1. U.S. Route 250 grade separation structure. This reinforced concrete, ...
1. U.S. Route 250 grade separation structure. This reinforced concrete, rigid frame structure was built in 1941. Its relatively flat arch provided maximum useful clearance in a short span and the physics of the design eliminated the need for extensive abutments to contain the thrust of traditional arches, making it ideally suited as a grade separation structure. BLRI designers made extensive use of theses bridges for crossing small streams and creeks, and grade separation structures, ornamenting them with a rustic stone facade. View is of the south-southeast elevation. - Blue Ridge Parkway, Between Shenandoah National Park & Great Smoky Mountains, Asheville, Buncombe County, NC
206. Big Witch Road grade separation structure. This concrete box ...
206. Big Witch Road grade separation structure. This concrete box culvert, built in 1950, is unusual in that the culvert's concrete bottom extends beyond the structure to the ends of its perpendicular wing walls. Facing northeast. - Blue Ridge Parkway, Between Shenandoah National Park & Great Smoky Mountains, Asheville, Buncombe County, NC
92. Interstate 77 grade separation structure. This 377 four span ...
92. Interstate 77 grade separation structure. This 377 four span structure, built in 1974, is typical of most interstate bridges built in America in recent years, except for its curving alignment which helps control the visual experience of the parkway motorist. Facing west. - Blue Ridge Parkway, Between Shenandoah National Park & Great Smoky Mountains, Asheville, Buncombe County, NC
55. Virginia Route 688 grade separation structure. This structure, built ...
55. Virginia Route 688 grade separation structure. This structure, built in 1960, is an example of several concrete box culverts built primarily in the late 1950's and early 1960's. They are simply plain concrete with now ornamentation. These structures were used only on lesser used secondary paved roads or dirt roads. View is looking south. - Blue Ridge Parkway, Between Shenandoah National Park & Great Smoky Mountains, Asheville, Buncombe County, NC
The Case of Effort Variables in Student Performance.
ERIC Educational Resources Information Center
Borg, Mary O.; And Others
1989-01-01
Tests the existence of a structural shift between above- and below-average students in the econometric models that explain students' grades in principles of economics classes. Identifies a structural shift and estimates separate models for above- and below-average students. Concludes that separate models as well as educational policies are…
Analysis and design of on-grade reinforced concrete track support structures
NASA Technical Reports Server (NTRS)
Mclean, F. G.; Williams, R. D.; Greening, L. R.
1972-01-01
For the improvement of rail service, the Department of Transportation, Federal Rail Administration, is sponsoring a test track on the Atchison, Topeka, and Santa Fe Railway. The test track will contain nine separate rail support structures, including one conventional section for control and three reinforced concrete structures on grade, one slab and two beam sections. The analysis and design of these latter structures was accomplished by means of the finite element method, NASTRAN, and is presented.
49 CFR 1242.20 - Highway grade crossings (accounts XX-17-22 and XX-18-22).
Code of Federal Regulations, 2010 CFR
2010-10-01
... 49 Transportation 9 2010-10-01 2010-10-01 false Highway grade crossings (accounts XX-17-22 and XX... RAILROADS 1 Operating Expenses-Way and Structures § 1242.20 Highway grade crossings (accounts XX-17-22 and XX-18-22). Separate running and switching common expenses according to distribution of the running...
Graded porous inorganic materials derived from self-assembled block copolymer templates.
Gu, Yibei; Werner, Jörg G; Dorin, Rachel M; Robbins, Spencer W; Wiesner, Ulrich
2015-03-19
Graded porous inorganic materials directed by macromolecular self-assembly are expected to offer unique structural platforms relative to conventional porous inorganic materials. Their preparation to date remains a challenge, however, based on the sparsity of viable synthetic self-assembly pathways to control structural asymmetry. Here we demonstrate the fabrication of graded porous carbon, metal, and metal oxide film structures from self-assembled block copolymer templates by using various backfilling techniques in combination with thermal treatments for template removal and chemical transformations. The asymmetric inorganic structures display mesopores in the film top layers and a gradual pore size increase along the film normal in the macroporous sponge-like support structure. Substructure walls between macropores are themselves mesoporous, constituting a structural hierarchy in addition to the pore gradation. Final graded structures can be tailored by tuning casting conditions of self-assembled templates as well as the backfilling processes. We expect that these graded porous inorganic materials may find use in applications including separation, catalysis, biomedical implants, and energy conversion and storage.
NASA Astrophysics Data System (ADS)
Bojarska, Agata; Goss, Jakub; Stanczyk, Szymon; Makarowa, Irina; Schiavon, Dario; Czernecki, Robert; Suski, Tadeusz; Perlin, Piotr
2018-04-01
In this work, we investigate the role of the electron blocking layer (EBL) in laser diodes based on a graded index separate confinement heterostructure. We compare two sets of devices with very different EBL aluminum composition (3% and 12%) and design (graded and superlattice). The results of electro-optical characterization of these laser diodes reveal surprisingly modest role of electron blocking layer composition in determination of the threshold current and the differential efficiency values. However, EBL structure influences the operating voltage, which is decreased for devices with lower EBL and superlattice EBL. We observe also the differences in the thermal stability of devices - characteristic temperature is lower for lasers with 3% Al in EBL.
ERIC Educational Resources Information Center
Johnson, Erik
2017-01-01
The purpose of this study was to examine the effect of two different reciprocal peer-assisted learning (PAL) arrangements on music achievement and learner engagement in the secondary instrumental music classroom. Using a quasi-experimental design, students from six separate seventh-grade bands from one large urban/suburban school district (N =…
Colorado statewide historic bridge inventory.
DOT National Transportation Integrated Search
2011-05-01
The purpose of the Colorado statewide historic bridge inventory was to document and evaluate the National : Register of Historic Places eligibility all on-system highway bridges and grade separation structures built in : Colorado between 1959 and 196...
Separate versus Concurrent Calibration Methods in Vertical Scaling.
ERIC Educational Resources Information Center
Karkee, Thakur; Lewis, Daniel M.; Hoskens, Machteld; Yao, Lihua; Haug, Carolyn
Two methods to establish a common scale across grades within a content area using a common item design (separate and concurrent) have previously been studied under simulated conditions. Separate estimation is accomplished through separate calibration and grade-by-grade chained linking. Concurrent calibration established the vertical scale in a…
52. Virginia Route 666. This single span structure, built in ...
52. Virginia Route 666. This single span structure, built in 1962, is an example of a spandrel arch grade separation structure with a roman arch over a state secondary road. The bridge is constructed of reinforced concrete, backfilled with earth and has a thick stone veneer. Looking east-northeast at elevation. - Blue Ridge Parkway, Between Shenandoah National Park & Great Smoky Mountains, Asheville, Buncombe County, NC
Grading of direct laryngoscopy. A survey of current practice.
Cohen, A M; Fleming, B G; Wace, J R
1994-06-01
One hundred and twenty anaesthetists (30 of each grade), from three separate regions, were interviewed as to how they recorded the appearance of laryngeal structures at direct laryngoscopy and about their knowledge of the commonly used numerical grading system. About two-thirds of anaesthetists surveyed (69.2%) used the numerical grading system, but of these, over half could not identify a 'grade 2' laryngoscopic appearance correctly. Of anaesthetists who did not use the numerical method, over half could not correctly state the difference between a 'grade 2' and a 'grade 3' laryngoscopic appearance. Over 40% of anaesthetists stated incorrectly that the grading should be made on the initial view, even when laryngeal pressure had been needed. Junior anaesthetists were more likely to use the numerical method of recording. The results show that there is unacceptable uncertainty and inaccuracy in the use of the numerical grading system by users as well as non-users, which makes the current routine clinical use of the numerical grading system unsatisfactory.
An evaluation of the systems approach to bridge design.
DOT National Transportation Integrated Search
1974-01-01
This study contains the findings from a survey of available integrated computer systems for bridge analysis and design, along with a sample design of a grade separation structure using the two leading design systems, BEST and STRC. It appears that in...
Language Arts Curriculum Guide. Grades 7-9
ERIC Educational Resources Information Center
Duval County Schools, Jacksonville, FL.
This language arts curriculum guide was developed for use in grades 7, 8 and 9 in the Duval County Public Schools, Jacksonville, Florida. The courses covered are English (separate courses for grades 7, 8, and 9), Debate (grades 9-12), Oral Communication/Public Speaking (grades 9-12), and Advanced English (separate courses for grades 7, 8, and 9).…
Compact flexible multifrequency splitter based on plasmonic graded metallic grating arc waveguide.
Han, Chao; Wang, Zhaohong; Chu, Yangyang; Zhao, Xiaodan; Zhang, Xuanru
2018-04-15
A compact flexible multifrequency splitter based on an arc waveguide constructed of plasmonic metallic grating structures with graded-height T-grooves is proposed and studied. The dispersion curves and cutoff frequencies of the plasmonic grating waveguides with different T-groove metallic grating heights are different. The guided spoof surface plasmonic polariton waves at different frequencies can be localized at dissimilar angles along the graded grating arc waveguide. The output flexibility at an arbitrary groove for different frequencies is realized by introducing an additional symmetrical T-groove structure as an output. The compact four-, seven-, and eight-output frequency splitters demonstrate its flexible multifrequency separation capability at different output angle locations, while the dimensional size of the frequency splitters is not increased. Measurement results at the microwave frequency display excellent agreement with numerical simulation results.
Ge/graded-SiGe multiplication layers for low-voltage and low-noise Ge avalanche photodiodes on Si
NASA Astrophysics Data System (ADS)
Miyasaka, Yuji; Hiraki, Tatsurou; Okazaki, Kota; Takeda, Kotaro; Tsuchizawa, Tai; Yamada, Koji; Wada, Kazumi; Ishikawa, Yasuhiko
2016-04-01
A new structure is examined for low-voltage and low-noise Ge-based avalanche photodiodes (APDs) on Si, where a Ge/graded-SiGe heterostructure is used as the multiplication layer of a separate-absorption-carrier-multiplication structure. The Ge/SiGe heterojunction multiplication layer is theoretically shown to be useful for preferentially enhancing impact ionization for photogenerated holes injected from the Ge optical-absorption layer via the graded SiGe, reflecting the valence band discontinuity at the Ge/SiGe interface. This property is effective not only for the reduction of operation voltage/electric field strength in Ge-based APDs but also for the reduction of excess noise resulting from the ratio of the ionization coefficients between electrons and holes being far from unity. Such Ge/graded-SiGe heterostructures are successfully fabricated by ultrahigh-vacuum chemical vapor deposition. Preliminary pin diodes having a Ge/graded-SiGe multiplication layer act reasonably as photodetectors, showing a multiplication gain larger than those for diodes without the Ge/SiGe heterojunction.
Genin, Guy M.; Birman, Victor
2009-01-01
Reinforcement of fibrous composites by stiff particles embedded in the matrix offers the potential for simple, economical functional grading, enhanced response to mechanical loads, and improved functioning at high temperatures. Here, we consider laminated plates made of such a material, with spherical reinforcement tailored by layer. The moduli for this material lie within relatively narrow bounds. Two separate moduli estimates are considered: a “two-step” approach in which fibers are embedded in a homogenized particulate matrix, and the Kanaun-Jeulin (2001) approach, which we re-derive in a simple way using the Benveniste (1988) method. Optimal tailoring of a plate is explored, and functional grading is shown to improve the performance of the structures considered. In the example of a square, simply supported, cross-ply laminated panel subjected to uniform transverse pressure, a modest functional grading offers significant improvement in performance. A second example suggests superior blast resistance of the panel achieved at the expense of only a small increase in weight. PMID:23874001
ERIC Educational Resources Information Center
Tirosh, Dina; Stavy, Ruth
A study was conducted in Israel to determine effects of external similarity in problem structure on students' responses. Fifty students from each of the 7th, 8th, 10th, and 12th grade levels were presented with three problems involving successive divisions that were similar in structure. The problems asked separately whether the processes of…
Lansford, Jennifer E.; Malone, Patrick S.; Castellino, Domini R.; Dodge, Kenneth A.; Pettit, Gregory S.; Bates, John E.
2009-01-01
This study examined whether the occurrence and timing of parental separation or divorce was related to trajectories of academic grades and mother- and teacher-reported internalizing and externalizing problems. The authors used hierarchical linear models to estimate trajectories for children who did and did not experience their parents' divorce or separation in kindergarten through 10th grade (N = 194). A novel approach to analyzing the timing of divorce/separation was adopted, and trajectories were estimated from 1 year prior to the divorce/separation to 3 years after the event. Results suggest that early parental divorce/separation is more negatively related to trajectories of internalizing and externalizing problems than is later divorce/separation, whereas later divorce/separation is more negatively related to grades. One implication of these findings is that children may benefit most from interventions focused on preventing internalizing and externalizing problems, whereas adolescents may benefit most from interventions focused on promoting academic achievement. PMID:16756405
Lansford, Jennifer E; Malone, Patrick S; Castellino, Domini R; Dodge, Kenneth A; Pettit, Gregory S; Bates, John E
2006-06-01
This study examined whether the occurrence and timing of parental separation or divorce was related to trajectories of academic grades and mother- and teacher-reported internalizing and externalizing problems. The authors used hierarchical linear models to estimate trajectories for children who did and did not experience their parents' divorce or separation in kindergarten through 10th grade (N = 194). A novel approach to analyzing the timing of divorce/separation was adopted, and trajectories were estimated from 1 year prior to the divorce/separation to 3 years after the event. Results suggest that early parental divorce/separation is more negatively related to trajectories of internalizing and externalizing problems than is later divorce/separation, whereas later divorce/separation is more negatively related to grades. One implication of these findings is that children may benefit most from interventions focused on preventing internalizing and externalizing problems, whereas adolescents may benefit most from interventions focused on promoting academic achievement. ((c) 2006 APA, all rights reserved).
25. Otter Creek Bridge #2. View of the stone facing ...
25. Otter Creek Bridge #2. View of the stone facing common on nearly all concrete box culverts. The stone faced arch mimics rigid frame structures. Culverts were used for a variety of purposes from small stream crossings to grade separation structures for farmers whose land was split by the parkway. Looking northeast. - Blue Ridge Parkway, Between Shenandoah National Park & Great Smoky Mountains, Asheville, Buncombe County, NC
Incorporating a Rich Media Presentation Format into a Lecture-Based Course Structure
ERIC Educational Resources Information Center
Moss, Nicholas
2005-01-01
The e-syllabus is a set of Web pages in which each course in the curriculum is assigned a "course page" and multiple "session pages." Course pages have a standardized format that provides course objectives, course policies, required or recommended textbooks, grading scales, and faculty listings. A separate session page is…
Impact of grade separator on pedestrian risk taking behavior.
Khatoon, Mariya; Tiwari, Geetam; Chatterjee, Niladri
2013-01-01
Pedestrians on Delhi roads are often exposed to high risks. This is because the basic needs of pedestrians are not recognized as a part of the urban transport infrastructure improvement projects in Delhi. Rather, an ever increasing number of cars and motorized two-wheelers encourage the construction of large numbers of flyovers/grade separators to facilitate signal free movement for motorized vehicles, exposing pedestrians to greater risk. This paper describes the statistical analysis of pedestrian risk taking behavior while crossing the road, before and after the construction of a grade separator at an intersection of Delhi. A significant number of pedestrians are willing to take risks in both before and after situations. The results indicate that absence of signals make pedestrians behave independently, leading to increased variability in their risk taking behavior. Variability in the speeds of all categories of vehicles has increased after the construction of grade separators. After the construction of the grade separator, the waiting time of pedestrians at the starting point of crossing has increased and the correlation between waiting times and gaps accepted by pedestrians show that after certain time of waiting, pedestrians become impatient and accepts smaller gap size to cross the road. A Logistic regression model is fitted by assuming that the probability of road crossing by pedestrians depends on the gap size (in s) between pedestrian and conflicting vehicles, sex, age, type of pedestrians (single or in a group) and type of conflicting vehicles. The results of Logistic regression explained that before the construction of the grade separator the probability of road crossing by the pedestrian depends on only the gap size parameter; however after the construction of the grade separator, other parameters become significant in determining pedestrian risk taking behavior. Copyright © 2012 Elsevier Ltd. All rights reserved.
NASA Technical Reports Server (NTRS)
Derry, P. L.; Chen, H. Z.; Morkoc, H.; Yariv, A.; Lau, K. Y.
1988-01-01
Broad area graded-index separate-confinement heterostructure single quantum well lasers grown by molecular-beam epitaxy (MBE) with threshold current density as low as 93 A/sq cm (520 microns long) have been fabricated. Buried lasers formed from similarly structured MBE material with liquid phase epitaxy regrowth had threshold currents at submilliampere levels when high reflectivity coatings were applied to the end facets. A CW threshold current of 0.55 mA was obtained for a laser with facet reflectivities of about 80 percent, a cavity length of 120 micron, and an active region stripe width of 1 micron. These devices driven directly with logic level signals have switch-on delays less than 50 ps without any current prebias. Such lasers permit fully on-off switching while at the same time obviating the need for bias monitoring and feedback control.
DOE Office of Scientific and Technical Information (OSTI.GOV)
Nelson, A. J.; Voss, L. F.; Beck, P. R.
We subjected device-grade TlBr to various chemical treatments used in room temperature radiation detector fabrication to determine the resulting surface composition and electronic structure. As-polished TlBr was treated separately with HCl, SOCl 2, Br:MeOH and HF solutions. High-resolution photoemission measurements on the valence band electronic structure and Tl 4f, Br 3d, Cl 2p and S 2p core lines were used to evaluate surface chemistry and shallow heterojunction formation. Surface chemistry and valence band electronic structure were correlated with the goal of optimizing the long-term stability and radiation response.
Separate but Correlated: The Latent Structure of Space and Mathematics across Development
ERIC Educational Resources Information Center
Mix, Kelly S.; Levine, Susan C.; Cheng, Yi-Ling; Young, Chris; Hambrick, D. Zachary; Ping, Raedy
2016-01-01
The relations among various spatial and mathematics skills were assessed in a cross-sectional study of 854 children from kindergarten, third, and sixth grades (i.e., 5 to 13 years of age). Children completed a battery of spatial mathematics tests and their scores were submitted to exploratory factor analyses both within and across domains. In the…
Viterbori, Paola; Usai, M Carmen; Traverso, Laura; De Franchis, Valentina
2015-12-01
This longitudinal study analyzes whether selected components of executive function (EF) measured during the preschool period predict several indices of math achievement in primary school. Six EF measures were assessed in a sample of 5-year-old children (N = 175). The math achievement of the same children was then tested in Grades 1 and 3 using both a composite math score and three single indices of written calculation, arithmetical facts, and problem solving. Using previous results obtained from the same sample of children, a confirmatory factor analysis examining the latent EF structure in kindergarten indicated that a two-factor model provided the best fit for the data. In this model, inhibition and working memory (WM)-flexibility were separate dimensions. A full structural equation model was then used to test the hypothesis that math achievement (the composite math score and single math scores) in Grades 1 and 3 could be explained by the two EF components comprising the kindergarten model. The results indicate that the WM-flexibility component measured during the preschool period substantially predicts mathematical achievement, especially in Grade 3. The math composite scores were predicted by the WM-flexibility factor at both grade levels. In Grade 3, both problem solving and arithmetical facts were predicted by the WM-flexibility component. The results empirically support interventions that target EF as an important component of early childhood mathematics education. Copyright © 2015 Elsevier Inc. All rights reserved.
Potyrailo, Radislav A.; Starkey, Timothy A.; Vukusic, Peter; Ghiradella, Helen; Vasudev, Milana; Bunning, Timothy; Naik, Rajesh R.; Tang, Zhexiong; Larsen, Michael; Deng, Tao; Zhong, Sheng; Palacios, Manuel; Grande, James C.; Zorn, Gilad; Goddard, Gregory; Zalubovsky, Sergey
2013-01-01
For almost a century, the iridescence of tropical Morpho butterfly scales has been known to originate from 3D vertical ridge structures of stacked periodic layers of cuticle separated by air gaps. Here we describe a biological pattern of surface functionality that we have found in these photonic structures. This pattern is a gradient of surface polarity of the ridge structures that runs from their polar tops to their less-polar bottoms. This finding shows a biological pattern design that could stimulate numerous technological applications ranging from photonic security tags to self-cleaning surfaces, gas separators, protective clothing, sensors, and many others. As an important first step, this biomaterial property and our knowledge of its basis has allowed us to unveil a general mechanism of selective vapor response observed in the photonic Morpho nanostructures. This mechanism of selective vapor response brings a multivariable perspective for sensing, where selectivity is achieved within a single chemically graded nanostructured sensing unit, rather than from an array of separate sensors. PMID:24019497
Narins, Rhoda S; Beer, Kenneth
2006-09-01
For over five decades, liquid injectable silicone has been used for soft-tissue augmentation. Its use has engendered polarized reactions from the public and from physicians. Adherents of this product tout its inert chemical structure, ease of use, and low cost. Opponents of silicone cite the many reports of complications, including granulomas, pneumonitis, and disfiguring nodules that are usually the result of large-volume injection and/or industrial grade or adulterated material. Unfortunately, as recently as 2006, reports in The New England Journal of Medicine and The New York Times failed to distinguish between the use of medical grade silicone injected by physicians trained in the microdroplet technique and the use of large volumes of industrial grade products injected by unlicensed or unskilled practitioners. This review separates these two markedly different procedures. In addition, it provides an overview of the chemical structure of liquid injectable silicone, the immunology of silicone reactions within the body, treatment for cosmetic improvement including human immunodeficiency virus lipoatrophy, technical considerations for its injection, complications seen following injections, and some considerations of the future for silicone soft-tissue augmentation.
Xue, Mianqiang; Xu, Zhenming
2013-05-07
Technologies could be integrated in different ways into automatic recycling lines for a certain kind of electronic waste according to practical requirements. In this study, a new kind of pneumatic separator with openings at the dust hooper was applied combing with electrostatic separation for recycling waste printed circuit boards. However, the flow pattern and the particles' movement behavior could not be obtained by experimental methods. To better control the separation quantity and the material size distribution, computational fluid dynamics was used to model the new pneumatic separator giving a detailed understanding of the mechanisms. Simulated results showed that the tangential velocity direction reversed with a relatively small value. Axial velocity exhibited two sharp decreases at the x axis. It is indicated that the bottom openings at the dust hopper resulted in an enormous change in the velocity profile. A new phenomenon that was named dusting was observed, which would mitigate the effect of particles with small diameter on the following electrostatic separation and avoid materials plugging caused by the waste printed circuit boards special properties effectively. The trapped materials were divided into seven grades. Experimental results showed that the mass fraction of grade 5, grade 6, and grade 7 materials were 27.54%, 15.23%, and 17.38%, respectively. Grade 1 particles' mass fraction was reduced by 80.30% compared with a traditional separator. Furthermore, the monocrystalline silicon content in silicon element in particles with a diameter of -0.091 mm was 18.9%, higher than that in the mixed materials. This study could serve as guidance for the future material flow control, automation control, waste recycling, and semiconductor storage medium destruction.
Production of nuclear grade zirconium: A review
NASA Astrophysics Data System (ADS)
Xu, L.; Xiao, Y.; van Sandwijk, A.; Xu, Q.; Yang, Y.
2015-11-01
Zirconium is an ideal material for nuclear reactors due to its low absorption cross-section for thermal neutrons, whereas the typically contained hafnium with strong neutron-absorption is very harmful for zirconium as a fuel cladding material. This paper provides an overview of the processes for nuclear grade zirconium production with emphasis on the methods of Zr-Hf separation. The separation processes are roughly classified into hydro- and pyrometallurgical routes. The known pyrometallurgical Zr-Hf separation methods are discussed based on the following reaction features: redox characteristics, volatility, electrochemical properties and molten salt-metal equilibrium. In the present paper, the available Zr-Hf separation technologies are compared. The advantages and disadvantages as well as future directions of research and development for nuclear grade zirconium production are discussed.
Tobia, Valentina; Marzocchi, Gian Marco
2018-02-01
The Strengths and Difficulties Questionnaire [SDQ; (1)] is a multi-informant instrument for screening developmental psychopathology. This study contributes to the validation of the Italian SDQ-Parent version (SDQ-P), analyzing its factorial structure, providing norms and investigating cross-informant agreement (parents-teachers). The SDQ-P and the SDQ-Teacher version (SDQ-T) were completed for 1917 primary and middle school students. Confirmatory factor analyses were performed to compare two factorial structures: the original five-factor model and the structure obtained in a past Italian study (2). The original model showed the best fit. Significant differences by gender and school grade were found; norms were provided separately for males and females attending 1st-2nd, 3rd-5th and 6th-8th grades. Finally, the analysis of parent-teacher agreement showed correlations ranging from small (prosocial behavior) to large (hyperactivity-inattention). This study offers some reflections on the best way to use this instrument in a community sample.
ERIC Educational Resources Information Center
Laing, Donald
To determine the syntactic maturity of eighth grade Canadian students' writing, all the students in four eighth grade classes were asked to write two compositions--one narrative and one argumentative--two weeks apart. The syntactic maturity level of the resulting 81 narrative compositions and 82 written arguments was compared with the syntactic…
Salafia, Elizabeth H Blodgett; Gondoli, Dawn M; Corning, Alexandra F; Bucchianeri, Michaela M; Godinez, Nicole M
2009-07-01
Because bulimia nervosa is a problem among adolescents, it remains essential to examine its precursors. The specific etiologic chain investigated in this study is such that maternal psychological control first leads to adolescents' lowered self-competence, which in turn predicts bulimic symptoms. Self-report data were collected from 58 boys and 73 girls during sixth, seventh, and eighth grades. Participants reported on maternal psychological control, self-competence, and bulimic symptoms. Using structural equation modeling, we tested our hypothesized longitudinal indirect effects model separately for boys and girls. Results indeed indicated that high maternal psychological control in sixth grade led to lowered adolescents' self-competence in seventh grade, which in turn predicted increased bulimic symptoms in eighth grade for both boys and girls. This study uncovers one particular process wherein a psychologically controlling parenting style affects adolescents' development of bulimic symptoms, a finding that may be useful to researchers and clinicians.
Ibrahim, E F; Forrest, N P; Forester, A
2015-10-01
Misinterpretation of the Rockwood classification system for acromioclavicular joint (ACJ) separations has resulted in a trend towards using unilateral radiographs for grading. Further, the use of weighted views to 'unmask' a grade III injury has fallen out of favour. Recent evidence suggests that many radiographic grade III injuries represent only a partial injury to the stabilising ligaments. This study aimed to determine (1) whether accurate classification is possible on unilateral radiographs and (2) the efficacy of weighted bilateral radiographs in unmasking higher-grade injuries. Complete bilateral non-weighted and weighted sets of radiographs for patients presenting with an acromioclavicular separation over a 10-year period were analysed retrospectively, and they were graded I-VI according to Rockwood's criteria. Comparison was made between grading based on (1) a single antero-posterior (AP) view of the injured side, (2) bilateral non-weighted views and (3) bilateral weighted views. Radiographic measurements for cases that changed grade after weighted views were statistically compared to see if this could have been predicted beforehand. Fifty-nine sets of radiographs on 59 patients (48 male, mean age of 33 years) were included. Compared with unilateral radiographs, non-weighted bilateral comparison films resulted in a grade change for 44 patients (74.5%). Twenty-eight of 56 patients initially graded as I, II or III were upgraded to grade V and two of three initial grade V patients were downgraded to grade III. The addition of a weighted view further upgraded 10 patients to grade V. No grade II injury was changed to grade III and no injury of any severity was downgraded by a weighted view. Grade III injuries upgraded on weighted views had a significantly greater baseline median percentage coracoclavicular distance increase than those that were not upgraded (80.7% vs. 55.4%, p=0.015). However, no cut-off point for this value could be identified to predict an upgrade. The accurate classification of ACJ separation requires weighted bilateral comparative views. Attempts to predict grade on a single AP radiograph result in a gross underestimation of severity. The value of bilateral weighted views is to 'unmask' a grade V injury, and it is recommended as a first-line investigation. Copyright © 2015 Elsevier Ltd. All rights reserved.
17. MERRITT PARKWAY UNDER SPORT HILL ROAD, GRADE SEPARATION. Photocopy ...
17. MERRITT PARKWAY UNDER SPORT HILL ROAD, GRADE SEPARATION. Photocopy of drawing (original in Connecticut Department of Transportation, Wethersfield); Connecticut State Highway Department, Approved February 1936. - Merritt Parkway, Bridge No. 744, Spanning Merritt Parkway at Route 59, Fairfield, Fairfield County, CT
Ang, Hui-Gek; Koh, Jeremy Meng-Yeow; Lee, Jeffrey; Pua, Yong-Hao
2016-02-19
No instruments, to our knowledge, exist to assess leadership competency in existing and emerging allied health professional (AHP) leaders. This paper describes the development and preliminary exploration of the psychometric properties of a leadership competency instrument for existing and emerging AHP leaders and examines (i) its factor structure, (ii) its convergent validity with the Leadership Practices Inventory (LPI), and (iii) its discriminative validity in AHPs with different grades. During development, we included 25 items in the AHEAD (Aspiring leaders in Healthcare-Empowering individuals, Achieving excellence, Developing talents) instrument. A cross-sectional study was then conducted in 106 high-potential AHPs from Singapore General Hospital (34 men and 72 women) of different professional grades (49 principal-grade AHPs, 41 senior-grade AHPs, and 16 junior-grade AHPs) who completed both AHEAD and LPI instruments. Exploratory factor analysis was used to test the theoretical structure of AHEAD. Spearman correlation analysis was performed to evaluate the convergent validity of AHEAD with LPI. Using proportional odds regression models, we evaluated the association of grades of AHPs with AHEAD and LPI. To assess discriminative validity, the c-statistics - a measure of discrimination - were derived from these ordinal models. As theorized, factor analysis suggested a two-factor solution, where "skills" and "values" formed separate factors. Internal consistency of AHEAD was excellent (α-values > 0.88). Total and component AHEAD and LPI scores correlated moderately (Spearman ρ-values, 0.37 to 0.58). The c-index for discriminating between AHP grades was higher for AHEAD than for the LPI (0.76 vs. 0.65). The factorial structure of AHEAD was generally supported in our study. AHEAD showed convergent validity with the LPI and outperformed the LPI in terms of discriminative validity. These results provide initial evidence for the use of AHEAD to assess leadership competency in AHPs.
NASA Astrophysics Data System (ADS)
Lv, Chao; Yang, Kun; Wen, Shu-ming; Bai, Shao-jun; Feng, Qi-cheng
2017-10-01
This paper proposes a new technique for preparation of high-grade titanium slag from Panzhihua vanadium titanomagnetite concentrate by reduction-melting-magnetic separation processing. Chemical analysis, x-ray diffraction, and scanning electron microscopy in conjunction with energy-dispersive spectroscopy were used to characterize the samples. The effective separation of iron and titanium slag could be realized by melting metallized pellets at 1550°C for 60 min with the addition of 1% CaO (basicity of 1.1) and 2% graphite powder. The small iron particles embedded in the slag could be removed by fine grinding and magnetic separation process. The grade of TiO2 in the obtained high-grade titanium slag reached 60.68% and the total recovery of TiO2 was 91.25%, which could be directly applied for producing titanium white by the sulfuric acid process. This technique provides an alternative method to use vanadium titanomagnetite concentrate of the Panzhihua area in China.
X-ray photoemission analysis of chemically modified TlBr surfaces for improved radiation detectors
Nelson, A. J.; Voss, L. F.; Beck, P. R.; ...
2013-01-12
We subjected device-grade TlBr to various chemical treatments used in room temperature radiation detector fabrication to determine the resulting surface composition and electronic structure. As-polished TlBr was treated separately with HCl, SOCl 2, Br:MeOH and HF solutions. High-resolution photoemission measurements on the valence band electronic structure and Tl 4f, Br 3d, Cl 2p and S 2p core lines were used to evaluate surface chemistry and shallow heterojunction formation. Surface chemistry and valence band electronic structure were correlated with the goal of optimizing the long-term stability and radiation response.
X-ray photoemission analysis of chemically modified TlBr surfaces for improved radiation detectors
NASA Astrophysics Data System (ADS)
Nelson, A. J.; Voss, L. F.; Beck, P. R.; Graff, R. T.; Conway, A. M.; Nikolic, R. J.; Payne, S. A.; Lee, J.-S.; Kim, H.; Cirignano, L.; Shah, K.
2013-04-01
Device-grade TlBr was subjected to various chemical treatments used in room temperature radiation detector fabrication to determine the resulting surface composition and electronic structure. As-polished TlBr was treated separately with HCl, SOCl2, Br:MeOH, and HF solutions. High-resolution photoemission measurements on the valence band electronic structure and Tl 4f, Br 3d, Cl 2p, and S 2p core lines were used to evaluate surface chemistry and shallow heterojunction formation. Surface chemistry and valence band electronic structure were correlated with the goal of optimizing the long-term stability and radiation response.
PHYSICAL BENEFICATION OF LOW-GRADE URANIUM ORES
DOE Office of Scientific and Technical Information (OSTI.GOV)
Butler, J.N.
1958-07-30
Investigations are presented of methods for the physi cal beneficiation of low-grade and other uranium ores. The investlgations which have been in progress since September 1952 cover work done on a variety of natural ores, as well as a certain amount of basic research on mixtures of synthetic or high-grade natural uranium minerais with various gangues. Methods of beneficlation investigated include flotation, wet and dry attroftioning, magnetic separation. electresiatie separation, and misceilaneous minor methods. A rapid, routine method oicolorimeiric determlnation of uranium was also developed in order to facilitaie analyzing of low-grade materials for uranium. This proeedure is presenied inmore » condensed form. (auth)« less
Martin, J N; Brooks, J C; Thompson, L D; Savell, J W; Harris, K B; May, L L; Haneklaus, A N; Schutz, J L; Belk, K E; Engle, T; Woerner, D R; Legako, J F; Luna, A M; Douglass, L W; Douglass, S E; Howe, J; Duvall, M; Patterson, K Y; Leheska, J L
2013-11-01
Beef nutrition is important to the worldwide beef industry. The objective of this study was to analyze proximate composition of eight beef rib and plate cuts to update the USDA National Nutrient Database for Standard Reference (SR). Furthermore, this study aimed to determine the influence of USDA Quality Grade on the separable components and proximate composition of the examined retail cuts. Carcasses (n=72) representing a composite of Yield Grade, Quality Grade, gender and genetic type were identified from six regions across the U.S. Beef plates and ribs (IMPS #109 and 121C and D) were collected from the selected carcasses and shipped to three university meat laboratories for storage, retail fabrication, cooking, and dissection and analysis of proximate composition. These data provide updated information regarding the nutrient content of beef and emphasize the influence of common classification systems (Yield Grade and Quality Grade) on the separable components, cooking yield, and proximate composition of retail beef cuts. Copyright © 2013 Elsevier Ltd. All rights reserved.
5 CFR 831.503 - Retirement based on involuntary separation.
Code of Federal Regulations, 2010 CFR
2010-01-01
... lower than the equivalent of two grades or pay levels below the employee's current grade or pay level, without consideration of the employee's eligibility to retain his or her current grade or pay under part... comparison rate of the grade or pay level that is two grades below that of the current position will be...
Should You Allow Your Students to Grade Their Own Homework?
ERIC Educational Resources Information Center
Simkin, Mark G.
2015-01-01
Allowing students to grade their own homework promises several advantages to both students and instructors. But does such a policy make sense? This paper reports the results of an experiment in which eight separate assignments completed by approximately 80 students were first graded by the students using a grading rubric, and then re-graded by a…
Coupled structural/thermal/electromagnetic analysis/tailoring of graded composite structures
NASA Technical Reports Server (NTRS)
Mcknight, R. L.; Huang, H.; Hartle, M.
1992-01-01
Accomplishments are described for the third years effort of a 5-year program to develop a methodology for coupled structural/thermal/electromagnetic analysis/tailoring of graded composite structures. These accomplishments include: (1) structural analysis capability specialized for graded composite structures including large deformation and deformation position eigenanalysis technologies; (2) a thermal analyzer specialized for graded composite structures; (3) absorption of electromagnetic waves by graded composite structures; and (4) coupled structural thermal/electromagnetic analysis of graded composite structures.
Photoemission analysis of chemically modified TlBr surfaces for improved radiation detectors
NASA Astrophysics Data System (ADS)
Nelson, A. J.; Lee, J.-S.; Stanford, J. A.; Grant, W. K.; Voss, L. F.; Beck, P. R.; Graff, R. T.; Swanberg, E. L.; Conway, A. M.; Nikolic, R. J.; Payne, S. A.; Kim, H.; Cirignano, L. J.; Shah, K.
2013-09-01
Device-grade TlBr was subjected to various chemical treatments used in room temperature radiation detector fabrication to determine the resulting surface composition and electronic structure. Samples of as polished TlBr were treated separately with 2%Br:MeOH, 10%HF, 10%HCl and 96%SOCl2 solutions. High-resolution photoemission measurements on the valence band electronic structure and Tl 4f, Br 3d, Cl 2p and S 2p core lines were used to evaluate surface chemistry. Results suggest anion substitution at the surface with subsequent shallow heterojunction formation. Surface chemistry and valence band electronic structure were further correlated with the goal of optimizing the long-term stability and radiation response.
QPI for prostate cancer diagnosis: quantitative separation of Gleason grades 3 and 4
NASA Astrophysics Data System (ADS)
Sridharan, Shamira; Macias, Virgilia; Tangella, Krishnarao; Kajdacsy-Balla, Andre; Popescu, Gabriel
2015-03-01
1 in 7 men receive a diagnosis of prostate cancer in their lifetime. The aggressiveness of the treatment plan adopted by the patient is strongly influenced by Gleason grade. Gleason grade is determined by the pathologist based on the level of glandular formation and complexity seen in the patient's biopsy. However, studies have shown that the disagreement rate between pathologists on Gleason grades 3 and 4 is high and this affects treatment options. We used quantitative phase imaging to develop an objective method for Gleason grading. Using the glandular solidity, which is the ratio of the area of the gland to a convex hull fit around it, and anisotropy of light scattered from the stroma immediately adjoining the gland, we were able to quantitatively separate Gleason grades 3 and 4 with 81% accuracy in 43 cases marked as difficult by pathologists.
NASA Astrophysics Data System (ADS)
Wang, L.; Kusky, T.
2009-12-01
High-precision 1:1,000 mapping of Yangkou Bay, eastern Sulu orogen, defines the structural geometry and history of the world’s most significant UHP (Ultrahigh Pressure) rock exposures. Four stages of folds are recognized in the UHP rocks and associated quartzo-feldspathic gneiss. Eclogite facies rootless F1 and isoclinal F2 folds are preserved locally in coesite-eclogite. Mylonitic to ultramylonitic cosesit-eclogite shear zones separate 5-10-meter-thick nappes of ultramafic-mafic UHP rocks from banded quartzo-feldspathic gneiss. These shear zones are folded, and progressively overprinted by amphibolite and greenschist facies shear zones that become wider with lower grade. The deformation sequences is explained by deep subduction of offscraped thrust slices of oceanic or lower continental crust, caught between the colliding North and South China cratons in the Mesozoic. After these slices were structurally isolated along the plate interface, they were rolled like ball-bearings, in the subduction channel during their exhumation, forming several generations of folds, sequentially lower-grade foliations and lineations, and intruded by several generations of in situ and exotically derived melts. The shear zones formed during different generations of deformation are wider with lower grades, suggesting that deep-crustal/upper mantle deformation operates efficiently (perhaps with more active crystallographic slip systems) than deformation at mid to upper crustal levels.
1992-08-01
professional sports franchises , fast food restaurants , or a widget factory as well as the uniformed services. The 7’ QRMC identified two additional...1990 ................. C-8 Figure C-7. Basic Pay as a Percentage of RMC, by Grade, 1991 ................... C-11 Figure C-8. Current Enlisted BAS vs ... independent survey. "* A separate but simplified system of special and incentive pays. "* Expense reimbursements. "* Other allowances and so-called fringe
Are Attitudes Toward Writing and Reading Separable Constructs? A Study With Primary Grade Children
Graham, Steve; Berninger, Virginia; Abbott, Robert
2012-01-01
This study examined whether or not attitude towards writing is a unique and separable construct from attitude towards reading for young, beginning writers. Participants were 128 first-grade children (70 girls and 58 boys) and 113 third-grade students (57 girls and 56 boys). Each child was individually administered a 24 item attitude measure, which contained 12 items assessing attitude towards writing and 12 parallel items for reading. Students also wrote a narrative about a personal event in their life. A factor analysis of the 24 item attitude measure provided evidence that generally support the contention that writing and reading attitudes are separable constructs for young beginning writers, as it yielded three factors: a writing attitude factor with 9 items, a reading attitude factor with 9 parallel items, and an attitude about literacy interactions with others factor containing 4 items (2 items in writing and 2 parallel items in reading). Further validation that attitude towards writing is a separable construct from attitude towards reading was obtained at the third-grade level, where writing attitude made a unique and significant contribution, beyond the other two attitude measures, to the prediction of three measures of writing: quality, length, and longest correct word sequence. At the first-grade level, none of the 3 attitude measures predicted students’ writing performance. Finally, girls had more positive attitudes concerning reading and writing than boys. PMID:22736933
Grade Crossing Protection in High-Speed, High-Density, Passenger-Service Rail Corridors
DOT National Transportation Integrated Search
1973-01-01
The report is a preliminary examination of special aspects of grade crossing protection for operation of high-speed passenger trains in rail corridors for which complete grade separation is not possible. Overall system needs and constraints are indic...
Jobmann, S; Buckup, J; Colcuc, C; Roessler, P P; Zimmermann, E; Schüttler, K F; Hoffmann, R; Welsch, F; Stein, T
2017-09-18
The consolidation of the acromioclavicular (AC) and coracoclavicular (CC) ligament complex after arthroscopically assisted stabilization of acute acromioclavicular joint (ACJ) separation is still under consideration. Fifty-five consecutive patients after arthroscopically assisted double-CC-bundle stabilization within 14 days after acute high-grade ACJ separation were studied prospectively. All patients were clinically analysed preoperatively (FU0) and post-operatively (FU1 = 6 months; FU2 = 12 months). The structural MRI assessments were performed at FU0 (injured ACJ) and at FU2 bilateral (radiologic control group) and assessed separately the ligament thickness and length at defined regions for the conoid, trapezoid and the superior AC ligament. Thirty-seven patients were assessed after 6.5 months and after 16.0 months. The 16-month MRI analysis revealed for all patients continuous ligament healing for the CC-complex and the superior AC ligament with in the average hypertrophic consolidation compared to the control side. Separate conoid and trapezoid strands (double-strand configuration) were detected in 27 of 37 (73%) patients, and a single-strand configuration was detected in 10 of 37 (27%) patients; both configurations showed similar CCD data. The ligament healing was not influenced by the point of surgery, age at surgery and heterotopic ossification. The clinical outcome was increased (FU0-FU2): Rowe, 47.7-97.0 pts.; TAFT, 3.9-10.6 pts.; NAS pain , 8.9-1.4 pts. (all P < 0.05). The arthroscopically assisted double-CC-bundle stabilization within 14 days after acute high-grade ACJ separation showed 16 months after surgery sufficient consolidations of the AC and double-CC ligament complex in 73%. III, Case series.
NASA Astrophysics Data System (ADS)
Rao, Gottumukkala Venkateswara; Markandeya, R.; Kumar, Rajan
2018-04-01
An attempt has been made to utilise Sub Grade Iron Ore by producing pellet grade concentrate from Deposit 5, Bacheli Complex, Bailadila, Chhattisgarh, India. The `as received' Run of Mine (ROM) sample assayed 40.80% Fe, 40.90% SiO2. Mineralogical studies indicated that the main ore mineral is Hematite and lone gangue mineral is Quartz. Mineral liberation studies indicated that, the ore mineral Hematite and gangue mineral Quartz are getting liberated below 100 microns. The stage crushed and ground sample was subjected to concentration by using a Multi Gravity Separator (MGS). Rougher Multi Gravity Separation (MGS) experimental results were optimised to recover highest possible iron values. A concentrate of 55.80% Fe with a yield of 61.73% by weight with a recovery of 84.42% Iron values was obtained in rougher MGS concentrate. Further experiments were carried out with rougher MGS concentrate to produce a concentrate suitable for commercial grade pellet concentrate. It was proved that a concentrate assaying 66.67% Fe, 3.12% SiO2 with an yield of 45.08% by weight and with a recovery of 73.67% iron values in the concentrate.
Code of Federal Regulations, 2010 CFR
2010-01-01
... Orders; Fruits, Vegetables, Nuts), DEPARTMENT OF AGRICULTURE TOMATOES GROWN IN FLORIDA Order Regulating... sorting or separation of tomatoes into grades, sizes, maturities, and packs for market purposes. ...
Faust, James J; Doudrick, Kyle; Yang, Yu; Capco, David G; Westerhoff, Paul
2016-01-01
Recent studies indicate the presence of nano-scale titanium dioxide (TiO2) as an additive in human foodstuffs, but a practical protocol to isolate and separate nano-fractions from soluble foodstuffs as a source of material remains elusive. As such, we developed a method for separating the nano and submicron fractions found in commercial-grade TiO2 (E171) and E171 extracted from soluble foodstuffs and pharmaceutical products (e.g., chewing gum, pain reliever, and allergy medicine). Primary particle analysis of commercial-grade E171 indicated that 54% of particles were nano-sized (i.e., < 100 nm). Isolation and primary particle analysis of five consumer goods intended to be ingested revealed differences in the percent of nano-sized particles from 32%‒58%. Separation and enrichment of nano- and submicron-sized particles from commercial-grade E171 and E171 isolated from foodstuffs and pharmaceuticals was accomplished using rate-zonal centrifugation. Commercial-grade E171 was separated into nano- and submicron-enriched fractions consisting of a nano:submicron fraction of approximately 0.45:1 and 3.2:1, respectively. E171 extracted from gum had nano:submicron fractions of 1.4:1 and 0.19:1 for nano- and submicron-enriched, respectively. We show a difference in particle adhesion to the cell surface, which was found to be dependent on particle size and epithelial orientation. Finally, we provide evidence that E171 particles are not immediately cytotoxic to the Caco-2 human intestinal epithelium model. These data suggest that this separation method is appropriate for studies interested in isolating the nano-sized particle fraction taken directly from consumer products, in order to study separately the effects of nano and submicron particles.
Yang, Yu; Capco, David G.; Westerhoff, Paul
2016-01-01
Recent studies indicate the presence of nano-scale titanium dioxide (TiO2) as an additive in human foodstuffs, but a practical protocol to isolate and separate nano-fractions from soluble foodstuffs as a source of material remains elusive. As such, we developed a method for separating the nano and submicron fractions found in commercial-grade TiO2 (E171) and E171 extracted from soluble foodstuffs and pharmaceutical products (e.g., chewing gum, pain reliever, and allergy medicine). Primary particle analysis of commercial-grade E171 indicated that 54% of particles were nano-sized (i.e., < 100 nm). Isolation and primary particle analysis of five consumer goods intended to be ingested revealed differences in the percent of nano-sized particles from 32%‒58%. Separation and enrichment of nano- and submicron-sized particles from commercial-grade E171 and E171 isolated from foodstuffs and pharmaceuticals was accomplished using rate-zonal centrifugation. Commercial-grade E171 was separated into nano- and submicron-enriched fractions consisting of a nano:submicron fraction of approximately 0.45:1 and 3.2:1, respectively. E171 extracted from gum had nano:submicron fractions of 1.4:1 and 0.19:1 for nano- and submicron-enriched, respectively. We show a difference in particle adhesion to the cell surface, which was found to be dependent on particle size and epithelial orientation. Finally, we provide evidence that E171 particles are not immediately cytotoxic to the Caco-2 human intestinal epithelium model. These data suggest that this separation method is appropriate for studies interested in isolating the nano-sized particle fraction taken directly from consumer products, in order to study separately the effects of nano and submicron particles. PMID:27798677
Geologic map of the Skykomish River 30- by 60-minute quadrangle, Washington
Tabor, R.W.; Frizzell, D.A.; Booth, D.B.; Waitt, R.B.; Whetten, J.T.; Zartman, R.E.
1993-01-01
From the eastern-most edges of suburban Seattle, the Skykomish River quadrangle stretches east across the low rolling hills and broad river valleys of the Puget Lowland, across the forested foothills of the North Cascades, and across high meadowlands to the bare rock peaks of the Cascade crest. The Straight Creek Fault, a major Pacific Northwest structure which almost bisects the quadrangle, mostly separates unmetamorphosed and low-grade metamorphic Paleozoic and Mesozoic oceanic rocks on the west from medium- to high-grade metamorphic rocks on the east. Within the quadrangle the lower grade rocks are mostly Mesozoic melange units. To the east, the higher-grade terrane is mostly the Chiwaukum Schist and related gneisses of the Nason terrane and invading mid-Cretaceous stitching plutons. The Early Cretaceous Easton Metamorphic Suite crops out on both sides of the Straight Creek fault and records it's dextral displacement. On the south margin of the quadrangle, the fault separates the lower Eocene Swauk Formation on the east from the upper Eocene and Oligocene(?) Naches Formation and, farther north, it's correlative Barlow Pass Volcanics the west. Stratigraphically equivalent rocks ot the Puget Group crop out farther to the west. Rocks of the Cascade magmatic arc are mostly represented by Miocene and Oligocene plutons, including the Grotto, Snoqualmie, and Index batholiths. Alpine river valleys in the quadrangle record multiple advances and retreats of alpine glaciers. Multiple advances of the Cordilleran ice sheet, originating in the mountains of British Columbia, Canada, have left an even more complex sequence of outwash and till along the western mountain front, up these same alpine river valleys, and over the Puget Lowland.
ERIC Educational Resources Information Center
Fiebig, Jennifer Nepper
2008-01-01
This study assessed 43 gifted adolescent females in the United States and Germany over a 4-year period. Initially the girls were assessed during their 7th or 8th grade and again for this current study during their 11th or 12th grade. Factors that were examined included the daughters' attachment to and psychological separation from their mothers,…
NASA Astrophysics Data System (ADS)
White, Terri Renee'
The primary purpose of the study was to examine different variables (i.e. science process skill ability, science attitudes, and parents' levels of expectation for their children in science, which may impinge on science education differently for males and females in grades five, seven, and nine. The research question addressed by the study was: What are the differences between science process skill ability, science attitudes, and parents' levels of expectation in science on the academic success of fifth, seventh, and ninth graders in science and do effects differ according to gender and grade level? The subjects included fifth, seven, and ninth grade students ( n = 543) and their parents (n = 474) from six rural, public elementary schools and two rural, public middle schools in Southern Mississippi. A two-way (grade x gender) multivariate analysis of variance (MANOVA) was used to determine the differences in science process skill abilities of females and males in grade five, seven, and nine. An additional separate two-way multivariate analysis of variance (grade x gender) was also used to determine the differences in science attitudes of males and females in grade five, seven, and nine. A separate analysis of variance (PPSEX [parent's gender]) with the effects being parents' gender was used to determine differences in parents' levels of expectation for their childrens' performance in science. An additional separate analysis of variance (SSEX [student's gender]) with the effects being the gender of the student was also used to determine differences in parents' levels of expectation for their childrens' performance in science. Results of the analyses indicated significant main effects for grade level (p < .001) and gender (p < .001) on the TIPS II. There was no significant grade by gender interaction on the TIPS II. Results for the TOSRA also indicated a significant main effect for grade (p < .001) and the interaction of grade by sex ( p < .001). On variable ATT 5 (enjoyment of science lessons), males' attitudes toward science decreased across the grade levels; whereas, females decreased from grade five to seven, but showed a significant increase from grade seven to nine. Results from the analysis of variance with the parent's gender as the main effect showed no significant difference. The analysis of variance with student's gender as the main effect showed no significant difference.
ERIC Educational Resources Information Center
Beyers, Wim; Goossens, Luc
2003-01-01
Examined the association between psychological separation and adjustment to university among college students. Found that two dimensions of psychological separation--independence from parents and positive separation feelings--predicted better adjustment to college life. Independence from parents was moderated by grade, gender, and perceived…
Evaluation of Production Version of the NASA Improved Inorganic-Organic Separator
NASA Technical Reports Server (NTRS)
Sheibley, D.
1983-01-01
The technology of an inorganic-organic (I/O) separator, which demonstrated improved flexibility, reduced cost, production feasibility and improved cycle life was developed. Substrates to replace asbestos and waterbased separator coatings to replace the solvent based coatings were investigated. An improved fuel cell grade asbestos sheet was developed and a large scale production capability for the solvent based I/O separator was demonstrated. A cellulose based substrate and a nonwoven polypropylene fiber substrate were evaluated as replacements for the asbestos. Both the cellulose and polypropylene substrates were coated with solvent based and water based coatings to produce a modified I/O separator. The solvent based coatings were modified to produce aqueous separator coatings with acceptable separator properties. A single ply fuel cell grade asbestos with a binder (BTA) was produced. It has shown to be an acceptable substrate for the solvent and water based separator coatings, an acceptable absorber for alkaline cells, and an acceptable matrix for alkaline fuel cells. The original solvent based separator (K19W1), using asbestos as a substrate, was prepared.
Science: Grade 7. Interim Guide.
ERIC Educational Resources Information Center
Manitoba Dept. of Education and Training, Winnipeg.
This guide is one of a set of 10 science guides, each covering a separate grade in Manitoba, together covering kindergarten through grade 9. The guides have been designed to provide a framework for building scientific concepts and developing the learning of process skills. They replace an earlier set of guides dated 1979. Each guide is essentially…
Can Business Students Forecast Their Own Grade?
ERIC Educational Resources Information Center
Hossain, Belayet; Tsigaris, Panagiotis
2013-01-01
This study examines grade expectations of two groups of business students for their final course mark. We separate students that are on average "better" forecasters on the basis of them not making significant forecast errors during the semester from those students that are poor forecasters of their final grade. We find that the better…
Science: Grade 6. Interim Guide.
ERIC Educational Resources Information Center
Manitoba Dept. of Education and Training, Winnipeg.
This guide is one of a set of 10 science guides, each covering a separate grade in Manitoba, together covering kindergarten through grade 9. The guides have been designed to provide a framework for building scientific concepts and developing the learning of process skills. They replace an earlier set of guides dated 1979. Each guide is essentially…
Science: Grade 8. Interim Guide.
ERIC Educational Resources Information Center
Manitoba Dept. of Education and Training, Winnipeg.
This guide is one of a set of 10 science guides, each covering a separate grade in Manitoba, together covering kindergarten through grade 9. The guides have been designed to provide a framework for building scientific concepts and developing the learning of process skills. They replace an earlier set of guides dated 1979. Each guide is essentially…
Solid Waste/Energy Curriculum.
ERIC Educational Resources Information Center
Vivan, V. Eugene; And Others
Provided are solid waste/energy curriculum materials for grades K-2, 3-4, 5-6, 7-9, and 10-12. Separate folders containing units of study (focusing on trash, litter, and recycling) are provided for kindergarten (four units), grade 1 (two units), and grade 2 (two units). Folders contain teachers' directions and activity cards which include picture…
Science: Grade 2. Interim Guide.
ERIC Educational Resources Information Center
Manitoba Dept. of Education and Training, Winnipeg.
This guide is one of a set of 10 science guides, each covering a separate grade in Manitoba, together covering kindergarten through grade 9. The guides have been designed to provide a framework for building scientific concepts and developing the learning of process skills. They replace an earlier set of guides dated 1979. Each guide is essentially…
Science: Grade 1. Interim Guide.
ERIC Educational Resources Information Center
Manitoba Dept. of Education and Training, Winnipeg.
This guide is one of a set of 10 science guides, each covering a separate grade in Manitoba, together covering kindergarten through grade 9. The guides have been designed to provide a framework for building scientific concepts and developing the learning of process skills. They replace an earlier set of guides dated 1979. Each guide is essentially…
34 CFR 200.20 - Making adequate yearly progress.
Code of Federal Regulations, 2010 CFR
2010-07-01
... paragraph (a) or (b) of this section separately in reading/language arts and in mathematics. (a)(1) A school... reading/language arts and mathematics in grades 3 through 8 and once in grades 10 through 12 required... the reading/language arts and mathematics assessments in the three grade spans required under § 200.5...
NASA Astrophysics Data System (ADS)
Saroj, Pradeep K.; Sahu, S. A.; Chaudhary, S.; Chattopadhyay, A.
2015-10-01
This paper investigates the propagation behavior of Love-type surface waves in three-layered composite structure with initial stress. The composite structure has been taken in such a way that a functionally graded piezoelectric material (FGPM) layer is bonded between initially stressed piezoelectric upper layer and an elastic substrate. Using the method of separation of variables, frequency equation for the considered wave has been established in the form of determinant for electrical open and short cases on free surface. The bisection method iteration technique has been used to find the roots of the dispersion relations which give the modes for electrical open and short cases. The effects of gradient variation of material constant and initial stress on the phase velocity of surface waves are discussed. Dependence of thickness on each parameter of the study has been shown explicitly. Study has been also done to show the existence of cut-off frequency. Graphical representation has been done to exhibit the findings. The obtained results are significant for the investigation and characterization of Love-type waves in FGPM-layered media.
Code of Federal Regulations, 2011 CFR
2011-10-01
... carrying Grade A liquids, separate discharge pipes may be fitted to each pressure-vacuum relief valve, or... which Grade B or C liquids are to be transported shall be fitted with individual pressure-vacuum relief... arrester or a pressure-vacuum relief valve. (d) Grade D or E liquids. Cargo tanks in which Grade D or E...
Code of Federal Regulations, 2012 CFR
2012-10-01
... carrying Grade A liquids, separate discharge pipes may be fitted to each pressure-vacuum relief valve, or... which Grade B or C liquids are to be transported shall be fitted with individual pressure-vacuum relief... arrester or a pressure-vacuum relief valve. (d) Grade D or E liquids. Cargo tanks in which Grade D or E...
Code of Federal Regulations, 2010 CFR
2010-10-01
... carrying Grade A liquids, separate discharge pipes may be fitted to each pressure-vacuum relief valve, or... which Grade B or C liquids are to be transported shall be fitted with individual pressure-vacuum relief... arrester or a pressure-vacuum relief valve. (d) Grade D or E liquids. Cargo tanks in which Grade D or E...
Code of Federal Regulations, 2014 CFR
2014-10-01
... carrying Grade A liquids, separate discharge pipes may be fitted to each pressure-vacuum relief valve, or... which Grade B or C liquids are to be transported shall be fitted with individual pressure-vacuum relief... arrester or a pressure-vacuum relief valve. (d) Grade D or E liquids. Cargo tanks in which Grade D or E...
Code of Federal Regulations, 2013 CFR
2013-10-01
... carrying Grade A liquids, separate discharge pipes may be fitted to each pressure-vacuum relief valve, or... which Grade B or C liquids are to be transported shall be fitted with individual pressure-vacuum relief... arrester or a pressure-vacuum relief valve. (d) Grade D or E liquids. Cargo tanks in which Grade D or E...
Soriano-Raya, Juan José; Miralbell, Júlia; López-Cancio, Elena; Bargalló, Núria; Arenillas, Juan Francisco; Barrios, Maite; Cáceres, Cynthia; Toran, Pere; Alzamora, Maite; Dávalos, Antoni; Mataró, Maria
2014-01-01
Cerebral white matter lesions (WMLs) have been consistently related to cognitive dysfunction but the role of white matter (WM) damage in cognitive impairment is not fully determined. Diffusion tensor imaging is a promising tool to explain impaired cognition related to WMLs. We investigated the separate association of high-grade periventricular hyperintensities (PVHs) and deep white matter hyperintensities (DWMHs) with fractional anisotropy (FA) in middle-aged individuals. We also assessed the predictive value to cognition of FA within specific WM tracts associated with high-grade WMLs. One hundred participants from the Barcelona-AsIA Neuropsychology Study were divided into groups based on low- and high-grade WMLs. Voxel-by-voxel FA were compared between groups, with separate analyses for high-grade PVHs and DWMHs. The mean FA within areas showing differences between groups was extracted in each tract for linear regression analyses. Participants with high-grade PVHs and participants with high-grade DWMHs showed lower FA in different areas of specific tracts. Areas showing decreased FA in high-grade DWMHs predicted lower cognition, whereas areas with decreased FA in high-grade PVHs did not. The predictive value to cognition of specific WM tracts supports the involvement of cortico-subcortical circuits in cognitive deficits only in DWMHs. PMID:24549185
Soriano-Raya, Juan José; Miralbell, Júlia; López-Cancio, Elena; Bargalló, Núria; Arenillas, Juan Francisco; Barrios, Maite; Cáceres, Cynthia; Toran, Pere; Alzamora, Maite; Dávalos, Antoni; Mataró, Maria
2014-05-01
Cerebral white matter lesions (WMLs) have been consistently related to cognitive dysfunction but the role of white matter (WM) damage in cognitive impairment is not fully determined. Diffusion tensor imaging is a promising tool to explain impaired cognition related to WMLs. We investigated the separate association of high-grade periventricular hyperintensities (PVHs) and deep white matter hyperintensities (DWMHs) with fractional anisotropy (FA) in middle-aged individuals. We also assessed the predictive value to cognition of FA within specific WM tracts associated with high-grade WMLs. One hundred participants from the Barcelona-AsIA Neuropsychology Study were divided into groups based on low- and high-grade WMLs. Voxel-by-voxel FA were compared between groups, with separate analyses for high-grade PVHs and DWMHs. The mean FA within areas showing differences between groups was extracted in each tract for linear regression analyses. Participants with high-grade PVHs and participants with high-grade DWMHs showed lower FA in different areas of specific tracts. Areas showing decreased FA in high-grade DWMHs predicted lower cognition, whereas areas with decreased FA in high-grade PVHs did not. The predictive value to cognition of specific WM tracts supports the involvement of cortico-subcortical circuits in cognitive deficits only in DWMHs.
ERIC Educational Resources Information Center
Wiebold, W. J.; Slaughter, Leon
1986-01-01
Reviews a study that examined the effects of laboratories on the grade performance of undergraduates in an introductory crop science course. Results indicated that students enrolled in lecture and laboratory concurrently did not receive higher lecture grades than students enrolled solely in lecture, but did have higher laboratory grades. (ML)
A Summative Program Evaluation of a Comprehensive 9th Grade Transition Program
ERIC Educational Resources Information Center
Roybal, Victoria M.
2011-01-01
The transition from 8th grade to 9th grade is one that is replete with challenges for students, especially for minority students who live in economically disadvantaged communities. One low-income, high minority comprehensive high school in the western United States implemented five separate strategies to create a freshman transition program to aid…
Phase Separation in Lean Grade Duplex Stainless Steel 2101
Garfinkel, D.; Poplawsky, Jonathan D.; Guo, Wei; ...
2015-08-19
The use of duplex stainless steels (DSS) in nuclear power generation systems is limited by thermal instability that leads to embrittlement in the temperature range of 204°C - 538°C. New lean grade alloys, such as 2101, offer the potential to mitigate these effects. Thermal embrittlement was quantified through impact toughness and hardness testing on samples of alloy 2101 after aging at 427°C for various durations (1-10,000 hours). Additionally, atom probe tomography (APT) was utilized in order to observe the kinetics of α-α’ separation and G-phase formation. Mechanical testing and APT data for two other DSS alloys, 2003 and 2205 weremore » used as a reference to 2101. The results show that alloy 2101 exhibits superior performance compared to the standard grade DSS alloy, 2205, but inferior to the lean grade alloy, 2003, in mechanical testing. APT data demonstrates that the degree of α-α’ separation found in alloy 2101 closely resembles that of 2205, and greatly exceeds 2003. Additionally, contrary to what was observed in 2003, 2101 demonstrated G-phase like precipitates after long aging times, though precipitates were not as abundant as was observed in 2205.« less
Effect of Spatial Titration on Task Performance
ERIC Educational Resources Information Center
Glowacki, Lawrence
1976-01-01
A reinforcement schedule and spatial titration method were used to determine task-reinforcement area separation most preferred and effective in two third-grade boys. Errors in task performance decreased task-reinforcement area separation, while correct responses in task performance increased task-reinforcement area separation. (Author)
Oral Language and Listening Comprehension: Same or Different Constructs?
2017-05-24
The purpose of this study was to add to our understanding of the dimensionality of oral language in children and to determine whether oral language and listening comprehension are separate constructs in children enrolled in preschool (PK) through 3rd grade. In the spring of the school year, children from 4 states (N = 1,869) completed multiple measures of oral language (i.e., expressive and receptive vocabulary and grammar) and listening comprehension as part of a larger study of the language bases of reading comprehension. Initial confirmatory factor analysis found evidence that measures of oral language and listening comprehension loaded on two separate factors in PK through 3rd grade; however, these factors were highly correlated at all grades. These results suggest that oral language and listening comprehension are best characterized as a single oral language construct in PK through 3rd grade. The implications for early identification and intervention are discussed.
An Individual or a Group Grade: Exploring Reward Structures and Motivation for Learning
ERIC Educational Resources Information Center
Collins, C. S.
2012-01-01
From a student perspective, grades are a central part in the educational experience. In an effort to learn more about student motivation for learning and grades, this study was designed to examine student reactions to the opportunity to choose between the traditional individual grading structure and a group grading structure where all students…
Ethnic Differences in Family Factors Related to Early Drug Initiation*
CATALANO, RICHARD F.; MORRISON, DIANE M.; WELLS, ELIZABETH A.; GILLMORE, MARY R.; IRITANI, BONITA; HAWKINS, J. DAVID
2007-01-01
The literature on family predictors of substance use for the general population is reviewed and compared to findings for three specific ethnic groups: black, white and Asian-Americans. Rates of substance use initiation are examined in a sample of 919 urban 5th-grade students. Ethnic differences on measures of family predictors are examined and significant ethnic differences are found on several of these factors. Finally, separate regressions for black, white and Asian American youths of family factors on the variety of substances initiated examine ethnic similarities and differences in predictors. The results demonstrate significant differences by ethnicity in family management practices, involvement in family activity, sibling deviance, parental disapproval of children's drinking and family structure. The regression equations identified unique as well as common predictors of the variety of substances initiated by the end of 5th grade. Implications of the results are discussed. PMID:1285743
Geological history of the west Libyan offshore and adjoining regions
DOE Office of Scientific and Technical Information (OSTI.GOV)
Benniran, M.M.; Taleb, T.M.; McCrossan, R.G.
1988-08-01
The continental margin of the African plate north of Libya is separated from the Saharan platform to the south by a major Variscan fault system running along the coastline. The structural evolution of three sedimentary basins within the margin is discussed. The Jeffara basin, onshore western Libya-southern Tunisia, formed as a right-lateral pull-part late in the Variscan event. When the strike-slip motion ceased in the Late Permian, the basin continued to subside thermally. The Sabratah (Tripolitanian) basin, offshore western Libya-southern Tunisia, and the Benghazi basin in the Sirte rise were both formed as left-lateral pull-aparts in the Late Triassic-Early Jurassic.more » From the Middle Jurassic to the present they have subsided thermally. Onshore the lower Mesozoic is characterized by continental and nearshore clastics, separated by an evaporite sequence of Late Triassic-Early Jurassic age. Offshore this sequence is thought to grade northward into open marine carbonates. Uplift along the edge of the Saharan platform during the Early Cretaceous sourced coarse clastics, which grade northward into a thick sequence of shallow-water carbonates. Throughout the Late Cretaceous and early Tertiary, high-energy carbonates were deposited around the flanks of the Sabratah basin, grading into deeper-water, fine-grained clastics and carbonates toward the center of the basin. The late Tertiary succession is dominated by clastics derived from the growing Tellian Atlas to the northwest. During the Mesozoic and Tertiary a thick sequence of carbonates was deposited on the Pelagian platform to the north of the Sabratah basin. Periodically the platform was exposed subaerially.« less
Betschart, Patrick; Zumstein, Valentin; Bentivoglio, Maico; Engeler, Daniel; Schmid, Hans-Peter; Abt, Dominik
2017-12-01
To assess the readability of the web-based patient education material provided by the European Association of Urology. English patient education materials (PEM) as available in May 2017 were obtained from the EAU website. Each topic was analyzed separately using six well-established readability assessment tools, including Flesch-Kincaid Grade Level (FKGL), SMOG Grade Level (SMOG), Coleman-Liau Index (CLI), Gunning Fog Index (GFI), Flesch Reading Ease Formula (FRE) and Fry Readability Graph (FRG). A total of 17 main topics were identified of which separate basic and in-depth information is provided for 14 topics. Calculation of grade levels (FKGL, SMOG, CLI, GFI) showed readability scores of 7th-13th grade for basic information, 8th-15th grade for in-depth information and 7th-15th grade for single PEM. Median FRE score was 54 points (range 45-65) for basic information and 56 points (41-64) for in-depth information. The FRG as a graphical assessment revealed only 13 valid results with an approximate 8th-17th grade level. The EAU provides carefully worked out PEM for 17 urological topics. Although improved readability compared to similar analyses was found, a simplification of certain chapters might be helpful to facilitate better patient understanding.
Code of Federal Regulations, 2010 CFR
2010-01-01
... 7 Agriculture 2 2010-01-01 2010-01-01 false Grade. 29.6018 Section 29.6018 Agriculture Regulations of the Department of Agriculture AGRICULTURAL MARKETING SERVICE (Standards, Inspections, Marketing... to other characteristics when they are of sufficient importance to be treated separately. ...
ERIC Educational Resources Information Center
Brookshire, Cathy A.
This paper outlines Standards of Learning for grades 6-12 students in Virginia that are covered when they attend live performances of William Shakespeare's plays. The paper details separate standards for each grade in English, subdivided into standards which fulfill requirements in Oral Language, Reading/Literature, Writing, and Research, along…
ERIC Educational Resources Information Center
Lekholm, Alli Klapp; Cliffordson, Christina
2008-01-01
The purpose of the study was to use multivariate multilevel techniques to investigate whether it was possible to separate different dimensions in grades that relate to subject-matter achievement and to other factors. Data were derived from The Gothenburg Educational Longitudinal Database (GOLD), and the subjects were 99,070 ninth-grade students…
USDA-ARS?s Scientific Manuscript database
The objective of this research was to develop an in-field apple presorting and grading system to separate undersized and defective fruit from fresh market-grade apples. To achieve this goal, a cost-effective machine vision inspection prototype was built, which consisted of a low-cost color camera, L...
Carter, Mark W.; Merschat, Arthur J.
2014-01-01
The contact between eastern Blue Ridge stratified rocks above Mesoproterozoic basement rocks is mostly faulted (Gossan Lead and Red Valley). The Callaway fault juxtaposes Ashe and Lynchburg rocks above Wills Ridge Formation. Alligator Back Formation rocks overlie Ashe and Lynchburg rocks along the Rock Castle Creek fault, which juxtaposes rocks of different metamorphism. The fault separates major structural domains: rocks with one penetrative foliation in the footwall, and pin-striped recrystallized compositional layering, superposed penetrative foliations, and cleavage characterize the hanging wall. These relationships are ambiguous along strike to the southwest, where the Ashe and Alligator Back formations are recrystallized at higher metamorphic grades.
Gutzweiler, Ludwig; Gleichmann, Tobias; Tanguy, Laurent; Koltay, Peter; Zengerle, Roland; Riegger, Lutz
2017-07-01
Gel electrophoresis is one of the most applied and standardized tools for separation and analysis of macromolecules and their fragments in academic research and in industry. In this work we present a novel approach for conducting on-demand electrophoretic separations of DNA molecules in open microfluidic (OM) systems on planar polymer substrates. The approach combines advantages of slab gel, capillary- and chip-based methods offering low consumable costs (<0.1$) circumventing cost-intensive microfluidic chip fabrication, short process times (5 min per analysis) and high sensitivity (4 ng/μL dsDNA) combined with reasonable resolution (17 bases). The open microfluidic separation system comprises two opposing reservoirs of 2-4 μL in volume, a semi-contact written gel line acting as separation channel interconnecting the reservoirs and sample injected into the line via non-contact droplet dispensing and thus enabling the precise control of the injection plug and sample concentration. Evaporation is prevented by covering aqueous structures with PCR-grade mineral oil while maintaining surface temperature at 15°C. The liquid gel line exhibits a semi-circular cross section of adaptable width (∼200-600 μm) and height (∼30-80 μm) as well as a typical length of 15-55 mm. Layout of such liquid structures is adaptable on-demand not requiring time consuming and repetitive fabrication steps. The approach was successfully demonstrated by the separation of a standard label-free DNA ladder (100-1000 bp) at 100 V/cm via in-line staining and laser induced fluorescent end-point detection using an automated prototype. © 2017 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.
Design Considerations for Siting Grade Control Structures
2001-12-01
require consideration before siting grade control structures. In the widest sense, the term grade control can be applied to any alteration in the...control structures. There are two basic types of grade control structures. One type can be referred to as a bed control structure as it is designed to...provide a hard point in the streambed that is capable of resisting the erosive forces of the degradational zone. The second type can be referred to
NASA Astrophysics Data System (ADS)
Alves Ribeiro, J.; Monteiro-Santos, F. A.; Pereira, M. F.; Díez Fernández, R.; Dias da Silva, Í.; Nascimento, C.; Silva, J. B.
2017-12-01
A new magnetotelluric (MT) survey comprising 17 MT soundings throughout a 30 km long N30°W transect in the Iberian autochthons domain of NW Iberia (Central Iberian Zone) is presented. The 2-D inversion model shows the resistivity structure of the continental crust up to 10 km depth, heretofore unavailable for this region of the Variscan Orogen. The MT model reveals a wavy structure separating a conductive upper layer underlain by a resistive layer, thus picturing the two main tectonic blocks of a large-scale D2 extensional shear zone (i.e., Pinhel shear zone). The upper layer represents a lower grade metamorphic domain that includes graphite-rich rocks. The lower layer consists of high-grade metamorphic rocks that experienced partial melting and are associated with granites (more resistive) emplaced during crustal thinning. The wavy structure is the result of superimposed crustal shortening responsible for the development of large-scale D3 folds (e.g., Marofa synform), later deflected and refolded by a D4 strike-slip shear zone (i.e., Juzbado-Penalva do Castelo shear zone). The later contribution to the final structure of the crust is marked by the intrusion of postkinematic granitic rocks and the propagation of steeply dipping brittle fault zones. Our study demonstrates that MT imaging is a powerful tool to understand complex crustal structures of ancient orogens in order to design future prospecting surveys for mineral deposits of economic interest.
28 CFR 0.76 - Specific functions.
Code of Federal Regulations, 2014 CFR
2014-07-01
.... 3122). (j) Excluding the Office of Justice Assistance, Research and Statistics, supervising and... pertaining to the employment, separation, and general administration of personnel in General Schedule grade... General Schedule and wage board systems regardless of grade; postaudit and correct any personnel action...
28 CFR 0.76 - Specific functions.
Code of Federal Regulations, 2012 CFR
2012-07-01
.... 3122). (j) Excluding the Office of Justice Assistance, Research and Statistics, supervising and... pertaining to the employment, separation, and general administration of personnel in General Schedule grade... General Schedule and wage board systems regardless of grade; postaudit and correct any personnel action...
28 CFR 0.76 - Specific functions.
Code of Federal Regulations, 2011 CFR
2011-07-01
.... 3122). (j) Excluding the Office of Justice Assistance, Research and Statistics, supervising and... pertaining to the employment, separation, and general administration of personnel in General Schedule grade... General Schedule and wage board systems regardless of grade; postaudit and correct any personnel action...
28 CFR 0.76 - Specific functions.
Code of Federal Regulations, 2013 CFR
2013-07-01
.... 3122). (j) Excluding the Office of Justice Assistance, Research and Statistics, supervising and... pertaining to the employment, separation, and general administration of personnel in General Schedule grade... General Schedule and wage board systems regardless of grade; postaudit and correct any personnel action...
Poduska, Jeanne; Kellam, Sheppard; Brown, C Hendricks; Ford, Carla; Windham, Amy; Keegan, Natalie; Wang, Wei
2009-09-02
While a number of preventive interventions delivered within schools have shown both short-term and long-term impact in epidemiologically based randomized field trials, programs are not often sustained with high-quality implementation over time. This study was designed to support two purposes. The first purpose was to test the effectiveness of a universal classroom-based intervention, the Whole Day First Grade Program (WD), aimed at two early antecedents to drug abuse and other problem behaviors, namely, aggressive, disruptive behavior and poor academic achievement. The second purpose--the focus of this paper--was to examine the utility of a multilevel structure to support high levels of implementation during the effectiveness trial, to sustain WD practices across additional years, and to train additional teachers in WD practices. The WD intervention integrated three components, each previously tested separately: classroom behavior management; instruction, specifically reading; and family-classroom partnerships around behavior and learning. Teachers and students in 12 schools were randomly assigned to receive either the WD intervention or the standard first-grade program of the school system (SC). Three consecutive cohorts of first graders were randomized within schools to WD or SC classrooms and followed through the end of third grade to test the effectiveness of the WD intervention. Teacher practices were assessed over three years to examine the utility of the multilevel structure to support sustainability and scaling-up. The design employed in this trial appears to have considerable utility to provide data on WD effectiveness and to inform the field with regard to structures required to move evidence-based programs into practice. NCT00257088.
Recovery of ferrous and nonferrous metal from ASR by physical separation
NASA Astrophysics Data System (ADS)
Kim, Min-gyu; Han, Oh-hyung; Park, Chul-hyun
2017-04-01
A recycle ratio of waste automobiles in Korea is low, compared to that of the advanced countries. Especially in its recycle, separation of automotive shredder residue (ASR), the residual fraction of approximate 25% obtained after dismantling and shredding from waste car, is needed. However ASR is cannot be effectively separated due to its heterogeneous materials and coated or laminated complexes and then is largely deposited in land-fill sites as waste. In this study ASR was separated by a series of physical processing operations such as comminution, air classification and magnetic separation and electrostatic separations. In particular it focuses on estimating the optimal conditions of magnetic and electrostatic separations for improving the separation efficiency of valuable ferrous and non-ferrous metals such as iron (Fe), aluminum, copper and etc. In magnetic separation, 91.5% Fe grade and 91% recovery could be obtained at conditions of particle size under 10mm and magnetic intensity of 400 gauss. In corona electrostatic separation for recovering nonferrous metals, a grade of 79.2% and recovery of 90.7% could be successfully achieved under conditions of -6mm particle size, 50kV electrode potential, 35rpm drum speed and 20 degree splitter position, respectively. Acknowledgments This study was supported by the R&D Center for Valuable Recycling (Global-Top R&BD Program) of the Ministry of Environment. (Project No. 2016002250001)
Teacher Teams and Computer Technology.
ERIC Educational Resources Information Center
Hecht, Jeffrey B.; Roberts, Nicole K.; Schoon, Perry L.; Fansler, Gigi
This research used three groups in a quasi-experimental approach to assess the combined impact of teacher teaming and computer technology on student grade point averages (GPAs). Ninth-grade students' academic achievement in each of four different subject areas (algebra, biology, world cultures, and English) was studied. Two separate treatments…
Tabor, R.W.; Frizzell, V.A.; Booth, D.B.; Waitt, R.B.; Whetten, J.T.; Zartman, R.E.
2006-01-01
This digital map database has been prepared from the published geologic map of the Skykomish River 30- by 60-minute quadrangle by the senior author. Together with the accompanying text files as PDF, it provides information on the geologic structure and stratigraphy of the area covered. The database delineates map units that are identified by general age and lithology following the stratigraphic nomenclature of the U.S. Geological Survey. The authors mapped most of the bedrock geology at 1:100,000 scale, but compiled Quaternary units at 1:24,000 scale. The Quaternary contacts and structural data have been much simplified for the 1:100,000-scale map and database. The spatial resolution (scale) of the database is 1:100,000 or smaller. From the eastern-most edges of suburban Seattle, the Skykomish River quadrangle stretches east across the low rolling hills and broad river valleys of the Puget Lowland, across the forested foothills of the North Cascades, and across high meadowlands to the bare rock peaks of the Cascade crest. The Straight Creek Fault, a major Pacific Northwest structure which almost bisects the quadrangle, mostly separates unmetamorphosed and low-grade metamorphic Paleozoic and Mesozoic oceanic rocks on the west from medium- to high-grade metamorphic rocks on the east. Within the quadrangle the lower grade rocks are mostly Mesozoic melange units. To the east, the higher-grade terrane is mostly the Chiwaukum Schist and related gneisses of the Nason terrane and invading mid-Cretaceous stitching plutons. The Early Cretaceous Easton Metamorphic Suite crops out on both sides of the Straight Creek fault and records it's dextral displacement. On the south margin of the quadrangle, the fault separates the lower Eocene Swauk Formation on the east from the upper Eocene and Oligocene(?) Naches Formation and, farther north, its correlative Barlow Pass Volcanics the west. Stratigraphically equivalent rocks of the Puget Group crop out farther to the west. Rocks of the Cascade magmatic arc are mostly represented by Miocene and Oligocene plutons, including the Grotto, Snoqualmie, and Index batholiths. Alpine river valleys in the quadrangle record multiple advances and retreats of alpine glaciers. Multiple advances of the Cordilleran ice sheet, originating in the mountains of British Columbia, Canada, have left an even more complex sequence of outwash and till along the western mountain front, up these same alpine river valleys, and over the Puget Lowland. This database and accompanying plot files depict the distribution of geologic materials and structures at a regional (1:100,000) scale. The report is intended to provide geologic information for the regional study of materials properties, earthquake shaking, landslide potential, mineral hazards, seismic velocity, and earthquake faults. In addition, the report contains new information and interpretations about the regional geologic history and framework. However, the regional scale of this report does not provide sufficient detail for site development purposes.
ERIC Educational Resources Information Center
Masche, J. Gowert; Barber, Brian K.
On the basis of individuation approaches to the study of parent-adolescent relationships, this study hypothesized that connectedness and separation will be separately and jointly related to indicators of successful identity development. A sample of 968 students attending 7th and 10th grades was drawn to represent different German school tracks.…
NASA Astrophysics Data System (ADS)
Lestariningsih, Titik; Ratri, Christin Rina; Wigayati, Etty Marty; Sabrina, Qolby
2016-02-01
Characterization of pore structure and crystal structure of the LiB(C2O4)2H2O or LIBOB compound has been performed in this study. These recent years, research regarding LiBOB electrolyte salt have been performed using analytical-grade raw materials, therefore this research was aimed to synthesized LiBOB electrolyte salt using the cheaper and abundant technical-grade raw materials. Lithium hydroxide (LiOH), oxalic acid dihydrate (H2C2O4.2H2O), and boric acid (H3BO3) both in technical-grade and analytical-grade quality were used as raw materials for the synthesis of LiBOB. Crystal structure characterization results of synthesized LiBOB from both technical-grade and analytical-grade raw materials have shown the existence of LiBOB and LiBOB hydrate phase with orthorombic structure. These results were also confirmed by FT-IR analysis, which showed the functional groups of LiBOB compounds. SEM analysis results showed that synthesized LiBOB has spherical structure, while commercial LiBOB has cylindrical structure. Synthesized LiBOB has a similar pore size of commercial LiBOB, i.e. 19 nm (mesoporous material). Surface area of synthesized LiBOB from analytical-grade raw materials and technical-grade materials as well as commercial LIBOB were 88.556 m2/g, 41.524 m2/g, and 108.776 m2/g, respectively. EIS analysis results showed that synthesized LiBOB from technical-grade raw materials has lower conductivity than synthesized LiBOB from analytical-grade raw materials.
Oyebola, D D; Adewoye, O E; Iyaniwura, J O; Alada, A R; Fasanmade, A A; Raji, Y
2000-01-01
This study was designed to compare the performance of medical students in physiology when assessed by multiple choice questions (MCQs) and short essay questions (SEQs). The study also examined the influence of factors such as age, sex, O/level grades and JAMB scores on performance in the MCQs and SEQs. A structured questionnaire was administered to 264 medical students' four months before the Part I MBBS examination. Apart from personal data of each student, the questionnaire sought information on the JAMB scores and GCE O' Level grades of each student in English Language, Biology, Chemistry, Physics and Mathematics. The physiology syllabus was divided into five parts and the students were administered separate examinations (tests) on each part. Each test consisted of MCQs and SEQs. The performance in MCQs and SEQs were compared. Also, the effects of JAMB scores and GCE O/level grades on the performance in both the MCQs and SEQs were assessed. The results showed that the students performed better in all MCQ tests than in the SEQs. JAMB scores and O' level English Language grade had no significant effect on students' performance in MCQs and SEQs. However O' level grades in Biology, Chemistry, Physics and Mathematics had significant effects on performance in MCQs and SEQs. Inadequate knowledge of physiology and inability to present information in a logical sequence are believed to be major factors contributing to the poorer performance in the SEQs compared with MCQs. In view of the finding of significant association between performance in MCQs and SEQs and GCE O/level grades in science subjects and mathematics, it was recommended that both JAMB results and the GCE results in the four O/level subjects above may be considered when selecting candidates for admission into the medical schools.
Economic Education Projects: Abstracts from the 1980-81 Competition.
ERIC Educational Resources Information Center
Palmer, George E., Ed.
Abstracts of innovative and imaginative economics units are provided in this annotated listing of economic education projects submitted to the 1980-81 National Awards Program for Teaching Economics. Over 200 abstracts are contained in separate sections covering materials for primary grades, intermediate grades, junior high schools, senior high…
7 CFR 52.804 - Ascertaining the grade of a sample unit.
Code of Federal Regulations, 2011 CFR
2011-01-01
... pitted cherries is determined immediately after thawing to the extent that the cherries may be separated... 7 Agriculture 2 2011-01-01 2011-01-01 false Ascertaining the grade of a sample unit. 52.804 Section 52.804 Agriculture Regulations of the Department of Agriculture AGRICULTURAL MARKETING SERVICE...
Learn about Seabirds. Teaching Packet, Grades 4-6.
ERIC Educational Resources Information Center
Fish and Wildlife Service (Dept. of Interior), Anchorage, AK.
This teaching packet is designed to teach Alaskan students in grades 4-6 about Alaska's seabird populations, the worldwide significance of seabirds, and the environmental conditions to which seabirds are sensitive. The packet includes a curriculum guide (containing a teacher's background story and 12 teaching activities), a separately published…
Code of Federal Regulations, 2011 CFR
2011-01-01
... career or career-conditional competitive service employee, in tenure group 1 or 2, at grades GS-15 level... employee means: (1) A current career or career-conditional competitive service employee, in tenure group 1 or 2, at grade levels GS-15 or equivalent and below, who has received a specific RIF separation...
Separation of Zirconium and Hafnium: A Review
NASA Astrophysics Data System (ADS)
Xu, L.; Xiao, Y.; van Sandwijk, A.; Xu, Q.; Yang, Y.
Zirconium is an ideal material for nuclear reactors due to its low absorption cross-section for thermal neutrons, whereas the typically contained hafnium with strong neutron-absorption is very harmful for zirconium. This paper provides an overview of the processes for separating hafnium from zirconium. The separation processes are roughly classified into hydro- and pyrometallurgical routes. The current dominant zirconium production route involves pyrometallurgical ore cracking, multi-step hydrometallurgical liquid-liquid extraction for hafnium removal and the reduction of zirconium tetrachloride to the pure metal by the Kroll process. The lengthy hydrometallurgical Zr-Hf separation operations leads to high production cost, intensive labour and heavy environmental burden. Using a compact pyrometallurgical separation method can simplify the whole production flowsheet with a higher process efficiency. The known separation methods are discussed based on the following reaction features: redox characteristics, volatility, electrochemical properties and molten salt extraction. The commercially operating extractive distillation process is a significant advance in Zr-Hf separation technology but it suffers from high process maintenance cost. The recently developed new process based on molten salt-metal equilibrium for Zr-Hf separation shows a great potential for industrial application, which is compact for nuclear grade zirconium production starting from crude ore. In the present paper, the available separation technologies are compared. The advantages and disadvantages as well as future directions of research and development for nuclear grade zirconium production are discussed.
Early social behaviors and the trajectory of peer victimization across the school years.
Sugimura, Niwako; Berry, Daniel; Troop-Gordon, Wendy; Rudolph, Karen D
2017-08-01
Research has established that long-term exposure to peer victimization is associated with higher levels of emotional and behavioral maladjustment. Yet, relatively little is known regarding predictors of stable versus declining victimization across extended periods of time. To fill this knowledge gap, the present study used latent growth curve modeling to examine the separate and unique contributions of 3 early social behaviors in 2nd grade (aggression, anxious solitude, and prosocial behavior) to victimization across 2nd to 8th grade. Five hundred and 76 youth (M = 7.96 years, SD = .34) reported their level of exposure to victimization once a year from 2nd to 8th grade, and their teachers rated each youth on the 3 social behaviors in 2nd grade. When examined separately, the analyses revealed that (a) all 3 social behaviors contributed to 2nd-grade victimization; (b) anxious solitude and prosocial behavior contributed to the trajectory of victimization differently for boys and girls; and (c) aggression and anxious solitude contributed to significantly different levels of 8th-grade victimization in girls. Of interest, some effects were stronger in boys during elementary school and others were stronger in girls after the transition to middle school. When examined simultaneously, aggression remained the only significant predictor of 2nd-grade victimization; both anxious solitude and prosocial behavior uniquely predicted the trajectory of victimization, and aggression and anxious solitude uniquely predicted 8th-grade victimization in girls. Results are discussed with regard to prevention of prolonged victimization, with attention to gender differences. (PsycINFO Database Record (c) 2017 APA, all rights reserved).
Kinetics of process of product separation in closed system with recirculation
NASA Astrophysics Data System (ADS)
Prokopenko, V. S.; Orekhova, T. N.; Goncharov, E. I.; Odobesko, I. A.
2018-03-01
The object of an article is the extrapolation of the process of classifying material while passing in a model with the separation of the products of milling in the cleaning system includes a separator, concentrator, cyclone and a recycle loop. The model allows for the given parameters to predict the coarseness of grading of the finished product.
ERIC Educational Resources Information Center
Foorman, Barbara R.; Herrera, Sarah; Petscher, Yaacov; Mitchell, Alison; Truckenmiller, Adrea
2015-01-01
This study examined the structure of oral language and reading and their relation to comprehension from a latent variable modeling perspective in Kindergarten, Grade 1, and Grade 2. Participants were students in Kindergarten (n = 218), Grade 1 (n = 372), and Grade 2 (n = 273), attending Title 1 schools. Students were administered phonological…
A multicore optical fiber for distributed sensing
NASA Astrophysics Data System (ADS)
Sun, Xiaoguang; Li, Jie; Burgess, David T.; Hines, Mike; Zhu, Beyuan
2014-06-01
With advancements in optical fiber technology, the incorporation of multiple sensing functionalities within a single fiber structure opens the possibility to deploy dielectric, fully distributed, long-length optical sensors in an extremely small cross section. To illustrate the concept, we designed and manufactured a multicore optical fiber with three graded-index (GI) multimode (MM) cores and one single mode (SM) core. The fiber was coated with both a silicone primary layer and an ETFE buffer for high temperature applications. The fiber properties such as geometry, crosstalk and attenuation are described. A method for coupling the signal from the individual cores into separate optical fibers is also presented.
Code of Federal Regulations, 2011 CFR
2011-01-01
... to IAEA Safeguards) means the collection of environmental samples (e.g., air, water, vegetation, soil... uranium or enriching uranium in the isotope 235, zirconium tubes, heavy water or deuterium, nuclear-grade...); (3) A fuel fabrication plant; (4) An enrichment plant or isotope separation plant for the separation...
DOE Office of Scientific and Technical Information (OSTI.GOV)
Roberts, Barry L; Lord, David; Lord, Anna C. Snider
This report summarizes the work performed in the prioritization of cavern access wells for remediation and monitoring at the West Hackberry Strategic Petroleum Reserve site. The grading included consideration of all 31 wells at the West Hackberry site, with each well receiving a separate grade for remediation and monitoring. Numerous factors affecting well integrity were incorporated into the grading including casing survey results, cavern pressure history, results from geomechanical simulations, and site geologic factors. The factors and grading framework used here are the same as those used in developing similar well remediation and monitoring priorities at the Big Hill andmore » Bryan Mound Strategic Petroleum Reserve Sites.« less
DOE Office of Scientific and Technical Information (OSTI.GOV)
Roberts, Barry L; Lord, David; Lord, Anna C. Snider
This report summarizes the work performed in the prioritization of cavern access wells for remediation and monitoring at the Bryan Mound Strategic Petroleum Reserve site. The grading included consideration of all 47 wells at the Bryan Mound site, with each well receiving a separate grade for remediation and monitoring. Numerous factors affecting well integrity were incorporated into the grading including casing survey results, cavern pressure history, results from geomechanical simulations, and site geologic factors. The factors and grading framework used here are the same as those used in developing similar well remediation and monitoring priorities at the Big Hill Strategicmore » Petroleum Reserve Site.« less
The Impact of Study Skills and Organizational Methods on Student Achievement
ERIC Educational Resources Information Center
Gambill, Jill M.; Moss, Lauralee A.; Vescogni, Christie D.
2008-01-01
Teachers at three separate public schools analyzed possible reasons behind low grades. All problems (late work, unprepared students, lax attitudes) related to students who were not organized for learning. Even though these teachers taught a variety of ages ranging from third thru twelve grades, they typically found evidence of a lack of…
49 CFR 222.35 - What are the minimum requirements for quiet zones?
Code of Federal Regulations, 2011 CFR
2011-10-01
... within a single political jurisdiction shall be separated by at least one public highway-rail grade... include grade crossings on a segment of rail line crossing more than one political jurisdiction. (b... be credited in calculating the Quiet Zone Risk Index. (c) Advance warning signs. (1) Each highway...
49 CFR 222.35 - What are the minimum requirements for quiet zones?
Code of Federal Regulations, 2010 CFR
2010-10-01
... within a single political jurisdiction shall be separated by at least one public highway-rail grade... include grade crossings on a segment of rail line crossing more than one political jurisdiction. (b... be credited in calculating the Quiet Zone Risk Index. (c) Advance warning signs. (1) Each highway...
An Intervention Study on Mental Computation for Second Graders in Taiwan
ERIC Educational Resources Information Center
Yang, Der-Ching; Huang, Ke-Lun
2014-01-01
The authors compared the mental computation performance and mental strategies used by an experimental Grade 2 class and a control Grade 2 class before and after instructional intervention. Results indicate that students in the experimental group had better performance on mental computation. The use of mental strategies (counting, separation,…
Science: Kindergarten. Interim Guide.
ERIC Educational Resources Information Center
Manitoba Dept. of Education and Training, Winnipeg.
This guide is one of a set of 10 science guides, each covering a separate grade in Manitoba, together covering kindergarten through grade 9. The guides have been designed to provide a framework for building scientific concepts and developing the learning of process skills. They replace an earlier set of guides dated 1979. Each guide is essentially…
West, S E; Harris, K B; Haneklaus, A N; Savell, J W; Thompson, L D; Brooks, J C; Pool, J K; Luna, A M; Engle, T E; Schutz, J S; Woerner, D R; Arcibeque, S L; Belk, K E; Douglass, L; Leheska, J M; McNeill, S; Howe, J C; Holden, J M; Duvall, M; Patterson, K
2014-08-01
This study was designed to provide updated information on the separable components, cooking yields, and proximate composition of retail cuts from the beef chuck. Additionally, the impact the United States Department of Agriculture (USDA) Quality and Yield Grade may have on such factors was investigated. Ultimately, these data will be used in the USDA - Nutrient Data Laboratory's (NDL) National Nutrient Database for Standard Reference (SR). To represent the current United States beef supply, seventy-two carcasses were selected from six regions of the country based on USDA Yield Grade, USDA Quality Grade, gender, and genetic type. Whole beef chuck primals from selected carcasses were shipped to three university laboratories for subsequent retail cut fabrication, raw and cooked cut dissection, and proximate analyses. The incorporation of these data into the SR will improve dietary education, product labeling, and other applications both domestically and abroad, thus emphasizing the importance of accurate and relevant beef nutrient data. Copyright © 2014. Published by Elsevier Ltd.
DOE Office of Scientific and Technical Information (OSTI.GOV)
Sharma, Sanjeev, E-mail: sanjeevsharma145@gmail.com; Kumar, Rajendra, E-mail: khundrakpam-ss@yahoo.com; Singh, Kh. S., E-mail: khundrakpam-ss@yahoo.com
A simple design of broadband one dimensional dielectric/semiconductor multilayer structure having refractive index profile of exponentially graded material has been proposed. The theoretical analysis shows that the proposed structure works as a perfect mirror within a certain wavelength range (1550 nm). In order to calculate the reflection properties a transfer matrix method (TMM) has been used. This property shows that binary graded photonic crystal structures have widened omnidirectional reflector (ODR) bandgap. Hence a exponentially graded photonic crystal structure can be used as a broadband optical reflector and the range of reflection can be tuned to any wavelength region by varying themore » refractive index profile of exponentially graded photonic crystal structure.« less
Effect of walking speed on lower extremity joint loading in graded ramp walking.
Schwameder, Hermann; Lindenhofer, Elke; Müller, Erich
2005-07-01
Lower extremity joint loading during walking is strongly affected by the steepness of the slope and might cause pain and injuries in lower extremity joint structures. One feasible measure to reduce joint loading is the reduction of walking speed. Positive effects have been shown for level walking, but not for graded walking or hiking conditions. The aim of the study was to quantify the effect of walking speed (separated into the two components, step length and cadence) on the joint power of the hip, knee and ankle and to determine the knee joint forces in uphill and downhill walking. Ten participants walked up and down a ramp with step lengths of 0.46, 0.575 and 0.69 m and cadences of 80, 100 and 120 steps per minute. The ramp was equipped with a force platform and the locomotion was filmed with a 60 Hz video camera. Loading of the lower extremity joints was determined using inverse dynamics. A two-dimensional knee model was used to calculate forces in the knee structures during the stance phase. Walking speed affected lower extremity joint loading substantially and significantly. Change of step length caused much greater loading changes for all joints compared with change of cadence; the effects were more distinct in downhill than in uphill walking. The results indicate that lower extremity joint loading can be effectively controlled by varying step length and cadence during graded uphill and downhill walking. Hikers can avoid or reduce pain and injuries by reducing walking speed, particularly in downhill walking.
Resistive foil edge grading for accelerator and other high voltage structures
Caporaso, George J.; Sampayan, Stephen F.; Sanders, David M.
2014-06-10
In a structure or device having a pair of electrical conductors separated by an insulator across which a voltage is placed, resistive layers are formed around the conductors to force the electric potential within the insulator to distribute more uniformly so as to decrease or eliminate electric field enhancement at the conductor edges. This is done by utilizing the properties of resistive layers to allow the voltage on the electrode to diffuse outwards, reducing the field stress at the conductor edge. Preferably, the resistive layer has a tapered resistivity, with a lower resistivity adjacent to the conductor and a higher resistivity away from the conductor. Generally, a resistive path across the insulator is provided, preferably by providing a resistive region in the bulk of the insulator, with the resistive layer extending over the resistive region.
Recovery of metals from waste printed circuit boards by a mechanical method using a water medium.
Duan, Chenlong; Wen, Xuefeng; Shi, Changsheng; Zhao, Yuemin; Wen, Baofeng; He, Yaqun
2009-07-15
Research on the recycling of waste printed circuit boards (PCB) is at the forefront of environmental pollution prevention and resource recycling. To effectively crush waste PCB and to solve the problem of secondary pollution from fugitive odors and dust created during the crushing process, a wet impacting crusher was employed to achieve comminution liberation of the PCB in a water medium. The function of water in the crushing process was analyzed. When using slippery hammerheads, a rotation speed of 1470 rpm, a water flow of 6m(3)/h and a sieve plate aperture of 2.2mm, 95.87% of the crushed product was sized less than 1mm. 94.30% of the metal was in this grade of product. Using smashed material graded -1mm for further research, a Falcon concentrator was used to recover the metal from the waste PCB. Engineering considerations were the liberation degree, the distribution ratio of the metal and a way to simplify the technology. The separation mechanism for fine particles of different densities in a Falcon concentrator was analyzed in detail and the separation process in the segregation and separation zones was deduced. Also, the magnitude of centrifugal acceleration, the back flow water pressure and the feed slurry concentration, any of which might affect separation results, were studied. A recovery model was established using Design-Expert software. Separating waste PCB, crushed to -1mm, with the Falcon separator gave a concentrated product graded 92.36% metal with a recovery of 97.05%. To do this the reverse water pressure was 0.05 MPa, the speed transducer frequency was set at 30 Hz and the feed density was 20 g/l. A flow diagram illustrating the new technique of wet impact crushing followed by separation with a Falcon concentrator is provided. The technique will prevent environmental pollution from waste PCB and allow the effective recovery of resources. Water was used as the medium throughout the whole process.
An Approach to Evaluate Blurriness in Retinal Images with Vitreous Opacity for Cataract Diagnosis
Xu, Liang
2017-01-01
Cataract is one of the leading causes of blindness in the world's population. A method to evaluate blurriness for cataract diagnosis in retinal images with vitreous opacity is proposed in this paper. Three types of features are extracted, which include pixel number of visible structures, mean contrast between vessels and background, and local standard deviation. To avoid the wrong detection of vitreous opacity as retinal structures, a morphological method is proposed to detect and remove such lesions from retinal visible structure segmentation. Based on the extracted features, a decision tree is trained to classify retinal images into five grades of blurriness. The proposed approach was tested using 1355 clinical retinal images, and the accuracies of two-class classification and five-grade grading compared with that of manual grading are 92.8% and 81.1%, respectively. The kappa value between automatic grading and manual grading is 0.74 in five-grade grading, in which both variance and P value are less than 0.001. Experimental results show that the grading difference between automatic grading and manual grading is all within 1 grade, which is much improvement compared with that of other available methods. The proposed grading method provides a universal measure of cataract severity and can facilitate the decision of cataract surgery. PMID:29065620
Report of Results Tutorial Reading Project, Indianapolis Public Schools, 1968-1969.
ERIC Educational Resources Information Center
Ellson, D. G.
The results of testing some 1,265 first-grade students who took part in the Tutorial Reading Project for the full 1968-69 school year in Indianapolis are reported. Subjects were selected from the lower third of the first grade, based on Metropolitan Reading Readiness Test scores and teachers' judgments. Separate pretesting and post-testing was…
The Effect of Flexible Small Groups on Math Achievement in First Grade
ERIC Educational Resources Information Center
Benders, David; Craft, Tracy
2016-01-01
This action research study explores the Guided Math Approach to improving math scores for first grade students. Previous MAP (Measure of Academic Progress) scores were used to measure proficiency and students were placed in separate categories for appropriate instruction. This study reviewed math achievement scores on MAP test from a First grade…
Criterion Referenced Inventory. Grade 7 Skill Clusters, Objectives, and Illustrations.
ERIC Educational Resources Information Center
Montgomery County Public Schools, Rockville, MD.
Part of a series of competency-based test materials for grades six through ten, this test booklet for seventh graders contains multiple-choice questions designed to aid in the evaluation of the pupils' library skills. Accompanied by a separate booklet of illustrations which are to be used in conjunction with the questions, the test covers the…
The Development and Validation of a Pictorial Self-Concept Scale for Children in K-4.
ERIC Educational Resources Information Center
Bolea, Angelo S.; And Others
The study discusses the development of a self-concept measure for children in kindergarten and the lower elementary grades. A scale (Pictorial Self-Concept Scale), was constructed from children's statements about themselves. This scale was administered to kindergarten through fourth grade subjects. Each child separated 50 cartoon picture cards…
Predicting Grades from an English Language Assessment: The Importance of Peeling the Onion
ERIC Educational Resources Information Center
Bridgeman, Brent; Cho, Yeonsuk; DiPietro, Stephen
2016-01-01
Data from 787 international undergraduate students at an urban university in the United States were used to demonstrate the importance of separating a sample into meaningful subgroups in order to demonstrate the ability of an English language assessment to predict the first-year grade point average (GPA). For example, when all students were pooled…
Establishing a Causal Model for Bloom's Taxonomy through Path Analysis.
ERIC Educational Resources Information Center
O'Hara, Takeshi; And Others
Path analysis was used to reanalyze Kropp and Stoker's data from tests designed to evaluate Bloom's taxonomy of educational objectives in the cognitive domain. Scores for 1,128 students in grades nine through twelve were analyzed separately by grade level for four content areas on six taxonomic levels. A measure of general ability was also…
Using Separate Answer Sheets with Grade 3 Students
ERIC Educational Resources Information Center
Brooks, Thomas; O'Malley, Kimberly; Ragland, Shelley; Young, Michael; Kirkpatrick, Rob
2014-01-01
The authors compared the performance of third-grade students testing on answer sheets with those testing on machine-scored test booklets. The 1,832 students in the nationally representative sample were assigned at the campus level to complete the Stanford Achievement Test Series, Tenth Edition in 1 of 4 conditions: (a) Form A answer sheet, (b)…
Arizona's Instrument to Measure Standards (AIMS DPA). Student Guide. Grade 7
ERIC Educational Resources Information Center
Arizona Department of Education, 2006
2006-01-01
Arizona's Instrument to Measure Standards Dual Purpose Assessment (AIMS DPA) is a combination of two separate tests. One test is AIMS, which measures how well the student knows the reading, writing, and mathematics content that all Arizona students in the student's grade level are expected to know and be able to do. AIMS DPA includes…
Arizona's Instrument to Measure Standards (AIMS DPA). Student Guide. Grade 3
ERIC Educational Resources Information Center
Arizona Department of Education, 2006
2006-01-01
Arizona's Instrument to Measure Standards Dual Purpose Assessment (AIMS DPA) is a combination of two separate tests. One test is AIMS, which measures how well the student knows the reading, writing , and mathematics content that all Arizona students at the third grade level are expected to know and be able to do. AIMS includes multiple-choice…
ERIC Educational Resources Information Center
Allhusen, Virginia; Belsky, Jay; Booth-LaForce, Cathryn L.; Bradley, Robert; Brownwell, Celia A; Burchinal, Margaret; Campbell, Susan B.; Clarke-Stewart, K. Alison; Cox, Martha; Friedman, Sarah L.; Hirsh-Pasek, Kathryn; Houts, Renate M.; Huston, Aletha; Jaeger, Elizabeth; Johnson, Deborah J.; Kelly, Jean F.; Knoke, Bonnie; Marshall, Nancy; McCartney, Kathleen; Morrison, Frederick J.; O'Brien, Marion; Tresch Owen, Margaret; Payne, Chris; Phillips, Deborah; Pianta, Robert; Randolph, Suzanne M.; Robeson, Wendy W.; Spieker, Susan; Lowe Vandell, Deborah; Weinraub, Marsha
2004-01-01
This study evaluated the extent to which first-grade class size predicted child outcomes and observed classroom processes for 651 children (in separate classrooms). Analyses examined observed child-adult ratios and teacher-reported class sizes. Smaller classrooms showed higher quality instructional and emotional support, although children were…
USDA-ARS?s Scientific Manuscript database
The overall objective of this research was to develop an in-field presorting and grading system to separate undersized and defective fruit from fresh market-grade apples. To achieve this goal, a cost-effective machine vision inspection prototype was built, which consisted of a low-cost color camera,...
Comparative studies of industrial grade carbon black powders
DOE Office of Scientific and Technical Information (OSTI.GOV)
Chawla, Komal, E-mail: komalchawla.rs@gmail.com; Chauhan, Alok P. S., E-mail: chauhan.alok@gmail.com, E-mail: alok.chauhan@alumni.stonybrook.edu
Comparative studies of two dissimilar industrial grade Carbon Black (CB) powders (N375 and N405) were conducted. The structure, surface area and particle size are the three important characteristics of CB powder that determine their processability and application as filler in preparing rubber compounds. The powders were characterized for their structure using dibutyl phthalate absorption (DBPA), particle size via laser particle size analyzer and surface area by nitrogen adsorption method. The structural characterization showed that N405 had lower DBPA in comparison to N375, confirming low structure of N405 grade CB powder. It was observed from the particle size analysis that N375more » was coarser than N405 grade CB. The total surface area values were determined by the BET method based on the cross sectional area of the nitrogen molecule. N375, a coarse grade CB powder with high structure, depicted less surface area as compared to N405.« less
Focused terahertz waves generated by a phase velocity gradient in a parallel-plate waveguide.
McKinney, Robert W; Monnai, Yasuaki; Mendis, Rajind; Mittleman, Daniel
2015-10-19
We demonstrate the focusing of a free-space THz beam emerging from a leaky parallel-plate waveguide (PPWG). Focusing is accomplished by grading the launch angle of the leaky wave using a PPWG with gradient plate separation. Inside the PPWG, the phase velocity of the guided TE1 mode exceeds the vacuum light speed, allowing the wave to leak into free space from a slit cut along the top plate. Since the leaky wave angle changes as the plate separation decreases, the beam divergence can be controlled by grading the plate separation along the propagation axis. We experimentally demonstrate focusing of the leaky wave at a selected location at frequencies of 100 GHz and 170 GHz, and compare our measurements with numerical simulations. The proposed concept can be valuable for implementing a flat and wide-aperture beam-former for THz communications systems.
Grading options for western hemlock "pulpwood" logs from southeastern Alaska.
David W. Green; Kent A. McDonald; John Dramm; Kenneth Kilborn
Properties and grade yield are estimated for structural lumber produced from No. 3, No. 4, and low-end No. 2 grade western hemlock logs of the type previously used primarily for the production of pulp chips. Estimates are given for production in the Structural Framing, Machine Stress Rating, and Laminating Stock grading systems. The information shows that significant...
Structural lumber from suppressed-growth ponderosa pine from northern Arizona.
Thomas M. Gorman; David W. Green; Aldo G. Cisternas; Roland Hernandez; Eini C. Lowell
2007-01-01
Lumber was sawn from 150 suppressed-growth ponderosa pine trees, 6 to 16 inches in diameter, harvested near Flagstaff, Arizona. This paper presents grade recover and properties for dry 2 by 4s sawn from the logs and graded by a variety of structural grading systems. Flexural properties met or exceeded those listed in the National Design Specification. When graded as...
DOE Office of Scientific and Technical Information (OSTI.GOV)
Roberts, Barry L; Lord, David; Lord, Anna C. Snider
This report summarizes the work performed in the prioritization of cavern access wells for remediation and monitoring at the Bayou Choctaw Strategic Petroleum Reserve site. The grading included consideration of all 15 wells at the Bayou Choctaw site, with each active well receiving a separate grade for remediation and monitoring. Numerous factors affecting well integrity were incorporated into the grading including casing survey results, cavern pressure history, results from geomechanical simulations, and site geologic factors. The factors and grading framework used here are the same as those used in developing similar well remediation and monitoring priorities at the Big Hill,more » Bryan Mound, and West Hackberry Strategic Petroleum Reserve Sites.« less
Semi-industrial experimental study on bauxite separation using a cell-column integration process
NASA Astrophysics Data System (ADS)
Zhang, Ning-ning; Zhou, Chang-chun; Cong, Long-fei; Cao, Wen-long; Zhou, You
2016-01-01
The cyclonic-static micro-bubble flotation column (FCSMC) is a highly efficient mineral processing equipment. In this study, a cell-column (FCSMC) integration process was investigated for the separation of bauxite and its feasibility was analyzed on a theoretical basis. The properties of low-grade bauxite ore from Henan Province, China were analyzed. Parameters such as reagent dosage, scraping bubble time, and pressure of the circulating pump during the sorting process were investigated and optimized to improve the flotation efficiency. On the basis of these parameters, continuous separation experiments were conducted. Bauxite concentrate with an aluminum-to-silicon (A/S) mass ratio of 6.37 and a 77.63wt% recovery rate were achieved via a flow sheet consisting of "fast flotation using a flotation cell, one roughing flotation and one cleaning flotation using flotation columns". Compared with the full-flotation-cells process, the cell-column integration process resulted in an increase of the A/S ratio by 0.41 and the recovery rate by 17.58wt%. Cell-column integration separation technology represents a new approach for the separation of middle-to-low-grade bauxite ore.
Separate but correlated: The latent structure of space and mathematics across development.
Mix, Kelly S; Levine, Susan C; Cheng, Yi-Ling; Young, Chris; Hambrick, D Zachary; Ping, Raedy; Konstantopoulos, Spyros
2016-09-01
The relations among various spatial and mathematics skills were assessed in a cross-sectional study of 854 children from kindergarten, third, and sixth grades (i.e., 5 to 13 years of age). Children completed a battery of spatial mathematics tests and their scores were submitted to exploratory factor analyses both within and across domains. In the within domain analyses, all of the measures formed single factors at each age, suggesting consistent, unitary structures across this age range. Yet, as in previous work, the 2 domains were highly correlated, both in terms of overall composite score and pairwise comparisons of individual tasks. When both spatial and mathematics scores were submitted to the same factor analysis, the 2 domain specific factors again emerged, but there also were significant cross-domain factor loadings that varied with age. Multivariate regressions replicated the factor analysis and further revealed that mental rotation was the best predictor of mathematical performance in kindergarten, and visual-spatial working memory was the best predictor of mathematical performance in sixth grade. The mathematical tasks that predicted the most variance in spatial skill were place value (K, 3rd, 6th), word problems (3rd, 6th), calculation (K), fraction concepts (3rd), and algebra (6th). Thus, although spatial skill and mathematics each have strong internal structures, they also share significant overlap, and have particularly strong cross-domain relations for certain tasks. (PsycINFO Database Record (c) 2016 APA, all rights reserved).
DOE Office of Scientific and Technical Information (OSTI.GOV)
Hoang Duc, Albert K., E-mail: albert.hoangduc.ucl@gmail.com; McClelland, Jamie; Modat, Marc
Purpose: The aim of this study was to assess whether clinically acceptable segmentations of organs at risk (OARs) in head and neck cancer can be obtained automatically and efficiently using the novel “similarity and truth estimation for propagated segmentations” (STEPS) compared to the traditional “simultaneous truth and performance level estimation” (STAPLE) algorithm. Methods: First, 6 OARs were contoured by 2 radiation oncologists in a dataset of 100 patients with head and neck cancer on planning computed tomography images. Each image in the dataset was then automatically segmented with STAPLE and STEPS using those manual contours. Dice similarity coefficient (DSC) wasmore » then used to compare the accuracy of these automatic methods. Second, in a blind experiment, three separate and distinct trained physicians graded manual and automatic segmentations into one of the following three grades: clinically acceptable as determined by universal delineation guidelines (grade A), reasonably acceptable for clinical practice upon manual editing (grade B), and not acceptable (grade C). Finally, STEPS segmentations graded B were selected and one of the physicians manually edited them to grade A. Editing time was recorded. Results: Significant improvements in DSC can be seen when using the STEPS algorithm on large structures such as the brainstem, spinal canal, and left/right parotid compared to the STAPLE algorithm (all p < 0.001). In addition, across all three trained physicians, manual and STEPS segmentation grades were not significantly different for the brainstem, spinal canal, parotid (right/left), and optic chiasm (all p > 0.100). In contrast, STEPS segmentation grades were lower for the eyes (p < 0.001). Across all OARs and all physicians, STEPS produced segmentations graded as well as manual contouring at a rate of 83%, giving a lower bound on this rate of 80% with 95% confidence. Reduction in manual interaction time was on average 61% and 93% when automatic segmentations did and did not, respectively, require manual editing. Conclusions: The STEPS algorithm showed better performance than the STAPLE algorithm in segmenting OARs for radiotherapy of the head and neck. It can automatically produce clinically acceptable segmentation of OARs, with results as relevant as manual contouring for the brainstem, spinal canal, the parotids (left/right), and optic chiasm. A substantial reduction in manual labor was achieved when using STEPS even when manual editing was necessary.« less
Concomitant glenohumeral pathologies in high-grade acromioclavicular separation (type III - V).
Markel, Jochen; Schwarting, Tim; Malcherczyk, Dominik; Peterlein, Christian-Dominik; Ruchholtz, Steffen; El-Zayat, Bilal Farouk
2017-11-10
Acromioclavicular joint (ACJ) dislocations are common injuries of the shoulder associated with physical activity. The diagnosis of concomitant injuries proves complicated due to the prominent clinical symptoms of acute ACJ dislocation. Because of increasing use of minimally invasive surgery techniques concomitant pathologies are diagnosed more often than with previous procedures. The aim of this study was to identify the incidence of concomitant intraarticular injuries in patients with high-grade acromioclavicular separation (Rockwood type III - V) as well as to reveal potential risk constellations. The concomitant pathologies were compiled during routine arthroscopically assisted treatment in altogether 163 patients (147 male; 16 female; mean age 36.8 years) with high-grade acromioclavicular separation (Rockwood type III: n = 60; Rockwood type IV: n = 6; Rockwood type V: n = 97). Acromioclavicular separation occurred less often in women than men (1:9). In patients under 35, the most common cause for ACJ dislocation was sporting activity (37.4%). Rockwood type V was observed significantly more often than the other types with 57.5% (Rockwood type III = 36.8%, Rockwood type IV 3.7%). Concomitant pathologies were diagnosed in 39.3% of the patients with that number rising to as much as 57.3% in patients above 35 years. Most common associated injuries were rotator cuff injuries (32.3%), chondral defects (30.6%) and SLAP-lesions (22.6%). Of all patients, 8.6% needed additional reconstructive surgery. Glenohumeral injuries are a much more common epiphenomenon during acromioclavicular separation than previously ascertained. High risk group for accompanying injuries are patients above 35 years with preexisting degenerative disease. The increasing use of minimally invasive techniques allows for an easier diagnosis and simultaneous treatment of the additional pathologies.
Clinicopathological relevance of tumour grading in canine osteosarcoma.
Loukopoulos, P; Robinson, W F
2007-01-01
Tumour grading assesses biological aggressiveness and is of prognostic significance in many malignancies. The clinicopathological features of 140 primary canine osteosarcomas and their metastases were analysed, and the interrelations between them and an established grading system and its constituent parameters (mitotic index, necrosis, pleomorphism) were examined. Of these tumours, 35% were grade III (high-grade), 37% grade II and 28% grade I. Primary tumours that had metastasized were of significantly higher grade than non-metastatic osteosarcomas. Osteosarcomas belonging to the osteoblastic minimally productive subtype, but not chondroblastic or telangiectatic subtypes, differed from fibroblastic osteosarcomas in being associated with a significantly higher number of high-grade cases. Dogs younger than 4 years of age had osteosarcomas with higher grade, score and mitotic index than did older animals. Appendicular differed from axial tumours in having a higher mitotic index; distal differed from proximal tumours in being of higher grade; cranial tumours differed from tumours in most other sites in being of lower grade and lower mitotic index. Rib osteosarcomas showed a particularly high degree of necrosis. The mitotic index varied widely between tumour locations. Pleomorphism did not have prognostic merit when examined separately, as most osteosarcomas were highly pleomorphic.
McKenney, Jesse K; Wei, Wei; Hawley, Sarah; Auman, Heidi; Newcomb, Lisa F; Boyer, Hilary D; Fazli, Ladan; Simko, Jeff; Hurtado-Coll, Antonio; Troyer, Dean A; Tretiakova, Maria S; Vakar-Lopez, Funda; Carroll, Peter R; Cooperberg, Matthew R; Gleave, Martin E; Lance, Raymond S; Lin, Dan W; Nelson, Peter S; Thompson, Ian M; True, Lawrence D; Feng, Ziding; Brooks, James D
2016-11-01
Histologic grading remains the gold standard for prognosis in prostate cancer, and assessment of Gleason score plays a critical role in active surveillance management. We sought to optimize the prognostic stratification of grading and developed a method of recording and studying individual architectural patterns by light microscopic evaluation that is independent of standard Gleason grade. Some of the evaluated patterns are not assessed by current Gleason grading (eg, reactive stromal response). Individual histologic patterns were correlated with recurrence-free survival in a retrospective postradical prostatectomy cohort of 1275 patients represented by the highest-grade foci of carcinoma in tissue microarrays. In univariable analysis, fibromucinous rupture with varied epithelial complexity had a significantly lower relative risk of recurrence-free survival in cases graded as 3+4=7. Cases having focal "poorly formed glands," which could be designated as pattern 3+4=7, had lower risk than cribriform patterns with either small cribriform glands or expansile cribriform growth. In separate multivariable Cox proportional hazard analyses of both Gleason score 3+3=6 and 3+4=7 carcinomas, reactive stromal patterns were associated with worse recurrence-free survival. Decision tree models demonstrate potential regrouping of architectural patterns into categories with similar risk. In summary, we argue that Gleason score assignment by current consensus guidelines are not entirely optimized for clinical use, including active surveillance. Our data suggest that focal poorly formed gland and cribriform patterns, currently classified as Gleason pattern 4, should be in separate prognostic groups, as the latter is associated with worse outcome. Patterns with extravasated mucin are likely overgraded in a subset of cases with more complex epithelial bridges, whereas stromogenic cancers have a worse outcome than conveyed by Gleason grade alone. These findings serve as a foundation to facilitate optimization of histologic grading and strongly support incorporating reactive stroma into routine assessment.
Graded-index whispering gallery mode resonators
NASA Technical Reports Server (NTRS)
Savchenkov, Anatoliy (Inventor); Maleki, Lutfollah (Inventor); Ilchenko, Vladimir (Inventor); Matsko, Andrey B. (Inventor)
2005-01-01
Whispering gallery mode optical resonators which have spatially-graded refractive indices. In one implementation, the refractive index spatially increases with a distance from an exterior surface of such a resonator towards an interior of the resonator to produce substantially equal spectral separations for different whispering gallery modes. An optical coupler may be used with such a resonator to provide proper optical coupling.
Criterion Referenced Assessment Bank. Grade 6 Skill Clusters, Objectives, and Illustrations.
ERIC Educational Resources Information Center
Montgomery County Public Schools, Rockville, MD.
Part of a series of competency-based test materials for grades six through ten, this set of nine test booklets for sixth graders contains multiple-choice questions designed to aid in the evaluation of the pupils' library skills. Accompanied by a separate, tenth booklet of illustrations which are to be used in conjunction with the questions, the…
ERIC Educational Resources Information Center
Hill, Grant; Cleven, Brian
2005-01-01
The purposes of this study were to determine the physical education activity preferences of 9th grade students in a southern California school district, to identify which activities students felt should be offered in coeducation or gender separate formats, and to determine whether physical education is one of their favorite classes. Results…
Computer Literacy. A Co-Ser Project of Cortland-Madison BOCES, Summer 1983.
ERIC Educational Resources Information Center
Rausa, Tom; And Others
This project was designed to prepare curriculum materials that can be used to teach general computer literacy and rudimentary programming for grades 7 and 8. The intended audience for these materials is the grade 7 and 8 teacher who is not experienced in computer literacy or programming. Materials provided include, in separate sections for the two…
Exploring the Co-Development of Reading Fluency and Reading Comprehension: A Twin Study
ERIC Educational Resources Information Center
Little, Callie W.; Hart, Sara A.; Quinn, Jamie M.; Tucker-Drob, Elliot M.; Taylor, Jeanette; Schatschneider, Christopher
2017-01-01
This study explores the co-development of two related but separate reading skills, reading fluency and reading comprehension, across Grades 1-4. A bivariate biometric dual change score model was applied to longitudinal data collected from 1,784 twin pairs between the ages of 6 and 10 years. Grade 1 skills were influenced by highly overlapping…
Intelligence--Group Administered, Grades 4-6. Collection. Annotated Bibliography of Tests.
ERIC Educational Resources Information Center
Educational Testing Service, Princeton, NJ. Test Collection.
Most of the 28 tests included in this bibliography assess intelligence and provide an actual I.Q. score or one that is statistically similar. (A complete list of mental or cognitive ability tests is available separately.) Although all ages are represented, the majority of tests are targeted to grades 4 through 6. This document is one in a series…
Simultaneous miocene extension and shortening in the himalayan orogen.
Hodges, K V; Parrish, R R; Housh, T B; Lux, D R; Burchfiel, B C; Royden, L H; Chen, Z
1992-11-27
The South Tibetan detachment system separates the high-grade metamorphic core of the Himalayan orogen from its weakly metamorphosed suprastructure. It is thought to have developed in response to differences in gravitational potential energy produced by crustal thickening across the mountain front. Geochronologic data from the Rongbuk Valley, north of Qomolangma (Mount Everest) in southern Tibet, demonstrate that at least one segment of the detachment system was active between 19 and 22 million years ago, an interval characterized by large-scale crustal thickening at lower structural levels. These data suggest that decoupling between an extending upper crust and a converging lower crust was an important aspect of Himalayan tectonics in Miocene time.
Photogrammetry of a 5m Inflatable Space Antenna With Consumer Digital Cameras
NASA Technical Reports Server (NTRS)
Pappa, Richard S.; Giersch, Louis R.; Quagliaroli, Jessica M.
2000-01-01
This paper discusses photogrammetric measurements of a 5m-diameter inflatable space antenna using four Kodak DC290 (2.1 megapixel) digital cameras. The study had two objectives: 1) Determine the photogrammetric measurement precision obtained using multiple consumer-grade digital cameras and 2) Gain experience with new commercial photogrammetry software packages, specifically PhotoModeler Pro from Eos Systems, Inc. The paper covers the eight steps required using this hardware/software combination. The baseline data set contained four images of the structure taken from various viewing directions. Each image came from a separate camera. This approach simulated the situation of using multiple time-synchronized cameras, which will be required in future tests of vibrating or deploying ultra-lightweight space structures. With four images, the average measurement precision for more than 500 points on the antenna surface was less than 0.020 inches in-plane and approximately 0.050 inches out-of-plane.
Thin films of aluminum nitride and aluminum gallium nitride for cold cathode applications
DOE Office of Scientific and Technical Information (OSTI.GOV)
Sowers, A.T.; Christman, J.A.; Bremser, M.D.
1997-10-01
Cold cathode structures have been fabricated using AlN and graded AlGaN structures (deposited on n-type 6H-SiC) as the thin film emitting layer. The cathodes consist of an aluminum grid layer separated from the nitride layer by a SiO{sub 2} layer and etched to form arrays of either 1, 3, or 5 {mu}m holes through which the emitting nitride surface is exposed. After fabrication, a hydrogen plasma exposure was employed to activate the cathodes. Cathode devices with 5 {mu}m holes displayed emission for up to 30 min before failing. Maximum emission currents ranged from 10{endash}100 nA and required grid voltages rangingmore » from 20{endash}110 V. The grid currents were typically 1 to 10{sup 4} times the collector currents. {copyright} {ital 1997 American Institute of Physics.}« less
Personality structure and social style in macaques.
Adams, Mark James; Majolo, Bonaventura; Ostner, Julia; Schülke, Oliver; De Marco, Arianna; Thierry, Bernard; Engelhardt, Antje; Widdig, Anja; Gerald, Melissa S; Weiss, Alexander
2015-08-01
Why regularities in personality can be described with particular dimensions is a basic question in differential psychology. Nonhuman primates can also be characterized in terms of personality structure. Comparative approaches can help reveal phylogenetic constraints and social and ecological patterns associated with the presence or absence of specific personality dimensions. We sought to determine how different personality structures are related to interspecific variation in social style. Specifically, we examined this question in 6 different species of macaques, because macaque social style is well characterized and can be categorized on a spectrum of despotic (Grade 1) versus tolerant (Grade 4) social styles. We derived personality structures from adjectival ratings of Japanese (Macaca fuscata; Grade 1), Assamese (M. assamensis; Grade 2), Barbary (M. sylvanus; Grade 3), Tonkean (M. tonkeana; Grade 4), and crested (M. nigra; Grade 4) macaques and compared these species with rhesus macaques (M. mulatta; Grade 1) whose personality was previously characterized. Using a nonparametric method, fuzzy set analysis, to identify commonalities in personality dimensions across species, we found that all but 1 species exhibited consistently defined Friendliness and Openness dimensions, but that similarities in personality dimensions capturing aggression and social competence reflect similarities in social styles. These findings suggest that social and phylogenetic relationships contribute to the origin, maintenance, and diversification of personality. (c) 2015 APA, all rights reserved.
Waldenberg, Christian; Hebelka, Hanna; Brisby, Helena; Lagerstrand, Kerstin Magdalena
2018-05-01
Magnetic resonance imaging (MRI) is the best diagnostic imaging method for low back pain. However, the technique is currently not utilized in its full capacity, often failing to depict painful intervertebral discs (IVDs), potentially due to the rough degeneration classification system used clinically today. MR image histograms, which reflect the IVD heterogeneity, may offer sensitive imaging biomarkers for IVD degeneration classification. This study investigates the feasibility of using histogram analysis as means of objective and continuous grading of IVD degeneration. Forty-nine IVDs in ten low back pain patients (six males, 25-69 years) were examined with MRI (T2-weighted images and T2-maps). Each IVD was semi-automatically segmented on three mid-sagittal slices. Histogram features of the IVD were extracted from the defined regions of interest and correlated to Pfirrmann grade. Both T2-weighted images and T2-maps displayed similar histogram features. Histograms of well-hydrated IVDs displayed two separate peaks, representing annulus fibrosus and nucleus pulposus. Degenerated IVDs displayed decreased peak separation, where the separation was shown to correlate strongly with Pfirrmann grade (P < 0.05). In addition, some degenerated IVDs within the same Pfirrmann grade displayed diametrically different histogram appearances. Histogram features correlated well with IVD degeneration, suggesting that IVD histogram analysis is a suitable tool for objective and continuous IVD degeneration classification. As histogram analysis revealed IVD heterogeneity, it may be a clinical tool for characterization of regional IVD degeneration effects. To elucidate the usefulness of histogram analysis in patient management, IVD histogram features between asymptomatic and symptomatic individuals needs to be compared.
The geology of the Inconsolable Range, east-central Sierra Nevada, California
DOE Office of Scientific and Technical Information (OSTI.GOV)
Hathaway, G.M; Reed, W.E.
1993-04-01
Detailed mapping of the Inconsolable Range in the east-central Sierra Nevada reveals a structurally and lithologically complex region of multi-phase intrusions. Some plutons are compositionally-zoned [e.g., Inconsolable (100 Ma) and Lamarck (90 Ma)]; others may be the result of magma mixing. Intrusive borders vary from brittle to ductile and sharp to gradational, and are bounded by contact aureoles of varying metamorphic grade. A shear zone (Long Lake shear zone -- LLSZ) bounds the western margin of the Inconsolable Range for 8 km; this is truncated in the south by the Cretaceous Lamarck intrusive suite, and is tectonically overlain in themore » north by the Bishop Creek Pendant (Ordovician ). The LLSZ is a complex zone of interleaved septa of biotite schists, orthogneisses, aplitic screens, and calc-silicate gneisses approximately 500 to 800 m wide. Preliminary interpretation suggests that the LLSZ is the sheared remnant of a Triassic-Jurassic igneous terrane complete with metasedimentary pendants. Juxtaposition of greenschist facies meta-sedimentary rocks of the Chocolate Peak klippe over highly deformed amphibolite grade meta-igneous rocks of the LLSZ postdates movement along the LLSZ. Metamorphic grades suggest that deeper structural levels are exposed within the LLSZ near its southern terminus. Twenty plutonic lithologies have been mapped and informally named (e.g., Spotted biotite quartz diorite), including 3 compositionally-zoned plutons. Zonation within the Lamarck, Inconsolable, and Spotted intrusions are the result of multiple emplacement events into partially crystallized host plutons. Along the eastern border of the Lamarck intrusive suite field evidence indicates four separate intrusive events. The Inconsolable body is a compositionally-zoned biotite, clinopyroxene, quartz diorite with irregular granodiorite margins. The base of the Spotted intrusion appears to have been magmatically eroded by a pulse of the younger Lamarck intrusion.« less
Tighe, Elizabeth; Schatschneider, Christopher
2015-01-01
The purpose of the present study was to investigate and rank order by importance the contributions of various cognitive predictors to reading comprehension in third, seventh, and tenth graders. An exploratory factor analysis revealed that for third grade, the best fit was a four-factor solution including Fluency, Verbal Reasoning, Nonverbal Reasoning, and Working Memory factors. For seventh and tenth grade, three-factor solutions with Fluency, Reasoning, and Working Memory factors were the best fit. The three and four-factor models were used in separate dominance analyses for each grade to rank order the factors by predictive importance to reading comprehension. Results indicated that Fluency and Verbal Reasoning were the most important predictors of third grade reading comprehension. For seventh grade, Fluency and Reasoning were the most important predictors. By tenth grade, Reasoning was the most important predictor of reading comprehension. Working Memory was the least predictive of reading comprehension across all grade levels. These results suggest that inferential reasoning skills become an important contributor to reading comprehension at increasing grade levels. PMID:26346315
Teacher–Student Support, Effortful Engagement, and Achievement: A 3-Year Longitudinal Study
Hughes, Jan N.; Luo, Wen; Kwok, Oi-Man; Loyd, Linda K.
2008-01-01
Measures of teacher–student relationship quality (TSRQ), effortful engagement, and achievement in reading and math were collected once each year for 3 consecutive years, beginning when participants were in 1st grade, for a sample of 671 (53.1% male) academically at-risk children attending 1 of 3 school districts in Texas. In separate latent variable structural equation models, the authors tested the hypothesized model, in which Year 2 effortful engagement mediated the association between Year 1 TSRQ and Year 3 reading and math skills. Conduct engagement was entered as a covariate in these analyses to disentangle the effects of effortful engagement and conduct engagement. Reciprocal effects of effortful engagement on TSRQ and of achievement on effortful engagement were also modeled. Results generally supported the hypothesized model. Year 1 variables had a direct effect on Year 3 variables, above year-to-year stability. Findings suggest that achievement, effortful engagement, and TSRQ form part of a dynamic system of influences in the early grades, such that intervening at any point in this nexus may alter children’s school trajectories. PMID:19578558
Edible lipid nanoparticles: digestion, absorption, and potential toxicity.
McClements, David Julian
2013-10-01
Food-grade nanoemulsions are being increasingly used in the food and beverage industry to encapsulate, protect, and deliver hydrophobic functional components, such as oil-soluble flavors, colors, preservatives, vitamins, and nutraceuticals. These nanoemulsions contain lipid nanoparticles (radius <100 nm) whose physicochemical characteristics (e.g., composition, dimensions, structure, charge, and physical state) can be controlled by selection of appropriate ingredients and fabrication techniques. Nanoemulsions have a number of potential advantages over conventional emulsions for applications within the food industry: higher stability to particle aggregation and gravitational separation; higher optical transparency; and, increased bioavailability of encapsulated components. On the other hand, there are also some risks associated with consumption of lipid nanoparticles that should be considered before they are widely utilized, such as their ability to alter the fate of bioactive components within the gastrointestinal tract and the potential toxicity of some of the components used in their fabrication (e.g., surfactants and organic solvents). This article provides an overview of the current status of the biological fate and potential toxicity of food-grade lipid nanoparticles suitable for utilization within the food and beverage industry. Copyright © 2013 Elsevier Ltd. All rights reserved.
ECONOMICS AND THE SEARCH FOR OFFSHORE HEAVY MINERAL DEPOSITS.
Attanasi, E.D.; DeYoung, J.H.
1987-01-01
This paper examines the relative importance, in terms of a deposit's commercial status, of physical characteristics of onshore titanium-bearing heavy-mineral placer deposits, and applies these findings to the search for and evaluation of offshore deposits. Results obtained by applying statistical discriminant analysis show that the characteristics most useful for predicting a deposit's commercial status are the grades of the constituent titanium minerals and the size of the deposit. Heavy-mineral grade or even the combined grades of all titanium-bearing minerals (without information and constituent mineral grades) are inferior predictors of a deposit's commercial status. When data from homogeneous regions are analyzed separately, the ability to accurately predict the deposit's commerical status improves.
Diemer, Matthew A; Wang, Qiu; Moore, Traymanesha; Gregory, Shannon R; Hatcher, Keisha M; Voight, Adam M
2010-05-01
Structural barriers constrain marginalized youths' development of work salience and vocational expectations. Sociopolitical development (SPD), the consciousness of, and motivation to reduce, sociopolitical inequality, may facilitate the negotiation of structural constraints. A structural model of SPD's impact on work salience and vocational expectations was proposed and its generalizability tested among samples of low-socioeconomic-status African American, Latin American, and Asian American youth, with Educational Longitudinal Study data. Measurement and temporal invariance of these constructs was first established before testing the proposed model across the samples. Across the three samples, 10th-grade SPD had significant effects on 10th-grade work salience and vocational expectations; 12th-grade SPD had a significant effect on 12th-grade work salience. Tenth-grade SPD had significant indirect effects on 12th-grade work salience and on 12th-grade vocational expectations for all three samples. These results suggest that SPD facilitates the agentic negotiation of constraints on the development of work salience and vocational expectations. Given the impact of adolescent career development on adult occupational attainment, SPD may also foster social mobility among youth constrained by an inequitable opportunity structure. 2010 APA, all rights reserved
ERIC Educational Resources Information Center
Joong, Peter; Xiong, Ying; Li, Lin; Pan, Chun Jian
2009-01-01
The objective of this study was to examine how and to what extent Grades 7 and 8 teachers have implemented educational reforms in China that have had a direct impact on students, teachers, and parents. Major sources of data for this study were separate anonymous surveys for teachers, students, and parents. The study concluded that teachers and…
ERIC Educational Resources Information Center
Casavantes, Edward Joseph
Two sets of data from the U.S. Commission on Civil Rights' Mexican American Education Study were selected for analysis in the areas of (1) comparative reading achievement rates of Mexican Americans and black students; and (2) differential in-grade retention rates of Anglo, Mexican American, and black students. Two separate issues were examined.…
Report on a Highly Used Computer Aid for the Professor in his Grade and Record Keeping Tasks.
ERIC Educational Resources Information Center
Brockmeier, Richard
SPARS is a computer data base management system designed to aid the college professor in handling his students' grades and other classroom data. It can handle multiple sections and labs, and allows the professor to combine and separate these components in a variety of ways. SPARS seeks to meet the sometimes competing goals of simplicity of use and…
Nardo, Lorenzo; Karampinos, Dimitrios C.; Joseph, Gabby B.; Yap, Samuel P.; Baum, Thomas; Krug, Roland; Majumdar, Sharmila; Link, Thomas M.
2013-01-01
Objective The goal of this study was to compare the semi-quantitative Goutallier classification for fat infiltration with quantitative fat-fraction derived from a magnetic resonance imaging (MRI) chemical shift-based water/fat separation technique. Methods Sixty-two women (age 61±6 years), 27 of whom had diabetes, underwent MRI of the calf using a T1-weighted fast spin-echo sequence and a six-echo spoiled gradient-echo sequence at 3 T. Water/fat images and fat fraction maps were reconstructed using the IDEAL algorithm with T2* correction and a multi-peak model for the fat spectrum. Two radiologists scored fat infiltration on the T1-weighted images using the Goutallier classification in six muscle compartments. Spearman correlations between the Goutallier grades and the fat fraction were calculated; in addition, intra-observer and inter-observer agreement were calculated. Results A significant correlation between the clinical grading and the fat fraction values was found for all muscle compartments (P<0.0001, R values ranging from 0.79 to 0.88). Goutallier grades 0–4 had a fat fraction ranging from 3.5 to 19%. Intra-observer and inter-observer agreement values of 0.83 and 0.81 were calculated for the semi-quantitative grading. Conclusion Semi-quantitative grading of intramuscular fat and quantitative fat fraction were significantly correlated and both techniques had excellent reproducibility. However, the clinical grading was found to overestimate muscle fat. PMID:22411305
40 CFR 246.200-5 - Recommended procedures: Methods of separation and collection.
Code of Federal Regulations, 2012 CFR
2012-07-01
... designed to recover high grades of office paper at the source of generation, i.e., the desk, are the... recommended system is the desk-top system because it is designed to maximize recovery of high value material... desk-top system has been designed to minimize these problems. (d) The precise method of separation and...
40 CFR 246.200-5 - Recommended procedures: Methods of separation and collection.
Code of Federal Regulations, 2013 CFR
2013-07-01
... designed to recover high grades of office paper at the source of generation, i.e., the desk, are the... recommended system is the desk-top system because it is designed to maximize recovery of high value material... desk-top system has been designed to minimize these problems. (d) The precise method of separation and...
40 CFR 246.200-5 - Recommended procedures: Methods of separation and collection.
Code of Federal Regulations, 2011 CFR
2011-07-01
... designed to recover high grades of office paper at the source of generation, i.e., the desk, are the... recommended system is the desk-top system because it is designed to maximize recovery of high value material... desk-top system has been designed to minimize these problems. (d) The precise method of separation and...
40 CFR 246.200-5 - Recommended procedures: Methods of separation and collection.
Code of Federal Regulations, 2010 CFR
2010-07-01
... designed to recover high grades of office paper at the source of generation, i.e., the desk, are the... recommended system is the desk-top system because it is designed to maximize recovery of high value material... desk-top system has been designed to minimize these problems. (d) The precise method of separation and...
40 CFR 246.200-5 - Recommended procedures: Methods of separation and collection.
Code of Federal Regulations, 2014 CFR
2014-07-01
... designed to recover high grades of office paper at the source of generation, i.e., the desk, are the... recommended system is the desk-top system because it is designed to maximize recovery of high value material... desk-top system has been designed to minimize these problems. (d) The precise method of separation and...
Coupled structural/thermal/electromagnetic analysis/tailoring of graded composite structures
NASA Technical Reports Server (NTRS)
Hartle, M. S.; Mcknight, R. L.; Huang, H.; Holt, R.
1992-01-01
Described here are the accomplishments of a 5-year program to develop a methodology for coupled structural, thermal, electromagnetic analysis tailoring of graded component structures. The capabilities developed over the course of the program are the analyzer module and the tailoring module for the modeling of graded materials. Highlighted accomplishments for the past year include the addition of a buckling analysis capability, the addition of mode shape slope calculation for flutter analysis, verification of the analysis modules using simulated components, and verification of the tailoring module.
The development of executive functions and early mathematics: a dynamic relationship.
Van der Ven, Sanne H G; Kroesbergen, Evelyn H; Boom, Jan; Leseman, Paul P M
2012-03-01
The relationship between executive functions and mathematical skills has been studied extensively, but results are inconclusive, and how this relationship evolves longitudinally is largely unknown. The aim was to investigate the factor structure of executive functions in inhibition, shifting, and updating; the longitudinal development of executive functions and mathematics; and the relation between them. A total of 211 children in grade 2 (7-8 years old) from 10 schools in the Netherlands. Children were followed in grade 1 and 2 of primary education. Executive functions and mathematics were measured four times. The test battery contained multiple tasks for each executive function: Animal stroop, local global, and Simon task for inhibition; Animal Shifting, Trail Making Test in Colours, and Sorting Task for shifting; and Digit Span Backwards, Odd One Out, and Keep Track for updating. The factor structure of executive functions was assessed and relations with mathematics were investigated using growth modelling. Confirmatory factor analysis (CFA) showed that inhibition and shifting could not be distinguished from each other. Updating was a separate factor, and its development was strongly related to mathematical development while inhibition and shifting did not predict mathematics in the presence of the updating factor. The strong relationship between updating and mathematics suggest that updating skills play a key role in the maths learning process. This makes updating a promising target for future intervention studies. ©2011 The British Psychological Society.
Control of volume resistivity in inorganic organic separators
NASA Technical Reports Server (NTRS)
Sheibley, D. W.; Manzo, M. A.
1979-01-01
Control of resistivity in NASA inorganic-organic separators is achieved by incorporating small percentages of high surface area, fine particle silica with other ingredients in the separator coating. The volume resistivity is predictable from the surface area of filler particles in the coating. The approach is applied to two polymer- plasticizer -filler coating systems, where the filler content of each is below the generally acknowledged critical pigment volume concentration of the coating. Application of these coating systems to 0.0254 cm thick (10-mil) fuel cell grade asbestos sheet produces inexpensive, flexible, microporous separators that perform as well as the original inorganic-organic concept, the Astropower separator.
Recycling of rare earth particle by mini-hydrocyclones.
Yu, Jian-Feng; Fu, Jian; Cheng, Hao; Cui, Zhengwei
2017-03-01
Mini-hydrocyclones were applied to separate the fine rare earth particles from the suspensions. The effects of the flow rate, split ratio, and feed concentration on the total separation efficiency and grade separation efficiency were studied. The combined effects of the flow rate (1200-1600L/h), split ratio (20-60%) and concentration (0.6-1.0wt%) on the total separation efficiency in mini-hydrocyclones were investigated using a response surface methodology. The optimum operating parameters for a total separation efficiency of 92.5% were: feed flow rate=1406L/h, split ratio=20%, and feed concentration=1wt%. Copyright © 2016 Elsevier Ltd. All rights reserved.
NASA Astrophysics Data System (ADS)
Barrington, Byron L.; Hendricks, Bryan
A questionnaire regarding attitudes toward science and scientific knowledge (Yager & Yager, 1985b) was administered to 143 intellectually gifted (IQ > 130) and intellectually average third-, seventh-, and eleventh-grade students. Measures of internal reliability on four attitude subscales and a content knowledge subscale are reported. Three-way ANOVAs comparing grade, sex, and ability revealed significant differences between average and gifted students in attitudes toward being a scientist, usefulness of science, and, as might be expected, in knowledge of science. Similarly, there were significant differences between grades on attitudes toward teachers and toward science classes, with the most favorable attitudes expressed in third grade, next most favorable in eleventh grade, and clearly more negative attitudes expressed by students in seventh grade. There also was a significant interaction between grade level and ability regarding attitudes toward science classes. In contrast to what might be expected from reported differences between males and females in attitudes toward science, gender as a separate variable did not have a significant main effect in any of the comparisons.
Recovery of Iron from Hematite-Rich Diasporic-Type Bauxite Ore
NASA Astrophysics Data System (ADS)
Jiang, Tao; Li, Zhuoxuan; Yang, Lin; Li, Guanghui; Zhang, Yuanbo; Zeng, Jinghua
A technique has been proposed for recovering iron from hematite-rich diasporic-type bauxite ore in this study. Direct reduction roasting followed by low intensity wet magnetic separation process was carried out. The parameters including reduction temperature and time, sodium salts, grinding conditions and magnetic field intensity for separation of iron were determined. The optimum process parameters as follows: roasting temperature of 1050 °C, time of 60 min, sodium salts involving sodium sulfate, borax, sodium carbonate with dosages of 10 wt%, 2 wt%, 35 wt% respectively, and magnetic field intensity of 1000 Gs with fineness of pulp reached 92.75% passing -0.074mm. Under the optimal conditions, an iron concentrate containing 88.17% total iron grade and iron recovery of 92.51% was obtained, 4.55% total iron grade in tailings. This novel technique provide a potential route for utilizing hematiterich diasporic bauxite ore, recovering iron resource firstly, and extracting alumina from magnetic separation tailings further.
Method of making an ion-implanted planar-buried-heterostructure diode laser
Brennan, Thomas M.; Hammons, Burrell E.; Myers, David R.; Vawter, Gregory A.
1992-01-01
Planar-buried-heterostructure, graded-index, separate-confinement-heterostructure semiconductor diode laser 10 includes a single quantum well or multi-quantum well active stripe 12 disposed between a p-type compositionally graded Group III-V cladding lever 14 and an n-type compositionally graded Group III-V cladding layer 16. The laser 10 includes an iion implanted n-type region 28 within the p-type cladding layer 14 and further includes an ion implanted p-type region 26 within the n-type cladding layer 16. The ion implanted regions are disposed for defining a lateral extent of the active stripe.
Ion-implanted planar-buried-heterostructure diode laser
Brennan, Thomas M.; Hammons, Burrell E.; Myers, David R.; Vawter, Gregory A.
1991-01-01
A Planar-Buried-Heterostructure, Graded-Index, Separate-Confinement-Heterostructure semiconductor diode laser 10 includes a single quantum well or multi-quantum well active stripe 12 disposed between a p-type compositionally graded Group III-V cladding layer 14 and an n-type compositionally graded Group III-V cladding layer 16. The laser 10 includes an ion implanted n-type region 28 within the p-type cladding layer 14 and further includes an ion implanted p-type region 26 within the n-type cladding layer 16. The ion implanted regions are disposed for defining a lateral extent of the active stripe.
Separation of VX, RVX and GB Enantiomers Using Liquid ChromatographyTime-of-Flight Mass Spectrometry
2016-02-01
Torrance, CA). The mobile phase consisted of n - hexane (A) and isopropyl alcohol (B), and sample volume was 10 µL. Separation was achieved using...level for preparative separation. All reagents and solvents were high-performance LC grade. Hexane and isopropyl alcohol were purchased from Fisher...1 column and normal-phase LC were used with a mobile phase of 96/4 (v/v %) hexane /isopropyl alcohol at a flow rate of 0.6 mL/min. The enantiomers
Junior High School Science: A Manual for Teachers. A Search for Structure. Grade 7.
ERIC Educational Resources Information Center
Baltimore County Public Schools, Towson, MD.
GRADES OR AGES: Grade 7. SUBJECT MATTER: Science. ORGANIZATION AND PHYSICAL APPEARANCE: The introduction describes the development of the junior high school science program. The main text is divided into three phases: Processes and Skills, Developing a Model of Matter, and Human Structure and Function. Phase I contains two subcategories: Rocks and…
Linking log quality with product performance
D. W. Green; Robert Ross
1997-01-01
In the United States, log grading procedures use visual assessment of defects, in relation to the log scaling diameter, to estimate the yield of lumber that maybe expected from the log. This procedure was satisfactory when structural grades were based only on defect size and location. In recent years, however, structural products have increasingly been graded using a...
ERIC Educational Resources Information Center
Hagger, Martin S.; Biddle, Stuart J. H.; John Wang, C. K.
2005-01-01
This study tests the generalizability of the factor pattern, structural parameters, and latent mean structure of a multidimensional, hierarchical model of physical self-concept in adolescents across gender and grade. A children's version of the Physical Self-Perception Profile (C-PSPP) was administered to seventh-, eighth- and ninth-grade high…
Growth in Reading Performance during the First Four Years in School. Research Report. ETS RR-07-39
ERIC Educational Resources Information Center
Rock, Donald A.
2007-01-01
This study addressed concerns about the potential for differential gains in reading during the first 2 years of formal schooling (K-1) versus the next 2 years of schooling (1st-3rd grade). A multilevel piecewise regression with a node at spring 1st grade was used in order to define separate regressions for the two time periods. Empirical Bayes…
Shackelford, S D; Wheeler, T L; Koohmaraie, M
2003-01-01
The present experiment was conducted to evaluate the ability of the U.S. Meat Animal Research Center's beef carcass image analysis system to predict calculated yield grade, longissimus muscle area, preliminary yield grade, adjusted preliminary yield grade, and marbling score under commercial beef processing conditions. In two commercial beef-processing facilities, image analysis was conducted on 800 carcasses on the beef-grading chain immediately after the conventional USDA beef quality and yield grades were applied. Carcasses were blocked by plant and observed calculated yield grade. The carcasses were then separated, with 400 carcasses assigned to a calibration data set that was used to develop regression equations, and the remaining 400 carcasses assigned to a prediction data set used to validate the regression equations. Prediction equations, which included image analysis variables and hot carcass weight, accounted for 90, 88, 90, 88, and 76% of the variation in calculated yield grade, longissimus muscle area, preliminary yield grade, adjusted preliminary yield grade, and marbling score, respectively, in the prediction data set. In comparison, the official USDA yield grade as applied by online graders accounted for 73% of the variation in calculated yield grade. The technology described herein could be used by the beef industry to more accurately determine beef yield grades; however, this system does not provide an accurate enough prediction of marbling score to be used without USDA grader interaction for USDA quality grading.
NASA Astrophysics Data System (ADS)
Fathollahi Khalkhali, T.; Bananej, A.
2017-10-01
In this paper, we investigate the transmission of a 10-femtosecond pulse through an ordinary and graded index coupled-cavity waveguide, using finite-difference time-domain and transfer matrix method. The ordinary structure is composed of dielectric/liquid crystal layers in which four defect layers are placed symmetrically. Next, we introduce a graded structure based on the ordinary system in which dielectric refractive index slightly increases with a constant step value from the beginning to the end of the structure while liquid crystal layers are maintained unchanged. Simulation results reveal that by applying an external static electric field and controlling liquid crystal refractive index in graded structure, it is possible to transmit an ultrashort pulse with negligible distortion and attenuation.
Chapter 4:Grading and properties of hardwood structural lumber
David W. Green
2005-01-01
Structural lumber markets have traditionally been dominated by softwood species. Historically, however, hardwood species have been extensively used for certain structural products such as timbers for railway and highway bridges, railway ties, mine timbers, and for pallets and containers. In the 1920s, when uniform procedures were first developed for structural grading...
Baird, Zane; Wei, Pu; Cooks, R Graham
2015-02-07
A method is presented in which ions are generated and manipulated in the ambient environment using polymeric electrodes produced with a consumer-grade 3D printer. The ability to focus, separate, react, and detect ions in the ambient environment is demonstrated and the data agree well with simulated ion behaviour.
Pinxten, Maarten; Marsh, Herbert W; De Fraine, Bieke; Van Den Noortgate, Wim; Van Damme, Jan
2014-03-01
The multidimensionality of the academic self-concept in terms of domain specificity has been well established in previous studies, whereas its multidimensionality in terms of motivational functions (the so-called affect-competence separation) needs further examination. This study aims at exploring differential effects of enjoyment and competence beliefs on two external validity criteria in the field of mathematics. Data analysed in this study were part of a large-scale longitudinal research project. Following a five-wave design, math enjoyment, math competence beliefs, math achievement, and perceived math effort expenditure measures were repeatedly collected from a cohort of 4,724 pupils in Grades 3-7. Confirmatory factor analysis (CFA) was used to test the internal factor structure of the math self-concept. Additionally, a series of nested models was tested using structural equation modelling to examine longitudinal reciprocal interrelations between math competence beliefs and math enjoyment on the one hand and math achievement and perceived math effort expenditure on the other. Our results showed that CFA models with separate factors for math enjoyment and math competence beliefs fit the data substantially better than models without it. Furthermore, differential relationships between both constructs and the two educational outcomes were observed. Math competence beliefs had positive effects on math achievement and negative effects on perceived math effort expenditure. Math enjoyment had (mild) positive effects on subsequent perceived effort expenditure and math competence beliefs. This study provides further support for the affect-competence separation. Theoretical issues regarding adequate conceptualization and practical consequences for practitioners are discussed. © 2013 The British Psychological Society.
Processing of electronic waste in a counter current teeter-bed separator.
Dey, Sujit Kumar; Ari, Vidyadhar; Das, Avimanyu
2012-09-30
Advanced gravity separation of ground electronic waste (e-waste) in a teeter-bed separator was investigated. It was established that the Floatex Density Seprator (FDS) is a promising device for wet processing of e-waste to recover metal values physically. It was possible to enrich the metal content from 23% in the feed to 37% in the product in a single stage operation using the FDS with over 95% recovery of the metals. A two-stage processing scheme was developed that enriched the metal content further to 48.2%. The influence of the operating variables, namely, teeter water flow rate, bed pressure and feed rate were quantified. Low bed pressures and low teeter water rates produced higher mass yields with poorer product grades. On the contrary, a high bed pressure and high teeter water rate combination led to a lower mass yield but better product quality. A high feed rate introduced en-masse settling leading to higher yield but at a poorer product grade. For an FDS with 230 mm × 230 mm cross section and a height of 530 mm, the process condition with 6.6l pm teeter water rate, 5.27 kPa bed pressure and 82 kg/hr feed rate maximized the yield for a target product grade of 37% metal in a single pass. Copyright © 2012 Elsevier Ltd. All rights reserved.
The role of RhD agglutination for the detection of weak D red cells by anti-D flow cytometry.
Grey, D E; Davies, J I; Connolly, M; Fong, E A; Erber, W N
2005-04-01
Anti-D flow cytometry is an accurate method for quantifying feto-maternal haemorrhage (FMH). However, weak D red cells with <1000 RhD sites are not detectable using this methodology but are immunogenic. As quantitation of RhD sites is not practical, an alternative approach is required to identify those weak D fetal red cells where anti-D flow cytometry is inappropriate. We describe a simple algorithm based on RhD agglutination and flow cytometry peak separation. All weak D (n = 34) gave weak agglutination with RUM-1 on immediate spin (grading =2.5). In Diamed-ID Diaclon ABO/D or ABO/Rh for Newborn cards two subgroups of weak D were observed. In one subgroup, weak agglutination (grading 3) was observed and the red cells were undetectable by flow cytometry. In the second subgroup, agglutination was strong (grading 4) and the red cells were detectable by anti-D flow cytometry. The accuracy of the quantitation was dependent on adequate separation of the weak D and RhD-negative peaks as in seven of 11 samples <1.11% of an expected 2% red cells were detectable. Monitoring RhD agglutination and flow cytometric peak separation are pivotal if anti-D flow cytometry is to be maintained as the primary technique for FMH quantitation in the routine laboratory.
Foorman, Barbara R.; Herrera, Sarah; Petscher, Yaacov; Mitchell, Alison; Truckenmiller, Adrea
2016-01-01
This study examined the structure of oral language and reading and their relation to comprehension from a latent variable modeling perspective in Kindergarten, Grade 1, and Grade 2. Participants were students in Kindergarten (n = 218), Grade 1 (n = 372), and Grade 2 (n = 273), attending Title 1 schools. Students were administered phonological awareness, syntax, vocabulary, listening comprehension, and decoding fluency measures in mid-year. Outcome measures included a listening comprehension measure in Kindergarten and a reading comprehension test in Grades1 and 2. In Kindergarten, oral language (consisting of listening comprehension, syntax, and vocabulary) shared variance with phonological awareness in predicting a listening comprehension outcome. However, in Grades 1 and 2, phonological awareness was no longer predictive of reading comprehension when decoding fluency and oral language were included in the model. In Grades 1 and 2, oral language and decoding fluency were significant predictors of reading comprehension. PMID:27660395
NASA Technical Reports Server (NTRS)
Larsson, A.; Cody, J.; Forouhar, S.; Lang, R. J.
1990-01-01
Highly efficient ridge waveguide pseudomorphic single quantum well lasers, emitting at 980 nm, have been fabricated from an In(0.2)Ga(0.8)As/GaAs/AlGaAs graded-index separate confinement heterostructure grown by molecular beam epitaxy. The laterial index guiding provided by the ridge reduces the anomalously large lateral loss of optical power found in gain-guided structures, thereby reducing the internal loss by more than 50 percent. The low threshold current (7.6 mA) and high differential quantum efficiency (79 percent) obtained under continuous operation as well as the transparency of the GaAs substrate to the emitted radiation render these lasers attractive for Ga-As-based optoelectronic integration.
NASA Astrophysics Data System (ADS)
Feng, Cheng; Zhang, Yijun; Qian, Yunsheng; Wang, Ziheng; Liu, Jian; Chang, Benkang; Shi, Feng; Jiao, Gangcheng
2018-04-01
A theoretical emission model for AlxGa1-xAs/GaAs cathode with complex structure based on photon-enhanced thermionic emission is developed by utilizing one-dimensional steady-state continuity equations. The cathode structure comprises a graded-composition AlxGa1-xAs window layer and an exponential-doping GaAs absorber layer. In the deduced model, the physical properties changing with the Al composition are taken into consideration. Simulated current-voltage characteristics are presented and some important factors affecting the conversion efficiency are also illustrated. Compared with the graded-composition and uniform-doping cathode structure, and the uniform-composition and uniform-doping cathode structure, the graded-composition and exponential-doping cathode structure can effectively improve the conversion efficiency, which is ascribed to the twofold built-in electric fields. More strikingly, this graded bandgap structure is especially suitable for photon-enhanced thermionic emission devices since a higher conversion efficiency can be achieved at a lower temperature.
Alizai, Hamza; Nardo, Lorenzo; Karampinos, Dimitrios C; Joseph, Gabby B; Yap, Samuel P; Baum, Thomas; Krug, Roland; Majumdar, Sharmila; Link, Thomas M
2012-07-01
The goal of this study was to compare the semi-quantitative Goutallier classification for fat infiltration with quantitative fat-fraction derived from a magnetic resonance imaging (MRI) chemical shift-based water/fat separation technique. Sixty-two women (age 61 ± 6 years), 27 of whom had diabetes, underwent MRI of the calf using a T1-weighted fast spin-echo sequence and a six-echo spoiled gradient-echo sequence at 3 T. Water/fat images and fat fraction maps were reconstructed using the IDEAL algorithm with T2* correction and a multi-peak model for the fat spectrum. Two radiologists scored fat infiltration on the T1-weighted images using the Goutallier classification in six muscle compartments. Spearman correlations between the Goutallier grades and the fat fraction were calculated; in addition, intra-observer and inter-observer agreement were calculated. A significant correlation between the clinical grading and the fat fraction values was found for all muscle compartments (P < 0.0001, R values ranging from 0.79 to 0.88). Goutallier grades 0-4 had a fat fraction ranging from 3.5 to 19%. Intra-observer and inter-observer agreement values of 0.83 and 0.81 were calculated for the semi-quantitative grading. Semi-quantitative grading of intramuscular fat and quantitative fat fraction were significantly correlated and both techniques had excellent reproducibility. However, the clinical grading was found to overestimate muscle fat. Fat infiltration of muscle commonly occurs in many metabolic and neuromuscular diseases. • Image-based semi-quantitative classifications for assessing fat infiltration are not well validated. • Quantitative MRI techniques provide an accurate assessment of muscle fat.
The Latent Structure of Spatial Skills and Mathematics: A Replication of the Two-Factor Model
ERIC Educational Resources Information Center
Mix, Kelly S.; Levine, Susan C.; Cheng, Yi-Lang; Young, Christopher J.; Hambrick, David Z.; Konstantopoulos, Spyros
2017-01-01
In a previous study, Mix et al. (2016) reported that spatial skill and mathematics were composed of 2 highly correlated, domain-specific factors, with a few cross-domain loadings. The overall structure was consistent across grade (kindergarten, 3rd grade, 6th grade), but the cross-domain loadings varied with age. The present study sought to…
NASA Astrophysics Data System (ADS)
Kheloufi, A.; Bobocioiu, E.; Kerkar, F.; Kefaifi, A.; Anas, S.; Medjahed, S. A.; Belkacem, Y.; Keffous, A.
2017-03-01
We assess the potential use as raw material for photovoltaics of Algerian silica samples from the quartz veins of the Tirek deposit and quartz sandstones of the Ain Barda deposit. With 97-98% purity, they all require enrichment before their industrial utilization. Acid leaching and gravimetric separation are used to remove the impurities at the grain boundaries and within the crystal lattice. We obtain course, middle, and fine products. The acid leaching process and the gravimetric separation increase the content of SiO2 up to 99.68%; the residue concentration of iron, alumina and zirconium is decreased to 70, 72 and 58 ppm respectively. These values are in agreement with requirements for silica as raw material destined for solar-grade silicon production.
Design Principles of Perovskites for Thermochemical Oxygen Separation
Ezbiri, Miriam; Allen, Kyle M.; Gàlvez, Maria E.; Steinfeld, Aldo
2015-01-01
Abstract Separation and concentration of O2 from gas mixtures is central to several sustainable energy technologies, such as solar‐driven synthesis of liquid hydrocarbon fuels from CO2, H2O, and concentrated sunlight. We introduce a rationale for designing metal oxide redox materials for oxygen separation through “thermochemical pumping” of O2 against a pO2 gradient with low‐grade process heat. Electronic structure calculations show that the activity of O vacancies in metal oxides pinpoints the ideal oxygen exchange capacity of perovskites. Thermogravimetric analysis and high‐temperature X‐ray diffraction for SrCoO3−δ, BaCoO3−δ and BaMnO3−δ perovskites and Ag2O and Cu2O references confirm the predicted performance of SrCoO3−δ, which surpasses the performance of state‐of‐the‐art Cu2O at these conditions with an oxygen exchange capacity of 44 mmol O 2 mol SrCoO 3−δ −1 exchanged at 12.1 μmol O 2 min−1 g−1 at 600–900 K. The redox trends are understood due to lattice expansion and electronic charge transfer. PMID:25925955
Design Principles of Perovskites for Thermochemical Oxygen Separation.
Ezbiri, Miriam; Allen, Kyle M; Gàlvez, Maria E; Michalsky, Ronald; Steinfeld, Aldo
2015-06-08
Separation and concentration of O2 from gas mixtures is central to several sustainable energy technologies, such as solar-driven synthesis of liquid hydrocarbon fuels from CO2 , H2 O, and concentrated sunlight. We introduce a rationale for designing metal oxide redox materials for oxygen separation through "thermochemical pumping" of O2 against a pO2 gradient with low-grade process heat. Electronic structure calculations show that the activity of O vacancies in metal oxides pinpoints the ideal oxygen exchange capacity of perovskites. Thermogravimetric analysis and high-temperature X-ray diffraction for SrCoO3-δ , BaCoO3-δ and BaMnO3-δ perovskites and Ag2 O and Cu2 O references confirm the predicted performance of SrCoO3-δ , which surpasses the performance of state-of-the-art Cu2 O at these conditions with an oxygen exchange capacity of 44 mmol O 2 mol SrCoO 3-δ(-1) exchanged at 12.1 μmol O 2 min(-1) g(-1) at 600-900 K. The redox trends are understood due to lattice expansion and electronic charge transfer. © 2015 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.
ERIC Educational Resources Information Center
Midgette, Ekaterina; Haria, Priti
2016-01-01
The purpose of the study was to investigate the effects of two comprehensive argumentative writing interventions--Text Structure Instruction (TSI) and Text Structure Revision Instruction (TSRI)--on the eighth-grade students' ability to compose convincing essays that include structural elements of argumentative discourse. Both treatment groups…
ERIC Educational Resources Information Center
Wijekumar, Kausalai; Meyer, Bonnie J. F.; Lei, Puiwa
2017-01-01
Reading comprehension in the content areas is a challenge for many middle grade students. Text structure-based instruction has yielded positive outcomes in reading comprehension at all grade levels in small and large studies. The text structure strategy delivered via the web, called Intelligent Tutoring System for the Text Structure Strategy…
Comparison of Different Methods of Grading a Level Turn Task on a Flight Simulator
NASA Technical Reports Server (NTRS)
Heath, Bruce E.; Crier, tomyka
2003-01-01
With the advancements in the computing power of personal computers, pc-based flight simulators and trainers have opened new avenues in the training of airplane pilots. It may be desirable to have the flight simulator make a quantitative evaluation of the progress of a pilot's training thereby reducing the physical requirement of the flight instructor who must, in turn, watch every flight. In an experiment, University students conducted six different flights, each consisting of two level turns. The flights were three minutes in duration. By evaluating videotapes, two certified flight instructors provided separate letter grades for each turn. These level turns were also evaluated using two other computer based grading methods. One method determined automated grades based on prescribed tolerances in bank angle, airspeed and altitude. The other method used was deviations in altitude and bank angle for performance index and performance grades.
Predicted sedimentary record of reflected bores
Higman, B.; Gelfenbaum, G.; Lynett, P.; Moore, A.; Jaffe, B.
2007-01-01
Where a steep slope blocks an inrushing tsunami, the tsunami commonly reverses direction as a reflected bore. A simple method for relating vertical and horizontal variation in sediment size to output from numerical models of depth-averaged tsunami flow yields predictions about the sedimentary record of reflected bores: 1. Near the reflector, a abrupt slowing of the flow as the reflected bore passes is recorded by a normally graded layer that drapes preexisting topography. 2. At intermediate distances from the reflector, the deposit consists of a single normally graded bed deposited preferentially in depressions, possibly including a sharp fine-over-coarse contact. This contact records a brief period of erosion as the front of the reflected bore passes. 3. Far seaward of the reflector, grading in the deposit includes two distinct normally graded beds deposited preferentially in depressions separated by an erosional unconformity. The second normally graded bed records the reflected bore.
Band structures in fractal grading porous phononic crystals
NASA Astrophysics Data System (ADS)
Wang, Kai; Liu, Ying; Liang, Tianshu; Wang, Bin
2018-05-01
In this paper, a new grading porous structure is introduced based on a Sierpinski triangle routine, and wave propagation in this fractal grading porous phononic crystal is investigated. The influences of fractal hierarchy and porosity on the band structures in fractal graidng porous phononic crystals are clarified. Vibration modes of unit cell at absolute band gap edges are given to manifest formation mechanism of absolute band gaps. The results show that absolute band gaps are easy to form in fractal structures comparatively to the normal ones with the same porosity. Structures with higher fractal hierarchies benefit multiple wider absolute band gaps. This work provides useful guidance in design of fractal porous phononic crystals.
Development of processes for the production of solar grade silicon from halides and alkali metals
NASA Technical Reports Server (NTRS)
Dickson, C. R.; Gould, R. K.
1980-01-01
High temperature reactions of silicon halides with alkali metals for the production of solar grade silicon in volume at low cost were studied. Experiments were performed to evaluate product separation and collection processes, measure heat release parameters for scaling purposes, determine the effects of reactants and/or products on materials of reactor construction, and make preliminary engineering and economic analyses of a scaled-up process.
Microwave Semiconductor Research-Materials, Devices and Circuits.
1987-10-01
Quantum Well and Graded Refractive Index Separate Confinement Heterostructure Quantum Well Lasers Grown Via Molecular Beam Epitaxy" JSEP PUBLICATIONS...J.M. Ballantyne and A.J. Sievers, J. Appl. Phys., 58, 3145 (1985). 6. "Epitaxial Growth and Characterization of Indian Phosphide and Gallium Indian...Approach to Dispersion Analysis in Graded Index Optical Fiber", by H.J. Carlin and Henry Zmuda. DEGREES 1. Henry Zmuda, Ph.D., July 1984 "A New Approach
Owens, Douglas K; Lohr, Kathleen N; Atkins, David; Treadwell, Jonathan R; Reston, James T; Bass, Eric B; Chang, Stephanie; Helfand, Mark
2010-05-01
To establish guidance on grading strength of evidence for the Evidence-based Practice Center (EPC) program of the U.S. Agency for Healthcare Research and Quality. Authors reviewed authoritative systems for grading strength of evidence, identified domains and methods that should be considered when grading bodies of evidence in systematic reviews, considered public comments on an earlier draft, and discussed the approach with representatives of the Grading of Recommendations Assessment, Development, and Evaluation (GRADE) working group. The EPC approach is conceptually similar to the GRADE system of evidence rating; it requires assessment of four domains: risk of bias, consistency, directness, and precision. Additional domains to be used when appropriate include dose-response association, presence of confounders that would diminish an observed effect, strength of association, and publication bias. Strength of evidence receives a single grade: high, moderate, low, or insufficient. We give definitions, examples, mechanisms for scoring domains, and an approach for assigning strength of evidence. EPCs should grade strength of evidence separately for each major outcome and, for comparative effectiveness reviews, all major comparisons. We will collaborate with the GRADE group to address ongoing challenges in assessing the strength of evidence.
Job Grading System for Trades and Labor Occupations. Part II.
ERIC Educational Resources Information Center
Civil Service Commission, Washington, DC. Bureau of Policies and Standards.
Three new standards (telephone mechanic, electroplater, and animal caretaker) for grading jobs under the Federal Wage System are cited. There is an alphabetical listing by job for published job grading standards, an occupational code-structure index for published grading standards, and a list of 61 jobs by published job grading standard with…
Shaulsky, Evyatar; Boo, Chanhee; Lin, Shihong; Elimelech, Menachem
2015-05-05
We present a hybrid osmotic heat engine (OHE) system that uses draw solutions with an organic solvent for enhanced thermal separation efficiency. The hybrid OHE system produces sustainable energy by combining pressure-retarded osmosis (PRO) as a power generation stage and membrane distillation (MD) utilizing low-grade heat as a separation stage. While previous OHE systems employed aqueous electrolyte draw solutions, using methanol as a solvent is advantageous because methanol is highly volatile and has a lower heat capacity and enthalpy of vaporization than water. Hence, the thermal separation efficiency of a draw solution with methanol would be higher than that of an aqueous draw solution. In this study, we evaluated the performance of LiCl-methanol as a potential draw solution for a PRO-MD hybrid OHE system. The membrane transport properties as well as performance with LiCl-methanol draw solution were evaluated using thin-film composite (TFC) PRO membranes and compared to the results obtained with a LiCl-water draw solution. Experimental PRO methanol flux and maximum projected power density of 47.1 L m(-2) h(-1) and 72.1 W m(-2), respectively, were achieved with a 3 M LiCl-methanol draw solution. The overall efficiency of the hybrid OHE system was modeled by coupling the mass and energy flows between the thermal separation (MD) and power generation (PRO) stages under conditions with and without heat recovery. The modeling results demonstrate higher OHE energy efficiency with the LiCl-methanol draw solution compared to that with the LiCl-water draw solution under practical operating conditions (i.e., heat recovery<90%). We discuss the implications of the results for converting low-grade heat to power.
DOE Office of Scientific and Technical Information (OSTI.GOV)
Shaulsky, E; Boo, C; Lin, SH
We present a hybrid osmotic heat engine (OHE) system that uses draw solutions with an organic solvent for enhanced thermal separation efficiency. The hybrid OHE system produces sustainable energy by combining pressure-retarded osmosis (PRO) as a power generation stage and membrane distillation (MD) utilizing low-grade heat as a separation stage. While previous OHE systems employed aqueous electrolyte draw solutions, using methanol as a solvent is advantageous because methanol is highly volatile and has a lower heat capacity and enthalpy of vaporization than water. Hence, the thermal separation efficiency of a draw solution with methanol would be higher than that ofmore » an aqueous draw solution. In this study, we evaluated the performance of LiCl-methanol as a potential draw solution for a PRO-MD hybrid OHE system. The membrane transport properties as well as performance with LiCl methanol draw solution were evaluated using thin-film composite (TFC) PRO membranes and compared to the results obtained with a LiCl water draw solution. Experimental PRO methanol flux and maximum projected power density of 47.1 L m(-2) h(-1) and 72.1 W m(-2), respectively, were achieved with a 3 M LiCl-methanol draw solution. The overall efficiency of the hybrid OHE system was modeled by coupling the mass and energy flows between the thermal separation (MD) and power generation (PRO) stages under conditions with and without heat recovery. The modeling results demonstrate higher ORE energy efficiency with the LiCl methanol draw solution compared to that with the LiCl water draw solution under practical operating conditions (i.e., heat recovery <90%). We discuss the implications of the results for converting low-grade heat to power.« less
Dalarsson, Mariana; Tassin, Philippe
2009-04-13
We have investigated the transmission and reflection properties of structures incorporating left-handed materials with graded index of refraction. We present an exact analytical solution to Helmholtz' equation for a graded index profile changing according to a hyperbolic tangent function along the propagation direction. We derive expressions for the field intensity along the graded index structure, and we show excellent agreement between the analytical solution and the corresponding results obtained by accurate numerical simulations. Our model straightforwardly allows for arbitrary spectral dispersion.
Development of Solar Grade Silicon (SoG-Si) Feedstock by Recycling SoG-Si Wastes
DOE Office of Scientific and Technical Information (OSTI.GOV)
Lifeng Zhang; Anping Dong; Lucas Nana Wiredu Damoah
2013-01-24
Experiment results of EM separation show that the non-metallic inclusions were successfully pushed to the boundary layer of the crucible under EM force. Larger frequency and smaller current generate smaller thickness of accumulated inclusions. More detailed EM separation experiments are undergoing to investigate the factors that affect the removal efficient of inclusions from SoG-Si
Understanding Solvent Manipulation of Morphology in Bulk-Heterojunction Organic Solar Cells.
Chen, Yuxia; Zhan, Chuanlang; Yao, Jiannian
2016-10-06
Film morphology greatly influences the performance of bulk-heterojunction (BHJ)-structure-based solar cells. It is known that an interpenetrating bicontinuous network with nanoscale-separated donor and acceptor phases for charge transfer, an ordered molecular packing for exciton diffusion and charge transport, and a vertical compositionally graded structure for charge collection are prerequisites for achieving highly efficient BHJ organic solar cells (OSCs). Therefore, control of the morphology to obtain an ideal structure is a key problem. For this solution-processing BHJ system, the solvent participates fully in film processing. Its involvement is critical in modifying the nanostructure of BHJ films. In this review, we discuss the effects of solvent-related methods on the morphology of BHJ films, including selection of the casting solvent, solvent mixture, solvent vapor annealing, and solvent soaking. On the basis of a discussion on interaction strength and time between solvent and active materials, we believe that the solvent-morphology-performance relationship will be clearer and that solvent selection as a means to manipulate the morphology of BHJ films will be more rational. © 2016 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim.
The Hopf algebra structure of the h-deformed Z3-graded quantum supergroup GLh,j(1|1)
NASA Astrophysics Data System (ADS)
Yasar, Ergün
2016-07-01
In this work, we define a new proper singular g matrix to construct a Z3-graded calculus on the h-deformed quantum superplane. Using the obtained calculus, we construct a new h-deformed Z3-graded quantum supergroup and give some features of it. Finally, we build up the Hopf algebra structure of this supergroup.
Improved grading system for structural logs for log homes
D.W. Green; T.M. Gorman; J.W. Evans; J.F. Murphy
2004-01-01
Current grading standards for logs used in log home construction use visual criteria to sort logs into either âwall logsâ or structural logs (round and sawn round timbers). The conservative nature of this grading system, and the grouping of stronger and weaker species for marketing purposes, probably results in the specification of logs with larger diameter than would...
ERIC Educational Resources Information Center
Torrance, E. Paul; Phillips, Victor K.
Tasks from the Torrance Tests of Creative Thinking were administered to children in a cognitive-structured preprimary program. Results indicated that children entering as 5-year-olds showed a continuity of creative growth and excelled their controls on elaboration at the beginning of grade 1 and end of grade 2. Also, at the end of grade 2, they…
Nanotechnology, resources, and pollution control
NASA Astrophysics Data System (ADS)
Gillett, Stephen L.
1996-09-01
The separation of different kinds of atoms or molecules from each other is a fundamental technological problem. Current techniques of resource extraction, which use the ancient paradigm of the differential partitioning of elements into coexisting phases, are simple but extremely wasteful and require feedstocks (`ores') that are already anomalously enriched. This is impractical for pollution control and desalination, which require extraction of low concentrations; instead, atomistic separation, typically by differential motion through semipermeable membranes, is used. The present application of such membranes is seriously limited, however, mostly because of limitations in their fabrication by conventional bulk techniques. The capabilities of biological systems, such as vertebrate kidneys, are vastly better, largely because they are intrinsically structured at a molecular scale. Nanofabrication of semipermeable membranes promises capabilities on the order of those of biological systems, and this in turn could provide much financial incentive for the development of molecular assemblers, as well established markets exist already. Continued incentives would exist, moreover, as markets expanded with decreasing costs, leading to such further applications as remediation of polluted sites, cheap desalination, and resource extraction from very low-grade sources.
Karlberg, Anna; Berntsen, Erik Magnus; Johansen, Håkon; Myrthue, Mariane; Skjulsvik, Anne Jarstein; Reinertsen, Ingerid; Esmaeili, Morteza; Dai, Hong Yan; Xiao, Yiming; Rivaz, Hassan; Borghammer, Per; Solheim, Ole; Eikenes, Live
2017-12-01
Structural magnetic resonance imaging (MRI) and histopathologic tissue sampling are routinely performed as part of the diagnostic workup for patients with glioma. Because of the heterogeneous nature of gliomas, there is a risk of undergrading caused by histopathologic sampling errors. MRI has limitations in identifying tumor grade and type, detecting diffuse invasive growth, and separating recurrences from treatment induced changes. Positron emission tomography (PET) can provide quantitative information of cellular activity and metabolism, and may therefore complement MRI. In this report, we present the first patient with brain glioma examined with simultaneous PET/MRI using the amino acid tracer 18 F-fluciclovine ( 18 F-FACBC) for intraoperative image-guided surgery. A previously healthy 60-year old woman was admitted to the emergency care with speech difficulties and a mild left-sided hemiparesis. MRI revealed a tumor that was suggestive of glioma. Before surgery, the patient underwent a simultaneous PET/MRI examination. Fused PET/MRI, T1, FLAIR, and intraoperative three-dimensional ultrasound images were used to guide histopathologic tissue sampling and surgical resection. Navigated, image-guided histopathologic samples were compared with PET/MRI image data to assess the additional value of the PET acquisition. Histopathologic analysis showed anaplastic oligodendroglioma in the most malignant parts of the tumor, while several regions were World Health Organization (WHO) grade II. 18 F-Fluciclovine uptake was found in parts of the tumor where regional WHO grade, cell proliferation, and cell densities were highest. This finding suggests that PET/MRI with this tracer could be used to improve accuracy in histopathologic tissue sampling and grading, and possibly for guiding treatments targeting the most malignant part of extensive and eloquent gliomas. Copyright © 2017 The Author(s). Published by Elsevier Inc. All rights reserved.
NASA Astrophysics Data System (ADS)
Welch, Anita G.; Cakir, Mustafa; Peterson, Claudette M.; Ray, Chris M.
2012-04-01
Background . Studies exploring the relationship between students' achievement and the quality of the classroom learning environments have shown that there is a strong relationship between these two concepts. Learning environment instruments are constantly being revised and updated, including for use in different cultures, which requires continued validation efforts. Purpose The purpose of this study was to establish cross-cultural reliability and validity of the Technology-Rich Outcomes-Focused Learning Environment Inventory (TROFLEI) in both Turkey and the USA. Sample Approximately 980 students attending grades 9-12 in Turkey and 130 students attending grades 9-12 in the USA participated in the study. Design and method Scale reliability analyses and confirmatory factor analysis (CFA) were performed separately for Turkish and US participants for both actual and preferred responses to each scale to confirm the structure of the TROFLEI across these two distinct samples. Results Cronbach's alpha reliability coefficients, ranging from α = 0.820 to 0.931 for Turkish participants and from α = 0.778 to 0.939 for US participants, indicated that all scales have satisfactory internal consistency for both samples. Confirmatory factor analyses resulted in evidence of adequate model fit across both samples for both actual and preferred responses, with the root mean square error of approximation ranging from 0.052 to 0.057 and the comparative fit index ranging from 0.920 to 0.982. Conclusions This study provides initial evidence that the TROFLEI is valid for use in both the Turkish and US high-school populations (grades 9-12). However, the psychometric properties should be examined further with different populations, such as middle-school students (grades 6-8).
Return-to-activity after anatomical reconstruction of acute high-grade acromioclavicular separation.
Saier, T; Plath, J E; Beitzel, K; Minzlaff, P; Feucht, J M; Reuter, S; Martetschläger, F; Imhoff, Andreas B; Aboalata, M; Braun, S
2016-04-02
To evaluate return-to-activity (RtA) after anatomical reconstruction of acute high-grade acromioclavicular joint (ACJ) separation. A total of 42 patients with anatomical reconstruction of acute high-grade ACJ-separation (Rockwood Type V) were surveyed to determine RtA at a mean 31 months follow-up (f-u). Sports disciplines, intensity, level of competition, participation in overhead and/or contact sports, as well as activity scales (DASH-Sport-Module, Tegner Activity Scale) were evaluated. Functional outcome evaluation included Constant score and QuickDASH. All patients (42/42) participated in sporting activities at f-u. Neither participation in overhead/contact sports, nor level of activity declined significantly (n.s.). 62 % (n = 26) of patients reported subjective sports specific ACJ integrity to be at least the same as prior to the trauma. Sporting intensity (hours/week: 7.3 h to 5.4 h, p = .004) and level of competition (p = .02) were reduced. If activity changed, in 50 % other reasons but clinical symptoms/impairment were named for modified behavior. QuickDASH (mean 6, range 0-54, SD 11) and DASH-Sport-Module (mean 6, range 0-56, SD 13) revealed only minor disabilities at f-u. Over time Constant score improved significant to an excellent score (mean 94, range 86-100, SD 4; p < .001). Functional outcome was not correlated with RtA (n.s.). All patients participated in sporting activities after anatomical reconstruction of high-grade (Rockwood Type V) ACJ-separation. With a high functional outcome there was no significant change in activity level (Tegner) and participation in overhead and/or contact sports observed. There was no correlation between functional outcome and RtA. Limiting, there were alterations in time spent for sporting activities and level of competition observed. But in 50 % those were not related to ACJ symptoms/impairment. Unrelated to successful re-established integrity and function of the ACJ it should be considered that patients decided not return-to-activity but are very content with the procedure.
Microstructure and properties of aluminium-aluminium oxide graded composite materials
NASA Astrophysics Data System (ADS)
Kamaruzaman, F. F.; Nuruzzaman, D. M.; Ismail, N. M.; Hamedon, Z.; Iqbal, A. K. M. A.; Azhari, A.
2018-03-01
In this research works, four-layered aluminium-aluminium oxide (Al-Al2O3) graded composite materials were fabricated using powder metallurgy (PM) method. In processing, metal-ceramic graded composite materials of 0%, 10%, 20% and 30% weight percentage of ceramic concentration were prepared under 30 ton compaction load using a cylindrical die-punch set made of steel. After that, two-step pressureless sintering was carried out at sintering temperature and time 600°C and 3 hours respectively. It was observed that the sintered cylindrical specimens of 30 mm diameter were prepared successfully. The graded composite specimens were analysed and the properties such as density, microstructure and hardness were measured. It was found that after sintering process, the diameter of the graded cylindrical structure was decreased. Using both Archimedes method and rule of mixture (ROM), he density of structure was measured. The obtained results revealed that the microvickers hardness was increased as the ceramic component increases in the graded layer. Moreover, it was observed that the interface of the graded structure is clearly distinguished within the multilayer stack and the ceramic particles are almost uniformly distributed in the Al matrix.
Congenital hydronephrosis: disease or condition?
Petrovski, Mile; Simeonov, Risto; Todorovikj, Lazar; Chadikovski, Vladimir; Memeti, Shaban; Petrovska, Branka; Risteski, Toni; Cvetanovska, Vesna
2014-01-01
The aim of this paper is to address the dilemmas of the paediatric surgeon when facing an isolated, unilateral, congenital hydronephrosis and discuss the strategic options for the management of this condition. Congenital hydronephrosis, the most commonly diagnosed uropathy in children, is usually a benign and self-resolving condition. Nonobstructive hydronephrosis does not require operative treatment, while timely treatment is imperative for obstructive hydronephrosis before significant renal damage ensues. Managing congenital hydronephrosis is a challenging task. Thirty-two children with unilateral, isolated hydronephrosis and nonobstructed renography curves were followed up for 3 years. On the initial evaluation according to the grade of hydronephrosis: 22.6% were grade I, 54.8% grade II and 22.6% grade III. After 12 months of follow-up: 30% were grade I, 51 .5% grade II and 18.5% grade III, respectively. After the three-year follow-up, there were no hydroneproses greater than grade II. The mean value of the separate GFR of the affected kidney at initial evaluation was 42.83%, and 40.33% after three years. In three children the treatment was converted from conservative to surgical. Nonobstructive, congenital hydronephrosis is a benign condition not requiring any medical treatment, but aggressive observation is indicated.
Coupled structural/thermal/electromagnetic analysis/tailoring of graded composite structures
NASA Technical Reports Server (NTRS)
Mcknight, R. L.; Chen, P. C.; Dame, L. T.; Huang, H.
1992-01-01
Accomplishments are described for the first year effort of a 5-year program to develop a methodology for coupled structural/thermal/electromagnetic analysis/tailoring of graded composite structures. These accomplishments include: (1) the results of the selective literature survey; (2) 8-, 16-, and 20-noded isoparametric plate and shell elements; (3) large deformation structural analysis; (4) eigenanalysis; (5) anisotropic heat transfer analysis; and (6) anisotropic electromagnetic analysis.
Material Structure of a Graded Refractive Index Lens in Decapod Squid
NASA Astrophysics Data System (ADS)
Cai, Jing; Heiney, Paul; Sweeney, Alison
2013-03-01
Underwater vision with a camera-type eye that is simultaneously acute and sensitive requires a spherical lens with a graded distribution of refractive index. Squids have this type of lens, and our previous work has shown that its optical properties are likely achieved with radially variable densities of a single protein with multiple isoforms. Here we measure the spatial organization of this novel protein material in concentric layers of the lens and use these data to suggest possible mechanisms of self-assembly of the proteins into a graded refractive index structure. First, we performed small angle x-ray scattering (SAXS) to study how the protein is spatially organized. Then, molecular dynamic simulation allowed us to correlate structure to the possible dynamics of the system in different regions of the lens. The combination of simulation and SAXS data in this system revealed the likely protein-protein interactions, resulting material structure and its relationship to the observed and variable optical properties of this graded index system. We believe insights into the material properties of the squid lens system will inform the invention of self-assembling graded index devices.
NASA Astrophysics Data System (ADS)
Mohanty, D. P.; Chetty, T. R. K.
2014-07-01
Existence of a possible detachment zone at Elampillai region, NW margin of Kanjamalai Hills, located in the northern part of Cauvery Suture Zone (CSZ), Southern India, is reported here for the first time. Detailed structural mapping provides anatomy of the zone, which are rarely preserved in Precambrian high grade terranes. The detachment surface separates two distinct rock units of contrasting lithological and structural characters: the upper and lower units. The detachment zone is characterized by a variety of fold styles with the predominance of tight isoclinal folds with varied plunge directions, limb rotations and the hinge line variations often leading to lift-off fold like geometries and deformed sheath folds. Presence of parasitic folding and associated penetrative strains seem to be controlled by differences in mechanical stratigraphy, relative thicknesses of the competent and incompetent units, and the structural relief of the underlying basement. Our present study in conjunction with other available geological, geochemical and geochronological data from the region indicates that the structures of the detachment zone are genetically related to thrust tectonics forming a part of subduction-accretion-collision tectonic history of the Neoproterozoic Gondwana suture.
Railway/highway at-grade crossing management : an overview.
DOT National Transportation Integrated Search
2014-12-01
This report draws on data from around the United States to describe the features of a successful : railway/highway at-grade crossing management program; it emphasizes the highway/trackbed structures : and crossing surfaces. Developing a structurally ...
Code of Federal Regulations, 2014 CFR
2014-01-01
... INSPECTION Standards Official Standard Grades for Dark Air-Cured Tobacco (u.s. Types 35, 36, 37 and Foreign... separated by sorting; (b) Tobacco which contains an abnormally large quantity of foreign matter or an...
Code of Federal Regulations, 2013 CFR
2013-01-01
... INSPECTION Standards Official Standard Grades for Dark Air-Cured Tobacco (u.s. Types 35, 36, 37 and Foreign... separated by sorting; (b) Tobacco which contains an abnormally large quantity of foreign matter or an...
Code of Federal Regulations, 2012 CFR
2012-01-01
... INSPECTION Standards Official Standard Grades for Dark Air-Cured Tobacco (u.s. Types 35, 36, 37 and Foreign... separated by sorting; (b) Tobacco which contains an abnormally large quantity of foreign matter or an...
Code of Federal Regulations, 2012 CFR
2012-10-01
... pathways, crosses one or more railroad tracks at grade, and is identified by a U.S. DOT National Highway... one or more control stands. Pedestrian crossing means a separate designated sidewalk or pathway where...
Code of Federal Regulations, 2011 CFR
2011-10-01
... pathways, crosses one or more railroad tracks at grade, and is identified by a U.S. DOT National Highway... one or more control stands. Pedestrian crossing means a separate designated sidewalk or pathway where...
Alam, Md Ferdous; Haque, Asadul
2017-10-18
An accurate determination of particle-level fabric of granular soils from tomography data requires a maximum correct separation of particles. The popular marker-controlled watershed separation method is widely used to separate particles. However, the watershed method alone is not capable of producing the maximum separation of particles when subjected to boundary stresses leading to crushing of particles. In this paper, a new separation method, named as Monash Particle Separation Method (MPSM), has been introduced. The new method automatically determines the optimal contrast coefficient based on cluster evaluation framework to produce the maximum accurate separation outcomes. Finally, the particles which could not be separated by the optimal contrast coefficient were separated by integrating cuboid markers generated from the clustering by Gaussian mixture models into the routine watershed method. The MPSM was validated on a uniformly graded sand volume subjected to one-dimensional compression loading up to 32 MPa. It was demonstrated that the MPSM is capable of producing the best possible separation of particles required for the fabric analysis.
ERIC Educational Resources Information Center
Carlson, Don M.
This activity for students in grade 12 aims to increase their knowledge of the U.S. Constitution and its fundamental ideas: checks and balances, separation of powers, Bill of Rights, and the amendments. Students judge the constitutional powers of each brand of government by participating in the power game. The activity explains how the game is…
Recruiting Older Youths: Insights from a New Survey of Army Recruits
2014-01-01
remaining in the service at the time to be considered for promotion 8. the unconditional probability of achieving the military grade of E-5 at four years...of service 9. the unconditional probability of achieving the military grade of E-5 at six years of ser- vice. We examined both the total effects of...career outcomes for Army enlist- ees. These effects are computed from separate linear probability regression models that include only dummy variables
Optical Enhancement in Optoelectronic Devices Using Refractive Index Grading Layers.
Lee, Illhwan; Park, Jae Yong; Gim, Seungo; Kim, Kisoo; Cho, Sang-Hwan; Choi, Chung Sock; Song, Seung-Yong; Lee, Jong-Lam
2016-02-10
We enhanced the optical transmittance of a multilayer barrier film by inserting a refractive index grading layer (RIGL). The result indicates that the Fresnel reflection, induced by the difference of refractive indices between Si(x)N(y) and SiO2, is reduced by the RIGL. To eliminate the Fresnel reflection while maintaining high transmittance, the optimized design of grading structures with the RIGL was conducted using an optical simulator. With the RIGL, we achieved averaged transmittance in the visible wavelength region by 89.6%. It is found that the optimized grading structure inserting the multilayer barrier film has a higher optical transmittance (89.6%) in the visible region than that of a no grading sample (82.6%). Furthermore, luminance is enhanced by 14.5% (from 10,190 to 11,670 cd m(-2) at 30 mA cm(-2)) when the grading structure is applied to organic light-emitting diodes. Finally, the results offer new opportunities in development of multilayer barrier films, which assist industrialization of very cost-effective flexible organic electronic devices.
NASA Astrophysics Data System (ADS)
Calderón Martín, Antonio Jesús; Martín González, Cándido; Ndoye, Daouda
2018-01-01
We introduce the notion of groupoid grading, give some nontrivial examples and prove that groupoid gradings on simple commutative or anti-commutative algebras are necessarily group gradings. We also take advantage of the structure of groupoids to prove some results about groupoid gradings and certain coarsenings of these which turn out to be group gradings. We also study set gradings on arbitrary algebras, by characterizing their homogeneous semisimplicity and their homogeneous simplicity in terms of a property satisfied by the supports of the gradings, and also relate set gradings with groupoid gradings via coarsenings. Finally we study a class of set gradings on Mn(C) , the orthogonal gradings, and show that all of them which are fine are necessarily groupoid gradings.
Mousavi, Hojjat Seyed; Monga, Vishal; Rao, Ganesh; Rao, Arvind U K
2015-01-01
Histopathological images have rich structural information, are multi-channel in nature and contain meaningful pathological information at various scales. Sophisticated image analysis tools that can automatically extract discriminative information from the histopathology image slides for diagnosis remain an area of significant research activity. In this work, we focus on automated brain cancer grading, specifically glioma grading. Grading of a glioma is a highly important problem in pathology and is largely done manually by medical experts based on an examination of pathology slides (images). To complement the efforts of clinicians engaged in brain cancer diagnosis, we develop novel image processing algorithms and systems to automatically grade glioma tumor into two categories: Low-grade glioma (LGG) and high-grade glioma (HGG) which represent a more advanced stage of the disease. We propose novel image processing algorithms based on spatial domain analysis for glioma tumor grading that will complement the clinical interpretation of the tissue. The image processing techniques are developed in close collaboration with medical experts to mimic the visual cues that a clinician looks for in judging of the grade of the disease. Specifically, two algorithmic techniques are developed: (1) A cell segmentation and cell-count profile creation for identification of Pseudopalisading Necrosis, and (2) a customized operation of spatial and morphological filters to accurately identify microvascular proliferation (MVP). In both techniques, a hierarchical decision is made via a decision tree mechanism. If either Pseudopalisading Necrosis or MVP is found present in any part of the histopathology slide, the whole slide is identified as HGG, which is consistent with World Health Organization guidelines. Experimental results on the Cancer Genome Atlas database are presented in the form of: (1) Successful detection rates of pseudopalisading necrosis and MVP regions, (2) overall classification accuracy into LGG and HGG categories, and (3) receiver operating characteristic curves which can facilitate a desirable trade-off between HGG detection and false-alarm rates. The proposed method demonstrates fairly high accuracy and compares favorably against best-known alternatives such as the state-of-the-art WND-CHARM feature set provided by NIH combined with powerful support vector machine classifier. Our results reveal that the proposed method can be beneficial to a clinician in effectively separating histopathology slides into LGG and HGG categories, particularly where the analysis of a large number of slides is needed. Our work also reveals that MVP regions are much harder to detect than Pseudopalisading Necrosis and increasing accuracy of automated image processing for MVP detection emerges as a significant future research direction.
NASA Astrophysics Data System (ADS)
Gulyuz, Nilay; Shipton, Zoe; Gulyuz, Erhan; Lord, Richard; Kaymakci, Nuretdin; Kuscu, İlkay
2017-04-01
Vein-hosted gold deposits contribute a large part to the global gold production. Discovery of these deposits mainly include drilling of hundreds of holes, collecting thousands of soil and rock samples and some geophysical surveys which are expensive and time consuming. Understanding the structures hosting the veins and the variations in gold concentrations within the veins is crucial to constrain a more economic exploration program. The main aim of this study is to investigate the gold grade distribution in the mineralized quartz veins of a well exposed epithermal gold deposit hosted by Paleozoic schist and Eocene quartz-feldspar-hornblende porphyry in Lapseki, NW Turkey. We have constructed 3D architecture of the vein surfaces by mapping their outcrop geometries using a highly sensitive Trimble GPS, collecting detailed field data, well-logs and geochemistry data from 396 drill holes (255 diamond cut and 141 reverse circulation holes). Modelling was performed in MOVE Structural Modelling and Analysis software granted by Midland Valley's Academic Software Initiative, and GIS application softwares Global Mapper and Esri-ArcGIS. We envisaged that while fluid entering the conduit ascents, a sudden thickness increase in the conduit would lead to a drop in the fluid pressure causing boiling (the most dominant gold precipitation mechanism) and associated gold precipitation. Regression analysis was performed between the orthogonal thickness values and gold grades of each vein, and statistical analyses were performed to see if the gold is concentrated at specific structural positions along dip. Gold grades in the alteration zones were compared to those in the adjacent veins to understand the degree of mineralization in alteration zones. A possible correlation was also examined between the host rock type and the gold grades in the veins. These studies indicated that gold grades are elevated in the adjacent alteration zones where high gold grades exist in the veins. Schist-hosted veins host the majority of gold mineralization (94.39%). While there is almost no correlation between the true vein thickness and the gold grade, 77.65% of high gold grades are located where the veins bend along dip. These results suggest that multiple gold precipitation mechanisms may have been active and boiling mechanism responsible for gold precipitation along the structural pathways was more effective than possible fluid-rock interaction or throttling mechanisms which will precipitate gold at adjacent alteration zones around the pathways at Kestanelik. In addition, specific structural locations such as vein bends are favorable for gold precipitation. This study emphasizes that structural architecture of the veins is one of the key controls on the location of high gold grades. In addition, adding structural data collection and mapping specific structural locations such as bends to the exploration program could permit the key locations of high gold grade to be identified faster, and to focus further drilling and assays.
The evolution of floral biology in basal angiosperms
Endress, Peter K.
2010-01-01
In basal angiosperms (including ANITA grade, magnoliids, Choranthaceae, Ceratophyllaceae) almost all bisexual flowers are dichogamous (with male and female functions more or less separated in time), and nearly 100 per cent of those are protogynous (with female function before male function). Movements of floral parts and differential early abscission of stamens in the male phase are variously associated with protogyny. Evolution of synchronous dichogamy based on the day/night rhythm and anthesis lasting 2 days is common. In a few clades in Magnoliales and Laurales heterodichogamy has also evolved. Beetles, flies and thrips are the major pollinators, with various degrees of specialization up to large beetles and special flies in some large-flowered Nymphaeaceae, Magnoliaceae, Annonaceae and Aristolochiaceae. Unusual structural specializations are involved in floral biological adaptations (calyptras, inner staminodes, synandria and food bodies, and secretory structures on tepals, stamens and staminodes). Numerous specializations that are common in monocots and eudicots are absent in basal angiosperms. Several families are poorly known in their floral biology. PMID:20047868
Coupled structural/thermal/electromagnetic analysis/tailoring of graded composite structures
NASA Technical Reports Server (NTRS)
Mcknight, R. L.; Huang, H.; Hartle, M.
1992-01-01
Accomplishments are described for the fourth years effort of a 5-year program to develop a methodology for coupled structural/thermal/electromagnetic analysis/tailoring of graded component structures. These accomplishments include: (1) demonstration of coupled solution capability; (2) alternate CSTEM electromagnetic technology; (3) CSTEM acoustic capability; (4) CSTEM tailoring; (5) CSTEM composite micromechanics using ICAN; and (6) multiple layer elements in CSTEM.
Evaluation of Grade 120 Granulated Ground blast Furnace Slag.
DOT National Transportation Integrated Search
1999-06-01
This study evaluates Grade 120 Granulated Ground Blast Furnace Slag (GGBFS) and its effect on the properties of hydraulic cement concretes used in structural and pavement construction. Several mix designs, structural and pavement, were used for this ...
Control of volume resistivity in inorganic-organic separators. [for alkaline batteries
NASA Technical Reports Server (NTRS)
Sheibley, D. W.; Manzo, M. A.
1980-01-01
Control of resistivity in NASA inorganic-organic separators is achieved by incorporating small percentages of high surface area, fine-particle silica with other ingredients in the separator coating. The volume resistivity appears to be predictable from coating composition, that is, from the surface area of filler particles in the coating. The approach has been applied to two polymer-'plasticizer'-filler coating systems, where the filler content of each is below the generally acknowledged critical pigment volume concentration of the coating. Application of these coating systems to 0.0254 cm thick (10 mil) fuel-cell grade asbestos sheet produces inexpensive, flexible, microporous separators that perform at least as well as the original inorganic-organic concept, the Astropower separator.
Castrillo, J M; Montalban, C; Obeso, G; Piris, M A; Rivas, M C
1992-01-01
Clinico-pathological features of 56 patients with primary gastric lymphoma were evaluated retrospectively. All cases were regraded according to a classification of Isaacson et al into high grade and low grade B-cell mucosa associated lymphoid tissue lymphoma. A third group of mixed grade was recognised in 11 patients with low grade who also had occasional areas of high grade. Low grade and mixed grade patients had a 100% actuarial survival at 156 months, which was significantly better (p < 0.01) than that of 52% for patients with high grade disease. Different treatment methods--surgery, chemotherapy, or a combination of both--did not significantly affect survival. Low grade tumours occurred mainly in men with a history of several years, and who presented with non-specific gastric symptoms without remarkable exploratory or laboratory findings: most patients were in stage IE-IIE and achieved remission and cure. High grade can have a shorter history, systemic symptoms, abnormal exploratory and laboratory findings, gastric tumour masses, stage IV disease, and a worse outcome. The only significant prognostic factors for survival were the type of lymphoma and stage IV disease. These findings support the Isaacson classification system which separates two extreme groups of gastric lymphomas with different morphology, behaviour, and outcome. The presence of limited areas of high grade in a specimen showing low grade does not change the outcome but suggests that primary gastric lymphoma forms a continuum between these extreme types. PMID:1446850
Increased Course Structure Improves Performance in Introductory Biology
Freeman, Scott; Haak, David; Wenderoth, Mary Pat
2011-01-01
We tested the hypothesis that highly structured course designs, which implement reading quizzes and/or extensive in-class active-learning activities and weekly practice exams, can lower failure rates in an introductory biology course for majors, compared with low-structure course designs that are based on lecturing and a few high-risk assessments. We controlled for 1) instructor effects by analyzing data from quarters when the same instructor taught the course, 2) exam equivalence with new assessments called the Weighted Bloom's Index and Predicted Exam Score, and 3) student equivalence using a regression-based Predicted Grade. We also tested the hypothesis that points from reading quizzes, clicker questions, and other “practice” assessments in highly structured courses inflate grades and confound comparisons with low-structure course designs. We found no evidence that points from active-learning exercises inflate grades or reduce the impact of exams on final grades. When we controlled for variation in student ability, failure rates were lower in a moderately structured course design and were dramatically lower in a highly structured course design. This result supports the hypothesis that active-learning exercises can make students more skilled learners and help bridge the gap between poorly prepared students and their better-prepared peers. PMID:21633066
Increased course structure improves performance in introductory biology.
Freeman, Scott; Haak, David; Wenderoth, Mary Pat
2011-01-01
We tested the hypothesis that highly structured course designs, which implement reading quizzes and/or extensive in-class active-learning activities and weekly practice exams, can lower failure rates in an introductory biology course for majors, compared with low-structure course designs that are based on lecturing and a few high-risk assessments. We controlled for 1) instructor effects by analyzing data from quarters when the same instructor taught the course, 2) exam equivalence with new assessments called the Weighted Bloom's Index and Predicted Exam Score, and 3) student equivalence using a regression-based Predicted Grade. We also tested the hypothesis that points from reading quizzes, clicker questions, and other "practice" assessments in highly structured courses inflate grades and confound comparisons with low-structure course designs. We found no evidence that points from active-learning exercises inflate grades or reduce the impact of exams on final grades. When we controlled for variation in student ability, failure rates were lower in a moderately structured course design and were dramatically lower in a highly structured course design. This result supports the hypothesis that active-learning exercises can make students more skilled learners and help bridge the gap between poorly prepared students and their better-prepared peers.
Bioinspired design of dental multilayers.
Huang, M; Wang, R; Thompson, V; Rekow, D; Soboyejo, W O
2007-01-01
This paper considers the use of bioinspired functionally graded structures in the design of dental multi-layers that are more resistant to sub-surface crack nucleation. Unlike existing dental crown restorations that give rise to high stress concentration, the functionally graded layers (between crown materials and the joins that attach them to dentin) are shown to promote significant reductions in stress and improvements in the critical crack size. Special inspiration is drawn from the low stress concentrations associated with the graded distributions in the dentin-enamel-junction (DEJ). The implications of such functionally graded structures are also discussed for the design of dental restorations.
Zhou, Changchun; Deng, Congying; Chen, Xuening; Zhao, Xiufen; Chen, Ying; Fan, Yujiang; Zhang, Xingdong
2015-08-01
Functionally graded materials (FGM) open the promising approach for bone tissue repair. In this study, a novel functionally graded hydroxyapatite (HA) bioceramic with micrograin and nanograin structure was fabricated. Its mechanical properties were tailored by composition of micrograin and nanograin. The dynamic mechanical analysis (DMA) indicated that the graded HA ceramics had similar mechanical property compared to natural bones. Their cytocompatibility was evaluated via fluorescent microscopy and MTT colorimetric assay. The viability and proliferation of rabbit bone marrow mesenchymal stem cells (BMSCs) on ceramics indicated that this functionally graded HA ceramic had better cytocompatibility than conventional HA ceramic. This study demonstrated that functionally graded HA ceramics create suitable structures to satisfy both the mechanical and biological requirements of bone tissues. Copyright © 2015 Elsevier Ltd. All rights reserved.
NASA Astrophysics Data System (ADS)
Ghannadpour, Seyyed Saeed; Hezarkhani, Ardeshir
2016-03-01
The U-statistic method is one of the most important structural methods to separate the anomaly from the background. It considers the location of samples and carries out the statistical analysis of the data without judging from a geochemical point of view and tries to separate subpopulations and determine anomalous areas. In the present study, to use U-statistic method in three-dimensional (3D) condition, U-statistic is applied on the grade of two ideal test examples, by considering sample Z values (elevation). So far, this is the first time that this method has been applied on a 3D condition. To evaluate the performance of 3D U-statistic method and in order to compare U-statistic with one non-structural method, the method of threshold assessment based on median and standard deviation (MSD method) is applied on the two example tests. Results show that the samples indicated by U-statistic method as anomalous are more regular and involve less dispersion than those indicated by the MSD method. So that, according to the location of anomalous samples, denser areas of them can be determined as promising zones. Moreover, results show that at a threshold of U = 0, the total error of misclassification for U-statistic method is much smaller than the total error of criteria of bar {x}+n× s. Finally, 3D model of two test examples for separating anomaly from background using 3D U-statistic method is provided. The source code for a software program, which was developed in the MATLAB programming language in order to perform the calculations of the 3D U-spatial statistic method, is additionally provided. This software is compatible with all the geochemical varieties and can be used in similar exploration projects.
Reed, Darcy A; Shanafelt, Tait D; Satele, Daniel W; Power, David V; Eacker, Anne; Harper, William; Moutier, Christine; Durning, Steven; Massie, F Stanford; Thomas, Matthew R; Sloan, Jeff A; Dyrbye, Liselotte N
2011-11-01
Psychological distress is common among medical students. Curriculum structure and grading scales are modifiable learning environment factors that may influence student well-being. The authors sought to examine relationships among curriculum structures, grading scales, and student well-being. The authors surveyed 2,056 first- and second-year medical students at seven U.S. medical schools in 2007. They used the Perceived Stress Scale, Maslach Burnout Inventory, and Medical Outcomes Study Short Form (SF-8) to measure stress, burnout, and quality of life, respectively. They measured curriculum structure using hours spent in didactic, clinical, and testing experiences. Grading scales were categorized as two categories (pass/fail) versus three or more categories (e.g., honors/pass/fail). Of the 2,056 students, 1,192 (58%) responded. In multivariate analyses, students in schools using grading scales with three or more categories had higher levels of stress (beta 2.65; 95% CI 1.54-3.76, P<.0001), emotional exhaustion (beta 5.35; 95% CI 3.34-7.37, P<.0001), and depersonalization (beta 1.36; 95% CI 0.53-2.19, P=.001) and were more likely to have burnout (OR 2.17; 95% CI 1.41-3.35, P=.0005) and to have seriously considered dropping out of school (OR 2.24; 95% CI 1.54-3.27, P<.0001) compared with students in schools using pass/fail grading. There were no relationships between time spent in didactic and clinical experiences and well-being. How students are evaluated has a greater impact than other aspects of curriculum structure on their well-being. Curricular reform intended to enhance student well-being should incorporate pass/fail grading.
Park, Daeun; Tsukayama, Eli; Goodwin, Geoffrey P.; Patrick, Sarah; Duckworth, Angela L.
2017-01-01
Other than cognitive ability, what competencies should schools promote in children? How are they organized, and to what extent do they predict consequential outcomes? Separate theoretical traditions have suggested interpersonal, intrapersonal, and intellectual dimensions, reflecting how children relate to other people, manage their own goals and impulses, and engage with ideas, respectively. However, very little work has examined character empirically. In the current investigation, we partnered with middle schools that had previously identified character strengths relevant in their communities. Across three longitudinal, prospective studies, we examined the factor structure of character, associations with intelligence and Big Five personality traits, and predictive validity for consequential outcomes like peer relations, class participation, and report card grades. In Study 1, teachers rated their students on behaviors exemplifying character strengths as they played out in students’ daily lives. Exploratory factor analyses yielded a three-factor structure consisting of interpersonal (interpersonal self-control, gratitude, social intelligence), intellectual (zest, curiosity), and intrapersonal (academic self-control, grit) factors of character. In Study 2, children rated their own behavior and completed a test of cognitive ability. Confirmatory factor analyses supported the same three-factor structure, and these factors were only weakly associated with cognitive ability. In Study 3, teachers provided character ratings; in parallel, students completed measures of character as well as Big Five personality factors. As expected, intellectual, interpersonal, and intrapersonal character factors related to Big Five openness to experience, agreeableness, and conscientiousness, respectively. Across studies, positive peer relations were most consistently predicted by interpersonal character, class participation by intellectual character, and report card grades by intrapersonal character. Collectively, our findings support a tripartite taxonomy of character in the school context. PMID:29051684
Park, Daeun; Tsukayama, Eli; Goodwin, Geoffrey P; Patrick, Sarah; Duckworth, Angela L
2017-01-01
Other than cognitive ability, what competencies should schools promote in children? How are they organized, and to what extent do they predict consequential outcomes? Separate theoretical traditions have suggested interpersonal, intrapersonal, and intellectual dimensions, reflecting how children relate to other people, manage their own goals and impulses, and engage with ideas, respectively. However, very little work has examined character empirically. In the current investigation, we partnered with middle schools that had previously identified character strengths relevant in their communities. Across three longitudinal, prospective studies, we examined the factor structure of character, associations with intelligence and Big Five personality traits, and predictive validity for consequential outcomes like peer relations, class participation, and report card grades. In Study 1, teachers rated their students on behaviors exemplifying character strengths as they played out in students' daily lives. Exploratory factor analyses yielded a three-factor structure consisting of interpersonal (interpersonal self-control, gratitude, social intelligence), intellectual (zest, curiosity), and intrapersonal (academic self-control, grit) factors of character. In Study 2, children rated their own behavior and completed a test of cognitive ability. Confirmatory factor analyses supported the same three-factor structure, and these factors were only weakly associated with cognitive ability. In Study 3, teachers provided character ratings; in parallel, students completed measures of character as well as Big Five personality factors. As expected, intellectual, interpersonal, and intrapersonal character factors related to Big Five openness to experience, agreeableness, and conscientiousness, respectively. Across studies, positive peer relations were most consistently predicted by interpersonal character, class participation by intellectual character, and report card grades by intrapersonal character. Collectively, our findings support a tripartite taxonomy of character in the school context.
ERIC Educational Resources Information Center
Liu, Duo; McBride-Chang, Catherine
2014-01-01
In the present study, we explored the characteristics of morphological structure processing during word recognition among third grade Chinese children and its possible relationship with Chinese character reading. By using the modified priming lexical decision paradigm, a significant morphological structure priming effect was found in the subject…
Farrell, Albert D; Goncy, Elizabeth A; Sullivan, Terri N; Thompson, Erin L
2018-06-01
This study examined trajectories of victimization and problem behaviors within and across three grades of middle school. Participants were 2,166 adolescents from three urban middle schools in the United States who completed measures of victimization, physical and relational aggression, substance use, and delinquent behavior. Latent curve analyses modeled changes in each construct across 12 waves collected every 3 months. In each case, the best-fitting model required separate linear slopes to represent changes within each grade and a factor representing decreases in the summers. Positive cross-construct correlations were found for intercepts, linear slopes, and measures within waves. The findings suggest strong associations among victimization and problem behaviors, and individual differences in their patterns of change both within and across grades. © 2017 Society for Research on Adolescence.
ERIC Educational Resources Information Center
Reutzel, D. Ray; Jones, Cindy D.; Clark, Sarah K.; Kumar, Tamara
2016-01-01
There has been no research reported about if or how well primary grade teachers can identify information text structures in children's authentic informational texts. The ability to do so accurately and reliably is a prerequisite for teachers to be able to teach students how to recognize and use text structures to assist them in comprehending…
Yang, Nuo; Hu, Shiqian; Ma, Dengke; Lu, Tingyu; Li, Baowen
2015-01-01
In this Paper, we investigate numerically and analytically the thermal conductivity of nanoscale graphene disks (NGDs), and discussed the possibility to realize functionally graded material (FGM) with only one material, NGDs. Different from previous studies on divergence/non-diffusive of thermal conductivity in nano-structures with different size, we found a novel non-homogeneous (graded) thermal conductivity along the radius direction in a single nano-disk structure. We found that, instead of a constant value, the NGD has a graded thermal conductivity along the radius direction. That is, Fourier’s law of heat conduction is not valid in two dimensional graphene disk structures Moreover, we show the dependent of NGDs’ thermal conductivity on radius and temperature. Our study might inspire experimentalists to develop NGD based versatile FGMs, improve understanding of the heat removal of hot spots on chips, and enhance thermoelectric energy conversion efficiency by two dimensional disk with a graded thermal conductivity. PMID:26443206
Yang, Nuo; Hu, Shiqian; Ma, Dengke; Lu, Tingyu; Li, Baowen
2015-10-07
In this Paper, we investigate numerically and analytically the thermal conductivity of nanoscale graphene disks (NGDs), and discussed the possibility to realize functionally graded material (FGM) with only one material, NGDs. Different from previous studies on divergence/non-diffusive of thermal conductivity in nano-structures with different size, we found a novel non-homogeneous (graded) thermal conductivity along the radius direction in a single nano-disk structure. We found that, instead of a constant value, the NGD has a graded thermal conductivity along the radius direction. That is, Fourier's law of heat conduction is not valid in two dimensional graphene disk structures Moreover, we show the dependent of NGDs' thermal conductivity on radius and temperature. Our study might inspire experimentalists to develop NGD based versatile FGMs, improve understanding of the heat removal of hot spots on chips, and enhance thermoelectric energy conversion efficiency by two dimensional disk with a graded thermal conductivity.
Warrants for pedestrian over and underpasses
DOT National Transportation Integrated Search
1984-07-01
The purpose of this research was to develop warrants for pedestrian over and underpasses or grade separated pedestrian crossings (GSPCs). Currently there are no established nationally acceptable warrants to serve as standards in deciding whether or n...
Flip Chip Bonding of 68 x 68 MWIR LED Arrays
2009-01-01
transmission of IR light through GaSb material varies between 5%–30% and depends on the type of substrate dopants (n- or p-type). Hence, for bottom...emission regions (8.9/16 monolayer’s (ml) InAs/GaSb) separated by (n InAs/GaSb super lattice grade)/(p+ GaSb) tunnel junctions. Graded super lattices were...flip chip bonding process. Besides four corner LED test pads, there are 296 bonding pads in the CMOS driver to bias each LED pixel independently. The
Grunewald, J P; Röhl, F W; Kirches, E; Dietzmann, K
1998-02-01
Many studies dealing with extracranial cancer showed a strong correlation of DNA ploidy to a poor clinical outcome, recurrence, or malignancy. In brain tumors, analysis of DNA content did not always provided significant diagnostic information. In this study, DNA density and karyometric parameters of 50 meningiomas (26 Grade I, 10 Grade II, 14 Grade III) were quantitatively evaluated by digital cell image analyses of Feulgen-stained nuclei. In particular, the densitometric parameter SEXT, which describes nuclear DNA content, as well as the morphometric values LENG (a computer-assisted measurement of nuclear circumference), AREA (a computer-assisted measurement of nuclear area), FCON (a parameter that describes nuclear roundness), and CONC (a describing nuclear contour), evaluated with the software IMAGE C, were correlated to World Health Organization (WHO) grading using univariate and multivariate methods. AREA and LENG values showed significant differences between tumors of Grades I and III. FCON values were unable to distinguish WHO Grade III from Grade I/II but were useful in clearly separating Grade II from Grade I tumors. CONC values detected differences between WHO Grades II and I/III tumors but not between the latter. SEXT values clearly distinguished Grade III from Grade I/II tumors. The 1c, 2c, 2.5c, and 5c exceeding rates showed no predictive values. Only the 6c exceeding rate showed a significant difference between Grades I and III. These results outline the characteristic features of the atypical (Grade II) meningiomas, which make them a recognizable tumor entity distinct from benign and anaplastic meningiomas. The combination of DNA densitometric and morphometric findings seems to be a powerful addition to the histopathologic classification of meningiomas, as suggested by the WHO.
Downes, Michelle R; Gibson, Eli; Sykes, Jenna; Haider, Masoom; van der Kwast, Theo H; Ward, Aaron
2016-11-01
The study aimed to determine the relationship between T2-weighted magnetic resonance imaging (MRI) signal and histologic sub-patterns in prostate cancer areas with different Gleason grades. MR images of prostates (n = 25) were obtained prior to radical prostatectomy. These were processed as whole-mount specimens with tumors and the peripheral zone was annotated digitally by two pathologists. Gleason grade 3 was the most prevalent grade and was subdivided into packed, intermediate, and sparse based on gland-to-stroma ratio. Large cribriform, intraductal carcinoma, and small cribriform glands (grade 4 group) were separately annotated but grouped together for statistical analysis. The log MRI signal intensity for each contoured region (n = 809) was measured, and pairwise comparisons were performed using the open-source software R version 3.0.1. Packed grade 3 sub-pattern has a significantly lower MRI intensity than the grade 4 group (P < 0.00001). Sparse grade 3 has a significantly higher MRI intensity than the packed grade 3 sub-pattern (P < 0.0001). No significant difference in MRI intensity was observed between the Gleason grade 4 group and the sparse sub-pattern grade 3 group (P = 0.54). In multivariable analysis adjusting for peripheral zone, the P values maintained significance (packed grade 3 group vs grade 4 group, P < 0.001; and sparse grade 3 sub-pattern vs packed grade 3 sub-pattern, P < 0.001). This study demonstrated that T2-weighted MRI signal is dependent on histologic sub-patterns within Gleason grades 3 and 4 cancers, which may have implications for directed biopsy sampling and patient management. Copyright © 2016 The Association of University Radiologists. Published by Elsevier Inc. All rights reserved.
Abdul-Hamid, Nur Ashikin; Mediani, Ahmed; Maulidiani, M; Abas, Faridah; Ismail, Intan Safinar; Shaari, Khozirah; Lajis, Nordin H
2016-10-28
This study was aimed at examining the variations in the metabolite constituents of the different Ajwa grades and farm origins. It is also targeted at establishing the correlations between the metabolite contents and the grades and further to the nitric oxide (NO) inhibitory activity. Identification of the metabolites was generated using ¹H-NMR spectroscopy metabolomics analyses utilizing multivariate methods. The NO inhibitory activity was determined using a Griess assay. Multivariate data analysis, for both supervised and unsupervised approaches, showed clusters among different grades of Ajwa dates obtained from different farms. The compounds that contribute towards the observed separation between Ajwa samples were suggested to be phenolic compounds, ascorbic acid and phenylalanine. Ajwa dates were shown to have different metabolite compositions and exhibited a wide range of NO inhibitory activity. It is also revealed that Ajwa Grade 1 from the al-Aliah farm exhibited more than 90% NO inhibitory activity compared to the other grades and origins. Phenolic compounds were among the compounds that played a role towards the greater capacity of NO inhibitory activity shown by Ajwa Grade 1 from the al-Aliah farm.
Thrall, Michael J
2016-04-01
The Lower Anogenital Squamous Terminology (LAST) group has recommended that cervical intraepithelial neoplasia (CIN) terminology be replaced by squamous intraepithelial lesion (SIL) terminology, with p16 immunohistochemistry used to separate lesions formerly diagnosed as CIN grade 2 into high-grade SILs (HSILs) and low-grade SILs. This study investigated the impact of these changes on the frequency of p16 testing and the diagnosis of high-grade lesions. Pathology reports for all cervical biopsy specimens in the 1 year before and after the introduction of LAST recommendations (July 2011 to June 2013) were examined. Before and after the implementation of LAST, 365 (15.4%) of 2,376 cases were diagnosed as high grade (CIN 2/3) vs 486 (17.6%) of 2,761 cases diagnosed as HSILs (P = .0343), and p16 was performed 79 (3.3%) times vs 383 (13.9%) times (P < .0001). Immunohistochemistry for p16 increased dramatically as a result of LAST recommendations, and high-grade diagnoses increased. © American Society for Clinical Pathology, 2016. All rights reserved. For permissions, please e-mail: journals.permissions@oup.com.
Electrostatic Separator for Beneficiation of Lunar Soil
NASA Technical Reports Server (NTRS)
Quinn, Jacqueline; Arens, Ellen; Trigwell, Steve; Captain, James
2010-01-01
A charge separator has been constructed for use in a lunar environment that will allow for separation of minerals from lunar soil. In the present experiments, whole lunar dust as received was used. The approach taken here was that beneficiation of ores into an industrial feedstock grade may be more efficient. Refinement or enrichment of specific minerals in the soil before it is chemically processed may be more desirable as it would reduce the size and energy requirements necessary to produce the virgin material, and it may significantly reduce the process complexity. The principle is that minerals of different composition and work function will charge differently when tribocharged against different materials, and hence be separated in an electric field.
Recovery of magnetite from low grade banded magnetite quartzite (BMQ) ore
NASA Astrophysics Data System (ADS)
Tripathy, Alok; Bagchi, Subhankar; Rao, Danda Srinivas; Nayak, Bijaya Ketana; Rout, Prashanta Kumar; Biswal, Surendra Kumar
2018-04-01
There has been a steady increase of iron ore demand in the last few decades. This growing demand could be countered by use of low grade iron ore after beneficiation. Banded iron formations (BIF) are one of the resources of such low grade iron ores. Banded magnetite quartzite (BMQ) is one such BIF and a source of iron phase mineral in the form of magnetite. In the present study a low grade BMQ ore containing around 25.47% Fe was beneficiated for recovery of magnetite. XRD study shows that quartz, magnetite, hematite, and goethite are the major minerals phases present in the low grade BMQ sample. Unit operations such as crushing, scrubbing, grinding, and magnetic separations were used for recovering magnetite. Based on the large scale beneficiation studies the process flowsheet has been developed for enrichment of magnetite. It was found that with the help of developed process flowsheet it is possible to enrich Fe value up to 65.14% in the concentrate with a yield of 24.59%.
ERIC Educational Resources Information Center
Lane, Dallas Marie
2017-01-01
The purpose of this study was to determine if there is a relationship between the classroom organizational structure and MCT2 test scores of fifth-grade math students. The researcher gained insight regarding which structure teachers believe is most beneficial to them and students, and whether or not their belief of classroom organizational…
2006-12-01
Welsch, and E.W. Collings, eds. Materials Properties Handbook: Titanium Alloys . ASM International: 1994. p. 179 Davis, Joseph, ed. Properties ...AN EXPLORATION OF SEVERAL STRUCTURAL MEASUREMENT TECHNIQUES FOR USAGE WITH FUNCTIONALLY GRADED...of Defense, or the United States Government. AFIT/GAE/ENY/07-D03 AN EXPLORATION OF SEVERAL STRUCTURAL MEASUREMENT TECHNIQUES FOR USAGE WITH
Classification of pulmonary neuroendocrine tumors: new insights.
Pelosi, Giuseppe; Sonzogni, Angelica; Harari, Sergio; Albini, Adriana; Bresaola, Enrica; Marchiò, Caterina; Massa, Federica; Righi, Luisella; Gatti, Gaia; Papanikolaou, Nikolaos; Vijayvergia, Namrata; Calabrese, Fiorella; Papotti, Mauro
2017-10-01
Neuroendocrine tumors of the lung (Lu-NETs) embrace a heterogeneous family of neoplasms classified into four histological variants, namely typical carcinoid (TC), atypical carcinoid (AC), large cell neuroendocrine carcinoma (LCNEC) and small cell lung carcinoma (SCLC). Defining criteria on resection specimens include mitotic count in 2 mm 2 and the presence or absence of necrosis, alongside a constellation of cytological and histological traits including cell size and shape, nuclear features and overall architecture. Clinically, TC are low-grade malignant tumors, AC intermediate-grade malignant tumors and SCLC/LCNEC high-grade malignant full-blown carcinomas with no significant differences in survival between them. Homologous tumors arise in the thymus that occasionally have some difficulties in differentiating from the lung counterparts when presented with large unresectable or metastatic lesions. Immunohistochemistry (IHC) helps refine NE diagnosis at various anatomical sites, particularly on small-sized tissue material, in which only TC and small cell carcinoma categories can be recognized easily on hematoxylin & eosin stain, while AC and LCNEC can only be suggested on such material. The Ki-67 labeling index effectively separates carcinoids from small cell carcinoma and may prove useful for the clinical management of a metastatic disease to help the therapeutic decision-making process. Although carcinoids and high-grade neuroendocrine carcinomas in the lung and elsewhere make up separate tumor categories on molecular grounds, emerging data supports the concept of secondary high-grade NETs arising in the preexisting carcinoids, whose clinical and biological relevance will have to be placed into the proper context for the optimal management of these patients. In this review, we will discuss the selected, recent literature with a focus on current issues regarding Lu-NET nosology, i.e., classification, derivation and tumor evolution.
55. Gradeseparation bridge over the Chicago, Burlington and Quincy Railroad, ...
55. Grade-separation bridge over the Chicago, Burlington and Quincy Railroad, looking southwest from north approach from Wisconsin State Highway 35 - Bridge No. 5930, Spanning Mississippi River at Trunk Highway 43, Winona, Winona County, MN
57. Gradeseparation bridge over the Chicago, Burlington and Quincy Railroad, ...
57. Grade-separation bridge over the Chicago, Burlington and Quincy Railroad, looking south from north approach from Wisconsin State Highway 35 - Bridge No. 5930, Spanning Mississippi River at Trunk Highway 43, Winona, Winona County, MN
Victimization from Mental and Physical Bullying and Substance Use in Early Adolescence
Tharp-Taylor, Shannah; Haviland, Amelia; D'Amico, Elizabeth J.
2009-01-01
Logistic regression analyses were used to assess the association between victimization from mental and physical bullying and use of alcohol, cigarettes, marijuana, and inhalants among middle school students. Self-report data were analyzed from 926 ethnically diverse sixth through eighth grade students (43% white, 26% Latino, 7% Asian American/Pacific Islander, 3% African American, 14% mixed ethnic origin, and 5% “other”) ages 11 – 14 years from southern California. Substance use was collected at two time points (fall 2004 and spring 2005) during an academic year. Models were run for each substance separately. Results supported an association between victimization from bullying and substance use. Youths who experienced each type of bullying (mental or physical) separately or in combination were more likely to report use of each substance in spring 2005. This finding held after controlling for gender, grade level, ethnicity and substance use in fall 2004. PMID:19398162
NASA Astrophysics Data System (ADS)
Khoryani, Zahra; Seyfi, Javad; Nekoei, Mehdi
2018-01-01
The main aim of this research is to study the effects of polymer molecular weight as well as non-solvent concentration on the phase separation, surface morphology and wettability of polyvinyl chloride (PVC) films. Gel permeation chromatography (GPC) results showed that the Mn of the used PVC grades is 6 × 104, 8.7 × 104 and 1.26 × 105 g/mol. It was found that a proper combination of polymer molecular weight and non-solvent content could result in superhydrophobic and self-cleaning behaviors. Scanning electron microscopy (SEM) results demonstrated that addition of ethanol causes the polymer chains to be severely aggregated at the films' surface forming strand-like structures decorated by nano-scale polymer spheres. The polymer molecular weight was found to affect the degree of porosity which is highly influential on the hydrophobicity of the films. The mechanism of phase separation process was also discussed and it was found that the instantaneous demixing is the dominant mechanism once higher contents of non-solvent were used. However, a delayed demixing mechanism was detected when the lower molecular weight PVC has been used which resulted in a pore-less and dense skin layer. Differential scanning calorimetry was also utilized to study the crystallization and glass transition behavior of samples.
NASA Astrophysics Data System (ADS)
Top, Soner; Vapur, Huseyin; Ekicibil, Ahmet
2018-07-01
In this study, zeolite Na-P1 synthesis from the fly ashes (FA) taken from dust catcher in Sugözü thermic power plant was researched. The structural and magnetic characteristics of the synthesized materials were studied by using the XRD, SEM, EDS, CEC, TGA, DTA, DSC and M-H techniques. High intensity wet magnetic separation was applied to the ashes at different magnetic field intensities. 61% of the iron oxide impurity (Fe2O3) was removed by single-stage high intensity wet magnetic separation at 1.5 T. Non-magnetic phase was accumulated in order to leach in alkali medium. 2 M NaOH was used as the synthesizing solution. Solid-liquid ratio was 0.3 kg:1 L. It was determined that the zeolitization degrees of the products depend on the reaction time. Zeolite Na-P1 (Na6Al6Si10O32·12H2O) which is the member of the group P zeolites was the dominant species after 10 h reaction time. Additionally, gismondine (Ca2Al4Si4O16·9H2O) presence was observed in the products. It was found out that the ferromagnetisms of the products were weakened by elapsed time. The CEC values of the synthesized products were the superior grades ranging from 269.63 meq/100 g to 388.85 meq/100 g.
NASA Astrophysics Data System (ADS)
Tingberg, Anders Martin
Optimisation in diagnostic radiology requires accurate methods for determination of patient absorbed dose and clinical image quality. Simple methods for evaluation of clinical image quality are at present scarce and this project aims at developing such methods. Two methods are used and further developed; fulfillment of image criteria (IC) and visual grading analysis (VGA). Clinical image quality descriptors are defined based on these two methods: image criteria score (ICS) and visual grading analysis score (VGAS), respectively. For both methods the basis is the Image Criteria of the ``European Guidelines on Quality Criteria for Diagnostic Radiographic Images''. Both methods have proved to be useful for evaluation of clinical image quality. The two methods complement each other: IC is an absolute method, which means that the quality of images of different patients and produced with different radiographic techniques can be compared with each other. The separating power of IC is, however, weaker than that of VGA. VGA is the best method for comparing images produced with different radiographic techniques and has strong separating power, but the results are relative, since the quality of an image is compared to the quality of a reference image. The usefulness of the two methods has been verified by comparing the results from both of them with results from a generally accepted method for evaluation of clinical image quality, receiver operating characteristics (ROC). The results of the comparison between the two methods based on visibility of anatomical structures and the method based on detection of pathological structures (free-response forced error) indicate that the former two methods can be used for evaluation of clinical image quality as efficiently as the method based on ROC. More studies are, however, needed for us to be able to draw a general conclusion, including studies of other organs, using other radiographic techniques, etc. The results of the experimental evaluation of clinical image quality are compared with physical quantities calculated with a theoretical model based on a voxel phantom, and correlations are found. The results demonstrate that the computer model can be a useful toot in planning further experimental studies.
A New Cluster Analysis-Marker-Controlled Watershed Method for Separating Particles of Granular Soils
Alam, Md Ferdous
2017-01-01
An accurate determination of particle-level fabric of granular soils from tomography data requires a maximum correct separation of particles. The popular marker-controlled watershed separation method is widely used to separate particles. However, the watershed method alone is not capable of producing the maximum separation of particles when subjected to boundary stresses leading to crushing of particles. In this paper, a new separation method, named as Monash Particle Separation Method (MPSM), has been introduced. The new method automatically determines the optimal contrast coefficient based on cluster evaluation framework to produce the maximum accurate separation outcomes. Finally, the particles which could not be separated by the optimal contrast coefficient were separated by integrating cuboid markers generated from the clustering by Gaussian mixture models into the routine watershed method. The MPSM was validated on a uniformly graded sand volume subjected to one-dimensional compression loading up to 32 MPa. It was demonstrated that the MPSM is capable of producing the best possible separation of particles required for the fabric analysis. PMID:29057823
Technological Studies at Thomas Edison Middle School. Grades 6-7-8.
ERIC Educational Resources Information Center
Foster, Patrick N.
This technology studies curriculum for grades 6-8 is a plan for each middle school student to experience technology education for approximately 60 days (1 trimester of a 180-day school year) in each grade. Section A provides definitions; structure or content for grade-level programs with science and technology unifiers (unifying curricular…
Hierarchical probabilistic Gabor and MRF segmentation of brain tumours in MRI volumes.
Subbanna, Nagesh K; Precup, Doina; Collins, D Louis; Arbel, Tal
2013-01-01
In this paper, we present a fully automated hierarchical probabilistic framework for segmenting brain tumours from multispectral human brain magnetic resonance images (MRIs) using multiwindow Gabor filters and an adapted Markov Random Field (MRF) framework. In the first stage, a customised Gabor decomposition is developed, based on the combined-space characteristics of the two classes (tumour and non-tumour) in multispectral brain MRIs in order to optimally separate tumour (including edema) from healthy brain tissues. A Bayesian framework then provides a coarse probabilistic texture-based segmentation of tumours (including edema) whose boundaries are then refined at the voxel level through a modified MRF framework that carefully separates the edema from the main tumour. This customised MRF is not only built on the voxel intensities and class labels as in traditional MRFs, but also models the intensity differences between neighbouring voxels in the likelihood model, along with employing a prior based on local tissue class transition probabilities. The second inference stage is shown to resolve local inhomogeneities and impose a smoothing constraint, while also maintaining the appropriate boundaries as supported by the local intensity difference observations. The method was trained and tested on the publicly available MICCAI 2012 Brain Tumour Segmentation Challenge (BRATS) Database [1] on both synthetic and clinical volumes (low grade and high grade tumours). Our method performs well compared to state-of-the-art techniques, outperforming the results of the top methods in cases of clinical high grade and low grade tumour core segmentation by 40% and 45% respectively.
DOE Office of Scientific and Technical Information (OSTI.GOV)
Tucker, J. D.; Miller, M. K.; Young, G. A.
Duplex stainless steels are desirable for use in power generation systems due to their attractive combination of strength, corrosion resistance, and cost. However, thermal embrittlement at intermediate homologous temperatures of ~887°F (475°C) and below, via spinodal decomposition, limits upper service temperatures for many applications. New lean grade duplex alloys have improved thermal stability over standard grades and potentially increase the upper service temperature or the lifetime at a given temperature for this class of material. The present work compares the thermal stability of lean grade, alloy 2003 to standard grade, alloy 2205, through a series of isothermal agings between 500°Fmore » (260°C) and 900°F (482°C) for times between 1 and 10,000 hours. Aged samples were characterized by changes in microhardness and impact toughness. Additionally, atom probe tomography was performed to illustrate the evolution of the α-α' phase separation in both alloys at select conditions. Atom probe tomography confirmed that phase separation occurs via spinodal decomposition for both alloys and identified the formation of Ni-Cu-Si-Mn-P clusters in alloy 2205 that may contribute to embrittlement of this alloy. The impact toughness model predictions for upper service temperature show that alloy 2003 can be considered for use in 550°F applications for 80 year service lifetimes based on a Charpy V-notch criteria of 35 ft-lbs at 70°F. Alloy 2205 should be limited to 500°F applications.« less
ERIC Educational Resources Information Center
Nelson, Derrick E.
2013-01-01
For over thirty years, research has been conducted on the relative benefits of integrating the sixth through eighth grades within the structure of the K-8 elementary school or of establishing a freestanding middle school structure. While the available research clearly supports the positive effects of the K-8 structure on academic achievement in…
Impact of Academic and Nonacademic Support Structures on Third Grade Reading Achievement
ERIC Educational Resources Information Center
Peugeot, Megan A.
2017-01-01
Through a Whole Child lens a cross-sectional quantitative research design evaluated the impact of academic and nonacademic support structures on student reading achievement per the third grade Ohio Achievement Assessment (OAA). Two demographically similar public school districts within geographical proximity in Ohio were involved utilizing…
Development of a 3/4-inch minus base course type a specification for Montana : final report.
DOT National Transportation Integrated Search
2016-12-01
Gravel bases are a critical component of roads, providing drainage, structural support, and load distribution within the pavement structure. Montana specifications currently exist for a 2-inch minus (Grade 5A) and 1- inch minus (Grade 6A) crushed b...
7 CFR 29.1164 - Cutters (C Group).
Code of Federal Regulations, 2011 CFR
2011-01-01
... injury. Grades, Grade Names, Minimum Specifications, and Tolerances C1L—Choice Quality Lemon Cutters Ripe.... Uniformity, 90 percent, injury tolerance, 5 percent. C2L—Fine Quality Lemon Cutters Ripe, open leaf structure... tolerance, 10 percent. C3L—Good Quality Lemon Cutters Ripe, open leaf structure, thin, oily, strong color...
7 CFR 29.1164 - Cutters (C Group).
Code of Federal Regulations, 2010 CFR
2010-01-01
... injury. Grades, Grade Names, Minimum Specifications, and Tolerances C1L—Choice Quality Lemon Cutters Ripe.... Uniformity, 90 percent, injury tolerance, 5 percent. C2L—Fine Quality Lemon Cutters Ripe, open leaf structure... tolerance, 10 percent. C3L—Good Quality Lemon Cutters Ripe, open leaf structure, thin, oily, strong color...
Air quality assessment at a congested urban intersection
DOT National Transportation Integrated Search
2000-09-01
The deficient transportation system of Beirut results in significant economic losses for the city and causes severe traffic congestion in the urban areas. Proposals have been made for grade separations at some of the worst congested intersections. Th...
Yan, Zhi; Zaman, Mostafa; Jiang, Liying
2011-12-12
In this work, the problem of a curved functionally graded piezoelectric (FGP) actuator with sandwich structure under electrical and thermal loads is investigated. The middle layer in the sandwich structure is functionally graded with the piezoelectric coefficient g 31 varying continuously along the radial direction of the curved actuator. Based on the theory of linear piezoelectricity, analytical solutions are obtained by using Airy stress function to examine the effects of material gradient and heat conduction on the performance of the curved actuator. It is found that the material gradient and thermal load have significant influence on the electroelastic fields and the mechanical response of the curved FGP actuator. Without the sacrifice of actuation deflection, smaller internal stresses are generated by using the sandwich actuator with functionally graded piezoelectric layer instead of the conventional bimorph actuator. This work is very helpful for the design and application of curved piezoelectric actuators under thermal environment.
Vidyadhar, A; Chalavadi, G; Das, A
2013-03-30
Gravity separation of metals from plastics in pulverized e-waste using flowing film concentration in a shaking table was investigated. Over 51% rejection of plastics in a single stage operation was achieved under optimum conditions. The shaking table was shown to be suitable for processing ground PCBs. Pulverized e-waste containing 22% metals was enriched to around 40% metals in a single pass. Statistical models for the mass yield of metal-rich stream and its grade were developed by design of experiments. Optimization was carried out to maximize the mass yield at a target product grade and preferred operating regimes were established. Experiments were designed to prevent metal loss and over 95% recovery values were obtained under all conditions. Settling distances of metals and plastics were computed and shown to be good indicators of separation performance. Particle morphology and stratification in the troughs in between the riffles were shown to influence the separation significantly. Water flow-assisted motion of the plastics was captured and its role in determining the effectiveness of separation was described. The efficacy of tabling was well established for treating ground PCBs. The wet process was shown to be environment friendly and sustainable. It is also relatively cheap and has good potential for industrial application. However, rigorous cost estimates will be required before commercial application. Copyright © 2013 Elsevier Ltd. All rights reserved.
Evaluation of open-graded friction course mixture : technical assistance report.
DOT National Transportation Integrated Search
2004-10-01
Open-graded friction course (OGFC) is a porous, gap-graded, predominantly single size aggregate bituminous mixture that contains a high percentage of air voids. The high air void content and the open structure of this mix promote the effective draina...
Spinodal Decomposition in Functionally Graded Super Duplex Stainless Steel and Weld Metal
NASA Astrophysics Data System (ADS)
Hosseini, Vahid A.; Thuvander, Mattias; Wessman, Sten; Karlsson, Leif
2018-07-01
Low-temperature phase separations (T < 500 °C), resulting in changes in mechanical and corrosion properties, of super duplex stainless steel (SDSS) base and weld metals were investigated for short heat treatment times (0.5 to 600 minutes). A novel heat treatment technique, where a stationary arc produces a steady state temperature gradient for selected times, was employed to fabricate functionally graded materials. Three different initial material conditions including 2507 SDSS, remelted 2507 SDSS, and 2509 SDSS weld metal were investigated. Selective etching of ferrite significantly decreased in regions heat treated at 435 °C to 480 °C already after 3 minutes due to rapid phase separations. Atom probe tomography results revealed spinodal decomposition of ferrite and precipitation of Cu particles. Microhardness mapping showed that as-welded microstructure and/or higher Ni content accelerated decomposition. The arc heat treatment technique combined with microhardness mapping and electrolytical etching was found to be a successful approach to evaluate kinetics of low-temperature phase separations in SDSS, particularly at its earlier stages. A time-temperature transformation diagram was proposed showing the kinetics of 475 °C-embrittlement in 2507 SDSS.
Spinodal Decomposition in Functionally Graded Super Duplex Stainless Steel and Weld Metal
NASA Astrophysics Data System (ADS)
Hosseini, Vahid A.; Thuvander, Mattias; Wessman, Sten; Karlsson, Leif
2018-04-01
Low-temperature phase separations (T < 500 °C), resulting in changes in mechanical and corrosion properties, of super duplex stainless steel (SDSS) base and weld metals were investigated for short heat treatment times (0.5 to 600 minutes). A novel heat treatment technique, where a stationary arc produces a steady state temperature gradient for selected times, was employed to fabricate functionally graded materials. Three different initial material conditions including 2507 SDSS, remelted 2507 SDSS, and 2509 SDSS weld metal were investigated. Selective etching of ferrite significantly decreased in regions heat treated at 435 °C to 480 °C already after 3 minutes due to rapid phase separations. Atom probe tomography results revealed spinodal decomposition of ferrite and precipitation of Cu particles. Microhardness mapping showed that as-welded microstructure and/or higher Ni content accelerated decomposition. The arc heat treatment technique combined with microhardness mapping and electrolytical etching was found to be a successful approach to evaluate kinetics of low-temperature phase separations in SDSS, particularly at its earlier stages. A time-temperature transformation diagram was proposed showing the kinetics of 475 °C-embrittlement in 2507 SDSS.
NASA Astrophysics Data System (ADS)
Rahimi, Mohammad; D'Angelo, Adriana; Gorski, Christopher A.; Scialdone, Onofrio; Logan, Bruce E.
2017-05-01
Thermally regenerative ammonia-based batteries (TRABs) have been developed to harvest low-grade waste heat as electricity. To improve the power production and anodic coulombic efficiency, the use of ethylenediamine as an alternative ligand to ammonia was explored here. The power density of the ethylenediamine-based battery (TRENB) was 85 ± 3 W m-2-electrode area with 2 M ethylenediamine, and 119 ± 4 W m-2 with 3 M ethylenediamine. This power density was 68% higher than that of TRAB. The energy density was 478 Wh m-3-anolyte, which was ∼50% higher than that produced by TRAB. The anodic coulombic efficiency of the TRENB was 77 ± 2%, which was more than twice that obtained using ammonia in a TRAB (35%). The higher anodic efficiency reduced the difference between the anode dissolution and cathode deposition rates, resulting in a process more suitable for closed loop operation. The thermal-electric efficiency based on ethylenediamine separation using waste heat was estimated to be 0.52%, which was lower than that of TRAB (0.86%), mainly due to the more complex separation process. However, this energy recovery could likely be improved through optimization of the ethylenediamine separation process.
Graphene-based active slow surface plasmon polaritons
Lu, Hua; Zeng, Chao; Zhang, Qiming; Liu, Xueming; Hossain, Md Muntasir; Reineck, Philipp; Gu, Min
2015-01-01
Finding new ways to control and slow down the group velocity of light in media remains a major challenge in the field of optics. For the design of plasmonic slow light structures, graphene represents an attractive alternative to metals due to its strong field confinement, comparably low ohmic loss and versatile tunability. Here we propose a novel nanostructure consisting of a monolayer graphene on a silicon based graded grating structure. An external gate voltage is applied to graphene and silicon, which are separated by a spacer layer of silica. Theoretical and numerical results demonstrate that the structure exhibits an ultra-high slowdown factor above 450 for the propagation of surface plasmon polaritons (SPPs) excited in graphene, which also enables the spatially resolved trapping of light. Slowdown and trapping occur in the mid-infrared wavelength region within a bandwidth of ~2.1 μm and on a length scale less than 1/6 of the operating wavelength. The slowdown factor can be precisely tuned simply by adjusting the external gate voltage, offering a dynamic pathway for the release of trapped SPPs at room temperature. The presented results will enable the development of highly tunable optoelectronic devices such as plasmonic switches and buffers. PMID:25676462
5 CFR 532.203 - Structure of regular wage schedules.
Code of Federal Regulations, 2011 CFR
2011-01-01
... grade; (3) NA means a nonappropriated fund nonsupervisory grade; and (4) NL means a nonappropriated fund... schedule for the area, plus 20 percent of the rate for step 2 of NA-8; (2) For grades NS-9 through NS-15... percent, respectively, above the step 2 rate of NA-15; (f) The number of within-grade steps and the...
Mechanical grading of round timber beams
David W. Green; Thomas M. Gorman; James W. Evans; Joseph F. Murphy
2006-01-01
Current procedures used to sort round timber beams into structural grades rely on visual grading methods and property assignments based on modification of clear wood properties. This study provides the technical basis for mechanical grading of 228 mm (9 in.) diameter round timbers. Test results on 225 round Engelmann spruceâalpine firâlodgepole pine beams demonstrate...
The Evaluation of Pre-Service Preschool Teachers' Knowledge about the Concept of Environment
ERIC Educational Resources Information Center
Ahi, Berat; Alisinanoglu, Fatma
2015-01-01
The purpose of the research is to evaluate pre-service preschool teachers' knowledge about environment by analyzing their drawings about it. 70 first grade, 99 second grade, 56 third grade and 44 fourth grade, with a total of 269 students have been evaluated in this research. This qualitative research was made with social structuralism vision.…
Sharabi, Adi; Levi, Uzi; Margalit, Malka
2012-01-01
The study examined the contributions of individual and familial variables for the prediction of loneliness as a developmental risk and the sense of coherence as a protective factor. The sample consisted of 287 children from grades 5-6. Their loneliness, sense of coherence, hope, effort, and family climate were assessed. Separate hierarchical multiple regression analyses revealed that family cohesion and children's hope contributed to the explanation of the risk and protective outcomes. Yet, the contribution of the family adaptability was not significant. Cluster analysis of the family climate dimensions (i.e., cohesion and adaptability) was performed to clarify the interactive roles of family adaptability together with family cohesion. The authors identified 4 separate family profiles: Children in the 2 cohesive families' clusters (Cohesive Structured Families and Cohesive Adaptable Families) reported the lowest levels of loneliness and the highest levels of personal strengths. Children within rigid and noncohesive family cluster reported the highest levels of loneliness and the lowest levels of children's sense of coherence. The unique role of the family flexibility within nonsupportive family systems was demonstrated. The results further clarified the unique profiles' characteristics of the different family clusters and their adjustment indexes in terms of loneliness and personal strengths.
Math anxiety and its relationship with basic arithmetic skills among primary school children.
Sorvo, Riikka; Koponen, Tuire; Viholainen, Helena; Aro, Tuija; Räikkönen, Eija; Peura, Pilvi; Dowker, Ann; Aro, Mikko
2017-09-01
Children have been found to report and demonstrate math anxiety as early as the first grade. However, previous results concerning the relationship between math anxiety and performance are contradictory, with some studies establishing a correlation between them while others do not. These contradictory results might be related to varying operationalizations of math anxiety. In this study, we aimed to examine the prevalence of math anxiety and its relationship with basic arithmetic skills in primary school children, with explicit focus on two aspects of math anxiety: anxiety about failure in mathematics and anxiety in math-related situations. The participants comprised 1,327 children at grades 2-5. Math anxiety was assessed using six items, and basic arithmetic skills were assessed using three assessment tasks. Around one-third of the participants reported anxiety about being unable to do math, one-fifth about having to answer teachers' questions, and one tenth about having to do math. Confirmatory factor analysis indicated that anxiety about math-related situations and anxiety about failure in mathematics are separable aspects of math anxiety. Structural equation modelling suggested that anxiety about math-related situations was more strongly associated with arithmetic fluency than anxiety about failure. Anxiety about math-related situations was most common among second graders and least common among fifth graders. As math anxiety, particularly about math-related situations, was related to arithmetic fluency even as early as the second grade, children's negative feelings and math anxiety should be identified and addressed from the early primary school years. © 2017 The British Psychological Society.
NASA Astrophysics Data System (ADS)
Haley, James M.
There is currently a shortage of students graduating with STEM (science, technology, engineering, or mathematics) degrees, particularly women and students of color. Approximately half of students who begin a STEM major eventually switch out. Many switchers cite the competitiveness, grading curves, and weed-out culture of introductory STEM classes as reasons for the switch. Variables known to influence resilience include a student's implicit theory of intelligence and achievement goal orientation. Incremental theory (belief that intelligence is malleable) and mastery goals (pursuit of increased competence) are more adaptive in challenging classroom contexts. This dissertation investigates the role that college science grading policies and messages about the importance of effort play in shaping both implicit theories and achievement goal orientation. College students (N = 425) were randomly assigned to read one of three grading scenarios: (1) a "mastery" scenario, which used criterion-referenced grading, permitted tests to be retaken, and included a strong effort message; (2) a "norm" scenario, which used norm-referenced grading (grading on the curve); or (3) an "effort" scenario, which combined a strong effort message with the norm-referenced policies. The dependent variables included implicit theories of intelligence, perceived classroom goal structure, and self-efficacy. A different sample of students (N = 15) were randomly assigned a scenario to read, asked to verbalize their thoughts, and responded to questions in a semi-structured interview. Results showed that students reading the mastery scenario were more likely to endorse an incremental theory of intelligence, perceived greater mastery goal structure, and had higher self-efficacy. The effort message had no effect on self-efficacy, implicit theory, and most of the goal structure measures. The interviews revealed that it was the retake policy in the mastery scenario and the competitive atmosphere in the norm-referenced scenarios that were likely driving the results. Competitive grading policies appear to be incompatible with mastery goals, cooperative learning, and a belief in the efficacy of effort. Implications for college STEM instruction are discussed.
NASA Astrophysics Data System (ADS)
Yang, Weitao; Li, Yuxiang; Ying, Sanjiu
2015-04-01
A fabrication process to produce graded porous and skin-core structure propellants via supercritical CO2 concentration profile is reported in this article. It utilizes a partial gas saturation technique to obtain nonequilibrium gas concentration profiles in propellants. Once foamed, the propellant obtains a graded porous or skin-pore structure. This fabrication method was studied with RDX(Hexogen)-based propellant under an SC-CO2 saturation condition. The principle was analyzed and the one-dimensional diffusion model was employed to estimate the gas diffusion coefficient and to predict the gas concentration profiles inside the propellant. Scanning electron microscopy images were used to analyze the effects of partial saturation on the inner structure. The results also suggested that the sorption time and desorption time played an important role in gas profile generation and controlled the inner structure of propellants.
Design and fabrication of planar structures with graded electromagnetic properties
NASA Astrophysics Data System (ADS)
Good, Brandon Lowell
Successfully integrating electromagnetic properties in planar structures offers numerous benefits to the microwave and optical communities. This work aims at formulating new analytic and optimized design methods, creating new fabrication techniques for achieving those methods, and matching appropriate implementation of methods to fabrication techniques. The analytic method consists of modifying an approach that realizes perfect antireflective properties from graded profiles. This method is shown for all-dielectric and magneto-dielectric grading profiles. The optimized design methods are applied to transformer (discrete) or taper (continuous) designs. From these methods, a subtractive and an additive manufacturing technique were established and are described. The additive method, dry powder dot deposition, enables three dimensional varying electromagnetic properties in a structural composite. Combining the methods and fabrication is shown in two applied methodologies. The first uses dry powder dot deposition to design one dimensionally graded electromagnetic profiles in a planar fiberglass composite. The second method simultaneously applies antireflective properties and adjusts directivity through a slab through the use of subwavelength structures to achieve a flat antireflective lens. The end result of this work is a complete set of methods, formulations, and fabrication techniques to achieve integrated electromagnetic properties in planar structures.
ERIC Educational Resources Information Center
Meyer, Bonnie J. F.; Middlemiss, Wendy; Theodorou, Elena; Brezinski, Kristen L.; McDougall, Janet; Bartlett, Brendan J.
2002-01-01
Assesses the impact of using the structure strategy as a base for an intergenerational Internet tutoring program in which older adults provided Internet-based tutoring for 5th-grade students. Both tutors and children in the structure strategy group with tutors increased strategy use, total and main idea recall, and self-efficacy. Findings have…
ERIC Educational Resources Information Center
Salmah, Ummy; Putri, Ratu Ilma Indra; Somakim
2015-01-01
The aim of this study is to design learning activities that can support students to develop strategies for the addition of number 1 to 20 in the first grade by involving students' spatial structuring ability. This study was conducted in Indonesia by involving 27 students. In this paper, one of three activities is discussed namely ten-box activity.…
ERIC Educational Resources Information Center
STRICKLAND, RUTH G.
THIS STUDY WAS DESIGNED TO (1) ANALYZE THE ORAL LANGUAGE STRUCTURE OF FIRST- THROUGH SIXTH-GRADE CHILDREN, (2) COMPARE THAT STRUCTURE WITH THE LANGUAGE STRUCTURE IN BOOKS BY WHICH CHILDREN ARE TAUGHT TO READ, AND (3) ASCERTAIN, AT THE SECOND-GRADE LEVEL, THE INFLUENCE OF ANY DETERMINED DIFFERENCES ON THE QUALITY OF READING, READING INTERPRETATION,…
Inferior turbinate classification system, grades 1 to 4: development and validation study.
Camacho, Macario; Zaghi, Soroush; Certal, Victor; Abdullatif, Jose; Means, Casey; Acevedo, Jason; Liu, Stanley; Brietzke, Scott E; Kushida, Clete A; Capasso, Robson
2015-02-01
To develop a validated inferior turbinate grading scale. Development and validation study. Phase 1 development (alpha test) consisted of a proposal of 10 different inferior turbinate grading scales (>1,000 clinic patients). Phase 2 validation (beta test) utilized 10 providers grading 27 standardized endoscopic photos of inferior turbinates using two different classification systems. Phase 3 validation (pilot study) consisted of 100 live consecutive clinic patients (n = 200 inferior turbinates) who were each prospectively graded by 18 different combinations of two independent raters, and grading was repeated by each of the same two raters, two separate times for each patient. In the development phase, 25% (grades 1-4) and 33% (grades 1-4) were the most useful systems. In the validation phase, the 25% classification system was found to be the best balance between potential clinical utility and ability to grade; the photo grading demonstrated a Cohen's kappa (κ) = 0.4671 ± 0.0082 (moderate inter-rater agreement). Live-patient grading with the 25% classification system demonstrated an overall inter-rater reliability of 71.5% (95% confidence interval [CI]: 64.8-77.3), with overall substantial agreement (κ = 0.704 ± 0.028). Intrarater reliability was 91.5% (95% CI: 88.7-94.3). Distribution for the 200 inferior turbinates was as follows: 25% quartile = grade 1, 50% quartile (median) = grade 2, 75% quartile = grade 3, and 90% quartile = grade 4. Mean turbinate size was 2.22 (95% CI: 2.07-2.34; standard deviation 1.02). Categorical κ was as follows: grade 1, 0.8541 ± 0.0289; grade 2, 0.7310 ± 0.0289; grade 3, 0.6997 ± 0.0289, and grade 4, 0.7760 ± 0.0289. The 25% (grades 1-4) inferior turbinate classification system is a validated grading scale with high intrarater and inter-rater reliability. This system can facilitate future research by tracking the effect of interventions on inferior turbinates. 2c. © 2014 The American Laryngological, Rhinological and Otological Society, Inc.
The Middle Grades Principal: A Research Agenda
ERIC Educational Resources Information Center
Bickmore, Dana L.
2016-01-01
Advocates for middle grades education suggest that principals are critical to the implementation of curriculum, instruction, assessment, and organizational structures that meet young adolescent needs. Yet, there is little evidence associating principal practices outlined by middle grades proponents to outcomes or how principals learn the knowledge…
Dumarey, Melanie; Wikström, Håkan; Fransson, Magnus; Sparén, Anders; Tajarobi, Pirjo; Josefson, Mats; Trygg, Johan
2011-09-15
Roll compaction is gaining importance in pharmaceutical industry for the dry granulation of heat or moisture sensitive powder blends with poor flowing properties prior to tabletting. We studied the influence of microcrystalline cellulose (MCC) properties on the roll compaction process and the consecutive steps in tablet manufacturing. Four dissimilar MCC grades, selected by subjecting their physical characteristics to principal components analysis, and three speed ratios, i.e. the ratio of the feed screw speed and the roll speed of the roll compactor, were included in a full factorial design. Orthogonal projection to latent structures was then used to model the properties of the resulting roll compacted products (ribbons, granules and tablets) as a function of the physical MCC properties and the speed ratio. This modified version of partial least squares regression separates variation in the design correlated to the considered response from the variation orthogonal to that response. The contributions of the MCC properties and the speed ratio to the predictive and orthogonal components of the models were used to evaluate the effect of the design variation. The models indicated that several MCC properties, e.g. bulk density and compressibility, affected all granule and tablet properties, but only one studied ribbon property: porosity. After roll compaction, Ceolus KG 1000 resulted in tablets with obvious higher tensile strength and lower disintegration time compared to the other MCC grades. This study confirmed that the particle size increase caused by roll compaction is highly responsible for the tensile strength decrease of the tablets. Copyright © 2011 Elsevier B.V. All rights reserved.
Zimmermann, Aleksandra; Greco, Roberto; Walker, Isabel; Horak, Jeannie; Cavazzini, Alberto; Lämmerhofer, Michael
2014-08-08
Synthetic oligonucleotides gain increasing importance in new therapeutic concepts and as probes in biological sciences. If pharmaceutical-grade purities are required, chromatographic purification using ion-pair reversed-phase chromatography is commonly carried out. However, separation selectivity for structurally closely related impurities is often insufficient, especially at high sample loads. In this study, a "mixed-mode" reversed-phase/weak anion exchanger stationary phase has been investigated as an alternative tool for chromatographic separation of synthetic oligonucleotides with minor sequence variations. The employed mixed-mode phase shows great flexibility in method development. It has been run in various gradient elution modes, viz. one, two or three parameter (mixed) gradients (altering buffer pH, buffer concentration, and organic modifier) to find optimal elution conditions and gain further insight into retention mechanisms. Compared to ion-pair reversed-phase and mere anion-exchange separation, enhanced selectivities were observed with the mixed-mode phase for 20-23 nucleotide (nt) long oligonucleotides with similar sequences. Oligonucleotides differing by 1, 2 or 3 nucleotides in length could be readily resolved and separation factors for single nucleotide replacements declined in the order Cytosine (C)/Guanine (G)>Adenine (A)/Guanine∼Guanine/Thymine (T)>Adenine/Cytosine∼Cytosine/Thymine>Adenine/Thymine. Selectivities were larger when the modification was at the 3' terminal-end, declined when it was in the middle of the sequence and was smallest when it was located at the 5' terminus. Due to the lower surface area of the 200Å pore size mixed-mode stationary phase compared to the corresponding 100Å material, lower retention times with equal selectivities under milder elution conditions were achievable. Considering high sample loading capacities of the mixed-mode anion-exchanger phase, it should have great potential for chromatographic oligonucleotide separation and purification. Copyright © 2014 Elsevier B.V. All rights reserved.
Tensile strength/yield strength (TS/YS) ratios of high-strength steel (HSS) reinforcing bars
NASA Astrophysics Data System (ADS)
Tavio, Anggraini, Retno; Raka, I. Gede Putu; Agustiar
2018-05-01
The building codes such as American Concrete Institute (ACI) 318M-14 and Standard National Indonesia (SNI) 2847:2013 require that the ratio of tensile strength (TS) and yield strength (YS) should not less than 1.25. The requirement is based on the assumption that a capability of a structural member to develop inelastic rotation capacity is a function of the length of the yield region. This paper reports an investigation on various steel grades, namely Grades 420, 550, 650, and 700 MPa, to examine the impact of different TS/YS ratios if it is less or greater than the required value. Grades 550, 650, and 700 MPa were purposely selected with the intention to examine if these higher grades are still promising to be implemented in special structural systems since they are prohibited by the building codes for longitudinal reinforcement, whereas Grade 420 MPa bars are the maximum limit of yield strength of reinforcing bars that is allowable for longitudinal reinforcement of special structural systems. Tensile tests of these steel samples were conducted under displacement controlled mode to capture the complete stress-strain curves and particularly the post-yield response of the steel bars. From the study, it can be concluded that Grade 420 performed higher TS/YS ratios and they were able to reach up to more than 1.25. However, the High Strength Still (HSS) bars (Grades 550, 600, and 700 MPa) resulted in lower TS/YS ratios (less than 1.25) compared with those of Grade 420 MPa.
DOT National Transportation Integrated Search
2012-12-31
In 2008, there were 2,395 incidents at highway-rail intersections (level crossings) in the United States, resulting in 939 injuries and 287 fatalities. Crossing elimination, grade separation, and the implementation of traditional warning devices are ...
Breast Carcinoma, Intratumour Heterogeneity and Histological Grading, Using Geostatistics
Sharifi‐Salamatian, Vénus; de Roquancourt, Anne; Rigaut, Jean Paul
2000-01-01
Tumour progression is currently believed to result from genetic instability. Chromosomal patterns specific of a type of cancer are frequent even though phenotypic spatial heterogeneity is omnipresent. The latter is the usual cause of histological grading imprecision, a well documented problem, without any fully satisfactory solution up to now. The present article addresses this problem in breast carcinoma. The assessment of a genetic marker for human tumours requires quantifiable measures of intratumoral heterogeneity. If any invariance paradigm representing a stochastic or geostatistic function could be discovered, this might help in solving the grading problem. A novel methodological approach using geostatistics to measure heterogeneity is used. Twenty tumours from the three usual (Scarff‐Bloom and Richardson) grades were obtained and paraffin sections stained by MIB‐1 (Ki‐67) and peroxidase staining. Whole two‐dimensional sections were sampled. Morphometric grids of variable sizes allowed a simple and fast recording of positions of epithelial nuclei, marked or not by MIB‐1. The geostatistical method is based here upon the asymptotic behaviour of dispersion variance. Measure of asymptotic exponent of dispersion variance shows an increase from grade 1 to grade 3. Preliminary results are encouraging: grades 1 and 3 on one hand and 2 and 3 on the other hand are totally separated. The final proof of an improved grading using this measure will of course require a confrontation with the results of survival studies. PMID:11153611
Breast carcinoma, intratumour heterogeneity and histological grading, using geostatistics.
Sharifi-Salamatian, V; de Roquancourt, A; Rigaut, J P
2000-01-01
Tumour progression is currently believed to result from genetic instability. Chromosomal patterns specific of a type of cancer are frequent even though phenotypic spatial heterogeneity is omnipresent. The latter is the usual cause of histological grading imprecision, a well documented problem, without any fully satisfactory solution up to now. The present article addresses this problem in breast carcinoma. The assessment of a genetic marker for human tumours requires quantifiable measures of intratumoral heterogeneity. If any invariance paradigm representing a stochastic or geostatistic function could be discovered, this might help in solving the grading problem. A novel methodological approach using geostatistics to measure heterogeneity is used. Twenty tumours from the three usual (Scarff-Bloom and Richardson) grades were obtained and paraffin sections stained by MIB-1 (Ki-67) and peroxidase staining. Whole two-dimensional sections were sampled. Morphometric grids of variable sizes allowed a simple and fast recording of positions of epithelial nuclei, marked or not by MIB-1. The geostatistical method is based here upon the asymptotic behaviour of dispersion variance. Measure of asymptotic exponent of dispersion variance shows an increase from grade 1 to grade 3. Preliminary results are encouraging: grades 1 and 3 on one hand and 2 and 3 on the other hand are totally separated. The final proof of an improved grading using this measure will of course require a confrontation with the results of survival studies.
Stress wave sorting of red maple logs for structural quality
Xiping Wang; Robert J. Ross; David W. Green; Brian Brashaw; Karl Englund; Michael Wolcott
2004-01-01
Existing log grading procedures in the United States make only visual assessments of log quality. These procedures do not incorporate estimates of the modulus of elasticity (MOE) of logs. It is questionable whether the visual grading procedures currently used for logs adequately assess the potential quality of structural products manufactured from them, especially...
Effective Practices and Structures for Middle Grades Education. Policy Issues.
ERIC Educational Resources Information Center
Mac Iver, Douglas
This document draws upon theory and research about early adolescence and about the effects of middle grades structures and practices on student outcomes. The purpose is to identify specific problem areas and promising innovations that should be considered by policymakers as they establish guidelines for the restructuring of education in the middle…
DOT National Transportation Integrated Search
2005-01-01
The intersection of a rail line and a roadway at an at-grade crossing represents the meeting of two vastly different transportation modes. Although they may share a common crossing where they intersect, the typical structural design of the supporting...
A Structural Equation Model for Predicting Business Student Performance
ERIC Educational Resources Information Center
Pomykalski, James J.; Dion, Paul; Brock, James L.
2008-01-01
In this study, the authors developed a structural equation model that accounted for 79% of the variability of a student's final grade point average by using a sample size of 147 students. The model is based on student grades in 4 foundational business courses: introduction to business, macroeconomics, statistics, and using databases. Educators and…
NASA Astrophysics Data System (ADS)
Robertson, Alastair H. F.; Collins, Alan S.
2002-02-01
The Shyok Suture Zone (Northern Suture) of North Pakistan is an important Cretaceous-Tertiary suture separating the Asian continent (Karakoram) from the Cretaceous Kohistan-Ladakh oceanic arc to the south. In previously published interpretations, the Shyok Suture Zone marks either the site of subduction of a wide Tethyan ocean, or represents an Early Cretaceous intra-continental marginal basin along the southern margin of Asia. To shed light on alternative hypotheses, a sedimentological, structural and igneous geochemical study was made of a well-exposed traverse in North Pakistan, in the Skardu area (Baltistan). To the south of the Shyok Suture Zone in this area is the Ladakh Arc and its Late Cretaceous, mainly volcanogenic, sedimentary cover (Burje-La Formation). The Shyok Suture Zone extends northwards (ca. 30 km) to the late Tertiary Main Karakoram Thrust that transported Asian, mainly high-grade metamorphic rocks southwards over the suture zone. The Shyok Suture Zone is dominated by four contrasting units separated by thrusts, as follows: (1). The lowermost, Askore amphibolite, is mainly amphibolite facies meta-basites and turbiditic meta-sediments interpreted as early marginal basin rift products, or trapped Tethyan oceanic crust, metamorphosed during later arc rifting. (2). The overlying Pakora Formation is a very thick (ca. 7 km in outcrop) succession of greenschist facies volcaniclastic sandstones, redeposited limestones and subordinate basaltic-andesitic extrusives and flow breccias of at least partly Early Cretaceous age. The Pakora Formation lacks terrigenous continental detritus and is interpreted as a proximal base-of-slope apron related to rifting of the oceanic Ladakh Arc; (3). The Tectonic Melange (<300 m thick) includes serpentinised ultramafic rocks, near mid-ocean ridge-type volcanics and recrystallised radiolarian cherts, interpreted as accreted oceanic crust. (4). The Bauma-Harel Group (structurally highest) is a thick succession (several km) of Ordovician and Carboniferous to Permian-Triassic, low-grade, mixed carbonate/siliciclastic sedimentary rocks that accumulated on the south-Asian continental margin. A structurally associated turbiditic slope/basinal succession records rifting of the Karakoram continent (part of Mega-Lhasa) from Gondwana. Red clastics of inferred fluvial origin ('molasse') unconformably overlie the Late Palaeozoic-Triassic succession and are also intersliced with other units in the suture zone. Reconnaissance further east (north of the Shyok River) indicates the presence of redeposited volcaniclastic sediments and thick acid tuffs, derived from nearby volcanic centres, presumed to lie within the Ladakh Arc. In addition, comparison with Lower Cretaceous clastic sediments (Maium Unit) within the Northern Suture Zone, west of the Nanga Parbat syntaxis (Hunza River) reveals notable differences, including the presence of terrigenous quartz-rich conglomerates, serpentinite debris-flow deposits and a contrasting structural history. The Shyok Suture Zone in the Skardu area is interpreted to preserve the remnants of a rifted oceanic back-arc basin and components of the Asian continental margin. In the west (Hunza River), a mixed volcanogenic and terrigenous succession (Maium Unit) is interpreted to record syn-deformational infilling of a remnant back-arc basin/foreland basin prior to suturing of the Kohistan Arc with Asia (75-90 Ma).
NASA Astrophysics Data System (ADS)
Wu, Yu; Yi, Shi-He; He, Lin; Chen, Zhi; Zhu, Yang-Zhu
2014-11-01
Experimental studies which focus on flow visualization and the velocity field of a supersonic laminar/turbulent flow over a compression ramp were carried out in a Mach 3.0 wind tunnel. Fine flow structures and velocity field structures were obtained via NPLS (nanoparticle-tracer planar laser scattering) and PIV (particle image velocimetry) techniques, time-averaged flow structures were researched, and spatiotemporal evolutions of transient flow structures were analyzed. The flow visualization results indicated that when the ramp angles were 25°, a typical separation occurred in the laminar flow, some typical flow structures such as shock induced by the boundary layer, separation shock, reversed flow and reattachment shock were visible clearly. While a certain extent separation occurred in turbulent flow, the separation region was much smaller. When the ramp angles were 28°, laminar flow separated further, and the separation region expanded evidently, flow structures in the separation region were complex. While a typical separation occurred in turbulent flow, reversed flow structures were significant, flow structures in the separation region were relatively simple. The experimental results of velocity field were corresponding to flow visualization, and the velocity field structures of both compression ramp flows agreed with the flow structures well. There were three layered structures in the U component velocity, and the V component velocity appeared like an oblique “v”. Some differences between these two compression ramp flows can be observed in the velocity profiles of the shear layer and the shearing intensity.
1993-09-23
in-force (RIF). This has been a goal of the Navy, and has so far been successful . Other services have had to resort to involuntarily separating large...National Defense Authorization Act , qualified service members who accept and are approved for the program must choose between two payment/benefit options...GRADE, MARRIED, CHILD, + + -+ MILSPS, HSD, NONGRAD, UNEMP, ADVRATE, HITECH ) -+ - _+ VSI = f(MINORITY, AFQT, MALE, YOS, MARRIED, CHILD, MILSPS
Apparatus for obtaining silicon from fluosilicic acid
Sanjurjo, Angel
1986-05-20
Apparatus for producing low cost, high purity solar grade silicon ingots in single crystal or quasi single crystal ingot form in a substantially continuous operation in a two stage reactor starting with sodium fluosilicate and a metal more electropositive than silicon (preferably sodium) in separate compartments having easy vapor transport therebetween and thermally decomposing the sodium fluosilicate to cause formation of substantially pure silicon and a metal fluoride which may be continuously separated in the melt and silicon may be directly and continuously cast from the melt.
A systematic review including meta-analysis of work environment and burnout symptoms.
Aronsson, Gunnar; Theorell, Töres; Grape, Tom; Hammarström, Anne; Hogstedt, Christer; Marteinsdottir, Ina; Skoog, Ingmar; Träskman-Bendz, Lil; Hall, Charlotte
2017-03-16
Practitioners and decision makers in the medical and insurance systems need knowledge on the relationship between work exposures and burnout. Many burnout studies - original as well as reviews - restricted their analyses to emotional exhaustion or did not report results on cynicism, personal accomplishment or global burnout. To meet this need we carried out this review and meta-analyses with the aim to provide systematically graded evidence for associations between working conditions and near-future development of burnout symptoms. A wide range of work exposure factors was screened. Inclusion criteria were: 1) Study performed in Europe, North America, Australia and New Zealand 1990-2013. 2) Prospective or comparable case control design. 3) Assessments of exposure (work) and outcome at baseline and at least once again during follow up 1-5 years later. Twenty-five articles met the predefined relevance and quality criteria. The GRADE-system with its 4-grade evidence scale was used. Most of the 25 studies focused emotional exhaustion, fewer cynicism and still fewer personal accomplishment. Moderately strong evidence (grade 3) was concluded for the association between job control and reduced emotional exhaustion and between low workplace support and increased emotional exhaustion. Limited evidence (grade 2) was found for the associations between workplace justice, demands, high work load, low reward, low supervisor support, low co-worker support, job insecurity and change in emotional exhaustion. Cynicism was associated with most of these work factors. Reduced personal accomplishment was only associated with low reward. There were few prospective studies with sufficient quality on adverse chemical, biological and physical factors and burnout. While high levels of job support and workplace justice were protective for emotional exhaustion, high demands, low job control, high work load, low reward and job insecurity increased the risk for developing exhaustion. Our approach with a wide range of work exposure factors analysed in relation to the separate dimensions of burnout expanded the knowledge of associations, evidence as well as research needs. The potential of organizational interventions is illustrated by the findings that burnout symptoms are strongly influenced by structural factors such as job demands, support and the possibility to exert control.
Efficient High-Fidelity, Geometrically Exact, Multiphysics Structural Models
2011-10-14
fuctionally graded core. International Journal for Numerical Methods in Engineering, 68:940– 966, 2006. 7F. Shang, Z. Wang, and Z. Li. Analysis of...normal deformable plate theory and MLPG method with radial basis fuctions . Composite Structures, 80:539– 552, 2007. 17W. Zhen and W. Chen. A higher-order...functionally graded plates by using higher-order shear and normal deformable plate theory and MLPG method with radial basis fuctions . Composite Structures, 80
,
1975-01-01
The area designated for possible oil and gas lease sale in Bureau of Land Management memorandum 3310 #43 (722) and referred to therein as part of the United States South Atlantic Outer Continental Shelf (OCS) contains about 98,000 square kilometres of the continental margin seaward of the 3 mile offshore limit and within the 600 metre isobath. The designated area, offshore of North Carolina, South Carolina, Georgia, and Florida, encompasses parts of three physiographic provinces: the Continental Shelf, the Florida-Hatteras Slope, and the Blake Plateau. The structural framework of the U.3. South Atlantic region is dominated by the Southeast Georgia Embayment --an east-plunging depression recessed into the Atlantic Coastal Plain and shelf between Cape Fear, North Carolina and Jacksonville, Florida. The embayment is bounded to the north by the Cape Fear Arch and to southeast by the Peninsular Arch. Refraction data indicate a minor basement(?) ridge beneath the outer shelf between 30? and 32?N at 80?W. Drill hole data also suggest a gentle fold or accretionary structure (reef?) off the east coast of Florida. Several other structural features have been identified by refraction and reflection techniques and drilling. These are the Yamacraw Uplift, Burton High, Stone Arch, and the Suwannee Channel. Gravity and magnetic anomalies within the area probably result from emplacement of magma bodies along linear features representing fundamental crustal boundaries. Of these anomalies, the most prominent, is a segment of the East Coast Magnetic Anomaly which crosses the coast at Brunswick, Georgia. This anomaly has been interpreted as representing an ancient continental boundary where two formerly separate continental plates collided and were welded together. There may be as much as 5,000 m of sedimentary rocks in the Southeast Georgia Embayment out to the 600 m isobath. Basement rocks beneath the Southeast Georgia Embayment are expected to be similar to those exposed in the Appalachian Piedmont province. Triassic deposits are likely to exist beneath the inner Continental Shelf, and probably consist of nonmarine arkosic sandstones, shales, basalt flows, and diabase intrusions deposited in relatively narrow northeast-trending grabens. Jurassic marine carbonates in the Bahamas grade northward to carbonates, shales, sand, and arkose in North Carolina. Salt may be present in the basal Jurassic section in the Southeast Georgia Embayment. Up to 4,000 m of Jurassic-Lower Cretaceous rocks are expected out to the 600 m water depth. Lower Cretaceous rocks in southern Florida are shallow-water marine limestone and dolomites with beds of anhydrite. In coastal North Carolina the Lower Cretaceous is a marine section made up of shales, sand, and sandy limestone. The Upper Cretaceous is composed almost entirely of marine carbonates in southern Florida grading northward to nonmarine to marginal marine, sandstones and shales with minor amounts of carbonates. In general, Upper Cretaceous rocks will probably maintain a fairly constant thickness (600 m) on the Continental Shelf and grade downdip from terrigeneous sands and shales to more marine chalks, limestones, and dolomites. The Cenozoic rocks are predominantly shallow-water marine carbonates in Florida grading northward into a marginal marine to marine clastic facies composed of sands, marls, and limestones. The offshore Cenozoic section is expected to range in thickness from 600 to 1100 m. A reconstruction of the geologic history suggests that the present continental margin is a result of a collision of the North American and African continental plates during late Paleozoic time and later modification during Late Triassic time when the continental plates separated, forming the present Atlantic Ocean. No commercial production of hydrocarbons has been developed on the Atlantic Coastal Plain immediately adjacent to the studied area even though hydrocarbon shows have been encountered in ons
Teaching "Sin Fronteras" (Without Borders)
ERIC Educational Resources Information Center
Diaz, Marisol; Baptiste, H. Prentice
2017-01-01
By breaking down "fronteras" (borders) in classroom instruction, educators can interrupt and examine the interactions and discourses that create separations and alienations among people. The authors describe an effective instructional approach used in a second-grade class and modified for a class of preservice teachers.
DOT National Transportation Integrated Search
1999-01-01
As transportation system elements of this country continue to evolve, issues : that may have seemed foregone to a prior generation have crystallized into : topics requiring substantive review. Witness, for example, the growth in both : freight railro...
Children of Divorce: Relearning Happiness.
ERIC Educational Resources Information Center
Prokop, Michael S.
1990-01-01
Describes St. Mary's Middle School's Divorce Group Counseling Program for fifth through eighth grade students whose parents are involved in a separation or divorce. The program uses a multimodality approach to teach divorce concepts, coping skills, relaxation techniques, and appreciation for the needs of others. (DMM)
Code of Federal Regulations, 2010 CFR
2010-01-01
... 7 Agriculture 8 2010-01-01 2010-01-01 false Reports. 917.50 Section 917.50 Agriculture Regulations of the Department of Agriculture (Continued) AGRICULTURAL MARKETING SERVICE (Marketing Agreements and... shipped, showing separately the variety, grade, and size of the fruit; (6) The destination; (7...
Code of Federal Regulations, 2010 CFR
2010-01-01
... 7 Agriculture 8 2010-01-01 2010-01-01 false Reports. 920.60 Section 920.60 Agriculture Regulations of the Department of Agriculture (Continued) AGRICULTURAL MARKETING SERVICE (Marketing Agreements and... quantities shipped, showing separately the variety, size and grade of the fruit; (6) The destination; (7...
40 CFR 246.200-8 - Recommended procedures: Cost analysis.
Code of Federal Regulations, 2010 CFR
2010-07-01
...) SOLID WASTES SOURCE SEPARATION FOR MATERIALS RECOVERY GUIDELINES Requirements and Recommended Procedures..., storage, and transportation costs have been made, and estimated tonnages of both recoverable high-grade... for revenue from paper sales and savings from diverting recycled materials from disposal. Potential...
Separation technologies for the recovery and dehydration of alcohols from fermentation broths
Multi-column distillation followed by molecular sieve adsorption is currently the standard method for producing fuel grade ethanol from dilute fermentation broths in modern corn-to-ethnol facilities. As the liquid biofuels industry transitions to lignocellulosic feedstocks, expan...
Energy Efficient Hybrid Vapor Stripping-Vapor Permeation Process for Ethanol Recovery ad Dehydration
Distillation combined with molecular sieve dehydration is the current state of the art for fuel grade ethanol production from fermentation broths. To improve the sustainability of bioethanol production, energy efficient separation alternatives are needed, particularly for lower f...
Talent Development Middle Grades Program. What Works Clearinghouse Intervention Report
ERIC Educational Resources Information Center
What Works Clearinghouse, 2013
2013-01-01
The "Talent Development Middle Grades Program" is a comprehensive reform model that transforms the structure and curriculum of large urban middle schools with the aim of improving student achievement and raising teacher and student expectations. Key features of the "Talent Development Middle Grades Program" include small…
Computerized Grading of Anatomy Laboratory Practical Examinations
ERIC Educational Resources Information Center
Krippendorf, Beth B.; Bolender, David L.; Kolesari, Gary L.
2008-01-01
At the Medical College of Wisconsin, a procedure was developed to allow computerized grading and grade reporting of laboratory practical examinations in the Clinical Human Anatomy course. At the start of the course, first year medical students were given four Lists of Structures. On these lists, numbered items were arranged alphabetically; the…
Are Grade Expectations Rational? A Classroom Experiment
ERIC Educational Resources Information Center
Hossain, Belayet; Tsigaris, Panagiotis
2015-01-01
This study examines students' expectations about their final grade. An attempt is made to determine whether students form expectations rationally. Expectations in economics, rational or otherwise, carry valuable information and have important implications in terms of both teaching effectiveness and the role of grades as an incentive structure for…
Fifth Grade Elementary Students' Conceptions of Earthquakes
ERIC Educational Resources Information Center
Savasci, Funda; Uluduz, Hatice
2013-01-01
This study intends to investigate the fifth grade students' conceptions of earthquakes. Twenty two grade 5 students (11-12 years old) from five different elementary schools in Istanbul voluntarily participated in the study. Data were collected from semi-structured interviews with each participant. Six interview questions were designed by…
NASA Technical Reports Server (NTRS)
Xiao, Yegao; Bhat, Ishwara; Abedin, M. Nurul
2005-01-01
InP/InGaAs avalanche photodiodes (APDs) are being widely utilized in optical receivers for modern long haul and high bit-rate optical fiber communication systems. The separate absorption, grading, charge, and multiplication (SAGCM) structure is an important design consideration for APDs with high performance characteristics. Time domain modeling techniques have been previously developed to provide better understanding and optimize design issues by saving time and cost for the APD research and development. In this work, performance dependences on multiplication layer thickness have been investigated by time domain modeling. These performance characteristics include breakdown field and breakdown voltage, multiplication gain, excess noise factor, frequency response and bandwidth etc. The simulations are performed versus various multiplication layer thicknesses with certain fixed values for the areal charge sheet density whereas the values for the other structure and material parameters are kept unchanged. The frequency response is obtained from the impulse response by fast Fourier transformation. The modeling results are presented and discussed, and design considerations, especially for high speed operation at 10 Gbit/s, are further analyzed.
Analysis of online patient education materials in pediatric ophthalmology.
John, Ann M; John, Elizabeth S; Hansberry, David R; Thomas, Prashant J; Guo, Suqin
2015-10-01
Patients increasingly consult online resources for healthcare information. The American Medical Association (AMA) and National Institutes of Health (NIH) recommend that online education resources be written between a 3rd- and 7th-grade level. This study assesses whether online health information abides by these guidelines. Ten pediatric ophthalmology conditions were entered into a commonly used search engine, Google.com, and analyzed using 10 validated readability scales. Scientific articles and articles written on patient forums were excluded. The 10 conditions--amblyopia, cataract, conjunctivitis, corneal abrasion, nystagmus, retinoblastoma, retinopathy of prematurity, strabismus, stye, and glaucoma--were also searched and analyzed separately from widely used websites, including Wikipedia and WebMD, as well as those of professional societies, including the American Association for Pediatric Ophthalmology and Strabismus (AAPOS) and the American Optometric Association (AOA). The majority of articles were written above recommended guidelines. All scales showed that the 100 articles were written at a mean grade-level of 11.75 ± 2.72. Only 12% of articles were written below a 9th-grade level and only 3% met recommended criteria. The articles accrued separately from Wikipedia, WebMD, AAPOS, and AOA also had average grade levels above the recommended guidelines. The readability of online patient education material exceeds NIH and AMA guidelines. This disparity can adversely affect caregiver comprehension of such resources and contribute to poor decision making. Pediatric ophthalmology online articles are generally written at a level too high for average caregiver comprehension. Revision of articles can increase satisfaction, improve outcomes, and facilitate the patient-ophthalmologist relationship. Published by Elsevier Inc.
Tucker, J. D.; Miller, M. K.; Young, G. A.
2015-04-01
Duplex stainless steels are desirable for use in power generation systems due to their attractive combination of strength, corrosion resistance, and cost. However, thermal embrittlement at intermediate homologous temperatures of ~887°F (475°C) and below, via spinodal decomposition, limits upper service temperatures for many applications. New lean grade duplex alloys have improved thermal stability over standard grades and potentially increase the upper service temperature or the lifetime at a given temperature for this class of material. The present work compares the thermal stability of lean grade, alloy 2003 to standard grade, alloy 2205, through a series of isothermal agings between 500°Fmore » (260°C) and 900°F (482°C) for times between 1 and 10,000 hours. Aged samples were characterized by changes in microhardness and impact toughness. Additionally, atom probe tomography was performed to illustrate the evolution of the α-α' phase separation in both alloys at select conditions. Atom probe tomography confirmed that phase separation occurs via spinodal decomposition for both alloys and identified the formation of Ni-Cu-Si-Mn-P clusters in alloy 2205 that may contribute to embrittlement of this alloy. The impact toughness model predictions for upper service temperature show that alloy 2003 can be considered for use in 550°F applications for 80 year service lifetimes based on a Charpy V-notch criteria of 35 ft-lbs at 70°F. Alloy 2205 should be limited to 500°F applications.« less
Using the Text Structures of Information Books to Teach Writing in the Primary Grades
ERIC Educational Resources Information Center
Clark, Sarah K.; Jones, Cindy D.; Reutzel, D. Ray
2013-01-01
Teaching children in the primary grades the text structures and features used by authors of information text has been shown to improve comprehension of information texts and provide the scaffolding and support these children need in order to write their own information texts. As teachers implement the "English Language Arts Common Core State…
2004 Defense Economics Conference: Informing the Debate on Military Compensation
2004-12-01
what it takes to put together a human resource strategy that will work in the future. My studies of Gen X and Y and the millenials —which leaders...different grade structure. The laborers are gone, that pyramid with the wide bottom with the laborers. Now we have a more grade- rich structure. That
ERIC Educational Resources Information Center
Wijekumar, Kausalai; Meyer, Bonnie J. F.; Lei, Pui-Wa; Lin, Yu-Chu; Johnson, Lori A.; Spielvogel, James A.; Shurmatz, Kathryn M.; Ray, Melissa; Cook, Michael
2014-01-01
This article reports on a large scale randomized controlled trial to study the efficacy of a web-based intelligent tutoring system for the structure strategy designed to improve content area reading comprehension. The research was conducted with 128 fifth-grade classrooms within 12 school districts in rural and suburban settings. Classrooms within…
ERIC Educational Resources Information Center
Solano-Flores, Guillermo; Barnett-Clarke, Carne; Kachchaf, Rachel R.
2013-01-01
We examined the performance of English language learners (ELLs) and non-ELLs on Grade 4 and Grade 5 mathematics content knowledge (CK) and academic language (AL) tests. CK and AL items had different semiotic loads (numbers of different types of semiotic features) and different semiotic structures (relative frequencies of different semiotic…
Structural Equation Modeling of Retention and Overage Effects on Dropping Out of School.
ERIC Educational Resources Information Center
Grissom, James B.; Shepard, Lorrie A.
This study addresses the effect that grade retention has on dropping out of school. A structural model was developed to test the effect of grade retention on dropping out while controlling for the effects of other possible mediating variables, especially achievement. This model with slight modifications was applied across four different school…
Structural Validity of CLASS K-3 in Primary Grades: Testing Alternative Models
ERIC Educational Resources Information Center
Sandilos, Lia E.; Shervey, Sarah Wollersheim; DiPerna, James C.; Lei, Puiwa; Cheng, Weiyi
2017-01-01
This study examined the internal structure of the Classroom Assessment Scoring System (CLASS; K-3 version). The original CLASS K-3 model (Pianta, La Paro, & Hamre, 2008) and 5 alternative models were tested using confirmatory factor analysis with a sample of first- and second-grade classrooms (N = 141). Findings indicated that a slightly…
ERIC Educational Resources Information Center
CRAWFORD, ROBERT C.; KEISLAR, EVAN R.
THE MAJOR PROBLEM OF THIS INVESTIGATION WAS TO DETERMINE TO WHAT EXTENT FIRST-GRADE PUPILS ARE CAPABLE OF LEARNING ALGEBRAIC STRUCTURES THROUGH PROGRAMED INSTRUCTION. IN THE EXPERIMENT APPROXIMATELY 130 FIRST-GRADERS WERE INSTRUCTED THROUGH AUDIOVISUAL TEACHING MACHINES FOR APPROXIMATELY 15 WEEKS. AT THE END OF THE PROGRAM, THE CHILDREN WERE…
Sarvar, Mojtaba; Salarirad, Mohammad Mehdi; Shabani, Mohammad Amin
2015-11-01
In this paper, a novel mechanical process is proposed for enriching metal content of computer Printed Circuit Boards (PCBs). The PCBs are crushed and divided into three different size fractions namely: -0.59, +0.59 to 1.68 and +1.68 mm. Wet jigging and froth flotation methods are selected for metal enrichment. The coarse size fraction (+1.68 mm) is processed by jigging. The plastic free product is grinded and screened. The oversized product is separated as the first concentrate. It was rich of metal because the grinding process was selective. The undersized product is processed by froth flotation. Based on the obtained results, the middle size fraction (+0.59 to 1.68 mm) and the small size fraction (-0.59 mm) are processed by wet jigging and froth flotation respectively. The wet jigging process is optimized by investigating the effect of pulsation frequency and water flow rate. The results of examining the effect of particle size, solid to liquid ratio, conditioning time and using apolar collector showed that collectorless flotation is a promising method for separating nonmetals of PCBs. 95.6%, 97.5% and 85% of metal content of coarse size, middle size and small size fraction are recovered. The grades of obtained concentrates were 63.3%, 92.5% and 75% respectively. The total recovery is calculated as 95.64% and the grade of the final concentrate was 71.26%. Determining the grade of copper and gold in the final product reveals that 4.95% of copper and 24.46% of gold are lost during the concentration. The major part of the lost gold is accumulated in froth flotation tail. Copyright © 2015 Elsevier Ltd. All rights reserved.
Gido, Ben; Friedler, Eran; Broday, David M
2016-08-02
An innovative atmospheric moisture harvesting system is proposed, where water vapor is separated from the air prior to cooling and condensation. The system was studied using a model that simulates its three interconnected cycles (air, desiccant, and water) over a range of ambient conditions, and optimal configurations are reported for different operation conditions. Model results were compared to specifications of commercial atmospheric moisture harvesting systems and found to represent saving of 5-65% of the electrical energy requirements due to the vapor separation process. We show that the liquid desiccant separation stage that is integrated into atmospheric moisture harvesting systems can work under a wide range of environmental conditions using low grade or solar heating as a supplementary energy source, and that the performance of the combined system is superior.
Yan, Zhi; Zaman, Mostafa; Jiang, Liying
2011-01-01
In this work, the problem of a curved functionally graded piezoelectric (FGP) actuator with sandwich structure under electrical and thermal loads is investigated. The middle layer in the sandwich structure is functionally graded with the piezoelectric coefficient g31 varying continuously along the radial direction of the curved actuator. Based on the theory of linear piezoelectricity, analytical solutions are obtained by using Airy stress function to examine the effects of material gradient and heat conduction on the performance of the curved actuator. It is found that the material gradient and thermal load have significant influence on the electroelastic fields and the mechanical response of the curved FGP actuator. Without the sacrifice of actuation deflection, smaller internal stresses are generated by using the sandwich actuator with functionally graded piezoelectric layer instead of the conventional bimorph actuator. This work is very helpful for the design and application of curved piezoelectric actuators under thermal environment. PMID:28824130
ERIC Educational Resources Information Center
Wolf, Walter A., Ed.
1978-01-01
Reported here are brief descriptions of a common grading and scaling formula for large multi-section courses, an ion exchange amino acid separation and thin layer chromatography identification experiment, a conservation of energy demonstration, a catalyst for synthesizing esters from fatty aids, and an inexpensive method for preparing platinum…
Distillation combined with molecular sieve dehydration is the current state of the art for fuel grade ethanol production from fermentation broths. To improve the sustainability of bioethanol production, energy efficient separation alternatives are needed, particularly for lower ...
ERIC Educational Resources Information Center
Lawrence Unified School District 497, KS.
The elementary level career education instructional materials are arranged by grade level. Separate sections are devoted to each level and include an overview of the curriculum with objectives, activities, and resources (speakers, on-site visits, audio visuals, books, and kits) for each subject area covered. Emphasizing career awareness, each…
Maurya, Anupam; Gupta, Shikha; Srivastava, Santosh K
2013-01-01
pH-zone-refining centrifugal partition chromatography was successively applied in the large-scale separation of close R(f) antipsychotic indole alkaloids directly from CHCl(3) fraction of Rauwolfia tetraphylla leaves. Two experiments with increasing mass from 500 mg to 3 g of crude alkaloid extracts (1C) of R. tetraphylla were carried out in normal-displacement mode using a two-phase solvent system composed of methyl tert-butyl ether/ACN/water (4:1:5, v/v/v) where HCl (12 mM) was added to the lower aqueous stationary phase as a retainer and triethylamine (5 mM) to the organic mobile phase as an eluter. The two centrifugal partition chromatography separations afforded a total of 162.6 mg of 10-methoxytetrahydroalstonine (1) and 296.5 mg of isoreserpiline (2) in 97% and 95.5% purity, respectively, along with a 400.9 mg mixture of α-yohimbine and reserpiline (3 and 4). Further, this mixture was resolved over medium pressure LC using TLC grade silica gel H (average particle size 10 μm), which afforded 160.4 mg of α-yohimbine (3) and 150.2 mg of reserpiline (4) in >95% purities. The purity of the isolated antipsychotic alkaloids was analyzed by high-performance LC and their structures were characterized on the basis of their 1D, 2D NMR and electrospray ionization-mass spectroscopic data. © 2012 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.
NASA Technical Reports Server (NTRS)
Dickson, C. R.; Gould, R. K.; Felder, W.
1981-01-01
High temperature reactions of silicon halides with alkali metals for the production of solar grade silicon are described. Product separation and collection processes were evaluated, measure heat release parameters for scaling purposes and effects of reactants and/or products on materials of reactor construction were determined, and preliminary engineering and economic analysis of a scaled up process were made. The feasibility of the basic process to make and collect silicon was demonstrated. The jet impaction/separation process was demonstrated to be a purification process. The rate at which gas phase species from silicon particle precursors, the time required for silane decomposition to produce particles, and the competing rate of growth of silicon seed particles injected into a decomposing silane environment were determined. The extent of silane decomposition as a function of residence time, temperature, and pressure was measured by infrared absorption spectroscopy. A simplistic model is presented to explain the growth of silicon in a decomposing silane enviroment.
Silicon halide-alkali metal flames as a source of solar grade silicon
NASA Technical Reports Server (NTRS)
Olsen, D. B.; Miller, W. J.
1979-01-01
The feasibility of using alkali metal-silicon halide diffusion flames to produce solar-grade silicon in large quantities and at low cost is demonstrated. Prior work shows that these flames are stable and that relatively high purity silicon can be produced using Na + SiCl4 flames. Silicon of similar purity is obtained from Na + SiF4 flames although yields are lower and product separation and collection are less thermochemically favored. Continuous separation of silicon from the byproduct alkali salt was demonstrated in a heated graphite reactor. The process was scaled up to reduce heat losses and to produce larger samples of silicon. Reagent delivery systems, scaled by a factor of 25, were built and operated at a production rate of 0.5 kg Si/h. Very rapid reactor heating rates are observed with wall temperatures reaching greater than 2000 K. Heat release parameters were measured using a cooled stainless steel reactor tube. A new reactor was designed.
The simulation of organic rankine cycle power plant with n-pentane working fluid
NASA Astrophysics Data System (ADS)
Nurhilal, Otong; Mulyana, Cukup; Suhendi, Nendi; Sapdiana, Didi
2016-02-01
In the steam power plant in Indonesia the dry steam from separator directly used to drive the turbin. Meanwhile, brine from the separator with low grade temperature reinjected to the earth. The brine with low grade temperature can be converted indirectly to electrical power by organic Rankine cycle (ORC) methods. In ORC power plant the steam are released from vaporization of organic working fluid by brine. The steam released are used to drive an turbine which in connected to generator to convert the mechanical energy into electric energy. The objective of this research is the simulation ORC power plant with n-pentane as organic working fluid. The result of the simulation for brine temperature around 165°C and the pressure 8.001 bar optained the net electric power around 1173 kW with the cycle thermal efficiency 14.61% and the flow rate of n-pentane around 15.51 kg/s. This result enable to applied in any geothermal source in Indonesia.
Experimental verification of the rainbow trapping effect in adiabatic plasmonic gratings
Gan, Qiaoqiang; Gao, Yongkang; Wagner, Kyle; Vezenov, Dmitri; Ding, Yujie J.; Bartoli, Filbert J.
2011-01-01
We report the experimental observation of a trapped rainbow in adiabatically graded metallic gratings, designed to validate theoretical predictions for this unique plasmonic structure. One-dimensional graded nanogratings were fabricated and their surface dispersion properties tailored by varying the grating groove depth, whose dimensions were confirmed by atomic force microscopy. Tunable plasmonic bandgaps were observed experimentally, and direct optical measurements on graded grating structures show that light of different wavelengths in the 500–700-nm region is “trapped” at different positions along the grating, consistent with computer simulations, thus verifying the “rainbow” trapping effect. PMID:21402936
Nuclear reactor containment structure with continuous ring tunnel at grade
Seidensticker, Ralph W.; Knawa, Robert L.; Cerutti, Bernard C.; Snyder, Charles R.; Husen, William C.; Coyer, Robert G.
1977-01-01
A nuclear reactor containment structure which includes a reinforced concrete shell, a hemispherical top dome, a steel liner, and a reinforced-concrete base slab supporting the concrete shell is constructed with a substantial proportion thereof below grade in an excavation made in solid rock with the concrete poured in contact with the rock and also includes a continuous, hollow, reinforced-concrete ring tunnel surrounding the concrete shell with its top at grade level, with one wall integral with the reinforced concrete shell, and with at least the base of the ring tunnel poured in contact with the rock.
Structured Dialogues among Communities of First Grade Learners.
ERIC Educational Resources Information Center
Palincsar, Annemarie Sullivan; And Others
In an effort to implement a program of reciprocal teaching dialogues, 6 first-grade teachers orally presented third-grade biology lessons to a group of 6 students, most of whom were identified as at risk for academic difficulty. Teachers aimed to teach students ways to approach learning from text and increase students' understanding of biological…
Gender and Grade-Level Comparisons in the Structure of Problem Behaviors among Adolescents
ERIC Educational Resources Information Center
Chun, Heejung; Mobley, Michael
2010-01-01
Based on Jessor's theory (1987) the comparability of a second-order problem behavior model (SPBM) was investigated across gender and grade-level among adolescents. In addition, gender and grade-level differences in problem behavior engagement were addressed examining latent mean differences. Using a sample of 6504 adolescents drawn from the…
An Assessment of Reliability and Validity of a Rubric for Grading APA-Style Introductions
ERIC Educational Resources Information Center
Stellmack, Mark A.; Konheim-Kalkstein, Yasmine L.; Manor, Julia E.; Massey, Abigail R.; Schmitz, Julie Ann P.
2009-01-01
This article describes the empirical evaluation of the reliability and validity of a grading rubric for grading APA-style introductions of undergraduate students. Levels of interrater agreement and intrarater agreement were not extremely high but were similar to values reported in the literature for comparably structured rubrics. Rank-order…
Preparing Teachers to Support Struggling First-Grade Readers
ERIC Educational Resources Information Center
Baker, Bettina
2007-01-01
The purpose of this report is to provide education professors teaching early literacy methods courses with information for beginning teachers to support struggling first-grade readers. This analysis identifies the specific word structures children are expected to know by the end of first grade, and shows the actual learning rates of these…
Kumar, A; Bridgham, R; Potts, M; Gushurst, C; Hamp, M; Passal, D
2001-01-01
To determine consistency of assessment in a new paper case-based structured oral examination in a multi-community pediatrics clerkship, and to identify correctable problems in the administration of examination and assessment process. Nine paper case-based oral examinations were audio-taped. From audio-tapes five community coordinators scored examiner behaviors and graded student performance. Correlations among examiner behaviors scores were examined. Graphs identified grading patterns of evaluators. The effect of exam-giving on evaluators was assessed by t-test. Reliability of grades was calculated and the effect of reducing assessment problems was modeled. Exam-givers differed most in their "teaching-guiding" behavior, and this negatively correlated with student grades. Exam reliability was lowered mainly by evaluator differences in leniency and grading pattern; less important was absence of standardization in cases. While grade reliability was low in early use of the paper case-based oral examination, modeling of plausible effects of training and monitoring for greater uniformity in administration of the examination and assigning scores suggests that more adequate reliabilities can be attained.
Horowitz, Ava D; Bedford, Edward
2017-08-01
Definitions of sexual behavior display a robust hierarchy of agreement regarding whether or not acts should be classed as, for example, sex or virginity loss. The current research offers a theoretical explanation for this hierarchy, proposing that sexual definitions display graded categorical structure, arising from goodness of membership judgments. Moderation of this graded structure is also predicted, with the focus here on how sexual orientation identity affects sexual definitions. A total of 300 18- to 30-year-old participants completed an online survey, rating 18 behaviors for how far each constitutes having "had sex" and virginity loss. Participants fell into one of four groups: heterosexual male or female, gay male or lesbian. The predicted ratings hierarchy emerged, in which bidirectional genital acts were rated significantly higher than unidirectional or nonpenetrative contact, which was in turn rated significantly higher than acts involving no genital contact. Moderation of graded structure was also in line with predictions. Compared to the other groups, the lesbian group significantly upgraded ratings of genital contact that was either unidirectional or nonpenetrative. There was also evidence of upgrading by the gay male sample of anal intercourse ratings. These effects are theorized to reflect group-level variation in experience, contextual perspective, and identity-management. The implications of the findings in relation to previous research are discussed. It is suggested that a graded structure approach can greatly benefit future research into sexual definitions, by permitting variable definitions to be predicted and explained, rather than merely identified.
Kamishima, Tamotsu; Tanimura, Kazuhide; Henmi, Mihoko; Narita, Akihiro; Sakamoto, Fumihiko; Terae, Satoshi; Shirato, Hiroki
2009-05-01
The objective of this study was to assess interobserver uncertainties in power Doppler (PD) examination of the fingers of patients with rheumatoid arthritis (RA), by separating the source of the discrepancy into (1) acquisition of the images and (2) criteria for assessment of the images. Twenty patients who had been diagnosed with RA were enrolled in this study. Ultrasound examinations were performed by one inexperienced and two experienced sonographers. Interobserver variation was measured using a conventional semiquantitative image grading scale. Interobserver variation of the quantitative PD (QPD) index (the summation of the colored pixels in a region of interest) was also assessed. The agreement was higher between the two experienced sonographers (kappa value of 0.8) than between experienced and inexperienced sonographers (kappa value, 0.6-0.7) in the semiquantitative image grading scale. Results suggest that the difference in the assessment on the image grading scale was due more to the difference in the acquisition of the images than to variations in the grading criteria between sonographers. An excellent relationship was noted between the image grading scale and the QPD index for Doppler signal with a Spearman's coefficient of rank correlation of 0.83 (P < 0.0001). Interobserver discrepancies in the image grading and QPD index methods were due more to the difference in the acquisition of the image than to the grading criteria used. The QPD index seems to be as reliable as the image grading scale with reasonable interobserver agreement between experienced sonographers.
Naturally formed graded junction for organic light-emitting diodes
NASA Astrophysics Data System (ADS)
Shao, Yan; Yang, Yang
2003-09-01
In this letter, we report naturally-formed graded junctions (NFGJ) for organic light-emitting diodes (OLEDs). These junctions are fabricated using single thermal evaporation boat loaded with uniformly mixed charge transport and light-emitting materials. Upon heating, materials sublimate sequentially according to their vaporizing temperatures forming the graded junction. Two kinds of graded structures, sharp and shallow graded junctions, can be formed based on the thermal properties of the selected materials. The NFGJ OLEDs have shown excellent performance in both brightness and lifetime compared with heterojunction devices.
Jadidi, Masoud; Båth, Magnus; Nyrén, Sven
2018-04-09
To compare the quality of images obtained with two different protocols with different acquisition time and the influence from image post processing in a chest digital tomosynthesis (DTS) system. 20 patients with suspected lung cancer were imaged with a chest X-ray equipment with tomosynthesis option. Two examination protocols with different acquisition times (6.3 and 12 s) were performed on each patient. Both protocols were presented with two different image post-processing (standard DTS processing and more advanced processing optimised for chest radiography). Thus, 4 series from each patient, altogether 80 series, were presented anonymously and in a random order. Five observers rated the quality of the reconstructed section images according to predefined quality criteria in three different classes. Visual grading characteristics (VGC) was used to analyse the data and the area under the VGC curve (AUC VGC ) was used as figure-of-merit. The 12 s protocol and the standard DTS processing were used as references in the analyses. The protocol with 6.3 s acquisition time had a statistically significant advantage over the vendor-recommended protocol with 12 s acquisition time for the classes of criteria, Demarcation (AUC VGC = 0.56, p = 0.009) and Disturbance (AUC VGC = 0.58, p < 0.001). A similar value of AUC VGC was found also for the class Structure (definition of bone structures in the spine) (0.56) but it could not be statistically separated from 0.5 (p = 0.21). For the image processing, the VGC analysis showed a small but statistically significant advantage for the standard DTS processing over the more advanced processing for the classes of criteria Demarcation (AUC VGC = 0.45, p = 0.017) and Disturbance (AUC VGC = 0.43, p = 0.005). A similar value of AUC VGC was found also for the class Structure (0.46), but it could not be statistically separated from 0.5 (p = 0.31). The study indicates that the protocol with 6.3 s acquisition time yields slightly better image quality than the vender-recommended protocol with acquisition time 12 s for several anatomical structures. Furthermore, the standard gradation processing (the vendor-recommended post-processing for DTS), yields to some extent advantage over the gradation processing/multiobjective frequency processing/flexible noise control processing in terms of image quality for all classes of criteria. Advances in knowledge: The study proves that the image quality may be strongly affected by the selection of DTS protocol and that the vendor-recommended protocol may not always be the optimal choice.
Exploring the Co-development of Reading Fluency and Reading Comprehension: A Twin Study
Little, Callie W.; Hart, Sara A.; Quinn, Jamie M.; Tucker-Drob, Elliot M.; Taylor, Jeanette; Schatschneider, Chris
2016-01-01
The present study explores the co-development of two related but separate reading skills, reading fluency and reading comprehension, across grades 1–4. A bivariate biometric dual change score model was applied to longitudinal data collected from 1784 twin pairs between the ages of 6 and 10 years. Grade 1 skills were influenced by highly overlapping genetic and environmental factors. Growth in both skills was influenced by highly overlapping shared environmental factors. Cross-lagged parameters indicated bidirectional effects, with stronger effects from fluency to comprehension change than from comprehension to fluency change. PMID:27859016
Machine vision system for automated detection of stained pistachio nuts
NASA Astrophysics Data System (ADS)
Pearson, Tom C.
1995-01-01
A machine vision system was developed to separate stained pistachio nuts, which comprise of about 5% of the California crop, from unstained nuts. The system may be used to reduce labor involved with manual grading or to remove aflatoxin contaminated product from low grade process streams. The system was tested on two different pistachio process streams: the bi- chromatic color sorter reject stream and the small nut shelling stock stream. The system had a minimum overall error rate of 14% for the bi-chromatic sorter reject stream and 15% for the small shelling stock stream.
Method of making high breakdown voltage semiconductor device
Arthur, Stephen D.; Temple, Victor A. K.
1990-01-01
A semiconductor device having at least one P-N junction and a multiple-zone junction termination extension (JTE) region which uniformly merges with the reverse blocking junction is disclosed. The blocking junction is graded into multiple zones of lower concentration dopant adjacent termination to facilitate merging of the JTE to the blocking junction and placing of the JTE at or near the high field point of the blocking junction. Preferably, the JTE region substantially overlaps the graded blocking junction region. A novel device fabrication method is also provided which eliminates the prior art step of separately diffusing the JTE region.
Kaufman, D.
1958-04-15
A process of recovering uranium from very low-grade ore residues is described. These low-grade uraniumcontaining hydroxide precipitates, which also contain hydrated silica and iron and aluminum hydroxides, are subjected to multiple leachings with aqueous solutions of sodium carbonate at a pH of at least 9. This leaching serves to selectively extract the uranium from the precipitate, but to leave the greater part of the silica, iron, and aluminum with the residue. The uranium is then separated from the leach liquor by the addition of an acid in sufficient amount to destroy the carbonate followed by the addition of ammonia to precipitate uranium as ammonium diuranate.
Fuel cell system with separating structure bonded to electrolyte
Bourgeois, Richard Scott; Gudlavalleti, Sauri; Quek, Shu Ching; Hasz, Wayne Charles; Powers, James Daniel
2010-09-28
A fuel cell assembly comprises a separating structure configured for separating a first reactant and a second reactant wherein the separating structure has an opening therein. The fuel cell assembly further comprises a fuel cell comprising a first electrode, a second electrode, and an electrolyte interposed between the first and second electrodes, and a passage configured to introduce the second reactant to the second electrode. The electrolyte is bonded to the separating structure with the first electrode being situated within the opening, and the second electrode being situated within the passage.
ERIC Educational Resources Information Center
Prakash, E. S.; Narayan, K. A.; Sethuraman, K. R.
2010-01-01
One method of grading responses of the descriptive type is by using Structure of Observed Learning Outcomes (SOLO) taxonomy. The basis of this study was the expectation that if students were oriented to SOLO taxonomy, it would provide them an opportunity to understand some of the factors that teachers consider while grading descriptive responses…
ERIC Educational Resources Information Center
Meyer, Bonnie J. F.; Wijekumar, Kay; Middlemiss, Wendy; Higley, Kelli; Lei, Pui-Wa; Meier, Catherine; Spielvogel, James
2010-01-01
This study investigated the effects of different versions of Web-based instruction focused on text structure on fifth- and seventh-grade students' reading comprehension. Stratified random assignment was employed in a two-factor experiment embedded within a pretest and multiple posttests design (immediate and four-month delayed posttests). The two…
Cooperative Health Occupation Education (Course Outline), Body Structure and Function II: 8009.09.
ERIC Educational Resources Information Center
Dade County Public Schools, Miami, FL.
GRADES OR AGES: Grade Twelve. SUBJECT MATTER: This is the second part of a two-part course on body structure and function. The subject matter includes organization, composition, and all the systems of the human body. Laboratory experiments related to first aid are also covered. ORGANIZATION AND PHYSICAL APPEARANCE: The guide contains a preface, a…
Examining the Internal Structure of the easyCBM Reading Measures, Grades K-5. Technical Report #1302
ERIC Educational Resources Information Center
Alonzo, Julie; Park, Bitnara Jasmine; Tindal, Gerald
2013-01-01
In this technical report, we describe a study examining the internal structures of the easyCBM reading measures, Grades K-5. Data were gathered from a convenience sample of 114 Kindergarten students, 43 first graders, 82 second graders, 100 third graders, 109 fourth graders, and 71 fifth graders attending schools in Oregon, Georgia, South…
The Concerns and Attitudes of Early Adolescent Middle School Students in Transition.
ERIC Educational Resources Information Center
Sierer, Timothy M.; Winfield, Linda F.
Junior high schools have been blamed for failing to meet the needs of early adolescents. Proponents of the new middle school structure favored moving grade nine to the high school and moving grade five and or six from the elementary school to the new structural organization. The uniqueness of the middle school is in how the philosophy behind this…
Characterizing the graded structure of false killer whale (Pseudorca crassidens) vocalizations.
Murray, S O; Mercado, E; Roitblat, H L
1998-09-01
The vocalizations from two, captive false killer whales (Pseudorca crassidens) were analyzed. The structure of the vocalizations was best modeled as lying along a continuum with trains of discrete, exponentially damped sinusoidal pulses at one end and continuous sinusoidal signals at the other end. Pulse trains were graded as a function of the interval between pulses where the minimum interval between pulses could be zero milliseconds. The transition from a pulse train with no inter-pulse interval to a whistle could be modeled by gradations in the degree of damping. There were many examples of vocalizations that were gradually modulated from pulse trains to whistles. There were also vocalizations that showed rapid shifts in signal type--for example, switching immediately from a whistle to a pulse train. These data have implications when considering both the possible function(s) of the vocalizations and the potential sound production mechanism(s). A short-time duty cycle measure was developed to characterize the graded structure of the vocalizations. A random sample of 500 vocalizations was characterized by combining the duty cycle measure with peak frequency measurements. The analysis method proved to be an effective metric for describing the graded structure of false killer whale vocalizations.
NASA Astrophysics Data System (ADS)
Liang, Wei; Yang, Jijun; Zhang, Feifei; Lu, Chenyang; Wang, Lumin; Liao, Jiali; Yang, Yuanyou; Liu, Ning
2018-04-01
This study investigates the improved irradiation tolerance of reactive gas pulse (RGP) sputtered TiN coatings which has hybrid architecture of multilayered and compositionally graded structures. The multilayered RGP-TiN coating is composed of hexagonal close-packed Ti phase and face-centred cubic TiN phase sublayers, where the former sublayer has a compositionally graded structure and the latter one maintains constant stoichiometric atomic ratio of Ti:N. After 100 keV He ion irradiation, the RGP-TiN coating exhibits improved irradiation resistance compared with its single layered (SL) counterpart. The size and density of He bubbles are smaller in the RGP-TiN coating than in the SL-TiN coating. The irradiation-induced surface blistering of the coatings shows a similar tendency. Meanwhile, the irradiation hardening and adhesion strength of the RGP-TiN coatings were not greatly affected by He irradiation. Moreover, the irradiation damage tolerance of the coatings can be well tuned by changing the undulation period number of N2 gas flow rate. Detailed analysis suggested that this improved irradiation tolerance could be related to the combined contribution of the multilayered and compositionally graded structures.
Configuration of Air Microfluidic Chip for Separating and Grading Respirable Dust
NASA Astrophysics Data System (ADS)
Zhu, Xiaofeng; Jia, Yiting; Sun, Jianhai; Zhao, Peiyue; Liu, Jinhua; Zhang, Yanni; Ning, Zhanwu
2018-03-01
Particulate matter (PM) is a category of airborne pollutants, and fine particles that have a diameter of 2.5 μm (PM2.5) or smaller are especially damaging to human health because of their ability to penetrate deep into our respiratory system, Therefore, Monitoring of PM is very important. In this work, an air micro- fluidic PM sensor based on MEMS was proposed, and numerical model of the sensor was simulated accurately. The sensor was able to separate particles according to their sizes, and then transports and deposits the selected particles using thermophoretic precipitation onto the surface of a microfabricated mass-sensitive film bulk acoustic resonator (FBAR), precisely weighing and providing the concentration of PM. The PM sensor has double stage separation function, and the primary separator can separate the particles with size of less 10 μm from the particles, and the secondary can separate particles with size of less 2.5 μm from the particles.
NASA Astrophysics Data System (ADS)
Lyu, Yuexi; Han, Xi; Sun, Yaoyao; Jiang, Zhi; Guo, Chunyan; Xiang, Wei; Dong, Yinan; Cui, Jie; Yao, Yuan; Jiang, Dongwei; Wang, Guowei; Xu, Yingqiang; Niu, Zhichuan
2018-01-01
We report on the growth of high quality GaSb-based AlInAsSb quaternary alloy by molecular beam epitaxy (MBE) to fabricate avalanche photodiodes (APDs). By means of high resolution X-ray diffraction (HRXRD) and scanning transmission electron microscope (STEM), phase separation phenomenon of AlInAsSb random alloy with naturally occurring vertical superlattice configuration was demonstrated. To overcome the tendency for phase segregation while maintaining a highly crystalline film, a digital alloy technique with migration-enhanced epitaxy growth method was employed, using a shutter sequence of AlSb, AlAs, AlSb, Sb, In, InAs, In, Sb. AlInAsSb digital alloy has proved to be reproducible and consistent with single phase, showing sharp satellite peaks on HRXRD rocking curve and smooth surface morphology under atomic force microscopy (AFM). Using optimized digital alloy, AlInAsSb separate absorption, grading, charge, and multiplication (SAGCM) APD was grown and fabricated. At room temperature, the device showed high performance with low dark current density of ∼14.1 mA/cm2 at 95% breakdown and maximum stable gain before breakdown as high as ∼200, showing the potential for further applications in optoelectronic devices.
NASA Astrophysics Data System (ADS)
Deierling, Phillip Eugene
Airframes operating in the hypersonic regime are subjected to complex structural and thermal loads. Structural loads are a result of aggressive high G maneuvers, rapid vehicle acceleration and deceleration, and dynamic pressure, while thermal loads are a result of aerodynamic heating. For such airframes, structural members are typically constructed from steel, titanium and nickel alloys. However, with most materials, rapid elevations in temperature lead to undesirable changes in material properties. In particular, reductions in strength and stiffness are observed, along with an increase in thermal conductivity, specific heat and thermal expansion. Thus, hypersonic airframes are typically designed with external insulation, active cooling or a thermal protection system (TPS) added to the structure to protect the underling material from the effects of temperature. Such thermal protection may consist of adhesively bonded, pinned, and bolted thermal protection layers over exterior panels. These types of attachments create abrupt changes in thermal expansion and stiffness that make the structure susceptible to cracking and debonding as well as adding mass to the airframe. One of the promising materials concepts for extreme environments that was introduced in the past is the so-called Spatially Tailored Advanced Thermal Structures (STATS). The concept of STATS is rooted in functionally graded materials (FGMs), in which a directional variation of material properties exists. These materials are essentially composites and consist of two or more phases of distinct materials in which the volume fractions of each phase continuously change in space. Here, the graded material will serve a dual-purpose role as both the structural/skin member and thermal management with the goal of reducing the weight of the structure while maintaining structural soundness. This is achieved through the ability to tailor material properties to create a desired or enhanced thermomechanical response through spatial variation (e.g. grading). The objective of this study is to present a computational framework for modeling and evaluating the thermomechanical response of STATS and FGMs for highly maneuverable hypersonic (Mach > 5) airframes. To meet the objective of this study, four key steps have been defined to study the thermomechanical response of such materials in extreme environments. They involve: (1) modeling of graded microstructures; (2) validation of analytical and numerical modeling techniques for graded microstructures; (3) determination of effective properties of variable composition composites; (4) parametric studies to evaluate the performance of FGMs for use in the hypersonic operating environment; (5) optimization of the material spatial grading in hypersonic panels aiming to improve the thermomechanical performance. Modeling of graded microstructures, representing particulate reinforced FGMs, has been accomplished using power law distribution functions to specify the spatial variation of the constituents. Artificial microstructures consisting of disks and spheres have been generated using developed algorithms. These algorithms allow for the creation of dense packing fractions up to 0.61 and 0.91 for 2D and 3D geometry, respectively. Effective properties of FGMs are obtained using micromechanics models and finite element analysis of representative volume elements (RVEs). Two approaches have been adopted and compared to determine the proper RVE for materials with graded microstructures. In the first approach, RVEs are generated by considering regions that have a uniform to slow variation in material composition (i.e., constant volume fraction), resulting in statistically homogenous piecewise RVEs of the graded microstructure neglecting interactions from neighboring cells. In the second approach, continuous RVEs are generated by considering the entire FGM. Here it is presumed that modeling of the complete variation in a microstructure may influence the surrounding layers due to the interactions of varying material composition, particularly when there is a steep variation in material composition along the grading direction. To determine these effects of interlayer interactions, FGM microstructures were generated using three different types of material grading functions, linear, quadratic and square root, providing uniform, gradual and steep variations, respectively. Two- and three-dimensional finite element analysis was performed to determine the effective temperature-dependent material properties of the composite over a wide temperature range. The outcome of the computational analysis show that the similar effective properties are obtained by each of the modeling approaches. Furthermore, the obtained computational results for effective elastic, thermal, and thermal expansion properties are consistent with the known analytical bounds. Resulting effective temperature-dependent material properties were used to evaluate the time-dependent thermostructural response and effectiveness of FGM structural panels. Structural panels are subjected to time- and spatial-dependent thermal and mechanical loads resulting from hypersonic flight over a representative trajectory. Mechanical loads are the by-product of aggressive maneuvering at high air speeds and angles of attack. Thermal loads as a result of aerodynamic heating are applied to the material systems as laminar, turbulent and transitional heat flux on the outer surface. Laminar and turbulent uniform heat fluxes are used to evaluate the effectiveness of FGM panels graded in the through-thickness direction only. Transitional heat fluxes are used to evaluate the effectiveness of FGMs graded in two principal directions, e.g., through-thickness and the surface parallel to flow. The computational results indicate that when subjected to uniform surface heat flux, the graded material system can eliminate through-thickness temperature gradients that are otherwise present in traditional thermal protection systems. Furthermore, two-dimensional graded material systems can also eliminate through-thickness temperature gradients and significantly reduce in-plane surface temperature gradients when subjected to non-uniform surface aerodynamic heating.
Carbonate-shelf depositional environments of the Ordovician Viola formation in South-Central Kansas
Newell, K.D.
2000-01-01
The Upper Ordovician Viola Formation, an important petroleum reservoir in the Midcontinent, is a carbonate unit present over much of the subsurface in Kansas. The Viola is composed of two fining-upward sedimentary packages that are separated from each other by a minor karstic surface representing a brief period of exposure. Each package represents a third-order sedimentary cycle and consists of an echinoderm-rich packstone overlain by a thicker lime mudstone. The echinoderm-rich packstone was deposited nearshore in agitated waters, but subsequently was bioturbated. The overlying lime mudstone was deposited in deeper, quiet waters, and locally contains storm-deposited carbonate sands. Subtle growth of the Central Kansas Arch and Pratt Anticline (structures transecting the depositional shelf) is indicated by packstones and grainstones being thicker over these arches, whereas finer grained lithologies dominate in basinal areas on the arch flanks. Structureless lime mudstones, probably intensely bioturbated, grade into laminated lime mudstones farther basinward.
NASA Astrophysics Data System (ADS)
Zhou, Xin; Xiao, Dingbang; Wu, Xuezhong; Li, Qingsong; Hou, Zhanqiang; He, Kaixuan; Wu, Yulie
2017-12-01
This paper reports an alternative design strategy to reduce thermoelastic dissipation (TED) for isothermal-mode micromechanical resonators. This involves hanging lumped masses on a frame structure to decouple the resonant frequency and the effective beamwidth of the resonators, which enables the separation of the thermal relaxation rate and frequency of vibration. This approach is validated using silicon-based micromechanical disklike resonators engineered to isolate TED. A threefold improvement in the quality factor and a tenfold improvement in the decay-time constant is demonstrated. This work proposes a solution for isothermal-mode (flexural) micromechanical resonators to effectively mitigate TED. Specifically, this approach is ideal for designing high-performance gyroscope resonators based on microelectromechanical systems (MEMS) technology. It may pave the way for the next generation inertial-grade MEMS gyroscope, which remains a great challenge and is very appealing.
Koenderink, Jan J; van Doorn, Andrea J; Wagemans, Johan
2011-01-01
Depth is the feeling of remoteness, or separateness, that accompanies awareness in human modalities like vision and audition. In specific cases depths can be graded on an ordinal scale, or even measured quantitatively on an interval scale. In the case of pictorial vision this is complicated by the fact that human observers often appear to apply mental transformations that involve depths in distinct visual directions. This implies that a comparison of empirically determined depths between observers involves pictorial space as an integral entity, whereas comparing pictorial depths as such is meaningless. We describe the formal structure of pictorial space purely in the phenomenological domain, without taking recourse to the theories of optics which properly apply to physical space-a distinct ontological domain. We introduce a number of general ways to design and implement methods of geodesy in pictorial space, and discuss some basic problems associated with such measurements. We deal mainly with conceptual issues.
NASA Astrophysics Data System (ADS)
Pillai, Shilpa Patil; Pande, Kanchan; Kale, Vivek S.
2018-04-01
The Kaladgi Basin on the northern edge of the Dharwar craton has characters diverse from the other epicratonic Purana basins of Peninsular India. Sedimentological studies in the basin have established the presence of three cycles of flooding separated by an event of intra-basinal deformation accompanied by low grade incipient metamorphism. The overall structural configuration of the basin indicates its development by supracrustal extension accompanied by shearing in a trans-tensional regime during the Mesoproterozoic. This was followed by sagging that yielded Neoproterozoic sedimentation in a successor nested basin. ^{40}Ar/^{39}Ar dating of an intrusive mafic dyke along the axial plane of a fold has yielded a plateau age of 1154{± }4 Ma. This helps constraint the age of the various events during the evolution of this basin.
Gygi, Jasmin T.; Hagmann-von Arx, Priska; Schweizer, Florine; Grob, Alexander
2017-01-01
Intelligence is considered the strongest single predictor of scholastic achievement. However, little is known regarding the predictive validity of well-established intelligence tests for school grades. We analyzed the predictive validity of four widely used intelligence tests in German-speaking countries: The Intelligence and Development Scales (IDS), the Reynolds Intellectual Assessment Scales (RIAS), the Snijders-Oomen Nonverbal Intelligence Test (SON-R 6-40), and the Wechsler Intelligence Scale for Children (WISC-IV), which were individually administered to 103 children (Mage = 9.17 years) enrolled in regular school. School grades were collected longitudinally after 3 years (averaged school grades, mathematics, and language) and were available for 54 children (Mage = 11.77 years). All four tests significantly predicted averaged school grades. Furthermore, the IDS and the RIAS predicted both mathematics and language, while the SON-R 6-40 predicted mathematics. The WISC-IV showed no significant association with longitudinal scholastic achievement when mathematics and language were analyzed separately. The results revealed the predictive validity of currently used intelligence tests for longitudinal scholastic achievement in German-speaking countries and support their use in psychological practice, in particular for predicting averaged school grades. However, this conclusion has to be considered as preliminary due to the small sample of children observed. PMID:28348543
Multi-class SVM model for fMRI-based classification and grading of liver fibrosis
NASA Astrophysics Data System (ADS)
Freiman, M.; Sela, Y.; Edrei, Y.; Pappo, O.; Joskowicz, L.; Abramovitch, R.
2010-03-01
We present a novel non-invasive automatic method for the classification and grading of liver fibrosis from fMRI maps based on hepatic hemodynamic changes. This method automatically creates a model for liver fibrosis grading based on training datasets. Our supervised learning method evaluates hepatic hemodynamics from an anatomical MRI image and three T2*-W fMRI signal intensity time-course scans acquired during the breathing of air, air-carbon dioxide, and carbogen. It constructs a statistical model of liver fibrosis from these fMRI scans using a binary-based one-against-all multi class Support Vector Machine (SVM) classifier. We evaluated the resulting classification model with the leave-one out technique and compared it to both full multi-class SVM and K-Nearest Neighbor (KNN) classifications. Our experimental study analyzed 57 slice sets from 13 mice, and yielded a 98.2% separation accuracy between healthy and low grade fibrotic subjects, and an overall accuracy of 84.2% for fibrosis grading. These results are better than the existing image-based methods which can only discriminate between healthy and high grade fibrosis subjects. With appropriate extensions, our method may be used for non-invasive classification and progression monitoring of liver fibrosis in human patients instead of more invasive approaches, such as biopsy or contrast-enhanced imaging.
Study on Separation of Structural Isomer with Magneto-Archimedes method
NASA Astrophysics Data System (ADS)
Kobayashi, T.; Mori, T.; Akiyama, Y.; Mishima, F.; Nishijima, S.
2017-09-01
Organic compounds are refined by separating their structural isomers, however each separation method has some problems. For example, distillation consumes large energy. In order to solve these problems, new separation method is needed. Considering organic compounds are diamagnetic, we focused on magneto-Archimedes method. With this method, particle mixture dispersed in a paramagnetic medium can be separated in a magnetic field due to the difference of the density and magnetic susceptibility of the particles. In this study, we succeeded in separating isomers of phthalic acid as an example of structural isomer using MnCl2 solution as the paramagnetic medium. In order to use magneto-Archimedes method for separating materials for food or medicine, we proposed harmless medium using oxygen and fluorocarbon instead of MnCl2 aqueous solution. As a result, the possibility of separating every structural isomer was shown.
Otto, Benjamin; Gruner, Katharina; Heinlein, Christina; Wegwitz, Florian; Nollau, Peter; Ylstra, Bauke; Pantel, Klaus; Schumacher, Udo; Baumbusch, Lars O; Martin-Subero, José Ignacio; Siebert, Reiner; Wagener, Christoph; Streichert, Thomas; Deppert, Wolfgang; Tolstonog, Genrich V
2013-03-15
Mammary carcinomas developing in SV40 transgenic WAP-T mice arise in two distinct histological phenotypes: as differentiated low-grade and undifferentiated high-grade tumors. We integrated different types of information such as histological grading, analysis of aCGH-based gene copy number and gene expression profiling to provide a comprehensive molecular description of mammary tumors in WAP-T mice. Applying a novel procedure for the correlation of gene copy number with gene expression on a global scale, we observed in tumor samples a global coherence between genotype and transcription. This coherence can be interpreted as a matched transcriptional regulation inherited from the cells of tumor origin and determined by the activity of cancer driver genes. Despite common recurrent genomic aberrations, e.g. gain of chr. 15 in most WAP-T tumors, loss of chr. 19 frequently occurs only in low-grade tumors. These tumors show features of "basal-like" epithelial differentiation, particularly expression of keratin 14. The high-grade tumors are clearly separated from the low-grade tumors by strong expression of the Met gene and by coexpression of epithelial (e.g. keratin 18) and mesenchymal (e.g. vimentin) markers. In high-grade tumors, the expression of the nonmutated Met protein is associated with Met-locus amplification and Met activity. The role of Met as a cancer driver gene is supported by the contribution of active Met signaling to motility and growth of mammary tumor-derived cells. Finally, we discuss the independent origin of low- and high-grade tumors from distinct cells of tumor origin, possibly luminal progenitors, distinguished by Met gene expression and Met signaling. Copyright © 2012 UICC.
Electron Beam Freeform Fabrication of Titanium Alloy Gradient Structures
NASA Technical Reports Server (NTRS)
Brice, Craig A.; Newman, John A.; Bird, Richard Keith; Shenoy, Ravi N.; Baughman, James M.; Gupta, Vipul K.
2014-01-01
Historically, the structural optimization of aerospace components has been done through geometric methods. A monolithic material is chosen based on the best compromise between the competing design limiting criteria. Then the structure is geometrically optimized to give the best overall performance using the single material chosen. Functionally graded materials offer the potential to further improve structural efficiency by allowing the material composition and/or microstructural features to spatially vary within a single structure. Thus, local properties could be tailored to the local design limiting criteria. Additive manufacturing techniques enable the fabrication of such graded materials and structures. This paper presents the results of a graded material study using two titanium alloys processed using electron beam freeform fabrication, an additive manufacturing process. The results show that the two alloys uniformly mix at various ratios and the resultant static tensile properties of the mixed alloys behave according to rule-of-mixtures. Additionally, the crack growth behavior across an abrupt change from one alloy to the other shows no discontinuity and the crack smoothly transitions from one crack growth regime into another.
Recovery of ammonia and production of high-grade phosphates from digester effluents
USDA-ARS?s Scientific Manuscript database
Conservation and recovery of nitrogen and phosphorus from animal wastes and municipal effluents is important because of economic and environmental reasons. In this paper we present a novel technology for separation and recovery of ammonia and phosphorus from liquid swine manure. Phosphorus recovery ...
DOT National Transportation Integrated Search
2014-09-01
The concept of Automated Transit Networks (ATN) - in which fully automated vehicles on exclusive, grade-separated guideways : provide on-demand, primarily non-stop, origin-to-destination service over an area network has been around since the 1950...
Life Lab Computer Support System's Manual.
ERIC Educational Resources Information Center
Lippman, Beatrice D.; Walfish, Stephen
Step-by-step procedures for utilizing the computer support system of Miami-Dade Community College's Life Lab program are described for the following categories: (1) Registration--Student's Lists and Labels, including three separate computer programs for current listings, next semester listings, and grade listings; (2) Competence and Resource…
Environmental Awareness: Just a Pane of Glass Away.
ERIC Educational Resources Information Center
Kopchynski, Kevin
1982-01-01
Highlights several basic ecological principles and suggests corresponding classroom activities for grades five to eight that revolve around a freshwater aquarium. Basic ecological concepts, adaptations, characteristics of aquatic habitats, and pollution problems are outlined in separate tables. A short list of resource materials is included.…
Alcohol Education: Curriculum Guide for Grades K-6.
ERIC Educational Resources Information Center
New York State Education Dept., Albany. Bureau of Drug Education.
This alcohol curriculum guide was designed to assist school personnel to more effectively combat the alcohol problem through education as a primary prevention vehicle. "Practice experiences" comprise the most important components of the elementary health education curriculum for decision making. There are units with separate sections at…
Characteristics of early spelling of children with Specific Language Impairment.
Cordewener, Kim A H; Bosman, Anna M T; Verhoeven, Ludo
2012-01-01
The present study investigated active grapheme knowledge and early spelling of 59 first grade children with Specific Language Impairment (SLI). Speed, nature, and knowledge transfer of spelling acquisition were taken into account. Four orthographic characteristics that influence early spelling, namely, 'Type of Grapheme', 'Grapheme Position', 'Number of Graphemes', and 'Word Structure' were examined at the middle and at the end of first grade. At the beginning of first grade when children were between 71 and 97 months, they performed well below national norms on assessment of active grapheme knowledge. The delay in word spelling persisted, but decreased between the middle and the end of first grade. Despite this delay, the findings suggest that characteristics of early spelling for children with SLI are rather similar to those of children with typical language development. For example, children with SLI represented more graphemes at the end of first grade than at the middle of first grade, found it easier to represent the initial grapheme in words than the final or medial grapheme (Grapheme Position), were more successful spelling shorter than longer words (Number of Graphemes), and spelled words with simple structures (CVC) more accurately than those with complex structures (CVCC and CCVC; Word Structure). Finally, participants demonstrated that they can use known graphemes to spell words, but the transfer between active grapheme knowledge and word spelling was not always stable. As a result of this activity, readers will be able to explain the speed and the nature of spelling acquisition of children with SLI. As a result of this activity, readers will be able to explain what skills are most important for teachers to practice with children with SLI to improve the spelling skills of these children. Copyright © 2012 Elsevier Inc. All rights reserved.
Pauly, Stephan; Kraus, Natascha; Greiner, Stefan; Scheibel, Markus
2013-06-01
With increasing numbers of arthroscopically assisted acromioclavicular (AC) joint stabilization procedures has come an increase in reports of concomitant glenohumeral injuries among AC joint separations. The aim of the present study was to evaluate the prevalence, pattern, and cause of glenohumeral pathologies among a large patient population with acute high-grade AC joint instability. A total of 125 patients (13 women, 112 men) with high-grade AC joint dislocation (6 Rockwood II; 119 Rockwood V) underwent diagnostic glenohumeral arthroscopy before AC joint repair. Pathologic lesions were evaluated for acute or degenerative origin and, if considered relevant, treated all-arthroscopically. Concomitant glenohumeral pathologies were found in 38 of 125 patients (30.4%). Analysis of pathogenesis distinguished different patterns of accompanying injuries: acute intra-articular lesions, related to the recent shoulder trauma, were found in 9 patients (7.2%), degenerative lesions, considered to be unrelated to the recent trauma, were found in 18 (14.4%), and 11 (8.8%) had an unclear traumatic correlation (intermediate group). Within the acute and the degenerative group, affected structures were predominantly partial, articular-sided tears of the anterosuperior rotator cuff, including instabilities of the pulley complex, followed by pathologies of the long head of the biceps and superior labrum anteroposterior lesions. The intermediate group presented mainly with articular-sided partial tears of the subscapularis tendon. This prospective study showed a high prevalence (30%) of concomitant glenohumeral pathologies, of which some indicate additional surgical therapy and could be missed by an isolated open AC repair. Hence, the arthroscopic approach for AC joint stabilization allows for the diagnosis and treatment of associated intra-articular pathologies. Copyright © 2013 Journal of Shoulder and Elbow Surgery Board of Trustees. Published by Mosby, Inc. All rights reserved.
NASA Astrophysics Data System (ADS)
Giannetti, Bernardino
1998-01-01
This paper describes the 232 ka B.P. MTTT trachyte-trachyandesite pyroclastic succession of Roccamonfina volcano. This small-volume, proximal sequence crops out along Mulino di Sotto, Paratone, and Pisciariello ravines in the southwest sector of the central caldera, and covers a minimum extent of 3.5 km 2 area. It is made up of seven pyroclastic flows and pyroclastic surge units consisting of trachytic ash matrix containing juvenile trachyandesitic scoria and dense lava fragments, pumice clasts of uncertain trachyandesite, and a foreign trachyandesitic lithic facies. Two stratigraphic markers allow correlation of the units. No paleosoils and Plinian fallout have been observed at the base and within the succession. Some lateral grading of scoria and lithic clasts suggests that MTTT derived from three distinct source vents. The sequence consists of a basal ash flow passing laterally to laminated surge deposits (Unit A). This is overlain by a reversely graded scoria and pumice lapilli flow (Unit B) which is in turn overlain by a thinly cross-stratified scoria lapilli surge (Unit C). Unit C is capped by a prominent ash-and-scoria flow (Unit D). A ground layer (Marker MK1) divides Unit D from a massive ignimbrite which grades upcurrent to sand-wave surge deposits (Unit E). Another ground layer (Marker MK2) separates Unit E from Unit F. This unit consists of a basal ignimbrite passing laterally to bedded surge deposits with convolute structures (subunit Fl), and grading upcurrent to a subhorizontally plane-laminated ash cloud (subunit F2) containing near the top a layer of millimetric lithic clasts embedded in fine ash. The succession is closed by the pyroclastic flow Unit G. Surge Unit C can be interpreted in terms of vertical gradients in turbulence, particle concentration, and velocity during flowage, whereas the bedded surge parts present in the massive deposits of Units A and E-F1 can be related to abrupt changes of velocity down the steep slopes of ravines. Reverse grading in Unit B is probably due to grain dispersive pressures. The convolute structures within Fl are related to zones of diagenetic cementation associated with groundwater. Finally, the laminated, fine-grained nature of subunit F2 is interpreted as due to ash clouds elutriated from the basal part of Unit F. Stratigraphic markers MK1-MK2 are ground layer breccias formed by settling of lithic and scoria clasts from overlying units E and F, respectively. Vesiculation and morphologies of glass shards of the MTTT succession suggest that eruptions were essentially driven by magmatic explosions which had an appreciable hydromagmatic component.
Early childhood precursors and adolescent sequelae of grade school peer rejection and victimization.
Bierman, Karen L; Kalvin, Carla B; Heinrichs, Brenda S
2015-01-01
This study examined the early childhood precursors and adolescent outcomes associated with grade school peer rejection and victimization among children oversampled for aggressive-disruptive behaviors. A central goal was to better understand the common and unique developmental correlates associated with these two types of peer adversity. There were 754 participants (46% African American, 50% European American, 4% other; 58% male; average age=5.65 at kindergarten entry) followed into seventh grade. Six waves of data were included in structural models focused on three developmental periods. Parents and teachers rated aggressive behavior, emotion dysregulation, and internalizing problems in kindergarten and Grade 1 (Waves 1-2); peer sociometric nominations tracked "least liked" and victimization in Grades 2, 3, and 4 (Waves 3-5); and youth reported on social problems, depressed mood, school adjustment difficulties, and delinquent activities in early adolescence (Grade 7, Wave 6). Structural models revealed that early aggression and emotion dysregulation (but not internalizing behavior) made unique contributions to grade school peer rejection; only emotion dysregulation made unique contributions to grade school victimization. Early internalizing problems and grade school victimization uniquely predicted adolescent social problems and depressed mood. Early aggression and grade school peer rejection uniquely predicted adolescent school adjustment difficulties and delinquent activities. Aggression and emotion dysregulation at school entry increased risk for peer rejection and victimization, and these two types of peer adversity had distinct as well as shared risk and adjustment correlates. Results suggest that the emotional functioning and peer experiences of aggressive-disruptive children deserve further attention in developmental and clinical research.
NASA Astrophysics Data System (ADS)
Solov'ev, V. A.; Chernov, M. Yu; Baidakova, M. V.; Kirilenko, D. A.; Yagovkina, M. A.; Sitnikova, A. A.; Komissarova, T. A.; Kop'ev, P. S.; Ivanov, S. V.
2018-01-01
This paper presents a study of structural properties of InGaAs/InAlAs quantum well (QW) heterostructures with convex-graded InxAl1-xAs (x = 0.05-0.79) metamorphic buffer layers (MBLs) grown by molecular beam epitaxy on GaAs substrates. Mechanisms of elastic strain relaxation in the convex-graded MBLs were studied by the X-ray reciprocal space mapping combined with the data of spatially-resolved selected area electron diffraction implemented in a transmission electron microscope. The strain relaxation degree was approximated for the structures with different values of an In step-back. Strong contribution of the strain relaxation via lattice tilt in addition to the formation of the misfit dislocations has been observed for the convex-graded InAlAs MBL, which results in a reduced threading dislocation density in the QW region as compared to a linear-graded MBL.
A computer-aided diagnosis system of nuclear cataract.
Li, Huiqi; Lim, Joo Hwee; Liu, Jiang; Mitchell, Paul; Tan, Ava Grace; Wang, Jie Jin; Wong, Tien Yin
2010-07-01
Cataracts are the leading cause of blindness worldwide, and nuclear cataract is the most common form of cataract. An algorithm for automatic diagnosis of nuclear cataract is investigated in this paper. Nuclear cataract is graded according to the severity of opacity using slit lamp lens images. Anatomical structure in the lens image is detected using a modified active shape model. On the basis of the anatomical landmark, local features are extracted according to clinical grading protocol. Support vector machine regression is employed for grade prediction. This is the first time that the nucleus region can be detected automatically in slit lamp images. The system is validated using clinical images and clinical ground truth on >5000 images. The success rate of structure detection is 95% and the average grading difference is 0.36 on a 5.0 scale. The automatic diagnosis system can improve the grading objectivity and potentially be used in clinics and population studies to save the workload of ophthalmologists.
Case Study: What Supports Students to Improve Their Grades?
ERIC Educational Resources Information Center
Sieminski, Sandy; Messenger, Julie; Murphy, Sam
2016-01-01
This case study considers students who achieved "borderline" (40-45%) grades in their first assignment on a module, but went on to markedly improve their grades over the course of the module. The students were studying nursing and social work at the UK Open University, and they were all sponsored by employers. Semi-structured telephone…
49 CFR 1242.20 - Highway grade crossings (accounts XX-17-22 and XX-18-22).
Code of Federal Regulations, 2011 CFR
2011-10-01
... 49 Transportation 9 2011-10-01 2011-10-01 false Highway grade crossings (accounts XX-17-22 and XX-18-22). 1242.20 Section 1242.20 Transportation Other Regulations Relating to Transportation... RAILROADS 1 Operating Expenses-Way and Structures § 1242.20 Highway grade crossings (accounts XX-17-22 and...
49 CFR 1242.20 - Highway grade crossings (accounts XX-17-22 and XX-18-22).
Code of Federal Regulations, 2012 CFR
2012-10-01
... 49 Transportation 9 2012-10-01 2012-10-01 false Highway grade crossings (accounts XX-17-22 and XX-18-22). 1242.20 Section 1242.20 Transportation Other Regulations Relating to Transportation... RAILROADS 1 Operating Expenses-Way and Structures § 1242.20 Highway grade crossings (accounts XX-17-22 and...
49 CFR 1242.20 - Highway grade crossings (accounts XX-17-22 and XX-18-22).
Code of Federal Regulations, 2014 CFR
2014-10-01
... 49 Transportation 9 2014-10-01 2014-10-01 false Highway grade crossings (accounts XX-17-22 and XX-18-22). 1242.20 Section 1242.20 Transportation Other Regulations Relating to Transportation... RAILROADS 1 Operating Expenses-Way and Structures § 1242.20 Highway grade crossings (accounts XX-17-22 and...
49 CFR 1242.20 - Highway grade crossings (accounts XX-17-22 and XX-18-22).
Code of Federal Regulations, 2013 CFR
2013-10-01
... 49 Transportation 9 2013-10-01 2013-10-01 false Highway grade crossings (accounts XX-17-22 and XX-18-22). 1242.20 Section 1242.20 Transportation Other Regulations Relating to Transportation... RAILROADS 1 Operating Expenses-Way and Structures § 1242.20 Highway grade crossings (accounts XX-17-22 and...
ERIC Educational Resources Information Center
Gott, Margaret E., Comp.; Wailes, James R., Comp.
This booklist is intended for elementary school science students with high interest and low vocabulary skills. The Spache Readability Scale, Dale-Chall formula, sentence structure, paragraph flow, illustration, and diagram analysis or publishers stated grade level were used to determine grade level designations. The included interest level varies…
The Development of Reading Ability in First and Second Grade. Technical Report No. 516.
ERIC Educational Resources Information Center
Meyer, Linda A.; And Others
This study determined how children develop reading ability in first and second grade. Subjects, approximately 315 children from 3 school districts in the midwest, were given a series of standardized and customized measures of reading comprehension. Linear structural models were developed at both grade levels using LISREL to explain variance in…
ERIC Educational Resources Information Center
Grzimek, Volker; Marks, Melanie Beth; Kinnamon, Eric
2014-01-01
Using survey data the authors investigate the impact of grade point average (GPA) on students' preferences for classroom group work and its structure. Topics range from general attitudes and beliefs (benefits to grades, impact on mastery of material, professors' motives) to administration (group composition, grading, peer reviews, group…
Availability and Use of Informational Texts in Second-, Third-, and Fourth-Grade Classrooms
ERIC Educational Resources Information Center
Jeong, Jongseong; Gaffney, Janet S.; Choi, Jin-Oh
2010-01-01
A sharp increase in the proportion of informational text with the corresponding expansion of cognitive demands and conceptual structures is a widely held explanation for the decline in reading achievement at the fourth-grade level. In this study, differences in the proportion of informational text across the second, third, and fourth grades were…
Process and apparatus for obtaining silicon from fluosilicic acid
Sanjurjo, Angel
1988-06-28
Process and apparatus for producing low cost, high purity solar grade silicon ingots in single crystal or quasi single crystal ingot form in a substantially continuous operation in a two stage reactor starting with sodium fluosilicate and a metal more electropositive than silicon (preferably sodium) in separate compartments having easy vapor transport therebetween and thermally decomposing the sodium fluosilicate to cause formation of substantially pure silicon and a metal fluoride which may be continuously separated in the melt and silicon may be directly and continuously cast from the melt.
Tedder, Daniel W.
1985-05-14
Alcohol substantially free of water is prepared by continuously fermenting a fermentable biomass feedstock in a fermentation unit, thereby forming an aqueous fermentation liquor containing alcohol and microorganisms. Continuously extracting a portion of alcohol from said fermentation liquor with an organic solvent system containing an extractant for said alcohol, thereby forming an alcohol-organic solvent extract phase and an aqueous raffinate. Said alcohol is separated from said alcohol-organic solvent phase. A raffinate comprising microorganisms and unextracted alcohol is returned to the fermentation unit.
NASA Astrophysics Data System (ADS)
Zaleta, Kristy L.
The purpose of this study was to investigate the impact of gender and type of inquiry curriculum (open or structured) on science process skills and epistemological beliefs in science of sixth grade students. The current study took place in an urban northeastern middle school. The researcher utilized a sample of convenience comprised of 303 sixth grade students taught by four science teachers on separate teams. The study employed mixed methods with a quasi-experimental design, pretest-posttest comparison group with 17 intact classrooms of students. Students' science process skills and epistemological beliefs in science (source, certainty, development, and justification) were measured before and after the intervention, which exposed different groups of students to different types of inquiry (structured or open). Differences between comparison and treatment groups and between male and female students were analyzed after the intervention, on science process skills, using a two-way analysis of covariance (ANCOVA), and, on epistemological beliefs in science, using a two-way multivariate analysis of covariance (MANCOVA). Responses from two focus groups of open inquiry students were cycle coded and examined for themes and patterns. Quantitative measurements indicated that girls scored significantly higher on science process skills than boys, regardless of type of inquiry instruction. Neither gender nor type of inquiry instruction predicted students' epistemological beliefs in science after accounting for students' pretest scores. The dimension Development accounted for 10.6% of the variance in students' science process skills. Qualitative results indicated that students with sophisticated epistemological beliefs expressed engagement with the open-inquiry curriculum. Students in both the sophisticated and naive beliefs groups identified challenges with the curriculum and improvement in learning as major themes. The types of challenges identified differed between the groups: sophisticated beliefs group students focused on their insecurity of not knowing how to complete the activities correctly, and naive beliefs group students focused on the amount of work and how long it took them to complete it. The description of the improvement in learning was at a basic level for the naive beliefs group and at a more complex level for the sophisticated beliefs group. Implications for researchers and educators are discussed.
NASA Technical Reports Server (NTRS)
Baldwin, Richard S.; Guzik, Monica; Skierski, Michael
2011-01-01
As NASA prepares for its next era of manned spaceflight missions, advanced energy storage technologies are being developed and evaluated to address future mission needs and technical requirements and to provide new mission-enabling technologies. Cell-level components for advanced lithium-ion batteries possessing higher energy, more reliable performance and enhanced, inherent safety characteristics are actively under development within the NASA infrastructure. A key component for safe and reliable cell performance is the cell separator, which separates the two energetic electrodes and functions to prevent the occurrence of an internal short-circuit while enabling ionic transport. Recently, a new generation of co-extruded separator films has been developed by ExxonMobil Chemical and introduced into their battery separator product portfolio. Several grades of this new separator material have been evaluated with respect to dynamic mechanical properties and safety-related performance attributes. This paper presents the results of these evaluations in comparison to a current state-ofthe-practice separator material. The results are discussed with respect to potential opportunities to enhance the inherent safety characteristics and reliability of future, advanced lithium-ion cell chemistries.
Total and settling velocity-fractionated pollution potential of sewer sediments in Jiaxing, China.
Zhou, Yongchao; Zhang, Ping; Zhang, Yiping; Li, Jin; Zhang, Tuqiao; Yu, Tingchao
2017-10-01
Sewer sediments and their associated contaminant released along with wet-weather discharges pose potential pollution risks to environment. This paper presents total characteristics of sediments collected from Jiaxing, China. Size distribution and concentrations of volatile solids (VS) and four metals (Pb, Cu, Zn, Cr) of sediment samples from seven land use categories were analyzed. Then, the sediment samples were graded five fractions according to its settling velocity through the custom-built settling velocity-grading device. Sediment mass and pollution load distribution based on settling velocity were also assessed. The results show that there are relatively high level of heavy metal load in the sediment of separated storm drainage systems in Jiaxing, especially for the catchment of residential area (RA), road of developed area (RDA), and industrial area (IA). Although grain size follows a trend of increasing along with settling velocity, the methods of settling velocity grading are meaningful for stormwater treatment facilities with precipitation. For all land use categories, the pollution concentrations of the three lower settling velocity-fractionated sediment are relatively consistent and higher than others. Combined with mass distribution, the pollution percentage of fraction with different velocities for seven land use categories were also evaluated. Based on it, the statistical conclusion of design target settling velocity to different pollution load removal rates are drawn, which is helpful to guide design of on-site precipitation separation facilities.
Semiconductor-based photoelectrochemical water splitting at the limit of very wide depletion region
Liu, Mingzhao; Lyons, John L.; Yan, Danhua H.; ...
2015-11-23
In semiconductor-based photoelectrochemical (PEC) water splitting, carrier separation and delivery largely relies on the depletion region formed at the semiconductor/water interface. As a Schottky junction device, the trade-off between photon collection and minority carrier delivery remains a persistent obstacle for maximizing the performance of a water splitting photoelectrode. Here, it is demonstrated that the PEC water splitting efficiency for an n-SrTiO 3 (n-STO) photoanode is improved very significantly despite its weak indirect band gap optical absorption (α < 10⁴ cm⁻¹), by widening the depletion region through engineering its doping density and profile. Graded doped n-SrTiO 3 photoanodes are fabricated withmore » their bulk heavily doped with oxygen vacancies but their surface lightly doped over a tunable depth of a few hundred nanometers, through a simple low temperature re-oxidation technique. The graded doping profile widens the depletion region to over 500 nm, thus leading to very efficient charge carrier separation and high quantum efficiency (>70%) for the weak indirect transition. As a result, this simultaneous optimization of the light absorption, minority carrier (hole) delivery, and majority carrier (electron) transport by means of a graded doping architecture may be useful for other indirect band gap photocatalysts that suffer from a similar problem of weak optical absorption.« less
Fish passage and abundance around grade control structures on incised streams
Thomas, J.T.; Papanicolaou, A.N.; Pierce, C.L.; Dermisis, D.C.; Litvan, M.E.; Larson, C.J.
2009-01-01
This paper summarizes research from separate studies of fish passage over weirs (Larson et al., 2004; Litvan, 2006; Litvan, et al., 2008a-c) and weir hydraulics (Papanicolaou and Dermisis, 2006; Papanicolaou and Dermisis, in press). Channel incision in the deep loess region of western Iowa has caused decreased biodiversity because streams have high sediment loads, altered flow regimes, lost habitat, and lost lateral connectivity with their former floodplains. In-stream grade control structures (GCS) are built to prevent further erosion, protect infrastructure, and reduce sediment loads. However, GCS can have a detrimental impact on fisheries abundance and migration, biodiversity, and longitudinal connectivity. Fish mark-recapture studies were performed on stretches of streams with and without GCS. GCS with vertical or 1:4 (rise/run) downstream slopes did not allow fish migration, but GCS with slopes ??? 1:15 did. GCS sites were characterized by greater proportions of pool habitat, maximum depths, fish biomass, slightly higher index of biotic integrity (IBI) scores, and greater macroinvertebrate abundance and diversity than non-GCS sites. After modification of three GCS, IBI scores increased and fish species exhibiting truncated distributions before were found throughout the study area. Another study examined the hydraulic performance of GCS to facilitate unimpeded fish passage by determining the mean and turbulent flow characteristics in the vicinity of the GCS via detailed, non-intrusive field tests. Mean flow depth (Y) and velocity (V) atop the GCS were critical for evaluating GCS performance. Turbulent flow measurements illustrated that certain GCS designs cause sudden constrictions which form eddies large enough to disorient fish. GCS with slopes ??? 1:15 best met the minimum requirements to allow catfish passage of a flow depth of ??? 0.31 m and a mean flow velocity of ??? 1.22 m/s. ?? 2009 ASCE.
Eschler, Anica; Rösler, Klaus; Rotter, Robert; Gradl, Georg; Mittlmeier, Thomas; Gierer, Philip
2014-09-01
The classification system of Rockwood and Young is a commonly used classification for acromioclavicular joint separations subdividing types I-VI. This classification hypothesizes specific lesions to anatomical structures (acromioclavicular and coracoclavicular ligaments, capsule, attached muscles) leading to the injury. In recent literature, our understanding for anatomical correlates leading to the radiological-based Rockwood classification is questioned. The goal of this experimental-based investigation was to approve the correlation between the anatomical injury pattern and the Rockwood classification. In four human cadavers (seven shoulders), the acromioclavicular and coracoclavicular ligaments were transected stepwise. Radiological correlates were recorded (Zanca view) with 15-kg longitudinal tension applied at the wrist. The resulting acromio- and coracoclavicular distances were measured. Radiographs after acromioclavicular ligament transection showed joint space enlargement (8.6 ± 0.3 vs. 3.1 ± 0.5 mm, p < 0.05) and no significant change in coracoclavicular distance (10.4 ± 0.9 vs. 10.0 ± 0.8 mm). According to the Rockwood classification only type I and II lesions occurred. After additional coracoclavicular ligament cut, the acromioclavicular joint space width increased to 16.7 ± 2.7 vs. 8.6 ± 0.3 mm, p < 0.05. The mean coracoclavicular distance increased to 20.6 ± 2.1 mm resulting in type III-V lesions concerning the Rockwood classification. Trauma with intact coracoclavicular ligaments did not result in acromioclavicular joint lesions higher than Rockwood type I and II. The clinical consequence for reconstruction of low-grade injuries might be a solely surgical approach for the acromioclavicular ligaments or conservative treatment. High-grade injuries were always based on additional structural damage to the coracoclavicular ligaments. Rockwood type V lesions occurred while muscle attachments were intact.
ERIC Educational Resources Information Center
Kar, Tugrul
2015-01-01
This study aimed to investigate how the semantic structures of problems posed by sixth-grade middle school students for the addition of fractions affect their problem-posing performance. The students were presented with symbolic operations involving the addition of fractions and asked to pose two different problems related to daily-life situations…
ERIC Educational Resources Information Center
Shymansky, James Andrew
Student behaviors associated with two sets of learning conditions in a fifth grade science program were investigated. The effects of student-structured learning of science (SSLS) and teacher-structured learning in science (TSLS) on classroom behaviors of the students were analyzed. Observational data of student behavior were collected daily by a…
ERIC Educational Resources Information Center
Akman, Ozkan; Koçoglu, Erol
2016-01-01
The purpose of this study is to present the connections between the concepts in perception and cognitive structures of secondary school 8th grade students for principles of Ataturk. Word association test is used in data collection. The number of the total participants in this research is 190. A frequency table is formed for the data obtained in…
ERIC Educational Resources Information Center
Sack, Jacqueline J.
2013-01-01
This article explicates the development of top-view numeric coding of 3-D cube structures within a design research project focused on 3-D visualization skills for elementary grades children. It describes children's conceptual development of 3-D cube structures using concrete models, conventional 2-D pictures and abstract top-view numeric…
Structure formation in grade 20 steel during equal-channel angular pressing and subsequent heating
NASA Astrophysics Data System (ADS)
Dobatkin, S. V.; Odesskii, P. D.; Raab, G. I.; Tyutin, M. R.; Rybalchenko, O. V.
2016-11-01
The structure formation and the mechanical properties of quenched and tempered grade 20 steel after equal-channel angular pressing (ECAP) at various true strains and 400°C are studied. Electron microscopy analysis after ECAP shows a partially submicrocrystalline and partially subgrain structure with a structural element size of 340-375 nm. The structural element size depends on the region in which the elements are formed (polyhedral ferrite, needle-shaped ferrite, tempered martensite, and pearlite). Heating of the steel after ECAP at 400 and 450°C increases the fraction of high-angle boundaries and the structural ferrite element size to 360-450 nm. The fragmentation and spheroidization of cementite lamellae of pearlite and subgrain coalescence in the regions of needle-shaped ferrite and tempered martensite take place at a high ECAP true strain and heating temperature. Structural refinement ensures considerable strengthening, namely, UTS 742-871 MPa at EL 11-15.3%. The strength slightly increases, whereas the plasticity slightly decreases when the true strain increases during ECAP. After ECAP and heating, the strength and plastic properties of the grade 20 steel remain almost the same.
NASA Astrophysics Data System (ADS)
Plessen, Birgit; Harlov, Daniel E.; Henry, Darrell; Guidotti, Charles V.
2010-08-01
Ammonium fixed in micas of metamorphic rocks is a sensitive indicator both of organic-inorganic interactions during diagenesis as well as of the devolatilization history and fluid/rock interaction during metamorphism. In this study, a collection of geochemically well-characterized biotite separates from a series of graphite-bearing Paleozoic greenschist- to upper amphibolite-facies metapelites, western Maine, USA, were analyzed for ammonium nitrogen ( NH4+-N) contents and isotopic composition (δ 15N NH4) using the HF-digestion distillation technique followed by the EA-IRMS technique. Biotite separates, sampled from 9 individual metamorphic zones, contain 3000 to 100 ppm NH4+-N with a wide range in δ 15N from +1.6‰ to +9.1‰. Average NH4+-N contents in biotite show a distinct decrease from about 2750 ppm for the lowest metamorphic grade (˜500 °C) down to 218 ppm for the highest metamorphic grade (˜685 °C). Decreasing abundances in NH4+ are inversely correlated in a linear fashion with increasing K + in biotite as a function of metamorphic grade and are interpreted as a devolatilization effect. Despite expected increasing δ 15N NH4 values in biotite with nitrogen loss, a significant decrease from the Garnet Zones to the Staurolite Zones was found, followed by an increase to the Sillimanite Zones. This pattern for δ 15N NH4 values in biotite inversely correlates with Mg/(Mg + Fe) ratios in biotite and is discussed in the framework of isotopic fractionation due to different exchange processes between NH4+-NH or NH4+-N, reflecting devolatilization history and redox conditions during metamorphism.
Structural Crashworthiness Standards Comparison: Grade Crossing Collision Scenarios
DOT National Transportation Integrated Search
2009-10-20
In support of the Federal Railroad Administrations (FRA) : Railroad Equipment Safety Program, American and European : grade-crossing collision scenarios were evaluated and : compared. Finite element analyses (FEA) were employed to : subject an FRA...
Spórna-Kucab, Aneta; Garrard, Ian; Ignatova, Svetlana; Wybraniec, Sławomir
2015-02-06
Betalains, natural plant pigments, are beneficial compounds due to their antioxidant and possible chemoprotective properties. A mixture of betalains: betanin/isobetanin, decarboxybetanins and neobetanin from processed red beet roots (Beta vulgaris L.) juice was separated in food-grade, gradient solvent systems using high-performance counter-current chromatography (HPCCC). The decarboxylated and dehydrogenated betanins were obtained by thermal degradation of betanin/isobetanin from processed B. vulgaris L. juice under mild conditions. Two solvent systems (differing in their composition by phosphoric acid and ethanol volume gradient) consisting of BuOH-EtOH-NaClsolution-H2O-H3PO4 (v/v/v/v/v, 1300:200-1000:1300:700:2.5-10) in the 'tail-to-head' mode were run. The flow rate of the mobile phase (organic phase) was 1.0 or 2.0 ml/min and the column rotation speed was 1,600 rpm (20°C). The retention of the solvent system stationary phase (aqueous phase) was ca. 80%. The system with the acid and ethanol volume gradient consisting of BuOH-EtOH-NaClsolution-H2O-H3PO4 (v/v/v/v/v, 1300:200-240:1300:700:2.5-4.5) pumped at 2.0 ml/min was the most effective for a separation of betanin/isobetanin, 17-decarboxy-betanin/-isobetanin, 2-decarboxy-betanin/-isobetanin, 2,17-bidecarboxy-betanin/-isobetanin pairs as well as neobetanin. The pigments were detected by LC-DAD and LC-MS. The results are crucial in the application of completely food-grade solvent systems in separation of food-grade compounds as well, and the systems can possibly be extended to other ionizable and polar compounds with potential health benefits. In particular, the method is applicable for the isolation and purification of betalains present in such rich sources as B. vulgaris L. roots as well as cacti fruits and Amaranthaceae flowering plants due to modification possibilities of the solvent systems polarity. Copyright © 2014 Elsevier B.V. All rights reserved.
Analysis of Stainless Steel Sandwich Panels with a Metal Foam Care for Lightweight Fan Blade Design
NASA Technical Reports Server (NTRS)
Min, James B.; Ghosn, Louis J.; Lerch, Bradley A.; Raj, Sai V.; Holland, Frederic A., Jr.; Hebsur, Mohan G.
2004-01-01
The quest for cheap, low density and high performance materials in the design of aircraft and rotorcraft engine fan and propeller blades poses immense challenges to the materials and structural design engineers. Traditionally, these components have been fabricated using expensive materials such as light weight titanium alloys, polymeric composite materials and carbon-carbon composites. The present study investigates the use of P sandwich foam fan blade made up of solid face sheets and a metal foam core. The face sheets and the metal foam core material were an aerospace grade precipitation hardened 17-4 PH stainless steel with high strength and high toughness. The stiffness of the sandwich structure is increased by separating the two face sheets by a foam core. The resulting structure possesses a high stiffness while being lighter than a similar solid construction. Since the face sheets carry the applied bending loads, the sandwich architecture is a viable engineering concept. The material properties of 17-4 PH metal foam are reviewed briefly to describe the characteristics of the sandwich structure for a fan blade application. A vibration analysis for natural frequencies and P detailed stress analysis on the 17-4 PH sandwich foam blade design for different combinations of skin thickness and core volume %re presented with a comparison to a solid titanium blade.
Freedom for Individual Development: Vocational Education.
ERIC Educational Resources Information Center
Gassman, Roberta; Merzon, Fredda
This inservice module would benefit all teachers in grades K-12, as well as administrators, paraprofessional support staff, counselors, social workers, and other helping professionals within the school system. It is intended to aid in diminishing sex role sterotyping. The module contains four separate training units, with instructions for running…
School Choice and Educational Inequality in South Korea
ERIC Educational Resources Information Center
Byun, Soo-Yong; Kim, Kyung-Keun; Park, Hyunjoon
2012-01-01
Using a nationally representative sample of eleventh grade students in South Korea, we investigated how the residentially based school assignment policy called the High School Equalization Policy (HSEP) shaped the separation of low and high socioeconomic status (SES) students between schools. We found that there was a smaller between-school…
Contemporary Children and Basal Reading Series.
ERIC Educational Resources Information Center
Klebacher, Kathryn F.
Contemporary children must deal with many family problems that children 20 years ago never had to face, including divorce, parental separation, death, working mothers, and economic status. To determine how well current basal reading series reflect the changing American family, the stories of four basal reading series for grades four, five, and six…
ERIC Educational Resources Information Center
Gunderson, Doris V.
Sex roles in two disparate areas, reading and literature, are treated separately in this paper. Sex-related factors listed which may attribute to the high incidence of boys experiencing reading difficulty were: (1) predominance of female teachers in the primary grades, (2) boys' lack of interest in basal readers, (3) adults considering reading a…
Supercritical carbon dioxide fractionation of whey protein isolate for new food-grade ingredients
USDA-ARS?s Scientific Manuscript database
A new, environmentally benign whey protein fractionation process was developed using supercritical CO2 (SCO2) as an acid aggregating agent to separate a-lactalbumin (a-LA) aggregates from soluble beta-lactoglobulin (beta-LG) protein in concentrated whey protein isolate (WPI) solutions. The process e...
46 CFR 151.13-5 - Cargo segregation-tanks.
Code of Federal Regulations, 2010 CFR
2010-10-01
... CARRYING BULK LIQUID HAZARDOUS MATERIAL CARGOES Cargo Segregation § 151.13-5 Cargo segregation—tanks. (a... design. (2) Segregation of cargo space from machinery spaces and other spaces which have or could have a... separating medium. ii=Double bulkhead, required. Cofferdam, empty tank, pumproom, tank with Grade E Liquid...
46 CFR 151.13-5 - Cargo segregation-tanks.
Code of Federal Regulations, 2011 CFR
2011-10-01
... CARRYING BULK LIQUID HAZARDOUS MATERIAL CARGOES Cargo Segregation § 151.13-5 Cargo segregation—tanks. (a... design. (2) Segregation of cargo space from machinery spaces and other spaces which have or could have a... separating medium. ii=Double bulkhead, required. Cofferdam, empty tank, pumproom, tank with Grade E Liquid...
46 CFR 151.13-5 - Cargo segregation-tanks.
Code of Federal Regulations, 2012 CFR
2012-10-01
... CARRYING BULK LIQUID HAZARDOUS MATERIAL CARGOES Cargo Segregation § 151.13-5 Cargo segregation—tanks. (a... design. (2) Segregation of cargo space from machinery spaces and other spaces which have or could have a... separating medium. ii=Double bulkhead, required. Cofferdam, empty tank, pumproom, tank with Grade E Liquid...
Proyecto Leer Bulletin Number 6.
ERIC Educational Resources Information Center
Tome, Martha V., Ed.
This annotated, cumulative bibliography, developed by the Proyecto Leer Program, of more than 600 selected works in Spanish focuses on works which meet the following criteria: (1) reading difficulty does not exceed 10th grade level, and (2) selections are suitable for a Spanish-American community. Books for children are listed separately from…
ERIC Educational Resources Information Center
Gray, Katti
2011-01-01
The diagonal line in Arkansas separating academic and economic strivers from those less likely to make the grade--and then land a decent job--runs roughly from Texarkana in the southwest to Blytheville in northeast. "The wealthiest people live above that line," said Dr. James Jennings, a history professor and education department…
ERIC Educational Resources Information Center
Winston, David
2008-01-01
In today's Information Age, the ability to process knowledge and out-innovate the competition separates economic winners from losers. Education is the new capital, and it gives that competitive edge. But by most measurements today, American schools get, at best, mediocre grades. In 2005, Achieve, Inc., a nonprofit, nonpartisan group concerned with…
Middle Level Leadership Handbook. National Leadership Camp Curriculum--Student Guide.
ERIC Educational Resources Information Center
Jensen, Jacquie; And Others
Activities and exercises to enhance student leadership are included in this curriculum guide for middle-level student leaders and their advisors. Because students in intermediate grades are not "little high school students," this separate leadership curriculum guide for middle-level student leaders was developed. Although the achieved skills are…
Genetic and Environmental Influences on Vocabulary and Reading Development
ERIC Educational Resources Information Center
Olson, Richard K.; Keenan, Janice M.; Byrne, Brian; Samuelsson, Stefan; Coventry, William L.; Corley, Robin; Wadsworth, Sally J.; Willcutt, Erik G.; DeFries, John C.; Pennington, Bruce F.; Hulslander, Jacqueline
2011-01-01
Genetic and environmental relations between vocabulary and reading skills were explored longitudinally from preschool through Grades 2 and 4. At preschool there were strong shared-environment and weak genetic influences on both vocabulary and print knowledge but substantial differences in their source. Separation of etiology for vocabulary and…
Children's Inferential Comprehension of Pragmatic Causal Relations in Reading.
ERIC Educational Resources Information Center
Morgan, Argiro Louchis
A study investigated the separate and combined effects of the syntactic organization of the sentence, the contextual framework in which a message is embedded, and the readers' past experiences on children's inferential reading comprehension of pragmatic cause/effect statements. The subjects, 144 fourth grade students, were asked to specify the…
Upper Elementary Students' Motivation to Read Fiction and Nonfiction
ERIC Educational Resources Information Center
Parsons, Allison Ward; Parsons, Seth A.; Malloy, Jacquelynn A.; Gambrell, Linda B.; Marinak, Barbara A.; Reutzel, D. Ray; Applegate, Mary D.; Applegate, Anthony J.; Fawson, Parker C.
2018-01-01
This research explores upper elementary students' motivation to read fiction and nonfiction. Using expectancy-value theory, the researchers developed separate surveys to measure motivation to read fiction and nonfiction. Researchers administered surveys to 1,104 upper elementary students (grades 3-6) in multiple locations across the United States…
Assessing African American Adolescents' Risk for Suicide Attempts: Attachment Theory.
ERIC Educational Resources Information Center
Lyon, Maureen E.; Benoit, Marilyn; O'Donnell, Regina M.; Getson, Pamela R.; Silber, Tomas; Walsh, Thomas
2000-01-01
Evaluates risk factors in African American adolescent suicide attempters (n=51) and nonsuicidal (n=124) adolescents. Results show that threat of separation from a parental figure, insomnia, neglect, substance abuse, suicidal ideation, and failing grades were the strongest predictors of suicide attempt. Unexpected findings include high levels of…
7 CFR 51.2548 - Average moisture content determination.
Code of Federal Regulations, 2010 CFR
2010-01-01
... 7 Agriculture 2 2010-01-01 2010-01-01 false Average moisture content determination. 51.2548... moisture content determination. (a) Determining average moisture content of the lot is not a requirement of... connection with grade analysis or as a separate determination. (b) Nuts shall be obtained from a randomly...
NASA Astrophysics Data System (ADS)
Pratesi, Fabio; Tapete, Deodato; Terenzi, Gloria; Del Ventisette, Chiara; Moretti, Sandro
2015-08-01
We propose a novel set of indexes to classify the information content of Persistent Scatterers (PS) and rate the health of engineering structures at urban to local scale. PS are automatically sampled and grouped via 'control areas' coinciding with the building and its surrounding environment. Density over the 'control areas' and velocity of PS are converted respectively into: Completeness of Information Index (Ici) that reflects the PS coverage grade; and Conservation Criticality Indexes (Icc) which rate the health condition of the monument separately for the object and surrounding control areas. The deformation pattern over the structure is classified as isolated (i) or diffused (d) based on the Velocity Distribution Index (Ivd). Both Ici and Icc are rated from A to E classes using a colour-coded system that intentionally emulates an energy-efficiency scale, to encourage the exploitation of PS by stakeholders and end-users in the practise of engineering surveying. Workability and reliability of the classification indexes are demonstrated over the urban heritage of Florence, Italy, using well established ERS-1/2 (1992-2000) descending, ENVISAT (2003-2010) ascending and descending PS datasets. The indexes are designed in perspective of handling outputs from InSAR processing of higher-resolution time series.
Niclasen, Janni; Keilow, Maria; Obel, Carsten
2018-05-01
Well-being is considered a prerequisite for learning. The Danish Ministry of Education initiated the development of a new 40-item student well-being questionnaire in 2014 to monitor well-being among all Danish public school students on a yearly basis. The aim of this study was to investigate the basic psychometric properties of this questionnaire. We used the data from the 2015 Danish student well-being survey for 268,357 students in grades 4-9 (about 85% of the study population). Descriptive statistics, exploratory factor analyses, confirmatory factor analyses and Cronbach's α reliability measures were used in the analyses. The factor analyses did not unambiguously support one particular factor structure. However, based on the basic descriptive statistics, exploratory factor analyses, confirmatory factor analyses, the semantics of the individual items and Cronbach's α, we propose a four-factor structure including 27 of the 40 items originally proposed. The four scales measure school connectedness, learning self-efficacy, learning environment and classroom management. Two bullying items and two psychosomatic items should be considered separately, leaving 31 items in the questionnaire. The proposed four-factor structure addresses central aspects of well-being, which, if used constructively, may support public schools' work to increase levels of student well-being.
DOE Office of Scientific and Technical Information (OSTI.GOV)
van Benthem, Klaus; Tan, Guolong; French, Roger H
2006-01-01
Attractive van der Waals V London dispersion interactions between two half crystals arise from local physical property gradients within the interface layer separating the crystals. Hamaker coefficients and London dispersion energies were quantitatively determined for 5 and near- 13 grain boundaries in SrTiO3 by analysis of spatially resolved valence electron energy-loss spectroscopy (VEELS) data. From the experimental data, local complex dielectric functions were determined, from which optical properties can be locally analysed. Both local electronic structures and optical properties revealed gradients within the grain boundary cores of both investigated interfaces. The obtained results show that even in the presence ofmore » atomically structured grain boundary cores with widths of less than 1 nm, optical properties have to be represented with gradual changes across the grain boundary structures to quantitatively reproduce accurate van der Waals V London dispersion interactions. London dispersion energies of the order of 10% of the apparent interface energies of SrTiO3 were observed, demonstrating their significance in the grain boundary formation process. The application of different models to represent optical property gradients shows that long-range van der Waals V London dispersion interactions scale significantly with local, i.e atomic length scale property variations.« less
NASA Technical Reports Server (NTRS)
Pindera, Marek-Jerzy; Aboudi, Jacob
1998-01-01
The objective of this three-year project was to develop and deliver to NASA Lewis one-dimensional and two-dimensional higher-order theories, and related computer codes, for the analysis, optimization and design of cylindrical functionally graded materials/structural components for use in advanced aircraft engines (e.g., combustor linings, rotor disks, heat shields, blisk blades). To satisfy this objective, a quasi one-dimensional version of the higher-order theory, HOTCFGM-1D, and four computer codes based on this theory, for the analysis, design and optimization of cylindrical structural components functionally graded in the radial direction were developed. The theory is applicable to thin multi-phased composite shell/cylinders subjected to macroscopically axisymmetric thermomechanical and inertial loading applied uniformly along the axial direction such that the overall deformation is characterized by a constant average axial strain. The reinforcement phases are uniformly distributed in the axial and circumferential directions, and arbitrarily distributed in the radial direction, thereby allowing functional grading of the internal reinforcement in this direction.
Anderson, Mark A; Simeone, F Joseph; Palmer, William E; Chang, Connie Y
2018-06-01
To correlate MRI findings of patients with posterior cruciate ligament (PCL) injury and surgical management. A retrospective search yielded 79 acute PCL injuries (36 ± 16 years old, 21 F, 58 M). Two independent readers graded PCL tear location (proximal, middle, or distal third) and severity (low-grade or high-grade partial/complete) and evaluated injury of other knee structures. When available, operative reports were examined and the performed surgical procedure was compared with injury grade, location, and presence of associated injuries. The most commonly injured knee structures in acute PCL tears were posterolateral corner (58/79, 73%) and anterior cruciate ligament (ACL) (48/79, 61%). Of the 64 patients with treatment information, 31/64 (48%) were managed surgically: 12/31 (39%) had PCL reconstruction, 13/31 (42%) had ACL reconstruction, 10/31 (32%) had posterolateral corner reconstruction, 9/31 (29%) had LCL reconstruction, 8/31 (26%) had meniscectomy, and 8/31 (26%) had fixation of a fracture. Proximal third PCL tear and multiligamentous injury were more commonly associated with surgical management (P < 0.05). Posterolateral and posteromedial corner, ACL, collateral ligament, meniscus, patellar retinaculum, and gastrocnemius muscle injury, and fracture were more likely to result in surgical management (P < 0.05). Patients with high-grade partial/complete PCL tear were more likely to have PCL reconstruction as a portion of surgical management (P < 0.05). Location of PCL tear and presence of other knee injuries were associated with surgical management while high-grade/complete PCL tear grade was associated with PCL reconstruction. MRI reporting of PCL tear location, severity, and of other knee structure injuries is important for guiding clinical management.
Falling Behind: Lingering Costs of the High School Transition for Youth Friendships and Grades
ERIC Educational Resources Information Center
Felmlee, Diane; McMillan, Cassie; Inara Rodis, Paulina; Osgood, D. Wayne
2018-01-01
This study investigates the influence of structural transitions to high school on adolescents' friendship networks and academic grades from 6th through 12th grade, in a direct comparison of students who do and do not transition. We utilize data from 14,462 youth in 51 networks from 26 districts (Promoting School-Community Partnerships to Enhance…
2013-09-01
Structural Composite Supercapacitors : Electrical and Mechanical Impact of Separators and Processing Conditions by Edwin B. Gienger, James F...Proving Ground, MD 21005-5066 ARL-TR-6624 September 2013 Structural Composite Supercapacitors : Electrical and Mechanical Impact of...2012 4. TITLE AND SUBTITLE Structural Composite Supercapacitors : Electrical and Mechanical Impact of Separators and Processing Conditions 5a
Dawes, Nickki Pearce; Modecki, Kathryn L; Gonzales, Nancy; Dumka, Larry; Millsap, Roger
2015-11-01
The potential benefits of participation in extracurricular activities may be especially important for youth who are at risk for academic underachievement, such as low income Mexican-origin youth in the U.S. To advance understanding of factors that drive participation for this population, this study examined Mexican-origin youth's trajectories of participation in extracurricular activities across Grades 7-12 and tested theoretically-derived predictors of these trajectories. Participants were 178 adolescents (53.9 % Female, Mage = 12.28) and their mothers who separately completed in-home interviews. Youth reported the frequency of their participation across a range of extracurricular activities. Latent growth curve models of overall extracurricular activities participation, sports participation, and fine arts participation were individually estimated via structural equation modeling. The findings demonstrated developmental declines in overall participation and in sports participation. For fine arts, declines in participation in middle school were followed by subsequent increases during high school (a curvilinear pattern). Motivationally-salient predictors of participation trajectories included youth's traditional cultural values orientation (sports), the mothers' educational aspirations for the youth (sports, fine arts, overall activity), and youth gender (sports, fine arts). Overall, the results suggest variability in participation trajectories based on program type, and highlight the need for additional research to enhance our understanding of the impact of culturally-relevant predictors on participation over time.
Steinsbekk, Silje; Wichstrøm, Lars
2015-05-01
To examine the prevalence and stability of DSM-4-defined sleep disorders from preschool to first grade and to explore the bidirectional relationship between sleep disorders and symptoms of psychiatric disorders. All children born in 2003 or 2004 in Trondheim, Norway, who attended regular community health checkups for 4-year-olds, were invited to participate (97.2% attendance; 82.0% consent rate, n = 2475) in this study. The authors recruited a screen-stratified subsample of 1250 children and interviewed 994 parents (79.6%) using a structured diagnostic interview (the Preschool Age Psychiatric Assessment). Two years later, 795 of the parents completed the interview. There was stability in insomnia (adjusted odds ratio [OR] = 4.03, confidence interval [CI] = 2.83-5.75) and sleepwalking (adjusted OR = 19.28, CI = 4.53-82.10), whereas none of the children with hypersomnia or nightmare disorder at age 4 had the same disorder 2 years later. Insomnia increased the risk for developing symptoms of conduct disorder, major depressive disorder (MDD), and social phobia when the initial levels of insomnia were adjusted for. Symptoms of attention-deficit hyperactivity disorder, oppositional defiant disorder, and MDD at age 4 were statistically linked to insomnia at age 6. Sleepwalking predicted later separation anxiety disorder, whereas hypersomnia was unrelated to symptoms of psychiatric disorders. Insomnia is a prevalent and stable disorder in children and is bidirectionally related to psychiatric symptoms.
Carr, Norman J; Cecil, Thomas D; Mohamed, Faheez; Sobin, Leslie H; Sugarbaker, Paul H; González-Moreno, Santiago; Taflampas, Panos; Chapman, Sara; Moran, Brendan J
2016-01-01
Pseudomyxoma peritonei (PMP) is a complex disease with unique biological behavior that usually arises from appendiceal mucinous neoplasia. The classification of PMP and its primary appendiceal neoplasia is contentious, and an international modified Delphi consensus process was instigated to address terminology and definitions. A classification of mucinous appendiceal neoplasia was developed, and it was agreed that "mucinous adenocarcinoma" should be reserved for lesions with infiltrative invasion. The term "low-grade appendiceal mucinous neoplasm" was supported and it was agreed that "cystadenoma" should no longer be recommended. A new term of "high-grade appendiceal mucinous neoplasm" was proposed for lesions without infiltrative invasion but with high-grade cytologic atypia. Serrated polyp with or without dysplasia was preferred for tumors with serrated features confined to the mucosa with an intact muscularis mucosae. Consensus was achieved on the pathologic classification of PMP, defined as the intraperitoneal accumulation of mucus due to mucinous neoplasia characterized by the redistribution phenomenon. Three categories of PMP were agreed-low grade, high grade, and high grade with signet ring cells. Acellular mucin should be classified separately. It was agreed that low-grade and high-grade mucinous carcinoma peritonei should be considered synonymous with disseminated peritoneal adenomucinosis and peritoneal mucinous carcinomatosis, respectively. A checklist for the pathologic reporting of PMP and appendiceal mucinous neoplasms was also developed. By adopting the classifications and definitions that were agreed, different centers will be able to use uniform terminology that will allow meaningful comparison of their results.
Friedman, S N; Bambrough, P J; Kotsarini, C; Khandanpour, N; Hoggard, N
2012-12-01
Despite the established role of MRI in the diagnosis of brain tumours, histopathological assessment remains the clinically used technique, especially for the glioma group. Relative cerebral blood volume (rCBV) is a dynamic susceptibility-weighted contrast-enhanced perfusion MRI parameter that has been shown to correlate to tumour grade, but assessment requires a specialist and is time consuming. We developed analysis software to determine glioma gradings from perfusion rCBV scans in a manner that is quick, easy and does not require a specialist operator. MRI perfusion data from 47 patients with different histopathological grades of glioma were analysed with custom-designed software. Semi-automated analysis was performed with a specialist and non-specialist operator separately determining the maximum rCBV value corresponding to the tumour. Automated histogram analysis was performed by calculating the mean, standard deviation, median, mode, skewness and kurtosis of rCBV values. All values were compared with the histopathologically assessed tumour grade. A strong correlation between specialist and non-specialist observer measurements was found. Significantly different values were obtained between tumour grades using both semi-automated and automated techniques, consistent with previous results. The raw (unnormalised) data single-pixel maximum rCBV semi-automated analysis value had the strongest correlation with glioma grade. Standard deviation of the raw data had the strongest correlation of the automated analysis. Semi-automated calculation of raw maximum rCBV value was the best indicator of tumour grade and does not require a specialist operator. Both semi-automated and automated MRI perfusion techniques provide viable non-invasive alternatives to biopsy for glioma tumour grading.
DOE Office of Scientific and Technical Information (OSTI.GOV)
Hilton, Harry H.
Protocols are developed for formulating optimal viscoelastic designer functionally graded materials tailored to best respond to prescribed loading and boundary conditions. In essence, an inverse approach is adopted where material properties instead of structures per se are designed and then distributed throughout structural elements. The final measure of viscoelastic material efficacy is expressed in terms of failure probabilities vs. survival time000.
ERIC Educational Resources Information Center
Uz Bas, Asli; Yurdabakan, Irfan
2012-01-01
The present study aimed to evaluate the factor structure of the Reactive-Proactive Aggression Questionnaire (RPQ) with Turkish children, and to investigate gender, grade-level, and socioeconomic status (SES) differences in reactive and proactive aggression. Participants consisted of 1,081 Turkish children (544 boys and 537 girls) aged 9 to 14…
Architecture earth-sheltered buildings: Design Manual 1.4
NASA Astrophysics Data System (ADS)
1984-03-01
Design guidance is presented for use by experienced engineers and architects. The types of buildings within the scope of this manual include slab-on-grade, partially-buried (bermed) or fully-buried, and large (single-story or multistory) structures. New criteria unique to earth-sheltered design are included for the following disciplines: Planning, Landscape Design, Life-Cycle Analysis, Architectural, Structural, Mechanical (criteria include below-grade heat flux calculation procedures), and Electrical.
Improvement in gold grade from iron-oxide mineral using reduction roasting and magnetic separation
NASA Astrophysics Data System (ADS)
Kim, Hyun-soo; On, Hyun-sung; Lim, Dae-hack; Myung, Eun-ji; Park, Cheon-young
2017-04-01
Microwave has a wide range of applications in mineral technology, metallurgy, etc. It is an established fact that microwave energy has potential for the speedy and efficient heating of minerals and in a commercial context may provide savings in both time and energy. Microwave heating is being developed as a potential thermal pre-treatment process, because of its unique advantages over the differences of ore minerals in absorbing microwaves. The aim of this study was to investigate the improvement in Au grade from iron-oxide mineral using reduction roasting and magnetic separation. The characteristics of iron-oxide mineral were analyzed using chemical, XRD and reflected light microscopy. The reduction roasting using microwave and magnetic separation experiments were examined under various conditions (reducing agent and chemical additive). The results of XRD and reflected light microscopy showed that the iron-oxide mineral mainly composed of illite, quartz and hematite. The iron-oxide mineral had an Au, Ag, Fe contents of 6.4, 35.1 and 155,441.1 mg/kg, respectively. The results demonstrated that the improvement in Au by reduction roasting using microwave (frequency of 2.45GHz, intensity of 5kW) and magnetic separation (magnetic field intensity of 9,000 Gauss) were effective processes. The Au content in iron-oxide mineral from 6.4 mg/kg to 14.2 mg/kg was achieved within microwave exposure time of 10min (reducing agent(PAC) ratio = 50 : 50, 5% of chemical additive(Soda ash)). Acknowledgment : This subject is supported by Korea Ministry of Environment as "Advanced Technology Program for Environmental Industry"
Lacy, Joyce W.; Yassa, Michael A.; Stark, Shauna M.; Muftuler, L. Tugan; Stark, Craig E.L.
2011-01-01
Producing and maintaining distinct (orthogonal) neural representations for similar events is critical to avoiding interference in long-term memory. Recently, our laboratory provided the first evidence for separation-like signals in the human CA3/dentate. Here, we extended this by parametrically varying the change in input (similarity) while monitoring CA1 and CA3/dentate for separation and completion-like signals using high-resolution fMRI. In the CA1, activity varied in a graded fashion in response to increases in the change in input. In contrast, the CA3/dentate showed a stepwise transfer function that was highly sensitive to small changes in input. PMID:21164173
Bergknut, Niklas; Grinwis, Guy; Pickee, Emile; Auriemma, Edoardo; Lagerstedt, Anne-Sofie; Hagman, Ragnvi; Hazewinkel, Herman A W; Meij, Björn P
2011-07-01
To evaluate the reliability of the Thompson system for use in grading the gross pathological changes of intervertebral disk (IVD) degeneration in dogs and to investigate the agreement between gross pathological findings and low-field (0.2-T) magnetic resonance imaging (MRI) findings. Vertebral columns from cadavers of 19 dogs of various ages, breeds, and origins. 182 intervertebral segments were collected from 19 canine cadavers. Sagittal T2-weighted MRI of the T11 through S1 portion of the vertebral column was performed within 24 hours after the dogs were euthanized. The vertebral columns were subsequently divided in the midsagittal plane, and high-resolution photographs were obtained of each intervertebral segment (end plate-disk-end plate). The MRI images and photographs were graded separately in a blinded manner by 4 observers who used both Pfirrmann and Thompson grading criteria. The interobserver agreement for Thompson scores ranged from 0.76 to 0.88, and the intraobserver agreement ranged from 0.88 to 0.94 (Cohen weighted κ analysis). Agreement between scores for the Pfirrmann and Thompson grading criteria was κ = 0.70. Grading of IVD degeneration in dogs by use of the Thompson system resulted in high interobserver and intraobserver agreement, and scores for the Thompson system had substantial agreement with low-field MRI findings graded by use of the Pfirrmann system. This suggested that low-field MRI can be used to diagnose IVD degeneration in dogs.
Chiu, Kuo Yuan; Chang, Sheng Hsiung; Huang, Wei-Chen; Cheng, Hsin-Ming; Shaw, Hsin; Yeh, Shih-Chieh; Chen, Chin-Ti; Su, Yuhlong Oliver; Chen, Sheng-Hui; Wu, Chun-Guey
2018-07-27
A graded fullerene derivative thin film was used as a dual-functional electron transport layer (ETL) in CH 3 NH 3 PbI 3 (MAPbI 3 ) solar cells, to improve the fill factor (FF) and device stability. The graded ETL was made by mixing phenyl-C 61 -butyric acid methyl ester (PCBM) molecules and C 60 -diphenylmethanofullerene-oligoether (C 60 -DPM-OE) molecules using the spin-coating method. The formation of the graded ETLs can be due to the phase separation between hydrophobic PCBM and hydrophilic C 60 -DPM-OE, which was confirmed by XPS depth-profile analysis and an electron energy-loss spectroscope. Comprehensive studies were carried out to explore the characteristics of the graded ETLs in MAPbI 3 solar cells, including the surface properties, electronic energy levels, molecular packing properties and energy transfer dynamics. The elimination of the s-shape in the current density-voltage curves results in an increase in the FF, which originates from the smooth contact between the C 60 -DPM-OE and hydrophilic MAPbI 3 and the formation of the more ordered ETL. There was an improvement in device stability mainly due to the decrease in the photothermal induced morphology change of the graded ETLs fabricated from two fullerene derivatives with distinct hydrophilicity. Consequently, such a graded ETL provides dual-functional capabilities for the realization of stable high-performance MAPbI 3 solar cells.
Predicting features of breast cancer with gene expression patterns.
Lu, Xuesong; Lu, Xin; Wang, Zhigang C; Iglehart, J Dirk; Zhang, Xuegong; Richardson, Andrea L
2008-03-01
Data from gene expression arrays hold an enormous amount of biological information. We sought to determine if global gene expression in primary breast cancers contained information about biologic, histologic, and anatomic features of the disease in individual patients. Microarray data from the tumors of 129 patients were analyzed for the ability to predict biomarkers [estrogen receptor (ER) and HER2], histologic features [grade and lymphatic-vascular invasion (LVI)], and stage parameters (tumor size and lymph node metastasis). Multiple statistical predictors were used and the prediction accuracy was determined by cross-validation error rate; multidimensional scaling (MDS) allowed visualization of the predicted states under study. Models built from gene expression data accurately predict ER and HER2 status, and divide tumor grade into high-grade and low-grade clusters; intermediate-grade tumors are not a unique group. In contrast, gene expression data is inaccurate at predicting tumor size, lymph node status or LVI. The best model for prediction of nodal status included tumor size, LVI status and pathologically defined tumor subtype (based on combinations of ER, HER2, and grade); the addition of microarray-based prediction to this model failed to improve the prediction accuracy. Global gene expression supports a binary division of ER, HER2, and grade, clearly separating tumors into two categories; intermediate values for these bio-indicators do not define intermediate tumor subsets. Results are consistent with a model of regional metastasis that depends on inherent biologic differences in metastatic propensity between breast cancer subtypes, upon which time and chance then operate.
NASA Astrophysics Data System (ADS)
Chiu, Kuo Yuan; Hsiung Chang, Sheng; Huang, Wei-Chen; Cheng, Hsin-Ming; Shaw, Hsin; Yeh, Shih-Chieh; Chen, Chin-Ti; Su, Yuhlong Oliver; Chen, Sheng-Hui; Wu, Chun-Guey
2018-07-01
A graded fullerene derivative thin film was used as a dual-functional electron transport layer (ETL) in CH3NH3PbI3 (MAPbI3) solar cells, to improve the fill factor (FF) and device stability. The graded ETL was made by mixing phenyl-C61-butyric acid methyl ester (PCBM) molecules and C60-diphenylmethanofullerene-oligoether (C60-DPM-OE) molecules using the spin-coating method. The formation of the graded ETLs can be due to the phase separation between hydrophobic PCBM and hydrophilic C60-DPM-OE, which was confirmed by XPS depth-profile analysis and an electron energy-loss spectroscope. Comprehensive studies were carried out to explore the characteristics of the graded ETLs in MAPbI3 solar cells, including the surface properties, electronic energy levels, molecular packing properties and energy transfer dynamics. The elimination of the s-shape in the current density–voltage curves results in an increase in the FF, which originates from the smooth contact between the C60-DPM-OE and hydrophilic MAPbI3 and the formation of the more ordered ETL. There was an improvement in device stability mainly due to the decrease in the photothermal induced morphology change of the graded ETLs fabricated from two fullerene derivatives with distinct hydrophilicity. Consequently, such a graded ETL provides dual-functional capabilities for the realization of stable high-performance MAPbI3 solar cells.
Chen, Yao; Mohammadi, Moosa; Flanagan, John G.
2009-01-01
Summary Graded guidance labels are widely used in neural map formation, but it is not well understood which potential strategy leads to their graded expression. In midbrain tectal map development, FGFs can induce an entire midbrain, but their protein distribution is unclear, nor is it known whether they may act instructively to produce graded gene expression. Using a receptor-alkaline phosphatase fusion probe, we find a long-range posterior>anterior FGF protein gradient spanning the midbrain. Heparan sulfate proteoglycan (HSPG) is required for this gradient. To test whether graded FGF concentrations can instruct graded gene expression, a quantitative tectal explant assay was developed. Engrailed-2 and ephrin-As, normally in posterior>anterior tectal gradients, showed graded upregulation. Moreover, EphAs, normally in anterior>posterior countergradients, showed coordinately graded downregulation. These results provide a mechanism to establish graded mapping labels, and more generally provide a developmental strategy to coordinately induce a structure and pattern its cell properties in gradients. PMID:19555646
Exploring the Changes in Students' Understanding of the Scientific Method Using Word Associations
NASA Astrophysics Data System (ADS)
Gulacar, Ozcan; Sinan, Olcay; Bowman, Charles R.; Yildirim, Yetkin
2015-10-01
A study is presented that explores how students' knowledge structures, as related to the scientific method, compare at different student ages. A word association test comprised of ten total stimulus words, among them experiment, science fair, and hypothesis, is used to probe the students' knowledge structures. Students from grades four, five, and eight, as well as first-year college students were tested to reveal their knowledge structures relating to the scientific method. Younger students were found to have a naïve view of the science process with little understanding of how science relates to the real world. However, students' conceptions about the scientific process appear to be malleable, with science fairs a potentially strong influencer. The strength of associations between words is observed to change from grade to grade, with younger students placing science fair near the center of their knowledge structure regarding the scientific method, whereas older students conceptualize the scientific method around experiment.
Independent surgical validation of the new prostate cancer grade-grouping system.
Spratt, Daniel E; Cole, Adam I; Palapattu, Ganesh S; Weizer, Alon Z; Jackson, William C; Montgomery, Jeffrey S; Dess, Robert T; Zhao, Shuang G; Lee, Jae Y; Wu, Angela; Kunju, Lakshmi P; Talmich, Emily; Miller, David C; Hollenbeck, Brent K; Tomlins, Scott A; Feng, Felix Y; Mehra, Rohit; Morgan, Todd M
2016-11-01
To report the independent prognostic impact of the new prostate cancer grade-grouping system in a large external validation cohort of patients treated with radical prostatectomy (RP). Between 1994 and 2013, 3 694 consecutive men were treated with RP at a single institution. To investigate the performance of and validate the grade-grouping system, biochemical recurrence-free survival (bRFS) rates were assessed using Kaplan-Meier tests, Cox-regression modelling, and discriminatory comparison analyses. Separate analyses were performed based on biopsy and RP grade. The median follow-up was 52.7 months. The 5-year actuarial bRFS for biopsy grade groups 1-5 were 94.2%, 89.2%, 73.1%, 63.1%, and 54.7%, respectively (P < 0.001). Similarly, the 5-year actuarial bRFS based on RP grade groups was 96.1%, 93.0%, 74.0%, 64.4%, and 49.9% for grade groups 1-5, respectively (P < 0.001). The adjusted hazard ratios for bRFS relative to biopsy grade group 1 were 1.98, 4.20, 5.57, and 9.32 for groups 2, 3, 4, and 5, respectively (P < 0.001), and for RP grade groups were 2.09, 5.27, 5.86, and 10.42 (P < 0.001). The five-grade-group system had a higher prognostic discrimination compared with the commonly used three-tier system (Gleason score 6 vs 7 vs 8-10). In an independent surgical cohort, we have validated the prognostic benefit of the new prostate cancer grade-grouping system for bRFS, and shown that the benefit is maintained after adjusting for important clinicopathological variables. The greater predictive accuracy of the new system will improve risk stratification in the clinical setting and aid in patient counselling. © 2016 The Authors BJU International © 2016 BJU International Published by John Wiley & Sons Ltd.
Integrated Assessment for an Integrated Curriculum.
ERIC Educational Resources Information Center
Mockrish, Rob
1989-01-01
In a sixth grade science classroom for able students, major grades are broken down into four categories: lab reports, projects, creative writing, and written tests. These four components of assessment structure how the curriculum content is presented. (JDD)
DOE Office of Scientific and Technical Information (OSTI.GOV)
Liu Yong; Department of Materials Science and Engineering, University of Tennessee, Knoxville, TN 37996; Liu Fengxiao
Cemented carbides with a functionally graded structure have significantly improved mechanical properties and lifetimes in cutting, drilling and molding. In this work, WC-6 wt.% Co cemented carbides with three-layer graded structure (surface layer rich in WC, mid layer rich in Co and the inner part of the average composition) were prepared by carburizing pre-sintered {eta}-phase-containing cemented carbides. The three-point bending fatigue tests based on the total-life approach were conducted on both WC-6wt%Co functionally graded cemented carbides (FGCC) and conventional WC-6wt%Co cemented carbides. The functionally graded cemented carbide shows a slightly higher fatigue limit ({approx}100 MPa) than the conventional ones undermore » the present testing conditions. However, the fatigue crack nucleation behavior of FGCC is different from that of the conventional ones. The crack nucleates preferentially along the Co-gradient and perpendicular to the tension surface in FGCC, while parallel to the tension surface in conventional cemented carbides.« less
The effect of age and role information on expectations for big five personality traits.
Wood, Dustin; Roberts, Brent W
2006-11-01
In four studies, the authors investigated the extent to which expectations for personality traits in age-graded roles correspond to patterns of personality trait change across the life course. In Studies 1 (N = 43) and 2 (N = 126), the authors examined the age-graded roles of high school student, college student, parent, and grandparent and found that expectations for how people behave in these age-graded roles showed strong parallels to the documented pattern of personality trait development and that this pattern of expectations was largely shared by younger and older participants. In Studies 3 (N = 252) and 4 (N = 123), the authors separated age and role information (e.g., marital, parental, and employment status) and found that people use both sources of information independently in forming expectations of others. The implications for understanding the interplay of expectations and personality trait development are discussed.
Lagali, Neil; Edén, Ulla; Utheim, Tor Paaske; Chen, Xiangjun; Riise, Ruth; Dellby, Anette; Fagerholm, Per
2013-08-07
To investigate morphologic alterations in the limbal palisades of Vogt in a progressive form of limbal stem cell deficiency. Twenty Norwegian subjects (40 eyes) with congenital aniridia and 9 healthy family members (18 eyes) without aniridia were examined. Clinical grade of aniridia-related keratopathy (ARK) was assessed by slit-lamp biomicroscopy, and tear production and quality, corneal thickness, and sensitivity were additionally measured. The superior and inferior limbal palisades of Vogt and central cornea were examined by laser scanning in vivo confocal microscopy (IVCM). In an aniridia patient with grade 0 ARK, a transparent cornea and normal limbal palisade morphology were found. In grade 1 ARK, 5 of 12 eyes had degraded palisade structures. In the remaining grade 1 eyes and in all 20 eyes with stage 2, 3, and 4 ARK, palisade structures were absent by IVCM. Increasing ARK grade significantly correlated with reduced visual acuity and corneal sensitivity, increased corneal thickness, degree of degradation of superior and inferior palisade structures, reduced peripheral nerves, increased inflammatory cell invasion, and reduced density of basal epithelial cells and central subbasal nerves. Moreover, limbal basal epithelial cell density and central corneal subbasal nerve density were both significantly reduced in aniridia compared to healthy corneas (P = 0.002 and 0.003, respectively). Progression of limbal stem cell deficiency in aniridia correlates with degradation of palisade structures, gradual transformation of epithelial phenotype, onset of inflammation, and a corneal nerve deficit. IVCM can be useful in monitoring early- to late-stage degenerative changes in stem cell-deficient patients.
Anema, Johannes R; Steenstra, Ivan A; Bongers, Paulien M; de Vet, Henrica C W; Knol, Dirk L; Loisel, Patrick; van Mechelen, Willem
2007-02-01
Population-based randomized controlled trial. To assess the effectiveness of workplace intervention and graded activity, separately and combined, for multidisciplinary rehabilitation of low back pain (LBP). Effective components for multidisciplinary rehabilitation of LBP are not yet established. Participants sick-listed 2 to 6 weeks due to nonspecific LBP were randomized to workplace intervention (n = 96) or usual care (n = 100). Workplace intervention consisted of workplace assessment, work modifications, and case management involving all stakeholders. Participants still sick-listed at 8 weeks were randomized for graded activity (n = 55) or usual care (n = 57). Graded activity comprised biweekly 1-hour exercise sessions based on operant-conditioning principles. Outcomes were lasting return to work, pain intensity and functional status, assessed at baseline, and at 12, 26, and 52 weeks after the start of sick leave. Time until return to work for workers with workplace intervention was 77 versus 104 days (median) for workers without this intervention (P = 0.02). Workplace intervention was effective on return to work (hazard ratio = 1.7; 95% CI, 1.2-2.3; P = 0.002). Graded activity had a negative effect on return to work (hazard ratio = 0.4; 95% CI, 0.3-0.6; P < 0.001) and functional status. Combined intervention had no effect. Workplace intervention is advised for multidisciplinary rehabilitation of subacute LBP. Graded activity or combined intervention is not advised.
Evaluation of Risk Factors Affecting Substance Use among Tenth-Grade Students
Öztaş, Dilek; Kalyon, Aydan; Ertuğrul, Ayşin; Gündoğdu, Çetin; Balcıoğlu, Hüseyin; Sağlan, Yasemin; Karahan, Sevilay
2018-01-01
Aim The aim of this study is to detect the prevalence of substance use among tenth-grade students; their thoughts, attitudes, behaviors, and tendencies towards substance use; and risk factors of substance use in tenth-grade students in general. Methods This study is descriptive and cross-sectional conducted between April and May 2016. Research population consists of tenth-grade students in 2015-2016 school year in the city of Ordu. Since the study involved all tenth-grade students, no sampling was done. Questions on substance use were prepared by Ordu Public Health Directorate and the authors by making use of European School Survey Project on Alcohol and Other Drugs (ESPAD) study questions, AMATEM's “Drugs and Addiction Youth Survey” study conducted on May 1996, and scientific studies conducted previously on similar subjects. Results 9825 tenth-grade students in 88 schools from 19 counties in the city of Ordu were included in the study. 8714 of the students participated in the survey. Being male, being over the age of 15, mother and father being separated, living with relatives, being in low income, negative feelings about school, perception of being unsuccessful in school, failing a year, absenteeism, and not being content with life are the risk factors for substance use. Conclusions The tendency of illegal substance use becoming more and more prevalent especially among youth requires the development of new treatment strategies. PMID:29736390
Liu, Jason; Goldenberg, David; Almokadem, Salah; Crist, Henry; Mackley, Heath B
2017-07-01
There is currently no clear distinction between the treatment of HPV-positive and HPV-negative oropharyngeal squamous cell carcinoma (OPSCC). HPV-positive OPSCC has been demonstrated to be more radiosensitive than its HPV-negative counterpart. Despite this, patients with HPV-positive OPSCC continue to receive a full dose of radiation (70 Gy) outside clinical trials. However, this high dose comes with considerable morbidities, including severe mucositis, dysphagia, and xerostomia. We describe the cases of 2 patients with HPV-positive OPSCC who received two cycles of high-dose cisplatin at 100 mg/m 2 on 3 separate days, along with concurrent radiotherapy at 50 Gy in 25 fractions for one and 46 Gy in 23 fractions for the other. During treatment, both patients experienced significant acute-phase toxicities-including grade 3 mucositis, grade 3 nausea, and grade 2 dermatitis-and their treatment regimen was stopped before its planned completion. Nevertheless, after a follow-up of 75 and 78 months, respectively, neither patient exhibited any evidence of disease. Late toxicities included grade 1 xerostomia, grade 1 pharyngeal-phase dysphagia, and grade 1 dysgeusia with some foods. We conclude that de-escalating the dose of radiation for HPV-positive patients by 30% and identifying which patients can safely be treated with this level of dose reduction warrants further study.
Investigating the Effects of a Structured Writing Program in a Math Classroom: A Quantitative Study
ERIC Educational Resources Information Center
Girsa, Heather
2016-01-01
In a northeastern state eighth grade math students are struggling with meeting adequate yearly progress in math. The state's math proficiency in the school year 2013-2014 for eighth grade students showed that only 56% scored at grade level or above. The local problem addressed in this study is that 44% of a northeastern state's eighth graders are…
ERIC Educational Resources Information Center
Hurdle, Zachariah B.
2017-01-01
The purpose of the dissertation is to investigate three particular aspects that may affect the transition between a third grade Montessori system and a fourth grade non-Montessori system, specifically within the context of teaching and learning mathematics. These aspects are 1) the change in pacing and structure of the classroom, 2) the removal of…
Direct-write graded index materials realized in protein hydrogels
Kaehr, Bryan; Scrymgeour, David A.
2016-09-20
Here, the ability to create optical materials with arbitrary index distributions would prove transformative for optics design and applications. However, current fabrication techniques for graded index (GRIN) materials rely on diffusion profiles and therefore are unable to realize arbitrary distribution GRIN design. Here, we demonstrate the laser direct writing of graded index structures in protein-based hydrogels using multiphoton lithography. We show index changes spanning a range of 10 –2, which is comparable with laser densified glass and polymer systems. Further, we demonstrate the conversion of these written density variation structures into SiO 2, opening up the possibility of transforming GRINmore » hydrogels to a wide range of material systems.« less
Direct-write graded index materials realized in protein hydrogels
DOE Office of Scientific and Technical Information (OSTI.GOV)
Kaehr, Bryan; Scrymgeour, David A.
Here, the ability to create optical materials with arbitrary index distributions would prove transformative for optics design and applications. However, current fabrication techniques for graded index (GRIN) materials rely on diffusion profiles and therefore are unable to realize arbitrary distribution GRIN design. Here, we demonstrate the laser direct writing of graded index structures in protein-based hydrogels using multiphoton lithography. We show index changes spanning a range of 10 –2, which is comparable with laser densified glass and polymer systems. Further, we demonstrate the conversion of these written density variation structures into SiO 2, opening up the possibility of transforming GRINmore » hydrogels to a wide range of material systems.« less
Acheson, R J; Woerner, D R; Martin, J N; Belk, K E; Engle, T E; Brown, T R; Brooks, J C; Luna, A M; Thompson, L D; Grimes, H L; Arnold, A N; Savell, J W; Gehring, K B; Douglass, L W; Howe, J C; Patterson, K Y; Roseland, J M; Williams, J R; Cifelli, A; Leheska, J M; McNeill, S H
2015-12-01
Beef nutrition research has become increasingly important domestically and internationally for the beef industry and its consumers. The objective of this study was to analyze the nutrient composition of ten beef loin and round cuts to update the nutrient data in the USDA National Nutrient Database for Standard Reference. Seventy-two carcasses representing a national composite of Yield Grade, Quality Grade, sex classification, and genetic type were identified from six regions across the U.S. Beef short loins, strip loins, tenderloins, inside rounds, and eye of rounds (NAMP # 173, 175, 190A, 169A, and 171C) were collected from the selected carcasses and shipped to three university meat laboratories for storage, retail fabrication, and raw/cooked analysis of nutrients. Sample homogenates from each animal were analyzed for proximate composition. These data provide updated information regarding the nutrient status of beef, in addition, to determining the influence of Quality Grade, Yield Grade, and sex classification on nutrient composition. Copyright © 2015. Published by Elsevier Ltd.
Addressing overtreatment of screen detected DCIS; the LORIS trial.
Francis, Adele; Thomas, Jeremy; Fallowfield, Lesley; Wallis, Matthew; Bartlett, John M S; Brookes, Cassandra; Roberts, Tracy; Pirrie, Sarah; Gaunt, Claire; Young, Jennie; Billingham, Lucinda; Dodwell, David; Hanby, Andrew; Pinder, Sarah E; Evans, Andrew; Reed, Malcolm; Jenkins, Valerie; Matthews, Lucy; Wilcox, Maggie; Fairbrother, Patricia; Bowden, Sarah; Rea, Daniel
2015-11-01
Overdiagnosis, and thus overtreatment, are inevitable consequences of most screening programmes; identification of ways of minimising the impact of overdiagnosis demands new prospective research, in particular the need to separate clinically relevant lesions that require active treatment from those that can be safely left alone or monitored and only need treated if they change characteristics. Breast cancer screening has led to a large increase in ductal carcinoma in situ (DCIS) diagnoses. This is a widely heterogeneous disease and most DCIS detected through screening is of high cytonuclear grade and therefore likely to be important clinically. However, the historic practice of surgical treatment for all DCIS is unlikely to be optimal for lower risk patients. A clearer understanding of how to manage DCIS is required. This article describes the background and development of 'The low risk' DCIS trial (LORIS), a phase III trial of surgery versus active monitoring. LORIS will determine if it is appropriate to manage women with screen detected or asymptomatic, low grade and intermediate grade DCIS with low grade features, by active monitoring rather than by surgical treatment. Copyright © 2015 Elsevier Ltd. All rights reserved.
NASA Astrophysics Data System (ADS)
Pingitore, N. E.; Clague, J. W.; Gorski, D.
2013-12-01
Round Top Mountain is a surface-exposed peraluminous rhyolite laccolith, enriched in heavy rare earth elements, as well as niobium-tantalum, beryllium, lithium, fluorine, tin, rubidium, thorium, and uranium. The extreme extent of the deposit (diameter one mile) makes it a target for recovery of valuable yttrium and HREEs, and possibly other scarce elements. The Texas Bureau of Economic Geology estimated the laccolith mass as at least 1.6 billion tons. A Preliminary Economic Assessment for Texas Rare Earth Resources listed an inferred mineral resource of 430,598,000 kg REOs (rare earth oxides), with over 70% Y+HREEs (YHREE). Put in global perspective, China is thought to produce ~25,000 tons YHREE per year, and exports but a small fraction of that. Because of the extremely fine grain size of the late-phase fluorine-carried critical fluid mineralization, it has not been clear which minerals host the YHREEs. X-ray Absorption Spectroscopy experiments at the Stanford Synchrotron Radiation Lightsource revealed that virtually all of the YHREE content resides in yttrofluorite, rather than in the other reported REE minerals in the deposit, bastnaesite and xenotime. The extended x-ray absorption fine structure (XAFS) spectra of the sample suite were all quite similar, and proved a close match to known model compound specimens of yttrofluorite from two locations, in Sweden and New Mexico. Small spectral variation between the two model compounds and among the samples is attributable to the variable elemental composition and altervalent substitutional nature of yttrofluorite (Ca [1-x] Y,REE [x])F[2+x]. We found no other reported deposit in the world in which yttrofluorite is the exclusive, or even more than a minor, YHREE host mineral. Leaching experiments show that the YHREEs are easily liberated by dissolution with dilute sulfuric acid, due to the solubility of yttrofluorite. Flotation separation of the yttrofluorite had been demonstrated, but was rendered inefficient by the micron-scale grain size of the yttrofluorite. Our laboratory leaching experiments with different acid strengths, grain sizes, and exposure times showed up to 90% recovery of the YHREEs. As expected, similar recoveries were obtained from longer exposure times at lower sulfuric acid concentration. Optimal grain size is in the 2-10 mm range. Thus a heap leach of the deposit is likely feasible, aided by the fact that 90-95% of the rock comprises insoluble and unreactive quartz and feldspars. The absence of overburden, proximity (a few km) to an interstate highway and major rail systems, temperate climate, and favorable political location enhance the potential and appeal for development of a heap leach operation. The grade of the deposit is just over 0.05% total rare earth elements plus yttrium. Although some might consider this sub-economic, it is in the range of the South China ionic clay deposits that supply essentially all of the world's YHREEs. Further, the grade is remarkably consistent through 1657 samples from 64 reverse-circulation drill holes with a total sampled interval of 30,353 feet. This consistency of grade permits accurate economic assessment and prediction, an unchanging ore grade and mine feedstock over life of mine, and a single REE separation chemistry to be developed. Thus mine and separation procedures need only be developed and optimized once.
Zhang, Yali; Li, Huaimei; Yu, Xianjin
2012-04-30
Cyanide tailing is a kind of solid waste produced in the process of gold extraction from gold ore. In this paper, recovery of iron from cyanide tailings was studied with reduction roasting-water leaching process followed by magnetic separation. After analysis of chemical composition and crystalline phase, the effects of different parameters on recovery of iron were chiefly introduced. Systematic studies indicate that the high recovery rate and grade of magnetic concentrate of iron can be achieved under the following conditions: weight ratios of cyanide tailings/activated carbon/sodium carbonate/sodium sulfate, 100:10:3:10; temperature, 50 °C; time, 60 min at the reduction roasting stage; the liquid to solid ratio is 15:1 (ml/g), leaching at 60 °C for 5 min and stirring speed at 20 r/min at water-leaching; exciting current is 2A at magnetic separation. The iron grade of magnetic concentrate was 59.11% and the recovery ratio was 75.12%. The mineralography of cyanide tailings, roasted product, water-leached sample, magnetic concentrate and magnetic tailings were studied by X-ray powder diffraction (XRD) technique. The microstructures of above products except magnetic tailings were also analyzed by scanning electron microscope (SEM) and energy disperse spectroscopy (EDS) to help understand the mechanism. Copyright © 2012 Elsevier B.V. All rights reserved.
ERIC Educational Resources Information Center
Silvey, Brian A.; Koerner, Bryan D.
2016-01-01
We investigated the effects of expressive and unexpressive conducting on secondary school band members' and experts' audio evaluations of band performance expressivity. A conductor, who demonstrated either expressive or unexpressive conducting techniques, led both an eighth-grade and a high school band in four separate "run-throughs" of…
Development of Conceptually Focused Early Numeracy Skill Indicators
ERIC Educational Resources Information Center
Methe, Scott A.; Begeny, John C.; Leary, Lemontrel L.
2011-01-01
This research was conducted to evaluate the technical properties of a set of early numeracy CBM tests that were designed to operationalize early numeric concepts. Data were collected over the course of a school year from 113 kindergarten and first-grade children using nine separate tests with three alternative forms. In addition, test-retest…
Changing Perceptions of Unpopular Animals through Facts, Poetry, Crafts, and Puppet Plays
ERIC Educational Resources Information Center
Rule, Audrey C.; Zhbanova, Ksenia S.
2012-01-01
Today's children are often separated from the natural world, developing fear and aversion to wild creatures. This humane education program used curriculum-blended science lessons that focused on eight generally disliked animals: bat, skunk, snake, mouse, spider, centipede, cockroach, and mosquito. First and second grade students participated in 6…
Metrics for Good Measure. Level III. Instructor's Guide.
ERIC Educational Resources Information Center
Cooper, Gloria S.; And Others
This guide and the accompanying student workbook (separate document) comprise the Adult Basic Education Level III (grades 7, 8, and 9) package on the metric system. An introductory section provides background information on adult basic daily living skills, a discussion of the design and use of the student workbook, and information on what the…
Metrics for Good Measure. Level II. Instructor's Guide.
ERIC Educational Resources Information Center
Cooper, Gloria S.; And Others
This guide and the accompanying student workbook (separate document) comprise the Adult Basic Education Level II (grades 4, 5, and 6) package on the metric system. An introductory section provides background information on adult basic daily living skills, a discussion of the design and use of the student workbook, and information on what the…
Exploration of Public Service Occupations. Curriculum Guide.
ERIC Educational Resources Information Center
California State Dept. of Education, Sacramento. Div. of Vocational Education.
The guide contains the basic concepts and instructional materials recommended for the exploration of public service occupations at the junior high school level (grades 7-9). The materials can be used as a separate course or can be integrated into the subject areas suggested. The 17 units deal with the functioning of Federal, State, and local…
Grouping Pupils for Language Arts Instruction.
ERIC Educational Resources Information Center
Ediger, Marlow
A major task involved in teaching pupils is to group them wisely for instruction. Most elementary schools group learners in terms of a self-contained classroom. While it may seem extreme, all curriculum areas on each grade in the elementary school may be departmentalized. In some ways, departmentalization harmonizes more with a separate subjects…
ERIC Educational Resources Information Center
Besnard, Therese; Verlaan, Pierrette; Davidson, Marilyne; Vitaro, Frank; Poulin, Francois; Capuano, France
2013-01-01
Empirical evidence suggests that children's disruptive behaviour (CDB) and quality of parenting influence one another bidirectionally. However, few studies have considered the separate contribution of the mother--child and father--child relationships to disruptive behaviours within a longitudinal context. Against this background, the reciprocal…
The Danger of Poison. Level 4 = El Veneno es Peligroso. [Nivel 4.
ERIC Educational Resources Information Center
Pennsylvania State Dept. of Education, Harrisburg.
Developed especially for migrant children, this field-tested curriculum teaches the benefits and hazards of pesticides to intermediate grade students. Materials, prepared in Spanish and English, can be used as a separate science/health unit on pesticides or integrated into the regular math and reading curriculum. Topics include benefits of…
The Effect of Contextual and Conceptual Rewording on Mathematical Problem-Solving Performance
ERIC Educational Resources Information Center
Haghverdi, Majid; Wiest, Lynda R.
2016-01-01
This study shows how separate and combined contextual and conceptual problem rewording can positively influence student performance in solving mathematical word problems. Participants included 80 seventh-grade Iranian students randomly assigned in groups of 20 to three experimental groups involving three types of rewording and a control group. All…
Arts and Cultural Education at School in Europe. Lithuania 2007/08
ERIC Educational Resources Information Center
Siaulytiene, Dalia
2008-01-01
Artistic education at general education schools in Lithuania is organised by teaching separate art subjects. Art education based on the integrated approach or project method may be organized at primary school, in grades one to four, according to the individual curriculum prepared by the teacher. Arts subjects included in Lithuanian arts curriculum…
34 CFR Appendix C to Part 300 - National Instructional Materials Accessibility Standard (NIMAS)
Code of Federal Regulations, 2011 CFR
2011-07-01
.... Using educationLevel obviates the need for a separate field for gradeRange since dc elements can repeat... 34 Education 2 2011-07-01 2010-07-01 true National Instructional Materials Accessibility Standard (NIMAS) C Appendix C to Part 300 Education Regulations of the Offices of the Department of Education...
Effects of Direct Teaching Using Creative Memorization Strategies To Improve Math Achievement.
ERIC Educational Resources Information Center
Bielsker, Staci; Napoli, Lori; Sandino, Melissa; Waishwell, Lesa
This report describes a program for enhancing direct teaching using creative memorization strategies in order to improve retention and quick retrieval of math facts. The targeted population consisted of first and second grade students in two separate districts in middle class communities. Analysis of probable cause data revealed that students were…
Group by Subject or by Ability? Tertiary Mathematics for Engineering Students
ERIC Educational Resources Information Center
Plank, Michael; James, Alex; Hannah, John
2011-01-01
The mathematics topics taught to engineering students at university are ostensibly no different to those taught to mathematics majors, so should these students be taught together or separately? Should engineering students be segregated by ability in their mathematics classes? This study analyses the grades of over 1000 engineering students, and…