Controls on accretion of flysch and mélange belts at convergent margins: Evidence from the Chugach Bay thrust and Iceworm mélange, Chugach accretionary wedge, Alaska

NASA Astrophysics Data System (ADS)

Kusky, Timothy M.; Bradley, Dwight C.; Haeussler, Peter J.; Karl, Sue

1997-12-01

Controls on accretion of flysch and mélange terranes at convergent margins are poorly understood. Southern Alaska's Chugach terrane forms the outboard accretionary margin of the Wrangellia composite terrane, and consists of two major lithotectonic units, including Triassic-Cretaceous mélange of the McHugh Complex and Late Cretaceous flysch of the Valdez Group. The contact between the McHugh Complex and the Valdez Group on the Kenai Peninsula is a tectonic boundary between chaotically deformed melange of argillite, chert, greenstone, and graywacke of the McHugh Complex and a less chaotically deformed mélange of argillite and graywacke of the Valdez Group. We assign the latter to a new, informal unit of formational rank, the Iceworm mélange, and interpret it as a contractional fault zone (Chugach Bay thrust) along which the Valdez Group was emplaced beneath the McHugh Complex. The McHugh Complex had already been deformed and metamorphosed to prehnite-pumpellyite facies prior to formation of the Iceworm mélange. The Chugach Bay thrust formed between 75 and 55 Ma, as shown by Campanian-Maastrichtian depositional ages of the Valdez Group, and fault-related fabrics in the Iceworm mélange that are cut by Paleocene dikes. Motion along the Chugach Bay thrust thus followed Middle to Late Cretaceous collision (circa 90-100 Ma) of the Wrangellia composite terrane with North America. Collision related uplift and erosion of mountains in British Columbia formed a submarine fan on the Farallon plate, and we suggest that attempted subduction of this fan dramatically changed the subduction/accretion style within the Chugach accretionary wedge. We propose a model in which subduction of thinly sedimented plates concentrates shear strains in a narrow zone, generating mélanges like the McHugh in accretionary complexes. Subduction of thickly sedimented plates allows wider distribution of shear strains to accommodate plate convergence, generating a more coherent accretionary style including the fold-thrust structures that dominate the outcrop pattern in the Valdez belt. Rapid underplating and frontal accretion of the Valdez Group caused a critical taper adjustment of the accretionary wedge, including exhumation of the metamorphosed McHugh Complex, and its emplacement over the Valdez Group. The Iceworm mélange formed in a zone of focused fluid flow at the boundary between the McHugh Complex and Valdez Group during this critical taper adjustment of the wedge to these changing boundary conditions.

Geochemistry of approximately 1.9 Ga sedimentary rocks from northeastern Labrador, Canada

NASA Technical Reports Server (NTRS)

Hayashi, K. I.; Fujisawa, H.; Holland, H. D.; Ohmoto, H.

1997-01-01

Fifty-eight rock chips from fifteen samples of sedimentary rocks from the Ramah Group (approximately 1.9 Ga) in northeastern Labrador, Canada, were analyzed for major and minor elements, including C and S, to elucidate weathering processes on the Earth's surface about 1.9 Ga ago. The samples come from the Rowsell Harbour, Reddick Bight, and Nullataktok Formations. Two rock series, graywackes-gray shales of the Rowsell Harbour, Reddick Bight and Nullataktok Formations, and black shales of the Nullataktok Formation, are distinguishable on the basis of lithology, mineralogy, and major and trace element chemistry. The black shales show lower concentrations than the graywackes-gray shales in TiO2 (0.3-0.7 wt% vs. 0.7-1.8 wt%), Al2O3 (9.5-20.1 wt% vs. 13.0-25.0 wt%), and sigma Fe (<1 wt% vs. 3.8-13.9 wt% as FeO). Contents of Zr, Th, U, Nb, Ce, Y, Rb, Y, Co, and Ni are also lower in the black shales. The source rocks for the Ramah Group sediments were probably Archean gneisses with compositions similar to those in Labrador and western Greenland. The major element chemistry of source rocks for the Ramah Group sedimentary rocks was estimated from the Al2O3/TiO2 ratios of the sedimentary rocks and the relationship between the major element contents (e.g., SiO2 wt%) and Al2O3/TiO2 ratios of the Archean gneisses. This approach is justified, because the Al/Ti ratios of shales generally retain their source rock values; however, the Zr/Al, Zr/Ti, and Cr/Ni ratios fractionate during the transport of sediments. The measured SiO2 contents of shales in the Ramah Group are generally higher than the estimated SiO2 contents of source rocks by approximately 5 wt%. This correction may also have to be applied when estimating average crustal compositions from shales. Two provenances were recognized for the Ramah Group sediments. Provenance I was comprised mostly of rocks of bimodal compositions, one with SiO2 contents approximately 45 wt% and the other approximately 65 wt%, and was the source for most sedimentary rocks of the Ramah Group, except for black shales of the Nullataktok Formation. The black shales were apparently derived from Provenance II that was comprised mostly of felsic rocks with SiO2 contents approximately 65 wt%. Comparing the compositions of the Ramah Group sedimentary rocks and their source rocks, we have recognized that several major elements, especially Ca and Mg, were lost almost entirely from the source rocks during weathering and sedimentation. Sodium and potassium were also leached almost entirely during the weathering of the source rocks. However, significant amounts of Na were added to the black shales and K to all the rock types during diagenesis and/or regional metamorphism. The intensity of weathering of source rocks for the Ramah Group sediments was much higher than that of typical Phanerozoic sediments, possibly because of a higher PCO2 in the Proterozoic atmosphere. Compared to the source rock values, the Fe3+/Ti ratios of many of the graywackes and gray shales of the Ramah Group are higher, the Fe2+/Ti ratios are lower, and the sigma Fe/Ti ratios are the same. Such characteristics of the Fe geochemistry indicate that these sedimentary rocks are comprised of soils formed by weathering of source rocks under an oxygen-rich atmosphere. The atmosphere about 1.9 Ga was, therefore, oxygen rich. Typical black shales of Phanerozoic age exhibit positive correlations between the organic C contents and the concentrations of S, U, and Mo, because these elements are enriched in oxygenated seawater and are removed from seawater by organic matter in sediments. However, such correlations are not found in the Ramah Group sediments. Black shales of the Ramah Group contain 1.7-2.8 wt% organic C, but are extremely depleted in sigma Fe (<1 wt% as FeO), S (<0.3 wt%), U (approximately l ppm), Mo (<5 ppm), Ni (<2 ppm), and Co (approximately 0 ppm). This lack of correlation, however, does not imply that the approximately 1.9 Ga atmosphere-ocean system was anoxic. Depletion of these elements from the Ramah Group sediments may have occurred during diagenesis.

Geologic Evolution of North America: Geologic features suggest that the continent has grown and differentiated through geologic time.

PubMed

Engel, A E

1963-04-12

The oldest decipherable rock complexes within continents (more than 2.5 billion years old) are largely basaltic volcanics and graywacke. Recent and modern analogs are the island arcs formed along and adjacent to the unstable interface of continental and oceanic crusts. The major interfacial reactions (orogenies) incorporate pre-existing sial, oceanic crust, and mantle into crust of a more continental type. Incipient stages of continental evolution, more than 3 billion years ago, remain obscure. They may involve either a cataclysmic granite-forming event or a succession of volcanic-sedimentary and granite-forming cycles. Intermediate and recent stages of continental evolution, as indicated by data for North America, involve accretion of numerous crustal interfaces with fragments of adjacent continental crust and their partial melting, reinjection, elevation, unroofing, and stabilization. Areas of relict provinces defined by ages of granites suggest that continental growth is approximately linear. But the advanced differentiation found in many provinces and the known overlaps permit wide deviation from linearity in the direction of a more explosive early or intermediate growth.

Sulfur Isotropic Studies of Archean Slate and Graywacke from Northern Minnesota: Evidence for the Existence of Sulfate Reducing Bacteria

NASA Technical Reports Server (NTRS)

Ripley, E. M.; Nicol, D. L.

1979-01-01

Sulfur isotopic studies of pyrite from metasediments in the 2.6 b.y. old Deer Lake greenstone sequence, Minnesota, were conducted in order to evaluate the possible importance of sulfate reducing bacteria in sulfide formation. Pyrite occurs as ovules up to 2 cm in diameter within graphitic slates, and as fine disseminations in metagraywacke units. SEM studies indicate the pyrite is framboidal in morphology. Delta notation values of pyrite from the Deer Lake sediments range from -2.3 to 11.1 0/00, with a peak at approximately +2 o/oo. Isotopic data is consistent with either high temperature inorganic reduction of circulating seawater sulfate, or low temperature bacterial reduction. However, the lack of sulfide bands or massive occurrences in the sediments, the restriction of pyrite mineralization to the sediments, and the absence of evidence for hot spring activity suggest that a diagenetic origin of pyrite is more feasible. Sulfide in such an environment would be produced principally by the action of sulfate reducing bacteria.

Laboratory investigations into fracture propagation characteristics of rock material

NASA Astrophysics Data System (ADS)

Prasad, B. N. V. Siva; Murthy, V. M. S. R.

2018-04-01

After Industrial Revolution, demand of materials for building up structures have increased enormously. Unfortunately, failures of such structures resulted in loss of life and property. Rock is anisotropic and discontinuous in nature with inherent flaws or so-called discontinuities in it. Rock is apparently used for construction in mining, civil, tunnelling, hydropower, geothermal and nuclear sectors [1]. Therefore, the strength of the structure built up considering rockmass as the construction material needs proper technical evaluation during designing stage itself to prevent and predict the scenarios of catastrophic failures due to these inherent fractures [2]. In this study, samples collected from nine different drilling sites have been investigated in laboratory for understanding the fracture propagation characteristics in rock. Rock material properties, ultrasonic velocities through pulse transmission technique and Mode I Fracture Toughness Testing of different variants of Dolomites and Graywackes are determined in laboratory and the resistance of the rock material to catastrophic crack extension or propagation has been determined. Based on the Fracture Toughness values and the rock properties, critical Energy Release Rates have been estimated. However further studies in this direction is to be carried out to understand the fracture propagation characteristics in three-dimensional space.

Structure of Franciscan complex in the Stanley Mountain window, Southern Coast ranges, California

DOE Office of Scientific and Technical Information (OSTI.GOV)

Korsch, R.J.

1982-11-01

Three sets of deformational events are recognized in the Franciscan Complex of the Stanley Mt. area, S. Coast ranges, California. First, in pre-melange time, shortening of the relatively cohesive sequence of interbedded graywacke and mudstone formed isoclinal folds and an axial-plane slaty cleavage. Second, fragmentation of the once cohesive sequence, probably over a considerable period of time, produced the configuration now considered a melange. Third, after the melange developed, the Franciscan Complex was deformed along with the surrounding upper Mesozoic Great Valley sequence into the Stanley Mt. antiform. In the cohesive Upper Cretaceous Carrie Creek Formation, macroscopic and mesoscopic foldsmore » have 2 predominant orientations. The less cohesive Franciscan Complex attempted to fold, as shown by the distribution of shear foliations on stereographic projections, but lack of lithologic continuity and slip along previously formed shear fractures prevents the recognition of macroscopic folds. Hence, in the Franciscan Complex of the Stanley Mt. window, several lines of evidence show that the melange structure is tectonic in origin, not just a tectonic imprint superimposed upon already chaotic rocks of sedimentary origin (olistostromes). 43 references.« less

U-Pb zircon age data for selected sedimentary, metasedimentary, and igneous rocks from northern and central Alaska

USGS Publications Warehouse

Moore, Thomas E.

2014-01-01

Data from two studies are included in this report. The first study, by Dumoulin and others (2013), reported the detrital zircon U-Pb age analysis of a single sample from the Upper Mississippian Ikalukrok unit of the Kuna Formation (table 1). The second study is that of Moore and others (in press), which focuses on the Upper Jurassic and Lower Cretaceous part of the Brookian sequence in the western Brooks Range (17 samples; table 2). For the latter study, samples were analyzed from the following units (1) the Upper Jurassic unit, Jw, of Curtis and others (1984), (2) the Lower Cretaceous Igrarok Hills unit of Moore and others (2002), (3) the Upper Jurassic and Lower Cretaceous Okpikruak Formation, (4) the Lower Cretaceous lower Brookian shale of Mull (1995), (5) the Lower Cretaceous Mount Kelly Graywacke Tongue of the Fortress Mountain Formation, (6) and the upper Lower Cretaceous Nanushuk Formation as redefined by Mull and others (2003). The results for each study are reported in separate Excel files, with individual samples in each study being shown as separate sheets within the files. The analyses of individual zircons are listed separately on the sheet according to the filtering schemes of the study and by the type of mass spectrometer used.

Field-trip guide to the geology of the Lexington Reservoir and Loma Prieta areas in the Santa Cruz Mountains, Santa Clara and Santa Cruz counties, California

USGS Publications Warehouse

Stoffer, Philip W.; Messina, Paula

2002-01-01

This guide contains a road log and five stop descriptions for a field trip in the southern Santa Cruz Mountains. The trip officially begins at the boat dock parking area on Alma Bridge Road near the dam of Lexington Reservoir. Stop 1 involves a walk up the Limekiln Trail to examine a large landslide in serpentinite that frequently takes out the trail. Stop 2 is at Miller Point picnic area along the shore of the reservoir where exposures of massive, fractured graywacke sandstone are capped with terrace gravel deposits. Stop 3 is along Highland Way in the Santa Cruz Mountains where large landslides have occasionally force the closure of the road. Stop 4A-C are several closely spaced outcrop areas along Loma Prieta Avenue and Summit-Mt. Madonna Road in the Loma Prieta summit area. A walk to scenic vista points provide opportunity to discuss the evolution of regional landscape along the crest of the Sierra Azul. In addition, a variety of rock types are exposed in the Stop 4 area along a series of road cuts, including Cretaceous age conglomerate, turbidites (consisting of interbedded sandstone and shale), and fossiliferous mudstone. Stop 5 involves returning to the boat dock parking area to examine geology and the placement of the Lexington Dam in the Los Gatos Creek canyon.

Provenance and tectonic setting of the supra-crustal succession of the Qinling Complex: Implications for the tectonic affinity of the North Qinling Belt, Central China

NASA Astrophysics Data System (ADS)

Shi, Yu; Huang, Qianwen; Liu, Xijun; Krapež, Bryan; Yu, Jinhai; Bai, Zhian

2018-06-01

The Qinling Complex lies in the Qinling orogenic belt of Central China and holds the key to understanding the evolution of this feature. The Qinling Complex comprises a basement complex composed of amphibolite and ecologite, overlain by a supra-crustal succession that has been metamorphosed to the upper greenschist facies at approximately 516-509 Ma. The protoliths of the meta-sedimentary rocks are graywackes, which are divided into lower, middle and upper units. Detrital zircons from nine samples of the supra-crustal succession have ages ranging from 1182 to 1158 Ma for the lower unit, 957 to 955 Ma for the middle unit and 917 to 840 Ma for the upper unit. The lower unit is intruded by a ca. 960 Ma pluton. The bulk compositions of these meta-sedimentary rocks and their detrital zircon ages clearly indicate derivation from Meso- and Neo-proterozoic granites. Thus, we suggest that the sedimentary succession was derived from an arc-related tectonic setting and that none of the detritus was sourced from the southern margin of the North China Block or from the northern and western margins of the South China Block. We conclude that the North Qinling Belt was an independent micro-continental block during the Meso- to Neo-proterozoic.

Overview of the geologic effects of the November 14, 2016, Mw 7.8 Kaikoura, New Zealand, earthquake

USGS Publications Warehouse

Jibson, Randall W.; Allstadt, Kate E.; Rengers, Francis K.; Godt, Jonathan W.

2018-03-30

The November 14, 2016, Kaikoura, New Zealand, earthquake (moment magnitude [Mw] 7.8) triggered more than 10,000 landslides over an area of about 12,000 square kilometers in the northeastern part of the South Island of New Zealand. In collaboration with GNS Science (the Institute of Geological and Nuclear Science Limited), we conducted ground and helicopter reconnaissance of the affected areas and assisted in rapid hazard evaluation. The majority of the triggered landslides were shallow- to moderate-depth (1–10 meters), highly disrupted falls and slides in rock and debris from Lower Cretaceous graywacke sandstone in the Seaward Kaikoura Range. Deeper, more coherent landslides in weak Upper Cretaceous to Neogene sedimentary rock also were numerous in the gentler topography south and inland (west) of the Seaward Kaikoura Range. The principal ground-failure hazards from the earthquake were the hundreds of valley-blocking landslides, many of which impounded lakes and ponds that posed potential downstream flooding hazards. Both large and small landslides also blocked road and rail corridors in many locations, including the main north-south highway (State Highway 1), which was still closed in October 2017. As part of our investigation, we compared post-earthquake field observations to the output of models used to estimate near-real-time landslide probabilities following earthquakes. The models generally over-predicted landslide occurrence and thus need further refinement.

Kinematic analysis of melange fabrics: Examples and applications from the McHugh Complex, Kenai Peninsula, Alaska

USGS Publications Warehouse

Kusky, T.M.; Bradley, D.C.

1999-01-01

Permian to Cretaceous melange of the McHugh Complex on the Kenai Peninsula, south-central Alaska includes blocks and belts of graywacke, argillite, limestone, chert, basalt, gabbro, and ultramafic rocks, intruded by a variety of igneous rocks. An oceanic plate stratigraphy is repeated hundreds of times across the map area, but most structures at the outcrop scale extend lithological layering. Strong rheological units occur as blocks within a matrix that flowed around the competent blocks during deformation, forming broken formation and melange. Deformation was noncoaxial, and disruption of primary layering was a consequence of general strain driven by plate convergence in a relatively narrow zone between the overriding accretionary wedge and the downgoing, generally thinly sedimented oceanic plate. Soft-sediment deformation processes do not appear to have played a major role in the formation of the melange. A model for deformation at the toe of the wedge is proposed in which layers oriented at low angles to ??1 are contracted in both the brittle and ductile regimes, layers at 30-45??to ??1 are extended in the brittle regime and contracted in the ductile regime, and layers at angles greater than 45??to ??1 are extended in both the brittle and ductile regimes. Imbrication in thrust duplexes occurs at deeper levels within the wedge. Many structures within melange of the McHugh Complex are asymmetric and record kinematic information consistent with the inferred structural setting in an accretionary wedge. A displacement field for the McHugh Complex on the lower Kenai Peninsula includes three belts: an inboard belt of Late Triassic rocks records west-to-east-directed slip of hanging walls, a central belt of predominantly Early Jurassic rocks records north-south directed displacements, and Early Cretaceous rocks in an outboard belt preserve southwest-northeast directed slip vectors. Although precise ages of accretion are unknown, slip directions are compatible with inferred plate motions during the general time frame of accretion of the McHugh Complex. The slip vectors are interpreted to preserve the convergence directions between the overriding and underriding plates, which became more oblique with time. They are not considered indicative of strain partitioning into belts of orogen-parallel and orogen-perpendicular displacements, because the kinematic data are derived from the earliest preserved structures, whereas fabrics related to strain partitioning would be expected to be superimposed on earlier accretion-related fabrics.Permian to Cretaceous melange of the McHugh Complex on the Kenai Peninsula, south-central Alaska includes blocks and belts of graywacke, argillite, limestone, chert, basalt, gabbro, and ultramafic rocks, intruded by a variety of igneous rocks. An oceanic plate stratigraphy is repeated hundreds of times across the map area, but most structures at the outcrop scale extend lithological layering. Strong rheological units occur as blocks within a matrix that flowed around the competent blocks during deformation, forming broken formation and melange. Deformation was noncoaxial, and disruption of primary layering was a consequence of general strain driven by plate convergence in a relatively narrow zone between the overriding accretionary wedge and the downgoing, generally thinly sedimented oceanic plate. Soft-sediment deformation processes do not appear to have played a major role in the formation of the melange. A model for deformation at the toe of the wedge is proposed in which layers oriented at low angles to ??1 are contracted in both the brittle and ductile regimes, layers at 30-45?? to ??1 are extended in the brittle regime and contracted in the ductile regime, and layers at angles greater than 45?? to ??1 are extended in both the brittle and ductile regimes. Imbrication in thrust duplexes occurs at deeper levels within the wedge. Many structures within melange of the McHugh Complex are asymmetric and record

Reconnaissance geology of the Wadi Wassat quadrangle, Kingdom of Saudi Arabia

USGS Publications Warehouse

Overstreet, William C.; Rossman, D.L.

1970-01-01

The Wadi Wassat quadrangle covers an area of 2926 sq km in the southwestern part of the Kingdom of Saudi Arabia. The west half of the quadrangle is underlain by crystalline rocks of the Arabian Shield, but in the eastern half of the quadrangle the Precambrian rocks are covered by Permian or older sandstone which is succeeded farther east by aeolian sands of Ar Rub' al Khali. The Shield consists of a sequence of unmetamorphosed to metamorphosed interlayered volcanic and sedimentary rocks intruded by igneous rocks ranging in composition from gabbro to syenite and in age from Precambrian to Cambrian(?). The volcanic rocks range in composition from andesite to rhyolite and in texture from agglomerate to thick, massive flows and lithic tuff. They are interlayered with conglomerate, fine-grained graywacke sandstone, calcareous graywacke, siltstone, tuffaceous laminated shale, pyritiferous sediment, carbonaceous shale, limestone, and dolomite. Most clastic debris is derived from andesite. In places the rocks are polymetamorphosed; elsewhere they are unmetamorphosed. The rocks on which this volcano-sedimentary eugeosynclinal sequence was deposited are not exposed in the area of the quadrangle. Reglonal dynamothermal metamorphism was .the dominant process affecting the volcanic-sedimentary rocks in the western part of the quadrangle. In the eastern part of the Precambrian area the chief metamorphic effect results from contact action along the walls of intrusive plutons. The oldest igneous rock to intrude the volcanic-sedimentary sequence, after the dikes and sills of the sequence itself, is granite gneiss and gneissic granodiorite. The gneiss is sparsely present in the quadrangle, but northwest of the quadrangle it forms an immense batholith which is one of the major geologic features of southwestern Arabia. However, the most common intrusive rocks of the quadrangle are a magnetic differentiation sequence that ranges in composition from gabbro and diorite to granite, rhyolite, and syenite. The siliceous members of the differentiation sequence commonly contain aluminous pyroxene or amphibole, and to the sequence the name peralkalic magma series has been given. Plutonic rocks of the series are widely intruded by hypabyssal rocks of the series. In most places, the older hypabyssal rocks tend to form interior dikes in the plutonic rocks, and the younger hypabyssal rocks commonly form the exterior dike swarms outside the plutonic rocks of the magma series. Many exterior dike swarms are concentrated in roof pendants of volcano-sedimentary rocks over the plutonic members of the magma series. Isotopic ages of rocks in the peralkalic magma series range from 598 +/-24 m.y. to 509 +/-15 m.y. by K/Ar and Rb/Sr methods. A profound angular unconformity exists between the Precambrian and Cambrian(?) crystalline rocks and the Permian or older sandstone which laps onto the Shield from the east and south. This sandstone, is reddish-brown, yellow, tan, and white called Wajid Sandstone, crossbedded sandstone with ferruginous cement and concretions in some layers. Locally, the rocks underlying the Wajid Sandstone are deeply weathered. Poorly sorted alluvial sand and gravel mantle the wadi floors. In the northeastern and southwestern parts of the quadrangle well-sorted aeolian sand is common. The volcanic and sedimentary rocks of the quadrangle are part of the east limb of an immense synclinorium(?) that closes south-westward around a batholitic core of gneissic granite and granodiorite. These layered rocks were isoclinally folded along northerly and north-northeasterly trending axes prior to the intrusion of the peralkalic magma series. During intrusion, the layered rocks were again folded as they were pushed aside, and major old regional northerly faults were reactivated with persistent left-lateral displacement. Reconnaissance geochemical sampling disclosed several notable groupings of threshold and anomalous elements with spe

Geologic Setting of the Hamme Tungsten District, North Carolina and Virginia

USGS Publications Warehouse

Parker, John Mason

1963-01-01

The Hamme tungsten district is in the eastern part of the Piedmont province, mainly in Vance County, North Carolina, but it extends a few miles into Virginia. The district is underlain by a central lenticular pluton of albite granodiorite that trends north-northeastward and is flanked on both sides by metamorphic rocks of low and medium grade that dip steeply westward. The relative ages of the metamorphic rocks are uncertain. The oldest rocks are likely to be the biotite gneisses in the eastern part of the district; successively younger units expose westward across the district are sericite-chlorite phyllites, greenstone, metafelsites, and metabasalts. The biotite gneisses and minor intercalated hornblende gneiss, which have a total thickness of many thousand feet, were derived from sediments. Some of the gneiss grades into phyllites and as probably formed by metasomatic alteration of the phyllites. Sericite-chlorite phyllite, epidote-quartz meta siltstone, quartzite, and conglomeratic phyllite occur principally in a wide belt on the west side of the central albite granodiorite. This unit is some 10,000 feet thick and originally consisted mainly of sediments of the graywacke suite. Greenstone totaling about 500 feet in thickness lies west of the phyllite and was derived from maflc lava flows and andesitic tuff. Metamorphosed massive aphanitic and porphyritic flows and dikes that range in composition from dacite to rhyolite, and phyllitic metatuffs and tuffaceous breccia are exposed west of the greenstone. These total at least 3,000 feet in thickness. Massive metabasalt that resembles greenstone but is less altered is common in the area between the Hamme district and the Virgilina district to the west. The thickness of the metabasalt is about 600 to 6,000 feet. The metamorphic rocks of the Hamme and Virgilina districts are parts of the Carolina slate belt, but map units cannot be directly correlated. Rocks in the Hamme district are thought by the writer to have been derived mainly from graywackes and volcanic flows, and subordinately from pyroclastic materials, whereas the rocks of the Virgilina district were interpreted by earlier workers as being mainly volcanic with much pyroclastic material but little sediment. Igneous, and perhaps pseudo igneous, rocks in the district include hornblende gabbro, albite granodiorite, aplite, and pegmatite--all of which are probably middle Paleozoic in age--and diabase and hypersthene tonalite of Late Triassic age. The gabbro forms three lenticular to subcircular bodies up to 2% miles in width in the western part of the area. Albite granodiorite forms a pluton with a maximum width of 7 miles which occupies the center of the area. At its northeastern end the pluton narrows abruptly to a point. Phyllite forms the wall rocks on all sides of the albite granodiorite. The contact is gradational and conformable in most places, but on the northwest side it cuts across wall structure for about 3 miles. Near its western edge the albite granodiorite includes a northeast-trending zone of schistose wall rock in and near which are localized the tungsten deposits. The origin of the albite granodiorite is uncertain, but it may have formed by the metasomatic replacement of the wallrocks, during which albite porphyroblasts developed first and were followed by microcline and quartz. Diabase and hypersthene tonalite occur as dikes and sills along four northward-trending belts. The dikes are a few feet to more than 300 feet thick, and several extend along strike for more than 10 miles. The Hamme district Is in the eastern part of the Carolina slate belt, and the Virg1l1na district lies along the western side of the belt. Rocks in the Hamme district dip mostly westward and in the Vifg1lina district dip mainly eastward into a syncline. This syncline, here named the Spewmarrow syncline, may be a structure of regional significance. Tungsten in the Hamme district occurs mainly

The Cannery Formation--Devonian to Early Permian arc-marginal deposits within the Alexander Terrane, Southeastern Alaska

USGS Publications Warehouse

Karl, Susan M.; Layer, Paul W.; Harris, Anita G.; Haeussler, Peter J.; Murchey, Benita L.

2011-01-01

The Cannery Formation consists of green, red, and gray ribbon chert, siliceous siltstone, graywacke-chert turbidites, and volcaniclastic sandstone. Because it contains early Permian fossils at and near its type area in Cannery Cove, on Admiralty Island in southeastern Alaska, the formation was originally defined as a Permian stratigraphic unit. Similar rocks exposed in Windfall Harbor on Admiralty Island contain early Permian bryozoans and brachiopods, as well as Mississippian through Permian radiolarians. Black and green bedded chert with subordinate lenses of limestone, basalt, and graywacke near Kake on Kupreanof Island was initially correlated with the Cannery Formation on the basis of similar lithology but was later determined to contain Late Devonian conodonts. Permian conglomerate in Keku Strait contains chert cobbles inferred to be derived from the Cannery Formation that yielded Devonian and Mississippian radiolarians. On the basis of fossils recovered from a limestone lens near Kake and chert cobbles in the Keku Strait area, the age of the Cannery Formation was revised to Devonian and Mississippian, but this revision excludes rocks in the type locality, in addition to excluding bedded chert on Kupreanof Island east of Kake that contains radiolarians of Late Pennsylvanian and early Permian age. The black chert near Kake that yielded Late Devonian conodonts is nearly contemporaneous with black chert interbedded with limestone that also contains Late Devonian conodonts in the Saginaw Bay Formation on Kuiu Island. The chert cobbles in the conglomerate in Keku Strait may be derived from either the Cannery Formation or the Saginaw Bay Formation and need not restrict the age of the Cannery Formation, regardless of their source. The minimum age of the Cannery Formation on both Admiralty Island and Kupreanof Island is constrained by the stratigraphically overlying fossiliferous Pybus Formation, of late early and early late Permian age. Because bedded radiolarian cherts on both Admiralty and Kupreanof Islands contain radiolarians as young as Permian, the age of the Cannery Formation is herein extended to Late Devonian through early Permian, to include the early Permian rocks exposed in its type locality. The Cannery Formation is folded and faulted, and its stratigraphic thickness is unknown but inferred to be several hundred meters. The Cannery Formation represents an extended period of marine deposition in moderately deep water, with slow rates of deposition and limited clastic input during Devonian through Pennsylvanian time and increasing argillaceous, volcaniclastic, and bioclastic input during the Permian. The Cannery Formation comprises upper Paleozoic rocks in the Alexander terrane of southeastern Alaska. In the pre-Permian upper Paleozoic, the tectonic setting of the Alexander terrane consisted of two or more evolved oceanic arcs. The lower Permian section is represented by a distinctive suite of rocks in the Alexander terrane, which includes sedimentary and volcanic rocks containing early Permian fossils, metamorphosed rocks with early Permian cooling ages, and intrusive rocks with early Permian cooling ages, that form discrete northwest-trending belts. After restoration of 180 km of dextral displacement of the Chilkat-Chichagof block on the Chatham Strait Fault, these belts consist, from northeast to southwest, of (1) bedded chert, siliceous argillite, volcaniclastic turbidites, pillow basalt, and limestone of the Cannery Formation and the Porcupine Slate of Gilbert and others (1987); (2) greenschist-facies Paleozoic metasedimentary and metavolcanic rocks that have Permian cooling ages; (3) silty limestone and calcareous argillite interbedded with pillow basalt and volcaniclastic rocks of the Halleck Formation and the William Henry Bay area; and (4) intermediate-composition and syenitic plutons. These belts correspond to components of an accretionary complex, contemporary metamorphic rocks, forearc-basin deposits,

Reconnaissance engineering geology of Sitka and vicinity, Alaska, with emphasis on evaluation of earthquake and other geologic hazards

USGS Publications Warehouse

Yehle, Lynn A.

1974-01-01

A program to study the engineering geology of most of the larger Alaska coastal communities and to evaluate their earthquake and other geologic hazards was started following the 1964 Alaska earthquake; this report about Sitka and vicinity is a product of that program. Field-study methods were of a reconnaissance nature, and thus the interpretations in the report are subject to revision as further information becomes available. This report can provide broad geologic guidelines for planners and engineers during preparation of land-use plans. The use of this information should lead to minimizing future loss of life and property due to geologic hazards, especially during very large earthquakes. Landscape of Sitka and surrounding area is characterized by numerous islands and a narrow strip of gently rolling ground adjacent to rugged mountains; steep valleys and some fiords cut sharply into the mountains. A few valley floors are wide and flat and grade into moderate-sized deltas. Glaciers throughout southeastern Alaska and elsewhere became vastly enlarged during the Pleistocene Epoch. The Sitka area presumably was covered by ice several times; glaciers deeply eroded some valleys and removed fractured bedrock along some faults. The last major deglaciation occurred sometime before 10,000 years ago. Crustal rebound believed to be related to glacial melting caused land emergence at Sitka of at least 35 feet (10.7 m) relative to present sea level. Bedrock at Sitka and vicinity is composed mostly of bedded, hard, dense graywacke and some argillite. Beds strike predominantly northwest and are vertical or steeply dipping. Locally, bedded rocks are cut by dikes of fine-grained igneous rock. Host bedrock is of Jurassic and Cretaceous age. Eight types of surficial deposits of Quaternary age were recognized. Below altitudes of 3S feet (10.7 m), the dominant deposits are those of modern and elevated shores and deltas; at higher altitudes, widespread muskeg overlies a mantle of volcanic ash which commonly overlies glacial drift. Alluvial deposits are minor. Man-emplaced embankment fill, chiefly sandy gravel, covers many muskeg and former offshore areas; quarried blocks of graywacke are placed to form breakwaters and to edge large areas of embankment fill and modified ground. The geologic structure of the area is known only in general outlines. Most bedded Mesozoic rocks probably are part of broad northwest-trending complexes of anticlines and synclines. Intrusion of large bodies of plutonic igneous rocks occurred in Tertiary and Cretaceous time. Extensive faulting is suggested by the numerous linear to gently curving patterns of some fiords, lakes, and valleys, and by a group of Holocene volcanoes and cinder cones. Two major northwest-striking fault zones are most prominent: (1) the apparently inactive Chichagof-Sitka fault, about 2.5 miles (4.0 km) northeast of Sitka, and {2) part of the active 800-mile- (1,200-km) long Fairweather-Queen Charlotte Islands fault system, lying about 30 miles (48 km) southwest of the city. Many earthquakes have been reported as felt at Sitka since 1832, when good records were first maintained; several shocks were very strong, but none of them caused severe damage. The closest major earthquake (magnitude about 7.3) causing some damage to the city occurred July 30, 1972, and had an epicenter about 30 miles (48 km) to the southwest. Movement along the Fairweather-Queen Charlotte Islands fault system apparently caused most of the earthquakes felt at Sitka. The probability of destructive earthquakes at Sitka is unknown. The tectonics of the region and the seismic record suggest that sometime in the future an earthquake of a magnitude of about 8 and related to the Fairweather-Queen Charlotte Islands fault system probably will occur in or near the area. Effects from some nearby major earthquakes could cause substantial damage at Sitka. Eight possible effects are as follows: 1. Sudden dis

Neoproterozoic-Early Paleozoic Peri-Pacific Accretionary Evolution of the Mongolian Collage System: Insights From Geochemical and U-Pb Zircon Data From the Ordovician Sedimentary Wedge in the Mongolian Altai

NASA Astrophysics Data System (ADS)

Jiang, Y. D.; Schulmann, K.; Kröner, A.; Sun, M.; Lexa, O.; Janoušek, V.; Buriánek, D.; Yuan, C.; Hanžl, P.

2017-11-01

Neoproterozoic to early Paleozoic accretionary processes of the Central Asian Orogenic Belt have been evaluated so far mainly using the geology of ophiolites and/or magmatic arcs. Thus, the knowledge of the nature and evolution of associated sedimentary prisms remains fragmentary. We carried out an integrated geological, geochemical, and zircon U-Pb geochronological study on a giant Ordovician metasedimentary succession of the Mongolian Altai Mountains. This succession is characterized by dominant terrigenous components mixed with volcanogenic material. It is chemically immature, compositionally analogous to graywacke, and marked by significant input of felsic to intermediate arc components, pointing to an active continental margin depositional setting. Detrital zircon U-Pb ages suggest a source dominated by products of early Paleozoic magmatism prevailing during the Cambrian-Ordovician and culminating at circa 500 Ma. We propose that the Ordovician succession forms an "Altai sedimentary wedge," the evolution of which can be linked to the geodynamics of the margins of the Mongolian Precambrian Zavhan-Baydrag blocks. This involved subduction reversal from southward subduction of a passive continental margin (Early Cambrian) to the development of the "Ikh-Mongol Magmatic Arc System" and the giant Altai sedimentary wedge above a north dipping subduction zone (Late Cambrian-Ordovician). Such a dynamic process resembles the tectonic evolution of the peri-Pacific accretionary Terra Australis Orogen. A new model reconciling the Baikalian metamorphic belt along the southern Siberian Craton with peri-Pacific Altai accretionary systems fringing the Mongolian microcontinents is proposed to explain the Cambro-Ordovician geodynamic evolution of the Mongolian collage system.

The western transverse ranges microplate as a native terrane

DOE Office of Scientific and Technical Information (OSTI.GOV)

Campbell, M.D.; Reed, W.E.

1994-04-01

Palocurrent measurements from the entire Cretaceous section of the western Transverse Ranges microplate (WTRM) yield a northerly flow direction. Point count data indicate a mixed provenance for both conglomerates and associated sandstones. The dominant provenance was mixed magmatic arc/recycled orogen and disected/transitional arc terranes. Petrographic, quantitative SEM and microprobe analysis also indicate the presence of diagnostic Franciscan mineralogy in these sediments, including glaucophane, riebeckite, lawsonite, and serpentine, suggesting derivation from a subduction complex. Olistoclasts of chert, jadeitic graywacke, serpentine and blueschist are found intermixed within the arc-derived sediments. Olistoclasts range in size from sub-millimeter to centimeter scale and olistoliths rangemore » up to 150 m. Well preserved internal bedding in some of the olistoliths suggest emplacement by landsliding indicating very short transport distance. This Franciscan material represents the oldest melange-derived material reported from this part of California and documents uplift and erosion of the subduction complex earlier than previously suggested. These data are consistent with deposition in a Cretaceous fore-arc basin located west or south of the San Diego area. The allochthonous WTRM of southern California can be reconstructed to an originally north-south oriented fore-arc basin. After deposition of the Sespe Formation (22 Ma [+-]) the microplate was slivered by strike-slip faults and rotated clockwise approximately 90[degrees], after which, the block again accreted against the continental margin. Our reconstruction suggest that depositional and structural trends for Eocene and Cretaceous sediments is likely to be different from that in the Miocene Monterey pay zones in the Santa Barbara channel region. If our reconstruction is correct, exploration strategy for Eocene and Cretaceous petroleum in the southern California Bight should take this tectonic model into account.« less

Tectonics of Precambrian basement along the Pacific margin of Antarctica and relation to western North America

DOE Office of Scientific and Technical Information (OSTI.GOV)

Goodge, J.W.; Hansen, V.L.; Walker, N.W.

1993-02-01

High-grade metamorphic rocks of the Precambrian Nimrod Group (NG) constitute one of few cratonal basement exposures in the Transantarctic Mountains. These rocks represent an outlier of the East Antarctic craton, evolved as part of Gondwana and pre-Gondwana (Rodinia) supercontinents. Despite pervasive, high-strain ductile deformation at T [>=] 650 C, they preserve petrologic and geochronologic evidence of an earlier history. Sm-Nd model ages from several NG lithologies, including that of a [approximately]1.7 Ga orthogneiss, range from about 2.7--2.9 Ga; these ages reflect both sedimentary and magmatic derivation from Archean crust. Individual detrital zircon U-Pb ages (about 1.7--2.6 Ga) from NG quartzitesmore » indicate clastic input from Archean to Paleoproterozoic source terrains. The Sm-Nd and U-Pb ages are reminiscent of both the Yavapai-Mazatzal (1.6--1.8 Ga) and Wyoming (> 2.5 Ga) provinces in western North America. U-Pb ages from syn-tectonic metaigneous and pelitic NG tectonites indicate that this basement complex was re-worked by the major ductile deformation in latest neoproterozoic to Early Cambrian time. Supracrustal assemblages that lie outboard of the Nimrod craton include Neoproterozoic graywacke, impure carbonate, and minor mafic volcanics (Beardmore Group), and Cambrian to Lower Ordovician carbonate and siliciclastic rocks (Byrd Group). Neoproterozoic ([approximately]750 Ma) rifting along the proto-Pacific margin of East Antarctica is reflected by deposition of Beardmore turbidites and coeval mafic magmatism. Latest Neoproterozoic to early Paleozoic orogenesis occurred along a left-oblique convergent plate margin of East Antarctica is reflected by deposition of Beardmore turbidites and coeval mafic magmatism.« less

Bedrock geologic map of the northern Alaska Peninsula area, southwestern Alaska

USGS Publications Warehouse

Wilson, Frederic H.; Blodgett, Robert B.; Blome, Charles D.; Mohadjer, Solmaz; Preller, Cindi C.; Klimasauskas, Edward P.; Gamble, Bruce M.; Coonrad, Warren L.

2017-03-03

The northern Alaska Peninsula is a region of transition from the classic magmatic arc geology of the Alaska Peninsula to a Proterozoic and early Paleozoic carbonate platform and then to the poorly understood, tectonically complex sedimentary basins of southwestern Alaska. Physiographically, the region ranges from the high glaciated mountains of the Alaska-Aleutian Range to the coastal lowlands of Cook Inlet on the east and Bristol Bay on the southwest. The lower Ahklun Mountains and finger lakes on the west side of the map area show strong effects from glaciation. Structurally, a number of major faults cut the map area. Most important of these are the Bruin Bay Fault that parallels the coast of Cook Inlet, the Lake Clark Fault that cuts diagonally northeast to southwest across the eastern part of the map area, and the presently active Holitna Fault to the northwest that cuts surficial deposits.Distinctive rock packages assigned to three provinces are overlain by younger sedimentary rocks and intruded by widely dispersed latest Cretaceous and (or) early Tertiary granitic rocks. Much of the east half of the map area lies in the Alaska-Aleutian Range province; the Jurassic to Tertiary Alaska-Aleutian Range batholith and derivative Jurassic sedimentary rocks form the core of this province, which is intruded and overlain by the Aleutian magmatic arc. The Lime Hills province, the carbonate platform, occurs in the north-central part of the map area. The Paleozoic and Mesozoic Ahklun Mountains province in the western part of the map area includes abundant chert, argillite, and graywacke and lesser limestone, basalt, and tectonic mélange. The Kuskokwim Group, an Upper Cretaceous turbidite sequence, is extensively exposed and bounds all three provinces in the west-central part of the map area.

Mapping the megathrust beneath the northern Gulf of Alaska using wide-angle seismic reflection/refraction profiles

DOE Office of Scientific and Technical Information (OSTI.GOV)

Brocher, T.M.; Fuis, G.S.; Fisher, M.A.

1993-04-01

In the northern Gulf of Alaska and Prince William Sound, wide-angle seismic reflection/refraction profiling, earthquake studies, and laboratory measurements of physical properties are used to determine the geometry of the Prince William and Yakutat terranes, and the subducting Pacific plate. In this complex region, the Yakutat terrane is underthrust beneath the Prince William terrane, and both terranes are interpreted to be underlain by the Pacific plate. Wide-angle seismic reflection/refraction profiles recorded along 5 seismic lines are used to unravel this terrane geometry. Modeled velocities in the upper crust of the Prince William terrane (to 18-km depth) agree closely with laboratorymore » velocity measurements of Orca Group phyllites and quartzofeldspathic graywackes (the chief components of the Prince William terrane) to hydrostatic pressures as high as 600 MPa (6 KBAR). An interpretation consistent with these data extends the Prince William terrane to at least 18-km depth. A landward dipping reflection at depths of 16--24 km is interpreted as the base of the Prince William terrane. This reflector corresponds to the top of the Wadati-Benioff zone seismicity and is interpreted as the megathrust. Beneath this reflector is a 6.9-km/s refractor, that is strongly reflective and magnetic, and is interpreted to be gabbro in Eocene age oceanic crust of the underthrust Yakutat terrane. Both wide-angle seismic and magnetic anomaly data indicate that the Yakutat terrane has been underthrust beneath the Prince William terrane for at least a few hundred kilometers. Wide-angle seismic data are consistent with a 9 to 10[degree] landward dip of the subducting Pacific plate, distinctly different from the inferred average 3 to 4[degree] dip of the overlying 6.9-km/s refractor and Wadati-Benioff seismic zone. The preferred interpretation of the geophysical data is that one composite plate, composed of the Pacific and Yakutat plates, is subducting beneath southern Alaska.« less

Origin and evolution of the alkalic ultramafic rocks in the Coyote Peak diatreme, Humboldt County, California

USGS Publications Warehouse

Morgan, J.W.; Czamanske, G.K.; Gregory, Wandless A.

1985-01-01

Instrumental-neutron-activation analyses are reported for two uncontaminated rocks, a phlogopite-rich clot, and two contaminated rocks from the Coyote Peak diatreme, northwestern California. These data, combined with Nd, Sr, and Pb isotopic evidence, have been modeled to a multi-stage evolution for the uncontaminated rocks. Fertile mantle material (refractory elements 2.5?? chondritic abundances; Rb/Sr = 0.029 by weight) was depleted about 900 m.y. ago by congruent melting and removal of ~4% basaltic liquid; this depleted residue provided the source rock from which the Coyote Peak magma was ultimately derived. About 66 m.y. ago, the depleted mantle residue was incongruently melted in the presence of H2O and CO2 at a total pressure > 26 kb to yield ~0.5% of a Si-poor, Ca-rich melt. This melt then metasomatized depleted garnet-free harzburgite in the upper mantle at about 26 kb to produce a rock similar to phlogopite-bearing wehrlite. About 29 m.y. ago, this rock was subjected to an increase in pressure to >26 kb and incongruently melted to give ~0.5% of a second-stage melt resembling olivine melilitite in composition. Enroute to the surface, about 28% olivine and 2% titanomagnetite were lost from the highly fluid melt. Coarse-grained phlogopite-rich clots in the uncontaminated rocks apparently crystallized from a latestage liquid derived from the uncontaminated melt. Contaminated rocks appear to be the result of partial assimilation of, and dilution by, ~14% Franciscan graywacke country rock. The diatreme was emplaced near a converging plate margin where young hot oceanic mantle and crust of the Juan de Fuca plate was probably subducting obliquely beneath a thin lip of the North American plate. The unusual chemistry of the rocks may be the result of this complex tectonic setting which could also have included local strike-slip and extensional environments within the two plates pierced by the diatreme. ?? 1985.

Geology and mineral deposits of an area in the Departments of Antioquia and Caldas (Subzone IIB), Colombia

USGS Publications Warehouse

Feininger, Tomas; Barrero L., Dario; Castro, Nestor; Hall, R.B.

1973-01-01

The Inventario Minero National (IMN), a four-year cooperative geologic mapping and mineral resources appraisal project, was accomplished under an agreement between the Republic of Colombia and the U. S. Agency for International Development from 1964 through 1969. Subzone IIB, consisting essentially of the east half of Zone comprises nearly 20,000 km2 principally in the Department of Antioquia but including also small parts of the Departments of Caldas and Tolima. The rocks in IIB range from Precambrian to Holocene. Precambrian feldspar-quartz gneiss occupies a mosaic of fault-bounded blocks intruded by igneous rocks between the Oto fault and the Rio Magdalena. Paleozoic rocks are extensive, and include lightly metamorphosed graptolite-bearing Ordovician shale at Cristalina, and a major suite of graphitic quartz-mica schist, feldspathic and aluminous gneiss, quartzite, marble, amphibolite, and other rocks. Syntectonic intrusive gneiss included many of the older rocks during a late Paleozoic(?) orogeny, which was accompanied by Abukuma-type metamorphosing from lowermost greenschist to upper amphibolite facies. A Jurassic diorite pluton bounded by faults cuts volcanic rocks of unknown age east of the Otu fault. Cretaceous rocks are major units. Middle Cretaceous carbonaceous shale, sandstone, graywacke, conglomerate, and volcanic rocks are locally prominent. The Antioquian batholith (quartz diorite) of Late Cretaceous age cuts the middle Cretaceous and older rocks. A belt of Tertiary nonmarine clastic sedimentary rocks crops out along the Magdalena Valley. Patches of Tertiary alluvium are locally preserved in the mountains. Quaternary alluvium, much of it auriferous, is widespread in modern stream valleys. Structurally IIB constitutes part of a vast complex synclinorium intruded concordantly by syntectonic catazonal or mesozonal felsic plutons, and by the later epizonal post-tectonic Antioquian batholith. Previously unrecognized major wrench faults are outstanding structural features of IIB. Some are traceable for several hundred kilometers and probably have displacements measurable in kilometers, although only the Palestina fault, with right-lateral displacement of 27.7 km, is accurately documented. Correlations of rocks mapped in IIB with those of outlying areas including neighboring IIA are discussed.

A geological and geochemical reconnaissance of the Tathlith one-degree quadrangle, sheet 19/43, Kingdom of Saudi Arabia

USGS Publications Warehouse

Overstreet, William C.

1978-01-01

The Tathlith one-degree quadrangle occupies an area of 11,620 sq km in the northeastern Asir region of the Kingdom of Saudi Arabia, in the southeastern part of the Precambrian shield. In the eastern part of the quadrangle the Precambrian rocks are covered by exposures of easterly-dipping sandstone of Cambrian or Ordovician age. A well-developed and highly integrated drainage system trending northward is worn into the Precambrian rocks, but for most of the year the wadis are dry. The Precambrian rocks of the quadrangle consist of an old, non-metamorphosed to variably metamorphosed sequence of volcanic and sedimentary rocks intruded by three main successions of plutonic and hypabyssal igneous rocks. The interlayered volcanic and sedimentary rocks occupy arcuate, north-trending fold belts in which old, rather tight north-trending folds have been refolded at least once by open folds with nearly east-trending axes. Old, north-trending left-lateral faults are associated with the fold belts and are themselves intersected by younger, northwest-trending faults. Motion on both sets of faults has been reactivated several times. The interlayered volcanic and sedimentary rocks are an eugeosynclinal sequence of graywacke and andesite with sparse marble, quartzite, and rhyolite. Andesite is the dominant component of the sequence. Plutonic or hypabyssal equivalents of the andesite intrude the volcanic-sedimentary sequence. In many places these rocks are essentially non-metamorphosed, but elsewhere they are faintly to strongly metamorphosed, or even polymetamorphosed. Dynamothermal metamorphism associated with the northerly folding, and contact metamorphism are the principal kinds of metamorphism. The metamorphic grade is mostly greenschist facies or albite-epidote amphibolite facies. The largest intrusive in the area is a batholith of regional dimension, the east side of which intrudes and divides the fold belts. Granite gneiss and granodiorite gneiss are the main components of the batholith. Biotite granite of calc-alkaline composition, and somewhat younger than the granite gneiss and granodiorite gneiss, forms northerly elongate to subcircular plutons in the gneisses and the rocks of the volcanic-sedimentary sequence.

Evidence from xenoliths for a dynamic lower crust, eastern Mojave Desert, California

USGS Publications Warehouse

Hanchar, John M.; Miller, Calvin F.; Wooden, Joseph L.; Bennett, Victoria C.; Staude, John-Mark G.

1994-01-01

Garnet-rich xenoliths in a Tertiary dike in the eastern Mojave Desert, California, preserve information about the nature and history of the lower crust. These xenoliths record pressures of ∼ 10–12 kbar and temperatures of ∼ 750–800°C. Approximately 25% have mafic compositions and bear hornblende + plagioclase + clinopyroxene + quartz in addition to garnet. The remainder, all of which contain quartz, include quartzose, quartzofeldspathic, and aluminous (kyanite±sillimanite-bearing) varieties. Most xenoliths have identifiable protoliths—mafic from intermediate or mafic igneous rocks, quartzose from quartz-rich sedimentary rocks, aluminous from Al-rich graywackes or pelites, and quartzofeldspathic from feldspathic sediments and/or intermediate to felsic igneous rocks. However, many have unusual chemical compositions characterized by high FeO(t), FeO(t)/MgO, Al2O3, and Al2O3/CaO, which correspond to high garnet abundance. The mineralogy and major-and trace-element compositions are consistent with the interpretation that the xenoliths are the garnet-rich residues of high-pressure crustal melting, from which granitic melt was extracted. High 87Sr/86Sr and low 143Nd/144Nd, together with highly discordant zircons from a single sample with Pb/Pb ages of ∼ 1.7 Ga, demonstrate that the crustal material represented by the xenoliths is at least as old as Early Proterozoic. This supracrustal-bearing lithologic assemblage may have been emplaced in the lower crust during either Proterozoic or Mesozoic orogenesis, but Sr and Nd model ages> 4 Ga require late Phanerozoic modification of parent/daughter ratios, presumably during the anatectic event. Pressures of equilibration indicate that peak metamorphism and melting occurred before the Mojave crust had thinned to its current thickness of <30 km. The compositions of the xenoliths suggest that the lower crust here is grossly similar to estimated world-wide lower-crustal compositions in terms of silica and mafic content; however, it is considerably more peraluminous, has a lower mg-number, and is distinctive in some trace element concentrations, reflecting its strong metasedimentary and restitic heritage.

Spatial distribution of chemical constituents in the Kuskokwim River, Alaska

USGS Publications Warehouse

Wang, Bronwen

1999-01-01

The effects of lithologic changes on the water quality of the Kuskokwim River, Alaska, were evaluated by the U.S. Geological Survey in June 1997. Water, suspended sediments, and bed sediments were sampled from the Kusko-kwim River and from three tributaries, the Holitna River, Red Devil Creek, and Crooked Creek. Dissolved boron, chromium, copper, manganese, zinc, aluminum, lithium, barium, iron, antimony, arsenic, mercury, and strontium were detected. Dissolved manganese and iron concentrations were three and four times higher in the Holitna River than in the Kusko-kwim River. Finely divided ferruginous materials found in the graywacke and shale units of the Kuskokwim Group are the probable source of the iron. The highest concentrations of dissolved strontium and barium were found at McGrath, and the limestone present in the upper basin was the most probable source of strontium. The total mercury concentrations on the Kuskokwim River decreased downstream from McGrath. Dissolved mercury was 24 to 32 percent of the total concentration. The highest concentrations of total mercury, and of dissolved antimony and arsenic were found in Red Devil Creek. The higher concentrations from Red Devil Creek did not affect the main stem mercury transport because the tributary was small relative to the Kuskokwim River. In Red Devil Creek, total mercury exceeded the concentration at which the U.S. Environmental Protection Agency (USEPA) indicates that aquatic life is affected and dissolved arsenic exceeded the USEPA's drinking-water standard. Background mercury and antimony concentrations in bed sediments ranged from 0.09 to 0.15 micrograms per gram for mercury and from 1.6 to 2.1 micrograms per gram for antimony. Background arsenic concentrations were greater than 27 micrograms per gram. Sites near the Red Devil mercury mine had mercury and antimony concentrations greater than background concentrations. These concentrations probably reflect the proximity to the ore body and past mining. Crooked Creek had mercury concentrations greater than the background concentration. The transport of suspended sediment-associated trace elements was lower for all elements in the lower river than in the upper river, indicating storage of sediments and their associated metals within the river system.

Structural development of an Archean Orogen, Western Point Lake, Northwest Territories

NASA Astrophysics Data System (ADS)

Kusky, Timothy M.

1991-08-01

The Point Lake orogen in the central Archean Slave Province of northwestern Canada preserves more than 10 km of structural relief through an eroded antiformal thrust stack and deeper anastomosing midcrustal mylonites. Fault restoration along a 25 km long transect requires a minimum of 69 km slip and 53 km horizontal shortening. In the western part of the orogen the basal decollement places mafic plutonic/volcanic rocks over an ancient tonalitic gneiss complex. Ten kilometers to the east in the Keskarrah Bay area, slices of gneiss unroofed on brittle thrusts shed molasse into several submerged basins. Conglomerates and associated thinly bedded sedimentary rocks are interpreted as channel, levee, and overbank facies of this thrust-related sedimentary fan system. The synorogenic erosion surface at the base of the conglomerate truncates premetamorphic or early metamorphic thrust faults formed during foreland propagation, while other thrusts related to hinterland-progressing imbrication displace this unconformity. Tightening of synorogenic depositional troughs resulted in the conglomerates' present localization in synclines to the west of associated thrust faults and steepening of structural dips. Eastern parts of the orogen consist of isoclinally folded graywackes composed largely of Mutti and Ricci-Lucchi turbidite facies B, C, and D, interpreted as submarine fan deposits eroded from a distant volcanic arc. Thrust faults in the metasedimentary terrane include highly disrupted slate horizons with meter-scale duplex structures, and recrystallized calcmylonites exhibiting sheath folds and boudin trains with very large interboudin distances. The sequence of fabric development and the overall geometry of this metasedimentary terrane strongly resembles younger forearc accretionary prisms. Conditions of deformation along the thrusts parallel the regional metamorphic zonation: amphibolite facies in the basal decollement through greenschist facies shear zones to cataclastic crush zones in the region of emergent thrusts in Keskarrah Bay. Depth differences can account for only half of the metamorphic gradient; thermal profiles which increased downwards in obducted greenstone belts and synthrusting plutonism explains other high metamorphic gradients. A tectonic model involving the collision of an accretionary prism with a continental margin best explains the structural and sedimentological evolution of the orogen.

Chemical weathering and loess inputs to soils in New Zealand's Wairarapa region

NASA Astrophysics Data System (ADS)

Lukens, C. E.; Norton, K. P.

2017-12-01

Geochemical mass-balance approaches are commonly used in soils to evaluate patterns in chemical weathering. In conjuction with cosmogenic nuclide measurements of total denudation or soil production, mass-balance approaches have been used to constrain rates of chemical weathering across a variety of landscapes. Here we present geochemical data from a series of soil pits in the Wairarapa region of New Zealand's North Island, where rates of soil production equal rates of total denudation measured using 10Be at sites nearby (i.e., the landscape is in steady state). Soil density increases with depth, consistent with steady weathering over the average soil residence time. However, soil geochemistry indicates very little chemical weathering has occurred, and immobile elements (Zr, Ti, and V) are depleted in soils relative to bedrock. This is contrary to the expected observation, wherein immobile elements should be enriched in soils relative to parent bedrock as weathered mobile solutes are progressively removed from soil. Our geochemical measurements suggest contributions from an exernal source, which has a different chemical composition than the underlying bedrock. We hypothesize that loess constitutes a substantial influx of additional material, and use a mixing model to predict geochemical patterns within soil columns. We evaluate the relative contributions of several likely loess sources, including tephra from the nearby Taupo Volcanic Center, local loess deposits formed during glacial-interglacial transitions, and far-travelling Australian dust. Using an established mass-balance approach with multiple immobile elements, we calculate the fraction of mass in soils contributed by loess to be as much as 25%. Combined with 10Be-derived estimates of soil production, we calculate average loess fluxes up to 320 t/km2/yr, which are consistent with previous estimates of loess acculumation over the late Holocene. Accounting for loess input, we find that chemical weathering fluxes are remarkably low in these soils, which sit atop fractured graywacke that likely contributes very few weatherable primary minerals. The significant loess flux in this region may have important implications for estimates of total denudation and soil production, and must be accounted for to determine patterns in chemical weathering.

Genesis of the Assif El Mal Zn-Pb (Cu, Ag) vein deposit. An extension-related Mesozoic vein system in the High Atlas of Morocco. Structural, mineralogical, and geochemical evidence

USGS Publications Warehouse

Bouabdellah, M.; Beaudoin, G.; Leach, D.L.; Grandia, F.; Cardellach, E.

2009-01-01

The Assif El Mal Zn-Pb (Cu-Ag) vein system, located in the northern flank of the High Atlas of Marrakech (Morocco), is hosted in a Cambro-Ordovician volcaniclastic and metasedimentary sequence composed of graywacke, siltstone, pelite, and shale interlayered with minor tuff and mudstone. Intrusion of synorogenic to postorogenic Late Hercynian peraluminous granitoids has contact metamorphosed the host rocks giving rise to a metamorphic assemblage of quartz, plagioclase, biotite, muscovite, chlorite, amphibole, chloritoid, and garnet. The Assif El Mal Zn-Pb (Cu-Ag) mineralization forms subvertical veins with ribbon, fault breccia, cockade, comb, and crack and seal textures. Two-phase liquid-vapor fluid inclusions that were trapped during several stages occur in quartz and sphalerite. Primary inclusion fluids exhibit Th mean values ranging from 104??C to 198??C. Final ice-melting temperatures range from -8.1??C to -12.8??C, corresponding to salinities of ???15 wt.% NaCl equiv. Halogen data suggest that the salinity of the ore fluids was largely due to evaporation of seawater. Late secondary fluid inclusions have either Ca-rich, saline (26 wt.% NaCl equiv.), or very dilute (3.5 wt.% NaCl equiv.) compositions and homogenization temperatures ranging from 75??C to 150??C. The ??18O and ??D fluid values suggest an isotopically heterogeneous fluid source involving mixing between connate seawater and black-shale-derived organic waters. Low ??13CVPDB values ranging from -7.5??? to -7.7??? indicate a homogeneous carbon source, possibly organic matter disseminated in black shale hosting the Zn-Pb (Cu-Ag) veins. The calculated ??34SH2S values for reduced sulfur (22.5??? to 24.3???) are most likely from reduction of SO42- in trapped seawater sulfate or evaporite in the host rocks. Reduction of sulfate probably occurred through thermochemical sulfate reduction in which organic matter was oxidized to produce CO2 which ultimately led to precipitation of saddle dolomite with isotopically light carbon. Lead isotope compositions are consistent with fluid-rock interaction that leached metals from the immediate Cambro-Ordovician volcaniclastic and metasedimentary sequence or from the underlying Paleo-Neoproterozoic crustal basement. Geological constraints suggest that the vein system of Assif El Mal formed during the Jurassic opening of the central Atlantic Ocean. ?? Springer-Verlag 2009.

Formation of the Archean crust of the ancient Vodlozero domain (Baltic shield)

NASA Astrophysics Data System (ADS)

Arestova, N. A.; Chekulaev, V. P.; Lobach-Zhuchenko, S. B.; Kucherovskii, G. A.

2015-03-01

The available geological, petrological, and isotopic data on Archean rocks of the Baltic shield are used to analyze the formation of the crust of the ancient Vodlozero domain. This made it possible to reveal the succession of endogenic processes in different parts of the domain and correlate them between each other. Several stages of magmatic processes reflecting changes in magma-generation environments are definable in the crust formation. The earliest stages of magmatism (3.24 and 3.13-3.15 Ga) are mostly represented by rocks of the tonalite-trondhjemite-granodiorite association. The next stage of endogenic activity (3020-2900 Ma) was marked by the formation of volcanics of the komatiite-basalt and andesite-dacite associations constituting greenstone belts in marginal parts of the Vodlozero domain and basic dikes accompanied by layered pyroxenite-norite-diorite intrusion in its central part. These basic bodies crossing earlier tonalities were formed in extension settings related to the formation of the mantle plume, which is confirmed by the rock composition. This stage culminated in the formation of trondhjemites at margins of greenstone structure. The next stage of endogenic activity commenced at 2890-2840 Ma by the emplacement of high-magnesian gabbro and diorite dikes in the western margin of the domain, where they cross rocks of the tonalitetrondhjemite association. This stage was marked by the formation of intermediate-acid subvolcanic bodies and dikes as well as basite intrusions including the layered and differentiated Semch intrusion, the largest one in the Vodlozero domain. The stage culminated at approximately 2850 Ma in the emplacement of tonalities of the limited distribution being represented by the Shilos massif in the north of the domain and Shal'skii massif on the eastern shore of Lake Onega. The important stage in the geological history of the Vodlozero domain is the formation of the intracratonic Matkalakhta greenstone belt at approximately 2.8 Ga, which includes arenite quartzite and graywackes and polymictic conglomerates developed in the Lake Oster area in addition to volcanics. These rocks indicate a stable tectonic regime, which resulted in deep erosion of the crust. The emplacement of sanukitoids (2.73-2.74 Ga) as well as subsequent two-feldspar granites (2.68-2.70 Ga) and basite dikes (2.61-2.65 Ga) may be considered as resulting from the plume influence on the relatively stabilized sialic crust of the Baltic shield.

Geologic setting of the Fortymile River area - Polyphase deformational history within part of the eastern Yukon-Tanana uplands of Alaska: A section in Geologic studies in Alaska by the U.S. Geological Survey, 1998

USGS Publications Warehouse

Day, Warren C.; Gamble, Bruce M.; Henning, Mitchell W.; Smith, Bruce D.

2000-01-01

The Fortymile River area lies within the Yukon-Tanana lithotectonic terrane of east-central Alaska. This terrane is a mosaic of several lithotectonic assemblages, each with a coherent lithologic, metamorphic, and deformational history. Previous workers have shown that the Fortymile River area is underlain by rocks of the Seventymile, Taylor Mountain, and Nisutlin assemblages. The Taylor Mountain tectonostratigraphic assemblage is the most widespread within study area and is made up of amphibolite-grade Paleozoic(?) metamorphosed supracrustal rocks that have been intruded by plutonic rocks. The protoliths for the supracrustal rocks include mafic volcanic(?) rocks, graywacke, sulfide-rich siliciclastic sediments, quartz-rich sandstone, pelite, and marble, all of which are cut by late sulfide-bearing quartz veins. The mafic metavolcanic(?) rocks are of both tholeiitic and calc-alkalic affinity and have distinctly different rare-earth-element abundances. The supracrustal rocks are interpreted to have been deposited on a continental margin and (or) distal to an island-arc complex in a back-arc basin.The Steele Creek Dome Tonalite is defined herein as a composite body of foliated biotite-hornblende tonalitic orthogneiss containing country-rock rafts of paragneiss. The complex lies within the Taylor Mountain assemblage and has been tectonized and presumably recrystallized during regional Early Jurassic ductile deformation. The tonalite is compositionally similar to other volcanic-arc granites. The entire sequence was intruded by a Early Jurassic(?) hornblende monzodioritediorite-quartz diorite suite.The area has been subjected to at least three phases of deformation. The first (D1) produced a strong regional S1 schistosity and local mineral lineations. The second (D2) deformation generated tight to isoclinal F2 folds, folding the S1 schistosity and L1 mineral lineations, and was accompanied by a weak axial-planar S2 cleavage and both L2 mineral and stretching lineations. The question remains if the D1 and D2 tectonic fabrics either (1) record end members of a continuous, relatively long lived, progressive ductile deformation associated with the peak regional metamorphism and northward-directed thrusting; or (2) were separate and distinct pulses of tectonism. The youngest deformation recognized (D3) folded the ductile fabric elements about south-plunging, east-vergent, open folds and records east-west-directed tectonic shortening.

Metamorphism within the Chugach accretionary complex on southern Baranof Island, southeastern Alaska

USGS Publications Warehouse

Zumsteg, Cathy L.; Himmelberg, Glen R.; Karl, Susan M.; Haeussler, Peter J.

2003-01-01

On Baranof Island, southeastern Alaska, we identify four metamorphic events that affect rocks associated with the Chugach accretionary complex. This study focuses on the M1 and M4 metamorphic events. Mesozoic schists, gneisses, and migmatitic gneisses exposed near the Kasnyku pluton on central Baranof Island represent the M1 metamorphic rocks. These rocks underwent amphibolite facies metamorphism. Calculated temperatures and pressures range from about 620 to 780 ºC and 5.5 to 6.6 kbar and are compatible with the observed metamorphic mineral assemblages.The M4 metamorphism affected rocks of the Sitka Graywacke on southern Baranof Island, producing extensive biotite and garnet zones as well as andalusite and sillimanite zones at the contacts of the Crawfish Inlet and Redfish Bay plutons. Calculated M4 temperatures and pressures from the andalusite and sillimanite zones range from 575 to 755 ºC and 3.4 to 6.9 kbar. These results fall within the sillimanite stability field, at pressures higher than andalusite stability. These results may indicate the M4 metamorphic event occurred along a P-T path along which the equilibration of aluminosilicate-garnet-plagioclase-quartz did not occur or was not maintained. This interpretation is supported by the occurrence of andalusite and sillimanite within the same sample. We propose the data reflect a clockwise P-T path with peak M4 metamorphism of the sillimanite-bearing samples adjacent to the intrusions at an approximate depth of 15 to 20 km, followed by rapid uplift without reequilibration of garnet-plagioclase-aluminosilicate-quartz.The large extent of the biotite zone, and possibly the garnet zone, suggests that an additional heat source must have existed to regionally metamorphose these rocks during the M4 event. We suggest the M4 regional thermal metamorphism and intrusion of the Crawfish Inlet and Redfish Bay plutons were synchronous and the result of heat flux from a slab window beneath the accretionary complex at that time. If our conclusions regarding the effect of the slab window are correct, the style of metamorphism is different from the Chugach metamorphic complex, which is clearly linked to a slab window. Therefore, our findings would suggest that there is no distinct metamorphic signature for slab window effects.

Reconnaissance geologic map of the Dubakella Mountain 15 quadrangle, Trinity, Shasta, and Tehama Counties, California

USGS Publications Warehouse

Irwin, William P.; Yule, J. Douglas; Court, Bradford L.; Snoke, Arthur W.; Stern, Laura A.; Copeland, William B.

2011-01-01

The Dubakella Mountain 15' quadrangle is located just south of the Hayfork quadrangle and just east of the Pickett Peak quadrangle. It spans a sequence of four northwest-trending tectonostratigraphic terranes of the Klamath Mountains geologic province that includes, from east to west, the Eastern Hayfork, Western Hayfork, Rattlesnake Creek, and Western Jurassic terranes, as well as, in the southwest corner of the quadrangle, part of a fifth terrane, the Pickett Peak terrane of the Coast Ranges geologic province. The Eastern Hayfork terrane is a broken formation and melange of volcanic and sedimentary rocks that include blocks of limestone and chert. The limestone contains late Permian microfossils of Tethyan faunal affinity. The chert contains radiolarians of Mesozoic age, mostly Triassic, but none clearly Jurassic. The Western Hayfork terrane is an andesitic volcanic arc that consists mainly of agglomerate, tuff, argillite, and chert, and includes the Wildwood pluton. That pluton is related to the Middle Jurassic (about 170 Ma) Ironside Mountain batholith that is widely exposed farther north beyond the Dubakella Mountain quadrangle. The Rattlesnake Creek terrane is a highly disrupted ophiolitic melange of probable Late Triassic or Early Jurassic age. Although mainly ophiolitic, the melange includes blocks of plutonic rocks (about 200 Ma) of uncertain genetic relation. Some scattered areas of well-bedded mildly slaty detrital rocks of the melange appear similar to Galice Formation (unit Jg) and may be inliers of the nearby Western Jurassic terrane. The Western Jurassic terrane consists mainly of slaty to phyllitic argillite, graywacke, and stretched-pebble conglomerate and is correlative with the Late Jurassic Galice Formation of southwestern Oregon. The Pickett Peak terrane, the most westerly of the succession of terranes of the Dubakella Mountain quadrangle, is mostly fine-grained schist that includes the blueschist facies mineral lawsonite and is of Early Cretaceous (about 120 Ma) metamorphic age. Remnants of the Great Valley sequence of dominantly Cretaceous marine sedimentary strata, which once covered much of the southern fringe of the Klamath Mountains, are present at three places in the Dubakella Mountain quadrangle. Mineral production in the quadrangle has included small amounts of gold, chromite, and manganese. This map of the Dubakella Mountain 15' quadrangle is a digital rendition of U.S. Geological Survey Miscellaneous Field Studies Map MF-1808, with various improvements and additions.

Jurassic-Paleogene intra-oceanic magmatic evolution of the Ankara Mélange, North-Central Anatolia, Turkey

NASA Astrophysics Data System (ADS)

Sarifakioglu, E.; Dilek, Y.; Sevin, M.

2013-11-01

Oceanic rocks in the Ankara Mélange along the Izmir-Ankara-Erzincan suture zone (IAESZ) in North-Central Anatolia include locally coherent ophiolite complexes (~179 Ma and ~80 Ma), seamount or oceanic plateau volcanic units with pelagic and reefal limestones (96.6 ± 1.8 Ma), metamorphic rocks with ages of 187.4 ± 3.7 Ma, 158.4 ± 4.2 Ma, and 83.5 ± 1.2 Ma, and subalkaline to alkaline volcanic and plutonic rocks of an island arc origin (~67-63 Ma). All but the arc rocks occur in a shaly-graywacke and/or serpentinite matrix, and are deformed by south-vergent thrust faults and folds that developed in the Middle to Late Eocene due to continental collisions in the region. Ophiolitic volcanic rocks have mid-ocean ridge (MORB) and island arc tholeiite (IAT) affinities showing moderate to significant LILE enrichment and depletion in Nb, Hf, Ti, Y and Yb, which indicate the influence of subduction-derived fluids in their melt evolution. Seamount/oceanic plateau basalts show ocean island basalt (OIB) affinities. The arc-related volcanic rocks, lamprophyric dikes and syeno-dioritic plutons exhibit high-K shoshonitic to medium-to high-K calc-alkaline compositions with strong enrichment in LILE, REE and Pb, and initial ϵNd values between +1.3 and +1.7. Subalkaline arc volcanic units occur in the northern part of the mélange, whereas the younger alkaline volcanic rocks and intrusions (lamprophyre dikes and syeno-dioritic plutons) in the southern part. The Early to Late Jurassic and Late Cretaceous epidote-actinolite, epidote-chlorite and epidote-glaucophane schists represent the metamorphic units formed in a subduction channel in the Northern Neotethys. The Middle to Upper Triassic neritic limestones spatially associated with the seamount volcanic rocks indicate that the Northern Neotethys was an open ocean with its MORB-type oceanic lithosphere by the Early Triassic. The Latest Cretaceous-Early Paleocene island arc volcanic, dike and plutonic rocks with subalkaline to alkaline geochemical affinities represent intraoceanic magmatism that developed on and across the subduction-accretion complex above a N-dipping, southward-rolling subducted lithospheric slab within the Northern Neotethys. The Ankara Mélange thus exhibits the record of ~120-130 million years of oceanic magmatism in geological history of the Northern Neotethys.

Tectonics of the North American Cordillera near the Fortieth Parallel

USGS Publications Warehouse

King, P.B.

1978-01-01

The North American Cordillera near the Fortieth Parallel consists of the following tectonic units: 1. (A) To the east is a reactivated cratonic area, in the Southern Rocky Mountains and Colorado Plateau, in which the supracrustal rocks (Cambrian to Cretaceous) were broadly deformed during the late Cretaceous-Paleocene Laramide orogeny, and the Precambrian basement was raised in folds of wide amplitude. 2. (B) West of it is a miogeosynclinal belt, in the eastern Great Basin, in which a thick sequence of Paleozoic carbonates and related deposits was thrust eastward along low-angle faults during the middle to late Cretaceous Sevier orogeny. The miogeosyncline is the downwarped western margin of the original North American continent, and its rocks accumulated on Precambrian basement. 3. (C) Beyond is a eugeosynclinal belt, in the western Great Basin, in which Paleozoic graywackes, cherts, and volcanics were thrust easteastward along low-angle faults during several Paleozoic orogenies - the mid-Paleozoic Antler orogeny which produced the Roberts thrust on the east, and the end-Paleozoic Sonoma orogeny which produced the Golconda thrust farther west. The Paleozoic eugeosynclinal rocks accumulated on oceanic basement. They are overlapped from the west by Triassic and Jurassic shelf deposits, which pass westward into eugeosynclinal deposits. 4. (D) A volcanic island-arc belt existed on the sites of the Sierra Nevada in Paleozoic and early Mesozoic time, which produced thick bodies of sediments and volcanics. During the mid-Mesozoic Nevadan orogeny these were steeply deformed and thrust westward over subduction zones, and were intruded by granitic rocks that rose from the upper mantle to form great batholiths. 5. (E) West of the Sierra Nevada, in the Great Valley, is a great sedimentary embankment of later Mesozoic flysch or turbidite, largely younger than the supracrustal rocks of the Sierra Nevada and the Nevadan orogeny. It was formed of the erosional products of the supracrustal and granitic rocks of the Sierra Nevada. 6. (F) This sequence is, in turn, thrust westward over the Mesozoic Franciscan terrane of the Coast Ranges, which forms the westernmost belt of the Cordillera, and which is being treated in other papers in this symposium. The net effect of the prolonged events that produced the Cordillera in this segment has been the addition of successive tectonic belts to the North American continent at the expense of the Pacific Ocean basin during Phanerozoic time. ?? 1978.

Jurassic-Paleogene intraoceanic magmatic evolution of the Ankara Mélange, north-central Anatolia, Turkey

NASA Astrophysics Data System (ADS)

Sarifakioglu, E.; Dilek, Y.; Sevin, M.

2014-02-01

Oceanic rocks in the Ankara Mélange along the Izmir-Ankara-Erzincan suture zone (IAESZ) in north-central Anatolia include locally coherent ophiolite complexes (∼ 179 Ma and ∼ 80 Ma), seamount or oceanic plateau volcanic units with pelagic and reefal limestones (96.6 ± 1.8 Ma), metamorphic rocks with ages of 256.9 ± 8.0 Ma, 187.4 ± 3.7 Ma, 158.4 ± 4.2 Ma, and 83.5 ± 1.2 Ma indicating northern Tethys during the late Paleozoic through Cretaceous, and subalkaline to alkaline volcanic and plutonic rocks of an island arc origin (∼ 67-63 Ma). All but the arc rocks occur in a shale-graywacke and/or serpentinite matrix, and are deformed by south-vergent thrust faults and folds that developed in the middle to late Eocene due to continental collisions in the region. Ophiolitic volcanic rocks have mid-ocean ridge (MORB) and island arc tholeiite (IAT) affinities showing moderate to significant large ion lithophile elements (LILE) enrichment and depletion in Nb, Hf, Ti, Y and Yb, which indicate the influence of subduction-derived fluids in their melt evolution. Seamount/oceanic plateau basalts show ocean island basalt (OIB) affinities. The arc-related volcanic rocks, lamprophyric dikes and syenodioritic plutons exhibit high-K shoshonitic to medium- to high-K calc-alkaline compositions with strong enrichment in LILE, rare earth elements (REE) and Pb, and initial ɛNd values between +1.3 and +1.7. Subalkaline arc volcanic units occur in the northern part of the mélange, whereas the younger alkaline volcanic rocks and intrusions (lamprophyre dikes and syenodioritic plutons) in the southern part. The late Permian, Early to Late Jurassic, and Late Cretaceous amphibole-epidote schist, epidote-actinolite, epidote-chlorite and epidote-glaucophane schists represent the metamorphic units formed in a subduction channel in the northern Neotethys. The Middle to Upper Triassic neritic limestones spatially associated with the seamount volcanic rocks indicate that the northern Neotethys was an open ocean with its MORB-type oceanic lithosphere by the early Triassic (or earlier). The latest Cretaceous-early Paleocene island arc volcanic, dike and plutonic rocks with subalkaline to alkaline geochemical affinities represent intraoceanic magmatism that developed on and across the subduction-accretion complex above a N-dipping, southward-rolling subducted lithospheric slab within the northern Neotethys. The Ankara Mélange thus exhibits the record of ∼ 120-130 million years of oceanic magmatism in geological history of the northern Neotethys.

Chemical Equilibrium of the Dissolved Uranium in Groundwaters From a Spanish Uranium-Ore Deposit

DOE Office of Scientific and Technical Information (OSTI.GOV)

Garralon, Antonio; Gomez, Paloma; Turrero, Maria Jesus

2007-07-01

The main objectives of this work are to determine the hydrogeochemical evolution of an uranium ore and identify the main water/rock interaction processes that control the dissolved uranium content. The Mina Fe uranium-ore deposit is the most important and biggest mine worked in Spain. Sageras area is located at the north part of the Mina Fe, over the same ore deposit. The uranium deposit was not mined in Sageras and was only perturbed by the exploration activities performed 20 years ago. The studied area is located 10 Km northeast of Ciudad Rodrigo (Salamanca) at an altitude over 650 m.a.s.l. Themore » uranium mineralization is related to faults affecting the metasediments of the Upper Proterozoic to Lower Cambrian schist-graywacke complex (CEG), located in the Centro-Iberian Zone of the Hesperian Massif . The primary uranium minerals are uraninite and coffinite but numerous secondary uranium minerals have been formed as a result of the weathering processes: yellow gummite, autunite, meta-autunite, torbernite, saleeite, uranotile, ianthinite and uranopilite. The water flow at regional scale is controlled by the topography. Recharge takes place mainly in the surrounding mountains (Sierra Pena de Francia) and discharge at fluvial courses, mainly Agueda and Yeltes rivers, boundaries S-NW and NE of the area, respectively. Deep flows (lower than 100 m depth) should be upwards due to the river vicinity, with flow directions towards the W, NW or N. In Sageras-Mina Fe there are more than 100 boreholes drilled to investigate the mineral resources of the deposit. 35 boreholes were selected in order to analyze the chemical composition of groundwaters based on their depth and situation around the uranium ore. Groundwater samples come from 50 to 150 m depth. The waters are classified as calcium-bicarbonate type waters, with a redox potential that indicates they are slightly reduced (values vary between 50 to -350 mV). The TOC varies between <0.1 and 4.0 mgC/L and the dissolved uranium has a maximum value of 7.7 mg/L. According the analytical data of dissolved uranium, the mineral closest to equilibrium seems to be UO{sub 2}(am). The tritium contents in the groundwaters vary between 1.5 and 7.3 T.U. Considering that the mean value of tritium in rainwater from the studied area has a value of 4 T.U., it can be concluded that the residence times of the groundwaters are relatively short, not longer than 50 years in the oldest case. (authors)« less

Kinematic analysis of mélange fabrics: examples and applications from the McHugh Complex, Kenai Peninsula, Alaska

NASA Astrophysics Data System (ADS)

Kusky, Timothy M.; Bradley, Dwight C.

1999-12-01

Permian to Cretaceous mélange of the McHugh Complex on the Kenai Peninsula, south-central Alaska includes blocks and belts of graywacke, argillite, limestone, chert, basalt, gabbro, and ultramafic rocks, intruded by a variety of igneous rocks. An oceanic plate stratigraphy is repeated hundreds of times across the map area, but most structures at the outcrop scale extend lithological layering. Strong rheological units occur as blocks within a matrix that flowed around the competent blocks during deformation, forming broken formation and mélange. Deformation was noncoaxial, and disruption of primary layering was a consequence of general strain driven by plate convergence in a relatively narrow zone between the overriding accretionary wedge and the downgoing, generally thinly sedimented oceanic plate. Soft-sediment deformation processes do not appear to have played a major role in the formation of the mélange. A model for deformation at the toe of the wedge is proposed in which layers oriented at low angles to σ1 are contracted in both the brittle and ductile regimes, layers at 30-45° to σ1 are extended in the brittle regime and contracted in the ductile regime, and layers at angles greater than 45° to σ1 are extended in both the brittle and ductile regimes. Imbrication in thrust duplexes occurs at deeper levels within the wedge. Many structures within mélange of the McHugh Complex are asymmetric and record kinematic information consistent with the inferred structural setting in an accretionary wedge. A displacement field for the McHugh Complex on the lower Kenai Peninsula includes three belts: an inboard belt of Late Triassic rocks records west-to-east-directed slip of hanging walls, a central belt of predominantly Early Jurassic rocks records north-south directed displacements, and Early Cretaceous rocks in an outboard belt preserve southwest-northeast directed slip vectors. Although precise ages of accretion are unknown, slip directions are compatible with inferred plate motions during the general time frame of accretion of the McHugh Complex. The slip vectors are interpreted to preserve the convergence directions between the overriding and underriding plates, which became more oblique with time. They are not considered indicative of strain partitioning into belts of orogen-parallel and orogen-perpendicular displacements, because the kinematic data are derived from the earliest preserved structures, whereas fabrics related to strain partitioning would be expected to be superimposed on earlier accretion-related fabrics.

Chemical fluxes and origin of a manganese carbonate-oxide-silicate deposit in bedded chert

USGS Publications Warehouse

Huebner, J.S.; Flohr, M.J.K.; Grossman, J.N.

1992-01-01

Lens-like rhodochrosite-rich bodies within interbedded chert and shale are associated with basalt and/or graywacke in ophiolitic and orogenic zones. The Buckeye manganese mine in the Franciscan Complex of the California Coast Ranges is associated with metagraywacke. Despite blueschist-facies metamorphism, this deposit preserves the compositions and some textural features of its sedimentary protoliths. For this reason, it is a suitable deposit with which to compare more intensely altered deposits, or deposits originating in different paleoenvironments. Six Mn-rich and three Mn-poor minerals form monomineralic layers and mixtures: rhodochrosite, gageite, Mn-oxides (hausmannite, braunite), divalent Mn-silicates (caryopilite, taneyamalite), chlorite, quartz (metachert) and aegirine-augite. The Mn-rich protoliths have high Mn/Fe combined with relatively low concentrations of Ca, Al, Ti, Co, Ni, Cu, Th and REE. REE patterns of various protoliths are distinct. Rhodochrosite and gageite layers are depleted (seawater ?? 5 ?? 104) and flat, whereas patterns of metachert and the Mn-silicate-rich layers mimic the patterns of metashale and metagraywacke (seawater ?? 106). Hausmannite layers have flat patterns (seawater ?? 7 ?? 104) whereas braunite-rich layers are more enriched (seawater ?? 2 ?? 105) and show a distinct positive Ce anomaly. Factor analysis reveals components and fluxes attributed to sub-seafloor fluids (Ni, As, Zn, Sb, W, Mn), seawater (Mg, Au, V, Mo), detritus and veins (Ca, Ba, Sr). Silica is negatively correlated with the sub-seafloor factor. The observed variances indicate that water from the sediment column mixed with seawater, that deposition occurred near the sediment-seawater interface before mixtures of subsurface fluid and seawater homogenized, and that the system was not entirely closed during metamorphism. The variations in REE enrichment can be related to kinetics of deposition: rhodochrosite and gageite were precipitated most rapidly, and therefore were the protoliths that most effectively diluted the REE-rich background resulting from fine clastic material (derived from distal turbidites). The variation of the Ce anomaly and U/Th among diverse lithologies and the differences in Mn oxidation states are consistent with progressive dilution of reduced subsurface fluids with oxidized seawater. By this scheme, rhodochrosite, gageite and hausmannite were deposited from the most reduced fluids, braunite from intermediate mixtures, and Mn-silicates from the sub-seafloor fluids most diluted with fresh seawater. Comparison of the Buckeye with other lens-like and sheet-like deposits having high Mn/Fe and containing Mn3+ and/or Mn2+ suggests that each had three essential fluxes: a sub-seafloor source of Mn, a local source of very soluble silica and a source of relatively fresh, oxygenated water. Additional fluxes, such as clastics, appear to be more characteristic of the paleoenvironment than the three essential fluxes. ?? 1992.

Hydrogeology of, and simulation of ground-water flow in a mantled carbonate-rock system, Cumberland Valley, Pennsylvania

USGS Publications Warehouse

Chichester, D.C.

1996-01-01

The U.S. Geological Survey conducted a study in a highly productive and complex regolith-mantled carbonate valley in the northeastern part of the Cumberland Valley, Pa., as part of its Appalachian Valleys and Piedmont Regional Aquifer-system Analysis program. The study was designed to quantify the hydrogeologic characteristics and understand the ground-water flow system of a highly productive and complex thickly mantled carbonate valley. The Cumberland Valley is characterized by complexly folded and faulted carbonate bedrock in the valley bottom, by shale and graywacke to the north, and by red-sedimentary and diabase rocks in the east-southeast. Near the southern valley hillslope, the carbonate rock is overlain by wedge-shaped deposit of regolith, up to 450 feet thick, that is composed of residual material, alluvium, and colluvium. Locally, saturated regolith is greater than 200 feet thick. Seepage-run data indicate that stream reaches, near valley walls, are losing water from the stream, through the regolith, to the ground-water system. Results of hydrograph-separation analyses indicate that base flow in stream basins dominated by regolith-mantled carbonate rock, carbonate rock, and carbonate rock and shale are 81.6, 93.0, and 67.7 percent of total streamflow, respectively. The relative high percentage for the regolith-mantled carbonate-rock basin indicates that the regolith stores precipitation and slowly, steadily releases this water to the carbonate-rock aquifer and to streams as base flow. Anomalies in water-table gradients and configuration are a result of topography and differences in the character and distribution of overburden material, permeability, rock type, and geologic structure. Most ground-water flow is local, and ground water discharges to nearby springs and streams. Regional flow is northeastward to the Susquehanna River. Average-annual water budgets were calculated for the period of record from two continuous streamflow-gaging stations. Average-annual precipitation range from 39.0 to 40.5 inches, and averages about 40 inches for the model area. Average-annual recharge, which was assumed equal to the average-annual base flow, ranged from 12 inches for the Conodoguinet Creek, and 15 inches for the Yellow Breeches Creek. The thickly-mantled carbonate system was modeled as a three- dimensional water-table aquifer. Recharge to, ground-water flow through, and discharge from the Cumberland Valley were simulated. The model was calibrated for steady-state conditions using average recharge and discharge data. Aquifer horizontal hydraulic conductivity was calculated from specific-capacity data for each geologic unit in the area. Particle-tracking analyses indicate that interbasin and intrabasin flows of groundwater occur within the Yellow Breeches Creek Basin and between the Yellow Breeches and Conodoguinet Creek Basins.

Gravity survey and regional geology of the Prince William Sound epicentral region, Alaska: Chapter C in The Alaska earthquake, March 27, 1964: regional effects

USGS Publications Warehouse

Case, J.E.; Barnes, D.F.; Plafker, George; Robbins, S.L.

1966-01-01

Sedimentary and volcanic rocks of Mesozoic and early Tertiary age form a roughly arcuate pattern in and around Prince William Sound, the epicentral region of the Alaska earthquake of 1964. These rocks include the Valdez Group, a predominantly slate and graywacke sequence of Jurassic and Cretaceous age, and the Orca Group, a younger sequence of early Tertiary age. The Orca consists of a lower unit of dense-average 2.87 g per cm3 (grams per cubic centimeter) pillow basalt and greenstone intercalated with sedimentary rocks and an upper unit of lithologically variable sandstone interbedded with siltstone or argillite. Densities of the clastic rocks in both the Valdez and Orca Groups average about 2.69 g per cm3. Granitic rocks of relatively low density (2.62 g per cm3) cut the Valdez and Orca Groups at several localities. Both the Valdez and the Orca Groups were complexly folded and extensively faulted during at least three major episodes of deformation: an early period of Cretaceous or early Tertiary orogeny, a second orogeny that probably culminated in late Eocene or early Oligocene time and was accompanied or closely followed by emplacement of granitic batholiths, and a third episode of deformation that began in late Cenozoic time and continued intermittently to the present. About 500 gravity stations were established in the Prince William Sound region in conjunction with postearthquake geologic investigations. Simple Bouguer anomaly contours trend approximately parallel to the arcuate geologic structure around the sound. Bouguer anomalies decrease northward from +40 mgal (milligals) at the southwestern end of Montague Island to -70 mgal at College and Harriman Fiords. Most of this change may be interpreted as a regional gradient caused by thickening of the continental crust. Superimposed on the gradient is a prominent gravity high of as much as 65 mgal that extends from Elrington Island on the southwest, across Knight and Glacier Islands to the Ellamar Peninsula and Valdez on the northeast. This high coincides with the wide belt of greenstone and pillow basalt of the Orca Group and largely reflects the high density of these volcanic rocks. A large low in the east-central part of the sound is inferred to have a composite origin, and results from the combined effects of low-density sedimentary and granitic rocks. The Prince William Sound gravity high extends southwest-northeast without major horizontal offset for more than 100 miles. Thus the belt of volcanic rocks causing the high constitutes a major virtually continuous, geologic element of south-central Alaska.

Geologic Reconnaissance of the Antelope-Ashwood Area, North-Central Oregon: With Emphasis on the John Day Formation of Late Oligocene and Early Miocene Age

USGS Publications Warehouse

Peck, Dallas L.

1964-01-01

This report briefly describes the geology of an area of about 750 square miles in Jefferson, Wasco, Crook, and Wheeler Counties, Oregon. About 16,000 feet of strata that range in age from pre-Tertiary to Quaternary are exposed. These include the following units: pre-Tertiary slate, graywacke, conglomerate, and meta-andesite; Clarno Formation of Eocene age - lava flows, volcanic breccia, tuff, and tuffaceous mudstone, chiefly of andesitic composition; John Day Formation of late Oligocene and early Miocene age - pyroclastic rocks, flows, and domes, chiefly of rhyolitic composition; Columbia River Basalt of middle Miocene age - thick, columnar jointed flows of very fine grained dense dark-gray basalt; Dalles Formation of Pliocene age - bedded tuffaceous sandstone, siltstone, and conglomerate; basalt of Pliocene or Pleistocene age - lava flows of porous-textured olivine basalt; and Quaternary loess, landslide debris, and alluvium. Unconformities separate pre-Tertiary rocks and Clarno Formation, Clarno and John Day Formations, John Day Formation and Columbia River Basalt, and Columbia River Basalt and Dalles Formation. The John Day Formation, the only unit studied in detail, consists of about 4,000 feet of tuff, lapilli tuff, strongly to weakly welded rhyolite ash flows, and less abundant trachyandesite flows and rhyolite flows and domes. The formation was divided into nine mappable members in part of the area, primarily on the basis of distinctive ledge-forming welded ash-flow sheets. Most of the sheets are composed of stony rhyolite containing abundant lithophysae and sparse phenocrysts. One sheet contains 10 to 20 percent phenocrysts, mostly cryptoperthitic soda sanidine, but including less abundant quartz, myrmekitic intergrowths of quartz and sanidine, and oligoclase. The rhyolitic ash flows and lava flows were extruded from nearby vents, in contrast to some of the interbedded air-fall tuff and lapilli tuff of dacitic and andesitic composition that may have been derived from vents in an ancestral Cascade Range. The John Day is dated on the basis of a late Oligocene flora near the base of the formation and early Miocene faunas near the top of the formation. The middle Miocene and older rocks in the Antelope-Ashwood area are broadly folded and broken along northeast-trending faults. Over much of the area the rocks dip gently eastward from the crest of a major fold and are broken along a series of steeply dipping antithetic strike faults. Pliocene and Quaternary strata appear to be undeformed. At the Priday agate deposit, chalcedony-filled spherulites (thunder-eggs) occur in the lower part of a weakly welded rhyolitic ash flow. The so-called thunder-eggs are small spheroidal bodies, about 3 inches in average diameter; each consists of a chalcedonic core surrounded by a shell of welded tuff that is altered to radially oriented fibers of cristobalite and alkalic feldspar.

Petrology of the Plutonic Rocks of west-central Alaska

USGS Publications Warehouse

Miller, Thomas P.

1970-01-01

A series of plutons in west-central Alaska defines the Hogatza plutonic belt which extends for about 200 miles in an east-west direction from the northeastern Seward Peninsula to the Koyukuk River. The plutonic rocks have an aggregate area of about 1,200 square miles and their composition, distribution, and possible petrogenesis are discussed for the first time in this report. Field, petrographic and chemical data supported by K/Ar age dating indicate the plutonic rocks are divisible into two suites differing in age, location, and composition. The western plutons are mid-Cretaceous (~100 m.y.) in age and consist of a heterogeneous assemblage of monzonite, syenite, quartz monzonite. Associated with these granitic rocks is a group of alkaline sub-silicic rocks that forma belt of intrusive complexes extending for a distance of at least 180 miles from west-central Alaska to the Bering Sea. The complex at Granite Mountain shows a rare example of zoning from an alkaline rim to a quartz-bearing core. The occurrence of a similar complex at Cape Dezhnev on the easternmost tip of Siberia suggests the alkaline province may extend into Siberia. The easternmost plutons are Late Cretaceous (180 m.y.) in age and composed primarily of granodiorite and quartz monzonite similar to calc-alkaline plutons found throughout the North America Cordillera. The plutons are epizonal and intrude deformed but unmetamorphosed Lower Cretaceous andesitic volcanics and volcanic graywacke which constitute the highly mobile Yukon-Koyukuk volcanogenic province of west-central Alaska. No older rocks have been found within the confines of this vast tract; the occurrence of a bounding ophiolite sequence has lead to the suggestion that the province was formed by large-scale rifting and is underlain by oceanic crust. The possibility of no juvenile sialic crust over much of the area suggests that the potassium-rich magma now represented by the alkaline rocks originated in the mantle. The distribution of the alkaline rocks appears to be related to regional structural features, particularly the boundary between the Mesozoic volcanogenic province of west-central Alaska and the thrust-faulted province of metamorphic-plutonic and sedimentary rocks of Paleozoic and Precambrian age that forms the eastern Seward Peninsula. This boundary may have been a zone of structural weakness along which alkaline magma was generated. Modal and chemical trends suggest that the potassium-rich magma influenced the composition of more granitic magmas forming at higher levels. The latter may have been forming as a result of anatexis of andesite and mixing of mantle-derived mafic magma. The result is the heterogeneous assemblage of generally potassium-rich plutonic rocks that forms the west end of the Hogataza plutonic belt. The loci of magmatism in west-central Alaska shifted east in Late Cretaceous time and the eastern plutons show only local signs of potassium enrichment. They are compositionally homogeneous and differences within plutons appear due to local contamination.

Three-dimensional numerical reservoir simulation of the EGS Demonstration Project at The Geysers geothermal field

NASA Astrophysics Data System (ADS)

Borgia, Andrea; Rutqvist, Jonny; Oldenburg, Curt M.; Hutchings, Lawrence; Garcia, Julio; Walters, Mark; Hartline, Craig; Jeanne, Pierre; Dobson, Patrick; Boyle, Katie

2013-04-01

The Enhanced Geothermal System (EGS) Demonstration Project, currently underway at the Northwest Geysers, California, aims to demonstrate the feasibility of stimulating a deep high-temperature reservoir (up to 400 °C) through water injection over a 2-year period. On October 6, 2011, injection of 25 l/s started from the Prati 32 well at a depth interval of 1850-2699 m below sea level. After a period of almost 2 months, the injection rate was raised to 63 l/s. The flow rate was then decreased to 44 l/s after an additional 3.5 months and maintained at 25 l/s up to August 20, 2012. Significant well-head pressure changes were recorded at Prati State 31 well, which is separated from Prati 32 by about 500 m at reservoir level. More subdued pressure increases occur at greater distances. The water injection caused induced seismicity in the reservoir in the vicinity of the well. Microseismic monitoring and interpretation shows that the cloud of seismic events is mainly located in the granitic intrusion below the injection zone, forming a cluster elongated SSE-NNW (azimuth 170°) that dips steeply to the west. In general, the magnitude of the events increases with depth and the hypocenter depth increases with time. This seismic cloud is hypothesized to correlate with enhanced permeability in the high-temperature reservoir and its variation with time. Based on the existing borehole data, we use the GMS™ GUI to construct a realistic three-dimensional (3D) geologic model of the Northwest Geysers geothermal field. This model includes, from the top down, a low permeability graywacke layer that forms the caprock for the reservoir, an isothermal steam zone (known as the normal temperature reservoir) within metagraywacke, a hornfels zone (where the high-temperature reservoir is located), and a felsite layer that is assumed to extend downward to the magmatic heat source. We then map this model onto a rectangular grid for use with the TOUGH2 multiphase, multicomponent, non-isothermal porous media numerical flow simulator in order to model the evolution and injection-related operational dynamics of The Geysers geothermal field. At the bottom of the domain in the felsite, we impose a constant temperature, constant saturation, low-permeability boundary. Laterally we set no-flow boundaries (no mass or heat flow), while at the top we use a fully aqueous-phase-saturated constant atmospheric pressure boundary condition. We compute initial conditions for two different conceptual models. The first conceptual model has two phases (gas and aqueous) with decreasing proportions of gas from the steam zone downward; the second model has dry steam all the way from the steam zone to the bottom. The first may be more similar to a pre-exploitation condition, before production reduced pressure and dried out the system, while the second is calibrated to the pressure and temperature actually measured in the reservoir today. Our preliminary results are in reasonable agreement with the pressure monitoring at Prati State 31. These results will be used in hydrogeomechanical modeling to plan, design, and validate the effects of injection in the system.

Bedrock geologic map of the Miles Pond and Concord quadrangles, Essex and Caledonia Counties, Vermont, and Grafton County, New Hampshire

USGS Publications Warehouse

Rankin, Douglas W.

2018-04-20

The bedrock geologic map of the Miles Pond and Concord quadrangles covers an area of approximately 107 square miles (276 square kilometers) in east-central Vermont and adjacent New Hampshire, north of and along the Connecticut River. This map was created as part of a larger effort to produce a new bedrock geologic map of Vermont through the collection of field data at a scale of 1:24,000. The majority of the map area consists of the Bronson Hill anticlinorium, a post-Early Devonian structure that is cored by metamorphosed Cambrian to Silurian sedimentary, volcanic, and plutonic rocks. A major feature on the map is the Monroe fault, interpreted to be a west-directed, steeply dipping Late Devonian (Acadian) thrust fault. To the west of the Monroe fault, rocks of the Connecticut Valley-Gaspé trough dominate and consist primarily of metamorphosed Silurian and Devonian sedimentary rocks. To the north, the Victory pluton intrudes the Bronson Hill anticlinorium. The Bronson Hill anticlinorium consists of the metamorphosed Albee Formation, the Ammonoosuc Volcanics, the Comerford Intrusive Complex, the Highlandcroft Granodiorite, and the Joselin Turn tonalite. The Albee Formation is an interlayered, feldspathic metasandstone and pelite that is locally sulfidic. Much of the deformed metasandstone is tectonically pinstriped. In places, one can see compositional layering that was transposed by a steeply southeast-dipping foliation. The Ammonoosuc Volcanics are lithologically complex and predominantly include interlayered and interfingered rhyolitic to basaltic volcanic and volcaniclastic rocks, as well as lesser amounts of siltstone, phyllite, graywacke, and grit. The Comerford Intrusive Complex crops out east of the Monroe fault and consists of metamorphosed gabbro, diorite, tonalite, aplitic tonalite, and crosscutting diabase dikes. Abundant mafic dikes from the Comerford Intrusive Complex intruded the Albee Formation and Ammonoosuc Volcanics east of the Monroe fault. The Highlandcroft Granodiorite and Joslin Turn tonalite plutons intruded during the Middle to Late Ordovician.West of the Monroe fault, the Connecticut Valley-Gaspé trough consists of the Silurian and Devonian Waits River and Gile Mountain Formations. The Waits River Formation is a carbonaceous muscovite-biotite-quartz (±garnet) phyllite containing abundant beds of micaceous quartz-rich limestone. The Gile Mountain Formation consists of interlayered metasandstone and graphitic (and commonly sulfidic) slate, along with minor calcareous metasandstone and ironstone. Graded bedding is common in the Gile Mountain Formation. Rocks of the Devonian New Hampshire Plutonic Suite intruded as plutons, dikes, and sills. The largest of these is the Victory pluton, which consists of weakly foliated, biotite granite and granodiorite. The Victory pluton also intruded a large part of the Albee Formation to the north.This report consists of a geologic map and an online geographic information systems database that includes contacts of bedrock geologic units, faults, outcrops, and structural geologic information. The geologic map is intended to serve as a foundation for applying geologic information to problems involving land use decisions, groundwater availability and quality, earth resources such as natural aggregate for construction, assessment of natural hazards, and engineering and environmental studies for waste disposal sites and construction projects.

Weathering and genesis of Soils from Ellsworth Mountains, East Antarctica

NASA Astrophysics Data System (ADS)

Karoline Delpupo Souza, Katia; Schaefer, Carlos Ernesto; Michel, Roberto; Monari, Julia; Machado, Vania

2015-04-01

Knowledge on Antarctic soils from the Ellsworth Mountains (EM) are patchy comparatively with Dry Valleys soils from the Transantartic Mountains, and could help understand the genesis of cryogenic soils under extreme dry, cold desert conditions. The EM are a slightly arcuate 350-km-long north-northwest-trending mountain chain is bordered on the west by the polar plateau of West Antarctica and on the east by Ronne Ice Shelf. The range is as much as 90 km wide and constitutes one of the largest areas of exposed bedrock in West Antarctica. The stratigraphic succession in the EM includes strata from Cambriam to Permian in age. The objective of this study is to analyze the properties of soils from EM in order to identify the main factors and processes involved in soil formation under cold desert conditions in Antarctica. The sampling design aimed to represent the different geological substrates (marble-clast conglomerate, graywacke, argillite, conglomerate, black shale, marble and quartzite) as well as altitudinal levels and landforms within the same substrate. We characterized soils from EM regarding their morphological, physics and chemical properties. Soil samples were air dried and passed through 2 mm sieves. After removal of water soluble salts, the samples were submitted to chemical and physical analyses such as: pH in water, potential acidity (H + Al), exchangeable bases, total organic carbon, electric conductivity, soil texture and color. The soils classify, for the most part, in weathering stages 1 to 2. Only in the upper parts of ridges were there traces of soils at weathering stage 3. This indicates that much of the present icefree topography has been overridden by ice within the last few hundred thousand years. Cryoturbation is a widespread phenomenon in this area resulting in intense cryoclastic weathering and patterned ground, forming sorted circles, stripes and gelifluxion lobes. The soil show low horizontation, discrete patches of salt on the surface, and salt crusts beneath the rock fragments. Despite of the low weathering stage of the soil, they have yellowish hue and high chroma values from influence by sulfide material. Boulders on moraines show staining, pitting, spalling, and some striations. All soil are alkaline in reaction, with pHs at the range between 7.5-9.2. Cryptogamic (lichens or mosses) crusts are absent, and the organic matter contents were invariably very low, ranging between 0.13 and 0.38%. Permafrost is continuous and occurs close to the surface, at between 5-15 cm down the top. The available P background is also very low (< 5.3 mg/kg), exchangeable K and Na levels are surprisingly low for Polar Desert soils. Soils are all skelletic, with a predominance of coarse materials. CEC is medium to high, and Ca-dominated, as a result of a strong limestone influence in the moraine parent materials. The main salts present are Ca and Na-sulphate forms, and less cloride forms, and clay sized materials are dominated by salts in all soils, especially below 5 cm depth.

Petrology of the Rainy Lake area, Minnesota, USA-implications for petrotectonic setting of the archean southern Wabigoon subprovince of the Canadian Shield

NASA Astrophysics Data System (ADS)

Day, Warren C.

1990-08-01

The Rainy Lake area in northern Minnesota and southwestern, Ontario is a Late Archean (2.7 Ga) granite-greenstone belt within the Wabigoon subprovince of the Canadian Shield. In Minnesota the rocks include mafic and felsic volcanic rocks, volcaniclastic, chemical sedimentary rocks, and graywacke that are intrucded by coeval gabbro, tonalite, and granodiorite. New data presented here focus on the geochemistry and petrology of the Minnesota part of the Rainy Lake area. Igneous rocks in the area are bimodal. The mafic rocks are made up of three distinct suites: (1) low-TiO2 tholeiite and gabbro that have slightly evolved Mg-numbers (63 49) and relatively flat rare-earth element (REE) patterns that range from 20 8 x chondrites (Ce/YbN=0.8 1.5); (2) high-TiO2 tholeiite with evolved Mg-numbers (46 29) and high total REE abundances that range from 70 40 x chondrites (Ce/YbN=1.8 3.3), and (3) calc-alkaline basaltic andesite and geochemically similar monzodiorite and lamprophyre with primitive Mg-numbers (79 63), enriched light rare-earth elements (LREE) and depleted heavy rare-earth elements (HREE). These three suites are not related by partial melting of a similar source or by fractional crystallization of a common parental magma; they resulted from melting of heterogeneous Archean mantle. The felsic rocks are made up of two distinct suites: (1)low-Al2O3 tholeiitic rhyolite, and (2) high-Al2O3 calc-alkaline dacite and rhyolite and consanguineous tonalite. The tholeiitic felsic rocks are high in Y, Zr, Nb, and total REE that are unfractionated and have pronounced negative Eu anomalies. The calcalkaline felsic rocks are depleted in Y, Zr, and Nb, and the REE that are highly fractionated with high LREE and depleted HREE, and display moderate negative Eu anomalies. Both suites of felsic rocks were generated by partial melting of crustal material. The most reasonable modern analog for the paleotectonic setting is an immature island arc. The bimodal volcanic rocks are intercalated with sedimentary rocks and have been intruded by pre- and syntectonic granitoid rocks. However, the geochemistry of the mafic rocks does not correlate fully with that of mafic rocks in modern are evvironments. The low-TiO2 tholeiite is similar to both N-type mid-ocean-ridge basalt (MORB) and low-K tholeiite from immature marginal basins. The calc-alkaline basaltic andesite is like that of low-K calc-alkaline mafic volcanic rocks from oceanic volcanic arcs; however, the high-TiO2 tholeiite is most similar to modern E-type MORB, which occurs in oceanic rifts. The conundrum may be explained by: (1) rifting of a pre-existing immature arc system to produce the bimodal volcanic rocks and high-TiO2 tholeiite; (2) variable enrichment of a previously depleted Archean mantle, to produce both the low- and high-TiO2 tholeiite and the calc-alkaline basaltic andesite, and/or (3) enrichment of the parental rocks of the high-TiO2 tholeiite by crustal contamination.

Petrology of the Rainy Lake area, Minnesota, USA-implications for petrotectonic setting of the archean southern Wabigoon subprovince of the Canadian Shield

USGS Publications Warehouse

Day, W.C.

1990-01-01

The Rainy Lake area in northern Minnesota and southwestern, Ontario is a Late Archean (2.7 Ga) granite-greenstone belt within the Wabigoon subprovince of the Canadian Shield. In Minnesota the rocks include mafic and felsic volcanic rocks, volcaniclastic, chemical sedimentary rocks, and graywacke that are intrucded by coeval gabbro, tonalite, and granodiorite. New data presented here focus on the geochemistry and petrology of the Minnesota part of the Rainy Lake area. Igneous rocks in the area are bimodal. The mafic rocks are made up of three distinct suites: (1) low-TiO2 tholeiite and gabbro that have slightly evolved Mg-numbers (63-49) and relatively flat rare-earth element (REE) patterns that range from 20-8 x chondrites (Ce/YbN=0.8-1.5); (2) high-TiO2 tholeiite with evolved Mg-numbers (46-29) and high total REE abundances that range from 70-40 x chondrites (Ce/YbN=1.8-3.3), and (3) calc-alkaline basaltic andesite and geochemically similar monzodiorite and lamprophyre with primitive Mg-numbers (79-63), enriched light rare-earth elements (LREE) and depleted heavy rare-earth elements (HREE). These three suites are not related by partial melting of a similar source or by fractional crystallization of a common parental magma; they resulted from melting of heterogeneous Archean mantle. The felsic rocks are made up of two distinct suites: (1)low-Al2O3 tholeiitic rhyolite, and (2) high-Al2O3 calc-alkaline dacite and rhyolite and consanguineous tonalite. The tholeiitic felsic rocks are high in Y, Zr, Nb, and total REE that are unfractionated and have pronounced negative Eu anomalies. The calcalkaline felsic rocks are depleted in Y, Zr, and Nb, and the REE that are highly fractionated with high LREE and depleted HREE, and display moderate negative Eu anomalies. Both suites of felsic rocks were generated by partial melting of crustal material. The most reasonable modern analog for the paleotectonic setting is an immature island arc. The bimodal volcanic rocks are intercalated with sedimentary rocks and have been intruded by pre- and syntectonic granitoid rocks. However, the geochemistry of the mafic rocks does not correlate fully with that of mafic rocks in modern are evvironments. The low-TiO2 tholeiite is similar to both N-type mid-ocean-ridge basalt (MORB) and low-K tholeiite from immature marginal basins. The calc-alkaline basaltic andesite is like that of low-K calc-alkaline mafic volcanic rocks from oceanic volcanic arcs; however, the high-TiO2 tholeiite is most similar to modern E-type MORB, which occurs in oceanic rifts. The conundrum may be explained by: (1) rifting of a pre-existing immature arc system to produce the bimodal volcanic rocks and high-TiO2 tholeiite; (2) variable enrichment of a previously depleted Archean mantle, to produce both the low- and high-TiO2 tholeiite and the calc-alkaline basaltic andesite, and/or (3) enrichment of the parental rocks of the high-TiO2 tholeiite by crustal contamination. ?? 1990 Springer-Verlag.

Precambrian domains in Lithuania: evidence of terrane tectonics

NASA Astrophysics Data System (ADS)

Skridlaite, Grazina; Motuza, Gediminas

2001-09-01

The West Lithuanian Granulite (WLG) and East Lithuanian domains (ELD) form the Proterozoic basement of Lithuania and can be distinguished on the basis of differing structural patterns, lithologies, and evolutionary histories. They are juxtaposed along the Mid-Lithuanian Suture Zone (MLSZ). In the WLG, the main lithotectonic complexes comprise felsic and intermediate, mostly metasedimentary granulites in the south-west and mafic metaigneous granulites in the north-east. The former are interpreted as marine metapelites, while most of the mafic ones have been derived from island-arc tholeiites. These rock complexes trend NW-SE and are marked by contrasting gravity and magnetic anomalies. NE- and E-W-striking faults and shear zones complicate the potential-field patterns. Sets of NW-trending anomalies also extend from Lithuania across the Baltic Sea to south-central Sweden and indicate that the WLG complexes continue into the Baltic/Fennoscandian Shield. Voluminous anatectic granites alternate with the metapelites, whereas the mafic granulites occur together with enderbites and charnockites. In the ELD, the main structures produce strong, NNE-SSW-oriented gravity and magnetic anomalies which trend parallel to the Belarus-Baltic Granulite Belt (BBG) and other terranes situated still farther east. The ELD is composed of metasedimentary rocks interpreted as one-time graywackes, shales and dolomites accumulated in continental-margin arc and shallow-water basinal environments. Amphibolites and gabbros with MORB and IAT characteristics, and voluminous granitoids are also present. The coexistence of juvenile mafic rocks with continental-margin and shelf sediments suggests an oceanic back-arc setting. The two Lithuanian basement domains display contrasting metamorphic histories that suggest separate developments before the eventual amalgamation. In the WLG, the metapelites indicate peak metamorphism at high temperatures (up to 850-900°C) and moderate pressures (8-10 kbar). This was followed by cooling and reheating, and then an uplift event. Repeated magmatic underplating accompanied the metamorphism. In the ELD, in contrast, the rocks have been subjected to comprehensive metamorphism under moderate, amphibolite-facies conditions. That metamorphism, however, was not uniform throughout. The metasediments in the east have recorded pressures similar to those in the neighbouring BBG (7-8 kbar) but lower temperatures (650-680°C), while in the central and western parts of the ELD, metamorphism occurred at ca. 480-580°C with pressures increasing from 3-4 kbar in the centre, to 6 kbar close to the western boundary. Reheating to 700°C due to a ca. 1.5-Ga magmatic event is characteristic. The MLSZ, which separates the two Lithuanian basement domains from each other, is a N-S-oriented, ca. 30-50 km wide, westward-plunging crustal discontinuity marked by magnetic and gravity highs, mafic and felsic intrusions, and sheared rocks. Crustal thicknesses change from 42-44 km in the west to 50 km in the eastern side of the Zone, which also truncates a crustal low-velocity layer characteristic of the WLG. The amalgamation of the WLG and ELD along the MLSZ occurred at ca. 1.71-1.66 Ga, after which time both domains were affected by the same post-kinematic, anorogenic magmatism ca. 1.58-1.45 Ga ago. That event and related shearing were responsible for some ultimate refragmentation of the Lithuanian basement terranes.

Regional metamorphism in the Condrey Mountain Quadrangle, north-central Klamath Mountains, California

USGS Publications Warehouse

Hotz, Preston Enslow

1979-01-01

A subcircular area of about 650 km 2 in northern California and southwestern Oregon is occupied by rocks of the greenschist metamorphic facies called the Condrey Mountain Schist. This greenschist terrane is bordered on the east and west by rocks belonging to the amphibolite metamorphic facies that structurally overlie and are thrust over the Condrey Mountain Schist. The amphibolite facies is succeeded upward by metavolcanic and metasedimentary rocks belonging to the greenschist metamorphic facies. The Condrey Mountain Schist is composed predominantly of quartz-muscovite schist and lesser amounts of actinolite-chlorite schist formed by the metamorphism of graywacke and spilitic volcanic rocks that may have belonged to the Galice Formation of Late Jurassic age. Potassium-argon age determinations of 141?4 m.y. and 155?5 m.y. obtained on these metamorphic rocks seem to be incompatible with the Late Jurassic age usually assigned the Galice. The rocks that border the amphibolite facies are part of an extensive terrane of metavolcanic and metasedimentary rocks belonging to the western Paleozoic and Triassic belt. The metavolcanic rocks include some unmetamorphosed spilite but are mostly of the greenschist metamorphic facies composed of oligoclase (An15-20) and actinolite with subordinate amounts of chlorite and clinozoisiteepidote. The interbedded sedimentary rocks are predominantly argillite and slaty argillite, less commonly siliceous argillite and chert, and a few lenticular beds of marble. On the south, high-angle faults and a tabular granitic pluton separate the greenschist metavolcanic terrane from the amphibolite facies rocks; on the east, nonfoliated amphibolite is succeeded upward, apparently conformably, by metasedimentary rocks belonging to the greenschist metavolcanic terrane. In the southern part of Condrey Mountain quadrangle, an outlier of a thrust plate composed of the Stuart Fork Formation overlies the metavolcanic and metasedimentary rocks. The Stuart Fork in this region is composed of siliceous phyllite and phyllitic quartzite and is believed to be the metamorphosed equivalent of rocks over which it is thrust. In the Yreka-Fort Jones area, potassium-argon determinations on mica from the blueschist facies in the Stuart Fork gave ages of approximately 220 m.y. (Late Triassic) for the age of metamorphism. Rocks of the amphibolite facies structurally overlie the Condrey Mountain Schist along a moderate to steeply dipping thrust fault. The amphibolite terrane is composed of amphibolite and metasedimentary rocks in approximately equal amounts accompanied by many bodies of serpentinite and a number of gabbro and dioritic plutons. Most of the amphibolite is foliated, but some is nonfoliated; the nonfoliated amphibolite has an amphibolite mineralogy and commonly a relict volcanic rock texture. The nonfoliated amphibolite occurs on the southern and eastern borders of the amphibolite terrane between the areas offoliated amphibolite and the overly ing metavolcanic and metasedimentary rocks. Hornblende and plagioclase (An30-35) are the characteristic minerals, indicating that the rocks are of the almandine-amphibolite metamorphic facies. The metasedimentary rocks interbedded with the amphibolites include siliceous schist and phyllite, minor quartzite, and subordinate amounts of marble. Potassium-argon age dates obtained on hornblende from foliated amphibolite yield ages of 146?4 and 148? 4 m.y., suggesting a Late Jurassic metamorphic episode. Mafic and ultramafic rocks are widespread in the amphibolite terrane but are almost entirely absent from the area of greenschist facies metavolcanic and metasedimentary rocks. The ultramafic rocks, predominantly serpentinite, occur as a few large bodies and many small tabular concordant bodies interleaved with the foliated rocks. The ultramafic rocks include harzburgite and d1lIlite and their serpentinized equivalents. In the Condrey Mountain quadrangle, probably more t

Geology of the Cupsuptic quadrangle, Maine

USGS Publications Warehouse

Harwood, David S.

1966-01-01

The Cupsuptic quadrangle, in west-central Maine, lies in a relatively narrow belt of pre-Silurian rocks extending from the Connecticut River valley across northern New Hampshire to north-central Maine. The Albee Formation, composed of green, purple, and black phyllite with interbedded-quartzite, is exposed in the core of a regional anticlinorium overlain to the southeast by greenstone of the Oquossoc Formation which in turn is overlain by black slate of the Kamankeag Formation. In the northern part of the quadrangle the Albee Formation is overlain by black slate, feldspathic graywacke, and minor greenstone of the Dixville Formation. The Kamankeag Formation is dated as 1-ate Middle Ordovician by graptolites (zone 12) found near the base of the unit. The Dixville Formation is correlated with the Kamankeag Formation and Oquossoc Formation and is considered to be Middle Ordovician. The Albee Formation is considered to be Middle to Lower Ordovician from correlations with similar rocks in northeastern and southwestern Vermont. The Oquossoc and Kamankeag Formations are correlated with the Amonoosuc and Partridge Formations of northern New Hampshire. The pre-Silurian rocks are unconformably overlain by unnamed rocks of Silurian age in the southeast, west-central, and northwest ninths of the quadrangle. The basal Silurian units are boulder to cobble polymict conglomerate and quartz-pebble conglomerate of late Lower Silurian (Upper Llandovery) age. The overlying rocks are either well-bedded slate and quartzite, silty limestone, or arenaceous limestone. Thearenaceous limestone contains Upper Silurian (Lower Ludlow) brachiopods. The stratified rocks have been intruded by three stocks of biotite-muscovite quartz monzonite, a large body of metadiorite and associated serpentinite, smaller bodies of gabbro, granodiorite, and intrusive felsite, as well as numerous diabase and quartz monzonite dikes. The metadiorite and serpentinite, and possibly the gabbro and granodiorite are Late Ordovician in age. The quartz monzonite is considered to be Late Devonian. Five tectonic events are inferred from the structural features in the area. The earliest was a period of folding producing tightly-appressed, northeast-trending folds in the rocks of pre-Silurian age. In the second stage the folded pre-Silurian rocks were uplifted, eroded, and truncated to produce a major unconformity between the Middle Ordovician and Lower Silurian rocks. These events constitute the Taconic orogeny. The third tectonic event was a period of folding, probably of Middle Devonian age, that warped the unconformity and overlying rocks into open, gently-plunging, east-trending folds. This period of folding undoubtedly changed the attitude of the early folds in the pre-Silurian units but it did not produce any recognizable, cross-cutting planar features in the older rocks. The fourth tectonic event was a period of igneous intrusion that locally deformed the northeast-trending folds in the pre-Silurian rocks into a macroscopic drag fold plunging at 80 degrees in a direction S.10?w. A north-trending, subvertical slip cleavage was produced locally during this period of Late Devonian (?) deformation. A period of faulting, possibly of Triassic age, dislocated some of the earlier features. The rocks are in the chlorite zone of regional metamorphism, but have been contact metamorphosed to sillimanite-bearing hornfels adjacent to the quartz monzonite stocks. The chemical changes in chlorite, biotite, garnet, cordierite, and muscovite in the chlorite, biotite, andalusite, and sillimanite zones have been-studied by optical and x-ray methods and by partial chemical analyses. The progressive changes in mineral assemblages have been graphically portrayed on quaternary diagrams and ternary projections.

Stratigraphy, geochronology, and accretionary terrane settings of two Bronson Hill arc sequences, northern New England

USGS Publications Warehouse

Moench, R.H.; Aleinikoff, J.N.

2002-01-01

The Ammonoosuc Volcanics, Partridge Formation, and the Oliverian and Highlandcroft Plutonic Suites of the Bronson Hill anticlinorium (BHA) in axial New England are widely accepted as a single Middle to Late Ordovician magmatic arc that was active during closure of Iapetus. Mapping and U-Pb dating indicate, however, that the BHA contains two volcano-sedimentary-intrusive sequences of probable opposite subduction polarity, here termed the Ammonoosuc and Quimby sequences. The Ammonoosuc sequence is defined by the Middle Ordovician Ammonoosuc Volcanics near Littleton, N.H., the type area, northeast to Milan, N.H., and Oquossoc, Me.; it also includes black slate of the Partidge Formation (C. bicornis zone graptolites, ???457 Ma). Related metamorphosed intrusive are the tonalitic Joslin Turn pluton (469 ?? 2 Ma), the Cambridge Black granitic pluton (468 ?? 3 Ma), and gabbro, tonalite (467 ?? 4 Ma), and sheeted diabase of the Chickwolnepy instructions. These intrusives cut lowermost Ammonoosuc (therefore>469 Ma). Probable uppermost Ammonoosuc is dated at 465 ?? 6 and 461 ?? 8 Ma. Successively below the Ammonoosuc are the Dead River and Hurricane Mountain Formations (flysch and melange), and the Jim Pond Formation (484 ?? 5 Ma) and Boil Mountain Complex (both ophiolite), which are structurally underlain by the Neoproterozoic(?) Chain Lakes massif. The Quimby sequence is defined by the Lower Silurian(?) to Upper Ordovician Quimby Formation, composed of bimodal volcanics (443 ?? 4 Ma) and sulfidic shale and graywacke that lie conformably to unconformably above the Ammonoosuc Volcanics and Partridge Formation. Also in the Quimby sequence are several granitic to sparsely gabbroic plutons of the Highlandcroft (441-452 Ma) and Oliverian (435-456 Ma) Plutonic Suites, which intrude the Dead River, Ammonoosuc and Partridge, but not the Quimby Formation. Based on faunal, paleolatitude, and isotropic data, the Ammonoosuc sequence and its correlative and underlying sequences formed off the southern Laurentian margin, but northwest of the principal Iapetan suture, or Red Indian line (RIL). The Boil Mountain-Jim Pond-Hurricane Mountain sequence was ramped northwestward over the Chain Lakes massif at ???475 Ma, on the basal Boil Mountain surface. This obduction probably occurred slightly before obduction on the Baie Verte-Brompton surface (BBL), farther NW, over the Laurentian margin, and was followed by Dead River flysch sedimentation, which ended with the abrupt onset of Ammonoosuc-sequence arc magmatism at ???470 Ma. Ammonoosuc eruptions probably ended at ???460 Ma, when Iapetus closed along the Red Indian line. During a following magmatic hiatus of ???3-5 m.y., now represented by portions of the Partridge Formation that overlie the Ammonoosuc Volcanics, subduction polarity reversed, and subduction resumed below the northwest-dipping Brunswick subduction complex (BSC) of New Brunswick, Canada. Quimby-sequence magmatism (???456-435 Ma) on the the newly accreted Laurentian margin occurred above the BSC, whose footwall is now buried to the southeast by mainly Silurian clastic sediments of the Merrimack-Fredericton trough, deposited in the "Fredericton Sea". In Silurian to Early Devonian time, the NW-dipping BSC footwall was paired with a SE-dipping subduction zone that produced arc magmas of the Coastal Volcanic belt, built on the composite Avalon and adjacent peri-Avalonian terranes. Orogen-normal extension produced by rapid rollback of both subduction zones narrowed the Fredericton Sea, produced the Central Maine and Connecticut Valley-Gaspe?? basins, and culminated in the Acadian orogeny when the sea completely closed in Early Devonian time. Published by Elsevier Science Ltd.

Stratigraphy, geochronology, and accretionary terrane settings of two Bronson Hill arc sequences, northern New England

USGS Publications Warehouse

Moench, R.H.; Aleinikoff, J.N.

2003-01-01

The Ammonoosuc Volcanics, Partridge Formation, and the Oliverian and Highlandcroft Plutonic Suites of the Bronson Hill anticlinorium (BHA) in axial New England are widely accepted as a single Middle to Late Ordovician magmatic arc that was active during closure of Iapetus. Mapping and U-Pb dating indicate, however, that the BHA contains two volcano-sedimentary-intrusive sequences of probable opposite subduction polarity, here termed the Ammonoosuc and Quimby sequences. The Ammonoosuc sequence is defined by the Middle Ordovician Ammonoosuc Volcanics near Littleton, NH, the type area, northeast to Milan, NH, and Oquossoc, ME; it also includes black slate of the Partridge Formation ( C. bicornis--zone graptolites, ???457 Ma). Related metamorphosed intrusives are the tonalitic Joslin Turn pluton (469 ?? 2 Ma), the Cambridge Black granitic pluton (468 ?? 3 Ma), and gabbro, tonalite (467 ?? 4 Ma), and sheeted diabase of the Chickwolnepy intrusions. These intrusives cut lowermost Ammonoosuc (therefore >469 Ma). Probable uppermost Ammonoosuc is dated at 465 ?? 6 and 461 ?? 8 Ma. Successively below the Ammonoosuc are the Dead River and Hurricane Mountain Formations (flysch and melange), and the Jim Pond Formation (484 ?? 5 Ma) and Boil Mountain Complex (both ophiolite), which are structurally underlain by the Neoproterozoic(?) Chain Lakes massif. The Quimby sequence is defined by the Lower Silurian(?) to Upper Ordovician Quimby Formation, composed of bimodal volcanics (443 ?? 4 Ma) and sulfidic shale and graywacke that lie conformably to unconformably above the Ammmonoosuc Volcanics and Partridge Formation. Also in the Quimby sequence are several granitic to sparsely gabbroic plutons of the Highlandcroft (441-452 Ma) and Oliverian (435-456 Ma) Plutonic Suites, which intrude the Dead River, Ammonoouc and Partridge, but not the Quimby Formation. Based on faunal, paleolatitude, and isotopic data, the Ammonoosuc sequence and its correlatives and underlying sequences formed off the southern Laurentian margin, but northwest of the principal Iapetan suture, or Red Indian line. The Boil Mountain-Jim Pond-Hurricane Mountain sequence was ramped northwestward over the Chain Lakes massif at ???475 Ma, on the basal Boil Mountain surface. This obduction probably occurred slightly before obduction on the Baie Vert-Brompton surface (BBL), farther NW, over the Laurentian margin, and was followed by Dead River flysch sedimentation, which ended with the abrupt onset of Ammonoosuc-sequence arc magmatism at ???470 Ma. Ammonoosuc eruptions probably ended at ???460 Ma, when Iapetus closed along the Red Indian line. During a following magmatic hiatus of ???3-5 m.y., now represented by portions of the Partridge Formation that overlie the Ammonoosuc Volcanics, subduction polarity reversed, and subduction resumed below the northwest-dipping Brunswick subduction complex (BSC) of New Brunswick, Canada. Quimby-sequence magmatism (???456-435 Ma) on the newly accreted Laurentian margin occurred above the BSC, whose footwall is now buried to the southeast by mainly Silurian clastic sediments of the Merrimack-Fredericton trough, deposited in the "Fredericton Sea". In Silurian to Early Devonian time, the NW-dipping BSC footwall was paired with a SE-dipping subduction zone that produced arc magmas of the Coastal Volcanic belt, built on the composite Avalon and adjacent peri-Avalonian terranes. Orogen-normal extension produced by rapid rollback of both subduction zones narrowed the Fredericton Sea, produced the Central Maine and Connecticut Valley-Gaspe?? basins, and culminated in the Acadian orogeny when the sea completely closed in Early Devonian time. Published by Elsevier Science Ltd.

Geomorphology of New England

USGS Publications Warehouse

Denny, C.S.

1982-01-01

Widely scattered terrestrial deposits of Cretaceous or Tertiary age and extensive nearshore and fluvial Coastal Plain deposits now largely beneath the sea indicate that the New England region has been above sea level during and since the Late Cretaceous. Estimates of rates of erosion based on sediment load in rivers and on volume of sediments in the Coastal Plain suggest that if the New England highlands had not been uplifted in the Miocene, the area would now be largely a lowland. If the estimated rates of erosion and uplift are of the right order of magnitude, then it is extremely unlikely that any part of the present landscape dates back before Miocene time. The only exception would be lowlands eroded in the early Mesozoic, later buried beneath Mesozoic and Cenozoic deposits, and exhumed by stream and glacial erosion during the later Cenozoic. Many of the rocks in the New England highlands are similar to those that underlie the Piedmont province in the central and southern Appalachians, where the relief over large areas is much less than in the highlands of New England. These comparisons suggest that the New England highlands have been upwarped in late Cenozoic time. The uplift took place in the Miocene and may have continued into the Quaternary. The New England landscape is primarily controlled by the underlying bedrock. Erosion and deposition during the Quaternary, related in large part to glaciation, have produced only minor changes in drainage and in topography. Shale and graywacke of Ordovician, Cambrian, and Proterozoic age forming the Taconic highlands, and akalic plutonic rocks of Mesozoic age are all highland makers. Sandstone and shale of Jurassic and Triassic age, similar rocks of Carboniferous age, and dolomite, limestone, and shale of Ordovician and Cambrian age commonly underlie lowlands. High-grade metapelites are more resistant than similar schists of low metamorphic grade and form the highest mountains in New England. Feldspathic rocks tend to form lowlands. Alkalic plutonic rocks of Mesozoic age underlie a large area in the White Mountains of New Hampshire and doubtless are a factor in their location and relief. Where the major streams flow across the regional structure of the bedrock, the location of the crossings probably is related to some other characteristic of the bedrock, such as joints or cross faults. The course of the Connecticut River is the result of the adjustment of the drainage to the bedrock geology during a long period of time. There is no ready explanation why many of the large rivers do not cross areas of calcalkalic plutonic rock, but rather take a longer course around such areas, which tend to include segments of the divide between the streams. The presence of coarse clastic materials in Miocene rocks of the emerged Coastal Plain of the Middle Atlantic States suggests uplift of the adjacent Piedmont and of the Adirondack Mountains at that time. The Miocene rocks of the submerged Coastal Plain in the Gulf of Maine and south of New England are fine grained and contain only small amounts of fluvial gravel. Perhaps the coarse clastic materials shed by the New England highlands in late Cenozoic time are buried by or incorporated in the Pleistocene glacial deposits.

Stratigraphy, geochronology, and accretionary terrane settings of two Bronson Hill arc sequences, northern New England

NASA Astrophysics Data System (ADS)

Moench, Robert H.; Aleinikoff, John N.

The Ammonoosuc Volcanics, Partridge Formation, and the Oliverian and Highlandcroft Plutonic Suites of the Bronson Hill anticlinorium (BHA) in axial New England are widely accepted as a single Middle to Late Ordovician magmatic arc that was active during closure of Iapetus. Mapping and U-Pb dating indicate, however, that the BHA contains two volcano-sedimentary-intrusive sequences of probable opposite subduction polarity, here termed the Ammonoosuc and Quimby sequences. The Ammonoosuc sequence is defined by the Middle Ordovician Ammonoosuc Volcanics near Littleton, NH, the type area, northeast to Milan, NH, and Oquossoc, ME; it also includes black slate of the Partridge Formation ( C. bicornis--zone graptolites, ∼457 Ma). Related metamorphosed intrusives are the tonalitic Joslin Turn pluton (469 ± 2 Ma), the Cambridge Black granitic pluton (468 ± 3 Ma), and gabbro, tonalite (467 ± 4 Ma), and sheeted diabase of the Chickwolnepy intrusions. These intrusives cut lowermost Ammonoosuc (therefore >469 Ma). Probable uppermost Ammonoosuc is dated at 465 ± 6 and 461 ± 8 Ma. Successively below the Ammonoosuc are the Dead River and Hurricane Mountain Formations (flysch and melange), and the Jim Pond Formation (484 ± 5 Ma) and Boil Mountain Complex (both ophiolite), which are structurally underlain by the Neoproterozoic(?) Chain Lakes massif. The Quimby sequence is defined by the Lower Silurian(?) to Upper Ordovician Quimby Formation, composed of bimodal volcanics (443 ± 4 Ma) and sulfidic shale and graywacke that lie conformably to unconformably above the Ammmonoosuc Volcanics and Partridge Formation. Also in the Quimby sequence are several granitic to sparsely gabbroic plutons of the Highlandcroft (441-452 Ma) and Oliverian (435-456 Ma) Plutonic Suites, which intrude the Dead River, Ammonoouc and Partridge, but not the Quimby Formation. Based on faunal, paleolatitude, and isotopic data, the Ammonoosuc sequence and its correlatives and underlying sequences formed off the southern Laurentian margin, but northwest of the principal Iapetan suture, or Red Indian line. The Boil Mountain-Jim Pond-Hurricane Mountain sequence was ramped northwestward over the Chain Lakes massif at ∼475 Ma, on the basal Boil Mountain surface. This obduction probably occurred slightly before obduction on the Baie Vert-Brompton surface (BBL), farther NW, over the Laurentian margin, and was followed by Dead River flysch sedimentation, which ended with the abrupt onset of Ammonoosuc-sequence arc magmatism at ∼470 Ma. Ammonoosuc eruptions probably ended at ∼460 Ma, when Iapetus closed along the Red Indian line. During a following magmatic hiatus of ∼3-5 m.y., now represented by portions of the Partridge Formation that overlie the Ammonoosuc Volcanics, subduction polarity reversed, and subduction resumed below the northwest-dipping Brunswick subduction complex (BSC) of New Brunswick, Canada. Quimby-sequence magmatism (∼456-435 Ma) on the newly accreted Laurentian margin occurred above the BSC, whose footwall is now buried to the southeast by mainly Silurian clastic sediments of the Merrimack-Fredericton trough, deposited in the “Fredericton Sea”. In Silurian to Early Devonian time, the NW-dipping BSC footwall was paired with a SE-dipping subduction zone that produced arc magmas of the Coastal Volcanic belt, built on the composite Avalon and adjacent peri-Avalonian terranes. Orogen-normal extension produced by rapid rollback of both subduction zones narrowed the Fredericton Sea, produced the Central Maine and Connecticut Valley-Gaspé basins, and culminated in the Acadian orogeny when the sea completely closed in Early Devonian time.

Microbanded manganese formations; protoliths in the Franciscan Complex, California

USGS Publications Warehouse

Huebner, J. Stephen; Flohr, Marta J.

1990-01-01

The Buckeye manganese deposit, 93 km southeast of San Francisco in the California Coast Ranges, preserves a geologic history that provides clues to the origin of numerous lenses of manganese carbonate, oxides, and silicates that occur with interbedded radiolarian chert and metashale of the Franciscan Complex. Compositionally and mineralogically laminated Mn-rich protoliths were deformed and dismembered, in a manner that mimics in smaller scale the deformation of the host complex, and then were incipiently metamorphosed at blueschistfacies conditions. Eight phases occur as almost monomineralic protoliths and mixtures: rhodochrosite, caryopilite, chlorite, gageite, taneyamalite, braunite, hausmannite, and laminated chert (quartz). Braunite, gageite, and some chlorite and caryopilite layers were deposited as gel-like materials; rhodochrosite, most caryopilite, and at least some hausmannite layers as lutites; and the chert as turbidites of radiolarian sand. Some gel-like materials are now preserved as transparent, sensibly isotropic relics of materials that fractured or shattered when deformed, creating curved surfaces. In contrast, the micrites flowed between the fragments of gel-like materials. The orebody and most of its constituent minerals have unusually Mn-rich compositions that are described by the system MnO-SiO2-O2-CO2-H2O. High values of Mn/Fe and U/Th, and low concentrations of Co, Cu, and Ni, distinguish the Buckeye deposit from many high-temperature hydrothermal deposits and hydrogenous or diagenetic manganese and ferromanganese nodules and pavements. This chemical signature suggests that ore deposition was related to fluids from the sediment column and seawater. Tungsten is associated exclusively with gageite, in concentrations as high as 80 parts per million. The source of the manganese is unknown; because basalts do not occur near the deposit, it was probably manganese leached from the sediment column by reducing solutions. Low concentrations of calcium (CaO approximately 0.6 weight percent) suggest that the host sediments formed beneath the carbonate-compensation depth. The most probable cause of the microbanding is changing proportions of chemical fluxes supplied to the sediment-seawater interface. The principal fluxes were biogenic silica from the water column, carbon dioxide from organic matter in the sediment column, O2 and other seawater constituents, and Mn +2-bearing fluid. The presence of Al2O3 and TiO2 (supplied by a detrital flux) in the metashale but not the ore lens suggests rapid ore deposition. Material supply-rate changes were probably due to a complex combination of episodic variations in the hydrothermal flux and periodic flows of radiolarian sand (silica and CO2 fluxes) that may be related to climate variations. The processes that form recent marine hydrothermal mounds may be the same as processes that formed the Buckeye deposit. Features common to both include the presence of Mn-oxyhydroxide crusts (corresponding to the Buckeye orebody), a large Mn/Fe ratio, low abundances of most minor elements, and small size. The most important differences are the absence of rhodochrosite and manganese silicates, interlayered with oxide, and the absence of adjacent chert in the contemporary deposits. These differences may be due to an absence of the debris of siliceous pelagic organisms, which accumulated in the Buckeye paleoenvironment. Periodic turbidity flows of chert-forming radiolarian sand could provide the changes in the fluxes of silica and organic matter necessary to form manganese carbonate and silicates. Turbidity flows of graywacke indicate proximity to an environment with high relief. A possible paleodepositional environment is an oceanic spreading center approaching a continental margin at which subduction occurred.

Stratigraphy, geochronology, and accretionary terrane settings of two Bronson Hill arc sequences, northern New England

NASA Astrophysics Data System (ADS)

Moench, Robert H.; Aleinikoff, John N.

2002-01-01

The Ammonoosuc Volcanics, Partridge Formation, and the Oliverian and Highlandcroft Plutonic Suites of the Bronson Hill anticlinorium (BHA) in axial New England are widely accepted as a single Middle to Late Ordovician magmatic arc that was active during closure of Iapetus. Mapping and U-Pb dating indicate, however, that the BHA contains two volcano-sedimentary-intrusive sequences of probable opposite subduction polarity, here termed the Ammonoosuc and Quimby sequences. The Ammonoosuc sequence is defined by the Middle Ordovician Ammonoosuc Volcanics near Littleton, N.H., the type area, northeast to Milan, N.H., and Oquossoc, Me.; it also includes black slate of the Partidge Formation ( C. bicornis zone graptolites, ∼457 Ma). Related metamorphosed intrusive are the tonalitic Joslin Turn pluton (469±2 Ma), the Cambridge Black granitic pluton (468±3 Ma), and gabbro, tonalite (467±4 Ma), and sheeted diabase of the Chickwolnepy instructions. These intrusives cut lowermost Ammonoosuc (therefore >469 Ma). Probable uppermost Ammonoosuc is dated at 465±6 and 461±8 Ma. Successively below the Ammonoosuc are the Dead River and Hurricane Mountain Formations (flysch and melange), and the Jim Pond Formation (484±5 Ma) and Boil Mountain Complex (both ophiolite), which are structurally underlain by the Neoproterozoic(?) Chain Lakes massif. The Quimby sequence is defined by the Lower Silurian(?) to Upper Ordovician Quimby Formation, composed of bimodal volcanics (443±4 Ma) and sulfidic shale and graywacke that lie conformably to unconformably above the Ammonoosuc Volcanics and Partridge Formation. Also in the Quimby sequence are several granitic to sparsely gabbroic plutons of the Highlandcroft (441-452 Ma) and Oliverian (435-456 Ma) Plutonic Suites, which intrude the Dead River, Ammonoosuc and Partridge, but not the Quimby Formation. Based on faunal, paleolatitude, and isotropic data, the Ammonoosuc sequence and its correlative and underlying sequences formed off the southern Laurentian margin, but northwest of the principal Iapetan suture, or Red Indian line (RIL). The Boil Mountain-Jim Pond-Hurricane Mountain sequence was ramped northwestward over the Chain Lakes massif at ∼475 Ma, on the basal Boil Mountain surface. This obduction probably occurred slightly before obduction on the Baie Verte-Brompton surface (BBL), farther NW, over the Laurentian margin, and was followed by Dead River flysch sedimentation, which ended with the abrupt onset of Ammonoosuc-sequence arc magmatism at ∼470 Ma. Ammonoosuc eruptions probably ended at ∼460 Ma, when Iapetus closed along the Red Indian line. During a following magmatic hiatus of ∼3-5 m.y., now represented by portions of the Partridge Formation that overlie the Ammonoosuc Volcanics, subduction polarity reversed, and subduction resumed below the northwest-dipping Brunswick subduction complex (BSC) of New Brunswick, Canada. Quimby-sequence magmatism (∼456-435 Ma) on the the newly accreted Laurentian margin occurred above the BSC, whose footwall is now buried to the southeast by mainly Silurian clastic sediments of the Merrimack-Fredericton trough, deposited in the “Fredericton Sea”. In Silurian to Early Devonian time, the NW-dipping BSC footwall was paired with a SE-dipping subduction zone that produced arc magmas of the Coastal Volcanic belt, built on the composite Avalon and adjacent peri-Avalonian terranes. Orogen-normal extension produced by rapid rollback of both subduction zones narrowed the Fredericton Sea, produced the Central Maine and Connecticut Valley-Gaspé basins, and culminated in the Acadian orogeny when the sea completely closed in Early Devonian time.

Reconnaissance engineering geology of the Petersburg area, southeastern Alaska, with emphasis on geologic hazards

USGS Publications Warehouse

Yehle, Lynn A.

1978-01-01

A program to study the engineering geology of most larger Alaska coastal communities and to evaluate their earthquake and other geologic hazards was started following the 1964 Alaska earthquake; this report about the Petersburg area is a product of that program. Field-study methods were of a reconnaissance nature, and thus, interpretations in the report are tentative. Landscape of the northern end of Mitkof Island on which Petersburg is situated is characterized by a gently sloping, muskeg-covered terrain, with altitudes mostly less than 30 m. In contrast, much of the rest of the island is composed of mountainous terrain with many steep valleys. During the Pleistocene Epoch, the Petersburg area presumably was covered by ice several times; glaciers deeply eroded many valleys on Mitkof Island and adjacent areas. The last major deglaciation probably was largely completed by 12,000 years ago. Delayed rebound of the earth's crust, after the melting of large amounts of ice, permitted extensive inundation of land in the Petersburg area. Subsequently, emergence has elevated marine deposits to a present-day altitude of at least 65 m and probably to 75 m. Bedrock in the Petersburg map area is composed of relatively hard metamorphic rocks, chiefly phyllite and probably some graywacke. Rocks are of Middle(?) Jurassic to Early Cretaceous age. Five types of surficial geologic material of Quaternary age were recognized: (1) mixed deposits consisting of diamicton, silt-clay, and sand or sandy pebble gravel, (2) alluvial deposits, (3) shore and delta deposits, (4) organic deposits, and (5) artificial fill. Geologic structure in southeastern Alaska is complex because several cycles of tectonic deformation since at least early Paelozoic time have affected different parts of the region. The latest of the major tectonic events in southeastern Alaska occurred in Tertiary time, with some minor activity continuing into the Quaternary Period. Along the outer coast of southeastern Alaska, active strike-slip movement is occurring along the Chichagof-Baranof and Queen Charlotte faults. A segment of the prominent Coast-Range lineament, part of which may be a fault, lies 18 km northeast of Petersburg. Many earthquakes occur along the outer coast of southeastern Alaska. Most of these shocks are associated with movements along the Chichagof-Baranof, Queen Charlotte, and Transition faults. A few small earthquakes occur in the region between the outer coast and the southern part of the Coast Mountains. 0nly a few earthquakes have been recorded as felt at Petersburg; these shocks and others possibly felt in the Petersburg region are tabulated. Among the recorded earthquakes the highest intensity (about V-VI) as the magnitude 7.1 earthquake of October 24, 1927, that occurred probably along the Chichagof-Baranof fault, and about 225 km northwest of Petersburg; damage was reported as minor. Other large earthquakes along the Chichagof-Baranof fault that affected or probably affected the Petersburg area in a minor way occurred on August 22, 1949 (magnitude 8.1) and on July 30, 1972 (magnitude 7.25). From a consideration of the tectonics and earthquake history of the region, earthquakes similar to the 1927, 1949, and 1972 shocks are expected to recur on segments of the Chichagof-Baranof or Queen Charlotte faults. The closest of these fault segments is about 170 km southwest from Petersburg. The likelihood of destructive earthquakes being generated along faults closer to Petersburg is unknown. A very generalized discussion of possible geologic effects that could occur in the area during a postulated, theoretically reasonable worst case earthquake of magnitude 8 occurring along the outer coast about 170 km southwest from Petersburg notes that ground shaking probably would be strongest on organic deposits and least on bedrock and on firm, compact diamicton. Among other effects that could happen are: (1) liquefaction of some of the few delta and alluvial

Bedrock Geology and Asbestos Deposits of the Upper Missisquoi Valley and Vicinity, Vermont

USGS Publications Warehouse

Cady, Wallace Martin; Albee, Arden Leroy; Chidester, A.H.

1963-01-01

The upper Missisquoi Valley and vicinity as described in this report covers an area of about 250 square miles at the headwaters of the Missisquoi River in north-central Vermont. About 90 percent of the area is forested and the remainder is chiefly farm land. The topography reflects the geologic structure and varied resistance of the bedrock to erosion. Most of the area is on the east limb of the Green Mountain anticlinorium, which is the principal structural feature of Vermont. The bedrock is predominantly sedimentary and volcanic rock that has been regionally metamorphosed. It was intruded before metamorphism by mafic and ultramafic igneous rocks, and after metamorphism by felsic and mafic igneous rocks. The metamorphosed sedimentary and volcanic rocks range in age from Cambrian(?) to Middle Silurian, the intrusive igneous rocks from probably Late Ordovician to probably late Permian. Metamorphism and principal folding in the region occurred in Middle Devonian time. The metamorphosed sedimentary and volcanic rocks make up a section at least 25,000 feet thick and can be divided into nine formations. The Hazens Notch formation of Cambrian(?) and Early Cambrian age is characterized by carbonaceous schist. It is succeeded in western parts of the area by the Jay Peak formation of Early Cambrian age, which is chiefly a schist that is distinguished by the general absence of carbonaceous zones; in central parts of the area the Hazens Notch formation is followed by the Belvidere Mountain amphibolite, probably the youngest of the formations of Early Cambrian age. The Ottauquechee formation, composed of carbonaceous phyllite and quartzite, and phyllitic graywacke, is of Middle Cambrian age. The Stowe formation of Late Cambrian(?) and Early(?) Ordovician age overlies the Ottauquechee and is predominantly noncarbonaceous schist, though it also contains greenstone and carbonaceous schist and phyllite. The Umbrella Hill formation of Middle Ordovician age is characteristically a conglomerate in which the mineral chloritoid is common. The overlying Moretown formation, also of Middle Ordovician age, contains granulite and slate, also greenstone and amphibolite of the Coburn Hill volcanic member. The Shaw Mountain formation, made up of conglomerate, phyllite, and limestone, is the oldest Silurian unit. The Shaw Mountain formation is succeeded by the Northfield slate of Middle Silurian age. The igneous rocks of the region include various ultramafic plutonic rocks, such as dunite, peridotite, and serpentinite, probably of Late Ordovician age; sills and nearly concordant dikes of metagabbro of Late Ordovician age; biotite granite plutons or Middle or Late Devonian age, most notably on Eltey Mountain; and hypabyssallamprophyre, probably of late Permian age. Metamorphic zoning is shown by the distribution of rocks of the epidote-amphibolite facies and the greenschist facies in and near the Green Mountains, and near Coburn Hill and Eltey Mountain. Metasomatism related to regional metamorphism has produced porphyroblasts and quartz segregations in the sedimentary and volcanic rocks, and steatitization and carbonatization of serpentinite. Contact metamorphism has formed rocks of the epidote-amphibolite facies near granite plutons, and probably calc-silicate rock at the contacts of ultramafic plutons. The axial anticline of the Green Mountain anticlinorium and other anticlines and synclines to the east are the major longitudinal structural features of the area. These structures are complicated by transverse folds, particularly a syncline in the vicinity of Tillotson Peak. Early minor cross folds that are best developed in the Hazens Notch formation are believed to be genetically related to the transverse folds. The axial planes of the cross folds are folded about the axes of the later longitudinal folds of the Green Mountain anticlinorium. The longitudinal and transverse fold systems probably formed in the same episode of defor

Geology of the Plumtree area, Spruce Pine district, North Carolina

USGS Publications Warehouse

Brobst, Donald Albert

1953-01-01

This report describes the results of study and geologic mapping (1:12,000) in the 70-square-mile Plumtree area in the northeastern part of the Spruce Pine pegmatite district, on the Blue Ridge upland in western North Carolina. The district has been the chief domestic source of feldspar and sheet mica. The mining belt just west of the Blue Ridge Front trends northeast and is 25 miles long and 10 miles wide. The center of the Plumtree area lies 10 miles northeast of Spruce Pine pegmatite district, on the Blue Ridge upland in western North Carolina. The district has been the chief domestic source of feldspar and sheet mica. The mining belt just west of the Blue Ridge Front trends northeast and is 25 miles long and 10 miles wide. The center of the Plumtree area lies 10 miles northeast of Spruce Pine and includes parts of Mitchell and Avery Counties shown on the portions of the 7.5-minute Spruce Pine, Linville Falls, Newland, North Carolina, and Carvers Gap, North Carolina and Tennessee quadrangle. The topography varies from rugged mountains to rounded or flat topped hills near the entrenched, meandering master streams. Old erosion surfaces are approximately 600,1,100, 1,500, and 2,500 feet above the present master stream level. The area is in late youth or early maturity after rejuvenation.. The regionally metamorphosed rocks of the amophibolite facies form three mappable units: mica gneiss, mica schist, and hornblende rock. These rocks, perhaps of Precambrian age, are intimately interlayered with thicknesses of the individual layers ranging from less than one inch to several tons of feet. Field relationships and chemical data suggest that the mica (Carolina-type) rocks were derived from sandstones, graywackes, and shales and that the hornblende-rich (Roan-type) layers were derived from impure carbonate rocks. The igneous rocks include alaskite and associated pegmatite of early Paleozoic age (?), dunite and associated soapstone of a prepegmatite age, and a few diabasic dikes of post-pegmatite age (Triassic?). The alaskite and pegmatite have similar bulk compositions, notably low in iron (0.3 percent). The major constituents in order of decreasing abundance are plagioclase, perthitic microcline, quartz, and muncovite. All of these minerals, as well as clay deposits derived from the weathering of alaskite under old terraces, have economic value. The zoned pegmatites contain fewer zones which are less complex mineralogically than those in the pegmatites of many other areas. These essentially unmetamorphosed bodies were intruded approximately at the peak of the regional metamorphism. Their emplacement was controlled by local structure and rock type. The source of this igneous material may have been the mobilized portions of the Cranberry gneiss which underlies the area. The dunite bodies were intruded early in the metamorphic cycle. The bodies are commonly zoned: from the wall rock inwards (1) talc-antrophyllite-serpentine fringe, (3) serpentinized dunite, (3) granular olivine core. Dunite, chromite, vermiculite, and anthophyllite are the major economic commodities. Extensive hydrothermal alteration of dunite bodies produced soapstone. The area is the northeast end of a southwest plunging synclinorium about 20 miles wide with the steeper limb on the northwest side. There are three structural zones: zone I on the northwest is characterized by the northeast-trending isoclinal folds with steep southeast dips; zone II on the southwest includes an area of rocks with low and variable dip; zone III is the complex central core. In the extreme northeast zones I and II have an indistinct boundary where they coalesce along the rim of the synclinorium. Six stratigraphic units are exposed totaling approximately 10,500 feet of metamorphic rocks. Small scale structural features include a foliation, and a lineation in the planes of the foliation. Minor folding reflects the trends of the major structures. There are randomly orient

The Alaskan Mineral Resource Assessment Program; background information to accompany folio of geologic and mineral resource maps of the Circle quadrangle, Alaska

USGS Publications Warehouse

Foster, Helen Laura; Menzie, W.D.; Cady, J.W.; Simpson, S.L.; Aleinikoff, J.N.; Wilson, Frederic H.; Tripp, R.B.

1987-01-01

The geology, geochemistry, geophysics, and Landsat imagery of the Circle quadrangle were investigated by an interdisciplinary research team for the purpose of assessing the mineral potential of the area. The quadrangle covers approximately 15,765 km2 in east-central Alaska; most of it is included in the mountainous Yukon-Tanana Upland physiographic division, but the northernmost part is in the low-lying Yukon Flats section. The Circle mining district, in the east-central part of the quadrangle, has been a major producing area of placer gold since its discovery in 1893. For descriptive purposes, the Circle quadrangle is divided into three areas: the northwest Circle quadrangle, the area north of the Tintina fault zone, and the area south of the Tintina fault zone. The Tintina fault zone extends northwesterly through the northern part of the quadrangle. The northwest Circle quadrangle contains mostly folded and faulted, slightly metamorphosed sedimentary rocks that are intruded by Tertiary granitic plutons. In the northern part of the area north of the Tintina fault zone (Little Crazy Mountains and northern east Crazy Mountains), the rocks consist primarily of the gabbro and basalt of the Circle Volcanics and minor associated chert, graywacke, and limestone. Elsewhere in this area (south of the Circle Volcanics and in the western Crazy Mountains), the rocks are mostly slightly metamorphosed Paleozoic sedimentary rocks that have been folded and faulted. Rocks in the largest part of the quadrangle, the area south of the Tintina fault zone, consist largely of pelitic rocks that are regionally metamorphosed to greenschist and amphibolite facies. Felsic plutons, mostly Tertiary in age, occur throughout the area. The metamorphic rocks are separated from sedimentary rocks on the northwest by thrust faulting. The aeromagnetic and gravity data show clear differences between the areas north and south of the Tintina fault zone. The metamorphic terrane to the south has low overall gravity and local gravity lows over exposed granitic plutons. It is hypothesized that magnetic chlorite schist infolded with nonmagnetic quartzite and schist account for east-northeast-trending magnetic highs that approximately parallel the regional strike of the most prominent foliation in the metamorphic rocks. North of the Tintina fault zone, the Circle Volcanics are characterized by high gravity and east-west-trending magnetic highs. The Tintina fault zone has an intense magnetic high near the western margin of the Circle quadrangle overlying the magnetic granodiorite of the Victoria Mountain pluton. A magnetic high near Circle Hot Springs is less intense, but broader, and could reflect a buried magnetic pluton similar to that of the Victoria Mountain pluton. Computer-enhanced Landsat images of the Circle quadrangle show trends and patterns of concentrations of linear features. Features trending northeast-southwest predominate throughout the quadrangle; northwest-southeast-trending linear features are found mostly south of the Tintina fault zone. High concentrations of linear features were not found to correspond to areas of known mineralization in any consistent or significant way that could presently be used in locating areas of mineralization. Geochemical and mineralogical studies of stream sediment and heavy-mineral concentrates from the Circle quadrangle identify areas of anomalous concentrations of metallic elements, including gold, silver, tin, tungsten, lead, antimony, zinc, thorium, uranium, and beryllium. The data delineate areas of known mineral occurrences and areas that may contain undiscovered mineral resources. To date, placer gold has been the only significant metallic mineral resource from the Circle quadrangle, but the general geologic setting, especially the presence of post-orogenic plutons, is similar to that of regions that contain tin greisen deposits, tungsten skarn deposits, lode gold deposits in metasedimentary roc

Geology of the Aspen 15-minute quadrangle, Pitkin and Gunnison counties, Colorado

USGS Publications Warehouse

Bryant, Bruce

1979-01-01

The Aspen area, located 170 km southwest of Denver, Colo., lies at the intersection of the northeast-trending Colorado mineral belt and the west margin of the north-trending Sawatch uplift of Laramide age; it is within the southwest part of the northwest-trending late Paleozoic Eagle basin. Precambrian shales and graywackes, perhaps as old as 2 billion years (b.y.), were converted to sillimanite-bearing gneiss and muscovite-biotite schist 1.65-1.70 b.y. ago. They were deformed into northeast-plunging folds and were migmatized, and they were intruded by quartz diorite, porphyritic quartz monzonite, and granite. Muscovite-biotite quartz monzonite intruded this older Precambrian terrane about 1.45 b.y. ago and is the predominant Precambrian rock near Aspen. Uplift, some faulting, and much erosion occurred during the 900-million year (m.y.) interval between emplacement of the plutonic rocks and deposition of Upper Cambrian sediments. From Late Cambrian through Mississippian the region was part of a broad area alternately covered by shallow seas or occupied by low-lying land. Quartzite, dolomite, and limestone 200-320 m thick, comprising the Sawatch Quartzite and Peerless Formation (Cambrian), Manitou Dolomite (Ordovician), Chaffee Group (Mississippian(?) and Devonian), and Leadville Limestone (Mississippian) were deposited during this interval. After an hiatus during which soil formation and solution of the Leadville Limestone took place in the Late Mississippian, a thick sequence of marine and nonmarine clastic rocks was deposited in the newly developing Eagle basin during the late Paleozoic and early Mesozoic. Deposition of about 300 m of carbonaceous shale, limestone, dolomite, and minor siltstone and evaporite of the Belden Formation began in a shallow sea in Early and Middle Pennsylvanian time. Facies relations indicate that the northwest-trending Uncompahgre uplift southwest of Aspen, if present at that time, had very low relief. The overlying Middle Pennsylvanian Gothic Formation of Langenheim (1952) contains calcareous sandstone, siltstone, shale, limestone, and evaporite. Its clastic debris, significantly coarser than that in the Belden, signals the initial rise of the Uncompahgre uplift bordering the Eagle basin on the southwest; the Gothic here lacks the conglomerates and fossiliferous marine limestones found closer to the uplift. Red terrigenous clastic rocks and minor limestone and evaporite of the Maroon Formation as much as 3,200 m thick, deposited mainly in a fluvial flood-plain environment during the rest of the Pennsylvanian and the Early Permian, indicate withdrawal of the sea caused by further uplift of the Uncompahgre highland. Following an hiatus accompanied by local folding, the red conglomerate, sandstone, and siltstone of the State Bridge Formation (Late Permian and Early Triassic) was deposited in a fluvial-lacustrine environment adjacent to a much-expanded Uncompahgre uplift; a significant part of the State Bridge is material recycled from the Maroon Formation exposed to erosion on the flank of the uplift. The State Bridge, absent towards the south, becomes thicker and finer grained towards the north. The Chinle Formation (Late Triassic) rests with angular unconformity on the State Bridge Formation. The Chinle contains a basal discontinuous quartz-pebble conglomerate (Gartra Member) and is chiefly calcareous siltstone and limestone, with some beds of sandstone and conglomerate composed of fragments derived from the limestone beds. The Chinle was deposited on flood plains and in lakes by streams. Storms may have disrupted the sediments in the lakes producing the limestone pebble conglomerates. The lack of feldspar in the Chinle indicates that the nearby part of the Uncompahgre uplift was not a sediment source, or was covered by a deeply weathered feldspar-free mantle. The formation, absent towards the south, thickens toward the north. Thicknesses of the Maroon, State Bridge, and Ch

Detrital zircon geochronology of some neoproterozoic to triassic rocks in interior alaska

USGS Publications Warehouse

Bradley, D.C.; McClelland, W.C.; Wooden, J.L.; Till, A.B.; Roeske, S.M.; Miller, M.L.; Karl, Susan M.; Abbott, J.G.

2007-01-01

We report 777 U-Pb SHRIMP detrital zircon ages from thirteen sandstones and metasandstones in interior Alaska. About sixty grains per sample were analyzed; typically, half to three-fourths of these were concordant within ?? 10%. Farewell terrane. Two quartzites were collected from Ruby quadrangle and a third from Taylor Mountains quadrangle. All three are interpreted to represent a low stratigraphic level in the Nixon Fork platform succession; the samples from Ruby quadrangle are probably late Neoproterozoic, and the sample from Taylor Mountains quadrangle is probably Cambrian in age. The youngest detrital zircon in any of the three is 851 Ma. The two Ruby quadrangle samples area almost identical: one has a major age cluster at 1980-2087 and minor age clusters at 944-974 and 1366-1383 Ma; the other has a major age cluster at 1993-2095 Ma and minor age clusters at 912-946 and 1366-1395 Ma. The Taylor Mountains sample shows one dominant peak at 1914-2057 Ma. Notably absent are zircons in the range 1800-1900 Ma, which are typical of North American sources. The detrital zircon populations are consistent with paleontological evidence for a peri- Siberian position of the Farewell terrane during the early Paleozoic. Mystic subterrane of the Farewell terrane. Three graywackes from flysch of the Mystic subterrane, Talkeetna quadrangle, were sampled with the expectation that all three were Pennsylvanian. Asample from Pingston Creek is Triassic (as revealed by an interbedded ash dated at ca. 223 Ma) and is dominated by age clusters of 341-359 and 1804-1866 Ma, both consistent with a sediment source in the Yukon-Tanana terrane. Minor age clusters at 848-869 and 1992-2018 Ma could have been sourced in the older part of the Farewell terrane. Still other minor age clusters at 432-461, 620-657, 1509-1536, and 1627-1653 Ma are not readily linked to sources that are now nearby. Asample from Surprise Glacier is mid-Mississippian or younger. Adominant age cluster at 1855-1883 and a minor one at 361-367 Ma could have been sourced in the Yukon-Tanana terrane. Other age clusters at 335-336, 457-472, 510-583, and 1902-1930 have no obvious nearby source. A sample from Ripsnorter Creek is Silurian or younger. The dominant age cluster at 937-981 Ma and a minor one at 2047-2077 Ma could have been sourced in the Farewell terrane. Minor age clusters at 1885-1900 and 2719-2770 Ma could have been sourced in the Yukon-Tanana terrane. Other age clusters at 429 490, 524-555, 644-652, 1023-1057, 1131-1185, and 1436-1445 Ma have no obvious nearby source. The so-called Mystic subterrane is structurally complex and would appear to include more than one Phanerozoic turbidite succession; more mapping and detrital zircon geochronology are needed. Wickersham and Yukon-Tanana terranes. A grit from Wickersham terrane in Tanana quadrangle and a grit from Yukon-Tanana terrane in Talkeetna quadrangle have similar, exclusively Precambrian detrital zircon populations, supporting previous correlations. The Wickersham sample has major age clusters at 1776-1851 and 1930-1964 Ma, and the youngest grain is 1198 Ma. The Yukon-Tanana grit has a major age cluster at 1834-1867 Ma, and the youngest grain is 1789 Ma. A North American source has been previously proposed, and this seems likely based on detrital zircon data. Ruby terrane and Minook Complex. Detrital zircons from quartzites in the Ruby terrane show two quite different age patterns. Asample from the Bear Creek area of Tanana quadrangle has detrital zircon ages that are similar to those from the Wickersham and Yukon-Tanana grits. The dominant age clusters are 1823-1856 and 1887-1931 Ma. In contrast, a quartzite from nearby Senatis Mountain (Tanana quadrangle) yielded a completely different detrital zircon age spectrum, featuring a broad peak with no significant gaps from 1024 to 1499 Ma and a minor age cluster at 1671-1695 Ma. The youngest concordant zircon is 1024 ?? 6 Ma. Aquartzite from the Minook Complex, a sliver along t

Late Proterozoic island-arc complexes and tectonic belts in the southern part of the Arabian Shield, Kingdom of Saudi Arabia

USGS Publications Warehouse

Greenwood, William R.; Stoeser, D.B.; Fleck, R.J.; Stacey, J.S.

1983-01-01

Two main subdivisions of layered rocks are recognized in the southern Arabian Shield south of lat 22? N. These are an older ensimatic-arc complex, which formed 1100-800 m.y. ago, and a younger marginal-arc complex, which formed 800-690 m.y. ago. The older ensimatic-arc complex, located in the southwestern part of the Shield, includes graywacke and mafic to intermediate volcanic rocks of the essentially contemporaneous Baish, Bahah, and Jiddah groups. Although the younger arc complex is also dominantly ensimatic in character, it is also partly superimposed over the older ensimaticarc complex. The superimposed portions of the younger arc complex are represented by the Ablah, Samran, and possibly the Ararat groups. The ensimatic portion of the younger arc group is represented by the Halaban group, which was deposited to the east and northeast of the older ensimatic-arc complex. The Halaban group includes andesitic and dacitic volcanic rocks and associated clastic sedimentary rocks. The layered rocks of both arc complexes are intruded by dioritic (quartz diorite, tonalite, trondhjemite) plutonic rocks. The southern Shield is also subdivided into a number of structurally bounded, north-trending tectonic belts. Within the older ensimatic complex, three belts are recognized. From west to east, these are the Lith, Bidah, and Tayyah belts. Within these three belts, progressive facies changes indicate a gradation from deep-water facies in the south to shallow-water or-terrestrial facies in the north. The distribution of dioritic batholiths, as well as the distribution of layered-rock facies, suggests a northwest-trending axis for the older ensimatic-arc complex. The younger arc complex is present within six belts, the Makkah source papers. In Fleck and others (1980), the term 'quartz diorite' includes both tonalite and quartz diorite as defined in the International Union of Geological Sciences (IUGS) system of plutonic rock classification (Streckeisen, 1973). Initial 87Sr/86Sr ratios are not included in the appendix, but all rocks more than 660 m.y. old have initial ratios in the range 0.7021-0.7035, with only two greater than 0.7030. Thus, nothing in the Rb-Sr data suggests involvement of an older continental crust during the evolution of the southern Shield. A lead isotope study of ore minerals and potassium feldspars of the Arabian Shield by Stacey and others (1980) also suggests that no older (Archean to early Proterozoic) evolved continental-type crust underlies the southern Shield. An early summary of mapping (Schmidt and others, 1973) suggests that older sialic basement underlies the late Proterozoic layered rocks in the southern Shield. However, subsequent-mapping and the isotopic studies cited above have established that all of these rocks are of late Proterozoic age and that all rocks of the southern Shield that are more than 660 m.y. old have ensimatic or mantle isotopic characteristics. Figure 2 shows, with only two exceptions, that rocks more than 800 m.y. old are present west of the boundary separating the Tayyah and Khadra belts. The exceptions are two poorly controlled Rb-Sr ages obtained by Fleck (1980) on two quartz diorite plutons in the Malahah region (appendix 1, localities 26 and 27). Preliminary uranium-thorium zircon data of Stacey now suggest that one of these quartz diorite plutons (locality 26) has an age of approximately 640 m.y. Therefore, we prefer to discount the two dates of Fleck until further information is available. As noted earlier and as described below, most of the rocks of the southern Arabian Shield have characteristics typical of those formed in the island-arc environment by subduction-related processes. We shall refer to the group of rocks in the western part of the southern Shield, which formed from 1100 to 800 m.y. ago, as the 'older ensimatic-arc complex' and those in the eastern and northwestern parts, which formed from 800 to 690 m.y. ago, as the 'younger marginal-arc compl

Geology of the Lake Mary quadrangle, Iron County, Michigan

USGS Publications Warehouse

Bayley, Richard W.

1959-01-01

The Lake Mary quadrangle is in eastern Iron County, in the west part of the Upper Peninsula of Michigan. The quadrangle is underlain by Lower and Middle Precambrian rocks, formerly designated Archean and Algonkian rocks, and is extensively covered by Pleistocene glacial deposits. A few Upper Precambrian (Keweenawan) diabase dikes and two remnants of sandstone and dolomite of early Paleozoic age are also found in the area. The major structural feature is the Holmes Lake anticline, the axis of which strikes northwest through the northeast part of the quadrangle. Most of the quadrangle, therefore, is underlain by rock of the west limb of the anticline. To the northwest along the fold axis, the Holmes Lake anticline is separated from the Amasa oval by a saddle of transverse folds in the vicinity of Michigamme Mountain in the Kiernan quadrangle. The Lower Precambrian rocks are represented by the Dickinson group and by porphyritic red granite whose relation to the Dickinson group is uncertain, but which may be older. The rocks of the Dickinson group are chiefly green to black metavolcanic schist and red felsite, some of the latter metarhyolite. The dark schist is commonly magnetic. The Dickinson group underlies the core area of the Holmes Lake anticline, which is flanked by steeply dipping Middle Precambrian formations of the Animikie series. A major unconformity separates the Lower Precambrian rocks from the overlying Middle Precambrian rocks. In ascending order the formations of the Middle Precambrian are the Randville dolomite, the Hemlock formation, which includes the Mansfield iron-bearing slate member, and the Michigamme slate. An unconformity occurs between the Hemlock formation and Michigamme slate. The post-Hemlock unconformity is thought to be represented in the Lake Mary quadrangle by the absence of iron-formation of the Amasa formation, which is known to lie between the Hemlock and the Michigamme to the northwest of the Lake Mary quadrangle in the Crystal Falls quadrangle. Post-Hemlock erosion may account also for the absence of iron-formation of the Fence River formation on the east limb of the Holmes Lake anticline within the Lake Mary quadrangle. The Randville dolomite is not exposed and is known only from diamond drilling in the northeast part of the area where it occurs in the east and west limbs of the Holmes Lake anticline. The formation has a maximum thickness of about 2,100 feet; this includes a lower arkosic phase, some of which is quartz pebble conglomerate, a medial dolomitic phase, and an upper slate phase. The triad is gradational. Included within the formation are a few beds of chloritic schist thought to be of volcanic origin. An unconformity between the Randville and the succeeding Hemlock is not indicated in the quadrangle, but is probably present. The Hemlock formation is best exposed in the northwest and south-central parts of the area. The apparent thickness of the formation is 10,000- 17,000 feet. It is composed mainly of mafic metavolcanic rocks and intercalated slate and iron-formation. In the north part of the quadrangle the volcanic rocks are greenstone, which includes altered basaltic flow rocks, volcanic breccia, tuff, and slate. Pillow structures are common in the metabasalt. It is not certain if any Hemlock rocks are present in the east limb of the Holmes Lake anticline. In the south part of the quadrangle, the rocks of the Hemlock are chiefly chlorite and hornblende schist and hornfels. Pyroxene hornfels is sparingly present. At least two sedimentary slate belts are included in the Hemlock formation. One of these, the Mansfield iron-bearing slate member, includes in its upper part an altered chert-siderite iron-formation 30 to over 150 feet thick from which iron ore has been mined at the Mansfield location. The position of the iron-bearing rocks has been determined magnetically, and past explorations for iron ore are discussed. Though probably; unconformable, the contact between the Hemlock and the Michigamme formations appears conformable. The Michigamme slate consists of at least 4,000 feet of interbedded mica schist and granulite, the altered equivalents of the slate and graywacke characteristic of the Michigamme in adjacent areas. The Michigamme rocks are best exposed in the south part of the quadrangle in the vicinity of Peavy Pond. Two periods of regional metamorphism have resulted in the alteration of almost all of the rocks of the quadrangle. The Lower Precambrian rocks underwent at least one period of metamorphism, uplift, and erosion before the deposition of the Randville dolomite. After the deposition of the Michigamme slate, a post-Middle Precambrian period of regional metamorphism occurred with attending deformation and igneous intrusion. The grade of metamorphism rises toward the south in the area. The rocks in the northern two-thirds of the quadrangle are representative of greenschist facies of regional metamorphism, whereas the rocks in the southern onethird of the quadrangle are representative of the albite-epidote-amphibolite, the amphibolite, and the pyroxene hornfels facies, the metamorphic node centering about the intrusive Peavy Pond complex in the Peavy Pond area. The Precambrian sedimentary and volcanic rocks are cut by intrusive igneous rocks of different types and several different ages. Gabbroic sills and dikes invaded the Hemlock rocks at some time after the Hemlock was deposited and before the post-Middle Precambrian orogeny and metamorphism. Some contact metamorphism attended the intrusion of the major sills. One of the sills, the West Kiernan sill, is well differentiated. A syntectonic igneous body, composed of gabbro and minor ultramafic parts and fringed with intermediate and felsic differentiates and hybrids, the Peavy; Pond complex, was intruded into the Hemlock and Michigamme formations during the post-Middle Precambrian orogeny. The complex is situated in the Peavy Pond area at the crest of the regional metamorphic node. Contact-altered sedimentary and volcanic rocks margin the complex. The effects of regional metamorphism have been superposed on the contact metamorphic rocks peripheral to the complex and on the igneous rocks of the complex as well. The mafic augite-bearing rocks of the complex emplaced early in the orogeny were deformed by granulation at the peak of the deformation and subsequently metamorphosed to hornblende rocks. Some of the intermediate and felsic rocks of the complex were foliated by the deformation, while the more fluid, felsic parts of the complex were intruded under orogenic stress and crystallized after the peak of deformation. The deformation culminated in major faulting during which the formations were dislocated, and some of the granite of the complex was extremely brecciated. A few diabase dikes, probably of Keweenawan age, have intruded the deformed and altered Animikie rocks. The only known metallic resource is iron ore. The Mansfield mine produced 1¥2 million tons of high-grade iron ore between the years 1890 and 1913. Sporadic exploration since 1913 has failed to reveal other ore deposits of economic importance.

Effects of the earthquake of March 27, 1964, at Seward, Alaska: Chapter E in The Alaska earthquake, March 27, 1964: effects on communities

USGS Publications Warehouse

Lemke, Richard W.

1967-01-01

Seward, in south-central Alaska, was one of the towns most devastated by the Alaska earthquake of March 27, 1964. The greater part of Seward is built on an alluvial fan-delta near the head of Resurrection Bay on the southeast coast of the Kenai Peninsula. It is one of the few ports in south-central Alaska that is ice free all year, and the town’s economy is almost entirely dependent upon its port facilities. The Alaska earthquake of March 27, 1964, magnitude approximately 8.3–8.4, began at 6:36 p.m. Its epicenter was in the northern part of the Prince William Sound area; focal depth was 20–50 km. Strong ground motion at Seward lasted 3–4 minutes. During the shaking, a strip of land 50–400 feet wide along the Seward waterfront, together with docks and other harbor facilities, slid into Resurrection Bay as a result of large-scale submarine landsliding. Fractures ruptured the ground for'severa1 hundred feet back from the landslide scarps. Additional ground was fractured in the Forest Acres subdivision and on the alluvial floor of the Resurrection River valley; fountaining and sand boils accompanied the ground fracturing. Slide-generated wares, possibly seiche waves, and seismic sea waves crashed onto shore; ware runup was as much as 30 feet above mean lower low water and caused tremendous damage; fire from burning oil tanks added to the destruction. Damage from strong ground motion itself was comparatively minor. Tectonic subsidence of about 3.6 feet resulted in low areas being inundated at high tide. Thirteen people were killed and five were injured as a result of the earthquake. Eighty-six houses were totally destroyed and 260 were heavily damaged. The harbor facilities were almost completely destroyed, and the entire economic base of the town was wiped out. The total cost to replace the destroyed public and private facilities was estimated at $22 million. Seward lies on the axis of the Chugach Mountains geosyncline. The main structural trend in the mapped area, where the rocks consist almost entirely of graywacke and phyllite, is from near north to N. 20° E. Beds and cleavage of the rocks commonly dip 70° W. or NW. to near vertical. Locally, the rocks are complexly folded or contorted. So major faults were found in the mapped area, but small faults, shear zones, and joints are common. Surficial deposits of the area hare been divided for mapping into the following units: drift deposits, alluvial fan deposits, valley alluvium, intertidal deposits, landslide deposits, and artificial fill. Most of these units intergrade and were deposited more or less contemporaneously. The drift deposits consist chiefly of till that forms moraines along the lower flanks of the Resurrection River valley and up tributary valleys. The till is predominantly silt and sand and lesser amounts of clay-size particles, gravel, cobbles, and boulders. Glacial outwash and stratified ice-contact deposits constitute the remainder of the drift deposits. Fans and fan-deltas have been deposited at the valley mouths of tributary streams. Some, including the one upon which Seward built, project into Resurrection Bay, and deltaic-type deposits form their distal edges. The larger fans—composed chiefly of loosely compacted and poorly sorted silt, sand, and gravel—form broad aprons having low gradients. The fan deposits range in thickness from about 100 feet to possibly several hundred feet and, at least in some places, lie on a platform of compact drift. Smaller fans at the mouths of several canyons have steep gradients and considerable local relief. Valley alluvium, deposited chiefly by the Resurrection River, consists mostly of coarse sand and fine to medium gravel. In the axial part of the valley it is probably more than 100 feet thick. Near the head of Resurrection Bay, the alluvium is underlain by at least 75 feet of marine deltaic sediments, which are in turn underlain by 600 or more feet of drift in the deepest part of the bedrock valley. Beach, deltaic, and estuarine sediments, deposited on intertidal flats at the head of the bay and along far1 margins that extend into the bay, arc mapped as intertidal deposits. They consist mostly of silt, sand, and fine gravel, and lesser amounts of clay-size particles. The earthquake reactivated old slides and trigged new ones in the mountains. Rock and snow avalanches, debris flows, and creep of talus deposits characterized slide activity on the steeper slops. The Seward waterfront had been extended before the earthquake by adding artificial fill consisting of loose sand and gravel; part of the lagoon area had been filled with refuse. After the earth- quake, fill, consisting of silt and sand dredged from the head of the bay, was pumped onto part of the lagoon area and also on land at the northwest corner of the bay. Response to the disaster was immediate and decisive. City, State, and Federal agencies, as well as other organizations and individuals, gave unstintingly of their time and facilities. Within a few days, there was temporary restoration of water, sewerage, and electrical facilities. The U.S. Army Corps of Engineers was authorized to select sites and construct a new dock for the Alaska Railroad, a new small-boat basin, and related facilities. The firm of Shannon and Wilson, Inc., under contract to the Corps of Engineers, investigated subsurface soils extensively to determine the factors responsible for the sliding along the Seward waterfront and to assist in site selection for reconstruction of the destroyed harbor facilities. Borings also made along the Seward waterfront and at the head of the bay, and laboratory tests were conducted on pertinent samples. These studies were augmented by geophysical studies both on land and in the bay. In addition, the Corps of Engineers made shallow borings on the intertidal flats at the head of the bay and performed pile-driving and load tests. Borings also were drilled and test pits were dug in the subdivision of Forest Acres. Sliding along the Seward waterfront markedly deepened the water along the former shoreline. Post-earthquake slopes of the bay floor immediately offshore also are steeper in places than before the earthquake. The strong ground motion of the earthquake triggered the landsliding, but several factors may have contributed to the magnitude and characteristics of the slides. These factors are: (1) the long duration of strong ground motion, (2) the grain size and texture of the material involved in the sliding, (3) the probability that the finer grained materials liquefied and flowed seaward, and (4) the added load of manmade facilities built on the edge of the shore, Secondary effects of the slides themselves—sudden drawdown of water, followed by the weight of returning waves—also may have contributed to the destruction. Submarine sliding at the northwest corner of the bay occurred in fine-grained deltaic deposits whose frontal slopes probably were in metastable equilibrium under static conditions. Uplift pressures from aquifers under hydrostatic head, combined with the probable liquefaction characteristics of the sediments when vibrated by strong ground motion, probably caused the material to slide and flow seaward as a heavy slurry. Under static conditions, no major shoreline or submarine landsliding is expected in the Seward area; in the event of another severe earthquake, however, additional sliding is likely along the Seward waterfront and also in the deltaic deposits at the northwest corner of the bay. Fractured ground in back of the present shoreline along the Seward waterfront is an area of incipient landslides that would be unstable under strong shaking. For this reason the Scientific and Engineering Task Force placed the area in a high-risk classification and recommended no repair, rehabilitation, or new construction in this area involving use of Federal funds; it was further recommended that the area should be reserved for park or other uses that do not involve large congregations of people. The deltaic deposits at the head of the bay probably also would be susceptible to sliding during another large earthquake. This sliding would result in further landward retreat of the present shoreline toward the new railroad dock. Specifications for the new dock, whose seaward end is now approximately 1,100 feet from the back scarp of the subaqueous landslide, require design pro- visions to withstand seismic shock up to certain limits. Earthquake-induced fracturing of the ground in the subdivision of Forest Acres was confined to the lower part of a broad alluvial fan. There, sewer and water lines were ruptured and the foundations of some homes were heavily damaged. Landsliding, such as occurred along the shoreline of the bay, was not a contributing cause of the fracturing. Two hypotheses are offered to explain the fracturing: 1. Seismic energy was transformed into visible surface waves of such amplitude that the strength of surface layer was exceeded and rupturing occurred; tensional and compressional stresses alternately opened and closed the fractures and forced out water and mud. 2. Compaction by vibration of the fine-grained deposits of the fan caused ground settlement and fracturing; ground water under temporary hydrostatic head was forced to the surface as fountains and carried the finer material with it. Water waves that crashed onto shore, while shaking was still continuing, were generated chiefly by onshore and offshore landsliding. Waves that overran the shores about 25 minutes after shaking stopped and that continued to arrive for the next several hours are believed to be seismic sea waves (tsunamis) that originated in an uplifted area in the Gulf of Alaska. During the time of seismic sea-wave activity and perhaps preceding it, seiche wares also may have been generated within Resurrection Bay and complicated the wave effects along the shoreline.