Diffusion kurtosis imaging can efficiently assess the glioma grade and cellular proliferation.

PubMed

Jiang, Rifeng; Jiang, Jingjing; Zhao, Lingyun; Zhang, Jiaxuan; Zhang, Shun; Yao, Yihao; Yang, Shiqi; Shi, Jingjing; Shen, Nanxi; Su, Changliang; Zhang, Ju; Zhu, Wenzhen

2015-12-08

Conventional diffusion imaging techniques are not sufficiently accurate for evaluating glioma grade and cellular proliferation, which are critical for guiding glioma treatment. Diffusion kurtosis imaging (DKI), an advanced non-Gaussian diffusion imaging technique, has shown potential in grading glioma; however, its applications in this tumor have not been fully elucidated. In this study, DKI and diffusion weighted imaging (DWI) were performed on 74 consecutive patients with histopathologically confirmed glioma. The kurtosis and conventional diffusion metric values of the tumor were semi-automatically obtained. The relationships of these metrics with the glioma grade and Ki-67 expression were evaluated. The diagnostic efficiency of these metrics in grading was further compared. It was demonstrated that compared with the conventional diffusion metrics, the kurtosis metrics were more promising imaging markers in distinguishing high-grade from low-grade gliomas and distinguishing among grade II, III and IV gliomas; the kurtosis metrics also showed great potential in the prediction of Ki-67 expression. To our best knowledge, we are the first to reveal the ability of DKI to assess the cellular proliferation of gliomas, and to employ the semi-automatic method for the accurate measurement of gliomas. These results could have a significant impact on the diagnosis and subsequent therapy of glioma.

Utilization of non-weapons-grade plutonium and highly enriched uranium with breeding of the 233U isotope in the VVER reactors using thorium and heavy water

NASA Astrophysics Data System (ADS)

Marshalkin, V. E.; Povyshev, V. M.

2015-12-01

A method for joint utilization of non-weapons-grade plutonium and highly enriched uranium in the thorium-uranium—plutonium oxide fuel of a water-moderated reactor with a varying water composition (D2O, H2O) is proposed. The method is characterized by efficient breeding of the 233U isotope and safe reactor operation and is comparatively simple to implement.

Posidonia oceanica as a Renewable Lignocellulosic Biomass for the Synthesis of Cellulose Acetate and Glycidyl Methacrylate Grafted Cellulose

PubMed Central

Coletti, Alessia; Valerio, Antonio; Vismara, Elena

2013-01-01

High-grade cellulose (97% α-cellulose content) of 48% crystallinity index was extracted from the renewable marine biomass waste Posidonia oceanica using H2O2 and organic peracids following an environmentally friendly and chlorine-free process. This cellulose appeared as a new high-grade cellulose of waste origin quite similar to the high-grade cellulose extracted from more noble starting materials like wood and cotton linters. The benefits of α-cellulose recovery from P. oceanica were enhanced by its transformation into cellulose acetate CA and cellulose derivative GMA-C. Fully acetylated CA was prepared by conventional acetylation method and easily transformed into a transparent film. GMA-C with a molar substitution (MS) of 0.72 was produced by quenching Fenton’s reagent (H2O2/FeSO4) generated cellulose radicals with GMA. GMA grafting endowed high-grade cellulose from Posidonia with adsorption capability. GMA-C removes β-naphthol from water with an efficiency of 47%, as measured by UV-Vis spectroscopy. After hydrolysis of the glycidyl group to glycerol group, the modified GMA-C was able to remove p-nitrophenol from water with an efficiency of 92%, as measured by UV-Vis spectroscopy. α-cellulose and GMA-Cs from Posidonia waste can be considered as new materials of potential industrial and environmental interest. PMID:28809259

DOE Office of Scientific and Technical Information (OSTI.GOV)

none,

The builder worked with Building Science Corporation to design ten HERS 53 homes with ICF foundations, foam-sheathed above-grade walls, and high-efficiency furnaces with fresh air intake and jump ducts.

Validity of CBM Measures of Oral Reading Fluency and Reading Comprehension on High-Stakes Reading Assessments in Grades 7 and 8

ERIC Educational Resources Information Center

Baker, Doris Luft; Biancarosa, Gina; Park, Bitnara Jasmine; Bousselot, Tracy; Smith, Jean-Louise; Baker, Scott K.; Kame'enui, Edward J.; Alonzo, Julie; Tindal, Gerald

2015-01-01

We examined the criterion validity and diagnostic efficiency of oral reading fluency (ORF), word reading accuracy, and reading comprehension (RC) for students in Grades 7 and 8 taking into account form effects of ORF, time of assessment, and individual differences, including student designations of limited English proficiency and special education…

Literacy Learning of At-Risk First-Grade Students in the Reading Recovery Early Intervention

ERIC Educational Resources Information Center

Schwartz, Robert M.

2005-01-01

This study investigated the effectiveness and efficiency of the Reading Recovery early intervention. At-risk 1st-grade students were randomly assigned to receive the intervention during the 1st or 2nd half of the school year. High-average and low-average students from the same classrooms provided additional comparisons. Thirty-seven teachers from…

Wild Band Edges: The Role of Bandgap Grading and Band-Edge Fluctuations in High-Efficiency Chalcogenide Devices: Preprint

DOE Office of Scientific and Technical Information (OSTI.GOV)

Repins, Ingrid; Mansfield, Lorelle; Kanevce, Ana

Band-edge effects -- including grading, electrostatic fluctuations, bandgap fluctuations, and band tails -- affect chalcogenide device efficiency. These effects now require more careful consideration as efficiencies increase beyond 20%. Several aspects of the relationships between band-edge phenomena and device performance for NREL absorbers are examined. For Cu(In,Ga)Se2 devices, recent increases in diffusion length imply changes to optimum bandgap profile. The origin, impact, and modification of electrostatic and bandgap fluctuations are also discussed. The application of the same principles to devices based on CdTe, kesterites, and emerging absorbers (Cu2SnS3, CuSbS2), considering differences in materials properties and defect formation energies, is examined.

Osmotic Heat Engine Using Thermally Responsive Ionic Liquids.

PubMed

Zhong, Yujiang; Wang, Xinbo; Feng, Xiaoshuang; Telalovic, Selvedin; Gnanou, Yves; Huang, Kuo-Wei; Hu, Xiao; Lai, Zhiping

2017-08-15

The osmotic heat engine (OHE) is a promising technology for converting low grade heat to electricity. Most of the existing studies have focused on thermolytic salt systems. Herein, for the first time, we proposed to use thermally responsive ionic liquids (TRIL) that have either an upper critical solution temperature (UCST) or lower critical solution temperature (LCST) type of phase behavior as novel thermolytic osmotic agents. Closed-loop TRIL-OHEs were designed based on these unique phase behaviors to convert low grade heat to work or electricity. Experimental studies using two UCST-type TRILs, protonated betaine bis(trifluoromethyl sulfonyl)imide ([Hbet][Tf 2 N]) and choline bis(trifluoromethylsulfonyl)imide ([choline][Tf 2 N]) showed that (1) the specific energy of the TRIL-OHE system could reach as high as 4.0 times that of the seawater and river water system, (2) the power density measured from a commercial FO membrane reached up to 2.3 W/m 2 , and (3) the overall energy efficiency reached up to 2.6% or 18% of the Carnot efficiency at no heat recovery and up to 10.5% or 71% of the Carnet efficiency at 70% heat recovery. All of these results clearly demonstrated the great potential of using TRILs as novel osmotic agents to design high efficient OHEs for recovery of low grade thermal energy to work or electricity.

Contribution of Road Grade to the Energy Use of Modern Automobiles Across Large Datasets of Real-World Drive Cycles: Preprint

DOE Office of Scientific and Technical Information (OSTI.GOV)

Wood, E.; Burton, E.; Duran, A.

Understanding the real-world power demand of modern automobiles is of critical importance to engineers using modeling and simulation to inform the intelligent design of increasingly efficient powertrains. Increased use of global positioning system (GPS) devices has made large scale data collection of vehicle speed (and associated power demand) a reality. While the availability of real-world GPS data has improved the industry's understanding of in-use vehicle power demand, relatively little attention has been paid to the incremental power requirements imposed by road grade. This analysis quantifies the incremental efficiency impacts of real-world road grade by appending high fidelity elevation profiles tomore » GPS speed traces and performing a large simulation study. Employing a large real-world dataset from the National Renewable Energy Laboratory's Transportation Secure Data Center, vehicle powertrain simulations are performed with and without road grade under five vehicle models. Aggregate results of this study suggest that road grade could be responsible for 1% to 3% of fuel use in light-duty automobiles.« less

Improving the Efficiency and Effectiveness of Grading through the Use of Computer-Assisted Grading Rubrics

ERIC Educational Resources Information Center

Anglin, Linda; Anglin, Kenneth; Schumann, Paul L.; Kaliski, John A.

2008-01-01

This study tests the use of computer-assisted grading rubrics compared to other grading methods with respect to the efficiency and effectiveness of different grading processes for subjective assignments. The test was performed on a large Introduction to Business course. The students in this course were randomly assigned to four treatment groups…

Utilization of non-weapons-grade plutonium and highly enriched uranium with breeding of the {sup 233}U isotope in the VVER reactors using thorium and heavy water

DOE Office of Scientific and Technical Information (OSTI.GOV)

Marshalkin, V. E., E-mail: marshalkin@vniief.ru; Povyshev, V. M.

A method for joint utilization of non-weapons-grade plutonium and highly enriched uranium in the thorium–uranium—plutonium oxide fuel of a water-moderated reactor with a varying water composition (D{sub 2}O, H{sub 2}O) is proposed. The method is characterized by efficient breeding of the {sup 233}U isotope and safe reactor operation and is comparatively simple to implement.

Explosion-assisted preparation of dispersed gold-bearing different-grade ore for selective mining

NASA Astrophysics Data System (ADS)

Trubachev, AI; Zykov, NV

2017-02-01

It is found that there are transient zones (between quality and off-quality ore areas) with the respective content of useful component in an ore body, and a variant of explosive treatment of such zones before the selective mining is put forward. Practicability of two processing technologies is evaluated: processing of high-grade and low-grade ore from the transient zones and heap leaching of metals from the low-grade and impoverished ore. Open mining technology is conventional truck-and-shovel scheme, with distributed ore flows to processing plant and (or) to heap leaching, which generally enhances the mine efficiency.

Graded recombination layers for multijunction photovoltaics.

PubMed

Koleilat, Ghada I; Wang, Xihua; Sargent, Edward H

2012-06-13

Multijunction devices consist of a stack of semiconductor junctions having bandgaps tuned across a broad spectrum. In solar cells this concept is used to increase the efficiency of photovoltaic harvesting, while light emitters and detectors use it to achieve multicolor and spectrally tunable behavior. In series-connected current-matched multijunction devices, the recombination layers must allow the hole current from one cell to recombine, with high efficiency and low voltage loss, with the electron current from the next cell. We recently reported a tandem solar cell in which the recombination layer was implemented using a progression of n-type oxides whose doping densities and work functions serve to connect, with negligible resistive loss at solar current densities, the constituent cells. Here we present the generalized conditions for design of efficient graded recombination layer solar devices. We report the number of interlayers and the requirements on work function and doping of each interlayer, to bridge an work function difference as high as 1.6 eV. We also find solutions that minimize the doping required of the interlayers in order to minimize optical absorption due to free carriers in the graded recombination layer (GRL). We demonstrate a family of new GRL designs experimentally and highlight the benefits of the progression of dopings and work functions in the interlayers.

Systems Engineering Methodology for Fuel Efficiency and its Application to the TARDEC Fuel Efficient Demonstrator (FED) Program

DTIC Science & Technology

2010-08-19

highlight the benefits of regenerative braking . Parameters within the drive cycle may include vehicle speed, elevation/grade changes, road surface...assist to downsize the engine due to infinite maximum speed requirements • Drive cycle less suited to regenerative braking improvement compared to...will be cycle dependent. A high speed drive cycle may for example drive a focus on aerodynamic improvements, while high frequency of braking will

The association between higher body mass index and poor school performance in high school students.

PubMed

Tonetti, L; Fabbri, M; Filardi, M; Martoni, M; Natale, V

2016-12-01

This study aimed to examine the association between body mass index (BMI) and school performance in high school students by controlling for relevant mediators such as sleep quality, sleep duration and socioeconomic status. Thirty-seven high school students (mean age: 18.16 ± 0.44 years) attending the same school type, i.e. 'liceo scientifico' (science-based high school), were enrolled. Students' self-reported weight and height were used to calculate BMI. Participants wore an actigraph to objectively assess the quality and duration of sleep. School performance was assessed through the actual grade obtained at the final school-leaving exam, in which higher grades indicate higher performance. BMI, get-up time, mean motor activity, wake after sleep onset and number of awakenings were negatively correlated with the grade, while sleep efficiency was positively correlated. When performing a multiple regression analysis, BMI proved the only significant (negative) predictor of grade. When controlling for sleep quality, sleep duration and socioeconomic status, a higher BMI is associated with a poorer school performance in high school students. © 2015 World Obesity Federation.

High bandgap III-V alloys for high efficiency optoelectronics

DOEpatents

Alberi, Kirstin; Mascarenhas, Angelo; Wanlass, Mark

2017-01-10

High bandgap alloys for high efficiency optoelectronics are disclosed. An exemplary optoelectronic device may include a substrate, at least one Al.sub.1-xIn.sub.xP layer, and a step-grade buffer between the substrate and at least one Al.sub.1-xIn.sub.xP layer. The buffer may begin with a layer that is substantially lattice matched to GaAs, and may then incrementally increase the lattice constant in each sequential layer until a predetermined lattice constant of Al.sub.1-xIn.sub.xP is reached.

Arsine flow requirement for the flow modulation growth of high purity GaAs using adduct-grade triethylgallium

NASA Astrophysics Data System (ADS)

Pitts, B. L.; Emerson, D. T.; Shealy, J. R.

1992-10-01

Using arsine and triethylgallium with flow modulation, organometallic vapor phase epitaxy can produce high purity GaAs layers with V/III molar ratios near unity. We have estimated that under appropriate growth conditions the arsine incorporation efficiency into epitaxial GaAs can exceed 30%. The arsine flow requirement for obtaining good morphology has been identified over a range of substrate temperatures using adduct-grade triethylgallium. The process described reduces the environmental impact and life safety risk of the hydride based organometallic vapor phase epitaxial method.

High efficiency graphene coated copper based thermocells connected in series

NASA Astrophysics Data System (ADS)

Sindhuja, Mani; Indubala, Emayavaramban; Sudha, Venkatachalam; Harinipriya, Seshadri

2018-04-01

Conversion of low-grade waste heat into electricity had been studied employing single thermocell or flowcells so far. Graphene coated copper electrodes based thermocells connected in series displayed relatively high efficiency of thermal energy harvesting. The maximum power output of 49.2W/m2 for normalized cross sectional electrode area is obtained at 60ºC of inter electrode temperature difference. The relative carnot efficiency of 20.2% is obtained from the device. The importance of reducing the mass transfer and ion transfer resistance to improve the efficiency of the device is demonstrated. Degradation studies confirmed mild oxidation of copper foil due to corrosion caused by the electrolyte.

The mineralogy of bauxite for producing smelter-grade alumina

NASA Astrophysics Data System (ADS)

Authier-Martin, M.; Forte, G.; Ostap, S.; See, J.

2001-12-01

Aluminum-producing companies rely on low-cost, high-purity, smelter-grade alumina (aluminum oxide), and alumina production utilizes the bulk of bauxites mined world-wide. The mineralogy of the bauxites has a significant impact on the operation of the Bayer process for alumina production. Typically, the Bayer process produces smelter-grade alumina of 99.5% Al2O3, starting from bauxite containing 30% to 60% Al2O3. The main objective of the Bayer process is to extract the maximum amount of aluminum from the bauxite at as high an aluminate concentration in solution as possible, while limiting any troublesome side reactions. Only with a better understanding of the chemistry of the mineral species and a strict control of the operating/processing conditions can the Bayer process produce efficiently, a low cost, high-quality alumina with minimum detrimental environmental impact.

GaAs Solar Cells on V-Grooved Silicon via Selective Area Growth: Preprint

DOE Office of Scientific and Technical Information (OSTI.GOV)

Warren, Emily L; Jain, Nikhil; Tamboli, Adele C

Interest in integrating III-Vs onto Si has recently resurged as a promising pathway towards high-efficiency, low-cost tandem photovoltaics. Here, we present a single junction GaAs solar cell grown monolithically on polished Si (001) substrates using V-grooves, selective area growth, and aspect ratio trapping to mitigate defect formation without the use of expensive, thick graded buffers. The GaAs is free of antiphase domains and maintains a relatively low TDD of 4x107 cm-2, despite the lack of a graded buffer. This 6.25 percent-efficient demonstration solar cell shows promise for further improvements to III-V/Si tandems to enable cost-competitive photovoltaics.

Efficient High-Fidelity, Geometrically Exact, Multiphysics Structural Models

DTIC Science & Technology

2011-10-14

fuctionally graded core. International Journal for Numerical Methods in Engineering, 68:940– 966, 2006. 7F. Shang, Z. Wang, and Z. Li. Analysis of...normal deformable plate theory and MLPG method with radial basis fuctions . Composite Structures, 80:539– 552, 2007. 17W. Zhen and W. Chen. A higher-order...functionally graded plates by using higher-order shear and normal deformable plate theory and MLPG method with radial basis fuctions . Composite Structures, 80

Jupyter Notebooks as tools for interactive learning of Concepts in Structural Geology and efficient grading of exercises.

NASA Astrophysics Data System (ADS)

Niederau, Jan; Wellmann, Florian; Maersch, Jannik; Urai, Janos

2017-04-01

Programming is increasingly recognised an important skill for geoscientists - however, the hurdle to jump into programming for students with little or no experience can be high. We present here teaching concepts on the basis of Jupyter notebooks that combine, in an intuitive way, formatted instruction text with code cells in a single environment. This integration allows for an exposure to programming on several levels: from a complete interactive presentation of content, where students require no or very limited programming experience, to highly complex geoscientific computations. We consider these notebooks therefore as an ideal medium to present computational content to students in the field of geosciences. We show here how we use these notebooks to develop digital documents in Python for undergrad-students, who can then learn about basic concepts in structural geology via self-assessment. Such notebooks comprise concepts such as: stress tensor, strain ellipse, or the mohr circle. Students can interactively change parameters, e.g. by using sliders and immediately see the results. They can further experiment and extend the notebook by writing their own code within the notebook. Jupyter Notebooks for teaching purposes can be provided ready-to-use via online services. That is, students do not need to install additional software on their devices in order to work with the notebooks. We also use Jupyter Notebooks for automatic grading of programming assignments in multiple lectures. An implemented workflow facilitates the generation, distribution of assignments, as well as the final grading. Compared to previous grading methods with a high percentage of repetitive manual grading, the implemented workflow proves to be much more time efficient.

Industrial based volume manufacturing of lightweight aluminium alloy panel components with high-strength and complex-shape for car body and chassis structures

NASA Astrophysics Data System (ADS)

Anyasodor, Gerald; Koroschetz, Christian

2017-09-01

To achieve the high volume manufacture of lightweight passenger cars at economic cost as required in the automotive industry, low density materials and new process route will be needed. While high strength aluminium alloy grades: AA7075 and AA6082 may provide the alternative material solution, hot stamping process used for high-strength and ultrahigh strength steels such as boron steel 22mnb5 can enable the volume manufacture of panel components with high-strength and complex-shape for car body and chassis structures. These aluminium alloy grades can be used to manufacture panel components with possible yield strengths ≥ 500 MPa. Due to the differences in material behaviors, hot stamping process of 22mnb5 cannot be directly applied to high strength aluminium alloy grades. Despite recorded successes in laboratories, researches and niche hot forming processes of high strength aluminium alloy grades, not much have been achieved for adequate and efficient volume manufacturing system applicable in the automotive industry. Due to lack of such system and based on expert knowledge in hot stamping production-line, AP&T presents in this paper a hot stamping processing route for high strength aluminium alloys been suitable for production-line development and volume manufacturing.

Forming high efficiency silicon solar cells using density-graded anti-reflection surfaces

DOEpatents

Yuan, Hao-Chih; Branz, Howard M.; Page, Matthew R.

2014-09-09

A method (50) is provided for processing a graded-density AR silicon surface (14) to provide effective surface passivation. The method (50) includes positioning a substrate or wafer (12) with a silicon surface (14) in a reaction or processing chamber (42). The silicon surface (14) has been processed (52) to be an AR surface with a density gradient or region of black silicon. The method (50) continues with heating (54) the chamber (42) to a high temperature for both doping and surface passivation. The method (50) includes forming (58), with a dopant-containing precursor in contact with the silicon surface (14) of the substrate (12), an emitter junction (16) proximate to the silicon surface (14) by doping the substrate (12). The method (50) further includes, while the chamber is maintained at the high or raised temperature, forming (62) a passivation layer (19) on the graded-density silicon anti-reflection surface (14).

Forming high-efficiency silicon solar cells using density-graded anti-reflection surfaces

DOEpatents

Yuan, Hao-Chih; Branz, Howard M.; Page, Matthew R.

2015-07-07

A method (50) is provided for processing a graded-density AR silicon surface (14) to provide effective surface passivation. The method (50) includes positioning a substrate or wafer (12) with a silicon surface (14) in a reaction or processing chamber (42). The silicon surface (14) has been processed (52) to be an AR surface with a density gradient or region of black silicon. The method (50) continues with heating (54) the chamber (42) to a high temperature for both doping and surface passivation. The method (50) includes forming (58), with a dopant-containing precursor in contact with the silicon surface (14) of the substrate (12), an emitter junction (16) proximate to the silicon surface (14) by doping the substrate (12). The method (50) further includes, while the chamber is maintained at the high or raised temperature, forming (62) a passivation layer (19) on the graded-density silicon anti-reflection surface (14).

A graded catalytic–protective layer for an efficient and stable water-splitting photocathode

DOE PAGES

Gu, Jing; Aguiar, Jeffery A.; Ferrere, Suzanne; ...

2017-01-09

Achieving solar-to-hydrogen efficiencies above 15% is key for the commercial success of photoelectrochemical water splitting devices. While tandem cells can reach those efficiencies, increasing the catalytic activity and long-term stability remains a significant challenge. We show that annealing a bilayer of amorphous titanium dioxide (TiO x) and molybdenum sulfide (MoS x) deposited onto GaInP 2 results in a photocathode with high catalytic activity (current density of 11 mA/cm -2 at 0 V vs. the reversible hydrogen electrode under 1 sun illumination) and stability (retention of 80% of initial photocurrent density over a 20 h durability test) for the hydrogen evolutionmore » reaction. Microscopy and spectroscopy reveal that annealing results in a graded MoS x/MoO x/TiO 2 layer that retains much of the high catalytic activity of amorphous MoS x but with stability similar to crystalline MoS 2. These findings demonstrate the potential of utilizing a hybridized, heterogeneous surface layer as a cost-effective catalytic and protective interface for solar hydrogen production.« less

Cos-Gaussian modal field of a terahertz rectangular metal waveguide filled with multiple slices of dielectric

NASA Astrophysics Data System (ADS)

Wang, Kai; Cao, Qing; Zhang, Huifang; Shen, Pengcheng; Xing, Lujing

2018-06-01

Based on the TE01 mode of a rectangular metal waveguide and the Gaussian mode of a fiber, we propose the cos-Gaussian mode of a terahertz rectangular metal waveguide filled with multiple slices of dielectric. First, we consider a rectangular metal waveguide filled with an ideal graded-index dielectric along one direction. Furthermore, we replace the graded-index dielectric with multiple slices of dielectric according to the effective medium theory. The modal field, the effective index, and the coupling efficiency of this waveguide are investigated. It is found that the approximately linearly polarized electric field is Gaussian along one dimensionality and cosine along the other one. In addition, the low loss and high coupling efficiency with a Gaussian beam can be acquired at 0.9 THz. By optimization, the coupling efficiency could reach 88.5%.

Charging-free electrochemical system for harvesting low-grade thermal energy

PubMed Central

Yang, Yuan; Lee, Seok Woo; Ghasemi, Hadi; Loomis, James; Li, Xiaobo; Kraemer, Daniel; Zheng, Guangyuan; Cui, Yi; Chen, Gang

2014-01-01

Efficient and low-cost systems are needed to harvest the tremendous amount of energy stored in low-grade heat sources (<100 °C). Thermally regenerative electrochemical cycle (TREC) is an attractive approach which uses the temperature dependence of electrochemical cell voltage to construct a thermodynamic cycle for direct heat-to-electricity conversion. By varying temperature, an electrochemical cell is charged at a lower voltage than discharge, converting thermal energy to electricity. Most TREC systems still require external electricity for charging, which complicates system designs and limits their applications. Here, we demonstrate a charging-free TREC consisting of an inexpensive soluble Fe(CN)63−/4− redox pair and solid Prussian blue particles as active materials for the two electrodes. In this system, the spontaneous directions of the full-cell reaction are opposite at low and high temperatures. Therefore, the two electrochemical processes at both low and high temperatures in a cycle are discharge. Heat-to-electricity conversion efficiency of 2.0% can be reached for the TREC operating between 20 and 60 °C. This charging-free TREC system may have potential application for harvesting low-grade heat from the environment, especially in remote areas. PMID:25404325

Enhanced pinning in superconducting thin films with graded pinning landscapes

NASA Astrophysics Data System (ADS)

Motta, M.; Colauto, F.; Ortiz, W. A.; Fritzsche, J.; Cuppens, J.; Gillijns, W.; Moshchalkov, V. V.; Johansen, T. H.; Sanchez, A.; Silhanek, A. V.

2013-05-01

A graded distribution of antidots in superconducting a-Mo79Ge21 thin films has been investigated by magnetization and magneto-optical imaging measurements. The pinning landscape has maximum density at the sample border, decreasing linearly towards the center. Its overall performance is noticeably superior than that for a sample with uniformly distributed antidots: For high temperatures and low fields, the critical current is enhanced, whereas the region of thermomagnetic instabilities in the field-temperature diagram is significantly suppressed. These findings confirm the relevance of graded landscapes on the enhancement of pinning efficiency, as recently predicted by Misko and Nori [Phys. Rev. B 85, 184506 (2012)].

Nonimaging optical concentrators using graded-index dielectric.

PubMed

Zitelli, M

2014-04-01

A new generation of inhomogeneous nonimaging optical concentrators is proposed, able to achieve simultaneously high optical efficiency and acceptance solid angle at a given geometrical concentration factor. General design methods are given, and concentrators are numerically investigated and optimized.

Modeling of defect tolerance of IMM multijunction photovoltaics for space application

NASA Astrophysics Data System (ADS)

Mehrotra, Akhil; Freundlich, Alex

2013-03-01

Reduction of defects by use of thick sophisticated graded metamorphic buffers in inverted metamorphic solar cells has been a requirement to obtain high efficiency devices. With increase in number of metamorphic junctions to obtain higher efficiencies, these graded buffers constitute a significant part of growth time and cost for manufacturer of the solar cells. It's been shown that ultrathin 3 and 4 junction IMM devices perform better in presence of dislocations or/and radiation harsh environment compared to conventional thick IMM devices. Thickness optimization of the device would result in better defect and radiation tolerant behavior of 0.7ev and 1.0ev InGaAs sub-cells which would in turn require thinner buffers with higher efficiencies, hence reducing the total device thickness. It is also shown that for 3 and 4 junc. IMM, with an equivalent 1015 cm-2 1 MeV electron fluence radiation, very high EOL efficiencies can be afforded with substantially higher dislocation densities (<2×107 cm-2) than those commonly perceived as acceptable for IMM devices with remaining power factor as high as 0.85. The irregular radiation degradation behavior in 4-junc IMM is also explained by back photon reflection from gold contacts and reduced by using thickness optimization of 0.7ev and 1.0ev InGaAs sub-cells.

Efficient III-Nitride MIS-HEMT devices with high-κ gate dielectric for high-power switching boost converter circuits

NASA Astrophysics Data System (ADS)

Mohanbabu, A.; Mohankumar, N.; Godwin Raj, D.; Sarkar, Partha; Saha, Samar K.

2017-03-01

The paper reports the results of a systematic theoretical study on efficient recessed-gate, double-heterostructure, and normally-OFF metal-insulator-semiconductor high-electron mobility transistors (MIS-HEMTs), HfAlOx/AlGaN on Al2O3 substrate. In device architecture, a thin AlGaN layer is used in the AlGaN graded barrier MIS-HEMTs that offers an excellent enhancement-mode device operation with threshold voltage higher than 5.3 V and drain current above 0.64 A/mm along with high on-current/off-current ratio over 107 and subthreshold slope less than 73 mV/dec. In addition, a high OFF-state breakdown voltage of 1200 V is achieved for a device with a gate-to-drain distance and field-plate length of 15 μm and 5.3 μm, respectively at a drain current of 1 mA/mm with a zero gate bias, and the substrate grounded. The numerical device simulation results show that in comparison to a conventional AlGaN/GaN MIS-HEMT of similar design, a graded barrier MIS-HEMT device exhibits a better interface property, remarkable suppression of leakage current, and a significant improvement of breakdown voltage for HfAlOx gate dielectric. Finally, the benefit of HfAlOx graded-barrier AlGaN MIS-HEMTs based switching devices is evaluated on an ultra-low-loss converter circuit.

In-class use of clickers and clicker tests improve learning and enable instant feedback and retests via automated grading

NASA Astrophysics Data System (ADS)

Burnham, Nancy A.; Kadam, Snehalata V.; DeSilva, Erin

2017-11-01

An audience response system (‘clickers’) was gradually incorporated into introductory physics courses at Worcester Polytechnic Institute during the years 2011-14. Clickers were used in lectures, as a means of preparing for labs, and for collection of exam data and grading. Average student grades were 13.5% greater, as measured by comparing exam results with a previous year. Student acceptance of clickers was high, ranging from 66% to 95%, and grading time for exams was markedly reduced, from a full day to a few hours for approximately 150 students. The streamlined grading allowed for a second test on the same material for the students who failed the first one. These improvements have the immediate effects of engagement, learning, and efficiency, and ideally, they will also provide an environment in which more students will succeed in college and their careers.

A high-efficiency thermoelectric converter for space applications

DOE Office of Scientific and Technical Information (OSTI.GOV)

Metzger, J.D.; El-Genk, M.S.

1990-01-01

This paper presents a concept for using high-temperature superconducting materials in thermoelectric generators (SCTE) to produce electricity at conversion efficiencies approaching 50% of the Carrot efficiency. The SCTE generator is applicable to systems operating in temperature ranges of high-temperature superconducting materials and thus would be a low-grade converter. Operating in cryogenic temperature ranges provides the advantage of inherently increasing the limits of the Carrot efficiency. Potential applications are for systems operating in space where the ambient temperatures are in the cryogenic temperature range. The advantage of using high-temperature superconducting material in a thermoelectric converter is that it would significantly reducemore » or eliminate the Joule heating losses in a thermoelectric element. This paper investigates the system aspects and the material requirements of the SCTE converter concept, and presents a conceptual design and an application for a space power system.« less

A high-efficiency thermoelectric converter for space applications

DOE Office of Scientific and Technical Information (OSTI.GOV)

Metzger, J.D.; El-Genk, M.S.

1990-12-31

This paper presents a concept for using high-temperature superconducting materials in thermoelectric generators (SCTE) to produce electricity at conversion efficiencies approaching 50% of the Carrot efficiency. The SCTE generator is applicable to systems operating in temperature ranges of high-temperature superconducting materials and thus would be a low-grade converter. Operating in cryogenic temperature ranges provides the advantage of inherently increasing the limits of the Carrot efficiency. Potential applications are for systems operating in space where the ambient temperatures are in the cryogenic temperature range. The advantage of using high-temperature superconducting material in a thermoelectric converter is that it would significantly reducemore » or eliminate the Joule heating losses in a thermoelectric element. This paper investigates the system aspects and the material requirements of the SCTE converter concept, and presents a conceptual design and an application for a space power system.« less

[Surgical methods of abortion].

PubMed

Linet, T

2016-12-01

A state of the art of surgical method of abortion focusing on safety and practical aspects. A systematic review of French-speaking or English-speaking evidence-based literature about surgical methods of abortion was performed using Pubmed, Cochrane and international recommendations. Surgical abortion is efficient and safe regardless of gestational age, even before 7 weeks gestation (EL2). A systematic prophylactic antibiotics should be preferred to a targeted antibiotic prophylaxis (grade A). In women under 25 years, doxycycline is preferred (grade C) due to the high prevalence of Chlamydia trachomatis. Systematic cervical preparation is recommended for reducing the incidence of complications from vacuum aspiration (grade A). Misoprostol is a first-line agent (grade A). When misoprostol is used before a vacuum aspiration, a dose of 400 mcg is recommended. The choice of vaginal route or sublingual administration should be left to the woman: (i) the vaginal route 3 hours before the procedure has a good efficiency/safety ratio (grade A); (ii) the sublingual administration 1 to 3 hours before the procedure has a higher efficiency (EL1). The patient should be warned of more common gastrointestinal side effects. The addition of mifepristone 200mg 24 to 48hours before the procedure is interesting for pregnancies between 12 and 14 weeks gestations (EL2). The systematic use of nonsteroidal anti-inflammatory drugs is recommended for limiting the operative and postoperative pain (grade B). Routine vaginal application of an antiseptic prior to the procedure cannot be recommended (grade B). The type of anesthesia (general or local) should be left up to the woman after explanation of the benefit-risk ratio (grade B). Paracervical local anesthesia (PLA) is recommended before performing a vacuum aspiration under local anesthesia (grade A). The electric or manual vacuum methods are very effective, safe and acceptable to women (grade A). Before 9 weeks gestation, the manual vacuum aspiration could have a subjective interest (grade B). The electric vacuum aspiration is recommended after 9 weeks gestation (best practice agreement). For a pregnancy of unknown location, the success of the procedure can reasonably be determined if hCG drops more than 50 % on day 5 and 80 % on day 7 (NP3). After a surgical abortion, paracetamol or addition of paracetamol and codeine is not recommended (grade B). Copyright © 2016. Published by Elsevier Masson SAS.

Highly efficient pseudomorphic InGaAs/GaAs/AlGaAs single quantum well lasers for monolithic integration

NASA Technical Reports Server (NTRS)

Larsson, A.; Cody, J.; Forouhar, S.; Lang, R. J.

1990-01-01

Highly efficient ridge waveguide pseudomorphic single quantum well lasers, emitting at 980 nm, have been fabricated from an In(0.2)Ga(0.8)As/GaAs/AlGaAs graded-index separate confinement heterostructure grown by molecular beam epitaxy. The laterial index guiding provided by the ridge reduces the anomalously large lateral loss of optical power found in gain-guided structures, thereby reducing the internal loss by more than 50 percent. The low threshold current (7.6 mA) and high differential quantum efficiency (79 percent) obtained under continuous operation as well as the transparency of the GaAs substrate to the emitted radiation render these lasers attractive for Ga-As-based optoelectronic integration.

LEARNING EFFICIENCY AS A FUNCTION OF DEPICTION, VERBALIZATION, GRADE AND SOCIAL CLASS.

ERIC Educational Resources Information Center

ROHWER, WILLIAM D., JR.; AND OTHERS

LEARNING EFFICIENCY AS A FUNCTION OF DEPICTION, VERBALIZATION, GRADE LEVEL, AND SOCIAL CLASS WAS EXPLORED BY ASKING 384 KINDERGARTEN, FIRST-, THIRD-, AND SIXTH-GRADE CHILDREN FROM BOTH MIDDLE-CLASS AND LOWER-CLASS AREAS TO LEARN A LIST OF 24 PAIRED ASSOCIATES. ALL PAIRS WERE PRESENTED PICTORIALLY BY A STUDY-TEST METHOD FOR TWO LEARNING TRIALS. THE…

Diagnostic performance of 68Gallium-PSMA-11 PET/CT to detect significant prostate cancer and comparison with 18FEC PET/CT.

PubMed

Hoffmann, Manuela A; Miederer, Matthias; Wieler, Helmut J; Ruf, Christian; Jakobs, Frank M; Schreckenberger, Mathias

2017-12-19

Radiolabeled prostate-specific membrane antigen (PSMA) has proven to be a highly accurate method to detect recurrence and metastases of prostate cancer, but only sparse data is available about its performance in the diagnosis of clinically significant primary prostate cancer. We compared 68 Ga-PSMA-11 PET/CT in 25 patients with 18 FEC PET/CT in 40 patients with suspected prostate carcinoma based on an increased PSA level.The PET/CT results were compared with the histopathologic Gleason Score (GS) of biopsies. The 68 Ga-PSMA-11 PET/CT revealed highly suspect prostatic lesions (maximum standardized uptake value/SUV max >2.5) in 21/25 patients (84%), associated with GS≥6 (low-grade/high-grade carcinoma). Two histopathologic non-malignancy-relevant cases (GS<6) had PSMA-SUV max ≤2.5; all histopathologic high-grade cases (GS≥7b) showed PSMA-SUV max >12.0 which further increased with rising GS. There were 2 false positives and no false negative findings for high-grade prostate cancer using a cut off-level for SUV max of 2.5.In contrast, the 18 FEC PET/CT showed suspected malignant lesions in 38/40 patients (95%), which included 3 lesions with GS<6. The mean SUV max values did not differ with different GS. There were 11 false positives and 1 false negative for detection of high-grade prostate cancer (cut off 2.5).By means of ROC analysis a SUV max of 5.4 was found to be an optimal cut off-level to distinguish between low- and high-grade carcinoma in 68 Ga-PSMA-11 PET/CT (AUC=0.9692; 95% CI 0.9086;1.0000;SD(AUC)=0.0309)). Choosing a cut off-level of SUV max 5.4, 68 Ga-PSMA-11 PET/CT was able to distinguish between GS ≤7a/≥7b with a sensitivity of 84%, a specificity of 100%, a negative predictive value (NPV) of 67%, and an efficiency of 88% ( p <0.001).The ROC analysis revealed a SUV max 6.5 as an optimal cut off-level to distinguish between low- and high-grade carcinoma in 18 FEC PET/CT (AUC=0.7470; 95% CI 0.5919;0.9020;SD(AUC)=0.0791) with a sensitivity of 61% and a specificity of 92%; but the efficiency was only 70% and the NPV 50% ( p =0.01). 68 Ga-PSMA-11 PET/CT guided biopsy of the prostate increases diagnostic precision and is likely to help to reduce overtreatment of low-grade malignant disease as well as detect the foci of the highest Gleason pattern. Both methods ( 68 Ga-PSMA-11, 18 FEC) were suitable to detect primary prostate cancer, but the excellent image quality, the higher specificity and the good correlation of positive scans with GS are advantages of 68 Ga-PSMA-11.

Continuous-Flow System Produces Medical-Grade Water

NASA Technical Reports Server (NTRS)

Akse, James R.; Dahl, Roger W.; Wheeler, Richard R.

2009-01-01

A continuous-flow system utilizes microwave heating to sterilize water and to thermally inactivate endotoxins produced in the sterilization process. The system is designed for use in converting potable water to medical-grade water. Systems like this one could be used for efficient, small-scale production of medical- grade water in laboratories, clinics, and hospitals. This system could be adapted to use in selective sterilization of connections in ultra-pure-water-producing equipment and other equipment into which intrusion by microorganisms cannot be tolerated. Lightweight, port - able systems based on the design of this system could be rapidly deployed to remote locations (e.g., military field hospitals) or in response to emergencies in which the normal infrastructure for providing medical-grade water is disrupted. Larger systems based on the design of this system could be useful for industrial production of medical-grade water. The basic microwave-heating principle of this system is the same as that of a microwave oven: An item to be heated, made of a lossy dielectric material (in this case, flowing water) is irradiated with microwaves in a multimode microwave cavity. The heating is rapid and efficient because it results from absorption of microwave power throughout the volume of the lossy dielectric material. In this system, a copper tube having a length of 49.5 cm and a diameter of 2.25 cm serves as both the microwave cavity and the sterilization chamber. Microwave power is fed via a coaxial cable to an antenna mounted inside the tube at mid-length (see figure). Efficient power transfer occurs due to the shift in wavelength associated with the high permittivity of water combined with the strong coupling of 2.45-GHz microwaves with rotational-vibrational transitions of the dipolar water molecule.

Direct solar-to-hydrogen conversion via inverted metamorphic multi-junction semiconductor architectures

DOE PAGES

Young, James L.; Steiner, Myles A.; Döscher, Henning; ...

2017-03-13

Solar water splitting via multi-junction semiconductor photoelectrochemical cells provides direct conversion of solar energy to stored chemical energy as hydrogen bonds. Economical hydrogen production demands high conversion efficiency to reduce balance-of-systems costs. For sufficient photovoltage, water-splitting efficiency is proportional to the device photocurrent, which can be tuned by judicious selection and integration of optimal semiconductor bandgaps. Here, we demonstrate highly efficient, immersed water-splitting electrodes enabled by inverted metamorphic epitaxy and a transparent graded buffer that allows the bandgap of each junction to be independently varied. Voltage losses at the electrolyte interface are reduced by 0.55 V over traditional, uniformly p-dopedmore » photocathodes by using a buried p-n junction. Lastly, advanced on-sun benchmarking, spectrally corrected and validated with incident photon-to-current efficiency, yields over 16% solar-to-hydrogen efficiency with GaInP/GaInAs tandem absorbers, representing a 60% improvement over the classical, high-efficiency tandem III-V device.« less

Direct solar-to-hydrogen conversion via inverted metamorphic multi-junction semiconductor architectures

DOE Office of Scientific and Technical Information (OSTI.GOV)

Young, James L.; Steiner, Myles A.; Döscher, Henning

Solar water splitting via multi-junction semiconductor photoelectrochemical cells provides direct conversion of solar energy to stored chemical energy as hydrogen bonds. Economical hydrogen production demands high conversion efficiency to reduce balance-of-systems costs. For sufficient photovoltage, water-splitting efficiency is proportional to the device photocurrent, which can be tuned by judicious selection and integration of optimal semiconductor bandgaps. Here, we demonstrate highly efficient, immersed water-splitting electrodes enabled by inverted metamorphic epitaxy and a transparent graded buffer that allows the bandgap of each junction to be independently varied. Voltage losses at the electrolyte interface are reduced by 0.55 V over traditional, uniformly p-dopedmore » photocathodes by using a buried p-n junction. Lastly, advanced on-sun benchmarking, spectrally corrected and validated with incident photon-to-current efficiency, yields over 16% solar-to-hydrogen efficiency with GaInP/GaInAs tandem absorbers, representing a 60% improvement over the classical, high-efficiency tandem III-V device.« less

Identification of the Propionicin F Bacteriocin Immunity Gene (pcfI) and Development of a Food-Grade Cloning System for Propionibacterium freudenreichii▿ †

PubMed Central

Brede, Dag Anders; Lothe, Sheba; Salehian, Zhian; Faye, Therese; Nes, Ingolf F.

2007-01-01

This report describes the first functional analysis of a bacteriocin immunity gene from Propionibacterium freudenreichii and its use as a selection marker for food-grade cloning. Cloning of the pcfI gene (previously orf5 [located as part of the pcfABC propionicin F operon]) rendered the sensitive host 1,000-fold more tolerant to the propionicin F bacteriocin. The physiochemical properties of the 127-residue large PcfI protein resemble those of membrane-bound immunity proteins from bacteriocin systems found in lactic acid bacteria. The high level of immunity conferred by pcfI allowed its use as a selection marker for plasmid transformation in P. freudenreichii. Electroporation of P. freudenreichii IFO12426 by use of the pcfI expression plasmid pSL102 and propionicin F selection (200 bacteriocin units/ml) yielded 107 transformants/μg DNA. The 2.7-kb P. freudenreichii food-grade cloning vector pSL104 consists of the pLME108 replicon, a multiple cloning site, and pcfI expressed from the constitutive PpampS promoter for selection. The pSL104 vector efficiently facilitated cloning of the propionicin T1 bacteriocin in P. freudenreichii. High-level propionicin T1 production (640 BU/ml) was obtained with the IFO12426 strain, and the food-grade propionicin T1 expression plasmid pSL106 was maintained by ∼91% of the cells over 25 generations in the absence of selection. To the best of our knowledge this is the first report of an efficient cloning system that facilitates the generation of food-grade recombinant P. freudenreichii strains. PMID:17933941

Identification of the propionicin F bacteriocin immunity gene (pcfI) and development of a food-grade cloning system for Propionibacterium freudenreichii.

PubMed

Brede, Dag Anders; Lothe, Sheba; Salehian, Zhian; Faye, Therese; Nes, Ingolf F

2007-12-01

This report describes the first functional analysis of a bacteriocin immunity gene from Propionibacterium freudenreichii and its use as a selection marker for food-grade cloning. Cloning of the pcfI gene (previously orf5 [located as part of the pcfABC propionicin F operon]) rendered the sensitive host 1,000-fold more tolerant to the propionicin F bacteriocin. The physiochemical properties of the 127-residue large PcfI protein resemble those of membrane-bound immunity proteins from bacteriocin systems found in lactic acid bacteria. The high level of immunity conferred by pcfI allowed its use as a selection marker for plasmid transformation in P. freudenreichii. Electroporation of P. freudenreichii IFO12426 by use of the pcfI expression plasmid pSL102 and propionicin F selection (200 bacteriocin units/ml) yielded 10(7) transformants/microg DNA. The 2.7-kb P. freudenreichii food-grade cloning vector pSL104 consists of the pLME108 replicon, a multiple cloning site, and pcfI expressed from the constitutive P(pampS) promoter for selection. The pSL104 vector efficiently facilitated cloning of the propionicin T1 bacteriocin in P. freudenreichii. High-level propionicin T1 production (640 BU/ml) was obtained with the IFO12426 strain, and the food-grade propionicin T1 expression plasmid pSL106 was maintained by approximately 91% of the cells over 25 generations in the absence of selection. To the best of our knowledge this is the first report of an efficient cloning system that facilitates the generation of food-grade recombinant P. freudenreichii strains.

Design of Reforma 509 with High Strength Steel

NASA Astrophysics Data System (ADS)

Smith, Stuart; Whitby, William; Easton, Marc

Reforma 509 is a high-rise building located in the heart of the Central Business District of Mexico City. The building is comprised of office, hotel, residential and parking and forms part of a cluster of tall buildings in the area. If completed today, Reforma 509 would be the tallest building in Mexico, at 238m. All of the building's gravity and lateral (wind and seismic) loads are carried by an architecturally expressed perimeter frame that is formed from highly efficient Steel Reinforced Concrete (SRC) columns coupled together by steel tube perimeter bracing. This paper investigates the implications of substituting a grade 50 (fy=345 MPa) carbon steel with a higher strength micro-alloyed grade 70 (fy=480 MPa) steel in the design of Reforma 509.

High-efficiency inverted metamorphic 1.7/1.1 eV GaInAsP/GaInAs dual-junction solar cells

NASA Astrophysics Data System (ADS)

Jain, Nikhil; Schulte, Kevin L.; Geisz, John F.; Friedman, Daniel J.; France, Ryan M.; Perl, Emmett E.; Norman, Andrew G.; Guthrey, Harvey L.; Steiner, Myles A.

2018-01-01

Photovoltaic conversion efficiencies of 32.6 ± 1.4% under the AM1.5 G173 global spectrum, and 35.5% ± 1.2% at 38-suns concentration under the direct spectrum, are demonstrated for a monolithic, dual-junction 1.7/1.1 eV solar cell. The tandem cell consists of a 1.7 eV GaInAsP top-junction grown lattice-matched to a GaAs substrate, followed by a metamorphic 1.1 eV GaInAs junction grown on a transparent, compositionally graded metamorphic AlGaInAs buffer. This bandgap combination is much closer to the dual-junction optimum and offers headroom for absolute 3% improvement in efficiency, in comparison to the incumbent lattice-matched GaInP/GaAs (˜1.86/1.41 eV) solar cells. The challenge of growing a high-quality 1.7 eV GaInAsP solar cell is the propensity for phase separation in the GaInAsP alloy. The challenge of lattice-mismatched GaInAs solar cell growth is that it requires minimizing the residual dislocation density during the growth of a transparent compositionally graded buffer to enable efficient metamorphic tandem cell integration. Transmission electron microscopy reveals relatively weak composition fluctuation present in the 1.7 eV GaInAsP alloy, attained through growth control. The threading dislocation density of the GaInAs junction is ˜1 × 106 cm-2, as determined from cathodoluminescence measurements, highlighting the quality of the graded buffer. These material advances have enabled the performance of both junctions to reach over 80% of their Shockley-Queisser limiting efficiencies, with both the subcells demonstrating a bandgap-voltage offset, WOC (=Eg/q-VOC), of ˜0.39 V.

High-efficiency inverted metamorphic 1.7/1.1 eV GaInAsP/GaInAs dual-junction solar cells

DOE PAGES

Jain, Nikhil; Schulte, Kevin L.; Geisz, John F.; ...

2018-01-29

Photovoltaic conversion efficiencies of 32.6 +/- 1.4% under the AM1.5 G173 global spectrum, and 35.5 +/- 1.2% at 38-suns concentration under the direct spectrum, are demonstrated for a monolithic, dual-junction 1.7/1.1 eV solar cell. The tandem cell consists of a 1.7 eV GaInAsP top-junction grown lattice-matched to a GaAs substrate, followed by a metamorphic 1.1 eV GaInAs junction grown on a transparent, compositionally graded metamorphic AlGaInAs buffer. This bandgap combination is much closer to the dual-junction optimum and offers headroom for absolute 3% improvement in efficiency, in comparison to the incumbent lattice-matched GaInP/GaAs (~1.86/1.41 eV) solar cells. The challenge ofmore » growing a high-quality 1.7 eV GaInAsP solar cell is the propensity for phase separation in the GaInAsP alloy. The challenge of lattice-mismatched GaInAs solar cell growth is that it requires minimizing the residual dislocation density during the growth of a transparent compositionally graded buffer to enable efficient metamorphic tandem cell integration. Transmission electron microscopy reveals relatively weak composition fluctuation present in the 1.7 eV GaInAsP alloy, attained through growth control. The threading dislocation density of the GaInAs junction is ~1 x 10^6 cm-2, as determined from cathodoluminescence measurements, highlighting the quality of the graded buffer. These material advances have enabled the performance of both junctions to reach over 80% of their Shockley-Queisser limiting efficiencies, with both the subcells demonstrating a bandgap-voltage offset, WOC (=Eg/q-VOC), of ~0.39 V.« less

High-efficiency inverted metamorphic 1.7/1.1 eV GaInAsP/GaInAs dual-junction solar cells

DOE Office of Scientific and Technical Information (OSTI.GOV)

Jain, Nikhil; Schulte, Kevin L.; Geisz, John F.

Photovoltaic conversion efficiencies of 32.6 +/- 1.4% under the AM1.5 G173 global spectrum, and 35.5 +/- 1.2% at 38-suns concentration under the direct spectrum, are demonstrated for a monolithic, dual-junction 1.7/1.1 eV solar cell. The tandem cell consists of a 1.7 eV GaInAsP top-junction grown lattice-matched to a GaAs substrate, followed by a metamorphic 1.1 eV GaInAs junction grown on a transparent, compositionally graded metamorphic AlGaInAs buffer. This bandgap combination is much closer to the dual-junction optimum and offers headroom for absolute 3% improvement in efficiency, in comparison to the incumbent lattice-matched GaInP/GaAs (~1.86/1.41 eV) solar cells. The challenge ofmore » growing a high-quality 1.7 eV GaInAsP solar cell is the propensity for phase separation in the GaInAsP alloy. The challenge of lattice-mismatched GaInAs solar cell growth is that it requires minimizing the residual dislocation density during the growth of a transparent compositionally graded buffer to enable efficient metamorphic tandem cell integration. Transmission electron microscopy reveals relatively weak composition fluctuation present in the 1.7 eV GaInAsP alloy, attained through growth control. The threading dislocation density of the GaInAs junction is ~1 x 10^6 cm-2, as determined from cathodoluminescence measurements, highlighting the quality of the graded buffer. These material advances have enabled the performance of both junctions to reach over 80% of their Shockley-Queisser limiting efficiencies, with both the subcells demonstrating a bandgap-voltage offset, WOC (=Eg/q-VOC), of ~0.39 V.« less

HIGH PERMEABILITY MEMBRANES FOR THE DEHYDRATION OF LOW WATER CONTENT ETHANOL BY PERVAPORATION

EPA Science Inventory

Energy efficient dehydration of low water content ethanol is a challenge for the sustainable production of fuel-grade ethanol. Pervaporative membrane dehydration using a recently developed hydrophilic polymer membrane formulation consisting of a cross-linked mixture of poly(allyl...

Determining the Return of Energy Efficiency Investments in Domestic and Deployed Military Installations

DTIC Science & Technology

2007-12-01

Ventilation, and Air Conditioning IED Improvised Explosive Device IG DoD Inspector General, Department of Defense IGA Investment Grade Audit JLTV...that certain energy efficient improvements will be achieved (Hansen, 2003). Investment Grade Audit (IGA). Based on the premise that energy...low- grade propane; and a modified diesel engine that can burn gas, ethanol, and diesel fuel in variable proportions (Hamilton, 2007). The TGER

High-efficiency, 154  W CW, diode-pumped Raman fiber laser with brightness enhancement.

PubMed

Glick, Yaakov; Fromzel, Viktor; Zhang, Jun; Ter-Gabrielyan, Nikolay; Dubinskii, Mark

2017-01-20

We demonstrate a high-power, high-efficiency Raman fiber laser pumped directly by laser diode modules at 978 nm. 154 W of CW power were obtained at a wavelength of 1023 nm with an optical to optical efficiency of 65%. A commercial graded-index (GRIN) core fiber acts as the Raman fiber in a power oscillator configuration, which includes spectral selection to prevent generation of the second Stokes. In addition, brightness enhancement of the pump beam by a factor of 8.4 is attained due to the Raman gain distribution profile in the GRIN fiber. To the best of our knowledge this is the highest power and highest efficiency Raman fiber laser demonstrated in any configuration allowing brightness enhancement (i.e., in either cladding-pumped configuration or with GRIN fibers, excluding step-index core pumped), regardless of pumping scheme (i.e., either diode pumped or fiber laser pumped).

The High Costs of Low-Grade Inflammation: Persistent Fatigue as a Consequence of Reduced Cellular-Energy Availability and Non-adaptive Energy Expenditure.

PubMed

Lacourt, Tamara E; Vichaya, Elisabeth G; Chiu, Gabriel S; Dantzer, Robert; Heijnen, Cobi J

2018-01-01

Chronic or persistent fatigue is a common, debilitating symptom of several diseases. Persistent fatigue has been associated with low-grade inflammation in several models of fatigue, including cancer-related fatigue and chronic fatigue syndrome. However, it is unclear how low-grade inflammation leads to the experience of fatigue. We here propose a model of an imbalance in energy availability and energy expenditure as a consequence of low-grade inflammation. In this narrative review, we discuss how chronic low-grade inflammation can lead to reduced cellular-energy availability. Low-grade inflammation induces a metabolic switch from energy-efficient oxidative phosphorylation to fast-acting, but less efficient, aerobic glycolytic energy production; increases reactive oxygen species; and reduces insulin sensitivity. These effects result in reduced glucose availability and, thereby, reduced cellular energy. In addition, emerging evidence suggests that chronic low-grade inflammation is associated with increased willingness to exert effort under specific circumstances. Circadian-rhythm changes and sleep disturbances might mediate the effects of inflammation on cellular-energy availability and non-adaptive energy expenditure. In the second part of the review, we present evidence for these metabolic pathways in models of persistent fatigue, focusing on chronic fatigue syndrome and cancer-related fatigue. Most evidence for reduced cellular-energy availability in relation to fatigue comes from studies on chronic fatigue syndrome. While the mechanistic evidence from the cancer-related fatigue literature is still limited, the sparse results point to reduced cellular-energy availability as well. There is also mounting evidence that behavioral-energy expenditure exceeds the reduced cellular-energy availability in patients with persistent fatigue. This suggests that an inability to adjust energy expenditure to available resources might be one mechanism underlying persistent fatigue.

The High Costs of Low-Grade Inflammation: Persistent Fatigue as a Consequence of Reduced Cellular-Energy Availability and Non-adaptive Energy Expenditure

PubMed Central

Lacourt, Tamara E.; Vichaya, Elisabeth G.; Chiu, Gabriel S.; Dantzer, Robert; Heijnen, Cobi J.

2018-01-01

Chronic or persistent fatigue is a common, debilitating symptom of several diseases. Persistent fatigue has been associated with low-grade inflammation in several models of fatigue, including cancer-related fatigue and chronic fatigue syndrome. However, it is unclear how low-grade inflammation leads to the experience of fatigue. We here propose a model of an imbalance in energy availability and energy expenditure as a consequence of low-grade inflammation. In this narrative review, we discuss how chronic low-grade inflammation can lead to reduced cellular-energy availability. Low-grade inflammation induces a metabolic switch from energy-efficient oxidative phosphorylation to fast-acting, but less efficient, aerobic glycolytic energy production; increases reactive oxygen species; and reduces insulin sensitivity. These effects result in reduced glucose availability and, thereby, reduced cellular energy. In addition, emerging evidence suggests that chronic low-grade inflammation is associated with increased willingness to exert effort under specific circumstances. Circadian-rhythm changes and sleep disturbances might mediate the effects of inflammation on cellular-energy availability and non-adaptive energy expenditure. In the second part of the review, we present evidence for these metabolic pathways in models of persistent fatigue, focusing on chronic fatigue syndrome and cancer-related fatigue. Most evidence for reduced cellular-energy availability in relation to fatigue comes from studies on chronic fatigue syndrome. While the mechanistic evidence from the cancer-related fatigue literature is still limited, the sparse results point to reduced cellular-energy availability as well. There is also mounting evidence that behavioral-energy expenditure exceeds the reduced cellular-energy availability in patients with persistent fatigue. This suggests that an inability to adjust energy expenditure to available resources might be one mechanism underlying persistent fatigue. PMID:29755330

Transparent conductor-embedding nanocones for selective emitters: optical and electrical improvements of Si solar cells

PubMed Central

Kim, Joondong; Yun, Ju-Hyung; Kim, Hyunyub; Cho, Yunae; Park, Hyeong-Ho; Kumar, M. Melvin David; Yi, Junsin; Anderson, Wayne A.; Kim, Dong-Wook

2015-01-01

Periodical nanocone-arrays were employed in an emitter region for high efficient Si solar cells. Conventional wet-etching process was performed to form the nanocone-arrays for a large area, which spontaneously provides the graded doping features for a selective emitter. This enables to lower the electrical contact resistance and enhances the carrier collection due to the high electric field distribution through a nanocone. Optically, the convex-shaped nanocones efficiently reduce light-reflection and the incident light is effectively focused into Si via nanocone structure, resulting in an extremely improved the carrier collection performances. This nanocone-arrayed selective emitter simultaneously satisfies optical and electrical improvement. We report the record high efficiency of 16.3% for the periodically nanoscale patterned emitter Si solar cell. PMID:25787933

Transparent conductor-embedding nanocones for selective emitters: optical and electrical improvements of Si solar cells.

PubMed

Kim, Joondong; Yun, Ju-Hyung; Kim, Hyunyub; Cho, Yunae; Park, Hyeong-Ho; Kumar, M Melvin David; Yi, Junsin; Anderson, Wayne A; Kim, Dong-Wook

2015-03-19

Periodical nanocone-arrays were employed in an emitter region for high efficient Si solar cells. Conventional wet-etching process was performed to form the nanocone-arrays for a large area, which spontaneously provides the graded doping features for a selective emitter. This enables to lower the electrical contact resistance and enhances the carrier collection due to the high electric field distribution through a nanocone. Optically, the convex-shaped nanocones efficiently reduce light-reflection and the incident light is effectively focused into Si via nanocone structure, resulting in an extremely improved the carrier collection performances. This nanocone-arrayed selective emitter simultaneously satisfies optical and electrical improvement. We report the record high efficiency of 16.3% for the periodically nanoscale patterned emitter Si solar cell.

Camp Pendleton Saves 91% in Parking Lot Lighting

DOE Office of Scientific and Technical Information (OSTI.GOV)

None

2016-01-01

Case study describes how Camp Pendleton Marine Corps Base replaced high-pressure sodium (HPS) fixtures in one parking lot with high-efficiency induction fixtures for 91% savings in energy use and $5,700 in cost savings annually. This parking lot is estimated to have a simple payback of 2.9 years. Sitewide up-grades yielded annual savings of 1 million kWh.

Sleep efficiency (but not sleep duration) of healthy school-age children is associated with grades in math and languages.

PubMed

Gruber, Reut; Somerville, Gail; Enros, Paul; Paquin, Soukaina; Kestler, Myra; Gillies-Poitras, Elizabeth

2014-12-01

The objective of this study was to examine the associations between objective measures of sleep duration and sleep efficiency with the grades obtained by healthy typically developing children in math, language, science, and art while controlling for the potential confounding effects of socioeconomic status (SES), age, and gender. We studied healthy typically developing children between 7 and 11 years of age. Sleep was assessed for five week nights using actigraphy, and parents provided their child's most recent report card. Higher sleep efficiency (but not sleep duration) was associated with better grades in math, English language, and French as a second language, above and beyond the contributions of age, gender, and SES. Sleep efficiency, but not sleep duration, is associated with academic performance as measured by report-card grades in typically developing school-aged children. The integration of strategies to improve sleep efficiency might represent a successful approach for improving children's readiness and/or performance in math and languages. Copyright © 2014 Elsevier B.V. All rights reserved.

Endoscopic Injection of Dextranomer/Hyaluronic Acid as First-Line Treatment in 851 Consecutive Children with High Grade Vesicoureteral Reflux: Efficacy and Long-Term Results.

PubMed

Friedmacher, Florian; Colhoun, Eric; Puri, Prem

2018-03-15

Endoscopic injection of dextranomer/hyaluronic is widely acknowledged as first-line treatment of lower grade vesicoureteral reflux. We demonstrate its long-term efficacy and safety in eradicating high grade reflux. A total of 518 girls and 333 boys with a median age of 2.3 years (range 2 months to 13.7 years) underwent endoscopic correction of high grade vesicoureteral reflux using dextranomer/hyaluronic acid. Reflux was unilateral in 415 cases and bilateral in 436, comprising 1,287 refluxing units. Reflux was grade IV in 1,153 ureters (89.6%) and grade V in 134 (10.4%). 99m Technetium dimercaptosuccinic acid scintigraphy identified renal scarring in 317 patients (37.3%). Followup ultrasound and voiding cystourethrogram were performed 3 months after intervention and renal ultrasound yearly thereafter. Median followup was 8.5 years (range 6 months to 16 years). Overall resolution rate after the first endoscopic injection was 69.5% (895 of 1,287 cases), with resolution in 70.4% of grade IV and 61.9% of grade V cases. Reflux resolved after a second injection in 259 cases (20.1%) and after a third injection in 133 (10.4%). Persistent reflux after initial treatment was significantly more common in patients younger than age 1 year and in individuals with renal scarring. No significant postoperative complications were observed and no patient required ureteral reimplantation. Following reflux resolution febrile urinary tract infection developed in 43 children (5.1%), including 24 (55.8%) during the first year, 15 (34.9%) during the second year and 4 (9.3%) during year 3 or later. Of these patients 6 had reflux recurrence and 8 had neocontralateral grade III reflux, which was successfully treated with a single endoscopic injection of dextranomer/hyaluronic acid. Endoscopic injection of dextranomer/hyaluronic acid is an efficient and safe long-term treatment for grade IV and V vesicoureteral reflux, and can easily be repeated in patients with treatment failure, with a high subsequent resolution rate. Copyright © 2018 American Urological Association Education and Research, Inc. Published by Elsevier Inc. All rights reserved.

Slot-coupled CW standing wave accelerating cavity

DOEpatents

Wang, Shaoheng; Rimmer, Robert; Wang, Haipeng

2017-05-16

A slot-coupled CW standing wave multi-cell accelerating cavity. To achieve high efficiency graded beta acceleration, each cell in the multi-cell cavity may include different cell lengths. Alternatively, to achieve high efficiency with acceleration for particles with beta equal to 1, each cell in the multi-cell cavity may include the same cell design. Coupling between the cells is achieved with a plurality of axially aligned kidney-shaped slots on the wall between cells. The slot-coupling method makes the design very compact. The shape of the cell, including the slots and the cone, are optimized to maximize the power efficiency and minimize the peak power density on the surface. The slots are non-resonant, thereby enabling shorter slots and less power loss.

Consequences of converting graded to action potentials upon neural information coding and energy efficiency.

PubMed

Sengupta, Biswa; Laughlin, Simon Barry; Niven, Jeremy Edward

2014-01-01

Information is encoded in neural circuits using both graded and action potentials, converting between them within single neurons and successive processing layers. This conversion is accompanied by information loss and a drop in energy efficiency. We investigate the biophysical causes of this loss of information and efficiency by comparing spiking neuron models, containing stochastic voltage-gated Na(+) and K(+) channels, with generator potential and graded potential models lacking voltage-gated Na(+) channels. We identify three causes of information loss in the generator potential that are the by-product of action potential generation: (1) the voltage-gated Na(+) channels necessary for action potential generation increase intrinsic noise and (2) introduce non-linearities, and (3) the finite duration of the action potential creates a 'footprint' in the generator potential that obscures incoming signals. These three processes reduce information rates by ∼50% in generator potentials, to ∼3 times that of spike trains. Both generator potentials and graded potentials consume almost an order of magnitude less energy per second than spike trains. Because of the lower information rates of generator potentials they are substantially less energy efficient than graded potentials. However, both are an order of magnitude more efficient than spike trains due to the higher energy costs and low information content of spikes, emphasizing that there is a two-fold cost of converting analogue to digital; information loss and cost inflation.

Consequences of Converting Graded to Action Potentials upon Neural Information Coding and Energy Efficiency

PubMed Central

Sengupta, Biswa; Laughlin, Simon Barry; Niven, Jeremy Edward

2014-01-01

Information is encoded in neural circuits using both graded and action potentials, converting between them within single neurons and successive processing layers. This conversion is accompanied by information loss and a drop in energy efficiency. We investigate the biophysical causes of this loss of information and efficiency by comparing spiking neuron models, containing stochastic voltage-gated Na+ and K+ channels, with generator potential and graded potential models lacking voltage-gated Na+ channels. We identify three causes of information loss in the generator potential that are the by-product of action potential generation: (1) the voltage-gated Na+ channels necessary for action potential generation increase intrinsic noise and (2) introduce non-linearities, and (3) the finite duration of the action potential creates a ‘footprint’ in the generator potential that obscures incoming signals. These three processes reduce information rates by ∼50% in generator potentials, to ∼3 times that of spike trains. Both generator potentials and graded potentials consume almost an order of magnitude less energy per second than spike trains. Because of the lower information rates of generator potentials they are substantially less energy efficient than graded potentials. However, both are an order of magnitude more efficient than spike trains due to the higher energy costs and low information content of spikes, emphasizing that there is a two-fold cost of converting analogue to digital; information loss and cost inflation. PMID:24465197

Simplified efficient phosphorescent organic light-emitting diodes by organic vapor phase deposition

NASA Astrophysics Data System (ADS)

Pfeiffer, P.; Beckmann, C.; Stümmler, D.; Sanders, S.; Simkus, G.; Heuken, M.; Vescan, A.; Kalisch, H.

2017-12-01

The most efficient phosphorescent organic light-emitting diodes (OLEDs) are comprised of complex stacks with numerous organic layers. State-of-the-art phosphorescent OLEDs make use of blocking layers to confine charge carriers and excitons. On the other hand, simplified OLEDs consisting of only three organic materials have shown unexpectedly high efficiency when first introduced. This was attributed to superior energy level matching and suppressed external quantum efficiency (EQE) roll-off. In this work, we study simplified OLED stacks, manufactured by organic vapor phase deposition, with a focus on charge balance, turn-on voltage (Von), and efficiency. To prevent electrons from leaking through the device, we implemented a compositionally graded emission layer. By grading the emitter with the hole transport material, charge confinement is enabled without additional blocking layers. Our best performing organic stack is composed of only three organic materials in two layers including the emitter Ir(ppy)3 and yields a Von of 2.5 V (>1 cd/m2) and an EQE of 13% at 3000 cd/m2 without the use of any additional light extraction techniques. Changes in the charge balance, due to barrier tuning or adjustments in the grading parameters and layer thicknesses, are clearly visible in the current density-voltage-luminance (J-V-L) measurements. As charge injection at the electrodes and organic interfaces is of great interest but difficult to investigate in complex device structures, we believe that our simplified organic stack is not only a potent alternative to complex state-of-the-art OLEDs but also a well suited test vehicle for experimental studies focusing on the modification of the electrode-organic semiconductor interface.

Semiconductor-based photoelectrochemical water splitting at the limit of very wide depletion region

DOE PAGES

Liu, Mingzhao; Lyons, John L.; Yan, Danhua H.; ...

2015-11-23

In semiconductor-based photoelectrochemical (PEC) water splitting, carrier separation and delivery largely relies on the depletion region formed at the semiconductor/water interface. As a Schottky junction device, the trade-off between photon collection and minority carrier delivery remains a persistent obstacle for maximizing the performance of a water splitting photoelectrode. Here, it is demonstrated that the PEC water splitting efficiency for an n-SrTiO 3 (n-STO) photoanode is improved very significantly despite its weak indirect band gap optical absorption (α < 10⁴ cm⁻¹), by widening the depletion region through engineering its doping density and profile. Graded doped n-SrTiO 3 photoanodes are fabricated withmore » their bulk heavily doped with oxygen vacancies but their surface lightly doped over a tunable depth of a few hundred nanometers, through a simple low temperature re-oxidation technique. The graded doping profile widens the depletion region to over 500 nm, thus leading to very efficient charge carrier separation and high quantum efficiency (>70%) for the weak indirect transition. As a result, this simultaneous optimization of the light absorption, minority carrier (hole) delivery, and majority carrier (electron) transport by means of a graded doping architecture may be useful for other indirect band gap photocatalysts that suffer from a similar problem of weak optical absorption.« less

Co-Optimization of Fuels & Engines: Misfueling Mitigation

DOE Office of Scientific and Technical Information (OSTI.GOV)

Sluder, C. Scott; Moriarty, Kristi; Jehlik, Forrest

This report examines diesel/gasoline misfueling, leaded/unleaded gasoline misfueling, E85/E15/E10 misfueling, and consumer selection of regular grade fuel over premium grade fuel in an effort to evaluate misfueling technologies that may be needed to support the introduction of vehicles optimized for a new fuel in the marketplace. This is one of a series of reports produced as a result of the Co-Optimization of Fuels & Engines (Co-Optima) project, a Department of Energy-sponsored multi-agency project to accelerate the introduction of affordable, scalable, and sustainable biofuels and high-efficiency, low-emission vehicle engines.

Toward a III-V Multijunction Space Cell Technology on Si

NASA Technical Reports Server (NTRS)

Ringel, S. A.; Lueck, M. R.; Andre, C. L.; Fitzgerald, E. A.; Wilt, D. M.; Scheiman, D.

2007-01-01

High efficiency compound semiconductor solar cells grown on Si substrates are of growing interest in the photovoltaics community for both terrestrial and space applications. As a potential substrate for III-V compound photovoltaics, Si has many advantages over traditional Ge and GaAs substrates that include higher thermal conductivity, lower weight, lower material costs, and the potential to leverage the extensive manufacturing base of the Si industry. Such a technology that would retain high solar conversion efficiency at reduced weight and cost would result in space solar cells that simultaneously possess high specific power (W/kg) and high power density (W/m2). For terrestrial solar cells this would result in high efficiency III-V concentrators with improved thermal conductivity, reduced cost, and via the use of SiGe graded interlayers as active component layers the possibility of integrating low bandgap sub-cells that could provide for extremely high conversion efficiency.1 In addition to photovoltaics, there has been an historical interest in III-V/Si integration to provide optical interconnects in Si electronics, which has become of even greater relevance recently due to impending bottlenecks in CMOS based circuitry. As a result, numerous strategies to integrate GaAs with Si have been explored with the primary issue being the approx.4% lattice mismatch between GaAs and Si. Among these efforts, relaxed, compositionally-graded SiGe buffer layers where the substrate lattice constant is effectively tuned from Si to that of Ge so that a close lattice match to subsequent GaAs overlayers have shown great promise. With this approach, threading dislocation densities (TDDs) of approx.1 x 10(exp 6)/sq cm have been uniformly achieved in relaxed Ge layers on Si,5 leading to GaAs on Si with minority carrier lifetimes greater than 10 ns,6 GaAs single junction solar cells on Si with efficiencies greater than 18%,7 InGaAs CW laser diodes on Si,8 and room temperature GaInP red laser diodes on Si.9 Here we report on the first high performance dual junction GaInP/GaAs solar cells grown on Si using this promising SiGe engineered substrate approach.

Graded Heterojunction Engineering for Hole-Conductor-Free Perovskite Solar Cells with High Hole Extraction Efficiency and Conductivity.

PubMed

Li, Bo; Zhang, Yanan; Zhang, Luyuan; Yin, Longwei

2017-10-01

Despite great progress in the photovoltaic conversion efficiency (PCE) of inorganic-organic hybrid perovskite solar cells (PSCs), the large-scale application of PSCs still faces serious challenges due to the poor-stability and high-cost of the spiro-OMeTAD hole transport layer (HTL). It is of great fundamental importance to rationally address the issues of hole extraction and transfer arising from HTL-free PSCs. Herein, a brand-new PSC architecture is designed by introducing multigraded-heterojunction (GHJ) inorganic perovskite CsPbBr x I 3- x layers as an efficient HTL. The grade adjustment can be achieved by precisely tuning the halide proportion and distribution in the CsPbBr x I 3- x film to reach an optimal energy alignment of the valance and conduction band between MAPbI 3 and CsPbBr x I 3- x . The CsPbBr x I 3- x GHJ as an efficient HTL can induce an electric field where a valance/conduction band edge is leveraged to bend at the heterojunction interface, boosting the interfacial electron-hole splitting and photoelectron extraction. The GHJ architecture enhances the hole extraction and conduction efficiency from the MAPbI 3 to the counter electrode, decreases the recombination loss during the hole transfer, and benefits in increasing the open-circuit voltage. The optimized HTL-free PCS based on the GHJ architecture demonstrates an outstanding thermal stability and a significantly improved PCE of 11.33%, nearly 40% increase compared with 8.16% for pure HTL-free devices. © 2017 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

INSTRUCTIONAL GUIDE FOR THE TEACHING OF HEALTH AND PHYSICAL EDUCATION. PRIMARY THROUGH SENIOR HIGH SCHOOL.

ERIC Educational Resources Information Center

BROCKMEYER, W.

AN INSTRUCTIONAL GUIDE FOR THE TEACHING OF HEALTH AND PHYSICAL EDUCATION, EMPHASIZING EDUCATION BY EXPERIENCE IN ACTIVITY, WAS PRESENTED. THE GOALS WERE TO DEVELOP GOOD HUMAN RELATIONSHIPS, GOOD SELF-REALIZATION, CIVIC RESPONSIBILITY, AND ECONOMIC EFFICIENCY. THE PROGRAM FOR BOYS, GRADES SEVEN THROUGH NINE, INCLUDED CALISTHENICS APPARATUS (SUCH AS…

A Study of the Effectiveness of Teaching Listening.

ERIC Educational Resources Information Center

Broiles, Mack R.

Listening, the most efficient means of learning in the early grades, is replaced by reading as an efficient method for learning after the seventh grade. For an investigation of the effectiveness with which college students may be taught listening, lesson plans were developed from a programed instruction book --Principles of Selective Listening--…

The Contribution of Segmental and Suprasegmental Phonology to Reading Comprehension

PubMed Central

Veenendaal, Nathalie J.; Groen, Margriet A.; Verhoeven, Ludo

2016-01-01

The aim of the present study was to examine the relation between decoding and segmental and suprasegmental phonology, and their contribution to reading comprehension, in the upper primary grades. Following a longitudinal design, the performance of 99 Dutch primary school children on phonological awareness (segmental phonology) and text reading prosody (suprasegmental phonology) in fourth-grade and fifth-grade, and reading comprehension in sixth-grade were examined. In addition, decoding efficiency as a general assessment of reading was examined. Structural path modeling firstly showed that the relation between decoding efficiency and both measures of phonology from fourth- to fifth grade was unidirectional. Secondly, the relation between decoding in fourth- and fifth-grade and reading comprehension in sixth-grade became indirect when segmental and suprasegmental phonology were added to the model. Both factors independently exerted influence on later reading comprehension. This leads to the conclusion that not only segmental, but also suprasegmental phonology, contributes substantially to children's reading development. PMID:27551159

Synthesis of Silane and Silicon in a Non-equilibrium Plasma Jet

NASA Technical Reports Server (NTRS)

Calcote, H. F.

1978-01-01

The original objective of this program was to determine the feasibility of high volume, low-cost production of high purity silane or solar cell grade silicon using a non equilibrium plasma jet. The emphasis was changed near the end of the program to determine the feasibility of preparing photovoltaic amorphous silicon films directly using this method. The non equilibrium plasma jet should be further evaluated as a technique for producing high efficiency photovoltaic amorphous silicon films.

Academic Vocabulary Learning in First Through Third Grade in Low-Income Schools: Effects of Automated Supplemental Instruction.

PubMed

Goldstein, Howard; Ziolkowski, Robyn A; Bojczyk, Kathryn E; Marty, Ana; Schneider, Naomi; Harpring, Jayme; Haring, Christa D

2017-11-09

This study investigated cumulative effects of language learning, specifically whether prior vocabulary knowledge or special education status moderated the effects of academic vocabulary instruction in high-poverty schools. Effects of a supplemental intervention targeting academic vocabulary in first through third grades were evaluated with 241 students (6-9 years old) from low-income families, 48% of whom were retained for the 3-year study duration. Students were randomly assigned to vocabulary instruction or comparison groups. Curriculum-based measures of word recognition, receptive identification, expressive labeling, and decontextualized definitions showed large effects for multiple levels of word learning. Hierarchical linear modeling revealed that students with higher initial Peabody Picture Vocabulary Test-Fourth Edition scores (Dunn & Dunn, 2007) demonstrated greater word learning, whereas students with special needs demonstrated less growth in vocabulary. This model of vocabulary instruction can be applied efficiently in high-poverty schools through an automated, easily implemented adjunct to reading instruction in the early grades and holds promise for reducing gaps in vocabulary development.

Phosphorus Diffusion Gettering Efficacy in Upgraded Metallurgical-Grade Solar Silicon

NASA Astrophysics Data System (ADS)

Jiménez, A.; del Cañizo, C.; Cid, C.; Peral, A.

2018-05-01

In the context of the continuous price reduction in photovoltaics (PV) in recent years, Si feedstock continues to be a relevant component in the cost breakdown of a PV module, highlighting the need for low-cost, low-capital expenditure (CAPEX) silicon technologies to further reduce this cost component. Upgraded metallurgical-grade silicon (UMG Si) has recently received much attention, improving its quality and even attaining, in some cases, solar cell efficiencies similar to those of conventional material. However, some technical challenges still have to be addressed when processing this material to compensate efficiently for the high content of impurities and contaminants. Adaptation of a conventional solar cell process to monocrystalline UMG Si wafers has been studied in this work. In particular, a tailored phosphorus diffusion gettering step followed by a low-temperature anneal at 700°C was implemented, resulting in enhanced bulk lifetime and emitter recombination properties. In spite of the need for further research and material optimization, UMG Si wafers were successfully processed, achieving efficiencies in the range of 15% for a standard laboratory solar cell process with aluminum back surface field.

Improving the performance of AlGaN-based deep-ultraviolet light-emitting diodes using electron blocking layer with a heart-shaped graded Al composition

NASA Astrophysics Data System (ADS)

Kwon, M. R.; Park, T. H.; Lee, T. H.; Lee, B. R.; Kim, T. G.

2018-04-01

We propose a design for highly efficient AlGaN-based deep-ultraviolet light-emitting diodes (DUV LEDs) using a heart-shaped graded Al composition electron-blocking layer (EBL). This novel structure reduced downward band bending at the interface between the last quantum barrier and the EBL and flattened the electrostatic field in the interlayer between the barriers of the multi-quantum barrier EBL. Consequently, electron leakage was significantly suppressed and hole injection efficiency was found to have improved. The parameter values of simulation were extracted from the experimental data of the reference DUV LEDs. Using the SimuLED, we compared the electrical and optical properties of three structures with different Al compositions in the active region and the EBL. The internal quantum efficiency of the proposed structure was shown to exceed those of the reference DUV LEDs by a factor of 1.9. Additionally, the output power at 20 mA was found to increase by a factor of 2.1.

Semiconductor Seeded Nanorods with Graded Composition Exhibiting High Quantum-Yield, High Polarization, and Minimal Blinking.

PubMed

Hadar, Ido; Philbin, John P; Panfil, Yossef E; Neyshtadt, Shany; Lieberman, Itai; Eshet, Hagai; Lazar, Sorin; Rabani, Eran; Banin, Uri

2017-04-12

Seeded semiconductor nanorods represent a unique family of quantum confined materials that manifest characteristics of mixed dimensionality. They show polarized emission with high quantum yield and fluorescence switching under an electric field, features that are desirable for use in display technologies and other optical applications. So far, their robust synthesis has been limited mainly to CdSe/CdS heterostructures, thereby constraining the spectral tunability to the red region of the visible spectrum. Herein we present a novel synthesis of CdSe/Cd 1-x Zn x S seeded nanorods with a radially graded composition that show bright and highly polarized green emission with minimal intermittency, as confirmed by ensemble and single nanorods optical measurements. Atomistic pseudopotential simulations elucidate the importance of the Zn atoms within the nanorod structure, in particular the effect of the graded composition. Thus, the controlled addition of Zn influences and improves the nanorods' optoelectronic performance by providing an additional handle to manipulate the degree confinement beyond the common size control approach. These nanorods may be utilized in applications that require the generation of a full, rich spectrum such as energy-efficient displays and lighting.

Role of nuclear grade graphite in controlling oxidation in modular HTGRs

DOE Office of Scientific and Technical Information (OSTI.GOV)

Windes, Willaim; Strydom, G.; Kane, J.

2014-11-01

The passively safe High Temperature Gas-cooled Reactor (HTGR) design is one of the primary concepts considered for Generation IV and Small Modular Reactor (SMR) programs. The helium cooled, nuclear grade graphite moderated core achieves extremely high operating temperatures allowing either industrial process heat or electricity generation at high efficiencies. In addition to their neutron moderating properties, nuclear grade graphite core components provide excellent high temperature stability, thermal conductivity, and chemical compatibility with the high temperature nuclear fuel form. Graphite has been continuously used in nuclear reactors since the 1940’s and has performed remarkably well over a wide range of coremore » environments and operating conditions. Graphite moderated, gas-cooled reactor designs have been safely used for research and power production purposes in multiple countries since the inception of nuclear energy development. However, graphite is a carbonaceous material, and this has generated a persistent concern that the graphite components could actually burn during either normal or accident conditions [ , ]. The common assumption is that graphite, since it is ostensibly similar to charcoal and coal, will burn in a similar manner. While charcoal and coal may have the appearance of graphite, the internal microstructure and impurities within these carbonaceous materials are very different. Volatile species and trapped moisture provide a source of oxygen within coal and charcoal allowing them to burn. The fabrication process used to produce nuclear grade graphite eliminates these oxidation enhancing impurities, creating a dense, highly ordered form of carbon possessing high thermal diffusivity and strongly (covalently) bonded atoms.« less

Efficiency of Finnish General Upper Secondary Schools: An Application of Stochastic Frontier Analysis with Panel Data

ERIC Educational Resources Information Center

Kirjavainen, Tanja

2012-01-01

Different stochastic frontier models for panel data are used to estimate education production functions and the efficiency of Finnish general upper secondary schools. Grades in the matriculation examination are used as an output and explained with the comprehensive school grade point average, parental socio-economic background, school resources,…

Steam engine research for solar parabolic dish

NASA Technical Reports Server (NTRS)

Demler, R. L.

1981-01-01

The parabolic dish solar concentrator provides an opportunity to generate high grade energy in a modular system. Most of the capital is projected to be in the dish and its installation. Assurance of a high production demand of a standard dish could lead to dramatic cost reductions. High production volume in turn depends upon maximum application flexibility by providing energy output options, e.g., heat, electricity, chemicals and combinations thereof. Subsets of these options include energy storage and combustion assist. A steam engine design and experimental program is described which investigate the efficiency potential of a small 25 kW compound reheat cycle piston engine. An engine efficiency of 35 percent is estimated for a 700 C steam temperature from the solar receiver.

Machine grading of lumber : practical concerns for lumber producers

Treesearch

William L. Galligan; Kent A. McDonald

2000-01-01

Machine lumber grading has been applied in commercial operations in North America since 1963, and research has shown that machine grading can improve the efficient use of wood. However, industry has been reluctant to apply research findings without clear evidence that the change from visual to machine grading will be a profitable one. For instance, mill managers need...

High-Speed High-Efficiency Large-Area Resonant Cavity Enhanced p-i-n Photodiodes for Multimode Fiber Communications

DTIC Science & Technology

2001-12-01

850 nm. The layers are grown by molecular beam epitaxy . The AlGaAs–GaAs inter- faces are alloy-graded for 30 nm to eliminate charge trapping that may... beam of the VCSELs allow for easy coupling of light into the MMF, it is also desirable to have photodetectors with large active windows compatible with... VCSEL )emitting at 850 nm [1] have become the preferred source for high-speed short-wavelength communication systems. These VCSELs are particularly

High-Efficiency Polycrystalline CdS/CdTe Solar Cells on Buffered Commercial TCO-Coated Glass

NASA Astrophysics Data System (ADS)

Colegrove, E.; Banai, R.; Blissett, C.; Buurma, C.; Ellsworth, J.; Morley, M.; Barnes, S.; Gilmore, C.; Bergeson, J. D.; Dhere, R.; Scott, M.; Gessert, T.; Sivananthan, Siva

2012-10-01

Multiple polycrystalline CdS/CdTe solar cells with efficiencies greater than 15% were produced on buffered, commercially available Pilkington TEC Glass at EPIR Technologies, Inc. (EPIR, Bolingbrook, IL) and verified by the National Renewable Energy Laboratory (NREL). n-CdS and p-CdTe were grown by chemical bath deposition (CBD) and close space sublimation, respectively. Samples with sputter-deposited CdS were also investigated. Initial results indicate that this is a viable dry-process alternative to CBD for production-scale processing. Published results for polycrystalline CdS/CdTe solar cells with high efficiencies are typically based on cells using research-grade transparent conducting oxides (TCOs) requiring high-temperature processing inconducive to low-cost manufacturing. EPIR's results for cells on commercial glass were obtained by implementing a high-resistivity SnO2 buffer layer and by optimizing the CdS window layer thickness. The high-resistivity buffer layer prevents the formation of CdTe-TCO junctions, thereby maintaining a high open-circuit voltage and fill factor, whereas using a thin CdS layer reduces absorption losses and improves the short-circuit current density. EPIR's best device demonstrated an NREL-verified efficiency of 15.3%. The mean efficiency of hundreds of cells produced with a buffer layer between December 2010 and June 2011 is 14.4%. Quantum efficiency results are presented to demonstrate EPIR's progress toward NREL's best-published results.

U.S. Chamber Adds Business Viewpoint on Schools' Quality

ERIC Educational Resources Information Center

Archer, Jeff

2007-01-01

With a new and highly critical report card offering a business perspective on the effectiveness of state education systems, the U.S. Chamber of Commerce is pushing what it sees as a prescription for more innovative, efficient, and better-performing schools. For the chamber, the grades and policy platform further a concerted new effort to shape…

[Association between occupational stress and presenteeism among medical staff at grade A tertiary hospitals in Shanghai, China].

PubMed

Dai, Junming; Hua, Yujie; Zhang, Hao; Huang, Li; Fu, Hua

2015-10-01

To investigate the current status of occupational stress and presenteeism among medical staff at grade A tertiary hospitals in Shanghai, China, and to analyze the association between occupational stress and presenteeism. A total of 2356 healthcare workers from eight grade A tertiary hospitals in Shanghai were investigated by stratified random sampling. All the subjects were asked to complete self-administered questionnaires with informed consent. The occupational stress was assessed by the occupational stress core questionnaire. The presenteeism was evaluated by the Stanford Presenteeism Scale. In all subjects, the average score of presenteeism was 15.23 ± 3.89, and 72.5% felt occupational stress in self-evaluation. There were significant differences in the score of presenteeism between subjects with different ages, education levels, occupations, lengths of service, job titles, and shifts (all P<0.05). There were significant differences in the score of presenteeism and the rate of high presenteeism between subjects with different indices of occupational stress, including job demand, control, social support, and demand-control ratio (P<0.01). High job demand and high demand-control ratio were risk factors for high presenteeism (OR=2.56, 95% CI=2.01~3.27; OR=1.53, 95% CI=1.23~1.90). High social support was a protective factor for high presenteeism (OR=0.23, 95% CI=0.18~0.29). The intensity of occupational stress in medical staff from grade A tertiary hospitals is positively correlated with the level of presenteeism. It is important to promote social support to reduce the loss of work efficiency due to presenteeism.

Parametric Instabilities During High Power Helicon Wave Injection on DIII-D

NASA Astrophysics Data System (ADS)

Porkolab, M.; Pinsker, R. I.

2017-10-01

High power helicon (whistler) waves at a frequency of 0.47 GHz are being considered for efficient off-axis current generation in high performance DIII-D plasmas and in K-Star [3]. The need for deploying helicon waves for current profile control has been noted in previous publications since penetration to the core of reactor grade plasmas is easier than with lower hybrid slow waves (LHCD) which suffer from accessibility limitations and strong electron Landau absorption in fusion grade high temperature plasmas. In this work we show that under typical experimental conditions in present day tokamaks with 1 MW of RF power coupled per antenna, the associated perpendicular electric fields of the order of 40 kV/m can drive strong parametric decay instabilities near the lower hybrid layer. The EXB and polarization drift velocities which are the dominant driver of the PDI can be comparable to the speed of sound in the outer plasma layers, a key measure of driving PDI instabilities. Here we calculate growth rates and convective thresholds for PDIs, and we find that decay waves into hot ion lower hybrid waves and ion cyclotron quasi modes dominate in the vicinity of the lower hybrid layer, possibly leading to pump depletion. Such instabilities in future reactor grade high temperature plasmas are less likely.

Solar silicon via the Dow Corning process

NASA Technical Reports Server (NTRS)

Hunt, L. P.; Dosaj, V. D.

1979-01-01

Technical feasibility for high volume production of solar cell-grade silicon is investigated. The process consists of producing silicon from pure raw materials via the carbothermic reduction of quartz. This silicon was then purified to solar grade by impurity segregation during Czochralski crystal growth. Commercially available raw materials were used to produce 100 kg quantities of silicon during 60 hour periods in a direct arc reactor. This silicon produced single crystalline ingot, during a second Czochralski pull, that was fabricated into solar cells having efficiencies ranging from 8.2 percent to greater than 14 percent. An energy analysis of the entire process indicated a 5 month payback time.

Composition-graded nanowire solar cells fabricated in a single process for spectrum-splitting photovoltaic systems.

PubMed

Caselli, Derek; Liu, Zhicheng; Shelhammer, David; Ning, Cun-Zheng

2014-10-08

Nanomaterials such as semiconductor nanowires have unique features that could enable novel optoelectronic applications such as novel solar cells. This paper aims to demonstrate one such recently proposed concept: Monolithically Integrated Laterally Arrayed Multiple Band gap (MILAMB) solar cells for spectrum-splitting photovoltaic systems. Two cells with different band gaps were fabricated simultaneously in the same process on a single substrate using spatially composition-graded CdSSe alloy nanowires grown by the Dual-Gradient Method in a chemical vapor deposition system. CdSSe nanowire ensemble devices tested under 1 sun AM1.5G illumination achieved open-circuit voltages up to 307 and 173 mV and short-circuit current densities as high as 0.091 and 0.974 mA/cm(2) for the CdS- and CdSe-rich cells, respectively. The open-circuit voltages were roughly three times those of similar CdSSe film cells fabricated for comparison due to the superior optical quality of the nanowires. I-V measurements were also performed using optical filters to simulate spectrum-splitting. The open-circuit voltages and fill factors of the CdS-rich subcells were uniformly larger than the corresponding CdSe-rich cells for similar photon flux, as expected. This suggests that if all wires can be contacted, the wide-gap cell is expected to have greater output power than the narrow-gap cell, which is the key to achieving high efficiencies with spectrum-splitting. This paper thus provides the first proof-of-concept demonstration of simultaneous fabrication of MILAMB solar cells. This approach to solar cell fabrication using single-crystal nanowires for spectrum-splitting photovoltaics could provide a future low-cost high-efficiency alternative to the conventional high-cost high-efficiency tandem cells.

NEPP Evaluation of Automotive Grade Tantalum Chip Capacitors

NASA Technical Reports Server (NTRS)

Sampson, Mike; Brusse, Jay

2018-01-01

Automotive grade tantalum (Ta) chip capacitors are available at lower cost with smaller physical size and higher volumetric efficiency compared to military/space grade capacitors. Designers of high reliability aerospace and military systems would like to take advantage of these attributes while maintaining the high standards for long-term reliable operation they are accustomed to when selecting military-qualified established reliability tantalum chip capacitors (e.g., MIL-PRF-55365). The objective for this evaluation was to assess the long-term performance of off-the-shelf automotive grade Ta chip capacitors (i.e., manufacturer self-qualified per AEC Q-200). Two (2) lots of case size D manganese dioxide (MnO2) cathode Ta chip capacitors from 1 manufacturer were evaluated. The evaluation consisted of construction analysis, basic electrical parameter characterization, extended long-term (2000 hours) life testing and some accelerated stress testing. Tests and acceptance criteria were based upon manufacturer datasheets and the Automotive Electronics Council's AEC Q-200 qualification specification for passive electronic components. As-received a few capacitors were marginally above the specified tolerance for capacitance and ESR. X-ray inspection found that the anodes for some devices may not be properly aligned within the molded encapsulation leaving less than 1 mil thickness of the encapsulation. This evaluation found that the long-term life performance of automotive grade Ta chip capacitors is generally within specification limits suggesting these capacitors may be suitable for some space applications.

Classroom: Efficient Grading

ERIC Educational Resources Information Center

Shaw, David D.; Pease, Leonard F., III.

2014-01-01

Grading can be accelerated to make time for more effective instruction. This article presents specific time management strategies selected to decrease administrative time required of faculty and teaching assistants, including a multiple answer multiple choice interface for exams, a three-tier grading system for open ended problem solving, and a…

On the Properties and Design of Organic Light-Emitting Devices

NASA Astrophysics Data System (ADS)

Erickson, Nicholas C.

Organic light-emitting devices (OLEDs) are attractive for use in next-generation display and lighting technologies. In display applications, OLEDs offer a wide emission color gamut, compatibility with flexible substrates, and high power efficiencies. In lighting applications, OLEDs offer attractive features such as broadband emission, high-performance, and potential compatibility with low-cost manufacturing methods. Despite recent demonstrations of near unity internal quantum efficiencies (photons out per electron in), OLED adoption lags conventional technologies, particularly in large-area displays and general lighting applications. This thesis seeks to understand the optical and electronic properties of OLED materials and device architectures which lead to not only high peak efficiency, but also reduced device complexity, high efficiency under high excitation, and optimal white-light emission. This is accomplished through the careful manipulation of organic thin film compositions fabricated via vacuum thermal evaporation, and the introduction of a novel device architecture, the graded-emissive layer (G-EML). This device architecture offers a unique platform to study the electronic properties of varying compositions of organic semiconductors and the resulting device performance. This thesis also introduces an experimental technique to measure the spatial overlap of electrons and holes within an OLED's emissive layer. This overlap is an important parameter which is affected by the choice of materials and device design, and greatly impacts the operation of the OLED at high excitation densities. Using the G-EML device architecture, OLEDs with improved efficiency characteristics are demonstrated, achieving simultaneously high brightness and high efficiency.

Membrane-based osmotic heat engine with organic solvent for enhanced power generation from low-grade heat.

PubMed

Shaulsky, Evyatar; Boo, Chanhee; Lin, Shihong; Elimelech, Menachem

2015-05-05

We present a hybrid osmotic heat engine (OHE) system that uses draw solutions with an organic solvent for enhanced thermal separation efficiency. The hybrid OHE system produces sustainable energy by combining pressure-retarded osmosis (PRO) as a power generation stage and membrane distillation (MD) utilizing low-grade heat as a separation stage. While previous OHE systems employed aqueous electrolyte draw solutions, using methanol as a solvent is advantageous because methanol is highly volatile and has a lower heat capacity and enthalpy of vaporization than water. Hence, the thermal separation efficiency of a draw solution with methanol would be higher than that of an aqueous draw solution. In this study, we evaluated the performance of LiCl-methanol as a potential draw solution for a PRO-MD hybrid OHE system. The membrane transport properties as well as performance with LiCl-methanol draw solution were evaluated using thin-film composite (TFC) PRO membranes and compared to the results obtained with a LiCl-water draw solution. Experimental PRO methanol flux and maximum projected power density of 47.1 L m(-2) h(-1) and 72.1 W m(-2), respectively, were achieved with a 3 M LiCl-methanol draw solution. The overall efficiency of the hybrid OHE system was modeled by coupling the mass and energy flows between the thermal separation (MD) and power generation (PRO) stages under conditions with and without heat recovery. The modeling results demonstrate higher OHE energy efficiency with the LiCl-methanol draw solution compared to that with the LiCl-water draw solution under practical operating conditions (i.e., heat recovery<90%). We discuss the implications of the results for converting low-grade heat to power.

Membrane-Based Osmotic Heat Engine with Organic Solvent for Enhanced Power Generation from Low-Grade Heat

DOE Office of Scientific and Technical Information (OSTI.GOV)

Shaulsky, E; Boo, C; Lin, SH

We present a hybrid osmotic heat engine (OHE) system that uses draw solutions with an organic solvent for enhanced thermal separation efficiency. The hybrid OHE system produces sustainable energy by combining pressure-retarded osmosis (PRO) as a power generation stage and membrane distillation (MD) utilizing low-grade heat as a separation stage. While previous OHE systems employed aqueous electrolyte draw solutions, using methanol as a solvent is advantageous because methanol is highly volatile and has a lower heat capacity and enthalpy of vaporization than water. Hence, the thermal separation efficiency of a draw solution with methanol would be higher than that ofmore » an aqueous draw solution. In this study, we evaluated the performance of LiCl-methanol as a potential draw solution for a PRO-MD hybrid OHE system. The membrane transport properties as well as performance with LiCl methanol draw solution were evaluated using thin-film composite (TFC) PRO membranes and compared to the results obtained with a LiCl water draw solution. Experimental PRO methanol flux and maximum projected power density of 47.1 L m(-2) h(-1) and 72.1 W m(-2), respectively, were achieved with a 3 M LiCl-methanol draw solution. The overall efficiency of the hybrid OHE system was modeled by coupling the mass and energy flows between the thermal separation (MD) and power generation (PRO) stages under conditions with and without heat recovery. The modeling results demonstrate higher ORE energy efficiency with the LiCl methanol draw solution compared to that with the LiCl water draw solution under practical operating conditions (i.e., heat recovery <90%). We discuss the implications of the results for converting low-grade heat to power.« less

Honeybee economics: optimisation of foraging in a variable world.

PubMed

Stabentheiner, Anton; Kovac, Helmut

2016-06-20

In honeybees fast and efficient exploitation of nectar and pollen sources is achieved by persistent endothermy throughout the foraging cycle, which means extremely high energy costs. The need for food promotes maximisation of the intake rate, and the high costs call for energetic optimisation. Experiments on how honeybees resolve this conflict have to consider that foraging takes place in a variable environment concerning microclimate and food quality and availability. Here we report, in simultaneous measurements of energy costs, gains, and intake rate and efficiency, how honeybee foragers manage this challenge in their highly variable environment. If possible, during unlimited sucrose flow, they follow an 'investment-guided' ('time is honey') economic strategy promising increased returns. They maximise net intake rate by investing both own heat production and solar heat to increase body temperature to a level which guarantees a high suction velocity. They switch to an 'economizing' ('save the honey') optimisation of energetic efficiency if the intake rate is restricted by the food source when an increased body temperature would not guarantee a high intake rate. With this flexible and graded change between economic strategies honeybees can do both maximise colony intake rate and optimise foraging efficiency in reaction to environmental variation.

Historical perspective of barriers to achieving high-efficiency silicon solar cells

NASA Technical Reports Server (NTRS)

Lindmayer, J.

1985-01-01

Early silicon solar cells were made of metallurgical-grade silicon with very low efficiency. The single-crystal silicon introduced in the mid-50's increased the efficiency to the 5% to 10% region. Throughout the 1960s the technology of the 2 x 2 cm or 2 x 4 cm space solar cell with 10% efficiency was established. In the early 1970s work related to the violet cell upset the status quo and space solar cells and cells in general became more efficient. The rest of the decade became characterized by establishing a terrestrial photovoltaic technology to support the development of a new industry. Costs per watt became the dominant consideration and frequently the efficiency was compromised. The introduction of materials and other forms of silicon dropped the efficiency and it is now a state of mine that accomplishing 10% efficiency with some alternative combination is regarded as success. Silicon solar cells are capable of delivering efficiences much greater than 10%.

Enhancement of biocompatibility of 316LVM stainless steel by cyclic potentiodynamic passivation.

PubMed

Shahryari, Arash; Omanovic, Sasha; Szpunar, Jerzy A

2009-06-15

Passivation of stainless steel implants is a common procedure used to increase their biocompatibility. The results presented in this work demonstrate that the electrochemical cyclic potentiodynamic polarization (CPP) of a biomedical grade 316LVM stainless steel surface is a very efficient passivation method that can be used to significantly improve the material's general corrosion resistance and thus its biocompatibility. The influence of a range of experimental parameters on the passivation/corrosion protection efficiency is discussed. The passive film formed on a 316LVM surface by using the CPP method offers a significantly higher general corrosion resistance than the naturally grown passive film. The corresponding relative corrosion protection efficiency measured in saline during a 2-month period was 97% +/- 1%, which demonstrates a very high stability of the CPP-formed passive film. Its high corrosion protection efficiency was confirmed also at temperatures and chloride concentrations well above normal physiological levels. It was also shown that the CPP is a significantly more effective passivation method than some other surface-treatment methods commonly used to passivate biomedical grade stainless steels. In addition, the CPP-passivated 316LVM surface showed an enhanced biocompatibility in terms of preosteoblast (MC3T3) cells attachment. An increased thickness of the CPP-formed passive film and its enrichment with Cr(VI) and oxygen was determined to be the origin of the material's increased general corrosion resistance, whereas the increased surface roughness and surface (Volta) potential were suggested to be the origin of the enhanced preosteoblast cells attachment. Copyright 2008 Wiley Periodicals, Inc.

Reduced recombination in a surface-sulfurized Cu(InGa)Se2 thin-film solar cell

NASA Astrophysics Data System (ADS)

Kim, Shinho; Nishinaga, Jiro; Kamikawa, Yukiko; Ishizuka, Shogo; Nagai, Takehiko; Koida, Takashi; Tampo, Hitoshi; Shibata, Hajime; Matsubara, Koji; Niki, Shigeru

2018-05-01

This study demonstrates surface sulfurization effects on Cu(InGa)Se2 (CIGSe) thin-film solar cells with a single back-graded band gap. Single back-graded CIGSe thin films were prepared via a three-stage process in a high-vacuum molecular beam epitaxial growth chamber and were subsequently annealed in a tube furnace under environmental conditions with H2S gas. After sulfurization, an ∼80- to ∼100-nm-thick CuIn(SSe)2 layer with significantly small Ga contents (CISSe:Ga) was formed on the CIGSe layer. The newly formed CISSe:Ga layer exhibited graded S contents from surface to bulk, thus resulting in a front-graded band gap. In addition, CISSe:Ga was covered with S-enriched CISSe region that was extended from the surface to a depth of a few nm and was depleted of Ga. A device with the sulfurized CIGSe showed reduced recombination at the buffer–absorber interface, in space-charge region and in bulk. Consequently, the open circuit voltage increased from 0.58 V (in the non-sulfurized case) to 0.66 V, and the conversion efficiency improved from 15.5 to 19.4%. This large improvement is caused by the front graded band gap at the surface and the hole-blocking barrier, which suppress recombination at the CdS/CISSe:Ga interface. In addition, sulfurization followed by KF post-deposition treatment (PDT) increased the efficiency to 20.1%. Compared to the untreated sulfurized device, the KF-PDT device delivered an increased carrier lifetime and reduced the recombination in bulk probably because the defects were passivated by the K, which penetrated into the bulk region.

What's ahead in automated lumber grading

Treesearch

D. Earl Kline; Richard Conners; Philip A. Araman

1998-01-01

This paper discusses how present scanning technologies are being applied to automatic lumber grading. The presentation focuses on 1) what sensing and scanning devices are needed to measure information for accurate grading feature detection, 2) the hardware and software needed to efficiently process this information, and 3) specific issues related to softwood lumber...

Metamorphic Epitaxy for Multijunction Solar Cells

DOE Office of Scientific and Technical Information (OSTI.GOV)

France, Ryan M.; Dimroth, Frank; Grassman, Tyler J.

Multijunction solar cells have proven to be capable of extremely high efficiencies by combining multiple semiconductor materials with bandgaps tuned to the solar spectrum. Reaching the optimum set of semiconductors often requires combining high-quality materials with different lattice constants into a single device, a challenge particularly suited for metamorphic epitaxy. In this article, we describe different approaches to metamorphic multijunction solar cells, including traditional upright metamorphic, state-of-the-art inverted metamorphic, and forward-looking multijunction designs on silicon. We also describe the underlying materials science of graded buffers that enables metamorphic subcells with low dislocation densities. Following nearly two decades of research, recentmore » efforts have demonstrated high-quality lattice-mismatched multijunction solar cells with very little performance loss related to the mismatch, enabling solar-to-electric conversion efficiencies over 45%.« less

MEAT SCIENCE AND MUSCLE BIOLOGY SYMPOSIUM--anabolic implants and meat quality.

PubMed

Duckett, S K; Pratt, S L

2014-01-01

Anabolic implants are routinely used in the finishing phase of beef production to improve animal performance and feed efficiency. Implanting during the feedlot phase on average increases ADG 18%, feed intake 6%, feed efficiency 8%, carcass weight 5%, and ribeye area 4% compared with nonimplanted controls. Implants reduce the cost of beef production, which is important given current high feed costs and beef prices. In a 1996 review of 37 implant trials, the use of a combination (i.e., estrogenic and trenbolone acetate) implant increased returns by US$77/head compared with nonimplanted steers. If calculated using today's prices, a combination implant would increase returns by $163/head. However, concerns about potential negative effects of implants on marbling scores, quality grades, and tenderness exist. Changes in Warner-Bratzler shear force values of steaks from implanted steers are small (<0.5 kg) and appear related to an increase in initial tenderness, possibly due to hypertrophy of muscle fiber, instead of alterations in postmortem proteolysis. The increase in ribeye size observed with implanting may also reduce marbling scores through a dilution effect. The impact of anabolic implants on gene expression has shown that implanting downregulates expression of certain lipogenic genes (e.g., stearoyl-CoA desaturase, fatty acid synthetase, fatty acid elongase-6) in steers with low quality grades (Select-) but not in implanted steers with high quality grades (Choice-). Examination of the adipocyte's transcriptome has shown that 36 genes were differentially expressed due to implant treatment. More research is needed to further determine how anabolic implants alter lipogenic gene expression to address changes in marbling deposition with implant usage. Given our current high feed costs and cattle prices, anabolic implants are one of the most cost-effective technologies that can be used in beef production systems.

Detection of munitions grade g-series nerve agents using Raman excitation at 1064 nm

NASA Astrophysics Data System (ADS)

Roy, Eric; Wilcox, Phillip G.; Hoffland, Soren; Pardoe, Ian

2015-05-01

Raman spectroscopy is a powerful tool for obtaining molecular structure information of a sample. While Raman spectroscopy is a common laboratory based analytical tool, miniaturization of opto-electronic components has allowed handheld Raman analyzers to become commercially available. These handheld systems are utilized by Military and First Responder operators tasked with rapidly identifying potentially hazardous chemicals in the field. However, one limitation of many handheld Raman detection systems is strong interference caused by fluorescence of the sample or underlying surface which obscures the characteristic Raman signature of the target analyte. Munitions grade chemical warfare agents (CWAs) are produced and stored in large batches and typically have more impurities from the storage container, degradation, or unreacted precursors. In this work, Raman spectra of munitions grade CWAs were collected using a handheld Raman spectrometer with a 1064 nm excitation laser. While Raman scattering generated by a 1064 nm laser is inherently less efficient than excitation at shorter wavelengths, high quality spectra were easily obtained due to significantly reduced fluorescence of the munitions grade CWAs. The spectra of these less pure, but more operationally relevant, munitions grade CWAs were then compared to spectra of CASARM grade CWAs, as well as Raman spectra collected using the more common 785 nm excitation laser.

Membrane-free battery for harvesting low-grade thermal energy.

PubMed

Yang, Yuan; Loomis, James; Ghasemi, Hadi; Lee, Seok Woo; Wang, Yi Jenny; Cui, Yi; Chen, Gang

2014-11-12

Efficient and low-cost systems are desired to harvest the tremendous amount of energy stored in low-grade heat sources (<100 °C). An attractive approach is the thermally regenerative electrochemical cycle (TREC), which uses the dependence of electrode potential on temperature to construct a thermodynamic cycle for direct heat-to-electricity conversion. By varying the temperature, an electrochemical cell is charged at a lower voltage than discharged; thus, thermal energy is converted to electricity. Recently, a Prussian blue analog-based system with high efficiency has been demonstrated. However, the use of an ion-selective membrane in this system raises concerns about the overall cost, which is crucial for waste heat harvesting. Here, we report on a new membrane-free battery with a nickel hexacyanoferrate (NiHCF) cathode and a silver/silver chloride anode. The system has a temperature coefficient of -0.74 mV K(-1). When the battery is discharged at 15 °C and recharged at 55 °C, thermal-to-electricity conversion efficiencies of 2.6% and 3.5% are achieved with assumed heat recuperation of 50% and 70%, respctively. This work opens new opportunities for using membrane-free electrochemical systems to harvest waste heat.

Corrosion resistance of API 5L grade B steel with taro leaf (Colocasia esculenta) addition as corrosion inhibitor in HCl 0.1 M

NASA Astrophysics Data System (ADS)

Lestari, Yulinda; Priyotomo, Gadang

2018-05-01

Taro leaf (Colocasia esculenta) has the potential to be used as a corrosion inhibitor because it has a substance called polyphenol that binds to the hydroxyl group and essential amino acids. Taro leaf extract is taken by maceration method. In this study, the specimen was steel API 5L grade B that would measured the corosivity in 0.1 M HCl solution + taro leaf extract with a specific concentration (in ppm). Tests conducted by FTIR method taro leaves, potentiodynamic polarization (Tafel) and Electrochemical Impedance Spectroscopy (EIS). Based on the results revealed that there is a phenolic group in taro leaves, which has polyphenol content 0.053 % (mg/100 mg). The optimum composition of taro leaf extract is 4000 ppm which generate corrosion rate value of 30.22 mpy and efficiency inhibitor performance of 72.7 %. In this study, the Kads value of taro leaf extract ranged from 0.885 to greater than Kads value of ginger extract in hydrochloric acid solution. The high Kads values indicate a more efficient process of adsorption and better value of inhibition efficiency.

Fabrication of broadband quasi-omnidirectional antireflective surface on glass for photovoltaic application

NASA Astrophysics Data System (ADS)

Kumar, Arvind; Kumar, Praveen; Srinivas, G.; Jakeer Khan G., H.; Siju, Barshilia, Harish C.

2016-05-01

In this paper, we have demonstrated a simple and cost effective HF-vapor phase etching method to fabricate the broadband quasi-omnidirectional antireflective surface on glass substrate. Both-sides etched sodalime glass substrates under optimized conditions showed a broadband enhancement in the transmittance spectra with maximum transmittance as high as ~97% at 598 nm. FESEM results confirmed the formation of a graded nanoporous surface, which lowers it refractive index. The etched surface exhibited excellent AR property over a wide range of incidence angles (8°-48°), which is attributed due to the formation of graded porosity. Silicon solar cell covered with plain glass showed Isc of 0.123A and efficiency of 8.76%, while it showed Isc of 0.130A and efficiency of 9.2% when it was covered by etched glass. Furthermore, it exhibited an excellent anti-soiling property as compared to plain glass. All these results show its strong potential in the photovoltaic application.

Inertial aided cycle slip detection and identification for integrated PPP GPS and INS.

PubMed

Du, Shuang; Gao, Yang

2012-10-25

The recently developed integrated Precise Point Positioning (PPP) GPS/INS system can be useful to many applications, such as UAV navigation systems, land vehicle/machine automation and mobile mapping systems. Since carrier phase measurements are the primary observables in PPP GPS, cycle slips, which often occur due to high dynamics, signal obstructions and low satellite elevation, must be detected and repaired in order to ensure the navigation performance. In this research, a new algorithm of cycle slip detection and identification has been developed. With the aiding from INS, the proposed method jointly uses WL and EWL phase combinations to uniquely determine cycle slips in the L1 and L2 frequencies. To verify the efficiency of the algorithm, both tactical-grade and consumer-grade IMUs are tested by using a real dataset collected from two field tests. The results indicate that the proposed algorithm can efficiently detect and identify the cycle slips and subsequently improve the navigation performance of the integrated system.

Relieved kink effects in symmetrically graded In0.45Al0.55As/InxGa1-xAs metamorphic high-electron-mobility transistors

NASA Astrophysics Data System (ADS)

Lee, Ching-Sung; Liao, Chen-Hsian

2007-12-01

Kink effects in an In-rich InxGa1-xAs (x=0.53-0.63) linearly graded channel of an In0.45Al0.55As/InxGa1-xAs metamorphic high-electron-mobility transistor have been effectively relieved by depositing a high-barrier Ni /Au gate with the silicon nitride passivation. Complete physical investigations for the relieved kink effects have been made by comparing identical devices with/without a high-barrier Schottky gate or the surface passivation. After successfully suppressing the kink effects, the proposed device has shown a superior voltage gain of 173.8, low output conductance of 2.09mS/mm, and excellent power-added efficiency of 54.1% with high output power (power gain) of 14.87dBm (14.53dB). Improved linearity and excellent thermal threshold coefficient (∂Vth/∂T) of -0.14mV/K have also been achieved. The proposed design provides good potential for high-gain and high-linearity circuit applications.

Effects of High Pressure ORE Grinding on the Efficiency of Flotation Operations

NASA Astrophysics Data System (ADS)

Saramak, Daniel; Krawczykowska, Aldona; Młynarczykowska, Anna

2014-10-01

This article discusses issues related to the impact of the high pressure comminution process on the efficiency of the copper ore flotation operations. HPGR technology improves the efficiency of mineral resource enrichment through a better liberation of useful components from waste rock as well as more efficient comminution of the material. Research programme included the run of a laboratory flotation process for HPGR crushing products at different levels of operating pressures and moisture content. The test results showed that products of the high-pressure grinding rolls achieved better recoveries in flotation processes and showed a higher grade of useful components in the flotation concentrate, in comparison to the ball mill products. Upgrading curves have also been marked in the following arrangement: the content of useful component in concentrate the floatation recovery. All upgrading curves for HPGR products had a more favourable course in comparison to the curves of conventionally grinded ore. The results also indicate that various values of flotation recoveries have been obtained depending on the machine operating parameters (i.e. the operating pressure), and selected feed properties (moisture).

Design and demonstration of ultra-wide bandgap AlGaN tunnel junctions

DOE Office of Scientific and Technical Information (OSTI.GOV)

Zhang, Yuewei; Krishnamoorthy, Sriram; Akyol, Fatih

Ultra violet light emitting diodes (UV LEDs) face critical limitations in both the injection efficiency and the light extraction efficiency due to the resistive and absorbing p-type contact layers. In this work, we investigate the design and application of polarization engineered tunnel junctions for ultra-wide bandgap AlGaN (Al mole fraction >50%) materials towards highly efficient UV LEDs. We demonstrate that polarization-induced three dimensional charge is beneficial in reducing tunneling barriers especially for high composition AlGaN tunnel junctions. In addition, the design of graded tunnel junction structures could lead to low tunneling resistance below 10 –3 Ω cm 2 and lowmore » voltage consumption below 1 V (at 1 kA/cm 2) for high composition AlGaN tunnel junctions. Experimental demonstration of 292 nm emission was achieved through non-equilibrium hole injection into wide bandgap materials with bandgap energy larger than 4.7 eV, and detailed modeling of tunnel junctions shows that they can be engineered to have low resistance and can enable efficient emitters in the UV-C wavelength range.« less

Design and demonstration of ultra-wide bandgap AlGaN tunnel junctions

DOE PAGES

Zhang, Yuewei; Krishnamoorthy, Sriram; Akyol, Fatih; ...

2016-09-19

Ultra violet light emitting diodes (UV LEDs) face critical limitations in both the injection efficiency and the light extraction efficiency due to the resistive and absorbing p-type contact layers. In this work, we investigate the design and application of polarization engineered tunnel junctions for ultra-wide bandgap AlGaN (Al mole fraction >50%) materials towards highly efficient UV LEDs. We demonstrate that polarization-induced three dimensional charge is beneficial in reducing tunneling barriers especially for high composition AlGaN tunnel junctions. In addition, the design of graded tunnel junction structures could lead to low tunneling resistance below 10 –3 Ω cm 2 and lowmore » voltage consumption below 1 V (at 1 kA/cm 2) for high composition AlGaN tunnel junctions. Experimental demonstration of 292 nm emission was achieved through non-equilibrium hole injection into wide bandgap materials with bandgap energy larger than 4.7 eV, and detailed modeling of tunnel junctions shows that they can be engineered to have low resistance and can enable efficient emitters in the UV-C wavelength range.« less

Band gap grading and photovoltaic performance of solution-processed Cu(In,Ga)S2 thin-film solar cells.

PubMed

Sohn, So Hyeong; Han, Noh Soo; Park, Yong Jin; Park, Seung Min; An, Hee Sang; Kim, Dong-Wook; Min, Byoung Koun; Song, Jae Kyu

2014-12-28

The photophysical properties of CuInxGa1-xS2 (CIGS) thin films, prepared by solution-based coating methods, are investigated to understand the correlation between the optical properties of these films and the electrical characteristics of solar cells fabricated using these films. Photophysical properties, such as the depth-dependent band gap and carrier lifetime, turn out to be at play in determining the energy conversion efficiency of solar cells. A double grading of the band gap in CIGS films enhances solar cell efficiency, even when defect states disturb carrier collection by non-radiative decay. The combinational stacking of different density films leads to improved solar cell performance as well as efficient fabrication because a graded band gap and reduced shunt current increase carrier collection efficiency. The photodynamics of minority-carriers suggests that the suppression of defect states is a primary area of improvement in CIGS thin films prepared by solution-based methods.

The Decline of Comprehension-Based Silent Reading Efficiency in the United States: A Comparison of Current Data with Performance in 1960

ERIC Educational Resources Information Center

Spichtig, Alexandra N.; Hiebert, Elfrieda H.; Vorstius, Christian; Pascoe, Jeffrey P.; Pearson, P. David; Radach, Ralph

2016-01-01

The present study measured the comprehension-based silent reading efficiency of U.S. students in grades 2, 4, 6, 8, 10, and 12. Students read standardized grade-level passages while an eye movement recording system was used to measure reading rate, fixations (eye stops) per word, fixation durations, and regressions (right-to-left eye movements)…

Computer Grading As an Instructional Tool.

ERIC Educational Resources Information Center

Rottmann, Ray M.; Hudson, H. T.

1983-01-01

Describes computer grading system providing/storing scores and giving feedback to instructors on how students are performing on a day-to-day basis and how they are handling course concepts. Focuses on the hardware and software of this efficient computerized grading package, which can be used with classes of 250 students (or larger). (Author/JN)

Computer-aided design studies of the homopolar linear synchronous motor

NASA Astrophysics Data System (ADS)

Dawson, G. E.; Eastham, A. R.; Ong, R.

1984-09-01

The linear induction motor (LIM), as an urban transit drive, can provide good grade-climbing capabilities and propulsion/braking performance that is independent of steel wheel-rail adhesion. In view of its 10-12 mm airgap, the LIM is characterized by a low power factor-efficiency product of order 0.4. A synchronous machine offers high efficiency and controllable power factor. An assessment of the linear homopolar configuration of this machine is presented as an alternative to the LIM. Computer-aided design studies using the finite element technique have been conducted to identify a suitable machine design for urban transit propulsion.

Wireless energy transfer: Dielectric lens antennas for beam shaping in wireless power-transfer applications

NASA Astrophysics Data System (ADS)

Gonçalves, Ricardo; Carvalho, Nuno B.; Pinho, Pedro

2017-02-01

In the current contest of wireless systems, the last frontier remains the cut of the power cord. In that sense, the interest over wireless energy transfer technologies in the past years has grown exponentially. However, there are still many challenges to be overcome in order to enable wireless energy transfer full potential. One of the focus in the development of such systems is the design of very-high-gain, highly efficient, antennas that can compensate for the propagation loss of radio signals over the air. In this paper, we explore the design and manufacturing process of dielectric lenses, fabricated using a professional-grade desktop 3D printer. Lens antennas are used in order to increase beam efficiency and therefore maximize the efficiency of a wireless power-transfer system operating at microwave frequencies in the Ku band. Measurements of two fabricated prototypes showcase a large directivity, as predicted with simulations. xml:lang="fr"

High Efficiency - Reduced Emissions Boiler Systems for Steam, Heat, and Processing

DTIC Science & Technology

2012-07-01

obtaining Energy Star certification for the whole boiler system. Widespread boiler control updates could be possible by mandating their adoption and...Measurements of O2 and NOx are obtained by means of automotive grade yttria-stabilized zirconia sensors. This solution combines good sensitivity at...boiler and oil/gas burner configurations, extensibility to operation with nonconventional fuels (e.g. biogas and syngas). Applicability of the

The Role of Independent Activities in Development of Strategic Learning Competences and Increase of School Performance Level, within the Study of High School Pedagogy

ERIC Educational Resources Information Center

Anca, Monica-Iuliana; Bocos, Musata

2017-01-01

The experimental research performed by us with the purpose of exploring the possibilities of development of strategic learning competences and improvement of school performance of 11th grade students, pedagogical profile, specialisation in primary school-kindergarten teacher, falls in the category of researches aiming to make efficient certain…

Optimizing Segmental Bone Regeneration Using Functionally Graded Scaffolds

DTIC Science & Technology

2012-10-01

Such a model system would allow more realistic assessment of different clinical treatment options in a rapid, cost -efficient, and safe man- ner...along with MichealiseMenten kinetics. Genetic algorithm [37] was adopted to minimize the cost function in Equation (14). Fig. 3 shows that simulated...associated with autografts, such as high cost , requirement of additional surgeries, donor-site morbidity, and limiting autographs for the treatment

DWI-associated entire-tumor histogram analysis for the differentiation of low-grade prostate cancer from intermediate-high-grade prostate cancer.

PubMed

Wu, Chen-Jiang; Wang, Qing; Li, Hai; Wang, Xiao-Ning; Liu, Xi-Sheng; Shi, Hai-Bin; Zhang, Yu-Dong

2015-10-01

To investigate diagnostic efficiency of DWI using entire-tumor histogram analysis in differentiating the low-grade (LG) prostate cancer (PCa) from intermediate-high-grade (HG) PCa in comparison with conventional ROI-based measurement. DW images (b of 0-1400 s/mm(2)) from 126 pathology-confirmed PCa (diameter >0.5 cm) in 110 patients were retrospectively collected and processed by mono-exponential model. The measurement of tumor apparent diffusion coefficients (ADCs) was performed with using histogram-based and ROI-based approach, respectively. The diagnostic ability of ADCs from two methods for differentiating LG-PCa (Gleason score, GS ≤ 6) from HG-PCa (GS > 6) was determined by ROC regression, and compared by McNemar's test. There were 49 LG-tumor and 77 HG-tumor at pathologic findings. Histogram-based ADCs (mean, median, 10th and 90th) and ROI-based ADCs (mean) showed dominant relationships with ordinal GS of Pca (ρ = -0.225 to -0.406, p < 0.05). All above imaging indices reflected significant difference between LG-PCa and HG-PCa (all p values <0.01). Histogram 10th ADCs had dominantly high Az (0.738), Youden index (0.415), and positive likelihood ratio (LR+, 2.45) in stratifying tumor GS against mean, median and 90th ADCs, and ROI-based ADCs. Histogram mean, median, and 10th ADCs showed higher specificity (65.3%-74.1% vs. 44.9%, p < 0.01), but lower sensitivity (57.1%-71.3% vs. 84.4%, p < 0.05) than ROI-based ADCs in differentiating LG-PCa from HG-PCa. DWI-associated histogram analysis had higher specificity, Az, Youden index, and LR+ for differentiation of PCa Gleason grade than ROI-based approach.

Tunnel-injected sub 290 nm ultra-violet light emitting diodes with 2.8% external quantum efficiency

NASA Astrophysics Data System (ADS)

Zhang, Yuewei; Jamal-Eddine, Zane; Akyol, Fatih; Bajaj, Sanyam; Johnson, Jared M.; Calderon, Gabriel; Allerman, Andrew A.; Moseley, Michael W.; Armstrong, Andrew M.; Hwang, Jinwoo; Rajan, Siddharth

2018-02-01

We report on the high efficiency tunnel-injected ultraviolet light emitting diodes (UV LEDs) emitting at 287 nm. Deep UV LED performance has been limited by the severe internal light absorption in the p-type contact layers and low electrical injection efficiency due to poor p-type conduction. In this work, a polarization engineered Al0.65Ga0.35N/In0.2Ga0.8N tunnel junction layer is adopted for non-equilibrium hole injection to replace the conventionally used direct p-type contact. A reverse-graded AlGaN contact layer is further introduced to realize a low resistance contact to the top n-AlGaN layer. This led to the demonstration of a low tunnel junction resistance of 1.9 × 10-3 Ω cm2 obtained at 1 kA/cm2. Light emission at 287 nm with an on-wafer peak external quantum efficiency of 2.8% and a wall-plug efficiency of 1.1% was achieved. The measured power density at 1 kA/cm2 was 54.4 W/cm2, confirming the efficient hole injection through interband tunneling. With the benefits of the minimized internal absorption and efficient hole injection, a tunnel-injected UV LED structure could enable future high efficiency UV emitters.

OPTIGRAMI: Optimum lumber grade mix program for hardwood dimension parts

Treesearch

David G. Martens; Jr., Robert L. Nevel; Jr. Nevel

1985-01-01

With rapidly increasing lumber prices and shortages of some grades and species, the furniture industry must find ways to use its hardwood lumber resource more efficiently. A computer program called OPTIGRAMI is designed to help managers determine the best lumber to use in producing furniture parts. OPTIGRAMI determines the least-cost grade mix of lumber required to...

Leaching behavior of lanthanum, nickel and iron from spent catalyst using inorganic acids

NASA Astrophysics Data System (ADS)

Astuti, W.; Prilitasari, N. M.; Iskandar, Y.; Bratakusuma, D.; Petrus, H. T. B. M.

2018-01-01

Highly technological applications of rare earth metals (REs) and scarcity of supply have become an incentive torecover the REs from various resources, which include high grade and low grade ores, as well as recycledwaste materials. Spent hydrocracking catalyst contain lanthanum and a variety of valuable metals such as nickel and iron. This study investigated the recovery of lanthanum, nickel and iron from spent hydrocracking catalyst by leaching using various inorganic acid (sulfuric acid, hydrochloric acid, and nitric acid). The effect of acid concentration, type of acid and leaching temperature was conducted to study the leaching behavior of each valuable metal from spent-catalyst. It has been shown that it is possible to recover more than 90% of lanthanum, however the leaching efficiency of nickel and iron in this process was very low. It can be concluded that the leaching process is selective for lanthanum recovery from hydrocracking spent-catalyst.

A parallel graded-mesh FDTD algorithm for human-antenna interaction problems.

PubMed

Catarinucci, Luca; Tarricone, Luciano

2009-01-01

The finite difference time domain method (FDTD) is frequently used for the numerical solution of a wide variety of electromagnetic (EM) problems and, among them, those concerning human exposure to EM fields. In many practical cases related to the assessment of occupational EM exposure, large simulation domains are modeled and high space resolution adopted, so that strong memory and central processing unit power requirements have to be satisfied. To better afford the computational effort, the use of parallel computing is a winning approach; alternatively, subgridding techniques are often implemented. However, the simultaneous use of subgridding schemes and parallel algorithms is very new. In this paper, an easy-to-implement and highly-efficient parallel graded-mesh (GM) FDTD scheme is proposed and applied to human-antenna interaction problems, demonstrating its appropriateness in dealing with complex occupational tasks and showing its capability to guarantee the advantages of a traditional subgridding technique without affecting the parallel FDTD performance.

Carbon Flux Trapping: Highly Efficient Production of Polymer-Grade d-Lactic Acid with a Thermophilic d-Lactate Dehydrogenase.

PubMed

Li, Chao; Tao, Fei; Xu, Ping

2016-08-17

High production of polymer-grade d-lactic acid is urgently required, particularly for the synthesis of polylactic acid. High-temperature fermentation has multiple advantages, such as lower equipment requirement and energy consumption, which are essential for lowering operating costs. We identified and introduced a unique d-lactate dehydrogenase into a thermotolerant butane-2,3-diol-producing strain. Carbon flux "trapping" was achieved by a "trapping point" created by combination of the introduced enzyme and the host efflux pump, which afforded irreversible transport of d-lactic acid. The overall carbon flux of the engineered strain was significantly enhanced and was redistributed predominantly to d-lactic acid. Under optimized conditions at 50 °C, d-lactic acid reached the highest titer (226.6 g L(-1) ) reported to date. This discovery allows us to extend the carbon flux trapping strategy to engineering complex metabolic networks. © 2016 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Comparison of Tumor- and Bone Marrow-Derived Mesenchymal Stromal/Stem Cells from Patients with High-Grade Osteosarcoma

PubMed Central

Le Nail, Louis-Romée; Brennan, Meadhbh; Rosset, Philippe; Piloquet, Philippe; Pichon, Olivier; Le Caignec, Cédric; Crenn, Vincent; Layrolle, Pierre; Hérault, Olivier; De Pinieux, Gonzague

2018-01-01

Osteosarcoma (OS) is suspected to originate from dysfunctional mesenchymal stromal/stem cells (MSC). We sought to identify OS-derived cells (OSDC) with potential cancer stem cell (CSC) properties by comparing OSDC to MSC derived from bone marrow of patients. This study included in vitro characterization with sphere forming assays, differentiation assays, cytogenetic analysis, and in vivo investigations of their tumorigenicity and tumor supportive capacities. Primary cell lines were isolated from nine high-grade OS samples. All primary cell lines demonstrated stromal cell characteristics. Compared to MSC, OSDC presented a higher ability to form sphere clones, indicating a potential CSC phenotype, and were more efficient at differentiation towards osteoblasts. None of the OSDC displayed the complex chromosome rearrangements typical of high grade OS and none of them induced tumors in immunodeficient mice. However, two OSDC demonstrated focused genomic abnormalities. Three out of seven, and six out of seven OSDC showed a supportive role on local tumor development, and on metastatic progression to the lungs, respectively, when co-injected with OS cells in nude mice. The observation of OS-associated stromal cells with rare genetic abnormalities and with the capacity to sustain tumor progression may have implications for future tumor treatments. PMID:29494553

Selecting At-Risk First-Grade Readers for Early Intervention: Eliminating False Positives and Exploring the Promise of a Two-Stage Gated Screening Process

ERIC Educational Resources Information Center

Compton, Donald L.; Fuchs, Douglas; Fuchs, Lynn S.; Bouton, Bobette; Gilbert, Jennifer K.; Barquero, Laura A.; Cho, Eunsoo; Crouch, Robert C.

2010-01-01

The purposes of this study were (a) to identify measures that when added to a base 1st-grade screening battery help eliminate false positives and (b) to investigate gains in efficiency associated with a 2-stage gated screening procedure. We tested 355 children in the fall of 1st grade and assessed for reading difficulty at the end of 2nd grade.…

Inverse Opal Scaffolds with Gradations in Mineral Content for Spatial Control of Osteogenesis.

PubMed

Zhu, Chunlei; Qiu, Jichuan; Pongkitwitoon, Suphannee; Thomopoulos, Stavros; Xia, Younan

2018-05-30

The design and fabrication of inverse opal scaffolds with gradations in mineral content to achieve spatial control of osteogenesis are described. The gradient in mineral content is established via the diffusion-limited transport of hydroxyapatite nanoparticles in a closely packed lattice of gelatin microbeads. The mineral-graded scaffold has an array of uniform pores and interconnected windows to facilitate efficient transport of nutrients and metabolic wastes, ensuring high cell viability. The graded distribution of mineral content can provide biochemical and mechanical cues for spatially regulating the osteogenic differentiation of adipose-derived stromal cells. This new class of scaffolds holds promise for engineering the interfaces between mineralized and unmineralized tissues. © 2018 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Removing Chlorides From Metallurgical-Grade Silicon

NASA Technical Reports Server (NTRS)

Breneman, W. C.; Coleman, L. M.

1982-01-01

Process for making low-cost silicon for solar cells is further improved. Silane product recycled to feed stripper column converts some of heavy impurities to volatile ones that pass off at top of column with light wastes. Impurities--chlorides of arsenic, phosphorus, and boron-would otherwise be carried to subsequent distillations where they would be difficult to remove. Since only a small amount of silane is recycled, silicon production efficiency remains high.

The Effect of the 4MAT Method (Learning Styles and Brain Hemispheres) of Instruction on Achievement in Mathematics

ERIC Educational Resources Information Center

Tatar, Enver; Dikici, Ramazan

2009-01-01

The purpose of this study was to determine the efficiency of 4MAT method of instruction in which learning style and cerebral hemispheres are taken into account in teaching the binary operation and its properties in mathematics. The sample of this study comprised 58 ninth grade students in two separate classes in a high school. One of the classes…

Asphalt pavement aging and temperature dependent properties using functionally graded viscoelastic model

NASA Astrophysics Data System (ADS)

Dave, Eshan V.

Asphalt concrete pavements are inherently graded viscoelastic structures. Oxidative aging of asphalt binder and temperature cycling due to climatic conditions being the major cause of non-homogeneity. Current pavement analysis and simulation procedures dwell on the use of layered approach to account for these non-homogeneities. The conventional finite-element modeling (FEM) technique discretizes the problem domain into smaller elements, each with a unique constitutive property. However the assignment of unique material property description to an element in the FEM approach makes it an unattractive choice for simulation of problems with material non-homogeneities. Specialized elements such as "graded elements" allow for non-homogenous material property definitions within an element. This dissertation describes the development of graded viscoelastic finite element analysis method and its application for analysis of asphalt concrete pavements. Results show that the present research improves efficiency and accuracy of simulations for asphalt pavement systems. Some of the practical implications of this work include the new technique's capability for accurate analysis and design of asphalt pavements and overlay systems and for the determination of pavement performance with varying climatic conditions and amount of in-service age. Other application areas include simulation of functionally graded fiber-reinforced concrete, geotechnical materials, metal and metal composites at high temperatures, polymers, and several other naturally existing and engineered materials.

Sonographic findings of high-grade and non-high-grade ductal carcinoma in situ of the breast.

PubMed

Park, Ji-Sung; Park, Young-Mi; Kim, Eun-Kyung; Kim, Suk-Jung; Han, Sang-Suk; Lee, Sun-Joo; In, Hyun-Sin; Ryu, Ji-Hwa

2010-12-01

The purpose of this study was to differentiate between high-grade and non-high-grade ductal carcinoma in situ (DCIS) of the breast on sonography. From October 2003 to August 2009, 76 DCIS lesions in 73 women who underwent sonography and mammography were included in this study. Lesions were confirmed by mastectomy, breast-conserving surgery, or surgical biopsy. Images were analyzed by 2 radiologists with consensus and were correlated with histologic grades. Of the 76 lesions, 44 were classified as high--grade and 32 as non-high-grade DCIS. Fifty-seven lesions (75.0%) were identified on sonography, which revealed a mass in 30 cases, microcalcifications in 20, ductal changes in 4, and architectural distortion in 3. All cases with false-negative findings on sonography (n = 19) showed microcalcifications on mammography. On sonography, masses were more frequently found in non-high-grade (62.5%) than high-grade DCIS (22.7%; P < .01). No significant difference was seen in the sonographic features of masses between high-grade and non-high-grade DCIS. Microcalcifications were more common in high-grade (43.2%) than non-high-grade (3.1%) DCIS (P = .02). Most sonographically visible microcalcifications had associated findings such as ductal changes (n = 11), a mass (n = 7), or a hypoechoic area (n = 5). The detection rate of microcalcifications on sonography was higher in high-grade (62.9%) than non-high-grade DCIS (25.0%; P = .023). Microcalcifications with associated ductal changes (11 of 31 [35.5%]) were the most common sonographic findings in high-grade DCIS. An irregular hypoechoic mass with an indistinct and microlobulated margin (13 of 26 [50.0%]) was the most frequent finding in non-high-grade DCIS.

Enhancement of struvite pellets crystallization in a full-scale plant using an industrial grade magnesium product.

PubMed

Crutchik, D; Morales, N; Vázquez-Padín, J R; Garrido, J M

2017-02-01

A full-scale struvite crystallization system was operated for the treatment of the centrate obtained from the sludge anaerobic digester in a municipal wastewater treatment plant. Additionally, the feasibility of an industrial grade Mg(OH) 2 as a cheap magnesium and alkali source was also investigated. The struvite crystallization plant was operated for two different periods: period I, in which an influent with low phosphate concentration (34.0 mg P·L -1 ) was fed to the crystallization plant; and period II, in which an influent with higher phosphate concentration (68.0 mg P·L -1 ) was used. A high efficiency of phosphorus recovery by struvite crystallization was obtained, even when the effluent treated had a high level of alkalinity. Phosphorus recovery percentage was around 77%, with a phosphate concentration in the effluent between 10.0 and 30.0 mg P·L -1 . The experiments gained struvite pellets of 0.5-5.0 mm size. Moreover, the consumption of Mg(OH) 2 was estimated at 1.5 mol Mg added·mol P recovered -1 . Thus, industrial grade Mg(OH) 2 can be an economical alternative as magnesium and alkali sources for struvite crystallization at industrial scale.

Compositionally-graded silicon-copper helical arrays as anodes for lithium-ion batteries

NASA Astrophysics Data System (ADS)

Polat, Deniz B.; Keles, Ozgul; Amine, Khalil

2016-02-01

Restrictions in silicon based anodes have been the subject of many researches for years. As an innovative approach, we have adopted ion assisted deposition technique to glancing angle deposition method and have used compositionally-graded structuring. A unique helical shaped gradient film has been produced in which the Cu/Si atomic ratio decreases from the bottom to the top of the coating. With such a unique film (high surface area) more spaces have been created promoting mechanical integrity and reaction between active materials (silicon) with lithium ions. The highly adherent film is formed as a result of ion assisted deposition process and the gradual change in Cu/Si atomic ratio diverts stress through the helices. To compare the performance of the SiCu electrode, a pure Si film is deposited in the same experimental condition. Galvanostatic test results show that although the film with pure Si helices fails after 30th cycles, the compositionally graded anode exhibits a capacity of 1228 mAh g-1 at the 100th cycles with 99.5% coulombic efficiencies when cycled at 100 mA g-1, and delivers 815 mAh g-1 when cycled with a rate of 400 mA g-1.

High-power AlGaN-based near-ultraviolet light-emitting diodes grown on Si(111)

NASA Astrophysics Data System (ADS)

Li, Zengcheng; Liu, Legong; Huang, Yingnan; Sun, Qian; Feng, Meixin; Zhou, Yu; Zhao, Hanmin; Yang, Hui

2017-07-01

High-power AlGaN-based 385 nm near-ultraviolet light-emitting diodes (UVA-LEDs) grown on Si(111) substrates are reported. The threading dislocation (TD) density of AlGaN was reduced by employing an Al-composition step-graded AlN/AlGaN multilayer buffer. V-shaped pits were intentionally incorporated into the active region to screen the carriers from the nonradiative recombination centers (NRCs) around the TDs and to facilitate hole injection. The light extraction efficiency was enhanced by the surface roughening of a thin-film (TF) vertical chip structure. The as-fabricated TF-UVA-LED exhibited a light output power of 960 mW at 500 mA, corresponding to an external quantum efficiency of 59.7%.

Semiconductor-based narrow-line and high-brilliance 193-nm laser system for industrial applications

NASA Astrophysics Data System (ADS)

Opalevs, D.; Scholz, M.; Stuhler, J.; Gilfert, C.; Liu, L. J.; Wang, X. Y.; Vetter, A.; Kirner, R.; Scharf, T.; Noell, W.; Rockstuhl, C.; Li, R. K.; Chen, C. T.; Voelkel, R.; Leisching, P.

2018-02-01

We present a novel industrial-grade prototype version of a continuous-wave 193 nm laser system entirely based on solid state pump laser technology. Deep-ultraviolet emission is realized by frequency-quadrupling an amplified diode laser and up to 20 mW of optical power were generated using the nonlinear crystal KBBF. We demonstrate the lifetime of the laser system for different output power levels and environmental conditions. The high stability of our setup was proven in > 500 h measurements on a single spot, a crystal shifter multiplies the lifetime to match industrial requirements. This laser improves the relative intensity noise, brilliance, wall-plug efficiency and maintenance cost significantly. We discuss first lithographic experiments making use of this improvement in photon efficiency.

Analysis Reveals Impact of Road Grade on Vehicle Energy Use | News | NREL

Science.gov Websites

of modern automobiles is essential for designing increasingly efficient powertrains. In recent years more information, refer to the conference paper-Contribution of Road Grade to the Energy Use of Modern

A transposon and transposase system for human application.

PubMed

Hackett, Perry B; Largaespada, David A; Cooper, Laurence J N

2010-04-01

The stable introduction of therapeutic transgenes into human cells can be accomplished using viral and nonviral approaches. Transduction with clinical-grade recombinant viruses offers the potential of efficient gene transfer into primary cells and has a record of therapeutic successes. However, widespread application for gene therapy using viruses can be limited by their initially high cost of manufacture at a limited number of production facilities as well as a propensity for nonrandom patterns of integration. The ex vivo application of transposon-mediated gene transfer now offers an alternative to the use of viral vectors. Clinical-grade DNA plasmids can be prepared at much reduced cost and with lower immunogenicity, and the integration efficiency can be improved by the transient coexpression of a hyperactive transposase. This has facilitated the design of human trials using the Sleeping Beauty (SB) transposon system to introduce a chimeric antigen receptor (CAR) to redirect the specificity of human T cells. This review examines the rationale and safety implications of application of the SB system to genetically modify T cells to be manufactured in compliance with current good manufacturing practice (cGMP) for phase I/II trials.

High dose rate brachytherapy with customized applicators for malignant facial skin lesions.

PubMed

Jumeau, R; Renard-Oldrini, S; Courrech, F; Buchheit, I; Oldrini, G; Vogin, G; Peiffert, D

2016-07-01

Brachytherapy is a well-known treatment in the management of skin tumors. For facial or scalp lesions, applicators have been developed to deliver non-invasive treatment. We present cases treated with customized applicators with high dose rate system. Patients with poor performance status treated for malignant skin lesions of the scalp or the facial skin between 2011 and 2014 were studied. Afterloading devices were chosen between Freiburg(®) Flap, silicone-mold or wax applicators. The clinical target volume (CTV) was created by adding margins to lesions (10mm to 20mm). The dose schedules were 25Gy in five fractions for postoperative lesions, 30Gy in six fractions for exclusive treatments and a single session of 8Gy could be considered for palliative treatments. In 30 months, 11 patients received a treatment for a total of 12 lesions. The median age was 80 years. The median follow-up was 17 months and the 2-year local control rate was 91%. The mean CTV surface was 41.1cm(2) with a mean thickness of 6.1mm. We conceived three wax applicators, used our silicone-mold eight times and the Freiburg(®) Flap one time. We observed only low-grade radiodermitis (grade I: 50%, grade II: 33%), and no high-grade skin toxicity. High dose rate brachytherapy with customized applicators for facial skin and scalp lesions is efficient and safe. It is a good modality to treat complex lesions in patients unfit for invasive treatment. Copyright © 2016 Société française de radiothérapie oncologique (SFRO). Published by Elsevier SAS. All rights reserved.

Application of a Simplified Method for Estimating Perfusion Derived from Diffusion-Weighted MR Imaging in Glioma Grading.

PubMed

Cao, Mengqiu; Suo, Shiteng; Han, Xu; Jin, Ke; Sun, Yawen; Wang, Yao; Ding, Weina; Qu, Jianxun; Zhang, Xiaohua; Zhou, Yan

2017-01-01

Purpose : To evaluate the feasibility of a simplified method based on diffusion-weighted imaging (DWI) acquired with three b -values to measure tissue perfusion linked to microcirculation, to validate it against from perfusion-related parameters derived from intravoxel incoherent motion (IVIM) and dynamic contrast-enhanced (DCE) magnetic resonance (MR) imaging, and to investigate its utility to differentiate low- from high-grade gliomas. Materials and Methods : The prospective study was approved by the local institutional review board and written informed consent was obtained from all patients. From May 2016 and May 2017, 50 patients confirmed with glioma were assessed with multi- b -value DWI and DCE MR imaging at 3.0 T. Besides conventional apparent diffusion coefficient (ADC 0,1000 ) map, perfusion-related parametric maps for IVIM-derived perfusion fraction ( f ) and pseudodiffusion coefficient (D*), DCE MR imaging-derived pharmacokinetic metrics, including K trans , v e and v p , as well as a metric named simplified perfusion fraction (SPF), were generated. Correlation between perfusion-related parameters was analyzed by using the Spearman rank correlation. All imaging parameters were compared between the low-grade ( n = 19) and high-grade ( n = 31) groups by using the Mann-Whitney U test. The diagnostic performance for tumor grading was evaluated with receiver operating characteristic (ROC) analysis. Results : SPF showed strong correlation with IVIM-derived f and D* ( ρ = 0.732 and 0.716, respectively; both P < 0.001). Compared with f , SPF was more correlated with DCE MR imaging-derived K trans ( ρ = 0.607; P < 0.001) and v p ( ρ = 0.397; P = 0.004). Among all parameters, SPF achieved the highest accuracy for differentiating low- from high-grade gliomas, with an area under the ROC curve value of 0.942, which was significantly higher than that of ADC 0,1000 ( P = 0.004). By using SPF as a discriminative index, the diagnostic sensitivity and specificity were 87.1% and 94.7%, respectively, at the optimal cut-off value of 19.26%. Conclusion : The simplified method to measure tissue perfusion based on DWI by using three b -values may be helpful to differentiate low- from high-grade gliomas. SPF may serve as a valuable alternative to measure tumor perfusion in gliomas in a noninvasive, convenient and efficient way.

Performance improvement of AlGaN-based deep-ultraviolet light-emitting diodes via Al-composition graded quantum wells

NASA Astrophysics Data System (ADS)

Lu, Lin; Zhang, Yu; Xu, Fujun; Ding, Gege; Liu, Yuhang

2018-06-01

Characteristics of AlGaN-based deep-ultraviolet light-emitting diodes (DUV-LEDs) with step-like and Al-composition graded quantum wells have been investigated. The simulation results show that compared to DUV-LEDs with the conventional AlGaN multiple quantum wells (MQWs) structure, the light output power (LOP) and efficiency droop of DUV-LEDs with the Al-composition graded wells were remarkably improved. The key factor accounting for the improved performance is ascribed to the better modulation of carrier distribution in the quantum wells to increase the overlap between electron and hole wavefunctions, which contributes to more efficient recombination of electrons and holes, and thereby a significant enhancement in the LOP.

Optimization of Process Parameters for High Efficiency Laser Forming of Advanced High Strength Steels within Metallurgical Constraints

NASA Astrophysics Data System (ADS)

Sheikholeslami, Ghazal; Griffiths, Jonathan; Dearden, Geoff; Edwardson, Stuart P.

Laser forming (LF) has been shown to be a viable alternative to form automotive grade advanced high strength steels (AHSS). Due to their high strength, heat sensitivity and low conventional formability show early fractures, larger springback, batch-to-batch inconsistency and high tool wear. In this paper, optimisation of the LF process parameters has been conducted to further understand the impact of a surface heat treatment on DP1000. A FE numerical simulation has been developed to analyse the dynamic thermo-mechanical effects. This has been verified against empirical data. The goal of the optimisation has been to develop a usable process window for the LF of AHSS within strict metallurgical constraints. Results indicate it is possible to LF this material, however a complex relationship has been found between the generation and maintenance of hardness values in the heated zone. A laser surface hardening effect has been observed that could be beneficial to the efficiency of the process.

Exceptionally omnidirectional broadband light harvesting scheme for multi-junction concentrator solar cells achieved via ZnO nanoneedles

NASA Astrophysics Data System (ADS)

Yeh, Li-Ko; Tian, Wei-Cheng; Lai, Kun-Yu; He-Hau, Jr.

2016-12-01

GaInP/GaAs/Ge triple-junction concentrator solar cells with significant efficiency enhancement were demonstrated with antireflective ZnO nanoneedles. The novel nanostructure was attained with a Zn(NO3)2-based solution containing vitamin C. Under one sun AM 1.5G solar spectrum, conversion efficiency of the triple-junction device was improved by 23.7% via broadband improvement in short-circuit currents of 3 sub-cells after the coverage by the nanoneedles with a graded refractive index profile. The efficiency enhancement further went up to 45.8% at 100 suns. The performance boost through the nanoneedles also became increasingly pronounced in the conditions of high incident angles and the cloudy weather, e.g. 220.0% of efficiency enhancement was observed at the incident angle of 60°. These results were attributed to the exceptional broadband omnidirectionality of the antireflective nanoneedles.

A Study of Air Force Company Grade Officer Value Systems in Selected Career Fields and Their Correlation with Career Intentions.

DTIC Science & Technology

1989-09-01

Groups of People Employee Welfare Government High Productivity Nanagers Organizational Efficiency Ne ny Boss Personal Goals of Individuals Ideas...34, . . there is general agreement that the satisfaction or thwarting of expectations has pronounced effects on employee motivation" (19:27). He states...that factors other than job satisfaction, such as environmental affects, contribute to employee retention (19:35). In conclusion Nadia states that

Large area tunnel oxide passivated rear contact n -type Si solar cells with 21.2% efficiency: Large area tunnel oxide passivated rear contact n -type Si solar cells

DOE Office of Scientific and Technical Information (OSTI.GOV)

Tao, Yuguo; Upadhyaya, Vijaykumar; Chen, Chia-Wei

This paper reports on the implementation of carrier-selective tunnel oxide passivated rear contact for high-efficiency screen-printed large area n-type front junction crystalline Si solar cells. It is shown that the tunnel oxide grown in nitric acid at room temperature (25°C) and capped with n+ polysilicon layer provides excellent rear contact passivation with implied open-circuit voltage iVoc of 714mV and saturation current density J0b of 10.3 fA/cm2 for the back surface field region. The durability of this passivation scheme is also investigated for a back-end high temperature process. In combination with an ion-implanted Al2O3-passivated boron emitter and screen-printed front metal grids,more » this passivated rear contact enabled 21.2% efficient front junction Si solar cells on 239 cm2 commercial grade n-type Czochralski wafers.« less

From by-product to valuable components: Efficient enzymatic conversion of lactose in whey using β-galactosidase from Streptococcus thermophilus.

PubMed

Geiger, Barbara; Nguyen, Hoang-Minh; Wenig, Stefanie; Nguyen, Hoang Anh; Lorenz, Cindy; Kittl, Roman; Mathiesen, Geir; Eijsink, Vincent G H; Haltrich, Dietmar; Nguyen, Thu-Ha

2016-12-15

β-Galactosidase from Streptococcus thermophilus was overexpressed in a food-grade organism, Lactobacillus plantarum WCFS1. Laboratory cultivations yielded 11,000 U of β-galactosidase activity per liter of culture corresponding to approximately 170 mg of enzyme. Crude cell-free enzyme extracts obtained by cell disruption and subsequent removal of cell debris showed high stability and were used for conversion of lactose in whey permeate. The enzyme showed high transgalactosylation activity. When using an initial concentration of whey permeate corresponding to 205 g L -1 lactose, the maximum yield of galacto-oligosaccharides (GOS) obtained at 50°C reached approximately 50% of total sugar at 90% lactose conversion, meaning that efficient valorization of the whey lactose was obtained. GOS are of great interest for both human and animal nutrition; thus, efficient conversion of lactose in whey into GOS using an enzymatic approach will not only decrease the environmental impact of whey disposal, but also create additional value.

Cost-Effectiveness of High-Risk Human Papillomavirus Testing With Messenger RNA Versus DNA Under United States Guidelines for Cervical Cancer Screening.

PubMed

Ting, Jie; Smith, Jennifer S; Myers, Evan R

2015-10-01

To compare the cost-effectiveness of high-risk human papillomavirus (hrHPV) testing using a hrHPV DNA and a hrHPV messenger RNA (mRNA) assay under current US cervical cancer screening guidelines. We constructed a Markov model for stochastic cost-effectiveness analysis using published data. We compared screening efficiency using DNA and mRNA testing for the following: (1) cotesting with cytology in women 30 to 65 years, and (2) triage of women with mild cervical cytological abnormalities (atypical squamous cells of undetermined significance [ASC-US]) in the United States. Screening end point is histologically confirmed high-grade lesions (cervical intraepithelial neoplasia grade 2, 3, or invasive cancer). Sensitivity and specificity estimates of DNA and mRNA testing to detect cervical intraepithelial neoplasia grade 2, 3, or invasive cancer were obtained from 2 published trials: the US Clinical Evaluation of APTIMA mRNA (CLEAR) study for ASC-US triage and the French APTIMA Screening Evaluation (FASE) study for cotesting. Costs of DNA and mRNA testing were assumed identical. Costs of screening, diagnosis, and treatment of cervical neoplasia and cancer were from previously published estimates, adjusted to 2012 US dollars. Inputs were modeled as distributions for Monte Carlo probabilistic sensitivity analysis. Model outcomes were costs per life-year saved for each strategy, discounted at 3% annually. For both cotesting and ASC-US triage, mRNA testing cost less than DNA testing, whereas life expectancies were widely overlapping. There was a 100% probability that DNA testing was not cost-effective at $100,000/life-year saved threshold for ASC-US triage and a 55% probability that DNA testing was not cost-effective at the same threshold for cotesting. Based on the available evidence, mRNA testing for cotesting or ASC-US triage is likely to be more efficient than DNA testing under current US cervical cancer screening guidelines.

Development of a Field Demonstration for Cost-Effective Low-Grade Heat Recovery and Use Technology Designed to Improve Efficiency and Reduce Water Usage Rates for a Coal-Fired Power Plant

DOE Office of Scientific and Technical Information (OSTI.GOV)

Noble, Russell; Dombrowski, K.; Bernau, M.

Coal-based power generation systems provide reliable, low-cost power to the domestic energy sector. These systems consume large amounts of fuel and water to produce electricity and are the target of pending regulations that may require reductions in water use and improvements in thermal efficiency. While efficiency of coal-based generation has improved over time, coal power plants often do not utilize the low-grade heat contained in the flue gas and require large volumes of water for the steam cycle make-up, environmental controls, and for process cooling and heating. Low-grade heat recovery is particularly challenging for coal-fired applications, due in large partmore » to the condensation of acid as the flue gas cools and the resulting potential corrosion of the heat recovery materials. Such systems have also not been of significant interest as recent investments on coal power plants have primarily been for environmental controls due to more stringent regulations. Also, in many regions, fuel cost is still a pass-through to the consumer, reducing the motivation for efficiency improvements. Therefore, a commercial system combining low-grade heat-recovery technologies and associated end uses to cost effectively improve efficiency and/or reduce water consumption has not yet been widely applied. However, pressures from potential new regulations and from water shortages may drive new interest, particularly in the U.S. In an effort to address this issue, the U.S. Department of Energy (DOE) has sought to identify and promote technologies to achieve this goal.« less

Growth of Compounding Awareness Predicts Reading Comprehension in Young Chinese Students: A Longitudinal Study from Grade 1 to Grade 2

ERIC Educational Resources Information Center

Cheng, Yahua; Zhang, Jie; Li, Hong; Wu, Xinchun; Liu, Hongyun; Dong, Qiong; Li, Liping; Nguyen, Thi Phuong; Zheng, Minglu; Zhao, Ying; Sun, Peng

2017-01-01

Using a longitudinal sample of young Chinese students (fall and spring in grades 1 and 2: times 1-4, respectively) and growth curve analysis, this study examined whether the initial status and growth rates of compounding awareness from time 1 to time 4 uniquely contribute to reading comprehension at time 4 and whether word-reading efficiency at…

Computational Study of a Functionally Graded Ceramic-Metallic Armor

DTIC Science & Technology

2006-12-15

UNCLAS –Dist. A - Approved for public release Computational Study of a Functionally Graded Ceramic-Metallic Armor Douglas W. Templeton1, Tara J...efficiency of a postulated FGM ceramic-metallic armor system composed of aluminum nitride (AlN) and aluminum. The study had two primary...2006 2. REPORT TYPE N/ A 3. DATES COVERED - 4. TITLE AND SUBTITLE Computational Study of a Functionally Graded Ceramic-Metallic Armor 5a

DOE Office of Scientific and Technical Information (OSTI.GOV)

Cheng, Liwen, E-mail: lwcheng@yzu.edu.cn; Wu, Shudong; Xia, Changquan

In this work, graded barrier InGaN light-emitting diodes with increasing indium composition barriers are proposed and investigated numerically. When the conventional GaN barriers are replaced by this unique graded InGaN barrier design, the forward voltage at 100 mA is reduced from 3.32 V to 3.27 V, and the efficiency droop is improved from 46.6% to 7.5%. The simulation results observed in this work indicate that these improvements can be attributed to increased electron confinement and enhanced hole injection efficiency caused by the modified energy band diagram.

Optimizing the Efficiency of Tennessee Prekindergarten through Twelfth Grade Public Education

ERIC Educational Resources Information Center

Ellerbrook, James Eric

2016-01-01

Previous studies that assess public school district efficiency have been restricted in practical research. Most studies base efficiency on student achievement, which can be convoluted due to the demographics of a public school district. The purpose of this study was to determine the efficiency of public education in a more meaningful way. This…

Influence of functionally graded pores on bone ingrowth in cementless hip prosthesis: a finite element study using mechano-regulatory algorithm.

PubMed

Tarlochan, Faris; Mehboob, Hassan; Mehboob, Ali; Chang, Seung-Hwan

2018-06-01

Cementless hip prostheses with porous outer coating are commonly used to repair the proximally damaged femurs. It has been demonstrated that stability of prosthesis is also highly dependent on the bone ingrowth into the porous texture. Bone ingrowth is influenced by the mechanical environment produced in the callus. In this study, bone ingrowth into the porous structure was predicted by using a mechano-regulatory model. Homogenously distributed pores (200 and 800 [Formula: see text]m in diameter) and functionally graded pores along the length of the prosthesis were introduced as a porous coating. Bone ingrowth was simulated using 25 and 12 [Formula: see text]m micromovements. Load control simulations were carried out instead of traditionally used displacement control. Spatial and temporal distributions of tissues were predicted in all cases. Functionally graded pore decreasing models gave the most homogenous bone distribution, the highest bone ingrowth (98%) with highest average Young's modulus of all tissue phenotypes approximately 4.1 GPa. Besides this, the volume of the initial callus increased to 8.33% in functionally graded pores as compared to the 200 [Formula: see text]m pore size models which increased the bone volume. These findings indicate that functionally graded porous surface promote bone ingrowth efficiently which can be considered to design of surface texture of hip prosthesis.

Efficient semiconductor light-emitting device and method

DOEpatents

Choquette, Kent D.; Lear, Kevin L.; Schneider, Jr., Richard P.

1996-01-01

A semiconductor light-emitting device and method. The semiconductor light-emitting device is provided with at least one control layer or control region which includes an annular oxidized portion thereof to channel an injection current into the active region, and to provide a lateral refractive index profile for index guiding the light generated within the device. A periodic composition grading of at least one of the mirror stacks in the device provides a reduced operating voltage of the device. The semiconductor light-emitting device has a high efficiency for light generation, and may be formed either as a resonant-cavity light-emitting diode (RCLED) or as a vertical-cavity surface-emitting laser (VCSEL).

Efficient semiconductor light-emitting device and method

DOEpatents

Choquette, K.D.; Lear, K.L.; Schneider, R.P. Jr.

1996-02-20

A semiconductor light-emitting device and method are disclosed. The semiconductor light-emitting device is provided with at least one control layer or control region which includes an annular oxidized portion thereof to channel an injection current into the active region, and to provide a lateral refractive index profile for index guiding the light generated within the device. A periodic composition grading of at least one of the mirror stacks in the device provides a reduced operating voltage of the device. The semiconductor light-emitting device has a high efficiency for light generation, and may be formed either as a resonant-cavity light-emitting diode (RCLED) or as a vertical-cavity surface-emitting laser (VCSEL). 12 figs.

Significantly greater expression of ER, PR, and ECAD in advanced-stage low-grade ovarian serous carcinoma as revealed by immunohistochemical analysis.

PubMed

Wong, Kwong-Kwok; Lu, Karen H; Malpica, Anais; Bodurka, Diane C; Shvartsman, Hyun S; Schmandt, Rosemarie E; Thornton, Angela D; Deavers, Michael T; Silva, Elvio G; Gershenson, David M

2007-10-01

A 2-tier system that classifies ovarian serous carcinoma (OSC) as low grade or high grade is gaining acceptance. Women with low-grade OSC generally have higher 5-year survival rates than do women with high-grade OSC. We examined the expression of various markers to further understand the molecular differences between low-grade and high-grade OSCs: the potential therapeutic targets or prognostic markers Her-2/neu, estrogen receptor, and progesterone receptor (PR); the metastasis-associated markers cyclin D1 (BCL1), E-cadherin, matrix metalloproteinase (MMP) 2, and MMP-9; and the cell proliferation-associated markers BCL1, Ki-67 antigen (Ki-67), and p53. For this immunohistochemical analysis, we used paraffin-embedded specimens from 47 patients with advanced-stage low-grade OSC and from 49 patients with advanced-stage high-grade OSC. Our results showed that low-grade tumors expressed significantly higher levels of estrogen receptor, PR, and E-cadherin than did high-grade tumors, suggesting the involvement of gonadal steroid hormones, especially in the pathogenesis of low-grade OSC; the PR positivity was also observed in the stromal component of these low-grade tumors. On the other hand, high-grade tumors trended toward increased expression of MMP-9, BCL1, p53, and Ki-67, and robust MMP-9 positivity was observed in the stromal component of these high-grade tumors. These differences may lead to the development of different therapeutic strategies for women with either the low-grade or the high-grade form of OSC.

Efficiency analysis of betavoltaic elements

NASA Astrophysics Data System (ADS)

Sachenko, A. V.; Shkrebtii, A. I.; Korkishko, R. M.; Kostylyov, V. P.; Kulish, M. R.; Sokolovskyi, I. O.

2015-09-01

The conversion of energy of electrons produced by a radioactive β-source into electricity in a Si and SiC p- n junctions is modeled. The features of the generation function that describes the electron-hole pair production by an electron flux and the emergence of a "dead layer" are discussed. The collection efficiency Q that describes the rate of electron-hole pair production by incident beta particles, is calculated taking into account the presence of the dead layer. It is shown that in the case of high-grade Si p- n junctions, the collection efficiency of electron-hole pairs created by a high-energy electrons flux (such as, e.g., Pm-147 beta flux) is close or equal to unity in a wide range of electron energies. For SiC p-n junctions, Q is near unity only for electrons with relatively low energies of about 5 keV (produced, e.g., by a tritium source) and decreases rapidly with further increase of electron energy. The conditions, under which the influence of the dead layer on the collection efficiency is negligible, are determined. The open-circuit voltage is calculated for realistic values of the minority carriers' diffusion coefficients and lifetimes in Si and SiC p- n junctions, irradiated by a high-energy electrons flux. Our calculations allow to estimate the attainable efficiency of betavoltaic elements.

Treatment of petroleum refinery wastewater using a sequential anaerobic-aerobic moving-bed biofilm reactor system based on suspended ceramsite.

PubMed

Lu, Mang; Gu, Li-Peng; Xu, Wen-Hao

2013-01-01

In this study, a novel suspended ceramsite was prepared, which has high strength, optimum density (close to water), and high porosity. The ceramsite was used to feed a moving-bed biofilm reactor (MBBR) system with an anaerobic-aerobic (A/O) arrangement to treat petroleum refinery wastewater for simultaneous removal of chemical oxygen demand (COD) and ammonium. The hydraulic retention time (HRT) of the anaerobic-aerobic MBBR system was varied from 72 to 18 h. The anaerobic-aerobic system had a strong tolerance to shock loading. Compared with the professional emission standard of China, the effluent concentrations of COD and NH3-N in the system could satisfy grade I at HRTs of 72 and 36 h, and grade II at HRT of 18 h. The average sludge yield of the anaerobic reactor was estimated to be 0.0575 g suspended solid/g CODremoved. This work demonstrated that the anaerobic-aerobic MBBR system using the suspended ceramsite as bio-carrier could be applied to achieving high wastewater treatment efficiency.

Holmium laser enucleation of the prostate for treatment for large-sized benign prostate hyperplasia; is it a realistic endourologic alternative in developing country?

PubMed

Elshal, Ahmed M; Mekkawy, Ramy; Laymon, Mahmoud; Barakat, Tamer S; Elsaadany, Mohamed M; El-Assmy, Ahmed; El-Nahas, Ahmed R

2016-03-01

To assess the functional outcome and cumulative health-resource-related cost of holmium laser enucleation of the prostate (HoLEP) in comparison with transvesical open prostatectomy (TVOP) in a developing country. Matching of 92 HoLEP and 91 TVOP procedures was performed using resected prostate tissue weight as a sole matching criterion. Safety, efficacy, and accordingly health-related cost-efficiency of both procedures were statistically compared. Preoperative criteria and mean prostate size (166.7 ± 49.7, 161.4 ± 35.7 ml) were similar in HoLEP and TVOP, respectively; however, HoLEP treated more comorbid patients. Blood transfusion was 2.1 and 26.1 % after HoLEP and TVOP, respectively (P = 0.001). Median time to catheter removal and hospital stay was 2 days after HoLEP and 5 and 9 days, respectively, after TVOP (P < 0.001). On modified Clavien scale, grade per grade, there was no statistically significant difference between the two groups apart from local wound complications in TVOP group. High-grade complications (≥ grade 3) were reported in 3.2 and 6.5 % in HoLEP and TVOP, respectively (P = 0.49). Resected prostate tissue weight was independently associated with high-grade periprocedure complications (OR[95 %CI] 1.22[1.02:1.49], P = 0.03). Last follow-up symptom score, peak urine flow rate, residual urine, % PSA reduction, and need for reoperation were comparable between the two groups. HoLEP costs the hospital in the first 3 months 4111.8EP (575US$) versus 4305.4EP (602US$) for TVOP (P = 0.09). In high-volume hospital, HoLEP procedure seems to be equally safe and effective as TVOP with the advantages of minimally invasive procedures. Two years after adopting the technique, HoLEP equally costs the hospital as TVOP. Significant hospital cost savings are anticipated in subsequent cases.

The acid tolerant L-arabinose isomerase from the food grade Lactobacillus sakei 23K is an attractive D-tagatose producer.

PubMed

Rhimi, Moez; Ilhammami, Rimeh; Bajic, Goran; Boudebbouze, Samira; Maguin, Emmanuelle; Haser, Richard; Aghajari, Nushin

2010-12-01

The araA gene encoding an L-arabinose isomerase (L-AI) from the psychrotrophic and food grade Lactobacillus sakei 23K was cloned, sequenced and over-expressed in Escherichia coli. The recombinant enzyme has an apparent molecular weight of nearly 220 kDa, suggesting it is a tetramer of four 54 kDa monomers. The enzyme is distinguishable from previously reported L-AIs by its high activity and stability at temperatures from 4 to 40 degrees C, and pH from 3 to 8, and by its low metal requirement of only 0.8 mM Mn(2+) and 0.8 mM Mg(2+) for its maximal activity and thermostability. Enzyme kinetic studies showed that this enzyme displays a high catalytic efficiency allowing D-galactose bioconversion rates of 20% and 36% at 10 and 45 degrees C, respectively, which are useful for commercial production of D-tagatose. 2010 Elsevier Ltd. All rights reserved.

Metamorphic InAsSb/AlInAsSb Heterostructures for Optoelectronic Applications

DTIC Science & Technology

2013-03-20

respectively. VC 2013 American Institute of Physics. [http://dx.doi.org/10.1063/1.4796181] The development of highly efficient light emitting devi...C12 elastic constants 14 and the standard relationship between strains in perpendicular directions (e ¼ 2 c12c11 ejj) 15 we deter- mined the residual...line as the cloud of reflexes from the pseudomorphic part of the compositionally graded buffers. To obtain information about electroluminescence char

Can we build an efficient response to the prescription drug abuse epidemic? Assessing the cost effectiveness of universal prevention in the PROSPER trial.

PubMed

Crowley, D Max; Jones, Damon E; Coffman, Donna L; Greenberg, Mark T

2014-05-01

Prescription drug abuse has reached epidemic proportions. Nonmedical prescription opioid use carries increasingly high costs. Despite the need to cultivate efforts that are both effective and fiscally responsible, the cost-effectiveness of universal evidence-based-preventive-interventions (EBPIs) is rarely evaluated. This study explores the performance of these programs to reduce nonmedical prescription opioid use. Sixth graders from twenty-eight rural public school districts in Iowa and Pennsylvania were blocked by size and geographic location and then randomly assigned to experimental or control conditions (2002-2010). Within the intervention communities, prevention teams selected a universal family and school program from a menu of EBPIs. All families were offered a family-based program in the 6th grade and received one of three school-based programs in 7th-grade. The effectiveness and cost-effectiveness of each school program by itself and with an additional family-based program were assessed using propensity and marginal structural models. This work demonstrates that universal school-based EBPIs can efficiently reduce nonmedical prescription opioid use. Further, findings illustrate that family-based programs may be used to enhance the cost-effectiveness of school-based programs. Universal EBPIs can effectively and efficiently reduce nonmedical prescription opioid use. These programs should be further considered when developing comprehensive responses to this growing national crisis. Copyright © 2014 Elsevier Inc. All rights reserved.

Technical Efficiency and Productivity for Higher Education Institutions in Sweden

ERIC Educational Resources Information Center

Andersson, C.; Antelius, J.; Månsson, J.; Sund, K.

2017-01-01

This study investigates technical efficiency and productivity for Swedish higher education institutions (HEIs). One identified problem in previous research concerns adjusting efficiency scores for input quality. This problem is avoided using grades from upper-secondary schools. A second problem concerns heterogeneity with respect to subjects and…

Guidelines for application of fluorescent lamps in high-performance avionic backlight systems

NASA Astrophysics Data System (ADS)

Syroid, Daniel D.

1997-07-01

Fluorescent lamps have proven to be well suited for use in high performance avionic backlight systems as demonstrated by numerous production applications for both commercial and military cockpit displays. Cockpit display applications include: Boeing 777, new 737s, F-15, F-16, F-18, F-22, C- 130, Navy P3, NASA Space Shuttle and many others. Fluorescent lamp based backlights provide high luminance, high lumen efficiency, precision chromaticity and long life for avionic active matrix liquid crystal display applications. Lamps have been produced in many sizes and shapes. Lamp diameters range from 2.6 mm to over 20 mm and lengths for the larger diameter lamps range to over one meter. Highly convoluted serpentine lamp configurations are common as are both hot and cold cathode electrode designs. This paper will review fluorescent lamp operating principles, discuss typical requirements for avionic grade lamps, compare avionic and laptop backlight designs and provide guidelines for the proper application of lamps and performance choices that must be made to attain optimum system performance considering high luminance output, system efficiency, dimming range and cost.

Natural history of nonoperative management for grade 4 and 5 liver and spleen injuries in children.

PubMed

Yang, Jeannie C; Sharp, Susan W; Ostlie, Daniel J; Holcomb, George W; St Peter, Shawn D

2008-12-01

Nonoperative management is standard treatment of blunt liver or spleen injuries. However, there are few reports outlining the natural history and outcomes of severe blunt hepatic and splenic trauma. Therefore, we reviewed our experience with nonoperative management of grade 4 or 5 liver and spleen injuries. A retrospective analysis was performed on patients with grade 4 or 5 (high-grade) blunt liver and/or spleen injuries from April 1997 to July 2007 at our children's hospital. Demographics, hospital course data, and follow-up data were analyzed. There were 74 high-grade injuries in 72 patients. There were 30 high-grade liver and 44 high-grade spleen injuries. Two patients had both a liver and splenic injury. High-grade liver injuries had a significantly longer length of intensive care and hospital stay compared to high-grade spleen injuries. There were also a significantly higher number of transfusions, radiographs, and total charges in the high-grade liver injuries when compared to the high-grade splenic injuries. The only mortality from solid organ injury was a grade 4 liver injury with portal vein disruption. In contrast, there was only one complication from a high-grade splenic injury-a pleural effusion treated with thoracentesis. There were 5 patients with complications from their liver injury requiring 18 therapeutic procedures. Three patients (10%) with liver injury required readmission as follows: one 5 times, one 3 times, and another one time. Patients with high-grade liver injuries have a longer recovery, more complications, and greater use of resources than in patients with similar injuries to the spleen.

[Treatment of acute colonic pseudo-obstruction (Ogilvie's Syndrome). Systematic review].

PubMed

Ben Ameur, Hazem; Boujelbene, Salah; Beyrouti, Mohamed Issam

2013-10-01

Ogilvie's syndrome is acute colonic dilatation without organic obstacle in a previously healthy colon. Surgery is the only treatment of cases complicated by necrosis or perforation. In contrast, treatment of uncomplicated forms is not unanimous, and is the subject of this literature review. Determine the results of different therapeutic methods of uncomplicated forms of Ogilvie's syndrome in terms of efficiency of removal of colonic distension, recurrence, morbidity and mortality. Clarify their respective indications. An electronic literature search in the "MEDLINE" database, supplemented by hand searching on the reference lists of articles, was conducted for the period between 1980 and 2012. Conservative treatment is effective in 53 to 96% of cases with a risk of colonic perforation less than 2.5% and a mortality of 0 to 14% % (level of evidence 4, recommendation grade C). Neostigmine is effective in 64 to 91% of cases after a first dose, with a risk of recurrence of 0 to 38%. It remains effective in 40 to 100% of cases after a second dose (evidence level 2, grade recommendation B). Endoscopic decompression is a safe and effective technique with a success rate of 61 to 100% at the first attempt , a recurrence rate of 0 to 50%, a rate of colonic perforation less than 5% and a mortality less than 5% (level evidence 4, recommendation grade C). PEG may be recommended for the prevention of recurrence of the ACPO after successful treatment with neostigmine or endoscopic decompression (evidence level 2, recommendation grade B). The cecostomy is more effective and safer than conventional colostomy (level of evidence 4, recommendation grade C). The cecostomy is highly effective in colonic decompression but associated with a high mortality (level of evidence 4, recommendation grade C). Conservative treatment is recommended in first intention. In case of failure, neostigmine should be tried. If unsuccessful, the endoscopic decompression is proposed. The cecostomy is indicated as a last resort after failure of endoscopic decompression.

Gadoxetate Disodium-Enhanced MRI to Differentiate Dysplastic Nodules and Grade of Hepatocellular Carcinoma: Correlation With Histopathology.

PubMed

Channual, Stephanie; Tan, Nelly; Siripongsakun, Surachate; Lassman, Charles; Lu, David S; Raman, Steven S

2015-09-01

The objective of our study was to determine quantitative differences to differentiate low-grade from high-grade dysplastic nodules (DNs) and low-grade from high-grade hepatocellular carcinomas (HCCs) using gadoxetate disodium-enhanced MRI. A retrospective study of 149 hepatic nodules in 127 consecutive patients who underwent gadoxetic acid-enhanced MRI was performed. MRI signal intensities (SIs) of the representative lesion ROI and of ROIs in liver parenchyma adjacent to the lesion were measured on unenhanced T1-weighted imaging and on dynamic contrast-enhanced MRI in the arterial, portal venous, delayed, and hepatobiliary phases. The relative SI of the lesion was calculated for each phase as the relative intensity ratio as follows: [mass SI / liver SI]. Of the 149 liver lesions, nine (6.0%) were low-grade DNs, 21 (14.1%) were high-grade DNs, 83 (55.7%) were low-grade HCCs, and 36 (24.2%) were high-grade HCCs. The optimal cutoffs for differentiating low-grade DNs from high-grade DNs and HCCs were an unenhanced to arterial SI of ≥ 0 or a relative SI on T2-weighted imaging of ≤ 1.5, with a positive predictive value (PPV) of 99.2% and accuracy of 88.6%. The optimal cutoffs for differentiating low-grade HCCs from high-grade HCCs were a relative hepatobiliary SI of ≤ 0.5 or a relative T2 SI of ≥ 1.5, with a PPV of 81.0% and an accuracy of 60.5%. Gadoxetate disodium-enhanced MRI allows quantitative differentiation of low-grade DNs from high-grade DNs and HCCs, but significant overlap was seen between low-grade HCCs and high-grade HCCs.

An adaptive corridor-wide signal timing optimization methodology for traffic network with multiple highway-rail grade crossings.

DOT National Transportation Integrated Search

2016-06-01

Highway-rail grade crossings (HRGCs) and the intersections in their proximity are areas where potential problems in terms of safety and efficiency often arise if only simple or outdated treatments, such as normal signal timing or passive railroad war...

CH3 NH3 PbI3 and HC(NH2 )2 PbI3 Powders Synthesized from Low-Grade PbI2 : Single Precursor for High-Efficiency Perovskite Solar Cells.

PubMed

Zhang, Yong; Kim, Seul-Gi; Lee, Do-Kyoung; Park, Nam-Gyu

2018-05-09

High-efficiency perovskite solar cells are generally fabricated by using highly pure (>99.99 %) PbI 2 mixed with an organic iodide in polar aprotic solvents. However, the use of such an expensive chemical may impede progress toward large-scale industrial applications. Here, we report on the synthesis of perovskite powders by using inexpensive low-grade (99 %) PbI 2 and on the photovoltaic performance of perovskite solar cells prepared from a powder-based single precursor. Pure APbI 3 [A=methylammonium (MA) or formamidinium (FA)] perovskite powders were synthesized by treating low-grade PbI 2 with MAI or FAI in acetonitrile at ambient temperature. The structural phase purity was confirmed by X-ray diffraction. The solar cell with a MAPbI 3 film prepared from the synthesized perovskite powder demonstrated a power conversion efficiency (PCE) of 17.14 %, which is higher than the PCE of MAPbI 3 films prepared by using both MAI and PbI 2 as precursors (PCE=13.09 % for 99 % pure PbI 2 and PCE=16.39 % for 99.9985 % pure PbI 2 ). The synthesized powder showed better absorption and photoluminescence, which were responsible for the better photovoltaic performance. For the FAPbI 3 powder, a solution with a yellow non-perovskite δ-FAPbI 3 powder synthesized at room temperature was found to lead to a black perovskite film, whereas a solution with the black perovskite α-FAPbI 3 powder synthesized at 150 °C was not transformed into a black perovskite film. The α↔δ transition between the powder and film was assumed to correlate with the difference in the iodoplumbates in the powder-dissolved solution. An average PCE of 17.21 % along with a smaller hysteresis [ΔPCE=PCE reverse -PCE forward )=1.53 %] was demonstrated from the perovskite solar cell prepared by using δ-FAPbI 3 powder; this PCE is higher than the average PCE of 17.05 % with a larger hysteresis (ΔPCE=2.71 %) for a device based on a conventional precursor solution dissolving MAI with high-purity PbI 2 . The smaller hysteresis was indicative of fewer defects in the resulting FAPbI 3 film prepared by using the δ-FAPbI 3 powder. © 2018 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim.

A Thermally-Regenerative Ammonia-Based Flow Battery for Electrical Energy Recovery from Waste Heat.

PubMed

Zhu, Xiuping; Rahimi, Mohammad; Gorski, Christopher A; Logan, Bruce

2016-04-21

Large amounts of low-grade waste heat (temperatures <130 °C) are released during many industrial, geothermal, and solar-based processes. Using thermally-regenerative ammonia solutions, low-grade thermal energy can be converted to electricity in battery systems. To improve reactor efficiency, a compact, ammonia-based flow battery (AFB) was developed and tested at different solution concentrations, flow rates, cell pairs, and circuit connections. The AFB achieved a maximum power density of 45 W m(-2) (15 kW m(-3) ) and an energy density of 1260 Wh manolyte (-3) , with a thermal energy efficiency of 0.7 % (5 % relative to the Carnot efficiency). The power and energy densities of the AFB were greater than those previously reported for thermoelectrochemical and salinity-gradient technologies, and the voltage or current could be increased using stacked cells. These results demonstrated that an ammonia-based flow battery is a promising technology to convert low-grade thermal energy to electricity. © 2016 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Estimating the circuit delay of FPGA with a transfer learning method

NASA Astrophysics Data System (ADS)

Cui, Xiuhai; Liu, Datong; Peng, Yu; Peng, Xiyuan

2017-10-01

With the increase of FPGA (Field Programmable Gate Array, FPGA) functionality, FPGA has become an on-chip system platform. Due to increase the complexity of FPGA, estimating the delay of FPGA is a very challenge work. To solve the problems, we propose a transfer learning estimation delay (TLED) method to simplify the delay estimation of different speed grade FPGA. In fact, the same style different speed grade FPGA comes from the same process and layout. The delay has some correlation among different speed grade FPGA. Therefore, one kind of speed grade FPGA is chosen as a basic training sample in this paper. Other training samples of different speed grade can get from the basic training samples through of transfer learning. At the same time, we also select a few target FPGA samples as training samples. A general predictive model is trained by these samples. Thus one kind of estimation model is used to estimate different speed grade FPGA circuit delay. The framework of TRED includes three phases: 1) Building a basic circuit delay library which includes multipliers, adders, shifters, and so on. These circuits are used to train and build the predictive model. 2) By contrasting experiments among different algorithms, the forest random algorithm is selected to train predictive model. 3) The target circuit delay is predicted by the predictive model. The Artix-7, Kintex-7, and Virtex-7 are selected to do experiments. Each of them includes -1, -2, -2l, and -3 different speed grade. The experiments show the delay estimation accuracy score is more than 92% with the TLED method. This result shows that the TLED method is a feasible delay assessment method, especially in the high-level synthesis stage of FPGA tool, which is an efficient and effective delay assessment method.

Screening Magnetic Resonance Imaging-Based Prediction Model for Assessing Immediate Therapeutic Response to Magnetic Resonance Imaging-Guided High-Intensity Focused Ultrasound Ablation of Uterine Fibroids.

PubMed

Kim, Young-sun; Lim, Hyo Keun; Park, Min Jung; Rhim, Hyunchul; Jung, Sin-Ho; Sohn, Insuk; Kim, Tae-Joong; Keserci, Bilgin

2016-01-01

The aim of this study was to fit and validate screening magnetic resonance imaging (MRI)-based prediction models for assessing immediate therapeutic responses of uterine fibroids to MRI-guided high-intensity focused ultrasound (MR-HIFU) ablation. Informed consent from all subjects was obtained for our institutional review board-approved study. A total of 240 symptomatic uterine fibroids (mean diameter, 6.9 cm) in 152 women (mean age, 43.3 years) treated with MR-HIFU ablation were retrospectively analyzed (160 fibroids for training, 80 fibroids for validation). Screening MRI parameters (subcutaneous fat thickness [mm], x1; relative peak enhancement [%] in semiquantitative perfusion MRI, x2; T2 signal intensity ratio of fibroid to skeletal muscle, x3) were used to fit prediction models with regard to ablation efficiency (nonperfused volume/treatment cell volume, y1) and ablation quality (grade 1-5, poor to excellent, y2), respectively, using the generalized estimating equation method. Cutoff values for achievement of treatment intent (efficiency >1.0; quality grade 4/5) were determined based on receiver operating characteristic curve analysis. Prediction performances were validated by calculating positive and negative predictive values. Generalized estimating equation analyses yielded models of y1 = 2.2637 - 0.0415x1 - 0.0011x2 - 0.0772x3 and y2 = 6.8148 - 0.1070x1 - 0.0050x2 - 0.2163x3. Cutoff values were 1.312 for ablation efficiency (area under the curve, 0.7236; sensitivity, 0.6882; specificity, 0.6866) and 4.019 for ablation quality (0.8794; 0.7156; 0.9020). Positive and negative predictive values were 0.917 and 0.500 for ablation efficiency and 0.978 and 0.600 for ablation quality, respectively. Screening MRI-based prediction models for assessing immediate therapeutic responses of uterine fibroids to MR-HIFU ablation were fitted and validated, which may reduce the risk of unsuccessful treatment.

Birinapant and Carboplatin in Treating Patients With Recurrent High Grade Ovarian, Fallopian Tube, or Primary Peritoneal Cancer

ClinicalTrials.gov

2018-04-26

High Grade Fallopian Tube Serous Adenocarcinoma; High Grade Ovarian Serous Adenocarcinoma; Primary Peritoneal High Grade Serous Adenocarcinoma; Recurrent Fallopian Tube Carcinoma; Recurrent Ovarian Carcinoma; Recurrent Primary Peritoneal Carcinoma

Precise Perforation and Scalable Production of Si Particles from Low-Grade Sources for High-Performance Lithium Ion Battery Anodes.

PubMed

Zong, Linqi; Jin, Yan; Liu, Chang; Zhu, Bin; Hu, Xiaozhen; Lu, Zhenda; Zhu, Jia

2016-11-09

Alloy anodes, particularly silicon, have been intensively pursued as one of the most promising anode materials for the next generation lithium-ion battery primarily because of high specific capacity (>4000 mAh/g) and elemental abundance. In the past decade, various nanostructures with porosity or void space designs have been demonstrated to be effective to accommodate large volume expansion (∼300%) and to provide stable solid electrolyte interphase (SEI) during electrochemical cycling. However, how to produce these building blocks with precise morphology control at large scale and low cost remains a challenge. In addition, most of nanostructured silicon suffers from poor Coulombic efficiency due to a large surface area and Li ion trapping at the surface coating. Here we demonstrate a unique nanoperforation process, combining modified ball milling, annealing, and acid treating, to produce porous Si with precise and continuous porosity control (from 17% to 70%), directly from low cost metallurgical silicon source (99% purity, ∼ $1/kg). The produced porous Si coated with graphene by simple ball milling can deliver a reversible specific capacity of 1250 mAh/g over 1000 cycles at the rate of 1C, with Coulombic efficiency of first cycle over 89.5%. The porous networks also provide efficient ion and electron pathways and therefore enable excellent rate performance of 880 mAh/g at the rate of 5C. Being able to produce particles with precise porosity control through scalable processes from low-grade materials, it is expected that this nanoperforation may play a role in the next generation lithium ion battery anodes, as well as many other potential applications such as optoelectronics and thermoelectrics.

Diesels in combined cycle

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kuehn, S.E.

1995-03-01

This article examines why the diesel engine is a very attractive choice for producing power in the combined-cycle configuration. The medium-speed diesel is already one of the most efficient simple cycle sources of electricity, especially with lower grade fuels. Large units have heat-rate efficiencies as high as 45%, equating to a heat rate of 7,580 Btu/k Whr, and no other power production prime mover can match this efficiency. Diesels also offer designers fuel flexibility and can burn an extreme variety of fuels without sacrificing many of its positive operating attributes. Diesels are the first building block in a highly efficientmore » combined cycle system that relies on the hot gas and oxygen in the diesel`s exhaust to combust either natural gas, light distillate oil, heavy oil or coal, in a boiler. By using a fired boiler, steam can be generated at sufficient temperature and pressure to operate a Rankine steam cycle efficiently. Diesel combined-cycle plants can be configured in much the same way a gas turbine plant would be. However, the diesel combined-cycle scheme requires supplemental firing to generate appropriate steam conditions. The most efficient cycle, therefore, would not be achieved until combustion air and supplemental fuel are minimized to levels that satisfy steam conditions, steam generation and power generation constraints.« less

Semi-industrial experimental study on bauxite separation using a cell-column integration process

NASA Astrophysics Data System (ADS)

Zhang, Ning-ning; Zhou, Chang-chun; Cong, Long-fei; Cao, Wen-long; Zhou, You

2016-01-01

The cyclonic-static micro-bubble flotation column (FCSMC) is a highly efficient mineral processing equipment. In this study, a cell-column (FCSMC) integration process was investigated for the separation of bauxite and its feasibility was analyzed on a theoretical basis. The properties of low-grade bauxite ore from Henan Province, China were analyzed. Parameters such as reagent dosage, scraping bubble time, and pressure of the circulating pump during the sorting process were investigated and optimized to improve the flotation efficiency. On the basis of these parameters, continuous separation experiments were conducted. Bauxite concentrate with an aluminum-to-silicon (A/S) mass ratio of 6.37 and a 77.63wt% recovery rate were achieved via a flow sheet consisting of "fast flotation using a flotation cell, one roughing flotation and one cleaning flotation using flotation columns". Compared with the full-flotation-cells process, the cell-column integration process resulted in an increase of the A/S ratio by 0.41 and the recovery rate by 17.58wt%. Cell-column integration separation technology represents a new approach for the separation of middle-to-low-grade bauxite ore.

Redox conditions and the efficiency of chlorinated ethene biodegradation: Field studies

USGS Publications Warehouse

Chapelle, F.H.; Bradley, P.M.

2000-01-01

The effect of redox conditions on the efficiency of chlorinated ethene biodegradation was investigated at two field sites. One site (NAS Cecil Field, FL) is characterized by predominantly Fe(III)-reducing conditions in the contaminant source area, grading to predominantly sulfate- reducing conditions downgradient. This sequence of redox conditions led to relatively inefficient biodegradation of chlorinated ethenes, with high concentrations of trichloroethene extending more than 400 meters downgradient of the source area. In contrast, a second site (NBS Kings Bay, GA) characterized by predominantly sulfate-reducing conditions in the source area followed by Fe(III)-reducing conditions downgradient. In this system perchloroethene (PCE) and TCE were rapidly biodegraded and extended less than 100 meters downgradient. Rates of ground- water transport are similar at the two sites (???0.2 m/d) indicating that the succession of redox processes, rather than other hydrologic factors, is the principal control on biodegradation. In particular, redox conditions that favor the initial reduction of highly chlorinated ethenes (methanogenic or sulfate-reducing conditions) followed by more oxidizing conditions (Fe(III)- reducing or oxic conditions) favors efficient biodegradation. Thus, documenting the succession of redox processes is an important step in understanding the efficiency of chlorinated ethene biodegradation in ground-water systems.

Clinical-Grade Manufacturing of Therapeutic Human Mesenchymal Stem/Stromal Cells in Microcarrier-Based Culture Systems.

PubMed

Fernandes-Platzgummer, Ana; Carmelo, Joana G; da Silva, Cláudia Lobato; Cabral, Joaquim M S

2016-01-01

The therapeutic potential of mesenchymal stem/stromal cells (MSC) has triggered the need for high cell doses in a vast number of clinical applications. This demand requires the development of good manufacturing practices (GMP)-compliant ex vivo expansion protocols that should be effective to deliver a robust and reproducible supply of clinical-grade cells in a safe and cost-effective manner. Controlled stirred-tank bioreactor systems under xenogeneic (xeno)-free culture conditions offer ideal settings to develop and optimize cell manufacturing to meet the standards and needs of human MSC for cellular therapies. Herein we describe two microcarrier-based stirred culture systems using spinner flasks and controlled stirred-tank bioreactors under xeno-free conditions for the efficient ex vivo expansion of human bone marrow and adipose tissue-derived MSC.

[Impact of dissemination of a diet and physical activity pamphlet to 8th grade students in France].

PubMed

Mathiot, Hélène; Nugier, Angélique; Nguyen-Thanh, Viêt

"J'aime manger, j'aime bouger, le guide nutrition pour les adolescents", ("I love to eat and move, the nutrition pamphlet for teenagers"), which is one of the eight information guides of the French Nutritional and Health Programme, is distributed annually by Santé publique France, the national public health agency, to 8th grade students by their biology teachers. The aim of this study was to assess the impact of this dissemination plan and the way 8th grade students and biology teachers perceive the pamphlet. Teenagers' knowledge of the French Nutritional and Health Programme's recommendations was also assessed. This study was based on a mixed method and was conducted in 2015 on 432 8th grade students by face-to-face interviews at home and 20 8th grade biology teachers interviewed individually or during focus groups. The pamphlet obtained a recognition score of 40% among young people, who mostly saw it during a course at high school. 30% of teenagers reported having read or only skimmed through it and more than three-quarters reported that they liked the pamphlet. Teenagers and teachers found the pamphlet clear and accessible and globally appreciated the content, but they considered that it could be modernized. Systematic distribution of the guide to students of a specific school grade is an efficient strategy to reach a maximum number of young people. It should be continued in the future. Modernization of the guide and improved support to teachers to distribute the guide could improve the performance of the programme.

Ennoblement, corrosion, and biofouling in brackish seawater: Comparison between six stainless steel grades.

PubMed

Huttunen-Saarivirta, E; Rajala, P; Marja-Aho, M; Maukonen, J; Sohlberg, E; Carpén, L

2018-04-01

In this work, six common stainless steel grades were compared with respect to ennoblement characteristics, corrosion performance and tendency to biofouling in brackish sea water in a pilot-scale cooling water circuit. Two tests were performed, each employing three test materials, until differences between the materials were detected. Open circuit potential (OCP) was measured continuously in situ. Potentiodynamic polarization and electrochemical impedance spectroscopy (EIS) measurements were conducted before and after the tests. Exposed specimens were further subjected to examinations by scanning electron microscopy (SEM) and energy-dispersive spectroscopy (EDS), and the biofouling was studied using epifluorescence microscopy, quantitative polymerase chain reaction (qPCR) and high-throughput sequencing (HTP sequencing). The results revealed dissimilarities between the stainless steel grades in corrosion behaviour and biofouling tendency. The test material that differed from the most of the other studied alloys was grade EN 1.4162. It experienced fastest and most efficient ennoblement of OCP, its passive area shrank to the greatest extent and the cathodic reaction was accelerated to a significant degree by the development of biofilm. Furthermore, microbiological analyses revealed that bacterial community on EN 1.4162 was dominated by Actinobacteria, whereas on the other five test materials Proteobacteria was the main bacterial phylum. Copyright © 2017 Elsevier B.V. All rights reserved.

Place of Arterial Embolization in Severe Blunt Hepatic Trauma: A Multidisciplinary Approach

DOE Office of Scientific and Technical Information (OSTI.GOV)

Monnin, Valerie, E-mail: val_monnin@yahoo.fr; Sengel, Christian; Thony, Frederic

2008-09-15

This study evaluates the efficacy of arterial embolization (AE) for blunt hepatic traumas (BHT) as part of a combined management strategy based on the hemodynamic status of patients and CT findings. From 2000 to 2005, 84 patients were admitted to our hospital for BHT. Of these, 14 patients who had high-grade injuries (grade III [n = 2], grade IV [n = 9], grade V [n = 3]) underwent AE because of arterial bleeding and were included in the study. They were classified into three groups according to their hemodynamic status: (1) unresponsive shock, (2) shock improved with resuscitation, and (3)more » hemodynamic stability. Four patients (group 1) underwent, first, laparotomy with packing and, then, AE for persistent bleeding. Ten patients who were hemodynamically stable (group 1) or even unstable (group 2) underwent AE first, based on CT findings. AE was successful in all cases. The mortality rate was 7% (1/14). Only two angiography-related complications (gallbladder infarction) were reported. Liver-related complications (abdominal compartment syndrome and biliary complications) were frequent and often required secondary interventions. Our multidisciplinary approach for the management of BHT gives a main role to embolization, even for hemodynamically unstable patients. In this strategy AE is very efficient and has a low complication rate.« less

A portable detection instrument based on DSP for beef marbling

NASA Astrophysics Data System (ADS)

Zhou, Tong; Peng, Yankun

2014-05-01

Beef marbling is one of the most important indices to assess beef quality. Beef marbling is graded by the measurement of the fat distribution density in the rib-eye region. However quality grades of beef in most of the beef slaughtering houses and businesses depend on trainees using their visual senses or comparing the beef slice to the Chinese standard sample cards. Manual grading demands not only great labor but it also lacks objectivity and accuracy. Aiming at the necessity of beef slaughtering houses and businesses, a beef marbling detection instrument was designed. The instrument employs Charge-coupled Device (CCD) imaging techniques, digital image processing, Digital Signal Processor (DSP) control and processing techniques and Liquid Crystal Display (LCD) screen display techniques. The TMS320DM642 digital signal processor of Texas Instruments (TI) is the core that combines high-speed data processing capabilities and real-time processing features. All processes such as image acquisition, data transmission, image processing algorithms and display were implemented on this instrument for a quick, efficient, and non-invasive detection of beef marbling. Structure of the system, working principle, hardware and software are introduced in detail. The device is compact and easy to transport. The instrument can determine the grade of beef marbling reliably and correctly.

Laser driven nuclear science and applications: The need of high efficiency, high power and high repetition rate Laser beams

NASA Astrophysics Data System (ADS)

Gales, S.

2015-10-01

Extreme Light Infrastructure (ELI) is a pan European research initiative selected on the European Strategy Forum on Research Infrastructures Roadmap that aims to close the gap between the existing laboratory-based laser driven research and international facility-grade research centre. The ELI-NP facility, one of the three ELI pillars under construction, placed in Romania and to be operational in 2018, has as core elements a couple of new generation 10 PW laser systems and a narrow bandwidth Compton backscattering gamma source with photon energies up to 19 MeV. ELI-NP will address nuclear photonics, nuclear astrophysics and quantum electrodynamics involving extreme photon fields. Prospective applications of high power laser in nuclear astrophysics, accelerator physics, in particular towards future Accelerator Driven System, as well as in nuclear photonics, for detection and characterization of nuclear material, and for nuclear medicine, will be discussed. Key issues in these research areas will be at reach with significant increase of the repetition rates and of the efficiency at the plug of the high power laser systems as proposed by the ICAN collaboration.

Thermo-Magneto-Electric Generator Arrays for Active Heat Recovery System

PubMed Central

Chun, Jinsung; Song, Hyun-Cheol; Kang, Min-Gyu; Kang, Han Byul; Kishore, Ravi Anant; Priya, Shashank

2017-01-01

Continued emphasis on development of thermal cooling systems is being placed that can cycle low grade heat. Examples include solar powered unmanned aerial vehicles (UAVs) and data storage servers. The power efficiency of solar module degrades at elevated temperature, thereby, necessitating the need for heat extraction system. Similarly, data centres in wireless computing system are facing increasing efficiency challenges due to high power consumption associated with managing the waste heat. We provide breakthrough in addressing these problems by developing thermo-magneto-electric generator (TMEG) arrays, composed of soft magnet and piezoelectric polyvinylidene difluoride (PVDF) cantilever. TMEG can serve dual role of extracting the waste heat and converting it into useable electricity. Near room temperature second-order magnetic phase transition in soft magnetic material, gadolinium, was employed to obtain mechanical vibrations on the PVDF cantilever under small thermal gradient. TMEGs were shown to achieve high vibration frequency at small temperature gradients, thereby, demonstrating effective heat transfer. PMID:28145516

Photon counting microstrip X-ray detectors with GaAs sensors

NASA Astrophysics Data System (ADS)

Ruat, M.; Andrä, M.; Bergamaschi, A.; Barten, R.; Brückner, M.; Dinapoli, R.; Fröjdh, E.; Greiffenberg, D.; Lopez-Cuenca, C.; Lozinskaya, A. D.; Mezza, D.; Mozzanica, A.; Novikov, V. A.; Ramilli, M.; Redford, S.; Ruder, C.; Schmitt, B.; Shi, X.; Thattil, D.; Tinti, G.; Tolbanov, O. P.; Tyazhev, A.; Vetter, S.; Zarubin, A. N.; Zhang, J.

2018-01-01

High-Z sensors are increasingly used to overcome the poor efficiency of Si sensors above 15 keV, and further extend the energy range of synchrotron and FEL experiments. Detector-grade GaAs sensors of 500 μm thickness offer 98% absorption efficiency at 30 keV and 50% at 50 keV . In this work we assess the usability of GaAs sensors in combination with the MYTHEN photon-counting microstrip readout chip developed at PSI. Different strip length and pitch are compared, and the detector performance is evaluated in regard of the sensor material properties. Despite increased leakage current and noise, photon-counting strips mounted with GaAs sensors can be used with photons of energy as low as 5 keV, and exhibit excellent linearity with energy. The charge sharing is doubled as compared to silicon strips, due to the high diffusion coefficient of electrons in GaAs.

Thermo-Magneto-Electric Generator Arrays for Active Heat Recovery System.

PubMed

Chun, Jinsung; Song, Hyun-Cheol; Kang, Min-Gyu; Kang, Han Byul; Kishore, Ravi Anant; Priya, Shashank

2017-02-01

Continued emphasis on development of thermal cooling systems is being placed that can cycle low grade heat. Examples include solar powered unmanned aerial vehicles (UAVs) and data storage servers. The power efficiency of solar module degrades at elevated temperature, thereby, necessitating the need for heat extraction system. Similarly, data centres in wireless computing system are facing increasing efficiency challenges due to high power consumption associated with managing the waste heat. We provide breakthrough in addressing these problems by developing thermo-magneto-electric generator (TMEG) arrays, composed of soft magnet and piezoelectric polyvinylidene difluoride (PVDF) cantilever. TMEG can serve dual role of extracting the waste heat and converting it into useable electricity. Near room temperature second-order magnetic phase transition in soft magnetic material, gadolinium, was employed to obtain mechanical vibrations on the PVDF cantilever under small thermal gradient. TMEGs were shown to achieve high vibration frequency at small temperature gradients, thereby, demonstrating effective heat transfer.

MRI differentiation of low-grade from high-grade appendicular chondrosarcoma.

PubMed

Douis, Hassan; Singh, Leanne; Saifuddin, Asif

2014-01-01

To identify magnetic resonance imaging (MRI) features which differentiate low-grade chondral lesions (atypical cartilaginous tumours/grade 1 chondrosarcoma) from high-grade chondrosarcomas (grade 2, grade 3 and dedifferentiated chondrosarcoma) of the major long bones. We identified all patients treated for central atypical cartilaginous tumours and central chondrosarcoma of major long bones (humerus, femur, tibia) over a 13-year period. The MRI studies were assessed for the following features: bone marrow oedema, soft tissue oedema, bone expansion, cortical thickening, cortical destruction, active periostitis, soft tissue mass and tumour length. The MRI-features were compared with the histopathological tumour grading using univariate, multivariate logistic regression and receiver operating characteristic curve (ROC) analyses. One hundred and seventy-nine tumours were included in this retrospective study. There were 28 atypical cartilaginous tumours, 79 grade 1 chondrosarcomas, 36 grade 2 chondrosarcomas, 13 grade 3 chondrosarcomas and 23 dedifferentiated chondrosarcomas. Multivariate analysis demonstrated that bone expansion (P = 0.001), active periostitis (P = 0.001), soft tissue mass (P < 0.001) and tumour length (P < 0.001) were statistically significant differentiating factors between low-grade and high-grade chondral lesions with an area under the ROC curve of 0.956. On MRI, bone expansion, active periostitis, soft tissue mass and tumour length can reliably differentiate high-grade chondrosarcomas from low-grade chondral lesions of the major long bones. • Accurate differentiation of low-grade from high-grade chondrosarcomas is essential before surgery • MRI can reliably differentiate high-grade from low-grade chondrosarcomas of long bone • Differentiating features are bone expansion, periostitis, soft tissue mass and tumour length • Presence of these four MRI features demonstrated a diagnostic accuracy (AUC) of 95.6 % • The findings may result in more accurate diagnosis before definitive surgery.

DOE Zero Energy Ready Home Case Study: John Hubert Associates — EXIT-0 House, North Cape May, NJ

DOE Office of Scientific and Technical Information (OSTI.GOV)

none,

This house is the first DOE Zero Energy Ready Home for this builder and won a Custom Builder award in the 2014 Housing Innovation Awards. The 1,871-ft2 home features advanced-framed above-grade walls with R-21 fiberglass batt plus an R-3.6-insulated coated OSB sheathing, R-18 rigid-foam-insulated crawlspace walls, solar water heating, a high-efficiency heat pump, an HRV, and mostly LED lighting.

The Everyday Consumer. An Interdisciplinary Approach to Consumer Education. Developed for Grades 9-12.

ERIC Educational Resources Information Center

Allegheny Intermediate Unit, Pittsburgh, PA.

This manual contains activities and resources for infusing consumer education into English, business, mathematics, social studies, science, and home economics courses in grades nine through 12. The activities are intended to help students become more knowledgeable and efficient in managing their personal and collective economic affairs. The…

Test-Enhanced Learning in Third-Grade Children

ERIC Educational Resources Information Center

Jaeger, Antonio; Eisenkraemer, Raquel Eloísa; Stein, Lilian Milnitsky

2015-01-01

Several recent studies have shown that retrieval is more efficient than restudy in enhancing the long-term retention of memories. However, studies investigating this effect in children are still rare. Here, we report an experiment in which third-grade children initially read a brief encyclopaedic text twice and then either performed a cued recall…

Decision support system for the detection and grading of hard exudates from color fundus photographs

NASA Astrophysics Data System (ADS)

Jaafar, Hussain F.; Nandi, Asoke K.; Al-Nuaimy, Waleed

2011-11-01

Diabetic retinopathy is a major cause of blindness, and its earliest signs include damage to the blood vessels and the formation of lesions in the retina. Automated detection and grading of hard exudates from the color fundus image is a critical step in the automated screening system for diabetic retinopathy. We propose novel methods for the detection and grading of hard exudates and the main retinal structures. For exudate detection, a novel approach based on coarse-to-fine strategy and a new image-splitting method are proposed with overall sensitivity of 93.2% and positive predictive value of 83.7% at the pixel level. The average sensitivity of the blood vessel detection is 85%, and the success rate of fovea localization is 100%. For exudate grading, a polar fovea coordinate system is adopted in accordance with medical criteria. Because of its competitive performance and ability to deal efficiently with images of variable quality, the proposed technique offers promising and efficient performance as part of an automated screening system for diabetic retinopathy.

High luminance monochrome vs. color displays: impact on performance and search

NASA Astrophysics Data System (ADS)

Krupinski, Elizabeth A.; Roehrig, Hans; Matsui, Takashi

2011-03-01

To determine if diagnostic accuracy and visual search efficiency with a high luminance medical-grade color display are equivalent to a high luminance medical-grade monochrome display. Six radiologists viewed DR chest images, half with a solitary pulmonary nodule and half without. Observers reported whether or not a nodule was present and their confidence in that decision. Total viewing time per image was recorded. On a subset of 15 cases eye-position was recorded. Confidence data were analyzed using MRMC ROC techniques. There was no statistically significant difference (F = 0.0136, p = 0.9078) between color (mean Az = 0.8981, se = 0.0065) and monochrome (mean Az = 0.8945, se = 0.0148) diagnostic performance. Total viewing time per image did not differ significantly (F = 0.392, p = 0.5315) as a function of color (mean = 27.36 sec, sd = 12.95) vs monochrome (mean = 28.04, sd = 14.36) display. There were no significant differences in decision dwell times (true and false, positive and negative) overall for color vs monochrome displays (F = 0.133, p = 0.7154). The true positive (TP) and false positive (FP) decisions were associated with the longest dwell times, the false negatives (FN) with slightly shorter dwell times, and the true negative decisions (TN) with the shortest (F = 50.552, p < 0.0001) and these trends were consistent for both color and monochrome displays. Current color medical-grade displays are suitable for primary diagnostic interpretation in clinical radiology.

Differentiation of low- and high-grade clear cell renal cell carcinoma: Tumor size versus CT perfusion parameters.

PubMed

Chen, Chao; Kang, Qinqin; Xu, Bing; Guo, Hairuo; Wei, Qiang; Wang, Tiegong; Ye, Hui; Wu, Xinhuai

To compare the utility of tumor size and CT perfusion parameters for differentiation of low- and high-grade clear cell renal cell carcinoma (RCC). Tumor size, Equivalent blood volume (Equiv BV), permeability surface-area product (PS), blood flow (BF), and Fuhrman pathological grading of clear cell RCC were retrospectively analyzed. High-grade clear cell RCC had significantly higher tumor size and lower PS than low grade. Tumor size positively correlated with Fuhrman grade, but PS negatively did. Tumor size and PS were significantly independent indexes for differentiating high-grade from low-grade clear cell RCC. Copyright © 2017 Elsevier Inc. All rights reserved.

Building a Six-Junction Inverted Metamorphic Concentrator Solar Cell

DOE PAGES

Geisz, John F.; Steiner, Myles A.; Jain, Nikhil; ...

2017-12-20

We propose practical six-junction (6J) inverted metamorphic multijunction (IMM) concentrator solar cell designs with the potential to exceed 50% efficiency using moderately high quality junction materials. We demonstrate the top three junctions and their monolithic integration lattice matched to GaAs using 2.1-eV AlGaInP, 1.7-eV AlGaAs or GaInAsP, and 1.4-eV GaAs with external radiative efficiencies >0.1%. We demonstrate tunnel junctions with peak tunneling current >400 A/cm 2 that are transparent to <2.1-eV light. We compare the bottom three GaInAs(p) junctions with bandgaps of 1.2, 1.0, and 0.7 eV grown on InP and transparent metamorphic grades with low dislocation densities. The solutionmore » to an integration challenge resulting from Zn diffusion in the GaAs junction is illustrated in a five-junction IMM. Excellent 1-sun performance is demonstrated in a complete 6J IMM device with VOC = 5.15 V, and a promising pathway toward >50% efficiency at high concentrations is presented.« less

Building a Six-Junction Inverted Metamorphic Concentrator Solar Cell

DOE Office of Scientific and Technical Information (OSTI.GOV)

Geisz, John F.; Steiner, Myles A.; Jain, Nikhil

We propose practical six-junction (6J) inverted metamorphic multijunction (IMM) concentrator solar cell designs with the potential to exceed 50% efficiency using moderately high quality junction materials. We demonstrate the top three junctions and their monolithic integration lattice matched to GaAs using 2.1-eV AlGaInP, 1.7-eV AlGaAs or GaInAsP, and 1.4-eV GaAs with external radiative efficiencies >0.1%. We demonstrate tunnel junctions with peak tunneling current >400 A/cm 2 that are transparent to <2.1-eV light. We compare the bottom three GaInAs(p) junctions with bandgaps of 1.2, 1.0, and 0.7 eV grown on InP and transparent metamorphic grades with low dislocation densities. The solutionmore » to an integration challenge resulting from Zn diffusion in the GaAs junction is illustrated in a five-junction IMM. Excellent 1-sun performance is demonstrated in a complete 6J IMM device with VOC = 5.15 V, and a promising pathway toward >50% efficiency at high concentrations is presented.« less

The role of fluid intelligence and learning in analogical reasoning: How to become neurally efficient?

PubMed

Dix, Annika; Wartenburger, Isabell; van der Meer, Elke

2016-10-01

This study on analogical reasoning evaluates the impact of fluid intelligence on adaptive changes in neural efficiency over the course of an experiment and specifies the underlying cognitive processes. Grade 10 students (N=80) solved unfamiliar geometric analogy tasks of varying difficulty. Neural efficiency was measured by the event-related desynchronization (ERD) in the alpha band, an indicator of cortical activity. Neural efficiency was defined as a low amount of cortical activity accompanying high performance during problem-solving. Students solved the tasks faster and more accurately the higher their FI was. Moreover, while high FI led to greater cortical activity in the first half of the experiment, high FI was associated with a neurally more efficient processing (i.e., better performance but same amount of cortical activity) in the second half of the experiment. Performance in difficult tasks improved over the course of the experiment for all students while neural efficiency increased for students with higher but decreased for students with lower fluid intelligence. Based on analyses of the alpha sub-bands, we argue that high fluid intelligence was associated with a stronger investment of attentional resource in the integration of information and the encoding of relations in this unfamiliar task in the first half of the experiment (lower-2 alpha band). Students with lower fluid intelligence seem to adapt their applied strategies over the course of the experiment (i.e., focusing on task-relevant information; lower-1 alpha band). Thus, the initially lower cortical activity and its increase in students with lower fluid intelligence might reflect the overcoming of mental overload that was present in the first half of the experiment. Copyright © 2016 Elsevier Inc. All rights reserved.

Are the uterine serous carcinomas underdiagnosed? Histomorphologic and immunohistochemical correlates and clinical follow up in high-grade endometrial carcinomas initially diagnosed as high-grade endometrioid carcinoma.

PubMed

Hu, Shaomin; Hinson, Jeff L; Matnani, Rahul; Cibull, Michael L; Karabakhtsian, Rouzan G

2018-02-01

Histologic subclassification of high-grade endometrial carcinomas can sometimes be a diagnostic challenge when based on histomorphology alone. Here we utilized immunohistochemical markers to determine the immunophenotype in histologically ambiguous high-grade endometrial carcinomas that were initially diagnosed as pure or mixed high-grade endometrioid carcinoma, aiming to determine the utility of selected immunohistochemical panel in accurate classification of these distinct tumor types, while correlating these findings with the clinical outcome. A total of 43 high-grade endometrial carcinoma cases initially classified as pure high-grade endometrioid carcinoma (n=32), mixed high-grade endometrioid carcinoma/serous carcinoma (n=9) and mixed high-grade endometrioid carcinoma/clear cell carcinoma (n=2) were retrospectively stained with a panel of immunostains, including antibodies for p53, p16, estrogen receptor, and mammaglobin. Clinical follow-up data were obtained, and stage-to-stage disease outcomes were compared for different tumor types. Based on aberrant staining for p53 and p16, 17/43 (40%) of the high-grade endometrial carcinoma cases initially diagnosed as high-grade endometrioid carcinoma were re-classified as serous carcinoma. All 17 cases showed negative staining for mammaglobin, while estrogen receptor was positive in only 6 (35%) cases. The remaining 26 cases of high-grade endometrioid carcinoma showed wild-type staining for p53 in 25 (96%) cases, patchy staining for p16 in 20 (77%) cases, and were positive for mammaglobin and estrogen receptor in 8 (31%) and 19 (73%) cases, respectively, thus the initial diagnosis of high-grade endometrioid carcinoma was confirmed in these cases. In addition, the patients with re-classified serous carcinoma had advanced clinical stages at diagnosis and poorer overall survival on clinical follow-up compared to that of the remaining 26 high-grade endometrioid carcinoma cases. These results indicate that selected immunohistochemical panel, including p53, p16, and mammaglobin can be helpful in reaching accurate diagnosis in cases of histomorphologically ambiguous endometrial carcinomas, and can assist in providing guidance for appropriate therapeutic options for the patients.

Organic Light Emitting Devices with Linearly-Graded Mixed Host Architecture

NASA Astrophysics Data System (ADS)

Lee, Sang Min

Organic Light Emitting Devices (OLEDs) with a linearly-graded mixed (LGM) host architecture in the emissive layer (EML) were studied by the application of a newly-developed thermal deposition boat. A new thermal deposition boat, featuring indirect deposition control and fast rate response, was developed in order to make an evaporation coater of high space utilization and to achieve a real time linearly-graded rate control during the device fabrication process. A new design of dual-hole boat, based on the reduced wall resistance of the side hole toward the vapor flow, enabled the indirect deposition rate control with sufficient control accuracy by using the feature of the stable ratio of rates from top and side holes. Minimizing the thermal mass of the body and designing a direct heat transfer with a coil placed inside the boat resulted in the realization of the linearly-graded deposition rate within acceptable deviation range. Thanks to the feature of fast rate response, it was possible to control the linearly-graded rate of each host material during the process and to apply the architecture to some of the fluorescent and phosphorescent OLED devices. The reported efficiency improvement of a fluorescent OLED, based on step-graded junction in the literature, was well reproduced in an OLED with a LGM architecture, demonstrating that charge balance in the emissive layer can be further improved using the LGM architecture. By minimizing the internal energy barrier in the LGM device, a higher EL efficiency was well demonstrated over the uniformly-mixed (UM) host device, where residual internal interfaces were present as additional quenching sites in the EML. Similar effects were observed in blue phosphorescent OLED devices, where the mobility of the hole transport material (HTM) was usually much higher than that of the electron transport material (ETM) such that the recombination zone was more localized at the EML/ETL interface. It was found that the main effect of the LGM host was to shift the recombination zone inside of the EML and away from and ETL interface such that luminance quenching near the interface was much lower compared to the UM host, where the main recombination zone was localized near the interface and so more sensitive to the interface quenching.

High power single mode 980 nm AlGaInAs/AlGaAs quantum well lasers with a very low threshold current

NASA Astrophysics Data System (ADS)

Zhen, Dong; Cuiluan, Wang; Hongqi, Jing; Suping, Liu; Xiaoyu, Ma

2013-11-01

To achieve low threshold current as well as high single mode output power, a graded index separate confinement heterostructure (GRIN-SCH) AlGaInAs/AlGaAs quantum well laser with an optimized ridge waveguide was fabricated. The threshold current was reduced to 8 mA. An output power of 76 mW was achieved at 100 mA current at room temperature, with a slope efficiency of 0.83 W/A and a horizon divergent angle of 6.3°. The maximum single mode output power of the device reached as high as 450 mW.

Development and Industrialization of InGaN/GaN LEDs on Patterned Sapphire Substrates for Low Cost Emitter Architecture

DOE Office of Scientific and Technical Information (OSTI.GOV)

Flemish, Joseph; Soer, Wouter

2015-11-30

Patterned sapphire substrate (PSS) technology has proven to be an effective approach to improve efficacy and reduce cost of light-emitting diodes (LEDs). The volume emission from the transparent substrate leads to high package efficiency, while the simple and robust architecture of PSS-based LEDs enables low cost. PSS substrates have gained wide use in mid-power LEDs over the past years. In this project, Lumileds has developed and industrialized PSS and epitaxy technology for high- power flip-chip LEDs to bring these benefits to a broader range of applications and accelerate the adoption of energy-efficient solid-state lighting (SSL). PSS geometries were designed formore » highly efficient light extraction in a flip-chip architecture and high-volume manufacturability, and corresponding sapphire patterning and epitaxy manufacturing processes were integrally developed. Concurrently, device and package architectures were developed to take advantage of the PSS flip-chip die in different types of products that meet application needs. The developed PSS and epitaxy technology has been fully implemented in manufacturing at Lumileds’ San Jose, CA location, and incorporated in illumination-grade LED products that have been successfully introduced to the market, including LUXEON Q and LUXEON FlipChip White.« less

Evaluation of 3-D graphics software: A case study

NASA Technical Reports Server (NTRS)

Lores, M. E.; Chasen, S. H.; Garner, J. M.

1984-01-01

An efficient 3-D geometry graphics software package which is suitable for advanced design studies was developed. The advanced design system is called GRADE--Graphics for Advanced Design. Efficiency and ease of use are gained by sacrificing flexibility in surface representation. The immediate options were either to continue development of GRADE or to acquire a commercially available system which would replace or complement GRADE. Test cases which would reveal the ability of each system to satisfy the requirements were developed. A scoring method which adequately captured the relative capabilities of the three systems was presented. While more complex multi-attribute decision methods could be used, the selected method provides all the needed information without being so complex that it is difficult to understand. If the value factors are modestly perturbed, system Z is a clear winner based on its overall capabilities. System Z is superior in two vital areas: surfacing and ease of interface with application programs.

LARGE-SCALE HYDROGEN PRODUCTION FROM NUCLEAR ENERGY USING HIGH TEMPERATURE ELECTROLYSIS

DOE Office of Scientific and Technical Information (OSTI.GOV)

James E. O'Brien

2010-08-01

Hydrogen can be produced from water splitting with relatively high efficiency using high-temperature electrolysis. This technology makes use of solid-oxide cells, running in the electrolysis mode to produce hydrogen from steam, while consuming electricity and high-temperature process heat. When coupled to an advanced high temperature nuclear reactor, the overall thermal-to-hydrogen efficiency for high-temperature electrolysis can be as high as 50%, which is about double the overall efficiency of conventional low-temperature electrolysis. Current large-scale hydrogen production is based almost exclusively on steam reforming of methane, a method that consumes a precious fossil fuel while emitting carbon dioxide to the atmosphere. Demandmore » for hydrogen is increasing rapidly for refining of increasingly low-grade petroleum resources, such as the Athabasca oil sands and for ammonia-based fertilizer production. Large quantities of hydrogen are also required for carbon-efficient conversion of biomass to liquid fuels. With supplemental nuclear hydrogen, almost all of the carbon in the biomass can be converted to liquid fuels in a nearly carbon-neutral fashion. Ultimately, hydrogen may be employed as a direct transportation fuel in a “hydrogen economy.” The large quantity of hydrogen that would be required for this concept should be produced without consuming fossil fuels or emitting greenhouse gases. An overview of the high-temperature electrolysis technology will be presented, including basic theory, modeling, and experimental activities. Modeling activities include both computational fluid dynamics and large-scale systems analysis. We have also demonstrated high-temperature electrolysis in our laboratory at the 15 kW scale, achieving a hydrogen production rate in excess of 5500 L/hr.« less

Comparison of Utility of Histogram Apparent Diffusion Coefficient and R2* for Differentiation of Low-Grade From High-Grade Clear Cell Renal Cell Carcinoma.

PubMed

Zhang, Yu-Dong; Wu, Chen-Jiang; Wang, Qing; Zhang, Jing; Wang, Xiao-Ning; Liu, Xi-Sheng; Shi, Hai-Bin

2015-08-01

The purpose of this study was to compare histogram analysis of apparent diffusion coefficient (ADC) and R2* for differentiating low-grade from high-grade clear cell renal cell carcinoma (RCC). Forty-six patients with pathologically confirmed clear cell RCC underwent preoperative BOLD and DWI MRI of the kidneys. ADCs based on the entire tumor volume were calculated with b value combinations of 0 and 800 s/mm(2). ROI-based R2* was calculated with eight TE combinations of 6.7-22.8 milliseconds. Histogram analysis of tumor ADCs and R2* values was performed to obtain mean; median; width; and fifth, 10th, 90th, and 95th percentiles and histogram inhomogeneity, kurtosis, and skewness for all lesions. Thirty-three low-grade and 13 high-grade clear cell RCCs were found at pathologic examination. The TNM classification and tumor volume of clear cell RCC significantly correlated with histogram ADC and R2* (ρ = -0.317 to 0.506; p < 0.05). High-grade clear cell RCC had significantly lower mean, median, and 10th percentile ADCs but higher inhomogeneity and median R2* than low-grade clear cell RCC (all p < 0.05). Compared with other histogram ADC and R2* indexes, 10th percentile ADC had the highest accuracy (91.3%) in discriminating low- from high-grade clear cell RCC. R2* in discriminating hemorrhage was achieved with a threshold of 68.95 Hz. At this threshold, high-grade clear cell RCC had a significantly higher prevalence of intratumor hemorrhage (high-grade, 76.9%; low-grade, 45.4%; p < 0.05) and larger hemorrhagic area than low-grade clear cell RCC (high-grade, 34.9% ± 31.6%; low-grade, 8.9 ± 16.8%; p < 0.05). A close relation was found between MRI indexes and pathologic findings. Histogram analysis of ADC and R2* allows differentiation of low- from high-grade clear cell RCC with high accuracy.

Investigation of Four Different Laponite Clays as Stabilizers in Pickering Emulsion Polymerization.

PubMed

Brunier, Barthélémy; Sheibat-Othman, Nida; Chniguir, Mehdi; Chevalier, Yves; Bourgeat-Lami, Elodie

2016-06-21

Clay-armored polymer particles were prepared by emulsion polymerization in the presence of Laponite platelets that adsorb at the surface of latex particles and act as stabilizers during the course of the polymerization. While Laponite RDS clay platelets are most often used, the choice of the type of clay still remains an open issue that is addressed in the present article. Four different grades of Laponite were investigated as stabilizers in the emulsion polymerization of styrene. First, the adsorption isotherms of the clays, on preformed polystyrene particles, were determined by ICP-AES analysis of the residual clay in the aqueous phase. Adsorption of clay depended on the type of clay at low concentrations corresponding to adsorption as a monolayer. Adsorption of clay particles as multilayers was observed for all the grades above a certain concentration under the considered ionic strength (mainly due to the initiator ionic species). The stabilization efficiency of these clays was investigated during the polymerization reaction (free of any other stabilizer). The clays did not have the same effect on stabilization, which was related to differences in their compositions and in their adsorption isotherms. The different grades led to different polymer particles sizes and therefore to different polymerization reaction rates. Laponite RDS and S482 gave similar results, ensuring the best stabilization efficiency and the fastest reaction rate; the number of particles increased as the clay concentration increased. Stabilization with Laponite XLS gave the same particles size and number as the latter two clays at low clay concentrations, but it reached an upper limit in the number of nucleated polymer particles at higher concentrations indicating a decrease of stabilization efficiency at high concentrations. Laponite JS did not ensure a sufficient stability of the polymer particles, as the polymerization results were comparable to a stabilizer-free polymerization system.

PA03.13. Effect of triphaladi rasayana along with yoga therapy on low grade non hodgkins lymphoma and resistant intermediate and high grade non hodgkins lymphoma

PubMed Central

Soumya, MS Surya; Sarasa, TP

2013-01-01

Purpose: 1. To find out the effect of Thriphaladi Rasayana along with Yoga Therapy on low grade Non Hodgkins Lymphoma and resistant intermediate and high grade NonHodgkins Lymphoma. 2. To apply a less costly, less morbid, well accepted method of treatment on NHL. 3.To find a simple method to increase the immunity. 4.To try a drug which is easy to prepare? Method: Purposive sampling technique was used for the study. Sample of 30 patients age range 25 75 years with histologicaly proven NonHodgkins lymphoma, attending the M.O.I.O.P of the regional cancer centre during a period of 18 months. Groups1) Low grade NonHodgkins Lymphoma 2) Resistant intermediate &High grade NonHodgkins lymphoma (failed chemotherapy) were taken. Procedure : 2 groups were given Triphaladhi Rasayana (15 grams of powder with ghee and honey) twice dailymorning& at bed time with milk as anupana for period of 1month along with selected yoga asanas and niyama? Result: Symptoms included were fever, night sweats, weight loss, lymph nodes enlargement, splenomegaly, and hepatomegaly. In low grade symptom relief was noted in almost all cases. Lymph node changes notedLow grade5 2% (complete remission), 38% (partial remission), 10% (no change), intermediate35% (CR), 52% (PR) & 13% (NC), High grade67% (CR), 33%(PR). Hepatomegaly changes :ve in low grade92.86%, intermediate 90.9% & high grade100%. Splenomegaly changes :ve in low grade92.86%, intermediate72.72% & high grade80% Over all remission status of 30 patientscomplete remission30%, partial remission 30% & no change30%? Conclusion: Thriphaladirasayana along with Yoga therapy is very effective in Low grade NonHodgkins lymphoma and resistant intermediate and high grade Non hodgkins Lymphoma?

Multifunctional organic thin films and their electronic/optical properties

NASA Astrophysics Data System (ADS)

Shao, Yan

The concept of multifunctional organic thin films and their electronic/optical properties has been applied to organic functional device design, fabrication, and characterization. The organic devices involve organic light-emitting diodes (OLEDs) and organic photovoltaic devices (OPV) in this dissertation. In the research of graded junction structure of OLEDs, two kinds of naturally-formed graded junction (NFGJ) structures, sharp and shallow graded junctions, can be formed using single thermal evaporation boat loaded with uniformly mixed charge transport and light-emitting materials. OLEDs with NFGJ have been demonstrated in Chapter 3; the performance is comparable to the heterojunction OLEDs, but with better device lifetime. A novel method to prepare highly uniform mixed organic solid solutions through a high temperature and high-pressure fusion process has been demonstrated in Chapter 4. A series of fused organic solid solution (FOSS) compounds with NPD doped with different organic emitting dopants were prepared and DSC technique was utilized to determine the thermal characteristics. For the first time, the schematic phase diagram for this binary system has been obtained. High performance OLEDs of single color and white emission were fabricated and the device properties were characterized. In Chapter 5, an efficient photovoltaic heterojunction of tetracene and fullerene has been investigated and high performance organic solar cells have been demonstrated by thermal deposition and successive heat treatment. The preliminary conclusion for this enhancement is discussed and supported by atomic force microscopy images, absorption spectra and x-ray diffraction analysis. Additionally, an effective organic photovoltaic heterojunction based on the typical triplet material PtOEP was demonstrated. It is believed that introducing appropriate organic materials with long exciton lifetime is a very promising way to improve photovoltaic performance.

Meta-analysis of diffusion metrics for the prediction of tumor grade in gliomas.

PubMed

Miloushev, V Z; Chow, D S; Filippi, C G

2015-02-01

Diffusion tensor metrics are potential in vivo quantitative neuroimaging biomarkers for the characterization of brain tumor subtype. This meta-analysis analyzes the ability of mean diffusivity and fractional anisotropy to distinguish low-grade from high-grade gliomas in the identifiable tumor core and the region of peripheral edema. A meta-analysis of articles with mean diffusivity and fractional anisotropy data for World Health Organization low-grade (I, II) and high-grade (III, IV) gliomas, between 2000 and 2013, was performed. Pooled data were analyzed by using the odds ratio and mean difference. Receiver operating characteristic analysis was performed for patient-level data. The minimum mean diffusivity of high-grade gliomas was decreased compared with low-grade gliomas. High-grade gliomas had decreased average mean diffusivity values compared with low-grade gliomas in the tumor core and increased average mean diffusivity values in the peripheral region. High-grade gliomas had increased FA values compared with low-grade gliomas in the tumor core, decreased values in the peripheral region, and a decreased fractional anisotropy difference between the tumor core and peripheral region. The minimum mean diffusivity differs significantly with respect to the World Health Organization grade of gliomas. Statistically significant effects of tumor grade on average mean diffusivity and fractional anisotropy were observed, supporting the concept that high-grade tumors are more destructive and infiltrative than low-grade tumors. Considerable heterogeneity within the literature may be due to systematic factors in addition to underlying lesion heterogeneity. © 2015 by American Journal of Neuroradiology.

Classifying low-grade and high-grade bladder cancer using label-free serum surface-enhanced Raman spectroscopy and support vector machine

NASA Astrophysics Data System (ADS)

Zhang, Yanjiao; Lai, Xiaoping; Zeng, Qiuyao; Li, Linfang; Lin, Lin; Li, Shaoxin; Liu, Zhiming; Su, Chengkang; Qi, Minni; Guo, Zhouyi

2018-03-01

This study aims to classify low-grade and high-grade bladder cancer (BC) patients using serum surface-enhanced Raman scattering (SERS) spectra and support vector machine (SVM) algorithms. Serum SERS spectra are acquired from 88 serum samples with silver nanoparticles as the SERS-active substrate. Diagnostic accuracies of 96.4% and 95.4% are obtained when differentiating the serum SERS spectra of all BC patients versus normal subjects and low-grade versus high-grade BC patients, respectively, with optimal SVM classifier models. This study demonstrates that the serum SERS technique combined with SVM has great potential to noninvasively detect and classify high-grade and low-grade BC patients.

Validation of the school lunch recall questionnaire to capture school lunch intake of third- to fifth-grade students.

PubMed

Paxton, Amy; Baxter, Suzanne Domel; Fleming, Phyllis; Ammerman, Alice

2011-03-01

Children's dietary intake is a key variable in evaluations of school-based interventions. Current methods for assessing children's intake, such as 24-hour recalls and meal observations, are time- and resource-intensive. As part of a study to evaluate the impact of farm-to-school programs, the school lunch recall was developed from a need for a valid and efficient tool to assess school lunch intake among large samples of children. A self-administered paper-and-pencil questionnaire, the school lunch recall prompts for school lunch items by asking children whether they chose a menu item, how much of it they ate, how much they liked it, and whether they would choose it again. The school lunch recall was validated during summer school in 2008 with 18 third- to fifth-grade students (8 to 11 years old) in a North Carolina elementary school. For 4 consecutive days, trained observers recorded foods and amounts students ate during school lunch. Students completed the school lunch recall immediately after lunch. Thirty-seven total observation school lunch recall sets were analyzed. Comparison of school lunch recalls against observations indicated high accuracy, with means of 6% for omission rate (items observed but unreported), 10% for intrusion rate (items unobserved but reported), and 0.63 servings for total inaccuracy (a measure that combines errors for reporting items and amounts). For amounts, accuracy was high for matches (0.06 and 0.01 servings for absolute and arithmetic differences, respectively) but lower for omissions (0.47 servings) and intrusions (0.54 servings). In this pilot study, the school lunch recall was a valid, efficient tool for assessing school lunch intake for a small sample of third- to fifth-grade students. Copyright © 2011 American Dietetic Association. Published by Elsevier Inc. All rights reserved.

Bully Prevention in Positive Behavior Support: Preliminary Evaluation of Third-, Fourth-, and Fifth-Grade Attitudes toward Bullying

ERIC Educational Resources Information Center

Ross, Scott W.; Horner, Robert H.

2014-01-01

The current pilot study demonstrates the potential of adding simple and efficient bully prevention strategies to already established School-Wide Positive Behavior Interventions and Supports. The self-report surveys of third-, fourth-, and fifth-grade students from three elementary schools evaluated the relationship between the implementation of…

Reliability and Validity of the Math Essential Skill Screener Elementary Version (MESS-E).

ERIC Educational Resources Information Center

Erford, Bradley T.; Bagley, Donna L.; Hopper, James A.; Lee, Ramona M.; Panagopulos, Kathleen A.; Preller, Denise B.

1998-01-01

The Math Essential Skill Screener Elementary Version (MESS-E) is a screener devised to identify primary grade students at risk for math difficulties. Item analysis, interitem consistency, test-retest reliability, decision efficiency, and construct validity of the MESS-E were studied using four independent samples of boys and girls grades 1-3. The…

The pallet industry: a changing hardwood market

Treesearch

G.P. Dempsey; D.G. Martens

1991-01-01

From its inception during World War II, the wooden pallet industry has grown to become the Nation's largest industrial consumer of hardwood lumber products. Since most of the raw material in wooden pallets is lower grade lumber, the pallet industry's growth, efficiency, and changing raw material inputs must be of concern to the grade hardwood lumber industry...

Analyzing the Efficiency of Argumentation Based Practices on 9th Grade Functions Subject

ERIC Educational Resources Information Center

Mercan, Emel; Isleyen, Tevfik

2017-01-01

The purpose of this study is to investigate the effect of teaching 9th grade Functions subject through argumentation on students' science process skills, attitudes towards Maths, willingness for argumentation and conceptual comprehension. The study was designed as a quasi-experimental model with pretest-posttest control group. It was carried out…

Identification of Reading Problems in First Grade within a Response-to-Intervention Framework

ERIC Educational Resources Information Center

Speece, Deborah L.; Schatschneider, Christopher; Silverman, Rebecca; Case, Lisa Pericola; Cooper, David H.; Jacobs, Dawn M.

2011-01-01

Models of Response to Intervention (RTI) include parameters of assessment and instruction. This study focuses on assessment with the purpose of developing a screening battery that validly and efficiently identifies first-grade children at risk for reading problems. In an RTI model, these children would be candidates for early intervention. We…

Increasing Efficiency and Effectiveness in Predicting Second-Grade Achievement Using a Kindergarten Screening Battery.

ERIC Educational Resources Information Center

Gordon, Roberta R.

1988-01-01

Investigation into the most effective use of a kindergarten screening battery to predict second-grade reading and mathematics achievement found that a combination of 10 readiness subtests resulted in the same degree of accuracy as that obtained using the entire battery. However, neither version was accurate enough to be useful. (Author/CB)

Diagnostic Accuracy of Multivariate Universal Screening Procedures for Reading in Upper Elementary Grades

ERIC Educational Resources Information Center

Klingbeil, David A.; Nelson, Peter M.; Van Norman, Ethan R.; Birr, Chris

2017-01-01

We examined the diagnostic accuracy and efficiency of three approaches to universal screening for reading difficulties using retrospective data from 1,307 students in Grades 3 through 5. School staff collected screening data using the Measures of Academic Progress (MAP), a curriculum-based measure (CBM), and running records (RR). The criterion…

Predicting yields from Appalachian red oak logs and lumber

Treesearch

Daniel E. Dunmire

1971-01-01

One utilization problem is in pinpointing how to efficiently and effectively recover usable parts from logs, bolts, and lumber. Yields, which are output divided by input, provide a key to managers who make processing decisions. Research results are applied to indicate yields of graded lumber and dimension stock from graded Appalachian red oak (group) logs. How to...

Variations in productivity and performance in grade lumber industries in Kentucky, Pennsylvania, and West Virginia-1982

Treesearch

Gilbert P. Dempsey; Gilbert P. Dempsey

1987-01-01

Sawmill effectiveness is crucial to the growth and development of wood industries among locales, states, regions, and countries. Productivity ratios, structural factors, and other indicators of economic performance were used to measure the relative productive efficiency of the grade hardwood lumber industries in Kentucky, Pennsylvania, and West Virginia. Despite...

Energy Efficient Hybrid Vapor Stripping-Vapor Permeation Process for Ethanol Recovery ad Dehydration

EPA Science Inventory

Distillation combined with molecular sieve dehydration is the current state of the art for fuel grade ethanol production from fermentation broths. To improve the sustainability of bioethanol production, energy efficient separation alternatives are needed, particularly for lower f...

Efficiency dilution: long-term exergy conversion trends in Japan.

PubMed

Williams, Eric; Warr, Benjamin; Ayres, Robert U

2008-07-01

This analysis characterizes century-scale trends in exergy efficiency in Japan. Exergy efficiency captures the degree to which energy inputs (such as coal) are converted into useful work (such as electricity or power to move a vehicle). This approach enables the estimation of net efficiencies which aggregate different technologies. Sectors specifically analyzed are electricity generation, transport, steel production, and residential space heating. One result is that the aggregate exergy efficiency of the Japanese economy declined slightly over the last half of the 20th century, reaching a high of around 38% in the late 1970s and falling to around 33% by 1998. The explanation for this is that while individual technologies improved dramatically over the century, less exergy-efficient ones were progressively adopted, yielding a net stabilization or decline. In the electricity sector, for instance, adoption of hydropower was followed by fossil-fired plants and then by nuclear power, each technology being successively less efficient from an exergy perspective. The underlying dynamic of this trend is analogous to declining ore grades in the mining sector. Increasing demand for exergy services requires expended utilization of resources from which it is more difficult to extract utility (e.g., falling water versus coal). We term this phenomenon efficiency dilution.

Integrating AlGaN/GaN high electron mobility transistor with Si: A comparative study of integration schemes

DOE Office of Scientific and Technical Information (OSTI.GOV)

Mohan, Nagaboopathy; Raghavan, Srinivasan; Centre for Nano Science and Engineering, Indian Institute of Science, Bangalore 560012

2015-10-07

AlGaN/GaN high electron mobility transistor stacks deposited on a single growth platform are used to compare the most common transition, AlN to GaN, schemes used for integrating GaN with Si. The efficiency of these transitions based on linearly graded, step graded, interlayer, and superlattice schemes on dislocation density reduction, stress management, surface roughness, and eventually mobility of the 2D-gas are evaluated. In a 500 nm GaN probe layer deposited, all of these transitions result in total transmission electron microscopy measured dislocations densities of 1 to 3 × 10{sup 9}/cm{sup 2} and <1 nm surface roughness. The 2-D electron gas channels formed atmore » an AlGaN-1 nm AlN/GaN interface deposited on this GaN probe layer all have mobilities of 1600–1900 cm{sup 2}/V s at a carrier concentration of 0.7–0.9 × 10{sup 13}/cm{sup 2}. Compressive stress and changes in composition in GaN rich regions of the AlN-GaN transition are the most effective at reducing dislocation density. Amongst all the transitions studied the step graded transition is the one that helps to implement this feature of GaN integration in the simplest and most consistent manner.« less

The dose-response effect of medical exercise therapy on impairment in patients with unilateral longstanding subacromial pain.

PubMed

Osterås, Håvard; Torstensen, Tom Arild

2010-01-05

The primary aim of this study was to investigate the effect of medical exercise therapy in shoulder impingement patients, along with possible correlations between impairment variables. A prospective unblended randomized clinical trial. Over four months, 61 participants were randomly assigned into a high-graded exercise therapy group (HD) (n=31) and into a low-graded exercise therapy group (LD) (n=30). Prognostic variables were similar between the groups at baseline. Five (8%) patients dropped out during the treatment period, and another four (6%) dropped out before followup. Pain was a composite score of a visual analogue scale (VAS). Isometric strength was measured during four resisted break tests on the shoulder. Function was measured by means of a functional assessment questionnaire (Shoulder Rating Questionnaire, SRQ). Both groups trained three times per week for twelve weeks, with tests pre- and posttraining and six months follow-up. The HD group achieved significantly (p < 0.05) better outcome effects than the LD group for pain, range of motion, isometric functional strength and function, but both groups increased function from pretest to posttest. In patients with uncomplicated subacromial pain syndrome, medical exercise therapy is an efficient treatment alternative, where high-grade doses should be emphasized. A major limitation is that the measurements were not undertaken by another person than the treating physiotherapists.

Scalable Production of Si Nanoparticles Directly from Low Grade Sources for Lithium-Ion Battery Anode.

PubMed

Zhu, Bin; Jin, Yan; Tan, Yingling; Zong, Linqi; Hu, Yue; Chen, Lei; Chen, Yanbin; Zhang, Qiao; Zhu, Jia

2015-09-09

Silicon, one of the most promising candidates as lithium-ion battery anode, has attracted much attention due to its high theoretical capacity, abundant existence, and mature infrastructure. Recently, Si nanostructures-based lithium-ion battery anode, with sophisticated structure designs and process development, has made significant progress. However, low cost and scalable processes to produce these Si nanostructures remained as a challenge, which limits the widespread applications. Herein, we demonstrate that Si nanoparticles with controlled size can be massively produced directly from low grade Si sources through a scalable high energy mechanical milling process. In addition, we systematically studied Si nanoparticles produced from two major low grade Si sources, metallurgical silicon (∼99 wt % Si, $1/kg) and ferrosilicon (∼83 wt % Si, $0.6/kg). It is found that nanoparticles produced from ferrosilicon sources contain FeSi2, which can serve as a buffer layer to alleviate the mechanical fractures of volume expansion, whereas nanoparticles from metallurgical Si sources have higher capacity and better kinetic properties because of higher purity and better electronic transport properties. Ferrosilicon nanoparticles and metallurgical Si nanoparticles demonstrate over 100 stable deep cycling after carbon coating with the reversible capacities of 1360 mAh g(-1) and 1205 mAh g(-1), respectively. Therefore, our approach provides a new strategy for cost-effective, energy-efficient, large scale synthesis of functional Si electrode materials.

High-power operation of highly reliable narrow stripe pseudomorphic single quantum well lasers emitting at 980 nm

NASA Technical Reports Server (NTRS)

Larsson, A.; Forouhar, S.; Cody, J.; Lang, R. J.

1990-01-01

Ridge waveguide pseudomorphic InGaAs/GaAs/AlGaAs single-quantum-well lasers exhibiting record high quantum efficiencies and high output power densities (105 mW per facet from a 6 micron wide stripe) at a lasing wavelength of 980 nm are discussed that were fabricated from a graded index separate confinement heterostructure grown by molecular beam epitaxy. Life testing at an output power of 30 mW per uncoated facet reveals a slow gradual degradation during the initial 500 h of operation after which the operating characteristics of the lasers become stable. The emission wavelength, the high output power, and the fundamental lateral mode operation render these lasers suitable for pumping Er3+-doped fiber amplifiers.

Fabrication and Characterization of Quinoa Protein Nanoparticle-Stabilized Food-Grade Pickering Emulsions with Ultrasound Treatment: Interfacial Adsorption/Arrangement Properties.

PubMed

Qin, Xin-Sheng; Luo, Zhi-Gang; Peng, Xi-Chun

2018-05-02

The natural quinoa protein isolate (QPI) was largely reflected in the nanoparticle form at pH 7.0 (∼401 nm), and the ultrasound at 20 min progressively improved the contact angle (wettability) and surface hydrophobicity of the nanoparticles. Ultrasound process also modified the type of intraparticle interaction, and the internal forces of sonicated particles were largely maintained by both disulfide bonds and hydrophobic interaction forces. In emulsion system, the ultrasound progressively increased the emulsification efficiency of the QPI nanoparticles, particularly at high protein concentration ( c > 1%, w/ v) and higher emulsion stability against coalescence. As compared with the natural QPI-stabilized emulsions, the 20 min sonicated emulsions exhibited higher packing and adsorption at the protein interface. The microstructure of emulsions that occurs is bridging flocculation of droplets at low c (≤1%, w/ v), while the amount of protein particles could be high enough to cover the droplet surface at high c ( >1%, w/ v) with hexagonal array model arrangement. Thus these results illustrated that both natural and sonicated QPI nanoparticles could be performed as effective food-grade stabilizer for Pickering emulsion; however, the sonicated QPI nanoparticles exhibited much better emulsifying and interfacial properties.

Disagreement in high-grade/low-grade intraepithelial neoplasia and high-risk/low-risk HPV infection: clinical implications for anal cancer precursor lesions in HIV-positive and HIV-negative MSM.

PubMed

Pimenoff, V N; Félez-Sánchez, M; Tous, S; Clavero, O; Godínez, J M; Klaustermeier, J; Saunier, M; Molijn, A; Alemany, L; Quint, W; Bosch, F X; de Sanjosé, S; McCloskey, J; Bravo, I G

2015-06-01

Anal condylomata are common in HIV-positive individuals and among men who have sex with men (MSM). Generally attributable to infection by low-risk human papillomaviruses (HPVs), condylomata are considered benign low-grade squamous intraepithelial lesions (SILs). However, anal condylomata have occasionally been linked to high-grade SIL and to oncogenic, high-risk HPVs. Here we describe the range of intraepithelial lesions and of the associated HPVs in heterosexual men and women and MSM. Perianal and anal condylomata were collected from 243 patients (56 heterosexual women, 61 heterosexual men and 126 MSM, including 41 HIV-positive MSM). We assessed lesion histology and HPV genotype. Prevalence estimates and Poisson models were used. Irrespective of HIV infection status, MSM showed a higher proportion of condylomata as high-grade SILs compared to heterosexual men/women. High-grade SILs were also more prevalent in anal than in perianal lesions in all patient groups. HIV-positive MSM exhibited increased prevalence ratio (4.6; 95% confidence interval 2.1-10.0) of perianal low-grade SILs containing only high-risk HPVs compared to HIV-negative MSM. In addition, more than 64% of anal SILs with a high-grade component, regardless of HIV infection, were exclusively associated with low-risk HPVs. In anal condylomata, both high-grade and low-grade SILs can be associated with high-risk and/or low-risk HPVs. Particularly, low-grade perianal SILs associated with high-risk HPVs were common in HIV-positive MSM, while presence of only low-risk HPVs in high-grade SILs were common in both MSM groups. Our findings sound a note of caution for the common clinical practice for the treatment of anal condylomata as benign lesions in MSM and HIV-positive patients. Copyright © 2015 European Society of Clinical Microbiology and Infectious Diseases. Published by Elsevier Ltd. All rights reserved.

Molecular mechanisms of isocitrate dehydrogenase 1 (IDH1) mutations identified in tumors: The role of size and hydrophobicity at residue 132 on catalytic efficiency

PubMed Central

Avellaneda Matteo, Diego; Grunseth, Adam J.; Gonzalez, Eric R.; Anselmo, Stacy L.; Kennedy, Madison A.; Moman, Precious; Scott, David A.; Hoang, An; Sohl, Christal D.

2017-01-01

Isocitrate dehydrogenase 1 (IDH1) catalyzes the reversible NADP+-dependent conversion of isocitrate (ICT) to α-ketoglutarate (αKG) in the cytosol and peroxisomes. Mutations in IDH1 have been implicated in >80% of lower grade gliomas and secondary glioblastomas and primarily affect residue 132, which helps coordinate substrate binding. However, other mutations found in the active site have also been identified in tumors. IDH1 mutations typically result in a loss of catalytic activity, but many also can catalyze a new reaction, the NADPH-dependent reduction of αKG to d-2-hydroxyglutarate (D2HG). D2HG is a proposed oncometabolite that can competitively inhibit αKG-dependent enzymes. Some kinetic parameters have been reported for several IDH1 mutations, and there is evidence that mutant IDH1 enzymes vary widely in their ability to produce D2HG. We report that most IDH1 mutations identified in tumors are severely deficient in catalyzing the normal oxidation reaction, but that D2HG production efficiency varies among mutant enzymes up to ∼640-fold. Common IDH1 mutations have moderate catalytic efficiencies for D2HG production, whereas rarer mutations exhibit either very low or very high efficiencies. We then designed a series of experimental IDH1 mutants to understand the features that support D2HG production. We show that this new catalytic activity observed in tumors is supported by mutations at residue 132 that have a smaller van der Waals volume and are more hydrophobic. We report that one mutation can support both the normal and neomorphic reactions. These studies illuminate catalytic features of mutations found in the majority of patients with lower grade gliomas. PMID:28330869

Monolithic, multi-bandgap, tandem, ultra-thin, strain-counterbalanced, photovoltaic energy converters with optimal subcell bandgaps

DOEpatents

Wanlass, Mark W [Golden, CO; Mascarenhas, Angelo [Lakewood, CO

2012-05-08

Modeling a monolithic, multi-bandgap, tandem, solar photovoltaic converter or thermophotovoltaic converter by constraining the bandgap value for the bottom subcell to no less than a particular value produces an optimum combination of subcell bandgaps that provide theoretical energy conversion efficiencies nearly as good as unconstrained maximum theoretical conversion efficiency models, but which are more conducive to actual fabrication to achieve such conversion efficiencies than unconstrained model optimum bandgap combinations. Achieving such constrained or unconstrained optimum bandgap combinations includes growth of a graded layer transition from larger lattice constant on the parent substrate to a smaller lattice constant to accommodate higher bandgap upper subcells and at least one graded layer that transitions back to a larger lattice constant to accommodate lower bandgap lower subcells and to counter-strain the epistructure to mitigate epistructure bowing.

Energy efficient recovery and dehydration of ethanol from fermentation broths by Membrane Assisted Vapor Stripping technology

EPA Science Inventory

Distillation combined with molecular sieve dehydration is the current state of the art for fuel grade ethanol production from fermentation broths. To improve the sustainability of bioethanol production, energy efficient separation alternatives are needed, particularly for lower ...

High-grade ovarian cancer secreting effective exosomes in tumor angiogenesis.

PubMed

Yi, Huan; Ye, Jun; Yang, Xiao-Mei; Zhang, Li-Wen; Zhang, Zhi-Gang; Chen, Ya-Ping

2015-01-01

Ovarian cancer, the most lethal gynecological cancer, related closely to tumor stage. High-grade ovarian cancer always results in a late diagnose and high recurrence, which reduce survival within five years. Until recently, curable therapy is still under research and anti-angiogenesis proves a promising way. Tumor-derived exosomes are essential in tumor migration and metastases such as angiogenesis is enhanced by exosomes. In our study, we have made comparison between high-grade and unlikely high-grade serous ovarian cancer cells on exosomal function of endothelial cells proliferation, migration and tube formation. Exosomes derived from high-grade ovarian cancer have a profound impact on angiogenesis with comparison to unlikely high-grade ovarian cancer. Proteomic profiles revealed some potential proteins involved in exosomal function of angiogenesis such as ATF2, MTA1, ROCK1/2 and so on. Therefore, exosomes plays an influential role in angiogenesis in ovarian serous cancer and also function more effectively in high-grade ovarian cancer cells.

A Comparison of Four Techniques for Producing High-Grade Furniture Core Material From Low-Grade Yellow-Poplar

Treesearch

Philip A. Araman

1978-01-01

Four Methods of converting low-grade yellow-poplar lumber into high-grade furniture core material (lumber core) were compared. High-grade core material is used in tops, shelves, doors, and drawer fronts and only minor defects are allowed. Three gang-rip first and the conventional crosscut-first manufacturing sequences were evaluated in combination with 1 Common, 2A...

What basic number processing measures in kindergarten explain unique variability in first-grade arithmetic proficiency?

PubMed

Bartelet, Dimona; Vaessen, Anniek; Blomert, Leo; Ansari, Daniel

2014-01-01

Relations between children's mathematics achievement and their basic number processing skills have been reported in both cross-sectional and longitudinal studies. Yet, some key questions are currently unresolved, including which kindergarten skills uniquely predict children's arithmetic fluency during the first year of formal schooling and the degree to which predictors are contingent on children's level of arithmetic proficiency. The current study assessed kindergarteners' non-symbolic and symbolic number processing efficiency. In addition, the contribution of children's underlying magnitude representations to differences in arithmetic achievement was assessed. Subsequently, in January of Grade 1, their arithmetic proficiency was assessed. Hierarchical regression analysis revealed that children's efficiency to compare digits, count, and estimate numerosities uniquely predicted arithmetic differences above and beyond the non-numerical factors included. Moreover, quantile regression analysis indicated that symbolic number processing efficiency was consistently a significant predictor of arithmetic achievement scores regardless of children's level of arithmetic proficiency, whereas their non-symbolic number processing efficiency was not. Finally, none of the task-specific effects indexing children's representational precision was significantly associated with arithmetic fluency. The implications of the results are 2-fold. First, the findings indicate that children's efficiency to process symbols is important for the development of their arithmetic fluency in Grade 1 above and beyond the influence of non-numerical factors. Second, the impact of children's non-symbolic number processing skills does not depend on their arithmetic achievement level given that they are selected from a nonclinical population. Copyright © 2013 Elsevier Inc. All rights reserved.

Mechanical Behavior of Commercially Pure Titanium Weldments at Lower Temperatures

NASA Astrophysics Data System (ADS)

Gupta, R. K.; Anil Kumar, V.; Xavier, X. Roshan

2018-05-01

Commercially pure titanium is used for low-temperature applications due to good toughness attributed to single-phase microstructure (α). Electron beam welding (EBW) and gas tungsten arc welding (GTAW) processes have been used for welding two grades of commercially pure titanium (Grade 2 and Grade 4). Martensitic microstructure is found to be finer in the case of EBW joint as compared to GTAW joint due to faster rate of cooling in the former process. Weldments have been characterized to study the mechanical behavior at ambient (298 K) and cryogenic temperatures (20 and 77 K). Strength of weldments increases with the decrease in temperature, which is found to be more prominent in case of Grade 4 titanium as compared to Grade 2. Weld efficiency of Grade 4 is found to be higher at all the temperatures (ambient, 77 and 20 K). However, ultimate tensile strength/yield strength ratio is higher for Grade 2 as compared to Grade 4. % Elongation is found to increase/retained at cryogenic temperatures for Grade 2, and it is found to decrease for Grade 4. Electron backscattered diffraction analysis and transmission electron microscopy of deformed samples confirmed the presence of extensive twinning in Grade 2 and the presence of finer martensitic structure in Grade 4. Fractography analysis of tested specimens revealed the presence of cleavage facets in Grade 4 and dimples in specimens of Grade 2. Higher strength in Grade 4 is attributed to higher oxygen restricting the twin-assisted slip, which is otherwise prominent in Grade 2 titanium.

The results of STEM education methods in physics at the 11th grade level: Light and visual equipment lesson

NASA Astrophysics Data System (ADS)

Tungsombatsanti, A.; Ponkham, K.; Somtoa, T.

2018-01-01

This research aimed to: 1) To evaluate the efficiency of the process and the efficiency of the results (E1 / E2) of the innovative instructional lesson plan in the form of the STEM Education method in the field of physics of secondary students at the 10th grade level in physics class to determine the efficiency of the STEM based on criteria of the 70/70 standard level. 2) To study students' critical thinking skills of secondary students at the 11th grade level, and assessing skill in criteria 80 percentage 3) To compare learning achievements between students' pre-post testing after taught in STEM Education 4) To evaluate Student' Satisfaction after using STEM Education teaching by using mean compare to 5 points Likert Scale. The participant used were 40 students from grade 11 at Borabu School, Borabu District, Mahasarakham Province, semester 2, Academic year 2016. Tools used in this study consist of: 1) STEM Education plan about the force and laws of motion for grade 11 students of 1 schemes with total of 15 hours, 2) The test of critical think skills with essay type in amount of 30 items, 3) achievement test on Light and visual equipment with multiple-choice of 4 options of 30 items, 4) satisfaction learning with 5 Rating Scale of 16 items. The statistics used in data analysis were percentage, mean, standard deviation, and t-test (Dependent). The results showed that 1) The results of these findings revealed that the efficiency of the STEM based on criteria indicate that are higher than the standard level of the 70/70 at 71.51/75 2) Student has critical thinking scores that are higher than criteria 80 percentage as amount is 26 people. 3) Statistically significant of students' learning achievements to their later outcomes were differentiated between pretest and posttest at the .05 level, evidently. 4) The student' level of satisfaction toward the learning by using STEM Education plan was at a good level (X ¯ = 4.33, S.D = 0.64).

Campbell Creek Research Homes: FY2013 Annual Performance Report OCT.1, 2012 SEP. 30, 2013

DOE Office of Scientific and Technical Information (OSTI.GOV)

Jackson, Roderick K; Boudreaux, Philip R; Munk, Jeffrey D

1.INTRODUCTION AND PROJECT OVERVIEW The Campbell Creek project is funded and managed by the Tennessee Valley Authority (TVA) Technology Innovation, Energy Efficiency, Power Delivery and Utilization Office. Technical support is provided under contract by the Oak Ridge National Laboratory (ORNL) and the Electric Power Research Institute (EPRI). The project was designed to determine the relative energy efficiency of typical new home construction, of retrofitting of existing homes, and of high-performance new homes built from the ground up for energy efficiency. This project was designed to compare three houses that represent current construction practices: a base case (Builder House CC1); amore » modified house that could represent a major energy-efficient retrofit (Retrofit House CC2); and a house constructed from the ground up to be a high-performance home (High Performance House CC3). To enable a valid comparison, it was necessary to simulate occupancy in all three houses and extensively monitor the structural components and the energy usage by component. In October 2013, the base case was also modified by replacing the builder-grade heating, ventilation, and air-conditioning (HVAC) system with a high-efficiency variable-speed unit. All three houses are two-story, slab-on-grade, framed construction. CC1 and CC2 are approximately 2,400 ft2. CC3 has a pantry option, used primarily as a mechanical equipment room, that adds approximately 100 ft2. All three houses are all-electric (with the exception of a gas log fireplace that is not used during the testing) and use air-source heat pumps for heating and cooling. The three homes are located in Knoxville in the Campbell Creek Subdivision. CC1 and CC2 are next door to each other with a south-facing orientation; CC3 has a north-facing orientation and is located across the street and a couple of houses down. The energy data collected will be used to determine the benefits of retrofit packages and high-performance new home packages. There are more than 300 channels of continuous energy performance and thermal comfort data collection in the houses (100 for each house). The data will be used to evaluate the impact of energy-efficiency upgrades on the envelope, mechanical equipment, and demand-response options. Each retrofit will be evaluated incrementally, by both short-term measurements and computer modeling, using a calibrated model. This report is intended to document the comprehensive testing, data analysis, research, and findings within the October 2012 through September 2013 (FY 2013) timeframe at the Campbell Creek research houses. The following sections will provide an in-depth assessment of the technology progression in each of the three research houses. A detailed assessment and evaluation of the energy performance of technologies tested will also be provided. Finally, lessons learned and concluding remarks will be highlighted.« less

Effectiveness and Efficiency of Reading Error Correction Procedures on the Reading Accuracy, Reading Fluency, and Reading Comprehension of Fourth Grade Students

ERIC Educational Resources Information Center

Wallace, Jennifer N.

2013-01-01

As education law evolves, educators are faced with difficult decisions regarding curriculum, prevention programs, and intervention strategies to use with their students. The use of evidence-based strategies for all academic skill areas, including reading, has become increasingly common in schools. Twenty-four 4th grade students participated in an…

Modeling of defect-tolerant thin multi-junction solar cells for space application

NASA Astrophysics Data System (ADS)

Mehrotra, A.; Alemu, A.; Freundlich, A.

2012-02-01

Using drift-diffusion model and considering experimental III-V material parameters, AM0 efficiencies of lattice-matched multijunction solar cells have been calculated and the effects of dislocations and radiation damage have been analyzed. Ultrathin multi-junction devices perform better in presence of dislocations or/and radiation harsh environment compared to conventional thick multijunction devices. Our results show that device design optimization of Ga0.51In0.49P/GaAs multijunction devices leads to an improvement in EOL efficiency from 4.8%, for the conventional thick device design, to 12.7%, for the EOL optimized thin devices. In addition, an optimized defect free lattice matched Ga0.51In0.49P/GaAs solar cell under 1016cm-2 1Mev equivalent electron fluence is shown to give an EOL efficiency of 12.7%; while a Ga0.51In0.49P/GaAs solar cell with 108 cm-2 dislocation density under 1016cm-2 electron fluence gives an EOL efficiency of 12.3%. The results suggest that by optimizing the device design, we can obtain nearly the same EOL efficiencies for high dislocation metamorphic solar cells and defect filtered metamorphic multijunction solar cells. The findings relax the need for thick or graded buffer used for defect filtering in metamorphic devices. It is found that device design optimization allows highly dislocated devices to be nearly as efficient as defect free devices for space applications.

Clinicopathological relevance of tumour grading in canine osteosarcoma.

PubMed

Loukopoulos, P; Robinson, W F

2007-01-01

Tumour grading assesses biological aggressiveness and is of prognostic significance in many malignancies. The clinicopathological features of 140 primary canine osteosarcomas and their metastases were analysed, and the interrelations between them and an established grading system and its constituent parameters (mitotic index, necrosis, pleomorphism) were examined. Of these tumours, 35% were grade III (high-grade), 37% grade II and 28% grade I. Primary tumours that had metastasized were of significantly higher grade than non-metastatic osteosarcomas. Osteosarcomas belonging to the osteoblastic minimally productive subtype, but not chondroblastic or telangiectatic subtypes, differed from fibroblastic osteosarcomas in being associated with a significantly higher number of high-grade cases. Dogs younger than 4 years of age had osteosarcomas with higher grade, score and mitotic index than did older animals. Appendicular differed from axial tumours in having a higher mitotic index; distal differed from proximal tumours in being of higher grade; cranial tumours differed from tumours in most other sites in being of lower grade and lower mitotic index. Rib osteosarcomas showed a particularly high degree of necrosis. The mitotic index varied widely between tumour locations. Pleomorphism did not have prognostic merit when examined separately, as most osteosarcomas were highly pleomorphic.

Closing the Performance Gap: The Impact of the Early College High School Model on Underprepared Students

ERIC Educational Resources Information Center

Bernstein, Larry; Edmunds, Julie; Fesler, Lily

2014-01-01

Students entering high school in 9th grade face a formidable challenge. The transition to high school from 8th grade brings with it increased risks for all students. For example, students in 9th grade are anywhere from three to five times more likely to fail a class than students in any other grade. Similarly, ninth grade retention rates are…

Power calculation of grading device in desintegrator

NASA Astrophysics Data System (ADS)

Bogdanov, V. S.; Semikopenko, I. A.; Vavilov, D. V.

2018-03-01

This article describes the analytical method of measuring the secondary power consumption, necessitated by the installation of a grading device in the peripheral part of the grinding chamber in the desintegrator. There is a calculation model for defining the power input of the disintegrator increased by the extra power demand, required to rotate the grading device and to grind the material in the area between the external row of hammers and the grading device. The work has determined the inertia moments of a cylindrical section of the grading device with armour plates. The processing capacity of the grading device is adjusted to the conveying capacity of the auger feeder. The grading device enables one to increase the concentration of particles in the peripheral part of the grinding chamber and the amount of interaction between particles and armour plates as well as the number of colliding particles. The perforated sections provide the output of the ground material with the proper size granules, which together with the effects of armour plates, improves the efficiency of grinding. The power demand to rotate the grading device does not exceed the admissible value.

Low-Cost Gas Heat Pump for Building Space Heating

DOE Office of Scientific and Technical Information (OSTI.GOV)

Garrabrant, Michael; Keinath, Christopher

2016-10-11

Gas-fired residential space heating in the U.S is predominantly supplied by furnaces and boilers. These technologies have been approaching their thermodynamic limit over the past 30 years and improvements for high efficiency units have approached a point of diminishing return. Electric heat pumps are growing in popularity but their heating performance at low ambient temperatures is poor. The development of a low-cost gas absorption heat pump would offer a significant improvement to current furnaces and boilers, and in heating dominated climate zones when compared to electric heat pumps. Gas absorption heat pumps (GAHP) exceed the traditional limit of thermal efficiencymore » encountered by typical furnaces and boilers, and maintain high levels of performance at low ambient temperatures. The project team designed and demonstrated two low-cost packaged prototype GAHP space heating systems during the course of this investigation. Led by Stone Mountain Technologies Inc. (SMTI), with support from A.O. Smith, and the Gas Technology Institute (GTI), the cross-functional team completed research and development tasks including cycle modeling, 8× scaling of a compact solution pump, combustion system development, breadboard evaluation, fabrication of two packaged prototype units, third party testing of the first prototype, and the evaluation of cost and energy savings compared to high and minimum efficiency gas options. Over the course of the project and with the fabrication of two Alpha prototypes it was shown that this technology met or exceeded most of the stated project targets. At ambient temperatures of 47, 35, 17 and -13°F the prototypes achieved gas based coefficients of performance of 1.50, 1.44, 1.37, and 1.17, respectively. Both units operated with parasitic loads well below the 750 watt target with the second Alpha prototype operating 75-100 watts below the first Alpha prototype. Modulation of the units at 4:1 was achieved with the project goal of 2:1 modulation, which will allow for improved load matching. In addition, the energy savings analysis showed that a house in Albany, NY, Chicago, IL and Minneapolis, MN would save roughly 32, 28.5 and 36.5 MBtu annually when compared to a 100% efficient boiler, respectively. The gas absorption heat pump achieves this performance by using high grade heat from the combustion of natural gas in combination with low grade heat extracted from the ambient to produce medium grade heat suitable for space and water heating. Expected product features include conventional outdoor installation practices, 4:1 modulation, and reasonable economic payback. These factors position the technology to gain significant market penetration, resulting in a large reduction of energy use and greenhouse gas emissions for residential space heating.« less

Grading Practices--Watching Out for Land Mines.

ERIC Educational Resources Information Center

Nottingham, Marv

1988-01-01

The A to F grading pattern is a highly subjective practice that demands great expertise and assumes a high degree of test validity. This article discusses the merits of extra credit assignments, homework, and "pop" quizzes; outlines defensible grading procedures; and discusses common grading problems, such as using grades as weapons. (MLH)

Can direct conversion of used nitrogen to new feed and protein help feed the world?

PubMed

Matassa, Silvio; Batstone, Damien J; Hülsen, Tim; Schnoor, Jerald; Verstraete, Willy

2015-05-05

The increase in the world population, vulnerability of conventional crop production to climate change, and population shifts to megacities justify a re-examination of current methods of converting reactive nitrogen to dinitrogen gas in sewage and waste treatment plants. Indeed, by up-grading treatment plants to factories in which the incoming materials are first deconstructed to units such as ammonia, carbon dioxide and clean minerals, one can implement a highly intensive and efficient microbial resynthesis process in which the used nitrogen is harvested as microbial protein (at efficiencies close to 100%). This can be used for animal feed and food purposes. The technology for recovery of reactive nitrogen as microbial protein is available but a change of mindset needs to be achieved to make such recovery acceptable.

Quality-enhanced In{sub 0.3}Ga{sub 0.7}As film grown on GaAs substrate with an ultrathin amorphous In{sub 0.6}Ga{sub 0.4}As buffer layer

DOE Office of Scientific and Technical Information (OSTI.GOV)

Gao, Fangliang; Li, Guoqiang, E-mail: msgli@scut.edu.cn

2014-01-27

Using low-temperature molecular beam epitaxy, amorphous In{sub 0.6}Ga{sub 0.4}As layers have been grown on GaAs substrates to act as buffer layers for the subsequent epitaxial growth of In{sub 0.3}Ga{sub 0.7}As films. It is revealed that the crystallinity of as-grown In{sub 0.3}Ga{sub 0.7}As films is strongly affected by the thickness of the large-mismatched amorphous In{sub 0.6}Ga{sub 0.4}As buffer layer. Given an optimized thickness of 2 nm, this amorphous In{sub 0.6}Ga{sub 0.4}As buffer layer can efficiently release the misfit strain between the In{sub 0.3}Ga{sub 0.7}As epi-layer and the GaAs substrate, trap the threading and misfit dislocations from propagating to the following In{sub 0.3}Ga{submore » 0.7}As epi-layer, and reduce the surface fluctuation of the as-grown In{sub 0.3}Ga{sub 0.7}As, leading to a high-quality In{sub 0.3}Ga{sub 0.7}As film with competitive crystallinity to that grown on GaAs substrate using compositionally graded In{sub x}Ga{sub 1-x}As metamorphic buffer layers. Considering the complexity of the application of the conventional In{sub x}Ga{sub 1-x}As graded buffer layers, this work demonstrates a much simpler approach to achieve high-quality In{sub 0.3}Ga{sub 0.7}As film on GaAs substrate and, therefore, is of huge potential for the InGaAs-based high-efficiency photovoltaic industry.« less

Application and research of block caving in Pulang copper mine

NASA Astrophysics Data System (ADS)

Ge, Qifa; Fan, Wenlu; Zhu, Weigen; Chen, Xiaowei

2018-01-01

The application of block caving in mines shows significant advantages in large scale, low cost and high efficiency, thus block caving is worth promoting in the mines that meets the requirement of natural caving. Due to large scale of production and low ore grade in Pulang copper mine in China, comprehensive analysis and research were conducted on rock mechanics, mining sequence, undercutting and stability of bottom structure in terms of raising mine benefit and maximizing the recovery mineral resources. Finally this study summarizes that block caving is completely suitable for Pulang copper mine.

Comparison of cursive models for handwriting instruction.

PubMed

Karlsdottir, R

1997-12-01

The efficiency of four different cursive handwriting styles as model alphabets for handwriting instruction of primary school children was compared in a cross-sectional field experiment from Grade 3 to 6 in terms of the average handwriting speed developed by the children and the average rate of convergence of the children's handwriting to the style of their model. It was concluded that styles with regular entry stroke patterns give the steadiest rate of convergence to the model and styles with short ascenders and descenders and strokes with not too high curvatures give the highest handwriting speed.

Karyometry detects subvisual differences in chromatin organization state between cribriform and flat high-grade prostatic intraepithelial neoplasia.

PubMed

Montironi, Rodolfo; Thompson, Deborah; Scarpelli, Marina; Mazzucchelli, Roberta; Peketi, Prasanthi; Hamilton, Peter W; Bostwick, David G; Bartels, Peter H

2004-08-01

This digital texture analysis-based study evaluates the chromatin organization state in flat and cribriform high-grade prostatic intraepithelial neoplasia (PIN), in the adjacent normal looking secretory epithelium and in the co-occurring adenocarcinoma. Digital texture analysis (karyometry) was carried out on hematoxylin and eosin-stained sections from 24 radical prostatectomy specimens with high-grade PIN (12 with flat and 12 with cribriform architectural pattern, respectively) and cancer. Quantification was also conducted on the normal looking secretory epithelium. Discriminant analysis and the nonsupervised learning algorithm P-index were used to identify suitable subsets of features useful for the discrimination and classification of pathological groups and to explore multivariate data structure in the pathological subgroups. The average nuclear abnormality increases monotonically from the histologically normal appearing secretory epithelium to high-grade PIN and to adenocarcinoma. The nuclei from the so-called perimeter compartment of the flat high-grade PIN lesions show a higher nuclear abnormality compared to the nuclei of the cribriform high-grade PINs. Discriminant analysis shows that flat and cribriform high-grade PINs fall into two populations. Processing by the nonsupervised learning algorithm P-index revealed the existence of three well-defined, distinct subpopulations of nuclei of different chromatin phenotype. In the flat high-grade PIN lesions the proportions of nuclei in the three subpopulations are 16.5% (low abnormality), 25.0% (mid abnormality) and 58.5% (high abnormality), respectively. In the cribriform high-grade PIN lesions, 100% of the nuclei are in the mid-abnormality subpopulation. These differences are also discernible in the co-occurring adenocarcinoma and the histologically normal appearing secretory epithelium. To conclude, karyometry and statistical analysis detect the existence of distinct cell subpopulations of different chromatin packaging and phenotype, with the nuclei from the flat high-grade PIN lesions, adjacent normal looking epithelium and co-occurring adenocarcinoma expressing a greater nuclear abnormality than in the specimens with cribriform high-grade PIN.

Evidence for minimally invasive therapies in the management of chronic calcific tendinopathy of the rotator cuff: a systematic review and meta-analysis.

PubMed

Louwerens, Jan K G; Sierevelt, Inger N; van Noort, Arthur; van den Bekerom, Michel P J

2014-08-01

This meta-analysis assessed the short-term to midterm effectiveness of minimally invasive treatments in the management of calcifying tendinopathy of the shoulder cuff, a common source of chronic shoulder pain that leads to pain, a decreased active range of motion, and loss of muscular strength. When conservative therapies fail, minimally invasive treatment options can be considered before resulting to surgery. The Preferred Reporting Items for Systematic Reviews and Meta-Analyses (PRISMA) guidelines were followed to conduct this review. A systematic literature search was conducted in May 2013 to identify all studies that examined the short-term to midterm effectiveness of minimally invasive treatments for chronic calcifying tendinopathy. The primary end points were identified as function, pain, and total resorption rates. Grades of Recommendation Assessment, Development and Evaluation (GRADE) was used to assess the quality of evidence. Included were 20 studies (1544 participants). Common methodological flaws were related to randomization. In general, there is moderate-quality GRADE evidence that high-energy extracorporeal shockwave therapy has a significant effect on pain relief and functional status compared with other interventions. There is variable-quality GRADE evidence on the efficiency of other interventions. High-energy extracorporeal shockwave therapy is the most thoroughly investigated minimally invasive treatment option in the short-term to midterm and has proven to be a safe and effective treatment. Ultrasound-guided needling is safe but has not been proven to be more effective than an ultrasound-guided subacromial corticosteroid injection in recent level I research, and further research will have to prove its effectiveness. Copyright © 2014 Journal of Shoulder and Elbow Surgery Board of Trustees. Published by Mosby, Inc. All rights reserved.

Computational modeling of unsteady third-grade fluid flow over a vertical cylinder: A study of heat transfer visualization

NASA Astrophysics Data System (ADS)

Reddy, G. Janardhana; Hiremath, Ashwini; Kumar, Mahesh

2018-03-01

The present paper aims to investigate the effect of Prandtl number for unsteady third-grade fluid flow over a uniformly heated vertical cylinder using Bejan's heat function concept. The mathematical model of this problem is given by highly time-dependent non-linear coupled equations and are resolved by an efficient unconditionally stable implicit scheme. The time histories of average values of momentum and heat transport coefficients as well as the steady-state flow variables are displayed graphically for distinct values of non-dimensional control parameters arising in the system. As the non-dimensional parameter value gets amplified, the time taken for the fluid flow variables to attain the time-independent state is decreasing. The dimensionless heat function values are closely associated with an overall rate of heat transfer. Thermal energy transfer visualization implies that the heat function contours are compact in the neighborhood of the leading edge of the hot cylindrical wall. It is noticed that the deviations of flow-field variables from the hot wall for a non-Newtonian third-grade fluid flow are significant compared to the usual Newtonian fluid flow.

Gas release-based prescreening combined with reversed-phase HPLC quantitation for efficient selection of high-γ-aminobutyric acid (GABA)-producing lactic acid bacteria.

PubMed

Wu, Qinglong; Shah, Nagendra P

2015-02-01

High γ-aminobutyric acid (GABA)-producing lactobacilli are promising for the manufacture of GABA-rich foods and to synthesize GRAS (generally recognized as safe)-grade GABA. However, common chromatography-based screening is time-consuming and inefficient. In the present study, Korean kimchi was used as a model of lactic acid-based fermented foods, and a gas release-based prescreening of potential GABA producers was developed. The ability to produce GABA by potential GABA producers in de Man, Rogosa, and Sharpe medium supplemented with or without monosodium glutamate was further determined by HPLC. Based on the results, 9 isolates were regarded as high GABA producers, and were further genetically identified as Lactobacillus brevis based on the sequences of 16S rRNA gene. Gas release-based prescreening combined with reversed-phase HPLC confirmation was an efficient and cost-effective method to identify high-GABA-producing LAB, which could be good candidates for probiotics. The GABA that is naturally produced by these high-GABA-producing LAB could be used as a food additive. Copyright © 2015 American Dairy Science Association. Published by Elsevier Inc. All rights reserved.

Optimization of high grade glioma cell culture from surgical specimens for use in clinically relevant animal models and 3D immunochemistry.

PubMed

Hasselbach, Laura A; Irtenkauf, Susan M; Lemke, Nancy W; Nelson, Kevin K; Berezovsky, Artem D; Carlton, Enoch T; Transou, Andrea D; Mikkelsen, Tom; deCarvalho, Ana C

2014-01-07

Glioblastomas, the most common and aggressive form of astrocytoma, are refractory to therapy, and molecularly heterogeneous. The ability to establish cell cultures that preserve the genomic profile of the parental tumors, for use in patient specific in vitro and in vivo models, has the potential to revolutionize the preclinical development of new treatments for glioblastoma tailored to the molecular characteristics of each tumor. Starting with fresh high grade astrocytoma tumors dissociated into single cells, we use the neurosphere assay as an enrichment method for cells presenting cancer stem cell phenotype, including expression of neural stem cell markers, long term self-renewal in vitro, and the ability to form orthotopic xenograft tumors. This method has been previously proposed, and is now in use by several investigators. Based on our experience of dissociating and culturing 125 glioblastoma specimens, we arrived at the detailed protocol we present here, suitable for routine neurosphere culturing of high grade astrocytomas and large scale expansion of tumorigenic cells for preclinical studies. We report on the efficiency of successful long term cultures using this protocol and suggest affordable alternatives for culturing dissociated glioblastoma cells that fail to grow as neurospheres. We also describe in detail a protocol for preserving the neurospheres 3D architecture for immunohistochemistry. Cell cultures enriched in CSCs, capable of generating orthotopic xenograft models that preserve the molecular signatures and heterogeneity of GBMs, are becoming increasingly popular for the study of the biology of GBMs and for the improved design of preclinical testing of potential therapies.

Optimization of High Grade Glioma Cell Culture from Surgical Specimens for Use in Clinically Relevant Animal Models and 3D Immunochemistry

PubMed Central

Hasselbach, Laura A.; Irtenkauf, Susan M.; Lemke, Nancy W.; Nelson, Kevin K.; Berezovsky, Artem D.; Carlton, Enoch T.; Transou, Andrea D.; Mikkelsen, Tom; deCarvalho, Ana C.

2014-01-01

Glioblastomas, the most common and aggressive form of astrocytoma, are refractory to therapy, and molecularly heterogeneous. The ability to establish cell cultures that preserve the genomic profile of the parental tumors, for use in patient specific in vitro and in vivo models, has the potential to revolutionize the preclinical development of new treatments for glioblastoma tailored to the molecular characteristics of each tumor. Starting with fresh high grade astrocytoma tumors dissociated into single cells, we use the neurosphere assay as an enrichment method for cells presenting cancer stem cell phenotype, including expression of neural stem cell markers, long term self-renewal in vitro, and the ability to form orthotopic xenograft tumors. This method has been previously proposed, and is now in use by several investigators. Based on our experience of dissociating and culturing 125 glioblastoma specimens, we arrived at the detailed protocol we present here, suitable for routine neurosphere culturing of high grade astrocytomas and large scale expansion of tumorigenic cells for preclinical studies. We report on the efficiency of successful long term cultures using this protocol and suggest affordable alternatives for culturing dissociated glioblastoma cells that fail to grow as neurospheres. We also describe in detail a protocol for preserving the neurospheres 3D architecture for immunohistochemistry. Cell cultures enriched in CSCs, capable of generating orthotopic xenograft models that preserve the molecular signatures and heterogeneity of GBMs, are becoming increasingly popular for the study of the biology of GBMs and for the improved design of preclinical testing of potential therapies. PMID:24429465

Challenges for Wireless Mesh Networks to provide reliable carrier-grade services

NASA Astrophysics Data System (ADS)

von Hugo, D.; Bayer, N.

2011-08-01

Provision of mobile and wireless services today within a competitive environment and driven by a huge amount of steadily emerging new services and applications is both challenge and chance for radio network operators. Deployment and operation of an infrastructure for mobile and wireless broadband connectivity generally requires planning effort and large investments. A promising approach to reduce expenses for radio access networking is offered by Wireless Mesh Networks (WMNs). Here traditional dedicated backhaul connections to each access point are replaced by wireless multi-hop links between neighbouring access nodes and few gateways to the backbone employing standard radio technology. Such a solution provides at the same time high flexibility in both deployment and the amount of offered capacity and shall reduce overall expenses. On the other hand currently available mesh solutions do not provide carrier grade service quality and reliability and often fail to cope with high traffic load. EU project CARMEN (CARrier grade MEsh Networks) was initiated to incorporate different heterogeneous technologies and new protocols to allow for reliable transmission over "best effort" radio channels, to support a reliable mobility and network management, self-configuration and dynamic resource usage, and thus to offer a permanent or temporary broadband access at high cost efficiency. The contribution provides an overview on preliminary project results with focus on main technical challenges from a research and implementation point of view. Especially impact of mesh topology on the overall system performance in terms of throughput and connection reliability and aspects of a dedicated hybrid mobility management solution will be discussed.

A Comparative Study of the Academic Stress and Depression among High School Girl and Boy Students

ERIC Educational Resources Information Center

Khanehkeshi, Ali; Basavarajappa

2012-01-01

This paper compares the difference between boy and girl high school students of 1st grade to 3rd grade in academic stress and depression. Using a random stratified sampling 120 girl and boy students (60 girls and 60 boys) were selected from 1st grade (n = 40), 2nd grade (n = 40) and 3rd grade (n = 40) high school students. In this study gender and…

Looking Forward to High School and College: Middle Grade Indicators of Readiness in Chicago Public Schools

ERIC Educational Resources Information Center

Allensworth, Elaine M.; Gwynne, Julia A.; Moore, Paul; de la Torre, Marisa

2014-01-01

There is a very large population of students who struggle with the transition from the middle grades to high school, raising concerns that high school failures are partially a function of poor middle grade preparation. As a result, middle grade practitioners are grappling with questions about what skills students need to succeed in high school,…

Does Competition among Schools Encourage Grade Inflation?

ERIC Educational Resources Information Center

Walsh, Patrick

2010-01-01

This paper considers whether high schools in competitive environments use grade inflation to attract and retain families, perhaps in addition to more constructive responses. Two measures of grade inflation are used: the cutoffs used by each school to assign a letter grade to a percent score and high school grade point average after controlling for…

Banana peel reductant for leaching medium grade manganese ore in sulfuric acid solution

NASA Astrophysics Data System (ADS)

Aripin, H.; Joni, I. Made; Busaeri, Nundang; Usrah, Ifkar; Sudiana, I. Nyoman; Sabchevski, Svilen

2017-03-01

In this investigation, manganese has been produced from medium grade manganese ore from Karangnunggal mine (West Java, Indonesia). The effects of weighed amount of banana peels on the structural and leaching properties have been studied. The material's properties have been characterized on the basis of the experimental data obtained using X-ray fluorescence (XRF), X-ray diffraction (XRD), and Fourier transforms infrared (FTIR) spectroscopy. It has been found that an increase of the weighed amount of banana peels up to 4 g leads to an increase of the leaching efficiency of manganese from manganese ore. Above 4 g, however, the leaching efficiency does not change significantly. The analysis based on the interpretation of both XRD patterns and FTIR spectrum allows one to explain the increase in the leaching efficiencies of manganese by the reduction of MnO2 minerals and by the removal of hemicelluloses groups of banana peel in the samples.

Neurosurgical Skills Assessment: Measuring Technical Proficiency in Neurosurgery Residents Through Intraoperative Video Evaluations.

PubMed

Sarkiss, Christopher A; Philemond, Steven; Lee, James; Sobotka, Stanislaw; Holloway, Terrell D; Moore, Maximillian M; Costa, Anthony B; Gordon, Errol L; Bederson, Joshua B

2016-05-01

Although technical skills are fundamental in neurosurgery, there is little agreement on how to describe, measure, or compare skills among surgeons. The primary goal of this study was to develop a quantitative grading scale for technical surgical performance that distinguishes operator skill when graded by domain experts (residents, attendings, and nonsurgeons). Scores provided by raters should be highly reliable with respect to scores from other observers. Neurosurgery residents were fitted with a head-mounted video camera while performing craniotomies under attending supervision. Seven videos, 1 from each postgraduate year (PGY) level (1-7), were anonymized and scored by 16 attendings, 8 residents, and 7 nonsurgeons using a grading scale. Seven skills were graded: incision, efficiency of instrument use, cauterization, tissue handling, drilling/craniotomy, confidence, and training level. A strong correlation was found between skills score and PGY year (P < 0.001, analysis of variance). Junior residents (PGY 1-3) had significantly lower scores than did senior residents (PGY 4-7, P < 0.001, t test). Significant variation among junior residents was observed, and senior residents' scores were not significantly different from one another. Interrater reliability, measured against other observers, was high (r = 0.581 ± 0.245, Spearman), as was assessment of resident training level (r = 0.583 ± 0.278, Spearman). Both variables were strongly correlated (r = 0.90, Pearson). Attendings, residents, and nonsurgeons did not score differently (P = 0.46, analysis of variance). Technical skills of neurosurgery residents recorded during craniotomy can be measured with high interrater reliability. Surgeons and nonsurgeons alike readily distinguish different skill levels. This type of assessment could be used to coach residents, to track performance over time, and potentially to compare skill levels. Developing an objective tool to evaluate surgical performance would be useful in several areas of neurosurgery education. Copyright © 2016 Elsevier Inc. All rights reserved.

Energy Transformation: Teaching Youth about Energy Efficiency while Meeting Science Essential Standards

ERIC Educational Resources Information Center

Kirby, Sarah D.; Chilcote, Amy G.

2014-01-01

This article describes the Energy Transformation 4-H school enrichment curriculum. The curriculum addresses energy efficiency and conservation while meeting sixth-grade science essential standards requirements. Through experiential learning, including building and testing a model home, youth learn the relationship between various technologies and…

An Investigation of the Efficiency of Various Observational Procedures.

ERIC Educational Resources Information Center

Kissel, Mary Ann; Yeager, John L.

Several sampling procedures for collecting observational data on student activities were studied in an effort to determine their relative efficiency. The setting was a fifth grade Individually Prescribed Instruction (IPI) mathematics class of thirty-three pupils. A criterion measure was obtained by cumulating the measurements obtained on the…

Evaluation of Screening for Retinopathy of Prematurity by ROPtool or a Lay Reader.

PubMed

Abbey, Ashkan M; Besirli, Cagri G; Musch, David C; Andrews, Chris A; Capone, Antonio; Drenser, Kimberly A; Wallace, David K; Ostmo, Susan; Chiang, Michael; Lee, Paul P; Trese, Michael T

2016-02-01

To determine if (1) tortuosity assessment by a computer program (ROPtool, developed at the University of North Carolina, Chapel Hill, and Duke University, and licensed by FocusROP) that traces retinal blood vessels and (2) assessment by a lay reader are comparable with assessment by a panel of 3 retinopathy of prematurity (ROP) experts for remote clinical grading of vascular abnormalities such as plus disease. Validity and reliability analysis of diagnostic tools. Three hundred thirty-five fundus images of prematurely born infants. Three hundred thirty-five fundus images of prematurely born infants were obtained by neonatal intensive care unit nurses. A panel of 3 ROP experts graded 84 images showing vascular dilatation, tortuosity, or both and 251 images showing no evidence of vascular abnormalities. These images were sent electronically to an experienced lay reader who independently graded them for vascular abnormalities. The images also were analyzed using the ROPtool, which assigns a numerical value to the level of vascular abnormality and tortuosity present in each of 4 quadrants or sectors. The ROPtool measurements of vascular abnormalities were graded and compared with expert panel grades with a receiver operating characteristic (ROC) curve. Grades between human readers were cross-tabulated. The area under the ROC curve was calculated for the ROPtool, and sensitivity and specificity were computed for the lay reader. Measurements of vascular abnormalities by ROPtool and grading of vascular abnormalities by 3 ROP experts and 1 experienced lay reader. The ROC curve for ROPtool's tortuosity assessment had an area under the ROC curve of 0.917. Using a threshold value of 4.97 for the second most tortuous quadrant, ROPtool's sensitivity was 91% and its specificity was 82%. Lay reader sensitivity and specificity were 99% and 73%, respectively, and had high reliability (κ, 0.87) in repeated measurements. ROPtool had very good accuracy for detection of vascular abnormalities suggestive of plus disease when compared with expert physician graders. The lay reader's results showed excellent sensitivity and good specificity when compared with those of the expert graders. These options for remote reading of images to detect vascular abnormalities deserve consideration in the quest to use telemedicine with remote reading for efficient delivery of high-quality care and to detect infants requiring bedside examination. Copyright © 2016 American Academy of Ophthalmology. Published by Elsevier Inc. All rights reserved.

EMMPRIN expression positively correlates with WHO grades of astrocytomas and meningiomas.

PubMed

Tsai, Wen-Chiuan; Chen, Ying; Huang, Li-Chun; Lee, Herng-Sheng; Ma, Hsin-I; Huang, Shih-Ming; Sytwu, Huey-Kang; Hueng, Dueng-Yuan

2013-09-01

High-grade primary brain tumors possessed poor outcome due to invasiveness. Extracellular matrix metalloproteinase inducer (EMMPRIN) stimulates peri-tumoral fibroblasts to secrete matrix metalloproteinase and promote invasiveness. This study hypothesized that high-grade brain tumors overexpress EMMPRIN. Analyzing the public delinked database from the Gene Expression Omnibus profile, the results showed that the EMMPRIN mRNA level was higher in WHO grade IV (n = 81) than in grade III (n = 19, p < 0.0005) astrocytomas and non-tumor brain tissue controls (n = 23, p < 0.00001). The results of tissue microarray-based immunohistochemical (IHC) staining revealed that EMMPRIN levels positively correlated with WHO grades for astrocytomas (p = 0.008) and meningiomas (p = 0.048). EMMPRIN mRNA levels in conventional glioma cell lines (n = 36) was not less than those in glioma primary culture cells (n = 27) and glioblastoma stem-like cells (n = 12). The GBM8401, U87MG, and LN229 human glioma cell lines also overexpressed EMMPRIN. Hematoxylin and eosin, IHC, and immunofluorescence staining of xenografts confirmed that high-grade brain tumors overexpressed EMMPRIN. Lastly, Kaplan-Meier analysis revealed poorer survival in WHO grade IV (n = 56) than in grade III astrocytomas (n = 21, by log-rank test; p = 0.0001, 95 % CI: 1.842-3.053). However, in high-grade astrocytomas, there was no difference in survival between high and low EMMPRIN mRNA levels. Thus, this study identified that high-grade brain tumors overexpress EMMPRIN, which positively correlates with WHO grades in human astrocytomas and meningiomas, and suggests that EMMPRIN may be a therapeutic target of brain tumor.

Diffusion Profiling via a Histogram Approach Distinguishes Low-grade from High-grade Meningiomas, Can Reflect the Respective Proliferative Potential and Progesterone Receptor Status.

PubMed

Gihr, Georg Alexander; Horvath-Rizea, Diana; Garnov, Nikita; Kohlhof-Meinecke, Patricia; Ganslandt, Oliver; Henkes, Hans; Meyer, Hans Jonas; Hoffmann, Karl-Titus; Surov, Alexey; Schob, Stefan

2018-02-01

Presurgical grading, estimation of growth kinetics, and other prognostic factors are becoming increasingly important for selecting the best therapeutic approach for meningioma patients. Diffusion-weighted imaging (DWI) provides microstructural information and reflects tumor biology. A novel DWI approach, histogram profiling of apparent diffusion coefficient (ADC) volumes, provides more distinct information than conventional DWI. Therefore, our study investigated whether ADC histogram profiling distinguishes low-grade from high-grade lesions and reflects Ki-67 expression and progesterone receptor status. Pretreatment ADC volumes of 37 meningioma patients (28 low-grade, 9 high-grade) were used for histogram profiling. WHO grade, Ki-67 expression, and progesterone receptor status were evaluated. Comparative and correlative statistics investigating the association between histogram profiling and neuropathology were performed. The entire ADC profile (p10, p25, p75, p90, mean, median) was significantly lower in high-grade versus low-grade meningiomas. The lower percentiles, mean, and modus showed significant correlations with Ki-67 expression. Skewness and entropy of the ADC volumes were significantly associated with progesterone receptor status and Ki-67 expression. ROC analysis revealed entropy to be the most accurate parameter distinguishing low-grade from high-grade meningiomas. ADC histogram profiling provides a distinct set of parameters, which help differentiate low-grade versus high-grade meningiomas. Also, histogram metrics correlate significantly with histological surrogates of the respective proliferative potential. More specifically, entropy revealed to be the most promising imaging biomarker for presurgical grading. Both, entropy and skewness were significantly associated with progesterone receptor status and Ki-67 expression and therefore should be investigated further as predictors for prognostically relevant tumor biological features. Since absolute ADC values vary between MRI scanners of different vendors and field strengths, their use is more limited in the presurgical setting.

Roll Compaction and Tableting of High Loaded Metformin Formulations Using Efficient Binders.

PubMed

Arndt, Oscar-Rupert; Kleinebudde, Peter

2018-04-23

Metformin has a poor tabletability and flowability. Therefore, metformin is typically wet granulated with a binder before tableting. To save production costs, it would be desirable to implement a roll compaction/dry granulation (RCDG) process for metformin instead of using wet granulation. In order to implement RCDG, the efficiency of dry binders is crucial to ensure a high drug load and suitable properties of dry granules and tablets. This study evaluates dry granules manufactured by RCDG and subsequently tableting of high metformin content formulations (≥ 87.5%). Based on previous results, fine particle grades of hydroxypropylcellulose and copovidone in different fractions were compared as dry binders. The formulations are suitable for RCDG and tableting. Furthermore, results can be connected to in-die and out-of-die compressibility analysis. The addition of 7% of dry binder is a good compromise to generate sufficient mechanical properties on the one hand, but also to save resources and ensure a high metformin content on the other hand. Hydroxypropylcellulose was more efficient in terms of granule size, tensile strength and friability. Three percent croscarmellose was added to reach the specifications of the US Pharmacopeia regarding dissolution. The final formulation has a metformin content of 87.5%. A loss in tabletability does not occur for granules compressed at different specific compaction forces, which displays a robust tensile strength of tablets independent of the granulation process.

Performance of Hg1-xCdxTe infrared focal plane array at elevated temperature

NASA Astrophysics Data System (ADS)

Singh, Anand; Pal, Ravinder

2017-04-01

The simulated optical and electrical performance of the infrared HgCdTe focal plane array (FPA) for elevated operation temperature is reported. The depleted absorber layer is explored for equilibrium mode of operation up to 160 K. A resonant cavity is created to improve photon-matter interaction and hence, reduces the required absorption volume. The volume of the active region of HgCdTe detector is reduced by 70% in this manner. Dark current density is decreased without compromising the quantum efficiency. The effect of the reduced band filling effect leading to higher absorption coefficient and more efficient utilization of incident flux is employed. High quantum efficiency is achieved in a thin compositionally graded n+/ν/π/p HgCdTe photo-diode. This architecture helps to minimize the requirement of charge handling capacity in the CMOS read-out integrated circuit (ROIC) as the operation temperature is increased. Quantum efficiency ˜30% or above is shown to be sufficient for Noise Equivalent Temperature Difference (NETD) less than 20 mK with the reported design.

A Technical Description of the Procedures Used in Calculating School-Level Scaled Scores for the "Survey of Basic Skills: Grade 6."

ERIC Educational Resources Information Center

Mislevy, Robert J.; Bock, R. Darrell

New legislation in 1972 shifted the emphasis of the California Assessment Program (CAP) from traditional every pupil achievement testing to a more efficient multiple-matrix testing design, under which a broad spectrum of skills could be surveyed without undue expenditure of educational resources. Scale score reporting was introduced to the grade 6…

Analysis of endoscopic third ventriculostomy patency by MRI: value of different pulse sequences, the sequence parameters, and the imaging planes for investigation of flow void.

PubMed

Dinçer, Alp; Yildiz, Erdem; Kohan, Saeed; Memet Özek, M

2011-01-01

The aim of the study is to evaluate the efficiency of turbo spin-echo (TSE), three-dimensional constructive interference in the steady state (3D CISS) and cine phase contrast (Cine PC) sequences in determining flow through the endoscopic third ventriculostomy (ETV) fenestration, and to determine the effect of various TSE sequence parameters. The study was approved by our institutional review board and informed consent from all patients was obtained. Two groups of patients were included: group I (24 patients with good clinical outcome after ETV) and group II (22 patients with hydrocephalus evaluated preoperatively). The imaging protocol for both groups was identical. TSE T2 with various sequence parameters and imaging planes, and 3D CISS, followed by cine PC were obtained. Flow void was graded as four-point scales. The sensitivity, specificity, accuracy, positive and negative predictive values of sequences were calculated. Bidirectional flow through the fenestration was detected in all group I patients by cine PC. Stroke volumes through the fenestration in group I ranged 10-160.8 ml/min. There was no correlation between the presence of reversed flow and flow void grading. Also, there was no correlation between the stroke volumes and flow void grading. The sensitivity of 3D CISS was low, and 2 mm sagittal TSE T2, nearly equal to cine PC, provided best result. Cine PC and TSE T2 both have high confidence in the assessment of the flow through the fenestration. But, sequence parameters significantly affect the efficiency of TSE T2.

Chromosomal instability, telomere shortening, and inactivation of p21(WAF1/CIP1) in dysplastic nodules of hepatitis B virus-associated multistep hepatocarcinogenesis.

PubMed

Lee, Yoon Hee; Oh, Bong-Kyeong; Yoo, Jeong Eun; Yoon, So-Mi; Choi, Jinsub; Kim, Kyung Sik; Park, Young Nyun

2009-08-01

Systemic analysis for chromosomal instability and inactivation of cell cycle checkpoints are scarce during hepatocarcinogenesis. We studied 24 patients with chronic B viral cirrhosis including 30 cirrhotic regenerative nodules, 35 low-grade dysplastic nodules, 15 high-grade dysplastic nodules, 7 dysplastic nodules with hepatocellular carcinoma foci, and 18 hepatocellular carcinomas. Eight normal livers were studied as the control group. Telomere length and micronuclei were detected by Southern blot and Feulgen-fast green dyeing technique, respectively, and p21(WAF1/CIP1) expression was studied by immunohistochemistry. Micronuclei >1 per 3000 hepatocytes were found in 17% of low-grade dysplastic nodules, 87% of high-grade dysplastic nodules, and 100% of high-grade dysplastic nodules with hepatocellular carcinoma foci and hepatocellular carcinomas in contrast to those of all normal livers, and 90% of cirrhosis showed no micronuclei. The micronuclei index showed a gradual increase during hepatocarcinogenesis and there was a significant increase between cirrhosis and low-grade dysplastic nodules, low-grade dysplastic nodules and high-grade dysplastic nodules, and high-grade dysplastic nodules and hepatocellular carcinomas. Telomere length showed a gradual shortening during hepatocarcinogenesis and a significant reduction was found in high-grade dysplastic nodules (P=0.024) and hepatocellular carcinomas (P=0.031) compared with normal and cirrhotic livers. The micronuclei index was correlated with telomere shortening (P=0.016). The p21(WAF1/CIP1) labeling index was significantly higher in cirrhosis than in normal livers (P=0.024) and markedly decreased in low-grade dysplastic nodules, high-grade dysplastic nodules, and hepatocellular carcinomas compared with cirrhosis (P<0.05). The p21(WAF1/CIP1) labeling index was associated with telomere length (P<0.001) but not micronuclei index. This study shows that telomere shortening, chromosomal instability, and inactivation of p21(WAF1/CIP1) checkpoint function occur in low-grade dysplastic nodules as well as in high-grade dysplastic nodules, and their cooperation is considered to be critical for malignant transformation during hepatitis B virus associated-multistep hepatocarcinogenesis.

Jerusalem artichoke powder: a useful material in producing high-optical-purity l-lactate using an efficient sugar-utilizing thermophilic Bacillus coagulans strain.

PubMed

Wang, Limin; Xue, Zhangwei; Zhao, Bo; Yu, Bo; Xu, Ping; Ma, Yanhe

2013-02-01

Jerusalem artichoke is a low-requirement crop, which does not interfere with food chain, and is a promising carbon source for industrial fermentation. Microbial conversion of such a renewable raw material to useful products, such as lactic acid, is an important objective in industrial biotechnology. In this study, high-optical-purity l-lactate was efficiently produced from the hydrolysates of Jerusalem artichoke powder by a thermophilic bacterium, Bacillus coagulans XZL4. High l-lactate production (134gl(-1)) was obtained using 267gl(-1) Jerusalem artichoke powder (total reducing sugars of 140gl(-1)) and 10gl(-1) of corn steep powder in fed-batch fermentation, with an average productivity of 2.5gl(-1)h(-1) and a yield of 0.96gg(-1) reducing sugars. The final product optical purity is 99%, which meets the requirement of lactic acid polymerization. Our study represents a cost-effective and promising method for polymer-grade l-lactate production using a cheap raw bio-resource. Copyright © 2012 Elsevier Ltd. All rights reserved.

Multi-Physics Modeling of Molten Salt Transport in Solid Oxide Membrane (SOM) Electrolysis and Recycling of Magnesium

DOE Office of Scientific and Technical Information (OSTI.GOV)

Powell, Adam; Pati, Soobhankar

2012-03-11

Solid Oxide Membrane (SOM) Electrolysis is a new energy-efficient zero-emissions process for producing high-purity magnesium and high-purity oxygen directly from industrial-grade MgO. SOM Recycling combines SOM electrolysis with electrorefining, continuously and efficiently producing high-purity magnesium from low-purity partially oxidized scrap. In both processes, electrolysis and/or electrorefining take place in the crucible, where raw material is continuously fed into the molten salt electrolyte, producing magnesium vapor at the cathode and oxygen at the inert anode inside the SOM. This paper describes a three-dimensional multi-physics finite-element model of ionic current, fluid flow driven by argon bubbling and thermal buoyancy, and heat andmore » mass transport in the crucible. The model predicts the effects of stirring on the anode boundary layer and its time scale of formation, and the effect of natural convection at the outer wall. MOxST has developed this model as a tool for scale-up design of these closely-related processes.« less

Production of Magnesium and Aluminum-Magnesium Alloys from Recycled Secondary Aluminum Scrap Melts

NASA Astrophysics Data System (ADS)

Gesing, Adam J.; Das, Subodh K.; Loutfy, Raouf O.

2016-02-01

An experimental proof of concept was demonstrated for a patent-pending and trademark-pending RE12™ process for extracting a desired amount of Mg from recycled scrap secondary Al melts. Mg was extracted by electrorefining, producing a Mg product suitable as a Mg alloying hardener additive to primary-grade Al alloys. This efficient electrorefining process operates at high current efficiency, high Mg recovery and low energy consumption. The Mg electrorefining product can meet all the impurity specifications with subsequent melt treatment for removing alkali contaminants. All technical results obtained in the RE12™ project indicate that the electrorefining process for extraction of Mg from Al melt is technically feasible. A techno-economic analysis indicates high potential profitability for applications in Al foundry alloys as well as beverage—can and automotive—sheet alloys. The combination of technical feasibility and potential market profitability completes a successful proof of concept. This economical, environmentally-friendly and chlorine-free RE12™ process could be disruptive and transformational for the Mg production industry by enabling the recycling of 30,000 tonnes of primary-quality Mg annually.

Automated Segmentation of Nuclei in Breast Cancer Histopathology Images.

PubMed

Paramanandam, Maqlin; O'Byrne, Michael; Ghosh, Bidisha; Mammen, Joy John; Manipadam, Marie Therese; Thamburaj, Robinson; Pakrashi, Vikram

2016-01-01

The process of Nuclei detection in high-grade breast cancer images is quite challenging in the case of image processing techniques due to certain heterogeneous characteristics of cancer nuclei such as enlarged and irregularly shaped nuclei, highly coarse chromatin marginalized to the nuclei periphery and visible nucleoli. Recent reviews state that existing techniques show appreciable segmentation accuracy on breast histopathology images whose nuclei are dispersed and regular in texture and shape; however, typical cancer nuclei are often clustered and have irregular texture and shape properties. This paper proposes a novel segmentation algorithm for detecting individual nuclei from Hematoxylin and Eosin (H&E) stained breast histopathology images. This detection framework estimates a nuclei saliency map using tensor voting followed by boundary extraction of the nuclei on the saliency map using a Loopy Back Propagation (LBP) algorithm on a Markov Random Field (MRF). The method was tested on both whole-slide images and frames of breast cancer histopathology images. Experimental results demonstrate high segmentation performance with efficient precision, recall and dice-coefficient rates, upon testing high-grade breast cancer images containing several thousand nuclei. In addition to the optimal performance on the highly complex images presented in this paper, this method also gave appreciable results in comparison with two recently published methods-Wienert et al. (2012) and Veta et al. (2013), which were tested using their own datasets.

Automated Segmentation of Nuclei in Breast Cancer Histopathology Images

PubMed Central

Paramanandam, Maqlin; O’Byrne, Michael; Ghosh, Bidisha; Mammen, Joy John; Manipadam, Marie Therese; Thamburaj, Robinson; Pakrashi, Vikram

2016-01-01

The process of Nuclei detection in high-grade breast cancer images is quite challenging in the case of image processing techniques due to certain heterogeneous characteristics of cancer nuclei such as enlarged and irregularly shaped nuclei, highly coarse chromatin marginalized to the nuclei periphery and visible nucleoli. Recent reviews state that existing techniques show appreciable segmentation accuracy on breast histopathology images whose nuclei are dispersed and regular in texture and shape; however, typical cancer nuclei are often clustered and have irregular texture and shape properties. This paper proposes a novel segmentation algorithm for detecting individual nuclei from Hematoxylin and Eosin (H&E) stained breast histopathology images. This detection framework estimates a nuclei saliency map using tensor voting followed by boundary extraction of the nuclei on the saliency map using a Loopy Back Propagation (LBP) algorithm on a Markov Random Field (MRF). The method was tested on both whole-slide images and frames of breast cancer histopathology images. Experimental results demonstrate high segmentation performance with efficient precision, recall and dice-coefficient rates, upon testing high-grade breast cancer images containing several thousand nuclei. In addition to the optimal performance on the highly complex images presented in this paper, this method also gave appreciable results in comparison with two recently published methods—Wienert et al. (2012) and Veta et al. (2013), which were tested using their own datasets. PMID:27649496

Tract-specific fractional anisotropy predicts cognitive outcome in a community sample of middle-aged participants with white matter lesions

PubMed Central

Soriano-Raya, Juan José; Miralbell, Júlia; López-Cancio, Elena; Bargalló, Núria; Arenillas, Juan Francisco; Barrios, Maite; Cáceres, Cynthia; Toran, Pere; Alzamora, Maite; Dávalos, Antoni; Mataró, Maria

2014-01-01

Cerebral white matter lesions (WMLs) have been consistently related to cognitive dysfunction but the role of white matter (WM) damage in cognitive impairment is not fully determined. Diffusion tensor imaging is a promising tool to explain impaired cognition related to WMLs. We investigated the separate association of high-grade periventricular hyperintensities (PVHs) and deep white matter hyperintensities (DWMHs) with fractional anisotropy (FA) in middle-aged individuals. We also assessed the predictive value to cognition of FA within specific WM tracts associated with high-grade WMLs. One hundred participants from the Barcelona-AsIA Neuropsychology Study were divided into groups based on low- and high-grade WMLs. Voxel-by-voxel FA were compared between groups, with separate analyses for high-grade PVHs and DWMHs. The mean FA within areas showing differences between groups was extracted in each tract for linear regression analyses. Participants with high-grade PVHs and participants with high-grade DWMHs showed lower FA in different areas of specific tracts. Areas showing decreased FA in high-grade DWMHs predicted lower cognition, whereas areas with decreased FA in high-grade PVHs did not. The predictive value to cognition of specific WM tracts supports the involvement of cortico-subcortical circuits in cognitive deficits only in DWMHs. PMID:24549185

Tract-specific fractional anisotropy predicts cognitive outcome in a community sample of middle-aged participants with white matter lesions.

PubMed

Soriano-Raya, Juan José; Miralbell, Júlia; López-Cancio, Elena; Bargalló, Núria; Arenillas, Juan Francisco; Barrios, Maite; Cáceres, Cynthia; Toran, Pere; Alzamora, Maite; Dávalos, Antoni; Mataró, Maria

2014-05-01

Cerebral white matter lesions (WMLs) have been consistently related to cognitive dysfunction but the role of white matter (WM) damage in cognitive impairment is not fully determined. Diffusion tensor imaging is a promising tool to explain impaired cognition related to WMLs. We investigated the separate association of high-grade periventricular hyperintensities (PVHs) and deep white matter hyperintensities (DWMHs) with fractional anisotropy (FA) in middle-aged individuals. We also assessed the predictive value to cognition of FA within specific WM tracts associated with high-grade WMLs. One hundred participants from the Barcelona-AsIA Neuropsychology Study were divided into groups based on low- and high-grade WMLs. Voxel-by-voxel FA were compared between groups, with separate analyses for high-grade PVHs and DWMHs. The mean FA within areas showing differences between groups was extracted in each tract for linear regression analyses. Participants with high-grade PVHs and participants with high-grade DWMHs showed lower FA in different areas of specific tracts. Areas showing decreased FA in high-grade DWMHs predicted lower cognition, whereas areas with decreased FA in high-grade PVHs did not. The predictive value to cognition of specific WM tracts supports the involvement of cortico-subcortical circuits in cognitive deficits only in DWMHs.

Tunable, Highly Stable Lasers for Coherent Lidar

NASA Technical Reports Server (NTRS)

Henderson, Sammy W.; Hale, Charley P.; EEpagnier, David M.

2006-01-01

Practical space-based coherent laser radar systems envisioned for global winds measurement must be very efficient and must contend with unique problems associated with the large platform velocities that the instruments experience in orbit. To compensate for these large platform-induced Doppler shifts in space-based applications, agile-frequency offset-locking of two single-frequency Doppler reference lasers was thoroughly investigated. Such techniques involve actively locking a frequency-agile master oscillator (MO) source to a comparatively static local oscillator (LO) laser, and effectively producing an offset between MO (the lidar slave oscillator seed source, typically) and heterodyne signal receiver LO that lowers the bandwidth of the receiver data-collection system and permits use of very high-quantum-efficiency, reasonably- low-bandwidth heterodyne photoreceiver detectors and circuits. Recent work on MO/LO offset locking has focused on increasing the offset locking range, improving the graded-InGaAs photoreceiver performance, and advancing the maturity of the offset locking electronics. A figure provides a schematic diagram of the offset-locking system.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Gu, Jing; Aguiar, Jeffery A.; Ferrere, Suzanne

Achieving solar-to-hydrogen efficiencies above 15% is key for the commercial success of photoelectrochemical water splitting devices. While tandem cells can reach those efficiencies, increasing the catalytic activity and long-term stability remains a significant challenge. We show that annealing a bilayer of amorphous titanium dioxide (TiO x) and molybdenum sulfide (MoS x) deposited onto GaInP 2 results in a photocathode with high catalytic activity (current density of 11 mA/cm -2 at 0 V vs. the reversible hydrogen electrode under 1 sun illumination) and stability (retention of 80% of initial photocurrent density over a 20 h durability test) for the hydrogen evolutionmore » reaction. Microscopy and spectroscopy reveal that annealing results in a graded MoS x/MoO x/TiO 2 layer that retains much of the high catalytic activity of amorphous MoS x but with stability similar to crystalline MoS 2. These findings demonstrate the potential of utilizing a hybridized, heterogeneous surface layer as a cost-effective catalytic and protective interface for solar hydrogen production.« less

Current recommendations for surveillance and surgery of intraductal papillary mucinous neoplasms may overlook some patients with cancer.

PubMed

Nguyen, Andrew H; Toste, Paul A; Farrell, James J; Clerkin, Barbara M; Williams, Jennifer; Muthusamy, V Raman; Watson, Rabindra R; Tomlinson, James S; Hines, O Joe; Reber, Howard A; Donahue, Timothy R

2015-02-01

The 2012 Sendai Criteria recommend that patients with 3 cm or larger branch duct intraductal papillary mucinous neoplasms (BD-IPMN) without any additional "worrisome features" or "high-risk stigmata" may undergo close observation. Furthermore, endoscopic ultrasound (EUS) is not recommended for BD-IPMN <2 cm. These changes have generated concern among physicians treating patients with pancreatic diseases. The purposes of this study were to (i) apply the new Sendai guidelines to our institution's surgically resected BD-IPMN and (ii) reevaluate cyst size cutoffs in identifying patients with lesions harboring high-grade dysplasia or invasive cancer. We retrospectively reviewed 150 patients at a university medical center with preoperatively diagnosed and pathologically confirmed IPMNs. Sixty-six patients had BD-IPMN. Pathologic grade was dichotomized into low-grade (low or intermediate grade dysplasia) or high-grade/invasive (high-grade dysplasia or invasive cancers). Fisher's exact test, chi-square test, student's t test, linear regression, and receiver operating characteristic (ROC) analyses were performed. The median BD-IPMN size on imaging was 2.4 cm (interquartile range 1.5-3.0). Fifty-one (77 %) low-grade and 15 (23 %) high-grade/invasive BD-IPMN were identified. ROC analysis demonstrated that cyst size on preoperative imaging is a reasonable predictor of grade with an area under the curve of 0.691. Two-thirds of high-grade/invasive BD-IPMN were <3 cm (n = 10). Compared to a cutoff of 3, 2 cm was associated with higher sensitivity (73.3 vs. 33.3 %) and negative predictive value (83.3 vs. 80 %, NPV) for high-grade/invasive BD-IPMN. Mural nodules on endoscopic ultrasound (EUS) or atypical cells on endoscopic ultrasound-fine needle aspiration (EUS-FNA) were identified in all cysts <2 and only 50 % of those <3 cm. Forty percent of cysts >3 cm were removed based on size alone. Our results suggest that "larger" size on noninvasive imaging can indicate high-grade/invasive cysts, and EUS-FNA may help identify "smaller" cysts with high-grade/invasive pathology.

Analysis on effects of energy efficiency regulations & standards for industrial boilers in China

NASA Astrophysics Data System (ADS)

Liu, Ren; Chen, Lili; Zhao, Yuejin; Liu, Meng

2017-11-01

The industrial boilers in China are featured by large quantity, wide distribution, high energy consumption and heavy environmental pollution, which are key problems faced by energy conservation and environmental protection in China. Meanwhile, industrial boilers are important equipment for national economy and people’s daily life, and energy conservation gets through all segments from type selection, purchase, installation and acceptance to fuel management, operation, maintenance and service. China began to implement such national mandatory standards and regulations for industrial boiler as GB24500-2009 The Minimum Allowable Values of Energy Efficiency and Energy Efficiency Grades of Industrial Boilers and TSG G002-2010 Supervision Regulation on Energy-Saving Technology for Boilers since 2009, which obviously promote the development of energy conservation of industrial boilers, but there are also some problems with the rapid development of technologies for energy conservation of industrial boilers. In this paper, the implementation of energy efficiency standards for industrial boilers in China and the significance are analyzed based on survey data, and some suggestions are proposed for the energy efficiency standards for industrial boilers. Support by Project 2015424050 of Special Fund for quality control Research in the Public Interest

Status and Analysis on Effects of Energy Efficiency Standards for Industrial Boilers in China

NASA Astrophysics Data System (ADS)

Liu, Ren; Chen, Lili; Liu, Meng; Ding, Qing; Zhao, Yuejin

2017-11-01

Energy conservation and environmental protection is the basic policy of China, and is an important part of ecological civilization construction. The industrial boilers in China are featured by large quantity, wide distribution, high energy consumption and heavy environmental pollution, which are key problems faced by energy conservation and environmental protection in China. Meanwhile, industrial boilers are important equipment for national economy and people’s daily life, and energy conservation gets through all segments from type selection, purchase, installation and acceptance to fuel management, operation, maintenance and service. China began to implement such national mandatory standards and regulations for industrial boiler as GB24500-2009 The Minimum Allowable Values of Energy Efficiency and Energy Efficiency Grades of Industrial Boilers and TSG G002-2010 Supervision Regulation on Energy-Saving Technology for Boilers since 2009, which obviously promote the development of energy conservation of industrial boilers, but there are also some problems with the rapid development of technologies for energy conservation of industrial boilers. In this paper, the implementation of energy efficiency standards for industrial boilers in China and the significance are analyzed based on survey data, and some suggestions are proposed for the energy efficiency standards for industrial boilers.

Gastric B-cell mucosa associated lymphoid tissue lymphoma: a clinicopathological study in 56 patients.

PubMed Central

Castrillo, J M; Montalban, C; Obeso, G; Piris, M A; Rivas, M C

1992-01-01

Clinico-pathological features of 56 patients with primary gastric lymphoma were evaluated retrospectively. All cases were regraded according to a classification of Isaacson et al into high grade and low grade B-cell mucosa associated lymphoid tissue lymphoma. A third group of mixed grade was recognised in 11 patients with low grade who also had occasional areas of high grade. Low grade and mixed grade patients had a 100% actuarial survival at 156 months, which was significantly better (p < 0.01) than that of 52% for patients with high grade disease. Different treatment methods--surgery, chemotherapy, or a combination of both--did not significantly affect survival. Low grade tumours occurred mainly in men with a history of several years, and who presented with non-specific gastric symptoms without remarkable exploratory or laboratory findings: most patients were in stage IE-IIE and achieved remission and cure. High grade can have a shorter history, systemic symptoms, abnormal exploratory and laboratory findings, gastric tumour masses, stage IV disease, and a worse outcome. The only significant prognostic factors for survival were the type of lymphoma and stage IV disease. These findings support the Isaacson classification system which separates two extreme groups of gastric lymphomas with different morphology, behaviour, and outcome. The presence of limited areas of high grade in a specimen showing low grade does not change the outcome but suggests that primary gastric lymphoma forms a continuum between these extreme types. PMID:1446850

Evidence supporting see-and-treat management of cervical intraepithelial neoplasia: a systematic review and meta-analysis.

PubMed

Ebisch, R M F; Rovers, M M; Bosgraaf, R P; van der Pluijm-Schouten, H W; Melchers, W J G; van den Akker, P A J; Massuger, L F A G; Bekkers, R L M

2016-01-01

Studies of see-and-treat management of cervical intraepithelial neoplasia (CIN) vary in their inclusion criteria, resulting in a broad range of overtreatment rates. To determine overtreatment rates in see-and-treat management of women referred for colposcopy because of suspected CIN, in order to define circumstances supporting see-and-treat management. MEDLINE, EMBASE, and the Cochrane Library were searched from inception up to 12 May 2014. Studies of see-and-treat management in women with a reported cervical smear result, colposcopic impression, and histology result were included. Methodological quality was assessed with the Newcastle-Ottawa scale. We used the inverse variance method for pooling incidences, and a random-effects model was used to account for heterogeneity between studies. Overtreatment was defined as treatment in patients with no CIN or CIN1. Thirteen studies (n = 4611) were included. The overall overtreatment rate in women with a high-grade cervical smear and a high-grade colposcopic impression was 11.6% (95% CI 7.8-15.3%). The overtreatment rate in women with a high-grade cervical smear and low-grade colposcopic impression was 29.3% (95% CI 16.7-41.9%), and in the case of a low-grade smear and high-grade colposcopic impression it was 46.4% (95% CI 15.7-77.1%). In women with a low-grade smear and low-grade colposcopic impression, the overtreatment rate was 72.9% (95% CI 68.1-77.7%). The pooled overtreatment rate in women with a high-grade smear and high-grade colposcopic impression is at least comparable with the two-step procedure, which supports the use of see-and-treat management in this subgroup of women. See-and-treat management is justified in the case of a high-grade smear and a high-grade colposcopic impression. © 2015 Royal College of Obstetricians and Gynaecologists.

Development and Validation of a Gas-Fired Residential Heat Pump Water Heater - Final Report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Michael Garrabrant; Roger Stout; Paul Glanville

2013-01-21

For gas-fired residential water heating, the U.S. and Canada is predominantly supplied by minimum efficiency storage water heaters with Energy Factors (EF) in the range of 0.59 to 0.62. Higher efficiency and higher cost ($700 - $2,000) options serve about 15% of the market, but still have EFs below 1.0, ranging from 0.65 to 0.95. To develop a new class of water heating products that exceeds the traditional limit of thermal efficiency, the project team designed and demonstrated a packaged water heater driven by a gas-fired ammonia-water absorption heat pump. This gas-fired heat pump water heater can achieve EFs ofmore » 1.3 or higher, at a consumer cost of $2,000 or less. Led by Stone Mountain Technologies Inc. (SMTI), with support from A.O. Smith, the Gas Technology Institute (GTI), and Georgia Tech, the cross-functional team completed research and development tasks including cycle modeling, breadboard evaluation of two cycles and two heat exchanger classes, heat pump/storage tank integration, compact solution pump development, combustion system specification, and evaluation of packaged prototype GHPWHs. The heat pump system extracts low grade heat from the ambient air and produces high grade heat suitable for heating water in a storage tank for domestic use. Product features that include conventional installation practices, standard footprint and reasonable economic payback, position the technology to gain significant market penetration, resulting in a large reduction of energy use and greenhouse gas emissions from domestic hot water production.« less

Use of an alpha-galactosidase gene as a food-grade selection marker for Streptococcus thermophilus.

PubMed

Labrie, S; Bart, C; Vadeboncoeur, C; Moineau, S

2005-07-01

The alpha-galactosidase gene (aga) of Lactococcus raffinolactis ATCC 43920 was previously shown to be an efficient food-grade selection marker in Lactococcus lactis and Pediococcus acidilactici but not in Streptococcus thermophilus. In this study, we demonstrated that the alpha-galactosidase of L. raffinolactis is thermolabile and inoperative at 42 degrees C, the optimal growth temperature of S. thermophilus. An in vitro assay indicated that the activity of this alpha-galactosidase at 42 degrees C was only 3% of that at 30 degrees C, whereas the enzyme retained 23% of its activity at 37 degrees C. Transformation of Strep. thermophilus RD733 with the shuttle-vector pNZ123 bearing the aga gene of L. raffinolactis (pRAF301) generated transformants that were stable and able to grow on melibiose and raffinose at 37 degrees C or below. The transformed cells possessed 6-fold more alpha-galactosidase activity after growth on melibiose than cells grown on lactose. Slot-blot analyses of aga mRNA indicated that repression by lactose occurred at the transcriptional level. The presence of pRAF301 did not interfere with the lactic acid production when the transformed cells of Strep. thermophilus were grown at the optimal temperature in milk. Using the recombinant plasmid pRAF301, which carries a chloramphenicol resistance gene in addition to aga, we showed that both markers were equally efficient at differentiating transformed from nontransformed cells. The aga gene of L. raffinolactis can be used as a highly efficient selection marker in Strep. thermophilus.

[Influence of contractual medical association on inpatient service performance].

PubMed

Wu, Zhi-jun; Jian, Wei-yan

2015-06-18

To study the influence of contractual medical association on inpatient service performance. The data came from "Database of Inpatient Record" administered by Department of Medical Insurance. Using diagnosis related groups (DRG) as the tool of risk-adjustment, the third-tier general hospitals and second-tier general hospitals in medical alliance as the intervention group, and the average level of the same grade local hospitals as the control group, the influence of medical alliance on inpatient service performance was evaluated. The difference in difference (DID) method was used for the data analysis. The assessing indicators included the number of DRG group, case mix index (CMI), the total weight, cost efficiency index and time efficiency index. After the establishment of medical association, compared with the average level of the same grade local hospitals, in the third-tier general hospitals of medical alliance, the growth rate of the total weight had declined, and cost efficiency index had increased, while in the second-tier general hospitals of medical alliance, the CMI value had declined, and the cost efficiency index had increased. Contractual medical association played a role of triage patients, and improved the service levels and management efficiency of the second-tier general hospitals.

The health care burden of high grade chronic obstructive pulmonary disease in Korea: analysis of the Korean Health Insurance Review and Assessment Service data.

PubMed

Kim, JinHee; Rhee, Chin Kook; Yoo, Kwang Ha; Kim, Young Sam; Lee, Sei Won; Park, Yong Bum; Lee, Jin Hwa; Oh, YeonMok; Lee, Sang Do; Kim, Yuri; Kim, KyungJoo; Yoon, HyoungKyu

2013-01-01

Patients with high grade chronic pulmonary obstructive disease (COPD) account for much of the COPD-related mortality and incur excessive financial burdens and medical care utilization. We aimed to determine the characteristics and medical care use of such patients using nationwide data from the Korean Health Insurance Review and Assessment Service in 2009. Patients with COPD were identified by searching with the International Classification of Diseases-10th Revision for those using medication. Patients with high grade COPD were selected based on their patterns of tertiary institute visits and medication use. The numbers of patients with high grade COPD increased rapidly in Korea during the study period, and they showed a high prevalence of comorbid disease. The total medical costs were over three times higher in patients with high grade COPD compared with those without it ($3,744 versus $1,183; P < 0.001). Medication costs comprised the largest portion of medical cost, but most impact came from hospitalization and exacerbation in both groups of patients. COPD grade and hospitalization in the previous year were the major factors affecting medical costs and days of utilizing health care resources. Patients with high grade COPD impose a high economic burden on the health care system in Korea. Prevention of progression to high grade COPD is important, both clinically and economically.

Arterial spin-labeling assessment of normalized vascular intratumoral signal intensity as a predictor of histologic grade of astrocytic neoplasms.

PubMed

Furtner, J; Schöpf, V; Schewzow, K; Kasprian, G; Weber, M; Woitek, R; Asenbaum, U; Preusser, M; Marosi, C; Hainfellner, J A; Widhalm, G; Wolfsberger, S; Prayer, D

2014-03-01

Pulsed arterial spin-labeling is a noninvasive MR imaging perfusion method performed with the use of water in the arterial blood as an endogenous contrast agent. The purpose of this study was to determine the inversion time with the largest difference in normalized intratumoral signal intensity between high-grade and low-grade astrocytomas. Thirty-three patients with gliomas, histologically classified as low-grade (n = 7) or high-grade astrocytomas (n = 26) according to the World Health Organization brain tumor classification, were included. A 3T MR scanner was used to perform pulsed arterial spin-labeling measurements at 8 different inversion times (370 ms, 614 ms, 864 ms, 1114 ms, 1364 ms, 1614 ms, 1864 ms, and 2114 ms). Normalized intratumoral signal intensity was calculated, which was defined by the signal intensity ratio of the tumor and the contralateral normal brain tissue for all fixed inversion times. A 3-way mixed ANOVA was used to reveal potential differences in the normalized vascular intratumoral signal intensity between high-grade and low-grade astrocytomas. The difference in normalized vascular intratumoral signal intensity between high-grade and low-grade astrocytomas obtained the most statistically significant results at 370 ms (P = .003, other P values ranged from .012-.955). The inversion time by which to differentiate high-grade and low-grade astrocytomas by use of normalized vascular intratumoral signal intensity was 370 ms in our study. The normalized vascular intratumoral signal intensity values at this inversion time mainly reflect the labeled intra-arterial blood bolus and therefore could be referred to as normalized vascular intratumoral signal intensity. Our data indicate that the use of normalized vascular intratumoral signal intensity values allows differentiation between low-grade and high-grade astrocytomas and thus may serve as a new, noninvasive marker for astrocytoma grading.

Enhanced power conversion efficiency in InGaN-based solar cells via graded composition multiple quantum wells.

PubMed

Tsai, Yu-Lin; Wang, Sheng-Wen; Huang, Jhih-Kai; Hsu, Lung-Hsing; Chiu, Ching-Hsueh; Lee, Po-Tsung; Yu, Peichen; Lin, Chien-Chung; Kuo, Hao-Chung

2015-11-30

This work demonstrates the enhanced power conversion efficiency (PCE) in InGaN/GaN multiple quantum well (MQWs) solar cells with gradually decreasing indium composition in quantum wells (GQWs) toward p-GaN as absorber. The GQW can improve the fill factor from 42% to 62% and enhance the short current density from 0.8 mA/cm² to 0.92 mA/cm², as compares to the typical MQW solar cells. As a result, the PCE is boosted from 0.63% to 1.11% under AM1.5G illumination. Based on simulation and experimental results, the enhanced PCE can be attributed to the improved carrier collection in GQW caused by the reduction of potential barriers and piezoelectric polarization induced fields near the p-GaN layer. The presented concept paves a way toward highly efficient InGaN-based solar cells and other GaN-related MQW devices.

Removal of natural hormones in dairy farm wastewater using reactive and sorptive materials.

PubMed

Cai, Kai; Phillips, Debra H; Elliott, Christopher T; Muller, Marc; Scippo, Marie-Louise; Connolly, Lisa

2013-09-01

The objective of this study was to examine the oestrogen and androgen hormone removal efficiency of reactive (Connelly zero-valent iron (ZVI), Gotthart Maier ZVI) and sorptive (AquaSorb 101 granular activated carbon (GAC) and OrganoLoc PM-100 organoclay (OC)) materials from HPLC grade water and constructed wetland system (CWS) treated dairy farm wastewater. Batch test studies were performed and hormone concentration analysis carried out using highly sensitive reporter gene assays (RGAs). The results showed that hormonal interaction with these materials is selective for individual classes of hormones. Connelly ZVI and AquaSorb 101 GAC were more efficient in removing testosterone (Te) than 17β-estradiol (E2) and showed faster removal rates of oestrogen and androgen than the other materials. Gotthart Maier ZVI was more efficient in removing E2 than Te. OrganoLoc PM-100 OC achieved the lowest final concentration of E2 equivalent (EEQ) and provided maximum removal of both oestrogens and androgens. Copyright © 2013 Elsevier B.V. All rights reserved.

Bidirectional Relations between Text Reading Prosody and Reading Comprehension in the Upper Primary School Grades: A Longitudinal Perspective

PubMed Central

Veenendaal, Nathalie J.; Groen, Margriet A.; Verhoeven, Ludo

2016-01-01

The purpose of this study was to examine the directionality of the relationship between text reading prosody and reading comprehension in the upper grades of primary school. We compared three theoretical possibilities: Two unidirectional relations from text reading prosody to reading comprehension and from reading comprehension to text reading prosody and a bidirectional relation between text reading prosody and reading comprehension. Further, we controlled for autoregressive effects and included decoding efficiency as a measure of general reading skill. Participants were 99 Dutch children, followed longitudinally, from fourth- to sixth-grade. Structural equation modeling showed that the bidirectional relation provided the best fitting model. In fifth-grade, text reading prosody was related to prior decoding and reading comprehension, whereas in sixth-grade, reading comprehension was related to prior text reading prosody. As such, the results suggest that the relation between text reading prosody and reading comprehension is reciprocal, but dependent on grade level. PMID:27667916

The role of haemorrhage and exudate detection in automated grading of diabetic retinopathy.

PubMed

Fleming, Alan D; Goatman, Keith A; Philip, Sam; Williams, Graeme J; Prescott, Gordon J; Scotland, Graham S; McNamee, Paul; Leese, Graham P; Wykes, William N; Sharp, Peter F; Olson, John A

2010-06-01

Automated grading has the potential to improve the efficiency of diabetic retinopathy screening services. While disease/no disease grading can be performed using only microaneurysm detection and image-quality assessment, automated recognition of other types of lesions may be advantageous. This study investigated whether inclusion of automated recognition of exudates and haemorrhages improves the detection of observable/referable diabetic retinopathy. Images from 1253 patients with observable/referable retinopathy and 6333 patients with non-referable retinopathy were obtained from three grading centres. All images were reference-graded, and automated disease/no disease assessments were made based on microaneurysm detection and combined microaneurysm, exudate and haemorrhage detection. Introduction of algorithms for exudates and haemorrhages resulted in a statistically significant increase in the sensitivity for detection of observable/referable retinopathy from 94.9% (95% CI 93.5 to 96.0) to 96.6% (95.4 to 97.4) without affecting manual grading workload. Automated detection of exudates and haemorrhages improved the detection of observable/referable retinopathy.

Low-grade serous ovarian cancer: A review.

PubMed

Kaldawy, Anis; Segev, Yakir; Lavie, Ofer; Auslender, Ron; Sopik, Victoria; Narod, Steven A

2016-11-01

Epithelial ovarian cancers can be divided into the more common, aggressive type II cancers and the less common, slow-growing type I cancers. Under this model, serous ovarian carcinomas can be subdivided into high-grade (type II) and low-grade (type I) tumours. The two-tier system for grading serous ovarian carcinomas is superior to more detailed grading systems in terms of predicting survival. Low-grade serous carcinomas typically present in young women and have a relatively good prognosis, despite being resistant to chemotherapy. Low-grade serous cancers have a high prevalence of KRAS and BRAF mutations, but a low prevalence of TP53 mutations (which are characteristic of high-grade serous cancers). Among women with low-grade serous ovarian cancer, the presence of a KRAS/BRAF mutation is a favorable prognostic factor. Studies of the mitogen-activated protein kinase (MAPK) inhibitor in low-grade serous ovarian cancer suggest that identifying MAPK mutations might eventually be useful in guiding treatment. Copyright © 2016 Elsevier Inc. All rights reserved.

Clinicopathological features of gastric mucosa associated lymphoid tissue (MALT) lymphomas: high grade transformation and comparison with diffuse large B cell lymphomas without MALT lymphoma features

PubMed Central

Yoshino, T.; Omonishi, K.; Kobayashi, K.; Mannami, T.; Okada, H.; Mizuno, M.; Yamadori, I.; Kondo, E.; Akagi, T.

2000-01-01

Aims—To investigate the clinicopathological differences among gastric low grade MALT lymphomas (low MALT), large B cell lymphomas with low grade components (secondary high grade MALT lymphomas, high MALT), and diffuse large B cell lymphomas without low grade features (primary high grade MALT lymphomas, DLL). Methods—Clinicopathological and morphological characters of 126 gastric lymphoma cases were studied: 82 cases of low MALT lymphoma including 40 that were surgically resected, 17 cases of high MALT lymphoma including 13 surgically resected, and 27 cases of DLL including 12 surgically resected. Results—Age ranges were as follows: low MALT lymphoma, 34 to 85 years (mean 59.9); high MALT lymphoma, 53 to 88 years (mean 68.5); DLL, 29 to 83 years (mean 62.3). The average age for low and high MALT lymphomas was significantly different (p < 0.05), but there were no differences in other comparisons. There was a female predominance of low MALT lymphoma patients (female to male ratio, 47/35), while for high MALT patients the ratio was almost even (8/9), and for DLL patients there was a male predominance (11/16). Examination of surgically resected material showed that MALT lymphomas had a wider distribution in the gastric wall than DLL. Conclusions—The findings suggest that at least some of the high grade gastric lymphomas, especially in patients younger than the fifth decade, do not originate from high grade transformation of low MALT lymphomas. It seems to take about one decade at least for high grade transformation of low MALT lymphomas. Key Words: MALT lymphoma • stomach • transformation PMID:10823136

Characterizing T-cell response in low-grade and high-grade vulval intraepithelial neoplasia, study of CD3, CD4 and CD8 expressions.

PubMed

Gul, Nahid; Ganesan, Raji; Luesley, David M

2004-07-01

The objective of our study was to compare immunocyte infiltrates in vulval epithelium from low-grade and high-grade vulval intraepithelial neoplasia (VIN) lesions to determine if difference in T-cell presence reflected the grade of VIN. Thirty-six vulval specimens were obtained from 24 patients who had previously undergone vulval biopsies for VIN, 14 high-grade diseases (VIN 3 with or without HPV) and 14 low-grade diseases (VIN 1 and VIN 2 with or without HPV). Eight samples of normal vulval tissue were selected from the excision margins of resected vulval biopsies. The lymphocyte surface markers included CD3 (Pan T-cell marker), CD4 (T helper cells), and CD8 (T cytotoxic cells). Each tissue section was visualized under high power magnification and cells were counted in 10 random areas at the dermo-epidermal junction. A significantly higher number of total mean T lymphocytes were detected in VIN specimens compared to normal vulval tissue (P = 0.002). In low-grade VIN, there were significantly more CD8 cells than CD4 when compared to high-grade VIN. This difference in CD4/CD8 ratio was significant (P = 0.001). This study suggests that increased CD8 response in VIN is a feature of low-grade disease and we speculate that this may be a protective mechanism. In high-grade disease, both CD4 cells and CD8 cells are equally present with preservation of normal CD4/CD8 ratio.

Effective use of e-grading in the dental simulation clinic.

PubMed

Morrow, Jay A; Pulido, M Teresa; Smith, P Bradford; McDaniel, Thomas F; Willcox, Austin B

2014-06-01

The purpose of this article is to describe the development and implementation of a grading software system, accessible from any platform, that engages today's generation of students and replaces paper grading. Set up at one U.S. dental school in an all-access, anytime (24/7) web-based program accessed through tablets, the software allows for a comparison between students' self-grading and instructor grading. This comparison facilitates student-faculty interaction, promoting discussion and student learning. The software can also be used for practical examination grading in which blinded grading between instructors is possible. The data gathered can produce descriptive reports students can draw upon to encourage self-learning and guided learning, propelling students to a better understanding of critical principles as they progress through multiple psychomotor skill sets. Other reports generated by the software allow for instructor calibration, exporting of grades directly into the university grading report system, and visual analysis of trends within each class. In a post-course survey, students (56 percent response rate) and faculty (79 percent response rate) agreed that the electronic grading was more efficient and allowed more time for faculty-student interaction than the previous grading system, thus creating an environment more conducive to learning. Overall, the software has improved students' perception of enhanced kinetic skills, while facilitating administration of preclinical projects and practical examinations.

Fast and precise dense grid size measurement method based on coaxial dual optical imaging system

NASA Astrophysics Data System (ADS)

Guo, Jiping; Peng, Xiang; Yu, Jiping; Hao, Jian; Diao, Yan; Song, Tao; Li, Ameng; Lu, Xiaowei

2015-10-01

Test sieves with dense grid structure are widely used in many fields, accurate gird size calibration is rather critical for success of grading analysis and test sieving. But traditional calibration methods suffer from the disadvantages of low measurement efficiency and shortage of sampling number of grids which could lead to quality judgment risk. Here, a fast and precise test sieve inspection method is presented. Firstly, a coaxial imaging system with low and high optical magnification probe is designed to capture the grid images of the test sieve. Then, a scaling ratio between low and high magnification probes can be obtained by the corresponding grids in captured images. With this, all grid dimensions in low magnification image can be obtained by measuring few corresponding grids in high magnification image with high accuracy. Finally, by scanning the stage of the tri-axis platform of the measuring apparatus, whole surface of the test sieve can be quickly inspected. Experiment results show that the proposed method can measure the test sieves with higher efficiency compare to traditional methods, which can measure 0.15 million grids (gird size 0.1mm) within only 60 seconds, and it can measure grid size range from 20μm to 5mm precisely. In a word, the presented method can calibrate the grid size of test sieve automatically with high efficiency and accuracy. By which, surface evaluation based on statistical method can be effectively implemented, and the quality judgment will be more reasonable.

Experimental Determination of the HPGe Spectrometer Efficiency Calibration Curves for Various Sample Geometry for Gamma Energy from 50 keV to 2000 keV

NASA Astrophysics Data System (ADS)

Saat, Ahmad; Hamzah, Zaini; Yusop, Mohammad Fariz; Zainal, Muhd Amiruddin

2010-07-01

Detection efficiency of a gamma-ray spectrometry system is dependent upon among others, energy, sample and detector geometry, volume and density of the samples. In the present study the efficiency calibration curves of newly acquired (August 2008) HPGe gamma-ray spectrometry system was carried out for four sample container geometries, namely Marinelli beaker, disc, cylindrical beaker and vial, normally used for activity determination of gamma-ray from environmental samples. Calibration standards were prepared by using known amount of analytical grade uranium trioxide ore, homogenized in plain flour into the respective containers. The ore produces gamma-rays of energy ranging from 53 keV to 1001 keV. Analytical grade potassium chloride were prepared to determine detection efficiency of 1460 keV gamma-ray emitted by potassium isotope K-40. Plots of detection efficiency against gamma-ray energy for the four sample geometries were found to fit smoothly to a general form of ɛ = AΕa+BΕb, where ɛ is efficiency, Ε is energy in keV, A, B, a and b are constants that are dependent on the sample geometries. All calibration curves showed the presence of a "knee" at about 180 keV. Comparison between the four geometries showed that the efficiency of Marinelli beaker is higher than cylindrical beaker and vial, while cylindrical disk showed the lowest.

[Microsatellite instability and human papilloma virus genotypes in preneoplastic and neoplastic uterine cervix lesions].

PubMed

Roa S, Juan Carlos; Martínez S, Ricardo; Montenegro, Sonia; Roa E, Iván; Capurro V, Italo; Ibacache S, Gilda; Melo A, Angélica

2007-01-01

The association between some specific human papilloma virus (HPV) types and cervix cancer is well known. However, the genetic conditions that favor the development of cervical cancer are less well known. To determine the presence of satellite instability (MSI) in preneoplastic and neoplastic lesions of the cervix and correlate these findings with HPV genotypes. Biopsy samples of cervical lesions were studied. Sixteen had low grade lesions, 22 had high grade lesions and 28 had an epidermoid cancer. Viral types were identified with polymerase chain reaction, dot-blot hybridization and restriction fragment length polymorphism. MSI was determined using a panel of eight highly informative microsatellites. Microsatellite instability in at least one locus was observed in 91, 56 and 69% of low grade lesions, high grade lesions and epidermoid carcinomas, respectively. MSI-High grade, MSI-Low grade instability and microsatellite stability were observed in 5, 60 and 46% of samples, respectively. Two of three samples with high grade instability had HPV 52 genotype. Other viral subtypes had frequencies that ranged from 78% to 100%, with the exception of HPV16 that was present in only 53% of samples with low grade instability. Two thirds of biopsy samples from cervical lesions had MSI, mechanism that can be involved in the first stages of cervical carcinogenesis. The low frequency of high grade instability, its association with HPV52 and the low frequency of HPV16 in samples with low grade instability, suggest different coadjutant mechanisms in cervical carcinogenesis.

Low enhancement on multiphase contrast-enhanced CT images: an independent predictor of the presence of high tumor grade of clear cell renal cell carcinoma.

PubMed

Zhu, Ye-Hua; Wang, Xun; Zhang, Jin; Chen, Yong-Hui; Kong, Wen; Huang, Yi-Ran

2014-09-01

The purpose of this study was to assess the relation between tumor enhancement on multiphase contrast-enhanced CT images and Fuhrman grade of clear cell renal cell carcinoma. A single-institution retrospective review was conducted on the records of 255 patients who underwent radical or partial nephrectomy and received a histologic diagnosis of clear cell renal cell carcinoma. Two radiologists recorded the radiographic features of each patient, including the attenuation value of the lesion, lesion size, calcification within the lesion, cystic versus solid appearance, and margin regularity. Parameters representing the extent of tumor enhancement were defined and calculated. The association between tumor enhancement and Fuhrman grade was analyzed, and multivariate analysis was performed to find independent predictors of high tumor grade. Significant differences existed in tumor enhancement among different Fuhrman grades (p < 0.001). High-grade tumors had significantly lower enhancement (p < 0.001). The enhancement parameter had a sensitivity of 0.84 and specificity of 0.93 in prediction of high tumor grade. In the multivariate analysis, more advanced age, irregular margin, and low tumor enhancement were the three independent predictors of high tumor grade. Tumor enhancement of clear cell renal cell carcinoma on multiphase contrast-enhanced CT images is associated with Fuhrman grade. Low tumor enhancement in the corticomedullary phase is an independent predictor of high tumor grade. This system may be helpful in clinical decision making about the care of patients treated by nonsurgical approaches.

Finasteride Does Not Increase the Risk of High-grade Prostate Cancer: A Bias-adjusted Modeling Approach

PubMed Central

Redman, Mary W.; Tangen, Catherine M.; Goodman, Phyllis J.; Parnes, Howard; Ford, Leslie G.; Lucia, M. Scott; Coltman, Charles A.; Thompson, Ian M.

2010-01-01

The Prostate Cancer Prevention Trial found that seven years of administration of finasteride reduced the risk of prostate cancer by 25% but with an apparent increased risk of high grade disease. Subsequent analyses found that finasteride affects cancer detection and improves accuracy of tumor grading at biopsy. We herein estimate the impact of finasteride on the risk of overall and high grade prostate cancer, accounting for these biases. Study endpoints (biopsy-proven cancer or a 7-year end-of-study biopsy) were available in 10,182 of 15,990 subjects assessable for 7-year status and grading information from 500 subjects diagnosed with cancer who underwent radical prostatectomy. Prostate cancer was observed in 22.9% (4.8% with high grade) in the placebo group versus 16.6% (5.8% with high grade) in the finasteride group. In this bias-adjusted analysis, the estimated rates are 21.1% (4.2%) and 14.7% (4.8%), respectively, a 30% risk reduction in prostate cancer (RR =0.70 (95% confidence interval (CI) =0.64-0.76, p<0.0001) and a non-significant 14% increase in high grade cancer (RR=1.14 (95% CI = (0.96-1.35), p=0.12) with finasteride. Incorporating the prostatectomy data, estimated rates of high grade cancers are 8.2% (placebo) versus 6.0% (finasteride), a 27% risk reduction (RR = 0.73 (95% CI=0.56-0.96, p=0.02)) with finasteride. While the observed risk of high grade disease is greater with finasteride, this appears to be through facilitated diagnosis, primarily due to increased biopsy sensitivity. Men undergoing regular prostate cancer screening or who express an interest in cancer prevention should be informed of this prevention opportunity. PMID:19138953

Terahertz reflectometry imaging for low and high grade gliomas

NASA Astrophysics Data System (ADS)

Ji, Young Bin; Oh, Seung Jae; Kang, Seok-Gu; Heo, Jung; Kim, Sang-Hoon; Choi, Yuna; Song, Seungri; Son, Hye Young; Kim, Se Hoon; Lee, Ji Hyun; Haam, Seung Joo; Huh, Yong Min; Chang, Jong Hee; Joo, Chulmin; Suh, Jin-Suck

2016-10-01

Gross total resection (GTR) of glioma is critical for improving the survival rate of glioma patients. One of the greatest challenges for achieving GTR is the difficulty in discriminating low grade tumor or peritumor regions that have an intact blood brain barrier (BBB) from normal brain tissues and delineating glioma margins during surgery. Here we present a highly sensitive, label-free terahertz reflectometry imaging (TRI) that overcomes current key limitations for intraoperative detection of World Health Organization (WHO) grade II (low grade), and grade III and IV (high grade) gliomas. We demonstrate that TRI provides tumor discrimination and delineation of tumor margins in brain tissues with high sensitivity on the basis of Hematoxylin and eosin (H&E) stained image. TRI may help neurosurgeons to remove gliomas completely by providing visualization of tumor margins in WHO grade II, III, and IV gliomas without contrast agents, and hence, improve patient outcomes.

Quantitative evaluation of diffusion-kurtosis imaging for grading endometrial carcinoma: a comparative study with diffusion-weighted imaging.

PubMed

Chen, T; Li, Y; Lu, S-S; Zhang, Y-D; Wang, X-N; Luo, C-Y; Shi, H-B

2017-11-01

To evaluate the diagnostic performance of histogram analysis of diffusion kurtosis magnetic resonance imaging (DKI) and standard diffusion-weighted imaging (DWI) in discriminating tumour grades of endometrial carcinoma (EC). Seventy-three patients with EC were included in this study. The apparent diffusion coefficient (ADC) value from standard DWI, apparent diffusion for Gaussian distribution (D app ), and apparent kurtosis coefficient (K app ) from DKI were acquired using a 3 T magnetic resonance imaging (MRI) system. The measurement was based on an entire-tumour analysis. Histogram parameters (D app , K app , and ADC) were compared between high-grade (grade 3) and low-grade (grade 1 and 2) tumours. The diagnostic performance of imaging parameters for discriminating high- from low-grade tumours was analysed using a receiver operating characteristic curve (ROC). The area under the ROC curve (AUC) of the 10th percentile of D app , 90th percentile of K app and 10th percentile of ADC were higher than other parameters in distinguishing high-grade tumours from low-grade tumours (AUC=0.821, 0.891 and 0.801, respectively). The combination of 10th percentile of D app and 90th percentile of K app improved the AUC to 0.901, which was significantly higher than that of the 10th percentile of ADC (0.810, p=0.0314) in differentiating high- from low-grade EC. Entire-tumour volume histogram analysis of DKI and standard DWI were feasible for discriminating histological tumour grades of EC. DKI was relatively better than DWI in distinguishing high-grade from low-grade tumour in EC. Copyright © 2017. Published by Elsevier Ltd.

A neurogenic tumor containing a low-grade malignant peripheral nerve sheath tumor (MPNST) component with loss of p16 expression and homozygous deletion of CDKN2A/p16: a case report showing progression from a neurofibroma to a high-grade MPNST.

PubMed

Tajima, Shogo; Koda, Kenji

2015-01-01

Development of malignant peripheral nerve sheath tumors (MPNSTs) is a stepwise process that involves the alteration of many cell cycle regulators and the double inactivation of the NF1 gene. Inactivation of the TP53 gene and deletion of the CDKN2A/p16 gene are known to play an important role in the process. Herein, we present a 19-year-old man with a familial history of neurofibromatosis type 1, in whom the tumor arose from the intercostal nerve and showed 3 components: a neurofibroma, a low-grade MPNST, and a high-grade MPNST. Loss of p16 expression and homozygous deletion of the CDKN2A/p16 gene were observed in both the low-grade and the high-grade MPNST. In contrast to low-grade MPNSTs, high-grade MPNSTs generally tend to lose expression of p16 and harbor homozygous deletion of the CDKN2A/p16 gene. Loss of p16 expression and homozygous deletion of the CDKN2A/p16 gene in low-grade MPNST in our case might be related to its progression to high-grade MPNST. To the best of our knowledge, this is the first study correlating the p16 expression status and CDKN2A/p16 gene alteration in low-grade MPNSTs.

The Efficiency of Computer-Aided Instruction and Creative Drama on Academic Achievement in Teaching of Integers to Seventh Grade Students

ERIC Educational Resources Information Center

Kaplan, Abdullah; Özturk, Mesut; Ertör, Eren

2013-01-01

This study aims to compare computer-aided instruction, creative drama and traditional teaching methods in teaching of Integers to the seventh grade students. The study was conducted in a primary school with eighty-seven students (N=87) in a county of Agri, in spring term of academic year 2011-2012. A non equivalent control group quasi experimental…

The Effects of Student and Text Characteristics on the Oral Reading Fluency of Middle-Grade Students

PubMed Central

Barth, Amy E.; Tolar, Tammy D.; Fletcher, Jack M.; Francis, David

2014-01-01

We evaluated the effects of student characteristics (sight word reading efficiency, phonological decoding, verbal knowledge, level of reading ability, grade, gender) and text features (passage difficulty, length, genre, and language and discourse attributes) on the oral reading fluency of a sample of middle-school students in Grades 6–8 (N = 1,794). Students who were struggling (n = 704) and typically developing readers (n = 1,028) were randomly assigned to read five 1-min passages from each of 5 Lexile bands (within student range of 550 Lexiles). A series of multilevel analyses showed that student and text characteristics contributed uniquely to oral reading fluency rates. Student characteristics involving sight word reading efficiency and level of decoding ability accounted for more variability than reader type and verbal knowledge, with small, but statistically significant effects of grade and gender. The most significant text feature was passage difficulty level. Interactions involving student text characteristics, especially attributes involving overall ability level and difficulty of the text, were also apparent. These results support views of the development of oral reading fluency that involve interactions of student and text characteristics and highlight the importance of scaling for passage difficulty level in assessing individual differences in oral reading fluency. PMID:24567659

[High-grade pressure sores in frail older high-risk persons. A retrospective postmortem case-control-study].

PubMed

Von Renteln-Kruse, W; Krause, T; Anders, J; Kühl, M; Heinemann, A; Püschel, K

2004-04-01

Some old persons at risk do develop, but others, at comparable risk, do not develop high-grade pressure sores. To evaluate potentially different risk factors, we performed a post mortem case-control study in old persons who developed high-grade pressure sores within six months until 14 days before death. Consecutive cases with pressure sores grade >/=3 and potential controls at comparably high risk for pressure sores were examined before cremation. After written informed consent had been obtained by the next relatives, all available nursing and medical records of the deceased were thoroughly evaluated. Cases and controls were matched according to age, gender, immobility, and cachexia.A total of 100 cases with 71 pressure sores grade 3 and 29 pressure sores grade 4 were compared to 100 controls with 27 pressure sores grade

To nearly come full circle: Nonoperative management of high-grade IV-V blunt splenic trauma is safe using a protocol with routine angioembolization.

PubMed

Bhullar, Indermeet S; Tepas, Joseph J; Siragusa, Daniel; Loper, Todd; Kerwin, Andrew; Frykberg, Eric R

2017-04-01

Nonoperative management (NOM) of hemodynamically stable high-grade (IV-V) blunt splenic trauma remains controversial given the high failure rates (19%) that persist despite angioembolization (AE) protocols. The NOM protocol was modified in 2011 to include mandatory AE of all grade (IV-V) injuries without contrast blush (CB) along with selective AE of grade (I-V) with CB. The purpose of this study was to determine if this new AE (NAE) protocol significantly lowered the failure rates for grade (IV-V) injuries allowing for safe observation without surgery and if the exclusion of grade III injuries allowed for the prevention of unnecessary angiograms without affecting the overall failure rates. The records of patients with blunt splenic trauma from January 2000 to October 2014 at a Level I trauma center were retrospectively reviewed. Patients were divided into two groups and failure of NOM (FNOM) rates compared: NAE protocol (2011-2014) with mandatory AE for all grade (IV-V) injuries without CB and selective AE for grade (I-V) with CB versus old AE (OAE) protocol (2000-2010) with selective AE for grade (I-V) with CB. Seven hundred twelve patients underwent NOM with 522 (73%) in the OAE group and 190 (27%) in the NAE group. Evolving from the OAE to the NAE strategy resulted in a significantly lower FNOM rate for the overall group (grade I-V) (OAE vs. NAE, 4% to 1%, p = 0.04) and the grade (IV-V) group (OAE vs. NAE, 19% vs. 3%, p = 0.01). Angiograms were avoided in 113 grade (I-III) injuries with no CB; these patients had NOM with observation alone and none failed. A protocol using mandatory AE of all high-grade (IV-V) injuries without CB and selective AE of grade (I-V) with CB may provide for optimum salvage with safe NOM of the high-grade injuries (IV-V) and limited unnecessary angiograms. Therapeutic study, level IV.

Career Education Activities for Subject Area Teachers. Grades 9 through 12.

ERIC Educational Resources Information Center

Finn, Peter; Lawson, Jane

Designed as a resource book which can be used to supplement the regular curriculum by integrating one or more career education activities into regularly taught courses, this volume for grades 9 through 12 is one of a series of three manuals, one each for the elementary (grades 1-6), junior high (grades 6-9), and senior high (grades 9-12) levels.…

Career Education Activities for Subject Area Teachers. Grades 1 through 6.

ERIC Educational Resources Information Center

Lawson, Jane; Finn, Peter

Designed as a resource book which can be used to supplement the regular curriculum by integrating one or more career education activities into regularly taught courses, this volume for grades 1 through 6 is one of a series of three manuals, one each for the elementary (grades 1-6), junior high (grades 6-9), and senior high (grades 9-12) levels. It…

Career Education Activities for Subject Area Teachers. Grades 6 through 9.

ERIC Educational Resources Information Center

Finn, Peter; Lawson, Jane

Designed as a resource book which can be used to supplement the regular curriculum by integrating one or more career education activities into regularly taught courses, this volume for grades 6 through 9 is one of a series of three manuals, one each for the elementary (grades 1-6), junior high (grades 6-9), and senior high (grades 9-l2) levels. It…

Antithrombotic Therapy for VTE Disease

PubMed Central

Kearon, Clive; Comerota, Anthony J.; Prandoni, Paolo; Bounameaux, Henri; Goldhaber, Samuel Z.; Nelson, Michael E.; Wells, Philip S.; Gould, Michael K.; Dentali, Francesco; Crowther, Mark; Kahn, Susan R.

2012-01-01

Background: This article addresses the treatment of VTE disease. Methods: We generated strong (Grade 1) and weak (Grade 2) recommendations based on high-quality (Grade A), moderate-quality (Grade B), and low-quality (Grade C) evidence. Results: For acute DVT or pulmonary embolism (PE), we recommend initial parenteral anticoagulant therapy (Grade 1B) or anticoagulation with rivaroxaban. We suggest low-molecular-weight heparin (LMWH) or fondaparinux over IV unfractionated heparin (Grade 2C) or subcutaneous unfractionated heparin (Grade 2B). We suggest thrombolytic therapy for PE with hypotension (Grade 2C). For proximal DVT or PE, we recommend treatment of 3 months over shorter periods (Grade 1B). For a first proximal DVT or PE that is provoked by surgery or by a nonsurgical transient risk factor, we recommend 3 months of therapy (Grade 1B; Grade 2B if provoked by a nonsurgical risk factor and low or moderate bleeding risk); that is unprovoked, we suggest extended therapy if bleeding risk is low or moderate (Grade 2B) and recommend 3 months of therapy if bleeding risk is high (Grade 1B); and that is associated with active cancer, we recommend extended therapy (Grade 1B; Grade 2B if high bleeding risk) and suggest LMWH over vitamin K antagonists (Grade 2B). We suggest vitamin K antagonists or LMWH over dabigatran or rivaroxaban (Grade 2B). We suggest compression stockings to prevent the postthrombotic syndrome (Grade 2B). For extensive superficial vein thrombosis, we suggest prophylactic-dose fondaparinux or LMWH over no anticoagulation (Grade 2B), and suggest fondaparinux over LMWH (Grade 2C). Conclusion: Strong recommendations apply to most patients, whereas weak recommendations are sensitive to differences among patients, including their preferences. PMID:22315268

High-Grade Hydronephrosis Predicts Poor Outcomes After Radical Cystectomy in Patients with Bladder Cancer

PubMed Central

Kim, Dong Suk; Cho, Kang Su; Lee, Young Hoon; Cho, Nam Hoon; Oh, Young Taek

2010-01-01

We examined whether the presence and severity of preoperative hydronephrosis have prognostic significance in patients who underwent radical cystectomy for transitional cell carcinoma of the bladder. The medical records of 457 patients who underwent radical cystectomy for bladder cancer between 1986 and 2005 were retrospectively reviewed. Following the Society for Fetal Urology grading system, patients were divided into low-, and high-grade hydronephrosis groups. Clinicopathologic factors associated with preoperative hydronephrosis and survival were evaluated. Of a total of 406 patients, unilateral hydronephrosis was found in 74 (18.2%), bilateral hydronephrosis in 11 (2.7%), and no hydronephoris in 321 (79.1%). Low-grade hydronephrosis was found in 57 (12.2%) patients and high-grade hydronephrosis in 28 (6%). Preoperative hydronephrosis was related to higher pT stage and lymph node invasion. In univariate analysis, the presence of hydronephrosis, hydronephrosis grade, age, pT and pN stage, tumor grade, surgical margin, number of retrieved nodes, carcinoma in situ, and lymphovascular invasion were significant prognostic factors for cancer-specific survival. In multivariate analysis, bilateral hydronephrosis and high-grade hydronephrosis remained significant predictors for decreased survival. The presence of preoperative hydronephrosis, and high-grade hydronephrosis are significant prognostic factors in patients with bladder cancer after radical cystectomy. PMID:20191034

Propagation of sound in highly porous open-cell elastic foams

NASA Technical Reports Server (NTRS)

Lambert, R. F.

1983-01-01

This work presents both theoretical predictions and experimental measurements of attenuation and progressive phase constants of sound in open-cell, highly porous, elastic polyurethane foams. The foams are available commercially in graded pore sizes for which information about the static flow resistance, thermal time constant, volume porosity, dynamic structure factor, and speed of sound is known. The analysis is specialized to highly porous foams which can be efficient sound absorbers at audio frequencies. Negligible effect of internal wave coupling on attenuation and phase shift for the frequency range 16-6000 Hz was predicted and no experimentally significant effects were observed in the bulk samples studied. The agreement between predictions and measurements in bulk materials is excellent. The analysis is applicable to both the regular and compressed elastic open-cell foams.

The health care burden of high grade chronic obstructive pulmonary disease in Korea: analysis of the Korean Health Insurance Review and Assessment Service data

PubMed Central

Kim, JinHee; Rhee, Chin Kook; Yoo, Kwang Ha; Kim, Young Sam; Lee, Sei Won; Park, Yong Bum; Lee, Jin Hwa; Oh, YeonMok; Lee, Sang Do; Kim, Yuri; Kim, KyungJoo; Yoon, HyoungKyu

2013-01-01

Background Patients with high grade chronic pulmonary obstructive disease (COPD) account for much of the COPD-related mortality and incur excessive financial burdens and medical care utilization. We aimed to determine the characteristics and medical care use of such patients using nationwide data from the Korean Health Insurance Review and Assessment Service in 2009. Materials and methods Patients with COPD were identified by searching with the International Classification of Diseases–10th Revision for those using medication. Patients with high grade COPD were selected based on their patterns of tertiary institute visits and medication use. Results The numbers of patients with high grade COPD increased rapidly in Korea during the study period, and they showed a high prevalence of comorbid disease. The total medical costs were over three times higher in patients with high grade COPD compared with those without it ($3,744 versus $1,183; P < 0.001). Medication costs comprised the largest portion of medical cost, but most impact came from hospitalization and exacerbation in both groups of patients. COPD grade and hospitalization in the previous year were the major factors affecting medical costs and days of utilizing health care resources. Conclusion Patients with high grade COPD impose a high economic burden on the health care system in Korea. Prevention of progression to high grade COPD is important, both clinically and economically. PMID:24277985

Quantum dots-based double imaging combined with organic dye imaging to establish an automatic computerized method for cancer Ki67 measurement.

PubMed

Wang, Lin-Wei; Qu, Ai-Ping; Liu, Wen-Lou; Chen, Jia-Mei; Yuan, Jing-Ping; Wu, Han; Li, Yan; Liu, Juan

2016-02-03

As a widely used proliferative marker, Ki67 has important impacts on cancer prognosis, especially for breast cancer (BC). However, variations in analytical practice make it difficult for pathologists to manually measure Ki67 index. This study is to establish quantum dots (QDs)-based double imaging of nuclear Ki67 as red signal by QDs-655, cytoplasmic cytokeratin (CK) as yellow signal by QDs-585, and organic dye imaging of cell nucleus as blue signal by 4',6-diamidino-2-phenylindole (DAPI), and to develop a computer-aided automatic method for Ki67 index measurement. The newly developed automatic computerized Ki67 measurement could efficiently recognize and count Ki67-positive cancer cell nuclei with red signals and cancer cell nuclei with blue signals within cancer cell cytoplasmic with yellow signals. Comparisons of computerized Ki67 index, visual Ki67 index, and marked Ki67 index for 30 patients of 90 images with Ki67 ≤ 10% (low grade), 10% < Ki67 < 50% (moderate grade), and Ki67 ≥ 50% (high grade) showed computerized Ki67 counting is better than visual Ki67 counting, especially for Ki67 low and moderate grades. Based on QDs-based double imaging and organic dye imaging on BC tissues, this study successfully developed an automatic computerized Ki67 counting method to measure Ki67 index.

Effects of sleep timing, sleep quality and sleep duration on school achievement in adolescents.

PubMed

Tonetti, Lorenzo; Fabbri, Marco; Filardi, Marco; Martoni, Monica; Natale, Vincenzo

2015-08-01

The aim of this study was to examine the effects of sleep timing, quality and duration on school achievement in adolescents. Thirty-six Italian students (mean age: 18.14 ± 0.49 years) attending their last year of high school participated in the study. They completed the Morningness-Eveningness Questionnaire for Children and Adolescents (MEQ-CA). This was used to determine their ideal sleep timing by computing the total score, with higher scores corresponding to a greater tendency toward morningness. In addition, students underwent two non-consecutive weeks of actigraphy in one-month period to objectively assess: habitual sleep timing through the midpoint of sleep (MS); habitual sleep quality through the parameter of sleep efficiency (SE); and habitual sleep duration through the parameter of total sleep time (TST). Participants also completed the Mini Sleep Questionnaire, which allowed us to assess perceived sleep quality, at the end of each actigraphic-recording week. School performance was assessed using the grades obtained by students in their school leaving exams taken at the end of the school year. A significant positive correlation was observed between SE and exam grades, as well as MEQ-CA scores and grades. Multiple regression analysis showed that only SE was significantly and positively related to the final grade. Examining objective and ecological measures, SE (indicator of sleep quality) had the strongest effect on school achievement in adolescents. Copyright © 2015 Elsevier B.V. All rights reserved.

Prevalence of sedentary behavior and its correlates among primary and secondary school students

PubMed Central

Ferreira, Rodrigo Wiltgen; Rombaldi, Airton José; Ricardo, Luiza Isnardi Cardoso; Hallal, Pedro Curi; Azevedo, Mario Renato

2016-01-01

Abstract Objective: To determine the students’ exposure to four different sedentary behavior (SB) indicators and their associations with gender, grade, age, economic status and physical activity level. Methods: A cross-sectional study was conducted in 2013. The SB was collected using the HELENA instrument, composed by screen time questions (TV, video games and internet) and sitting activities on school opposite shift. The cut point of ≥2h/day was used to categorize the outcome. The Poisson regression was used for associations between the outcome and the independent variables (95% significance level), controlling for confounding variables and the possible design effect. Results: The sample was composed by 8661 students. The overall prevalence of SB was 69.2% (CI95% 68.1–70.2) on weekdays, and 79.6% (CI95% 78.7–80.5) on weekends. Females were more associated with the outcome, except to electronic games. Advanced grades students were more involved in sitting tasks when compared to the early grades. Older students were more likely to surf on net for ≥2h/day. Higher economic level students were more likely to engage in video games and internet. Active individuals were less likely to engage in SB on weekdays. Conclusions: The prevalence of SB was high, mainly on weekends. The associations with sex, age, grade and physical activity level should be considered into elaboration of more efficient interventions on SB control. PMID:26826878

Grade Crossing Protection in High-Speed, High-Density, Passenger-Service Rail Corridors

DOT National Transportation Integrated Search

1973-01-01

The report is a preliminary examination of special aspects of grade crossing protection for operation of high-speed passenger trains in rail corridors for which complete grade separation is not possible. Overall system needs and constraints are indic...

Armodafinil in Reducing Cancer-Related Fatigue in Patients With High Grade Glioma | Division of Cancer Prevention

Cancer.gov

This randomized phase III trial studies armodafinil to see how well it works in reducing cancer-related fatigue in patients with high grade glioma. Armodafinil may help relieve fatigue in patients with high grade glioma. |

Coexisting High-grade Vulvar Intraepithelial Neoplasia (VIN) and Condyloma Acuminatum - Independent Lesions Due to Different HPV Types Occurring in Immunocompromised Patients

PubMed Central

Maniar, Kruti P.; Ronnett, Brigitte M.; Vang, Russell; Yemelyanova, Anna

2012-01-01

The majority of vulvar intraepithelial neoplasia (VIN) is high-grade and is related to high-risk human papillomavirus (HRHPV) (most commonly HPV16). It is considered to be the precursor of HRHPV-related vulvar squamous cell carcinoma. Vulvar condyloma acuminatum is low-risk HPV (LRHPV)-related (most commonly types 6 and 11) and has virtually no risk of neoplastic progression. While infection with multiple LR- and HRHPV types has been reported for cervical squamous intraepithelial lesions, coexisting vulvar condyloma and adjacent high-grade VIN have not been well characterized. Eleven cases of concurrent condyloma acuminatum and adjacent flat high-grade VIN and three cases of high-grade VIN with prominent condylomatous architecture were analyzed using immunohistochemical (IHC) analysis of p16 expression, in situ hybridization (ISH) for HPV detection (HPV6/11, HPV16, HPV 18, and HPV WS [types 6,11,16,18,31,33,35,45,51,52] probes), and HPV typing by PCR-based method (in select cases). All patients had underlying immunosuppressive conditions (human immunodeficiency virus infection or post-transplant therapy). Among the 11 cases of concurrent high-grade VIN and condyloma, the lesions were directly adjacent to one another in 5 cases (with 2 of these demonstrating an intimate admixture of lesions), and in 6 cases were found in separate tissue sections from the same specimen. Diffuse/strong p16 expression was seen in all high-grade VIN lesions, whereas patchy/weak staining was found in all condylomata. All condylomata contained HPV 6 or 11 as detected by ISH. All of the accompanying high-grade VIN lesions had HRHPV detected. Ten contained HPV 16 (9 by ISH, 1 by PCR), with the remaining case containing multiple HPV types by PCR. All condylomatous high-grade VIN lesions demonstrated diffuse/strong p16 expression and had evidence of HRHPV (one with HPV 16 by ISH, one with HPV 18 by ISH, and one with multiple HPV types by PCR), with no detection of HPV 6 or 11 by ISH. The restriction of LRHPV to condylomatous components and HRHPV to high-grade VIN components of adjacent lesions suggests these are independent lesions caused by different HPV types. Diffuse p16 expression can highlight small foci of high-grade VIN which may be overlooked in more abundant condylomatous tissue from immunosuppressed patients. The presence of only HRHPV in those VIN lesions with high-grade cytologic features but prominent condylomatous architecture supports their classification as forms of pure high-grade VIN and distinguishes them from condyloma acuminatum. PMID:23026935

Use of a 2-tier histologic grading system for canine cutaneous mast cell tumors on cytology specimens.

PubMed

Hergt, Franziska; von Bomhard, Wolf; Kent, Michael S; Hirschberger, Johannes

2016-09-01

Mast cell tumors (MCT) represent the most common malignant skin tumor in the dog. Diagnosis of an MCT can be achieved through cytologic examination of a fine-needle aspirate. However, the grade of the tumor is an important prognostic marker and currently requires histologic assessment. Recently a 2-tier histologic grading system based on nuclear features including number of mitoses, multinucleated cells, bizarre nuclei, and karyomegaly was proposed. The aim of this study was to assess if the cytomorphologic criteria proposed in the 2-tier histologic grading system are applicable to cytology specimens. A total of 141 MCT specimens reported as grade I, II, or III according to the Patnaik system with both histologic specimens and fine-needle aspirates available were histologically and cytologically reevaluated in a retrospective study. According to the 2-tier grading system, 38 cases were diagnosed histologically as high-grade and 103 as low-grade MCT. Cytologic grading resulted in 36 high-grade and 105 low-grade tumors. Agreement between histologic and cytologic grading based on the 2-tier grading system was achieved in 133 cases (sensitivity 86.8%, specificity 97.1%, kappa value 0.853), but 5 high-grade tumors on histology were classified as low-grade on cytology. Cytologic grading of MCT in the dog is helpful for initial assessment. However, the reliability of cytology using the 2-tier grading system is considered inadequate at this point. Prospective studies including clinical outcome should be pursued to further determine diagnostic accuracy of cytologic mast cell grading. © 2016 American Society for Veterinary Clinical Pathology.

Digital fundus image grading with the non-mydriatic Visucam(PRO NM) versus the FF450(plus) camera in diabetic retinopathy.

PubMed

Neubauer, Aljoscha S; Rothschuh, Antje; Ulbig, Michael W; Blum, Marcus

2008-03-01

Grading diabetic retinopathy in clinical trials is frequently based on 7-field stereo photography of the fundus in diagnostic mydriasis. In terms of image quality, the FF450(plus) camera (Carl Zeiss Meditec AG, Jena, Germany) defines a high-quality reference. The aim of the study was to investigate if the fully digital fundus camera Visucam(PRO NM) could serve as an alternative in clinical trials requiring 7-field stereo photography. A total of 128 eyes of diabetes patients were enrolled in the randomized, controlled, prospective trial. Seven-field stereo photography was performed with the Visucam(PRO NM) and the FF450(plus) camera, in random order, both in diagnostic mydriasis. The resulting 256 image sets from the two camera systems were graded for retinopathy levels and image quality (on a scale of 1-5); both were anonymized and blinded to the image source. On FF450(plus) stereoscopic imaging, 20% of the patients had no or mild diabetic retinopathy (ETDRS level < or = 20) and 29% had no macular oedema. No patient had to be excluded as a result of image quality. Retinopathy level did not influence the quality of grading or of images. Excellent overall correspondence was obtained between the two fundus cameras regarding retinopathy levels (kappa 0.87) and macular oedema (kappa 0.80). In diagnostic mydriasis the image quality of the Visucam was graded slightly as better than that of the FF450(plus) (2.20 versus 2.41; p < 0.001), especially for pupils < 7 mm in mydriasis. The non-mydriatic Visucam(PRO NM) offers good image quality and is suitable as a more cost-efficient and easy-to-operate camera for applications and clinical trials requiring 7-field stereo photography.

Performance of a high-resolution depth-encoding PET detector module using linearly-graded SiPM arrays

NASA Astrophysics Data System (ADS)

Du, Junwei; Bai, Xiaowei; Gola, Alberto; Acerbi, Fabio; Ferri, Alessandro; Piemonte, Claudio; Yang, Yongfeng; Cherry, Simon R.

2018-02-01

The goal of this study was to exploit the excellent spatial resolution characteristics of a position-sensitive silicon photomultiplier (SiPM) and develop a high-resolution depth-of-interaction (DOI) encoding positron emission tomography (PET) detector module. The detector consists of a 30  ×  30 array of 0.445  ×  0.445  ×  20 mm3 polished LYSO crystals coupled to two 15.5  ×  15.5 mm2 linearly-graded SiPM (LG-SiPM) arrays at both ends. The flood histograms show that all the crystals in the LYSO array can be resolved. The energy resolution, the coincidence timing resolution and the DOI resolution were 21.8  ±  5.8%, 1.23  ±  0.10 ns and 3.8  ±  1.2 mm, respectively, at a temperature of -10 °C and a bias voltage of 35.0 V. The performance did not degrade significantly for event rates of up to 130 000 counts s-1. This detector represents an attractive option for small-bore PET scanner designs that simultaneously emphasize high spatial resolution and high detection efficiency, important, for example, in preclinical imaging of the rodent brain with neuroreceptor ligands.

Contraction coupling efficiency of human first dorsal interosseous muscle.

PubMed

Jubrias, Sharon A; Vollestad, Nina K; Gronka, Rod K; Kushmerick, Martin J

2008-04-01

During working contractions, chemical energy in the form of ATP is converted to external work. The efficiency of this conversion, called 'contraction coupling efficiency', is calculated by the ratio of work output to energy input from ATP splitting. Experiments on isolated muscles and permeabilized fibres show the efficiency of this conversion has a wide range, 0.2-0.7. We measured the work output in contractions of a single human hand muscle in vivo and of the ATP cost of that work to calculate the contraction coupling efficiency of the muscle. Five subjects performed six bouts of rapid voluntary contractions every 1.5 s for 42 s (28 contractions, each with time to peak force < 150 ms). The bouts encompassed a 7-fold range of workloads. The ATP cost during work was quantified by measuring the extent of chemical changes within the muscle from (31)P magnetic resonance spectra. Contraction coupling efficiency was determined as the slope of paired measurements of work output and ATP cost at the five graded work loads. The results show that 0.68 of the chemical energy available from ATP splitting was converted to external work output. A plausible mechanism to account for this high value is a substantially lower efficiency for mitochondrial ATP synthesis. The method described here can be used to analyse changes in the overall efficiency determined from oxygen consumption during exercise that can occur in disease or with age, and to test the hypothesis that such changes are due to reduced contraction coupling efficiency.

Grades, Coursework, and Student Characteristics in High School Economics

ERIC Educational Resources Information Center

Rebeck, Ken; Walstad, William B.

2015-01-01

The authors use U.S. public and private high school transcripts to analyze grade distribution patterns in economics courses across student and school characteristics, and compare these grades to those earned in other selected high school courses. Results are reported for the 53 percent of 2009 high school graduates who took a basic economics…

Quantification of confocal fluorescence microscopy for the detection of cervical intraepithelial neoplasia.

PubMed

Sheikhzadeh, Fahime; Ward, Rabab K; Carraro, Anita; Chen, Zhao Yang; van Niekerk, Dirk; Miller, Dianne; Ehlen, Tom; MacAulay, Calum E; Follen, Michele; Lane, Pierre M; Guillaud, Martial

2015-10-24

Cervical cancer remains a major health problem, especially in developing countries. Colposcopic examination is used to detect high-grade lesions in patients with a history of abnormal pap smears. New technologies are needed to improve the sensitivity and specificity of this technique. We propose to test the potential of fluorescence confocal microscopy to identify high-grade lesions. We examined the quantification of ex vivo confocal fluorescence microscopy to differentiate among normal cervical tissue, low-grade Cervical Intraepithelial Neoplasia (CIN), and high-grade CIN. We sought to (1) quantify nuclear morphology and tissue architecture features by analyzing images of cervical biopsies; and (2) determine the accuracy of high-grade CIN detection via confocal microscopy relative to the accuracy of detection by colposcopic impression. Forty-six biopsies obtained from colposcopically normal and abnormal cervical sites were evaluated. Confocal images were acquired at different depths from the epithelial surface and histological images were analyzed using in-house software. The features calculated from the confocal images compared well with those features obtained from the histological images and histopathological reviews of the specimens (obtained by a gynecologic pathologist). The correlations between two of these features (the nuclear-cytoplasmic ratio and the average of three nearest Delaunay-neighbors distance) and the grade of dysplasia were higher than that of colposcopic impression. The sensitivity of detecting high-grade dysplasia by analysing images collected at the surface of the epithelium, and at 15 and 30 μm below the epithelial surface were respectively 100, 100, and 92 %. Quantitative analysis of confocal fluorescence images showed its capacity for discriminating high-grade CIN lesions vs. low-grade CIN lesions and normal tissues, at different depth of imaging. This approach could be used to help clinicians identify high-grade CIN in clinical settings.

Histogram analysis of T2*-based pharmacokinetic imaging in cerebral glioma grading.

PubMed

Liu, Hua-Shan; Chiang, Shih-Wei; Chung, Hsiao-Wen; Tsai, Ping-Huei; Hsu, Fei-Ting; Cho, Nai-Yu; Wang, Chao-Ying; Chou, Ming-Chung; Chen, Cheng-Yu

2018-03-01

To investigate the feasibility of histogram analysis of the T2*-based permeability parameter volume transfer constant (K trans ) for glioma grading and to explore the diagnostic performance of the histogram analysis of K trans and blood plasma volume (v p ). We recruited 31 and 11 patients with high- and low-grade gliomas, respectively. The histogram parameters of K trans and v p , derived from the first-pass pharmacokinetic modeling based on the T2* dynamic susceptibility-weighted contrast-enhanced perfusion-weighted magnetic resonance imaging (T2* DSC-PW-MRI) from the entire tumor volume, were evaluated for differentiating glioma grades. Histogram parameters of K trans and v p showed significant differences between high- and low-grade gliomas and exhibited significant correlations with tumor grades. The mean K trans derived from the T2* DSC-PW-MRI had the highest sensitivity and specificity for differentiating high-grade gliomas from low-grade gliomas compared with other histogram parameters of K trans and v p . Histogram analysis of T2*-based pharmacokinetic imaging is useful for cerebral glioma grading. The histogram parameters of the entire tumor K trans measurement can provide increased accuracy with additional information regarding microvascular permeability changes for identifying high-grade brain tumors. Copyright © 2017 Elsevier B.V. All rights reserved.

Rapid growth of mineral deposits at artificial seafloor hydrothermal vents

PubMed Central

Nozaki, Tatsuo; Ishibashi, Jun-Ichiro; Shimada, Kazuhiko; Nagase, Toshiro; Takaya, Yutaro; Kato, Yasuhiro; Kawagucci, Shinsuke; Watsuji, Tomoo; Shibuya, Takazo; Yamada, Ryoichi; Saruhashi, Tomokazu; Kyo, Masanori; Takai, Ken

2016-01-01

Seafloor massive sulphide deposits are potential resources for base and precious metals (Cu-Pb-Zn ± Ag ± Au), but difficulties in estimating precise reserves and assessing environmental impacts hinder exploration and commercial mining. Here, we report petrological and geochemical properties of sulphide chimneys less than 2 years old that formed where scientific boreholes vented hydrothermal fluids in the Iheya-North field, Okinawa Trough, in East China Sea. One of these infant chimneys, dominated by Cu-Pb-Zn-rich sulphide minerals, grew a height of 15 m within 25 months. Portions of infant chimneys are dominated by sulphate minerals. Some infant chimneys are sulphide-rich similar to high-grade Cu-Pb-Zn bodies on land, albeit with relatively low As and Sb concentrations. The high growth rate reaching the 15 m height within 25 months is attributed to the large hydrothermal vent more than 50 cm in diameter created by the borehole, which induced slow mixing with the ambient seawater and enhanced efficiency of sulphide deposition. These observations suggest the possibility of cultivating seafloor sulphide deposits and even controlling their growth and grades through manipulations of how to mix and quench hydrothermal fluids with the ambient seawater. PMID:26911272

Efficient Reformulation of the Thermoelastic Higher-order Theory for Fgms

NASA Technical Reports Server (NTRS)

Bansal, Yogesh; Pindera, Marek-Jerzy; Arnold, Steven M. (Technical Monitor)

2002-01-01

Functionally graded materials (FGMs) are characterized by spatially variable microstructures which are introduced to satisfy given performance requirements. The microstructural gradation gives rise to continuously or discretely changing material properties which complicate FGM analysis. Various techniques have been developed during the past several decades for analyzing traditional composites and many of these have been adapted for the analysis of FGMs. Most of the available techniques use the so-called uncoupled approach in order to analyze graded structures. These techniques ignore the effect of microstructural gradation by employing specific spatial material property variations that are either assumed or obtained by local homogenization. The higher-order theory for functionally graded materials (HOTFGM) is a coupled approach developed by Aboudi et al. (1999) which takes the effect of microstructural gradation into consideration and does not ignore the local-global interaction of the spatially variable inclusion phase(s). Despite its demonstrated utility, however, the original formulation of the higher-order theory is computationally intensive. Herein, an efficient reformulation of the original higher-order theory for two-dimensional elastic problems is developed and validated. The use of the local-global conductivity and local-global stiffness matrix approach is made in order to reduce the number of equations involved. In this approach, surface-averaged quantities are the primary variables which replace volume-averaged quantities employed in the original formulation. The reformulation decreases the size of the global conductivity and stiffness matrices by approximately sixty percent. Various thermal, mechanical, and combined thermomechanical problems are analyzed in order to validate the accuracy of the reformulated theory through comparison with analytical and finite-element solutions. The presented results illustrate the efficiency of the reformulation and its advantages in analyzing functionally graded materials.

RAPADAPTE for rapid guideline development: high-quality clinical guidelines can be rapidly developed with limited resources.

PubMed

Alper, Brian S; Tristan, Mario; Ramirez-Morera, Anggie; Vreugdenhil, Maria M T; Van Zuuren, Esther J; Fedorowicz, Zbys

2016-06-01

Guideline development is challenging, expensive and labor-intensive. A high-quality guideline with 90 recommendations for breast cancer treatment was developed within 6 months with limited resources in Costa Rica. We describe the experience and propose a process others can use and adapt.The ADAPTE method (using existing guidelines to minimize repeating work that has been done) was used but existing guidelines were not current. The method was extended to use databases that systematically identify, appraise and synthesize evidence for clinical application (DynaMed, EBM Guidelines) to provide current evidence searches and critical appraisal of evidence. The Grading of Recommendations Assessment, Development and Evaluation (GRADE) approach was used to rate the quality of evidence and the strength of recommendations. Draft recommendations with supporting evidence were provided to panel members for facilitated voting to target panel discussion to areas necessary for reaching consensus.Training panelists in guideline development methodology facilitated rapid consensus development. Extending 'guideline adaptation' to 'evidence database adaptation' was highly effective and efficient. Methods were created to simplify mapping DynaMed evidence ratings to GRADE ratings. Twelve steps are presented to facilitate rapid guideline development and enable further adaptation by others.This is a case report and the RAPADAPTE method was retrospectively derived. Prospective replication and validation will support advances for the guideline development community. If guideline development can be accelerated without compromising validity and relevance of the resulting recommendations this would greatly improve our ability to impact clinical care. © The Author 2016. Published by Oxford University Press in association with the International Society for Quality in Health Care; all rights reserved.

A cognitive perspective on Singaporean primary school pupils' use of reading strategies in learning to read in English.

PubMed

Zhang, Lawrence Jun; Gu, Peter Yongqi; Hu, Guangwei

2008-06-01

This study is conducted in Singapore, where learning to read in English is regarded as essential because it is offered as a First Language (L1) subject in the curriculum and is stipulated as the medium of instruction in the education system, and the mother tongues are offered as Second Language (L2) subjects, although the majority still learn English as an L2. The paper reports on the reading strategies used by Singaporean primary school pupils from a cognitive perspective, which is part of a larger study that aims to investigate these pupils' language learning strategies. The participants were 18 pupils from three neighbourhood primary schools, in grades Primary 4, 5 and 6. The data were collected from high- and low-proficiency pupils at each of the three grades in each school, who read two texts at each level. Grounded in an information-processing theory and based on successful experiences of scholars using think-aloud for data collection, we asked the pupils to read and report what they were thinking about while reading. The think-aloud protocols were recorded, transcribed verbatim, coded and analysed. The results suggest that participants' flexible and appropriate use of reading strategies varies according to language proficiency and grade level, with the high-proficiency group outperforming its lower-proficiency counterpart and the high-graders outnumbering the lower-graders in terms of the number of strategies that they used. These differences were also exemplified with qualitative findings from case studies. The use of reading strategies differs according to proficiency levels, and the quality of pupils' strategy-use patterns has more significant implications for understanding efficient reading among primary school pupils.

Production of liquid fuels out of plant biomass and refuse: Methods, cost, potential (in MIXED)

DOE Office of Scientific and Technical Information (OSTI.GOV)

Woick, B.; Friedrich, R.

1981-09-01

Different ways of producing biomass and its conversion into high grade fuel for vehicles are reviewed with particular reference to physical and geographical factors, pertaining in the Federal Republic of Germany (FRG). Even with the potentially small amount of biomass in the FRG, the fueling of diesel engines with rape oil or modified ethanol, which can be obtained from any cellulosic feedstock, seems to pose the fewest difficulties and promises greatest efficiency. However, the amount of fuel produced from biomass can probably only meet a very small percentage of the total amount required.

Full system engineering design and operation of an oxygen plant

NASA Technical Reports Server (NTRS)

Colvin, James; Schallhorn, Paul; Ramonhalli, Kumar

1992-01-01

The production of oxygen from the indigenous resources on Mars is described. After discussing briefly the project's background and the experimental system design, specific experimental results of the electrolytic cell are presented. At the heart of the oxygen production system is a tubular solid zirconia electrolyte cell that will electrochemically separate oxygen from a high-temperature stream of Coleman grade carbon dioxide. Experimental results are discussed and certain system efficiencies are defined. The parameters varied include (1) the cell operating temperature; (2) the carbon dioxide flow rate; and (3) the voltage applied across the cell. The results confirm our theoretical expectations.

[Experience of diagnosis and treatment of exogenous high-grade fever].

PubMed

Xiong, Xing-jiang; Wang, Jie

2011-06-01

There is a regular pattern in the diagnosis and treatment of exogenous high-grade fever, of which the key point is formula syndrome identification. Syndrome differentiation of the six channels is appropriate for not only exogenous cold but also various other conditions. The diagnosis and treatment of high-grade fever can also follow the law of syndrome differentiation of the six channels. The theory of epidemic febrile diseases stems from and elaborates on an understanding of exogenous febrile conditions, so many effective formulas used to treat epidemic febrile diseases also have great value in the treatment of high-grade fever. Deteriorated syndrome, which is central to this condition, is very commonly seen in cases of high-grade fever, the key therapeutic principle of which is established according to syndromes. Allowing analysis that does not rigidly adhere to either established modern diagnosis or traditional Chinese syndromes, prominent achievements could be made in treating high-grade fever by summarizing the regular presenting patterns in terms of the constitution and symptoms.

Efficient production of D-tagatose using a food-grade surface display system.

PubMed

Liu, Yi; Li, Sha; Xu, Hong; Wu, Lingtian; Xu, Zheng; Liu, Jing; Feng, Xiaohai

2014-07-16

D-tagatose, a functional sweetener, is commonly transformed from D-galactose by L-arabinose isomerase (L-AI). In this study, a novel type of biocatalyst, L-AI from Lactobacillus fermentum CGMCC2921 displayed on the spore surface of Bacillus subtilis 168, was developed for producing D-tagatose. The anchored L-AI, exhibiting the relatively high bioactivity, suggested that the surface display system using CotX as the anchoring protein was successfully constructed. The stability of the anchored L-AI was significantly improved. Specifically, the consolidation of thermal stability representing 87% of relative activity was retained even at 80 °C for 30 min, which remarkably favored the production of D-tagatose. Under the optimal conditions, the robust spores can convert 75% D-galactose (100 g/L) into D-tagatose after 24 h, and the conversion rate remained at 56% at the third cycle. Therefore, this biocatalysis system, which could express the target enzyme on the food-grade vector, was an alternative method for the value-added production of D-tagatose.

A Novel Method to Generate and Expand Clinical-Grade, Genetically Modified, Tumor-Infiltrating Lymphocytes

PubMed Central

Forget, Marie-Andrée; Tavera, René J.; Haymaker, Cara; Ramachandran, Renjith; Malu, Shuti; Zhang, Minying; Wardell, Seth; Fulbright, Orenthial J.; Toth, Chistopher Leroy; Gonzalez, Audrey M.; Thorsen, Shawne T.; Flores, Esteban; Wahl, Arely; Peng, Weiyi; Amaria, Rodabe N.; Hwu, Patrick; Bernatchez, Chantale

2017-01-01

Following the clinical success achieved with the first generation of adoptive cell therapy (ACT) utilizing in vitro expanded tumor-infiltrating lymphocytes (TILs), the second and third generations of TIL ACT are evolving toward the use of genetically modified TIL. TIL therapy generally involves the transfer of a high number of TIL, ranging from 109 to 1011 cells. One of the technical difficulties in genetically modifying TIL, using a retroviral vector, is the ability to achieve large expansion of transduced TIL, while keeping the technique suitable to a Good Manufacturing Practices (GMP) environment. Consequently, we developed and optimized a novel method for the efficient production of large numbers of GMP-grade, gene-modified TIL for the treatment of patients with ACT. The chemokine receptor CXCR2 was used as the gene of interest for methodology development. The optimized procedure is currently used in the production of gene-modified TIL for two clinical trials for the treatment of metastatic melanoma at MD Anderson Cancer Center. PMID:28824634

An Investigation on a Crystalline-Silicon Solar Cell with Black Silicon Layer at the Rear.

PubMed

Zhou, Zhi-Quan; Hu, Fei; Zhou, Wen-Jie; Chen, Hong-Yan; Ma, Lei; Zhang, Chi; Lu, Ming

2017-12-15

Crystalline-Si (c-Si) solar cell with black Si (b-Si) layer at the rear was studied in order to develop c-Si solar cell with sub-band gap photovoltaic response. The b-Si was made by chemical etching. The c-Si solar cell with b-Si at the rear was found to perform far better than that of similar structure but with no b-Si at the rear, with the efficiency being increased relatively by 27.7%. This finding was interesting as b-Si had a large specific surface area, which could cause high surface recombination and degradation of solar cell performance. A graded band gap was found to form at the rear of the c-Si solar cell with b-Si layer at the rear. This graded band gap tended to expel free electrons away from the rear, thus reducing the probability of electron-hole recombination at b-Si and improving the performance of c-Si solar cell.

Classification of high-grade spondylolistheses based on pelvic version and spine balance: possible rationale for reduction.

PubMed

Hresko, Michael T; Labelle, Hubert; Roussouly, Pierre; Berthonnaud, Eric

2007-09-15

Retrospective review of a radiographic database of high-grade spondylolisthesis patients in comparison with asymptomatic controls. To analyze the sagittal spinopelvic alignment in high-grade spondylolisthesis patients and identify subgroups that may require reduction to restore sagittal balance. High-grade spondylolisthesis is associated with an abnormally high pelvic incidence (PI); however, the spatial orientation of the pelvis, determined by sacral slope (SS) and pelvic tilt (PT), is not known. We hypothesized that sagittal spinal alignment would vary with the pelvic orientation. Digitized sagittal radiographs of 133 high-grade spondylolisthesis patients (mean age, 17 years) were measured to determined sagittal alignment. K-means cluster analysis identified 2 groups based on the PT and SS, which were compared by paired t test. Comparisons were made to asymptomatic controls matched for PI. High-grade spondylolisthesis patients had a mean PI of 78.9 degrees +/- 12.1 degrees . Cluster analysis identified a retroverted, unbalanced pelvis group with high PT (36.5 degrees +/- 8.0 degrees )/low SS (40.3 degrees +/- 9.0 degrees ) and a balanced pelvic group with low PT (mean 21.3 degrees +/- 8.2 degrees )/high SS (59.9 degrees +/- 11.2 degrees ). The retroverted pelvis group had significantly greater L5 incidence and lumbosacral angle with less thoracic kyphosis than the balanced pelvic group. A total of 83% of controls had a "balanced pelvis" based on the categorization by SS and PT. Analysis of sagittal alignment of high-grade spondylolisthesis patients revealed distinct groups termed "balanced" and "unbalanced" pelvis. The PT and SS were similar in controls and balanced pelvis patients. Unbalanced pelvis patients had a sagittal spinal alignment that differed from the balanced pelvis and control groups. Treatment strategies for high-grade spondylolisthesis should reflect the different mechanical strain on the spinopelvic junction in each group; reduction techniques might be considered in patients with an unbalanced pelvis high-grade spondylolisthesis.

Mitigation of infectious disease at school: targeted class closure vs school closure.

PubMed

Gemmetto, Valerio; Barrat, Alain; Cattuto, Ciro

2014-12-31

School environments are thought to play an important role in the community spread of infectious diseases such as influenza because of the high mixing rates of school children. The closure of schools has therefore been proposed as an efficient mitigation strategy. Such measures come however with high associated social and economic costs, making alternative, less disruptive interventions highly desirable. The recent availability of high-resolution contact network data from school environments provides an opportunity to design models of micro-interventions and compare the outcomes of alternative mitigation measures. We model mitigation measures that involve the targeted closure of school classes or grades based on readily available information such as the number of symptomatic infectious children in a class. We focus on the specific case of a primary school for which we have high-resolution data on the close-range interactions of children and teachers. We simulate the spread of an influenza-like illness in this population by using an SEIR model with asymptomatics, and compare the outcomes of different mitigation strategies. We find that targeted class closure affords strong mitigation effects: closing a class for a fixed period of time--equal to the sum of the average infectious and latent durations--whenever two infectious individuals are detected in that class decreases the attack rate by almost 70% and significantly decreases the probability of a severe outbreak. The closure of all classes of the same grade mitigates the spread almost as much as closing the whole school. Our model of targeted class closure strategies based on readily available information on symptomatic subjects and on limited information on mixing patterns, such as the grade structure of the school, shows that these strategies might be almost as effective as whole-school closure, at a much lower cost. This may inform public health policies for the management and mitigation of influenza-like outbreaks in the community.

Automated Processing of Dynamic Contrast-Enhanced MRI: Correlation of Advanced Pharmacokinetic Metrics with Tumor Grade in Pediatric Brain Tumors.

PubMed

Vajapeyam, S; Stamoulis, C; Ricci, K; Kieran, M; Poussaint, T Young

2017-01-01

Pharmacokinetic parameters from dynamic contrast-enhanced MR imaging have proved useful for differentiating brain tumor grades in adults. In this study, we retrospectively reviewed dynamic contrast-enhanced perfusion data from children with newly diagnosed brain tumors and analyzed the pharmacokinetic parameters correlating with tumor grade. Dynamic contrast-enhanced MR imaging data from 38 patients were analyzed by using commercially available software. Subjects were categorized into 2 groups based on pathologic analyses consisting of low-grade (World Health Organization I and II) and high-grade (World Health Organization III and IV) tumors. Pharmacokinetic parameters were compared between the 2 groups by using linear regression models. For parameters that were statistically distinct between the 2 groups, sensitivity and specificity were also estimated. Eighteen tumors were classified as low-grade, and 20, as high-grade. Transfer constant from the blood plasma into the extracellular extravascular space (K trans ), rate constant from extracellular extravascular space back into blood plasma (K ep ), and extracellular extravascular volume fraction (V e ) were all significantly correlated with tumor grade; high-grade tumors showed higher K trans , higher K ep , and lower V e . Although all 3 parameters had high specificity (range, 82%-100%), K ep had the highest specificity for both grades. Optimal sensitivity was achieved for V e , with a combined sensitivity of 76% (compared with 71% for K trans and K ep ). Pharmacokinetic parameters derived from dynamic contrast-enhanced MR imaging can effectively discriminate low- and high-grade pediatric brain tumors. © 2017 by American Journal of Neuroradiology.

Effects of a selective educational system on fatigue, sleep problems, daytime sleepiness, and depression among senior high school adolescents in Taiwan.

PubMed

Chen, Tien-Yu; Chou, Yu-Ching; Tzeng, Nian-Sheng; Chang, Hsin-An; Kuo, Shin-Chang; Pan, Pei-Yin; Yeh, Yi-Wei; Yeh, Chin-Bin; Mao, Wei-Chung

2015-01-01

The aim of the study reported here was to clarify the effects of academic pressure on fatigue, sleep problems, daytime sleepiness, and depression among senior high school adolescents in Taiwan. This cross-sectional study enrolled 757 senior high school adolescents who were classified into four groups: Grade 1 (n=261), Grade 2 (n=228), Grade 3T (n=199; Grade 3 students who had another college entrance test to take), and Grade 3S (n=69; Grade 3 students who had succeeded in their college application). Fatigue, sleep quality, daytime sleepiness, and depression were assessed using the Chinese version of the Multidimensional Fatigue Symptom Inventory - Short Form, Pittsburgh Sleep Quality Index-Taiwan Form, the Chinese version of the Epworth Sleepiness Scale, and the Chinese version of the Beck Depression Inventory(®)-II (BDI-II), respectively. Physical, emotional, and mental fatigue scores were all higher in higher-grade groups. The Grade 3T (test) students had the worst fatigue severity, and the Grade 3S (success) students had the least fatigue severity. More than half of the students (60.9%) went to bed after 12 am, and they had on average 6.0 hours of sleep per night. More than 30% of the students in Grade 2 (37.3%) and Grades 3T/S (30.2%/30.4%) possibly had daily sleepiness problems. The students in Grade 3T had the worst BDI-II score (13.27±9.24), and the Grade 3S students had a much lower BDI-II score (7.91±6.13). Relatively high proportions of fatigue, sleep problems, daytime sleepiness, and depression among senior high school adolescents were found in our study. The severities of fatigue, sleep problems, and depression were significantly diminished in the group under less academic stress (Grade 3S). Our findings may increase the understanding of the mental health of senior high school students under academic pressure in Taiwan. Further large sample size and population-based study should be done for better understanding about this topic.

Review of high-throughput techniques for detecting solid phase Transformation from material libraries produced by combinatorial methods

NASA Technical Reports Server (NTRS)

Lee, Jonathan A.

2005-01-01

High-throughput measurement techniques are reviewed for solid phase transformation from materials produced by combinatorial methods, which are highly efficient concepts to fabricate large variety of material libraries with different compositional gradients on a single wafer. Combinatorial methods hold high potential for reducing the time and costs associated with the development of new materials, as compared to time-consuming and labor-intensive conventional methods that test large batches of material, one- composition at a time. These high-throughput techniques can be automated to rapidly capture and analyze data, using the entire material library on a single wafer, thereby accelerating the pace of materials discovery and knowledge generation for solid phase transformations. The review covers experimental techniques that are applicable to inorganic materials such as shape memory alloys, graded materials, metal hydrides, ferric materials, semiconductors and industrial alloys.

Grading Rigor in Counselor Education: A Specifications Grading Framework

ERIC Educational Resources Information Center

Bonner, Matthew W.

2016-01-01

According to accreditation and professional bodies, evaluation and grading are a high priority in counselor education. Specifications grading, an evaluative tool, can be used to increase grading rigor. This article describes the components of specifications grading and applies the framework of specifications grading to a counseling theories course.

A Study of Ninth-Grade Transition Practices across the Commonwealth of Virginia

ERIC Educational Resources Information Center

Childress, Toni Leigh Pardue

2013-01-01

Concerns over the academic success of first-time ninth-grade students transitioning into the high school setting continue to stimulate substantial interest in identifying the various factors that cause the ninth-grade bottleneck. Extensive research shows that when ninth-grade students transition into the high school setting, students have a…

Does Competition among Schools Encourage Grade Inflation?

ERIC Educational Resources Information Center

Walsh, Patrick

2010-01-01

This paper considers whether high schools in competitive environments use grade inflation to attract and retain families, perhaps in addition to more constructive responses. Two measures of grade inflation are used: the cutoffs used by each school to assign a letter grade to a percent score; and high school GPA after controlling for test scores, a…

Diagnostic grade wireless ECG monitoring.

PubMed

Garudadri, Harinath; Chi, Yuejie; Baker, Steve; Majumdar, Somdeb; Baheti, Pawan K; Ballard, Dan

2011-01-01

In remote monitoring of Electrocardiogram (ECG), it is very important to ensure that the diagnostic integrity of signals is not compromised by sensing artifacts and channel errors. It is also important for the sensors to be extremely power efficient to enable wearable form factors and long battery life. We present an application of Compressive Sensing (CS) as an error mitigation scheme at the application layer for wearable, wireless sensors in diagnostic grade remote monitoring of ECG. In our previous work, we described an approach to mitigate errors due to packet losses by projecting ECG data to a random space and recovering a faithful representation using sparse reconstruction methods. Our contributions in this work are twofold. First, we present an efficient hardware implementation of random projection at the sensor. Second, we validate the diagnostic integrity of the reconstructed ECG after packet loss mitigation. We validate our approach on MIT and AHA databases comprising more than 250,000 normal and abnormal beats using EC57 protocols adopted by the Food and Drug Administration (FDA). We show that sensitivity and positive predictivity of a state-of-the-art ECG arrhythmia classifier is essentially invariant under CS based packet loss mitigation for both normal and abnormal beats even at high packet loss rates. In contrast, the performance degrades significantly in the absence of any error mitigation scheme, particularly for abnormal beats such as Ventricular Ectopic Beats (VEB).

In vitro analysis of protection of the enzyme bile salt hydrolase against enteric conditions by whey protein-gum arabic microencapsulation.

PubMed

Lambert, J M; Weinbreck, F; Kleerebezem, M

2008-09-24

The interest in efficient intestinal delivery of health-promoting substances is increasing. However, the delivery of vulnerable substances such as enzymes requires specific attention. The transit through the stomach, where the pH is very low, can be detrimental to the enzymatic activity of the protein to be delivered. Here, we describe the microencapsulation of the model enzyme bile salt hydrolase (Bsh) using whey protein-gum arabic microencapsulates for food-grade and targeted enzyme delivery in the proximal region of the small intestine. Furthermore, the efficacy of enteric coating microencapsulates for site-specific enzyme delivery was compared in vitro with living Lactobacillus plantarum WCFS1 bacteria that endogenously produce the Bsh enzyme. Microencapsulates allowed highly effective protection of the enzyme under gastric conditions. Moreover, Bsh release under intestinal conditions appeared to be very efficient, although in the presence of pancreatin, the Bsh activity decreased in time due to proteolytic degradation. In comparison, L. plantarum appeared to be capable to withstand gastric conditions as well as pancreatin challenge. Delivery using encapsulates and live bacteria each have different (dis)advantages that are discussed. In conclusion, live bacteria and food-grade microencapsulates provide alternatives for dedicated enteric delivery of specific enzymes, and the choice of enzyme to be delivered may determine which mode of delivery is most suitable.

Relationship between columnar cell changes and low-grade carcinoma in situ of the breast--a cytogenetic study.

PubMed

Go, Edna May L; Tsang, Julia Y S; Ni, Yun-Bi; Yu, Alex M; Mendoza, Paulo; Chan, Siu-Ki; Lam, Christopher C; Lui, Philip C; Tan, Puay-Hoon; Tse, Gary M

2012-11-01

Columnar cell lesions of the breast include columnar cell changes without atypia and columnar cell changes with atypia. The latter frequently coexist and share molecular changes with low-grade carcinoma in situ and invasive carcinoma, suggesting that columnar cell changes may be precursors to progression of low-grade advanced lesions. In this study, we assessed chromosomal aberrations at 16q, hallmark for low-grade lesions, in columnar cell changes with or without atypia and their adjacent carcinoma in situ by fluorescent in situ hybridization using 3 region-specific probes spanning the entire chromosomal arm. The results were correlated with the histomorphological features of the corresponding lesions. Forty-four percent of low-grade carcinoma in situ and 31% of high-grade carcinoma in situ were associated with columnar cell changes with atypia, suggesting a link between columnar cell changes with atypia and low-grade carcinoma in situ. For the genetic aberrations, heterozygous deletion of 16q was present in 56% of low-grade carcinoma in situ but only in 19% of high-grade carcinoma in situ. Conversely, aneuploidy was found mostly in high-grade carcinoma in situ (88%). Twenty percent of columnar cell changes with atypia but none of the columnar cell changes without atypia showed heterozygous deletion of 16q. Interestingly, the same changes in 16q were observed in the columnar cell changes and their associated low-grade carcinoma in situ lesions. These findings demonstrated a genetic commonality between columnar cell changes with atypia and low-grade carcinoma in situ and substantiated the precursor role of columnar cell changes with atypia for low-grade carcinoma in situ but not high-grade carcinoma in situ of the breast. Copyright © 2012 Elsevier Inc. All rights reserved.

Early Care and Education in the Golden State: Publicly Funded Programs Serving California's Preschool-Age Children

ERIC Educational Resources Information Center

Karoly, Lynn A.; Reardon, Elaine; Cho, Michelle

2007-01-01

To evaluate the adequacy and efficiency of preschool education, the RAND Corporation has undertaken the California Preschool Study to improve understanding of achievement gaps in the early elementary grades, the adequacy of preschool education currently given, and what efficiencies or additional resources might be brought to bear in early care and…

Effect of dietary taurine supplementation on growth, feed efficiency, and nutrient composition of juvenile sablefish (Anoplopoma fimbria)

USDA-ARS?s Scientific Manuscript database

Juvenile sablefish were fed a low taurine, basal feed with seven graded levels of supplemental taurine to determine taurine requirements for growth and feed efficiency. The basal feed was plant based, formulated primarily with soy and corn proteins with a minimal (9%) amount of fishmeal. The unsuppl...

Comparison of the Efficiency of Two Flashcard Drill Methods on Children's Reading Performance

ERIC Educational Resources Information Center

Joseph, Laurice; Eveleigh, Elisha; Konrad, Moira; Neef, Nancy; Volpe, Robert

2012-01-01

The purpose of this study was to extend prior flashcard drill and practice research by holding instructional time constant and allowing learning trials to vary. Specifically, the authors aimed to determine whether an incremental rehearsal method or a traditional drill and practice method was most efficient in helping 5 first-grade children read,…

Efficiency of Social Studies Integrated Character Education Program

ERIC Educational Resources Information Center

Katilmis, Ahmet; Eksi, Halil; Ozturk, Cemil

2011-01-01

In this research, it is aimed to find out (i) the efficiency of a character education program based on overt values of Turkish 7th grade social studies lesson, and (ii) its hidden effects on the academic success. This research employed a semi-experimental design with pre-test, post-test and control group For this research primarily character…

Container Management: A Necessary Strategy for Improved Efficiencies

DTIC Science & Technology

2013-03-01

and carrier-owned containers under the USTRANSCOM USC or other applicable contract.21 Re-organize mobile container assessment teams ( MCAT ) with...warrant officer or field grade officers in charge. The MCATs are a great concept, but when a team shows up with a young Captain or Lieutenant and a...and a master sergeant or sergeant major on the MCAT , they will be more effective and better supported. Plenty of quality field grade Logistics Corps

Bases of Classification of Geometric Concepts Used by Children of Varying Characteristics. Report from the Project on Situational Variables and Efficiency of Concept Learning. Part II.

ERIC Educational Resources Information Center

Wiviott, Suzanne Pasch

This document, Part II of a two-part study, is the summary chapter of a report which sought to ascertain the relationship of grade level, achievement level, sex, and method of presentation to the various bases by which children classify geometric concepts. Two tasks, administered consecutively to 96 subjects in grades five, eight, and eleven,…

The Efficiency of Cluster Method in Improving the Creative Writing Skill of 6th Grade Students of Primary School

ERIC Educational Resources Information Center

Sahbaz, Namik Kemal; Duran, Gozde

2011-01-01

The aim of this research is to search the effect of the cluster method on the creative writing skill of 6th grade students. In this paper, the students of 6-A, studying at Ulas Primary School in 2010-2011 academic year, were divided into two groups as experiment and control. Taking into consideration the various variants, pre-test and last-test…

An Investigation of the Generalizability of Medical School Grades.

PubMed

Kreiter, Clarence D; Ferguson, Kristi J

2016-01-01

Construct/Background: Medical school grades are currently unstandardized, and their level of reliability is unknown. This means their usefulness for reporting on student achievement is also not well documented. This study investigates grade reliability within 1 medical school. Generalizability analyses are conducted on grades awarded. Grades from didactic and clerkship-based courses were treated as 2 levels of a fixed facet within a univariate mixed model. Grades from within the 2 levels (didactic and clerkship) were also entered in a multivariate generalizability study. Grades from didactic courses were shown to produce a highly reliable mean score (G = .79) when averaged over as few as 5 courses. Although the universe score correlation between didactic and clerkship courses was high (r = .80), the clerkship courses required almost twice as many grades to reach a comparable level of reliability. When grades were converted to a Pass/Fail metric, almost all information contained in the grades was lost. Although it has been suggested that the imprecision of medical school grades precludes their use as a reliable indicator of student achievement, these results suggest otherwise. While it is true that a Pass/Fail system of grading provides very little information about a student's level of performance, a multi-tiered grading system was shown to be a highly reliable indicator of student achievement within the medical school. Although grades awarded during the first 2 didactic years appear to be more reliable than clerkship grades, both yield useful information about student performance within the medical college.

Discordance between Ureteroscopic Biopsy and Final Pathology for Upper Tract Urothelial Carcinoma.

PubMed

Margolin, Ezra J; Matulay, Justin T; Li, Gen; Meng, Xiaosong; Chao, Brian; Vijay, Varun; Silver, Hayley; Clinton, Timothy N; Krabbe, Laura-Maria; Woldu, Solomon L; Singla, Nirmish; Bagrodia, Aditya; Margulis, Vitaly; Huang, William C; Bjurlin, Marc A; Shah, Ojas; Anderson, Christopher B

2018-06-01

We evaluated the discordance between ureteroscopic biopsy and surgical pathology findings for grading and staging upper tract urothelial carcinoma. We also sought to establish preoperative predictors of aggressive tumors. We retrospectively reviewed the records of 314 patients who underwent ureteroscopic biopsy followed by surgical management of upper tract urothelial carcinoma from 2000 to 2016 at a total of 3 institutions. Our primary outcomes were muscle invasive (pT2 or greater) disease at surgical pathology and upgrading of clinical low grade tumors to pathological high grade. At biopsy 61% of the patients had clinical high grade tumors and 21% had subepithelial connective tissue invasion (cT1+). On final pathology 79% of the patients had pathological high grade tumors and 45% had stage pT2 or greater. On multivariate analysis advanced patient age, clinical high grade and cT1+ were independently associated with pT2 or greater. The combined presence of clinical high grade and cT1+ had 86% positive predictive value for muscle invasion while the combined absence of clinical high grade and cT1+ had 80% negative predictive value. The likelihood of missing invasion on biopsy in patients with muscle invasive disease was increased when biopsy fragments were limited to 1 mm or less. Of clinical low grade cases on biopsy 51% were upgraded at surgery. The presence of positive urine cytology was associated with an increased risk of upgrading but this was not statistically significant. Clinical high grade, cT1+ on biopsy and advanced patient age are independent risk factors for muscle invasive upper tract urothelial carcinoma. There is a significant risk of upgrading in patients with clinical low grade tumors on biopsy, especially when urine cytology is positive. The predictive value of biopsy can likely be improved by more extensive ureteroscopic sampling. Copyright © 2018 American Urological Association Education and Research, Inc. Published by Elsevier Inc. All rights reserved.

Advanced and amplified BOLD fluctuations in high-grade gliomas.

PubMed

Gupta, Lalit; Gupta, Rakesh K; Postma, Alida A; Sahoo, Prativa; Gupta, Pradeep K; Patir, Rana; Ahlawat, Sunita; Saha, Indrajit; Backes, Walter H

2018-06-01

Glioma grade along with patient's age and general health are used for treatment planning and prognosis. To characterize and quantify the spontaneous blood oxygen level-dependent (BOLD) fluctuations in gliomas using measures based on T2*-weighted signal time-series and to distinguish between high- and low-grade gliomas. Retrospective. Twenty-one patients with high-grade and 13 patients with low-grade gliomas confirmed on histology were investigated. Dynamic T2*-weighted (multislice single-shot echo-planar-imaging) magnetic resonance imaging (MRI) was performed on a 3T system with an 8-element receive-only head coil to measure the BOLD fluctuations. In addition, a dynamic T 1 -weighted (3D fast field echo) dynamic contrast-enhanced (DCE) perfusion scan was performed. Three BOLD measures were determined: the temporal shift (TS), amplitude of low frequency fluctuations (ALFF), and regional homogeneity (ReHo). DCE perfusion-based cerebral blood volume (CBV) and time-to-peak (TTP) maps were concurrently evaluated for comparison. An analysis-of-variance test was first used. When the test appeared significant, post-hoc analysis was performed using analysis-of-covariance with age as covariate. Logistic regression and receiver-operator characteristic curve analysis were also performed. TS was significantly advanced in high-grade gliomas compared to the contralateral cortex (P = 0.01) and low-grade gliomas (P = 0.009). In high-grade gliomas, ALFF and CBV were significantly higher than the contralateral cortex (P = 0.041 and P = 0.008, respectively) and low-grade gliomas (P = 0.036 and P = 0.01, respectively). ReHo and TTP did not show significant differences between high- and low-grade gliomas (P = 0.46 and P = 0.42, respectively). The area-under-curve was above 0.7 only for the TS, ALFF, and CBV measures. Advanced and amplified hemodynamic fluctuations manifest in high-grade gliomas, but not in low-grade gliomas, and can be assessed using BOLD measures. Preliminary results showed that quantification of spontaneous fluctuations has potential for hemodynamic characterization of gliomas and distinguishing between high- and low-grade gliomas. 4 Technical Efficacy: Stage 5 J. Magn. Reson. Imaging 2018;47:1616-1625. © 2017 International Society for Magnetic Resonance in Medicine.

Teachers' Grading Decision Making

ERIC Educational Resources Information Center

Isnawati, Ida; Saukah, Ali

2017-01-01

This study investigated teachers' grading decision making, focusing on their beliefs underlying their grading decision making, their grading practices and assessment types, and factors they considered in grading decision making. Two teachers from two junior high schools applying different curriculum policies in grade reporting in Indonesian…

Evaluation of anatomic and morphologic nomogram to predict malignant and high-grade disease in a cohort of patients with small renal masses.

PubMed

Bagrodia, Aditya; Harrow, Brian; Liu, Zhuo-Wei; Olweny, Ephrem O; Faddegon, Stephen; Yin, Gang; Tan, Yung Khan; Han, Woong Kyu; Lotan, Yair; Margulis, Vitaly; Cadeddu, Jeffrey A

2014-01-01

To evaluate a nomogram using the RENAL Nephrometry Score (RENAL-NS) that was developed to characterize masses as benign vs. malignant and high vs. low grade in our patients with small renal masses treated with partial nephrectomy (PN). The nomogram was previously developed and validated in patients with widely variable tumor sizes. Retrospective review of PN performed between 1/2003 and 7/2011. Imaging was reviewed by a urologic surgeon for RENAL-NS. Final pathology was used to classify tumors as benign or malignant and low (I/II) or high (III/IV) Fuhrman grade. Patient age, gender, and RENAL score were entered into the nomogram described by Kutikov et al. to determine probabilities of cancer and high-grade disease. Area under the curve was determined to assess agreement between observed and expected outcomes for prediction of benign vs. malignant disease and for prediction of high- vs. low-grade or benign disease. A total of 250 patients with 252 masses underwent PN during the study period; 179/250 (71.6%) had preoperative imaging available. RENAL-NS was assigned to 181 masses. Twenty-two percent of tumors were benign. Eighteen percent of tumors were high grade. Area under the curve was 0.648 for predicting benign vs. malignant disease and 0.955 for predicting low-grade or benign vs. high-grade disease. The RENAL-NS score nomogram by Kutikov does not discriminate well between benign and malignant disease for small renal masses. The nomogram may potentially be useful in identifying high-grade tumors. Further validation is required where the nomogram probability and final pathologic specimen are available. Copyright © 2014 Elsevier Inc. All rights reserved.

Novel cell culture technique for primary ductal carcinoma in situ: role of Notch and epidermal growth factor receptor signaling pathways.

PubMed

Farnie, Gillian; Clarke, Robert B; Spence, Katherine; Pinnock, Natasha; Brennan, Keith; Anderson, Neil G; Bundred, Nigel J

2007-04-18

The epidermal growth factor receptor (EGFR) and Notch signaling pathways have been implicated in self-renewal of normal breast stem cells. We investigated the involvement of these signaling pathways in ductal carcinoma in situ (DCIS) of the breast. Samples of normal breast tissue (n = 15), pure DCIS tissue of varying grades (n = 35), and DCIS tissue surrounding an invasive cancer (n = 7) were used for nonadherent (i.e., mammosphere) culture. Mammosphere cultures were treated at day 0 with gefitinib (an EGFR inhibitor), DAPT (N-[N-(3,5-difluorophenacetyl-L-alanyl)]-S-phenylglycine t-butyl ester) (a gamma-secretase inhibitor), or Notch 4-neutralizing antibody. Mammosphere-forming efficiency (MFE) was calculated by dividing the number of mammospheres of 60 microm or more formed by the number of single cells seeded and is expressed as a percentage. The Notch 1 intracellular domain (NICD) was detected immunohistochemically in paraffin-embedded DCIS tissue from 50 patients with at least 60 months of follow-up. All statistical tests were two-sided. DCIS had a greater MFE than normal breast tissue (1.5% versus 0.5%, difference = 1%, 95% confidence interval [CI] = 0.62% to 1.25%, P<.001). High-grade DCIS had a greater MFE than low-grade DCIS (1.6% versus 1.09%, difference = 0.51%, 95% CI = 0.07% to 0.94%, P = .01). The MFE of high-grade DCIS treated with gefitinib in the absence of exogenous EGF was lower than that of high-grade DCIS treated with mammosphere medium lacking gefitinib and exogenous EGF (0.56% versus 1.36%, difference 0.8%, 95% CI = 0.33% to 1.4%, P = .004). Increased Notch signaling as detected by NICD staining was associated with recurrence at 5 years (P = .012). DCIS MFE was reduced when Notch signaling was inhibited using either DAPT (0.89% versus 0.51%, difference = 0.38%, 95% CI = 0.2% to 0.6%, P<.001) or a Notch 4-neutralizing antibody (0.97% versus 0.2%, difference = 0.77%, 95% CI = 0.52% to 1.0%, P<.001). We describe a novel primary culture technique for DCIS. Inhibition of the EGFR or Notch signaling pathways reduced DCIS MFE.

The distribution of ductal carcinoma in situ (DCIS) grade in 4232 women and its impact on overdiagnosis in breast cancer screening.

PubMed

van Luijt, P A; Heijnsdijk, E A M; Fracheboud, J; Overbeek, L I H; Broeders, M J M; Wesseling, J; den Heeten, G J; de Koning, H J

2016-05-10

The incidence of ductal carcinoma in situ (DCIS) has rapidly increased over time. The malignant potential of DCIS is dependent on its differentiation grade. Our aim is to determine the distribution of different grades of DCIS among women screened in the mass screening programme, and women not screened in the mass screening programme, and to estimate the amount of overdiagnosis by grade of DCIS. We retrospectively included a population-based sample of 4232 women with a diagnosis of DCIS in the years 2007-2009 from the Nationwide network and registry of histopathology and cytopathology in the Netherlands. Excluded were women with concurrent invasive breast cancer, lobular carcinoma in situ and no DCIS, women recently treated for invasive breast cancer, no grade mentioned in the record, inconclusive record on invasion, and prevalent DCIS. The screening status was obtained via the screening organisations. The distribution of grades was incorporated in the well-established and validated microsimulation model MISCAN. Overall, 17.7 % of DCIS were low grade, 31.4 % intermediate grade, and 50.9 % high grade. This distribution did not differ by screening status, but did vary by age. Older women were more likely to have low-grade DCIS than younger women. Overdiagnosis as a proportion of all cancers in women of the screening age was 61 % for low-grade, 57 % for intermediate-grade, 45 % for high-grade DCIS. For women age 50-60 years with a high-grade DCIS this overdiagnosis rate was 21-29 %, compared to 50-66 % in women age 60-75 years with high-grade DCIS. Amongst the rapidly increasing numbers of DCIS diagnosed each year is a significant number of overdiagnosed cases. Tailoring treatment to the probability of progression is the next step to preventing overtreatment. The basis of this tailoring could be DCIS grade and age.

Relative efficiency and productivity: a preliminary exploration of public hospitals in Beijing, China.

PubMed

Li, Hao; Dong, Siping; Liu, Tingfang

2014-04-06

Third-grade hospitals in Beijing have been rapidly developing in capacity and scale for many years. These hospitals receive a large number of patients, and ensuring their efficient operation is crucial in meeting people's healthcare needs. In this context, a study of their relative efficiency and productivity would be helpful to identify the driving factors and further improve their performance. After a review of literature, the current numbers of open beds and employees were selected as input variables. The number of outpatient and emergency visits and the number of discharged patients were selected as output variables. A total of 12 third-grade Class A general public hospitals in Beijing were selected for a preliminary study. The panel data from 2006-2009 were collected by the National Institute of Hospital Administration, Ministry of Health of P.R. China. Descriptive analysis and data envelopment analysis were used to analyze the data using Stata 10.0 and DEAP(V2.1) software. In the 2006-2009 period, descriptive results show that sample hospitals continuously expanded their capacity and scale, with growth rate of total revenue being the highest among all variables. The DEA results show that the average annual growth rate of productivity was 26.7%, and the rates were 47.3%, 21.3% and 13.8% respectively for two consecutive years. The average annual growth rate of technological change was 28.3%, and the rates were 49.4%, 21.5% and 16.4% respectively for two consecutive years. The average annual growth rate of technical efficiency change was -1.3%, and the rates were -1.4%, -0.02% and -2.2% respectively for two consecutive years. The sample hospitals in Beijing experienced substantial productivity growth, but annual growth rates were declining. Substantial technological change was the main contributor to the growth. Although some hospitals exhibited improvements in technical efficiency, there was a slight decline in general. To improve overall efficiency and productivity, both government and hospitals need to further drive positive technological change, technical change, and allocative efficiency of public hospitals. More empirical studies are needed to include more hospitals of all three grades at a larger scale.

Cilengitide in Treating Children With Refractory Primary Brain Tumors

ClinicalTrials.gov

2013-09-27

Childhood Central Nervous System Germ Cell Tumor; Childhood Choroid Plexus Tumor; Childhood Craniopharyngioma; Childhood Ependymoblastoma; Childhood Grade I Meningioma; Childhood Grade II Meningioma; Childhood Grade III Meningioma; Childhood High-grade Cerebellar Astrocytoma; Childhood High-grade Cerebral Astrocytoma; Childhood Infratentorial Ependymoma; Childhood Low-grade Cerebellar Astrocytoma; Childhood Low-grade Cerebral Astrocytoma; Childhood Medulloepithelioma; Childhood Mixed Glioma; Childhood Oligodendroglioma; Childhood Supratentorial Ependymoma; Recurrent Childhood Brain Stem Glioma; Recurrent Childhood Brain Tumor; Recurrent Childhood Cerebellar Astrocytoma; Recurrent Childhood Cerebral Astrocytoma; Recurrent Childhood Ependymoma; Recurrent Childhood Medulloblastoma; Recurrent Childhood Pineoblastoma; Recurrent Childhood Subependymal Giant Cell Astrocytoma; Recurrent Childhood Supratentorial Primitive Neuroectodermal Tumor; Recurrent Childhood Visual Pathway and Hypothalamic Glioma

Temozolomide and O6-Benzylguanine in Treating Children With Recurrent Brain Tumors

ClinicalTrials.gov

2013-09-27

Childhood Central Nervous System Germ Cell Tumor; Childhood Choroid Plexus Tumor; Childhood Craniopharyngioma; Childhood Ependymoblastoma; Childhood Grade I Meningioma; Childhood Grade II Meningioma; Childhood Grade III Meningioma; Childhood High-grade Cerebellar Astrocytoma; Childhood High-grade Cerebral Astrocytoma; Childhood Infratentorial Ependymoma; Childhood Low-grade Cerebellar Astrocytoma; Childhood Low-grade Cerebral Astrocytoma; Childhood Medulloepithelioma; Childhood Mixed Glioma; Childhood Oligodendroglioma; Childhood Supratentorial Ependymoma; Recurrent Childhood Brain Stem Glioma; Recurrent Childhood Cerebellar Astrocytoma; Recurrent Childhood Cerebral Astrocytoma; Recurrent Childhood Ependymoma; Recurrent Childhood Medulloblastoma; Recurrent Childhood Pineoblastoma; Recurrent Childhood Subependymal Giant Cell Astrocytoma; Recurrent Childhood Supratentorial Primitive Neuroectodermal Tumor; Recurrent Childhood Visual Pathway and Hypothalamic Glioma

Lenalidomide in Treating Young Patients With Recurrent, Progressive, or Refractory CNS Tumors

ClinicalTrials.gov

2013-09-27

Childhood Atypical Teratoid/Rhabdoid Tumor; Childhood Central Nervous System Germ Cell Tumor; Childhood Choroid Plexus Tumor; Childhood Craniopharyngioma; Childhood Ependymoblastoma; Childhood Grade I Meningioma; Childhood Grade II Meningioma; Childhood Grade III Meningioma; Childhood High-grade Cerebellar Astrocytoma; Childhood High-grade Cerebral Astrocytoma; Childhood Infratentorial Ependymoma; Childhood Low-grade Cerebellar Astrocytoma; Childhood Low-grade Cerebral Astrocytoma; Childhood Medulloepithelioma; Childhood Mixed Glioma; Childhood Oligodendroglioma; Childhood Supratentorial Ependymoma; Recurrent Childhood Brain Tumor; Recurrent Childhood Cerebellar Astrocytoma; Recurrent Childhood Cerebral Astrocytoma; Recurrent Childhood Ependymoma; Recurrent Childhood Medulloblastoma; Recurrent Childhood Pineoblastoma; Recurrent Childhood Subependymal Giant Cell Astrocytoma; Recurrent Childhood Supratentorial Primitive Neuroectodermal Tumor; Recurrent Childhood Visual Pathway and Hypothalamic Glioma

Betaine Improves Polymer-Grade D-Lactic Acid Production by Sporolactobacillus inulinus Using Ammonia as Green Neutralizer.

PubMed

Lv, Guoping; Che, Chengchuan; Li, Li; Xu, Shujing; Guan, Wanyi; Zhao, Baohua; Ju, Jiansong

2017-07-06

The traditional CaCO3-based fermentation process generates huge amount of insoluble CaSO4 waste. To solve this problem, we have developed an efficient and green D-lactic acid fermentation process by using ammonia as neutralizer. The 106.7 g/L of D-lactic acid production and 0.89 g per g of consumed sugar were obtained by Sporolactobacillus inulinus CASD with a high optical purity of 99.7% by adding 100 mg/L betaine in the simple batch fermentation process. The addition of betaine was experimentally proven to protect cell at high concentration of ammonium ion, increase the D-lactate dehydrogenase specific activity and thus promote the production of D-lactic acid.

Conversion of deuterium gas to heavy water by catalytic isotopic exchange using wetproof catalyst

DOE Office of Scientific and Technical Information (OSTI.GOV)

Quaiattini, R.J.; McGauley, M.P.; Burns, D.L.

The invention at Chalk River Nuclear Laboratories of a simple method of wetproofing platinum catalysts allows them to retain their activity in liquid water. High performance catalysts for the hydrogen-water isotope exchange reaction that remain active for years can now be routinely produced. The first commercial application using the ordered-bed-type wetproofed isotope exchange catalyst developed and patented by Atomic Energy of Canada Ltd. has been successfully completed. Approximately 9100 m/sup 3/ of deuterium gas stored at Brookhaven National Laboratory was converted to high grade heavy water. Conversion efficiency exceeded 99.8%. The product D/sub 2/O concentration was 6.7 percentage points highermore » than the feed D/sub 2/ gas.« less

The Swedish infant high-grade reflux trial: Study presentation and vesicoureteral reflux outcome.

PubMed

Nordenström, Josefin; Holmdahl, Gundela; Brandström, Per; Sixt, Rune; Stokland, Eira; Sillén, Ulla; Sjöström, Sofia

2017-04-01

High-grade vesicoureteral reflux (VUR) in infants is associated with congenital renal abnormalities, recurrent UTI, and bladder dysfunction. Endoscopic treatment (ET) is a well-established method in children with low to moderate reflux grades, but there is a lack of randomised controlled trials regarding the use of ET versus continuous antibiotic prophylaxis in infants with high-grade VUR. This study aimed to determine whether high-grade VUR in infants can be treated with endoscopic injection and whether ET is superior to antibiotic prophylaxis in the treatment of VUR. This prospective, randomised, controlled, multicentre, 1-year follow-up trial comprised 77 infants (55 boys, 22 girls) <8 months of age with VUR grade 4-5 (n = 30/n = 47). Of the infants, 52 (68%) had bilateral VUR. Thirty-nine were randomised to antibiotic prophylaxis and 38 to ET (with prophylaxis until resolution). Voiding cystourethrogram, ultrasound, renal scintigraphy, and free voiding observation were performed at study entry and after 1 year to evaluate VUR grade, and renal and bladder function. VUR grade ≤2 was seen in 22 (59%) infants in the endoscopy group and eight (21%) in the prophylaxis group at follow-up (p = 0.0014). The success rate in the endoscopy group was 100% in unilateral grade 4, falling to 31% in bilateral grade 5 (p = 0.0094). Correspondingly, the results in the prophylaxis group were 40% in grade 4 down to 0% in bilateral grade 5 (p = 0.037) (Table). Logistic regression analyses identified ET, VUR grade 4, unilaterality, and low residual urine at baseline as positive predictors of VUR down-grading to ≤2 (area under ROC curve 0.88). In four patients with reflux resolution after one injection, dilating reflux recurred at the 1-year follow-up. One patient had a UTI possibly related to ET. In our material four patients required re-implantation, of whom one was obstructive after injection. The opportunity to offer even small infants with high-grade VUR an alternative, minimally invasive treatment option is a great advance in paediatric urology. In this high-risk group, bilateral VUR grade 5 stands out with its poor bladder function and low chance of resolution. The recurrence rate of dilating VUR after successful ET is consistent with previous studies. The limitations are the relatively small number of patients and the short follow-up. High-grade VUR in infants can be treated with injection therapy and the resolution rate is higher than that of prophylaxis treatment. The complication rate is low and VUR grade 4, unilaterality, and low residual urine are favourable for the resolution and down-grading of VUR. Copyright © 2016 Journal of Pediatric Urology Company. Published by Elsevier Ltd. All rights reserved.

A Pilot Feasibility Study of Oral 5-Fluorocytosine and Genetically-Modified Neural Stem Cells Expressing E.Coli Cytosine Deaminase for Treatment of Recurrent High Grade Gliomas

ClinicalTrials.gov

2017-11-07

Adult Anaplastic Astrocytoma; Recurrent Grade III Glioma; Recurrent Grade IV Glioma; Adult Anaplastic Oligodendroglioma; Adult Brain Tumor; Adult Giant Cell Glioblastoma; Adult Glioblastoma; Adult Gliosarcoma; Adult Mixed Glioma; Recurrent Adult Brain Tumor; Adult Anaplastic Oligoastrocytoma; Recurrent High Grade Glioma

A Follow-up Study of Two Methods of Teaching Mathematics: Traditional versus New Math

ERIC Educational Resources Information Center

Walton, Gene A.; And Others

1977-01-01

When high school mathematics grades and test scores were analyzed, findings showed that high- and middle-ability students who had a modern mathematics course in the seventh grade received significantly higher grades in Algebra I, II, III, and Geometry than did students who had a traditional seventh grade mathematics course. (DT)

Investigation of efficiency enhancement in InGaN MQW LED with compositionally step graded GaN/InAlN/GaN multi-layer barrier

NASA Astrophysics Data System (ADS)

Prajoon, P.; Anuja Menokey, M.; Charles Pravin, J.; Ajayan, J.; Rajesh, S.; Nirmal, D.

2018-04-01

The advantage of InGaN multiple Quantum well (MQW) Light emitting diode (LED) on a SiC substrate with compositionally step graded GaN/InAlN/GaN multi-layer barrier (MLB) is studied. The Internal quantum efficiency, Optical power, current-voltage characteristics, spontaneous emission rate and carrier distribution profile in the active region are investigated using Sentaurus TCAD simulation. An analytical model is also developed to describe the QW carrier injection efficiency, by including carrier leakage mechanisms like carrier overflow, thermionic emission and tunnelling. The enhanced electron confinement, reduced carrier asymmetry, and suppressed carrier overflow in the active region of the MLB MQW LED leads to render a superior performance than the conventional GaN barrier MQW LED. The simulation result also elucidates the efficiency droop behaviour in the MLB MQW LED, it suggests that the efficiency droop effect is remarkably improved when the GaN barrier is replaced with GaN/InAlN/GaN MLB barrier. The analysis shows a dominating behaviour of carrier escape mechanism due to tunnelling. Moreover, the lower lattice mismatching of SiC substrate with GaN epitaxial layer is attributed with good crystal quality and reduced polarization effect, ultimately enhances the optical performance of the LEDs.

Behavioral Attention: A Longitudinal Study of Whether and How It Influences the Development of Word Reading and Reading Comprehension among At-Risk Readers

PubMed Central

Miller, Amanda C.; Fuchs, Douglas; Fuchs, Lynn S.; Compton, Donald L.; Kearns, Devin; Zhang, Wenjuan; Yen, Loulee; Patton, Samuel; Kirchner, Danielle

2014-01-01

The purpose of this study was to examine the extent to which teacher ratings of behavioral attention predicted responsiveness to word reading instruction in first grade and third-grade reading comprehension performance. Participants were 110 first grade students identified as at-risk for reading difficulties who received 20 weeks of intensive reading intervention in combination with classroom reading instruction. Path analysis indicated that teacher ratings of student attention significantly predicted students’ word reading growth in first grade even when they were competed against other relevant predictors (phonological awareness, nonword reading, sight word efficiency, vocabulary, listening comprehension, hyperactivity, nonverbal reasoning, and short term memory). Also, student attention demonstrated a significant indirect effect on third grade reading comprehension via word reading, but not via listening comprehension. Results suggest that student attention (indexed by teacher ratings) is an important predictor of at-risk readers’ responsiveness to reading instruction in first grade and that first-grade reading growth mediates the relationship between students’ attention and their future level of reading comprehension. The importance of considering ways to manage and improve behavioral attention when implementing reading instruction is discussed. PMID:25110548

3D Texture Analysis in Renal Cell Carcinoma Tissue Image Grading

PubMed Central

Cho, Nam-Hoon; Choi, Heung-Kook

2014-01-01

One of the most significant processes in cancer cell and tissue image analysis is the efficient extraction of features for grading purposes. This research applied two types of three-dimensional texture analysis methods to the extraction of feature values from renal cell carcinoma tissue images, and then evaluated the validity of the methods statistically through grade classification. First, we used a confocal laser scanning microscope to obtain image slices of four grades of renal cell carcinoma, which were then reconstructed into 3D volumes. Next, we extracted quantitative values using a 3D gray level cooccurrence matrix (GLCM) and a 3D wavelet based on two types of basis functions. To evaluate their validity, we predefined 6 different statistical classifiers and applied these to the extracted feature sets. In the grade classification results, 3D Haar wavelet texture features combined with principal component analysis showed the best discrimination results. Classification using 3D wavelet texture features was significantly better than 3D GLCM, suggesting that the former has potential for use in a computer-based grading system. PMID:25371701

Evaluation of patellar chondromalacia with MR: comparison between T2-weighted FSE SPIR and GE MTC.

PubMed

Macarini, Luca; Perrone, Alessandra; Murrone, Mario; Marini, Stefania; Stefanelli, Michele

2004-09-01

To compare two different MR sequences to tissue signal suppression in the study of patellar cartilage abnormalities. We examined 26 patients with magnetic resonance (MR) imaging: sequences included spectral presaturation with inversion recovery (SPIR), with fat suppression and T2-weighted images, magnetization transfer contrast (MTC) sequences, T1-weighted and T2-weighted spin-echo sequences. All patients underwent conventional knee arthroscopy and in all patients a hyaline cartilage lesion was assessed in three articular zones: the patellar medial facet, the lateral facet and the patellar crista. Was assessed 78 articular facets. The lesions were classified using a standard arthroscopic grading system adapted to MR imaging: normal cartilage that corresponds to the grade 0 according to the Noyes grading system, low grade lesions that correspond to the grade I e IIa and high grade lesions that correspond to grades IIb and III. The arthroscopic results were compared with MR images. We assessed the MR diagnostic accuracy, sensitivity, specificity and MR positive predictive value and negative predictive value of the two sequences taking into consideration total lesions, and high-grade and low grade lesions separately. Twenty-four low grade lesions (16 grade I e 8 grade IIa) and 18 high grade lesions (10 grade IIb e 8 grade III) were diagnosed by arthroscopy. Regarding low grade and high-grade lesions together, the accuracy was 77% for MTC sequences and 90% for SPIR sequences. In identifying low-grade lesions, the sensitivity was 88% for SPIR sequence and 42% for MTC sequences. Specificity for the detection of all lesions was 89% for the SPIR sequences and 94% for the MTC sequences. The SPIR sequence visualised water content abnormalities in degenerating cartilage, which are representative of low-grade lesions. The sensitivity of the sequence enabled us to obtain improved contrast for detecting cartilage surface irregularities. The MTC sequences allowed us to grade high-grade lesions susceptible to surgery and small cartilage defects in the presence of joint fluid. The MTC sequences were insufficient in the diagnosis of early stages of chondromalacia because the suppression of the signal of bonded water reduced the contrast among areas of articular cartilage with different water content. For this reason cartilage oedema and early superficial fibrillation were not identified. In our experience the SPIR sequence proved superior to the MTC sequence in the identification of low grade lesions of the patellar cartilage. The overall value of such sequences in the study of articular pathology also needs to be assessed in the others sites where the articular cartilage is thinner and surfaces more curvilinear.

Susceptibility Imaging in Glial Tumor Grading; Using 3 Tesla Magnetic Resonance (MR) System and 32 Channel Head Coil.

PubMed

Aydin, Omer; Buyukkaya, Ramazan; Hakyemez, Bahattin

2017-01-01

Susceptibility weighted imaging (SWI) is a velocity compensated, high-resolution three-dimensional (3D) spoiled gradient-echo sequence that uses magnitude and filtered-phase data. SWI seems to be a valuable tool for non-invasive evaluation of central nervous system gliomas. Relative cerebral blood volume (rCBV) ratio is one of the best noninvasive methods for glioma grading. Degree of intratumoral susceptibility signal (ITSS) on SWI correlates with rCBV ratio and histopathological grade. This study investigated the effectiveness of ITSS grading and rCBV ratio in preoperative assessment. Thirty-one patients (17 males and 14 females) with histopathogical diagnosis of glial tumor undergoing routine cranial MRI, SWI, and perfusion MRI examinations between October 2011 and July 2013 were retrospectively enrolled. All examinations were performed using 3T apparatus with 32-channel head coil. We used ITSS number for SWI grading. Correlations between SWI grade, rCBV ratio, and pathological grading were evaluated. ROC analysis was performed to determine the optimal rCBV ratio to distinguish between high-grade and low-grade glial tumors. There was a strong positive correlation between both pathological and SWI grading. We determined the optimal rCBV ratio to discriminate between high-grade and low-grade tumors to be 2.21. In conclusion, perfusion MRI and SWI using 3T MR and 32-channel head coil may provide useful information for preoperative glial tumor grading. SWI can be used as an accessory to perfusion MR technique in preoperative tumor grading.

Thermal rectification in mass-graded next-nearest-neighbor Fermi-Pasta-Ulam lattices

NASA Astrophysics Data System (ADS)

Romero-Bastida, M.; Miranda-Peña, Jorge-Orlando; López, Juan M.

2017-03-01

We study the thermal rectification efficiency, i.e., quantification of asymmetric heat flow, of a one-dimensional mass-graded anharmonic oscillator Fermi-Pasta-Ulam lattice both with nearest-neighbor (NN) and next-nearest-neighbor (NNN) interactions. The system presents a maximum rectification efficiency for a very precise value of the parameter that controls the coupling strength of the NNN interactions, which also optimizes the rectification figure when its dependence on mass asymmetry and temperature differences is considered. The origin of the enhanced rectification is the asymmetric local heat flow response as the heat reservoirs are swapped when a finely tuned NNN contribution is taken into account. A simple theoretical analysis gives an estimate of the optimal NNN coupling in excellent agreement with our simulation results.

[Grading of gynecological tumors : Current aspects].

PubMed

Horn, L-C; Mayr, D; Brambs, C E; Einenkel, J; Sändig, I; Schierle, K

2016-07-01

Histopathological assessment of the tumor grade and cell type is central to the management and prognosis of various gynecological malignancies. Conventional grading systems for squamous carcinomas and adenocarcinomas of the vulva, vagina and cervix are poorly defined. For endometrioid tumors of the female genital tract as well as for mucinous endometrial, ovarian and seromucinous ovarian carcinomas, the 3‑tiered FIGO grading system is recommended. For uterine neuroendocrine tumors the grading system of the gastrointestinal counterparts has been adopted. Uterine leiomyosarcomas are not graded. Endometrial stromal sarcomas are divided into low and high grades, based on cellular morphology, immunohistochemical and molecular findings. A chemotherapy response score was established for chemotherapeutically treated high-grade serous pelvic cancer. For non-epithelial ovarian malignancies, only Sertoli-Leydig cell tumors and immature teratomas are graded. At this time molecular profiling has no impact on the grading of tumors of the female genital tract.

Waste Heat-to-Power Using Scroll Expander for Organic Rankine Bottoming Cycle

DOE Office of Scientific and Technical Information (OSTI.GOV)

Dieckmann, John; Smutzer, Chad; Sinha, Jayanti

The objective of this program was to develop a novel, scalable scroll expander for conversion of waste heat to power; this was accomplished and demonstrated in both a bench-scale system as well as a full-scale system. The expander is a key component in Organic Rankine Cycle (ORC) waste heat recovery systems which are used to convert medium-grade waste heat to electric power in a wide range of industries. These types of waste heat recovery systems allow for the capture of energy that would otherwise just be exhausted to the atmosphere. A scroll expander has the benefit over other technologies ofmore » having high efficiency over a broad range of operating conditions. The speed range of the TIAX expander (1,200 to 3,600 RPM) enables the shaft power output to directly drive an electric generator and produce 60 Hz electric power without incurring the equipment costs or losses of electronic power conversion. This greatly simplifies integration with the plant electric infrastructure. The TIAX scroll expander will reduce the size, cost, and complexity of a small-scale waste heat recovery system, while increasing the system efficiency compared to the prevailing ORC technologies at similar scale. During this project, TIAX demonstrated the scroll expander in a bench-scale test setup to have isentropic efficiency of 70-75% and operated it successfully for ~200 hours with minimal wear. This same expander was then installed in a complete ORC system driven by a medium grade waste heat source to generate 5-7 kW of electrical power. Due to funding constraints, TIAX was unable to complete this phase of testing, although the initial results were promising and demonstrated the potential of the technology.« less

What does it take to have a high-grade pivot shift?

PubMed

Tanaka, M; Vyas, D; Moloney, G; Bedi, A; Pearle, A D; Musahl, V

2012-04-01

The pivot shift is the most specific clinical test to assess pathological knee joint rotatory laxity following ACL injury. This article attempts to describe the anatomic structures responsible for creating a high-grade pivot shift and their potential role in customizing ACL reconstruction. A review of the literature demonstrates that disruption of the secondary stabilizers of anterior translation of the lateral compartment including the lateral meniscus, anterolateral capsule, and IT band contributes to a high-grade pivot shift in the ACL-deficient knee. The morphology of the lateral tibial plateau, including increased posteroinferior tibial slope and small size, can also contribute to high-grade pivot shift. Factors that may decrease the grade of the pivot shift include medial compartment injury, MCL injury, patient guarding, and osteoarthritis. In conclusion, a high-grade pivot shift in the ACL-deficient knee is often associated with incompetence of the lateral soft tissue envelope. Rotatory laxity as assessed by the pivot shift may also be falsely underestimated by concomitant injuries. IV.

Unsupervised Pathological Area Extraction using 3D T2 and FLAIR MR Images

NASA Astrophysics Data System (ADS)

Dvořák, Pavel; Bartušek, Karel; Smékal, Zdeněk

2014-12-01

This work discusses fully automated extraction of brain tumor and edema in 3D MR volumes. The goal of this work is the extraction of the whole pathological area using such an algorithm that does not require a human intervention. For the good visibility of these kinds of tissues both T2-weighted and FLAIR images were used. The proposed method was tested on 80 MR volumes of publicly available BRATS database, which contains high and low grade gliomas, both real and simulated. The performance was evaluated by the Dice coefficient, where the results were differentiated between high and low grade and real and simulated gliomas. The method reached promising results for all of the combinations of images: real high grade (0.73 ± 0.20), real low grade (0.81 ± 0.06), simulated high grade (0.81 ± 0.14), and simulated low grade (0.81 ± 0.04).

Photodynamic therapy of Cervical Intraepithelial Neoplasia (CIN) high grade

NASA Astrophysics Data System (ADS)

Carbinatto, Fernanda M.; Inada, Natalia M.; Lombardi, Welington; da Silva, Eduardo V.; Belotto, Renata; Kurachi, Cristina; Bagnato, Vanderlei S.

2016-02-01

Cervical intraepithelial neoplasia (CIN) is the precursor of invasive cervical cancer and associated with human papillomavirus (HPV) infection. Photodynamic therapy (PDT) is a technique that has been used for the treatment of tumors. PDT is based on the accumulation of a photosensitizer in target cells that will generate cytotoxic reactive oxygen species upon illumination, inducing the death of abnormal tissue and PDT with less damaging to normal tissues than surgery, radiation, or chemotherapy and seems to be a promising alternative procedure for CIN treatment. The CIN high grades (II and III) presents potential indications for PDT due the success of PDT for CIN low grade treatment. The patients with CIN high grade that were treated with new clinic protocol shows lesion regression to CIN low grade 60 days after the treatment. The new clinical protocol using for treatment of CIN high grade shows great potential to become a public health technique.

Pathology of Neuroendocrine Tumours of the Female Genital Tract.

PubMed

Howitt, Brooke E; Kelly, Paul; McCluggage, W Glenn

2017-09-01

Neuroendocrine tumours are uncommon or rare at all sites in the female genital tract. The 2014 World Health Organisation (WHO) Classification of neuroendocrine tumours of the endometrium, cervix, vagina and vulva has been updated with adoption of the terms low-grade neuroendocrine tumour and high-grade neuroendocrine carcinoma. In the endometrium and cervix, high-grade neoplasms are much more prevalent than low-grade and are more common in the cervix than the corpus. In the ovary, low-grade tumours are more common than high-grade carcinomas and the term carcinoid tumour is still used in WHO 2014. The term ovarian small-cell carcinoma of pulmonary type is included in WHO 2014 for a tumour which in other organs is termed high small-cell neuroendocrine carcinoma. Neuroendocrine tumours at various sites within the female genital tract often occur in association with other neoplasms and more uncommonly in pure form.

Genetic events in the progression of adenoid cystic carcinoma of the breast to high-grade triple-negative breast cancer.

PubMed

Fusco, Nicola; Geyer, Felipe C; De Filippo, Maria R; Martelotto, Luciano G; Ng, Charlotte K Y; Piscuoglio, Salvatore; Guerini-Rocco, Elena; Schultheis, Anne M; Fuhrmann, Laetitia; Wang, Lu; Jungbluth, Achim A; Burke, Kathleen A; Lim, Raymond S; Vincent-Salomon, Anne; Bamba, Masamichi; Moritani, Suzuko; Badve, Sunil S; Ichihara, Shu; Ellis, Ian O; Reis-Filho, Jorge S; Weigelt, Britta

2016-11-01

Adenoid cystic carcinoma of the breast is a rare histological type of triple-negative breast cancer with an indolent clinical behavior, often driven by the MYB-NFIB fusion gene. Here we sought to define the repertoire of somatic genetic alterations in two adenoid cystic carcinomas associated with high-grade triple-negative breast cancer. The different components of each case were subjected to copy number profiling and massively parallel sequencing targeting all exons and selected regulatory and intronic regions of 488 genes. Reverse transcription PCR and fluorescence in situ hybridization were employed to investigate the presence of the MYB-NFIB translocation. The MYB-NFIB fusion gene was detected in both adenoid cystic carcinomas and their associated high-grade triple-negative breast cancer components. Although the distinct components of both cases displayed similar patterns of gene copy number alterations, massively parallel sequencing analysis revealed intratumor genetic heterogeneity. In case 1, progression from the trabecular adenoid cystic carcinoma to the high-grade triple-negative breast cancer was found to involve clonal shifts with enrichment of mutations affecting EP300, NOTCH1, ERBB2 and FGFR1 in the high-grade triple-negative breast cancer. In case 2, a clonal KMT2C mutation was present in the cribriform adenoid cystic carcinoma, solid adenoid cystic carcinoma and high-grade triple-negative breast cancer components, whereas a mutation affecting MYB was present only in the solid and high-grade triple-negative breast cancer areas and additional three mutations targeting STAG2, KDM6A and CDK12 were restricted to the high-grade triple-negative breast cancer. In conclusion, adenoid cystic carcinomas of the breast with high-grade transformation are underpinned by the MYB-NFIB fusion gene and, akin to other forms of cancer, may be constituted by a mosaic of cancer cell clones at diagnosis. The progression from adenoid cystic carcinoma to high-grade triple-negative breast cancer of no special type may involve the selection of neoplastic clones and/or the acquisition of additional genetic alterations.

Genetic events in the progression of adenoid cystic carcinoma of the breast to high-grade triple-negative breast cancer

PubMed Central

Fusco, Nicola; Geyer, Felipe C; De Filippo, Maria R; Martelotto, Luciano G; Ng, Charlotte K Y; Piscuoglio, Salvatore; Guerini-Rocco, Elena; Schultheis, Anne M; Fuhrmann, Laetitia; Wang, Lu; Jungbluth, Achim A; Burke, Kathleen A; Lim, Raymond S; Vincent-Salomon, Anne; Bamba, Masamichi; Moritani, Suzuko; Badve, Sunil S; Ichihara, Shu; Ellis, Ian O; Reis-Filho, Jorge S; Weigelt, Britta

2016-01-01

Adenoid cystic carcinoma of the breast is a rare histologic type of triple-negative breast cancer with an indolent clinical behavior, often driven by the MYB-NFIB fusion gene. Here we sought to define the repertoire of somatic genetic alterations in two adenoid cystic carcinomas associated with high-grade triple-negative breast cancer. The different components of each case were subjected to copy number profiling and massively parallel sequencing targeting all exons and selected regulatory and intronic regions of 488 genes. Reverse transcription PCR and fluorescence in situ hybridization were employed to investigate the presence of the MYB-NFIB translocation. The MYB-NFIB fusion gene was detected in both adenoid cystic carcinomas and their associated high-grade triple-negative breast cancer components. Whilst the distinct components of both cases displayed similar patterns of gene copy number alterations, massively parallel sequencing analysis revealed intra-tumor genetic heterogeneity. In case 1, progression from the trabecular adenoid cystic carcinoma to the high-grade triple-negative breast cancer was found to involve clonal shifts with enrichment of mutations affecting EP300, NOTCH1, ERBB2 and FGFR1 in the high-grade triple-negative breast cancer. In case 2, a clonal KMT2C mutation was present in the cribriform adenoid cystic carcinoma, solid adenoid cystic carcinoma and high-grade triple-negative breast cancer components, whereas a mutation affecting MYB was present only in the solid and high-grade triple-negative breast cancer areas and additional three mutations targeting STAG2, KDM6A and CDK12 were restricted to the high-grade triple-negative breast cancer. In conclusion, adenoid cystic carcinomas of the breast with high-grade transformation are underpinned by MYB-NFIB fusion gene, and, akin to other forms of cancer, may be constituted by a mosaic of cancer cell clones at diagnosis. The progression from adenoid cystic carcinoma to high-grade triple-negative breast cancer of no special type may involve the selection of neoplastic clones and/ or the acquisition of additional genetic alterations. PMID:27491809

Cytological grading of canine cutaneous mast cell tumours.

PubMed

Scarpa, Filippo; Sabattini, Silvia; Bettini, Giuliano

2016-09-01

A cytological grading for mast cell tumours (MCTs) would be highly desirable, allowing to select the most appropriate therapeutic intervention prior to surgery. This study evaluates the applicability on fine-needle aspirations (FNAs) of the novel Kiupel grading system, based on number of mitoses, multinucleated cells, bizarre nuclei and presence of karyomegaly. Fifty consecutive cases with pre-operative cytological diagnosis were included. In cytological specimens, approximately 1000 cells were evaluated, and the histological grade was assessed on the corresponding resected specimens. On cytology, the above parameters were significantly different between histologically low-grade and high-grade tumours (P < 0.001). The cytograding correctly predicted the histological grade in 47 cases (accuracy, 94%; sensitivity, 84.6%; specificity, 97.3%). Two high-grade MCTs (4%) were not detected on cytology. The cytograding can provide helpful insights to assist clinical decisions in most cases. However, the risk of underestimation in a minority of patients represents a limit to the overall utility of the technique. © 2014 John Wiley & Sons Ltd.

Voltage-dependent K+ channels improve the energy efficiency of signalling in blowfly photoreceptors

PubMed Central

2017-01-01

Voltage-dependent conductances in many spiking neurons are tuned to reduce action potential energy consumption, so improving the energy efficiency of spike coding. However, the contribution of voltage-dependent conductances to the energy efficiency of analogue coding, by graded potentials in dendrites and non-spiking neurons, remains unclear. We investigate the contribution of voltage-dependent conductances to the energy efficiency of analogue coding by modelling blowfly R1-6 photoreceptor membrane. Two voltage-dependent delayed rectifier K+ conductances (DRs) shape the membrane's voltage response and contribute to light adaptation. They make two types of energy saving. By reducing membrane resistance upon depolarization they convert the cheap, low bandwidth membrane needed in dim light to the expensive high bandwidth membrane needed in bright light. This investment of energy in bandwidth according to functional requirements can halve daily energy consumption. Second, DRs produce negative feedback that reduces membrane impedance and increases bandwidth. This negative feedback allows an active membrane with DRs to consume at least 30% less energy than a passive membrane with the same capacitance and bandwidth. Voltage-dependent conductances in other non-spiking neurons, and in dendrites, might be organized to make similar savings. PMID:28381642

Voltage-dependent K+ channels improve the energy efficiency of signalling in blowfly photoreceptors.

PubMed

Heras, Francisco J H; Anderson, John; Laughlin, Simon B; Niven, Jeremy E

2017-04-01

Voltage-dependent conductances in many spiking neurons are tuned to reduce action potential energy consumption, so improving the energy efficiency of spike coding. However, the contribution of voltage-dependent conductances to the energy efficiency of analogue coding, by graded potentials in dendrites and non-spiking neurons, remains unclear. We investigate the contribution of voltage-dependent conductances to the energy efficiency of analogue coding by modelling blowfly R1-6 photoreceptor membrane. Two voltage-dependent delayed rectifier K + conductances (DRs) shape the membrane's voltage response and contribute to light adaptation. They make two types of energy saving. By reducing membrane resistance upon depolarization they convert the cheap, low bandwidth membrane needed in dim light to the expensive high bandwidth membrane needed in bright light. This investment of energy in bandwidth according to functional requirements can halve daily energy consumption. Second, DRs produce negative feedback that reduces membrane impedance and increases bandwidth. This negative feedback allows an active membrane with DRs to consume at least 30% less energy than a passive membrane with the same capacitance and bandwidth. Voltage-dependent conductances in other non-spiking neurons, and in dendrites, might be organized to make similar savings. © 2017 The Author(s).

The relation of parenting style to adolescent school performance.

PubMed

Dornbusch, S M; Ritter, P L; Leiderman, P H; Roberts, D F; Fraleigh, M J

1987-10-01

This article develops and tests a reformation of Baumrind's typology of authoritarian, permissive, and authoritative parenting styles in the context of adolescent school performance. Using a large and diverse sample of San Francisco Bay Area high school students (N = 7,836), we found that both authoritarian and permissive parenting styles were negatively associated with grades, and authoritative parenting was positively associated with grades. Parenting styles generally showed the expected relation to grades across gender, age, parental education, ethnic, and family structure categories. Authoritarian parenting tended to have a stronger association with grades than did the other 2 parenting styles, except among Hispanic males. The full typology best predicted grades among white students. Pure authoritative families (high on authoritative but not high on the other 2 indices) had the highest mean grades, while inconsistent families that combine authoritarian parenting with other parenting styles had the lowest grades.

Histogram analysis of diffusion kurtosis imaging derived maps may distinguish between low and high grade gliomas before surgery.

PubMed

Qi, Xi-Xun; Shi, Da-Fa; Ren, Si-Xie; Zhang, Su-Ya; Li, Long; Li, Qing-Chang; Guan, Li-Ming

2018-04-01

To investigate the value of histogram analysis of diffusion kurtosis imaging (DKI) maps in the evaluation of glioma grading. A total of 39 glioma patients who underwent preoperative magnetic resonance imaging (MRI) were classified into low-grade (13 cases) and high-grade (26 cases) glioma groups. Parametric DKI maps were derived, and histogram metrics between low- and high-grade gliomas were analysed. The optimum diagnostic thresholds of the parameters, area under the receiver operating characteristic curve (AUC), sensitivity, and specificity were achieved using a receiver operating characteristic (ROC). Significant differences were observed not only in 12 metrics of histogram DKI parameters (P<0.05), but also in mean diffusivity (MD) and mean kurtosis (MK) values, including age as a covariate (F=19.127, P<0.001 and F=20.894, P<0.001, respectively), between low- and high-grade gliomas. Mean MK was the best independent predictor of differentiating glioma grades (B=18.934, 22.237 adjusted for age, P<0.05). The partial correlation coefficient between fractional anisotropy (FA) and kurtosis fractional anisotropy (KFA) was 0.675 (P<0.001). The AUC of the mean MK, sensitivity, and specificity were 0.925, 88.5% and 84.6%, respectively. DKI parameters can effectively distinguish between low- and high-grade gliomas. Mean MK is the best independent predictor of differentiating glioma grades. • DKI is a new and important method. • DKI can provide additional information on microstructural architecture. • Histogram analysis of DKI may be more effective in glioma grading.

Management of high-grade dysplasia in Barrett's esophagus.

PubMed

Palley, S L; Sampliner, R E; Garewal, H S

1989-08-01

When Barrett's esophagus is complicated by adenocarcinoma, surgery is indicated in appropriate patients. Until now, high-grade dysplasia in Barrett's esophagus has been managed in a similar fashion. We explore this approach and review reported cases of high-grade dysplasia to suggest guidelines for collection of data to make future clinical decisions more rational.

Ninth Grade Course Enrollment and Dropping Out.

ERIC Educational Resources Information Center

Doss, David A.

An informal study was conducted of the courses selected by ninth grade students who later dropped out of high school. Longitudinal data were available for high school students in the Austin (Texas) Independent School District, from 1978-79 to 1982-83. The courses selected by high-risk students in ninth grade, including extracurricular activities…

ANALYSIS OF VAPORS FROM METHYLENE CHLORIDE EXTRACTS OF NUCLEAR GRADE HEPA FILTER FIBERGLASS SAMPLES

DOE Office of Scientific and Technical Information (OSTI.GOV)

FRYE JM; ANASTOS HL; GUTIERREZ FC

2012-06-07

While several organic compounds were detected in the vapor samples used in the reenactment of the preparation of mounts from the extracts of nuclear grade high-efficiency particulate air filter fiberglass samples, the most significant species present in the samples were methylene chloride, phenol, phenol-d6, and 2-fluorophenol. These species were all known to be present in the extracts, but were expected to have evaporated during the preparation of the mounts, as the mounts appeared to be dry before any vapor was collected. These species were present at the following percentages of their respective occupational exposure limits: methylene chloride, 2%; phenol, 0.4%;more » and phenol-d6, 0.6%. However, there is no established limit for 2-fluorophenol. Several other compounds were detected at low levels for which, as in the case of 2-fluorophenol, there are no established permissible exposure limits. These compounds include 2-chlorophenol; N-nitroso-1-propanamine; 2-fluoro-1,1{prime}-biphenyl; 1,2-dihydroacenaphthylene; 2,5-cyclohexadiene-1,4-dione,2,6-bis(1,1-dimethylethyl); trimethyl oxirane; n-propylpropanamine; 2-(Propylamino)ethanol; 4-methoxy-1-butene; 6-methyl-5-hepten-2-one; and 3,4-dimethylpyridine. Some of these were among those added as surrogates or spike standards as part ofthe Advanced Technologies and Laboratories International, Inc. preparation ofthe extract of the HEPA filter media and are indicated as such in the data tables in Section 2, Results; other compounds found were not previously known to be present. The main inorganic species detected (sulfate, sodium, and sulfur) are also consistent with species added in the preparation of the methylene chloride extract of the high-efficiency particulate air sample.« less

Dispersed solar thermal generation employing parabolic dish-electric transport with field modulated generator systems

NASA Technical Reports Server (NTRS)

Ramakumar, R.; Bahrami, K.

1981-01-01

This paper discusses the application of field modulated generator systems (FMGS) to dispersed solar-thermal-electric generation from a parabolic dish field with electric transport. Each solar generation unit is rated at 15 kWe and the power generated by an array of such units is electrically collected for insertion into an existing utility grid. Such an approach appears to be most suitable when the heat engine rotational speeds are high (greater than 6000 r/min) and, in particular, if they are operated in the variable speed mode and if utility-grade a.c. is required for direct insertion into the grid without an intermediate electric energy storage and reconversion system. Predictions of overall efficiencies based on conservative efficiency figures for the FMGS are in the range of 25 per cent and should be encouraging to those involved in the development of cost-effective dispersed solar thermal power systems.

Direct photolysis of polycyclic aromatic hydrocarbons in drinking water sources.

PubMed

Sanches, S; Leitão, C; Penetra, A; Cardoso, V V; Ferreira, E; Benoliel, M J; Crespo, M T Barreto; Pereira, V J

2011-09-15

The widely used low pressure lamps were tested in terms of their efficiency to degrade polycyclic aromatic hydrocarbons listed as priority pollutants by the European Water Framework Directive and the U.S. Environmental Protection Agency, in water matrices with very different compositions (laboratory grade water, groundwater, and surface water). Using a UV fluence of 1500 mJ/cm(2), anthracene and benzo(a)pyrene were efficiently degraded, with much higher percent removals obtained when present in groundwater (83-93%) compared to surface water (36-48%). The removal percentages obtained for fluoranthene were lower and ranged from 13 to 54% in the different water matrices tested. Several parameters that influence the direct photolysis of polycyclic aromatic hydrocarbons were determined and their photolysis by-products were identified by mass spectrometry. The formation of photolysis by-products was found to be highly dependent on the source waters tested. Copyright © 2011 Elsevier B.V. All rights reserved.

Lignin Based Carbon Materials for Energy Storage Applications

DOE Office of Scientific and Technical Information (OSTI.GOV)

Chatterjee, Sabornie; Saito, Tomonori; Rios, Orlando

The implementation of Li-ion battery technology into electric and hybrid electric vehicles and portable electronic devices such as smart phones, laptops and tablets, creates a demand for efficient, economic and sustainable materials for energy storage. However, the high cost and long processing time associated with manufacturing battery-grade anode and cathode materials are two big constraints for lowering the total cost of batteries and environmentally friendly electric vehicles. Lignin, a byproduct of the pulp and paper industry and biorefinery, is one of the most abundant and inexpensive natural biopolymers. It can be efficiently converted to low cost carbon fibers with optimalmore » properties for use as anode materials. Recent developments in the preparation of lignin precursors and conversion to carbon fiber-based anode materials have created a new class of anode materials with excellent electrochemical characteristics suitable for immediate use in existing Li- or Na-ion battery technologies.« less

Removal of inclusions from silicon

NASA Astrophysics Data System (ADS)

Ciftja, Arjan; Engh, Thorvald Abel; Tangstad, Merete; Kvithyld, Anne; Øvrelid, Eivind Johannes

2009-11-01

The removal of inclusions from molten silicon is necessary to satisfy the purity requirements for solar grade silicon. This paper summarizes two methods that are investigated: (i) settling of the inclusions followed by subsequent directional solidification and (infiltration by ceramic foam filters. Settling of inclusions followed by directional solidification is of industrial importance for production of low-cost solar grade silicon. Filtration is reported as the most efficient method for removal of inclusions from the top-cut silicon scrap.

Discrimination against Students with Foreign Backgrounds: Evidence from Grading in Swedish Public High Schools

ERIC Educational Resources Information Center

Hinnerich, Bjorn Tyrefors; Höglin, Erik; Johannesson, Magnus

2015-01-01

We rigorously test for discrimination against students with foreign backgrounds in high school grading in Sweden. We analyse a random sample of national tests in the Swedish language graded both non-blindly by the student's own teacher and blindly without any identifying information. The increase in the test score due to non-blind grading is…

Predicting Grades in College Courses: A Comparison of Multiple Regression and Percent Succeeding Approaches

ERIC Educational Resources Information Center

Bridgeman, Brent; Pollack, Judith; Burton, Nancy

2008-01-01

Two methods of showing the ability of high school grades (high school grade point averages) and SAT scores to predict cumulative grades in different types of college courses were evaluated in a sample of 26 colleges. Each college contributed data from three cohorts of entering freshmen, and each cohort was followed for at least four years.…

Teacher's Resource Handbook for Asian Studies: An Annotated Bibliography of Curriculum Materials, Preschool through Grade Twelve.

ERIC Educational Resources Information Center

Hawkins, John N.

This handbook is an annotated bibliography of 1,586 instructional materials for teaching about Asia. Existing materials are identified that can be used by precollegiate teachers of all subject areas. The handbook is arranged by grade levels--preschool to grade 3, grades 4-6, junior high, senior high, and ungraded. Within each section, materials…

Lapatinib in Treating Patients With Recurrent and/or Metastatic Adenoid Cystic Cancer or Other Salivary Gland Cancers

ClinicalTrials.gov

2017-03-06

High-grade Salivary Gland Carcinoma; High-grade Salivary Gland Mucoepidermoid Carcinoma; Low-grade Salivary Gland Carcinoma; Low-grade Salivary Gland Mucoepidermoid Carcinoma; Recurrent Adenoid Cystic Carcinoma of the Oral Cavity; Recurrent Salivary Gland Cancer; Salivary Gland Acinic Cell Tumor; Salivary Gland Adenocarcinoma; Salivary Gland Adenoid Cystic Carcinoma; Salivary Gland Malignant Mixed Cell Type Tumor

Predictive Relation between Early Numerical Competencies and Mathematics Achievement in First Grade Portuguese Children.

PubMed

Marcelino, Lilia; de Sousa, Óscar; Lopes, António

2017-01-01

Early numerical competencies (ENC) (counting, number relations, and basic arithmetic operations) have a central position in the initial learning of mathematics, and their assessment is useful for predicting later mathematics achievement. Using a regression model, this study aims to analyze the correlational and predictive evidence between ENC and mathematics achievement in first grade Portuguese children ( n = 123). The children's ENC were examined at the point of school entry. Three criterion groups (low, moderate, and high ENC) were formed based on the results of the early numerical brief screener and mathematics achievement measured at the end of first grade. The following hypotheses were tested: children who started first grade with low numerical competencies remained low mathematics achievement at the end of first grade; and children who started with high numerical competencies, finished the first grade with high mathematics achievement. The results showed that ENC contributed to a significant amount of explained variance in mathematics achievement at the end of the first grade. Children with low numerical competencies performed lower than children with moderate and high numerical competencies. Findings suggest that ENC are meaningful for predicting first-grade mathematics difficulties.

Predictive Relation between Early Numerical Competencies and Mathematics Achievement in First Grade Portuguese Children

PubMed Central

Marcelino, Lilia; de Sousa, Óscar; Lopes, António

2017-01-01

Early numerical competencies (ENC) (counting, number relations, and basic arithmetic operations) have a central position in the initial learning of mathematics, and their assessment is useful for predicting later mathematics achievement. Using a regression model, this study aims to analyze the correlational and predictive evidence between ENC and mathematics achievement in first grade Portuguese children (n = 123). The children’s ENC were examined at the point of school entry. Three criterion groups (low, moderate, and high ENC) were formed based on the results of the early numerical brief screener and mathematics achievement measured at the end of first grade. The following hypotheses were tested: children who started first grade with low numerical competencies remained low mathematics achievement at the end of first grade; and children who started with high numerical competencies, finished the first grade with high mathematics achievement. The results showed that ENC contributed to a significant amount of explained variance in mathematics achievement at the end of the first grade. Children with low numerical competencies performed lower than children with moderate and high numerical competencies. Findings suggest that ENC are meaningful for predicting first-grade mathematics difficulties. PMID:28713308

Nanoscale Graphene Disk: A Natural Functionally Graded Material–How is Fourier’s Law Violated along Radius Direction of 2D Disk

PubMed Central

Yang, Nuo; Hu, Shiqian; Ma, Dengke; Lu, Tingyu; Li, Baowen

2015-01-01

In this Paper, we investigate numerically and analytically the thermal conductivity of nanoscale graphene disks (NGDs), and discussed the possibility to realize functionally graded material (FGM) with only one material, NGDs. Different from previous studies on divergence/non-diffusive of thermal conductivity in nano-structures with different size, we found a novel non-homogeneous (graded) thermal conductivity along the radius direction in a single nano-disk structure. We found that, instead of a constant value, the NGD has a graded thermal conductivity along the radius direction. That is, Fourier’s law of heat conduction is not valid in two dimensional graphene disk structures Moreover, we show the dependent of NGDs’ thermal conductivity on radius and temperature. Our study might inspire experimentalists to develop NGD based versatile FGMs, improve understanding of the heat removal of hot spots on chips, and enhance thermoelectric energy conversion efficiency by two dimensional disk with a graded thermal conductivity. PMID:26443206

Nanoscale Graphene Disk: A Natural Functionally Graded Material-How is Fourier's Law Violated along Radius Direction of 2D Disk.

PubMed

Yang, Nuo; Hu, Shiqian; Ma, Dengke; Lu, Tingyu; Li, Baowen

2015-10-07

In this Paper, we investigate numerically and analytically the thermal conductivity of nanoscale graphene disks (NGDs), and discussed the possibility to realize functionally graded material (FGM) with only one material, NGDs. Different from previous studies on divergence/non-diffusive of thermal conductivity in nano-structures with different size, we found a novel non-homogeneous (graded) thermal conductivity along the radius direction in a single nano-disk structure. We found that, instead of a constant value, the NGD has a graded thermal conductivity along the radius direction. That is, Fourier's law of heat conduction is not valid in two dimensional graphene disk structures Moreover, we show the dependent of NGDs' thermal conductivity on radius and temperature. Our study might inspire experimentalists to develop NGD based versatile FGMs, improve understanding of the heat removal of hot spots on chips, and enhance thermoelectric energy conversion efficiency by two dimensional disk with a graded thermal conductivity.

A current drive by using the fast wave in frequency range higher than two timeslower hybrid resonance frequency on tokamaks

NASA Astrophysics Data System (ADS)

Kim, Sun Ho; Hwang, Yong Seok; Jeong, Seung Ho; Wang, Son Jong; Kwak, Jong Gu

2017-10-01

An efficient current drive scheme in central or off-axis region is required for the steady state operation of tokamak fusion reactors. The current drive by using the fast wave in frequency range higher than two times lower hybrid resonance (w>2wlh) could be such a scheme in high density, high temperature reactor-grade tokamak plasmas. First, it has relatively higher parallel electric field to the magnetic field favorable to the current generation, compared to fast waves in other frequency range. Second, it can deeply penetrate into high density plasmas compared to the slow wave in the same frequency range. Third, parasitic coupling to the slow wave can contribute also to the current drive avoiding parametric instability, thermal mode conversion and ion heating occured in the frequency range w<2wlh. In this study, the propagation boundary, accessibility, and the energy flow of the fast wave are given via cold dispersion relation and group velocity. The power absorption and current drive efficiency are discussed qualitatively through the hot dispersion relation and the polarization. Finally, those characteristics are confirmed with ray tracing code GENRAY for the KSTAR plasmas.

Efficiency of Oral Incremental Rehearsal versus Written Incremental Rehearsal on Students' Rate, Retention, and Generalization of Spelling Words

ERIC Educational Resources Information Center

Garcia, Dru; Joseph, Laurice M.; Alber-Morgan, Sheila; Konrad, Moira

2014-01-01

The purpose of this study was to examine the efficiency of an incremental rehearsal oral versus an incremental rehearsal written procedure on a sample of primary grade children's weekly spelling performance. Participants included five second and one first grader who were in need of help with their spelling according to their teachers. An…

Comparing the Efficiency of Repeated Reading and Listening-While-Reading to Improve Fluency and Comprehension

ERIC Educational Resources Information Center

Hawkins, Renee O.; Marsicano, Richard; Schmitt, Ara J.; McCallum, Elizabeth; Musti-Rao, Shobana

2015-01-01

An alternating treatments design was used to compare the effects of two reading fluency interventions on the oral reading fluency and maze accuracy of four fourth-grade students. Also, by taking into account time spent in intervention, the efficiency of the two interventions was compared. In the adult-mediated repeated reading (RR) condition,…

Improving hole injection and carrier distribution in InGaN light-emitting diodes by removing the electron blocking layer and including a unique last quantum barrier

DOE Office of Scientific and Technical Information (OSTI.GOV)

Cheng, Liwen, E-mail: lwcheng@yzu.edu.cn; Chen, Haitao; Wu, Shudong

2015-08-28

The effects of removing the AlGaN electron blocking layer (EBL), and using a last quantum barrier (LQB) with a unique design in conventional blue InGaN light-emitting diodes (LEDs), were investigated through simulations. Compared with the conventional LED design that contained a GaN LQB and an AlGaN EBL, the LED that contained an AlGaN LQB with a graded-composition and no EBL exhibited enhanced optical performance and less efficiency droop. This effect was caused by an enhanced electron confinement and hole injection efficiency. Furthermore, when the AlGaN LQB was replaced with a triangular graded-composition, the performance improved further and the efficiency droopmore » was lowered. The simulation results indicated that the enhanced hole injection efficiency and uniform distribution of carriers observed in the quantum wells were caused by the smoothing and thinning of the potential barrier for the holes. This allowed a greater number of holes to tunnel into the quantum wells from the p-type regions in the proposed LED structure.« less

Electrical power production from low-grade waste heat using a thermally regenerative ethylenediamine battery

NASA Astrophysics Data System (ADS)

Rahimi, Mohammad; D'Angelo, Adriana; Gorski, Christopher A.; Scialdone, Onofrio; Logan, Bruce E.

2017-05-01

Thermally regenerative ammonia-based batteries (TRABs) have been developed to harvest low-grade waste heat as electricity. To improve the power production and anodic coulombic efficiency, the use of ethylenediamine as an alternative ligand to ammonia was explored here. The power density of the ethylenediamine-based battery (TRENB) was 85 ± 3 W m-2-electrode area with 2 M ethylenediamine, and 119 ± 4 W m-2 with 3 M ethylenediamine. This power density was 68% higher than that of TRAB. The energy density was 478 Wh m-3-anolyte, which was ∼50% higher than that produced by TRAB. The anodic coulombic efficiency of the TRENB was 77 ± 2%, which was more than twice that obtained using ammonia in a TRAB (35%). The higher anodic efficiency reduced the difference between the anode dissolution and cathode deposition rates, resulting in a process more suitable for closed loop operation. The thermal-electric efficiency based on ethylenediamine separation using waste heat was estimated to be 0.52%, which was lower than that of TRAB (0.86%), mainly due to the more complex separation process. However, this energy recovery could likely be improved through optimization of the ethylenediamine separation process.

Thalamic diffusion differences related to cognitive function in white matter lesions.

PubMed

Fernández-Andújar, Marina; Soriano-Raya, Juan José; Miralbell, Júlia; López-Cancio, Elena; Cáceres, Cynthia; Bargalló, Núria; Barrios, Maite; Arenillas, Juan Francisco; Toran, Pere; Alzamora, Maite; Clemente, Imma; Dávalos, Antoni; Mataró, Maria

2014-05-01

Cerebral white matter lesions (WMLs) are related to cognitive deficits, probably due to a disruption of frontal-subcortical circuits. We explored thalamic diffusion differences related to white matter lesions (WMLs) and their association with cognitive function in middle-aged individuals. Ninety-six participants from the Barcelona-AsIA Neuropsychology Study were included. Participants were classified into groups based on low grade and high grade of periventricular hyperintensities (PVHs) and deep white matter hyperintensities (DWMHs). Tract-Based Spatial Statistics was used to study thalamic diffusion differences between groups. Mean fractional anisotropy (FA) values in significant areas were calculated for each subject and correlated with cognitive performance. Participants with high-grade PVHs and DWMHs showed lower FA thalamic values compared to those with low-grade PVHs and DWMHs, respectively. Decreased FA thalamic values in high-grade DWMHs, but not high-grade PVH, were related to lower levels of performance in psychomotor speed, verbal fluency, and visuospatial skills. Thalamic diffusion differences are related to lower cognitive function only in participants with high-grade DWMHs. These results support the hypothesis that fronto-subcortical disruption is associated with cognitive function only in DWMHs. Copyright © 2014 Elsevier Inc. All rights reserved.

Effect of Lower Anogenital Squamous Terminology Recommendations on the Use of p16 Immunohistochemistry and the Proportion of High-Grade Diagnoses in Cervical Biopsy Specimens.

PubMed

Thrall, Michael J

2016-04-01

The Lower Anogenital Squamous Terminology (LAST) group has recommended that cervical intraepithelial neoplasia (CIN) terminology be replaced by squamous intraepithelial lesion (SIL) terminology, with p16 immunohistochemistry used to separate lesions formerly diagnosed as CIN grade 2 into high-grade SILs (HSILs) and low-grade SILs. This study investigated the impact of these changes on the frequency of p16 testing and the diagnosis of high-grade lesions. Pathology reports for all cervical biopsy specimens in the 1 year before and after the introduction of LAST recommendations (July 2011 to June 2013) were examined. Before and after the implementation of LAST, 365 (15.4%) of 2,376 cases were diagnosed as high grade (CIN 2/3) vs 486 (17.6%) of 2,761 cases diagnosed as HSILs (P = .0343), and p16 was performed 79 (3.3%) times vs 383 (13.9%) times (P < .0001). Immunohistochemistry for p16 increased dramatically as a result of LAST recommendations, and high-grade diagnoses increased. © American Society for Clinical Pathology, 2016. All rights reserved. For permissions, please e-mail: journals.permissions@oup.com.

A Review of Autologous Stem Cell Transplantation in Lymphoma.

PubMed

Zahid, Umar; Akbar, Faisal; Amaraneni, Akshay; Husnain, Muhammad; Chan, Onyee; Riaz, Irbaz Bin; McBride, Ali; Iftikhar, Ahmad; Anwer, Faiz

2017-06-01

Chemotherapy remains the first-line therapy for aggressive lymphomas. However, 20-30% of patients with non-Hodgkin lymphoma (NHL) and 15% with Hodgkin lymphoma (HL) recur after initial therapy. We want to explore the role of high-dose chemotherapy (HDT) and autologous stem cell transplant (ASCT) for these patients. There is some utility of upfront consolidation for-high risk/high-grade B-cell lymphoma, mantle cell lymphoma, and T-cell lymphoma, but there is no role of similar intervention for HL. New conditioning regimens are being investigated which have demonstrated an improved safety profile without compromising the myeloablative efficiency for relapsed or refractory HL. Salvage chemotherapy followed by HDT and rescue autologous stem cell transplant remains the standard of care for relapsed/refractory lymphoma. The role of novel agents to improve disease-related parameters remains to be elucidated in frontline induction, disease salvage, and high-dose consolidation or in the maintenance setting.

Correlation between Urothelial Differentiation and Sensory Proteins P2X3, P2X5, TRPV1, and TRPV4 in Normal Urothelium and Papillary Carcinoma of Human Bladder

PubMed Central

Sterle, Igor; Zupančič, Daša; Romih, Rok

2014-01-01

Terminal differentiation of urothelium is a prerequisite for blood-urine barrier formation and enables normal sensory function of the urinary bladder. In this study, urothelial differentiation of normal human urothelium and of low and high grade papillary urothelial carcinomas was correlated with the expression and localization of purinergic receptors (P2X3, and P2X5) and transient receptor potential vanilloid channels (TRPV1, and TRPV4). Western blotting and immunofluorescence of uroplakins together with scanning electron microscopy of urothelial apical surface demonstrated terminal differentiation of normal urothelium, partial differentiation of low grade carcinoma, and poor differentiation of high grade carcinoma. P2X3 was expressed in normal urothelium as well as in low grade carcinoma and in both cases immunolabeling was stronger in the superficial cells. P2X3 expression decreased in high grade carcinoma. P2X5 expression was detected in normal urothelium and in high grade carcinoma, while in low grade carcinoma its expression was diminished. The expression of TRPV1 decreased in low grade and even more in high grade carcinoma when compared with normal urothelium, while TRPV4 expression was unchanged in all samples. Our results suggest that sensory proteins P2X3 and TRPV1 are in correlation with urothelial differentiation, while P2X5 and TRPV4 have unique expression patterns. PMID:24868547

Correlation between urothelial differentiation and sensory proteins P2X3, P2X5, TRPV1, and TRPV4 in normal urothelium and papillary carcinoma of human bladder.

PubMed

Sterle, Igor; Zupančič, Daša; Romih, Rok

2014-01-01

Terminal differentiation of urothelium is a prerequisite for blood-urine barrier formation and enables normal sensory function of the urinary bladder. In this study, urothelial differentiation of normal human urothelium and of low and high grade papillary urothelial carcinomas was correlated with the expression and localization of purinergic receptors (P2X3, and P2X5) and transient receptor potential vanilloid channels (TRPV1, and TRPV4). Western blotting and immunofluorescence of uroplakins together with scanning electron microscopy of urothelial apical surface demonstrated terminal differentiation of normal urothelium, partial differentiation of low grade carcinoma, and poor differentiation of high grade carcinoma. P2X3 was expressed in normal urothelium as well as in low grade carcinoma and in both cases immunolabeling was stronger in the superficial cells. P2X3 expression decreased in high grade carcinoma. P2X5 expression was detected in normal urothelium and in high grade carcinoma, while in low grade carcinoma its expression was diminished. The expression of TRPV1 decreased in low grade and even more in high grade carcinoma when compared with normal urothelium, while TRPV4 expression was unchanged in all samples. Our results suggest that sensory proteins P2X3 and TRPV1 are in correlation with urothelial differentiation, while P2X5 and TRPV4 have unique expression patterns.

Carmustine wafer implantation for high-grade gliomas: Evidence-based safety efficacy and practical recommendations from the Neuro-oncology Club of the French Society of Neurosurgery.

PubMed

Roux, A; Caire, F; Guyotat, J; Menei, P; Metellus, P; Pallud, J

2017-12-01

There is a growing body of evidence that carmustine wafer implantation during surgery is an effective therapeutic adjunct to the standard combined radio-chemotherapy regimen using temozolomide in newly diagnosed and recurrent high-grade glioma patient management with a statistically significant survival benefit demonstrated across several randomized clinical trials, as well as prospective and retrospective studies (grade A recommendation). Compelling clinical data also support the safety of carmustine wafer implantation (grade A recommendation) in these patients and suggest that observed adverse events can be avoided in experienced neurosurgeon hands. Furthermore, carmustine wafer implantation does not seem to impact negatively on the quality of life and the completion of adjuvant oncological treatments (grade C recommendation). Moreover, emerging findings support the potential of high-grade gliomas molecular status, especially the O(6)-Methylguanine-DNA Methyltransferase promoter methylation status, in predicting the efficacy of such a surgical strategy, especially at recurrence (grade B recommendation). Finally, carmustine wafer implantation appears to be cost-effective in high-grade glioma patients when performed by an experienced team and when total or subtotal resection can be achieved. Altogether, these data underline the current need for a new randomized clinical trial to assess the impact of a maximal safe resection with carmustine wafer implantation followed by the standard combined chemoradiation protocol stratified by molecular status in high-grade glioma patients. Copyright © 2017 Elsevier Masson SAS. All rights reserved.

Prediction of tumor differentiation using sequential PET/CT and MRI in patients with breast cancer.

PubMed

Choi, Joon Ho; Lim, Ilhan; Noh, Woo Chul; Kim, Hyun-Ah; Seong, Min-Ki; Jang, Seonah; Seol, Hyesil; Moon, Hansol; Byun, Byung Hyun; Kim, Byung Il; Choi, Chang Woon; Lim, Sang Moo

2018-05-23

The aim of this study is to assess tumor differentiation using parameters from sequential positron emission tomography/computed tomography (PET/CT) and magnetic resonance imaging (MRI) in patients with breast cancer. This retrospective study included 78 patients with breast cancer. All patients underwent sequential PET/CT and MRI. For fluorodeoxyglucose (FDG)-PET image analysis, the maximum standardized uptake value (SUV max ) of FDG was assessed at both 1 and 2 h and metabolic tumor volume (MTV) and total lesion glycolysis (TLG). The kinetic analysis of dynamic contrast-enhanced MRI parameters was performed using dynamic enhancement curves. We assessed diffusion-weighted imaging (DWI)-MRI parameters regarding apparent diffusion coefficient (ADC) values. Histologic grades 1 and 2 were classified as low-grade, and grade 3 as high-grade tumor. Forty-five lesions of 78 patients were classified as histologic grade 3, while 26 and 7 lesions were grade 2 and grade 1, respectively. Patients with high-grade tumors showed significantly lower ADC-mean values than patients with low-grade tumors (0.99 ± 0.19 vs.1.12 ± 0.32, p = 0.007). With respect to SUV max 1, MTV2.5, and TLG2.5, patients with high-grade tumors showed higher values than patients with low-grade tumors: SUV max 1 (7.92 ± 4.5 vs.6.19 ± 3.05, p = 0.099), MTV2.5 (7.90 ± 9.32 vs.4.38 ± 5.10, p = 0.095), and TLG2.5 (40.83 ± 59.17 vs.19.66 ± 26.08, p = 0.082). However, other parameters did not reveal significant differences between low-grade and high-grade malignancies. In receiver-operating characteristic (ROC) curve analysis, ADC-mean values showed the highest area under the curve of 0.681 (95%CI 0.566-0.782) for assessing high-grade malignancy. Lower ADC-mean values may predict the poor differentiation of breast cancer among diverse PET-MRI functional parameters.

Management of Pediatric Spinal Cord Astrocytomas: Outcomes With Adjuvant Radiation

DOE Office of Scientific and Technical Information (OSTI.GOV)

Guss, Zachary D.; Moningi, Shalini; Jallo, George I.

2013-04-01

Purpose: Pediatric intramedullary spinal cord tumors are exceedingly rare; in the United States, 100 to 200 cases are recognized annually, of these, most are astrocytomas. The purpose of this study is to report the outcomes in pediatric patients with spinal cord astrocytomas treated at a tertiary care center. Methods and Materials: An institutional review board-approved retrospective single-institution study was performed for pediatric patients with spinal cord astrocytomas treated at our hospital from 1990 to 2010. The patients were evaluated on the extent of resection, progression-free survival (PFS), and development of radiation-related toxicities. Kaplan-Meier curves and multivariate regression model methods weremore » used for analysis. Results: Twenty-nine patients were included in the study, 24 with grade 1 or 2 (low-grade) tumors and 5 with grade 3 or 4 (high-grade) tumors. The median follow-up time was 55 months (range, 1-215 months) for patients with low-grade tumors and 17 months (range, 10-52 months) for those with high-grade tumors. Thirteen patients in the cohort received chemotherapy. All patients underwent at least 1 surgical resection. Twelve patients received radiation therapy to a median radiation dose of 47.5 Gy (range, 28.6-54.0 Gy). Fifteen patients with low-grade tumors and 1 patient with a high-grade tumor exhibited stable disease at the last follow-up visit. Acute toxicities of radiation therapy were low grade, whereas long-term sequelae were infrequent and manageable when they arose. All patients with low-grade tumors were alive at the last follow-up visit, compared with 1 patient with a high-grade tumor. Conclusion: Primary pediatric spinal cord astrocytomas vary widely in presentation and clinical course. Histopathologic grade remains a major prognostic factor. Patients with low-grade tumors tend to have excellent disease control and long-term survival compared to those with high-grade tumors. This experience suggests that radiation therapy may enhance tumor control with an acceptably low risk of long-term sequelae in this sensitive patient population.« less

Medical interventions for high grade vulval intraepithelial neoplasia

PubMed Central

Pepas, Litha; Kaushik, Sonali; Bryant, Andrew; Nordin, Andy; Dickinson, Heather O

2014-01-01

Background Vulval intraepithelial neoplasia (VIN) is a pre-malignant condition of the vulval skin; its incidence is increasing in women under 50 years. VIN is graded histologically as low grade or high grade. High grade VIN is associated with infection with human papilloma virus (HPV) infection and may progress to invasive disease. There is no consensus on the optimal management of high grade VIN. The high morbidity and high relapse rate associated with surgical interventions call for a formal appraisal of the evidence available for less invasive but effective interventions for high grade VIN. Objectives To evaluate the effectiveness and safety of medical interventions for high grade VIN. Search methods We searched the Cochrane Gynaecological Cancer Group Trials Register, Cochrane Central Register of Controlled Trials (CENTRAL) (The Cochrane Library 2010, Issue 3), MEDLINE and EMBASE (up to September 2010). We also searched registers of clinical trials, abstracts of scientific meetings, reference lists of included studies and contacted experts in the field. Selection criteria Randomised controlled trials (RCTs) that assessed medical interventions, in adult women diagnosed with high grade VIN. Data collection and analysis Two review authors independently abstracted data and assessed risk of bias. Where possible the data were synthesised in a meta-analysis. Main results Four trials met our inclusion criteria: three assessed the effectiveness of topical imiquimod versus placebo in women with high grade VIN; one examined low versus high dose indole-3-carbinol in similar women. Meta-analysis of three trials found that the proportion of women who responded to treatment at 5 to 6 months was much higher in the group who received topical imiquimod than in the group who received placebo (relative risk (RR) = 11.95, 95% confidence interval (CI) 3.21 to 44.51). A single trial showed similar results at 12 months in (RR = 9.10, 95% CI 2.38 to 34.77). Only one trial reported adverse events, which were more common in the imiquimod group. One trial found no significant differences in quality of life (QoL) or body image between the imiquimod and placebo groups. Authors’ conclusions Imiquimod appears to be effective, but its safety needs further examination. Its use is associated with side effects which are tolerable, but more extensive data on adverse effects are required. Long term follow-up should be mandatory in view of the known progression of high grade VIN to invasive disease. Alternative medical interventions, such as cidofovir, should be explored. PMID:21491403

Heating boilers in Krakow, Poland: Options for improving efficiency and reducing emissions

DOE Office of Scientific and Technical Information (OSTI.GOV)

Cyklis, P.; Kowalski, J.; Kroll, J.

1995-08-01

In Krakow, Poland, coal-fired boilers are used to heat single apartment buildings and local heating districts. The population includes 2,930 small, hand-fired boilers and 227 larger traveling grate stoker-fired boilers. These boilers are important contributors to air quality problems in Krakow, and an assessment of their efficiency and emissions characteristics was recently undertaken. For the larger, stoker-fired boilers, efficiency was measured using a stack-loss method. In addition to the normal baseline fuel, the effects of coal cleaning and grading were evaluated. Testing was done at two selected sites. Boiler efficiencies were found to be low--50% to 67%. These boilers operatemore » without combustion controls or instrumentation for flue gas analysis. As a result, excess air levels are very high--up to 400%--leading to poor performance. Emissions were found to be typical for boilers of this type. Using the improved fuels yields reductions in emissions and improvement in efficiency when combined with proper adjustments. In the case of the hand-fired boilers, one set of cast-iron boilers and one set of steel boilers were tested. Efficiency in this case was measured using an input-output method for sets of three boilers taken together as a system. Emissions from these boilers are lowest when low volatile fuels, such as coke or smokeless briquettes, are used.« less

Alleviation of efficiency droop in InGaN/GaN multiple quantum well light-emitting diodes with trapezoidal quantum barriers

NASA Astrophysics Data System (ADS)

Kim, Sang-Jo; Lee, Kwang Jae; Park, Seong-Ju

2018-06-01

We numerically investigated the effects of trapezoidal quantum barriers (QBs) on efficiency droop in InGaN/GaN multiple quantum well (MQW) light-emitting diodes (LEDs). Simulations showed that the electrostatic field in QWs of LEDs with trapezoidal barriers is reduced because of the reduced sheet charge density at the QW-QB interface caused by the thin GaN layer in trapezoidal QBs. Additionally, the InGaN grading region in trapezoidal QBs suppresses hot carrier transport and this enhances efficient carrier injection into the QWs. The electroluminescence intensity of an LED with trapezoidal QBs is increased by 10.2% and 6.7% at 245 A cm‑2 when compared with the intensities of LEDs with square-type GaN barriers and multilayer barriers, respectively. The internal quantum efficiency (IQE) droop of an LED with trapezoidal QBs is 16% at 300 A cm‑2, while LEDs with square-type GaN barriers and multilayer barriers have IQE droop of 31% and 24%, respectively. This IQE droop alleviation in LEDs with trapezoidal QBs is attributed to the reduced energy band bending, efficient hole injection, and more uniform hole distribution in the MQWs that results from reduction of the piezoelectric field by the trapezoidal QBs. These results indicate that the trapezoidal QB in MQWs is promising for enhanced efficiency in high-power GaN-based LEDs.

Social and Academic Expectations about High School for At-Risk Rural Youth

ERIC Educational Resources Information Center

Stein, Gabriela Livas; Hussong, Andrea

2007-01-01

This study examines high school expectancies in a sample of at-risk, rural youth, and how these expectancies relate to 8th grade functioning, 9th grade functioning, and 9th grade experiences of high school. A total of 76 eighth-graders and their parents, drawn from a larger study of the transition to high school, participated in interviews the…

Relationship among performance, carcass, and feed efficiency characteristics, and their ability to predict economic value in the feedlot.

PubMed

Retallick, K M; Faulkner, D B; Rodriguez-Zas, S L; Nkrumah, J D; Shike, D W

2013-12-01

A 4-yr study was conducted using 736 steers of known Angus, Simmental, or Simmental × Angus genetics to determine performance, carcass, and feed efficiency factors that explained variation in economic performance. Steers were pen fed and individual DMI was recorded using a GrowSafe automated feeding system (GrowSafe Systems Ltd., Airdrie, Alberta, Canada). Steers consumed a similar diet and received similar management each year. The objectives of this study were to: 1) determine current economic value of feed efficiency and 2) identify performance, carcass, and feed efficiency characteristics that predict: carcass value, profit, cost of gain, and feed costs. Economic data used were from 2011 values. Feed efficiency values investigated were: feed conversion ratio (FCR; feed to gain), residual feed intake (RFI), residual BW gain (RG), and residual intake and BW gain (RIG). Dependent variables were carcass value ($/steer), profit ($/steer), feed costs ($/steer • d(-1)), and cost of gain ($/kg). Independent variables were year, DMI, ADG, HCW, LM area, marbling, yield grade, dam breed, and sire breed. A 10% improvement in RG (P < 0.05) yielded the lowest cost of gain at $0.09/kg and highest carcass value at $17.92/steer. Carcass value increased (P < 0.05) as feed efficiency improved for FCR, RG, and RIG. Profit increased with a 10% improvement in feed efficiency (P < 0.05) with FCR at $34.65/steer, RG at $31.21/steer, RIG at $21.66/steer, and RFI at $11.47/steer. The carcass value prediction model explained 96% of the variation among carcasses and included HCW, marbling score, and yield grade. Average daily gain, marbling score, yield grade, DMI, HCW, and year born constituted 81% of the variation for prediction of profit. Eighty-five percent of the variation in cost of gain was explained by ADG, DMI, HCW, and year. Prediction equations were developed that excluded ADG and DMI, and included feed efficiency values. Using these equations, cost of gain was explained primarily by FCR (R(2) = 0.71). Seventy-three percent of profitability was explained, with 55% being accounted for by RG and marbling. These prediction equations represent the relative importance of factors contributing to economic success in feedlot cattle based on current prices.

Collimated thermal radiation transfer via half Maxwell's fish-eye lens for thermophotovoltaics

NASA Astrophysics Data System (ADS)

Chung, Haejun; Zhou, Zhiguang; Bermel, Peter

2017-05-01

Thermophotovoltaics (TPV) convert heat into electricity by capturing thermal radiation with a photovoltaic (PV) cell, ideally at efficiencies of 50% or more. However, excess heating of the PV cell from close proximity to the emitter substantially reduces the system efficiency. In this work, we theoretically develop and numerically demonstrate an approach to fundamentally improving TPV systems that allow for a much greater separation of an emitter and a receiver. Thus, we solve the excess heating dilemma, required for achieving theoretically high efficiencies. It consists of a spherically graded index lens known as Maxwell's Fish-Eye (MFE) structure, capable of collimating hemispherical emission into a much narrower range of angles, close to the normal direction. To fully characterize the power radiation profile of the MFE, we perform finite-difference time-domain simulations for a quarter MFE and then map it onto a Gaussian beam approximation. The modeled beam properties are subsequently used to study a half MFE. In an optimized half MFE design, 90% of all thermal photons reach a receiver at a distance of 100 λ; by comparison, only 15.6% of a blackbody emitter reach a receiver in the same geometry. It is also shown that the emission achieved by a half MFE can lead to a photon recycling rate above 95% for below bandgap photons at an emitter-receiver separation of 100 λ. By applying a half MFE, the absolute TPV efficiency can be improved from 5.74% to 37.15%, which represents a significant step forward in realizing high-efficiency TPV systems.

Electronic structure descriptor for the discovery of narrow-band red-emitting phosphors

DOE PAGES

Wang, Zhenbin; Chu, Iek -Heng; Zhou, Fei; ...

2016-05-09

Narrow-band red-emitting phosphors are a critical component of phosphor-converted light-emitting diodes for highly efficient illumination-grade lighting. In this work, we report the discovery of a quantitative descriptor for narrow-band Eu 2+-activated emission identified through a comparison of the electronic structures of known narrow-band and broad-band phosphors. We find that a narrow emission bandwidth is characterized by a large splitting of more than 0.1 eV between the two highest Eu 2+ 4 f 7 bands. By incorporating this descriptor in a high-throughput first-principles screening of 2259 nitride compounds, we identify five promising new nitride hosts for Eu 2+-activated red-emitting phosphors thatmore » are predicted to exhibit good chemical stability, thermal quenching resistance, and quantum efficiency, as well as narrow-band emission. Lastly, our findings provide important insights into the emission characteristics of rare-earth activators in phosphor hosts and a general strategy to the discovery of phosphors with a desired emission peak and bandwidth.« less

Thermionic Energy Conversion Based on Graphene van der Waals Heterostructures

PubMed Central

Liang, Shi-Jun; Liu, Bo; Hu, Wei; Zhou, Kun; Ang, L. K.

2017-01-01

Seeking for thermoelectric (TE) materials with high figure of merit (or ZT), which can directly converts low-grade wasted heat (400 to 500 K) into electricity, has been a big challenge. Inspired by the concept of multilayer thermionic devices, we propose and design a solid-state thermionic devices (as a power generator or a refrigerator) in using van der Waals (vdW) heterostructure sandwiched between two graphene electrodes, to achieve high energy conversion efficiency in the temperature range of 400 to 500 K. The vdW heterostructure is composed of suitable multiple layers of transition metal dichalcogenides (TMDs), such as MoS2, MoSe2, WS2 and WSe2. From our calculations, WSe2 and MoSe2 are identified as two ideal TMDs (using the reported experimental material’s properties), which can harvest waste heat at 400 K with efficiencies about 7% to 8%. To our best knowledge, this design is the first in combining the advantages of graphene electrodes and TMDs to function as a thermionic-based device. PMID:28387363

Electronic structure descriptor for the discovery of narrow-band red-emitting phosphors

DOE Office of Scientific and Technical Information (OSTI.GOV)

Wang, Zhenbin; Chu, Iek -Heng; Zhou, Fei

Narrow-band red-emitting phosphors are a critical component of phosphor-converted light-emitting diodes for highly efficient illumination-grade lighting. In this work, we report the discovery of a quantitative descriptor for narrow-band Eu 2+-activated emission identified through a comparison of the electronic structures of known narrow-band and broad-band phosphors. We find that a narrow emission bandwidth is characterized by a large splitting of more than 0.1 eV between the two highest Eu 2+ 4 f 7 bands. By incorporating this descriptor in a high-throughput first-principles screening of 2259 nitride compounds, we identify five promising new nitride hosts for Eu 2+-activated red-emitting phosphors thatmore » are predicted to exhibit good chemical stability, thermal quenching resistance, and quantum efficiency, as well as narrow-band emission. Lastly, our findings provide important insights into the emission characteristics of rare-earth activators in phosphor hosts and a general strategy to the discovery of phosphors with a desired emission peak and bandwidth.« less

Virtual reality microscope versus conventional microscope regarding time to diagnosis: an experimental study.

PubMed

Randell, Rebecca; Ruddle, Roy A; Mello-Thoms, Claudia; Thomas, Rhys G; Quirke, Phil; Treanor, Darren

2013-01-01

  To create and evaluate a virtual reality (VR) microscope that is as efficient as the conventional microscope, seeking to support the introduction of digital slides into routine practice.   A VR microscope was designed and implemented by combining ultra-high-resolution displays with VR technology, techniques for fast interaction, and high usability. It was evaluated using a mixed factorial experimental design with technology and task as within-participant variables and grade of histopathologist as a between-participant variable. Time to diagnosis was similar for the conventional and VR microscopes. However, there was a significant difference in the mean magnification used between the two technologies, with participants working at a higher level of magnification on the VR microscope.   The results suggest that, with the right technology, efficient use of digital pathology for routine practice is a realistic possibility. Further work is required to explore what magnification is required on the VR microscope for histopathologists to identify diagnostic features, and the effect on this of the digital slide production process. © 2012 Blackwell Publishing Limited.

Non-operative management versus operative management in high-grade blunt hepatic injury.

PubMed

Cirocchi, Roberto; Trastulli, Stefano; Pressi, Eleonora; Farinella, Eriberto; Avenia, Stefano; Morales Uribe, Carlos Hernando; Botero, Ana Maria; Barrera, Luis M

2015-08-24

Surgery used to be the treatment of choice in cases of blunt hepatic injury, but this approach gradually changed over the last two decades as increasing non-operative management (NOM) of splenic injury led to its use for hepatic injury. The improvement in critical care monitoring and computed tomographic scanning, as well as the more frequent use of interventional radiology techniques, has helped to bring about this change to non-operative management. Liver trauma ranges from a small capsular tear, without parenchymal laceration, to massive parenchymal injury with major hepatic vein/retrohepatic vena cava lesions. In 1994, the Organ Injury Scaling Committee of the American Association for the Surgery of Trauma (AAST) revised the Hepatic Injury Scale to have a range from grade I to VI. Minor injuries (grade I or II) are the most frequent liver injuries (80% to 90% of all cases); severe injuries are grade III-V lesions; grade VI lesions are frequently incompatible with survival. In the medical literature, the majority of patients who have undergone NOM have low-grade liver injuries. The safety of NOM in high-grade liver lesions, AAST grade IV and V, remains a subject of debate as a high incidence of liver and collateral extra-abdominal complications are still described. To assess the effects of non-operative management compared to operative management in high-grade (grade III-V) blunt hepatic injury. The search for studies was run on 14 April 2014. We searched the Cochrane Injuries Group's Specialised Register, The Cochrane Library, Ovid MEDLINE(R), Ovid MEDLINE(R) In-Process & Other Non-Indexed Citations, Ovid MEDLINE(R) Daily and Ovid OLDMEDLINE(R), Embase Classic+Embase (Ovid), PubMed, ISI WOS (SCI-EXPANDED, SSCI, CPCI-S & CPSI-SSH), clinical trials registries, conference proceedings, and we screened reference lists. All randomised trials that compare non-operative management versus operative management in high-grade blunt hepatic injury. Two authors independently applied the selection criteria to relevant study reports. We used standard methodological procedures as defined by the Cochrane Collaboration. We were unable to find any randomised controlled trials of non-operative management versus operative management in high-grade blunt hepatic injury. In order to further explore the preliminary findings provided by animal models and observational clinical studies that suggests there may be a beneficial effect of non-operative management versus operative management in high-grade blunt hepatic injury, large, high quality randomised trials are needed.

How Does the Severity of Injury Vary between Motorcycle and Automobile Accident Victims Who Sustain High-Grade Blunt Hepatic and/or Splenic Injuries? Results of a Retrospective Analysis.

PubMed

Hsieh, Ting-Min; Tsai, Tsung-Cheng; Liu, Yueh-Wei; Hsieh, Ching-Hua

2016-07-21

High-grade blunt hepatic and/or splenic injuries (BHSI) remain a great challenge for trauma surgeons. The main aim of this study was to investigate the characteristics, mortality rates, and outcomes of high-grade BHSI in motorcyclists and car occupants hospitalized for treatment of traumatic injuries in a Level I trauma center in southern Taiwan. High-grade BHSI are defined as grade III-VI blunt hepatic injuries and grade III-V blunt splenic injuries. This retrospective study reviewed the data of 101 motorcyclists and 32 car occupants who experienced a high-grade BHSI from 1 January 2011 to 31 December 2013. Two-sided Fisher's exact or Pearson's chi-square tests were used to compare categorical data, unpaired Student's t-test was used to analyze normally distributed continuous data, and Mann-Whitney's U test was used to compare non-normally distributed data. In this study, the majority (76%, 101/133) of high-grade BHSI were due to motorcycle crashes. Car occupants had a significantly higher injury severity score (ISS; 26.8 ± 10.9 vs. 20.7 ± 10.4, respectively, p = 0.005) and organ injured score (OIS; 3.8 ± 1.0 vs. 3.4 ± 0.6, respectively, p = 0.033), as well as a significantly longer hospital length of stay (LOS; 21.2 days vs. 14.6 days, respectively, p = 0.038) than did motorcyclists. Car occupants with high-grade BHSI also had worse clinical presentations than their motorcyclist counterparts, including a significantly higher incidence of hypotension, hyperpnea, tube thoracostomy, blood transfusion >4 units, LOS in intensive care unit >5 days, and complications. However, there were no differences in the percentage of angiography or laparotomy performed or mortality rate between these two groups of patients. This study demonstrated that car occupants with high-grade BHSI were injured more severely, had a higher incidence of worse clinical presentation, had a longer hospital LOS, and had a higher incidence of complications than motorcyclists. The results also implied that specific attention should be paid to those car occupants with high-grade BHSI, whose critical condition should not be underestimated because of the concept that the patients within in a car are much safer.

How Does the Severity of Injury Vary between Motorcycle and Automobile Accident Victims Who Sustain High-Grade Blunt Hepatic and/or Splenic Injuries? Results of a Retrospective Analysis

PubMed Central

Hsieh, Ting-Min; Tsai, Tsung-Cheng; Liu, Yueh-Wei; Hsieh, Ching-Hua

2016-01-01

Background: High-grade blunt hepatic and/or splenic injuries (BHSI) remain a great challenge for trauma surgeons. The main aim of this study was to investigate the characteristics, mortality rates, and outcomes of high-grade BHSI in motorcyclists and car occupants hospitalized for treatment of traumatic injuries in a Level I trauma center in southern Taiwan. Methods: High-grade BHSI are defined as grade III-VI blunt hepatic injuries and grade III-V blunt splenic injuries. This retrospective study reviewed the data of 101 motorcyclists and 32 car occupants who experienced a high-grade BHSI from 1 January 2011 to 31 December 2013. Two-sided Fisher’s exact or Pearson’s chi-square tests were used to compare categorical data, unpaired Student’s t-test was used to analyze normally distributed continuous data, and Mann–Whitney’s U test was used to compare non-normally distributed data. Results: In this study, the majority (76%, 101/133) of high-grade BHSI were due to motorcycle crashes. Car occupants had a significantly higher injury severity score (ISS; 26.8 ± 10.9 vs. 20.7 ± 10.4, respectively, p = 0.005) and organ injured score (OIS; 3.8 ± 1.0 vs. 3.4 ± 0.6, respectively, p = 0.033), as well as a significantly longer hospital length of stay (LOS; 21.2 days vs. 14.6 days, respectively, p = 0.038) than did motorcyclists. Car occupants with high-grade BHSI also had worse clinical presentations than their motorcyclist counterparts, including a significantly higher incidence of hypotension, hyperpnea, tube thoracostomy, blood transfusion >4 units, LOS in intensive care unit >5 days, and complications. However, there were no differences in the percentage of angiography or laparotomy performed or mortality rate between these two groups of patients. Conclusions: This study demonstrated that car occupants with high-grade BHSI were injured more severely, had a higher incidence of worse clinical presentation, had a longer hospital LOS, and had a higher incidence of complications than motorcyclists. The results also implied that specific attention should be paid to those car occupants with high-grade BHSI, whose critical condition should not be underestimated because of the concept that the patients within in a car are much safer. PMID:27455295

Elementary to High School Students' Growth over an Academic Year in Understanding Concepts of Matter

ERIC Educational Resources Information Center

Liu, Xiufeng

2007-01-01

This paper reports findings on the changes in students' understandings of the concept of matter during an academic year, for students from grade 3 through high school chemistry. The instrument for measuring students' understandings of matter consists of three forms: one for grades 3-6, one for grades 7-9, and one for grades 10-12. The three forms…

Middle Grade Indicators of Readiness in Chicago Public Schools: Looking Forward to High School and College. Research Report

ERIC Educational Resources Information Center

Allensworth, Elaine M.; Gwynne, Julia A.; Moore, Paul; de la Torre, Marisa

2014-01-01

This report is designed to provide a detailed picture of the relationship between students' performance in the middle grades (grades five through eight) and their subsequent performance in high school and college among students in the Chicago Public Schools (CPS). The key findings of this report have been summarized in briefs for middle grade and…

The predictive validity of quality of evidence grades for the stability of effect estimates was low: a meta-epidemiological study.

PubMed

Gartlehner, Gerald; Dobrescu, Andreea; Evans, Tammeka Swinson; Bann, Carla; Robinson, Karen A; Reston, James; Thaler, Kylie; Skelly, Andrea; Glechner, Anna; Peterson, Kimberly; Kien, Christina; Lohr, Kathleen N

2016-02-01

To determine the predictive validity of the U.S. Evidence-based Practice Center (EPC) approach to GRADE (Grading of Recommendations Assessment, Development and Evaluation). Based on Cochrane reports with outcomes graded as high quality of evidence (QOE), we prepared 160 documents which represented different levels of QOE. Professional systematic reviewers dually graded the QOE. For each document, we determined whether estimates were concordant with high QOE estimates of the Cochrane reports. We compared the observed proportion of concordant estimates with the expected proportion from an international survey. To determine the predictive validity, we used the Hosmer-Lemeshow test to assess calibration and the C (concordance) index to assess discrimination. The predictive validity of the EPC approach to GRADE was limited. Estimates graded as high QOE were less likely, estimates graded as low or insufficient QOE more likely to remain stable than expected. The EPC approach to GRADE could not reliably predict the likelihood that individual bodies of evidence remain stable as new evidence becomes available. C-indices ranged between 0.56 (95% CI, 0.47 to 0.66) and 0.58 (95% CI, 0.50 to 0.67) indicating a low discriminatory ability. The limited predictive validity of the EPC approach to GRADE seems to reflect a mismatch between expected and observed changes in treatment effects as bodies of evidence advance from insufficient to high QOE. Copyright © 2016 Elsevier Inc. All rights reserved.

Good Manufacturing Practices production and analysis of a DNA vaccine against dental caries.

PubMed

Yang, Ya-ping; Li, Yu-hong; Zhang, Ai-hua; Bi, Lan; Fan, Ming-wen

2009-11-01

To prepare a clinical-grade anti-caries DNA vaccine pGJA-P/VAX and explore its immune effect and protective efficacy against a cariogenic bacterial challenge. A large-scale industrial production process was developed under Good Manufacturing Practices (GMP) by combining and optimizing common unit operations such as alkaline lysis, precipitation, endotoxin removal and column chromatography. Quality controls of the purified bulk and final lyophilized vaccine were conducted according to authoritative guidelines. Mice and gnotobiotic rats were intranasally immunized with clinical-grade pGJA-P/VAX with chitosan. Antibody levels of serum IgG and salivary SIgA were assessed by an enzyme-linked immunosorbent assay (ELISA), and caries activity was evaluated by the Keyes method. pGJA-P/VAX and pVAX1 prepared by a laboratory-scale commercial kit were used as controls. The production process proved to be scalable and reproducible. Impurities including host protein, residual RNA, genomic DNA and endotoxin in the purified plasmid were all under the limits of set specifications. Intranasal vaccination with clinical-grade pGJA-P/VAX induced higher serum IgG and salivary SIgA in both mice and gnotobiotic rats. While in the experimental caries model, the enamel (E), dentinal slight (Ds), and dentinal moderate (Dm) caries lesions were reduced by 21.1%, 33.0%, and 40.9%, respectively. The production process under GMP was efficient in preparing clinical-grade pGJA-P/VAX with high purity and intended effectiveness, thus facilitating future clinical trials for the anti-caries DNA vaccine.

Correlation between Standardized Uptake Value of 68Ga-DOTA-NOC Positron Emission Tomography/Computed Tomography and Pathological Classification of Neuroendocrine Tumors.

PubMed

Kaewput, Chalermrat; Suppiah, Subapriya; Vinjamuri, Sobhan

2018-01-01

The aim of our study was to correlate tumor uptake of 68 Ga-DOTA-NOC positron emission tomography/computed tomography (PET/CT) with the pathological grade of neuroendocrine tumors (NETs). 68 Ga-DOTA-NOC PET/CT examinations in 41 patients with histopathologically proven NETs were included in the study. Maximum standardized uptake value (SUV max ) and averaged SUV SUV mean of "main tumor lesions" were calculated for quantitative analyses after background subtraction. Uptake on main tumor lesions was compared and correlated with the tumor histological grade based on Ki-67 index and pathological differentiation. Classification was performed into three grades according to Ki-67 levels; low grade: Ki-67 <2, intermediate grade: Ki-67 3-20, and high grade: Ki-67 >20. Pathological differentiation was graded into well- and poorly differentiated groups. The values were compared and evaluated for correlation and agreement between the two parameters was performed. Our study revealed negatively fair agreement between SUV max of tumor and Ki-67 index ( r = -0.241) and negatively poor agreement between SUV mean of tumor and Ki-67 index ( r = -0.094). SUV max of low-grade, intermediate-grade, and high-grade Ki-67 index is 26.18 ± 14.56, 30.71 ± 24.44, and 6.60 ± 4.59, respectively. Meanwhile, SUV mean of low-grade, intermediate-grade, and high-grade Ki-67 is 8.92 ± 7.15, 9.09 ± 5.18, and 3.00 ± 1.38, respectively. As expected, there was statistically significant decreased SUV max and SUV mean in high-grade tumors (poorly differentiated NETs) as compared with low- and intermediate-grade tumors (well-differentiated NETs). SUV of 68 Ga-DOTA-NOC PET/CT is not correlated with histological grade of NETs. However, there was statistically significant decreased tumor uptake of 68 Ga-DOTA-NOC in poorly differentiated NETs as compared with the well-differentiated group. As a result of this pilot study, we confirm that the lower tumor uptake of 68 Ga-DOTA-NOC may be associated with aggressive behavior and may, therefore, result in poor prognosis.

Selenium- or vitamin E-related gene variants, interaction with supplementation, and risk of high-grade prostate cancer in SELECT

PubMed Central

Chan, June M.; Darke, Amy K.; Penney, Kathryn L.; Tangen, Catherine M.; Goodman, Phyllis J.; Lee, Gwo-Shu Mary; Sun, Tong; Peisch, Sam; Tinianow, Alex M.; Rae, James M.; Klein, Eric A.; Thompson, Ian M.

2016-01-01

Background Epidemiological studies and secondary analyses of randomized trials supported the hypothesis that selenium and vitamin E lower prostate cancer risk. However, the Selenium and Vitamin E Cancer Prevention Trial (SELECT) showed no benefit of either supplement. Genetic variants involved in selenium or vitamin E metabolism or transport may underlie the complex associations of selenium and vitamin E. Methods We undertook a case-cohort study of SELECT participants randomized to placebo, selenium or vitamin E. The subcohort included 1,434 men; our primary outcome was high-grade prostate cancer (N=278 cases, Gleason 7 or higher cancer). We used weighted Cox regression to examine the association between SNPs and high-grade prostate cancer risk. To assess effect modification, we created interaction terms between randomization arm and genotype and calculated log likelihood statistics. Results We noted statistically significant (p<0.05) interactions between selenium assignment, SNPs in CAT, SOD2, PRDX6, SOD3, and TXNRD2 and high-grade prostate cancer risk. Statistically significant SNPs that modified the association of vitamin E assignment and high-grade prostate cancer included SEC14L2, SOD1, and TTPA. In the placebo arm, several SNPs, hypothesized to interact with supplement assignment and risk of high-grade prostate cancer, were also directly associated with outcome. Conclusion Variants in selenium and vitamin E metabolism/transport genes may influence risk of overall and high-grade prostate cancer, and may modify an individual man’s response to vitamin E or selenium supplementation with regards to these risks. Impact The effect of selenium or vitamin E supplementation on high-grade prostate cancer risk may vary by genotype. PMID:27197287

Evaluation of open-graded friction course mixture : technical assistance report.

DOT National Transportation Integrated Search

2004-10-01

Open-graded friction course (OGFC) is a porous, gap-graded, predominantly single size aggregate bituminous mixture that contains a high percentage of air voids. The high air void content and the open structure of this mix promote the effective draina...

Complications of nonoperative management of high-grade blunt hepatic injuries.

PubMed

Kozar, Rosemary A; Moore, John B; Niles, Sarah E; Holcomb, John B; Moore, Ernest E; Cothren, C Clay; Hartwell, Elizabeth; Moore, Frederick A

2005-11-01

Nonoperative management of blunt hepatic injuries is highly successful. Complications associated with high-grade injuries, however, have not been well characterized. The purpose of the present study was therefore to define hepatic-related complications and associated treatment modalities in patients undergoing nonoperative management of high-grade blunt hepatic injuries. Three hundred thirty-seven patients from two regional Level I trauma centers with grade 3 to 5 blunt hepatic injuries during a 40-month period were reviewed. Complications and treatment of hepatic-related complications in patients not requiring laparotomy in the first 24 hours were identified. Of 337 patients with a grade 3 to 5 injury, 230 (68%) were managed nonoperatively. There were 37 hepatic-related complications in 25 patients (11%); 63% (5 of 8) of patients with grade 5 injuries developed complications, 21% (19 of 92) of patients with grade 4 injuries, but only 1% (1 of 130) of patients with grade 3 injuries. Complications included bleeding in 13 patients managed by angioembolization (n = 12) and laparotomy (n = 1), liver abscesses in 2 patients managed with computed tomography-guided drainage (n = 2) and subsequent laparotomy (n = 1). In one patient with bleeding, hepatic necrosis followed surgical ligation of the right hepatic artery and required delayed hepatic lobectomy. Sixteen biliary complications were managed with endoscopic retrograde cholangiopancreatography and stenting (n = 7), drainage (n = 5), and laparoscopy (n = 4). Three patients had suspected abdominal sepsis and underwent a negative laparotomy, whereas an additional three patients underwent laparotomy for abdominal compartment syndrome. Nonoperative management of high-grade liver injuries can be safely accomplished. Mortality is low; however, complications in grade 4 and 5 injuries should be anticipated and may require a combination of operative and nonoperative management strategies.

Low-grade and high-grade mammary carcinomas in WAP-T transgenic mice are independent entities distinguished by Met expression.

PubMed

Otto, Benjamin; Gruner, Katharina; Heinlein, Christina; Wegwitz, Florian; Nollau, Peter; Ylstra, Bauke; Pantel, Klaus; Schumacher, Udo; Baumbusch, Lars O; Martin-Subero, José Ignacio; Siebert, Reiner; Wagener, Christoph; Streichert, Thomas; Deppert, Wolfgang; Tolstonog, Genrich V

2013-03-15

Mammary carcinomas developing in SV40 transgenic WAP-T mice arise in two distinct histological phenotypes: as differentiated low-grade and undifferentiated high-grade tumors. We integrated different types of information such as histological grading, analysis of aCGH-based gene copy number and gene expression profiling to provide a comprehensive molecular description of mammary tumors in WAP-T mice. Applying a novel procedure for the correlation of gene copy number with gene expression on a global scale, we observed in tumor samples a global coherence between genotype and transcription. This coherence can be interpreted as a matched transcriptional regulation inherited from the cells of tumor origin and determined by the activity of cancer driver genes. Despite common recurrent genomic aberrations, e.g. gain of chr. 15 in most WAP-T tumors, loss of chr. 19 frequently occurs only in low-grade tumors. These tumors show features of "basal-like" epithelial differentiation, particularly expression of keratin 14. The high-grade tumors are clearly separated from the low-grade tumors by strong expression of the Met gene and by coexpression of epithelial (e.g. keratin 18) and mesenchymal (e.g. vimentin) markers. In high-grade tumors, the expression of the nonmutated Met protein is associated with Met-locus amplification and Met activity. The role of Met as a cancer driver gene is supported by the contribution of active Met signaling to motility and growth of mammary tumor-derived cells. Finally, we discuss the independent origin of low- and high-grade tumors from distinct cells of tumor origin, possibly luminal progenitors, distinguished by Met gene expression and Met signaling. Copyright © 2012 UICC.

Therapeutically blocking Interleukin-11 Receptor-α enhances doxorubicin cytotoxicity in high grade type I endometrioid tumours.

PubMed

Winship, Amy; Van Sinderen, Michelle; Rainczuk, Katarzyna; Dimitriadis, Evdokia

2017-04-04

High grade type I endometrial cancers have poor prognosis. Interleukin (IL)11 is elevated in tumours and uterine lavage with increasing tumour grade in women. IL11 regulates cell cycle, invasion and migration and we recently demonstrated that IL11 receptor (R)α inhibition impaired low and moderate grade endometrial tumourigenesis in vivo. In this report, we hypothesized that micro-RNA(miR)-1 regulates IL11 and that IL11 promotes high grade endometrial tumour growth. We aimed to determine whether combination treatment using an anti-human IL11Rα blocking antibody (Ab) and doxorubicin chemotherapeutic impairs high grade tumour growth. MiR-1 was absent in human endometrial tumours versus human benign endometrium (n = 10/group). Transfection with miR-1 mimic restored miR-1 expression, down-regulated IL11 mRNA and impaired cell viability in grade 3-derived AN3CA human endometrial epithelial cancer cells. AN3CA cell proliferation was reduced in response to Ab and doxorubicin combination treatment versus Ab, IgG control, or doxorubicin alone. Subcutaneous xenograft tumours were established in female Balb/c athymic nude mice using AN3CA cells expressing IL11 and IL11Rα. Administration of recombinant human IL11 to mice (n = 4/group) activated IL11 downstream target, signal transducers and activators of transcription (STAT3) and significantly increased tumour growth (p < 0.05), suggesting that IL11 promotes high grade tumour growth. IL11Rα blocking Ab reduced STAT3 phosphorylation and combination treatment with doxorubicin resulted in a significant reduction in tumour growth (p < 0.05) compared to Ab, doxorubicin, or IgG control. Our data suggest that therapeutically targeting IL11Rα in combination with doxorubicin chemotherapy could inhibit high grade type I endometrioid cancer growth.

ABT-888 and Temozolomide in Treating Young Patients With Recurrent or Refractory CNS Tumors

ClinicalTrials.gov

2014-07-07

Childhood Atypical Teratoid/Rhabdoid Tumor; Childhood Central Nervous System Germ Cell Tumor; Childhood Choroid Plexus Tumor; Childhood Craniopharyngioma; Childhood Ependymoblastoma; Childhood Grade I Meningioma; Childhood Grade II Meningioma; Childhood Grade III Meningioma; Childhood High-grade Cerebellar Astrocytoma; Childhood High-grade Cerebral Astrocytoma; Childhood Infratentorial Ependymoma; Childhood Low-grade Cerebellar Astrocytoma; Childhood Low-grade Cerebral Astrocytoma; Childhood Medulloepithelioma; Childhood Mixed Glioma; Childhood Oligodendroglioma; Childhood Supratentorial Ependymoma; Recurrent Childhood Brain Stem Glioma; Recurrent Childhood Brain Tumor; Recurrent Childhood Cerebellar Astrocytoma; Recurrent Childhood Cerebral Astrocytoma; Recurrent Childhood Ependymoma; Recurrent Childhood Medulloblastoma; Recurrent Childhood Pineoblastoma; Recurrent Childhood Spinal Cord Neoplasm; Recurrent Childhood Subependymal Giant Cell Astrocytoma; Recurrent Childhood Supratentorial Primitive Neuroectodermal Tumor; Recurrent Childhood Visual Pathway and Hypothalamic Glioma

Characterization of solar-grade silicon produced by the SiF4-Na process

NASA Technical Reports Server (NTRS)

Sanjurjo, A.; Sancier, K. M.; Emerson, R. M.; Leach, S. C.; Minahan, J.

1986-01-01

A process was developed for producing low cost solar grade silicon by the reaction between SiF4 gas and sodium metal. The results of the characterization of the silicon are presented. These results include impurity levels, electronic properties of the silicon after crystal growth, and the performance of solar photovoltaic cells fabricated from wafers of the single crystals. The efficiency of the solar cells fabricated from semiconductor silicon and SiF4-Na silicon was the same.

Upgrading of consumer characteristics of granulated solid fuel from mixture of low-grade coal and biomass

NASA Astrophysics Data System (ADS)

Kuzmina, J. S.; Milovanov, O. Yu; Sinelshchikov, V. A.; Sytchev, G. A.; Zaichenko, V. M.

2015-11-01

Effect of torrefaction on consumer characteristics of fuel pellets made of low-grade and agricultural waste is shown. Data on the volatile content, ash content, calorific value and hygroscopicity for initial pellets and pellets, heat-treated at various temperatures are presented. The experimental study of the combustion process of initial and heat-treated pellets showed that torrefaction of pellets leads to a decreasing of the ignition temperature and an increasing of the efficiency of boiler plant.

Method for making graded I-III-VI.sub.2 semiconductors and solar cell obtained thereby

DOEpatents

Devaney, Walter E.

1987-08-04

Improved cell photovoltaic conversion efficiencies are obtained by the simultaneous elemental reactive evaporation process of Mickelsen and Chen for making semiconductors by closer control of the evaporation rates and substrate temperature during formation of the near contact, bulk, and near junction regions of a graded I-III-VI.sub.2, thin film, semiconductor, such as CuInSe.sub.2 /(Zn,Cd)S or another I-III-VI.sub.2 /II-VI heterojunction.

Investigation of the plastic fracture of high strength steels

NASA Technical Reports Server (NTRS)

Cox, T. B.; Low, J. R., Jr.

1972-01-01

An investigation of the plastic fracture process to improve tensile strength in high strength steels is presented. Two generic types of steels are considered: a quenched and tempered grade and a maraging grade, in order to compare two different matrix microstructures. Each type of steel was studied in commercial grade purity and in special melted high purity form, low in residual and impurity elements. The specific alloys dealt with include AISI 4340 and 18 Ni, 200 grade maraging steel, both heat treated to the same yield strength level of approximately 200 ksi.

Grade classification of neuroepithelial tumors using high-resolution magic-angle spinning proton nuclear magnetic resonance spectroscopy and pattern recognition.

PubMed

Chen, WenXue; Lou, HaiYan; Zhang, HongPing; Nie, Xiu; Lan, WenXian; Yang, YongXia; Xiang, Yun; Qi, JianPin; Lei, Hao; Tang, HuiRu; Chen, FenEr; Deng, Feng

2011-07-01

Clinical data have shown that survival rates vary considerably among brain tumor patients, according to the type and grade of the tumor. Metabolite profiles of intact tumor tissues measured with high-resolution magic-angle spinning proton nuclear magnetic resonance spectroscopy (HRMAS (1)H NMRS) can provide important information on tumor biology and metabolism. These metabolic fingerprints can then be used for tumor classification and grading, with great potential value for tumor diagnosis. We studied the metabolic characteristics of 30 neuroepithelial tumor biopsies, including two astrocytomas (grade I), 12 astrocytomas (grade II), eight anaplastic astrocytomas (grade III), three glioblastomas (grade IV) and five medulloblastomas (grade IV) from 30 patients using HRMAS (1)H NMRS. The results were correlated with pathological features using multivariate data analysis, including principal component analysis (PCA). There were significant differences in the levels of N-acetyl-aspartate (NAA), creatine, myo-inositol, glycine and lactate between tumors of different grades (P<0.05). There were also significant differences in the ratios of NAA/creatine, lactate/creatine, myo-inositol/creatine, glycine/creatine, scyllo-inositol/creatine and alanine/creatine (P<0.05). A soft independent modeling of class analogy model produced a predictive accuracy of 87% for high-grade (grade III-IV) brain tumors with a sensitivity of 87% and a specificity of 93%. HRMAS (1)H NMR spectroscopy in conjunction with pattern recognition thus provides a potentially useful tool for the rapid and accurate classification of human brain tumor grades.

An integrative model of risk for high school disordered eating.

PubMed

Davis, Heather A; Smith, Gregory T

2018-06-21

Binge eating and purging behaviors are associated with significant harm and distress among adolescents. The process by which these behaviors develop (often in the high school years) is not fully understood. We tested the Acquired Preparedness (AP) model of risk involving transactions among biological, personality, and psychosocial factors to predict binge eating and purging behavior in a sample of 1,906 children assessed in the spring of 5th grade (the last year of elementary school), the fall of 6th grade (the first year of middle school), spring of 6th grade, and spring of 10th grade (second year of high school). Pubertal onset in spring of 5th grade predicted increases in negative urgency, but not negative affect, in the fall of 6th grade. Negative urgency in the fall of 6th grade predicted increases in expectancies for reinforcement from eating in the spring of 6th grade, which in turn predicted increases in binge eating behavior in the spring of 10th grade. Negative affect in the fall of 6th grade predicted increases in thinness expectancies in the spring of 6th grade, which in turn predicted increases in purging in the spring of 10th grade. Results demonstrate similarities and differences in the development of these two different bulimic behaviors. Intervention efforts targeting the risk factors evident in this model may prove fruitful in the treatment of eating disorders characterized by binge eating and purging. (PsycINFO Database Record (c) 2018 APA, all rights reserved).

Extraction of Copper from Malanjkhand Low-Grade Ore by Bacillus stearothermophilus.

PubMed

Singh, Sradhanjali; Sukla, Lala Behari; Mishra, Baroda Kanta

2011-10-01

Thermophilic bacteria are actively prevalent in hot water springs. Their potential to grow and sustain at higher temperatures makes them exceptional compare to other microorganism. The present study was initiated to isolate, identify and determine the feasibility of extraction of copper using thermophilic heterotrophic bacterial strain. Bacillus stearothermophilus is a thermophilic heterotrophic bacterium isolated from hot water spring, Atri, Orissa, India. This bacterium was adapted to low-grade chalcopyrite ore and its efficiency to solubilize copper from Malanjkhand low-grade ore was determined. The low-grade copper ore contains 0.27% Cu, in which the major copper-bearing mineral is chalcopyrite associated with other minerals present as minor phase. Variation in parameters such as pulp-density and temperatures were studied. After 30 days of incubation, it was found that Bacillus stearothermophilus solubilize copper up to 81.25% at pH 6.8 at 60°C.

Reconsidering price projections for selected grades of Douglas-fir, coast hem-fir, inland hem-fir, and ponderosa pine lumber.

Treesearch

Richard W. Haynes; Roger D. Fight

2004-01-01

Grade-specific price projections were once again developed for Douglas-fir, coast hem-fir, inland hem-fir, and ponderosa pine lumber. These grade-specific price projections can be used to demonstrate the returns to land management of practices that lead to high-quality logs that produce a larger proportion of high grades of lumber. The price ratios among low, medium,...

Four years of meteor spectra patrol

NASA Technical Reports Server (NTRS)

Harvey, G. A.

1974-01-01

The development of the NASA-Langley Research Center meteor spectra patrol is described in general terms. The recording of very faint meteors was made possible by three great strides in optical and photographic technology in the 1960's: (1) the availability of optical-grade fused silica at modest cost, (2) the development of large transmission gratings with high blaze efficiency, and (3) the development of a method for avoiding plate fogging due to background skylight, which consisted of using a photoelectric meteor detector which actuates the spectrograph shutter when a meteor occurs in the field. The classification scheme for meteor spectra developed by Peter M. Millman is described.

Compact instrument for fluorescence image-guided surgery

NASA Astrophysics Data System (ADS)

Wang, Xinghua; Bhaumik, Srabani; Li, Qing; Staudinger, V. Paul; Yazdanfar, Siavash

2010-03-01

Fluorescence image-guided surgery (FIGS) is an emerging technique in oncology, neurology, and cardiology. To adapt intraoperative imaging for various surgical applications, increasingly flexible and compact FIGS instruments are necessary. We present a compact, portable FIGS system and demonstrate its use in cardiovascular mapping in a preclinical model of myocardial ischemia. Our system uses fiber optic delivery of laser diode excitation, custom optics with high collection efficiency, and compact consumer-grade cameras as a low-cost and compact alternative to open surgical FIGS systems. Dramatic size and weight reduction increases flexibility and access, and allows for handheld use or unobtrusive positioning over the surgical field.

Synthesis of Commercial Products from Copper Wire-Drawing Waste

NASA Astrophysics Data System (ADS)

Ayala, J.; Fernández, B.

2014-06-01

Copper powder and copper sulfate pentahydrate were obtained from copper wire-drawing scale. The hydrometallurgical recycling process proposed in this article yields a high-purity copper powder and analytical grade copper sulfate pentahydrate. In the first stage of this process, the copper is dissolved in sulfuric acid media via dismutation of the scale. In the second stage, copper sulfate pentahydrate is precipitated using ethanol. Effects such as pH, reaction times, stirring speed, initial copper concentration, and ethanol/solution volume ratio were studied during the precipitation from solution reaction. The proposed method is technically straightforward and provides efficient recovery of Cu from wire-drawing scale.

Effect of CH3COOH on Hydrometallurgical Purification of Metallurgical-Grade Silicon Using HCl-HF Leaching

NASA Astrophysics Data System (ADS)

Tian, Chunjin; Lu, Haifei; Wei, Kuixian; Ma, Wenhui; Xie, Keqiang; Wu, Jijun; Lei, Yun; Yang, Bin; Morita, Kazuki

2018-04-01

The present study investigated the effects of adding CH3COOH to HCl and HF used to purify metallurgical-grade Si (MG-Si). After 6 h of leaching MG-Si with an acid mixture consisting of 4 mol L-1 HCl, 3 mol L-1 HF, and 3 mol L-1 CH3COOH at 348 K, the total impurity removal efficiency was 88.5%, exceeding the 81.5% removal efficiency obtained without addition of CH3COOH. The microstructural evolution of Si after etching with the two lixiviants indicated better dissolution of metal impurities in MG-Si when using the HCl-HF-CH3COOH mixture. Furthermore, the leaching kinetics of Fe using the HCl-HF and HCl-HF-CH3COOH mixtures were observed to depend on the interfacial chemical reactions.

The Relationship of Mental Pressure with Optimism and Academic Achievement Motivation among Second Grade Male High School Students

ERIC Educational Resources Information Center

Sarouni, Ali Sedigh; Jenaabadi, Hossein; Pourghaz, Abdulwahab

2016-01-01

The present study aimed to examine the relationship of mental pressure with optimism and academic achievement motivation among second grade second period male high school students. This study followed a descriptive-correlational method. The sample included 200 second grade second period male high school students in Sooran. Data collection tools in…

Impacts of deer herbivory and visual grading on the early performance of high-quality oak planting stock in Tennessee, USA

Treesearch

Christopher M. Oswalt; Wayne K. Clatterbuck; Allan E. Houston

2006-01-01

The growth of outplanted high-quality 1-0 northern red oak (Quercus rubra L.) seedlings, growth differences between two categories of visually graded seedlings and herbivory by white-tail deer (Odocoileus virginianus (Boddaert)) were examined after two growing seasons. Seedlings were planted in plots receiving three overstory treatments (high grade,...

Fourth Grade Factory--An Integrated, Collaborative Unit in Manufacturing and Economics--Make It, Take It.

ERIC Educational Resources Information Center

Bliss, Clifford; Giles, Bob

This unit for fourth grade and high school includes elements of careers, economics and free enterprise for fourth graders and elements of problem solving and design, manufacturing, drafting, and woodworking for high school students. The unit is taught in both the fourth grade and the high school classrooms. The unit involves planning, designing,…

A DEVELOPMENTAL STUDY OF THE RELATIONSHIP BETWEEN REACTION-TIME AND PROBLEM-SOLVING EFFICIENCY. FINAL REPORT.

ERIC Educational Resources Information Center

FRIEDMAN, STANLEY R.

MANY STUDIES HAVE INDICATED THE PRESENCE OF A SLUMP OR INVERSION IN THE PROBLEM-SOLVING EFFICIENCY OF CHILDREN AT THE FOURTH GRADE LEVEL. IT HAS BEEN SUGGESTED THAT THIS MAY BE DUE TO THE INTERFERING EFFECT OF THE FORMATION OF COMPLEX HYPOTHESES BY THE CHILDREN. SINCE A TENDENCY TO RESPOND RAPIDLY WOULD PRESUMABLY INHIBIT THE FORMATION OF COMPLEX…

Bcl-2 protein expression in mucoepidermoid carcinoma of salivary glands: a single institution experience.

PubMed

Janjua, Omer Sefvan; Qureshi, Sana Mehmood; Khan, Tariq Sarfraz; Alamgir, Wajiha

2012-01-01

Mucoepidermoid carcinoma is the most common salivary gland tumor with varying behavior among different histopathological grades. The objective of this study was to determine the expression of Bcl-2 protein in mucoepidermoid carcinoma (MEC) and to correlate with histological grades. The records of 40 cases of MEC were collected from the histopathology department. Fresh slides were prepared and fresh diagnoses were made using the grading criteria for MEC. Immunohistochemical markers for Bcl-2 were applied and the results analyzed using the chi-square test. Of 40 cases, 20 were males and 20 were females. The range in age of the patients was 6 to 67 years mean (SD) was 42.6 (1.85) years. Twenty-two were low grade (55%), 11 high grade (27.5%) and 7 (17.5%) were intermediate grade MEC. Among these 40 cases, Bcl-2 expression was positive in 24 cases and negative in 16 cases. In 22 cases of low-grade MEC, 19 were positive while only 3 were negative. In high-grade tumors, all 11 cases were found to have a negative expression of Bcl-2 protein. In intermediate-grade MEC, 5 cases showed positive expression while only 2 cases showed negative expression. Bcl-2 protein expression showed positive expression in low-grade and negative expression in high-grade MEC. Intermediate grade showed more than 50% positive results for Bcl-2. Correlation between grades of MEC and expression of Bcl-2 is statistically significant and can be used for the depicting the prognosis of MEC along with other prognostic and clinico-pathological parameters.

Breadth of Extracurricular Participation and Adolescent Adjustment Among African-American and European-American Youth

PubMed Central

Fredricks, Jennifer A.; Eccles, Jacquelynne S.

2012-01-01

We examined the linear and nonlinear relations between breadth of extracurricular participation in 11th grade and developmental outcomes at 11th grade and 1 year after high school in an economically diverse sample of African-American and European-American youth. In general, controlling for demographic factors, children's motivation, and the dependent variable measured 3 years earlier, breadth was positively associated with indicators of academic adjustment at 11th grade and at 1 year after high school. In addition, for the three academic outcomes (i.e., grades, educational expectations, and educational status) the nonlinear function was significant; at high levels of involvement the well-being of youth leveled off or declined slightly. In addition, breadth of participation at 11th grade predicted lower internalizing behavior, externalizing behavior, alcohol use, and marijuana use at 11th grade. Finally, the total number of extracurricular activities at 11th grade was associated with civic engagement 2 years later. PMID:22837637

Breadth of Extracurricular Participation and Adolescent Adjustment Among African-American and European-American Youth.

PubMed

Fredricks, Jennifer A; Eccles, Jacquelynne S

2010-06-01

We examined the linear and nonlinear relations between breadth of extracurricular participation in 11th grade and developmental outcomes at 11th grade and 1 year after high school in an economically diverse sample of African-American and European-American youth. In general, controlling for demographic factors, children's motivation, and the dependent variable measured 3 years earlier, breadth was positively associated with indicators of academic adjustment at 11th grade and at 1 year after high school. In addition, for the three academic outcomes (i.e., grades, educational expectations, and educational status) the nonlinear function was significant; at high levels of involvement the well-being of youth leveled off or declined slightly. In addition, breadth of participation at 11th grade predicted lower internalizing behavior, externalizing behavior, alcohol use, and marijuana use at 11th grade. Finally, the total number of extracurricular activities at 11th grade was associated with civic engagement 2 years later.

The evaluation of lumbosacral dysplasia in young patients with lumbosacral spondylolisthesis: comparison with controls and relationship with the severity of slip.

PubMed

Pawar, Abhijit; Labelle, Hubert; Mac-Thiong, Jean-Marc

2012-11-01

Comparison of lumbosacral dysplasia between normal individuals and patients with low and high grade spondylolisthesis has not been done previously. The objective of this study is to evaluate the relationship between lumbosacral dysplasia and severity of slip in young patients with lumbosacral spondylolisthesis. Postero-anterior and lateral radiographs of 120 normal individuals and 131 patients with developmental spondylolisthesis (91 low and 40 high grades) were reviewed. Quantitative evaluation of lumbosacral dysplasia was done using 6 criteria involving the degree of laminar dysplasia, degree of facet dysplasia, size of L5 transverse processes, L5/S1 disc height, type of sacral doming and L5 lumbar index. Subjects were categorized as having no/low, moderate or severe dysplasia based on the total dysplasia score. Comparisons in total dysplasia score between normal, low grade and high grade groups were performed and the correlation between degree of dysplasia and percentage of slip was assessed. Most normal individuals (88.3%) had no/low dysplasia; most patients with low grade spondylolisthesis (61.5%) had moderate dysplasia, while most patients with high grade spondylolisthesis (72.5%) had severe dysplasia. There was a significant difference in dysplasia between normal individuals and patients with spondylolisthesis. Dysplasia also varied significantly between low and high grade spondylolisthesis. There was a strong positive correlation (r = 0.63) between severity of dysplasia and percentage of slip. There is a significant relationship between the severity of spondylolisthesis and lumbosacral dysplasia, with mainly no/low dysplasia observed in controls and increasing total dysplasia scores in higher grades of spondylolisthesis. In addition, a variable degree of dysplasia was found within groups with low or high grade spondylolisthesis, suggesting that different subgroups of patients exist with regard to dysplasia. Thus the degree of dysplasia varies in spondylolisthesis and it is possible that different grades of dysplasia could relate to different prognoses or outcomes with treatment.

[Influence of road on breeding habitat of Nipponia nippon based on MaxEnt model].

PubMed

Zhang, Hui; Gao, Ji Xi; Ma, Meng Xiao; Shao, Fang Ze; Wang, Qiao; Li, Guang Yu; Qiu, Jie; Zhou, Ke Xin

2017-04-18

Quantitative study on effects of roads on suitable breeding habitats of wildlife is one of topics that need in-depth research in road ecology. Crested ibis (Nipponia nippon), a first class nationally protected bird species, is the species of interest in this research. Using the Maximum Entropy Models (MaxEnt) in the Species Distribution Model (SDM) toolbox of ArcGIS, autocorrelation of environmental variables were analyzed and environmental variables with r>0.8 were removed. Ten environmental variables were chosen as impact factors for the breeding habitat of crested ibis, including mean temperature of coldest quarter, landscape type, normalized difference vegetation index(NDVI), slope, aspect, distance to waters, distance to paddy field, distance to high-grade roads (expressway, national way, provincial way), and distance to low-grade roads (country road). By analyzing the contribution rate of each environmental variable, the results showed that the mean temperature of coldest quarter, landscape type, distance to paddy field, and distance to high-grade roads were the main factors determining breeding habitat of crested ibis. The suitable distribution of crested ibis' nesting area was under the following scenarios: variable road present (scenario1), high-grade road absent (scenario2), and low-grade road absent (scenario 3). The results showed that the presence of roads affected suitable nesting areas of crested ibis with high-grade roads showing a larger influence than low-grade roads. The presence of high-grade roads and low-grade roads decreased the suitable nesting areas of crested ibis by 66.23 and 35.69 km 2 , respectively. The crested ibis preferred to nest in areas distant from high-grade roads, with an average road avoidance distance of 1500 m. This study was of great significance for formulating management measures to protect crested ibis and provide a reference for quantitative assessment on impacts of engineering and construction projects on wildlife.

Practical target location and accuracy indicator in digital close range photogrammetry using consumer grade cameras

NASA Astrophysics Data System (ADS)

Moriya, Gentaro; Chikatsu, Hirofumi

2011-07-01

Recently, pixel numbers and functions of consumer grade digital camera are amazingly increasing by modern semiconductor and digital technology, and there are many low-priced consumer grade digital cameras which have more than 10 mega pixels on the market in Japan. In these circumstances, digital photogrammetry using consumer grade cameras is enormously expected in various application fields. There is a large body of literature on calibration of consumer grade digital cameras and circular target location. Target location with subpixel accuracy had been investigated as a star tracker issue, and many target location algorithms have been carried out. It is widely accepted that the least squares models with ellipse fitting is the most accurate algorithm. However, there are still problems for efficient digital close range photogrammetry. These problems are reconfirmation of the target location algorithms with subpixel accuracy for consumer grade digital cameras, relationship between number of edge points along target boundary and accuracy, and an indicator for estimating the accuracy of normal digital close range photogrammetry using consumer grade cameras. With this motive, an empirical testing of several algorithms for target location with subpixel accuracy and an indicator for estimating the accuracy are investigated in this paper using real data which were acquired indoors using 7 consumer grade digital cameras which have 7.2 mega pixels to 14.7 mega pixels.

Distinction of brain tissue, low grade and high grade glioma with time-resolved fluorescence spectroscopy

PubMed Central

Yong, William H.; Butte, Pramod V.; Pikul, Brian K.; Jo, Javier A.; Fang, Qiyin; Papaioannou, Thanassis; Black, Keith L.; Marcu, Laura

2010-01-01

Neuropathology frozen section diagnoses are difficult in part because of the small tissue samples and the paucity of adjunctive rapid intraoperative stains. This study aims to explore the use of time-resolved laser-induced fluorescence spectroscopy as a rapid adjunctive tool for the diagnosis of glioma specimens and for distinction of glioma from normal tissues intraoperatively. Ten low grade gliomas, 15 high grade gliomas without necrosis, 6 high grade gliomas with necrosis and/or radiation effect, and 14 histologically uninvolved “normal” brain specimens are spectroscopicaly analyzed and contrasted. Tissue autofluorescence was induced with a pulsed Nitrogen laser (337 nm, 1.2 ns) and the transient intensity decay profiles were recorded in the 370-500 nm spectral range with a fast digitized (0.2 ns time resolution). Spectral intensities and time-dependent parameters derived from the time-resolved spectra of each site were used for tissue characterization. A linear discriminant analysis diagnostic algorithm was used for tissue classification. Both low and high grade gliomas can be distinguished from histologically uninvolved cerebral cortex and white matter with high accuracy (above 90%). In addition, the presence or absence of treatment effect and/or necrosis can be identified in high grade gliomas. Taking advantage of tissue autofluorescence, this technique facilitates a direct and rapid investigation of surgically obtained tissue. PMID:16368511

Spinal tuberculosis, natural history of disease, classifications and principles of management with historical perspective.

PubMed

Kumar, Kush

2016-08-01

To describe the natural history spinal tuberculosis, classifications and principles of management based upon the grading of the neurological deficit. Review of literature was conducted with the aim to provide the clinico-radiological correlation of the natural history of spinal tuberculosis in different stages. Management strategy is developed based upon the severity of the neurological deficit. A five stage natural history of spinal tuberculosis is described. Stage of neurological involvement is further divided into 4 grades, predominantly on the basis of progressively increasing motor deficits as negligible, mild, moderate and severe with sensory and autonomic dysfunctions. Suitable principles of management with role of rest, braces, chemotherapy and surgery are discussed. Neurological deficit grading based management is developed. Grade 1 and 2, conservative treatment, grade 3, gray zone and grade 4, operative treatment is emphasized. The five stages of natural history of tuberculosis of spine have been developed from the clinician's point of view. Management of tuberculosis of spine, in general, it is no different than management of soft tissue tuberculosis, in HIV negative or positive patients. Role of surgery is very limited. Management of tubercular paraplegia, based upon the grading of paraplegia is simple, logical, efficient and easy to understand and remember by any orthopedic surgeon.

A Cross-Layer Duty Cycle MAC Protocol Supporting a Pipeline Feature for Wireless Sensor Networks

PubMed Central

Tong, Fei; Xie, Rong; Shu, Lei; Kim, Young-Chon

2011-01-01

Although the conventional duty cycle MAC protocols for Wireless Sensor Networks (WSNs) such as RMAC perform well in terms of saving energy and reducing end-to-end delivery latency, they were designed independently and require an extra routing protocol in the network layer to provide path information for the MAC layer. In this paper, we propose a new cross-layer duty cycle MAC protocol with data forwarding supporting a pipeline feature (P-MAC) for WSNs. P-MAC first divides the whole network into many grades around the sink. Each node identifies its grade according to its logical hop distance to the sink and simultaneously establishes a sleep/wakeup schedule using the grade information. Those nodes in the same grade keep the same schedule, which is staggered with the schedule of the nodes in the adjacent grade. Then a variation of the RTS/CTS handshake mechanism is used to forward data continuously in a pipeline fashion from the higher grade to the lower grade nodes and finally to the sink. No extra routing overhead is needed, thus increasing the network scalability while maintaining the superiority of duty-cycling. The simulation results in OPNET show that P-MAC has better performance than S-MAC and RMAC in terms of packet delivery latency and energy efficiency. PMID:22163895

SJDAWN: St. Jude Children's Research Hospital Phase 1 Study Evaluating Molecularly-Driven Doublet Therapies for Children and Young Adults With Recurrent Brain Tumors

ClinicalTrials.gov

2018-04-09

Anaplastic Astrocytoma; Anaplastic Ependymoma; Anaplastic Ganglioglioma; Anaplastic Meningioma; Anaplastic Oligodendroglioma; Pleomorphic Xanthoastrocytoma, Anaplastic; Atypical Teratoid/Rhabdoid Tumor; Brain Cancer; Brain Tumor; Central Nervous System Neoplasms; Choroid Plexus Carcinoma; CNS Embryonal Tumor With Rhabdoid Features; Ganglioneuroblastoma of Central Nervous System; CNS Tumor; Embryonal Tumor of CNS; Ependymoma; Glioblastoma; Glioma; Glioma, Malignant; Medulloblastoma; Medulloblastoma; Unspecified Site; Medulloepithelioma; Neuroepithelial Tumor; Neoplasms; Neoplasms, Neuroepithelial; Papillary Tumor of the Pineal Region (High-grade Only); Pediatric Brain Tumor; Pineal Parenchymal Tumor of Intermediate Differentiation (High-grade Only); Pineoblastoma; Primitive Neuroectodermal Tumor; Recurrent Medulloblastoma; Refractory Brain Tumor; Neuroblastoma. CNS; Glioblastoma, IDH-mutant; Glioblastoma, IDH-wildtype; Medulloblastoma, Group 3; Medulloblastoma, Group 4; Glioma, High Grade; Neuroepithelial Tumor, High Grade; Medulloblastoma, SHH-activated and TP53 Mutant; Medulloblastoma, SHH-activated and TP53 Wildtype; Medulloblastoma, Chromosome 9q Loss; Medulloblastoma, Non-WNT Non-SHH, NOS; Medulloblastoma, Non-WNT/Non-SHH; Medulloblastoma, PTCH1 Mutation; Medulloblastoma, WNT-activated; Ependymoma, Recurrent; Glioma, Recurrent High Grade; Glioma, Recurrent Malignant; Embryonal Tumor, NOS; Glioma, Diffuse Midline, H3K27M-mutant; Embryonal Tumor With Multilayered Rosettes (ETMR); Ependymoma, NOS, WHO Grade III; Ependymoma, NOS, WHO Grade II; Medulloblastoma, G3/G4; Ependymoma, RELA Fusion Positive

Electronic Power System Application of Diamond-Like Carbon Films

NASA Technical Reports Server (NTRS)

Wu, Richard L. C.; Kosai, H.; Fries-Carr, S.; Weimer, J.; Freeman, M.; Schwarze, G. E.

2003-01-01

A prototype manufacturing technology for producing high volume efficiency and high energy density diamond-like carbon (DLC) capacitors has been developed. Unique dual ion-beam deposition and web-handling systems have been designed and constructed to deposit high quality DLC films simultaneously on both sides of capacitor grade aluminum foil and aluminum-coated polymer films. An optimized process, using inductively coupled RF ion sources, has been used to synthesize electrically robust DLC films. DLC films are amorphous and highly flexible, making them suitable for the production of wound capacitors. DLC capacitors are reliable and stable over a wide range of AC frequencies from 20 Hz to 1 MHz, and over a temperature range from .500 C to 3000 C. The compact DLC capacitors offer at least a 50% decrease in weight and volume and a greater than 50% increase in temperature handling capability over equal value capacitors built with existing technologies. The DLC capacitors will be suitable for high temperature, high voltage, pulsed power and filter applications.

Extensor tendinopathy of the elbow assessed with sonoelastography: histologic correlation.

PubMed

Klauser, Andrea S; Pamminger, Mathias; Halpern, Ethan J; Abd Ellah, Mohamed M H; Moriggl, Bernhard; Taljanovic, Mihra S; Deml, Christian; Sztankay, Judit; Klima, Guenther; Jaschke, Werner R

2017-08-01

To compare agreement between conventional B-mode ultrasound (US) and compression sonoelastography (SEL) of the common extensor tendons of the elbow with histological evaluation. Twenty-six common extensor tendons were evaluated in 17 cadavers (11 females, median age 85 years and 6 males, median age 80 years). B-mode US was graded into: Grade 1, homogeneous fibrillar pattern; grade 2, hypoechoic areas and/or calcifications <30%; and grade 3 > 30%. SEL was graded into: Grade 1 indicated blue (hardest) to green (hard); grade 2 yellow (soft); and grade 3 red (softest). B-mode US, SEL, and a combined grading score incorporating both were compared to histological findings in 76 biopsies. Histological alterations were detected in 55/76 biopsies. Both modalities showed similar results (sensitivity, specificity, and accuracy 84%, 81%, and 83% for B-mode US versus 85%, 86%, and 86% for SEL, respectively, P > 0.3). However, a combination of both resulted in significant improvement in sensitivity (96%, P < 0.02) without significant change in specificity (81%, P < 0.3), yielding an improved overall accuracy (92%). Combined imaging of the extensor tendons with both modalities is superior to either modality alone for predicting the presence of pathologic findings on histology. • Combination of B-mode US and SEL proved efficiency in diagnosing lateral epicondylitis. • Combination of B-mode US and SEL in lateral epicondylitis correlates to histology. • Combination of both modalities provides improved sensitivity without loss of specificity.

Heterotopic ossification and clinical outcome in nonconstrained cervical arthroplasty 2 years after surgery: the Norwegian Cervical Arthroplasty Trial (NORCAT).

PubMed

Sundseth, Jarle; Jacobsen, Eva Astrid; Kolstad, Frode; Sletteberg, Ruth O; Nygaard, Oystein P; Johnsen, Lars Gunnar; Pripp, Are Hugo; Andresen, Hege; Fredriksli, Oddrun Anita; Myrseth, Erling; Zwart, John A

2016-07-01

Heterotopic ossification is a phenomenon in cervical arthroplasty. Previous reports have mainly focused on various semiconstrained devices and only a few publications have focused on ossification around devices that are nonconstrained. The purpose of this study was to assess the occurrence of heterotopic ossification around a nonconstrained cervical device and how it affects clinical outcome 2 years after surgery. Thirty-seven patients were included from a larger cohort of a randomized controlled trial (NORCAT) which compared single-level cervical arthroplasty with fusion. The occurrence of heterotopic ossification was assessed with a CT scan and two neuroradiologists determined its degree. For grading, we used the Mehren/Suchomel classification system (grade 0-4). The patients were divided by level of ossification, low grade (0-2) or high grade (3-4), and clinical outcomes were compared. Self-rated disability for neck and arm pain (Neck Disability Index), health-related quality of life (the Short Form-36 and EuroQol-5D), and pain (the Numeric Rating Scale 11) were used as clinical outcome measures. Heterotopic ossification was encountered in all patients 2 years after surgery. Complete fusion (grade 4) was found in 16 % of participants, and high-grade ossification (grade 3-4) occurred in 62 %. The remaining patients were classified as having low-grade ossification (grade 2). There were no differences in the clinical outcomes of patients with low- and high-grade ossification. High-grade heterotopic ossification and spontaneous fusion 2 years after surgery were seen in a significant number of patients. However, the degree of ossification did not influence the clinical outcome.

Validity of High-School Grades in Predicting Student Success beyond the Freshman Year: High-School Record vs. Standardized Tests as Indicators of Four-Year College Outcomes. Research & Occasional Paper Series: CSHE.6.07

ERIC Educational Resources Information Center

Geiser, Saul; Santelices, Maria Veronica

2007-01-01

High-school grades are often viewed as an unreliable criterion for college admissions, owing to differences in grading standards across high schools, while standardized tests are seen as methodologically rigorous, providing a more uniform and valid yardstick for assessing student ability and achievement. The present study challenges that…

Evaluation of the Role of Vibrational Spectroscopy in the Assessment of Vulval Disease

ClinicalTrials.gov

2017-08-03

Normal Vulval Skin; Lichen Sclerosus; High Grade Dysplasia - Usual Type ('VIN 2-3'); High Grade Dysplasia - Differentiated Type ('VIN 2-3'); Squamous Cell Carcinoma; Epithelial Hyperplasia Without Atypia; Atypia Not Otherwise Specified/ Low Grade Dysplasia ('VIN 1'); Pagets Disease of the Vulva

Efficient Learning for the Poor: New Insights into Literacy Acquisition for Children

NASA Astrophysics Data System (ADS)

Abadzi, Helen

2008-11-01

Reading depends on the speed of visual recognition and capacity of short-term memory. To understand a sentence, the mind must read it fast enough to capture it within the limits of the short-term memory. This means that children must attain a minimum speed of fairly accurate reading to understand a passage. Learning to read involves "tricking" the brain into perceiving groups of letters as coherent words. This is achieved most efficiently by pairing small units consistently with sounds rather than learning entire words. To link the letters with sounds, explicit and extensive practice is needed; the more complex the spelling of a language, the more practice is necessary. However, schools of low-income students often waste instructional time and lack reading resources, so students cannot get sufficient practice to automatize reading and may remain illiterate for years. Lack of reading fluency in the early grades creates inefficiencies that affect the entire educational system. Neurocognitive research on reading points to benchmarks and monitoring indicators. All students should attain reading speeds of 45-60 words per minute by the end of grade 2 and 120-150 words per minute for grades 6-8.

Developmental dissociation in the neural responses to simple multiplication and subtraction problems

PubMed Central

Prado, Jérôme; Mutreja, Rachna; Booth, James R.

2014-01-01

Mastering single-digit arithmetic during school years is commonly thought to depend upon an increasing reliance on verbally memorized facts. An alternative model, however, posits that fluency in single-digit arithmetic might also be achieved via the increasing use of efficient calculation procedures. To test between these hypotheses, we used a cross-sectional design to measure the neural activity associated with single-digit subtraction and multiplication in 34 children from 2nd to 7th grade. The neural correlates of language and numerical processing were also identified in each child via localizer scans. Although multiplication and subtraction were undistinguishable in terms of behavior, we found a striking developmental dissociation in their neural correlates. First, we observed grade-related increases of activity for multiplication, but not for subtraction, in a language-related region of the left temporal cortex. Second, we found grade-related increases of activity for subtraction, but not for multiplication, in a region of the right parietal cortex involved in the procedural manipulation of numerical quantities. The present results suggest that fluency in simple arithmetic in children may be achieved by both increasing reliance on verbal retrieval and by greater use of efficient quantity-based procedures, depending on the operation. PMID:25089323

Grading as a Sadomasochistic Activity or an Erotic Benevolent Activity?

ERIC Educational Resources Information Center

Tjarks, Larry D.

Numerous research studies have been conducted concerning the negative aspects of grading: the low correlations between academic success (high grades) and later vocational or professional success, possible sadomasochistic motives of teachers in awarding grades, and grade assignment resulting from the teacher's sense of duty or responsibility to…

Sonographic features of invasive ductal breast carcinomas predictive of malignancy grade.

PubMed

Gupta, Kanika; Kumaresan, Meenakshisundaram; Venkatesan, Bhuvaneswari; Chandra, Tushar; Patil, Aruna; Menon, Maya

2018-01-01

Assessment of individual sonographic features provides vital clues about the biological behavior of breast masses and can assist in determining histological grade of malignancy and thereby prognosis. Assessment of individual sonographic features of biopsy proven invasive ductal breast carcinomas as predictors of malignancy grade. A retrospective analysis of sonographic findings of 103 biopsy proven invasive ductal breast carcinomas. Tumor characteristics on gray-scale ultrasound and color flow were assessed using American College of Radiology (ACR) Breast Imaging Reporting and Data System (BI-RADS) Atlas Fifth Edition. The sonographic findings of masses were individually correlated with their histopathologic grades. Chi square test, ordinal regression, and Goodman and Kruskal tau test. Breast mass showing reversal/lack of diastolic flow has a high probability of belonging to histological high grade tumor ( β 1.566, P 0.0001 ). The masses with abrupt interface boundary are more likely grade 3 ( β 1.524, P 0.001 ) in comparison to masses with echogenic halos. The suspicious calcifications present in and outside the mass is a finding associated with histologically high grade tumors. The invasive ductal carcinomas (IDCs) with complex solid and cystic echotexture are more likely to be of high histological grade ( β 1.146, P 0.04 ) as compared to masses with hypoechoic echotexture. Certain ultrasound features are associated with tumor grade on histopathology. If the radiologist is cognizant of these sonographic features, ultrasound can be a potent modality for predicting histopathological grade of IDCs of the breast, especially in settings where advanced tests such as receptor and molecular analyses are limited.

Comparison of Different Post-Processing Algorithms for Dynamic Susceptibility Contrast Perfusion Imaging of Cerebral Gliomas.

PubMed

Kudo, Kohsuke; Uwano, Ikuko; Hirai, Toshinori; Murakami, Ryuji; Nakamura, Hideo; Fujima, Noriyuki; Yamashita, Fumio; Goodwin, Jonathan; Higuchi, Satomi; Sasaki, Makoto

2017-04-10

The purpose of the present study was to compare different software algorithms for processing DSC perfusion images of cerebral tumors with respect to i) the relative CBV (rCBV) calculated, ii) the cutoff value for discriminating low- and high-grade gliomas, and iii) the diagnostic performance for differentiating these tumors. Following approval of institutional review board, informed consent was obtained from all patients. Thirty-five patients with primary glioma (grade II, 9; grade III, 8; and grade IV, 18 patients) were included. DSC perfusion imaging was performed with 3-Tesla MRI scanner. CBV maps were generated by using 11 different algorithms of four commercially available software and one academic program. rCBV of each tumor compared to normal white matter was calculated by ROI measurements. Differences in rCBV value were compared between algorithms for each tumor grade. Receiver operator characteristics analysis was conducted for the evaluation of diagnostic performance of different algorithms for differentiating between different grades. Several algorithms showed significant differences in rCBV, especially for grade IV tumors. When differentiating between low- (II) and high-grade (III/IV) tumors, the area under the ROC curve (Az) was similar (range 0.85-0.87), and there were no significant differences in Az between any pair of algorithms. In contrast, the optimal cutoff values varied between algorithms (range 4.18-6.53). rCBV values of tumor and cutoff values for discriminating low- and high-grade gliomas differed between software packages, suggesting that optimal software-specific cutoff values should be used for diagnosis of high-grade gliomas.

Organically modified low-grade kaolin as a secondary containment material for underground storage tanks.

PubMed

Moon, Chul-Hwan; Lee, Jai-Young; Oh, Byung-Taek; Choi, Sang-Il

2007-08-01

Batch scale reactions were conducted to evaluate the efficacy of modified low-grade kaolin for the treatment of petroleum contaminants. Low-grade kaolin, which has been unvalued as material in the mining process because of its low quality for commercial products, was modified with HDTMA (hexadecyl-trimethylammonium), and its efficiency was compared with that of HDTMA-modified bentonite, which is used as a secondary containment barrier for underground storage tanks. The sorption capacity and hydraulic conductivity of both the HDTMA-modified bentonite and low-grade kaolin were investigated and showed distribution coefficients in the sorption of benzene, toluene, ethylbenzene and xylene ranging between 45.7 and 583.7 and 57.0 and 525.1, respectively. The hydraulic conductivities were 2.53 x 10(-8) and 5.62 x 10(-8) cm/s for the HDTMA-modified bentonite and low-grade kaolin, respectively. These results suggest that HDTMA-modified low-grade kaolin could be used as a hydraulic barrier against advection migration of petroleum contaminants. Simulation of the one-dimensional transport of benzene through a liner made of either one of the compounds was also performed. These results also showed that HDTMA-modified kaolin more effectively retards the transport of benzene.

Comprehensive automatic assessment of retinal vascular abnormalities for computer-assisted retinopathy grading.

PubMed

Joshi, Vinayak; Agurto, Carla; VanNess, Richard; Nemeth, Sheila; Soliz, Peter; Barriga, Simon

2014-01-01

One of the most important signs of systemic disease that presents on the retina is vascular abnormalities such as in hypertensive retinopathy. Manual analysis of fundus images by human readers is qualitative and lacks in accuracy, consistency and repeatability. Present semi-automatic methods for vascular evaluation are reported to increase accuracy and reduce reader variability, but require extensive reader interaction; thus limiting the software-aided efficiency. Automation thus holds a twofold promise. First, decrease variability while increasing accuracy, and second, increasing the efficiency. In this paper we propose fully automated software as a second reader system for comprehensive assessment of retinal vasculature; which aids the readers in the quantitative characterization of vessel abnormalities in fundus images. This system provides the reader with objective measures of vascular morphology such as tortuosity, branching angles, as well as highlights of areas with abnormalities such as artery-venous nicking, copper and silver wiring, and retinal emboli; in order for the reader to make a final screening decision. To test the efficacy of our system, we evaluated the change in performance of a newly certified retinal reader when grading a set of 40 color fundus images with and without the assistance of the software. The results demonstrated an improvement in reader's performance with the software assistance, in terms of accuracy of detection of vessel abnormalities, determination of retinopathy, and reading time. This system enables the reader in making computer-assisted vasculature assessment with high accuracy and consistency, at a reduced reading time.

Amide Proton Transfer Imaging Allows Detection of Glioma Grades and Tumor Proliferation: Comparison with Ki-67 Expression and Proton MR Spectroscopy Imaging.

PubMed

Su, C; Liu, C; Zhao, L; Jiang, J; Zhang, J; Li, S; Zhu, W; Wang, J

2017-09-01

Prognosis in glioma depends strongly on tumor grade and proliferation. In this prospective study of patients with untreated primary cerebral gliomas, we investigated whether amide proton transfer-weighted imaging could reveal tumor proliferation and reliably distinguish low-grade from high-grade gliomas compared with Ki-67 expression and proton MR spectroscopy imaging. This study included 42 patients with low-grade ( n = 28) or high-grade ( n = 14) glioma, all of whom underwent conventional MR imaging, proton MR spectroscopy imaging, and amide proton transfer-weighted imaging on the same 3T scanner within 2 weeks before surgery. We assessed metabolites of choline and N -acetylaspartate from proton MR spectroscopy imaging and the asymmetric magnetization transfer ratio at 3.5 ppm from amide proton transfer-weighted imaging and compared them with histopathologic grade and immunohistochemical expression of the proliferation marker Ki-67 in the resected specimens. The asymmetric magnetization transfer ratio at 3.5 ppm values measured by different readers showed good concordance and were significantly higher in high-grade gliomas than in low-grade gliomas (3.61% ± 0.155 versus 2.64% ± 0.185, P = .0016), with sensitivity and specificity values of 92.9% and 71.4%, respectively, at a cutoff value of 2.93%. The asymmetric magnetization transfer ratio at 3.5 ppm values correlated with tumor grade ( r = 0.506, P = .0006) and Ki-67 labeling index ( r = 0.502, P = .002). For all patients, the asymmetric magnetization transfer ratio at 3.5 ppm correlated positively with choline ( r = 0.43, P = .009) and choline/ N -acetylaspartate ratio ( r = 0.42, P = .01) and negatively with N -acetylaspartate ( r = -0.455, P = .005). These correlations held for patients with low-grade gliomas versus those with high-grade gliomas, but the correlation coefficients were higher in high-grade gliomas (choline: r = 0.547, P = .053; N -acetylaspartate: r = -0.644, P = .017; choline/ N -acetylaspartate: r = 0.583, P = .036). The asymmetric magnetization transfer ratio at 3.5 ppm may serve as a potential biomarker not only for assessing proliferation, but also for predicting histopathologic grades in gliomas. © 2017 by American Journal of Neuroradiology.

Prospects for Off-axis Current Drive via High Field Side Lower Hybrid Current Drive in DIII-D

NASA Astrophysics Data System (ADS)

Wukitch, S. J.; Shiraiwa, S.; Wallace, G. M.; Bonoli, P. T.; Holcomb, C.; Park, J. M.; Pinsker, R. I.

2017-10-01

An outstanding challenge for an economical, steady state tokamak is efficient off-axis current drive scalable to reactors. Previous studies have focused on high field side (HFS) launch of lower hybrid waves for current drive (LHCD) in double null configurations in reactor grade plasmas. The goal of this work is to find a HFS LHCD scenario for DIII-D that balances coupling, power penetration and damping. The higher magnetic field on the HFS improves wave accessibility, which allows for lower n||waves to be launched. These waves penetrate farther into the plasma core before damping at higher Te yielding a higher current drive efficiency. Utilizing advanced ray tracing and Fokker Planck simulation tools (GENRAY+CQL3D), wave penetration, absorption and drive current profiles in high performance DIII-D H-Mode plasmas were investigated. We found LH scenarios with single pass absorption, excellent wave penetration to r/a 0.6-0.8, FWHM r/a=0.2 and driven current up to 0.37 MA/MW coupled. These simulations indicate that HFS LHCD has potential to achieve efficient off-axis current drive in DIII-D and the latest results will be presented. Work supported by U.S. Dept. of Energy, Office of Science, Office of Fusion Energy Sciences, using User Facility DIII-D, under Award No. DE-FC02-04ER54698 and Contract No. DE-FC02-01ER54648 under Scientific Discovery through Advanced Computing Initiative.

[High frequency electrocoagulation for treating noninvoluting congenital hemangioma].

PubMed

Zhongqiang, Wang; Yafei, Wang; Jiashuang, Zhou; Quan, Zhou; Lijuan, Yang; Li, Wang

2015-11-01

To investigate the clinical efficiency of electrocoagulation for the treatment of noninvoluting congenital hemangioma. Sixteen infants with noninvoluting congenital hemangioma who were admitted to our hospital from January 2011 to June 2013 were included in this study. Color Doppler ultrasound was used to determine the hemangioma location, as well as its size and depth. High frequency electrocoagulation was adopted for the treatment. The output power was set at 10-20 W. The probes were inserted around the tumor or at the surface of the tumor. After switching on for 1-2 seconds, the direction and position of the probe was modulated until covering the whole tumor. After the treatment, the absorption of tumor was about 3-6 months. The efficiency was evaluated during the follow-up. Tumor atrophy was obvious after treatment in all patients. The temperature around the tumor mass was decreased, and the aberrant blood signals were decreased under the ultrasonic examination. Complete or partial atrophy were observed. The efficiency was graded as level I, II, III, IV in 0, 2, 9 and 5 patients, respectively. One patient showed local infection due to improper nursing, which was completely relieved after corresponding treatment. No severe adverse events were observed. High-frequency electrocoagulation is effective for treating noninvoluting congenital hemangioma through coagulating the aberrant blood vessels in the tumor, interrupting the vascular endothelial cell, blocking the aberrant blood flow, as well as leading to atrophy and absorption of tumor mass. Besides, no obvious scar is observed after the surgery.

The Relationship of Grade Span in 9th Grade to Math Achievement in High School

ERIC Educational Resources Information Center

West, John; Miller, Mary Lou; Myers, Jim; Norton, Timothy

2015-01-01

Purpose, Scope, and Method of Study: The purpose of this study was to determine if a correlation exists between grade span for ninth grade and gains in math achievement test scores in 10th grade and 12th grade. A quantitative, longitudinal, correlational research design was employed to investigate the research questions. The population was high…

Prevalence of abnormal anal cytology and high-grade squamous intraepithelial lesions among a cohort of HIV-infected men who have sex with men.

PubMed

Sendagorta, Elena; Herranz, Pedro; Guadalajara, Hector; Bernardino, Jose Ignacio; Viguer, Jose María; Beato, María José; García-Olmo, Damian; Peña, Jose María

2014-04-01

The incidence of anal cancer among HIV-infected patients is higher than that in other populations. Anal high-grade squamous intraepithelial lesions are considered precursors to invasive squamous-cell carcinomas and are strongly associated to high-risk human papillomavirus infection. The aim of this study is to determine the prevalence of anal high-grade squamous intraepithelial lesions through screening based on cytology and high-resolution anoscopy with biopsy in a cohort of HIV-infected men who have sex with men. This investigation is an observational cross-sectional cohort study. The study was conducted in the HIV unit of a tertiary hospital in Spain. Three hundred HIV-infected men who have sex with men participated. Physical examination led to a diagnosis of perianal squamous-cell carcinoma and high-grade squamous intraepithelial lesions in 2 patients who were then excluded. Anal liquid cytology was performed. Patients with cytological abnormalities underwent high-resolution anoscopy and biopsy. The primary outcome measured was biopsy-proven high-grade squamous intraepithelial lesions. The median age was 41 ± 10.5 years. The mean and nadir CD4 cell counts were 651 ± 205 cells/mm(3) (interquartile range, 438-800) and 273 ± 205 cells/mm(3) (interquartile range, 131-362). High-risk human papillomavirus was detected in 80.9% of patients, and human papillomavirus 16 was detected in 35.9% of patients. The mean number of human papillomavirus genotypes was 4.6 ± 2.9 (CI, 2-6). Anal cytology was abnormal in 40.9% of patients (n = 122/298; interquartile range, 35.4%-46.6%). High-resolution anoscopy and biopsies were performed in 119 patients. The results of histological analyses were as follows: normal, 7.7% (n = 23); condyloma, 4.3% (n = 13); anal intraepithelial neoplasia 1, 5.7% (n = 17); anal intraepithelial neoplasia 2, 14% (n = 42); and anal intraepithelial neoplasia 3, 8% (n = 24). The overall prevalence of high-grade squamous intraepithelial lesions among patients with abnormal cytology was 54% (95% CI, 45.1%-62.8%). A diagnosis of high-grade squamous intraepithelial lesions was associated with human papillomavirus 16 and human papillomavirus 51 infection, and with detection of a higher number of human papillomavirus genotypes. High-resolution anoscopy was only performed in patients with abnormal cytology. The prevalence of high-risk human papillomavirus infection and high-grade squamous intraepithelial lesions is high in our cohort. Physical examination enabled straightforward diagnosis of perianal high-grade squamous intraepithelial lesions and squamous-cell carcinoma in 2 patients.