HYSEP: A Computer Program for Streamflow Hydrograph Separation and Analysis

USGS Publications Warehouse

Sloto, Ronald A.; Crouse, Michele Y.

1996-01-01

HYSEP is a computer program that can be used to separate a streamflow hydrograph into base-flow and surface-runoff components. The base-flow component has traditionally been associated with ground-water discharge and the surface-runoff component with precipitation that enters the stream as overland runoff. HYSEP includes three methods of hydrograph separation that are referred to in the literature as the fixed interval, sliding-interval, and local-minimum methods. The program also describes the frequency and duration of measured streamflow and computed base flow and surface runoff. Daily mean stream discharge is used as input to the program in either an American Standard Code for Information Interchange (ASCII) or binary format. Output from the program includes table,s graphs, and data files. Graphical output may be plotted on the computer screen or output to a printer, plotter, or metafile.

Metadata requirements for results of diagnostic imaging procedures: a BIIF profile to support user applications

NASA Astrophysics Data System (ADS)

Brown, Nicholas J.; Lloyd, David S.; Reynolds, Melvin I.; Plummer, David L.

2002-05-01

A visible digital image is rendered from a set of digital image data. Medical digital image data can be stored as either: (a) pre-rendered format, corresponding to a photographic print, or (b) un-rendered format, corresponding to a photographic negative. The appropriate image data storage format and associated header data (metadata) required by a user of the results of a diagnostic procedure recorded electronically depends on the task(s) to be performed. The DICOM standard provides a rich set of metadata that supports the needs of complex applications. Many end user applications, such as simple report text viewing and display of a selected image, are not so demanding and generic image formats such as JPEG are sometimes used. However, these are lacking some basic identification requirements. In this paper we make specific proposals for minimal extensions to generic image metadata of value in various domains, which enable safe use in the case of two simple healthcare end user scenarios: (a) viewing of text and a selected JPEG image activated by a hyperlink and (b) viewing of one or more JPEG images together with superimposed text and graphics annotation using a file specified by a profile of the ISO/IEC Basic Image Interchange Format (BIIF).

Directory interchange format manual, version 3.0

NASA Technical Reports Server (NTRS)

1990-01-01

The Directory Interchange Format (DIF) is a data structure used to exchange directory level information about data sets among information systems. The format consists of a number of fields that describe the attributes of a directory entry and text blocks that contain a descriptive summary of and references for the directory entry. All fields and the summary are preceded by labels identifying their contents. All values are ASCII character strings. The structure is intended to be flexible, allowing for future changes in the contents of directory entries.

Processing biological literature with customizable Web services supporting interoperable formats.

PubMed

Rak, Rafal; Batista-Navarro, Riza Theresa; Carter, Jacob; Rowley, Andrew; Ananiadou, Sophia

2014-01-01

Web services have become a popular means of interconnecting solutions for processing a body of scientific literature. This has fuelled research on high-level data exchange formats suitable for a given domain and ensuring the interoperability of Web services. In this article, we focus on the biological domain and consider four interoperability formats, BioC, BioNLP, XMI and RDF, that represent domain-specific and generic representations and include well-established as well as emerging specifications. We use the formats in the context of customizable Web services created in our Web-based, text-mining workbench Argo that features an ever-growing library of elementary analytics and capabilities to build and deploy Web services straight from a convenient graphical user interface. We demonstrate a 2-fold customization of Web services: by building task-specific processing pipelines from a repository of available analytics, and by configuring services to accept and produce a combination of input and output data interchange formats. We provide qualitative evaluation of the formats as well as quantitative evaluation of automatic analytics. The latter was carried out as part of our participation in the fourth edition of the BioCreative challenge. Our analytics built into Web services for recognizing biochemical concepts in BioC collections achieved the highest combined scores out of 10 participating teams. Database URL: http://argo.nactem.ac.uk. © The Author(s) 2014. Published by Oxford University Press.

Processing biological literature with customizable Web services supporting interoperable formats

PubMed Central

Rak, Rafal; Batista-Navarro, Riza Theresa; Carter, Jacob; Rowley, Andrew; Ananiadou, Sophia

2014-01-01

Web services have become a popular means of interconnecting solutions for processing a body of scientific literature. This has fuelled research on high-level data exchange formats suitable for a given domain and ensuring the interoperability of Web services. In this article, we focus on the biological domain and consider four interoperability formats, BioC, BioNLP, XMI and RDF, that represent domain-specific and generic representations and include well-established as well as emerging specifications. We use the formats in the context of customizable Web services created in our Web-based, text-mining workbench Argo that features an ever-growing library of elementary analytics and capabilities to build and deploy Web services straight from a convenient graphical user interface. We demonstrate a 2-fold customization of Web services: by building task-specific processing pipelines from a repository of available analytics, and by configuring services to accept and produce a combination of input and output data interchange formats. We provide qualitative evaluation of the formats as well as quantitative evaluation of automatic analytics. The latter was carried out as part of our participation in the fourth edition of the BioCreative challenge. Our analytics built into Web services for recognizing biochemical concepts in BioC collections achieved the highest combined scores out of 10 participating teams. Database URL: http://argo.nactem.ac.uk. PMID:25006225

Experimental Surface Pressure Data Obtained on 65 deg Delta Wing Across Reynolds Number and Mach Number Ranges. Volume 2; Small-Radius Leading Edge

NASA Technical Reports Server (NTRS)

Chu, Julio; Luckring, James M.

1996-01-01

An experimental wind tunnel test of a 65 deg. delta wing model with interchangeable leading edges was conducted in the Langley National Transonic Facility (NTF). The objective was to investigate the effects of Reynolds and Mach numbers on slender-wing leading-edge vortex flows with four values of wing leading-edge bluntness. Experimentally obtained pressure data are presented without analysis in tabulated and graphical formats across a Reynolds number range of 6 x 10(exp 6) to 84 x 10(exp 6) at a Mach number of 0.85 and across a Mach number range of 0.4 to 0.9 at Reynolds numbers of 6 x 10(exp 6) and 60 x 10(exp 6). Normal-force and pitching-moment coefficient plots for these Reynolds number and Mach number ranges are also presented.

Experimental Surface Pressure Data Obtained on 65 deg Delta Wing Across Reynolds Number and Mach Number Ranges. Vol. 4: Large-radius leading edge

NASA Technical Reports Server (NTRS)

Chu, Julio; Luckring, James M.

1996-01-01

An experimental wind tunnel test of a 65 deg delta wing model with interchangeable leading edges was conducted in the Langley National Transonic Facility (NTF). The objective was to investigate the effects of Reynolds and Mach numbers on slender-wing leading-edge vortex flows with four values of wing leading-edge bluntness. Experimentally obtained pressure data are presented without analysis in tabulated and graphical formats across a Reynolds number range of 6 x 10(exp 6) to 120 x 10(exp 6) at a Mach number of 0.85 and across a Mach number range of 0.4 to 0.9 at Reynolds numbers of 6 x 10(exp 6) and 60 x 10(exp 6). Normal-force and pitching-moment coefficient plots for these Reynolds number and Mach number ranges are also presented.

Experimental Surface Pressure Data Obtained on 65 deg Delta Wing Across Reynolds Number and Mach Number Ranges. Vol. 3: Medium-radius leading edge

NASA Technical Reports Server (NTRS)

Chu, Julio; Luckring, James M.

1996-01-01

An experimental wind tunnel test of a 65 deg delta wing model with interchangeable leading edges was conducted in the Langley National Transonic Facility (NTF). The objective was to investigate the effects of Reynolds and Mach numbers on slender-wing leading-edge vortex flows with four values of wing leading-edge bluntness. Experimentally obtained pressure data are presented without analysis in tabulated and graphical formats across a Reynolds number range of 6 x 10(exp 6) to 120 x 10(exp 6) at a Mach number of 0.85 and across a Mach number range of 0.4 to 0.9 at Reynolds numbers of 6 x 10(exp 6), 60 x 10(exp 6), and 120 x 10(exp 6). Normal-force and pitching-moment coefficient plots for these Reynolds number and Mach number ranges are also presented.

Experimental Surface Pressure Data Obtained on 65 deg Delta Wing Across Reynolds Number and Mach Number Ranges. Volume 1; Sharp Leading Edge; [conducted in the Langley National Transonic Facility (NTF)

NASA Technical Reports Server (NTRS)

Chu, Julio; Luckring, James M.

1996-01-01

An experimental wind tunnel test of a 65 deg delta wing model with interchangeable leading edges was conducted in the Langley National Transonic Facility (NTF). The objective was to investigate the effects of Reynolds and Mach numbers on slender-wing leading-edge vortex flows with four values of wing leading-edge bluntness. Experimentally obtained pressure data are presented without analysis in tabulated and graphical formats across a Reynolds number range of 6 x 10(exp 6) to 36 x 10(exp 6) at a Mach number of 0.85 and across a Mach number range of 0.4 to 0.9 at a Reynolds number of 6 x 10(exp 6). Normal-force and pitching-moment coefficient plots for these Reynolds number and Mach number ranges are also presented.

Formation and evolution of quasi-interchange convection cell on the HL-2A tokamak

NASA Astrophysics Data System (ADS)

Shi, P. W.; Chen, W.; Shi, Z. B.; Duan, X. R.; Zhong, W. L.; Jiang, M.; Yang, Z. C.; Yu, L. M.; Wen, J.; Liang, A. S.; Yu, D. L.; Liu, Y.; Yang, Q. W.

2018-06-01

Formation and evolution of quasi-interchange convection cell have been observed for the first time by an electron cyclotron emission imaging (ECEI) system on the HL-2A tokamak. The instability with mode numbers of m/n = -1/-1 and a frequency of 2-4 kHz propagates in the electron diamagnetic drift direction. The mode downgrades the inner stored energy WE and enhances the divertor Hα signal, which indicates a degradation of plasma confinement. The ECEI reveals that the colder core temperature fluctuation distorts to a crescent shape, while a bubble originates from hot fluctuation gradually and draws into the concave side of the crescent. A finger-like structure can be observed during the convection process, and it presents a typical feature of the quasi-interchange model. The radial structure of the interchange mode obtained from electron cyclotron emission is quite narrow at the high field side but relatively wider at the low field side. Further analysis suggests that the discharge parameters are favorable for the excitation of interchange mode, and the stability criterion is violated in the core region. Moreover, the experimental frequency agrees with that given by the linear dispersion relation of interchange instability. The large grow rate suggests that the mode grows on a very short time scale.

A format for the interchange of scheduling models

NASA Technical Reports Server (NTRS)

Jaap, John P.; Davis, Elizabeth K.

1994-01-01

In recent years a variety of space-activity schedulers have been developed within the aerospace community. Space-activity schedulers are characterized by their need to handle large numbers of activities which are time-window constrained and make high demands on many scarce resources, but are minimally constrained by predecessor/successor requirements or critical paths. Two needs to exchange data between these schedulers have materialized. First, there is significant interest in comparing and evaluating the different scheduling engines to ensure that the best technology is applied to each scheduling endeavor. Second, there is a developing requirement to divide a single scheduling task among different sites, each using a different scheduler. In fact, the scheduling task for International Space Station Alpha (ISSA) will be distributed among NASA centers and among the international partners. The format used to interchange scheduling data for ISSA will likely use a growth version of the format discussed in this paper. The model interchange format (or MIF, pronounced as one syllable) discussed in this paper is a robust solution to the need to interchange scheduling requirements for space activities. It is highly extensible, human-readable, and can be generated or edited with common text editors. It also serves well the need to support a 'benchmark' data case which can be delivered on any computer platform.

Directory interchange format manual, version 4.0

NASA Technical Reports Server (NTRS)

1991-01-01

The Directory Interchange Format (DIF) is a data structure used to exchange directory-level information about data sets among information systems. In general the format consists of a number of fields that describe the attributes of a directory entry and text blocks that contain a descriptive summary of and references for the directory entry. All fields and the summary are preceded by labels identifying their contents. All values are ASCII character strings. The structure is intended to be flexible, allowing for future changes in the contents of directory entries. The manual is structured as follows: section 1 is a general description of what constitutes a directory entry; section 2 describes the content of the individual fields within the data structure, together with some examples. Also included in the six appendices is a description of the syntax used within the examples; samples of the directory interchange format applied to different data sets; the allowable discipline keywords; a current list of valid location keywords; a list of allowable parameter keywords; a list of acronyns and a glossary of terms used; and a description of the Standard Formatted Data Unit header, which may be added to the front of a DIF file to identify the file as a registered standard format.

Interchanging lexical information for a multilingual dictionary.

PubMed

Baud, R H; Nyström, M; Borin, L; Evans, R; Schulz, S; Zweigenbaum, P

2005-01-01

To facilitate the interchange of lexical information for multiple languages in the medical domain. To pave the way for the emergence of a generally available truly multilingual electronic dictionary in the medical domain. An interchange format has to be neutral relative to the target languages. It has to be consistent with current needs of lexicon authors, present and future. An active interaction between six potential authors aimed to determine a common denominator striking the right balance between richness of content and ease of use for lexicon providers. A simple list of relevant attributes has been established and published. The format has the potential for collecting relevant parts of a future multilingual dictionary. An XML version is available. This effort makes feasible the exchange of lexical information between research groups. Interchange files are made available in a public repository. This procedure opens the door to a true multilingual dictionary, in the awareness that the exchange of lexical information is (only) a necessary first step, before structuring the corresponding entries in different languages.

Modernization of Defense Logistics Standard Systems. Establishing the Functional Baseline. Volume 2. Appendix H

DTIC Science & Technology

1991-09-01

and "DD" is the numeric value of the day (01-31). [61 Time ( TM ). The time type is symbolized by the representation " TM ." Format for this type is...VERSION ID M DT 06/06 M TM 04/04 M ID 01/01 M ID 05/05 ISA13 112 ISA14 113 ISA15 114 ISA16 115INTERCHANGE *ACKNOWLEDG. * S1TEST 14 * SUBELEMENT N CTRL...Max - 6 Date of the interchange. DLMS Usage: As above. 109 Interchange Time Type - TM Min - 4 Max - 4 Time of the interchange. DLMS Usage: As above

Security architecture for HL/7 message interchange.

PubMed

Chen, T S; Liao, B S; Lin, M G; Gough, T G

2001-01-01

The promotion of quality medical treatment is very important to the healthcare providers as well as to patients. It requires that the medical resources of different hospitals be combined to ensure that medical information is shared and that resources are not wasted. A computer-based patient record is one of the best methods to accomplish the interchange of the patient's clinical data. In our system, the Health Level/Seven (HL/7) format is used for the interchange of the clinical data, as it has been supported by many healthcare providers and become a â standard'. The security of the interchange of clinical data is a serious issue for people using the Internet for data communication. Several international well-developed security algorithms, models and secure policies are adopted in the design of a security handler for an HL/7 architecture. The goal of our system is to combine our security system with the end-to-end communication systems constructed from the HL/7 format to establish a safe delivery channel. A suitable security interchange environment is implemented to address some shortcomings in clinical data interchange. located at the application layer of the ISO/OSI reference model. The medical message components, sub-components, and related types of message event are the primary goals of the HL/7 protocols. The patient management system, the doctor's system for recording his advice, examination and diagnosis as well as any financial management system are all covered by the HL/7 protocols. Healthcare providers and hospitals in Taiwan are very interested in developing the HL/7 protocols as a common standard for clinical data interchange.

Electronic Data Interchange: Using Technology to Exchange Transcripts.

ERIC Educational Resources Information Center

Stewart, John T.

1994-01-01

Describes the Florida Automated System for Transferring Educational Records (FASTER) project, which permits the electronic exchange of student transcripts; uses of similar electronic data interchange (EDI) programs in other states; and the national SPEEDE/ExPRESS project, which uses a standard format for transferring electronic transcripts.…

Electronic Data Interchange: Selected Issues and Trends.

ERIC Educational Resources Information Center

Wigand, Rolf T.; And Others

1993-01-01

Describes electronic data interchange (EDI) as the application-to-application exchange of business documents in a computer-readable format. Topics discussed include EDI in various industries, EDI in finance and banking, organizational impacts of EDI, future EDI markets and organizations, and implications for information resources management.…

Coalition Network Defence Common Operational Picture

DTIC Science & Technology

2010-11-01

27000 .org/ iso -27005.htm [26] ISO 8601:2004, Data elements and interchange formats - Information interchange - Representation of dates and times, http://ww.iso.org, http://en.wikipedia.org/wiki/ISO_8601 ...Regular_expression [25] ISO /IEC 27005:2008, Information technology -- Security techniques -- Information security risk management, http://ww.iso.org,; http://www

SPLICER - A GENETIC ALGORITHM TOOL FOR SEARCH AND OPTIMIZATION, VERSION 1.0 (MACINTOSH VERSION)

NASA Technical Reports Server (NTRS)

Wang, L.

1994-01-01

SPLICER is a genetic algorithm tool which can be used to solve search and optimization problems. Genetic algorithms are adaptive search procedures (i.e. problem solving methods) based loosely on the processes of natural selection and Darwinian "survival of the fittest." SPLICER provides the underlying framework and structure for building a genetic algorithm application. These algorithms apply genetically-inspired operators to populations of potential solutions in an iterative fashion, creating new populations while searching for an optimal or near-optimal solution to the problem at hand. SPLICER 1.0 was created using a modular architecture that includes a Genetic Algorithm Kernel, interchangeable Representation Libraries, Fitness Modules and User Interface Libraries, and well-defined interfaces between these components. The architecture supports portability, flexibility, and extensibility. SPLICER comes with all source code and several examples. For instance, a "traveling salesperson" example searches for the minimum distance through a number of cities visiting each city only once. Stand-alone SPLICER applications can be used without any programming knowledge. However, to fully utilize SPLICER within new problem domains, familiarity with C language programming is essential. SPLICER's genetic algorithm (GA) kernel was developed independent of representation (i.e. problem encoding), fitness function or user interface type. The GA kernel comprises all functions necessary for the manipulation of populations. These functions include the creation of populations and population members, the iterative population model, fitness scaling, parent selection and sampling, and the generation of population statistics. In addition, miscellaneous functions are included in the kernel (e.g., random number generators). Different problem-encoding schemes and functions are defined and stored in interchangeable representation libraries. This allows the GA kernel to be used with any representation scheme. The SPLICER tool provides representation libraries for binary strings and for permutations. These libraries contain functions for the definition, creation, and decoding of genetic strings, as well as multiple crossover and mutation operators. Furthermore, the SPLICER tool defines the appropriate interfaces to allow users to create new representation libraries. Fitness modules are the only component of the SPLICER system a user will normally need to create or alter to solve a particular problem. Fitness functions are defined and stored in interchangeable fitness modules which must be created using C language. Within a fitness module, a user can create a fitness (or scoring) function, set the initial values for various SPLICER control parameters (e.g., population size), create a function which graphically displays the best solutions as they are found, and provide descriptive information about the problem. The tool comes with several example fitness modules, while the process of developing a fitness module is fully discussed in the accompanying documentation. The user interface is event-driven and provides graphic output in windows. SPLICER is written in Think C for Apple Macintosh computers running System 6.0.3 or later and Sun series workstations running SunOS. The UNIX version is easily ported to other UNIX platforms and requires MIT's X Window System, Version 11 Revision 4 or 5, MIT's Athena Widget Set, and the Xw Widget Set. Example executables and source code are included for each machine version. The standard distribution media for the Macintosh version is a set of three 3.5 inch Macintosh format diskettes. The standard distribution medium for the UNIX version is a .25 inch streaming magnetic tape cartridge in UNIX tar format. For the UNIX version, alternate distribution media and formats are available upon request. SPLICER was developed in 1991.

Interchanging Lexical Information for a Multilingual Dictionary

PubMed Central

Baud, RH; Nyström, M; Borin, L; Evans, R; Schulz, S; Zweigenbaum, P

2005-01-01

Objective To facilitate the interchange of lexical information for multiple languages in the medical domain. To pave the way for the emergence of a generally available truly multilingual electronic dictionary in the medical domain. Methods An interchange format has to be neutral relative to the target languages. It has to be consistent with current needs of lexicon authors, present and future. An active interaction between six potential authors aimed to determine a common denominator striking the right balance between richness of content and ease of use for lexicon providers. Results A simple list of relevant attributes has been established and published. The format has the potential for collecting relevant parts of a future multilingual dictionary. An XML version is available. Conclusion This effort makes feasible the exchange of lexical information between research groups. Interchange files are made available in a public repository. This procedure opens the door to a true multilingual dictionary, in the awareness that the exchange of lexical information is (only) a necessary first step, before structuring the corresponding entries in different languages. PMID:16778996

Efficient XML Interchange (EXI) Compression and Performance Benefits: Development, Implementation and Evaluation

DTIC Science & Technology

2010-03-01

to a graphics card , and not the redesign of XML. The justification is that if XML is going to be prevalent, special optimized hardware is...the answer, similar to the specialized functions of a video card .  Given the Moore’s law that processing power doubles every few years, let the...and numerous multimedia players such as iTunes from Apple. These applications are free to use, but the source is restricted by software licenses

Annual Report of the Secretary of Defense to the President and the Congress, January 1994

DTIC Science & Technology

1994-01-01

latftoirm. This iJl id-..s such basic ,,SC-vice.,S as voice, video , data, imagery, and graphics transmission, as well as organi/.ational and individual...messaging, video -teleconferencing, and electronic data interchange. Overarchin e the system are standardization, security, and technology insertion...WTli (’ pedo shldlow watecr upgradiing, and improvements to the Standoffl’Lind Attatck Missile for1 stI~ke’-IL’IlCer ai ra iit. NAVAL. AVIATION

Lightweight application for generating clinical research information systems: MAGIC.

PubMed

Leskošek, Brane; Pajntar, Marjan

2015-12-01

Our purpose was to build and test a lightweight solution for generating clinical research information systems (CRIS) that would allow non-IT professionals with basic knowledge of computer usage to quickly define and build a ready-to-use, safe and secure web-based clinical research system for data management. We use the acronym MAGIC (Medical Application Generator InteraCtive) for the system. The generated CRIS should be very easy to build and use, so a common LAMP (Linux Apache MySQL Perl) platform was used, which also enables short development cycles. The application was built and tested using eXtreme Programming (XP) principles by a small development team consisting of one informatics specialist, one physician and one graphical designer/programmer. The parameter and graphical user interface (GUI) definitions for the CRIS can be made by non-IT professionals using an intuitive English-language-like formalism called application definition language (ADL). From these definitions, the MAGIC builds an end-user CRIS that can be used on a wide variety of platforms (from standard workstations to hand-held devices). A working example of a national health-care-quality assessment program is presented to illustrate this process. The lightweight application for generating CRIS (MAGIC) has proven to be useful for both clinical and analytical users in real working environment. To achieve better performance and interoperability, we are planning to recompile the application using XML schemas (XSD) in HL7 CDA or openEHR archetypes formats used for parameters definition and for data interchange between different information systems.

Working with the HL7 metamodel in a Model Driven Engineering context.

PubMed

Martínez-García, A; García-García, J A; Escalona, M J; Parra-Calderón, C L

2015-10-01

HL7 (Health Level 7) International is an organization that defines health information standards. Most HL7 domain information models have been designed according to a proprietary graphic language whose domain models are based on the HL7 metamodel. Many researchers have considered using HL7 in the MDE (Model-Driven Engineering) context. A limitation has been identified: all MDE tools support UML (Unified Modeling Language), which is a standard model language, but most do not support the HL7 proprietary model language. We want to support software engineers without HL7 experience, thus real-world problems would be modeled by them by defining system requirements in UML that are compliant with HL7 domain models transparently. The objective of the present research is to connect HL7 with software analysis using a generic model-based approach. This paper introduces a first approach to an HL7 MDE solution that considers the MIF (Model Interchange Format) metamodel proposed by HL7 by making use of a plug-in developed in the EA (Enterprise Architect) tool. Copyright © 2015 Elsevier Inc. All rights reserved.

The visual analogue thermometer and the graphic numeric rating scale: a comparison of self-report instruments for pain measurement in adults with burns.

PubMed

de Jong, A E E; Bremer, M; Hofland, H W C; Schuurmans, M J; Middelkoop, E; van Loey, N E E

2015-03-01

To evaluate the adequacy of pain management in burn care, pain measurement is essential. The visual analogue thermometer (VAT) and graphic numeric rating scale (GNRS) are frequently used self-report instruments for burn pain. To legitimise their interchangeable use in research and practice, we aimed to compare self-reports obtained by the VAT and GNRS, the ability of the scales to differentiate background from procedural pain, and to compare potential cutpoints. Adults with acute burns (N=319) participated in the study (67% male, mean age 40.3 years (SD 16), mean TBSA 9.9% (SD 10.4). Correlation coefficients between VAT and GNRS were 0.64 and 0.55 for, respectively, morning and afternoon background pain and 0.51 for procedural pain (p<0.01). VAT scores were lower than GNRS scores for all pain types (p<0.01). Both scales could differentiate background from procedural pain: procedural pain was higher (p<0.01). The standardized response mean was moderate (0.518 for VAT and 0.571 for GNRS). Self-reported thresholds for 'unacceptable pain' by GNRS were higher than by VAT (p<0.001). ROC analyses showed that the highest sensitivity was reached for pain score 2 for both scales. The results suggest that the instruments cannot be used interchangeably without taking their differences into account. Copyright © 2014 Elsevier Ltd and ISBI. All rights reserved.

Designs for Risk Evaluation and Management

DOE Office of Scientific and Technical Information (OSTI.GOV)

The Designs for Risk Evaluation and Management (DREAM) tool was developed as part of the effort to quantify the risk of geologic storage of carbon dioxide (CO 2) under the U.S. Department of Energy's National Risk Assessment Partnership (NRAP). DREAM is an optimization tool created to identify optimal monitoring schemes that minimize the time to first detection of CO 2 leakage from a subsurface storage formation. DREAM acts as a post-processer on user-provided output from subsurface leakage simulations. While DREAM was developed for CO 2 leakage scenarios, it is applicable to any subsurface leakage simulation of the same output format.more » The DREAM tool is comprised of three main components: (1) a Java wizard used to configure and execute the simulations, (2) a visualization tool to view the domain space and optimization results, and (3) a plotting tool used to analyze the results. A secondary Java application is provided to aid users in converting common American Standard Code for Information Interchange (ASCII) output data to the standard DREAM hierarchical data format (HDF5). DREAM employs a simulated annealing approach that searches the solution space by iteratively mutating potential monitoring schemes built of various configurations of monitoring locations and leak detection parameters. This approach has proven to be orders of magnitude faster than an exhaustive search of the entire solution space. The user's manual illustrates the program graphical user interface (GUI), describes the tool inputs, and includes an example application.« less

37 CFR 1.824 - Form and format for nucleotide and/or amino acid sequence submissions in computer readable form.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 37 Patents, Trademarks, and Copyrights 1 2010-07-01 2010-07-01 false Form and format for... And/or Amino Acid Sequences § 1.824 Form and format for nucleotide and/or amino acid sequence... Code for Information Interchange (ASCII) text. No other formats shall be allowed. (3) The computer...

Tracking state deployments of commercial vehicle information systems and networks : 1998 Washington State report

DOT National Transportation Integrated Search

1999-12-01

Volume III of the Logical Architecture contract deliverable documents the Data Dictionary. This formatted version of the Teamwork model data dictionary is mechanically produced from the Teamwork CDIF (Case Data Interchange Format) output file. It is ...

Archive of Digitized Analog Boomer and Minisparker Seismic Reflection Data Collected from the Alabama-Mississippi-Louisiana Shelf During Cruises Onboard the R/V Carancahua and R/V Gyre, April and July, 1981

USGS Publications Warehouse

Sanford, Jordan M.; Harrison, Arnell S.; Wiese, Dana S.; Flocks, James G.

2009-01-01

In April and July of 1981, the U.S. Geological Survey (USGS) conducted geophysical surveys to investigate the shallow geologic framework of the Alabama-Mississippi-Louisiana Shelf in the northern Gulf of Mexico. Work was conducted onboard the Texas A&M University R/V Carancahua and the R/V Gyre to develop a geologic understanding of the study area and to locate potential hazards related to offshore oil and gas production. While the R/V Carancahua only collected boomer data, the R/V Gyre used a 400-Joule minisparker, 3.5-kilohertz (kHz) subbottom profiler, 12-kHz precision depth recorder, and two air guns. The authors selected the minisparker data set because, unlike with the boomer data, it provided the most complete record. This report is part of a series to digitally archive the legacy analog data collected from the Mississippi-Alabama SHelf (MASH). The MASH data rescue project is a cooperative effort by the USGS and the Minerals Management Service (MMS). This report serves as an archive of high-resolution scanned Tagged Image File Format (TIFF) and Graphics Interchange Format (GIF) images of the original boomer and minisparker paper records, navigation files, trackline maps, Geographic Information System (GIS) files, cruise logs, and formal Federal Geographic Data Committee (FGDC) metadata.

The influence of graphic format on breast cancer risk communication.

PubMed

Schapira, Marilyn M; Nattinger, Ann B; McAuliffe, Timothy L

2006-09-01

Graphic displays can enhance quantitative risk communication. However, empiric data regarding the effect of graphic format on risk perception is lacking. We evaluate the effect of graphic format elements on perceptions of risk magnitude and perceived truth of data. Preferences for format also were assessed. Participants (254 female primary care patients) viewed a series of hypothetical risk communications regarding the lifetime risk of breast cancer. Identical numeric risk information was presented using different graphic formats. Risk was perceived to be of lower magnitude when communicated with a bar graph as compared with a pictorial display (p < 0.0001), or with consecutively versus randomly highlighted symbols in a pictorial display (p = 0.0001). Data were perceived to be more true when presented with random versus consecutive highlights in a pictorial display (p < 0.01). A pictorial display was preferred to a bar graph format for the presentation of breast cancer risk estimates alone (p = 0.001). When considering breast cancer risk in comparison to heart disease, stroke, and osteoporosis, however, bar graphs were preferred pictorial displays (p < 0.001). In conclusion, elements of graphic format used to convey quantitative risk information effects key domains of risk perception. One must be cognizant of these effects when designing risk communication strategies.

Presenting self-monitoring test results for consumers: the effects of graphical formats and age.

PubMed

Tao, Da; Yuan, Juan; Qu, Xingda

2018-05-11

To examine the effects of graphical formats and age on consumers' comprehension and perceptions of the use of self-monitoring test results. Participants (36 older and 36 young adults) were required to perform verbatim comprehension and value interpretation tasks with hypothetical self-monitoring test results. The test results were randomly presented by four reference range number lines: basic, color enhanced, color/text enhanced, and personalized information enhanced formats. We measured participants' task performance and eye movement data during task completion, and their perceptions and preference of the graphical formats. The 4 graphical formats yielded comparable task performance, while text/color and personalized information enhanced formats were believed to be easier and more useful in information comprehension, and led to increased confidence in correct comprehension of test results, compared with other formats (all p's < .05). Perceived health risk increased as the formats applied more information cues (p = .008). There were age differences in task performance and visual attention (all p's < .01), while young and older adults had similar perceptions for the 4 formats. Personalized information enhanced format was preferred by both groups. Text/color and personalized information cues appear to be useful for comprehending test results. Future work can be directed to improve the design of graphical formats especially for older adults, and to assess the formats in clinical settings.

Concept Formation and the Development of Language. Theoretical Paper No. 37.

ERIC Educational Resources Information Center

Nelson, Gordon K.

This paper examines possible interchanges between cognitive and language processes with particular attention given to concept formation and semantic language development. Aspects of psychological and contemporary linguistic theories are discussed as a way to interrelate the functions of thought and language. The author concludes that while…

DOE Office of Scientific and Technical Information (OSTI.GOV)

Smith, K.L.

This document has been developed to provide guidance in the interchange of electronic CAD data with Martin Marietta Energy Systems, Inc., Oak Ridge, Tennessee. It is not meant to be as comprehensive as the existing standards and specifications, but to provide a minimum set of practices that will enhance the success of the CAD data exchange. It is now a Department of Energy (DOE) Oak Ridge Field Office requirement that Architect-Engineering (A-E) firms prepare all new drawings using a Computer Aided Design (CAD) system that is compatible with the Facility Manager`s (FM) CAD system. For Oak Ridge facilities, the CADmore » system used for facility design by the FM, Martin Marietta Energy Systems, Inc., is Intregraph. The format for interchange of CAD data for Oak Ridge facilities will be the Intergraph MicroStation/IGDS format.« less

Plan Execution Interchange Language (PLEXIL)

NASA Technical Reports Server (NTRS)

Estlin, Tara; Jonsson, Ari; Pasareanu, Corina; Simmons, Reid; Tso, Kam; Verma, Vandi

2006-01-01

Plan execution is a cornerstone of spacecraft operations, irrespective of whether the plans to be executed are generated on board the spacecraft or on the ground. Plan execution frameworks vary greatly, due to both different capabilities of the execution systems, and relations to associated decision-making frameworks. The latter dependency has made the reuse of execution and planning frameworks more difficult, and has all but precluded information sharing between different execution and decision-making systems. As a step in the direction of addressing some of these issues, a general plan execution language, called the Plan Execution Interchange Language (PLEXIL), is being developed. PLEXIL is capable of expressing concepts used by many high-level automated planners and hence provides an interface to multiple planners. PLEXIL includes a domain description that specifies command types, expansions, constraints, etc., as well as feedback to the higher-level decision-making capabilities. This document describes the grammar and semantics of PLEXIL. It includes a graphical depiction of this grammar and illustrative rover scenarios. It also outlines ongoing work on implementing a universal execution system, based on PLEXIL, using state-of-the-art rover functional interfaces and planners as test cases.

The Integrity of FPGA Designs: Capabilities Enabled by Unlocking Bitstreams and 3rd-Party IP

DTIC Science & Technology

2012-03-01

represented in an HDL such as Verilog or in another common electronic design format such as the Electronic Design Interchange Format ( EDIF ). Whether...Verilog or EDIF , however, the synthesized netlist is expressed as a connected and configured arrangement of the FPGA resources necessary to realize

Telomeres and centromeres have interchangeable roles in promoting meiotic spindle formation

PubMed Central

Fennell, Alex; Fernández-Álvarez, Alfonso; Tomita, Kazunori

2015-01-01

Telomeres and centromeres have traditionally been considered to perform distinct roles. During meiotic prophase, in a conserved chromosomal configuration called the bouquet, telomeres gather to the nuclear membrane (NM), often near centrosomes. We found previously that upon disruption of the fission yeast bouquet, centrosomes failed to insert into the NM at meiosis I and nucleate bipolar spindles. Hence, the trans-NM association of telomeres with centrosomes during prophase is crucial for efficient spindle formation. Nonetheless, in approximately half of bouquet-deficient meiocytes, spindles form properly. Here, we show that bouquet-deficient cells can successfully undergo meiosis using centromere–centrosome contact instead of telomere–centrosome contact to generate spindle formation. Accordingly, forced association between centromeres and centrosomes fully rescued the spindle defects incurred by bouquet disruption. Telomeres and centromeres both stimulate focal accumulation of the SUN domain protein Sad1 beneath the centrosome, suggesting a molecular underpinning for their shared spindle-generating ability. Our observations demonstrate an unanticipated level of interchangeability between the two most prominent chromosomal landmarks. PMID:25688135

Transferable Output ASCII Data (TOAD) gateway: Version 1.0 user's guide

NASA Technical Reports Server (NTRS)

Bingel, Bradford D.

1991-01-01

The Transferable Output ASCII Data (TOAD) Gateway, release 1.0 is described. This is a software tool for converting tabular data from one format into another via the TOAD format. This initial release of the Gateway allows free data interchange among the following file formats: TOAD; Standard Interface File (SIF); Program to Optimize Simulated Trajectories (POST) input; Comma Separated Value (TSV); and a general free-form file format. As required, additional formats can be accommodated quickly and easily.

Assessing Probabilistic Reasoning in Verbal-Numerical and Graphical-Pictorial Formats: An Evaluation of the Psychometric Properties of an Instrument

ERIC Educational Resources Information Center

Agus, Mirian; Penna, Maria Pietronilla; Peró-Cebollero, Maribel; Guàrdia-Olmos, Joan

2016-01-01

Research on the graphical facilitation of probabilistic reasoning has been characterised by the effort expended to identify valid assessment tools. The authors developed an assessment instrument to compare reasoning performances when problems were presented in verbal-numerical and graphical-pictorial formats. A sample of undergraduate psychology…

SVG-Based Web Publishing

NASA Astrophysics Data System (ADS)

Gao, Jerry Z.; Zhu, Eugene; Shim, Simon

2003-01-01

With the increasing applications of the Web in e-commerce, advertising, and publication, new technologies are needed to improve Web graphics technology due to the current limitation of technology. The SVG (Scalable Vector Graphics) technology is a new revolutionary solution to overcome the existing problems in the current web technology. It provides precise and high-resolution web graphics using plain text format commands. It sets a new standard for web graphic format to allow us to present complicated graphics with rich test fonts and colors, high printing quality, and dynamic layout capabilities. This paper provides a tutorial overview about SVG technology and its essential features, capability, and advantages. The reports a comparison studies between SVG and other web graphics technologies.

36 CFR 1235.4 - What publications are incorporated by reference in this part?

Code of Federal Regulations, 2011 CFR

2011-07-01

...-track magnetic tape cartridges—DLT 5 format, First Edition, December 15, 1999, IBR approved for § 1235...-track magnetic tape cartridges—DLT 6 format, First Edition, May 15, 2000, IBR approved for § 1235.46. (d... Magnetic Tape for Information Interchange (1600 CPI, PE), 1986, IBR approved for § 1235.46. (2) [Reserved...

Platform-independent method for computer aided schematic drawings

DOEpatents

Vell, Jeffrey L [Slingerlands, NY; Siganporia, Darius M [Clifton Park, NY; Levy, Arthur J [Fort Lauderdale, FL

2012-02-14

A CAD/CAM method is disclosed for a computer system to capture and interchange schematic drawing and associated design information. The schematic drawing and design information are stored in an extensible, platform-independent format.

Design considerations of CareWindows, a Windows 3.0-based graphical front end to a Medical Information Management System using a pass-through-requester architecture.

PubMed Central

Ward, R. E.; Purves, T.; Feldman, M.; Schiffman, R. M.; Barry, S.; Christner, M.; Kipa, G.; McCarthy, B. D.; Stiphout, R.

1991-01-01

The Care Windows development project demonstrated the feasibility of an approach designed to add the benefits of an event-driven, graphically-oriented user interface to an existing Medical Information Management System (MIMS) without overstepping economic and logistic constraints. The design solution selected for the Care Windows project incorporates three important design features: (1) the effective de-coupling of severs from requesters, permitting the use of an extensive pre-existing library of MIMS servers, (2) the off-loading of program control functions of the requesters to the workstation processor, reducing the load per transaction on central resources and permitting the use of object-oriented development environments available for microcomputers, (3) the selection of a low end, GUI-capable workstation consisting of a PC-compatible personal computer running Microsoft Windows 3.0, and (4) the development of a highly layered, modular workstation application, permitting the development of interchangeable modules to insure portability and adaptability. PMID:1807665

Comparing Psychology Undergraduates' Performance in Probabilistic Reasoning under Verbal-Numerical and Graphical-Pictorial Problem Presentation Format: What Is the Role of Individual and Contextual Dimensions?

ERIC Educational Resources Information Center

Agus, Mirian; Peró-Cebollero, Maribel; Penna, Maria Pietronilla; Guàrdia-Olmos, Joan

2015-01-01

This study aims to investigate about the existence of a graphical facilitation effect on probabilistic reasoning. Measures of undergraduates' performances on problems presented in both verbal-numerical and graphical-pictorial formats have been related to visuo-spatial and numerical prerequisites, to statistical anxiety, to attitudes towards…

A prototype molecular interactive collaborative environment (MICE).

PubMed

Bourne, P; Gribskov, M; Johnson, G; Moreland, J; Wavra, S; Weissig, H

1998-01-01

Illustrations of macromolecular structure in the scientific literature contain a high level of semantic content through which the authors convey, among other features, the biological function of that macromolecule. We refer to these illustrations as molecular scenes. Such scenes, if available electronically, are not readily accessible for further interactive interrogation. The basic PDB format does not retain features of the scene; formats like PostScript retain the scene but are not interactive; and the many formats used by individual graphics programs, while capable of reproducing the scene, are neither interchangeable nor can they be stored in a database and queried for features of the scene. MICE defines a Molecular Scene Description Language (MSDL) which allows scenes to be stored in a relational database (a molecular scene gallery) and queried. Scenes retrieved from the gallery are rendered in Virtual Reality Modeling Language (VRML) and currently displayed in WebView, a VRML browser modified to support the Virtual Reality Behavior System (VRBS) protocol. VRBS provides communication between multiple client browsers, each capable of manipulating the scene. This level of collaboration works well over standard Internet connections and holds promise for collaborative research at a distance and distance learning. Further, via VRBS, the VRML world can be used as a visual cue to trigger an application such as a remote MEME search. MICE is very much work in progress. Current work seeks to replace WebView with Netscape, Cosmoplayer, a standard VRML plug-in, and a Java-based console. The console consists of a generic kernel suitable for multiple collaborative applications and additional application-specific controls. Further details of the MICE project are available at http:/(/)mice.sdsc.edu.

Development of geotechnical data schema in transportation : final report.

DOT National Transportation Integrated Search

2012-12-01

The objective of "Development of Geotechnical Data Schema in Transportation" is to develop an : international standard interchange format for geotechnical data. This standard will include a data : dictionary and XML schema which are GML compliant. Th...

CruiseViewer: SIOExplorer Graphical Interface to Metadata and Archives.

NASA Astrophysics Data System (ADS)

Sutton, D. W.; Helly, J. J.; Miller, S. P.; Chase, A.; Clark, D.

2002-12-01

We are introducing "CruiseViewer" as a prototype graphical interface for the SIOExplorer digital library project, part of the overall NSF National Science Digital Library (NSDL) effort. When complete, CruiseViewer will provide access to nearly 800 cruises, as well as 100 years of documents and images from the archives of the Scripps Institution of Oceanography (SIO). The project emphasizes data object accessibility, a rich metadata format, efficient uploading methods and interoperability with other digital libraries. The primary function of CruiseViewer is to provide a human interface to the metadata database and to storage systems filled with archival data. The system schema is based on the concept of an "arbitrary digital object" (ADO). Arbitrary in that if the object can be stored on a computer system then SIOExplore can manage it. Common examples are a multibeam swath bathymetry file, a .pdf cruise report, or a tar file containing all the processing scripts used on a cruise. We require a metadata file for every ADO in an ascii "metadata interchange format" (MIF), which has proven to be highly useful for operability and extensibility. Bulk ADO storage is managed using the Storage Resource Broker, SRB, data handling middleware developed at the San Diego Supercomputer Center that centralizes management and access to distributed storage devices. MIF metadata are harvested from several sources and housed in a relational (Oracle) database. For CruiseViewer, cgi scripts resident on an Apache server are the primary communication and service request handling tools. Along with the CruiseViewer java application, users can query, access and download objects via a separate method that operates through standard web browsers, http://sioexplorer.ucsd.edu. Both provide the functionability to query and view object metadata, and select and download ADOs. For the CruiseViewer application Java 2D is used to add a geo-referencing feature that allows users to select basemap images and have vector shapes representing query results mapped over the basemap in the image panel. The two methods together address a wide range of user access needs and will allow for widespread use of SIOExplorer.

E-TIF: An Electronic Terminology Interchange Format.

ERIC Educational Resources Information Center

Melby, Alan

1995-01-01

Emphasizes the importance of terminology in an age of machine-based translation systems. Discusses differences between lexicography and terminology. Concludes with an argument for a new system based on the Text Encoding Initiative-based notions of elements and attributes. (CFR)

Surface and deep structures in graphics comprehension.

PubMed

Schnotz, Wolfgang; Baadte, Christiane

2015-05-01

Comprehension of graphics can be considered as a process of schema-mediated structure mapping from external graphics on internal mental models. Two experiments were conducted to test the hypothesis that graphics possess a perceptible surface structure as well as a semantic deep structure both of which affect mental model construction. The same content was presented to different groups of learners by graphics from different perspectives with different surface structures but the same deep structure. Deep structures were complementary: major features of the learning content in one experiment became minor features in the other experiment, and vice versa. Text was held constant. Participants were asked to read, understand, and memorize the learning material. Furthermore, they were either instructed to process the material from the perspective supported by the graphic or from an alternative perspective, or they received no further instruction. After learning, they were asked to recall the learning content from different perspectives by completing graphs of different formats as accurately as possible. Learners' recall was more accurate if the format of recall was the same as the learning format which indicates surface structure influences. However, participants also showed more accurate recall when they remembered the content from a perspective emphasizing the deep structure, regardless of the graphics format presented before. This included better recall of what they had not seen than of what they really had seen before. That is, deep structure effects overrode surface effects. Depending on context conditions, stimulation of additional cognitive processing by instruction had partially positive and partially negative effects.

Monte Carlo Particle Lists: MCPL

NASA Astrophysics Data System (ADS)

Kittelmann, T.; Klinkby, E.; Knudsen, E. B.; Willendrup, P.; Cai, X. X.; Kanaki, K.

2017-09-01

A binary format with lists of particle state information, for interchanging particles between various Monte Carlo simulation applications, is presented. Portable C code for file manipulation is made available to the scientific community, along with converters and plugins for several popular simulation packages.

Interchange reaction of disulfides and denaturation of oxytocin by copper(II)/ascorbic acid/O2 system.

PubMed

Inoue, H; Hirobe, M

1987-05-29

The interchange reaction of disulfides was caused by the copper(II)/ascorbic acid/O2 system. The incubation of two symmetric disulfides, L-cystinyl-bis-L-phenylalanine (PP) and L-cystinyl-bis-L-tyrosine (TT), with L-ascorbic acid and CuSO4 in potassium phosphate buffer (pH 7.2, 50 mM) resulted in the formation of an asymmetric disulfide, L-cystinyl-L-phenylalanine-L-tyrosine (PT), and the final ratio of PP:PT:TT was 1:2:1. As the reaction was inhibited by catalase and DMSO only at the initial time, hydroxyl radical generated by the copper(II)/ascorbic acid/O2 system seemed to be responsible for the initiation of the reaction. Oxytocin and insulin were denatured by this system, and catalase and DMSO similarly inhibited these denaturations. As the composition of amino acids was unchanged after the reaction, hydroxyl radical was thought to cause the cleavage and/or interchange reaction of disulfides to denature the peptides.

Differential drift of plasma clouds in the magnetosphere: an update

NASA Astrophysics Data System (ADS)

Lemaire, J. F.

2001-07-01

First, Brice's (Journal of Geophysical Research 72 (1967) 5193) original theory for the formation of the plasmapause is recalled. Next, the motivation for writing a modification to this early theory is pointed out. The key aspects of Brice's manuscript are outlined and discussed. The mechanism of interchange driven by gravitational forces, centrifugal effects and kinetic pressure is considered in the cases when the integrated Pedersen conductivity is (i) negligibly small (as in Chandrasekhar's, Plasma Physics, University of Chicago Press, Chicago, 1960, 217 pp. and Longmire's, Elementary Plasma Physics, Wiley Interscience, New York, 1963, 296 pp., textbooks), (ii) infinitely large (as in many magnetospheric convection models), or (iii) has a finite value of the order of 0.2 mho, as in the Earth's ionosphere. Updates of this theory of interchange resulting from the existence of weak double layers, from quasi-interchange, or from the effects of an additional population of energetic ring-current particles forming the extended tail of the velocity distribution function, have also been reexamined.

Writing from behind the Fence: Incarcerated Youths and a Graphic Novel on HIV/AIDS

ERIC Educational Resources Information Center

Gavigan, Karen; Albright, Kendra

2015-01-01

Graphic novels are an increasingly popular format that educators can use as a tool to teach reading and writing skills across the K-12 curriculum. This article describes a project in which incarcerated youths collaborated with a graphic illustrator to create a graphic novel about teens dealing with issues related to HIV/AIDS. The graphic novel is…

48 CFR 832.7002-1 - Data transmission.

Code of Federal Regulations, 2013 CFR

2013-10-01

... 48 Federal Acquisition Regulations System 5 2013-10-01 2013-10-01 false Data transmission. 832... CONTRACTING REQUIREMENTS CONTRACT FINANCING Electronic Invoicing Requirements 832.7002-1 Data transmission... conforms to the X12 electronic data interchange (EDI) formats established by the Accredited Standards...

48 CFR 832.7002-1 - Data transmission.

Code of Federal Regulations, 2014 CFR

2014-10-01

... 48 Federal Acquisition Regulations System 5 2014-10-01 2014-10-01 false Data transmission. 832... CONTRACTING REQUIREMENTS CONTRACT FINANCING Electronic Invoicing Requirements 832.7002-1 Data transmission... conforms to the X12 electronic data interchange (EDI) formats established by the Accredited Standards...

Amazonian magnetostratigraphy: Dating the first pulse of the Great American Faunal Interchange

NASA Astrophysics Data System (ADS)

Campbell, Kenneth E., Jr.; Prothero, Donald R.; Romero-Pittman, Lidia; Hertel, Fritz; Rivera, Nadia

2010-04-01

The chronostratigraphy of the youngest Neogene deposits of the Amazon Basin, which comprise the Madre de Dios Formation in eastern Peru, remains unresolved. Although 40Ar/ 39Ar dates on two volcanic ashes from this formation in Peru provide critical baseline data points, stratigraphic correlations among scattered riverine outcrops in adjacent drainage basins remain problematic. To refine the chronostratigraphy of the Madre de Dios Formation, we report here the magnetostratigraphy of an outcrop on the Madre de Dios River in southeastern Peru. A total of 18 polarity zones was obtained in the ˜65-m-thick Cerro Colorado section, which we correlate to magnetozones Chrons C4Ar to C2An (9.5-3.0 Ma) based on the prior 40Ar/ 39Ar dates. These results confirm the late Miocene age of a gomphothere recovered from the Ipururo Formation, which underlies the late Miocene Ucayali Unconformity at the base of the Cerro Colorado outcrop. The results also support earlier interpretations of a late Miocene age for other fossils of North American mammals recovered from basal conglomeratic deposits of the Madre de Dios Formation immediately above the Ucayali Unconformity. These mammals include other gomphotheres, peccaries, and tapirs, and their presence in South America in the late Miocene is recognized as part of the first pulse of the Great American Faunal Interchange.

Use of data description languages in the interchange of data

NASA Technical Reports Server (NTRS)

Pignede, M.; Real-Planells, B.; Smith, S. R.

1994-01-01

The Consultative Committee for Space Data Systems (CCSDS) is developing Standards for the interchange of information between systems, including those operating under different environments. The objective is to perform the interchange automatically, i.e. in a computer interpretable manner. One aspect of the concept developed by CCSDS is the use of a separate data description to specify the data being transferred. Using the description, data can then be automatically parsed by the receiving computer. With a suitably expressive Data Description Language (DDL), data formats of arbitrary complexity can be handled. The advantages of this approach are: (1) that the description need only be written and distributed once to all users, and (2) new software does not need to be written for each new format, provided generic tools are available to support writing and interpretation of descriptions and the associated data instances. Consequently, the effort of 'hard coding' each new format is avoided and problems of integrating multiple implementations of a given format by different users are avoided. The approach is applicable in any context where computer parsable description of data could enhance efficiency (e.g. within a spacecraft control system, a data delivery system or an archive). The CCSDS have identified several candidate DDL's: EAST (Extended Ada Subset), TSDN (Transfer Syntax Data Notation) and MADEL (Modified ASN.1 as a Data Description Language -- a DDL based on the Abstract Syntax Notation One - ASN.1 - specified in the ISO/IEC 8824). This paper concentrates on ESA's development of MADEL. ESA have also developed a 'proof of concept' prototype of the required support tools, implemented on a PC under MS-DOS, which has successfully demonstrated the feasibility of the approach, including the capability within an application of retrieving and displaying particular data elements, given its MADEL description (i.e. a data description written in MADEL). This paper outlines the work done to date and assesses the applicability of this modified ASN.1 as a DDL. The feasibility of the approach is illustrated with several examples.

A proposal for the measurement of graphical statistics effectiveness: Does it enhance or interfere with statistical reasoning?

NASA Astrophysics Data System (ADS)

Agus, M.; Penna, M. P.; Peró-Cebollero, M.; Guàrdia-Olmos, J.

2015-02-01

Numerous studies have examined students' difficulties in understanding some notions related to statistical problems. Some authors observed that the presentation of distinct visual representations could increase statistical reasoning, supporting the principle of graphical facilitation. But other researchers disagree with this viewpoint, emphasising the impediments related to the use of illustrations that could overcharge the cognitive system with insignificant data. In this work we aim at comparing the probabilistic statistical reasoning regarding two different formats of problem presentations: graphical and verbal-numerical. We have conceived and presented five pairs of homologous simple problems in the verbal numerical and graphical format to 311 undergraduate Psychology students (n=156 in Italy and n=155 in Spain) without statistical expertise. The purpose of our work was to evaluate the effect of graphical facilitation in probabilistic statistical reasoning. Every undergraduate has solved each pair of problems in two formats in different problem presentation orders and sequences. Data analyses have highlighted that the effect of graphical facilitation is infrequent in psychology undergraduates. This effect is related to many factors (as knowledge, abilities, attitudes, and anxiety); moreover it might be considered the resultant of interaction between individual and task characteristics.

Computer Series, 61: Bits & Pieces, 24.

ERIC Educational Resources Information Center

Moore, John W., Ed.

1985-01-01

Describes: (1) laboratory information science in the clinical chemistry curriculum; (2) testing Boyle's Law, a context for statistical methods in undergraduate laboratories; (3) acquiring chemical concepts using microcomputers as tutees; and (4) using Data Interchange Format files for Apple microcomputers. Includes feedback from a previous article…

Defining and Measuring Transnational Social Structures

ERIC Educational Resources Information Center

Molina, José Luis; Petermann, Sören; Herz, Andreas

2015-01-01

Transnational social fields and transnational social spaces are often used interchangeably to describe and analyze emergent structures of cross-border formations. In this article, we suggest measuring two key aspects of these social structures: embeddedness and span of migrants' personal networks. While clustered graphs allow assessing…

User's Guide for Flight Simulation Data Visualization Workstation

NASA Technical Reports Server (NTRS)

Kaplan, Joseph A.; Chen, Ronnie; Kenney, Patrick S.; Koval, Christopher M.; Hutchinson, Brian K.

1996-01-01

Today's modern flight simulation research produces vast amounts of time sensitive data. The meaning of this data can be difficult to assess while in its raw format. Therefore, a method of breaking the data down and presenting it to the user in a graphical format is necessary. Simulation Graphics (SimGraph) is intended as a data visualization software package that will incorporate simulation data into a variety of animated graphical displays for easy interpretation by the simulation researcher. This document is intended as an end user's guide.

The GuideLine Interchange Format

PubMed Central

Ohno-Machado, Lucila; Gennari, John H.; Murphy, Shawn N.; Jain, Nilesh L.; Tu, Samson W.; Oliver, Diane E.; Pattison-Gordon, Edward; Greenes, Robert A.; Shortliffe, Edward H.; Barnett, G. Octo

1998-01-01

Objective: To allow exchange of clinical practice guidelines among institutions and computer-based applications. Design: The GuideLine Interchange Format (GLIF) specification consists of the GLIF model and the GLIF syntax. The GLIF model is an object-oriented representation that consists of a set of classes for guideline entities, attributes for those classes, and data types for the attribute values. The GLIF syntax specifies the format of the test file that contains the encoding. Methods: Researchers from the InterMed Collaboratory at Columbia University, Harvard University (Brigham and Women's Hospital and Massachusetts General Hospital), and Stanford University analyzed four existing guideline systems to derive a set of requirements for guideline representation. The GLIF specification is a consensus representation developed through a brainstorming process. Four clinical guidelines were encoded in GLIF to assess its expressivity and to study the variability that occurs when two people from different sites encode the same guideline. Results: The encoders reported that GLIF was adequately expressive. A comparison of the encodings revealed substantial variability. Conclusion: GLIF was sufficient to model the guidelines for the four conditions that were examined. GLIF needs improvement in standard representation of medical concepts, criterion logic, temporal information, and uncertainty. PMID:9670133

Graphic Novels in Your School Library

ERIC Educational Resources Information Center

Karp, Jesse

2011-01-01

Many educators now agree that graphic novels inform as well as entertain, and to dismiss the educational potential of the graphic novel is to throw away a golden opportunity to reach out to young readers. This dynamic book takes a look at the term "graphic novel," how the format has become entwined in our culture, and the ways in which graphic…

Patients were more consistent in randomized trial at prioritizing childbirth preferences using graphic-numeric than verbal formats.

PubMed

Eden, Karen B; Dolan, James G; Perrin, Nancy A; Kocaoglu, Dundar; Anderson, Nicholas; Case, James; Guise, Jeanne-Marie

2009-04-01

We developed an evidence-based decision aid to help women with a prior cesarean to prioritize their childbirth preferences related to a future birth. Because there was uncertainty about which scale format would assist the patients in being most consistent in prioritizing preferences in a multiattribute decision model, we compared a graphic-numeric scale with a text-anchored scale. Ninety-six postnatal women with a prior cesarean were randomized to use 1 of 2 preference scale formats in a computerized childbirth decision aid. We measured the level of inconsistency (intransitivity) when patients prioritized their childbirth preferences and clarity of values before and after using the decision aid. When the trade-offs involved risk, women were more consistent when using graphic-numeric than text-anchored formats (P=0.015). They prioritized safety to their baby as 4 times more important than any other decision factor including safety to self. Both groups reduced unclear childbirth values over time (P<0.001). Women who over-used the extreme ends of the scale when evaluating risk were more likely to be inconsistent (P<0.001). Patients were more consistent in making trade-offs involving risk using graphic-numeric formats than text-anchored formats to measure patient preferences.

Final-Approach Spacing Aids (FASA) evaluation for terminal-area, time-based air traffic control

NASA Technical Reports Server (NTRS)

Credeur, Leonard; Capron, William R.; Lohr, Gary W.; Crawford, Daniel J.; Tang, Dershuen A.; Rodgers, William G., Jr.

1993-01-01

A jointly funded (NASA/FAA) real-time simulation study was conducted at NASA Langley Research Center to gather comparative performance data among three candidate final-approach spacing aid (FASA) display formats. Several objective measures of controller performance and their display eye-scan behavior as well as subjective workload and rating questionnaires were used. For each of two representative pattern-speed procedures (a 170-knot procedure and a 210-knot procedure with speed control aiding), data were gathered, via twelve FAA controllers, using four final-controller display format conditions (manual/ARTS 3, graphic marker, DICE countdown, and centerline slot marker). Measured runway separations were more precise with both the graphic marker and DICE countdown formats than with the centerline slot marker and both (graphic and DICE) improved precision relative to the manual/ARTS 3 format. For three separate rating criteria, the subject controllers ranked the FASA formats in the same order: graphic marker, DICE countdown, and centerline slot marker. The increased precision measured with the 210-knot pattern-speed procedure may indicate the potential for the application of speed-control aiding where higher pattern speeds are practical after the base-to-final turn. Also presented are key FASA issues, a rationale for the formats selected for testing, and their description.

Vector Topographic Map Data over the BOREAS NSA and SSA in SIF Format

NASA Technical Reports Server (NTRS)

Knapp, David; Nickeson, Jaime; Hall, Forrest G. (Editor)

2000-01-01

This data set contains vector contours and other features of individual topographic map sheets from the National Topographic Series (NTS). The map sheet files were received in Standard Interchange Format (SIF) and cover the BOReal Ecosystem-Atmosphere Study (BOREAS) Northern Study Area (NSA) and Southern Study Area (SSA) at scales of 1:50,000 and 1:250,000. The individual files are stored in compressed Unix tar archives.

Properties of Artificial Gaseous Mixtures for their Safe Use and Support the Natural Gas Supply Networks / Własności Sztucznych Mieszanin Gazowych do Bezpiecznego ich Użytkowania i Wspomagania Zasilania Sieci Gazu Ziemnego

NASA Astrophysics Data System (ADS)

Łaciak, Mariusz

2012-11-01

The increase in natural gas consumption by the general public and industry development, in particular the petrochemical and chemical industries, has made increasing the world interest in using gas replacement for natural gas, both as mixtures of flammable gases and gas mixtures as LPG with air (SNG - Synthetic Natural Gas). Economic analysis in many cases prove that to ensure interchangeability of gas would cost less than the increase in pipeline capacity to deliver the same quantity of natural gas. In addition, SNG systems and installations, could be considered as investments to improve security and flexibility of gas supply. Known existing methods for determining the interchangeability of gases in gas gear based on Wobbe index, which determines the heat input and the burning rate tide, which in turn is related to flame stability. Exceeding the Wobbe index of a value increases the amount of carbon monoxide in the exhaust than the permissible concentration. Methods of determining the interchangeability of gases is characterized by a gas in relation to the above-described phenomena by means of quantitative indicators, or using diagrams interchangeability, where the gas is characterized by the position of a point in a coordinate system. The best known method for determining the interchangeability of gases is Delbourg method, in which the gas is characterized by the revised (expanded) Wobbe Index (Wr), the combustion potential, rate of soot formation (Ic) and the ratio of the formation of yellow ends (I). Universal way to determine the interchangeability of gas is also Weaver accounting method. It does not require determination of the reference gas. It is designed for utensils for household gas and gas pressure p = 1.25 kPa. The criteria and definition of gas interchangeability volatility in practice to the combustion in a gas gear. In the case of gas exchange in industrial furnaces, interchangeability criteria are usually not very useful because of other conditions of combustion and heat exchange. In industrial reheating furnace gas is combusted in a sealed combustion chambers. Air supply is regulated. The exhaust gases are discharged into canals and the chimney to the atmosphere. The temperature difference between load (fuel gas) and the flame is much less than in the case of gas household appliances. In the furnace heat exchange takes place mainly by radiation in 85% to 95%. The value of heat flux flowing from the gas to a heated charge is not proportional to the heat load burners. Interchangeability of gas is linked by adding to natural gas, a certain amount of gas that is a substitute for natural gas in meeting the criteria for substitution in order to ensure certainty of supply of natural gas to customers. Gases that can be used in the processes of blending and used as replacement gases are mainly a mixture of propane and propane - butane (LPG - Liquid Petroleum Gas), landfill gas or biogas (LFG - Landfill Gas) and dimethyl ether (DME). One of the more well-known gas mixtures used in many countries around the world to compensate for peak demands is a mixture containing about 75% of natural gas and approximately 25% propane / air (LPG / air). Also in Poland is prepared to amend the provisions in this regard (at this moment - oxygen in the gas network can not exceed 0.2%). In this paper, the calculations of interchangeability of gas mixtures LFG - LPG and LPG - air (SNG) for natural gas was made. It was determined whether the analyzed mixtures have similar stable flame zones regardless of the quality of LFG fuel and whether they may in whole or in part replace CH4, without any modification of equipment suction air for combustion. The obtained results will determine whether the fuel can be used as a replacement for natural gas used in such household appliances and, possibly, industrial burners. In connection with the possibility of changes in the quality of LFG, depending on such factors as storage time, as pre-treatment, will be determined the degree of interchangeability of LFG as a fuel mixed with regard to its quality.

These Aren't Your Father's Funny Papers: The New World of Digital Graphic Novels

ERIC Educational Resources Information Center

Moorefield-Lang, Heather; Gavigan, Karen

2012-01-01

Due to the development of new 21st-century technologies, the world of children's and young adult literature is continually changing. For example, one of the fastest-growing multimodal formats that today's visually literate youth embrace is the digital graphic novel. Digital graphic novels are graphic novels produced on and/or accessed on some form…

Law and Technology: Can They Keep Abreast?

ERIC Educational Resources Information Center

Weiss, Peter N.

1991-01-01

Electronic data interchange (EDI) permits two parties to enter into a contract without the use of paper and human signatures, which are historically associated with commerce in goods and services. As federal legislation governing contractual information changes to accommodate electronic formats, provisions must be crafted in a technology-neutral…

32 CFR Appendix D to Part 169a - Commercial Activities Management Information System (CAMIS)

Code of Federal Regulations, 2010 CFR

2010-07-01

... 32 National Defense 1 2010-07-01 2010-07-01 false Commercial Activities Management Information... to Part 169a—Commercial Activities Management Information System (CAMIS) Each DoD Component shall... American Standard Code Information Interchange text file format on a MicroSoft-Disk Operating System...

May We Help You Find Something? AskNSDL!

ERIC Educational Resources Information Center

Silverstein, Joanne

2003-01-01

Explains the digital reference service AskNSDL that was developed for the National Science Digital Library (NSDL). Discusses tools used to design the service, including QABuilder software; QuIP (Question Interchange Profile) metadata format standard; GEM (Gateway to Educational Materials) cataloging tool; and the AskERIC question and answer…

ALES: An Innovative Argument-Learning Environment

ERIC Educational Resources Information Center

Abbas, Safia; Sawamura, Hajime

2010-01-01

This paper presents the development of an Argument-Learning System (ALES). The idea is based on the AIF (argumentation interchange format) ontology using "Walton theory". ALES uses different mining techniques to manage a highly structured arguments repository. This repository was designed, developed and implemented by the authors. The aim is to…

Multiprocessor graphics computation and display using transputers

NASA Technical Reports Server (NTRS)

Ellis, Graham K.

1988-01-01

A package of two-dimensional graphics routines was developed to run on a transputer-based parallel processing system. These routines were designed to enable applications programmers to easily generate and display results from the transputer network in a graphic format. The graphics procedures were designed for the lowest possible network communication overhead for increased performance. The routines were designed for ease of use and to present an intuitive approach to generating graphics on the transputer parallel processing system.

GuideLine Interchange Format (GLIP): Extensions and Practical Applications

DTIC Science & Technology

2000-09-01

Others have also studied and used GLIF as well6-9 . We chose this formalism because it can be easily (and exactly) represented in a flowchart , a...benefit from guidelines in different formats (algorithms, flowcharts , written text). Guidelines in diagrammatic form such as algorithms are useful for...as long as a task is performed, the GL suggests the next steps. This can be a suitable modality for beginners . On the contrary, it can be "silent

Social Structure Simulation and Inference Using Artificial Intelligence Techniques

DTIC Science & Technology

2005-06-15

Batagelj and Mrvar , 2003] comes closest to defining a universal interchange format for social network data. PAJEK .net format is defined using a...ObjectStyle, 2005] and in future version of PAJEK[ Batagelj and Mrvar , 2003] GXL[Holt, Winter, and Schürr, 2000][Taentzer, 2001][Winter, 2001] was...Barabási and R. Albert. Emergence of scaling in random networks. Science, 286(5439):509–512, Oct 1999. V. Batagelj and A. Mrvar . Pajek - analysis and

Mass data graphics requirements for symbol generators: example 2D airport navagation and 3D terrain function

NASA Astrophysics Data System (ADS)

Schiefele, Jens; Bader, Joachim; Kastner, S.; Wiesemann, Thorsten; von Viebahn, Harro

2002-07-01

Next generation of cockpit display systems will display mass data. Mass data includes terrain, obstacle, and airport databases. Display formats will be two and eventually 3D. A prerequisite for the introduction of these new functions is the availability of certified graphics hardware. The paper describes functionality and required features of an aviation certified 2D/3D graphics board. This graphics board should be based on low-level and hi-level API calls. These graphic calls should be very similar to OpenGL. All software and the API must be aviation certified. As an example application, a 2D airport navigation function and a 3D terrain visualization is presented. The airport navigation format is based on highly precise airport database following EUROCAE ED-99/RTCA DO-272 specifications. Terrain resolution is based on EUROCAE ED-98/RTCA DO-276 requirements.

Interaction devices for hands-on desktop design

NASA Astrophysics Data System (ADS)

Ju, Wendy; Madsen, Sally; Fiene, Jonathan; Bolas, Mark T.; McDowall, Ian E.; Faste, Rolf

2003-05-01

Starting with a list of typical hand actions - such as touching or twisting - a collection of physical input device prototypes was created to study better ways of engaging the body and mind in the computer aided design process. These devices were interchangeably coupled with a graphics system to allow for rapid exploration of the interplay between the designer's intent, body motions, and the resulting on-screen design. User testing showed that a number of key considerations should influence the future development of such devices: coupling between the physical and virtual worlds, tactile feedback, and scale. It is hoped that these explorations contribute to the greater goal of creating user interface devices that increase the fluency, productivity and joy of computer-augmented design.

Automated System Market Place 1993. Part 2: Focus on Microcomputers.

ERIC Educational Resources Information Center

Bridge, Frank R.

1993-01-01

Presents 1992 sales of microcomputer systems by vendor. Customer support services, a new interchange format for MARC records, vendor market share and other statistics, foreign sales, and large and small systems are discussed. Profiles of 14 vendors, a chart of compatible system interfaces by vendor, and a directory of microcomputers sources are…

48 CFR 53.105 - Computer generation.

Code of Federal Regulations, 2013 CFR

2013-10-01

... Data Interchange or a format that can be translated into one of those standards. (b) The standards listed in paragraph (a)(2) of this section may also be used for submission of data set forth in other..., content, or sequence of the data elements, and the form carries the Standard or Optional Form number and...

48 CFR 53.105 - Computer generation.

Code of Federal Regulations, 2012 CFR

2012-10-01

... Data Interchange or a format that can be translated into one of those standards. (b) The standards listed in paragraph (a)(2) of this section may also be used for submission of data set forth in other..., content, or sequence of the data elements, and the form carries the Standard or Optional Form number and...

48 CFR 53.105 - Computer generation.

Code of Federal Regulations, 2014 CFR

2014-10-01

... Data Interchange or a format that can be translated into one of those standards. (b) The standards listed in paragraph (a)(2) of this section may also be used for submission of data set forth in other..., content, or sequence of the data elements, and the form carries the Standard or Optional Form number and...

Mitomycin C-induced pairing of heterochromatin reflects initiation of DNA repair and chromatid exchange formation.

PubMed

Abdel-Halim, H I; Natarajan, A T; Mullenders, L H F; Boei, J J W A

2005-04-15

Chromatid interchanges induced by the DNA cross-linking agent mitomycin C (MMC) are over-represented in human chromosomes containing large heterochromatic regions. We found that nearly all exchange breakpoints of chromosome 9 are located within the paracentromeric heterochromatin and over 70% of exchanges involving chromosome 9 are between its homologues. We provide evidence that the required pairing of chromosome 9 heterochromatic regions occurs in G(0)/G(1) and S-phase cells as a result of an active cellular process initiated upon MMC treatment. By contrast, no pairing was observed for a euchromatic paracentromeric region of the equal-sized chromosome 8. The MMC-induced pairing of chromosome 9 heterochromatin is observed in a subset of cells; its percentage closely mimics the frequency of homologous interchanges found at metaphase. Moreover, the absence of pairing in cells derived from XPF patients correlates with an altered spectrum of MMC-induced exchanges. Together, the data suggest that the heterochromatin-specific pairing following MMC treatment reflects the initiation of DNA cross-link repair and the formation of exchanges.

DoD Electronic Data Interchange (EDI) Convention: ASC X12 Transaction Set 859 Generic Freight Invoice (Version 003020)

DTIC Science & Technology

1993-04-01

FREIGHT INVOICE (VERSION 003020) FORMATTING INVOICE INFORMATION FOR THE DoD TRANSPORTATION PAYMENT SYSTEM USING THE X1 2.55 TRANSACTION SET 859 GENERIC...GBYERIC FREIGHT NIVOICE EDI CONVENTON 859.003020 * Contents FORMATTING INVOICE INFORMATION FOR THE DoD TRANSPORTATION PAYMENT SYSTEM USING THE Xl 2.55... transportation invoice using the ASC X12.55 Transaction Set 859 Generic Freight Invoice (003020). It contains information for the design of interface

Critique and Process: Signature Pedagogies in the Graphic Design Classroom

ERIC Educational Resources Information Center

Motley, Phillip

2017-01-01

Like many disciplines in design and the visual fine arts, critique is a signature pedagogy in the graphic design classroom. It serves as both a formative and summative assessment while also giving students the opportunity to practice the habits of graphic design. Critiques help students become keen observers of relevant disciplinary criteria;…

Developing Web Services for Technology Education. The Graphic Communication Electronic Publishing Project.

ERIC Educational Resources Information Center

Sanders, Mark

1999-01-01

Graphic Communication Electronic Publishing Project supports a Web site (http://TechEd.vt.edu/gcc/) for graphic communication teachers and students, providing links to Web materials, conversion of print materials to electronic formats, and electronic products and services including job listings, resume posting service, and a listserv. (SK)

Gene Graphics: a genomic neighborhood data visualization web application.

PubMed

Harrison, Katherine J; Crécy-Lagard, Valérie de; Zallot, Rémi

2018-04-15

The examination of gene neighborhood is an integral part of comparative genomics but no tools to produce publication quality graphics of gene clusters are available. Gene Graphics is a straightforward web application for creating such visuals. Supported inputs include National Center for Biotechnology Information gene and protein identifiers with automatic fetching of neighboring information, GenBank files and data extracted from the SEED database. Gene representations can be customized for many parameters including gene and genome names, colors and sizes. Gene attributes can be copied and pasted for rapid and user-friendly customization of homologous genes between species. In addition to Portable Network Graphics and Scalable Vector Graphics, produced representations can be exported as Tagged Image File Format or Encapsulated PostScript, formats that are standard for publication. Hands-on tutorials with real life examples inspired from publications are available for training. Gene Graphics is freely available at https://katlabs.cc/genegraphics/ and source code is hosted at https://github.com/katlabs/genegraphics. katherinejh@ufl.edu or remizallot@ufl.edu. Supplementary data are available at Bioinformatics online.

A user's guide for DTIZE an interactive digitizing and graphical editing computer program

NASA Technical Reports Server (NTRS)

Thomas, C. C.

1981-01-01

A guide for DTIZE, a two dimensional digitizing program with graphical editing capability, is presented. DTIZE provides the capability to simultaneously create and display a picture on the display screen. Data descriptions may be permanently saved in three different formats. DTIZE creates the picture graphics in the locator mode, thus inputting one coordinate each time the terminator button is pushed. Graphic input devices (GIN) are also used to select function command menu. These menu commands and the program's interactive prompting sequences provide a complete capability for creating, editing, and permanently recording a graphical picture file. DTIZE is written in FORTRAN IV language for the Tektronix 4081 graphic system utilizing the Plot 80 Distributed Graphics Library (DGL) subroutines. The Tektronix 4953/3954 Graphic Tablet with mouse, pen, or joystick are used as graphics input devices to create picture graphics.

SVGenes: a library for rendering genomic features in scalable vector graphic format.

PubMed

Etherington, Graham J; MacLean, Daniel

2013-08-01

Drawing genomic features in attractive and informative ways is a key task in visualization of genomics data. Scalable Vector Graphics (SVG) format is a modern and flexible open standard that provides advanced features including modular graphic design, advanced web interactivity and animation within a suitable client. SVGs do not suffer from loss of image quality on re-scaling and provide the ability to edit individual elements of a graphic on the whole object level independent of the whole image. These features make SVG a potentially useful format for the preparation of publication quality figures including genomic objects such as genes or sequencing coverage and for web applications that require rich user-interaction with the graphical elements. SVGenes is a Ruby-language library that uses SVG primitives to render typical genomic glyphs through a simple and flexible Ruby interface. The library implements a simple Page object that spaces and contains horizontal Track objects that in turn style, colour and positions features within them. Tracks are the level at which visual information is supplied providing the full styling capability of the SVG standard. Genomic entities like genes, transcripts and histograms are modelled in Glyph objects that are attached to a track and take advantage of SVG primitives to render the genomic features in a track as any of a selection of defined glyphs. The feature model within SVGenes is simple but flexible and not dependent on particular existing gene feature formats meaning graphics for any existing datasets can easily be created without need for conversion. The library is provided as a Ruby Gem from https://rubygems.org/gems/bio-svgenes under the MIT license, and open source code is available at https://github.com/danmaclean/bioruby-svgenes also under the MIT License. dan.maclean@tsl.ac.uk.

Understanding Children's Concept Formation and Writing Emergence from the Perspective of Graphical Multi-Signification: Evidence and Pedagogical Implications

ERIC Educational Resources Information Center

Wu, Li-Yuan

2013-01-01

This qualitative study examined children's concept formation and writing emergence from the perspective of graphical multi-signification by observing the free drawing activities provided by four girls and six boys, aged four to five, in a Chinese class at a Chinese heritage language school in the USA. Children's capacity for graphical…

NASTRAN analysis of Tokamak vacuum vessel using interactive graphics

NASA Technical Reports Server (NTRS)

Miller, A.; Badrian, M.

1978-01-01

Isoparametric quadrilateral and triangular elements were used to represent the vacuum vessel shell structure. For toroidally symmetric loadings, MPCs were employed across model boundaries and rigid format 24 was invoked. Nonsymmetric loadings required the use of the cyclic symmetry analysis available with rigid format 49. NASTRAN served as an important analysis tool in the Tokamak design effort by providing a reliable means for assessing structural integrity. Interactive graphics were employed in the finite element model generation and in the post-processing of results. It was felt that model generation and checkout with interactive graphics reduced the modelling effort and debugging man-hours significantly.

Guidelines for preliminary selection of the optimum interchange type for a specific location

DOT National Transportation Integrated Search

1999-01-01

In Virginia, when new construction or major reconstruction is planned, the current practice is for a location and design engineer to select the interchange type (diamond interchange, single-point urban interchange, trumpet interchange, full cloverlea...

Notes on Operations. The Documentation of Electronic Texts Using Text Encoding Initiative Headers: An Introduction.

ERIC Educational Resources Information Center

Giordano, Richard

1994-01-01

Describes the Text Encoding Initiative (TEI) project and the TEI header, which documents electronic text in a standard interchange format understandable to both librarian catalogers and nonlibrarian text encoders. The form and function of the TEI header is introduced, and its relationship to the MARC record is explained. (10 references) (KRN)

Exploring Equity Properties in Equating Using AP® Examinations. Research Report No. 2012-4

ERIC Educational Resources Information Center

Lee, Eunjung; Lee, Won-Chan; Brennan, Robert L.

2012-01-01

In almost all high-stakes testing programs, test equating is necessary to ensure that test scores across multiple test administrations are equivalent and can be used interchangeably. Test equating becomes even more challenging in mixed-format tests, such as Advanced Placement Program® (AP®) Exams, that contain both multiple-choice and constructed…

LCFM - LIVING COLOR FRAME MAKER: PC GRAPHICS GENERATION AND MANAGEMENT TOOL FOR REAL-TIME APPLICATIONS

NASA Technical Reports Server (NTRS)

Truong, L. V.

1994-01-01

Computer graphics are often applied for better understanding and interpretation of data under observation. These graphics become more complicated when animation is required during "run-time", as found in many typical modern artificial intelligence and expert systems. Living Color Frame Maker is a solution to many of these real-time graphics problems. Living Color Frame Maker (LCFM) is a graphics generation and management tool for IBM or IBM compatible personal computers. To eliminate graphics programming, the graphic designer can use LCFM to generate computer graphics frames. The graphical frames are then saved as text files, in a readable and disclosed format, which can be easily accessed and manipulated by user programs for a wide range of "real-time" visual information applications. For example, LCFM can be implemented in a frame-based expert system for visual aids in management of systems. For monitoring, diagnosis, and/or controlling purposes, circuit or systems diagrams can be brought to "life" by using designated video colors and intensities to symbolize the status of hardware components (via real-time feedback from sensors). Thus status of the system itself can be displayed. The Living Color Frame Maker is user friendly with graphical interfaces, and provides on-line help instructions. All options are executed using mouse commands and are displayed on a single menu for fast and easy operation. LCFM is written in C++ using the Borland C++ 2.0 compiler for IBM PC series computers and compatible computers running MS-DOS. The program requires a mouse and an EGA/VGA display. A minimum of 77K of RAM is also required for execution. The documentation is provided in electronic form on the distribution medium in WordPerfect format. A sample MS-DOS executable is provided on the distribution medium. The standard distribution medium for this program is one 5.25 inch 360K MS-DOS format diskette. The contents of the diskette are compressed using the PKWARE archiving tools. The utility to unarchive the files, PKUNZIP.EXE, is included. The Living Color Frame Maker tool was developed in 1992.

Performance of alternative diamond interchange forms : Volume II--guidelines for selecting alternative diamond interchanges.

DOT National Transportation Integrated Search

2017-01-01

Service interchanges connect freeways to arterial roads and are the backbone of the U.S. road network. Improving the operations of service interchanges is possible by applying one of several new solutions: diverging diamond, single point interchanges...

Geology’s “Super Graphics” and the Public: Missed Opportunities for Geoscience Education

NASA Astrophysics Data System (ADS)

Clary, R. M.; Wandersee, J. H.

2009-12-01

The geosciences are very visual, as demonstrated by the illustration density of maps, graphs, photographs, and diagrams in introductory textbooks. As geoscience students progress, they are further exposed to advanced graphics, such as phase diagrams and subsurface seismic data visualizations. Photographs provide information from distant sites, while multivariate graphics supply a wealth of data for viewers to access. When used effectively, geology graphics have exceptional educational potential. However, geological graphic data are often presented in specialized formats, and are not easily interpreted by an uninformed viewer. In the Howe-Russell Geoscience Complex at Louisiana State University, there is a very large graphic (~ 30 ft x 6 ft) exhibited in a side hall, immediately off the main entrance hall. The graphic, divided into two obvious parts, displays in its lower section seismic data procured in the Gulf of Mexico, from near offshore Louisiana to the end of the continental shelf. The upper section of the graphic reveals drilling block information along the seismic line. Using Tufte’s model of graphic excellence and Paivio’s dual-coding theory, we analyzed the graphic in terms of data density, complexity, legibility, format, and multivariate presentation. We also observed viewers at the site on 5 occasions, and recorded their interactions with the graphic. This graphic can best be described as a Tufte “super graphic.” Its data are high in density and multivariate in nature. Various data sources are combined in a large format to provide a powerful example of a multitude of information within a convenient and condensed presentation. However, our analysis revealed that the graphic misses an opportunity to educate the non-geologist. The information and seismic “language” of the graphic is specific to the geology community, and the information is not interpreted for the lay viewer. The absence of title, descriptions, and symbol keys are detrimental. Terms are not defined. The absence of color keys and annotations is more likely to lead to an appreciation of graphic beauty, without concomitant scientific understanding. We further concluded that in its current location, constraints of space and reflective lighting prohibit the viewer from simultaneously accessing all subsurface data in a “big picture” view. The viewer is not able to fully comprehend the macro/micro aspects of the graphic design within the limited viewing space. The graphic is an example of geoscience education possibility, a possibility that is currently undermined and unrealized by lack of interpretation. Our analysis subsequently informed the development of a model to maximize the graphic’s educational potential, which can be applied to similar geological super graphics for enhanced public scientific understanding. Our model includes interactive displays that apply the auditory-visual dual coding approach to learning. Notations and aural explanations for geological features should increase viewer understanding, and produce an effective informal educational display.

Occupational Survey Report. Visual Information, AFSC 3V0X1

DTIC Science & Technology

2000-04-01

of the career ladder include: Scan artwork using flatbed scanners Convert graphic file formats Design layouts Letter certificates using laser...Design layouts Scan artwork using flatbed scanners Produce artwork using mouse or digitizing tablets Design and produce imagery for web pages Produce...DAFSC 3V031 PERSONNEL TASKS A0034 Scan artwork using flatbed scanners C0065 Design layouts A0004 Convert graphic file formats A0006 Create

Sequencing and Graphic Novels with Primary-Grade Students

ERIC Educational Resources Information Center

Chase, Maggie; Son, Eun Hye; Steiner, Stan

2014-01-01

The authors discuss the burgeoning number of graphic novels being published for young readers (approximately PK-3) and suggest a new term for identifying this format and audience: primary graphic novels (PGNs), for primary level students. They go on to describe a series of lessons they conducted with a class of 1st and 2nd graders to capitalize on…

From Nominal to Quantitative Codification of Content-Neutral Variables in Graphics Research: The Beginnings of a Manifest Content Model.

ERIC Educational Resources Information Center

Crow, Wendell C.

This paper suggests ways in which manifest, physical attributes of graphic elements can be described and measured. It also proposes a preliminary conceptual model that accounts for the readily apparent, measurable variables in a visual message. The graphic elements that are described include format, typeface, and photographs/artwork. The…

Addendum I, BIOPLUME III Graphics Conversion to SURFER Format

EPA Pesticide Factsheets

This procedure can be used to create a SURFER® compatible grid file from Bioplume III input and output graphics. The input data and results from Bioplume III can be contoured and printed directly from SURFER.

Online Imagery: Finding Pictures for Business Documents.

ERIC Educational Resources Information Center

Cosden, Chris

1995-01-01

Discusses the use of America Online and CompuServe to find clip art, photos, and other images for use in desktop publishing projects. Highlights include copyright issues, different graphic formats, graphic conversion programs, compression programs, and downloading. (LRW)

Profex: a graphical user interface for the Rietveld refinement program BGMN.

PubMed

Doebelin, Nicola; Kleeberg, Reinhard

2015-10-01

Profex is a graphical user interface for the Rietveld refinement program BGMN . Its interface focuses on preserving BGMN 's powerful and flexible scripting features by giving direct access to BGMN input files. Very efficient workflows for single or batch refinements are achieved by managing refinement control files and structure files, by providing dialogues and shortcuts for many operations, by performing operations in the background, and by providing import filters for CIF and XML crystal structure files. Refinement results can be easily exported for further processing. State-of-the-art graphical export of diffraction patterns to pixel and vector graphics formats allows the creation of publication-quality graphs with minimum effort. Profex reads and converts a variety of proprietary raw data formats and is thus largely instrument independent. Profex and BGMN are available under an open-source license for Windows, Linux and OS X operating systems.

Profex: a graphical user interface for the Rietveld refinement program BGMN

PubMed Central

Doebelin, Nicola; Kleeberg, Reinhard

2015-01-01

Profex is a graphical user interface for the Rietveld refinement program BGMN. Its interface focuses on preserving BGMN’s powerful and flexible scripting features by giving direct access to BGMN input files. Very efficient workflows for single or batch refinements are achieved by managing refinement control files and structure files, by providing dialogues and shortcuts for many operations, by performing operations in the background, and by providing import filters for CIF and XML crystal structure files. Refinement results can be easily exported for further processing. State-of-the-art graphical export of diffraction patterns to pixel and vector graphics formats allows the creation of publication-quality graphs with minimum effort. Profex reads and converts a variety of proprietary raw data formats and is thus largely instrument independent. Profex and BGMN are available under an open-source license for Windows, Linux and OS X operating systems. PMID:26500466

U.S. Geological Survey National Computer Technology Meeting (7th): Program and Abstracts, Held in New Orleans, Louisiana, April 10-15, 1994

DTIC Science & Technology

1994-01-01

Magnolia Room 8:00 pm - 10:00 pm FrameMaker Techniques - Moderator, Terry A. Reinitz, USGS, WRD, Reston, Va. Wednesday, April 13,1994 7:30 am...Maker Interchange Format (MIF) strings, to an MIF file. The MIF file is imported into a blank FrameMaker template, creating a word-processor-formatted...draft to camera-ready stages using Data General workstations and software packages that include FrameMaker , CorelDRAW, USGS-G2, Statit, and

Downsizer - A Graphical User Interface-Based Application for Browsing, Acquiring, and Formatting Time-Series Data for Hydrologic Modeling

USGS Publications Warehouse

Ward-Garrison, Christian; Markstrom, Steven L.; Hay, Lauren E.

2009-01-01

The U.S. Geological Survey Downsizer is a computer application that selects, downloads, verifies, and formats station-based time-series data for environmental-resource models, particularly the Precipitation-Runoff Modeling System. Downsizer implements the client-server software architecture. The client presents a map-based, graphical user interface that is intuitive to modelers; the server provides streamflow and climate time-series data from over 40,000 measurement stations across the United States. This report is the Downsizer user's manual and provides (1) an overview of the software design, (2) installation instructions, (3) a description of the graphical user interface, (4) a description of selected output files, and (5) troubleshooting information.

Automatic detection of ECG cable interchange by analyzing both morphology and interlead relations.

PubMed

Han, Chengzong; Gregg, Richard E; Feild, Dirk Q; Babaeizadeh, Saeed

2014-01-01

ECG cable interchange can generate erroneous diagnoses. For algorithms detecting ECG cable interchange, high specificity is required to maintain a low total false positive rate because the prevalence of interchange is low. In this study, we propose and evaluate an improved algorithm for automatic detection and classification of ECG cable interchange. The algorithm was developed by using both ECG morphology information and redundancy information. ECG morphology features included QRS-T and P-wave amplitude, frontal axis and clockwise vector loop rotation. The redundancy features were derived based on the EASI™ lead system transformation. The classification was implemented using linear support vector machine. The development database came from multiple sources including both normal subjects and cardiac patients. An independent database was used to test the algorithm performance. Common cable interchanges were simulated by swapping either limb cables or precordial cables. For the whole validation database, the overall sensitivity and specificity for detecting precordial cable interchange were 56.5% and 99.9%, and the sensitivity and specificity for detecting limb cable interchange (excluding left arm-left leg interchange) were 93.8% and 99.9%. Defining precordial cable interchange or limb cable interchange as a single positive event, the total false positive rate was 0.7%. When the algorithm was designed for higher sensitivity, the sensitivity for detecting precordial cable interchange increased to 74.6% and the total false positive rate increased to 2.7%, while the sensitivity for detecting limb cable interchange was maintained at 93.8%. The low total false positive rate was maintained at 0.6% for the more abnormal subset of the validation database including only hypertrophy and infarction patients. The proposed algorithm can detect and classify ECG cable interchanges with high specificity and low total false positive rate, at the cost of decreased sensitivity for certain precordial cable interchanges. The algorithm could also be configured for higher sensitivity for different applications where a lower specificity can be tolerated. Copyright © 2014 Elsevier Inc. All rights reserved.

Designing a Common Interchange Format for Unit Data Using the Command and Control Information Exchange Data Model (C2IEDM) and XSLT

DTIC Science & Technology

2004-09-01

Required> </Equipment> <Equipment code="L44680"> <Description>LAUNCHER GRENADE SMOKE: SCREENING RP M250 </Description> <Required...EquipmentPiecesOnHand> </UnitEquipment> <UnitEquipment> <EquipmentDescription>LAUNCHER GRENADE SMOKE: SCREENING RP M250 </EquipmentDescription

Computational approaches to standard-compliant biofilm data for reliable analysis and integration.

PubMed

Sousa, Ana Margarida; Ferreira, Andreia; Azevedo, Nuno F; Pereira, Maria Olivia; Lourenço, Anália

2012-12-01

The study of microorganism consortia, also known as biofilms, is associated to a number of applications in biotechnology, ecotechnology and clinical domains. Nowadays, biofilm studies are heterogeneous and data-intensive, encompassing different levels of analysis. Computational modelling of biofilm studies has become thus a requirement to make sense of these vast and ever-expanding biofilm data volumes. The rationale of the present work is a machine-readable format for representing biofilm studies and supporting biofilm data interchange and data integration. This format is supported by the Biofilm Science Ontology (BSO), the first ontology on biofilms information. The ontology is decomposed into a number of areas of interest, namely: the Experimental Procedure Ontology (EPO) which describes biofilm experimental procedures; the Colony Morphology Ontology (CMO) which characterises morphologically microorganism colonies; and other modules concerning biofilm phenotype, antimicrobial susceptibility and virulence traits. The overall objective behind BSO is to develop semantic resources to capture, represent and share data on biofilms and related experiments in a regularized fashion manner. Furthermore, the present work also introduces a framework in assistance of biofilm data interchange and analysis - BiofOmics (http://biofomics.org) - and a public repository on colony morphology signatures - MorphoCol (http://stardust.deb.uminho.pt/morphocol).

Computational approaches to standard-compliant biofilm data for reliable analysis and integration.

PubMed

Sousa, Ana Margarida; Ferreira, Andreia; Azevedo, Nuno F; Pereira, Maria Olivia; Lourenço, Anália

2012-07-24

The study of microorganism consortia, also known as biofilms, is associated to a number of applications in biotechnology, ecotechnology and clinical domains. Nowadays, biofilm studies are heterogeneous and data-intensive, encompassing different levels of analysis. Computational modelling of biofilm studies has become thus a requirement to make sense of these vast and ever-expanding biofilm data volumes. The rationale of the present work is a machine-readable format for representing biofilm studies and supporting biofilm data interchange and data integration. This format is supported by the Biofilm Science Ontology (BSO), the first ontology on biofilms information. The ontology is decomposed into a number of areas of interest, namely: the Experimental Procedure Ontology (EPO) which describes biofilm experimental procedures; the Colony Morphology Ontology (CMO) which characterises morphologically microorganism colonies; and other modules concerning biofilm phenotype, antimicrobial susceptibility and virulence traits. The overall objective behind BSO is to develop semantic resources to capture, represent and share data on biofilms and related experiments in a regularized fashion manner. Furthermore, the present work also introduces a framework in assistance of biofilm data interchange and analysis - BiofOmics (http://biofomics.org) - and a public repository on colony morphology signatures - MorphoCol (http://stardust.deb.uminho.pt/morphocol).

A standard format and a graphical user interface for spin system specification.

PubMed

Biternas, A G; Charnock, G T P; Kuprov, Ilya

2014-03-01

We introduce a simple and general XML format for spin system description that is the result of extensive consultations within Magnetic Resonance community and unifies under one roof all major existing spin interaction specification conventions. The format is human-readable, easy to edit and easy to parse using standard XML libraries. We also describe a graphical user interface that was designed to facilitate construction and visualization of complicated spin systems. The interface is capable of generating input files for several popular spin dynamics simulation packages. Copyright © 2014 The Authors. Published by Elsevier Inc. All rights reserved.

Designing a Graphical Decision Support Tool to Improve System Acquisition Decisions

DTIC Science & Technology

2009-06-01

relationships within the data [9]. Displaying acquisition data in a graphical manner was chosen because graphical formats, in general, have been...acquisition plan which includes information pertaining to the acquisition objectives, the required capability of the system, design trade-off, budgeting...which introduce artificial neural networks to approximate the real world experience of an acquisition manager [8]. However, these strategies lack a

Systematization of published research graphics characterizing weakly bound molecular complexes with carbon dioxide

NASA Astrophysics Data System (ADS)

Lavrentiev, N. A.; Rodimova, O. B.; Fazliev, A. Z.; Vigasin, A. A.

2017-11-01

An approach is suggested to the formation of applied ontologies in subject domains where results are represented in graphical form. An approach to systematization of research graphics is also given which contains information on weakly bound carbon dioxide complexes. The results of systematization of research plots and images that characterize the spectral properties of the CO2 complexes are presented.

Format Guide for Scientific and Technical Reports.

DTIC Science & Technology

1984-01-01

supported by the discussion. Graphkic Services The Graphic Services Section (Code 2632) provides a variety of layout and design services. Camera-ready artwork...complex typography , elaborate graphic elements, extensive computer printouts, and other unusual materials that explain the project. With few exceptions...2630 Publications Branch Office 222/253 72379 S Publications Control Center 222/253 73508 Editorial 222/253 72782 Graphic Services 222/234 72756 73989

Program Aids Specification Of Multiple-Block Grids

NASA Technical Reports Server (NTRS)

Sorenson, R. L.; Mccann, K. M.

1993-01-01

3DPREP computer program aids specification of multiple-block computational grids. Highly interactive graphical preprocessing program designed for use on powerful graphical scientific computer workstation. Divided into three main parts, each corresponding to principal graphical-and-alphanumerical display. Relieves user of some burden of collecting and formatting many data needed to specify blocks and grids, and prepares input data for NASA's 3DGRAPE grid-generating computer program.

Semantically Grounded Briefings

DTIC Science & Technology

2005-12-01

cascading interface, mirroring the class inheritance of the ontologies. Clicking on one of these tools, like PowerPoint’s native autoshape tools...connections are their graphic templates. This determines the appearance of an instance of that concept. Any of PowerPoint’s native autoshapes , formatted...which can be any PowerPoint autoshape , group shape, or image • Identification of a modulated component of C’s graphic template. If C’s graphic

Applications of graphics to support a testbed for autonomous space vehicle operations

NASA Technical Reports Server (NTRS)

Schmeckpeper, K. R.; Aldridge, J. P.; Benson, S.; Horner, S.; Kullman, A.; Mulder, T.; Parrott, W.; Roman, D.; Watts, G.; Bochsler, Daniel C.

1989-01-01

Researchers describe their experience using graphics tools and utilities while building an application, AUTOPS, that uses a graphical Machintosh (TM)-like interface for the input and display of data, and animation graphics to enhance the presentation of results of autonomous space vehicle operations simulations. AUTOPS is a test bed for evaluating decisions for intelligent control systems for autonomous vehicles. Decisions made by an intelligent control system, e.g., a revised mission plan, might be displayed to the user in textual format or he can witness the effects of those decisions via out of window graphics animations. Although a textual description conveys essentials, a graphics animation conveys the replanning results in a more convincing way. Similarily, iconic and menu-driven screen interfaces provide the user with more meaningful options and displays. Presented here are experiences with the SunView and TAE Plus graphics tools used for interface design, and the Johnson Space Center Interactive Graphics Laboratory animation graphics tools used for generating out out of the window graphics.

Safety analysis of the new synchronized and milwaukee B interchanges in comparison to existing designs.

PubMed

Molan, Amirarsalan Mehrara; Hummer, Joseph E

2017-12-01

Interchanges have high crash rates and large impacts on traffic operations. The main objective of this research is to analyze the safety performance of two new interchanges, the synchronized interchange and the Milwaukee B interchange. The primary method of study was microscopic simulation modeling using the Surrogate Safety Assessment Model (SSAM) program to estimate the quantity and type of conflicting interactions in each interchange. A comprehensive series of simulation scenarios were considered to include different conditions of traffic volumes, traffic turning ratios, traffic distribution, and heavy vehicles percentages. Afterward, outcomes were analyzed with two-way Analyses of Variance (ANOVAs) to compare the mean values of conflicts. Based on the results, the diverging diamond interchange (DDI) and Milwaukee B were the safest designs regarding observed conflicting interactions in the simulation models; however, the DDI did not seem as reliable from the viewpoint of wrong way movements. The new synchronized interchange, the parclo B, and the Milwaukee A (an existing interchange in Milwaukee, WI) showed the same rate of conflicts. The synchronized interchange may be advantageous because it was estimated to reduce the severity of crashes due to fewer crossing conflicts, a lower speed of conflicts, and a higher time to collision. The conventional diamond was the most dangerous design based on our measures. The DDI and the synchronized interchange look like plausible substitutes for reconstructing an unsafe diamond interchange due to the similarities in their required space. Copyright © 2017 Elsevier Ltd. All rights reserved.

Infographic Strategies: Publications' Staffs, Assisted by Desktop Publishing, Tell Stories in Visuals Second to None.

ERIC Educational Resources Information Center

Jordan, Jim

1988-01-01

Summarizes how infograhics are produced and how they provide information graphically in high school publications. Offers suggestions concerning information gathering, graphic format, and software selection, and provides examples of computer/student designed infographics. (MM)

Development of a Flight Simulation Data Visualization Workstation

NASA Technical Reports Server (NTRS)

Kaplan, Joseph A.; Chen, Ronnie; Kenney, Patrick S.; Koval, Christopher M.; Hutchinson, Brian K.

1996-01-01

Today's moderm flight simulation research produces vast amounts of time sensitive data. The meaning of this data can be difficult to assess while in its raw format . Therefore, a method of breaking the data down and presenting it to the user in a graphical format is necessary. Simulation Graphics (SimGraph) is intended as a data visualization software package that will incorporate simulation data into a variety of animated graphical displays for easy interpretation by the simulation researcher. Although it was created for the flight simulation facilities at NASA Langley Research Center, SimGraph can be reconfigured to almost any data visualization environment. This paper traces the design, development and implementation of the SimGraph program, and is intended to be a programmer's reference guide.

TRASYS - THERMAL RADIATION ANALYZER SYSTEM (DEC VAX VERSION WITH NASADIG)

NASA Technical Reports Server (NTRS)

Anderson, G. E.

1994-01-01

The Thermal Radiation Analyzer System, TRASYS, is a computer software system with generalized capability to solve the radiation related aspects of thermal analysis problems. TRASYS computes the total thermal radiation environment for a spacecraft in orbit. The software calculates internode radiation interchange data as well as incident and absorbed heat rate data originating from environmental radiant heat sources. TRASYS provides data of both types in a format directly usable by such thermal analyzer programs as SINDA/FLUINT (available from COSMIC, program number MSC-21528). One primary feature of TRASYS is that it allows users to write their own driver programs to organize and direct the preprocessor and processor library routines in solving specific thermal radiation problems. The preprocessor first reads and converts the user's geometry input data into the form used by the processor library routines. Then, the preprocessor accepts the user's driving logic, written in the TRASYS modified FORTRAN language. In many cases, the user has a choice of routines to solve a given problem. Users may also provide their own routines where desirable. In particular, the user may write output routines to provide for an interface between TRASYS and any thermal analyzer program using the R-C network concept. Input to the TRASYS program consists of Options and Edit data, Model data, and Logic Flow and Operations data. Options and Edit data provide for basic program control and user edit capability. The Model data describe the problem in terms of geometry and other properties. This information includes surface geometry data, documentation data, nodal data, block coordinate system data, form factor data, and flux data. Logic Flow and Operations data house the user's driver logic, including the sequence of subroutine calls and the subroutine library. Output from TRASYS consists of two basic types of data: internode radiation interchange data, and incident and absorbed heat rate data. The flexible structure of TRASYS allows considerable freedom in the definition and choice of solution method for a thermal radiation problem. The program's flexible structure has also allowed TRASYS to retain the same basic input structure as the authors update it in order to keep up with changing requirements. Among its other important features are the following: 1) up to 3200 node problem size capability with shadowing by intervening opaque or semi-transparent surfaces; 2) choice of diffuse, specular, or diffuse/specular radiant interchange solutions; 3) a restart capability that minimizes recomputing; 4) macroinstructions that automatically provide the executive logic for orbit generation that optimizes the use of previously completed computations; 5) a time variable geometry package that provides automatic pointing of the various parts of an articulated spacecraft and an automatic look-back feature that eliminates redundant form factor calculations; 6) capability to specify submodel names to identify sets of surfaces or components as an entity; and 7) subroutines to perform functions which save and recall the internodal and/or space form factors in subsequent steps for nodes with fixed geometry during a variable geometry run. There are two machine versions of TRASYS v27: a DEC VAX version and a Cray UNICOS version. Both versions require installation of the NASADIG library (MSC-21801 for DEC VAX or COS-10049 for CRAY), which is available from COSMIC either separately or bundled with TRASYS. The NASADIG (NASA Device Independent Graphics Library) plot package provides a pictorial representation of input geometry, orbital/orientation parameters, and heating rate output as a function of time. NASADIG supports Tektronix terminals. The CRAY version of TRASYS v27 is written in FORTRAN 77 for batch or interactive execution and has been implemented on CRAY X-MP and CRAY Y-MP series computers running UNICOS. The standard distribution medium for MSC-21959 (CRAY version without NASADIG) is a 1600 BPI 9-track magnetic tape in UNIX tar format. The standard distribution medium for COS-10040 (CRAY version with NASADIG) is a set of two 6250 BPI 9-track magnetic tapes in UNIX tar format. Alternate distribution media and formats are available upon request. The DEC VAX version of TRASYS v27 is written in FORTRAN 77 for batch execution (only the plotting driver program is interactive) and has been implemented on a DEC VAX 8650 computer under VMS. Since the source codes for MSC-21030 and COS-10026 are in VAX/VMS text library files and DEC Command Language files, COSMIC will only provide these programs in the following formats: MSC-21030, TRASYS (DEC VAX version without NASADIG) is available on a 1600 BPI 9-track magnetic tape in VAX BACKUP format (standard distribution medium) or in VAX BACKUP format on a TK50 tape cartridge; COS-10026, TRASYS (DEC VAX version with NASADIG), is available in VAX BACKUP format on a set of three 6250 BPI 9-track magnetic tapes (standard distribution medium) or a set of three TK50 tape cartridges in VAX BACKUP format. TRASYS was last updated in 1993.

TRASYS - THERMAL RADIATION ANALYZER SYSTEM (CRAY VERSION WITH NASADIG)

NASA Technical Reports Server (NTRS)

Anderson, G. E.

1994-01-01

The Thermal Radiation Analyzer System, TRASYS, is a computer software system with generalized capability to solve the radiation related aspects of thermal analysis problems. TRASYS computes the total thermal radiation environment for a spacecraft in orbit. The software calculates internode radiation interchange data as well as incident and absorbed heat rate data originating from environmental radiant heat sources. TRASYS provides data of both types in a format directly usable by such thermal analyzer programs as SINDA/FLUINT (available from COSMIC, program number MSC-21528). One primary feature of TRASYS is that it allows users to write their own driver programs to organize and direct the preprocessor and processor library routines in solving specific thermal radiation problems. The preprocessor first reads and converts the user's geometry input data into the form used by the processor library routines. Then, the preprocessor accepts the user's driving logic, written in the TRASYS modified FORTRAN language. In many cases, the user has a choice of routines to solve a given problem. Users may also provide their own routines where desirable. In particular, the user may write output routines to provide for an interface between TRASYS and any thermal analyzer program using the R-C network concept. Input to the TRASYS program consists of Options and Edit data, Model data, and Logic Flow and Operations data. Options and Edit data provide for basic program control and user edit capability. The Model data describe the problem in terms of geometry and other properties. This information includes surface geometry data, documentation data, nodal data, block coordinate system data, form factor data, and flux data. Logic Flow and Operations data house the user's driver logic, including the sequence of subroutine calls and the subroutine library. Output from TRASYS consists of two basic types of data: internode radiation interchange data, and incident and absorbed heat rate data. The flexible structure of TRASYS allows considerable freedom in the definition and choice of solution method for a thermal radiation problem. The program's flexible structure has also allowed TRASYS to retain the same basic input structure as the authors update it in order to keep up with changing requirements. Among its other important features are the following: 1) up to 3200 node problem size capability with shadowing by intervening opaque or semi-transparent surfaces; 2) choice of diffuse, specular, or diffuse/specular radiant interchange solutions; 3) a restart capability that minimizes recomputing; 4) macroinstructions that automatically provide the executive logic for orbit generation that optimizes the use of previously completed computations; 5) a time variable geometry package that provides automatic pointing of the various parts of an articulated spacecraft and an automatic look-back feature that eliminates redundant form factor calculations; 6) capability to specify submodel names to identify sets of surfaces or components as an entity; and 7) subroutines to perform functions which save and recall the internodal and/or space form factors in subsequent steps for nodes with fixed geometry during a variable geometry run. There are two machine versions of TRASYS v27: a DEC VAX version and a Cray UNICOS version. Both versions require installation of the NASADIG library (MSC-21801 for DEC VAX or COS-10049 for CRAY), which is available from COSMIC either separately or bundled with TRASYS. The NASADIG (NASA Device Independent Graphics Library) plot package provides a pictorial representation of input geometry, orbital/orientation parameters, and heating rate output as a function of time. NASADIG supports Tektronix terminals. The CRAY version of TRASYS v27 is written in FORTRAN 77 for batch or interactive execution and has been implemented on CRAY X-MP and CRAY Y-MP series computers running UNICOS. The standard distribution medium for MSC-21959 (CRAY version without NASADIG) is a 1600 BPI 9-track magnetic tape in UNIX tar format. The standard distribution medium for COS-10040 (CRAY version with NASADIG) is a set of two 6250 BPI 9-track magnetic tapes in UNIX tar format. Alternate distribution media and formats are available upon request. The DEC VAX version of TRASYS v27 is written in FORTRAN 77 for batch execution (only the plotting driver program is interactive) and has been implemented on a DEC VAX 8650 computer under VMS. Since the source codes for MSC-21030 and COS-10026 are in VAX/VMS text library files and DEC Command Language files, COSMIC will only provide these programs in the following formats: MSC-21030, TRASYS (DEC VAX version without NASADIG) is available on a 1600 BPI 9-track magnetic tape in VAX BACKUP format (standard distribution medium) or in VAX BACKUP format on a TK50 tape cartridge; COS-10026, TRASYS (DEC VAX version with NASADIG), is available in VAX BACKUP format on a set of three 6250 BPI 9-track magnetic tapes (standard distribution medium) or a set of three TK50 tape cartridges in VAX BACKUP format. TRASYS was last updated in 1993.

TRASYS - THERMAL RADIATION ANALYZER SYSTEM (DEC VAX VERSION WITHOUT NASADIG)

NASA Technical Reports Server (NTRS)

Vogt, R. A.

1994-01-01

The Thermal Radiation Analyzer System, TRASYS, is a computer software system with generalized capability to solve the radiation related aspects of thermal analysis problems. TRASYS computes the total thermal radiation environment for a spacecraft in orbit. The software calculates internode radiation interchange data as well as incident and absorbed heat rate data originating from environmental radiant heat sources. TRASYS provides data of both types in a format directly usable by such thermal analyzer programs as SINDA/FLUINT (available from COSMIC, program number MSC-21528). One primary feature of TRASYS is that it allows users to write their own driver programs to organize and direct the preprocessor and processor library routines in solving specific thermal radiation problems. The preprocessor first reads and converts the user's geometry input data into the form used by the processor library routines. Then, the preprocessor accepts the user's driving logic, written in the TRASYS modified FORTRAN language. In many cases, the user has a choice of routines to solve a given problem. Users may also provide their own routines where desirable. In particular, the user may write output routines to provide for an interface between TRASYS and any thermal analyzer program using the R-C network concept. Input to the TRASYS program consists of Options and Edit data, Model data, and Logic Flow and Operations data. Options and Edit data provide for basic program control and user edit capability. The Model data describe the problem in terms of geometry and other properties. This information includes surface geometry data, documentation data, nodal data, block coordinate system data, form factor data, and flux data. Logic Flow and Operations data house the user's driver logic, including the sequence of subroutine calls and the subroutine library. Output from TRASYS consists of two basic types of data: internode radiation interchange data, and incident and absorbed heat rate data. The flexible structure of TRASYS allows considerable freedom in the definition and choice of solution method for a thermal radiation problem. The program's flexible structure has also allowed TRASYS to retain the same basic input structure as the authors update it in order to keep up with changing requirements. Among its other important features are the following: 1) up to 3200 node problem size capability with shadowing by intervening opaque or semi-transparent surfaces; 2) choice of diffuse, specular, or diffuse/specular radiant interchange solutions; 3) a restart capability that minimizes recomputing; 4) macroinstructions that automatically provide the executive logic for orbit generation that optimizes the use of previously completed computations; 5) a time variable geometry package that provides automatic pointing of the various parts of an articulated spacecraft and an automatic look-back feature that eliminates redundant form factor calculations; 6) capability to specify submodel names to identify sets of surfaces or components as an entity; and 7) subroutines to perform functions which save and recall the internodal and/or space form factors in subsequent steps for nodes with fixed geometry during a variable geometry run. There are two machine versions of TRASYS v27: a DEC VAX version and a Cray UNICOS version. Both versions require installation of the NASADIG library (MSC-21801 for DEC VAX or COS-10049 for CRAY), which is available from COSMIC either separately or bundled with TRASYS. The NASADIG (NASA Device Independent Graphics Library) plot package provides a pictorial representation of input geometry, orbital/orientation parameters, and heating rate output as a function of time. NASADIG supports Tektronix terminals. The CRAY version of TRASYS v27 is written in FORTRAN 77 for batch or interactive execution and has been implemented on CRAY X-MP and CRAY Y-MP series computers running UNICOS. The standard distribution medium for MSC-21959 (CRAY version without NASADIG) is a 1600 BPI 9-track magnetic tape in UNIX tar format. The standard distribution medium for COS-10040 (CRAY version with NASADIG) is a set of two 6250 BPI 9-track magnetic tapes in UNIX tar format. Alternate distribution media and formats are available upon request. The DEC VAX version of TRASYS v27 is written in FORTRAN 77 for batch execution (only the plotting driver program is interactive) and has been implemented on a DEC VAX 8650 computer under VMS. Since the source codes for MSC-21030 and COS-10026 are in VAX/VMS text library files and DEC Command Language files, COSMIC will only provide these programs in the following formats: MSC-21030, TRASYS (DEC VAX version without NASADIG) is available on a 1600 BPI 9-track magnetic tape in VAX BACKUP format (standard distribution medium) or in VAX BACKUP format on a TK50 tape cartridge; COS-10026, TRASYS (DEC VAX version with NASADIG), is available in VAX BACKUP format on a set of three 6250 BPI 9-track magnetic tapes (standard distribution medium) or a set of three TK50 tape cartridges in VAX BACKUP format. TRASYS was last updated in 1993.

Performance of alternative diamond interchange forms : volume I -- research report.

DOT National Transportation Integrated Search

2017-01-01

Service interchanges connect freeways to arterial roads and are the backbone of the U.S. road network. Improving the operations of service interchanges is possible by applying one of several new solutions: diverging diamond, single point interchanges...

WEB Services Networks and Technological Hybrids — The Integration Challenges of WAN Distributed Computing for ASP Providers

NASA Astrophysics Data System (ADS)

Mroczkiewicz, Pawel

A necessity of integration of both information systems and office software existing in organizations has had a long history. The beginning of this kind of solutions reaches back to the old generation of network protocols called EDI (Electronic Data Interchange) and EDIFACT standard, which was initiated in 1988 and has dynamically evolved ever since (S. Michalski, M. Suskiewicz, 1995). The mentioned protocol was usually used for converting documents into natural formats processed by applications. It caused problems with binary files and, furthermore, the communication mechanisms had to be modified each time new documents or applications were added. When we compare EDI with the previously used communication mechanisms, EDI was a great step forward as it was the first, big scale attempt to define standards of data interchange between the applications in business transactions (V. Leyland, 1995, p. 47).

Authoritative Authoring: Software That Makes Multimedia Happen.

ERIC Educational Resources Information Center

Florio, Chris; Murie, Michael

1996-01-01

Compares seven mid- to high-end multimedia authoring software systems that combine graphics, sound, animation, video, and text for Windows and Macintosh platforms. A run-time project was created with each program using video, animation, graphics, sound, formatted text, hypertext, and buttons. (LRW)

Redesigning Your Periodical? Start Here!

ERIC Educational Resources Information Center

D'Alelio, Jane

1980-01-01

Graphics help communicate the image of a publication and of the institution: good graphics gain the readers' attention, and good content gains their respect. Survey of readers, development of a content formula, format, cover, nameplate, typography, photographs, artwork, and paper and color choices are discussed. (MLW)

Interchange Reconnection and Coronal Hole Dynamics

NASA Technical Reports Server (NTRS)

Edmondson, J. K.; Antiochos, S. K.; DeVore, C. R.; Lynch, B. J.; Zurbuchen, T. H.

2011-01-01

We investigate the effect of magnetic reconnection between open and closed field, (often referred to as "interchange" reconnection), on the dynamics and topology of coronal hole boundaries. The most important and most prevalent 3D topology of the interchange process is that of a small-scale bipolar magnetic field interacting with a large-scale background field. We determine the evolution of such a magnetic topology by numerical solution of the fully 3D MHD equations in spherical coordinates. First, we calculate the evolution of a small-scale bipole that initially is completely inside an open field region and then is driven across a coronal hole boundary by photospheric motions. Next the reverse situation is calculated in which the bipole is initially inside the closed region and driven toward the coronal hole boundary. In both cases we find that the stress imparted by the photospheric motions results in deformation of the separatrix surface between the closed field of the bipole and the background field, leading to rapid current sheet formation and to efficient reconnection. When the bipole is inside the open field region, the reconnection is of the interchange type in that it exchanges open and closed field. We examine, in detail, the topology of the field as the bipole moves across the coronal hole boundary, and find that the field remains well-connected throughout this process. Our results imply that open flux cannot penetrate deeply into the closed field region below a helmet streamer and, hence, support the quasi-steady models in which open and closed flux remain topologically distinct. Our results also support the uniqueness hypothesis for open field regions as postulated by Antiochos et al. We discuss the implications of this work for coronal observations. Subject Headings: Sun: corona Sun: magnetic fields Sun: reconnection Sun: coronal hole

Geovisualization of land use and land cover using bivariate maps and Sankey flow diagrams

NASA Astrophysics Data System (ADS)

Strode, Georgianna; Mesev, Victor; Thornton, Benjamin; Jerez, Marjorie; Tricarico, Thomas; McAlear, Tyler

2018-05-01

The terms `land use' and `land cover' typically describe categories that convey information about the landscape. Despite the major difference of land use implying some degree of anthropogenic disturbance, the two terms are commonly used interchangeably, especially when anthropogenic disturbance is ambiguous, say managed forestland or abandoned agricultural fields. Cartographically, land use and land cover are also sometimes represented interchangeably within common legends, giving with the impression that the landscape is a seamless continuum of land use parcels spatially adjacent to land cover tracts. We believe this is misleading, and feel we need to reiterate the well-established symbiosis of land uses as amalgams of land covers; in other words land covers are subsets of land use. Our paper addresses this spatially complex, and frequently ambiguous relationship, and posits that bivariate cartographic techniques are an ideal vehicle for representing both land use and land cover simultaneously. In more specific terms, we explore the use of nested symbology as ways to represent graphically land use and land cover, where land cover are circles nested with land use squares. We also investigate bivariate legends for representing statistical covariance as a means for visualizing the combinations of land use and cover. Lastly, we apply Sankey flow diagrams to further illustrate the complex, multifaceted relationships between land use and land cover. Our work is demonstrated on data representing land use and cover data for the US state of Florida.

The impact of numeric and graphic displays of ST-segment deviation levels on cardiologists' decisions of reperfusion therapy for patients with acute coronary occlusion.

PubMed

Nimmermark, Magnus O; Wang, John J; Maynard, Charles; Cohen, Mauricio; Gilcrist, Ian; Heitner, John; Hudson, Michael; Palmeri, Sebastian; Wagner, Galen S; Pahlm, Olle

2011-01-01

The study purpose is to determine whether numeric and/or graphic ST measurements added to the display of the 12-lead electrocardiogram (ECG) would influence cardiologists' decision to provide myocardial reperfusion therapy. Twenty ECGs with borderline ST-segment deviation during elective percutaneous coronary intervention and 10 controls before balloon inflation were included. Only 5 of the 20 ECGs during coronary balloon occlusion met the 2007 American Heart Association guidelines for ST-elevation myocardial infarction (STEMI). Fifteen cardiologists read 4 sets of these ECGs as the basis for a "yes/no" reperfusion therapy decision. Sets 1 and 4 were the same 12-lead ECGs alone. Set 2 also included numeric ST-segment measurements, and set 3 included both numeric and graphically displayed ST measurements ("ST Maps"). The mean (range) positive reperfusion decisions were 10.6 (2-15), 11.4 (1-19), 9.7 (2-14), and 10.7 (1-15) for sets 1 to 4, respectively. The accuracies of the observers for the 5 STEMI ECGs were 67%, 69%, and 77% for the standard format, the ST numeric format, and the ST graphic format, respectively. The improved detection rate (77% vs 67%) with addition of both numeric and graphic displays did achieve statistical significance (P < .025). The corresponding specificities for the 10 control ECGs were 85%, 79%, and 89%, respectively. In conclusion, a wide variation of reperfusion decisions was observed among clinical cardiologists, and their decisions were not altered by adding ST deviation measurements in numeric and/or graphic displays. Acute coronary occlusion detection rate was low for ECGs meeting STEMI criteria, and this was improved by adding ST-segment measurements in numeric and graphic forms. These results merit further study of the clinical value of this technique for improved acute coronary occlusion treatment decision support. Copyright © 2011 Elsevier Inc. All rights reserved.

Graphic Display of Larger Sentence Dependency Structures.

ERIC Educational Resources Information Center

Craven, Timothy C.

1991-01-01

Outlines desirable qualities for graphic representation of sentence dependency structures in texts more than a few sentences in length. Several different display formats prototyped in the TEXNET experimental text structure management system are described, illustrated, and compared, and automatic structure manipulations are discussed. (36…

NLEdit: A generic graphical user interface for Fortran programs

NASA Technical Reports Server (NTRS)

Curlett, Brian P.

1994-01-01

NLEdit is a generic graphical user interface for the preprocessing of Fortran namelist input files. The interface consists of a menu system, a message window, a help system, and data entry forms. A form is generated for each namelist. The form has an input field for each namelist variable along with a one-line description of that variable. Detailed help information, default values, and minimum and maximum allowable values can all be displayed via menu picks. Inputs are processed through a scientific calculator program that allows complex equations to be used instead of simple numeric inputs. A custom user interface is generated simply by entering information about the namelist input variables into an ASCII file. There is no need to learn a new graphics system or programming language. NLEdit can be used as a stand-alone program or as part of a larger graphical user interface. Although NLEdit is intended for files using namelist format, it can be easily modified to handle other file formats.

Caryoscope: An Open Source Java application for viewing microarray data in a genomic context

PubMed Central

Awad, Ihab AB; Rees, Christian A; Hernandez-Boussard, Tina; Ball, Catherine A; Sherlock, Gavin

2004-01-01

Background Microarray-based comparative genome hybridization experiments generate data that can be mapped onto the genome. These data are interpreted more easily when represented graphically in a genomic context. Results We have developed Caryoscope, which is an open source Java application for visualizing microarray data from array comparative genome hybridization experiments in a genomic context. Caryoscope can read General Feature Format files (GFF files), as well as comma- and tab-delimited files, that define the genomic positions of the microarray reporters for which data are obtained. The microarray data can be browsed using an interactive, zoomable interface, which helps users identify regions of chromosomal deletion or amplification. The graphical representation of the data can be exported in a number of graphic formats, including publication-quality formats such as PostScript. Conclusion Caryoscope is a useful tool that can aid in the visualization, exploration and interpretation of microarray data in a genomic context. PMID:15488149

Interstate Highway Interchanges Reshape Rural Communities.

ERIC Educational Resources Information Center

Moon, Henry E., Jr.

1987-01-01

Highway interchanges offer rural counties practically ready-made sites for development, but some interchanges offer better development opportunities than others. A study of a Kentucky interchange identified seven factors that make a difference in development, including traffic volume, distance to an urban area, ruggedness of terrain, and sale of…

Web-GIS platform for monitoring and forecasting of regional climate and ecological changes

NASA Astrophysics Data System (ADS)

Gordov, E. P.; Krupchatnikov, V. N.; Lykosov, V. N.; Okladnikov, I.; Titov, A. G.; Shulgina, T. M.

2012-12-01

Growing volume of environmental data from sensors and model outputs makes development of based on modern information-telecommunication technologies software infrastructure for information support of integrated scientific researches in the field of Earth sciences urgent and important task (Gordov et al, 2012, van der Wel, 2005). It should be considered that original heterogeneity of datasets obtained from different sources and institutions not only hampers interchange of data and analysis results but also complicates their intercomparison leading to a decrease in reliability of analysis results. However, modern geophysical data processing techniques allow combining of different technological solutions for organizing such information resources. Nowadays it becomes a generally accepted opinion that information-computational infrastructure should rely on a potential of combined usage of web- and GIS-technologies for creating applied information-computational web-systems (Titov et al, 2009, Gordov et al. 2010, Gordov, Okladnikov and Titov, 2011). Using these approaches for development of internet-accessible thematic information-computational systems, and arranging of data and knowledge interchange between them is a very promising way of creation of distributed information-computation environment for supporting of multidiscipline regional and global research in the field of Earth sciences including analysis of climate changes and their impact on spatial-temporal vegetation distribution and state. Experimental software and hardware platform providing operation of a web-oriented production and research center for regional climate change investigations which combines modern web 2.0 approach, GIS-functionality and capabilities of running climate and meteorological models, large geophysical datasets processing, visualization, joint software development by distributed research groups, scientific analysis and organization of students and post-graduate students education is presented. Platform software developed (Shulgina et al, 2012, Okladnikov et al, 2012) includes dedicated modules for numerical processing of regional and global modeling results for consequent analysis and visualization. Also data preprocessing, run and visualization of modeling results of models WRF and «Planet Simulator» integrated into the platform is provided. All functions of the center are accessible by a user through a web-portal using common graphical web-browser in the form of an interactive graphical user interface which provides, particularly, capabilities of visualization of processing results, selection of geographical region of interest (pan and zoom) and data layers manipulation (order, enable/disable, features extraction). Platform developed provides users with capabilities of heterogeneous geophysical data analysis, including high-resolution data, and discovering of tendencies in climatic and ecosystem changes in the framework of different multidisciplinary researches (Shulgina et al, 2011). Using it even unskilled user without specific knowledge can perform computational processing and visualization of large meteorological, climatological and satellite monitoring datasets through unified graphical web-interface.

SimGraph: A Flight Simulation Data Visualization Workstation

NASA Technical Reports Server (NTRS)

Kaplan, Joseph A.; Kenney, Patrick S.

1997-01-01

Today's modern flight simulation research produces vast amounts of time sensitive data, making a qualitative analysis of the data difficult while it remains in a numerical representation. Therefore, a method of merging related data together and presenting it to the user in a more comprehensible format is necessary. Simulation Graphics (SimGraph) is an object-oriented data visualization software package that presents simulation data in animated graphical displays for easy interpretation. Data produced from a flight simulation is presented by SimGraph in several different formats, including: 3-Dimensional Views, Cockpit Control Views, Heads-Up Displays, Strip Charts, and Status Indicators. SimGraph can accommodate the addition of new graphical displays to allow the software to be customized to each user s particular environment. A new display can be developed and added to SimGraph without having to design a new application, allowing the graphics programmer to focus on the development of the graphical display. The SimGraph framework can be reused for a wide variety of visualization tasks. Although it was created for the flight simulation facilities at NASA Langley Research Center, SimGraph can be reconfigured to almost any data visualization environment. This paper describes the capabilities and operations of SimGraph.

TIGER: Turbomachinery interactive grid generation

NASA Technical Reports Server (NTRS)

Soni, Bharat K.; Shih, Ming-Hsin; Janus, J. Mark

1992-01-01

A three dimensional, interactive grid generation code, TIGER, is being developed for analysis of flows around ducted or unducted propellers. TIGER is a customized grid generator that combines new technology with methods from general grid generation codes. The code generates multiple block, structured grids around multiple blade rows with a hub and shroud for either C grid or H grid topologies. The code is intended for use with a Euler/Navier-Stokes solver also being developed, but is general enough for use with other flow solvers. TIGER features a silicon graphics interactive graphics environment that displays a pop-up window, graphics window, and text window. The geometry is read as a discrete set of points with options for several industrial standard formats and NASA standard formats. Various splines are available for defining the surface geometries. Grid generation is done either interactively or through a batch mode operation using history files from a previously generated grid. The batch mode operation can be done either with a graphical display of the interactive session or with no graphics so that the code can be run on another computer system. Run time can be significantly reduced by running on a Cray-YMP.

US National Geothermal Data System: Web feature services and system operations

NASA Astrophysics Data System (ADS)

Richard, Stephen; Clark, Ryan; Allison, M. Lee; Anderson, Arlene

2013-04-01

The US National Geothermal Data System is being developed with support from the US Department of Energy to reduce risk in geothermal energy development by providing online access to the body of geothermal data available in the US. The system is being implemented using Open Geospatial Consortium web services for catalog search (CSW), map browsing (WMS), and data access (WFS). The catalog now includes 2427 registered resources, mostly individual documents accessible via URL. 173 WMS and WFS services are registered, hosted by 4 NGDS system nodes, as well as 6 other state geological surveys. Simple feature schema for interchange formats have been developed by an informal community process in which draft content models are developed based on the information actually available in most data provider's internal datasets. A template pattern is used for the content models so that commonly used content items have the same name and data type across models. Models are documented in Excel workbooks and posted for community review with a deadline for comment; at the end of the comment period a technical working group reviews and discusses comments and votes on adoption. When adopted, an XML schema is implemented for the content model. Our approach has been to keep the focus of each interchange schema narrow, such that simple-feature (flat file) XML schema are sufficient to implement the content model. Keeping individual interchange formats simple, and allowing flexibility to introduce new content models as needed have both assisted in adoption of the service architecture. One problem that remains to be solved is that off-the-shelf server packages (GeoServer, ArcGIS server) do not permit configuration of a normative schema location to be bound with XML namespaces in instance documents. Such configuration is possible with GeoServer using a more complex deployment process. XML interchange format schema versions are indicated by the namespace URI; because of the schema location problems, namespace URIs are redirected to the normative schema location. An additional issue that needs consideration is the expected lifetime of a service instance. A service contract should be accessible online and discoverable as part of the metadata for each service instance; this contract should specify the policy for service termination process--e.g. how notification will be made, if there is an expected end-of-life date. Application developers must be aware of these lifetime limitations to avoid unexpected failures. The evolution of the the service inventory to date has been driven primarily by data providers wishing to improve access to their data holdings. Focus is currently shifting towards improving tools for data consumer interaction--search, data inspection, and download. Long term viability of the system depends on business interdependence between the data providers and data consumers.

SraTailor: graphical user interface software for processing and visualizing ChIP-seq data.

PubMed

Oki, Shinya; Maehara, Kazumitsu; Ohkawa, Yasuyuki; Meno, Chikara

2014-12-01

Raw data from ChIP-seq (chromatin immunoprecipitation combined with massively parallel DNA sequencing) experiments are deposited in public databases as SRAs (Sequence Read Archives) that are publically available to all researchers. However, to graphically visualize ChIP-seq data of interest, the corresponding SRAs must be downloaded and converted into BigWig format, a process that involves complicated command-line processing. This task requires users to possess skill with script languages and sequence data processing, a requirement that prevents a wide range of biologists from exploiting SRAs. To address these challenges, we developed SraTailor, a GUI (Graphical User Interface) software package that automatically converts an SRA into a BigWig-formatted file. Simplicity of use is one of the most notable features of SraTailor: entering an accession number of an SRA and clicking the mouse are the only steps required to obtain BigWig-formatted files and to graphically visualize the extents of reads at given loci. SraTailor is also able to make peak calls, generate files of other formats, process users' own data, and accept various command-line-like options. Therefore, this software makes ChIP-seq data fully exploitable by a wide range of biologists. SraTailor is freely available at http://www.devbio.med.kyushu-u.ac.jp/sra_tailor/, and runs on both Mac and Windows machines. © 2014 The Authors Genes to Cells © 2014 by the Molecular Biology Society of Japan and Wiley Publishing Asia Pty Ltd.

77 FR 9266 - Notice Pursuant to the National Cooperative Research and Production Act of 1993-Interchangeable...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-02-16

... Production Act of 1993--Interchangeable Virtual Instruments Foundation, Inc. Notice is hereby given that, on..., 15 U.S.C. 4301 et seq. (``the Act''), Interchangeable Virtual Instruments Foundation, Inc. has filed... Interchangeable Virtual Instruments Foundation, Inc. intends to file additional written notifications disclosing...

The Discourse of Making Amends: A Grammar of Remedial Interchanges.

ERIC Educational Resources Information Center

Walton, Marsha D.

Narrative observations were made of remedial interchanges occurring among school children (K-4) in open classrooms. Transcripts of interchanges were typed move by move and coded according to a hierarchical coding scheme (remedy, defiance, no response, relief, ending, and ambiguous). The interchanges of the kindergarteners and first graders were…

"Fiberoptic variable message signs" : Swift Interchange - Delta Park Interchange Section, Pacific Highway (Interstate 5) : final report.

DOT National Transportation Integrated Search

1995-02-01

The SYLVIA fiberoptic variable message signs (VMS) were installed on the Pacific Highway (I-5) as a part of the "Swift Interchange - Delta Park Interchange" project at milepost 298.47 and at milepost 305.66 in January 1991. Initially, during project ...

Software For Clear-Air Doppler-Radar Display

NASA Technical Reports Server (NTRS)

Johnston, Bruce W.

1990-01-01

System of software developed to present plan-position-indicator scans of clear-air Doppler radar station on color graphical cathode-ray-tube display. Designed to incorporate latest accepted standards for equipment, computer programs, and meteorological data bases. Includes use of Ada programming language, of "Graphical-Kernel-System-like" graphics interface, and of Common Doppler Radar Exchange Format. Features include portability and maintainability. Use of Ada software packages produced number of software modules reused on other related projects.

Analysis of genome rearrangement by block-interchanges.

PubMed

Lu, Chin Lung; Lin, Ying Chih; Huang, Yen Lin; Tang, Chuan Yi

2007-01-01

Block-interchanges are a new kind of genome rearrangements that affect the gene order in a chromosome by swapping two nonintersecting blocks of genes of any length. More recently, the study of such rearrangements is becoming increasingly important because of its applications in molecular evolution. Usually, this kind of study requires to solve a combinatorial problem, called the block-interchange distance problem, which is to find a minimum number of block-interchanges between two given gene orders of linear/circular chromosomes to transform one gene order into another. In this chapter, we shall introduce the basics of block-interchange rearrangements and permutation groups in algebra that are useful in analyses of genome rearrangements. In addition, we shall present a simple algorithm on the basis of permutation groups to efficiently solve the block-interchange distance problem, as well as ROBIN, a web server for the online analyses of block-interchange rearrangements.

Probabilistic reasoning under time pressure: an assessment in Italian, Spanish and English psychology undergraduates

NASA Astrophysics Data System (ADS)

Agus, M.; Hitchcott, P. K.; Penna, M. P.; Peró-Cebollero, M.; Guàrdia-Olmos, J.

2016-11-01

Many studies have investigated the features of probabilistic reasoning developed in relation to different formats of problem presentation, showing that it is affected by various individual and contextual factors. Incomplete understanding of the identity and role of these factors may explain the inconsistent evidence concerning the effect of problem presentation format. Thus, superior performance has sometimes been observed for graphically, rather than verbally, presented problems. The present study was undertaken to address this issue. Psychology undergraduates without any statistical expertise (N = 173 in Italy; N = 118 in Spain; N = 55 in England) were administered statistical problems in two formats (verbal-numerical and graphical-pictorial) under a condition of time pressure. Students also completed additional measures indexing several potentially relevant individual dimensions (statistical ability, statistical anxiety, attitudes towards statistics and confidence). Interestingly, a facilitatory effect of graphical presentation was observed in the Italian and Spanish samples but not in the English one. Significantly, the individual dimensions predicting statistical performance also differed between the samples, highlighting a different role of confidence. Hence, these findings confirm previous observations concerning problem presentation format while simultaneously highlighting the importance of individual dimensions.

76 FR 80405 - Notice Pursuant to the National Cooperative Research and Production Act of 1993-Interchangeable...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-12-23

... Production Act of 1993--Interchangeable Virtual Instruments Foundation, Inc. Notice is hereby given that, on..., 15 U.S.C. 4301 et seq. (``the Act''), Interchangeable Virtual Instruments Foundation, Inc. has filed... in this group research project remains open, and Interchangeable Virtual Instruments Foundation, Inc...

78 FR 117 - Notice Pursuant to the National Cooperative Research and Production Act of 1993-Interchangeable...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-01-02

... Production Act of 1993--Interchangeable Virtual Instruments Foundation, Inc. Notice is hereby given that, on..., 15 U.S.C. 4301 et seq. (``the Act''), Interchangeable Virtual Instruments Foundation, Inc. has filed... research project. Membership in this group research project remains open, and Interchangeable Virtual...

76 FR 29267 - Notice Pursuant to the National Cooperative Research and Production Act of 1993-Interchangeable...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-05-20

... Production Act of 1993--Interchangeable Virtual Instruments Foundation, Inc. Notice is hereby given that, on..., 15 U.S.C. 4301 et seq. (``the Act''), Interchangeable Virtual Instruments Foundation, Inc. has filed... in this group research project remains open, and Interchangeable Virtual Instruments Foundation, Inc...

75 FR 28294 - Notice Pursuant to the National Cooperative Research and Production Act of 1993-Interchangeable...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-05-20

... Production Act of 1993--Interchangeable Virtual Instruments Foundation, Inc. Notice is hereby given that, on..., 15 U.S.C. 4301 et seq. (``the Act''), Interchangeable Virtual Instruments Foundation, Inc. has filed... remains open, and Interchangeable Virtual Instruments Foundation, Inc. intends to file additional written...

76 FR 16820 - Notice Pursuant to the National Cooperative Research and Production Act of 1993-Interchangeable...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-03-25

... Production Act of 1993--Interchangeable Virtual Instruments Foundation, Inc. Notice is hereby given that, on..., 15 U.S.C. 4301 et seq. (``the Act''), Interchangeable Virtual Instruments Foundation, Inc. has filed... research project. Membership in this group research project remains open, and Interchangeable Virtual...

75 FR 54652 - Notice Pursuant to the National Cooperative Research and Production Act of 1993-Interchangeable...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-09-08

... Production Act of 1993--Interchangeable Virtual Instruments Foundation, Inc. Notice is hereby given that, on..., 15 U.S.C. 4301 et seq. (``the Act''), Interchangeable Virtual Instruments Foundation, Inc. has filed... group research project remains open, and Interchangeable Virtual Instruments Foundation, Inc. intends to...

32 CFR 644.409 - Procedures for Interchange of National Forest Lands.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 32 National Defense 4 2010-07-01 2010-07-01 true Procedures for Interchange of National Forest... Interests § 644.409 Procedures for Interchange of National Forest Lands. (a) General. The interchange of national forest lands is accomplished in three steps: first, agreement must be reached between the two...

The Effects of Iconic Presentation on Individuals

DTIC Science & Technology

1992-09-01

attitudes (Davis, 1981; Lusk and Dersnick, 1979; Robey, 1983; Zmud, Blocher, and Moffie , 1983). Davis (1981) performed a study based on the Myers-Briggs...Cheshire CT: Graphics Press, 1983. Zmud, R. W., E. Blocher, and R. P. Moffie . "The Impact of Color Graphic Report Formats on Decision Performance and

Assessing Teachers' Competencies to Read and Interpret Graphs from Learning Progress Assessment: Results from Tests and Interviews

ERIC Educational Resources Information Center

Zeuch, Nina; Förster, Natalie; Souvignier, Elmar

2017-01-01

Learning progress assessment (LPA) provides formative information about effectiveness of instructional decisions. Learning curves are usually presented as graphical illustrations. However, little is known about teachers understanding and interpreting of graphically presented information. An instrument to measure competencies in reading graphs from…

Effect of therapeutic interchange on medication reconciliation during hospitalization and upon discharge in a geriatric population

PubMed Central

Wang, Jessica S.; Fogerty, Robert L.

2017-01-01

Background Therapeutic interchange of a same class medication for an outpatient medication is a widespread practice during hospitalization in response to limited hospital formularies. However, therapeutic interchange may increase risk of medication errors. The objective was to characterize the prevalence and safety of therapeutic interchange. Methods and findings Secondary analysis of a transitions of care study. We included patients over age 64 admitted to a tertiary care hospital between 2009–2010 with heart failure, pneumonia, or acute coronary syndrome who were taking a medication in any of six commonly-interchanged classes on admission: proton pump inhibitors (PPIs), histamine H2-receptor antagonists (H2 blockers), hydroxymethylglutaryl CoA reductase inhibitors (statins), angiotensin-converting enzyme (ACE) inhibitors, angiotensin receptor blockers (ARBs), and inhaled corticosteroids (ICS). There was limited electronic medication reconciliation support available. Main measures were presence and accuracy of therapeutic interchange during hospitalization, and rate of medication reconciliation errors on discharge. We examined charts of 303 patients taking 555 medications at time of admission in the six medication classes of interest. A total of 244 (44.0%) of medications were therapeutically interchanged to an approved formulary drug at admission, affecting 64% of the study patients. Among the therapeutically interchanged drugs, we identified 78 (32.0%) suspected medication conversion errors. The discharge medication reconciliation error rate was 11.5% among the 244 therapeutically interchanged medications, compared with 4.2% among the 311 unchanged medications (relative risk [RR] 2.75, 95% confidence interval [CI] 1.45–5.19). Conclusions Therapeutic interchange was prevalent among hospitalized patients in this study and elevates the risk for potential medication errors during and after hospitalization. Improved electronic systems for managing therapeutic interchange and medication reconciliation may be valuable. PMID:29049325

A compact ultra-clean system for deploying radioactive sources inside the KamLAND detector

NASA Astrophysics Data System (ADS)

Banks, T. I.; Freedman, S. J.; Wallig, J.; Ybarrolaza, N.; Gando, A.; Gando, Y.; Ikeda, H.; Inoue, K.; Kishimoto, Y.; Koga, M.; Mitsui, T.; Nakamura, K.; Shimizu, I.; Shirai, J.; Suzuki, A.; Takemoto, Y.; Tamae, K.; Ueshima, K.; Watanabe, H.; Xu, B. D.; Yoshida, H.; Yoshida, S.; Kozlov, A.; Grant, C.; Keefer, G.; Piepke, A.; Bloxham, T.; Fujikawa, B. K.; Han, K.; Ichimura, K.; Murayama, H.; O`Donnell, T.; Steiner, H. M.; Winslow, L. A.; Dwyer, D. A.; McKeown, R. D.; Zhang, C.; Berger, B. E.; Lane, C. E.; Maricic, J.; Miletic, T.; Batygov, M.; Learned, J. G.; Matsuno, S.; Sakai, M.; Horton-Smith, G. A.; Downum, K. E.; Gratta, G.; Efremenko, Y.; Perevozchikov, O.; Karwowski, H. J.; Markoff, D. M.; Tornow, W.; Heeger, K. M.; Detwiler, J. A.; Enomoto, S.; Decowski, M. P.

2015-01-01

We describe a compact, ultra-clean device used to deploy radioactive sources along the vertical axis of the KamLAND liquid-scintillator neutrino detector for purposes of calibration. The device worked by paying out and reeling in precise lengths of a hanging, small-gauge wire rope (cable); an assortment of interchangeable radioactive sources could be attached to a weight at the end of the cable. All components exposed to the radiopure liquid scintillator were made of chemically compatible UHV-cleaned materials, primarily stainless steel, in order to avoid contaminating or degrading the scintillator. To prevent radon intrusion, the apparatus was enclosed in a hermetically sealed housing inside a glove box, and both volumes were regularly flushed with purified nitrogen gas. An infrared camera attached to the side of the housing permitted real-time visual monitoring of the cable's motion, and the system was controlled via a graphical user interface.

Topological Anisotropy of Stone-Wales Waves in Graphenic Fragments

PubMed Central

Ori, Ottorino; Cataldo, Franco; Putz, Mihai V.

2011-01-01

Stone-Wales operators interchange four adjacent hexagons with two pentagon-heptagon 5|7 pairs that, graphically, may be iteratively propagated in the graphene layer, originating a new interesting structural defect called here Stone-Wales wave. By minimization, the Wiener index topological invariant evidences a marked anisotropy of the Stone-Wales defects that, topologically, are in fact preferably generated and propagated along the diagonal of the graphenic fragments, including carbon nanotubes and graphene nanoribbons. This peculiar edge-effect is shown in this paper having a predominant topological origin, leaving to future experimental investigations the task of verifying the occurrence in nature of wave-like defects similar to the ones proposed here. Graph-theoretical tools used in this paper for the generation and the propagation of the Stone-Wales defects waves are applicable to investigate isomeric modifications of chemical structures with various dimensionality like fullerenes, nanotubes, graphenic layers, schwarzites, zeolites. PMID:22174641

Presenting risk information to people with diabetes: evaluating effects and preferences for different formats by a web-based randomised controlled trial.

PubMed

Edwards, Adrian; Thomas, Richard; Williams, Rhys; Ellner, Andrew L; Brown, Polly; Elwyn, Glyn

2006-11-01

Web-based patient information is widespread and information on the benefits and risks of treatments is often difficult to understand. We therefore evaluated different risk presentation formats - numerical, graphical and others - addressing the pros and cons of tight control versus usual treatment approaches for diabetes. Randomised controlled trial. Online. Publicity disseminated via Diabetes UK. People with diabetes or their carers. Control group information based on British Medical Journal 'Best Treatments'. Four intervention groups received enhanced information resources: (1) detailed numerical information (absolute/relative risk, numbers-needed-to-treat); (2) 'anchoring' to familiar risks or descriptions; (3) graphical (bar charts, thermometer scales, crowd figure formats); (4) combination of 1-3. Decision conflict scale (DCS, a measure of uncertainty); satisfaction with information; further free text responses for qualitative content analysis. Seven hundred and ten people visited the website and were randomised. Five hundred and eight completed the questionnaire for quantitative data. Mean DCS scores ranged from 2.12 to 2.24 for the five randomisation groups, indicating neither clear delay or vacillation about decisions (usually DCS>2.5) nor tending to make decisions (usually DCS<2.0). There were no statistically significant effects of the interventions on DCS, or satisfaction with information. Two hundred and fifty-six participants provided responses for qualitative analysis: most found graphical representations helpful, specifically bar chart formats; many found other graphic formats (thermometer style, crowd figures/smiley faces) and 'anchoring' information unhelpful, and indicated information overload. Many negative experiences with healthcare indicate a challenging context for effective information provision and decision support. Online evaluation of different risk representation formats was feasible. There was a lack of intervention effects on quantitative outcomes, perhaps reflecting already well-informed participants from the Diabetes UK patient organisation. The large qualitative dataset included many comments about what participants found helpful as formats for communicating risk information. These findings assist the design of online decision aids and the representation of risk information. The challenge is to provide more information, in appropriate and clear formats, but without risking information overload. Interactive web designs hold much promise to achieve this.

Writing a Scientific Paper II. Communication by Graphics

NASA Astrophysics Data System (ADS)

Sterken, C.

2011-07-01

This paper discusses facets of visual communication by way of images, graphs, diagrams and tabular material. Design types and elements of graphical images are presented, along with advice on how to create graphs, and on how to read graphical illustrations. This is done in astronomical context, using case studies and historical examples of good and bad graphics. Design types of graphs (scatter and vector plots, histograms, pie charts, ternary diagrams and three-dimensional surface graphs) are explicated, as well as the major components of graphical images (axes, legends, textual parts, etc.). The basic features of computer graphics (image resolution, vector images, bitmaps, graphical file formats and file conversions) are explained, as well as concepts of color models and of color spaces (with emphasis on aspects of readability of color graphics by viewers suffering from color-vision deficiencies). Special attention is given to the verity of graphical content, and to misrepresentations and errors in graphics and associated basic statistics. Dangers of dot joining and curve fitting are discussed, with emphasis on the perception of linearity, the issue of nonsense correlations, and the handling of outliers. Finally, the distinction between data, fits and models is illustrated.

An automated graphics tool for comparative genomics: the Coulson plot generator

PubMed Central

2013-01-01

Background Comparative analysis is an essential component to biology. When applied to genomics for example, analysis may require comparisons between the predicted presence and absence of genes in a group of genomes under consideration. Frequently, genes can be grouped into small categories based on functional criteria, for example membership of a multimeric complex, participation in a metabolic or signaling pathway or shared sequence features and/or paralogy. These patterns of retention and loss are highly informative for the prediction of function, and hence possible biological context, and can provide great insights into the evolutionary history of cellular functions. However, representation of such information in a standard spreadsheet is a poor visual means from which to extract patterns within a dataset. Results We devised the Coulson Plot, a new graphical representation that exploits a matrix of pie charts to display comparative genomics data. Each pie is used to describe a complex or process from a separate taxon, and is divided into sectors corresponding to the number of proteins (subunits) in a complex/process. The predicted presence or absence of proteins in each complex are delineated by occupancy of a given sector; this format is visually highly accessible and makes pattern recognition rapid and reliable. A key to the identity of each subunit, plus hierarchical naming of taxa and coloring are included. A java-based application, the Coulson plot generator (CPG) automates graphic production, with a tab or comma-delineated text file as input and generating an editable portable document format or svg file. Conclusions CPG software may be used to rapidly convert spreadsheet data to a graphical matrix pie chart format. The representation essentially retains all of the information from the spreadsheet but presents a graphically rich format making comparisons and identification of patterns significantly clearer. While the Coulson plot format is highly useful in comparative genomics, its original purpose, the software can be used to visualize any dataset where entity occupancy is compared between different classes. Availability CPG software is available at sourceforge http://sourceforge.net/projects/coulson and http://dl.dropbox.com/u/6701906/Web/Sites/Labsite/CPG.html PMID:23621955

Assessment of interchangeability rate between 2 methods of measurements: An example with a cardiac output comparison study.

PubMed

Lorne, Emmanuel; Diouf, Momar; de Wilde, Robert B P; Fischer, Marc-Olivier

2018-02-01

The Bland-Altman (BA) and percentage error (PE) methods have been previously described to assess the agreement between 2 methods of medical or laboratory measurements. This type of approach raises several problems: the BA methodology constitutes a subjective approach to interchangeability, whereas the PE approach does not take into account the distribution of values over a range. We describe a new methodology that defines an interchangeability rate between 2 methods of measurement and cutoff values that determine the range of interchangeable values. We used a simulated data and a previously published data set to demonstrate the concept of the method. The interchangeability rate of 5 different cardiac output (CO) pulse contour techniques (Wesseling method, LiDCO, PiCCO, Hemac method, and Modelflow) was calculated, in comparison with the reference pulmonary artery thermodilution CO using our new method. In our example, Modelflow with a good interchangeability rate of 93% and a cutoff value of 4.8 L min, was found to be interchangeable with the thermodilution method for >95% of measurements. Modelflow had a higher interchangeability rate compared to Hemac (93% vs 86%; P = .022) or other monitors (Wesseling cZ = 76%, LiDCO = 73%, and PiCCO = 62%; P < .0001). Simulated data and reanalysis of a data set comparing 5 CO monitors against thermodilution CO showed that, depending on the repeatability of the reference method, the interchangeability rate combined with a cutoff value could be used to define the range of values over which interchangeability remains acceptable.

apART: system for the acquisition, processing, archiving, and retrieval of digital images in an open, distributed imaging environment

NASA Astrophysics Data System (ADS)

Schneider, Uwe; Strack, Ruediger

1992-04-01

apART reflects the structure of an open, distributed environment. According to the general trend in the area of imaging, network-capable, general purpose workstations with capabilities of open system image communication and image input are used. Several heterogeneous components like CCD cameras, slide scanners, and image archives can be accessed. The system is driven by an object-oriented user interface where devices (image sources and destinations), operators (derived from a commercial image processing library), and images (of different data types) are managed and presented uniformly to the user. Browsing mechanisms are used to traverse devices, operators, and images. An audit trail mechanism is offered to record interactive operations on low-resolution image derivatives. These operations are processed off-line on the original image. Thus, the processing of extremely high-resolution raster images is possible, and the performance of resolution dependent operations is enhanced significantly during interaction. An object-oriented database system (APRIL), which can be browsed, is integrated into the system. Attribute retrieval is supported by the user interface. Other essential features of the system include: implementation on top of the X Window System (X11R4) and the OSF/Motif widget set; a SUN4 general purpose workstation, inclusive ethernet, magneto optical disc, etc., as the hardware platform for the user interface; complete graphical-interactive parametrization of all operators; support of different image interchange formats (GIF, TIFF, IIF, etc.); consideration of current IPI standard activities within ISO/IEC for further refinement and extensions.

Vertical navigation displays : pilot performance and workload during simulated constant-angle-of-descent GPS approaches

DOT National Transportation Integrated Search

2000-03-26

This study compared the effect of alternative graphic or : numeric cockpit display formats on the tactical aspects of : vertical navigation (VNAV). Display formats included: : a) a moving map with altitude range arc, b) the same : format, supplemente...

Text and graphics: manipulating nutrition brochures to maximize recall.

PubMed

Clark, K L; AbuSabha, R; von Eye, A; Achterberg, C

1999-08-01

This study examined how altering text and graphics of a nutrition brochure could affect the ability to remember the content of the message. Two theoretical models were used to guide alterations: dual-coding theory and the communications model. Three brochure formats were tested: the original brochure containing abstract text and abstract graphics, a modified brochure with relatively concrete text and abstract graphics, and a relatively concrete text brochure with concrete graphics. Participants (N = 239 women) were divided into four age groups: 20-30, 40-50, 60-70 and over 70 years. Women were randomly assigned into each of the three experimental brochure formats or a control group. Participants completed recalled materials from the assigned brochures (the no treatment control group did not include a brochure) at two different sessions, 30 days apart. Data were content analyzed and results were compared using analysis of covariance to test differences by age and brochure types. Younger women (20-30 and 40-50 years) recalled more information than women over 60 years. More concrete nutrition education print materials enhanced recall of information presented immediately after reading the material; however, this effect was transient and lasted less than 30 days after a one-time reading. The implications of these data for communicating nutrition messages with print materials are discussed.

MARINE NEWS - GRIDDED and VECTOR DATA

Science.gov Websites

Great Lakes. Experimental gridded data and graphical imagery is now routinely produced at most WFOs. It gusts; weather; and wave height by December 2004. Gridded forecasts from the other non-continental U.S (PNG) format. Links to NDFD Data: Example of NDFD Graphical Imagery (experimental) NDFD GRIB2 data via

The Effectiveness of Using Interactive Multimedia in Improving the Concept of Fashion Design and Its Application in The Making of Digital Fashion Design

NASA Astrophysics Data System (ADS)

Wiana, W.

2018-02-01

This research is related to the effort to design a more representative learning system to improve the learning result of digital fashion design, through the development of interactive multimedia based on motion graphic. This research is aimed to know the effect of interactive multimedia application based on motion graphic to increase the mastery of the concept and skill of the students to making fashion designing in digital format. The research method used is quasi experiment with research design of Non-equivalent Control Group Design. The lectures are conducted in two different classes, namely class A as the Experimental Class and class B as the Control Class. From the calculation result after interpreted using Normalize Gain, there is an increase of higher learning result in student with interactive learning based on motion graphic, compared with student achievement on conventional learning. In this research, interactive multimedia learning based on motion graphic is effective toward the improvement of student learning in concept mastering indicator and on the aspect of making fashion design in digital format.

Review of nutrition labeling formats.

PubMed

Geiger, C J; Wyse, B W; Parent, C R; Hansen, R G

1991-07-01

This article examines nutrition labeling history as well as the findings of nine research studies of nutrition labeling formats. Nutrition labeling regulations were announced in 1973 and have been periodically amended since then. In response to requests from consumers and health care professionals for revision of the labeling system, the Food and Drug Administration initiated a three-phase plan for reform of nutrition labeling in 1990. President Bush signed the Nutrition Labeling and Education Act in November 1990. Literature analysis revealed that only nine studies with an experimental design have focused on nutrition labeling since 1971. Four were conducted before 1975, which was the year that nutrition labeling was officially implemented, two were conducted in 1980, and three were conducted after 1986. Only two of the nine studies supported the traditional label format mandated by the Code of Federal Regulations, and one study partially supported it. Four of the nine studies that evaluated graphic presentations of nutrition information found that consumer comprehension of nutrition information was improved with a graphic format for nutrition labeling: three studies supported the use of bar graphs and one study supported the use of a pie chart. Full disclosure (ie, complete nutrient and ingredient labeling) was preferred by consumers in two of the three studies that examined this variable. The third study supported three types of information disclosure dependent upon socioeconomic class. In those studies that tested graphics, a bar graph format was significantly preferred and showed better consumer comprehension than the traditional format.

A Solution to Metadata: Using XML Transformations to Automate Metadata

DTIC Science & Technology

2010-06-01

developed their own metadata standards—Directory Interchange Format (DIF), Ecological Metadata Language ( EML ), and International Organization for...mented all their data using the EML standard. However, when later attempting to publish to a data clearinghouse— such as the Geospatial One-Stop (GOS...construct calls to its transform(s) method by providing the type of the incoming content (e.g., eml ), the type of the resulting content (e.g., fgdc) and

Animation graphic interface for the space shuttle onboard computer

NASA Technical Reports Server (NTRS)

Wike, Jeffrey; Griffith, Paul

1989-01-01

Graphics interfaces designed to operate on space qualified hardware challenge software designers to display complex information under processing power and physical size constraints. Under contract to Johnson Space Center, MICROEXPERT Systems is currently constructing an intelligent interface for the LASER DOCKING SENSOR (LDS) flight experiment. Part of this interface is a graphic animation display for Rendezvous and Proximity Operations. The displays have been designed in consultation with Shuttle astronauts. The displays show multiple views of a satellite relative to the shuttle, coupled with numeric attitude information. The graphics are generated using position data received by the Shuttle Payload and General Support Computer (PGSC) from the Laser Docking Sensor. Some of the design considerations include crew member preferences in graphic data representation, single versus multiple window displays, mission tailoring of graphic displays, realistic 3D images versus generic icon representations of real objects, the physical relationship of the observers to the graphic display, how numeric or textual information should interface with graphic data, in what frame of reference objects should be portrayed, recognizing conditions of display information-overload, and screen format and placement consistency.

75 FR 62919 - Notice of Final Federal Agency Actions on the Route 250 Bypass Interchange at McIntire Road...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-10-13

... on the Route 250 Bypass Interchange at McIntire Road Project in Virginia AGENCY: Federal Highway.... 139(l)(1). The actions relate to the Route 250 Bypass Interchange at McIntire Road project in the City... Virginia: Route 250 Bypass Interchange at McIntire Road. The project would involve construction of a grade...

Financing mechanisms for capital improvements : interchanges : final report.

DOT National Transportation Integrated Search

2010-03-01

This report examines the use of alternative local financing mechanisms for interchange and interchange area infrastructure improvements. The financing mechanisms covered include transportation impact fees, tax increment financing, value capture finan...

Effects of geometric characteristics of interchanges on truck safety

DOT National Transportation Integrated Search

1999-01-18

Relationships between truck accidents and selected geometric characteristics of interchanges are examined. Datasets containing information on truck accident at interchanges, traffic exposure and selected geometric characteristics are analyzed with an...

Safety analysis of interchanges

DOT National Transportation Integrated Search

2007-06-01

The objectives of this research are to synthesize the current state of knowledge concerning the safety assessment of new or modified interchanges; develop a spreadsheet-based computational tool for performing safety assessments of interchanges; and i...

Financing mechanisms for capital improvements : interchanges, final report, March 2010.

DOT National Transportation Integrated Search

2010-03-01

This report examines the use of alternative local financing mechanisms for interchange and interchange area infrastructure improvements. The financing mechanisms covered include transportation impact fees, tax increment financing, value capture finan...

Diverging diamond interchange performance evaluation (I-44 and Route 13)

DOT National Transportation Integrated Search

2011-02-01

Performance evaluation was conducted on the first diverging diamond interchange (DDI) or double : crossover interchange (DCD) constructed in the United States. This evaluation assessed traffic operations, safety and : public perceptions t...

DAM - detection and mapping

NASA Technical Reports Server (NTRS)

1977-01-01

Integrated set of manual procedures, computer programs, and graphic devices processes multispectral scanner data from orbiting Landsat into precisely registered and formatted maps of surface water and other resources at variety of scales, sheet formats, and tick intervals.

Flight Deck Data Link Displays: An Evaluation of Textual and Graphical Implementations

NASA Technical Reports Server (NTRS)

McGann, Alison; Lozito, Sandy; Corker, Kevin; Ashford, Rose (Technical Monitor)

2001-01-01

In Experiment 1, 16 pilots participated in a part-task simulation study that evaluated pilot data link communication for short and long message types and for two textual formats. No differences were found between the two textual formats when evaluating data link transaction times and pilot performance on a secondary task. Pilots initiated flight changes more quickly with the T-Scan format, where location of clearance information roughly corresponded to the cockpit instrument layout. Longer messages were less problematic than two short messages sent in close succession as pilots required more verbal clarification for closely spaced messages. 24 pilots participated in a second experiment that evaluated pilot communication performance for textual data link, two implementations of graphical data link, and a combined graphical and textual information modality. The two modalities incorporating text resulted in significantly faster transaction times and better performance on the secondary task than the two graphical-only implementations. The interval between messages was also more systematically varied in Experiment 2, and a short interval between messages significantly increased the access time for the second message. This delay in access was long enough to increase significantly the total transaction time of the second message, and this effect was exaggerated for the graphical-only implementations. Time to view the message before acknowledgement and time to initiate flight changes were not affected by the interval manipulation, This suggests that pilots adopt a sequential message handling strategy, and presenting messages closely in succession may present operational problems in a data link Air Traffic Control (ATC) environment. The results of this study also indicate that the perceived importance of message content is currently a crucial element in pilot data link communication.

Graphic Grown Up

ERIC Educational Resources Information Center

Kim, Ann

2009-01-01

It's no secret that children and YAs are clued in to graphic novels (GNs) and that comics-loving adults are positively giddy that this format is getting the recognition it deserves. Still, there is a whole swath of library card-carrying grown-up readers out there with no idea where to start. Splashy movies such as "300" and "Spider-Man" and their…

Case study - human body relay race.

PubMed

Lewis, Heather

2017-04-01

This case presentation introduces the work of Heather Lewis, Graphic Designer from Birmingham Community Healthcare Foundation Trust, Clinical Illustration department. The graphic design team offer professional design solutions in a variety of formats such as scientific posters, banners, patient information booklets and promotional items. This particular project was requested by the Combined Community Dental Service, a Specialist Division in Birmingham.

Feel the Fear: Learning Graphic Design in Affective Places and Online Spaces

ERIC Educational Resources Information Center

Nottingham, Anitra

2017-01-01

This article explores the idea of pedagogic affect in both onsite and online graphic design learning spaces, and speculates on the role that this affect plays in the formation of the design student. I argue that embodied design knowledge is built by interactions with design professionals, activities that mimic the daily work of designers, and…

Data display and analysis with μView

NASA Astrophysics Data System (ADS)

Tucakov, Ivan; Cosman, Jacob; Brewer, Jess H.

2006-03-01

The μView utility is a new Java applet version of the old db program, extended to include direct access to MUD data files, from which it can construct a variety of spectrum types, including complex and RRF-transformed spectra. By using graphics features built into all modern Web browsers, it provides full graphical display capabilities consistently across all platforms. It has the full command-line functionality of db as well as a more intuitive graphical user interface and extensive documentation, and can read and write db, csv and XML format files.

Communicating risk information: the influence of graphical display format on quantitative information perception-Accuracy, comprehension and preferences.

PubMed

Price, Melanie; Cameron, Rachel; Butow, Phyllis

2007-12-01

Statistical health risk information has proved notoriously confusing and difficult to understand. While past research indicates that presenting risk information in a frequency format is superior to relative risk and probability formats, the optimal characteristics of frequency formats are still unclear. The aim of this study is to determine the features of 1000 person frequency diagrams (pictographs) which result in the greatest speed and accuracy of graphical perception. Participants estimated the difference in chance of survival when taking or not taking Drug A, on a pictograph format, varying by mode (one-graph/two-graph), direction (vertical/horizontal), and shading (shaded/unshaded), and their preferences for the different formats. Their understanding of different components of the 1000 person diagram was assessed. Responses were timed and scored for accuracy. Horizontal pictographs were perceived faster and more accurately than vertical formats. Two-graph pictographs were perceived faster than one-graph formats. Shading reduced response time in two-graph formats, but increased response times in one-graph formats. Shaded and one-graph pictographs were preferred. As shading and one-graph formats were preferred, further clarification as to why shading negatively impacts on response times in the one-graph format is warranted. Horizontal pictographs are optimal.

Driver Expectations When Navigating Complex Interchanges

DOT National Transportation Integrated Search

2013-10-01

The purpose of this project was to develop a method for determining driver expectations at interchanges and to use that method to determine how these expectations affect driver behavior at interchanges that vary in level of complexity, including prov...

Uncertainty-based Estimation of the Secure Range for ISO New England Dynamic Interchange Adjustment

DOE Office of Scientific and Technical Information (OSTI.GOV)

Etingov, Pavel V.; Makarov, Yuri V.; Wu, Di

2014-04-14

The paper proposes an approach to estimate the secure range for dynamic interchange adjustment, which assists system operators in scheduling the interchange with neighboring control areas. Uncertainties associated with various sources are incorporated. The proposed method is implemented in the dynamic interchange adjustment (DINA) tool developed by Pacific Northwest National Laboratory (PNNL) for ISO New England. Simulation results are used to validate the effectiveness of the proposed method.

Issues in formulary management: therapeutic interchange. The value, cost, and quality of therapeutic interchange.

PubMed

Mahoney, C D

1992-10-01

Therapeutic interchange is a process of substituting a prescribed medication with one that offers therapeutic and cost benefits. The practice not only provides short-term savings but also is associated with decreases in lengths of stay in hospitals and total hospital drug expenses. There may be medicolegal implications when FDA-approved indications differ for interchanged drugs. The potential for liability is decreased when a standard of care is met, but since standards can change, guidelines should be reviewed regularly. High-tech, high-cost drugs are sometimes appropriate for therapeutic interchange. Pharmacy and therapeutics committees should assure best value by considering indirect expenses, quality, and therapeutic outcome, as well as product cost. Therapeutic interchange programs enable pharmacy managers to neutralize or at least slow the rate of drug cost increases, ensuring appropriate utilization of resources and more favorable patient outcomes.

Electronic Data Interchange in Defense Transportation

DTIC Science & Technology

1987-10-01

entry into a nearly paperless transportation environment. • Prescribe DoD’s use of the EDI standards developed by the transportation industry and lead...information into a format for internal use so that it can be processed. * Key Entry Costs. Data will no longer need to be entered manually into a terminal or...that commercial standards cannot meet, DoD must create standards. A vehicle for creating those DoD-unique standards now exists. That vehicle , the

Microscopic information processing and communication in crowd dynamics

NASA Astrophysics Data System (ADS)

Henein, Colin Marc; White, Tony

2010-11-01

Due, perhaps, to the historical division of crowd dynamics research into psychological and engineering approaches, microscopic crowd models have tended toward modelling simple interchangeable particles with an emphasis on the simulation of physical factors. Despite the fact that people have complex (non-panic) behaviours in crowd disasters, important human factors in crowd dynamics such as information discovery and processing, changing goals and communication have not yet been well integrated at the microscopic level. We use our Microscopic Human Factors methodology to fuse a microscopic simulation of these human factors with a popular microscopic crowd model. By tightly integrating human factors with the existing model we can study the effects on the physical domain (movement, force and crowd safety) when human behaviour (information processing and communication) is introduced. In a large-room egress scenario with ample exits, information discovery and processing yields a crowd of non-interchangeable individuals who, despite close proximity, have different goals due to their different beliefs. This crowd heterogeneity leads to complex inter-particle interactions such as jamming transitions in open space; at high crowd energies, we found a freezing by heating effect (reminiscent of the disaster at Central Lenin Stadium in 1982) in which a barrier formation of naïve individuals trying to reach blocked exits prevented knowledgeable ones from exiting. Communication, when introduced, reduced this barrier formation, increasing both exit rates and crowd safety.

KMWin--a convenient tool for graphical presentation of results from Kaplan-Meier survival time analysis.

PubMed

Gross, Arnd; Ziepert, Marita; Scholz, Markus

2012-01-01

Analysis of clinical studies often necessitates multiple graphical representations of the results. Many professional software packages are available for this purpose. Most packages are either only commercially available or hard to use especially if one aims to generate or customize a huge number of similar graphical outputs. We developed a new, freely available software tool called KMWin (Kaplan-Meier for Windows) facilitating Kaplan-Meier survival time analysis. KMWin is based on the statistical software environment R and provides an easy to use graphical interface. Survival time data can be supplied as SPSS (sav), SAS export (xpt) or text file (dat), which is also a common export format of other applications such as Excel. Figures can directly be exported in any graphical file format supported by R. On the basis of a working example, we demonstrate how to use KMWin and present its main functions. We show how to control the interface, customize the graphical output, and analyse survival time data. A number of comparisons are performed between KMWin and SPSS regarding graphical output, statistical output, data management and development. Although the general functionality of SPSS is larger, KMWin comprises a number of features useful for survival time analysis in clinical trials and other applications. These are for example number of cases and number of cases under risk within the figure or provision of a queue system for repetitive analyses of updated data sets. Moreover, major adjustments of graphical settings can be performed easily on a single window. We conclude that our tool is well suited and convenient for repetitive analyses of survival time data. It can be used by non-statisticians and provides often used functions as well as functions which are not supplied by standard software packages. The software is routinely applied in several clinical study groups.

KMWin – A Convenient Tool for Graphical Presentation of Results from Kaplan-Meier Survival Time Analysis

PubMed Central

Gross, Arnd; Ziepert, Marita; Scholz, Markus

2012-01-01

Background Analysis of clinical studies often necessitates multiple graphical representations of the results. Many professional software packages are available for this purpose. Most packages are either only commercially available or hard to use especially if one aims to generate or customize a huge number of similar graphical outputs. We developed a new, freely available software tool called KMWin (Kaplan-Meier for Windows) facilitating Kaplan-Meier survival time analysis. KMWin is based on the statistical software environment R and provides an easy to use graphical interface. Survival time data can be supplied as SPSS (sav), SAS export (xpt) or text file (dat), which is also a common export format of other applications such as Excel. Figures can directly be exported in any graphical file format supported by R. Results On the basis of a working example, we demonstrate how to use KMWin and present its main functions. We show how to control the interface, customize the graphical output, and analyse survival time data. A number of comparisons are performed between KMWin and SPSS regarding graphical output, statistical output, data management and development. Although the general functionality of SPSS is larger, KMWin comprises a number of features useful for survival time analysis in clinical trials and other applications. These are for example number of cases and number of cases under risk within the figure or provision of a queue system for repetitive analyses of updated data sets. Moreover, major adjustments of graphical settings can be performed easily on a single window. Conclusions We conclude that our tool is well suited and convenient for repetitive analyses of survival time data. It can be used by non-statisticians and provides often used functions as well as functions which are not supplied by standard software packages. The software is routinely applied in several clinical study groups. PMID:22723912

Development of performance matrices for evaluating innovative intersections and interchanges.

DOT National Transportation Integrated Search

2015-09-01

Innovative intersections and interchanges, primarily Continuous Flow Intersection (CFI) and Diverging Diamond : Interchange (DDI), have seen an increase in numbers in the State of Utah over the past several years, making Utah a : leader in the countr...

ART-ML - a novel XML format for the biological procedures modeling and the representation of blood flow simulation.

PubMed

Karvounis, E C; Tsakanikas, V D; Fotiou, E; Fotiadis, D I

2010-01-01

The paper proposes a novel Extensible Markup Language (XML) based format called ART-ML that aims at supporting the interoperability and the reuse of models of blood flow, mass transport and plaque formation, exported by ARTool. ARTool is a platform for the automatic processing of various image modalities of coronary and carotid arteries. The images and their content are fused to develop morphological models of the arteries in easy to handle 3D representations. The platform incorporates efficient algorithms which are able to perform blood flow simulation. In addition atherosclerotic plaque development is estimated taking into account morphological, flow and genetic factors. ART-ML provides a XML format that enables the representation and management of embedded models within the ARTool platform and the storage and interchange of well-defined information. This approach influences in the model creation, model exchange, model reuse and result evaluation.

Interchange mode excited by trapped energetic ions

DOE Office of Scientific and Technical Information (OSTI.GOV)

Nishimura, Seiya, E-mail: n-seiya@kobe-kosen.ac.jp

2015-07-15

The kinetic energy principle describing the interaction between ideal magnetohydrodynamic (MHD) modes with trapped energetic ions is revised. A model is proposed on the basis of the reduced ideal MHD equations for background plasmas and the bounce-averaged drift-kinetic equation for trapped energetic ions. The model is applicable to large-aspect-ratio toroidal devices. Specifically, the effect of trapped energetic ions on the interchange mode in helical systems is analyzed. Results show that the interchange mode is excited by trapped energetic ions, even if the equilibrium states are stable to the ideal interchange mode. The energetic-ion-induced branch of the interchange mode might bemore » associated with the fishbone mode in helical systems.« less

Heads Up

MedlinePlus

... HEADS UP Resources Training Custom PDFs Mobile Apps Videos Graphics Podcasts Social Media File Formats Help: How do I view different file formats (PDF, DOC, PPT, MPEG) on this site? Adobe PDF file Microsoft PowerPoint ... file Apple Quicktime file RealPlayer file Text file ...

78 FR 17431 - Antitrust Division

Federal Register 2010, 2011, 2012, 2013, 2014

2013-03-21

... Production Act of 1993--Interchangeable Virtual Instruments Foundation, Inc. Notice is hereby given that, on..., 15 U.S.C. 4301 et seq. (``the Act''), Interchangeable Virtual Instruments Foundation, Inc. has filed... in this group research project remains open, and Interchangeable Virtual Instruments Foundation, Inc...

48 CFR 227.676 - Foreign patent interchange agreements.

Code of Federal Regulations, 2014 CFR

2014-10-01

... 48 Federal Acquisition Regulations System 3 2014-10-01 2014-10-01 false Foreign patent interchange... SYSTEM, DEPARTMENT OF DEFENSE GENERAL CONTRACTING REQUIREMENTS PATENTS, DATA, AND COPYRIGHTS Foreign License and Technical Assistance Agreements 227.676 Foreign patent interchange agreements. (a) Patent...

48 CFR 227.676 - Foreign patent interchange agreements.

Code of Federal Regulations, 2011 CFR

2011-10-01

... 48 Federal Acquisition Regulations System 3 2011-10-01 2011-10-01 false Foreign patent interchange... SYSTEM, DEPARTMENT OF DEFENSE GENERAL CONTRACTING REQUIREMENTS PATENTS, DATA, AND COPYRIGHTS Foreign License and Technical Assistance Agreements 227.676 Foreign patent interchange agreements. (a) Patent...

48 CFR 227.676 - Foreign patent interchange agreements.

Code of Federal Regulations, 2013 CFR

2013-10-01

... 48 Federal Acquisition Regulations System 3 2013-10-01 2013-10-01 false Foreign patent interchange... SYSTEM, DEPARTMENT OF DEFENSE GENERAL CONTRACTING REQUIREMENTS PATENTS, DATA, AND COPYRIGHTS Foreign License and Technical Assistance Agreements 227.676 Foreign patent interchange agreements. (a) Patent...

48 CFR 227.676 - Foreign patent interchange agreements.

Code of Federal Regulations, 2012 CFR

2012-10-01

... 48 Federal Acquisition Regulations System 3 2012-10-01 2012-10-01 false Foreign patent interchange... SYSTEM, DEPARTMENT OF DEFENSE GENERAL CONTRACTING REQUIREMENTS PATENTS, DATA, AND COPYRIGHTS Foreign License and Technical Assistance Agreements 227.676 Foreign patent interchange agreements. (a) Patent...

48 CFR 227.676 - Foreign patent interchange agreements.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 48 Federal Acquisition Regulations System 3 2010-10-01 2010-10-01 false Foreign patent interchange... SYSTEM, DEPARTMENT OF DEFENSE GENERAL CONTRACTING REQUIREMENTS PATENTS, DATA, AND COPYRIGHTS Foreign License and Technical Assistance Agreements 227.676 Foreign patent interchange agreements. (a) Patent...

2. AERIAL VIEW OF INTERCHANGE OF ARROYO SECO PARKWAY AND ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

2. AERIAL VIEW OF INTERCHANGE OF ARROYO SECO PARKWAY AND INTERSTATE I-5 INTERCHANGE. NOTE ARROYO SECO DRAINAGE INTO LOS ANGELES RIVER AT BOTTOM CENTER. - Arroyo Seco Parkway, Figueroa Street Viaduct, Spanning Los Angeles River, Los Angeles, Los Angeles County, CA

Missouri's experience with a diverging diamond interchange : lessons learned.

DOT National Transportation Integrated Search

2010-05-01

The first DDI in the nation opened to traffic on June 21, 2009, in Springfield, Missouri. The interchange in : Springfield where the Kansas Expressway (MO-13) passes over I-44 is a huge success. A diverging diamond : interchange (DDI), sometimes refe...

Interactive computer graphics - Why's, wherefore's and examples

NASA Technical Reports Server (NTRS)

Gregory, T. J.; Carmichael, R. L.

1983-01-01

The benefits of using computer graphics in design are briefly reviewed. It is shown that computer graphics substantially aids productivity by permitting errors in design to be found immediately and by greatly reducing the cost of fixing the errors and the cost of redoing the process. The possibilities offered by computer-generated displays in terms of information content are emphasized, along with the form in which the information is transferred. The human being is ideally and naturally suited to dealing with information in picture format, and the content rate in communication with pictures is several orders of magnitude greater than with words or even graphs. Since science and engineering involve communicating ideas, concepts, and information, the benefits of computer graphics cannot be overestimated.

Identifying performing and under performing graphic symbols for verbs and prepositions in animated and static formats: a research note.

PubMed

Schlosser, Ralf W; Shane, Howard; Sorce, James; Koul, Rajinder; Bloomfield, Emma

2011-09-01

The purpose of this study was to identify graphic symbols for verbs and prepositions that were performing and underperforming in static and animated formats in a recent experiment on the effects of animation on transparency, name agreement, and identification of graphic symbols. Variable-specific criteria were developed in order to define when a symbol is considered to be performing in terms of its transparency, name agreement, and identification accuracy. Additionally, across-variable heuristic criteria were developed that allowed classification of symbols into four categories: (a) performing exceptionally, (b) performing effectively, (c) performing adequately, and (d) performing inadequately. These criteria were applied to 24 symbols for verbs and 8 symbols for prepositions in both animated and static formats. Results indicated that the vast majority of the symbols performed adequately or better while a few did not. Potential reasons as to why some of the symbols may have underperformed are discussed. Where appropriate, implications for modifying existing symbols and future research are drawn. Although the fact that the heuristic criteria were developed post-hoc is discussed as a limitation, the benefits of the proposed categories bode well for future applications.

Statistical Analysis of Interchange Injection Events from Over a Decade of Cassini Data

NASA Astrophysics Data System (ADS)

Azari, A.; Jia, X.; Liemohn, M. W.; Sergis, N.; Thomsen, M. F.; Mitchell, D. G.; Rymer, A. M.; Paranicas, C.; Provan, G.; Ye, S.; Cowley, S. W. H.; Hospodarsky, G. B.; Vandegriff, J. D.; Kurth, W. S.

2017-12-01

The Cassini spacecraft has routinely observed interchange injection events with multiple instruments since arriving at Saturn in 2004. Interchange injection events are thought to initiate from a Rayleigh-Taylor like plasma instability sourced from Saturn's rapid rotation (period 10.8 hours) and dense plasma population outgassing primarily from Enceladus, and are the primary source of mass transport in the inner/middle magnetosphere. This dense plasma must be transported outward, and to conserve magnetic flux, inward moving flux tubes of low density, energetic (> keV) plasma from the outer reaches of the Saturnian system also occur. These inward-bound flux tubes are referred to as interchange injections. We will present a statistical evaluation of the occurrence rates of interchange injections at Saturn demonstrating seasonal dependence of interchange over the entirety of the Cassini mission's equatorial orbits between 2005 and 2016. We identify interchange events from CHarge Energy Mass Spectrometer (CHEMS) H+ data using a trained and tested automated algorithm. Our event identification compares well with manual identification and previous surveys of injections by L-shell and local time (Chen and Hill, 2008, Lai et al., 2016, Kennelly et al., 2013). We find that peak rates of interchange events occur between 7 - 9 Saturn radii, in agreement with previous surveys. We also evaluate interchange by preferred local time sector and season, splitting our events into pre-equinox, equinox, and post - equinox time periods. We determine that over all seasons, nightside occurrence dominated as compared to dayside, but the preferred dayside sector shifts from pre-noon during equinox, to post-noon during post-equinox. We will further investigate seasonal dependence by presenting occurrence organized by the phase systems derived based on Saturn kilometric radiation (SKR) and magnetic field perturbations (PPO).

Evaluation of alternative intersections and interchanges: volume 2 -- diverging diamond interchange signal timing.

DOT National Transportation Integrated Search

2015-12-01

This report presents findings from field studies of operations at diverging diamond interchanges (DDIs) in Salt Lake City, Utah and Fort : Wayne, Indiana. These discuss optimization of signal offsets both within the DDI, and with the DDI integrated a...

Comparison of the operational and safety characteristics of the single point urban and diamond interchanges.

DOT National Transportation Integrated Search

1996-01-01

The purpose of this study was to evaluate and compare the safety and operational characteristics of the single point urban interchange (SPUI) and the diamond interchange (DI) and develop guidelines that identify traffic and/or geometric conditions th...

What Kind of International Interchange Is Beneficial? Experiences of Taiwanese Indigenes

ERIC Educational Resources Information Center

Chen, Shan-Hua

2014-01-01

Because of globalization, international interchanges among indigenes in every country have become more frequent. Influenced by international multicultural trends, Taiwan's government not only supports indigenous populations to revive their traditional cultures, but also encourages the promotion of the international interchange activities among…

The effect of diagrammatic signing at head speed interchanges; final report, by Frank D. Shepard.

DOT National Transportation Integrated Search

1974-01-01

Improvements in highway guide signing at interchange areas are needed to reduce driver confusion and the accidents that result from it. One possible means of improving traffic operations within interchange areas is through the use of diagrammatic sig...

An experimental evaluation of patient decision aid design to communicate the effects of medications on the rate of progression of structural joint damage in rheumatoid arthritis.

PubMed

Martin, Richard W; Brower, Matthew E; Geralds, Alexander; Gallagher, Patience J; Tellinghuisen, Donald J

2012-03-01

To explore how effectively information presentation formats used in a patient decision aid communicated the ability of a disease modifying anti-rheumatic drug to slow the rate of progression of rheumatoid arthritis related structural joint damage (SJD). 91 first year psychology students and 91 RA patients participated in a prospective randomized, single blind, factorial experimental design evaluating the effect of four information formats on: satisfaction with risk communication, verbatim and gist recall of a hypothetical anti-rheumatic drug's ability to slow the rate of progression of SJD. Both groups underestimated the hypothetical drug's ability to slow SJD. Formats that supported the narrative statement with a reinforcing graphic element resulted in recall closer to the true value. Comparison of the results from testing of RA patients and college students were remarkably similar across formats. Rate of progression as communicated by narrative statement plus a graphic element (i.e. speedometer metaphor or pictograph) aided recall better than a narrative statement alone. Our results suggest that testing decision aid components with non-patients may provide data generalizable to patient populations. Graphics must be used carefully in patient decision aids as they can enhance recall, but may also introduce unintended recall bias. Copyright © 2011 Elsevier Ireland Ltd. All rights reserved.

Plots, Calculations and Graphics Tools (PCG2). Software Transfer Request Presentation

NASA Technical Reports Server (NTRS)

Richardson, Marilou R.

2010-01-01

This slide presentation reviews the development of the Plots, Calculations and Graphics Tools (PCG2) system. PCG2 is an easy to use tool that provides a single user interface to view data in a pictorial, tabular or graphical format. It allows the user to view the same display and data in the Control Room, engineering office area, or remote sites. PCG2 supports extensive and regular engineering needs that are both planned and unplanned and it supports the ability to compare, contrast and perform ad hoc data mining over the entire domain of a program's test data.

Towards of Vanadium Pentoxide Nanotubes and Thiols using Gold Nanoparticles

NASA Astrophysics Data System (ADS)

Lavayen, V.; Gonzalez, G.; Cardenas, G.; Sotomayor Torres, C. M.

2005-09-01

The template-directed synthesis is a promising route to realise 1-D nanostructures, an example of which is the formation of vanadium pentoxide nanotubes. In this work we report the interchange of long alkyl amines with alkyl thiols, this reaction was followed using gold nanoparticles prepared by the Chemical Liquid Deposition (CLD) method. The diameter of the gold clusters was 9 Å with a stability of about 85 days. SEM, TEM, EDAX and electron diffraction was the techniques used for the characterization of the reactions.

Naval Open Architecture Contract Guidebook for Program Managers

DTIC Science & Technology

2010-06-30

a whole, transform inputs into outputs. [IEEE/EIA Std. 12207 /1997] “APP233/ ISO 10303” – APP233 an “Application Protocol” for Systems Engineering...Language Metadata Interchange (XMI) and AP233/ ISO 10303). The contractor shall identify the proposed standards and formats to be used. The contractor...ANSI ISO /IEC 9075-1, ISO /IEC 9075-2, ISO /IEC 9075-3, ISO /IEC 9075-4, ISO /IEC 9075-5) 2. HTML for presentation layer (e.g., XML 1.0

Electronic Data Interchange (EDI): Using Electronic Commerce to Enhance Defense Logistics

DTIC Science & Technology

1991-01-01

computer technology that promises to enhance the nation’s productivity by moving both private and public sector business from a paper-based world to one...based solely on elec- tronic transactions. Simply stated, EDI is the electronic exchange of formatted business transactions between one organization’s...computer and another’s. In May 1988, the Deputy Secretary of Defense issued a policy direc- tive that EDI was to become the "way of doing business " for

Fact Retrieval for the 1980’s,

DTIC Science & Technology

1981-07-01

System (SANSS) which is used to identify a chemical substance , given its name or its structure, and refer the user to all CIS files that contain data...Information Interchange Data Description File Format." In 1978, this draft became the substance for the ANSI X3L5 committee, which included several...34Encoding and Decodin!g of Facts" Communications in the 1980s will require protection from eavesdropping and abuse . It is against the law to tap a telephone

A Change of Course: The Importance to DoD of International Standards for Electronic Commerce

DTIC Science & Technology

1991-01-01

The U.S. Department of Defense (DoD) is committed to using electronic commerce in the future with the over 300,000 vendors interested in doing...business with DoD. Electronic commerce will move DoD from a paper-based world to one based on electronic transactions enabled by the exchange of formatted...electronic messages referred to as electronic data interchange (EDI). With electronic commerce , DoD plans to reduce costs, increase effectiveness, and

5 CFR 214.204 - Interchange agreements.

Code of Federal Regulations, 2013 CFR

2013-01-01

... 5 Administrative Personnel 1 2013-01-01 2013-01-01 false Interchange agreements. 214.204 Section... EXECUTIVE SERVICE General Provisions § 214.204 Interchange agreements. (a) In accordance with 5 CFR 6.7, OPM... Service (SES) may, pursuant to legislative and regulatory authorities, enter into an agreement providing...

5 CFR 214.204 - Interchange agreements.

Code of Federal Regulations, 2011 CFR

2011-01-01

... 5 Administrative Personnel 1 2011-01-01 2011-01-01 false Interchange agreements. 214.204 Section... EXECUTIVE SERVICE General Provisions § 214.204 Interchange agreements. (a) In accordance with 5 CFR 6.7, OPM... Service (SES) may, pursuant to legislative and regulatory authorities, enter into an agreement providing...

TME2/342: The Role of the EXtensible Markup Language (XML) for Future Healthcare Application Development

PubMed Central

Noelle, G; Dudeck, J

1999-01-01

Two years, since the World Wide Web Consortium (W3C) has published the first specification of the eXtensible Markup Language (XML) there exist some concrete tools and applications to work with XML-based data. In particular, new generation Web browsers offer great opportunities to develop new kinds of medical, web-based applications. There are several data-exchange formats in medicine, which have been established in the last years: HL-7, DICOM, EDIFACT and, in the case of Germany, xDT. Whereas communication and information exchange becomes increasingly important, the development of appropriate and necessary interfaces causes problems, rising costs and effort. It has been also recognised that it is difficult to define a standardised interchange format, for one of the major future developments in medical telematics: the electronic patient record (EPR) and its availability on the Internet. Whereas XML, especially in an industrial environment, is celebrated as a generic standard and a solution for all problems concerning e-commerce, in a medical context there are only few applications developed. Nevertheless, the medical environment is an appropriate area for building XML applications: as the information and communication management becomes increasingly important in medical businesses, the role of the Internet changes quickly from an information to a communication medium. The first XML based applications in healthcare show us the advantage for a future engagement of the healthcare industry in XML: such applications are open, easy to extend and cost-effective. Additionally, XML is much more than a simple new data interchange format: many proposals for data query (XQL), data presentation (XSL) and other extensions have been proposed to the W3C and partly realised in medical applications.

ARCGRAPH SYSTEM - AMES RESEARCH GRAPHICS SYSTEM

NASA Technical Reports Server (NTRS)

Hibbard, E. A.

1994-01-01

Ames Research Graphics System, ARCGRAPH, is a collection of libraries and utilities which assist researchers in generating, manipulating, and visualizing graphical data. In addition, ARCGRAPH defines a metafile format that contains device independent graphical data. This file format is used with various computer graphics manipulation and animation packages at Ames, including SURF (COSMIC Program ARC-12381) and GAS (COSMIC Program ARC-12379). In its full configuration, the ARCGRAPH system consists of a two stage pipeline which may be used to output graphical primitives. Stage one is associated with the graphical primitives (i.e. moves, draws, color, etc.) along with the creation and manipulation of the metafiles. Five distinct data filters make up stage one. They are: 1) PLO which handles all 2D vector primitives, 2) POL which handles all 3D polygonal primitives, 3) RAS which handles all 2D raster primitives, 4) VEC which handles all 3D raster primitives, and 5) PO2 which handles all 2D polygonal primitives. Stage two is associated with the process of displaying graphical primitives on a device. To generate the various graphical primitives, create and reprocess ARCGRAPH metafiles, and access the device drivers in the VDI (Video Device Interface) library, users link their applications to ARCGRAPH's GRAFIX library routines. Both FORTRAN and C language versions of the GRAFIX and VDI libraries exist for enhanced portability within these respective programming environments. The ARCGRAPH libraries were developed on a VAX running VMS. Minor documented modification of various routines, however, allows the system to run on the following computers: Cray X-MP running COS (no C version); Cray 2 running UNICOS; DEC VAX running BSD 4.3 UNIX, or Ultrix; SGI IRIS Turbo running GL2-W3.5 and GL2-W3.6; Convex C1 running UNIX; Amhdahl 5840 running UTS; Alliant FX8 running UNIX; Sun 3/160 running UNIX (no native device driver); Stellar GS1000 running Stellex (no native device driver); and an SGI IRIS 4D running IRIX (no native device driver). Currently with version 7.0 of ARCGRAPH, the VDI library supports the following output devices: A VT100 terminal with a RETRO-GRAPHICS board installed, a VT240 using the Tektronix 4010 emulation capability, an SGI IRIS turbo using the native GL2 library, a Tektronix 4010, a Tektronix 4105, and the Tektronix 4014. ARCGRAPH version 7.0 was developed in 1988.

77 FR 66165 - Information Required in Notices and Petitions Containing Interchange Commitments

Federal Register 2010, 2011, 2012, 2013, 2014

2012-11-02

... information. Furthermore, parties objecting to a petition for exemption or those filing a petition to revoke... future interchange with a third-party connecting carrier, whether by outright prohibition, per-car... involves a provision or agreement that may limit future interchange with a third-party connecting carrier...

Measurements and Analyses of Science Interest in a School District.

ERIC Educational Resources Information Center

Bauman, Daniel Joseph

Reported is a study to investigate the relationship of science interest with three instrument formats: scaled rating, block, and card sort. The scaled rating format was the same form as that used in Likert instruments. The block format was the graphic form used in the typical semantic differential where a single stem or concept is followed by…

Computer-Based Instruction: Effect of Cognitive Style, Instructional Format, and Subject-Matter Content on Learning.

ERIC Educational Resources Information Center

Brent, Linda J. Buehner

This report describes an experiment investigating the effects of cognitive style, presentation format, and task content on learning. Cognitive style was described in terms of hemisphericity (i.e., left- or right-brain influence on perception). Presentation format consisted of graphics, text, and a combination of the two. The tasks consisted of…

Interchangeability of gas detection tubes and hand pumps.

PubMed

Haag, W R

2001-01-01

Users of gas detection tubes occasionally seek the convenience of using a single hand pump with different brands of tubes, to avoid the need to carry more than one pump. Several professional organizations recommend against such interchange. However, these recommendations appear to be based on a single study of pump designs that mostly are no longer in use. The present study was undertaken to determine if current hand pumps are interchangeable. Both piston-type and bellows-type hand pumps were evaluated by comparing pump flow profiles and test gas measurements with a variety of tubes. The results demonstrate that three piston hand pumps in common use (Sensidyne/Gastec GV/100, RAE Systems LP-1200, and Matheson-Kitagawa 8104-400A) are fully interchangeable. Two bellows pumps (Draeger Accuro and MSA Kwik-Draw) also are interchangeable with each other. Mixing of bellows and piston systems is often possible, but there are enough exceptions to conclude that such practice should be discouraged because it can give inaccurate readings. It is recommended that technical standards be adopted, such as total volume and an initial pump vacuum or a pump flow curve, to assess hand pump interchangeability. When two manufacturers' pumps meet the same standard and routine leak tests are conducted, interchangeability is scientifically valid and poses no risk to the end user while offering greater convenience.

An efficient algorithm for sorting by block-interchanges and its application to the evolution of vibrio species.

PubMed

Lin, Ying Chih; Lu, Chin Lung; Chang, Hwan-You; Tang, Chuan Yi

2005-01-01

In the study of genome rearrangement, the block-interchanges have been proposed recently as a new kind of global rearrangement events affecting a genome by swapping two nonintersecting segments of any length. The so-called block-interchange distance problem, which is equivalent to the sorting-by-block-interchange problem, is to find a minimum series of block-interchanges for transforming one chromosome into another. In this paper, we study this problem by considering the circular chromosomes and propose a Omicron(deltan) time algorithm for solving it by making use of permutation groups in algebra, where n is the length of the circular chromosome and delta is the minimum number of block-interchanges required for the transformation, which can be calculated in Omicron(n) time in advance. Moreover, we obtain analogous results by extending our algorithm to linear chromosomes. Finally, we have implemented our algorithm and applied it to the circular genomic sequences of three human vibrio pathogens for predicting their evolutionary relationships. Consequently, our experimental results coincide with the previous ones obtained by others using a different comparative genomics approach, which implies that the block-interchange events seem to play a significant role in the evolution of vibrio species.

Locating Biodiversity Data Through The Global Change Master Directory

NASA Technical Reports Server (NTRS)

Olsen, Lola M.

1998-01-01

The Global Change Master Directory (GCMD) presently holds descriptions for almost 7000 data sets held worldwide. The directory's primary purpose is for data discovery. The information provided through the GCMD's Directory Interchange Format (DIF) is the set of information that a researcher would need to determine if a particular data set could be of value. By offering data set descriptions worldwide in many scientific disciplines - including meteorology, oceanography, ecology, geology, hydrology, geophysics, remote sensing, paleoclimate, solar-terrestrial physics, and human dimensions of climate change - the GCMD simplifies the discovery of data sources. Direct linkages to many of the data sets are also provided. In addition, several data set registration tools are offered for populating the directory. To search the directory, one may choose the Guided Search or Free-Text Search. Two experimental interfaces were also made available with the latest software release - one based on a keyword search and another based on a graphical interface. The graphical interface was designed in collaboration with the Human Computer Interaction Laboratory at the University of Maryland. The latest version of the software, Version 6, was released in April, 1998. It features the implementation of a scheme to handle hierarchical data set collections (parent-child relationships); a hierarchical geospatial location search scheme; a Java-based geographic map for conducting geospatial searches; a Related-URL field for project-related data set collections, metadata extensions (such as more detailed inventory information), etc.; a new implementation of the Isite software; a new dataset language field; hyperlinked email addresses, and more. The key to the continued evolution of the GCMD is in the flexibility of the GCMD database, allowing modifications and additions to made relatively easily to maintain currency, thus providing the ability to capitalize on current technology while importing all existing records. Changes are discussed and approved through an online "interoperability" forum. The next major release of the GCMD is scheduled for early 1999 and will include the incorporation of a new matrix-based interface, a rapid valids-based query system; improvement in the operations facility - important for future distributed options; new streamlined code for greater performance and maintainability; improvements in the handling of seven current fields proposed through the interoperability forum (at no expense to the data providers); and the release of DOCmorph, a more robust version of DIFmorph to translate many 'standards' multi-directionally. Issues and actions will also be addressed.

A middle Eocene mesoeucrocodylian (Crocodyliformes) from the Kaninah Formation, Republic of Yemen

NASA Astrophysics Data System (ADS)

Stevens, Nancy J.; Hill, Robert V.; Al-Wosabi, Mohammed; Schulp, Anne; As-Saruri, Mustafa; Al-Nimey, Fuad; Jolley, Lea Ann; Schulp-Stuip, Yvonne; O'Connor, Patrick

2013-09-01

During the Cenozoic, the Arabian Plate separated from continental Africa and assumed a closer geographical relationship with Eurasia. As such, the vertebrate fossil record of the Arabian Peninsula has great potential for documenting faunal interchanges that occurred as a result of such tectonic events, with a shift from a primarily Afro-Arabian fauna in the Palaeogene to a more cosmopolitan fauna in the Neogene. Understanding of the sequence and timing of this faunal interchange has long been hampered by a lack of palaeontological data. Recently recovered fossils from the Middle Eocene Kaninah Formation of Yemen constitute the earliest Palaeogene record of continental vertebrates from the Arabian Peninsula, thereby offering a rare glimpse at the region's post- -Cretaceous fauna. Here we describe fossil materials from the Kaninah Formation, a collection of dental and postcranial elements representing a mesoeucrocodylian crocodyliform of unclear affinities. The specimen exhibits ziphodont tooth morphology along with a biserial paravertebral shield and polygonal gastral osteoderms, consistent with certain mesoeucrocodylians (e.g., ziphodontan notosuchians). Yet the associated fragmentary anterior caudal vertebra, although badly abraded, preserves morphology suggestive of procoely. This vertebral type in combination with the dental and osteoderm morphology is much more taxonomically restrictive and consistent with the suite of characters exhibited by atoposaurids, a finding that would significantly extend that clade through the Cretaceous/Palaeogene boundary. Alternatively, given the relative paucity of information from the region during the Palaeogene, the combination of characteristics of the Kaninah crocodyliform may reflect a novel or poorly known form exhibiting previously unrecognised character mosaicism. We take a conservative approach, and refer the Kaninah specimen to Mesoeucrocodylia, Atoposauridae (?) pending discovery of more complete material. New fossils recovered from the Kaninah Formation raise unanticipated questions about the longevity of Mesozoic clades, underscoring the role that the region may play in revealing novel occurrences, relictual forms, and evidence of faunal dispersals from this critical interval in vertebrate evolutionary history.

ART-ML: a new markup language for modelling and representation of biological processes in cardiovascular diseases.

PubMed

Karvounis, E C; Exarchos, T P; Fotiou, E; Sakellarios, A I; Iliopoulou, D; Koutsouris, D; Fotiadis, D I

2013-01-01

With an ever increasing number of biological models available on the internet, a standardized modelling framework is required to allow information to be accessed and visualized. In this paper we propose a novel Extensible Markup Language (XML) based format called ART-ML that aims at supporting the interoperability and the reuse of models of geometry, blood flow, plaque progression and stent modelling, exported by any cardiovascular disease modelling software. ART-ML has been developed and tested using ARTool. ARTool is a platform for the automatic processing of various image modalities of coronary and carotid arteries. The images and their content are fused to develop morphological models of the arteries in 3D representations. All the above described procedures integrate disparate data formats, protocols and tools. ART-ML proposes a representation way, expanding ARTool, for interpretability of the individual resources, creating a standard unified model for the description of data and, consequently, a format for their exchange and representation that is machine independent. More specifically, ARTool platform incorporates efficient algorithms which are able to perform blood flow simulations and atherosclerotic plaque evolution modelling. Integration of data layers between different modules within ARTool are based upon the interchange of information included in the ART-ML model repository. ART-ML provides a markup representation that enables the representation and management of embedded models within the cardiovascular disease modelling platform, the storage and interchange of well-defined information. The corresponding ART-ML model incorporates all relevant information regarding geometry, blood flow, plaque progression and stent modelling procedures. All created models are stored in a model repository database which is accessible to the research community using efficient web interfaces, enabling the interoperability of any cardiovascular disease modelling software models. ART-ML can be used as a reference ML model in multiscale simulations of plaque formation and progression, incorporating all scales of the biological processes.

Statistical Validation for Clinical Measures: Repeatability and Agreement of Kinect™-Based Software.

PubMed

Lopez, Natalia; Perez, Elisa; Tello, Emanuel; Rodrigo, Alejandro; Valentinuzzi, Max E

2018-01-01

The rehabilitation process is a fundamental stage for recovery of people's capabilities. However, the evaluation of the process is performed by physiatrists and medical doctors, mostly based on their observations, that is, a subjective appreciation of the patient's evolution. This paper proposes a tracking platform of the movement made by an individual's upper limb using Kinect sensor(s) to be applied for the patient during the rehabilitation process. The main contribution is the development of quantifying software and the statistical validation of its performance, repeatability, and clinical use in the rehabilitation process. The software determines joint angles and upper limb trajectories for the construction of a specific rehabilitation protocol and quantifies the treatment evolution. In turn, the information is presented via a graphical interface that allows the recording, storage, and report of the patient's data. For clinical purposes, the software information is statistically validated with three different methodologies, comparing the measures with a goniometer in terms of agreement and repeatability. The agreement of joint angles measured with the proposed software and goniometer is evaluated with Bland-Altman plots; all measurements fell well within the limits of agreement, meaning interchangeability of both techniques. Additionally, the results of Bland-Altman analysis of repeatability show 95% confidence. Finally, the physiotherapists' qualitative assessment shows encouraging results for the clinical use. The main conclusion is that the software is capable of offering a clinical history of the patient and is useful for quantification of the rehabilitation success. The simplicity, low cost, and visualization possibilities enhance the use of the software Kinect for rehabilitation and other applications, and the expert's opinion endorses the choice of our approach for clinical practice. Comparison of the new measurement technique with established goniometric methods determines that the proposed software agrees sufficiently to be used interchangeably.

Influence of graphic format on comprehension of risk information among American Indians.

PubMed

Sprague, Debra; LaVallie, Donna L; Wolf, Fredric M; Jacobsen, Clemma; Sayson, Kirsten; Buchwald, Dedra

2011-01-01

Presentation of risk information influences patients' ability to interpret health care options. Little is known about this relationship between risk presentation and interpretation among American Indians. Three hundred American Indian employees on a western American Indian reservation were invited to complete an anonymous written survey. All surveys included a vignette presenting baseline risk information about a hypothetical cancer and possible benefits of 2 prevention plans. Risk interpretation was assessed by correct answers to 3 questions evaluating the risk reduction associated with the plans. Numeric information was the same in all surveys, but framing varied; half expressed prevention benefits in terms of relative risk reduction and half in terms of absolute risk reduction. All surveys used text to describe the benefits of the 2 plans, but half included a graphic image. Surveys were distributed randomly. Responses were analyzed using binary logistic regression with the robust variance estimator to account for clustering of outcomes within participant. Use of a graphic image was associated with higher odds of correctly answering 3 risk interpretation questions (odds ratio = 2.5, 95% confidence interval = 1.5-4.0, P < 0.001) compared to the text-only format. These findings were similar to those of previous studies carried out in the general population. Neither framing information as relative compared to absolute risk nor the interaction between graphic image and relative risk presentation was associated with risk interpretation. One type of graphic image was associated with increased understanding of risk in a small sample of American Indian adults. The authors recommend further investigation of the effectiveness of other types of graphic displays for conveying health risk information to this population.

Documentation of a multiple-technique computer program for plotting major-ion composition of natural waters

USGS Publications Warehouse

Briel, L.I.

1993-01-01

A computer program was written to produce 6 different types of water-quality diagrams--Piper, Stiff, pie, X-Y, boxplot, and Piper 3-D--from the same file of input data. The Piper 3-D diagram is a new method that projects values from the surface of a Piper plot into a triangular prism to show how variations in chemical composition can be related to variations in other water-quality variables. This program is an analytical tool to aid in the interpretation of data. This program is interactive, and the user can select from a menu the type of diagram to be produced and a large number of individual features. Alternatively, these choices can be specified in the data file, which provides a batch mode for running the program. The program does not display water-quality diagrams directly; plots are written to a file. Four different plot- file formats are available: device-independent metafiles, Adobe PostScript graphics files, and two Hewlett-Packard graphics language formats (7475 and 7586). An ASCII data-table file is also produced to document the computed values. This program is written in Fortran '77 and uses graphics subroutines from either the PRIOR AGTK or the DISSPLA graphics library. The program has been implemented on Prime series 50 and Data General Aviion computers within the USGS; portability to other computing systems depends on the availability of the graphics library.

A compact ultra-clean system for deploying radioactive sources inside the KamLAND detector

DOE PAGES

Banks, T. I.; Freedman, S. J.; Wallig, J.; ...

2014-10-14

We describe a compact, ultra-clean device used to deploy radioactive sources along the vertical axis of the KamLAND liquid-scintillator neutrino detector for purposes of calibration. The device worked by paying out and reeling in precise lengths of a hanging, small-gauge wire rope (cable); an assortment of interchangeable radioactive sources could be attached to a weight at the end of the cable. All components exposed to the radiopure liquid scintillator were made of chemically compatible UHV-cleaned materials, primarily stainless steel, in order to avoid contaminating or degrading the scintillator. To prevent radon intrusion, the apparatus was enclosed in a hermetically sealedmore » housing inside a glove box, and both volumes were regularly flushed with purified nitrogen gas. Finally, an infrared camera attached to the side of the housing permitted real-time visual monitoring of the cable’s motion, and the system was controlled via a graphical user interface.« less

Aerodynamic results of a separation effects test on a 0.010-scale model (52-OTS) of the integrated SSV in the AEDC/VKF 40-by-40 inch supersonic wind tunnel A (IA111), volume 1

NASA Technical Reports Server (NTRS)

Chee, E.

1976-01-01

Graphical data obtained during experimental wind tunnel aerodynamic investigations of a 0.010 scale model (52-OTS) of the integrated space shuttle vehicle was presented. The purpose of this investigation was to obtain data with the solid rocket booster (SRB) in proximity to the orbiter/external tank (O/ET), over a large O/ET initial angle of attack and sideslip range, as well as data on the SRB alone (greatly separated from the O/ET). A captive trajectory system, which supported the SRB, was used with the tunnel primary sector (supporting the O/ET) to obtain grid type separation effects data. One symmetrical SRB model was used interchangeably to obtain right-hand and left-hand SRB data. The entire investigation was conducted at a free-stream Mach number of 4.5 at unit Reynolds number of 3.95 and 5.9 million per foot.

Tailoring risk communication to improve comprehension: Do patient preferences help or hurt?

PubMed

Barnes, Andrew J; Hanoch, Yaniv; Miron-Shatz, Talya; Ozanne, Elissa M

2016-09-01

Risk communication tools can facilitate patients' understanding of risk information. In this novel study, we examine the hypothesis that risk communication methods tailored to individuals' preferences can increase risk comprehension. Preferences for breast cancer risk formats, and risk comprehension data were collected using an online survey from 361 women at high risk for breast cancer. Women's initial preferences were assessed by asking them which of the following risk formats would be the clearest: (a) percentage, (b) frequency, (c) bar graph, (d) pictogram, and (e) comparison to other women. Next, women were presented with 5 different formats for displaying cancer risks and asked to interpret the risk information presented. Finally, they were asked again which risk format they preferred. Initial preferences for risk formats were not associated with risk comprehension scores. However, women with lower risk comprehension scores were more likely to update their risk format preferences after they evaluated risks in different formats. Less numerate women were more likely to prefer graphical rather than numeric risk formats. Importantly, we found that women preferring graphical risk formats had lower risk comprehension in these formats compared to numeric formats. In contrast, women preferring numeric formats performed equally well across formats. Our findings suggest that tailoring risk communication to patient preferences may not improve understanding of medical risks, particularly for less numerate women, and point to the potential perils of tailoring risk communication formats to patient preferences. (PsycINFO Database Record (c) 2016 APA, all rights reserved).

Interactive graphics to demonstrate health risks: formative development and qualitative evaluation

PubMed Central

Ancker, Jessica S.; Chan, Connie; Kukafka, Rita

2015-01-01

Background Recent findings suggest that interactive game-like graphics might be useful in communicating probabilities. We developed a prototype for a risk communication module, focusing on eliciting users’ preferences for different interactive graphics and assessing usability and user interpretations. Methods Focus groups and iterative design methods. Results Feedback from five focus groups was used to design the graphics. The final version displayed a matrix of square buttons; clicking on any button allowed the user to see whether the stick figure underneath was affected by the health outcome. When participants used this interaction to learn about a risk, they expressed more emotional responses, both positive and negative, than when viewing any static graphic or numerical description of a risk. Their responses included relief about small risks and concern about large risks. The groups also commented on static graphics: arranging the figures affected by disease randomly throughout a group of figures made it more difficult to judge the proportion affected but was described as more realistic. Conclusions Interactive graphics appear to have potential for expressing risk magnitude as well as the affective feeling of risk. Quantitative studies are planned to assess the effect on perceived risks and estimated risk magnitudes. PMID:19657926

TADPLOT program, version 2.0: User's guide

NASA Technical Reports Server (NTRS)

Hammond, Dana P.

1991-01-01

The TADPLOT Program, Version 2.0 is described. The TADPLOT program is a software package coordinated by a single, easy-to-use interface, enabling the researcher to access several standard file formats, selectively collect specific subsets of data, and create full-featured publication and viewgraph quality plots. The user-interface was designed to be independent from any file format, yet provide capabilities to accommodate highly specialized data queries. Integrated with an applications software network, data can be assessed, collected, and viewed quickly and easily. Since the commands are data independent, subsequent modifications to the file format will be transparent, while additional file formats can be integrated with minimal impact on the user-interface. The graphical capabilities are independent of the method of data collection; thus, the data specification and subsequent plotting can be modified and upgraded as separate functional components. The graphics kernel selected adheres to the full functional specifications of the CORE standard. Both interface and postprocessing capabilities are fully integrated into TADPLOT.

Focus on Health and Safety in Child Care: MCH Program Interchange.

ERIC Educational Resources Information Center

National Center for Education in Maternal and Child Health, Washington, DC.

The Maternal Child Health Program Interchange series is intended to promote the cooperative exchange of information about program ideas, activities, and materials. This issue of the Interchange provides information about selected materials and publications related to the health and safety of infants and young children in child care settings. The…

Software Aids In Graphical Depiction Of Flow Data

NASA Technical Reports Server (NTRS)

Stegeman, J. D.

1995-01-01

Interactive Data Display System (IDDS) computer program is graphical-display program designed to assist in visualization of three-dimensional flow in turbomachinery. Grid and simulation data files in PLOT3D format required for input. Able to unwrap volumetric data cone associated with centrifugal compressor and display results in easy-to-understand two- or three-dimensional plots. IDDS provides majority of visualization and analysis capability for Integrated Computational Fluid Dynamics and Experiment (ICE) system. IDDS invoked from any subsystem, or used as stand-alone package of display software. Generates contour, vector, shaded, x-y, and carpet plots. Written in C language. Input file format used by IDDS is that of PLOT3D (COSMIC item ARC-12782).

Dynamic tubulation of mitochondria drives mitochondrial network formation.

PubMed

Wang, Chong; Du, Wanqing; Su, Qian Peter; Zhu, Mingli; Feng, Peiyuan; Li, Ying; Zhou, Yichen; Mi, Na; Zhu, Yueyao; Jiang, Dong; Zhang, Senyan; Zhang, Zerui; Sun, Yujie; Yu, Li

2015-10-01

Mitochondria form networks. Formation of mitochondrial networks is important for maintaining mitochondrial DNA integrity and interchanging mitochondrial material, whereas disruption of the mitochondrial network affects mitochondrial functions. According to the current view, mitochondrial networks are formed by fusion of individual mitochondria. Here, we report a new mechanism for formation of mitochondrial networks through KIF5B-mediated dynamic tubulation of mitochondria. We found that KIF5B pulls thin, highly dynamic tubules out of mitochondria. Fusion of these dynamic tubules, which is mediated by mitofusins, gives rise to the mitochondrial network. We further demonstrated that dynamic tubulation and fusion is sufficient for mitochondrial network formation, by reconstituting mitochondrial networks in vitro using purified fusion-competent mitochondria, recombinant KIF5B, and polymerized microtubules. Interestingly, KIF5B only controls network formation in the peripheral zone of the cell, indicating that the mitochondrial network is divided into subzones, which may be constructed by different mechanisms. Our data not only uncover an essential mechanism for mitochondrial network formation, but also reveal that different parts of the mitochondrial network are formed by different mechanisms.

Structured, Graphical Analysis of C2 Teams and their Technologies

DTIC Science & Technology

2011-01-01

Two Fratricide Cases Revisited. Paper presented at the 15th International Command and Control Reserach and Technology Symposium (ICCRTS), June 22-24...network-enabled ADF. The paper is thus organized in three sections. The first section introduces the graphics for analyzing the formation and use...summarize, Colored Petri Nets center on networks in which tokens are created, moved, copied, or destroyed (Figure 1). An ellipse denotes a space for

Magnetic curvature effects on plasma interchange turbulence

DOE Office of Scientific and Technical Information (OSTI.GOV)

Li, B., E-mail: bli@pku.edu.cn; Liao, X.; Sun, C. K.

2016-06-15

The magnetic curvature effects on plasma interchange turbulence and transport in the Z-pinch and dipole-like systems are explored with two-fluid global simulations. By comparing the transport levels in the systems with a different magnetic curvature, we show that the interchange-mode driven transport strongly depends on the magnetic geometry. For the system with large magnetic curvature, the pressure and density profiles are strongly peaked in a marginally stable state and the nonlinear evolution of interchange modes produces the global convective cells in the azimuthal direction, which lead to the low level of turbulent convective transport.

Applications of Java and Vector Graphics to Astrophysical Visualization

NASA Astrophysics Data System (ADS)

Edirisinghe, D.; Budiardja, R.; Chae, K.; Edirisinghe, G.; Lingerfelt, E.; Guidry, M.

2002-12-01

We describe a series of projects utilizing the portability of Java programming coupled with the compact nature of vector graphics (SVG and SWF formats) for setup and control of calculations, local and collaborative visualization, and interactive 2D and 3D animation presentations in astrophysics. Through a set of examples, we demonstrate how such an approach can allow efficient and user-friendly control of calculations in compiled languages such as Fortran 90 or C++ through portable graphical interfaces written in Java, and how the output of such calculations can be packaged in vector-based animation having interactive controls and extremely high visual quality, but very low bandwidth requirements.

Program Helps Generate And Manage Graphics

NASA Technical Reports Server (NTRS)

Truong, L. V.

1994-01-01

Living Color Frame Maker (LCFM) computer program generates computer-graphics frames. Graphical frames saved as text files, in readable and disclosed format, easily retrieved and manipulated by user programs for wide range of real-time visual information applications. LCFM implemented in frame-based expert system for visual aids in management of systems. Monitoring, diagnosis, and/or control, diagrams of circuits or systems brought to "life" by use of designated video colors and intensities to symbolize status of hardware components (via real-time feedback from sensors). Status of systems can be displayed. Written in C++ using Borland C++ 2.0 compiler for IBM PC-series computers and compatible computers running MS-DOS.

Storyboarding Multimedia Interactions.

ERIC Educational Resources Information Center

Martin, Linda C.

2000-01-01

Understanding how to include interactivity when designing multimedia-based training (MBT) storyboards is a major key for a successful MBT. Discusses the basic formats of interactions and when to use each format. Describes how to storyboard and areas to address, including: the display area, prompts, branching, programming and graphics notes,…

Development of an Executive Level Stock Fund Handbook

DTIC Science & Technology

1990-09-01

graphics assistance, thorough proof-reading of countless rewrites, and prayer support. I want to thank Heike, my wife to be, for her tremendous patience...Usability........................... 46 Format Design ....................... 50 III. Methodology.................................... 52 Overall...54 Panel of Experts ....................57 Interview Instrument ................57 Handbook Format Design ............. 58 Handbook Usability

The Place of Community-Based Learning in Higher Education: A Case Study of Interchange

ERIC Educational Resources Information Center

Hardwick, Louise

2013-01-01

This article focuses on one strand of community engagement: community-based learning for students. It considers in particular Interchange as a case study. Interchange is a registered charity based in, but independent of, a department in a Higher Education Institution. It brokers between undergraduate research/work projects and Voluntary Community…

45 CFR 162.1802 - Standards for coordination of benefits information transaction.

Code of Federal Regulations, 2014 CFR

2014-10-01

....) (ii) The ASC X12 Standards for Electronic Data Interchange Technical Report Type 3—Health Care Claim... X12 Standards for Electronic Date Interchange Technical Report Type 3, October 2007, ASC X12N... Interchange Technical Report Type 3—Health Care Claim: Professional (837), May 2006, ASC X12N/005010X222...

45 CFR 162.1802 - Standards for coordination of benefits information transaction.

Code of Federal Regulations, 2010 CFR

2010-10-01

....) (ii) The ASC X12 Standards for Electronic Data Interchange Technical Report Type 3—Health Care Claim... X12 Standards for Electronic Date Interchange Technical Report Type 3, October 2007, ASC X12N... Interchange Technical Report Type 3—Health Care Claim: Professional (837), May 2006, ASC X12N/005010X222...

45 CFR 162.1102 - Standards for health care claims or equivalent encounter information transaction.

Code of Federal Regulations, 2014 CFR

2014-10-01

....) (ii) Dental health care claims. The ASC X12 Standards for Electronic Data Interchange Technical Report... Care Claim: Dental (837) ASC X12 Standards for Electronic Date Interchange Technical Report Type 3... care claims. The ASC X12 Standards for Electronic Data Interchange Technical Report Type 3—Health Care...

75 FR 27384 - Notice of Final Federal Agency Actions on Proposed Highway in California

Federal Register 2010, 2011, 2012, 2013, 2014

2010-05-14

... State Route 99 from the existing four-lane facility to six lanes from the Austin Road interchange in the... California. The State Route 99 Manteca Widening Project would provide congestion relief along a stretch of State Route 99 from the Austin Road interchange to the Arch Road interchange, improve future traffic...

Experimental demonstration of 1535-1555-nm simultaneous optical wavelength interchange with a nonlinear photonic crystal.

PubMed

Chowdhury, A; Staus, C; Boland, B F; Kuech, T F; McCaughan, L

2001-09-01

We present results of what is to our knowledge the first experimental demonstration of simultaneous optical wavelength interchange by use of a two-dimensional second-order nonlinear photonic crystal. Fabrication and performance parameters of a 1535-1555-nm wavelength interchange nonlinear photonic crystal fabricated in lithium niobate are discussed.

Switching between phenytoin generics in patients with epilepsy may lead to increased risk of breakthrough seizure: chart analysis and practice recommendations.

PubMed

Shin, Jung-Won; Chu, Kon; Jung, Keun-Hwa; Lee, Soon-Tae; Moon, Jangsup; Lee, Sang Kun

2014-12-01

The Food and Drug Administration (FDA) only requires bioequivalence testing of generic substitutions in order for them to be deemed equivalen to the original product. There may be a large difference of bioavailability among the generic drugs that especially have a narrow therapeutic index, and this may affect clinical outcomes. We aimed to determine whether switching from generic-to-generic equivalent anti-epileptic drugs (AEDs) in patients with epilepsy is associated with clinical outcomes. We performed a retrospective study using the electronic medical records of a tertiary hospital. Adults with a history of epilepsy who used a generic phenytoin and whose therapy was switched to another generic phenytoin between January 2012 and June 2013 were included (n = 80). We compared the drug concentration of phenytoin and seizure events before and after the switch. After switching their generic phenytoin, 33 out of 80 patients (41%) suffered from increasing seizure events (pre-interchange period, 0.44 ± 0.97; post-interchange period, 1.24 ± 2.05; p < 0.0001). The number of medical visits for acute seizure significantly increased in the post-interchange period. The phenytoin serum concentration of all the patients was lesser in the post-interchange period than in the pre-interchange period. (pre-interchange period, 12.79 μg/mL; post-interchange period, 6.36 μg/mL; p < 0.0001). Among the patients with drug resistant epilepsy (DRE), 17 patients (84.2%) had increasing seizure events in the post-interchange period. We confirmed that there was a significant difference in bioavailability between generic phenytoin. Therefore, when using or switching generic anti-epileptic drugs, therapeutic drug monitoring must be done, and the patients' condition must be considered.

PSTOOLS - FOUR PROGRAMS THAT INTERPRET/FORMAT POSTSCRIPT FILES

NASA Technical Reports Server (NTRS)

Choi, D.

1994-01-01

PSTOOLS is a package of four programs that operate on files written in the page description language, PostScript. The programs include a PostScript previewer for the IRIS workstation, a PostScript driver for the Matrix QCRZ film recorder, a PostScript driver for the Tektronix 4693D printer, and a PostScript code beautifier that formats PostScript files to be more legible. The three programs PSIRIS, PSMATRIX, and PSTEK are similar in that they all interpret the PostScript language and output the graphical results to a device, and they support color PostScript images. The common code which is shared by these three programs is included as a library of routines. PSPRETTY formats a PostScript file by appropriately indenting procedures and code delimited by "saves" and "restores." PSTOOLS does not use Adobe fonts. PSTOOLS is written in C-language for implementation on SGI IRIS 4D series workstations running IRIX 3.2 or later. A README file and UNIX man pages provide information regarding the installation and use of the PSTOOLS programs. A six-page manual which provides slightly more detailed information may be purchased separately. The standard distribution medium for this package is one .25 inch streaming magnetic tape cartridge in UNIX tar format. PSIRIS (the largest program) requires 1.2Mb of main memory. PSMATRIX requires the "gpib" board (IEEE 488) available from Silicon Graphics. Inc. The programs with graphical interfaces require that the IRIS have at least 24 bit planes. This package was developed in 1990 and updated in 1991. SGI, IRIS 4D, and IRIX are trademarks of Silicon Graphics, Inc. Matrix QCRZ is a registered trademark of the AGFA Group. Tektronix 4693D is a trademark of Tektronix, Inc. Adobe is a trademark of Adobe Systems Incorporated. PostScript is a registered trademark of Adobe Systems Incorporated. UNIX is a registered trademark of AT&T Bell Laboratories.

Automated system function allocation and display format: Task information processing requirements

NASA Technical Reports Server (NTRS)

Czerwinski, Mary P.

1993-01-01

An important consideration when designing the interface to an intelligent system concerns function allocation between the system and the user. The display of information could be held constant, or 'fixed', leaving the user with the task of searching through all of the available information, integrating it, and classifying the data into a known system state. On the other hand, the system, based on its own intelligent diagnosis, could display only relevant information in order to reduce the user's search set. The user would still be left the task of perceiving and integrating the data and classifying it into the appropriate system state. Finally, the system could display the patterns of data. In this scenario, the task of integrating the data is carried out by the system, and the user's information processing load is reduced, leaving only the tasks of perception and classification of the patterns of data. Humans are especially adept at this form of display processing. Although others have examined the relative effectiveness of alphanumeric and graphical display formats, it is interesting to reexamine this issue together with the function allocation problem. Currently, Johnson Space Center is the test site for an intelligent Thermal Control System (TCS), TEXSYS, being tested for use with Space Station Freedom. Expert TCS engineers, as well as novices, were asked to classify several displays of TEXSYS data into various system states (including nominal and anomalous states). Three different display formats were used: fixed, subset, and graphical. The hypothesis tested was that the graphical displays would provide for fewer errors and faster classification times by both experts and novices, regardless of the kind of system state represented within the display. The subset displays were hypothesized to be the second most effective display format/function allocation condition, based on the fact that the search set is reduced in these displays. Both the subset and the graphic display conditions were hypothesized to be processed more efficiently than the fixed display conditions.

The effect of graphical and numerical presentation of hypothetical prenatal diagnosis results on risk perception.

PubMed

Siegrist, Michael; Orlow, Pascale; Keller, Carmen

2008-01-01

To evaluate various formats for the communication of prenatal test results. In study 1 (N=400), female students completed a questionnaire assessing risk perception, affect, and perceived usefulness of prenatal test results. A randomized, 2 (risk level; low, high) x 4 (format; ratio with numerator 1, ratio with denominator 1000, Paling Perspective Scale, pictograms) design was used. Study 2 (N=200) employed a 2 (risk level; low, high) x 2 (format; Paling Perspective Scale, risk comparisons in numerical format) design. In study 1, the Paling Perspective Scale resulted in a higher level of perceived risk across different risk levels compared with the other formats. Furthermore, participants in the low-risk group perceived the test results as less risky compared with participants in the high-risk group (P < 0.001) when the Paling Perspective Scale was used. No significant differences between low and high risks were observed for the other 3 formats. In study 2, the Paling Perspective Scale evoked higher levels of perceived risks relative to the numerical presentation of risk comparisons. For both formats, we found that participants confronted with a high risk perceived test results as more risky compared with participants confronted with a low risk. The Paling Perspective Scale resulted in a higher level of perceived risk compared with the other formats. This effect must be taken into account when choosing a graphical or numerical format for risk communication.

Mesoscale and severe storms (Mass) data management and analysis system

NASA Technical Reports Server (NTRS)

Hickey, J. S.; Karitani, S.; Dickerson, M.

1984-01-01

Progress on the Mesoscale and Severe Storms (MASS) data management and analysis system is described. An interactive atmospheric data base management software package to convert four types of data (Sounding, Single Level, Grid, Image) into standard random access formats is implemented and integrated with the MASS AVE80 Series general purpose plotting and graphics display data analysis software package. An interactive analysis and display graphics software package (AVE80) to analyze large volumes of conventional and satellite derived meteorological data is enhanced to provide imaging/color graphics display utilizing color video hardware integrated into the MASS computer system. Local and remote smart-terminal capability is provided by installing APPLE III computer systems within individual scientist offices and integrated with the MASS system, thus providing color video display, graphics, and characters display of the four data types.

Development of an e-VLBI Data Transport Software Suite with VDIF

NASA Technical Reports Server (NTRS)

Sekido, Mamoru; Takefuji, Kazuhiro; Kimura, Moritaka; Hobiger, Thomas; Kokado, Kensuke; Nozawa, Kentarou; Kurihara, Shinobu; Shinno, Takuya; Takahashi, Fujinobu

2010-01-01

We have developed a software library (KVTP-lib) for VLBI data transmission over the network with the VDIF (VLBI Data Interchange Format), which is the newly proposed standard VLBI data format designed for electronic data transfer over the network. The software package keeps the application layer (VDIF frame) and the transmission layer separate, so that each layer can be developed efficiently. The real-time VLBI data transmission tool sudp-send is an application tool based on the KVTP-lib library. sudp-send captures the VLBI data stream from the VSI-H interface with the K5/VSI PC-board and writes the data to file in standard Linux file format or transmits it to the network using the simple- UDP (SUDP) protocol. Another tool, sudp-recv , receives the data stream from the network and writes the data to file in a specific VLBI format (K5/VSSP, VDIF, or Mark 5B). This software system has been implemented on the Wettzell Tsukuba baseline; evaluation before operational employment is under way.

Role of formats in the life cycle of data

NASA Technical Reports Server (NTRS)

Sawyer, Don

1993-01-01

This paper's perspective is based on the author's experience generating, analyzing, archiving, and distributing data obtained from satellites, and on the experience gained in data modeling and the development of standards for data understanding under the Consultative Committee for Space Data Systems (CCSDS). Data formats are used to represent all information in digital form, and thus play a major role in all interchanges and access to this information. The need to more efficiently manage and process rapidly growing quantities of data, and to preserve the information contained therein, continue to drive a great interest in data formats. The purpose of this paper is to examine the role of formats as they support the use of data within a space agency. The life-cycle identified is only one of many variations that would be recognized by those familiar with the 'space business', however it is expected that most of the issues raised will be pertinent to other 'space business' life cycles and to other 'non-space' disciplines as well.

10 CFR 2.1013 - Use of the electronic docket during the proceeding.

Code of Federal Regulations, 2010 CFR

2010-01-01

... bi-tonal documents. (v) Electronic submissions must be generated in the appropriate PDF output format by using: (A) PDF—Formatted Text and Graphics for textual documents converted from native applications; (B) PDF—Searchable Image (Exact) for textual documents converted from scanned documents; and (C...

AMPAC as an intelligent communication core for printing process

NASA Astrophysics Data System (ADS)

Mishina, Hiromichi; Yuasa, Tomonori

2000-12-01

The feature analysis of the conventional exchange format used in the field of the graphic arts is performed. It becomes clear from this consideration that most standard defining the transmission format have too strict limitations to adapt for the communication required in the creative and flexible work.

[The equivalence and interchangeability of medical articles].

PubMed

Antonov, V S

2013-11-01

The information concerning the interchangeability of medical articles is highly valuable because it makes it possible to correlate most precisely medical articles with medical technologies and medical care standards and to optimize budget costs under public purchasing. The proposed procedure of determination of interchangeability is based on criteria of equivalence of prescriptions, functional technical and technological characteristics and effectiveness of functioning of medical articles.

32 CFR 644.408 - Interchange of national forest and military and civil works lands.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 32 National Defense 4 2010-07-01 2010-07-01 true Interchange of national forest and military and... Property and Easement Interests § 644.408 Interchange of national forest and military and civil works lands. 16 U.S.C. 505a, 505b authorizes the Secretary of Agriculture, with respect to national forest lands...

USSAERO version D computer program development using ANSI standard FORTRAN 77 and DI-3000 graphics

NASA Technical Reports Server (NTRS)

Wiese, M. R.

1986-01-01

The D version of the Unified Subsonic Supersonic Aerodynamic Analysis (USSAERO) program is the result of numerous modifications and enhancements to the B01 version. These changes include conversion to ANSI standard FORTRAN 77; use of the DI-3000 graphics package; removal of the overlay structure; a revised input format; the addition of an input data analysis routine; and increasing the number of aeronautical components allowed.

Proceedings of the Annual Meeting of the Association for Education in Journalism and Mass Communication (75th, Montreal, Quebec, Canada, August 5-8, 1992). Part IX: Media and Technology.

ERIC Educational Resources Information Center

Association for Education in Journalism and Mass Communication.

The Media and Technology section of these proceedings contains the following six papers: "The Effects of Tabular and Graphical Display Formats on Time Spent Processing Statistics" (James D. Kelly); "Program Choice in a Broadband Environment" (Steven S. Wildman and Nancy Y. Lee); "Visual Crosstabs: A Technique for Enriching Information Graphics"…

Accelerating Malware Detection via a Graphics Processing Unit

DTIC Science & Technology

2010-09-01

Processing Unit . . . . . . . . . . . . . . . . . . 4 PE Portable Executable . . . . . . . . . . . . . . . . . . . . . 4 COFF Common Object File Format...operating systems for the future [Szo05]. The PE format is an updated version of the common object file format ( COFF ) [Mic06]. Microsoft released a new...NAs02]. These alerts can be costly in terms of time and resources for individuals and organizations to investigate each misidentified file [YWL07] [Vak10

ePrescribing: Reducing Costs through In-Class Therapeutic Interchange.

PubMed

Stenner, Shane P; Chakravarthy, Rohini; Johnson, Kevin B; Miller, William L; Olson, Julie; Wickizer, Marleen; Johnson, Nate N; Ohmer, Rick; Uskavitch, David R; Bernard, Gordon R; Neal, Erin B; Lehmann, Christoph U

2016-12-14

Spending on pharmaceuticals in the US reached $373.9 billion in 2014. Therapeutic interchange offers potential medication cost savings by replacing a prescribed drug for an equally efficacious therapeutic alternative. Hard-stop therapeutic interchange recommendation alerts were developed for four medication classes (HMG-CoA reductase inhibitors, serotonin receptor agonists, intranasal steroid sprays, and proton-pump inhibitors) in an electronic prescription-writing tool for outpatient prescriptions. Using prescription data from January 2012 to June 2015, the Compliance Ratio (CR) was calculated by dividing the number of prescriptions with recommended therapeutic interchange medications by the number of prescriptions with non-recommended medications to measure effectiveness. To explore potential cost savings, prescription data and medication costs were analyzed for the 45,000 Vanderbilt Employee Health Plan members. For all medication classes, significant improvements were demonstrated - the CR improved (proton-pump inhibitors 2.8 to 5.32, nasal steroids 2.44 to 8.16, statins 2.06 to 5.51, and serotonin receptor agonists 0.8 to 1.52). Quarterly savings through the four therapeutic interchange interventions combined exceeded $200,000 with an estimated annual savings for the health plan of $800,000, or more than $17 per member. A therapeutic interchange clinical decision support tool at the point of prescribing resulted in increased compliance with recommendations for outpatient prescriptions while producing substantial cost savings to the Vanderbilt Employee Health Plan - $17.77 per member per year. Therapeutic interchange rules require rational targeting, appropriate governance, and vigilant content updates.

A Magnetohydrodynamic Modeling of the Interchange Cycle for Oblique Northward Interplanetary Magnetic Field

NASA Astrophysics Data System (ADS)

Watanabe, Masakazu; Fujita, Shigeru; Tanaka, Takashi; Kubota, Yasubumi; Shinagawa, Hiroyuki; Murata, Ken T.

2018-01-01

We perform numerical modeling of the interchange cycle in the magnetosphere-ionosphere convection system for oblique northward interplanetary magnetic field (IMF). The interchange cycle results from the coupling of IMF-to-lobe reconnection and lobe-to-closed reconnection. Using a global magnetohydrodynamic simulation code, for an IMF clock angle of 20° (measured from due north), we successfully reproduced the following features of the interchange cycle. (1) In the ionosphere, for each hemisphere, there appears a reverse cell circulating exclusively in the closed field line region (the reciprocal cell). (2) The topology transition of the magnetic field along a streamline near the equatorial plane precisely represents the magnetic flux reciprocation during the interchange cycle. (3) Field-aligned electric fields on the interplanetary-open separatrix and on the open-closed separatrix are those that are consistent with IMF-to-lobe reconnection and lobe-to-closed reconnection, respectively. These three features prove the existence of the interchange cycle in the simulated magnetosphere-ionosphere system. We conclude that the interchange cycle does exist in the real solar wind-magnetosphere-ionosphere system. In addition, the simulation revealed that the reciprocal cell described above is not a direct projection of the diffusion region as predicted by the "vacuum" model in which diffusion is added a priori to the vacuum magnetic topology. Instead, the reciprocal cell is a consequence of the plasma convection system coupled to the so-called NBZ ("northward Bz") field-aligned current system.

Regional seismic lines reprocessed using post-stack processing techniques; National Petroleum Reserve, Alaska

USGS Publications Warehouse

Miller, John J.; Agena, W.F.; Lee, M.W.; Zihlman, F.N.; Grow, J.A.; Taylor, D.J.; Killgore, Michele; Oliver, H.L.

2000-01-01

This CD-ROM contains stacked, migrated, 2-Dimensional seismic reflection data and associated support information for 22 regional seismic lines (3,470 line-miles) recorded in the National Petroleum Reserve ? Alaska (NPRA) from 1974 through 1981. Together, these lines constitute about one-quarter of the seismic data collected as part of the Federal Government?s program to evaluate the petroleum potential of the Reserve. The regional lines, which form a grid covering the entire NPRA, were created by combining various individual lines recorded in different years using different recording parameters. These data were reprocessed by the USGS using modern, post-stack processing techniques, to create a data set suitable for interpretation on interactive seismic interpretation computer workstations. Reprocessing was done in support of ongoing petroleum resource studies by the USGS Energy Program. The CD-ROM contains the following files: 1) 22 files containing the digital seismic data in standard, SEG-Y format; 2) 1 file containing navigation data for the 22 lines in standard SEG-P1 format; 3) 22 small scale graphic images of each seismic line in Adobe Acrobat? PDF format; 4) a graphic image of the location map, generated from the navigation file, with hyperlinks to the graphic images of the seismic lines; 5) an ASCII text file with cross-reference information for relating the sequential trace numbers on each regional line to the line number and shotpoint number of the original component lines; and 6) an explanation of the processing used to create the final seismic sections (this document). The SEG-Y format seismic files and SEG-P1 format navigation file contain all the information necessary for loading the data onto a seismic interpretation workstation.

Science network resources: Distributed systems

NASA Technical Reports Server (NTRS)

Cline, Neal

1991-01-01

The Master Directory, which is overview information about whole data sets, is outlined. The data system environment is depicted. The question is explored of what is a prototype international directory including purpose and features. Advantages of on-line directories are listed. Interconnected directory assumptions are given. A description of given of DIF (Directory Interchange Format), which is an exchange file for directory information, along with information content of DIF and directories. The directory population status is given in a percentage viewgraph. The present and future directory interconnections status at GSFC is also listed.

75 FR 10015 - Notice of Final Federal Agency Actions on the Interchange of State Loop 1604 and United States...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-03-04

... on the Interchange of State Loop 1604 and United States Highway 281 in Texas AGENCY: Federal Highway... agencies that are final within the meaning of 23 U.S.C. 139(l)(1). The actions relate to a proposed highway project, the interchange of Texas State Loop 1604 (LP 1604) with United States Highway 281 (US 281...

Attention Interchanges at Story-Time: A Case Study from a Deaf and Hearing Twin Pair Acquiring Swedish Sign Language in Their Deaf Family

ERIC Educational Resources Information Center

Cramer-Wolrath, Emelie

2012-01-01

This case study longitudinally analyzes and describes the changes of attentional expressions in interchanges between a pair of fraternal twins, 1 deaf and 1 hearing, from the age of 10-40 months, and their Deaf family members. The video-observed attentional expressions of initiating and reestablishing interchange were grouped in 5 functional…

Specifics on a XML Data Format for Scientific Data

NASA Astrophysics Data System (ADS)

Shaya, E.; Thomas, B.; Cheung, C.

An XML-based data format for interchange and archiving of scientific data would benefit in many ways from the features standardized in XML. Foremost of these features is the world-wide acceptance and adoption of XML. Applications, such as browsers, XQL and XSQL advanced query, XML editing, or CSS or XSLT transformation, that are coming out of industry and academia can be easily adopted and provide startling new benefits and features. We have designed a prototype of a core format for holding, in a very general way, parameters, tables, scalar and vector fields, atlases, animations and complex combinations of these. This eXtensible Data Format (XDF) makes use of XML functionalities such as: self-validation of document structure, default values for attributes, XLink hyperlinks, entity replacements, internal referencing, inheritance, and XSLT transformation. An API is available to aid in detailed assembly, extraction, and manipulation. Conversion tools to and from FITS and other existing data formats are under development. In the future, we hope to provide object oriented interfaces to C++, Java, Python, IDL, Mathematica, Maple, and various databases. http://xml.gsfc.nasa.gov/XDF

Engine monitoring display study

NASA Technical Reports Server (NTRS)

Hornsby, Mary E.

1992-01-01

The current study is part of a larger NASA effort to develop displays for an engine-monitoring system to enable the crew to monitor engine parameter trends more effectively. The objective was to evaluate the operational utility of adding three types of information to the basic Boeing Engine Indicating and Crew Alerting System (EICAS) display formats: alphanumeric alerting messages for engine parameters whose values exceed caution or warning limits; alphanumeric messages to monitor engine parameters that deviate from expected values; and a graphic depiction of the range of expected values for current conditions. Ten training and line pilots each flew 15 simulated flight scenarios with five variants of the basic EICAS format; these variants included different combinations of the added information. The pilots detected engine problems more quickly when engine alerting messages were included in the display; adding a graphic depiction of the range of expected values did not affect detection speed. The pilots rated both types of alphanumeric messages (alert and monitor parameter) as more useful and easier to interpret than the graphic depiction. Integrating engine parameter messages into the EICAS alerting system appears to be both useful and preferred.

VAGUE: a graphical user interface for the Velvet assembler.

PubMed

Powell, David R; Seemann, Torsten

2013-01-15

Velvet is a popular open-source de novo genome assembly software tool, which is run from the Unix command line. Most of the problems experienced by new users of Velvet revolve around constructing syntactically and semantically correct command lines, getting input files into acceptable formats and assessing the output. Here, we present Velvet Assembler Graphical User Environment (VAGUE), a multi-platform graphical front-end for Velvet. VAGUE aims to make sequence assembly accessible to a wider audience and to facilitate better usage amongst existing users of Velvet. VAGUE is implemented in JRuby and targets the Java Virtual Machine. It is available under an open-source GPLv2 licence from http://www.vicbioinformatics.com/. torsten.seemann@monash.edu.

Graphic gambling warnings: how they affect emotions, cognitive responses and attitude change.

PubMed

Muñoz, Yaromir; Chebat, Jean-Charles; Borges, Adilson

2013-09-01

The present study focuses on the effects of graphic warnings related to excessive gambling. It is based upon a theoretical model derived from both the Protection Motivation Theory (PMT) and the Elaboration Likelihood Model (ELM). We focus on video lottery terminal (VLT), one of the most hazardous format in the gaming industry. Our cohort consisted of 103 actual gamblers who reported previous gambling activity on VLT's on a regular basis. We assess the effectiveness of graphic warnings vs. text-only warnings and the effectiveness of two major arguments (i.e., family vs. financial disruption). A 2 × 2 factorial design was used to test the direct and combined effects of two variables (i.e., warning content and presence vs. absence of a graphic). It was found that the presence of a graphic enhances both cognitive appraisal and fear, and has positive effects on the Depth of Information Processing. In addition, graphic content combined with family disruptions is more effective for changing attitudes and complying with the warning than other combinations of the manipulated variables. It is proposed that ELM and PMT complement each other to explain the effects of warnings. Theoretical and practical implications are discussed.

phiGENOME: an integrative navigation throughout bacteriophage genomes.

PubMed

Stano, Matej; Klucar, Lubos

2011-11-01

phiGENOME is a web-based genome browser generating dynamic and interactive graphical representation of phage genomes stored in the phiSITE, database of gene regulation in bacteriophages. phiGENOME is an integral part of the phiSITE web portal (http://www.phisite.org/phigenome) and it was optimised for visualisation of phage genomes with the emphasis on the gene regulatory elements. phiGENOME consists of three components: (i) genome map viewer built using Adobe Flash technology, providing dynamic and interactive graphical display of phage genomes; (ii) sequence browser based on precisely formatted HTML tags, providing detailed exploration of genome features on the sequence level and (iii) regulation illustrator, based on Scalable Vector Graphics (SVG) and designed for graphical representation of gene regulations. Bringing 542 complete genome sequences accompanied with their rich annotations and references, makes phiGENOME a unique information resource in the field of phage genomics. Copyright © 2011 Elsevier Inc. All rights reserved.

Representation Use and Strategy Choice in Physics Problem Solving

ERIC Educational Resources Information Center

De Cock, Mieke

2012-01-01

In this paper, we examine student success on three variants of a test item given in different representational formats (verbal, pictorial, and graphical), with an isomorphic problem statement. We confirm results from recent papers where it is mentioned that physics students' problem-solving competence can vary with representational format and that…

Using Presentation Software to Flip an Undergraduate Analytical Chemistry Course

ERIC Educational Resources Information Center

Fitzgerald, Neil; Li, Luisa

2015-01-01

An undergraduate analytical chemistry course has been adapted to a flipped course format. Course content was provided by video clips, text, graphics, audio, and simple animations organized as concept maps using the cloud-based presentation platform, Prezi. The advantages of using Prezi to present course content in a flipped course format are…

Multimedia Use in Higher Education in the UAE: A Cognitive Load Theory Perspective

ERIC Educational Resources Information Center

Moussa-Inaty, Jase; Atallah, Fida

2012-01-01

The study investigates the use of different multimedia instructional design formats on learning. Undergraduate students from the College of Education at a public university in the United Arab Emirates were randomly assigned to groups corresponding to six instructional design formats, namely; Listen Only, Read Only, Read+ Listen, Listen + Graphics,…

Enabling systematic, harmonised and large-scale biofilms data computation: the Biofilms Experiment Workbench.

PubMed

Pérez-Rodríguez, Gael; Glez-Peña, Daniel; Azevedo, Nuno F; Pereira, Maria Olívia; Fdez-Riverola, Florentino; Lourenço, Anália

2015-03-01

Biofilms are receiving increasing attention from the biomedical community. Biofilm-like growth within human body is considered one of the key microbial strategies to augment resistance and persistence during infectious processes. The Biofilms Experiment Workbench is a novel software workbench for the operation and analysis of biofilms experimental data. The goal is to promote the interchange and comparison of data among laboratories, providing systematic, harmonised and large-scale data computation. The workbench was developed with AIBench, an open-source Java desktop application framework for scientific software development in the domain of translational biomedicine. Implementation favours free and open-source third-parties, such as the R statistical package, and reaches for the Web services of the BiofOmics database to enable public experiment deposition. First, we summarise the novel, free, open, XML-based interchange format for encoding biofilms experimental data. Then, we describe the execution of common scenarios of operation with the new workbench, such as the creation of new experiments, the importation of data from Excel spreadsheets, the computation of analytical results, the on-demand and highly customised construction of Web publishable reports, and the comparison of results between laboratories. A considerable and varied amount of biofilms data is being generated, and there is a critical need to develop bioinformatics tools that expedite the interchange and comparison of microbiological and clinical results among laboratories. We propose a simple, open-source software infrastructure which is effective, extensible and easy to understand. The workbench is freely available for non-commercial use at http://sing.ei.uvigo.es/bew under LGPL license. Copyright © 2015 Elsevier Ireland Ltd. All rights reserved.

Numerical Simulation of Rotation-Driven Plasma Transport In the Jovian Magnetosphere

NASA Technical Reports Server (NTRS)

Wolf, Richard A.

1997-01-01

A Jupiter version of the Rice Convection Model (RCM-J) was developed with support of an earlier NASA SR&T grant. The conversion from Earth to Jupiter included adding currents driven by centrifugal force, reversing the planetary magnetic field, and rescaling various parameters. A series of informative runs was carried out, all of them solving initial value problems. The simulations followed an initial plasma torus configuration as it fell apart by interchange instability. Some conclusions from the simulations were the following: 1. We confirmed that, for conventional values of the torus density and ionospheric conductance, the torus disintegrates by interchange instability on a time scale of approx. one day, which is 1-2 orders of magnitude shorter than the best estimates of the average residence time of plasma in the torus. 2. In the model, the instability could be slowed to an arbitrary degree by the addition of sufficient impounding energetic particles, as suggested earlier by Siscoe et al (1981). However, the observed energetic particles do not seem sufficient to guarantee impoundment (e.g., Mauk et al., 1996). 3. Whether inhibited by impoundment or not, the interchange was found to proceed by the formation of long fingers, which get thinner as they get longer. This picture differed dramatically from the conventional radial-diffusion picture (e.g., Siscoe and Summers (1981)), more superficially with the outward-moving-blob picture (Pontius and Hill, 1989). The obvious limitation of the original RCM-J was that it could not represent a plasma source. We could represent the decay of a pre-existing torus, but we could not represent the way ionization of material from Io continually replenishes the plasma. We consequently were precluded from studying a whole set of fundamental issues of torus theory, including whether the system can come to a steady state.

Disulphide bonds in casein micelle from milk.

PubMed

Bouguyon, Edwige; Beauvallet, Christian; Huet, Jean-Claude; Chanat, Eric

2006-05-05

Mammary epithelial cells synthesised and secreted caseins, the major milk proteins in most mammals, as large aggregates called micelles into the alveolar lumen they surround. We investigated the implication of the highly conserved cysteine(s) of kappa-casein in disulphide bond formation in casein micelles from several species. Dimers were found in all milks studied, confirming previous observation in ruminants. More importantly, the study of interchain disulphide bridges in mouse and rat casein micelles revealed that any casein possessing a cysteine is engaged in disulphide bond interchange; these species express four or five cysteine-containing caseins, respectively. We found that the main rodent caseins form both homo- and heterodimers. Additionally, disulphide bond formation among milk proteins was specific since the interaction of the caseins with cysteine-containing whey proteins was not observed in native casein micelles.

Positional interchanges influence the physical and technical match performance variables of elite soccer players.

PubMed

Schuth, G; Carr, G; Barnes, C; Carling, C; Bradley, P S

2016-01-01

Positional variation in match performance is well established in elite soccer but no information exists on players switching positions. This study investigated the influence of elite players interchanging from one position to another on physical and technical match performance. Data were collected from multiple English Premier League (EPL) seasons using a computerised tracking system. After adhering to stringent inclusion criteria, players were examined across several interchanges: central-defender to fullback (CD-FB, n = 11, 312 observations), central-midfielder to wide-midfielder (CM-WM, n = 7, 171 observations), wide-midfielder to central-midfielder (WM-CM, n = 7, 197 observations) and attacker to wide-midfielder (AT-WM, n = 4, 81 observations). Players interchanging from CD-FB covered markedly more high-intensity running and sprinting distance (effect size [ES]: -1.56 and -1.26), lost more possessions but made more final third entries (ES: -1.23 and -1.55). Interchanging from CM-WM and WM-CM resulted in trivial to moderate differences in both physical (ES: -0.14-0.59 and -0.21-0.39) and technical performances (ES: -0.48-0.64 and -0.36-0.54). Players interchanging from AT-WM demonstrated a moderate difference in high-intensity running without possession (ES: -0.98) and moderate-to-large differences in the number of clearances, tackles and possessions won (ES: -0.77, -1.16 and -1.41). The data demonstrate that the physical and technical demands vary greatly from one interchange to another but utility players seem able to adapt to these positional switches.

ePrescribing: Reducing Costs Through In-Class Therapeutic Interchange

PubMed Central

Stenner, Shane P.; Chakravarthy, Rohini; Johnson, Kevin B.; Miller, William L.; Olson, Julie; Wickizer, Marleen; Johnson, Nate N.; Ohmer, Rick; Uskavitch, David R.; Bernard, Gordon R.; Neal, Erin B.

2016-01-01

Summary Introduction Spending on pharmaceuticals in the US reached $373.9 billion in 2014. Therapeutic interchange offers potential medication cost savings by replacing a prescribed drug for an equally efficacious therapeutic alternative. Methods Hard-stop therapeutic interchange recommendation alerts were developed for four medication classes (HMG-CoA reductase inhibitors, serotonin receptor agonists, intranasal steroid sprays, and proton-pump inhibitors) in an electronic prescription-writing tool for outpatient prescriptions. Using prescription data from January 2012 to June 2015, the Compliance Ratio (CR) was calculated by dividing the number of prescriptions with recommended therapeutic interchange medications by the number of prescriptions with non-recommended medications to measure effectiveness. To explore potential cost savings, prescription data and medication costs were analyzed for the 45,000 Vanderbilt Employee Health Plan members. Results For all medication classes, significant improvements were demonstrated – the CR improved (proton-pump inhibitors 2.8 to 5.32, nasal steroids 2.44 to 8.16, statins 2.06 to 5.51, and serotonin receptor agonists 0.8 to 1.52). Quarterly savings through the four therapeutic interchange interventions combined exceeded $200,000 with an estimated annual savings for the health plan of $800,000, or more than $17 per member. Conclusion A therapeutic interchange clinical decision support tool at the point of prescribing resulted in increased compliance with recommendations for outpatient prescriptions while producing substantial cost savings to the Vanderbilt Employee Health Plan – $17.77 per member per year. Therapeutic interchange rules require rational targeting, appropriate governance, and vigilant content updates. PMID:27966005

On Complex Networks Representation and Computation of Hydrologycal Quantities

NASA Astrophysics Data System (ADS)

Serafin, F.; Bancheri, M.; David, O.; Rigon, R.

2017-12-01

Water is our blue gold. Despite results of discovery-based science keep warning public opinion about the looming worldwide water crisis, water is still treated as a not worth taking resource. Could a different multi-scale perspective affect environmental decision-making more deeply? Can also a further pairing to a new graphical representation of processes interaction sway decision-making more effectively and public opinion consequently?This abstract introduces a complex networks driven way to represent catchments eco-hydrology and related flexible informatics to manage it. The representation is built upon mathematical category. A category is an algebraic structure that comprises "objects" linked by "arrows". It is an evolution of Petri Nets said Time Continuous Petri Nets (TCPN). It aims to display (water) budgets processes and catchment interactions using explicative and self-contained symbolism. The result improves readability of physical processes compared to current descriptions. The IT perspective hinges on the Object Modeling System (OMS) v3. The latter is a non-invasive flexible environmental modeling framework designed to support component-based model development. The implementation of a Directed Acyclic Graph (DAG) data structure, named Net3, has recently enhanced its flexibility. Net3 represents interacting systems as complex networks: vertices match up with any sort of time evolving quantity; edges correspond to their data (fluxes) interchange. It currently hosts JGrass-NewAge components, and those implementing travel time analysis of fluxes. Further bio-physical or management oriented components can be easily added.This talk introduces both graphical representation and related informatics exercising actual applications and examples.

The effect of using graphic organizers in the teaching of standard biology

NASA Astrophysics Data System (ADS)

Pepper, Wade Louis, Jr.

This study was conducted to determine if the use of graphic organizers in the teaching of standard biology would increase student achievement, involvement and quality of activities. The subjects were 10th grade standard biology students in a large southern inner city high school. The study was conducted over a six-week period in an instructional setting using action research as the investigative format. After calculation of the homogeneity between classes, random selection was used to determine the graphic organizer class and the control class. The graphic organizer class was taught unit material through a variety of instructional methods along with the use of teacher generated graphic organizers. The control class was taught the same unit material using the same instructional methods, but without the use of graphic organizers. Data for the study were gathered from in-class written assignments, teacher-generated tests and text-generated tests, and rubric scores of an out-of-class written assignment and project. Also, data were gathered from student reactions, comments, observations and a teacher's research journal. Results were analyzed using descriptive statistics and qualitative interpretation. By comparing statistical results, it was determined that the use of graphic organizers did not make a statistically significant difference in the understanding of biological concepts and retention of factual information. Furthermore, the use of graphic organizers did not make a significant difference in motivating students to fulfill all class assignments with quality efforts and products. However, based upon student reactions and comments along with observations by the researcher, graphic organizers were viewed by the students as a favorable and helpful instructional tool. In lieu of statistical results, student gains from instructional activities using graphic organizers were positive and merit the continuation of their use as an instructional tool.

Neotropical mammal diversity and the Great American Biotic Interchange: spatial and temporal variation in South America's fossil record

PubMed Central

Carrillo, Juan D.; Forasiepi, Analía; Jaramillo, Carlos; Sánchez-Villagra, Marcelo R.

2015-01-01

The vast mammal diversity of the Neotropics is the result of a long evolutionary history. During most of the Cenozoic, South America was an island continent with an endemic mammalian fauna. This isolation ceased during the late Neogene after the formation of the Isthmus of Panama, resulting in an event known as the Great American Biotic Interchange (GABI). In this study, we investigate biogeographic patterns in South America, just before or when the first immigrants are recorded and we review the temporal and geographical distribution of fossil mammals during the GABI. We performed a dissimilarity analysis which grouped the faunal assemblages according to their age and their geographic distribution. Our data support the differentiation between tropical and temperate assemblages in South America during the middle and late Miocene. The GABI begins during the late Miocene (~10–7 Ma) and the putative oldest migrations are recorded in the temperate region, where the number of GABI participants rapidly increases after ~5 Ma and this trend continues during the Pleistocene. A sampling bias toward higher latitudes and younger records challenges the study of the temporal and geographic patterns of the GABI. PMID:25601879

Architecture of portable electronic medical records system integrated with streaming media.

PubMed

Chen, Wei; Shih, Chien-Chou

2012-02-01

Due to increasing occurrence of accidents and illness during business trips, travel, or overseas studies, the requirement for portable EMR (Electronic Medical Records) has increased. This study proposes integrating streaming media technology into the EMR system to facilitate referrals, contracted laboratories, and disease notification among hospitals. The current study encoded static and dynamic medical images of patients into a streaming video format and stored them in a Flash Media Server (FMS). Based on the Taiwan Electronic Medical Record Template (TMT) standard, EMR records can be converted into XML documents and used to integrate description fields with embedded streaming videos. This investigation implemented a web-based portable EMR interchanging system using streaming media techniques to expedite exchanging medical image information among hospitals. The proposed architecture of the portable EMR retrieval system not only provides local hospital users the ability to acquire EMR text files from a previous hospital, but also helps access static and dynamic medical images as reference for clinical diagnosis and treatment. The proposed method protects property rights of medical images through information security mechanisms of the Medical Record Interchange Service Center and Health Certificate Authorization to facilitate proper, efficient, and continuous treatment of patients.

Effects of computer-based graphic organizers to solve one-step word problems for middle school students with mild intellectual disability: A preliminary study.

PubMed

Sheriff, Kelli A; Boon, Richard T

2014-08-01

The purpose of this study was to examine the effects of computer-based graphic organizers, using Kidspiration 3© software, to solve one-step word problems. Participants included three students with mild intellectual disability enrolled in a functional academic skills curriculum in a self-contained classroom. A multiple probe single-subject research design (Horner & Baer, 1978) was used to evaluate the effectiveness of computer-based graphic organizers to solving mathematical one-step word problems. During the baseline phase, the students completed a teacher-generated worksheet that consisted of nine functional word problems in a traditional format using a pencil, paper, and a calculator. In the intervention and maintenance phases, the students were instructed to complete the word problems using a computer-based graphic organizer. Results indicated that all three of the students improved in their ability to solve the one-step word problems using computer-based graphic organizers compared to traditional instructional practices. Limitations of the study and recommendations for future research directions are discussed. Copyright © 2014 Elsevier Ltd. All rights reserved.

75 FR 38606 - Temporary Closure of I-70 (I-70/I-465 West Leg Interchange to the I-70/I-65 South Split...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-07-02

... interchange to the I-70/I-65 south split interchange) on October 7, 2010, for a 12-hour period from 6 a.m. to... Mr. Robert Tally, FHWA Division Administrator-Indiana, (317) 226-7476. Office hours for FHWA are from...Rulemaking portal at: http://www.regulations.gov . The Web site is available 24 hours each day, 365 days each...

Total-dose radiation effects data for semiconductor devices. 1985 supplement. Volume 2, part A

NASA Technical Reports Server (NTRS)

Martin, K. E.; Gauthier, M. K.; Coss, J. R.; Dantas, A. R. V.; Price, W. E.

1986-01-01

Steady-state, total-dose radiation test data, are provided in graphic format for use by electronic designers and other personnel using semiconductor devices in a radiation environment. The data were generated by JPL for various NASA space programs. This volume provides data on integrated circuits. The data are presented in graphic, tabular, and/or narrative format, depending on the complexity of the integrated circuit. Most tests were done using the JPL or Boeing electron accelerator (Dynamitron) which provides a steady-state 2.5 MeV electron beam. However, some radiation exposures were made with a Cobalt-60 gamma ray source, the results of which should be regarded as only an approximate measure of the radiation damage that would be incurred by an equivalent electron dose.

MrEnt: an editor for publication-quality phylogenetic tree illustrations.

PubMed

Zuccon, Alessandro; Zuccon, Dario

2014-09-01

We developed MrEnt, a Windows-based, user-friendly software that allows the production of complex, high-resolution, publication-quality phylogenetic trees in few steps, directly from the analysis output. The program recognizes the standard Nexus tree format and the annotated tree files produced by BEAST and MrBayes. MrEnt combines in a single software a large suite of tree manipulation functions (e.g. handling of multiple trees, tree rotation, character mapping, node collapsing, compression of large clades, handling of time scale and error bars for chronograms) with drawing tools typical of standard graphic editors, including handling of graphic elements and images. The tree illustration can be printed or exported in several standard formats suitable for journal publication, PowerPoint presentation or Web publication. © 2014 John Wiley & Sons Ltd.

Effect of Message Format and Content on Attitude Accessibility Regarding Sexually Transmitted Infections.

PubMed

Jain, Parul; Hoffman, Eric; Beam, Michael; Xu, Shan Susan

2017-11-01

Sexually transmitted infections (STIs) are widespread in the United States among people ages 15-24 years and cost almost $16 billion yearly. It is therefore important to understand message design strategies that could help reduce these numbers. Guided by exemplification theory and the extended parallel process model (EPPM), this study examines the influence of message format and the presence versus absence of a graphic image on recipients' accessibility of STI attitudes regarding safe sex. Results of the experiment indicate a significant effect from testimonial messages on increased attitude accessibility regarding STIs compared to statistical messages. Results also indicate a conditional indirect effect of testimonial messages on STI attitude accessibility, though threat is greater when a graphic image is included. Implications and directions for future research are discussed.

Interfacing 1990 US Census TIGER map files with New S graphics software. [Topologically Integrated Geographic Encoding and Referencing (TIGER)

DOE Office of Scientific and Technical Information (OSTI.GOV)

Rizzardi, M.; Mohr, M.S.; Merrill, D.W.

1992-07-01

In 1990, the United States Bureau of the Census released detailed geographic base files known as TIGER/Line (Topologically Integrated Geographic Encoding and Referencing) which contain detail on the physical features and census tract boundaries of every county in the United States. The TIGER database is attractive for two reasons. First, it is publicly available through the Bureau of the Census on tape or cd-rom for a minimal fee. Second, it contains 24 billion characters of data which describe geographic features of interest to the Census Bureau such as coastlines, hydrography, transportation networks, political boundaries, etc. Unfortunately, the large TIGER databasemore » only provides raw alphanumeric data; no utility software, graphical or otherwise, is included. On the other hand New S, a popular statistical software package by AT T, has easily operated functions that permit advanced graphics in conjunction with data analysis. New S has the ability to plot contours, lines, segments, and points. However, of special interest is the New S function map and its options. Using the map function, which requires polygons as input, census tracts can be quickly selected, plotted, shaded, etc. New S graphics combined with the TIGER database has obvious potential. This paper reports on our efforts to use the TIGER map files with New S, especially to construct census tract maps of counties. While census tract boundaries are inherently polygonal, they are not organized as such in the TIGER database. This conversion of the TIGER line'' format into New S polygon/polyline'' format is one facet of the work reported here. Also we discuss the selection and extraction of auxiliary geographic information from TIGER files for graphical display using New S.« less

Interfacing 1990 US Census TIGER map files with New S graphics software

DOE Office of Scientific and Technical Information (OSTI.GOV)

Rizzardi, M.; Mohr, M.S.; Merrill, D.W.

1992-07-01

In 1990, the United States Bureau of the Census released detailed geographic base files known as TIGER/Line (Topologically Integrated Geographic Encoding and Referencing) which contain detail on the physical features and census tract boundaries of every county in the United States. The TIGER database is attractive for two reasons. First, it is publicly available through the Bureau of the Census on tape or cd-rom for a minimal fee. Second, it contains 24 billion characters of data which describe geographic features of interest to the Census Bureau such as coastlines, hydrography, transportation networks, political boundaries, etc. Unfortunately, the large TIGER databasemore » only provides raw alphanumeric data; no utility software, graphical or otherwise, is included. On the other hand New S, a popular statistical software package by AT&T, has easily operated functions that permit advanced graphics in conjunction with data analysis. New S has the ability to plot contours, lines, segments, and points. However, of special interest is the New S function map and its options. Using the map function, which requires polygons as input, census tracts can be quickly selected, plotted, shaded, etc. New S graphics combined with the TIGER database has obvious potential. This paper reports on our efforts to use the TIGER map files with New S, especially to construct census tract maps of counties. While census tract boundaries are inherently polygonal, they are not organized as such in the TIGER database. This conversion of the TIGER ``line`` format into New S ``polygon/polyline`` format is one facet of the work reported here. Also we discuss the selection and extraction of auxiliary geographic information from TIGER files for graphical display using New S.« less

Poster: Building a Large Tiled-Display Cluster

DTIC Science & Technology

2012-10-01

graphics cards ( Nvidia Quadro FX 5800), and each graphics ∗e-mail: mark.livingston@nrl.navy.mil †e-mail: jonathan.decker@nrl.navy.mil card in a display...such as DisplayPort and HDMI (see: Nvidia Quadro 6000). We recommend these formats because they are much easier to plug-and-play. 3.4 Leverage Open...will find yourself with all the issues related to owning a server room. Today, there are a number of companies offering turn-key so- lutions for tiled

Use of a simplified consent form to facilitate patient understanding of informed consent for laparoscopic cholecystectomy

PubMed Central

Borello, Alessandro; Passera, Roberto; Surace, Alessandra; Marola, Silvia; Buccelli, Claudio; Niola, Massimo; Di Lorenzo, Pierpaolo; Amato, Maurizio; Di Domenico, Lorenza; Solej, Mario; Martino, Valter

2016-01-01

Abstract Background Surgical informed consent forms can be complicated for patients to read and understand. We created a consent form with key information presented in bulleted texts and diagrams combined in a graphical format to facilitate the understanding of information during the verbal consent discussion. Methods This prospective, randomized study involved 70 adult patients awaiting cholecystectomy for gallstones. Consent was obtained after standard verbal explanation using either a graphically formatted (study group, n=33) or a standard text document (control group, n=37). Comprehension was evaluated with a 9-item multiple-choice questionnaire administered before surgery and factors affecting comprehension were analyzed. Results Comparison of questionnaire scores showed no effect of age, sex, time between consent and surgery, or document format on understanding of informed consent. Educational level was the only predictor of comprehension. Conclusions Simplified surgical consent documents meet the goals of health literacy and informed consent. Educational level appears to be a strong predictor of understanding. PMID:28352847

Use of a simplified consent form to facilitate patient understanding of informed consent for laparoscopic cholecystectomy.

PubMed

Borello, Alessandro; Ferrarese, Alessia; Passera, Roberto; Surace, Alessandra; Marola, Silvia; Buccelli, Claudio; Niola, Massimo; Di Lorenzo, Pierpaolo; Amato, Maurizio; Di Domenico, Lorenza; Solej, Mario; Martino, Valter

2016-01-01

Surgical informed consent forms can be complicated for patients to read and understand. We created a consent form with key information presented in bulleted texts and diagrams combined in a graphical format to facilitate the understanding of information during the verbal consent discussion. This prospective, randomized study involved 70 adult patients awaiting cholecystectomy for gallstones. Consent was obtained after standard verbal explanation using either a graphically formatted (study group, n=33) or a standard text document (control group, n=37). Comprehension was evaluated with a 9-item multiple-choice questionnaire administered before surgery and factors affecting comprehension were analyzed. Comparison of questionnaire scores showed no effect of age, sex, time between consent and surgery, or document format on understanding of informed consent. Educational level was the only predictor of comprehension. Simplified surgical consent documents meet the goals of health literacy and informed consent. Educational level appears to be a strong predictor of understanding.

The visual communication of risk.

PubMed

Lipkus, I M; Hollands, J G

1999-01-01

This paper 1) provides reasons why graphics should be effective aids to communicate risk; 2) reviews the use of visuals, especially graphical displays, to communicate risk; 3) discusses issues to consider when designing graphs to communicate risk; and 4) provides suggestions for future research. Key articles and materials were obtained from MEDLINE(R) and PsychInfo(R) databases, from reference article citations, and from discussion with experts in risk communication. Research has been devoted primarily to communicating risk magnitudes. Among the various graphical displays, the risk ladder appears to be a promising tool for communicating absolute and relative risks. Preliminary evidence suggests that people understand risk information presented in histograms and pie charts. Areas that need further attention include 1) applying theoretical models to the visual communication of risk, 2) testing which graphical displays can be applied best to different risk communication tasks (e.g., which graphs best convey absolute or relative risks), 3) communicating risk uncertainty, and 4) testing whether the lay public's perceptions and understanding of risk varies by graphical format and whether the addition of graphical displays improves comprehension substantially beyond numerical or narrative translations of risk and, if so, by how much. There is a need to ascertain the extent to which graphics and other visuals enhance the public's understanding of disease risk to facilitate decision-making and behavioral change processes. Nine suggestions are provided to help achieve these ends.

"Take This Brochure...": An Analysis of Current Educational Materials Given to Clients with Diabetes.

ERIC Educational Resources Information Center

McConnell-Imbriotis, Alison

2001-01-01

Format, graphics, and content of print materials for people with diabetes were analyzed. The materials do not encourage proactive self-direction, the information is not contextualized, and diabetes is not presented as systemic. More flexible and inclusive formats and media, use of analogies, and more diversity were recommended. (47 Contains…

Communication growth in minimally verbal children with ASD: The importance of interaction.

PubMed

DiStefano, Charlotte; Shih, Wendy; Kaiser, Ann; Landa, Rebecca; Kasari, Connie

2016-10-01

Little is known about language development in children with Autism Spectrum Disorders (ASD) who remain minimally verbal past age 5. While there is evidence that children can develop language after age 5, we lack detailed information. Studies of this population generally focus on discrete language skills without addressing broader social-communication abilities. As communication and social deficits are both inherent to ASD, an examination of not only what language skills are acquired, but how those skills are used in interactions is relevant. Research in typical development has examined how communication interchanges (unbroken back-and-forth exchanges around a unified purpose) develop, which can be used as a framework for studying minimally verbal children. This study examined the interchange use by 55 children with ASD over the course of a 6-month play and engagement-based communication intervention. Half of the children received intervention sessions that also incorporated a speech-generating device (SGD). Interchanges were coded by: frequency, length, function, and initiator (child or adult). Results indicated that children initiated a large proportion of interchanges and this proportion increased over time. The average length and number of interchanges increased over time, with children in the SGD group showing even greater growth. Finally, children's total number of interchanges at baseline was positively associated with their spoken language gains over the course of intervention. This study supports the crucial relationship between social engagement and expressive language development, and highlights the need to include sustained communication interchanges as a target for intervention with this population. Autism Res 2016, 9: 1093-1102. © 2016 International Society for Autism Research, Wiley Periodicals, Inc. © 2016 International Society for Autism Research, Wiley Periodicals, Inc.

Automatic 3D high-fidelity traffic interchange modeling using 2D road GIS data

NASA Astrophysics Data System (ADS)

Wang, Jie; Shen, Yuzhong

2011-03-01

3D road models are widely used in many computer applications such as racing games and driving simulations. However, almost all high-fidelity 3D road models were generated manually by professional artists at the expense of intensive labor. There are very few existing methods for automatically generating 3D high-fidelity road networks, especially for those existing in the real world. Real road network contains various elements such as road segments, road intersections and traffic interchanges. Among them, traffic interchanges present the most challenges to model due to their complexity and the lack of height information (vertical position) of traffic interchanges in existing road GIS data. This paper proposes a novel approach that can automatically produce 3D high-fidelity road network models, including traffic interchange models, from real 2D road GIS data that mainly contain road centerline information. The proposed method consists of several steps. The raw road GIS data are first preprocessed to extract road network topology, merge redundant links, and classify road types. Then overlapped points in the interchanges are detected and their elevations are determined based on a set of level estimation rules. Parametric representations of the road centerlines are then generated through link segmentation and fitting, and they have the advantages of arbitrary levels of detail with reduced memory usage. Finally a set of civil engineering rules for road design (e.g., cross slope, superelevation) are selected and used to generate realistic road surfaces. In addition to traffic interchange modeling, the proposed method also applies to other more general road elements. Preliminary results show that the proposed method is highly effective and useful in many applications.

Successful implementation of a P&T-approved therapeutic interchange program of angiotensin II receptor blockers in a medical center in Taiwan.

PubMed

Lee, Yen-Ying; Hsiao, Paul; Lin, You-Meei; Yen, Yu-Hsuan; Chen, Hsiang-Yin

2012-01-01

Therapeutic interchange is not a common practice in the medical society in Asia. We used clinic blood pressure readings, patients' tolerance, and cost saving as measures to evaluate the impact of a therapeutic interchange program implemented at a medical center in Taiwan. Taipei Medical University-Wan Fang Hospital initiated a therapeutic interchange program involving angiotensin II receptor blockers (ARBs). Data were retrospectively collected for 444 outpatients who were converted from other ARBs to candesartan. Evaluation of therapeutic efficacy, adverse effects associated with therapy, and drug costs was conducted before and after the program implementation. Patients whose treatment was converted to candesartan experienced no statistically significant differences in blood pressure, and the average number of antihypertensive agents used per patient remained unchanged. A direct cost savings of US$62,237 was estimated for the 444 patients studied. Only 3.15% of the patients developed adverse drug reactions potentially related to candesartan, and none required hospitalization. Based on the results of this retrospective chart review, the present ARB therapeutic interchange program was successfully developed and implemented. This is the first study to establish the positive impact of a well-run ARB therapeutic interchange program in Taiwan. Copyright © 2012 International Society for Pharmacoeconomics and Outcomes Research (ISPOR). Published by Elsevier Inc. All rights reserved.

Development of the Plate Tectonics and Seismology markup languages with XML

NASA Astrophysics Data System (ADS)

Babaie, H.; Babaei, A.

2003-04-01

The Extensible Markup Language (XML) and its specifications such as the XSD Schema, allow geologists to design discipline-specific vocabularies such as Seismology Markup Language (SeismML) or Plate Tectonics Markup Language (TectML). These languages make it possible to store and interchange structured geological information over the Web. Development of a geological markup language requires mapping geological concepts, such as "Earthquake" or "Plate" into a UML object model, applying a modeling and design environment. We have selected four inter-related geological concepts: earthquake, fault, plate, and orogeny, and developed four XML Schema Definitions (XSD), that define the relationships, cardinalities, hierarchies, and semantics of these concepts. In such a geological concept model, the UML object "Earthquake" is related to one or more "Wave" objects, each arriving to a seismic station at a specific "DateTime", and relating to a specific "Epicenter" object that lies at a unique "Location". The "Earthquake" object occurs along a "Segment" of a "Fault" object, which is related to a specific "Plate" object. The "Fault" has its own associations with such things as "Bend", "Step", and "Segment", and could be of any kind (e.g., "Thrust", "Transform'). The "Plate" is related to many other objects such as "MOR", "Subduction", and "Forearc", and is associated with an "Orogeny" object that relates to "Deformation" and "Strain" and several other objects. These UML objects were mapped into XML Metadata Interchange (XMI) formats, which were then converted into four XSD Schemas. The schemas were used to create and validate the XML instance documents, and to create a relational database hosting the plate tectonics and seismological data in the Microsoft Access format. The SeismML and TectML allow seismologists and structural geologists, among others, to submit and retrieve structured geological data on the Internet. A seismologist, for example, can submit peer-reviewed and reliable data about a specific earthquake to a Java Server Page on our web site hosting the XML application. Other geologists can readily retrieve the submitted data, saved in files or special tables of the designed database, through a search engine designed with J2EE (JSP, servlet, Java Bean) and XML specifications such as XPath, XPointer, and XSLT. When extended to include all the important concepts of seismology and plate tectonics, the two markup languages will make global interchange of geological data a reality.

Laboratory arc furnace features interchangeable hearths

NASA Technical Reports Server (NTRS)

Armstrong, J. L.; Kruger, O. L.

1967-01-01

Laboratory arc furnace using rapidly interchangeable hearths gains considerable versatility in casting so that buttons or special shaped castings can be produced. It features a sight glass for observation.

Bicoherence Analysis of Electrostatic Interchange Mode Coupling in a Turbulent Laboratory Magnetosphere

NASA Astrophysics Data System (ADS)

Abler, M. C.; Saperstein, A.; Yan, J. R.; Mauel, M. E.

2017-10-01

Plasmas confined by a strong dipole field exhibit interchange and entropy mode turbulence, which previous experiments have shown respond locally to active feedback. On the Collisionless Terrella Experiment (CTX), this turbulence is characterized by low frequency, low order, quasi-coherent modes with complex spectral dynamics. We apply bicoherence analysis to study nonlinear phase coupling in a variety of scenarios. First, we study the self-interaction of the naturally occurring interchange turbulence; this analysis is then expanded to include the effects of driven modes in the frequency range of the background turbulent oscillations. Initial measurements of coupling coefficients are presented in both cases. Driven low frequency interchange modes are observed to generate multiple harmonics which persist throughout the plasma, becoming weaker as they propagate away from the actuator in the direction of the electron magnetic drift. Future work is also discussed, including application of wavelet bicoherence analysis, excitation of interchange modes at multiple frequencies, and applications to planetary magnetospheres. Supported by NSF-DOE Partnership for Plasma Science Grants DOE-DE-FG02-00ER54585.

Ground-motion variability resulting from the January 17, 1994, M = 6.6 Northridge earthquake at the interchange between highways 14 and I-5 in the northern San Fernando Valley

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hutchings, L.; Jarpe, S.; Kasameyer, P.

1994-02-04

Lawrence Livermore National Laboratory responded to the 17 January 1994, Northridge earthquake by sending an information gathering team to observe and study the collapse of the interchange between highways 14 and I-5 in the northern San Fernando Valley. This field team examined the structural failure at the interchange and the surface soil conditions, and they installed high-grain RefTek seismic recorders to record aftershocks. We recorded aftershocks for two weeks. Analyses of aftershock recordings in this report illustrate the degree of differential support motion for this site, and the higher than expected ground motion from an earthquake of this size andmore » distance. We used the aftershock recordings of small earthquakes as empirical Green`s functions and synthesized strong ground motion at three sites in the interchange area. Results presented here are based on an assumption that the geology of the interchange area remained linear in its response to the main event.« less

Interchangeability of biosimilar and biological reference product: updated regulatory positions and pre- and post-marketing evidence.

PubMed

Trifirò, Gianluca; Marcianò, Ilaria; Ingrasciotta, Ylenia

2018-03-01

Since 2006, biosimilars have been available in several countries worldwide, thus allowing for potential savings in pharmaceutical expenditure. However, there have been numerous debates about the interchangeability of biosimilars and reference products based on concerns of immunogenicity by switching between biological products, which may cause lack of effect and toxicity. Areas covered: The authors provide the reader with an overview of the different positions of regulatory authorities on the interchangeability and automatic substitution of biosimilars and reference products. Presently, the FDA allows automatic substitution without prescriber intervention if the biosimilar is interchangeable with reference products, while the European Medicines Agency delegate to each single EU member state. Expert opinion: Different approaches in defining interchangeability and automatic substitution call for harmonization to increase confidence of healthcare professionals and patients about the clinical impact of switching. Networks of electronic healthcare records and administrative databases, potentially linkable to clinical charts and registries may rapidly assess frequency and benefit-risk profile of different switching patterns in routine care at different levels, thus integrating and strengthening pre-marketing evidence.

A uniform input data convention for the CALL 3-D crash victim simulation

NASA Astrophysics Data System (ADS)

Shaibani, S. J.

1982-07-01

Logical schemes for the labelling of planes (cards D) and functions (cards E) in the input decks used for the Calspan 3-D Crash Victim Simulation (CVS) program are proposed. One benefit of introducing such a standardized format for these inputs would be to facilitate greatly the interchange of data for different vehicles. A further advantage would be that the table of allowed contacts (cards F) could remain largely unaltered. It is hoped that the uniformity of the convention described by these schemes would help to promote the exchange of readily usable data between CVS users.

Report on the Second Catalog Interoperability Workshop

NASA Technical Reports Server (NTRS)

Thieman, James R.; James, Mary E.

1988-01-01

The events, resolutions, and recommendations of the Second Catalog Interoperability Workshop, held at JPL in January, 1988, are discussed. This workshop dealt with the issues of standardization and communication among directories, catalogs, and inventories in the earth and space science data management environment. The Directory Interchange Format, being constructed as a standard for the exchange of directory information among participating data systems, is discussed. Involvement in the Interoperability effort by NASA, NOAA, ISGS, and NSF is described, and plans for future interoperability considered. The NASA Master Directory prototype is presented and critiqued and options for additional capabilities debated.

GEMPAK 5.1 - A GENERAL METEOROLOGICAL PACKAGE (UNIX VERSION)

NASA Technical Reports Server (NTRS)

Desjardins, M. L.

1994-01-01

GEMPAK is a general meteorological software package developed at NASA/Goddard Space Flight Center. It includes programs to analyze and display surface, upper-air, and gridded data, including model output. There are very general programs to list, edit, and plot data on maps, to display profiles and time series, to draw and fill contours, to draw streamlines, to plot symbols for clouds, sky cover, and pressure tendency, and draw cross sections in the case of gridded data and sounding data. In addition, there are Barnes objective analysis programs to grid surface and upper-air data. The programs include the capabilities to derive meteorological parameters from those found in the dataset, to perform vertical interpolations of sounding data to different coordinate systems, and to compute an extensive set of gridded diagnostic quantities by specifying various nested combinations of scalars and vector arithmetic, algebraic, and differential operators. The GEMPAK 5.1 graphics/transformation subsystem, GEMPLT, provides device-independent graphics. GEMPLT also has the capability to display output in a variety of map projections or overlaid on satellite imagery. GEMPAK 5.1 is written in FORTRAN 77 and C-language and has been implemented on VAX computers under VMS and on computers running the UNIX operating system. During installation and normal use, this package occupies approximately 100Mb of hard disk space. The UNIX version of GEMPAK includes drivers for several graphic output systems including MIT's X Window System (X11,R4), Sun GKS, PostScript (color and monochrome), Silicon Graphics, and others. The VMS version of GEMPAK also includes drivers for several graphic output systems including PostScript (color and monochrome). The VMS version is delivered with the object code for the Transportable Applications Environment (TAE) program, version 4.1 which serves as a user interface. A color monitor is recommended for displaying maps on video display devices. Data for rendering regional maps is included with this package. The standard distribution medium for the UNIX version of GEMPAK 5.1 is a .25 inch streaming magnetic tape cartridge in UNIX tar format. The standard distribution medium for the VMS version of GEMPAK 5.1 is a 6250 BPI 9-track magnetic tape in DEC VAX BACKUP format. The VMS version is also available on a TK50 tape cartridge in DEC VAX BACKUP format. This program was developed in 1985. The current version, GEMPAK 5.1, was released in 1992. The package is delivered with source code. An extensive collection of subroutine libraries allows users to format data for use by GEMPAK, to develop new programs, and to enhance existing ones.

Accident data availability

DOT National Transportation Integrated Search

2000-06-01

This project investigates alternate forms of dissemination for the accident information. Costs, capabilities, and compatibility are reviewed for integration of the accident database with a GIS format to allow a graphical and spatial interface. the is...

Enhanced biofilm formation and melanin synthesis by the oyster settlement-promoting Shewanella colwelliana is related to hydrophobic surface and simulated intertidal environment.

PubMed

Mitra, Sayani; Gachhui, Ratan; Mukherjee, Joydeep

2015-01-01

A direct relationship between biofilm formation and melanogenesis in Shewanella colwelliana with increased oyster recruitment is already established. Previously, S. colwelliana was grown in a newly patented biofilm-cultivation device, the conico-cylindrical flask (CCF), offering interchangeable hydrophobic/hydrophilic surfaces. Melanization was enhanced when S. colwelliana was cultivated in a hydrophobic vessel compared with a hydrophilic vessel. In the present study, melanogenesis in the CCF was positively correlated with increased architectural parameters of the biofilm (mean thickness and biovolume obtained by confocal laser scanning microscopy) and melanin gene (melA) expression observed by densitometry. Niche intertidal conditions were mimicked in a process operated in an ultra-low-speed rotating disk bioreactor, which demonstrated enhanced biofilm formation, melanogenesis, exopolysaccharide synthesis and melA gene expression compared with a process where 12-h periodic immersion and emersion was prevented. The wettability properties of the settling plane as well as intermittent wetting and drying, which influenced biofilm formation and melA expression, may affect oyster settlement in nature.

The electromagnetic interchange mode in a partially ionized collisional plasma. [spread F region

NASA Technical Reports Server (NTRS)

Hudson, M. K.; Kennel, C. F.

1974-01-01

A collisional electromagnetic dispersion relation is derived from two-fluid theory for the interchange mode coupled to the Alfven, acoustic, drift and entropy modes in a partially ionized plasma. The fundamental electromagnetic nature of the interchange model is noted; coupling to the intermediate Alfven mode is strongly stabilizing for finite k sub z. Both ion viscous and ion-neutral stabilization are included, and it was found that collisions destroy the ion finite Larmor radius cutoff at short perpendicular wavelengths.

ToxPi Graphical User Interface 2.0: Dynamic exploration, visualization, and sharing of integrated data models.

PubMed

Marvel, Skylar W; To, Kimberly; Grimm, Fabian A; Wright, Fred A; Rusyn, Ivan; Reif, David M

2018-03-05

Drawing integrated conclusions from diverse source data requires synthesis across multiple types of information. The ToxPi (Toxicological Prioritization Index) is an analytical framework that was developed to enable integration of multiple sources of evidence by transforming data into integrated, visual profiles. Methodological improvements have advanced ToxPi and expanded its applicability, necessitating a new, consolidated software platform to provide functionality, while preserving flexibility for future updates. We detail the implementation of a new graphical user interface for ToxPi (Toxicological Prioritization Index) that provides interactive visualization, analysis, reporting, and portability. The interface is deployed as a stand-alone, platform-independent Java application, with a modular design to accommodate inclusion of future analytics. The new ToxPi interface introduces several features, from flexible data import formats (including legacy formats that permit backward compatibility) to similarity-based clustering to options for high-resolution graphical output. We present the new ToxPi interface for dynamic exploration, visualization, and sharing of integrated data models. The ToxPi interface is freely-available as a single compressed download that includes the main Java executable, all libraries, example data files, and a complete user manual from http://toxpi.org .

Guiding principles for printed education materials: design preferences of people with aphasia.

PubMed

Rose, Tanya A; Worrall, Linda E; Hickson, Louise M; Hoffmann, Tammy C

2012-02-01

The objectives of this study were to obtain the preferences of people with aphasia for the design of stroke and aphasia printed education materials (PEMs) and to compare these preferences with recommendations in the literature for developing written information for other populations. A face-to-face quantitative questionnaire was completed with 40 adults with aphasia post-stroke. The questionnaire explored preferences for: (1) the representation of numbers, (2) font size and type, (3) line spacing, (4) document length, and (5) graphic type. Most preferences (62.4%, n = 146) were for numbers expressed as figures rather than words. The largest proportion of participants selected 14 point (28.2%, n = 11) and Verdana ref (33.3%, n = 13) as the easiest font size and type to read, and a preference for 1.5 line spacing (41.0%, n = 16) was identified. Preference for document length was not related to the participant's reading ability or aphasia severity. Most participants (95.0%, n = 38) considered graphics to be helpful, with photographs more frequently reported as a helpful graphic type. The identified preferences support many of the formatting recommendations found within the literature. This research provides guiding principles for developing PEMs in preferred formats for people with aphasia.

The UCSC genome browser and associated tools

PubMed Central

Haussler, David; Kent, W. James

2013-01-01

The UCSC Genome Browser (http://genome.ucsc.edu) is a graphical viewer for genomic data now in its 13th year. Since the early days of the Human Genome Project, it has presented an integrated view of genomic data of many kinds. Now home to assemblies for 58 organisms, the Browser presents visualization of annotations mapped to genomic coordinates. The ability to juxtapose annotations of many types facilitates inquiry-driven data mining. Gene predictions, mRNA alignments, epigenomic data from the ENCODE project, conservation scores from vertebrate whole-genome alignments and variation data may be viewed at any scale from a single base to an entire chromosome. The Browser also includes many other widely used tools, including BLAT, which is useful for alignments from high-throughput sequencing experiments. Private data uploaded as Custom Tracks and Data Hubs in many formats may be displayed alongside the rich compendium of precomputed data in the UCSC database. The Table Browser is a full-featured graphical interface, which allows querying, filtering and intersection of data tables. The Saved Session feature allows users to store and share customized views, enhancing the utility of the system for organizing multiple trains of thought. Binary Alignment/Map (BAM), Variant Call Format and the Personal Genome Single Nucleotide Polymorphisms (SNPs) data formats are useful for visualizing a large sequencing experiment (whole-genome or whole-exome), where the differences between the data set and the reference assembly may be displayed graphically. Support for high-throughput sequencing extends to compact, indexed data formats, such as BAM, bigBed and bigWig, allowing rapid visualization of large datasets from RNA-seq and ChIP-seq experiments via local hosting. PMID:22908213

The UCSC genome browser and associated tools.

PubMed

Kuhn, Robert M; Haussler, David; Kent, W James

2013-03-01

The UCSC Genome Browser (http://genome.ucsc.edu) is a graphical viewer for genomic data now in its 13th year. Since the early days of the Human Genome Project, it has presented an integrated view of genomic data of many kinds. Now home to assemblies for 58 organisms, the Browser presents visualization of annotations mapped to genomic coordinates. The ability to juxtapose annotations of many types facilitates inquiry-driven data mining. Gene predictions, mRNA alignments, epigenomic data from the ENCODE project, conservation scores from vertebrate whole-genome alignments and variation data may be viewed at any scale from a single base to an entire chromosome. The Browser also includes many other widely used tools, including BLAT, which is useful for alignments from high-throughput sequencing experiments. Private data uploaded as Custom Tracks and Data Hubs in many formats may be displayed alongside the rich compendium of precomputed data in the UCSC database. The Table Browser is a full-featured graphical interface, which allows querying, filtering and intersection of data tables. The Saved Session feature allows users to store and share customized views, enhancing the utility of the system for organizing multiple trains of thought. Binary Alignment/Map (BAM), Variant Call Format and the Personal Genome Single Nucleotide Polymorphisms (SNPs) data formats are useful for visualizing a large sequencing experiment (whole-genome or whole-exome), where the differences between the data set and the reference assembly may be displayed graphically. Support for high-throughput sequencing extends to compact, indexed data formats, such as BAM, bigBed and bigWig, allowing rapid visualization of large datasets from RNA-seq and ChIP-seq experiments via local hosting.

User-centered design of quality of life reports for clinical care of patients with prostate cancer

PubMed Central

Izard, Jason; Hartzler, Andrea; Avery, Daniel I.; Shih, Cheryl; Dalkin, Bruce L.; Gore, John L.

2014-01-01

Background Primary treatment of localized prostate cancer can result in bothersome urinary, sexual, and bowel symptoms. Yet clinical application of health-related quality-of-life (HRQOL) questionnaires is rare. We employed user-centered design to develop graphic dashboards of questionnaire responses from patients with prostate cancer to facilitate clinical integration of HRQOL measurement. Methods We interviewed 50 prostate cancer patients and 50 providers, assessed literacy with validated instruments (Rapid Estimate of Adult Literacy in Medicine short form, Subjective Numeracy Scale, Graphical Literacy Scale), and presented participants with prototype dashboards that display prostate cancer-specific HRQOL with graphic elements derived from patient focus groups. We assessed dashboard comprehension and preferences in table, bar, line, and pictograph formats with patient scores contextualized with HRQOL scores of similar patients serving as a comparison group. Results Health literacy (mean score, 6.8/7) and numeracy (mean score, 4.5/6) of patient participants was high. Patients favored the bar chart (mean rank, 1.8 [P = .12] vs line graph [P <.01] vs table and pictograph); providers demonstrated similar preference for table, bar, and line formats (ranked first by 30%, 34%, and 34% of providers, respectively). Providers expressed unsolicited concerns over presentation of comparison group scores (n = 19; 38%) and impact on clinic efficiency (n = 16; 32%). Conclusion Based on preferences of prostate cancer patients and providers, we developed the design concept of a dynamic HRQOL dashboard that permits a base patient-centered report in bar chart format that can be toggled to other formats and include error bars that frame comparison group scores. Inclusion of lower literacy patients may yield different preferences. PMID:24787105

User-centered design of quality of life reports for clinical care of patients with prostate cancer.

PubMed

Izard, Jason; Hartzler, Andrea; Avery, Daniel I; Shih, Cheryl; Dalkin, Bruce L; Gore, John L

2014-05-01

Primary treatment of localized prostate cancer can result in bothersome urinary, sexual, and bowel symptoms. Yet clinical application of health-related quality-of-life (HRQOL) questionnaires is rare. We employed user-centered design to develop graphic dashboards of questionnaire responses from patients with prostate cancer to facilitate clinical integration of HRQOL measurement. We interviewed 50 prostate cancer patients and 50 providers, assessed literacy with validated instruments (Rapid Estimate of Adult Literacy in Medicine short form, Subjective Numeracy Scale, Graphical Literacy Scale), and presented participants with prototype dashboards that display prostate cancer-specific HRQOL with graphic elements derived from patient focus groups. We assessed dashboard comprehension and preferences in table, bar, line, and pictograph formats with patient scores contextualized with HRQOL scores of similar patients serving as a comparison group. Health literacy (mean score, 6.8/7) and numeracy (mean score, 4.5/6) of patient participants was high. Patients favored the bar chart (mean rank, 1.8 [P = .12] vs line graph [P < .01] vs table and pictograph); providers demonstrated similar preference for table, bar, and line formats (ranked first by 30%, 34%, and 34% of providers, respectively). Providers expressed unsolicited concerns over presentation of comparison group scores (n = 19; 38%) and impact on clinic efficiency (n = 16; 32%). Based on preferences of prostate cancer patients and providers, we developed the design concept of a dynamic HRQOL dashboard that permits a base patient-centered report in bar chart format that can be toggled to other formats and include error bars that frame comparison group scores. Inclusion of lower literacy patients may yield different preferences. Copyright © 2014 Mosby, Inc. All rights reserved.

Clinical outcomes associated with brand-to-generic phenytoin interchange.

PubMed

Kinikar, Shilpa A; Delate, Thomas; Menaker-Wiener, C Mindy; Bentley, William H

2012-05-01

Concerns that antiepileptic brand-to-generic interchange results in disruption of seizure control are widespread. However, little within-patient evidence exists examining such interchanges. To compare within-patient seizure control before and after the interchange of a branded to a single-source generic phenytoin among patients with seizures in a managed care organization. This was a pre-post, self-controlled, retrospective study. Adults with a history of seizure who used Dilantin Kapseals 100 mg extended phenytoin sodium, USP, capsules and whose therapy was interchanged to Taro Pharmaceuticals' AB-rated generic extended phenytoin sodium capsules, USP, 100 mg between July 2007 and May 2008 were included. Study outcomes included the comparisons of the proportions of patients with at least emergency department (ED) visit/inpatient hospitalization and medical office visit/nonoffice consultation for acute seizure in the 6 months before and after interchange. Outcomes were confirmed with manual chart reviews and adjusted for potential confounding medication use. A total of 222 patients were included in the study. Patients were primarily middle-aged (mean 56 years), equally mixed by sex (47% female); most had nonintractable seizures. The majority of patients (~70%) were on phenytoin as monotherapy and had equivalent rates of purchases for potentially confounding medications in both pre- and postinterchange time periods (all p > 0.05). Low serum concentrations were detected more often in the postinterchange study period (adjusted p < 0.001). Despite this, there were low proportions of patients with confirmed seizure events that resulted in an ED visit/inpatient hospitalization in both pre- and postinterchange periods (both 6.3%, adjusted p = 0.937). The proportion of patients with confirmed seizure events diagnosed at a medical office visit was not significantly different between the preinterchange and postinterchange periods (12.2% vs 11.3%, adjusted p = 0.545). No increased proportion of seizures was observed within patients when branded phenytoin was interchanged to an AB-rated, single-source, generic equivalent. More rigorous studies should be conducted to more thoroughly evaluate patient tolerability and drug efficacy when antiepileptic drugs are interchanged from brand to generic formulations.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Moussa, Sana Ben; Bachouâ, Hassen; Gruselle, Michel, E-mail: michel.gruselle@upmc.fr

The present article details the formation of calcium hydroxyapatite synthesized by the hydrothermal way, in presence of glycine or sarcosine. The presence of these amino-acids during the synthetic processes reduces the crystalline growthing through the formation of hybrid organic-inorganic species The crystallite sizes are decreasing and the morphology is modified with the increase of the amino-acid concentration. - Graphical abstract: Formation of Ca carboxylate salt leading to the grafting of glycine and sarcosine on the Ca=Hap surface (R= H, CH3).

The role of driver age in performance and attention allocation effects of roadway sign count, format and familiarity.

PubMed

Zahabi, Maryam; Machado, Patricia; Pankok, Carl; Lau, Mei Ying; Liao, Yi-Fan; Hummer, Joseph; Rasdorf, William; Kaber, David B

2017-09-01

White-on-blue logo signs are used to inform drivers of food, gas, lodging, and attraction businesses at highway interchanges. In this study, 60 drivers were asked to look for food and attraction targets on logo signs while driving in a realistic freeway simulation. The objective of the study was to quantify effects of the number of sign panels (six vs. nine), logo familiarity (familiar vs. unfamiliar), logo format (text vs. pictorial), and driver age (young, middle, and elderly) on performance, attention allocation and target identification accuracy. Results revealed elderly drivers to exhibit worse performance in comparison to middle-age and young groups even though they adopted a more conservative driving strategy. There was no significant effect of the number of panels, logo familiarity, and logo format on driver performance or attention allocation. In target identification, drivers were more accurate with familiar or text-based panels appearing in six-panel signs. Copyright © 2017 Elsevier Ltd. All rights reserved.

17 CFR 232.302 - Signatures.

Code of Federal Regulations, 2010 CFR

2010-04-01

...) must be in typed form rather than manual format. Signatures in an HTML document that are not required may, but are not required to, be presented in an HTML graphic or image file within the electronic...

17 CFR 229.1121 - (Item 1121) Distribution and pool performance information.

Code of Federal Regulations, 2010 CFR

2010-04-01

... may be found). Present statistical information in tabular or graphical format, if such presentation... realization rates. (9) Delinquency and loss information for the period. In addition, describe any material...

Chapter 6. Tabular data and graphical images in support of the U.S. Geological Survey National Oil and Gas Assessment-East Texas basin and Louisiana-Mississippi salt basins provinces, Jurassic Smackover interior salt basins total petroleum system (504902), Travis Peak and Hosston formations.

USGS Publications Warehouse

,

2006-01-01

This chapter describes data used in support of the process being applied by the U.S. Geological Survey (USGS) National Oil and Gas Assessment (NOGA) project. Digital tabular data used in this report and archival data that permit the user to perform further analyses are available elsewhere on the CD-ROM. Computers and software may import the data without transcription from the Portable Document Format files (.pdf files) of the text by the reader. Because of the number and variety of platforms and software available, graphical images are provided as .pdf files and tabular data are provided in a raw form as tab-delimited text files (.tab files).

Database Performance Monitoring for the Photovoltaic Systems

DOE Office of Scientific and Technical Information (OSTI.GOV)

Klise, Katherine A.

The Database Performance Monitoring (DPM) software (copyright in processes) is being developed at Sandia National Laboratories to perform quality control analysis on time series data. The software loads time indexed databases (currently csv format), performs a series of quality control tests defined by the user, and creates reports which include summary statistics, tables, and graphics. DPM can be setup to run on an automated schedule defined by the user. For example, the software can be run once per day to analyze data collected on the previous day. HTML formatted reports can be sent via email or hosted on a website.more » To compare performance of several databases, summary statistics and graphics can be gathered in a dashboard view which links to detailed reporting information for each database. The software can be customized for specific applications.« less

Report to the Nation on Crime and Justice and Technical Appendix. Second Edition.

ERIC Educational Resources Information Center

Department of Justice, Washington, DC. Bureau of Justice Statistics.

This report on crime and justice aims to present statistical information in a format that can be easily understood by a nontechnical audience. It uses graphics and a nontechnical format to bring together data from the Bureau of Justice Statistics, the Federal Bureau of Investigation Uniform Crime Reports, the Bureau of the Census, the National…

Bilingual Knowledge Maps (BiK Maps) as a Presentation Format: Delayed Recall and Training Effects

ERIC Educational Resources Information Center

Bahr, G. Sussane; Dansereau, Donald F.

2005-01-01

The use of bilingual graphic organizers (bilingual knowledge maps [BiK maps]) as a presentation format was investigated for the acquisition of foreign language vocabulary. Participants were assigned to 1 of 4 conditions for the task of studying 32 German-English word pairs. Participants in each condition were trained on either lists or BiK maps…

Are prescription drug insurance choices consistent with expected utility theory?

PubMed

Bundorf, M Kate; Mata, Rui; Schoenbaum, Michael; Bhattacharya, Jay

2013-09-01

To determine the extent to which people make choices inconsistent with expected utility theory when choosing among prescription drug insurance plans and whether tabular or graphical presentation format influences the consistency of their choices. Members of an Internet-enabled panel chose between two Medicare prescription drug plans. The "low variance" plan required higher out-of-pocket payments for the drugs respondents usually took but lower out-of-pocket payments for the drugs they might need if they developed a new health condition than the "high variance" plan. The probability of a change in health varied within subjects and the presentation format (text vs. graphical) and the affective salience of the clinical condition (abstract vs. risk related to specific clinical condition) varied between subjects. Respondents were classified based on whether they consistently chose either the low or high variance plan. Logistic regression models were estimated to examine the relationship between decision outcomes and task characteristics. The majority of respondents consistently chose either the low or high variance plan, consistent with expected utility theory. Half of respondents consistently chose the low variance plan. Respondents were less likely to make discrepant choices when information was presented in graphical format. Many people, although not all, make choices consistent with expected utility theory when they have information on differences among plans in the variance of out-of-pocket spending. Medicare beneficiaries would benefit from information on the extent to which prescription drug plans provide risk protection. PsycINFO Database Record (c) 2013 APA, all rights reserved.

Using graph-based assessments within socratic tutorials to reveal and refine students' analytical thinking about molecular networks.

PubMed

Trujillo, Caleb; Cooper, Melanie M; Klymkowsky, Michael W

2012-01-01

Biological systems, from the molecular to the ecological, involve dynamic interaction networks. To examine student thinking about networks we used graphical responses, since they are easier to evaluate for implied, but unarticulated assumptions. Senior college level molecular biology students were presented with simple molecular level scenarios; surprisingly, most students failed to articulate the basic assumptions needed to generate reasonable graphical representations; their graphs often contradicted their explicit assumptions. We then developed a tiered Socratic tutorial based on leading questions designed to provoke metacognitive reflection. The activity is characterized by leading questions (prompts) designed to provoke meta-cognitive reflection. When applied in a group or individual setting, there was clear improvement in targeted areas. Our results highlight the promise of using graphical responses and Socratic prompts in a tutorial context as both a formative assessment for students and an informative feedback system for instructors, in part because graphical responses are relatively easy to evaluate for implied, but unarticulated assumptions. Copyright © 2011 Wiley Periodicals, Inc.

Limit Interchange and L'Hopital's Rule

ERIC Educational Resources Information Center

Ecker, Michael W.

2011-01-01

Conventional application of these two calculus staples is stretched here, somewhat recreationally, but also to raise solid questions about the role of limit interchange in analysis--without, however, delving any deeper than first-year Calculus.

Design and operation of diamond interchanges.

DOT National Transportation Integrated Search

1961-08-01

This report is a presentation of results obtained from research studies on : diamond interchanges conducted by the Texas Transportation Institute in cooperation with the Texas Highway Department. These studies were conducted : in connection with Rese...

Cone penetrometer comparison testing.

DOT National Transportation Integrated Search

2011-01-01

A total of 61 cone penetration tests were performed at 14 sites in the state of Wisconsin. Data : reinforced conclusions from practice in Minnesota and previously performed test programs : related to the Marquette Interchange and Mitchell interchange...

Statistical Validation for Clinical Measures: Repeatability and Agreement of Kinect™-Based Software

PubMed Central

Tello, Emanuel; Rodrigo, Alejandro; Valentinuzzi, Max E.

2018-01-01

Background The rehabilitation process is a fundamental stage for recovery of people's capabilities. However, the evaluation of the process is performed by physiatrists and medical doctors, mostly based on their observations, that is, a subjective appreciation of the patient's evolution. This paper proposes a tracking platform of the movement made by an individual's upper limb using Kinect sensor(s) to be applied for the patient during the rehabilitation process. The main contribution is the development of quantifying software and the statistical validation of its performance, repeatability, and clinical use in the rehabilitation process. Methods The software determines joint angles and upper limb trajectories for the construction of a specific rehabilitation protocol and quantifies the treatment evolution. In turn, the information is presented via a graphical interface that allows the recording, storage, and report of the patient's data. For clinical purposes, the software information is statistically validated with three different methodologies, comparing the measures with a goniometer in terms of agreement and repeatability. Results The agreement of joint angles measured with the proposed software and goniometer is evaluated with Bland-Altman plots; all measurements fell well within the limits of agreement, meaning interchangeability of both techniques. Additionally, the results of Bland-Altman analysis of repeatability show 95% confidence. Finally, the physiotherapists' qualitative assessment shows encouraging results for the clinical use. Conclusion The main conclusion is that the software is capable of offering a clinical history of the patient and is useful for quantification of the rehabilitation success. The simplicity, low cost, and visualization possibilities enhance the use of the software Kinect for rehabilitation and other applications, and the expert's opinion endorses the choice of our approach for clinical practice. Comparison of the new measurement technique with established goniometric methods determines that the proposed software agrees sufficiently to be used interchangeably. PMID:29750166

JaxoDraw: A graphical user interface for drawing Feynman diagrams

NASA Astrophysics Data System (ADS)

Binosi, D.; Theußl, L.

2004-08-01

JaxoDraw is a Feynman graph plotting tool written in Java. It has a complete graphical user interface that allows all actions to be carried out via mouse click-and-drag operations in a WYSIWYG fashion. Graphs may be exported to postscript/EPS format and can be saved in XML files to be used for later sessions. One of JaxoDraw's main features is the possibility to create ? code that may be used to generate graphics output, thus combining the powers of ? with those of a modern day drawing program. With JaxoDraw it becomes possible to draw even complicated Feynman diagrams with just a few mouse clicks, without the knowledge of any programming language. Program summaryTitle of program: JaxoDraw Catalogue identifier: ADUA Program summary URL:http://cpc.cs.qub.ac.uk/summaries/ADUA Program obtainable from: CPC Program Library, Queen's University of Belfast, N. Ireland Distribution format: tar gzip file Operating system: Any Java-enabled platform, tested on Linux, Windows ME, XP, Mac OS X Programming language used: Java License: GPL Nature of problem: Existing methods for drawing Feynman diagrams usually require some 'hard-coding' in one or the other programming or scripting language. It is not very convenient and often time consuming, to generate relatively simple diagrams. Method of solution: A program is provided that allows for the interactive drawing of Feynman diagrams with a graphical user interface. The program is easy to learn and use, produces high quality output in several formats and runs on any operating system where a Java Runtime Environment is available. Number of bytes in distributed program, including test data: 2 117 863 Number of lines in distributed program, including test data: 60 000 Restrictions: Certain operations (like internal latex compilation, Postscript preview) require the execution of external commands that might not work on untested operating systems. Typical running time: As an interactive program, the running time depends on the complexity of the diagram to be drawn.

Effective correlator for RadioAstron project

NASA Astrophysics Data System (ADS)

Sergeev, Sergey

This paper presents the implementation of programme FX-correlator for Very Long Baseline Interferometry, adapted for the project "RadioAstron". Software correlator implemented for heterogeneous computing systems using graphics accelerators. It is shown that for the task interferometry implementation of the graphics hardware has a high efficiency. The host processor of heterogeneous computing system, performs the function of forming the data flow for graphics accelerators, the number of which corresponds to the number of frequency channels. So, for the Radioastron project, such channels is seven. Each accelerator is perform correlation matrix for all bases for a single frequency channel. Initial data is converted to the floating-point format, is correction for the corresponding delay function and computes the entire correlation matrix simultaneously. Calculation of the correlation matrix is performed using the sliding Fourier transform. Thus, thanks to the compliance of a solved problem for architecture graphics accelerators, managed to get a performance for one processor platform Kepler, which corresponds to the performance of this task, the computing cluster platforms Intel on four nodes. This task successfully scaled not only on a large number of graphics accelerators, but also on a large number of nodes with multiple accelerators.

Effects of animation on naming and identification across two graphic symbol sets representing verbs and prepositions.

PubMed

Schlosser, Ralf W; Koul, Rajinder; Shane, Howard; Sorce, James; Brock, Kristofer; Harmon, Ashley; Moerlein, Dorothy; Hearn, Emilia

2014-10-01

The effects of animation on naming and identification of graphic symbols for verbs and prepositions were studied in 2 graphic symbol sets in preschoolers. Using a 2 × 2 × 2 × 3 completely randomized block design, preschoolers across three age groups were randomly assigned to combinations of symbol set (Autism Language Program [ALP] Animated Graphics or Picture Communication Symbols [PCS]), symbol format (animated or static), and word class (verbs or prepositions). Children were asked to name symbols and to identify a target symbol from an array given the spoken label. Animated symbols were more readily named than static symbols, although this was more pronounced for verbs than for prepositions. ALP symbols were named more accurately than PCS in particular with prepositions. Animation did not facilitate identification. ALP symbols for prepositions were identified better than PCS, but there was no difference for verbs. Finally, older children guessed and identified symbols more effectively than younger children. Animation improves the naming of graphic symbols for verbs. For prepositions, ALP symbols are named more accurately and are more readily identifiable than PCS. Naming and identifying symbols are learned skills that develop over time. Limitations and future research directions are discussed.

Multibody dynamics model building using graphical interfaces

NASA Technical Reports Server (NTRS)

Macala, Glenn A.

1989-01-01

In recent years, the extremely laborious task of manually deriving equations of motion for the simulation of multibody spacecraft dynamics has largely been eliminated. Instead, the dynamicist now works with commonly available general purpose dynamics simulation programs which generate the equations of motion either explicitly or implicitly via computer codes. The user interface to these programs has predominantly been via input data files, each with its own required format and peculiarities, causing errors and frustrations during program setup. Recent progress in a more natural method of data input for dynamics programs: the graphical interface, is described.

New space sensor and mesoscale data analysis

NASA Technical Reports Server (NTRS)

Hickey, John S.

1987-01-01

The developed Earth Science and Application Division (ESAD) system/software provides the research scientist with the following capabilities: an extensive data base management capibility to convert various experiment data types into a standard format; and interactive analysis and display package (AVE80); an interactive imaging/color graphics capability utilizing the Apple III and IBM PC workstations integrated into the ESAD computer system; and local and remote smart-terminal capability which provides color video, graphics, and Laserjet output. Recommendations for updating and enhancing the performance of the ESAD computer system are listed.

Arctic warming will promote Atlantic-Pacific fish interchange

NASA Astrophysics Data System (ADS)

Wisz, M. S.; Broennimann, O.; Grønkjær, P.; Møller, P. R.; Olsen, S. M.; Swingedouw, D.; Hedeholm, R. B.; Nielsen, E. E.; Guisan, A.; Pellissier, L.

2015-03-01

Throughout much of the Quaternary Period, inhospitable environmental conditions above the Arctic Circle have been a formidable barrier separating most marine organisms in the North Atlantic from those in the North Pacific. Rapid warming has begun to lift this barrier, potentially facilitating the interchange of marine biota between the two seas. Here, we forecast the potential northward progression of 515 fish species following climate change, and report the rate of potential species interchange between the Atlantic and the Pacific via the Northwest Passage and the Northeast Passage. For this, we projected niche-based models under climate change scenarios and simulated the spread of species through the passages when climatic conditions became suitable. Results reveal a complex range of responses during this century, and accelerated interchange after 2050. By 2100 up to 41 species could enter the Pacific and 44 species could enter the Atlantic, via one or both passages. Consistent with historical and recent biodiversity interchanges, this exchange of fish species may trigger changes for biodiversity and food webs in the North Atlantic and North Pacific, with ecological and economic consequences to ecosystems that at present contribute 39% to global marine fish landings.

Highway Safety Manual applied in Missouri - freeway/software : research summary.

DOT National Transportation Integrated Search

2016-03-01

AASHTOs Highway Safety Manual (HSM) : includes models for freeway segments, speedchange : lanes (transitional area between mainline : and ramps), ramps, and interchange terminals. : These predictive models for freeway : interchanges need to be cal...

133. AERIAL VIEW OF CLARA BARTON PARKWAY AND I495 INTERCHANGE ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

133. AERIAL VIEW OF CLARA BARTON PARKWAY AND I-495 INTERCHANGE LOOKING EAST. - George Washington Memorial Parkway, Along Potomac River from McLean to Mount Vernon, VA, Mount Vernon, Fairfax County, VA

Roundabouts : an Arizona case study and design guidelines

DOT National Transportation Integrated Search

2003-07-01

The roundabouts controlling traffic at the I-17/Happy Valley Road interchange represent Arizona's first application of modern roundabout traffic control in this manner. The construction of roundabouts at this interchange location served to alleviate ...

Crash location correction for freeway interchange modeling : research summary.

DOT National Transportation Integrated Search

2016-06-01

The project found that 69% of : all reviewed crashes were : landed incorrectly within the : interchange. The error rates by : facility type were 90% for : ramps, 79% for terminals, and : 53% for speed-change lanes.

36 CFR 1237.16 - How do agencies store audiovisual records?

Code of Federal Regulations, 2014 CFR

2014-07-01

....g., store poster series separately from other kinds of agency publications, or photographic series... § 1237.3); (e) Store posters and similar graphic works in oversize formats, in map cases, hanging files...

36 CFR 1237.16 - How do agencies store audiovisual records?

Code of Federal Regulations, 2012 CFR

2012-07-01

....g., store poster series separately from other kinds of agency publications, or photographic series... § 1237.3); (e) Store posters and similar graphic works in oversize formats, in map cases, hanging files...

U.S. Geological Survey National Computer Technology Meeting: Program and Abstracts, Norfolk, Virginia, May 17-22, 1992

DTIC Science & Technology

1992-05-01

formats, and character formats that can easily integrate graphics and text into one document. FrameMaker is one of few ERP software programs that has...easier and faster using ERP software. The DIS-II ERP software program is FrameMaker by Frame Technology, Incorporated. FrameMaker uses the X window...functions, calculus, relations, and other complicated math applications. FrameMaker permits the user to define formats for master pages, reference pages

Statistical Characteristics of Wrong-Way Driving Crashes on Illinois Freeways.

PubMed

Zhou, Huaguo; Zhao, Jiguang; Pour-Rouholamin, Mahdi; Tobias, Priscilla A

2015-01-01

Driving the wrong way on freeways, namely wrong-way driving (WWD), has been found to be a major concern for more than 6 decades. The purpose of this study was to identify characteristics of this type of crash as well as to rank the locations/interchanges according to their vulnerability to WWD entries. The WWD crash data on Illinois freeways were statistically analyzed for a 6-year time period (2004 to 2009) from 3 aspects: crash, vehicle, and person. The temporal distributions, geographical distributions, roadway characteristics, and crash locations were analyzed for WWD crashes. The driver demographic information, physical condition, and injury severity were analyzed for wrong-way drivers. The vehicle characteristics, vehicle operation, and collision results were analyzed for WWD vehicles. A method was brought about to identify wrong-way entry points that was then used to develop a relative-importance technique and rank different interchange types in terms of potential WWD incidents. The findings revealed that a large proportion of WWD crashes occurred during the weekend from midnight to 5 a.m. Approximately 80% of WWD crashes were located in urban areas and nearly 70% of wrong-way vehicles were passenger cars. Approximately 58% of wrong-way drivers were driving under the influence (DUI). Of those, nearly 50% were confirmed to be impaired by alcohol, about 4% were impaired by drugs, and more than 3% had been drinking. The analysis of interchange ranking found that compressed diamond interchanges, single point diamond interchanges (SPDIs), partial cloverleaf interchanges, and freeway feeders had the highest wrong-way crash rates (wrong-way crashes per 100 interchanges per year). The findings of this study call for more attention to WWD crashes from different aspects such as driver age group, time of day, day of week, and DUI drivers. Based on the analysis results of WWD distance, the study explained why a 5-mile radius of WWD crash location should be studied for WWD fatal crashes with unknown entry points.

Acetic Acid Can Catalyze Succinimide Formation from Aspartic Acid Residues by a Concerted Bond Reorganization Mechanism: A Computational Study

PubMed Central

Takahashi, Ohgi; Kirikoshi, Ryota; Manabe, Noriyoshi

2015-01-01

Succinimide formation from aspartic acid (Asp) residues is a concern in the formulation of protein drugs. Based on density functional theory calculations using Ace-Asp-Nme (Ace = acetyl, Nme = NHMe) as a model compound, we propose the possibility that acetic acid (AA), which is often used in protein drug formulation for mildly acidic buffer solutions, catalyzes the succinimide formation from Asp residues by acting as a proton-transfer mediator. The proposed mechanism comprises two steps: cyclization (intramolecular addition) to form a gem-diol tetrahedral intermediate and dehydration of the intermediate. Both steps are catalyzed by an AA molecule, and the first step was predicted to be rate-determining. The cyclization results from a bond formation between the amide nitrogen on the C-terminal side and the side-chain carboxyl carbon, which is part of an extensive bond reorganization (formation and breaking of single bonds and the interchange of single and double bonds) occurring concertedly in a cyclic structure formed by the amide NH bond, the AA molecule and the side-chain C=O group and involving a double proton transfer. The second step also involves an AA-mediated bond reorganization. Carboxylic acids other than AA are also expected to catalyze the succinimide formation by a similar mechanism. PMID:25588215

Acetic acid can catalyze succinimide formation from aspartic acid residues by a concerted bond reorganization mechanism: a computational study.

PubMed

Takahashi, Ohgi; Kirikoshi, Ryota; Manabe, Noriyoshi

2015-01-12

Succinimide formation from aspartic acid (Asp) residues is a concern in the formulation of protein drugs. Based on density functional theory calculations using Ace-Asp-Nme (Ace = acetyl, Nme = NHMe) as a model compound, we propose the possibility that acetic acid (AA), which is often used in protein drug formulation for mildly acidic buffer solutions, catalyzes the succinimide formation from Asp residues by acting as a proton-transfer mediator. The proposed mechanism comprises two steps: cyclization (intramolecular addition) to form a gem-diol tetrahedral intermediate and dehydration of the intermediate. Both steps are catalyzed by an AA molecule, and the first step was predicted to be rate-determining. The cyclization results from a bond formation between the amide nitrogen on the C-terminal side and the side-chain carboxyl carbon, which is part of an extensive bond reorganization (formation and breaking of single bonds and the interchange of single and double bonds) occurring concertedly in a cyclic structure formed by the amide NH bond, the AA molecule and the side-chain C=O group and involving a double proton transfer. The second step also involves an AA-mediated bond reorganization. Carboxylic acids other than AA are also expected to catalyze the succinimide formation by a similar mechanism.

An Interdisciplinary Conservation Module for Condition Survey on Cultural Heritages with a 3d Information System

NASA Astrophysics Data System (ADS)

Pedelì, C.

2013-07-01

In order to make the most of the digital outsourced documents, based on new technologies (e.g.: 3D LASER scanners, photogrammetry, etc.), a new approach was followed and a new ad hoc information system was implemented. The obtained product allow to the final user to reuse and manage the digital documents providing graphic tools and an integrated specific database to manage the entire documentation and conservation process, starting from the condition assessment until the conservation / restoration work. The system is organised on two main modules: Archaeology and Conservation. This paper focus on the features and the advantages of the second one. In particular it is emphasized its logical organisation, the possibility to easily mapping by using a very precise 3D metric platform, to benefit of the integrated relational database which allows to well organise, compare, keep and manage different kind of information at different level. Conservation module can manage along the time the conservation process of a site, monuments, object or excavation and conservation work in progress. An alternative approach called OVO by the author of this paper, force the surveyor to observe and describe the entity decomposing it on functional components, materials and construction techniques. Some integrated tools as the "ICOMOS-ISCS Illustrated glossary … " help the user to describe pathologies with a unified approach and terminology. Also the conservation project phase is strongly supported to envision future intervention and cost. A final section is devoted to record the conservation/restoration work already done or in progress. All information areas of the conservation module are interconnected to each other to allows to the system a complete interchange of graphic and alphanumeric data. The conservation module it self is connected to the archaeological one to create an interdisciplinary daily tool.

Computerised patient record with distributed objects.

PubMed

Gornik, T; Orel, A; Roblek, D; Verhovsek, R

1999-01-01

The vast spectrum of information and functionality requirements imposed on a Computerised Patient Record (CPR), fueled by an ever changing and expanding business model demands information system interoperability. The management of information, created across the continuum of care, and associated information system functionality, can not be provided by data interchange to and from monolithic applications. WebDoctor is a Computerised Patient Record (CPR) which is fully used at the Institute of Oncology in Ljubljana, Slovenia--a hospital with 500 beds and more than 200 users, all of them medical professionals. The data are stored in an underlying Oracle hospital data base. For logging the username and password security is used. WebDoctor uses Internationalization APIs. Currently GUI is currently written in Slovenian language, but can be easily adapted to any other language. It is available in either Metal or Windows look. Search for patients is based on CPR No. or partial data from demographics. All the available patients data can be found on a single screen divided into several tab sections. The tab sections cover general and speciality data. The general data include demographics, admissions and diagnoses, meanwhile the speciality data are divided into Labs where data are represented numerically by date or by type and graphically with the ability of detailed view in separate window, Radiology where results are represented in textual form as well as pictures together with a special viewer to provide detailed analyses and Radioisotopes where results are also being represented in textual form together with a graphical representation. WebDoctor is running on virtually any platform. It achieved the 100% Java Certification which places the application among the firsts if not the first of this kind in the healthcare industry. It excels with a small and light client which doesn't exceed the 150K.

Diverging diamond interchange : informational guide.

DOT National Transportation Integrated Search

2014-08-01

This document provides information and guidance on the Diverging Diamond Interchange (DDI). To the extent possible, the guide : addresses a variety of conditions found in the United States, to achieve designs suitable for a wide array of potential us...

Interchange Safety Analysis Tool (ISAT) : user manual

DOT National Transportation Integrated Search

2007-06-01

This User Manual describes the usage and operation of the spreadsheet-based Interchange Safety Analysis Tool (ISAT). ISAT provides design and safety engineers with an automated tool for assessing the safety effects of geometric design and traffic con...

Alternate-1 and Alternate-2 Orientations in Interchange (Reciprocal Translocation) Quadrivalents

PubMed Central

Rickards, Geoffrey K.

1983-01-01

The dynamic properties of the spindle, and published numerical data, argue that the differentiation of alternate-1 and alternate-2 orientations of an interchange quadrivalent is real and meaningful, contra Boussy (1982). PMID:17246129

A comprehensive safety assessment methodology for innovative geometric designs.

DOT National Transportation Integrated Search

2017-05-01

As the population grows and travel demands increase, alternative interchange designs have become increasingly popular. The diverging diamond interchange is an alternative design that has been implemented in the United States. This design can accommod...

Stress absorbing membrane innerlayer : final report.

DOT National Transportation Integrated Search

1985-04-01

The westbound lanes of the South Baker Interchange-Encina Interchange Section of I-84 were overlayed in 1977. A stress absorbing membrane innerlayer (SAMI), was included in this overlay as an experimental feature. This report is the final evaluation ...

A Cross-Classified CFA-MTMM Model for Structurally Different and Nonindependent Interchangeable Methods.

PubMed

Koch, Tobias; Schultze, Martin; Jeon, Minjeong; Nussbeck, Fridtjof W; Praetorius, Anna-Katharina; Eid, Michael

2016-01-01

Multirater (multimethod, multisource) studies are increasingly applied in psychology. Eid and colleagues (2008) proposed a multilevel confirmatory factor model for multitrait-multimethod (MTMM) data combining structurally different and multiple independent interchangeable methods (raters). In many studies, however, different interchangeable raters (e.g., peers, subordinates) are asked to rate different targets (students, supervisors), leading to violations of the independence assumption and to cross-classified data structures. In the present work, we extend the ML-CFA-MTMM model by Eid and colleagues (2008) to cross-classified multirater designs. The new C4 model (Cross-Classified CTC[M-1] Combination of Methods) accounts for nonindependent interchangeable raters and enables researchers to explicitly model the interaction between targets and raters as a latent variable. Using a real data application, it is shown how credibility intervals of model parameters and different variance components can be obtained using Bayesian estimation techniques.

12 CFR Appendix H to Part 1022 - Appendix H-Model Forms for Risk-Based Pricing and Credit Score Disclosure Exception Notices

Code of Federal Regulations, 2013 CFR

2013-01-01

... addresses that may change over time. ii. The addition of graphics or icons, such as the person's corporate... change the forms by rearranging the format or by making technical modifications to the language of the... required to conduct consumer testing when rearranging the format of the model forms. a. Acceptable changes...

Reprocessing of multi-channel seismic-reflection data collected in the Beaufort Sea

USGS Publications Warehouse

Agena, W.F.; Lee, Myung W.; Hart, P.E.

2000-01-01

Contained on this set of two CD-ROMs are stacked and migrated multi-channel seismic-reflection data for 65 lines recorded in the Beaufort Sea by the United States Geological Survey in 1977. All data were reprocessed by the USGS using updated processing methods resulting in improved interpretability. Each of the two CD-ROMs contains the following files: 1) 65 files containing the digital seismic data in standard, SEG-Y format; 2) 1 file containing navigation data for the 65 lines in standard SEG-P1 format; 3) an ASCII text file with cross-reference information for relating the sequential trace numbers on each line to cdp numbers and shotpoint numbers; 4) 2 small scale graphic images (stacked and migrated) of a segment of line 722 in Adobe Acrobat (R) PDF format; 5) a graphic image of the location map, generated from the navigation file; 6) PlotSeis, an MS-DOS Application that allows PC users to interactively view the SEG-Y files; 7) a PlotSeis documentation file; and 8) an explanation of the processing used to create the final seismic sections (this document).

Cellulose synthase 'class specific regions' are intrinsically disordered and functionally undifferentiated.

PubMed

Scavuzzo-Duggan, Tess R; Chaves, Arielle M; Singh, Abhishek; Sethaphong, Latsavongsakda; Slabaugh, Erin; Yingling, Yaroslava G; Haigler, Candace H; Roberts, Alison W

2018-06-01

Cellulose synthases (CESAs) are glycosyltransferases that catalyze formation of cellulose microfibrils in plant cell walls. Seed plant CESA isoforms cluster in six phylogenetic clades, whose non-interchangeable members play distinct roles within cellulose synthesis complexes (CSCs). A 'class specific region' (CSR), with higher sequence similarity within versus between functional CESA classes, has been suggested to contribute to specific activities or interactions of different isoforms. We investigated CESA isoform specificity in the moss, Physcomitrella patens (Hedw.) B. S. G. to gain evolutionary insights into CESA structure/function relationships. Like seed plants, P. patens has oligomeric rosette-type CSCs, but the PpCESAs diverged independently and form a separate CESA clade. We showed that P. patens has two functionally distinct CESAs classes, based on the ability to complement the gametophore-negative phenotype of a ppcesa5 knockout line. Thus, non-interchangeable CESA classes evolved separately in mosses and seed plants. However, testing of chimeric moss CESA genes for complementation demonstrated that functional class-specificity is not determined by the CSR. Sequence analysis and computational modeling showed that the CSR is intrinsically disordered and contains predicted molecular recognition features, consistent with a possible role in CESA oligomerization and explaining the evolution of class-specific sequences without selection for class-specific function. © 2018 Institute of Botany, Chinese Academy of Sciences.

36 CFR § 1237.16 - How do agencies store audiovisual records?

Code of Federal Regulations, 2013 CFR

2013-07-01

... textual series (e.g., store poster series separately from other kinds of agency publications, or... reference, see § 1237.3); (e) Store posters and similar graphic works in oversize formats, in map cases...

An Interactive Educational Tool for Compressible Aerodynamics

NASA Technical Reports Server (NTRS)

Benson, Thomas J.

1994-01-01

A workstation-based interactive educational tool was developed to aid in the teaching of undergraduate compressible aerodynamics. The tool solves for the supersonic flow past a wedge using the equations found in NACA 1135. The student varies the geometry or flow conditions through a graphical user interface and the new conditions are calculated immediately. Various graphical formats present the variation of flow results to the student. One such format leads the student to the generation of some of the graphs found in NACA-1135. The tool includes interactive questions and answers to aid in both the use of the tool and to develop an understanding of some of the complexities of compressible aerodynamics. A series of help screens make the simulator easy to learn and use. This paper will detail the numerical methods used in the tool and describe how it can be used and modified.

MOCAD: A Tool for Graphical and Interactive Calculation and Optimization of Cam Mechanisms and Motion Control Systems

NASA Astrophysics Data System (ADS)

Heine, A.; Berger, M.

The classical meaning of motion design is the usage of laws of motion with convenient characteristic values. Whereas the software MOCAD supports a graphical and interactive mode of operation, among others by using an automatic polynomial interpolation. Besides a direct coupling for motion control systems, different file formats for data export are offered. The calculation of plane and spatial cam mechanisms is also based on the data, generated in the motion design module. Drawing on an example of an intermittent cam mechanism with an inside cam profile used as a new drive concept for indexing tables, the influence of motion design on the transmission properties is shown. Another example gives an insight into the calculation and export of envelope curves for cylindrical cam mechanisms. The gained geometry data can be used for generating realistic 3D-models in the CAD-system Pro/ENGINEER, using a special data exchange format.

JAMI: a Java library for molecular interactions and data interoperability.

PubMed

Sivade Dumousseau, M; Koch, M; Shrivastava, A; Alonso-López, D; De Las Rivas, J; Del-Toro, N; Combe, C W; Meldal, B H M; Heimbach, J; Rappsilber, J; Sullivan, J; Yehudi, Y; Orchard, S

2018-04-11

A number of different molecular interactions data download formats now exist, designed to allow access to these valuable data by diverse user groups. These formats include the PSI-XML and MITAB standard interchange formats developed by Molecular Interaction workgroup of the HUPO-PSI in addition to other, use-specific downloads produced by other resources. The onus is currently on the user to ensure that a piece of software is capable of read/writing all necessary versions of each format. This problem may increase, as data providers strive to meet ever more sophisticated user demands and data types. A collaboration between EMBL-EBI and the University of Cambridge has produced JAMI, a single library to unify standard molecular interaction data formats such as PSI-MI XML and PSI-MITAB. The JAMI free, open-source library enables the development of molecular interaction computational tools and pipelines without the need to produce different versions of software to read different versions of the data formats. Software and tools developed on top of the JAMI framework are able to integrate and support both PSI-MI XML and PSI-MITAB. The use of JAMI avoids the requirement to chain conversions between formats in order to reach a desired output format and prevents code and unit test duplication as the code becomes more modular. JAMI's model interfaces are abstracted from the underlying format, hiding the complexity and requirements of each data format from developers using JAMI as a library.

Realistic natural atmospheric phenomena and weather effects for interactive virtual environments

NASA Astrophysics Data System (ADS)

McLoughlin, Leigh

Clouds and the weather are important aspects of any natural outdoor scene, but existing dynamic techniques within computer graphics only offer the simplest of cloud representations. The problem that this work looks to address is how to provide a means of simulating clouds and weather features such as precipitation, that are suitable for virtual environments. Techniques for cloud simulation are available within the area of meteorology, but numerical weather prediction systems are computationally expensive, give more numerical accuracy than we require for graphics and are restricted to the laws of physics. Within computer graphics, we often need to direct and adjust physical features or to bend reality to meet artistic goals, which is a key difference between the subjects of computer graphics and physical science. Pure physically-based simulations, however, evolve their solutions according to pre-set rules and are notoriously difficult to control. The challenge then is for the solution to be computationally lightweight and able to be directed in some measure while at the same time producing believable results. This work presents a lightweight physically-based cloud simulation scheme that simulates the dynamic properties of cloud formation and weather effects. The system simulates water vapour, cloud water, cloud ice, rain, snow and hail. The water model incorporates control parameters and the cloud model uses an arbitrary vertical temperature profile, with a tool described to allow the user to define this. The result of this work is that clouds can now be simulated in near real-time complete with precipitation. The temperature profile and tool then provide a means of directing the resulting formation..

WORM - WINDOWED OBSERVATION OF RELATIVE MOTION

NASA Technical Reports Server (NTRS)

Bauer, F.

1994-01-01

The Windowed Observation of Relative Motion, WORM, program is primarily intended for the generation of simple X-Y plots from data created by other programs. It allows the user to label, zoom, and change the scale of various plots. Three dimensional contour and line plots are provided, although with more limited capabilities. The input data can be in binary or ASCII format, although all data must be in the same format. A great deal of control over the details of the plot is provided, such as gridding, size of tick marks, colors, log/semilog capability, time tagging, and multiple and phase plane plots. Many color and monochrome graphics terminals and hard copy printer/plotters are supported. The WORM executive commands, menu selections and macro files can be used to develop plots and tabular data, query the WORM Help library, retrieve data from input files, and invoke VAX DCL commands. WORM generated plots are displayed on local graphics terminals and can be copied using standard hard copy capabilities. Some of the graphics features of WORM include: zooming and dezooming various portions of the plot; plot documentation including curve labeling and function listing; multiple curves on the same plot; windowing of multiple plots and insets of the same plot; displaying a specific on a curve; and spinning the curve left, right, up, and down. WORM is written in PASCAL for interactive execution and has been implemented on a DEC VAX computer operating under VMS 4.7 with a virtual memory requirement of approximately 392K of 8 bit bytes. It uses the QPLOT device independent graphics library included with WORM. It was developed in 1988.

Text-mining-assisted biocuration workflows in Argo

PubMed Central

Rak, Rafal; Batista-Navarro, Riza Theresa; Rowley, Andrew; Carter, Jacob; Ananiadou, Sophia

2014-01-01

Biocuration activities have been broadly categorized into the selection of relevant documents, the annotation of biological concepts of interest and identification of interactions between the concepts. Text mining has been shown to have a potential to significantly reduce the effort of biocurators in all the three activities, and various semi-automatic methodologies have been integrated into curation pipelines to support them. We investigate the suitability of Argo, a workbench for building text-mining solutions with the use of a rich graphical user interface, for the process of biocuration. Central to Argo are customizable workflows that users compose by arranging available elementary analytics to form task-specific processing units. A built-in manual annotation editor is the single most used biocuration tool of the workbench, as it allows users to create annotations directly in text, as well as modify or delete annotations created by automatic processing components. Apart from syntactic and semantic analytics, the ever-growing library of components includes several data readers and consumers that support well-established as well as emerging data interchange formats such as XMI, RDF and BioC, which facilitate the interoperability of Argo with other platforms or resources. To validate the suitability of Argo for curation activities, we participated in the BioCreative IV challenge whose purpose was to evaluate Web-based systems addressing user-defined biocuration tasks. Argo proved to have the edge over other systems in terms of flexibility of defining biocuration tasks. As expected, the versatility of the workbench inevitably lengthened the time the curators spent on learning the system before taking on the task, which may have affected the usability of Argo. The participation in the challenge gave us an opportunity to gather valuable feedback and identify areas of improvement, some of which have already been introduced. Database URL: http://argo.nactem.ac.uk PMID:25037308

Safety performance functions for ramp terminals at diamond interchanges.

DOT National Transportation Integrated Search

2011-07-01

This report documents two efforts to support CDOT in the area of Safety Performance Function (SPF) : development. The first involved the data collection and development of SPFs for five categories of ramp : terminals at diamond interchanges. For each...

Freeway operations analysis of I-80 to I-29 interchange.

DOT National Transportation Integrated Search

1974-01-01

At the request of the Iowa State Highway Commission, the Engineering Research Institute observed the traffic operations at the Interstate 29 (1-29) and Interstate 80 (1-80) interchange in the southwest part of Council Bluffs.

Concurrent flow lanes - phase III.

DOT National Transportation Integrated Search

2011-01-01

This report describes efforts taken to develop and calibrate VISSIM models of existing : concurrent flow lane designs of north- and southbound lanes of I-270 from the interchange at : I-70 to interchanges on I-495 at Connecticut Avenue in Maryland an...

Safety evaluation of diverging diamond interchanges in Missouri.

DOT National Transportation Integrated Search

2015-01-01

The Diverging Diamond Interchange (DDI) has gained in popularity in the United States during the last decade. The : operational benefits and lower costs of retrofitting a conventional diamond with a DDI have contributed to its increased use. : Existi...

49 CFR Appendix A to Part 564 - Information to be Submitted for Replaceable Light Sources

Code of Federal Regulations, 2013 CFR

2013-10-01

..., and any other interchangeability dimensions for indexing the bulb base in the bulb holder. B. Diameter..., diameters, key/keyway sizes, and any other interchangeability dimensions for indexing the bulb base in the...

49 CFR Appendix A to Part 564 - Information to be Submitted for Replaceable Light Sources

Code of Federal Regulations, 2014 CFR

2014-10-01

..., and any other interchangeability dimensions for indexing the bulb base in the bulb holder. B. Diameter..., diameters, key/keyway sizes, and any other interchangeability dimensions for indexing the bulb base in the...

49 CFR Appendix A to Part 564 - Information To Be Submitted for Replaceable Light Sources

Code of Federal Regulations, 2011 CFR

2011-10-01

..., and any other interchangeability dimensions for indexing the bulb base in the bulb holder. B. Diameter..., diameters, key/keyway sizes, and any other interchangeability dimensions for indexing the bulb base in the...

49 CFR Appendix A to Part 564 - Information To Be Submitted for Replaceable Light Sources

Code of Federal Regulations, 2010 CFR

2010-10-01

..., and any other interchangeability dimensions for indexing the bulb base in the bulb holder. B. Diameter..., diameters, key/keyway sizes, and any other interchangeability dimensions for indexing the bulb base in the...

49 CFR Appendix A to Part 564 - Information To Be Submitted for Replaceable Light Sources

Code of Federal Regulations, 2012 CFR

2012-10-01

..., and any other interchangeability dimensions for indexing the bulb base in the bulb holder. B. Diameter..., diameters, key/keyway sizes, and any other interchangeability dimensions for indexing the bulb base in the...

UDOT diverging diamond interchange (DDI) observations and experience.

DOT National Transportation Integrated Search

2012-04-01

This report presents the results of a functionality evaluation, by the I-15 Utah County Corridor Expansion (CORE) traffic team, of the first Diverging Diamond Interchange (DDI) in Utah, located at the intersection of American Fork Main Street (Pionee...

OAP- OFFICE AUTOMATION PILOT GRAPHICS DATABASE SYSTEM

NASA Technical Reports Server (NTRS)

Ackerson, T.

1994-01-01

The Office Automation Pilot (OAP) Graphics Database system offers the IBM PC user assistance in producing a wide variety of graphs and charts. OAP uses a convenient database system, called a chartbase, for creating and maintaining data associated with the charts, and twelve different graphics packages are available to the OAP user. Each of the graphics capabilities is accessed in a similar manner. The user chooses creation, revision, or chartbase/slide show maintenance options from an initial menu. The user may then enter or modify data displayed on a graphic chart. The cursor moves through the chart in a "circular" fashion to facilitate data entries and changes. Various "help" functions and on-screen instructions are available to aid the user. The user data is used to generate the graphics portion of the chart. Completed charts may be displayed in monotone or color, printed, plotted, or stored in the chartbase on the IBM PC. Once completed, the charts may be put in a vector format and plotted for color viewgraphs. The twelve graphics capabilities are divided into three groups: Forms, Structured Charts, and Block Diagrams. There are eight Forms available: 1) Bar/Line Charts, 2) Pie Charts, 3) Milestone Charts, 4) Resources Charts, 5) Earned Value Analysis Charts, 6) Progress/Effort Charts, 7) Travel/Training Charts, and 8) Trend Analysis Charts. There are three Structured Charts available: 1) Bullet Charts, 2) Organization Charts, and 3) Work Breakdown Structure (WBS) Charts. The Block Diagram available is an N x N Chart. Each graphics capability supports a chartbase. The OAP graphics database system provides the IBM PC user with an effective means of managing data which is best interpreted as a graphic display. The OAP graphics database system is written in IBM PASCAL 2.0 and assembler for interactive execution on an IBM PC or XT with at least 384K of memory, and a color graphics adapter and monitor. Printed charts require an Epson, IBM, OKIDATA, or HP Laser printer (or equivalent). Plots require the Tektronix 4662 Penplotter. Source code is supplied to the user for modification and customizing. Executables are also supplied for all twelve graphics capabilities. This system was developed in 1983, and Version 3.1 was released in 1986.

Ethnoecology of the interchange of wild and weedy plants and mushrooms in Phurépecha markets of Mexico: economic motives of biotic resources management.

PubMed

Farfán-Heredia, Berenice; Casas, Alejandro; Moreno-Calles, Ana I; García-Frapolli, Eduardo; Castilleja, Aída

2018-01-15

Interactions between societies and nature are regulated by complex systems of beliefs, symbolism, customs, and worldviews (kosmos), ecological knowledge (corpus), and management strategies and practices (praxis), which are constructed as product of experiences and communication of people throughout time. These aspects influence social relations, life strategies, and cultural identity, and all of them in turn influence and are influenced by local and regional patterns of interchange. In this study, we analyze the interchange of wild and weedy plants and mushrooms in traditional markets of the Phurépecha region of Mexico. Particularly, the social relations constructed around the interchange of these products; how knowledge, cultural values, and ecological factors influence and are influenced by interchange; and how all these factors influence the type and intensity of biotic resources management. We studied three main traditional markets of the Phurépecha region of Michoacán, Mexico, through 140 visits to markets and 60 semi-structured interviews to sellers of wild and weedy plants and mushrooms. In nearly 2 years, we carried out 80 visits and 30 interviews in the "Barter Market", 20 visits and 15 interviews in the "Phurépecha Tiánguis", and 40 visits and 15 interviews to the "Municipal Market". We documented information about the spaces of interchange that form the markets, the types of interchange occurring there, the cultural and economic values of the resources studied, the environmental units that are sources of such resources, the activities associated to resources harvesting and, particularly, the management techniques practiced to ensure or increase their availability. We analyzed the relations between the amounts of products interchanged, considered as pressures on the resources; the perception of their abundance or scarcity, considered as the magnitude of risk in relation to the pressures referred to; and the management types as response to pressures and risk. We recorded 38 species of wild and weedy plants and 15 mushroom species interchanged in the markets. We characterized the spaces of interchange, the interchange types, and social relations among numerous Phurépecha communities which maintain the main features of pre-Columbian markets. The products analyzed are differentially valued according to their role in people's life, particularly food, medicine, rituals, and ornamental purposes. The highest cultural values were identified in multi-purpose plant and mushroom resources and, outstandingly, in ornamental and ritual plants. In markets, women are the main actors and connectors of the regional households' activities of use and management of local resources and ecosystems. The interrelationships between worldviews, knowledge, and practices are visible through the interchange of the products analyzed, including the types of environments comprised in communitarian territories, agricultural calendars, and feasts. Those plants and mushrooms are highly valued but relatively scarce according to the demand on them receiving special attention and management practices directed to ensure or increase their availability. With the exception of most mushrooms and ornamental and ritual plants, which have high economic and cultural values, there are those that are relatively scarce and under high risk, but are obtained through simple gathering from the wild. Traditional markets are crucial part of the subsistence strategy of Phurépecha people based on the multiple use of resources and ecosystems at the local and regional levels. The markets influence social relations, cultural identity, and preservation of traditional knowledge and biodiversity. In general, the demand of products in markets enhances innovation and practices for ensuring or increasing their availability, particularly those that are naturally scarce. However, it was notorious that, althoug mushrooms and ritual plants have high demand and value in markets, most of them are obtained by simple gathering.

A statistical data analysis and plotting program for cloud microphysics experiments

NASA Technical Reports Server (NTRS)

Jordan, A. J.

1981-01-01

The analysis software developed for atmospheric cloud microphysics experiments conducted in the laboratory as well as aboard a KC-135 aircraft is described. A group of four programs was developed and implemented on a Hewlett Packard 1000 series F minicomputer running under HP's RTE-IVB operating system. The programs control and read data from a MEMODYNE Model 3765-8BV cassette recorder, format the data on the Hewlett Packard disk subsystem, and generate statistical data (mean, variance, standard deviation) and voltage and engineering unit plots on a user selected plotting device. The programs are written in HP FORTRAN IV and HP ASSEMBLY Language with the graphics software using the HP 1000 Graphics. The supported plotting devices are the HP 2647A graphics terminal, the HP 9872B four color pen plotter, and the HP 2608A matrix line printer.

Semantic Web Data Discovery of Earth Science Data at NASA Goddard Earth Sciences Data and Information Services Center (GES DISC)

NASA Technical Reports Server (NTRS)

Hegde, Mahabaleshwara; Strub, Richard F.; Lynnes, Christopher S.; Fang, Hongliang; Teng, William

2008-01-01

Mirador is a web interface for searching Earth Science data archived at the NASA Goddard Earth Sciences Data and Information Services Center (GES DISC). Mirador provides keyword-based search and guided navigation for providing efficient search and access to Earth Science data. Mirador employs the power of Google's universal search technology for fast metadata keyword searches, augmented by additional capabilities such as event searches (e.g., hurricanes), searches based on location gazetteer, and data services like format converters and data sub-setters. The objective of guided data navigation is to present users with multiple guided navigation in Mirador is an ontology based on the Global Change Master directory (GCMD) Directory Interchange Format (DIF). Current implementation includes the project ontology covering various instruments and model data. Additional capabilities in the pipeline include Earth Science parameter and applications ontologies.

The HUPO proteomics standards initiative--easing communication and minimizing data loss in a changing world.

PubMed

Orchard, Sandra; Hermjakob, Henning

2008-03-01

The amount of data currently being generated by proteomics laboratories around the world is increasing exponentially, making it ever more critical that scientists are able to exchange, compare and retrieve datasets when re-evaluation of their original conclusions becomes important. Only a fraction of this data is published in the literature and important information is being lost every day as data formats become obsolete. The Human Proteome Organisation Proteomics Standards Initiative (HUPO-PSI) was tasked with the creation of data standards and interchange formats to allow both the exchange and storage of such data irrespective of the hardware and software from which it was generated. This article will provide an update on the work of this group, the creation and implementation of these standards and the standards-compliant data repositories being established as result of their efforts.

Model and Algorithm for Substantiating Solutions for Organization of High-Rise Construction Project

NASA Astrophysics Data System (ADS)

Anisimov, Vladimir; Anisimov, Evgeniy; Chernysh, Anatoliy

2018-03-01

In the paper the models and the algorithm for the optimal plan formation for the organization of the material and logistical processes of the high-rise construction project and their financial support are developed. The model is based on the representation of the optimization procedure in the form of a non-linear problem of discrete programming, which consists in minimizing the execution time of a set of interrelated works by a limited number of partially interchangeable performers while limiting the total cost of performing the work. The proposed model and algorithm are the basis for creating specific organization management methodologies for the high-rise construction project.

The FBI wavelet/scalar quantization standard for gray-scale fingerprint image compression

DOE Office of Scientific and Technical Information (OSTI.GOV)

Bradley, J.N.; Brislawn, C.M.; Hopper, T.

1993-05-01

The FBI has recently adopted a standard for the compression of digitized 8-bit gray-scale fingerprint images. The standard is based on scalar quantization of a 64-subband discrete wavelet transform decomposition of the images, followed by Huffman coding. Novel features of the algorithm include the use of symmetric boundary conditions for transforming finite-length signals and a subband decomposition tailored for fingerprint images scanned at 500 dpi. The standard is intended for use in conjunction with ANSI/NBS-CLS 1-1993, American National Standard Data Format for the Interchange of Fingerprint Information, and the FBI`s Integrated Automated Fingerprint Identification System.

The FBI wavelet/scalar quantization standard for gray-scale fingerprint image compression

DOE Office of Scientific and Technical Information (OSTI.GOV)

Bradley, J.N.; Brislawn, C.M.; Hopper, T.

1993-01-01

The FBI has recently adopted a standard for the compression of digitized 8-bit gray-scale fingerprint images. The standard is based on scalar quantization of a 64-subband discrete wavelet transform decomposition of the images, followed by Huffman coding. Novel features of the algorithm include the use of symmetric boundary conditions for transforming finite-length signals and a subband decomposition tailored for fingerprint images scanned at 500 dpi. The standard is intended for use in conjunction with ANSI/NBS-CLS 1-1993, American National Standard Data Format for the Interchange of Fingerprint Information, and the FBI's Integrated Automated Fingerprint Identification System.

A new image representation for compact and secure communication

DOE Office of Scientific and Technical Information (OSTI.GOV)

Prasad, Lakshman; Skourikhine, A. N.

In many areas of nuclear materials management there is a need for communication, archival, and retrieval of annotated image data between heterogeneous platforms and devices to effectively implement safety, security, and safeguards of nuclear materials. Current image formats such as JPEG are not ideally suited in such scenarios as they are not scalable to different viewing formats, and do not provide a high-level representation of images that facilitate automatic object/change detection or annotation. The new Scalable Vector Graphics (SVG) open standard for representing graphical information, recommended by the World Wide Web Consortium (W3C) is designed to address issues of imagemore » scalability, portability, and annotation. However, until now there has been no viable technology to efficiently field images of high visual quality under this standard. Recently, LANL has developed a vectorized image representation that is compatible with the SVG standard and preserves visual quality. This is based on a new geometric framework for characterizing complex features in real-world imagery that incorporates perceptual principles of processing visual information known from cognitive psychology and vision science, to obtain a polygonal image representation of high fidelity. This representation can take advantage of all textual compression and encryption routines unavailable to other image formats. Moreover, this vectorized image representation can be exploited to facilitate automated object recognition that can reduce time required for data review. The objects/features of interest in these vectorized images can be annotated via animated graphics to facilitate quick and easy display and comprehension of processed image content.« less

Comprehensive plan amendment impacts on interchanges in Oregon : final report.

DOT National Transportation Integrated Search

2005-09-01

This report examines the effects of amendments to local comprehensive plans on interchange performance on the Oregon highway system. Plan amendments over a 15-year period in Oregon, resulting in changes to industrial or commercial land use, were revi...

Crash location correction for freeway interchange modeling : final report.

DOT National Transportation Integrated Search

2016-06-01

AASHTO released a supplement to the Highway Safety Manual (HSM) in 2014 that includes models for freeway : interchanges composed of segments, speed-change lanes and terminals. A necessary component to the use of HSM is : having the appropriate safety...

Research notes : linking land use to traffic impacts at interchanges.

DOT National Transportation Integrated Search

2006-08-01

The objective of the research was to examine the effects of comprehensive plan amendments on interchange performance on the Oregon highway system. The focus of the study was on comprehensive plan amendments for new commercial and industrial land uses...

Collecting and Analyzing Stakeholder Feedback for Signing at Complex Interchanges

DOT National Transportation Integrated Search

2014-10-01

The purpose of this project was to identify design constraints related to signing, markings, and geometry for complex interchanges, and then to identify useful topics for future research that will yield findings that can address those design issues. ...

77 FR 14464 - Notice of Final Federal Agency Actions on Proposed Highway Project in Wisconsin

Federal Register 2010, 2011, 2012, 2013, 2014

2012-03-09

... a proposed highway project, Interstate I-94, I-894, and U.S. Highway 45 (Zoo Interchange) in... project: Interstate I-94, I-894, and U.S. Highway 45 (Zoo Interchange) in Milwaukee County, Wisconsin...

Lane assignment traffic control devices on frontage roads and conventional roads at interchanges : technical report.

DOT National Transportation Integrated Search

2011-11-01

The intersection and mandatory movement lane control signs placed on intersection approaches are critical to : safe and efficient intersection operations. Ramp, frontage road, and cross-street approaches to interchanges : often widen at intersections...

Interchange Instability and Transport in Matter-Antimatter Plasmas

NASA Astrophysics Data System (ADS)

Kendl, Alexander; Danler, Gregor; Wiesenberger, Matthias; Held, Markus

2017-06-01

Symmetric electron-positron plasmas in inhomogeneous magnetic fields are intrinsically subject to interchange instability and transport. Scaling relations for the propagation velocity of density perturbations relevant to transport in isothermal magnetically confined electron-positron plasmas are deduced, including damping effects when Debye lengths are large compared to Larmor radii. The relations are verified by nonlinear full-F gyrofluid computations. Results are analyzed with respect to planned magnetically confined electron-positron plasma experiments. The model is generalized to other matter-antimatter plasmas. Magnetized electron-positron-proton-antiproton plasmas are susceptible to interchange-driven local matter-antimatter separation, which can impede sustained laboratory magnetic confinement.

Local regulation of interchange turbulence in a dipole-confined plasma torus using current-collection feedback

DOE Office of Scientific and Technical Information (OSTI.GOV)

Roberts, T. M., E-mail: tmr2122@columbia.edu; Mauel, M. E., E-mail: mauel@columbia.edu; Worstell, M. W.

2015-05-15

Turbulence in plasma confined by a magnetic dipole is dominated by interchange fluctuations with complex dynamics and short spatial coherence. We report the first use of local current-collection feedback to modify, amplify, and suppress these fluctuations. The spatial extent of turbulence regulation is limited to a correlation length near the collector. Changing the gain and phase of collection results in power either extracted from or injected into the turbulence. The measured plasma response shows some agreement with calculations of the linear response of global interchange-like MHD and entropy modes to current-collection feedback.

Interchange Instability and Transport in Matter-Antimatter Plasmas.

PubMed

Kendl, Alexander; Danler, Gregor; Wiesenberger, Matthias; Held, Markus

2017-06-09

Symmetric electron-positron plasmas in inhomogeneous magnetic fields are intrinsically subject to interchange instability and transport. Scaling relations for the propagation velocity of density perturbations relevant to transport in isothermal magnetically confined electron-positron plasmas are deduced, including damping effects when Debye lengths are large compared to Larmor radii. The relations are verified by nonlinear full-F gyrofluid computations. Results are analyzed with respect to planned magnetically confined electron-positron plasma experiments. The model is generalized to other matter-antimatter plasmas. Magnetized electron-positron-proton-antiproton plasmas are susceptible to interchange-driven local matter-antimatter separation, which can impede sustained laboratory magnetic confinement.

A new cryogenic diode thermometer

NASA Astrophysics Data System (ADS)

Courts, S. S.; Swinehart, P. R.; Yeager, C. J.

2002-05-01

While the introduction of yet another cryogenic diode thermometer is not earth shattering, a new diode thermometer, the DT-600 series, recently introduced by Lake Shore Cryotronics, possesses three features that make it unique among commercial diode thermometers. First, these diodes have been probed at the chip level, allowing for the availability of a bare chip thermometer matching a standard curve-an important feature in situations where real estate is at a premium (IR detectors), or where in-situ calibration is difficult. Second, the thermometry industry has assumed that interchangeability should be best at low temperatures. Thus, good interchangeability at room temperatures implies a very good interchangeability at cryogenic temperature, resulting in a premium priced sensor. The DT-600 series diode thermometer is available in an interchangeability band comparable to platinum RTDs with the added advantage of interchangeability to 2 K. Third, and most important, the DT-600 series diode does not exhibit an instability in the I-V characteristic in the 8 K to 20 K temperature range that is observed in other commercial diode thermometer devices [1]. This paper presents performance characteristics for the DT-600 series diode thermometer along with a comparison of I-V curves for this device and other commercial diode thermometers exhibiting an I-V instability.

Dynamics of Coronal Hole Boundaries

NASA Technical Reports Server (NTRS)

Higginson, A. K.; Antiochos, S. K.; DeVore, C. R.; Wyper, Peter F.; Zurbuchen, T. H.

2017-01-01

Remote and in situ observations strongly imply that the slow solar wind consists of plasma from the hot, closed-field corona that is released onto open magnetic field lines. The Separatrix Web theory for the slow wind proposesthat photospheric motions at the scale of supergranules are responsible for generating dynamics at coronal-holeboundaries, which result in the closed plasma release. We use three-dimensional magnetohydrodynamicsimulations to determine the effect of photospheric flows on the open and closed magnetic flux of a model coronawith a dipole magnetic field and an isothermal solar wind. A rotational surface motion is used to approximatephotospheric supergranular driving and is applied at the boundary between the coronal hole and helmet streamer.The resulting dynamics consist primarily of prolific and efficient interchange reconnection between open andclosed flux. The magnetic flux near the coronal-hole boundary experiences multiple interchange events, with someflux interchanging over 50 times in one day. Additionally, we find that the interchange reconnection occurs allalong the coronal-hole boundary and even produces a lasting change in magnetic-field connectivity in regions thatwere not driven by the applied motions. Our results show that these dynamics should be ubiquitous in the Sun andheliosphere. We discuss the implications of our simulations for understanding the observed properties of the slowsolar wind, with particular focus on the global-scale consequences of interchange reconnection.

An O([Formula: see text]) algorithm for sorting signed genomes by reversals, transpositions, transreversals and block-interchanges.

PubMed

Yu, Shuzhi; Hao, Fanchang; Leong, Hon Wai

2016-02-01

We consider the problem of sorting signed permutations by reversals, transpositions, transreversals, and block-interchanges. The problem arises in the study of species evolution via large-scale genome rearrangement operations. Recently, Hao et al. gave a 2-approximation scheme called genome sorting by bridges (GSB) for solving this problem. Their result extended and unified the results of (i) He and Chen - a 2-approximation algorithm allowing reversals, transpositions, and block-interchanges (by also allowing transversals) and (ii) Hartman and Sharan - a 1.5-approximation algorithm allowing reversals, transpositions, and transversals (by also allowing block-interchanges). The GSB result is based on introduction of three bridge structures in the breakpoint graph, the L-bridge, T-bridge, and X-bridge that models goodreversal, transposition/transreversal, and block-interchange, respectively. However, the paper by Hao et al. focused on proving the 2-approximation GSB scheme and only mention a straightforward [Formula: see text] algorithm. In this paper, we give an [Formula: see text] algorithm for implementing the GSB scheme. The key idea behind our faster GSB algorithm is to represent cycles in the breakpoint graph by their canonical sequences, which greatly simplifies the search for these bridge structures. We also give some comparison results (running time and computed distances) against the original GSB implementation.

A web-based data-querying tool based on ontology-driven methodology and flowchart-based model.

PubMed

Ping, Xiao-Ou; Chung, Yufang; Tseng, Yi-Ju; Liang, Ja-Der; Yang, Pei-Ming; Huang, Guan-Tarn; Lai, Feipei

2013-10-08

Because of the increased adoption rate of electronic medical record (EMR) systems, more health care records have been increasingly accumulating in clinical data repositories. Therefore, querying the data stored in these repositories is crucial for retrieving the knowledge from such large volumes of clinical data. The aim of this study is to develop a Web-based approach for enriching the capabilities of the data-querying system along the three following considerations: (1) the interface design used for query formulation, (2) the representation of query results, and (3) the models used for formulating query criteria. The Guideline Interchange Format version 3.5 (GLIF3.5), an ontology-driven clinical guideline representation language, was used for formulating the query tasks based on the GLIF3.5 flowchart in the Protégé environment. The flowchart-based data-querying model (FBDQM) query execution engine was developed and implemented for executing queries and presenting the results through a visual and graphical interface. To examine a broad variety of patient data, the clinical data generator was implemented to automatically generate the clinical data in the repository, and the generated data, thereby, were employed to evaluate the system. The accuracy and time performance of the system for three medical query tasks relevant to liver cancer were evaluated based on the clinical data generator in the experiments with varying numbers of patients. In this study, a prototype system was developed to test the feasibility of applying a methodology for building a query execution engine using FBDQMs by formulating query tasks using the existing GLIF. The FBDQM-based query execution engine was used to successfully retrieve the clinical data based on the query tasks formatted using the GLIF3.5 in the experiments with varying numbers of patients. The accuracy of the three queries (ie, "degree of liver damage," "degree of liver damage when applying a mutually exclusive setting," and "treatments for liver cancer") was 100% for all four experiments (10 patients, 100 patients, 1000 patients, and 10,000 patients). Among the three measured query phases, (1) structured query language operations, (2) criteria verification, and (3) other, the first two had the longest execution time. The ontology-driven FBDQM-based approach enriched the capabilities of the data-querying system. The adoption of the GLIF3.5 increased the potential for interoperability, shareability, and reusability of the query tasks.

GEMPAK 5.1 - A GENERAL METEOROLOGICAL PACKAGE (VAX VMS VERSION)

NASA Technical Reports Server (NTRS)

Des, Jardins M. L.

1994-01-01

GEMPAK is a general meteorological software package developed at NASA/Goddard Space Flight Center. It includes programs to analyze and display surface, upper-air, and gridded data, including model output. There are very general programs to list, edit, and plot data on maps, to display profiles and time series, to draw and fill contours, to draw streamlines, to plot symbols for clouds, sky cover, and pressure tendency, and draw cross sections in the case of gridded data and sounding data. In addition, there are Barnes objective analysis programs to grid surface and upper-air data. The programs include the capabilities to derive meteorological parameters from those found in the dataset, to perform vertical interpolations of sounding data to different coordinate systems, and to compute an extensive set of gridded diagnostic quantities by specifying various nested combinations of scalars and vector arithmetic, algebraic, and differential operators. The GEMPAK 5.1 graphics/transformation subsystem, GEMPLT, provides device-independent graphics. GEMPLT also has the capability to display output in a variety of map projections or overlaid on satellite imagery. GEMPAK 5.1 is written in FORTRAN 77 and C-language and has been implemented on VAX computers under VMS and on computers running the UNIX operating system. During installation and normal use, this package occupies approximately 100Mb of hard disk space. The UNIX version of GEMPAK includes drivers for several graphic output systems including MIT's X Window System (X11,R4), Sun GKS, PostScript (color and monochrome), Silicon Graphics, and others. The VMS version of GEMPAK also includes drivers for several graphic output systems including PostScript (color and monochrome). The VMS version is delivered with the object code for the Transportable Applications Environment (TAE) program, version 4.1 which serves as a user interface. A color monitor is recommended for displaying maps on video display devices. Data for rendering regional maps is included with this package. The standard distribution medium for the UNIX version of GEMPAK 5.1 is a .25 inch streaming magnetic tape cartridge in UNIX tar format. The standard distribution medium for the VMS version of GEMPAK 5.1 is a 6250 BPI 9-track magnetic tape in DEC VAX BACKUP format. The VMS version is also available on a TK50 tape cartridge in DEC VAX BACKUP format. This program was developed in 1985. The current version, GEMPAK 5.1, was released in 1992. The package is delivered with source code. An extensive collection of subroutine libraries allows users to format data for use by GEMPAK, to develop new programs, and to enhance existing ones.

The Easy Way to Create Computer Slide Shows.

ERIC Educational Resources Information Center

Anderson, Mary Alice

1995-01-01

Discusses techniques for creating computer slide shows. Topics include memory; format; color use; HyperCard and CD-ROM; font styles and sizes; graphs and graphics; the slide show option; special effects; and tips for effective presentation. (Author/AEF)

CD Recorders.

ERIC Educational Resources Information Center

Falk, Howard

1998-01-01

Discussion of CD (compact disc) recorders describes recording applications, including storing large graphic files, creating audio CDs, and storing material downloaded from the Internet; backing up files; lifespan; CD recording formats; continuous recording; recording software; recorder media; vulnerability of CDs; basic computer requirements; and…

17 CFR 229.1111 - (Item 1111) Pool assets.

Code of Federal Regulations, 2010 CFR

2010-04-01

... information for the asset pool, including statistical information regarding delinquencies and losses. (d.... Present statistical information in tabular or graphical format, if such presentation will aid understanding. Present statistical information in appropriate distributional groups or incremental ranges in...

Conversion of NIMROD simulation results for graphical analysis using VisIt

DOE Office of Scientific and Technical Information (OSTI.GOV)

Romero-Talamas, C A

Software routines developed to prepare NIMROD [C. R. Sovinec et al., J. Comp. Phys. 195, 355 (2004)] results for three-dimensional visualization from simulations of the Sustained Spheromak Physics Experiment (SSPX ) [E. B. Hooper et al., Nucl. Fusion 39, 863 (1999)] are presented here. The visualization is done by first converting the NIMROD output to a format known as legacy VTK and then loading it to VisIt, a graphical analysis tool that includes three-dimensional rendering and various mathematical operations for large data sets. Sample images obtained from the processing of NIMROD data with VisIt are included.

Measures for preventing wrong-way entries on highways.

DOT National Transportation Integrated Search

1973-01-01

An evaluation of the results of a two-year survey of incidents of wrong-way driving on Virginia highways revealed that the majority of them originated at diamond type interchanges. On-site investigations of a number of the interchanges at which insta...

Implementation and transition of data interchange for geotechnical and geoenvironmental specialists (DIGGS v2.0).

DOT National Transportation Integrated Search

2017-01-01

Data Interchange for Geotechnical and Geoenvironmental Specialists (DIGGS) is an XML-based system : developed under a Federal Highway Administration (FHWA) State Pooled Funding Study led by the : Ohio Department of Transportation (ODOT) from 2005 to ...

77 FR 26604 - Progressive Rail, Incorporated-Lease and Operation Exemption-Rail Line of Union Pacific Railroad...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-05-04

... contains an interchange commitment with substantial economic rewards for PGR if it interchanges with UP. One has to wonder why such an economic incentive is necessary if there is little chance that PGR would...

78 FR 62352 - Proposed Agency Information Collection Activities; Comment Request

Federal Register 2010, 2011, 2012, 2013, 2014

2013-10-18

... or summary information concerning the costs incurred, and interchange transaction fees charged or... basis) aggregate or summary information concerning the costs incurred, and interchange transaction fees... costs and fixed costs, and to instruct respondents to exclude transactions monitoring from the...

Computer Analysis of Air Pollution from Highways, Streets, and Complex Interchanges

DOT National Transportation Integrated Search

1974-03-01

A detailed computer analysis of air quality for a complex highway interchange was prepared, using an in-house version of the Environmental Protection Agency's Gaussian Highway Line Source Model. This analysis showed that the levels of air pollution n...

Complete intersections : a guide to reconstructing intersections and interchanges for bicyclists and pedestrians.

DOT National Transportation Integrated Search

2010-01-01

Intersections and interchanges are major points of conflict for road users and are the frequent site of injuries and fatalities. In California, nearly 20 percent of pedestrian fatalities, and nearly a quarter of bicyclist fatalities occur at intersec...

Relationship between interchange usage and risk of hamstring injuries in the Australian Football League.

PubMed

Orchard, John W; Driscoll, Tim; Seward, Hugh; Orchard, Jessica J

2012-05-01

To study risk factors for hamstring injury in the Australian Football League (AFL), in particular the effect of recent changes in match participation (increased use of the interchange bench) on hamstring injury. Analysis of hamstring match injury statistics extracted from an injury database combined with match participation statistics extracted from a player statistics database. 56,320 player matches in the AFL over the period 2003-2010 were analyzed, in which 416 hamstring injuries occurred. In a Generalized Estimating Equation (GEE) analysis accounting for clustering of different teams, significant predictors of hamstring injuries were recent hamstring injury (RR 4.16, 95% CI 3.19-5.43), past history of ACL reconstruction (RR 1.69, 95% CI 1.09-2.60), past history of calf injury (RR 1.58, 95% CI 1.37-1.82), opposition team making 60 or more interchanges during the game (RR 1.38, 95% CI 1.12-1.68) and player having made 7 or more interchanges off the field in the last 3 weeks (protective RR 0.74, 95% CI 0.59-0.93). These findings suggest that regular interchanges protect individual players against hamstring injuries, but increase the risk of hamstring injury for opposition players. These findings can be explained by a model in which both fatigue and average match running speed are risk factors for hamstring injury. A player who returns to the ground after a rest on the interchange bench may himself have some short-term protection against hamstring injury because of the reduced fatigue, but his rested state may contribute to increased average running speed for his direct opponent, increasing the risk of injury for players on the opposition team. Copyright © 2011 Sports Medicine Australia. Published by Elsevier Ltd. All rights reserved.

Design of the BRISC study: a multicentre controlled clinical trial to optimize the communication of breast cancer risks in genetic counselling.

PubMed

Ockhuysen-Vermey, Caroline F; Henneman, Lidewij; van Asperen, Christi J; Oosterwijk, Jan C; Menko, Fred H; Timmermans, Daniëlle R M

2008-10-03

Understanding risks is considered to be crucial for informed decision-making. Inaccurate risk perception is a common finding in women with a family history of breast cancer attending genetic counseling. As yet, it is unclear how risks should best be communicated in clinical practice. This study protocol describes the design and methods of the BRISC (Breast cancer RISk Communication) study evaluating the effect of different formats of risk communication on the counsellee's risk perception, psychological well-being and decision-making regarding preventive options for breast cancer. The BRISC study is designed as a pre-post-test controlled group intervention trial with repeated measurements using questionnaires. The intervention-an additional risk consultation-consists of one of 5 conditions that differ in the way counsellee's breast cancer risk is communicated: 1) lifetime risk in numerical format (natural frequencies, i.e. X out of 100), 2) lifetime risk in both numerical format and graphical format (population figures), 3) lifetime risk and age-related risk in numerical format, 4) lifetime risk and age-related risk in both numerical format and graphical format, and 5) lifetime risk in percentages. Condition 6 is the control condition in which no intervention is given (usual care). Participants are unaffected women with a family history of breast cancer attending one of three participating clinical genetic centres in the Netherlands. The BRISC study allows for an evaluation of the effects of different formats of communicating breast cancer risks to counsellees. The results can be used to optimize risk communication in order to improve informed decision-making among women with a family history of breast cancer. They may also be useful for risk communication in other health-related services. Current Controlled Trials ISRCTN14566836.

Integrated Chronology, Flora and Faunas, and Paleoecology of the Alajuela Formation, Late Miocene of Panama

PubMed Central

MacFadden, Bruce J.; Jones, Douglas S.; Jud, Nathan A.; Moreno-Bernal, Jorge W.; Morgan, Gary S.; Portell, Roger W.; Perez, Victor J.; Moran, Sean M.; Wood, Aaron R.

2017-01-01

The late Miocene was an important time to understand the geological, climatic, and biotic evolution of the ancient New World tropics and the context for the Great American Biotic Interchange (GABI). Despite this importance, upper Miocene deposits containing diverse faunas and floras and their associated geological context are rare in Central America. We present an integrated study of the geological and paleontological context and age of a new locality from Lago Alajuela in northern Panama (Caribbean side) containing late Miocene marine and terrestrial fossils (plants, invertebrates, and vertebrates) from the Alajuela Formation. These taxa indicate predominantly estuarine and shallow marine paleoenvironments, along with terrestrial influences based on the occurrence of land mammals. Sr-isotope ratio analyses of in situ scallop shells indicate an age for the Alajuela Formation of 9.77 ± 0.22 Ma, which also equates to a latest Clarendonian (Cl3) North American Land Mammal Age. Along with the roughly contemporaneous late Miocene Gatun and Lago Bayano faunas in Panama, we now have the opportunity to reconstruct the dynamics of the Central America seaway that existed before final closure coincident with formation of the Isthmus of Panama. PMID:28107398

78 FR 12322 - Agency Information Collection Activities: OMB Review; Comment Request

Federal Register 2010, 2011, 2012, 2013, 2014

2013-02-22

... Interchange (EDI) Registration and Electronic Data Interchange (EDI) Enrollment Form; Use: The purpose of this... identification of Medicare providers/suppliers and authorization of requested Electronic Data Interface (EDI) functions. The EDI Enrollment and the Medicare Registration Forms are completed by Medicare providers...

Traffic Analysis For Highway-To-Highway Interchanges On Automated Highway Systems, Congestion In Absence Of Dedicated Ramps

DOT National Transportation Integrated Search

1997-01-01

SPECIAL CONNECTOR RAMPS LINKING THE AUTOMATED LANES AT AUTOMATED HIGHWAY-TO-AUTOMATED HIGHWAY INTERCHANGES MAY BE NEEDED TO ENABLE CONTINUOUS AUTOMATED DRIVING BETWEEN TWO CROSSING HIGHWAYS. ALTHOUGH A TYPICAL CLOVERLEAF CONFIGURATION HAS ONLY TWO LE...

FDA Guidance on Biosimilar Interchangeability Elicits Diverse Views: Current and Potential Marketers Complain About Too-High Hurdles.

PubMed

Barlas, Stephen

2017-08-01

Pharmaceutical industry sectors are at odds as the Food and Drug Administration seeks to define "interchangeability" for biosimilars. The battle lines vary by topic, but biosimilar marketers, health plans, and drugstores are generally urging lower hurdles.

19 CFR 122.50 - General order merchandise.

Code of Federal Regulations, 2010 CFR

2010-04-01

... appropriate Customs-authorized electronic data interchange system. Failure to provide such notification may...-authorized electronic data interchange system. If the party fails to notify Customs of the unentered... merchandise or baggage to a bonded warehouse certified by the port director as qualified to receive general...

19 CFR 4.37 - General order.

Code of Federal Regulations, 2011 CFR

2011-04-01

... writing or by any appropriate Customs-authorized electronic data interchange system. Failure to provide... appropriate Customs-authorized electronic data interchange system. If the party fails to notify Customs of the... and unentered merchandise or baggage to a bonded warehouse certified by the port director as qualified...

19 CFR 122.50 - General order merchandise.

Code of Federal Regulations, 2011 CFR

2011-04-01

... appropriate Customs-authorized electronic data interchange system. Failure to provide such notification may...-authorized electronic data interchange system. If the party fails to notify Customs of the unentered... merchandise or baggage to a bonded warehouse certified by the port director as qualified to receive general...

19 CFR 4.37 - General order.

Code of Federal Regulations, 2010 CFR

2010-04-01

... writing or by any appropriate Customs-authorized electronic data interchange system. Failure to provide... appropriate Customs-authorized electronic data interchange system. If the party fails to notify Customs of the... and unentered merchandise or baggage to a bonded warehouse certified by the port director as qualified...

19 CFR 123.10 - General order merchandise.

Code of Federal Regulations, 2011 CFR

2011-04-01

... shall be provided in writing or by any appropriate Customs-authorized electronic data interchange system... any appropriate Customs-authorized electronic data interchange system. If the party fails to notify... unreleased and unentered merchandise or baggage to a bonded warehouse certified by the port director as...

19 CFR 123.10 - General order merchandise.

Code of Federal Regulations, 2010 CFR

2010-04-01

... shall be provided in writing or by any appropriate Customs-authorized electronic data interchange system... any appropriate Customs-authorized electronic data interchange system. If the party fails to notify... unreleased and unentered merchandise or baggage to a bonded warehouse certified by the port director as...

76 FR 43477 - Debit Card Interchange Fees and Routing

Federal Register 2010, 2011, 2012, 2013, 2014

2011-07-20

...The Board is adopting an interim final rule and requesting comment on provisions in Regulation II (Debit Card Interchange Fees and Routing) adopted in accordance with Section 920(a)(5) of the Electronic Fund Transfer Act, which governs adjustments to debit interchange transaction fees for fraud-prevention costs. The provisions allow an issuer to receive an adjustment of 1 cent to its interchange transaction fee if the issuer develops, implements, and updates policies and procedures reasonably designed to identify and prevent fraudulent electronic debit transactions; monitor the incidence of, reimbursements received for, and losses incurred from fraudulent electronic debit transactions; respond appropriately to suspicious electronic debit transactions so as to limit the fraud losses that may occur and prevent the occurrence of future fraudulent electronic debit transactions; and secure debit card and cardholder data. If an issuer meets these standards and wishes to receive the adjustment, it must certify its eligibility to receive the fraud-prevention adjustment to the payment card networks in which the issuer participates.

The Myths and Realities of Simulations in Performance Technology.

ERIC Educational Resources Information Center

Thiagarajan, Sivasailam

1998-01-01

Examines misconceptions about simulations for performance technology concerning what they reflect, varieties, uses (instruction, awareness, performance assessment, team building, transfer, research, therapy), levels of fidelity, design approaches, formats (graphic models; card, race, and cyclical games; interactive fiction; production simulations;…

REGIONAL ASSESSMENT OF AQUIFER VULNERABILITY AND SENSITIVITY IN THE CONTERMINOUS UNITED STATES

EPA Science Inventory

This report provides, in a generalized, largely graphic format, are presentation of ground-water vulnerability, precipitation distribution, population density, potential well yield, and aquifer sensitivity for each of the 48 conterminous states. Classification scheme is developed...

Software Reviews: "Pow! Zap! Ker-plunk! The Comic Book Maker" (Pelican Software).

ERIC Educational Resources Information Center

Porter, Bernajean

1990-01-01

Reviews the newest addition to Pelican's Creative Writing Series of instructional software, which uses the comic book format to provide a unique writing environment for satire, symbolism, sequencing, and combining text and graphics to communicate ideas. (SR)

Efficient decentralized consensus protocols

NASA Technical Reports Server (NTRS)

Lakshman, T. V.; Agrawala, A. K.

1986-01-01

Decentralized consensus protocols are characterized by successive rounds of message interchanges. Protocols which achieve a consensus in one round of message interchange require O(N-squared) messages, where N is the number of participants. In this paper, a communication scheme, based on finite projective planes, which requires only O(N sq rt N) messages for each round is presented. Using this communication scheme, decentralized consensus protocols which achieve a consensus within two rounds of message interchange are developed. The protocols are symmetric, and the communication scheme does not impose any hierarchical structure. The scheme is illustrated using blocking and nonblocking commit protocols, decentralized extrema finding, and computation of the sum function.

Analysis of ISO NE Balancing Requirements: Uncertainty-based Secure Ranges for ISO New England Dynamic Inerchange Adjustments

DOE Office of Scientific and Technical Information (OSTI.GOV)

Etingov, Pavel V.; Makarov, Yuri V.; Wu, Di

The document describes detailed uncertainty quantification (UQ) methodology developed by PNNL to estimate secure ranges of potential dynamic intra-hour interchange adjustments in the ISO-NE system and provides description of the dynamic interchange adjustment (DINA) tool developed under the same contract. The overall system ramping up and down capability, spinning reserve requirements, interchange schedules, load variations and uncertainties from various sources that are relevant to the ISO-NE system are incorporated into the methodology and the tool. The DINA tool has been tested by PNNL and ISO-NE staff engineers using ISO-NE data.

Members of the S&T Partnership Forum Meet for an In-Space Assembly Technical Interchange Meeting on September 6th, 2017

NASA Image and Video Library

2017-09-06

WASHINGTON, D.C.---S&T Partnership Forum In-Space Assembly Technical Interchange Meeting-On September 6th 2017, many of the United States government experts on In-Space Assembly met at the U.S. Naval Research Lab to discuss both technology development and in-space applications that would advance national capabilities in this area. Expertise from NASA, USAF, NRO, DARPA and NRL met in this meeting which was coordinated by the NASA Headquarters, Office of the Chief Technologist. This technical interchange meeting was the second meeting of the members of this Science and Technology Partnership Forum.

Grammar-based Automatic 3D Model Reconstruction from Terrestrial Laser Scanning Data

NASA Astrophysics Data System (ADS)

Yu, Q.; Helmholz, P.; Belton, D.; West, G.

2014-04-01

The automatic reconstruction of 3D buildings has been an important research topic during the last years. In this paper, a novel method is proposed to automatically reconstruct the 3D building models from segmented data based on pre-defined formal grammar and rules. Such segmented data can be extracted e.g. from terrestrial or mobile laser scanning devices. Two steps are considered in detail. The first step is to transform the segmented data into 3D shapes, for instance using the DXF (Drawing Exchange Format) format which is a CAD data file format used for data interchange between AutoCAD and other program. Second, we develop a formal grammar to describe the building model structure and integrate the pre-defined grammars into the reconstruction process. Depending on the different segmented data, the selected grammar and rules are applied to drive the reconstruction process in an automatic manner. Compared with other existing approaches, our proposed method allows the model reconstruction directly from 3D shapes and takes the whole building into account.

An XML-based interchange format for genotype-phenotype data.

PubMed

Whirl-Carrillo, M; Woon, M; Thorn, C F; Klein, T E; Altman, R B

2008-02-01

Recent advances in high-throughput genotyping and phenotyping have accelerated the creation of pharmacogenomic data. Consequently, the community requires standard formats to exchange large amounts of diverse information. To facilitate the transfer of pharmacogenomics data between databases and analysis packages, we have created a standard XML (eXtensible Markup Language) schema that describes both genotype and phenotype data as well as associated metadata. The schema accommodates information regarding genes, drugs, diseases, experimental methods, genomic/RNA/protein sequences, subjects, subject groups, and literature. The Pharmacogenetics and Pharmacogenomics Knowledge Base (PharmGKB; www.pharmgkb.org) has used this XML schema for more than 5 years to accept and process submissions containing more than 1,814,139 SNPs on 20,797 subjects using 8,975 assays. Although developed in the context of pharmacogenomics, the schema is of general utility for exchange of genotype and phenotype data. We have written syntactic and semantic validators to check documents using this format. The schema and code for validation is available to the community at http://www.pharmgkb.org/schema/index.html (last accessed: 8 October 2007). (c) 2007 Wiley-Liss, Inc.

SpineCreator: a Graphical User Interface for the Creation of Layered Neural Models.

PubMed

Cope, A J; Richmond, P; James, S S; Gurney, K; Allerton, D J

2017-01-01

There is a growing requirement in computational neuroscience for tools that permit collaborative model building, model sharing, combining existing models into a larger system (multi-scale model integration), and are able to simulate models using a variety of simulation engines and hardware platforms. Layered XML model specification formats solve many of these problems, however they are difficult to write and visualise without tools. Here we describe a new graphical software tool, SpineCreator, which facilitates the creation and visualisation of layered models of point spiking neurons or rate coded neurons without requiring the need for programming. We demonstrate the tool through the reproduction and visualisation of published models and show simulation results using code generation interfaced directly into SpineCreator. As a unique application for the graphical creation of neural networks, SpineCreator represents an important step forward for neuronal modelling.

AVE-SESAME program for the REEDA System

NASA Technical Reports Server (NTRS)

Hickey, J. S.

1981-01-01

The REEDA system software was modified and improved to process the AVE-SESAME severe storm data. A random access file system for the AVE storm data was designed, tested, and implemented. The AVE/SESAME software was modified to incorporate the random access file input and to interface with new graphics hardware/software now available on the REEDA system. Software was developed to graphically display the AVE/SESAME data in the convention normally used by severe storm researchers. Software was converted to AVE/SESAME software systems and interfaced with existing graphics hardware/software available on the REEDA System. Software documentation was provided for existing AVE/SESAME programs underlining functional flow charts and interacting questions. All AVE/SESAME data sets in random access format was processed to allow developed software to access the entire AVE/SESAME data base. The existing software was modified to allow for processing of different AVE/SESAME data set types including satellite surface and radar data.

A flexible flight display research system using a ground-based interactive graphics terminal

NASA Technical Reports Server (NTRS)

Hatfield, J. J.; Elkins, H. C.; Batson, V. M.; Poole, W. L.

1975-01-01

Requirements and research areas for the air transportation system of the 1980 to 1990's were reviewed briefly to establish the need for a flexible flight display generation research tool. Specific display capabilities required by aeronautical researchers are listed and a conceptual system for providing these capabilities is described. The conceptual system uses a ground-based interactive graphics terminal driven by real-time radar and telemetry data to generate dynamic, experimental flight displays. These displays are scan converted to television format, processed, and transmitted to the cockpits of evaluation aircraft. The attendant advantages of a Flight Display Research System (FDRS) designed to employ this concept are presented. The detailed implementation of an FDRS is described. The basic characteristics of the interactive graphics terminal and supporting display electronic subsystems are presented and the resulting system capability is summarized. Finally, the system status and utilization are reviewed.

A synthesis of research on color, typography and graphics as they relate to readability

NASA Astrophysics Data System (ADS)

Lamoreaux, M. E.

1985-09-01

A foundation for future research on the use of color, typography, and graphics to improve readability is provided. Articles from the broad fields of education and psychology, as well as from the fields of journalism and printing, have been reviewed for research relating color, typography, and graphics to reading ease, speed, or comprehension. The most relevant articles reviewed are presented in an annoated bibliography; the remaining articles are also presented in bibliographic format. This literature review indicates that recognition and recall of printed material may be improved through the use of headings, underlining, color, and, especially, illustrations. Current research suggests that individuals can remember pictures far longer than past research indicates. However, researchers are divided on the usefulness of illustrations to improve reading comprehension. On the other hand, reading comprehension can be improved through the use of statistical graphs and tables if the reader is properly trained in the use of these devices.

EnviroNET: An online environmental interactions resource

NASA Technical Reports Server (NTRS)

Lauriente, Michael

1991-01-01

EnviroNET is a centralized depository for technical information on environmentally induced interactions likely to be encountered by spacecraft in both low-altitude and high-altitude orbits. It provides a user-friendly, menu-driven format on networks that are connected globally and is available 24 hours a day - every day. The service pools space data collected over the years by NASA, USAF, other government research facilities, industry, universities, and the European Space Agency. This information contains text, tables and over one hundred high resolution figures and graphs based on empirical data. These graphics can be accessed while still in the chapters, making it easy to flip from text to graphics and back. Interactive graphics programs are also available on space debris, the neutral atmosphere, magnetic field, and ionosphere. EnviroNET can help designers meet tough environmental flight criteria before committing to flight hardware built for experiments, instrumentation, or payloads.

The influence of graphic display format on the interpretations of quantitative risk information among adults with lower education and literacy: a randomized experimental study.

PubMed

McCaffery, Kirsten J; Dixon, Ann; Hayen, Andrew; Jansen, Jesse; Smith, Sian; Simpson, Judy M

2012-01-01

To test optimal graphic risk communication formats for presenting small probabilities using graphics with a denominator of 1000 to adults with lower education and literacy. A randomized experimental study, which took place in adult basic education classes in Sydney, Australia. The participants were 120 adults with lower education and literacy. An experimental computer-based manipulation compared 1) pictographs in 2 forms, shaded "blocks" and unshaded "dots"; and 2) bar charts across different orientations (horizontal/vertical) and numerator size (small <100, medium 100-499, large 500-999). Accuracy (size of error) and ease of processing (reaction time) were assessed on a gist task (estimating the larger chance of survival) and a verbatim task (estimating the size of difference). Preferences for different graph types were also assessed. Accuracy on the gist task was very high across all conditions (>95%) and not tested further. For the verbatim task, optimal graph type depended on the numerator size. For small numerators, pictographs resulted in fewer errors than bar charts (blocks: odds ratio [OR] = 0.047, 95% confidence interval [CI] = 0.023-0.098; dots: OR = 0.049, 95% CI = 0.024-0.099). For medium and large numerators, bar charts were more accurate (e.g., medium dots: OR = 4.29, 95% CI = 2.9-6.35). Pictographs were generally processed faster for small numerators (e.g., blocks: 14.9 seconds v. bars: 16.2 seconds) and bar charts for medium or large numerators (e.g., large blocks: 41.6 seconds v. 26.7 seconds). Vertical formats were processed slightly faster than horizontal graphs with no difference in accuracy. Most participants preferred bar charts (64%); however, there was no relationship with performance. For adults with low education and literacy, pictographs are likely to be the best format to use when displaying small numerators (<100/1000) and bar charts for larger numerators (>100/1000).

Learning Across Cultures: Intercultural Communication and International Educational Exchange.

ERIC Educational Resources Information Center

Althen, Gary, Ed.; And Others

Aspects of intercultural educational activity, research on learning, and implications for educational interchange, and case studies of the application of ideas from the intercultural communication field to work in international educational interchange are addressed in nine papers. Contents include: "Dynamics of Cross-cultural Adjustment: from…

Electronic Data Interchange (EDI) for Libraries and Publishers.

ERIC Educational Resources Information Center

Santosuosso, Joe

1992-01-01

Defines electronic data interchange (EDI) as the exchange of data between computer systems without human intervention or interpretation. Standards are discussed; and the implementation of EDI in libraries and the serials publishing community in the areas of orders and acquisitions, claims, and invoice processing is described. (LRW)

Costs and benefits of strategic acquisition of limited access right-of-way at freeway interchange areas

DOT National Transportation Integrated Search

2004-11-01

The purpose of this research is to assess the cost effectiveness of purchasing additional limited access right-of-way at the time of construction in lieu of retrofitting interchange areas after functional failure. The findings indicate that the long ...

2014 Trans-Atlantic Research and Development Interchange on Sustainability (Tardis 2014): Summary of Discussions

EPA Science Inventory

The Trans-Atlantic Research and Development Interchange on Sustainability (TARDIS) has been bringing together a select group of scientists and engineers for in-depth discussions on sustainability on a bi-annual basis since 2004. TARDIS 2014 included twenty eight individuals from ...

Focus on Nutrition. MCH Program Interchange.

ERIC Educational Resources Information Center

National Center for Education in Maternal and Child Health, Washington, DC.

This issue of the "MCH Program Interchange" describes selected materials and publications in maternal and child health (MCH) nutrition services and programs. The materials were developed by or are available from federal agencies, state and local public health agencies, and voluntary and professional organizations. The information is intended to…

Common Pitfalls in F77 Code Conversion

DTIC Science & Technology

2003-02-01

implementation versus another are the source of these errors rather than typography . It is well to use the practice of commenting-out original source file lines...identifier), every I in the format field must be replaced with f followed by an appropriate floating point format designator . Floating point numeric...helps even more. Finally, libraries are a major source of non-portablility[sic], with graphics libraries one of the chief culprits. We in Fusion

Command Center Library Model Document. Comprehensive Approach to Reusable Defense Software (CARDS)

DTIC Science & Technology

1992-05-31

system, and functionality for specifying the layout of the document. 3.7.16.1 FrameMaker FrameMaker is a Commercial Off The Shelf (COTS) component...facilitating WYSIWYG creation of formatted reports with embedded graphics. FrameMaker is an advanced publishing tool that integrates word processing...available for the component FrameMaker : * Product evaluation reports in ASCII and postscript formats • Product assessment on line in model 0 Product

Dynamics of Coronal Hole Boundaries

DOE Office of Scientific and Technical Information (OSTI.GOV)

Higginson, A. K.; Zurbuchen, T. H.; Antiochos, S. K.

Remote and in situ observations strongly imply that the slow solar wind consists of plasma from the hot, closed-field corona that is released onto open magnetic field lines. The Separatrix Web theory for the slow wind proposes that photospheric motions at the scale of supergranules are responsible for generating dynamics at coronal-hole boundaries, which result in the closed plasma release. We use three-dimensional magnetohydrodynamic simulations to determine the effect of photospheric flows on the open and closed magnetic flux of a model corona with a dipole magnetic field and an isothermal solar wind. A rotational surface motion is used tomore » approximate photospheric supergranular driving and is applied at the boundary between the coronal hole and helmet streamer. The resulting dynamics consist primarily of prolific and efficient interchange reconnection between open and closed flux. The magnetic flux near the coronal-hole boundary experiences multiple interchange events, with some flux interchanging over 50 times in one day. Additionally, we find that the interchange reconnection occurs all along the coronal-hole boundary and even produces a lasting change in magnetic-field connectivity in regions that were not driven by the applied motions. Our results show that these dynamics should be ubiquitous in the Sun and heliosphere. We discuss the implications of our simulations for understanding the observed properties of the slow solar wind, with particular focus on the global-scale consequences of interchange reconnection.« less

Observations of a Small Interplanetary Magnetic Flux Rope Opening by Interchange Reconnection

NASA Astrophysics Data System (ADS)

Wang, J. M.; Feng, H. Q.; Zhao, G. Q.

2018-01-01

Interchange reconnection, specifically magnetic reconnection between open magnetic fields and closed magnetic flux ropes, plays a major role in the heliospheric magnetic flux budget. It is generally accepted that closed magnetic field lines of interplanetary magnetic flux ropes (IMFRs) can gradually open through reconnection between one of its legs and other open field lines until no closed field lines are left to contribute flux to the heliosphere. In this paper, we report an IMFR associated with a magnetic reconnection exhaust, whereby its closed field lines were opening by a magnetic reconnection event near 1 au. The reconnection exhaust and the following IMFR were observed on 2002 February 2 by both the Wind and ACE spacecraft. Observations on counterstreaming suprathermal electrons revealed that most magnetic field lines of the IMFR were closed, especially those after the front boundary of the IMFR, with both ends connected to the Sun. The unidirectional suprathermal electron strahls before the exhaust manifested the magnetic field lines observed before the exhaust was open. These observations provide direct evidence that closed field lines of IMFRs can be opened by interchange reconnection in interplanetary space. This is the first report of the closed field lines of IMFRs being opened by interchange reconnection in interplanetary space. This type of interplanetary interchange reconnection may pose important implications for balancing the heliospheric flux budget.

Simulating Operations at a Spaceport

NASA Technical Reports Server (NTRS)

Nevins, Michael R.

2007-01-01

SPACESIM is a computer program for detailed simulation of operations at a spaceport. SPACESIM is being developed to greatly improve existing spaceports and to aid in designing, building, and operating future spaceports, given that there is a worldwide trend in spaceport operations from very expensive, research- oriented launches to more frequent commercial launches. From an operational perspective, future spaceports are expected to resemble current airports and seaports, for which it is necessary to resolve issues of safety, security, efficient movement of machinery and people, cost effectiveness, timeliness, and maximizing effectiveness in utilization of resources. Simulations can be performed, for example, to (1) simultaneously analyze launches of reusable and expendable rockets and identify bottlenecks arising from competition for limited resources or (2) perform what-if scenario analyses to identify optimal scenarios prior to making large capital investments. SPACESIM includes an object-oriented discrete-event-simulation engine. (Discrete- event simulation has been used to assess processes at modern seaports.) The simulation engine is built upon the Java programming language for maximum portability. Extensible Markup Language (XML) is used for storage of data to enable industry-standard interchange of data with other software. A graphical user interface facilitates creation of scenarios and analysis of data.

VR Lab ISS Graphics Models Data Package

NASA Technical Reports Server (NTRS)

Paddock, Eddie; Homan, Dave; Bell, Brad; Miralles, Evely; Hoblit, Jeff

2016-01-01

All the ISS models are saved in AC3D model format which is a text based format that can be loaded into blender and exported to other formats from there including FBX. The models are saved in two different levels of detail, one being labeled "LOWRES" and the other labeled "HIRES". There are two ".str" files (HIRES _ scene _ load.str and LOWRES _ scene _ load.str) that give the hierarchical relationship of the different nodes and the models associated with each node for both the "HIRES" and "LOWRES" model sets. All the images used for texturing are stored in Windows ".bmp" format for easy importing.

New computer system simplifies programming of mathematical equations

NASA Technical Reports Server (NTRS)

Reinfelds, J.; Seitz, R. N.; Wood, L. H.

1966-01-01

Automatic Mathematical Translator /AMSTRAN/ permits scientists or engineers to enter mathematical equations in their natural mathematical format and to obtain an immediate graphical display of the solution. This automatic-programming, on-line, multiterminal computer system allows experienced programmers to solve nonroutine problems.

GERTS GQ User's Manual.

ERIC Educational Resources Information Center

Akiba, Y.; And Others

This user's manual for the simulation program Graphical Evaluation and Review Technique (GERT) GQ contains sections on nodes, branches, program input description and format, and program output, as well as examples. Also included is a programmer's manual which contains information on scheduling, subroutine descriptions, COMMON Variables, and…

AAPG exchange format for transfer of geologic and petroleum data

DOE Office of Scientific and Technical Information (OSTI.GOV)

Shaw, B.R.; Waller, H.

1989-03-01

One of the most pressing problems of petroleum geology is transferring and exchanging data between sources. Possibly the most significant issue facing their industry is the ability to communicate. The expense and huge effort involved in all aspects of data management are expanding at a rate proportional to the number of individual data bases and software formats being created daily. There must be a common, public format to exchange information to ensure the transfer of data between all aspects of their industry. The AAPG has the opportunity to take a leadership role in addressing this problem by creating an exchangemore » format. There are five basic objectives for the proposed exchange format: (1) provide a mechanism for the exchange of digital geologic data structures, (2) provide an interchange model for the development of related geologic data, (3) facilitate effective communication between commercial data and users, (4) provide a public format independent proprietary formats and implementation environments, and (5) provide a basis for future growth and development. The proposed exchange format is intended for use by the general geologic community but is based upon many concepts currently implemented in the petroleum and natural gas industry. As such, there are no predefined terms or standards either implied or required. Eventually the format must evolve into relational structures, which will require a concept and relation definition; but there is not intent to impose compliance or conformity of the data itself. Ultimately, the effectiveness of this exchange format will be proven by the user community.« less

ESDAPT - APT PROGRAMMING EDITOR AND INTERPRETER

NASA Technical Reports Server (NTRS)

Premack, T.

1994-01-01

ESDAPT is a graphical programming environment for developing APT (Automatically Programmed Tool) programs for controlling numerically controlled machine tools. ESDAPT has a graphical user interface that provides the user with an APT syntax sensitive text editor and windows for displaying geometry and tool paths. APT geometry statement can also be created using menus and screen picks. ESDAPT interprets APT geometry statements and displays the results in its view windows. Tool paths are generated by batching the APT source to an APT processor (COSMIC P-APT recommended). The tool paths are then displayed in the view windows. Hardcopy output of the view windows is in color PostScript format. ESDAPT is written in C-language, yacc, lex, and XView for use on Sun4 series computers running SunOS. ESDAPT requires 4Mb of disk space, 7Mb of RAM, and MIT's X Window System, Version 11 Release 4, or OpenWindows version 3 for execution. Program documentation in PostScript format and an executable for OpenWindows version 3 are provided on the distribution media. The standard distribution medium for ESDAPT is a .25 inch streaming magnetic tape cartridge (Sun QIC-24) in UNIX tar format. This program was developed in 1992.

A collection of open source applications for mass spectrometry data mining.

PubMed

Gallardo, Óscar; Ovelleiro, David; Gay, Marina; Carrascal, Montserrat; Abian, Joaquin

2014-10-01

We present several bioinformatics applications for the identification and quantification of phosphoproteome components by MS. These applications include a front-end graphical user interface that combines several Thermo RAW formats to MASCOT™ Generic Format extractors (EasierMgf), two graphical user interfaces for search engines OMSSA and SEQUEST (OmssaGui and SequestGui), and three applications, one for the management of databases in FASTA format (FastaTools), another for the integration of search results from up to three search engines (Integrator), and another one for the visualization of mass spectra and their corresponding database search results (JsonVisor). These applications were developed to solve some of the common problems found in proteomic and phosphoproteomic data analysis and were integrated in the workflow for data processing and feeding on our LymPHOS database. Applications were designed modularly and can be used standalone. These tools are written in Perl and Python programming languages and are supported on Windows platforms. They are all released under an Open Source Software license and can be freely downloaded from our software repository hosted at GoogleCode. © 2014 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Embedding and Publishing Interactive, 3-Dimensional, Scientific Figures in Portable Document Format (PDF) Files

PubMed Central

Barnes, David G.; Vidiassov, Michail; Ruthensteiner, Bernhard; Fluke, Christopher J.; Quayle, Michelle R.; McHenry, Colin R.

2013-01-01

With the latest release of the S2PLOT graphics library, embedding interactive, 3-dimensional (3-d) scientific figures in Adobe Portable Document Format (PDF) files is simple, and can be accomplished without commercial software. In this paper, we motivate the need for embedding 3-d figures in scholarly articles. We explain how 3-d figures can be created using the S2PLOT graphics library, exported to Product Representation Compact (PRC) format, and included as fully interactive, 3-d figures in PDF files using the movie15 LaTeX package. We present new examples of 3-d PDF figures, explain how they have been made, validate them, and comment on their advantages over traditional, static 2-dimensional (2-d) figures. With the judicious use of 3-d rather than 2-d figures, scientists can now publish, share and archive more useful, flexible and faithful representations of their study outcomes. The article you are reading does not have embedded 3-d figures. The full paper, with embedded 3-d figures, is recommended and is available as a supplementary download from PLoS ONE (File S2). PMID:24086243

Embedding and publishing interactive, 3-dimensional, scientific figures in Portable Document Format (PDF) files.

PubMed

Barnes, David G; Vidiassov, Michail; Ruthensteiner, Bernhard; Fluke, Christopher J; Quayle, Michelle R; McHenry, Colin R

2013-01-01

With the latest release of the S2PLOT graphics library, embedding interactive, 3-dimensional (3-d) scientific figures in Adobe Portable Document Format (PDF) files is simple, and can be accomplished without commercial software. In this paper, we motivate the need for embedding 3-d figures in scholarly articles. We explain how 3-d figures can be created using the S2PLOT graphics library, exported to Product Representation Compact (PRC) format, and included as fully interactive, 3-d figures in PDF files using the movie15 LaTeX package. We present new examples of 3-d PDF figures, explain how they have been made, validate them, and comment on their advantages over traditional, static 2-dimensional (2-d) figures. With the judicious use of 3-d rather than 2-d figures, scientists can now publish, share and archive more useful, flexible and faithful representations of their study outcomes. The article you are reading does not have embedded 3-d figures. The full paper, with embedded 3-d figures, is recommended and is available as a supplementary download from PLoS ONE (File S2).

78 FR 54589 - Information Required in Notices and Petitions Containing Interchange Commitments

Federal Register 2010, 2011, 2012, 2013, 2014

2013-09-05

... Chairman Begeman, dissenting: I did not object to the Board's Notice of Proposed Rulemaking when it was... a third-party connecting carrier, whether by outright prohibition, per-car penalty, adjustment in... future interchange with a third-party connecting carrier, whether by outright prohibition, per-car...

A New Voice on Interchange: Is It Talking or Writing? Implications for the Teaching of Literature.

ERIC Educational Resources Information Center

McGrath, Carolyn

1998-01-01

Based on analysis of discussions of fiction using Dedalus Interchange in literary analysis classes, it was found that synchronous electronic conferencing exposed students to more viewpoints, deemphasized traditional authority, increased metalinguistic awareness, decreased inhibition and gender barriers, and facilitated increased social…

The Design of the CCCII and Its Application Considerations in Library Automation.

ERIC Educational Resources Information Center

Huang, Jack Kai-tung; And Others

This paper presents the major characteristics of the Chinese Character Code for Information Interchange (CCCII) and indicates its intended application for the interchange of Chinese information among computer systems and communication facilities, especially in library networks. It is considered sufficient for present day library applications,…

A numerical investigation into the performance of the soil nail wall and pile foundation at the Swift Delta I-5 Interchange.

DOT National Transportation Integrated Search

1993-12-01

Finite Difference Methods (FDM) and Finite Element Methods (FEM) studies are reported studying the soil nail wall construction at the Swift Delta I-5 Interchange bridge reconstruction in North Portland, Oregon. Five layers of soil nails were installe...

MCH Program Interchange. Focus on Adolescent Substance Abuse.

ERIC Educational Resources Information Center

National Center for Education in Maternal and Child Health, Washington, DC.

This issue of the Maternal and Child Health (MCH) Program Interchange provides information about selected materials and publications related to adolescent substance abuse. Its intent is to facilitate the exchange of information between those concerned with substance abuse at the federal, state, and local levels, within both the public and private…

Interchange. November 1972-July 1983.

ERIC Educational Resources Information Center

Brandhorst, Ted, Ed.

The Interchange newsletter is prepared irregularly (approximately semiannually) by the staff of the ERIC Processing and Reference Facility in order to communicate matters of interest to users of the ERIC database and of other ERIC products and services. Initially, the focus was on computer-oriented users who were receiving the ERIC magnetic tapes…

ERIC Users' Interchange, February 1988-March 1993.

ERIC Educational Resources Information Center

ERIC User's Interchange, 1993

1993-01-01

The Interchange newsletter is prepared semiannually by the staff of Access ERIC in order to communicate matters of interest to users of the ERIC database and of other ERIC products and services. The newsletter disseminates a broad spectrum of information pertaining to ERIC, including: price changes, microfiche products, ERIC Clearinghouse news,…

49 CFR Appendix C to Part 564 - Information Applicable to Standardized Sealed Beam Headlamp Units

Code of Federal Regulations, 2013 CFR

2013-10-01

... Standardized Sealed Beam Unit. A. Dimensions marked “I”, indicating interchangeability, for which conformance is mandatory. B. All other dimensions which are for design purposes. II. Dimensional Information... Sealed Beam Unit A. Dimensions marked “I”, indicating interchangeability, for which conformance is...

42 CFR 84.80 - Interchangeability of oxygen and air prohibited.

Code of Federal Regulations, 2011 CFR

2011-10-01

... 42 Public Health 1 2011-10-01 2011-10-01 false Interchangeability of oxygen and air prohibited. 84.80 Section 84.80 Public Health PUBLIC HEALTH SERVICE, DEPARTMENT OF HEALTH AND HUMAN SERVICES OCCUPATIONAL SAFETY AND HEALTH RESEARCH AND RELATED ACTIVITIES APPROVAL OF RESPIRATORY PROTECTIVE DEVICES Self...

42 CFR 84.80 - Interchangeability of oxygen and air prohibited.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 42 Public Health 1 2010-10-01 2010-10-01 false Interchangeability of oxygen and air prohibited. 84.80 Section 84.80 Public Health PUBLIC HEALTH SERVICE, DEPARTMENT OF HEALTH AND HUMAN SERVICES OCCUPATIONAL SAFETY AND HEALTH RESEARCH AND RELATED ACTIVITIES APPROVAL OF RESPIRATORY PROTECTIVE DEVICES Self...

42 CFR 84.80 - Interchangeability of oxygen and air prohibited.

Code of Federal Regulations, 2012 CFR

2012-10-01

... 42 Public Health 1 2012-10-01 2012-10-01 false Interchangeability of oxygen and air prohibited. 84.80 Section 84.80 Public Health PUBLIC HEALTH SERVICE, DEPARTMENT OF HEALTH AND HUMAN SERVICES OCCUPATIONAL SAFETY AND HEALTH RESEARCH AND RELATED ACTIVITIES APPROVAL OF RESPIRATORY PROTECTIVE DEVICES Self...

42 CFR 84.80 - Interchangeability of oxygen and air prohibited.

Code of Federal Regulations, 2014 CFR

2014-10-01

... 42 Public Health 1 2014-10-01 2014-10-01 false Interchangeability of oxygen and air prohibited. 84.80 Section 84.80 Public Health PUBLIC HEALTH SERVICE, DEPARTMENT OF HEALTH AND HUMAN SERVICES OCCUPATIONAL SAFETY AND HEALTH RESEARCH AND RELATED ACTIVITIES APPROVAL OF RESPIRATORY PROTECTIVE DEVICES Self...

42 CFR 84.80 - Interchangeability of oxygen and air prohibited.

Code of Federal Regulations, 2013 CFR

2013-10-01

... 42 Public Health 1 2013-10-01 2013-10-01 false Interchangeability of oxygen and air prohibited. 84.80 Section 84.80 Public Health PUBLIC HEALTH SERVICE, DEPARTMENT OF HEALTH AND HUMAN SERVICES OCCUPATIONAL SAFETY AND HEALTH RESEARCH AND RELATED ACTIVITIES APPROVAL OF RESPIRATORY PROTECTIVE DEVICES Self...

Air Quality Analysis of a Multilevel Complex Interchange : Case Study Using the Improved TSC/EPA Model

DOT National Transportation Integrated Search

1976-12-01

This report describes a case study of an air quality analysis prepared by the U.S. Department of Transportation (DOT), Transportation Systems Center (TSC). The site analyzed was the proposed I-83/I-95 interchange in Baltimore, Maryland. This intercha...

Creating Interactive Graphical Overlays in the Advanced Weather Interactive Processing System Using Shapefiles and DGM Files

NASA Technical Reports Server (NTRS)

Barrett, Joe H., III; Lafosse, Richard; Hood, Doris; Hoeth, Brian

2007-01-01

Graphical overlays can be created in real-time in the Advanced Weather Interactive Processing System (AWIPS) using shapefiles or Denver AWIPS Risk Reduction and Requirements Evaluation (DARE) Graphics Metafile (DGM) files. This presentation describes how to create graphical overlays on-the-fly for AWIPS, by using two examples of AWIPS applications that were created by the Applied Meteorology Unit (AMU) located at Cape Canaveral Air Force Station (CCAFS), Florida. The first example is the Anvil Threat Corridor Forecast Tool, which produces a shapefile that depicts a graphical threat corridor of the forecast movement of thunderstorm anvil clouds, based on the observed or forecast upper-level winds. This tool is used by the Spaceflight Meteorology Group (SMG) at Johnson Space Center, Texas and 45th Weather Squadron (45 WS) at CCAFS to analyze the threat of natural or space vehicle-triggered lightning over a location. The second example is a launch and landing trajectory tool that produces a DGM file that plots the ground track of space vehicles during launch or landing. The trajectory tool can be used by SMG and the 45 WS forecasters to analyze weather radar imagery along a launch or landing trajectory. The presentation will list the advantages and disadvantages of both file types for creating interactive graphical overlays in future AWIPS applications. Shapefiles are a popular format used extensively in Geographical Information Systems. They are usually used in AWIPS to depict static map backgrounds. A shapefile stores the geometry and attribute information of spatial features in a dataset (ESRI 1998). Shapefiles can contain point, line, and polygon features. Each shapefile contains a main file, index file, and a dBASE table. The main file contains a record for each spatial feature, which describes the feature with a list of its vertices. The index file contains the offset of each record from the beginning of the main file. The dBASE table contains records for each attribute. Attributes are commonly used to label spatial features. Shapefiles can be viewed, but not created in AWIPS. As a result, either third-party software can be installed on an AWIPS workstation, or new software must be written to create shapefiles in the correct format.

Interactive orbital proximity operations planning system

NASA Technical Reports Server (NTRS)

Grunwald, Arthur J.; Ellis, Stephen R.

1989-01-01

An interactive, graphical proximity operations planning system was developed which allows on-site design of efficient, complex, multiburn maneuvers in the dynamic multispacecraft environment about the space station. Maneuvering takes place in, as well as out of, the orbital plane. The difficulty in planning such missions results from the unusual and counterintuitive character of relative orbital motion trajectories and complex operational constraints, which are both time varying and highly dependent on the mission scenario. This difficulty is greatly overcome by visualizing the relative trajectories and the relative constraints in an easily interpretable, graphical format, which provides the operator with immediate feedback on design actions. The display shows a perspective bird's-eye view of the space station and co-orbiting spacecraft on the background of the station's orbital plane. The operator has control over two modes of operation: (1) a viewing system mode, which enables him or her to explore the spatial situation about the space station and thus choose and frame in on areas of interest; and (2) a trajectory design mode, which allows the interactive editing of a series of way-points and maneuvering burns to obtain a trajectory which complies with all operational constraints. Through a graphical interactive process, the operator will continue to modify the trajectory design until all operational constraints are met. The effectiveness of this display format in complex trajectory design is presently being evaluated in an ongoing experimental program.

Interchange Reconnection Associated with a Confined Filament Eruption: Implications for the Source of Transient Cold-dense Plasma in Solar Winds

DOE Office of Scientific and Technical Information (OSTI.GOV)

Zheng, Ruisheng; Chen, Yao; Wang, Bing

The cold-dense plasma is occasionally detected in the solar wind with in situ data, but the source of the cold-dense plasma remains illusive. Interchange reconnections (IRs) between closed fields and nearby open fields are known to contribute to the formation of solar winds. We present a confined filament eruption associated with a puff-like coronal mass ejection (CME) on 2014 December 24. The filament underwent successive activations and finally erupted, due to continuous magnetic flux cancelations and emergences. The confined erupting filament showed a clear untwist motion, and most of the filament material fell back. During the eruption, some tiny blobsmore » escaped from the confined filament body, along newly formed open field lines rooted around the south end of the filament, and some bright plasma flowed from the north end of the filament to remote sites at nearby open fields. The newly formed open field lines shifted southward with multiple branches. The puff-like CME also showed multiple bright fronts and a clear southward shift. All the results indicate an intermittent IR existed between closed fields of the confined erupting filament and nearby open fields, which released a portion of filament material (blobs) to form the puff-like CME. We suggest that the IR provides a possible source of cold-dense plasma in the solar wind.« less

Effect of NaCl addition during diafiltration on the solubility, hydrophobicity, and disulfide bonds of 80% milk protein concentrate powder.

PubMed

Mao, X Y; Tong, P S; Gualco, S; Vink, S

2012-07-01

We investigated the surface hydrophobicity index based on different fluorescence probes [1-anilinonaphthalene-8-sulfonic acid (ANS) and 6-propionyl-2-(N,N-dimethylamino)-naphthalene (PRODAN)], free sulfhydryl and disulfide bond contents, and particle size of 80% milk protein concentrate (MPC80) powders prepared by adding various amounts of NaCl (0, 50, 100, and 150 mM) during the diafiltration process. The solubility of MPC80 powder was not strictly related to surface hydrophobicity. The MPC80 powder obtained by addition of 150 mM NaCl during diafiltration had the highest solubility but also the highest ANS-based surface hydrophobicity, the lowest PRODAN-based surface hydrophobicity, and the least aggregate formation. Intermolecular disulfide bonds caused by sulfhydryl-disulfide interchange reactions and hydrophobic interactions may be responsible for the lower solubility of the control MPC80 powder. The enhanced solubility of MPC80 powder with addition of NaCl during diafiltration may result from the modified surface hydrophobicity, the reduced intermolecular disulfide bonds, and the associated decrease in mean particle size. Addition of NaCl during the diafiltration process can modify the strength of hydrophobic interactions and sulfhydryl-disulfide interchange reactions and thereby affect protein aggregation and the solubility of MPC powders. Copyright © 2012 American Dairy Science Association. Published by Elsevier Inc. All rights reserved.

A U.S. Geological Survey Data Standard (Specifications for representation of geographic point locations for information interchange)

USGS Publications Warehouse

,

1983-01-01

This standard establishes uniform formats for geographic point location data. Geographic point location refers to the use of a coordinate system to define the position of a point that may be on, above, or below the Earth's surface. It provides a means for representing these data in digital form for the purpose of interchanging information among data systems and improving clarity and accuracy of interpersonal communications. This document is an expansion and clarification of National Bureau of Standards FIPS PUB 70, issued October 24, 1980. There are minor editorial changes, plus the following additions and modifications: (I) The representation of latitude and longitude using radian measure was added. (2) Alternate 2 for Representation of Hemispheric Information was deleted. (3) Use of the maximum precision for all numerical values was emphasized. The Alternate Representation of Precision was deleted. (4) The length of the zone representation for the State Plane Coordinate System was standardized. (5) The term altitude was substituted for elevation throughout to conform with international usage. (6) Section 3, Specifications for Altitude Data, was expanded and upgraded significantly to the same level of detail as for the horizontal values. (7) A table delineating the coverage of Universal Transverse Mercator zones and the longitudes of the Central Meridians was added and the other tables renumbered. (8) The total length of the representation of point location data at maximum precision was standardized.

Study of journal bearing dynamics using 3-dimensional motion picture graphics

NASA Technical Reports Server (NTRS)

Brewe, D. E.; Sosoka, D. J.

1985-01-01

Computer generated motion pictures of three dimensional graphics are being used to analyze journal bearings under dynamically loaded conditions. The motion pictures simultaneously present the motion of the journal and the pressures predicted within the fluid film of the bearing as they evolve in time. The correct prediction of these fluid film pressures can be complicated by the development of cavitation within the fluid. The numerical model that is used predicts the formation of the cavitation bubble and its growth, downstream movement, and subsequent collapse. A complete physical picture is created in the motion picture as the journal traverses through the entire dynamic cycle.

Pharmaceutical structure montages as catalysts for design and discovery.

PubMed

Njarðarson, Jon T

2012-05-01

Majority of pharmaceuticals are small molecule organic compounds. Their structures are most effectively described and communicated using the graphical language of organic chemistry. A few years ago we decided to harness this powerful language to create new educational tools that could serve well for data mining and as catalysts for discovery. The results were the Top 200 drug posters, which we have posted online for everyone to enjoy and update yearly. This article details the origin and motivation for our design and highlights the value of this graphical format by presenting and analyzing a new pharmaceutical structure montage (poster) focused on US FDA approved drugs in 2011.

Non-Abelian states of matter.

PubMed

Stern, Ady

2010-03-11

Quantum mechanics classifies all elementary particles as either fermions or bosons, and this classification is crucial to the understanding of a variety of physical systems, such as lasers, metals and superconductors. In certain two-dimensional systems, interactions between electrons or atoms lead to the formation of quasiparticles that break the fermion-boson dichotomy. A particularly interesting alternative is offered by 'non-Abelian' states of matter, in which the presence of quasiparticles makes the ground state degenerate, and interchanges of identical quasiparticles shift the system between different ground states. Present experimental studies attempt to identify non-Abelian states in systems that manifest the fractional quantum Hall effect. If such states can be identified, they may become useful for quantum computation.

Documentation of model input and output values for simulation of pumping effects in Paradise Valley, a basin tributary to the Humboldt River, Humboldt County, Nevada

USGS Publications Warehouse

Carey, A.E.; Prudic, David E.

1996-01-01

Documentation is provided of model input and sample output used in a previous report for analysis of ground-water flow and simulated pumping scenarios in Paradise Valley, Humboldt County, Nevada.Documentation includes files containing input values and listings of sample output. The files, in American International Standard Code for Information Interchange (ASCII) or binary format, are compressed and put on a 3-1/2-inch diskette. The decompressed files require approximately 8.4 megabytes of disk space on an International Business Machine (IBM)- compatible microcomputer using the MicroSoft Disk Operating System (MS-DOS) operating system version 5.0 or greater.

WGISS-45 International Directory Network (IDN) Report

NASA Technical Reports Server (NTRS)

Morahan, Michael

2018-01-01

The objective of this presentation is to provide IDN (International Directory Network) updates on features and activities to the Committee on Earth Observation Satellites (CEOS) Working Group on Information Systems and Services (WGISS) and provider community. The following topics will be will be discussed during the presentation: Transition of Providers DIF-9 (Directory Interchange Format-9) to DIF-10 Metadata Records in the Common Metadata Repository (CMR); GCMD (Global Change Master Directory) Keyword Update; DIF-10 and UMM-C (Unified Metadata Model-Collections) Schema Changes; Metadata Validation of Provider Metadata; docBUILDER for Submitting IDN Metadata to the CMR (i.e. Registration); and Mapping WGClimate Essential Climate Variable (ECV) Inventory to IDN Records.

2012 Renewable Energy Data Book (Book)

DOE Office of Scientific and Technical Information (OSTI.GOV)

Gelman, R.

2013-10-01

This Renewable Energy Data Book for 2012 provides facts and figures in a graphical format on energy in general, renewable electricity in the United States, global renewable energy development, wind power, solar power, geothermal power, biopower, hydropower, advanced water power, hydrogen, renewable fuels, and clean energy investment.

IVisTMSA: Interactive Visual Tools for Multiple Sequence Alignments.

PubMed

Pervez, Muhammad Tariq; Babar, Masroor Ellahi; Nadeem, Asif; Aslam, Naeem; Naveed, Nasir; Ahmad, Sarfraz; Muhammad, Shah; Qadri, Salman; Shahid, Muhammad; Hussain, Tanveer; Javed, Maryam

2015-01-01

IVisTMSA is a software package of seven graphical tools for multiple sequence alignments. MSApad is an editing and analysis tool. It can load 409% more data than Jalview, STRAP, CINEMA, and Base-by-Base. MSA comparator allows the user to visualize consistent and inconsistent regions of reference and test alignments of more than 21-MB size in less than 12 seconds. MSA comparator is 5,200% efficient and more than 40% efficient as compared to BALiBASE c program and FastSP, respectively. MSA reconstruction tool provides graphical user interfaces for four popular aligners and allows the user to load several sequence files at a time. FASTA generator converts seven formats of alignments of unlimited size into FASTA format in a few seconds. MSA ID calculator calculates identity matrix of more than 11,000 sequences with a sequence length of 2,696 base pairs in less than 100 seconds. Tree and Distance Matrix calculation tools generate phylogenetic tree and distance matrix, respectively, using neighbor joining% identity and BLOSUM 62 matrix.