Grid mapping: a novel method of signal quality evaluation on a single lead electrocardiogram.

PubMed

Li, Yanjun; Tang, Xiaoying

2017-12-01

Diagnosis of long-term electrocardiogram (ECG) calls for automatic and accurate methods of ECG signal quality estimation, not only to lighten the burden of the doctors but also to avoid misdiagnoses. In this paper, a novel waveform-based method of phase-space reconstruction for signal quality estimation on a single lead ECG was proposed by projecting the amplitude of the ECG and its first order difference into grid cells. The waveform of a single lead ECG was divided into non-overlapping episodes (T s  = 10, 20, 30 s), and the number of grids in both the width and the height of each map are in the range [20, 100] (N X  = N Y  = 20, 30, 40, … 90, 100). The blank pane ratio (BPR) and the entropy were calculated from the distribution of ECG sampling points which were projected into the grid cells. Signal Quality Indices (SQI) bSQI and eSQI were calculated according to the BPR and the entropy, respectively. The MIT-BIH Noise Stress Test Database was used to test the performance of bSQI and eSQI on ECG signal quality estimation. The signal-to-noise ratio (SNR) during the noisy segments of the ECG records in the database is 24, 18, 12, 6, 0 and - 6 dB, respectively. For the SQI quantitative analysis, the records were divided into three groups: good quality group (24, 18 dB), moderate group (12, 6 dB) and bad quality group (0, - 6 dB). The classification among good quality group, moderate quality group and bad quality group were made by linear support-vector machine with the combination of the BPR, the entropy, the bSQI and the eSQI. The classification accuracy was 82.4% and the Cohen's Kappa coefficient was 0.74 on a scale of N X  = 40 and T s  = 20 s. In conclusion, the novel grid mapping offers an intuitive and simple approach to achieving signal quality estimation on a single lead ECG.

Massive integration of diverse protein quality assessment methods to improve template based modeling in CASP11

PubMed Central

Cao, Renzhi; Bhattacharya, Debswapna; Adhikari, Badri; Li, Jilong; Cheng, Jianlin

2015-01-01

Model evaluation and selection is an important step and a big challenge in template-based protein structure prediction. Individual model quality assessment methods designed for recognizing some specific properties of protein structures often fail to consistently select good models from a model pool because of their limitations. Therefore, combining multiple complimentary quality assessment methods is useful for improving model ranking and consequently tertiary structure prediction. Here, we report the performance and analysis of our human tertiary structure predictor (MULTICOM) based on the massive integration of 14 diverse complementary quality assessment methods that was successfully benchmarked in the 11th Critical Assessment of Techniques of Protein Structure prediction (CASP11). The predictions of MULTICOM for 39 template-based domains were rigorously assessed by six scoring metrics covering global topology of Cα trace, local all-atom fitness, side chain quality, and physical reasonableness of the model. The results show that the massive integration of complementary, diverse single-model and multi-model quality assessment methods can effectively leverage the strength of single-model methods in distinguishing quality variation among similar good models and the advantage of multi-model quality assessment methods of identifying reasonable average-quality models. The overall excellent performance of the MULTICOM predictor demonstrates that integrating a large number of model quality assessment methods in conjunction with model clustering is a useful approach to improve the accuracy, diversity, and consequently robustness of template-based protein structure prediction. PMID:26369671

The influence of early embryo traits on human embryonic stem cell derivation efficiency.

PubMed

O'Leary, Thomas; Heindryckx, Björn; Lierman, Sylvie; Van der Jeught, Margot; Menten, Björn; Deforce, Dieter; Cornelissen, Ria; de Sousa Lopes, Susana Chuva; De Sutter, Petra

2011-05-01

Despite its prognostic value in in vitro fertilization, early embryo morphology is not reported on in the derivation of human embryonic stem cell (hESC) lines. Standard hESC derivation does rely on blastocyst development and its efficiency is highly correlated to inner cell mass (ICM) quality. Poor-quality embryos (PQEs) donated for hESC derivation may have a range of cleavage-stage abnormalities that are known to compromise further development. This study was implemented to determine whether specific PQEs traits influence the efficiency of good-quality ICMs to derive new hESC lines. We found that although the types of PQEs investigated were all able to make blastocysts with good-quality ICMs, the ICMs were unequal in their ability to derive hESCs. Good-quality ICMs from embryos with multiple poor-quality traits were unable to generate hESC lines, in contrast to good-quality ICMs from embryos with a single poor-quality trait. In addition, our data suggest a direct correlation between the number of ICM cells present in the blastocyst and its capacity to derive new hESC lines. This study is the first to demonstrate that ICM quality alone is an incomplete indicator of hESC derivation and that application of in vitro fertilization-based early embryo scoring can help predict hESC derivation efficiency. Experiments aiming to quantify, improve upon, or compare hESC derivation efficiency should thus take into consideration early embryo morphology scoring for the comparison of groups with equal developmental competence.

Quality management for the international transport of laboratory animals.

PubMed

Leary, Steven L

2008-01-01

Increased collaboration between investigators at different institutions has increased the number of laboratory animals being transported. The current system of laws and regulations governing animal shipments is inconsistent and government agencies often have areas of overlapping regulatory management. Furthermore, the lack of industry-wide shipping standards and good practices contributes to confusion among those responsible for shipment. One answer to these quality control issues would be the establishment of independent, industry-regulated 'good practices' for animal transport, similar to those used in laboratories for experimental design. These good practices could be based on the existing International Air Transport Association Live Animals Regulations, with contributions from representatives of the specialties involved. Additionally, quality control under the current system of patchwork regulations could be improved if each institution, both academic and commercial, would designate a single point of contact to follow each shipment from start to finish.

A Guide to the Librarian's Responsibility in Achieving Quality in Lighting and Ventilation.

ERIC Educational Resources Information Center

Mason, Ellsworth

1967-01-01

Quality, not intensity, is the keystone to good library lighting. The single most important problem in lighting is glare caused by extremely intense centers of light. Multiple interfiling of light rays is a factor required in library lighting. A fixture that diffuses light well is basic when light emerges from the fixture. It scatters widely,…

Single-phase Whole-body 64-MDCT Split-bolus Protocol for Pediatric Oncology: Diagnostic Efficacy and Dose Radiation.

PubMed

Scialpi, Michele; Schiavone, Raffaele; D'Andrea, Alfredo; Palumbo, Isabella; Magli, Michelle; Gravante, Sabrina; Falcone, Giuseppe; De Filippi, Claudio; Manganaro, Lucia; Palumbo, Barbara

2015-05-01

To evaluate the image quality and the diagnostic efficacy by single-phase whole-body 64-slice multidetector CT (MDCT) for pediatric oncology. Chest-abdomen-pelvis CT examinations with single-phase split-bolus technique were evaluated for T: detection and delineation of primary tumor (assessment of the extent of the lesion to neighboring tissues), N: regional lymph nodes and M: distant metastasis. Quality scores (5-point scale) were assessed by two radiologists on parenchymal and vascular enhancement. Accurate TNM staging in term of detection and delineation of primary tumor, regional lymph nodes and distant metastasis was obtained in all cases. On the image quality and severity artifact, the Kappa value for the interobserver agreement measure obtained from the analysis was 0.754, (p<0.001), characterizing a very good agreement between observers. Single-pass total body CT split-bolus technique reached the highest overall image quality and an accurate TNM staging in pediatric patients with cancer. Copyright© 2015 International Institute of Anticancer Research (Dr. John G. Delinassios), All rights reserved.

Massive integration of diverse protein quality assessment methods to improve template based modeling in CASP11.

PubMed

Cao, Renzhi; Bhattacharya, Debswapna; Adhikari, Badri; Li, Jilong; Cheng, Jianlin

2016-09-01

Model evaluation and selection is an important step and a big challenge in template-based protein structure prediction. Individual model quality assessment methods designed for recognizing some specific properties of protein structures often fail to consistently select good models from a model pool because of their limitations. Therefore, combining multiple complimentary quality assessment methods is useful for improving model ranking and consequently tertiary structure prediction. Here, we report the performance and analysis of our human tertiary structure predictor (MULTICOM) based on the massive integration of 14 diverse complementary quality assessment methods that was successfully benchmarked in the 11th Critical Assessment of Techniques of Protein Structure prediction (CASP11). The predictions of MULTICOM for 39 template-based domains were rigorously assessed by six scoring metrics covering global topology of Cα trace, local all-atom fitness, side chain quality, and physical reasonableness of the model. The results show that the massive integration of complementary, diverse single-model and multi-model quality assessment methods can effectively leverage the strength of single-model methods in distinguishing quality variation among similar good models and the advantage of multi-model quality assessment methods of identifying reasonable average-quality models. The overall excellent performance of the MULTICOM predictor demonstrates that integrating a large number of model quality assessment methods in conjunction with model clustering is a useful approach to improve the accuracy, diversity, and consequently robustness of template-based protein structure prediction. Proteins 2016; 84(Suppl 1):247-259. © 2015 Wiley Periodicals, Inc. © 2015 Wiley Periodicals, Inc.

Study of structural and optical properties of YAG and Nd:YAG single crystals

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kostić, S.; Lazarević, Z.Ž., E-mail: lzorica@yahoo.com; Radojević, V.

2015-03-15

Highlights: • Transparent YAG and pale pink Nd:YAG single crystals were produced by the Czochralski technique. • Growth mechanisms and shape of the liquid/solid interface and incorporation of Nd{sup 3+} were studied. • The structure of the crystals was investigated by X-ray diffraction, Raman and IR spectroscopy. • The 15 Raman and 17 IR modes were observed. • The obtained YAG and Nd:YAG single crystals were without core and of good optical quality. - Abstract: Yttrium aluminum garnet (YAG, Y{sub 3}Al{sub 5}O{sub 12}) and yttrium aluminum garnet doped with neodymium (Nd:YAG) single crystals were grown by the Czochralski technique. Themore » critical diameter and the critical rate of rotation were calculated. Suitable polishing and etching solutions were determined. As a result of our experiments, the transparent YAG and pale pink Nd:YAG single crystals were produced. The obtained crystals were studied by X-ray diffraction, Raman and IR spectroscopy. The crystal structure was confirmed by XRD. The 15 Raman and 17 IR modes were observed. The Raman and IR spectroscopy results are in accordance with X-ray diffraction analysis. The obtained YAG and Nd:YAG single crystals were without core and of good optical quality. The absence of a core was confirmed by viewing polished crystal slices. Also, it is important to emphasize that the obtained Nd:YAG single crystal has a concentration of 0.8 wt.% Nd{sup 3+} that is characteristic for laser materials.« less

A Combinatorial Auction among Versatile Experts and Amateurs

NASA Astrophysics Data System (ADS)

Ito, Takayuki; Yokoo, Makoto; Matsubara, Shigeo

Auctions have become an integral part of electronic commerce and a promising field for applying multi-agent technologies. Correctly judging the quality of auctioned goods is often difficult for amateurs, in particular, in Internet auctions. However, experts can correctly judge the quality of goods. In this situation, it is difficult to make experts tell the truth and attain an efficient allocation, since experts have a clear advantage over amateurs and they would not reveal their valuable information without some reward. In our previous work, we have succeeded in developing such auction protocols under the following two cases: (1) the case of a single-unit auction among experts and amateurs, and (2) the case of a combinatorial auction among single-skilled experts and amateurs. In this paper, we focus on versatile experts. Versatile experts have an interest in, and expert knowledge on the qualities of several goods. In the case of versatile experts, there would be several problems, e.g., free riding problems, if we simply extended the previous VCG-style auction protocol. Thus, in this paper, we employ PORF (price-oriented, rationing-free) protocol for designing our new protocol to realize a strategy-proof auction protocol for experts. In the protocol, the dominant strategy for experts is truth-telling. Also, for amateurs, truth-telling is the best response when two or more experts select the dominant strategy. Furthermore, the protocol is false-name-proof.

Single MoO3 nanoribbon waveguides: good building blocks as elements and interconnects for nanophotonic applications

NASA Astrophysics Data System (ADS)

Zhang, Li; Wu, Guoqing; Gu, Fuxing; Zeng, Heping

2015-11-01

Exploring new nanowaveguide materials and structures is of great scientific interest and technological significance for optical and photonic applications. In this work, high-quality single-crystal MoO3 nanoribbons (NRs) are synthesized and used for optical guiding. External light sources are efficiently launched into the single MoO3 NRs using silica fiber tapers. It is found that single MoO3 NRs are as good nanowaveguides with loss optical losses (typically less than 0.1 dB/μm) and broadband optical guiding in the visible/near-infrared region. Single MoO3 NRs have good Raman gains that are comparable to those of semiconductor nanowaveguides, but the second harmonic generation efficiencies are about 4 orders less than those of semiconductor nanowaveguides. And also no any third-order nonlinear optical effects are observed at high pump power. A hybrid Fabry-Pérot cavity containing an active CdSe nanowire and a passive MoO3 NR is also demonstrated, and the ability of coupling light from other active nanostructures and fluorescent liquid solutions has been further demonstrated. These optical properties make single MoO3 NRs attractive building blocks as elements and interconnects in miniaturized photonic circuitries and devices.

SMOQ: a tool for predicting the absolute residue-specific quality of a single protein model with support vector machines

PubMed Central

2014-01-01

Background It is important to predict the quality of a protein structural model before its native structure is known. The method that can predict the absolute local quality of individual residues in a single protein model is rare, yet particularly needed for using, ranking and refining protein models. Results We developed a machine learning tool (SMOQ) that can predict the distance deviation of each residue in a single protein model. SMOQ uses support vector machines (SVM) with protein sequence and structural features (i.e. basic feature set), including amino acid sequence, secondary structures, solvent accessibilities, and residue-residue contacts to make predictions. We also trained a SVM model with two new additional features (profiles and SOV scores) on 20 CASP8 targets and found that including them can only improve the performance when real deviations between native and model are higher than 5Å. The SMOQ tool finally released uses the basic feature set trained on 85 CASP8 targets. Moreover, SMOQ implemented a way to convert predicted local quality scores into a global quality score. SMOQ was tested on the 84 CASP9 single-domain targets. The average difference between the residue-specific distance deviation predicted by our method and the actual distance deviation on the test data is 2.637Å. The global quality prediction accuracy of the tool is comparable to other good tools on the same benchmark. Conclusion SMOQ is a useful tool for protein single model quality assessment. Its source code and executable are available at: http://sysbio.rnet.missouri.edu/multicom_toolbox/. PMID:24776231

SMOQ: a tool for predicting the absolute residue-specific quality of a single protein model with support vector machines.

PubMed

Cao, Renzhi; Wang, Zheng; Wang, Yiheng; Cheng, Jianlin

2014-04-28

It is important to predict the quality of a protein structural model before its native structure is known. The method that can predict the absolute local quality of individual residues in a single protein model is rare, yet particularly needed for using, ranking and refining protein models. We developed a machine learning tool (SMOQ) that can predict the distance deviation of each residue in a single protein model. SMOQ uses support vector machines (SVM) with protein sequence and structural features (i.e. basic feature set), including amino acid sequence, secondary structures, solvent accessibilities, and residue-residue contacts to make predictions. We also trained a SVM model with two new additional features (profiles and SOV scores) on 20 CASP8 targets and found that including them can only improve the performance when real deviations between native and model are higher than 5Å. The SMOQ tool finally released uses the basic feature set trained on 85 CASP8 targets. Moreover, SMOQ implemented a way to convert predicted local quality scores into a global quality score. SMOQ was tested on the 84 CASP9 single-domain targets. The average difference between the residue-specific distance deviation predicted by our method and the actual distance deviation on the test data is 2.637Å. The global quality prediction accuracy of the tool is comparable to other good tools on the same benchmark. SMOQ is a useful tool for protein single model quality assessment. Its source code and executable are available at: http://sysbio.rnet.missouri.edu/multicom_toolbox/.

[Simultaneous quantitative analysis of five alkaloids in Sophora flavescens by multi-components assay by single marker].

PubMed

Chen, Jing; Wang, Shu-Mei; Meng, Jiang; Sun, Fei; Liang, Sheng-Wang

2013-05-01

To establish a new method for quality evaluation and validate its feasibilities by simultaneous quantitative assay of five alkaloids in Sophora flavescens. The new quality evaluation method, quantitative analysis of multi-components by single marker (QAMS), was established and validated with S. flavescens. Five main alkaloids, oxymatrine, sophocarpine, matrine, oxysophocarpine and sophoridine, were selected as analytes to evaluate the quality of rhizome of S. flavescens, and the relative correction factor has good repeatibility. Their contents in 21 batches of samples, collected from different areas, were determined by both external standard method and QAMS. The method was evaluated by comparison of the quantitative results between external standard method and QAMS. No significant differences were found in the quantitative results of five alkaloids in 21 batches of S. flavescens determined by external standard method and QAMS. It is feasible and suitable to evaluate the quality of rhizome of S. flavescens by QAMS.

2.1 μm high-power laser diode beam combining(Conference Presentation)

NASA Astrophysics Data System (ADS)

Berrou, Antoine P. C.; Elder, Ian F.; Lamb, Robert A.; Esser, M. J. Daniel

2016-10-01

Laser power and brightness scaling, in "eye safe" atmospheric transmission windows, is driving laser system research and development. High power lasers with good beam quality, at wavelength around 2.1 µm, are necessary for optical countermeasure applications. For such applications, focusing on efficiency and compactness of the system is mandatory. In order to cope with these requirements, one must consider the use of laser diodes which emit directly in the desired spectral region. The challenge for these diodes is to maintain a good beam quality factor as the output power increases. 2 µm diodes with excellent beam quality in both axes are available with output powers of 100 mW. Therefore, in order to reach multi-watt of average output power, broad-area single emitters and beam combining becomes relevant. Different solutions have been implemented in the 1.9 to 2 µm wavelength range, one of which is to stack multiple emitter bars reaching more than one hundred watt, while another is a fibre coupled diode module. The beam propagation factor of these systems is too high for long atmospheric propagation applications. Here we describe preliminary results on non-coherent beam combining of 2.1 µm high power Fabry-Perot GaSb laser diodes supplied by Brolis Semiconductors Ltd. First we evaluated single mode diodes (143 mW) with good beam quality (M2 < 1.5 for slow axis and < 1.1 for fast axis). Then we characterized broad-area single emitter diodes (808 mW) with an electrical-to-optical efficiency of 19 %. The emitter width was 90 µm with a cavity length of 1.5 mm. In our experiments we found that the slow axis multimode output beam consisted of two symmetric lobes with a total full width at half maximum (FWHM) divergence angle of 25 degrees, corresponding to a calculated beam quality factor of M2 = 25. The fast axis divergence was specified to be 44 degrees, with an expected beam quality factor close to the diffraction limit, which informed our selection of collimation lenses used in the experiment. We evaluated two broadband (1.8 - 3 µm) AR coated Geltech aspheric lenses with focal lengths of 1.87 mm and 4 mm, with numerical apertures of 0.85 and 0.56, respectively, as an initial collimation lens, followed by an additional cylindrical lens of focal length 100 mm for fully collimating the slow axis. Using D-shaped gold-coated mirrors, multiple single emitter beams are stacked in the fast axis direction with the objective that the combined beam has a beam propagation factor in the stacking direction close to the beam propagation factor of the slow axis of a single emitter, e.g. M2 of 20 to 25 in both axes. We further found that the output beam of a single emitter is highly linearly polarized along the slow axis, making it feasible to implement polarization beam combining techniques to increase the beam power by a factor two while maintaining the same beam quality. Along with full beam characterization, a power scaling strategy towards a multi-watt output power beam combining laser system will be presented.

Development of Course Material in a Multi-Author Environment

ERIC Educational Resources Information Center

Schlotter, Michael

2009-01-01

Software for text processing and presentation design is becoming increasingly sophisticated. Nevertheless, it is difficult to find a good solution for collaborative writing of technical course material, allowing the creation of high quality lecture notes and presentation slides from a single source. This article presents a new editing framework…

Are Fad Diets Good for Education?

ERIC Educational Resources Information Center

Hunter, Bruce

1990-01-01

Argues that the goal of quality education for every child requires fundamental change in the process of teaching and learning. Criticizes the treatment of educational choice as the most important single education reform because it does not improve the learning environment of every child. Encourages avoidance of state entanglement in religion. (DK)

New CVD-based method for the growth of high-quality crystalline zinc oxide layers

NASA Astrophysics Data System (ADS)

Huber, Florian; Madel, Manfred; Reiser, Anton; Bauer, Sebastian; Thonke, Klaus

2016-07-01

High-quality zinc oxide (ZnO) layers were grown using a new chemical vapour deposition (CVD)-based low-cost growth method. The process is characterized by total simplicity, high growth rates, and cheap, less hazardous precursors. To produce elementary zinc vapour, methane (CH4) is used to reduce a ZnO powder. By re-oxidizing the zinc with pure oxygen, highly crystalline ZnO layers were grown on gallium nitride (GaN) layers and on sapphire substrates with an aluminum nitride (AlN) nucleation layer. Using simple CH4 as precursor has the big advantage of good controllability and the avoidance of highly toxic gases like nitrogen oxides. In photoluminescence (PL) measurements the samples show a strong near-band-edge emission and a sharp line width at 5 K. The good crystal quality has been confirmed in high resolution X-ray diffraction (HRXRD) measurements. This new growth method has great potential for industrial large-scale production of high-quality single crystal ZnO layers.

Effects of the internal friction and the solvent quality on the dynamics of a polymer chain closure.

PubMed

Yu, Wancheng; Luo, Kaifu

2015-03-28

Using 3D Langevin dynamics simulations, we investigate the effects of the internal friction and the solvent quality on the dynamics of a polymer chain closure. We show that the chain closure in good solvents is a purely diffusive process. By extrapolation to zero solvent viscosity, we find that the internal friction of a chain plays a non-ignorable role in the dynamics of the chain closure. When the solvent quality changes from good to poor, the mean closure time τc decreases by about 1 order of magnitude for the chain length 20 ≤ N ≤ 100. Furthermore, τc has a minimum as a function of the solvent quality. With increasing the chain length N, the minimum of τc occurs at a better solvent. Finally, the single exponential distributions of the closure time in poor solvents suggest that the negative excluded volume of segments does not alter the nearly Poisson statistical characteristics of the process of the chain closure.

Characterization of directionally solidified lead chloride

NASA Technical Reports Server (NTRS)

Singh, Narsingh Bahadur; Duval, W. M. B.; Rosenthal, B. N.

1988-01-01

A directionally solidified PbCl2 material was prepared and analyzed and subsequently used to grow single crystals. It was found that silicon, halogens, sulfur, magnesium, and phosphorus were the hardest impurities to remove by the single-pass directional freezing. Single crystals grown from the purified material displayed good scattering beam quality and showed no absorption peaks between 0.30 to 20 microns. Direct photographic observations of the solid-liquid interface at several G/V (denoting the temperature gradient and the translation velocity, respectively) ratio values showed that, as the G/V ratio decreased, the interface varied from a smooth convex surface to dendritic.

A Model for the Creation of Human-Generated Metadata within Communities

ERIC Educational Resources Information Center

Brasher, Andrew; McAndrew, Patrick

2005-01-01

This paper considers situations for which detailed metadata descriptions of learning resources are necessary, and focuses on human generation of such metadata. It describes a model which facilitates human production of good quality metadata by the development and use of structured vocabularies. Using examples, this model is applied to single and…

The ABC's of a Good Work Ethic

ERIC Educational Resources Information Center

Berry, R. Ladson; Glenn, Robert E.

2004-01-01

The work ethic incorporates more than just a single concept of high effort. It includes qualities like commitment, dependability, and willingness to learn. The work ethic also is closely associated with other values such as honesty, patience, and generosity. In this article, the authors emphasize the importance of hard work as well as the…

How Universities Can Increase Enrollment by Advertising Internships: The "Message" and the "Medium"

ERIC Educational Resources Information Center

Tucciarone, Kristy

2015-01-01

This study investigates how universities can increase enrollment by advertising internships to prospective students during the college search process. The primary reason students earn a college degree is to secure a good-quality career with earning potential. Internships--the single most important credential for recent graduates--are the key…

Pregnancy rates after artificial insemination with cooled stallion spermatozoa either with or without single layer centrifugation.

PubMed

Morrell, J M; Richter, J; Martinsson, G; Stuhtmann, G; Hoogewijs, M; Roels, K; Dalin, A-M

2014-11-01

A successful outcome after artificial insemination with cooled semen is dependent on many factors, the sperm quality of the ejaculate being one. Previous studies have shown that spermatozoa with good motility, normal morphology, and good chromatin integrity can be selected by means of colloid centrifugation, particularly single layer centrifugation (SLC) using species-specific colloids. The purpose of the present study was to conduct an insemination trial with spermatozoa from "normal" ejaculates, i.e., from stallions with no known fertility problem, to determine whether the improvements in sperm quality seen in SLC-selected sperm samples compared with uncentrifuged controls in laboratory tests are reflected in an increased pregnancy rate after artificial insemination. In a multicentre study, SLC-selected sperm samples and uncentrifuged controls from eight stallions were inseminated into approximately 10 mares per treatment per stallion. Ultrasound examination was carried out approximately 16 days after insemination to detect an embryonic vesicle. The pregnancy rates per cycle were 45% for controls and 69% for SLC-selected sperm samples, which is statistically significant (P < 0.0018). Thus, the improvement in sperm quality reported previously for SLC-selected sperm samples is associated with an increase in pregnancy rate, even for ejaculates from stallions with no known fertility problem. Copyright © 2014 Elsevier Inc. All rights reserved.

High-quality Mach-Zehnder interferometer based on a microcavity in single-multi-single mode fiber structure for refractive index sensing.

PubMed

Liu, Yi; Wu, Guoqiang; Gao, Renxi; Qu, Shiliang

2017-02-01

A fiber inline Mach-Zehnder interferometer (MZI) based on a microcavity with two symmetric openings in single-multi-single mode fiber (SMSF) structure is proposed. By using the finite difference beam propagation method (FD-BPM), the interference spectrum simulation result shows that the MZI can still have high-quality interference even if the microcavity deviates along the radial direction for 3 μm. Therefore, it allows a larger fabrication tolerance and tremendously decreases the fabrication difficulty. Then a microcavity with two symmetric openings in SMSF was fabricated by using femtosecond laser-induced water breakdown. The insertion loss of the microcavity immerged in water is only -8  dB, and the MZ interference peak contrast in the transmission spectrum reaches more than 30 dB. The MZI based on the microcavity in SMSF can be used as a practical liquid refractive index sensor as its high-quality interference spectrum, ultrahigh sensitivity (9756.75 nm/RIU), high refractive index resolution (2×10^-5  RIU), good linearity (99.93%), and low-temperature crosstalk (0.04 nm/°C).

Oral availability of bilastine.

PubMed

Sádaba, B; Gómez-Guiu, A; Azanza, J R; Ortega, I; Valiente, R

2013-05-01

Bilastine (Bilaxten™) is a novel non-sedating H1 receptor antagonist (antihistamine) developed in the dosage form of oral tablets and indicated for the treatment of allergic rhinitis (seasonal and perennial) and urticaria. Several clinical trials have been performed in order to determine the efficacy and safety of bilastine. The aim of this trial was to study the absolute oral bioavailability of bilastine in humans. Twelve male and female adults were recruited into a single centre for a randomized, single-dose, open-label, controlled two-arm crossover study with a minimum 14-day washout period between the two single doses. Two single doses of bilastine were administered: a 20-mg oral tablet and a 10-mg intravenous formulation. Blood and urine samples were collected between 0 and 72 h post each administration. The clinical trial was carried out under quality assurance and quality control systems with standard operating procedures to ensure that the study was conducted and data generated in compliance with the protocol, Good Clinical Practice standards, International Conference on Harmonisation and other applicable regulations. Oral bioavailability of bilastine was 60.67 % with a 90 % parametric confidence interval of 53.79-67.56. The maximum bilastine concentration was measured 1.31 h after oral administration. Pharmacokinetic parameters were similar to those observed in previous studies. Tolerance to treatment was good, with no adverse events related to study medication. The absorption of bilastine after oral administration to healthy subjects was rapid. The absolute oral bioavailability was moderate.

Neurodevelopmental Outcome and Health-related Quality of Life in Children With Single-ventricle Heart Disease Before Fontan Procedure.

PubMed

Reich, Bettina; Heye, Kristina; Tuura, Ruth; Beck, Ingrid; Wetterling, Kristina; Hahn, Andreas; Hofmann, Karoline; Schranz, Dietmar; Akintürk, Hakan; Latal, Beatrice; Knirsch, Walter

2017-12-05

Neurodevelopmental impairment and impaired quality of life constitute a major source of morbidity among children with complex congenital heart disease, in particular for single-ventricle (SV) morphologies. Risk factors and quality of life determining clinical and neurodevelopmental outcome at 2 years of age are examined. In a 2-center cohort study, 48 patients with SV morphology (26 hypoplastic left heart syndrome and 22 other types of univentricular heart defect) have been examined before Fontan procedure between 2010 and 2015. Patients were assessed with the Bayley Scales of Infant and Toddler Development, Third Version (Bayley-III), and the Preschool Children Quality of Life (TAPQOL) questionnaire. A total of 44 patients underwent hybrid procedure (n = 25), Norwood procedure (n = 7), or shunt or banding procedure (n = 12) as first surgery before subsequent bidirectional cavopulmonary anastomosis (n = 48). Median cognitive, language, and motor composite scores on the Bayley-III were 100 (range 65-120), 97 (68-124), and 97 (55-124), respectively. The language composite score was significantly below the norm (P = 0.025). Risk factors for poorer neurodevelopmental outcome were prolonged mechanical ventilation, longer days of hospital stay, and more reinterventions (all P < 0.05). Parents reported a good quality of life for their children. Children undergoing Fontan procedure show a favorable development and good quality of life. More complicated postoperative course and reinterventions constitute risk factors for impaired neurodevelopment. Improving postoperative management and implementing routine follow-up assessments aremeasures to further improve the neurodevelopmental outcome of this high-risk patient population. Copyright © 2017 Elsevier Inc. All rights reserved.

A variable rate speech compressor for mobile applications

NASA Technical Reports Server (NTRS)

Yeldener, S.; Kondoz, A. M.; Evans, B. G.

1990-01-01

One of the most promising speech coder at the bit rate of 9.6 to 4.8 kbits/s is CELP. Code Excited Linear Prediction (CELP) has been dominating 9.6 to 4.8 kbits/s region during the past 3 to 4 years. Its set back however, is its expensive implementation. As an alternative to CELP, the Base-Band CELP (CELP-BB) was developed which produced good quality speech comparable to CELP and a single chip implementable complexity as reported previously. Its robustness was also improved to tolerate errors up to 1.0 pct. and maintain intelligibility up to 5.0 pct. and more. Although, CELP-BB produces good quality speech at around 4.8 kbits/s, it has a fundamental problem when updating the pitch filter memory. A sub-optimal solution is proposed for this problem. Below 4.8 kbits/s, however, CELP-BB suffers from noticeable quantization noise as a result of the large vector dimensions used. Efficient representation of speech below 4.8 kbits/s is reported by introducing Sinusoidal Transform Coding (STC) to represent the LPC excitation which is called Sine Wave Excited LPC (SWELP). In this case, natural sounding good quality synthetic speech is obtained at around 2.4 kbits/s.

Characteristics of epitaxial garnets grown by CVD using single metal alloy sources. [Chemical Vapor Deposition

NASA Technical Reports Server (NTRS)

Besser, P. J.; Hamilton, T. N.; Mee, J. E.; Stermer, R. L.

1974-01-01

Single metal alloys have been explored as the cation source in the chemical vapor deposition (CVD) of iron garnets. Growth of good quality single crystal garnet films containing as many as five different cations has been achieved over a wide range of deposition conditions. The relationship of film composition to alloy compositions and deposition conditions has been determined for several materials. By proper choice of the alloy composition and the deposition conditions, uncrazed deposits were grown on (111) gadolinium gallium garnet (GGG) substrates. Data on physical, magnetic and optical properties of representative films is presented and discussed.

Iron single crystal growth from a lithium-rich melt

NASA Astrophysics Data System (ADS)

Fix, M.; Schumann, H.; Jantz, S. G.; Breitner, F. A.; Leineweber, A.; Jesche, A.

2018-03-01

α -Fe single crystals of rhombic dodecahedral habit were grown from a Li84N12Fe∼3 melt. Crystals of several millimeter along a side form at temperatures around T ≈ 800 ° C. Upon further cooling the growth competes with the formation of Fe-doped Li3N. The b.c.c. structure and good sample quality of α -Fe single crystals were confirmed by X-ray and electron diffraction as well as magnetization measurements and chemical analysis. A nitrogen concentration of 90 ppm was detected by means of carrier gas hot extraction. Scanning electron microscopy did not reveal any sign of iron nitride precipitates.

The Effects of Storm Runoff on Water Quality and the Coping Strategy of a Deep Canyon-Shaped Source Water Reservoir in China

PubMed Central

Ma, Weixing; Huang, Tinglin; Li, Xuan; Zhou, Zizhen; Li, Yang; Zeng, Kang

2015-01-01

Storm runoff events in the flooding season affect the water quality of reservoirs and increase risks to the water supply, but coping strategies have seldom been reported. The phenomenon of turbid current intrusion resulting in water turbidity and anoxic conditions reappearing after storm runoff, resulting in the deterioration of water quality, was observed in the flooding season in the deep canyon-shaped Heihe Reservoir. The objective of this work was to elucidate the effects of storm runoff on the Heihe Reservoir water quality and find a coping strategy. In this study, an intensive sampling campaign measuring water temperature, dissolved oxygen, turbidity, nutrients, and metals were conducted in the reservoir over a period of two years, and the water-lifting aerators were improved to achieve single aeration and a full layer of mixing and oxygenation functions using different volumes of gas. The operation of the improved water-lifting aerators mixed the reservoir three months ahead of the natural mixing time, and good water quality was maintained during the induced mixing period, thereby extending the good water quality period. The results can provide an effective coping strategy to improve the water quality of a source water reservoir and ensure the safety of drinking water. PMID:26184258

Exploring in integrated quality evaluation of Chinese herbal medicines: the integrated quality index (IQI) for aconite.

PubMed

Zhang, Ding-kun; Wang, Jia-bo; Yang, Ming; Peng, Cheng; Xiao, Xiao-he

2015-07-01

Good medicinal herbs, good drugs. Good evaluation method and indices are the prerequisite of good medicinal herbs. However, there exist numerous indices for quality evaluation and control in Chinese medicinal materials. However, most of these indices are non-interrelated each other, as well as having little relationship with efficiency and safety. The results of different evaluatior methods may not be consistent, even contradictory. Considering the complex material properties of Chinese medicinal materials, single method and index is difficult to objectively and comprehensively reflect the quality. Therefore, it is essential to explore the integrated evaluation methods. In this paper, oriented by the integrated evaluation strategies for traditional Chinese medicine quality, a new method called integrated quality index (IQI) by the integration of empirical evaluation, chemical evaluation, and biological evaluation was proposed. In addition, a study case of hypertoxic herb Aconitum carmichaelii Debx. was provided to explain this method in detail. The results suggested that in the view of specifications, the average weight of Jiangyou aconite was the greatest, followed by Weishan aconite, Butuo aconite, Hanzhong aconite, and Anxian aconite; from the point of chemical components, Jiangyou aconite had the characteristic with strong efficacy and weak toxicity, next was Hanzhong aconite, Butuo aconite, Weishan aconite, and Anxian aconite; taking toxicity price as the index, Hanzhong aconite and Jiangyou aconite have the lower toxicity, while Butuo aconite, Weishan aconite, and Anxian aconite have the relatively higher one. After the normalization and integration of evaluation results, we calculated the IQI value of Jiangyou aconite, Hanzhong aconite, Butuo aconite, Weishan aconite, and Anxian aconite were 0.842 +/- 0.091, 0.597 +/- 0.047, 0.442 +/- 0.033, 0.454 +/- 0.038, 0.170 +/- 0.021, respectively. The quality of Jiangyou aconite is significantly better than the others (P < 0.05) followed by Hanzhong aconite, which is consistent with the traditional understanding of genuineness. It can be concluded that IQI achieves the integrated control and evaluation for the quality of Chinese medicinal materials, and it is an exploration for building the good medicinal herbs standards. In addition, IQI provides technical supports for the geoherbalism evaluation, selective breeding, the development of precision decoction pieces, high quality and favourable price in market circulation, and rational drug use.

Change of sleep quality from pre- to 3 years post-solid organ transplantation: The Swiss Transplant Cohort Study

PubMed Central

Denhaerynck, Kris; Huynh-Do, Uyen; Binet, Isabelle; Hadaya, Karine; De Geest, Sabina

2017-01-01

Background Poor sleep quality (SQ) is common after solid organ transplantation; however, very little is known about its natural history. We assessed the changes in SQ from pre- to 3 years post-transplant in adult heart, kidney, liver and lung recipients included in the prospective nation-wide Swiss Transplant Cohort Study. We explored associations with selected variables in patients suffering persistent poor SQ compared to those with good or variable SQ. Methods Adult single organ transplant recipients enrolled in the Swiss Transplant Cohort Study with pre-transplant and at least 3 post-transplant SQ assessment data were included. SQ was self-reported pre-transplant (at listing), then at 6, 12, 24 and 36 months post-transplant. A single SQ item was used to identify poor (0–5) and good sleepers (6–10). Between organ groups, SQ was compared via logistic regression analysis with generalized estimating equations. Within the group reporting persistently poor SQ, we used logistic regression or Kaplan-Meier analysis as appropriate to check for differences in global quality of life and survival. Results In a sample of 1173 transplant patients (age: 52.1±13.2 years; 65% males; 66% kidney, 17% liver, 10% lung, 7% heart) transplanted between 2008 and 2012, pre- transplant poor SQ was highest in liver (50%) and heart (49%) recipients. Overall, poor SQ decreased significantly from pre-transplant (38%) to 24 months post-transplant (26%) and remained stable at 3 years (29%). Patients reporting persistently poor SQ had significantly more depressive symptomatology and lower global quality of life. Conclusion Because self-reported poor SQ is related to poorer global quality of life, these results emphasize the need for further studies to find suitable treatment options for poor SQ in transplant recipients. PMID:29020112

Blastocyst Development in a Single Medium Compared to Sequential Media: A Prospective Study With Sibling Oocytes.

PubMed

Sfontouris, Ioannis A; Kolibianakis, Efstratios M; Lainas, George T; Petsas, George K; Tarlatzis, Basil C; Lainas, Trifon G

2017-09-01

The aim of the present study was to compare blastocyst formation rates after embryo culture in a single medium (Global) as compared to sequential media (ISM1/BlastAssist). In this prospective trial with sibling oocytes, 542 metaphase II (ΜΙΙ) oocytes from 31 women were randomly and equally divided to be fertilized and cultured to the blastocyst stage in either sequential media (ISM1/BlastAssist; n = 271 MII oocytes) or a single medium (Global; n = 271 MII oocytes). In both groups, embryos were cultured in an interrupted fashion with media changes on day 3. Embryo transfer was performed on day 5. Blastocyst formation rates on day 5 (61.7% ± 19.9% vs 37.0% ± 25.5%, P < .001) were significantly higher following culture in Global as compared to ISM1/BlastAssist, respectively. Fertilization rates, cleavage rates, and percentage of good quality embryos on day 3 were similar between Global and ISM1/BlastAssist, respectively. The percentages of good quality blastocysts (63.0% ± 24.8% vs 32.1% ± 37.2%, P < .001), blastocysts selected for transfer (27.8% ± 19.2% vs 11.1% ± 14.4%, P = .005), and utilization rates (62.5% ± 24.8% vs 39.0% ± 25.2%, P < .001) were significantly higher in Global as compared to ISM1/BlastAssist, respectively. In conclusion, culture in Global was associated with higher blastocyst formation rates compared to ISM1/BlastAssist, suggesting that the single medium may provide better support to the developing embryo.

A systematic review of palliative bone radiotherapy based on pain relief and retreatment rates.

PubMed

Pin, Yvan; Paix, Adrien; Le Fèvre, Clara; Antoni, Delphine; Blondet, Cyrille; Noël, Georges

2018-03-01

Palliative radiotherapy has been shown to have effects on Quality of Life during painful bone metastasis. This review aimed to determine equivalence in pain relief (PR) and retreatment rate (RR) using both single and multi-fraction irradiations, based on evaluation of the trial's quality. We performed a systematic review since ICRU 50 Report (1993) to June 2017, then evaluated trials for reproducibility and good methodology criteria. We found five studies that were reproducible in both dose and volume prescription. One study used three-dimensional (3D) treatment planning. Equivalence between single and multi-fraction schedules was demonstrated for PR after 3 months, but a 2-3 time RR appeared after single-fraction schedules, notably in the first year after treatment (primarily during the first four months). Reserving long course therapy for well-preserved patients would allow for better long-term efficacy with lower RR, while altered patients would suffer less from single-fraction treatments. It appears that life expectancy might not be used as a criterion for this choice. Copyright © 2018 Elsevier B.V. All rights reserved.

Local extinction of dragonfly and damselfly populations in low- and high-quality habitat patches.

PubMed

Suhonen, Jukka; Hilli-Lukkarinen, Milla; Korkeamäki, Esa; Kuitunen, Markku; Kullas, Johanna; Penttinen, Jouni; Salmela, Jukka

2010-08-01

Understanding the risk of extinction of a single population is an important problem in both theoretical and applied ecology. Local extinction risk depends on several factors, including population size, demographic or environmental stochasticity, natural catastrophe, or the loss of genetic diversity. The probability of local extinction may also be higher in low-quality sink habitats than in high-quality source habitats. We tested this hypothesis by comparing local extinction rates of 15 species of Odonata (dragonflies and damselflies) between 1930-1975 and 1995-2003 in central Finland. Local extinction rates were higher in low-quality than in high-quality habitats. Nevertheless, for the three most common species there were no differences in extinction rates between low- and high-quality habitats. Our results suggest that a good understanding of habitat quality is crucial for the conservation of species in heterogeneous landscapes.

An optical investigation of nano-crystalline CaF2 particles doped with Nd3+ ions

NASA Astrophysics Data System (ADS)

O'Dwyer, C.; James, H. J.; Cheu, B.; Jaque, F.; Han, T. P. J.

2017-10-01

Good crystalline quality CaF2 sub-micron size particles doped with neodymium ions have been produced by the co-precipitation process and their crystallinity have been further improved by thermal treatment at 500 °C. Core and surface related luminescence defect centres have been identified and the effects of Y3+ and Yb3+ codopants are also investigated. Core defects centres are associated with single-ion and multi-ion defect centres as observed in bulk single crystal whereas the origin of the surface or near surface defect, A‧, centre has been ascertained to be derived from a single-ion centre most probably charge compensated by a hydroxyl group.

A survey of quality measures for gray-scale image compression

NASA Technical Reports Server (NTRS)

Eskicioglu, Ahmet M.; Fisher, Paul S.

1993-01-01

Although a variety of techniques are available today for gray-scale image compression, a complete evaluation of these techniques cannot be made as there is no single reliable objective criterion for measuring the error in compressed images. The traditional subjective criteria are burdensome, and usually inaccurate or inconsistent. On the other hand, being the most common objective criterion, the mean square error (MSE) does not have a good correlation with the viewer's response. It is now understood that in order to have a reliable quality measure, a representative model of the complex human visual system is required. In this paper, we survey and give a classification of the criteria for the evaluation of monochrome image quality.

Helical Fiber Amplifier

DOEpatents

Koplow, Jeffrey P.; Kliner, Dahy; Goldberg, Lew

2002-12-17

A multi-mode gain fiber is provided which affords substantial improvements in the maximum pulse energy, peak power handling capabilities, average output power, and/or pumping efficiency of fiber amplifier and laser sources while maintaining good beam quality (comparable to that of a conventional single-mode fiber source). These benefits are realized by coiling the multimode gain fiber to induce significant bend loss for all but the lowest-order mode(s).

A Good Beginning Makes a Good Market: The Effect of Different Market Opening Structures on Market Quality

PubMed Central

Hinterleitner, Gernot; Leopold-Wildburger, Ulrike

2015-01-01

This paper deals with the market structure at the opening of the trading day and its influence on subsequent trading. We compare a single continuous double auction and two complement markets with different call auction designs as opening mechanisms in a unified experimental framework. The call auctions differ with respect to their levels of transparency. We find that a call auction not only improves market efficiency and liquidity at the beginning of the trading day when compared to the stand-alone continuous double auction, but also causes positive spillover effects on subsequent trading. Concerning the design of the opening call auction, we find no significant differences between the transparent and nontransparent specification with respect to opening prices and liquidity. In the course of subsequent continuous trading, however, market quality is slightly higher after a nontransparent call auction. PMID:26351653

The demise of primary care: a diatribe from the trenches.

PubMed

Norenberg, David D

2009-05-19

Medical school graduates are avoiding primary care. The very aspects that once attracted students have been subverted. The breadth of practice that was once appealing has become the breadth of heavy-handed scrutiny, as politicians and business leaders have demanded quality--simplistically defined as dogmatic adherence to a standard. Individualized clinical judgment has been devalued; thinking has been replaced by algorithms. Practice guidelines have been usurped by pay-for-performance police, on patrol for deviations--not understanding that knowing and allowing for exceptions is the heart and soul of primary care. The coercive surveillance of "Quality Improvement" has become oppressive, making single organ-system specialties increasingly attractive (or at least more tolerable). Generalists are spending so much time proving they are good doctors, they don't have time to be good doctors. A remedy is suggested: a pilot project of volunteer salaried internists (more trusted, less audited) commissioned to our expandable national health care program, Medicare.

A Good Beginning Makes a Good Market: The Effect of Different Market Opening Structures on Market Quality.

PubMed

Hinterleitner, Gernot; Leopold-Wildburger, Ulrike; Mestel, Roland; Palan, Stefan

2015-01-01

This paper deals with the market structure at the opening of the trading day and its influence on subsequent trading. We compare a single continuous double auction and two complement markets with different call auction designs as opening mechanisms in a unified experimental framework. The call auctions differ with respect to their levels of transparency. We find that a call auction not only improves market efficiency and liquidity at the beginning of the trading day when compared to the stand-alone continuous double auction, but also causes positive spillover effects on subsequent trading. Concerning the design of the opening call auction, we find no significant differences between the transparent and nontransparent specification with respect to opening prices and liquidity. In the course of subsequent continuous trading, however, market quality is slightly higher after a nontransparent call auction.

Single-crystalline graphene radio-frequency nanoswitches

NASA Astrophysics Data System (ADS)

Li, Peng; Cui, Tianhong

2015-07-01

Growth of monolayer single-crystalline graphene (SCG) using the low-pressure chemical vapor deposition method is reported. Graphene’s superb quality and single-crystalline nature were characterized and verified by Raman microscopy, atomic force microscopy, and carrier mobility measurement. Radio-frequency (RF) nanoelectromechanical switches based on coplanar waveguide double-clamped SCG membrane were achieved, and the superb properties of SCG enable the switches to operate at a pull-in voltage as low as 1 V, with switch time in the nanosecond regime. Owing to their single-crystalline nature, the switches’ lifetime (>5000 times) is much longer than that of polycrystalline graphene ones reported. The RF devices exhibit good isolation (-30 dB at 40 GHz (Ka band)), which can be further improved by SCG’s conductivity variation due to actuation voltage.

Mechanisms and kinetics of cellulose fermentation for protein production

NASA Technical Reports Server (NTRS)

Dunlap, C. A.

1971-01-01

The development of a process (and ancillary processing and analytical techniques) to produce bacterial single-cell protein of good nutritional quality from waste cellulose is discussed. A fermentation pilot plant and laboratory were developed and have been in operation for about two years. Single-cell protein (SCP) can be produced from sugarcane bagasse--a typical agricultural cellulosic waste. The optimization and understanding of this process and its controlling variables are examined. Both batch and continuous fermentation runs have been made under controlled conditions in the 535 liter pilot plant vessel and in the laboratory 14-liter fermenters.

Using dental care resources optimally: quality-efficiency trade-offs in a competitive private market.

PubMed

Prasad, Banuru Muralidhara; Varatharajan, D

2011-01-01

Modern lifestyle changes led to increased dental care needs in India. Consequently, there has been a sharp rise in dentist numbers. Karnataka state alone produces 2,500 dentists annually, who are engaged in the non-government sector owing to inadequate public sector opportunities. This article aims to assess Karnataka private dental clinic quality and efficiency. Dentists were interviewed using a close-ended, structured interview schedule and their clinics were assessed using a checklist adopted from guidelines for providing machinery and equipment under the National Oral Health Care Programme (NOHCP). Dental "hotel" and clinical quality were scored based on this checklist. Clinical quality was "excellent" in 12 per cent of clinics and poor in 49 per cent. Clinics with better infrastructure charged higher price (p < 0.05). Multi-chair clinics charging fixed rates were high (81 per cent). According to 59.5 per cent of dentists, competition did not improve quality while 27 per cent felt that competition increased price, not quality. About 30.9 per cent of the poor quality clinics, 41 per cent average quality clinics and 26 per cent good quality clinics were technically efficient. The multi chair clinics offered better quality at higher prices and single chair clinics provided poorer quality at lower prices. In other words, they had a sub-optimal price-quality mix. Therefore, there is a need to regulate price and quality in all clinics to arrive at an optimal price-quality mix so that clients are not overburdened financially even while receiving good quality dental care. The article advocates that resources are used optimally as a way to achieve value for money and to achieve break-even points thereby providing quality care in a competitive market. Factors that influence dental practitioner behaviour are evaluated.

A diagnostic model for studying daytime urban air quality trends

NASA Technical Reports Server (NTRS)

Brewer, D. A.; Remsberg, E. E.; Woodbury, G. E.

1981-01-01

A single cell Eulerian photochemical air quality simulation model was developed and validated for selected days of the 1976 St. Louis Regional Air Pollution Study (RAPS) data sets; parameterizations of variables in the model and validation studies using the model are discussed. Good agreement was obtained between measured and modeled concentrations of NO, CO, and NO2 for all days simulated. The maximum concentration of O3 was also predicted well. Predicted species concentrations were relatively insensitive to small variations in CO and NOx emissions and to the concentrations of species which are entrained as the mixed layer rises.

Sperm Parameters: Paradigmatic Index of Good Health and Longevity

PubMed Central

Omu, Alexander E.

2013-01-01

Since the discovery of spermatozoon by Anton van Leeuwenhoek in 1677, there has been an ever increasing understanding of its role in reproduction. Many factors adversely affect sperm quality, including varicocele, accessory gland infection, immunological factors, congenital abnormalities, and iatrogenic systemic and endocrine causes, such as diabetes mellitus, obesity, metabolic syndrome, and smoking. The mechanisms responsible for the association between poor sperm parameters and ill health may include oxidative stress, low-grade inflammation, low testosterone, and low sex-hormone-binding globulin. Oxidative stress in the testicular microenvironment may result in decreased spermatogenesis and sperm DNA damage, loss of sperm motility, and abnormal sperm morphology. Low testosterone caused by advanced age, visceral obesity, and inflammation is associated with the development of cardiovascular disease. Hence, semen analysis has an important role in the routine evaluation of idiopathic male infertility, usually manifested as low sperm counts, impaired sperm motility, or absence of sperm, and remains the most common single diagnostic tool. Several studies have shown an inverse relationship between semen quality and medical disorders. This review elucidates the effect of medical disorders and social habits on sperm quality, the mechanisms that are involved in the impairment of sperm quality, and whether or not sperm quality can be used as an index of good health and longevity in a man. PMID:24051979

Operation of low-noise single-gap RPC modules exposed to ionisation rates up to 1 kHz /cm2

NASA Astrophysics Data System (ADS)

Ćwiok, M.; Dominik, W.; Górski, M.; Królikowski, J.

2004-11-01

Two single gap medium-size RPC modules, made of bakelite plates of very good mechanical quality of the surface and having initial volume resistivity of 1 ×1010 Ω cm, were tested in the Gamma Irradiation Facility at CERN at ionisation rates up to 1 kHz /cm2. The internal surfaces facing the gas volume of one RPC module were cladded with a thin layer of linseed oil varnish for comparison of oiled and non-oiled RPC operation. The results refer to the gas mixture of C2H2F4/isobutane (97:3) with SF6 addition below 1%. The single gap modules exhibited full detection efficiency plateau for the high voltage range of about 1 kV at full intensity of gamma rays. Good timing characteristics allowed to reach 95% efficiency at fully opened irradiation source with time window of 20 ns. The intrinsic noise rate for a non-oiled and an oiled RPC gap was, respectively, below 5 and 1 Hz /cm2 at full efficiency over 1 kV voltage range.

Single-kernel analysis of fumonisins and other fungal metabolites in maize from South African subsistence farmers.

PubMed

Mogensen, J M; Sørensen, S M; Sulyok, M; van der Westhuizen, L; Shephard, G S; Frisvad, J C; Thrane, U; Krska, R; Nielsen, K F

2011-12-01

Fumonisins are important Fusarium mycotoxins mainly found in maize and derived products. This study analysed maize from five subsistence farmers in the former Transkei region of South Africa. Farmers had sorted kernels into good and mouldy quality. A total of 400 kernels from 10 batches were analysed; of these 100 were visually characterised as uninfected and 300 as infected. Of the 400 kernels, 15% were contaminated with 1.84-1428 mg kg(-1) fumonisins, and 4% (n=15) had a fumonisin content above 100 mg kg(-1). None of the visually uninfected maize had detectable amounts of fumonisins. The total fumonisin concentration was 0.28-1.1 mg kg(-1) for good-quality batches and 0.03-6.2 mg kg(-1) for mouldy-quality batches. The high fumonisin content in the batches was apparently caused by a small number (4%) of highly contaminated kernels, and removal of these reduced the average fumonisin content by 71%. Of the 400 kernels, 80 were screened for 186 microbial metabolites by liquid chromatography-tandem mass spectrometry, detecting 17 other fungal metabolites, including fusaric acid, equisetin, fusaproliferin, beauvericin, cyclosporins, agroclavine, chanoclavine, rugulosin and emodin. Fusaric acid in samples without fumonisins indicated the possibility of using non-toxinogenic Fusaria as biocontrol agents to reduce fumonisin exposure, as done for Aspergillus flavus. This is the first report of mycotoxin profiling in single naturally infected maize kernels. © 2011 Taylor & Francis

Fluvial reservoir architecture in the Malay Basin: Opportunities and challenges

DOE Office of Scientific and Technical Information (OSTI.GOV)

Elias, M.R.; Dharmarajan, K.

1994-07-01

Miocene fluvial sandstones are significant hydrocarbon-bearing reservoirs in the Malay Basin. These include high energy, braided stream deposits of group K, associated with late development of extensional half grabens and relatively lower energy, meandering, and anastomosing channel deposits of group I formed during the subsequent basin sag phase. Group K reservoirs are typically massive, commonly tens of meters thick, and cover an extensive part of the Malay Basin. These reservoirs have good porosity and permeability at shallow burial depths. However, reservoir quality deteriorates rapidly with increasing depth. Lateral and vertical reservoir continuity is generally good within a field, commonly formingmore » a single system. Good water drive enhances recovery. Seismic modeling to determine fluid type and the extent of interfluvial shales is possible due to reservoir homogeneity.« less

Sol–gel preparation of well-adhered films and long range ordered inverse opal films of BaTiO{sub 3} and Bi{sub 2}Ti{sub 2}O{sub 7}

DOE Office of Scientific and Technical Information (OSTI.GOV)

Al-Arjan, Wafa S.; King Faisal University, PO Box 380, Al Hofuf; Algaradah, Mohammed M.F.

Highlights: • Highly adaptable sols are presented for processing of the electroceramic materials BaTiO{sub 3} and Bi{sub 2}Ti{sub 2}O{sub 7}. • High quality thin films are produced by dip coating with good phase control. • Infiltration of cross-linked polystyrene templates led to high quality inverse opals. - Abstract: Barium and bismuth titanate thin films and well-ordered inverse opal films are produced by dip coating from sols containing titanium alkoxides with acetic acid, acetylacetone, methoxyethanol and water. The inverse opal preparations used crosslinked polystyrene opal templates. Heat treatment in air produced tetragonal BaTiO{sub 3} or mixtures of the hexagonal and tetragonalmore » phases, or phase pure Bi{sub 2}Ti{sub 2}O{sub 7}. Good quality films were obtained with a thickness of 5 μm from a single dipping, and the thickness could be increased by dipping multiple times. Inverse opals were well ordered and exhibited opalescence and photonic stop band effects.« less

External quality assessment for EGFR mutations in Italy: improvements in performances over the time.

PubMed

Normanno, Nicola; Fenizia, Francesca; Castiglione, Francesca; Barberis, Massimo; Taddei, Gian Luigi; Truini, Mauro; De Rosa, Gaetano; Pinto, Carmine; Marchetti, Antonio

2017-01-01

External quality assessment (EQA) schemes are essential procedures to assess the quality level of laboratories performing molecular testing of the epidermal growth factor receptor ( EGFR ) gene in non-small cell lung cancer. The Italian Association of Medical Oncology (AIOM) and the Italian Society of Pathology (SIAPEC-IAP) organise EGFR EQA programmes to ensure that the Italian laboratories achieve the quality standard levels required. Comparing the 2011, 2013 and 2015 EGFR EQA schemes, it was possible to observe improvements in the methodologies used and the outcomes. The use of direct sequencing was reduced from 78.7% in 2011 to only 14.1% in 2015, whereas the use of pyrosequencing and real-time PCR increased. The number of rounds in which centres using direct sequencing failed was significantly higher than the number of rounds that failed using other methods, both when analysing each single scheme and when combining the three EQAs together. In 2011 and 2013, about 29% of the participants failed the first phase of the programmes, compared with the 13% of centres failing in 2015, suggesting that the switch to more sensitive and robust methods could allow to increase the percentage of good performers. Although the molecular analyses are performed with good quality in Italy, the continuous education carried out by AIOM and SIAPEC-IAP remains a fundamental tool to maintain this quality level.

External quality assessment for EGFR mutations in Italy: improvements in performances over the time

PubMed Central

Normanno, Nicola; Fenizia, Francesca; Castiglione, Francesca; Barberis, Massimo; Taddei, Gian Luigi; Truini, Mauro; De Rosa, Gaetano; Pinto, Carmine; Marchetti, Antonio

2017-01-01

External quality assessment (EQA) schemes are essential procedures to assess the quality level of laboratories performing molecular testing of the epidermal growth factor receptor (EGFR) gene in non-small cell lung cancer. The Italian Association of Medical Oncology (AIOM) and the Italian Society of Pathology (SIAPEC-IAP) organise EGFR EQA programmes to ensure that the Italian laboratories achieve the quality standard levels required. Comparing the 2011, 2013 and 2015 EGFR EQA schemes, it was possible to observe improvements in the methodologies used and the outcomes. The use of direct sequencing was reduced from 78.7% in 2011 to only 14.1% in 2015, whereas the use of pyrosequencing and real-time PCR increased. The number of rounds in which centres using direct sequencing failed was significantly higher than the number of rounds that failed using other methods, both when analysing each single scheme and when combining the three EQAs together. In 2011 and 2013, about 29% of the participants failed the first phase of the programmes, compared with the 13% of centres failing in 2015, suggesting that the switch to more sensitive and robust methods could allow to increase the percentage of good performers. Although the molecular analyses are performed with good quality in Italy, the continuous education carried out by AIOM and SIAPEC-IAP remains a fundamental tool to maintain this quality level. PMID:29181190

Image Quality of Cardiac Magnetic Resonance Imaging in Patients With an Implantable Cardioverter Defibrillator System Designed for the Magnetic Resonance Imaging Environment.

PubMed

Schwitter, Juerg; Gold, Michael R; Al Fagih, Ahmed; Lee, Sung; Peterson, Michael; Ciuffo, Allen; Zhang, Yan; Kristiansen, Nina; Kanal, Emanuel; Sommer, Torsten

2016-05-01

Recently, magnetic resonance (MR)-conditional implantable cardioverter defibrillator (ICD) systems have become available. However, associated cardiac MR image (MRI) quality is unknown. The goal was to evaluate the image quality performance of various cardiac MR sequences in a multicenter trial of patients implanted with an MR-conditional ICD system. The Evera-MRI trial enrolled 275 patients in 42 centers worldwide. There were 263 patients implanted with an Evera-MRI single- or dual-chamber ICD and randomized to controls (n=88) and MRI (n=175), 156 of whom underwent a protocol-required MRI (9-12 weeks post implant). Steady-state-free-precession (SSFP) and fast-gradient-echo (FGE) sequences were acquired in short-axis and horizontal long-axis orientations. Qualitative and quantitative assessment of image quality was performed by using a 7-point scale (grades 1-3: good quality, grades 6-7: nondiagnostic) and measuring ICD- and lead-related artifact size. Good to moderate image quality (grades 1-5) was obtained in 53% and 74% of SSFP and FGE acquisitions, respectively, covering the left ventricle, and in 69% and 84%, respectively, covering the right ventricle. Odds for better image quality were greater for right ventricle versus left ventricle (odds ratio, 1.8; 95% confidence interval, 1.5-2.2; P<0.0001) and greater for FGE versus SSFP (odds ratio, 3.5; 95% confidence interval, 2.5-4.8; P<0.0001). Compared with SSFP, ICD-related artifacts on FGE were smaller (141±65 versus 75±57 mm, respectively; P<0.0001). Lead artifacts were much smaller than ICD artifacts (P<0.0001). FGE yields good to moderate quality in 74% of left ventricle and 84% of right ventricle acquisitions and performs better than SSFP in patients with an MRI-conditional ICD system. In these patients, cardiac MRI can offer diagnostic information in most cases. URL: http://www.clinicaltrials.gov. Unique identifier: NCT02117414. © 2016 American Heart Association, Inc.

[To improve the quality of requisitions for radiologic examinations].

PubMed

Roussel, P; Lelièvre, N

2002-05-01

This article presents the different steps implemented in order to improve the quality of requisitions for radiologic examinations in a hospital. and methods. The radiology requests sent from clinical units are periodically analyzed using criteria about tracking, prescription and security required for a good examination. Results are discussed with the clinical units in order to achieve improvements. The periodical analysis of nonconformities shows a gradual improvement of practices. This action contributes to the realization of a single document for every request of examination or analysis in the hospital. The described action is in the context of French regulations, first about the practice of radiology, second about the obligation of quality improvement that health care facilities now have to implement for their accreditation.

Quality control: can compounding pharmacy learn from the automotive industry?

PubMed

Dillon, L Rad

2014-01-01

The healthcare system is vast in scope, with constant concerns of how the system's major changes will affect the quality of future patient care. This article concerns only one small corner of the healthcare system--pharmaceutical compounding. Despite our best efforts, we are not going to single-handedly change all of the grim statistics, no matter how many years we are given or how much assistance Americans obtain from their international colleagues. Yet, the "good" news is that although in my opinion the overall quality of America's healthcare system has declined, perhaps the modest niche of compounding pharmacy can become a role model of what actually works and can offer immense opportunities to improve the efficiency and effectiveness of health care.

Spatial walk-off compensated beta-barium borate stack for efficient deep-UV generation

NASA Astrophysics Data System (ADS)

Li, Da; Lee, Huai-Chuan; Meissner, Stephanie K.; Meissner, Helmuth E.

2018-02-01

Beta-Barium Borate (β-BBO) crystal is commonly used in nonlinear frequency conversion from visible to deep ultraviolet (DUV). However, in a single crystal BBO, its large spatial walk-off effect will reduce spatial overlap of ordinary and extraordinary beam, and thus degrade the conversion efficiency. To overcome the restrictions in current DUV conversion systems, Onyx applies adhesive-free bonding technique to replace the single crystal BBO with a spatial Walk-off Compensated (WOC) BBO stack, which is capable of correcting the spatial walk-off while retaining a constant nonlinear coefficient in the adjacent bonding layers. As a result, the β-BBO stack will provide good beam quality, high conversion efficiency, and broader acceptance angle and spectral linewidth, when compared with a single crystal of BBO. In this work, we report on performance of a spatial walk-off compensated β-BBO stack with adhesive-free bonding technique, for efficiently converting from the visible to DUV range. The physics behind the WOC BBO stack are demonstrated, followed by simulation of DUV conversion efficiency in an external resonance cavity. We also demonstrate experimentally the beam quality improvement in a 4-layer WOC BBO stack over a single BBO crystal.

A new method for water quality assessment: by harmony degree equation.

PubMed

Zuo, Qiting; Han, Chunhui; Liu, Jing; Ma, Junxia

2018-02-22

Water quality assessment is an important basic work in the development, utilization, management, and protection of water resources, and also a prerequisite for water safety. In this paper, the harmony degree equation (HDE) was introduced into the research of water quality assessment, and a new method for water quality assessment was proposed according to the HDE: by harmony degree equation (WQA-HDE). First of all, the calculation steps and ideas of this method were described in detail, and then, this method with some other important methods of water quality assessment (single factor assessment method, mean-type comprehensive index assessment method, and multi-level gray correlation assessment method) were used to assess the water quality of the Shaying River (the largest tributary of the Huaihe in China). For this purpose, 2 years (2013-2014) dataset of nine water quality variables covering seven monitoring sites, and approximately 189 observations were used to compare and analyze the characteristics and advantages of the new method. The results showed that the calculation steps of WQA-HDE are similar to the comprehensive assessment method, and WQA-HDE is more operational comparing with the results of other water quality assessment methods. In addition, this new method shows good flexibility by setting the judgment criteria value HD 0 of water quality; when HD 0  = 0.8, the results are closer to reality, and more realistic and reliable. Particularly, when HD 0  = 1, the results of WQA-HDE are consistent with the single factor assessment method, both methods are subject to the most stringent "one vote veto" judgment condition. So, WQA-HDE is a composite method that combines the single factor assessment and comprehensive assessment. This research not only broadens the research field of theoretical method system of harmony theory but also promotes the unity of water quality assessment method and can be used for reference in other comprehensive assessment.

Additive Manufacturing of Single-Crystal Superalloy CMSX-4 Through Scanning Laser Epitaxy: Computational Modeling, Experimental Process Development, and Process Parameter Optimization

NASA Astrophysics Data System (ADS)

Basak, Amrita; Acharya, Ranadip; Das, Suman

2016-08-01

This paper focuses on additive manufacturing (AM) of single-crystal (SX) nickel-based superalloy CMSX-4 through scanning laser epitaxy (SLE). SLE, a powder bed fusion-based AM process was explored for the purpose of producing crack-free, dense deposits of CMSX-4 on top of similar chemistry investment-cast substrates. Optical microscopy and scanning electron microscopy (SEM) investigations revealed the presence of dendritic microstructures that consisted of fine γ' precipitates within the γ matrix in the deposit region. Computational fluid dynamics (CFD)-based process modeling, statistical design of experiments (DoE), and microstructural characterization techniques were combined to produce metallurgically bonded single-crystal deposits of more than 500 μm height in a single pass along the entire length of the substrate. A customized quantitative metallography based image analysis technique was employed for automatic extraction of various deposit quality metrics from the digital cross-sectional micrographs. The processing parameters were varied, and optimal processing windows were identified to obtain good quality deposits. The results reported here represent one of the few successes obtained in producing single-crystal epitaxial deposits through a powder bed fusion-based metal AM process and thus demonstrate the potential of SLE to repair and manufacture single-crystal hot section components of gas turbine systems from nickel-based superalloy powders.

Quality of Life Measures Following Laser Assisted Uvulopalatopharyngoplasty (LAUP) in Obstructive Sleep Apnoea Syndrome (OSAS).

PubMed

Mohanty, Sanjeev; Gopinath, M; Subramanian, Mukundan; Sudhir, Archana

2014-01-01

The objective of this study is to assess the efficacy of laser assisted uvulopalatopharyngoplasty in the treatment of Obstructive Sleep Apnoea Syndrome. This study was conducted over a period of 2 years and comprised of a total of 18 patients of both sexes, from a pool of 64 patients who presented with clinical features of OSAS. All the surgeries were done by the same surgeon and standardised criteria for diagnosis was followed. Only those Patients who were diagnosed to have moderate to severe OSAS of the obstructive type with single level retro palatal obstruction were treated surgically with LAUP, and followed up for a period of 6 months. Of the 18 patients 16 reported of improvement in quality of life, as assessed by Functional Outcomes of Sleep Questionnaire (FOSQ), accounting for 88.8%. The results support the surgical treatment for OSAS of moderate to severe single level retro palatal type, as evidenced by the FOSQ scoring. LAUP is a very good surgical option in alleviating the symptoms of moderate to severe single level retro palatal OSAS.

Unidirectional growth of benzil crystal from solution by Sankaranarayanan-Ramasamy method and its characterization

NASA Astrophysics Data System (ADS)

Rajalakshmi, M.; Shyju, T. S.; Indirajith, R.; Gopalakrishnan, R.

2012-02-01

Good quality <1 0 0> benzil single crystal with a diameter 18 mm and length 75 mm was successfully grown from solution by the unidirectional growth method of Sankaranarayanan-Ramasamy (SR) for the first time in the literature. The seed crystals have been harvested from conventional solution growth technique and subsequently used for unidirectional growth. The grown crystal was subjected to various characterization studies. The results of UV-vis spectral analysis, photoluminescence, etching and microhardness studies were compared with conventional solution grown crystal to that of SR method grown crystal. The quality of SR method grown benzil crystal is better than conventional solution grown crystal.

Antimisting Kerosene: Base Fuel Effects; Blending and Quality Control Techniques.

DTIC Science & Technology

1984-01-01

Jet A in a single short period of mixing followed by a 20-minute development. Judging from the filter -. , ratio, the products are as good or better...assumes no liability Eor the contents or use thereof. The United States Government does not endorse products or manufacturers. Trade or manufacturer’s names...LINE BLENDING: EFFECTS OF ADDING THE SECOND MIXING STAGE -------------------------------------- 36 Table 13. IN-LINE BLENDING: RESISTANCE TO MECHANICAL

7 CFR 51.485 - Good internal quality.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 7 Agriculture 2 2010-01-01 2010-01-01 false Good internal quality. 51.485 Section 51.485... STANDARDS) United States Standards for Grades of Cantaloups 1 Definitions § 51.485 Good internal quality. Good internal quality means that the combined juice from the edible portion of a sample of cantaloups...

Genomic Insights into Geothermal Spring Community Members using a 16S Agnostic Single-Cell Approach

NASA Astrophysics Data System (ADS)

Bowers, R. M.

2016-12-01

INSTUTIONS (ALL): DOE Joint Genome Institute, Walnut Creek, CA USA. Bigelow Laboratory for Ocean Sciences, East Boothbay, ME USA. Department of Biological Sciences, University of Calgary, Calgary, Alberta, Canada. ABSTRACT BODY: With recent advances in DNA sequencing, rapid and affordable screening of single-cell genomes has become a reality. Single-cell sequencing is a multi-step process that takes advantage of any number of single-cell sorting techniques, whole genome amplification (WGA), and 16S rRNA gene based PCR screening to identify the microbes of interest prior to shotgun sequencing. However, the 16S PCR based screening step is costly and may lead to unanticipated losses of microbial diversity, as cells that do not produce a clean 16S amplicon are typically omitted from downstream shotgun sequencing. While many of the sorted cells that fail the 16S PCR step likely originate from poor quality amplified DNA, some of the cells with good WGA kinetics may instead represent bacteria or archaea with 16S genes that fail to amplify due to primer mis-matches or the presence of intervening sequences. Using cell material from Dewar Creek, a hot spring in British Columbia, we sequenced all sorted cells with good WGA kinetics irrespective of their 16S amplification success. We show that this high-throughput approach to single-cell sequencing (i) can reduce the overall cost of single-cell genome production, and (ii). may lead to the discovery of previously unknown branches on the microbial tree of life.

Improving indoor air quality through the use of continual multipoint monitoring of carbon dioxide and dew point.

PubMed

Bearg, D W

1998-09-01

This article summarizes an approach for improving the indoor air quality (IAQ) in a building by providing feedback on the performance of the ventilation system. The delivery of adequate quantities of ventilation to all building occupants is necessary for the achievement of good IAQ. Feedback on the performance includes information on the adequacy of ventilation provided, the effectiveness of the distribution of this air, the adequacy of the duration of operation of the ventilation system, and the identification of leakage into the return plenum, either of outdoor or supply air. Keeping track of ventilation system performance is important not only in terms of maintaining good IAQ, but also making sure that this system continues to perform as intended after changes in building use. Information on the performance of the ventilation system is achieved by means of an automated sampling system that draws air from multiple locations and delivers it to both a carbon dioxide monitor and dew point sensor. The use of single shared sensors facilitates calibration checks as well as helps to guarantee data integrity. This approach to monitoring a building's ventilation system offers the possibility of achieving sustainable performance of this important aspect of good IAQ.

Optimization of single shot 3D breath-hold non-enhanced MR angiography of the renal arteries.

PubMed

Tan, Huan; Koktzoglou, Ioannis; Glielmi, Christopher; Galizia, Mauricio; Edelman, Robert R

2012-05-19

Cardiac and navigator-gated, inversion-prepared non-enhanced magnetic resonance angiography techniques can accurately depict the renal arteries without the need for contrast administration. However, the scan time and effectiveness of navigator-gated techniques depend on the subject respiratory pattern, which at times results in excessively prolonged scan times or suboptimal image quality. A single-shot 3D magnetization-prepared steady-state free precession technique was implemented to allow the full extent of the renal arteries to be depicted within a single breath-hold. Technical optimization of the breath-hold technique was performed with fourteen healthy volunteers. An alternative magnetization preparation scheme was tested to maximize inflow signal. Quantitative and qualitative comparisons were made between the breath-hold technique and the clinically accepted navigator-gated technique in both volunteers and patients on a 1.5 T scanner. The breath-hold technique provided an average of seven fold reduction in imaging time, without significant loss of image quality. Comparable single-to-noise and contrast-to-noise ratios of intra- and extra-renal arteries were found between the breath-hold and the navigator-gated techniques in volunteers. Furthermore, the breath-hold technique demonstrated good image quality for diagnostic purposes in a small number of patients in a pilot study. The single-shot, breath-hold technique offers an alternative to navigator-gated methods for non-enhanced renal magnetic resonance angiography. The initial results suggest a potential supplementary clinical role for the breath-hold technique in the evaluation of suspected renal artery diseases.

[Cooperation, Job Satisfaction and Burn Out - Sustainability in Outpatient Mental Health Care among Medical Specialists in Germany].

PubMed

Baumgardt, Johanna; Moock, Jörn; Rössler, Wulf; Kawohl, Wolfram

2017-04-01

Objective Cooperation, job satisfaction, and burn out risk are indicators of sustainability in mental health services. Thus they were assessed among registered medical specialists in outpatient mental health care in Germany. Method A postal survey consisting of three questionnaires about cooperation, job satisfaction, and burnout was carried out among all registered medical specialists in outpatient mental health care in Germany (n = 4,430). Results 14.1 % (n = 626) of the specialists responded to the survey. Quality and quantity of cooperation regarding mental health care services were rated diverse, job satisfaction was assessed medium to high, and burnout risk was low to medium. Higher job satisfaction correlated with good quality of cooperation, fewer years of practice, fewer patients' chronically ill, more patients who as well seek psychotherapy, and less time spent on cooperation. Low burn out risk correlated with good quality of cooperation, higher age, single practice setting and a higher amount of patients who as well seek psychotherapy. Conclusion Quality and quantity of cooperation in outpatient mental health care - especially regarding community mental health care institutions - should be fostered. Aspects to be considered to reinforce job satisfaction and minimize burn out risk are age, years of practice, quality and quantity of cooperation, practice setting, and the mixture of patients. © Georg Thieme Verlag KG Stuttgart · New York.

A rapid and efficient SDS-based RNA isolation protocol from different tissues of coffee.

PubMed

Huded, Arun Kumar C; Jingade, Pavankumar; Mishra, Manoj Kumar

2018-03-01

Isolation of high-quality RNA from coffee is challenging because of high level of polysaccharides, polyphenols and other secondary metabolites. In the present study, a rapid and efficient RNA extraction protocol from different tissues of coffee was optimized. Sufficiently high quality and quantity (225.6-454.8 µg/g) of RNA was obtained by using the optimized protocol. The presence of two distinct bands of 28S rRNA and 18S rRNA in agarose gel proved the intactness of the RNA samples. The average spectrophotometric values of the isolated RNA ranged from 1.96 to 2.02 ( A 260/280 ) and 1.95 to 2.14 ( A 260/230 ), indicating the high quality of RNA devoid of polyphenols, polysaccharides and protein contamination. In the optimized protocol, addition of PVPP to the extraction buffer and a brief incubation of samples at 65 °C and subsequent purification with potassium acetate resulted in good-quality RNA isolation. The suitability of RNA for downstream processing was confirmed by PCR amplification with cytochrome c oxidase gene-specific primers. The amplification of a single 392 bp fragment using cDNA and 1.5 kb fragment using genomic DNA samples confirmed the absence of DNA contamination. The present protocol is rapid and yielded good quality and quantity of RNA suitable for functional genomics studies.

Available web-based dental implants information for patients. How good is it?

PubMed

Leira-Feijoo, Yago; Ledesma-Ludi, Yanina; Seoane-Romero, Juan M; Blanco-Carrión, Juan; Seoane, Juan; Varela-Centelles, Pablo

2015-11-01

Massive use of the Internet for health issues has raised concerns about the quality of the information available and about consumers' ability to tell "good" from "bad" information. To assess the quality of patient-addressed, dental implants-related websites in terms of reliability, accessibility, usability and readability. Two search engines (Google and Yahoo) were used in this study. The first 100 sites, as listed by each engine, were considered for the study. Each site was categorised and analysed for quality using the DISCERN and the LIDA instruments. The Flesch-Kinkaid Reading Grade Level (FKRGL) and the Flesh Reading Ease Score (FRES) were used to assess legibility. After applying the inclusion and exclusion criteria, 32 single websites entered the study. The median score for the DISCERN instrument (3 [2-3]) indicated serious or potentially important shortcoming in the quality of the information obtained. LIDA scores showed modest percentages for accessibility (79.36 [74.60-85.31]) and intermediate for usability (59.20 (50.46-68.51)) and reliability (55.55 [45.37-66.66]). Legibility indices reached scores within the range of difficult to read (FRES = 51.72 [38.70-55.27]); FKRGL = 12.76 [10.07-14.87]). Available e-health information on dental implants in English language is difficult to read for the average patient and poor in terms of quality. © 2014 John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.

Wavefront measurement of single-mode quantum cascade laser beam for seed application in laser-produced plasma extreme ultraviolet system.

PubMed

Nowak, Krzysztof M; Ohta, Takeshi; Suganuma, Takashi; Yokotsuka, Toshio; Fujimoto, Junichi; Mizoguchi, Hakaru

2012-12-01

Quantum cascade laser (QCL) is a very attractive seed source for a multikilowatt pulsed CO2 lasers applied for driving extreme ultraviolet emitting plasmas. In this Letter, we investigate output beam properties of a QCL designed to address P18 and P20 lines of 10.6 micron band of CO2 molecule. In particular, output beam quality and stability are investigated for the first time. A well-defined linear polarization and a single-mode operation enabled a use of phase retrieval method for full description of QCL output beam. A direct, multi-image numerical phase retrieval technique was developed and successfully applied to the measured intensity patterns of a QCL beam. Very good agreement between the measured and reconstructed beam profiles was observed at distances ranging from QCL aperture to infinity, proving a good understanding of the beam propagation. The results also confirm a high spatial coherence and high stability of the beam parameters, the features expected from an excellent seed source.

Stallion spermatozoa selected by single layer centrifugation are capable of fertilization after storage for up to 96 h at 6°C prior to artificial insemination

PubMed Central

2012-01-01

Background One of the challenges faced by equine breeders is ensuring delivery of good quality semen doses for artificial insemination when the mare is due to ovulate. Single Layer Centrifugation (SLC) has been shown to select morphologically normal spermatozoa with intact chromatin and good progressive motility from the rest of the ejaculate, and to prolong the life of these selected spermatozoa in vitro. The objective of the present study was a proof of concept, to determine whether fertilizing ability was retained in SLC-selected spermatozoa during prolonged storage. Findings Sixteen mares were inseminated with SLC-selected sperm doses that had been cooled and stored at 6°C for 48 h, 72 h or 96 h. Embryos were identified in 11 mares by ultrasound examination 16–18 days after presumed ovulation. Conclusion SLC-selected stallion spermatozoa stored for up to 96 h are capable of fertilization. PMID:22788670

Crystal growth of triphenylphosphine oxide 4-nitrophenol (TP4N) for nonlinear optical (NLO) applications

NASA Astrophysics Data System (ADS)

Pandian, Muthu Senthil; Karuppasamy, P.; Kamalesh, T.; Ramasamy, P.; Verma, Sunil

2018-04-01

The optically good quality organic single crystals of triphenylphosphine oxide 4-nitrophenol (TP4N) were successfully grown by slow evaporation solution technique (SEST) using methanol as solvent. The lattice parameters of the grown crystal were confirmed by single crystal X-ray diffraction analysis. The optical transmittance, cut-off wavelength and band gap of the TP4N crystal were obtained by UV-Vis NIR spectrum analysis. The photoluminescence studies were carried out to find out the luminesce properties of TP4N single crystal. The photoconductivity studies reveal that the TP4N crystal has negative photoconductive nature. The third order nonlinear susceptibility (χ(3)) of TP4N crystal was evaluated using the Z-scan technique at 640 nm.

Growth, optical, ICP and thermal studies of nonlinear optical single crystal: Sodium acid phthalate (NaAP)

NASA Astrophysics Data System (ADS)

Mahadevan, M.; Arivanandhan, M.; Elangovan, K.; Anandan, P.; Ramachandran, K.

2017-07-01

Good quality single crystals of sodium acid phthalate (NaAP) were grown by slow evaporation technique. Single crystal X-ray diffraction study of the grown crystal reveals that the crystal belongs to orthorhombic system with space group B2ab. Fourier transform infrared spectrum confirms the presence of the functional groups of the grown material. Inductively coupled plasma emission spectroscopy analysis is used to confirm the presence of Na element in the sample. Thermal analysis of the NaAP crystal shows that the crystal is stable up to 140°C. Optical transmittance of the grown crystal was recorded in the wavelength range from 200 and 800 nm using UV-Vis-NIR spectrophotometer. The second harmonic generation of NaAP was analysed using Kurtz powder technique.

Ultraviolet electroluminescence from hetero p-n junction between a single ZnO microsphere and p-GaN thin film.

PubMed

Tetsuyama, Norihiro; Fusazaki, Koshi; Mizokami, Yasuaki; Shimogaki, Tetsuya; Higashihata, Mitsuhiro; Nakamura, Daisuke; Okada, Tatsuo

2014-04-21

We report ultraviolet electroluminescence from a hetero p-n junction between a single ZnO microsphere and p-GaN thin film. ZnO microspheres, which have high crystalline quality, have been synthesized by ablating a ZnO sintered target. It was found that synthesized ZnO microspheres had a high-optical property and exhibit the laser action in the whispering gallery mode under pulsed optical pumping. A hetero p-n junction was formed between the single ZnO microsphere/ p-GaN thin film, and a good rectifying property with a turn-on voltage of approximately 6 V was observed in I-V characteristic across the junction. Ultraviolet and visible electroluminescence were observed under forward bias.

Large scale atomistic simulation of single-layer graphene growth on Ni(111) surface: molecular dynamics simulation based on a new generation of carbon-metal potential

NASA Astrophysics Data System (ADS)

Xu, Ziwei; Yan, Tianying; Liu, Guiwu; Qiao, Guanjun; Ding, Feng

2015-12-01

To explore the mechanism of graphene chemical vapor deposition (CVD) growth on a catalyst surface, a molecular dynamics (MD) simulation of carbon atom self-assembly on a Ni(111) surface based on a well-designed empirical reactive bond order potential was performed. We simulated single layer graphene with recorded size (up to 300 atoms per super-cell) and reasonably good quality by MD trajectories up to 15 ns. Detailed processes of graphene CVD growth, such as carbon atom dissolution and precipitation, formation of carbon chains of various lengths, polygons and small graphene domains were observed during the initial process of the MD simulation. The atomistic processes of typical defect healing, such as the transformation from a pentagon into a hexagon and from a pentagon-heptagon pair (5|7) to two adjacent hexagons (6|6), were revealed as well. The study also showed that higher temperature and longer annealing time are essential to form high quality graphene layers, which is in agreement with experimental reports and previous theoretical results.To explore the mechanism of graphene chemical vapor deposition (CVD) growth on a catalyst surface, a molecular dynamics (MD) simulation of carbon atom self-assembly on a Ni(111) surface based on a well-designed empirical reactive bond order potential was performed. We simulated single layer graphene with recorded size (up to 300 atoms per super-cell) and reasonably good quality by MD trajectories up to 15 ns. Detailed processes of graphene CVD growth, such as carbon atom dissolution and precipitation, formation of carbon chains of various lengths, polygons and small graphene domains were observed during the initial process of the MD simulation. The atomistic processes of typical defect healing, such as the transformation from a pentagon into a hexagon and from a pentagon-heptagon pair (5|7) to two adjacent hexagons (6|6), were revealed as well. The study also showed that higher temperature and longer annealing time are essential to form high quality graphene layers, which is in agreement with experimental reports and previous theoretical results. Electronic supplementary information (ESI) available. See DOI: 10.1039/c5nr06016h

Growth, structural, optical, mechanical and quantum chemical analysis of unidirectional grown bis(guanidinium) 5-sulfosalicylate (BGSSA) single crystal

NASA Astrophysics Data System (ADS)

Sreedevi, R.; Saravana Kumar, G.; Amarsingh Bhabu, K.; Balu, T.; Murugakoothan, P.; Rajasekaran, T. R.

2018-02-01

Bis(guanidinium) 5-sulfosalicylate single crystal was grown by using Sankaranarayanan-Ramasamy (SR) method from the solution of methanol and water in equimolar ratio. Good quality crystal with 50 mm length and 10 mm in diameter was grown. The grown crystal was subjected to single crystal X-ray diffraction analysis to confirm the crystal structure and it was found to be orthorhombic. UV-Vis-NIR spectroscopic study revealed that the SR method grown crystal had good optical transparency with wide optical band gap of 4.4 eV. The presence of the functional groups and modes of vibrations were identified by FTIR spectroscopy recorded in the range 4000-400 cm-1. The mechanical strength of the grown crystal was confirmed using Vickers microhardness tester by applying load from 25 g to 100 g. Density functional theory (DFT) method with B3LYP/6-31-G (d,p) level basis set was employed and hence the optimized molecular geometry, first order hyperpolarizability, dipole moment, thermodynamic functions, molecular electrostatic potential and frontier molecular orbital analysis of the grown BGSSA sample was computed and analysed.

Growth of PBI 2 single crystals from stoichiometric and Pb excess melts

NASA Astrophysics Data System (ADS)

Hayashi, T.; Kinpara, M.; Wang, J. F.; Mimura, K.; Isshiki, M.

2008-01-01

We have successfully grown high-purity and -quality PbI 2 single crystals by the vertical Bridgman method. The rocking curves of four-crystal X-ray diffraction (XRD) show 120 arcsec in full-width at half-maximum (FWHM). The photoluminescence (PL) spectra at 7.8 K show the resolved intensive exciton emission line and the weak DAP emission band. The deep-level emissions are not observed. The measurement of the electrical and radiographic properties show that Leadiodide (PbI 2) single crystal has a resistivity of 5×10 10 Ω cm and imager lag is 8 s, respectively. In order to improve the controllability of crystal growth, PbI 2 single crystals were also grown from a lead (Pb) excess PbI 2 source. The experimental results show very good reproducibility. In addition, the growth models of crystal are proposed, and the growth mechanism is discussed.

970-nm ridge waveguide diode laser bars for high power DWBC systems

NASA Astrophysics Data System (ADS)

Wilkens, Martin; Erbert, Götz; Wenzel, Hans; Knigge, Andrea; Crump, Paul; Maaßdorf, Andre; Fricke, Jörg; Ressel, Peter; Strohmaier, Stephan; Schmidt, Berthold; Tränkle, Günther

2018-02-01

de lasers are key components in material processing laser systems. While mostly used as pump sources for solid state or fiber lasers, direct diode laser systems using dense wavelength multiplexing have come on the market in recent years. These systems are realized with broad area lasers typically, resulting in beam quality inferior to disk or fiber lasers. We will present recent results of highly efficient ridge waveguide (RW) lasers, developed for dense-wavelength-beamcombining (DWBC) laser systems expecting beam qualities comparable to solid state laser systems and higher power conversion efficiencies (PCE). The newly developed RW lasers are based on vertical structures with an extreme double asymmetric large optical cavity. Besides a low vertical divergence these structures are suitable for RW-lasers with (10 μm) broad ridges, emitting in a single mode with a good beam quality. The large stripe width enables a lateral divergence below 10° (95 % power content) and a high PCE by a comparably low series resistance. We present results of single emitters and small test arrays under different external feedback conditions. Single emitters can be tuned from 950 nm to 975 nm and reach 1 W optical power with more than 55 % PCE and a beam quality of M2 < 2 over the full wavelength range. The spectral width is below 30 pm FWHM. 5 emitter arrays were stabilized using the same setup. Up to now we reached 3 W optical power, limited by power supply, with 5 narrow spectral lines.

Gibberellic acid (GA3) induced changes in proanthocyanidins and malt quality of two- and six-row husked barleys.

PubMed

Yadav, S K; Luthra, Y P; Sood, D R; Aggarwal, N K

2000-01-01

Analysis of husked barleys for proanthocyanidins and malt quality attributes has shown that not a single variety is free of proanthocyanidins. The proanthocyanidins in barley grains varied from 3.85 to 4.94 mg/g as catechin equivalent. The concentration of proanthocyanidins decreased, while total soluble sugars, reducing sugars, diastatic power and beta-amylase activity increased during maltings as well as with exogenous gibberellic acid (GA3) application. Alfa 93 (two-row) and RD2560 (six-row) varieties appeared to be superior for malting and brewing purposes on the basis of proanthocyanidins, total phenols, diastatic power and beta-amylase activity. It is suggested that exogenous application of GA3 at 15 ppm may be useful for producing good quality malt from barley grains.

Feature maps driven no-reference image quality prediction of authentically distorted images

NASA Astrophysics Data System (ADS)

Ghadiyaram, Deepti; Bovik, Alan C.

2015-03-01

Current blind image quality prediction models rely on benchmark databases comprised of singly and synthetically distorted images, thereby learning image features that are only adequate to predict human perceived visual quality on such inauthentic distortions. However, real world images often contain complex mixtures of multiple distortions. Rather than a) discounting the effect of these mixtures of distortions on an image's perceptual quality and considering only the dominant distortion or b) using features that are only proven to be efficient for singly distorted images, we deeply study the natural scene statistics of authentically distorted images, in different color spaces and transform domains. We propose a feature-maps-driven statistical approach which avoids any latent assumptions about the type of distortion(s) contained in an image, and focuses instead on modeling the remarkable consistencies in the scene statistics of real world images in the absence of distortions. We design a deep belief network that takes model-based statistical image features derived from a very large database of authentically distorted images as input and discovers good feature representations by generalizing over different distortion types, mixtures, and severities, which are later used to learn a regressor for quality prediction. We demonstrate the remarkable competence of our features for improving automatic perceptual quality prediction on a benchmark database and on the newly designed LIVE Authentic Image Quality Challenge Database and show that our approach of combining robust statistical features and the deep belief network dramatically outperforms the state-of-the-art.

Post-copulatory sexual selection and female fitness in Scathophaga stercoraria.

PubMed

Martin, Oliver Y; Hosken, David J; Ward, Paul I

2004-02-22

Whether sexual selection increases or decreases female fitness is determined by the occurrence and relative importance of sexual-conflict processes and the ability of females to choose high-quality males. Experimentally enforced polyandry and monogamy have previously been shown to cause rapid evolution in the yellow dung fly Scathophaga stercoraria. Flies from polyandrous lines invested more in reproductive tissue, and this investment influenced paternity in sperm competition, but came at a cost to immune function. While some fitness consequences of enforced polyandry or monogamy have been examined when flies mate multiply, the consequences for female fitness when singly copulated remain unexplored. Under a good-genes scenario females from polyandrous lines should be of higher general quality and should outperform females from monogamous lines even with a single copulation. Under sexual conflict, costly adaptations will afford no advantages when females are allowed to mate only once. We investigate the lifetime reproductive success and longevity of females evolving under enforced monogamy or polyandry when mating once with males from these selection regimes. Females from polyandrous lines were found to have lower fitness than their monogamous counterparts when mating once. They died earlier and produced significantly fewer eggs and offspring. These results suggest that sexual conflict probably drove evolution under enforced polyandry as female fitness did not increase overall as expected with purely good-genes effects.

The Empower project - a new way of assessing and monitoring test comparability and stability.

PubMed

De Grande, Linde A C; Goossens, Kenneth; Van Uytfanghe, Katleen; Stöckl, Dietmar; Thienpont, Linda M

2015-07-01

Manufacturers and laboratories might benefit from using a modern integrated tool for quality management/assurance. The tool should not be confounded by commutability issues and focus on the intrinsic analytical quality and comparability of assays as performed in routine laboratories. In addition, it should enable monitoring of long-term stability of performance, with the possibility to quasi "real-time" remedial action. Therefore, we developed the "Empower" project. The project comprises four pillars: (i) master comparisons with panels of frozen single-donation samples, (ii) monitoring of patient percentiles and (iii) internal quality control data, and (iv) conceptual and statistical education about analytical quality. In the pillars described here (i and ii), state-of-the-art as well as biologically derived specifications are used. In the 2014 master comparisons survey, 125 laboratories forming 8 peer groups participated. It showed not only good intrinsic analytical quality of assays but also assay biases/non-comparability. Although laboratory performance was mostly satisfactory, sometimes huge between-laboratory differences were observed. In patient percentile monitoring, currently, 100 laboratories participate with 182 devices. Particularly, laboratories with a high daily throughput and low patient population variation show a stable moving median in time with good between-instrument concordance. Shifts/drifts due to lot changes are sometimes revealed. There is evidence that outpatient medians mirror the calibration set-points shown in the master comparisons. The Empower project gives manufacturers and laboratories a realistic view on assay quality/comparability as well as stability of performance and/or the reasons for increased variation. Therefore, it is a modern tool for quality management/assurance toward improved patient care.

Quality evaluation of rice bran protein isolate-based weaning food for preschoolers.

PubMed

Khan, Saima H; Butt, Masood S; Anjum, Faqir M; Sameen, Ayesha

2011-05-01

Agro-industrial waste 'rice bran' was stabilized and the extracted protein isolates were used as ingredients to make nutritive complimentary food for the growing infants. The formulation processed through drum drying and the starchy ingredients were pregelatinized to reduce bulk in the prepared meal and facilitate spoon-feeding. The formulations had uniform texture, light golden color and good paste consistency. Nutrient composition was good enough to meet standards for supplementary infant foods. Caloric value remained up to 416 kcal/100 g with spoonable viscosity and 80.90-84.45% in vitro digestibility. A single meal could substantially contribute to the daily essential amino acid requirement. The formulation had good acceptability during a short-term infant-feeding trial. The present study can provide practical guideline for manufacturers as well as the nutritionist for the use of an economical and nutritive formulation for young children.

Solar radiation synthesis of functional carbonaceous materials using Al2O3/TiO2-Cu-HA doped catalyst

NASA Astrophysics Data System (ADS)

Stanciu, Elena Manuela; Pascu, Alexandru; Roată, Ionut Claudiu; Croitoru, Cătălin; Tierean, Mircea; Rosca, Julia Mirza; Hulka, Iosif

2018-04-01

Single carbon nanotubes were synthesized through a physical vapor deposition method, using concentrated solar radiation as means of vaporization and promoting the formation of carbonaceous plasma plume. A novel catalyst, containing multiple hybrid ceramic/metal phases has been obtained through flame spraying. In conjunction with this catalyst, good quality nanomaterials, such as long single-walled nanotubes and nanoparticles have been obtained and characterized by both morphological (SEM, TEM) as well as structural means on analysis (XRD, FTIR). A mild oxidation of the carbonaceous phase has been reported, which could prove useful in applications in conjunction with metals or hydrophilic polymers as potential matrices for nanocomposites obtaining.

Wide Bandgap Extrinsic Photoconductive Switches

DOE Office of Scientific and Technical Information (OSTI.GOV)

Sullivan, James S.

2012-01-20

Photoconductive semiconductor switches (PCSS) have been investigated since the late 1970s. Some devices have been developed that withstand tens of kilovolts and others that switch hundreds of amperes. However, no single device has been developed that can reliably withstand both high voltage and switch high current. Yet, photoconductive switches still hold the promise of reliable high voltage and high current operation with subnanosecond risetimes. Particularly since good quality, bulk, single crystal, wide bandgap semiconductor materials have recently become available. In this chapter we will review the basic operation of PCSS devices, status of PCSS devices and properties of the widemore » bandgap semiconductors 4H-SiC, 6H-SiC and 2H-GaN.« less

A Simple Inexpensive Bridgman-Stockbarger Crystal Growth System for Organic Materials

NASA Technical Reports Server (NTRS)

Choi, J.; Aggarwal, M. D.; Wang, W. S.; Metzl, R.; Bhat, K.; Penn, Benjamin G.; Frazier, Donald O.

1996-01-01

Direct observation of solid-liquid interface is important for the directional solidification to determine the desired interface shape by controlling the growth parameters. To grow good quality single crystals of novel organic nonlinear optical materials, a simple inexpensive Bridgman-Stockbarger (BS) crystal growth system has been designed and fabricated. Two immiscible liquids have been utilized to create two zones for this crystal growth system. Bulk single crystals of benzil derivative and n-salicylidene-aniline have been successfully grown in this system. The optimum lowering rate has been found to be 0.1 mm/h for the flat interface. Results on the crystal growth and other parameters of the grown crystals are presented.

Diagnostic value and cost-effectiveness of good quality digital images accompanying electronic referrals for suspected skin malignancies.

PubMed

Ng, Michael F Y; Stevenson, J Howard

2011-04-01

The aim of this study was to investigate the outcome and cost-effectiveness of good and poor quality photographs accompanying the electronic referrals for suspected skin malignancies. A retrospective study of 100 patients, divided into 2 groups, 50 with good quality photographs and 50 with poor quality photographs. Patients with no digital images, or who failed to attend, or patients with incomplete notes were excluded from the study. The treatment pathway, waiting times, and estimated cost between the 2 groups were compared. Good photographs were more likely to be treated at the 1-Stop Clinic (P = 0.05). Good images had a better positive predictive value than poor quality images (62.55% vs. 42.86%). Good quality images are more accurate than poor quality images in triaging of patients, and thus more effective in facilitating the treatment of malignant lesions timely. Good quality photographs allow a delayed appropriate treatment of benign lesions. This increases the safety for patients in a queue in a rationed health care system, and improves patient flow.

Taguchi's off line method and Multivariate loss function approach for quality management and optimization of process parameters -A review

NASA Astrophysics Data System (ADS)

Bharti, P. K.; Khan, M. I.; Singh, Harbinder

2010-10-01

Off-line quality control is considered to be an effective approach to improve product quality at a relatively low cost. The Taguchi method is one of the conventional approaches for this purpose. Through this approach, engineers can determine a feasible combination of design parameters such that the variability of a product's response can be reduced and the mean is close to the desired target. The traditional Taguchi method was focused on ensuring good performance at the parameter design stage with one quality characteristic, but most products and processes have multiple quality characteristics. The optimal parameter design minimizes the total quality loss for multiple quality characteristics. Several studies have presented approaches addressing multiple quality characteristics. Most of these papers were concerned with maximizing the parameter combination of signal to noise (SN) ratios. The results reveal the advantages of this approach are that the optimal parameter design is the same as the traditional Taguchi method for the single quality characteristic; the optimal design maximizes the amount of reduction of total quality loss for multiple quality characteristics. This paper presents a literature review on solving multi-response problems in the Taguchi method and its successful implementation in various industries.

Human Variome Project Quality Assessment Criteria for Variation Databases.

PubMed

Vihinen, Mauno; Hancock, John M; Maglott, Donna R; Landrum, Melissa J; Schaafsma, Gerard C P; Taschner, Peter

2016-06-01

Numerous databases containing information about DNA, RNA, and protein variations are available. Gene-specific variant databases (locus-specific variation databases, LSDBs) are typically curated and maintained for single genes or groups of genes for a certain disease(s). These databases are widely considered as the most reliable information source for a particular gene/protein/disease, but it should also be made clear they may have widely varying contents, infrastructure, and quality. Quality is very important to evaluate because these databases may affect health decision-making, research, and clinical practice. The Human Variome Project (HVP) established a Working Group for Variant Database Quality Assessment. The basic principle was to develop a simple system that nevertheless provides a good overview of the quality of a database. The HVP quality evaluation criteria that resulted are divided into four main components: data quality, technical quality, accessibility, and timeliness. This report elaborates on the developed quality criteria and how implementation of the quality scheme can be achieved. Examples are provided for the current status of the quality items in two different databases, BTKbase, an LSDB, and ClinVar, a central archive of submissions about variants and their clinical significance. © 2016 WILEY PERIODICALS, INC.

Growth of single-layer graphene on Ge (1 0 0) by chemical vapor deposition

NASA Astrophysics Data System (ADS)

Mendoza, C. D.; Caldas, P. G.; Freire, F. L.; Maia da Costa, M. E. H.

2018-07-01

The integration of graphene into nanoelectronic devices is dependent on the availability of direct deposition processes, which can provide uniform, large-area and high-quality graphene on semiconductor substrates such as Ge or Si. In this work, we synthesised graphene directly on p-type Ge (1 0 0) substrates by chemical vapour deposition. The influence of the CH4:H2 flow ratio on the graphene growth was investigated. Raman Spectroscopy, Raman mapping, Scanning Electron Microscopy, Atomic Force Microscopy and Scanning Tunnelling Microscopy/Scanning Tunnelling Spectroscopy results showed that good quality and homogeneous monolayer graphene over a large area can be achieved on Ge substrates directly with optimal growth conditions.

Unidirectional growth of benzil crystal from solution by Sankaranarayanan-Ramasamy method and its characterization.

PubMed

Rajalakshmi, M; Shyju, T S; Indirajith, R; Gopalakrishnan, R

2012-02-01

Good quality <100> benzil single crystal with a diameter 18 mm and length 75 mm was successfully grown from solution by the unidirectional growth method of Sankaranarayanan-Ramasamy (SR) for the first time in the literature. The seed crystals have been harvested from conventional solution growth technique and subsequently used for unidirectional growth. The grown crystal was subjected to various characterization studies. The results of UV-vis spectral analysis, photoluminescence, etching and microhardness studies were compared with conventional solution grown crystal to that of SR method grown crystal. The quality of SR method grown benzil crystal is better than conventional solution grown crystal. Copyright © 2011 Elsevier B.V. All rights reserved.

Predictive factors of long-term colorectal cancer survival after ultrasound-controlled ablation of hepatic metastases.

PubMed

Hernández-Socorro, Carmen Rosa; Saavedra, Pedro; Ramírez Felipe, José; Bohn Sarmiento, Uriel; Ruiz-Santana, Sergio

2017-04-21

The risk factors associated to long-term survival were assessed in patients with liver metastases of colorectal carcinoma undergoing ablative therapies. Single-centre cohort study, retrospectively analysed and prospectively collected consecutive patients with unresectable metastatic liver disease of colorectal carcinoma treated with ablative therapies between 1996 and 2013. Factors associated with survival time were identified using Cox's proportional hazard model with time-dependent covariates. A forward variable selection based on Akaike information criterion was performed. Relative risk and 95% confidence intervals for each factor were calculated. Statistical significance was set as P<.05. Seventy-five patients with liver metastases of colorectal cancer, with a mean age of 65.6 (10.3) underwent 106 treatments. Variables selected were good quality of life (RR 0.308, 95% CI 0.150-0.632) and tumour extension (RR 3.070, 95% CI 1.776-5.308). The median overall survival was 18.5 months (95% CI 17.4-24.4). The survival prognosis in median was 13.5 vs. 23.4 months for patients with and without tumour extension, and 23.0 vs. 12.8 months for patients with good and fair or poor quality of life, respectively. Good quality of life and tumour extension were the only statistically significant predictors of long-term survival in patients of colorectal carcinoma with liver metastatic disease undergoing ablative treatment with ultrasound. Copyright © 2016 Elsevier España, S.L.U. All rights reserved.

Backward pumping kilowatt Yb3+-doped double-clad fiber laser

NASA Astrophysics Data System (ADS)

Han, Z. H.; Lin, X. C.; Hou, W.; Yu, H. J.; Zhou, S. Z.; Li, J. M.

2011-09-01

A ytterbium-doped double-clad fiber laser generating up to 1026 W of continuous-wave output power at 1085 nm with a slope efficiency of 74% by single-ended backward pumping configuration is reported. The core diameter was 20 μm with a low numerical aperture of 0.06, and a good beam quality (BPP < 1.8 mm mrad) is achieved without special mode selection methods. No undesirable roll-over was observed in output power with increasing pump power, and the maximum output power was limited by the available pump power. The instability of maximum output power was better than ±0.6%. Different pumping configurations were also compared in experiment, which shows good agreements with theoretical analyses.

Ergodicity and model quality in template-restrained canonical and temperature/Hamiltonian replica exchange coarse-grained molecular dynamics simulations of proteins.

PubMed

Karczyńska, Agnieszka S; Czaplewski, Cezary; Krupa, Paweł; Mozolewska, Magdalena A; Joo, Keehyoung; Lee, Jooyoung; Liwo, Adam

2017-12-05

Molecular simulations restrained to single or multiple templates are commonly used in protein-structure modeling. However, the restraints introduce additional barriers, thus impairing the ergodicity of simulations, which can affect the quality of the resulting models. In this work, the effect of restraint types and simulation schemes on ergodicity and model quality was investigated by performing template-restrained canonical molecular dynamics (MD), multiplexed replica-exchange molecular dynamics, and Hamiltonian replica exchange molecular dynamics (HREMD) simulations with the coarse-grained UNRES force field on nine selected proteins, with pseudo-harmonic log-Gaussian (unbounded) or Lorentzian (bounded) restraint functions. The best ergodicity was exhibited by HREMD. It has been found that non-ergodicity does not affect model quality if good templates are used to generate restraints. However, when poor-quality restraints not covering the entire protein are used, the improved ergodicity of HREMD can lead to significantly improved protein models. © 2017 Wiley Periodicals, Inc. © 2017 Wiley Periodicals, Inc.

Scintillation characterization of the pure Tl2LiGdBr6 single crystal

NASA Astrophysics Data System (ADS)

Jang, Jonghun; Rooh, Gul; Kim, Sunghwan; Kim, HongJoo

2018-05-01

A pure Tl2LiGdBr6 (TLGB) single crystal was developed. This scintillator was grown by the two-zone vertical Bridgman technique. Owing to the improvement in the crystal quality of TLGB, excellent scintillation properties were observed. The characterization of this scintillation material was carried out under X- and γ-ray excitations. In the X-ray excitation emission spectrum, the Tl+ ion emission band was observed between 390 and 550 nm and peaked at 435 nm. Under 662 keV γ-ray excitation, the energy resolution and light yield of the grown sample were measured to be 7.2% (FWHM) and 27,000 ± 2,700 ph/MeV, respectively. In addition, under the same γ-ray excitation, scintillation decay time was also measured at room temperature. Three decay time components were found to be 56 ns (24%), 105 ns (53%), and 1.5 µs (23%). Further improvements in scintillation properties are expected with the good quality crystal of this compound.

The Implementation of "The n-term" Formula to Improve Student Ability in Determining the Rules of a Numeric Sequence

ERIC Educational Resources Information Center

In'am, Akhsanul; Hajar, Siti

2013-01-01

A good-quality teacher may determines a good-quality learning, thus good-quality students will be the results. In order to have a good-quality learning, a lot of strategies and methods can be adopted. The objective of this research is to improve students' ability in determining the rules of a numeric sequence and analysing the effectiveness of the…

Evaluation of fast highly undersampled contrast-enhanced MR angiography (sparse CE-MRA) in intracranial applications - initial study.

PubMed

Gratz, Marcel; Schlamann, Marc; Goericke, Sophia; Maderwald, Stefan; Quick, Harald H

2017-03-01

To assess the image quality of sparsely sampled contrast-enhanced MR angiography (sparse CE-MRA) providing high spatial resolution and whole-head coverage. Twenty-three patients scheduled for contrast-enhanced MR imaging of the head, (N = 19 with intracranial pathologies, N = 9 with vascular diseases), were included. Sparse CE-MRA at 3 Tesla was conducted using a single dose of contrast agent. Two neuroradiologists independently evaluated the data regarding vascular visibility and diagnostic value of overall 24 parameters and vascular segments on a 5-point ordinary scale (5 = very good, 1 = insufficient vascular visibility). Contrast bolus timing and the resulting arterio-venous overlap was also evaluated. Where available (N = 9), sparse CE-MRA was compared to intracranial Time-of-Flight MRA. The overall rating across all patients for sparse CE-MRA was 3.50 ± 1.07. Direct influence of the contrast bolus timing on the resulting image quality was observed. Overall mean vascular visibility and image quality across different features was rated good to intermediate (3.56 ± 0.95). The average performance of intracranial Time-of-Flight was rated 3.84 ± 0.87 across all patients and 3.54 ± 0.62 across all features. Sparse CE-MRA provides high-quality 3D MRA with high spatial resolution and whole-head coverage within short acquisition time. Accurate contrast bolus timing is mandatory. • Sparse CE-MRA enables fast vascular imaging with full brain coverage. • Volumes with sub-millimetre resolution can be acquired within 10 seconds. • Reader's ratings are good to intermediate and dependent on contrast bolus timing. • The method provides an excellent overview and allows screening for vascular pathologies.

7 CFR 51.481 - Very good internal quality.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 7 Agriculture 2 2010-01-01 2010-01-01 false Very good internal quality. 51.481 Section 51.481 Agriculture Regulations of the Department of Agriculture AGRICULTURAL MARKETING SERVICE (Standards... quality. Very good internal quality means that the combined juice from the edible portion of a sample of...

Clinical Rating of Movement-Pattern Quality in Patients With Femoroacetabular Impingement Syndrome: A Methodological Study.

PubMed

Casartelli, Nicola C; Maffiuletti, Nicola A; Brunner, Romana; Büchi, Marcel; Sutter, Reto; Pfirrmann, Christian W; Naal, Florian D; Leunig, Michael; Bizzini, Mario

2018-04-01

Study Design Cross-sectional study. Objectives To evaluate intrarater and interrater agreement among physical therapists with different clinical experience in performing a visual rating of movement-pattern quality of patients with femoroacetabular impingement (FAI) syndrome using a semi-quantitative scale. Background Visual rating of movement patterns in patients with FAI syndrome is of interest, because poor control of dynamic hip motion is frequently noted. Methods A video camera was used to record the performance of 34 patients with FAI syndrome performing single-limb standing, squat, frontal lunge, hop lunge, bridge, and plank. Visual rating of movement, as recorded on video, was performed by a highly experienced, a moderately experienced, and a novice physical therapist on 2 occasions using a semi-quantitative scale. Hip abductor strength was assessed using dynamometry, and hip pain and function were assessed with a patient-reported questionnaire. Intrarater and interrater agreement among physical therapists was evaluated using Gwet's agreement coefficient 1. Construct validity was evaluated as the association between physical therapists' rating and patients' hip abductor strength, pain, and function. Results Good intrarater and interrater agreement was observed in the highly experienced and moderately experienced physical therapists when rating single-limb standing, bridge, and plank. Poor to moderate intrarater and interrater agreement was found when they rated squat, frontal lunge, and hop lunge. Poor performers, as rated by the highly experienced physical therapist only, demonstrated lower hip abductor strength (P<.05), and similar hip pain and hip function compared to those of good performers. Conclusion Movement-pattern quality of patients with FAI syndrome should be rated by a highly experienced physical therapist. J Orthop Sports Phys Ther 2018;48(4):260-269. doi:10.2519/jospt.2018.7840.

Evaluation of a high framerate multi-exposure laser speckle contrast imaging setup

NASA Astrophysics Data System (ADS)

Hultman, Martin; Fredriksson, Ingemar; Strömberg, Tomas; Larsson, Marcus

2018-02-01

We present a first evaluation of a new multi-exposure laser speckle contrast imaging (MELSCI) system for assessing spatial variations in the microcirculatory perfusion. The MELSCI system is based on a 1000 frames per second 1-megapixel camera connected to a field programmable gate arrays (FPGA) capable of producing MELSCI data in realtime. The imaging system is evaluated against a single point laser Doppler flowmetry (LDF) system during occlusionrelease provocations of the arm in five subjects. Perfusion is calculated from MELSCI data using current state-of-the-art inverse models. The analysis displayed a good agreement between measured and modeled data, with an average error below 6%. This strongly indicates that the applied model is capable of accurately describing the MELSCI data and that the acquired data is of high quality. Comparing readings from the occlusion-release provocation showed that the MELSCI perfusion was significantly correlated (R=0.83) to the single point LDF perfusion, clearly outperforming perfusion estimations based on a single exposure time. We conclude that the MELSCI system provides blood flow images of enhanced quality, taking us one step closer to a system that accurately can monitor dynamic changes in skin perfusion over a large area in real-time.

Quality assessment of protein model-structures based on structural and functional similarities.

PubMed

Konopka, Bogumil M; Nebel, Jean-Christophe; Kotulska, Malgorzata

2012-09-21

Experimental determination of protein 3D structures is expensive, time consuming and sometimes impossible. A gap between number of protein structures deposited in the World Wide Protein Data Bank and the number of sequenced proteins constantly broadens. Computational modeling is deemed to be one of the ways to deal with the problem. Although protein 3D structure prediction is a difficult task, many tools are available. These tools can model it from a sequence or partial structural information, e.g. contact maps. Consequently, biologists have the ability to generate automatically a putative 3D structure model of any protein. However, the main issue becomes evaluation of the model quality, which is one of the most important challenges of structural biology. GOBA--Gene Ontology-Based Assessment is a novel Protein Model Quality Assessment Program. It estimates the compatibility between a model-structure and its expected function. GOBA is based on the assumption that a high quality model is expected to be structurally similar to proteins functionally similar to the prediction target. Whereas DALI is used to measure structure similarity, protein functional similarity is quantified using standardized and hierarchical description of proteins provided by Gene Ontology combined with Wang's algorithm for calculating semantic similarity. Two approaches are proposed to express the quality of protein model-structures. One is a single model quality assessment method, the other is its modification, which provides a relative measure of model quality. Exhaustive evaluation is performed on data sets of model-structures submitted to the CASP8 and CASP9 contests. The validation shows that the method is able to discriminate between good and bad model-structures. The best of tested GOBA scores achieved 0.74 and 0.8 as a mean Pearson correlation to the observed quality of models in our CASP8 and CASP9-based validation sets. GOBA also obtained the best result for two targets of CASP8, and one of CASP9, compared to the contest participants. Consequently, GOBA offers a novel single model quality assessment program that addresses the practical needs of biologists. In conjunction with other Model Quality Assessment Programs (MQAPs), it would prove useful for the evaluation of single protein models.

Health behaviours and quality of life in independently living South Australians aged 75 years or older.

PubMed

Amarasena, N; Keuskamp, D; Balasubramanian, M; Brennan, D S

2018-06-01

This study evaluated the associations between oral and general health behaviours, self-reported health and quality of life of adults aged 75 years or older living independently in South Australia. A cross sectional study based on a self-report mailed questionnaire was conducted in 590 independently living adults aged 75 years or older. Self-ratings of oral health and general health were assessed using single-item global ratings. Quality of life was measured using the Oral Health Impact Profile and the EuroQol instrument for health utility. The overall response rate was 78%. The current analyses were restricted to 354 dentate older adults. Increasing age and being female were negatively associated with EuroQol scores. Good self-rated oral and general health were more prevalent in participants with higher social status who also had lower oral health impact and higher EuroQol scores. Good self-rated oral and general health were less prevalent while oral health impact was greater in participants who ate few fruits, vegetables or dairy products. Self-rated health and quality of life were poor in older adults with inadequate fruit/vegetables/dairy intake and lower social status. These findings suggest that nutrition and socioeconomic factors may be important to the oral and general health of adults aged 75 years or older. © 2018 Australian Dental Association.

What’s the good of education on our overall quality of life? A simultaneous equation model of education and life satisfaction for Australia

PubMed Central

Powdthavee, Nattavudh; Lekfuangfu, Warn N.; Wooden, Mark

2017-01-01

Many economists and educators favour public support for education on the premise that education improves the overall quality of life of citizens. However, little is known about the different pathways through which education shapes people’s satisfaction with life overall. One reason for this is because previous studies have traditionally analysed the effect of education on life satisfaction using single-equation models that ignore interrelationships between different theoretical explanatory variables. In order to advance our understanding of how education may be related to overall quality of life, the current study estimates a structural equation model using nationally representative data for Australia to obtain the direct and indirect associations between education and life satisfaction through five different adult outcomes: income, employment, marriage, children, and health. Although we find the estimated direct (or net) effect of education on life satisfaction to be negative and statistically significant in Australia, the total indirect effect is positive, sizeable and statistically significant for both men and women. This implies that misleading conclusions regarding the influence of education on life satisfaction might be obtained if only single-equation models were used in the analysis. PMID:28713668

Quality of life and psychological health indicators in the national social life, health, and aging project.

PubMed

Shiovitz-Ezra, Sharon; Leitsch, Sara; Graber, Jessica; Karraker, Amelia

2009-11-01

The National Social Life, Health, and Aging Project (NSHAP) measures seven indicators of quality of life (QoL) and psychological health. The measures used for happiness, self-esteem, depression, and loneliness are well established in the literature. Conversely, measures of anxiety, stress, and self-reported emotional health were modified for their use in this unique project. The purpose of this paper is to provide (a) an overview of NSHAP's QoL assessment and (b) evidence for the adequacy of the modified measures. First, we examined the psychometric properties of the modified measures. Second, the established QoL measures were used to examine the concurrent validity of the modified measures. Finally, gender- and age-group differences were examined for each modified measure. The anxiety index exhibited good internal reliability and concurrent validity. Consistent with the literature, a single-factor structure best fit the data. Stress was satisfactory in terms of concurrent validity but with only fair internal consistency. Self-reported emotional health exhibited good concurrent validity and moderate external validity. The modified indices used in NSHAP tended to exhibit good internal reliability and concurrent validity. These measures can confidently be used in the exploration of QoL and psychological health in later life and its many correlates.

Quality of Life, Depression, Anxiety and Coping Strategies after Heart Transplantation

PubMed Central

Trevizan, Fulvio Bergamo; Miyazaki, Maria Cristina de Oliveira Santos; Silva, Yasmin Lima Witzel; Roque, Christiane Maia Waetman

2017-01-01

Introduction Heart transplantation is the therapeutic procedure indicated to increase the survival of patients with refractory heart failure. Improvement in overall functioning and quality of life are expected factors in the postoperative period. Objective To identify and evaluate mental disorders and symptoms, such as depression and anxiety, quality of life and coping strategies in the post-surgical situation of heart transplantation. Methods A cross-sectional, quantitative study with patients who have undergone heart transplantation. Participants answered to the Sociodemographic Questionnaire, Beck Depression Inventory (BDI-II), Beck Anxiety Inventory (BAI), MINI International Neuropsychiatric Interview, Escala Modos de Enfrentamento de Problemas (Ways of Coping Scale) (EMEP) and World Health Organization Quality of Life-BREF (WHOQOL-BREF). For data analysis, the significance level was considered P≤0.05. Results A total of 33 patients participated in the study. The BDI-II results indicated that 91% (n=30) of the patients presented a minimal level. In BAI, 94% (n=31) of the patients demonstrated minimal level of anxiety symptoms. WHOQOL-BREF showed a perception of quality of life considered good in all domains. The EMEP data have registered a problem-focused coping strategy. According to MINI, a single case of major depressive episode, current and recurrent was recorded. Conclusion Although most participants in the sample had symptoms of depression and anxiety, only one patient was identified with moderate symptoms in both domains. The most used strategy was coping focused on the problem. Patients have classified the perceptions of quality of life as 'good', pointing out satisfaction with their health. PMID:28832793

Quality of life and cosmetic result of single-port access endoscopic thyroidectomy via axillary approach in patients with papillary thyroid carcinoma.

PubMed

Huang, Jian-Kang; Ma, Ling; Song, Wen-Hua; Lu, Bang-Yu; Huang, Yu-Bin; Dong, Hui-Ming

2016-01-01

Endoscopic thyroidectomy for minimally invasive thyroid surgery has been widely applied in the past decade. The present study aimed to evaluate the effects of single-port access transaxillary totally endoscopic thyroidectomy on the postoperative outcomes and functional parameters, including quality of life and cosmetic result in patients with papillary thyroid carcinoma (PTC). Seventy-five patients with PTC who underwent endoscopic thyroidectomy via a single-port access transaxillary approach were included (experimental group). A total of 123 patients with PTC who were subjected to conventional open total thyroidectomy served as the control group. The health-related quality of life and cosmetic and satisfaction outcomes were assessed postoperatively. The mean operation time was significantly increased in the experimental group. The physiological functions and social functions in the two groups were remarkably augmented after 6 months of surgery. However, there was no significant difference in the scores of speech and taste between the two groups at the indicated time of 1 month and 6 months. In addition, the scores for appearance, satisfaction with appearance, role-physical, bodily pain, and general health in the experimental group were better than those in the control group at 1 month and 6 months after surgery. The single-port access transaxillary totally endoscopic thyroidectomy is safe and feasible for the treatment of patients with PTC. The subjects who underwent this technique have a good perception of their general state of health and are likely to participate in social activities. It is worthy of being clinically used for patients with PTC.

Single dose oral ibuprofen plus caffeine for acute postoperative pain in adults.

PubMed

Derry, Sheena; Wiffen, Philip J; Moore, R Andrew

2015-07-14

There is good evidence that combining two different analgesics in fixed doses in a single tablet can provide better pain relief in acute pain and headache than either drug alone, and that the drug-specific benefits are essentially additive. This appears to be broadly true in postoperative pain and migraine headache across a range of different drug combinations, and when tested in the same and different trials. Adding caffeine to analgesics also increases the number of people obtaining good pain relief. Combinations of ibuprofen and caffeine are available without prescription in some parts of the world. To assess the analgesic efficacy and adverse effects of a single oral dose of ibuprofen plus caffeine for moderate to severe postoperative pain, using methods that permit comparison with other analgesics evaluated in standardised trials using almost identical methods and outcomes. We searched the Cochrane Central Register of Controlled Trials (CENTRAL), MEDLINE, EMBASE, the Oxford Pain Relief Database, two clinical trial registries, and the reference lists of articles. The date of the most recent search was 1 February 2015. Randomised, double-blind, placebo- or active-controlled clinical trials of single dose oral ibuprofen plus caffeine for acute postoperative pain in adults. Two review authors independently considered trials for inclusion in the review, assessed risk of bias, and extracted data. We used the area under the pain relief versus time curve to derive the proportion of participants with at least 50% pain relief over six hours prescribed either ibuprofen plus caffeine or placebo. We calculated the risk ratio (RR) and number needed to treat to benefit (NNT). We used information on the use of rescue medication to calculate the proportion of participants requiring rescue medication and the weighted mean of the median time to use. We also collected information on adverse effects. We identified five randomised, double-blind studies with 1501 participants, but only four had been published and had relevant outcome data. These four studies were of high quality, although two of the studies were small.Both ibuprofen 200 mg + caffeine 100 mg and ibuprofen 100 mg + caffeine 100 mg produced significantly more participants than placebo who achieved at least 50% of maximum pain relief over six hours, and both doses significantly reduced remedication rates (moderate quality evidence). For at least 50% of maximum pain relief, the NNT was 2.1 (95% confidence interval 1.8 to 2.5) for ibuprofen 200 mg + caffeine 100 mg (four studies, 334 participants) and 2.4 (1.9 to 3.1) for ibuprofen 100 mg + caffeine 100 mg (two studies, 200 participants) (moderate quality evidence). These values were close to those predicted by published models for combination analgesics in acute pain, and were supported by low (good) NNT values for prevention of remedication.Adverse event rates were low, and no sensible analysis was possible. For ibuprofen 200 mg + caffeine 100 mg particularly, the low NNT value is among the lowest (best) values for analgesics in this pain model. The combination is not commonly available, but can be probably be achieved by taking a single 200 mg ibuprofen tablet with a cup of modestly strong coffee or caffeine tablets. In principle, this can deliver good analgesia at lower doses of ibuprofen.

Qualities of a psychiatric mentor: a quantitative Singaporean survey.

PubMed

Tor, Phern-Chern; Goh, Lee-Gan; Ang, Yong-Guan; Lim, Leslie; Winslow, Rasaiah-Munidasa; Ng, Beng-Yeong; Wong, Sze-Tai; Ng, Tse-Pin; Kia, Ee-Heok

2011-11-01

Psychiatric mentors are an important part of the new, seamless training program in Singapore. There is a need to assess the qualities of a good psychiatric mentor vis-à-vis those of a good psychiatrist. An anonymous survey was sent out to all psychiatry trainees and psychiatrists in Singapore to assess quantitatively the relative importance of 40 qualities for a good psychiatrist and a good mentor. The response rate was 48.7% (74/152). Factor analysis showed four themes among the qualities assessed (professional, personal values, relationship, academic-executive). A good mentor is defined by professional, relationship, and personal-values qualities. Mentors have significantly higher scores than psychiatrists for two themes (relationship and academic-executive). Being a good mentor, in Asia, means being a good psychiatrist first and foremost but also requires additional relationship and academic-executive skills. Mentors should be formally trained in these additional skills that were not part of the psychiatric curriculum.

A high quality voice coder with integrated echo canceller and voice activity detector for mobile satellite applications

NASA Technical Reports Server (NTRS)

Kondoz, A. M.; Evans, B. G.

1993-01-01

In the last decade, low bit rate speech coding research has received much attention resulting in newly developed, good quality, speech coders operating at as low as 4.8 Kb/s. Although speech quality at around 8 Kb/s is acceptable for a wide variety of applications, at 4.8 Kb/s more improvements in quality are necessary to make it acceptable to the majority of applications and users. In addition to the required low bit rate with acceptable speech quality, other facilities such as integrated digital echo cancellation and voice activity detection are now becoming necessary to provide a cost effective and compact solution. In this paper we describe a CELP speech coder with integrated echo canceller and a voice activity detector all of which have been implemented on a single DSP32C with 32 KBytes of SRAM. The quality of CELP coded speech has been improved significantly by a new codebook implementation which also simplifies the encoder/decoder complexity making room for the integration of a 64-tap echo canceller together with a voice activity detector.

Measuring the quality of life of people at the end of life: The McGill Quality of Life Questionnaire-Revised.

PubMed

Cohen, S Robin; Sawatzky, Richard; Russell, Lara B; Shahidi, Javad; Heyland, Daren K; Gadermann, Anne M

2017-02-01

The McGill Quality of Life Questionnaire has been widely used with people with life-threatening illnesses without modification since its publication in 1996. With use, areas for improvement have emerged; therefore, various minor modifications were tested over time. To revise the McGill Quality of Life Questionnaire (McGill Quality of Life Questionnaire-Revised) while maintaining or improving its psychometric properties and length, keeping it as close as possible to the McGill Quality of Life Questionnaire to enable reasonable comparison with existing McGill Quality of Life Questionnaire literature. Data sets from eight studies were used (four studies originally used to develop the McGill Quality of Life Questionnaire, two to develop new McGill Quality of Life Questionnaire versions, and two with unrelated purposes). The McGill Quality of Life Questionnaire-Revised was developed using analyses of measurement invariance, confirmatory factor analysis, and calculation of correlations with the McGill Quality of Life Questionnaire's global quality of life item. Data were from 1702 people with life-threatening illnesses recruited from acute and palliative care units, palliative home care services, and oncology and HIV/AIDS outpatient clinics. The McGill Quality of Life Questionnaire-Revised consists of 14 items (plus the global quality of life item). A new Physical subscale was created combining physical symptoms and physical well-being and a new item on physical functioning. The Existential subscale was reduced to four items. The revised Support subscale, renamed Social, focuses more on relationships. The Psychological subscale remains unchanged. Confirmatory factor analysis results provide support for the measurement structure of the McGill Quality of Life Questionnaire-Revised. The overall scale has good internal consistency reliability ( α = 0.94). The McGill Quality of Life Questionnaire-Revised improves on and can replace the McGill Quality of Life Questionnaire since it contains improved wording, a somewhat expanded repertoire of concepts with fewer items, and a single subscale for the physical domain, while retaining good psychometric properties.

MO-FG-204-02: Reference Image Selection in the Presence of Multiple Scan Realizations

DOE Office of Scientific and Technical Information (OSTI.GOV)

Ruan, D; Dou, T; Thomas, D

Purpose: Fusing information from multiple correlated realizations (e.g., 4DCT) can improve image quality. This process often involves ill-conditioned and asymmetric nonlinear registration and the proper selection of a reference image is important. This work proposes to examine post-registration variation indirectly for such selection, and develops further insights to reduce the number of cross-registrations needed. Methods: We consider each individual scan as a noisy point in the vicinity of an image manifold, related by motion. Nonrigid registration “transports” a scan along the manifold to the reference neighborhood, and the residual is a surrogate for local variation. To test this conjecture, 10more » thoracic scans from the same session were reconstructed from a recently developed low-dose helical 4DCT protocol. Pairwise registration was repeated bi-directionally (81 times) and fusion was performed with each candidate reference. The fused image quality was assessed with SNR and CNR. Registration residuals in SSD, harmonic energy, and deformation Jacobian behavior were examined. The semi-symmetry is further utilized to reduce the number of registration needed. Results: The comparison of image quality between single image and fused ones identified reduction of local intensity variance as the major contributor of image quality, boosting SNR and CNR by 5 to 7 folds. This observation further suggests the criticality of good agreement across post-registration images. Triangle inequality on the SSD metric provides a proficient upper-bound and surrogate on such disagreement. Empirical observation also confirms that fused images with high residual SSD have lower SNR and CNR than the ones with low or intermediate SSDs. Registration SSD is structurally close enough to symmetry for reduced computation. Conclusion: Registration residual is shown to be a good predictor of post-fusion image quality and can be used to identify good reference centers. Semi-symmetry of the registration residual further reduces computation cost. Supported by in part by NIH R01 CA096679.« less

Single layer centrifugation-selected boar spermatozoa are capable of fertilization in vitro

PubMed Central

2013-01-01

Background Good quality spermatozoa are important to achieve fertilization, viable embryos and offspring. Single Layer Centrifugation (SLC) through a colloid (Androcoll-P) selects good quality spermatozoa. However, it has not been established previously whether porcine spermatozoa selected by this method maintain their fertility. Methods The semen was prepared either by SLC or by standard centrifugation (control) and used for in vitro fertilization (IVF) at oocyte:spermatozoa ratios of 1:50; 1:100 and 1:300 (or 4 x 103, 8 x 103 and 24 x 103 spermatozoa/ml) to evaluate their subsequent ability to generate blastocysts. In addition, sperm motility was assessed by computer assisted sperm motility analysis. Results Total and progressive motility were significantly higher in sperm samples prepared by SLC compared to uncentrifuged samples. Sperm binding ability, polyspermy, cleavage and blastocyst rates were affected by the oocyte:sperm ratio, but not by sperm treatment. Conclusion The use of SLC does not adversely affect the in vitro fertilizing and embryo-generating ability of the selected spermatozoa compared to their unselected counterparts, but further modifications in the IVF conditions would be needed to improve the monospermy in IVF systems. Since SLC did not appear to have a negative effect on sperm fertilizing ability, and may in fact select for spermatozoa with a greater potential for fertilization, an in vivo trial to determine the usefulness of this sperm preparation technique prior to artificial insemination is warranted. PMID:23497680

An investigation of turbulence structure in a low-Reynolds-number incompressible turbulent boundary

NASA Technical Reports Server (NTRS)

White, B. R.; Strataridakis, C. J.

1987-01-01

An existing high turbulence intensity level (5%) atmospheric boundary-layer wind tunnel has been successfully converted to a relatively low level turbulence (0.3%) wind tunnel through extensive modification, testing, and calibration. A splitter plate was designed, built, and installed into the wind-tunnel facility to create thick, mature, two-dimensional turbulent boundary layer flow at zero pressure gradient. Single and cross hot-wire measurements show turbulent boundary layer characteristics of good quality with unusually large physical size, i.e., viscous sublayer of the order of 1 mm high. These confirm the potential ability of the tunnel to be utilized for future high-quality near-wall turbulent boundary layer measurements. It compares very favorably with many low turbulence research tunnels.

Is cryopreservation of embryos a legitimate surrogate marker of embryo quality in studies of assisted reproductive technology conducted using national databases?

PubMed

Stern, Judy E; Lieberman, Ellice S; Macaluso, Maurizio; Racowsky, Catherine

2012-04-01

To investigate whether cryopreservation of supernumerary embryos is a good surrogate for embryo quality. Retrospective study of 6,859 assisted reproductive technology (ART) cycles from women aged <35 years with two fresh day 3 embryos transferred. National Society for Assisted Reproductive Technology Clinic Outcome Reporting System data from 2006-2008. Women undergoing ART. None. Embryo quality (good, fair, or poor), cell number, and live births were compared for cycles with and without cryopreservation, using χ(2) to evaluate statistical significance. The association of freezing with embryo quality was examined using multiple logistic regression after adjusting for confounders (patient age, oocyte yield, intracytoplasmic sperm injection [ICSI], assisted hatching, male factor infertility). Cycles with cryopreservation were more likely to have two embryos of good quality transferred (81.3% vs. 48.5%) and had more 8-cell embryos transferred (76.0% vs. 50.1%). Relative to cycles with two good embryos (good-good), the adjusted odds ratios (OR) for cryopreservation were: good-fair (OR = 0.301, 95% confidence interval [CI] = 0.257-0.354), fair-fair (OR = 0.308, 95% CI = 0.258-0.367), and any poor (OR = 0.058, 95% CI = 0.040-0.083). The live birth rate was 52.4% for cycles with freezing and 40.6% for cycles without. Embryo quality and cell number were both associated with embryo cryopreservation. However, although cryopreservation was a strong marker for good quality, not having cryopreservation did not reliably indicate poor quality, as almost half of those cycles had two good quality embryos. Copyright © 2012 American Society for Reproductive Medicine. Published by Elsevier Inc. All rights reserved.

Solution Growth of a Novel Nonlinear Optical Material: L-Histidine Tetrafluoroborate

NASA Technical Reports Server (NTRS)

Aggarwal, M. D.; Choi, J.; Wang, W. S.; Bhat, K.; Lal, R. B.; Shields, Angela D.; Penn, Benjamin G.; Frazier, Donald O.

1998-01-01

Single crystals of L-Histidine tetrafluoroborate (L-HFB), a semiorganic nonlinear optical (NLO) material have been successfully grown by the temperature lowering and evaporation methods in our laboratory. Solubility curves of L-HFB have been determined in different solvents, such as water, ethanol and acetone. The solubility of L-HFB is very low in acetone, and ethanol, therefore, it is not feasible to grow L-HFB single crystals using these solvents. Good quality single crystals of a novel nonlinear optical material L-HFB have been grown from aqueous solution. Effects of seed orientation on morphologies of L-HFB crystals were studied. The advantages and disadvantage of both the evaporation and the temperature lowering techniques are compared. The single crystals in size 20 x 20 x 10 cubic mm were grown with deionized water as solvent in two weeks with an approximate growth rate of 1.4mm/day. The transmission range for these crystals has been found to be from 250 nm to 1500 nm.

Effect of L-Valine on the growth and characterization of Sodium Acid Phthalate (SAP) single crystals.

PubMed

Nirmala, L Ruby; Thomas Joseph Prakash, J

2013-06-01

Undoped and amino acid doped good quality single crystals of Sodium Acid Phthalate crystals (SAP) were grown by slow evaporation solution growth technique which are semiorganic in nature. The effect of amino acid (L-Valine) dopant on the growth and the properties of SAP single crystal was investigated. The single crystal X-ray diffraction studies and FT-IR studies were carried out to identify the crystal structure and the presence of functional groups in undoped and L-Valine doped SAP crystals. The transparent nature of the grown crystal was observed using UV-Visible spectrum. The thermal decomposition of the doped SAP crystals was investigated by thermo gravimetric analysis (TGA) and differential thermal analysis (DTA). The enhancement in the NLO property of the undoped and L-Valine doped SAP crystals using KDP crystal as a reference was studied using SHG measurements. Vickers micro hardness measurements are used for the study of mechanical strength of the grown crystals. Copyright © 2013 Elsevier B.V. All rights reserved.

[The principle and application of the single-molecule real-time sequencing technology].

PubMed

Yanhu, Liu; Lu, Wang; Li, Yu

2015-03-01

Last decade witnessed the explosive development of the third-generation sequencing strategy, including single-molecule real-time sequencing (SMRT), true single-molecule sequencing (tSMSTM) and the single-molecule nanopore DNA sequencing. In this review, we summarize the principle, performance and application of the SMRT sequencing technology. Compared with the traditional Sanger method and the next-generation sequencing (NGS) technologies, the SMRT approach has several advantages, including long read length, high speed, PCR-free and the capability of direct detection of epigenetic modifications. However, the disadvantage of its low accuracy, most of which resulted from insertions and deletions, is also notable. So, the raw sequence data need to be corrected before assembly. Up to now, the SMRT is a good fit for applications in the de novo genomic sequencing and the high-quality assemblies of small genomes. In the future, it is expected to play an important role in epigenetics, transcriptomic sequencing, and assemblies of large genomes.

Studies on 2-amino-5-nitropyridinium nitrate (2A5NPN): A semi-organic third order nonlinear optical single crystal

DOE Office of Scientific and Technical Information (OSTI.GOV)

Sivasubramani, V.; Pandian, Muthu Senthil, E-mail: senthilpandianm@ssn.edu.in; Ramasamy, P.

2016-05-23

2-amino-5-nitropyridinium nitrate (2A5NPN) is a semi-organic nonlinear optical crystal and optically good quality 2A5NPN single crystals were successfully grown by slow evaporation solution growth technique (SEST) at ambient temperature. The crystallographic structure of the grown crystal was determined by single crystal X-Ray diffraction analysis and it belongs to Monoclinic crystal system with centro symmetric crystalline nature. The crystallinity of the grown crystal was confirmed by powder X-ray diffraction analysis. The other physical properties of grown crystals are also characterized using TG-DTA, UV-Visible NIR, chemical etching, photoconductivity and Z-scan measurements. The Z-scan method reveals that the 2A5NPN crystal possesses multi photonmore » absorption behaviour and the significantly higher third order susceptibility and it is a promising potential NLO material.« less

Bulk growth of <001> organic nonlinear optical (NLO) L-arginine 4-nitrophenolate 4-nitrophenol dihydrate (LAPP) single crystals by SR method

DOE Office of Scientific and Technical Information (OSTI.GOV)

Pandian, Muthu Senthil, E-mail: senthilpandianm@ssn.edu.in; Sivasubramani, V.; Ramasamy, P.

2015-06-24

A transparent uniaxial L-arginine 4-nitrophenolate 4-nitrophenol dehydrate (LAPP) single crystal having dimension of 20 mm diameter and 45 mm length was grown by Sankaranarayanan-Ramasamy (SR) method with a growth rate of 1 mm per day. Using an identical solution the conventional crystal grown to a dimension of 8×5×5 mm{sup 3} was obtained over a period of 30 days. The crystal structure has been confirmed by single crystal X-ray diffraction measurement. The crystalline perfection of LAPP crystals grown by slow evaporation solution technique (SEST) and SR method were characterized using Vickers microhardness, UV-Vis NIR, chemical etching, dark and photo current measurements. The above study indicatesmore » that the crystal quality of the Sankaranarayanan-Ramasamy (SR) method grown LAPP is good compared to the conventional method grown crystal.« less

Reflexion on linear regression trip production modelling method for ensuring good model quality

NASA Astrophysics Data System (ADS)

Suprayitno, Hitapriya; Ratnasari, Vita

2017-11-01

Transport Modelling is important. For certain cases, the conventional model still has to be used, in which having a good trip production model is capital. A good model can only be obtained from a good sample. Two of the basic principles of a good sampling is having a sample capable to represent the population characteristics and capable to produce an acceptable error at a certain confidence level. It seems that this principle is not yet quite understood and used in trip production modeling. Therefore, investigating the Trip Production Modelling practice in Indonesia and try to formulate a better modeling method for ensuring the Model Quality is necessary. This research result is presented as follows. Statistics knows a method to calculate span of prediction value at a certain confidence level for linear regression, which is called Confidence Interval of Predicted Value. The common modeling practice uses R2 as the principal quality measure, the sampling practice varies and not always conform to the sampling principles. An experiment indicates that small sample is already capable to give excellent R2 value and sample composition can significantly change the model. Hence, good R2 value, in fact, does not always mean good model quality. These lead to three basic ideas for ensuring good model quality, i.e. reformulating quality measure, calculation procedure, and sampling method. A quality measure is defined as having a good R2 value and a good Confidence Interval of Predicted Value. Calculation procedure must incorporate statistical calculation method and appropriate statistical tests needed. A good sampling method must incorporate random well distributed stratified sampling with a certain minimum number of samples. These three ideas need to be more developed and tested.

Analysis of pollen load based on color, physicochemical composition and botanical source.

PubMed

Modro, Anna F H; Silva, Izabel C; Luz, Cynthia F P; Message, Dejair

2009-06-01

Pollen load samples from 10 hives of Apis mellifera (L.) were analyzed based on their physicochemical composition and botanical source, considering color as a parameter for quality control. In seven samples it was possible to establish the occurrence of more than 80% of a single pollen type, characterizing them as unifloral but with protein content variation. One of the samples was exclusively composed of saprophytic fungi (Cladosporium sp.). Comparing the mean results of the fungi loads with those of the nutritional components of pollen load, the former presented higher protein, mineral matter and dry matter and lower organic matter, ethereal extract and total carbohydrate values. The monochromatic samples met the physicochemical specifications regulating pollen load quality. The results showed that homogeneous coloration of the pollen load was not found to be a good indication of unifloral pollen, confirming the importance of physicochemical analysis and melissopalynological analysis for characterization of the quality of commercial pollen load.

[Faecal occult blood test for colorectal cancer screening: high quality for a good price].

PubMed

van Veldhuizen, Harriët; Bonfrer, J M G Hans; Kuipers, Ernst J

2013-01-01

The Dutch National Institute for Public Health and the Environment (RIVM) awarded the immunochemical faecal occult blood test (IFOBT) to FOB Gold of Sentinel following a European call for tenders. The contract-awarding procedure included the application of quality knock-out criteria, which were met by two suppliers. The decisive factor was the best price/quality ratio. A recent review indicated that, at present, no single IFOBT is better than any other. The decision to opt for a test manufactured by a different supplier than was used in the previous screening pilots made it necessary to re-determine the cut-off value. This value has now been set (88 ng/ml) and is confirmed by a laboratory test. Colonoscopy-related capacity planning, as well as its diagnostic yield, depends on numerous factors; therefore, the RIVM is currently monitoring the referral percentage and number of adenomas detected and is collaborating on quality terms. Any necessary adjustments are to be made during the introduction of the screening test.

Cross-Cultural Validation of the Quality of Life in Hand Eczema Questionnaire (QOLHEQ).

PubMed

Ofenloch, Robert F; Oosterhaven, Jart A F; Susitaival, Päivikki; Svensson, Åke; Weisshaar, Elke; Minamoto, Keiko; Onder, Meltem; Schuttelaar, Marie Louise A; Bulbul Baskan, Emel; Diepgen, Thomas L; Apfelbacher, Christian

2017-07-01

The Quality of Life in Hand Eczema Questionnaire (QOLHEQ) is the only instrument assessing disease-specific health-related quality of life in patients with hand eczema. It is available in eight language versions. In this study we assessed if the items of different language versions of the QOLHEQ yield comparable values across countries. An international multicenter study was conducted with participating centers in Finland, Germany, Japan, The Netherlands, Sweden, and Turkey. Methods of item response theory were applied to each subscale to assess differential item functioning for items among countries. Overall, 662 hand eczema patients were recruited into the study. Single items were removed or split according to the item response theory model by country to resolve differential item functioning. After this adjustment, none of the four subscales of the QOLHEQ showed significant misfit to the item response theory model (P < 0.01), and a Person Separation Index of greater than 0.7 showed good internal consistency for each subscale. By adapting the scoring of the QOLHEQ using the methods of item response theory, it was possible to obtain QOLHEQ values that are comparable across countries. Cross-cultural variations in the interpretation of single items were resolved. The QOLHEQ is now ready to be used in international studies assessing the health-related quality of life impact of hand eczema. Copyright © 2017 The Authors. Published by Elsevier Inc. All rights reserved.

Multi Objective Optimization of Yarn Quality and Fibre Quality Using Evolutionary Algorithm

NASA Astrophysics Data System (ADS)

Ghosh, Anindya; Das, Subhasis; Banerjee, Debamalya

2013-03-01

The quality and cost of resulting yarn play a significant role to determine its end application. The challenging task of any spinner lies in producing a good quality yarn with added cost benefit. The present work does a multi-objective optimization on two objectives, viz. maximization of cotton yarn strength and minimization of raw material quality. The first objective function has been formulated based on the artificial neural network input-output relation between cotton fibre properties and yarn strength. The second objective function is formulated with the well known regression equation of spinning consistency index. It is obvious that these two objectives are conflicting in nature i.e. not a single combination of cotton fibre parameters does exist which produce maximum yarn strength and minimum cotton fibre quality simultaneously. Therefore, it has several optimal solutions from which a trade-off is needed depending upon the requirement of user. In this work, the optimal solutions are obtained with an elitist multi-objective evolutionary algorithm based on Non-dominated Sorting Genetic Algorithm II (NSGA-II). These optimum solutions may lead to the efficient exploitation of raw materials to produce better quality yarns at low costs.

Vagus nerve stimulator implantation for epilepsy in a paediatric hospital: outcomes and effect on quality of life.

PubMed

Ulate-Campos, A; Cean-Cabrera, L; Petanas-Argemi, J; García-Fructuoso, G; Aparicio, J; López-Sala, A; Palacio-Navarro, A; Mas, M J; Muchart, J; Rebollo, M; Sanmartí, F X

2015-10-01

Epilepsy, which is present in 0.5% to 1% of the paediatric population, is one of the most frequent childhood neurological disorders. Approximately 20% to 30% of these cases will be drug-resistant. The objective of this study is to describe the impact of vagal nerve stimulation (VNS) on seizures and quality of life in a sample of 30 patients. Descriptive, retrospective study of all patients with a VNS device implanted between 2008 and 2013 in a single paediatric hospital, based on patients' medical records. Quality of life was assessed using the Spanish scale for quality of life in children with epilepsy, completed by means of a telephone interview. We describe a population of 19 boys (64%) and 11 girls (36%) with a mean age at seizure onset of 21 months (1-144 months). The mean age of VNS implantation was 11.89 years. Follow-up periods ranged from 6 to 36 months. Mean reduction in seizures at 6 months was 38%, with a reduction of 43% at 12 months, 42% at 24 months, and 54% at 36 months. At least half of all patients were classified as responders. According to the quality of life scale, 54% of the families rated the effect of VNS as either very good or good while 39% rated it as fair. VNS is a safe palliative treatment that is generally well tolerated. It is partially effective for controlling drug-resistant epilepsy and exerts a positive effect on quality of life. Copyright © 2014 Sociedad Española de Neurología. Published by Elsevier España, S.L.U. All rights reserved.

Optical Spectra of the Jaynes-Cummings Ladder

DOE Office of Scientific and Technical Information (OSTI.GOV)

Laussy, Fabrice P.; Valle, Elena del

2009-06-29

We explore how the Jaynes-Cummings ladder transpires in the emitted spectra of a two-level system in strong coupling with a single mode of light. We focus on the case of very strong coupling, that would be achieved with systems of exceedingly good quality (very long lifetimes for both the emitter and the cavity). We focus on the incoherent regime of excitation, that is realized with semiconductors quantum dots in microcavities, and discuss how reasonable is the understanding of the systems in terms of transitions between dressed states of the Jaynes-Cummings Hamiltonian.

DOE Office of Scientific and Technical Information (OSTI.GOV)

He Liang; Xiu Faxian; Huang Guan

In this paper, we report the epitaxial growth of Bi{sub 2}Se{sub 3} thin films on Si (111) substrate, using molecular beam epitaxy (MBE). We show that the as-grown samples have good crystalline quality, and their surfaces exhibit terracelike quintuple layers. Angel-resolved photoemission experiments demonstrate single-Dirac-conelike surface states. These results combined with the temperature- and thickness-dependent magneto-transport measurements, suggest the presence of a shallow impurity band. Below a critical temperature of {approx}100K, the surface states of a 7 nm thick film contribute up to 50% of the total conduction.

Crystal growth and electronic structure of low-temperature phase SrMgF{sub 4}

DOE Office of Scientific and Technical Information (OSTI.GOV)

Atuchin, Victor V.; Functional Electronics Laboratory, Tomsk State University, Tomsk 634050; Laboratory of Semiconductor and Dielectric Materials, Novosibirsk State University, Novosibirsk 630090

2016-04-15

Using the vertical Bridgman method, the single crystal of low temperature phase SrMgF{sub 4} is obtained. The crystal is in a very good optical quality with the size of 10×7×5 mm{sup 3}. Detailed photoemission spectra of the element core levels are determined by a monochromatic AlKa (1486.6 eV) X-ray source. Moreover, the first-principles calculations are performed to investigate the electronic structure of SrMgF{sub 4}. A good agreement between experimental and calculated results is achieved. It is demonstrated that almost all the electronic orbitals are strongly localized and the hybridization with the others is very small, but the Mg–F bonds covalencymore » is relatively stronger than that of Sr–F bonds. - Graphical abstract: Large size of low-temperature phase SrMgF{sub 4} crystal was obtained (right) and its electronic structure was investigated by X-ray photoelectron spectroscopy and first-principles calculation (left). - Highlights: • Large size single crystal of low-temperature phase SrMgF{sub 4} is obtained. • Electronic structure of SrMgF{sub 4} is measured by X-ray photoelectron spectroscopy. • Partial densities of states are determined by first-principles calculation. • Good agreement between experimental and calculated results is achieved. • Strong ionic characteristics of chemical bonds are exhibited in SrMgF{sub 4}.« less

Rocking curve imaging of high quality sapphire crystals in backscattering geometry

DOE PAGES

Jafari, A.; European Synchrotron Radiation Facility; Univ. of Liege,; ...

2017-01-23

Here, we report on the characterization of high quality sapphire single crystals suitable for high-resolution X-ray optics at high energy. Investigations using rocking curve imaging reveal the crystals to be of uniformly good quality at the level of ~10 -4 in lattice parameter variations, deltad/d. But, investigations using backscattering rocking curve imaging with lattice spacing resolution of deltad/d ~ 5.10 -8 shows very diverse quality maps for all crystals. Our results highlight nearly ideal areas with edge length of 0.2-0.5 mm in most crystals, but a comparison of the back re ection peak positions shows that even neighboring ideal areasmore » exhibit a relative difference in the lattice parameters on the order of deltad/d = 10-20.10 -8; this is several times larger than the rocking curve width. Furthermore, the stress-strain analysis suggests that an extremely stringent limit on the strain at a level of ~100 kPa in the growth process is required in order to produce crystals with large areas of the quality required for X-ray optics at high energy.« less

Validation of the Quality-of-Life Questionnaire of the European Foundation for Osteoporosis (QUALEFFO-26) in Korean population.

PubMed

Lee, Jung Sub; Shin, Jong Ki; Son, Seung Min; An, Sung Jin; Kang, Sung Shik

2014-07-01

We aimed to evaluate the reliability and validity of the adapted Korean version of the Quality-of-Life Questionnaire of the European Foundation for Osteoporosis (QUALEFFO-26). Translation/retranslation of the English version of QUALEFFO was conducted, and all steps of the cross-cultural adaptation process were performed. The Korean version of the visual analog scale measure of pain, QUALEFFO-26 and the previously validated Short Form-36 (SF-36) were mailed to 162 consecutive patients with osteoporosis. Factor analysis and reliability assessment by kappa statistics of agreement for each item, the intraclass correlation coefficient and Cronbach's α were conducted. Construct validity was also evaluated by comparing the responses of QUALEFFO-26 with the responses of SF-36 using Pearson's correlation coefficient. Factor analysis extracted 3 factors. All items had a kappa statistics of agreement greater than 0.6. The QUALEFFO-26 showed good test/retest reliability (QUALEFFO-26: 0.8271). Internal consistency of Cronbach's α was found to be very good (QUALEFFO-26: 0.873). The Korean version of QUALEFFO-26 showed good significant correlation with SF-36 total score and with single SF-36 domains scores. The adapted Korean version of the QUALEFFO-26 was successfully translated and showed acceptable measurement properties and, as such, is considered suitable for outcome assessments in the Korean-speaking patients with osteoporosis.

End-anchored polymers in good solvents from the single chain limit to high anchoring densities.

PubMed

Whitmore, Mark D; Grest, Gary S; Douglas, Jack F; Kent, Michael S; Suo, Tongchuan

2016-11-07

An increasing number of applications utilize grafted polymer layers to alter the interfacial properties of solid substrates, motivating refinement in our theoretical understanding of such layers. To assess existing theoretical models of them, we have investigated end-anchored polymer layers over a wide range of grafting densities, σ, ranging from a single chain to high anchoring density limits, chain lengths ranging over two orders of magnitude, for very good and marginally good solvent conditions. We compare Monte Carlo and molecular dynamics simulations, numerical self-consistent field calculations, and experimental measurements of the average layer thickness, h, with renormalization group theory, the Alexander-de Gennes mushroom theory, and the classical brush theory. Our simulations clearly indicate that appreciable inter-chain interactions exist at all simulated areal anchoring densities so that there is no mushroom regime in which the layer thickness is independent of σ. Moreover, we find that there is no high coverage regime in which h follows the predicted scaling, h ∼ Nσ 1/3 , for classical polymer brushes either. Given that no completely adequate analytic theory seems to exist that spans wide ranges of N and σ, we applied scaling arguments for h as a function of a suitably defined reduced anchoring density, defined in terms of the solution radius of gyration of the polymer chains and N. We find that such a scaling approach enables a smooth, unified description of h in very good solvents over the full range of anchoring density and chain lengths, although this type of data reduction does not apply to marginal solvent quality conditions.

Perceptual quality prediction on authentically distorted images using a bag of features approach

PubMed Central

Ghadiyaram, Deepti; Bovik, Alan C.

2017-01-01

Current top-performing blind perceptual image quality prediction models are generally trained on legacy databases of human quality opinion scores on synthetically distorted images. Therefore, they learn image features that effectively predict human visual quality judgments of inauthentic and usually isolated (single) distortions. However, real-world images usually contain complex composite mixtures of multiple distortions. We study the perceptually relevant natural scene statistics of such authentically distorted images in different color spaces and transform domains. We propose a “bag of feature maps” approach that avoids assumptions about the type of distortion(s) contained in an image and instead focuses on capturing consistencies—or departures therefrom—of the statistics of real-world images. Using a large database of authentically distorted images, human opinions of them, and bags of features computed on them, we train a regressor to conduct image quality prediction. We demonstrate the competence of the features toward improving automatic perceptual quality prediction by testing a learned algorithm using them on a benchmark legacy database as well as on a newly introduced distortion-realistic resource called the LIVE In the Wild Image Quality Challenge Database. We extensively evaluate the perceptual quality prediction model and algorithm and show that it is able to achieve good-quality prediction power that is better than other leading models. PMID:28129417

The influence of the attachment type and implant number supporting mandibular overdentures on stress distribution: an in vitro study, part I.

PubMed

Arat Bilhan, Selda; Bilhan, Hakan; Bozdag, Ergun; Sunbuloglu, Emin; Baykasoglu, Cengiz; Kutay, Omer

2013-02-01

The main goal of this study was to compare the stress distribution of mandibular overdentures (OVD) with different numbers of supporting implants and single versus splinted attachment types. Four different biting situations were simulated for the 2-, 3-, and 4-implant retentive anchor as well as bar attachment OVDs on a formalin-fixed cadaver mandible, and strains were recorded under vertical loading of 100 N. The calculated von Mises values from measured strains in all measurement sites and loading conditions for nonsplinted attachments (retentive anchor) were higher than splinted (bar) attachments. It may be concluded that in cases with low quality and quantity of bone, the increase in number of implants and the use of a splinted attachment should be preferred to reduce forces emerging around the implants during function. The use of 2 single attachments in cases with good bone quality and ideal size implants still seems to be a safe and sufficient solution for the treatment of mandibular edentulism with OVDs.

Growth, structural, optical, thermal and laser damage threshold studies of an organic single crystal: 1,3,5 – triphenylbenzene (TPB)

DOE Office of Scientific and Technical Information (OSTI.GOV)

Raja, R. Subramaniyan; Babu, G. Anandha; Ramasamy, P., E-mail: E-mail-ramasamyp@ssn.edu.in

2016-05-23

Good quality single crystals of pure hydrocarbon 1,3,5-Triphenylbenzene (TPB) have been successfully grown using toluene as a solvent using controlled slow cooling solution growth technique. TPB crystallizes in orthorhombic structure with the space group Pna2{sub 1}. The structural perfection of the grown crystal has been analysed by high resolution X-ray diffraction measurements. The range and percentage of the optical transmission are ascertained by recording the UV-vis spectrum. Thermo gravimetric analysis (TGA) and differential thermal analysis (DTA) were used to study its thermal properties. Powder second harmonic generation studies were carried out to explore its NLO properties. Laser damage threshold valuemore » has been determined using Nd:YAG laser operating at 1064 nm.« less

Site-controlled quantum dots fabricated using an atomic-force microscope assisted technique

PubMed Central

Usuki, T; Ohshima, T; Sakuma, Y; Kawabe, M; Okada, Y; Takemoto, K; Miyazawa, T; Hirose, S; Nakata, Y; Takatsu, M; Yokoyama, N

2006-01-01

An atomic-force microscope assisted technique is developed to control the position and size of self-assembled semiconductor quantum dots (QDs). Presently, the site precision is as good as ± 1.5 nm and the size fluctuation is within ± 5% with the minimum controllable lateral diameter of 20 nm. With the ability of producing tightly packed and differently sized QDs, sophisticated QD arrays can be controllably fabricated for the application in quantum computing. The optical quality of such site-controlled QDs is found comparable to some conventionally self-assembled semiconductor QDs. The single dot photoluminescence of site-controlled InAs/InP QDs is studied in detail, presenting the prospect to utilize them in quantum communication as precisely controlled single photon emitters working at telecommunication bands.

Qualities of a good Singaporean psychiatrist: Qualitative differences between psychiatrists and patients.

PubMed

Tor, Phern-Chern; Tan, Jacinta O A

2015-06-01

Pilot studies in Singapore established four themes (personal values, professional, relationship, academic-executive) relating to the qualities of a good psychiatrist, and suggested potential differences of opinion between patients and psychiatrists. We sought to explore differences between patients and psychiatrists regarding the qualities of a good psychiatrist. Qualitative analysis of interviews using a modified grounded theory approach with 21 voluntary psychiatric inpatients and 18 psychiatrists. One hundred thirty-one separate qualities emerged from the data. The qualities of a good psychiatrist were viewed in the context of motivations, functions, methods, and results obtained, mirroring the themes established in the pilot studies. Patients and psychiatrists mostly concurred on the qualities of a good psychiatrist, with 62.6% of the qualities emerging from both groups. However significant differences existed. Patient-specific qualities included proof of altruistic motives, diligence, clinical competence, and positive results. What the psychiatrist represented to patients in relation to gender, culture, and clinical prestige also mattered to patients. Psychiatrist-specific qualities related to societal (e.g. public protection) and professional concerns (e.g. boundary issues). The results of this study demonstrate that patients and psychiatrists have different views about the qualities of a good psychiatrist. Patients may expect proof of care, diligence, and competence from the psychiatrist, along with positive results. In addition, psychiatrists should be mindful of what they represent to patients and how that can impact the doctor-patient relationship. © 2014 Wiley Publishing Asia Pty Ltd.

Quality assessment of protein model-structures based on structural and functional similarities

PubMed Central

2012-01-01

Background Experimental determination of protein 3D structures is expensive, time consuming and sometimes impossible. A gap between number of protein structures deposited in the World Wide Protein Data Bank and the number of sequenced proteins constantly broadens. Computational modeling is deemed to be one of the ways to deal with the problem. Although protein 3D structure prediction is a difficult task, many tools are available. These tools can model it from a sequence or partial structural information, e.g. contact maps. Consequently, biologists have the ability to generate automatically a putative 3D structure model of any protein. However, the main issue becomes evaluation of the model quality, which is one of the most important challenges of structural biology. Results GOBA - Gene Ontology-Based Assessment is a novel Protein Model Quality Assessment Program. It estimates the compatibility between a model-structure and its expected function. GOBA is based on the assumption that a high quality model is expected to be structurally similar to proteins functionally similar to the prediction target. Whereas DALI is used to measure structure similarity, protein functional similarity is quantified using standardized and hierarchical description of proteins provided by Gene Ontology combined with Wang's algorithm for calculating semantic similarity. Two approaches are proposed to express the quality of protein model-structures. One is a single model quality assessment method, the other is its modification, which provides a relative measure of model quality. Exhaustive evaluation is performed on data sets of model-structures submitted to the CASP8 and CASP9 contests. Conclusions The validation shows that the method is able to discriminate between good and bad model-structures. The best of tested GOBA scores achieved 0.74 and 0.8 as a mean Pearson correlation to the observed quality of models in our CASP8 and CASP9-based validation sets. GOBA also obtained the best result for two targets of CASP8, and one of CASP9, compared to the contest participants. Consequently, GOBA offers a novel single model quality assessment program that addresses the practical needs of biologists. In conjunction with other Model Quality Assessment Programs (MQAPs), it would prove useful for the evaluation of single protein models. PMID:22998498

Duration of treatment for asymptomatic bacteriuria during pregnancy.

PubMed

Widmer, Mariana; Lopez, Ivana; Gülmezoglu, A Metin; Mignini, Luciano; Roganti, Ariel

2015-11-11

A previous Cochrane systematic review has shown that antibiotic drug treatment of asymptomatic bacteriuria in pregnant women substantially decreases the risk of pyelonephritis and reduces the risk of preterm delivery. However, it is not clear whether single-dose therapy is as effective as longer conventional antibiotic treatment. To assess the effects of different durations of treatment for asymptomatic bacteriuria in pregnancy. We searched the Cochrane Pregnancy and Childbirth Group's Trials Register (31 August 2015) and reference lists of identified articles. Randomized and quasi-randomized trials comparing antimicrobial therapeutic regimens that differed in duration (particularly comparing single dose with longer duration regimens) in pregnant women diagnosed with asymptomatic bacteriuria. Two review authors independently assessed trials for inclusion and risk of bias, extracted data and checked them for accuracy. We assessed the quality of the evidence using the GRADE approach. We included 13 studies, involving 1622 women. All were comparisons of single-dose treatment with short-course (four- to seven-day) treatments. The risk of bias of trials included in this review was largely unclear, and most trials were at high risk of performance bias. The quality of the evidence was assessed using the GRADE approach. When the any antibiotic agent was used, the 'no cure' rate for asymptomatic bacteriuria in pregnant women was slightly lower for the short-course treatment over the single-dose treatment, although there was evidence of statistical heterogeneity (average risk ratio (RR) 1.28, 95% confidence interval (CI) 0.87 to 1.88; women = 1502, studies = 13; I² = 56%; very low quality evidence). Data from only good quality trials also showed better cure rates with short (four- to seven-day) regimens of the same microbial agent (average RR 1.72, 95% CI 1.27 to 2.33; women = 803, studies = two; I² = 0%; high quality evidence). There was no clear difference in the recurrence of asymptomatic bacteriuria rate between treatment and control groups, whether the same or different microbial agents were used (RR 1.13, 95% CI 0.77 to 1.66; 445 women studies = eight; I² = 0%; very low quality evidence). Differences were detected for low birthweight babies, favoring a short course (four- to seven-day treatment) of the same microbial agent, although the data come from a single trial (RR 1.65, 95% CI 1.06 to 2.57; 714 women; high quality evidence), but no differences were observed for preterm delivery (RR 1.17, 95% CI 0.77 to 1.78; women = 804; studies = three; I² = 23%; moderate quality) or pyelonephritis (RR 3.09, 95% CI 0.54 to 17.55; women = 102; studies = two; I² = 0%; very low quality evidence). Finally, single-dose treatment of any microbial agent was associated with a decrease in reports of 'any side effects' (RR 0.70, 95% CI 0.56 to 0.88; 1460 women, studies = 12; I² = 9%; low quality evidence). Evidence was downgraded for risk of bias concerns in trials contributing data and for imprecise effect estimates (wide confidence intervals crossing the line of no effect, and in some cases, small studies with few events). A single-dose regimen of antibiotics may be less effective than a short-course (four- to seven-day) regimen, but more evidence is needed from large trials measuring important outcomes, such as cure rate. Women with asymptomatic bacteriuria in pregnancy should be treated by the standard regimen of antibiotics until more data become available testing seven-day treatment compared with shorter courses of three- or five-day regimens.

Solid oxide fuel cells with (La,Sr)(Ga,Mg)O3-δ electrolyte film deposited by radio-frequency magnetron sputtering

NASA Astrophysics Data System (ADS)

Wang, Sea-Fue; Lu, His-Chuan; Hsu, Yung-Fu; Hu, Yi-Xuan

2015-05-01

In this study, solid oxide fuel cells (SOFCs) containing a high quality La0.9Sr0.1Ga0.8Mg0.2O3-δ (LSGM) film deposited on anode supported substrate using RF magnetron sputtering are successfully prepared. The anode substrate is composed of two functional NiO/Sm0.2Ce0.8O2-δ (SDC) composite layers with ratios of 60/40 wt% and 50/50 wt% and a current collector layer of pure NiO. The as-deposited LSGM film appears to be amorphous in nature. After post-annealing at 1000 °C, a uniform and dense polycrystalline film with a composition of La0.87Sr0.13Ga0.85Mg0.15O3-δ and a thickness of 3.8 μm is obtained, which was well adhered to the anode substrate. A composite LSGM/La0.6Sr0.4Co0.2Fe0.8O3-δ (LSCF) layer, with a ratio of 30/70 wt%, is used as the cathode. The SOFC prepared reveals a good mechanical integrity with no sign of cracking, delamination, or discontinuity among the interfaces. The total cell resistance of a single cell with LSGM electrolyte film declines from 0.60 to 0.10 Ω cm2 as the temperature escalates from 600 to 800 °C and the open circuit voltage (OCV) ranges from 0.85 to 0.95 V. The maximum power density (MPD) of the single cell is reported as 0.65, 1.02, 1.30, 1.42, and 1.38 W cm-2 at 600, 650, 700, 750, and 800 °C, respectively. The good cell performance leads to the conclusion that RF magnetron sputtering is a feasible deposition method for preparing good quality LSGM films in SOFCs.

Measuring theory of mind in children. Psychometric properties of the ToM Storybooks.

PubMed

Blijd-Hoogewys, E M A; van Geert, P L C; Serra, M; Minderaa, R B

2008-11-01

Although research on Theory-of-Mind (ToM) is often based on single task measurements, more comprehensive instruments result in a better understanding of ToM development. The ToM Storybooks is a new instrument measuring basic ToM-functioning and associated aspects. There are 34 tasks, tapping various emotions, beliefs, desires and mental-physical distinctions. Four studies on the validity and reliability of the test are presented, in typically developing children (n = 324, 3-12 years) and children with PDD-NOS (n = 30). The ToM Storybooks have good psychometric qualities. A component analysis reveals five components corresponding with the underlying theoretical constructs. The internal consistency, test-retest reliability, inter-rater reliability, construct validity and convergent validity are good. The ToM Storybooks can be used in research as well as in clinical settings.

FusionArc optimization: a hybrid volumetric modulated arc therapy (VMAT) and intensity modulated radiation therapy (IMRT) planning strategy.

PubMed

Matuszak, Martha M; Steers, Jennifer M; Long, Troy; McShan, Daniel L; Fraass, Benedick A; Romeijn, H Edwin; Ten Haken, Randall K

2013-07-01

To introduce a hybrid volumetric modulated arc therapy/intensity modulated radiation therapy (VMAT/IMRT) optimization strategy called FusionArc that combines the delivery efficiency of single-arc VMAT with the potentially desirable intensity modulation possible with IMRT. A beamlet-based inverse planning system was enhanced to combine the advantages of VMAT and IMRT into one comprehensive technique. In the hybrid strategy, baseline single-arc VMAT plans are optimized and then the current cost function gradients with respect to the beamlets are used to define a metric for predicting which beam angles would benefit from further intensity modulation. Beams with the highest metric values (called the gradient factor) are converted from VMAT apertures to IMRT fluence, and the optimization proceeds with the mixed variable set until convergence or until additional beams are selected for conversion. One phantom and two clinical cases were used to validate the gradient factor and characterize the FusionArc strategy. Comparisons were made between standard IMRT, single-arc VMAT, and FusionArc plans with one to five IMRT∕hybrid beams. The gradient factor was found to be highly predictive of the VMAT angles that would benefit plan quality the most from beam modulation. Over the three cases studied, a FusionArc plan with three converted beams achieved superior dosimetric quality with reductions in final cost ranging from 26.4% to 48.1% compared to single-arc VMAT. Additionally, the three beam FusionArc plans required 22.4%-43.7% fewer MU∕Gy than a seven beam IMRT plan. While the FusionArc plans with five converted beams offer larger reductions in final cost--32.9%-55.2% compared to single-arc VMAT--the decrease in MU∕Gy compared to IMRT was noticeably smaller at 12.2%-18.5%, when compared to IMRT. A hybrid VMAT∕IMRT strategy was implemented to find a high quality compromise between gantry-angle and intensity-based degrees of freedom. This optimization method will allow patients to be simultaneously planned for dosimetric quality and delivery efficiency without switching between delivery techniques. Example phantom and clinical cases suggest that the conversion of only three VMAT segments to modulated beams may result in a good combination of quality and efficiency.

Schottky barrier diode based on β-Ga2O3 (100) single crystal substrate and its temperature-dependent electrical characteristics

NASA Astrophysics Data System (ADS)

He, Qiming; Mu, Wenxiang; Dong, Hang; Long, Shibing; Jia, Zhitai; Lv, Hangbing; Liu, Qi; Tang, Minghua; Tao, Xutang; Liu, Ming

2017-02-01

The Pt/β-Ga2O3 Schottky barrier diode and its temperature-dependent current-voltage characteristics were investigated for power device application. The edge-defined film-fed growth (EFG) technique was utilized to grow the (100)-oriented β-Ga2O3 single crystal substrate that shows good crystal quality characterized by X-ray diffraction and high resolution transmission electron microscope. Ohmic and Schottky electrodes were fabricated by depositing Ti and Pt metals on the two surfaces, respectively. Through the current-voltage (I-V) measurement under different temperature and the thermionic emission modeling, the fabricated Pt/β-Ga2O3 Schottky diode was found to show good performances at room temperature, including rectification ratio of 1010, ideality factor (n) of 1.1, Schottky barrier height (ΦB) of 1.39 eV, threshold voltage (Vbi) of 1.07 V, ON-resistance (RON) of 12.5 mΩ.cm2, forward current density at 2 V (J@2V) of 56 A/cm2, and saturation current density (J0) of 2 × 10-16 A/cm2. The effective donor concentration Nd - Na was calculated to be about 2.3 × 1014 cm3. Good temperature dependent performance was also found in the device. The Schottky barrier height was estimated to be about 1.3 eV-1.39 eV at temperatures ranging from room temperature to 150 °C. With increasing temperature, parameters such as RON and J@2V become better, proving that the diode can work well at high temperature. The EFG grown β-Ga2O3 single crystal is a promising material to be used in the power devices.

The role of the Therapeutic Goods Administration and the Medicine and Medical Devices Safety Authority in evaluating complementary and alternative medicines in Australia and New Zealand.

PubMed

Ghosh, Dilip; Skinner, Margot; Ferguson, Lynnette R

2006-04-03

Currently, the regulation of complementary and alternative medicines and related health claims in Australia and New Zealand is managed in a number of ways. Complementary medicines, including herbal, minerals, nutritional/dietary supplements, aromatherapy oils and homeopathic medicines are regulated under therapeutic goods/products legislation. The Therapeutic Goods Administration (TGA), a division of the Commonwealth Department of Health and Ageing is responsible for administering the provisions of the legislation in Australia. The New Zealand Medicines and Medical Devices Safety Authority (Medsafe) administers the provision of legislation in New Zealand. In December 2003 the Australian and New Zealand governments signed a Treaty to establish a single, bi-national agency to regulate therapeutic products, including medical devices prescription, over-the-counter and complementary medicines. A single agency will replace the Australian TGA and the New Zealand Medsafe. The role of the new agency will be to safeguard public health through regulation of the quality, safety and efficacy or performance of therapeutic products in both Australia and New Zealand. The major activities of the new joint Australia New Zealand therapeutic products agency are in product licensing, specifying labelling standards and setting the advertising scheme, together with determining the risk classes of medicines and creating an expanded list of ingredients permitted in Class I medicines. A new, expanded definition of complementary medicines is proposed and this definition is currently under consultation. Related Australian and New Zealand legislation is being developed to implement the joint scheme. Once this legislation is passed, the Treaty will come into force and the new joint regulatory scheme will begin. The agency is expected to commence operation no later than 1 July 2006 and will result in a single agency to regulate complementary and alternative medicines.

Dual-Energy Computed Tomography Angiography of the Head and Neck With Single-Source Computed Tomography: A New Technical (Split Filter) Approach for Bone Removal.

PubMed

Kaemmerer, Nadine; Brand, Michael; Hammon, Matthias; May, Matthias; Wuest, Wolfgang; Krauss, Bernhard; Uder, Michael; Lell, Michael M

2016-10-01

Dual-energy computed tomographic angiography (DE-CTA) has been demonstrated to improve the visualization of the head and neck vessels. The aim of this study was to test the potential of split-filter single-source dual-energy CT to automatically remove bone from the final CTA data set. Dual-energy CTA was performed in 50 consecutive patients to evaluate the supra-aortic arteries, either to grade carotid artery stenosis or to rule out traumatic dissections. Dual-energy CTA was performed on a 128-slice single-source CT system equipped with a special filter array to separate the 120-kV spectrum into a high- and a low-energy spectrum for DE-based automated bone removal. Image quality of fully automated bone suppression and subsequent manual optimization was evaluated by 2 radiologists on maximum intensity projections using a 4-grade scoring system. The effect of image reconstruction with an iterative metal artifact reduction algorithm on DE postprocessing was tested using a 3-grade scoring system, and the time demand for each postprocessing step was measured. Two patients were excluded due to insufficient arterial contrast enhancement; in the remaining 48 patients, automated bone removal could be performed successfully. The addition of iterative metal artifact reduction algorithm improved image quality in 58.3% of the cases. After manual optimization, DE-CTA image quality was rated excellent in 7, good in 29, and moderate in 10 patients. Interobserver agreement was high (κ = 0.85). Stenosis grading was not influenced using DE-CTA with bone removal as compared with the original CTA. The time demand for DE image reconstruction was significantly higher than for single-energy reconstruction (42.1 vs 20.9 seconds). Our results suggest that bone removal in DE-CTA of the head and neck vessels with a single-source CT is feasible and can be performed within acceptable time and moderate user interaction.

Rapid computation of single PET scan rest-stress myocardial blood flow parametric images by table look up.

PubMed

Guehl, Nicolas J; Normandin, Marc D; Wooten, Dustin W; Rozen, Guy; Ruskin, Jeremy N; Shoup, Timothy M; Woo, Jonghye; Ptaszek, Leon M; Fakhri, Georges El; Alpert, Nathaniel M

2017-09-01

We have recently reported a method for measuring rest-stress myocardial blood flow (MBF) using a single, relatively short, PET scan session. The method requires two IV tracer injections, one to initiate rest imaging and one at peak stress. We previously validated absolute flow quantitation in ml/min/cc for standard bull's eye, segmental analysis. In this work, we extend the method for fast computation of rest-stress MBF parametric images. We provide an analytic solution to the single-scan rest-stress flow model which is then solved using a two-dimensional table lookup method (LM). Simulations were performed to compare the accuracy and precision of the lookup method with the original nonlinear method (NLM). Then the method was applied to 16 single scan rest/stress measurements made in 12 pigs: seven studied after infarction of the left anterior descending artery (LAD) territory, and nine imaged in the native state. Parametric maps of rest and stress MBF as well as maps of left (f LV ) and right (f RV ) ventricular spill-over fractions were generated. Regions of interest (ROIs) for 17 myocardial segments were defined in bull's eye fashion on the parametric maps. The mean of each ROI was then compared to the rest (K 1r ) and stress (K 1s ) MBF estimates obtained from fitting the 17 regional TACs with the NLM. In simulation, the LM performed as well as the NLM in terms of precision and accuracy. The simulation did not show that bias was introduced by the use of a predefined two-dimensional lookup table. In experimental data, parametric maps demonstrated good statistical quality and the LM was computationally much more efficient than the original NLM. Very good agreement was obtained between the mean MBF calculated on the parametric maps for each of the 17 ROIs and the regional MBF values estimated by the NLM (K 1map LM  = 1.019 × K 1 ROI NLM  + 0.019, R 2  = 0.986; mean difference = 0.034 ± 0.036 mL/min/cc). We developed a table lookup method for fast computation of parametric imaging of rest and stress MBF. Our results show the feasibility of obtaining good quality MBF maps using modest computational resources, thus demonstrating that the method can be applied in a clinical environment to obtain full quantitative MBF information. © 2017 American Association of Physicists in Medicine.

Is non-linear frequency compression amplification beneficial to adults and children with hearing loss? A systematic review.

PubMed

Akinseye, Gladys Atinuke; Dickinson, Ann-Marie; Munro, Kevin J

2018-04-01

To conduct a systematic review of the benefits of non-linear frequency compression (NLFC) in adults and children. Ten databases were searched for studies comparing the effects of NLFC and conventional processing (CP) for the period January 2008 to September 2017. Twelve articles were included in this review: four adults and school-aged only, one pre-school only and three with both adults and school-aged children. A two-stage process was implemented to grade the evidence. The individual studies were graded based on their study type (from 1 = highest quality of evidence to 5 = the lowest quality) and then sub-graded based on their quality ("a" for "good quality" or "b" for "lesser quality"). All studies were awarded 4a, except the single pre-school study, which was awarded 2a. The overall evidence for each population was graded based on the quality, quantity and consistency of the studies. The body of evidence was rated as very low for both adults and school-aged children, but high for pre-school children. The low number (and quality) of studies means that evidence supporting the benefit from NLFC is inconclusive. Further high-quality RCTs are required to provide a conclusive answer to this question.

Super-resolution imaging applied to moving object tracking

NASA Astrophysics Data System (ADS)

Swalaganata, Galandaru; Ratna Sulistyaningrum, Dwi; Setiyono, Budi

2017-10-01

Moving object tracking in a video is a method used to detect and analyze changes that occur in an object that being observed. Visual quality and the precision of the tracked target are highly wished in modern tracking system. The fact that the tracked object does not always seem clear causes the tracking result less precise. The reasons are low quality video, system noise, small object, and other factors. In order to improve the precision of the tracked object especially for small object, we propose a two step solution that integrates a super-resolution technique into tracking approach. First step is super-resolution imaging applied into frame sequences. This step was done by cropping the frame in several frame or all of frame. Second step is tracking the result of super-resolution images. Super-resolution image is a technique to obtain high-resolution images from low-resolution images. In this research single frame super-resolution technique is proposed for tracking approach. Single frame super-resolution was a kind of super-resolution that it has the advantage of fast computation time. The method used for tracking is Camshift. The advantages of Camshift was simple calculation based on HSV color that use its histogram for some condition and color of the object varies. The computational complexity and large memory requirements required for the implementation of super-resolution and tracking were reduced and the precision of the tracked target was good. Experiment showed that integrate a super-resolution imaging into tracking technique can track the object precisely with various background, shape changes of the object, and in a good light conditions.

The effect of welding parameters on surface quality of AA6351 aluminium alloy

NASA Astrophysics Data System (ADS)

Yacob, S.; MAli, M. A.; Ahsan, Q.; Ariffin, N.; Ali, R.; Arshad, A.; Wahab, M. I. A.; Ismail, S. A.; Roji, NS M.; Din, W. B. W.; Zakaria, M. H.; Abdullah, A.; Yusof, M. I.; Kamarulzaman, K. Z.; Mahyuddin, A.; Hamzah, M. N.; Roslan, R.

2015-12-01

In the present work, the effects of gas metal arc welding-cold metal transfer (GMAW-CMT) parameters on surface roughness are experimentally assessed. The purpose of this study is to develop a better understanding of the effects of welding speed, material thickness and contact tip to work distance on the surface roughness. Experiments are conducted using single pass gas metal arc welding-cold metal transfer (GMAW-CMT) welding technique to join the material. The material used in this experiment was AA6351 aluminum alloy with the thickness of 5mm and 6mm. A Mahr Marsuft XR 20 machine was used to measure the average roughness (Ra) of AA6351 joints. The main and interaction effect analysis was carried out to identify process parameters that affect the surface roughness. The results show that all the input process parameters affect the surface roughness of AA6351 joints. Additionally, the average roughness (Ra) results also show a decreasing trend with increased of welding speed. It is proven that gas metal arc welding-cold metal transfer (GMAW-CMT)welding process has been successful in term of providing weld joint of good surface quality for AA6351 based on the low value surface roughness condition obtained in this setup. The outcome of this experimental shall be valuable for future fabrication process in order to obtained high good quality weld.

How to run a successful Journal

PubMed Central

Jawaid, Shaukat Ali; Jawaid, Masood

2017-01-01

Publishing and successfully running a good quality peer reviewed biomedical scientific journal is not an easy task. Some of the pre-requisites include a competent experienced editor supported by a team. Long term sustainability of a journal will depend on good quality manuscripts, active editorial board, good quality of reviewers, workable business model to ensure financial support, increased visibility which will ensure increased submissions, indexation in various important databases, online availability and easy to use website. This manuscript outlines the logistics and technical issues which need to be resolved before starting a new journal and ensuring sustainability of a good quality peer reviewed journal. PMID:29492089

QMEANclust: estimation of protein model quality by combining a composite scoring function with structural density information.

PubMed

Benkert, Pascal; Schwede, Torsten; Tosatto, Silvio Ce

2009-05-20

The selection of the most accurate protein model from a set of alternatives is a crucial step in protein structure prediction both in template-based and ab initio approaches. Scoring functions have been developed which can either return a quality estimate for a single model or derive a score from the information contained in the ensemble of models for a given sequence. Local structural features occurring more frequently in the ensemble have a greater probability of being correct. Within the context of the CASP experiment, these so called consensus methods have been shown to perform considerably better in selecting good candidate models, but tend to fail if the best models are far from the dominant structural cluster. In this paper we show that model selection can be improved if both approaches are combined by pre-filtering the models used during the calculation of the structural consensus. Our recently published QMEAN composite scoring function has been improved by including an all-atom interaction potential term. The preliminary model ranking based on the new QMEAN score is used to select a subset of reliable models against which the structural consensus score is calculated. This scoring function called QMEANclust achieves a correlation coefficient of predicted quality score and GDT_TS of 0.9 averaged over the 98 CASP7 targets and perform significantly better in selecting good models from the ensemble of server models than any other groups participating in the quality estimation category of CASP7. Both scoring functions are also benchmarked on the MOULDER test set consisting of 20 target proteins each with 300 alternatives models generated by MODELLER. QMEAN outperforms all other tested scoring functions operating on individual models, while the consensus method QMEANclust only works properly on decoy sets containing a certain fraction of near-native conformations. We also present a local version of QMEAN for the per-residue estimation of model quality (QMEANlocal) and compare it to a new local consensus-based approach. Improved model selection is obtained by using a composite scoring function operating on single models in order to enrich higher quality models which are subsequently used to calculate the structural consensus. The performance of consensus-based methods such as QMEANclust highly depends on the composition and quality of the model ensemble to be analysed. Therefore, performance estimates for consensus methods based on large meta-datasets (e.g. CASP) might overrate their applicability in more realistic modelling situations with smaller sets of models based on individual methods.

Two-dimensional antimonene single crystals grown by van der Waals epitaxy.

PubMed

Ji, Jianping; Song, Xiufeng; Liu, Jizi; Yan, Zhong; Huo, Chengxue; Zhang, Shengli; Su, Meng; Liao, Lei; Wang, Wenhui; Ni, Zhenhua; Hao, Yufeng; Zeng, Haibo

2016-11-15

Unlike the unstable black phosphorous, another two-dimensional group-VA material, antimonene, was recently predicted to exhibit good stability and remarkable physical properties. However, the synthesis of high-quality monolayer or few-layer antimonenes, sparsely reported, has greatly hindered the development of this new field. Here, we report the van der Waals epitaxy growth of few-layer antimonene monocrystalline polygons, their atomical microstructure and stability in ambient condition. The high-quality, few-layer antimonene monocrystalline polygons can be synthesized on various substrates, including flexible ones, via van der Waals epitaxy growth. Raman spectroscopy and transmission electron microscopy reveal that the obtained antimonene polygons have buckled rhombohedral atomic structure, consistent with the theoretically predicted most stable β-phase allotrope. The very high stability of antimonenes was observed after aging in air for 30 days. First-principle and molecular dynamics simulation results confirmed that compared with phosphorene, antimonene is less likely to be oxidized and possesses higher thermodynamic stability in oxygen atmosphere at room temperature. Moreover, antimonene polygons show high electrical conductivity up to 10 4  S m -1 and good optical transparency in the visible light range, promising in transparent conductive electrode applications.

Two-dimensional antimonene single crystals grown by van der Waals epitaxy

PubMed Central

Ji, Jianping; Song, Xiufeng; Liu, Jizi; Yan, Zhong; Huo, Chengxue; Zhang, Shengli; Su, Meng; Liao, Lei; Wang, Wenhui; Ni, Zhenhua; Hao, Yufeng; Zeng, Haibo

2016-01-01

Unlike the unstable black phosphorous, another two-dimensional group-VA material, antimonene, was recently predicted to exhibit good stability and remarkable physical properties. However, the synthesis of high-quality monolayer or few-layer antimonenes, sparsely reported, has greatly hindered the development of this new field. Here, we report the van der Waals epitaxy growth of few-layer antimonene monocrystalline polygons, their atomical microstructure and stability in ambient condition. The high-quality, few-layer antimonene monocrystalline polygons can be synthesized on various substrates, including flexible ones, via van der Waals epitaxy growth. Raman spectroscopy and transmission electron microscopy reveal that the obtained antimonene polygons have buckled rhombohedral atomic structure, consistent with the theoretically predicted most stable β-phase allotrope. The very high stability of antimonenes was observed after aging in air for 30 days. First-principle and molecular dynamics simulation results confirmed that compared with phosphorene, antimonene is less likely to be oxidized and possesses higher thermodynamic stability in oxygen atmosphere at room temperature. Moreover, antimonene polygons show high electrical conductivity up to 104 S m−1 and good optical transparency in the visible light range, promising in transparent conductive electrode applications. PMID:27845327

Good-quality social care for people with Parkinson’s disease: a qualitative study

PubMed Central

Kennedy, Fiona; Stocks, Amanda-Jayne; McDonnell, Ann; Ramaswamy, Bhanu; Wood, Brendan; Whitfield, Malcolm

2016-01-01

Objectives The study examines the meaning of good-quality social care for people with Parkinson's disease and their carers. It identifies, from their perspective, the impact of good-quality social care on health and well-being. Design Qualitative case study methodology, interview and framework analysis techniques were used. Setting: community locations in the north and midlands of England. Participants Data were collected from 43 participants including individual interviews with people with Parkinson's disease (n=4), formal and informal social care providers (n=13), 2 focus groups, 1 with people with Parkinson's disease and their carers (n=17), and 1 with professionals (n=8), plus a telephone interview with a former commissioner. Findings Good-quality social care, delivered in a timely fashion, was reported to have a positive impact on health. Furthermore, there is an indication that good-quality social care can prevent untoward events, such as infections, symptom deterioration and deterioration in mental health. The concept of the ‘Impact Gap’ developed from the findings, illustrates how the costs of care may be reduced by delivering good-quality social care. Control, choice and maintaining independence emerged as indicators of good-quality social care, irrespective of clinical condition. Participants identified characteristics indicative of good-quality social care specific to Parkinson's disease, including understanding Parkinson's disease, appropriate administration of medication, timing of care and reassessment. ‘Parkinson's aware’ social care was seen to generate psychological, physical and social benefits that were inter-related. Conclusions The findings indicate how maximising quality in social care delivery for people with Parkinson's disease can impact on health and well-being. Long-term or short-term benefits may result in prevented events and reductions in health and social care resource. Health professionals can be instrumental in early detection of and signposting to social care. PMID:26883233

Growth and characterization of diammonium copper disulphate hexahydrate single crystal

DOE Office of Scientific and Technical Information (OSTI.GOV)

Siva Sankari, R.; Perumal, Rajesh Narayana, E-mail: r.shankarisai@gmail.com

2014-03-01

Graphical abstract: Diammonium copper disulphate hexahydrate (DACS) is one of the most promising inorganic dielectric crystals with exceptional mechanical properties. Good quality crystals of DACS were grown by using solution method in a period of 30 days. The grown crystals were subjected to single crystal X-ray diffraction analysis in order to establish their crystalline nature. Thermo gravimetric, differential thermal analysis, FTIR, and UV–vis–NIR analysis were performed for the crystal. Several solid state physical parameters have been determined for the grown crystals. The dielectric constant and the dielectric loss and AC conductivity of the grown crystal were studied as a functionmore » of frequency and temperature has been calculated and plotted. - Highlights: • Diammonium copper disulphate is grown for the first time and CCDC number obtained. • Thermal analysis is done to see the stability range of the crystals. • Band gap and UV cut off wavelength of the crystal are determined to be 2.4 eV and 472.86 nm, respectively. • Dielectric constant, dielectric loss and AC conductivity are plotted as a function of applied field. - Abstract: Diammonium copper disulphate hexahydrate is one of the most promising inorganic crystals with exceptional dielectric properties. A good quality crystal was harvested in a 30-day period using solution growth method. The grown crystal was subjected to various characterization techniques like single crystal X-ray diffraction analysis, thermo gravimetric, differential thermal analysis, FTIR, and UV–vis–NIR analysis. Unit cell dimensions of the grown crystal have been identified from XRD studies. Functional groups of the title compounds have been identified from FTIR studies. Thermal stability of the samples was checked by TG/DTA studies. Band gap of the crystal was calculated. The dielectric constant and dielectric loss were studied as a function of frequency of the applied field. AC conductivity was plotted as a function of temperature.« less

A comparative investigation of seven indirect attitude measures.

PubMed

Bar-Anan, Yoav; Nosek, Brian A

2014-09-01

We compared the psychometric qualities of seven indirect attitude measures across three attitude domains (race, politics, and self-esteem) with a large sample (N = 23,413). We compared the measures on internal consistency, sensitivity to known effects, relationships with indirect and direct measures of the same topic, the reliability and validity of single-category attitude measurement, their ability to detect meaningful variance among people with nonextreme attitudes, and their robustness to the exclusion of misbehaving or well-behaving participants. All seven indirect measures correlated with each other and with direct measures of the same topic. These relations were always weak for self-esteem, moderate for race, and strong for politics. This pattern suggests that some of the sources of variation in the reliability and predictive validity of the indirect measures is a function of the concepts rather than the methods. The Implicit Association Test (IAT) and Brief IAT (BIAT) showed the best overall psychometric quality, followed by the Go–No-Go association task, Single-Target IAT (ST-IAT), Affective Misattribution Procedure (AMP), Sorting Paired Features task, and Evaluative Priming. The AMP showed a steep decline in its psychometric qualities when people with extreme attitude scores were removed. Single-category attitude scores computed for the IAT and BIAT showed good relationships with other attitude measures but no evidence of discriminant validity between paired categories. The other measures, especially the AMP and ST-IAT, showed better evidence for discriminant validity. These results inform us on the validity of the measures as attitude assessments, but do not speak to the implicitness of the measured constructs.

Evaluating the Good Ontology Design Guideline (GoodOD) with the Ontology Quality Requirements and Evaluation Method and Metrics (OQuaRE)

PubMed Central

Duque-Ramos, Astrid; Boeker, Martin; Jansen, Ludger; Schulz, Stefan; Iniesta, Miguela; Fernández-Breis, Jesualdo Tomás

2014-01-01

Objective To (1) evaluate the GoodOD guideline for ontology development by applying the OQuaRE evaluation method and metrics to the ontology artefacts that were produced by students in a randomized controlled trial, and (2) informally compare the OQuaRE evaluation method with gold standard and competency questions based evaluation methods, respectively. Background In the last decades many methods for ontology construction and ontology evaluation have been proposed. However, none of them has become a standard and there is no empirical evidence of comparative evaluation of such methods. This paper brings together GoodOD and OQuaRE. GoodOD is a guideline for developing robust ontologies. It was previously evaluated in a randomized controlled trial employing metrics based on gold standard ontologies and competency questions as outcome parameters. OQuaRE is a method for ontology quality evaluation which adapts the SQuaRE standard for software product quality to ontologies and has been successfully used for evaluating the quality of ontologies. Methods In this paper, we evaluate the effect of training in ontology construction based on the GoodOD guideline within the OQuaRE quality evaluation framework and compare the results with those obtained for the previous studies based on the same data. Results Our results show a significant effect of the GoodOD training over developed ontologies by topics: (a) a highly significant effect was detected in three topics from the analysis of the ontologies of untrained and trained students; (b) both positive and negative training effects with respect to the gold standard were found for five topics. Conclusion The GoodOD guideline had a significant effect over the quality of the ontologies developed. Our results show that GoodOD ontologies can be effectively evaluated using OQuaRE and that OQuaRE is able to provide additional useful information about the quality of the GoodOD ontologies. PMID:25148262

Evaluating the Good Ontology Design Guideline (GoodOD) with the ontology quality requirements and evaluation method and metrics (OQuaRE).

PubMed

Duque-Ramos, Astrid; Boeker, Martin; Jansen, Ludger; Schulz, Stefan; Iniesta, Miguela; Fernández-Breis, Jesualdo Tomás

2014-01-01

To (1) evaluate the GoodOD guideline for ontology development by applying the OQuaRE evaluation method and metrics to the ontology artefacts that were produced by students in a randomized controlled trial, and (2) informally compare the OQuaRE evaluation method with gold standard and competency questions based evaluation methods, respectively. In the last decades many methods for ontology construction and ontology evaluation have been proposed. However, none of them has become a standard and there is no empirical evidence of comparative evaluation of such methods. This paper brings together GoodOD and OQuaRE. GoodOD is a guideline for developing robust ontologies. It was previously evaluated in a randomized controlled trial employing metrics based on gold standard ontologies and competency questions as outcome parameters. OQuaRE is a method for ontology quality evaluation which adapts the SQuaRE standard for software product quality to ontologies and has been successfully used for evaluating the quality of ontologies. In this paper, we evaluate the effect of training in ontology construction based on the GoodOD guideline within the OQuaRE quality evaluation framework and compare the results with those obtained for the previous studies based on the same data. Our results show a significant effect of the GoodOD training over developed ontologies by topics: (a) a highly significant effect was detected in three topics from the analysis of the ontologies of untrained and trained students; (b) both positive and negative training effects with respect to the gold standard were found for five topics. The GoodOD guideline had a significant effect over the quality of the ontologies developed. Our results show that GoodOD ontologies can be effectively evaluated using OQuaRE and that OQuaRE is able to provide additional useful information about the quality of the GoodOD ontologies.

Simultaneous determination of six active components by a single standard to determine multicomponents combined with fingerprint analysis for the quality control of Rhizoma Chuanxiong.

PubMed

He, Yufei; Li, Qing; Bi, Kaishun

2015-04-01

To control the quality of Rhizoma Chuanxiong, a method based on high-performance liquid chromatography method coupled with diode array detection was developed for the quantitative analysis of six active ingredients using a single standard to determine multi-components and chemical fingerprint analysis for the first time. The separation was performed on an Agilent Zorbax SB-C18 column by gradient elution with methanol and aqueous phase (containing 0.5% glacial acetic acid) at a flow rate of 1.0 mL/min. The UV wavelength was set at 274 nm. This assay was fully validated with respect to precision, repeatability, and accuracy. All calibration curves showed good linearity (R(2) > 0.9994) within test ranges. The limit of detection and limit of quantification were lower than 0.01 and 0.03 μg/mL, respectively. The relative standard deviation for repeatability and the intermediate precision of six analytes were less than 1.6 and 2.5%, respectively, the overall recovery was 96.1-103.1%. In addition, fingerprint chromatography using hierarchical clustering analysis and similarity analysis was performed to differentiate and classify the samples. The method described here could provide a more comprehensive and reasonable scientific assessment of the quality of Rhizoma Chuanxiong. Therefore, the strategy is feasible, credible, and is easily and effectively adapted for evaluating the quality control of Rhizoma Chuanxiong. © 2015 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Insufficient quality of sputum submitted for tuberculosis diagnosis and associated factors, in Klaten district, Indonesia

PubMed Central

Sakundarno, Mateus; Nurjazuli, Nurjazuli; Jati, Sutopo Patria; Sariningdyah, Retna; Purwadi, Sumarsono; Alisjahbana, Bachti; van der Werf, Marieke J

2009-01-01

Background Sputum smear microscopy is the standard diagnostic method for detection of smear positive pulmonary tuberculosis (TB). Insufficient quality of sputum might result in missing cases. In this study we aimed at assessing the quality of sputum in a district in Central Java and determining patient and health worker factors associated with submission of three good quality sputum samples. Methods In 16 health centers information was collected on the quality of sputum submitted by TB suspects, i.e. volume, color, and viscosity. TB suspects were interviewed to assess their knowledge of TB, motivation to provide sputum and whether they were informed why and how to produce a sputum sample. Health workers were interviewed to assess what information they provided to TB suspects about the reason for sputum examination, methods to produce sputum and characteristics of a good quality sputum sample. All health worker and patient factors were evaluated for association with sputum quality. Results Of 387 TB suspects, 294 (76.0%) could be traced and interviewed, and of 272 (70.3%) information about sputum quality was available. Of those 203 (74.6%) submitted three samples, 90 (33.1%) provided at least one good sample, and 37 (13.6%) provided three good quality sputum samples. Of the 272 TB suspects, 168 (61.8%) mentioned that information on the reason for sputum examination was provided, 66 (24.3%) remembered that they were informed about how to produce sputum and 40 (14.7%) recalled being informed about the characteristics of good quality sputum. Paramedics reported to provide often/always information on the importance of sputum examination, and when to produce sputum. Information on how to produce sputum and characteristics of a good sputum sample was less often provided. None of the studied patient characteristics or health worker factors was associated with providing good quality sputum. Conclusion A considerable number of TB suspects did not provide three sputum samples and a large number of sputum samples were of insufficient quality. Training of health workers in providing health education to the TB suspect about the reason for sputum examination and how to produce a good quality sputum sample should be a priority of the TB program. PMID:19426477

[A fine line between legal and illegal oral drug repackaging].

PubMed

Casanova, Heberto Arboleya; Sánchez, Héctor Marino Zavala; Fernández, Angélica María Hernández; Herrera, Dulce Janeth González

2016-06-01

In 2009, with the implementation of the National Hospital Pharmacy Model, Mexico began regulating single-dose drugs. The repackaging of oral drugs is fundamental and critical and should be standardized by Mexican health legislation to enable quality drugs to be dispensed. Data is required on stability, compatibility, drug interactions, containers, and repackaging methods, in order to establish a new expiration date. The literature on health regulations applicable to repackaging was analyzed, revealing major conceptual imprecisions since there is no legislation in Mexico that regulates repackaging; rather, everything is carried out according to pharmacists' recommendations and criteria. The conclusion is that the regulations need to be rewritten to establish minimum single-dose oral drug criteria for dispensing hospitals-regulations that cover infrastructure, equipment, and professionals complying with good practices in oral drug repackaging. A proposal is offered to implement an official Mexican standard that regulates single-dose repackaging and unifies concepts, criteria, and means of verification, while the pharmaceutical industry would be responsible for the technology and resources for single-dose drug packaging designed for the health sector.

Influence of VO2+ ions on structural and optical properties of potassium succinate-succinic acid single crystal for non-linear optical applications

NASA Astrophysics Data System (ADS)

Juliet sheela, K.; Subramanian, P.

2018-04-01

A transparent and good optical quality semi organic single crystal of vanadium doped potassium succinate-succinic acid (KSSA) was synthesized by slow evaporation technique at room temperature. The structural perfection was supported by the powder XRD of the KSSA-VO2+ single crystal. Optical behavior of the material was discovered from the absorption and transmission spectra of UV-vis-NIR characterization. Functional group and presence of metal ion in the specimen are depicted from FTIR traces. From the photoluminescence studies, emission of wavelength in the violet region (418 nm) at the excitation of 243 nm could be ascertained. EDAX, SEM measurements identify presence of elements and pictures the step-line growth and the imperfection presents in the grown crystal. EPR analysis extracts the information about the local site symmetry around the impurity ion, molecular orbital coefficients, admixture coefficients and ground state wave function of VO2+ doped KSSA single crystal. Second harmonic generation (SHG) efficiency of the grown crystal was investigated to explore the NLO characteristic of the material.

Successfully Reducing Hospitalizations of Nursing Home Residents: Results of the Missouri Quality Initiative.

PubMed

Rantz, Marilyn J; Popejoy, Lori; Vogelsmeier, Amy; Galambos, Colleen; Alexander, Greg; Flesner, Marcia; Crecelius, Charles; Ge, Bin; Petroski, Gregory

2017-11-01

The goals of the Missouri Quality Initiative (MOQI) for long-stay nursing home residents were to reduce the frequency of avoidable hospital admissions and readmissions, improve resident health outcomes, improve the process of transitioning between inpatient hospitals and nursing facilities, and reduce overall healthcare spending without restricting access to care or choice of providers. The MOQI was one of 7 program sites in the United States, with specific interventions unique to each site tested for the Centers for Medicaid and Medicare Services (CMS) Innovations Center. A prospective, single group intervention design, the MOQI included an advanced practice registered nurse (APRN) embedded full-time within each nursing home (NH) to influence resident care outcomes. Data were collected continuously for more than 3 years from an average of 1750 long-stay Medicare, Medicaid, and private pay residents living each day in 16 participating nursing homes in urban, metro, and rural communities within 80 miles of a major Midwestern city in Missouri. Performance feedback reports were provided to each facility summarizing their all-cause hospitalizations and potentially avoidable hospitalizations as well as a support team of social work, health information technology, and INTERACT/Quality Improvement Coaches. The MOQI achieved a 30% reduction in all-cause hospitalizations and statistically significant reductions in 4 single quarters of the 2.75 years of full implementation of the intervention for long-stay nursing home residents. As the population of older people explodes in upcoming decades, it is critical to find good solutions to deal with increasing costs of health care. APRNs, working with multidisciplinary support teams, are a good solution to improving care and reducing costs if all nursing home residents have access to APRNs nationwide. Copyright © 2017 AMDA – The Society for Post-Acute and Long-Term Care Medicine. Published by Elsevier Inc. All rights reserved.

Economic evaluation of enhanced asthma management: a systematic review

PubMed Central

Yong, Yee V.; Shafie, Asrul A.

2014-01-01

Objectives: To evaluate and compare full economic evaluation studies on the cost-effectiveness of enhanced asthma management (either as an adjunct to usual care or alone) vs. usual care alone. Methods: Online databases were searched for published journal articles in English language from year 1990 to 2012, using the search terms ‘“asthma” AND (“intervene” OR “manage”) AND (“pharmacoeconomics” OR “economic evaluation” OR “cost effectiveness” OR “cost benefit” OR “cost utility”)’. Hand search was done for local publishing. Only studies with full economic evaluation on enhanced management were included (cost consequences (CC), cost effectiveness (CE), cost benefit (CB), or cost utility (CU) analysis). Data were extracted and assessed for the quality of its economic evaluation design and evidence sources. Results: A total of 49 studies were included. There were 3 types of intervention for enhanced asthma management: education, environmental control, and self-management. The most cost-effective enhanced management was a mixture of education and self-management by an integrated team of healthcare and allied healthcare professionals. In general, the studies had a fair quality of economic evaluation with a mean QHES score of 73.7 (SD=9.7), and had good quality of evidence sources. Conclusion: Despite the overall fair quality of economic evaluations but good quality of evidence sources for all data components, this review showed that the delivered enhanced asthma managements, whether as single or mixed modes, were overall effective and cost-reducing. Whilst the availability and accessibility are an equally important factor to consider, the sustainability of the cost-effective management has to be further investigated using a longer time horizon especially for chronic diseases such as asthma. PMID:25580173

Systems and processes that ensure high quality care.

PubMed

Bassett, Sally; Westmore, Kathryn

2012-10-01

This is the second in a series of articles examining the components of good corporate governance. It considers how the structures and processes for quality governance can affect an organisation's ability to be assured about the quality of care. Complex information systems and procedures can lead to poor quality care, but sound structures and processes alone are insufficient to ensure good governance, and behavioural factors play a significant part in making sure that staff are enabled to provide good quality care. The next article in this series looks at how the information reporting of an organisation can affect its governance.

Synthesis, crystal growth and characterization of a phase matchable nonlinear optical single crystal: p-chloro dibenzylideneacetone

NASA Astrophysics Data System (ADS)

Ravindra, H. J.; John Kiran, A.; Nooji, Satheesha Rai; Dharmaprakash, S. M.; Chandrasekharan, K.; Kalluraya, Balakrishna; Rotermund, Fabian

2008-05-01

Good quality single crystals of p-chloro dibenzylideneacetone (CDBA) of size 13 mm×8 mm×2 mm were grown by slow evaporation solution growth technique. The grown crystals were confirmed by elemental analysis, Fourier transform infrared (FTIR) analysis and single crystal X-ray diffraction techniques. From the thermo gravimetric/differential thermal (TG/DT) analysis, the CDBA was found to be thermally stable up to 250 °C. The mechanical stability of the crystal is comparable with that of the other reported chalcones. The lower optical cut-off wavelength for this crystal was observed at 440 nm. The laser damage threshold of the crystal was 0.6 GW/cm 2 at 532 nm. The second harmonic generation conversion efficiency of the powder sample of CDBA was found to be 4.5 times greater than that of urea. We also demonstrate the existence of the phase matching property in this crystal using Kurtz powder technique.

Quality of the delivery services in health facilities in Northern Ethiopia.

PubMed

Fisseha, Girmatsion; Berhane, Yemane; Worku, Alemayehu; Terefe, Wondwossen

2017-03-09

Substantial improvements have been observed in the coverage of and access to maternal health service, especially in skilled birth attendants, in Ethiopia. However, the quality of care has been lagging behind. Therefore, this study investigated the status of the quality of delivery services in Northern Ethiopia. A facility based survey was conducted from December 2014 to February 2015 in Northern Ethiopia. The quality of delivery service was assessed in 32 health facilities using a facility audit checklist, by reviewing delivery, by conducting in-depth interview and observation, and by conducting exit interviews with eligible mothers. Facilities were considered as 'good quality' if they scored positively on 75% of the quality indicators set in the national guidelines for all the three components; input (materials, infrastructure, and human resource), process (adherence to standard care procedures during intrapartum and immediate postpartum periods) and output (the mothers' satisfaction and utilization of lifesaving procedures). Overall 2 of 32 (6.3%) of the study facilities fulfilled all the three quality components; input, process and output. Two of the three components were assessed as good in 11 of the 32 (34.4%) health facilities. The input quality was the better of the other quality components; which was good in 21 out of the 32 (65.6%) health facilities. The process and output quality was good in only 10 of the 32 (31.3%) facilities. Only 6.3% of the studied health facilities had good quality in all three dimensions of quality measures that was done in accordance to the national delivery service guidelines. The most compromised quality component was the process. Systematic and sustained efforts need to be strengthened to improve all dimensions of quality in order to achieve the desired quality of delivery services and increase the proportion of births occurring in health facilities.

Efficient Generation of an Array of Single Silicon-Vacancy Defects in Silicon Carbide

NASA Astrophysics Data System (ADS)

Wang, Junfeng; Zhou, Yu; Zhang, Xiaoming; Liu, Fucai; Li, Yan; Li, Ke; Liu, Zheng; Wang, Guanzhong; Gao, Weibo

2017-06-01

Color centers in silicon carbide have increasingly attracted attention in recent years owing to their excellent properties such as single-photon emission, good photostability, and long spin-coherence time even at room temperature. As compared to diamond, which is widely used for hosting nitrogen-vacancy centers, silicon carbide has an advantage in terms of large-scale, high-quality, and low-cost growth, as well as an advanced fabrication technique in optoelectronics, leading to prospects for large-scale quantum engineering. In this paper, we report an experimental demonstration of the generation of a single-photon-emitter array through ion implantation. VSi defects are generated in predetermined locations with high generation efficiency (approximately 19 % ±4 % ). The single emitter probability reaches approximately 34 % ±4 % when the ion-implantation dose is properly set. This method serves as a critical step in integrating single VSi defect emitters with photonic structures, which, in turn, can improve the emission and collection efficiency of VSi defects when they are used in a spin photonic quantum network. On the other hand, the defects are shallow, and they are generated about 40 nm below the surface which can serve as a critical resource in quantum-sensing applications.

Threshold Dynamics of a Semiconductor Single Atom Maser

NASA Astrophysics Data System (ADS)

Liu, Yinyu

Photon emission from single emitters provides fundamental insight into the detailed interaction between light and matter. Here we demonstrate a semiconductor single atom maser (SeSAM) that consists of a single InAs double quantum dot (DQD) that is coupled to a high quality factor microwave cavity. A finite bias results in population inversion in the DQD, enabling sizable cavity gain and stimulated emission. We develop a pulsed-gate approach that allows the SeSAM to be tuned across the masing threshold. The cavity output power as a function of DQD current is in good agreement with single atom maser theory once a small correction for lead emission is included. Photon statistics measurements show that the second-order correlation function of intra-cavity photon number, nc, crosses over from 〈nc2 〉 /〈nc 〉 2 = 2.1 below threshold to 〈nc2 〉 /〈nc 〉 2 = 1.2 above threshold. Large fluctuations are observed at threshold. In collaboration with J. Stehlik, C. Eichler, X. Mi, T. R. Hartke, M. J. Gullans, J. M. Taylor and J. R. Petta. Supported by the NSF and the Gordon and Betty Moore Foundation's EPiQS initiative through Grant No. GBMF4535.

Client Good Moments: An Intensive Analysis of a Single Session.

ERIC Educational Resources Information Center

Stalikas, Anastassios; Fitzpatrick, Marilyn

1995-01-01

An intensive analysis of a single counseling session conducted by Fritz Perls was carried out to examine relationships among client experiencing level, client strength of feeling, counselor interventions, and client good moments. The possibility that positive therapeutic outcome is related to the accretion of good moments is discussed. (JBJ)

Exploring the concept of quality care for the person who is dying.

PubMed

Stefanou, Nichola; Faircloth, Sandra

2010-12-01

The concept of good quality care for the patient who is dying is diverse and complex. Many of the actions that are being taken to increase the quality of care of the dying patient are based around outcome, uniformity of service and standardization of process. There are two main areas that are referred to when dealing with care of the dying patient; end-of-life care and palliative care. High quality end-of-life care is increasingly recognized as an ethical obligation of health-care providers, clinicians and organizations, and yet there appears little evidence from the patients' perspective. There are many national and local initiatives taking place to improve the quality of care people receive towards the end of their life. This being said initiatives alone will not achieve good quality care and deliver good patient experiences. Only clinicians working at the front line can truly influence the way in which quality is improved and good experiences delivered.

Interactions between environmental variables determine immunity in the Indian meal moth Plodia interpunctella.

PubMed

Triggs, Alison; Knell, Robert J

2012-03-01

1. Animals raised in good environmental conditions are expected to have more resources to invest in immunity than those raised in poor conditions. Variation in immune activity and parasite resistance in response to changes in environmental temperature, population density and food quality have been shown in many invertebrate species. 2. Almost all studies to date have examined the effects of individual variables in isolation. The aim of this study was to address whether environmental factors interact to produce synergistic effects on phenoloxidase (PO) activity and haemocyte count, both indicators of immune system activity. Temperature, food quality and density were varied in a fully factorial design for a total of eight treatment combinations. 3. Strong interactions between the three environmental variables led to the magnitude and in some cases the direction of the effect of most variables changing as the other environmental factors were altered. Overall, food quality had the most important and consistent influence, larvae raised on a good-quality diet having substantially higher PO activity in every case and substantially higher haemocyte counts in all treatments except unheated/low density. 4. When food quality was good, the larvae showed 'density-dependent prophylaxis': raising their investment in immunity when population density is high. When food quality was poor and the temperature low, however, those larvae raised at high densities invested less in immunity. 5. Increased temperature is often thought to lead to increased immune reactivity in ectotherms, but we found that the effect of temperature was strongly dependent on the values of other environmental variables. PO activity increased with temperature when larvae were raised on good food or when density was high, but when food was poor and density low, a higher temperature led to reduced PO activity. A higher temperature led to higher haemocyte counts when density was high and food quality was poor, but in all other cases, the effect of increased temperature was either close to zero or somewhat negative. 6. Although PO activity and haemocyte count were weakly correlated across the whole data set, there were a number of treatments where the two measures responded in different ways to environmental change. Overall, effect sizes for PO activity were substantially higher than those for haemocyte count, indicating that the different components of the immune system vary in their sensitivity to environmental change. 7. Predictions of the effect of environmental or population change on immunity and disease dynamics based on laboratory experiments that only investigate the effects of single variable are likely to be inaccurate or even entirely wrong. © 2011 The Authors. Journal of Animal Ecology © 2011 British Ecological Society.

Influence of extrusion-cooking parameters on some quality aspects of precooked pasta-like products.

PubMed

Wójtowicz, A; Mościcki, L

2009-06-01

The present article aims to evaluate some quality parameters and texture characteristics of precooked wheat pasta-like products. Using the methods for pasta and instant noodles the tested parameters were water absorption, starch gelatinization degree, cooking losses, and hardness. The texture profile was characterized using Zwick apparatus by cutting test with the head speed of 10 mm/min and expressed as hardness and firmness of hydrated products. SEM pictures were used to illustrate the internal structure of dry and cooked pasta-like products. Dough moisture content and process conditions influenced all tested quality parameters of the pasta-like products processed on a modified single screw extrusion-cooker TS-45 with L: D = 16: 1. Good organoleptical quality (notes higher than 4 in a 5-point scale) and firm texture were observed for common wheat flour pasta processed at 30% m.c. Hardness and firmness of hydrated products lowered with a longer hydration time in hot water. The firmest texture and low stickiness was observed for products with a highest starch gelatinization degree.

Enzymatic treatment to improve the quality of black tea extracts.

PubMed

Chandini, S K; Rao, L Jaganmohan; Gowthaman, M K; Haware, D J; Subramanian, R

2011-08-01

Enzymatic extraction was investigated to improve the quality of black tea extracts with pretreatment of pectinase and tannase independently, successively and simultaneously. Pectinase improved the extractable-solids-yield (ESY) up to 11.5%, without much of an improvement in polyphenols recovery, while tannase pre-treatment showed a significant improvement in polyphenols recovery (14.3%) along with an 11.1% improvement in ESY. Among the four treatments, tannase-alone treatment showed the maximum improvement in tea quality, with higher polyphenols-in-extracted solids. Treatments involving tannase resulted in the significant release of gallic acid, due to its hydrolytic activity, leading to greater solubility besides favourably improving TF/TR ratio. The results suggested that employing a single enzyme, tannase, for the pre-treatment of black tea is desirable. Enzymatic extraction may be preferred over enzymatic clarification as it not only displayed reduction in tea cream and turbidity but also improved the recovery of polyphenols and ESY in the extract, as well as maintaining a good balance of tea quality. Copyright © 2011 Elsevier Ltd. All rights reserved.

Raman beam combining for laser brightness enhancement

DOEpatents

Dawson, Jay W.; Allen, Graham S.; Pax, Paul H.; Heebner, John E.; Sridharan, Arun K.; Rubenchik, Alexander M.; Barty, Chrisopher B. J.

2015-10-27

An optical source capable of enhanced scaling of pulse energy and brightness utilizes an ensemble of single-aperture fiber lasers as pump sources, with each such fiber laser operating at acceptable pulse energy levels. Beam combining involves stimulated Raman scattering using a Stokes' shifted seed beam, the latter of which is optimized in terms of its temporal and spectral properties. Beams from fiber lasers can thus be combined to attain pulses with peak energies in excess of the fiber laser self-focusing limit of 4 MW while retaining the advantages of a fiber laser system of high average power with good beam quality.

A look at 15 years of planar thallium-201 imaging

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kaul, S.

1989-09-01

Extensive experience has been accumulated over the past 15 years regarding planar thallium-201 imaging. Quantitation of technically superior images provides a high sensitivity and specificity for the detection of CAD. In addition, planar thallium-201 images provide very important prognostic information in different clinical situations. Although single photon emission computerized tomography offers potential theoretical advantages over planar imaging, because of the problems involved in reconstruction, specifically the creation of artifacts, it may not be the ideal imaging modality in all situations. Good quality planar thallium-201 imaging still has an important role in clinical cardiology today. 144 references.

Zero lattice mismatch and twin-free single crystalline ScN buffer layers for GaN growth on silicon

DOE Office of Scientific and Technical Information (OSTI.GOV)

Lupina, L.; Zoellner, M. H.; Dietrich, B.

2015-11-16

We report the growth of thin ScN layers deposited by plasma-assisted molecular beam epitaxy on Sc{sub 2}O{sub 3}/Y{sub 2}O{sub 3}/Si(111) substrates. Using x-ray diffraction, Raman spectroscopy, and transmission electron microscopy, we find that ScN films grown at 600 °C are single crystalline, twin-free with rock-salt crystal structure, and exhibit a direct optical band gap of 2.2 eV. A high degree of crystalline perfection and a very good lattice matching between ScN and GaN (misfit < 0.1%) makes the ScN/Sc{sub 2}O{sub 3}/Y{sub 2}O{sub 3} buffer system a very promising template for the growth of high quality GaN layers on silicon.

Phase aided 3D imaging and modeling: dedicated systems and case studies

NASA Astrophysics Data System (ADS)

Yin, Yongkai; He, Dong; Liu, Zeyi; Liu, Xiaoli; Peng, Xiang

2014-05-01

Dedicated prototype systems for 3D imaging and modeling (3DIM) are presented. The 3D imaging systems are based on the principle of phase-aided active stereo, which have been developed in our laboratory over the past few years. The reported 3D imaging prototypes range from single 3D sensor to a kind of optical measurement network composed of multiple node 3D-sensors. To enable these 3D imaging systems, we briefly discuss the corresponding calibration techniques for both single sensor and multi-sensor optical measurement network, allowing good performance of the 3DIM prototype systems in terms of measurement accuracy and repeatability. Furthermore, two case studies including the generation of high quality color model of movable cultural heritage and photo booth from body scanning are presented to demonstrate our approach.

[Determination of five naphthaquinones in Arnebia euchroma by quantitative analysis multi-components with single-marker].

PubMed

Zhao, Wen-Wen; Wu, Zhi-Min; Wu, Xia; Zhao, Hai-Yu; Chen, Xiao-Qing

2016-10-01

This study is to determine five naphthaquinones (acetylshikonin, β-acetoxyisovalerylalkannin, isobutylshikonin, β,β'-dimethylacrylalkannin,α-methyl-n-butylshikonin） by quantitative analysis of multi-components with a single marker (QAMS). β,β'-Dimethylacrylalkannin was selected as the internal reference substance, and the relative correlation factors (RCFs) of acetylshikonin, β-acetoxyisovalerylalkannin, isobutylshikonin and α-methyl-n-butylshikonin were calculated. Then the ruggedness of relative correction factors was tested on different instruments and columns. Meanwhile, 16 batches of Arnebia euchroma were analyzed by external standard method (ESM) and QAMS, respectively. The peaks were identifited by LC-MS. The ruggedness of relative correction factors was good. And the analytical results calculated by ESM and QAMS showed no difference. The quantitative method established was feasible and suitable for the quality evaluation of A. euchroma. Copyright© by the Chinese Pharmaceutical Association.

[Laparoscopic single patient use instruments: expensive outsourcing of product quality?].

PubMed

von Eiff, W; Ziegenbein, R

2000-01-01

The supply of medical goods is an important critical success factor in German hospitals. One major managerial area in the procurement concerns the decision between single patient use (SPU) and multiple patient use (MPU) products. Especially laparoscopic instruments which are generally expensive are a field of interest for decision makers. Due to a lack of quantifiable factors describing the two different forms of supply alternatives with their effects on effectivity and efficiency of the procurement process and the final use are often not taken into account. Since it is expected that in the future more and more laparoscopic instruments will be needed there is a necessity for finding a concept allowing the identification of the "right" product. The Center for Hospital Management (CKM) has the aim to develop a corresponding approach but needs the help of the reader.

Management of the high-order mode content in large (40 microm) core photonic bandgap Bragg fiber laser.

PubMed

Gaponov, D A; Février, S; Devautour, M; Roy, P; Likhachev, M E; Aleshkina, S S; Salganskii, M Y; Yashkov, M V; Guryanov, A N

2010-07-01

Very large-mode-area Yb(3+)-doped single-mode photonic bandgap (PBG) Bragg fiber oscillators are considered. The transverse hole-burning effect is numerically modeled, which helps properly design the PBG cladding and the Yb(3+)-doped region for the high-order mode content to be carefully controlled. A ratio of the Yb(3+)-doped region diameter to the overall core diameter of 40% allows for single-mode emission, even for small spool diameters of 15 cm. Such a fiber was manufactured and subsequently used as the core element of a cw oscillator. Very good beam quality parameter M(2)=1.12 and slope efficiency of 80% were measured. Insensitivity to bending, exemplified by the absence of temporal drift of the beam, was demonstrated for curvature diameter as small as 15 cm.

Quality of Life Among HIV-Infected Patients in Brazil after Initiation of Treatment

PubMed Central

Campos, Lorenza Nogueira; César, Cibele Comini; Guimarães, Mark Drew Crosland

2009-01-01

INTRODUCTION Despite improvement in clinical treatment for HIV-infected patients, the impact of antiretroviral therapy on the overall quality of life has become a major concern. OBJECTIVE To identify factors associated with increased levels of self-reported quality of life among HIV-infected patients after four months of antiretroviral therapy. METHODS Patients were recruited at two public health referral centers for AIDS, Belo Horizonte, Brazil, for a prospective adherence study. Patients were interviewed before initiating treatment (baseline) and after one and four months. Quality of life was assessed using a psychometric instrument, and factors associated with good/very good quality of life four months after the initiation of antiretroviral therapy were assessed using a cross-sectional approach. Logistic regression was used for analysis. RESULTS Overall quality of life was classified as ‘very good/good’ by 66.4% of the participants four months after initiating treatment, while 33.6% classified it as ‘neither poor nor good/poor/very poor’. Logistic regression indicated that >8 years of education, none/mild symptoms of anxiety and depression, no antiretroviral switch, lower number of adverse reactions and better quality of life at baseline were independently associated with good/very good quality of life over four months of treatment. CONCLUSIONS Our results highlight the importance of modifiable factors such as psychiatric symptoms and treatment-related variables that may contribute to a better quality of life among patients initiating treatment. Considering that poor quality of life is related to non-adherence to antiretroviral therapy, careful clinical monitoring of these factors may contribute to ensuring the long-term effectiveness of antiretroviral regimens. PMID:19759880

Numerical investigation of tube hyroforming of TWT using Corner Fill Test

NASA Astrophysics Data System (ADS)

Zribi, Temim; Khalfallah, Ali

2018-05-01

Tube hydroforming presents a very good alternative to conventional forming processes for obtaining good quality mechanical parts used in several industrial fields, such as the automotive and aerospace sectors. Research in the field of tube hydroforming is aimed at improving the formability, stiffness and weight reduction of manufactured parts using this process. In recent years, a new method of hydroforming appears; it consists of deforming parts made from welded tubes and having different thicknesses. This technique which contributes to the weight reduction of the hydroformed tubes is a good alternative to the conventional tube hydroforming. This technique makes it possible to build rigid and light structures with a reduced cost. However, it is possible to improve the weight reduction by using dissimilar tailor welded tubes (TWT). This paper is a first attempt to analyze by numerical simulation the behavior of TWT hydroformed in square cross section dies, commonly called (Corner Fill Test). Considered tubes are composed of two materials assembled by butt welding. The present analysis will focus on the effect of loading paths on the formability of the structure by determining the change in thickness in several sections of the part. A comparison between the results obtained by hydroforming the butt joint of tubes made of dissimilar materials and those obtained using single-material tube is achieved. Numerical calculations show that the bi-material welded tube has better thinning resistance and a more even thickness distribution in the circumferential directions when compared to the single-material tube.

Feathering effect detection and artifact agglomeration index-based video deinterlacing technique

NASA Astrophysics Data System (ADS)

Martins, André Luis; Rodrigues, Evandro Luis Linhari; de Paiva, Maria Stela Veludo

2018-03-01

Several video deinterlacing techniques have been developed, and each one presents a better performance in certain conditions. Occasionally, even the most modern deinterlacing techniques create frames with worse quality than primitive deinterlacing processes. This paper validates that the final image quality can be improved by combining different types of deinterlacing techniques. The proposed strategy is able to select between two types of deinterlaced frames and, if necessary, make the local correction of the defects. This decision is based on an artifact agglomeration index obtained from a feathering effect detection map. Starting from a deinterlaced frame produced by the "interfield average" method, the defective areas are identified, and, if deemed appropriate, these areas are replaced by pixels generated through the "edge-based line average" method. Test results have proven that the proposed technique is able to produce video frames with higher quality than applying a single deinterlacing technique through getting what is good from intra- and interfield methods.

Effect of Zn and Te beam intensity upon the film quality of ZnTe layers on severely lattice mismatched sapphire substrates by molecular beam epitaxy

NASA Astrophysics Data System (ADS)

Nakasu, Taizo; Sun, W.; Kobayashi, M.; Asahi, T.

2017-06-01

Zinc telluride layers were grown on highly-lattice-mismatched sapphire substrates by molecular beam epitaxy, and their crystallographic properties were studied by means of X-ray diffraction pole figures. The crystal quality of the ZnTe thin film was further studied by scanning electron microscopy, X-ray rocking curves and low-temperature photoluminescence measurements. These methods show that high-crystallinity (111)-oriented single domain ZnTe layers with the flat surface and good optical properties are realized when the beam intensity ratio of Zn and Te beams is adjusted. The migration of Zn and Te was inhibited by excess surface material and cracks were appeared. In particular, excess Te inhibited the formation of a high-crystallinity ZnTe film. The optical properties of the ZnTe layer revealed that the exciton-related features were dominant, and therefore the film quality was reasonably high even though the lattice constants and the crystal structures were severely mismatched.

Quality assurance in forensic odontology

PubMed

Solheim, T

2018-05-30

Quality assurance or quality control is a term and concept coming from the industry. Here it is most important. All products must have a minimum quality and variation in size, for example, must be kept within certain strict limits. There must be a system to control this. May be not every single product is controlled, but spot tests must be taken. Measures must be taken to improve the quality if it is not good enough. This concept has been transferred to medicine, odontology, and consequently also to forensic odontology. These areas have in common with industry the production of that certain products. However, they are usually handmade and not produced in an industrial process. In addition, dentistry is a great deal of art and judgement and quality control of these factors may be difficult. In this paper, I will focus on forensic odontology. What are the problems? What can we do and cannot do? In addition, how can we assure the quality of the work, the assessment and conclusion, and the report? I have some personal opinions on that and I will give some suggestions. Quality assurance on an international level is difficult. Conditions and juridical systems are different in different countries. Especially forensic odontologists are different and have different opinions. This presentation will be relevant to the ongoing discussion and attempts at revising the IOFOS' guidelines for quality assurance.

Multi-parameter measurements using optical fibre long period gratings for indoor air quality monitoring

NASA Astrophysics Data System (ADS)

Hromadka, J.; Korposh, S.; Partridge, M. C.; James, S.; Davis, F.; Crump, D.; Lee, S.-W.; Tatam, R. P.

2017-04-01

An array of three long period gratings (LPGs) fabricated in a single optical fibre and multiplexed in the wavelength domain was used to measure simultaneously temperature, relative humidity (RH) and volatile organic compounds (VOCs). Each LPG sensor was designed to optimize its response to a desired measurand. The LPGs were fabricated with periods such that they operated at or near the phase matching turning point. The sensors were calibrated in the laboratory and the simultaneous measurement of the key indoor air quality parameters was undertaken in laboratory and office environments. It was demonstrated successfully that the data produced by the LPG sensor array under real conditions was in a good agreement with that produced by commercially available sensors. Further, the potential application of fibre optic sensors for VOCs detection at high levels has been demonstrated.

Development of Real Time Implementation of 5/5 Rule based Fuzzy Logic Controller Shunt Active Power Filter for Power Quality Improvement

NASA Astrophysics Data System (ADS)

Puhan, Pratap Sekhar; Ray, Pravat Kumar; Panda, Gayadhar

2016-12-01

This paper presents the effectiveness of 5/5 Fuzzy rule implementation in Fuzzy Logic Controller conjunction with indirect control technique to enhance the power quality in single phase system, An indirect current controller in conjunction with Fuzzy Logic Controller is applied to the proposed shunt active power filter to estimate the peak reference current and capacitor voltage. Current Controller based pulse width modulation (CCPWM) is used to generate the switching signals of voltage source inverter. Various simulation results are presented to verify the good behaviour of the Shunt active Power Filter (SAPF) with proposed two levels Hysteresis Current Controller (HCC). For verification of Shunt Active Power Filter in real time, the proposed control algorithm has been implemented in laboratory developed setup in dSPACE platform.

Improving iris recognition performance using segmentation, quality enhancement, match score fusion, and indexing.

PubMed

Vatsa, Mayank; Singh, Richa; Noore, Afzel

2008-08-01

This paper proposes algorithms for iris segmentation, quality enhancement, match score fusion, and indexing to improve both the accuracy and the speed of iris recognition. A curve evolution approach is proposed to effectively segment a nonideal iris image using the modified Mumford-Shah functional. Different enhancement algorithms are concurrently applied on the segmented iris image to produce multiple enhanced versions of the iris image. A support-vector-machine-based learning algorithm selects locally enhanced regions from each globally enhanced image and combines these good-quality regions to create a single high-quality iris image. Two distinct features are extracted from the high-quality iris image. The global textural feature is extracted using the 1-D log polar Gabor transform, and the local topological feature is extracted using Euler numbers. An intelligent fusion algorithm combines the textural and topological matching scores to further improve the iris recognition performance and reduce the false rejection rate, whereas an indexing algorithm enables fast and accurate iris identification. The verification and identification performance of the proposed algorithms is validated and compared with other algorithms using the CASIA Version 3, ICE 2005, and UBIRIS iris databases.

A Korean survey on qualities and definition of a good psychiatrist.

PubMed

Kim, Ji Hyun; Tor, Phern-Chern; King, Joel; Seo, Jeong Seok

2015-05-01

The definition of a "good" psychiatrist has varied over the past decades due to changing roles of psychiatrists. Studies on the qualities of "good" psychiatrists have been completed in many countries. However, no such study has been undertaken in Korea. In Korea, recent growing interest in psychiatry demands the identification of qualities for a good psychiatrist. The purpose of this study was to define the qualities of a good psychiatrist in Korea, subsequently facilitating the improvement of psychiatric training programs. The questionnaire was based on a Singaporean survey with the permission from the original authors. Respondents were divided into patient group and psychiatrist group. The 40-item questionnaire contained items grouped into four themes: Professional, Personal Values, Academic Executive and Relationship. Of the four themes, both patient and psychiatrist groups considered Professional as the most important, whereas Academic Executive as the least important. The mean scores for all items of each theme in the patient group were higher than those in the psychiatrist group, reflecting higher expectations for good psychiatrist in the patient group. Patients emphasized Relationship more than psychiatrists did. It is concluded that a good psychiatrist in Korea can be defined as "a good communicator and listener with a professional manner, who respects confidentiality and has good doctor-patient relationships."

Prevalence and impacts of poor sleep on quality of life and associated factors of good sleepers in a sample of older Chinese adults.

PubMed

Lo, Catherine M H; Lee, Paul H

2012-06-18

Sleep disturbance is a complex health problem in ageing global populations decreasing quality of life among many older people. Geographic, cultural, and ethnic differences in sleep patterns have been documented within and between Western and Asian populations. The aim of this study was to explore sleep problems among Hong Kong seniors by examining the prevalence of poor sleep quality, the relationship between sleep quality and health-related quality of life, and associated factors of good sleepers in different age groups. This cross-sectional study used convenience sampling and gathered data during face-to-face interviews. Older community-dwelling individuals (n = 301) were recruited in community centres in 2010. The Pittsburgh Sleep Quality Index and Medical Outcomes Study Short Form-36 were used to measure sleep quality and health-related quality of life. The Medical Outcomes Study Short Form-36 domain scores were compared between good and bad sleepers and between long and short sleepers using Hotelling's T-Square test. SF-36 domain scores were placed into a logistic regression model that controlled for significant demographic variables (gender, educational level, perceived health). Most (77.7%) participants were poor sleepers. Participants who had global Pittsburgh Sleep Quality Index scores <5 and slept ≥5.5 h/night had better health-related quality of life. Vitality, emotional role, physical functioning, and bodily pain domain scores were associated factors of good sleepers in different age groups. This study found a strong negative association between sleep deprivation (poor quality, short duration) and health-related quality of life. Associated factors for good sleep quality in later life differ among age groups in relation to universal age-related changes, and should be addressed by social policies and health-care programmes.

Aero-thermal Calibration of the NASA Glenn Icing Research Tunnel (2000 Tests)

NASA Technical Reports Server (NTRS)

Gonsalez, Jose C.; Arrington, E. Allen; Curry, Monroe R., III

2001-01-01

Aerothermal calibration measurements and flow quality surveys were made in the test section of the Icing Research Tunnel at the NASA Glenn Research Center. These surveys were made following major facility modifications including widening of the heat exchanger tunnel section, replacement of the heat exchanger, installation of new turning vanes, and installation of new fan exit guide vanes. Standard practice at NASA Glenn requires that test section calibration and flow quality surveys be performed following such major facility modifications. A single horizontally oriented rake was used to survey the flow field at several vertical positions within a single cross-sectional plane of the test section. These surveys provided a detailed mapping of the total and static pressure, total temperature, Mach number, velocity, flow angle and turbulence intensity. Data were acquired over the entire velocity and total temperature range of the facility. No icing conditions were tested; however, the effects of air sprayed through the water injecting spray bars were assessed. All data indicate good flow quality. Mach number standard deviations were less than 0.0017, flow angle standard deviations were between 0.3 deg and 0.8 deg, total temperature standard deviations were between 0.5 and 1.8 F for subfreezing conditions, axial turbulence intensities varied between 0.3 and 1.0 percent, and transverse turbulence intensities varied between 0.3 and 1.5 percent. Measurement uncertainties were also quantified.

Longitudinal surveys on effects of changes in road traffic noise: effects on sleep assessed by general questionnaires and 3-day sleep logs

NASA Astrophysics Data System (ADS)

Öhrström, E.

2004-09-01

Adverse health effects including sleep disturbances by road traffic noise were studied among inhabitants in a residential area near Västra Bräckevägen in Göteborg city, Sweden, in 1986 and 1987, before and after the introduction of night traffic regulations. The results of those studies showed a higher prevalence of sleep disturbances and poorer sleep quality in the exposed areas as compared with the control area. This paper presents results on sleep based on new studies done with general questionnaires and daily sleep logs for a period of 3 nights in 1997 and 1999 in the same areas, before and after the opening of a new tunnel for road traffic. At this time, road traffic had been substantially reduced from about 25 000 to 2 400 vehicles per 24 h and from 1375 to 180 vehicles per night (22-06). It is concluded from these long-term investigations that exposure to high levels of road traffic noise induces adverse effects on sleep and that sleep quality is significantly improved after an extensive noise reduction. Sleep quality assessed by a single general questionnaire may give equally good precision as daily reports on sleep over several days. Furthermore, a higher response rate is achieved by a single questionnaire.

Fully Disposable Manufacturing Concepts for Clinical and Commercial Manufacturing and Ballroom Concepts.

PubMed

Boedeker, Berthold; Goldstein, Adam; Mahajan, Ekta

2017-11-04

The availability and use of pre-sterilized disposables has greatly changed the methods used in biopharmaceuticals development and production, particularly from mammalian cell culture. Nowadays, almost all process steps from cell expansion, fermentation, cell removal, and purification to formulation and storage of drug substances can be carried out in disposables, although there are still limitations with single-use technologies, particularly in the areas of pretesting and quality control of disposables, bag and connections standardization and qualification, extractables and leachables (E/L) validation, and dependency on individual vendors. The current status of single-use technologies is summarized for all process unit operations using a standard mAb process as an example. In addition, current pros and cons of using disposables are addressed in a comparative way, including quality control and E/L validation.The continuing progress in developing single-use technologies has an important impact on manufacturing facilities, resulting in much faster, less expensive and simpler plant design, start-up, and operation, because cell culture process steps are no longer performed in hard-piped unit operations. This leads to simpler operations in a lab-like environment. Overall it enriches the current landscape of available facilities from standard hard-piped to hard-piped/disposables hybrid to completely single-use-based production plants using the current segregation and containment concept. At the top, disposables in combination with completely and functionally closed systems facilitate a new, revolutionary design of ballroom facilities without or with much less segregation, which enables us to perform good manufacturing practice manufacturing of different products simultaneously in unclassified but controlled areas.Finally, single-use processing in lab-like shell facilities is a big enabler of transferring and establishing production in emergent countries, and this is described in more detail in 7. Graphical Abstract.

Bulk vertical micromachining of single-crystal sapphire using inductively coupled plasma etching for x-ray resonant cavities

NASA Astrophysics Data System (ADS)

Chen, P.-C.; Lin, P.-T.; Mikolas, D. G.; Tsai, Y.-W.; Wang, Y.-L.; Fu, C.-C.; Chang, S.-L.

2015-01-01

To provide coherent x-ray sources for probing the dynamic structures of solid or liquid biological substances on the picosecond timescale, a high-aspect-ratio x-ray resonator cavity etched from a single crystal substrate with a nearly vertical sidewall structure is required. Although high-aspect-ratio resonator cavities have been produced in silicon, they suffer from unwanted multiple beam effects. However, this problem can be avoided by using the reduced symmetry of single-crystal sapphire in which x-ray cavities may produce a highly monochromatic transmitted x-ray beam. In this study, we performed nominal 100 µm deep etching and vertical sidewall profiles in single crystal sapphire using inductively coupled plasma (ICP) etching. The large depth is required to intercept a useful fraction of a stopped-down x-ray beam, as well as for beam clearance. An electroplated Ni hard mask was patterned using KMPR 1050 photoresist and contact lithography. The quality and performance of the x-ray cavity depended upon the uniformity of the cavity gap and therefore verticality of the fabricated vertical sidewall. To our knowledge, this is the first report of such deep, vertical etching of single-crystal sapphire. A gas mixture of Cl2/BCl3/Ar was used to etch the sapphire with process variables including BCl3 flow ratio and bias power. By etching for 540 min under optimal conditions, we obtained an x-ray resonant cavity with a depth of 95 µm, width of ~30 µm, gap of ~115 µm and sidewall profile internal angle of 89.5°. The results show that the etching parameters affected the quality of the vertical sidewall, which is essential for good x-ray resonant cavities.

Dendritic brushes under theta and poor solvent conditions

NASA Astrophysics Data System (ADS)

Gergidis, Leonidas N.; Kalogirou, Andreas; Charalambopoulos, Antonios; Vlahos, Costas

2013-07-01

The effects of solvent quality on the internal stratification of polymer brushes formed by dendron polymers up to third generation were studied by means of molecular dynamics simulations with Langevin thermostat. The distributions of polymer units, of the free ends, the radii of gyration, and the back folding probabilities of the dendritic spacers were studied at the macroscopic states of theta and poor solvent. For high grafting densities we observed a small decrease in the height of the brush as the solvent quality decreases. The internal stratification in theta solvent was similar to the one we found in good solvent, with two and in some cases three kinds of populations containing short dendrons with weakly extended spacers, intermediate-height dendrons, and tall dendrons with highly stretched spacers. The differences increase as the grafting density decreases and single dendron populations were evident in theta and poor solvent. In poor solvent at low grafting densities, solvent micelles, polymeric pinned lamellae, spherical and single chain collapsed micelles were observed. The scaling dependence of the height of the dendritic brush at high density brushes for both solvents was found to be in agreement with existing analytical results.

Optimizing Imaging Conditions for Demanding Multi-Color Super Resolution Localization Microscopy

PubMed Central

Nahidiazar, Leila; Agronskaia, Alexandra V.; Broertjes, Jorrit; van den Broek, Bram; Jalink, Kees

2016-01-01

Single Molecule Localization super-resolution Microscopy (SMLM) has become a powerful tool to study cellular architecture at the nanometer scale. In SMLM, single fluorophore labels are made to repeatedly switch on and off (“blink”), and their exact locations are determined by mathematically finding the centers of individual blinks. The image quality obtainable by SMLM critically depends on efficacy of blinking (brightness, fraction of molecules in the on-state) and on preparation longevity and labeling density. Recent work has identified several combinations of bright dyes and imaging buffers that work well together. Unfortunately, different dyes blink optimally in different imaging buffers, and acquisition of good quality 2- and 3-color images has therefore remained challenging. In this study we describe a new imaging buffer, OxEA, that supports 3-color imaging of the popular Alexa dyes. We also describe incremental improvements in preparation technique that significantly decrease lateral- and axial drift, as well as increase preparation longevity. We show that these improvements allow us to collect very large series of images from the same cell, enabling image stitching, extended 3D imaging as well as multi-color recording. PMID:27391487

Splitting Fermi Surfaces and Heavy Electronic States in Non-Centrosymmetric U3Ni3Sn4

NASA Astrophysics Data System (ADS)

Maurya, Arvind; Harima, Hisatomo; Nakamura, Ai; Shimizu, Yusei; Homma, Yoshiya; Li, DeXin; Honda, Fuminori; Sato, Yoshiki J.; Aoki, Dai

2018-04-01

We report the single-crystal growth of the non-centrosymmetric paramagnet U3Ni3Sn4 by the Bridgman method and the Fermi surface properties detected by de Haas-van Alphen (dHvA) experiments. We have also investigated single-crystal U3Ni3Sn4 by single-crystal X-ray diffraction, magnetization, electrical resistivity, and heat capacity measurements. The angular dependence of the dHvA frequencies reveals many closed Fermi surfaces, which are nearly spherical in topology. The experimental results are in good agreement with local density approximation (LDA) band structure calculations based on the 5f-itinerant model. The band structure calculation predicts many Fermi surfaces, mostly with spherical shape, derived from 12 bands crossing the Fermi energy. To our knowledge, the splitting of Fermi surfaces due to the non-centrosymmetric crystal in 5f-electron systems is experimentally detected for the first time. The temperature dependence of the dHvA amplitude reveals a large cyclotron effective mass of up to 35 m0, indicating the heavy electronic state of U3Ni3Sn4 due to the proximity of the quantum critical point. From the field dependence of the dHvA amplitude, a mean free path of conduction electrons of up to 1950 Å is detected, reflecting the good quality of the grown crystal. The small splitting energy related to the antisymmetric spin-orbit interaction is most likely due to the large cyclotron effective mass.

Performance characterization of a single bi-axial scanning MEMS mirror-based head-worn display

NASA Astrophysics Data System (ADS)

Liang, Minhua

2002-06-01

The NomadTM Personal Display System is a head-worn display (HWD) with a see-through, high-resolution, high-luminance display capability. It is based on a single bi-axial scanning MEMS mirror. In the Nomad HWD system, a red laser diode emits a beam of light that is scanned bi-axially by a single MEMS mirror. A diffractive beam diffuser and an ocular expand the beam to form a 12mm exit pupil for comfortable viewing. The Nomad display has an SVGA (800x600) resolution, 60Hz frame rate, 23-degree horizontal field of view (FOV) and 3:4 vertical to horizontal aspect ratio, a luminance of 800~900 foot-Lamberts, see-through capability, 30mm eye-relief distance, and 1-foot to infinity focusing adjustment. We have characterized the performance parameters, such as field of view, distortion, contrast ratio (4x4 black and white checker board), modulation depth, exit pupil size, eye relief distance, maximum luminance, dynamic range ratio (full-on-to-full-off ratio), dimming ratio, and luminance uniformity at image plane. The Class-1 eye-safety requirements per IEC 60825-1 Amendment 2 (CDRH Laser Notice No. 50) are analyzed and verified by experiments. The paper describes all of the testing methods and set-ups as well as the representative test results. The test results demonstrate that the Nomad display is an eye-safe display product with good image quality and good user ergonomics.

Single-Subject Evaluation: A Tool for Quality Assurance.

ERIC Educational Resources Information Center

Nuehring, Elane M.; Pascone, Anne B.

1986-01-01

The use of single-subject designs in peer review, in utilization review, and in other quality-assurance audits is encouraged. Presents an overview of the methodologies of single-subject designs and quality assurance, and provides examples of cases in which single-subject techniques furnished relevant quality assurance documentation. (Author/ABB)

Coronary CT angiography with single-source and dual-source CT: comparison of image quality and radiation dose between prospective ECG-triggered and retrospective ECG-gated protocols.

PubMed

Sabarudin, Akmal; Sun, Zhonghua; Yusof, Ahmad Khairuddin Md

2013-09-30

This study is conducted to investigate and compare image quality and radiation dose between prospective ECG-triggered and retrospective ECG-gated coronary CT angiography (CCTA) with the use of single-source CT (SSCT) and dual-source CT (DSCT). A total of 209 patients who underwent CCTA with suspected coronary artery disease scanned with SSCT (n=95) and DSCT (n=114) scanners using prospective ECG-triggered and retrospective ECG-gated protocols were recruited from two institutions. The image was assessed by two experienced observers, while quantitative assessment was performed by measuring the image noise, the signal-to-noise ratio (SNR) and the contrast-to-noise ratio (CNR). Effective dose was calculated using the latest published conversion coefficient factor. A total of 2087 out of 2880 coronary artery segments were assessable, with 98.0% classified as of sufficient and 2.0% as of insufficient image quality for clinical diagnosis. There was no significant difference in overall image quality between prospective ECG-triggered and retrospective gated protocols, whether it was performed with DSCT or SSCT scanners. Prospective ECG-triggered protocol was compared in terms of radiation dose calculation between DSCT (6.5 ± 2.9 mSv) and SSCT (6.2 ± 1.0 mSv) scanners and no significant difference was noted (p=0.99). However, the effective dose was significantly lower with DSCT (18.2 ± 8.3 mSv) than with SSCT (28.3 ± 7.0 mSv) in the retrospective gated protocol. Prospective ECG-triggered CCTA reduces radiation dose significantly compared to retrospective ECG-gated CCTA, while maintaining good image quality. Copyright © 2012 Elsevier Ireland Ltd. All rights reserved.

Improved Bi Film Wrapped Single Walled Carbon Nanotubes for Ultrasensitive Electrochemical Detection of Trace Cr(VI).

PubMed

Ouyang, Ruizhuo; Zhang, Wangyao; Zhou, Shilin; Xue, Zi-Ling; Xu, Lina; Gu, Yingying; Miao, Yuqing

2013-12-15

We report here the successful fabrication of an improved Bi film wrapped single walled carbon nanotubes modified glassy carbon electrode (Bi/SWNTs/GCE) as a highly sensitive platform for ultratrace Cr(VI) detection through catalytic adsorptive cathodic stripping voltammetry (AdCSV). The introduction of negatively charged SWNTs extraordinarily decreased the size of Bi particles to nanoscale due to electrostatic interaction which made Bi(III) cations easily attracted onto the surface of SWNTs in good order, leading to higher quality of Bi film deposition. The obtained Bi/SWNTs composite was well characterized with electrochemical impedance spectroscopy (EIS), scanning electron microscopy (SEM), the static water contact angle and the voltammetric measurements. The results demonstrates the improvements in the quality of Bi film deposited on the surface of SWNTs such as faster speed of electron transfer, more uniform and smoother morphology, better hydrophilicity and higher stripping signal. Using diethylene triaminepentaacetic acid (DTPA) as complexing ligand, the fabricated electrode displays a well-defined and highly sensitive peak for the reduction of Cr(III)-DTPA complex at -1.06 V ( vs . Ag/AgCl) with a linear concentration range of 0-25 nM and a fairly low detection limit of 0.036 nM. No interference was found in the presence of coexisting ions, and good recoveries were achieved for the analysis of a river sample. In comparison to previous approaches using Bi film modified GCE, the newly designed electrode exhibits better reproducibility and repeatability towards aqueous detection of trace Cr(VI) and appears to be very promising as the basis of a highly sensitive and selective voltammetric procedure for Cr(VI) detection at trace level in real samples.

Improved Bi Film Wrapped Single Walled Carbon Nanotubes for Ultrasensitive Electrochemical Detection of Trace Cr(VI)

PubMed Central

Zhou, Shilin; Xue, Zi-Ling; Xu, Lina; Gu, Yingying; Miao, Yuqing

2014-01-01

We report here the successful fabrication of an improved Bi film wrapped single walled carbon nanotubes modified glassy carbon electrode (Bi/SWNTs/GCE) as a highly sensitive platform for ultratrace Cr(VI) detection through catalytic adsorptive cathodic stripping voltammetry (AdCSV). The introduction of negatively charged SWNTs extraordinarily decreased the size of Bi particles to nanoscale due to electrostatic interaction which made Bi(III) cations easily attracted onto the surface of SWNTs in good order, leading to higher quality of Bi film deposition. The obtained Bi/SWNTs composite was well characterized with electrochemical impedance spectroscopy (EIS), scanning electron microscopy (SEM), the static water contact angle and the voltammetric measurements. The results demonstrates the improvements in the quality of Bi film deposited on the surface of SWNTs such as faster speed of electron transfer, more uniform and smoother morphology, better hydrophilicity and higher stripping signal. Using diethylene triaminepentaacetic acid (DTPA) as complexing ligand, the fabricated electrode displays a well-defined and highly sensitive peak for the reduction of Cr(III)-DTPA complex at −1.06 V (vs. Ag/AgCl) with a linear concentration range of 0–25 nM and a fairly low detection limit of 0.036 nM. No interference was found in the presence of coexisting ions, and good recoveries were achieved for the analysis of a river sample. In comparison to previous approaches using Bi film modified GCE, the newly designed electrode exhibits better reproducibility and repeatability towards aqueous detection of trace Cr(VI) and appears to be very promising as the basis of a highly sensitive and selective voltammetric procedure for Cr(VI) detection at trace level in real samples. PMID:24771881

Prognostic evaluation in obese patients using a dedicated multipinhole cadmium-zinc telluride SPECT camera.

PubMed

De Lorenzo, Andrea; Peclat, Thais; Amaral, Ana Carolina; Lima, Ronaldo S L

2016-02-01

The purpose of this study is to evaluate the prognostic value of myocardial perfusion SPECT obtained in CZT cameras (CZT-SPECT) with multipinhole collimation in obese patients. CZT-SPECT may be technically challenging in the obese, and its prognostic value remains largely unknown. Patients underwent single-day, rest/stress (supine and prone) imaging. Images were visually inspected and graded as poor, fair or good/excellent. Summed stress and difference scores (SSS and SDS, respectively) were converted into percentages of total perfusion defect and of ischemic defect by division by the maximum possible score. Obesity was defined as a body mass index (BMI) ≥ 30 kg/m(2) and classified as class I (BMI 30-34.9 kg/m(2)), II (BMI 35-39.9 kg/m(2)), or III (BMI ≥ 40 kg/m(2)). Patients were followed-up by telephone interview for the occurrence of all-cause death, myocardial infarction or revascularization. A Cox proportional hazards analysis was used to assess the independent predictors of death. Among 1396 patients, 365 (26.1 %) were obese (mean BMI 33.9 ± 3.6; 17.5 % class I, 3.4 % class II, and 3.4 % class III). Image quality was good/excellent in 94.5 % of the obese patients. The annualized mortality rates were not significantly different among obese and non-obese patients, being <1 % with normal CZT-SPECT, and increased with the degree of scan abnormality in both obese and non-obese patients. Age, the use of pharmacologic stress and an abnormal CZT-SPECT, but not obesity, were independent predictors of death. In obese patients, single-day rest/stress CZT-SPECT with a multipinhole camera provides prognostic discrimination with high image quality.

The effect on colon visualization during colonoscopy of the addition of simethicone to polyethylene glycol-electrolyte solution: a randomized single-blind study.

PubMed

Matro, Rebecca; Tupchong, Keegan; Daskalakis, Constantine; Gordon, Victoria; Katz, Leo; Kastenberg, David

2012-11-29

Colonic bubbles associated with polyethylene glycol-electrolyte solution (PEG-ELS) are common and obscure mucosal visualization. This study aimed to determine whether adding simethicone decreases the incidence of bubbles. Prospective, single-blind, randomized comparison of split dose PEG-ELS vs. PEG-ELS+simethicone (PEG-S) for outpatient colonoscopy. Bubble severity for colonic segments was assessed on withdrawal as A=no/minimal bubbles, B=moderate bubbles/interfere with detecting 5 mm polyp, C=severe bubbles/interfere with detecting 10 mm polyp. Primary end point was Grade B or C bubbles in any colon segment. Secondary end points were cleansing quality, incidence and severity of side effects, and polyp detection. One hundred and thirty nine patients enrolled; 13 withdrew before colonoscopy. Of 123 patients evaluated, 62 took PEG-S and 61 PEG-ELS. The incidence of grade B or C bubbles was much lower with PEG-S compared with PEG-ELS (2% vs. 38%; P=0.001). Overall cleansing (excellent or good) quality was not significantly different for either the whole colon (89% PEG-ELS, 94% of PEG-S, P=0.529) or right colon (88% PEG-ELS, 94% PEG-S, P=0.365). More PEG-S patients had excellent rather than good preps (whole colon 53% vs. 28%, P=0.004; right colon 53% vs. 35%, P=0.044). Need for any flushing was less with PEG-S (38% vs. 70%, P=0.001). The groups were not significantly different with respect to total procedure and withdrawal times, incidence or severity of side effects, or number of polyps/patient or adenomas/patient. Adding simethicone to PEG-ELS effectively eliminates bubbles, substantially reduces the need for flushing, and results in more excellent preparations.

The Effect on Colon Visualization During Colonoscopy of the Addition of Simethicone to Polyethylene Glycol-Electrolyte Solution: A Randomized Single-Blind Study

PubMed Central

Matro, Rebecca; Tupchong, Keegan; Daskalakis, Constantine; Gordon, Victoria; Katz, Leo; Kastenberg, David

2012-01-01

OBJECTIVES: Colonic bubbles associated with polyethylene glycol-electrolyte solution (PEG-ELS) are common and obscure mucosal visualization. This study aimed to determine whether adding simethicone decreases the incidence of bubbles. METHODS: Prospective, single-blind, randomized comparison of split dose PEG-ELS vs. PEG-ELS+simethicone (PEG-S) for outpatient colonoscopy. Bubble severity for colonic segments was assessed on withdrawal as A=no/minimal bubbles, B=moderate bubbles/interfere with detecting 5 mm polyp, C=severe bubbles/interfere with detecting 10 mm polyp. Primary end point was Grade B or C bubbles in any colon segment. Secondary end points were cleansing quality, incidence and severity of side effects, and polyp detection. RESULTS: One hundred and thirty nine patients enrolled; 13 withdrew before colonoscopy. Of 123 patients evaluated, 62 took PEG-S and 61 PEG-ELS. The incidence of grade B or C bubbles was much lower with PEG-S compared with PEG-ELS (2% vs. 38% P=0.001). Overall cleansing (excellent or good) quality was not significantly different for either the whole colon (89% PEG-ELS, 94% of PEG-S, P=0.529) or right colon (88% PEG-ELS, 94% PEG-S, P=0.365). More PEG-S patients had excellent rather than good preps (whole colon 53% vs. 28%, P=0.004; right colon 53% vs. 35%, P=0.044). Need for any flushing was less with PEG-S (38% vs. 70%, P=0.001). The groups were not significantly different with respect to total procedure and withdrawal times, incidence or severity of side effects, or number of polyps/patient or adenomas/patient. CONCLUSIONS: Adding simethicone to PEG-ELS effectively eliminates bubbles, substantially reduces the need for flushing, and results in more excellent preparations. PMID:23238113

How Good Are Statistical Models at Approximating Complex Fitness Landscapes?

PubMed Central

du Plessis, Louis; Leventhal, Gabriel E.; Bonhoeffer, Sebastian

2016-01-01

Fitness landscapes determine the course of adaptation by constraining and shaping evolutionary trajectories. Knowledge of the structure of a fitness landscape can thus predict evolutionary outcomes. Empirical fitness landscapes, however, have so far only offered limited insight into real-world questions, as the high dimensionality of sequence spaces makes it impossible to exhaustively measure the fitness of all variants of biologically meaningful sequences. We must therefore revert to statistical descriptions of fitness landscapes that are based on a sparse sample of fitness measurements. It remains unclear, however, how much data are required for such statistical descriptions to be useful. Here, we assess the ability of regression models accounting for single and pairwise mutations to correctly approximate a complex quasi-empirical fitness landscape. We compare approximations based on various sampling regimes of an RNA landscape and find that the sampling regime strongly influences the quality of the regression. On the one hand it is generally impossible to generate sufficient samples to achieve a good approximation of the complete fitness landscape, and on the other hand systematic sampling schemes can only provide a good description of the immediate neighborhood of a sequence of interest. Nevertheless, we obtain a remarkably good and unbiased fit to the local landscape when using sequences from a population that has evolved under strong selection. Thus, current statistical methods can provide a good approximation to the landscape of naturally evolving populations. PMID:27189564

Effect of fluoroscopic X-ray beam spectrum on air-kerma measurement accuracy: implications for establishing correction coefficients on interventional fluoroscopes with KAP meters.

PubMed

Wunderle, Kevin A; Rakowski, Joseph T; Dong, Frank F

2016-05-08

The first goal of this study was to investigate the accuracy of the displayed reference plane air kerma (Ka,r) or air kerma-area product (Pk,a) over a broad spectrum of X-ray beam qualities on clinically used interventional fluoroscopes incorporating air kerma-area product meters (KAP meters) to measure X-ray output. The second goal was to investigate the accuracy of a correction coefficient (CC) determined at a single beam quality and applied to the measured Ka,r over a broad spectrum of beam qualities. Eleven state-of-the-art interventional fluoroscopes were evaluated, consisting of eight Siemens Artis zee and Artis Q systems and three Philips Allura FD systems. A separate calibrated 60 cc ionization chamber (external chamber) was used to determine the accuracy of the KAP meter over a broad range of clinically used beam qualities. For typical adult beam qualities, applying a single CC deter-mined at 100 kVp with copper (Cu) in the beam resulted in a deviation of < 5% due to beam quality variation. This result indicates that applying a CC determined using The American Association of Physicists in Medicine Task Group 190 protocol or a similar protocol provides very good accuracy as compared to the allowed ± 35% deviation of the KAP meter in this limited beam quality range. For interventional fluoroscopes dedicated to or routinely used to perform pediatric interventions, using a CC established with a low kVp (~ 55-60 kVp) and large amount of Cu filtration (~ 0.6-0.9 mm) may result in greater accuracy as compared to using the 100 kVp values. KAP meter responses indicate that fluoroscope vendors are likely normalizing or otherwise influencing the KAP meter output data. Although this may provide improved accuracy in some instances, there is the potential for large discrete errors to occur, and these errors may be difficult to identify.

Comparison of myocardial perfusion imaging between the new high-speed gamma camera and the standard anger camera.

PubMed

Tanaka, Hirokazu; Chikamori, Taishiro; Hida, Satoshi; Uchida, Kenji; Igarashi, Yuko; Yokoyama, Tsuyoshi; Takahashi, Masaki; Shiba, Chie; Yoshimura, Mana; Tokuuye, Koichi; Yamashina, Akira

2013-01-01

Cadmium-zinc-telluride (CZT) solid-state detectors have been recently introduced into the field of myocardial perfusion imaging. The aim of this study was to prospectively compare the diagnostic performance of the CZT high-speed gamma camera (Discovery NM 530c) with that of the standard 3-head gamma camera in the same group of patients. The study group consisted of 150 consecutive patients who underwent a 1-day stress-rest (99m)Tc-sestamibi or tetrofosmin imaging protocol. Image acquisition was performed first on a standard gamma camera with a 15-min scan time each for stress and for rest. All scans were immediately repeated on a CZT camera with a 5-min scan time for stress and a 3-min scan time for rest, using list mode. The correlations between the CZT camera and the standard camera for perfusion and function analyses were strong within narrow Bland-Altman limits of agreement. Using list mode analysis, image quality for stress was rated as good or excellent in 97% of the 3-min scans, and in 100% of the ≥4-min scans. For CZT scans at rest, similarly, image quality was rated as good or excellent in 94% of the 1-min scans, and in 100% of the ≥2-min scans. The novel CZT camera provides excellent image quality, which is equivalent to standard myocardial single-photon emission computed tomography, despite a short scan time of less than half of the standard time.

Overview of groundwater sources and water-supply systems, and associated microbial pollution, in Finland, Norway and Iceland

NASA Astrophysics Data System (ADS)

Kløve, Bjørn; Kvitsand, Hanne Margrethe Lund; Pitkänen, Tarja; Gunnarsdottir, Maria J.; Gaut, Sylvi; Gardarsson, Sigurdur M.; Rossi, Pekka M.; Miettinen, Ilkka

2017-06-01

The characteristics of groundwater systems and groundwater contamination in Finland, Norway and Iceland are presented, as they relate to outbreaks of disease. Disparities among the Nordic countries in the approach to providing safe drinking water from groundwater are discussed, and recommendations are given for the future. Groundwater recharge is typically high in autumn or winter months or after snowmelt in the coldest regions. Most inland aquifers are unconfined and therefore vulnerable to pollution, but they are often without much anthropogenic influence and the water quality is good. In coastal zones, previously emplaced marine sediments may confine and protect aquifers to some extent. However, the water quality in these aquifers is highly variable, as the coastal regions are also most influenced by agriculture, sea-water intrusion and urban settlements resulting in challenging conditions for water abstraction and supply. Groundwater is typically extracted from Quaternary deposits for small and medium municipalities, from bedrock for single households, and from surface water for the largest cities, except for Iceland, which relies almost entirely on groundwater for public supply. Managed aquifer recharge, with or without prior water treatment, is widely used in Finland to extend present groundwater resources. Especially at small utilities, groundwater is often supplied without treatment. Despite generally good water quality, microbial contamination has occurred, principally by norovirus and Campylobacter, with larger outbreaks resulting from sewage contamination, cross-connections into drinking water supplies, heavy rainfall events, and ingress of polluted surface water to groundwater.

Indoor Air Quality in Schools: Clean Air Is Good Business.

ERIC Educational Resources Information Center

Guarneiri, Michele A.

2003-01-01

Describes the effect of poor indoor air quality (IAQ) on student health, the cost of safeguarding good IAQ, the cause of poor IAQ in schools, how to tell whether a school has an IAQ problem, and how the U.S. Environmental Protection Agency can help schools improve indoor air quality though the use of their free "Indoor Air Quality Tools for…

Poor tap water quality experiences and poor sleep quality during the Flint, Michigan Municipal Water Crisis.

PubMed

Kruger, Daniel J; Kodjebacheva, Gergana D; Cupal, Suzanne

2017-08-01

After inadequate official response to community concerns over water quality following changes in Flint's municipal water supply, this study sought evidence for a relationship between water quality and community mental health. The Speak to Your Health Community Survey is a community-based participatory component of the health surveillance system in Genesee County, Michigan. This cross-sectional survey recruits participants from every residential Census Tract of the county and strives for demographic representativeness. Respondents (n=834) rated their tap water quality (taste, smell, appearance) as poor (36%), fair (18%), good (20%), very good (17%), and excellent (10%). They rated their sleep quality as poor (12%), fair (28%), good (39%), very good (18%), and excellent (4%), and had an average (SD) sleep length of 408(90) minutes. Controlling for age, sex, years of education, and whether respondents were African American and Hispanic/Latino/a, lower perceived tap water quality was associated with lower sleep quality and shorter sleep length. Results indicate that adverse health conditions related to the water crisis extend beyond lead poisoning in children and include deterioration of sleep conditions among adult residents. Copyright © 2017 National Sleep Foundation. Published by Elsevier Inc. All rights reserved.

Micro pulling down growth of very thin shape memory alloys single crystals

NASA Astrophysics Data System (ADS)

López-Ferreño, I.; Juan, J. San; Breczewski, T.; López, G. A.; Nó, M. L.

Shape memory alloys (SMAs) have attracted much attention in the last decades due to their thermo-mechanical properties such as superelasticity and shape memory effect. Among the different families of SMAs, Cu-Al-Ni alloys exhibit these properties in a wide range of temperatures including the temperature range of 100-200∘C, where there is a technological demand of these functional materials, and exhibit excellent behavior at small scale making them more competitive for applications in Micro Electro-Mechanical Systems (MEMS). However, polycrystalline alloys of Cu-based SMAs are very brittle so that they show their best thermo-mechanical properties in single-crystal state. Nowadays, conventional Bridgman and Czochralski methods are being applied to elaborate single-crystal rods up to a minimum diameter of 1mm, but no works have been reported for smaller diameters. With the aim of synthesizing very thin single-crystals, the Micro-Pulling Down (μ-PD) technique has been applied, for which the capillarity and surface tension between crucible and the melt play a critical role. The μ-PD method has been successfully applied to elaborate several cylindrical shape thin single-crystals down to 200μm in diameter. Finally, the martensitic transformation, which is responsible for the shape memory properties of these alloys, has been characterized for different single-crystals. The experimental results evidence the good quality of the grown single-crystals.

[Identification of Good-Practice Projects in Promoting Physical Activity - Methods, Pitfalls and Sampled Outcomes].

PubMed

Henn, Annette; Karger, Claudia; Wöhlken, Katrin; Meier, Diana; Ungerer-Röhrich, Ulrike; Graf, Christine; Woll, Alexander

2017-03-01

The aim of this paper is to identify and show examples of good practice of public health promotion. For this, uniform quality criteria were worked out under consideration of national and international scientific literature.For the identification of examples of good practice, a comparison of different quality criteria was carried out and combined with each other in a first step. In the following step, examples of good practice were identified after a comprehensive search. The choice of the "good-practice" projects is exemplary and lays no claim to completeness.6 main quality criteria (QC) of programs promoting physical activity could be identified in the national and international context. The analysis showed altogether 10 projects which can exemplarily be classified as examples of good practice of the target groups of children and teenagers, adults, older people and people with pre-existing illnesses. These projects, however, show major differences in their (methodological) quality.The analysis reports a lack of "Good-Practice" examples. Deficits lie mainly in documentation and sustainability. Because of incomplete documentation, an assessment as a "Good-Practice" example is only possible to a limited extent; a lot of information, particularly in the evaluation, is missing. © Georg Thieme Verlag KG Stuttgart · New York.

Comparative analysis of multiple representative components in the herb pair Astragali Radix-Curcumae Rhizoma and its single herbs by UPLC-QQQ-MS.

PubMed

Yin, Gang; Cheng, Xiaolan; Tao, Weiwei; Dong, Yu; Bian, Yong; Zang, Wenhua; Tang, Decai

2018-01-30

The herb-pair, Astragali Radix (AR) and Curcumae Rhizoma (CR), often occurs in traditional herbal prescriptions used for cancer treatment in Asian areas. In clinical application, the AR-CR herb pair was often produced by different preparation methods or with raw materials from different sources, which raised a challenge for quality control of the herb-pair medicines. In this paper, ultra high performance liquid chromatography coupled to triple quadrupole tandem mass spectrometry method (UPLC-QQQ-MS) was applied for the first time to simultaneously determine 17 main bioactive components for quality control of AR-CR herb pair. The chromatographic separation was studied on an ACQUITY UPLC BEH C 18 column (100mm×2.1mm, 1.7μm) with a mobile phase composed of 0.1% aqueous formic acid and acetonitrile using a gradient elution in 12min. The proposed method was optimized and validated by good linearity (r 2 >0.9970), limit of detection (0.33-10.78ng/mL), limit of quantification (0.81-2.54ng/mL), intra- and inter-day precisions (RSD≤3.64%, RSD≤5.68%), stability (RSD≤4.29%), repeatability (RSD≤5.98%), recovery (90.20-107.60%). The established method was successfully applied to comparative analysis of main bioactive components in AR-CR herb pair and its single herbs, and quality evaluation of different batches of clinical dispensing granules. Compared to the single herb, the content of most liposoluble constituents such as curcumenol, curdione, isocurcumenol, furanodienone, curcumol, and germacrone were remarkable increased in their herb pair, suggesting mixed preparation produced synergistic effects on promoting the extraction of bioactive ingredients. This study is the first time to report the rapid and simultaneous analysis of 17 compounds in AR-CR herb pair by UPLC-QQQ-MS, and provides a feasible method for holistic quality control of preparations containing AR-CR herb-pair. Copyright © 2017 Elsevier B.V. All rights reserved.

"Parisara": Developing a Collaborative, Free, Public Domain Knowledge Resource on Indian Environment

ERIC Educational Resources Information Center

Gadgil, Madhav

2012-01-01

To address the important challenge of taking good care of India's environment, substantial, good quality information is crucial. Unfortunately, pertinent information is in very short supply. Much of the nationally collected information lacks quality and is incomplete. Modern science has demonstrated that good information flows from an open,…

Teacher Quality. Education Policy White Paper

ERIC Educational Resources Information Center

Wilson, Suzanne, Ed.

2009-01-01

Good teaching matters. There is persuasive evidence that students benefit from high quality instruction and that these benefits are cumulative for students who have good teachers for several years. Teacher effectiveness matters so much that low-income students lucky enough to have three very good teachers in a row in elementary school earn test…

Information presentation features and comprehensibility of hospital report cards: design analysis and online survey among users.

PubMed

Sander, Uwe; Emmert, Martin; Dickel, Jochen; Meszmer, Nina; Kolb, Benjamin

2015-03-16

Improving the transparency of information about the quality of health care providers is one way to improve health care quality. It is assumed that Internet information steers patients toward better-performing health care providers and will motivate providers to improve quality. However, the effect of public reporting on hospital quality is still small. One of the reasons is that users find it difficult to understand the formats in which information is presented. We analyzed the presentation of risk-adjusted mortality rate (RAMR) for coronary angiography in the 10 most commonly used German public report cards to analyze the impact of information presentation features on their comprehensibility. We wanted to determine which information presentation features were utilized, were preferred by users, led to better comprehension, and had similar effects to those reported in evidence-based recommendations described in the literature. The study consisted of 5 steps: (1) identification of best-practice evidence about the presentation of information on hospital report cards; (2) selection of a single risk-adjusted quality indicator; (3) selection of a sample of designs adopted by German public report cards; (4) identification of the information presentation elements used in public reporting initiatives in Germany; and (5) an online panel completed an online questionnaire that was conducted to determine if respondents were able to identify the hospital with the lowest RAMR and if respondents' hospital choices were associated with particular information design elements. Evidence-based recommendations were made relating to the following information presentation features relevant to report cards: evaluative table with symbols, tables without symbols, bar charts, bar charts without symbols, bar charts with symbols, symbols, evaluative word labels, highlighting, order of providers, high values to indicate good performance, explicit statements of whether high or low values indicate good performance, and incomplete data ("N/A" as a value). When investigating the RAMR in a sample of 10 hospitals' report cards, 7 of these information presentation features were identified. Of these, 5 information presentation features improved comprehensibility in a manner reported previously in literature. To our knowledge, this is the first study to systematically analyze the most commonly used public reporting card designs used in Germany. Best-practice evidence identified in international literature was in agreement with 5 findings about German report card designs: (1) avoid tables without symbols, (2) include bar charts with symbols, (3) state explicitly whether high or low values indicate good performance or provide a "good quality" range, (4) avoid incomplete data (N/A given as a value), and (5) rank hospitals by performance. However, these findings are preliminary and should be subject of further evaluation. The implementation of 4 of these recommendations should not present insurmountable obstacles. However, ranking hospitals by performance may present substantial difficulties.

Collinearly-improved BK evolution meets the HERA data

DOE PAGES

Iancu, E.; Madrigal, J. D.; Mueller, A. H.; ...

2015-10-03

In a previous publication, we have established a collinearly-improved version of the Balitsky–Kovchegov (BK) equation, which resums to all orders the radiative corrections enhanced by large double transverse logarithms. Here, we study the relevance of this equation as a tool for phenomenology, by confronting it to the HERA data. To that aim, we first improve the perturbative accuracy of our resummation, by including two classes of single-logarithmic corrections: those generated by the first non-singular terms in the DGLAP splitting functions and those expressing the one-loop running of the QCD coupling. The equation thus obtained includes all the next-to-leading order correctionsmore » to the BK equation which are enhanced by (single or double) collinear logarithms. Furthermore, we then use numerical solutions to this equation to fit the HERA data for the electron–proton reduced cross-section at small Bjorken x. We obtain good quality fits for physically acceptable initial conditions. Our best fit, which shows a good stability up to virtualities as large as Q 2 = 400 GeV 2 for the exchanged photon, uses as an initial condition the running-coupling version of the McLerran–Venugopalan model, with the QCD coupling running according to the smallest dipole prescription.« less

A Multicentre Audit of Single-Use Surgical Instruments (SUSI) for Tonsillectomy and Adenoidectomy

PubMed Central

O'Flynn, P; Silva, S; Kothari, P; Persaud, R

2007-01-01

INTRODUCTION Prions are resistant to conventional sterilisation procedures and, therefore, could be transmitted iatrogenically through re-usable adenoid and tonsil surgical instruments. Using disposable instruments would avoid the risk of transmission. We present the results of a complete audit loop using BBraun single-use surgical instruments (SUSI). PATIENTS AND METHODS This was a prospective multicentre audit. Surgeons were asked to fill in a standardised questionnaire recording details including postoperative complications, and evaluation of each piece of equipment compared with their own experience of conventional re-usable instruments. In the first cycle, constructive criticisms of the instruments were noted and the manufacturers modified the instruments accordingly. A second cycle of audit was subsequently undertaken. RESULTS A total of 86 patients were audited in the first cycle and 97 in the second cycle. Postoperative haemorrhage rate for both cycles was well within acceptable range. In the first audit cycle, surgeons generally found the Draffin rods, Boyle-Davis gag and bipolar diathermy forceps of poor quality and difficult to use. These were redesigned and, on repeat evaluation during the second audit cycle, were found to be just as good, if not better, than the re-usable instruments. CONCLUSIONS This study suggests that SUSI may be just as good as re-usable instruments. Furthermore, they may be more cost effective. PMID:18201478

High-power Broadband Organic THz Generator

PubMed Central

Jeong, Jae-Hyeok; Kang, Bong-Joo; Kim, Ji-Soo; Jazbinsek, Mojca; Lee, Seung-Heon; Lee, Seung-Chul; Baek, In-Hyung; Yun, Hoseop; Kim, Jongtaek; Lee, Yoon Sup; Lee, Jae-Hyeok; Kim, Jae-Ho; Rotermund, Fabian; Kwon, O-Pil

2013-01-01

The high-power broadband terahertz (THz) generator is an essential tool for a wide range of THz applications. Here, we present a novel highly efficient electro-optic quinolinium single crystal for THz wave generation. For obtaining intense and broadband THz waves by optical-to-THz frequency conversion, a quinolinium crystal was developed to fulfill all the requirements, which are in general extremely difficult to maintain simultaneously in a single medium, such as a large macroscopic electro-optic response and excellent crystal characteristics including a large crystal size with desired facets, good environmental stability, high optical quality, wide transparency range, and controllable crystal thickness. Compared to the benchmark inorganic and organic crystals, the new quinolinium crystal possesses excellent crystal properties and THz generation characteristics with broader THz spectral coverage and higher THz conversion efficiency at the technologically important pump wavelength of 800 nm. Therefore, the quinolinium crystal offers great potential for efficient and gap-free broadband THz wave generation. PMID:24220234

Optical sensor based on a single CdS nanobelt.

PubMed

Li, Lei; Yang, Shuming; Han, Feng; Wang, Liangjun; Zhang, Xiaotong; Jiang, Zhuangde; Pan, Anlian

2014-04-23

In this paper, an optical sensor based on a cadmium sulfide (CdS) nanobelt has been developed. The CdS nanobelt was synthesized by the vapor phase transportation (VPT) method. X-Ray Diffraction (XRD) and Transmission Electron Microscopy (TEM) results revealed that the nanobelt had a hexagonal wurtzite structure of CdS and presented good crystal quality. A single nanobelt Schottky contact optical sensor was fabricated by the electron beam lithography (EBL) technique, and the device current-voltage results showed back-to-back Schottky diode characteristics. The photosensitivity, dark current and the decay time of the sensor were 4 × 10⁴, 31 ms and 0.2 pA, respectively. The high photosensitivity and the short decay time were because of the exponential dependence of photocurrent on the number of the surface charges and the configuration of the back to back Schottky junctions.

Vacuum-free laminated top electrode with conductive tapes for scalable manufacturing of efficient perovskite solar cells

DOE PAGES

Shao, Yuchuan; Wang, Qi; Dong, Qingfeng; ...

2015-06-25

The efficiency of organometal trihalide perovskites (OTP) solar cells have reached that parity of single crystal silicon, and its nature abundant raw material and solution-process capability promise a bright future for commercialization. However, the vacuum based techniques for metal electrode deposition and additional encapsulation layer increase the cost of the perovskite solar cells dramatically and impede their commercialization process. Here, we report a vacuum-free low temperature lamination technique to fabricate the top electrode by commercial conductive tapes (C-tape). The simple fabrication method yields good quality contact and high efficiency device of 12.7%. The C-tapes also encapsulated the devices effectively, resultingmore » in greatly improved device stability. As a result, the combination of lamination of electrodes and encapsulation layers into a single step significantly reduce the cost of device fabrication.« less

Nucleation kinetics, crystal growth and optical studies on lithium hydrogen oxalate monohydrate single crystal

NASA Astrophysics Data System (ADS)

Chandran, Senthilkumar; Paulraj, Rajesh; Ramasamy, P.

2017-06-01

Semi-organic lithium hydrogen oxalate monohydrate non-linear optical single crystals have been grown by slow evaporation solution technique at 40 °C. The nucleation parameters such as critical radius, interfacial tension, and critical free energy change have been evaluated using the experimental data. The solubility and the nucleation curve of the crystal at different temperatures have been analyzed. The crystal has a positive temperature coefficient of solubility. The metastable zone width and induction period have been determined for the aqueous solution growth of lithium hydrogen oxalate monohydrate. The UV-vis-NIR spectrum showed this crystal has high transparency. The photoconductivity studies indicate lithium hydrogen oxalate monohydrate has positive photoconductivity behaviour. The low etch pit density observed on (0 0 1) crystal surface and the high resolution x-ray difraction analysis indicate the good quality of the grown crystals

High-power broadband organic THz generator.

PubMed

Jeong, Jae-Hyeok; Kang, Bong-Joo; Kim, Ji-Soo; Jazbinsek, Mojca; Lee, Seung-Heon; Lee, Seung-Chul; Baek, In-Hyung; Yun, Hoseop; Kim, Jongtaek; Lee, Yoon Sup; Lee, Jae-Hyeok; Kim, Jae-Ho; Rotermund, Fabian; Kwon, O-Pil

2013-11-13

The high-power broadband terahertz (THz) generator is an essential tool for a wide range of THz applications. Here, we present a novel highly efficient electro-optic quinolinium single crystal for THz wave generation. For obtaining intense and broadband THz waves by optical-to-THz frequency conversion, a quinolinium crystal was developed to fulfill all the requirements, which are in general extremely difficult to maintain simultaneously in a single medium, such as a large macroscopic electro-optic response and excellent crystal characteristics including a large crystal size with desired facets, good environmental stability, high optical quality, wide transparency range, and controllable crystal thickness. Compared to the benchmark inorganic and organic crystals, the new quinolinium crystal possesses excellent crystal properties and THz generation characteristics with broader THz spectral coverage and higher THz conversion efficiency at the technologically important pump wavelength of 800 nm. Therefore, the quinolinium crystal offers great potential for efficient and gap-free broadband THz wave generation.

Composite germanium monochromators - Results for the TriCS single-crystal diffractometer at SINQ

NASA Astrophysics Data System (ADS)

Schefer, J.; Fischer, S.; Böhm, M.; Keller, L.; Horisberger, M.; Medarde, M.; Fischer, P.

Composite germanium monochromators are foremost in application in neutron diffraction due to their good scattering properties, low absorption values and the diamond structure which avoids second-order contamination when using hhk reflections (all odd). Our slices for the monochromator are built from 24 wafers, each 0.4 mm thick. The alignment of the wafers within the final composite wafer package has been improved by adding tin for the soldering process with a sputtering method instead of foils. Nine slices, each 12.5 mm high, are mounted on separate miniature goniometer heads to the focusing monochromator. The focusing angle is controlled by only one motor/digitizer by using a sophisticated mechanism. Turning the monochromator by 9° around overlineω allow access of the 311 (primary) and 511 (secondary) reflection. We also show the importance of permanent quality control with neutrons. The monochromator will be used on the single-crystal diffractometer TriCS at SINQ.

In situ X-ray measurements of MOVPE growth of InxGa1-xN single quantum wells

NASA Astrophysics Data System (ADS)

Ju, Guangxu; Fuchi, Shingo; Tabuchi, Masao; Takeda, Yoshikazu

2013-05-01

GaN/InxGa1-xN/GaN single quantum wells (SQWs) have been grown on c-plane GaN/sapphire substrates using MOVPE system. PL (photoluminescence) and AFM (atomic force microscope) measurements demonstrate good quality of after-growth thermal-annealed SQWs. In situ XRD (X-ray diffraction), XRR (X-ray reflectivity), and X-ray CTR (crystal truncation rod) scattering measurements were successfully conducted on the SQWs under the NH3+N2 ambient at 1103 K. The analysis results of the XRR and the X-ray CTR spectra at 1103 K and at 300 K on the same sample matched well. It demonstrated that In0.09Ga0.91N SQW structure with several ML (monolayer) InGaN thicknesses was successfully investigated using the XRR and CTR scattering measurements at 1103 K.

YouTube as a Potential Training Resource for Laparoscopic Fundoplication.

PubMed

Frongia, Giovanni; Mehrabi, Arianeb; Fonouni, Hamidreza; Rennert, Helga; Golriz, Mohammad; Günther, Patrick

To analyze the surgical proficiency and educational quality of YouTube videos demonstrating laparoscopic fundoplication (LF). In this cross-sectional study, a search was performed on YouTube for videos demonstrating the LF procedure. The surgical and educational proficiency was evaluated using the objective component rating scale, the educational quality rating score, and total video quality score. Statistical significance was determined by analysis of variance, receiver operating characteristic curve, and odds ratio analysis. A total of 71 videos were included in the study; 28 (39.4%) videos were evaluated as good, 23 (32.4%) were moderate, and 20 (28.2%) were poor. Good-rated videos were significantly longer (good, 22.0 ± 5.2min; moderate, 7.8 ± 0.9min; poor, 8.5 ± 1.0min; p = 0.007) and video duration was predictive of good quality (AUC, 0.672 ± 0.067; 95% CI: 0.541-0.802; p = 0.015). For good quality, the cut-off video duration was 7:42 minute. This cut-off value had a sensitivity of 67.9%, a specificity of 60.5%, and an odds ratio of 3.23 (95% CI: 1.19-8.79; p = 0.022) in predicting good quality. Videos uploaded from industrial sources and with a higher views/days online ratio had a higher objective component rating scale and total video quality score. In contrast, the likes/dislikes ratio was not predictive of video quality. Many videos showing the LF procedure have been uploaded to YouTube with varying degrees of quality. A process for filtering LF videos with high surgical and educational quality is feasible by evaluating the video duration, uploading source, and the views/days online ratio. However, alternative videos platforms aimed at professionals should also be considered for educational purposes. Copyright © 2016 Association of Program Directors in Surgery. Published by Elsevier Inc. All rights reserved.

Studies on the InAlN/InGaN/InAlN/InGaN double channel heterostructures with low sheet resistance

NASA Astrophysics Data System (ADS)

Zhang, Yachao; Wang, Zhizhe; Xu, Shengrui; Chen, Dazheng; Bao, Weimin; Zhang, Jinfeng; Zhang, Jincheng; Hao, Yue

2017-11-01

High quality InAlN/InGaN/InAlN/InGaN double channel heterostructures were proposed and grown by metal organic chemical vapor deposition. Benefiting from the adoption of the pulsed growth method and Two-Step AlN interlayer, the material quality and interface characteristics of the double channel heterostructures are satisfactory. The results of the temperature-dependent Hall effect measurement indicated that the transport properties of the double channel heterostructures were superior to those of the traditional single channel heterostructures in the whole test temperature range. Meanwhile, the sheet resistance of the double channel heterostructures reached 218.5 Ω/□ at 300 K, which is the record of InGaN-based heterostructures. The good transport properties of the InGaN double channel heterostructures are beneficial to improve the performance of the microwave power devices based on nitride semiconductors.

A design strategy of the circular photonic crystal fiber supporting good quality orbital angular momentum mode transmission

NASA Astrophysics Data System (ADS)

Zhang, Hu; Zhang, Xiaoguang; Li, Hui; Deng, Yifan; Zhang, Xia; Xi, Lixia; Tang, Xianfeng; Zhang, Wenbo

2017-08-01

Based on 5 requirements which are essential for stable OAM mode transmission, we propose an OAM fiber family based on a structure of circular photonic crystal fiber (C-PCF). The proposed C-PCF in the family is made of pure silica, with a big round air hole at the center, several rings of air-hole array as the cladding, and a ring shaped silica area in between as the core where the OAM modes propagate. We also provide a design strategy with which the optimized C-PCF can be obtained with optimum number of high quality OAM modes (up to 42 OAM modes), large effective index separation for corresponding vector modes over a wide bandwidth, relative small and flat dispersion, and low nonlinear coefficient compared with a conventional single mode fiber. The designed fiber can be used in MDM communications and other OAM applications in fibers.

[Lung transplantation.].

PubMed

Guðmundsson, G

2000-09-01

Lung transplantation is an option in the treatment of end stage lung diseases, excluding lung cancer, that lead to short life expectancy and poor quality of life. Now they are mostly limited by shortage of donor organs and longterm complications. They are used for various lung diseases such as pulmonary vascular diseases, fibrosing diseases, chronic obstructive pulmonary diseases and diseases that cause chronic infections. Depending on the indication it is possible to perform heart and lung transplantation, single lung or double lung transplantation.Indications, contraindications, surgical methods, immunosuppression, complications and outcomes will be discussed. Survival is not as good as for other solid organ transplantation. Measurement of pulmonary function and quality of life improve with lung transplantation. Bronchiolitis obliterans is the most common complication and is the most limiting factor. A few Icelanders have undergone lung transplantation, most of them in Gothenburg, Sweden. The future of lung transplantation depends on limiting the incidence of bronchiolitis obliterans and finding more organ donors.

College of American Pathologists Gynecologic Cytopathology Quality Consensus Conference on good laboratory practices in gynecologic cytology: background, rationale, and organization.

PubMed

Tworek, Joseph A; Henry, Michael R; Blond, Barbara; Jones, Bruce Allen

2013-02-01

Gynecologic cytopathology is a heavily regulated field, with Clinical Laboratory Improvement Amendments of 1988 mandating the collection of many quality metrics. There is a lack of consensus regarding methods to collect, monitor, and benchmark these data and how these data should be used in a quality assurance program. Furthermore, the introduction of human papilloma virus testing and proficiency testing has provided more data to monitor. To determine good laboratory practices in quality assurance of gynecologic cytopathology. Data were collected through a written survey consisting of 98 questions submitted to 1245 Clinical Laboratory Improvement Amendments-licensed or Department of Defense laboratories. There were 541 usable responses. Additional input was sought through a Web posting of results and questions on the College of American Pathologists Web site. Four senior authors who authored the survey and 28 cytopathologists and cytotechnologists were assigned to 5 working groups to analyze data and present statements on good laboratory practices in gynecologic cytopathology at the College of American Pathologists Gynecologic Cytopathology Quality Consensus Conference. Ninety-eight attendees at the College of American Pathologists Gynecologic Cytopathology Quality Consensus Conference discussed and voted on good laboratory practice statements to obtain consensus. This paper describes the rationale, background, process, and strengths and limitations of a series of papers that summarize good laboratory practice statements in quality assurance in gynecologic cytopathology.

Construction of the descriptive system for the assessment of quality of life AQoL-6D utility instrument

PubMed Central

2012-01-01

Background Multi attribute utility (MAU) instruments are used to include the health related quality of life (HRQoL) in economic evaluations of health programs. Comparative studies suggest different MAU instruments measure related but different constructs. The objective of this paper is to describe the methods employed to achieve content validity in the descriptive system of the Assessment of Quality of Life (AQoL)-6D, MAU instrument. Methods The AQoL program introduced the use of psychometric methods in the construction of health related MAU instruments. To develop the AQoL-6D we selected 112 items from previous research, focus groups and expert judgment and administered them to 316 members of the public and 302 hospital patients. The search for content validity across a broad spectrum of health states required both formative and reflective modelling. We employed Exploratory Factor Analysis and Structural Equation Modelling (SEM) to meet these dual requirements. Results and Discussion The resulting instrument employs 20 items in a multi-tier descriptive system. Latent dimension variables achieve sensitive descriptions of 6 dimensions which, in turn, combine to form a single latent QoL variable. Diagnostic statistics from the SEM analysis are exceptionally good and confirm the hypothesised structure of the model. Conclusions The AQoL-6D descriptive system has good psychometric properties. They imply that the instrument has achieved construct validity and provides a sensitive description of HRQoL. This means that it may be used with confidence for measuring health related quality of life and that it is a suitable basis for modelling utilities for inclusion in the economic evaluation of health programs. PMID:22507254

Construction of the descriptive system for the Assessment of Quality of Life AQoL-6D utility instrument.

PubMed

Richardson, Jeffrey R J; Peacock, Stuart J; Hawthorne, Graeme; Iezzi, Angelo; Elsworth, Gerald; Day, Neil A

2012-04-17

Multi attribute utility (MAU) instruments are used to include the health related quality of life (HRQoL) in economic evaluations of health programs. Comparative studies suggest different MAU instruments measure related but different constructs. The objective of this paper is to describe the methods employed to achieve content validity in the descriptive system of the Assessment of Quality of Life (AQoL)-6D, MAU instrument. The AQoL program introduced the use of psychometric methods in the construction of health related MAU instruments. To develop the AQoL-6D we selected 112 items from previous research, focus groups and expert judgment and administered them to 316 members of the public and 302 hospital patients. The search for content validity across a broad spectrum of health states required both formative and reflective modelling. We employed Exploratory Factor Analysis and Structural Equation Modelling (SEM) to meet these dual requirements. The resulting instrument employs 20 items in a multi-tier descriptive system. Latent dimension variables achieve sensitive descriptions of 6 dimensions which, in turn, combine to form a single latent QoL variable. Diagnostic statistics from the SEM analysis are exceptionally good and confirm the hypothesised structure of the model. The AQoL-6D descriptive system has good psychometric properties. They imply that the instrument has achieved construct validity and provides a sensitive description of HRQoL. This means that it may be used with confidence for measuring health related quality of life and that it is a suitable basis for modelling utilities for inclusion in the economic evaluation of health programs.

Strengthening radiopharmacy practice in IAEA Member States.

PubMed

Duatti, Adriano; Bhonsle, Uday

2013-05-01

Radiopharmaceuticals are essential components of nuclear medicine procedures. Without radiopharmaceuticals nuclear medicine procedures cannot be performed. Therefore it could be said that 'No radiopharmaceutical-no nuclear medicine.' A good radiopharmacy practice supports nuclear medicine activities by producing radiopharmaceuticals that are safe and are of the required quality in a consistent way. As with any medicinal product, radiopharmaceuticals are required to be produced under carefully controlled conditions and are tested for their quality, prior to the administration to patients, using validated standard operating procedures. These procedures are based on the principles of Good Manufacturing Practice (GMP). The GMP principles are based on scientific knowledge and applicable regulatory requirements and guidance related to radiopharmaceutical productions and use. The International Atomic Energy Agency (IAEA) is committed to promote, in the Member States (MS), a rational and practical approach for the implementation of GMP for compounding or manufacturing of diagnostic or therapeutic radiopharmaceuticals. To pursue this goal the IAEA has developed various mechanisms and collaborations with individual experts in the field and with relevant national and international institutions or organizations. IAEA's activities in promoting radiopharmaceutical science include commissioning expert advice in the form of publications on radiopharmaceutical production, quality control and usage, producing technical guidance on production and regulatory aspects related to new radiopharmaceuticals, creating guidance documentation for self or internal audits of radiopharmaceutical production facilities, producing guidance on implementation of Quality Management System and GMP in radiopharmacy, assisting in creation of specific radiopharmaceutical monographs for the International Pharmacopoeia, and developing radiopharmacy-related human resource capabilities in MS through individual and regional training courses and education programs. IAEA strongly supports development of clinical nuclear medicine services by assisting MS in setting up reliable Radiopharmaceutical production facilities for single photon emission computed tomography, positron emission tomography, and for therapeutic applications. Copyright © 2013 Elsevier Inc. All rights reserved.

The effect of thermal de-phasing on the beam quality of a high-power single-pass second harmonic generation

NASA Astrophysics Data System (ADS)

Sadat Hashemi, Somayeh; Ghavami Sabouri, Saeed; Khorsandi, Alireza

2018-04-01

We present a theoretical model in order to study the effect of a thermally loaded crystal on the quality of a second-harmonic (SH) beam generated in a high-power pumping regime. The model is provided based on using a particular structure of oven considered for MgO:PPsLT nonlinear crystal to compensate for the thermal de-phasing effect that as the pumping power reaches up to 50 W degrades the conversion efficiency and beam quality of the interacting beams. Hereupon, the quality of fundamental beam is involved in the modeling to investigate the final effect on the beam quality of generated SH beam. Beam quality evaluation is subsequently simulated using Hermite-Gaussian modal decomposition approach for a range of fundamental beam qualities varied from 1 to 3 and for different levels of input powers. To provide a meaningful comparison numerical simulation is correlated with real data deduced from a high-power SH generation (SHG) experimental device. It is found that when using the open-top oven scheme and fixing the fundamental M 2-factor at nearly 1, for a range of input powers changing from 15 to 30 W, the M 2-factor of SHG beam is degraded from 9% to 24%, respectively, confirming very good consistency with the reported experimental results.

Investigation on synthesis, growth and characterization of CdIn2S2Se2 single crystal grown by vertical Bridgman method

NASA Astrophysics Data System (ADS)

Vijayakumar, P.; Ramasamy, P.

2017-06-01

CdIn2S2Se2 polycrystalline material has been synthesized by melt oscillation method. Vertical Bridgman method was used to grow a good quality CdIn2S2Se2 single crystal. The crystalline phase and growth orientation were confirmed by powder X-ray diffraction pattern and unit cell parameters were determined by single crystal X-ray diffraction analysis. The structural uniformity of CdIn2S2Se2 was studied using Raman scattering spectroscopy at room temperature. The stoichiometric composition variation along the CdIn2S2Se2 was measured using energy dispersive spectrometry. The transmission spectra of CdIn2S2Se2 single crystal gave 42% transmission in the NIR region. Thermal property of CdIn2S2Se2 has been studied using differential thermal analysis. Thermal diffusivity, specific heat capacity and thermal conductivity were also measured. Electrical property was measured using Hall Effect measurement and it confirms the n-type semiconducting nature. The hardness behavior has been measured using Vickers micro hardness measurement and the indentation size effect has been observed.

[Evoked potentials extraction based on cross-talk resistant adaptive noise cancellation].

PubMed

Zeng, Qingning; Li, Ling; Liu, Qinghua; Yao, Dezhong

2004-06-01

As Evoked Potentials are much lower in amplitude with respect to the on-going EEC, many trigger-related signals are needed for common averaging technique to enable the extraction of single-trail evoked potentials (EP). How to acquire EP through fewer evocations is an important research project. This paper proposes a cross-talk resistant adaptive noise cancellation method to extract EP. Together with the use of filtering technique and the common averaging technique, the present method needs much less evocations to acquire EP signals. According to the simulating experiment, it needs only several evocations or even only one evocation to get EP signals in good quality.

Study of Nickel Silicide as a Copper Diffusion Barrier in Monocrystalline Silicon Solar Cells

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kale, Abhijit; Beese, Emily; Saenz, Theresa

NiSi as a conductive diffusion barrier to silicon has been studied. We demonstrate that the NiSi films formed using the single step annealing process are as good as the two step process using XRD and Raman. Quality of NiSi films formed using e-beam Ni and electroless Ni process has been compared. Incomplete surface coverage and presence of constituents other than Ni are the main challenges with electroless Ni. We also demonstrate that Cu reduces the thermal stability of NiSi films. The detection of Cu has proven to be difficult due to temperature limitations.

Environmental monitoring of Galway Bay: fusing data from remote and in-situ sources

NASA Astrophysics Data System (ADS)

O'Connor, Edel; Hayes, Jer; Smeaton, Alan F.; O'Connor, Noel E.; Diamond, Dermot

2009-09-01

Changes in sea surface temperature can be used as an indicator of water quality. In-situ sensors are being used for continuous autonomous monitoring. However these sensors have limited spatial resolution as they are in effect single point sensors. Satellite remote sensing can be used to provide better spatial coverage at good temporal scales. However in-situ sensors have a richer temporal scale for a particular point of interest. Work carried out in Galway Bay has combined data from multiple satellite sources and in-situ sensors and investigated the benefits and drawbacks of using multiple sensing modalities for monitoring a marine location.

Assessment of irrigation water quality. A proposal of a quality profile.

PubMed

Almeida, César; Quintar, Silvya; González, Patricia; Mallea, Miguel

2008-07-01

Water quality indices provide a simple and understandable tool for managers on the quality and possible uses for irrigation water, however an individual quality factor alone is not enough to evaluate the irrigation water quality because it could be restrictive and sometime it could give an unfavorable qualification. The aim of this paper was propose a quality profile of irrigation water using the preexisting water quality indices to be applied to arid and semi-arid regions. As a case studied, the water of the Del Molle River (Nogolí, San Luis, Argentina) was researched. Samples were collected during the period October 2005-May 2006. Conductivity, pH, total hardness, sulphate, nitrate, nitrite, alkalinity, chloride, sodium, potassium, TDS, DO and phosphate were analyzed. The irrigation water quality, according to Riverside Norm, belongs to C(2)-S(1) class, according to Wilcox Norm as excellent to good, according to Scott quality factor it is good and according to SAR < 10 and according to RCS it is recommendable. From the obtained data, it can be concluded that the water quality profile was good, so it is useful for normal irrigation agriculture.

Synthesis of Epitaxial Single-Layer MoS2 on Au(111).

PubMed

Grønborg, Signe S; Ulstrup, Søren; Bianchi, Marco; Dendzik, Maciej; Sanders, Charlotte E; Lauritsen, Jeppe V; Hofmann, Philip; Miwa, Jill A

2015-09-08

We present a method for synthesizing large area epitaxial single-layer MoS2 on the Au(111) surface in ultrahigh vacuum. Using scanning tunneling microscopy and low energy electron diffraction, the evolution of the growth is followed from nanoscale single-layer MoS2 islands to a continuous MoS2 layer. An exceptionally good control over the MoS2 coverage is maintained using an approach based on cycles of Mo evaporation and sulfurization to first nucleate the MoS2 nanoislands and then gradually increase their size. During this growth process the native herringbone reconstruction of Au(111) is lifted as shown by low energy electron diffraction measurements. Within the MoS2 islands, we identify domains rotated by 60° that lead to atomically sharp line defects at domain boundaries. As the MoS2 coverage approaches the limit of a complete single layer, the formation of bilayer MoS2 islands is initiated. Angle-resolved photoemission spectroscopy measurements of both single and bilayer MoS2 samples show a dramatic change in their band structure around the center of the Brillouin zone. Brief exposure to air after removing the MoS2 layer from vacuum is not found to affect its quality.

76 FR 2123 - Agency Information Collection Activities; Announcement of Office of Management and Budget...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-01-12

...; Current Good Manufacturing Practice Quality System Regulation AGENCY: Food and Drug Administration, HHS... information entitled ``Current Good Manufacturing Practice Quality System Regulation'' has been approved by...

Separate and Joint Associations of Shift Work and Sleep Quality with Lipids.

PubMed

Charles, Luenda E; Gu, Ja K; Tinney-Zara, Cathy A; Fekedulegn, Desta; Ma, Claudia C; Baughman, Penelope; Hartley, Tara A; Andrew, Michael E; Violanti, John M; Burchfiel, Cecil M

2016-06-01

Shift work and/or sleep quality may affect health. We investigated whether shift work and sleep quality, separately and jointly, were associated with abnormal levels of triglycerides, total cholesterol (TC), and low-and high-density lipoprotein cholesterol in 360 police officers (27.5% women). Triglycerides, TC, and high-density lipoprotein were analyzed on the Abbott Architect; low-density lipoprotein was calculated. Shift work was assessed using City of Buffalo payroll work history records. Sleep quality (good, ≤ 5; intermediate, 6-8; poor, ≥ 9) was assessed using the Pittsburgh Sleep Quality Index questionnaire. A shift work + sleep quality variable was created: day plus good sleep; day plus poor sleep; afternoon/night plus good; and poor sleep quality. Mean values of lipid biomarkers were compared across categories of the exposures using analysis of variance/analysis of covariance. Shift work was not significantly associated with lipids. However, as sleep quality worsened, mean levels of triglycerides and TC gradually increased but only among female officers (age- and race-adjusted p = 0.013 and 0.030, respectively). Age significantly modified the association between sleep quality and TC. Among officers ≥ 40 years old, those reporting poor sleep quality had a significantly higher mean level of TC (202.9 ± 3.7 mg/dL) compared with those reporting good sleep quality (190.6 ± 4.0 mg/dL) (gender- and race-adjusted p = 0.010). Female officers who worked the day shift and also reported good sleep quality had the lowest mean level of TC compared with women in the other three categories (p = 0.014). Sleep quality and its combined influence with shift work may play a role in the alteration of some lipid measures.

A Critical Analysis of the INQAAHE Guidelines of Good Practice for Higher Education Quality Assurance Agencies

ERIC Educational Resources Information Center

Blackmur, Douglas

2008-01-01

The International Network of Quality Assurance Agencies in Higher Education's Guidelines of Good Practice by higher education quality assurance agencies need substantial revision before they can be considered adequate by stakeholders in any national higher education system. Various revisions are proposed in this article. But the International…

The Importance and Use of Quality Literature in the Classroom.

ERIC Educational Resources Information Center

Carus, Marianne

The author argues that children learn best when they are exposed to literature of good quality, such as that chosen for her magazine, "Cricket." With literature as the focus, the good teacher can develop a fully correlated language arts program. Using quality material in a lively and entertaining manner, "Cricket" lays…

Good Job, Good Life? Working Conditions and Quality of Life in Europe

ERIC Educational Resources Information Center

Drobnic, Sonja; Beham, Barbara; Prag, Patrick

2010-01-01

Cross-national comparisons generally show large differences in life satisfaction of individuals within and between European countries. This paper addresses the question of whether and how job quality and working conditions contribute to the quality of life of employed populations in nine strategically selected EU countries: Finland, Sweden, the…

Comparison of obese adults with poor versus good sleep quality during a functional neuroimaging delay discounting task: A pilot study.

PubMed

Martin, Laura E; Pollack, Lauren; McCune, Ashley; Schulte, Erica; Savage, Cary R; Lundgren, Jennifer D

2015-10-30

This study aimed to determine if obese adults with poor versus good sleep quality demonstrate reduced self-regulatory capacity and different patterns of neural activation when making impulsive monetary choices. Six obese, good quality sleepers (M age=44.7 years, M BMI=38.1 kg/m(2)) were compared to 13 obese, poor quality sleepers (M age=42.6, M BMI=39.2 kg/m(2)) on sleep and eating behavior and brain activation in prefrontal and insular regions while engaging in a delay discounting task during functional magnetic resonance imaging (fMRI). Poor quality sleepers demonstrated significantly lower brain activation in the right inferior frontal gyrus, right middle frontal gyrus, and bilateral insula when making immediate and smaller (impulsive) monetary choices compared to the baseline condition. Behaviorally, poor compared to good quality sleepers reported higher scores in the night eating questionnaire. Obese adults with poor sleep quality demonstrate decreased brain activation in multiple regions that regulate cognitive control and interceptive awareness, possibly reducing self-regulatory capacity when making immediately gratifying decisions. Copyright © 2015 Elsevier Ireland Ltd. All rights reserved.

Time lapse imaging: is it time to incorporate this technology into routine clinical practice?

PubMed

Bhide, Priya; Maheshwari, Abha; Cutting, Rachel; Seenan, Susan; Patel, Anita; Khan, Khalid; Homburg, Roy

2017-06-01

Time-lapse imaging (TLI) systems for embryo incubation, assessment and selection are a novel technology available to in vitro fertilization (IVF) clinics. However, there is uncertainty about their clinical and cost-effectiveness and insufficient good quality evidence to warrant their routine use. Despite this, enthusiastic commercial marketing and slipping clinical equipoise have led to the widespread hasty introduction of this technology into practice, often at a considerable expense to the patient. We have reviewed the published literature and aim to summarize the strengths, weaknesses, opportunities and threats of these systems. These specialized incubators provide undisturbed embryo culture conditions and, by almost continuous monitoring of embryo development, generate morphokinetic parameters to aid embryo selection. They are thus hypothesized to improve outcomes following IVF. Although literature reports improved reproductive outcomes, these outcomes are largely surrogate and there is a paucity of studies reporting live births. The use of time lapse systems may reduce early pregnancy loss, increase elective single embryo transfers and limit multiple pregnancies through better embryo selection. However, the quality of the studies and hence the evidence so far, is low to moderate quality. We recommend further research producing robust high-quality evidence for and against the use of these systems.

Multi-level diffractive optics for single laser exposure fabrication of telecom-band diamond-like 3-dimensional photonic crystals.

PubMed

Chanda, Debashis; Abolghasemi, Ladan E; Haque, Moez; Ng, Mi Li; Herman, Peter R

2008-09-29

We present a novel multi-level diffractive optical element for diffractive optic near-field lithography based fabrication of large-area diamond-like photonic crystal structure in a single laser exposure step. A multi-level single-surface phase element was laser fabricated on a thin polymer film by two-photon polymerization. A quarter-period phase shift was designed into the phase elements to generate a 3D periodic intensity distribution of double basis diamond-like structure. Finite difference time domain calculation of near-field diffraction patterns and associated isointensity surfaces are corroborated by definitive demonstration of a diamond-like woodpile structure formed inside thick photoresist. A large number of layers provided a strong stopband in the telecom band that matched predictions of numerical band calculation. SEM and spectral observations indicate good structural uniformity over large exposure area that promises 3D photonic crystal devices with high optical quality for a wide range of motif shapes and symmetries. Optical sensing is demonstrated by spectral shifts of the Gamma-Zeta stopband under liquid emersion.

A Flexible Annular-Array Imaging Platform for Micro-Ultrasound

PubMed Central

Qiu, Weibao; Yu, Yanyan; Chabok, Hamid Reza; Liu, Cheng; Tsang, Fu Keung; Zhou, Qifa; Shung, K. Kirk; Zheng, Hairong; Sun, Lei

2013-01-01

Micro-ultrasound is an invaluable imaging tool for many clinical and preclinical applications requiring high resolution (approximately several tens of micrometers). Imaging systems for micro-ultrasound, including single-element imaging systems and linear-array imaging systems, have been developed extensively in recent years. Single-element systems are cheaper, but linear-array systems give much better image quality at a higher expense. Annular-array-based systems provide a third alternative, striking a balance between image quality and expense. This paper presents the development of a novel programmable and real-time annular-array imaging platform for micro-ultrasound. It supports multi-channel dynamic beamforming techniques for large-depth-of-field imaging. The major image processing algorithms were achieved by a novel field-programmable gate array technology for high speed and flexibility. Real-time imaging was achieved by fast processing algorithms and high-speed data transfer interface. The platform utilizes a printed circuit board scheme incorporating state-of-the-art electronics for compactness and cost effectiveness. Extensive tests including hardware, algorithms, wire phantom, and tissue mimicking phantom measurements were conducted to demonstrate good performance of the platform. The calculated contrast-to-noise ratio (CNR) of the tissue phantom measurements were higher than 1.2 in the range of 3.8 to 8.7 mm imaging depth. The platform supported more than 25 images per second for real-time image acquisition. The depth-of-field had about 2.5-fold improvement compared to single-element transducer imaging. PMID:23287923

Modeling water demand when households have multiple sources of water

NASA Astrophysics Data System (ADS)

Coulibaly, Lassina; Jakus, Paul M.; Keith, John E.

2014-07-01

A significant portion of the world's population lives in areas where public water delivery systems are unreliable and/or deliver poor quality water. In response, people have developed important alternatives to publicly supplied water. To date, most water demand research has been based on single-equation models for a single source of water, with very few studies that have examined water demand from two sources of water (where all nonpublic system water sources have been aggregated into a single demand). This modeling approach leads to two outcomes. First, the demand models do not capture the full range of alternatives, so the true economic relationship among the alternatives is obscured. Second, and more seriously, economic theory predicts that demand for a good becomes more price-elastic as the number of close substitutes increases. If researchers artificially limit the number of alternatives studied to something less than the true number, the price elasticity estimate may be biased downward. This paper examines water demand in a region with near universal access to piped water, but where system reliability and quality is such that many alternative sources of water exist. In extending the demand analysis to four sources of water, we are able to (i) demonstrate why households choose the water sources they do, (ii) provide a richer description of the demand relationships among sources, and (iii) calculate own-price elasticity estimates that are more elastic than those generally found in the literature.

How Many Pixels Does It Take to Make a Good 4"×6" Print? Pixel Count Wars Revisited

NASA Astrophysics Data System (ADS)

Kriss, Michael A.

Digital still cameras emerged following the introduction of the Sony Mavica analog prototype camera in 1981. These early cameras produced poor image quality and did not challenge film cameras for overall quality. By 1995 digital still cameras in expensive SLR formats had 6 mega-pixels and produced high quality images (with significant image processing). In 2005 significant improvement in image quality was apparent and lower prices for digital still cameras (DSCs) started a rapid decline in film usage and film camera sells. By 2010 film usage was mostly limited to professionals and the motion picture industry. The rise of DSCs was marked by a “pixel war” where the driving feature of the cameras was the pixel count where even moderate cost, ˜120, DSCs would have 14 mega-pixels. The improvement of CMOS technology pushed this trend of lower prices and higher pixel counts. Only the single lens reflex cameras had large sensors and large pixels. The drive for smaller pixels hurt the quality aspects of the final image (sharpness, noise, speed, and exposure latitude). Only today are camera manufactures starting to reverse their course and producing DSCs with larger sensors and pixels. This paper will explore why larger pixels and sensors are key to the future of DSCs.

Parental Relationships in Fragile Families

PubMed Central

McLanahan, Sara; Beck, Audrey N.

2011-01-01

Summary As nonmarital childbearing escalated in the United States over the past half century, fragile families—defined as unmarried couples with children—drew increased interest from researchers and policy makers. Sara McLanahan and Audrey Beck discuss four aspects of parental relationships in these families: the quality of parents’ intimate relationship, the stability of that relationship, the quality of the co-parenting relationship among parents who live apart, and nonresident fathers’ involvement with their child. At the time of their child’s birth, half of the parents in fragile families are living together and another third are living apart but romantically involved. Despite high hopes at birth, five years later only a third of parents are still together, and new partners and new children are common, leading to high levels of instability and complexity in these families. Drawing on findings from the Fragile Families and Child Wellbeing Study, McLanahan and Beck highlight a number of predictors of low relationship quality and stability in these families, including low economic resources, government policies that discourage marriage, gender distrust and acceptance of single motherhood, sex ratios that favor men, children from previous unions, and psychological factors that make it difficult for parents to maintain healthy relationships. No single factor appears to have a dominant effect. The authors next discuss two types of experiments that attempt to establish causal effects on parental relationships: those aimed at altering economic resources and those aimed at improving relationships. What can be done to strengthen parental relationships in fragile families? The authors note that although economic resources are a consistent predictor of stable relationships, researchers and policy makers lack good causal information on whether increasing fathers’ employment and earnings will increase relationship quality and union stability. They also note that analysts need to know more about whether relationship quality in fragile families can be improved directly and whether doing so will increase union stability, father involvement, and co-parenting quality. PMID:20964130

Parental relationships in fragile families.

PubMed

McLanahan, Sara; Beck, Audrey N

2010-01-01

As nonmarital childbearing escalated in the United States over the past half century, fragile families--defined as unmarried couples with children--drew increased interest from researchers and policy makers. Sara McLanahan and Audrey Beck discuss four aspects of parental relationships in these families: the quality of parents' intimate relationship, the stability of that relationship, the quality of the co-parenting relationship among parents who live apart, and nonresident fathers' involvement with their child. At the time of their child's birth, half of the parents in fragile families are living together and another third are living apart but romantically involved. Despite high hopes at birth, five years later only a third of parents are still together, and new partners and new children are common, leading to high levels of instability and complexity in these families. Drawing on findings from the Fragile Families and Child Wellbeing Study, McLanahan and Beck highlight a number of predictors of low relationship quality and stability in these families, including low economic resources, government policies that discourage marriage, gender distrust and acceptance of single motherhood, sex ratios that favor men, children from previous unions, and psychological factors that make it difficult for parents to maintain healthy relationships. No single factor appears to have a dominant effect. The authors next discuss two types of experiments that attempt to establish causal effects on parental relationships: those aimed at altering economic resources and those aimed at improving relationships. What can be done to strengthen parental relationships in fragile families? The authors note that although economic resources are a consistent predictor of stable relationships, researchers and policy makers lack good causal information on whether increasing fathers' employment and earnings will increase relationship quality and union stability. They also note that analysts need to know more about whether relationship quality in fragile families can be improved directly and whether doing so will increase union stability, father involvement, and co-parenting quality.

Brand Name, Store Image, and Country-of-Origin: The Effects on Consumers' Perception of Quality and Price.

ERIC Educational Resources Information Center

King, Margaret C. A.

1993-01-01

A review of literature indicated that, with regard to brand labels, consumers' perception of price, but not of quality, was affected. Consumers expected to pay more for goods bought in a higher status store and rated imported goods as being more expensive than domestically produced goods. Products from developing countries received lower quality…

Redesign and initial validation of an instrument to assess the motivational qualities of music in exercise: the Brunel Music Rating Inventory-2.

PubMed

Karageorghis, Costas I; Priest, David-Lee; Terry, Peter C; Chatzisarantis, Nikos L D; Lane, Andrew M

2006-08-01

In the present study, a measure to assess the motivational qualities of music in exercise was redesigned, extending previous research efforts (Karageorghis et al., 1999). The original measure, the Brunel Music Rating Inventory (BMRI), had shown limitations in its factor structure and its applicability to non-experts in music selection. Redesign of the BMRI used in-depth interviews with eight participants (mean age 31.9 years, s = 8.9 years) to establish the initial item pool, which was examined using a series of confirmatory factor analyses. A single-factor model provided a good fit across three musical selections with different motivational qualities (comparative fit index, CFI: 0.95-0.98; standardized root mean residual, SRMR: 0.03-0.05). The single-factor model also demonstrated acceptable fit across two independent samples and both sexes using one piece of music (CFI: 0.86-1.00; SRMR: 0.04-0.07). The BMRI was designed for experts in selecting music for exercise (e.g. dance aerobic instructors), whereas the BMRI-2 can be used both by exercise instructors and participants. The psychometric properties of the BMRI-2 are stronger than those of the BMRI and it is easier to use. The BMRI-2 provides a valid and internally consistent tool by which music can be selected to accompany a bout of exercise or a training session. Furthermore, the BMRI-2 enables researchers to standardize music in experimental protocols involving exercise-related tasks.

Antimüllerian hormone as a predictor of good-quality supernumerary blastocyst cryopreservation among women with levels <1 ng/mL versus 1-4 ng/mL.

PubMed

Kavoussi, Shahryar K; Odenwald, Kate C; Boehnlein, Lynn M; Summers-Colquitt, Roxanne B; Pool, Thomas B; Swain, Jason E; Jones, Jeffrey M; Lindstrom, Mary J; Lebovic, Dan I

2015-09-01

To determine whether antimüllerian hormone (AMH) levels predict the availability of good-quality supernumerary blastocysts for cryopreservation. Retrospective study. Two fertility centers. First fresh IVF cycles (n = 247) grouped as follows: 40 women <35 year old with AMH <1 ng/mL and 77 women with AMH 1-4 ng/mL; 62 women ≥35 year old with AMH <1 ng/mL, and 68 women with AMH 1-4 ng/mL. AMH level measured before IVF with ovarian stimulation protocols based on patient age and AMH level, including short gonadotropin-releasing hormone (GnRH) agonist, GnRH antagonist, or GnRH agonist microdose flare; supernumerary good-quality blastocysts cryopreserved on days 5 or 6 after retrieval. Supernumerary good-quality blastocysts for cryopreservation in relation to AMH levels. Among women <35 years of age, there was a statistically significant difference in the number of patients with supernumerary good-quality blastocysts for cryopreservation between the groups with AMH <1 ng/mL and AMH 1-4 ng/mL (30.0% vs. 58.4%) when adjusted for age. Among women ≥35 years of age, there was a statistically significant difference in the number of patients with supernumerary good-quality blastocyst cryopreservation between groups with AMH <1 ng/mL and AMH 1-4 ng/mL (16.1% vs. 42.6%), when adjusted for age. Low AMH levels are associated with a statistically significantly lower likelihood of blastocysts for cryopreservation as compared with higher AMH levels. This effect was seen among women both <35 and ≥35 years of age. Patient counseling should include realistic expectations for the probability of good-quality supernumerary blastocysts available for cryopreservation. Copyright © 2015 The Authors. Published by Elsevier Inc. All rights reserved.

Finding Quality in "Being Good Enough" Conversations

ERIC Educational Resources Information Center

Gibbs, Paul

2011-01-01

This article considers how a contribution based on Rorty's philosophy can help in the understanding of quality and its assurance in higher education. The suggestion is that if quality has an edifying purpose, then it should be seen as an ongoing process and might be aptly judged as being just "good enough". This position is argued for it…

How Good Is Our College? First Edition

ERIC Educational Resources Information Center

Education Scotland, 2016

2016-01-01

The new quality framework, "How good is our college?" is a tool to support and enable colleges to evaluate the quality of provision and services alongside reporting on progress in relation to outcome agreements. It is designed to be used by all college staff. Colleges will evaluate the quality of their provision and services using the 12…

Post-harvest loss of farm raised Indian and Chinese major carps in the distribution channel from Mymensingh to Rangpur of Bangladesh.

PubMed

Hossain, M Motaleb; Rahman, Mahabubur; Hassan, M Nazmul; Nowsad, A A K M

2013-06-15

Post-harvest loss of catla (Catla catla), rohu (Labeo rohita), mrigal (Cirrhinus mrigala), silver carp (Hypophthalmichthys molitrix), grass carp (Ctenopharyngodon idella) and sarpunti (Puntius sarana) in a single distribution chain from harvest in Mymensingh to retail sale Rangpur town were determined, in order to obtain information on quality deterioration and existing handling and icing conditions so that suggestions for improving such practices can be made. Quality defect points of the fish at different steps of distribution channels were determined using a sensory based quality assessment tool. Percent quality loss of fish at each step of distribution was calculated from the number of cases that crossed sensory quality cut-off points. Neither of the fish lost their quality when they were in the farm gate, during transportation and in wholesale markets in Rangpur but most of the fishes lost their quality at the retail fish shops. The quality loss was 8, 12, 8, 6, 10 and 14% in case of C. catla, C. mrigala, L. rohita, H. molitrix, C. idella and P. sarana respectively in the retail markets. Fishes were not properly handled, bamboo baskets wrapped with polythene sheet were used as carrying container and inadequate ice was used during transportation. Retailers were found to be more proactive in the use of ice. However, most of the fishes were deteriorated during retail sale. The losses of farmed fishes could be minimized by adopting good handling practices like using insulated container and adequate icing.

Image Improvement Techniques

NASA Astrophysics Data System (ADS)

Shine, R. A.

1997-05-01

Over the last decade, a repertoire of techniques have been developed and/or refined to improve the quality of high spatial resolution solar movies taken from ground based observatories. These include real time image motion corrections, frame selection, phase diversity measurements of the wavefront, and extensive post processing to partially remove atmospheric distortion. Their practical application has been made possible by the increasing availability and decreasing cost of large CCD's with fast digital readouts and high speed computer workstations with large memories. Most successful have been broad band (0.3 to 10 nm) filtergram movies which can use exposure times of 10 to 30 ms, short enough to ``freeze'' atmospheric motions. Even so, only a handful of movies with excellent image quality for more than a hour have been obtained to date. Narrowband filtergrams (about 0.01 nm), such as those required for constructing magnetograms and Dopplergrams, have been more challenging although some single images approach the quality of the best continuum images. Some promising new techniques and instruments, together with persistence and good luck, should continue the progress made in the last several years.

Scatter characterization and correction for simultaneous multiple small-animal PET imaging.

PubMed

Prasad, Rameshwar; Zaidi, Habib

2014-04-01

The rapid growth and usage of small-animal positron emission tomography (PET) in molecular imaging research has led to increased demand on PET scanner's time. One potential solution to increase throughput is to scan multiple rodents simultaneously. However, this is achieved at the expense of deterioration of image quality and loss of quantitative accuracy owing to enhanced effects of photon attenuation and Compton scattering. The purpose of this work is, first, to characterize the magnitude and spatial distribution of the scatter component in small-animal PET imaging when scanning single and multiple rodents simultaneously and, second, to assess the relevance and evaluate the performance of scatter correction under similar conditions. The LabPET™-8 scanner was modelled as realistically as possible using Geant4 Application for Tomographic Emission Monte Carlo simulation platform. Monte Carlo simulations allow the separation of unscattered and scattered coincidences and as such enable detailed assessment of the scatter component and its origin. Simple shape-based and more realistic voxel-based phantoms were used to simulate single and multiple PET imaging studies. The modelled scatter component using the single-scatter simulation technique was compared to Monte Carlo simulation results. PET images were also corrected for attenuation and the combined effect of attenuation and scatter on single and multiple small-animal PET imaging evaluated in terms of image quality and quantitative accuracy. A good agreement was observed between calculated and Monte Carlo simulated scatter profiles for single- and multiple-subject imaging. In the LabPET™-8 scanner, the detector covering material (kovar) contributed the maximum amount of scatter events while the scatter contribution due to lead shielding is negligible. The out-of field-of-view (FOV) scatter fraction (SF) is 1.70, 0.76, and 0.11% for lower energy thresholds of 250, 350, and 400 keV, respectively. The increase in SF ranged between 25 and 64% when imaging multiple subjects (three to five) of different size simultaneously in comparison to imaging a single subject. The spill-over ratio (SOR) increases with increasing the number of subjects in the FOV. Scatter correction improved the SOR for both water and air cold compartments of single and multiple imaging studies. The recovery coefficients for different body parts of the mouse whole-body and rat whole-body anatomical models were improved for multiple imaging studies following scatter correction. The magnitude and spatial distribution of the scatter component in small-animal PET imaging of single and multiple subjects simultaneously were characterized, and its impact was evaluated in different situations. Scatter correction improves PET image quality and quantitative accuracy for single rat and simultaneous multiple mice and rat imaging studies, whereas its impact is insignificant in single mouse imaging.

Synthesis and single crystal growth of perovskite semiconductor CsPbBr3

NASA Astrophysics Data System (ADS)

Zhang, Mingzhi; Zheng, Zhiping; Fu, Qiuyun; Chen, Zheng; He, Jianle; Zhang, Sen; Chen, Cheng; Luo, Wei

2018-02-01

As a typical representative of all-inorganic lead halide perovskites, cesium lead bromine (CsPbBr3) has attracted significant attention in recent years. The direct band gap semiconductor CsPbBr3 has a wide band gap of 2.25 eV and high average atomic number (Cs: 55, Pb: 82 and Br: 35), which meet most of the requirements for detection of X- and γ-ray radiation, such as high attenuation, high resistivity, and significant photoconductivity response. However, the growth of large volume CsPbBr3 single crystals remains a challenge. In this paper, the synthesis of CsPbBr3 polycrystalline powders by a chemical co-precipitation method was investigated and the optimum synthesis conditions were obtained. A large CsPbBr3 single crystal of 8 mm diameter and 60 mm length was obtained by a creative electronic dynamic gradient (EDG) method. X-ray diffraction (XRD) patterns and X-ray rocking curve showed that the CsPbBr3 crystal preferentially oriented in the (1 1 0) direction and had a low dislocation density and small residual stress in the crystal. The IR and UV-Vis transmittance and temperature-dependent photoluminescence (PL) spectra showed the crystal had a good basic optical performance. The almost linear current-voltage (I-V) curves implied good ohmic contact between the electrodes and crystal surfaces. The resistivity of the crystal was calculated 109-1010 Ω cm. The above results showed that the quality of the obtained crystal had met the demand of optoelectronic applications.

Maintaining data integrity in a rural clinical trial.

PubMed

Van den Broeck, Jan; Mackay, Melanie; Mpontshane, Nontobeko; Kany Kany Luabeya, Angelique; Chhagan, Meera; Bennish, Michael L

2007-01-01

Clinical trials conducted in rural resource-poor settings face special challenges in ensuring quality of data collection and handling. The variable nature of these challenges, ways to overcome them, and the resulting data quality are rarely reported in the literature. To provide a detailed example of establishing local data handling capacity for a clinical trial conducted in a rural area, highlight challenges and solutions in establishing such capacity, and to report the data quality obtained by the trial. We provide a descriptive case study of a data system for biological samples and questionnaire data, and the problems encountered during its implementation. To determine the quality of data we analyzed test-retest studies using Kappa statistics of inter- and intra-observer agreement on categorical data. We calculated Technical Errors of Measurement of anthropometric measurements, audit trail analysis was done to assess error correction rates, and residual error rates were calculated by database-to-source document comparison. Initial difficulties included the unavailability of experienced research nurses, programmers and data managers in this rural area and the difficulty of designing new software tools and a complex database while making them error-free. National and international collaboration and external monitoring helped ensure good data handling and implementation of good clinical practice. Data collection, fieldwork supervision and query handling depended on streamlined transport over large distances. The involvement of a community advisory board was helpful in addressing cultural issues and establishing community acceptability of data collection methods. Data accessibility for safety monitoring required special attention. Kappa values and Technical Errors of Measurement showed acceptable values. Residual error rates in key variables were low. The article describes the experience of a single-site trial and does not address challenges particular to multi-site trials. Obtaining and maintaining data integrity in rural clinical trials is feasible, can result in acceptable data quality and can be used to develop capacity in developing country sites. It does, however, involve special challenges and requirements.

The reported quality of life of selected home hemodialysis patients.

PubMed

Molzahn, A E

1991-04-01

The quality of life (QoL) of 10 home hemodialysis (HHD) patients was studied using the Aristotelian-Thomistic philosophical theory of the good life. According to this theory, seven types of real goods are required to have a good life. Semistructured interviews were used to determine whether the patients possessed these goods. Also, card sort tasks were used to obtain the patients' ranking of these goods in terms of the importance of the goods and time spent acquiring them. It was found that the subjects were seriously deprived of some of the real goods required to have a good life, including health, vigor, pleasurable feelings, freedom of action, and free time. Goods of personal association and goods of the body were of greatest importance to the subjects. It appears that this theory has some utility in assessing QoL of patients on HHD.

Quality of Life Among Dental Students: A Survey Study.

PubMed

Andre, Amanda; Pierre, Gaelle C; McAndrew, Maureen

2017-10-01

Quality of life is a complex construct that affects the overall life satisfaction, emotional well-being, and functioning of individuals. The aim of our study was to assess the quality of life of dental students at one U.S. dental school, using the World Health Organization Quality of Life (WHOQOL)-BREF, a multi-dimensional, cross-cultural, validated, and reliable survey instrument. Of the 1,437 students invited to participate, 401 students responded, but 17 were excluded because of missing data. The final sample consisted of 384 students for an overall response rate of 27%: response rates by year were first year 32.6%, second year 16.9%, third year 26.6%, and fourth year 24.0%. The results showed that the responding students rated their overall quality of life as good. The Physical Health domain had the highest mean score, while the Psychological domain had the lowest. Females reported higher quality of life than males in the Social Relationships domain. Single students were found to have a lower perceived quality of life than married students. Older students were found to have lower perceived quality of life in the Physical Health and Environment domains. Physical Health domain scores were significantly higher for fourth-year than first-year respondents, while Psychological domain scores were significantly lower for third-year than first-year respondents. Further research is needed to explore the effect of dental school on the quality of life of dental students. Targeted programs to impact students' quality of life at various points in the curriculum may be beneficial.

A "good practice" approach to the quality and consistency of morphological examination of the internal head structures of the term rabbit fetus.

PubMed

French, Julian M

2014-07-01

Variation in the interpretation of the regulatory guidelines has resulted in a diversity of techniques employed to examine the internal structures of the foetal rabbit head. Examination of the foetal rabbit brain, using a single transverse section as the sole technique, is considered not to be sufficiently thorough to be regarded as an adequate examination method. It is not compliant with published EPA and OECD guidelines covering required examination of the internal head structures, nor is it considered to conform to the spirit of the safety assessment required by the ICH guideline. Fixation of approximately half of the heads in each litter to allow the examination of multiple transverse sections enables the major structures within the head to be assessed effectively. This method is compliant with current guidelines, represents "good practice" and should be consistently adopted for the examination of the internal head structures of the term rabbit foetus. Copyright © 2014 Elsevier Inc. All rights reserved.

Low-temperature magnetic properties of GdCoIn5

NASA Astrophysics Data System (ADS)

Betancourth, D.; Facio, J. I.; Pedrazzini, P.; Jesus, C. B. R.; Pagliuso, P. G.; Vildosola, V.; Cornaglia, Pablo S.; García, D. J.; Correa, V. F.

2015-01-01

A comprehensive experimental and theoretical study of the low temperature properties of GdCoIn5 was performed. Specific heat, thermal expansion, magnetization and electrical resistivity were measured in good quality single crystals down to 4He temperatures. All the experiments show a second-order-like phase transition at 30 K probably associated with the onset of antiferromagnetic order. The magnetic susceptibility shows a pronounced anisotropy below TN with an easy magnetic axis perpendicular to the crystallographic ĉ-axis. Total energy GGA+U calculations indicate a ground state with magnetic moments localized at the Gd ions and allowed a determination of the Gd-Gd magnetic interactions. Band structure calculations of the electron and phonon contributions to the specific heat together with Quantum Monte Carlo calculations of the magnetic contributions show a very good agreement with the experimental data. Comparison between experiment and calculations suggests a significant anharmonic contribution to the specific heat at high temperature (T ≳ 100 K).

Growth and characterization of barium complex of 1,3,5-triazinane-2,4,6-trione in gel: a corrosion inhibiting material

NASA Astrophysics Data System (ADS)

Divya, R.; Nair, Lekshmi P.; Bijini, B. R.; Nair, C. M. K.; Babu, K. Rajendra

2018-05-01

Good quality prismatic crystals of industrially applicable corrosion inhibiting barium complex of 1,3,5-triazinane-2,4,6-trione have been grown by conventional gel method. The crystal structure, packing, and nature of bonds are revealed in the single crystal X-ray diffraction analysis. The crystal has a three-dimensional polymeric structure having a triclinic crystal system with the space group P-1. The powder X-ray diffraction analysis confirms its crystalline nature. The functional groups present in the crystal are identified by Fourier transform infrared spectroscopy. Elemental analysis confirms the stoichiometry of the elements present in the complex. Thermogravimetric analysis and differential thermal analysis reveal its good thermal stability. The optical properties like band gap, refractive index and extinction coefficient are evaluated from the UV-visible spectral analysis. The singular property of the material, corrosion inhibition efficiency achieved by the adsorption of the sample molecules is determined by the weight loss method.

What information can frictional properties of polymer brushes tell us?

NASA Astrophysics Data System (ADS)

Zhang, Zhenyu; Moxey, Mark; Morse, Andrew; Armes, Steven; Lewis, Andrew; Geoghegan, Mark; Leggett, Graham

2013-03-01

We have used friction force microscopy (FFM) to quantitatively examine surface grown zwitterionic polymer brushes: poly(2-(methacryloyloxy)ethyl phosphorylcholine) (PMPC), and to establish the correlation between its frictional behaviour to other intrinsic properties. In a good solvent, it was found that the coefficient of friction (μ) decreased with increasing film thickness. We conclude that the amount of bound solvent increases as the brush length increases, causing the osmotic pressure to increase and yielding a reduced tendency for the brush layer to deform under applied load. When measured in a series of alcohol/water mixtures, a significant increase in μ was observed for ethanol/water mixtures at a volume fraction of 90%. This is attributed to brush collapse due to co-nonsolvency, leading to loss of hydration of the brush chains and hence substantially reduced lubrication. We show that single asperity contact mechanics is strongly dependent on solvent quality. Friction-load relationship was found linear in methanol (good solvent), but sub-linear in water and ethanol (moderate solvent).

Ovum pick-up in sheep: a comparison between different aspiration devices for optimal oocyte retrieval.

PubMed

Rodríguez, C; Anel, L; Alvarez, M; Anel, E; Boixo, J C; Chamorro, C A; de Paz, P

2006-04-01

In vivo ovum pick-up (OPU) in sheep may be improved with a proper choice of aspiration elements (needle and tubing) and aspiration vacuum pressure. In the present study, two experiments were carried out. In Expt 1, visible follicles in ovaries of slaughtered ewes (treated separately according to their diameters: small<3 mm, medium 3-5 mm and large>5 mm) were aspirated using different combinations of the three studied factors such as aspiration flow rate (10, 20, 30, 40 and 50 ml water/min), needle gauge (18 and 20 G) and tubing inner diameter (1, 2 or 3 mm internal diameter). In Expt 2, a study with two 18 G needles of different lengths (18 G: 82 mm; 18 GL: 600 mm) was carried out, using ovaries obtained post-mortem, and performing in vivo laparoscopic follicular aspiration on ewes. We considered good quality oocytes as those with both complete compact cumulus and a homogeneous cytoplasm. Recovery rate, proportion of good quality oocytes (good quality oocytes/100 oocytes recovered) and overall efficiency (good quality oocytes/100 follicles aspirated) were noted. In Expt 1, aspiration flow rate affect remarkable proportion of good quality oocytes (69.5%, 50.5%, 44.8%, 36.5% and 28.3% for flows from 10 to 50 ml/min respectively, p<0.05). Needle gauge did not affect aspiration device efficiency. Thin and intermediate tubings were more effective (overall efficiency rates: 34.9%, 32.3% and 28.1% for 1, 2 and 3 mm respectively, p<0.05). Follicle size did not affect recovery rate, but proportion of good quality oocytes was higher for large (77.9%) and medium (64.4%) follicles (p<0.05). Finally, some combinations of the aspiration device showed greater effectiveness. In Expt 2, needle length did not influence recovery rate, but good quality oocytes rate was significantly modified both post-mortem and in vivo (good quality rate for 18 G vs 18 GL needles: 69.5% vs 47.7% and 58.1% vs 25.4%, post-mortem and in vivo respectively, p<0.05). We conclude that low-aspiration flow rates (10 and 20 ml/min) with thin or intermediate tubings (1 and 2 mm), and any short needle (18 G or 20 G) are the most adequate aspiration factors for OPU in sheep.

Simple single-emitting layer hybrid white organic light emitting with high color stability

NASA Astrophysics Data System (ADS)

Nguyen, C.; Lu, Z. H.

2017-10-01

Simultaneously achieving a high efficiency and color quality at luminance levels required for solid-state lighting has been difficult for white organic light emitting diodes (OLEDs). Single-emitting layer (SEL) white OLEDs, in particular, exhibit a significant tradeoff between efficiency and color stability. Furthermore, despite the simplicity of SEL white OLEDs being its main advantage, the reported device structures are often complicated by the use of multiple blocking layers. In this paper, we report a highly simplified three-layered white OLED that achieves a low turn-on voltage of 2.7 V, an external quantum efficiency of 18.9% and power efficiency of 30 lm/W at 1000 cd/cm2. This simple white OLED also shows good color quality with a color rendering index of 75, CIE coordinates (0.42, 0.46), and little color shifting at high luminance. The device consists of a SEL sandwiched between a hole transport layer and an electron transport layer. The SEL comprises a thermally activated delayer fluorescent molecule having dual functions as a blue emitter and as a host for other lower energy emitters. The improved color stability and efficiency in such a simple device structure is explained as due to the elimination of significant energy barriers at various organic-organic interfaces in the traditional devices having multiple blocking layers.

Colored Traveling Salesman Problem.

PubMed

Li, Jun; Zhou, MengChu; Sun, Qirui; Dai, Xianzhong; Yu, Xiaolong

2015-11-01

The multiple traveling salesman problem (MTSP) is an important combinatorial optimization problem. It has been widely and successfully applied to the practical cases in which multiple traveling individuals (salesmen) share the common workspace (city set). However, it cannot represent some application problems where multiple traveling individuals not only have their own exclusive tasks but also share a group of tasks with each other. This work proposes a new MTSP called colored traveling salesman problem (CTSP) for handling such cases. Two types of city groups are defined, i.e., each group of exclusive cities of a single color for a salesman to visit and a group of shared cities of multiple colors allowing all salesmen to visit. Evidences show that CTSP is NP-hard and a multidepot MTSP and multiple single traveling salesman problems are its special cases. We present a genetic algorithm (GA) with dual-chromosome coding for CTSP and analyze the corresponding solution space. Then, GA is improved by incorporating greedy, hill-climbing (HC), and simulated annealing (SA) operations to achieve better performance. By experiments, the limitation of the exact solution method is revealed and the performance of the presented GAs is compared. The results suggest that SAGA can achieve the best quality of solutions and HCGA should be the choice making good tradeoff between the solution quality and computing time.

Hospital quality: a product of good management as much as good treatment.

PubMed

Hyde, Andy; Frafjord, Anders

2013-01-01

In Norway, as in most countries, the demands placed on hospitals to reduce costs and improve the quality of services are intense. Although many say that improving quality reduces costs, few can prove it. Futhermore, how many people can show that improving quality improves patient satisfaction. Diakonhjemmet hospital in Norway has designed and implemented a hospital management system based on lean principles and the PDCA (Plan-Do-Check-Act) quality circle introduced by WE Deming (Deming 2000). The results are quite impressive with improvements in quality and patient satisfaction. The hospital also runs at a profit.

Correlates of a good death and the impact of hospice involvement: findings from the national survey of households affected by cancer.

PubMed

Cagle, John G; Pek, Jolynn; Clifford, Maggie; Guralnik, Jack; Zimmerman, Sheryl

2015-03-01

Knowing how to improve the dying experience for patients with end-stage cancer is essential for cancer professionals. However, there is little evidence on the relationship between clinically relevant factors and quality of death. Also, while hospice has been linked with improved outcomes, our understanding of factors that contribute to a "good death" when hospice is involved remains limited. This study (1) identified correlates of a good death and (2) provided evidence on the impact of hospice on quality of death. Using data from a survey of US households affected by cancer (N = 930, response rate 51 %), we fit regression models with a subsample of 158 respondents who had experienced the death of a family member with cancer. Measures included quality of death (good/bad) and clinically relevant factors including: hospice involvement, symptoms during treatment, whether wishes were followed, provider knowledge/expertise, and compassion. Respondents were 60 % female, 89 % White, and averaged 57 years old. Decedents were most often a respondent's spouse (46 %). While 73 % of respondents reported a good death, Hispanics were less likely to experience good death (p = 0.007). Clinically relevant factors, including hospice, were associated with good death (p < 0.05)--an exception being whether the physician said the cancer was curable/fatal. With adjustments, perceptions of provider knowledge/expertise was the only clinical factor that remained associated with good death. Enhanced provider training/communication, referrals to hospice and greater attention to symptom management may facilitate improved quality of dying. Additionally, the cultural relevance of the concept of a "good death" warrants further research.

Simple yet effective: Historical proximity variables improve the species distribution models for invasive giant hogweed (Heracleum mantegazzianum s.l.) in Poland

PubMed Central

Jarzyna, Ingeborga; Obidziński, Artur; Tokarska-Guzik, Barbara; Sotek, Zofia; Pabjanek, Piotr; Pytlarczyk, Adam; Sachajdakiewicz, Izabela

2017-01-01

Species distribution models are scarcely applicable to invasive species because of their breaking of the models’ assumptions. So far, few mechanistic, semi-mechanistic or statistical solutions like dispersal constraints or propagule limitation have been applied. We evaluated a novel quasi-semi-mechanistic approach for regional scale models, using historical proximity variables (HPV) representing a state of the population in a given moment in the past. Our aim was to test the effects of addition of HPV sets of different minimal recentness, information capacity and the total number of variables on the quality of the species distribution model for Heracleum mantegazzianum on 116000 km2 in Poland. As environmental predictors, we used fragments of 103 1×1 km, world- wide, free-access rasters from WorldGrids.org. Single and ensemble models were computed using BIOMOD2 package 3.1.47 working in R environment 3.1.0. The addition of HPV improved the quality of single and ensemble models from poor to good and excellent. The quality was the highest for the variants with HPVs based on the distance from the most recent past occurrences. It was mostly affected by the algorithm type, but all HPV traits (minimal recentness, information capacity, model type or the number of the time periods) were significantly important determinants. The addition of HPVs improved the quality of current projections, raising the occurrence probability in regions where the species had occurred before. We conclude that HPV addition enables semi-realistic estimation of the rate of spread and can be applied to the short-term forecasting of invasive or declining species, which also break equal-dispersal probability assumptions. PMID:28926580

Simple yet effective: Historical proximity variables improve the species distribution models for invasive giant hogweed (Heracleum mantegazzianum s.l.) in Poland.

PubMed

Mędrzycki, Piotr; Jarzyna, Ingeborga; Obidziński, Artur; Tokarska-Guzik, Barbara; Sotek, Zofia; Pabjanek, Piotr; Pytlarczyk, Adam; Sachajdakiewicz, Izabela

2017-01-01

Species distribution models are scarcely applicable to invasive species because of their breaking of the models' assumptions. So far, few mechanistic, semi-mechanistic or statistical solutions like dispersal constraints or propagule limitation have been applied. We evaluated a novel quasi-semi-mechanistic approach for regional scale models, using historical proximity variables (HPV) representing a state of the population in a given moment in the past. Our aim was to test the effects of addition of HPV sets of different minimal recentness, information capacity and the total number of variables on the quality of the species distribution model for Heracleum mantegazzianum on 116000 km2 in Poland. As environmental predictors, we used fragments of 103 1×1 km, world- wide, free-access rasters from WorldGrids.org. Single and ensemble models were computed using BIOMOD2 package 3.1.47 working in R environment 3.1.0. The addition of HPV improved the quality of single and ensemble models from poor to good and excellent. The quality was the highest for the variants with HPVs based on the distance from the most recent past occurrences. It was mostly affected by the algorithm type, but all HPV traits (minimal recentness, information capacity, model type or the number of the time periods) were significantly important determinants. The addition of HPVs improved the quality of current projections, raising the occurrence probability in regions where the species had occurred before. We conclude that HPV addition enables semi-realistic estimation of the rate of spread and can be applied to the short-term forecasting of invasive or declining species, which also break equal-dispersal probability assumptions.

Good-to-Great Superintendents: An Examination of Jim Collins' Good-to-Great Level Five Leadership Attributes as Demonstrated by the Leadership Behaviors of Superintendents of High-Performing California Public Single-School Districts

ERIC Educational Resources Information Center

Brown, James D.

2010-01-01

Purpose: The purpose of this study was to examine Collins' good-to-great Level Five leadership attributes, as demonstrated by the leadership behaviors of superintendents of high-performing California public single-school districts. Methodology: The researcher used a case study design to conduct this study. Personal interviews were conducted in…

Quality of phenobarbital solid-dosage forms in the urban community of Nouakchott (Mauritania).

PubMed

Laroche, Marie-Laure; Traore, Hamidou; Merle, Louis; Gaulier, Jean-Michel; Viana, Marylene; Preux, Pierre-Marie

2005-08-01

Epilepsy is a major public-health problem in Africa. The quality of available drugs is a limiting factor for an adequate management. The aim of this study was to describe the proportion of poor-quality phenobarbital (PB) solid-dosage forms and evaluate the factors associated with its quality in Nouakchott (Mauritania). A cross-sectional study was carried out within pharmacies, hospitals, and on the parallel market in March 2003. PB samples were bought by a native person and then assayed by a liquid chromatography method. A package was considered to be of good quality if the active-substance average content was between 85 and 115% of the stated content printed on the packet. Forty-five pharmaceutical stores were visited, enabling us to collect 146 samples of PB. Three brand names were available in Nouakchott. They originated from France, Morocco, Senegal, and Egypt. Results: A prevalence of 13.7%[95% confidence interval (CI), 8.8-20.0] of poor-quality PB was found. All samples from Morocco were underdosed. The generic active content was satisfactory, but saccharose, an excipient with a potential side effects, was identified. Two factors associated with the good quality of PB have been put forward: tablets manufactured in France and loose packaging as generics conditioned in such a way were of good quality. This study shows that the quality of antiepileptic drugs in Africa is still worrying. The setting up of medicine quality control in Mauritania is legitimate. Considering the good quality of generic PB and its lower cost, this type of medicine should be promoted in this region.

Structural relations in the effect of convenience food satisfaction and quality of life according to dietary style: Comparative study of singles in metropolitan area of Korea, Japan and China.

PubMed

Kim, Boram; Joo, Nami

2014-06-01

Due to recent changes in social structure, single-person households are on the rise worldwide and therefore the interest in the quality of life of singles is increasing, but the research on the relationships related to their diet-related quality of life is scarce. This research analyzes the structural relations in the effect of convenience food satisfaction and quality of life according to dietary style of Korean, Japanese and Chinese singles. The targets of this study were Korean, Japanese, and Chinese singles, identified as adults between the ages of 25 and 54, having economic capabilities or working and living alone, either legally or in actuality having no partner. A statistical analysis was conducted using SPSS12.0 for Windows and SEM using AMOS 5.0 statistics package. The reliability of these findings was supported by a Cronbach's alpha coefficient of 0.6 and higher for all the factors. In an attempt to study the level of satisfaction with convenience food in accordance to dietary style and the quality of life of singles, a structural equation model was constructed and analyzed. Of the three countries, regarding the effect of dietary style on singles' quality of life, the convenience-oriented style was found to have a negative effect on Korean singles' overall quality of life, but a positive effect on Japanese singles' overall quality of life, and a negative effect on Chinese singles' positive psychological aspect of quality of life. In addition, although Chinese singles have a high level of interest in health, they have an overall high level of satisfaction regarding fast food and its nutritional value. The number of singles in Korea, Japan, and China has been consistently increasing in recent years, and there is a need for continuous interest in their healthy dietary lifestyles in terms of convenience, economy, and taste.

Structural relations in the effect of convenience food satisfaction and quality of life according to dietary style: Comparative study of singles in metropolitan area of Korea, Japan and China

PubMed Central

Kim, Boram

2014-01-01

BACKGROUND/OBJECTIVES Due to recent changes in social structure, single-person households are on the rise worldwide and therefore the interest in the quality of life of singles is increasing, but the research on the relationships related to their diet-related quality of life is scarce. This research analyzes the structural relations in the effect of convenience food satisfaction and quality of life according to dietary style of Korean, Japanese and Chinese singles. SUBJECTS/METHODS The targets of this study were Korean, Japanese, and Chinese singles, identified as adults between the ages of 25 and 54, having economic capabilities or working and living alone, either legally or in actuality having no partner. A statistical analysis was conducted using SPSS12.0 for Windows and SEM using AMOS 5.0 statistics package. The reliability of these findings was supported by a Cronbach's alpha coefficient of 0.6 and higher for all the factors. In an attempt to study the level of satisfaction with convenience food in accordance to dietary style and the quality of life of singles, a structural equation model was constructed and analyzed. RESULTS Of the three countries, regarding the effect of dietary style on singles' quality of life, the convenience-oriented style was found to have a negative effect on Korean singles' overall quality of life, but a positive effect on Japanese singles' overall quality of life, and a negative effect on Chinese singles' positive psychological aspect of quality of life. In addition, although Chinese singles have a high level of interest in health, they have an overall high level of satisfaction regarding fast food and its nutritional value. CONCLUSIONS The number of singles in Korea, Japan, and China has been consistently increasing in recent years, and there is a need for continuous interest in their healthy dietary lifestyles in terms of convenience, economy, and taste. PMID:24944777

Untrained consumer assessment of the eating quality of beef: 1. A single composite score can predict beef quality grades.

PubMed

Bonny, S P F; Hocquette, J-F; Pethick, D W; Legrand, I; Wierzbicki, J; Allen, P; Farmer, L J; Polkinghorne, R J; Gardner, G E

2017-08-01

Quantifying consumer responses to beef across a broad range of demographics, nationalities and cooking methods is vitally important for any system evaluating beef eating quality. On the basis of previous work, it was expected that consumer scores would be highly accurate in determining quality grades for beef, thereby providing evidence that such a technique could be used to form the basis of and eating quality grading system for beef. Following the Australian MSA (Meat Standards Australia) testing protocols, over 19 000 consumers from Northern Ireland, Poland, Ireland, France and Australia tasted cooked beef samples, then allocated them to a quality grade; unsatisfactory, good-every-day, better-than-every-day and premium. The consumers also scored beef samples for tenderness, juiciness, flavour-liking and overall-liking. The beef was sourced from all countries involved in the study and cooked by four different cooking methods and to three different degrees of doneness, with each experimental group in the study consisting of a single cooking doneness within a cooking method for each country. For each experimental group, and for the data set as a whole, a linear discriminant function was calculated, using the four sensory scores which were used to predict the quality grade. This process was repeated using two conglomerate scores which are derived from weighting and combining the consumer sensory scores for tenderness, juiciness, flavour-liking and overall-liking, the original meat quality 4 score (oMQ4) (0.4, 0.1, 0.2, 0.3) and current meat quality 4 score (cMQ4) (0.3, 0.1, 0.3, 0.3). From the results of these analyses, the optimal weightings of the sensory scores to generate an 'ideal meat quality 4 score (MQ4)' for each country were calculated, and the MQ4 values that reflected the boundaries between the four quality grades were determined. The oMQ4 weightings were far more accurate in categorising European meat samples than the cMQ4 weightings, highlighting that tenderness is more important than flavour to the consumer when determining quality. The accuracy of the discriminant analysis to predict the consumer scored quality grades was similar across all consumer groups, 68%, and similar to previously reported values. These results demonstrate that this technique, as used in the MSA system, could be used to predict consumer assessment of beef eating quality and therefore to underpin a commercial eating quality guarantee for all European consumers.

Reputation and Competition in a Hidden Action Model

PubMed Central

Fedele, Alessandro; Tedeschi, Piero

2014-01-01

The economics models of reputation and quality in markets can be classified in three categories. (i) Pure hidden action, where only one type of seller is present who can provide goods of different quality. (ii) Pure hidden information, where sellers of different types have no control over product quality. (iii) Mixed frameworks, which include both hidden action and hidden information. In this paper we develop a pure hidden action model of reputation and Bertrand competition, where consumers and firms interact repeatedly in a market with free entry. The price of the good produced by the firms is contractible, whilst the quality is noncontractible, hence it is promised by the firms when a contract is signed. Consumers infer future quality from all available information, i.e., both from what they know about past quality and from current prices. According to early contributions, competition should make reputation unable to induce the production of high-quality goods. We provide a simple solution to this problem by showing that high quality levels are sustained as an outcome of a stationary symmetric equilibrium. PMID:25329387

Reputation and competition in a hidden action model.

PubMed

Fedele, Alessandro; Tedeschi, Piero

2014-01-01

The economics models of reputation and quality in markets can be classified in three categories. (i) Pure hidden action, where only one type of seller is present who can provide goods of different quality. (ii) Pure hidden information, where sellers of different types have no control over product quality. (iii) Mixed frameworks, which include both hidden action and hidden information. In this paper we develop a pure hidden action model of reputation and Bertrand competition, where consumers and firms interact repeatedly in a market with free entry. The price of the good produced by the firms is contractible, whilst the quality is noncontractible, hence it is promised by the firms when a contract is signed. Consumers infer future quality from all available information, i.e., both from what they know about past quality and from current prices. According to early contributions, competition should make reputation unable to induce the production of high-quality goods. We provide a simple solution to this problem by showing that high quality levels are sustained as an outcome of a stationary symmetric equilibrium.

Quality control process improvement of flexible printed circuit board by FMEA

NASA Astrophysics Data System (ADS)

Krasaephol, Siwaporn; Chutima, Parames

2018-02-01

This research focuses on the quality control process improvement of Flexible Printed Circuit Board (FPCB), centred around model 7-Flex, by using Failure Mode and Effect Analysis (FMEA) method to decrease proportion of defective finished goods that are found at the final inspection process. Due to a number of defective units that were found at the final inspection process, high scraps may be escaped to customers. The problem comes from poor quality control process which is not efficient enough to filter defective products from in-process because there is no In-Process Quality Control (IPQC) or sampling inspection in the process. Therefore, the quality control process has to be improved by setting inspection gates and IPCQs at critical processes in order to filter the defective products. The critical processes are analysed by the FMEA method. IPQC is used for detecting defective products and reducing chances of defective finished goods escaped to the customers. Reducing proportion of defective finished goods also decreases scrap cost because finished goods incur higher scrap cost than work in-process. Moreover, defective products that are found during process can reflect the abnormal processes; therefore, engineers and operators should timely solve the problems. Improved quality control was implemented for 7-Flex production lines from July 2017 to September 2017. The result shows decreasing of the average proportion of defective finished goods and the average of Customer Manufacturers Lot Reject Rate (%LRR of CMs) equal to 4.5% and 4.1% respectively. Furthermore, cost saving of this quality control process equals to 100K Baht.

Mammogram image quality as a potential contributor to disparities in breast cancer stage at diagnosis: an observational study

PubMed Central

2013-01-01

Background In an ongoing study of racial/ethnic disparities in breast cancer stage at diagnosis, we consented patients to allow us to review their mammogram images, in order to examine the potential role of mammogram image quality on this disparity. Methods In a population-based study of urban breast cancer patients, a single breast imaging specialist (EC) performed a blinded review of the index mammogram that prompted diagnostic follow-up, as well as recent prior mammograms performed approximately one or two years prior to the index mammogram. Seven indicators of image quality were assessed on a five-point Likert scale, where 4 and 5 represented good and excellent quality. These included 3 technologist-associated image quality (TAIQ) indicators (positioning, compression, sharpness), and 4 machine associated image quality (MAIQ) indicators (contrast, exposure, noise and artifacts). Results are based on 494 images examined for 268 patients, including 225 prior images. Results Whereas MAIQ was generally high, TAIQ was more variable. In multivariable models of sociodemographic predictors of TAIQ, less income was associated with lower TAIQ (p < 0.05). Among prior mammograms, lower TAIQ was subsequently associated with later stage at diagnosis, even after adjusting for multiple patient and practice factors (OR = 0.80, 95% CI: 0.65, 0.99). Conclusions Considerable gains could be made in terms of increasing image quality through better positioning, compression and sharpness, gains that could impact subsequent stage at diagnosis. PMID:23621946

The quality of life of single mothers making the transition from welfare to work.

PubMed

Cook, Kay; Davis, Elise; Smyth, Paul; McKenzie, Hayley

2009-09-01

This study examined the quality of life of single mothers making the mandatory transition from welfare to work. The Australian government purported that the benefits of making this transition would include higher incomes, better social participation, and improved wellbeing. It is currently unknown, however, how single mothers currently engaged in welfare to work programs evaluate their quality of life. Quality of life scores for 334 single mothers engaged in welfare to work in Australia were compared with normative data. Participants reported significantly lower quality of life scores than the general population for all quality of life domains, highlighting the need to carefully examine welfare to work policies to ensure they promote participants' quality of life.

Patient handover in orthopaedics, improving safety using Information Technology.

PubMed

Pearkes, Tim

2015-01-01

Good inpatient handover ensures patient safety and continuity of care. An adjunct to this is the patient list which is routinely managed by junior doctors. These lists are routinely created and managed within Microsoft Excel or Word. Following the merger of two orthopaedic departments into a single service in a new hospital, it was felt that a number of safety issues within the handover process needed to be addressed. This quality improvement project addressed these issues through the creation and implementation of a new patient database which spanned the department, allowing trouble free, safe, and comprehensive handover. Feedback demonstrated an improved user experience, greater reliability, continuity within the lists and a subsequent improvement in patient safety.

Coronal temperatures of unusually active K-dwarf binary systems

NASA Technical Reports Server (NTRS)

Stern, Robert A.

1994-01-01

We report the results of a ROSAT pointed study of 4 BY Dra systems. Good quality pulse-height spectra are available from all four systems. Except for a required interstellar absorption component in HD 319139, the four systems have remarkably similar x-ray spectra; the two systems BD +22deg.669 and BD +23deg.635 look virtually identical in x rays. Analysis of the 4 x-ray spectra reveals that, in all cases, a single-temperature hot plasma (RS or Mewe) spectra is inadequate to fit the data, and two temperatures are required. We present examples of fitted pulse-height spectra and chi squared contours in kT(sub 1)-kT(sub 2) space.

50-mJ, 1-kHz Yb:YAG thin-disk regenerative amplifier with 969-nm pulsed pumping

NASA Astrophysics Data System (ADS)

Chyla, Michal; Miura, Taisuke; Smrž, Martin; Severova, Patricie; Novak, Ondrej; Endo, Akira; Mocek, Tomas

2014-02-01

We are developing a 100-mJ Yb:YAG thin-disk regenerative amplifier operating at 1-kHz repetition rate pumped at zero-phonon-line (968.825-nm1) and delivering 1-2 ps pulses for EUV plasma sources applicable in science and industry. Recently we achieved the output energy of nearly 50-mJ from a single laser-head cavity with good beam quality (M2<1.2) as well as stable beam-pointing (<4μrad). Applying pulsed pumping with the pulse duration shorter than the upper state lifetime of Yb:YAG helps to reduce the ASE and thermal loading of the thin-disk.

Co/Au multisegmented nanowires: a 3D array of magnetostatically coupled nanopillars

NASA Astrophysics Data System (ADS)

Bran, C.; Ivanov, Yu P.; Kosel, J.; Chubykalo-Fesenko, O.; Vazquez, M.

2017-03-01

Arrays of multisegmented Co/Au nanowires with designed segment lengths and diameters have been prepared by electrodeposition into aluminum oxide templates. The high quality of the Co/Au interface and the crystallographic structure of Co segments have determined by high-resolution transmission electron microscopy. Magnetic hysteresis loop measurements show larger coercivity and squareness of multisegmented nanowires as compared to single segment Co nanowires. The complementary micromagnetic simulations are in good agreement with the experimental results, confirming that the magnetic behavior is defined mainly by magnetostatic coupling between different segments. The proposed structure constitutes an innovative route towards a 3D array of synchronized magnetic nano-oscillators with large potential in nanoelectronics.

Looking for trees in the forest: summary tree from posterior samples

PubMed Central

2013-01-01

Background Bayesian phylogenetic analysis generates a set of trees which are often condensed into a single tree representing the whole set. Many methods exist for selecting a representative topology for a set of unrooted trees, few exist for assigning branch lengths to a fixed topology, and even fewer for simultaneously setting the topology and branch lengths. However, there is very little research into locating a good representative for a set of rooted time trees like the ones obtained from a BEAST analysis. Results We empirically compare new and known methods for generating a summary tree. Some new methods are motivated by mathematical constructions such as tree metrics, while the rest employ tree concepts which work well in practice. These use more of the posterior than existing methods, which discard information not directly mapped to the chosen topology. Using results from a large number of simulations we assess the quality of a summary tree, measuring (a) how well it explains the sequence data under the model and (b) how close it is to the “truth”, i.e to the tree used to generate the sequences. Conclusions Our simulations indicate that no single method is “best”. Methods producing good divergence time estimates have poor branch lengths and lower model fit, and vice versa. Using the results presented here, a user can choose the appropriate method based on the purpose of the summary tree. PMID:24093883

Ultrathin Single‐Crystalline Boron Nanosheets for Enhanced Electro‐Optical Performances

PubMed Central

Xu, Junqi; Chang, Yangyang; Gan, Lin; Ma, Ying

2015-01-01

Large‐scale single‐crystalline ultrathin boron nanosheets (UBNSs, ≈10 nm) are fabricated through an effective vapor–solid process via thermal decomposition of diborane. The UBNSs have obvious advantages over thicker boron nanomaterials in many aspects. Specifically, the UBNSs demonstrate excellent field emission performances with a low turn‐on field, E to, of 3.60 V μm−1 and a good stability. Further, the dependence of (turn‐on field) E to/(threshold field) E thr and effective work function, Φ e, on temperature is investigated and the possible mechanism of temperature‐dependent field emission phenomenon has been discussed. Moreover, electronic transport in a single UBNS reveals it to be an intrinsic p‐type semiconductor behavior with carrier mobility about 1.26 × 10−1 cm2 V−1 s−1, which is the best data in reported works. Interestingly, a multiconductive mechanism coexisting phenomenon has been explored based on the study of temperature‐dependent conductivity behavior of the UBNSs. Besides, the photodetector device fabricated from single‐crystalline UBNS demonstrates good sensitivity, reliable stability, and fast response, obviously superior to other reported boron nanomaterials. Such superior electronic‐optical performances are originated from the high quality of single crystal and large specific surface area of the UBNSs, suggesting the potential applications of the UBNSs in field‐emitters, interconnects, integrated circuits, and optoelectronic devices. PMID:27980947

Looking for trees in the forest: summary tree from posterior samples.

PubMed

Heled, Joseph; Bouckaert, Remco R

2013-10-04

Bayesian phylogenetic analysis generates a set of trees which are often condensed into a single tree representing the whole set. Many methods exist for selecting a representative topology for a set of unrooted trees, few exist for assigning branch lengths to a fixed topology, and even fewer for simultaneously setting the topology and branch lengths. However, there is very little research into locating a good representative for a set of rooted time trees like the ones obtained from a BEAST analysis. We empirically compare new and known methods for generating a summary tree. Some new methods are motivated by mathematical constructions such as tree metrics, while the rest employ tree concepts which work well in practice. These use more of the posterior than existing methods, which discard information not directly mapped to the chosen topology. Using results from a large number of simulations we assess the quality of a summary tree, measuring (a) how well it explains the sequence data under the model and (b) how close it is to the "truth", i.e to the tree used to generate the sequences. Our simulations indicate that no single method is "best". Methods producing good divergence time estimates have poor branch lengths and lower model fit, and vice versa. Using the results presented here, a user can choose the appropriate method based on the purpose of the summary tree.

48 CFR 846.408 - Single-agency assignments of Government contract quality assurance.

Code of Federal Regulations, 2010 CFR

2010-10-01

... of Government contract quality assurance. 846.408 Section 846.408 Federal Acquisition Regulations System DEPARTMENT OF VETERANS AFFAIRS CONTRACT MANAGEMENT QUALITY ASSURANCE Government Contract Quality Assurance 846.408 Single-agency assignments of Government contract quality assurance. ...

Bone marrow solid core biopsy needle: a critical assessment of the utility, benefits and limitations of the instruments employed in current day haematology and oncology.

PubMed

Islam, Anwarul

2018-06-01

The optimal clinical evaluation of the bone marrow requires an examination of air-dried and well-stained films of the aspirated tissue along with a histopathological evaluation of adequately processed and properly stained core biopsy specimens. A bone marrow evaluation can be essential in establishing a diagnosis, determining the efficacy of treatment in haematological disorders and to monitor haematological status of patients following bone marrow/stem cell transplantation. It is also an essential component of the staging process for newly diagnosed malignancies. Currently available bone marrow aspiration needles are quite satisfactory and if properly used provide good-quality specimens for morphological evaluation. However, if a bone marrow core biopsy is concerned, several needles are currently in use but not all of them provide good-quality biopsy specimens for histological evaluation or are user friendly. We have compared the recently introduced Moeller Medical single use bone marrow core biopsy needle with the Jamshidi needle with marrow acquisition cradle (CareFusion), J-needle (Cardinal Health) and OnControl device (Vidacare). It is concluded that the Moeller Medical needle system has definite advantages over others and is recommended for routine use. © Article author(s) (or their employer(s) unless otherwise stated in the text of the article) 2018. All rights reserved. No commercial use is permitted unless otherwise expressly granted.

Color enhancement and image defogging in HSI based on Retinex model

NASA Astrophysics Data System (ADS)

Gao, Han; Wei, Ping; Ke, Jun

2015-08-01

Retinex is a luminance perceptual algorithm based on color consistency. It has a good performance in color enhancement. But in some cases, the traditional Retinex algorithms, both Single-Scale Retinex(SSR) and Multi-Scale Retinex(MSR) in RGB color space, do not work well and will cause color deviation. To solve this problem, we present improved SSR and MSR algorithms. Compared to other Retinex algorithms, we implement Retinex algorithms in HSI(Hue, Saturation, Intensity) color space, and use a parameter αto improve quality of the image. Moreover, the algorithms presented in this paper has a good performance in image defogging. Contrasted with traditional Retinex algorithms, we use intensity channel to obtain reflection information of an image. The intensity channel is processed using a Gaussian center-surround image filter to get light information, which should be removed from intensity channel. After that, we subtract the light information from intensity channel to obtain the reflection image, which only includes the attribute of the objects in image. Using the reflection image and a parameter α, which is an arbitrary scale factor set manually, we improve the intensity channel, and complete the color enhancement. Our experiments show that this approach works well compared with existing methods for color enhancement. Besides a better performance in color deviation problem and image defogging, a visible improvement in the image quality for human contrast perception is also observed.

Current management of long-term survivors of biliary atresia: over 40 years of experience in a single center and review of the literature.

PubMed

Sasaki, Hideyuki; Tanaka, Hiromu; Nio, Masaki

2017-12-01

Owing to several therapeutic advancements, more patients with biliary atresia now survive into adulthood while retaining their native liver. However, the optimal strategy for long-term management of such patients remains unclear. Aiming to establish the current management strategies, we reviewed previous reports of long-term outcome of BA who underwent surgery at our institution as well as the relevant literature, focusing particularly on the treatment of late complications. Approximately 30-40% of long-term survivors of biliary atresia who retain their native liver exhibit late sequelae such as cholangitis and portal hypertension. Early and appropriate intervention with Kasai portoenterostomy is essential for ensuring long-term survival with good quality of life. In our hospital, the current standard for Kasai portoenterostomy involves dissecting the fibrous remnants along the porta hepatis, just on the level of the liver capsule. Cholangitis is an important late complication in biliary atresia, and the possibility of mechanical obstruction of the biliary drainage route or deformity of the intrahepatic bile ducts with or without gallstones should be thoroughly evaluated in patients with intractable cholangitis. Regarding portal hypertension, appropriate interventions such as endoscopic variceal treatment and partial splenic embolization are considered to provide good quality of life when hepatic function is preserved. Appropriate therapeutic management is strongly recommended in selected patients with late complications.

Blastocyst utilization rates after continuous culture in two commercial single-step media: a prospective randomized study with sibling oocytes.

PubMed

Sfontouris, Ioannis A; Kolibianakis, Efstratios M; Lainas, George T; Venetis, Christos A; Petsas, George K; Tarlatzis, Basil C; Lainas, Tryfon G

2017-10-01

The aim of this study is to determine whether blastocyst utilization rates are different after continuous culture in two different commercial single-step media. This is a paired randomized controlled trial with sibling oocytes conducted in infertility patients, aged ≤40 years with ≥10 oocytes retrieved assigned to blastocyst culture and transfer. Retrieved oocytes were randomly allocated to continuous culture in either Sage one-step medium (Origio) or Continuous Single Culture (CSC) medium (Irvine Scientific) without medium renewal up to day 5 post oocyte retrieval. Main outcome measure was the proportion of embryos suitable for clinical use (utilization rate). A total of 502 oocytes from 33 women were randomly allocated to continuous culture in either Sage one-step medium (n = 250) or CSC medium (n = 252). Fertilization was performed by either in vitro fertilization or intracytoplasmic sperm injection, and embryo transfers were performed on day 5. Two patients had all blastocysts frozen due to the occurrence of severe ovarian hyperstimulation syndrome. Fertilization and cleavage rates, as well as embryo quality on day 3, were similar in the two media. Blastocyst utilization rates (%, 95% CI) [55.4% (46.4-64.1) vs 54.7% (44.9-64.6), p = 0.717], blastocyst formation rates [53.6% (44.6-62.5) vs 51.9 (42.2-61.6), p = 0.755], and proportion of good quality blastocysts [36.8% (28.1-45.4) vs 36.1% (27.2-45.0), p = 0.850] were similar in Sage one-step and CSC media, respectively. Continuous culture of embryos in Sage one-step and CSC media is associated with similar blastocyst development and utilization rates. Both single-step media appear to provide adequate support during in vitro preimplantation embryo development. Whether these observations are also valid for other continuous single medium protocols remains to be determined. NCT02302638.

Correlates of a Good Death and the Impact of Hospice Involvement: Findings from the National Survey of Households Affected by Cancer

PubMed Central

Cagle, John G.; Pek, Jolynn; Clifford, Maggie; Guralnik, Jack; Zimmerman, Sheryl

2017-01-01

Purpose Knowing how to improve the dying experience for patients with end-stage cancer is essential for cancer professionals. However, there is little evidence on the relationship between clinically relevant factors and quality of death. Also, while hospice has been linked with improved outcomes, our understanding of factors that contribute to a “good death” when hospice is involved remains limited. This study (1) identified correlates of a good death; and, (2) provided evidence on the impact of hospice on quality of death. Methods Using data from a survey of US households affected by cancer (N=930, response rate 51%), we fit regression models with a subsample of 158 respondents who had experienced the death of a family member with cancer. Measures included quality of death (good/bad) and clinically relevant factors including: hospice involvement, symptoms during treatment, whether wishes were followed, provider knowledge/expertise and compassion. Results Respondents were 60% female, 89% White, and averaged 57 years old. Decedents were most often a respondent's spouse (46%). While 73% of respondents reported a good death, Hispanics were less likely to experience good death (p=.007). Clinically relevant factors, including hospice, were associated with good death (p<.05) -- an exception being whether the physician said the cancer was curable/fatal. With adjustments, perceptions of provider knowledge/expertise was the only clinical factor that remained associated with good death. Conclusions Enhanced provider training/communication, referrals to hospice and greater attention to symptom management may facilitate improved quality of dying. Additionally, the cultural relevance of the concept of a “good death” warrants further research. PMID:25194877

Relationship between single nucleotide polymorphism of glycogen synthase gene of Pacific oyster Crassostrea gigas and its glycogen content

NASA Astrophysics Data System (ADS)

Liu, Siwei; Li, Qi; Yu, Hong; Kong, Lingfeng

2017-02-01

Glycogen is important not only for the energy supplementary of oysters, but also for human consumption. High glycogen content can improve the stress survival of oyster. A key enzyme in glycogenesis is glycogen synthase that is encoded by glycogen synthase gene GYS. In this study, the relationship between single nucleotide polymorphisms (SNPs) in coding regions of Crassostrea gigas GYS (Cg-GYS) and individual glycogen content was investigated with 321 individuals from five full-sib families. Single-strand conformation polymorphism (SSCP) procedure was combined with sequencing to confirm individual SNP genotypes of Cg-GYS. Least-square analysis of variance was performed to assess the relationship of variation in glycogen content of C. gigas with single SNP genotype and SNP haplotype. As a consequence, six SNPs were found in coding regions to be significantly associated with glycogen content ( P < 0.01), from which we constructed four main haplotypes due to linkage disequilibrium. Furthermore, the most effective haplotype H2 (GAGGAT) had extremely significant relationship with high glycogen content ( P < 0.0001). These findings revealed the potential influence of Cg-GYS polymorphism on the glycogen content and provided molecular biological information for the selective breeding of good quality traits of C. gigas.

Fuel Injector: Air swirl characterization aerothermal modeling, phase 2, volume 2

NASA Technical Reports Server (NTRS)

Nikjooy, M.; Mongia, H. C.; Mcdonell, V. G.; Samuelson, G. S.

1993-01-01

A well integrated experimental/analytical investigation was conducted to provide benchmark quality data relevant to prefilming type airblast fuel nozzle and its interaction with combustor dome air swirler. The experimental investigation included a systematic study of both single-phase flows that involved single and twin co-axial jets with and without swirl. A two-component Phase Doppler Particle Analyzer (PDPA) equipment was used to document the interaction of single and co-axial air jets with glass beads that simulate nonevaporating spray and simultaneously avoid the complexities associated with fuel atomization processes and attendant issues about the specification of relevant boundary conditions. The interaction of jets with methanol spray produced by practical airblast nozzle was also documented in the spatial domain of practical interest. Model assessment activities included the use of three turbulence models (k-epsilon, algebraic second moment (ASM) and differential second moment (DSM)) for the carrier phase, deterministic or stochastic Lagrangian treatment of the dispersed phase, and advanced numerical schemes. Although qualitatively good comparison with data was obtained for most of the cases investigated, the model deficiencies in regard to modeled dissipation rate transport equation, single length scale, pressure-strain correlation, and other critical closure issues need to be resolved before one can achieve the degree of accuracy required to analytically design combustion systems.

Fuel injector: Air swirl characterization aerothermal modeling, phase 2, volume 1

NASA Technical Reports Server (NTRS)

Nikjooy, M.; Mongia, H. C.; Mcdonell, V. G.; Samuelsen, G. S.

1993-01-01

A well integrated experimental/analytical investigation was conducted to provide benchmark quality relevant to a prefilming type airblast fuel nozzle and its interaction with the combustor dome air swirler. The experimental investigation included a systematic study of both single-phase flows that involved single and twin co-axial jets with and without swirl. A two-component Phase Doppler Particle Analyzer (PDPA) was used to document the interaction of single and co-axial air jets with glass beads that simulate nonevaporating spray and simultaneously avoid the complexities associated with fuel atomization processes and attendant issues about the specification of relevant boundary conditions. The interaction of jets with methanol spray produced by practical airblast nozzle was also documented in the spatial domain of practical interest. Model assessment activities included the use of three turbulence models (k-epsilon, algebraic second moment (ASM), and differential second moment (DSM)) for the carrier phase, deterministic or stochastic Lagrangian treatment of the dispersed phase, and advanced numerical schemes. Although qualitatively good comparison with data was obtained for most of the cases investigated, the model deficiencies in regard to modeled dissipation rate transport equation, single length scale, pressure-strain correlation, and other critical closure issues need to be resolved before one can achieve the degree of accuracy required to analytically design combustion systems.

Development of a bioanalytical test battery for water quality monitoring: Fingerprinting identified micropollutants and their contribution to effects in surface water.

PubMed

Neale, Peta A; Altenburger, Rolf; Aït-Aïssa, Selim; Brion, François; Busch, Wibke; de Aragão Umbuzeiro, Gisela; Denison, Michael S; Du Pasquier, David; Hilscherová, Klára; Hollert, Henner; Morales, Daniel A; Novák, Jiří; Schlichting, Rita; Seiler, Thomas-Benjamin; Serra, Helene; Shao, Ying; Tindall, Andrew J; Tollefsen, Knut Erik; Williams, Timothy D; Escher, Beate I

2017-10-15

Surface waters can contain a diverse range of organic pollutants, including pesticides, pharmaceuticals and industrial compounds. While bioassays have been used for water quality monitoring, there is limited knowledge regarding the effects of individual micropollutants and their relationship to the overall mixture effect in water samples. In this study, a battery of in vitro bioassays based on human and fish cell lines and whole organism assays using bacteria, algae, daphnids and fish embryos was assembled for use in water quality monitoring. The selection of bioassays was guided by the principles of adverse outcome pathways in order to cover relevant steps in toxicity pathways known to be triggered by environmental water samples. The effects of 34 water pollutants, which were selected based on hazard quotients, available environmental quality standards and mode of action information, were fingerprinted in the bioassay test battery. There was a relatively good agreement between the experimental results and available literature effect data. The majority of the chemicals were active in the assays indicative of apical effects, while fewer chemicals had a response in the specific reporter gene assays, but these effects were typically triggered at lower concentrations. The single chemical effect data were used to improve published mixture toxicity modeling of water samples from the Danube River. While there was a slight increase in the fraction of the bioanalytical equivalents explained for the Danube River samples, for some endpoints less than 1% of the observed effect could be explained by the studied chemicals. The new mixture models essentially confirmed previous findings from many studies monitoring water quality using both chemical analysis and bioanalytical tools. In short, our results indicate that many more chemicals contribute to the biological effect than those that are typically quantified by chemical monitoring programs or those regulated by environmental quality standards. This study not only demonstrates the utility of fingerprinting single chemicals for an improved understanding of the biological effect of pollutants, but also highlights the need to apply bioassays for water quality monitoring in order to prevent underestimation of the overall biological effect. Copyright © 2017 Elsevier Ltd. All rights reserved.

[Implementation of good quality and safety practices. Descriptive study in a occupational mutual health centre].

PubMed

Manzanera, R; Plana, M; Moya, D; Ortner, J; Mira, J J

2016-01-01

To describe the level of implementation of quality and safety good practice elements in a Mutual Society health centre. A Cross-sectional study was conducted to assess the level of implementation of good practices using a questionnaire. Some quality dimensions were also assessed (scale 0 to 10) by a set of 87 quality coordinators of health centres and a random sample of 54 healthcare professionals working in small centres. Seventy quality coordinators and 27 professionals replied (response rates 80% and 50%, respectively. There were no differences in the assessment of quality attributes between both groups. They identified as areas for improvement: use of practice guidelines (7.6/10), scientific and technical skills (7.5/10), and patient satisfaction (7.7/10). Availability and accessibility to clinical reports, informed consent, availability of hydro-alcoholic solution, and to record allergies, were considered of high importance to be implemented, with training and research, improvements in equipment and technology plans, adherence to clinical practice guidelines and the preparation of risk maps, being of less importance. The good practices related to equipment and resources have a higher likelihood to be implemented, meanwhile those related to quality and safety attitudes have more barriers before being implemented. The mutual has a similar behaviour than other healthcare institutions. Copyright © 2015 SECA. Published by Elsevier Espana. All rights reserved.

Single-source chest-abdomen-pelvis cancer staging on a third generation dual-source CT system: comparison of automated tube potential selection to second generation dual-source CT.

PubMed

Park, Clara; Gruber-Rouh, Tatjana; Leithner, Doris; Zierden, Amelie; Albrecht, Mortiz H; Wichmann, Julian L; Bodelle, Boris; Elsabaie, Mohamed; Scholtz, Jan-Erik; Kaup, Moritz; Vogl, Thomas J; Beeres, Martin

2016-10-10

Evaluation of latest generation automated attenuation-based tube potential selection (ATPS) impact on image quality and radiation dose in contrast-enhanced chest-abdomen-pelvis computed tomography examinations for gynaecologic cancer staging. This IRB approved single-centre, observer-blinded retrospective study with a waiver for informed consent included a total of 100 patients with contrast-enhanced chest-abdomen-pelvis CT for gynaecologic cancer staging. All patients were examined with activated ATPS for adaption of tube voltage to body habitus. 50 patients were scanned on a third-generation dual-source CT (DSCT), and another 50 patients on a second-generation DSCT. Predefined image quality setting remained stable between both groups at 120 kV and a current of 210 Reference mAs. Subjective image quality assessment was performed by two blinded readers independently. Attenuation and image noise were measured in several anatomic structures. Signal-to-noise ratio (SNR) was calculated. For the evaluation of radiation exposure, CT dose index (CTDI vol ) values were compared. Diagnostic image quality was obtained in all patients. The median CTDI vol (6.1 mGy, range 3.9-22 mGy) was 40 % lower when using the algorithm compared with the previous ATCM protocol (median 10.2 mGy · cm, range 5.8-22.8 mGy). A reduction in potential to 90 kV occurred in 19 cases, a reduction to 100 kV in 23 patients and a reduction to 110 kV in 3 patients of our experimental cohort. These patients received significantly lower radiation exposure compared to the former used protocol. Latest generation automated ATPS on third-generation DSCT provides good diagnostic image quality in chest-abdomen-pelvis CT while average radiation dose is reduced by 40 % compared to former ATPS protocol on second-generation DSCT.

Comparison between faculty and students perspectives on the qualities of a good medical teacher: A cross-sectional study.

PubMed

Al-Mohaimeed, Abdulrahman A

2018-01-01

This study aimed to explore faculty and students perceptions on the qualities of good medical teachers, and to determine whether the opinions of faculty and students differed. Two quantitative surveys were performed at Qassim University College of Medicine using a pretested self-administered questionnaire distributed to the faculty and students of the college. It captured their opinions about qualities and attributes of good teachers. Each item was measured on a 5-point Likert scale. Data were entered and analyzed using SPSS. A total of 90 faculty and 356 students responded with a response rate of 64%. Overall scores on the performance and personality scales were similar between faculty and students. Faculty and students agreed that "organizes good lectures/use of audiovisual aids" and "expert on the subject/knowledgeable" are important attributes and that telling jokes and the sense of humor or sharing personal experiences are not as important. Students felt it is important for an educator to be respectful, good planner and examiner, whereas faculty members felt that communication skills are of high importance. Faculty development programs should be designed to help faculty develop and improve on the identified qualities.

Asymmetrical local adaptation of maize landraces along an altitudinal gradient.

PubMed

Mercer, Kristin; Martínez-Vásquez, Ángel; Perales, Hugo R

2008-08-01

Crop landraces are managed populations that evolve in response to gene flow and selection. Cross-pollination among fields, seed sharing by farmers, and selection by management and environmental conditions play roles in shaping crop characteristics. We used common gardens to explore the local adaptation of maize (Zea mays ssp. mays) landrace populations from Chiapas, Mexico to altitude. We sowed seeds of 21 populations from three altitudinal ranges in two common gardens and measured two characteristics that estimate fitness: likelihood of producing good quality seed and the total mass of good quality seed per plant. The probability of lowland plants producing good quality seed was invariably high regardless of garden, while highland landraces were especially sensitive to altitude. Their likelihood of producing good seed quadrupled in the highland site. The mass of good quality seed showed a different pattern, with lowland landraces producing 25% less seed mass than the other types at high elevations. Combining these two measures of fitness revealed that the highland landraces were clearly adapted to highland sites, while lowland and midland landraces appear more adapted to the midland site. We discuss this asymmetry in local adaptation in light of climate change and in situ conservation of crop genetic resources.

Effects of resource quality on the population dynamics of the Indian meal moth Plodia interpunctella and its granulovirus.

PubMed

McVean, Ross I; Sait, Steve M; Thompson, David J; Begon, Mike

2002-03-01

Although the Plodia interpunctella-granulovirus system is one of the most studied models for insect-pathogen interactions, there are relatively few precise data on the dynamics of the virus in coexisting populations of these two organisms. Previous work has suggested that resource quality, in terms of the diet supplied to P. interpunctella, has a strong effect on the population dynamics of host and pathogen. Here we investigate the impact of resource-dependent host patterns of abundance on pathogen dynamics and prevalence. In the laboratory, three populations of P. interpunctella feeding on a good quality food and infected with a granulovirus were compared with three populations also infected with a granulovirus but feeding on poor quality food. Populations feeding on good quality food produced larger adult moths, and had greater numbers of adult moths, healthy larvae, and virus-infected larvae. A higher proportion of larvae in these good quality populations were infected with virus, and adult moths exhibited cyclic fluctuations in abundance, unlike those on poor quality food. This cyclic behaviour was shown to be associated with cycles in the age structure of the larval population. Previous theoretical work suggests that these cycles may result from asymmetric competition between young and old larvae. Cyclic fluctuations in the proportion of infected larvae, that occurred on good, but not on poor quality food, were also shown to be related to cycles in the age structure of the larval population.

Health-Related Quality of Life after Restorative Proctocolectomy: A Cross-Sectional Study.

PubMed

Helavirta, I; Hyöty, M; Oksanen, P; Huhtala, H; Haapamäki, J; Aitola, P

2018-05-01

Patients undergoing restorative proctocolectomy have often suffered from active ulcerative colitis which should be remembered when assessing quality of life after operation. The aim of this study was to explore health-related quality of life after restorative proctocolectomy in those with poor or good pouch function and to compare that to patients with active or inactive ulcerative colitis and to the general population. Altogether, 282 restorative proctocolectomy patients were investigated. The control group comprised 408 ulcerative colitis patients from the local register. Generic 15D and disease-specific inflammatory bowel disease questionnaire health-related quality of life instruments were used. Population-based data were available for 15D. Pouch function was evaluated with Öresland score and colitis activity with simple clinical colitis activity index. 15D results showed that patients with good pouch function had health-related quality of life similar to that of the general population. Health-related quality of life with inflammatory bowel disease questionnaire was equally good in patients with good pouch function (n = 131; 70%) and inactive colitis (n = 95; 63%), and equally impaired in patients with poor pouch function (n = 56; 30%) and active colitis (n = 18; 12%). The majority of patients had health-related quality of life comparable to that in general population. Most patients with active ulcerative colitis are likely to improve their health-related quality of life after successful surgery. These findings are important when informing colitis patients about life after surgery.

Patient Safety Reporting Systems: Sustained Quality Improvement Using a Multidisciplinary Team and “Good Catch” Awards

PubMed Central

Herzer, Kurt R.; Mirrer, Meredith; Xie, Yanjun; Steppan, Jochen; Li, Matthew; Jung, Clinton; Cover, Renee; Doyle, Peter A.; Mark, Lynette J.

2014-01-01

Background Since 1999, hospitals have made substantial commitments to healthcare quality and patient safety through individual initiatives of executive leadership involvement in quality, investments in safety culture, education and training for medical students and residents in quality and safety, the creation of patient safety committees, and implementation of patient safety reporting systems. Cohesive quality and safety approaches have become comprehensive programs to identify and mitigate hazards that could harm patients. This article moves to the next level with an intense refocusing of attention on one of the individual components of a comprehensive program--the patient safety reporting system—with a goal of maximized usefulness of the reports and long-term sustainability of quality improvements arising from them. Methods A six-phase framework was developed to deal with patient safety hazards: identify, report, analyze, mitigate, reward, and follow up. Unique features of this process included a multidisciplinary team to review reports, mitigate hazards, educate and empower providers, recognize the identifying/reporting individuals or groups with “Good Catch” awards, and follow up to determine if quality improvements were sustained over time. Results To date, 29 patient safety hazards have gone through this process with “Good Catch” awards being granted at our institution. These awards were presented at various times over the past 4 years since the process began in 2008. Follow-up revealed that 86% of the associated quality improvements have been sustained over time since the awards were given. We present the details of two of these “Good Catch” awards: vials of heparin with an unusually high concentration of the drug that posed a potential overdose hazard and a rapid infusion device that resisted practitioner control. Conclusion A multidisciplinary team's analysis and mitigation of hazards identified in a patient safety reporting system, positive recognition with a “Good Catch” award, education of practitioners, and long-term follow-up resulted in an outcome of sustained quality improvement initiatives. PMID:22946251

Perceptual and Acoustic Analyses of Good Voice Quality in Male Radio Performers.

PubMed

Warhurst, Samantha; Madill, Catherine; McCabe, Patricia; Ternström, Sten; Yiu, Edwin; Heard, Robert

2017-03-01

Good voice quality is an asset to professional voice users, including radio performers. We examined whether (1) voices could be reliably categorized as good for the radio and (2) these categories could be predicted using acoustic measures. Male radio performers (n = 24) and age-matched male controls performed "The Rainbow Passage" as if presenting on the radio. Voice samples were rated using a three-stage paired-comparison paradigm by 51 naive listeners and perceptual categories were identified (Study 1), and then analyzed for fundamental frequency, long-term average spectrum, cepstral peak prominence, and pause or spoken-phrase duration (Study 2). Study 1: Good inter-judge reliability was found for perceptual judgments of the best 15 voices (good for radio category, 14/15 = radio performers), but agreement on the remaining 33 voices (unranked category) was poor. Study 2: Discriminant function analyses showed that the SD standard deviation of sounded portion duration, equivalent sound level, and smoothed cepstral peak prominence predicted membership of categories with moderate accuracy (R 2  = 0.328). Radio performers are heterogeneous for voice quality; good voice quality was judged reliably in only 14 out of 24 radio performers. Current acoustic analyses detected some of the relevant signal properties that were salient in these judgments. More refined perceptual analysis and the use of other perceptual methods might provide more information on the complex nature of judging good voices. Copyright © 2017 The Voice Foundation. Published by Elsevier Inc. All rights reserved.

Reproducibility in science: improving the standard for basic and preclinical research.

PubMed

Begley, C Glenn; Ioannidis, John P A

2015-01-02

Medical and scientific advances are predicated on new knowledge that is robust and reliable and that serves as a solid foundation on which further advances can be built. In biomedical research, we are in the midst of a revolution with the generation of new data and scientific publications at a previously unprecedented rate. However, unfortunately, there is compelling evidence that the majority of these discoveries will not stand the test of time. To a large extent, this reproducibility crisis in basic and preclinical research may be as a result of failure to adhere to good scientific practice and the desperation to publish or perish. This is a multifaceted, multistakeholder problem. No single party is solely responsible, and no single solution will suffice. Here we review the reproducibility problems in basic and preclinical biomedical research, highlight some of the complexities, and discuss potential solutions that may help improve research quality and reproducibility. © 2015 American Heart Association, Inc.

Metal-induced rapid transformation of diamond into single and multilayer graphene on wafer scale

DOE PAGES

Berman, Diana; Deshmukh, Sanket; Narayanan, Badri; ...

2016-07-04

The degradation of intrinsic properties of graphene during the transfer process constitutes a major challenge in graphene device fabrication, stimulating the need for direct growth of graphene on dielectric substrates. Previous attempts of metal-induced transformation of diamond and silicon carbide into graphene suffers from metal contamination and inability to scale graphene growth over large area. Here in this article, we introduce a direct approach to transform polycrystalline diamond into high-quality graphene layers on wafer scale (4 inch in diameter) using a rapid thermal annealing process facilitated by a nickel, Ni thin film catalyst on top. We show that the processmore » can be tuned to grow single or multilayer graphene with good electronic properties. Molecular dynamics simulations elucidate the mechanism of graphene growth on polycrystalline diamond. Additionally, we demonstrate the lateral growth of free-standing graphene over micron-sized pre-fabricated holes, opening exciting opportunities for future graphene/diamond-based electronics.« less

Metal-induced rapid transformation of diamond into single and multilayer graphene on wafer scale

DOE Office of Scientific and Technical Information (OSTI.GOV)

Berman, Diana; Deshmukh, Sanket; Narayanan, Badri

The degradation of intrinsic properties of graphene during the transfer process constitutes a major challenge in graphene device fabrication, stimulating the need for direct growth of graphene on dielectric substrates. Previous attempts of metal-induced transformation of diamond and silicon carbide into graphene suffers from metal contamination and inability to scale graphene growth over large area. Here in this article, we introduce a direct approach to transform polycrystalline diamond into high-quality graphene layers on wafer scale (4 inch in diameter) using a rapid thermal annealing process facilitated by a nickel, Ni thin film catalyst on top. We show that the processmore » can be tuned to grow single or multilayer graphene with good electronic properties. Molecular dynamics simulations elucidate the mechanism of graphene growth on polycrystalline diamond. Additionally, we demonstrate the lateral growth of free-standing graphene over micron-sized pre-fabricated holes, opening exciting opportunities for future graphene/diamond-based electronics.« less

Dispersion and dispersion slope compensation impact on high channel bit rate optical signal transmission degradation

NASA Astrophysics Data System (ADS)

Hamidine, Mahamadou; Yuan, Xiuhua

2011-11-01

In this article a numerical simulation is carried out on a single channel optical transmission system with channel bit rate greater than 40 Gb/s to investigate optical signal degradation due to the impact of dispersion and dispersion slope of both transmitting and dispersion compensating fibers. By independently varying the input signal power and the dispersion slope of both transmitting and dispersion compensating fibers of an optical link utilizing a channel bit rate of 86 Gb/s, a good quality factor (Q factor) is obtained with a dispersion slope compensation ratio change of +/-10% for a faithful transmission. With this ratio change a minimum Q factor of 16 dB is obtained in the presence of amplifier noise figure of 5 dB and fiber nonlinearities effects at input signal power of 5 dBm and 3 spans of 100 km standard single mode fiber with a dispersion (D) value of 17 ps/nm.km.

Observation of stimulated emission from a single Fe-doped AlN triangular fiber at room temperature

PubMed Central

Jiang, Liangbao; Jin, Shifeng; Wang, Wenjun; Zuo, Sibin; Li, Zhilin; Wang, Shunchong; Zhu, Kaixing; Wei, Zhiyi; Chen, Xiaolong

2015-01-01

Aluminum nitride (AlN) is a well known wide-band gap semiconductor that has been widely used in fabricating various ultraviolet photo-electronic devices. Herein, we demonstrate that a fiber laser can be achieved in Fe-doped AlN fiber where Fe is the active ion and AlN fiber is used as the gain medium. Fe-doped single crystal AlN fibers with a diameter of 20–50 μm and a length of 0.5–1 mm were preparated successfully. Stimulated emission (peak at about 607 nm and FWHM ~0.2 nm) and a long luminescence lifetime (2.5 ms) were observed in the fibers by a 532nm laser excitation at room temperature. The high quality long AlN fibers are also found to be good optical waveguides. This kind of fiber lasers may possess potential advantages over traditional fiber lasers in enhancing power output and extending laser wavelengths from infrared to visible regime. PMID:26647969

Ab Initio Studies of Fluorine and Chlorine Oxide and Nitrogen Oxide Species of Interest in Stratospheric Chemistry

NASA Technical Reports Server (NTRS)

Lee, Timothy J.; Langhoff, Stephen R. (Technical Monitor)

1995-01-01

The quality of fundamental vibrational frequencies determined using the CCSD(T) method (singles and doubles coupled-cluster theory plus a perturbational estimate of the effects of connected triple excitations) is shown to be very good, usually predicting band centers to within plus or minus 8 per centimeter. This approach is applied to several molecules of interest in atmospheric chemistry, such as HNO, cis-FONO, cis-ClONO, and ClOOH. The HNO molecule displays a large and unusual anharmonicity in the H-N stretch. For the calculation of ultraviolet (UV) spectra, the linear response CCSD (LRCCSD) approach (which is equivalent to EOM-CCSD) has been shown to yield vertical excitation energies that are accurate to approximately equal to 0.1 eV for singly excited electronic states. This method together with more approximate methods is used to examine the UV spectra of several molecules important in stratospheric chemistry, including HOCl, Cl2O, ClONO2, HONO2, ClOOCl, ClOOH, and HOOH.

Clinical application of Half Fourier Acquisition Single Shot Turbo Spin Echo (HASTE) imaging accelerated by simultaneous multi-slice acquisition.

PubMed

Schulz, Jenni; P Marques, José; Ter Telgte, Annemieke; van Dorst, Anouk; de Leeuw, Frank-Erik; Meijer, Frederick J A; Norris, David G

2018-01-01

As a single-shot sequence with a long train of refocusing pulses, Half-Fourier Acquisition Single-Shot Turbo-Spin-Echo (HASTE) suffers from high power deposition limiting use at high resolutions and high field strengths, particularly if combined with acceleration techniques such as simultaneous multi-slice (SMS) imaging. Using a combination of multiband (MB)-excitation and PINS-refocusing pulses will effectively accelerate the acquisition time while staying within the SAR limitations. In particular, uncooperative and young patients will profit from the speed of the MB-PINS HASTE sequence, as clinical diagnosis can be possible without sedation. Materials and MethodsMB-excitation and PINS-refocusing pulses were incorporated into a HASTE-sequence with blipped CAIPIRINHA and TRAPS including an internal FLASH reference scan for online reconstruction. Whole brain MB-PINS HASTE data were acquired on a Siemens 3T-Prisma system from 10 individuals and compared to a clinical HASTE protocol. ResultsThe proposed MB-PINS HASTE protocol accelerates the acquisition by about a factor 2 compared to the clinical HASTE. The diagnostic image quality proved to be comparable for both sequences for the evaluation of the overall aspect of the brain, the detection of white matter changes and areas of tissue loss, and for the evaluation of the CSF spaces although artifacts were more frequently encountered with MB-PINS HASTE. ConclusionsMB-PINS HASTE enables acquisition of slice accelerated highly T2-weighted images and provides good diagnostic image quality while reducing acquisition time. Copyright © 2017 Elsevier B.V. All rights reserved.

The Effect of Female Quality on Male Ejaculatory Expenditure and Reproductive Success in a Praying Mantid

PubMed Central

Jayaweera, Anuradhi; Barry, Katherine L.

2015-01-01

Strategic ejaculation is a behavioural strategy shown by many animals as a response to sperm competition and/or as a potential mechanism of cryptic male choice. Males invest more mating resources when the risk of sperm competition increases or they invest more in high quality females to maximize their reproductive output. We tested this hypothesis in the false garden mantid Pseudomantis albofimbriata, where females are capable of multiply mating and body condition is an indicator of potential reproductive fitness. We predicted male mantids would ejaculate strategically by allocating more sperm to high quality females. To determine if and how males alter their ejaculate in response to mate quality, we manipulated female food quantity so that females were either in good condition with many eggs (i.e. high quality) or poor condition with few eggs (i.e. low quality). Half of the females from each treatment were used in mating trials in which transferred sperm was counted before fertilisation occurred and the other half of females were used in mating trials where fertilisation occurred and ootheca mass and total eggs in the ootheca were recorded. Opposed to our predictions, the total number of sperm and the proportion of viable sperm transferred did not vary significantly between female treatments. Male reproductive success was entirely dependent on female quality/fecundity, rather than on the number of sperm transferred. These results suggest that female quality is not a major factor influencing postcopulatory male mating strategies in P. albofimbriata, and that sperm number has little effect on male reproductive success in a single mating scenario. PMID:25970459

Developing a Water Quality Index (WQI) for an Irrigation Dam.

PubMed

De La Mora-Orozco, Celia; Flores-Lopez, Hugo; Rubio-Arias, Hector; Chavez-Duran, Alvaro; Ochoa-Rivero, Jesus

2017-04-29

Pollution levels have been increasing in water ecosystems worldwide. A water quality index (WQI) is an available tool to approximate the quality of water and facilitate the work of decision-makers by grouping and analyzing numerous parameters with a single numerical classification system. The objective of this study was to develop a WQI for a dam used for irrigation of about 5000 ha of agricultural land. The dam, La Vega, is located in Teuchitlan, Jalisco, Mexico. Seven sites were selected for water sampling and samples were collected in March, June, July, September, and December 2014 in an initial effort to develop a WQI for the dam. The WQI methodology, which was recommended by the Mexican National Water Commission (CNA), was used. The parameters employed to calculate the WQI were pH, electrical conductivity (EC), dissolved oxygen (DO), total dissolved solids (TDS), total hardness (TH), alkalinity (Alk), total phosphorous (TP), Cl - , NO₃, SO₄, Ca, Mg, K, B, As, Cu, and Zn. No significant differences in WQI values were found among the seven sampling sites along the dam. However, seasonal differences in WQI were noted. In March and June, water quality was categorized as poor. By July and September, water quality was classified as medium to good. Quality then decreased, and by December water quality was classified as medium to poor. In conclusion, water treatment must be applied before waters from La Vega dam reservoir can be used for irrigation or other purposes. It is recommended that the water quality at La Vega dam is continually monitored for several years in order to confirm the findings of this short-term study.

The effects of prospective mate quality on investments in healthy body weight among single women.

PubMed

Harris, Matthew C; Cronin, Christopher J

2017-02-01

This paper examines how a single female's investment in healthy body weight is affected by the quality of single males in her marriage market. A principle concern in estimation is the presence of market-level unobserved heterogeneity that may be correlated with changes in single male quality, measured as earning potential. To address this concern, we employ a differencing strategy that normalizes the exercise behaviors of single women to those of their married counterparts. Our main results suggest that when potential mate quality in a marriage market decreases, single black women invest less in healthy body weight. For example, we find that a 10 percentage point increase in the proportion of low quality single black males leads to a 5-10% decrease in vigorous exercise taken by single black females. Results for single white women are qualitatively similar, but not consistent across specifications. These results highlight the relationship between male and female human capital acquisition that is driven by participation in the marriage market. Our results suggest that programs designed to improve the economic prospects of single males may yield positive externalities in the form of improved health behaviors, such as more exercise, particularly for single black females. Copyright © 2016 Elsevier B.V. All rights reserved.

[Further development and validation of a clinical auditing procedure for rehabilitation facilities].

PubMed

Meixner, K; Lubenow, B; Brückner, U; Gerdes, N

2006-06-01

Visitations (audits) are considered an instrument of external quality assurance by which the structural and organizational set-up of health facilities can be assessed on site by external experts. The Deutsche Rentenversicherung Bund (including the former Bundesversicherungsanstalt für Angestellte, BfA, the statutory pension insurance agency for white collar employees) is the largest body responsible for rehabilitation in Germany, and it regularly carries out visitations in the approximately 650 rehab centres it sends its patients to. The project presented in this article aimed at developing a manual with detailed descriptions of the procedures and criteria of the assessment, as well as at checking the inter-rater-reliability of the assessment. The manual was developed in cooperation with experts of the Deutsche Rentenversicherung Bund. It contains a description of the areas to be assessed during a visitation as well as leading questions and criteria for the evaluation of single features. The manual was examined in "test visitations" in 10 centres, each of which was visited by three visitation teams (1 medical and 1 administrative expert) simultaneously. When the resulting 30 assessments were compared, the criterion "overall quality of the centre" (which was assessed on a 10-point scale) showed precise agreement in 47 %, and a deviation by 1 point in 33 % of the cases. Single features assessed on a three-point scale (no improvement needed/improvement recommended/immediate improvement obligatory) resulted in precise agreement in between 80 % ("medical and therapeutic processes") and 86 % ("structural features") of the cases. Two-point scales (condition fulfilled or not fulfilled) showed an agreement between 89 % ("internal quality management") and 97 % ("single structural features"). In order to maintain and further develop this good inter-rater-reliability, the visitors of Deutsche Rentenversicherung Bund are continually trained in applying the visitation manual. In addition to transferring knowledge, these internal training courses are aimed at exchanging views and experience in order to enhance consensus among the visitors. This approach of Deutsche Rentenversicherung Bund could be regarded as "internal quality assurance" of its visitation procedure.

Rating, ranking, and understanding acoustical quality in university classrooms

NASA Astrophysics Data System (ADS)

Hodgson, Murray

2002-08-01

Nonoptimal classroom acoustical conditions directly affect speech perception and, thus, learning by students. Moreover, they may lead to voice problems for the instructor, who is forced to raise his/her voice when lecturing to compensate for poor acoustical conditions. The project applied previously developed simplified methods to predict speech intelligibility in occupied classrooms from measurements in unoccupied and occupied university classrooms. The methods were used to predict the speech intelligibility at various positions in 279 University of British Columbia (UBC) classrooms, when 70% occupied, and for four instructor voice levels. Classrooms were classified and rank ordered by acoustical quality, as determined by the room-average speech intelligibility. This information was used by UBC to prioritize classrooms for renovation. Here, the statistical results are reported to illustrate the range of acoustical qualities found at a typical university. Moreover, the variations of quality with relevant classroom acoustical parameters were studied to better understand the results. In particular, the factors leading to the best and worst conditions were studied. It was found that 81% of the 279 classrooms have "good," "very good," or "excellent" acoustical quality with a "typical" (average-male) instructor. However, 50 (18%) of the classrooms had "fair" or "poor" quality, and two had "bad" quality, due to high ventilation-noise levels. Most rooms were "very good" or "excellent" at the front, and "good" or "very good" at the back. Speech quality varied strongly with the instructor voice level. In the worst case considered, with a quiet female instructor, most of the classrooms were "bad" or "poor." Quality also varies with occupancy, with decreased occupancy resulting in decreased quality. The research showed that a new classroom acoustical design and renovation should focus on limiting background noise. They should promote high instructor speech levels at the back of the classrooms. This involves, in part, limiting the amount of sound absorption that is introduced into classrooms to control reverberation. Speech quality is not very sensitive to changes in reverberation, so controlling it for its own sake should not be a design priority. copyright 2002 Acoustical Society of America.

Heat transfer and pressure drop of condensation of hydrocarbons in tubes

NASA Astrophysics Data System (ADS)

Fries, Simon; Skusa, Severin; Luke, Andrea

2018-03-01

The heat transfer coefficient and pressure drop are investigated for propane. Two different mild steel plain tubes and saturation pressures are considered for varying mass flux and vapour quality. The pressure drop is compared to the Friedel-Correlation with two different approaches to determine the friction factor. The first is calculation as proposed by Friedel and the second is through single phase pressure drop investigations. For lower vapour qualities the experimental results are in better agreement with the approach of the calculated friction factor. For higher vapour qualities the experimental friction factor is more precise. The pressure drop increases for a decreasing tube diameter and saturation pressure. The circumferential temperature profile and heat transfer coefficients are shown for a constant vapour quality at varying mass fluxes. The subcooling is highest for the bottom of the tube and lowest for the top. The average subcooling as well as the circumferential deviation decreases for rising mass fluxes. The averaged heat transfer coefficients are compared to the model proposed by Thome and Cavallini. The experimental results are in good agreement with both correlations, however the trend is better described with the correlation from Thome. The experimental heat transfer coefficients are under predicted by Thome and over predicted by Cavallini.

The Association between Parent Diet Quality and Child Dietary Patterns in Nine- to Eleven-Year-Old Children from Dunedin, New Zealand

PubMed Central

Davison, Brittany; Saeedi, Pouya; Black, Katherine; Harrex, Harriet; Haszard, Jillian; Meredith-Jones, Kim; Quigg, Robin; Skeaff, Sheila; Stoner, Lee; Wong, Jyh Eiin; Skidmore, Paula

2017-01-01

Previous research investigating the relationship between parents’ and children’s diets has focused on single foods or nutrients, and not on global diet, which may be more important for good health. The aim of the study was to investigate the relationship between parental diet quality and child dietary patterns. A cross-sectional survey was conducted in 17 primary schools in Dunedin, New Zealand. Information on food consumption and related factors in children and their primary caregiver/parent were collected. Principal component analysis (PCA) was used to investigate dietary patterns in children and diet quality index (DQI) scores were calculated in parents. Relationships between parental DQI and child dietary patterns were examined in 401 child-parent pairs using mixed regression models. PCA generated two patterns; ‘Fruit and Vegetables’ and ‘Snacks’. A one unit higher parental DQI score was associated with a 0.03SD (CI: 0.02, 0.04) lower child ‘Snacks’ score. There was no significant relationship between ‘Fruit and Vegetables’ score and parental diet quality. Higher parental diet quality was associated with a lower dietary pattern score in children that was characterised by a lower consumption frequency of confectionery, chocolate, cakes, biscuits and savoury snacks. These results highlight the importance of parental modelling, in terms of their dietary choices, on the diet of children. PMID:28492490

The Association between Parent Diet Quality and Child Dietary Patterns in Nine- to Eleven-Year-Old Children from Dunedin, New Zealand.

PubMed

Davison, Brittany; Saeedi, Pouya; Black, Katherine; Harrex, Harriet; Haszard, Jillian; Meredith-Jones, Kim; Quigg, Robin; Skeaff, Sheila; Stoner, Lee; Wong, Jyh Eiin; Skidmore, Paula

2017-05-11

Previous research investigating the relationship between parents' and children's diets has focused on single foods or nutrients, and not on global diet, which may be more important for good health. The aim of the study was to investigate the relationship between parental diet quality and child dietary patterns. A cross-sectional survey was conducted in 17 primary schools in Dunedin, New Zealand. Information on food consumption and related factors in children and their primary caregiver/parent were collected. Principal component analysis (PCA) was used to investigate dietary patterns in children and diet quality index (DQI) scores were calculated in parents. Relationships between parental DQI and child dietary patterns were examined in 401 child-parent pairs using mixed regression models. PCA generated two patterns; 'Fruit and Vegetables' and 'Snacks'. A one unit higher parental DQI score was associated with a 0.03SD (CI: 0.02, 0.04) lower child 'Snacks' score. There was no significant relationship between 'Fruit and Vegetables' score and parental diet quality. Higher parental diet quality was associated with a lower dietary pattern score in children that was characterised by a lower consumption frequency of confectionery, chocolate, cakes, biscuits and savoury snacks. These results highlight the importance of parental modelling, in terms of their dietary choices, on the diet of children.

Patient safety reporting systems: sustained quality improvement using a multidisciplinary team and "good catch" awards.

PubMed

Herzer, Kurt R; Mirrer, Meredith; Xie, Yanjun; Steppan, Jochen; Li, Matthew; Jung, Clinton; Cover, Renee; Doyle, Peter A; Mark, Lynette J

2012-08-01

Since 1999, hospitals have made substantial commitments to health care quality and patient safety through individual initiatives of executive leadership involvement in quality, investments in safety culture, education and training for medical students and residents in quality and safety, the creation of patient safety committees, and implementation of patient safety reporting systems. At the Weinberg Surgical Suite at The Johns Hopkins Hospital (Baltimore), a 16-operating-room inpatient/outpatient cancer center, a patient safety reporting process was developed to maximize the usefulness of the reports and the long-term sustainability of quality improvements arising from them. A six-phase framework was created incorporating UHC's Patient Safety Net (PSN): Identify, report, analyze, mitigate, reward, and follow up. Unique features of this process included a multidisciplinary team to review reports, mitigate hazards, educate and empower providers, recognize the identifying/reporting individuals or groups with "Good Catch" awards, and follow up to determine if quality improvements were sustained over time. Good Catch awards have been given in recognition of 29 patient safety hazards identified since 2008; in each of these cases, an initiative was developed to mitigate the original hazard. Twenty-five (86%) of the associated quality improvements have been sustained. Two Good Catch award-winning projects--vials of heparin with an unusually high concentration of the drug that posed a potential overdose hazard and a rapid infusion device that resisted practitioner control--are described in detail. A multidisciplinary team's analysis and mitigation of hazards identified in a patient safety reporting process entailed positive recognition with a Good Catch award, education of practitioners, and long-term follow-up.

Evaluation of demineralized bone and bone transplants in vitro and in vivo with cone beam computed tomography imaging.

PubMed

Draenert, F G; Gebhart, F; Berthold, M; Gosau, M; Wagner, W

2010-07-01

The objective of this study was to determine the ability of two flat panel cone beam CT (CBCT) devices to identify demineralized bone and bone transplants in vivo and in vitro. Datasets from patients with autologous bone grafts (n = 9, KaVo 3DeXam (KaVo, Biberach, Germany); n = 38, Accuitomo 40 (Morita, Osaka, Japan)) were retrospectively evaluated. Demineralized and non-demineralized porcine cancellous bone blocks were examined with the two CBCT devices. A SawBone skull (Pacific Research Laboratories, Vashon, WA) was used as a positioning tool for the bone blocks. Descriptive evaluation and image quality assessment were conducted on the KaVo 3DeXam data (voxel size 0.3 mm) using the OsiriX viewer as well as on the Morita Accuitomo data (voxel size 0.25 mm) using proprietary viewer software. Both in vivo and in vitro, the descriptive analysis of the images of the two devices showed well-visualized bone transplants with clearly defined cancellous bones and well-defined single bone trabeculae in all cross-sections. In vitro, demineralized samples showed lower radiographic opacity but no significant loss of quality compared with fresh bone (P = 0.070). Single cancellous bone trabeculae were significantly better visualized with the Morita 3D Accuitomo device than with the KaVo 3DeXam device (P = 0.038). Both the KaVo 3DeXam and Morita 3D Accuitomo devices produce good-quality images of cancellous bones in in vivo remodelling as well as after in vitro demineralization.

Procedure for maximizing oocyte harvest for in vitro embryo production in small ruminants.

PubMed

Gibbons, A; Pereyra Bonnet, F; Cueto, M I; Catala, M; Salamone, D F; Gonzalez-Bulnes, A

2007-08-01

Possible effects of repeated hormonal treatments and laparoscopic ovum pick-up (LOPU) on the efficiency of oocyte recovery rate and quality were determined in sheep and goats. In six adult Merino sheep and five Criolla goats, ovarian status was synchronized by a prostaglandin F(2 alpha) analogue and the insertion of an intravaginal sponge 48 h later. Follicle development was stimulated by a single dose of FSH (60 mg NIH-FSH-P1) plus a single dose of equine chorionic gonadotrophin (eCG; 300 UI). The first FSH/eCG doses were administered 48 h after the sponge insertion, being repeated every 4 days to complete a total of four treatments in sheep and three in goats. Follicles in both ovaries were categorized according to their diameter and follicular fluid was aspirated under laparoscopic observation without a vacuum pump. In sheep, during a 12-day-period, a total of 347 follicles were aspirated with a recovery rate of 46.9%. In goats, during an 8-day-period, 219 follicles were aspirated with a recovery rate of 45.6%. In both species, there were no significant differences in the number of aspirated follicles, oocyte recovery rate and good quality oocyte recovery rate. However, in sheep the oocyte recovery rate was higher for large follicles, whereas in goats no such effect was detected. In summary, current results indicate that retrieval of oocytes can be maximized, without affecting oocyte quality, by repeating 'oneshot' FSH/eCG regimes and LOPUs at intervals as short as 4 days.

Perceived Sleep Quality, Mood States, and Their Relationship With Performance Among Brazilian Elite Athletes During a Competitive Period.

PubMed

Brandt, Ricardo; Bevilacqua, Guilherme G; Andrade, Alexandro

2017-04-01

Brandt, R, Bevilacqua, GG, and Andrade, A. Perceived sleep quality, mood states, and their relationship with performance among Brazilian elite athletes during a competitive period. J Strength Cond Res 31(4): 1033-1039, 2017-We described the perceived sleep quality and mood states of elite athletes during a competitive period, and clarified their relationship to athletes' sport performance. Participants were 576 Brazilian elite athletes (404 men and 172 women) of individual and team sports. Mood states were evaluated using the Brunel Mood Scale, whereas perceived sleep quality was evaluated using a single question ("How would you evaluate the quality of your sleep in the last few days?"). Evaluations of mood state and sleep quality were performed up to 60 minutes before national and international sports competitions began. Descriptive and inferential statistics (including logistic regression) were used to evaluate the relationship of sleep quality and mood states with performance (i.e., winning or losing). Athletes typically had good sleep quality and mood states similar to the Iceberg profile (i.e., high vigor and low tension, depression, anger, fatigue, and mental confusion). The Wald test revealed that sleep, anger, tension, and vigor predicted athletes' performance. Specifically, poor sleep quality and low vigor and anger decreased the odds of winning, whereas higher tension increased these odds. The Hosmer-Lemeshow test indicated that the results were sufficiently generalizable. Overall, we observed a significant relationship between sleep and mood states, which in turn both significantly influenced athletes' sports performance. Thus, coaching staff and athletes should monitor athletes' sleep quality before competitions to ensure athletes are in the optimal condition for performance.

Examining the accessibility of high-quality physical activity behaviour change support freely available online for men with prostate cancer.

PubMed

Short, Camille E; Gelder, Charlotte; Binnewerg, Lena; McIntosh, Megan; Turnbull, Deborah

2018-02-01

While the internet is considered a promising avenue for providing physical activity support to prostate cancer survivors, little is known about the accessibility of quality websites in the real world. This work aimed to explore what websites prostate cancer survivors are likely to find when seeking physical activity support online and to evaluate their quality using evidenced-based criteria. A search strategy was developed in consultation with prostate cancer survivors (n = 44) to reflect the most common ways they are likely to search the internet. The search was then conducted by a single reviewer, and identified websites were assessed for quality by two reviewers using an evidence-based quality assessment tool developed for this study. Discrepancies were resolved by a third reviewer. Of the 45 identified websites, 13 (29%) received a high quality rating, 22 (49%) received a moderate rating and 10 (22%) received a low quality rating. Higher-quality websites tended to have a .org or .gov domain and tended to be located using searches specific to prostate cancer or prostate cancer and exercise. Very few websites contained complete information regarding the physical activity guidelines for cancer survivors, and no websites provided comprehensive behaviour change support. There are some good-quality physical activity websites accessible to men with prostate cancer. However, they may be difficult to find and/or require updating to include complete recommendations and more behaviour change support. Efforts to improve physical activity information online and strategies to direct prostate cancer survivors to higher-quality websites and support services are needed to ensure safety and efficacy.

WHO Expert Committee on specifications for pharmaceutical preparations.

PubMed

2010-01-01

The Expert Committee on Specifications for Pharmaceutical Preparations works towards clear, independent and practical standards and guidelines for the quality assurance of medicines. Standards are developed by the Committee through worldwide consultation and an international consensus-building process. The following new guidelines were adopted and recommended for use: good practices for pharmaceutical quality control laboratories; supplementary guidelines for active pharmaceutical ingredients; good manufacturing practices for pharmaceutical products containing hazardous substances; good manufacturing practices for sterile pharmaceutical products; good distribution practices for pharmaceutical products; guidelines on the requalification of prequalified dossiers: and guidelines for the preparation of a contract research organization master file.

Is finding something good in the bad always good? Benefit finding among women with breast cancer.

PubMed

Tomich, Patricia L; Helgeson, Vicki S

2004-01-01

The correlates and consequences of benefit finding on quality of life were examined for 364 women (93% Caucasian, 6% African American, and 1% Hispanic) diagnosed with Stage I, II, and III breast cancer. Benefit finding and quality of life were measured 4 months postdiagnosis (Tl), 3 months after Tl (T2), and 6 months after T2 (T3). Women with lower socioeconomic status, minorities, and those with more severe disease perceived more benefits at baseline. Benefit finding was associated with more negative affect at baseline and also interacted with stage of disease, such that negative relations to quality of life across time were limited to those with more severe disease. Findings suggest there are qualifiers as to whether "finding something good in the bad" is good or bad. (c) 2004 APA, all rights reserved

Fast and robust wavelet-based dynamic range compression and contrast enhancement model with color restoration

NASA Astrophysics Data System (ADS)

Unaldi, Numan; Asari, Vijayan K.; Rahman, Zia-ur

2009-05-01

Recently we proposed a wavelet-based dynamic range compression algorithm to improve the visual quality of digital images captured from high dynamic range scenes with non-uniform lighting conditions. The fast image enhancement algorithm that provides dynamic range compression, while preserving the local contrast and tonal rendition, is also a good candidate for real time video processing applications. Although the colors of the enhanced images produced by the proposed algorithm are consistent with the colors of the original image, the proposed algorithm fails to produce color constant results for some "pathological" scenes that have very strong spectral characteristics in a single band. The linear color restoration process is the main reason for this drawback. Hence, a different approach is required for the final color restoration process. In this paper the latest version of the proposed algorithm, which deals with this issue is presented. The results obtained by applying the algorithm to numerous natural images show strong robustness and high image quality.

The commensurability of environmental geology and petroleum geology

DOE Office of Scientific and Technical Information (OSTI.GOV)

Argen, R.J.

1990-05-01

Environmental geology and petroleum geology are practical applications of pure geology. These two applied sciences differ with respect to their philosophical and ethical mandates. A good petroleum geologist finds hydrocarbons, but the role of a good environmental geologist is not well defined. If the good environmental geologist's role is not simply to protect the environment from the good petroleum geologist then how do the mandates of these geologists differ, yet remain compatible If the mandate of a good environmental geologist were to protect every natural resource from all managed use, then the good environmental geologist and the good petroleum geologistmore » would forever be at war. This mandate provides no framework for agreement because it assumes the inherent worth of each natural resource is discoverable. If the mandate of a good environmental geologist is to discover how to maximize the long-term benefits of the managed use of natural resource, then both the good environmental geologist and the good petroleum geologist would agree that no natural resource has inherent worth. The value of a natural resource is not determined by what it is, but by how it enhances the quality of life for a particular class of sentient creatures. An instrumental theory of value will provide a medium for interim disagreement on how to enhance the quality of life for sentient creatures, and also will provide the means for a long-term agreement that the managed use of natural resources enhances the long-term quality of life for sentient creatures.« less

Building Character through Literacy with Children's Literature

ERIC Educational Resources Information Center

Almerico, Gina M.

2014-01-01

Character education is described as curriculum specifically developed to teach children about the quality and traits of good character. One means in which children can learn about good character is through the pages of high quality children's literature. In this study, the author defines the characteristics of an effective character development…

Towards Quality Governance and Management of West African Universities: The Way Forward

ERIC Educational Resources Information Center

Etejere, Patricia Agnes Ovigueraye; Aburime, Aminat Ozohu; Aliyu, Olumayowa Kabir; Jekayinfa, Oyeyemi Jumoke

2017-01-01

Internal governance in West African universities is faced with considerable government participation in the performance of their traditional functions. External governing relationship is a function of government policies of the institutions and their commitments to stakeholders. The pressure to "deliver the goods" in good quality as well…

To Group or Not to Group? Good Practice for Housing Male Laboratory Mice

PubMed Central

Kappel, Sarah; Hawkins, Penny; Mendl, Michael T.

2017-01-01

Simple Summary Wild mice live in territories inhabited by one adult male, several females, and their offspring. This cannot be replicated in the laboratory, so male mice are usually housed in single-sex groups or individually. However, there can be serious animal welfare problems associated with both these approaches, such as lack of social contact when housed individually or aggression between males when kept in groups. Group housing is widely recommended to give male laboratory mice the opportunity to behave as ‘social animals’, but social stress can be detrimental to the welfare of these animals, even without injurious fighting. All of this can also affect the quality of the science, giving rise to ethical concerns. This review discusses whether it is in the best welfare interests of male mice to be housed in groups, or alone. We conclude that it is not possible to give general recommendations for good practice for housing male laboratory mice, as responses to single- and group-housing can be highly context-dependent. The welfare implications of housing protocols should be researched and considered in each case. Abstract It is widely recommended to group-house male laboratory mice because they are ‘social animals’, but male mice do not naturally share territories and aggression can be a serious welfare problem. Even without aggression, not all animals within a group will be in a state of positive welfare. Rather, many male mice may be negatively affected by the stress of repeated social defeat and subordination, raising concerns about welfare and also research validity. However, individual housing may not be an appropriate solution, given the welfare implications associated with no social contact. An essential question is whether it is in the best welfare interests of male mice to be group- or singly housed. This review explores the likely impacts—positive and negative—of both housing conditions, presents results of a survey of current practice and awareness of mouse behavior, and includes recommendations for good practice and future research. We conclude that whether group- or single-housing is better (or less worse) in any situation is highly context-dependent according to several factors including strain, age, social position, life experiences, and housing and husbandry protocols. It is important to recognise this and evaluate what is preferable from animal welfare and ethical perspectives in each case. PMID:29186765

WHO Expert Committee on Specifications for Pharmaceutical Preparations.

PubMed

2011-01-01

The Expert Committee on Specifications for Pharmaceutical Preparations works towards clear, independent and practical standards and guidelines for the quality assurance of medicines. Standards are developed by the Committee through worldwide consultation and an international consensus-building process. The following new guidelines were adopted and recommended for use: procedure for adoption of International Chemical Reference Substances; WHO good practices for pharmaceutical microbiology laboratories; good manufacturing practices: main principles for pharmaceutical products; good manufacturing practices for blood establishments (jointly with the Expert Committee on Biological Standardization); guidelines on good manufacturing practices for heating, ventilation and air-conditioning systems for non-sterile pharmaceutical dosage forms; good manufacturing practices for sterile pharmaceutical products; guidelines on transfer of technology in pharmaceutical manufacturing; good pharmacy practice: standards for quality of pharmacy services (joint FIP/WHO); model guidance for the storage and transport of time- and temperature-sensitive pharmaceutical products (jointly with the Expert Committee on Biological Standardization); procedure for prequalification of pharmaceutical products; guide on submission of documentation for prequalification of innovator finished pharmaceutical products approved by stringent regulatory authorities; prequalification of quality control laboratories: procedure for assessing the acceptability, in principle, of quality control laboratories for use by United Nations agencies; guidelines for preparing a laboratory information file; guidelines for drafting a site master file; guidelines on submission of documentation for a multisource (generic) finished product: general format: preparation of product dossiers in common technical document format.

High-quality digital color xerography

NASA Astrophysics Data System (ADS)

Takiguchi, Koichi

1993-06-01

Image noise, tone reproduction, color reproduction, fine line reproduction, and OHP performance are the most important characteristics for a high quality color copier. Technologies enabling such quality are use of fine toner, halftone algorithm to ensure good highlight reproduction, soft roll fuser with good release performance, smooth surface and high thermal conductivity, white and smooth paper, and selection of a coating material for the surface layer of the OHP sheets. These technologies are integrated in the Fuji Xerox `A- Color' product. Utilizing 7 micrometers color toner, `A-Color' can make very high quality color copies.

Current good manufacturing practices, quality control procedures, quality factors, notification requirements, and records and reports, for infant formula. Final rule.

PubMed

2014-06-10

The Food and Drug Administration (FDA or we) is issuing a final rule that adopts, with some modifications, the interim final rule (IFR) entitled "Current Good Manufacturing Practices, Quality Control Procedures, Quality Factors, Notification Requirements, and Records and Reports, for Infant Formula'' (February 10, 2014). This final rule affirms the IFR's changes to FDA's regulations and provides additional modifications and clarifications. The final rule also responds to certain comments submitted in response to the request for comments in the IFR.

The Parent Perspective: “Being a Good Parent” When Making Critical Decisions in the PICU

PubMed Central

October, Tessie W.; Fisher, Kiondra R.; Feudtner, Chris; Hinds, Pamela S.

2015-01-01

Objective To identify factors important to parents making decisions for their critically ill child. Design Prospective cross-sectional study. Setting Single center, tertiary care PICU. Subjects Parents making critical treatment decisions for their child. Intervention One-on-one interviews that used the Good Parent Tool-2 open-ended question that asks parents to describe factors important for parenting their ill child and how clinicians could help them achieve their definition of “being a good parent” to their child. Parent responses were analyzed thematically. Parents also ranked themes in order of importance to them using the Good Parent Ranking Exercise. Measurement and Main Results Of 53 eligible parents, 43 (81%) participated. We identified nine themes through content analysis of the parent’s narrative statements from the Good Parent Tool. Most commonly (60% of quotes) components of being a good parent described by parents included focusing on their child’s quality of life, advocating for their child with the medical team, and putting their child’s needs above their own. Themes key to parental decision making were similar regardless of parent race and socioeconomic status or child’s clinical status. We identified nine clinician strategies identified by parents as helping them fulfill their parenting role, most commonly, parents wanted to be kept informed (32% of quotes). Using the Good Parent Ranking Exercise, fathers ranked making informed medical decisions as most important, whereas mothers ranked focusing on the child’s health and putting their child’s needs above their own as most important. However, mothers who were not part of a couple ranked making informed medical decisions as most important. Conclusion These findings suggest a range of themes important for parents to “be a good parent” to their child while making critical decisions. Further studies need to explore whether clinician’s knowledge of the parent’s most valued factor can improve family-centered care. PMID:24583502

Single dose oral analgesics for acute postoperative pain in adults - an overview of Cochrane reviews.

PubMed

Moore, R Andrew; Derry, Sheena; Aldington, Dominic; Wiffen, Philip J

2015-09-28

This is an updated version of the original Cochrane overview published in Issue 9, 2011. That overview considered both efficacy and adverse events, but adverse events are now dealt with in a separate overview.Thirty-nine Cochrane reviews of randomised trials have examined the analgesic efficacy of individual drug interventions in acute postoperative pain. This overview brings together the results of those individual reviews and assesses the reliability of available data. To summarise the efficacy of pharmaceutical interventions for acute pain in adults with at least moderate pain following surgery who have been given a single dose of oral analgesic. We identified systematic reviews in the Cochrane Database of Systematic Reviews in The Cochrane Library through a simple search strategy. All reviews were overseen by a single review group, had a standard title, and had as their primary outcome the number of participants with at least 50% pain relief over four to six hours compared with placebo. For individual reviews, we extracted the number needed to treat for an additional beneficial outcome (NNT) for this outcome for each drug/dose combination, and also the percentage of participants achieving at least 50% maximum pain relief, the mean of mean or median time to remedication, and the percentage of participants remedicating by six, eight, 12, or 24 hours. Where there was adequate information for pairs of drug and dose (at least 200 participants, in at least two studies), we defined the addition of four comparisons of typical size (400 participants in total) with zero effect as making the result potentially subject to publication bias and therefore unreliable. The overview included 39 separate Cochrane Reviews with 41 analyses of single dose oral analgesics tested in acute postoperative pain models, with results from about 50,000 participants in approximately 460 individual studies. The individual reviews included only high-quality trials of standardised design, methods, and efficacy outcome reporting. No statistical comparison was undertaken.Reliable results (high quality information) were obtained for 53 pairs of drug and dose in painful postsurgical conditions; these included various fixed dose combinations, and fast acting formulations of some analgesics. NNTs varied from about 1.5 to 20 for at least 50% maximum pain relief over four to six hours compared with placebo. The proportion of participants achieving this level of benefit varied from about 30% to over 70%, and the time to remedication varied from two hours (placebo) to over 20 hours. Good (low) NNTs were obtained with ibuprofen 200 mg plus paracetamol (acetaminophen) 500 mg (NNT compared with placebo 1.6; 95% confidence interval 1.5 to 1.8), ibuprofen fast acting 200 mg (2.1; 1.9 to 2.3); ibuprofen 200 mg plus caffeine 100 mg (2.1; 1.9 to 3.1), diclofenac potassium 50 mg (2.1; 1.9 to 2.5), and etoricoxib 120 mg (1.8; 1.7 to 2.0). For comparison, ibuprofen acid 400 mg had an NNT of 2.5 (2.4 to 2.6). Not all participants had good pain relief and, for many pairs of drug and dose, 50% or more did not achieve at least 50% maximum pain relief over four to six hours.Long duration of action (eight hours or greater) was found for etoricoxib 120 mg, diflunisal 500 mg, paracetamol 650 mg plus oxycodone 10 mg, naproxen 500/550 mg, celecoxib 400 mg, and ibuprofen 400 mg plus paracetamol 1000 mg.There was no evidence of analgesic effect for aceclofenac 150 mg, aspirin 500 mg, and oxycodone 5 mg (low quality evidence). No trial data were available in reviews of acemetacin, meloxicam, nabumetone, nefopam, sulindac, tenoxicam, and tiaprofenic acid. Inadequate amounts of data were available for nine drugs and doses, and data potentially susceptible to publication bias for 13 drugs and doses (very low quality evidence). There is a wealth of reliable evidence on the analgesic efficacy of single dose oral analgesics. Fast acting formulations and fixed dose combinations of analgesics can produce good and often long-lasting analgesia at relatively low doses. There is also important information on drugs for which there are no data, inadequate data, or where results are unreliable due to susceptibility to publication bias. This should inform choices by professionals and consumers.

Cost-effective treatment solutions for rural areas: design and operation of a new package treatment plant for single households.

PubMed

Daude, D; Stephenson, T

2003-01-01

The design approach and operation of a newly developed package plant treating domestic sewage from single households were evaluated. Combining submerged aerated filter (SAF) technology with jet aeration and incorporating both into a compact and shallow tank resulted in a cost-effective treatment solution. A trial unit was permanently installed at a rural site, serving a single household. Jet aeration proved to be the best aeration method for the shallow bioreactor design. Further trials revealed a 50% reduction in suspended solids (SS) through the use of a static effluent filter and found that annual plant maintenance was vital to sustain stable operating conditions. Despite high variations in influent conditions, the trial unit produced good effluent quality during steady-state operation. Average effluent BOD5, COD and SS values were 19.6 mg l(-1), 98 mg l(-1) and 32 mg l(-1) achieving overall removal efficiencies of 94.2%, 85.9% and 87.6% respectively. However, effluent ammonia nitrogen (NH4-N) levels were found to be inconsistent varying from 9 mg l(-1) to over 60 mg l(-1).

Cancer patient autonomy and quality of dying-a prospective nationwide survey in Taiwan.

PubMed

Cheng, Shao-Yi; Lin, Wen-Yuan; Cheng, Ya-Hui; Huang, Chien Hsiun; Chen, Ching-Yu; Hwang, Shinn-Jang; Tsai, Shih-Tzu; Chiu, Tai-Yuan

2016-02-01

Patient autonomy is an essential factor in the measurement of quality of dying. We aimed to conduct a study to investigate the factors affecting the autonomy of advanced cancer patients in Taiwan. We conducted a prospective, multicenter study and recruited 574 advanced cancer patients from four inpatient hospice wards in Taiwan; their quality of dying was measured using the validated good death scale and the audit scale. Physician-assessed autonomy and the other scales were measured in a team conference by the primary care physician and the team 1 week after the patient had passed away. The good death scale was measured twice, once at admission and then after the patient had passed away for comparison. We measured factors affecting the improvement in quality of dying of these patients initially by applying multiple linear regression analysis. Then, taking physician-assessed autonomy as a dependent variable, we identified the factors that affected this variable. The good death score at admission, clear consciousness, number of admission days beyond 7, better physical care, higher physician-assessed autonomy, better emotional support, better communication, better continuity of life, and physician-reported rate of closure were factors affecting the quality of dying. Further analysis identified age (p = 0.031), consciousness (p = 0.01), and total good death scale score at death (p < 0.001) as determinants of physician-assessed autonomy. We concluded that physician-assessed autonomy would affect a good death and was highly correlated with age, consciousness level, and quality of dying at the end for advanced cancer patients in Taiwan. Copyright © 2015 John Wiley & Sons, Ltd.

Low-energy electron-impact single ionization of helium

DOE Office of Scientific and Technical Information (OSTI.GOV)

Colgan, J.; Pindzola, M. S.; Childers, G.

2006-04-15

A study is made of low-energy electron-impact single ionization of ground-state helium. The time-dependent close-coupling method is used to calculate total integral, single differential, double differential, and triple differential ionization cross sections for impact electron energies ranging from 32 to 45 eV. For all quantities, the calculated cross sections are found to be in very good agreement with experiment, and for the triple differential cross sections, good agreement is also found with calculations made using the convergent close-coupling technique.

Patient-Reported Outcomes, Quality of Life, and Satisfaction Rates in Young Patients Aged 50 Years or Younger After Total Knee Arthroplasty.

PubMed

Goh, Graham Seow-Hng; Liow, Ming Han Lincoln; Bin Abd Razak, Hamid Rahmatullah; Tay, Darren Keng-Jin; Lo, Ngai-Nung; Yeo, Seng-Jin

2017-02-01

Recent studies have shown a discrepancy between traditional functional outcomes and patient satisfaction, with some reporting less than 85% satisfaction in older patients undergoing total knee arthroplasty (TKA). As native knee biomechanics are not completely replicated, the resulting functional limitations may cause dissatisfaction in higher-demand individuals. Few studies have recorded patient-reported outcomes, health-related quality of life scores, and patient satisfaction in a young population undergoing TKA. One hundred thirty-six primary TKAs were performed in 114 patients aged 50 years or younger (mean age, 47.0 years; range, 30-50 years) at a single institution. The main diagnoses were osteoarthritis (85%) and rheumatoid arthritis (10%). The range of motion, Knee Society Score, Oxford Knee Score, and Physical and Mental Component Scores of Short Form-36 increased significantly (P < .001). At 2 years, 85.3% of patients had good/excellent knee scores, 71.3% had good/excellent function scores, 94.9% met the minimal clinically important difference for the Oxford Knee Score, and 84.6% met the minimal clinically important difference for the Physical Component Score. We found that 88.8% of patients were satisfied with their surgeries, whereas 86.8% had their expectations fulfilled. Survivorship using revision as an end point was 97.8% at a mean of 7 years (range, 3-16 years). Patients aged 50 years or younger undergoing TKA can experience significant improvements in their quality of life, have their expectations met, and be satisfied with their surgeries, at rates similar to those of non-age-restricted populations. Surgeons should inform them of these benefits and the potential risk of revision surgery in the future, albeit increasingly shown to be low. Copyright © 2016 Elsevier Inc. All rights reserved.

The EVIDENT diet quality index is associated with cardiovascular risk and arterial stiffness in adults.

PubMed

Rodríguez-Martin, Carmela; Alonso-Domínguez, Rosario; Patino-Alonso, María C; Gómez-Marcos, Manuel A; Maderuelo-Fernández, José A; Martin-Cantera, Carlos; García-Ortiz, Luis; Recio-Rodríguez, José I

2017-04-08

We aimed to simplify information from food frequency questionnaires (FFQs) in a single parameter that allows for rapid identification of quality of patient diet and its relationship to cardiovascular risk and pulse wave velocity (PWV). The sample from the EVIDENT study, consisting of 1553 subjects (aged 20-80 years) with no cardiovascular disease selected by random sampling among those attending primary care clinics, was used. The EVIDENT diet index (range 0-100) was calculated based on the results of a FFQ. Evaluation of dietary habits also included adherence to the Mediterranean diet (MD). Cardiovascular risk was estimated, and carotid-femoral pulse wave velocity was measured. Mean subject age was 54.9 ± 13.8 years, and 60.3% of subjects were female. The mean value of the EVIDENT diet index was 52.1 ± 3.2 points. Subjects in the third tertile (the highest score) had the greatest adherence to MD and the highest energy intake, with greater amounts of carbohydrates, protein, and fiber. The best cut-off point of the EVIDENT diet index for predicting good adherence to the MD is 52.3 (0.71 sensitivity, 0.61 specificity). In a multiple regression analysis, after a complete adjustment, it was estimated that for each one-point increase in the EVIDENT diet index, cardiovascular risk (CVR), blood-pressure, waist circumference, and PWV decreased by 0.14, 0.43, 0.24, and 0.09 respectively (p < 0.05, all). The diet quality index developed is associated to CVR and its components, and also with arterial stiffness, as measured with PWV. This index is also a good predictor of adherence to MD.

Good validity of the international spinal cord injury quality of life basic data set.

PubMed

Post, M W M; Adriaansen, J J E; Charlifue, S; Biering-Sørensen, F; van Asbeck, F W A

2016-04-01

Cross-sectional validation study. To examine the construct and concurrent validity of the International Spinal Cord Injury (SCI) Quality of Life (QoL) Basic Data Set. Dutch community. People 28-65 years of age, who obtained their SCI between 18 and 35 years of age, were at least 10 years post SCI and were wheelchair users in daily life. MEASURE(S): The International SCI QoL Basic Data Set consists of three single items on satisfaction with life as a whole, physical health and psychological health (0=complete dissatisfaction; 10=complete satisfaction). Reference measures were the Mental Health Inventory-5 and three items of the World Health Organization Quality of Life measure. Data of 261 participants were available. Mean time after SCI was 24.1 years (s.d. 9.1); 90.4% had a traumatic SCI, 81.5% a motor complete SCI and 40% had tetraplegia. Mean age was 47.9 years (s.d. 8.8) and 73.2% were male. Mean scores were 6.9 (s.d. 1.9) for general QoL, 5.8 (s.d. 2.2) for physical health and 7.1 (s.d. 1.9) for psychological health. No floor or ceiling effects were found. Strong inter-correlations (0.48-0.71) were found between the items, and Cronbach's alpha of the scale was good (0.81). Correlations with the reference measures showed the strongest correlations between the WHOQOL general satisfaction item and general QoL (0.64), the WHOQOL health and daily activities items and physical health (0.69 and 0.60) and the Mental Health Inventory-5 and psychological health (0.70). This first validity study of the International SCI QoL Basic Data Set shows that it appears valid for persons with SCI.

Quality and Dose Optimized CT Trauma Protocol - Recommendation from a University Level-I Trauma Center.

PubMed

Kahn, Johannes; Kaul, David; Böning, Georg; Rotzinger, Roman; Freyhardt, Patrick; Schwabe, Philipp; Maurer, Martin H; Renz, Diane Miriam; Streitparth, Florian

2017-09-01

Purpose  As a supra-regional level-I trauma center, we evaluated computed tomography (CT) acquisitions of polytraumatized patients for quality and dose optimization purposes. Adapted statistical iterative reconstruction [(AS)IR] levels, tube voltage reduction as well as a split-bolus contrast agent (CA) protocol were applied. Materials and Methods  61 patients were split into 3 different groups that differed with respect to tube voltage (120 - 140 kVp) and level of applied ASIR reconstruction (ASIR 20 - 50 %). The CT protocol included a native acquisition of the head followed by a single contrast-enhanced acquisition of the whole body (64-MSCT). CA (350 mg/ml iodine) was administered as a split bolus injection of 100 ml (2 ml/s), 20 ml NaCl (1 ml/s), 60 ml (4 ml/s), 40 ml NaCl (4 ml/s) with a scan delay of 85 s to detect injuries of both the arterial system and parenchymal organs in a single acquisition. Both the quantitative (SNR/CNR) and qualitative (5-point Likert scale) image quality was evaluated in parenchymal organs that are often injured in trauma patients. Radiation exposure was assessed. Results  The use of IR combined with a reduction of tube voltage resulted in good qualitative and quantitative image quality and a significant reduction in radiation exposure of more than 40 % (DLP 1087 vs. 647 mGyxcm). Image quality could be improved due to a dedicated protocol that included different levels of IR adapted to different slice thicknesses, kernels and the examined area for the evaluation of head, lung, body and bone injury patterns. In synopsis of our results, we recommend the implementation of a polytrauma protocol with a tube voltage of 120 kVp and the following IR levels: cCT 5mm: ASIR 20; cCT 0.625 mm: ASIR 40; lung 2.5 mm: ASIR 30, body 5 mm: ASIR 40; body 1.25 mm: ASIR 50; body 0.625 mm: ASIR 0. Conclusion  A dedicated adaptation of the CT trauma protocol (level of reduction of tube voltage and of IR) according to the examined body region (head, lung, body, bone) combined with a split bolus CA injection protocol allows for a high-quality CT examination and a relevant reduction of radiation exposure in the examination of polytraumatized patients Key Points   · Dedicated adaption of the CT trauma protocol allows for an optimized examination.. · Different levels of iterative reconstruction, tube voltage and the CA injection protocol are crucial.. · A reduction of radiation exposure of more than 40 % with good image quality is possible.. Citation Format · Kahn J, Kaul D, Böning G et al. Quality and Dose Optimized CT Trauma Protocol - Recommendation from a University Level-I Trauma Center. Fortschr Röntgenstr 2017; 189: 844 - 854. © Georg Thieme Verlag KG Stuttgart · New York.

[The truth is in the eye of the beholder? Quality in rehabilitation from the patients' perspective].

PubMed

Grande, G; Romppel, M

2010-12-01

The definition of "good" quality in health research and quality management in health care and rehabilitation are primarily based on health professionals and their associations. But laypersons, patients, and participants in rehabilitation programmes, too, develop cognitive concepts about what defines good quality in health care. Until now systematic knowledge about the role of the patients' views on quality in rehabilitation is rare. Existing data demonstrate that patients report detailed ideas about indicators and preconditions of good quality of rehabilitative care. Patients' quality concepts differ in some aspect from the quality definitions of health care professionals. There is some evidence that patients' views on quality are a necessary extension and completion of programme evaluation and of quality management. They influence usage and selection of rehabilitation facilities and programme elements and probably patient satisfaction and long-term outcomes as well. Patients' ideas could contribute to gaining a deeper understanding of patients' needs. Here, patients are experts to define challenges for long-term improvements in health and health-related behavior with regard to everyday life and related resources and barriers. Taking patients' views on the quality of rehabilitation into account could help to adapt rehabilitation features, programmes and long-term offers more adequately to patients' needs. More systematic evidence is however needed as a basis for further developments in rehabilitation programmes. © Georg Thieme Verlag KG Stuttgart · New York.

48 CFR 246.408 - Single-agency assignments of Government contract quality assurance.

Code of Federal Regulations, 2010 CFR

2010-10-01

... of Government contract quality assurance. 246.408 Section 246.408 Federal Acquisition Regulations System DEFENSE ACQUISITION REGULATIONS SYSTEM, DEPARTMENT OF DEFENSE CONTRACT MANAGEMENT QUALITY ASSURANCE Government Contract Quality Assurance 246.408 Single-agency assignments of Government contract...

Adaptive model training system and method

DOEpatents

Bickford, Randall L; Palnitkar, Rahul M; Lee, Vo

2014-04-15

An adaptive model training system and method for filtering asset operating data values acquired from a monitored asset for selectively choosing asset operating data values that meet at least one predefined criterion of good data quality while rejecting asset operating data values that fail to meet at least the one predefined criterion of good data quality; and recalibrating a previously trained or calibrated model having a learned scope of normal operation of the asset by utilizing the asset operating data values that meet at least the one predefined criterion of good data quality for adjusting the learned scope of normal operation of the asset for defining a recalibrated model having the adjusted learned scope of normal operation of the asset.

Adaptive model training system and method

DOEpatents

Bickford, Randall L; Palnitkar, Rahul M

2014-11-18

An adaptive model training system and method for filtering asset operating data values acquired from a monitored asset for selectively choosing asset operating data values that meet at least one predefined criterion of good data quality while rejecting asset operating data values that fail to meet at least the one predefined criterion of good data quality; and recalibrating a previously trained or calibrated model having a learned scope of normal operation of the asset by utilizing the asset operating data values that meet at least the one predefined criterion of good data quality for adjusting the learned scope of normal operation of the asset for defining a recalibrated model having the adjusted learned scope of normal operation of the asset.

An audit on technical quality of root fillings performed by undergraduate students.

PubMed

Fong, W; Heidarifar, O; Killough, S; Lappin, M J; El Karim, I A

2018-04-01

To evaluate radiographically the technical quality of root fillings performed by undergraduate dental students and to assess whether students were exposed to an appropriate endodontic case mix during their clinical training. A retrospective audit was undertaken evaluating the clinical records of patients who underwent endodontic procedures during the period from September 2015 to June 2016 in the Dental School at Queen's University Belfast, UK. Two final-year dental students were trained and calibrated to evaluate postoperative intra-oral periapical radiographs of completed root canal treatments using specific assessment criteria. Data were presented as frequencies, percentage and mean ± standard deviation (SD). Comparisons of treatment outcomes between groups (posterior and anterior teeth) were calculated using Fisher's exact test, and the level of significance was set at P < 0.05. Intra- and interexaminer reproducibility was assessed by Kappa statistics. A total of 222 teeth and 381 canals were assessed, and of those, 253 (66%) of the root fillings were found to be acceptable in all the assessment parameters, namely taper, length and lateral adaptation of the root filling. Subanalysis of individual root filling parameters revealed that 372 canals (97%) exhibited good taper, and 275 canals (72%) were considered to be of an appropriate length, with 89 canals (23%) found to be underfilled and 17 canals (5%) overfilled. Overall 346 (91%) of canals had good lateral condensation. Students treated both single and multirooted teeth, and there was no significant association between tooth type and the quality of root filling provided (P > 0.05). In the majority of the teeth treated by undergraduate students at Queen's University Belfast, the technical quality of the root filling was acceptable and students were exposed to an appropriate case mix for endodontic training. © 2017 International Endodontic Journal. Published by John Wiley & Sons Ltd.

Inter-laboratory quality control for hormone-dependent gene expression in human breast tumors using real-time reverse transcription-polymerase chain reaction.

PubMed

de Cremoux, P; Bieche, I; Tran-Perennou, C; Vignaud, S; Boudou, E; Asselain, B; Lidereau, R; Magdelénat, H; Becette, V; Sigal-Zafrani, B; Spyratos, F

2004-09-01

Quantitative reverse transcription-polymerase chain reaction (RT-PCR) used to detect minor changes in specific mRNA concentrations may be associated with poor reproducibility. Stringent quality control is therefore essential at each step of the protocol, including the PCR procedure. We performed inter-laboratory quality control of quantitative PCR between two independent laboratories, using in-house RT-PCR assays on a series of hormone-related target genes in a retrospective consecutive series of 79 breast tumors. Total RNA was reverse transcribed in a single center. Calibration curves were performed for five target genes (estrogen receptor (ER)alpha, ERbeta, progesterone receptor (PR), CYP19 (aromatase) and Ki 67) and for two reference genes (human acidic ribosomal phosphoprotein PO (RPLPO) and TATA box-binding protein (TBP)). Amplification efficiencies of the calibrator were determined for each run and used to calculate mRNA expression. Correlation coefficients were evaluated for each target and each reference gene. A good correlation was observed for all target and reference genes in both centers using their own protocols and kits (P < 0.0001). The correlation coefficients ranged from 0.90 to 0.98 for the various target genes in the two centers. A good correlation was observed between the level of expression of the ERalpha and the PR transcripts (P < 0.001). A weak inverse correlation was observed in both centers between ERalpha and ERbeta levels, but only when TBP was the reference gene. No other correlation was observed with other parameters. Real-time PCR assays allow convenient quantification of target mRNA transcripts and quantification of target-derived nucleic acids in clinical specimens. This study addresses the importance of inter-laboratory quality controls for the use of a panel of real-time PCR assays devoted to clinical samples and protocols and to ensure their appropriate accuracy. This can also facilitate exchanges and multicenter comparison of data.

Is quality of cardiac hospital care a public or private good?

PubMed

Chen, Hsueh-Fen; Bazzoli, Gloria J; Harless, David W; Clement, Jan P

2010-11-01

There are many studies examining the effects of financial pressure from different payment sources on hospital quality of care, but most have assumed that quality of care is a public good in that payment changes from one payer will affect all hospital patients rather than just those directly associated with the payer. Although quality of hospital care can be either a public or private good, few studies have tested which of these scenarios are more likely to hold. To examine whether the change in the magnitude of in-hospital mortality for Medicare and managed care patients is different based on financial pressure resulting from the Balanced Budget Act and growing managed care market penetration; and to examine what role hospital competition may play in affecting these changes. The unit of analysis for the study was the hospital. Multiple data sources were used including the Agency for Healthcare Research and Quality State Inpatient Databases, American Hospital Association Annual Surveys, Area Resource File, and health maintenance organization data from InterStudy. A difference-in-difference-in-difference model was applied for a 2-period panel design. In general, Balanced Budget Act financial pressure and managed care market share did not magnify the difference in in-hospital mortality rates between Medicare and managed care patients. The results suggest that quality of cardiac care in the hospital setting is more likely to be a public good; however, more investigation using other quality indicators and the role of hospital competition under different payment systems is recommended.

The influence of re-employment on quality of life and self-rated health, a longitudinal study among unemployed persons in the Netherlands

PubMed Central

2013-01-01

Background Unemployed persons have a poorer health compared with employed persons and unemployment may cause ill health. The aim of this study was to investigate the effect of re-employment on quality of life and health among unemployed persons on social benefits. Methods A prospective study with 18 months follow-up was conducted among unemployed persons (n=4,308) in the Netherlands, receiving either unemployment benefits or social security benefits. Quality of life, self-rated health, and employment status were measured at baseline and every 6 months of follow up with questionnaires. Generalized estimating equations (GEE) modeling was performed to study the influence of re-employment on change in self-rated health and quality of life over time. Results In the study population 29% had a less than good quality of life and 17% had a poor self-rated health. Persons who started with paid employment during the follow-up period were more likely to improve towards a good quality of life (OR 1.76) and a good self-rated health (OR 2.88) compared with those persons who remained unemployed. Up to 6 months after re-employment, every month with paid employment, the likelihood of a good quality of life increased (OR 1.12). Conclusions Starting with paid employment improves quality of life and self-rated health. This suggests that labour force participation should be considered as an important measure to improve health of unemployed persons. Improving possibilities for unemployed persons to find paid employment will reduce socioeconomic inequalities in health. PMID:23706106

Association of consumers' sex and eyedness and lighting and wall color of a store with price attraction and perceived quality of goods and inside visual appeal.

PubMed

Barli, Onder; Bilgili, Bilsen; Dane, Senol

2006-10-01

The associations of sex and eyedness of consumers in a market and the market's lighting and wall color with price attraction and perceived quality of goods and the inside visual appeal were studied using an inventory after shopping by 440 men and 478 women, 20 to 60 years old (M = 29.3, SD = 10.2). Two lights (soft and bright) and 4 colors (blue, yellow, green, and red) and neutral light (white) were used. Women rated the prices of goods more attractive compared to men. In the total sample, left-eye preferents rated visual appeal higher compared to right-eye preferents. Bright light was associated with higher visual appeal than soft light. Green was associated with the highest inside visual appeal and perceived quality of goods, which may be due to its intermediate wavelength.

Culture-specific patterns in the prediction of life satisfaction: roles of emotion, relationship quality, and self-esteem.

PubMed

Kang, Sun-Mee; Shaver, Phillip R; Sue, Stanley; Min, Kyung-Hwan; Jing, Hauibin

2003-12-01

This study was conducted to explore the culture-specific roles of emotion, relationship quality, and self-esteem in determining life satisfaction. It was hypothesized that maintaining good interpersonal relationships would make individuals in collectivistic cultures not only feel good about their lives but also feel better about themselves. Furthermore, two emotion variables--emotional expression and emotion differentiation--were proposed as possible determinants of relationship quality. It was hypothesized that emotional expressiveness would be more important for maintaining good interpersonal relationships in individualistic societies but emotion differentiation would be more important in collectivistic cultures. These hypotheses were tested with Euro-American, Asian American, Korean, and Chinese groups using multigroup analyses in a structural equation model. Results supported all proposed hypotheses and indicated that emotion differentiation contributes to maintaining good interpersonal relationships in collectivistic cultures, which contributes to self-esteem and satisfaction with life.

Good Citizenship: Quality Education Program Study. Booklet 5 (Description) and Booklet 5-A (Needs Assessment).

ERIC Educational Resources Information Center

Bucks County Public Schools, Doylestown, PA.

Categories of effective and ineffective behavior in regard to Goal Five of the Quality Education Program (regarding good citizenship) are listed. Both the rationales for areas of effective student behavior and the categories of teacher strategies are also included. (See TM 001 375 for project description.) (MS)

Is New Work Good Work?

ERIC Educational Resources Information Center

Westwood, Andy

Some new work is good work. Quality is ultimately defined by the individual. However, these perceptions are inevitably colored by the circumstances in which people find themselves, by the time, place, and wide range of motivations for having to do a particular job in the first place. One person's quality may be another's purgatory and vice versa.…

49 CFR 179.200-17 - Bottom outlets.

Code of Federal Regulations, 2010 CFR

2010-10-01

... valve due to stresses or shocks incident to transportation. (5) Bottom outlet nozzle of interior valves..., they must be of good weldable quality in conjunction with metal of tank. (6) To provide for the... welded to tank, they shall be of good weldable quality in conjunction with metal of tank. (3) If the...

49 CFR 179.200-17 - Bottom outlets.

Code of Federal Regulations, 2013 CFR

2013-10-01

... valve due to stresses or shocks incident to transportation. (5) Bottom outlet nozzle of interior valves..., they must be of good weldable quality in conjunction with metal of tank. (6) To provide for the... welded to tank, they shall be of good weldable quality in conjunction with metal of tank. (3) If the...

49 CFR 179.200-17 - Bottom outlets.

Code of Federal Regulations, 2014 CFR

2014-10-01

... valve due to stresses or shocks incident to transportation. (5) Bottom outlet nozzle of interior valves..., they must be of good weldable quality in conjunction with metal of tank. (6) To provide for the... welded to tank, they shall be of good weldable quality in conjunction with metal of tank. (3) If the...

49 CFR 179.200-17 - Bottom outlets.

Code of Federal Regulations, 2012 CFR

2012-10-01

... valve due to stresses or shocks incident to transportation. (5) Bottom outlet nozzle of interior valves..., they must be of good weldable quality in conjunction with metal of tank. (6) To provide for the... welded to tank, they shall be of good weldable quality in conjunction with metal of tank. (3) If the...

49 CFR 179.200-17 - Bottom outlets.

Code of Federal Regulations, 2011 CFR

2011-10-01

... valve due to stresses or shocks incident to transportation. (5) Bottom outlet nozzle of interior valves..., they must be of good weldable quality in conjunction with metal of tank. (6) To provide for the... welded to tank, they shall be of good weldable quality in conjunction with metal of tank. (3) If the...

Structural relations of convenience food satisfaction and quality of life according to dietary style: Focusing on singles in metropolitan area of Korea.

PubMed

Kim, Boram; Joo, Nami

2014-10-01

Although the issues of singles' dietary style and quality of life are becoming important due to the increasing number of singles with economic power, little research has been conducted to date on singles' use of convenience food and quality of life in relation to their dietary style. Thus, the present study intends to provide basic data to improve the quality of life by determining the current status of the use of convenience food and explicating its relationship with quality of life through analyzing the dietary lifestyles of the singles. The targets of this study were singles, identified as adults between the ages of 25 and 54, living alone, either legally or in actuality having no partner. A statistical analysis of 208 surveys from Seoul, respectively, was conducted using SPSS12.0 for Windows and SEM using AMOS 5.0 statistics package. The convenience-oriented was shown to have a significant positive effect on convenience food satisfaction. HMR satisfaction was found to have a significant effect on positive psychological satisfaction and the convenience-oriented was found to have a significant negative effect on all aspects of quality of life satisfaction. There must be persistent development of food industries considering the distinctive characteristics of the lives of singles in order to satisfy their needs and improve the quality of their lives.

Extremely simple holographic projection of color images

NASA Astrophysics Data System (ADS)

Makowski, Michal; Ducin, Izabela; Kakarenko, Karol; Suszek, Jaroslaw; Kolodziejczyk, Andrzej; Sypek, Maciej

2012-03-01

A very simple scheme of holographic projection is presented with some experimental results showing good quality image projection without any imaging lens. This technique can be regarded as an alternative to classic projection methods. It is based on the reconstruction real images from three phase iterated Fourier holograms. The illumination is performed with three laser beams of primary colors. A divergent wavefront geometry is used to achieve an increased throw angle of the projection, compared to plane wave illumination. Light fibers are used as light guidance in order to keep the setup as simple as possible and to provide point-like sources of high quality divergent wave-fronts at optimized position against the light modulator. Absorbing spectral filters are implemented to multiplex three holograms on a single phase-only spatial light modulator. Hence color mixing occurs without any time-division methods, which cause rainbow effects and color flicker. The zero diffractive order with divergent illumination is practically invisible and speckle field is effectively suppressed with phase optimization and time averaging techniques. The main advantages of the proposed concept are: a very simple and highly miniaturizable configuration; lack of lens; a single LCoS (Liquid Crystal on Silicon) modulator; a strong resistance to imperfections and obstructions of the spatial light modulator like dead pixels, dust, mud, fingerprints etc.; simple calculations based on Fast Fourier Transform (FFT) easily processed in real time mode with GPU (Graphic Programming).

Long-term average spectrum in screening of voice quality in speech: untrained male university students.

PubMed

Leino, Timo

2009-11-01

Voice quality has mainly been studied in trained speakers, singers, and dysphonic patients. Few studies have concerned ordinary untrained university students' voices. In light of earlier studies of professional voice users, it was hypothesized that good, poor, and intermediate voices would be distinguishable on the basis of long-term average spectrum characteristics. In the present study, voice quality of 50 Finnish vocally untrained male university students was studied perceptually and using long-term average spectrum analysis of text reading samples of one minute duration. Equivalent sound level (Leq) of text reading was also measured. According to the results, the good and ordinary voices differed from the poor ones in their relatively higher sound level in the frequency range of 1-3 kHz and a prominent peak at 3-4 kHz. Good voices, however, did not differ from the ordinary voices in terms of the characteristics of the long-term average spectrum (LTAS). The strength of the peak at 3-4 kHz and the voice-quality scores correlated weakly but significantly. Voice quality and alpha ratio (level difference above and below 1 kHz) correlated likewise. Leq was significantly higher in the students with good and ordinary voices than in those with poor voices. The connections between Leq, voice quality, and the formation of the peak at 3-4 kHz warrant further studies.

A Markovian model market—Akerlof's lemons and the asymmetry of information

NASA Astrophysics Data System (ADS)

Tilles, Paulo F. C.; Ferreira, Fernando F.; Francisco, Gerson; Pereira, Carlos de B.; Sarti, Flavia M.

2011-07-01

In this work we study an agent based model to investigate the role of asymmetric information degrees for market evolution. This model is quite simple and may be treated analytically since the consumers evaluate the quality of a certain good taking into account only the quality of the last good purchased plus her perceptive capacity β. As a consequence, the system evolves according to a stationary Markov chain. The value of a good offered by the firms increases along with quality according to an exponent α, which is a measure of the technology. It incorporates all the technological capacity of the production systems such as education, scientific development and techniques that change the productivity rates. The technological level plays an important role to explain how the asymmetry of information may affect the market evolution in this model. We observe that, for high technological levels, the market can detect adverse selection. The model allows us to compute the maximum asymmetric information degree before the market collapses. Below this critical point the market evolves during a limited period of time and then dies out completely. When β is closer to 1 (symmetric information), the market becomes more profitable for high quality goods, although high and low quality markets coexist. The maximum asymmetric information level is a consequence of an ergodicity breakdown in the process of quality evaluation.

What is a 'good' job? Modelling job quality for blue collar workers.

PubMed

Jones, Wendy; Haslam, Roger; Haslam, Cheryl

2017-01-01

This paper proposes a model of job quality, developed from interviews with blue collar workers: bus drivers, manufacturing operatives and cleaners (n  =  80). The model distinguishes between core features, important for almost all workers, and 'job fit' features, important to some but not others, or where individuals might have different preferences. Core job features found important for almost all interviewees included job security, personal safety and having enough pay to meet their needs. 'Job fit' features included autonomy and the opportunity to form close relationships. These showed more variation between participants; priorities were influenced by family commitments, stage of life and personal preference. The resulting theoretical perspective indicates the features necessary for a job to be considered 'good' by the person doing it, whilst not adversely affecting their health. The model should have utility as a basis for measuring and improving job quality and the laudable goal of creating 'good jobs'. Practitioner Summary: Good work can contribute positively to health and well-being, but there is a lack of agreement regarding the concept of a 'good' job. A model of job quality has been constructed based on semi-structured worker interviews (n  =  80). The model emphasises the need to take into account variation between individuals in their preferred work characteristics.

Aging and quality of life of elderly people in rural areas.

PubMed

Garbaccio, Juliana Ladeira; Tonaco, Luís Antônio Batista; Estêvão, Wilson Goulart; Barcelos, Bárbara Jacome

2018-01-01

To evaluate the quality of life and health of elderly in rural areas of Minas Gerais State's center-west. Cross-sectional study, in four municipalities of Minas Gerais State, by interviewing elderly people. Associations between socio-demographic and quality of life variables were tested, separated into "satisfactory"/"unsatisfactory" with values from the median of positive answers. It was used the chi-square test, Fisher's test and regression. 182 elderly answered the questions and showed a relation with the "satisfactory" quality of life - bivariate (p < 0.05): age by 69 years (61.6%), married (61.7%), living by 54 years in rural areas (68%), with no financial support (59.5%), living with someone else (61%), non-smoker (60%), presenting good health (76.7%), satisfied with life (69.6%); regression: not having financial support, living with someone else and not smoking. Elderly people in rural areas present good quality of life/health in the cognitive aspect, access to services, goods, habits, but awareness must be constant due to their weakness.

3D T2-weighted imaging to shorten multiparametric prostate MRI protocols.

PubMed

Polanec, Stephan H; Lazar, Mathias; Wengert, Georg J; Bickel, Hubert; Spick, Claudio; Susani, Martin; Shariat, Shahrokh; Clauser, Paola; Baltzer, Pascal A T

2018-04-01

To determine whether 3D acquisitions provide equivalent image quality, lesion delineation quality and PI-RADS v2 performance compared to 2D acquisitions in T2-weighted imaging of the prostate at 3 T. This IRB-approved, prospective study included 150 consecutive patients (mean age 63.7 years, 35-84 years; mean PSA 7.2 ng/ml, 0.4-31.1 ng/ml). Two uroradiologists (R1, R2) independently rated image quality and lesion delineation quality using a five-point ordinal scale and assigned a PI-RADS score for 2D and 3D T2-weighted image data sets. Data were compared using visual grading characteristics (VGC) and receiver operating characteristics (ROC)/area under the curve (AUC) analysis. Image quality was similarly good to excellent for 2D T2w (mean score R1, 4.3 ± 0.81; R2, 4.7 ± 0.83) and 3D T2w (mean score R1, 4.3 ± 0.82; R2, 4.7 ± 0.69), p = 0.269. Lesion delineation was rated good to excellent for 2D (mean score R1, 4.16 ± 0.81; R2, 4.19 ± 0.92) and 3D T2w (R1, 4.19 ± 0.94; R2, 4.27 ± 0.94) without significant differences (p = 0.785). ROC analysis showed an equivalent performance for 2D (AUC 0.580-0.623) and 3D (AUC 0.576-0.629) T2w (p > 0.05, respectively). Three-dimensional acquisitions demonstrated equivalent image and lesion delineation quality, and PI-RADS v2 performance, compared to 2D in T2-weighted imaging of the prostate. Three-dimensional T2-weighted imaging could be used to considerably shorten prostate MRI protocols in clinical practice. • 3D shows equivalent image quality and lesion delineation compared to 2D T2w. • 3D T2w and 2D T2w image acquisition demonstrated comparable diagnostic performance. • Using a single 3D T2w acquisition may shorten the protocol by 40%. • Combined with short DCE, multiparametric protocols of 10 min are feasible.

Understanding and development of manufacturable screen-printed contacts on high sheet-resistance emitters for low-cost silicon solar cells

NASA Astrophysics Data System (ADS)

Hilali, Mohamed M.

2005-11-01

A simple cost-effective approach was proposed and successfully employed to fabricate high-quality screen-printed (SP) contacts to high sheet-resistance emitters (100 O/sq) to improve the Si solar cell efficiency. Device modeling was used to quantify the performance enhancement possible from the high sheet-resistance emitter for various cell designs. It was found that for performance enhancement from the high sheet-resistance emitter, certain cell design criteria must be satisfied. Model calculations showed that in order to achieve any performance enhancement over the conventional ˜40 O/sq emitter, the high sheet resistance emitter solar cell must have a reasonably good (<120,000 cm/s) or low front-surface recombination velocity (FSRV). Model calculations were also performed to establish requirements for high fill factors (FFs). The results showed that the series resistance should be less than 0.8 O-cm2, the shunt resistance should be greater than 1000 O-cm2, and the junction leakage current should be less than 25 nA/cm2. Analytical microscopy and surface analysis techniques were used to study the Ag-Si contact interface of different SP Ag pastes. Physical and electrical properties of SP Ag thick-film contacts were studied and correlated to understand and achieve good-quality ohmic contacts to high sheet-resistance emitters for solar cells. This information was then used to define the criteria for high-quality screen-printed contacts. The role of paste constituents and firing scheme on contact quality were investigated to tailor the high-quality screen-printed contact interface structure that results in high performance solar cells. Results indicated that small particle size, high glass transition temperature, rapid firing and less aggressive glass frit help in producing high-quality contacts. Based on these results high-quality SP contacts with high FFs > 0.78 on high sheet-resistance emitters were achieved for the first time using a simple single-step firing process. This technology was applied to different substrates (monocrystalline and multicrystalline) and surfaces (textured and planar). Cell efficiencies of ˜16.2% on low-cost EFG ribbon substrates were achieved on high sheet-resistance emitters with SP contacts. A record high-efficiency SP solar cell of 19% with textured high sheet-resistance emitter was also fabricated and modeled.

A comparison of visual outcomes in three different types of monofocal intraocular lenses

PubMed Central

Shetty, Vijay; Haldipurkar, Suhas S; Gore, Rujuta; Dhamankar, Rita; Paik, Anirban; Setia, Maninder Singh

2015-01-01

AIM To compare the visual outcomes (distance and near) in patients opting for three different types of monofocal intraocular lens (IOL) (Matrix Aurium, AcrySof single piece, and AcrySof IQ lens). METHODS The present study is a cross-sectional analysis of secondary clinical data collected from 153 eyes (52 eyes in Matrix Aurium, 48 in AcrySof single piece, and 53 in AcrySof IQ group) undergoing cataract surgery (2011-2012). We compared near vision, distance vision, distance corrected near vision in these three types of lenses on day 15 (±3) post-surgery. RESULTS About 69% of the eyes in the Matrix Aurium group had good uncorrected distance vision post-surgery; the proportion was 48% and 57% in the AcrySof single piece and AcrySof IQ group (P=0.09). The proportion of eyes with good distance corrected near vision were 38%, 33%, and 15% in the Matrix Aurium, AcrySof single piece, and AcrySof IQ groups respectively (P=0.02). Similarly, The proportion with good “both near and distance vision” were 38%, 33%, and 15% in the Matrix Aurium, AcrySof single piece, and AcrySof IQ groups respectively (P=0.02). It was only the Matrix Aurium group which had significantly better both “distance and near vision” compared with the AcrySof IQ group (odds ratio: 5.87, 95% confidence intervals: 1.68 to 20.56). CONCLUSION Matrix Aurium monofocal lenses may be a good option for those patients who desire to have a good near as well as distance vision post-surgery. PMID:26682168

A comparison of visual outcomes in three different types of monofocal intraocular lenses.

PubMed

Shetty, Vijay; Haldipurkar, Suhas S; Gore, Rujuta; Dhamankar, Rita; Paik, Anirban; Setia, Maninder Singh

2015-01-01

To compare the visual outcomes (distance and near) in patients opting for three different types of monofocal intraocular lens (IOL) (Matrix Aurium, AcrySof single piece, and AcrySof IQ lens). The present study is a cross-sectional analysis of secondary clinical data collected from 153 eyes (52 eyes in Matrix Aurium, 48 in AcrySof single piece, and 53 in AcrySof IQ group) undergoing cataract surgery (2011-2012). We compared near vision, distance vision, distance corrected near vision in these three types of lenses on day 15 (±3) post-surgery. About 69% of the eyes in the Matrix Aurium group had good uncorrected distance vision post-surgery; the proportion was 48% and 57% in the AcrySof single piece and AcrySof IQ group (P=0.09). The proportion of eyes with good distance corrected near vision were 38%, 33%, and 15% in the Matrix Aurium, AcrySof single piece, and AcrySof IQ groups respectively (P=0.02). Similarly, The proportion with good "both near and distance vision" were 38%, 33%, and 15% in the Matrix Aurium, AcrySof single piece, and AcrySof IQ groups respectively (P=0.02). It was only the Matrix Aurium group which had significantly better both "distance and near vision" compared with the AcrySof IQ group (odds ratio: 5.87, 95% confidence intervals: 1.68 to 20.56). Matrix Aurium monofocal lenses may be a good option for those patients who desire to have a good near as well as distance vision post-surgery.

Quality analysis of patient information about knee arthroscopy on the World Wide Web.

PubMed

Sambandam, Senthil Nathan; Ramasamy, Vijayaraj; Priyanka, Priyanka; Ilango, Balakrishnan

2007-05-01

This study was designed to ascertain the quality of patient information available on the World Wide Web on the topic of knee arthroscopy. For the purpose of quality analysis, we used a pool of 232 search results obtained from 7 different search engines. We used a modified assessment questionnaire to assess the quality of these Web sites. This questionnaire was developed based on similar studies evaluating Web site quality and includes items on illustrations, accessibility, availability, accountability, and content of the Web site. We also compared results obtained with different search engines and tried to establish the best possible search strategy to attain the most relevant, authentic, and adequate information with minimum time consumption. For this purpose, we first compared 100 search results from the single most commonly used search engine (AltaVista) with the pooled sample containing 20 search results from each of the 7 different search engines. The search engines used were metasearch (Copernic and Mamma), general search (Google, AltaVista, and Yahoo), and health topic-related search engines (MedHunt and Healthfinder). The phrase "knee arthroscopy" was used as the search terminology. Excluding the repetitions, there were 117 Web sites available for quality analysis. These sites were analyzed for accessibility, relevance, authenticity, adequacy, and accountability by use of a specially designed questionnaire. Our analysis showed that most of the sites providing patient information on knee arthroscopy contained outdated information, were inadequate, and were not accountable. Only 16 sites were found to be providing reasonably good patient information and hence can be recommended to patients. Understandably, most of these sites were from nonprofit organizations and educational institutions. Furthermore, our study revealed that using multiple search engines increases patients' chances of obtaining more relevant information rather than using a single search engine. Our study shows the difficulties encountered by patients in obtaining information regarding knee arthroscopy and highlights the duty of knee surgeons in helping patients to identify the relevant and authentic information in the most efficient manner from the World Wide Web. This study highlights the importance of the role of orthopaedic surgeons in helping their patients to identify the best possible information on the World Wide Web.

Techniques for grid manipulation and adaptation. [computational fluid dynamics

NASA Technical Reports Server (NTRS)

Choo, Yung K.; Eisemann, Peter R.; Lee, Ki D.

1992-01-01

Two approaches have been taken to provide systematic grid manipulation for improved grid quality. One is the control point form (CPF) of algebraic grid generation. It provides explicit control of the physical grid shape and grid spacing through the movement of the control points. It works well in the interactive computer graphics environment and hence can be a good candidate for integration with other emerging technologies. The other approach is grid adaptation using a numerical mapping between the physical space and a parametric space. Grid adaptation is achieved by modifying the mapping functions through the effects of grid control sources. The adaptation process can be repeated in a cyclic manner if satisfactory results are not achieved after a single application.

Temperature coefficients and radiation induced DLTS spectra of MOCVD grown n(+)p InP solar cells

NASA Technical Reports Server (NTRS)

Walters, Robert J.; Statler, Richard L.; Summers, Geoffrey P.

1991-01-01

The effects of temperature and radiation on n(+)p InP solar cells and mesa diodes grown by metallorganic chemical vapor deposition (MOCVD) were studied. It was shown that MOCVD is capable of consistently producing good quality InP solar cells with Eff greater than 19 percent which display excellent radiation resistance due to minority carrier injection and thermal annealing. It was also shown that universal predictions of InP device performance based on measurements of a small group of test samples can be expected to be quite accurate, and that the degradation of an InP device due to any incident particle spectrum should be predictable from a measurement following a single low energy proton irradiation.

Coherent emission from integrated Talbot-cavity quantum cascade lasers.

PubMed

Meng, Bo; Qiang, Bo; Rodriguez, Etienne; Hu, Xiao Nan; Liang, Guozhen; Wang, Qi Jie

2017-02-20

We report experimental realization of phase-locked quantum cascade laser (QCL) array using a monolithically integrated Talbot cavity. An array with six laser elements at a wavelength of ~4.8 μm shows a maximum peak power of ~4 W which is more than 5 times higher than that of a single ridge laser element and a slope efficiency of 1 W/A at room temperature. Operation of in-phase coherent supermode has been achieved over the whole dynamic range of the Talbot-cavity QCL. The structure was analysed using a straightforward theoretical model, showing quantitatively good agreement with the experimental results. The reduced thermal resistance makes the structure an attractive approach to achieve high beam quality continuous wave QCLs.

Fabrication and Characterization of Vertically Aligned ZnO Nanorod Arrays via Inverted Monolayer Colloidal Crystals Mask

NASA Astrophysics Data System (ADS)

Chen, Cheng; Ding, Taotao; Qi, Zhiqiang; Zhang, Wei; Zhang, Jun; Xu, Juan; Chen, Jingwen; Dai, Jiangnan; Chen, Changqing

2018-04-01

The periodically ordered ZnO nanorod (NR) arrays have been successfully synthesized via a hydrothermal approach on the silicon substrates by templating of the TiO2 ring deriving from the polystyrene (PS) nanosphere monolayer colloidal crystals (MCC). With the inverted MCC mask, sol-gel-derived ZnO seeds could serve as the periodic nucleation positions for the site-specific growth of ZnO NRs. The large-scale patterned arrays of single ZnO NR with good side-orientation can be readily produced. According to the experimental results, the as-integrated ZnO NR arrays showed an excellent crystal quality and optical property, very suitable for optoelectronic applications such as stimulated emitters and ZnO photonic crystal devices.

Tapered fiber based high power random laser.

PubMed

Zhang, Hanwei; Du, Xueyuan; Zhou, Pu; Wang, Xiaolin; Xu, Xiaojun

2016-04-18

We propose a novel high power random fiber laser (RFL) based on tapered fiber. It can overcome the power scaling limitation of RFL while maintaining good beam quality to a certain extent. An output power of 26.5 W has been achieved in a half-open cavity with one kilometer long tapered fiber whose core diameter gradually changes from 8 μm to 20 μm. The steady-state light propagation equations have been modified by taking into account the effective core area to demonstrate the tapered RFL through numerical calculations. The numerical model effectively describes the power characteristics of the tapered fiber based RFL, and both the calculating and experimental results show higher power exporting potential compared with the conventional single mode RFL.

Jonckheere Double Star Photometry – Part IX: Sagitta

NASA Astrophysics Data System (ADS)

Knapp, Wilfried

2018-01-01

If any double star discoverer is in urgent need of photometry then it is Jonckheere. There are over 3000 Jonckheere objects listed in the WDS catalog and a good part with magnitudes obviously far too bright. This report covers a part of the Jonckheere objects in the constellation Sagitta including a check if physical by means of UCAC5 proper motion data. In most cases only one image per object is taken for differential photometry as even a single image based measurement is better than the currently often given mere estimation. As by-product a new CPM candidate pair was discovered and as appendix the UCAC5 proper motion data quality was counter-checked with GAIA DR1 (TGAS).

Groundwater-quality data from the eastern Snake River Plain Aquifer, Jerome and Gooding Counties, south-central Idaho, 2017

USGS Publications Warehouse

Skinner, Kenneth D.

2018-05-11

Groundwater-quality samples and water-level data were collected from 36 wells in the Jerome/Gooding County area of the eastern Snake River Plain aquifer during June 2017. The wells included 30 wells sampled for the U.S. Geological Survey’s National Water-Quality Assessment project, plus an additional 6 wells were selected to increase spatial distribution. The data provide water managers with the ability for an improved understanding of groundwater quality and flow directions in the area. Groundwater-quality samples were analyzed for nutrients, major ions, trace elements, and stable isotopes of water. Quality-assurance and quality-control measures consisted of multiple blank samples and a sequential replicate sample. All data are available online at the USGS National Water Information System.

Diagnostic accuracy of refractometry for assessing bovine colostrum quality: A systematic review and meta-analysis.

PubMed

Buczinski, S; Vandeweerd, J M

2016-09-01

Provision of good quality colostrum [i.e., immunoglobulin G (IgG) concentration ≥50g/L] is the first step toward ensuring proper passive transfer of immunity for young calves. Precise quantification of colostrum IgG levels cannot be easily performed on the farm. Assessment of the refractive index using a Brix scale with a refractometer has been described as being highly correlated with IgG concentration in colostrum. The aim of this study was to perform a systematic review of the diagnostic accuracy of Brix refractometry to diagnose good quality colostrum. From 101 references initially obtain ed, 11 were included in the systematic review meta-analysis representing 4,251 colostrum samples. The prevalence of good colostrum samples with IgG ≥50g/L varied from 67.3 to 92.3% (median 77.9%). Specific estimates of accuracy [sensitivity (Se) and specificity (Sp)] were obtained for different reported cut-points using a hierarchical summary receiver operating characteristic curve model. For the cut-point of 22% (n=8 studies), Se=80.2% (95% CI: 71.1-87.0%) and Sp=82.6% (71.4-90.0%). Decreasing the cut-point to 18% increased Se [96.1% (91.8-98.2%)] and decreased Sp [54.5% (26.9-79.6%)]. Modeling the effect of these Brix accuracy estimates using a stochastic simulation and Bayes theorem showed that a positive result with the 22% Brix cut-point can be used to diagnose good quality colostrum (posttest probability of a good colostrum: 94.3% (90.7-96.9%). The posttest probability of good colostrum with a Brix value <18% was only 22.7% (12.3-39.2%). Based on this study, the 2 cut-points could be alternatively used to select good quality colostrum (sample with Brix ≥22%) or to discard poor quality colostrum (sample with Brix <18%). When sample results are between these 2 values, colostrum supplementation should be considered. Copyright © 2016 American Dairy Science Association. Published by Elsevier Inc. All rights reserved.

PRINTQUAL - a measure for assessing the quality of newspaper reporting of suicide.

PubMed

John, Ann; Hawton, Keith; Lloyd, Keith; Luce, Ann; Platt, Stephen; Scourfield, Jonathan; Marchant, Amanda L; Jones, Phil A; Dennis, Mick S

2014-01-01

Many studies have demonstrated a relationship between newspaper reporting of actual or fictional suicides and subsequent suicidal behaviors. Previous measures of the quality of reporting lack consistency concerning which specific elements should be included and how they should be weighted. To develop an instrument, PRINTQUAL, comprising two scales of the quality (poor and good) of newspaper reporting of suicide that can be used in future studies of reporting. A first draft of the PRINTQUAL instrument was compiled, comprising items indicative of poor- and good-quality newspaper reporting based on guidelines and key sources of evidence. This was refined by team members and then circulated to a group of international experts in the field for further opinion and weighting of individual items. The final instrument comprised 19 items in the poor-quality scale and four in the good-quality scale. Following training, agreement between raters was acceptably high for most items (κ ≥ .75) except for three items for which agreement was still acceptable (κ ≥ .60). The PRINTQUAL instrument for assessing the quality of newspaper reporting of suicide appears appropriate for use in research and monitoring in future studies.

Feasibility of using of a simplified question in assessing diet quality of adolescents.

PubMed

Rodrigues, Paulo Rogério Melo; Gonçalves-Silva, Regina Maria Veras; Ferreira, Márcia Gonçalves; Pereira, Rosangela Alves

2017-05-01

This study aims to analyze the applicability of a simplified question in assessing diet quality of adolescents in a cross-sectional school-based study carried out in a sample of high school students. Diet quality self-perception was obtained when the participant was inquired about own diet considering "excellent", "good", "fair" or "poor" responses. We evaluated meals habits and food intake through food frequency questionnaire. The revised version of the Brazilian Healthy Eating Index (BHEI-R) was estimated and we identified three dietary patterns using factor analysis. "Good" self-perceived diet quality was reported by 56% of adolescents and was associated with regular consumption of fruits and vegetables, meal profile and high healthy eating index scores. However, consumption of foods harmful to health was not perceived as characteristic that affects diet quality. The evaluated question showed sensitivity of 28% to detect good quality diets and specificity of 79% to identify low nutritional value diets. The use of a simplified question to assess dietary habits of adolescents is limited, since the consumption of high-fat, high-sugar and high-sodium food was not recognized as an indicator of low quality diet.

A space satellite perspective to monitor water quality using ...

EPA Pesticide Factsheets

Good water quality is important for human health, economic development, and the health of our environment. Across the country, we face the challenge of degraded water quality in many of our rivers, lakes, coastal regions and oceans. The EPA National Rivers and Stream Assessment report found that more than half - 55 percent - of our rivers and streams are in poor condition for aquatic life. Likewise, the EPA Lakes Assessment found that 22 percent of our lakes are in poor condition for aquatic life. The reasons for unhealthy water quality are vast. Likewise, poor water quality has numerous impacts to ecosystems. One indicator, which trends during warm weather months, is the duration and frequency of harmful algal blooms. A healthy environment includes good water quality to support a rich and varied ecosystem, economic growth, and protects the health of the people in the community who rely on that water. Having the ability to monitor and provide timely response to harmful algal blooms would be one step in protecting the benefits people receive from good water quality (U.S. EPA 2010 and 2013). Published in the North American Lake Management Society-LakeLine Magazine.

Promoting Positive Behavior Using the Good Behavior Game: A Meta-Analysis of Single-Case Research

ERIC Educational Resources Information Center

Bowman-Perrott, Lisa; Burke, Mack D.; Zaini, Samar; Zhang, Nan; Vannest, Kimberly

2016-01-01

The Good Behavior Game (GBG) is a classroom management strategy that uses an interdependent group-oriented contingency to promote prosocial behavior and decrease problem behavior. This meta-analysis synthesized single-case research (SCR) on the GBG across 21 studies, representing 1,580 students in pre-kindergarten through Grade 12. The TauU effect…

Single fixed-dose oral dexketoprofen plus tramadol for acute postoperative pain in adults.

PubMed

Derry, Sheena; Cooper, Tess E; Phillips, Tudor

2016-09-22

Combining two different analgesics in fixed doses in a single tablet can provide better pain relief than either drug alone in acute pain. This appears to be broadly true across a range of different drug combinations, in postoperative pain and migraine headache. A new combination of dexketoprofen (a nonsteroidal anti-inflammatory drug) plus tramadol (an opioid) has been tested in acute postoperative pain conditions. It is not yet licensed for use. This review is one of a series on oral analgesics for acute postoperative pain. Individual reviews have been brought together in two overviews to provide information about the relative efficacy and harm of the different interventions. To assess the analgesic efficacy and adverse effects of a single fixed-dose of oral dexketoprofen plus tramadol, compared with placebo, for moderate to severe postoperative pain in adults, using methods that permit comparison with other analgesics evaluated in standardised trials using almost identical methods and outcomes. A secondary objective was to compare the combination with the individual analgesics alone. We searched the Cochrane Central Register of Controlled Trials (CENTRAL) via CRSO, MEDLINE via Ovid, and Embase via Ovid from inception to 31 May 2016. We also searched the reference lists of retrieved studies and reviews, and two online clinical trial registries. Randomised, double-blind trials of oral dexketoprofen plus tramadol administered as a single oral dose, for the relief of acute postoperative pain in adults, and compared to placebo. Two review authors independently considered trials for inclusion in the review, examined issues of study quality and potential bias, and extracted data. For dichotomous outcomes, we calculated risk ratio (RR) and number needed to treat for an additional beneficial outcome (NNT) for dexketoprofen plus tramadol, compared with placebo with 95% confidence intervals (CI). We collected information on the number of participants with at least 50% of the maximum possible pain relief over six hours, the median time to use of rescue medication, and the proportion of participants requiring rescue medication. We also collected information on adverse events and withdrawals. We assessed the quality of the evidence using GRADE and created a 'Summary of findings' table.We also collected information on the number of participants with at least 50% of the maximum possible pain relief over six hours for dexketoprofen alone and tramadol alone. We included three studies with 1853 participants who had undergone surgical removal of impacted wisdom teeth, hip replacement, or hysterectomy. The overall risk of bias across the three included studies was low, with unclear risk of bias in relation to the size of the three studies. Two studies did not report all our prespecified outcomes, which limited the analyses we could do.The proportion of participants achieving at least 50% pain relief over six hours with dexketoprofen 25 mg plus tramadol 75 mg was 66%, compared to 32% with placebo, giving an NNT of 3.0 (95% CI 2.5 to 3.7) (RR 2.1 (95% CI 1.7 to 2.4); 748 participants; 3 studies) (moderate quality evidence). The response rate with dexketoprofen 25 mg alone was 53% (RR 1.3 (95% CI 1.1 to 1.4); 744 participants; 3 studies) and with tramadol alone was 45% (RR 1.5 (95% CI 1.3 to 1.7); 741 participants; 3 studies) (moderate quality evidence). We downgraded the evidence because of some inconsistency in the results.The median time to use of rescue medication could not be estimated exactly, but was probably eight hours or more, indicating a long duration of effect (moderate quality evidence). We downgraded the evidence because it was not possible to estimate the effect exactly in the two multiple dose studies, resulting in imprecision. Fewer participants used rescue medication with higher doses of active treatment (summary statistic not calculated; 123 participants; 1 study) (very low quality evidence). We downgraded the evidence because the data came from a single study with few participants and events.Adverse events and serious adverse events were not reported consistently for the single dose phase of the studies. In the single dose study, 11% of participants experienced adverse events with dexketoprofen 25 mg plus tramadol 75 mg, which were mostly mild or moderate nausea, vomiting, or dizziness, and typical with these medicines. Rates were lower with placebo and lower doses (very low quality evidence). We downgraded the evidence because the data came from a single study with few participants and events. Information on multiple dosing over three and five days supported a low event rate with the combination. Overall, rates were generally low in all treatment arms, as they were for withdrawals for adverse events or other reasons. A single oral dose of dexketoprofen 25 mg plus tramadol 75 mg provided good levels of pain relief with long duration of action to more people than placebo or the same dose of dexketoprofen or tramadol alone. The magnitude of the effect was similar to other good analgesics. Adverse event rates were low.There is modest uncertainty about the precision of the point estimate for efficacy, but the NNT of 3 is consistent with other analgesics considered effective and commonly used.

Development of microchannel plate x-ray optics

NASA Technical Reports Server (NTRS)

Kaaret, Philip; Chen, Andrew

1994-01-01

The goal of this research program was to develop a novel technique for focusing x-rays based on the optical system of a lobster's eye. A lobster eye employs many closely packed reflecting surfaces arranged within a spherical or cylindrical shell. These optics have two unique properties: they have unlimited fields of view and can be manufactured via replication of identical structures. Because the angular resolution is given by the ratio of the size of the individual optical elements to the focal length, optical elements with sizes on the order of one hundred microns are required to achieve good angular resolution with a compact telescope. We employed anisotropic etching of single crystal silicon wafers for the fabrication of micron-scale optical elements. This technique, commonly referred to as silicon micromachining, is based on silicon fabrication techniques developed by the microelectronics industry. An anisotropic etchant is a chemical which etches certain silicon crystal planes much more rapidly than others. Using wafers in which the slowly etched crystal planes are aligned perpendicularly to the wafer surface, it is possible to etch a pattern completely through a wafer with very little distortion. Our optics consist of rectangular pores etched completely through group of zone axes (110) oriented silicon wafers. The larger surfaces of the pores (the mirror elements) were aligned with the group of zone axes (111) planes of the crystal perpendicular to the wafer surface. We have succeeded in producing silicon lenses with a geometry suitable for 1-d focusing x-ray optics. These lenses have an aspect ratio (40:1) suitable for x-ray reflection and have very good optical surface alignment. We have developed a number of process refinements which improved the quality of the lens geometry and the repeatability of the etch process. A significant progress was made in obtaining good optical surface quality. The RMS roughness was decreased from 110 A for our initial lenses to 30 A in the final lenses. A further factor of three improvement in surface quality is required for the production of efficient x-ray optics. In addition to the silicon fabrication, an x-ray beam line was constructed at Columbia for testing the optics.

Organic-Inorganic Hybrid Perovskite with Controlled Dopant Modification and Application in Photovoltaic Device.

PubMed

Zhao, Wangen; Yang, Dong; Liu, Shengzhong Frank

2017-07-01

Organic-inorganic hybrid perovskite as a kind of promising photovoltaic material is booming due to its low-cost, high defect tolerance, and easy fabrication, which result in the huge potential in industrial production. In the pursuit of high efficiency photovoltaic devices, high-quality absorbing layer is essential. Therefore, developing organic-inorganic hybrid perovskite thin films with good coverage, improved uniformity, and crystalline in a single pass deposition is of great concern in realizing good performance of perovskite thin-film solar cell. Here, it is found that the introduction of suitable amounts of LiI plays a dramatically positive role in enlarging the grain size and reducing the grain boundaries of absorbing layer. In addition, the carrier lifetime and built-in potential of the LiI doped perovskite device are observed to increase. Thus, it leads to about 15% gain in solar cell efficiency comparing to that without the LiI doping. Meanwhile, a hysteresis reduction is observed and 18.16% power conversion efficiency is achieved in LiI doped perovskite device, as well. © 2017 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Structure-Guided Discovery of Novel, Potent, and Orally Bioavailable Inhibitors of Lipoprotein-Associated Phospholipase A2.

PubMed

Liu, Qiufeng; Huang, Fubao; Yuan, Xiaojing; Wang, Kai; Zou, Yi; Shen, Jianhua; Xu, Yechun

2017-12-28

Lipoprotein-associated phospholipase A2 (Lp-PLA2) is a promising therapeutic target for atherosclerosis, Alzheimer's disease, and diabetic macular edema. Here we report the identification of novel sulfonamide scaffold Lp-PLA2 inhibitors derived from a relatively weak fragment. Similarity searching on this fragment followed by molecular docking leads to the discovery of a micromolar inhibitor with a 300-fold potency improvement. Subsequently, by the application of a structure-guided design strategy, a successful hit-to-lead optimization was achieved and a number of Lp-PLA2 inhibitors with single-digit nanomolar potency were obtained. After preliminary evaluation of the properties of drug-likeness in vitro and in vivo, compound 37 stands out from this congeneric series of inhibitors for good inhibitory activity and favorable oral bioavailability in male Sprague-Dawley rats, providing a quality candidate for further development. The present study thus clearly demonstrates the power and advantage of integrally employing fragment screening, crystal structures determination, virtual screening, and medicinal chemistry in an efficient lead discovery project, providing a good example for structure-based drug design.

Performance of a Drift Chamber Candidate for a Cosmic Muon Tomography System

NASA Astrophysics Data System (ADS)

Anghel, V.; Armitage, J.; Botte, J.; Boudjemline, K.; Bueno, J.; Bryman, D.; Charles, E.; Cousins, T.; Drouin, P.-L.; Erlandson, A.; Gallant, G.; Jewett, C.; Jonkmans, G.; Liu, Z.; Noel, S.; Oakham, G.; Stocki, T. J.; Thompson, M.; Waller, D.

2011-12-01

In the last decade, many groups around the world have been exploring different ways to probe transport containers which may contain illicit Special Nuclear Materials such as uranium. The muon tomography technique has been proposed as a cost effective system with an acceptable accuracy. A group of Canadian institutions (see above), funded by Defence Research and Development Canada, is testing different technologies to track the cosmic muons. One candidate is the single wire Drift Chamber. With the capability of a 2D impact position measurement, two detectors will be placed above and two below the object to be probed. In order to achieve a good 3D image quality of the cargo content, a good angular resolution is required. The simulation showed that 1mrad was required implying the spatial resolution of the trackers must be in the range of 1 to 2 mm for 1 m separation. A tracking system using three prototypes has been built and tested. The spatial resolution obtained is 1.7 mm perpendicular to the wire and 3 mm along the wire.

E-learning in radiology: an Italian multicentre experience.

PubMed

Carriero, A; Bonomo, L; Calliada, F; Campioni, P; Colosimo, C; Cotroneo, A; Cova, M; Ettorre, G C; Fugazzola, C; Garlaschi, G; Macarini, L; Mascalchi, M; Meloni, G B; Midiri, M; Mucelli, R Pozzi; Rossi, C; Sironi, S; Torricelli, P; Beomonte, B Zobel; Zompatori, M; Zuiani, C

2012-12-01

The aim of this study was to design, deliver and evaluate an e-learning teaching programme for post-graduate radiodiagnostics training that would involve various post-graduate schools throughout Italy. All of the Directors of Italian post-graduate schools of radiodiagnostics were sent an e-mail on 27 September 2010 informing them of our willingness to set up an e-learning project for the academic year 2010-2011 in the form of single-subject teaching seminars. The proposed subjects were the semeiotics of the various organs and apparatuses in the context of "Urgent/Emergency Pathology". After having received registrations, a calendar of lessons was planned to be held between 10 November 2010 and 12 October 2011. The validity of the project was tested by means of a multiple-choice questionnaire covering the technical and didactic quality of the entire project, to be completed by the students. Fifty-one percent of the universities in Italy participated in the project: Trieste, Udine, Verona, Milan-Bicocca, Novara, Varese, Genoa, Sassari, Rome Campus, the Catholic University of Rome, Chieti, Foggia, Catania, Modena, Florence, Palermo, Bologna, Pavia, Parma and Ferrara. The lessons were attended by a total of 10,261 post-graduate medical students, for an average of 513.1 students per lesson. Seventy percent of the students judged the didactic content "excellent", 25% "good", and 5% "satisfactory"; none said it was unsatisfactory. In terms of visual quality (particularly the details of the radiological images proposed in the form of slides and/or video clips), 73% judged it "excellent", 20% "good", 6% "satisfactory", and 1% "poor". The audio quality was judged "excellent" by 71%, "good" by 22%, "satisfactory" by 6% and "poor" by 1%. In relation to judgement of audio and video quality, it has to be underlined that this was greatly affected by the hardware/software configuration and the band speed and technology of the Internet connection. Technological evolution is overcoming all barriers, and technology is also having a positive impact on the approach to teaching. Our multicentre teaching experience merits the following considerations: the quality of the teaching product was certified by the students' judgements of its didactic content and the quality of reception; the economic cost of the teaching had a minimal impact on the post-graduate schools (€ 18 per lesson). In terms of breaking down national barriers, it is to be hoped that the coordination and integration of diagnostic imaging e-learning projects, with the participation of post-graduate schools in different European countries, can be developed not only in a spirit of "cultural sharing" and the exchange of teaching experiences. Copyright © 2012 Elsevier Ireland Ltd. All rights reserved.

QUALITY OF LIFE AFTER VERTICAL GASTRECTOMY EVALUATED BY THE BAROS QUESTIONNAIRE

PubMed Central

VARGAS, Guilherme Pedroso; MENDES, Giselle Abigail; Pinto, Rinaldo Danesi

2017-01-01

ABSTRACT Background : The satisfactory outcome in the surgical treatment of obesity must include, in addition to weight loss, a significant change in the pre-existing comorbidities and in the quality of life of the patients. Aim : To evaluate the quality of life in the late postoperative period in patients that underwent videolaparoscopic sleeve gastrectomy. Methods : Was applied the questionnaire “Bariatric Analysis and Reporting Outcome System” (BAROS) in patients that underwent videolaparoscopic sleeve gastrectomy. Results : A total of 47 patients between 21-60 years old were evaluated. The total mean of the BMI before surgery was 43.06±5.87 kg/m². The average percentage of the reduction of excess weight after surgery was 85.46±23.6%. The score obtained by patients in the questionnaire about the improvement in the quality of life showed excellent (36.17%), very good (40.43%), good (21.28%) and reasonable (2.13%) results. There was clinical improvement after surgery in all comorbidities investigated. Conclusion : BAROS showed excellent results in 36.17%, very good in 40.43%, good in 21.28% and reasonable in 2.13%. The weight loss was critical to improve the quality of life and offered the resolution or clinical improvement in all of the investigated comorbidities. PMID:29340547

Development of the information model for consumer assessment of key quality indicators by goods labelling

NASA Astrophysics Data System (ADS)

Koshkina, S.; Ostrinskaya, L.

2018-04-01

An information model for “key” quality indicators of goods has been developed. This model is based on the assessment of f standardization existing state and the product labeling quality. According to the authors’ opinion, the proposed “key” indicators are the most significant for purchasing decision making. Customers will be able to use this model through their mobile technical devices. The developed model allows to decompose existing processes in data flows and to reveal the levels of possible architectural solutions. In-depth analysis of the presented information model decomposition levels will allow determining the stages of its improvement and to reveal additional indicators of the goods quality that are of interest to customers in the further research. Examining the architectural solutions for the customer’s information environment functioning when integrating existing databases will allow us to determine the boundaries of the model flexibility and customizability.

Metabolic profiling of Angelica acutiloba roots utilizing gas chromatography-time-of-flight-mass spectrometry for quality assessment based on cultivation area and cultivar via multivariate pattern recognition.

PubMed

Tianniam, Sukanda; Tarachiwin, Lucksanaporn; Bamba, Takeshi; Kobayashi, Akio; Fukusaki, Eiichiro

2008-06-01

Gas chromatography time-of-flight mass spectrometry was applied to elucidate the profiling of primary metabolites and to evaluate the differences between quality differences in Angelica acutiloba (or Yamato-toki) roots through the utilization of multivariate pattern recognition-principal component analysis (PCA). Twenty-two metabolites consisting of sugars, amino and organic acids were identified. PCA analysis successfully discriminated the good, the moderate and the bad quality Yamato-toki roots in accordance to their cultivation areas. The results signified two reducing sugars, fructose and glucose being the most accumulated in the bad quality, whereas higher quantity of phosphoric acid, proline, malic acid and citric acid were found in the good and the moderate quality toki roots. PCA was also effective in discriminating samples derive from different cultivars. Yamato-toki roots with the moderate quality were compared by means of PCA, and the results illustrated good discrimination which was influenced most by malic acid. Overall, this study demonstrated that metabolomics technique is accurate and efficient in determining the quality differences in Yamato-toki roots, and has a potential to be a superior and suitable method to assess the quality of this medicinal plant.

Approaches to Quality Risk Management When Using Single-Use Systems in the Manufacture of Biologics.

PubMed

Ishii-Watabe, Akiko; Hirose, Akihiko; Katori, Noriko; Hashii, Norikata; Arai, Susumu; Awatsu, Hirotoshi; Eiza, Akira; Hara, Yoshiaki; Hattori, Hideshi; Inoue, Tomomi; Isono, Tetsuya; Iwakura, Masahiro; Kajihara, Daisuke; Kasahara, Nobuo; Matsuda, Hiroyuki; Murakami, Sei; Nakagawa, Taishiro; Okumura, Takehiro; Omasa, Takeshi; Takuma, Shinya; Terashima, Iyo; Tsukahara, Masayoshi; Tsutsui, Maiko; Yano, Takahiro; Kawasaki, Nana

2015-10-01

Biologics manufacturing technology has made great progress in the last decade. One of the most promising new technologies is the single-use system, which has improved the efficiency of biologics manufacturing processes. To ensure safety of biologics when employing such single-use systems in the manufacturing process, various issues need to be considered including possible extractables/leachables and particles arising from the components used in single-use systems. Japanese pharmaceutical manufacturers, together with single-use suppliers, members of the academia and regulatory authorities have discussed the risks of using single-use systems and established control strategies for the quality assurance of biologics. In this study, we describe approaches for quality risk management when employing single-use systems in the manufacturing of biologics. We consider the potential impact of impurities related to single-use components on drug safety and the potential impact of the single-use system on other critical quality attributes as well as the stable supply of biologics. We also suggest a risk-mitigating strategy combining multiple control methods which includes the selection of appropriate single-use components, their inspections upon receipt and before releasing for use and qualification of single-use systems. Communication between suppliers of single-use systems and the users, as well as change controls in the facilities both of suppliers and users, are also important in risk-mitigating strategies. Implementing these control strategies can mitigate the risks attributed to the use of single-use systems. This study will be useful in promoting the development of biologics as well as in ensuring their safety, quality and stable supply.

GaSe and GaTe anisotropic layered semiconductors for radiation detectors

NASA Astrophysics Data System (ADS)

Mandal, Krishna C.; Choi, Michael; Kang, Sung Hoon; Rauh, R. David; Wei, Jiuan; Zhang, Hui; Zheng, Lili; Cui, Y.; Groza, M.; Burger, A.

2007-09-01

High quality detector grade GaSe and GaTe single crystals have been grown by a modified vertical Bridgman technique using high purity Ga (7N) and in-house zone refined (ZR) precursor materials (Se and Te). A state-of-the-art computer model, MASTRAPP, is used to model heat and mass transfer in the Bridgman growth system and to predict the stress distribution in the as-grown crystals. The model accounts for heat transfer in the multiphase system, convection in the melt, and interface dynamics. The crystals harvested from ingots of 8-10 cm length and 2.5 cm diameter, have been characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), Raman spectroscopy, low temperature photoluminescence (PL), atomic force microscopy (AFM), and optical absorption/transmission measurements. Single element devices up to 1 cm2 in area have been fabricated from the crystals and tested as radiation detectors by measuring current-voltage (I-V) characteristics and pulse height spectra using 241Am source. The crystals have shown high promise as nuclear detectors with their high dark resistivity (>=10 9 Ω .cm), good charge transport properties (μτ e ~ 1.4x10 -5 cm2/V and μτ h ~ 1.5x10 -5 cm2/V), and relatively good energy resolution (~4% energy resolution at 60 keV). Details of numerical modeling and simulation, detector fabrication, and testing using a 241Am energy source (60 keV) is presented in this paper.

Factors associated with the use and quality of antenatal care in Nepal: a population-based study using the demographic and health survey data.

PubMed

Joshi, Chandni; Torvaldsen, Siranda; Hodgson, Ray; Hayen, Andrew

2014-03-03

Good quality antenatal care (ANC) reduces maternal and neonatal mortality and improves health outcomes, particularly in low-income countries. Quality of ANC is measured by three dimensions: number of visits, timing of initiation of care and inclusion of all recommended components of care. Although some studies report on predictors of the first two indicators, no studies on the third indicator, which measures quality of ANC received, have been conducted in Nepal. Nepal follows the World Health Organization's recommendations of initiation of ANC within the first four months of pregnancy and at least four ANC visits during the course of an uncomplicated pregnancy. This study aimed to identify factors associated with 1) attendance at four or more ANC visits and 2) receipt of good quality ANC. Data from Nepal Demographic and Health Survey 2011 were analysed for 4,079 mothers. Good quality ANC was defined as that which included all seven recommended components: blood pressure measurement; urine tests for detecting bacteriuria and proteinuria; blood tests for syphilis and anaemia; and provision of iron supplementation, intestinal parasite drugs, tetanus toxoid injections and health education. Half the women had four or more ANC visits and 85% had at least one visit. Health education, iron supplementation, blood pressure measurement and tetanus toxoid were the more commonly received components of ANC. Older age, higher parity, and higher levels of education and household economic status of the women were predictors of both attendance at four or more visits and receipt of good quality ANC. Women who did not smoke, had a say in decision-making, whose husbands had higher levels of education and were involved in occupations other than agriculture were more likely to attend four or more visits. Other predictors of women's receipt of good quality ANC were receiving their ANC from a skilled provider, in a hospital, living in an urban area and being exposed to general media. Continued efforts at improving access to quality ANC in Nepal are required. In the short term, less educated women from socioeconomically disadvantaged households require targeting. Long-term improvements require a focus on improving female education.

[Quality assurance of emergency medical work].

PubMed

Sunde, H G

1995-03-30

Patients attending a casualty department often have diseases or injuries needing urgent medical attention. Early and correct diagnosis and treatment may be of major importance for the medical outcome. The continuity of staff is often low, with many doctors and nurses working part time. This may represent a threat to the quality of the medical work. Quality assurance at a casualty department through good training, introduction of written rules, a good flow of information to the staff and local licensing of doctors are factors which can assure that the quality of the medical service remains the best. This paper presents the work done at The Tromsø Municipal Casualty Department to assure the quality of the medical service to the population.

High quality factor single-crystal diamond mechanical resonators

NASA Astrophysics Data System (ADS)

Ovartchaiyapong, P.; Pascal, L. M. A.; Myers, B. A.; Lauria, P.; Bleszynski Jayich, A. C.

2012-10-01

Single-crystal diamond is a promising material for microelectromechanical systems (MEMs) because of its low mechanical loss, compatibility with extreme environments, and built-in interface to high-quality spin centers. But its use has been limited by challenges in processing and growth. We demonstrate a wafer bonding-based technique to form diamond on insulator, from which we make single-crystal diamond micromechanical resonators with mechanical quality factors as high as 338 000 at room temperature. Variable temperature measurements down to 10 K reveal a nonmonotonic dependence of quality factor on temperature. These resonators enable integration of single-crystal diamond into MEMs technology for classical and quantum applications.

Good Health Habits: Quality Education Program Study. Booklet 6 (Description) and Booklet 6-A (Needs Assessment).

ERIC Educational Resources Information Center

Bucks County Public Schools, Doylestown, PA.

Categories of effective and ineffective behavior in regard to Goal Six of the Quality Education Program (regarding good health habits) are listed. Both the rationales for areas of effective student behavior and the categories of teacher strategies are also included. (See TM 001 375 for project description.) (MS)

The Promise of Pre-K: Expanding Quality Preschool in Cincinnati. Education/Childcare

ERIC Educational Resources Information Center

Shields, Michael

2016-01-01

Quality preschool improves children's educational outcomes into the elementary grades, and good programs with wraparound childcare anchor family financial stability by enabling parents to work. Yet, too few Cincinnati children have access to a good preschool or any preschool at all. A levy on this November's ballot seeks to change that by adding a…

Hospice in Assisted Living: Promoting Good Quality Care at End of Life

ERIC Educational Resources Information Center

Cartwright, Juliana C.; Miller, Lois; Volpin, Miriam

2009-01-01

Purpose: The purpose of this study was to describe good quality care at the end of life (EOL) for hospice-enrolled residents in assisted living facilities (ALFs). Design and Methods: A qualitative descriptive design was used to obtain detailed descriptions of EOL care provided by ALF medication aides, caregivers, nurses, and hospice nurses in…

Qualities of a Psychiatric Mentor: A Quantitative Singaporean Survey

ERIC Educational Resources Information Center

Tor, Phern-Chern; Goh, Lee-Gan; Ang, Yong-Guan; Lim, Leslie; Winslow, Rasaiah-Munidasa; Ng, Beng-Yeong; Wong, Sze-Tai; Ng, Tse-Pin; Kia, Ee-Heok

2011-01-01

Objective: Psychiatric mentors are an important part of the new, seamless training program in Singapore. There is a need to assess the qualities of a good psychiatric mentor vis-a-vis those of a good psychiatrist. Method: An anonymous survey was sent out to all psychiatry trainees and psychiatrists in Singapore to assess quantitatively the…

Middle Level Managers' Quality of Leadership and Good Governance, and Organizational Performance of Wolaita Sodo University

ERIC Educational Resources Information Center

Shibru, Sintayehu; Bibiso, Mesfin; Ousman, Kedir

2017-01-01

The purpose of this study was to investigate the relationship between middle level managers' quality of leadership and good governance, and organization performance of Wolaita Sodo University. The study employed descriptive survey method and used quantitative approach. College/school Deans, Department heads and Coordinators were source of data.…

Improved knee biomechanics among patients reporting a good outcome in knee-related quality of life one year after total knee arthroplasty.

PubMed

Naili, Josefine E; Wretenberg, Per; Lindgren, Viktor; Iversen, Maura D; Hedström, Margareta; Broström, Eva W

2017-03-21

It is not well understood why one in five patients report poor outcomes following knee arthroplasty. This study evaluated changes in knee biomechanics, and perceived pain among patients reporting either a good or a poor outcome in knee-related quality of life after total knee arthroplasty. Twenty-eight patients (mean age 66 (SD 7) years) were included in this prospective study. Within one month of knee arthroplasty and one year after surgery, patients underwent three-dimensional (3D) gait analysis, completed the Knee Injury and Osteoarthritis Outcome Score (KOOS), and rated perceived pain using a visual analogue scale. A "good outcome" was defined as a change greater than the minimally detectable change in the KOOS knee-related quality of life, and a "poor outcome" was defined as change below the minimally detectable change. Nineteen patients (68%) were classified as having a good outcome. Groups were analyzed separately and knee biomechanics were compared using a two-way repeated measures ANOVA. Differences in pain between groups were evaluated using Mann Whitney U test. Patients classified as having a good outcome improved significantly in most knee gait biomechanical outcomes including increased knee flexion-extension range, reduced peak varus angle, increased peak flexion moment, and reduced peak valgus moment. The good outcome group also displayed a significant increase in walking speed, a reduction (normalization) of stance phase duration (% of gait cycle) and increased passive knee extension. Whereas, the only change in knee biomechanics, one year after surgery, for patients classified as having a poor outcome was a significant reduction in peak varus angle. No differences in pain postoperatively were found between groups. Patients reporting a good outcome in knee-related quality of life improved in knee biomechanics during gait, while patients reporting a poor outcome, despite similar reduction in pain, remained unchanged in knee biomechanics one year after total knee arthroplasty. With regards to surgeon-controlled biomechanical factors, surgery may most successfully address frontal plane knee alignment. However, achieving a good outcome in patient-reported knee-related quality of life may be related to dynamic improvements in the sagittal plane.

Influence of habitat quality, population size, patch size, and connectivity on patch-occupancy dynamics of the middle spotted woodpecker.

PubMed

Robles, Hugo; Ciudad, Carlos

2012-04-01

Despite extensive research on the effects of habitat fragmentation, the ecological mechanisms underlying colonization and extinction processes are poorly known, but knowledge of these mechanisms is essential to understanding the distribution and persistence of populations in fragmented habitats. We examined these mechanisms through multiseason occupancy models that elucidated patch-occupancy dynamics of Middle Spotted Woodpeckers (Dendrocopos medius) in northwestern Spain. The number of occupied patches was relatively stable from 2000 to 2010 (15-24% of 101 patches occupied every year) because extinction was balanced by recolonization. Larger and higher quality patches (i.e., higher density of oaks >37 cm dbh [diameter at breast height]) were more likely to be occupied. Habitat quality (i.e., density of large oaks) explained more variation in patch colonization and extinction than did patch size and connectivity, which were both weakly associated with probabilities of turnover. Patches of higher quality were more likely to be colonized than patches of lower quality. Populations in high-quality patches were less likely to become extinct. In addition, extinction in a patch was strongly associated with local population size but not with patch size, which means the latter may not be a good surrogate of population size in assessments of extinction probability. Our results suggest that habitat quality may be a primary driver of patch-occupancy dynamics and may increase the accuracy of models of population survival. We encourage comparisons of competing models that assess occupancy, colonization, and extinction probabilities in a single analytical framework (e.g., dynamic occupancy models) so as to shed light on the association of habitat quality and patch geometry with colonization and extinction processes in different settings and species. ©2012 Society for Conservation Biology.

Developing a Water Quality Index (WQI) for an Irrigation Dam

PubMed Central

De La Mora-Orozco, Celia; Flores-Lopez, Hugo; Rubio-Arias, Hector; Chavez-Duran, Alvaro; Ochoa-Rivero, Jesus

2017-01-01

Pollution levels have been increasing in water ecosystems worldwide. A water quality index (WQI) is an available tool to approximate the quality of water and facilitate the work of decision-makers by grouping and analyzing numerous parameters with a single numerical classification system. The objective of this study was to develop a WQI for a dam used for irrigation of about 5000 ha of agricultural land. The dam, La Vega, is located in Teuchitlan, Jalisco, Mexico. Seven sites were selected for water sampling and samples were collected in March, June, July, September, and December 2014 in an initial effort to develop a WQI for the dam. The WQI methodology, which was recommended by the Mexican National Water Commission (CNA), was used. The parameters employed to calculate the WQI were pH, electrical conductivity (EC), dissolved oxygen (DO), total dissolved solids (TDS), total hardness (TH), alkalinity (Alk), total phosphorous (TP), Cl−, NO3, SO4, Ca, Mg, K, B, As, Cu, and Zn. No significant differences in WQI values were found among the seven sampling sites along the dam. However, seasonal differences in WQI were noted. In March and June, water quality was categorized as poor. By July and September, water quality was classified as medium to good. Quality then decreased, and by December water quality was classified as medium to poor. In conclusion, water treatment must be applied before waters from La Vega dam reservoir can be used for irrigation or other purposes. It is recommended that the water quality at La Vega dam is continually monitored for several years in order to confirm the findings of this short-term study. PMID:28468230

An association between diet quality index for Koreans (DQI-K) and total mortality in Health Examinees Gem (HEXA-G) study.

PubMed

Lim, Jiyeon; Lee, Yunhee; Shin, Sangah; Lee, Hwi-Won; Kim, Claire E; Lee, Jong-Koo; Lee, Sang-Ah; Kang, Daehee

2018-06-01

Diet quality scores or indices, based on dietary guidelines, are used to summarize dietary intake into a single numeric variable. The aim of this study was to examine the association between the modified diet quality index for Koreans (DQI-K) and mortality among Health Examinees-Gem (HEXA-G) study participants. The DQI-K was modified from the original diet quality index. A total of 134,547 participants (45,207 men and 89,340 women) from the HEXA-G study (2004 and 2013) were included. The DQI-K is based on eight components: 1) daily protein intake, 2) percent of energy from fat, 3) percent of energy from saturated fat, 4) daily cholesterol intake, 5) daily whole-grain intake, 6) daily fruit intake, 7) daily vegetable intake, and 8) daily sodium intake. The association between all-cause mortality and the DQI-K was examined using Cox proportional hazard regression models. Hazard ratios and confidence intervals were estimated after adjusting for age, gender, income, smoking status, alcohol drinking, body mass index, and total energy intake. The total DQI-K score was calculated by summing the scores of the eight components (range 0-9). In the multivariable adjusted models, with good diet quality (score 0-4) as a reference, poor diet quality (score 5-9) was associated with an increased risk of all-cause mortality (hazard ratios = 1.23, 95% confidence intervals = 1.06-1.43). Moreover, a one-unit increase in DQI-K score resulted in a 6% higher mortality risk. A poor diet quality DQI-K score was associated with an increased risk of mortality. The DQI-K in the present study may be used to assess the diet quality of Korean adults.

TU-FG-201-10: Quality Management of Accelerated Partial Breast Irradiation (APBI) Plans

DOE Office of Scientific and Technical Information (OSTI.GOV)

Ji, H; Lorio, V; Cernica, G

2016-06-15

Purpose: Since 2008, over 700 patients received high dose rate (HDR) APBI treatment at Virginia Hospital Center. The complexity involved in the planning process demonstrated a broad variation between patient geometry across all applicators, in relation to anatomical regions of interest. A quality management program instituting various metrics was implemented in March 2013 with the goal of ensuring an optimal plan is achieved for each patient. Methods: For each plan, an in-house complexity index, geometric conformity index, and plan quality index were defined. These indices were obtained for all patients treated. For patients treated after the implementation, the conformity indexmore » and quality index were maximized while other dosimetric limits, such as maximum skin and rib doses, were strictly kept. Subsequently, all evaluation parameters and applicator information were placed in a database for cross-evaluation with similar complexity. Results: Both the conformity and quality indices show good correlation with the complexity index. They decrease as complexity increases for all applicators. Multi lumen type balloon applicators demonstrate a minimal advantage over single lumen applicators in increasingly complex patient geometries, as compared to SAVI applicators which showed considerably greater advantage in these circumstances. After the implementation of the in-house planning protocol, there is a direct improvement of quality for SAVI plans. Conclusion: Due to their interstitial nature, SAVI devices show a better conformity in comparison to balloon-based devices regardless of the number of lumens, especially in complex cases. The quality management program focuses on optimizing indices by utilizing prior planning knowledge based on complexity levels. The database of indices assists in decision making and has subsequently aided in balancing the experience level among planners. This approach has made APBI planning more robust for patient care, with a measurable improvement in the plan quality.« less

"You must eat the salad because it is nutritious". Argumentative strategies adopted by parents and children in food-related discussions at mealtimes.

PubMed

Bova, Antonio; Arcidiacono, Francesco

2014-02-01

At mealtimes, the evaluation of the appropriate (or not appropriate) behavior concerning the food is often assumed as a topic of discourse. The aim of this study is to single out the argumentative strategies used by parents with their children and by children with their parents in order to convince the other party to eat or not to eat a certain food. Within a data corpus constituted by 30 video-recorded meals of 10 middle to upper-middle-class Swiss and Italian families, we selected a corpus of 77 argumentative discussions between parents and children arisen around a food-related issue. Data are presented through discursive excerpts of argumentative discussions that were found within the data corpus and analyzed through the pragma-dialectical model of critical discussion. The results of this study show that the feeding practices in families with young children during mealtimes are argumentatively co-constructed by participants. In most cases parents put forward arguments based on the quality (e.g., very good, nutritious, salty, or not good) and quantity (e.g., too little, quite enough, or too much) of food to convince their children to eat. Similarly, children put forward arguments based on the quality and quantity of food to convince their parents to change their standpoint, although their view on the issue is the opposite of that of their parents. Copyright © 2013 Elsevier Ltd. All rights reserved.

Solid oxide fuel cells with apatite-type lanthanum silicate-based electrolyte films deposited by radio frequency magnetron sputtering

NASA Astrophysics Data System (ADS)

Liu, Yi-Xin; Wang, Sea-Fue; Hsu, Yung-Fu; Wang, Chi-Hua

2018-03-01

In this study, solid oxide fuel cells (SOFCs) containing high-quality apatite-type magnesium doped lanthanum silicate-based electrolyte films (LSMO) deposited by RF magnetron sputtering are successfully fabricated. The LSMO film deposited at an Ar:O2 ratio of 6:4 on an anode supported NiO/Sm0.2Ce0·8O2-δ (SDC) substrate followed by post-annealing at 1000 °C reveals a uniform and dense c-axis oriented polycrystalline structure, which is well adhered to the anode substrate. A composite SDC/La0·6Sr0·4Co0·2Fe0·8O3-δ cathode layer is subsequently screen-printed on the LSMO deposited anode substrate and fired. The SOFC fabricated with the LSMO film exhibits good mechanical integrity. The single cell with the LSMO layer of ≈2.8 μm thickness reports a total cell resistance of 1.156 and 0.163 Ωcm2, open circuit voltage of 1.051 and 0.982 V, and maximum power densities of 0.212 and 1.490 Wcm-2 at measurement temperatures of 700 and 850 °C, respectively, which are comparable or superior to those of previously reported SOFCs with yttria stabilized zirconia electrolyte films. The results of the present study demonstrate the feasibility of deposition of high-quality LSMO films by RF magnetron sputtering on NiO-SDC anode substrates for the fabrication of SOFCs with good cell performance.

Endorsing good quality assurance practices in molecular pathology: risks and recommendations for diagnostic laboratories and external quality assessment providers.

PubMed

Tembuyser, Lien; Dequeker, Elisabeth M C

2016-01-01

Quality assurance is an indispensable element in a molecular diagnostic laboratory. The ultimate goal is to warrant patient safety. Several risks that can compromise high quality procedures are at stake, from sample collection to the test performed by the laboratory, the reporting of test results to clinicians, and the organization of effective external quality assessment schemes. Quality assurance should therefore be safeguarded at each level and should imply a holistic multidisciplinary approach. This review aims to provide an overview of good quality assurance practices and discusses certain risks and recommendations to promote and improve quality assurance for both diagnostic laboratories and for external quality assessment providers. The number of molecular targets is continuously rising, and new technologies are evolving. As this poses challenges for clinical implementation and increases the demand for external quality assessment, the formation of an international association for improving quality assurance in molecular pathology is called for.

Structural relations of convenience food satisfaction and quality of life according to dietary style: Focusing on singles in metropolitan area of Korea

PubMed Central

Kim, Boram

2014-01-01

BACKGROUND/OBJECTIVES Although the issues of singles' dietary style and quality of life are becoming important due to the increasing number of singles with economic power, little research has been conducted to date on singles' use of convenience food and quality of life in relation to their dietary style. Thus, the present study intends to provide basic data to improve the quality of life by determining the current status of the use of convenience food and explicating its relationship with quality of life through analyzing the dietary lifestyles of the singles. SUBJECTS/METHODS The targets of this study were singles, identified as adults between the ages of 25 and 54, living alone, either legally or in actuality having no partner. A statistical analysis of 208 surveys from Seoul, respectively, was conducted using SPSS12.0 for Windows and SEM using AMOS 5.0 statistics package. RESULTS The convenience-oriented was shown to have a significant positive effect on convenience food satisfaction. HMR satisfaction was found to have a significant effect on positive psychological satisfaction and the convenience-oriented was found to have a significant negative effect on all aspects of quality of life satisfaction. CONCLUSIONS There must be persistent development of food industries considering the distinctive characteristics of the lives of singles in order to satisfy their needs and improve the quality of their lives. PMID:25324938

Quality of Life Theory I. The IQOL Theory: An Integrative Theory of the Global Quality of Life Concept

PubMed Central

Ventegodt, Soren; Merrick, Joav; Andersen, Niels Jorgen

2003-01-01

Quality of life (QOL) means a good life and we believe that a good life is the same as living a life with a high quality. This paper presents the theoretical and philosophical framework of the Danish Quality of Life Survey, and of the SEQOL, QOL5, and QOL1 questionnaires.The notion of a good life can be observed from subjective to the objective, where this spectrum incorporates a number of existing quality of life theories. We call this spectrum the integrative quality-of-life (IQOL) theory and discuss the following aspects in this paper: well being, satisfaction with life, happiness, meaning in life, the biological information system (“balance”), realizing life potential, fulfillment of needs, and objective factors.The philosophy of life outlined in this paper tries to measure the global quality of life with questions derived from the integrative theory of the quality of life. The IQOL theory is an overall theory or meta-theory encompassing eight more factual theories in a subjective-existential-objective spectrum. Other philosophies of life can stress other aspects of life, but by this notion of introducing such an existential depth into the health and social sciences, we believe to have taken a necessary step towards a new humility and respect for the richness and complexity of life. PMID:14570993

InGaAsP/InP laser development for single-mode, high-data-rate communications

NASA Technical Reports Server (NTRS)

Ladany, I.; Levin, E. R.; Magee, C. W.; Smith, R. T.

1981-01-01

Materials studies as well as general and specific device development were carried out in the InGaAsP system. A comparison was made of three standard methods of evaluating substrate quality by means of dislocation studies. A cause of reduced yield of good wafers, the pullover of melt from one bin to the next, has been analyzed. Difficulties with reproducible zinc acceptor doping have been traced to segregation of zinc in the In/Zn alloy used for the doping source. Using EBIC measurments, the pn junction was shown to drift in location depending on factors not always under control. An analysis of contact structures by SIMS showed that the depth to which the sintered Au/Zn contact penetrates into the structure is typically 0.13 microns, or well within the cap layer and out of the p-type cladding and thus not deleterious to laser prformance. The problem of single-mode laser development was investigated and it was shown to be related to the growth habit over four different possible substrate configurations. The fabrication of constricted double heterojunctions, mesa stripe buried heterostructures, and buried heterostructures was discussed, and measurements were presented on the device properties of single-mode buried heterostructure lasers. Results include single spectral line emission at 3 mW and a threshold current of 60 mA.

Effect of Alignment on Transport Properties of Carbon Nanotube/Metallic Junctions

NASA Technical Reports Server (NTRS)

Wincheski, Buzz; Namkung, Min; Smits, Jan; Williams, Phillip; Harvey, Robert

2003-01-01

Ballistic and spin coherent transport in single walled carbon nanotubes (SWCNT) are predicted to enable high sensitivity single-nanotube devices for strain and magnetic field sensing. Based upon these phenomena, electron beam lithography procedures have been developed to study the transport properties of purified HiPCO single walled carbon nanotubes for development into sensory materials for nondestructive evaluation. Purified nanotubes are dispersed in solvent suspension and then deposited on the device substrate before metallic contacts are defined and deposited through electron beam lithography. This procedure produces randomly dispersed ropes, typically 2 - 20 nm in diameter, of single walled carbon nanotubes. Transport and scanning probe microscopy studies have shown a good correlation between the junction resistance and tube density, alignment, and contact quality. In order to improve transport properties of the junctions a technique has been developed to align and concentrate nanotubes at specific locations on the substrate surface. Lithographic techniques are used to define local areas where high frequency electric fields are to be concentrated. Application of the fields while the substrate is exposed to nanotube-containing solution results in nanotube arrays aligned with the electric field lines. A second electron beam lithography layer is then used to deposit metallic contacts across the aligned tubes. Experimental measurements are presented showing the increased tube alignment and improvement in the transport properties of the junctions.

Synthesis, growth, structure, mechanical and optical properties of a new semi-organic 2-methyl imidazolium dihydrogen phosphate single crystal

DOE Office of Scientific and Technical Information (OSTI.GOV)

Nagapandiselvi, P., E-mail: nagapandiselvip@ssn.edu.in; Baby, C.; Gopalakrishnan, R.

2016-09-15

Highlights: • 2MIDP crystals were grown by slow evaporation solution growth technique. • Single crystal XRD revealed self-assembled supramolecular framework. • Z scan technique is employed for third order nonlinear optical susceptibility. • Structure-property correlation is established. - Abstract: A new semi-organic compound, 2-methyl imidazolium dihydrogen phosphate (2MIDP), was prepared and good quality single crystals of 2MIDP were grown by slow evaporation solution growth technique. Crystal structure elucidated using Single crystal XRD showed that 2MIDP crystallizes in monoclinic system with P2{sub 1}/c space group. FT-IR, UV-Vis-NIR, Fluorescence and FT-NMR spectra confirm the molecular structure of 2MIDP. The UV-Vis-NIR spectra establishedmore » the suitability of the compound for NLO applications. TG-DSC showed that 2MIDP is thermally stable up to 200 °C. Mechanical characteristics like hardness number (H{sub v}), stiffness constant (C{sub 11}), yield strength (σ{sub v}), fracture toughness (K{sub c}) and brittleness index (B{sub i}) were assessed using Vicker’s microhardness tester. Third order nonlinear optical properties determined from Z-scan measurement using femto and picosecond lasers showed two photon reverse saturable absorption. The enhancement of nonlinear optical properties in femto second laser, revealed the suitability of 2MIDP for optical limiting applications.« less

The reliability of the Glasgow Coma Scale: a systematic review.

PubMed

Reith, Florence C M; Van den Brande, Ruben; Synnot, Anneliese; Gruen, Russell; Maas, Andrew I R

2016-01-01

The Glasgow Coma Scale (GCS) provides a structured method for assessment of the level of consciousness. Its derived sum score is applied in research and adopted in intensive care unit scoring systems. Controversy exists on the reliability of the GCS. The aim of this systematic review was to summarize evidence on the reliability of the GCS. A literature search was undertaken in MEDLINE, EMBASE and CINAHL. Observational studies that assessed the reliability of the GCS, expressed by a statistical measure, were included. Methodological quality was evaluated with the consensus-based standards for the selection of health measurement instruments checklist and its influence on results considered. Reliability estimates were synthesized narratively. We identified 52 relevant studies that showed significant heterogeneity in the type of reliability estimates used, patients studied, setting and characteristics of observers. Methodological quality was good (n = 7), fair (n = 18) or poor (n = 27). In good quality studies, kappa values were ≥0.6 in 85%, and all intraclass correlation coefficients indicated excellent reliability. Poor quality studies showed lower reliability estimates. Reliability for the GCS components was higher than for the sum score. Factors that may influence reliability include education and training, the level of consciousness and type of stimuli used. Only 13% of studies were of good quality and inconsistency in reported reliability estimates was found. Although the reliability was adequate in good quality studies, further improvement is desirable. From a methodological perspective, the quality of reliability studies needs to be improved. From a clinical perspective, a renewed focus on training/education and standardization of assessment is required.

Assessment of groundwater quality: a fusion of geochemical and geophysical information via Bayesian neural networks.

PubMed

Maiti, Saumen; Erram, V C; Gupta, Gautam; Tiwari, Ram Krishna; Kulkarni, U D; Sangpal, R R

2013-04-01

Deplorable quality of groundwater arising from saltwater intrusion, natural leaching and anthropogenic activities is one of the major concerns for the society. Assessment of groundwater quality is, therefore, a primary objective of scientific research. Here, we propose an artificial neural network-based method set in a Bayesian neural network (BNN) framework and employ it to assess groundwater quality. The approach is based on analyzing 36 water samples and inverting up to 85 Schlumberger vertical electrical sounding data. We constructed a priori model by suitably parameterizing geochemical and geophysical data collected from the western part of India. The posterior model (post-inversion) was estimated using the BNN learning procedure and global hybrid Monte Carlo/Markov Chain Monte Carlo optimization scheme. By suitable parameterization of geochemical and geophysical parameters, we simulated 1,500 training samples, out of which 50 % samples were used for training and remaining 50 % were used for validation and testing. We show that the trained model is able to classify validation and test samples with 85 % and 80 % accuracy respectively. Based on cross-correlation analysis and Gibb's diagram of geochemical attributes, the groundwater qualities of the study area were classified into following three categories: "Very good", "Good", and "Unsuitable". The BNN model-based results suggest that groundwater quality falls mostly in the range of "Good" to "Very good" except for some places near the Arabian Sea. The new modeling results powered by uncertainty and statistical analyses would provide useful constrain, which could be utilized in monitoring and assessment of the groundwater quality.

Ozone - Current Air Quality Index

MedlinePlus

GO! Local Air Quality Conditions Zip Code: State : My Current Location Current AQI Forecast AQI Loop More Maps AQI: Good (0 - 50) ... resources for Hawaii residents and visitors more announcements Air Quality Basics Air Quality Index | Ozone | Particle Pollution | Smoke ...

The quality of life and satisfaction with life of women who are childless by choice.

PubMed

Bień, Agnieszka; Rzońca, Ewa; Iwanowicz-Palus, Grażyna; Lecyk, Urszula; Bojar, Iwona

2017-05-11

Objective. The study attempts to identify and analyze factors affecting the quality of life and satisfaction with life of women who are childless by choice. Materials and method. The research instruments used were: the WHOQOL-Bref questionnaire and the Satisfaction with Life Scale (SWLS), and author's own questionnaire. Results. A better overall quality of life, perception of own health and quality of life in all the specific domains analyzed was found among childless women living in cities, college/university-educated, and with a good or very good financial standing. Conclusions. A positive correlation was found between satisfaction with life and overall quality of life, general perceived health, and all quality of life domains. Higher satisfaction with life scores in childless women are correlated with a higher quality of life scores and better perceived health.

Anaerobic-aerobic treatment of purified terephthalic acid (PTA) effluent; a techno-economic alternative to two-stage aerobic process.

PubMed

Pophali, G R; Khan, R; Dhodapkar, R S; Nandy, T; Devotta, S

2007-12-01

This paper addresses the treatment of purified terephthalic acid (PTA) effluent using anaerobic and aerobic processes. Laboratory studies were carried out on flow proportionate composite wastewater generated from the manufacturing of PTA. An activated sludge process (ASP-two stage and single stage) and an upflow anaerobic fixed film fixed bed reactor (AFFFBR) were used, individually and in combination. The performance of a full-scale ETP under existing operating conditions was also studied. Full scale ETP studies revealed that the treatment of PTA effluent using a two-stage ASP alone does not meet treated effluent quality within the prescribed Indian Standards. The biomass produced in the two stage ASP was very viscous and fluffy and the sludge volume index (SVI) was very high (200-450 ml/g). However, pretreatment of PTA effluent using an upflow AFFFBR ensured substantial reduction in BOD (63%) and COD (62%) with recovery of biogas at 1.8-1.96 l/l effluent treated at a volumetric loading rate (VLR) 4-5 kg COD/m(3) d. The methane content in the biogas varied between 55% and 60%. The pretreated effluent from the upflow AFFFBR was then treated through a single stage ASP. The biomass produced in the ASP after anaerobic treatment had very good settlability (SVI: 75-90 ml/g) as compared to the two stage ASP and the treated effluent quality with respect to BOD, COD and SS was within the prescribed Indian Standards. The alternative treatment process comprising an upflow AFFFBR and a single stage ASP ensured net power saving of 257 kW and in addition generated 442 kW of power through the AFFFBR.

High performance batch production of LREBa 2Cu 3O y using novel thin film Nd-123 seed

NASA Astrophysics Data System (ADS)

Muralidhar, M.; Suzuki, K.; Fukumoto, Y.; Ishihara, A.; Tomita, M.

2011-11-01

A batch production for fabrication of LREBa2Cu3Oy (LRE: Sm, Gd, NEG) "LRE-123" pellets are developed in air and Ar-1% O2 using a novel thin film Nd-123 seeds grown on MgO crystals. The SEM and XRD results conformed that the quality and orientation of the seed crystals are excellent. On the other hand, new seeds can withstand temperatures >1100 °C, as a result, the cold seeding process was applied even to grow Sm-123 material in Air. The trapped field observed in the best 45 mm single-grain puck of Gd-123 was in the range of 1.35 T and 0.35 T at 77.3 K and 87.3 K, respectively. The average trapped field at 77.3 K in the 24 mm diameter NEG-123 samples batch lies between 0.9 and 1 T. The maximum trapped field of 1.2 T was recorded at the sample surface. Further, the maximum trapped field of 0.23 T at 77 K was recorded in a sample with 16 mm diameter of Sm-123 with 3 mol% BaO2 addition. As a result we made more then 130 single grain pucks within a couple of months. Taking advantage of the single grain batch processed material, we constructed self-made chilled levitation disk, which was used on the open day of railway technical research Institute. More then 150 children stood on the levitation disk and revel the experience of levitation. The present results prove that a high-performance good-quality class of LREBa2Cu3Oy material can be made by using a novel thin film Nd-123 seeds.

Forensic validation of the SNPforID 52-plex assay.

PubMed

Musgrave-Brown, Esther; Ballard, David; Balogh, Kinga; Bender, Klaus; Berger, Burkhard; Bogus, Magdalena; Børsting, Claus; Brion, María; Fondevila, Manuel; Harrison, Cheryl; Oguzturun, Ceylan; Parson, Walther; Phillips, Chris; Proff, Carsten; Ramos-Luis, Eva; Sanchez, Juan J; Sánchez Diz, Paula; Sobrino Rey, Bea; Stradmann-Bellinghausen, Beate; Thacker, Catherine; Carracedo, Angel; Morling, Niels; Scheithauer, Richard; Schneider, Peter M; Syndercombe Court, Denise

2007-06-01

The advantages of single nucleotide polymorphism (SNP) typing in forensic genetics are well known and include a wider choice of high-throughput typing platforms, lower mutation rates, and improved analysis of degraded samples. However, if SNPs are to become a realistic supplement to current short tandem repeat (STR) typing methods, they must be shown to successfully and reliably analyse the challenging samples commonly encountered in casework situations. The European SNPforID consortium, supported by the EU GROWTH programme, has developed a multiplex of 52 SNPs for forensic analysis, with the amplification of all 52 loci in a single reaction followed by two single base extension (SBE) reactions which are detected with capillary electrophoresis. In order to validate this assay, a variety of DNA extracts were chosen to represent problems such as low copy number and degradation that are commonly seen in forensic casework. A total of 40 extracts were used in the study, each of which was sent to two of the five participating laboratories for typing in duplicate or triplicate. Laboratories were instructed to carry out their analyses as if they were dealing with normal casework samples. Results were reported back to the coordinating laboratory and compared with those obtained from traditional STR typing of the same extracts using Powerplex 16 (Promega). These results indicate that, although the ability to successfully type good quality, low copy number extracts is lower, the 52-plex SNP assay performed better than STR typing on degraded samples, and also on samples that were both degraded and of limited quantity, suggesting that SNP analysis can provide advantages over STR analysis in forensically relevant circumstances. However, there were also additional problems arising from contamination and primer quality issues and these are discussed.

SU-F-T-615: Comparison of Plan Quality for Linac-Based Stereotactic Radiosurgery (SRS) Using Single- and Multi-Isocenter Techniques

DOE Office of Scientific and Technical Information (OSTI.GOV)

Chang, J; Dept of Radiation Oncology, NewYork Hospital/Weill Cornell Medical College, New York, NY; Wernicke, A

2016-06-15

Purpose: To compare the plan quality of linear accelerator (linac)-based stereotactic radiosurgery (SRS) using single-isocenter volumetric arc therapy (SI-VMAT), restricted single-isocenter dynamic-arc (RSI-DARC), and multi-isocenter DARC (MI-DARC) techniques. Methods: Fifteen SRS cases were randomly selected and re-planned using the SI-VMAT (Pinnacle), RSI-DARC (iPlanNet) and MI-DARC (iPlanNet). The number of planning target volumes (PTVs) for each plan ranged from 1 to 6. For SI-VMAT, a single isocenter and 3-4 VMAT beams are used for all PTVs, while for MI-DARC, each PTV has its own isocetner with 3 DARC beams. RSI-DARC uses one isocnter with 3-6 DARC beams to irradiate all PTVsmore » within 2.5-cm radius. Both SI-DARC and RSI-DARC plans were optimized manually. The prescription dose was 20 Gy to each PTV. The maximal dose was 25 Gy for RSI-DARC and MI-DARC, but could not be controlled for SI-VMAT due to the nature of VMAT planning. Plan quality indexes including PTV coverage, mean dose of PTV (PTVmean) and tissue (Tmean), V12Gy, conformity index (CI), and V10Gy/VPTV were calculated and compared. Results: Full PTV coverage was achieved for all three techniques. Using the MI-DARC plans as the gold standard, the PTVmean of the SI-VMAT plans was 12.5%±8.3% (mean±standard deviation) higher, in comparison to 0.7%±1.4% for the RSI-DARC plans. Similar trend was observed for other indexes including V12Gy (39.4%±27.3% vs. 9.3%±7.8%), Tmean (35.0%±26.8% vs. 2.8%±3.4%), and V10Gy/VPTV (42.2%±31.5% vs. 9.9%±8.2%). CI is comparable (6.2%±14.2% vs. 6.3%±7.2%). Assuming the treatment time is proportional to the number of isocenters, the reduction of the treatment time in comparison to MI-DARC was 70% for SI-VMAT and 42% for RSI-DARC. Conclusion: Although the SI-VMAT can save a considerable amount of treatment time, the plan indexes also significantly deviates from the gold standard, MI-DARC. RSI-DARC, on the other hand, provides a good compromise between the treatment time and plan quality.« less

Novel high-brightness fiber coupled diode laser device

NASA Astrophysics Data System (ADS)

Haag, Matthias; Köhler, Bernd; Biesenbach, Jens; Brand, Thomas

2007-02-01

High brightness becomes more and more important in diode laser applications for fiber laser pumping and materials processing. For OEM customers fiber coupled devices have great advantages over direct beam modules: the fiber exit is a standardized interface, beam guiding is easy with nearly unlimited flexibility. In addition to the transport function the fiber serves as homogenizer: the beam profile of the laser radiation emitted from a fiber is symmetrical with highly repeatable beam quality and pointing stability. However, efficient fiber coupling requires an adaption of the slow-axis beam quality to the fiber requirements. Diode laser systems based on standard 10mm bars usually employ beam transformation systems to rearrange the highly asymmetrical beam of the laser bar or laser stack. These beam transformation systems (prism arrays, lens arrays, fiber bundles etc.) are expensive and become inefficient with increasing complexity. This is especially true for high power devices with small fiber diameters. On the other hand, systems based on single emitters are claimed to have good potential in cost reduction. Brightness of the inevitable fiber bundles, though, is limited due to inherent fill-factor losses. At DILAS a novel diode laser device has been developed combining the advantages of diode bars and single emitters: high brightness at high reliability with single emitter cost structure. Heart of the device is a specially tailored laser bar (T-Bar), which epitaxial and lateral structure was designed such that only standard fast- and slow-axis collimator lenses are required to couple the beam into a 200μm fiber. Up to 30 of these T-Bars of one wavelength can be combined to reach a total of > 500W ex fiber in the first step. Going to a power level of today's single emitter diodes even 1kW ex 200μm fiber can be expected.

The discrimination of fish egg quality and viability by using Raman spectroscopy

NASA Astrophysics Data System (ADS)

Ishigaki, Mika; Sato, Hidetoshi

2014-03-01

Sexual reproductive body can be produced from a fertilized ovum. Once the ovum is fertilized with sperm, it runs through the cell division, differentiates to all kinds of cells, and goes to make a complete body. However, not all of them are viable and some of them stop to ontogenesis showing the developmental abnormality. In order to discriminate the egg quality, we apply Raman spectroscopy for fish egg. After the measurement, these Raman data are checked up with the information about the eggs can survive or not, and we examine what factors are important in egg components to distinguish between "good quality" and "not good quality". We present the results of assessment of egg quality, and investigate whether Raman spectroscopy can be used to a discriminate of egg quality.

Relationship between the practice of physical activity and quality of movement in adolescents: a screening tool using self-organizing maps.

PubMed

Herrero-Herrero, María; García-Massó, Xavier; Martínez-Corralo, Carlos; Prades-Piñón, Josep; Sanchis-Alfonso, Vicente

2017-09-01

The aim of this study was to determine whether the most physically active adolescents have better lower limb control. 31 high school students (12 males and 19 females) participated in this study. The Anterior Knee Pain Scale was used to find any cases of knee pain. Only subjects with high scores were selected, to exclude those with knee pain or lower limb injuries. Single Leg Squat and Tuck Jump Assessment were used to evaluate movements with two cameras in a two-dimensional assessment. The IPAQ Questionnaire was used to score the physical activity and to classify it into MET total, MET moderate activity, MET vigorous activity and MET walking. These scores were related to knee angle at landing, age and body mass index by self-organizing maps analysis. The subjects were classified into 4 clusters and the descriptive statistics of the different clusters were determined to find any differences. The subjects in cluster 3 were classified as those with the highest risk factors of suffering lower limb musculoskeletal disorders or knee pain, even though injuries do not only depend on quality of movement. Physical activity was not related to healthy movements during jump and single leg squat. Physical activity alone cannot be an indicator of good quality lower limb movement, as the knee valgus angle plays a determining role, as it could also depend on neuromuscular control and anatomical characteristics. The analytical method described in the study could be used by physical education teachers to detect potential risk factors for musculoskeletal problems in the lower limbs, especially in the knees.

Phenotypic and molecular characterization of a tomato (Solanum lycopersicum L.) F2 population segregation for improving shelf life.

PubMed

Yogendra, K N; Ramanjini Gowda, P H

2013-02-27

Breeding for better quality fruits is a major focus for tomatoes, which are continuously subjected to post-harvest losses. Several methods have been used to improve the fruit shelf life of tomatoes, including the use of ripening gene mutants of Solanum lycopersicum. We developed extended shelf-life tomato hybrids with better quality fruits using ripening mutants. Nine tomato crosses were developed using 3 fruit ripening gene mutants of S. lycopersicum [alcobaca (alc), non-ripening, and ripening inhibitor] and 3 agronomically superior Indian cultivars ('Sankranti', 'Vaibhav', and 'Pusaruby') with short shelf life. The hybrid progenies developed from alc x 'Vaibhav' had the highest extended shelf life (up to 40 days) compared with that of other varieties and hybrids. Further, the F(2) progenies of alc x 'Vaibhav' were evaluated for fruit quality traits and yield parameters. A wide range of genetic variability was observed in shelf life (5-106 days) and fruit firmness (0.55-10.65 lbs/cm(2)). The potential polymorphic simple sequence repeat markers underlying shelf life traits were identified in an F(2) mapping population. The marker association with fruit quality traits and yield was confirmed with single-marker analysis and composite interval mapping. The genetic parameters analyzed in the parents and F(1) and F(2) populations indicated that the cross between the cultivar 'Vaibhav' and ripening gene mutant alc yielded fruit with long shelf life and good quality.

The aerospace plane design challenge: Credible computational fluid dynamics results

NASA Technical Reports Server (NTRS)

Mehta, Unmeel B.

1990-01-01

Computational fluid dynamics (CFD) is necessary in the design processes of all current aerospace plane programs. Single-stage-to-orbit (STTO) aerospace planes with air-breathing supersonic combustion are going to be largely designed by means of CFD. The challenge of the aerospace plane design is to provide credible CFD results to work from, to assess the risk associated with the use of those results, and to certify CFD codes that produce credible results. To establish the credibility of CFD results used in design, the following topics are discussed: CFD validation vis-a-vis measurable fluid dynamics (MFD) validation; responsibility for credibility; credibility requirement; and a guide for establishing credibility. Quantification of CFD uncertainties helps to assess success risk and safety risks, and the development of CFD as a design tool requires code certification. This challenge is managed by designing the designers to use CFD effectively, by ensuring quality control, and by balancing the design process. For designing the designers, the following topics are discussed: how CFD design technology is developed; the reasons Japanese companies, by and large, produce goods of higher quality than the U.S. counterparts; teamwork as a new way of doing business; and how ideas, quality, and teaming can be brought together. Quality control for reducing the loss imparted to the society begins with the quality of the CFD results used in the design process, and balancing the design process means using a judicious balance of CFD and MFD.

Untrained consumer assessment of the eating quality of European beef: 2. Demographic factors have only minor effects on consumer scores and willingness to pay.

PubMed

Bonny, S P F; Gardner, G E; Pethick, D W; Allen, P; Legrand, I; Wierzbicki, J; Farmer, L J; Polkinghorne, R J; Hocquette, J-F

2017-08-01

The beef industry must become more responsive to the changing market place and consumer demands. An essential part of this is quantifying a consumer's perception of the eating quality of beef and their willingness to pay for that quality, across a broad range of demographics. Over 19 000 consumers from Northern Ireland, Poland, Ireland and France each tasted seven beef samples and scored them for tenderness, juiciness, flavour liking and overall liking. These scores were weighted and combined to create a fifth score, termed the Meat Quality 4 score (MQ4) (0.3×tenderness, 0.1×juiciness, 0.3×flavour liking and 0.3×overall liking). They also allocated the beef samples into one of four quality grades that best described the sample; unsatisfactory, good-every-day, better-than-every-day or premium. After the completion of the tasting panel, consumers were then asked to detail, in their own currency, their willingness to pay for these four categories which was subsequently converted to a proportion relative to the good-every-day category (P-WTP). Consumers also answered a short demographic questionnaire. The four sensory scores, the MQ4 score and the P-WTP were analysed separately, as dependant variables in linear mixed effects models. The answers from the demographic questionnaire were included in the model as fixed effects. Overall, there were only small differences in consumer scores and P-WTP between demographic groups. Consumers who preferred their beef cooked medium or well-done scored beef higher, except in Poland, where the opposite trend was found. This may be because Polish consumers were more likely to prefer their beef cooked well-done, but samples were cooked medium for this group. There was a small positive relationship with the importance of beef in the diet, increasing sensory scores by about 4% in Poland and Northern Ireland. Men also scored beef about 2% higher than women for most sensory scores in most countries. In most countries, consumers were willing to pay between 150 and 200% more for premium beef, and there was a 50% penalty in value for unsatisfactory beef. After quality grade, by far the greatest influence on P-WTP was country of origin. Consumer age also had a small negative relationship with P-WTP. The results indicate that a single quality score could reliably describe the eating quality experienced by all consumers. In addition, if reliable quality information is delivered to consumers they will pay more for better quality beef, which would add value to the beef industry and encourage improvements in quality.

Self-assessment and goal-setting is associated with an improvement in interviewing skills.

PubMed

Hanley, Kathleen; Zabar, Sondra; Charap, Joseph; Nicholson, Joseph; Disney, Lindsey; Kalet, Adina; Gillespie, Colleen

2014-01-01

Purpose Describe the relationship between medical students' self-assessment and goal-setting (SAGS) skills and development of interviewing skills during the first-year doctoring course. Method 157 first-year medical students completed three two-case standardized patient (SP) interviews. After each of the first two, students viewed videotapes of their interview, completed a SAGS worksheet, and reviewed a selected tape segment in a seminar. SAGS was categorized into good and poor quality and interviewing skills were rated by trained raters. Results SAGS improved over time (37% good week 1 vs. 61% good week 10). Baseline SAGS and interviewing skills were not associated. Initial SAGS quality was associated with change in interviewing skills - those with poor-quality SAGS demonstrated a decrease and those with good-quality SAGS demonstrated an increase in scores by 17 weeks (ANOVA F=4.16, p=0.024). For students whose SAGS skills were good at both week 1 and 10, interviewing skills declined in weeks 1-10 and then increased significantly at week 17. For those whose SAGS remained 'poor' in weeks 1-10, interviewing skills declined in weeks 10-17. Conclusions In general, the quality of students' SAGS improved over time. Poor baseline SAGS skills and failure to improve were associated with a decrease in interviewing skills at 17 weeks. For students with better SAGS, interviewing skills increased at week 17. Improvement in SAGS skills was not associated with improved interviewing skills. Understanding structured self-assessment skills helps identify student characteristics that influence progressive mastery of communication skills and therefore may inform curriculum and remediation tailoring.

Self-assessment and goal-setting is associated with an improvement in interviewing skills.

PubMed

Hanley, Kathleen; Zabar, Sondra; Charap, Joseph; Nicholson, Joseph; Disney, Lindsey; Kalet, Adina; Gillespie, Colleen

2014-01-01

Describe the relationship between medical students' self-assessment and goal-setting (SAGS) skills and development of interviewing skills during the first-year doctoring course. 157 first-year medical students completed three two-case standardized patient (SP) interviews. After each of the first two, students viewed videotapes of their interview, completed a SAGS worksheet, and reviewed a selected tape segment in a seminar. SAGS was categorized into good and poor quality and interviewing skills were rated by trained raters. SAGS improved over time (37% good week 1 vs. 61% good week 10). Baseline SAGS and interviewing skills were not associated. Initial SAGS quality was associated with change in interviewing skills - those with poor-quality SAGS demonstrated a decrease and those with good-quality SAGS demonstrated an increase in scores by 17 weeks (ANOVA F=4.16, p=0.024). For students whose SAGS skills were good at both week 1 and 10, interviewing skills declined in weeks 1-10 and then increased significantly at week 17. For those whose SAGS remained 'poor' in weeks 1-10, interviewing skills declined in weeks 10-17. In general, the quality of students' SAGS improved over time. Poor baseline SAGS skills and failure to improve were associated with a decrease in interviewing skills at 17 weeks. For students with better SAGS, interviewing skills increased at week 17. Improvement in SAGS skills was not associated with improved interviewing skills. Understanding structured self-assessment skills helps identify student characteristics that influence progressive mastery of communication skills and therefore may inform curriculum and remediation tailoring.

Weighing in on the Teacher Merit Pay Debate. Notes

ERIC Educational Resources Information Center

Froese-Germain, Bernie

2011-01-01

First the good news. There's a growing consensus that the quality of teachers and teaching is a major factor--some would say the most important school-based factor--in the quality of student learning. In sum (and this comes as no surprise to the teaching profession), good teaching matters. The bad news is that, in this highly charged climate of…

The Renewal of Quality Assurance in UK Higher Education

ERIC Educational Resources Information Center

McClaran, Anthony

2010-01-01

It might not have been quite what he had in mind when he said it, but Aristotle was right: good quality assurance must be a habit embedded at every level within higher education, not an isolated occurrence. But even good habits can become mere routine, in danger of being emptied of their original purpose and meaning. Periodically, review and…

The Promise of Pre-K. Expanding Quality Preschool in Cincinnati. Education/Childcare. Executive Summary

ERIC Educational Resources Information Center

Shields, Michael

2016-01-01

Quality preschool improves children's educational outcomes into the elementary grades, and good programs with wraparound childcare anchor family financial stability by enabling parents to work. Yet, too few Cincinnati children have access to a good preschool or any preschool at all. A levy on this November's ballot seeks to change that by adding a…

Primary School Pupils' Views of Characteristics of Good Primary School Teachers: An Exploratory, Open Approach for Investigating Pupils' Perceptions

ERIC Educational Resources Information Center

Bakx, Anouke; Koopman, Maaike; de Kruijf, Judith; den Brok, Perry

2015-01-01

This article reports on results of a study on pupils' perceptions on teacher quality in primary education. Pupils' perceptions of desired characteristics of good teachers in primary education were compared to results of research into teacher quality from different perspectives: (1) perception studies of ideal teaching-and-learning environments;…

Information bias in contingent valuation: effects of personal relevance, quality of information, and motivational orientation

Treesearch

Icek Ajzen; Thomas C. Brown; Lori H. Rosenthal

1996-01-01

A laboratory experiment examined the potential for information bias in contingent valuation (CV). Consistent with the view that information about a public or private good can function as a persuasive communication, willingness to pay (WTP) was found to increase with the quality of arguments used to describe the good, especially under conditions of high personal...

Teacher Quality: What You Need to Know

ERIC Educational Resources Information Center

Joyce Foundation, 2010

2010-01-01

Once kids walk in the school door, the most important factor for how well they learn is the quality of their teachers. Having good teachers is important for all kids. But it's especially important for kids who are falling behind. Research shows that students who are taught by a really good teacher can make as much as a year and a half's worth of…

Comparison of Indoor Air Quality Management Strategies between the School and District Levels in New York State

ERIC Educational Resources Information Center

Lin, Shao; Kielb, Christine L.; Reddy, Amanda L.; Chapman, Bonnie R.; Hwang, Syni-An

2012-01-01

Background: Good school indoor air quality (IAQ) can affect the health and functioning of school occupants. Thus, it is important to assess the degree to which schools and districts employ strategies to ensure good IAQ management. We examined and compared the patterns of IAQ management strategies between public elementary schools and their school…

Use of a macroinvertebrate based biotic index to estimate critical metal concentrations for good ecological water quality.

PubMed

Van Ael, Evy; De Cooman, Ward; Blust, Ronny; Bervoets, Lieven

2015-01-01

Large datasets from total and dissolved metal concentrations in Flemish (Belgium) fresh water systems and the associated macroinvertebrate-based biotic index MMIF (Multimetric Macroinvertebrate Index Flanders) were used to estimate critical metal concentrations for good ecological water quality, as imposed by the European Water Framework Directive (2000). The contribution of different stressors (metals and water characteristics) to the MMIF were studied by constructing generalized linear mixed effect models. Comparison between estimated critical concentrations and the European and Flemish EQS, shows that the EQS for As, Cd, Cu and Zn seem to be sufficient to reach a good ecological quality status as expressed by the invertebrate-based biotic index. In contrast, the EQS for Cr, Hg and Pb are higher than the estimated critical concentrations, which suggests that when environmental concentrations are at the same level as the EQS a good quality status might not be reached. The construction of mixed models that included metal concentrations in their structure did not lead to a significant outcome. However, mixed models showed the primary importance of water characteristics (oxygen level, temperature, ammonium concentration and conductivity) for the MMIF. Copyright © 2014 Elsevier Ltd. All rights reserved.

“Skill of Generalized Additive Model to Detect PM2.5 Health ...

EPA Pesticide Factsheets

Summary. Measures of health outcomes are collinear with meteorology and air quality, making analysis of connections between human health and air quality difficult. The purpose of this analysis was to determine time scales and periods shared by the variables of interest (and by implication scales and periods that are not shared). Hospital admissions, meteorology (temperature and relative humidity), and air quality (PM2.5 and daily maximum ozone) for New York City during the period 2000-2006 were decomposed into temporal scales ranging from 2 days to greater than two years using a complex wavelet transform. Health effects were modeled as functions of the wavelet components of meteorology and air quality using the generalized additive model (GAM) framework. This simulation study showed that GAM is extremely successful at extracting and estimating a health effect embedded in a dataset. It also shows that, if the objective in mind is to estimate the health signal but not to fully explain this signal, a simple GAM model with a single confounder (calendar time) whose smooth representation includes a sufficient number of constraints is as good as a more complex model.Introduction. In the context of wavelet regression, confounding occurs when two or more independent variables interact with the dependent variable at the same frequency. Confounding also acts on a variety of time scales, changing the PM2.5 coefficient (magnitude and sign) and its significance ac

A Single Father's Shopping Bag: Purchasing Decisions in Single-Father Families

ERIC Educational Resources Information Center

Ziol-Guest, Kathleen M.

2009-01-01

Using data from the 1980 to 2003 panels of the Consumer Expenditure Survey, this article examines purchasing decisions in father-headed single-parent families. Single-father expenditures are compared to both married-parent expenditures and single-mother expenditures on 17 broad categories of household-level goods and services. Multivariate…

Effects of insomnia and sleep medication on health-related quality of life.

PubMed

Sasai, Taeko; Inoue, Yuichi; Komada, Yoko; Nomura, Takashi; Matsuura, Masato; Matsushima, Eisuke

2010-05-01

This study, using Short-Form 8 (SF-8), was undertaken to assess the effects of insomnia and sleep medication use on quality of life (QOL) in 2822 people (ages 20-97years) in a rural population. Factors associated with deterioration of the mental component summary (MCS) score and physical component summary (PCS) score were investigated. Questionnaires asked participants' basic information and included assessments using SF-8, the Pittsburgh Sleep Quality Index (PSQI), and a 12-item version of the Center for Epidemiological Studies Depression scale. Results of PSQI supported the classification of subjects as good sleepers, good sleepers using sleep medication, insomniacs, and insomniacs using sleep medication. Insomnia was associated with low scores of MCS and PCS. Nevertheless, sleep medication use was associated with low PCS scores only. Good sleepers using sleep medication had significantly higher MCS scores than either insomniacs or insomniacs using sleep medication, but lower scores than good sleepers. Similarly to insomniacs using sleep medication, good sleepers using sleep medication had significantly lower PCS scores than either good sleepers or insomniacs. Sleep medication was useful to improve mental QOL. That usage, however, might degrade the physical QOL, possibly because of the medication's adverse effects. Copyright 2010 Elsevier B.V. All rights reserved.

Clinical trials of homoeopathy.

PubMed Central

Kleijnen, J; Knipschild, P; ter Riet, G

1991-01-01

OBJECTIVE--To establish whether there is evidence of the efficacy of homoeopathy from controlled trials in humans. DESIGN--Criteria based meta-analysis. Assessment of the methodological quality of 107 controlled trials in 96 published reports found after an extensive search. Trials were scored using a list of predefined criteria of good methodology, and the outcome of the trials was interpreted in relation to their quality. SETTING--Controlled trials published world wide. MAIN OUTCOME MEASURES--Results of the trials with the best methodological quality. Trials of classical homoeopathy and several modern varieties were considered separately. RESULTS--In 14 trials some form of classical homoeopathy was tested and in 58 trials the same single homoeopathic treatment was given to patients with comparable conventional diagnosis. Combinations of several homoeopathic treatments were tested in 26 trials; isopathy was tested in nine trials. Most trials seemed to be of very low quality, but there were many exceptions. The results showed a positive trend regardless of the quality of the trial or the variety of homeopathy used. Overall, of the 105 trials with interpretable results, 81 trials indicated positive results whereas in 24 trials no positive effects of homoeopathy were found. The results of the review may be complicated by publication bias, especially in such a controversial subject as homoeopathy. CONCLUSIONS--At the moment the evidence of clinical trials is positive but not sufficient to draw definitive conclusions because most trials are of low methodological quality and because of the unknown role of publication bias. This indicates that there is a legitimate case for further evaluation of homoeopathy, but only by means of well performed trials. PMID:1825800

High-temperature Y267 EPDM elastomer: field and laboratory experiences, August 1981

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hirasuna, A.R.; Friese, G.J.; Stephens, C.A.

1982-03-01

Experiences which indicate the superiority of Y267 EPDM elastomer for high-temperature brines and other environments uses are summarized. Its good processing qualities, extremely good thermochemical stability, extremely good mechanical properties, its low-cost constituents, and its good performance in hydrocarbons are described in some case histories. (MCW)

Quality assurance and accreditation.

PubMed

1997-01-01

In 1996, the Joint Commission International (JCI), which is a partnership between the Joint Commission on Accreditation of Healthcare Organizations and Quality Healthcare Resources, Inc., became one of the contractors of the Quality Assurance Project (QAP). JCI recognizes the link between accreditation and quality, and uses a collaborative approach to help a country develop national quality standards that will improve patient care, satisfy patient-centered objectives, and serve the interest of all affected parties. The implementation of good standards provides support for the good performance of professionals, introduces new ideas for improvement, enhances the quality of patient care, reduces costs, increases efficiency, strengthens public confidence, improves management, and enhances the involvement of the medical staff. Such good standards are objective and measurable; achievable with current resources; adaptable to different institutions and cultures; and demonstrate autonomy, flexibility, and creativity. The QAP offers the opportunity to approach accreditation through research efforts, training programs, and regulatory processes. QAP work in the area of accreditation has been targeted for Zambia, where the goal is to provide equal access to cost-effective, quality health care; Jordan, where a consensus process for the development of standards, guidelines, and policies has been initiated; and Ecuador, where JCI has been asked to help plan an approach to the evaluation and monitoring of the health care delivery system.

WHO expert committee on specifications for pharmaceutical preparations. Fortieth report.

PubMed

2006-01-01

This report presents the recommendations of an international group of experts convened by the World Health Organization to consider matters concerning the quality assurance of pharmaceuticals and specifications for drug substances and dosage forms. The report is complemented by a number of annexes. These include: a list of available International Chemical Reference Substances and International Infrared Spectra; supplementary guidelines on good manufacturing practices for heating, ventilation and air-conditioning systems for non-sterile pharmaceutical dosage forms; updated supplementary guidelines on good manufacturing practices for the manufacture of herbal medicines; supplementary guidelines on good manufacturing practices for validation; good distribution practices for pharmaceutical products; a model quality assurance system for procurement agencies (recommendations for quality assurance systems focusing on prequalification of products and manufacturers, purchasing, storage and distribution of pharmaceutical products); multisource (generic) pharmaceutical products: guidelines on registration requirements to establish interchangeability; a proposal to waive in vivo bioequivalence requirements for WHO Model List of Essential Medicines immediate-release, solid oral dosage forms; and additional guidance for organizations performing in vivo bioequivalence studies.

Fabrication of Titania Nanotubes for Gas Sensing Applications

NASA Astrophysics Data System (ADS)

Dzilal, A. A.; Muti, M. N.; John, O. D.

2010-03-01

Detection of hydrogen is needed for industrial process control and medical applications where presence of hydrogen indicates different type of health problems. Titanium dioxide nanotube structure is chosen as an active component in the gas sensor because of its highly sensitive electrical resistance to hydrogen over a wide range of concentrations. The objective of the work is to fabricate good quality titania nanotubes suitable for hydrogen sensing applications. The fabrication method used is anodizing method. The anodizing parameters namely the voltage, time duration, concentration of hydrofluoric acid in water, separation between the electrodes and the ambient temperature are varied accordingly to find the optimum anodizing conditions for production of good quality titania nanotubes. The highly ordered porous titania nanotubes produced by this method are in tabular shape and have good uniformity and alignment over large areas. From the investigation done, certain set of anodizing parameters have been found to produce good quality titania nanotubes with diameter ranges from 47 nm to 94 nm.

The disability paradox: high quality of life against all odds.

PubMed

Albrecht, G L; Devlieger, P J

1999-04-01

This paper builds on the work of Sol Levine to examine a disability paradox: Why do many people with serious and persistent disabilities report that they experience a good or excellent quality of life when to most external observers these individuals seem to live an undesirable daily existence? The paper uses a qualitative approach to develop an explanation of this paradox using semi-structured interviews with 153 persons with disabilities. 54.3% of the respondents with moderate to serious disabilities reported having an excellent or good quality of life confirming the existence of the disability paradox. Analysis of the interviews reveals that for both those who report that they have a good and those who say they have a poor quality of life, quality of life is dependent upon finding a balance between body, mind and spirit in the self and on establishing and maintaining an harmonious set of relationships within the person's social context and external environment. A theoretical framework is developed to express these relationships. The findings are discussed for those with and without disabilities and directions are given for future research.

Bibliometrics: Help or Hoax for Quality?

ERIC Educational Resources Information Center

Galetto, F.

2014-01-01

Higher Education Institutions should provide students good teaching with good professors who have good knowledge of the matter they are teaching. Unfortunately, many times, the opposite happens: career leaps depend on "bibliometric indexes" (Impact Points, "h"-index, "s"-index, "RG"-index,…

Evaluation of differences in quality of experience features for test stimuli of good-only and bad-only overall audiovisual quality

NASA Astrophysics Data System (ADS)

Strohmeier, Dominik; Kunze, Kristina; Göbel, Klemens; Liebetrau, Judith

2013-01-01

Assessing audiovisual Quality of Experience (QoE) is a key element to ensure quality acceptance of today's multimedia products. The use of descriptive evaluation methods allows evaluating QoE preferences and the underlying QoE features jointly. From our previous evaluations on QoE for mobile 3D video we found that mainly one dimension, video quality, dominates the descriptive models. Large variations of the visual video quality in the tests may be the reason for these findings. A new study was conducted to investigate whether test sets of low QoE are described differently than those of high audiovisual QoE. Reanalysis of previous data sets seems to confirm this hypothesis. Our new study consists of a pre-test and a main test, using the Descriptive Sorted Napping method. Data sets of good-only and bad-only video quality were evaluated separately. The results show that the perception of bad QoE is mainly determined one-dimensionally by visual artifacts, whereas the perception of good quality shows multiple dimensions. Here, mainly semantic-related features of the content and affective descriptors are used by the naïve test participants. The results show that, with increasing QoE of audiovisual systems, content semantics and users' a_ective involvement will become important for assessing QoE differences.

Using National Ambient Air Quality Standards for fine particulate matter to assess regional wildland fire smoke and air quality management.

PubMed

Schweizer, Don; Cisneros, Ricardo; Traina, Samuel; Ghezzehei, Teamrat A; Shaw, Glenn

2017-10-01

Wildland fire is an important ecological process in the California Sierra Nevada. Personal accounts from pre-20th century describe a much smokier environment than present day. The policy of suppression beginning in the early 20th century and climate change are contributing to increased megafires. We use a single particulate monitoring site at the wildland urban interface to explore impacts from prescribed, managed, and full suppression wildland fires from 2006 to 2015 producing a contextual assessment of smoke impacts over time at the landscape level. Prescribed fire had little effect on local fine particulate matter (PM 2.5 ) air quality with readings typical of similar non-fire times; hourly and daily good to moderate Air Quality Index (AQI) for PM 2.5 , maximum hourly concentrations 21-103 μg m -3 , and mean concentrations between 7.7 and 13.2 μg m -3 . Hourly and daily AQI was typically good or moderate during managed fires with 3 h and one day reaching unhealthy while the site remained below National Ambient Air Quality Standards (NAAQS), with maximum hourly concentrations 27-244 μg m -3 , and mean concentrations 6.7-11.7 μg m -3 . The large high intensity fire in this area created the highest short term impacts (AQI unhealthy for 4 h and very unhealthy for 1 h), 11 unhealthy for sensitive days, and produced the only annual value (43.9 μg m -3 ) over the NAAQS 98th percentile for PM 2.5 (35 μg m -3 ). Pinehurst remained below the federal standards for PM 2.5 when wildland fire in the local area was managed to 7800 ha (8-22% of the historic burn area). Considering air quality impacts from smoke using the NAAQS at a landscape level over time can give land and air managers a metric for broader evaluation of smoke impacts particularly when assessing ecologically beneficial fire. Allowing managers to control the amount and timing of individual wildland fire emissions can help lessen large smoke impacts to public health from a megafire. Published by Elsevier Ltd.

British Thoracic Society Quality Standards for acute non-invasive ventilation in adults

PubMed Central

Davies, Michael; Allen, Martin; Bentley, Andrew; Bourke, Stephen C; Creagh-Brown, Ben; D’Oliveiro, Rachel; Glossop, Alastair; Gray, Alasdair; Jacobs, Phillip; Mahadeva, Ravi; Moses, Rachael; Setchfield, Ian

2018-01-01

Introduction The purpose of the quality standards document is to provide healthcare professionals, commissioners, service providers and patients with a guide to standards of care that should be met for the provision of acute non-invasive ventilation in adults together with measurable markers of good practice. Methods Development of British Thoracic Society (BTS) Quality Standards follows the BTS process of quality standard production based on the National Institute for Health and Care Excellence process manual for the development of quality standards. Results 6 quality statements have been developed, each describing a standard of care for the provision of acute non-invasive ventilation in the UK, together with measurable markers of good practice. Conclusion BTS Quality Standards for acute non-invasive ventilation in adults form a key part of the range of supporting materials that the Society produces to assist in the dissemination and implementation of guideline’s recommendations. PMID:29636979

A new quality of bone ultrasound research.

PubMed

Gluer, C C

2008-07-01

Quantitative ultrasound (QUS) methods have strong power to predict osteoporotic fractures, but they are also very relevant for the assessment of bone quality. A representative sample of recent studies addressing these topics can be found in this special issue. Further pursuit of these methods will establish micro-QUS imaging methods as tools for measuring specific aspects of bone quality. Once this is achieved, we will be able to link such data to the clinical QUS methods used in vivo to determine which aspects of bone quality cause QUS to be a predictor of fracture risk that is independent of bone mineral density (BMD). Potentially this could lead to the development of a new generation of QUS devices for improved and expanded clinical assessment. Good quality of basic science work will thus lead to good quality of clinical patient examinations on the basis of a more detailed assessment of bone quality.

Quality Indicators for Single-Case Research on Social Skill Interventions for Children with Autistic Spectrum Disorder

ERIC Educational Resources Information Center

Wang, Shin-Yi; Parrila, Rauno

2008-01-01

In this paper, we describe a quality checklist that parents, teachers, clinicians, and policy-makers with basic research skills can use to systematically evaluate the methodological quality of single-case studies on social skill training of children with autistic spectrum disorder (ASD). We provide a rationale for included quality indicators, and…

Patient satisfaction is biased by renovations to the interior of a primary care office: a pretest-posttest assessment.

PubMed

Tièche, Raphaël; da Costa, Bruno R; Streit, Sven

2016-08-11

Measuring quality of care is essential to improve primary care. Quality of primary care for patients is usually assessed by patient satisfaction questionnaires. However, patients may not be able to judge quality of care without also reflecting their perception of the environment. We determined the effect that redesigning a primary care office had on patient satisfaction. We hypothesized that renovating the interior would make patients more satisfied with the quality of medical care. We performed a Pretest-Posttest analysis in a recently renovated single-practice primary care office in Grenchen, Switzerland. Before and after renovation, we distributed a questionnaire to assess patient satisfaction in four domains. We chose a Likert scale (1 = very poor to 6 = very good), and 12 quality indicators, and included two consecutive samples of patients presenting at the primary care office before (n = 153) and after (n = 153) interior design renovation. Response rate was high (overall 85 %). The sample was similar to the enlisted patient collective, but the sample population was older (60 years) than the collective (52 years). Patient satisfaction was higher for all domains after the office was renovated (p < 0.01-0.001). Results did not change when we included potential confounders in the multivariable model (p < 0.01). Renovating the interior of a primary care office was associated with improved patient satisfaction, including satisfaction in domains otherwise unchanged. Physician skills and patient satisfaction sometimes depend on surrounding factors that may bias the ability of patients to assess the quality of medical care. These biases should be taken into account when quality assessment instruments are designed for patients.

Investigations on synthesis, growth and physicochemical properties of semi-organic NLO crystal bis(thiourea) ammonium nitrate for nonlinear frequency conversion

NASA Astrophysics Data System (ADS)

Anbarasi, A.; Ravi Kumar, S. M.; Sundar, G. J. Shanmuga; Mosses, M. Allen; Raj, M. Packiya; Prabhakaran, M.; Ravisankar, R.; Gunaseelan, R.

2017-10-01

Bis(thiourea) ammonium nitrate (BTAN), a new nonlinear optical crystal was grown successfully by slow evaporation technique using water as solvent at room temperature. The grown crystals were optically good quality with dimensions upto 10 × 6 × 3 mm3. Single crystal X-Ray diffraction analysis reveals that the crystal lattice is orthorhombic. From Powder X-ray diffraction analysis the diffraction planes have been indexed. The presence of the various functional groups of BTAN was identified through FTIR spectroscopic analysis. UV cut-off wavelength was observed from optical absorbance spectrum and it was found to be 240 nm. Second harmonic efficiency was determined using Kurtz powder method in comparison with KDP to confirm the nonlinearity of the material. Thermal analysis confirmed that grown crystal is thermally stable upto 184 °C. Microhardness studies show that hardness number (Hv) increases with load. Conductivity measurements such as dielectric, ac and photoconductivity were studied. Growth mechanism and surface features of the as grown single crystal was analysed by chemical etching analysis.

[Study on physiological characteristics and effects of salt stress in Andrographis paniculata].

PubMed

Chen, Juan; Gu, Wei; Duan, Jin-Ao; Su, Shu-Lan; Shao, Jing; Geng, Chao

2014-08-01

To study the physiological characteristics and effects of salt stress in Andrographis paniculata. Andrographis paniculata was treated with NaCl of different concentration. The photosynthetic characteristics and transpiration rate were an- alyzed by LI-6400 Portable Photosynthesis System. The activities of enzymes were studied with kits. The net photosynthetic rate (Pn) and stomatal conductance (Gs) showed a diurnal variation of bimodal curve, the transpiration rate (Tr) and stomatal limitation (Ls) both had a single peak diurnal variation, while the intercellular CO2 concentration (Ci) and the water use efficiency (WUE) presented a single valley type of diurnal variation. With salt concentration rising, Pn, Tr, Ci, Ca and WUE decreased but L, increased, the activities of SOD, CAT and POD increased firstly and then decreased, while the MDA and proline content showed a rising trend. Andrographis paniculata is a type of sun plant. The net photosynthetic rate of Andrographis paniculata leaves has an obvious "midday depression" phenomenon. The results also indicate that Andrographis paniculata has a resistance to salt stress and appropriate shade is good for the quality improvement.

X-ray diffraction, spectroscopic and mechanical studies on potential organic NLO materials of metaNitroaniline and N-3-Nitrophenyl Acetamide single crystals

NASA Astrophysics Data System (ADS)

Senthil, S.; Madhavan, J.

2015-02-01

In the present paper, attempts were made to grow good quality metaNitroaniline (mNA) and N-3-Nitrophenyl (3-NAA) single crystals. The lattice parameter values from the Powder X-ray diffraction pattern confirms that mNA belongs to orthorhombic crystal system with the unit cell parameter values of a = 6.501 Å, b = 19.330 Å and c = 5.082 Å with space group Pbc21. Similarly the powder XRD data indicates that 3-NAA crystal retained its monoclinic structure with lattice parameter values a = 9.762 Å, b =13.287 Å, c =13.226 Å, and β = 102.99°. Investigation has been carried out to assign the vibrational frequencies of the grown crystals by Fourier Transform infrared spectroscopy technique. The SHG efficiency of mNA and 3NAA was determined by Kurtz and Perry powder technique. The Optical absorption study confirms the suitability of the crystals for device applications. The mechanical properties of the grown crystals have been studied using Vickers microhardness tester.

Factors affecting healing after arthroscopic rotator cuff repair

PubMed Central

Abtahi, Amir M; Granger, Erin K; Tashjian, Robert Z

2015-01-01

Rotator cuff repair has been shown to have good long-term results. Unfortunately, a significant proportion of repairs still fail to heal. Many factors, both patient and surgeon related, can influence healing after repair. Older age, larger tear size, worse muscle quality, greater muscle-tendon unit retraction, smoking, osteoporosis, diabetes and hypercholesterolemia have all shown to negatively influence tendon healing. Surgeon related factors that can influence healing include repair construct-single vs double row, rehabilitation, and biologics including platelet rich plasma and mesenchymal stem cells. Double-row repairs are biomechanically stronger and have better healing rates compared with single-row repairs although clinical outcomes are equivalent between both constructs. Slower, less aggressive rehabilitation programs have demonstrated improved healing with no negative effect on final range of motion and are therefore recommended after repair of most full thickness tears. Additionally no definitive evidence supports the use of platelet rich plasma or mesenchymal stem cells regarding improvement of healing rates and clinical outcomes. Further research is needed to identify effective biologically directed augmentations that will improve healing rates and clinical outcomes after rotator cuff repair. PMID:25793161

Automated analysis of siRNA screens of cells infected by hepatitis C and dengue viruses based on immunofluorescence microscopy images

NASA Astrophysics Data System (ADS)

Matula, Petr; Kumar, Anil; Wörz, Ilka; Harder, Nathalie; Erfle, Holger; Bartenschlager, Ralf; Eils, Roland; Rohr, Karl

2008-03-01

We present an image analysis approach as part of a high-throughput microscopy siRNA-based screening system using cell arrays for the identification of cellular genes involved in hepatitis C and dengue virus replication. Our approach comprises: cell nucleus segmentation, quantification of virus replication level in the neighborhood of segmented cell nuclei, localization of regions with transfected cells, cell classification by infection status, and quality assessment of an experiment and single images. In particular, we propose a novel approach for the localization of regions of transfected cells within cell array images, which combines model-based circle fitting and grid fitting. By this scheme we integrate information from single cell array images and knowledge from the complete cell arrays. The approach is fully automatic and has been successfully applied to a large number of cell array images from screening experiments. The experimental results show a good agreement with the expected behaviour of positive as well as negative controls and encourage the application to screens from further high-throughput experiments.

Levels of Cd, Cu, Pb and V in marine sediments in the vicinity of the Single Buoy Moorings (SBM3) at Mina Al Fahal in the Sultanate of Oman.

PubMed

Al-Husaini, Issa; Abdul-Wahab, Sabah; Ahamad, Rahmalan; Chan, Keziah

2014-06-15

Recently in the Sultanate of Oman, there has been a rapid surge of coastal developments. These developments cause metal contamination, which may affect the habitats and communities at and near the coastal region. As a result, a study was conducted to assess the level of metal contamination and its impact on the marine sediments in the vicinity of the Single Buoy Moorings 3 (SBM3) at Mina Al Fahal in the Sultanate of Oman. Marine subtidal sediment samples were collected from six different stations of the SBM3 for the period ranging from June 2009 to April 2010. These samples were then analyzed for their level and distribution of the heavy metals of cadmium (Cd), copper (Cu), lead (Pb) and vanadium (V). Overall, low concentrations of all four heavy metals were measured from the marine sediments, indicating that the marine at SBM3 is of good quality. Copyright © 2014 Elsevier Ltd. All rights reserved.

Single embryo transfer: the role of natural cycle/minimal stimulation IVF in the future.

PubMed

Nygren, Karl-Gösta

2007-05-01

There are several good reasons to assume that single embryo transfer (SET) eventually will become the norm internationally in IVF treatments. A tendency is clearly visible, as demonstrated in the latest IVF World Report. The Nordic countries and Belgium have been leading the way. Sweden at present has 70% SET, with 5% twins and a pregnancy rate per transfer remaining constant at about 30%. As a consequence, recent data show a drastic reduction of the risk of prematurity and therefore of child morbidity and perinatal mortality. It is now time to discuss alternatives to the current clinical policy of quite an aggressive ovarian stimulation in settings where SET is the norm. When and at what proportion could natural cycle/soft stimulation be used? What group of patients would benefit? What will the consequences be in terms of efficacy, safety, cost, time and quality of life? Selection of the most beneficial, rather than the most aggressive, ovarian stimulation protocol by clinicians and by the couples themselves in the future may well include a much wider use of natural cycle/soft stimulation in IVF.

Hydroxyapatite ceramic implants for cranioplasty in children: a single-center experience.

PubMed

Zaccaria, Laura; Tharakan, Sasha Job; Altermatt, Stefan

2017-02-01

The use of hydroxyapatite ceramic (HAC) implants for the treatment of skull defects in pediatric patients started 2010 at our institution. Ceramic implants facilitate osteoblast migration and therefore optimize osteointegration with the host bone. The purpose of this study is to report a single-center experience with this treatment modality. A retrospective review of all patients from July 2010 through June 2014 undergoing a cranioplasty using hydroxyapatite ceramic implant and managed at a single institution was performed. Indication for cranioplasty, the hospital course, and follow-up were reviewed. Bone density was measured in Hounsfield Units (HU) and osteointegration was calculated using Mimics Software® (Mimics Innovation Suite v17.0 Medical, Materialize, Leuven, Belgium). Over the 4-year period, six patients met criteria for the study. Five patients had an osteointegration of nearly 100%. One patient had an incomplete osteointegration with a total bone-implant contact area of 69%. The mean bone density was 2800 HU (2300-3000 HU). Bone density alone is estimated to have a Hounsfield value between 400 and 2000 HU depending on the body region and bone quality. There were no major complications, and the patients were highly satisfied with the esthetical result. Hydroxyapatite ceramic implants for cranioplasty in pediatric patients are a good choice for different indications. The implants show excellent osteointegration and esthetical results.

Multi-detection of preservatives in cheeses by liquid chromatography-tandem mass spectrometry.

PubMed

Fuselli, Fabio; Guarino, Chiara; La Mantia, Alessandro; Longo, Lucia; Faberi, Angelo; Marianella, Rosa Maria

2012-10-01

The incorrect use of preservatives in cheeses may compromise food safety and damage consumers. According to the law, more than one preservative may be contemporarily used in cheeses. So a method for their contemporary detection may be useful for both manufacturers and control agencies quality control. In this research a liquid chromatography-tandem mass spectrometric with electrospray ionization method for the multi-determination of seven preservatives (benzoic acid, citric acid, hexamethylenetetramine, lysozyme, natamycin, nisin and sorbic acid) in cheese was developed. The preservatives were contemporarily extracted from cheese by a single procedure, and analyzed by RP-LC/ESI-MS/MS (Ion Trap) in positive ionization mode, with single reaction monitoring (SRM) acquisition. Three sample types (hard, pasta filata and fresh cheese) were used for method evaluation. Recoveries were mostly higher than 90%; MDLs ranged from 0.02 to 0.26 mgkg(-1), and MQLs were included between 0.07 and 0.88 mgkg(-1). Due to matrix effect, quantitation was performed by referring to a matrix matched calibration curve, for each cheese typology. This method was also applied to commercial cheese samples, with good results. It appears fast, reliable and suitable for both screening and confirmation of the presence and quantitation of the preservatives in a single, multi-detection analysis. Copyright © 2012 Elsevier B.V. All rights reserved.

Propranolol for treating emotional, behavioural, autonomic dysregulation in children and adolescents with autism spectrum disorders.

PubMed

Sagar-Ouriaghli, Ilyas; Lievesley, Kate; Santosh, Paramala J

2018-06-01

To date, there is no single medication prescribed to alleviate all the core symptoms of Autism Spectrum Disorder (ASD; National Institute of Health and Care Excellence, 2016). Both serotonin reuptake inhibitors and drugs for psychosis possess therapeutic drawbacks when managing anxiety and aggression in ASD. This review sought to appraise the use of propranolol as a pharmacological alternative when managing emotional, behavioural and autonomic dysregulation (EBAD) and other symptoms. Sixteen reports examined the administration of propranolol in the context of ASD. Sixteen reports broadly covered cognitive domains, neural correlates, and behavioural domains. From the eight single-dose clinical trials, propranolol led to significant improvements in cognitive performance - verbal problem solving, social skills, mouth fixation, and conversation reciprocity; and changes in neural correlates - improvement in semantic networks and functional connectivity. The remaining eight case series and single case reports showed improvements in EBAD, anxiety, aggressive, self-injurious and hypersexual behaviours. Additionally, propranolol significantly improved similar behavioural domains (aggression and self-injury) for those with acquired brain injury. This review indicates that propranolol holds promise for EBAD and cognitive performance in ASD. Given the lack of good quality clinical trials, randomised controlled trials are warranted to explore the efficacy of propranolol in managing EBAD in ASD.

Splitting livers: Trans-hilar or trans-umbilical division? Technical aspects and comparative outcomes.

PubMed

de Ville de Goyet, J; di Francesco, F; Sottani, V; Grimaldi, C; Tozzi, A E; Monti, L; Muiesan, P

2015-08-01

Controversy remains about the best line of division for liver splitting, through Segment IV or through the umbilical fissure. Both techniques are currently used, with the choice varying between surgical teams in the absence of an evidence-based choice. We conducted a single-center retrospective analysis of 47 left split liver grafts that were procured with two different division techniques: "classical" (N = 28, Group A) or through the umbilical fissure and plate (N = 19, Group B). The allocation of recipients to each group was at random; a single transplant team performed all transplantations. Demographics, characteristics, technical aspects, and outcomes were similar in both groups. The grafts in Group A, prepared with the classical technique, were procured more often with a single BD orifice compared with the grafts in Group B; however, this was not associated with a higher incidence of biliary problems in this series of transplants (96% actual graft survival rate [median ± s.d. 26 ± 20 months]). Both techniques provide good quality split grafts and an excellent outcome; surgical expertise with a given technique is more relevant than the technique itself. The classical technique, however, seems to be more flexible in various ways, and surgeons may find it to be preferable. © 2015 John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.

Measurement of narcolepsy symptoms: The Narcolepsy Severity Scale.

PubMed

Dauvilliers, Yves; Beziat, Severine; Pesenti, Carole; Lopez, Regis; Barateau, Lucie; Carlander, Bertrand; Luca, Gianina; Tafti, Mehdi; Morin, Charles M; Billiard, Michel; Jaussent, Isabelle

2017-04-04

To validate the Narcolepsy Severity Scale (NSS), a brief clinical instrument to evaluate the severity and consequences of symptoms in patients with narcolepsy type 1 (NT1). A 15-item scale to assess the frequency and severity of excessive daytime sleepiness, cataplexy, hypnagogic hallucinations, sleep paralysis, and disrupted nighttime sleep was developed and validated by sleep experts with patients' feedback. Seventy untreated and 146 treated adult patients with NT1 were evaluated and completed the NSS in a single reference sleep center. The NSS psychometric properties, score changes with treatment, and convergent validity with other clinical parameters were assessed. The NSS showed good psychometric properties with significant item-total score correlations. The factor analysis indicated a 3-factor solution with good reliability, expressed by satisfactory Cronbach α values. The NSS total score temporal stability was good. Significant NSS score differences were observed between untreated and treated patients (dependent sample, 41 patients before and after sleep therapy; independent sample, 29 drug-free and 105 treated patients). Scores were lower in the treated populations (10-point difference between groups), without ceiling effect. Significant correlations were found among NSS total score and daytime sleepiness (Epworth Sleepiness Scale, Mean Sleep Latency Test), depressive symptoms, and health-related quality of life. The NSS can be considered a reliable and valid clinical tool for the quantification of narcolepsy symptoms to monitor and optimize narcolepsy management. © 2017 American Academy of Neurology.

Groundwater quality assessment using geospatial and statistical tools in Salem District, Tamil Nadu, India

NASA Astrophysics Data System (ADS)

Arulbalaji, P.; Gurugnanam, B.

2017-10-01

The water quality study of Salem district, Tamil Nadu has been carried out to assess the water quality for domestic and irrigation purposes. For this purpose, 59 groundwater samples were collected and analyzed for pH, electrical conductivity (EC), total dissolved solids (TDS), major anions (HCO3 -, CO3 -, F-, Cl-, NO2 - + NO3 -, and SO4 2-), major cations (Ca2+ Mg2+, Na+, and K+), alkalinity (ALK), and hardness (HAR). To assess the water quality, the following chemical parameters were calculated based on the analytical results, such as Piper plot, water quality index (WQI), sodium adsorption ratio (SAR), magnesium hazard (MH), Kelly index (KI), and residual sodium carbonate (RSC). Wilcox diagram represents that 23% of the samples are excellent to good, 40% of the samples are good to permissible, 10% of the samples are permissible to doubtful, 24% of the samples are doubtful unsuitable, and only 3% of the samples are unsuitable for irrigation. SAR values shows that 52% of the samples indicate high-to-very high and low-to-medium alkali water. KI values indicate good quality (30%) and not suitable (70%) for irrigation purposes. RSC values indicate that 89% of samples are suitable for irrigation purposes. MH reveals that 17% suitable and 83% samples are not suitable for irrigation purposes and for domestic purposes the excellent (8%), good (48%), and poor (44%). The agricultural waste, fertilizer used, soil leaching, urban runoff, livestock waste, and sewages are the sources of poor water quality. Some samples are not suitable for irrigation purposes due to high salinity, hardness, and magnesium concentration. In general, the groundwater of the Salem district was polluted by agricultural activities, anthropogenic activities, ion exchange, and weathering.

The effects of price and perceived quality on the behavioural economics of alcohol, amphetamine, cannabis, cocaine, and ecstasy purchases.

PubMed

Goudie, Andrew J; Sumnall, Harry R; Field, Matt; Clayton, Hannah; Cole, Jon C

2007-07-10

Behavioural economic models of substance use describe the relationship between changes in unit price and consumption. However, these models rarely take account of the perceived quality (i.e. potency) of controlled drugs. Therefore we investigated the effects of both price and quality on the decision to purchase controlled drugs by polysubstance misusers. Forty current polysubstance misusers (29 males, 11 females; mean age 23.8) were recruited into the study. Participants were asked to hypothetically purchase drugs from a price list of alcohol, amphetamine, cannabis, cocaine and ecstasy at different levels of quality and price (i.e. better quality drugs cost more money). The disposable income available for those purchases was systematically varied in order to determine the impact of income on the decision to purchase drugs. Demand for both normal and strong alcohol was income inelastic. Demand for both poor and average quality cannabis and ecstasy was income inelastic, but demand for good quality cannabis and ecstasy was income elastic. The demand for poor quality cocaine was income inelastic, with the demand for both average and good quality cocaine being income elastic. Participants reported too few purchases of amphetamine, which precluded behavioural economic analysis. These results suggest that, like other goods, controlled drugs are purchased based upon the consumer's interpretations of their relative value. Therefore, it is probable that the purchase and subsequent use of controlled drugs by polysubstance misusers will be heavily influenced by the economic environment.

Method for obtaining a collimated near-unity aspect ratio output beam from a DFB-GSE laser with good beam quality.

PubMed

Liew, S K; Carlson, N W

1992-05-20

A simple method for obtaining a collimated near-unity aspect ratio output beam from laser sources with extremely large (> 100:1) aspect ratios is demonstrated by using a distributed-feedback grating-surfaceemitting laser. Far-field power-in-the-bucket measurements of the laser indicate good beam quality with a high Strehl ratio.

Basic Investigation on Medical Ultrasonic Echo Image Compression by JPEG2000 - Availability of Wavelet Transform and ROI Method

DTIC Science & Technology

2001-10-25

Table III. In spite of the same quality in ROI, it is decided that the images in the cases where QF is 1.3, 1.5 or 2.0 are not good for diagnosis. Of...but (b) is not good for diagnosis by decision of ultrasonographer. Results reveal that wavelet transform achieves higher quality of image compared

The Multispectral Atmospheric Mapping Sensor (MAMS): Instrument description, calibration and data quality

NASA Technical Reports Server (NTRS)

Jedlovec, G. J.; Menzel, W. P.; Atkinson, R.; Wilson, G. S.; Arvesen, J.

1986-01-01

A new instrument has been developed to produce high resolution imagery in eight visible and three infared spectral bands from an aircraft platform. An analysis of the data and calibration procedures has shown that useful data can be obtained at up to 50 m resolution with a 2.5 milliradian aperture. Single sample standard errors for the measurements are 0.5, 0.2, and 0.9 K for the 6.5, 11.1, and 12.3 micron spectral bands, respectively. These errors are halved when a 5.0 milliradian aperture is used to obtain 100 m resolution data. Intercomparisons with VAS and AVHRR measurements show good relative calibration. MAMS development is part of a larger program to develop multispectral Earth imaging capabilities from space platforms during the 1990s.

[Considerations on the use of meta-analyses in the orientation of knowledge and decisions in Occupational Medicine].

PubMed

Catalani, Simona; Berra, Alessandro; Tomasi, Cesare; Romano, Canzio; Pira, Enrico; Garzaro, Giacomo; Apostoli, Pietro

2015-01-01

In recent years, due to the need to elaborate the amount of information available from the scientific literature, the meta-analyses and systematic reviews have become very numerous. The meta-analyses are carried out to evaluate the association between two events when single researches haven't provided comprehensive data. On the other hand, a good meta-analysis must satisfy certain criteria, from the selection of the studies until the evaluation of the outcomes; to this purpose, the application of methods for quality assessment is a crucial point to obtain data of adequate reliability. The aim of this review is to give some introductory tools for a critical approach to meta-analyses and systematic reviews, which have become useful instruments also in occupational medicine.