Science.gov

Sample records for groth strip survey

  1. The All-Wavelength Extended Groth Strip International Survey(AEGIS) Data Sets

    SciTech Connect

    Davis, M.; Guhathakurta, P.; Konidaris, N.P.; Newman, J.A.; Ashby, M.L.N.; Biggs, A.D.; Barmby, P.; Bundy, K.; Chapman, S.C.; Coil,A.L.; Conselice, C.J.; Cooper, M.C.; Croton, D.J.; Eisenhardt, P.R.M.; Ellis, R.S.; Faber, S.M.; Fang, T.; Fazio, G.G.; Georgakakis, A.; Gerke,B.F.; Goss, W.M.; Gwyn, S.; Harker, J.; Hopkins, A.M.; Huang, J.-S.; Ivison, R.J.; Kassin, S.A.; Kirby, E.N.; Koekemoer, A.M.; Koo, D.C.; Laird, E.S.; Le Floc'h, E.; Lin, L.; Lotz, J.M.; Marshall, P.J.; Martin,D.C.; Metevier, A.J.; Moustakas, L.A.; Nandra, K.; Noeske, K.G.; Papovich, C.; Phillips, A.C.; Rich,R. M.; Rieke, G.H.; Rigopoulou, D.; Salim, S.; Schiminovich, D.; Simard, L.; Smail, I.; Small,T.A.; Weiner,B.J.; Willmer, C.N.A.; Willner, S.P.; Wilson, G.; Wright, E.L.; Yan, R.

    2006-10-13

    In this the first of a series of Letters, we present a description of the panchromatic data sets that have been acquired in the Extended Groth Strip region of the sky. Our survey, the All-wavelength Extended Groth Strip International Survey (AEGIS), is intended to study the physical properties and evolutionary processes of galaxies at z{approx}1. It includes the following deep, wide-field imaging data sets: Chandra/ACIS X-ray (0.5-10 keV), GALEX ultraviolet (1200-2500 Angstroms), CFHT/MegaCam Legacy Survey optical (3600-9000 Angstroms), CFHT/CFH12K optical (4500-9000 Angstroms), Hubble Space Telescope/ACS optical (4400-8500 Angstroms), Palomar/WIRC near-infrared (1.2-2.2 {micro}m), Spitzer/IRAC mid-infrared (3.6-8.0 {micro}m), Spitzer/MIPS far-infrared (24-70 {micro}m), and VLA radio continuum (6-20 cm). In addition, this region of the sky has been targeted for extensive spectroscopy using the DEIMOS spectrograph on the Keck II 10 m telescope. Our survey is compared to other large multiwavelength surveys in terms of depth and sky coverage.

  2. The All-wavelength Extended Groth Strip International Survey (AEGIS) Data Sets

    SciTech Connect

    Davis, M.; Guhathakurta, P.; Konidaris, N.; Newman, J.A.; Ashby, M.L.N.; Biggs, A.D.; Barmby, P.; Bundy, K.; Chapman, S.; Coil, A.L.; Conselice, C.; Cooper, M.; Croton, D.; Eisenhardt, P.; Ellis, R.; Faber, S.; Fang, T.; Fazio, G.G.; Georgakakis, A.; Gerke, B.; Goss, W.M.; /UC, Berkeley, Astron. Dept. /Lick Observ. /LBL, Berkeley /Harvard-Smithsonian Ctr. Astrophys. /Royal Observ., Edinburgh /Caltech /Arizona U., Astron. Dept. - Steward Observ. /Nottingham U. /Caltech, JPL /Imperial Coll., London /UC, Berkeley /NRAO, Socorro /Victoria U. /Sydney U. /Baltimore, Space Telescope Sci. /Taiwan, Natl. Taiwan U. /NOAO, Tucson /KIPAC, Menlo Park /UCLA /Oxford U. /Columbia U., Astron. Astrophys.

    2006-07-21

    In this the first of a series of ''Letters'', we present a description of the panchromatic data sets that have been acquired in the Extended Groth Strip region of the sky. Our survey, the All-wavelength Extended Groth Strip International Survey (AEGIS), is intended to study the physical properties and evolutionary processes of galaxies at z {approx} 1. It includes the following deep, wide-field imaging data sets: Chandra/ACIS{sup 30} X-ray (0.5-10 keV), GALEX{sup 31} ultraviolet (1200-2500 A), CFHT/MegaCam Legacy Survey{sup 32} optical (3600-9000 {angstrom}), CFHT/CFH12K optical (4500-9000 {angstrom}), Hubble Space Telescope/ACS{sup 33} optical (4400-8500 {angstrom}), Palomar/WIRC{sup 34} near-infrared (1.2-2.2 {micro}m), Spitzer/IRAC{sup 35} mid-infrared (3.6-8.0 {micro}m), Spitzer/MIPS far-infrared (24-70 {micro}m), and VLA{sup 36} radio continuum (6-20 cm). In addition, this region of the sky has been targeted for extensive spectroscopy using the DEIMOS spectrograph on the Keck II 10 m telescope{sup 37}. Our survey is compared to other large multiwavelength surveys in terms of depth and sky coverage.

  3. OTELO SURVEY: DEEP BVRI BROADBAND PHOTOMETRY OF THE GROTH STRIP. II. OPTICAL PROPERTIES OF X-RAY EMITTERS

    SciTech Connect

    Povic, M.; Perez GarcIa, A. M.; Bongiovanni, A.; Castaneda, H.; Lorenzo, M. Fernandez; Lara-Lopez, M. A.; Sanchez-Portal, M.; Alfaro, E.; Gallego, J.; Gonzalez-Serrano, J. I.; Gonzalez, J. J. E-mail: miguel.sanchez@sciops.esa.in

    2009-11-20

    The Groth field is one of the sky regions that will be targeted by the OSIRIS Tunable Filter Emission Line Object survey in the optical 820 nm and 920 nm atmospheric windows. In the present paper, public Chandra X-ray data with total exposure time of 200 ks are analyzed and combined with optical broadband data of the Groth field, in order to study a set of optical structural parameters of the X-ray emitters and its relation with X-ray properties. To this aim, we processed the raw, public X-ray data using the Chandra Interactive Analysis of Observations, and determined and analyzed different structural parameters, in order to produce a morphological classification of X-ray sources. We present the morphology of 340 X-ray emitters with optical counterpart detected. Objects have been classified by X-ray type using a diagnostic diagram relating X-ray-to-optical ratio (X/O) to hardness ratio. We did not find any clear correlation between X-ray and morphological types. We analyzed the angular clustering of X-ray sources with optical counterpart using two-point correlation functions. A significant positive angular clustering was obtained from a preliminary analysis of four subsamples of the X-ray sources catalog. The clustering signal of the optically extended counterparts is similar to that of strongly clustered populations like red and very red galaxies, suggesting that the environment plays an important role in active galactic nuclei phenomena. Finally, we combined optical structural parameters with other X-ray and optical properties, and we confirmed an anticorrelation between the X/O ratio and the Abraham concentration index, which might suggest that early-type galaxies have lower Eddington rates than those of late-type galaxies.

  4. The morphology and masses of EROs in the Groth Strip

    NASA Astrophysics Data System (ADS)

    Hempel, A.; Cristóbal-Hornillos, D.; Prieto, M.; Trujillo, I.; Balcells, M.; López-Sanjuan, C.; Abreu, D.; Eliche-Moral, M. C.; Domínguez~Palmero, L.

    2011-11-01

    We investigate the morphologies, masses and possible correlations between these two properties for 108 extremely red galaxies (EROs) found in the Groth strip. The photometric data include U, B, F606W, F814W, J, and K_s bands. The EROs were selected on the basis of their extremely red colour, F814W-K_s ≥ 4 and K_s ≤ 21.0. Morphologies are based on a by eye classification and we distinguish between 3 basic classes: compact objects, targets with a disc and/or a bulge component, and irregular or merger candidates. An additional group consists of the few objects which could not be classified. The majority of our targets has either a very compact morphology (37 ± 6%), or show more or less distinct disc components (39 ± 6%). 13 ± 3% are merger or irregulars and a small number of objects (approximately 10%) could not be classified.As found in previous studies, most the EROs in our sample have redshifts between z=1 and z=2; however, compact EROs in our sample are found at redshifts as low as z=0.4 and as high as z=2.8; the latter qualify as well as distant red objects (DRGs). Disky EROs are also found up to z=2.8; however those with a bulge-like nucleus are only seen at z<1.5.For each of these EROs we determined the stellar mass and mean population age by fitting synthetic spectra (Bruzual 2007, IAU Symp., 241, 125) to the photometric spectral energy distributions, via χ^2 minimisation. Mass estimates were obtained by assuming an exponentially declining star formation rate with a wide set of parameters, e.g. decay time, redshift of last star formation, metallicity, and optical depth. Total stellar masses for our sample are in the range 9.1 < log(M_*/M_⊙) < 11.6. We cannot detect significant differences between the stellar mass distribution of the morphological classe, i.e. the median stellar mass seems independent of morphology. However, above log(M_*/M_⊙) > 11.0 galaxies dominantly show compact morphologies. We do not observe a strong evolution within 1

  5. Multiwavelength Properties of the X-Ray Sources in the Groth-Westphal Strip Field

    NASA Astrophysics Data System (ADS)

    Miyaji, Takamitsu; Sarajedini, Vicki; Griffiths, Richard E.; Yamada, Toru; Schurch, Matthew; Cristóbal-Hornillos, David; Motohara, Kentaro

    2004-06-01

    We summarize the multiwavelength properties of X-ray sources detected in the 80 ks XMM-Newton observation of the Groth-Westphal strip, a contiguous strip of 28 Hubble Space Telescope Wide Field Planetary Camera 2 (WFPC2) images. Among the ~150 X-ray sources detected in the XMM-Newton field of view, 23 are within the WFPC2 fields. Ten spectroscopic redshifts are available from the Deep Extragalactic Evolutionary Probe and Canada-France Redshift Survey projects. Four of these show broad Mg II emission and can be classified as type 1 active galactic nuclei (AGNs). Two of those without any broad lines, nevertheless, have [Ne V] emission, which is an unambiguous signature of AGN activity. One is a narrow-line Seyfert 1 and the other a type 2 AGN. As a follow-up, we have made near-infrared spectroscopic observations using the OHS/CISCO spectrometer for five of the X-ray sources for which we found no indication of AGN activity in the optical spectrum. We have detected Hα+[N II] emission in four of them. A broad Hα component and/or a large [N II]/Hα ratio is seen, suggestive of AGN activity. Nineteen sources have been detected in the Ks band, and four of these are extremely red objects (EROs) (I814-Ks>4). The optical counterparts for the majority of the X-ray sources are bulge-dominated. The I814-Ks color of these bulge-dominated hosts are indeed consistent with evolving elliptical galaxies, while contaminations from star formation/AGNs seems to be present in their V606-I814 color. Assuming that the known local relations among the bulge luminosity, central velocity dispersion, and the mass of the central blackhole still hold at z~1, we compare the AGN luminosity with the Eddington luminosity of the central blackhole mass. The AGN bolometric luminosity to Eddington luminosity ratio ranges from 0.3% to 10%. Based on observations from the XMM-Newton, an ESA science mission with instruments and contributions directly funded by ESA member states and NASA. Also based on data

  6. X-ray Surface Brightness Profiles of Active Galactic Nuclei in the Extended Groth Strip: Implications for AGN Feedback

    NASA Astrophysics Data System (ADS)

    Chatterjee, Suchetana; Newman, Jeffrey A.; Jeltema, Tesla; Myers, Adam D.; Aird, James; Coil, Alison L.; Cooper, Michael; Finoguenov, Alexis; Laird, Elise; Montero-Dorta, Antonio; Nandra, Kirpal; Willmer, Christopher; Yan, Renbin

    2015-08-01

    Using data from the All Wavelength Extended Groth Strip International Survey (AEGIS) we statistically detect the extended X-ray emission in the interstellar medium (ISM)/intracluster medium (ICM) in both active and normal galaxies at 0.3 <= z <= 1.3. For both active galactic nuclei (AGN) host galaxy and normal galaxy samples that are matched in restframe color, luminosity, and redshift distribution, we tentatively detect excess X-ray emission at scales of 1-10'' at a few σ significance in the surface brightness profiles. The exact significance of this detection is sensitive to the true characterization of Chandra's point-spread function. The observed excess in the surface brightness profiles is suggestive of lower extended emission in AGN hosts compared to normal galaxies. This is qualitatively similar to theoretical predictions of the X-ray surface brightness profile from AGN feedback models, where feedback from AGN is likely to evacuate the gas from the center of the galaxy/cluster. We propose that AGN that are intrinsically underluminous in X-rays, but have equivalent bolometric luminosities to our sources will be the ideal sample to study more robustly the effect of AGN feedback on diffuse ISM/ICM gas.

  7. UV-TO-FIR ANALYSIS OF SPITZER/IRAC SOURCES IN THE EXTENDED GROTH STRIP. II. PHOTOMETRIC REDSHIFTS, STELLAR MASSES, AND STAR FORMATION RATES

    SciTech Connect

    Barro, G.; Perez-Gonzalez, P. G.; Gallego, J.; Villar, V.; Zamorano, J.; Ashby, M. L. N.; Kajisawa, M.; Yamada, T.; Miyazaki, S.

    2011-04-01

    Based on the ultraviolet to far-infrared photometry already compiled and presented in a companion paper (Paper I), we present a detailed spectral energy distribution (SED) analysis of nearly 80,000 IRAC 3.6 + 4.5 {mu}m selected galaxies in the Extended Groth Strip. We estimate photometric redshifts, stellar masses, and star formation rates (SFRs) separately for each galaxy in this large sample. The catalog includes 76,936 sources with [3.6] {<=} 23.75 (85% completeness level of the IRAC survey) over 0.48 deg{sup 2}. The typical photometric redshift accuracy is {Delta}z/(1 + z) = 0.034, with a catastrophic outlier fraction of just 2%. We quantify the systematics introduced by the use of different stellar population synthesis libraries and initial mass functions in the calculation of stellar masses. We find systematic offsets ranging from 0.1 to 0.4 dex, with a typical scatter of 0.3 dex. We also provide UV- and IR-based SFRs for all sample galaxies, based on several sets of dust emission templates and SFR indicators. We evaluate the systematic differences and goodness of the different SFR estimations using the deep FIDEL 70 {mu}m data available in the Extended Groth Strip. Typical random uncertainties of the IR-bases SFRs are a factor of two, with non-negligible systematic effects at z {approx}> 1.5 observed when only MIPS 24 {mu}m data are available. All data products (SEDs, postage stamps from imaging data, and different estimations of the photometric redshifts, stellar masses, and SFRs of each galaxy) described in this and the companion paper are publicly available, and they can be accessed through our the Web interface utility Rainbow-navigator.

  8. UV-TO-FIR ANALYSIS OF SPITZER/IRAC SOURCES IN THE EXTENDED GROTH STRIP. I. MULTI-WAVELENGTH PHOTOMETRY AND SPECTRAL ENERGY DISTRIBUTIONS

    SciTech Connect

    Barro, Guillermo; Perez-Gonzalez, P. G.; Gallego, J.; Villar, V.; Zamorano, J.; Ashby, M. L. N.; Kajisawa, M.; Yamada, T.; Miyazaki, S.

    2011-03-15

    We present an IRAC 3.6+4.5 {mu}m selected catalog in the Extended Groth Strip (EGS) containing photometry from the ultraviolet to the far-infrared and stellar parameters derived from the analysis of the multi-wavelength data. In this paper, we describe the method used to build coherent spectral energy distributions (SEDs) for all the sources. In a forthcoming companion paper, we analyze those SEDs to obtain robust estimations of stellar parameters such as photometric redshifts, stellar masses, and star formation rates. The catalog comprises 76,936 sources with [3.6] {<=} 23.75 mag (85% completeness level of the IRAC survey in the EGS) over 0.48 deg{sup 2}. For approximately 16% of this sample, we are able to deconvolve the IRAC data to obtain robust fluxes for the multiple counterparts found in ground-based optical images. Typically, the SEDs of the IRAC sources in our catalog count with more than 15 photometric data points, spanning from the ultraviolet wavelengths probed by GALEX to the far-infrared observed by Spitzer, and going through ground- and space-based optical and near-infrared data taken with 2-8 m class telescopes. Approximately 95% and 90% of all IRAC sources are detected in the deepest optical and near-infrared bands. These fractions are reduced to 85% and 70% for S/N > 5 detections in each band. Only 10% of the sources in the catalog have optical spectroscopy and redshift estimations. Almost 20% and 2% of the sources are detected by MIPS at 24 and 70 {mu}m, respectively. We also cross-correlate our catalog with public X-ray and radio catalogs. Finally, we present the Rainbow Navigator public Web interface utility, designed to browse all the data products resulting from this work, including images, spectra, photometry, and stellar parameters.

  9. The Whipple Strip Sky Survey

    NASA Astrophysics Data System (ADS)

    Kertzman, M. P.

    As part of the normal operation of the Whipple 10m Gamma Ray telescope, ten minute drift scan “zenith” runs are made each night of observation for use as calibration. Most of the events recorded during a zenith run are due to the background of cosmic ray showers. However, it would be possible for a hitherto unknown source of gamma rays to drift through the field. This paper reports the results of a search for serendipitous high energy gamma ray sources in the Whipple 10m nightly calibration zenith data. From 2000-2004 nightly calibration runs were taken at an elevation of 89 º. A 2- D analysis of these drift scan runs produces a strip of width ~ 3.5º in declination and spanning the full range of right ascension. In the 2004-05 observing season the calibration runs were taken at elevations of 86° and 83°. Beginning in the 2005-06 season, the nightly calibration runs were taken at an elevation of 80º. Collectively, these drift scans cover a strip approximately 12.5º wide in declination, centered at declination 37.18º, and spanning the full range of RA. The analysis procedures developed for drift scan data, the sensitivity of the method, and the results will be presented.

  10. Aerial survey techniques for locating abandoned strip mine land

    SciTech Connect

    Dattavio, L.E.; Mroczynski, R.P.; Weismiller, R.A.

    1980-01-01

    The Surface Mining Control and Reclamation Act requires that states develop regulatory programs and reclamation plans for surface mining activities. Prior to passage of this law, the Indiana legislature required Indiana Department of Natural Resources (IDNR) to survey abandoned mine lands not under the control of state reclamation laws. IDNR then contracted the Laboratory for Applications of Remote Sensing (LARS) at Purdue University to conduct a preliminary survey of these lands. Photointerpretation techniques of medium scale color infrared photography enabled the LARS staff to identify partially reclaimed and nonreclaimed sites with a 20-county area in southwestern Indiana. Over 4700 ha of abandoned lands were located and classified on the aerial photography. This information is currently being used by IDNR to develop reclamation plans to revegetate the abandoned lands. The results of this survey clearly indicate that photointerpretation is an effective technique to complete initial inventories of nonreclaimed mine lands.

  11. Simulating Compact Elliptical Galaxy Formation by Tidal Stripping for Comparison to the RESOLVE Survey

    NASA Astrophysics Data System (ADS)

    Ray, Christine; Snyder, Elaine M.; Kannappan, Sheila; Sinha, Manodeep; RESOLVE Team

    2016-01-01

    Observations of compact elliptical galaxies (cEs) have uncovered abnormally high velocity dispersions and surface brightnesses for objects of their mass. These properties indicate that they may be the tidally stripped remnants of larger disk galaxies. We test this tidal stripping scenario using N-body simulations of cE formation with the Gadget-2 code. We track the velocity dispersions of stellar particles within the half-light radius throughout our simulations, which allows us to compare our simulated galaxies with velocity dispersion data for cEs in the RESOLVE survey. We first consider initial conditions similar to published work, which report stripping of a large spiral galaxy (stellar mass ~ 10^11 solar masses) to cE size in a cluster potential. We find that the density of the disk galaxy is too high to allow it to lose particles to the less dense cluster. We argue that the initial position of the galaxy with respect to the cluster as well as the large size of the cluster particles in comparison to the size of the galaxy particles artificially heightened the stripping percentages reported in previous work. We hypothesize that only a dwarf galaxy with a shallower density profile can be stripped to cE size, and we present initial efforts to test this idea. We simulate a dwarf galaxy based on a real system in the RESOLVE survey, with stellar mass 10^9 solar masses and half-light radius 1.15 kpc. Within ~700 pc our dwarf is denser than our cluster, suggesting the stripped remnant should be close to the size of RESOLVE cEs. This radius contains approximately 13% of the total stellar mass of the galaxy, or ~2 x 10^8 solar masses. We therefore expect our stripped remnant to be at least this massive, although the impact parameter of the orbit will determine how much mass is actually removed. We discuss the position of our simulated galaxies compared to RESOLVE cEs in the velocity dispersion vs. mass plane. This research has been supported by National Science

  12. An Aerial Radiological Survey of the Las Vegas Strip and Adjacent Areas

    SciTech Connect

    Wasiolek, Piotr

    2009-02-01

    As proficiency training for the Radiological Mapping mission of the Aerial Measuring System (AMS), a survey team from the Remote Sensing Laboratory–Nellis (RSL-Nellis) conducted an aerial radiological survey of the Las Vegas Strip and adjacent areas on December 29, 2008. This survey was one of the bi-annual surveys carried in support of the city of Las Vegas Police Department (LVPD) before significant events on the Las Vegas Strip: e.g., the annual New Year’s Eve and July Fourth celebrations. The AMS operation and appropriate law enforcement agencies selected this area as an appropriate urban location to exercise AMS capability for mapping environmental radiation and searching for man-made radioactive sources. The surveys covered approximately 11 square miles. Each survey required a 2.5-hour-long flight, performed at an altitude of 300 ft above ground level (AGL) at a line spacing of 600 ft. Water line and test line flights are conducted over the Lake Mead and Government Wash areas to determine the non-terrestrial background contributed by aircraft, radon, and cosmic activity, and to determine the altitude-dependent air mass correction. The data were collected by the AMS data acquisition system (REDAR V) using an array of twelve 2" x 4" x 16" sodium iodide (NaI) detectors flown on-board a twin-engine Bell 412 helicopter. Gamma energy spectral data were collected second-by-second over the survey area. This spectral data allows the system to distinguish between natural terrestrial background contributions and man-made radioisotope contributions. Spectral data can also be used to identify specific man-made radioactive isotopes. Data geo-locations were determined with a Real-Time Differential Global Positioning System (RDGPS).

  13. Shapley Supercluster Survey: ram-pressure stripping versus tidal interactions in the Shapley supercluster

    NASA Astrophysics Data System (ADS)

    Merluzzi, P.; Busarello, G.; Dopita, M. A.; Haines, C. P.; Steinhauser, D.; Bourdin, H.; Mazzotta, P.

    2016-08-01

    We present two new examples of galaxies undergoing transformation in the Shapley supercluster core. These low-mass (M_{star }˜ 0.4-1× 10^{10} M⊙) galaxies are members of the two clusters SC 1329-313 (z ˜ 0.045) and SC 1327-312 (z ˜ 0.049). Integral-field spectroscopy complemented by imaging in the ugriK bands and in Hα narrow band is used to disentangle the effects of tidal interaction (TI) and ram-pressure stripping (RPS). In both galaxies, SOS 61086 and SOS 90630, we observe one-sided extraplanar ionized gas extending respectively ˜30 and ˜41 kpc in projection from their discs. The galaxies' gaseous discs are truncated, and the kinematics of the stellar and gas components are decoupled, supporting the RPS scenario. The emission of the ionized gas extends in the direction of a possible companion for both galaxies suggesting a TI. The overall gas velocity field of SOS 61086 is reproduced by ad hoc N-body/hydrodynamical simulations of RPS acting almost face-on and starting ˜250 Myr ago, consistent with the age of the young stellar populations. A link between the observed gas stripping and the cluster-cluster interaction experienced by SC 1329-313 and A3562 is suggested. Simulations of ram pressure acting almost edge-on are able to fully reproduce the gas velocity field of SOS 90630, but cannot at the same time reproduce the extended tail of outflowing gas. This suggests that an additional disturbance from a TI is required. This study adds a piece of evidence that RPS may take place in different environments with different impacts and witnesses the possible effect of cluster-cluster merger on RPS.

  14. SURVEYING THE AGENTS OF GALAXY EVOLUTION IN THE TIDALLY STRIPPED, LOW METALLICITY SMALL MAGELLANIC CLOUD (SAGE-SMC). I. OVERVIEW

    SciTech Connect

    Gordon, K. D.; Meixner, M.; Boyer, M. L.; Lawton, B.; Meade, M. R.; Whitney, B.; Babler, B.; Bracker, S.; Engelbracht, C.; Block, M.; Misselt, K.; Bot, C.; Sewilo, M.; Bernard, J.-P.; Blum, R.; Harris, J.; Bolatto, A.; Bonanos, A.; Hora, J. L.; Indebetouw, R.

    2011-10-15

    The Small Magellanic Cloud (SMC) provides a unique laboratory for the study of the lifecycle of dust given its low metallicity ({approx}1/5 solar) and relative proximity ({approx}60 kpc). This motivated the SAGE-SMC (Surveying the Agents of Galaxy Evolution in the Tidally Stripped, Low Metallicity Small Magellanic Cloud) Spitzer Legacy program with the specific goals of studying the amount and type of dust in the present interstellar medium, the sources of dust in the winds of evolved stars, and how much dust is consumed in star formation. This program mapped the full SMC (30 deg{sup 2}) including the body, wing, and tail in seven bands from 3.6 to 160 {mu}m using IRAC and MIPS on the Spitzer Space Telescope. The data were reduced and mosaicked, and the point sources were measured using customized routines specific for large surveys. We have made the resulting mosaics and point-source catalogs available to the community. The infrared colors of the SMC are compared to those of other nearby galaxies and the 8 {mu}m/24 {mu}m ratio is somewhat lower than the average and the 70 {mu}m/160 {mu}m ratio is somewhat higher than the average. The global infrared spectral energy distribution (SED) shows that the SMC has approximately 1/3 the aromatic emission/polycyclic aromatic hydrocarbon abundance of most nearby galaxies. Infrared color-magnitude diagrams are given illustrating the distribution of different asymptotic giant branch stars and the locations of young stellar objects. Finally, the average SED of H II/star formation regions is compared to the equivalent Large Magellanic Cloud average H II/star formation region SED. These preliminary results will be expanded in detail in subsequent papers.

  15. SEDS: The Spitzer Extended Deep Survey. Survey Design, Photometry, and Deep IRAC Source Counts

    NASA Technical Reports Server (NTRS)

    Ashby, M. L. N.; Willner, S. P.; Fazio, G. G.; Huang, J.-S.; Arendt, A.; Barmby, P.; Barro, G; Bell, E. F.; Bouwens, R.; Cattaneo, A.; Croton, D.; Dave, R.; Dunlop, J. S.; Egami, E.; Faber, S.; Finlator, K.; Grogin, N. A.; Guhathakurta, P.; Hernquist, L.; Hora, J. L.; Illingworth, G.; Kashlinsky, A; Koekmoer, A. M.; Koo, D. C.; Moseley, H.

    2013-01-01

    The Spitzer Extended Deep Survey (SEDS) is a very deep infrared survey within five well-known extragalactic science fields: the UKIDSS Ultra-Deep Survey, the Extended Chandra Deep Field South, COSMOS, the Hubble Deep Field North, and the Extended Groth Strip. SEDS covers a total area of 1.46 deg(exp 2) to a depth of 26 AB mag (3sigma) in both of the warm Infrared Array Camera (IRAC) bands at 3.6 and 4.5 micron. Because of its uniform depth of coverage in so many widely-separated fields, SEDS is subject to roughly 25% smaller errors due to cosmic variance than a single-field survey of the same size. SEDS was designed to detect and characterize galaxies from intermediate to high redshifts (z = 2-7) with a built-in means of assessing the impact of cosmic variance on the individual fields. Because the full SEDS depth was accumulated in at least three separate visits to each field, typically with six-month intervals between visits, SEDS also furnishes an opportunity to assess the infrared variability of faint objects. This paper describes the SEDS survey design, processing, and publicly-available data products. Deep IRAC counts for the more than 300,000 galaxies detected by SEDS are consistent with models based on known galaxy populations. Discrete IRAC sources contribute 5.6 +/- 1.0 and 4.4 +/- 0.8 nW / square m/sr at 3.6 and 4.5 micron to the diffuse cosmic infrared background (CIB). IRAC sources cannot contribute more than half of the total CIB flux estimated from DIRBE data. Barring an unexpected error in the DIRBE flux estimates, half the CIB flux must therefore come from a diffuse component.

  16. Robotic Stripping

    NASA Technical Reports Server (NTRS)

    2000-01-01

    UltraStrip Systems, Inc.'s M-200 removes paint from the hulls of ships faster than traditional grit-blasting methods. And, it does so without producing toxic airborne particles common to traditional methods. The M-2000 magnetically attaches itself to the hull of the ship. Its water jets generate 40,000 pounds of pressure per square inch, blasting away paint down to the ships steel substrate. The only by product is water and dried paint chips and these are captured by a vacuum system so no toxic residue can escape. It was built out of a partnership between the Jet Propulsion Laboratory and the National Robotics Engineering Consortium.

  17. SURVEYING THE AGENTS OF GALAXY EVOLUTION IN THE TIDALLY STRIPPED, LOW METALLICITY SMALL MAGELLANIC CLOUD (SAGE-SMC). II. COOL EVOLVED STARS

    SciTech Connect

    Boyer, Martha L.; Meixner, Margaret; Gordon, Karl D.; Shiao, Bernie; Srinivasan, Sundar; Van Loon, Jacco Th.; McDonald, Iain; Kemper, F.; Zaritsky, Dennis; Block, Miwa; Engelbracht, Charles W.; Misselt, Karl; Babler, Brian; Bracker, Steve; Meade, Marilyn; Whitney, Barbara; Hora, Joe; Robitaille, Thomas; Indebetouw, Remy; Sewilo, Marta

    2011-10-15

    We investigate the infrared (IR) properties of cool, evolved stars in the Small Magellanic Cloud (SMC), including the red giant branch (RGB) stars and the dust-producing red supergiant (RSG) and asymptotic giant branch (AGB) stars using observations from the Spitzer Space Telescope Legacy program entitled 'Surveying the Agents of Galaxy Evolution in the Tidally Stripped, Low Metallicity SMC', or SAGE-SMC. The survey includes, for the first time, full spatial coverage of the SMC bar, wing, and tail regions at IR wavelengths (3.6-160 {mu}m). We identify evolved stars using a combination of near-IR and mid-IR photometry and point out a new feature in the mid-IR color-magnitude diagram that may be due to particularly dusty O-rich AGB stars. We find that the RSG and AGB stars each contribute {approx}20% of the global SMC flux (extended + point-source) at 3.6 {mu}m, which emphasizes the importance of both stellar types to the integrated flux of distant metal-poor galaxies. The equivalent SAGE survey of the higher-metallicity Large Magellanic Cloud (SAGE-LMC) allows us to explore the influence of metallicity on dust production. We find that the SMC RSG stars are less likely to produce a large amount of dust (as indicated by the [3.6] - [8] color). There is a higher fraction of carbon-rich stars in the SMC, and these stars appear to reach colors as red as their LMC counterparts, indicating that C-rich dust forms efficiently in both galaxies. A preliminary estimate of the dust production in AGB and RSG stars reveals that the extreme C-rich AGB stars dominate the dust input in both galaxies, and that the O-rich stars may play a larger role in the LMC than in the SMC.

  18. CANDELS: THE COSMIC ASSEMBLY NEAR-INFRARED DEEP EXTRAGALACTIC LEGACY SURVEY

    SciTech Connect

    Grogin, Norman A.; Ferguson, Henry C.; Koekemoer, Anton M.; Brown, Thomas M.; Casertano, Stefano; Kocevski, Dale D.; Faber, S. M.; Acquaviva, Viviana; Alexander, David M.; Almaini, Omar; Ashby, Matthew L. N.; Barden, Marco; Bell, Eric F.; Bournaud, Frederic; Cassata, Paolo; Castellano, Marco; Challis, Peter; Chary, Ranga-Ram; and others

    2011-12-01

    The Cosmic Assembly Near-infrared Deep Extragalactic Legacy Survey (CANDELS) is designed to document the first third of galactic evolution, over the approximate redshift (z) range 8-1.5. It will image >250,000 distant galaxies using three separate cameras on the Hubble Space Telescope, from the mid-ultraviolet to the near-infrared, and will find and measure Type Ia supernovae at z > 1.5 to test their accuracy as standardizable candles for cosmology. Five premier multi-wavelength sky regions are selected, each with extensive ancillary data. The use of five widely separated fields mitigates cosmic variance and yields statistically robust and complete samples of galaxies down to a stellar mass of 10{sup 9} M{sub Sun} to z Almost-Equal-To 2, reaching the knee of the ultraviolet luminosity function of galaxies to z Almost-Equal-To 8. The survey covers approximately 800 arcmin{sup 2} and is divided into two parts. The CANDELS/Deep survey (5{sigma} point-source limit H = 27.7 mag) covers {approx}125 arcmin{sup 2} within Great Observatories Origins Deep Survey (GOODS)-N and GOODS-S. The CANDELS/Wide survey includes GOODS and three additional fields (Extended Groth Strip, COSMOS, and Ultra-deep Survey) and covers the full area to a 5{sigma} point-source limit of H {approx}> 27.0 mag. Together with the Hubble Ultra Deep Fields, the strategy creates a three-tiered 'wedding-cake' approach that has proven efficient for extragalactic surveys. Data from the survey are nonproprietary and are useful for a wide variety of science investigations. In this paper, we describe the basic motivations for the survey, the CANDELS team science goals and the resulting observational requirements, the field selection and geometry, and the observing design. The Hubble data processing and products are described in a companion paper.

  19. THE PHYSICAL ORIGINS OF THE MORPHOLOGY-DENSITY RELATION: EVIDENCE FOR GAS STRIPPING FROM THE SLOAN DIGITAL SKY SURVEY

    SciTech Connect

    Van der Wel, Arjen; Bell, Eric F.; Skibba, Ramin A.; Rix, Hans-Walter; Holden, Bradford P.

    2010-05-10

    We provide a physical interpretation and explanation of the morphology-density relation for galaxies, drawing on stellar masses, star formation rates, axis ratios, and group halo masses from the Sloan Digital Sky Survey. We first re-cast the classical morphology-density relation in more quantitative terms, using low star formation rate (quiescence) as a proxy for early-type morphology and dark matter halo mass from a group catalog as a proxy for environmental density: for galaxies of a given stellar mass the quiescent fraction is found to increase with increasing dark matter halo mass. Our novel result is that-at a given stellar mass-quiescent galaxies are significantly flatter in dense environments, implying a higher fraction of disk galaxies. Supposing that the denser environments differ simply by a higher incidence of quiescent disk galaxies that are structurally similar to star-forming disk galaxies of similar mass, explains simultaneously and quantitatively these quiescence-environment and shape-environment relations. Our findings add considerable weight to the slow removal of gas as the main physical driver of the morphology-density relation, at the expense of other explanations.

  20. Approximate strip exchanging.

    PubMed

    Roy, Swapnoneel; Thakur, Ashok Kumar

    2008-01-01

    Genome rearrangements have been modelled by a variety of primitives such as reversals, transpositions, block moves and block interchanges. We consider such a genome rearrangement primitive Strip Exchanges. Given a permutation, the challenge is to sort it by using minimum number of strip exchanges. A strip exchanging move interchanges the positions of two chosen strips so that they merge with other strips. The strip exchange problem is to sort a permutation using minimum number of strip exchanges. We present here the first non-trivial 2-approximation algorithm to this problem. We also observe that sorting by strip-exchanges is fixed-parameter-tractable. Lastly we discuss the application of strip exchanges in a different area Optical Character Recognition (OCR) with an example.

  1. Lateral flow strip assay

    DOEpatents

    Miles, Robin R.; Benett, William J.; Coleman, Matthew A.; Pearson, Francesca S.; Nasarabadi, Shanavaz L.

    2011-03-08

    A lateral flow strip assay apparatus comprising a housing; a lateral flow strip in the housing, the lateral flow strip having a receiving portion; a sample collection unit; and a reagent reservoir. Saliva and/or buccal cells are collected from an individual using the sample collection unit. The sample collection unit is immersed in the reagent reservoir. The tip of the lateral flow strip is immersed in the reservoir and the reagent/sample mixture wicks up into the lateral flow strip to perform the assay.

  2. Anatomy comic strips.

    PubMed

    Park, Jin Seo; Kim, Dae Hyun; Chung, Min Suk

    2011-01-01

    Comics are powerful visual messages that convey immediate visceral meaning in ways that conventional texts often cannot. This article's authors created comic strips to teach anatomy more interestingly and effectively. Four-frame comic strips were conceptualized from a set of anatomy-related humorous stories gathered from the authors' collective imagination. The comics were drawn on paper and then recreated with digital graphics software. More than 500 comic strips have been drawn and labeled in Korean language, and some of them have been translated into English. All comic strips can be viewed on the Department of Anatomy homepage at the Ajou University School of Medicine, Suwon, Republic of Korea. The comic strips were written and drawn by experienced anatomists, and responses from viewers have generally been favorable. These anatomy comic strips, designed to help students learn the complexities of anatomy in a straightforward and humorous way, are expected to be improved further by the authors and other interested anatomists.

  3. Prefix Stripping Revisited.

    ERIC Educational Resources Information Center

    Taft, Marcus

    1981-01-01

    Presents and analyzes three experiments on prefix stripping. Results show that pseudoprefixed words are indiscriminately treated as prefixed words and concludes that prefix stripping does occur in word recognition and that prefixed words are accessed through a representation of their stem. (Author/BK)

  4. Anatomy Comic Strips

    ERIC Educational Resources Information Center

    Park, Jin Seo; Kim, Dae Hyun; Chung, Min Suk

    2011-01-01

    Comics are powerful visual messages that convey immediate visceral meaning in ways that conventional texts often cannot. This article's authors created comic strips to teach anatomy more interestingly and effectively. Four-frame comic strips were conceptualized from a set of anatomy-related humorous stories gathered from the authors' collective…

  5. Science Comic Strips

    ERIC Educational Resources Information Center

    Kim, Dae Hyun; Jang, Hae Gwon; Shin, Dong Sun; Kim, Sun-Ja; Yoo, Chang Young; Chung, Min Suk

    2012-01-01

    Science comic strips entitled Dr. Scifun were planned to promote science jobs and studies among professionals (scientists, graduate and undergraduate students) and children. To this end, the authors collected intriguing science stories as the basis of scenarios, and drew four-cut comic strips, first on paper and subsequently as computer files.…

  6. Stripping with dry ice

    NASA Astrophysics Data System (ADS)

    Malavallon, Olivier

    1995-04-01

    Mechanical-type stripping using dry ice (solid CO2) consists in blasting particles of dry ice onto the painted surface. This surface can be used alone or in duplex according to type of substrate to be treated. According to operating conditions, three physical mechanisms may be involved when blasting dry ice particles onto a paint system: thermal shock, differential thermal contraction, and mechanical shock. The blast nozzle, nozzle travel speed, blast angle, stripping distance, and compressed air pressure and media flow rate influence the stripping quality and the uniformity and efficiency obtained.

  7. Compton thick active galactic nuclei in Chandra surveys

    NASA Astrophysics Data System (ADS)

    Brightman, Murray; Nandra, Kirpal; Salvato, Mara; Hsu, Li-Ting; Aird, James; Rangel, Cyprian

    2014-09-01

    We present the results from an X-ray spectral analysis of active galactic nuclei (AGN) in the Chandra Deep Field-South, All-wavelength Extended Groth-strip International Survey (AEGIS)-Deep X-ray survey (XD) and Chandra-Cosmic Evolution Surveys (COSMOS), focusing on the identification and characterization of the most heavily obscured, Compton thick (CT, NH > 1024 cm-2) sources. Our sample is comprised of 3184 X-ray selected extragalactic sources, which has a high rate of redshift completeness (96.6 per cent), and includes additional spectroscopic redshifts and improved photometric redshifts over previous studies. We use spectral models designed for heavily obscured AGN which self-consistently include all major spectral signatures of heavy absorption. We validate our spectral fitting method through simulations, identify CT sources not selected through this method using X-ray colours and take considerations for the constraints on NH given the low count nature of many of our sources. After these considerations, we identify a total of 100 CT AGN with best-fitting NH > 1024 cm-2 and NH constrained to be above 1023.5 cm-2 at 90 per cent confidence. These sources cover an intrinsic 2-10 keV X-ray luminosity range of 1042-3 × 1045 erg s-1 and a redshift range of z = 0.1-4. This sample will enable characterization of these heavily obscured AGN across cosmic time and to ascertain their cosmological significance. These survey fields are sites of extensive multiwavelength coverage, including near-infrared Cosmic Assembly Near-infrared Deep Extragalactic Legacy Survey (CANDELS) data and far-infrared Herschel data, enabling forthcoming investigations into the host properties of CT AGN. Furthermore, by using the torus models to test different covering factor scenarios, and by investigating the inclusion of the soft scattered emission, we find evidence that the covering factor of the obscuring material decreases with LX for all redshifts, consistent with the receding torus model

  8. Hydrocarbon product stripping

    SciTech Connect

    Harandi, M.N.; Owen, H.; Siuta, M.T.

    1989-04-18

    A method is described for stripping light gasiform components from the liquid effluent of a catalytic hydrodesulfurization process, which comprises separating the liquid effluent containing relatively low boiling hydrocarbon components, relatively high boiling hydrocarbon components, hydrogen, and hydrogen sulfide.

  9. A Morphological and Multicolor Survey for Faint QSOS

    NASA Astrophysics Data System (ADS)

    Beck-Winchatz, Bernhard

    The study of the evolution of the bulk of the quasar population requires a sample of objects from the populous faint end of the luminosity function. Such quasars are frustratingly dim with m ~ 24 at intermediate redshift. Recent ground-based surveys have failed to produce reliable samples largely due to the substantial morphological contamination by faint compact galaxies having colors similar to QSOs. In order to establish a more reliable ultrafaint sample, we have used the Apache Point 3.5-m telescope to take deep U-band CCD images in 24 of the 28 high galactic latitude fields of the ``Groth-Westphal Strip''. These fields have previously been imaged with F606W, F814W WFPC2 filters form Hubble Space Telescope, and cover 0.025 deg2 of the sky. Our approach hence combines multicolor information spanning 3000-10,000 A in three filters with the 0.1'' spatial resolution of HST to establish a multicolor and morphological survey for faint QSOs/AGN. The limiting magnitude of F606W = 24.0 (roughly B = 24.5) is approximately two magnitudes fainter than the limiting magnitudes of the faintest existing ground-based surveys. We identify 10 high likelihood UV-excess candidates with stellar or stellar nucleus + galaxy morphology in WFPC2. The surface density of QSO candidates to z ~ 2.1, F606W = 24.0 is 420+180-130deg -2 . To further eliminate possible contamination by compact emission line galaxies, we apply a F606W - F814W color-cut, which reduces the total number of candidates to 7 and the surface density to 290+160-110 . Our results are in excellent agreement with extrapolations of existing surveys, and with predictions of several popular empirical and physically-based models of the evolution of the QSO population. Thus, even pending followup confirming spectroscopy, the observed surface density of QSO candidates is already low enough to provide interesting constraints for such models.

  10. Deep Imaging Survey

    NASA Technical Reports Server (NTRS)

    2003-01-01

    This is the first Deep Imaging Survey image taken by NASA's Galaxy Evolution Explorer. On June 22 and 23, 2003, the spacecraft obtained this near ultraviolet image of the Groth region by adding multiple orbits for a total exposure time of 14,000 seconds. Tens of thousands of objects can be identified in this picture.

    The Galaxy Evolution Explorer mission is led by the California Institute of Technology, which is also responsible for the science operations and data analysis. NASA's Jet Propulsion Laboratory, Pasadena, Calif., a division of Caltech, manages the mission and built the science instrument. The mission was developed under NASA's Explorers Program, managed by the Goddard Space Flight Center, Greenbelt, Md. The mission's international partners include South Korea and France.

  11. Air stripping industrial wastewater

    SciTech Connect

    Lamarre, B.; Shearouse, D.

    1994-09-01

    Industrial wastewater can be quickly, efficiently and economically treated using air strippers. Air stripping removes a range of volatile and semi-volatile contaminants from water. And the performance of various types and sizes of tray-type air stripper for treating contaminated water now is highly predictable because of laboratory studies. Air stripping can be a fast, efficient and economical approach to treating industrial wastewater. However, since every industrial wastewater stream is unique, each must be evaluated to determine its constituents, its potentially adverse effects on treatability, and any pretreatment steps necessary to ensure desired results. The general principles of air stripping are simple. In an air stripper, the surfaces area of a film of contaminated water is maximized while air is directed across it. Contaminants at the air/water interface volatilize and are discharged to the atmosphere or to an off-gas treatment system.

  12. Evaluation of anatomy comic strips for further production and applications.

    PubMed

    Shin, Dong Sun; Kim, Dae Hyun; Park, Jin Seo; Jang, Hae Gwon; Chung, Min Suk

    2013-09-01

    The corresponding author of the study has been sketching comic strips to explain anatomy in a humorous manner. All the anatomy comic strips, including those in Korean (650 episodes) and English (451 episodes), can be viewed on the homepage (http://anatomy.co.kr). Such comic strips were created with the aim of assisting medical students. However, their impact was unknown, and therefore, we surveyed the students' responses. We noted that anatomy grades were better in the students who read the comic strips. The comics helped the trainees chat with individuals with and without a medical background. The authors also considered comments on the problems with the comic strips and attempted to find solutions. The episodes are being currently used and further produced for educational purposes. To support this effort, the readers' valuable opinions will be continuously collected and assessed.

  13. Retractable barrier strip

    DOEpatents

    Marts, D.J.; Barker, S.G.; McQueen, M.A.

    1996-04-16

    A portable barrier strip is described having retractable tire-puncture means for puncturing a vehicle tire. The tire-puncture means, such as spikes, have an armed position for puncturing a tire and a retracted position for not puncturing a tire. The strip comprises a plurality of barrier blocks having the tire-puncture means removably disposed in a shaft that is rotatably disposed in each barrier block. The shaft removably and pivotally interconnects the plurality of barrier blocks. Actuation cables cause the shaft to rotate the tire-puncture means to the armed position for puncturing a vehicle tire and to the retracted position for not puncturing the tire. Each tire-puncture means is received in a hollow-bed portion of its respective barrier block when in the retracted position. The barrier strip rests in its deployed position and substantially motionless as a tire rolls thereon and over. The strip is rolled up for retrieval, portability, and storage purposes, and extended and unrolled in its deployed position for use. 13 figs.

  14. Retractable barrier strip

    DOEpatents

    Marts, Donna J.; Barker, Stacey G.; Wowczuk, Andrew; Vellenoweth, Thomas E.

    2002-01-01

    A portable barrier strip having retractable tire-puncture spikes for puncturing a vehicle tire. The tire-puncture spikes have an armed position for puncturing a tire and a retracted position for not puncturing a tire. The strip comprises a plurality of barrier blocks having the tire-puncture spikes removably disposed in a shaft that is rotatably disposed in each barrier block. The plurality of barrier blocks hare hingedly interconnected by complementary hinges integrally formed into the side of each barrier block which allow the strip to be rolled for easy storage and retrieval, but which prevent irregular or back bending of the strip. The shafts of adjacent barrier blocks are pivotally interconnected via a double hinged universal joint to accommodate irregularities in a roadway surface and to transmit torsional motion of the shaft from block to block. A single flexshaft cable is connected to the shaft of an end block to allow a user to selectively cause the shafts of a plurality of adjacently connected barrier blocks to rotate the tire-puncture spikes to the armed position for puncturing a vehicle tire, and to the retracted position for not puncturing the tire. The flexshaft is provided with a resiliently biased retracting mechanism, and a release latch for allowing the spikes to be quickly retracted after the intended vehicle tire is punctured.

  15. Retractable barrier strip

    DOEpatents

    Marts, Donna J.; Barker, Stacey G.; McQueen, Miles A.

    1996-01-01

    A portable barrier strip having retractable tire-puncture means for puncturing a vehicle tire. The tire-puncture means, such as spikes, have an armed position for puncturing a tire and a retracted position for not puncturing a tire. The strip comprises a plurality of barrier blocks having the tire-puncture means removably disposed in a shaft that is rotatably disposed in each barrier block. The shaft removably and pivotally interconnects the plurality of barrier blocks. Actuation cables cause the shaft to rotate the tire-puncture means to the armed position for puncturing a vehicle tire and to the retracted position for not puncturing the tire. Each tire-puncture means is received in a hollow-bed portion of its respective barrier block when in the retracted position. The barrier strip rests stable in its deployed position and substantially motionless as a tire rolls thereon and over. The strip is rolled up for retrieval, portability, and storage purposes, and extended and unrolled in its deployed position for use.

  16. Environmental control technology survey of selected US strip mining sites. Volume 2B. Alabama. Water quality impacts and overburden chemistry of Alabama study site

    SciTech Connect

    Henricks, J D; Bogner, J E; Olsen, R D; Schubert, J P; Sobek, A A; Johnson, D O

    1980-05-01

    As part of a program to examine the ability of existing control technologies to meet federal guidelines for the quality of aqueous effluents from coal mines, an intensive study of water, coal, and overburden chemistry was conducted at a surface coal mine in Alabama from May 1976 through July 1977. Sampling sites included the pit sump, a stream downgrade from the mine, the discharge from the water treatment facility, and a small stream outside the mine drainage. Water samples were collected every two weeks by Argonne subcontractors at the Alabama Geological Survey and analysed for the following parameters: specific conductance, pH, temperature, acidity, bicarbonate, carbonate, chloride, total dissolved solids, suspended solids, sulfate, and 20 metals. Analysis of the coal and overburden shows that no potential acid problem exists at this mine. Water quality is good in both streams sampled, and high levels of dissolved elements are found only in water collected from the pit sump. The mine effluent is in compliance with Office of Surface Mining water quality standards.

  17. Strip interpolation in silicon and germanium strip detectors.

    SciTech Connect

    Wulf, E. A.; Phlips, B. F.; Johnson, W. N.; Kurfess, J. D.; Lister, C. J.; Kondev, F.; Physics; Naval Research Lab.

    2004-01-01

    The position resolution of double-sided strip detectors is limited by the strip pitch and a reduction in strip pitch necessitates more electronics. Improved position resolution would improve the imaging capabilities of Compton telescopes and PET detectors. Digitizing the preamplifier waveform yields more information than can be extracted with regular shaping electronics. In addition to the energy, depth of interaction, and which strip was hit, the digitized preamplifier signals can locate the interaction position to less than the strip pitch of the detector by looking at induced signals in neighboring strips. This allows the position of the interaction to be interpolated in three dimensions and improve the imaging capabilities of the system. In a 2 mm thick silicon strip detector with a strip pitch of 0.891 mm, strip interpolation located the interaction of 356 keV gamma rays to 0.3 mm FWHM. In a 2 cm thick germanium detector with a strip pitch of 5 mm, strip interpolation of 356 keV gamma rays yielded a position resolution of 1.5 mm FWHM.

  18. Gated strip proportional detector

    DOEpatents

    Morris, Christopher L.; Idzorek, George C.; Atencio, Leroy G.

    1987-01-01

    A gated strip proportional detector includes a gas tight chamber which encloses a solid ground plane, a wire anode plane, a wire gating plane, and a multiconductor cathode plane. The anode plane amplifies the amount of charge deposited in the chamber by a factor of up to 10.sup.6. The gating plane allows only charge within a narrow strip to reach the cathode. The cathode plane collects the charge allowed to pass through the gating plane on a set of conductors perpendicular to the open-gated region. By scanning the open-gated region across the chamber and reading out the charge collected on the cathode conductors after a suitable integration time for each location of the gate, a two-dimensional image of the intensity of the ionizing radiation incident on the detector can be made.

  19. Gated strip proportional detector

    DOEpatents

    Morris, C.L.; Idzorek, G.C.; Atencio, L.G.

    1985-02-19

    A gated strip proportional detector includes a gas tight chamber which encloses a solid ground plane, a wire anode plane, a wire gating plane, and a multiconductor cathode plane. The anode plane amplifies the amount of charge deposited in the chamber by a factor of up to 10/sup 6/. The gating plane allows only charge within a narrow strip to reach the cathode. The cathode plane collects the charge allowed to pass through the gating plane on a set of conductors perpendicular to the open-gated region. By scanning the open-gated region across the chamber and reading out the charge collected on the cathode conductors after a suitable integration time for each location of the gate, a two-dimensional image of the intensity of the ionizing radiation incident on the detector can be made.

  20. Spray Rolling Aluminum Strip

    SciTech Connect

    Lavernia, E.J.; Delplanque, J-P; McHugh, K.M.

    2006-05-10

    Spray forming is a competitive low-cost alternative to ingot metallurgy for manufacturing ferrous and non-ferrous alloy shapes. It produces materials with a reduced number of processing steps, while maintaining materials properties, with the possibility of near-net-shape manufacturing. However, there are several hurdles to large-scale commercial adoption of spray forming: 1) ensuring strip is consistently flat, 2) eliminating porosity, particularly at the deposit/substrate interface, and 3) improving material yield. Through this program, a new strip/sheet casting process, termed spray rolling, has been developed, which is an innovative manufacturing technique to produce aluminum net-shape products. Spray rolling combines the benefits of twin-roll casting and conventional spray forming, showing a promising potential to overcome the above hurdles associated with spray forming. Spray rolling requires less energy and generates less scrap than conventional processes and, consequently, enables the development of materials with lower environmental impacts in both processing and final products. Spray Rolling was developed as a collaborative project between the University of California-Davis, the Colorado School of Mines, the Idaho National Engineering and Environmental Laboratory, and an industry team. The following objectives of this project were achieved: (1) Demonstration of the feasibility of the spray rolling process at the bench-scale level and evaluation of the materials properties of spray rolled aluminum strip alloys; and (2) Demonstration of 2X scalability of the process and documentation of technical hurdles to further scale up and initiate technology transfer to industry for eventual commercialization of the process.

  1. Paresev on Taxi Strip

    NASA Technical Reports Server (NTRS)

    1962-01-01

    Test pilot Milton Thompson sitting in NASA Flight Research Center-built Paresev 1 (Paraglider Research Vehicle) on the taxi strip in front of the NASA Flight Research Center in 1962. In this photo the control stick can be seen coming from overhead and hanging in front of the pilot. The control system was a direct link with the wing membrane made of doped Irish linen. By maintaining simplicity during construction, it was possible to make control and configuration changes overnight and, in many instances, in minutes.

  2. About NICADD extruded scintillating strips

    SciTech Connect

    Dyshkant, A.; Beznosko, D.; Blazey, G.; Chakraborty, D.; Francis, K.; Kubik, D.; Lima, J.G.; Rykalin, V.; Zutshi, v.; Baldina, E.; Bross, A.; Deering, P.; Nebel, T.; Pla-Dalmau, A.; Schellpfeffer, J.; Serritella, C.; Zimmerman, J.; /Fermilab

    2005-04-01

    The results of control measurements of extruded scintillating strip responses to a radioactive source Sr-90 are provided, and details of strip choice, preparation, and method of measurement are included. About four hundred one meter long extruded scintillating strips were measured at four different points. These results were essential for prototyping a tail catcher and muon tracker for a future international electron positron linear collider detector.

  3. Strip casting apparatus and method

    DOEpatents

    Williams, R.S.; Baker, D.F.

    1988-09-20

    Strip casting apparatus including a molten-metal-holding container and a nozzle to deposit molten metal onto a moving chill drum to directly cast continuous metallic strip. The nozzle body includes a slot bounded between a back and a front lip. The slot width exceeds about 20 times the gap distance between the nozzle and the chill drum surface. Preferably, the slot width exceeds 0.5 inch. This method of strip casting minimizes pressure drop, insuring better metal-to-chill-drum contact which promotes heat transfer and results in a better quality metallic strip. 6 figs.

  4. Strip casting apparatus and method

    DOEpatents

    Williams, Robert S.; Baker, Donald F.

    1988-01-01

    Strip casting apparatus including a molten-metal-holding container and a nozzle to deposit molten metal onto a moving chill drum to directly cast continuous metallic strip. The nozzle body includes a slot bounded between a back and a front lip. The slot width exceeds about 20 times the gap distance between the nozzle and the chill drum surface. Preferably, the slot width exceeds 0.5 inch. This method of strip casting minimizes pressure drop, insuring better metal-to-chill-drum contact which promotes heat transfer and results in a better quality metallic strip.

  5. Spiral Galaxies Stripped Bare

    NASA Astrophysics Data System (ADS)

    2010-10-01

    Six spectacular spiral galaxies are seen in a clear new light in images from ESO's Very Large Telescope (VLT) at the Paranal Observatory in Chile. The pictures were taken in infrared light, using the impressive power of the HAWK-I camera, and will help astronomers understand how the remarkable spiral patterns in galaxies form and evolve. HAWK-I [1] is one of the newest and most powerful cameras on ESO's Very Large Telescope (VLT). It is sensitive to infrared light, which means that much of the obscuring dust in the galaxies' spiral arms becomes transparent to its detectors. Compared to the earlier, and still much-used, VLT infrared camera ISAAC, HAWK-I has sixteen times as many pixels to cover a much larger area of sky in one shot and, by using newer technology than ISAAC, it has a greater sensitivity to faint infrared radiation [2]. Because HAWK-I can study galaxies stripped bare of the confusing effects of dust and glowing gas it is ideal for studying the vast numbers of stars that make up spiral arms. The six galaxies are part of a study of spiral structure led by Preben Grosbøl at ESO. These data were acquired to help understand the complex and subtle ways in which the stars in these systems form into such perfect spiral patterns. The first image shows NGC 5247, a spiral galaxy dominated by two huge arms, located 60-70 million light-years away. The galaxy lies face-on towards Earth, thus providing an excellent view of its pinwheel structure. It lies in the zodiacal constellation of Virgo (the Maiden). The galaxy in the second image is Messier 100, also known as NGC 4321, which was discovered in the 18th century. It is a fine example of a "grand design" spiral galaxy - a class of galaxies with very prominent and well-defined spiral arms. About 55 million light-years from Earth, Messier 100 is part of the Virgo Cluster of galaxies and lies in the constellation of Coma Berenices (Berenice's Hair, named after the ancient Egyptian queen Berenice II). The third

  6. Electronic rumble strip

    NASA Astrophysics Data System (ADS)

    Stauffer, Donald R.; Lenz, James

    1997-02-01

    Single vehicle run-off-road accidents are responsible for significant numbers of injuries and fatalities, and significant property damage. This fact spurs interest in warning systems to alert drivers that vehicles are drifting towards the edge of the road, and that a run-off road accident is imminent. An early attempt at such a warning system is the use of machined grooves on the shoulder to create a rumble strip. Such a system only provides warning, however, as the vehicle actually leaves the traffic lane. More desirable is a system that warns in anticipation of such departure. Honeywell has under development a magnetic lateral guidance system that couples a sensitive magnetoresistive transducer with a magnetic traffic marking tape being developed by 3M. While this development was initially undertaken for use in automated highways, or for special tasks such as guiding snowplow owners, the system can provide an effective, all-weather warning system to provide alert of impending departure from the roadway. This electronic rumble strip is actually a simpler system than the baseline guidance system, and can monitor both distance from the traffic lane edge and the speed of approach to the edge with a low cost sensor.

  7. Bismuth-based electrochemical stripping analysis

    DOEpatents

    Wang, Joseph

    2004-01-27

    Method and apparatus for trace metal detection and analysis using bismuth-coated electrodes and electrochemical stripping analysis. Both anodic stripping voltammetry and adsorptive stripping analysis may be employed.

  8. Stripped Crater Floor

    NASA Technical Reports Server (NTRS)

    2004-01-01

    10 February 2004 This full-resolution Mars Global Surveyor (MGS) Mars Orbiter Camera (MOC) image shows details on the floor of an ancient meteor crater in the northeastern part of Noachis Terra. After the crater formed, layers of material--perhaps sediment--were deposited in the crater. These materials became somewhat solidified, but later were eroded to form the patterns shown here. Many windblown ripples in the scene indicate the presence of coarse-grained sediment that was not completely stripped away by wind. The picture is located near 22.1oS, 307.0oW. Sunlight illuminates this scene from the left/upper left; the image covers an area 3 km (1.9 mi) wide.

  9. Microtube Strip Heat Exchanger

    SciTech Connect

    Doty, F.D.

    1990-12-27

    Doty Scientific (DSI) believes their Microtube-Strip Heat Exchanger will contribute significantly to (a) the closed Brayton cycles being pursued at MIT, NASA, and elsewhere; (b) reverse Brayton cycle cryocoolers, currently being investigated by NASA for space missions, being applied to MRI superconducting magnets; and (c) high-efficiency cryogenic gas separation schemes for CO{sub 2} removal from exhaust stacks. The goal of this current study is to show the potential for substantial progress in high-effectiveness, low-cost, gas-to-gas heat exchangers for diverse applications at temperatures from below 100 K to above 1000 K. To date, the highest effectiveness measured is about 98%, and relative pressure drops below 0.1% with a specific conductance of about 45 W/kgK are reported. During the pre-award period DSI built and tested a 3-module heat exchanger bank using 103-tube microtube strip (MTS) modules. To add to their analytical capabilities, DSI has acquired computational fluid dynamics (CFD) software. This report describes the pre-award work and the status of the ten tasks of the current project, which are: analyze flow distribution and thermal stresses within individual modules; design a heat exchanger bank of ten modules with 400 microtube per module; obtain production quality tubestrip die and AISI 304 tubestrips; obtain production quality microtubing; construct revised MTS heat exchanger; construct dies and fixtures for prototype heat exchanger; construct 100 MTS modules; assemble 8-10 prototype MTS heat exchangers; test prototype MTS heat exchanger; and verify test through independent means. 7 refs., 9 figs. 1 tab. (CK)

  10. Range gated strip proximity sensor

    DOEpatents

    McEwan, Thomas E.

    1996-01-01

    A range gated strip proximity sensor uses one set of sensor electronics and a distributed antenna or strip which extends along the perimeter to be sensed. A micro-power RF transmitter is coupled to the first end of the strip and transmits a sequence of RF pulses on the strip to produce a sensor field along the strip. A receiver is coupled to the second end of the strip, and generates a field reference signal in response to the sequence of pulse on the line combined with received electromagnetic energy from reflections in the field. The sensor signals comprise pulses of radio frequency signals having a duration of less than 10 nanoseconds, and a pulse repetition rate on the order of 1 to 10 MegaHertz or less. The duration of the radio frequency pulses is adjusted to control the range of the sensor. An RF detector feeds a filter capacitor in response to received pulses on the strip line to produce a field reference signal representing the average amplitude of the received pulses. When a received pulse is mixed with a received echo, the mixing causes a fluctuation in the amplitude of the field reference signal, providing a range-limited Doppler type signature of a field disturbance.

  11. Range gated strip proximity sensor

    DOEpatents

    McEwan, T.E.

    1996-12-03

    A range gated strip proximity sensor uses one set of sensor electronics and a distributed antenna or strip which extends along the perimeter to be sensed. A micro-power RF transmitter is coupled to the first end of the strip and transmits a sequence of RF pulses on the strip to produce a sensor field along the strip. A receiver is coupled to the second end of the strip, and generates a field reference signal in response to the sequence of pulse on the line combined with received electromagnetic energy from reflections in the field. The sensor signals comprise pulses of radio frequency signals having a duration of less than 10 nanoseconds, and a pulse repetition rate on the order of 1 to 10 MegaHertz or less. The duration of the radio frequency pulses is adjusted to control the range of the sensor. An RF detector feeds a filter capacitor in response to received pulses on the strip line to produce a field reference signal representing the average amplitude of the received pulses. When a received pulse is mixed with a received echo, the mixing causes a fluctuation in the amplitude of the field reference signal, providing a range-limited Doppler type signature of a field disturbance. 6 figs.

  12. The Measurement of Power Perception Through Cartoon Strip Completion.

    ERIC Educational Resources Information Center

    Goodchilds, Jacqueline D.; Raven, Bertram H.

    Two cartoon strips were the vehicle for surveying perceptions of power use in everyday situations. A stratified cross-sectional sample of 430 adults in Los Angeles were interviewed. Their task was to choose a behavior, illustrated by a cartoon panel, most likely to be employed by a policeman in one instance and a nurse in another to secure…

  13. Analysis/design of strip reinforced random composites (strip hybrids)

    NASA Technical Reports Server (NTRS)

    Chamis, C. C.; Sinclair, J. H.

    1978-01-01

    Advanced analysis methods and composite mechanics were applied to a strip-reinforced random composite square panel with fixed ends to illustrate the use of these methods for the a priori assessment of the composite panel when subjected to complex loading conditions. The panel was assumed to be of E-glass random composite. The strips were assumed to be of three advanced unidirectional composites to cover a range of low, intermediate, and high modulus stiffness. The panels were assumed to be subjected to complex loadings to assess their adequacy as load-carrying members in auto body, aircraft engine nacelle and windmill blade applications. The results show that strip hybrid panels can be several times more structurally efficient than the random composite base materials. Some of the results are presented in graphical form and procedures are described for use of these graphs as guides for preliminary design of strip hybrids.

  14. Analysis/design of strip reinforced random composites /strip hybrids/

    NASA Technical Reports Server (NTRS)

    Chamis, C. C.; Sinclair, J. H.

    1978-01-01

    Results are described which were obtained by applying advanced analysis methods and composite mechanics to a strip-reinforced random composite square panel with fixed ends. This was done in order to illustrate the use of these methods for the apriori assessment of the composite panel when subjected to complex loading conditions. The panel was assumed to be of E-Glass/Random Composite. The strips were assumed to be of three advanced unidirectional composites to cover a range of low, intermediate, and high modulus stiffness. The panels were assumed to be subjected to complex loadings to assess their adequacy as load-carrying members in auto body, aircraft engine nacelle, and windmill blade applications. The results show that strip hybrid panels can be several times more structurally efficient than the random composite base materials. Some of the results are presented in graphical form and procedures are described for use of these graphs as guides for preliminary design of strip hybrids.

  15. The lateral tarsal strip revisited. The enhanced tarsal strip.

    PubMed

    Jordan, D R; Anderson, R L

    1989-04-01

    The lateral tarsal strip procedure was originally designed for the treatment of upper and lower eyelid laxity, or lateral canthal tendon laxity or malposition. Despite the excellent results with a standard tarsal strip procedure for those eyelids with laxity and excess skin, we have encountered a number of patients with lower eyelid or canthal malpositions or both who would benefit from a tarsal strip, but who do not have lax tissues (especially skin), and may in fact have a shortage of skin. These include cases of lower lid retraction or canthal malposition following trauma, blepharoplasty, or other operations, and patients with tendency toward or having cicatricial ectropion. Any anterior lamella removal in such patients would aggravate the lid malposition and weaken the lateral canthal tissues to be sutured. We suggest a modification of the tarsal strip (developed by one of us [R.L.A.]) to treat many such patients without requiring additional anterior lamella (skin graft) or more formidable procedures. We refer to this technique as the "enhanced tarsal strip" technique, and we use this technique more frequently than the original tarsal strip procedure.

  16. Mobius Strip underlying Nonlinear Oscillators

    NASA Astrophysics Data System (ADS)

    Lopaz, Edaurdo; Satija, Indubala

    2004-03-01

    Geometrical and topolgocial aspects of phase space orbits of driven nonlinear oscillators are shown to share many features with the circuits on the mobius strips. Most important characteristic shared by nonlinear oscillators and the mobius strip is the first order geometrical phase transition characterized in terms of local variable torsion and the global variable the geometrical phase . These geometrical transitions are geometrical resonances and lead to geometrical localization that underlie not only limit cycles but also the strange attractors.

  17. The Dark Side of the Moebius Strip.

    ERIC Educational Resources Information Center

    Schwarz, Gideon E.

    1990-01-01

    Discussed are various models proposed for the Moebius strip. Included are a discussion of a smooth flat model and two smooth flat algebraic models, some results concerning the shortest Moebius strip, the Moebius strip of least elastic energy, and some observations on real-world Moebius strips. (KR)

  18. THE DEEP2 GALAXY REDSHIFT SURVEY: THE VORONOI-DELAUNAY METHOD CATALOG OF GALAXY GROUPS

    SciTech Connect

    Gerke, Brian F.; Newman, Jeffrey A.; Davis, Marc; Coil, Alison L.; Cooper, Michael C.; Dutton, Aaron A.; Faber, S. M.; Guhathakurta, Puragra; Koo, David C.; Phillips, Andrew C.; Noeske, Kai; Rosario, David J.; Weiner, Benjamin J.; Willmer, Christopher N. A.; Yan, Renbin

    2012-05-20

    We present a public catalog of galaxy groups constructed from the spectroscopic sample of galaxies in the fourth data release from the Deep Extragalactic Evolutionary Probe 2 (DEEP2) Galaxy Redshift Survey, including the Extended Groth Strip (EGS). The catalog contains 1165 groups with two or more members in the EGS over the redshift range 0 < z < 1.5 and 1295 groups at z > 0.6 in the rest of DEEP2. Twenty-five percent of EGS galaxies and fourteen percent of high-z DEEP2 galaxies are assigned to galaxy groups. The groups were detected using the Voronoi-Delaunay method (VDM) after it has been optimized on mock DEEP2 catalogs following similar methods to those employed in Gerke et al. In the optimization effort, we have taken particular care to ensure that the mock catalogs resemble the data as closely as possible, and we have fine-tuned our methods separately on mocks constructed for the EGS and the rest of DEEP2. We have also probed the effect of the assumed cosmology on our inferred group-finding efficiency by performing our optimization on three different mock catalogs with different background cosmologies, finding large differences in the group-finding success we can achieve for these different mocks. Using the mock catalog whose background cosmology is most consistent with current data, we estimate that the DEEP2 group catalog is 72% complete and 61% pure (74% and 67% for the EGS) and that the group finder correctly classifies 70% of galaxies that truly belong to groups, with an additional 46% of interloper galaxies contaminating the catalog (66% and 43% for the EGS). We also confirm that the VDM catalog reconstructs the abundance of galaxy groups with velocity dispersions above {approx}300 km s{sup -1} to an accuracy better than the sample variance, and this successful reconstruction is not strongly dependent on cosmology. This makes the DEEP2 group catalog a promising probe of the growth of cosmic structure that can potentially be used for cosmological tests.

  19. Characteristics of laminates with delamination control strips

    NASA Technical Reports Server (NTRS)

    Sun, C. T.; Goering, J. C.; Alper, J. M.; Gause, L. W.

    1992-01-01

    Tough resin is needed to resist delamination crack propagation. However, modulus often has to be compromised because it is difficult to retain both high modulus and toughness in a matrix material. A potential solution is to use a hybrid system in which tough resin strips are included within a conventional matrix composite. By adjusting the spacing of the tough resin strips, maximum delamination size can be controlled. Experimental results for impact damage and subsequent damage propagation in laminates containing tough resin strips are reported. Plain adhesive strips and fiber-reinforced tough resin composite strips were used in constructing the hybrid laminates. Test results indicated that size of delamination inflicted by impact was confined between the tough resin strips. As a result, significantly increased residual compressive strength was obtained. Impacted laminates containing tough resin strips were also fatigue tested. It was found that these strips reduced the growth of the impact damage area relative to the growth seen in coupons with no tough resin strips. Damage growth from an open hole under tension fatigue was evaluated using both tough resin strips and glass fiber reinforced tough resin strips. Unreinforced tough resin strips retarded delamination growth from the open hole, but did not stop matrix cracks growing in the fiber direction. Fiber reinforced tough resin strips did not contain axial delamination growth from the open hole. However, they did act as crack arresters, stopping the through-the-thickness tension crack originating from the hole.

  20. The Perils of Strip Searches.

    ERIC Educational Resources Information Center

    Trotter, Andrew

    1995-01-01

    Every year, a few administrators mishandle school searches and create spectacles similar to the New Castle, Pennsylvania, incident involving six illegally strip-searched students. Principals using "cops-and-robber" techniques to unearth contraband may not realize the potential for infringing on students' constitutional privacy rights. Strip…

  1. Bimaterial Thermal Strip With Increased Flexing

    NASA Technical Reports Server (NTRS)

    Morrison, Andrew D.

    1994-01-01

    In proposed bimaterial thermal strip, one layer has negative coefficient of thermal expansion, thereby increasing difference between coefficients of thermal expansion of two outer layers and consequently increasing flexing caused by change in temperature. Proposed bimaterial strips used in thermostats.

  2. Strip mining: Impacts on water resources. (Latest citations from the Selected Water Resources Abstracts database). Published Search

    SciTech Connect

    Not Available

    1993-07-01

    The bibliography contains citations concerning strip mine wastes and their effect on water resources. The citations include studies of the hydraulics of mine waste and runoff in general, as well as reporting survey results at selected strip mines. Land reclamation techniques and efforts are also considered. (Contains 250 citations and includes a subject term index and title list.)

  3. Air stripping for treatment of produced water

    SciTech Connect

    Fang, C.S.; Lin, J.H.

    1988-05-01

    In a laboratory study, air stripping shows a promising potential for treatment of produced water to meet new government regulations on total organic carbon (TOC). Reservoir hydrocarbons dissolved in water, such as volatile paraffins and aromatics, can be removed by air stripping through interphase mass transfer. However, air stripping cannot remove many chemicals added to crude oil by the operator.

  4. 33 CFR 157.128 - Stripping system.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... 33 Navigation and Navigable Waters 2 2012-07-01 2012-07-01 false Stripping system. 157.128 Section... of the following devices for stripping oil from each cargo tank: (1) A positive displacement pump. (2... positive displacement pump or a self-priming centrifugal pump, the stripping system must have the...

  5. 33 CFR 157.128 - Stripping system.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... 33 Navigation and Navigable Waters 2 2014-07-01 2014-07-01 false Stripping system. 157.128 Section... of the following devices for stripping oil from each cargo tank: (1) A positive displacement pump. (2... positive displacement pump or a self-priming centrifugal pump, the stripping system must have the...

  6. Using Comic Strips in Language Classes

    ERIC Educational Resources Information Center

    Csabay, Noémi

    2006-01-01

    The author believes that using comic strips in language-learning classes has three main benefits. First, comic strips motivate younger learners. Second, they provide a context and logically connected sentences to help language learning. Third, their visual information is helpful for comprehension. The author argues that comic strips can be used in…

  7. Confinement and Tritium Stripping Systems for APT Tritium Processing

    SciTech Connect

    Hsu, R.H.; Heung, L.K.

    1997-10-20

    This report identifies functions and requirements for the tritium process confinement and clean-up system (PCCS) and provides supporting technical information for the selection and design of tritium confinement, clean-up (stripping) and recovery technologies for new tritium processing facilities in the Accelerator for the Production of Tritium (APT). The results of a survey of tritium confinement and clean-up systems for large-scale tritium handling facilities and recommendations for the APT are also presented.

  8. Measuring the Dust Stripping of Galaxies by the Hot Intracluster Gas in the Virgo Cluster

    NASA Astrophysics Data System (ADS)

    Lee, Hye-Ran; Zabludoff, Ann I.; Lee, Joon Hyeop; French, K. Decker; Park, Byeong-Gon

    2016-06-01

    Ram pressure stripping, the removal of gas from galaxies interacting with the hot intracluster medium, has been proposed as a mechanism for quenching star formation in cluster galaxies. While much effort has been made to identify gas stripped from the interstellar medium (ISM) of cluster galaxies, the ISM also includes dust, another potential tracer of stripping. Previous studies using radio and infra-red wavelengths have suggested gas and dust stripping in several cluster galaxies. In our study, we try a different approach: searching for optical extinction and reddening of background galaxies by dust stripped from foreground cluster members. As the first step, using data from the Sloan Digital Sky Survey Data Release 12 (SDSS DR12) and the VLA Imaging of Virgo in Atomic gas (VIVA) HI survey, we map the magnitudes and colors of galaxies behind Virgo cluster galaxies whose HI morphologies are disrupted. We discuss how efficiently dust stripping can be measured with this method and the connection to gas stripping.

  9. THE DEEP2 GALAXY REDSHIFT SURVEY: DESIGN, OBSERVATIONS, DATA REDUCTION, AND REDSHIFTS

    SciTech Connect

    Newman, Jeffrey A.; Cooper, Michael C.; Davis, Marc; Faber, S. M.; Guhathakurta, Puragra; Koo, David C.; Phillips, Andrew C.; Conroy, Charlie; Harker, Justin J.; Lai, Kamson; Dutton, Aaron A.; Finkbeiner, Douglas P.; Gerke, Brian F.; Rosario, David J.; Weiner, Benjamin J.; Willmer, C. N. A.; Yan Renbin; Kassin, Susan A.; Konidaris, N. P. E-mail: djm70@pitt.edu E-mail: mdavis@berkeley.edu E-mail: koo@ucolick.org E-mail: phillips@ucolick.org; and others

    2013-09-15

    We describe the design and data analysis of the DEEP2 Galaxy Redshift Survey, the densest and largest high-precision redshift survey of galaxies at z {approx} 1 completed to date. The survey was designed to conduct a comprehensive census of massive galaxies, their properties, environments, and large-scale structure down to absolute magnitude M{sub B} = -20 at z {approx} 1 via {approx}90 nights of observation on the Keck telescope. The survey covers an area of 2.8 deg{sup 2} divided into four separate fields observed to a limiting apparent magnitude of R{sub AB} = 24.1. Objects with z {approx}< 0.7 are readily identifiable using BRI photometry and rejected in three of the four DEEP2 fields, allowing galaxies with z > 0.7 to be targeted {approx}2.5 times more efficiently than in a purely magnitude-limited sample. Approximately 60% of eligible targets are chosen for spectroscopy, yielding nearly 53,000 spectra and more than 38,000 reliable redshift measurements. Most of the targets that fail to yield secure redshifts are blue objects that lie beyond z {approx} 1.45, where the [O II] 3727 A doublet lies in the infrared. The DEIMOS 1200 line mm{sup -1} grating used for the survey delivers high spectral resolution (R {approx} 6000), accurate and secure redshifts, and unique internal kinematic information. Extensive ancillary data are available in the DEEP2 fields, particularly in the Extended Groth Strip, which has evolved into one of the richest multiwavelength regions on the sky. This paper is intended as a handbook for users of the DEEP2 Data Release 4, which includes all DEEP2 spectra and redshifts, as well as for the DEEP2 DEIMOS data reduction pipelines. Extensive details are provided on object selection, mask design, biases in target selection and redshift measurements, the spec2d two-dimensional data-reduction pipeline, the spec1d automated redshift pipeline, and the zspec visual redshift verification process, along with examples of instrumental signatures or

  10. The DEEP2 Galaxy Redshift Survey: Design, Observations, Data Reduction, and Redshifts

    NASA Technical Reports Server (NTRS)

    Newman, Jeffrey A.; Cooper, Michael C.; Davis, Marc; Faber, S. M.; Coil, Alison L; Guhathakurta, Puraga; Koo, David C.; Phillips, Andrew C.; Conroy, Charlie; Dutton, Aaron A.; Finkbeiner, Douglas P.; Gerke, Brian F.; Rosario, David J.; Weiner, Benjamin J.; Wilmer, C. N. A.; Yan, Renbin; Harker, Justin J.; Kassin, Susan A.; Konidaris, N. P.; Lai, Kamson; Madgwick, Darren S.; Noeske, K. G.; Wirth, Gregory D.; Kirby, Evan N.; Lotz, Jennifer M.

    2013-01-01

    We describe the design and data analysis of the DEEP2 Galaxy Redshift Survey, the densest and largest high-precision redshift survey of galaxies at z approx. 1 completed to date. The survey was designed to conduct a comprehensive census of massive galaxies, their properties, environments, and large-scale structure down to absolute magnitude MB = -20 at z approx. 1 via approx.90 nights of observation on the Keck telescope. The survey covers an area of 2.8 Sq. deg divided into four separate fields observed to a limiting apparent magnitude of R(sub AB) = 24.1. Objects with z approx. < 0.7 are readily identifiable using BRI photometry and rejected in three of the four DEEP2 fields, allowing galaxies with z > 0.7 to be targeted approx. 2.5 times more efficiently than in a purely magnitude-limited sample. Approximately 60% of eligible targets are chosen for spectroscopy, yielding nearly 53,000 spectra and more than 38,000 reliable redshift measurements. Most of the targets that fail to yield secure redshifts are blue objects that lie beyond z approx. 1.45, where the [O ii] 3727 Ang. doublet lies in the infrared. The DEIMOS 1200 line mm(exp -1) grating used for the survey delivers high spectral resolution (R approx. 6000), accurate and secure redshifts, and unique internal kinematic information. Extensive ancillary data are available in the DEEP2 fields, particularly in the Extended Groth Strip, which has evolved into one of the richest multiwavelength regions on the sky. This paper is intended as a handbook for users of the DEEP2 Data Release 4, which includes all DEEP2 spectra and redshifts, as well as for the DEEP2 DEIMOS data reduction pipelines. Extensive details are provided on object selection, mask design, biases in target selection and redshift measurements, the spec2d two-dimensional data-reduction pipeline, the spec1d automated redshift pipeline, and the zspec visual redshift verification process, along with examples of instrumental signatures or other

  11. The DEEP2 Galaxy Redshift Survey: Design, Observations, Data Reduction, and Redshifts

    NASA Astrophysics Data System (ADS)

    Newman, Jeffrey A.; Cooper, Michael C.; Davis, Marc; Faber, S. M.; Coil, Alison L.; Guhathakurta, Puragra; Koo, David C.; Phillips, Andrew C.; Conroy, Charlie; Dutton, Aaron A.; Finkbeiner, Douglas P.; Gerke, Brian F.; Rosario, David J.; Weiner, Benjamin J.; Willmer, C. N. A.; Yan, Renbin; Harker, Justin J.; Kassin, Susan A.; Konidaris, N. P.; Lai, Kamson; Madgwick, Darren S.; Noeske, K. G.; Wirth, Gregory D.; Connolly, A. J.; Kaiser, N.; Kirby, Evan N.; Lemaux, Brian C.; Lin, Lihwai; Lotz, Jennifer M.; Luppino, G. A.; Marinoni, C.; Matthews, Daniel J.; Metevier, Anne; Schiavon, Ricardo P.

    2013-09-01

    We describe the design and data analysis of the DEEP2 Galaxy Redshift Survey, the densest and largest high-precision redshift survey of galaxies at z ~ 1 completed to date. The survey was designed to conduct a comprehensive census of massive galaxies, their properties, environments, and large-scale structure down to absolute magnitude MB = -20 at z ~ 1 via ~90 nights of observation on the Keck telescope. The survey covers an area of 2.8 deg2 divided into four separate fields observed to a limiting apparent magnitude of R AB = 24.1. Objects with z <~ 0.7 are readily identifiable using BRI photometry and rejected in three of the four DEEP2 fields, allowing galaxies with z > 0.7 to be targeted ~2.5 times more efficiently than in a purely magnitude-limited sample. Approximately 60% of eligible targets are chosen for spectroscopy, yielding nearly 53,000 spectra and more than 38,000 reliable redshift measurements. Most of the targets that fail to yield secure redshifts are blue objects that lie beyond z ~ 1.45, where the [O II] 3727 Å doublet lies in the infrared. The DEIMOS 1200 line mm-1 grating used for the survey delivers high spectral resolution (R ~ 6000), accurate and secure redshifts, and unique internal kinematic information. Extensive ancillary data are available in the DEEP2 fields, particularly in the Extended Groth Strip, which has evolved into one of the richest multiwavelength regions on the sky. This paper is intended as a handbook for users of the DEEP2 Data Release 4, which includes all DEEP2 spectra and redshifts, as well as for the DEEP2 DEIMOS data reduction pipelines. Extensive details are provided on object selection, mask design, biases in target selection and redshift measurements, the spec2d two-dimensional data-reduction pipeline, the spec1d automated redshift pipeline, and the zspec visual redshift verification process, along with examples of instrumental signatures or other artifacts that in some cases remain after data reduction. Redshift

  12. Fast variation method for elastic strip calculation.

    PubMed

    Biryukov, Sergey V

    2002-05-01

    A new, fast, variation method (FVM) for determining an elastic strip response to stresses arbitrarily distributed on the flat side of the strip is proposed. The remaining surface of the strip may have an arbitrary form, and it is free of stresses. The FVM, as well as the well-known finite element method (FEM), starts with the variational principle. However, it does not use the meshing of the strip. A comparison of FVM results with the exact analytical solution in the special case of shear stresses and a rectangular strip demonstrates an excellent agreement.

  13. Antenna structure with distributed strip

    DOEpatents

    Rodenbeck, Christopher T.

    2008-10-21

    An antenna comprises electrical conductors arranged to form a radiating element including a folded line configuration and a distributed strip configuration, where the radiating element is in proximity to a ground conductor. The folded line and the distributed strip can be electrically interconnected and substantially coplanar. The ground conductor can be spaced from, and coplanar to, the radiating element, or can alternatively lie in a plane set at an angle to the radiating element. Embodiments of the antenna include conductor patterns formed on a printed wiring board, having a ground plane, spacedly adjacent to and coplanar with the radiating element. Other embodiments of the antenna comprise a ground plane and radiating element on opposed sides of a printed wiring board. Other embodiments of the antenna comprise conductors that can be arranged as free standing "foils". Other embodiments include antennas that are encapsulated into a package containing the antenna.

  14. Antenna structure with distributed strip

    DOEpatents

    Rodenbeck, Christopher T.

    2008-03-18

    An antenna comprises electrical conductors arranged to form a radiating element including a folded line configuration and a distributed strip configuration, where the radiating element is in proximity to a ground conductor. The folded line and the distributed strip can be electrically interconnected and substantially coplanar. The ground conductor can be spaced from, and coplanar to, the radiating element, or can alternatively lie in a plane set at an angle to the radiating element. Embodiments of the antenna include conductor patterns formed on a printed wiring board, having a ground plane, spacedly adjacent to and coplanar with the radiating element. Other embodiments of the antenna comprise a ground plane and radiating element on opposed sides of a printed wiring board. Other embodiments of the antenna comprise conductors that can be arranged as free standing "foils". Other embodiments include antennas that are encapsulated into a package containing the antenna.

  15. Robotic sensors for aircraft paint stripping

    NASA Astrophysics Data System (ADS)

    Weniger, Richard J.

    1990-10-01

    Aircraft of all types need to have paint routinely removed from their outer surfaces. Any method needs to be controlled to remove all the paint and not damage the surface of the aircraft. Human operators get bored with the monotonous task of stripping paint from an aircraft and thus do not control the process very well. This type of tedious operation tends itself to robotics. A robot that strips paint from aircraft needs to have feedback as to the state of the stripping process, its location in respect to the aircraft, and the availability of stripping material. This paper describes the sensors used on the paint stripping robot being developed for the United States Air Force's Manufacturing Technology Program. Particular attention is given to the paint sensor which is the feedback element for determining the state of the stripping process.

  16. Buffer strips in composites at elevated temperature

    NASA Technical Reports Server (NTRS)

    Bigelow, C. A.

    1983-01-01

    The composite material 'buffer strip' concept is presently investigated at elevated temperatures for the case of graphite/polyimide buffer strip panels using a (45/0/45/90)2S layup, where the buffer strip material was 0-deg S-glass/polyimide. Each panel was loaded in tension until it failed, and radiographs and crack opening displacements were recorded during the tests to determine fracture onset, fracture arrest, and the extent of damage in the buffer strip after crack arrest. At 177 + or - 3 C, the buffer strips increased the panel strength by at least 40 percent in comparison with panels without buffer strips. Compared to similar panels tested at room temperature, those tested at elevated temperature had lower residual strengths, but higher failure strains.

  17. Studies of NICADD Extruded Scintillator Strips

    SciTech Connect

    Dychkant, Alexandre; et al.

    2005-03-01

    About four hundred one meter long, 10 cm wide and 5 mm thick extruded scintillating strips were measured at four different points. The results of measurements strip responses to a radioactive source {sup 90}Sr are provided, and details of strip choice, preparation, and method of measurement are included. This work was essential for prototyping a tail catcher and muon tracker for a future international electron positron linear collider detector.

  18. Quantifiable Lateral Flow Assay Test Strips

    NASA Technical Reports Server (NTRS)

    2003-01-01

    As easy to read as a home pregnancy test, three Quantifiable Lateral Flow Assay (QLFA) strips used to test water for E. coli show different results. The brightly glowing control line on the far right of each strip indicates that all three tests ran successfully. But the glowing test line on the middle left and bottom strips reveal their samples were contaminated with E. coli bacteria at two different concentrations. The color intensity correlates with concentration of contamination.

  19. Method of stripping metals from organic solvents

    DOEpatents

    Todd, Terry A.; Law, Jack D.; Herbst, R. Scott; Romanovskiy, Valeriy N.; Smirnov, Igor V.; Babain, Vasily A.; Esimantovski, Vyatcheslav M.

    2009-02-24

    A new method to strip metals from organic solvents in a manner that allows for the recycle of the stripping agent. The method utilizes carbonate solutions of organic amines with complexants, in low concentrations, to strip metals from organic solvents. The method allows for the distillation and reuse of organic amines. The concentrated metal/complexant fraction from distillation is more amenable to immobilization than solutions resulting from current practice.

  20. Strip of heat-recoverable articles

    SciTech Connect

    McLoughlin, R.H.; Kirkham, S.W.

    1985-01-29

    A strip of hollow heat-recoverable articles formed side-by-side by tear welding two lengths of polymeric material together at intervals so that individual articles may be torn off. A preferred method of making the strip involves cross-linking after the tear welding, heating the strip, and inflating the hollow articles to render them heat-recoverable by introducing pressure via an interconnecting passage formed for that purpose during the tear welding.

  1. Ammonia stripping of biologically treated liquid manure.

    PubMed

    Alitalo, Anni; Kyrö, Aleksis; Aura, Erkki

    2012-01-01

    A prerequisite for efficient ammonia removal in air stripping is that the pH of the liquid to be stripped is sufficiently high. Swine manure pH is usually around 7. At pH 7 (at 20°C), only 0.4% of ammonium is in ammonia form, and it is necessary to raise the pH of swine slurry to achieve efficient ammonia removal. Because manure has a very high buffering capacity, large amounts of chemicals are needed to change the slurry pH. The present study showed that efficient air stripping of manure can be achieved with a small amount of chemicals and without strong bases like NaOH. Slurry was subjected to aerobic biological treatment to raise pH before stripping. This facilitated 8 to 32% ammonia removal without chemical treatment. The slurry was further subjected to repeated cycles of stripping with MgO and Ca(OH)(2) additions after the first and second strippings, respectively, to raise slurry pH in between the stripping cycles. After three consecutive stripping cycles, 59 to 86% of the original ammonium had been removed. It was shown that the reduction in buffer capacity of the slurry was due to ammonia and carbonate removal during the stripping cycles.

  2. Bonded orthotropic strips with cracks

    NASA Technical Reports Server (NTRS)

    Delale, F.; Erdogan, F.

    1979-01-01

    The elastostatic problem for a nonhomogeneous plane which consists of two sets of periodically arranged dissimilar orthotropic strips is considered. It is assumed that the plane contains a series of collinear cracks perpendicular to the interfaces and is loaded in tension away from and perpendicular to the cracks. The problem of cracks fully imbedded into the homogeneous strips is considered. The singular behavior of the stresses for two special crack geometries is studied. The first is the case of a broken laminate in which the crack tips touch the interfaces. The second is the case of cracks crossing the interfaces. An interesting result found from the analysis of the latter is that for certain orthotropic material combinations the stress state at the point of intersection of a crack and an interface may be bounded whereas in isotropic materials at this point stresses are always singular. A number of numerical examples are worked out to separate the primary material parameters influencing the stress intensity factors and the powers of stress singularity, and to determine the trends regarding the influence of the secondary parameters. Some numerical results are given for the stress intensity factors in certain basic crack geometries and for typical material combinations.

  3. Erosion rills offset the efficacy of vegetated buffer strips to mitigate pesticide exposure in surface waters.

    PubMed

    Stehle, Sebastian; Dabrowski, James Michael; Bangert, Uli; Schulz, Ralf

    2016-03-01

    Regulatory risk assessment considers vegetated buffer strips as effective risk mitigation measures for the reduction of runoff-related pesticide exposure of surface waters. However, apart from buffer strip widths, further characteristics such as vegetation density or the presence of erosion rills are generally neglected in the determination of buffer strip mitigation efficacies. This study conducted a field survey of fruit orchards (average slope 3.1-12.2%) of the Lourens River catchment, South Africa, which specifically focused on the characteristics and attributes of buffer strips separating orchard areas from tributary streams. In addition, in-stream and erosion rill water samples were collected during three runoff events and GIS-based modeling was employed to predict losses of pesticides associated with runoff. The results show that erosion rills are common in buffer strips (on average 13 to 24 m wide) of the tributaries (up to 6.5 erosion rills per km flow length) and that erosion rills represent concentrated entry pathways of pesticide runoff into the tributaries during rainfall events. Exposure modeling shows that measured pesticide surface water concentrations correlated significantly (R(2)=0.626; p<0.001) with runoff losses predicted by the modeling approach in which buffer strip width was set to zero at sites with erosion rills; in contrast, no relationship between predicted runoff losses and in-stream pesticide concentrations were detected in the modeling approach that neglected erosion rills and thus assumed efficient buffer strips. Overall, the results of our study show that erosion rills may substantially reduce buffer strip pesticide retention efficacies during runoff events and suggest that the capability of buffer strips as a risk mitigation tool for runoff is largely overestimated in current regulatory risk assessment procedures conducted for pesticide authorization.

  4. Evaluation of radio-tracking and strip transect methods for determining foraging ranges of Black-Legged Kittiwakes

    USGS Publications Warehouse

    Ostrand, W.D.; Drew, G.S.; Suryan, R.M.; McDonald, L.L.

    1998-01-01

    We compared strip transect and radio-tracking methods of determining foraging range of Black-legged Kittiwakes (Rissa tridactyla). The mean distance birds were observed from their colony determined by radio-tracking was significantly greater than the mean value calculated from strip transects. We determined that this difference was due to two sources of bias: (1) as distance from the colony increased, the area of available habitat also increased resulting in decreasing bird densities (bird spreading). Consequently, the probability of detecting birds during transect surveys also would decrease as distance from the colony increased, and (2) the maximum distance birds were observed from the colony during radio-tracking exceeded the extent of the strip transect survey. We compared the observed number of birds seen on the strip transect survey to the predictions of a model of the decreasing probability of detection due to bird spreading. Strip transect data were significantly different from modeled data; however, the field data were consistently equal to or below the model predictions, indicating a general conformity to the concept of declining detection at increasing distance. We conclude that radio-tracking data gave a more representative indication of foraging distances than did strip transect sampling. Previous studies of seabirds that have used strip transect sampling without accounting for bird spreading or the effects of study-area limitations probably underestimated foraging range.

  5. Smooth Muscle Strips for Intestinal Tissue Engineering

    PubMed Central

    Walthers, Christopher M.; Lee, Min; Wu, Benjamin M.; Dunn, James C. Y.

    2014-01-01

    Functionally contracting smooth muscle is an essential part of the engineered intestine that has not been replicated in vitro. The purpose of this study is to produce contracting smooth muscle in culture by maintaining the native smooth muscle organization. We employed intact smooth muscle strips and compared them to dissociated smooth muscle cells in culture for 14 days. Cells isolated by enzymatic digestion quickly lost maturity markers for smooth muscle cells and contained few enteric neural and glial cells. Cultured smooth muscle strips exhibited periodic contraction and maintained neural and glial markers. Smooth muscle strips cultured for 14 days also exhibited regular fluctuation of intracellular calcium, whereas cultured smooth muscle cells did not. After implantation in omentum for 14 days on polycaprolactone scaffolds, smooth muscle strip constructs expressed high levels of smooth muscle maturity markers as well as enteric neural and glial cells. Intact smooth muscle strips may be a useful component for engineered intestinal smooth muscle. PMID:25486279

  6. Ultrasonic examination of JBK-75 strip material

    SciTech Connect

    Cook, K.V.; Cunningham, R.A. Jr.; Lewis, J.C.; McClung, R.W.

    1982-12-01

    An ultrasonic inspection system was assembled to inspect the JBK-75 stainless steel sheath material (for the Large Coil Project) for the Westinghouse-Airco superconducting magnet program. The mechanical system provided for handling the 180-kg (400-lb) coils of strip material (1.6 mm thick by 78 mm wide by 90 to 120 m long (0.064 by 3.07 in. by 300 to 400 ft)), feeding the strip through the ultrasonic inspection and cleaning stations, and respooling the coils. We inspected 54 coils of strip for both longitudinal and laminar flaws. Simulated flaws were used to calibrate both inspections. Saw-cut notches (0.28 mm deep (0.011 in., about 17% of the strip thickness)) were used to calibrate the longitudinal flaw inspections; 1.59-mm-diam (0.063-in.) flat-bottom holes drilled halfway through a calibration strip were used to calibrate the laminar flaw tests.

  7. Transfusion and blood donation in comic strips.

    PubMed

    Lefrère, Jean-Jacques; Danic, Bruno

    2013-07-01

    The representation of blood transfusion and donation of blood in the comic strip has never been studied. The comic strip, which is a relatively recent art, emerged in the 19th century before becoming a mass medium during the 20th century. We have sought, by calling on collectors and using the resources of Internet, comic strips devoted, wholly or in part, to the themes of transfusion and blood donation. We present some of them here in chronologic order, indicating the title, country of origin, year of publication, and names of authors. The theme of the superhero using transfusion to transmit his virtues or his powers is repeated throughout the 20th century in North American comic strips. More recently, comic strips have been conceived from the outset with a promotional aim. They perpetuate positive images and are directed toward a young readership, wielding humor to reduce the fear of venipuncture. Few comic strips denounce the abuse of the commercialization of products derived from the human body. The image of transfusion and blood donation given by the comic strips is not to be underestimated because their readership is primarily children, some of whom will become blood donors. Furthermore, if some readers are transfused during their lives, the impact of a memory more or less conscious of these childhood readings may resurface, both in hopes and in fears.

  8. A Strip Cell in Pyroelectric Devices.

    PubMed

    Siao, An-Shen; Chao, Ching-Kong; Hsiao, Chun-Ching

    2016-01-01

    The pyroelectric effect affords the opportunity to convert temporal temperature fluctuations into usable electrical energy in order to develop abundantly available waste heat. A strip pyroelectric cell, used to enhance temperature variation rates by lateral temperature gradients and to reduce cell capacitance to further promote the induced voltage, is described as a means of improving pyroelectric energy transformation. A precision dicing saw was successfully applied in fabricating the pyroelectric cell with a strip form. The strip pyroelectric cell with a high-narrow cross section is able to greatly absorb thermal energy via the side walls of the strips, thereby inducing lateral temperature gradients and increasing temperature variation rates in a thicker pyroelectric cell. Both simulation and experimentation show that the strip pyroelectric cell improves the electrical outputs of pyroelectric cells and enhances the efficiency of pyroelectric harvesters. The strip-type pyroelectric cell has a larger temperature variation when compared to the trenched electrode and the original type, by about 1.9 and 2.4 times, respectively. The measured electrical output of the strip type demonstrates a conspicuous increase in stored energy as compared to the trenched electrode and the original type, by of about 15.6 and 19.8 times, respectively. PMID:26999134

  9. A Strip Cell in Pyroelectric Devices

    PubMed Central

    Siao, An-Shen; Chao, Ching-Kong; Hsiao, Chun-Ching

    2016-01-01

    The pyroelectric effect affords the opportunity to convert temporal temperature fluctuations into usable electrical energy in order to develop abundantly available waste heat. A strip pyroelectric cell, used to enhance temperature variation rates by lateral temperature gradients and to reduce cell capacitance to further promote the induced voltage, is described as a means of improving pyroelectric energy transformation. A precision dicing saw was successfully applied in fabricating the pyroelectric cell with a strip form. The strip pyroelectric cell with a high-narrow cross section is able to greatly absorb thermal energy via the side walls of the strips, thereby inducing lateral temperature gradients and increasing temperature variation rates in a thicker pyroelectric cell. Both simulation and experimentation show that the strip pyroelectric cell improves the electrical outputs of pyroelectric cells and enhances the efficiency of pyroelectric harvesters. The strip-type pyroelectric cell has a larger temperature variation when compared to the trenched electrode and the original type, by about 1.9 and 2.4 times, respectively. The measured electrical output of the strip type demonstrates a conspicuous increase in stored energy as compared to the trenched electrode and the original type, by of about 15.6 and 19.8 times, respectively. PMID:26999134

  10. ALHAMBRA survey: morphological classification

    NASA Astrophysics Data System (ADS)

    Pović, M.; Huertas-Company, M.; Márquez, I.; Masegosa, J.; Aguerri, J. A. López; Husillos, C.; Molino, A.; Cristóbal-Hornillos, D.

    2015-03-01

    The Advanced Large Homogeneous Area Medium Band Redshift Astronomical (ALHAMBRA) survey is a photometric survey designed to study systematically cosmic evolution and cosmic variance (Moles et al. 2008). It employs 20 continuous medium-band filters (3500 - 9700 Å), plus JHK near-infrared (NIR) bands, which enable measurements of photometric redshifts with good accuracy. ALHAMBRA covers > 4 deg2 in eight discontinuous regions (~ 0.5 deg2 per region), of theseseven fields overlap with other extragalactic, multiwavelength surveys (DEEP2, SDSS, COSMOS, HDF-N, Groth, ELAIS-N1). We detect > 600.000 sources, reaching the depth of R(AB) ~ 25.0, and photometric accuracy of 2-4% (Husillos et al., in prep.). Photometric redshifts are measured using the Bayesian Photometric Redshift (BPZ) code (Benítez et al. 2000), reaching one of the best accuracies up to date of δz/z <= 1.2% (Molino et al., in prep.). To deal with the morphological classification of galaxies in the ALHAMBRA survey (Pović et al., in prep.), we used the galaxy Support Vector Machine code (galSVM; Huertas-Company 2008, 2009), one of the new non-parametric methods for morphological classification, specially useful when dealing with low resolution and high-redshift data. To test the accuracy of our morphological classification we used a sample of 3000 local, visually classified galaxies (Nair & Abraham 2010), moving them to conditions typical of our ALHAMBRA data (taking into account the background, redshift and magnitude distributions, etc.), and measuring their morphology using galSVM. Finally, we measured the morphology of ALHAMBRA galaxies, obtaining for each source seven morphological parameters (two concentration indexes, asymmetry, Gini, M20 moment of light, smoothness, and elongation), probability if the source belongs to early- or late-type, and its error. Comparing ALHAMBRA morph COSMOS/ACS morphology (obtained with the same method) we expect to have qualitative separation in two main morphological

  11. Retractable spiked barrier strip for law enforcement

    SciTech Connect

    Marts, D.J.; Barker, S.G.

    1995-03-01

    The Idaho National Engineering Laboratory has designed an laboratory tested a prototype retractable spiked barrier strip for law enforcement. The proposed system, which is ready for controlled field testing, expands the functionality of existing spiked barrier strips. A retractable barrier strip, one that can place the spikes in either the active (vertical) or passive (horizontal) position, would allow law enforcement personnel to lay the unobtrusive strip across a road far in advance of a fleeing vehicle. No damage occurs to passing vehicles until the spikes are activated, and that can be done from a safe distance and at a strategic location when the offending vehicle is close to the strip. The concept also allows the strips to be place safely across several roadways that are potential paths of a fleeing vehicle. Since they are not activated until needed, they are harmless to nonoffending vehicles. The laboratory tests conducted on the system indicate that it will puncture tires only when the spikes are rotated to the active position and is safe to travel over when the spikes are in the down position. The strip itself will not cause instability to a vehicle driving over it, nor is the strip disturbed or adversely affected by vehicles driving over it. The spikes can be quickly rotated between the active (vertical) and passive (horizontal) position. However, the laboratory tests have only demonstrated that the retractable spiked barrier strip can perform its intended function in a laboratory environment. Field tests are needed to finalize the design and develop the system into a functional law enforcement tool.

  12. Saving Energy Through Advanced Power Strips (Poster)

    SciTech Connect

    Christensen, D.

    2013-10-01

    Advanced Power Strips (APS) look just like ordinary power strips, except that they have built-in features that are designed to reduce the amount of energy used by many consumer electronics. There are several different types of APSs on the market, but they all operate on the same basic principle of shutting off the supply power to devices that are not in use. By replacing your standard power strip with an APS, you can signifcantly cut the amount of electricity used by your home office and entertainment center devices, and save money on your electric bill. This illustration summarizes the different options.

  13. Tin electroplating/stripping evaluation. Topical report

    SciTech Connect

    McHenry, M.R.

    1995-08-01

    An evaluation was conducted to determine possible replacement chemistries for electroplating and stripping of tin-lead. The driver for this project was two-fold. Our first goal dealt with hazardous waste reduction. It was desired to eliminate lead (a heavy metal) from the electroplating process and thiourea (a known carcinogen) from the stripping process. We also sought to reduce the cost of nonconformance (CONC) realized by this process in the form of rough plating, broken paths, poor solderability, and overetching. Three suppliers` tin chemistries were evaluated as replacements for electroplating and stripping of tin-lead. Based on preliminary testing, one chemistry was chosen, evaluated, and approved for production use.

  14. Instabilities and Solitons in Minimal Strips

    NASA Astrophysics Data System (ADS)

    Machon, Thomas; Alexander, Gareth P.; Goldstein, Raymond E.; Pesci, Adriana I.

    2016-07-01

    We show that highly twisted minimal strips can undergo a nonsingular transition, unlike the singular transitions seen in the Möbius strip and the catenoid. If the strip is nonorientable, this transition is topologically frustrated, and the resulting surface contains a helicoidal defect. Through a controlled analytic approximation, the system can be mapped onto a scalar ϕ4 theory on a nonorientable line bundle over the circle, where the defect becomes a topologically protected kink soliton or domain wall, thus establishing their existence in minimal surfaces. Demonstrations with soap films confirm these results and show how the position of the defect can be controlled through boundary deformation.

  15. High energy H- ion transport and stripping

    SciTech Connect

    Chou, W.; /Fermilab

    2005-05-01

    During the Proton Driver design study based on an 8 GeV superconducting RF H{sup -} linac, a major concern is the feasibility of transport and injection of high energy H{sup -} ions because the energy of H{sup -} beam would be an order of magnitude higher than the existing ones. This paper will focus on two key technical issues: (1) stripping losses during transport (including stripping by blackbody radiation, magnetic field and residual gases); (2) stripping efficiency of carbon foil during injection.

  16. Instabilities and Solitons in Minimal Strips.

    PubMed

    Machon, Thomas; Alexander, Gareth P; Goldstein, Raymond E; Pesci, Adriana I

    2016-07-01

    We show that highly twisted minimal strips can undergo a nonsingular transition, unlike the singular transitions seen in the Möbius strip and the catenoid. If the strip is nonorientable, this transition is topologically frustrated, and the resulting surface contains a helicoidal defect. Through a controlled analytic approximation, the system can be mapped onto a scalar ϕ^{4} theory on a nonorientable line bundle over the circle, where the defect becomes a topologically protected kink soliton or domain wall, thus establishing their existence in minimal surfaces. Demonstrations with soap films confirm these results and show how the position of the defect can be controlled through boundary deformation. PMID:27419593

  17. How a Curved Elastic Strip Opens

    NASA Astrophysics Data System (ADS)

    Barois, Thomas; Tadrist, Loïc; Quilliet, Catherine; Forterre, Yoël

    2014-11-01

    An elastic strip is transversely clamped in a curved frame. The induced curvature decreases as the strip opens and connects to its flat natural shape. Various ribbon profiles are measured and the scaling law for the opening length validates a description where the in-plane stretching gradually relaxes the bending stress. An analytical model of the strip profile is proposed and a quantitative agreement is found with both experiments and simulations of the plates equations. This result provides a unique illustration of smooth nondevelopable solutions in thin sheets.

  18. Nonlocality in deuteron stripping reactions.

    PubMed

    Timofeyuk, N K; Johnson, R C

    2013-03-15

    We propose a new method for the analysis of deuteron stripping reactions, A(d,p)B, in which the nonlocality of nucleon-nucleus interactions and three-body degrees of freedom are accounted for in a consistent way. The model deals with equivalent local nucleon potentials taken at an energy shifted by ∼40  MeV from the "E(d)/2" value frequently used in the analysis of experimental data, where E(d) is the incident deuteron energy. The "E(d)/2" rule lies at the heart of all three-body analyses of (d, p) reactions performed so far with the aim of obtaining nuclear structure properties such as spectroscopic factors and asymptotic normalization coefficients that are crucial for our understanding of nuclear shell evolution in neutron- and proton-rich regions of the nuclear periodic table and for predicting the cross sections of stellar reactions. The large predicted shift arises from the large relative kinetic energy of the neutron and proton in the incident deuteron in those components of the n+p+A wave function that dominate the (d, p) reaction amplitude. The large shift reduces the effective d-A potentials and leads to a change in predicted (d, p) cross sections, thus affecting the interpretation of these reactions in terms of nuclear structure. PMID:25166525

  19. A video strip chart program

    SciTech Connect

    Jones, N.L.

    1994-12-31

    A strip chart recorder has been utilized for trend analysis of the Oak Ridge National Laboratory EN tandem since 1987. At the EN, the author could not afford the nice eight channel thermal pen recorder that was used at the 25 URC. He had to suffice with two channel fiber tip or capillary pen type recorders retrieved from salvage and maintained with parts from other salvaged recorders. After cycling through several machines that eventually became completely unserviceable, a search for a new thermal recorder was begun. As much as he hates to write computer code, he decided to try his hand at getting an old data acquisition unit, that had been retrieved several years ago from salvage, to meet his needs. A BASIC language compiler was used because time was not available to learn a more advanced language. While attempting to increase acquisition and scroll speed on the 6 MHz 80286 that the code was first developed on, it became apparent that scrolling only the first small portion of the screen at high speed and then averaging that region and histogramming the average provided both the speed necessary for capturing fairly short duration events, and a trend record without use of back scrolling and disk storage routines. This turned out to be quite sufficient.

  20. Air stripping of aqueous solutions. Engineering bulletin

    SciTech Connect

    Not Available

    1991-10-01

    Air stripping is a means to transfer contaminants from aqueous solutions to air. Contaminants are not destroyed by air stripping but are physically separated from the aqueous solutions. Contaminant vapors are transferred into the air stream and, if necessary, can be treated by incineration, adsorption, or oxidation. Most frequently, contaminants are collected in carbon adsorption systems and then treated or destroyed in this concentrated form. The concentrated contaminants may be recovered, incinerated for waste heat recovery, or destroyed by other treatment technologies. Generally, air stripping is used as one in a series of unit operations and can reduce the overall cost for managing a particular site. Air stripping is applicable to volatile and semivolatile organic compounds. It is not applicable for treating metals and inorganic compounds. The bulletin provides information on the technology applicability, the technology limitations, a description of the technology, the types of residuals produced, site requirements, the latest performance data, the status of the technology, and sources of further information.

  1. Ram Pressure Stripping: The Long Goodbye

    NASA Astrophysics Data System (ADS)

    Tonnesen, Stephanie; Lu, Yu; Benson, Andrew; Peter, Annika; Boylan-Kolchin, Michael; Wetzel, Andrew R.; Weisz, Daniel R.

    2016-01-01

    What turns off star formation in satellite galaxies? Ram pressure stripping, the removal of a galaxy's gas through direct interaction with the gas halo in which it orbits, is an attractive quenching mechanism, particularly in the Milky Way halo where the radial distribution of quenching is dramatic. However, many implementations of this process in semi-analytic models result in overly-rapid gas removal when compared with observations. We use high resolution hydrodynamical simulations run with Enzo to parameterize the stripping of disk and halo gas from an orbiting satellite galaxy for use in the semi-analytic modeling code Galacticus. We find that using the instantaneous ram pressure overestimates the amount of gas that is stripped, and present a physically-motivated module for including ram pressure stripping in semi-analytic models that uses the integral of the ram pressure experienced by a satellite galaxy. We will compare our results to observations of the Milky Way satellites.

  2. Fabrication of MMC Strip by CRB Process

    NASA Astrophysics Data System (ADS)

    Jamaati, Roohollah; Toroghinejad, Mohammad Reza

    2012-06-01

    In this study, Al/Al2O3 composite strips were produced by the cold roll bonding (CRB) process. Microhardness, tensile strength, and elongation of composite strips were investigated as a result of changes in thickness reduction, quantity of alumina particles, and the production method used. It was found that higher values of reduction and quantities of alumina improved microhardness and tensile strength but decreased elongation. Furthermore, as-received strips exhibited the highest values for microhardness and tensile strength but the lowest for elongation. In contrast, post-rolling annealed strips recorded the lowest values for microhardness and tensile strength but the highest for elongation. Finally, it was found that pre-rolling annealing was the best method for producing this composite via the CRB process.

  3. Technique for stripping Teflon insulated wire

    NASA Technical Reports Server (NTRS)

    Babb, B. D.

    1967-01-01

    Cryogenic stripping of Teflon insulated wire leaves no residue and produces no physical damage. After the wire is immersed in liquid nitrogen, bent slightly, and returned to room temperature, the Teflon is removed by fingernails or flat-nosed pliers.

  4. Topological insulators on a Mobius strip

    NASA Astrophysics Data System (ADS)

    Huang, Lang-Tao; Lee, Dung-Hai

    2011-11-01

    We study the two-dimensional Chern insulator and spin Hall insulator on a nonorientable Riemann surface, the Mobius strip, where the usual band-structure topological invariant is not defined. We show that while the flow pattern of edge currents can detect the twist of the Mobius strip in the case of Chern insulator, it can not do so for the spin Hall insulator.

  5. Topological insulators on a Mobius Strip

    NASA Astrophysics Data System (ADS)

    Huang, Lang-Tao; Lee, Dung-Hai

    2012-02-01

    We study the two dimensional Chern insulator and spin Hall insulator on a non-orientable Riemann surface, the Mobius strip, where the usual bandstructure topological invariant is not defined. We show that while the flow pattern of edge currents can detect the twist of the Mobius strip in the case of Chern insulator, it can not do so in spin Hall insulator [1]. [4pt] [1] Lang-Tao Huang and Dung-Hai Lee, Phys. Rev. B 84, 193106 (2011)

  6. Process development of thin strip steel casting

    SciTech Connect

    Sussman, R.C.; Williams, R.S.

    1990-12-01

    An important new frontier is being opened in steel processing with the emergence of thin strip casting. Casting steel directly to thin strip has enormous benefits in energy savings by potentially eliminating the need for hot reduction in a hot strip mill. This has been the driving force for numerous current research efforts into the direct strip casting of steel. The US Department of Energy initiated a program to evaluate the development of thin strip casting in the steel industry. In earlier phases of this program, planar flow casting on an experimental caster was studied by a team of engineers from Westinghouse Electric corporation and Armco Inc. A subsequent research program was designed as a fundamental and developmental study of both planar and melt overflow casting processes. This study was arranged as several separate and distinct tasks which were often completed by different teams of researchers. An early task was to design and build a water model to study fluid flow through different designs of planar flow casting nozzles. Another important task was mathematically modeling of melt overflow casting process. A mathematical solidification model for the formation of the strip in the melt overflow process was written. A study of the material and conditioning of casting substrates was made on the small wheel caster using the melt overflow casting process. This report discusses work on the development of thin steel casting.

  7. Automated Laser Paint Stripping (ALPS) update

    NASA Astrophysics Data System (ADS)

    Lovoi, Paul

    1993-03-01

    To date, the DoD has played a major role in funding a number of paint stripping programs. Some technologies have proven less effective than contemplated. Others are still in the validation phase. Paint stripping is one of the hottest issues being addressed by the finishing industry since the Environmental Protection Agency (EPA) has mandated that chemical stripping using methylene chloride/phenolic type strippers be stopped. The DoD and commercial aircraft companies are hard-pressed to find an alternative. Automated laser paint stripping has been identified as a technique for removing coatings from aircraft surfaces. International Technical Associates (InTA) was awarded a Navy contract for an automated laser paint stripping system (ALPS) that will remove paint from metallic and composite substrates. For the program, which will validate laser paint stripping, InTA will design, build, test, and install a system for fighter-sized aircraft at both the Norfolk and North Island (San Diego) Aviation Depots.

  8. Methylene chloride exposure in furniture-stripping shops: ventilation and respirator use practices.

    PubMed

    Hall, A H; Rumack, B H

    1990-01-01

    Four cases of serious methylene chloride (dichloromethane) poisoning, including fatalities, in small-scale furniture-stripping shops were reported to the Rocky Mountain Poison and Drug Center between 1984 and 1988. Adequate ventilation systems and use of recommended respirators may seem impractical or overly expensive to the operators of such shops. Twenty-one shops in the metropolitan Denver, Colorado area were surveyed. A half-facepiece respirator with organic vapor cartridges was worn at least part-time in 14 of 21 shops; none was worn in 7. In 10 of 21 shops, workers had experienced dizziness, headache, or nausea when stripping furniture. Current safety practices in small-scale furniture-stripping shops may be inadequate to keep methylene chloride exposure levels in compliance with latest recommendations, and serious or fatal overexposure can occur.

  9. Anodic Stripping Voltammetry of Silver Nanoparticles: Aggregation Leads to Incomplete Stripping

    PubMed Central

    Cloake, Samantha J; Toh, Her Shuang; Lee, Patricia T; Salter, Chris; Johnston, Colin; Compton, Richard G

    2015-01-01

    The influence of nanoparticle aggregation on anodic stripping voltammetry is reported. Dopamine-capped silver nanoparticles were chosen as a model system, and melamine was used to induce aggregation in the nanoparticles. Through the anodic stripping of the silver nanoparticles that were aggregated to different extents, it was found that the peak area of the oxidative signal corresponding to the stripping of silver to silver(I) ions decreases with increasing aggregation. Aggregation causes incomplete stripping of the silver nanoparticles. Two possible mechanisms of ‘partial oxidation’ and ‘inactivation’ of the nanoparticles are proposed to account for this finding. Aggregation effects must be considered when anodic stripping voltammetry is used for nanoparticle detection and quantification. Hence, drop casting, which is known to lead to aggregation, is not encouraged for preparing electrodes for analytical purposes. PMID:25861566

  10. Mastering Interproximal Stripping: With Innovations in Slenderization

    PubMed Central

    Shrivastav, Sunita S; Hazarey, Pushpa V

    2012-01-01

    ABSTRACT Crowding and irregularity remain a consistent problem for children. Management of space problems continues to play an important role in a dental practice. It also represents an area of major interaction between the primary provider and the specialists. Proximal stripping is routinely carried out to avoid extraction in borderline cases where space discrepancy is less and in cases where there is a discrepancy between the mesio- distal width of maxillary and mandibular teeth to satisfy Bolton ratio. Proximal stripping is carried out using of metallic abrasive strip, safe sided carborundum disk, or with long thin tapered fissure burs with air rotor. The use of rotary cutting instrument can harm the pulp by exposure of mechanical vibration and heat generation (in some cases). Whereas, the large diameter of the disk obstructs vision of the working area. Also fracturing away a portion is a common problem with disk. Tapered fissure burs cut the tooth structure as the width of bur or overcutting may occur of the tooth structure due to high speed. The use of metallic abrasive strip is the safest procedure amongst the above. The strip can be placed in the anterior region without any difficulty but using it in the posterior region is difficult as, it is difficult to hold it with fingers while stripping the posterior teeth. To avoid this inconvenience here with a simple and economical way of fabricating strip holder from routine lab material is presented. Clinical implications: Proper management of space in the primary and mixed dentitions can prevent unnecessary loss in arch length. Diagnosing and treating space problems requires an understanding of the etiology of crowding and the development of the dentition to render treatment for the mild, moderate and severe crowding cases. Most crowding problems with less than 4.5 mm can be resolved through preservation of the leeway space, regaining space or limited expansion in the late mixed dentition. In cases with 5 to 9 mm

  11. Superconducting nano-strip particle detectors

    NASA Astrophysics Data System (ADS)

    Cristiano, R.; Ejrnaes, M.; Casaburi, A.; Zen, N.; Ohkubo, M.

    2015-12-01

    We review progress in the development and applications of superconducting nano-strip particle detectors. Particle detectors based on superconducting nano-strips stem from the parent devices developed for single photon detection (SSPD) and share with them ultra-fast response times (sub-nanosecond) and the ability to operate at a relatively high temperature (2-5 K) compared with other cryogenic detectors. SSPDs have been used in the detection of electrons, neutral and charged ions, and biological macromolecules; nevertheless, the development of superconducting nano-strip particle detectors has mainly been driven by their use in time-of-flight mass spectrometers (TOF-MSs) where the goal of 100% efficiency at large mass values can be achieved. Special emphasis will be given to this case, reporting on the great progress which has been achieved and which permits us to overcome the limitations of existing mass spectrometers represented by low detection efficiency at large masses and charge/mass ambiguity. Furthermore, such progress could represent a breakthrough in the field. In this review article we will introduce the device concept and detection principle, stressing the peculiarities of the nano-strip particle detector as well as its similarities with photon detectors. The development of parallel strip configuration is introduced and extensively discussed, since it has contributed to the significant progress of TOF-MS applications.

  12. Bimetallic strip for low temperature use

    DOEpatents

    Bussiere, Jean F.; Welch, David O.; Suenaga, Masaki

    1981-01-01

    There is provided a class of mechanically pre-stressed structures, suitably bi-layer strips comprising a layer of group 5 transition metals in intimate contact with a layer of an intermetallic compound of said transition metals with certain group 3A, 4A or 5A metals or metalloids suitably gallium, indium, silicon, germanium, tin, arsenic or antimony. The changes of Young's modulus of these bi-layered combinations at temperatures in the region of but somewhat above absolute zero provides a useful means of sensing temperature changes. Such bi-metallic strips may be used as control strips in thermostats, in direct dial reading instruments, or the like. The structures are made by preparing a sandwich of a group 5B transition metal strip between the substantially thicker strips of an alloy between copper and a predetermined group 3A, 4A or 5A metal or metalloid, holding the three layers of the sandwich in intimate contact heating the same, cooling the same and removing the copper alloy and then removing one of the two thus formed interlayer alloys between said transition metal and the metal previously alloyed with copper.

  13. Domain Wall structures in wide permalloy strips

    NASA Astrophysics Data System (ADS)

    Estevez, Virginia; Laurson, Lasse

    2015-03-01

    We analyze numerically the equilibrium micromagnetic domain wall structures encountered in Permalloy strips of a wide range of thicknesses and widths, with strip widths up to several micrometers. By performing an extensive set of micromagnetic simulations, we show that the equilibrium phase diagram of the domain wall structures exhibits in addition to the previously found structures (symmetric and asymmetric transverse wall and vortex wall) also a double-vortex domain wall for large enough strip widths and thicknesses. In general, shape anisotropy is less important for wider strips, and thus energy minima with more complex spin structures closing the flux more efficiently than those found before for narrow strips may appear. Also several metastable domain wall structures are found, such as structures with three or four vortices or two vortices and an antivortex. We discuss the details of the relaxation process, including the effect of varying the magnitude of the Gilbert damping constant, and the role of using different initial conditions. Finally, we also consider the field-driven dynamics of the double-vortex domain wall.

  14. ERTS-1 data applied to strip mining

    NASA Technical Reports Server (NTRS)

    Anderson, A. T.; Schubert, J.

    1976-01-01

    Two coal basins within the western region of the Potomac River Basin contain the largest strip-mining operations in western Maryland and West Virginia. The disturbed strip-mine areas were delineated along with the surrounding geological and vegetation features by using ERTS-1 data in both analog and digital form. The two digital systems employed were (1) the ERTS analysis system, a point-by-point digital analysis of spectral signatures based on known spectral values and (2) the LARS automatic data processing system. These two systems aided in efforts to determine the extent and state of strip mining in this region. Aircraft data, ground-verification information, and geological field studies also aided in the application of ERTS-1 imagery to perform an integrated analysis that assessed the adverse effects of strip mining. The results indicated that ERTS can both monitor and map the extent of strip mining to determine immediately the acreage affected and to indicate where future reclamation and revegetation may be necessary.

  15. Spray Rolling Aluminum Strip for Transportation Applications

    SciTech Connect

    Kevin M. McHugh; Y. Lin; Y. Zhou; E. J. Lavernia; J.-P. Delplanque; S. B. Johnson

    2005-02-01

    Spray rolling is a novel strip casting technology in which molten aluminum alloy is atomized and deposited into the roll gap of mill rolls to produce aluminum strip. A combined experimental/modeling approach has been followed in developing this technology with active participation from industry. The feasibility of this technology has been demonstrated at the laboratory scale and it is currently being scaled-up. This paper provides an overview of the process and compares the microstructure and properties of spray-rolled 2124 aluminum alloy with commercial ingot-processed material

  16. Validation of the Hot Strip Mill Model

    SciTech Connect

    Richard Shulkosky; David Rosberg; Jerrud Chapman

    2005-03-30

    The Hot Strip Mill Model (HSMM) is an off-line, PC based software originally developed by the University of British Columbia (UBC) and the National Institute of Standards and Technology (NIST) under the AISI/DOE Advanced Process Control Program. The HSMM was developed to predict the temperatures, deformations, microstructure evolution and mechanical properties of steel strip or plate rolled in a hot mill. INTEG process group inc. undertook the current task of enhancing and validating the technology. With the support of 5 North American steel producers, INTEG process group tested and validated the model using actual operating data from the steel plants and enhanced the model to improve prediction results.

  17. Grain size control of rhenium strip

    NASA Technical Reports Server (NTRS)

    Schuster, Gary B.

    1991-01-01

    Ensuring the desired grain size in the pure Re strip employed by the SP-100 space nuclear reactor design entails the establishment of an initial grain size in the as-received strip and the avoidance of excessive grain growth during subsequent fabrication. Pure Re tapered tensile specimens have been fabricated and tested in order to quantify the effects of grain-boundary migration. Grain size could be rendered fine and uniform by means of a rolling procedure that uses rather large reductions between short intermediate anneals. The critical strain regime varies inversely with annealing temperature.

  18. Electrostatics of crossed arrays of strips.

    PubMed

    Danicki, Eugene

    2010-07-01

    The BIS-expansion method is widely applied in analysis of SAW devices. Its generalization is presented for two planar periodic systems of perfectly conducting strips arranged perpendicularly on both sides of a dielectric layer. The generalized method can be applied in the evaluation of capacitances of strips on printed circuits boards and certain microwave devices, but primarily it may help in evaluation of 2-D piezoelectric sensors and actuators, with row and column addressing their elements, and also piezoelectric bulk wave resonators. PMID:20639164

  19. BHZ model edge states on Mobius strip

    NASA Astrophysics Data System (ADS)

    Mogni, Christopher; Vakaryuk, Victor; Tchernyshyov, Oleg

    2014-03-01

    We present analytical edge state solutions to the Bernevig-Hughes-Zhang (BHZ) model of a quantum spin hall topological insulator with Mobius geometry. The edge state solutions are obtained by solving the differential equations governing the BHZ model. The edge states satisfy both inverted periodic boundary conditions and single-valuedness boundary conditions. Furthermore, we develop a classification of boundary conditions compatible with the BHZ model insulator with Mobius geometry. We demonstrate that in the limit of large strip length that there exists a finite energy gap between the edge states. This energy gap does not exist for strips with periodic boundary conditions.

  20. ENGINEERING BULLETIN: AIR STRIPPING OF AQUEOUS SOLUTIONS

    EPA Science Inventory

    Air striding is a means to transfer contaminants from aqueous solutions to air. ontaminants are not destroyed by air stripping but are physically separated from the aqueous solutions. ontaminant vapors are transferred into the air stream and, if necessary, can be treated by incin...

  1. Air stripping of organics from groundwater

    SciTech Connect

    Harrison, D.P.; Valsaraj, K.T.; Wetzel, D.M. . Dept. of Chemical Engineering)

    1993-01-01

    As awareness of the problem of contaminated ground water increases, the demand for reliable and cost-effective treatment processes will also increase. Although a number of treatment options exist or are under development, air stripping using counter current flow in packed columns is the current technology of choice in many situations. This paper reviews the basic principles of packed-column design and defines the limits of counter current contacting when applied to situations in which the resistance to mass transfer in the gas phase is important. The cascade crossflow configuration allows water and air flow to be varied independently, providing added design flexibility. Reductions in pressure drop by as much as two orders of magnitude result in stable column operation at air and water flow rates which would cause flooding in a counter current column. Mass transfer efficiencies comparable to, and in some cases greater than, counter current operation have been measured. Experimental results for cascade crossflow air stripping of 1,2-dichloroethane and methyl ethyl ketone are presented. The gas-phase, mass-transfer resistance is important for both compounds due to their small Henry's constants, 1,2-dichloroethane is considered to be difficult to strip using counter current contacting, while high efficiency air stripping of methyl ethyl ketone is impractical at ambient temperature.

  2. Hexahedron Projection by Triangle Fans and Strips

    2007-05-10

    The program divides the projection of a hexahedron with not-necessarily-planar quadrilateral faces, such as would arise in a curvilinear grid, by the projections of its edges, into polygons overlapped by a single front-facing and a single back-facing face. These polygons are further organized into triangle strips and fans, for rapid volume rendering in graphics hardware.

  3. Strip edge cracking simulation in cold rolling

    SciTech Connect

    Hubert, C.; Dubar, L.; Dubar, M.; Dubois, A.

    2011-01-17

    This research work focuses on a specific defect which occurs during cold rolling of steel strips: edge-serration. Investigations on the industrial processes have led to the conclusion that this defect is the result of the edge-trimming and cold rolling sequences. The aim of this research work is to analyze the effect of the cutting process and the cold rolling on cracks occurrence, especially on strip edges.This study is performed using an experimental testing stand called Upsetting Rolling Test (URT). It allows to reproduce cold rolling contact parameters such as forward slip, reduction ratio and friction coefficients. Specimens sampled near trimmed industrial strip edges are deformed using the URT stand. Two sets of specimens with different stress states, obtained by annealing, are submitted to two reduction passes with extreme forward slips.Scanning electron microscopy observations added to 3D optical surface profiler topographies show that on one hand, forward slip has a major effect on cracks opening. On the other hand, cracks opening decreases according to high roll strip speed gradient. Concerning the heat-treated specimens, no crack appeared after all reduction passes, showing a large influence of the cutting process and consequently of the local stress state in the vicinity of the burnish and fracture regions.

  4. Cardiac Muscle Studies with Rat Ventricular Strips

    ERIC Educational Resources Information Center

    Whitten, Bert K.; Faleschini, Richard J.

    1977-01-01

    Details undergraduate physiology laboratory experiments that demonstrate mechanical properties of cardiac muscle, using strips from the ventricle of a rat heart. Includes procedures for obtaining length-tension curves, demonstrating the role of calcium in excitation-contraction coupling, and showing effects of several cardiovascular drugs…

  5. Single-sided CZT strip detectors

    NASA Astrophysics Data System (ADS)

    Macri, John R.; Dönmez, Burçin; Widholm, Mark; Hamel, Louis-Andre; Julien, Manuel; Narita, Tomohiko; Ryan, James M.; McConnell, Mark L.

    2004-09-01

    We report progress in the study of thick CZT strip detectors for 3-d imaging and spectroscopy and discuss two approaches to device design. We present the spectroscopic, imaging, detection efficiency and response uniformity performance of prototype devices. Unlike double-sided strip detectors, these devices feature both row and column contacts implemented on the anode surface. This electron-only approach circumvents problems associated with poor hole transport in CZT that normally limit the thickness and energy range of double-sided strip detectors. These devices can achieve similar performance to pixel detectors. The work includes laboratory and simulation studies aimed at developing compact, efficient, detector modules for 0.05 to 1 MeV gamma radiation measurements. The low channel count strip detector approach can significantly reduce the complexity and power requirements of the readout electronics. This is particularly important in space-based coded aperture or Compton telescope instruments requiring large area, large volume detector arrays. Such arrays will be required for NASA's Black Hole Finder Probe (BHFP) and Advanced Compton Telescope (ACT).

  6. Nanoscale Test Strips for Multiplexed Blood Analysis

    NASA Technical Reports Server (NTRS)

    Chan, Eugene

    2015-01-01

    A critical component of the DNA Medicine Institute's Reusable Handheld Electrolyte and Lab Technology for Humans (rHEALTH) sensor are nanoscale test strips, or nanostrips, that enable multiplexed blood analysis. Nanostrips are conceptually similar to the standard urinalysis test strip, but the strips are shrunk down a billionfold to the microscale. Each nanostrip can have several sensor pads that fluoresce in response to different targets in a sample. The strips carry identification tags that permit differentiation of a specific panel from hundreds of other nanostrip panels during a single measurement session. In Phase I of the project, the company fabricated, tested, and demonstrated functional parathyroid hormone and vitamin D nanostrips for bone metabolism, and thrombin aptamer and immunoglobulin G antibody nanostrips. In Phase II, numerous nanostrips were developed to address key space flight-based medical needs: assessment of bone metabolism, immune response, cardiac status, liver metabolism, and lipid profiles. This unique approach holds genuine promise for space-based portable biodiagnostics and for point-of-care (POC) health monitoring and diagnostics here on Earth.

  7. 33 CFR 157.128 - Stripping system.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ...; or (2) Any other means accepted by the Commandant. (c) Each stripping system must have at least one...) A pressure gauge at the discharge connection to the pump. (2) At least one of the following... pressure gauge at each driving fluid intake and at each discharge; and (2) A pressure/vacuum gauge at...

  8. 33 CFR 157.128 - Stripping system.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ...: (1) In the stripping system piping: (i) A pressure gauge at the inlet connection to the pump; and (ii) A pressure gauge at the discharge connection to the pump. (2) At least one of the following... pressure gauge at each driving fluid intake and at each discharge; and (2) A pressure/vacuum gauge at...

  9. Topics in Chemical Instrumentation: CII. Automated Anodic Stripping Voltammetry.

    ERIC Educational Resources Information Center

    Stock, John T.; Ewing, Galen W., Ed.

    1980-01-01

    Presents details of anodic stripping analysis (ASV) in college chemistry laboratory experiments. Provides block diagrams of the analyzer system, circuitry and power supplies of the automated stripping analyzer, and instructions for implementing microcomputer control of the ASV. (CS)

  10. Dry stripping as a surface treatment method

    NASA Astrophysics Data System (ADS)

    Nieminen, Ilkka

    1992-03-01

    High environmental and safety standards as well as use of new paint and substrate materials have created the need for developing stripping methods to substitute chemical and mechanical methods and on the other hand for expanding the applicability of blasting as a surface treatment. Plastic Media Blasting (PMB) (alternatively Dry Stripping System (DSS)) is an emerging technology first used in aircraft maintenance for paint stripping. Traditionally this task is performed by brushing and grinding or by using chemical solvents. With plastic media it is possible to remove thick paints with high adhesion without damaging the substrate and even layer by layer. If suitable type of plastic media, blasting pressure low enough, media concentration high enough and on the other right blasting time, blasting distance and blasting angle are chosen, the effectiveness of PMB can be varied to a large extent. In regard to the hardness of media plastic particles are situated between some organic materials and shots used in sand blasting. Therefore composite materials can be treated without damaging the substrate or thin metal plates without causing any deformations. The principle of plastic media blasting equipment is similar to traditional blasting equipment. Nevertheless the properties of plastic media are different to harder particles used in shot peening resulting in higher demands for filtration, ventilation and recycling systems. In addition the facilities have to contain proper recovery equipment, because plastic media can be reused, even 20 times. In recycling systems plastic media is cleaned, too large and too small particles are removed, hard and magnetic particles are removed from reusable media and dust is separated from media. In addition to paint stripping PMB can successfully be used for cleaning of surfaces from contamination and to some extent for polishing, grinding and roughening. Paint stripping has been the main application so far, but there may be many other

  11. Refuges, flower strips, biodiversity and agronomic interest.

    PubMed

    Roy, Grégory; Wateau, Karine; Legrand, Mickaël; Oste, Sandrine

    2008-01-01

    Several arthropods are natural predators of pests, and they are able to reduce and control their population development. FREDON Nord Pas-de-Calais (Federation Regionate de Defense contre les Organismes Nuisibles = Regional Federation for Pest Control) has begun for a long time to form farmers to the recognition of beneficial arthropods and to show them their usefulness. These beneficial insects or arachnids are present everywhere, in orchards and even in fields which are areas relatively poor in biodiversity. Adults feed in the flower strips instead larvae and some adults feed on preys such as aphids or caterpillars. Most of the time, beneficial insects can regulate pest but sometimes, in agricultural area, they can't make it early enough and efficiently. Their action begin too late and there biodiversity and number are too low. It's possible to enhance their action by manipulating the ecological infrastructures, like sewing flower strips or installing refuges. Flower strips increase the density of natural enemies and make them be present earlier in the field in order to control pests. Refuges permit beneficial's to spend winter on the spot. So they're able to be active and to grow in number earlier. From 2004 to 2007, on the one hand, FREDON Nord Pas-de-Calais has developed a research program. Its purpose was to inventory practices and also tools and means available and to judge the advisability of using such or such beneficial refuge in orchards. On the second hand, it studied the impact in orchard of refuges on population of beneficial's and the difference there were between manufactured refuges and homemade refuges. Interesting prospects were obtained with some of them. Otherwise, since 2003, FREDON has studied flower strips influence on beneficial population and their impact on pest control. In cabbage fields, results of trials have shown that flower strips lead to a reduction of aphid number under acceptable economic level, up to 50 meters from flower strips

  12. Air stripping. (Latest citations from the NTIS database). Published Search

    SciTech Connect

    Not Available

    1993-04-01

    The bibliography contains citations concerning the application of air stripping techniques to water treatment, including groundwater decontamination and wastewater purification. The advantages and disadvantages of air stripping over other water treatment processes are discussed. Cleanup of the organic emissions generated by air stripping is also considered. The primary applications of air stripping are in groundwater and soil cleanup. (Contains a minimum of 71 citations and includes a subject term index and title list.)

  13. Fracture of composite plates containing periodic buffer strips

    NASA Technical Reports Server (NTRS)

    Erdogan, F.; Bakioglu, M.

    1974-01-01

    Fracture of a composite plate which consists of perfectly bonded parallel load carrying laminates and buffer strips is considered. Fatigue cracks appear and spread in main laminates or in buffer strips or in both perpendicular to the interfaces. The external load is applied to the plate parallel to the strips and away from the crack region. The problem is solved for fully imbedded cracks and for broken laminates or strips. Corresponding stress intensity factors are calculated.

  14. Study the Z-Plane Strip Capacitance

    SciTech Connect

    Parikh, H.; Swain, S.; /SLAC

    2005-12-15

    The BaBaR detector at the Stanford Linear Accelerator Center is currently undergoing an upgrade to improve its muon and neutral hadron detection system. The Resistive Plate Chambers (RPCs) that had been used till now have deteriorated in performance over the past few years and are being replaced by Limited Streamer Tube (LSTs). Each layer of the system consists of a set of up to 10 streamer tube modules which provide one coordinate ({phi} coordinate) and a single ''Z-plane'' which provides the Z coordinate of the hit. The large area Z-planes (up to 12m{sup 2}) are 1mm thick and contain 96 copper strips that detect the induced charge from avalanches created in the streamer tube wires. All the Z-planes needed for the upgrade have already been constructed, but only a third of the planes were installed last summer. After installing the 24 Z-planes last year, it was learned that 0.7% of the strips were dead when put inside the detector. This was mainly due to the delicate solder joint between the read-out cable and the strip, and since it is difficult to access or replace the Z-planes inside the detector, it is very important to perform various tests to make sure that the Z-planes will be efficient and effective in the long term. We measure the capacitance between the copper strips and the ground plane, and compare it to the theoretical value that we expect. Instead of measuring the capacitance channel by channel, which would be a very tedious job, we developed a more effective method of measuring the capacitance. Since all the Z-planes were built at SLAC, we also built a smaller 46 cm by 30 cm Z-plane with 12 strips just to see how they were constructed and to gain a better understanding about the solder joints.

  15. Economic evaluation of air stripping to remove volatile organic compounds from water. Final report

    SciTech Connect

    Zaghloul, H.H.; Ball, R.O.; Maloney, S.W.

    1987-12-01

    This report documents the results of a study conducted to provide a basis for estimating the costs of installing and using air stripping to remove volatile organic compounds (VOCs) from water. The air-stripping technology was found to be a very economical and efficient method for contaminant removal. The technology is simple, relatively inexpensive to install, and has low labor and maintenance requirements. VOC removal rates range from 90 to 99.99%. Estimated costs, in terms of percentage of total production costs, were found to be 40% for capital costs, 50% for operational costs, and 10% for maintenance costs, according to literature sources. Results of a survey conducted during this study generally agree with these percentages, except that maintenance costs reported on the survey were lower due to the highly automated nature of new installations.

  16. Evaluation of strips of centipede grass for sediment load reduction.

    PubMed

    Shiono, Takahiro; Haraguchi, Noburo; Miyamoto, Kuniaki; Shinogi, Yoshiyuki; Miyamoto, Teruhito; Kameyama, Koji

    2008-01-01

    Reddish sediment runoff from agricultural fields results in coastal environmental problems in Okinawa, Japan. Recent studies have demonstrated the effectiveness of strips of centipede grass (Eremochloa ophiuroides (Munro) Hack.), a perennial turf grass, in reducing the sediment loads from farmlands. However, sufficient information has not been provided to determine the appropriate strip specifications in the grass strip design. This study evaluated centipede grass strips for reduction of reddish sediment runoff from farmlands in Okinawa, Japan. A numerical model simulating the reddish sediment transport in the grass strip was constructed to determine the sediment removal efficiency of the strip. The model was verified using data obtained from field plot experiments with the grass strips under natural conditions. The sensitivity analysis of the model showed that the length of the grass strip (i.e. the dimension of the strip in the direction of flow) and unit inflow discharge have a great effect on sediment removal efficiency. The sediment removal efficiency obtained from the model simulation increased with the length of the strip and the increment of the efficiency decreased with the length of the strip. Therefore, these results indicate that the effective and efficient length of a centipede grass strip is 3 m for the reduction of reddish sediment loads under typical farmland conditions in Okinawa.

  17. 21 CFR 880.2200 - Liquid crystal forehead temperature strip.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 21 Food and Drugs 8 2010-04-01 2010-04-01 false Liquid crystal forehead temperature strip. 880... Personal Use Monitoring Devices § 880.2200 Liquid crystal forehead temperature strip. (a) Identification. A liquid crystal forehead temperature strip is a device applied to the forehead that is used to...

  18. 21 CFR 880.2200 - Liquid crystal forehead temperature strip.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... 21 Food and Drugs 8 2013-04-01 2013-04-01 false Liquid crystal forehead temperature strip. 880... Personal Use Monitoring Devices § 880.2200 Liquid crystal forehead temperature strip. (a) Identification. A liquid crystal forehead temperature strip is a device applied to the forehead that is used to...

  19. 21 CFR 880.2200 - Liquid crystal forehead temperature strip.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... 21 Food and Drugs 8 2011-04-01 2011-04-01 false Liquid crystal forehead temperature strip. 880... Personal Use Monitoring Devices § 880.2200 Liquid crystal forehead temperature strip. (a) Identification. A liquid crystal forehead temperature strip is a device applied to the forehead that is used to...

  20. 21 CFR 880.2200 - Liquid crystal forehead temperature strip.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... 21 Food and Drugs 8 2014-04-01 2014-04-01 false Liquid crystal forehead temperature strip. 880... Personal Use Monitoring Devices § 880.2200 Liquid crystal forehead temperature strip. (a) Identification. A liquid crystal forehead temperature strip is a device applied to the forehead that is used to...

  1. 21 CFR 880.2200 - Liquid crystal forehead temperature strip.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... 21 Food and Drugs 8 2012-04-01 2012-04-01 false Liquid crystal forehead temperature strip. 880... Personal Use Monitoring Devices § 880.2200 Liquid crystal forehead temperature strip. (a) Identification. A liquid crystal forehead temperature strip is a device applied to the forehead that is used to...

  2. Conveyorized Photoresist Stripping Replacement for Flex Circuit Fabrication

    SciTech Connect

    Megan Donahue

    2009-02-24

    A replacement conveyorized photoresist stripping system was characterized to replace the ASI photoresist stripping system. This system uses the qualified ADF-25c chemistry for the fabrication of flex circuits, while the ASI uses the qualified potassium hydroxide chemistry. The stripping process removes photoresist, which is used to protect the copper traces being formed during the etch process.

  3. Bird community response to filter strips in Maryland

    USGS Publications Warehouse

    Blank, P.J.; Dively, G.P.; Gill, D.E.; Rewa, C.A.

    2011-01-01

    Filter strips are strips of herbaceous vegetation planted along agricultural field margins adjacent to streams or wetlands and are designed to intercept sediment, nutrients, and agrichemicals. Roughly 16,000 ha of filter strips have been established in Maryland through the United States Department of Agriculture's Conservation Reserve Enhancement Program. Filter strips often represent the only uncultivated herbaceous areas on farmland in Maryland and therefore may be important habitat for early-successional bird species. Most filter strips in Maryland are planted to either native warm-season grasses or cool-season grasses and range in width from 10.7 m to 91.4 m. From 2004 to 2007 we studied the breeding and wintering bird communities in filter strips adjacent to wooded edges and non-buffered field edges and the effect that grass type and width of filter strips had on bird community composition. We used 5 bird community metrics (total bird density, species richness, scrub-shrub bird density, grassland bird density, and total avian conservation value), species-specific densities, nest densities, and nest survival estimates to assess the habitat value of filter strips for birds. Breeding and wintering bird community metrics were greater in filter strips than in non-buffered field edges but did not differ between cool-season and warm-season grass filter strips. Most breeding bird community metrics were negatively related to the percent cover of orchardgrass (Dactylis glomerata) in ???1 yr. Breeding bird density was greater in narrow (60 m) filter strips. Our results suggest that narrow filter strips adjacent to wooded edges can provide habitat for many bird species but that wide filter strips provide better habitat for grassland birds, particularly obligate grassland species. If bird conservation is an objective, avoid planting orchardgrass in filter strips and reduce or eliminate orchardgrass from filter strips through management practices. Copyright ?? 2011 The

  4. Ultra-stripped supernovae: progenitors and fate

    NASA Astrophysics Data System (ADS)

    Tauris, Thomas M.; Langer, Norbert; Podsiadlowski, Philipp

    2015-08-01

    The explosion of ultra-stripped stars in close binaries can lead to ejecta masses <0.1 M⊙ and may explain some of the recent discoveries of weak and fast optical transients. In Tauris et al., it was demonstrated that helium star companions to neutron stars (NSs) may experience mass transfer and evolve into naked ˜1.5 M⊙ metal cores, barely above the Chandrasekhar mass limit. Here, we elaborate on this work and present a systematic investigation of the progenitor evolution leading to ultra-stripped supernovae (SNe). In particular, we examine the binary parameter space leading to electron-capture (EC SNe) and iron core-collapse SNe (Fe CCSNe), respectively, and determine the amount of helium ejected with applications to their observational classification as Type Ib or Type Ic. We mainly evolve systems where the SN progenitors are helium star donors of initial mass MHe = 2.5-3.5 M⊙ in tight binaries with orbital periods of Porb = 0.06-2.0 d, and hosting an accreting NS, but we also discuss the evolution of wider systems and of both more massive and lighter - as well as single - helium stars. In some cases, we are able to follow the evolution until the onset of silicon burning, just a few days prior to the SN explosion. We find that ultra-stripped SNe are possible for both EC SNe and Fe CCSNe. EC SNe only occur for MHe = 2.60-2.95 M⊙ depending on Porb. The general outcome, however, is an Fe CCSN above this mass interval and an ONeMg or CO white dwarf for smaller masses. For the exploding stars, the amount of helium ejected is correlated with Porb - the tightest systems even having donors being stripped down to envelopes of less than 0.01 M⊙. We estimate the rise time of ultra-stripped SNe to be in the range 12 h-8 d, and light-curve decay times between 1 and 50 d. A number of fitting formulae for our models are provided with applications to population synthesis. Ultra-stripped SNe may produce NSs in the mass range 1.10-1.80 M⊙ and are highly relevant for

  5. Analysis of a hybrid, unidirectional buffer strip laminate

    NASA Technical Reports Server (NTRS)

    Dharani, L. R.; Goree, J. G.

    1983-01-01

    A method of analysis capable of predicting accurately the fracture behavior of a unidirectional composite laminate containing symmetrically placed buffer strips is presented. As an example, for a damaged graphite/epoxy laminate, the results demonstrate the manner in which to select the most efficient combination of buffer strip properties necessary to inhibit crack growth. Ultimate failure of the laminate after crack arrest can occur under increasing load either by continued crack extension through the buffer strips or the crack can jump the buffer strips. For some typical hybrid materials it is found that a buffer strip spacing-to-width ratio of about four to one is the most efficient.

  6. Analysis of a hybrid-undirectional buffer strip laminate

    NASA Technical Reports Server (NTRS)

    Dharani, L. R.; Goree, J. G.

    1983-01-01

    A method of analysis capable of predicting accurately the fracture behavior of a unidirectional composite laminate containing symmetrically placed buffer strips is presented. As an example, for a damaged graphite/epoxy laminate, the results demonstrate the manner in which to select the most efficient combination of buffer strip properties necessary to inhibit crack growth. Ultimate failure of the laminate after the arrest can occur under increasing load either by continued crack extension through the buffer strips or the crack can jump the buffer strips. For some typical hybrid materials it is found that a buffer strip spacing to width ratio of about four to one is the most efficient.

  7. Antenna with distributed strip and integrated electronic components

    DOEpatents

    Rodenbeck, Christopher T.; Payne, Jason A.; Ottesen, Cory W.

    2008-08-05

    An antenna comprises electrical conductors arranged to form a radiating element including a folded line configuration and a distributed strip configuration, where the radiating element can be in proximity to a ground conductor and/or arranged as a dipole. Embodiments of the antenna include conductor patterns formed on a printed wiring board, having a ground plane, spacedly adjacent to and coplanar with the radiating element. An antenna can comprise a distributed strip patterned on a printed wiring board, integrated with electronic components mounted on top of or below the distributed strip, and substantially within the extents of the distributed strip. Mounting of electronic components on top of or below the distributed strip has little effect on the performance of the antenna, and allows for realizing the combination of the antenna and integrated components in a compact form. An embodiment of the invention comprises an antenna including a distributed strip, integrated with a battery mounted on the distributed strip.

  8. Mechanics of Thin Strip Steering in Hot Rolling

    NASA Astrophysics Data System (ADS)

    Jiang, Zhengyi; Tieu, Kiet A.

    2004-06-01

    The hot rolling of thin strip can result in several problems in hot rolling, for instance, the control of strip steering, strip shape and flatness and surface roughness etc. Therefore, the hot rolling of thin strip brings out a requirement of innovative technologies such as the extended control of shape and flatness, steering control and reduction of load by roll gap lubrication. In this paper, the authors focus on the analysis of thin strip snaking movement, as well as solve the related problems such as the shape and flatness due to a larger reduction applied when the strip is thinner. A finite element method was used to simulate this nonsymmetricity rolling considering the non-uniform reduction along the strip width. The calculated spread is compared with the measured values obtained from the rolling mill in laboratory and the friction effect is also discussed.

  9. Membrane air-stripping: Effects of pretreatment

    SciTech Connect

    Castro, K. ); Zander, A.K. . Dept. of Civil and Environmental Engineering)

    1995-03-01

    As a result of the Safe Drinking Water Act and its 1986 amendments, the number of regulated volatile organic chemicals (VOCs) has increased substantially. The discovery of drinking water supply sources contaminated by VOCs is also increasing. These factors have led to the development of alternative treatment methods for control of VOCs. Microporous polypropylene hollow-fiber membranes offer significant advantages over packed-tower aeration for removing volatile organic chemicals. A laboratory study assessed the performance of membrane air-stripping in continuous operation, while exposed to various pretreatments. Results indicate that membrane air-stripping is compatible with low-pH or low-chlorine waters but not with waters of high pH or high-chlorine concentration or those that are ozonated.

  10. Catalytic treatment of air-stripping effluents

    SciTech Connect

    Kosusko, M.; Mullins, M.E.; Rogers, T.N.; Ramanathan, K.

    1987-12-01

    The paper reviews the applicability of catalytic oxidation to control ground-water air-stripping gaseous effluents with emphasis on system designs and case histories. The contaminants and catalyst poisons encountered in stripping operations are also reviewed. Vapor-phase carbon adsorption and thermal incineration, the treatment methods that have been applied most often, have some disadvantages: adsorption merely transfers the contaminant to a solid phase, which in turn requires disposal or regeneration; and thermal incineration may be expensive, since it requires a substantial energy input to destroy dilute gas-phase contaminants. A new alternative is appearing in the form of catalytic oxidation. Like thermal incineration, it is an ultimate disposal method, but the energy costs are lower.

  11. ITCS Test Strip Development and Certification

    NASA Technical Reports Server (NTRS)

    Carrigan, Caitlin; Adam, Niklas; Pickering, Karen; Gazda, Daniel; Piowaty, Hailey

    2011-01-01

    Internal coolant loops used for International Space Station thermal control must be periodically monitored for system health, including pH, biocide levels and any indication of ammonia. The presence of ammonia, possible via a microleak in the interface between the internal and external thermal control systems, could be a danger to the crew. The Internal Thermal Control System (ITCS) Sampling Kit uses test strips as a colorimetric indicator of pH and concentrations of biocide and free ammonia. This paper describes the challenges in designing an ammonia colorimetric indicator in a variable pH environment, as well as lessons learned, ultimately resulting in a robust test strip to indicate a hazardous ammonia leak.

  12. Coiling Temperature Control in Hot Strip Mill

    NASA Astrophysics Data System (ADS)

    Imanari, Hiroyuki; Fujiyama, Hiroaki

    Coiling temperature is one of the most significant factors in products of hot strip mill to determine material properties such as strength, toughness of steel, so it is very important to achieve accurate coiling temperature control (CTC). Usually there are a few pyrometers on the run out table in hot strip mill, therefore temperature model and its adapting system have large influences on the accuracy of CTC. Also unscheduled change of rolling speed has a bad effect to keep coiling temperature as its target. Newly developed CTC system is able to get very accurate coiling temperature against uncertain factors and disturbances by adopting easily identified temperature model, learning method and dynamic set up function. The features of the CTC system are discussed with actual data, and the effectiveness of the system is shown by actual control results.

  13. Pf/Zeolite Catalyst for Tritium Stripping

    SciTech Connect

    Hsu, R.H.

    2001-03-26

    This report described promising hydrogen (protium and tritium) stripping results obtained with a Pd/zeolite catalyst at ambient temperature. Preliminary results show 90-99+ percent tritium stripping efficiency may be obtained, with even better performance expected as bed configuration and operating conditions are optimized. These results suggest that portable units with single beds of the Pd/zeolite catalyst may be utilized as ''catalytic absorbers'' to clean up both tritium gas and tritiated water. A cart-mounted prototype stripper utilizing this catalyst has been constructed for testing. This portable stripper has potential applications in maintenance-type jobs such as tritium line breaks. This catalyst can also potentially be utilized in an emergency stripper for the Replacement Tritium Facility.

  14. The DEEP2 Galaxy Redshift Survey: AEGIS observations of a Dual AGNat z = 0.7

    SciTech Connect

    Gerke1, Brian F.; Newman, Jeffrey A.; Lotz, Jennifer; Yan,Renbin; Barmby, P.; Coil, Alison L.; Conselice, Christopher J.; Ivison,R.J.; Lin, Lihw ai; Koo, David C.; Nandra, Kirpal; Salim, Samir; Small,Todd; Weiner, Benjamin J.; Cooper, Michael C.; Davis, Marc; Faber, S.M.; Guhathakurta, Puragra

    2006-10-13

    We present evidence for a dual Active Galactic Nucleus (AGN) within an early-type galaxy at z = 0.709 in the Extended Groth Strip. The galaxy lies on the red sequence, with absolute magnitude M{sub B} = -21.0 ( AB, w , with h = 0 0.7) and rest-frame color U - B = 1.38. Its optical spectrum shows strong, double-peaked [O III] emission lines and weak H{beta} emission, with Seyfert-like line ratios. The two narrow peaks are separate by 630 km s-1 in velocity and arise from two distinct regions, spatially resolved in the DEIMOS spectrum, with a projected physical separation of 1.2 kpc. HST/ACS imaging shows an early-type (E/S0) galaxy with hints of disturbed structure, consistent with the remnant of a dissipationless merger. Multiwavelength photometric information from the AEGIS consortium confirm the identification of a dust-obscured AGN in an early-type galaxy, with detections in X-ray, optical, infrared and radio wavebands. These data are most readily explained as a single galaxy harboring two AGN--the first such system to be observed in an otherwise typical early-type galaxy.

  15. Multitwist optical Möbius strips.

    PubMed

    Freund, Isaac

    2010-01-15

    Circularly polarized Gauss-Laguerre GL00 and GL01 laser beams that cross at their waists at a small angle are shown to generate a quasi-paraxial field that contains a line of circular polarization, a C line, surrounded by polarization ellipses whose major and minor axes generate multitwist Möbius strips with twist numbers that increase with the distance from the C point.

  16. Stripping organics from groundwater and wastewater

    SciTech Connect

    Lamarre, B.; Shearouse, D.

    1996-03-01

    At thousands of installations worldwide, air stripping has been used as an efficient method for removing volatile and semi-volatile contaminants from water -- both groundwater and industrial wastewater streams. In addition to numerous field installations, extensive laboratory analysis has confirmed the performance of various types and sizes of air strippers, and has made the practice highly predictable for a wide range of contaminants. The general principles of air stripping are quite simple. Within an air stripper, an air stream is directed across a thin film of contaminated water. Contaminants at the air-water interface volatilize and are discharged to the atmosphere, or to an off-gas treatment system. The two main types of air strippers are packed towers and try-type strippers. In many cases, air stripping can be a fast, efficient and economical approach to treating organics-laden water streams. However, since different wastewater streams can vary significantly, each must be evaluated to characterize its constitutents, determine each constituent`s potential affinity or resistance to being volatilized, and identify any pre-treatment steps that need to be taken to produce the desired results.

  17. TCT measurements with slim edge strip detectors

    NASA Astrophysics Data System (ADS)

    Mandić, Igor; Cindro, Vladimir; Gorišek, Andrej; Kramberger, Gregor; Mikuž, Marko; Zavrtanik, Marko; Fadeyev, Vitaliy; Sadrozinski, Hartmut F.-W.; Christophersen, Marc; Phlips, Bernard

    2014-07-01

    Transient current technique (TCT) measurements with focused laser light on miniature silicon strip detectors (n+-type strips on p-type bulk) with one inactive edge thinned to about 100 μm using the Scribe-Cleave-Passivate (SCP) method are presented. Pulses of focused IR (λ=1064 nm) laser light were directed to the surface of the detector and charge collection properties near the slim edge were investigated. Measurements before and after irradiation with reactor neutrons up to 1 MeV equivalent fluence of 1.5×1015 neq/cm2 showed that SCP thinning of detector edge does not influence its charge collection properties. TCT measurements were done also with focused red laser beam (λ=640 nm) directed to the SCP processed side of the detector. The absorption length of red light in silicon is about 3 μm so with this measurement information about the electric field at the edge can be obtained. Observations of laser induced signals indicate that the electric field distribution along the depth of the detector at the detector edge is different than in the detector bulk: electric field is higher near the strip side and lower at the back side. This is a consequence of negative surface charge caused by passivation of the cleaved edge with Al2O3. The difference between bulk and edge electric field distributions gets smaller after irradiation.

  18. Automating and controlling dry paint stripping

    NASA Astrophysics Data System (ADS)

    Cunliffe, F. R., III

    1989-03-01

    The key parameters which affect the efficiency and success of the dry paint-stripping process are discussed, including pressure at the nozzle, the size of the nozzle, the angle of blasting, the distance from the work-piece, the hardness and the size of the media, and the media flow. It is pointed out that, by automating the dry paint stripping process, many of these parameters can be controlled, making it possible to reproduce the same result, time and again. Attention is given to a recently developed automated aircraft wheel stripping machine, whose units are operated by joy stick controls from outside the cabinet. The wheel can be rotated and moved forward and backward in order to gain access to all of the surfaces; the operator also controls the nozzle manipulator which is a five-axis unit. At present, robotic systems are being developed for small aircraft and for the jumbo jets in use throughout the commercial airline fleets of the world.

  19. Navajo mine; Multiple seam dragline stripping

    SciTech Connect

    Schenk, D.L.

    1990-10-01

    The Navajo mine is exclusively a multiple-seam surface coal mine located in the northwest corner of New Mexico. The property is situated entirely on the Navajo Indian Reservation. It is owned and operated by the Broken Hill Propriety Co. Ltd., of Melbourne, Australia. The mine began production in January 1963 with a long-term fuel supply agreement with the Four Corners power plant. The 2175 MW nominal generating capacity of the Four Corners power plant consumes 7.2 Mt to 7.7 Mt/a (8 million to 8.5 million stpy) of coal. The Navajo Mine has estimated reserves totaling 1 Gt (1.1 billion st) of strip minable coal. Only about one-third of that total is presently committed to the generating station. As development continued over the years, mining operations advanced into more complex geologic areas to satisfy the utility's demand for coal. This case study of the fourth production cut highlights a variety of dragline stripping techniques including highwall bench (overburden) side cast, intermediate highwall bench (parting-interburden) side cast and spoilside bench (partings-interburden) stripping methods. The Dixon Pit offers considerable challenges in the surface recovery of up to seven seams of coal within the 1432 m (4700 ft) of total pit length.

  20. Ram pressure stripping in the Virgo Cluster

    NASA Astrophysics Data System (ADS)

    Verdugo, C.; Combes, F.; Dasyra, K.; Salomé, P.; Braine, J.

    2015-10-01

    Gas can be violently stripped from their galaxy disks in rich clusters, and be dispersed over 100 kpc-scale tails or plumes. Young stars have been observed in these tails, suggesting they are formed in situ. This will contribute to the intracluster light, in addition to tidal stripping of old stars. We want to quantify the efficiency of intracluster star formation. We present CO(1-0) and CO(2-1) observations, made with the IRAM-30 m telescope, towards the ram-pressure stripped tail northeast of NGC 4388 in Virgo. We selected HII regions found all along the tails, together with dust patches, as observing targets. We detect molecular gas in 4 positions along the tail, with masses between 7 × 105 to 2 × 106M⊙. Given the large distance from the NGC 4388 galaxy, the molecular clouds must have formed in situ, from the HI gas plume. We compute the relation between surface densities of star formation and molecular gas in these regions, and find that the star formation has very low efficiency. The corresponding depletion time of the molecular gas can be up to 500 Gyr and more. Since this value exceeds a by far Hubble time, this gas will not be converted into stars, and will stay in a gaseous phase to join the intracluster medium.

  1. Wide field strip-imaging optical system

    NASA Technical Reports Server (NTRS)

    Vaughan, Arthur H. (Inventor)

    1994-01-01

    A strip imaging wide angle optical system is provided. The optical system is provided with a 'virtual' material stop to avoid aberrational effects inherent in wide angle optical systems. The optical system includes a spherical mirror section for receiving light from a 180-degree strip or arc of a target image. Light received by the spherical mirror section is reflected to a frusto-conical mirror section for subsequent rereflection to a row of optical fibers. Each optical fiber transmits a portion of the received light to a detector. The optical system exploits the narrow cone of acceptance associated with optical fibers to substantially eliminate vignetting effects inherent in wide-angle systems. Further, the optical system exploits the narrow cone of acceptance of the optical fibers to substantially limit spherical aberration. The optical system is ideally suited for any application wherein a 180-degree strip image need be detected, and is particularly well adapted for use in hostile environments such as in planetary exploration.

  2. Sustainable Water and Energy in Gaza Strip

    NASA Astrophysics Data System (ADS)

    Hamdan, L.; Zarei, M.; Chianelli, R.; Gardner, E.

    2007-12-01

    Shortage of fresh water is a common problem in different areas of the world including the Middle East. Desalination of seawater and brackish water is the cheapest way to obtain fresh water in many regions. This research focuses on the situation in Gaza Strip where there is a severe shortage in the energy and water supply. The depletion of fresh water supplies and lack of wastewater treatments result in environmental problems. A solar powered cogeneration plant producing water and energy is proposed to be a suitable solution for Gaza Strip. Solar energy, using Concentrating Solar thermal Power (CSP) technologies, is used to produce electricity by a steam cycle power plant. Then the steam is directed to a desalination plant where it is used to heat the seawater to obtain freshwater. The main objective of this research is to outline a solution for the water problems in Gaza Strip, which includes a cogeneration (power and water) solar powered plant. The research includes four specific objectives: 1- an environmental and economic comparison between solar and fossil fuel energies; 2- technical details for the cogeneration plant; 3- cost and funding, 4- the benefits.

  3. Multiple Electron Stripping of Heavy Ion Beams

    SciTech Connect

    D. Mueller; L. Grisham; I. Kaganovich; R. L. Watson; V. Horvat; K. E. Zaharakis; Y. Peng

    2002-06-25

    One approach being explored as a route to practical fusion energy uses heavy ion beams focused on an indirect drive target. Such beams will lose electrons while passing through background gas in the target chamber, and therefore it is necessary to assess the rate at which the charge state of the incident beam evolves on the way to the target. Accelerators designed primarily for nuclear physics or high energy physics experiments utilize ion sources that generate highly stripped ions in order to achieve high energies economically. As a result, accelerators capable of producing heavy ion beams of 10 to 40 Mev/amu with charge state 1 currently do not exist. Hence, the stripping cross-sections used to model the performance of heavy ion fusion driver beams have, up to now, been based upon theoretical calculations. We have investigated experimentally the stripping of 3.4 Mev/amu Kr 7+ and Xe +11 in N2; 10.2 MeV/amu Ar +6 in He, N2, Ar and Xe; 19 MeV/amu Ar +8 in He, N2, Ar and Xe; 30 MeV He 1 + in He, N2, Ar and Xe; and 38 MeV/amu N +6 in He, N2, Ar and Xe. The results of these measurements are compared with the theoretical calculations to assess their applicability over a wide range of parameters.

  4. Damage tolerance of woven graphite-epoxy buffer strip panels

    NASA Technical Reports Server (NTRS)

    Kennedy, John M.

    1990-01-01

    Graphite-epoxy panels with S glass buffer strips were tested in tension and shear to measure their residual strengths with crack-like damage. The buffer strips were regularly spaced narrow strips of continuous S glass. Panels were made with a uniweave graphite cloth where the S glass buffer material was woven directly into the cloth. Panels were made with different width and thickness buffer strips. The panels were loaded to failure while remote strain, strain at the end of the slit, and crack opening displacement were monitoring. The notched region and nearby buffer strips were radiographed periodically to reveal crack growth and damage. Except for panels with short slits, the buffer strips arrested the propagating crack. The strength (or failing strain) of the panels was significantly higher than the strength of all-graphite panels with the same length slit. Panels with wide, thick buffer strips were stronger than panels with thin, narrow buffer strips. A shear-lag model predicted the failing strength of tension panels with wide buffer strips accurately, but over-estimated the strength of the shear panels and the tension panels with narrow buffer strips.

  5. Uranium stripping from tributyl phosphate by urea solutions

    NASA Astrophysics Data System (ADS)

    Skripchenko, S. Yu.; Titova, S. M.; Smirnov, A. L.; Rychkov, V. N.

    2016-09-01

    The process of uranium stripping from tri-n-butyl phosphate in kerosene by urea solutions was investigated at the volume ratio of the organic and aqueous phases of (1-10) : 1 in the temperature range of 20-60 °C. The stripping of uranium from a loaded organic phase increased with increasing urea content in the solution and with increasing temperature. Maximum recovery of uranium from tributyl phosphate was obtained using a solution that contained 8-12 mol/l of urea. The application of a urea solution for uranium stripping resulted in the strip product solution containing 200-240 g/L of uranium. The process of uranium stripping by dilute nitric acid was also investigated. Results of uranium stripping by the two methods are compared and discussed.

  6. Textures of strip cast Fe16%Cr

    SciTech Connect

    Raabe, D.; Reher, F.; Luecke, K. ); Hoelscher, M. )

    1993-07-01

    Ferritic stainless steels with a Cr content of 16% are mainly manufactured by continuous casting, hot rolling, cold rolling and final recrystallization. The recent development of the strip casting method, which provides sheets with an equivalent geometry, i.e. thickness and width as the hot rolled band, yields significant improvements in comparison to the conventional processing. The weak initial strip texture and the homogeneous microstructure through the sample thickness have shown evidence of avoiding the well known ridging phenomenon of the finally rolled and annealed product. The occurrence of ridging in conventionally processed FeCr steel has been attributed to the collective shear of grains with (hkl)<110>, i.e. [alpha]-fibre orientations, which become oriented and topologically arranged during hot rolling. In the present paper the textures of a stainless ferritic steel with 16% Cr and 0.02% C, strip casted (SC) as well as hot rolled (HR), were thus investigated. The textures were examined by measuring the four incomplete pole figures (110), (200), (112) and (103) in the back reflection mode. The orientation distribution function (ODF) was calculated by the series expansion method (1[sup max]=22). In the case of cubic crystal symmetry and orthorhombic sample symmetry an orientation can then be presented by the three Euler angles [var phi][sub 1], [var phi], [var phi][sub 2] in the reducted Euler space. Since bcc steels tend to develop characteristic fibre textures, it is favorable to present the ODFs as isointensity diagrams in [var phi][sub 1]-sections through the Eulerspace. In this work the [alpha]-fibre and the [gamma]-fibre are of major interest.

  7. High pressure water jet cutting and stripping

    NASA Technical Reports Server (NTRS)

    Hoppe, David T.; Babai, Majid K.

    1991-01-01

    High pressure water cutting techniques have a wide range of applications to the American space effort. Hydroblasting techniques are commonly used during the refurbishment of the reusable solid rocket motors. The process can be controlled to strip a thermal protective ablator without incurring any damage to the painted surface underneath by using a variation of possible parameters. Hydroblasting is a technique which is easily automated. Automation removes personnel from the hostile environment of the high pressure water. Computer controlled robots can perform the same task in a fraction of the time that would be required by manual operation.

  8. Energy Fuels Nuclear, Inc. Arizona Strip Operations

    SciTech Connect

    Pool, T.C.

    1993-05-01

    Founded in 1975 by uranium pioneer, Robert W. Adams, Energy Fuels Nuclear, Inc. (EFNI) emerged as the largest US uranium mining company by the mid-1980s. Confronting the challenges of declining uranium market prices and the development of high-grade ore bodies in Australia and Canada, EFNI aggressively pursued exploration and development of breccia-pipe ore bodies in Northwestern Arizona. As a result, EFNI's production for the Arizona Strip of 18.9 million pounds U[sub 3]O[sub 8] over the period 1980 through 1991, maintained the company's status as a leading US uranium producer.

  9. Recent developments in metastable β strip alloys

    NASA Astrophysics Data System (ADS)

    Fanning, J. C.; Fox, S. P.

    2005-12-01

    The strip producibility, good fabricability, and excellent mechanical properties of β alloys make them useful for a variety of fabricated sheet metal structures on aircraft. TIMETAL 15-3 is currently used for environmental control system ducting on the Boeing 777 and, more recently, has been used on the Airbus A380. For applications that require exposure to higher temperatures, such as the exhaust assemblies, TIMETAL 21S is now used on the Boeing 777, Airbus A340, and various other civil and military aircraft.

  10. Fermilab silicon strip readout chip for BTev

    SciTech Connect

    Yarema, Raymond; Hoff, Jim; Mekkaoui, Abderrezak; Manghisoni, Massimo; Re, Valerio; Angeleri, Valentina; Manfredi, Pier Francesco; Ratti, Lodovico; Speziali, Valeria; /Fermilab /Bergamo U. /INFN, Pavia /Pavia U.

    2005-05-01

    A chip has been developed for reading out the silicon strip detectors in the new BTeV colliding beam experiment at Fermilab. The chip has been designed in a 0.25 {micro}m CMOS technology for high radiation tolerance. Numerous programmable features have been added to the chip, such as setup for operation at different beam crossing intervals. A full size chip has been fabricated and successfully tested. The design philosophy, circuit features, and test results are presented in this paper.

  11. Power and control in gay strip clubs.

    PubMed

    DeMarco, Joseph R G

    2007-01-01

    The gay strip club is a place in which more than displays of male beauty take place. The mix of customers, performers, liquor, and nudity results in fascinating dynamics. Of interest in this article are the power relationships and issues of control played out both among and between strippers and customers. Based on extensive participant observation conducted in eight cities and numerous bars/clubs and including more than 150 in-depth interviews, this article concerns just one aspect of the world of male strippers who perform for men. PMID:18019071

  12. Method for forming a solar array strip

    NASA Technical Reports Server (NTRS)

    Mueller, R. I.; Yasui, R. K. (Inventor)

    1979-01-01

    A flexible solar array strip is formed by a method which lends itself to automatic production techniques. Solder pads are deposited on printed circuitry deposited on a flexible structure. The resultant substrate is stored on a drum from which it is withdrawn and incrementally advanced along a linear path. Solderless solar cells are serially transported into engagement with the pads which are then heated in order to attach the cells to the circuitry. Excess flux is cleaned from the cells which are encapsulated in a protective coating. The resultant array is then spirally wound on a drum.

  13. Spray-formed tooling and aluminum strip

    SciTech Connect

    McHugh, K.M.

    1995-11-01

    Spray forming is an advanced materials processing technology that converts a bulk liquid metal to a near-net-shape solid by depositing atomized droplets onto a suitably shaped substrate. By combining rapid solidification processing with product shape control, spray forming can reduce manufacturing costs while improving product quality. De Laval nozzles offer an alternative method to the more conventional spray nozzle designs. Two applications are described: high-volume production of aluminum alloy strip, and the production of specialized tooling, such as injection molds and dies, for rapid prototyping.

  14. Space Vehicle Heat Shield Having Edgewise Strips of Ablative Material

    NASA Technical Reports Server (NTRS)

    Blosser, Max L. (Inventor); Poteet, Carl C. (Inventor); Bouslog, Stan A. (Inventor)

    2015-01-01

    A heat shield for a space vehicle comprises a plurality of phenolic impregnated carbon ablator (PICA) blocks secured to a surface of the space vehicle and arranged in a pattern with gaps therebetween. The heat shield further comprises a plurality of PICA strips disposed in the gaps between the PICA blocks. The PICA strips are mounted edgewise, such that the structural orientation of the PICA strips is substantially perpendicular to the structural orientation of the PICA blocks.

  15. BUDHIES II: a phase-space view of H I gas stripping and star formation quenching in cluster galaxies

    NASA Astrophysics Data System (ADS)

    Jaffé, Yara L.; Smith, Rory; Candlish, Graeme N.; Poggianti, Bianca M.; Sheen, Yun-Kyeong; Verheijen, Marc A. W.

    2015-04-01

    We investigate the effect of ram-pressure from the intracluster medium on the stripping of H I gas in galaxies in a massive, relaxed, X-ray bright, galaxy cluster at z = 0.2 from the Blind Ultra Deep H I Environmental Survey (BUDHIES). We use cosmological simulations, and velocity versus position phase-space diagrams to infer the orbital histories of the cluster galaxies. In particular, we embed a simple analytical description of ram-pressure stripping in the simulations to identify the regions in phase-space where galaxies are more likely to have been sufficiently stripped of their H I gas to fall below the detection limit of our survey. We find a striking agreement between the model predictions and the observed location of H I-detected and non-detected blue (late-type) galaxies in phase-space, strongly implying that ram-pressure plays a key role in the gas removal from galaxies, and that this can happen during their first infall into the cluster. However, we also find a significant number of gas-poor, red (early-type) galaxies in the infall region of the cluster that cannot easily be explained with our model of ram-pressure stripping alone. We discuss different possible additional mechanisms that could be at play, including the pre-processing of galaxies in their previous environment. Our results are strengthened by the distribution of galaxy colours (optical and UV) in phase-space, that suggests that after a (gas-rich) field galaxy falls into the cluster, it will lose its gas via ram-pressure stripping, and as it settles into the cluster, its star formation will decay until it is completely quenched. Finally, this work demonstrates the utility of phase-space diagrams to analyse the physical processes driving the evolution of cluster galaxies, in particular H I gas stripping.

  16. The problem of an inclined crack in an orthotropic strip

    NASA Technical Reports Server (NTRS)

    Delale, F.; Bakirtas, I.; Erdogan, F.

    1978-01-01

    The elastostatic problem for an infinite orthotropic strip containing crack was considered. It was assumed that the orthogonal axes of material orthotropy may have an arbitrary angular orientation with respect to the orthogonal axes of geometric symmetry of the uncracked strip. The crack was located along an axis of orthotropy, hence, at an arbitrary angle with respect to the sides of the strip. The general problem was formulated in terms of a system of singular integral equations for arbitrary crack surface tractions. As examples Modes 1 and 2 stress intensity factors were calculated for the strip having an internal or an edge crack with various lengths and angular orientations.

  17. An assessment of buffer strips for improving damage tolerance

    NASA Technical Reports Server (NTRS)

    Poe, C. C., Jr.; Kennedy, J. M.

    1981-01-01

    Graphite/epoxy panels with buffer strips were tested in tension to measure their residual strength with crack-like damage. Panels were made with 45/0/-45/90(2S) and 45/0/450(2S) layups. The buffer strips were parallel to the loading directions. They were made by replacing narrow strips of the 0 deg graphite plies with strips of either 0 deg S-Glass/epoxy or Kevlar-49/epoxy on either a one for one or a two for one basis. In a third case, O deg graphite/epoxy was used as the buffer material and thin, perforated Mylar strips were placed between the 0 deg piles and the cross-plies to weaken the interfaces and thus to isolate the 0 deg plies. Some panels were made with buffer strips of different widths and spacings. The buffer strips arrested the cracks and increased the residual strengths significantly over those plain laminates without buffer strips. A shear-lag type stress analysis correctly predicted the effects of layups, buffer material, buffer strip width and spacing, and the number of plies of buffer material.

  18. Liquid crystal elastomer strips as soft crawlers

    NASA Astrophysics Data System (ADS)

    DeSimone, Antonio; Gidoni, Paolo; Noselli, Giovanni

    2015-11-01

    In this paper, we speculate on a possible application of Liquid Crystal Elastomers to the field of soft robotics. In particular, we study a concept for limbless locomotion that is amenable to miniaturisation. For this purpose, we formulate and solve the evolution equations for a strip of nematic elastomer, subject to directional frictional interactions with a flat solid substrate, and cyclically actuated by a spatially uniform, time-periodic stimulus (e.g., temperature change). The presence of frictional forces that are sensitive to the direction of sliding transforms reciprocal, 'breathing-like' deformations into directed forward motion. We derive formulas quantifying this motion in the case of distributed friction, by solving a differential inclusion for the displacement field. The simpler case of concentrated frictional interactions at the two ends of the strip is also solved, in order to provide a benchmark to compare the continuously distributed case with a finite-dimensional benchmark. We also provide explicit formulas for the axial force along the crawler body.

  19. Transparent Helium in Stripped Envelope Supernovae

    NASA Astrophysics Data System (ADS)

    Piro, Anthony L.; Morozova, Viktoriya S.

    2014-09-01

    Using simple arguments based on photometric light curves and velocity evolution, we propose that some stripped envelope supernovae (SNe) show signs that a significant fraction of their helium is effectively transparent. The main pieces of evidence are the relatively low velocities with little velocity evolution, as are expected deep inside an exploding star, along with temperatures that are too low to ionize helium. This means that the helium should not contribute to the shaping of the main SN light curve, and thus the total helium mass may be difficult to measure from simple light curve modeling. Conversely, such modeling may be more useful for constraining the mass of the carbon/oxygen core of the SN progenitor. Other stripped envelope SNe show higher velocities and larger velocity gradients, which require an additional opacity source (perhaps the mixing of heavier elements or radioactive nickel) to prevent the helium from being transparent. We discuss ways in which similar analysis can provide insights into the differences and similarities between SNe Ib and Ic, which will lead to a better understanding of their respective formation mechanisms.

  20. Therapeutic surfactant-stripped frozen micelles

    PubMed Central

    Zhang, Yumiao; Song, Wentao; Geng, Jumin; Chitgupi, Upendra; Unsal, Hande; Federizon, Jasmin; Rzayev, Javid; Sukumaran, Dinesh K.; Alexandridis, Paschalis; Lovell, Jonathan F.

    2016-01-01

    Injectable hydrophobic drugs are typically dissolved in surfactants and non-aqueous solvents which can induce negative side-effects. Alternatives like ‘top-down' fine milling of excipient-free injectable drug suspensions are not yet clinically viable and ‘bottom-up' self-assembled delivery systems usually substitute one solubilizing excipient for another, bringing new issues to consider. Here, we show that Pluronic (Poloxamer) block copolymers are amenable to low-temperature processing to strip away all free and loosely bound surfactant, leaving behind concentrated, kinetically frozen drug micelles containing minimal solubilizing excipient. This approach was validated for phylloquinone, cyclosporine, testosterone undecanoate, cabazitaxel and seven other bioactive molecules, achieving sizes between 45 and 160 nm and drug to solubilizer molar ratios 2–3 orders of magnitude higher than current formulations. Hypertonic saline or co-loaded cargo was found to prevent aggregation in some cases. Use of surfactant-stripped micelles avoided potential risks associated with other injectable formulations. Mechanistic insights are elucidated and therapeutic dose responses are demonstrated. PMID:27193558

  1. TRANSPARENT HELIUM IN STRIPPED ENVELOPE SUPERNOVAE

    SciTech Connect

    Piro, Anthony L.; Morozova, Viktoriya S.

    2014-09-01

    Using simple arguments based on photometric light curves and velocity evolution, we propose that some stripped envelope supernovae (SNe) show signs that a significant fraction of their helium is effectively transparent. The main pieces of evidence are the relatively low velocities with little velocity evolution, as are expected deep inside an exploding star, along with temperatures that are too low to ionize helium. This means that the helium should not contribute to the shaping of the main SN light curve, and thus the total helium mass may be difficult to measure from simple light curve modeling. Conversely, such modeling may be more useful for constraining the mass of the carbon/oxygen core of the SN progenitor. Other stripped envelope SNe show higher velocities and larger velocity gradients, which require an additional opacity source (perhaps the mixing of heavier elements or radioactive nickel) to prevent the helium from being transparent. We discuss ways in which similar analysis can provide insights into the differences and similarities between SNe Ib and Ic, which will lead to a better understanding of their respective formation mechanisms.

  2. Solder flow on narrow copper strips

    SciTech Connect

    Hosking, F.M.; Yost, F.G.; Holm, E.A.; Michael, J.R.

    1996-07-01

    Various solderability tests have been developed over the years to quantify the wetting behavior of solder on metallic surfaces. None offer an exact measure of capillary flow normally associated with conventional plated-through-hole and surface mount soldering. With shrinking package designs, increasing reliability requirements, and the emergence of new soldering technologies, there is a growing need to better understand and predict the flow of solder on printed wiring board (PWB) surfaces. Sandia National Laboratories has developed a capillary flow solderability test, through a joint effort with the National Center for Manufacturing Sciences, that considers this fundamental wetting issue for surface mount technology. The test geometry consists of a metal strip (width, {delta}) connected to a circular metal pad (radius, r{sub c}). Solder flow from the pad onto the strip depends on the geometric relationship between {delta} and r{sub c}. Test methodology, experimental results, and validation of a flow model are presented in this paper. 17 refs., 11 figs., 4 tabs.

  3. Therapeutic surfactant-stripped frozen micelles

    NASA Astrophysics Data System (ADS)

    Zhang, Yumiao; Song, Wentao; Geng, Jumin; Chitgupi, Upendra; Unsal, Hande; Federizon, Jasmin; Rzayev, Javid; Sukumaran, Dinesh K.; Alexandridis, Paschalis; Lovell, Jonathan F.

    2016-05-01

    Injectable hydrophobic drugs are typically dissolved in surfactants and non-aqueous solvents which can induce negative side-effects. Alternatives like `top-down' fine milling of excipient-free injectable drug suspensions are not yet clinically viable and `bottom-up' self-assembled delivery systems usually substitute one solubilizing excipient for another, bringing new issues to consider. Here, we show that Pluronic (Poloxamer) block copolymers are amenable to low-temperature processing to strip away all free and loosely bound surfactant, leaving behind concentrated, kinetically frozen drug micelles containing minimal solubilizing excipient. This approach was validated for phylloquinone, cyclosporine, testosterone undecanoate, cabazitaxel and seven other bioactive molecules, achieving sizes between 45 and 160 nm and drug to solubilizer molar ratios 2-3 orders of magnitude higher than current formulations. Hypertonic saline or co-loaded cargo was found to prevent aggregation in some cases. Use of surfactant-stripped micelles avoided potential risks associated with other injectable formulations. Mechanistic insights are elucidated and therapeutic dose responses are demonstrated.

  4. SNS Laser Stripping for H- Injection

    SciTech Connect

    V.V. Danilov, Y. Liu, K.B. Beard, V.G. Dudnikov, R.P. Johnson, Michelle D. Shinn

    2009-05-01

    The ORNL spallation neutron source (SNS) user facility requires a reliable, intense beams of protons. The technique of H- charge exchange injection into a storage ring or synchrotron has the potential to provide the needed beam currents, but it will be limited by intrinsic limitations of carbon and diamond stripping foils. A laser in combination with magnetic stripping has been used to demonstrate a new technique for high intensity proton injection, but several problems need to be solved before a practical system can be realized. Technology developed for use in Free Electron Lasers is being used to address the remaining challenges to practical implementation of laser controlled H- charge exchange injection for the SNS. These technical challenges include (1) operation in vacuum, (2) the control of the UV laser beam to synchronize with the H- beam and to shape the proton beam, (3) the control and stabilization of the Fabry-Perot resonator, and (4) protection of the mirrors from radiation.

  5. Stripping of phenols in model cooling towers

    SciTech Connect

    Turner, C.D.; Moe, T.A.; Wentz, C.A.

    1987-01-01

    Cooling towers are used to remove waste heat from unit operations in chemical processing plants. Using cooling towers for wastewater treatment and disposal through internal recycling has become an important alternative because of stricter wastewater discharge standards, the expense of specialized wastewater treatment systems and the limited availability and cost of water in arid regions. Designs for synfuels plants must address the problem of wastewater disposal. Alternative systems under consideration usually include zero discharge designs that incorporate evaporative cooling towers in the system. The mechanisms for contaminant removal in cooling towers are biological oxidation, stripping and chemical precipitation. Chemical precipitation is generally considered undesirable because of losses in heat transfer efficiency. Predicting whether stripping or biological oxidation will be the primary removal mechanism for phenolic compounds from coal conversion wastewaters used as makeup in cooling towers does not appear to be possible based on the results of these tests. The tests do indicate that the biological oxidation of phenol is possible in forced draft cooling towers.

  6. Occultation Predictions Using CCD Strip-Scanning Astrometry

    NASA Technical Reports Server (NTRS)

    Dunham, Edward W.; Ford, C. H.; Stone, R. P. S.; McDonald, S. W.; Olkin, C. B.; Elliot, J. L.; Witteborn, Fred C. (Technical Monitor)

    1994-01-01

    We are developing the method of CCD strip-scanning astrometry for the purpose of deriving reliable advance predictions for occultations involving small objects in the outer solar system. We are using a camera system based on a Ford/Loral 2Kx2K CCD with the Crossley telescope at Lick Observatory for this work. The columns of die CCD are aligned East-West, the telescope drive is stopped, and the CCD is clocked at the same rate that the stars drift across it. In this way we obtain arbitrary length strip images 20 arcmin wide with 0.58" pixels. Since planets move mainly in RA, it is possible to obtain images of the planet and star to be occulted on the same strip well before the occultation occurs. The strip-to-strip precision (i.e. reproducibility) of positions is limited by atmospheric image motion to about 0.1" rms per strip. However, for objects that are nearby in R.A., the image motion is highly correlated and their relative positions are good to 0.02" rms per strip. We will show that the effects of atmospheric image motion on a given strip can be removed if a sufficient number of strips of a given area have been obtained. Thus, it is possible to reach an rms precision of 0.02" per strip, corresponding to about 0.3 of Pluto or Triton's angular radius. The ultimate accuracy of a prediction based on strip-scanning astrometry is currently limited by the accuracy of the positions of the stars in the astrometric network used and by systematic errors most likely due to the optical system. We will show the results of . the prediction of some recent occultations as examples of the current capabilities and limitations of this technique.

  7. Metallicity Gradients of Stripped Core-Collapse Supernovae Host Galaxies

    NASA Astrophysics Data System (ADS)

    Fierroz, David F.; Modjaz, M.

    2013-01-01

    We examine a sample of over 30 galaxies that have hosted stripped core-collapse supernovae including SN IIb, SN Ib, SN Ic and SN Ic with broad lines (SN Ic-BL). The supernovae were discovered by both targeted and untargeted surveys including the Katzman Automatic Imaging Telescope (KAIT), the Nearby Supernova Factory (SNF) and the Palomar Transient Factory (PTF). The metallicity of the supernova environment is expected to play an important role during the short lifetimes of the massive stellar progenitors and likely influences the class of the explosion. We obtain spectra to measure metallicity at the nucleus of the galaxy as well as at HII regions going out to radii that include the supernova site. We use three different oxygen-abundance scales to calibrate and compare metallicities across core-collapse classes. By interpolating the metallicity across the host galaxy we construct our own metallicity gradients that can include SN that have no HII regions at their position and remove the selection effect in place by prior studies. This new feature allows us to probe SN environmental metallicities, even at sites that don’t have recent star formation activity.

  8. 7 CFR 29.6128 - Straight Stripped (X Group).

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... 7 Agriculture 2 2013-01-01 2013-01-01 false Straight Stripped (X Group). 29.6128 Section 29.6128 Agriculture Regulations of the Department of Agriculture AGRICULTURAL MARKETING SERVICE (Standards... REGULATIONS TOBACCO INSPECTION Standards Grades § 29.6128 Straight Stripped (X Group). This group consists...

  9. 7 CFR 29.6128 - Straight Stripped (X Group).

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... 7 Agriculture 2 2011-01-01 2011-01-01 false Straight Stripped (X Group). 29.6128 Section 29.6128 Agriculture Regulations of the Department of Agriculture AGRICULTURAL MARKETING SERVICE (Standards... REGULATIONS TOBACCO INSPECTION Standards Grades § 29.6128 Straight Stripped (X Group). This group consists...

  10. 7 CFR 29.6128 - Straight Stripped (X Group).

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... 7 Agriculture 2 2014-01-01 2014-01-01 false Straight Stripped (X Group). 29.6128 Section 29.6128 Agriculture Regulations of the Department of Agriculture AGRICULTURAL MARKETING SERVICE (Standards... REGULATIONS TOBACCO INSPECTION Standards Grades § 29.6128 Straight Stripped (X Group). This group consists...

  11. 7 CFR 29.6128 - Straight Stripped (X Group).

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... 7 Agriculture 2 2012-01-01 2012-01-01 false Straight Stripped (X Group). 29.6128 Section 29.6128 Agriculture Regulations of the Department of Agriculture AGRICULTURAL MARKETING SERVICE (Standards... REGULATIONS TOBACCO INSPECTION Standards Grades § 29.6128 Straight Stripped (X Group). This group consists...

  12. Emission reduction by multipurpose buffer strips on arable fields.

    PubMed

    Sloots, K; van der Vlies, A W

    2007-01-01

    In the area managed by Hollandse Delta, agriculture is under great pressure and the social awareness of the agricultural sector is increasing steadily. In recent years, a stand-still has been observed in water quality, in terms of agrochemicals, and concentrations even exceed the standard. To improve the waterquality a multi-purpose Field Margin Regulation was drafted for the Hoeksche Waard island in 2005. The regulation prescribes a crop-free strip, 3.5 m wide, alongside wet drainage ditches. The strip must be sown with mixtures of grasses, flowers or herbs. No crop protection chemicals or fertilizer may be used on the strips. A total length of approximately 200 km of buffer strip has now been laid. Besides reducing emissions, the buffer strips also stimulate natural pest control methods and encourage local tourism. Finally, the strips should lead to an improvement in the farmers' image. The regulation has proved to be successful. The buffer strips boosted both local tourism and the image of the agricultural sector. Above all, the strips provided a natural shield for emission to surface water, which will lead to an improvement of the water quality and raise the farmers' awareness of water quality and the environment.

  13. Design and Use of the Stratigraphic Strip Log.

    ERIC Educational Resources Information Center

    Fichter, Lynn Stanton

    1987-01-01

    Discusses the use of a strip log as a diagrammatic representation of the information available in a sequence of sedimentary rocks. Describes the design of the strip log (both symbolically and by visual/spatial patterns) and some of the possible interpretations that can be made using them. (TW)

  14. 7 CFR 29.6128 - Straight Stripped (X Group).

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 7 Agriculture 2 2010-01-01 2010-01-01 false Straight Stripped (X Group). 29.6128 Section 29.6128 Agriculture Regulations of the Department of Agriculture AGRICULTURAL MARKETING SERVICE (Standards... REGULATIONS TOBACCO INSPECTION Standards Grades § 29.6128 Straight Stripped (X Group). This group consists...

  15. Fabrication of chitosan-magnetite nanocomposite strip for chromium removal

    NASA Astrophysics Data System (ADS)

    Sureshkumar, Vaishnavi; Kiruba Daniel, S. C. G.; Ruckmani, K.; Sivakumar, M.

    2016-02-01

    Environmental pollution caused by heavy metals is a serious threat. In the present work, removal of chromium was carried out using chitosan-magnetite nanocomposite strip. Magnetite nanoparticles (Fe3O4) were synthesized using chemical co-precipitation method at 80 °C. The nanoparticles were characterized using UV-visible spectroscopy, fourier transform infrared spectroscopy, X-ray diffraction spectrometer, atomic force microscope, dynamic light scattering and vibrating sample magnetometer, which confirm the size, shape, crystalline nature and magnetic behaviour of nanoparticles. Atomic force microscope revealed that the particle size was 15-30 nm and spherical in shape. The magnetite nanoparticles were mixed with chitosan solution to form hybrid nanocomposite. Chitosan strip was casted with and without nanoparticle. The affinity of hybrid nanocomposite for chromium was studied using K2Cr2O7 (potassium dichromate) solution as the heavy metal solution containing Cr(VI) ions. Adsorption tests were carried out using chitosan strip and hybrid nanocomposite strip at different time intervals. Amount of chromium adsorbed by chitosan strip and chitosan-magnetite nanocomposite strip from aqueous solution was evaluated using UV-visible spectroscopy. The results confirm that the heavy metal removal efficiency of chitosan-magnetite nanocomposite strip is 92.33 %, which is higher when compared to chitosan strip, which is 29.39 %.

  16. Electrode/Dielectric Strip For High-Energy-Density Capacitor

    NASA Technical Reports Server (NTRS)

    Yen, Shiao-Ping S.

    1994-01-01

    Improved unitary electrode/dielectric strip serves as winding in high-energy-density capacitor in pulsed power supply. Offers combination of qualities essential for high energy density: high permittivity of dielectric layers, thinness, and high resistance to breakdown of dielectric at high electric fields. Capacitors with strip material not impregnated with liquid.

  17. Magnetic domain-wall dynamics in wide permalloy strips

    NASA Astrophysics Data System (ADS)

    Estévez, Virginia; Laurson, Lasse

    2016-02-01

    Domain walls in soft permalloy strips may exhibit various equilibrium micromagnetic structures depending on the width and thickness of the strip, ranging from the well-known transverse and vortex walls in narrow and thin strips to double and triple vortex walls recently reported in wider strips [V. Estévez and L. Laurson, Phys. Rev. B 91, 054407 (2015), 10.1103/PhysRevB.91.054407]. Here, we analyze the field driven dynamics of such domain walls in permalloy strips of widths from 240 nm up to 6 μ m , using the known equilibrium domain wall structures as initial configurations. Our micromagnetic simulations show that the domain wall dynamics in wide strips is very complex, and depends strongly on the geometry of the system, as well as on the magnitude of the driving field. We discuss in detail the rich variety of the dynamical behaviors found, including dynamic transitions between different domain wall structures, periodic dynamics of a vortex core close to the strip edge, transitions towards simpler domain wall structures of the multi-vortex domain walls controlled by vortex polarity, and the fact that for some combinations of the strip geometry and the driving field the system cannot support a compact domain wall.

  18. Using Comic Strips as a Book Report Alternative

    ERIC Educational Resources Information Center

    Reading Teacher, 2012

    2012-01-01

    Comic strips are great to share with parents, younger students, and peers. This article presents an activity where students use a six-paneled comic strip to summarize a story. This activity allows for multiple interpretations and enhances comprehension by drawing attention to story elements.

  19. Creating Comic Strips. ArtsEdge Curricula, Lessons and Activities.

    ERIC Educational Resources Information Center

    State, Chico

    In society, information/ideas are communicated through various media (words, symbols, illustrations, etc.). When analyzing comic strips, it is noticeable that each has a different style, point of view, setting, plot, and summary, communicated not only through words, but through illustrations and style--creating comic strips can summarize various…

  20. Air-stripping effects on cell growth with volatile substrates.

    PubMed

    Singh, N; Hill, G A

    1987-09-01

    The removal of substate molecules from aerobic microbial cultures is due to both consumption by microorganisms and stripping by the air stream. The air stripping component can be described by a constant parameter for low concentrations of volatile substrates. This air stripping parameter was found to have a value of 0.0033 h(-1) for phenol molecules in a typical fermentation situation. The determination and inclusion of this constant is important for modeling microbial growth. For Pseudomonas putida growing on phenol, it is shown that air stripping is responsible for all of the original decline in phenol concentration. Further, the kinetic inhibition constant is sensitive to both the value of the air stripping parameter and the value of the initial concentration of bacteria. The experimental data for Pseudomonas putida growing on phenol was fit by a non-linear, least squares technique to isolate the inhibition constant between 100 and 600 ppm.

  1. [Descemet's stripping automated endothelial keratoplasty (DSAEK)].

    PubMed

    Cursiefen, C; Kruse, F E

    2009-10-01

    Penetrating keratoplasty has been the gold standard for the surgical treatment of corneal endothelial pathologies, but tremendous progress has been made in recent years in improving the technology of posterior lamellar keratoplasty techniques such as Descemet's stripping automated endothelial keratoplasty (DSAEK). This progress is shown by a literature review using PubMed sources and our own clinical and experimental data. Posterior lamellar keratoplasty using a microkeratome is a reliable surgical technique for Fuchs' endothelial dystrophy and pseudophakic bullous keratopathy. Visual rehabilitation is faster with lamellar compared with penetrating keratoplasty, but final visual acuity seems to be a bit reduced. Posterior lamellar keratoplasty techniques such as DSAEK may replace penetrating keratoplasty as the gold standard for treating a large proportion of corneal endothelial pathologies. PMID:19798505

  2. Groundwater air stripping: Effect on water toxicity

    SciTech Connect

    Eldridge, R.B.; Simpson, C.W.; Elliott, D.J.

    1995-02-01

    An air stripping unit was designed to reduce groundwater hydrocarbon content and biotoxicity to acceptable levels. A pilot plant study was conducted to determine the water treatability and to optimize the commercial unit design conditions. A measurement of the pilot plant effluent toxicity was obtained from {open_quotes}Microtox{close_quotes} analysis and rigorous bio-assays. These results indicated that reduction of the water hydrocarbon content to permitted discharge limits was accompanied by the elimination of water toxicity. The Onda mass transfer model was used to prepare the commercial unit design. A post-installation evaluation indicated that the model gave a good representation of the commercial unit performance. Toxicity reductions observed in the pilot plant were also observed in the commercial unit. 3 refs., 5 figs., 3 tabs.

  3. Robotic dry stripping of airframes - Phase II

    NASA Astrophysics Data System (ADS)

    Pauli, Robert A.; Wittenberg, Art M.

    1989-03-01

    This paper describes a program for the development of a dust-free closed-cycle robotic system for dry stripping of airframes, designed to insure dust-free work environment and reduce plastic-media loss, the contamination risk, and the media inventory requirement. Phase I of the program involved building a prototype of the proposed robotic arm and its dust enclosure to prove basic automation concepts, showing reasonable paint removal rate from a curved surface, and establishing that the process is dust-free and recovers plastic media in a closed-cycle fashion. This paper contains calculations on the effect of different blasting parameters in order to determine optimum values required for the completion of Phase I. Also presented is the progress achieved by the Phase II of the program, which is to prove the total concept by building the complete system and demonstrating its capability.

  4. Method and apparatus for corrugating strips

    DOEpatents

    Day, Jack R.; Curtis, Charles H.

    1983-01-01

    The invention relates to a method and a machine for transversely corrugating a continuous strip of metallic foil. The product foil comprises a succession of alternately disposed corrugations, each defining in cross section, a major segment of a circle. The foil to be corrugated is positioned to extend within a vertical passage in the machine. The walls of the passage are heated to promote the desired deformation of the foil. Foil-deforming rollers are alternately passed obliquely across the passage to respectively engage transverse sections of the foil. The rollers and their respective section of deformed foil comprise a stacked assembly which is moved incrementally through the heated passageway. As the assembly emerges from the passageway, the rollers spill from the corrugated foil and are recovered for re-use.

  5. Method and apparatus for corrugating strips

    DOEpatents

    Day, J.R.; Curtis, C.H.

    1981-10-27

    The invention relates to a method and a machine for transversely corrugating a continuous strip of metallic foil. The product foil comprises a succession of alternately disposed corrugations, each defining in a cross section, a major segment of a circle. The foil to be corrugated is positioned to extend within a vertical passage in the machine. The walls of the passage are heated to promote the desired deformation of the foil. Foil-deforming rollers are alternately passed obliquely across the passage to respectively engage transverse sections of the foil. The rollers and their respective section of deformed foil comprise a stacked assembly which is moved incrementally through the heated passageway. As the assembly emerges from the passageway, the rollers spill from the corrugated foil and are recovered for re-use.

  6. [Obstetrical handbook in comic strip form].

    PubMed

    1998-04-01

    An obstetric handbook was created in comic strip form in cooperation with the Ministry of Health in the region of Segou, Mali, for training of traditional midwives living far from community health centers. The drawings illustrate pregnancies at risk that the midwife should be able to identify in order to advise women to stay near the health facility before onset of labor. Drawings indicate pregnancies that are at risk because of the following: small stature, limping as a result of polio or sciatic paralysis, high parity, prior cesarean delivery, heart disease, overly large uterus, or prior stillbirth. Serious complications requiring referral to a health service are also illustrated and include severe anemia, genital bleeding, and signs of toxemia and edema. The midwife should accompany the woman during transport.

  7. Multistability of spontaneously curved anisotropic strips

    NASA Astrophysics Data System (ADS)

    Giomi, Luca; Mahadevan, L.

    2010-03-01

    Multistable structures are elastic objects, typically composite plates or shells, with more than one stable conformation. The common tape measure or the steel band enclosed inside the bright fabric cover of a ``slap bracelet'', are classic examples of plates that exhibit two stable configurations: folded and unfolded. Multistable structures have many potential applications, from the simple construction of objects of adjustable size to the design of mechanical devices that switch between a discrete number of states. In this talk I will discuss multistability in a quasi-one-dimensional anisotropic strip. The reduced dimensionality allows an exact analytical treatment in terms of the classic F"oppl - von K'arm'an theory of plates. In the conclusions I will comment on the possible occurrence of multistability in biological materials.

  8. Dynamic underground stripping. Innovative technology summary report

    SciTech Connect

    1995-04-01

    Dynamic Underground Stripping (DUS) is a combination of technologies targeted to remediate soil and ground water contaminated with organic compounds. DUS is effective both above and below the water table and is especially well suited for sites with interbedded sand and clay layers. The main technologies comprising DUS are steam injection at the periphery of a contaminated area to heat permeable subsurface areas, vaporize volatile compounds bound to the soil, and drive contaminants to centrally located vacuum extraction wells; electrical heating of less permeable sediments to vaporize contaminants and drive them into the steam zone; and underground imaging such as Electrical Resistance Tomography to delineate heated areas to ensure total cleanup and process control. A full-scale demonstration was conducted on a gasoline spill site at Lawrence Livermore National Laboratory in Livermore, California from November 1992 through December 1993.

  9. Prevalence of intestinal parasites among the population of the Gaza Strip, Palestine.

    PubMed

    Mezeid, Nahla; Shaldoum, Fayez; Al-Hindi, Adnan I; Mohamed, Fatma S A; Darwish, Zakia E A

    2014-01-01

    Intestinal parasitic diseases in Gaza Strip are a significant health problem. The main aim of this study is to determine the prevalence of parasitic infection among patients in the five governorates of the Gaza Strip. A cross-sectional parasitological survey was conducted on 600 patients. Stool specimens were examined microscopically for the presence of parasite eggs or larvae/cysts per wet amount by the saline iodine and formol-ether concentration method. Of 600 subjects examined, 245 (40.8%) were infected with one or more intestinal parasites. Entamoeba histolytica/dispar and Giardia lamblia were the most prevalent parasites amongst the population (28.8%), (9.5%). Female patients demonstrated a higher prevalence of intestinal parasitic infections (42.7%) than males (39.0%). However, this difference was not significant (p>0.05). According to occupation, the rate of infection was highest among farmers (56.0%), followed by employers (44.2%) with laborers showing the lowest rate (30.17%). These differences in occupational prevalence were found to be statistically significant (p<0.05). The present study demonstrates that intestinal protozoan infections are still a public health problem in the Gaza strip, with Entamoeba and Giardia infections being most common. Therefore, it is necessary to develop effective prevention and control strategies, including health education and environmental sanitation improvement.

  10. Early-Time UV Spectroscopy of Stripped-Envelope Supernovae: A New Window

    NASA Astrophysics Data System (ADS)

    Filippenko, Alex

    2014-10-01

    We propose to continue our Cycle 19 and 20 Target-of-Opportunity (ToO) programs to obtain three early-time UV spectra of a stripped-envelope core-collapse supernova (SN Ib or SN Ic), starting well before maximum brightness. The underlying nature of these objects, from the mass-loss process stripping the envelope to the details of the explosion mechanism, remain mysterious. Connections to gamma-ray bursts and X-ray flashes further motivate this study. Many high-redshift SNe are being found in deep transient surveys, but the ability to distinguish between thermonuclear Type Ia SNe and stripped-envelope core-collapse SNe requires thorough knowledge of the latter at UV wavelengths. By comparing the evolution of the spectra as the photosphere recedes to deeper layers of the ejecta with our time series of spectral models, we will gain a better understanding of the explosion, and possibly of the progenitor star. Specifically, we may be able to determine the metal content of the progenitor through comparisons with our spectral models, and we should be able to probe the degree of mixing during the explosion. The heterogeneity seen in stripped-envelope SNe will allow us to choose objects with different characteristics than the ones observed in Cycles 19-20, gaining further insights into this unique class of cosmic explosion. We need to seize this opportunity now, while we still have access to the space UV, and indeed the UV is the Cycle 22 priority of HST.

  11. Early Time UV Spectroscopy of a Stripped-Envelope Supernova: A New Window

    NASA Astrophysics Data System (ADS)

    Filippenko, Alex

    2012-10-01

    We propose to continue our Cycle 19 program and obtain 4 epochs of UV spectroscopy of a Target of Opportunity stripped-envelope core-collapse supernova during 2 weeks roughly centered on maximum brightness. The underlying nature of these objects, from the mass-loss process stripping the envelope to the details of the explosion mechanism, remain mysterious. Connections to gamma-ray bursts and X-ray flashes further motivate this study. Many supernovae {SNe} of all types will be found in future high-redshift transient surveys, but the ability to distinguish between thermonuclear Type Ia SNe and stripped-envelope core-collapse SNe will require thorough knowledge of the latter, especially at UV wavelengths. The spectra will lead to several new insights. By comparing the evolution of the spectra as the photosphere recedes to deeper layers of the ejecta with our time series of spectral models, we will gain a better understanding of the explosion, and possibly of the progenitor star. Specifically, we may be able to determine the metal content of the progenitor through comparisons with our spectral models, and we should be able to probe the degree of mixing during the explosion. With coordinated observations of the SN in the optical and near-IR using our ground-based programs, we will be able to comprehensively characterize the nature of the emission radiated by these SNe. The heterogeneity seen in stripped-envelope SNe will allow us to choose a transient with different characteristics than the one to be observed in Cycle 19, gaining further insights into this unique class of cosmic explosion.

  12. Membrane air stripping utilizing a plate and frame configuration

    SciTech Connect

    Boswell, S.T.

    1991-01-01

    Membrane air stripping has recently been proposed as a possible method to remove volatile organic chemicals (VOCs) and radon from drinking water supplies. Current and anticipated regulatory requirements, driven by health consequences, make the removal of these contaminants mandatory. This work examines the use of plate and frame membrane air stripping for the removal of VOCs and radon from a water supply. The theoretical basis of membrane air stripping and a literature review are included. The advantages of membrane air stripping versus other methods of removal, as well as the advantages of a plate and frame configuration versus a hollow fiber configuration for membrane air stripping are discussed. Multiple regression/correlation techniques are used to model mass transfer coefficients and fluid resistances. An economic evaluation is performed using the developed models. The costs of comparable membrane and packed tower air stripping systems are 4.86 cents per thousand gallons versus 4.36 cents per thousand gallons, respectively. This work indicates that plate and frame membrane air stripping may, in fact, prove to be an economical alternative to packed tower aeration and carbon adsorption for the removal of VOCs and radon.

  13. Characterization and Calibration of Large Area Resistive Strip Micromegas Detectors

    NASA Astrophysics Data System (ADS)

    Lösel, Philipp; ATLAS Muon Collaboration

    2016-07-01

    Resistive strip Micromegas detectors have been tested extensively as small detectors of about 10×10 cm2 in size and they work reliably at high rates of 100 kHz/cm2 and above. Tracking resolution well below 100 μm has been observed for 100 GeV muons and pions. Micromegas detectors are meanwhile proposed as large area muon precision trackers of 2-3 m2 in size. To investigate possible differences between small and large detectors, a 1 m2 detector with 2048 resistive strips at a pitch of 450 μm was studied in the LMU Cosmic Ray Measurement Facility (CRMF) using two 4×2.2 m2 large Monitored Drift Tube (MDT) chambers for cosmic muon reference tracking. A segmentation of the resistive strip anode plane in 57.6 mm×93 mm large areas has been realized by the readout of 128 strips with one APV25 chip each and by eleven 93 mm broad trigger scintillators placed along the readout strips. This allows for mapping of homogeneity in pulse height and efficiency, determination of signal propagation along the 1 m long anode strips and calibration of the position of the anode strips.

  14. Method and apparatus for improved FCC spent catalyst stripping

    SciTech Connect

    Harandi, M.N.; Owen, H.; Pappal, D.A.; Schipper, P.A.

    1990-11-20

    This patent describes a fluid catalytic cracking process. It comprises: mixing a hydrocarbon feed with a cracking catalyst in the lower section of the reactor riser of a riser-reactor fluid catalytic cracking unit; passing the mixture through the length of the reactor riser under conversion conditions whereby the hydrocarbon is catalytically cracked and the catalyst is deactivated; separating the cracked product and the deactivated catalyst; charging the deactivated catalyst to an annular stripping zone. The stripping zone positioned around the concentric with a lower section of the reactor riser; withdrawing the deactivated catalyst from the stripping zone; oxidatively regenerating the withdrawn deactivated catalyst in a regeneration zone remote from and in valved communication with the reactor riser, at a temperature above that of the stripping zone under oxygen-deficient conditions to generate a flue gas containing carbon monoxide; partially separating catalyst from the flue gas to evolve a hot flue gas stream containing entrained regenerated catalyst; flowing the hot flue gas stream containing entrained regenerated catalyst to a heat exchange conduit positioned within the stripping zone above; and mixing the flue gas stream containing regenerated catalyst above with oxygen-containing gas to exothermically convert carbon monoxide to carbon dioxide within the heat exchange conduit positioned within the stripping zone to indirectly transfer thermal energy from the closed heat exchange conduit to the stripping zone.

  15. A preference test for sweet taste that uses edible strips.

    PubMed

    Smutzer, Gregory; Patel, Janki Y; Stull, Judith C; Abarintos, Ray A; Khan, Neiladri K; Park, Kevin C

    2014-02-01

    A novel delivery method is described for the rapid determination of taste preferences for sweet taste in humans. This forced-choice paired comparison approach incorporates the non-caloric sweetener sucralose into a set of one-inch square edible strips for the rapid determination of sweet taste preferences. When compared to aqueous sucrose solutions, significantly lower amounts of sucralose were required to identify the preference for sweet taste. The validity of this approach was determined by comparing sweet taste preferences obtained with five different sucralose-containing edible strips to a set of five intensity-matched sucrose solutions. When compared to the solution test, edible strips required approximately the same number of steps to identify the preferred amount of sweet taste stimulus. Both approaches yielded similar distribution patterns for the preferred amount of sweet taste stimulus. In addition, taste intensity values for the preferred amount of sucralose in strips were similar to that of sucrose in solution. The hedonic values for the preferred amount of sucralose were lower than for sucrose, but the taste quality of the preferred sucralose strip was described as sweet. When taste intensity values between sucralose strips and sucralose solutions containing identical amounts of taste stimulus were compared, sucralose strips produced a greater taste intensity and more positive hedonic response. A preference test that uses edible strips for stimulus delivery should be useful for identifying preferences for sweet taste in young children, and in clinical populations. This test should also be useful for identifying sweet taste preferences outside of the lab or clinic. Finally, edible strips should be useful for developing preference tests for other primary taste stimuli and for taste mixtures.

  16. The looped adhesive strip: An example of coplanar delamination interaction

    NASA Technical Reports Server (NTRS)

    Bottega, W. J.

    1990-01-01

    The phenomenon of peeling and debonding of thin layers is a subject of interest to those concerned with adhesives, thin films, and layered materials. In recent years much attention has been focused on such problems as a result of increased interest and application of advanced composites and thin film coatings. A related problem which is of interest for its own sake but also represents a simple example of a tangled adhesive strip and of coplanar delamination interaction, is the problem of a looped adhesive strip. This is the subject of the present study. Researchers consider here the problem of an elastic strip which possesses an adherend on (at least) one of its surfaces. If the strip is deformed so that two portions of such a surface are brought into contact, a position of the strip becomes bonded and a loop is formed. Researchers are interested in determining the equilibrium configuration of such a strip and investigating the behavior of the strip when its edges are pulled apart. The problem is approached as a moving interior boundary problem in the calculus of variations with the strip modeled as an inextensible elastica and the bond strength characterized by its surface energy. A Griffith type energy criterion is employed for debonding, and solutions corresponding to the problem of interest obtained. The solution obtained will be seen to predict the interesting phenomenon of bond point propagation, as well as the more standard peeling type behavior. Numerical results demonstrating the phenomena of interest are presented as well and will be seen to reveal both stable and unstable propagation of the boundaries of the bonded portion of the strip, depending upon the loading conditions.

  17. The water crisis in the gaza strip: prospects for resolution.

    PubMed

    Weinthal, E; Vengosh, A; Marei, A; Kloppmann, W

    2005-01-01

    Israel and the Palestinian Authority share the southern Mediterranean coastal aquifer. Long-term overexploitation in the Gaza Strip has resulted in a decreasing water table, accompanied by the degradation of its water quality. Due to high levels of salinity and nitrate and boron pollution, most of the ground water is inadequate for both domestic and agricultural consumption. The rapid rate of population growth in the Gaza Strip and dependence upon ground water as a single water source present a serious challenge for future political stability and economic development. Here, we integrate the results of geochemical studies and numerical modeling to postulate different management scenarios for joint management between Israel and the Palestinian Authority. The chemical and isotopic data show that most of the salinity phenomena in the Gaza Strip are derived from the natural flow of saline ground water from Israel toward the Gaza Strip. As a result, the southern coastal aquifer does not resemble a classic "upstream-downstream" dispute because Israel's pumping of the saline ground water reduces the salinization rates of ground water in the Gaza Strip. Simulation of different pumping scenarios using a monolayer, hydrodynamic, two-dimensional model (MARTHE) confirms the hypothesis that increasing pumping along the Gaza Strip border combined with a moderate reduction of pumping within the Gaza Strip would improve ground water quality within the Gaza Strip. We find that pumping the saline ground water for a source of reverse-osmosis desalination and then supplying the desalinated water to the Gaza Strip should be an essential component of a future joint management strategy between Israel and the Palestinian Authority.

  18. The Effects of Power Production and Strip Mining on Local Navajo Populations. Lake Powell Research Project Bulletin Number 22, June 1976.

    ERIC Educational Resources Information Center

    Callaway, Donald G.; And Others

    In an effort to evaluate the impact of the 1972-73 Navajo Generating Station at Page, Arizona and the strip mine at Black Mesa on the Navajo Reservation, areas adjacent to each of these operations were surveyed (N=134 and 60 respectively) and compared with two control populations (N=60 from the rural area of Red Lake and 58 from the wagework area…

  19. Enhancement Of Water-Jet Stripping Of Foam

    NASA Technical Reports Server (NTRS)

    Cosby, Steven A.; Shockney, Charles H.; Bates, Keith E.; Shalala, John P.; Daniels, Larry S.

    1995-01-01

    Improved robotic high-pressure-water-jet system strips foam insulation from parts without removing adjacent coating materials like paints, primers, and sealants. Even injects water into crevices and blind holes to clean out foam, without harming adjacent areas. Eliminates both cost of full stripping and recoating and problem of disposing of toxic solutions used in preparation for coating. Developed for postflight refurbishing of aft skirts of booster rockets. System includes six-axis robot provided with special end effector and specially written control software, called Aftfoam. Adaptable to cleaning and stripping in other industrial settings.

  20. Intelligent control of robotic paint stripping using color vision feedback

    NASA Astrophysics Data System (ADS)

    Harvey, D. N.; Rogers, T. W.

    1993-08-01

    The paper describes a color-based machine vision system which is capable of functioning as a real-time process control system for a robotic work cell currently being developed for stripping paint from both large and small aircraft. The system is based on hue, saturation, and intensity representation of the image data and on rapid analysis techniques and is capable of differentiating between painted, primed, stripped, and roughened aircraft surfaces. These techniques were tested on a large number of aircraft paint schemes under actual stripping conditions, and were found to be fast and robust enough for real-time process control.

  1. Autoionization of He atoms by partially stripped ion impact

    SciTech Connect

    Otranto, S.; Olson, R.E.

    2005-08-15

    A study of the autoionization process induced by partially stripped ion impact is performed. Electron spectra in momentum space are predicted within a classical model for partially stripped ions. The results are compared with those obtained for pure Coulomb-like projectiles. A quantum-mechanical extension of the Barrachina-Macek model is proposed for partially stripped projectiles. Structure on the electron angular distribution arising in quantum and classical treatments is identified and compared. The presence of rainbow scattering interference is observed in the binary ring profile of the outgoing autoionized electrons for positive-ion impact.

  2. Automated strip mine and reclamation mapping from ERTS. [Ohio coal

    NASA Technical Reports Server (NTRS)

    Pettyjohn, W. A.; Rogers, R. H.; Reed, L. E.

    1974-01-01

    In response to the urgent need for a faster and more economical means of generating strip mine and reclamation maps, a study was conducted to evaluate the suitability of using ERTS computer compatible tape for automatic mapping. The procedure uses computer target spectral recognition techniques as a basis for classification. The area encompassed by this investigation includes five counties in eastern Ohio that comprise nearly 7,500 square kilometers (3,000 square miles). The counties have been disrupted by coal mining since the early 1800's, and strip mining has been practiced in all of them. The environmental effects of strip mining are also discussed.

  3. Reductive stripping process for uranium recovery from organic extracts

    DOEpatents

    Hurst, F.J. Jr.

    1983-06-16

    In the reductive stripping of uranium from an organic extractant in a uranium recovery process, the use of phosphoric acid having a molarity in the range of 8 to 10 increases the efficiency of the reductive stripping and allows the strip step to operate with lower aqueous to organic recycle ratios and shorter retention time in the mixer stages. Under these operating conditions, less solvent is required in the process, and smaller, less expensive process equipment can be utilized. The high strength H/sub 3/PO/sub 4/ is available from the evaporator stage of the process.

  4. Reductive stripping process for uranium recovery from organic extracts

    DOEpatents

    Hurst, Jr., Fred J.

    1985-01-01

    In the reductive stripping of uranium from an organic extractant in a uranium recovery process, the use of phosphoric acid having a molarity in the range of 8 to 10 increases the efficiency of the reductive stripping and allows the strip step to operate with lower aqueous to organic recycle ratios and shorter retention time in the mixer stages. Under these operating conditions, less solvent is required in the process, and smaller, less expensive process equipment can be utilized. The high strength H.sub.3 PO.sub.4 is available from the evaporator stage of the process.

  5. Rapid analytical detection of microcystins using gold colloidal immunochromatographic strip.

    PubMed

    Pyo, Dongjin; Choi, Jongchon; Hong, Jonguk; Oo, Hlaing Hlaing

    2006-01-01

    Routine monitoring of microcystin in natural waters is difficult because the concentration of the toxin is low and the detection method is usually complicated. We developed a rapid analytical detection method of microcystins gold colloidal immunochromatogeraphic strip. The sensitivity of the strip is about 1 ng/mL for microcystin LR; it is able to distinguish visually among different concentrations of microcystin solutions. The developed gold colloidal strip can detect microcystins within 15 min and does not require either a complicated extraction system, or trained or qualified experts.

  6. A survey of surveys

    SciTech Connect

    Kent, S.M.

    1994-11-01

    A new era for the field of Galactic structure is about to be opened with the advent of wide-area digital sky surveys. In this article, the author reviews the status and prospects for research for 3 new ground-based surveys: the Sloan Digital Sky Survey (SDSS), the Deep Near-Infrared Survey of the Southern Sky (DENIS) and the Two Micron AU Sky Survey (2MASS). These surveys will permit detailed studies of Galactic structure and stellar populations in the Galaxy with unprecedented detail. Extracting the information, however, will be challenging.

  7. JELLYFISH: EVIDENCE OF EXTREME RAM-PRESSURE STRIPPING IN MASSIVE GALAXY CLUSTERS

    SciTech Connect

    Ebeling, H.; Stephenson, L. N.; Edge, A. C.

    2014-02-01

    Ram-pressure stripping by the gaseous intracluster medium has been proposed as the dominant physical mechanism driving the rapid evolution of galaxies in dense environments. Detailed studies of this process have, however, largely been limited to relatively modest examples affecting only the outermost gas layers of galaxies in nearby and/or low-mass galaxy clusters. We here present results from our search for extreme cases of gas-galaxy interactions in much more massive, X-ray selected clusters at z > 0.3. Using Hubble Space Telescope snapshots in the F606W and F814W passbands, we have discovered dramatic evidence of ram-pressure stripping in which copious amounts of gas are first shock compressed and then removed from galaxies falling into the cluster. Vigorous starbursts triggered by this process across the galaxy-gas interface and in the debris trail cause these galaxies to temporarily become some of the brightest cluster members in the F606W passband, capable of outshining even the Brightest Cluster Galaxy. Based on the spatial distribution and orientation of systems viewed nearly edge-on in our survey, we speculate that infall at large impact parameter gives rise to particularly long-lasting stripping events. Our sample of six spectacular examples identified in clusters from the Massive Cluster Survey, all featuring M {sub F606W} < –21 mag, doubles the number of such systems presently known at z > 0.2 and facilitates detailed quantitative studies of the most violent galaxy evolution in clusters.

  8. Jellyfish: Evidence of Extreme Ram-pressure Stripping in Massive Galaxy Clusters

    NASA Astrophysics Data System (ADS)

    Ebeling, H.; Stephenson, L. N.; Edge, A. C.

    2014-02-01

    Ram-pressure stripping by the gaseous intracluster medium has been proposed as the dominant physical mechanism driving the rapid evolution of galaxies in dense environments. Detailed studies of this process have, however, largely been limited to relatively modest examples affecting only the outermost gas layers of galaxies in nearby and/or low-mass galaxy clusters. We here present results from our search for extreme cases of gas-galaxy interactions in much more massive, X-ray selected clusters at z > 0.3. Using Hubble Space Telescope snapshots in the F606W and F814W passbands, we have discovered dramatic evidence of ram-pressure stripping in which copious amounts of gas are first shock compressed and then removed from galaxies falling into the cluster. Vigorous starbursts triggered by this process across the galaxy-gas interface and in the debris trail cause these galaxies to temporarily become some of the brightest cluster members in the F606W passband, capable of outshining even the Brightest Cluster Galaxy. Based on the spatial distribution and orientation of systems viewed nearly edge-on in our survey, we speculate that infall at large impact parameter gives rise to particularly long-lasting stripping events. Our sample of six spectacular examples identified in clusters from the Massive Cluster Survey, all featuring M F606W < -21 mag, doubles the number of such systems presently known at z > 0.2 and facilitates detailed quantitative studies of the most violent galaxy evolution in clusters. Based on observations made with the NASA/ESA Hubble Space Telescope, obtained at the Space Telescope Science Institute, which is operated by the Association of Universities for Research in Astronomy, Inc., under NASA contract NAS 5-26555. These observations are associated with programs GO-10491, -10875, -12166, and -12884.

  9. Unstable strip resonators with misaligned circular mirrors.

    PubMed

    Santana, C; Felsen, L B

    1978-08-01

    The waveguide approach developed previously by the authors is here applied to unstable strip resonators with unequal sharp-edged circular mirrors that have been tilted with respect to the resonator axis. An equivalent resonator with nontilted mirrors is defined wherein the mirror edges form asymmetrically placed terminations of the open-ended transverse waveguide. The eigenmode losses are found by calculating the waveguide mode reflection coefficients for each pair of edges and inserting these into the previously derived resonance equation. Numerical calculations for the low-loss detached mode are presented for the special case of symmetrical resonators with equally tilted mirrors since results for this configuration, for moderately large Fresnel numbers, have previously been given by Sanderson and Streifer. Our solutions agree with those of Sanderson and Streifer but accommodate also the range of large Fresnel numbers. It is found that misalignment introduces additional ripples into the power loss vs Fresnel number curves. A ray-optical interpretation in terms of edge diffraction is shown to account for this behavior. PMID:20203787

  10. An improved rolled strip pulse forming line

    NASA Astrophysics Data System (ADS)

    Li, Song; Qian, Bao-Liang; Yang, Han-Wu; Gao, Jing-Ming; Liu, Zhao-Xi

    2013-06-01

    The rolled strip pulse forming line (RSPFL) has advantages of compactness, portability, and long pulse achievability which could well meet the requirements of industrial application of the pulse power technology. In this paper, an improved RSPFL with an additional insulator between the grounded conductors is investigated numerically and experimentally. Results demonstrate that the jitter on the flat-top of the output voltage waveform is reduced to 3.8% due to the improved structure. Theoretical analysis shows that the electromagnetic coupling between the conductors of the RSPFL strongly influences the output voltage waveform. Therefore, the new structure was designed to minimize the detrimental effect of the electromagnetic coupling. Simulation results show that the electromagnetic coupling can be efficiently reduced in the improved RSPFL. Experimental results illustrate that the improved RSPFL, with dimensions and weight of Φ 290 × 250 mm and 16 kg, when used as a simple pulse forming line, could generate a well shaped quasi-square pulse with output power of hundreds of MW and pulse duration of 250 ns. Importantly, the improved RSPFL was successfully used as a Blumlein pulse forming line, and a 10.8 kV, 260 ns quasi-square pulse was obtained on a 2 Ω dummy load. Experiments show reasonable agreement with numerical analysis.

  11. Semiautomatic reconstruction of strip-shredded documents

    NASA Astrophysics Data System (ADS)

    De Smet, Patrick; De Bock, Johan; Philips, Wilfried

    2005-03-01

    Until recently, the forensic or investigative reconstruction of shredded documents has always been dismissed as an important but unsolvable problem. Manual reassembly of the physical remnants can always be considered, but for large amounts of shreds this problem can quickly become an intangible task that requires vast amounts of time and/or personnel. In this paper we propose and discuss several image processing techniques that can be used to enable the reconstruction of strip-shredded documents stored within a database of digital images. The technical content of this paper mainly revolves around the use of feature based matching and grouping methods for classifying the initial database of shreds, and the subsequent procedure for computing more accurate pairing results for the obtained classes of shreds. Additionally, we discuss the actual reassembly of the different shreds on top of a common image canvas. We illustrate our algorithms with example matching and reconstruction results obtained for a real shred database containing various types of shredded document pages. Finally, we briefly discuss the impact of our findings on secure document management strategies and the possibilities for applying the proposed techniques within the context of forensic investigation.

  12. Optimization of Strip Isolation for Silicon Sensors

    NASA Astrophysics Data System (ADS)

    Valentan, M.; Bergauer, T.; Dragicevic, M.; Friedl, M.; Irmler, C.; Huemer, E.; Treberspurg, W.

    Precision machines like electron-positron-colliders and b-factories demand for low material budget and high position resolution when it comes to particle tracking. A low material budget can be achieved by using thin double-sided silicon detectors (DSSDs) and lightweight construction. Since thin sensors give low signals, one has to be very careful to achieve high charge collection efficiency, which requires an appropriate sensor design. In this paper we present a detailed investigation of different p-stop patterns used for strip isolation on the n-side of double-sided microstrip sensors with n-type bulk. We designed test sensors featuring the common p-stop, the atoll p-stop and a combined p-stop pattern, and for every pattern four different geometric layouts were considered. These sensors were tested at the Super Proton Synchrotron (SPS) at CERN (Geneva, Switzerland) in a 120 GeV/c hadron beam. Then they were irradiated to 700 kGy with a 60Co source and subsequently tested in the same beam as before. One geometric layout of the atoll p-stop pattern turned out to perform best, both before and after irradiation. The conclusions of these tests will be applied to the design of DSSDs for the Belle II experiment at KEK (Tsukuba, Japan).

  13. Weber Blockade Theory of Magnetoresistance Oscillations in Superconducting Strips

    NASA Astrophysics Data System (ADS)

    Pekker, David; Refael, Gil; Goldbart, Paul M.

    2011-07-01

    Recent experiments on the conductance of thin, narrow superconducting strips have found periodic fluctuations, as a function of the perpendicular magnetic field, with a period corresponding to approximately two flux quanta per strip area [A. Johansson , Phys. Rev. Lett. 95, 116805 (2005)PRLTAO0031-900710.1103/PhysRevLett.95.116805]. We argue that the low-energy degrees of freedom responsible for dissipation correspond to vortex motion. Using vortex-charge duality, we show that the superconducting strip behaves as the dual of a quantum dot, with the vortices, magnetic field, and bias current respectively playing the roles of the electrons, gate voltage, and source-drain voltage. In the bias-current versus magnetic-field plane, the strip conductance displays regions of small vortex conductance (i.e., small electrical resistance) that we term “Weber blockade” diamonds, which are dual to Coulomb blockade diamonds in quantum dots.

  14. Analysis of a unidirectional, symmetric buffer strip laminate with damage

    NASA Technical Reports Server (NTRS)

    Dharani, L. R.; Goree, J. G.

    1984-01-01

    A method for predicting the fracture behavior of hybrid buffer strip laminates is presented in which the classical shear-lag model is used to represent the shear stress distribution between adjacent fibers. The method is demonstrated by applying it to a notched graphite/epoxy laminate, and the results show clearly the manner in which the most efficient combination of buffer strip properties can be selected in order to arrest the crack. The ultimate failure stress of the laminate is plotted vs the buffer strip width. It is shown that in the case of graphite-epoxy and S-glass epoxy laminates, the optimum buffer strip spacing to width ratio should be about four to one.

  15. 40. STEEL, INGOTS, ON INGOT BUGGIES, WAIT TO BE STRIPPED. ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    40. STEEL, INGOTS, ON INGOT BUGGIES, WAIT TO BE STRIPPED. STRIPPER CRANE CAN BE SEEN AT THE END OF THE RAILROAD TRACKS, AT CENTER. - Corrigan, McKinney Steel Company, 3100 East Forty-fifth Street, Cleveland, Cuyahoga County, OH

  16. Stability of flow over axisymmetric bodies with porous suction strips

    NASA Technical Reports Server (NTRS)

    Nayfeh, A. H.; Reed, H. L.

    1982-01-01

    Linear triple deck, closed form solutions for mean-flow quantities are developed for axisymmetric incompressible flow past a body with porous strips. The solutions account for upstream influence and are linear superpositions of the flow past the body without suction plus the perturbations due to the suction strips. Flow past the suctionless body is calculated using the Transition Analysis Program System, and a simple linear optimization scheme to determine number, spacing, and mass flow rate through the strips on an axisymmetric body is developed using the linear, triple-deck, closed-form solutions. The theory is demonstrated by predicting optimal strip distributions, and the effect of various adverse pressure-gradient situations on stability is studied.

  17. Electroplating and stripping copper on molybdenum and niobium

    NASA Technical Reports Server (NTRS)

    Power, J. L.

    1978-01-01

    Molybdenum and niobium are often electroplated and subsequently stripped of copper. Since general standard plating techniques produce poor quality coatings, general procedures have been optimized and specified to give good results.

  18. Results of Laboratory Testing of Advanced Power Strips: Preprint

    SciTech Connect

    Earle, L.; Sparn, B.

    2012-08-01

    This paper describes the results of a laboratory investigation to evaluate the technical performance of advanced power strip (APS) devices when subjected to a range of home entertainment center and home office usage scenarios.

  19. A tidally stripped stellar component of the Magellanic bridge

    SciTech Connect

    Nidever, David L.; Monachesi, Antonela; Bell, Eric F.; Majewski, Steven R.; Beaton, Rachael L.; Muñoz, Ricardo R. E-mail: rmunoz@das.uchile.cl

    2013-12-20

    Deep photometry of the Small Magellanic Cloud (SMC) stellar periphery (R = 4°, 4.2 kpc) is used to study its line-of-sight depth with red clump (RC) stars. The RC luminosity function is affected little by young (≲1 Gyr) blue-loop stars in these regions because their main-sequence counterparts are not observed in the color-magnitude diagrams. The SMCs eastern side is found to have a large line-of-sight depth (∼23 kpc) while the western side has a much shallower depth (∼10 kpc), consistent with previous photographic plate photometry results. We use a model SMC RC luminosity function to deconvolve the observed RC magnitudes and construct the density function in distance for our fields. Three of the eastern fields show a distance bimodality with one component at the 'systemic' ∼67 kpc SMC distance and a second component at ∼55 kpc. Our data are not reproduced well by the various extant Magellanic Cloud and Stream simulations. However, the models predict that the known H I Magellanic Bridge (stretching from the SMC eastward toward the Large Magellanic Cloud, LMC) has a decreasing distance with angle from the SMC and should be seen in both the gaseous and stellar components. From comparison with these models, we conclude that the most likely explanation for our newly identified ∼55 kpc stellar structure in the eastern SMC is a stellar counterpart of the H I Magellanic Bridge that was tidally stripped from the SMC ∼200 Myr ago during a close encounter with the LMC. This discovery has important implications for microlensing surveys of the SMC.

  20. High Pressure Water Stripping Using Multi-Orifice Nozzles

    NASA Technical Reports Server (NTRS)

    Hoppe, David T.

    1998-01-01

    The use of multi-orifice rotary nozzles not only increases the speed and stripping effectiveness of high pressure water blasting systems, but also greatly increases the complexity of selecting and optimizing the operating parameters. The rotational speed of the nozzle must be coupled with the transverse velocity of the nozzle as it passes across the surface of the substrate being stripped. The radial and angular positions of each orifice must be included in the analysis of the nozzle configuration. Since orifices at the outer edge of the nozzle head move at a faster rate than the orifice located near the center, the energy impact force of the water stream from the outer orifice is spread over a larger area than the water streams from the inner orifice. Utilizing a larger diameter orifice in the outer radial positions increases the energy impact to compensate for its wider force distribution. The total flow rate from the combination of orifices must be monitored and kept below the pump capacity while choosing an orifice to insert in each position. The energy distribution from the orifice pattern is further complicated since the rotary path of all orifices in the nozzle head pass through the center section, contributing to the stripping in this area while only the outer most orifice contributes to the stripping in the shell area at the extreme outside edge of the nozzle. From t he outer most shell to the center section, more orifices contribute to the stripping in each progressively reduced diameter shell. With all these parameters to configure and each parameter change affecting the others, a computer model was developed to track and coordinate these parameters. The computer simulation responds by graphically indicating the cumulative affect from each parameter selected. The results from the proper choices in parameters is a well designed, highly efficient stripping system. A poorly chosen set of parameters will cause the nozzle to strip aggressively in some areas

  1. High Pressure Water Stripping Using Multi-Orifice Nozzles

    NASA Technical Reports Server (NTRS)

    Hoppe, David

    1999-01-01

    The use of multi-orifice rotary nozzles greatly increases the speed and stripping effectiveness of high pressure water blasting systems, but also greatly increases the complexity of selecting and optimizing the operating parameters. The rotational speed of the nozzle must be coupled with its transverse velocity as it passes across the surface of the substrate being stripped. The radial and angular positions of each orifice must be included in the analysis of the nozzle configuration. Orifices at the outer edge of the nozzle head move at a faster rate than the orifices located near the center. The energy transmitted to the surface from the impact force of the water stream from an outer orifice is therefore spread over a larger area than energy from an inner orifice. Utilizing a larger diameter orifice in the outer radial positions increases the total energy transmitted from the outer orifice to compensate for the wider distribution of energy. The total flow rate from the combination of all orifices must be monitored and should be kept below the pump capacity while choosing orifice to insert in each position. The energy distribution from the orifice pattern is further complicated since the rotary path of all the orifices in the nozzle head pass through the center section. All orifices contribute to the stripping in the center of the path while only the outer most orifice contributes to the stripping at the edge of the nozzle. Additional orifices contribute to the stripping from the outer edge toward the center section. With all these parameters to configure and each parameter change affecting the others, a computer model was developed to track and coordinate these parameters. The computer simulation graphically indicates the cumulative affect from each parameter selected. The result from the proper choices in parameters is a well designed, highly efficient stripping system. A poorly chosen set of parameters will cause the nozzle to strip aggressively in some areas

  2. Ultralow Concentration Mercury Treatment Using Chemical Reduction and Air Stripping

    SciTech Connect

    Looney, B.B.

    2001-05-21

    Field, laboratory and engineering data confirmed the efficacy of chemical reduction and air stripping as an ultralow concentration mercury treatment concept for water containing Hg(II). The simple process consists of dosing the water with low levels of stannous chloride (Sn(II)) to cover the mercury to Hg degrees. This mercury species can easily be removed from the water by air stripping or sparging.

  3. Detection of Bacteria Using Inkjet-Printed Enzymatic Test Strips

    PubMed Central

    2015-01-01

    Low-cost diagnostics for drinking water contamination have the potential to save millions of lives. We report a method that uses inkjet printing to copattern an enzyme–nanoparticle sensor and substrate on a paper-based test strip for rapid detection of bacteria. A colorimetric response is generated on the paper substrate that allows visual detection of contamination without the need for expensive instrumentation. These strips demonstrate a viable nanomanufacturing strategy for low-cost bacterial detection. PMID:25318086

  4. The diagonal strip system in the Macro experiment

    NASA Astrophysics Data System (ADS)

    Devicenzi, M.; Lipari, P.; Martellotti, G.; Pellizzoni, G.

    1988-11-01

    The Macro scintillation counter modular system with streamer tubes and track-etch detectors is presented, and the characteristics, manufacturing, and assembling of its pick-up strips are described. The strips are composed of thin conducting plates 31 mm long, spaced 2.6 mm apart, and bonded on a 1 mm polyvinyl chloride (PVC) ribbon with a grounded metal surface on the other side of the ribbon. The manufacturing is done by bonding the aluminum elements on the PVC ribbon.

  5. Detection of bacteria using inkjet-printed enzymatic test strips.

    PubMed

    Creran, Brian; Li, Xiaoning; Duncan, Bradley; Kim, Chang Soo; Moyano, Daniel F; Rotello, Vincent M

    2014-11-26

    Low-cost diagnostics for drinking water contamination have the potential to save millions of lives. We report a method that uses inkjet printing to copattern an enzyme-nanoparticle sensor and substrate on a paper-based test strip for rapid detection of bacteria. A colorimetric response is generated on the paper substrate that allows visual detection of contamination without the need for expensive instrumentation. These strips demonstrate a viable nanomanufacturing strategy for low-cost bacterial detection.

  6. 26 CFR 1.1286-2 - Stripped inflation-protected debt instruments.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... 26 Internal Revenue 11 2014-04-01 2014-04-01 false Stripped inflation-protected debt instruments... Losses § 1.1286-2 Stripped inflation-protected debt instruments. Stripped inflation-protected debt instruments. If a Treasury Inflation-Protected Security is stripped under the Department of the...

  7. 26 CFR 1.1286-2 - Stripped inflation-protected debt instruments.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... 26 Internal Revenue 11 2013-04-01 2013-04-01 false Stripped inflation-protected debt instruments... Losses § 1.1286-2 Stripped inflation-protected debt instruments. Stripped inflation-protected debt instruments. If a Treasury Inflation-Protected Security is stripped under the Department of the...

  8. 26 CFR 1.1286-2 - Stripped inflation-indexed debt instruments.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... 26 Internal Revenue 11 2012-04-01 2012-04-01 false Stripped inflation-indexed debt instruments. 1... Losses § 1.1286-2 Stripped inflation-indexed debt instruments. Stripped inflation-indexed debt instruments. If a Treasury Inflation-Indexed Security is stripped under the Department of the...

  9. Analysis of mass transfer performance in an air stripping tower

    SciTech Connect

    Chung, T.W.; Lai, C.H.; Wu, H.

    1999-10-01

    The carryover of working solution in a traditional stripping tower is of serious concern in real applications. A U-shaped spray tower to prevent carryover has been designed to study the stripping of water vapor from aqueous desiccant solutions of 91.8 to 95.8 wt% triethylene glycol. In this study, water vapor was removed from the diluted desiccant solution by heating the solution and stripping it with the ambient air. Therefore, the solution was concentrated to a desired concentration. This spray tower was capable of handling air flow rates from 3.2 to 5.13 kg/min and liquid flow rates from 1.6 to 2.76 kg/min. Since the literature data on air stripping towers are limited, studies on the mass transfer coefficient and other mass transfer parameters were carried out in this study. Under the operating conditions, the overall mass transfer coefficient calculated from the experimental data varied from 0.053 to 0.169 mol/m{sup 3}{center{underscore}dot}s. These corresponded to heights of a transfer unit of 2.3 to 0.71 m, respectively. The rates of stripping in this spray tower were typically varied from 2.28 to 12.15 kg H{sub 2}O/h. A correlation of the mass transfer coefficient for the air stripping process was also developed in this study.

  10. Ammonia stripping for enhanced biomethanization of piggery wastewater.

    PubMed

    Zhang, Lei; Lee, Yong-Woo; Jahng, Deokjin

    2012-01-15

    In this study, the effects of ammonia removal by air stripping as a pretreatment on the anaerobic digestion of piggery wastewater were investigated. Ammonia stripping results indicated that ammonia removal was strongly dependent on pH and aeration rate, and the ammonia removal rate followed the pseudo-first-order kinetics. A significant enhancement of biomethanization was observed for wastewaters of which ammonia was air-stripped at pH 9.5 and pH 10.0. The methane productivity increased from 0.23 ± 0.08 L CH(4)/Ld of the control (raw piggery wastewater) to 0.75 ± 0.11 L CH(4)/Ld (ammonia-stripped at pH 9.5) and 0.57 ± 0.04 L CH(4)/Ld (ammonia-stripped at pH 10.0). However, the improvement of methane production from the piggery wastewater pretreated at pH 11.0 was negligible compared to the control, which was thought to be due to the high concentration of sodium ions supplied from sodium hydroxide for pH adjustment. From these results, it was concluded that ammonia removal through air stripping at the alkaline pH could be a viable option for preventing the failure of anaerobic digestion of the raw piggery wastewater. Additionally, it was also found that a high concentration of sodium ion originated from sodium hydroxide for pH adjustment inhibited methane production.

  11. Preliminary Design and Evaluation of Portable Electronic Flight Progress Strips

    NASA Technical Reports Server (NTRS)

    Doble, Nathan A.; Hansman, R. John

    2002-01-01

    There has been growing interest in using electronic alternatives to the paper Flight Progress Strip (FPS) for air traffic control. However, most research has been centered on radar-based control environments, and has not considered the unique operational needs of the airport air traffic control tower. Based on an analysis of the human factors issues for control tower Decision Support Tool (DST) interfaces, a requirement has been identified for an interaction mechanism which replicates the advantages of the paper FPS (e.g., head-up operation, portability) but also enables input and output with DSTs. An approach has been developed which uses a Portable Electronic FPS that has attributes of both a paper strip and an electronic strip. The prototype flight strip system uses Personal Digital Assistants (PDAs) to replace individual paper strips in addition to a central management interface which is displayed on a desktop computer. Each PDA is connected to the management interface via a wireless local area network. The Portable Electronic FPSs replicate the core functionality of paper flight strips and have additional features which provide a heads-up interface to a DST. A departure DST is used as a motivating example. The central management interface is used for aircraft scheduling and sequencing and provides an overview of airport departure operations. This paper will present the design of the Portable Electronic FPS system as well as preliminary evaluation results.

  12. Rigorous LiDAR Strip Adjustment with Triangulated Aerial Imagery

    NASA Astrophysics Data System (ADS)

    Zhang, Y. J.; Xiong, X. D.; Hu, X. Y.

    2013-10-01

    This paper proposes a POS aided LiDAR strip adjustment method. Firstly, aero-triangulation of the simultaneously obtained aerial images is conducted with a few photogrammetry-specific ground control points. Secondly, LiDAR intensity images are generated from the reflectance signals of laser foot points, and conjugate points are automatically matched between the LiDAR intensity image and the aero-triangulated aerial image. Control points used in LiDAR strip adjustment are derived from these conjugate points. Finally, LiDAR strip adjustment of real data is conducted with the POS aided LiDAR strip adjustment method proposed in this paper, and comparison experiment using three-dimensional similarity transformation method is also performed. The results indicate that the POS aided LiDAR strip adjustment method can significantly correct the planimetric and vertical errors of LiDAR strips. The planimetric correction accuracy is higher than average point distance while the vertical correction accuracy is comparable to that of the result of aero-triangulation. Moreover, the proposed method is obliviously superior to the traditional three-dimensional similarity transformation method.

  13. Development of a thin steel strip casting process. Final report

    SciTech Connect

    Williams, R.S.

    1994-04-01

    This is a comprehensive effort to develop direct strip casting to the point where a pilot scale program for casting carbon steel strip could be initiated. All important aspects of the technology were being investigated, however the program was terminated early due to a change in the business strategy of the primary contractor, Armco Inc. (focus to be directed at specialty steels, not low carbon steel). At termination, the project was on target on all milestones and under budget. Major part was casting of strip at the experiment casting facility. A new caster, capable of producing direct cast strip of up to 12 in. wide in heats of 1000 and 3000 lb, was used. A total of 81 1000-1200 lb heats were cast as well as one test heat of 3000 lb. Most produced strip of from 0.016 to 0.085 in. thick. Process reliability was excellent for short casting times; quality was generally poor from modern hot strip mill standards, but the practices necessary for good surface quality were identified.

  14. Interpretation of the human skin biotribological behaviour after tape stripping

    PubMed Central

    Pailler-Mattei, C.; Guerret-Piécourt, C.; Zahouani, H.; Nicoli, S.

    2011-01-01

    The present study deals with the modification of the human skin biotribological behaviour after tape stripping. The tape-stripping procedure consists in the sequential application and removal of adhesive tapes on the skin surface in order to remove stratum corneum (SC) layers, which electrically charges the skin surface. The skin electric charges generated by tape stripping highly change the skin friction behaviour by increasing the adhesion component of the skin friction coefficient. It has been proposed to rewrite the friction adhesion component as the sum of two terms: the first classical adhesion term depending on the intrinsic shear strength, τ0, and the second term depending on the electric shear strength, τelec. The experimental results allowed to estimate a numerical value of the electric shear strength τelec. Moreover, a plan capacitor model with a dielectric material inside was used to modelize the experimental system. This physical model permitted to evaluate the friction electric force and the electric shear strength values to calculate the skin friction coefficient after the tape stripping. The comparison between the experimental and the theoretical value of the skin friction coefficient after the tape stripping has shown the importance of the electric charges on skin biotribological behaviour. The static electric charges produced by tape stripping on the skin surface are probably able to highly modify the interaction of formulations with the skin surface and their spreading properties. This phenomenon, generally overlooked, should be taken into consideration as it could be involved in alteration of drug absorption. PMID:21227961

  15. Synthesizing 3D Surfaces from Parameterized Strip Charts

    NASA Technical Reports Server (NTRS)

    Robinson, Peter I.; Gomez, Julian; Morehouse, Michael; Gawdiak, Yuri

    2004-01-01

    We believe 3D information visualization has the power to unlock new levels of productivity in the monitoring and control of complex processes. Our goal is to provide visual methods to allow for rapid human insight into systems consisting of thousands to millions of parameters. We explore this hypothesis in two complex domains: NASA program management and NASA International Space Station (ISS) spacecraft computer operations. We seek to extend a common form of visualization called the strip chart from 2D to 3D. A strip chart can display the time series progression of a parameter and allows for trends and events to be identified. Strip charts can be overlayed when multiple parameters need to visualized in order to correlate their events. When many parameters are involved, the direct overlaying of strip charts can become confusing and may not fully utilize the graphing area to convey the relationships between the parameters. We provide a solution to this problem by generating 3D surfaces from parameterized strip charts. The 3D surface utilizes significantly more screen area to illustrate the differences in the parameters and the overlayed strip charts, and it can rapidly be scanned by humans to gain insight. The selection of the third dimension must be a parallel or parameterized homogenous resource in the target domain, defined using a finite, ordered, enumerated type, and not a heterogeneous type. We demonstrate our concepts with examples from the NASA program management domain (assessing the state of many plans) and the computers of the ISS (assessing the state of many computers). We identify 2D strip charts in each domain and show how to construct the corresponding 3D surfaces. The user can navigate the surface, zooming in on regions of interest, setting a mark and drilling down to source documents from which the data points have been derived. We close by discussing design issues, related work, and implementation challenges.

  16. A continuous flow evaluation of the galvanic stripping process

    SciTech Connect

    Barrera-Godinez, J.A.; O`Keefe, T.J.

    1999-09-01

    The concept of galvanically stripping cations such as Fe{sup 3+}, Cu{sup 2+}, Pb{sup 2+}, and Au{sup 3+} from organic solvents using solid metal reductants has been demonstrated on a batch test basis in a number of previous studies. In this research the first evaluation of a continuous flow system for the process was made, with Fe{sup 3+} removal from D2EHPA being the primary objective. The effect of operation type (separate or simultaneous stripping), the iron concentration in the organic feed, the organic flow rate, the aqueous-to-organic volume ratio (A/O), the metal reductant (pure zinc vs lead-zinc alloy), the reductant surface area and acidity of the stripping phase on the iron and zinc removal percentages, and the process rate and stoichiometry were evaluated by using continuous flow mixed reactors. The steady-state condition was reached in all the tests after about 40 minutes. In particular, the rate of iron removal was found to be greater for simultaneous than for separate galvanic stripping. A longer organic residence time produced a slightly lower rate, but increasing the aqueous-to-organic ratio augmented the overall rate. The pH of the aqueous phase controlled the iron and zinc stripping percentages, and increasing the reductant surface area increased the iron removal percent. In general, the results agreed with previous batch-type studies on galvanic stripping, and the data indicated that the galvanic stripping process rate and reactor behavior can be assessed by using mechanically agitated continuous flow mixed reactors.

  17. Cardiovascular, diabetes, and cancer strips: evidences, mechanisms, and classifications

    PubMed Central

    Wu, Qing-Hua; Hu, Da-Yi

    2014-01-01

    Objectives To report and name firstly that there are cardiovascular disease (CVD), diabetes mellitus (DM) and cancers (CDC) strips; and disclose their mechanisms, classifications, and clinical significances. Study design Narrative and systematic review study and interpretive analysis. Methods Data sources and study selection: to collect and present related evidences on CDC strips from evidence-based, open-access, both Chinese- and English-language literatures in recent 10 years on clinical trials from PubMed according to keywords “CVD, DM and cancers” as well as authors’ extensive clinical experience with the treatment of more than fifty thousands of patients with CVD, diabetes and cancers over the past decades, and analyze their related mechanisms and categories which based on authors’ previous works. Data extraction: data were mainly extracted from 48 articles which are listed in the reference section of this review. Qualitative, quantitative and mixed data were included, narratively and systematically reviewed. Results With several conceptual and technical breakthrough, authors present related evidences on CDC strips, these are, CVD and DM, DM and cancers, cancers and CVD linked, respectively; And “Bad SEED” +/– “bad soil” theory or doctrine may explain this phenomenon due to “internal environmental injure, abnormal or unbalance” in human body resulting from the role of risk factors (RFs) related multi-pathways and multi-targets, which including organ & tissue (e.g., vascular-specific), cell and gene-based mechanisms. Their classifications include main strips/type B, and Branches/type A as showed by tables and figures in this article. Conclusions There are CDC strips and related mechanisms and classifications. CDC strips may help us to understand, prevent, and control related common non-communicable diseases (NCDs) as well as these high risk strips. PMID:25276377

  18. A Strong-Lens Survey in AEGIS: the influence of large scalestructure

    SciTech Connect

    Moustakas, Leonidas A.; Marshall, Phil; Newman, Jeffrey A.; Coil,Alison L.; Cooper, Michael C.; Davis, Marc; Fassnacht, Christopher D.; Guhathakurta, Puragra; Hopkins, Andrew; Koekemoer, Anton; Konidaris,Nicholas P.; Lotz, Jennifer M.; Willmer, Christopher N. A.

    2006-10-13

    We report on the results of a visual search for galaxy-scale strong gravitational lenses over 650 arcmin{sup 2} of HST/ACS (F606W and F814W) imaging in the DEEP2-Extended Groth Strip (EGS). In addition to a previously-known Einstein Cross also found by our search (the 'Cross', HSTJ141735+52264, z{sub lens} = 0.8106, z{sub source} = 3.40), we identify two new strong galaxy-galaxy lenses with multiple extended arcs. The first, HSTJ141820+52361 (the 'Dewdrop'; z{sub lens} = 0.5798), lenses two distinct extended sources into two pairs of arcs (z{sub source} = 0.9818), while the second, HSTJ141833+52435 (the 'Anchor'; z{sub lens} = 0.4625), produces a single pair of arcs (z{sub lens} not yet known). Four less convincing arc/counter-arc and two-image lens candidates are also found and presented for completeness. Lenses are found in a both underdense and overdense local environments, as characterized by a robust measure, 1+{delta}{sub 3}, a normalized density that uses the distance to the third nearest neighbor. All three definite lenses are fit reasonably well by simple singular isothermal ellipsoid models including external shear, giving {chi}{sub {nu}}{sup 2} values close to unity. These shears are much greater than those implied by a simple consideration of the three-dimensional convergence and shear from galaxies along the line of sight, where each galaxy is approximated by a singular isothermal sphere halo truncated at 200 h{sup -1} kpc. This shows how a realistic treatment of galaxies and the large scale structure they are embedded in is necessary, and that simply characterizing the very-local environment may be insufficient.

  19. A Strong-Lens Survey in AEGIS: the Influence of Large Scale Structure

    SciTech Connect

    Moustakas, Leonidas A.; Marshall, Phil J.; Newman, Jeffrey A.; Coil, Alison L.; Cooper, Michael C.; Davis, Marc; Fassnacht, Christopher D.; Guhathakurta, Puragra; Hopkins, Andrew; Koekemoer, Anton; Konidaris, Nicholas P.; Lotz, Jennifer M.; Willmer, Christopher N.A.; /Arizona U., Astron. Dept. - Steward Observ.

    2006-07-14

    We report on the results of a visual search for galaxy-scale strong gravitational lenses over 650 arcmin2 of HST/ACS imaging in the Extended Groth Strip (EGS). These deep F606W- and F814W-band observations are in the DEEP2-EGS field. In addition to a previously-known Einstein Cross also found by our search (the ''Cross'', HSTJ141735+52264, with z{sub lens} = 0.8106 and a published z{sub source} = 3.40), we identify two new strong galaxy-galaxy lenses with multiple extended arcs. The first, HSTJ141820+52361 (the ''Dewdrop''; z{sub lens} = 0.5798), lenses two distinct extended sources into two pairs of arcs (z{sub source} = 0.9818 by nebular [O{sub II}] emission), while the second, HSTJ141833+52435 (the ''Anchor''; z{sub lens} = 0.4625), produces a single pair of arcs (source redshift not yet known). Four less convincing arc/counter-arc and two-image lens candidates are also found and presented for completeness. All three definite lenses are fit reasonably well by simple singular isothermal ellipsoid models including external shear, giving {chi}{sub {nu}}{sup 2}values close to unity. Using the three-dimensional line-of-sight (LOS) information on galaxies from the DEEP2 data, we calculate the convergence and shear contributions {kappa}{sub los} and {gamma}{sub los} to each lens, assuming singular isothermal sphere halos truncated at 200 h{sup -1} kpc. These are compared against a robust measure of local environment, {delta}{sub 3}, a normalized density that uses the distance to the third nearest neighbor. We find that even strong lenses in demonstrably underdense local environments may be considerably affected by LOS contributions, which in turn, under the adopted assumptions, may be underestimates of the effect of large scale structure.

  20. Method of making steel strapping and strip

    SciTech Connect

    Robert D. Reilly

    2000-02-16

    The technical progress obtained for this time frame consisted of the awarding of two contracts for determination of metallurgical parameters for heat treatment of strapping and strip which are unavailable from current technology and/or published data in this field. The two contractors were Bricmont, Inc. and the Department of Materials Science and Engineering at the Technological Institute of Northwestern University, Evanston, IL. Phase 1 of the two stage contract with Bricmont, Inc. which provided a computer analysis of the cooling rates of a typical range of thickness' of strapping was completed. This study was developed for the purpose of determining the time parameters for quenching low carbon steels to a martensitic microstructure within the time frame of the design of the proposed process. It also provides design criteria for cooling to ambient for the total process. This data is required for Phase 2 of the Bricmont proposal which completes the design and specifications of the total heat treating and cooling system for the process. This becomes the basis for developing the cost and space requirements for this component of the production line. The authors do not intend to award Phase 2 until the work done at Northwestern University discussed hereafter is completed. On or about May 1, 1999 a contract for a project entitled ``Effects of Steel Composition and Quench Rate on Microstructure and Mechanical Properties of Strapping'' to be performed at the Department of Materials Science and Engineering was awarded. The delay in initiating this project was due to the legal interpretation and final agreement of the intellectual provisions of the award by the author's attorneys, Northwestern's attorneys and the legal representative in the Chicago office of the DOE. The work to date includes rapid quenching of a number of different steel compositions and microstructure on an existing drop quench test apparatus. It was initially assumed that this procedure would simulate

  1. Stripped Elliptical Galaxies as Probes of ICM Physics: I. Tails, Wakes, and Flow Patterns in and Around Stripped Ellipticals

    NASA Astrophysics Data System (ADS)

    Roediger, E.; Kraft, R. P.; Nulsen, P. E. J.; Forman, W. R.; Machacek, M.; Randall, S.; Jones, C.; Churazov, E.; Kokotanekova, R.

    2015-06-01

    Elliptical cluster galaxies are progressively stripped of their atmospheres due to their motion through the intracluster medium (ICM). Deep X-ray observations reveal the fine-structure of the galaxy’s remnant atmosphere and its gas tail and wake. This fine-structure depends on dynamic conditions (galaxy potential, initial gas contents, orbit through the host cluster), orbital stage (early infall, pre-/post-pericenter passage), and ICM plasma properties (thermal conductivity, viscosity, magnetic field structure). We aim to disentangle dynamic and plasma effects in order to use stripped ellipticals as probes of ICM plasma properties. This first paper of a series investigates the hydrodynamics of progressive gas stripping by means of inviscid hydrodynamical simulations. We distinguish a long-lasting initial relaxation phase and a quasi-steady stripping phase. During quasi-steady stripping, the ICM flow around the remnant atmosphere resembles the flow around solid bodies, including a “deadwater” region in the near wake. Gas is stripped from the remnant atmosphere predominantly at its sides via Kelvin-Helmholtz instabilities. The downstream atmosphere is largely shielded from the ICM wind and thus shaped into a tail. Observationally, both this “remnant tail” and the stripped gas in the wake can appear as a “tail”, but only in the wake can galactic gas mix with the ambient ICM. While the qualitative results are generic, the simulations presented here are tailored to the Virgo elliptical galaxy M89 (NGC 4552) for the most direct comparison to observations. Papers II and III of this series describe the effect of viscosity and compare to Chandra and XMM-Newton observations, respectively.

  2. STRIPPED ELLIPTICAL GALAXIES AS PROBES OF ICM PHYSICS. I. TAILS, WAKES, AND FLOW PATTERNS IN AND AROUND STRIPPED ELLIPTICALS

    SciTech Connect

    Roediger, E.; Kraft, R. P.; Nulsen, P. E. J.; Forman, W. R.; Machacek, M.; Randall, S.; Jones, C.; Kokotanekova, R.

    2015-06-10

    Elliptical cluster galaxies are progressively stripped of their atmospheres due to their motion through the intracluster medium (ICM). Deep X-ray observations reveal the fine-structure of the galaxy’s remnant atmosphere and its gas tail and wake. This fine-structure depends on dynamic conditions (galaxy potential, initial gas contents, orbit through the host cluster), orbital stage (early infall, pre-/post-pericenter passage), and ICM plasma properties (thermal conductivity, viscosity, magnetic field structure). We aim to disentangle dynamic and plasma effects in order to use stripped ellipticals as probes of ICM plasma properties. This first paper of a series investigates the hydrodynamics of progressive gas stripping by means of inviscid hydrodynamical simulations. We distinguish a long-lasting initial relaxation phase and a quasi-steady stripping phase. During quasi-steady stripping, the ICM flow around the remnant atmosphere resembles the flow around solid bodies, including a “deadwater” region in the near wake. Gas is stripped from the remnant atmosphere predominantly at its sides via Kelvin–Helmholtz instabilities. The downstream atmosphere is largely shielded from the ICM wind and thus shaped into a tail. Observationally, both this “remnant tail” and the stripped gas in the wake can appear as a “tail”, but only in the wake can galactic gas mix with the ambient ICM. While the qualitative results are generic, the simulations presented here are tailored to the Virgo elliptical galaxy M89 (NGC 4552) for the most direct comparison to observations. Papers II and III of this series describe the effect of viscosity and compare to Chandra and XMM-Newton observations, respectively.

  3. VTT's micron-scale silicon rib+strip waveguide platform

    NASA Astrophysics Data System (ADS)

    Aalto, Timo; Harjanne, Mikko; Cherchi, Matteo

    2016-05-01

    Silicon rib waveguides enable single-mode (SM) operation even with the combination of multi-micron core dimensions and high refractive index contrast. In such large waveguides the optical mode field is almost completely confined inside the Si core, which leads to small propagation losses and small polarization dependency. The unique SM condition of the rib waveguide also enables the use of an ultra-wide wavelength range, for example from 1.2 to <1.7 μm, without sacrificing either SM operation or low propagation loss. This makes micron-scale Si waveguides particularly well-suited for spectroscopy and extensive wavelength division multiplexing. However, rib waveguides require large bending radii, which lead to large circuit sizes. There are two solutions for this. So-called Euler bends in Si strip waveguides enable low-loss bends down to 1 μm bending radius with less than 0.1 dB/90° loss for both polarizations. Another alternative is a total-internal reflection mirror that can have loss as low as 0.1 dB for both polarizations in either strip or rib waveguides. The excitation of higher order modes in large strip waveguides is avoided by using adiabatic rib-strip converters and low-loss components. With rib and strip waveguides it is possible to reach a unique combination of low loss, extremely small footprint, small polarization dependency, ultra-wide bandwidth and tolerance to high optical powers.

  4. Politics of protest: people and strip mining in Western Maryland

    SciTech Connect

    Finnissey, J.C. Jr.

    1987-01-01

    The problem considered was that given the widespread grievances against strip mining in Western Maryland, what accounted for the lack of authoritative decisions being made within the State Capital to remedy the situation. This problem was studied from a power prospective. A power relationship may exist where there is a suppression of grievances through nondecision-making and thus there is an absence of both overt conflict and grievances. Cases were documented where the ownership or control of strip mining companies by absentee interests was masked. The strip-mining industry has portrayed itself as being local. Consequently, the fact that the area is being drained of its coal wealth is a nonissue, thwarting the possible enactment of ameliorative legislation requiring that the profits obtained by absentee interests be reinvested in businesses in the area, providing much longed for employment. The Citizens' Coalition on Surface Mining has attempted to organize the mountaineers in protesting against strip mining, and placing grievances on the political agenda for amelioration. The prospect for change in the short-term appeared dim given the indifference in the State Capital as evident in the lack or inadequate enforcement of existing regulations by state authorities; the indirect influence which the strip mining interests are perceived to have over legislators from the area and the retainer of a lobbyist by the Maryland Coal.

  5. Optimization of Focusing by Strip and Pixel Arrays

    SciTech Connect

    Burke, G J; White, D A; Thompson, C A

    2005-06-30

    Professor Kevin Webb and students at Purdue University have demonstrated the design of conducting strip and pixel arrays for focusing electromagnetic waves [1, 2]. Their key point was to design structures to focus waves in the near field using full wave modeling and optimization methods for design. Their designs included arrays of conducting strips optimized with a downhill search algorithm and arrays of conducting and dielectric pixels optimized with the iterative direct binary search method. They used a finite element code for modeling. This report documents our attempts to duplicate and verify their results. We have modeled 2D conducting strips and both conducting and dielectric pixel arrays with moment method and FDTD codes to compare with Webb's results. New designs for strip arrays were developed with optimization by the downhill simplex method with simulated annealing. Strip arrays were optimized to focus an incident plane wave at a point or at two separated points and to switch between focusing points with a change in frequency. We also tried putting a line current source at the focus point for the plane wave to see how it would work as a directive antenna. We have not tried optimizing the conducting or dielectric pixel arrays, but modeled the structures designed by Webb with the moment method and FDTD to compare with the Purdue results.

  6. Prototype indicator strip for tank ammunition. Final report

    SciTech Connect

    Bates, B.; Griest, W.

    1993-10-31

    Combustible nitrocellulose ordnance casings offer advantages of: light weight, low cost, low detectability, and quick cycling of rounds by immediate disposal. However, mechanical strength is degraded with time by the action of humidity and nitroester diffusion through the casing to adhesives. The primary development effort of this study is a means to detect nitroester migration to the crucial skive joint which binds an assortment of warhead choices to propellant casings. This work has developed a prototype colorimetric indicator strip which, when applied in a field environment, produces a purple tint proportional to casing nitroester concentration, and inversely proportional to remaining adhesive joint strength. This work addressed the three steps in indicator strip use: (1) A suggested protocol for indicator strip preparation was developed. Various coatings, support reagents, and backings were examined resulting in a choice of polyethylene tape coating over separate AB- and C-impregnated cellulose punches. Various methods of punch creation and impregnation were tried resulting in stirred aqueous solutions and suspensions of AB and C, respectively. (2) Suggested protocols for indicator strip application to lab backings and field casings were developed. After chemical stripper was applied to the alumina-polyurethane paint on casings, C and AB punches were stacked and double-tape sealed. (3) A means for indicator strip monitoring was developed. From known time of indicator reaction, casing humidity, and indicator color, a means for field concentration determination was determined. Lab time-lapse photography was used to calibrate the indicator at a single level of humidity.

  7. Grayscale gel lithography: From umlti-strips to responsive origami

    NASA Astrophysics Data System (ADS)

    Byun, Myunghwan; Hayward, Ryan; Santangelo, Christian

    2013-03-01

    Non-uniform swelling of hydrogel sheets with two-dimensional (2D) patterns of crosslink density has the potential to yield a rich array of three-dimensional (3D) structures, yet many of the design rules remain poorly understood. Here, we study the geometrically simple case of ``multi-strips'', consisting of alternating parallel strips of high and low crosslink density. These materials are patterned using sequential UV exposure of a photo-crosslinkable polymer film through two photomasks. We show that these materials deform by rolling around the axis perpendicular to the interface between the regions, with a characteristic dimension that depends on the strip width and sheet thickness. However, beyond a critical minimum strip width, the material remains flat, instead forming an anisotropically swelled state that provides fruitful information on the contrast in modulus between the two regions. We also consider the deformation of sheets patterned with multiple regions that define geometrically incompatible rolling axis. Finally, we discuss the formation of hinges based on symmetric tri-strips that can be used to defined fold patterns, yielding responsive gel origami structures.

  8. Gas stripping in galaxy clusters: a new SPH simulation approach

    NASA Astrophysics Data System (ADS)

    Jáchym, P.; Palouš, J.; Köppen, J.; Combes, F.

    2007-09-01

    Aims:The influence of a time-varying ram pressure on spiral galaxies in clusters is explored with a new simulation method based on the N-body SPH/tree code GADGET. Methods: We have adapted the code to describe the interaction of two different gas phases, the diffuse hot intracluster medium (ICM) and the denser and colder interstellar medium (ISM). Both the ICM and ISM components are introduced as SPH particles. As a galaxy arrives on a highly radial orbit from outskirts to cluster center, it crosses the ICM density peak and experiences a time-varying wind. Results: Depending on the duration and intensity of the ISM-ICM interaction, early and late type galaxies in galaxy clusters with either a large or small ICM distribution are found to show different stripping efficiencies, amounts of reaccretion of the extra-planar ISM, and final masses. We compare the numerical results with analytical approximations of different complexity and indicate the limits of the Gunn & Gott simple stripping formula. Conclusions: Our investigations emphasize the role of the galactic orbital history to the stripping amount. We discuss the contribution of ram pressure stripping to the origin of the ICM and its metallicity. We propose gas accumulations like tails, filaments, or ripples to be responsible for stripping in regions with low overall ICM occurrence. Appendix A is only available in electronic form at http://www.aanda.org

  9. A layer stripping approach for monitoring resistivity variations using surface magnetotelluric responses

    NASA Astrophysics Data System (ADS)

    Ogaya, Xènia; Ledo, Juanjo; Queralt, Pilar; Jones, Alan G.; Marcuello, Álex

    2016-09-01

    The resolution of surface-acquired magnetotelluric data is typically not sufficiently high enough in monitoring surveys to detect and quantify small resistivity variations produced within an anomalous structure at a given depth within the subsurface. To address this deficiency we present an approach, called "layer stripping", based on the analytical solution of the one-dimensional magnetotelluric problem to enhance the sensitivity of surface magnetotelluric responses to such subtle subsurface temporal variations in resistivity within e.g. reservoirs. Given a well-known geoelectrical baseline model of a reservoir site, the layer stripping approach aims to remove the effect of the upper, unchanging structures in order to simulate the time-varying magnetotelluric responses at depth. This methodology is suggested for monitoring all kinds of reservoirs, e.g. hydrocarbons, gas, geothermal, compress air storage, etc., but here we focus on CO2 geological storage. We study one-dimensional and three-dimensional resistivity variations in the reservoir layer and the feasibility of the method is appraised by evaluating the error of the approach and defining different detectability parameters. The geoelectrical baseline model of the Hontomín site (Spain) for CO2 geological storage in a deep saline aquifer is taken as our exemplar for studying the validity of the 1D assumption in a real scenario. We conclude that layer stripping could help detect resistivity variations and locate them in the space, showing potential to also sense unforeseen resistivity variations at all depths. The proposed approach constitutes an innovative contribution to take greater advantage of surface magnetotelluric data and to use the method as a cost-effective permanent monitoring technique in suitable geoelectrical scenarios.

  10. Semiquantitative determination of urinary glucose: comparison of home-made strip and routine tests.

    PubMed

    Koonakosit, R

    2000-03-01

    Glucose oxidase paper strips for semiquantitative determination of glucose in urine are commercially available but details of their preparation are not published. The purpose of this study was to produce such strips, using a coupled enzyme glucose oxidase-peroxidase reaction which would yield purple color with ortho-tolidine, and safranin upon dipping into urine containing glucose. In this present study, without any special equipment, special humidity and temperature control, the new reagent strip named R-strip could be successfully prepared in the atmospheric conditions of Thailand. R-strips were evaluated against random urine added with various amounts of glucose in comparison with a commercial strip (T-strip), Benedict's test, and a commercial tablet (C-tablet), routinely used in laboratories. The developed strips were found to be as specific as T-strip and more sensitive than other tests. PMID:10865423

  11. Strip casting with fluxing agent applied to casting roll

    DOEpatents

    Williams, Robert S.; O'Malley, Ronald J.; Sussman, Richard C.

    1997-01-01

    A strip caster (10) for producing a continuous strip (24) includes a tundish (12) for containing a melt (14), a pair of horizontally disposed water cooled casting rolls (22) and devices (29) for electrostatically coating the outer peripheral chill surfaces (44) of the casting rolls with a powder flux material (56). The casting rolls are juxtaposed relative to one another for forming a pouting basin (18) for receiving the melt through a teeming tube (16) thereby establishing a meniscus (20) between the rolls for forming the strip. The melt is protected from the outside air by a non-oxidizing gas passed through a supply line (28) to a sealing chamber (26). A preferred flux is boron oxide having a melting point of about 550.degree. C. The flux coating enhances wetting of the steel melt to the casting roll and dissolves any metal oxide formed on the roll.

  12. Development, prototyping and characterization of double sided silicon strip detectors

    NASA Astrophysics Data System (ADS)

    Topkar, Anita; Singh, Arvind; Aggarwal, Bharti; Kumar, Amit; Kumar, Arvind; Murali Krishna, L. V.; Das, D.

    2016-10-01

    Double sided DC-coupled silicon strip detectors with geometry of 65 mm×65 mm have been developed in India for nuclear physics experiments. The detectors have 64 P+ strips on the front side and 64 N+ strips on the backside with a pitch of 0.9 mm. These detectors were fabricated using a twelve mask layer process involving double sided wafer processing technology. Semiconductor process and device simulations were carried out in order to theoretically estimate the impact of important design and process parameters on the breakdown voltage of detectors. The performance of the first lot of prototype detectors has been studied using static characterization tests and using an alpha source. The characterization results demonstrate that the detectors have low leakage currents and good uniformity over the detector area of about 40 cm2. Overview of the detector design, fabrication process, simulation results and initial characterization results of the detectors are presented in this paper.

  13. T Strip Properties Fabricated by Powder Rolling Method

    NASA Astrophysics Data System (ADS)

    Hong, Jae-Keun; Lee, Chae-Hun; Kim, Jeoung-Han; Yeom, Jong-Taek; Park, Nho-Kwang

    In the present study, the characteristics of the Ti powders fabricated by Hydride-Dehydride (HDH) were analyzed in terms of particle shape, size and size distribution. Ti powders were subjected to roll compaction and their microstructure and green densities were evaluated in terms of particle size, powder morphology, roll gap and rolling speed. Effects of blending elements having different powder sizes on densification properties were analyzed. The strip thickness was proportional to the roll gap up to 0.9 mm and the density of titanium strip was decreased with the increase in roll gap. As the roll speed increased, the strip density and thickness were decreased by using -200 mesh Ti powder. However, the effect of rolling speed for -400 mesh Ti powder was not greater than that of -200 mesh powder. The highest density by 93% was achieved by using -400 mesh Ti powder at 0.1 mm roll gap, however edge cracks and alligator cracks were occurred.

  14. Strip casting with fluxing agent applied to casting roll

    DOEpatents

    Williams, R.S.; O`Malley, R.J.; Sussman, R.C.

    1997-07-29

    A strip caster for producing a continuous strip includes a tundish for containing a melt, a pair of horizontally disposed water cooled casting rolls and devices for electrostatically coating the outer peripheral chill surfaces of the casting rolls with a powder flux material. The casting rolls are juxtaposed relative to one another for forming a pouting basin for receiving the melt through a teeming tube thereby establishing a meniscus between the rolls for forming the strip. The melt is protected from the outside air by a non-oxidizing gas passed through a supply line to a sealing chamber. A preferred flux is boron oxide having a melting point of about 550 C. The flux coating enhances wetting of the steel melt to the casting roll and dissolves any metal oxide formed on the roll. 3 figs.

  15. Electrochemical Stripping Analysis of Organophosphate Pesticides and Nerve Agents

    SciTech Connect

    Liu, Guodong; Lin, Yuehe

    2005-03-17

    A sensitive electrochemical stripping voltammetric method for analyzing organophosphate (OP) compounds was developed using a carbon paste electrochemical (CPE) transducer. OPs strongly adsorb on a CPE surface and provide facile electrochemical quantitative methods for electroactive OP compounds. Operational parameters have been optimized, and the stripping voltammetric performance has been studied using square wave voltammetry. The adsorptive stripping voltammetric response is highly linear over the 1-60 μM methyl parathion range examined (2-min adsorption), with a detection limit of 0.05 μmol/L (10 min accumulation) and good precision (RSD=3.2%, n =10). These findings can lead to a widespread use of electrochemical sensors to detect OP contaminates.

  16. Performance studies of the CMS Strip Tracker before installation

    SciTech Connect

    Adam, W.; et al.

    2009-06-01

    In March 2007 the assembly of the Silicon Strip Tracker was completed at the Tracker Integration Facility at CERN. Nearly 15% of the detector was instrumented using cables, fiber optics, power supplies, and electronics intended for the operation at the LHC. A local chiller was used to circulate the coolant for low temperature operation. In order to understand the efficiency and alignment of the strip tracker modules, a cosmic ray trigger was implemented. From March through July 4.5 million triggers were recorded. This period, referred to as the Sector Test, provided practical experience with the operation of the Tracker, especially safety, data acquisition, power, and cooling systems. This paper describes the performance of the strip system during the Sector Test, which consisted of five distinct periods defined by the coolant temperature. Significant emphasis is placed on comparisons between the data and results from Monte Carlo studies.

  17. Distillation and Air Stripping Designs for the Lunar Surface

    NASA Technical Reports Server (NTRS)

    Boul, Peter J.; Lange, Kevin E.; Conger, Bruce; Anderson, Molly

    2009-01-01

    Air stripping and distillation are two different gravity-based methods, which may be applied to the purification of wastewater on the lunar base. These gravity-based solutions to water processing are robust physical separation techniques, which may be advantageous to many other techniques for their simplicity in design and operation. The two techniques can be used in conjunction with each other to obtain high purity water. The components and feed compositions for modeling waste water streams are presented in conjunction with the Aspen property system for traditional stage distillation models and air stripping models. While the individual components for each of the waste streams will vary naturally within certain bounds, an analog model for waste water processing is suggested based on typical concentration ranges for these components. Target purity levels for the for recycled water are determined for each individual component based on NASA s required maximum contaminant levels for potable water Distillation processes are modeled separately and in tandem with air stripping to demonstrate the potential effectiveness and utility of these methods in recycling wastewater on the Moon. Optimum parameters such as reflux ratio, feed stage location, and processing rates are determined with respect to the power consumption of the process. Multistage distillation is evaluated for components in wastewater to determine the minimum number of stages necessary for each of 65 components in humidity condensate and urine wastewater mixed streams. Components of the wastewater streams are ranked by Henry s Law Constant and the suitability of air stripping in the purification of wastewater in terms of component removal is evaluated. Scaling factors for distillation and air stripping columns are presented to account for the difference in the lunar gravitation environment. Commercially available distillation and air stripping units which are considered suitable for Exploration Life Support

  18. Experimental evidence that wildflower strips increase pollinator visits to crops

    PubMed Central

    Feltham, Hannah; Park, Kirsty; Minderman, Jeroen; Goulson, Dave

    2015-01-01

    Wild bees provide a free and potentially diverse ecosystem service to farmers growing pollination-dependent crops. While many crops benefit from insect pollination, soft fruit crops, including strawberries are highly dependent on this ecosystem service to produce viable fruit. However, as a result of intensive farming practices and declining pollinator populations, farmers are increasingly turning to commercially reared bees to ensure that crops are adequately pollinated throughout the season. Wildflower strips are a commonly used measure aimed at the conservation of wild pollinators. It has been suggested that commercial crops may also benefit from the presence of noncrop flowers; however, the efficacy and economic benefits of sowing flower strips for crops remain relatively unstudied. In a study system that utilizes both wild and commercial pollinators, we test whether wildflower strips increase the number of visits to adjacent commercial strawberry crops by pollinating insects. We quantified this by experimentally sowing wildflower strips approximately 20 meters away from the crop and recording the number of pollinator visits to crops with, and without, flower strips. Between June and August 2013, we walked 292 crop transects at six farms in Scotland, recording a total of 2826 pollinators. On average, the frequency of pollinator visits was 25% higher for crops with adjacent flower strips compared to those without, with a combination of wild and commercial bumblebees (Bombus spp.) accounting for 67% of all pollinators observed. This effect was independent of other confounding effects, such as the number of flowers on the crop, date, and temperature. Synthesis and applications. This study provides evidence that soft fruit farmers can increase the number of pollinators that visit their crops by sowing inexpensive flower seed mixes nearby. By investing in this management option, farmers have the potential to increase and sustain pollinator populations over time

  19. Experimental evidence that wildflower strips increase pollinator visits to crops.

    PubMed

    Feltham, Hannah; Park, Kirsty; Minderman, Jeroen; Goulson, Dave

    2015-08-01

    Wild bees provide a free and potentially diverse ecosystem service to farmers growing pollination-dependent crops. While many crops benefit from insect pollination, soft fruit crops, including strawberries are highly dependent on this ecosystem service to produce viable fruit. However, as a result of intensive farming practices and declining pollinator populations, farmers are increasingly turning to commercially reared bees to ensure that crops are adequately pollinated throughout the season. Wildflower strips are a commonly used measure aimed at the conservation of wild pollinators. It has been suggested that commercial crops may also benefit from the presence of noncrop flowers; however, the efficacy and economic benefits of sowing flower strips for crops remain relatively unstudied. In a study system that utilizes both wild and commercial pollinators, we test whether wildflower strips increase the number of visits to adjacent commercial strawberry crops by pollinating insects. We quantified this by experimentally sowing wildflower strips approximately 20 meters away from the crop and recording the number of pollinator visits to crops with, and without, flower strips. Between June and August 2013, we walked 292 crop transects at six farms in Scotland, recording a total of 2826 pollinators. On average, the frequency of pollinator visits was 25% higher for crops with adjacent flower strips compared to those without, with a combination of wild and commercial bumblebees (Bombus spp.) accounting for 67% of all pollinators observed. This effect was independent of other confounding effects, such as the number of flowers on the crop, date, and temperature. Synthesis and applications. This study provides evidence that soft fruit farmers can increase the number of pollinators that visit their crops by sowing inexpensive flower seed mixes nearby. By investing in this management option, farmers have the potential to increase and sustain pollinator populations over time

  20. Optical Möbius strips and twisted ribbon cloaks.

    PubMed

    Freund, Isaac

    2014-02-15

    Optical Möbius strips that surround points of circular polarization, C points, in a generic three-dimensional optical field are cloaked by lines of twisted ribbons attached to the C points. When cloaking occurs, the observable signed twist index that counts the number of half-twists (one or three), and also measures the handedness (right or left), of a generic Möbius strip is determined by the twisted ribbon cloaks. Although some cloaks can be detached, they can never all be removed.

  1. The application of satellite data in monitoring strip mines

    NASA Technical Reports Server (NTRS)

    Sharber, L. A.; Shahrokhi, F.

    1977-01-01

    Strip mines in the New River Drainage Basin of Tennessee were studied through use of Landsat-1 imagery and aircraft photography. A multilevel analysis, involving conventional photo interpretation techniques, densitometric methods, multispectral analysis and statistical testing was applied to the data. The Landsat imagery proved adequate for monitoring large-scale change resulting from active mining and land-reclamation projects. However, the spatial resolution of the satellite imagery rendered it inadequate for assessment of many smaller strip mines, in the region which may be as small as a few hectares.

  2. Sulfide-oxidizing bacteria: Their role during air-stripping

    SciTech Connect

    Dell`Orco, M.J.; Chadik, P.A.; Bitton, G.; Neumann, R.P.

    1998-10-01

    Air-stripping, used to remove hydrogen sulfide naturally present in many groundwater supplies, commonly causes sulfide-oxidizing bacteria to proliferate. The role of sulfide-oxidizing bacteria during air-stripping was investigated in a diffused-air pilot reactor modeled after an existing treatment facility. Visible bacterial filaments and biofilm developed within a few days and increased both the sulfide removed from and turbidity in the effluent. Total sulfide, dissolved oxygen, pH, and electrode potential were monitored at eight locations in the reactor to characterize the process.

  3. Design and development of equipment for laser wire stripping

    NASA Technical Reports Server (NTRS)

    Iceland, W. F.

    1977-01-01

    Three laser wire strippers have been built for the stripping of Kapton-insulated wire, the baseline wire of the space shuttle orbiter. The strippers are: (1) a bench-model stripper powered with a cw CO2 10.6-micron laser, (2) a hand-held stripper powered with a cw 1.06-micron Nd-YAG laser with an output of 5-7 watts, and (3) a hand-held stripper with a five-inch-long CO2 laser inside the stripping head.

  4. In-well vapor stripping drilling and characterization work plan

    SciTech Connect

    Koegler, K.J.

    1994-03-13

    This work plan provides the information necessary for drilling, sampling, and hydrologic testing of wells to be completed in support of a demonstration of the in-well vapor stripping system. The in-well vapor stripping system is a remediation technology designed to preferentially extract volatile organic compounds (VOCs) from contaminated groundwater by converting them to a vapor phase. Air-lift pumping is used to lift and aerate groundwater within the well. The volatiles escaping the aerated water are drawn off by a slight vacuum and treated at the surface while the water is allowed to infiltrate the vadose zone back to the watertable.

  5. A plane mirror experiment inspired by a comic strip

    NASA Astrophysics Data System (ADS)

    Lúcio Prados Ribeiro, Jair

    2016-01-01

    A comic strip about a plane mirror was used in a high school optics test, and it was perceived that a large portion of the students believed that the mirror should be larger than the object so the virtual image could be entirely visible. Inspired on the comic strip, an experimental demonstration with flat mirrors was developed, in order to readdress this topic learning. Students were encouraged to create their own investigation of the phenomenon with a simple instrumental apparatus and also suggest different experimental approaches.

  6. Graded pitch electromagnetic pump for thin strip metal casting systems

    DOEpatents

    Kuznetsov, Stephen B.

    1986-01-01

    A metal strip casing system is provided with an electromagnetic pump which includes a pair of primary blocks having a graded pole pitch, polyphase ac winding and being arranged on opposite sides of a movable heat sink. A nozzle is provided for depositing liquid metal on the heat sink such that the resulting metal strip and heat sink combination is subjected to a longitudinal electromagnetic field which increases in wavelength in the direction of travel of the heat sink, thereby subjecting the metal and heat sink to a longitudinal force having a magnitude which increases in the direction of travel.

  7. Graded pitch electromagnetic pump for thin strip metal casting systems

    DOEpatents

    Kuznetsov, S.B.

    1986-04-01

    A metal strip casing system is provided with an electromagnetic pump which includes a pair of primary blocks having a graded pole pitch, polyphase ac winding and being arranged on opposite sides of a movable heat sink. A nozzle is provided for depositing liquid metal on the heat sink such that the resulting metal strip and heat sink combination is subjected to a longitudinal electromagnetic field which increases in wavelength in the direction of travel of the heat sink, thereby subjecting the metal and heat sink to a longitudinal force having a magnitude which increases in the direction of travel. 4 figs.

  8. Characterisation of a Si(Li) orthogonal-strip detector

    NASA Astrophysics Data System (ADS)

    Harkness, L. J.; Judson, D. S.; Boston, A. J.; Boston, H. C.; Cresswell, J. R.; Nolan, P. J.; Sweeney, A.; Beau, J.; Lampert, M.; Pirard, B.; Zuvic, M.

    2013-10-01

    A Compton camera composed of an orthogonal-strip Si(Li) detector and an orthogonal-strip HPGe SmartPET detector is under investigation at the University of Liverpool. To optimise the performance of the system, it is essential to quantify the response of the detectors to gamma irradiation. Such measurements have previously been reported for the SmartPET detector and in this work we report on the experimental characterisation of the Si(Li) detector. Precision scans of the detector have been performed using a finely collimated 241Am gamma-ray source to determine the uniformity and charge collection properties of the detector.

  9. Development of a Calibration Strip for Immunochromatographic Assay Detection Systems

    PubMed Central

    Gao, Yue-Ming; Wei, Jian-Chong; Mak, Peng-Un; Vai, Mang-I.; Du, Min; Pun, Sio-Hang

    2016-01-01

    With many benefits and applications, immunochromatographic (ICG) assay detection systems have been reported on a great deal. However, the existing research mainly focuses on increasing the dynamic detection range or application fields. Calibration of the detection system, which has a great influence on the detection accuracy, has not been addressed properly. In this context, this work develops a calibration strip for ICG assay photoelectric detection systems. An image of the test strip is captured by an image acquisition device, followed by performing a fuzzy c-means (FCM) clustering algorithm and maximin-distance algorithm for image segmentation. Additionally, experiments are conducted to find the best characteristic quantity. By analyzing the linear coefficient, an average value of hue (H) at 14 min is chosen as the characteristic quantity and the empirical formula between H and optical density (OD) value is established. Therefore, H, saturation (S), and value (V) are calculated by a number of selected OD values. Then, H, S, and V values are transferred to the RGB color space and a high-resolution printer is used to print the strip images on cellulose nitrate membranes. Finally, verification of the printed calibration strips is conducted by analyzing the linear correlation between OD and the spectral reflectance, which shows a good linear correlation (R2 = 98.78%). PMID:27367694

  10. 30 CFR 77.1001 - Stripping; loose material.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 30 Mineral Resources 1 2010-07-01 2010-07-01 false Stripping; loose material. 77.1001 Section 77.1001 Mineral Resources MINE SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR COAL MINE SAFETY AND HEALTH MANDATORY SAFETY STANDARDS, SURFACE COAL MINES AND SURFACE WORK AREAS OF UNDERGROUND COAL...

  11. 30 CFR 77.1001 - Stripping; loose material.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... 30 Mineral Resources 1 2012-07-01 2012-07-01 false Stripping; loose material. 77.1001 Section 77.1001 Mineral Resources MINE SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR COAL MINE SAFETY AND HEALTH MANDATORY SAFETY STANDARDS, SURFACE COAL MINES AND SURFACE WORK AREAS OF UNDERGROUND COAL...

  12. 30 CFR 77.1001 - Stripping; loose material.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... 30 Mineral Resources 1 2014-07-01 2014-07-01 false Stripping; loose material. 77.1001 Section 77.1001 Mineral Resources MINE SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR COAL MINE SAFETY AND HEALTH MANDATORY SAFETY STANDARDS, SURFACE COAL MINES AND SURFACE WORK AREAS OF UNDERGROUND COAL...

  13. 30 CFR 77.1001 - Stripping; loose material.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 30 Mineral Resources 1 2011-07-01 2011-07-01 false Stripping; loose material. 77.1001 Section 77.1001 Mineral Resources MINE SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR COAL MINE SAFETY AND HEALTH MANDATORY SAFETY STANDARDS, SURFACE COAL MINES AND SURFACE WORK AREAS OF UNDERGROUND COAL...

  14. 30 CFR 77.1001 - Stripping; loose material.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... 30 Mineral Resources 1 2013-07-01 2013-07-01 false Stripping; loose material. 77.1001 Section 77.1001 Mineral Resources MINE SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR COAL MINE SAFETY AND HEALTH MANDATORY SAFETY STANDARDS, SURFACE COAL MINES AND SURFACE WORK AREAS OF UNDERGROUND COAL...

  15. DETAIL OF THE OHIA WOOD STRIP FLOORING OF THE WEST ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    DETAIL OF THE OHIA WOOD STRIP FLOORING OF THE WEST CORNER OF THE BASKETBALL COURT IN THE ARENA. VIEW FACING NORTH NORTHWEST - U.S. Naval Base, Pearl Harbor, Bloch Recreation Center & Arena, Between Center Drive & North Road near Nimitz Gate, Pearl City, Honolulu County, HI

  16. Graphic Arts: Process Camera, Stripping, and Platemaking. Third Edition.

    ERIC Educational Resources Information Center

    Crummett, Dan

    This document contains teacher and student materials for a course in graphic arts concentrating on camera work, stripping, and plate making in the printing process. Eight units of instruction cover the following topics: (1) the process camera and darkroom equipment; (2) line photography; (3) halftone photography; (4) other darkroom techniques; (5)…

  17. Graphic Arts: Book Two. Process Camera, Stripping, and Platemaking.

    ERIC Educational Resources Information Center

    Farajollahi, Karim; And Others

    The second of a three-volume set of instructional materials for a course in graphic arts, this manual consists of 10 instructional units dealing with the process camera, stripping, and platemaking. Covered in the individual units are the process camera and darkroom photography, line photography, half-tone photography, other darkroom techniques,…

  18. Engineering analyses of large precision cathode strip chambers for GEM

    SciTech Connect

    Horvath, J.A.; Belser, F.C.; Pratuch, S.M.; Wuest, C.R.; Mitselmakher, G.; Gordeev, A.; Johnson, C.V. |; Polychronakos, V.A.; Golutvin, I.A.

    1993-10-21

    Structural analyses of large precision cathode strip chambers performed up to the date of this publication are documented. Mechanical property data for typical chamber materials are included. This information, originally intended to be an appendix to the {open_quotes}CSC Structural Design Bible,{close_quotes} is presented as a guide for future designers of large chambers.

  19. DETAIL VIEW, SOUTHEAST ATTIC CHAMBER DOOR. (NOTE THE STRIP OF ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    DETAIL VIEW, SOUTHEAST ATTIC CHAMBER DOOR. (NOTE THE STRIP OF BEADED BOARD IMBEDDED IN THE PLASTER BEARING NAILS. THESE ARE PRESENT IN ALL OF THE ATTIC ROOMS AND WERE LIKELY USED TO HANG CLOTHING - The Woodlands, 4000 Woodlands Avenue, Philadelphia, Philadelphia County, PA

  20. Ammonia removal from landfill leachate by air stripping and absorption.

    PubMed

    Ferraz, Fernanda M; Povinelli, Jurandyr; Vieira, Eny Maria

    2013-01-01

    An old landfill leachate was pre-treated in a pilot-scale aerated packed tower operated in batch mode for total ammoniacal nitrogen (TAN) removal. The stripped ammonia was recovered with a 0.4 mol L(-1) H2SO4 solution, deionized water and tap water. Ca(OH)2 (95% purity) or commercial hydrated lime was added to the raw leachate to adjust its pH to 11, causing removal of colour (82%) and heavy metals (70-90% for Zn, Fe and Mn). The 0.4 molL(-1) H2SO4 solution was able to neutralize 80% of the stripped ammonia removed from 12 L of leachate. The effectiveness of the neutralization of ammonia with deionized water was 75%. Treating 100 L of leachate, the air stripping tower removed 88% of TAN after 72 h of aeration, and 87% of the stripped ammonia was recovered in two 31 L pilot-scale absorption units filled with 20 L of tap water.

  1. Consideration of Factors Affecting Strip Effluent PH and Sodium Content

    SciTech Connect

    Peters, T.

    2015-07-29

    A number of factors were investigated to determine possible reasons for why the Strip Effluent (SE) can sometimes have higher than expected pH values and/or sodium content, both of which have prescribed limits. All of the factors likely have some impact on the pH values and Na content.

  2. Strip-Search Case Testing Balance between Privacy, Student Safety

    ERIC Educational Resources Information Center

    Robelen, Erik W.

    2009-01-01

    As it weighs the high-profile case of a 13-year-old girl strip-searched at school, the U.S. Supreme Court is grappling with where to draw the line between protecting student privacy rights and allowing school officials to take steps to ensure a safe environment. During oral arguments, several of the justices seemed sympathetic to the challenges…

  3. 25 CFR 170.445 - What is a strip map?

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 25 Indians 1 2010-04-01 2010-04-01 false What is a strip map? 170.445 Section 170.445 Indians BUREAU OF INDIAN AFFAIRS, DEPARTMENT OF THE INTERIOR LAND AND WATER INDIAN RESERVATION ROADS PROGRAM Planning, Design, and Construction of Indian Reservation Roads Program Facilities Irr Inventory §...

  4. Upconversion fluorescent strip sensor for rapid determination of Vibrio anguillarum

    NASA Astrophysics Data System (ADS)

    Zhao, Peng; Wu, Yuanyuan; Zhu, Yihua; Yang, Xiaoling; Jiang, Xin; Xiao, Jingfan; Zhang, Yuanxing; Li, Chunzhong

    2014-03-01

    Here, we report a simple and ultrasensitive upconversion fluorescent strip sensor based on NaYF4:Yb,Er nanoparticles (NPs) and the lateral flow immunochromatographic assay (LFIA). Carboxyl-modified β-NaYF4:Yb,Er NPs were successfully synthesized by a facile one-pot solvothermal approach, upon further coupling with monoclonal antibody, the resultant UCNPs-antibody conjugates probes were used in LFIA and served as signal vehicles for the fluorescent reporters. V. anguillarum was used as a model analyte to demonstrate the use of this strip sensor. The limit of the detection for the fluorescent strip was determined as 102 CFU mL-1, which is 100 times lower than those displayed by enzyme-linked immunosorbent assays, while the time needed for the detection was only 15 min. Furthermore, no cross-reaction with other eight pathogens was found, indicating the good specificity of the strip. This developed LFIA would offer the potential as a useful tool for the quantification of pathogens analysis in the future.

  5. 6. VIEW NORTH, INTERIOR OF STORE Note ceiling stripped for ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    6. VIEW NORTH, INTERIOR OF STORE Note ceiling stripped for addition of supports, but tongue and groove wall panelling and shelving showing. To the left the stairway enclosure was added with door for front entry to the upper apartments. - 510 Central Avenue (Commercial Building), Ridgely, Caroline County, MD

  6. Restoration of decayed primary incisors using strip crowns.

    PubMed

    Pollard, M A; Curzon, J A; Fenlon, W L

    1991-05-01

    Caries of the primary incisors is a common problem that can be arrested if recognized early enough. However, the arrested decay is unsightly. Celluloid 'strip' crown forms, used with composite resin, now allow the restoration of even the most badly decayed primary incisors. The authors describe this quick and efficient technique. PMID:1884866

  7. Strip tillage for single and twin-row peanut

    Technology Transfer Automated Retrieval System (TEKTRAN)

    Soil degradation and rising production costs have prompted grower interest in conservation tillage with high residue cover crops for peanut (Arachis hypogaea L.). The objective was to evaluate single and twin-row peanut production across three different strip tillage implements with and without a c...

  8. Ammonia removal from landfill leachate by air stripping and absorption.

    PubMed

    Ferraz, Fernanda M; Povinelli, Jurandyr; Vieira, Eny Maria

    2013-01-01

    An old landfill leachate was pre-treated in a pilot-scale aerated packed tower operated in batch mode for total ammoniacal nitrogen (TAN) removal. The stripped ammonia was recovered with a 0.4 mol L(-1) H2SO4 solution, deionized water and tap water. Ca(OH)2 (95% purity) or commercial hydrated lime was added to the raw leachate to adjust its pH to 11, causing removal of colour (82%) and heavy metals (70-90% for Zn, Fe and Mn). The 0.4 molL(-1) H2SO4 solution was able to neutralize 80% of the stripped ammonia removed from 12 L of leachate. The effectiveness of the neutralization of ammonia with deionized water was 75%. Treating 100 L of leachate, the air stripping tower removed 88% of TAN after 72 h of aeration, and 87% of the stripped ammonia was recovered in two 31 L pilot-scale absorption units filled with 20 L of tap water. PMID:24350487

  9. STRIP BEING REDUCED IN CROSSSECTION AND ELONGATED ON RUNOUT LINE ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    STRIP BEING REDUCED IN CROSS-SECTION AND ELONGATED ON RUN-OUT LINE OF #43 HOT MILL. MECHANICAL TRANSFER HAS MOVED INTO POSITION OVER FURNACE DISCHARGE LINE (L) TO RETRIEVE ANOTHER CAKE. - American Brass Foundry, 70 Sayre Street, Buffalo, Erie County, NY

  10. 12 CFR 204.132 - Treatment of loan strip participations.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... selling the loan or participation in effect must buy back the loan or participation at the maturity of the... 12 Banks and Banking 2 2010-01-01 2010-01-01 false Treatment of loan strip participations. 204.132... RESERVE REQUIREMENTS OF DEPOSITORY INSTITUTIONS (REGULATION D) Interpretations § 204.132 Treatment of...

  11. Woven graphite epoxy composite test specimens with glass buffer strips

    NASA Technical Reports Server (NTRS)

    Bonnar, G. R.; Palmer, R. J.

    1982-01-01

    Woven unidirectional graphite cloth with bands of fiberglass replacing the graphite in discrete lengthwise locations was impregnated with epoxy resin and used to fabricate a series of composite tensile and shear specimens. The finished panels, with the fiberglass buffer strips, were tested. Details of the fabrication process are reported.

  12. Evaluation of an automated urine chemistry reagent-strip analyzer.

    PubMed

    Lott, J A; Johnson, W R; Luke, K E

    1995-01-01

    We evaluated the Miles Inc., Clinitek Atlas Automated Urine Chemistry Analyzer for 11 tests: bilirubin, color, glucose, ketones, leukocyte esterase, nitrite, occult blood, pH, protein, specific gravity, and urobilinogen. The instrument uses a roll of reagent strips affixed to a clear plastic support; urine specimens are automatically pipetted onto these strips. The instrument measures the pads' color using reflectance colorimetry. Specific gravity is measured using a fiberoptic refractive index method. Four hospitals participated in the evaluation, and tests were performed only on fresh urine samples. We found the instrument easy to use; it has walk-away capability with up to 40-specimen loading capacity plus spaces for STATs, calibrators and controls. We found good comparability with chemical tests and other nonreagent strip procedures, as well as good agreement with the Miles Inc. Clinitek 200+ urine chemistry analyzer and visual reading of the Miles Inc. Multistix Reagent Strips. The Clinitek Atlas is rugged and reliable, and is suitable for a high-volume urinalysis laboratory.

  13. Cropland filter strip removal of cattle manure constituents in runoff

    Technology Transfer Automated Retrieval System (TEKTRAN)

    There is little scientifically-derived information available to help identify setback distances required to effectively reduce contaminants from incoming runoff on cropland areas. The objective of this study was to determine the effects of cropland filter strip (CFS) length and runoff rate on concen...

  14. Propellers And Fans Based On The Moebius Strip

    NASA Technical Reports Server (NTRS)

    Seiner, John Milton; Gilinsky, Mikhail Markovich

    1996-01-01

    Moebius strip proposed as basis for optimally shaped airplane and boat propellers, fans, helicopter rotors, mixing screws, coffee grinders, and concrete mixers. Basic idea of optimal shaping of such device to increase working efficiency by increasing area for capture of still medium without increasing power needed for rotation.

  15. LOADING REEL AND PERFECTO STRIP STOCK FEEDER FOR #84 WATERBURYFARREL ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    LOADING REEL AND PERFECTO STRIP STOCK FEEDER FOR #84 WATERBURY-FARREL (U.S. GOVERNMENT) PRESS. THIS CONTINUOUS-FEED, 2-DRAW, 100 TON PRESS IS ONE OF TWO IN THE U.S. UNDER CONTRACT WITH THE DEPARTMENT OF DEFENSE FOR PRODUCTION OF BULLET JACKETS AND CARTRIDGE CASINGS. - American Brass Foundry, 70 Sayre Street, Buffalo, Erie County, NY

  16. Delta XTE Spacecraft Arrives at CCAS Skid Strip

    NASA Technical Reports Server (NTRS)

    1995-01-01

    Footage shows the U.S Air Force Aircraft "Air Mobility Command" approaching, and landing at the Cape Canaveral Air Station Skid Strip (CCAS). The truck carrying the Delta XTE Spacecraft is also shown as it leaves the Air Mobility Command.

  17. View from second level looking down on embedded weld strips ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    View from second level looking down on embedded weld strips and plugged, threaded anchors in the foundation slab. These were put in place to assist in adapting to future configurations of the test stand. - Marshall Space Flight Center, Saturn V Dynamic Test Facility, East Test Area, Huntsville, Madison County, AL

  18. Development of a Calibration Strip for Immunochromatographic Assay Detection Systems.

    PubMed

    Gao, Yue-Ming; Wei, Jian-Chong; Mak, Peng-Un; Vai, Mang-I; Du, Min; Pun, Sio-Hang

    2016-01-01

    With many benefits and applications, immunochromatographic (ICG) assay detection systems have been reported on a great deal. However, the existing research mainly focuses on increasing the dynamic detection range or application fields. Calibration of the detection system, which has a great influence on the detection accuracy, has not been addressed properly. In this context, this work develops a calibration strip for ICG assay photoelectric detection systems. An image of the test strip is captured by an image acquisition device, followed by performing a fuzzy c-means (FCM) clustering algorithm and maximin-distance algorithm for image segmentation. Additionally, experiments are conducted to find the best characteristic quantity. By analyzing the linear coefficient, an average value of hue (H) at 14 min is chosen as the characteristic quantity and the empirical formula between H and optical density (OD) value is established. Therefore, H, saturation (S), and value (V) are calculated by a number of selected OD values. Then, H, S, and V values are transferred to the RGB color space and a high-resolution printer is used to print the strip images on cellulose nitrate membranes. Finally, verification of the printed calibration strips is conducted by analyzing the linear correlation between OD and the spectral reflectance, which shows a good linear correlation (R² = 98.78%). PMID:27367694

  19. A visual strip sensor for determination of iron.

    PubMed

    Kumar, Sanjukta A; Thakur, Neha; Parab, Harshala J; Pandey, Shailaja P; Shinde, Rakesh N; Pandey, Ashok K; Kumar, Sangita D; Reddy, A V R

    2014-12-01

    A visual strip has been developed for sensing iron in different aqueous samples like natural water and fruit juices. The sensor has been synthesized by UV-radiation induced graft polymerization of acrylamide monomer in microporous poly(propylene) base. For physical immobilization of iron selective reagent, the in situ polymerization of acrylamide has been carried out in the presence of 1,10-phenanthroline. The loaded strip on interaction with Fe(II) in aqueous solution turned into orange red color and the intensity of the color was found to be directly proportional to the amount of Fe(II) in the aqueous sample. The minimal sensor response with naked eye was found for 50ngmL(-1) of Fe in 15min of interaction. However, as low as 20ngmL(-1) Fe could be quantified using a spectrophotometer. The detection limit calculated using the 3s/S criteria, where 's' is the standard deviation of the absorbance of blank reagent loaded strip and 'S' is the slope of the linear calibration plot, was 1.0ngmL(-1). The strip was applied to measure Fe in a variety of samples such as ground water and fruit juices. PMID:25440669

  20. Triple-stack multigap resistive plate chamber with strip readout

    NASA Astrophysics Data System (ADS)

    Babkin, V.; Basilev, S.; Buryakov, M.; Golovatyuk, V.; Lobastov, S.; Petrov, V.; Rumyantsev, M.; Schipunov, A.; Shutov, A.; Slepnev, I.; Slepnev, V.

    2016-07-01

    A triple-stack MRPC for the TOF system of the BM@N and the MPD experiments at the future collider NICA was tested. We use three stacks of glass to have symmetrical construction which allows to decrease dispersion and reflections of the signal from the readout strip.

  1. Results of Laboratory Testing of Advanced Power Strips

    SciTech Connect

    Earle, L.; Sparn, B.

    2012-08-01

    Presented at the ACEEE Summer Study on Energy Efficiency in Buildings on August 12-17, 2012, this presentation reports on laboratory tests of 20 currently available advanced power strip products, which reduce wasteful electricity use of miscellaneous electric loads in buildings.

  2. ORIC stripping foil positioner for tandem beam injection

    SciTech Connect

    Ludemann, C.A.; Lord, R.S.; Hudson, E.D.; Irwin, F.; Beckers, R.M.; Haynes, D.L.; Casstevens, B.J.; Mosko, S.W.

    1981-01-01

    The Oak Ridge Isochronous Cyclotron (ORIC) is used as an energy booster for heavy ions from a 25 MV tandem accelerator. This operation requires precise placement of a stripping foil in the cyclotron for capture of the injected ions into an acceleration orbit. The mechanical design and control of the foil positioning device are described.

  3. Errors arising from incorrect orientation of E test strips.

    PubMed Central

    Hamilton-Miller, J M; Shah, S; Yam, T S

    1995-01-01

    Major errors arise if E test strips are placed upside down. Asymmetric zones, or no zone at all, may result. MICs indicated by upside-down tests were almost always considerably higher than true values. This situation differs markedly from that for conventional testing, where orientation of disks is not important. PMID:7665686

  4. Effect of roller shapes on strip buckling in a continuous annealing furnace

    NASA Astrophysics Data System (ADS)

    Yang, Jing; Tang, Di; Su, Lan; Jiang, Hai-Tao; Yang, Quan

    2011-06-01

    The effect of roller shapes on strip buckling in a continuous annealing furnace was focused on. The tensile stress distribution, the transverse compressive stress, and the critical buckling stress of the strip were studied by the finite element method (FEM) when the flat roller, crown roller, single taper roller, and double taper roller were used, respectively. Simulation results show that strip buckling is most likely to occur with the crown roller, then the double taper roller, and finally the single taper roller. Also, strip buckling can not occur when the flat roller is used. Considering strip snaking, the single taper roller and double taper roller are suggested in the continuous annealing furnace. The double taper roller with a better strip snaking-prevention ability should be applied in the sections with high strip temperature, and the single taper roller with a better buckling-prevention ability should be used in the sections with low strip temperature.

  5. An assessment of buffer strips for improving damage tolerance of composite laminates at elevated temperature

    NASA Technical Reports Server (NTRS)

    Bigelow, C. A.

    1981-01-01

    Buffer strips greatly improve the damage tolerance of graphite/epoxy laminates loaded in tension. Graphite/polyimide buffer strip panels were made and tested to determine their residual strength at ambient and elevated (177 C) temperature. Each panel was cut in the center to represent damage. Panels were radiographed and crack-opening displacements were recorded to indicate fracture, fracture arrest, and the extent of damage in the buffer strip after arrest. All panels had the same buffer strip spacing and width. The buffer strip material was 0 deg S-glass/PMR-15. The buffer strips were made by replacing narrow strips of the 0 deg graphite plies with strips of the 0 deg S-glass on either a one-for-one or a two-for-one basis. Half of the panels were heated to 177 + or - 3 C before and during the testing. Elevated temperature did not alter the fracture behavior of the buffer configuration.

  6. 78 FR 2369 - Polyethylene Terephthalate Film, Sheet and Strip From India: Partial Rescission of Countervailing...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-01-11

    ... International Trade Administration Polyethylene Terephthalate Film, Sheet and Strip From India: Partial... (CVD) order on polyethylene terephthalate film, sheet and strip from India covering the period January... Polyester Ltd. (Garware), Polyplex Corporation Ltd. (Polyplex), SRF Limited (SRF), and Jindal Poly...

  7. PROGENITOR DIAGNOSTICS FOR STRIPPED CORE-COLLAPSE SUPERNOVAE: MEASURED METALLICITIES AT EXPLOSION SITES

    SciTech Connect

    Modjaz, M.; Bloom, J. S.; Filippenko, A. V.; Perley, D.; Silverman, J. M.; Kewley, L.

    2011-04-10

    Metallicity is expected to influence not only the lives of massive stars but also the outcome of their deaths as supernovae (SNe) and gamma-ray bursts (GRBs). However, there are surprisingly few direct measurements of the local metallicities of different flavors of core-collapse SNe (CCSNe). Here, we present the largest existing set of host-galaxy spectra with H II region emission lines at the sites of 35 stripped-envelope CCSNe. We derive local oxygen abundances in a robust manner in order to constrain the SN Ib/c progenitor population. We obtain spectra at the SN sites, include SNe from targeted and untargeted surveys, and perform the abundance determinations using three different oxygen-abundance calibrations. The sites of SNe Ic (the demise of the most heavily stripped stars, having lost both H and He layers) are systematically more metal rich than those of SNe Ib (arising from stars that retained their He layer) in all calibrations. A Kolmogorov-Smirnov test yields the very low probability of 1% that SN Ib and SN Ic environment abundances, which are different on average by {approx}0.2 dex (in the Pettini and Pagel scale), are drawn from the same parent population. Broad-lined SNe Ic (without GRBs) occur at metallicities between those of SNe Ib and SNe Ic. Lastly, we find that the host-galaxy central oxygen abundance is not a good indicator of the local SN metallicity; hence, large-scale SN surveys need to obtain local abundance measurements in order to quantify the impact of metallicity on stellar death.

  8. Air stripping. (Latest citations from the NTIS bibliographic database). Published Search

    SciTech Connect

    1995-02-01

    The bibliography contains citations concerning the application of air stripping techniques to water treatment, including groundwater decontamination and wastewater purification. The advantages and disadvantages of air stripping over other water treatment processes are discussed. Cleanup of the organic emissions generated by air stripping is also considered. The primary applications of air stripping are in groundwater and soil cleanup. (Contains a minimum of 89 citations and includes a subject term index and title list.)

  9. Air stripping. (Latest citations from the NTIS bibliographic database). Published Search

    SciTech Connect

    Not Available

    1994-02-01

    The bibliography contains citations concerning the application of air stripping techniques to water treatment, including groundwater decontamination and wastewater purification. The advantages and disadvantages of air stripping over other water treatment processes are discussed. Cleanup of the organic emissions generated by air stripping is also considered. The primary applications of air stripping are in groundwater and soil cleanup. (Contains a minimum of 83 citations and includes a subject term index and title list.)

  10. Air stripping. (Latest citations from the NTIS bibliographic database). Published Search

    SciTech Connect

    1995-12-01

    The bibliography contains citations concerning the application of air stripping techniques to water treatment, including groundwater decontamination and wastewater purification. The advantages and disadvantages of air stripping over other water treatment processes are discussed. Cleanup of the organic emissions generated by air stripping is also considered. The primary applications of air stripping are in groundwater and soil cleanup. (Contains 50-250 citations and includes a subject term index and title list.) (Copyright NERAC, Inc. 1995)

  11. Air stripping. (Latest citations from the NTIS bibliographic database). Published Search

    SciTech Connect

    1997-03-01

    The bibliography contains citations concerning the application of air stripping techniques to water treatment, including groundwater decontamination and wastewater purification. The advantages and disadvantages of air stripping over other water treatment processes are discussed. Cleanup of the organic emissions generated by air stripping is also considered. The primary applications of air stripping are in groundwater and soil cleanup. (Contains 50-250 citations and includes a subject term index and title list.) (Copyright NERAC, Inc. 1995)

  12. The Examination of Fatty Acid Taste with Edible Strips

    PubMed Central

    Ebba, Sahbina; Abarintos, Ray A.; Kim, Dae G.; Tiyouh, Melissa; Stull, Judith C.; Movalia, Ankur; Smutzer, Gregory

    2012-01-01

    The objective of this study was to determine whether humans could detect long-chain fatty acids when these lipid molecules are delivered to the oral cavity by edible taste strips. For suprathreshold studies, up to 1.7 umoles of stearic acid or linoleic acid were incorporated into 0.03 mm thick, one-inch square taste strips. Normalized taste intensity values for stearic acid were in the barely detectable range, with values equal to, or slightly above control strips. One-third of test subjects described the taste quality as oily/fatty/waxy. Approximately 75% of test subjects could detect the presence of linoleic acid when this fatty acid was incorporated into dissolvable strips. Normalized taste intensity values for linoleic acid were in the weak to moderate range. The most commonly reported taste quality responses for linoleic acid were fatty/oily/waxy, or bitter. When nasal airflow was obstructed, the perceived taste intensity of linoleic acid decreased by approximately 40 percent. Taste intensity values and taste quality responses for linoleic acid were then compared among tasters and non-tasters of 6-n-propylthiouracil (PROP). Individuals who could detect the bitter taste of PROP reported higher taste intensity values for linoleic acid compared with PROP non-tasters. However, taste quality responses for linoleic acid were similar among both PROP tasters and PROP non-tasters. These results indicate that humans can detect long-chain fatty acids by both olfactory and non-olfactory pathways when these hydrophobic molecules are delivered to the oral cavity by means of edible taste strips. These studies further show that genetic variation in taste sensitivity to PROP affects chemosensory responses to the cis-unsaturated fatty acid linoleic acid in the oral cavity. PMID:22521910

  13. Flexible Faraday Cage with a Twist: Surface Charge on a Mobius Strip

    ERIC Educational Resources Information Center

    Stewart, Sean

    2007-01-01

    Once an intriguing topological novelty known only to mathematicians, the Mobius strip has become a source of fascination and inspiration to the layperson and artist alike. Principal among its features are the two strange properties that the Mobius strip is a surface with only one side and one edge. A Mobius strip is readily formed by taking a long…

  14. "Color" In the Comic Strips: Racial Stereotyping Trends in Black and in White Newspapers.

    ERIC Educational Resources Information Center

    Stevens, John D.

    Any comic strip artist deals in stereotypes. The history of two black comic strips begun in the 1920s, "Bungleton Green" and "Sunny Boy Sam," both of which featured anti-heroes in the "fall guy" tradition, may be traced to show the way in which they portrayed black stereotypes. Black strips engaged in a degree of stereotyping of white characters…

  15. 26 CFR 1.1286-2 - Stripped inflation-indexed debt instruments.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... 26 Internal Revenue 11 2011-04-01 2011-04-01 false Stripped inflation-indexed debt instruments. 1.1286-2 Section 1.1286-2 Internal Revenue INTERNAL REVENUE SERVICE, DEPARTMENT OF THE TREASURY... Losses § 1.1286-2 Stripped inflation-indexed debt instruments. Stripped inflation-indexed...

  16. 26 CFR 1.1286-2 - Stripped inflation-indexed debt instruments.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 26 Internal Revenue 11 2010-04-01 2010-04-01 true Stripped inflation-indexed debt instruments. 1.1286-2 Section 1.1286-2 Internal Revenue INTERNAL REVENUE SERVICE, DEPARTMENT OF THE TREASURY....1286-2 Stripped inflation-indexed debt instruments. Stripped inflation-indexed debt instruments. If...

  17. 78 FR 77649 - Polyethylene Terephthalate Film, Sheet, and Strip From the United Arab Emirates; Preliminary...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-12-24

    ...\\ See Polyethylene Terephthalate Film, Sheet, and Strip from Brazil, the People's Republic of China and... International Trade Administration Polyethylene Terephthalate Film, Sheet, and Strip From the United Arab... antidumping duty order on polyethylene terephthalate film, sheet, and strip (PET Film) from the United...

  18. 75 FR 49902 - Polyethylene Terephthalate Film, Sheet, and Strip From Taiwan: Preliminary Results of Antidumping...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-08-16

    ...: Polyethylene Terephthalate Film, Sheet, and Strip (PET Film) from Taiwan, 67 FR 46566 (July 1, 2002). On July 1... International Trade Administration Polyethylene Terephthalate Film, Sheet, and Strip From Taiwan: Preliminary... ] administrative review of the antidumping duty order on polyethylene terephthalate film, sheet, and strip...

  19. 76 FR 18519 - Polyethylene Terephthalate Film, Sheet, and Strip From Taiwan: Amended Final Results of...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-04-04

    ... Terephthalate Film, Sheet, and Strip From Taiwan: Final Results of Antidumping Duty Administrative Review, 76 FR... International Trade Administration Polyethylene Terephthalate Film, Sheet, and Strip From Taiwan: Amended Final... terephthalate film, sheet, and strip (PET Film) from Taiwan.\\1\\ The period of review (POR) is July 1,...

  20. 75 FR 40784 - Polyethylene Terephthalate Film, Sheet, and Strip from the Republic of Korea: Preliminary Results...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-07-14

    ...: Polyethylene Terephthalate Film, Sheet, and Strip from Thailand, 73 FR 24565, 24567 (May 5, 2008) (unchanged in... International Trade Administration Polyethylene Terephthalate Film, Sheet, and Strip from the Republic of Korea... administrative review of the antidumping duty order on polyethylene terephthalate film, sheet and strip (PET...

  1. 76 FR 76941 - Polyethylene Terephthalate Film, Sheet, and Strip From Taiwan: Final Results of Antidumping Duty...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-12-09

    ... Terephthalate Film, Sheet, and Strip (PET Film) from Taiwan, 67 FR 44174 (July 1, 2002) (Investigation Final... International Trade Administration Polyethylene Terephthalate Film, Sheet, and Strip From Taiwan: Final Results... administrative review of the antidumping duty order on polyethylene terephthalate film, sheet and strip (PET...

  2. 75 FR 10758 - Polyethylene Terephthalate Film, Sheet and Strip from India: Initiation of Antidumping Duty and...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-03-09

    ... Order: Polyethylene Terephthalate Film, Sheet and Strip (PET Film) from India, 67 FR 44179 (July 1, 2002... International Trade Administration Polyethylene Terephthalate Film, Sheet and Strip from India: Initiation of...) orders on Polyethylene Terephthalate Film, Sheet and Strip (PET Film) from India. The...

  3. 75 FR 65450 - Polyethylene Terephthalate Film, Sheet and Strip From India: Extension of Time Limit for...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-10-25

    ... International Trade Administration Polyethylene Terephthalate Film, Sheet and Strip From India: Extension of... the antidumping duty order on polyethylene terephthalate film, sheet and strip from India for the period July 1, 2009 through December 31, 2009. See Polyethylene Terephthalate Film, Sheet and Strip...

  4. 75 FR 6634 - Polyethylene Terephthalate Film, Sheet, and Strip from India: Final Results of Countervailing...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-02-10

    ... International Trade Administration Polyethylene Terephthalate Film, Sheet, and Strip from India: Final Results... terephthalate film, sheet, and strip (PET film) from India for the period January 1, 2007 through December 31, 2007. See Polyethylene Terephthalate Film, Sheet, and Strip from India: Preliminary Results...

  5. 78 FR 48147 - Polyethylene Terephthalate Film, Sheet, and Strip From India: Preliminary Results of...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-08-07

    ... International Trade Administration Polyethylene Terephthalate Film, Sheet, and Strip From India: Preliminary... film, sheet and strip (PET film) from India for the period of review (POR) January 1, 2011, through... polyethylene terephthalate film, sheet and strip, whether extruded or coextruded. Excluded are metallized...

  6. 76 FR 71512 - Polyethylene Terephthalate Film, Sheet, and Strip From Korea: Final Results of Antidumping Duty...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-11-18

    ... International Trade Administration Polyethylene Terephthalate Film, Sheet, and Strip From Korea: Final Results... of the antidumping duty order on polyethylene terephthalate film, sheet, and strip (PET film) from... Terephthalate Film, Sheet, and Strip from the Republic of Korea: Preliminary Results of Antidumping...

  7. 76 FR 47558 - Polyethylene Terephthalate Film, Sheet, and Strip From India: Preliminary Results of...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-08-05

    ... Terephthalate Film, Sheet, and Strip (PET Film) from India, 67 FR 44179 (July 1, 2002). On July 1, 2010, the... Terephthalate Film, Sheet, and Strip (PET Film) From India, 67 FR 34905 (May 16, 2002) (PET Film Final... Countervailing Duty Administrative Review: Polyethylene Terephthalate Film, Sheet, and Strip from India, 70...

  8. 76 FR 47540 - Polyethylene Terephthalate Film, Sheet, and Strip From Taiwan: Preliminary Results of Antidumping...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-08-05

    ..., Sheet, and Strip (PET Film) From Taiwan, 67 FR 44174 (July 1, 2002), as corrected in 67 FR 46566 (July... Taiwan, 66 FR 31888 (June 13, 2001). \\30\\ See Polyethylene Terephthalate Film, Sheet, and Strip From... International Trade Administration Polyethylene Terephthalate Film, Sheet, and Strip From Taiwan:...

  9. 76 FR 47546 - Polyethylene Terephthalate Film, Sheet, and Strip From India: Preliminary Results of Antidumping...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-08-05

    ... Strip from India, 67 FR 44175 (July 1, 2002) (PET Film India Order). On July 1, 2010, the Department... Duty Determination: Polyethylene Terephthalate Film, Sheet, and Strip (PET Film) From India, 67 FR... Determination: Polyethylene Terephthalate Film, Sheet, and Strip From India, 66 FR 65893 (December 21, 2001),...

  10. 78 FR 79400 - Polyethylene Terephthalate Film, Sheet, and Strip From the People's Republic of China: Initiation...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-12-30

    ..., sheet, and strip (``PET film'') from the People's Republic of China (``PRC'') meets the statutory and... Terephthalate Film, Sheet, and Strip from the People's Republic of China; A-570-924; Request for New Shipper... International Trade Administration Polyethylene Terephthalate Film, Sheet, and Strip From the People's...

  11. 31 CFR 356.31 - How does the STRIPS program work?

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ...-principal securities (notes and bonds other than Treasury inflation-protected securities—(1) Minimum par... inflation-protected securities—(1) Minimum par amounts required for STRIPS. The minimum par amount of an inflation-protected security that may be stripped is $100. Any par amount to be stripped above $100 must...

  12. Effect of drugs, hormones and electrical field stimulation on isolated muscle strips from human choledochoduodenal junction.

    PubMed

    McKirdy, H C; Marshall, R W; Griffin, P

    1987-04-01

    The behaviour of in vitro strips from the human choledochoduodenal junction would appear to be related to the anatomical location of origin of the strip. Strips from the papillary region showed low tone and obvious spontaneous rhythmic contractions (0 X 5-6/min). Strips from the region of the inferior choledochal sphincter showed, in ten out of fifteen specimens, spontaneous myogenic tone and gave a relaxation or a biphasic response (relaxation followed by contraction) to electrical field stimulation (0 X 3 ms pulses at 10 Hz for 5 s). All strips from human choledochoduodenal junction are remarkably insensitive to a variety of gastrointestinal hormones and to opioid agents.

  13. Enhanced absorption of graphene strips with a multilayer subwavelength grating structure

    SciTech Connect

    Hu, Jin-Hua; Huang, Yong-Qing Duan, Xiao-Feng; Wang, Qi; Zhang, Xia; Wang, Jun; Ren, Xiao-Min

    2014-12-01

    The optical absorption of graphene strips covered on a multilayer subwavelength grating (MSG) surface is theoretically investigated. The absorption of graphene strips with MSG is enhanced in the wavelength range of 1500 nm to 1600 nm by critical coupling, which is associated with the combined effects of a guided resonance of MSG and its photonic band gap effect. The critical coupling of the graphene strips can be controlled by adjusting the incident angle without changing the structural parameters of MSG. The absorption of graphene strips can also be tuned by varying key parameters, such as grating period, strip width, and incident angle.

  14. Scattering from perfectly conducting and resistive strips on a grounded dielectric slab

    NASA Technical Reports Server (NTRS)

    Shively, David

    1994-01-01

    The scattering properties of perfectly conducting and resistive strips are predicted for strips which are located on a dielectric slab backed by a perfectly conducting ground plane. The spectral domain Green's function is used to relate the currents and fields on the strip, and the resulting integral equation is solved using the method of moments. Both TE and TM strips are examined using piecewise linear and pulse subdomain basis functions, respectively, to model the current on the strip. Calculated results are compared with results measured at the NASA Langley Research Center.

  15. Influence of the gas composition on the efficiency of ammonia stripping of biogas digestate.

    PubMed

    Bousek, J; Scroccaro, D; Sima, Jan; Weissenbacher, Norbert; Fuchs, W

    2016-03-01

    Impact of strip gas composition on side stream ammonia stripping, a technology aiming at the reduction of high ammonia levels in anaerobic reactors, was investigated. Evaluation of the effect of oxygen contact during air stripping showed a distinct, though lower than perceived, inhibition of anaerobic microflora. To circumvent, the feasibility and possible constraints of biogas and flue gas as alternatives in side stream stripping were studied. Experiments, with ammonia bicarbonate model solution and digestate, were conducted. It was demonstrated that the stripping performance is negatively correlated to the CO2 level in the strip gas with a progressive performance loss towards higher concentrations. In contrast to biogas with its high CO2 content, the efficiency reduction observed for flue gas was significantly less pronounced. The later provides the additional benefit that its high thermal energy can be re-utilized in the stripping unit and it is therefore considered a viable alternative for air.

  16. Process for recovering uranium using an alkyl pyrophosphoric acid and alkaline stripping solution

    SciTech Connect

    Worthington, R.E.; Magdics, A.

    1987-03-24

    A process is described for stripping uranium for a pregnant organic extractant comprising an alkyl pyrophosphoric acid dissolved in a substantially water-immiscible organic diluent. The organic extractant contains tetravalent uranium and an alcohol or phenol modifier in a quantity sufficient to retain substantially all the unhydrolyzed alkyl pyrophosphoric acid in solution in the diluent during stripping. The process comprises adding an oxidizing agent to the organic extractant and thereby oxidizing the tetravalent uranium to the +6 state in the organic extractant, and contacting the organic extractant containing the uranium in the +6 state with a stripping solution comprising an aqueous solution of an alkali metal or ammonium carbonate or hydroxide thereby stripping uranium from the organic extractant into the stripping solution. The resulting barren organic extractant containing substantially all of the unhydrolyzed alkyl pyrophosphoric acid dissolved in the diluent is separated from the stripping solution containing the stripped uranium, the barren extractant being suitable for recycle.

  17. Process for recovering uranium using an alkyl pyrophosphoric acid and alkaline stripping solution

    SciTech Connect

    Worthington, R.E.; Magdics, A.

    1987-03-24

    A process is described for stripping uranium from a pregnant organic extractant comprising an alkyl pyrophosphoric acid dissolved in a substantially water-immiscible organic diluent. The organic extractant contains tetravalent uranium and an alcohol or phenol modifier in a quantity sufficient to retain substantially all the unhydrolyzed alkyl pyrophosphoric acid in solution in the diluent during stripping. The process comprises adding an oxidizing agent to the organic extractant to and thereby oxidizing the tetravalent uranium to the +6 state in the organic extractant, and contacting the organic extractant containing the uranium in the +6 state with a stripping solution comprising an aqueous solution of an alkali metal or ammonium carbonate, nonsaturated in uranium. The uranium is stripped from, the organic extractant into the stripping solution, and the resulting barren organic extractant containing substantially all of the unhydrolyzed alkyl pyrophosphoric acid dissolved in the diluent is separated from the stripping solution containing the stripped uranium, the barren extractant being suitable for recycle.

  18. The fist homogeneous, multi-color photometric and spectroscopic sample of Stripped Envelope Super Novae and what it can tell us about their progenitors

    NASA Astrophysics Data System (ADS)

    Bianco, Federica; Modjaz, Maryam; Liu, Yuqian; CfA supernova Group

    2015-01-01

    Stripped envelope supernovae (stripped SN) arise from the spectacular death of massive stars which have lost their outer layers of Hydrogen and Helium in the late stages of their lives. They hold clues to study the final stages of the life of massive stars and the chemical enrichment of the Universe, and are intrinsically as common as SN type Ia. However, they have been observed and studied far less than SN Ia. The scarcity of data has thus far impaired the detailed study of their characteristics and a clear picture of the progenitor channels still eludes us.The CfA produced the first large stripped SN survey that includes multi-color photometry in the optical and NIR (Bianco et al. 2014) as well as spectroscopy (Modjaz et al. 2014) of over 50 stripped SN. This dataset allows us to accurately derive bolometric lightcurves, and measure ejecta velocities in a consistent fashion for the entire sample. We can set constraints on the ejecta masses of SN IIb, Ib, Ic and Ic-BL, and probe the diversity in the explosions and in the progenitor channels. The study of our sample allows a direct comparison of the ejecta characteristics with the outcome of recent stellar evolution studies, confirming that binary evolution plays an important role in the late stages of the life of high mass stars.

  19. Vacuum stripping of ethanol during high solids fermentation of corn.

    PubMed

    Shihadeh, Jameel K; Huang, Haibo; Rausch, Kent D; Tumbleson, Mike E; Singh, Vijay

    2014-05-01

    In corn-ethanol industry, yeast stress inducing glucose concentrations produced during liquefaction and subsequent high ethanol concentrations produced during fermentation restrict slurry solids to 32 % w/w. These limits were circumvented by combining two novel technologies: (1) granular starch hydrolyzing enzyme (GSHE) to break down starch simultaneously with fermentation and (2) vacuum stripping to remove ethanol. A vacuum stripping system was constructed and applied to fermentations at 30, 40, and 45 % solids. As solids increased from 30 to 40 %, ethanol yield decreased from 0.35 to 0.29 L/kg. Ethanol yield from 45 % solids was only 0.18 L/kg. An improvement was conducted by increasing enzyme dose from 0.25 to 0.75 g/g corn and reducing yeast inoculum by half. After improvement, ethanol yield from 40 % solids vacuum treatment increased to 0.36 L/kg, comparable to ethanol yield from 30 % solids (control).

  20. Air stripping & photocatalytic oxidation: A winning team for groundwater remediation

    SciTech Connect

    Kittrell, J.R.; Quinlan, C.W.

    1995-09-01

    The Dover AFB Groundwater Reclamation Project demonstrated advanced technologies to control groundwater contamination, including comparisons of traditional countercurrent air atrippers to a crossflow air stripping technology. Another demonstration involved an advanced photocatalytic VOC destruction technology, which operates on the effluent air from the stripper. The combination of air stripping and photocatalytic destruction was shown to be effective for remediation of groundwater contaminated with chlorinated organic compounds, both because of its low cost and its ability to prevent toxic air emissions. A detailed performance comparison of stripper designs shows that the crossflow air stripper design was comparable in effectiveness to the conventional countercurrent air stripper at high air-to-water ratios, but at a substantially lower pressure drop.

  1. Architecture of a silicon strip beam position monitor

    NASA Astrophysics Data System (ADS)

    Angstadt, R.; Cooper, W.; Demarteau, M.; Green, J.; Jakubowski, S.; Prosser, A.; Rivera, R.; Turqueti, M.; Utes, M.; Cai, X.

    2010-12-01

    A collaboration between Fermilab and the Institute for High Energy Physics (IHEP), Beijing, has developed a beam position monitor for the IHEP test beam facility. This telescope is based on 5 stations of silicon strip detectors having a pitch of 60 microns. The total active area of each layer of the detector is about 12x10 cm2. Readout of the strips is provided through the use of VA1` ASICs mounted on custom hybrid printed circuit boards and interfaced to Adapter Cards via copper-over-kapton flexible circuits. The Adapter Cards amplify and level-shift the signal for input to the Fermilab CAPTAN data acquisition nodes for data readout and channel configuration. These nodes deliver readout of triggered events and temperature data to an analysis computer over gigabit Ethernet links.

  2. Ignition, Burning, and Extinction of a Strained Fuel Strip

    NASA Technical Reports Server (NTRS)

    Selerland, T.; Karagozian, A. R.

    1996-01-01

    Flame structure and ignition and extinction processes associated with a strained fuel strip are explored numerically using detailed transport and complex kinetics for a propane-air reaction. Ignition modes are identified that are similar to those predicted by one-step activation energy asymptotics, i.e., modes in which diffusion flames can ignite as independent or dependent interfaces, and modes in which single premixed or partially premixed flames ignite. These ignition modes are found to be dependent on critical combinations of strain rate, fuel strip thickness, and initial reactant temperatures. Extinction in this configuration is seen to occur due to fuel consumption by adjacent flames, although viscosity is seen to have the effect of delaying extinction by reducing the effective strain rate and velocity field experienced by the flames.

  3. Method and apparatus for planar drag strip casting

    DOEpatents

    Powell, J.C.; Campbell, S.L.

    1991-11-12

    The present invention is directed to an improved process and apparatus for strip casting. The combination of a planar flow casting nozzle positioned back from the top dead center position with an attached nozzle extension, provides an increased level of casting control and quality. The nozzle extension provides a means of containing the molten pool above the rotating substrate to increase the control of molten metal at the edges of the strip and increase the range of coating thicknesses which may be produced. The level of molten metal in the containment means is regulated to be above the level of melt supplying the casting nozzle which produces a condition of planar drag flow with the casting substrate prior to solidification. 5 figures.

  4. Method and apparatus for planar drag strip casting

    DOEpatents

    Powell, John C.; Campbell, Steven L.

    1991-01-01

    The present invention is directed to an improved process and apparatus for strip casting. The combination of a planar flow casting nozzle positioned back from the top dead center position with an attached nozzle extension, provides an increased level of casting control and quality. The nozzle extension provides a means of containing the molten pool above the rotating substrate to increase the control of molten metal at the edges of the strip and increase the range of coating thicknesses which may be produced. The level of molten metal in the containment means is regulated to be above the level of melt supplying the casting nozzle which produces a condition of planar drag flow with the casting substrate prior to solidification.

  5. Emission of nearly stripped carbon and oxygen from the sun

    NASA Technical Reports Server (NTRS)

    Sciambi, R. K.; Gloeckler, G.; Fan, C. Y.; Hovestadt, D.

    1975-01-01

    Energy spectra of nearly stripped carbon and oxygen nuclei were observed during several solar particle events indicating a systematic deviation of these spectra from a simple power law. The spectra bend below 100 keV per nucleon and the degree of turn-over are highly correlated with the size of the flare, as measured by the event averaged flux of 130 to 220 keV protons. The energy spectra of helium computed for the same time periods do not show a similar feature. A large variability of the alpha/CNO ratio from event to event (from 2 to about 20 at 40 keV per nucleon) is found, and, in all cases examined, the carbon and oxygen nuclei are nearly fully stripped. These results are interpreted as evidence for storage of energetic ions in hot (T sub e is approximatey 1.5 million K) coronal regions, followed by strong adiabatic deceleration.

  6. A new semicustom integrated bipolar amplifier for silicon strip detectors

    SciTech Connect

    Zimmerman, T.

    1989-07-11

    The QPA02 is a four channel DC coupled two stage transimpedance amplifier designed at Fermilab on a semicustom linear array (Quickchip 2S) manufactured by Tektronix. The chip was developed as a silicon strip amplifier but may have other applications as well. Each channel consists of a preamplifier and a second stage amplifier/sharper with differential output which can directly drive a transmission line (90 to 140 ohms). External bypass capacitors are the only discrete components required. QPA02 has been tested and demonstrated to be an effective silicon strip amplifier. Other applications may exist which can use this amplifier or a modified version of this amplifier. For example, another design is now in progress for a wire chamber amplifier, QPA03, to be reported later. Only a relatively small effort was required to modify the design and layout for this application. 11 figs.

  7. Calibrationless determination of mercury by flow-through stripping coulometry.

    PubMed

    Beinrohr, E; Cakrt, M; Dzurov, J; Kottas, P; Kozáková, E

    1996-09-01

    Trace concentrations of Hg were determined in a flow-system by constant current stripping chronopotentiometry in coulometric mode. Mercury was electrodeposited from the flowing sample solution in an electrochemical flow-through cell on a large surface porous electrode plated with a thin layer of gold. The deposited mercury was then stripped with constant current and the potential change of the working electrode was recorded and evaluated. Since complete electrochemical yields were achieved at both the deposition and dissolution steps, the mercury concentration in the sample solution could be calculated from Faraday's law. The detection limit and reproducibility of the method were about 0.1 ng/ml for 10 ml sample solution and 4%, respectively. The time for a complete analysis was 2 to 5 min. The utility of the method was demonstrated with the analysis of reference materials, water samples, waste materials, plants and charcoal catalysts.

  8. Comparison of methods of producing very highly stripped uranium beams

    SciTech Connect

    Brown, I.G.

    1983-10-01

    A comparison is made between the production of high intensity beams of helium-like uranium ions, U/sup 90 +/, by conventional and exotic ion sources, and by the foil stripping of highly accelerated ions output from the Bevalac. The parameter requirements are specified and compared to the parameters achievable by present day ion source technology. The EBIS (Electron Beam Ion Source) comes closest to satisfying the necessary parameters, and this possibility is considered in some detail. We conclude that existing and near-future ion source technology does not provide a means of production of high intensity U/sup 90 +/ beams. Foil stripping of lower charge state species that have been accelerated through the Bevalac provides a convenient approach.

  9. Dietary behaviours and dental fluorosis among Gaza Strip children.

    PubMed

    Abuhaloob, L; Abed, Y

    2013-07-01

    A high prevalence of dental fluorosis has been identified among children in the Gaza Strip. This study aimed to determine the history of breastfeeding and dietary behaviours among children in the Gaza Strip and to examine potential associations with the prevalence and severity of dental fluorosis. A cross-sectional study recruited a stratified cluster random sample of 350 children aged 12-18 years and their mothers. Data about dietary behaviours in the first 7 years of life were collected by interview questionnaire. Dental fluorosis was determined using the Thyllstrup-Fejerskov index. A majority of children were breastfed exclusively in the first 6 months (82.9%) but 98.1% were given tea in the first year of life. The prevalence of dental fluorosis was 78.0%. Both intake of animal proteins and plant proteins were negatively associated with the prevalence and severity of dental fluorosis. Further studies to investigate fluoride intake is required to plan preventive interventions.

  10. Modification of the argon stripping target of the tandem accelerator.

    PubMed

    Makarov, A; Ostreinov, Yu; Taskaev, S; Vobly, P

    2015-12-01

    The tandem accelerator with vacuum insulation has been proposed and developed in Budker Institute of Nuclear Physics. Negative hydrogen ions are accelerated by the positive 1MV potential of the high-voltage electrode, converted into protons in the gas stripping target inside the electrode, and then protons are accelerated again by the same potential. A stationary proton beam with 2 MeV energy, 1.6 mA current, 0.1% energy monochromaticity, and 0.5% current stability is obtained now. To conduct Boron Neutron Capture Therapy it is planned to increase the proton beam current to at least 3 mA. The paper presents the results of experimental studies clarifying the reasons for limiting the current, and gives suggestions for modifying the gas stripping target in order to increase the proton beam current along with the stability of the accelerator.

  11. Modification of the argon stripping target of the tandem accelerator.

    PubMed

    Makarov, A; Ostreinov, Yu; Taskaev, S; Vobly, P

    2015-12-01

    The tandem accelerator with vacuum insulation has been proposed and developed in Budker Institute of Nuclear Physics. Negative hydrogen ions are accelerated by the positive 1MV potential of the high-voltage electrode, converted into protons in the gas stripping target inside the electrode, and then protons are accelerated again by the same potential. A stationary proton beam with 2 MeV energy, 1.6 mA current, 0.1% energy monochromaticity, and 0.5% current stability is obtained now. To conduct Boron Neutron Capture Therapy it is planned to increase the proton beam current to at least 3 mA. The paper presents the results of experimental studies clarifying the reasons for limiting the current, and gives suggestions for modifying the gas stripping target in order to increase the proton beam current along with the stability of the accelerator. PMID:26242555

  12. 46. SECOND FLOOR CEILING FRAMING. The 1812 furring strips are ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    46. SECOND FLOOR CEILING FRAMING. The 1812 furring strips are still in place, fastened to the undersides of the 1755 joists. The joists frame into the bottom chords of the 1755 salvaged trusses. Note the numerals, VIII (8), N (9), X (10), and XI (11) on alternate panels of the bottom chord of the truss. Between the reinforcing plates note the numeral VII (7), added for the 1812 installation - Twelfth Street Meeting House, 20 South Twelfth Street, Philadelphia, Philadelphia County, PA

  13. The D0 silicon micro-strip tracker

    SciTech Connect

    Weber, Michael S.; /Fermilab

    2006-01-01

    The D0 silicon micro-strip tracker (SMT) is part of the D0 upgrade for the Tevatron RunII at Fermilab. The detector has been running successfully since the start of the RunII physics data taking. The tracking and vertexing performance match the expectation from Monte-Carlo studies. An additional inner layer (Layer0) of silicon sensors at R = 1.6cm will be installed in 2005.

  14. Energy-Efficient Bioalcohol Recovery by Gel Stripping

    NASA Astrophysics Data System (ADS)

    Godbole, Rutvik; Ma, Lan; Hedden, Ronald

    2014-03-01

    Design of energy-efficient processes for recovering butanol and ethanol from dilute fermentations is a key challenge facing the biofuels industry due to the high energy consumption of traditional multi-stage distillation processes. Gel stripping is an alternative purification process by which a dilute alcohol is stripped from the fermentation product by passing it through a packed bed containing particles of a selectively absorbent polymeric gel material. The gel must be selective for the alcohol, while swelling to a reasonable degree in dilute alcohol-water mixtures. To accelerate materials optimization, a combinatorial approach is taken to screen a matrix of copolymer gels having orthogonal gradients in crosslinker concentration and hydrophilicity. Using a combination of swelling in pure solvents, the selectivity and distribution coefficients of alcohols in the gels can be predicted based upon multi-component extensions of Flory-Rehner theory. Predictions can be validated by measuring swelling in water/alcohol mixtures and conducting h HPLC analysis of the external liquid. 95% + removal of butanol from dilute aqueous solutions has been demonstrated, and a mathematical model of the unsteady-state gel stripping process has been developed. NSF CMMI Award 1335082.

  15. Air stripping VOCs from groundwater: Process design considerations

    SciTech Connect

    Ball, B.R.; Edwards, M.D. )

    1992-02-01

    Considerations for evaluating and designing the air stripping process are presented by case study. The case study involves the design of an air stripping process to remediate groundwater contaminated with volatile organic compounds (VOCs) at a National Priorities List site in Tacoma, WA. Design objectives included developing a tower with minimum volume and energy requirements while complying with discharge air and water quality standards. A two-phase resistance model using Onda Correlations to determine liquid- and gas-phase mass transfer coefficients was used to assist in the evaluation and design. Considerations for applying the two-phase resistance model to air stripping tower design are presented. The ability of the model to simulate process performance is demonstrated by comparison with actual data for 11 priority pollutant list VOCs evaluated during an onsite pilot study. Design procedures with which to develop a tower with minimum volume and energy requirements are described. Other considerations involving the evaluation of VOC emissions and the precipitation and buildup of inorganic constituents within the internal packing media are described.

  16. On the performance of a cascade crossflow air stripping column

    SciTech Connect

    Akiyama, Y.; Valsaraj, K.T.; Wetzel, D.M.; Harrison, D.P.

    1996-10-01

    The cascade crossflow packed column is an innovative design that offers the separation advantages of countercurrent flow while avoiding flooding limitations. Liquid and gas cross-sectional flow areas and path length in contact with packing may be controlled independently. These features are illustrated by studying the air stripping of methylene chloride (MeCl), 1,2-dichloroethane (1,2-DCA), and methyl ethyl ketone (MEK). Stripping efficiencies in the cascade crossflow column were generally slightly smaller than in countercurrent flow at equal liquid and gas flow rates. However larger gas-to-liquid ratios were possible in crossflow, permitting larger maximum stripping efficiencies to be attained. The experimental mass transfer coefficients were smaller than predicted by the Onda correlation. Modifications to the gas-phase Onda correlation are proposed that reduce the magnitude of the average deviation between experiment and prediction for 40 tests to about 12%. Experimental values of 38 of 40 tests were within {+-}30% of modified Onda correlation predictions. Additional applications for the cascade crossflow concept are suggested, such as vacuum distillation columns and trickle-bed reactors, which require low pressure drop and/or large gas-to-liquid ratios.

  17. Cross-flow versus counterflow air-stripping towers

    SciTech Connect

    Little, J.C.; Marinas, B.J.

    1997-07-01

    Mass-transfer and pressure-drop packing performance correlations are used together with tower design equations and detailed cost models to compare the effectiveness of cross-flow and counterflow air stripping towers over a wide range of contaminant volatility. Cross-flow towers are shown to offer a significant economic advantage over counterflow towers when stripping low volatility organic contaminants primarily due to savings in energy costs. These savings increase as contaminant volatility decreases and as water flow rate increases. A further advantage of the cross-flow configuration is that it extends the feasible operating range for air stripping as cross-flow towers can accommodate higher air-to-water flow ratios than conventional counterflow towers. Finally it is shown that the optimized least-cost design for both counterflow and cross-flow towers varies with Henry`s law constant, water flow rate, and percent removal, but that the optimum is virtually insensitive to other cost and operating variables. This greatly simplifies the tower design procedure.

  18. Stripping volatile organic compounds and petroleum hydrocarbons from water

    SciTech Connect

    LaBranche, D.F.; Collins, M. R.

    1996-05-01

    Volatile organic compounds (VOCs) and petroleum products are ubiquitous groundwater contaminants. Petroleum products, for example, diesel fuel, contain a wide array of volatile, semivolatile, and large-chain hydrocarbon compounds. This research sought to determine whether air stripping can provide a site-specific treatment solution for petroleum-contaminated groundwaters and to document the abilities and limitations of tray-type (ShallowTray{sup TM}) air-stripping technology. Full factorial experimental trials were conducted to determine the influence of inlet water flow rate and temperature on trichloroethylene (TCE), perchloroethylene (PCE), and total petroleum hydrocarbon (TPH) removal. As expected, TPH removal controlled air stripper performance, and liquid temperature affected removal more than flow rate. The mass-transfer rate of TCE and PCE from water to air was controlled by the compound`s volatility, whereas the TPH mass-transfer rate was controlled by the compound`s concentration gradient. Results indicate that economical air stripping of VOC and TPH compounds can be achieved using low liquid flow rates (20 to 75 L/min), high air/water ratios (225 to 898), and medium liquid temperatures (16{degree}C to 28{degree}C) in tray-type air strippers. 19 refs., 7 figs., 6 tabs.

  19. Environmental contamination of groundwater in the Gaza Strip

    NASA Astrophysics Data System (ADS)

    Al-Agha, M. R.

    1995-03-01

    Environmental problems of groundwater contamination in the Gaza Strip are summarized in this paper. The Gaza Strip is a very narrow and highly populated area along the coast of the Mediterranean Sea (360 km2). Human activities greatly threaten the groundwater resources in the area, while the unconfined nature of some parts of the coastal main aquifer favors groundwater contamination. Recent investigations show contamination of the aquifer with organic substances from detergents, agrochemicals, sewage (cesspools), and waste degradation. These effects enhance each other because there is no recycling industry, sewage system, or any type of environmental protection management at present. Inorganic contamination results from overpumping, which increases the salinity of the groundwater. Seawater intrusion also increases the salinity of the groundwater that are used for drinking and agricultural purposes. Consequently, at present about 80 percent of the groundwater in the Gaza Strip is unfit for both human and animal consumption. Solutions are very urgently needed for these problems in order to prevent the spread of dangerous diseases.

  20. Buckling of a Flexible Strip Sliding on a Frictional Base

    NASA Astrophysics Data System (ADS)

    Huynen, Alexandre; Marck, Julien; Denoel, Vincent; Detournay, Emmanuel

    2013-03-01

    The main motivation for this contribution is the buckling of a drillstring sliding on the bottom of the horizontal section of borehole. The open questions that remain today are related to the determination of the onset of instability, and to the conditions under which different modes of constrained buckling occur. In this presentation, we are concerned by a two-dimensional version of this problem; namely, the sliding of a flexible strip being fed inside a conduit. The ribbon, which has a flexural rigidity EI and a weight per unit length w, is treated as an inextensible elastica of negligible thickness. The contact between the ribbon and the wall of the conduit is characterized by a friction coefficient μ. First, we report the result of a stability analysis that aims at determining the critical inserted length of the ribbon l* (μ) (scaled by the characteristic length λ =(EI / w) 1 / 3) at which there is separation between the strip and the conduit bottom, as well as the buckling mode. Next, the relationship between the feeding force F and the inserted length l after bifurcation is computed. Finally, the results of a ``kitchen table'' experiment involving a strip of silicon rubber being pushed on a plank are reported and compared with predictions.

  1. Producing Foils From Direct Cast Titanium Alloy Strip

    NASA Technical Reports Server (NTRS)

    Stuart, T. A.; Gaspar, T. A.; Sukonnik, I. M.; Semiatan, S. L.; Batawi, E.; Peters, J. A.; Fraser, H. L.

    1996-01-01

    This research was undertaken to demonstrate the feasibility of producing high-quality, thin-gage, titanium foil from direct cast titanium strip. Melt Overflow Rapid Solidification Technology (MORST) was used to cast several different titanium alloys into 500 microns thick strip, 10 cm wide and up to 3 m long. The strip was then either ground, hot pack rolled or cold rolled, as appropriate, into foil. Gamma titanium aluminide (TiAl) was cast and ground to approximately 100 microns thick foil and alpha-2 titanium aluminide (Ti3AI) was cast and hot pack rolled to approximately 70 microns thick foil. CP Ti, Ti6Al2Sn4Zr2Mo, and Ti22AI23Nb (Orthorhombic), were successfully cast and cold-rolled into good quality foil (less than 125 microns thick). The foils were generally fully dense with smooth surfaces, had fine, uniform microstructures, and demonstrated mechanical properties equivalent to conventionally produced titanium. By eliminating many manufacturing steps, this technology has the potential to produce thin gage, titanium foil with good engineering properties at significantly reduced cost relative to conventional ingot metallurgy processing.

  2. In-situ conditioning of a strip casting roll

    DOEpatents

    Williams, Robert S.; Campbell, Steven L.

    1997-01-01

    A strip caster (10) for producing a continuous strip (24) has a tundish (12) for containing a melt (14) and a pair of horizontally disposed water cooled casting rolls (22). The casting rolls are juxtaposed relative to one another for forming a pouring basin (18) for receiving the melt through a teeming tube (16) thereby establishing a meniscus (20) between the rolls for forming a strip (24). The melt is protected from the outside air by a non-oxidizing gas passed through a supply line (28) to a sealing chamber (26). Devices (29) for conditioning the outer peripheral chill surfaces of the casting rolls includes grit blasting nozzles (30A, 30B, 30C, 30D), a collection trough (32) for gathering the grit, a line (34) for recycling the grit to a bag house (36), a feeder (38) and a pressurized distributor (40) for delivering the grit to the nozzles. The conditioning nozzles remove dirt, metal oxides and surface imperfections providing a clean surface readily wetted by the melt.

  3. Sexy ladies sexing ladies: women as consumers in strip clubs.

    PubMed

    Wosick-Correa, Kassia R; Joseph, Lauren J

    2008-01-01

    Recent shifts in the consumer base of the sex industry have involved greater female attendance in strip clubs. This article examines how strip clubs and dancers incorporate female patrons into a sexualized space traditionally designed for men by identifying three interactional processes: passing over, sidestaging, and tailoring. We suggest dancers pass over women because they perceive female patron behavior to include resistance to "buying the game" and spending patterns that diverge from male customers. Drawing on Goffman's dramaturgical analysis, we suggest the dynamic relationship between dancer and female patron involves what we term sidestaging, which refers to both dancers' disclosure and how the club's spatial organization inhibits the construction of women as customers through sharing gendered spaces, such as the bathroom. We argue that when a dancer tailors her lap dance for a female patron, she succeeds in acknowledging the female customer's sexual subjectivity and potential same-sex desires by providing an individualized avenue for exploring an erotic experience. Finally, we discuss data implications for understanding how same-sex desire and sexual identity operate in an environment that eroticizes the female form, and how the strip club becomes a potential space for engaging in same-sex eroticism that includes elements of play.

  4. Sexy ladies sexing ladies: women as consumers in strip clubs.

    PubMed

    Wosick-Correa, Kassia R; Joseph, Lauren J

    2008-01-01

    Recent shifts in the consumer base of the sex industry have involved greater female attendance in strip clubs. This article examines how strip clubs and dancers incorporate female patrons into a sexualized space traditionally designed for men by identifying three interactional processes: passing over, sidestaging, and tailoring. We suggest dancers pass over women because they perceive female patron behavior to include resistance to "buying the game" and spending patterns that diverge from male customers. Drawing on Goffman's dramaturgical analysis, we suggest the dynamic relationship between dancer and female patron involves what we term sidestaging, which refers to both dancers' disclosure and how the club's spatial organization inhibits the construction of women as customers through sharing gendered spaces, such as the bathroom. We argue that when a dancer tailors her lap dance for a female patron, she succeeds in acknowledging the female customer's sexual subjectivity and potential same-sex desires by providing an individualized avenue for exploring an erotic experience. Finally, we discuss data implications for understanding how same-sex desire and sexual identity operate in an environment that eroticizes the female form, and how the strip club becomes a potential space for engaging in same-sex eroticism that includes elements of play. PMID:18686149

  5. Fabrication of double-sided thallium bromide strip detectors

    NASA Astrophysics Data System (ADS)

    Hitomi, Keitaro; Nagano, Nobumichi; Onodera, Toshiyuki; Kim, Seong-Yun; Ito, Tatsuya; Ishii, Keizo

    2016-07-01

    Double-sided strip detectors were fabricated from thallium bromide (TlBr) crystals grown by the traveling-molten zone method using zone-purified materials. The detectors had three 3.4-mm-long strips with 1-mm widths and a surrounding electrode placed orthogonally on opposite surfaces of the crystals at approximately 6.5×6.5 mm2 in area and 5 mm in thickness. Excellent charge transport properties for both electrons and holes were observed from the TlBr crystals. The mobility-lifetime products for electrons and holes in the detector were measured to be ~3×10-3 cm2/V and ~1×10-3 cm2/V, respectively. The 137Cs spectra corresponding to the gamma-ray interaction position were obtained from the detector. An energy resolution of 3.4% of full width at half maximum for 662-keV gamma rays was obtained from one "pixel" (an intersection of the strips) of the detector at room temperature.

  6. In-situ conditioning of a strip casting roll

    DOEpatents

    Williams, R.S.; Campbell, S.L.

    1997-07-29

    A strip caster (10) for producing a continuous strip (24) has a tundish (12) for containing a melt (14) and a pair of horizontally disposed water cooled casting rolls (22). The casting rolls are juxtaposed relative to one another for forming a pouring basin (18) for receiving the melt through a teeming tube (16) thereby establishing a meniscus (20) between the rolls for forming a strip (24). The melt is protected from the outside air by a non-oxidizing gas passed through a supply line (28) to a sealing chamber (26). Devices (29) for conditioning the outer peripheral chill surfaces of the casting rolls includes grit blasting nozzles (30A, 30B, 30C, 30D), a collection trough (32) for gathering the grit, a line (34) for recycling the grit to a bag house (36), a feeder (38) and a pressurized distributor (40) for delivering the grit to the nozzles. The conditioning nozzles remove dirt, metal oxides and surface imperfections providing a clean surface readily wetted by the melt.

  7. a Smart Polymer Composite Actuator with Thin Sma Strips

    NASA Astrophysics Data System (ADS)

    Kim, Cheol

    The characteristics of SMA to provide a high force and a large strain make them a good candidate for an actuator for controlling the shape of smart structures. Using a mathematical model that captures the thermo-mechanical behaviors and 2-way shape memory effect (TWSME) of SMA, some smart shell structures were analyzed numerically and experimentally. The deflections of morphing shells to that thin SMA strips are attached were investigated depending on various phase transformation temperatures. SMA strips start to transform from the martensitic into the austenitic state upon actuation through resistive heating, simultaneously recover the prestrain, and thus cause the shell structures to deform three dimensionally. The behaviors of composite shells with SMA strips were analyzed using FEM and 3-D constitutive equations of SMA. Several morphing composite shell structures were fabricated and their experimental shape changes depending on temperatures were compared to the numerical results. That two results show good correlations indicates FEA and 3-D constitutive equations are accurate enough to utilize them for the design of smart shell structures for various applications.

  8. Colloidal gold probe based rapid immunochromatographic strip assay for cortisol.

    PubMed

    Nara, Seema; Tripathi, Vinay; Singh, Harpal; Shrivastav, Tulsidas G

    2010-12-01

    A rapid and semi-quantitative immunochromatographic strip (ICS) test for cortisol analysis in serum was developed. The test strip was based on a competitive assay format. Colloidal gold nanoparticles were synthesized and coupled with cortisol-3-carboxymethyloxime-adipic acid dihydrazide-bovine serum albumin (F-3-CMO-ADH-BSA) antigen to directly compete with cortisol in human serum samples. F-3-CMO-ADH-BSA-gold label and uncoupled colloidal gold nanoparticles were appropriately characterized using UV-vis spectroscopy, transmission electron microscopy and atomic force microscopy. Anticortisol antibody raised against F-3-CMO-BSA immunogen in New Zealand white rabbits was coated on the NC membrane as test line. Anti-BSA antibody was used as control line. The lower detection limit of the ICS test was 30 ngmL(-1) with visual detection and was completed in 10 min. About 30 human serum samples were also analyzed by the developed strip test and their range of cortisol concentration was established. The developed ICS test is rapid, economic and user friendly. PMID:21056716

  9. A Diamond Micro-strip Electron Detector for Compton Polarimetry

    NASA Astrophysics Data System (ADS)

    Narayan, Amrendra

    2012-03-01

    The Qweak experiment at Jefferson Lab aims to measure the weak charge of the proton with a precision of 4.1% by measuring the parity violating asymmetry in polarized electron-proton elastic scattering. Beam polarimetry is the largest experimental contribution to the error budget. A new Compton polarimeter was installed in Fall 2010 for a non-invasive and continuous monitoring of the electron beam polarization in Hall C at Jefferson Lab. The Compton-scattered electrons are detected in four planes of diamond micro-strip detectors. This is the first use of diamond micro-strip detectors as a tracking device in a physics experiment. These detectors are read out using custom built electronic modules that include a pre-amplifier, a pulse shaping amplifier and a discriminator for each detector micro-strip. We use Field Programmable Gate Array based general purpose logic modules for event selection and histogramming. This polarimeter is being used for online monitoring of beam polarization in the experiment. We have achieved the design goals of 1% statistical uncertainity per hour and expect to achieve 1% systematic uncertainity. We will discuss the details of our polarimetry setup, the analysis approach and the preliminary results.

  10. Ultra-stripped Type Ic Supernovae from Close Binary Evolution

    NASA Astrophysics Data System (ADS)

    Tauris, T. M.; Langer, N.; Moriya, T. J.; Podsiadlowski, Ph.; Yoon, S.-C.; Blinnikov, S. I.

    2013-12-01

    Recent discoveries of weak and fast optical transients raise the question of their origin. We investigate the minimum ejecta mass associated with core-collapse supernovae (SNe) of Type Ic. We show that mass transfer from a helium star to a compact companion can produce an ultra-stripped core which undergoes iron core collapse and leads to an extremely fast and faint SN Ic. In this Letter, a detailed example is presented in which the pre-SN stellar mass is barely above the Chandrasekhar limit, resulting in the ejection of only ~0.05-0.20 M ⊙ of material and the formation of a low-mass neutron star (NS). We compute synthetic light curves of this case and demonstrate that SN 2005ek could be explained by our model. We estimate that the fraction of such ultra-stripped to all SNe could be as high as 10-3-10-2. Finally, we argue that the second explosion in some double NS systems (for example, the double pulsar PSR J0737-3039B) was likely associated with an ultra-stripped SN Ic.

  11. Production of arthropod pests and vectors in coal-strip-mine ponds

    SciTech Connect

    Pickard, E.

    1982-01-01

    The objective was to determine the species of aquatic arthropod pests, mainly mosquitoes, that were breeding in abandoned coal strip mine ponds, their population densities, and whether these breeding sites would serve as foci for annoyance to surrounding human populations. Nine study ponds were selected in Marion County, Alabama, on the basis of age since formation, with a total of three test ponds in each of three age categories: 1 year old, 5 years old, and 10 years old. These ponds were observed for five successive years; thus, data obtained from surveys depict successional changes in aquatic insect and plant species composition over a period of 14 successive years. Mosquito larvae of four genera including eight species were collected from the strip ponds. Mosquito production was not detected until ponds were at least two years old, and ponds five years old and older were the most productive for mosquitoes. Mosquito production in all ponds was sparse and restricted to narrow vegetated areas along shallow marginal shelves, and the level of mosquito activity was not sufficient to cause severe annoyance to surrounding communities. There was a paucity of insects of medical importance in benthic samples in the nine study ponds; only three genera of public health importance were collected, which consisted of Palpomyia, Chrysops, and Tabanus. Water chemistry of all ponds studied provided very favorable conditions for supporting various fauna and flora. Data obtained during the 5-year study showed no significant change in the pH of the water in the nine study ponds as they increased in age. The dissolved oxygen content of the water in the ponds varied widely with pond age and seasonal changes, ranging from 9.1 to 14.1 ppM.

  12. Jellyfish: Observational Properties of Extreme Ram-Pressure Stripping Events in Massive Galaxy Clusters

    NASA Astrophysics Data System (ADS)

    Conor, McPartland; Ebeling, Harald; Roediger, Elke

    2015-08-01

    We investigate the physical origin and observational signatures of extreme ram-pressure stripping (RPS) in 63 massive galaxy clusters at z=0.3-0.7, based on data in the F606W passband obtained with the Advanced Camera for Surveys aboard the Hubble Space Telescope. Using a training set of a dozen ``jellyfish" galaxies identified earlier in the same imaging data, we define quantitative morphological criteria to select candidate galaxies which are similar to known cases of RPS. Considering a sample of 16 ``jellyfish" galaxies (10 of which we present for the first time), we visually derive estimates of the projected direction of motion based on dynamical features such as apparent compression shocks and debris trails. Our findings suggest that the observed events occur primarily at large distances from the cluster core and involve infall trajectories featuring high impact parameters. Simple models of cluster growth show that such trajectories are consistent with two scenarios: 1) galaxy infall along filaments; and 2) infall at high velocities (≥1000 km/s) characteristic of cluster mergers. The observed distribution of events is best described by timescales of ˜few Myr in agreement with recent numerical simulations of RPS. The broader areal coverage of the Hubble Frontier Fields should provide an even larger sample of RPS events to determine the relative contributions of infall and cluster mergers. Prompted by the discovery of several jellyfish galaxies whose brightness in the F606W passband rivals or exceeds that of the respective brightest cluster galaxy, we attempt to constrain the luminosity function of galaxies undergoing RPS. The observed significant excess at the bright end compared to the luminosity functions of blue cluster members strongly suggests enhanced star formation, thus challenging theoretical and numerical studies according to which RPS merely displaces existing star-forming regions. In-depth studies of individual objects will help test our

  13. Witnessing a merging bullet being stripped in the galaxy cluster RXCJ2359.3-6042

    NASA Astrophysics Data System (ADS)

    Chon, Gayoung; Böhringer, Hans

    2015-02-01

    We report the discovery of the merging cluster, RXCJ2359.3-6042, from the REFLEX II cluster survey and present our results from all three detectors combined in the imaging and spectral analysis of the XMM-Newton data. Also known as Abell 4067, this is a unique system, where a compact bullet penetrates an extended, low density cluster at redshift z = 0.0992 clearly seen from our follow-up XMM-Newton observation. The bullet goes right through the central region of the cluster without being disrupted and we can clearly see how the bullet component is stripped of its layers outside the core. There is an indication of a shock heated region in the east of the cluster with a higher temperature. The bulk temperature of the cluster is about 3.12(±0.13) keV implying a lower mass system. Spearheading the bullet is a cool core centred by a massive early type galaxy. The temperatures and metallicities of a few regions in the cluster derived from the spectral analysis supports our conjecture based on the surface brightness image that a much colder compact component at 1.55(±0.10) keV with large metallicity (0.75 Z⊙) penetrates the main cluster, where the core of the infalling component survived the merger and left stripped gas behind at the centre of the main cluster. We also give an estimate of the total mass within r500, which is about 2 × 1014 M⊙ from the deprojected spherical β modelling of the cluster in good agreement with other mass estimates from the M - TX and M - σv relations.

  14. Effect of training on the performance of blood glucose monitoring using a reagent strip (Glucoprofil).

    PubMed

    Chantelau, E; Starostina, E G; Antsiferov, M B

    1990-11-01

    A relatively simple, new test-strip for blood-glucose monitoring, the Glucoprofil strip with a reaction-zone of film-foil, was evaluated by testing 100 different blood glucose concentrations between 2.1 and 29.7 mmol/l. The results were obtained visually before and after training to read the color changes of the strip according to the scale on the strip-container. Plasma glucose measurements with the Beckman Glucose-Analyzer were used for reference. The results show that the Glucoprofil-strip readings correlated well with the reference method (r = 0.97), thorough training provided. The mean deviation of the strip results was less than 1 mmol/l. Similar results were obtained using another blood glucose strip, the Haemoglukotest 20-800 R. Our study indicates that the performance of the Glucoprofil strip is satisfactory, and hence the strip may be useful for clinical purposes. Consistent with previous reports we could demonstrate that training improved the reading results of the Glucoprofil strip.

  15. Air stripping of ammonia in a water-sparged aerocyclone reactor.

    PubMed

    Quan, Xuejun; Wang, Fuping; Zhao, Qinghua; Zhao, Tiantao; Xiang, Jinxin

    2009-10-30

    Air stripping of ammonia is a widely used process for the pretreatment of wastewater. Scaling and fouling on the packing surface in packed towers and a lower stripping efficiency are the two major problems in this process. New equipment that is suitable for the air stripping of wastewater with suspended solids has been developed. Air stripping of ammonia from water with Ca(OH)2 was performed in the newly designed gas-liquid contactor, a water-sparged aerocyclone (WSA). WSA exhibited a higher air stripping efficiency and an excellent mass transfer performance, it also consumed less air compared with stripping tanks and packed towers. In addition, no scaling and fouling was observed in the inner structure of the WSA. During the stripping process, the stripping efficiency and mass transfer coefficient naturally increases with the liquid phase temperature and air flow rate. There is a critical value for the air flow rate over which stripping efficiency and the mass transfer coefficient increases rapidly. An efficient air stripping of ammonia should be conducted at a higher ambient temperature (>25 degrees C), and a higher air flow rate (>1.4 l/s).

  16. Geological and petrophysical characterization of the Ferron Sandstone for 3-D simulation of a fluvial-deltaic reservoir. Deliverable 2.5.4, Ferron Sandstone lithologic strip logs, Emergy & Sevier Counties, Utah: Volume I

    SciTech Connect

    Allison, M.L.

    1995-12-08

    Strip logs for 491 wells were produced from a digital subsurface database of lithologic descriptions of the Ferron Sandstone Member of the Mancos Shale. This subsurface database covers wells from the parts of Emery and Sevier Counties in central Utah that occur between Ferron Creek on the north and Last Chance Creek on the south. The lithologic descriptions were imported into a logging software application designed for the display of stratigraphic data. Strip logs were produced at a scale of one inch equals 20 feet. The strip logs were created as part of a study by the Utah Geological Survey to develop a comprehensive, interdisciplinary, and qualitative characterization of a fluvial-deltaic reservoir using the Ferron Sandstone as a surface analogue. The study was funded by the U.S. Department of Energy (DOE) under the Geoscience/Engineering Reservoir Characterization Program.

  17. Costs of Producing Biomass from Riparian Buffer Strips

    SciTech Connect

    Turhollow, A.

    2000-09-01

    Nutrient runoff from poultry litter applied to agricultural fields in the Delmarva Peninsula contributes to high nutrient loadings in Chesapeake Bay. One potential means of ameliorating this problem is the use of riparian buffer strips. Riparian buffer strips intercept overland flows of water, sediments, nutrients, and pollutants; and ground water flows of nutrients and pollutants. Costs are estimated for three biomass systems grown on buffer strips: willow planted at a density of 15,300 trees/ha (6200 trees/acre); poplar planted at a density of 1345 trees/ha (545 trees/acre); and switchgrass. These costs are estimated for five different scenarios: (1) total economic costs, where everything is costed [cash costs, noncash costs (e.g., depreciation), land rent, labor]; (2) costs with Conservation Reserve Program (CRP) payments (which pays 50% of establishment costs and an annual land rent); (3) costs with enhanced CRP payments (which pays 95% of establishment costs and an annual payment of approximately 170% of land rent for trees and 150% of land rent for grasses); (4) costs when buffer strips are required, but harvest of biomass is not required [costs borne by biomass are for yield enhancing activities (e.g., fertilization), harvest, and transport]; and (5) costs when buffer strips are required. and harvest of biomass is required to remove nutrients (costs borne by biomass are for yield enhancing activities and transport). CRP regulations would have to change to allow harvest. Delivered costs of willow, poplar, and switchgrass [including transportation costs of $0.38/GJ ($0.40/million Btu) for switchgrass and $0.57/GJ ($0.60/million Btu) for willow and poplar] at 11.2 dry Mg/ha-year (5 dry tons/acre-year) for the five cost scenarios listed above are [$/GJ ($million BIN)]: (1) 3.30-5.45 (3.45-5.75); (2) 2.30-3.80 (2.45-4.00); (3) 1.70-2.45 (1.80-2.60); (4) l-85-3.80 (1.95-4.05); and (5) 0.80-1.50 (0.85-1.60). At yields of 15.7 to 17.9 GJ/ha-year (7 to 8 dry tons

  18. Evaluation of Nobuto filter paper strips for the detection of avian influenza virus antibody in waterfowl

    USGS Publications Warehouse

    Dusek, Robert J.; Hall, Jeffrey S.; Nashold, Sean W.; TeSlaa, Joshua L.; Ip, Hon S.

    2011-01-01

    The utility of using Nobuto paper strips for the detection of avian influenza antibodies was examined in mallards (Anas platyrhynchos) experimentally infected with low pathogenic avian influenza viruses. Blood was collected 2 wk after infection and was preserved either as serum or whole blood absorbed onto Nobuto strips. Analysis of samples using a commercially available blocking enzyme-linked immunosorbent assay revealed comparable results (≥96% sensitivity for all methods) between sera stored at -30 C and the Nobuto strip preservation method even when the Nobuto strips were stored up to 3 mo at room temperature (RT). Significant differences were detected in the ratio of sample absorbance to negative control absorbance for Nobuto strips stored at RT compared with sera stored at -30 C, although these differences did not affect the ability of the test to reliably detect positive and negative samples. Nobuto strips are a convenient and sensitive alternative to the collection of serum samples when maintaining appropriate storage temperatures is difficult.

  19. Intelligent control of robotic paint stripping using color-vision feedback

    NASA Astrophysics Data System (ADS)

    Harvey, Dennis N.; Rogers, Thomas W.

    A robotic work cell for stripping paint from both large and small aircraft is currently under development at Pratt & Whitney - Waterjet Systems (formerly USBI Co., Advanced Programs). The primary objectives for this system are to reduce the time required to strip an aircraft, improve the quality and consistency of the stripping operation, and reduce the need for environmentally objectionable stripping processes such as chemical methods. One of the keys to the overall success of this automated paint stripping system is the integration of a sensor that will provide for adaptive process control. This sensor must be able to indicate when a layer of paint has been completely stripped from the aircraft, and measure the approximate size of any remaining unstripped patches. The sensor should also be able to indicate when surface roughening is occurring on the material beneath the paint.

  20. A STRIPAK component Strip regulates neuronal morphogenesis by affecting microtubule stability

    PubMed Central

    Sakuma, Chisako; Okumura, Misako; Umehara, Tomoki; Miura, Masayuki; Chihara, Takahiro

    2015-01-01

    During neural development, regulation of microtubule stability is essential for proper morphogenesis of neurons. Recently, the striatin-interacting phosphatase and kinase (STRIPAK) complex was revealed to be involved in diverse cellular processes. However, there is little evidence that STRIPAK components regulate microtubule dynamics, especially in vivo. Here, we show that one of the core STRIPAK components, Strip, is required for microtubule organization during neuronal morphogenesis. Knockdown of Strip causes a decrease in the level of acetylated α-tubulin in Drosophila S2 cells, suggesting that Strip influences the stability of microtubules. We also found that Strip physically and genetically interacts with tubulin folding cofactor D (TBCD), an essential regulator of α- and β-tubulin heterodimers. Furthermore, we demonstrate the genetic interaction between strip and Down syndrome cell adhesion molecule (Dscam), a cell surface molecule that is known to work with TBCD. Thus, we propose that Strip regulates neuronal morphogenesis by affecting microtubule stability. PMID:26644129

  1. Drosophila Strip serves as a platform for early endosome organization during axon elongation

    PubMed Central

    Sakuma, Chisako; Kawauchi, Takeshi; Haraguchi, Shuka; Shikanai, Mima; Yamaguchi, Yoshifumi; Gelfand, Vladimir I.; Luo, Liqun; Miura, Masayuki; Chihara, Takahiro

    2014-01-01

    Early endosomes are essential for regulating cell signalling and controlling the amount of cell surface molecules during neuronal morphogenesis. Early endosomes undergo retrograde transport (clustering) before their homotypic fusion. Small GTPase Rab5 is known to promote early endosomal fusion, but the mechanism linking the transport/clustering with Rab5 activity is unclear. Here we show that Drosophila Strip is a key regulator for neuronal morphogenesis. strip knockdown disturbs the early endosome clustering and Rab5-positive early endosomes become smaller and scattered. Strip genetically and biochemically interacts with both Glued (the regulator of dynein-dependent transport) and Sprint (the guanine nucleotide exchange factor for Rab5), suggesting that Strip is a molecular linker between retrograde transport and Rab5 activation. Overexpression of an active form of Rab5 in strip mutant neurons suppresses the axon elongation defects. Thus, Strip acts as a molecular platform for the early endosome organization that plays important roles in neuronal morphogenesis. PMID:25312435

  2. Scattering performance analysis of reflectance photometer for quantifying gold labeled test strips

    NASA Astrophysics Data System (ADS)

    Huang, Lihua; Zhang, Youbao; Xie, Chengke; Qu, Jianfeng; Huang, Huijie; Wang, Xiangzhao

    2008-12-01

    Gold labeled immunochromatography assay is widely used in many fields. Quantitative test can be realized by using a reflectance photometer. However, theoretical analysis of the strip and the photometer has seldom been reported. In this paper, the microstructure of immunochromatographic strip labeled by nanogold particles is analyzed with scanning electron microscope (SEM). Based on the SEM images of the strip, Mie's scattering theory is used to investigate the scattering behaviors of particles in the strip, and Lambert cosine law is applied to analyze the diffuse reflection of porous strip. Besides, a reflectance photometer for gold labeled test strip has been developed for fast quantification of immunochromatography assay in our group. Theoretical model is achieved by introducing the parameter of the developed reflectance photometer. The calculated scattering signal distribution is well consistent with that measured by the reflectance photometer.

  3. Procalcitonin Strip Test as an Independent Predictor in Acute Pancreatitis.

    PubMed

    Dias, Brendan Hermenigildo; Rozario, Anthony Prakash; Olakkengil, Santosh Antony; V, Anirudh

    2015-12-01

    Plasma procalcitonin (PCT) is a highly specific marker for the diagnosis of bacterial infection and sepsis. Studies have demonstrated its role in the setting of sepsis and acute pancreatitis. This study aims to analyze and compare the prognostic efficacy of plasma procalcitonin strip test in acute pancreatitis. A prospective study was conducted in the department of general surgery from June 2012 to June 2013. Plasma procalcitonin was estimated by the semiquantitative strip test. The study included a total of 50 patients diagnosed to have acute pancreatitis. Data was collected and statistically analyzed using SPSS version 17. Thirty-nine out of the 50 patients (78 %) were males with a mean age of 46.8 years (range, 25-78 years) and 25 patients (50 %) had ethanol-induced pancreatitis, while 13 patients (26 %) had gall stone pancreatitis. Plasma PCT values were found to correlate better than CRP levels and total leukocyte count with the total duration of hospitalization, ITU, and ICU stay, as well as with the progression to severe acute pancreatitis. A cut off for plasma PCT of >2 ng/mL was found to be 100 % sensitive and 100 % specific and a cut off for CRP of >19 mg/dL was 70 % sensitive and 65 % specific for predicting the progression to severe acute pancreatitis. Plasma PCT also correlated well with antibiotic requirement. A cut off value of >0.5 ng/mL for plasma PCT was 100 % sensitive and 80 % specific and a cut off value of >18 mg/dL for CRP was 86 % sensitive and 63 % specific for predicting antibiotic requirement. Plasma procalcitonin is an early and reliable prognostic indicator in acute pancreatitis. The procalcitonin strip test is a rapid test which is useful in analyzing prognosis in patients with acute pancreatitis. PMID:27011501

  4. Tracing ram-pressure stripping with warm molecular hydrogen emission

    SciTech Connect

    Sivanandam, Suresh; Rieke, Marcia J.; Rieke, George H.

    2014-12-01

    We use the Spitzer Infrared Spectrograph to study four infalling cluster galaxies with signatures of ongoing ram-pressure stripping. H{sub 2} emission is detected in all four, and two show extraplanar H{sub 2} emission. The emission usually has a warm (T ∼ 115-160 K) and a hot (T ∼ 400-600 K) component that is approximately two orders of magnitude less massive than the warm one. The warm component column densities are typically 10{sup 19} to 10{sup 20} cm{sup –2} with masses of 10{sup 6} to 10{sup 8} M {sub ☉}. The warm H{sub 2} is anomalously bright compared with normal star-forming galaxies and therefore may be excited by ram-pressure. In the case of CGCG 97-073, the H{sub 2} is offset from the majority of star formation along the direction of the galaxy's motion in the cluster, suggesting that it is forming in the ram-pressure wake of the galaxy. Another galaxy, NGC 4522, exhibits a warm H{sub 2} tail approximately 4 kpc in length. These results support the hypothesis that H{sub 2} within these galaxies is shock-heated from the interaction with the intracluster medium. Stripping of dust is also a common feature of the galaxies. For NGC 4522, where the distribution of dust at 8 μm is well resolved, knots and ripples demonstrate the turbulent nature of the stripping process. The Hα and 24 μm luminosities show that most of the galaxies have star-formation rates comparable to similar mass counterparts in the field. Finally, we suggest a possible evolutionary sequence primarily related to the strength of ram-pressure that a galaxy experiences to explain the varied results observed in our sample.

  5. Thickness and marking quality of different occlusal contact registration strips

    PubMed Central

    TOLEDO, Maria Fernanda de Souza Mauá Serapião; JÓIAS, Renata Pilli; MARQUES-IASI, Yves Santini; NEVES, Ana Christina Claro; RODE, Sigmar de Mello

    2014-01-01

    Objectives Evaluate the thickness and the marking quality of different occlusal contact registration strips (OCRS) and a possible correlation between them. Material and Methods The following OCRS were selected: Accufilm II, BK20, BK21, BK22, BK23, BK28, and BK31. The thickness was measured in three points of the OCRS with an electronic measuring device (TESA), and the mean was calculated. To produce the marks on the strips, composite resin specimens were adapted to a universal testing machine (Versat 2000) with 40 kgf load cell at a speed of 1.0 mm/min. The mark images were photographed with a stereoscopic microscope (Stemi SV11) and processed and analyzed by the 550-Leica Qwin® analyzer. Results Values (μm) found in the 1st and 2nd thickness measurements were: Accufilm II - 16.4 and 14.2; BK20 - 10.0 and 8.1; BK21 - 9.5 and 8.0; BK22 - 9.7 and 8.7; BK23 - 9.8 and 7.9; BK28 - 12.8 and 10.0; and BK31 - 8.4 and 8.0, respectively. The mean (mm2) values found in the mark areas were: Accufilm II - 0.078; BK20 - 0.035; BK21 - 0.045; BK22 - 0.012; BK23 - 0.022; BK28 - 0.024; and BK31 - 0.024. The results were submitted to the Kruskal-Wallis (p<0.05) and Pearson’s correlation tests. Conclusions Only in the 2nd measurement, the OCRS thickness observed was similar to the value indicated by the manufacturers; the Accufilm II and the BK28 strips showed the better marks; and no correlation was found between the thickness and the marking area. PMID:25591020

  6. Procalcitonin Strip Test as an Independent Predictor in Acute Pancreatitis.

    PubMed

    Dias, Brendan Hermenigildo; Rozario, Anthony Prakash; Olakkengil, Santosh Antony; V, Anirudh

    2015-12-01

    Plasma procalcitonin (PCT) is a highly specific marker for the diagnosis of bacterial infection and sepsis. Studies have demonstrated its role in the setting of sepsis and acute pancreatitis. This study aims to analyze and compare the prognostic efficacy of plasma procalcitonin strip test in acute pancreatitis. A prospective study was conducted in the department of general surgery from June 2012 to June 2013. Plasma procalcitonin was estimated by the semiquantitative strip test. The study included a total of 50 patients diagnosed to have acute pancreatitis. Data was collected and statistically analyzed using SPSS version 17. Thirty-nine out of the 50 patients (78 %) were males with a mean age of 46.8 years (range, 25-78 years) and 25 patients (50 %) had ethanol-induced pancreatitis, while 13 patients (26 %) had gall stone pancreatitis. Plasma PCT values were found to correlate better than CRP levels and total leukocyte count with the total duration of hospitalization, ITU, and ICU stay, as well as with the progression to severe acute pancreatitis. A cut off for plasma PCT of >2 ng/mL was found to be 100 % sensitive and 100 % specific and a cut off for CRP of >19 mg/dL was 70 % sensitive and 65 % specific for predicting the progression to severe acute pancreatitis. Plasma PCT also correlated well with antibiotic requirement. A cut off value of >0.5 ng/mL for plasma PCT was 100 % sensitive and 80 % specific and a cut off value of >18 mg/dL for CRP was 86 % sensitive and 63 % specific for predicting antibiotic requirement. Plasma procalcitonin is an early and reliable prognostic indicator in acute pancreatitis. The procalcitonin strip test is a rapid test which is useful in analyzing prognosis in patients with acute pancreatitis.

  7. Processing of data from innovative parabolic strip telescope.

    NASA Astrophysics Data System (ADS)

    Kosejk, Vladislav; Novy, J.; Chadzitaskos, Goce

    2015-12-01

    This paper presents an innovative telescope design based on the usage of a parabolic strip fulfilling the function of an objective. Isaac Newton was the first to solve the problem of chromatic aberration, which is caused by a difference in the refractive index of lenses. This problem was solved by a new kind of telescope with a mirror used as an objective. There are many different kinds of telescopes. The most basic one is the lens telescope. This type of a telescope uses a set of lenses. Another type is the mirror telescope, which employs the concave mirror, spherical parabolic mirror or hyperbolically shaped mirror as its objective. The lens speed depends directly on the surface of a mirror. Both types can be combined to form a telescope composed of at least two mirrors and a set of lenses. The light is reflected from the primary mirror to the secondary one and then to the lens system. This type is smaller-sized, with a respectively reduced lens speed. The telescope design presented in this paper uses a parabolic strip fulfilling the function of an objective. Observed objects are projected as lines in a picture plane. Each of the lines of a size equal to the size of the strip corresponds to the sum of intensities of the light coming perpendicular to the objective from an observed object. A series of pictures taken with a different rotation and processed by a special reconstruction algorithm is needed to get 2D pictures. The telescope can also be used for fast detection of objects. In this mode, the rotation and multiple pictures are not needed, just one picture in the focus of a mirror is required to be taken.

  8. VizieR Online Data Catalog: z~4-7 Lyman break galaxies in Hubble deep fields (Harikane+, 2016)

    NASA Astrophysics Data System (ADS)

    Harikane, Y.; Ouchi, M.; Ono, Y.; More, S.; Saito, S.; Lin, Y.-T.; Coupon, J.; Shimasaku, K.; Shibuya, T.; Price, P. A.; Lin, L.; Hsieh, B.-C.; Ishigaki, M.; Komiyama, Y.; Silverman, J.; Takata, T.; Tamazawa, H.; Toshikawa, J.

    2016-07-01

    We use 10 deep optical-near-IR imaging data sets of the Hubble Ultra Deep Field (HUDF), Great Observatories Origins Deep Survey (GOODS)-North-Deep, GOODS-North-Wide, GOODS-South-Deep, GOODS-South-Wide, Cosmic Assembly Near-infrared Deep Extragalactic Legacy Survey (CANDELS)-All-Wavelength Extended Groth Strip International Survey (AEGIS), CANDELS-Cosmological Evolution Survey (COSMOS), CANDELS-Ultra Deep Survey (UDS), Hubble Frontier Field (HFF)-Abell2744P, and HFF-MACS0416P that are taken with ACS and WFC3 on the HST. The total area of the Hubble data is ~600arcmin2. The typical FWHMs of the PSFs of ACS and WFC3 images are 0.1" and 0.2", respectively. (1 data file).

  9. Nonradial instability strips for post-AGB stars

    SciTech Connect

    Stanghellini, L. ); Cox, A.N. ); Starrfield, S.G. . Dept. of Physics and Astronomy Los Alamos National Lab., NM )

    1990-01-01

    We test several pre-degenerate (PNN and DO) and degenerate (DB) models for stability against nonradial oscillations. These models lie on the 0.6 M{sub {circle dot}} evolutionary track calculated by Iben. The post-AGB stars have a residual CO core with only a little surface hydrogen and helium. In order to match all the observed pulsators. We use three different surface compositions for the DO stars, and a pure helium surface for the DB white dwarfs. We find 3 DO and 1 DB instability strips that we compare to the available observations. 16 refs., 1 fig.

  10. Development of a single wheel, high speed aluminum strip caster

    SciTech Connect

    Ray, L.D.; Sloan, G.A.

    1996-10-01

    The aluminum industry has been in search of a viable continuous casting process for many years. Such a process would provide an increase in production as well as lower production costs. The melt drag process is capable of producing thin aluminum sheet at extremely high casting rates. Over the past ten years, many milestones have been reached in making this process acceptable for use in production. Some of these accomplishments are reviewed in this paper along with a general overview of some of the technical aspects of melt drag casting. In addition, a comparison is made with other processes available for continuously casting aluminum slab and strip.

  11. Simulations of in situ air stripping demonstration at Savannah River

    SciTech Connect

    Robinson, B.A.; Rosenberg, N.D.; Zyvoloski, G.A.; Viswanathan, H.

    1994-06-01

    This report assesses the performance of the in situ air stripping technology demonstrated at the Savannah River Integrated Demonstration (SRID) site. This technology is a combination of air injection below the water table and vacuum extraction in the vadose zone, using a pair of horizontal wells. Our approach is based on the construction of a site-specific numerical model using the FEHM flow and transport code. We use the model as a tool to investigate improvements to performance, to improve the prediction of the performance of this technology over longer periods of time and at different sites, and to compare performance with other remediation technologies.

  12. Dynamic Underground Stripping Post-Treatment Characterization Plan

    SciTech Connect

    Vangelas, K.M.

    2001-04-17

    The A/M-Area of the Savannah River Site is a known area of solvent release to the subsurface. The Solvent Storage Tank Area is an area of documented dense non-aqueous phase liquids (DNAPL) in the subsurface. June 30, 2000 a remediation using the Dynamic Underground Stripping (DUS) treatment technology commenced. This technology injects steam into the subsurface through a series of injection wells located within the treatment zone. The steam is pulled through the subsurface to an extraction well where it is removed. The heating of the subsurface causes the DNAPL present to be volatilized and removed through the extraction well.

  13. Container lid gasket protective strip for double door transfer system

    DOEpatents

    Allen, Jr., Burgess M

    2013-02-19

    An apparatus and a process for forming a protective barrier seal along a "ring of concern" of a transfer container used with double door systems is provided. A protective substrate is supplied between a "ring of concern" and a safety cover in which an adhesive layer of the substrate engages the "ring of concern". A compressive foam strip along an opposite side of the substrate engages a safety cover such that a compressive force is maintained between the "ring of concern" and the adhesive layer of the substrate.

  14. Furfural production by 'acidic steam stripping' of lignocellulose.

    PubMed

    van Buijtenen, Jeroen; Lange, Jean-Paul; Espinosa Alonso, Leticia; Spiering, Wouter; Polmans, Rob F; Haan, Rene J

    2013-11-01

    Furfural and acetic acid are produced with approximately 60 and 90 mol % yield, respectively, upon stripping bagasse with a gaseous stream of HCl/steam and condensing the effluent to water/furfural/acetic acid. The reaction kinetics is 1(st)  order in furfural and 0.5(th)  order in HCl. A process concept with full recycling of the reaction effluents is proposed to reduce the energy demand to <10 tonsteam  tonfurfural (-1) and facilitate the product recovery through a simple liquid/liquid separation of the condensate into a water-rich and a furfural-rich phase.

  15. Solar array strip and a method for forming the same

    NASA Technical Reports Server (NTRS)

    Mueller, R. L.; Yasui, R. K. (Inventor)

    1979-01-01

    A flexible solar array strip is formed by providing printed circuitry between flexible layers of a nonconductive material, depositing solder pads on the printed circuitry, and storing the resulting substrate on a drum from which it is then withdrawn and advanced along a linear path. Solderless solar cells are serially transported into engagement with the pads and are infrared radiation to melt the solder and attach the cells to the circuitry. Excess flux is cleaned from the solar cells which are then encapsulated in a protective coating. The resulting array is then wound on a drum.

  16. Beam tests of ATLAS SCT silicon strip detector modules

    SciTech Connect

    Campabadal, F.; Fleta, C.; Key, M.; Lozano, M.; Martinez, C.; Pellegrini, G.; Rafi, J.M.; Ullan, M.; Johansen, L.; Pommeresche, B.; Stugu, B.; Ciocio, A.; Fadeyev, V.; Gilchriese, M.; Haber, C.; Siegrist,J.; Spieler, H.; Vu, C.; Bell, P.J.; Charlton, D.G.; Dowell, J.D.; Gallop, B.J.; Homer, R.J.; Jovanovic, P.; Mahout, G.; McMahon, T.J.; Wilson, J.A.; Barr, A.J.; Carter, J.R.; Fromant, B.P.; Goodrick, M.J.; Hill, J.C.; Lester, C.G.; Palmer, M.J.; Parker, M.A.; Robinson, D.; Sabetfakhri, A.; Shaw, R.J.; Anghinolfi, F.; Chesi, E.; Chouridou, S.; Fortin, R.; Grosse-Knetter, M.; Gruwe, M.; Ferrari, P.; Jarron, P.; Kaplon, J.; Macpherson, A.; Niinikoski, T.; Pernegger, H.; Roe, S.; Rudge, A.; Ruggiero, G.; Wallny, R.; Weilhammer, P.; Bialas, W.; Dabrowski, W.; Grybos, P.; Koperny, S.; Blocki, J.; Bruckman, P.; Gadomski, S.; Godlewski, J.; Gornicki, E.; Malecki, P.; Moszczynski, A.; Stanecka, E.; Stodulski, M.; Szczygiel, R.; Turala, M.; Wolter, M.; Ahmad, A.; Benes, J.; Carpentieri, C.; Feld, L.; Ketterer, C.; Ludwig,J.; Meinhardt, J.; Runge, K.; Mikulec, B.; Mangin-Brinet, M.; D'Onofrio,M.; Donega, M.; Moed, S.; Sfyrla, A.; Ferrere, D.; Clark, A.G.; Perrin,E.; Weber, M.; Bates, R.L.; Cheplakov, A.; Saxon, D.H.; O'Shea, V.; Smith, K.M.; Iwata, Y.; Ohsugi, T.; Kohriki, T.; Kondo, T.; Terada, S.; Ujiie, N.; Ikegami, Y.; Unno, Y.; Takashima, R.; Brodbeck, T.; Chilingarov, A.; Hughes, G.; Ratoff, P.; Sloan, T.; Allport, P.P.; Casse,G.-L.; Greenall, A.; Jackson, J.N.; Jones, T.J.; King, B.T.; Maxfield,S.J.; Smith, N.A.; Sutcliffe, P.; Vossebeld, J.; Beck, G.A.; Carter,A.A.; Lloyd, S.L.; Martin, A.J.; Morris, J.; Morin, J.; Nagai, K.; Pritchard, T.W.; Anderson, B.E.; Butterworth, J.M.; Fraser, T.J.; Jones,T.W.; Lane, J.B.; Postranecky, M.; Warren, M.R.M.; Cindro, V.; Kramberger, G.; Mandic, I.; Mikuz, M.; Duerdoth, I.P.; Freestone, J.; Foster, J.M.; Ibbotson, M.; Loebinger, F.K.; Pater, J.; Snow, S.W.; Thompson, R.J.; Atkinson, T.M.; et al.

    2004-08-18

    The design and technology of the silicon strip detector modules for the Semiconductor Tracker (SCT) of the ATLAS experiment have been finalized in the last several years. Integral to this process has been the measurement and verification of the tracking performance of the different module types in test beams at the CERN SPS and the KEK PS. Tests have been performed to explore the module performance under various operating conditions including detector bias voltage, magnetic field, incidence angle, and state of irradiation up to 3 1014 protons per square centimeter. A particular emphasis has been the understanding of the operational consequences of the binary readout scheme.

  17. Numerical simulation of internal waves past a horizontal strip

    NASA Astrophysics Data System (ADS)

    Riahi Khalloufi, Mahmoud; Houcine, Hatem; Fraunié, Philippe; Chashechkin, Yuli; Redondo, Jose Manuel; Gharvi, Adel

    2016-04-01

    A numerical model for stratified flows has been developed and validated from laboratory experiments performed in a salty water channel at low Reynolds number, exhibiting reasonable agreement with data of Schlieren visualization, density marker and probe measurements of internal wave fields. In continuation to previous work concerning a vertical strip towed in a channel, new numerical results are presented for the more delicate case of horizontal plate. These results are discussed concerning theoretical approaches including singular components and observations in atmosphere and ocean. Acknowledgements : This research was supported by the Modtercom project of Region PACA, and the Laboratoire Mixte International COSYS-MED.

  18. Laser stripping of hydrogen atoms by direct ionization

    DOE PAGESBeta

    Brunetti, E.; Becker, W.; Bryant, H. C.; Jaroszynski, D. A.; Chou, W.

    2015-05-08

    Direct ionization of hydrogen atoms by laser irradiation is investigated as a potential new scheme to generate proton beams without stripping foils. The time-dependent Schrödinger equation describing the atom-radiation interaction is numerically solved obtaining accurate ionization cross-sections for a broad range of laser wavelengths, durations and energies. Parameters are identified where the Doppler frequency up-shift of radiation colliding with relativistic particles can lead to efficient ionization over large volumes and broad bandwidths using currently available lasers.

  19. Compressible Strips, Chiral Luttinger Liquids, and All That Jazz

    NASA Astrophysics Data System (ADS)

    MacDonald, A. H.

    1996-03-01

    When the quantum Hall effect occurs in a two-dimensional electron gas, all low-energy elementary excitations are localized near the system edge. The edge acts in many ways like a one-dimensional ring of electrons, except that a finite current flows around the ring in equilibrium. This article is a brief and informal review of some of the physics of quantum Hall system edges. We discuss the implications of macroscopic {\\em compressible strip} models for microscopic {chiral Luttinger liquid} models and make an important distinction between the origin of non-Fermi-liquid behavior in fractional quantum Hall edges and in usual one-dimensional electron gas systems.

  20. A silicon strip detector dose magnifying glass for IMRT dosimetry

    SciTech Connect

    Wong, J. H. D.; Carolan, M.; Lerch, M. L. F.; Petasecca, M.; Khanna, S.; Perevertaylo, V. L.; Metcalfe, P.; Rosenfeld, A. B.

    2010-02-15

    Purpose: Intensity modulated radiation therapy (IMRT) allows the delivery of escalated radiation dose to tumor while sparing adjacent critical organs. In doing so, IMRT plans tend to incorporate steep dose gradients at interfaces between the target and the organs at risk. Current quality assurance (QA) verification tools such as 2D diode arrays, are limited by their spatial resolution and conventional films are nonreal time. In this article, the authors describe a novel silicon strip detector (CMRP DMG) of high spatial resolution (200 {mu}m) suitable for measuring the high dose gradients in an IMRT delivery. Methods: A full characterization of the detector was performed, including dose per pulse effect, percent depth dose comparison with Farmer ion chamber measurements, stem effect, dose linearity, uniformity, energy response, angular response, and penumbra measurements. They also present the application of the CMRP DMG in the dosimetric verification of a clinical IMRT plan. Results: The detector response changed by 23% for a 390-fold change in the dose per pulse. A correction function is derived to correct for this effect. The strip detector depth dose curve agrees with the Farmer ion chamber within 0.8%. The stem effect was negligible (0.2%). The dose linearity was excellent for the dose range of 3-300 cGy. A uniformity correction method is described to correct for variations in the individual detector pixel responses. The detector showed an over-response relative to tissue dose at lower photon energies with the maximum dose response at 75 kVp nominal photon energy. Penumbra studies using a Varian Clinac 21EX at 1.5 and 10.0 cm depths were measured to be 2.77 and 3.94 mm for the secondary collimators, 3.52 and 5.60 mm for the multileaf collimator rounded leaf ends, respectively. Point doses measured with the strip detector were compared to doses measured with EBT film and doses predicted by the Philips Pinnacle treatment planning system. The differences were 1

  1. Screws, Propellers and Fans Based on a Mobius Strip

    NASA Technical Reports Server (NTRS)

    Seiner, John M.; Backley, Floyd D.; Gilinsky, Mikhail

    1998-01-01

    A Mobius strip concept is intended for improving the working efficiency of propellers and screws. Applications involve cooling, boat propellers, mixing in appliance, blenders, and helicopters. Several Mobius shaped screws for the average size kitchen mixers have been made and tested. The tests have shown that the mixer with the Mobius shaped screw pair is most efficient, and saves more than 30% of the electric power by comparison with the standard. The created video film about these tests illustrates efficiency of Mobius shaped screws.

  2. Optimization of Single-Sided Charge-Sharing Strip Detectors

    NASA Technical Reports Server (NTRS)

    Hamel, L.A.; Benoit, M.; Donmez, B.; Macri, J. R.; McConnell, M. L.; Ryan, J. M.; Narita, T.

    2006-01-01

    Simulation of the charge sharing properties of single-sided CZT strip detectors with small anode pads are presented. The effect of initial event size, carrier repulsion, diffusion, drift, trapping and detrapping are considered. These simulations indicate that such a detector with a 150 m pitch will provide good charge sharing between neighboring pads. This is supported by a comparison of simulations and measurements for a similar detector with a coarser pitch of 225 m that could not provide sufficient sharing. The performance of such a detector used as a gamma-ray imager is discussed.

  3. Water treatment: Air stripping. (Latest citations from the Selected Water Resources Abstracts database). Published Search

    SciTech Connect

    Not Available

    1993-07-01

    The bibliography contains citations concerning the use of air stripping techniques for wastewater, groundwater, and soil decontamination. The advantages and disadvantages of air stripping over other water treatment processes are discussed. The cleanup of organic emissions generated by air stripping is also considered. Other water treatment processes are discussed in separate bibliographies. (Contains a minimum of 212 citations and includes a subject term index and title list.)

  4. Water treatment: Air stripping. (Latest citations from the Selected Water Resources Abstracts database). Published Search

    SciTech Connect

    Not Available

    1993-11-01

    The bibliography contains citations concerning the use of air stripping techniques for wastewater, groundwater, and soil decontamination. The advantages and disadvantages of air stripping over other water treatment processes are discussed. The cleanup of organic emissions generated by air stripping is also considered. Other water treatment processes are discussed in separate bibliographies. (Contains a minimum of 225 citations and includes a subject term index and title list.)

  5. Water treatment: Air stripping. (Latest citations from the Selected Water Resources Abstracts data base). Published Search

    SciTech Connect

    Not Available

    1992-04-01

    The bibliography contains citations concerning the use of air stripping techniques for wastewater, groundwater, and soil decontamination. The advantages and disadvantages of air stripping over other water treatment processes are discussed. The cleanup of organic emissions generated by air stripping is also considered. Other water treatment processes are discussed in separate bibliographies. (Contains a minimum of 129 citations and includes a subject term index and title list.)

  6. Cryogenic fractionator gas as stripping gas of fines slurry in a coking and gasification process

    DOEpatents

    DeGeorge, Charles W.

    1981-01-01

    In an integrated coking and gasification process wherein a stream of fluidized solids is passed from a fluidized bed coking zone to a second fluidized bed and wherein entrained solid fines are recovered by a scrubbing process and wherein the resulting solids-liquid slurry is stripped with a stripping gas to remove acidic gases, at least a portion of the stripping gas comprises a gas comprising hydrogen, nitrogen and methane separated from the coker products.

  7. Generalized thick strip modelling for vortex-induced vibration of long flexible cylinders

    NASA Astrophysics Data System (ADS)

    Bao, Y.; Palacios, R.; Graham, M.; Sherwin, S.

    2016-09-01

    We propose a generalized strip modelling method that is computationally efficient for the VIV prediction of long flexible cylinders in three-dimensional incompressible flow. In order to overcome the shortcomings of conventional strip-theory-based 2D models, the fluid domain is divided into "thick" strips, which are sufficiently thick to locally resolve the small scale turbulence effects and three dimensionality of the flow around the cylinder. An attractive feature of the model is that we independently construct a three-dimensional scale resolving model for individual strips, which have local spanwise scale along the cylinder's axial direction and are only coupled through the structural model of the cylinder. Therefore, this approach is able to cover the full spectrum for fully resolved 3D modelling to 2D strip theory. The connection between these strips is achieved through the calculation of a tensioned beam equation, which is used to represent the dynamics of the flexible body. In the limit, however, a single "thick" strip would fill the full 3D domain. A parallel Fourier spectral/hp element method is employed to solve the 3D flow dynamics in the strip-domain, and then the VIV response prediction is achieved through the strip-structure interactions. Numerical tests on both laminar and turbulent flows as well as the comparison against the fully resolved DNS are presented to demonstrate the applicability of this approach.

  8. Spatially distinct responses within willow to bark stripping by deer: effects on insect herbivory

    NASA Astrophysics Data System (ADS)

    Tanaka, Motonobu; Nakamura, Masahiro

    2015-10-01

    Within individual plants, cervid herbivory may cause positive or negative plant-mediated effects on insect herbivores, depending on where it occurs. Using a combination of field observations and artificial bark-stripping experiments in Hokkaido, Japan, we examined the plant-mediated effects of bark stripping by sika deer ( Cervus nippon yesoensis) on insect herbivory in two spatially distinct parts of willow ( Salix udensis) trees: resprouting leaves below bark-stripping wounds and canopy leaves above. Natural and artificial bark stripping stimulated resprouting from trunks below wounds. Resprouting leaves on bark-stripped trees had lower total phenolics, condensed tannin, and C/N ratios than did canopy leaves on control trees. Herbivory rates were higher in resprouting leaves on bark-stripped trees than in canopy leaves on controls. Conversely, above-wound canopy leaves on bark-stripped trees had higher total phenolics than did those on controls, while herbivory rates were lower in the canopy leaves of bark-stripped trees than in those on controls. These results demonstrate that plant-mediated effects of bark stripping diverge between plant tissues below and above wounds in individual willow trees. We submit that focusing on multiple plant parts can elucidate plant-mediated effects at the whole-plant scale.

  9. Spatially distinct responses within willow to bark stripping by deer: effects on insect herbivory.

    PubMed

    Tanaka, Motonobu; Nakamura, Masahiro

    2015-10-01

    Within individual plants, cervid herbivory may cause positive or negative plant-mediated effects on insect herbivores, depending on where it occurs. Using a combination of field observations and artificial bark-stripping experiments in Hokkaido, Japan, we examined the plant-mediated effects of bark stripping by sika deer (Cervus nippon yesoensis) on insect herbivory in two spatially distinct parts of willow (Salix udensis) trees: resprouting leaves below bark-stripping wounds and canopy leaves above. Natural and artificial bark stripping stimulated resprouting from trunks below wounds. Resprouting leaves on bark-stripped trees had lower total phenolics, condensed tannin, and C/N ratios than did canopy leaves on control trees. Herbivory rates were higher in resprouting leaves on bark-stripped trees than in canopy leaves on controls. Conversely, above-wound canopy leaves on bark-stripped trees had higher total phenolics than did those on controls, while herbivory rates were lower in the canopy leaves of bark-stripped trees than in those on controls. These results demonstrate that plant-mediated effects of bark stripping diverge between plant tissues below and above wounds in individual willow trees. We submit that focusing on multiple plant parts can elucidate plant-mediated effects at the whole-plant scale.

  10. Prigogine Theorem for the Process of Rolling of a Viscoplastic Strip

    NASA Astrophysics Data System (ADS)

    Solovei, V. D.

    2015-05-01

    Consideration is given to slow plane isothermal fl ow of a viscoplastic strip in rolling. Tangential stresses are assigned at the boundary of contact of the strip with the roll and at the boundaries between the fl ow region and the back and head rigid ends of the strip. A definition is provided for possible perturbations of the velocities of travel for special stationary flows of a viscoplastic strip in rolling. Minimum entropy production is proved for special stationary flows with respect to possible perturbations of velocities of travel (Prigogine theorem).

  11. Integration of stripping of fines slurry in a coking and gasification process

    DOEpatents

    DeGeorge, Charles W.

    1980-01-01

    In an integrated fluid coking and gasification process wherein a stream of fluidized solids is passed from a fluidized bed coking zone to a second fluidized bed and wherein entrained solid fines are recovered by a wet scrubbing process and wherein the resulting solids-liquid slurry is stripped to remove acidic gases, the stripped vapors of the stripping zone are sent to the gas cleanup stage of the gasification product gas. The improved stripping integration is particularly useful in the combination coal liquefaction process, fluid coking of bottoms of the coal liquefaction zone and gasification of the product coke.

  12. Spatially distinct responses within willow to bark stripping by deer: effects on insect herbivory.

    PubMed

    Tanaka, Motonobu; Nakamura, Masahiro

    2015-10-01

    Within individual plants, cervid herbivory may cause positive or negative plant-mediated effects on insect herbivores, depending on where it occurs. Using a combination of field observations and artificial bark-stripping experiments in Hokkaido, Japan, we examined the plant-mediated effects of bark stripping by sika deer (Cervus nippon yesoensis) on insect herbivory in two spatially distinct parts of willow (Salix udensis) trees: resprouting leaves below bark-stripping wounds and canopy leaves above. Natural and artificial bark stripping stimulated resprouting from trunks below wounds. Resprouting leaves on bark-stripped trees had lower total phenolics, condensed tannin, and C/N ratios than did canopy leaves on control trees. Herbivory rates were higher in resprouting leaves on bark-stripped trees than in canopy leaves on controls. Conversely, above-wound canopy leaves on bark-stripped trees had higher total phenolics than did those on controls, while herbivory rates were lower in the canopy leaves of bark-stripped trees than in those on controls. These results demonstrate that plant-mediated effects of bark stripping diverge between plant tissues below and above wounds in individual willow trees. We submit that focusing on multiple plant parts can elucidate plant-mediated effects at the whole-plant scale. PMID:26253347

  13. Reductive stripping process for the recovery of uranium from wet-process phosphoric acid

    DOEpatents

    Hurst, Fred J.; Crouse, David J.

    1984-01-01

    A reductive stripping flow sheet for recovery of uranium from wet-process phosphoric acid is described. Uranium is stripped from a uranium-loaded organic phase by a redox reaction converting the uranyl to uranous ion. The uranous ion is reoxidized to the uranyl oxidation state to form an aqueous feed solution highly concentrated in uranium. Processing of this feed through a second solvent extraction cycle requires far less stripping reagent as compared to a flow sheet which does not include the reductive stripping reaction.

  14. Survey Says

    ERIC Educational Resources Information Center

    McCarthy, Susan K.

    2005-01-01

    Survey Says is a lesson plan designed to teach college students how to access Internet resources for valid data related to the sexual health of young people. Discussion questions based on the most recent available data from two national surveys, the Youth Risk Behavior Surveillance-United States, 2003 (CDC, 2004) and the National Survey of…

  15. Thermal cleanups using dynamic underground stripping and hydrous pyrolysis oxidation

    SciTech Connect

    Aines, R D; Knauss, K; Leif, R; Newmark, R L

    1999-05-01

    In the early 1990s, in collaboration with the School of Engineering at the University of California, Berkeley, Lawrence Livermore National Laboratory developed dynamic underground stripping (DUS), a method for treating subsurface contaminants with heat that is much faster and more effective than traditional treatment methods. more recently, Livermore scientists developed hydrous pyrolysis/oxidation (HPO), which introduces both heat and oxygen to the subsurface to convert contaminants in the ground to such benign products as carbon dioxide, chloride ion, and water. This process has effectively destroyed all contaminants it encountered in laboratory tests. With dynamic underground stripping, the contaminants are vaporized and vacuumed out of the ground, leaving them still to be destroyed elsewhere. Hydrous pyrolysis/oxidation technology takes the cleanup process one step further by eliminating the treatment, handling, and disposal requirements and destroying the contamination in the ground. When used in combination, HPO is especially useful in the final polishing of a site containing significant free-product contaminant, once the majority of the contaminant has been removed.

  16. Evaluating grass strips trapping efficiency of sediments and herbicides

    NASA Astrophysics Data System (ADS)

    Burguet, Maria; Guzmán, Gema; de Luna, Elena; Taguas, Encarnación V.; Gómez, José Alfonso

    2016-04-01

    Water erosion and associated offsite contamination are major environmental risks in many Mediterranean crops such as olives or vineyards (Beaufoy, 2001; Gómez et al., 2011). The use of cover crops has been prescribed as a mitigation measure for both problems because permanent cover crops have demonstrated to reduce sediment and agrochemical loads (e.g. Gómez, 2009a, b). However, large uncertainty remains about its effectiveness degree to reduce sediment and agrochemical contribution to streams due to the limited number of available studies, and the large variability observed under field conditions (Taguas et al., 2012). Furthermore, the determination of sediment and herbicide sources using suitable sediment tracing/fingerprinting properties has been noted as one tool to evaluate the effectiveness and functioning of vegetated filters at the catchment scale (Koiter et al., 2013). The objectives of the present study were twofold: [1] to explore the combined use of natural and simulated rainfall and magnetic iron oxide in understanding the performance of vegetation strips on runoff and soil and herbicide losses at plot scale and, [2] to evaluate the effectiveness degree of vegetation strips in buffering sediment and herbicide from bare soil areas under different conditions compared to a control situation with no strips. This study encompasses six rainfall simulations under four different soil managements combining the use of a magnetic iron oxide as a sediment tracer to obtain a better understanding of the vegetation strips trapping efficiency. Three runoff plots of 6 m × 14 m were established in a 20% hillslope under a Fluvisol alluvial terrace. Each of the plots contained three bare strips tagged with magnetic iron oxide and three strips with Lolium multiflorum L. The soil management simulated scenarios were: immediately after sowing the vegetation cover (June 2011cover crop), with settled vegetation cover (June 2012cover crop), after 5 cm of deep ploughing

  17. Crack propagation in functionally graded strip under thermal shock

    NASA Astrophysics Data System (ADS)

    Ivanov, I. V.; Sadowski, T.; Pietras, D.

    2013-09-01

    The thermal shock problem in a strip made of functionally graded composite with an interpenetrating network micro-structure of Al2O3 and Al is analysed numerically. The material considered here could be used in brake disks or cylinder liners. In both applications it is subjected to thermal shock. The description of the position-dependent properties of the considered functionally graded material are based on experimental data. Continuous functions were constructed for the Young's modulus, thermal expansion coefficient, thermal conductivity and thermal diffusivity and implemented as user-defined material properties in user-defined subroutines of the commercial finite element software ABAQUS™. The thermal stress and the residual stress of the manufacturing process distributions inside the strip are considered. The solution of the transient heat conduction problem for thermal shock is used for crack propagation simulation using the XFEM method. The crack length developed during the thermal shock is the criterion for crack resistance of the different graduation profiles as a step towards optimization of the composition gradient with respect to thermal shock sensitivity.

  18. Introducing absorptive stripping voltammetry: wide concentration range voltammetric phenol detection.

    PubMed

    Nissim, Rita; Compton, Richard G

    2014-11-21

    Carbon paste electrodes are developed for the detection of phenols via a procedure in which the phenols are allowed to accumulate in the paste via transfer from an aqueous solution prior to electro-oxidation. Importantly, the use of such paste electrodes is shown to substantially overcome the "self-passivating" behaviour of the phenol oxidation which usually constrains the electrode process to low concentrations and single-shot experiments. In this paper, 4-phenoxyphenol could be detected in the range from 2.5 to 40 μM, phenol from 2.5 μM to 60 mM and 4-methoxyphenol from 5.0 to 40 μM. The electrodes were re-usable without surface renewal for concentrations up to 1.0 mM. The use of a bulk phenol solution for pre-concentration via absorptive uptake into a bulk phase followed by electrochemical quantification represents a new form of electroanalysis, namely "absorptive stripping voltammetry" complementary to "adsorptive stripping voltammetry" where accumulation occurs via adsorption on an electrode surface.

  19. Lab experiments on the innovative rapid thick strip casting process

    NASA Astrophysics Data System (ADS)

    Nagy, Richard; Senk, Dieter

    2012-05-01

    Rapid thick strip casting (RTSC) by Anton Hulek, Inventmetall®, is an innovative concept for the production of hot strips with a final as-cast thickness of about 25 mm before rolling. The innovation of the mechanism consists in a vertical mould performing a caterpillar motion. This moving mould has an unconventional parallelogram-shaped cross-section. The conventional rectangular shape is formed in the shaping machine, which is placed straight below the mould. Further elements of the technology are state-of-the-art. For the investigation of this new casting system theoretical calculations were complemented with practical experiments. The investigation focused mainly on two key aspects: the characteristics of the mould and the shaping process. For the practical analysis a static mould with three pairs of elements in laboratory scale was developed and commissioned by the Dept. of Ferrous Metallurgy @ RWTH Aachen University. The shaping experiments were carried out in model scale with two different materials and in variable boundary conditions. The results of these experiments delivered important mechanical as well as thermal informations about the casting system.

  20. A skull stripping method using deformable surface and tissue classification

    NASA Astrophysics Data System (ADS)

    Tao, Xiaodong; Chang, Ming-Ching

    2010-03-01

    Many neuroimaging applications require an initial step of skull stripping to extract the cerebrum, cerebellum, and brain stem. We approach this problem by combining deformable surface models and a fuzzy tissue classification technique. Our assumption is that contrast exists between brain tissue (gray matter and white matter) and cerebrospinal fluid, which separates the brain from the extra-cranial tissue. We first analyze the intensity of the entire image to find an approximate centroid of the brain and initialize an ellipsoidal surface around it. We then perform a fuzzy tissue classification with bias field correction within the surface. Tissue classification and bias field are extrapolated to the entire image. The surface iteratively deforms under a force field computed from the tissue classification and the surface smoothness. Because of the bias field correction and tissue classification, the proposed algorithm depends less on particular imaging contrast and is robust to inhomogeneous intensity often observed in magnetic resonance images. We tested the algorithm on all T1 weighted images in the OASIS database, which includes skull stripping results using Brain Extraction Tool; the Dice scores have an average of 0.948 with a standard deviation of 0.017, indicating a high degree of agreement. The algorithm takes on average 2 minutes to run on a typical PC and produces a brain mask and membership functions for gray matter, white matter, and cerebrospinal fluid. We also tested the algorithm on T2 images to demonstrate its generality, where the same algorithm without parameter adjustment gives satisfactory results.

  1. Evaluating grass strips trapping efficiency of sediments and herbicides

    NASA Astrophysics Data System (ADS)

    Burguet, Maria; Guzmán, Gema; de Luna, Elena; Taguas, Encarnación V.; Gómez, José Alfonso

    2016-04-01

    Water erosion and associated offsite contamination are major environmental risks in many Mediterranean crops such as olives or vineyards (Beaufoy, 2001; Gómez et al., 2011). The use of cover crops has been prescribed as a mitigation measure for both problems because permanent cover crops have demonstrated to reduce sediment and agrochemical loads (e.g. Gómez, 2009a, b). However, large uncertainty remains about its effectiveness degree to reduce sediment and agrochemical contribution to streams due to the limited number of available studies, and the large variability observed under field conditions (Taguas et al., 2012). Furthermore, the determination of sediment and herbicide sources using suitable sediment tracing/fingerprinting properties has been noted as one tool to evaluate the effectiveness and functioning of vegetated filters at the catchment scale (Koiter et al., 2013). The objectives of the present study were twofold: [1] to explore the combined use of natural and simulated rainfall and magnetic iron oxide in understanding the performance of vegetation strips on runoff and soil and herbicide losses at plot scale and, [2] to evaluate the effectiveness degree of vegetation strips in buffering sediment and herbicide from bare soil areas under different conditions compared to a control situation with no strips. This study encompasses six rainfall simulations under four different soil managements combining the use of a magnetic iron oxide as a sediment tracer to obtain a better understanding of the vegetation strips trapping efficiency. Three runoff plots of 6 m × 14 m were established in a 20% hillslope under a Fluvisol alluvial terrace. Each of the plots contained three bare strips tagged with magnetic iron oxide and three strips with Lolium multiflorum L. The soil management simulated scenarios were: immediately after sowing the vegetation cover (June 2011cover crop), with settled vegetation cover (June 2012cover crop), after 5 cm of deep ploughing

  2. Multiplex Electrochemical Immunoassay Using Gold Nanoparticle Probes and Immunochromatographic Strips

    SciTech Connect

    Mao, Xun; Baloda, Meenu; Gurung, Anant; Lin, Yuehe; Liu, Guodong

    2008-10-20

    We describe a multiplex electrochemical immunoassay based on the use of gold nanoparticle (Au-NP) probes and immunochromatographic strips (ISs). The approach takes advantage of the speed and low cost of the conventional IS tests and the high sensitivities of the nanoparticle-based electrochemical immunoassays. Rabbit IgG(R-IgG) and human IgM (H-IgM) were used as model targets for the demonstration of the proof of concept. The Au-NPs based sandwich immunoreactions were performed on the IS, and the captured gold nanoparticle labels on the test zones were determined by highly-sensitive stripping voltammetric measurement of the dissolved gold ions (III) with a carbon paste electrode. The detection limits are 1.0 and 1.5 ng/mL with the linear ranges of 2.5-250 ng/mL for quantitative detection of R-IgG and H-IgM, respectively. The total assay time is around 25 minutes. Such multiplex electrochemical immunoassay could be readily highly multiplexed to allow simultaneous parallel detection of numerous proteins and is expected to open new opportunities for protein diagnostics and biosecurity.

  3. Arsenic speciation in natural waters by cathodic stripping voltammetry.

    PubMed

    Gibbon-Walsh, Kristoff; Salaün, Pascal; van den Berg, Constant M G

    2010-03-01

    Contamination of groundwater with arsenic (As) is a major health risk through contamination of drinking and irrigation water supplies. In geochemically reducing conditions As is mostly present as As(III), its most toxic species. Various methods exist to determine As in water but these are not suitable for monitoring arsenic speciation at its original pH and without preparation. We present a method that uses cathodic stripping voltammetry (CSV) to determine reactive As(III) at a vibrating, gold, microwire electrode. The As(III) is detected after adsorptive deposition of As(OH)(3)(0), followed by a potential scan to measure the reduction current from As(III) to As(0). The method is suitable for waters of pH 7-12, has an analytical range of 1 nM to 100 microM As (0.07-7500 ppb) and a limit of detection of 0.5 nM with a 60 s deposition time. The As speciation protocol involves measuring reactive As(III) by CSV at the original pH and acidification to pH 1 to determine inorganic As(III)+As(V) by anodic stripping voltammetry (ASV) using the same electrode. Total dissolved As is determined by ASV after UV-digestion at pH 1. The method was successfully tested on various raw groundwater samples from boreholes in the UK and West Bengal.

  4. CO2 relaxation of the rat lung parenchymal strip.

    PubMed

    Emery, Michael J; Eveland, Randy L; Min, Jin-Hye; Hildebrandt, Jacob; Swenson, Erik R

    2013-03-01

    Evidence from liquid-filled rat lungs supported the presence of CO2-dependent, active relaxation of parenchyma under normoxia by unknown mechanisms (Emery et al., 2007). This response may improve matching of alveolar ventilation (V˙A) to perfusion (Q˙) by increasing compliance and V˙A in overperfused (high CO2) regions, and decrease V˙A in underperfused regions. Here, we have more directly studied CO2-dependent parenchymal relaxation and tested a hypothesized role for actin-myosin interaction in this effect. Lung parenchymal strips (∼1.5mm×1.5mm×15mm) from 16 rats were alternately exposed to normoxic hypocapnia ( [Formula: see text] ) or hypercapnia ( [Formula: see text] ). Seven specimens were used to construct length-tension curves, and nine were tested with and without the myosin blocker 2,3-butanedione monoxime (BDM). The results demonstrate substantial, reversible CO2-dependent changes in parenchyma strip recoil (up to 23%) and BDM eliminates this effect, supporting a potentially important role for parenchymal myosin in V˙A/Q˙ matching. PMID:23305910

  5. Stripping lead from D2EHPA by direct displacement reactions

    SciTech Connect

    Chia, L.M.; O`Keefe, T.J.

    1995-07-01

    The direct removal of lead ions from D2EHPA-kerosene using metallic zinc as the reducing agent was evaluated. The electrochemical process, called galvanic stripping, is a potential alternative stripping technique when standard chemical methods are not adequate. Four parameters found to be important in the rate of lead removal were studied in a factorially designed experiment. The variable evaluated included D2EHPA concentration, temperature, zinc surface area and solution agitation. Temperature and surface area were found to be the most significant, while agitation and D2EHPA concentration had less influence on the reaction. An activation energy of 22.5 Kcal/mole was calculated indicating a chemically-controlled process. The reaction was also sensitive to the concentration of oxygen in the system. The zinc required was considerably in excess of stoichiometry, possibly due to the dissolution and redeposition of lead. In general, the results were encouraging and demonstrated that lead impurities could be removed from D2EHPA using cementation type reactions.

  6. Gold recovery from organic solvents using galvanic stripping

    SciTech Connect

    Flores, C.; O`Keefe, T.J.

    1995-08-01

    A novel process using solid metals for the direct reduction of more noble metal ions from solvent extraction organics has been developed. Base metals recovery has been the principal focus of investigations to date but feasibility tests have now also been made on galvanically stripping selected precious metals. In this study gold (III) was loaded from an aqueous HAuCl{sub 4}{center_dot}3H{sub 2}O solution into a mixed organic 40 vol.% TBP, 10 vol.% D2EHPA in kerosene. The direct precipitation of metallic gold from the loaded organic phase using zinc powder and iron, aluminum and copper slabs at 70 C was successfully demonstrated. The gold reduction rates were relatively fast even though the conductivity of the organic solutions is very low. The reaction rates were studied as a function of the variables zinc particulate size, oxygen and nitrogen atmosphere, water content in the organic phase, organic ratios and temperature. The gold morphology was usually powdery or dendritic in nature but continuous films were obtained in some instances. Activation energies were calculated and possible reaction mechanisms are discussed. In general, the results obtained were very promising and showed that gold can be successfully cemented from selected organic solvents by galvanic stripping using less noble solid metal reductants.

  7. The effect of cinnamon extract on isolated rat uterine strips.

    PubMed

    Alotaibi, Mohammed

    2016-03-01

    Cinnamon is a spice used by some populations as a traditional remedy to control blood pressure and thus hypertension. Cinnamon extract decreases contractility in some smooth muscles, but its effect on uterine smooth muscle is unknown. The aim of this study was to determine the physiological and pharmacological effects of cinnamon extract (CE) on the contractions of isolated rat uterine strips and to investigate its possible mechanism of action. Isolated longitudinal uterine strips were dissected from non-pregnant rats, mounted vertically in an organ bath chamber, and exposed to different concentrations of CE (10-20mg/mL). The effect of CE was investigated in the presence of each of the following solutions: 60mM KCl, 5nM oxytocin, and 1μM Bay K8644. CE significantly decreased the force of uterine contraction in a concentration-dependent manner and significantly attenuated the uterine contractions elicited by KCl and oxytocin. In addition, CE significantly decreased the contractile force elicited when L-type Ca(2+) channels were activated by Bay K8644. CE's major mechanism may be inhibition of L-type Ca(2+) channels, which limits calcium influx. These data demonstrate that CE can be a potent tocolytic that can decrease uterine activity regardless of how the force was produced, even when the uterus was stimulated by agonists. As a result, cinnamon may be used to alleviate menstrual pain associated with dysmenorrhoea or prevent unwanted uterine activity in early pregnancy. PMID:26952750

  8. Diffraction by a strip at almost grazing angle

    NASA Astrophysics Data System (ADS)

    Andronov, Ivan V.; Bouche, Daniel P.

    2016-07-01

    The problem of high-frequency diffraction by a soft strip at almost grazing incidence is considered. By using the parabolic equation method, and variable separation in elliptical coordinates, we derive the two terms asymptotic approximation of the solution. First we consider the boundary layer near the surface of the strip and derive an asymptotic representation for the velocities on the surface. Then we apply Green's formula to derive the asymptotic representation for the far field. Both asymptotic representations in the boundary layer and for the far field are expressed in the form of rapidly converging integrals containing Whittaker or Coulomb wave functions. The approximation for the total scattering cross-section is checked to match to known asymptotic results: the physical optics approximation for the not too small angles of incidence on one side and the asymptotic expression for the limiting case of grazing incidence on the other side. Simple approximations for the total scattering cross-section in powers of the scaled angle are derived.

  9. Skull-Stripping with Machine Learning Deformable Organisms

    PubMed Central

    Prasad, Gautam; Joshi, Anand A.; Feng, Albert; Toga, Arthur W.; Thompson, Paul M.; Terzopoulos, Demetri

    2014-01-01

    Background Segmentation methods for medical images may not generalize well to new data sets or new tasks, hampering their utility. We attempt to remedy these issues using deformable organisms to create an easily customizable segmentation plan. We validate our framework by creating a plan to locate the brain in 3D magnetic resonance images of the head (skull-stripping). New Method Our method borrows ideas from artificial life to govern a set of deformable models. We use control processes such as sensing, proactive planning, reactive behavior, and knowledge representation to segment an image. The image may have landmarks and features specific to that dataset; these may be easily incorporated into the plan. In addition, we use a machine learning method to make our segmentation more accurate. Results Our method had the least Hausdorff distance error, but included slightly less brain voxels (false negatives). It also had the lowest false positive error and performed on par to skull-stripping specific method on other metrics. Comparison with Existing Method(s) We tested our method on 838 T1-weighted images, evaluating results using distance and overlap error metrics based on expert gold standard segmentations. We evaluated the results before and after the learning step to quantify its benefit; we also compare our results to three other widely used methods: BSE, BET, and the Hybrid Watershed algorithm. Conclusions Our framework captures diverse categories of information needed for brain segmentation and will provide a foundation for tackling a wealth of segmentation problems. PMID:25124851

  10. DISPERSAL OF PROTOPLANETARY DISKS BY CENTRAL WIND STRIPPING

    SciTech Connect

    Matsuyama, I.; Johnstone, D.; Hollenbach, D.

    2009-07-20

    We present a model for the dispersal of protoplanetary disks by winds from either the central star or the inner disk. These winds obliquely strike the flaring disk surface and strip away disk material by entraining it in an outward radial-moving flow at the wind-disk interface, which lies several disk scale heights above the midplane. The disk dispersal time depends on the entrainment velocity, v{sub d} = {epsilon}c{sub s} , at which disk material flows into this turbulent shear layer interface, where {epsilon} is a scale factor and c{sub s} is the local sound speed in the disk surface just below the entrainment layer. If {epsilon} {approx} 0.1, a likely upper limit, the dispersal time at 1 AU is {approx}6 Myr for a disk with a surface density of 10{sup 3} g cm{sup -2}, a solar mass central star, and a wind with an outflow rate M-dot{sub w}=10{sup -8}M{sub odot}yr{sup -1} and terminal velocity v{sub w} = 200kms{sup -1}. When compared with photoevaporation and viscous evolution, wind stripping can be a dominant mechanism only for the combination of low accretion rates ({approx}<10{sup -8} M{sub sun} yr{sup -1}) and wind outflow rates approaching these accretion rates. This case is unusual since generally outflow rates are {approx}<0.1 of accretion rates.

  11. Theory Survey or Survey Theory?

    ERIC Educational Resources Information Center

    Dean, Jodi

    2010-01-01

    Matthew Moore's survey of political theorists in U.S. American colleges and universities is an impressive contribution to political science (Moore 2010). It is the first such survey of political theory as a subfield, the response rate is very high, and the answers to the survey questions provide new information about how political theorists look…

  12. Corn Response as Affected by Planting Distance from the Center of Strip-Till Fertilized Rows

    PubMed Central

    Adee, Eric; Hansel, Fernando D.; Ruiz Diaz, Dorivar A.; Janssen, Keith

    2016-01-01

    Strip-till has been used at a large scale in east central Kansas as an alternative to earlier planting dates under a no-till system. To determine the effects of planting corn (Zea mays) under previously established strip-tilled fertilized rows, experiments were conducted on an Osage silty clay loam soil in 2006 and 2008 and on a Woodson silt loam soil in 2009, 2010, and 2011 using three different planting distances from the strip-tilled fertilized rows (0, 10, 20, and 38 cm) with a strip-till operation performed between 1 and 73 days before planting. The depth of the strip-till fertilizer application was 13–15 cm below the soil surface. Corn that was planted 10 cm from the fertilized row showed greater early season growth, higher plant population, and grain yield. Planting 20 and 38 cm from the center of the fertilized rows showed none of the benefits that are typically associated with strip-tillage system. Enough time should be allowed between the strip-till operation and planting to reach satisfactory soil conditions (e.g., moist and firm seedbed). Our results suggest that the best location for planting strip-tilled fertilized corn vary depending on soil and climatic conditions as well as the time between fertilizer application with the strip-till operation and planting. With fewer number of days, planting directly on the center of fertilized strip-till resulted in decreased plant population and lower grain yield. However, the greatest yield benefit across different planting conditions was attained when planting within 10 cm of the strip. PMID:27588024

  13. Corn Response as Affected by Planting Distance from the Center of Strip-Till Fertilized Rows.

    PubMed

    Adee, Eric; Hansel, Fernando D; Ruiz Diaz, Dorivar A; Janssen, Keith

    2016-01-01

    Strip-till has been used at a large scale in east central Kansas as an alternative to earlier planting dates under a no-till system. To determine the effects of planting corn (Zea mays) under previously established strip-tilled fertilized rows, experiments were conducted on an Osage silty clay loam soil in 2006 and 2008 and on a Woodson silt loam soil in 2009, 2010, and 2011 using three different planting distances from the strip-tilled fertilized rows (0, 10, 20, and 38 cm) with a strip-till operation performed between 1 and 73 days before planting. The depth of the strip-till fertilizer application was 13-15 cm below the soil surface. Corn that was planted 10 cm from the fertilized row showed greater early season growth, higher plant population, and grain yield. Planting 20 and 38 cm from the center of the fertilized rows showed none of the benefits that are typically associated with strip-tillage system. Enough time should be allowed between the strip-till operation and planting to reach satisfactory soil conditions (e.g., moist and firm seedbed). Our results suggest that the best location for planting strip-tilled fertilized corn vary depending on soil and climatic conditions as well as the time between fertilizer application with the strip-till operation and planting. With fewer number of days, planting directly on the center of fertilized strip-till resulted in decreased plant population and lower grain yield. However, the greatest yield benefit across different planting conditions was attained when planting within 10 cm of the strip.

  14. Corn Response as Affected by Planting Distance from the Center of Strip-Till Fertilized Rows.

    PubMed

    Adee, Eric; Hansel, Fernando D; Ruiz Diaz, Dorivar A; Janssen, Keith

    2016-01-01

    Strip-till has been used at a large scale in east central Kansas as an alternative to earlier planting dates under a no-till system. To determine the effects of planting corn (Zea mays) under previously established strip-tilled fertilized rows, experiments were conducted on an Osage silty clay loam soil in 2006 and 2008 and on a Woodson silt loam soil in 2009, 2010, and 2011 using three different planting distances from the strip-tilled fertilized rows (0, 10, 20, and 38 cm) with a strip-till operation performed between 1 and 73 days before planting. The depth of the strip-till fertilizer application was 13-15 cm below the soil surface. Corn that was planted 10 cm from the fertilized row showed greater early season growth, higher plant population, and grain yield. Planting 20 and 38 cm from the center of the fertilized rows showed none of the benefits that are typically associated with strip-tillage system. Enough time should be allowed between the strip-till operation and planting to reach satisfactory soil conditions (e.g., moist and firm seedbed). Our results suggest that the best location for planting strip-tilled fertilized corn vary depending on soil and climatic conditions as well as the time between fertilizer application with the strip-till operation and planting. With fewer number of days, planting directly on the center of fertilized strip-till resulted in decreased plant population and lower grain yield. However, the greatest yield benefit across different planting conditions was attained when planting within 10 cm of the strip. PMID:27588024

  15. Anodic stripping voltammetry of gold nanoparticles at boron-doped diamond electrodes and its application in immunochromatographic strip tests.

    PubMed

    Ivandini, Tribidasari A; Wicaksono, Wiyogo P; Saepudin, Endang; Rismetov, Bakhadir; Einaga, Yasuaki

    2015-03-01

    Anodic stripping voltammetry (ASV) of colloidal gold-nanoparticles (AuNPs) was investigated at boron-doped diamond (BDD) electrodes in 50 mM HClO4. A deposition time of 300 s at-0.2 V (vs. Ag/AgCl) was fixed as the condition for the ASV. The voltammograms showed oxidation peaks that could be attributed to the oxidation of gold. These oxidation peaks were then investigated for potential application in immunochromatographic strip tests for the selective and quantitative detection of melamine, in which AuNPs were used as the label for the antibody of melamine. Linear regression of the oxidation peak currents appeared in the concentration range from 0.05-0.6 μg/mL melamine standard, with an estimated LOD of 0.069 μg/mL and an average relative standard deviation of 8.0%. This indicated that the method could be considered as an alternative method for selective and quantitative immunochromatographic applications. The validity was examined by the measurements of melamine injected into milk samples, which showed good recovery percentages during the measurements.

  16. Crosshole shear-wave seismic monitoring of an in situ air stripping waste remediation process

    SciTech Connect

    Elbring, G.J.

    1992-02-01

    Crosshole shear-wave seismic surveys have been used to monitor the distribution of injected air in the subsurface during an in situ air stripping waste remediation project at the Savannah River site in South Carolina. To remove the contaminant, in this case TCE's from a leaking sewer line, two horizontal wells were drilled at depths of 20 m and 52 m. Air was pumped into the lower well and a vacuum was applied to the upper well to extract the injected air. As the air passed through the subsurface, TCE's were dissolved into the gas and brought out the extraction well. Monitoring of the air injection by crosshole shear wave seismics is feasible due to the changes in soil saturation during injection resulting in a corresponding change in seismic velocities. Using a downhole shear-wave source and clamped downhole receiver, two sets of shear-wave data were taken. The first data were taken before the start of air injection, and the second taken during. The difference in travel times between the two data sets were tomographically inverted to obtain velocity differences. Velocity changes ranging up to 3% were mapped corresponding to saturation changes up to 24%. The distribution of these changes shows a desaturation around the position of the injection well with a plume extending in the direction of the extraction well. Layers with higher clay content show distinctively less change in saturation than the regions with higher sand content.

  17. Crosshole shear-wave seismic monitoring of an in situ air stripping waste remediation process

    SciTech Connect

    Elbring, G.J.

    1992-02-01

    Crosshole shear-wave seismic surveys have been used to monitor the distribution of injected air in the subsurface during an in situ air stripping waste remediation project at the Savannah River site in South Carolina. To remove the contaminant, in this case TCE`s from a leaking sewer line, two horizontal wells were drilled at depths of 20 m and 52 m. Air was pumped into the lower well and a vacuum was applied to the upper well to extract the injected air. As the air passed through the subsurface, TCE`s were dissolved into the gas and brought out the extraction well. Monitoring of the air injection by crosshole shear wave seismics is feasible due to the changes in soil saturation during injection resulting in a corresponding change in seismic velocities. Using a downhole shear-wave source and clamped downhole receiver, two sets of shear-wave data were taken. The first data were taken before the start of air injection, and the second taken during. The difference in travel times between the two data sets were tomographically inverted to obtain velocity differences. Velocity changes ranging up to 3% were mapped corresponding to saturation changes up to 24%. The distribution of these changes shows a desaturation around the position of the injection well with a plume extending in the direction of the extraction well. Layers with higher clay content show distinctively less change in saturation than the regions with higher sand content.

  18. Niche for steam stripping in treating dilute SOC-contaminated waters

    SciTech Connect

    Dvorak, B.I.; Lawler, D.F.; Speitel, G.E. Jr.

    1996-09-01

    As regulatory limits for contaminants in air and water become increasingly stringent, interest in steam stripping to remove synthetic organic compounds (SOCs) from industrial waters has increased. To identify situations in which steam stripping could be a cost-competitive option for treating waters contaminated with low concentrations (<10 mg/L) of synthetic organic chemicals, the performance and cost of steam-stripping towers were modeled, and a range of hypothetical contaminated waters was examined. The cost of steam stripping was compared to that of air stripping, liquid-phase carbon adsorption, and air stripping with off-gas adsorption. Steam stripping was found to be a highly specialized treatment technology that will not frequently be cost-effective, but it does have a small niche in the environmental remediation market. Steam stripping is cost-effective when site-specific factors significantly reduce capital or operating costs, or when the target chemical is only marginally volatile, adsorbable, and biodegradable, effectively making all other conventional treatment methods more expensive.

  19. Pretreatment of anaerobic digestion effluent with ammonia stripping and biogas purification.

    PubMed

    Lei, Xiaohui; Sugiura, Norio; Feng, Chuanping; Maekawa, Takaaki

    2007-07-16

    In this study, ammonia stripping was optimized for pretreating anaerobic digestion effluent from an anaerobic digestion plant, and the possibility of using CO(2) stripping and biogas injection for adjusting the pH of the effluent before and after the ammonia stripping process was also investigated. For ammonia stripping, the results showed that an overdose of calcium hydroxide, i.e., 27.5g/L wastewater, achieved higher ammonia, phosphorus, chemical oxygen demand, suspended solids, and turbidity removal efficiency. An air flow rate of 5L/min for 1L of wastewater was thought as suitable for engineering application. The pH of the anaerobic digestion effluent can be increased from about 7 to about 9 by CO(2) stripping, however which is insufficient for ammonia stripping. For 1L of wastewater treated after ammonia stripping, the pH can be neutralized to about 7 from greater than 11 through biogas injection at 1L/min for less than 30min, and continuous injection does not decrease the pH. It was roughly estimated that 43m(3) of biogas (CH(4):CO(2) approximately 60%:40%) produced daily could be purified to CH(4):CO(2) approximately 74%:26% by neutralizing the pH of the 5m(3) anaerobic digestion effluent pretreated by ammonia stripping. PMID:17178436

  20. 46 CFR 153.1600 - Equipment required for conducting the stripping quantity test.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... test. 153.1600 Section 153.1600 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED... MATERIALS Test and Calculation Procedures for Determining Stripping Quantity, Clingage NLS Residue, and Total NLS Residue § 153.1600 Equipment required for conducting the stripping quantity test. The...

  1. 46 CFR 153.1600 - Equipment required for conducting the stripping quantity test.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... test. 153.1600 Section 153.1600 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED... MATERIALS Test and Calculation Procedures for Determining Stripping Quantity, Clingage NLS Residue, and Total NLS Residue § 153.1600 Equipment required for conducting the stripping quantity test. The...

  2. 78 FR 79667 - Stainless Steel Sheet and Strip in Coils From Japan: Initiation of Expedited Changed...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-12-31

    ... Sheet and Strip in Coils from Japan: Final Results of Antidumping Duty Administrative Review, 75 FR 6631... balance iron. Permanent magnet iron-chromium-cobalt alloy stainless strip is also excluded from the scope... temperature corrosion. It has a melting point of 1390 degrees Celsius and displays a creep rupture limit of...

  3. High effectiveness of tailored flower strips in reducing pests and crop plant damage.

    PubMed

    Tschumi, Matthias; Albrecht, Matthias; Entling, Martin H; Jacot, Katja

    2015-09-01

    Providing key resources to animals may enhance both their biodiversity and the ecosystem services they provide. We examined the performance of annual flower strips targeted at the promotion of natural pest control in winter wheat. Flower strips were experimentally sown along 10 winter wheat fields across a gradient of landscape complexity (i.e. proportion non-crop area within 750 m around focal fields) and compared with 15 fields with wheat control strips. We found strong reductions in cereal leaf beetle(CLB) density (larvae: 40%; adults of the second generation: 53%) and plant damage caused by CLB (61%) in fields with flower strips compared with control fields. Natural enemies of CLB were strongly increased in flower strips and in part also in adjacent wheat fields. Flower strip effects on natural enemies, pests and crop damage were largely independent of landscape complexity(8-75% non-crop area). Our study demonstrates a high effectiveness of annual flower strips in promoting pest control, reducing CLB pest levels below the economic threshold. Hence, the studied flower strip offers a viable alternative to insecticides. This highlights the high potential of tailored agri-environment schemes to contribute to ecological intensification and may encourage more farmers to adopt such schemes.

  4. Quantification of dichlorvos released from kill strips used in boll weevil eradication programs

    Technology Transfer Automated Retrieval System (TEKTRAN)

    Two types of kill strips, Hercon Vaportape II and Plato Insecticide Strip, are used by boll weevil, Anthonomus grandis (Boheman), eradication programs in the U.S. Both types utilize dichlorvos as the killing agent and are marketed to last up to a month in traps. Consequently, programs typically re...

  5. Experimental evidence of photoinduced vortex crossing in current carrying superconducting strips

    NASA Astrophysics Data System (ADS)

    Casaburi, A.; Heath, R. M.; Ejrnaes, M.; Nappi, C.; Cristiano, R.; Hadfield, R. H.

    2015-12-01

    We report an experimental investigation that shows how magnetic vortices are generated and cross a current carrying superconducting strip when illuminated by a bright (˜MeV) and fast (<500 ps duration) infrared light pulse. The work has been carried out using a strike-and-probe electro-optic technique on a device consisting of a parallel superconducting strip configuration, with wide spacing between the strips to allow the interaction of the photons with a single strip. We find that photons hitting one strip induce a collective current redistribution in the parallel strips, which we can quantitatively account for in the framework of the London model by including the effect of generated and trapped magnetic vortices in the superconducting loops formed by the two adjacent slots. The amount of trapped vorticity and its dependence on increasing current density flowing in the illuminated strip is in good agreement with the photon-assisted unbinding of vortex-antivortex pairs. This work allows us to gain a deeper understanding of the interaction between photons and current carrying superconducting strips.

  6. AIS/DOE Technology Roadmap Program: Strip Casting: Anticipating New Routes To Steel Sheet

    SciTech Connect

    Prof. Alan W. Camb; Prof. Anthony Rollett

    2001-08-31

    To determine the potential for strip casting in the steel industry and to develop the fundamental knowledge necessary to allow the role of strip casting in the modern steel industry to be understood. Based upon a study of carbon steel strip castings that were either produced for the program at British Steel or were received from a pre-commercial production machine, the following conclusions were made. Strip casting of carbon steels is technically feasible for sheet material from slightly less than 1 mm thick to 3 mm thick, and, assuming that it is economically viable, it will be first applied in carbon steel markets that do not require stringent surface quality or extensive forming. The potential of strip casting as a casting process to be developed for steel castings is very high as the cast strip has some very novel characteristics. Direct cast carbon strip has better surface quality, shape and profile than any other casting process currently available. The more rapidly solidified structure of direct cast strip tends to be strong with low ductility; however, with adequate thermal treatment, it is possible to develop a variety of properties from the same grade. The process is more amenable at this time to production tonnages per year of the order of 500,000 tons and as such will first find niche type applications. This technology is an additional technology for steel production and will be in addition to, rather than a replacement for, current casting machines.

  7. Optimizing the Intrinsic Signal-to-Noise Ratio of MRI Strip Detectors

    PubMed Central

    Kumar, Ananda; Bottomley, Paul A.

    2007-01-01

    An MRI detector is formed from a conducting strip separated by a dielectric substrate from a ground plane, and tuned to a quarter-wavelength. By distributing discrete tuning elements along the strip, the geometric design may be adjusted to optimize the signal-to-noise ratio (SNR) for a given application. Here a numerical electromagnetic (EM) method of moments (MoM) is applied to determine the length, width, substrate thickness, dielectric constant, and number of tuning elements that yield the best intrinsic SNR (ISNR) of the strip detector at 1.5 Tesla. The central question of how strip performance compares with that of a conventional optimized loop coil is also addressed. The numerical method is validated against the known ISNR performance of loop coils, and its ability to predict the tuning capacitances and performance of seven experimental strip detectors of varying length, width, substrate thickness, and dielectric constant. We find that strip detectors with low-dielectric constant, moderately thin-substrate, and length about 1.3 (±0.2) times the depth of interest perform best. The ISNR of strips is comparable to that of loops (i.e., higher close to the detector but lower at depth). The SNR improves with two inherently-decoupled strips, whose sensitivity profile is well-suited to parallel MRI. The findings are summarized as design “rules of thumb.” PMID:16724302

  8. Existence of boundary values of solutions of elliptic equations in a strip

    SciTech Connect

    Mikhailov, Valentin P

    2012-01-31

    Given a linear constant-coefficient elliptic equation of arbitrary order on a two-dimensional strip, a criterion is obtained for the existence of the mean-square limits of its solutions on the boundary of the strip. Bibliography: 2 titles.

  9. 78 FR 47276 - Polyethylene Terephthalate (PET) Film, Sheet, and Strip From India: Final Results of the...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-08-05

    ...: Polyethylene Terephthalate Film, Sheet, and Strip From India, 67 FR 44179 (July 1, 2002). On April 2, 2012, the... 1930, as amended (the Act). See Initiation of Five-Year (``Sunset'') Reviews, 78 FR 19647 (April 2... International Trade Administration Polyethylene Terephthalate (PET) Film, Sheet, and Strip From India:...

  10. Green's functions for dislocations in bonded strips and related crack problems

    NASA Technical Reports Server (NTRS)

    Ballarini, R.; Luo, H. A.

    1990-01-01

    Green's functions are derived for the plane elastostatics problem of a dislocation in a bimaterial strip. Using these fundamental solutions as kernels, various problems involving cracks in a bimaterial strip are analyzed using singular integral equations. For each problem considered, stress intensity factors are calculated for several combinations of the parameters which describe loading, geometry and material mismatch.

  11. Gas Loss by Ram Pressure Stripping and Internal Feedback from Low-mass Milky Way Satellites

    NASA Astrophysics Data System (ADS)

    Emerick, Andrew; Mac Low, Mordecai-Mark; Grcevich, Jana; Gatto, Andrea

    2016-08-01

    The evolution of dwarf satellites in the Milky Way (MW) is affected by a combination of ram pressure stripping (RPS), tidal stripping, and internal feedback from massive stars. We investigate gas loss processes in the smallest satellites of the MW using three-dimensional, high-resolution, idealized wind tunnel simulations, accounting for gas loss through both ram pressure stripping and expulsion by supernova feedback. Using initial conditions appropriate for a dwarf galaxy like Leo T, we investigate whether or not environmental gas stripping and internal feedback can quench these low-mass galaxies on the expected timescales, shorter than 2 Gyr. We find that supernova feedback contributes negligibly to the stripping rate for these low star formation rate galaxies. However, we also find that RPS is less efficient than expected in the stripping scenarios we consider. Our work suggests that although RPS can eventually completely strip these galaxies, other physics is likely at play to reconcile our computed stripping times with the rapid quenching timescales deduced from observations of low-mass MW dwarf galaxies. We discuss the roles additional physics may play in this scenario, including host-satellite tidal interactions, cored versus cuspy dark matter profiles, reionization, and satellite preprocessing. We conclude that a proper accounting of these physics together is necessary to understand the quenching of low-mass MW satellites.

  12. 75 FR 59744 - Stainless Steel Sheet and Strip From Germany, Italy, Japan, Korea, Mexico, and Taiwan

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-09-28

    ... group response to its notice of institution (75 FR 30437, June 1, 2010) was adequate and that the... COMMISSION Stainless Steel Sheet and Strip From Germany, Italy, Japan, Korea, Mexico, and Taiwan AGENCY... Korea and the antidumping duty orders on stainless steel sheet and strip from Germany, Italy,...

  13. Design, Analysis, and On-Sun Evaluation of Reflective Strips Under Controlled Buckling

    NASA Technical Reports Server (NTRS)

    Jaworske, Donald A.; Sechkar, Edward A.; Colozza, Anthony J.

    2014-01-01

    Solar concentrators are envisioned for use in a variety of space-based applications, including applications involving in situ resource utilization. Identifying solar concentrators that minimize mass and cost are of great interest, especially since launch cost is driven in part by the mass of the payload. Concentrators must also be able to survive the wide temperature excursions on the lunar surface. Identifying smart structures which compensate for changes in concentrator geometry brought about by temperature extremes are of interest. Some applications may benefit from the ability to change the concentrators focal pattern at will. This paper addresses a method of designing a single reflective strip to produce a desired focal pattern through the use of controlled buckling. Small variations in the cross section over the length of the reflective strip influence the distribution of light in the focal region. A finite element method of analysis is utilized here which calculates the curve produced for a given strip cross section and axial load. Varying axial force and strip cross section over the length of the reflective strip provide a means of optimizing ray convergence in the focal region. Careful selection of a tapered cross section yields a reflective strip that approximates a parabola. An array of reflective strips under controlled buckling produces a light weight concentrator and adjustments in the compression of individual strips provide a means of compensating for temperature excursions or changing the focal pattern at will.

  14. Design, Analysis, and On-Sun Evaluation of Reflective Strips Under Controlled Buckling

    NASA Technical Reports Server (NTRS)

    Jaworske, D. A.; Sechkar, E. A.; Colozza, A. J.

    2014-01-01

    Solar concentrators are envisioned for use in a variety of space-based applications, including applications involving in situ resource utilization. Identifying solar concentrators that minimize mass and cost are of great interest, especially since launch cost is driven in part by the mass of the payload. Concentrators must also be able to survive the wide temperature excursions on the lunar surface. Identifying smart structures which compensate for changes in concentrator geometry brought about by temperature extremes are of interest. Some applications may benefit from the ability to change the concentrator's focal pattern at will. This paper addresses a method of designing a single reflective strip to produce a desired focal pattern through the use of controlled buckling. Small variations in the cross section over the length of the reflective strip influence the distribution of light in the focal region. A finite element method of analysis is utilized here which calculates the curve produced for a given strip cross section and axial load. Varying axial force and strip cross section over the length of the reflective strip provide a means of optimizing ray convergence in the focal region. Careful selection of a tapered cross section yields a reflective strip that approximates a parabola. An array of reflective strips under controlled buckling produces a light weight concentrator and adjustments in the compression of individual strips provide a means of compensating for temperature excursions or changing the focal pattern at will.

  15. Improving Quality of Refrigerated Potato Strips by Near-Aseptic Packaging

    Technology Transfer Automated Retrieval System (TEKTRAN)

    The effect of hot water blanching and near-aseptic packaging on the shelf-life of refrigerated potato strips was investigated based on quality; microbial, textural and color. Potato strips were first blanched at low temperature (60 °C) for 10- or 20-min, and then second blanched at high temperature ...

  16. Stripped-Down Poker: A Classroom Game with Signaling and Bluffing

    ERIC Educational Resources Information Center

    Reiley, David H.; Urbancic, Michael B.; Walker, Mark

    2008-01-01

    The authors present a simplified, "stripped-down" version of poker as an instructional classroom game. Although Stripped-Down Poker is extremely simple, it nevertheless provides an excellent illustration of a number of topics: signaling, bluffing, mixed strategies, the value of information, and Bayes's Rule. The authors begin with a description of…

  17. Laser stripping of relativistic H{sup {minus}} ions with practical considerations

    SciTech Connect

    Tomlin, R.

    1995-12-01

    This paper describes laser stripping of H{sup {minus}} ions. Some applications are suggested for HEP including stripping 2GeV ions circulating in an accelerator with radius 75 meters where laser meets ion head on in a three meter interaction region. The paper describes photoionizaton cross section, laser power calculation, and how to generate the 5 micrometer light.

  18. Role of buffer strips in management of waterway pollution: A review

    NASA Astrophysics Data System (ADS)

    Barling, Rowan D.; Moore, Ian D.

    1994-07-01

    A buffer strip can perform a multitude of functions, and these include channel stability, a filter for sediment and nutrients, water purification (e.g., bacteria and pathogens), a nondisturbance area, and the provision of terrestrial and stream habitat. These functions are reviewed with specific application to Australian conditions, and methods for modeling their performance are outlined. The primary focus is on the use of buffer strips to minimize waterway pollution from diffuse sources since their use is often justified on this basis. Particular attention is given to the conditions under which a buffer strip will act as an effective filter and the conditions under which it will fail. Buffer strips are most effective when the flow is shallow (nonsubmerged), slow, and enters the buffer strip uniformly along its length. Their sediment trapping performance decreases as the sediment particle size decreases. Nutrients are often preferentially attached to fine sediment. As a result, buffer strips are better filters of sediment than of nutrients. Buffer strips should only be considered as a secondary conservation practice after controlling the generation of pollutants at their source and, to be effective, buffer strips should always be carefully designed, installed, and maintained.

  19. 76 FR 58244 - Polyethylene Terephthalate Film, Sheet and Strip From India: Rescission, in Part, of Antidumping...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-09-20

    ... International Trade Administration Polyethylene Terephthalate Film, Sheet and Strip From India: Rescission, in...) order on polyethylene terephthalate film, sheet and strip from India covering the period July 1, 2010...; Opportunity To Request Administrative Review, 76 FR 38609, 38610 (July 1, 2010). The Department received...

  20. 76 FR 18156 - Polyethylene Terephthalate Film, Sheet and Strip From India: Extension of Time Limit for...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-04-01

    ... International Trade Administration Polyethylene Terephthalate Film, Sheet and Strip From India: Extension of... polyethylene terephthalate film, sheet and strip from India covering the period January 1, 2009, through... Deferral of Initiation of Administrative Review, 75 FR 53274 (August 31, 2010). The Department...

  1. 76 FR 39855 - Polyethylene Terephthalate Film, Sheet and Strip From India: Rescission, in Part, of Antidumping...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-07-07

    ... International Trade Administration Polyethylene Terephthalate Film, Sheet and Strip From India: Rescission, in... administrative review of the antidumping duty order on polyethylene terephthalate film, sheet and strip from... Order, Finding, or Suspended Investigation; Opportunity to Request an Administrative Review, 75 FR...

  2. 76 FR 72676 - Polyethylene Terephthalate Film, Sheet, and Strip From Brazil: Final Results of Antidumping Duty...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-11-25

    ... International Trade Administration Polyethylene Terephthalate Film, Sheet, and Strip From Brazil: Final Results... terephthalate film, sheet, and strip (PET film) from Brazil for the period November 1, 2009 through October 31... duty order covering PET film from Brazil and invited interested parties to comment. See...

  3. 75 FR 81570 - Polyethylene Terephthalate Film, Sheet, and Strip From India: Preliminary Results of Antidumping...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-12-28

    ... International Trade Administration Polyethylene Terephthalate Film, Sheet, and Strip From India: Preliminary... semiannual new shipper review (NSR) under the antidumping duty order on polyethylene terephthalate film, sheet, and strip (PET film) from India in response to a request from SRF Limited (SRF). The...

  4. 76 FR 76365 - Polyethylene Terephthalate Film, Sheet, and Strip From the United Arab Emirates: Preliminary...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-12-07

    ... International Trade Administration Polyethylene Terephthalate Film, Sheet, and Strip From the United Arab... film, sheet, and strip (PET Film) from the United Arab Emirates (UAE). This review covers the respondent, JBF RAK LLC (JBF), a producer and exporter of PET Film from the UAE. The Department...

  5. 78 FR 2365 - Polyethylene Terephthalate Film, Sheet and Strip From India: Partial Rescission of Antidumping...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-01-11

    ... Administrative Review, 77 FR 39216, 39217 (July 2, 2012). \\2\\ Petitioners are DuPont Teijin Films, Mitsubishi..., 77 FR 52688 (August 30, 2012). \\6\\ See Polyethylene Terephthalate (PET) Film, Sheet, and Strip from... International Trade Administration Polyethylene Terephthalate Film, Sheet and Strip From India:...

  6. 77 FR 73428 - Polyethylene Terephthalate Film, Sheet, and Strip From the People's Republic of China...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-12-10

    ... Film, Sheet, and Strip from the People's Republic of China: Final Determination of Sales at Less Than... International Trade Administration Polyethylene Terephthalate Film, Sheet, and Strip From the People's Republic of China: Preliminary Results of Administrative Review; 2010-2011 AGENCY: Import...

  7. 75 FR 49900 - Polyethylene Terephthalate Film, Sheet, and Strip From Brazil: Preliminary Results of Antidumping...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-08-16

    ... FR 56573 (November 2, 2009). On November 30, 2009, DuPont Teijin Films, Mitsubishi Polyester Film... Than Fair Value: Polyethylene Terephthalate Film, Sheet, and Strip from Brazil, 73 FR 24560 (May 5... International Trade Administration Polyethylene Terephthalate Film, Sheet, and Strip From Brazil:...

  8. 76 FR 48122 - Polyethylene Terephthalate Film, Sheet, and Strip From Brazil: Preliminary Results of Antidumping...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-08-08

    ... FR 67079 (November 1, 2010). On November 30, 2010, DuPont Teijin Films, Mitsubishi Polyester Film... Sales at Less Than Fair Value: Polyethylene Terephthalate Film, Sheet, and Strip from Brazil, 73 FR... International Trade Administration Polyethylene Terephthalate Film, Sheet, and Strip From Brazil:...

  9. 76 FR 9745 - Polyethylene Terephthalate Film, Sheet, and Strip From Taiwan: Final Results of Antidumping Duty...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-02-22

    ... Film from the People's Republic of China (PRC), for which the scope is essentially identical to the... International Trade Administration Polyethylene Terephthalate Film, Sheet, and Strip From Taiwan: Final Results... terephthalate film (PET Film) from Taiwan. See Polyethylene Terephthalate Film, Sheet, and Strip From...

  10. 78 FR 67113 - Polyethylene Terephthalate Film, Sheet and Strip From India and Taiwan: Preliminary Results of...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-11-08

    ... Value and Antidumping Duty Order: Polyethylene Terephthalate Film, Sheet, and Strip from India, 67 FR... Second Antidumping Duty Sunset Reviews 78 FR 45512 (July 29, 2013) (``PET Film Extension Notice''). \\5... International Trade Administration Polyethylene Terephthalate Film, Sheet and Strip From India and...

  11. 76 FR 30908 - Polyethylene Terephthalate Film, Sheet, and Strip From India: Final Results of Antidumping Duty...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-05-27

    ... International Trade Administration Polyethylene Terephthalate Film, Sheet, and Strip From India: Final Results...) issued the preliminary results of the new shipper review of polyethylene terephthalate film, sheet and strip (PET Film) from India for SRF Limited (SRF), covering the period July 1, 2009, through December...

  12. 77 FR 14501 - Polyethylene Terephthalate Film, Sheet and Strip From India: Extension of Time Limit for...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-03-12

    ... International Trade Administration Polyethylene Terephthalate Film, Sheet and Strip From India: Extension of...) order on polyethylene terephthalate film, sheet and strip from India covering the period July 1, 2010... Requests for Revocation in Part, 76 FR 53404 (August 26, 2011). The Department initiated the review...

  13. 75 FR 81574 - Polyethylene Terephthalate Film, Sheet, and Strip From India: Preliminary Results of...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-12-28

    ... Countervailing Duty Order: Polyethylene Terephthalate Film, Sheet and Strip (PET Film) from India, 67 FR 44179... Countervailing Duty New Shipper Review, 75 FR 69400 (November 12, 2010); Polyethylene Terephthalate Film, Sheet..., and Strip from India, 70 FR 46483, 46485 (August 10, 2005) (PET Film Preliminary Results of...

  14. 76 FR 76948 - Polyethylene Terephthalate Film, Sheet, and Strip From India: Final Results of Countervailing...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-12-09

    ... International Trade Administration Polyethylene Terephthalate Film, Sheet, and Strip From India: Final Results...) issued the preliminary results of the administrative review of polyethylene terephthalate film, sheet and strip (PET Film) from India for Ester Industries Ltd. (Ester), covering the period of review (POR)...

  15. 75 FR 75172 - Polyethylene Terephthalate Film, Sheet, and Strip From Brazil: Final Results of Antidumping Duty...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-12-02

    ... International Trade Administration Polyethylene Terephthalate Film, Sheet, and Strip From Brazil: Final Results... terephthalate film, sheet, and strip (PET film) from Brazil for the period November 6, 2008, through October 31... covering PET film from Brazil and invited interested parties to comment. See Polyethylene...

  16. 78 FR 48651 - Polyethylene Terephthalate Film, Sheet, and Strip From Taiwan; Preliminary Results of Antidumping...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-08-09

    ... International Trade Administration Polyethylene Terephthalate Film, Sheet, and Strip From Taiwan; Preliminary... conducting an administrative review of the antidumping duty order on polyethylene terephthalate film, sheet, and strip (PET Film) from Taiwan. The period of review (POR) is July 1, 2011, through June 30,...

  17. 75 FR 79336 - Polyethylene Terephthalate Film, Sheet and Strip From India: Extension of Time Limit for...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-12-20

    ... International Trade Administration Polyethylene Terephthalate Film, Sheet and Strip From India: Extension of...) initiated a new shipper review under the countervailing duty order on polyethylene terephthalate film, sheet... Terephthalate Film, Sheet and Strip from India: Initiation of Antidumping Duty and Countervailing Duty...

  18. 77 FR 3730 - Polyethylene Terephthalate Film, Sheet and Strip From India: Rescission, in Part, of Antidumping...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-01-25

    ... International Trade Administration Polyethylene Terephthalate Film, Sheet and Strip From India: Rescission, in... administrative review of the antidumping duty (AD) order on polyethylene terephthalate film, sheet and strip from... Order, Finding, or Suspended Investigation; Opportunity To Request Administrative Review, 76 FR...

  19. 78 FR 78333 - Polyethylene Terephthalate Film, Sheet, and Strip From the People's Republic of China...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-12-26

    ... Terephthalate Film, Sheet, and Strip from the People's Republic of China'' from Christian Marsh, Deputy... Insulating Material Co., Ltd 31.77 DuPont Teijin Films China Ltd., DuPont Hongji Films Foshan 31.77 Co., Ltd... International Trade Administration Polyethylene Terephthalate Film, Sheet, and Strip From the People's...

  20. 76 FR 39855 - Polyethylene Terephthalate Film, Sheet and Strip From India: Rescission, in Part, of...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-07-07

    ... International Trade Administration Polyethylene Terephthalate Film, Sheet and Strip From India: Rescission, in... administrative review of the countervailing duty order on polyethylene terephthalate film, sheet and strip from... Duty Order, Finding, or Suspended Investigation; Opportunity to Request an Administrative Review, 75...