseofulvin had slightly worse content uniformity and poor nanoparticle redispersibility. Increasing drug loading in films generally required more time to achieve 100% release during dissolution, although polymer-drug clusters dispersed from E4M films above 50wt% griseofulvin, resulting in similar dissolution profiles. While all films exhibited good tensile strength, a significant decrease in percent elongation was observed above 40-50wt% GF, resulting in brittle films. Copyright © 2017 Elsevier B.V. All rights reserved.

Load sharing in distributed real-time systems with state-change broadcasts

NASA Technical Reports Server (NTRS)

Shin, Kang G.; Chang, Yi-Chieh

1989-01-01

A decentralized dynamic load-sharing (LS) method based on state-change broadcasts is proposed for a distributed real-time system. Whenever the state of a node changes from underloaded to fully loaded and vice versa, the node broadcasts this change to a set of nodes, called a buddy set, in the system. The performance of the method is evaluated with both analytic modeling and simulation. It is modeled first by an embedded Markov chain for which numerical solutions are derived. The model solutions are then used to calculate the distribution of queue lengths at the nodes and the probability of meeting task deadlines. The analytical results show that buddy sets of 10 nodes outperform those of less than 10 nodes, and the incremental benefit gained from increasing the buddy set size beyond 15 nodes is insignificant. These and other analytical results are verified by simulation. The proposed LS method is shown to meet task deadlines with a very high probability.

Polygenic loading for major depression is associated with specific medical comorbidity

PubMed Central

McCoy, T H; Castro, V M; Snapper, L; Hart, K; Januzzi, J L; Huffman, J C; Perlis, R H

2017-01-01

Major depressive disorder frequently co-occurs with medical disorders, raising the possibility of shared genetic liability. Recent identification of 15 novel genetic loci associated with depression allows direct investigation of this question. In cohorts of individuals participating in biobanks at two academic medical centers, we calculated polygenic loading for risk loci reported to be associated with depression. We then examined the association between such loading and 50 groups of clinical diagnoses, or topics, drawn from these patients' electronic health records, determined using a novel application of latent Dirichilet allocation. Three topics showed experiment-wide association with the depression liability score; these included diagnostic groups representing greater prevalence of mood and anxiety disorders, greater prevalence of cardiac ischemia, and a decreased prevalence of heart failure. The latter two associations persisted even among individuals with no mood disorder diagnosis. This application of a novel method for grouping related diagnoses in biobanks indicate shared genetic risk for depression and cardiac disease, with a pattern suggesting greater ischemic risk and diminished heart failure risk. PMID:28926002

Testing Orions Fairing Separation System

NASA Technical Reports Server (NTRS)

Martinez, Henry; Cloutier, Chris; Lemmon, Heber; Rakes, Daniel; Oldham, Joe; Schlagel, Keith

2014-01-01

Traditional fairing systems are designed to fully encapsulate and protect their payload from the harsh ascent environment including acoustic vibrations, aerodynamic forces and heating. The Orion fairing separation system performs this function and more by also sharing approximately half of the vehicle structural load during ascent. This load-share condition through launch and during jettison allows for a substantial increase in mass to orbit. A series of component-level development tests were completed to evaluate and characterize each component within Orion's unique fairing separation system. Two full-scale separation tests were performed to verify system-level functionality and provide verification data. This paper summarizes the fairing spring, Pyramidal Separation Mechanism and forward seal system component-level development tests, system-level separation tests, and lessons learned.

Dynamic programming on a shared-memory multiprocessor

NASA Technical Reports Server (NTRS)

Edmonds, Phil; Chu, Eleanor; George, Alan

1993-01-01

Three new algorithms for solving dynamic programming problems on a shared-memory parallel computer are described. All three algorithms attempt to balance work load, while keeping synchronization cost low. In particular, for a multiprocessor having p processors, an analysis of the best algorithm shows that the arithmetic cost is O(n-cubed/6p) and that the synchronization cost is O(absolute value of log sub C n) if p much less than n, where C = (2p-1)/(2p + 1) and n is the size of the problem. The low synchronization cost is important for machines where synchronization is expensive. Analysis and experiments show that the best algorithm is effective in balancing the work load and producing high efficiency.

Tailoring Shared Governance to the Needs and Opportunities of the Times. Research & Occasional Paper Series: CSHE.13.13

ERIC Educational Resources Information Center

King, C. Judson

2013-01-01

Shared governance between the administration and faculty has been traditional for most public universities, but varies considerably in its nature and effectiveness. In the United States it probably takes its most structured form at the University of California. There are good reasons for having shared governance, and yet it tends to be poorly…

Microgrid Study: Energy Security for DoD Installations

DTIC Science & Technology

2012-06-18

security, efficiency, and the incorporation of renewable and distributed energy resources into microgrids, as well as the factors that might facilitate...better understand how different environmental factors affected the choice of optimal microgrid architecture. Environmental factors in this context...lower costs—Networking generation assets allow for load sharing, allowing fewer generators to run at higher load factors and therefore with greater

Cross-Priming of Naive Cd8 T Cells against Melanoma Antigens Using Dendritic Cells Loaded with Killed Allogeneic Melanoma Cells

PubMed Central

Berard, Frederic; Blanco, Patrick; Davoust, Jean; Neidhart-Berard, Eve-Marie; Nouri-Shirazi, Mahyar; Taquet, Nicolas; Rimoldi, Donata; Cerottini, Jean Charles; Banchereau, Jacques; Palucka, A. Karolina

2000-01-01

The goal of tumor immunotherapy is to elicit immune responses against autologous tumors. It would be highly desirable that such responses include multiple T cell clones against multiple tumor antigens. This could be obtained using the antigen presenting capacity of dendritic cells (DCs) and cross-priming. That is, one could load the DC with tumor lines of any human histocompatibility leukocyte antigen (HLA) type to elicit T cell responses against the autologous tumor. In this study, we show that human DCs derived from monocytes and loaded with killed melanoma cells prime naive CD45RA+CD27+CD8+ T cells against the four shared melanoma antigens: MAGE-3, gp100, tyrosinase, and MART-1. HLA-A201+ naive T cells primed by DCs loaded with HLA-A201− melanoma cells are able to kill several HLA-A201+ melanoma targets. Cytotoxic T lymphocyte priming towards melanoma antigens is also obtained with cells from metastatic melanoma patients. This demonstration of cross-priming against shared tumor antigens builds the basis for using allogeneic tumor cell lines to deliver tumor antigens to DCs for vaccination protocols. PMID:11104796

Wave Fluid Film Bearing Tests for an Aviation Gearbox

NASA Technical Reports Server (NTRS)

Dimofte, Florin; Proctor, Margaret P.; Fleming, David P.; Keith, Theo G., Jr.

2000-01-01

An oil-lubricated wave journal-thrust bearing assembly was successfully tested at conditions found in general aviation engine gearboxes. The bearing performed well at both steady state conditions and in start-stop tests. It ran stably under all loading conditions, including zero load, at all speeds up to 16 000 rpm. The bearing carried 25 percent more load than required for the gearbox application, supporting 8900 N (94 bars average pressure), and showed very good thermal stability. 450 start-stop cycles were also performed, including 350 cycles without oil supply during starting and stopping. Test results and numerical predictions were in good agreement.

Evaluation of the Display of Cognitive State Feedback to Drive Adaptive Task Sharing

PubMed Central

Dorneich, Michael C.; Passinger, Břetislav; Hamblin, Christopher; Keinrath, Claudia; Vašek, Jiři; Whitlow, Stephen D.; Beekhuyzen, Martijn

2017-01-01

This paper presents an adaptive system intended to address workload imbalances between pilots in future flight decks. Team performance can be maximized when task demands are balanced within crew capabilities and resources. Good communication skills enable teams to adapt to changes in workload, and include the balancing of workload between team members This work addresses human factors priorities in the aviation domain with the goal to develop concepts that balance operator workload, support future operator roles and responsibilities, and support new task requirements, while allowing operators to focus on the most safety critical tasks. A traditional closed-loop adaptive system includes the decision logic to turn automated adaptations on and off. This work takes a novel approach of replacing the decision logic, normally performed by the automation, with human decisions. The Crew Workload Manager (CWLM) was developed to objectively display the workload between pilots and recommend task sharing; it is then the pilots who “close the loop” by deciding how to best mitigate unbalanced workload. The workload was manipulated by the Shared Aviation Task Battery (SAT-B), which was developed to provide opportunities for pilots to mitigate imbalances in workload between crew members. Participants were put in situations of high and low workload (i.e., workload was manipulated as opposed to being measured), the workload was then displayed to pilots, and pilots were allowed to decide how to mitigate the situation. An evaluation was performed that utilized the SAT-B to manipulate workload and create workload imbalances. Overall, the CWLM reduced the time spent in unbalanced workload and improved the crew coordination in task sharing while not negatively impacting concurrent task performance. Balancing workload has the potential to improve crew resource management and task performance over time, and reduce errors and fatigue. Paired with a real-time workload measurement system, the CWLM could help teams manage their own task load distribution. PMID:28400716

Evaluation of the Display of Cognitive State Feedback to Drive Adaptive Task Sharing.

PubMed

Dorneich, Michael C; Passinger, Břetislav; Hamblin, Christopher; Keinrath, Claudia; Vašek, Jiři; Whitlow, Stephen D; Beekhuyzen, Martijn

2017-01-01

This paper presents an adaptive system intended to address workload imbalances between pilots in future flight decks. Team performance can be maximized when task demands are balanced within crew capabilities and resources. Good communication skills enable teams to adapt to changes in workload, and include the balancing of workload between team members This work addresses human factors priorities in the aviation domain with the goal to develop concepts that balance operator workload, support future operator roles and responsibilities, and support new task requirements, while allowing operators to focus on the most safety critical tasks. A traditional closed-loop adaptive system includes the decision logic to turn automated adaptations on and off. This work takes a novel approach of replacing the decision logic, normally performed by the automation, with human decisions. The Crew Workload Manager (CWLM) was developed to objectively display the workload between pilots and recommend task sharing; it is then the pilots who "close the loop" by deciding how to best mitigate unbalanced workload. The workload was manipulated by the Shared Aviation Task Battery (SAT-B), which was developed to provide opportunities for pilots to mitigate imbalances in workload between crew members. Participants were put in situations of high and low workload (i.e., workload was manipulated as opposed to being measured), the workload was then displayed to pilots, and pilots were allowed to decide how to mitigate the situation. An evaluation was performed that utilized the SAT-B to manipulate workload and create workload imbalances. Overall, the CWLM reduced the time spent in unbalanced workload and improved the crew coordination in task sharing while not negatively impacting concurrent task performance. Balancing workload has the potential to improve crew resource management and task performance over time, and reduce errors and fatigue. Paired with a real-time workload measurement system, the CWLM could help teams manage their own task load distribution.

Cardiology needs good planning for the future.

PubMed

Goodroe, J H; Hicks, K J

1990-08-01

In today's health care environment, hospitals have to develop strategies to maintain their market share, especially in cardiac services. The authors share generic strategies in cost leadership, product differentiation and technological leadership that can be adapted and implemented in cardiac centers.

A Privacy-Protecting Multi-Coupon Scheme with Stronger Protection Against Splitting

NASA Astrophysics Data System (ADS)

Chen, Liqun; Escalante B., Alberto N.; Löhr, Hans; Manulis, Mark; Sadeghi, Ahmad-Reza

A multi-coupon (MC) represents a collection of k coupons that a user can redeem to a vendor in exchange for some goods or services. Nguyen (FC 2006), deepening the ideas of Chen et al. (FC 2005), introduced an unforgeable privacy-protecting MC system with constant complexity for issuing and redemption of MCs, that discourages sharing of coupons through a property called weak unsplittability, where sharing of a single coupon implies sharing of the whole multi-coupon (all-or-nothing sharing). Both schemes still lack some features required by many applications in practice, and also stronger forms of unsplittability are desirable. In this paper, we propose a new security model for MC systems with stronger definitions, followed by a concrete realization where single coupons within a MC may represent different goods or services, have independent validity periods, and must be redeemed sequentially ensuring a stronger version of unsplittability compared to all-or-nothing sharing. The complexity of the proposed scheme is linear in k for the generation of multi-coupons and constant for each redeemed single coupon.

Failure criterion for materials with spatially correlated mechanical properties

NASA Astrophysics Data System (ADS)

Faillettaz, J.; Or, D.

2015-03-01

The role of spatially correlated mechanical elements in the failure behavior of heterogeneous materials represented by fiber bundle models (FBMs) was evaluated systematically for different load redistribution rules. Increasing the range of spatial correlation for FBMs with local load sharing is marked by a transition from ductilelike failure characteristics into brittlelike failure. The study identified a global failure criterion based on macroscopic properties (external load and cumulative damage) that is independent of spatial correlation or load redistribution rules. This general metric could be applied to assess the mechanical stability of complex and heterogeneous systems and thus provide an important component for early warning of a class of geophysical ruptures.

Good Practices for Transforming Education

ERIC Educational Resources Information Center

Benavente, Ana; Panchaud, Christine

2008-01-01

This text is a guide to the reading and interpretation of the "good practices" that are developing in the countries participating in this project and elsewhere. A systematic approach to the factors making up a "good practice" has enabled us to share our analyses in a more structured manner and to reflect on their potential for…

AIR VEHICLES INTEGRATION AND TECHNOLOGY RESEARCH (AVIATR) Task Order 0015: Predictive Capability for Hypersonic Structural Response and Life Prediction Phase 1 - Identification of Knowledge Gaps

DTIC Science & Technology

2010-08-01

using load - bearing tanks with parasitic TPS was considered to be a lower weight design when all details were accounted for. The cold structure...share one very key element with the design of load bearing hot structure – the design drive toward thin gauge metallic skin under complex and coupled...39 skin panel joints and their susceptibility to high acoustic loading coupled with transient heating, and hot structure skin deflections and

Gearbox Reliability Collaborative Gearbox 3 Planet Bearing Calibration

DOE Office of Scientific and Technical Information (OSTI.GOV)

Keller, Jonathan

2017-03-24

The Gearbox Reliability Collaborative gearbox was redesigned to improve its load-sharing characteristics and predicted fatigue life. The most important aspect of the redesign was to replace the cylindrical roller bearings with preloaded tapered roller bearings in the planetary section. Similar to previous work, the strain gages installed on the planet tapered roller bearings were calibrated in a load frame. This report describes the calibration tests and provides the factors necessary to convert the measured units from dynamometer testing to bearing loads, suitable for comparison to engineering models.

Securing the Adoption of Good Practice in Scotland's Colleges. A Report by HM Inspectors of Education for the Scottish Funding Council

ERIC Educational Resources Information Center

Her Majesty's Inspectorate of Education, 2006

2006-01-01

The purpose of this report is to describe the main mechanisms currently in use in Scotland's colleges to ensure that the adoption of good practice actually happens. It investigates how colleges identify and promote good practice in their own institutions; how they develop strategies and processes to ensure good practice is shared, adopted and…

Thermal performance of a multi-evaporator loop heat pipe with thermal masses and thermal electrical coolers

NASA Technical Reports Server (NTRS)

Ku, Jentung; Ottenstein, Laura; Birur, Gajanana

2004-01-01

This paper describes thermal performance of a loop heat pipe (LHP) with two evaporators and two condensers in ambient testing. Each evaporator has an outer diameter of 15mm and a length of 76mm, and has an integral compensation chamber (CC). An aluminum mass of 500 grams is attached to each evaporator to simulate the instrument mass. A thermal electric cooler (TEC) is installed on each CC to provide heating as well as cooling for CC temperature control. A flow regulator is installed in the condenser section to prevent vapor from going back to the evaporators in the event that one of condenser is fully utilized. Ammonia was used ad the working fluid. Tests conducted included start-up, power cycle, heat load sharing, sink temperature cycle, operating temperature control with TECs, and capillary limit tests. Experimental data showed that the loop could start with a heat load of less than 1OW even with added thermal masses. The loop operated stably with even and uneven evaporator heat loads, and even and uneven condenser sink temperatures. The operating temperature could be controlled within +/-0.5K of the set point temperature using either or both TECs, and the required TEC control heater power was less than 2W under most test conditions. Heat load sharing between the two evaporators was also successfully demonstrated. The loop had a heat transport capability of 120W to 140W, and could recover from a dry-out when the heat load was reduced. The 500-gram aluminum mass on each evaporator had a negligible effect on the loop operation. Existing LHPs servicing the orbiting spacecraft have a single evaporator with an outer diameter of about 25mm. Important performance characteristics demonstrated by this LHP included: 1) Operation of an LHP with 15mm diameter evaporators; 2) Robustness and reliability of an LHP with multiple evaporators and multiple condensers under various test conditions; 3) Heat load sharing among LHP evaporators; 4) Effectiveness of TECs in controlling the LHP operating temperature; and 5) Effectiveness of the flow regulator in preventing vapor from going back the evaporators.

Thermal Performance of a Multi-Evaporator Loop Heat Pipe with Thermal Masses and Thermoelectric Coolers

NASA Technical Reports Server (NTRS)

Ku, Jen-Tung; Ottenstein, Laura; Birur, Gajanana

2004-01-01

This paper describes thermal performance of a loop heat pipe (LHP) with two evaporators and two condensers in ambient testing. Each evaporator has an outer diameter of 15mm and a length of 76mm, and has an integral compensation chamber (CC). An aluminum mass of 500 grams is attached to each evaporator to simulate the instrument mass. A thermoelectric cooler (TEC) is installed on each CC to provide heating as well as cooling for CC temperature control. A flow regulator is installed in the condenser section to prevent vapor from going back to the evaporators in the event that one of the condensers is fully utilized. Ammonia was used as the working fluid. Tests conducted included start-up, power cycle, heat load sharing, sink temperature cycle, operating temperature control with TECs, and capillary limit tests. Experimental data showed that the loop could start with a heat load of less than 10W even with added thermal masses. The loop operated stably with even and uneven evaporator heat loads, and even and uneven condenser sink temperatures. The operating temperature could be controlled within +/- 0.5K of the set point temperature using either or both TECs, and the required TEC control heater power was less than 2W under most test conditions. Heat load sharing between the two evaporators was also successfully demonstrated. The loop had a heat transport capability of 120W to 140W, and could recover from a dry-out when the heat load was reduced. The 500-gram aluminum mass on each evaporator had a negligible effect on the loop operation. Existing LHPs servicing orbiting spacecraft have a single evaporator with an outer diameter of about 25mm. Important performance characteristics demonstrated by this LHP included: 1) Operation of an LHP with 15mm diameter evaporators; 2) Robustness and reliability of an LHP with multiple evaporators and multiple condensers under various test conditions; 3) Heat load sharing among LHP evaporators; 4) Effectiveness of TECs in controlling the LHP operating temperature; and 5 ) Effectiveness of the flow regulator in preventing vapor from going back the evaporators.

Good Agreements Make Good Friends

PubMed Central

Han, The Anh; Pereira, Luís Moniz; Santos, Francisco C.; Lenaerts, Tom

2013-01-01

When starting a new collaborative endeavor, it pays to establish upfront how strongly your partner commits to the common goal and what compensation can be expected in case the collaboration is violated. Diverse examples in biological and social contexts have demonstrated the pervasiveness of making prior agreements on posterior compensations, suggesting that this behavior could have been shaped by natural selection. Here, we analyze the evolutionary relevance of such a commitment strategy and relate it to the costly punishment strategy, where no prior agreements are made. We show that when the cost of arranging a commitment deal lies within certain limits, substantial levels of cooperation can be achieved. Moreover, these levels are higher than that achieved by simple costly punishment, especially when one insists on sharing the arrangement cost. Not only do we show that good agreements make good friends, agreements based on shared costs result in even better outcomes. PMID:24045873

Does the benefits schedule of cash assistance programs affect the purchase of temptation goods? Evidence from Peru.

PubMed

White, Justin S; Basu, Sanjay

2016-03-01

A critique of cash assistance programs is that beneficiaries may spend the money on "temptation goods" such as alcohol and tobacco. We exploit a change in the payment schedule of Peru's conditional cash transfer program to identify the impact of benefit receipt frequency on the purchase of temptation goods. We use annual household data among cross-sectional and panel samples to analyze the effect of the policy change on the share of the household budget devoted to four categories of temptation goods. Using a difference-in-differences estimation approach, we find that larger, less frequent payments increased the expenditure share of alcohol by 55-80% and sweets by 10-40%, although the absolute magnitudes of these effects are small. Our study suggests that less frequent benefits scheduling may lead cash recipients to make certain types of temptation purchases. Copyright © 2016 Elsevier B.V. All rights reserved.

46 CFR 195.11-25 - Loading and stowage.

Code of Federal Regulations, 2010 CFR

2010-10-01

.... (a) Vans required to be inspected and bearing a current inspection stamp may be accepted for loading... to his inspection to determine that electrical and pressure connections are in good condition and...

Technique Feature Analysis or Involvement Load Hypothesis: Estimating Their Predictive Power in Vocabulary Learning.

PubMed

Gohar, Manoochehr Jafari; Rahmanian, Mahboubeh; Soleimani, Hassan

2018-02-05

Vocabulary learning has always been a great concern and has attracted the attention of many researchers. Among the vocabulary learning hypotheses, involvement load hypothesis and technique feature analysis have been proposed which attempt to bring some concepts like noticing, motivation, and generation into focus. In the current study, 90 high proficiency EFL students were assigned into three vocabulary tasks of sentence making, composition, and reading comprehension in order to examine the power of involvement load hypothesis and technique feature analysis frameworks in predicting vocabulary learning. It was unraveled that involvement load hypothesis cannot be a good predictor, and technique feature analysis was a good predictor in pretest to posttest score change and not in during-task activity. The implications of the results will be discussed in the light of preparing vocabulary tasks.

The effects of acute stress and perceptual load on distractor interference.

PubMed

Sato, Hirotsune; Takenaka, Ippei; Kawahara, Jun I

2012-01-01

Selective attention can be improved under conditions in which a high perceptual load is assumed to exhaust cognitive resources, leaving scarce resources for distractor processing. The present study examined whether perceptual load and acute stress share common attentional resources by manipulating perceptual and stress loads. Participants identified a target within an array of nontargets that were flanked by compatible or incompatible distractors. Attentional selectivity was measured by longer reaction times in response to the incompatible than to the compatible distractors. Participants in the stress group participated in a speech test that increased anxiety and threatened self-esteem. The effect of perceptual load interacted with the stress manipulation in that participants in the control group demonstrated an interference effect under the low perceptual load condition, whereas such interference disappeared under the high perceptual load condition. Importantly, the stress group showed virtually no interference under the low perceptual load condition, whereas substantial interference occurred under the high perceptual load condition. These results suggest that perceptual and stress related demands consume the same attentional resources.

PWFQ: a priority-based weighted fair queueing algorithm for the downstream transmission of EPON

NASA Astrophysics Data System (ADS)

Xu, Sunjuan; Ye, Jiajun; Zou, Junni

2005-11-01

In the downstream direction of EPON, all ethernet frames share one downlink channel from the OLT to destination ONUs. To guarantee differentiated services, a scheduling algorithm is needed to solve the link-sharing issue. In this paper, we first review the classical WFQ algorithm and point out the shortcomings existing in the fair queueing principle of WFQ algorithm for EPON. Then we propose a novel scheduling algorithm called Priority-based WFQ (PWFQ) algorithm which distributes bandwidth based on priority. PWFQ algorithm can guarantee the quality of real-time services whether under light load or under heavy load. Simulation results also show that PWFQ algorithm not only can improve delay performance of real-time services, but can also meet the worst-case delay bound requirements.

Parent and Adolescent Distribution of Responsibility for Diabetes Self-care: Links to Health Outcomes

PubMed Central

Reynolds, Kerry A.; Siminerio, Linda; Escobar, Oscar; Becker, Dorothy

2008-01-01

Objective To examine the relation of adolescent and parent responsibility distribution for diabetes self-care to psychological and physical health. Methods We interviewed children (mean age 12 years) annually for 3 years and asked parents to complete a questionnaire. Both reported how diabetes self-care was distributed in the family. Amount of responsibility held by the child only, the parent only, and shared between child and parent was calculated. Psychological distress, competence, and diabetes outcomes were assessed at each wave. Results In both cross-sectional and longitudinal (lagged) analyses, multilevel modeling showed that shared responsibility was consistently associated with better psychological health, good self-care behavior, and good metabolic control, whereas child and parent responsibility were not. In some cases, links of shared responsibility to health outcomes were stronger among older adolescents. Conclusions These findings highlight the importance of shared responsibility for diabetes self-care through early to middle adolescence. PMID:17848390

Aerodynamic and heat transfer analysis of the low aspect ratio turbine

NASA Astrophysics Data System (ADS)

Sharma, O. P.; Nguyen, P.; Ni, R. H.; Rhie, C. M.; White, J. A.

1987-06-01

The available two- and three-dimensional codes are used to estimate external heat loads and aerodynamic characteristics of a highly loaded turbine stage in order to demonstrate state-of-the-art methodologies in turbine design. By using data for a low aspect ratio turbine, it is found that a three-dimensional multistage Euler code gives good averall predictions for the turbine stage, yielding good estimates of the stage pressure ratio, mass flow, and exit gas angles. The nozzle vane loading distribution is well predicted by both the three-dimensional multistage Euler and three-dimensional Navier-Stokes codes. The vane airfoil surface Stanton number distributions, however, are underpredicted by both two- and three-dimensional boundary value analysis.

Coupled CFD/CSD Analysis of an Active-Twist Rotor in a Wind Tunnel with Experimental Validation

NASA Technical Reports Server (NTRS)

Massey, Steven J.; Kreshock, Andrew R.; Sekula, Martin K.

2015-01-01

An unsteady Reynolds averaged Navier-Stokes analysis loosely coupled with a comprehensive rotorcraft code is presented for a second-generation active-twist rotor. High fidelity Navier-Stokes results for three configurations: an isolated rotor, a rotor with fuselage, and a rotor with fuselage mounted in a wind tunnel, are compared to lifting-line theory based comprehensive rotorcraft code calculations and wind tunnel data. Results indicate that CFD/CSD predictions of flapwise bending moments are in good agreement with wind tunnel measurements for configurations with a fuselage, and that modeling the wind tunnel environment does not significantly enhance computed results. Actuated rotor results for the rotor with fuselage configuration are also validated for predictions of vibratory blade loads and fixed-system vibratory loads. Varying levels of agreement with wind tunnel measurements are observed for blade vibratory loads, depending on the load component (flap, lag, or torsion) and the harmonic being examined. Predicted trends in fixed-system vibratory loads are in good agreement with wind tunnel measurements.

The ethics of big data as a public good: which public? Whose good?

PubMed Central

2016-01-01

International development and humanitarian organizations are increasingly calling for digital data to be treated as a public good because of its value in supplementing scarce national statistics and informing interventions, including in emergencies. In response to this claim, a ‘responsible data’ movement has evolved to discuss guidelines and frameworks that will establish ethical principles for data sharing. However, this movement is not gaining traction with those who hold the highest-value data, particularly mobile network operators who are proving reluctant to make data collected in low- and middle-income countries accessible through intermediaries. This paper evaluates how the argument for ‘data as a public good’ fits with the corporate reality of big data, exploring existing models for data sharing. I draw on the idea of corporate data as an ecosystem involving often conflicting rights, duties and claims, in comparison to the utilitarian claim that data's humanitarian value makes it imperative to share them. I assess the power dynamics implied by the idea of data as a public good, and how differing incentives lead actors to adopt particular ethical positions with regard to the use of data. This article is part of the themed issue ‘The ethical impact of data science’. PMID:28336800

Working memory load modulates the neural response to other's pain: Evidence from an ERP study.

PubMed

Cui, Fang; Zhu, Xiangru; Luo, Yuejia; Cheng, Jiaping

2017-03-22

The present study investigated the time course of processing other's pain under different conditions of working memory (WM) load. Event-related potentials (ERPs) were recorded while the participants held two digits (low WM load) or six digits (high WM load) in WM and viewed pictures that showed others who were in painful or non-painful situations. Robust WM-load×Picture interactions were found for the N2 and LPP components. In the high WM-load condition, painful pictures elicited significantly larger amplitudes than non-painful pictures. In the low WM load condition, the difference between the painful and non-painful pictures was not significant. These ERP results indicate that WM load can influence both the early automatic N2 component and late cognitive LPP component. Compared with high WM load, low WM load reduced affective arousal and emotional sharing in response to other's pain and weakened the cognitive evaluation of task irrelevant stimuli. These findings are explained from the load theory perspective. Copyright © 2017 Elsevier B.V. All rights reserved.

Sharing Data in the Global Ocean Observing System (Invited)

NASA Astrophysics Data System (ADS)

Lindstrom, E. J.; McCurdy, A.; Young, J.; Fischer, A. S.

2010-12-01

We examine the evolution of data sharing in the field of physical oceanography to highlight the challenges now before us. Synoptic global observation of the ocean from space and in situ platforms has significantly matured over the last two decades. In the early 1990’s the community data sharing challenges facing the World Ocean Circulation Experiment (WOCE) largely focused on the behavior of individual scientists. Satellite data sharing depended on the policy of individual agencies. Global data sets were delivered with considerable delay and with enormous personal sacrifice. In the 2000’s the requirements for global data sets and sustained observations from the likes of the U.N. Framework Convention on Climate Change have led to data sharing and cooperation at a grander level. It is more effective and certainly more efficient. The Joint WMO/IOC Technical Commission on Oceanography and Marine Meteorology (JCOMM) provided the means to organize many aspects of data collection and data dissemination globally, for the common good. In response the Committee on Earth Observing Satellites organized Virtual Constellations to enable the assembly and sharing of like kinds of satellite data (e.g., sea surface topography, ocean vector winds, and ocean color). Individuals in physical oceanography have largely adapted to the new rigors of sharing data for the common good, and as a result of this revolution new science has been enabled. Primary obstacles to sharing have shifted from the individual level to the national level. As we enter into the 2010’s the demands for ocean data continue to evolve with an expanded requirement for more real-time reporting and broader disciplinary coverage, to answer key scientific and societal questions. We are also seeing the development of more numerous national contributions to the global observing system. The drivers for the establishment of global ocean observing systems are expanding beyond climate to include biological and biogeochemical issues (e.g. biodiversity and ecosystem services, fisheries collapse, and ocean acidification). This expanded suite of demands and drivers challenge us further to share data for the common good across specialties. This requires that more ocean scientific communities and national ocean observing programs move towards maturity in terms of global data collection capability, sharing capacity, and data management standards. In oceanography the time has arrived for a cultural shift toward more shared collective observing capabilities. Necessarily we must also rapidly move toward harmony in national data sharing policies for the ocean environment. Building capacity to share ocean observations has been an objective for decades and has resulted in an expanded understanding of technologies and management policies that foster data sharing and provenance tracking.

Visual and spatial working memory are not that dissociated after all: a time-based resource-sharing account.

PubMed

Vergauwe, Evie; Barrouillet, Pierre; Camos, Valérie

2009-07-01

Examinations of interference between visual and spatial materials in working memory have suggested domain- and process-based fractionations of visuo-spatial working memory. The present study examined the role of central time-based resource sharing in visuo-spatial working memory and assessed its role in obtained interference patterns. Visual and spatial storage were combined with both visual and spatial on-line processing components in computer-paced working memory span tasks (Experiment 1) and in a selective interference paradigm (Experiment 2). The cognitive load of the processing components was manipulated to investigate its impact on concurrent maintenance for both within-domain and between-domain combinations of processing and storage components. In contrast to both domain- and process-based fractionations of visuo-spatial working memory, the results revealed that recall performance was determined by the cognitive load induced by the processing of items, rather than by the domain to which those items pertained. These findings are interpreted as evidence for a time-based resource-sharing mechanism in visuo-spatial working memory.

47 CFR 27.1188 - Dispute resolution under the Cost-Sharing Plan.

Code of Federal Regulations, 2011 CFR

2011-10-01

... 47 Telecommunication 2 2011-10-01 2011-10-01 false Dispute resolution under the Cost-Sharing Plan. 27.1188 Section 27.1188 Telecommunication FEDERAL COMMUNICATIONS COMMISSION (CONTINUED) COMMON... support to demonstrate that their calculation is reasonable and made in good faith. Specifically, these...

47 CFR 27.1188 - Dispute resolution under the Cost-Sharing Plan.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 47 Telecommunication 2 2010-10-01 2010-10-01 false Dispute resolution under the Cost-Sharing Plan. 27.1188 Section 27.1188 Telecommunication FEDERAL COMMUNICATIONS COMMISSION (CONTINUED) COMMON... support to demonstrate that their calculation is reasonable and made in good faith. Specifically, these...

47 CFR 27.1172 - Dispute Resolution Under the Cost-Sharing Plan.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 47 Telecommunication 2 2010-10-01 2010-10-01 false Dispute Resolution Under the Cost-Sharing Plan. 27.1172 Section 27.1172 Telecommunication FEDERAL COMMUNICATIONS COMMISSION (CONTINUED) COMMON... provide evidentiary support to demonstrate that their calculation is reasonable and made in good faith...

47 CFR 27.1172 - Dispute Resolution Under the Cost-Sharing Plan.

Code of Federal Regulations, 2011 CFR

2011-10-01

... 47 Telecommunication 2 2011-10-01 2011-10-01 false Dispute Resolution Under the Cost-Sharing Plan. 27.1172 Section 27.1172 Telecommunication FEDERAL COMMUNICATIONS COMMISSION (CONTINUED) COMMON... provide evidentiary support to demonstrate that their calculation is reasonable and made in good faith...

Weight and volume variation in truckloads of logs hauled in the central Appalachians

Treesearch

Floyd G. Timson

1974-01-01

Variation in volume and weight was found among loaded log trucks even when such factors as truck type, logging job, and driver influence were eliminated. A load range of 10,000 pounds or 1,000 board feet was commonplace for the same truck, driver, and cutting site. Differences in log size, shape, weight, and species caused a major share of this variation. Yet,...

Design of an Input-Parallel Output-Parallel LLC Resonant DC-DC Converter System for DC Microgrids

NASA Astrophysics Data System (ADS)

Juan, Y. L.; Chen, T. R.; Chang, H. M.; Wei, S. E.

2017-11-01

Compared with the centralized power system, the distributed modularized power system is composed of several power modules with lower power capacity to provide a totally enough power capacity for the load demand. Therefore, the current stress of the power components in each module can then be reduced, and the flexibility of system setup is also enhanced. However, the parallel-connected power modules in the conventional system are usually controlled to equally share the power flow which would result in lower efficiency in low loading condition. In this study, a modular power conversion system for DC micro grid is developed with 48 V dc low voltage input and 380 V dc high voltage output. However, in the developed system control strategy, the numbers of power modules enabled to share the power flow is decided according to the output power at lower load demand. Finally, three 350 W power modules are constructed and parallel-connected to setup a modular power conversion system. From the experimental results, compared with the conventional system, the efficiency of the developed power system in the light loading condition is greatly improved. The modularized design of the power system can also decrease the power loss ratio to the system capacity.

Advanced gearbox technology

NASA Technical Reports Server (NTRS)

Anderson, N. E.; Cedoz, R. W.; Salama, E. E.; Wagner, D. A.

1987-01-01

An advanced 13,000 HP, counterrotating (CR) gearbox was designed and successfully tested to provide a technology base for future designs of geared propfan propulsion systems for both commercial and military aircraft. The advanced technology CR gearbox was designed for high efficiency, low weight, long life, and improved maintainability. The differential planetary CR gearbox features double helical gears, double row cylindrical roller bearings integral with planet gears, tapered roller prop support bearings, and a flexible ring gear and diaphragm to provide load sharing. A new Allison propfan back-to-back gearbox test facility was constructed. Extensive rotating and stationary instrumentation was used to measure temperature, strain, vibration, deflection and efficiency under representative flight operating conditions. The tests verified smooth, efficient gearbox operation. The highly-instrumented advanced CR gearbox was successfully tested to design speed and power (13,000 HP), and to a 115 percent overspeed condition. Measured CR gearbox efficiency was 99.3 percent at the design point based on heat loss to the oil. Tests demonstrated low vibration characteristics of double helical gearing, proper gear tooth load sharing, low stress levels, and the high load capacity of the prop tapered roller bearings. Applied external prop loads did not significantly affect gearbox temperature, vibration, or stress levels. Gearbox hardware was in excellent condition after the tests with no indication of distress.

Centaur Standard Shroud (CSS) static limit load structural tests

NASA Technical Reports Server (NTRS)

Eastwood, C.

1975-01-01

The structural capabilities of the jettisonable metal shroud were tested and the interaction of the shroud with the Centaur stage was evaluated. A flight-configured shroud and the assemblies of the associated Centaur stage were tested for applied axial and shear loads to flight limit values. The tests included various thermal, pressure, and load conditions to verify localized strength capabilities, to evaluate subsystem performance, and to determine the aging effect on insulation system properties. The tests series verified the strength capabilities of the shroud and of all associated flight assembles. Shroud deflections were shown to remain within allowable limits so long as load sharing members were connected between the shroud and the Centaur stage.

Control of thumb force using surface functional electrical stimulation and muscle load sharing

PubMed Central

2013-01-01

Background Stroke survivors often have difficulties in manipulating objects with their affected hand. Thumb control plays an important role in object manipulation. Surface functional electrical stimulation (FES) can assist movement. We aim to control the 2D thumb force by predicting the sum of individual muscle forces, described by a sigmoidal muscle recruitment curve and a single force direction. Methods Five able bodied subjects and five stroke subjects were strapped in a custom built setup. The forces perpendicular to the thumb in response to FES applied to three thumb muscles were measured. We evaluated the feasibility of using recruitment curve based force vector maps in predicting output forces. In addition, we developed a closed loop force controller. Load sharing between the three muscles was used to solve the redundancy problem having three actuators to control forces in two dimensions. The thumb force was controlled towards target forces of 0.5 N and 1.0 N in multiple directions within the individual’s thumb work space. Hereby, the possibilities to use these force vector maps and the load sharing approach in feed forward and feedback force control were explored. Results The force vector prediction of the obtained model had small RMS errors with respect to the actual measured force vectors (0.22±0.17 N for the healthy subjects; 0.17±0.13 N for the stroke subjects). The stroke subjects showed a limited work range due to limited force production of the individual muscles. Performance of feed forward control without feedback, was better in healthy subjects than in stroke subjects. However, when feedback control was added performances were similar between the two groups. Feedback force control lead, especially for the stroke subjects, to a reduction in stationary errors, which improved performance. Conclusions Thumb muscle responses to FES can be described by a single force direction and a sigmoidal recruitment curve. Force in desired direction can be generated through load sharing among redundant muscles. The force vector maps are subject specific and also suitable in feedforward and feedback control taking the individual’s available workspace into account. With feedback, more accurate control of muscle force can be achieved. PMID:24103414

Optimization of Single-Sided Charge-Sharing Strip Detectors

NASA Technical Reports Server (NTRS)

Hamel, L.A.; Benoit, M.; Donmez, B.; Macri, J. R.; McConnell, M. L.; Ryan, J. M.; Narita, T.

2006-01-01

Simulation of the charge sharing properties of single-sided CZT strip detectors with small anode pads are presented. The effect of initial event size, carrier repulsion, diffusion, drift, trapping and detrapping are considered. These simulations indicate that such a detector with a 150 m pitch will provide good charge sharing between neighboring pads. This is supported by a comparison of simulations and measurements for a similar detector with a coarser pitch of 225 m that could not provide sufficient sharing. The performance of such a detector used as a gamma-ray imager is discussed.

Data management strategies for multinational large-scale systems biology projects.

PubMed

Wruck, Wasco; Peuker, Martin; Regenbrecht, Christian R A

2014-01-01

Good accessibility of publicly funded research data is essential to secure an open scientific system and eventually becomes mandatory [Wellcome Trust will Penalise Scientists Who Don't Embrace Open Access. The Guardian 2012]. By the use of high-throughput methods in many research areas from physics to systems biology, large data collections are increasingly important as raw material for research. Here, we present strategies worked out by international and national institutions targeting open access to publicly funded research data via incentives or obligations to share data. Funding organizations such as the British Wellcome Trust therefore have developed data sharing policies and request commitment to data management and sharing in grant applications. Increased citation rates are a profound argument for sharing publication data. Pre-publication sharing might be rewarded by a data citation credit system via digital object identifiers (DOIs) which have initially been in use for data objects. Besides policies and incentives, good practice in data management is indispensable. However, appropriate systems for data management of large-scale projects for example in systems biology are hard to find. Here, we give an overview of a selection of open-source data management systems proved to be employed successfully in large-scale projects.

Data management strategies for multinational large-scale systems biology projects

PubMed Central

Peuker, Martin; Regenbrecht, Christian R.A.

2014-01-01

Good accessibility of publicly funded research data is essential to secure an open scientific system and eventually becomes mandatory [Wellcome Trust will Penalise Scientists Who Don’t Embrace Open Access. The Guardian 2012]. By the use of high-throughput methods in many research areas from physics to systems biology, large data collections are increasingly important as raw material for research. Here, we present strategies worked out by international and national institutions targeting open access to publicly funded research data via incentives or obligations to share data. Funding organizations such as the British Wellcome Trust therefore have developed data sharing policies and request commitment to data management and sharing in grant applications. Increased citation rates are a profound argument for sharing publication data. Pre-publication sharing might be rewarded by a data citation credit system via digital object identifiers (DOIs) which have initially been in use for data objects. Besides policies and incentives, good practice in data management is indispensable. However, appropriate systems for data management of large-scale projects for example in systems biology are hard to find. Here, we give an overview of a selection of open-source data management systems proved to be employed successfully in large-scale projects. PMID:23047157

Sharing our stories.

PubMed

Thieman, Leann

2008-06-01

HOW MANY TIMES over the years have nurses exclaimed, "I could write a book!"? Well now, together, we have. Nurses from all over the world contributed their stories to Chicken Soup for the Nurse's Soul and the recently released Chicken Soup for the Nurse's Soul, Second Dose. In this new department, I'll share some of these stories with you-real anecdotes about the challenges and joys of being a nurse.Forever, nurses have been sharing their stories at bedsides, break rooms, and nurses' stations to inspire and uphold each other. Stories from students help us recall why we entered this profession in the first place. Stories from seasoned nurses reveal why we stay. Some stories reflect on the "good old days"-many of which didn't seem all that good at the time! But all of them give us hope.

Creating "Visual Legacies": Infographics as a Means of Interpreting and Sharing Research

ERIC Educational Resources Information Center

Thompson, Charee M.

2015-01-01

Guided by the principle "good data presentation is timeless," (Cressey, 2014, p.305), this unit project challenges students to engage an alternative means of sharing communication research and to realize the potential for their presentations to become "visual legacies" through the creation of infographics. Students encounter…

Cost-Benefit Analysis of Implementing a Car-Sharing Model to the Navy’s Passenger Vehicle Fleet

DTIC Science & Technology

2016-12-01

and Public Policy iv THIS PAGE INTENTIONALLY LEFT BLANK v COST - BENEFIT ANALYSIS OF IMPLEMENTING A CAR- SHARING MODEL TO THE NAVY’S PASSENGER...the public good. This CBA will be conducted using a federal government perspective and standing (whose costs and benefits will be counted) will be...NAVAL POSTGRADUATE SCHOOL MONTEREY, CALIFORNIA MBA PROFESSIONAL REPORT COST - BENEFIT ANALYSIS OF IMPLEMENTING A CAR-SHARING

Voices of Women in the Field: Laundry and Leadership--A New Dance

ERIC Educational Resources Information Center

Curley, Ginny

2007-01-01

In this article, the author shares a story of a young couple who was arguing about the proper way to fold towels. The husband shared a story of how he had wanted to do something nice for his wife, who was studying. So he folded a load of towels and put them away. His wife then refolded the towels, explaining that he had folded them in half and…

Time-dependent fiber bundles with local load sharing. II. General Weibull fibers.

PubMed

Phoenix, S Leigh; Newman, William I

2009-12-01

Fiber bundle models (FBMs) are useful tools in understanding failure processes in a variety of material systems. While the fibers and load sharing assumptions are easily described, FBM analysis is typically difficult. Monte Carlo methods are also hampered by the severe computational demands of large bundle sizes, which overwhelm just as behavior relevant to real materials starts to emerge. For large size scales, interest continues in idealized FBMs that assume either equal load sharing (ELS) or local load sharing (LLS) among fibers, rules that reflect features of real load redistribution in elastic lattices. The present work focuses on a one-dimensional bundle of N fibers under LLS where life consumption in a fiber follows a power law in its load, with exponent rho , and integrated over time. This life consumption function is further embodied in a functional form resulting in a Weibull distribution for lifetime under constant fiber stress and with Weibull exponent, beta. Thus the failure rate of a fiber depends on its past load history, except for beta=1 . We develop asymptotic results validated by Monte Carlo simulation using a computational algorithm developed in our previous work [Phys. Rev. E 63, 021507 (2001)] that greatly increases the size, N , of treatable bundles (e.g., 10(6) fibers in 10(3) realizations). In particular, our algorithm is O(N ln N) in contrast with former algorithms which were O(N2) making this investigation possible. Regimes are found for (beta,rho) pairs that yield contrasting behavior for large N. For rho>1 and large N, brittle weakest volume behavior emerges in terms of characteristic elements (groupings of fibers) derived from critical cluster formation, and the lifetime eventually goes to zero as N-->infinity , unlike ELS, which yields a finite limiting mean. For 1/21 but with 0

Time-dependent fiber bundles with local load sharing. II. General Weibull fibers

NASA Astrophysics Data System (ADS)

Phoenix, S. Leigh; Newman, William I.

2009-12-01

Fiber bundle models (FBMs) are useful tools in understanding failure processes in a variety of material systems. While the fibers and load sharing assumptions are easily described, FBM analysis is typically difficult. Monte Carlo methods are also hampered by the severe computational demands of large bundle sizes, which overwhelm just as behavior relevant to real materials starts to emerge. For large size scales, interest continues in idealized FBMs that assume either equal load sharing (ELS) or local load sharing (LLS) among fibers, rules that reflect features of real load redistribution in elastic lattices. The present work focuses on a one-dimensional bundle of N fibers under LLS where life consumption in a fiber follows a power law in its load, with exponent ρ , and integrated over time. This life consumption function is further embodied in a functional form resulting in a Weibull distribution for lifetime under constant fiber stress and with Weibull exponent, β . Thus the failure rate of a fiber depends on its past load history, except for β=1 . We develop asymptotic results validated by Monte Carlo simulation using a computational algorithm developed in our previous work [Phys. Rev. EPLEEE81063-651X 63, 021507 (2001)] that greatly increases the size, N , of treatable bundles (e.g., 106 fibers in 103 realizations). In particular, our algorithm is O(NlnN) in contrast with former algorithms which were O(N2) making this investigation possible. Regimes are found for (β,ρ) pairs that yield contrasting behavior for large N . For ρ>1 and large N , brittle weakest volume behavior emerges in terms of characteristic elements (groupings of fibers) derived from critical cluster formation, and the lifetime eventually goes to zero as N→∞ , unlike ELS, which yields a finite limiting mean. For 1/2≤ρ≤1 , however, LLS has remarkably similar behavior to ELS (appearing to be virtually identical for ρ=1 ) with an asymptotic Gaussian lifetime distribution and a finite limiting mean for large N . The coefficient of variation follows a power law in increasing N but, except for ρ=1 , the value of the negative exponent is clearly less than 1/2 unlike in ELS bundles where the exponent remains 1/2 for 1/2<ρ≤1 . For sufficiently small values 0<ρ≪1 , a transition occurs, depending on β , whereby LLS bundle lifetimes become dominated by a few long-lived fibers. Thus the bundle lifetime appears to approximately follow an extreme-value distribution for the longest lived of a parallel group of independent elements, which applies exactly to ρ=0 . The lower the value of β , the higher the transition value of ρ , below which such extreme-value behavior occurs. No evidence was found for limiting Gaussian behavior for ρ>1 but with 0<β(ρ+1)<1 , as might be conjectured from quasistatic bundle models where β(ρ+1) mimics the Weibull exponent for fiber strength.

Design Evaluation of Wind Turbine Spline Couplings Using an Analytical Model: Preprint

DOE Office of Scientific and Technical Information (OSTI.GOV)

Guo, Y.; Keller, J.; Wallen, R.

2015-02-01

Articulated splines are commonly used in the planetary stage of wind turbine gearboxes for transmitting the driving torque and improving load sharing. Direct measurement of spline loads and performance is extremely challenging because of limited accessibility. This paper presents an analytical model for the analysis of articulated spline coupling designs. For a given torque and shaft misalignment, this analytical model quickly yields insights into relationships between the spline design parameters and resulting loads; bending, contact, and shear stresses; and safety factors considering various heat treatment methods. Comparisons of this analytical model against previously published computational approaches are also presented.

Why Are Drugs So Hard to Quit?

MedlinePlus

... Loading... Close Yeah, keep it Undo Close This video is unavailable. Watch Queue Queue Watch Queue Queue ... in Share More Report Need to report the video? Sign in to report inappropriate content. Sign in ...

Prediction-based dynamic load-sharing heuristics

NASA Technical Reports Server (NTRS)

Goswami, Kumar K.; Devarakonda, Murthy; Iyer, Ravishankar K.

1993-01-01

The authors present dynamic load-sharing heuristics that use predicted resource requirements of processes to manage workloads in a distributed system. A previously developed statistical pattern-recognition method is employed for resource prediction. While nonprediction-based heuristics depend on a rapidly changing system status, the new heuristics depend on slowly changing program resource usage patterns. Furthermore, prediction-based heuristics can be more effective since they use future requirements rather than just the current system state. Four prediction-based heuristics, two centralized and two distributed, are presented. Using trace driven simulations, they are compared against random scheduling and two effective nonprediction based heuristics. Results show that the prediction-based centralized heuristics achieve up to 30 percent better response times than the nonprediction centralized heuristic, and that the prediction-based distributed heuristics achieve up to 50 percent improvements relative to their nonprediction counterpart.

Flight Testing of the Capillary Pumped Loop 3 Experiment

NASA Technical Reports Server (NTRS)

Ottenstein, Laura; Butler, Dan; Ku, Jentung; Cheung, Kwok; Baldauff, Robert; Hoang, Triem

2002-01-01

The Capillary Pumped Loop 3 (CAPL 3) experiment was a multiple evaporator capillary pumped loop experiment that flew in the Space Shuttle payload bay in December 2001 (STS-108). The main objective of CAPL 3 was to demonstrate in micro-gravity a multiple evaporator capillary pumped loop system, capable of reliable start-up, reliable continuous operation, and heat load sharing, with hardware for a deployable radiator. Tests performed on orbit included start-ups, power cycles, low power tests (100 W total), high power tests (up to 1447 W total), heat load sharing, variable/fixed conductance transition tests, and saturation temperature change tests. The majority of the tests were completed successfully, although the experiment did exhibit an unexpected sensitivity to shuttle maneuvers. This paper describes the experiment, the tests performed during the mission, and the test results.

A Review of Distributed Control Techniques for Power Quality Improvement in Micro-grids

NASA Astrophysics Data System (ADS)

Zeeshan, Hafiz Muhammad Ali; Nisar, Fatima; Hassan, Ahmad

2017-05-01

Micro-grid is typically visualized as a small scale local power supply network dependent on distributed energy resources (DERs) that can operate simultaneously with grid as well as in standalone manner. The distributed generator of a micro-grid system is usually a converter-inverter type topology acting as a non-linear load, and injecting harmonics into the distribution feeder. Hence, the negative effects on power quality by the usage of distributed generation sources and components are clearly witnessed. In this paper, a review of distributed control approaches for power quality improvement is presented which encompasses harmonic compensation, loss mitigation and optimum power sharing in multi-source-load distributed power network. The decentralized subsystems for harmonic compensation and active-reactive power sharing accuracy have been analysed in detail. Results have been validated to be consistent with IEEE standards.

Audition and vision share spatial attentional resources, yet attentional load does not disrupt audiovisual integration.

PubMed

Wahn, Basil; König, Peter

2015-01-01

Humans continuously receive and integrate information from several sensory modalities. However, attentional resources limit the amount of information that can be processed. It is not yet clear how attentional resources and multisensory processing are interrelated. Specifically, the following questions arise: (1) Are there distinct spatial attentional resources for each sensory modality? and (2) Does attentional load affect multisensory integration? We investigated these questions using a dual task paradigm: participants performed two spatial tasks (a multiple object tracking task and a localization task), either separately (single task condition) or simultaneously (dual task condition). In the multiple object tracking task, participants visually tracked a small subset of several randomly moving objects. In the localization task, participants received either visual, auditory, or redundant visual and auditory location cues. In the dual task condition, we found a substantial decrease in participants' performance relative to the results of the single task condition. Importantly, participants performed equally well in the dual task condition regardless of the location cues' modality. This result suggests that having spatial information coming from different modalities does not facilitate performance, thereby indicating shared spatial attentional resources for the auditory and visual modality. Furthermore, we found that participants integrated redundant multisensory information similarly even when they experienced additional attentional load in the dual task condition. Overall, findings suggest that (1) visual and auditory spatial attentional resources are shared and that (2) audiovisual integration of spatial information occurs in an pre-attentive processing stage.

NREL's Work for the U.S. Navy Illuminates Energy and Cost Savings | News

Science.gov Websites

load controls and whole-building energy efficiency retrofits as good investments for the Navy. " Program Director Steve Gorin said. Advanced power strips, a plug load control technology that cuts power and an office building with capacity for roughly 100 staff. While plug load savings depend on what can

Design Methodology for Bonded-Bolted Composite Joints. Volume I. Analysis Derivations and Illustrative Solutions

DTIC Science & Technology

1982-02-01

EXPERIMENTAL EVIDENCE ...... ....... ....... ....... ... 27 2.6 LOAD REDISTRIBUTION DUE TO DISBONDS IN ADHESIVE IN STEPPED-LAP JOINTS...SINGLE FASTENER " . ;39 3.4 LOAD SHARING BETWEEN MULTIRUW FASTENERS.."."..-.."." ൴ 3.5 FAILURE CRITERIA AT FASTENER HOLES . . ... 3.6 EXPERIMENTAL ...PLASTIC C. PERFECTLY ELASTIC THROUGHOUT A. ULL PLSTC SEAR TRS•WITHOUT $1IGN REVERSAL WITHOUT S:IG13 REVERSAL IOR FULLY NEGATIVE QUIVALENT ) (OR FULLY

Hydrostatic Bearing Pad Maximum Load and Overturning Conditions for the 70-meter Antenna

NASA Technical Reports Server (NTRS)

Mcginness, H. D.

1985-01-01

The reflector diameters of the 64-m antennas were increased to 70-m. In order to evaluate the minimum film thickness of the hydrostatic bearing which supports the antenna weight, it is first necessary to have a good estimation of the maximum operational load on the most heavily loaded bearing pad. The maximum hydrostatic bearing load is shown to be sufficiently small and the ratios of stabilizing to over turning moments are ample.

Sharing Good Practices: Teenage Girls, Sport, and Physical Activities.

ERIC Educational Resources Information Center

Vescio, Johanna A.; Crosswhite, Janice J.

2002-01-01

Investigated initiatives to increase teenage girls' participation in sport and physical activities, examining good practice case studies from Australia. Surveys of national, state, and regional sporting organizations and various community and school organizations (including culturally diverse girls and girls with disabilities) highlighted three…

Work injuries among drivers in the goods-transport branch in Denmark.

PubMed

Shibuya, Hitomi; Cleal, Bryan; Mikkelsen, Kim Lyngby

2008-05-01

Goods-transport drivers in Denmark had an elevated rate of hospital contact due to injury compared with the skilled/semiskilled workforce in general in recent years. There is a need to elucidate the causes of their work injuries. We analyzed the Danish National Work Injury Register for the 10-year period 1993-2002. The vast majority (92.6%) of the work injuries among goods-transport were sustained under non-traffic activities, that is, collecting, loading, unloading, and delivering goods. They fell from height (22.3%), suffered from overexertion (14.2%), got caught between/under objects (12.6%), collided with objects (12.0%), slipped/tripped (10.6%), or got struck by falling objects (9.0%). There is a clear need for efforts to prevent work injuries under non-traffic activities among goods-transport drivers in Denmark. For this end, it is necessary to involve not only the drivers' employers for reinforcement of safety procedures, but also the employers' customers for improvement of the physical environment, in which drivers collect, load, unload, and deliver goods. (c) 2008 Wiley-Liss, Inc.

Direct access inter-process shared memory

DOEpatents

Brightwell, Ronald B; Pedretti, Kevin; Hudson, Trammell B

2013-10-22

A technique for directly sharing physical memory between processes executing on processor cores is described. The technique includes loading a plurality of processes into the physical memory for execution on a corresponding plurality of processor cores sharing the physical memory. An address space is mapped to each of the processes by populating a first entry in a top level virtual address table for each of the processes. The address space of each of the processes is cross-mapped into each of the processes by populating one or more subsequent entries of the top level virtual address table with the first entry in the top level virtual address table from other processes.

Sharing Scarce Resources: Group-Outcome Orientation, External Disaster, and Stealing in a Simulated Commons.

ERIC Educational Resources Information Center

Edney, Julian J.; Bell, Paul A.

1984-01-01

Conducted two studies in which subjects (N=216) faced the dilemma of how to harvest resources from a shared pool when faced with external catastrophies and given opportunities to steal. Results showed that tying the individual's outcome to the rest of the group is good for the group. (LLL)

47 CFR 27.1166 - Reimbursement under the Cost-Sharing Plan.

Code of Federal Regulations, 2010 CFR

2010-10-01

... frequency band may seek full reimbursement through the clearinghouse of compensable costs, up to the... act in good faith in satisfying the cost-sharing obligations under §§ 27.1160 through 27.1174. The... interference from MSS space-to-Earth downlink operations, but may elect to do so, in which case the MSS...

47 CFR 27.1166 - Reimbursement under the Cost-Sharing Plan.

Code of Federal Regulations, 2011 CFR

2011-10-01

... frequency band may seek full reimbursement through the clearinghouse of compensable costs, up to the... act in good faith in satisfying the cost-sharing obligations under §§ 27.1160 through 27.1174. The... interference from MSS space-to-Earth downlink operations, but may elect to do so, in which case the MSS...

47 CFR 27.1166 - Reimbursement under the Cost-Sharing Plan.

Code of Federal Regulations, 2012 CFR

2012-10-01

... frequency band may seek full reimbursement through the clearinghouse of compensable costs, up to the... act in good faith in satisfying the cost-sharing obligations under §§ 27.1160 through 27.1174. The... interference from MSS space-to-Earth downlink operations, but may elect to do so, in which case the MSS...

Load partitioning between the bcc-iron matrix and NiAl-type precipitates in a ferritic alloy on multiple length scales

PubMed Central

Sun, Zhiqian; Song, Gian; Sisneros, Thomas A.; Clausen, Bjørn; Pu, Chao; Li, Lin; Gao, Yanfei; Liaw, Peter K.

2016-01-01

An understanding of load sharing among constituent phases aids in designing mechanical properties of multiphase materials. Here we investigate load partitioning between the body-centered-cubic iron matrix and NiAl-type precipitates in a ferritic alloy during uniaxial tensile tests at 364 and 506 °C on multiple length scales by in situ neutron diffraction and crystal plasticity finite element modeling. Our findings show that the macroscopic load-transfer efficiency is not as high as that predicted by the Eshelby model; moreover, it depends on the matrix strain-hardening behavior. We explain the grain-level anisotropic load-partitioning behavior by considering the plastic anisotropy of the matrix and elastic anisotropy of precipitates. We further demonstrate that the partitioned load on NiAl-type precipitates relaxes at 506 °C, most likely through thermally-activated dislocation rearrangement on the microscopic scale. The study contributes to further understanding of load-partitioning characteristics in multiphase materials. PMID:26979660

Load partitioning between the bcc-iron matrix and NiAl-type precipitates in a ferritic alloy on multiple length scales

DOE PAGES

Sun, Zhiqian; Song, Gian; Sisneros, Thomas A.; ...

2016-03-16

An understanding of load sharing among constituent phases aids in designing mechanical properties of multiphase materials. Here we investigate load partitioning between the body-centered-cubic iron matrix and NiAl-type precipitates in a ferritic alloy during uniaxial tensile tests at 364 and 506 C on multiple length scales by in situ neutron diffraction and crystal plasticity finite element modeling. Our findings show that the macroscopic load-transfer efficiency is not as high as that predicted by the Eshelby model; moreover, it depends on the matrix strain-hardening behavior. We explain the grain-level anisotropic load-partitioning behavior by considering the plastic anisotropy of the matrix andmore » elastic anisotropy of precipitates. We further demonstrate that the partitioned load on NiAl-type precipitates relaxes at 506 C, most likely through thermally-activated dislocation rearrangement on the microscopic scale. Furthermore, the study contributes to further understanding of load-partitioning characteristics in multiphase materials.« less

Modified APEX model for Simulating Macropore Phosphorus Contributions to Tile Drains.

PubMed

Ford, William I; King, Kevin W; Williams, Mark R; Confesor, Remegio B

2017-11-01

The contribution of macropore flow to phosphorus (P) loadings in tile-drained agricultural landscapes remains poorly understood at the field scale, despite the recognized deleterious impacts of contaminant transport via macropore pathways. A new subroutine that couples existing matrix-excess and matrix-desiccation macropore flow theory and a modified P routine is implemented in the Agricultural Policy Environmental eXtender (APEX) model. The original and modified formulation were applied and evaluated for a case study in a poorly drained field in Western Ohio with 31 months of surface and subsurface monitoring data. Results highlighted that a macropore subroutine in APEX improved edge-of-field discharge calibration and validation for both tile and total discharge from satisfactory and good, respectively, to very good and improved dissolved reactive P load calibration and validation statistics for tile P loads from unsatisfactory to very good. Output from the calibrated macropore simulations suggested median annual matrix-desiccation macropore flow contributions of 48% and P load contributions of 43%, with the majority of loading occurring in winter and spring. While somewhat counterintuitive, the prominence of matrix-desiccation macropore flow during seasons with less cracking reflects the importance of coupled development of macropore pathways and adequate supply of the macropore flow source. The innovative features of the model allow for assessments of annual macropore P contributions to tile drainage and has the potential to inform P site assessment tools. Copyright © by the American Society of Agronomy, Crop Science Society of America, and Soil Science Society of America, Inc.

Sharing health information online in South Korea: motives, topics, and antecedents.

PubMed

Kye, S Y; Shim, M; Kim, Y C; Park, K

2017-10-11

This study aimed to examine the motives, topics and antecedents for sharing health information online among Korean Internet users. Eight hundred adults completed a web-based survey exploring the motives; topics; physical, cognitive, affective and environmental factors; and experiences relating to sharing health information online. The motives for not sharing information included information absence and inappropriateness. The most preferred topic was disease. Good subjective health was significantly associated with frequent information sharing while individuals with a history of disease involving themselves or family members were more likely to share health information than were those without such a history. Further, a higher level of depressed mood was related to a higher level of sharing. Internet-related self-efficacy and trust in information delivery channels were positively related to sharing. Future research could extend the factors related to information sharing to include the evaluation of shared information. © The Author 2017. Published by Oxford University Press. All rights reserved. For Permissions, please email: journals.permissions@oup.com.

Development of good modelling practice for phsiologically based pharmacokinetic models for use in risk assessment: The first steps

EPA Science Inventory

The increasing use of tissue dosimetry estimated using pharmacokinetic models in chemical risk assessments in multiple countries necessitates the need to develop internationally recognized good modelling practices. These practices would facilitate sharing of models and model eva...

Good-Neighbor Policy

ERIC Educational Resources Information Center

Drozdowski, Mark J.

2007-01-01

In this article, the author draws on his experience as the director of the Fitchburg State College Foundation in Fitchburg, Massachusetts, to make a distinction between being a good neighbor to local non-profit organizations by sharing strategies and information, and creating conflicts of interest when both the college and its neighbor…

Long Duration Exposure Facility (LDEF) structural verification test report

NASA Technical Reports Server (NTRS)

Jones, T. C.; Lucy, M. H.; Shearer, R. L.

1983-01-01

Structural load tests on the Long Duration Exposure Facility's (LDEF) primary structure were conducted. These tests had three purposes: (1) demonstrate structural adequacy of the assembled LDEF primary structure when subjected to anticipated flight loads; (2) verify analytical models and methods used in loads and stress analysis; and (3) perform tests to comply with the Space Transportation System (STS) requirements. Test loads were based on predicted limit loads which consider all flight events. Good agreement is shown between predicted and observed load, strain, and deflection data. Test data show that the LDEF structure was subjected to 1.2 times limit load to meet the STS requirements. The structural adequacy of the LDEF is demonstrated.

Development of regenerated cellulose/halloysites nanocomposites via ionic liquids.

PubMed

Hanid, Nurbaiti Abdul; Wahit, Mat Uzir; Guo, Qipeng; Mahmoodian, Shaya; Soheilmoghaddam, Mohammad

2014-01-01

In this study, regenerated cellulose/halloysites (RC/HNT) nanocomposites with different nanofillers loading were fabricated by dissolving the cellulose in 1-ethyl-3-methylimidazolium chloride (EMIMCl) ionic liquid. The films were prepared via solution casting method and were characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM) and transmission electron microscopy (TEM). The mechanical properties were investigated by tensile testing. It clearly displayed a good enhancement of both tensile strength and Young's modulus with HNT loading up to 5 wt%. As the HNT loadings increased to 5 wt%, the thermal behaviour and water resistance rate was also increased. The TEM and SEM images also depicted even dispersion of the HNT and a good intertubular interaction between the HNT and the cellulose matrix. Copyright © 2013 Elsevier Ltd. All rights reserved.

Ground reaction forces on stairs. Part II: knee implant patients versus normals.

PubMed

Stacoff, Alex; Kramers-de Quervain, Inès A; Luder, Gerhard; List, Renate; Stüssi, Edgar

2007-06-01

The goal of this study was to compare selected parameters of vertical ground reaction forces (GRF) of good outcome patients with different prosthesis designs with a matched control group during level walking, stair ascent and descent. Forty subjects, 29 with three main implant designs (including four subjects with a passive knee flexion restriction), and 11 healthy controls were measured with 8-10 repetitions. Vertical ground reaction forces were measured during two consecutive steps with force plates embedded in the walkway and the staircase. Defined parameters of the force signals were used to compare the results of the test groups. The results show, that, postoperatively, good outcome patients produce gait patterns of the vertical ground reaction force which are comparable to normal healthy subjects with the exception of a few distinct differences: a significant reduction (p<0.05) in the vertical loading on the operated side during level walking at take-off, at weight acceptance and take-off during stair ascent of the normal stair. During stair descent, the patients did not reduce load on the operated side, but increased load variation and side-to-side asymmetry; thus, the mechanical loads on the implants were high, which may be important information with respect to loading protocols of knee implant simulators. No systematic differences in any of the test parameters were found between posterior cruciate-retaining (LCS MB and Innex CR) versus non-retaining (LCS RP and Innex UCOR) implant designs. The restricted group showed significant reductions (p<0.05) of several loading parameters as well as an increased side-to-side asymmetry. About one third of the force parameters of the good outcome patients showed a side-to-side asymmetry between two consecutive steps, which was over a proposed level of acceptance.

Mobile User Objective System (MUOS) Multi-Service Operational Test and Evaluation-2 Report (with Classified Annex)

DTIC Science & Technology

2016-06-01

an effective system monitoring and display capability. The SOM, C-SSE, and resource managers access MUOS via a web portal called the MUOS Planning...and Provisioning Application (PlanProvApp). This web portal is their window into MUOS and is designed to provide them with a shared understanding of...including page loading errors, partially loaded web pages, incomplete reports, and inaccurate reports. For example, MUOS reported that there were

FEMCAM Analysis of SULTAN Test Results for ITER Nb3SN Cable-conduit Conductors

DOE Office of Scientific and Technical Information (OSTI.GOV)

Yuhu Zhai, Pierluigi Bruzzone, Ciro Calzolaio

2013-03-19

Performance degradation due to filament fracture of Nb3 Sn cable-in-conduit conductors (CICCs) is a critical issue in large-scale magnet designs such as ITER which is currently being constructed in the South of France. The critical current observed in most SULTAN TF CICC samples is significantly lower than expected and the voltage-current characteristic is seen to have a much broader transition from a single strand to the CICC. Moreover, most conductors exhibit the irreversible degradation due to filament fracture and strain relaxation under electromagnetic cyclic loading. With recent success in monitoring thermal strain distribution and its evolution under the electromagnetic cyclicmore » loading from in situ measurement of critical temperature, we apply FEMCAM which includes strand filament breakage and local current sharing effects to SULTAN tested CICCs to study Nb3 Sn strain sensitivity and irreversible performance degradation. FEMCAM combines the thermal bending effect during cool down and the EM bending effect due to locally accumulating Lorentz force during magnet operation. It also includes strand filament fracture and related local current sharing for the calculation of cable n value. In this paper, we model continuous performance degradation under EM cyclic loading based on strain relaxation and the transition broadening upon cyclic loading to the extreme cases seen in SULTAN test data to better quantify conductor performance degradation.« less

The Research Data Alliance

NASA Astrophysics Data System (ADS)

Fontaine, K. S.

2015-12-01

The Research Data Alliance (RDA) is an international organization created in 2012 to provide researchers with a forum for identifying and removing barriers to data sharing. Since then, RDA has gained over 3000 individual members, over three dozen organizational members, 47 Interest Groups, and 17 Working Groups, all focused on research data sharing. Interoperability is one instantiation of data sharing, but is not the only barrier to overcome. Technology limitations, discipline-specific cultures that do not support sharing, lack of best-practices, or lack of good definitions, are only three of a long list of situations preventing researchers from sharing their data. This presentation will cover how RDA has grown, some details on how the first eight solutions contribute to interoperability and sharing, and a sneak peek at what's in the pipeline.

Fracture control method for composite tanks with load sharing liners

NASA Technical Reports Server (NTRS)

Bixler, W. D.

1975-01-01

The experimental program was based on the premise that the plastic sizing cycle, which each pressure vessel is subjected to prior to operation, acts as an effective proof test of the liner, screening out all flaws or cracks larger than a critical size. In doing so, flaw growth potential is available for cyclic operation at pressures less than the sizing pressure. Static fracture and cyclic life tests, involving laboratory type specimens and filament overwrapped tanks, were conducted on three liner materials: (1) 2219-T62 aluminum, (2) Inconel X750 STA, and (3) cryoformed 301 stainless steel. Variables included material condition, thickness, flaw size, flaw shape, temperature, sizing stress level, operating stress level and minimum-to-maximum operating stress ratio. From the empirical data base obtained, a procedure was established by which the service life of composite tanks with load sharing liners could be guaranteed with a high degree of confidence.

Tug of war of molecular motors: the effects of uneven load sharing

NASA Astrophysics Data System (ADS)

Bouzat, Sebastián; Falo, Fernando

2011-12-01

We analyze theoretically the problem of cargo transport along microtubules by motors of two species with opposite polarities. We consider two different one-dimensional models previously developed in the literature: a quite widespread model which assumes equal force sharing, here referred to as the mean field model (MFM), and a stochastic model (SM) which considers individual motor-cargo links. We find that in generic situations, the MFM predicts larger cargo mean velocity, smaller mean run time and less frequent reversions than the SM. These phenomena are found to be the consequences of the load sharing assumptions and can be interpreted in terms of the probabilities of the different motility states. We also explore the influence of the viscosity in both models and the role of the stiffness of the motor-cargo links within the SM. Our results show that the mean cargo velocity is independent of the stiffness, while the mean run time decreases with such a parameter. We explore the case of symmetric forward and backward motors considering kinesin-1 parameters, and the problem of transport by kinesin-1 and cytoplasmic dyneins considering two different sets of parameters previously proposed for dyneins.

Method for prefetching non-contiguous data structures

DOEpatents

Blumrich, Matthias A [Ridgefield, CT; Chen, Dong [Croton On Hudson, NY; Coteus, Paul W [Yorktown Heights, NY; Gara, Alan G [Mount Kisco, NY; Giampapa, Mark E [Irvington, NY; Heidelberger, Philip [Cortlandt Manor, NY; Hoenicke, Dirk [Ossining, NY; Ohmacht, Martin [Brewster, NY; Steinmacher-Burow, Burkhard D [Mount Kisco, NY; Takken, Todd E [Mount Kisco, NY; Vranas, Pavlos M [Bedford Hills, NY

2009-05-05

A low latency memory system access is provided in association with a weakly-ordered multiprocessor system. Each processor in the multiprocessor shares resources, and each shared resource has an associated lock within a locking device that provides support for synchronization between the multiple processors in the multiprocessor and the orderly sharing of the resources. A processor only has permission to access a resource when it owns the lock associated with that resource, and an attempt by a processor to own a lock requires only a single load operation, rather than a traditional atomic load followed by store, such that the processor only performs a read operation and the hardware locking device performs a subsequent write operation rather than the processor. A simple perfecting for non-contiguous data structures is also disclosed. A memory line is redefined so that in addition to the normal physical memory data, every line includes a pointer that is large enough to point to any other line in the memory, wherein the pointers to determine which memory line to prefect rather than some other predictive algorithm. This enables hardware to effectively prefect memory access patterns that are non-contiguous, but repetitive.

Low latency memory access and synchronization

DOE Office of Scientific and Technical Information (OSTI.GOV)

Blumrich, Matthias A.; Chen, Dong; Coteus, Paul W.

A low latency memory system access is provided in association with a weakly-ordered multiprocessor system. Each processor in the multiprocessor shares resources, and each shared resource has an associated lock within a locking device that provides support for synchronization between the multiple processors in the multiprocessor and the orderly sharing of the resources. A processor only has permission to access a resource when it owns the lock associated with that resource, and an attempt by a processor to own a lock requires only a single load operation, rather than a traditional atomic load followed by store, such that the processormore » only performs a read operation and the hardware locking device performs a subsequent write operation rather than the processor. A simple prefetching for non-contiguous data structures is also disclosed. A memory line is redefined so that in addition to the normal physical memory data, every line includes a pointer that is large enough to point to any other line in the memory, wherein the pointers to determine which memory line to prefetch rather than some other predictive algorithm. This enables hardware to effectively prefetch memory access patterns that are non-contiguous, but repetitive.« less

Low latency memory access and synchronization

DOE Office of Scientific and Technical Information (OSTI.GOV)

Blumrich, Matthias A.; Chen, Dong; Coteus, Paul W.

A low latency memory system access is provided in association with a weakly-ordered multiprocessor system. Bach processor in the multiprocessor shares resources, and each shared resource has an associated lock within a locking device that provides support for synchronization between the multiple processors in the multiprocessor and the orderly sharing of the resources. A processor only has permission to access a resource when it owns the lock associated with that resource, and an attempt by a processor to own a lock requires only a single load operation, rather than a traditional atomic load followed by store, such that the processormore » only performs a read operation and the hardware locking device performs a subsequent write operation rather than the processor. A simple prefetching for non-contiguous data structures is also disclosed. A memory line is redefined so that in addition to the normal physical memory data, every line includes a pointer that is large enough to point to any other line in the memory, wherein the pointers to determine which memory line to prefetch rather than some other predictive algorithm. This enables hardware to effectively prefetch memory access patterns that are non-contiguous, but repetitive.« less

Analytical approach to determine vertical dynamics of a semi-trailer truck from the point of view of goods protection

NASA Astrophysics Data System (ADS)

Pidl, Renáta

2018-01-01

The overwhelming majority of intercontinental long-haul transportations of goods are usually carried out on road by semi-trailer trucks. Vibration has a major effect regarding the safety of the transport, the load and the transported goods. This paper deals with the logistics goals from the point of view of vibration and summarizes the methods to predict or measure the vibration load in order to design a proper system. From these methods, the focus of this paper is on the computer simulation of the vibration. An analytical method is presented to calculate the vertical dynamics of a semi-trailer truck containing general viscous damping and exposed to harmonic base excitation. For the purpose of a better understanding, the method will be presented through a simplified four degrees-of-freedom (DOF) half-vehicle model, which neglects the stiffness and damping of the tires, thus the four degrees-of-freedom are the vertical and angular displacements of the truck and the trailer. From the vertical and angular accelerations of the trailer, the vertical acceleration of each point of the platform of the trailer can easily be determined, from which the forces acting on the transported goods are given. As a result of this paper the response of the full platform-load-packaging system to any kind of vehicle, any kind of load and any kind of road condition can be analyzed. The peak acceleration of any point on the platform can be determined by the presented analytical method.

Rotordynamic Characteristics of the HPOTP (High Pressure Oxygen Turbopump) of the SSME (Space Shuttle Main Engine)

NASA Technical Reports Server (NTRS)

Childs, D. W.

1984-01-01

Rotational stability of turbopump components in the space shuttle main engine was studied via analysis of component and structural dynamic models. Subsynchronous vibration caused unacceptable migration of the rotor/housing unit with unequal load sharing of the synchronous bearings that resulted in the failure of the High Pressure Oxygen Turbopump. Linear analysis shows that a shrouded inducer eliminates the second critical speed and the stability problem, a stiffened rotor improves the rotordynamic characteristics of the turbopump, and installing damper boost/impeller seals reduces bearing loads. Nonlinear analysis shows that by increasing the "dead band' clearances, a marked reduction in peak bearing loads occurs.

Solar powered actuator with continuously variable auxiliary power control

NASA Technical Reports Server (NTRS)

Nola, F. J. (Inventor)

1984-01-01

A solar powered system is disclosed in which a load such as a compressor is driven by a main induction motor powered by a solar array. An auxiliary motor shares the load with the solar powered motor in proportion to the amount of sunlight available, is provided with a power factor controller for controlling voltage applied to the auxiliary motor in accordance with the loading on that motor. In one embodiment, when sufficient power is available from the solar cell, the auxiliary motor is driven as a generator by excess power from the main motor so as to return electrical energy to the power company utility lines.

29 CFR 1910.183 - Helicopters.

Code of Federal Regulations, 2014 CFR

2014-07-01

... 29 Labor 5 2014-07-01 2014-07-01 false Helicopters. 1910.183 Section 1910.183 Labor Regulations... OCCUPATIONAL SAFETY AND HEALTH STANDARDS Materials Handling and Storage § 1910.183 Helicopters. (a) [Reserved...) Housekeeping. Good housekeeping shall be maintained in all helicopter loading and unloading areas. (h) Load...

29 CFR 1910.183 - Helicopters.

Code of Federal Regulations, 2013 CFR

2013-07-01

... 29 Labor 5 2013-07-01 2013-07-01 false Helicopters. 1910.183 Section 1910.183 Labor Regulations... OCCUPATIONAL SAFETY AND HEALTH STANDARDS Materials Handling and Storage § 1910.183 Helicopters. (a) [Reserved...) Housekeeping. Good housekeeping shall be maintained in all helicopter loading and unloading areas. (h) Load...

29 CFR 1910.183 - Helicopters.

Code of Federal Regulations, 2012 CFR

2012-07-01

... 29 Labor 5 2012-07-01 2012-07-01 false Helicopters. 1910.183 Section 1910.183 Labor Regulations... OCCUPATIONAL SAFETY AND HEALTH STANDARDS Materials Handling and Storage § 1910.183 Helicopters. (a) [Reserved...) Housekeeping. Good housekeeping shall be maintained in all helicopter loading and unloading areas. (h) Load...

Democracy "Is" Working

ERIC Educational Resources Information Center

Owen-Smith, Jason; Scott, Christopher Thomas; McCormick, Jennifer B.

2012-01-01

As contemporary students of science and science policy, these authors find it hard to gainsay the easy abstractions of Hurlbut and Robert's commentary. "Good science is an achievement of a good society." They also share much common ground on the details. For instance, they endorse the majority of Hurlbut and Robert's thoughts with regard to the…

Simple measurement-based admission control for DiffServ access networks

NASA Astrophysics Data System (ADS)

Lakkakorpi, Jani

2002-07-01

In order to provide good Quality of Service (QoS) in a Differentiated Services (DiffServ) network, a dynamic admission control scheme is definitely needed as an alternative to overprovisioning. In this paper, we present a simple measurement-based admission control (MBAC) mechanism for DiffServ-based access networks. Instead of using active measurements only or doing purely static bookkeeping with parameter-based admission control (PBAC), the admission control decisions are based on bandwidth reservations and periodically measured & exponentially averaged link loads. If any link load on the path between two endpoints is over the applicable threshold, access is denied. Link loads are periodically sent to Bandwidth Broker (BB) of the routing domain, which makes the admission control decisions. The information needed in calculating the link loads is retrieved from the router statistics. The proposed admission control mechanism is verified through simulations. Our results prove that it is possible to achieve very high bottleneck link utilization levels and still maintain good QoS.

PEO-b-P4VP/Yttrium Hydroxide Hybrid Nanotubes as Supporter for Catalyst Gold Nanoparticles

NASA Astrophysics Data System (ADS)

Yang, Qian; Chen, Dao-yong

2012-06-01

The adsorption of poly (ethylene oxide)-b-poly(4-vinylpyridine)(PEO-b-P4VP) micelles onto the surface of yttrium hydroxide nanotubes (YNTs) resulted in the hybrid nanotubes with a dense P4VP inner layer and a stretched PEO outer layer surrounding YNTs. The dense P4VP layer was further stabilized by the crosslinking using 1,4-dibromobutane as the crosslinker. Then, the crosslinked hybrid nanotubes (CHNTs) were used as a novel nano supporter for loading the catalyst gold nanoparticles (GNPs) within the crosslinked P4VP layer. The resultant GNPs/CHNTs (GNTs loaded on CHNTs) were applied to catalyze the reduction reaction of p-nitrophenol. The results indicate that this novel nano supporter has advantages such as good dispersity in the suspension, high capacity in loading GNPs (0.87 mmol/g), high catalytic activity of the loaded GNPs (12.9 μmol-1min-1), and good reusability of GNTs/CHNTs.

Biomechanical validation of load-sharing rip-stop fixation for the repair of tissue-deficient rotator cuff tears.

PubMed

Burkhart, Stephen S; Denard, Patrick J; Konicek, John; Hanypsiak, Bryan T

2014-02-01

Poor-quality tendon is one of the most difficult problems the surgeon must overcome in achieving secure fixation during rotator cuff repair. A load-sharing rip-stop construct (LSRS) has recently been proposed as a method for improving fixation strength, but the biomechanical properties of this construct have not yet been examined. To compare the strength of the LSRS construct to that of single-row fixation for rotator cuff repair. Controlled laboratory study. Rotator cuff tears were created in 6 cadaveric matched-pair specimens and repaired with a single row or an LSRS. In the LSRS repair, a 2-mm suture tape was placed as an inverted mattress stitch in the rotator cuff, and sutures from 2 anchors were placed as simple stitches that passed medial to the suture tape. The suture tape limbs were secured with knotless anchors laterally before sutures were tied from the medial anchors. Displacement was observed with video tracking after cyclic loading, and specimens were loaded to failure. The mean load to failure was 371 ± 102 N in single-row repairs compared with 616 ± 185 N in LSRS repairs (P = .031). There was no difference in displacement with cyclic loading between the groups (3.3 ± 0.8 mm vs. 3.5 ± 1.1 mm; P = .561). In the single-row group, 4 of 6 failures occurred at the suture-tendon interface. In the LSRS group, only 1 failure occurred at the suture-tendon interface. The ultimate failure load of the LSRS construct for rotator cuff repair was 1.7 times that of a single-row construct in a cadaveric model. The LSRS rotator cuff repair construct may be useful in the repair of difficult tears such as massive tears, medial tears, and tears with tendon loss.

Design and characterization of sustained release ketoprofen entrapped carnauba wax microparticles.

PubMed

Oliveira, Rodinelli B; Nascimento, Thais L; Lima, Eliana M

2012-01-01

Ketoprofen is a non-steroid anti-inflammatory drug (NSAID) used in the treatment of rheumatic diseases and in mild to moderate pain. Ketoprofen has a short biological half-life and the commercially available conventional release formulations require dosages to be administered at least 2-3 times a day. Due to these characteristics, ketoprofen is a good candidate for the preparation of controlled release formulations. In this work, a multiparticulate-sustained release dosage form containing ketoprofen in a carnauba wax matrix was developed. Particles were prepared by an emulsion congealing technique. System variables were optimized using fractional factorial and response surface experimental design. Characterization of the particles included size and morphology, flow rate, drug loading and in vitro drug release. Spherical particles were obtained with high drug load and sustained drug release profile. The optimized particles had an average diameter of approximately 200 µm, 50% (w/w) drug load, good flow properties and prolonged ketoprofen release for more than 24 h. Carnauba wax microspheres prepared in this work represent a new multiparticulate-sustained release system for the NSAID ketoprofen, exhibiting good potential for application in further pharmaceutical processes.

Autobiographical Memory Sharing in Everyday Life: Characteristics of a Good Story

ERIC Educational Resources Information Center

Baron, Jacqueline M.; Bluck, Susan

2009-01-01

Storytelling is a ubiquitous human activity that occurs across the lifespan as part of everyday life. Studies from three disparate literatures suggest that older adults (as compared to younger adults) are (a) less likely to recall story details, (b) more likely to go off-target when sharing stories, and, in contrast, (c) more likely to receive…

Best Practices: Pass the Poetry

ERIC Educational Resources Information Center

Bafumo, Mary Ellen

2005-01-01

Sharing poetry with your students will lead to a lifetime benefit of appreciating the written word If you're an early riser and listen to public radio, you've probably heard Garrison Keillor, the host of "Prairie Home Companion," sharing a reading from the latest edition of "Pretty Good Poems." Each poem invariably evokes a reaction; whether it's…

In Flight, Online

ERIC Educational Resources Information Center

Lucking, Robert A.; Wighting, Mervyn J.; Christmann, Edwin P.

2005-01-01

The concept of flight for human beings has always been closely tied to imagination. To fly like a bird requires a mind that also soars. Therefore, good teachers who want to teach the scientific principles of flight recognize that it is helpful to share stories of their search for the keys to flight. The authors share some of these with the reader,…

75 FR 57310 - American Capital, Ltd.; Notice of Application

Federal Register 2010, 2011, 2012, 2013, 2014

2010-09-20

... markets for the common stock, the Fair Market Value will be determined in good faith by the Board, but in.... Under the Plan, a maximum of 750,000 shares of applicant's common stock, in the aggregate, may be issued to Non-employee Directors and options to purchase 93,750 shares of applicant's common stock may be...

Sustained Shared Thinking in an Early Childhood Setting: An Exploration of Practitioners' Perspectives

ERIC Educational Resources Information Center

Purdon, Anne

2016-01-01

Sustained shared thinking (SST) has been identified in the Teachers Standards (Early Years) (2013) as contributing to good progress and outcomes by children. In this paper, I define SST and discuss the outcomes of a study of practitioners' understandings of SST, its challenges and benefits. Writing frames, questionnaires and focus group interviews…

Dynamics of a split torque helicopter transmission

NASA Astrophysics Data System (ADS)

Krantz, Timothy L.

1994-06-01

Split torque designs, proposed as alternatives to traditional planetary designs for helicopter main rotor transmissions, can save weight and be more reliable than traditional designs. This report presents the results of an analytical study of the system dynamics and performance of a split torque gearbox that uses a balance beam mechanism for load sharing. The Lagrange method was applied to develop a system of equations of motion. The mathematical model includes time-varying gear mesh stiffness, friction, and manufacturing errors. Cornell's method for calculating the stiffness of spur gear teeth was extended and applied to helical gears. The phenomenon of sidebands spaced at shaft frequencies about gear mesh fundamental frequencies was simulated by modeling total composite gear errors as sinusoid functions. Although the gearbox has symmetric geometry, the loads and motions of the two power paths differ. Friction must be considered to properly evaluate the balance beam mechanism. For the design studied, the balance beam is not an effective device for load sharing unless the coefficient of friction is less than 0.003. The complete system stiffness as represented by the stiffness matrix used in this analysis must be considered to precisely determine the optimal tooth indexing position.

Dynamics of a split torque helicopter transmission. M.S. Thesis - Cleveland State Univ.

NASA Technical Reports Server (NTRS)

Krantz, Timothy L.

1994-01-01

Split torque designs, proposed as alternatives to traditional planetary designs for helicopter main rotor transmissions, can save weight and be more reliable than traditional designs. This report presents the results of an analytical study of the system dynamics and performance of a split torque gearbox that uses a balance beam mechanism for load sharing. The Lagrange method was applied to develop a system of equations of motion. The mathematical model includes time-varying gear mesh stiffness, friction, and manufacturing errors. Cornell's method for calculating the stiffness of spur gear teeth was extended and applied to helical gears. The phenomenon of sidebands spaced at shaft frequencies about gear mesh fundamental frequencies was simulated by modeling total composite gear errors as sinusoid functions. Although the gearbox has symmetric geometry, the loads and motions of the two power paths differ. Friction must be considered to properly evaluate the balance beam mechanism. For the design studied, the balance beam is not an effective device for load sharing unless the coefficient of friction is less than 0.003. The complete system stiffness as represented by the stiffness matrix used in this analysis must be considered to precisely determine the optimal tooth indexing position.

Effect of physical property of supporting media and variable hydraulic loading on hydraulic characteristics of advanced onsite wastewater treatment system.

PubMed

Sharma, Meena Kumari; Kazmi, Absar Ahmad

2015-01-01

A laboratory-scale study was carried out to investigate the effects of physical properties of the supporting media and variable hydraulic shock loads on the hydraulic characteristics of an advanced onsite wastewater treatment system. The system consisted of two upflow anaerobic reactors (a septic tank and an anaerobic filter) accommodated within a single unit. The study was divided into three phases on the basis of three different supporting media (Aqwise carriers, corrugated ring and baked clay) used in the anaerobic filter. Hydraulic loadings were based on peak flow factor (PFF), varying from one to six, to simulate the actual conditions during onsite wastewater treatment. Hydraulic characteristics of the system were identified on the basis of residence time distribution analyses. The system showed a very good hydraulic efficiency, between 0.86 and 0.93, with the media of highest porosity at the hydraulic loading of PFF≤4. At the higher hydraulic loading of PFF 6 also, an appreciable hydraulic efficiency of 0.74 was observed. The system also showed good chemical oxygen demand and total suspended solids removal efficiency of 80.5% and 82.3%, respectively at the higher hydraulic loading of PFF 6. Plug-flow dispersion model was found to be the most appropriate one to describe the mixing pattern of the system, with different supporting media at variable loading, during the tracer study.

Evaluation of the Hinge Moment and Normal Force Aerodynamic Loads from a Seamless Adaptive Compliant Trailing Edge Flap in Flight

NASA Technical Reports Server (NTRS)

Miller, Eric J.; Cruz, Josue; Lung, Shun-Fat; Kota, Sridhar; Ervin, Gregory; Lu, Kerr-Jia; Flick, Pete

2016-01-01

A seamless adaptive compliant trailing edge (ACTE) flap was demonstrated in flight on a Gulfstream III aircraft at the NASA Armstrong Flight Research Center. The trailing edge flap was deflected between minus 2 deg up and plus 30 deg down in flight. The safety-of-flight parameters for the ACTE flap experiment require that flap-to-wing interface loads be sensed and monitored in real time to ensure that the structural load limits of the wing are not exceeded. The attachment fittings connecting the flap to the aircraft wing rear spar were instrumented with strain gages and calibrated using known loads for measuring hinge moment and normal force loads in flight. The safety-of-flight parameters for the ACTE flap experiment require that flap-to-wing interface loads be sensed and monitored in real time to ensure that the structural load limits of the wing are not exceeded. The attachment fittings connecting the flap to the aircraft wing rear spar were instrumented with strain gages and calibrated using known loads for measuring hinge moment and normal force loads in flight. The interface hardware instrumentation layout and load calibration are discussed. Twenty-one applied calibration test load cases were developed for each individual fitting. The 2-sigma residual errors for the hinge moment was calculated to be 2.4 percent, and for normal force was calculated to be 7.3 percent. The hinge moment and normal force generated by the ACTE flap with a hinge point located at 26-percent wing chord were measured during steady state and symmetric pitch maneuvers. The loads predicted from analysis were compared to the loads observed in flight. The hinge moment loads showed good agreement with the flight loads while the normal force loads calculated from analysis were over-predicted by approximately 20 percent. Normal force and hinge moment loads calculated from the pressure sensors located on the ACTE showed good agreement with the loads calculated from the installed strain gages.

A Study on a Centralized Under-Voltage Load Shedding Scheme Considering the Load Characteristics

NASA Astrophysics Data System (ADS)

Deng, Jiyu; Liu, Junyong

Under-voltage load shedding is an important measure for maintaining voltage stability.Aiming at the optimal load shedding problem considering the load characteristics,firstly,the traditional under-voltage load shedding scheme based on a static load model may cause the analysis inaccurate is pointed out on the equivalent Thevenin circuit.Then,the dynamic voltage stability margin indicator is derived through local measurement.The derived indicator can reflect the voltage change of the key area in a myopia linear way.Dimensions of the optimal problem will be greatly simplified using this indicator.In the end,mathematical model of the centralized load shedding scheme is built with the indicator considering load characteristics.HSPPSO is introduced to slove the optimal problem.Simulation results on IEEE-39 system show that the proposed scheme display a good adaptability in solving the under-voltage load shedding considering dynamic load characteristics.

Reliable file sharing in distributed operating system using web RTC

NASA Astrophysics Data System (ADS)

Dukiya, Rajesh

2017-12-01

Since, the evolution of distributed operating system, distributed file system is come out to be important part in operating system. P2P is a reliable way in Distributed Operating System for file sharing. It was introduced in 1999, later it became a high research interest topic. Peer to Peer network is a type of network, where peers share network workload and other load related tasks. A P2P network can be a period of time connection, where a bunch of computers connected by a USB (Universal Serial Bus) port to transfer or enable disk sharing i.e. file sharing. Currently P2P requires special network that should be designed in P2P way. Nowadays, there is a big influence of browsers in our life. In this project we are going to study of file sharing mechanism in distributed operating system in web browsers, where we will try to find performance bottlenecks which our research will going to be an improvement in file sharing by performance and scalability in distributed file systems. Additionally, we will discuss the scope of Web Torrent file sharing and free-riding in peer to peer networks.

Load sharing in the growth of bundled biopolymers

PubMed Central

Wang, Ruizhe; Carlsson, A. E.

2014-01-01

To elucidate the nature of load sharing in the growth of multiple biopolymers, we perform stochastic simulations of the growth of biopolymer bundles against obstacles under a broad range of conditions and varying assumptions. The obstacle motion due to thermal fluctuations is treated explicitly. We assume the “Perfect Brownian Ratchet” (PBR) model, in which the polymerization rate equals the free-filament rate as soon as the filament-obstacle distance exceeds the monomer size. Accurate closed-form formulas are obtained for the case of a rapidly moving obstacle. We find the following: (1) load sharing is usually sub-perfect in the sense that polymerization is slower than for a single filament carrying the same average force; (2) the sub-perfect behavior becomes significant at a total force proportional to the logarithm or the square root of the number of filaments, depending on the alignment of the filaments; (3) for the special case of slow barrier diffusion and low opposing force, an enhanced obstacle velocity for an increasing number of filaments is possible; (4) the obstacle velocity is very sensitive to the alignment of the filaments in the bundle, with a staggered alignment being an order of magnitude faster than an unstaggered one at forces of only 0.5 pN per filament for 20 filaments; (5) for large numbers of filaments, the power is maximized at a force well below 1 pN per filament; (6) for intermediate values of the obstacle diffusion coefficient, the shape of the force velocity relation is very similar to that for rapid obstacle diffusion. PMID:25489273

Load sharing in the growth of bundled biopolymers.

PubMed

Wang, Ruizhe; Carlsson, A E

2014-11-01

To elucidate the nature of load sharing in the growth of multiple biopolymers, we perform stochastic simulations of the growth of biopolymer bundles against obstacles under a broad range of conditions and varying assumptions. The obstacle motion due to thermal fluctuations is treated explicitly. We assume the "Perfect Brownian Ratchet" (PBR) model, in which the polymerization rate equals the free-filament rate as soon as the filament-obstacle distance exceeds the monomer size. Accurate closed-form formulas are obtained for the case of a rapidly moving obstacle. We find the following: (1) load sharing is usually sub-perfect in the sense that polymerization is slower than for a single filament carrying the same average force; (2) the sub-perfect behavior becomes significant at a total force proportional to the logarithm or the square root of the number of filaments, depending on the alignment of the filaments; (3) for the special case of slow barrier diffusion and low opposing force, an enhanced obstacle velocity for an increasing number of filaments is possible; (4) the obstacle velocity is very sensitive to the alignment of the filaments in the bundle, with a staggered alignment being an order of magnitude faster than an unstaggered one at forces of only 0.5 pN per filament for 20 filaments; (5) for large numbers of filaments, the power is maximized at a force well below 1 pN per filament; (6) for intermediate values of the obstacle diffusion coefficient, the shape of the force velocity relation is very similar to that for rapid obstacle diffusion.

Thermal Vacuum Testing of a Proto-flight Miniature Loop Heat Pipe with Two Evaporators and Two Condensers

NASA Technical Reports Server (NTRS)

Ku, Jentung; Ottenstein, Laura

2011-01-01

This paper describes thermal vacuum testing of a proto-flight miniature loop heat pipe (MLHP) with two evaporators and two condensers designed for future small systems applications requiring low mass, low power and compactness. Each evaporator contains a wick with an outer diameter of 6.35 mm, and each has its own integral compensation chamber (CC). Miniaturization of the loop components reduces the volume and mass of the thermal system. Multiple evaporators provide flexibility for placement of instruments that need to be maintained at the same temperature, and facilitate heat load sharing among instruments, reducing the auxiliary heater power requirement. A flow regulator is used to regulate heat dissipations between the two condensers, allowing flexible placement of radiators on the spacecraft. A thermoelectric converter (TEC) is attached to each CC for control of the operating temperature and enhancement of start-up success. Tests performed include start-up, power cycle, sink temperature cycle, high power and low power operation, heat load sharing, and operating temperature control. The proto-flight MLHP demonstrated excellent performance in the thermal vacuum test. The loop started successfully and operated stably under various evaporator heat loads and condenser sink temperatures. The TECs were able to maintain the loop operating temperature within b1K of the desired set point temperature at all power levels and all sink temperatures. The un-powered evaporator would automatically share heat from the other powered evaporator. The flow regulator was able to regulate the heat dissipation among the radiators and prevent vapor from flowing into the liquid line.

Aerocapture Guidance Algorithm Comparison Campaign

NASA Technical Reports Server (NTRS)

Rousseau, Stephane; Perot, Etienne; Graves, Claude; Masciarelli, James P.; Queen, Eric

2002-01-01

The aerocapture is a promising technique for the future human interplanetary missions. The Mars Sample Return was initially based on an insertion by aerocapture. A CNES orbiter Mars Premier was developed to demonstrate this concept. Mainly due to budget constraints, the aerocapture was cancelled for the French orbiter. A lot of studies were achieved during the three last years to develop and test different guidance algorithms (APC, EC, TPC, NPC). This work was shared between CNES and NASA, with a fruitful joint working group. To finish this study an evaluation campaign has been performed to test the different algorithms. The objective was to assess the robustness, accuracy, capability to limit the load, and the complexity of each algorithm. A simulation campaign has been specified and performed by CNES, with a similar activity on the NASA side to confirm the CNES results. This evaluation has demonstrated that the numerical guidance principal is not competitive compared to the analytical concepts. All the other algorithms are well adapted to guaranty the success of the aerocapture. The TPC appears to be the more robust, the APC the more accurate, and the EC appears to be a good compromise.

Transverse flexural tests as a tool for assessing damage to PMR-15 composites from isothermal aging in air at elevated temperatures

NASA Technical Reports Server (NTRS)

Bowles, Kenneth J.

1992-01-01

To date, the effect of thermo-oxidative aging on unidirectional composite mechanical properties has been monitored by the measurement of interlaminar shear strength (ILSS) and either three or four point longitudinal flexural strength (LFS) of the composites being tested. Both results are affected by the fiber-to-matrix bonding, the former being dependent on the shear resistance of the interface and the latter on the degree of load sharing by the fibers through the fiber/matrix interface. Recently, fiber/matrix interfacial bond strengths have been monitored using a transverse flexural strength (TFS) test method. This test method was used to evaluate the effect of fiber surface treatment on the fiber/matrix bond. The interface bonding was varied in these tests using Hercules A-fibers with three-types of surfaces that produce bonds of poor, better, and good quality. The TFS was found not only to be sensitive to the bonding, but also to the aging time of unidirectional A-fiber/PMR-15 composites. This relationship reflects the mechanism by which the PMR-15 degrades during thermal aging.

Delaminations in composite plates under transverse static loads - Experimental results

NASA Technical Reports Server (NTRS)

Finn, Scott R.; He, Yi-Fei; Springer, George S.

1992-01-01

Tests were performed measuring the damage initiation loads and the locations, shapes, and sizes of delaminations in Fiberite T300/976 graphite/epoxy, Fiberite IM7/977-2 graphite-toughened epoxy, and ICI APC-2 graphite-PEEK plates subjected to transverse static loads. The data were compared to the results of the Finn-Springer model, and good agreements were found between the measured and calculated delamination lengths and widths.

How Cognitive Load Influences Speakers' Choice of Referring Expressions.

PubMed

Vogels, Jorrig; Krahmer, Emiel; Maes, Alfons

2015-08-01

We report on two experiments investigating the effect of an increased cognitive load for speakers on the choice of referring expressions. Speakers produced story continuations to addressees, in which they referred to characters that were either salient or non-salient in the discourse. In Experiment 1, referents that were salient for the speaker were non-salient for the addressee, and vice versa. In Experiment 2, all discourse information was shared between speaker and addressee. Cognitive load was manipulated by the presence or absence of a secondary task for the speaker. The results show that speakers under load are more likely to produce pronouns, at least when referring to less salient referents. We take this finding as evidence that speakers under load have more difficulties taking discourse salience into account, resulting in the use of expressions that are more economical for themselves. © 2014 Cognitive Science Society, Inc.

Thermal elastohydrodynamic lubrication of spur gears

NASA Technical Reports Server (NTRS)

Wang, K. L.; Cheng, H. S.

1980-01-01

An analysis and computer program called TELSGE were developed to predict the variations of dynamic load, surface temperature, and lubricant film thickness along the contacting path during the engagement of a pair of involute spur gears. The analysis of dynamic load includes the effect of gear inertia, the effect of load sharing of adjacent teeth, and the effect of variable tooth stiffness which are obtained by a finite-element method. Results obtained from TELSGE for the dynamic load distributions along the contacting path for various speeds of a pair of test gears show patterns similar to that observed experimentally. Effects of damping ratio, contact ratio, tip relief, and tooth error on the dynamic load were examined. In addition, two dimensionless charts are included for predicting the maximum equilibrium surface temperature, which can be used to estimate directly the lubricant film thickness based on well established EHD analysis.

Sharing and interoperation of Digital Dongying geospatial data

NASA Astrophysics Data System (ADS)

Zhao, Jun; Liu, Gaohuan; Han, Lit-tao; Zhang, Rui-ju; Wang, Zhi-an

2006-10-01

Digital Dongying project was put forward by Dongying city, Shandong province, and authenticated by Ministry of Information Industry, Ministry of Science and Technology and Ministry of Construction P.R.CHINA in 2002. After five years of building, informationization level of Dongying has reached to the advanced degree. In order to forward the step of digital Dongying building, and to realize geospatial data sharing, geographic information sharing standards are drawn up and applied into realization. Secondly, Digital Dongying Geographic Information Sharing Platform has been constructed and developed, which is a highly integrated platform of WEBGIS. 3S (GIS, GPS, RS), Object oriented RDBMS, Internet, DCOM, etc. It provides an indispensable platform for sharing and interoperation of Digital Dongying Geospatial Data. According to the standards, and based on the platform, sharing and interoperation of "Digital Dongying" geospatial data have come into practice and the good results have been obtained. However, a perfect leadership group is necessary for data sharing and interoperation.

Facility or Facilities? That is the Question.

NASA Astrophysics Data System (ADS)

Viso, M.

2018-04-01

The management of the martian samples upon arrival on the Earth will require a lot of work to ensure a safe life detection and biohazard testing during the quarantine. This will induce a sharing of the load between several facilities.

Airport Information Retrieval System (AIRS) User's Guide

DOT National Transportation Integrated Search

1973-08-01

The handbook is a user's guide for a prototype air traffic flow control automation system developed for the FAA's System Command Center. The system is implemented on a time-sharing computer and is designed to provide airport traffic load predictions ...

Airport Information Retrieval System (AIRS) System Support Manual

DOT National Transportation Integrated Search

1973-01-01

This handbook is a support manual for prototype air traffic flow control automation system developed for the FAA's Systems Command Center. The system is implemented on a time-sharing computer and is designed to provide airport traffic load prediction...

Characterization and development of truck load spectra and growth factors for current and future pavement design practices in Louisiana.

DOT National Transportation Integrated Search

2011-07-01

For pavement design practices, several factors must be considered to ensure good pavement performance over the anticipated life cycle. : Such factors include, but are not limited to, the type of paving materials, traffic loading characteristics, prev...

Load Balancing Strategies for Multiphase Flows on Structured Grids

NASA Astrophysics Data System (ADS)

Olshefski, Kristopher; Owkes, Mark

2017-11-01

The computation time required to perform large simulations of complex systems is currently one of the leading bottlenecks of computational research. Parallelization allows multiple processing cores to perform calculations simultaneously and reduces computational times. However, load imbalances between processors waste computing resources as processors wait for others to complete imbalanced tasks. In multiphase flows, these imbalances arise due to the additional computational effort required at the gas-liquid interface. However, many current load balancing schemes are only designed for unstructured grid applications. The purpose of this research is to develop a load balancing strategy while maintaining the simplicity of a structured grid. Several approaches are investigated including brute force oversubscription, node oversubscription through Message Passing Interface (MPI) commands, and shared memory load balancing using OpenMP. Each of these strategies are tested with a simple one-dimensional model prior to implementation into the three-dimensional NGA code. Current results show load balancing will reduce computational time by at least 30%.

Studies on questions of design and construction of chain scraper conveyors. [mining operations

NASA Technical Reports Server (NTRS)

Guder, H.

1980-01-01

The basic behavior of mining crushed goods in chain scraper conveyors was examined using a special test stand. The characteristics resistance lines of the upper end-piece were determined for conveyor idle as a function of the determinative crushed good characteristics (granular structure, moisture content, type of goods) on the size of the conveyor load, on the conveyor construction and on the stopped time of the conveyor. Crushed goods with a narrow granular profile and sphere-like grains caused about 35% greater resistance than fine coal and raw coal with broad granular profile. For goods containing water more than 10% by weight, the solids friction retreated in favor of flow friction. The coefficient of resistance decreased considerably in the range of lower speeds and then increased with increasing conveyor speed. The conveyance of sandstone ore required about 280% greater specific drive than the conveyance of raw coal. Resistance coefficients for coal and raw coal showed no dependence on the design of the conveyor. Start-up of loaded conveyors after longer stop times was simulated and the specific break-loose force was determined.

Equity, Equal Shares or Equal Final Outcomes? Group Goal Guides Allocations of Public Goods.

PubMed

Kazemi, Ali; Eek, Daniel; Gärling, Tommy

2017-01-01

In an experiment we investigate preferences for allocation of a public good among group members who contributed unequally in providing the public good. Inducing the group goal of productivity resulted in preferences for equitable allocations, whereas inducing the group goals of harmony and social concern resulted in preferences for equal final outcomes. The study makes a contribution by simultaneously treating provision and allocation of a public good, thus viewing these as related processes. Another contribution is that a new paradigm is introduced that bears closer resemblance to real life public good dilemmas than previous research paradigms do.

Shared and disorder-specific task-positive and default mode network dysfunctions during sustained attention in paediatric Attention-Deficit/Hyperactivity Disorder and obsessive/compulsive disorder.

PubMed

Norman, Luke J; Carlisi, Christina O; Christakou, Anastasia; Cubillo, Ana; Murphy, Clodagh M; Chantiluke, Kaylita; Simmons, Andrew; Giampietro, Vincent; Brammer, Michael; Mataix-Cols, David; Rubia, Katya

2017-01-01

Patients with Attention-Deficit/Hyperactivity Disorder (ADHD) and obsessive/compulsive disorder (OCD) share problems with sustained attention, and are proposed to share deficits in switching between default mode and task positive networks. The aim of this study was to investigate shared and disorder-specific brain activation abnormalities during sustained attention in the two disorders. Twenty boys with ADHD, 20 boys with OCD and 20 age-matched healthy controls aged between 12 and 18 years completed a functional magnetic resonance imaging (fMRI) version of a parametrically modulated sustained attention task with a progressively increasing sustained attention load. Performance and brain activation were compared between groups. Only ADHD patients were impaired in performance. Group by sustained attention load interaction effects showed that OCD patients had disorder-specific middle anterior cingulate underactivation relative to controls and ADHD patients, while ADHD patients showed disorder-specific underactivation in left dorsolateral prefrontal cortex/dorsal inferior frontal gyrus (IFG). ADHD and OCD patients shared left insula/ventral IFG underactivation and increased activation in posterior default mode network relative to controls, but had disorder-specific overactivation in anterior default mode regions, in dorsal anterior cingulate for ADHD and in anterior ventromedial prefrontal cortex for OCD. In sum, ADHD and OCD patients showed mostly disorder-specific patterns of brain abnormalities in both task positive salience/ventral attention networks with lateral frontal deficits in ADHD and middle ACC deficits in OCD, as well as in their deactivation patterns in medial frontal DMN regions. The findings suggest that attention performance in the two disorders is underpinned by disorder-specific activation patterns.

Concept Design of Trailor Ferry Service to Carry 150 Trailers Between Jacksonville, FL and Bridgeport, CT of USA

NASA Astrophysics Data System (ADS)

Sindagi, S. C.; Sandhu, B. S.

2015-04-01

With the increased load on highways, today there is a need to develop alternate ways to transport goods within the sovereignty. The use of ships to transport goods has always been the primary method of transporting goods across the seas but it can also be used to transport goods within the country. This way we can reduce the load on highways which at this point of time serve as the primary method of transportation. Worldwide very few ferries are in operation which transports 100-150 Trailers between two ports. Catching on this opportunity for design, construction and operation of vessels, a survey for possible routes in United States of America which will transport 150 Trailers has been conducted by various authorities and organizations. The challenge here is to determine the parameters of the vessel and design a fleet of vessels that could carry trailers along with their tractors within the least possible time and in with least possible freight between Jacksonville, FL and Bridgeport, CT of United States of America. The primary aim of the work presented here is to propose a design with fleet in such a way that each day 150 trailers could be loaded and unloaded at each of the two mentioned ports. An analysis of the route between the ports brought out various primary parameters like the distance, weather, different load lines to be encountered and also several size constraints that the vessel needs to adhere to, in order to ply smoothly on this route. The vessel is designed as per the Guidelines for ships operating in international waters. The economic analysis of the project was performed spanning over 20 years and the best freight was found out which would be most profitable for the company as well as be a good value for money for the customers.

Explaining and modeling the concentration and loading of Escherichia coli in a stream-A case study.

PubMed

Wang, Chaozi; Schneider, Rebecca L; Parlange, Jean-Yves; Dahlke, Helen E; Walter, M Todd

2018-09-01

Escherichia coli (E. coli) level in streams is a public health indicator. Therefore, being able to explain why E. coli levels are sometimes high and sometimes low is important. Using citizen science data from Fall Creek in central NY we found that complementarily using principal component analysis (PCA) and partial least squares (PLS) regression provided insights into the drivers of E. coli and a mechanism for predicting E. coli levels, respectively. We found that stormwater, temperature/season and shallow subsurface flow are the three dominant processes driving the fate and transport of E. coli. PLS regression modeling provided very good predictions under stormwater conditions (R 2  = 0.85 for log (E. coli concentration) and R 2  = 0.90 for log (E. coli loading)); predictions under baseflow conditions were less robust. But, in our case, both E. coli concentration and E. coli loading were significantly higher under stormwater condition, so it is probably more important to predict high-flow E. coli hazards than low-flow conditions. Besides previously reported good indicators of in-stream E. coli level, nitrate-/nitrite-nitrogen and soluble reactive phosphorus were also found to be good indicators of in-stream E. coli levels. These findings suggest management practices to reduce E. coli concentrations and loads in-streams and, eventually, reduce the risk of waterborne disease outbreak. Copyright © 2018. Published by Elsevier B.V.

Athletics: The Good It Should Do

ERIC Educational Resources Information Center

Stoll, Sharon Kay

2011-01-01

The purpose of this article is to discuss a coach's perspective of the good that sport should do. The author argues that the relationships developed through the coaching experience are powerful, formative, and exceptional. She discusses the important moral values of sharing and caring and how these are important in the moral development of the…

Aspiring to Level 5 Leadership

ERIC Educational Resources Information Center

DeMary, Jo Lynne S.

2005-01-01

The author shares the lessons she learned from the book, Good to Great. Author Jim Collins and his team of researchers had spent five years studying the characteristics of companies that had gone from good to great and compared these companies with organizations that had yet to make the leap. The concepts and strategies they developed were based…

SAPCO: From Good to Great

ERIC Educational Resources Information Center

Alsaif, Saleh; Edinger, Brandon; Kodathala, Teja; Korzaan, Melinda

2017-01-01

Saudi Arabian Petrochemical Company (SAPCO), a petrochemicals manufacturer, has decided to make some major internal changes to gain increased market share and continue its success. It has been easy going for some time now, and business has been very good, but in order to take that next step, SAPCO needs to attain the Responsible Care…

Making the Common Good Common

ERIC Educational Resources Information Center

Chase, Barbara

2011-01-01

How are independent schools to be useful to the wider world? Beyond their common commitment to educate their students for meaningful lives in service of the greater good, can they educate a broader constituency and, thus, share their resources and skills more broadly? Their answers to this question will be shaped by their independence. Any…

The Hollywood Curriculum: Who Is the "Good" Teacher?

ERIC Educational Resources Information Center

Dalton, Mary M.

1995-01-01

Study analyzed 60 years of motion pictures to construct a theory of curriculum in the movies. Hollywood's ideal teachers were those who shared character traits found consistently in the films, traits that cut across traditional film genres and persisted over time. Good teachers in the movies used a distinctive curricular approach. (SM)

Learning to Share: Life Lessons in Group Dynamics

ERIC Educational Resources Information Center

Potash, Betsy

2016-01-01

In this article, Betsy Potash shares the frustration she experienced as a student when working on group projects. She struggled with being a good listener and with a tendency to dominate the group projects. Teachers had not taught her how to work well in a group. During her first year as a teacher, Betsy attended a faculty retreat where she…

Examining Antecedents of Knowledge-Sharing Factors on Research Supervision: An Empirical Study

ERIC Educational Resources Information Center

Khosravi, Arash; Ahmad, Mohammad Nazir

2016-01-01

The use of an effective supervision mechanism is crucial between a student and supervisor. The essential knowledge shared and transferred between these two parties must be observed and understood very well in order to ensure that students are produced at good level of quality for future professional knowledge workers. The aim of this study was to…

Out of the Wallet and into the Purse: Using Micro Data to Test Income Pooling

ERIC Educational Resources Information Center

Ward-Batts, Jennifer

2008-01-01

This paper uses an exogenous change in the intrahousehold distribution of income, provided by a change in United Kingdom Family Allowance policy to test the income-pooling hypothesis implied by unitary household models. Expenditure shares are estimated for a wide range of goods using household-level data. Shifts in expenditure shares suggest that…

78 FR 60348 - Self-Regulatory Organizations; Miami International Securities Exchange LLC; Notice of Filing and...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-10-01

... applicant must: (i) Be a Member in good standing of MIAX; (ii) qualify as an ``accredited investor'' as such... each unit (i) 101,695 shares of MIH common stock and (ii) warrants to purchase 2,182,639 shares of common stock of MIH in exchange for such participant Member's initial cash capital contribution of $508...

Evaluation of a Concrete Continuous Beam Bridge Using Load Test

NASA Astrophysics Data System (ADS)

Zhang, Xiedong; Li, Hong; Li, Xiaofan; Xiang, Musheng; Shen, Chengwu

2007-03-01

Load test is an efficient way to evaluate highway bridges. This paper presents static and dynamic load tests on a prestressed concrete continuous beam bridge. We obtained the influence line and the vibration property of the bridge from FEM analysis. The stress, deformation and the vibration characteristics of the bridge were measured. We found that the measured data are consistent with those from the theoretical calculation, indicating good condition of the bridge.

Load Measurement in Structural Members Using Guided Acoustic Waves

NASA Astrophysics Data System (ADS)

Chen, Feng; Wilcox, Paul D.

2006-03-01

A non-destructive technique to measure load in structures such as rails and bridge cables by using guided acoustic waves is investigated both theoretically and experimentally. Robust finite element models for predicting the effect of load on guided wave propagation are developed and example results are presented for rods. Reasonably good agreement of experimental results with modelling prediction is obtained. The measurement technique has been developed to perform tests on larger specimens.

Optimum Platinum Loading In Pt/SnO2 CO-Oxidizing Catalysts

NASA Technical Reports Server (NTRS)

Schryer, David R.; Upchurch, Billy T.; Davis, Patricia P.; Brown, Kenneth G.; Schryer, Jacqueline

1991-01-01

Platinum on tin oxide (Pt/SnO2) good catalyst for oxidation of carbon monoxide at or near room temperature. Catalytic activity peaks at about 17 weight percent Pt. Catalysts with platinum loadings as high as 46 percent fabricated by technique developed at Langley Research Center. Work conducted to determine optimum platinum loading for this type of catalyst. Major application is removal of unwanted CO and O2 in CO2 lasers.

Open Architecture Data System for NASA Langley Combined Loads Test System

NASA Technical Reports Server (NTRS)

Lightfoot, Michael C.; Ambur, Damodar R.

1998-01-01

The Combined Loads Test System (COLTS) is a new structures test complex that is being developed at NASA Langley Research Center (LaRC) to test large curved panels and cylindrical shell structures. These structural components are representative of aircraft fuselage sections of subsonic and supersonic transport aircraft and cryogenic tank structures of reusable launch vehicles. Test structures are subjected to combined loading conditions that simulate realistic flight load conditions. The facility consists of two pressure-box test machines and one combined loads test machine. Each test machine possesses a unique set of requirements or research data acquisition and real-time data display. Given the complex nature of the mechanical and thermal loads to be applied to the various research test articles, each data system has been designed with connectivity attributes that support both data acquisition and data management functions. This paper addresses the research driven data acquisition requirements for each test machine and demonstrates how an open architecture data system design not only meets those needs but provides robust data sharing between data systems including the various control systems which apply spectra of mechanical and thermal loading profiles.

Decision-making of older patients in context of the doctor-patient relationship: a typology ranging from "self-determined" to "doctor-trusting" patients.

PubMed

Wrede-Sach, Jennifer; Voigt, Isabel; Diederichs-Egidi, Heike; Hummers-Pradier, Eva; Dierks, Marie-Luise; Junius-Walker, Ulrike

2013-01-01

Background. This qualitative study aims to gain insight into the perceptions and experiences of older patients with regard to sharing health care decisions with their general practitioners. Patients and Methods. Thirty-four general practice patients (≥70 years) were asked about their preferences and experiences concerning shared decision making with their doctors using qualitative semistructured interviews. All interviews were analysed according to principles of content analysis. The resulting categories were then arranged into a classification grid to develop a typology of preferences for participating in decision-making processes. Results. Older patients generally preferred to make decisions concerning everyday life rather than medical decisions, which they preferred to leave to their doctors. We characterised eight different patient types based on four interdependent positions (self-determination, adherence, information seeking, and trust). Experiences of a good doctor-patient relationship were associated with trust, reliance on the doctor for information and decision making, and adherence. Conclusion. Owing to the varied patient decision-making types, it is not easy for doctors to anticipate the desired level of patient involvement. However, the decision matter and the self-determination of patients provide good starting points in preparing the ground for shared decision making. A good relationship with the doctor facilitates satisfying decision-making experiences.

The Nitrate App: Enhancing nutrient best management practice adoption and targeting via instantaneous, on-farm nitrate data

NASA Astrophysics Data System (ADS)

Rozemeijer, J.; De Geus, D.; Ekkelenkamp, R.

2016-12-01

Sociological surveys suggest that farmers understand that agriculture contributes to nutrient pollution but the same surveys also indicate that in the absence of on-farm nitrate data, farmers assume someone else is causing the problem. This tendency to overestimate our own abilities is common to all of us and often described as "Lake Wobegon Syndrome" after the mythical town where "where all the women are strong, all the men are good-looking, and all the children are above average." We developed the Nitrate App for smartphones to enable farmers and citizens to collect and share nitrate concentration measurements. The app accurately reads and interprets nitrate test strips, directly displays the measured concentration, and gives the option to share the result. The shared results are immediately visualised in the online Delta Data Viewer. Within this viewer, user group specific combinations of background maps, monitoring data, and study area characteristics can be configured. Through the Nitrate App's mapping function project managers can more accurately target conservation practices to areas with the highest nitrate concentrations and loads. Furthermore, we expect that the actual on-farm data helps to overcome the "Lake Wobegon Effect" and will encourage farmers to talk to specialists about the right nutrient best management practices (BMP's) for their farm. After implementing these BMP's, the farmers can keep monitoring to evaluate the reduction in nitrate losses. In this presentation, we explain the Nitrate App technology and present the results of the first field applications in The Netherlands. We expect this free to download app to have wide transferability across watershed projects worldwide focusing on nitrate contamination of groundwater or surface water. Its simple design requires no special equipment outside of the nitrate test strips, a reference card, and a smartphone. The technology is also transferable to other relevant solutes for which test strips are available, like ammonium, phosphate, sulphate, chloride, and pH.

Health risks in international container and bulk cargo transport due to volatile toxic compounds.

PubMed

Baur, Xaver; Budnik, Lygia Therese; Zhao, Zhiwei; Bratveit, Magne; Djurhuus, Rune; Verschoor, Louis; Rubino, Federico Maria; Colosio, Claudio; Jepsen, Jorgen R

2015-01-01

To ensure the preservation and quality of the goods, physical (i.e. radiation) or chemical pest control is needed. The dark side of such consents may bear health risks in international transport and production sharing. In fact, between 10% and 20% of all containers arriving European harbors were shown to contain volatile toxic substances above the exposure limit values. Possible exposure to these toxic chemicals may occur not only for the applicators but also the receiver by off gassing from products, packing materials or transport units like containers. A number of intoxications, some with lethal outcome, occur not only during the fumigation, but also during freight transport (on bulk carriers and other transport vessels), as well as in the logistic lines during loading and unloading. Risk occupations include dock-workers, seafarers, inspectors, as well as the usually uninformed workers of importing enterprises that unload the products. Bystanders as well as vulnerable consumers may also be at risk. Ongoing studies focus on the release of these toxic volatile substances from various goods. It was shown that the half-lives of the off-gassing process range between minutes and months, depending on the toxic substance, its chemical reactivity, concentration, the temperature, the contaminated matrix (goods and packing materials), and the packing density in the transport units. Regulations on declaration and handling dangerous goods are mostly not followed. It is obvious that this hazardous situation in freight transport urgently requires preventive steps. In order to improve awareness and relevant knowledge there is a need for more comprehensive information on chemical hazards and a broader implementation of the already existing regulations and guidelines, such as those from ILO, IMO, and national authorities. It is also necessary to have regular controls by the authorities on a worldwide scale, which should be followed by sanctions in case of disregarding regulations. Further, fumigated containers must have a warning sign corresponding to international recommendations and national regulations, and freight documents have to indicate any potential hazard during stripping the goods.

Exploring Persona-Scenarios - Using Storytelling to Create Design Ideas

NASA Astrophysics Data System (ADS)

Madsen, Sabine; Nielsen, Lene

This paper explores the persona-scenario method by investigating how the method can support project participants in generating shared understandings and design ideas. As persona-scenarios are stories we draw on narrative theory to define what a persona-scenario is and which narrative elements it should consist of. Based on an empirical study a key finding is that despite our inherent human ability to construct, tell, and interpret stories it is not easy to write and present a good, coherent, and design-oriented story without methodical support. The paper therefore contributes with guidelines that delineate a) what a design-oriented persona-scenario should consist of (product) and b) how to write it (procedure) in order to generate and validate as many, new, and shared understandings and design ideas as possible (purpose). The purpose of the guidelines is to facilitate the construction of persona-scenarios as good, coherent stories, which make sense to the storytellers and to the audience - and which therefore generate many, new, and shared understandings and design ideas.

Attention induced neural response trade-off in retinotopic cortex under load.

PubMed

Torralbo, Ana; Kelley, Todd A; Rees, Geraint; Lavie, Nilli

2016-09-14

The effects of perceptual load on visual cortex response to distractors are well established and various phenomena of 'inattentional blindness' associated with elimination of visual cortex response to unattended distractors, have been documented in tasks of high load. Here we tested an account for these effects in terms of a load-induced trade-off between target and distractor processing in retinotopic visual cortex. Participants were scanned using fMRI while performing a visual-search task and ignoring distractor checkerboards in the periphery. Retinotopic responses to target and distractors were assessed as a function of search load (comparing search set-sizes two, three and five). We found that increased load not only increased activity in frontoparietal network, but also had opposite effects on retinotopic responses to target and distractors. Target-related signals in areas V2-V3 linearly increased, while distractor response linearly decreased, with increased load. Critically, the slopes were equivalent for both load functions, thus demonstrating resource trade-off. Load effects were also found in displays with the same item number in the distractor hemisphere across different set sizes, thus ruling out local intrahemispheric interactions as the cause. Our findings provide new evidence for load theory proposals of attention resource sharing between target and distractor leading to inattentional blindness.

Attention induced neural response trade-off in retinotopic cortex under load

PubMed Central

Torralbo, Ana; Kelley, Todd A.; Rees, Geraint; Lavie, Nilli

2016-01-01

The effects of perceptual load on visual cortex response to distractors are well established and various phenomena of ‘inattentional blindness’ associated with elimination of visual cortex response to unattended distractors, have been documented in tasks of high load. Here we tested an account for these effects in terms of a load-induced trade-off between target and distractor processing in retinotopic visual cortex. Participants were scanned using fMRI while performing a visual-search task and ignoring distractor checkerboards in the periphery. Retinotopic responses to target and distractors were assessed as a function of search load (comparing search set-sizes two, three and five). We found that increased load not only increased activity in frontoparietal network, but also had opposite effects on retinotopic responses to target and distractors. Target-related signals in areas V2–V3 linearly increased, while distractor response linearly decreased, with increased load. Critically, the slopes were equivalent for both load functions, thus demonstrating resource trade-off. Load effects were also found in displays with the same item number in the distractor hemisphere across different set sizes, thus ruling out local intrahemispheric interactions as the cause. Our findings provide new evidence for load theory proposals of attention resource sharing between target and distractor leading to inattentional blindness. PMID:27625311

The Effects of Shared Information on Pilot-Controller Situation Awareness And Re-Route Negotiation

NASA Technical Reports Server (NTRS)

Farley, Todd C.; Hansman, R. John; Endsley, Mica R.; Amonlirdviman, Keith

1999-01-01

The effect of shared information is assessed in terms of pilot-controller negotiating behavior and shared situation awareness. Pilot goals and situation awareness requirements are developed and compared against those of air traffic controllers to identify areas of common and competing interest. An exploratory, part-task simulator experiment is described which evaluates the extent to which shared information may lead pilots and controllers to cooperate or compete when negotiating route amendments. Results are presented which indicate that shared information enhances situation awareness and can engender more collaborative interaction between pilots and air traffic controllers. Furthermore, the value of providing controllers with a good-quality weather overlay on their plan view displays is demonstrated. Observed improvements in situation awareness and separation assurance are discussed.

International Peacekeeping Operations

PubMed Central

2017-01-01

This article takes stock of some of the important contributions to the study of peacekeeping (PK). Two key topics stand out: peacekeeping burden sharing and mission effectiveness. For burden sharing, the theoretical foundation is the private provision of public goods and joint products. Implications for burden sharing differ whether financial or troop contributions are being shared, with the latter driven by jointly produced country-specific benefits. Financial burden sharing can also differ between United Nations (UN)-led and non-UN-led peacekeeping operations, wherein country-specific benefits are especially important for the latter. Many articles gauge peacekeeping effectiveness by the mission’s ability to maintain the peace or to protect lives for a set time period. More recently, multiple criteria are raised for evaluating peacekeeping in today’s world of multifaceted peacebuilding operations. PMID:28989181

A comparison between theoretical prediction and experimental measurement of the dynamic behavior of spur gears

NASA Technical Reports Server (NTRS)

Rebbechi, Brian; Forrester, B. David; Oswald, Fred B.; Townsend, Dennis P.

1992-01-01

A comparison was made between computer model predictions of gear dynamics behavior and experimental results. The experimental data were derived from the NASA gear noise rig, which was used to record dynamic tooth loads and vibration. The experimental results were compared with predictions from the DSTO Aeronautical Research Laboratory's gear dynamics code for a matrix of 28 load speed points. At high torque the peak dynamic load predictions agree with the experimental results with an average error of 5 percent in the speed range 800 to 6000 rpm. Tooth separation (or bounce), which was observed in the experimental data for light torque, high speed conditions, was simulated by the computer model. The model was also successful in simulating the degree of load sharing between gear teeth in the multiple tooth contact region.

A novel strategy for load balancing of distributed medical applications.

PubMed

Logeswaran, Rajasvaran; Chen, Li-Choo

2012-04-01

Current trends in medicine, specifically in the electronic handling of medical applications, ranging from digital imaging, paperless hospital administration and electronic medical records, telemedicine, to computer-aided diagnosis, creates a burden on the network. Distributed Service Architectures, such as Intelligent Network (IN), Telecommunication Information Networking Architecture (TINA) and Open Service Access (OSA), are able to meet this new challenge. Distribution enables computational tasks to be spread among multiple processors; hence, performance is an important issue. This paper proposes a novel approach in load balancing, the Random Sender Initiated Algorithm, for distribution of tasks among several nodes sharing the same computational object (CO) instances in Distributed Service Architectures. Simulations illustrate that the proposed algorithm produces better network performance than the benchmark load balancing algorithms-the Random Node Selection Algorithm and the Shortest Queue Algorithm, especially under medium and heavily loaded conditions.

The effect of perceptual load on attention-induced motion blindness: the efficiency of selective inhibition.

PubMed

Hay, Julia L; Milders, Maarten M; Sahraie, Arash; Niedeggen, Michael

2006-08-01

Recent visual marking studies have shown that the carry-over of distractor inhibition can impair the ability of singletons to capture attention if the singleton and distractors share features. The current study extends this finding to first-order motion targets and distractors, clearly separated in time by a visual cue (the letter X). Target motion discrimination was significantly impaired, a result attributed to the carry-over of distractor inhibition. Increasing the difficulty of cue detection increased the motion target impairment, as distractor inhibition is thought to increase under demanding (high load) conditions in order to maximize selection efficiency. The apparent conflict with studies reporting reduced distractor inhibition under high load conditions was resolved by distinguishing between the effects of "cognitive" and "perceptual" load. ((c) 2006 APA, all rights reserved).

Unstructured P2P Network Load Balance Strategy Based on Multilevel Partitioning of Hypergraph

NASA Astrophysics Data System (ADS)

Feng, Lv; Chunlin, Gao; Kaiyang, Ma

2017-05-01

With rapid development of computer performance and distributed technology, P2P-based resource sharing mode plays important role in Internet. P2P network users continued to increase so the high dynamic characteristics of the system determine that it is difficult to obtain the load of other nodes. Therefore, a dynamic load balance strategy based on hypergraph is proposed in this article. The scheme develops from the idea of hypergraph theory in multilevel partitioning. It adopts optimized multilevel partitioning algorithms to partition P2P network into several small areas, and assigns each area a supernode for the management and load transferring of the nodes in this area. In the case of global scheduling is difficult to be achieved, the priority of a number of small range of load balancing can be ensured first. By the node load balance in each small area the whole network can achieve relative load balance. The experiments indicate that the load distribution of network nodes in our scheme is obviously compacter. It effectively solves the unbalanced problems in P2P network, which also improve the scalability and bandwidth utilization of system.

250 kA compact linear transformer driver for wire array z-pinch loads

NASA Astrophysics Data System (ADS)

Bott, S. C.; Haas, D. M.; Madden, R. E.; Ueda, U.; Eshaq, Y.; Collins, G., IV; Gunasekera, K.; Mariscal, D.; Peebles, J.; Beg, F. N.; Mazarakis, M.; Struve, K.; Sharpe, R.

2011-05-01

We present the application of a short rise (˜150ns) 250 kA linear transformer driver (LTD) to wire array z-pinch loads for the first time. The generator is a modification of a previous driver in which a new conical power feed provides a low inductance coupling to wire loads. Performance of the new design using both short circuit and plasma loads is presented and discussed. The final design delivers ˜200kA to a wire array load which is in good agreement with SCREAMER calculations using a simplified representative circuit. Example results demonstrate successful experiments using cylindrical, conical, and inverse wire arrays as well as previously published work on x-pinch loads.

Helicopter rotor rotational noise predictions based on measured high-frequency blade loads

NASA Technical Reports Server (NTRS)

Hosier, R. N.; Ramakrishnan, R.

1974-01-01

In tests conducted at the Langley helicopter rotor test facility, simultaneous measurements of up to 200 harmonics of the fluctuating aerodynamic blade surface pressures and far-field radiated noise were made on a full-scale nontranslating rotor system. After their characteristics were determined, the measured blade surface pressures were converted to loading coefficients and used in an existing theory to predict the far-field rotational noise. A comparison of the calculated and measured noise shows generally good agreement up to 300 to 600 Hz, depending on the discreteness of the loading spectrum. Specific attention is given to the effects of the blade loading coefficients, chordwise loading distributions, blade loading phases, and observer azimuthal position on the calculations.

Bone Strength Estimated by Micro-Finite Element Analysis (µFEA) Is Heritable and Shares Genetic Predisposition With Areal BMD: The Framingham Study.

PubMed

Karasik, David; Demissie, Serkalem; Lu, Darlene; Broe, Kerry E; Boyd, Steven K; Liu, Ching-Ti; Hsu, Yi-Hsiang; Bouxsein, Mary L; Kiel, Douglas P

2017-11-01

Genetic factors contribute to the risk of bone fractures, partly because of effects on bone strength. High-resolution peripheral quantitative computed tomography (HR-pQCT) estimates bone strength using micro-finite element analysis (µFEA). The goal of this study was to investigate if the bone failure load estimated by HR-pQCT-based µFEA is heritable and to what extent it shares genetic regulation with areal bone mineral density (aBMD). Bone microarchitecture was measured by HR-pQCT at the ultradistal tibia and ultradistal radius in adults from the Framingham Heart Study (n = 1087, mean age 72 years; 57% women). Radial and tibial failure load in compression were estimated by µFEA. Femoral neck (FN) and ultradistal forearm (UD) aBMD were measured by dual-energy X-ray absorptiometry (DXA). Heritability (h 2 ) of failure load and aBMD and genetic correlations between them was estimated adjusting for covariates (age and sex). Failure load values at the non-weight-bearing ultradistal radius and at the weight-bearing ultradistal tibia were highly correlated (r = 0.906; p < 0.001). Estimates of h 2 adjusted for covariates were 0.522 for the radius and 0.497 for the tibia. Additional adjustment for height did not impact on the h 2 results, but adjustment for aBMD at the UD and FN somewhat decreased h 2 point estimates: 0.222 and 0.380 for radius and tibia, respectively. In bivariate analysis, there was a high phenotypic and genetic correlation between covariate-adjusted failure load at the radius and UD aBMD (ρ P  = 0.826, ρ G  = 0.954, respectively), whereas environmental correlations were lower (ρ E  = 0.696), all highly significant (p < 0.001). Similar correlations were observed between tibial failure load and femoral neck aBMD (ρ P  = 0.577, ρ G  = 0.703, both p < 0.001; ρ E  = 0.432, p < 0.05). These data from adult members of families from a population-based cohort suggest that bone strength of distal extremities estimated by micro-finite element analysis is heritable and shares some genetic composition with areal BMD, regardless of the skeletal site. © 2017 American Society for Bone and Mineral Research. © 2017 American Society for Bone and Mineral Research.

Effectiveness of barnyard best management practices in Wisconsin

USGS Publications Warehouse

Stuntebeck, Todd D.; Bannerman, Roger T.

1998-01-01

In 1978, the Wisconsin Legislature committed to protecting water quality by enacting the Nonpoint Source Water Pollution Abatement Program. Through this program, cost-share money is provided within priority watersheds to control sources of nonpoint pollution. Most of the cost-share dollars for rural watersheds have been used to implement barnyard Best Management Practices (BMPs) because barnyards are believed to be a major source of pollutants, most notably phosphorus. Reductions in phosphorus loads of as much as 95 percent have been predicted for the barnyard BMPs recommended for priority watersheds.

Color extended visual cryptography using error diffusion.

PubMed

Kang, InKoo; Arce, Gonzalo R; Lee, Heung-Kyu

2011-01-01

Color visual cryptography (VC) encrypts a color secret message into n color halftone image shares. Previous methods in the literature show good results for black and white or gray scale VC schemes, however, they are not sufficient to be applied directly to color shares due to different color structures. Some methods for color visual cryptography are not satisfactory in terms of producing either meaningless shares or meaningful shares with low visual quality, leading to suspicion of encryption. This paper introduces the concept of visual information pixel (VIP) synchronization and error diffusion to attain a color visual cryptography encryption method that produces meaningful color shares with high visual quality. VIP synchronization retains the positions of pixels carrying visual information of original images throughout the color channels and error diffusion generates shares pleasant to human eyes. Comparisons with previous approaches show the superior performance of the new method.

Perceived Benefits, Harms, and Views About How to Share Data Responsibly: A Qualitative Study of Experiences With and Attitudes Toward Data Sharing Among Research Staff and Community Representatives in Thailand.

PubMed

Cheah, Phaik Yeong; Tangseefa, Decha; Somsaman, Aimatcha; Chunsuttiwat, Tri; Nosten, François; Day, Nicholas P J; Bull, Susan; Parker, Michael

2015-07-01

The Thailand Major Overseas Programme coordinates large multi-center studies in tropical medicine and generates vast amounts of data. As the data sharing movement gains momentum, we wanted to understand attitudes and experiences of relevant stakeholders about what constitutes good data sharing practice. We conducted 15 interviews and three focus groups discussions involving 25 participants and found that they generally saw data sharing as something positive. Data sharing was viewed as a means to contribute to scientific progress and lead to better quality analysis, better use of resources, greater accountability, and more outputs. However, there were also important reservations including potential harms to research participants, their communities, and the researchers themselves. Given these concerns, several areas for discussion were identified: data standardization, appropriate consent models, and governance. © The Author(s) 2015.

Cyber security: a critical examination of information sharing versus data sensitivity issues for organisations at risk of cyber attack.

PubMed

Mallinder, Jason; Drabwell, Peter

Cyber threats are growing and evolving at an unprecedented rate.Consequently, it is becoming vitally important that organisations share information internally and externally before, during and after incidents they encounter so that lessons can be learned, good practice identified and new cyber resilience capabilities developed. Many organisations are reluctant to share such information for fear of divulging sensitive information or because it may be vague or incomplete. This provides organisations with a complex dilemma: how to share information as openly as possibly about cyber incidents, while protecting their confidentiality and focusing on service recovery from such incidents. This paper explores the dilemma of information sharing versus sensitivity and provides a practical overview of considerations every business continuity plan should address to plan effectively for information sharing in the event of a cyber incident.

Phase transition of social learning collectives and the echo chamber.

PubMed

Mori, Shintaro; Nakayama, Kazuaki; Hisakado, Masato

2016-11-01

We study a simple model for social learning agents in a restless multiarmed bandit. There are N agents, and the bandit has M good arms that change to bad with the probability q_{c}/N. If the agents do not know a good arm, they look for it by a random search (with the success probability q_{I}) or copy the information of other agents' good arms (with the success probability q_{O}) with probabilities 1-p or p, respectively. The distribution of the agents in M good arms obeys the Yule distribution with the power-law exponent 1+γ in the limit N,M→∞, and γ=1+(1-p)q_{I}/pq_{O}. The system shows a phase transition at p_{c}=q_{I}/q_{I}+q_{o}. For pp_{c}), the variance of N_{1} per agent is finite (diverges as ∝N^{2-γ} with N). There is a threshold value N_{s} for the system size that scales as lnN_{s}∝1/(γ-1). The expected value of the number of the agents with a good arm N_{1} increases with p for N>N_{s}. For p>p_{c} and N

Load-bearing masonry system adoption and performance: A case study of construction company in a developing country

NASA Astrophysics Data System (ADS)

Ramli, Nor Azlinda; Abdullah, Che Sobry; Nawi, Mohd Nasrun Mohd; Bahaudin, Ahmad Yusni

2016-08-01

This study addresses the factors that influence the adoption of load-bearing masonry (LBM) system. A case study of the load-bearing masonry (LBM) system adoption is conducted through an interview to explore the situation of the technology adoption in a construction company. The finding indicates the factors influence the adoption of LBM system for the construction company are: organizational resources, usefulness, less maintenance, reduce construction time and cost. From the findings, these factors consistent with previous literature. Furthermore, the performance of the company was measured by looking into the financial and non-financial aspects. The LBM system brings good performance as it increased the profits of the company, a good quality of product and attracts more demand from customers. Thus, these factors should be considered for the other companies that are interested in implementing the LBM system in their projects.

Estimating the R-curve from residual strength data

NASA Technical Reports Server (NTRS)

Orange, T. W.

1985-01-01

A method is presented for estimating the crack-extension resistance curve (R-curve) from residual-strength (maximum load against original crack length) data for precracked fracture specimens. The method allows additional information to be inferred from simple test results, and that information can be used to estimate the failure loads of more complicated structures of the same material and thickness. The fundamentals of the R-curve concept are reviewed first. Then the analytical basis for the estimation method is presented. The estimation method has been verified in two ways. Data from the literature (involving several materials and different types of specimens) are used to show that the estimated R-curve is in good agreement with the measured R-curve. A recent predictive blind round-robin program offers a more crucial test. When the actual failure loads are disclosed, the predictions are found to be in good agreement.

Exhaustive testing of recent oceanic and Earth tidal models using combination of tide gravity data from GGP and ICET data banks

NASA Astrophysics Data System (ADS)

Kopaev, A.; Ducarme, B.

2003-04-01

We have used the most recent oceanic tidal models e.g. FES’99/02, GOT’00, CSR’4, NAO’99 and TPXO’5/6 for tidal gravity loading computations using LOAD’97 software. Resulting loading vectors were compared against each other in different regions located at different distances from the sea coast. Results indicate good coincidence for majority of models at the distances larger than 100-200 km, excluding some regions where mostly CSR’4 and TPXO have problems. Outlying models were rejected for this regions and mean loading vectors have been calculated for more than 200 tidal gravity stations from GGP and ICET data banks, representing state of the art of tidal loading correction. Corresponding errors in d-factors and phase lags are generally smaller than 0.1 % resp. 0.05o, that means that we do not have the real troubles with loading corrections and more attention should be applied to the calibration values and phase lag determination accuracies. Corrected values agree with DDW model values very well (within 0.2 %) for majority of GGP stations, whereas some of very good (Chinese network mainly) ICET tidal gravity stations clearly demonstrate statistically significant (up to 0.5 %) anomalies that seems not connected either with calibration troubles or loading problems. Various possible reasons including instrumental and geophysical will be presented and discussed.

CERN data services for LHC computing

NASA Astrophysics Data System (ADS)

Espinal, X.; Bocchi, E.; Chan, B.; Fiorot, A.; Iven, J.; Lo Presti, G.; Lopez, J.; Gonzalez, H.; Lamanna, M.; Mascetti, L.; Moscicki, J.; Pace, A.; Peters, A.; Ponce, S.; Rousseau, H.; van der Ster, D.

2017-10-01

Dependability, resilience, adaptability and efficiency. Growing requirements require tailoring storage services and novel solutions. Unprecedented volumes of data coming from the broad number of experiments at CERN need to be quickly available in a highly scalable way for large-scale processing and data distribution while in parallel they are routed to tape for long-term archival. These activities are critical for the success of HEP experiments. Nowadays we operate at high incoming throughput (14GB/s during 2015 LHC Pb-Pb run and 11PB in July 2016) and with concurrent complex production work-loads. In parallel our systems provide the platform for the continuous user and experiment driven work-loads for large-scale data analysis, including end-user access and sharing. The storage services at CERN cover the needs of our community: EOS and CASTOR as a large-scale storage; CERNBox for end-user access and sharing; Ceph as data back-end for the CERN OpenStack infrastructure, NFS services and S3 functionality; AFS for legacy distributed-file-system services. In this paper we will summarise the experience in supporting LHC experiments and the transition of our infrastructure from static monolithic systems to flexible components providing a more coherent environment with pluggable protocols, tuneable QoS, sharing capabilities and fine grained ACLs management while continuing to guarantee dependable and robust services.

On the Relations among Regular, Equal Unique Variances, and Image Factor Analysis Models.

ERIC Educational Resources Information Center

Hayashi, Kentaro; Bentler, Peter M.

2000-01-01

Investigated the conditions under which the matrix of factor loadings from the factor analysis model with equal unique variances will give a good approximation to the matrix of factor loadings from the regular factor analysis model. Extends the results to the image factor analysis model. Discusses implications for practice. (SLD)

Tensile and fatigue behavior of polymer composites reinforced with superelastic SMA strands

NASA Astrophysics Data System (ADS)

Daghash, Sherif M.; Ozbulut, Osman E.

2018-06-01

This study explores the use of superelastic shape memory alloy (SMA) strands, which consist of seven individual small-diameter wires, in an epoxy matrix and characterizes the tensile and fatigue responses of the developed SMA/epoxy composites. Using a vacuum assisted hand lay-up technique, twelve SMA fiber reinforced polymer (FRP) specimens were fabricated. The developed SMA-FRP composites had a fiber volume ratio of 50%. Tensile response of SMA-FRP specimens were characterized under both monotonic loading and increasing amplitude loading and unloading cycles. The degradation in superelastic properties of the developed SMA-FRP composites during fatigue loading at different strain amplitudes was investigated. The effect of loading rate on the fatigue response of SMA-FRP composites was also explored. In addition, fractured specimens were examined using the scanning electron microscopy (SEM) technique to study the failure mechanisms of the tested specimens. A good interfacial bonding between the SMA strands and epoxy matrix was observed. The developed SMA-FRP composites exhibited good superelastic behavior at different strain amplitudes up to at least 800 cycle after which significant degradation occurred.

Force sharing in high-power parallel servo-actuators

NASA Technical Reports Server (NTRS)

Neal, T. P.

1974-01-01

The various existing force sharing schemes were examined by conducting a literature survey. A list of potentially applicable concepts was compiled from this survey, and a brief analysis was then made of each concept, which resulted in two competing schemes being selected for in-depth evaluation. A functional design of the equalization logic for the two schemes was undertaken and specific space shuttle application was chosen for experimental evaluation. The application was scaled down so that existing hardware could be utilized. Next, an analog computer study was conducted to evaluate the more important characteristics of the two competing force sharing schemes. On the basis of the computers study, a final configuration was selected. A load simulator was then designed to evaluate this configuration on actual hardware.

Bifactor Modeling of the Positive and Negative Syndrome Scale: Generalized Psychosis Spans Schizoaffective, Bipolar, and Schizophrenia Diagnoses.

PubMed

Anderson, Ariana E; Marder, Stephen; Reise, Steven P; Savitz, Adam; Salvadore, Giacomo; Fu, Dong Jing; Li, Qingqin; Turkoz, Ibrahim; Han, Carol; Bilder, Robert M

2018-02-06

Common genetic variation spans schizophrenia, schizoaffective and bipolar disorders, but historically, these syndromes have been distinguished categorically. A symptom dimension shared across these syndromes, if such a general factor exists, might provide a clearer target for understanding and treating mental illnesses that share core biological bases. We tested the hypothesis that a bifactor model of the Positive and Negative Syndrome Scale (PANSS), containing 1 general factor and 5 specific factors (positive, negative, disorganized, excited, anxiety), explains the cross-diagnostic structure of symptoms better than the traditional 5-factor model, and examined the extent to which a general factor reflects the overall severity of symptoms spanning diagnoses in 5094 total patients with a diagnosis of schizophrenia, schizoaffective, and bipolar disorder. The bifactor model provided superior fit across diagnoses, and was closer to the "true" model, compared to the traditional 5-factor model (Vuong test; P < .001). The general factor included high loadings on 28 of the 30 PANSS items, omitting symptoms associated with the excitement and anxiety/depression domains. The general factor had highest total loadings on symptoms that are often associated with the positive and disorganization syndromes, but there were also substantial loadings on the negative syndrome thus leading to the interpretation of this factor as reflecting generalized psychosis. A bifactor model derived from the PANSS can provide a stronger framework for measuring cross-diagnostic psychopathology than a 5-factor model, and includes a generalized psychosis dimension shared at least across schizophrenia, schizoaffective, and bipolar disorder. © The Author(s) 2018. Published by Oxford University Press on behalf of the Maryland Psychiatric Research Center. All rights reserved. For permissions, please email: journals.permissions@oup.com

Principles of Good Practice in SoTL

ERIC Educational Resources Information Center

Felten, Peter

2013-01-01

For the Scholarship of Teaching and Learning (SoTL) to be understood as significant intellectual work in the academy, SoTL practitioners need to identify shared principles of good practice. While honoring the diversity of SoTL in its many forms across the globe, such principles can serve as a heuristic for assessing work in our field. These…

Transforming a School Learning Exercise into a Public Engagement Event: "The Good, the Bad and the Algae"

ERIC Educational Resources Information Center

Redfern, James; Burdass, Dariel; Verran, Joanna

2013-01-01

School science laboratory classes and hands-on public engagement activities share many common aims and objectives in terms of science learning and literacy. This article describes the development and evaluation of a microbiology public engagement activity, "The Good, the Bad and the Algae", from a school laboratory activity. The school…

10 Good Ways to Ensure Bad Professional Learning

ERIC Educational Resources Information Center

Thomas, Laura R.

2013-01-01

The author spends a lot of time thinking about good professional learning vs. typical professional development. Based on her 20-plus years of experience, as well as a bit of inspiration from Reuben Duncan, assistant superintendent in School Administrative Unit 29 in Keene, N.H., she shares what she considers to be the ten best ways to waste…

Sharing Good Practice: Prevention and Support Concerning Pupils Presenting Social, Emotional and Behavioural Difficulties.

ERIC Educational Resources Information Center

Lloyd, Gwynedd, Ed.; Munn, Pamela, Ed.

This book is the result of a project to identify and disseminate examples of good practice in providing for children experiencing social, emotional, and behavioral difficulties in schools. The focus is on whole-school or classroom approaches to mainstreaming with experience from teachers of preschool to secondary grades. A major theme is providing…

Interagency and Multinational Information Sharing Architecture and Solutions (IMISAS) Project

DTIC Science & Technology

2012-02-01

Defense (DOD) Enterprise Unclassified Information Sharing Service, August 10, 2010 12 Lindenmayer, Martin J. Civil Information and Intelligence Fusion...Organizations (1:2), 44-65. Lindenmayer, Martin J. Civil Information and Intelligence Fusion: Making “Non-Traditional” into “New Traditional” for...perceived as a good start which needs more development. References [Badke-Schaub et al. 2008] Badke-Schaub, Petra ; Hofinger, Gesine; Lauche

Approaching a Sacred Song: Toward a Respectful Presentation of the Discourse we Study

ERIC Educational Resources Information Center

Palmer, Andie Diane

2007-01-01

Educators who focus on American Indian or First Nations languages often have the privilege of bringing tape recordings of songs and stories to their students in the classroom. Learning the protocols for such sharing of the treasured gifts of ancestors is made easier by the good examples of teachers in and out of the classroom, who share such gifts…

Barriers and enablers to good communication and information-sharing practices in care planning for chronic condition management.

PubMed

Lawn, Sharon; Delany, Toni; Sweet, Linda; Battersby, Malcolm; Skinner, Timothy

2015-01-01

Our aim was to document current communication and information-sharing practices and to identify the barriers and enablers to good practices within the context of care planning for chronic condition management. Further aims were to make recommendations about how changes to policy and practice can improve communication and information sharing in primary health care. A mixed-method approach was applied to seek the perspectives of patients and primary health-care workers across Australia. Data was collected via interviews, focus groups, non-participant observations and a national survey. Data analysis was performed using a mix of thematic, discourse and statistical approaches. Central barriers to effective communication and information sharing included fragmented communication, uncertainty around client and interagency consent, and the unacknowledged existence of overlapping care plans. To be most effective, communication and information sharing should be open, two-way and inclusive of all members of health-care teams. It must also only be undertaken with the appropriate participant consent, otherwise this has the potential to cause patients harm. Improvements in care planning as a communication and information-sharing tool may be achieved through practice initiatives that reflect the rhetoric of collaborative person-centred care, which is already supported through existing policy in Australia. General practitioners and other primary care providers should operationalise care planning, and the expectation of collaborative and effective communication of care that underpins it, within their practice with patients and all members of the care team. To assist in meeting these aims, we make several recommendations.

Heavy metal transport in large river systems: heavy metal emissions and loads in the Rhine and Elbe river basins

NASA Astrophysics Data System (ADS)

Vink, Rona; Behrendt, Horst

2002-11-01

Pollutant transport and management in the Rhine and Elbe basins is still of international concern, since certain target levels set by the international committees for protection of both rivers have not been reached. The analysis of the chain of emissions of point and diffuse sources to river loads will provide policy makers with a tool for effective management of river basins. The analysis of large river basins such as the Elbe and Rhine requires information on the spatial and temporal characteristics of both emissions and physical information of the entire river basin. In this paper, an analysis has been made of heavy metal emissions from various point and diffuse sources in the Rhine and Elbe drainage areas. Different point and diffuse pathways are considered in the model, such as inputs from industry, wastewater treatment plants, urban areas, erosion, groundwater, atmospheric deposition, tile drainage, and runoff. In most cases the measured heavy metal loads at monitoring stations are lower than the sum of the heavy metal emissions. This behaviour in large river systems can largely be explained by retention processes (e.g. sedimentation) and is dependent on the specific runoff of a catchment. Independent of the method used to estimate emissions, the source apportionment analysis of observed loads was used to determine the share of point and diffuse sources in the heavy metal load at a monitoring station by establishing a discharge dependency. The results from both the emission analysis and the source apportionment analysis of observed loads were compared and gave similar results. Between 51% (for Hg) and 74% (for Pb) of the total transport in the Elbe basin is supplied by inputs from diffuse sources. In the Rhine basin diffuse source inputs dominate the total transport and deliver more than 70% of the total transport. The diffuse hydrological pathways with the highest share are erosion and urban areas.

The ethics of good communication in a complex research partnership.

PubMed

Sodeke, Stephen; Turner, Timothy; Tarver, Will

2010-08-01

The tripartite partnership among Morehouse School of Medicine, Tuskegee University, and University of Alabama at Birmingham is complex. In 2005, the three schools--with different institutional cultures, characters, and resources--agreed to collaborate in efforts to eliminate racial/ethnic disparities in cancer burdens. Pursuing this laudable aim predictably involved some miscommunication. The Bioethics Shared Resource (BSR) group foresaw such challenges and monitored interactions to prevent harm, noting that while effective communication is critical to the achievement of mutual goals, an understanding and prudent use of proven communication principles is a sine qua non for success. In this commentary, we share the undergirding moral concepts, communication approaches, and lessons learned. This experience has led us to propose an ethics of good communication for others to consider.

A High-Sensitivity Hydraulic Load Cell for Small Kitchen Appliances

PubMed Central

Pačnik, Roman; Novak, Franc

2010-01-01

In this paper we present a hydraulic load cell made from hydroformed metallic bellows. The load cell was designed for a small kitchen appliance with the weighing function integrated into the composite control and protection of the appliance. It is a simple, low-cost solution with small dimensions and represents an alternative to the existing hydraulic load cells in industrial use. A good non-linearity and a small hysteresis were achieved. The influence of temperature leads to an error of 7.5%, which can be compensated for by software to meet the requirements of the target application. PMID:22163665

A high-sensitivity hydraulic load cell for small kitchen appliances.

PubMed

Pačnik, Roman; Novak, Franc

2010-01-01

In this paper we present a hydraulic load cell made from hydroformed metallic bellows. The load cell was designed for a small kitchen appliance with the weighing function integrated into the composite control and protection of the appliance. It is a simple, low-cost solution with small dimensions and represents an alternative to the existing hydraulic load cells in industrial use. A good non-linearity and a small hysteresis were achieved. The influence of temperature leads to an error of 7.5%, which can be compensated for by software to meet the requirements of the target application.

Distinct and shared cognitive functions mediate event- and time-based prospective memory impairment in normal ageing

PubMed Central

Gonneaud, Julie; Kalpouzos, Grégoria; Bon, Laetitia; Viader, Fausto; Eustache, Francis; Desgranges, Béatrice

2011-01-01

Prospective memory (PM) is the ability to remember to perform an action at a specific point in the future. Regarded as multidimensional, PM involves several cognitive functions that are known to be impaired in normal aging. In the present study, we set out to investigate the cognitive correlates of PM impairment in normal aging. Manipulating cognitive load, we assessed event- and time-based PM, as well as several cognitive functions, including executive functions, working memory and retrospective episodic memory, in healthy subjects covering the entire adulthood. We found that normal aging was characterized by PM decline in all conditions and that event-based PM was more sensitive to the effects of aging than time-based PM. Whatever the conditions, PM was linked to inhibition and processing speed. However, while event-based PM was mainly mediated by binding and retrospective memory processes, time-based PM was mainly related to inhibition. The only distinction between high- and low-load PM cognitive correlates lays in an additional, but marginal, correlation between updating and the high-load PM condition. The association of distinct cognitive functions, as well as shared mechanisms with event- and time-based PM confirms that each type of PM relies on a different set of processes. PMID:21678154

A Powerful Approach to Estimating Annotation-Stratified Genetic Covariance via GWAS Summary Statistics.

PubMed

Lu, Qiongshi; Li, Boyang; Ou, Derek; Erlendsdottir, Margret; Powles, Ryan L; Jiang, Tony; Hu, Yiming; Chang, David; Jin, Chentian; Dai, Wei; He, Qidu; Liu, Zefeng; Mukherjee, Shubhabrata; Crane, Paul K; Zhao, Hongyu

2017-12-07

Despite the success of large-scale genome-wide association studies (GWASs) on complex traits, our understanding of their genetic architecture is far from complete. Jointly modeling multiple traits' genetic profiles has provided insights into the shared genetic basis of many complex traits. However, large-scale inference sets a high bar for both statistical power and biological interpretability. Here we introduce a principled framework to estimate annotation-stratified genetic covariance between traits using GWAS summary statistics. Through theoretical and numerical analyses, we demonstrate that our method provides accurate covariance estimates, thereby enabling researchers to dissect both the shared and distinct genetic architecture across traits to better understand their etiologies. Among 50 complex traits with publicly accessible GWAS summary statistics (N total ≈ 4.5 million), we identified more than 170 pairs with statistically significant genetic covariance. In particular, we found strong genetic covariance between late-onset Alzheimer disease (LOAD) and amyotrophic lateral sclerosis (ALS), two major neurodegenerative diseases, in single-nucleotide polymorphisms (SNPs) with high minor allele frequencies and in SNPs located in the predicted functional genome. Joint analysis of LOAD, ALS, and other traits highlights LOAD's correlation with cognitive traits and hints at an autoimmune component for ALS. Copyright © 2017 American Society of Human Genetics. Published by Elsevier Inc. All rights reserved.

Good Samaritans in Networks: An Experiment on How Networks Influence Egalitarian Sharing and the Evolution of Inequality

PubMed Central

Chiang, Yen-Sheng

2015-01-01

The fact that the more resourceful people are sharing with the poor to mitigate inequality—egalitarian sharing—is well documented in the behavioral science research. How inequality evolves as a result of egalitarian sharing is determined by the structure of “who gives whom”. While most prior experimental research investigates allocation of resources in dyads and groups, the paper extends the research of egalitarian sharing to networks for a more generalized structure of social interaction. An agent-based model is proposed to predict how actors, linked in networks, share their incomes with neighbors. A laboratory experiment with human subjects further shows that income distributions evolve to different states in different network topologies. Inequality is significantly reduced in networks where the very rich and the very poor are connected so that income discrepancy is salient enough to motivate the rich to share their incomes with the poor. The study suggests that social networks make a difference in how egalitarian sharing influences the evolution of inequality. PMID:26061642

The Comprehensive Benefit Evaluation of Take Shared Bicycles as Connecting to Public Transit

NASA Astrophysics Data System (ADS)

Zhang, J. Y.; Sun, H.; Li, P. F.; Li, C. C.

2017-10-01

Shared bicycles as an important way of connecting public transport, have few literature to evaluate its effectiveness.This paper taking Beijing city as an example, make anevaluationfor the six types of travel combinations which are commonly used by the citizens. The author selects four quantitative indicators: fuel consumption, economic cost, total time spent, and CO2 emission. And two qualitative indicators: degree of comfort and convenience. The relative efficiency of quantitative indicators is obtained by data envelopment analysis (DEA) and fuzzification and then take fuzzy synthetic evaluation with qualitative indicators.It was found that the choice of shared bicycles +subway+ shared bicycles and shared bicycles has good comprehensive benefits in medium distance travel. The findings also suggest that shared bicycles +subway+ shared bicycles is the best choice in the utilitarian trips. The conclusions not only provide suggestions for the travellers to select travel modes, but also can adjust the relevant factors to increase the proportion of green travel.

29 CFR 551.8 - Definitions.

Code of Federal Regulations, 2010 CFR

2010-07-01

... as picking up and returning the delivery vehicle at the beginning and end of the workday, cleaning... in loading or unloading the goods, and picking up empty containers or other goods from customers for... local deliveries. (f) A plan of compensation on the basis of trip rates or other delivery payment plan...

48 CFR 52.247-23 - Contractor Liability for Loss of and/or Damage to Household Goods.

Code of Federal Regulations, 2010 CFR

2010-10-01

... to the owner for the loss of and/or damage to any article while being— (1) Packed, picked up, loaded... indemnify the owner of the goods at a rate of _ cents per pound per article. (End of clause) [48 FR 42478...

Reciprocal Tutoring: Design with Cognitive Load Sharing

ERIC Educational Resources Information Center

Chou, Chih-Yueh; Chan, Tak-Wai

2016-01-01

"Reciprocal tutoring," as reported in "Exploring the design of computer supports for reciprocal tutoring" (Chan and Chou 1997), has extended the meaning and scope of "intelligent tutoring" originally implemented in stand alone computers. This research is a follow-up to our studies on a "learning companion…

NORTHEAST LOON STUDY WORKING GROUP PARTNERSHIP TO ASSESS ENVIRONMENTAL RISK

EPA Science Inventory

The Northeast Loon Study Working Group (NELSWG) was formed in 1994 to proactively identify threats to one of the Northeast's most popular waterbirds, the common loon, Gavia immer. Seventeen institutions have come together to identify strategy, coordinate the work load, and share ...

"Job-Sharing" Storage of Hydrogen in Ru/Li₂O Nanocomposites.

PubMed

Fu, Lijun; Tang, Kun; Oh, Hyunchul; Manickam, Kandavel; Bräuniger, Thomas; Chandran, C Vinod; Menzel, Alexander; Hirscher, Michael; Samuelis, Dominik; Maier, Joachim

2015-06-10

A "job-sharing" hydrogen storage mechanism is proposed and experimentally investigated in Ru/Li2O nanocomposites in which H(+) is accommodated on the Li2O side, while H(-) or e(-) is stored on the side of Ru. Thermal desorption-mass spectroscopy results show that after loading with D2, Ru/Li2O exhibits an extra desorption peak, which is in contrast to Ru nanoparticles or ball-milled Li2O alone, indicating a synergistic hydrogen storage effect due to the presence of both phases. By varying the ratio of the two phases, it is shown that the effect increases monotonically with the area of the heterojunctions, indicating interface related hydrogen storage. X-ray diffraction, Fourier transform infrared spectroscopy, and nuclear magnetic resonance results show that a weak LiO···D bond is formed after loading in Ru/Li2O nanocomposites with D2. The storage-pressure curve seems to favor H(+)/H(-) over H(+)/e(-) mechanism.

Data traffic reduction schemes for sparse Cholesky factorizations

NASA Technical Reports Server (NTRS)

Naik, Vijay K.; Patrick, Merrell L.

1988-01-01

Load distribution schemes are presented which minimize the total data traffic in the Cholesky factorization of dense and sparse, symmetric, positive definite matrices on multiprocessor systems with local and shared memory. The total data traffic in factoring an n x n sparse, symmetric, positive definite matrix representing an n-vertex regular 2-D grid graph using n (sup alpha), alpha is equal to or less than 1, processors are shown to be O(n(sup 1 + alpha/2)). It is O(n(sup 3/2)), when n (sup alpha), alpha is equal to or greater than 1, processors are used. Under the conditions of uniform load distribution, these results are shown to be asymptotically optimal. The schemes allow efficient use of up to O(n) processors before the total data traffic reaches the maximum value of O(n(sup 3/2)). The partitioning employed within the scheme, allows a better utilization of the data accessed from shared memory than those of previously published methods.

CE dual-homing protection in layer 1 VPN

NASA Astrophysics Data System (ADS)

Du, Shu; Peng, Yunfeng; Long, Keping

2008-11-01

Layer 1 VPN (L1VPN) extends the notion of VPN to the optical domain to provide virtually dedicated circuit like leased lines, so that the security is more enhanced. Despite their secure gains from channel isolation, VPNs still suffer fragilities resulting from link-failures or node-failures. Extensive activities on survivability designs for wavelength-routed optical networks are proposed, including various protection and restoration schemes, but concerns on network edge are rare. Dual-homing is an effective skill to achieve survivability gains for L1VPNs. There are two dual-homing mode: Active/Standby mode and Load-Sharing mode In this paper, we investigate the problem of PE assignment, which is the key of dual-homing design and is NP-hard. We formulate it as an integer programming problem, and propose heuristic solutions. Simulation results show that the proposed solutions work in a correct and effective way and the Load-Sharing mode has higher bandwidth efficiency than Active/Standby mode.

A constitutive model for AS4/PEEK thermoplastic composites under cyclic loading

NASA Technical Reports Server (NTRS)

Rui, Yuting; Sun, C. T.

1990-01-01

Based on the basic and essential features of the elastic-plastic response of the AS4/PEEK thermoplastic composite subjected to off-axis cyclic loadings, a simple rate-independent constitutive model is proposed to describe the orthotropic material behavior for cyclic loadings. A one-parameter memory surface is introduced to distinguish the virgin deformation and the subsequent deformation process and to characterize the loading range effect. Cyclic softening is characterized by the change of generalized plastic modulus. By the vanishing yield surface assumption, a yield criterion is not needed and it is not necessary to consider loading and unloading separately. The model is compared with experimental results and good agreement is obtained.

Visual short-term memory load strengthens selective attention.

PubMed

Roper, Zachary J J; Vecera, Shaun P

2014-04-01

Perceptual load theory accounts for many attentional phenomena; however, its mechanism remains elusive because it invokes underspecified attentional resources. Recent dual-task evidence has revealed that a concurrent visual short-term memory (VSTM) load slows visual search and reduces contrast sensitivity, but it is unknown whether a VSTM load also constricts attention in a canonical perceptual load task. If attentional selection draws upon VSTM resources, then distraction effects-which measure attentional "spill-over"-will be reduced as competition for resources increases. Observers performed a low perceptual load flanker task during the delay period of a VSTM change detection task. We observed a reduction of the flanker effect in the perceptual load task as a function of increasing concurrent VSTM load. These findings were not due to perceptual-level interactions between the physical displays of the two tasks. Our findings suggest that perceptual representations of distractor stimuli compete with the maintenance of visual representations held in memory. We conclude that access to VSTM determines the degree of attentional selectivity; when VSTM is not completely taxed, it is more likely for task-irrelevant items to be consolidated and, consequently, affect responses. The "resources" hypothesized by load theory are at least partly mnemonic in nature, due to the strong correspondence they share with VSTM capacity.

Recommendations on Model Fidelity for Wind Turbine Gearbox Simulations; NREL (National Renewable Energy Laboratory)

DOE Office of Scientific and Technical Information (OSTI.GOV)

Keller, J.; Lacava, W.; Austin, J.

2015-02-01

This work investigates the minimum level of fidelity required to accurately simulate wind turbine gearboxes using state-of-the-art design tools. Excessive model fidelity including drivetrain complexity, gearbox complexity, excitation sources, and imperfections, significantly increases computational time, but may not provide a commensurate increase in the value of the results. Essential designparameters are evaluated, including the planetary load-sharing factor, gear tooth load distribution, and sun orbit motion. Based on the sensitivity study results, recommendations for the minimum model fidelities are provided.

Idiopathic pulmonary fibrosis

MedlinePlus

... a support group. Sharing with others who have common experiences and problems can help you not feel alone. These organizations are good resources for information on lung disease: American Lung ...

Cooperative investment in public goods is kin directed in communal nests of social birds

PubMed Central

van Dijk, René E; Kaden, Jennifer C; Argüelles-Ticó, Araceli; Dawson, Deborah A; Burke, Terry; Hatchwell, Ben J

2014-01-01

The tragedy of the commons predicts social collapse when public goods are jointly exploited by individuals attempting to maximize their fitness at the expense of other social group members. However, animal societies have evolved many times despite this vulnerability to exploitation by selfish individuals. Kin selection offers a solution to this social dilemma, but in large social groups mean relatedness is often low. Sociable weavers (Philetairus socius) live in large colonies that share the benefits of a massive communal nest, which requires individual investment for construction and maintenance. Here, we show that despite low mean kinship within colonies, relatives are spatially and socially clustered and that nest-building males have higher local relatedness to other colony members than do non-building males. Alternative hypotheses received little support, so we conclude that the benefits of the public good are shared with kin and that cooperative investment is, despite the large size and low relatedness of these communities, kin directed. PMID:25039999

Global Anthropogenic Phosphorus Loads to Fresh Water, Grey Water Footprint and Water Pollution Levels: A High-Resolution Global Study

NASA Astrophysics Data System (ADS)

Mekonnen, M. M.; Hoekstra, A. Y. Y.

2014-12-01

We estimated anthropogenic phosphorus (P) loads to freshwater, globally at a spatial resolution level of 5 by 5 arc minute. The global anthropogenic P load to freshwater systems from both diffuse and point sources in the period 2002-2010 was 1.5 million tonnes per year. China contributed about 30% to this global anthropogenic P load. India was the second largest contributor (8%), followed by the USA (7%), Spain and Brazil each contributing 6% to the total. The domestic sector contributed the largest share (54%) to this total followed by agriculture (38%) and industry (8%). Among the crops, production of cereals had the largest contribution to the P loads (32%), followed by fruits, vegetables, and oil crops, each contributing about 15% to the total. We also calculated the resultant grey water footprints, and relate the grey water footprints per river basin to runoff to calculate the P-related water pollution level (WPL) per catchment.

Testing of a Miniature Loop Heat Pipe with Multiple Evaporators and Multiple Condensers for Space Applications

NASA Technical Reports Server (NTRS)

Nagano, Hosei; Ku, Jentung

2006-01-01

Thermal performance of a miniature loop heat pipe (MLHP) with two evaporators and two condensers is described. A comprehensive test program, including start-up, high power, low power, power cycle, and sink temperature cycle tests, has been executed at NASA Goddard Space Flight Center for potential space applications. Experimental data showed that the loop could start with heat loads as low as 2W. The loop operated stably with even and uneven evaporator heat loads, and even and uneven condenser sink temperatures. Heat load sharing between the two evaporators was also successfully demonstrated. The loop had a heat transport capability of l00W to 120W, and could recover from a dry-out by reducing the heat load to evaporators. Low power test results showed the loop could work stably for heat loads as low as 1 W to each evaporator. Excellent adaptability of the MLHP to rapid changes of evaporator power and sink temperature were also demonstrated.

Biomechanical comparison of effects of the Dynesys and Coflex dynamic stabilization systems on range of motion and loading characteristics in the lumbar spine: a finite element study.

PubMed

Kulduk, Ahmet; Altun, Necdet S; Senkoylu, Alpaslan

2015-12-01

The primary purpose of dynamic stabilization is to preserve the normal range of motion (ROM) by restricting abnormal movement in the spine. Our aim was to analyze the effects of two different dynamic stabilization systems using finite element modeling (FEM). Coflex and Dynesys dynamic devices were modeled and implanted at the L4-L5 segment using virtual FEM. A 400 N compressive force combined with 6 N flexion, extension, bending and axial rotation forces was applied to the L3-4 and L4-5 segments. ROM and disc loading forces were analyzed. Both systems reduced ROM and disc loading forces at the implanted lumbar segment, with the exception of the Coflex interspinous device, which increased ROM by 19% and did not change disc-loading forces in flexion. The Coflex device prevented excessive disc loading, but increased ROM abnormally in flexion. Neither device provided satisfactory motion preservation or load sharing in other directions. Copyright © 2015 John Wiley & Sons, Ltd.

Managers' duty to maintain good workplace communications skills.

PubMed

Timmins, Fiona

2011-06-01

Communication is a fundamental element of care at every level of nursing practice. It is important, therefore, for nurse managers to create environments that promote and encourage good communication, and help nurses to develop their communication skills formally and informally. This article discusses the effects of communication on the quality of care. It examines nurses' professional duty to maintain good communication skills and how managers can help them do this. It also discusses nurse managers' communication skills in the context of leadership style, conflict resolution and self-awareness. Finally, it considers the notion of shared governance as good practice.

The role of moral emotions in the development of children's sharing behavior.

PubMed

Ongley, Sophia F; Malti, Tina

2014-04-01

This study investigated the role of moral emotions in the development of children's sharing behavior (N = 244 4-, 8-, and 12-year-old children). Children's sympathy was measured with both self- and primary caregiver-reports, and participants anticipated their negatively and positively valenced moral emotions (i.e., feeling guilty, sad, or bad; and feeling proud, happy, or good) following actions that either violated or upheld moral norms. Sharing was measured through children's allocation of resources in the dictator game. Children's self-reported sympathy emerged as a significant predictor of sharing in early childhood. For children with low levels of sympathy, sharing was also predicted by negatively valenced moral emotions following the failure to perform prosocial actions. In addition, results demonstrated an age-related increase in sharing for boys between ages 4 and 8 and a decrease in sharing for boys between ages 8 and 12. We discuss the findings in relation to the emergence of 2 compensatory emotional pathways to sharing, 1 via sympathy and 1 via negatively valenced moral emotions. PsycINFO Database Record (c) 2014 APA, all rights reserved.

(LBA-and-WRM)-based DBA scheme for multi-wavelength upstream transmission supporting 10 Gbps and 1 Gbps in MAN

NASA Astrophysics Data System (ADS)

Zhang, Yuchao; Gan, Chaoqin; Gou, Kaiyu; Xu, Anni; Ma, Jiamin

2018-01-01

DBA scheme based on Load balance algorithm (LBA) and wavelength recycle mechanism (WRM) for multi-wavelength upstream transmission is proposed in this paper. According to 1 Gbps and 10 Gbps line rates, ONUs are grouped into different VPONs. To facilitate wavelength management, resource pool is proposed to record wavelength state. To realize quantitative analysis, a mathematical model describing metro-access network (MAN) environment is presented. To 10G-EPON upstream, load balance algorithm is designed to ensure load distribution fairness for 10G-OLTs. To 1G-EPON upstream, wavelength recycle mechanism is designed to share remained wavelengths. Finally, the effectiveness of the proposed scheme is demonstrated by simulation and analysis.

The Relationship Between Training Load and Injury in Athletes: A Systematic Review.

PubMed

Eckard, Timothy G; Padua, Darin A; Hearn, Darren W; Pexa, Brett S; Frank, Barnett S

2018-06-26

The relationship between training load and musculoskeletal injury is a rapidly advancing area of research in need of an updated systematic review. This systematic review examined the evidence for the relationship between training load and musculoskeletal injury risk in athlete, military, and first responder (i.e. law enforcement, firefighting, rescue service) populations. The CINAHL, EMBASE, MEDLINE, SportDISCUS, and SCOPUS databases were searched using a comprehensive strategy. Studies published prior to July 2017 were included if they prospectively examined the relationship between training load and injury risk. Study quality was assessed using the Newcastle-Ottawa Quality Assessment Scale (NOS) and Oxford Centre for Evidence-Based Medicine levels of evidence. A narrative synthesis of findings was conducted. A total of 2047 articles were examined for potential inclusion. Forty-six met the inclusion criteria and 11 known to the authors but not found in the search were added, for a total of 57 articles. Overall, 47 studies had at least partially statistically significant results, demonstrating a relationship between training load and injury risk. Included articles were rated as poor (n = 15), fair (n = 6), and good (n = 36) based on NOS score. Articles assessed as 'good' were considered level 2b evidence on the Oxford Centre for Evidence-Based Medicine Model, and articles assessed as 'fair' or 'poor' were considered level 4 evidence. Our results demonstrate that the existence of a relationship between training load and injury continues to be well supported in the literature and is strongest for subjective internal training load. The directionality of this relationship appears to depend on the type and timeframe of load measured.

Evaluation of active control technology for short haul aircraft. [cost effectiveness

NASA Technical Reports Server (NTRS)

Renshaw, J. H.; Bennett, J. A.; Harris, O. C.; Honrath, J. F.; Patterson, R. W.

1975-01-01

An evaluation of the economics of short-haul aircraft designed with active controls technology and low wing-loading to achieve short field performance with good ride quality is presented. Results indicate that for such a system incorporating gust load alleviation and augmented stability the direct operating cost is better than for aircraft without active controls.

Standardization of Performance Tests: A Proposal for Further Steps.

DTIC Science & Technology

1986-07-01

obviously demand substantial attention can sometimes be time shared perfectly. Wickens describes cases in which skilled pianists can time share sight-reading...effects of divided attention on information processing in tracking. Journal of Experimental Psychology, 1, 1-13. Wickens, C.D. (1984). Processing resources... attention he regards focused- divided attention tasks (e.g. dichotic listening, dual task situations) as theoretically useful. From his point of view good

Failure to capitalize on sharing good news with romantic partners: Exploring positivity deficits of socially anxious people with self-reports, partner-reports, and behavioral observations☆

PubMed Central

Kashdan, Todd B.; Ferssizidis, Patty; Farmer, Antonina S.; Adams, Leah M.; McKnight, Patrick E.

2013-01-01

Extending prior work on social anxiety and positivity deficits, we examined whether individual differences in social anxiety alter the ability to share and respond to the good news of romantic partners (i.e., capitalization support) and how this influences romantic relationship satisfaction and commitment. In this study of 174 heterosexual couples (average age of 21.5 with 58.3% identifying as Caucasian), greater social anxiety was associated with the provision and receipt of less supportive responses to shared positive events as measured by trait questionnaires, partner reports, and behavioral observations in the laboratory. In longitudinal analyses, individuals in romantic relationships with socially anxious partners who experienced inadequate capitalization support were more likely to terminate their relationship and report a decline in relationship quality six months later. As evidence of construct specificity, social anxiety effects were independent of depressive symptoms. Taken together, social anxiety influenced a person's ability to receive and provide support for shared positive events; these deficits had adverse romantic consequences. Researchers and clinicians may better understand social anxiety by exploring a wider range of interpersonal contexts and positive constructs. The addition of capitalization support to the social anxiety literature offers new insights into interpersonal approaches and treatments. PMID:23916635

Who Sleeps by Whom Revisited: A Method for Extracting the Moral Goods Implicit in Practice.

ERIC Educational Resources Information Center

Schweder, Richard A; And Others

1995-01-01

Explores the specific family practice of determining which family members share a bed or sleeping space. Discusses ways of extracting the moral principles implicit in the practice of arranging where family members sleep at night. Examines similarities and differences in the preferred moral goods of two culture regions--rural Hindu India and urban…

Should Researchers Protect the Good Name and Reputation of Institutions in Which Research Is Done?

ERIC Educational Resources Information Center

Uys, L. R.

2008-01-01

The article explores the issue of protecting the good name and reputation of institutions and organisations in which research is being done. It explores current ethical codes in this regard, as well as legal provision for such protection. The issue of balancing the right of the researchers to share information about institutions in which research…

Selection of the distributional rule as an alternative tool to foster cooperation in a Public Good Game

NASA Astrophysics Data System (ADS)

Colasante, Annarita

2017-02-01

This paper presents an investigation about cooperation in a Public Good Game using an Agent Based Model calibrated on experimental data. Starting from the experiment proposed in Colasante and Russo (2016), we analyze the dynamic of cooperation in a Public Good Game where agents receive an heterogeneous income and choose both the level of contribution and the distribution rule. The starting point is the calibration and the output validation of the model using the experimental results. Once tested the goodness of fit of the Agent Based Model, we run some policy experiment in order to verify how each distribution rule, i.e. equidistribution, proportional to contribution and progressive, affects the level of contribution in the simulated model. We find out that the share of cooperators decreases over time if we exogenously set the equidistribution rule. On the contrary, the share of cooperators converges to 100 % if we impose the progressive rule. Finally, the most interesting result refers to the effect of the progressive rule. We observe that, in the case of high inequality, this rule is not able to reduce the heterogeneity of income.

Beating Cheaters at Their Own Game

NASA Astrophysics Data System (ADS)

Rauch, Joseph; Kondev, Jane; Sanchez, Alvaro

2014-03-01

Public goods games occur over many different scales in nature, from microbial biofilms to the human commons. On each scale stable populations of cooperators (members who invest into producing some good shared by the entire population) and cheaters (members who make no investment yet still share the common goods) has been observed. This observation raises interesting questions, like how do cooperators maintain their presence in a game that seems to heavily favor cheaters, and what strategies for cooperation could populations employ to increase their success? We propose a model of a public goods game with two different player populations, S and D, which employ two different strategies: the D population always cheats and the S population makes a stochastic decision whether to cooperate or not. We find that stochastic cooperation improves the success of the S population over the competing D population, but at a price. As the probability of cheating by the S players increases they outcompete the D players but the total population becomes more ecologically unstable (i.e., the likelihood of its extinction grows). We investigate this trade off between evolutionary success and ecological stability and propose experiments using populations of yeast cells to test our predictions.

Shared decision making in Swedish community mental health services - an evaluation of three self-reporting instruments.

PubMed

Rosenberg, David; Schön, Ulla-Karin; Nyholm, Maria; Grim, Katarina; Svedberg, Petra

2017-04-01

Despite the potential impact of shared decision making on users satisfaction with care and quality in health care decisions, there is a lack of knowledge and skills regarding how to work with shared decision making among health care providers. The aim of this study was to evaluate the psychometric properties of three instruments that measure varied dimensions of shared decision making, based on self-reports by clients, in a Swedish community mental health context. The study sample consisted of 121 clients with experience of community mental health care, and involved in a wide range of decisions regarding both social support and treatment. The questionnaires were examined for face and content validity, internal consistency, test-retest reliability and construct validity. The instruments displayed good face and content validity, satisfactory internal consistency and a moderate to good level of stability in test-retest reliability with fair to moderate construct correlations, in a sample of clients with serious mental illness and experience of community mental health services in Sweden. The questionnaires are considered to be relevant to the decision making process, user-friendly and appropriate in a Swedish community mental health care context. They functioned well in settings where non-medical decisions, regarding social and support services, are the primary focus. The use of instruments that measure various dimensions of the self-reported experience of clients, can be a key factor in developing knowledge of how best to implement shared decision making in mental health services.

Global Cryptosporidium Loads from Livestock Manure.

PubMed

Vermeulen, Lucie C; Benders, Jorien; Medema, Gertjan; Hofstra, Nynke

2017-08-01

Understanding the environmental pathways of Cryptosporidium is essential for effective management of human and animal cryptosporidiosis. In this paper we aim to quantify livestock Cryptosporidium spp. loads to land on a global scale using spatially explicit process-based modeling, and to explore the effect of manure storage and treatment on oocyst loads using scenario analysis. Our model GloWPa-Crypto L1 calculates a total global Cryptosporidium spp. load from livestock manure of 3.2 × 10 23 oocysts per year. Cattle, especially calves, are the largest contributors, followed by chickens and pigs. Spatial differences are linked to animal spatial distributions. North America, Europe, and Oceania together account for nearly a quarter of the total oocyst load, meaning that the developing world accounts for the largest share. GloWPa-Crypto L1 is most sensitive to oocyst excretion rates, due to large variation reported in literature. We compared the current situation to four alternative management scenarios. We find that although manure storage halves oocyst loads, manure treatment, especially of cattle manure and particularly at elevated temperatures, has a larger load reduction potential than manure storage (up to 4.6 log units). Regions with high reduction potential include India, Bangladesh, western Europe, China, several countries in Africa, and New Zealand.

Dynamic Load-Balancing for Distributed Heterogeneous Computing of Parallel CFD Problems

NASA Technical Reports Server (NTRS)

Ecer, A.; Chien, Y. P.; Boenisch, T.; Akay, H. U.

2000-01-01

The developed methodology is aimed at improving the efficiency of executing block-structured algorithms on parallel, distributed, heterogeneous computers. The basic approach of these algorithms is to divide the flow domain into many sub- domains called blocks, and solve the governing equations over these blocks. Dynamic load balancing problem is defined as the efficient distribution of the blocks among the available processors over a period of several hours of computations. In environments with computers of different architecture, operating systems, CPU speed, memory size, load, and network speed, balancing the loads and managing the communication between processors becomes crucial. Load balancing software tools for mutually dependent parallel processes have been created to efficiently utilize an advanced computation environment and algorithms. These tools are dynamic in nature because of the chances in the computer environment during execution time. More recently, these tools were extended to a second operating system: NT. In this paper, the problems associated with this application will be discussed. Also, the developed algorithms were combined with the load sharing capability of LSF to efficiently utilize workstation clusters for parallel computing. Finally, results will be presented on running a NASA based code ADPAC to demonstrate the developed tools for dynamic load balancing.

Dependence of Helicon Antenna Loading on the Antenna/Plasma Gap and n|| in DIII-D Experiments

NASA Astrophysics Data System (ADS)

Pinsker, R. I.; Moeller, C. P.

2017-10-01

A comprehensive set of measurements of the plasma loading of a 12-element antenna array, designed to launch helicon waves (i.e., very-high-harmonic fast waves), were performed on DIII-D in 2016. The antenna, operated in the 466 - 486 MHz band, is prototypical of a wider array for a 1-MW-level experiment planned for 2018-9. The dependence of the antenna loading on antenna/plasma gap is of great practical significance, as the gap must be kept greater than a minimum distance to suppress deleterious plasma-material interactions, while the loading must be high enough to retain good efficiency of power transfer to the plasma. While the loading in all examined plasma regimes, including both limited and diverted L-mode discharges and H-mode discharges, decayed exponentially with increasing gap in agreement with simple theory, the characteristic decay length was in all cases larger than expected, motivating the development of a more realistic model. Furthermore, the characteristic decay length did not depend on the launched n||, though the absolute level of loading at a given gap increased as |n||| was decreased from 4 to 2. After the antenna was removed from DIII-D, measurements of the loading produced by a 100 Ω/sq resistive film were carried out on the bench. Both the antenna/film gap and n|| were scanned varied and the results compared with calculations done with the QuickWave FDTD electromagnetics solver. Very good agreement was found in this case. Work supported by the US DOE under DE-FC02-04ER54698.

Caring, sharing, and a friendship made for life.

PubMed

Rochester, Joanne

2015-10-01

A patient named "Bill" was assigned to my team in the summer of 2012 for an autologous stem cell transplantation for lymphoma. Bill had previous chemotherapy and had attained clinical status eligibility for a transplantation. Although Bill was rather quiet, he had a lot of questions about me, my family, and my travels. In turn, he shared about his work as a veterinarian, his clinic, and his two dogs that went everywhere with him. He also shared his love of the outdoors and traveling, highlighted by a trip on the Amazon River with his father and daughter. I told him that one of my hobbies is making dill pickles. He countered with stories about his bees and honey, and we agreed to share our homemade goods.

Decision-Making of Older Patients in Context of the Doctor-Patient Relationship: A Typology Ranging from “Self-Determined” to “Doctor-Trusting” Patients

PubMed Central

Voigt, Isabel; Diederichs-Egidi, Heike; Hummers-Pradier, Eva; Dierks, Marie-Luise; Junius-Walker, Ulrike

2013-01-01

Background. This qualitative study aims to gain insight into the perceptions and experiences of older patients with regard to sharing health care decisions with their general practitioners. Patients and Methods. Thirty-four general practice patients (≥70 years) were asked about their preferences and experiences concerning shared decision making with their doctors using qualitative semistructured interviews. All interviews were analysed according to principles of content analysis. The resulting categories were then arranged into a classification grid to develop a typology of preferences for participating in decision-making processes. Results. Older patients generally preferred to make decisions concerning everyday life rather than medical decisions, which they preferred to leave to their doctors. We characterised eight different patient types based on four interdependent positions (self-determination, adherence, information seeking, and trust). Experiences of a good doctor-patient relationship were associated with trust, reliance on the doctor for information and decision making, and adherence. Conclusion. Owing to the varied patient decision-making types, it is not easy for doctors to anticipate the desired level of patient involvement. However, the decision matter and the self-determination of patients provide good starting points in preparing the ground for shared decision making. A good relationship with the doctor facilitates satisfying decision-making experiences. PMID:23691317

Numerical modeling of axi-symmetrical cold forging process by ``Pseudo Inverse Approach''

NASA Astrophysics Data System (ADS)

Halouani, A.; Li, Y. M.; Abbes, B.; Guo, Y. Q.

2011-05-01

The incremental approach is widely used for the forging process modeling, it gives good strain and stress estimation, but it is time consuming. A fast Inverse Approach (IA) has been developed for the axi-symmetric cold forging modeling [1-2]. This approach exploits maximum the knowledge of the final part's shape and the assumptions of proportional loading and simplified tool actions make the IA simulation very fast. The IA is proved very useful for the tool design and optimization because of its rapidity and good strain estimation. However, the assumptions mentioned above cannot provide good stress estimation because of neglecting the loading history. A new approach called "Pseudo Inverse Approach" (PIA) was proposed by Batoz, Guo et al.. [3] for the sheet forming modeling, which keeps the IA's advantages but gives good stress estimation by taking into consideration the loading history. Our aim is to adapt the PIA for the cold forging modeling in this paper. The main developments in PIA are resumed as follows: A few intermediate configurations are generated for the given tools' positions to consider the deformation history; the strain increment is calculated by the inverse method between the previous and actual configurations. An incremental algorithm of the plastic integration is used in PIA instead of the total constitutive law used in the IA. An example is used to show the effectiveness and limitations of the PIA for the cold forging process modeling.

The role of public goods in planetary evolution

NASA Astrophysics Data System (ADS)

McInerney, James O.; Erwin, Douglas H.

2017-11-01

Biological public goods are broadly shared within an ecosystem and readily available. They appear to be widespread and may have played important roles in the history of life on Earth. Of particular importance to events in the early history of life are the roles of public goods in the merging of genomes, protein domains and even cells. We suggest that public goods facilitated the origin of the eukaryotic cell, a classic major evolutionary transition. The recognition of genomic public goods challenges advocates of a direct graph view of phylogeny, and those who deny that any useful phylogenetic signal persists in modern genomes. Ecological spillovers generate public goods that provide new ecological opportunities. This article is part of the themed issue 'Reconceptualizing the origins of life'.

Biomechanical influence of disk properties on the load transfer of healthy and degenerated disks using a poroelastic finite element model.

PubMed

Chagnon, Amélie; Aubin, Carl-Eric; Villemure, Isabelle

2010-11-01

Spine degeneration is a pathology that will affect 80% of the population. Since the intervertebral disks play an important role in transmitting loads through the spine, the aim of this study was to evaluate the biomechanical impact of disk properties on the load carried by healthy (Thompson grade I) and degenerated (Thompson grades III and IV) disks. A three-dimensional parametric poroelastic finite element model of the L4/L5 motion segment was developed. Grade I, grade II, and grade IV disks were modeled by altering the biomechanical properties of both the annulus and nucleus. Models were validated using published creep experiments, in which a constant compressive axial stress of 0.35 MPa was applied for 4 h. Pore pressure (PP) and effective stress (S(E)) were analyzed as a function of time following loading application (1 min, 5 min, 45 min, 125 min, and 245 min) and discal region along the midsagittal profile for each disk grade. A design of experiments was further implemented to analyze the influence of six disk parameters (disk height (H), fiber proportion (%F), drained Young's modulus (E(a),E(n)), and initial permeability (k(a),k(n)) of both the annulus and nucleus) on load-sharing for disk grades I and IV. Simulations of grade I, grade III, and grade IV disks agreed well with the available published experimental data. Disk height (H) had a significant influence (p<0.05) on the PP and S(E) during the entire loading history for both healthy and degenerated disk models. Young's modulus of the annulus (E(a)) significantly affected not only S(E) in the annular region for both disk grades in the initial creep response but also S(E) in the nucleus zone for degenerated disks with further creep response. The nucleus and annulus permeabilities had a significant influence on the PP distribution for both disk grades, but this effect occurred at earlier stages of loading for degenerated than for healthy disk models. This is the first study that investigates the biomechanical influence of both geometrical and material disk properties on the load transfer of healthy and degenerated disks. Disk height is a significant parameter for both healthy and degenerated disks during the entire loading. Changes in the annulus stiffness, as well as in the annulus and nucleus permeability, control load-sharing in different ways for healthy and degenerated disks.

[Experimental study on loading naringin composite scaffolds for repairing rabbit osteochondral defects].

PubMed

Huang, Junbo; Wang, Shiyong; Zhang, Xiaomin; Li, Gen; Ji, Puzhong; Zhao, Hongbin

2017-04-01

To investigate the performance of loading naringin composite scaffolds and its effects on repair of osteochondral defects. The loading naringin and unloading naringin sustained release microspheres were prepared by W/O/W method; with the materials of the attpulgite and the collagen type I, the loading naringin, unloading naringin, and loading transforming growth factor β 1 (TGF-β 1 ) osteochondral composite scaffolds were constructed respectively by "3 layers sandwich method". The effect of sustained-release of loading naringin microspheres, the morphology of the composite scaffolds, and the biocompatibility were evaluated respectively by releasing in vitro , scanning electron microscope, and cell counting kit 8. Forty Japanese white rabbits were randomly divided into groups A, B, C, and D, 10 rabbits each group. After a osteochondral defect of 4.5 mm in diameter and 4 mm in depth was made in the intercondylar fossa of two femurs. Defect was not repaired in group A (blank control), and defect was repaired with unloading naringin composite scaffolds (negative control group), loading naringin composite scaffolds (experimental group), and loading TGF-β 1 composite scaffolds (positive control group) in groups B, C, and D respectively. At 3 and 6 months after repair, the intercondylar fossa was harvested for the general, HE staining, and toluidine blue staining to observe the repair effect. Western blot was used to detect the expression of collagen type II in the new cartilage. Loading naringin microspheres had good effect of sustained-release; the osteochondral composite scaffolds had good porosity; the cell proliferation rate on loading naringin composite scaffold was increased significantly when compared with unloading naringin scaffold ( P <0.05). General observation revealed that defect range of groups C and D was reduced significantly when compared with groups A and B at 3 months after repair; at 6 months after repair, defects of group C were covered by new cartilage, and new cartilage well integrated with the adjacent cartilage in group D. The results of histological staining revealed that defects were filled with a small amount of fibrous tissue in groups A and B, and a small amount of new cartilage in groups C and D at 3 months after repair; new cartilage of groups C and D was similar to normal cartilage, but defects were filled with a large amount of fibrous tissue in groups A and B at 6 months after repair. The expression of collagen type II in groups C and D was significantly higher than that in groups A and B ( P <0.05), but no significant difference was found between groups C and D ( P >0.05). Loading naringin composite scaffolds have good biocompatibility and effect in repair of rabbit articular osteochondral defects.

Optimal load scheduling in commercial and residential microgrids

NASA Astrophysics Data System (ADS)

Ganji Tanha, Mohammad Mahdi

Residential and commercial electricity customers use more than two third of the total energy consumed in the United States, representing a significant resource of demand response. Price-based demand response, which is in response to changes in electricity prices, represents the adjustments in load through optimal load scheduling (OLS). In this study, an efficient model for OLS is developed for residential and commercial microgrids which include aggregated loads in single-units and communal loads. Single unit loads which include fixed, adjustable and shiftable loads are controllable by the unit occupants. Communal loads which include pool pumps, elevators and central heating/cooling systems are shared among the units. In order to optimally schedule residential and commercial loads, a community-based optimal load scheduling (CBOLS) is proposed in this thesis. The CBOLS schedule considers hourly market prices, occupants' comfort level, and microgrid operation constraints. The CBOLS' objective in residential and commercial microgrids is the constrained minimization of the total cost of supplying the aggregator load, defined as the microgrid load minus the microgrid generation. This problem is represented by a large-scale mixed-integer optimization for supplying single-unit and communal loads. The Lagrangian relaxation methodology is used to relax the linking communal load constraint and decompose the independent single-unit functions into subproblems which can be solved in parallel. The optimal solution is acceptable if the aggregator load limit and the duality gap are within the bounds. If any of the proposed criteria is not satisfied, the Lagrangian multiplier will be updated and a new optimal load schedule will be regenerated until both constraints are satisfied. The proposed method is applied to several case studies and the results are presented for the Galvin Center load on the 16th floor of the IIT Tower in Chicago.

Modeling and Measurement of Sustained Loading and Temperature-Dependent Deformation of Carbon Fiber-Reinforced Polymer Bonded to Concrete.

PubMed

Jeong, Yoseok; Lee, Jaeha; Kim, WooSeok

2015-01-29

This paper aims at presenting the effects of short-term sustained load and temperature on time-dependent deformation of carbon fiber-reinforced polymer (CFRP) bonded to concrete and pull-off strength at room temperature after the sustained loading period. The approach involves experimental and numerical analysis. Single-lap shear specimens were used to evaluate temperature and short-term sustained loading effects on time-dependent behavior under sustained loading and debonding behavior under pull-off loading after a sustained loading period. The numerical model was parameterized with experiments on the concrete, FRP, and epoxy. Good correlation was seen between the numerical results and single-lap shear experiments. Sensitivity studies shed light on the influence of temperature, epoxy modulus, and epoxy thickness on the redistribution of interfacial shear stress during sustained loading. This investigation confirms the hypothesis that interfacial stress redistribution can occur due to sustained load and elevated temperature and its effect can be significant.

Modeling and Measurement of Sustained Loading and Temperature-Dependent Deformation of Carbon Fiber-Reinforced Polymer Bonded to Concrete

PubMed Central

Jeong, Yoseok; Lee, Jaeha; Kim, WooSeok

2015-01-01

This paper aims at presenting the effects of short-term sustained load and temperature on time-dependent deformation of carbon fiber-reinforced polymer (CFRP) bonded to concrete and pull-off strength at room temperature after the sustained loading period. The approach involves experimental and numerical analysis. Single-lap shear specimens were used to evaluate temperature and short-term sustained loading effects on time-dependent behavior under sustained loading and debonding behavior under pull-off loading after a sustained loading period. The numerical model was parameterized with experiments on the concrete, FRP, and epoxy. Good correlation was seen between the numerical results and single-lap shear experiments. Sensitivity studies shed light on the influence of temperature, epoxy modulus, and epoxy thickness on the redistribution of interfacial shear stress during sustained loading. This investigation confirms the hypothesis that interfacial stress redistribution can occur due to sustained load and elevated temperature and its effect can be significant. PMID:28787948

Colony-level variation in pollen collection and foraging preferences among wild-caught bumble bees (Hymenoptera: Apidae).

PubMed

Saifuddin, Mustafa; Jha, Shalene

2014-04-01

Given that many pollinators have exhibited dramatic declines related to habitat destruction, an improved understanding of pollinator resource collection across human-altered landscapes is essential to conservation efforts. Despite the importance of bumble bees (Bombus spp.) as global pollinators, little is known regarding how pollen collection patterns vary between individuals, colonies, and landscapes. In this study, Vosnesensky bumble bees (Bombus vosnesenskii Radoszkowski) were collected from a range of human-altered and natural landscapes in northern California. Extensive vegetation surveys and Geographic Information System (GIS)-based habitat classifications were conducted at each site, bees were genotyped to identify colony mates, and pollen loads were examined to identify visited plants. In contrast to predictions based on strong competitive interactions, pollen load composition was significantly more similar for bees captured in a shared study region compared with bees throughout the research area but was not significantly more similar for colony mates. Preference analyses revealed that pollen loads were not composed of the most abundant plant species per study region. The majority of ranked pollen preference lists were significantly correlated for pairwise comparisons of colony mates and individuals within a study region, whereas the majority of pairwise comparisons of ranked pollen preference lists between individuals located at separate study regions were uncorrelated. Results suggest that pollen load composition and foraging preferences are similar for bees throughout a shared landscape regardless of colony membership. The importance of native plant species in pollen collection is illustrated through preference analyses, and we suggest prioritization of specific rare native plant species for enhanced bumble bee pollen collection.

Naltrexone-loaded poly[La-(Glc-Leu)] polymeric microspheres for the treatment of alcohol dependence: in vitro characterization and in vivo biocompatibility assessment.

PubMed

Pagar, Kunal P; Vavia, Pradeep R

2014-06-01

The poly[La-(Glc-Leu)] copolymer was applied in the present investigation as polymeric carrier to fabricate naltrexone (NTX)-loaded poly[La-(Glc-Leu)] microspheres in the single emulsion solvent evaporation technique for the long-term treatment of alcohol dependence. Newly synthesized poly[La-(Glc-Leu)] copolymer exhibited diminished crystallanity, good biocompatibility and favorable biodegradability to be explored for drug delivery application. Scanning Electron Microscopy study revealed smooth and spherical-shaped NTX-loaded polymeric microspheres with a mean size of 10-90 µm. Influence of various decisive formulation variables such as amount of polymer, stabilizer concentration, homogenization speed, homogenization time, drug loading and organic-to-aqueous phase ratio on particle size, and entrapment efficiency was studied. Differential scanning calorimeter and X-ray diffractometry study confirmed the drug entrapment within polymer matrix into the microsphere environment. In vitro drug release showed the sustained drug release of formulation for the period of 28 d giving biphasic release pattern. Histological examination of NTX-loaded poly[La-(Glc-Leu)] microspheres injected intramuscularly into the thigh muscle of Wistar rats showed minimal inflammatory reaction, demonstrating that NTX-loaded microspheres were biocompatible. Insignificant increase in the serum creatine phosphokinase level (p < 0.05) as compared with the normal value revealed good muscle compatibility of the poly[La-(Glc-Leu)] microsphere system. Biocompatible nature and sustained drug-release action of poly[La-(Glc-Leu)] microspheres may have potential application in depot therapy.

Load cell verification of the uprated high pressure oxygen turbopump for the Space Shuttle Main Engine

NASA Technical Reports Server (NTRS)

Beatty, R. F.; Hine, M. J.

1986-01-01

The high pressure turbomachinery of the Space Shuttle Main Engine has the highest power-to-weight ratio of any operational machine known. Subsynchronous rotor whirl of the high pressure oxygen turbopump occurred in development testing at full-power level (109 percent thrust). The means by which the turbopump was successfully uprated is presented herein. The subsynchronous motion was determined to be driven by impeller destabilizing forces in combination with low net damping and bearing degradation. The degradation resulted from ball wear due primarily to an excessive loading condition of operating too near the lightly damped rotor second critical speed while under a large static load and, secondarily, from reverse bearing loading or loss of internal clearance and coolant during simulated flight conditions. The rotor response was reduced by stiffening the shaft and supports, optimizing the stiffness and damping of annular seals, and increasing the bearing deadband. The uprated oxygen turbopump configuration was verified by converting the pump and bearing support into a load cell for the purpose of systematically quantifying the load reduction benefits relative to baseline turbopumps. The damped second critical speed margin and the load sharing have been substantially improved which has resulted in reduced bearing loads for improved service life of the machine at full-power level.

Self-perceived health in older Europeans: Does the choice of survey matter?

PubMed Central

Croezen, Simone; Burdorf, Alex

2016-01-01

Abstract Background: Cross-national comparisons of health in European countries provide crucial information to monitor health and disease within and between countries and to inform policy and research priorities. However, variations in estimates might occur when information from cross-national European surveys with different characteristics are used. We compared the prevalence of very good or good self-perceived health across 10 European countries according to three European surveys and investigated which survey characteristics contributed to differences in prevalence estimates. Methods: We used aggregate data from 2004 to 2005 of respondents aged 55–64 years from the European Union Statistics on Income and Living Conditions (EU-SILC), the Survey of Health, Ageing and Retirement in Europe (SHARE) and the European Social Survey (ESS). Across the surveys, self-perceived health was assessed by the same question with response options ranging from very good to very bad. Results: Despite a good correlation between the surveys (intraclass correlation coefficient: 0.77), significant differences were found in prevalence estimates of very good or good self-perceived health. The survey response, sample size and survey mode contributed statistically significantly to the differences between the surveys. Multilevel linear regression analyses, adjusted for survey characteristics, showed a higher prevalence for SHARE (+6.96, 95% CIs: 3.14 to 10.8) and a lower prevalence (−3.12; 95% CIs: −7.11 to 0.86) for ESS, with EU-SILC as the reference survey. Conclusion: Three important health surveys in Europe showed substantial differences for presence of very good or good self-perceived health. These differences limit the usefulness for direct comparisons across studies in health policies for Europe. PMID:26989125

The Ethics of Good Communication in a Complex Research Partnership

PubMed Central

Sodeke, Stephen; Turner, Timothy; Tarver, Will

2013-01-01

The tripartite partnership among Morehouse School of Medicine, Tuskegee University, and University of Alabama at Birmingham is complex. In 2005, the three schools—with different institutional cultures, characters, and resources—agreed to collaborate in efforts to eliminate racial/ethnic disparities in cancer burdens. Pursuing this laudable aim predictably involved some miscommunication. The Bioethics Shared Resource (BSR) group foresaw such challenges and monitored interactions to prevent harm, noting that while effective communication is critical to the achievement of mutual goals, an understanding and prudent use of proven communication principles is a sine qua non for success. In this commentary, we share the undergirding moral concepts, communication approaches, and lessons learned. This experience has led us to propose an ethics of good communication for others to consider. PMID:20675944

A model of rotationally-sampled wind turbulence for predicting fatigue loads in wind turbines

NASA Technical Reports Server (NTRS)

Spera, David A.

1995-01-01

Empirical equations are presented with which to model rotationally-sampled (R-S) turbulence for input to structural-dynamic computer codes and the calculation of wind turbine fatigue loads. These equations are derived from R-S turbulence data which were measured at the vertical-plane array in Clayton, New Mexico. For validation, the equations are applied to the calculation of cyclic flapwise blade loads for the NASA/DOE Mod-2 2.5-MW experimental HAWT's (horizontal-axis wind turbines), and the results compared to measured cyclic loads. Good correlation is achieved, indicating that the R-S turbulence model developed in this study contains the characteristics of the wind which produce many of the fatigue loads sustained by wind turbines. Empirical factors are included which permit the prediction of load levels at specified percentiles of occurrence, which is required for the generation of fatigue load spectra and the prediction of the fatigue lifetime of structures.

Analysis of pollen load based on color, physicochemical composition and botanical source.

PubMed

Modro, Anna F H; Silva, Izabel C; Luz, Cynthia F P; Message, Dejair

2009-06-01

Pollen load samples from 10 hives of Apis mellifera (L.) were analyzed based on their physicochemical composition and botanical source, considering color as a parameter for quality control. In seven samples it was possible to establish the occurrence of more than 80% of a single pollen type, characterizing them as unifloral but with protein content variation. One of the samples was exclusively composed of saprophytic fungi (Cladosporium sp.). Comparing the mean results of the fungi loads with those of the nutritional components of pollen load, the former presented higher protein, mineral matter and dry matter and lower organic matter, ethereal extract and total carbohydrate values. The monochromatic samples met the physicochemical specifications regulating pollen load quality. The results showed that homogeneous coloration of the pollen load was not found to be a good indication of unifloral pollen, confirming the importance of physicochemical analysis and melissopalynological analysis for characterization of the quality of commercial pollen load.

Buckling analysis of carbon nanotube bundles under axial compressive, bending and torsional loadings via a structural mechanics model

NASA Astrophysics Data System (ADS)

Lashkari Zadeh, Ali; Shariati, Mahmoud; Torabi, Hamid

2012-11-01

A structural mechanics model is employed for the investigation of the buckling behavior of carbon nanotube bundles of three single-walled carbon nanotubes (SWCNTs) under axial compressive, bending and torsional loadings. The effects of van der Waals (vdW) forces are further modeled using a nonlinear spring element.The effects of different types of boundary conditions are studied for nanotubes with various aspect ratios. The results reveal that bundles comprising longer SWCNTs exhibit lower critical buckling load. Moreover, for the fixed-free boundary condition the rate of critical buckling load reduction is highest, while the lowest critical buckling load occurs. Simulations show good agreement between our model and molecular dynamics results.

Utilizing Photogrammetry and Strain Gage Measurement to Characterize Pressurization of Inflatable Modules

NASA Technical Reports Server (NTRS)

Mohammed, Anil

2011-01-01

This paper focuses on integrating a large hatch penetration into inflatable modules of various constructions. This paper also compares load predictions with test measurements. The strain was measured by utilizing photogrammetric methods and strain gages mounted to select clevises that interface with the structural webbings. Bench testing showed good correlation between strain data collected from an extensometer and photogrammetric measurements, even when the material transitioned from the low load to high load strain region of the curve. The full-scale torus design module showed mixed results as well in the lower load and high strain regions. After thorough analysis of photogrammetric measurements, strain gage measurements, and predicted load, the photogrammetric measurements seem to be off by a factor of two.

A temperature match based optimization method for daily load prediction considering DLC effect

DOE Office of Scientific and Technical Information (OSTI.GOV)

Yu, Z.

This paper presents a unique optimization method for short term load forecasting. The new method is based on the optimal template temperature match between the future and past temperatures. The optimal error reduction technique is a new concept introduced in this paper. Two case studies show that for hourly load forecasting, this method can yield results as good as the rather complicated Box-Jenkins Transfer Function method, and better than the Box-Jenkins method; for peak load prediction, this method is comparable in accuracy to the neural network method with back propagation, and can produce more accurate results than the multi-linear regressionmore » method. The DLC effect on system load is also considered in this method.« less

Biaxial fatigue loading of notched composites

NASA Technical Reports Server (NTRS)

Francis, P. H.; Walrath, D. E.; Sims, D. F.; Weed, D. N.

1977-01-01

Thin-walled, 2.54-cm diameter tubular specimens of graphite/epoxy were fatigue cycled in combinations of axial, torsional, and internal pressure loading. Two different four-ply layup configurations were tested: (0-90)s and (+ or- 45)s; each tube contained a 0.48-cm diameter circular hole penetrating one wall midway along the tube length. S-N curves were developed to characterize fatigue behavior under pure axial, torsional, or internal pressure loading, as well as combined loading fatigue. A theory was developed based on a plane stress model which enabled the S-N curve for combined stress states to be predicted from the S-N data for the uniaxial loading modes. Correlation of the theory with the experimental data proved to be remarkably good.

Intelligent support of e-management for consumer-focused virtual enterprises

NASA Astrophysics Data System (ADS)

Chandra, Charu; Smirnov, Alexander V.

2000-10-01

The interest in consumer-focused virtual enterprises (VE) decision-making problem is growing fast. The purpose of this type of enterprise is to transform incomplete information about customer orders and available resources into-co-ordinated plans for production and replenishment of goods and services in the temporal network formed by collaborating units. This implies that information in the consumer-focused VE can be shared via Internet, Intranet, and Extranet for business-to-consumer (B2C), business-to-business service (B2B-S), and business-to-business goods (B2B-G) transactions. One of the goals of Internet-Based Management (e-management) is to facilitate transfer and sharing of data and knowledge in the context of enterprise collaboration. This paper discusses a generic framework of e-management that integrates intelligent information support group-decision making, and agreement modeling for a VE network. It offers the platform for design and modeling of diverse implementation strategies related to the type of agreement, optimization policies, decision-making strategies, organization structures, and information sharing strategies and mechanisms, and business policies for the VE.

A distributed computing approach to mission operations support. [for spacecraft

NASA Technical Reports Server (NTRS)

Larsen, R. L.

1975-01-01

Computing mission operation support includes orbit determination, attitude processing, maneuver computation, resource scheduling, etc. The large-scale third-generation distributed computer network discussed is capable of fulfilling these dynamic requirements. It is shown that distribution of resources and control leads to increased reliability, and exhibits potential for incremental growth. Through functional specialization, a distributed system may be tuned to very specific operational requirements. Fundamental to the approach is the notion of process-to-process communication, which is effected through a high-bandwidth communications network. Both resource-sharing and load-sharing may be realized in the system.

The pricing effect of the common pattern in firm-level idiosyncratic volatility: Evidence from A-Share stocks of China

NASA Astrophysics Data System (ADS)

Su, Zhi; Shu, Tengjia; Yin, Libo

2018-05-01

Inspired by Herskovic et al. (2016), we investigate the pricing effect of the firm-level common idiosyncratic volatility (CIV) in China's A-Share market. Return tests indicate that lower CIV risk loadings bring higher returns significantly, while the pricing function of market volatility (MV) is inconsistent. Strategy that goes long the highest CIV-beta quintile and short the lowest CIV-beta quintile brings an annualized average return of 5%-7%. Our findings supplement Herskovic et al. (2016) by confirming a significantly negative relationship between CIV and stock returns in a developing market.

Efficacy of an automated ultraviolet C device in a shared hospital bathroom.

PubMed

Cooper, Jesse; Bryce, Elizabeth; Astrakianakis, George; Stefanovic, Aleksandra; Bartlett, Karen

2016-12-01

Toilet flushing can contribute to disease transmission by generating aerosolized bacteria and viruses that can land on nearby surfaces or follow air currents. Aerobic and anaerobic bacterial bioaerosol loads, and bacterial counts on 2 surfaces in a bathroom with a permanently installed, automated ultraviolet C (UVC) irradiation device, were significantly lower than in a comparable bathroom without the UVC device. Permanently installed UVC lights may be a useful supplementary decontamination tool in shared patient bathrooms. Copyright © 2016 Association for Professionals in Infection Control and Epidemiology, Inc. Published by Elsevier Inc. All rights reserved.

Evaluation of effects of super-heavy loading on the US 41 bridge over the White River : appendices.

DOT National Transportation Integrated Search

2011-01-01

Built in 1958, the US-41 White River Bridge is a two-girder, riveted steel structure located in Hazelton, IN. The bridge is comprised of two, sixteen span superstructures sharing a common substructure. Each superstructure also contains four pin and h...

Evaluation of effects of super-heavy loading on the US 41 bridge over the White River.

DOT National Transportation Integrated Search

2011-01-01

Built in 1958, the US-41 White River Bridge is a two-girder, riveted steel structure located in Hazelton, IN. The bridge is comprised of two, sixteen span : superstructures sharing a common substructure. Each superstructure also contains four pin and...

Sharing the Load Denver Public Schools' Differentiated Roles Pilot

ERIC Educational Resources Information Center

Aspen Institute, 2014

2014-01-01

To assist system administrators as they pursue their own teacher leadership initiatives, this profile from Leading Educators and the Aspen Institute details the steps Denver Public Schools (DPS) took to design and implement its Differentiated Roles pilot. Specifically, it examines the initiative's opportunities and challenges within the context of…

14 CFR 1214.813 - Computation of sharing and pricing parameters.

Code of Federal Regulations, 2012 CFR

2012-01-01

... paragraph of this section shall be applied as indicated. The procedure for computing Shuttle load factor, charge factor, and flight price for Spacelab payloads replaces the procedure contained in the Shuttle policy. (2) Shuttle charge factors as derived herein apply to the standard mission destination of 160 nmi...

14 CFR 1214.813 - Computation of sharing and pricing parameters.

Code of Federal Regulations, 2013 CFR

2013-01-01

... paragraph of this section shall be applied as indicated. The procedure for computing Shuttle load factor, charge factor, and flight price for Spacelab payloads replaces the procedure contained in the Shuttle policy. (2) Shuttle charge factors as derived herein apply to the standard mission destination of 160 nmi...

14 CFR § 1214.813 - Computation of sharing and pricing parameters.

Code of Federal Regulations, 2014 CFR

2014-01-01

... paragraph of this section shall be applied as indicated. The procedure for computing Shuttle load factor, charge factor, and flight price for Spacelab payloads replaces the procedure contained in the Shuttle policy. (2) Shuttle charge factors as derived herein apply to the standard mission destination of 160 nmi...

14 CFR 1214.813 - Computation of sharing and pricing parameters.

Code of Federal Regulations, 2011 CFR

2011-01-01

... paragraph of this section shall be applied as indicated. The procedure for computing Shuttle load factor, charge factor, and flight price for Spacelab payloads replaces the procedure contained in the Shuttle policy. (2) Shuttle charge factors as derived herein apply to the standard mission destination of 160 nmi...

Sharing the Literacy Load

ERIC Educational Resources Information Center

Orechovsky, Patricia

2010-01-01

The literacy team at Brentwood (NY) High School, a large urban high school, focused its efforts on building content-area teachers' literacy instruction skills. The team is made up of teachers from the various content areas, including physical education and art, as well as supportive administrators. The team developed a pacing guide, a monthly…

Financial Planning Strategies for Senior Military Officers.

DTIC Science & Technology

1986-05-15

being offered has declined significantly. In that preferred shares are a sort of hybrid of common stocks and bonds. they offer a middle of the road...2. Total return no-load mutual funds should be your first consideraticn in selectirg an investment veiclE . Avoid speculative, non-liquid investments

Evaluation of effects of super-heavy loading on the US 41 bridge over the White River : technical summary.

DOT National Transportation Integrated Search

2011-01-01

Built in 1958, the US-41 White River Bridge is a two-girder, riveted steel structure located near Hazelton, IN. The bridge is comprised of two, sixteen span superstructures sharing a common substructure. Each superstructure also contains four pin and...

A nanoporous MXene film enables flexible supercapacitors with high energy storage.

PubMed

Fan, Zhimin; Wang, Youshan; Xie, Zhimin; Xu, Xueqing; Yuan, Yin; Cheng, Zhongjun; Liu, Yuyan

2018-05-14

MXene films are attractive for use in advanced supercapacitor electrodes on account of their ultrahigh density and pseudocapacitive charge storage mechanism in sulfuric acid. However, the self-restacking of MXene nanosheets severely affects their rate capability and mass loading. Herein, a free-standing and flexible modified nanoporous MXene film is fabricated by incorporating Fe(OH)3 nanoparticles with diameters of 3-5 nm into MXene films and then dissolving the Fe(OH)3 nanoparticles, followed by low calcination at 200 °C, resulting in highly interconnected nanopore channels that promote efficient ion transport without compromising ultrahigh density. As a result, the modified nanoporous MXene film presents an attractive volumetric capacitance (1142 F cm-3 at 0.5 A g-1) and good rate capability (828 F cm-3 at 20 A g-1). Furthermore, it still displays a high volumetric capacitance of 749 F cm-3 and good flexibility even at a high mass loading of 11.2 mg cm-2. Therefore, this flexible and free-standing nanoporous MXene film is a promising electrode material for flexible, portable and compact storage devices. This study provides an efficient material design for flexible energy storage devices possessing high volumetric capacitance and good rate capability even at a high mass loading.

KC-135 wing and winglet flight pressure distributions, loads, and wing deflection results with some wind tunnel comparisons

NASA Technical Reports Server (NTRS)

Montoya, L. C.; Jacobs, P.; Flechner, S.; Sims, R.

1982-01-01

A full-scale winglet flight test on a KC-135 airplane with an upper winglet was conducted. Data were taken at Mach numbers from 0.70 to 0.82 at altitudes from 34,000 feet to 39,000 feet at stabilized flight conditions for wing/winglet configurations of basic wing tip, 15/-4 deg, 15/-2 deg, and 0/-4 deg winglet cant/incidence. An analysis of selected pressure distribution and data showed that with the basic wing tip, the flight and wind tunnel wing pressure distribution data showed good agreement. With winglets installed, the effects on the wing pressure distribution were mainly near the tip. Also, the flight and wind tunnel winglet pressure distributions had some significant differences primarily due to the oilcanning in flight. However, in general, the agreement was good. For the winglet cant and incidence configuration presented, the incidence had the largest effect on the winglet pressure distributions. The incremental flight wing deflection data showed that the semispan wind tunnel model did a reasonable job of simulating the aeroelastic effects at the wing tip. The flight loads data showed good agreement with predictions at the design point and also substantiated the predicted structural penalty (load increase) of the 15 deg cant/-2 deg incidence winglet configuration.

Sharing the Knowledge: Government-Private Sector Partnerships to Enhance Information Security

DTIC Science & Technology

2000-05-01

private sector . However, substantial barriers threaten to block information exchanges between the government and private sector . These barriers include concerns over release of sensitive material under Freedom of Information Act requests, antitrust actions, protection of business confidential and other private material, possible liability due to shared information, disclosure of classified information, and burdens entailed with cooperating with law enforcement agencies. There is good cause to believe that the government and private

Improved gas thrust bearings

NASA Technical Reports Server (NTRS)

Anderson, W. J.; Etsion, I.

1979-01-01

Two variations of gas-lubricated thrust bearings extend substantially load-carrying range over existing gas bearings. Dual-Action Gas Thrust Bearing's load-carrying capacity is more than ninety percent greater than that of single-action bearing over range of compressibility numbers. Advantages of Cantilever-mounted Thrust Bearing are greater tolerance to dirt ingestion, good initial lift-off characteristics, and operational capability over wide temperature range.

A user view of office automation or the integrated workstation

NASA Technical Reports Server (NTRS)

Schmerling, E. R.

1984-01-01

Central data bases are useful only if they are kept up to date and easily accessible in an interactive (query) mode rather than in monthly reports that may be out of date and must be searched by hand. The concepts of automatic data capture, data base management and query languages require good communications and readily available work stations to be useful. The minimal necessary work station is a personal computer which can be an important office tool if connected into other office machines and properly integrated into an office system. It has a great deal of flexibility and can often be tailored to suit the tastes, work habits and requirements of the user. Unlike dumb terminals, there is less tendency to saturate a central computer, since its free standing capabilities are available after down loading a selection of data. The PC also permits the sharing of many other facilities, like larger computing power, sophisticated graphics programs, laser printers and communications. It can provide rapid access to common data bases able to provide more up to date information than printed reports. Portable computers can access the same familiar office facilities from anywhere in the world where a telephone connection can be made.

Advanced medium-voltage bidirectional dc-dc conversion systems for future electric energy delivery and management systems

NASA Astrophysics Data System (ADS)

Fan, Haifeng

2011-12-01

The distributed renewable energy generation and utilization are constantly growing, and are expected to be integrated with the conventional grid. The growing pressure for innovative solutions will demand power electronics to take an even larger role in future electric energy delivery and management systems, since power electronics are required for the conversion and control of electric energy by most dispersed generation systems Furthermore, power electronics systems can provide additional intelligent energy management, grid stability and power quality capabilities. Medium-voltage isolated dc-dc converter will become one of the key interfaces for grid components with moderate power ratings. To address the demand of medium voltage (MV) and high power capability for future electric energy delivery and management systems, the power electronics community and industry have been reacting in two different ways: developing semiconductor technology or directly connecting devices in series/parallel to reach higher nominal voltages and currents while maintaining conventional converter topologies; and by developing new converter topologies with traditional semiconductor technology, known as multilevel converters or modular converters. The modular approach uses the well-known, mature, and cheaper power semiconductor devices by adopting new converter topologies. The main advantages of the modular approach include: significant improvement in reliability by introducing desired level of redundancy; standardization of components leading to reduction in manufacturing cost and time; power systems can be easily reconfigured to support varying input-output specifications; and possibly higher efficiency and power density of the overall system. Input-series output-parallel (ISOP) modular configuration is a good choice to realize MV to low voltage (LV) conversion for utility application. However, challenges still remain. First of all, for the high-frequency MV utility application, the low switching loss and conduction loss are must-haves for high efficiency, while bidirectional power flow capability is a must for power management requirement. To address the demand, the phase-shift dual-halfbridge (DHB) is proposed as the constituent module of ISOP configuration for MV application. The proposed ISOP DHB converter employs zero-voltage-switching (ZVS) technique combined with LV MOSFETs to achieve low switching and conduction losses under high frequency operation, and therefore high efficiency and high power density, and bidirectional power flow as well. Secondly, a large load range of high efficiency is desired rather than only a specific load point due to the continuous operation and large load variation range of utility application, which is of high importance because of the rising energy cost. This work proposes a novel DHB converter with an adaptive commutation inductor. By utilizing an adaptive inductor as the main energy transfer element, the output power can be controlled by not only the phase shift but also the commutation inductance, which allows the circulating energy to be optimized for different load conditions to maintain ZVS under light load conditions and minimize additional conduction losses under heavy load conditions as well. As a result, the efficiency at both light and heavy load can be significantly improved compared with the conventional DHB converter, and therefore extended high-efficiency range can be achieved. In addition, current stress of switch devices can be reduced. The theoretical analysis is presented and validated by the experimental results on a 50 kHz, 1 kW dc-dc converter module. Thirdly, input-voltage sharing and output-current sharing are critical to assure the advantages of the ISOP modular configuration. To solve this issue, an identically distributed control scheme is proposed in this work. The proposed control scheme, using only one distributed voltage loop to realize both input-voltage and output-current sharing, provides plug-and-play capability, possible high-level fault tolerance, and easy implementation. Another unique advantage of the proposed ISOP DHB converter is the power rating can be easily extended further by directly connecting multiple ISOP DHB converters in input-parallel-outparallel (IPOP) while no additional control is needed. The proposed control scheme is elaborated using the large-signal average model. Further, the stability of the control schemes is analyzed in terms of the constituent modules' topology as well as the configuration, and then an important fact that the stability of control scheme depends on not only the configuration but also the constituent module topology is first revealed in this work. Finally, the simulation and experimental results of an ISOP DHB converter consisting of three modules are presented to verify the proposed control scheme and the high frequency high efficiency operation.

An Experimental Study of the Effect of Shared Information on Pilot/Controller Re-Route Negotiation

NASA Technical Reports Server (NTRS)

Farley, Todd C.; Hansman, R. John

1999-01-01

Air-ground data link systems are being developed to enable pilots and air traffic controllers to share information more fully. The sharing of information is generally expected to enhance their shared situation awareness and foster more collaborative decision making. An exploratory, part-task simulator experiment is described which evaluates the extent to which shared information may lead pilots and controllers to cooperate or compete when negotiating route amendments. The results indicate an improvement in situation awareness for pilots and controllers and a willingness to work cooperatively. Independent of data link considerations, the experiment also demonstrates the value of providing controllers with a good-quality weather representation on their plan view displays. Observed improvements in situation awareness and separation assurance are discussed. It is argued that deployment of this relatively simple, low-risk addition to the plan view displays be accelerated.

Probability distribution of extreme share returns in Malaysia

NASA Astrophysics Data System (ADS)

Zin, Wan Zawiah Wan; Safari, Muhammad Aslam Mohd; Jaaman, Saiful Hafizah; Yie, Wendy Ling Shin

2014-09-01

The objective of this study is to investigate the suitable probability distribution to model the extreme share returns in Malaysia. To achieve this, weekly and monthly maximum daily share returns are derived from share prices data obtained from Bursa Malaysia over the period of 2000 to 2012. The study starts with summary statistics of the data which will provide a clue on the likely candidates for the best fitting distribution. Next, the suitability of six extreme value distributions, namely the Gumbel, Generalized Extreme Value (GEV), Generalized Logistic (GLO) and Generalized Pareto (GPA), the Lognormal (GNO) and the Pearson (PE3) distributions are evaluated. The method of L-moments is used in parameter estimation. Based on several goodness of fit tests and L-moment diagram test, the Generalized Pareto distribution and the Pearson distribution are found to be the best fitted distribution to represent the weekly and monthly maximum share returns in Malaysia stock market during the studied period, respectively.

Benefit sharing: it's time for a definition.

PubMed

Schroeder, D

2007-04-01

Benefit sharing has been a recurrent theme in international debates for the past two decades. However, despite its prominence in law, medical ethics and political philosophy, the concept has never been satisfactorily defined. In this conceptual paper, a definition that combines current legal guidelines with input from ethics debates is developed. Philosophers like boxes; protective casings into which they can put concisely-defined concepts. Autonomy is the human capacity for self-determination; beneficence denotes the virtue of good deeds, coercion is the intentional threat of harm and so on. What about benefit sharing? Does the concept have a box and are the contents clearly defined? The answer to this question has to be no. The concept of benefit sharing is almost unique in that various disciplines use it regularly without precise definitions. In this article, a definition for benefit sharing is provided, to eliminate unnecessary ambiguity.

Benefit sharing: it's time for a definition

PubMed Central

Schroeder, D

2007-01-01

Benefit sharing has been a recurrent theme in international debates for the past two decades. However, despite its prominence in law, medical ethics and political philosophy, the concept has never been satisfactorily defined. In this conceptual paper, a definition that combines current legal guidelines with input from ethics debates is developed. Philosophers like boxes; protective casings into which they can put concisely‐defined concepts. Autonomy is the human capacity for self‐determination; beneficence denotes the virtue of good deeds, coercion is the intentional threat of harm and so on. What about benefit sharing? Does the concept have a box and are the contents clearly defined? The answer to this question has to be no. The concept of benefit sharing is almost unique in that various disciplines use it regularly without precise definitions. In this article, a definition for benefit sharing is provided, to eliminate unnecessary ambiguity. PMID:17400617

Couples' cultural values, shared parenting, and family emotional climate within Mexican American families.

PubMed

Sotomayor-Peterson, Marcela; Figueredo, Aurelio J; Christensen, Donna H; Taylor, Angela R

2012-06-01

This study tested a model of shared parenting as its centerpiece that incorporates cultural values as predictors and family emotional climate as the outcome variable of interest. We aimed to assess the predictive power of the Mexican cultural values of familismo and simpatia over couples' shared parenting practices. We anticipated that higher levels of shared parenting would predict family emotional climate. The participants were 61 Mexican American, low income couples, with at least one child between 3 and 4 years of age, recruited from a home-based Head Start program. The predictive model demonstrated excellent goodness of fit, supporting the hypothesis that a positive emotional climate within the family is fostered when Mexican American couples practice a sufficient level of shared parenting. Empirical evidence was previously scarce on this proposition. The findings also provide evidence for the role of cultural values, highlighting the importance of family solidarity and avoidance of confrontation as a pathway to shared parenting within Mexican American couples. © FPI, Inc.

Good/Bad Girls Read Together: Pre-Adolescent Girls' Co-Authorship of Feminine Subject Positions during a Shared Reading Event.

ERIC Educational Resources Information Center

Enciso, Patricia E.

1998-01-01

Discusses reading with pre-teens Francine Pascal's "Sweet Valley Twins: Best Friends," one of a series of pre-romance novels featuring identical twin sisters. Interviews six girls using the Symbolic Representation Interview (SRI) about the good girl/bad girl dichotomy in novels and other media. Provides comments by Tom Romano and Diana Mitchell.…

What Positive Lessons Have You Learned from English Class about Working with Other People?

ERIC Educational Resources Information Center

Cook, Bailey; Keefe, Bailey; Gray, Angela; Li, Justin; Miller, Kevin

2010-01-01

This article provides a forum for students to share their experiences and lessons learned from English class about working with other people. The first author thinks it is a good idea to have split-level classes because it opens up new opportunities to meet people and teaches one many good lessons about working with other people. The second author…

Compliance and stress sensitivity of spur gear teeth

NASA Technical Reports Server (NTRS)

Cornell, R. W.

1983-01-01

The magnitude and variation of tooth pair compliance with load position affects the dynamics and loading significantly, and the tooth root stressing per load varies significantly with load position. Therefore, the recently developed time history, interactive, closed form solution for the dynamic tooth loads for both low and high contact ratio spur gears was expanded to include improved and simplified methods for calculating the compliance and stress sensitivity for three involute tooth forms as a function of load position. The compliance analysis has an improved fillet/foundation. The stress sensitivity analysis is a modified version of the Heywood method but with an improvement in the magnitude and location of the peak stress in the fillet. These improved compliance and stress sensitivity analyses are presented along with their evaluation using test, finite element, and analytic transformation results, which showed good agreement.

Comparative evaluation of the COBAS AmpliPrep/COBAS TaqMan HIV type 1 test (CAP/CTM) and VERSANT HIV type 1 RNA 3.0 assay (bDNA) for quantifying HIV type 1 viral loads in China.

PubMed

Xu, Sihong; Song, Aijing; Nie, Jianhui; Li, Xiuhua; Li, Jingyun; Bao, Zuoyi; Wang, Youchun

2008-11-01

In the present study, 277 clinical samples from untreated and treated HIV-1-infected patients with different clades were used to assess the agreement between the COBAS AmpliPrep/COBAS TaqMan HIV-1 test (CAP/CTM) and VERSANT HIV-1 RNA 3.0 Assay (bDNA). A qualitative comparison of the results of the two assays showed concordance for 255 positive and 15 negative samples (94.95%, kappa = 0.798). However, seven samples with viral loads close to the lower limit of detection for CAP/CTM were negative by bDNA. A significant correlation (r = 0.881, p < 0.001) was observed for 253 samples with viral loads within the dynamic ranges of the two assays, and Bland-Altman analysis showed good agreement (96.05%) between the two assays for these 253 samples [mean (+/-2 SD), 0.389(-0.385, 1.163)]. Furthermore, ART drugs had no impact on the performances of the two assays. For samples with different clades predominant in China, the fitted regression line differed significantly from the line of equality, although significant correlations (r = 0.850-0.891, p < 0.001) and good agreements (92.86-97.25%) were found for the two assays. The mean differences for clade B' and BC samples were significant (p < 0.01). Good precision for clade B' samples was achieved for the CAP/CTM (CV: 20.73%) and bDNA (CV: 12.19%) assays. Furthermore, for clades B', BC, and AE, both assays exhibited good linearities (r = 0.9773-0.9998). Thus, the CAP/CTM and bDNA assays could be useful for quantifying HIV-1 RNA in routine clinical samples and monitoring viral loads in treated and untreated HIV-infected patients in China.

Use of herd information for predicting Salmonella status in pig herds.

PubMed

Baptista, F M; Alban, L; Nielsen, L R; Domingos, I; Pomba, C; Almeida, V

2010-11-01

Salmonella surveillance-and-control programs in pigs are highly resource demanding, so alternative cost-effective approaches are desirable. The aim of this study was to develop and evaluate a tool for predicting the Salmonella test status in pig herds based on herd information collected from 108 industrial farrow-to-finish pig herds in Portugal. A questionnaire including known risk factors for Salmonella was used. A factor analysis model was developed to identify relevant factors that were then tested for association with Salmonella status. Three factors were identified and labelled: general biosecurity (factor 1), herd size (factor 2) and sanitary gap implementation (factor 3). Based on the loadings in factor 1 and factor 3, herds were classified according to their biosecurity practices. In total, 59% of the herds had a good level of biosecurity (interpreted as a loading below zero in factor 1) and 37% of the farms had good biosecurity and implemented sanitary gap (loading below zero in factor 1 and loading above zero in factor 3). This implied that they, among other things, implemented preventive measures for visitors and workers entering the herd, controlled biological vectors, had hygiene procedures in place, water quality assessment, and sanitary gap in the fattening and growing sections. In total, 50 herds were tested for Salmonella. Logistic regression analysis showed that factor 1 was significantly associated with Salmonella test status (P = 0.04). Herds with poor biosecurity had a higher probability of testing Salmonella positive compared with herds with good biosecurity. This study shows the potential for using herd information to classify herds according to their Salmonella status in the absence of good testing options. The method might be used as a potentially cost-effective tool for future development of risk-based approaches to surveillance, targeting interventions to high-risk herds or differentiating sampling strategies in herds with different levels of infection. © 2010 Blackwell Verlag GmbH.

Combination chemotherapy of doxorubicin, all-trans retinoic acid and low molecular weight heparin based on self-assembled multi-functional polymeric nanoparticles

NASA Astrophysics Data System (ADS)

Zhang, Ting; Xiong, Hui; Zohra Dahmani, Fatima; Sun, Li; Li, Yuanke; Yao, Li; Zhou, Jianping; Yao, Jing

2015-04-01

Based on the complementary effects of doxorubicin (DOX), all-trans retinoic acid (ATRA) and low molecular weight heparin (LMWH), the combination therapy of DOX, ATRA and LMWH was expected to exert the enhanced anti-tumor effects and reduce the side effects. In this study, amphiphilic LMWH-ATRA conjugate was synthesized for encapsulating the DOX. In this way, DOX, ATRA and LMWH were assembled into a single nano-system by both chemical and physical modes to obtain a novel anti-tumor targeting drug delivery system that can realize the simultaneous delivery of multiple drugs with different properties to the tumor. LMWH-ATRA nanoparticles exhibited good loading capacities for DOX with excellent physico-chemical properties, good biocompatibility, and good differentiation-inducing activity and antiangiogenic activity. The drug-loading capacity was up to 18.7% with an entrapment efficiency of 78.8%. It was also found that DOX-loaded LMWH-ATRA nanoparticles (DHR nanoparticles) could be efficiently taken up by tumor cells via endocytic pathway, and mainly distributed in cytoplasm at first, then transferred into cell nucleus. Cell viability assays suggested that DHR nanoparticles maintained the cytotoxicity effect of DOX on MCF-7 cells. Moreover, the in vivo imaging analysis indicated that DiR-loaded LMWH-ATRA nanoparticles could target the tumor more effectively as compared to free DiR. Furthermore, DHR nanoparticles possessed much higher anticancer activity and reduced side effects compared to free drugs solution. These results suggested that DHR nanoparticles could be considered as a promising targeted delivery system for combination cancer chemotherapy with lower adverse effects.

Computational Modelling of Patella Femoral Kinematics During Gait Cycle and Experimental Validation

NASA Astrophysics Data System (ADS)

Maiti, Raman

2016-06-01

The effect of loading and boundary conditions on patellar mechanics is significant due to the complications arising in patella femoral joints during total knee replacements. To understand the patellar mechanics with respect to loading and motion, a computational model representing the patella femoral joint was developed and validated against experimental results. The computational model was created in IDEAS NX and simulated in MSC ADAMS/VIEW software. The results obtained in the form of internal external rotations and anterior posterior displacements for a new and experimentally simulated specimen for patella femoral joint under standard gait condition were compared with experimental measurements performed on the Leeds ProSim knee simulator. A good overall agreement between the computational prediction and the experimental data was obtained for patella femoral kinematics. Good agreement between the model and the past studies was observed when the ligament load was removed and the medial lateral displacement was constrained. The model is sensitive to ±5 % change in kinematics, frictional, force and stiffness coefficients and insensitive to time step.

Computational Modelling of Patella Femoral Kinematics During Gait Cycle and Experimental Validation

NASA Astrophysics Data System (ADS)

Maiti, Raman

2018-06-01

The effect of loading and boundary conditions on patellar mechanics is significant due to the complications arising in patella femoral joints during total knee replacements. To understand the patellar mechanics with respect to loading and motion, a computational model representing the patella femoral joint was developed and validated against experimental results. The computational model was created in IDEAS NX and simulated in MSC ADAMS/VIEW software. The results obtained in the form of internal external rotations and anterior posterior displacements for a new and experimentally simulated specimen for patella femoral joint under standard gait condition were compared with experimental measurements performed on the Leeds ProSim knee simulator. A good overall agreement between the computational prediction and the experimental data was obtained for patella femoral kinematics. Good agreement between the model and the past studies was observed when the ligament load was removed and the medial lateral displacement was constrained. The model is sensitive to ±5 % change in kinematics, frictional, force and stiffness coefficients and insensitive to time step.

A simple reduction-sensitive micelles co-delivery of paclitaxel and dasatinib to overcome tumor multidrug resistance

PubMed Central

Lu, Xiao; He, Jing; Jin, Shidai

2017-01-01

Multidrug resistance (MDR) is one of the major obstacles in successful chemotherapy. The combination of chemotherapy drugs and multidrug-resistant reversing agents for treating MDR tumor is a good strategy to overcome MDR. In this work, we prepared the simple redox-responsive micelles based on mPEG-SS-C18 as a co-delivery system to load the paclitaxel (PTX) and dasatinib (DAS) for treatment of MCF-7/ADR cells. The co-loaded micelles had a good dispersity and a spherical shape with a uniform size distribution, and they could quickly disassemble and rapidly release drugs under the reduction environment. Compared with MCF-7 cells, the DAS and PTX co-loaded redox-sensitive micelle (SS-PDNPs) showed stronger cytotoxicity and a more improving intracellular drug concentration than other drug formulations in MCF-7/ADR cells. In summary, the results suggested that the simple co-delivery micelles of PTX and DAS possessed significant potential to overcome drug resistance in cancer therapy. PMID:29138561

Your Dialysis Care Team

MedlinePlus

... A to Z Health Guide Your Dialysis Care Team Tweet Share Print Email Good health care is ... dialyzers (artificial kidneys) for reuse. Vascular Access Care Team If you are a hemodialysis patient, another group ...

Magnetic Random Access Memory for Embedded Computing

DTIC Science & Technology

2007-10-29

layer, w he free layer hose resistan .  ce  2. Develop and model  data  storage circuits  based  on the MTJ cells. 3. Integrated the MTJ cells into a CMOS...suggested the two methods shown in Fig. 4.5 [95]. The circuit shown at the top of the figure uses NMOS pass transistors to load data , which is the simplest... method but requires careful design to avoid charge sharing and accommodate the data -dependent loading seen at the DATA input. With additional

Open Data in Global Environmental Research: The Belmont Forum's Open Data Survey.

PubMed

Schmidt, Birgit; Gemeinholzer, Birgit; Treloar, Andrew

2016-01-01

This paper presents the findings of the Belmont Forum's survey on Open Data which targeted the global environmental research and data infrastructure community. It highlights users' perceptions of the term "open data", expectations of infrastructure functionalities, and barriers and enablers for the sharing of data. A wide range of good practice examples was pointed out by the respondents which demonstrates a substantial uptake of data sharing through e-infrastructures and a further need for enhancement and consolidation. Among all policy responses, funder policies seem to be the most important motivator. This supports the conclusion that stronger mandates will strengthen the case for data sharing.

Information-sharing tendency on Twitter and time evolution of tweeting

NASA Astrophysics Data System (ADS)

Kwon, H. W.; Kim, H. S.; Lee, K.; Choi, M. Y.

2013-03-01

While topics on Twitter may be categorized according to their predictability and sustainability, some topics have characteristics depending on the time scale. Here we propose a good measure for the transition of sustainability, which we call the information-sharing tendency, and find that the unpredictability on Twitter is provoked by the exposure of Twitter users to external environments, e.g., mass media and other social network services. In addition, it is demonstrated that the numbers of articles and comments on on-line newspapers serve as plausible measures of exposure. From such measures of exposure, the time evolution of tweeting can be described, when the information-sharing tendency is known.

Modeling of light dynamic cone penetration test - Panda 3 ® in granular material by using 3D Discrete element method

NASA Astrophysics Data System (ADS)

Tran, Quoc Anh; Chevalier, Bastien; Benz, Miguel; Breul, Pierre; Gourvès, Roland

2017-06-01

The recent technological developments made on the light dynamic penetration test Panda 3 ® provide a dynamic load-penetration curve σp - sp for each impact. This curve is influenced by the mechanical and physical properties of the investigated granular media. In order to analyze and exploit the load-penetration curve, a numerical model of penetration test using 3D Discrete Element Method is proposed for reproducing tests in dynamic conditions in granular media. All parameters of impact used in this model have at first been calibrated by respecting mechanical and geometrical properties of the hammer and the rod. There is a good agreement between experimental results and the ones obtained from simulations in 2D or 3D. After creating a sample, we will simulate the Panda 3 ®. It is possible to measure directly the dynamic load-penetration curve occurring at the tip for each impact. Using the force and acceleration measured in the top part of the rod, it is possible to separate the incident and reflected waves and then calculate the tip's load-penetration curve. The load-penetration curve obtained is qualitatively similar with that obtained by experimental tests. In addition, the frequency analysis of the measured signals present also a good compliance with that measured in reality when the tip resistance is qualitatively similar.

Preparation and evaluation of β-glucan hydrogel prepared by the radiation technique for drug carrier applications.

PubMed

Park, Jong-Seok; Lim, Youn-Mook; Baik, Jae; Jeong, Jin-Oh; An, Sung-Jun; Jeong, Sung-In; Gwon, Hui-Jeong; Khil, Myung-Seob

2018-06-14

β-Glucan can provide excellent environment to apply to drug carrier due to its immunological and anti-inflammatory effect. Minocycline hydrochloride (MH) has excellent oral bioavailability pharmacological properties. Specifically, MH is effectively absorbed into the gingiva for periodontal disease treatment. In this study, we attempt to develop MH loaded β-glucan hydrogel for periodontal disease treatment through radiation-crosslinking technique. In addition, MH loaded β-glucan hydrogels were tested for their cytotoxicity and antibacterial activity. Finally, we conducted an in vivo study to demonstrate the potential to prevent the invasion of bacteria to treat periodontal disease. The gel content and compressive strength of the β-glucan hydrogels increased as the β-glucan content and the absorbed dose (up to 7 kGy) increased. For a radiation dose of 7 kGy, the gelation and the compressive strength of a 6 wt% β-glucan hydrogel were approximately 92% and 270 kPa, respectively. As a drug, MH was consistently released from β-glucan hydrogels, reaching 80% at approximately 90 min. Furthermore, the MH loaded β-glucan hydrogels showed no cytotoxicity. The MH loaded β-glucan hydrogels exhibited good antibacterial activity against Porphyromonas gingivalis. In addition, MH loaded β-glucan hydrogel demonstrated the potential of a good capability to prevent the invasion of bacteria and to treat wounds. Copyright © 2017. Published by Elsevier B.V.

Perceived Causes of Job Stress among Special Educators in Selected Special and Integrated Schools in Nigeria

ERIC Educational Resources Information Center

Adeniyi, S. O.; Fakolade, Olufemi Aremum; Tella, Adeyinka

2010-01-01

Background: Efficient and effective performance on any job depend largely on good psychological well being of the workers as well as other factors such as conducive environment, good interpersonal relationship, adequate communication among staff and between staff and management, work load, remuneration and other physical and psychological boosting…

49 CFR 375.501 - Must I write up an order for service?

Code of Federal Regulations, 2011 CFR

2011-10-01

... 49 Transportation 5 2011-10-01 2011-10-01 false Must I write up an order for service? 375.501... TRANSPORTATION OF HOUSEHOLD GOODS IN INTERSTATE COMMERCE; CONSUMER PROTECTION REGULATIONS Pick Up of Shipments of Household Goods Before Loading § 375.501 Must I write up an order for service? (a) Before you receive a...

Fatigue Analysis of Magnesium Alloys Components for Car Industry

NASA Astrophysics Data System (ADS)

Marsavina, Liviu; Rusu, Lucian; Șerban, Dan Andrei; Negru, Radu Marcel; Cernescu, Anghel

2017-12-01

The use of magnesium alloys in the automotive industry increased in the last decade because of their low weight and relative good mechanical properties. However, the variable loading conditions require a good fatigue behavior. This paper summaries the fatigue properties of magnesium alloys and presents new fatigue curve results for die cast AM50 magnesium alloy.

Characteristics of sludge developed under different loading conditions during UASB reactor start-up and granulation.

PubMed

Ghangrekar, M M; Asolekar, S R; Joshi, S G

2005-03-01

Sludge characteristics available inside the reactor are of vital importance to maximize advantages of UASB reactor. The organic loading rate and sludge loading rate applied during start-up are among the important parameters to govern the sludge characteristics. Effects of these loading rates on the characteristics of the sludge developed are evaluated in six laboratory scale UASB reactors. The sludge characteristics considered are VSS/SS ratio of the sludge, sludge volume index, specific gravity, settling velocity and metal contents of the sludge developed under different loading rates. The experimental results indicate that, for developing good characteristics sludge, during primary start-up from flocculent inoculum sludge, organic loading rate and sludge loading rate should be in the range of 2.0-4.5 kg COD/m3 d and 0.1-0.25 kg COD/kg VSS d, respectively (chemical oxygen demand, COD). Proper sludge granulation and higher COD removal efficiency will be achieved by these loading rates.

A study on economic power dispatch grid connected PV power plant in educational institutes

NASA Astrophysics Data System (ADS)

Singh, Kuldip; Kumar, M. Narendra; Mishra, Satyasis

2018-04-01

India has main concerns on environment and escalation of fuel prices with respect to diminution of fossil fuel reserves and the major focus on renewable Energy sources for power generation to fulfill the present and future energy demand. Installation of PV power plants in the Educational Institutions has grown up drastically throughout India. More PV power plant are integrated with load and grid through net metering. Therefore, this paper is an analysis of the 75kWp PV plant at chosen buses, considering the need of minimum demand from the grid. The case study is carried out for different generation level throughout the day and year w.r.t load and climate changes, load sharing on grid. The economic dispatch model developed for PV plant integrated with Grid.

Optimal advertising and pricing decisions for complementary products

NASA Astrophysics Data System (ADS)

Taleizadeh, Ata Allah; Charmchi, Masoud

2015-03-01

Cooperative advertising is an agreement between a manufacturer and a retailer to share advertising cost at the local level. Previous studies have not investigated cooperative advertising for complementary products and their main focus was only on one good. In this paper, we study a two-echelon supply chain consisting of one manufacturer and one retailer with two complementary goods. The demand of each good is influenced not only by its price but also by the price of the other product. We use two game theory approaches to model this problem; Stackelberg manufacturer and Stackelberg retailer.

Sharing Patient-Generated Data in Clinical Practices: An Interview Study.

PubMed

Zhu, Haining; Colgan, Joanna; Reddy, Madhu; Choe, Eun Kyoung

2016-01-01

Patients are tracking and generating an increasingly large volume of personal health data outside the clinic due to an explosion of wearable sensing and mobile health (mHealth) apps. The potential usefulness of these data is enormous as they can provide good measures of everyday behavior and lifestyle. However, how we can fully leverage patient-generated data (PGD) and integrate them in clinical practice is less clear. In this interview study, we aim to understand how patients and clinicians currently share patient-generated data in clinical care practice. From the study, we identified technical, social, and organizational challenges in sharing and fully leveraging patient-generated data in clinical practices. Our findings can provide researchers potential avenues for enablers and barriers in sharing patient-generated data in clinical settings.

An Improved Distributed Secondary Control Method for DC Microgrids With Enhanced Dynamic Current Sharing Performance

DOE Office of Scientific and Technical Information (OSTI.GOV)

Wang, Panbao; Lu, Xiaonan; Yang, Xu

This paper proposes an improved distributed secondary control scheme for dc microgrids (MGs), aiming at overcoming the drawbacks of conventional droop control method. The proposed secondary control scheme can remove the dc voltage deviation and improve the current sharing accuracy by using voltage-shifting and slope-adjusting approaches simultaneously. Meanwhile, the average value of droop coefficients is calculated, and then it is controlled by an additional controller included in the distributed secondary control layer to ensure that each droop coefficient converges at a reasonable value. Hence, by adjusting the droop coefficient, each participating converter has equal output impedance, and the accurate proportionalmore » load current sharing can be achieved with different line resistances. Furthermore, the current sharing performance in steady and transient states can be enhanced by using the proposed method. The effectiveness of the proposed method is verified by detailed experimental tests based on a 3 × 1 kW prototype with three interface converters.« less

A hybrid deterministic-probabilistic approach to model the mechanical response of helically arranged hierarchical strands

NASA Astrophysics Data System (ADS)

Fraldi, M.; Perrella, G.; Ciervo, M.; Bosia, F.; Pugno, N. M.

2017-09-01

Very recently, a Weibull-based probabilistic strategy has been successfully applied to bundles of wires to determine their overall stress-strain behaviour, also capturing previously unpredicted nonlinear and post-elastic features of hierarchical strands. This approach is based on the so-called "Equal Load Sharing (ELS)" hypothesis by virtue of which, when a wire breaks, the load acting on the strand is homogeneously redistributed among the surviving wires. Despite the overall effectiveness of the method, some discrepancies between theoretical predictions and in silico Finite Element-based simulations or experimental findings might arise when more complex structures are analysed, e.g. helically arranged bundles. To overcome these limitations, an enhanced hybrid approach is proposed in which the probability of rupture is combined with a deterministic mechanical model of a strand constituted by helically-arranged and hierarchically-organized wires. The analytical model is validated comparing its predictions with both Finite Element simulations and experimental tests. The results show that generalized stress-strain responses - incorporating tension/torsion coupling - are naturally found and, once one or more elements break, the competition between geometry and mechanics of the strand microstructure, i.e. the different cross sections and helical angles of the wires in the different hierarchical levels of the strand, determines the no longer homogeneous stress redistribution among the surviving wires whose fate is hence governed by a "Hierarchical Load Sharing" criterion.

Optimizing ROOT’s Performance Using C++ Modules

NASA Astrophysics Data System (ADS)

Vassilev, Vassil

2017-10-01

ROOT comes with a C++ compliant interpreter cling. Cling needs to understand the content of the libraries in order to interact with them. Exposing the full shared library descriptors to the interpreter at runtime translates into increased memory footprint. ROOT’s exploratory programming concepts allow implicit and explicit runtime shared library loading. It requires the interpreter to load the library descriptor. Re-parsing of descriptors’ content has a noticeable effect on the runtime performance. Present state-of-art lazy parsing technique brings the runtime performance to reasonable levels but proves to be fragile and can introduce correctness issues. An elegant solution is to load information from the descriptor lazily and in a non-recursive way. The LLVM community advances its C++ Modules technology providing an io-efficient, on-disk representation capable to reduce build times and peak memory usage. The feature is standardized as a C++ technical specification. C++ Modules are a flexible concept, which can be employed to match CMS and other experiments’ requirement for ROOT: to optimize both runtime memory usage and performance. Cling technically “inherits” the feature, however tweaking it to ROOT scale and beyond is a complex endeavor. The paper discusses the status of the C++ Modules in the context of ROOT, supported by few preliminary performance results. It shows a step-by-step migration plan and describes potential challenges which could appear.

Assessing risk of non-compliance of phosphorus standards for lakes in England and Wales

NASA Astrophysics Data System (ADS)

Duethmann, D.; Anthony, S.; Carvalho, L.; Spears, B.

2009-04-01

High population densities, use of inorganic fertilizer and intensive livestock agriculture have increased phosphorus loads to lakes, and accelerated eutrophication is a major pressure for many lakes. The EC Water Framework Directive (WFD) requires that good chemical and ecological quality is restored in all surface water bodies by 2015. Total phosphorus (TP) standards for lakes in England and Wales have been agreed recently, and our aim was to estimate what percentage of lakes in England and Wales is at risk of failing these standards. With measured lake phosphorus concentrations only being available for a small number of lakes, such an assessment had to be model based. The study also makes a source apportionment of phosphorus inputs into lakes. Phosphorus loads were estimated from a range of sources including agricultural loads, sewage effluents, septic tanks, diffuse urban sources, atmospheric deposition, groundwater and bank erosion. Lake phosphorus concentrations were predicted using the Vollenweider model, and the model framework was satisfactorily tested against available observed lake concentration data. Even though predictions for individual lakes remain uncertain, results for a population of lakes are considered as sufficiently robust. A scenario analysis was carried out to investigate to what extent reductions in phosphorus loads would increase the number of lakes achieving good ecological status in terms of TP standards. Applying the model to all lakes in England and Wales greater than 1 ha, it was calculated that under current conditions roughly two thirds of the lakes would fail the good ecological status with respect to phosphorus. According to our estimates, agricultural phosphorus loads represent the most frequent dominant source for the majority of catchments, but diffuse urban runoff also is important in many lakes. Sewage effluents are the most frequent dominant source for large lake catchments greater than 100 km². The evaluation in terms of total load can be misleading in terms of what sources need to be tackled by catchment management for most of the lakes. For example sewage effluents are responsible for the majority of the total load but are the dominant source in only a small number of larger lake catchments. If loads from all sources were halved this would potentially increase the number of complying lakes to two thirds but require substantial measures to reduce phosphorus inputs to lakes. For agriculture, required changes would have to go beyond improvements of agricultural practise, and need to include reducing the intensity of land use. The time required for many lakes to respond to reduced nutrient loading is likely to extend beyond the current timelines of the WFD due to internal loading and biological resistances.

Identification of Load Categories in Rotor System Based on Vibration Analysis

PubMed Central

Yang, Zhaojian

2017-01-01

Rotating machinery is often subjected to variable loads during operation. Thus, monitoring and identifying different load types is important. Here, five typical load types have been qualitatively studied for a rotor system. A novel load category identification method for rotor system based on vibration signals is proposed. This method is a combination of ensemble empirical mode decomposition (EEMD), energy feature extraction, and back propagation (BP) neural network. A dedicated load identification test bench for rotor system was developed. According to loads characteristics and test conditions, an experimental plan was formulated, and loading tests for five loads were conducted. Corresponding vibration signals of the rotor system were collected for each load condition via eddy current displacement sensor. Signals were reconstructed using EEMD, and then features were extracted followed by energy calculations. Finally, characteristics were input to the BP neural network, to identify different load types. Comparison and analysis of identifying data and test data revealed a general identification rate of 94.54%, achieving high identification accuracy and good robustness. This shows that the proposed method is feasible. Due to reliable and experimentally validated theoretical results, this method can be applied to load identification and fault diagnosis for rotor equipment used in engineering applications. PMID:28726754

Effects of vegetation and sewage load on mangrove crab condition using experimental mesocosms

NASA Astrophysics Data System (ADS)

Amaral, Valter; Penha-Lopes, Gil; Paula, José

2009-09-01

Constructed wetlands, especially mangroves, have been studied for their usefulness in sewage treatment but the effects of mangrove vegetation and a sewage load on mangrove macrofauna have been given little attention. Ocypodid crabs are important components of mangrove forests and constitute good bioindicators of the functioning of the ecosystem as a whole. In constructed mangrove mesocosms, three vegetation treatments (bare substratum, and Avicennia marina and Rhizophora mucronata seedlings) were subjected to 0, 20, 60 and 100% sewage loads from a nearby hotel. The physiological condition of introduced Uca annulipes and Uca inversa was evaluated in terms of their RNA/DNA ratio after one, five and twelve months, and used as an indicator of ecological function in the system. Crab condition in 0% sewage load was similar to that of wild crabs throughout, suggesting no significant effects of the mesocosms on their RNA/DNA ratio. Overall, both species coped well with the administered sewage loads, suggesting good ecological function in the system. Both species manifested similar patterns in RNA/DNA ratio, being more affected by seasonal fluctuations than by sewage load and vegetation presence and type. Higher RNA/DNA ratios were recorded in the long compared to the short rainy season. Sewage enhanced crab condition in the bare substratum and R. mucronata treatments, especially after one year, probably as a result of enhanced food availability. Uca inversa may be more sensitive to sewage pollution than U. annulipes. In A. marina, no difference in crab condition was observed between sewage loads, and this mangrove yielded the best reduction in sewage impacts. Our results support the usefulness of constructed mangrove areas in sewage treatment, especially if planted with A. marina and inhabited by physiologically healthy ocypodid crabs to enhance the system's performance.

Parasitic load and histological aspects in different regions of the spleen of dogs with visceral leishmaniasis.

PubMed

Bagues, Naiara Carvalho Teixeira; Pinheiro, Cristiane Garboggini Melo de; Bastos, Leila Andrade; Fraga, Deborah Bittencourt Mothé; Veras, Patrícia Sampaio Tavares; Pontes-de-Carvalho, Lain Carlos; Dos-Santos, Washington L C; Oliveira, Geraldo Gileno de Sá

2018-02-01

Leishmania infantum causes from subclinical infection to severe disease in humans and dogs. The spleen is one of the organs most affected by the infection. Although evidence exists that the parasitic load distribution and histological alterations may not be homogeneous in the affected organs of naturally infected individuals, it has not been formally demonstrated using the current techniques used for studying the disease. In six dogs naturally infected with Leishmania, parasitic load and histological changes were compared in samples collected from the lower, middle and upper third of the spleen. Parasitic load in the spleen of the group of dogs was variable, revealing a difference of 61 times between animals with the lowest and the highest parasitism. The set of parasitic load values of each dog showed a cluster trend, when compared to the other animals. Nevertheless, the parasitic load values of each dog showed a variation ranging from 3.2 to 34.7 times between lowest and highest value. Histological changes showed recognizable variation in frequency (granulomas) or intensity (perisplenitis) in the spleen of 2 out of the 6 dogs. The agreement of histological findings between samples collected from the different thirds of the spleen was good (kappa coeficient, 0.61-0.80) very good (0.81-0.99) or perfect (1.00), for most of the parameters analyzed. Variability of parasitic load and, to a lesser extent, histological changes in spleen of dogs with visceral leishmaniasis is observed. Such variability may be taken in account in the design of studies on pathogenesis, vaccine and therapeutic drug development. Copyright © 2017 Elsevier Ltd. All rights reserved.

China's international trade and air pollution: 2000 - 2009

NASA Astrophysics Data System (ADS)

Ni, Ruijing; Lin, Jintai; Pan, Da; Wang, Jingxu; Yan, Yingying; Zhang, Qiang

2016-04-01

As the world's top trading country, China is now the most polluted country. However, a large portion of pollution produced in China is associated with its production of goods for foreign consumption via international trade. Along with China's rapid economic growth in recent years, its economic-trade structure and volume has been changing all the time, resulting in large changes in total emissions and the shares of trade-related emissions. Here, we assess the influence of China's changing total and export-related emissions between 2000 and 2009 on its atmospheric pollution loadings and transport, by exploiting simulations of a global chemical transport model GEOS-Chem. We find that both air pollution related to Chinese exports (PRE) which including nitrogen oxides (NOx), sulfur dioxide (SO2), carbon monoxide (CO), black carbon (BC), and primary organic aerosol (POA), and its share in total Chinese pollution have experienced continuous rapid growth until 2007, exposing more and more people to severely polluted air. After 2007, PRE decreases due to strengthened emission controls accompanied by declined exports as a result of the global financial crisis. Although production for exports contribute less than 35% SO2 over China in any year, the increasing trend of trade-related SO2 contributes 51% of integral trend. The changing PRE of China also affects its downwind regions such as the western United States. The contribution of export-related Chinese pollution to surface sulfate concentrations over the western United States has increased from 3% in 2000 to 12% in 2007. Overall, we find that the interannual variation of trade and associated production is a critical factor driving the trend of pollution over China and its downwind regions.

Polygenic risk score of sporadic late-onset Alzheimer's disease reveals a shared architecture with the familial and early-onset forms.

PubMed

Cruchaga, Carlos; Del-Aguila, Jorge L; Saef, Benjamin; Black, Kathleen; Fernandez, Maria Victoria; Budde, John; Ibanez, Laura; Deming, Yuetiva; Kapoor, Manav; Tosto, Giuseppe; Mayeux, Richard P; Holtzman, David M; Fagan, Anne M; Morris, John C; Bateman, Randall J; Goate, Alison M; Harari, Oscar

2018-02-01

To determine whether the extent of overlap of the genetic architecture among the sporadic late-onset Alzheimer's Disease (sLOAD), familial late-onset AD (fLOAD), sporadic early-onset AD (sEOAD), and autosomal dominant early-onset AD (eADAD). Polygenic risk scores (PRSs) were constructed using previously identified 21 genome-wide significant loci for LOAD risk. We found that there is an overlap in the genetic architecture among sEOAD, fLOAD, and sLOAD. The highest association of the PRS and risk (odds ratio [OR] = 2.27; P = 1.29 × 10 -7 ) was observed in sEOAD, followed by fLOAD (OR = 1.75; P = 1.12 × 10 -7 ) and sLOAD (OR = 1.40; P = 1.21 × 10 -3 ). The PRS was associated with cerebrospinal fluid ptau 181 -Aβ 42 on eADAD (P = 4.36 × 10 -2 ). Our analysis confirms that the genetic factors identified for LOAD modulate risk in sLOAD and fLOAD and also sEOAD cohorts. Specifically, our results suggest that the burden of these risk variants is associated with familial clustering and earlier onset of AD. Although these variants are not associated with risk in the eADAD, they may be modulating age at onset. Copyright © 2017 the Alzheimer's Association. Published by Elsevier Inc. All rights reserved.

Evaluation of chromium oxide and molybdenum disulfide coatings in self-acting stops of an air-lubricated Rayleigh step thrust bearing

NASA Technical Reports Server (NTRS)

Nemeth, Z. N.

1974-01-01

Two coatings for a Rayleigh step thrust bearing were tested when coasting down and stopping under self-acting operation in air. The thrust bearing had an outside diameter of 8.9 cm (3.5 in.), an inside diameter of 5.4 cm (2.1 in.), and nine sectors. The load was 73 N (16.4 lbf). The load pressure was 19.1 kN/per square meter (2.77 lbf/per square inch) on the total thrust bearing area. The chromium oxide coating was good to 150 stops without bearing deterioration, and the molybdenum disulfide coating was good for only four stops before bearing deterioration. The molybdenum disulfide coated bearing failed after nine stops.

A root-mean-square approach for predicting fatigue crack growth under random loading

NASA Technical Reports Server (NTRS)

Hudson, C. M.

1981-01-01

A method for predicting fatigue crack growth under random loading which employs the concept of Barsom (1976) is presented. In accordance with this method, the loading history for each specimen is analyzed to determine the root-mean-square maximum and minimum stresses, and the predictions are made by assuming the tests have been conducted under constant-amplitude loading at the root-mean-square maximum and minimum levels. The procedure requires a simple computer program and a desk-top computer. For the eleven predictions made, the ratios of the predicted lives to the test lives ranged from 2.13 to 0.82, which is a good result, considering that the normal scatter in the fatigue-crack-growth rates may range from a factor of two to four under identical loading conditions.

Nitrogen loads from selected rivers in the Long Island Sound Basin, 2005–13, Connecticut and Massachusetts

USGS Publications Warehouse

Mullaney, John R.

2016-03-29

Total nitrogen loads at 14 water-quality monitoring stations were calculated by using discrete measurements of total nitrogen and continuous streamflow data for the period 2005–13 (water years 2006–13). Total nitrogen loads were calculated by using the LOADEST computer program.Overall, for water years 2006–13, streamflow in Connecticut was generally above normal. Total nitrogen yields ranged from 1,160 to 23,330 pounds per square mile per year. Total nitrogen loads from the French River at North Grosvenordale and the Still River at Brookfield Center, Connecticut, declined noticeably during the study period. An analysis of the bias in estimated loads indicated unbiased results at all but one station, indicating generally good fit for the LOADEST models.

Rolling moments in a trailing vortex flow field

NASA Technical Reports Server (NTRS)

Mcmillan, O. J.; Schwind, R. G.; Nielsen, J. N.; Dillenius, M. F. E.

1977-01-01

Pressure distributions are presented which were measured on a wing in close proximity to a tip vortex of known structure generated by a larger, upstream semispan wing. Overall loads calculated by integration of these pressures are checked by independent measurements made with an identical model mounted on a force balance. Several conventional methods of wing analysis are used to predict the loads on the following wing. Strip theory is shown to give uniformly poor results for loading distribution, although predictions of overall lift and rolling moment are sometimes acceptable. Good results are obtained for overall coefficients and loading distribution by using linearized pressures in vortex-lattice theory in conjunction with a rectilinear vortex. The equivalent relation from reverse-flow theory that can be used to give economic predictions for overall loads is presented.

Biaxial fatigue loading of notched composites

NASA Technical Reports Server (NTRS)

Francis, P. H.; Walrath, D. E.; Sims, D. F.; Weed, D. N.

1977-01-01

Thin walled, 2.54-cm (1-in.) diameter tubular specimens of T300/934 graphite/epoxy were fabricated and fatigue cycled in combinations of axial, torsional, and internal pressure loading. Two different four-ply layup configurations were tested: (0/90)S and (+ or - 45)S; all tubes contained a 0.48-cm (3/16-in.) diameter circular hole penetrating one wall midway along the tube length. S-N curves were developed to characterize fatigue behavior under pure axial, torsional, or internal pressure loading, as well as combined loading fatigue. A theory was developed based on the Hill plane stress model which enabled the S-N curve for combined stress states to be predicted from the S-N data for the uniaxial loading modes. Correlation of the theory with the experimental data proved to be remarkably good.

Enhancing Small-Business Opportunities in the DoD

DTIC Science & Technology

2008-01-01

to the DoD is below the small-business share of all industry sales. In some industries , including aircraft manufacturing and engineer - ing services...for goods not included in the Aircraft Manufacturing category as well as those not in another industry category for aircraft engine and engine parts...Purchases, % Small-Business Share of Industry , %, 20022007 2002 Aircraft Manufacturing 2.3 1.8 8.7 Engineering Services 13.6 16.9 20.3 R&D in the

Intra-household use and acceptability of Ready-to-Use-Supplementary-Foods distributed in Niger between July and December 2010.

PubMed

Cohuet, Sandra; Marquer, Caroline; Shepherd, Susan; Captier, Valérie; Langendorf, Céline; Ale, Franck; Phelan, Kevin; Manzo, Mahamane L; Grais, Rebecca F

2012-12-01

Few studies have looked at consumption of Ready-to-Use-Supplementary-Foods (RUSFs) during a nutritional emergency. Here, we describe the use and acceptability of RUSF within households in four districts of the region of Maradi, Niger during large scale preventive distributions with RUSF in 2010 targeted at children 6-35months of age. Our study comprised both quantitative and qualitative components to collect detailed information and to allow in-depth interviews. We performed a cross-sectional survey in 16 villages between two monthly distributions of RUSF (October-November 2010). All households with at least one child who received RUSF were included and a total of 1842 caregivers were interviewed using a structured questionnaire. Focus groups and individual interviews of 128 caregivers were conducted in eight of the selected villages. On average, 24.7% of households reported any sharing of RUSF within the household. Sharing practices outside the household remained rare. Most of the sharing reported occurred among children under 5years of age living in the household. On average, 91% of caregivers in all districts rated the child's appreciation of the products as good or very good. Program planning may need to explicitly accounting for the sharing of products among children under 5 within household. Copyright © 2012 Elsevier Ltd. All rights reserved.

Relating group size and posting activity of an online community of financial investors: Regularities and seasonal patterns

NASA Astrophysics Data System (ADS)

Racca, P.; Casarin, R.; Dondio, P.; Squazzoni, F.

2018-03-01

Group size can potentially affect collective activity and individual propensity to contribute to collective goods. Mancur Olson, in his Logic of Collective Action, argued that individual contribution to a collective good tends to be lower in groups of large size. Today, online communication platforms represent an interesting ground to study such collaborative dynamics under possibly different conditions (e.g., lower costs related to gather and share information). This paper examines the relationship between group size and activity in an online financial forum, where users invest time in sharing news, analysis and comments with other investors. We looked at about 24 million messages shared in more than ten years in the finanzaonline.com online forum. We found that the relationship between the number of active users and the number of posts shared by those users is of the power type (with exponent α > 1) and is subject to periodic fluctuations, mostly driven by hour-of-the-day and day-of-the-week effects. The daily patterns of the exponent showed a divergence between working week and weekend days. In general, the exponent was lower before noon, where investors are typically interested in market news, higher in the late afternoon, where markets are closing and investors need better understanding of the situation. Further research is needed, especially at the micro level, to dissect the mechanisms behind these regularities.

Instructions for Using Traffic Counters to Estimate Recreation Visits and Use

Treesearch

George A. James; Thomas H. Ripley

1963-01-01

Every manager of a recreation site needs three essential statistics: man-hours of use, number of visits, and peak loads. Man-hours of use are a good gauge of site wear and tear and service reaquirements. Visits reflect the number of impressions gained by people and hence provide an index to public approval or dissatisfaction, depending upon site condition. Peak load...

Simulation of fatigue fracture of TiNi shape memory alloy samples at cyclic loading in pseudoelastic state

NASA Astrophysics Data System (ADS)

Belyaev, Fedor S.; Volkov, Aleksandr E.; Evard, Margarita E.; Khvorov, Aleksandr A.

2018-05-01

Microstructural simulation of mechanical behavior of shape memory alloy samples at cyclic loading in the pseudoelastic state has been carried out. Evolution of the oriented and scattered deformation defects leading to damage accumulation and resulting in the fatigue fracture has been taken into account. Simulations were performed for the regime of loading imitating that for endovascular stents: preliminary straining, unloading, deformation up to some mean level of the strain and subsequent mechanical cycling at specified strain amplitude. Dependence of the fatigue life on the loading parameters (pre-strain, mean and amplitude values of strain) has been obtained. The results show a good agreement with available experimental data.

Using Trusted Resources

MedlinePlus

... any risk involved in sharing your information online. Social Media Social media sites (such as Facebook, Twitter) are good ways ... when you're seeking medical information, only follow social media from reputable sources. Many trusted organizations have social ...

Training on a Shoestring.

ERIC Educational Resources Information Center

Callahan, Madelyn R.

1995-01-01

Describes ways to train employees on a tight budget and cut training costs. Offers ideas such as using local colleges, negotiating outsourcing costs, using computers, making good use of experts, and sharing resources with other companies. (JOW)

12 CFR Part 745 - SHARE INSURANCE AND APPENDIX

Code of Federal Regulations, 2013 CFR

2013-01-01

..., payment orders of withdrawal, telephone or other electronic media transfers, or other similar items for... in good faith and in the regular course of business. (3) The account records of an insured credit...

12 CFR Part 745 - SHARE INSURANCE AND APPENDIX

Code of Federal Regulations, 2012 CFR

2012-01-01

..., payment orders of withdrawal, telephone or other electronic media transfers, or other similar items for... in good faith and in the regular course of business. (3) The account records of an insured credit...

Prevent Heartworms in Pets Year-Round

MedlinePlus

... Home For Consumers Consumer Updates Prevent Heartworms in Dogs, Cats, and Ferrets Year-Round Share Tweet Linkedin ... bad news: Heartworm disease can be fatal to dogs, cats, and ferrets. The good news: You can ...

Skilled nursing and rehabilitation facilities - choosing

MedlinePlus

... 000436.htm Choosing a skilled nursing and rehabilitation facility To use the sharing features on this page, ... your stay at the facility. Choosing the Right Facility for you It is always a good idea ...

Perceptual load influences selective attention across development.

PubMed

Couperus, Jane W

2011-09-01

Research suggests that visual selective attention develops across childhood. However, there is relatively little understanding of the neurological changes that accompany this development, particularly in the context of adult theories of selective attention, such as N. Lavie's (1995) perceptual load theory of attention. This study examined visual selective attention across development from 7 years of age to adulthood. Specifically, the author examined if changes in processing as a function of selective attention are similarly influenced by perceptual load across development. Participants were asked to complete a task at either low or high perceptual load while processing of an unattended probe stimulus was examined using event related potentials. Similar to adults, children and teens showed reduced processing of the unattended stimulus as perceptual load increased at the P1 visual component. However, although there were no qualitative differences in changes in processing, there were quantitative differences, with shorter P1 latencies in teens and adults compared with children, suggesting increases in the speed of processing across development. In addition, younger children did not need as high a perceptual load to achieve the same difference in performance between low and high perceptual load as adults. Thus, this study demonstrates that although there are developmental changes in visual selective attention, the mechanisms by which visual selective attention is achieved in children may share similarities with adults.

Global Cryptosporidium Loads from Livestock Manure

PubMed Central

2017-01-01

Understanding the environmental pathways of Cryptosporidium is essential for effective management of human and animal cryptosporidiosis. In this paper we aim to quantify livestock Cryptosporidium spp. loads to land on a global scale using spatially explicit process-based modeling, and to explore the effect of manure storage and treatment on oocyst loads using scenario analysis. Our model GloWPa-Crypto L1 calculates a total global Cryptosporidium spp. load from livestock manure of 3.2 × 1023 oocysts per year. Cattle, especially calves, are the largest contributors, followed by chickens and pigs. Spatial differences are linked to animal spatial distributions. North America, Europe, and Oceania together account for nearly a quarter of the total oocyst load, meaning that the developing world accounts for the largest share. GloWPa-Crypto L1 is most sensitive to oocyst excretion rates, due to large variation reported in literature. We compared the current situation to four alternative management scenarios. We find that although manure storage halves oocyst loads, manure treatment, especially of cattle manure and particularly at elevated temperatures, has a larger load reduction potential than manure storage (up to 4.6 log units). Regions with high reduction potential include India, Bangladesh, western Europe, China, several countries in Africa, and New Zealand. PMID:28654242

A Comparative Analysis of Wiki Discretionary Access Control in a CONOPS Environment

DTIC Science & Technology

2008-12-01

always light at the end of the tunnel . Last but not less, the author would like to share the success of the completion of this thesis research...modern clients (e.g. Blackberries , iPhones, tactical digital assistants like the TACTICOMP), wikis do not require extensive user training or loading of

Honeycomb chassis for electronic components

NASA Technical Reports Server (NTRS)

Read, W. S.; Stebbins, B. W.

1977-01-01

In new electronic chassis support, machined honeycomb members are used to change basic relationship between chassis and support structure. Improved chassis combines internal and external support and heat dissipation by altering chassis internal geometry. Honeycomb materials allow mechanical support and thermal load sharing to be combined at lower weight and lower cost than previous equipment.

Risky Business or Sharing the Load?--Social Flow in Collaborative Mobile Learning

ERIC Educational Resources Information Center

Ryu, Hokyoung; Parsons, David

2012-01-01

Mobile learning has been built upon the premise that we can transform traditional classroom or computer-based learning activities into a more ubiquitous and connected form of learning. Tentative outcomes from this assertion have been witnessed in many collaborative learning activities, but few analytic observations on what triggers this…

Quietly Sharing the Load? The Role of School Psychologists in Enabling Teacher Resilience

ERIC Educational Resources Information Center

Beltman, Susan; Mansfield, Caroline F.; Harris, Annabelle

2016-01-01

Teacher resilience is associated with positive student outcomes and plays an important role in teacher retention and well-being. School ecologies can enable the resilience of teachers, with prior research illustrating the importance of supportive colleagues, strong leadership, and positive school culture. There is limited research, however,…

33 CFR Appendix B to Part 277 - Hypothetical Example of Cost Apportionment

Code of Federal Regulations, 2013 CFR

2013-07-01

...) $165,489 I b. Fixed charges (owner's share) 284,460 II A fixed charge such as engineering, design and... new bridge is designed for increased loading and width greater than that of the old bridge. Therefore, the estimated annual maintenance cost was based on a hypothetical bridge designed, but not constructed...

33 CFR Appendix B to Part 277 - Hypothetical Example of Cost Apportionment

Code of Federal Regulations, 2014 CFR

2014-07-01

...) $165,489 I b. Fixed charges (owner's share) 284,460 II A fixed charge such as engineering, design and... new bridge is designed for increased loading and width greater than that of the old bridge. Therefore, the estimated annual maintenance cost was based on a hypothetical bridge designed, but not constructed...

33 CFR Appendix B to Part 277 - Hypothetical Example of Cost Apportionment

Code of Federal Regulations, 2010 CFR

2010-07-01

...) $165,489 I b. Fixed charges (owner's share) 284,460 II A fixed charge such as engineering, design and... new bridge is designed for increased loading and width greater than that of the old bridge. Therefore, the estimated annual maintenance cost was based on a hypothetical bridge designed, but not constructed...

33 CFR Appendix B to Part 277 - Hypothetical Example of Cost Apportionment

Code of Federal Regulations, 2011 CFR

2011-07-01

...) $165,489 I b. Fixed charges (owner's share) 284,460 II A fixed charge such as engineering, design and... new bridge is designed for increased loading and width greater than that of the old bridge. Therefore, the estimated annual maintenance cost was based on a hypothetical bridge designed, but not constructed...

33 CFR Appendix B to Part 277 - Hypothetical Example of Cost Apportionment

Code of Federal Regulations, 2012 CFR

2012-07-01

...) $165,489 I b. Fixed charges (owner's share) 284,460 II A fixed charge such as engineering, design and... new bridge is designed for increased loading and width greater than that of the old bridge. Therefore, the estimated annual maintenance cost was based on a hypothetical bridge designed, but not constructed...

Standing Naval Forces and Global Security

DTIC Science & Technology

1993-06-04

standards an- good engineering practices. The team submits a r:-,cr: to !PPC recommending that the prcject be accepted b NATO. 8. Audit . The...established. A system of common funds and trailing audits must be in effect to pay for the infrastructure. NATO infrastructure appears to be a good example to...Search And Rescue and maritime safety monitor marine polution 6. sharing maritime inteiiigence1 5 Commodore Bateman foresees coupling these activities or

A Comprehensive Internationalization Challenge: Learning from Failure or, When Your Best Just Isn't Good Enough

ERIC Educational Resources Information Center

Patton, Carl V.

2016-01-01

Why did our idea not work out? How did a program fail? Why did we get unintended consequences? Who is to blame? Could it be that our best just isn't good enough? There are many reasons policies, programs and projects fail. Failure can be informative if shared. This means that professionals should report on failures as well as successes. However,…

DEVELOPMENT OF ASME SECTION X CODE RULES FOR HIGH PRESSURE COMPOSITE HYDROGEN PRESSURE VESSELS WITH NON-LOAD SHARING LINERS

DOE Office of Scientific and Technical Information (OSTI.GOV)

Rawls, G.; Newhouse, N.; Rana, M.

2010-04-13

The Boiler and Pressure Vessel Project Team on Hydrogen Tanks was formed in 2004 to develop Code rules to address the various needs that had been identified for the design and construction of up to 15000 psi hydrogen storage vessel. One of these needs was the development of Code rules for high pressure composite vessels with non-load sharing liners for stationary applications. In 2009, ASME approved new Appendix 8, for Section X Code which contains the rules for these vessels. These vessels are designated as Class III vessels with design pressure ranging from 20.7 MPa (3,000 ps)i to 103.4 MPamore » (15,000 psi) and maximum allowable outside liner diameter of 2.54 m (100 inches). The maximum design life of these vessels is limited to 20 years. Design, fabrication, and examination requirements have been specified, included Acoustic Emission testing at time of manufacture. The Code rules include the design qualification testing of prototype vessels. Qualification includes proof, expansion, burst, cyclic fatigue, creep, flaw, permeability, torque, penetration, and environmental testing.« less

CFD Modelling of Bore Erosion in Two-Stage Light Gas Guns

NASA Technical Reports Server (NTRS)

Bogdanoff, D. W.

1998-01-01

A well-validated quasi-one-dimensional computational fluid dynamics (CFD) code for the analysis of the internal ballistics of two-stage light gas guns is modified to explicitly calculate the ablation of steel from the gun bore and the incorporation of the ablated wall material into the hydrogen working cas. The modified code is used to model 45 shots made with the NASA Ames 0.5 inch light gas gun over an extremely wide variety of gun operating conditions. Good agreement is found between the experimental and theoretical piston velocities (maximum errors of +/-2% to +/-6%) and maximum powder pressures (maximum errors of +/-10% with good igniters). Overall, the agreement between the experimental and numerically calculated gun erosion values (within a factor of 2) was judged to be reasonably good, considering the complexity of the processes modelled. Experimental muzzle velocities agree very well (maximum errors of 0.5-0.7 km/sec) with theoretical muzzle velocities calculated with loading of the hydrogen gas with the ablated barrel wall material. Comparison of results for pump tube volumes of 100%, 60% and 40% of an initial benchmark value show that, at the higher muzzle velocities, operation at 40% pump tube volume produces much lower hydrogen loading and gun erosion and substantially lower maximum pressures in the gun. Large muzzle velocity gains (2.4-5.4 km/sec) are predicted upon driving the gun harder (that is, upon using, higher powder loads and/or lower hydrogen fill pressures) when hydrogen loading is neglected; much smaller muzzle velocity gains (1.1-2.2 km/sec) are predicted when hydrogen loading is taken into account. These smaller predicted velocity gains agree well with those achieved in practice. CFD snapshots of the hydrogen mass fraction, density and pressure of the in-bore medium are presented for a very erosive shot.

Controlled release of antibiotics encapsulated in the electrospinning polylactide nanofibrous scaffold and their antibacterial and biocompatible properties

NASA Astrophysics Data System (ADS)

Wang, Shu-Dong; Zhang, Sheng-Zhong; Liu, Hua; Zhang, You-Zhu

2014-04-01

In this research, the drug loaded polylactide nanofibers are fabricated by electrospinning. Morphology, microstructure and mechanical properties are characterized. Properties and mechanism of the controlled release of the nanofibers are investigated. The results show that the drug loaded polylactide nanofibers do not show dispersed phase, and there is a good compatibility between polylactide and drugs. FTIR spectra show that drugs are encapsulated inside the polylactide nanofibers, and drugs do not break the structure of polylcatide. Flexibility of drug loaded polylactide scaffolds is higher than that of the pure polylactide nanofibers. Release rate of the drug loaded nanofibers is significantly slower than that of the drug powder. Release rate increases with the increase of the drugs’ concentration. The research mechanism suggests a typical diffusion-controlled release of the three loaded drugs. Antibacterial and cell culture show that drug loaded nanofibers possess effective antibacterial activity and biocompatible properties.

Flight performance, energetics and water turnover of tippler pigeons with a harness and dorsal load

USGS Publications Warehouse

Gessaman, J.A.; Workman, G.W.; Fuller, M.R.

1991-01-01

We measured carbon dioxide production and water efflux of 12 tippler pigeons (Columba spp.) during seven experimental flights using the doubly labeled water (DLW) method. Prior to the experiment birds were randomly assigned to one of two groups. One group flew as controls (no load or harness) on all seven flights. The other group wore a harness on two flights, a dorsal load/harness package (weighing about 5% of a bird's mass) on two flights, and they were without a load in three flights. Flight duration of pigeons with only a harness and with a dorsal load/harness package was 21 and 26% less, respectively, than the controls. Pigeons wearing a harness, or wearing a dorsal load/harness package lost water 50-90%, and 57-100% faster, respectively, than control pigeons. The mean CO2 production of pigeons wearing a harness or a load/harness package was not significantly different than pigeons without a harness or load. The small sample sizes and large variability in DLW measuremets precluded a good test of the energetic cost of flying with a harness and dorsal load.

Flight performance energetics and water turnovers of Tippler Pigeons with a harness and doorsal load

USGS Publications Warehouse

Gessaman, James A.; Workman, Gar W.; Fuller, Mark R.

1991-01-01

We measured carbon dioxide production and water efflux of 12 tippler pigeons (Columba spp.) during seven experimental flights using the doubly labeled water (DLW) method. Prior to the experiment birds were randomly assigned to one of two groups. One group flew as controls (no load or harness) on all seven flights. The other group wore a harness on two flights, a dorsal load/harness package (weighing about 5% of a birda??s mass) on two flights, and they were without a load in three flights. Plight duration of pigeons with only a harness and with a dorsal load/harness package was 21 and 26% less, respectively, than the controls. Pigeons wearing a harness, or wearing a dorsal load/harness package lost water 50-90%, and 57-100% faster, respectively, than control pigeons. The mean CO, production of pigeons wearing a harness or a load/harness package was not significantly different than pigeons without a harness or load. The small sample sizes and large variability in DLW measurements precluded a good test of the energetic cost of flying with a harness and dorsal load.

Experimental and Numerical Investigation on the Bearing and Failure Mechanism of Multiple Pillars Under Overburden

NASA Astrophysics Data System (ADS)

Zhou, Zilong; Chen, Lu; Zhao, Yuan; Zhao, Tongbin; Cai, Xin; Du, Xueming

2017-04-01

To reveal the mechanical response of a multi-pillar supporting system under external loads, compressive tests were carried out on single-pillar and double-pillar specimens. The digital speckle correlation method and acoustic emission technique were applied to record and analyse information of the deformation and failure processes. Numerical simulations with the software programme PFC2D were also conducted. In the compressive process of the double-pillar system, if both individual pillars have the same mechanical properties, each pillar deforms similarly and reaches the critical stable state almost simultaneously by sharing equal loads. If the two individual pillars have different mechanical properties, the pillar with higher elastic modulus or lower strength would be damaged and lose its bearing capacity firstly. The load would then be transferred to the other pillar under a load redistribution process. When the pillar with higher strength is strong enough, the load carried by the pillar system would increase again. However, the maximum bearing load of the double-pillar system is smaller than the sum of peak load of individual pillars. The study also indicates that the strength, elastic modulus, and load state of pillars all influence the supporting capacity of the pillar system. In underground space engineering, the appropriate choice of pillar dimensions and layout may play a great role in preventing the occurrence of cascading pillar failure.

Quantity and quality of phosphorus losses from an artificially drained lowland catchment

NASA Astrophysics Data System (ADS)

Nausch, Monika; Woelk, Jana; Kahle, Petra; Nausch, Günther; Leipe, Thomas; Lennartz, Bernd

2017-04-01

Currently, agricultural diffuse sources constitute the major portion of phosphorus (P) fluxes to the Baltic Sea and have to reach the good ecological status aimed by the Baltic Sea Action Plan and the Marine Strategy Framework Directive. The objective of this study was to uncover the change in phosphorus loading as well as in P fractions along the flow path of a mid-size river basin in order to derive risk assessment and management strategies for a sustainable P reduction. P-fractions and the mineral composition of particulate P were investigated in a sub-basin of the river Warnow, the second largest German catchment discharging to the Baltic Sea. Samples were collected from the sources (tile drain, ditch) and along the subsequent brook up to the river Warnow representing spatial scales of a few hectars up to 3300 km2. The investigations were performed during the discharge season from November 1th 2013 until April 30th 2014 covering a relative dry and mild winter period. We observed an increase of total phosphorus (TP) concentrations from 15.5 ± 3.9 µg L-1 in the drain outlet to 72.0 ± 7.2 µg L-1 in the river Warnow emphasizing the importance of sediment-bound P mobilization along the flow path. Particulate phosphorus (PP) of 36.6 - 61.2% accounted for the largest share of TP in the streams. Clay minerals and Fe(hydr)oxides were the main carrier of particle bound P followed by apatite. A transformation of dissolved inorganic phosphorus (DIP) into particulate organic P was observed in the river Warnow with the beginning of the growth season in February. Our investigations indicate that the overall P load could be reduced by half when PP is removed.

Food load manipulation ability shapes flight morphology in females of central-place foraging Hymenoptera

PubMed Central

2013-01-01

Background Ecological constraints related to foraging are expected to affect the evolution of morphological traits relevant to food capture, manipulation and transport. Females of central-place foraging Hymenoptera vary in their food load manipulation ability. Bees and social wasps modulate the amount of food taken per foraging trip (in terms of e.g. number of pollen grains or parts of prey), while solitary wasps carry exclusively entire prey items. We hypothesized that the foraging constraints acting on females of the latter species, imposed by the upper limit to the load size they are able to transport in flight, should promote the evolution of a greater load-lifting capacity and manoeuvrability, specifically in terms of greater flight muscle to body mass ratio and lower wing loading. Results Our comparative study of 28 species confirms that, accounting for shared ancestry, female flight muscle ratio was significantly higher and wing loading lower in species taking entire prey compared to those that are able to modulate load size. Body mass had no effect on flight muscle ratio, though it strongly and negatively co-varied with wing loading. Across species, flight muscle ratio and wing loading were negatively correlated, suggesting coevolution of these traits. Conclusions Natural selection has led to the coevolution of resource load manipulation ability and morphological traits affecting flying ability with additional loads in females of central-place foraging Hymenoptera. Release from load-carrying constraints related to foraging, which took place with the evolution of food load manipulation ability, has selected against the maintenance of a powerful flight apparatus. This could be the case since investment in flight muscles may have to be traded against other life-history traits, such as reproductive investment. PMID:23805850

Knee Joint Loading during Gait in Healthy Controls and Individuals with Knee Osteoarthritis

PubMed Central

Kumar, Deepak; Manal, Kurt T.; Rudolph, Katherine S.

2013-01-01

Objective People with knee osteoarthritis (OA) are thought to walk with high loads at the knee which are yet to be quantfied using modeling techniques that account for subject specific EMG patterns, kinematics and kinetics. The objective was to estimate medial and lateral loading for people with knee OA and controls using an approach that is sensitive to subject specific muscle activation patterns. Methods 16 OA and 12 control (C) subjects walked while kinematic, kinetic and EMG data were collected. Muscle forces were calculated using an EMG-Driven model and loading was calculated by balancing the external moments with internal muscle and contact forces Results OA subjects walked slower and had greater laxity, static and dynamic varus alignment, less flexion and greater knee adduction moment (KAM). Loading (normalized to body weight) was no different between the groups but OA subjects had greater absolute medial load than controls and maintained a greater %total load on the medial compartment. These patterns were associated with body mass, sagittal and frontal plane moments, static alignment and close to signficance for dynamic alignment. Lateral compartment unloading during mid-late stance was observed in 50% of OA subjects. Conclusions Loading for control subjects was similar to data from instrumented prostheses. Knee OA subjects had high medial contact loads in early stance and half of the OA cohort demonstared lateral compartment lift-off. Results suggest that interventions aimed at reducing body weight and dynamic malalignment might be effective in reducing medial compartment loading and establishing normal medio-lateral load sharing patterns. PMID:23182814

Knuckle-walking anteater: a convergence test of adaptation for purported knuckle-walking features of African Hominidae.

PubMed

Orr, Caley M

2005-11-01

Appeals to synapomorphic features of the wrist and hand in African apes, early hominins, and modern humans as evidence of knuckle-walking ancestry for the hominin lineage rely on accurate interpretations of those features as adaptations to knuckle-walking locomotion. Because Gorilla, Pan, and Homo share a relatively close common ancestor, the interpretation of such features is confounded somewhat by phylogeny. The study presented here examines the evolution of a similar locomotor regime in New World anteaters (order Xenarthra, family Myrmecophagidae) and uses the terrestrial giant anteater (Myrmecophaga tridactyla) as a convergence test of adaptation for purported knuckle-walking features of the Hominidae. During the stance phase of locomotion, Myrmecophaga transmits loads through flexed digits and a vertical manus, with hyperextension occurring at the metacarpophalangeal joints of the weight-bearing rays. This differs from the locomotion of smaller, arboreal anteaters of outgroup genera Tamandua and Cyclopes that employ extended wrist postures during above-branch quadrupedality. A number of features shared by Myrmecophaga and Pan and Gorilla facilitate load transmission or limit extension, thereby stabilizing the wrist and hand during knuckle-walking, and distinguish these taxa from their respective outgroups. These traits are a distally extended dorsal ridge of the distal radius, proximal expansion of the nonarticular surface of the dorsal capitate, a pronounced articular ridge on the dorsal aspects of the load-bearing metacarpal heads, and metacarpal heads that are wider dorsally than volarly. Only the proximal expansion of the nonarticular area of the dorsal capitate distinguishes knuckle-walkers from digitigrade cercopithecids, but features shared with digitigrade primates might be adaptive to the use of a vertical manus of some sort in the stance phase of terrestrial locomotion. The appearance of capitate nonarticular expansion and the dorsal ridge of the distal radius in the hominin lineage might be indicative of a knuckle-walking ancestry for bipedal hominins if interpreted within the biomechanical and phylogenetic context of hominid locomotor evolution. Copyright 2005 Wiley-Liss, Inc

Validation of the Dynamic Wake Meander model with focus on tower loads

NASA Astrophysics Data System (ADS)

Larsen, T. J.; Larsen, G. C.; Pedersen, M. M.; Enevoldsen, K.; Madsen, H. A.

2017-05-01

This paper presents a comparison between measured and simulated tower loads for the Danish offshore wind farm Nysted 2. Previously, only limited full scale experimental data containing tower load measurements have been published, and in many cases the measurements include only a limited range of wind speeds. In general, tower loads in wake conditions are very challenging to predict correctly in simulations. The Nysted project offers an improved insight to this field as six wind turbines located in the Nysted II wind farm have been instrumented to measure tower top and tower bottom moments. All recorded structural data have been organized in a database, which in addition contains relevant wind turbine SCADA data as well as relevant meteorological data - e.g. wind speed and wind direction - from an offshore mast located in the immediate vicinity of the wind farm. The database contains data from a period extending over a time span of more than 3 years. Based on the recorded data basic mechanisms driving the increased loading experienced by wind turbines operating in offshore wind farm conditions have been identified, characterized and modeled. The modeling is based on the Dynamic Wake Meandering (DWM) approach in combination with the state-of-the-art aeroelastic model HAWC2, and has previously as well as in this study shown good agreement with the measurements. The conclusions from the study have several parts. In general the tower bending and yaw loads show a good agreement between measurements and simulations. However, there are situations that are still difficult to match. One is tower loads of single-wake operation near rated ambient wind speed for single wake situations for spacing’s around 7-8D. A specific target of the study was to investigate whether the largest tower fatigue loads are associated with a certain downstream distance. This has been identified in both simulations and measurements, though a rather flat optimum is seen in the measurements.

Cognitive task load in a naval ship control centre: from identification to prediction.

PubMed

Grootjen, M; Neerincx, M A; Veltman, J A

Deployment of information and communication technology will lead to further automation of control centre tasks and an increasing amount of information to be processed. A method for establishing adequate levels of cognitive task load for the operators in such complex environments has been developed. It is based on a model distinguishing three load factors: time occupied, task-set switching, and level of information processing. Application of the method resulted in eight scenarios for eight extremes of task load (i.e. low and high values for each load factor). These scenarios were performed by 13 teams in a high-fidelity control centre simulator of the Royal Netherlands Navy. The results show that the method provides good prediction of the task load that will actually appear in the simulator. The model allowed identification of under- and overload situations showing negative effects on operator performance corresponding to controlled experiments in a less realistic task environment. Tools proposed to keep the operator at an optimum task load are (adaptive) task allocation and interface support.

Study on load test of 100m cross-reinforced deck type concrete box arch bridge

NASA Astrophysics Data System (ADS)

Shi, Jing Xian; Cheng, Ying Jie

2018-06-01

Found in the routine quality inspection of highway bridge that many vertical fractures on the main beam (10mT beam) of the steel reinforced concrete arch bridge near the hydropower station. In order to grasp the bearing capacity of this bridge under working conditions with cracks, the static load and dynamic load test of box arch bridge are carried out. The Midas civil theory is calculated by using the special plate trailer - 300 as the calculation load, and the deflection and stress of the critical section are tested by the equivalent cloth load in the test vehicle. The pulsation test, obstacles and no obstacle driving test were carried out. Experimental results show that the bridge under the condition of the test loads is in safe condition, main bearing component of the strength and stiffness meet the design requirements, the crack width does not increase, in the process of loading bridge overall work performance is good.

Water quality, hydrology, and the effects of changes in phosphorus loading to Pike Lake, Washington County, Wisconsin, with special emphasis on inlet-to-outlet short-circuiting

USGS Publications Warehouse

Rose, William J.; Robertson, Dale M.; Mergener, Elizabeth A.

2004-01-01

Simulations using water-quality models within the Wisconsin Lake Model Suite (WiLMS) indicated Pike Lake's response to 13 different phosphorus-loading scenarios. These scenarios included a base 'normal' year (2000) for which lake water quality and loading were known, six different percentage increases or decreases in phosphorus loading from controllable sources, and six different loading scenarios corresponding to specific management actions. Model simulations indicate that a 50-percent reduction in controllable loading sources would be needed to achieve a mesotrophic classification with respect to phosphorus, chlorophyll a, and Secchi depth (an index of water clarity). Model simulations indicated that short-circuiting of phosphorus from the inlet to the outlet was the main reason the water quality of the lake is good relative to the amount of loading from the Rubicon River and that changes in the percentage of inlet-to-outlet short-circuiting have a significant influence on the water quality of the lake.

Teething & Dental Hygiene for Young Children

MedlinePlus

... Living Listen Español Text Size Email Print Share Dental Health & Hygiene for Young Children Page Content Article ... and lead to future dental problems. Teaching Good Dental Habits The best way to protect your child's ...

Data quality improvements for FAA

DOT National Transportation Integrated Search

1997-09-30

Effective communication among air safety professionals is only as good as the information being communicated. Data sharing cannot be effective unless the data are relevant to aviation safety problems, and decisions based on faulty data are likely to ...

WHC significant lessons learned 1993--1995

DOE Office of Scientific and Technical Information (OSTI.GOV)

Bickford, J.C.

1997-12-12

A lesson learned as defined in DOE-STD-7501-95, Development of DOE Lessons Learned Programs, is: A ``good work practice`` or innovative approach that is captured and shared to promote repeat applications or an adverse work practice or experience that is captured and shared to avoid a recurrence. The key word in both parts of this definition is ``shared``. This document was published to share a wide variety of recent Hanford experiences with other DOE sites. It also provides a valuable tool to be used in new employee and continuing training programs at Hanford facilities and at other DOE locations. This manualmore » is divided into sections to facilitate extracting appropriate subject material when developing training modules. Many of the bulletins could be categorized into more than one section, however, so examination of other related sections is encouraged.« less

Preclinical and clinical in vitro in vivo correlation of an hGH dextran microsphere formulation.

PubMed

Vlugt-Wensink, K D F; de Vrueh, R; Gresnigt, M G; Hoogerbrugge, C M; van Buul-Offers, S C; de Leede, L G J; Sterkman, L G W; Crommelin, D J A; Hennink, W E; Verrijk, R

2007-12-01

To investigate the in vitro in vivo correlation of a sustained release formulation for human growth hormone (hGH) based on hydroxyethyl methacrylated dextran (dex-HEMA) microspheres in Pit-1 deficient Snell dwarf mice and in healthy human volunteers. A hGH-loaded microsphere formulation was developed and tested in Snell dwarf mice (pharmacodynamic study) and in healthy human volunteers (pharmacokinetic study). Single subcutaneous administration of the microspheres in mice resulted in a good correlation between hGH released in vitro and in vivo effects for the hGH-loaded microsphere formulation similar to daily injected hGH indicating a retained bioactivity. Testing the microspheres in healthy volunteers showed an increase (over 7-8 days) in hGH serum concentrations (peak concentrations: 1-2.5 ng/ml). A good in vitro in vivo correlation was obtained between the measured and calculated (from in vitro release data) hGH serum concentrations. Moreover, an increased serum concentration of biomarkers (insulin-like growth factor-I (IGF-I), IGF binding protein-3 (IGFBP-3) was found again indicating that bioactive hGH was released from the microspheres. Good in vitro in vivo correlations were obtained for hGH-loaded dex-HEMA microspheres, which is an important advantage in predicting the effect of the controlled drug delivery product in a clinical situations.

Preclinical and Clinical In Vitro In Vivo Correlation of an hGH Dextran Microsphere Formulation

PubMed Central

de Vrueh, R.; Gresnigt, M. G.; Hoogerbrugge, C. M.; van Buul-Offers, S. C.; de Leede, L. G. J.; Sterkman, L. G. W.; Crommelin, D. J. A.; Hennink, W. E.; Verrijk, R.

2007-01-01

Purpose To investigate the in vitro in vivo correlation of a sustained release formulation for human growth hormone (hGH) based on hydroxyethyl methacrylated dextran (dex-HEMA) microspheres in Pit-1 deficient Snell dwarf mice and in healthy human volunteers. Materials and Methods A hGH-loaded microsphere formulation was developed and tested in Snell dwarf mice (pharmacodynamic study) and in healthy human volunteers (pharmacokinetic study). Results Single subcutaneous administration of the microspheres in mice resulted in a good correlation between hGH released in vitro and in vivo effects for the hGH-loaded microsphere formulation similar to daily injected hGH indicating a retained bioactivity. Testing the microspheres in healthy volunteers showed an increase (over 7–8 days) in hGH serum concentrations (peak concentrations: 1–2.5 ng/ml). A good in vitro in vivo correlation was obtained between the measured and calculated (from in vitro release data) hGH serum concentrations. Moreover, an increased serum concentration of biomarkers (insulin-like growth factor-I (IGF-I), IGF binding protein-3 (IGFBP-3) was found again indicating that bioactive hGH was released from the microspheres. Conclusions Good in vitro in vivo correlations were obtained for hGH-loaded dex-HEMA microspheres, which is an important advantage in predicting the effect of the controlled drug delivery product in a clinical situations. PMID:17929148

Solar energy an investment in our nations energy and economic security

DOE Office of Scientific and Technical Information (OSTI.GOV)

Barnett, A.; Sklar, A.

1996-07-01

The solar energy industries are engaged in aggressive efforts to develop, validate, and deploy solar energy systems for a wide variety of applications in every sector of the economy. In many cases, efforts are in partnership with the United States Departmet of Energy (DOE) and it`s laboratories. These partnerships are heavily cost shared by industry and were entered into with good faith by companies and corporations willing to include their significant cost-share in their budget planning.

Device costs go under the knife. With four hospitals having won HHS' approval for gain-sharing to shave supply costs, some observers say it's just the beginning.

PubMed

Becker, Cinda

2005-02-21

HHS' inspector general's office recently had some good news for four hospitals--they can use gain-sharing programs to help cut spending on devices. Joane Goodroe, left, is the consultant who helped the facilities devise proposals with safeguards that could satisfy the feds' worries about violating antikickback laws. "This is about paying physicians to take on the extra job of of reducing costs," Goodroe says.

Open Data in Global Environmental Research: The Belmont Forum’s Open Data Survey

PubMed Central

Schmidt, Birgit; Gemeinholzer, Birgit; Treloar, Andrew

2016-01-01

This paper presents the findings of the Belmont Forum’s survey on Open Data which targeted the global environmental research and data infrastructure community. It highlights users’ perceptions of the term “open data”, expectations of infrastructure functionalities, and barriers and enablers for the sharing of data. A wide range of good practice examples was pointed out by the respondents which demonstrates a substantial uptake of data sharing through e-infrastructures and a further need for enhancement and consolidation. Among all policy responses, funder policies seem to be the most important motivator. This supports the conclusion that stronger mandates will strengthen the case for data sharing. PMID:26771577

The Effect of Nano Loading and Ultrasonic Compounding of EVA/LDPE/Nano-magnesium Hydroxide on Mechanical Properties and Distribution of Nano Particles

NASA Astrophysics Data System (ADS)

Azman, I. A.; Salleh, R. M.; Alauddin, S. M.; Shueb, M. I.

2018-05-01

Blends of Ethylene Vinyl Acetate (EVA) and Low-Density Polyethylene (LDPE) are promising composite which have good mechanical properties to environmental stress cracking. However, they lack fire resistant properties, which limits it usage in wire and cable industry. In order to improve flame retardancy ability, a range of nano-magnesium hydroxide (nano-MH) loading which is from 0 phr to maximum of 20 phr with ultrasonic extrusion 0-100 kHz frequencies have been introduced. Ultrasonic extrusion was used to improve the distribution of nano-MH. It was found that, 10 phr of nano loading with 100 kHz ultrasonic assisted has greater tensile strength compared to the nanocomposite without ultrasonication. Further increase of nano MH loading, will decrease the tensile properties. Better elongation at break was observed at10 phr nano-MH with the frequency of 50 kHz. The sample of 20 phr of nanoMH assisted with 50 kHz ultrasonic exhibits good flexural properties while 10 phr of nano-MH without the ultrasonic assisted demonstrates good in izod impact properties. From the evaluation of mechanical properties studied, it was found that 10 phr of nano-MH has shown the best performance among all the samples tested for EVA/LDPE/nano-MH composites. Transmission Electron Microscopy (TEM) has been conducted on 10 phr sample with different frequencies in order to observe the distribution of nano-MH particles. The sample with 100 kHz frequency shows more uniform dispersion of nano-MH in EVA/LDPE composites. This investigation indicates that the ultrasonic technology can enhance the mechanical properties studied as well as the dispersion of nano particles in the composite.

A comparison of queueing, cluster and distributed computing systems

NASA Technical Reports Server (NTRS)

Kaplan, Joseph A.; Nelson, Michael L.

1993-01-01

Using workstation clusters for distributed computing has become popular with the proliferation of inexpensive, powerful workstations. Workstation clusters offer both a cost effective alternative to batch processing and an easy entry into parallel computing. However, a number of workstations on a network does not constitute a cluster. Cluster management software is necessary to harness the collective computing power. A variety of cluster management and queuing systems are compared: Distributed Queueing Systems (DQS), Condor, Load Leveler, Load Balancer, Load Sharing Facility (LSF - formerly Utopia), Distributed Job Manager (DJM), Computing in Distributed Networked Environments (CODINE), and NQS/Exec. The systems differ in their design philosophy and implementation. Based on published reports on the different systems and conversations with the system's developers and vendors, a comparison of the systems are made on the integral issues of clustered computing.

Comparing CTH Simulations and Experiments on Explosively Loaded Rings

NASA Astrophysics Data System (ADS)

Braithwaite, C. H.; Aydelotte, B.; Thadhani, N. N.; Williamson, D. M.

2011-06-01

A series of experiments were conducted on explosively loaded rings for the purpose of studying fragmentation. In addition to the collection of fragments for analysis, the radial velocity of the expanding ring was measured with PDV and the arrangement was imaged using a high speed camera. Both the ring material and the material used as the explosive container were altered and the results compared with simulations performed in CTH. Good agreement was found between the simulations and the experiments. The maximum radial velocity attained was approximately 450 m/s, which was achieved through loading with a 5g PETN based charge.