Role of CACNA1C gene polymorphisms and protein expressions in the pathogenesis of schizophrenia: a case-control study in a Chinese population.

PubMed

Zhang, Sheng-Yu; Hu, Qiang; Tang, Tao; Liu, Chao; Li, Cheng-Chong; Yang, Xiao-Guang; Zang, Yin-Yin; Cai, Wei-Xiong

2017-08-01

The study aimed to investigate the correlations of CACNA1C genetic polymorphisms and protein expression with the pathogenesis of schizophrenia in a Chinese population. This research included 139 patients diagnosed with schizophrenia (case group) and 141 healthy volunteers (control group). Case and control samples were genotyped using denaturing high-performance liquid chromatography (DHPLC). Haplotypes of rs10848683, rs2238032, and rs2299661 were analyzed using the Shesis software. A mouse model of schizophrenia was established and assigned to test and blank groups. Western blotting was used to detect CACNA1C protein expression. The genotype and allele distribution of rs2238032 and rs2299661 differed between the case and control groups. TT genotype of rs2238032 and G allele of rs2299661 could potentially reduce the risk of schizophrenia. The distribution of rs2238032 genotype has a close connection with cognitive disturbance and the results of the general psychopathology classification exam. The distribution of rs2299661 genotypes was closely related to sensory and perceptual disorders, negative symptom subscales, and the results of the general psychopathology classification exam. CTC haplotype increased and CTG decreased the risk of schizophrenia in healthy people. In the brain tissues of mice with schizophrenia, the CACNA1C protein expression was higher in the test group than in the blank group. Our study demonstrated that CACNA1C gene polymorphisms and CACNA1C protein expression were associated with schizophrenia and its clinical phenotypes.

R-189 (C-620) air compressor control logic software documentation. Revision 1

DOE Office of Scientific and Technical Information (OSTI.GOV)

Walter, K.E.

1995-06-08

This relates to FFTF plant air compressors. Purpose of this document is to provide an updated Computer Software Description for the software to be used on R-189 (C-620-C) air compressor programmable controllers. Logic software design changes were required to allow automatic starting of a compressor that had not been previously started.

Effectiveness of computer-aided diagnosis of colorectal lesions using novel software for magnifying narrow-band imaging: a pilot study.

PubMed

Tamai, Naoto; Saito, Yutaka; Sakamoto, Taku; Nakajima, Takeshi; Matsuda, Takahisa; Sumiyama, Kazuki; Tajiri, Hisao; Koyama, Ryosuke; Kido, Shoji

2017-08-01

 Magnifying narrow-band imaging (M-NBI) enables detailed observation of microvascular architecture and can be used in endoscopic diagnosis of colorectal lesion. However, in clinical practice, differential diagnosis and estimation of invasion depth of colorectal lesions based on M-NBI findings require experience. Therefore, developing computer-aided diagnosis (CAD) for M-NBI would be beneficial for clinical practice. The aim of this study was to evaluate the effectiveness of software for CAD of colorectal lesions. In collaboration with Yamaguchi University, we developed novel software that enables CAD of colorectal lesions using M-NBI images. This software for CAD further specifically divides original Sano's colorectal M-NBI classification into 3 groups (group A, capillary pattern [CP] type I; group B, CP type II + CP type IIIA; group C, CP type IIIB), which describe hyperplastic polyps (HPs), adenoma/adenocarcinoma (intramucosal [IM] to submucosal [SM]-superficial) lesions, and SM-deep lesions, respectively. We retrospectively reviewed 121 lesions evaluated using M-NBI. The 121 reviewed lesions included 21 HP, 80 adenoma/adenocarcinoma (IM to SM-superficial), and 20 SM-deep lesions. The concordance rate between the CAD and the diagnosis of the experienced endoscopists was 90.9 %. The sensitivity, specificity, positive and negative predictive values, and accuracy of the CAD for neoplastic lesions were 83.9 %, 82.6 %, 53.1 %, 95.6 %, and 82.8 %, respectively. The values for SM-deep lesions were 83.9 %, 82.6 %, 53.1 %, 95.6 %, and 82.8 %, respectively.  Relatively high diagnostic values were obtained using CAD. This software for CAD could possibly lead to a wider use of M-NBI in the endoscopic diagnosis of colorectal lesions.

[The effect of core veneer thickness ratio on the flexural strength of diatomite-based dental ceramic].

PubMed

Jiang, Jie; Zhang, Xin; Gao, Mei-qin; Zhang, Fei-min; Lu, Xiao-li

2015-06-01

To evaluate the effect of different core veneer thickness ratios on the flexural strength and failure mode of bilayered diatomite-based dental ceramics. Diatomite-based dental ceramics blocks (16 mm×5.4 mm×1 mm) were sintered with different thickness of veneer porcelains: 0 mm (group A), 0.6 mm (group B), 0.8 mm (group C) and 1.0 mm (group D). Flexural strength was detected and scanning electron microscope was used to observe the interface microstructure. Statistical analysis was performed using SPSS 17.0 software package. With the increase of the thickness of the veneer porcelain, flexural strength of group C showed highest flexural strength up to (277.24±5.47) MPa. Different core veneer thickness ratios can significantly influence the flexural strength of bilayered diatomite-based dental ceramics. Supported by Science and Technology Projects of Nantong City (HS2013010).

Proposal for a CLIPS software library

NASA Technical Reports Server (NTRS)

Porter, Ken

1991-01-01

This paper is a proposal to create a software library for the C Language Integrated Production System (CLIPS) expert system shell developed by NASA. Many innovative ideas for extending CLIPS were presented at the First CLIPS Users Conference, including useful user and database interfaces. CLIPS developers would benefit from a software library of reusable code. The CLIPS Users Group should establish a software library-- a course of action to make that happen is proposed. Open discussion to revise this library concept is essential, since only a group effort is likely to succeed. A response form intended to solicit opinions and support from the CLIPS community is included.

Software tool for physics chart checks.

PubMed

Li, H Harold; Wu, Yu; Yang, Deshan; Mutic, Sasa

2014-01-01

Physics chart check has long been a central quality assurance (QC) measure in radiation oncology. The purpose of this work is to describe a software tool that aims to accomplish simplification, standardization, automation, and forced functions in the process. Nationally recognized guidelines, including American College of Radiology and American Society for Radiation Oncology guidelines and technical standards, and the American Association of Physicists in Medicine Task Group reports were identified, studied, and summarized. Meanwhile, the reported events related to physics chart check service were analyzed using an event reporting and learning system. A number of shortfalls in the chart check process were identified. To address these problems, a software tool was designed and developed under Microsoft. Net in C# to hardwire as many components as possible at each stage of the process. The software consists of the following 4 independent modules: (1) chart check management; (2) pretreatment and during treatment chart check assistant; (3) posttreatment chart check assistant; and (4) quarterly peer-review management. The users were a large group of physicists in the author's radiation oncology clinic. During over 1 year of use the tool has proven very helpful in chart checking management, communication, documentation, and maintaining consistency. The software tool presented in this work aims to assist physicists at each stage of the physics chart check process. The software tool is potentially useful for any radiation oncology clinics that are either in the process of pursuing or maintaining the American College of Radiology accreditation.

Framework Based Guidance Navigation and Control Flight Software Development

NASA Technical Reports Server (NTRS)

McComas, David

2007-01-01

This viewgraph presentation describes NASA's guidance navigation and control flight software development background. The contents include: 1) NASA/Goddard Guidance Navigation and Control (GN&C) Flight Software (FSW) Development Background; 2) GN&C FSW Development Improvement Concepts; and 3) GN&C FSW Application Framework.

[Evaluation of root canal isthmus debridement efficacy of Er:YAG laser in combination with sodium hypochlorite].

PubMed

Zhou, Meng-Qi; Wang, Hao-Ming; Xiao, Jia-Qi; Hong, Jin

2016-10-01

To histologically evaluate the efficacy of sodium hypochlorite (NaClO) in combination with Er:YAG (erbium-doped yttrium aluminium garnet) laser in dissolving necrotic tissue and cleaning root canals as well as canal isthmuses. After scanned by cone-beam CT (CBCT), 50 well-prepared premolars with root canal isthmuses were selected and randomly assigned into 5 groups. They were subsequently subjected to different regimens as followed: group A-irrigated with 1% NaClO for 1 minute, group B- irradiated by Er:YAG laser at 0.5 W combined with 1% NaClO irrigation for 1 minute, group C- irradiated by Er:YAG laser at 1.0 W combined with 1% NaClO irrigation for 1 minute, group D- irradiated by Er:YAG laser at 2.0 W combined with 1% NaClO irrigation for 1 minute,group E- negative control. After histological preparation and staining, the cross-sections were evaluated for percentage of tissue removal from root canals and isthmuses. The cleanliness values were calculated using SPSS 13.0 software package. The mean percentage of root canals in group A, B, C and D was 95.24%, 96.53%、97.63% and 98.22%, respectively, and the mean percentage of isthmuses was 16.50%, 51.48%, 52.56% and 53.83%, respectively. The mean percentage of root canal and isthmus cleanliness values were significantly higher in group B, C and D (P<0.05) than that in group A. There was no significant differences of root canal and isthmus cleanliness among group B, C and D. Er:YAG laser combined with 1% NaClO irrigation may be used effectively in root canal and root canal isthmus cleanliness as a new method.

Software OT&E Guidelines. Volume 3. Software Maintainability Evaluator’s Handbook

DTIC Science & Technology

1980-04-01

SOFTWARE OT&E " 1 GUIDELINES . VOLUME III SOFTWARE MAINTAINABILITY EVALUATOR’S HANDBOOK APRIL 1980 AIR FORCE TEST AND EVALUATION CENTER KIRTLAND AIR...FORCE BASE NEW MEXICO 87117 C-, -j AfTECP 800-3 AF’r...........3 ...... UNCLASSIFIED SECURITY CLASSIFICATION OF THIS PAGE (When D.. Entered) RE:PORT...c -. 5 TY!aJ0. PERIOD COVERED SOFTWARE OT& . GUIDELINES, Volume III .of five). -1 softare-R.aintainability Evaluator’s P-IEFnook’ 4ina. i 1980

Software selection based on analysis and forecasting methods, practised in 1C

NASA Astrophysics Data System (ADS)

Vazhdaev, A. N.; Chernysheva, T. Y.; Lisacheva, E. I.

2015-09-01

The research focuses on the problem of a “1C: Enterprise 8” platform inboard mechanisms for data analysis and forecasting. It is important to evaluate and select proper software to develop effective strategies for customer relationship management in terms of sales, as well as implementation and further maintenance of software. Research data allows creating new forecast models to schedule further software distribution.

Software Engineering Improvement Activities/Plan

NASA Technical Reports Server (NTRS)

2003-01-01

bd Systems personnel accomplished the technical responsibilities for this reporting period, as planned. A close working relationship was maintained with personnel of the MSFC Avionics Department Software Group (ED14). Work accomplishments included development, evaluation, and enhancement of a software cost model, performing literature search and evaluation of software tools available for code analysis and requirements analysis, and participating in other relevant software engineering activities. Monthly reports were submitted. This support was provided to the Flight Software Group/ED 1 4 in accomplishing the software engineering improvement engineering activities of the Marshall Space Flight Center (MSFC) Software Engineering Improvement Plan.

Lipid peroxidation and antioxidant enzymes activity in controlled and uncontrolled Type 2 diabetic patients.

PubMed

Zarei, Mahnaz; Farahnak, Zahra; Hosseinzadeh-Attar, Mohammad Javad; Javanbakht, Mohammad Hassan; Hosseinzadeh, Payam; Derakhshanian, Hoda; Farahbakhsh-Farsi, Payam; Djalali, Mahmoud

2016-05-01

This study was designed to compare lipid peroxidation and antioxidant enzymes activity in Type 2 diabetes patients with good or weak glycemic control. In this case-control study, 62 Type 2 diabetic patients with glycated hemoglobin (HbA1c) between 6 and 8 were enrolled as the controlled group and 55 patients with HbA1c > 8 were selected as an uncontrolled group. Patients were all referred to Iranian Diabetes Association in Tehran, Iran, from 2010 onward. Groups were chosen by convenience sampling and were matched based on age, sex and duration of disease. Demographic questionnaire, two 24-hour food recall, HbA1c, insulin, malondialdehyde (MDA), superoxide dismutase (SOD), and catalase were measured in blood samples. Data were analyzed by Food Processor II and SPSS software. A mean daily consumption of energy, carbohydrate, protein, and fat was not significantly different between two groups. MDA in the uncontrolled group was significantly higher than controlled group (2.03 ± 0.88 vs. 1.65 ± 1.01 nmol/ml; P = 0.030). A mean SOD was slightly higher in the uncontrolled group comparing to the control group (843.3 ± 101.9 vs. 828.0 ± 127.3 U/g Hb; P = 0.400). These data suggest that MDA as a lipid peroxidation indicator is higher in uncontrolled diabetes probably due to chronic high blood sugar followed by higher oxidative stress.

Appraisal Requirements for CMMI (Registered Trademark) Version 1.3 (ARC, V1.3)

DTIC Science & Technology

2011-04-01

Software Engineering Institute) • Rassa, Robert C . (Raytheon Space and Airborne Systems ) • Richter, Karen (OSD/IDA) • Young, Rusty (Software...CMU/SEI-2011-TR-006 | 21 • Penn, Lynn (Lockheed Martin) • Rassa, Robert C . (Raytheon Space and Airborne Systems) • Wilson, Harold G. (Northrop...Government Contract Number FA8721-05- C -0003 with Carnegie Mellon University for the operation of the Software Engineering Institute, a federally funded

[Comparative study of complications among routine method,high speed turbine handpiece and piezosurgery device after extraction of impacted wisdom teeth].

PubMed

Guo, Zhao-zhong; Zhang, Heng; Li, Yan; Li, Xin; Liu, Yin; Wang, Yang; Yuan, Chun-xia; Liu, Xue

2012-04-01

To investigate complications in extraction of complicated impacted wisdom teeth whose root apex near to the inferior alveolar nerve(IAN) by using routine method(chisels),high speed turbine handpiece and piezosurgery device respectively. Three hundred qualified patients with impacted wisdom teeth were divided into three groups randomly,one hundred patients in group A were extracted by routine method, one hundred patients in group B were extracted by high speed turbine handpiece, and one hundred patients in group C were extracted by piezosurgery device. The operation time, postoperative pain duration,dry socket and IAN injury were compared between each two groups. All statistical analysis was performed using SPSS 13.0 software package. Differences between groups were compared using a paired t test (quantitative data) or Chi-square test (qualitative data). The operation time in group A was(14.12±0.12)min, (7.22±0.15)min in group B, (25.23±0.32)min in group C; Significant difference was found between group A and group B(P<0.05), group B and group C(P<0.05),group A and group C(P<0.05).Postoperative pain duration was(62.15±1.51)h in group A, (48.23±1.23)h in group B, (14.34±O.80)h in group C; Significant difference was found between group A and group B(P<0.05), group B and group C(P<0.05),group A and group C(P<0.05).9 patients developed dry socket in group A, 2 in group B, and 1 in group C; Significant difference was found between group A and group B(P<0.05), group A and group C(P<0.05). Six patients had IAN injury in group A, 2 in group B, 0 in group C. Significant difference was found between group A and group C. Compared with routine method, high speed turbine is better in extraction of impacted wisdom teeth, which can shorten operation time, lessen postoperative complications. Although there was longer operation time compared with group A and B, piezosurgery device is more effective in reducing postoperative complications.

[Preliminary study of bonding strength between diatomite-based dental ceramic and veneering porcelains].

PubMed

Lu, Xiao-li; Gao, Mei-qin; Cheng, Yu-ye; Zhang, Fei-min

2015-04-01

In order to choose the best veneering porcelain for diatomite-based dental ceramic substrate, the bonding strength between diatomite-based dental ceramics and veneering porcelains was measured, and the microstructure and elements distribution of interface were analyzed. The coefficient of thermal expansion (CTE) of diatomite-based dental ceramics was detected by dilatometry. Three veneering porcelain materials were selected with the best CTE matching including alumina veneering porcelain (group A), titanium porcelain veneering porcelain (group B), and E-max veneering porcelain (group C). Shear bonding strength was detected. SEM and EDS were used to observe the interface microstructure and element distribution. Statistical analysis was performed using SPSS 17.0 software package. The CTE of diatomite-based dental ceramics at 25-500 degrees centigrade was 8.85×10-6K-1. The diatomite-based substrate ceramics combined best with group C. Shear bonding strength between group A and C and group B and C both showed significant differences(P<0.05). SEM and EDS showed that the interface of group C sintered tightly and elements permeated on both sides of the interface. The diatomite-based substrate ceramics combines better with E-max porcelain veneer.

Peregrine Software Toolchains | High-Performance Computing | NREL

Science.gov Websites

toolchain is an open-source alternative against which many technical applications are natively developed and tested. The Portland Group compilers are not fully supported, but are available to the HPC community. Use Group (PGI) C/C++ and Fortran (partially supported) The PGI Accelerator compilers include NVIDIA GPU

[Computer-assisted phacoemulsification for hard cataracts].

PubMed

Zemba, M; Papadatu, Adriana-Camelia; Sîrbu, Laura-Nicoleta; Avram, Corina

2012-01-01

to evaluate the efficiency of new torsional phacoemulsification software (Ozil IP system) in hard nucleus cataract extraction. 45 eyes with hard senile cataract (degree III and IV) underwent phacoemulsification performed by the same surgeon, using the same technique (stop and chop). Infiniti (Alcon) platform was used, with Ozil IP software and Kelman phaco tip miniflared, 45 degrees. The nucleus was split into two and after that the first half was phacoemulsificated with IP-on (group 1) and the second half with IP-off (group 2). For every group we measured: cumulative dissipated energy (CDE), numbers of tip closure that needed manual desobstruction the amount of BSS used. The mean CDE was the same in group 1 and in group 2 (between 6.2 and 14.9). The incidence of occlusion that needed manual desobstruction was lower in group 1 (5 times) than in group 2 (13 times). Group 2 used more BSS compared to group 1. The new torsional software (IP system) significantly decreased occlusion time and balanced salt solution use over standard torsional software, particularly with denser cataracts.

Computer-Aided Decision Making.

DTIC Science & Technology

1988-04-01

Center at Gunter APS, Alabama, 1% predicts that 150.000 more microcomputers, with integrated software, will be VP aided !,: the A:r Fcrce inventory...a computer’s power when he said, ’it is also useful to anticipate or predict changes in the data Pondering ’what if’ situations enabled me to answer... predict future b) experts forecast In Isolation, then consensus is found C. Group decision making (3t30-34) Slide i-i 1. Advantages a. broader background 1

Effects comparison between low glycemic index diets and high glycemic index diets on HbA1c and fructosamine for patients with diabetes: A systematic review and meta-analysis.

PubMed

Wang, Qiong; Xia, Wei; Zhao, Zhigang; Zhang, Huifeng

2015-10-01

The purpose of this study is to evaluate the effect of low glycemic index (GI) through the comparison of low-GI foods group and high-GI foods group on glycemic control (the measurements were HbA1c and fructosamine) for patients with diabetes. The studies were retrieved from databases including PubMed, MEDLINE, Springer, Elsevier Science Direct, Cochrane Library and Google scholar from their inception to August 2014. Review Manager 5.1 and STATA package v.11.0 software were applied for the meta-analysis. Standard mean difference (SWD) and its corresponding 95% confidence interval (CI) for HbA1c and fructosamine of patients with diabetes were collected and calculated in a fixed or random effects model when appropriate. Subgroup analysis stratified by study design, geographic area of participants and types of diabetes were also conducted. There were significant differences of overall effects on HbA1c between low-GI foods group and high-GI foods group (SWD=-0.42, 95%CI=-0.69 to -0.16, P<0.01) in patients with diabetes, and the subgroup analysis indicated that significant differences of HbA1c were also found between the two groups in crossover study, in Australian population and American population, as well as in type 2 diabetes. The overall fructosamine was also significantly different in patients with diabetes between low-GI foods and high-GI foods group (SMD=-0.44, 95%CI=-0.82 to -0.06, P=0.02). Our results suggest that low-GI diets achieve a more beneficial effect on glycemic control than that of high-GI foods diets. Copyright © 2014 Primary Care Diabetes Europe. Published by Elsevier Ltd. All rights reserved.

Reuse Metrics for Object Oriented Software

NASA Technical Reports Server (NTRS)

Bieman, James M.

1998-01-01

One way to increase the quality of software products and the productivity of software development is to reuse existing software components when building new software systems. In order to monitor improvements in reuse, the level of reuse must be measured. In this NASA supported project we (1) derived a suite of metrics which quantify reuse attributes for object oriented, object based, and procedural software, (2) designed prototype tools to take these measurements in Ada, C++, Java, and C software, (3) evaluated the reuse in available software, (4) analyzed the relationship between coupling, cohesion, inheritance, and reuse, (5) collected object oriented software systems for our empirical analyses, and (6) developed quantitative criteria and methods for restructuring software to improve reusability.

Using Web Metric Software to Drive: Mobile Website Development

ERIC Educational Resources Information Center

Tidal, Junior

2011-01-01

Many libraries have developed mobile versions of their websites. In order to understand their users, web developers have conducted both usability tests and focus groups, yet analytical software and web server logs can also be used to better understand users. Using data collected from these tools, the Ursula C. Schwerin Library has made informed…

The effect of word prediction settings (frequency of use) on text input speed in persons with cervical spinal cord injury: a prospective study.

PubMed

Pouplin, Samuel; Roche, Nicolas; Antoine, Jean-Yves; Vaugier, Isabelle; Pottier, Sandra; Figere, Marjorie; Bensmail, Djamel

2017-06-01

To determine whether activation of the frequency of use and automatic learning parameters of word prediction software has an impact on text input speed. Forty-five participants with cervical spinal cord injury between C4 and C8 Asia A or B accepted to participate to this study. Participants were separated in two groups: a high lesion group for participants with lesion level is at or above C5 Asia AIS A or B and a low lesion group for participants with lesion is between C6 and C8 Asia AIS A or B. A single evaluation session was carried out for each participant. Text input speed was evaluated during three copying tasks: • without word prediction software (WITHOUT condition) • with automatic learning of words and frequency of use deactivated (NOT_ACTIV condition) • with automatic learning of words and frequency of use activated (ACTIV condition) Results: Text input speed was significantly higher in the WITHOUT than the NOT_ACTIV (p< 0.001) or ACTIV conditions (p = 0.02) for participants with low lesions. Text input speed was significantly higher in the ACTIV than in the NOT_ACTIV (p = 0.002) or WITHOUT (p < 0.001) conditions for participants with high lesions. Use of word prediction software with the activation of frequency of use and automatic learning increased text input speed in participants with high-level tetraplegia. For participants with low-level tetraplegia, the use of word prediction software with frequency of use and automatic learning activated only decreased the number of errors. Implications in rehabilitation   Access to technology can be difficult for persons with disabilities such as cervical spinal cord injury (SCI). Several methods have been developed to increase text input speed such as word prediction software.This study show that parameter of word prediction software (frequency of use) affected text input speed in persons with cervical SCI and differed according to the level of the lesion. • For persons with high-level lesion, our results suggest that this parameter must be activated so that text input speed is increased. • For persons with low lesion group, this parameter must be activated so that the numbers of errors are decreased. • In all cases, the activation of the parameter of frequency of use is essential in order to improve the efficiency of the word prediction software. • Health-related professionals should use these results in their clinical practice for better results and therefore better patients 'satisfaction.

Evaluation of temperature change during antimicrobial photodynamic therapy with two different photosensitizers in dental caries.

PubMed

Mirzaie, Mansoreh; Yassini, Esmael; Ashnagar, Sajjad; Hadadi, Azadeh; Chiniforush, Nasim

2016-06-01

Many attempts have been made in elimination of bacteria in infected and demineralized dentin to not only provide efficient bactericidal potential, but to have minimal damage for tooth structure. The aim of this study was to assess the temperature change during aPDT with ICG and TBO compared with conventional Diode laser irradiation. 48 premolar teeth which were selected for this study. A class I cavity was drilled in each teeth, with dimensions of 2mm width, 4mm length and depth of 2.5-3.5mm, providing a dentinal wall of approximately 0.5mm for pulp chamber. Then teeth were randomly allocated in 4 experimental groups (n=12); Group 1: TBO+LED, Group 2: ICG+Diode Laser, Group 3: Diode laser with output power of 0.5W, Group 4: Diode laser with output power of 1W. Thermocouple device was held by experimenter hand and the sensor was in pulp chamber of the teeth. Heat generated during irradiation was reported on LCD screen by NUX Plus software. Repeated measure ANOVA was used in order to compare the temperature before and after laser application. Tukey HSD was used to compare the results between groups. Temperature was risen for about 0.54±0.05°C for group 1, 1.67±0.14°C for group 2, 4.21±0.83°C for group 3, and 4. 50±0.32°C for group 4. The difference between group 1 & 2, 1 & 3 and 1 & 4 was significant (p<0.0001). According to results of this study, Diode (with or without photosensitizer- 0.5 and 1W) can be safely used as alternative approach for disinfection after caries removal in thermal point of view. Copyright © 2016. Published by Elsevier B.V.

Association of Interleukin-1 Gene Single Nucleotide Polymorphisms with Keratoconus in Chinese Han Population.

PubMed

Wang, Yani; Wei, Wei; Zhang, Changning; Zhang, XueHui; Liu, Ming; Zhu, Xiuping; Xu, Kun

2016-05-01

To investigate whether interleukin-1 alpha (IL1A) and interleukin-1 beta (IL1B) polymorphisms are associated with keratoconus (KC) in unrelated Chinese Han patients. The IL1A (rs2071376) and IL1B (rs1143627, rs16944) polymorphisms were genotyped in 115 unrelated Chinese Han KC patients and 101 healthy Chinese Han volunteers with the Sequenom MassARRAY RS1000. Sequenom Typer 4.0 software, PLINK 1.07, Haploview 4.0 software platform were used to analyze the allelic variants of IL1A and IL1B genes, and their association with KC risk factors were assessed. Among the variants, the three SNPs (rs2071376 in IL1A, rs1143627 and rs16944 in the promoter region of IL1B) were different between the two groups. The A allele of rs2071376 (A > C, p = 0.017, OR = 1.968, 95% C.I. 1.313-3.425), the C allele of rs1143627 (C > T, p < 0.001, OR = 2.864, 95% C.I. 1.631-4.968) and the A allele of rs16944 (A > G, p = 0.002, OR = 2.401, 95% C.I. 1.396-4.161) were associated with a increased risk of KC in Chinese Han patients. This study showed that rs2071376, rs1143627 and rs16944 had significant differences in associations between KC patients and the control group when different genotypes were analyzed in three models (dominant, recessive, and additive). In the haplotype analysis, the two single nucleotide polymorphisms (SNPs), rs1143627 and rs16944 showed strong linkage disequilibrium. In addition, Haplotype "ACA" was found to be associated with a higher risk of developing KC (OR = 12.91, p < 0.001). Keratocyte apoptosis is an initiating event in the pathogenesis of KC which could be induced by the altered levels of IL1 gene. These findings confirmed that polymorphisms in IL1 genes were associated with risk of KC in the Chinese Han population, which help us to gain insight into the pathogenesis of KC.

Efficacy of a Newly Designed Cephalometric Analysis Software for McNamara Analysis in Comparison with Dolphin Software.

PubMed

Nouri, Mahtab; Hamidiaval, Shadi; Akbarzadeh Baghban, Alireza; Basafa, Mohammad; Fahim, Mohammad

2015-01-01

Cephalometric norms of McNamara analysis have been studied in various populations due to their optimal efficiency. Dolphin cephalometric software greatly enhances the conduction of this analysis for orthodontic measurements. However, Dolphin is very expensive and cannot be afforded by many clinicians in developing countries. A suitable alternative software program in Farsi/English will greatly help Farsi speaking clinicians. The present study aimed to develop an affordable Iranian cephalometric analysis software program and compare it with Dolphin, the standard software available on the market for cephalometric analysis. In this diagnostic, descriptive study, 150 lateral cephalograms of normal occlusion individuals were selected in Mashhad and Qazvin, two major cities of Iran mainly populated with Fars ethnicity, the main Iranian ethnic group. After tracing the cephalograms, the McNamara analysis standards were measured both with Dolphin and the new software. The cephalometric software was designed using Microsoft Visual C++ program in Windows XP. Measurements made with the new software were compared with those of Dolphin software on both series of cephalograms. The validity and reliability were tested using intra-class correlation coefficient. Calculations showed a very high correlation between the results of the Iranian cephalometric analysis software and Dolphin. This confirms the validity and optimal efficacy of the newly designed software (ICC 0.570-1.0). According to our results, the newly designed software has acceptable validity and reliability and can be used for orthodontic diagnosis, treatment planning and assessment of treatment outcome.

26 CFR 1.937-3 - Income effectively connected with the conduct of a trade or business in a possession.

Code of Federal Regulations, 2013 CFR

2013-04-01

... bona fide resident of Possession I, a section 931 possession (as defined in § 1.931-1(c)(1)). X has an... specialized computer software. A purchaser of software will frequently pay X an additional amount to install the software on the purchaser's operating system and to ensure that the software is functioning...

26 CFR 1.937-3 - Income effectively connected with the conduct of a trade or business in a possession.

Code of Federal Regulations, 2012 CFR

2012-04-01

... bona fide resident of Possession I, a section 931 possession (as defined in § 1.931-1(c)(1)). X has an... specialized computer software. A purchaser of software will frequently pay X an additional amount to install the software on the purchaser's operating system and to ensure that the software is functioning...

26 CFR 1.937-3 - Income effectively connected with the conduct of a trade or business in a possession.

Code of Federal Regulations, 2011 CFR

2011-04-01

... bona fide resident of Possession I, a section 931 possession (as defined in § 1.931-1(c)(1)). X has an... specialized computer software. A purchaser of software will frequently pay X an additional amount to install the software on the purchaser's operating system and to ensure that the software is functioning...

26 CFR 1.937-3 - Income effectively connected with the conduct of a trade or business in a possession.

Code of Federal Regulations, 2014 CFR

2014-04-01

... bona fide resident of Possession I, a section 931 possession (as defined in § 1.931-1(c)(1)). X has an... specialized computer software. A purchaser of software will frequently pay X an additional amount to install the software on the purchaser's operating system and to ensure that the software is functioning...

Frequency distribution of polymorphisms of CYP2C19, CYP2C9, VKORC1 and SLCO1B1 genes in the Yakut population.

PubMed

Vasilyev, Filipp Filippovich; Danilova, Diana Aleksandrovna; Kaimonov, Vladimir Sergeevich; Chertovskih, Yana Valerievna; Maksimova, Nadezda Romanovna

2016-01-01

Allele frequencies of single nucleotide polymorphisms (SNPs) are variable among different populations; therefore the study of SNPs in ethnic groups is important for establishing the clinical significance of the screening of these polymorphisms. The main goal of the research is to study the polymorphisms of CYP2C9, CYP2C19, VKORC1, and SLCO1B1 in Yakuts. Genomic DNA from 229 Yakut subjects were analyzed by real-time polymerase chain reaction (PCR) (SLCO1B1 +521T > C, VKORC1 -1639G>A, CYP2C19 +681G>A, +636G>A, CYP2C9 +430С>T, +1075A>C). Genotype frequencies of polymorphisms in the population of the Yakuts were more characteristic of the Asian population. The results have been included in the software application "Lekgen" that we developed for the interpretation of pharmacogenetic testing. The data of our study obtained on frequency carriers of polymorphisms of genes SLCO1B1, CYP2C19, CYP2C9, VKORC1 among the Yakuts may be useful in developing recommendations for a personalized therapy.

Frequency distribution of polymorphisms of CYP2C19, CYP2C9, VKORC1 and SLCO1B1 genes in the Yakut population

PubMed Central

Vasilyev, Filipp Filippovich; Danilova, Diana Aleksandrovna; Kaimonov, Vladimir Sergeevich; Chertovskih, Yana Valerievna; Maksimova, Nadezda Romanovna

2016-01-01

Allele frequencies of single nucleotide polymorphisms (SNPs) are variable among different populations; therefore the study of SNPs in ethnic groups is important for establishing the clinical significance of the screening of these polymorphisms. The main goal of the research is to study the polymorphisms of CYP2C9, CYP2C19, VKORC1, and SLCO1B1 in Yakuts. Genomic DNA from 229 Yakut subjects were analyzed by real-time polymerase chain reaction (PCR) (SLCO1B1 +521T > C, VKORC1 -1639G>A, CYP2C19 +681G>A, +636G>A, CYP2C9 +430С>T, +1075A>C). Genotype frequencies of polymorphisms in the population of the Yakuts were more characteristic of the Asian population. The results have been included in the software application “Lekgen” that we developed for the interpretation of pharmacogenetic testing. The data of our study obtained on frequency carriers of polymorphisms of genes SLCO1B1, CYP2C19, CYP2C9, VKORC1 among the Yakuts may be useful in developing recommendations for a personalized therapy. PMID:27499796

OHD/HL - National Weather Hydrology Laboratory

Science.gov Websites

resources and services. Design and Programming Standards and Guidelines General Programming C C++ FORTRAN Java v 2.0 updated 3/28/2008 Java v 1.9 Korn and Bash Shell Software Design Phase Guidelines OHD Design Specification Template OHD Design Specification Example Software Peer Review Guidelines and Checklists Software

PINT, a New Pulsar Timing Software

NASA Astrophysics Data System (ADS)

Luo, Jing; Jenet, Fredrick A.; Ransom, Scott M.; Demorest, Paul; Van Haasteren, Rutger; Archibald, Anne

2015-01-01

We are presenting a new pulsar timing software PINT. The current pulsar timing group are heavily depending on Tempo/Tempo2, a package for analysis pulsar data. However, for a high accuracy pulsar timing related project, such as pulsar timing for gravitational waves, an alternative software is needed for the purpose of examing the results. We are developing a Tempo independent software with a different structure. Different modules is designed to be more isolated and easier to be expanded. Instead of C, we are using Python as our programming language for the advantage of flexibility and powerful docstring. Here, we are presenting the detailed design and the first result of the software.

Model-Based GN and C Simulation and Flight Software Development for Orion Missions beyond LEO

NASA Technical Reports Server (NTRS)

Odegard, Ryan; Milenkovic, Zoran; Henry, Joel; Buttacoli, Michael

2014-01-01

For Orion missions beyond low Earth orbit (LEO), the Guidance, Navigation, and Control (GN&C) system is being developed using a model-based approach for simulation and flight software. Lessons learned from the development of GN&C algorithms and flight software for the Orion Exploration Flight Test One (EFT-1) vehicle have been applied to the development of further capabilities for Orion GN&C beyond EFT-1. Continuing the use of a Model-Based Development (MBD) approach with the Matlab®/Simulink® tool suite, the process for GN&C development and analysis has been largely improved. Furthermore, a model-based simulation environment in Simulink, rather than an external C-based simulation, greatly eases the process for development of flight algorithms. The benefits seen by employing lessons learned from EFT-1 are described, as well as the approach for implementing additional MBD techniques. Also detailed are the key enablers for improvements to the MBD process, including enhanced configuration management techniques for model-based software systems, automated code and artifact generation, and automated testing and integration.

Fullrmc, a rigid body Reverse Monte Carlo modeling package enabled with machine learning and artificial intelligence.

PubMed

Aoun, Bachir

2016-05-05

A new Reverse Monte Carlo (RMC) package "fullrmc" for atomic or rigid body and molecular, amorphous, or crystalline materials is presented. fullrmc main purpose is to provide a fully modular, fast and flexible software, thoroughly documented, complex molecules enabled, written in a modern programming language (python, cython, C and C++ when performance is needed) and complying to modern programming practices. fullrmc approach in solving an atomic or molecular structure is different from existing RMC algorithms and software. In a nutshell, traditional RMC methods and software randomly adjust atom positions until the whole system has the greatest consistency with a set of experimental data. In contrast, fullrmc applies smart moves endorsed with reinforcement machine learning to groups of atoms. While fullrmc allows running traditional RMC modeling, the uniqueness of this approach resides in its ability to customize grouping atoms in any convenient way with no additional programming efforts and to apply smart and more physically meaningful moves to the defined groups of atoms. In addition, fullrmc provides a unique way with almost no additional computational cost to recur a group's selection, allowing the system to go out of local minimas by refining a group's position or exploring through and beyond not allowed positions and energy barriers the unrestricted three dimensional space around a group. © 2016 Wiley Periodicals, Inc.

Identifying strengths and weaknesses of Quality Management Unit University of Sumatera Utara software using SCAMPI C

NASA Astrophysics Data System (ADS)

Gunawan, D.; Amalia, A.; Rahmat, R. F.; Muchtar, M. A.; Siregar, I.

2018-02-01

Identification of software maturity level is a technique to determine the quality of the software. By identifying the software maturity level, the weaknesses of the software can be observed. As a result, the recommendations might be a reference for future software maintenance and development. This paper discusses the software Capability Level (CL) with case studies on Quality Management Unit (Unit Manajemen Mutu) University of Sumatera Utara (UMM-USU). This research utilized Standard CMMI Appraisal Method for Process Improvement class C (SCAMPI C) model with continuous representation. This model focuses on activities for developing quality products and services. The observation is done in three process areas, such as Project Planning (PP), Project Monitoring and Control (PMC), and Requirements Management (REQM). According to the measurement of software capability level for UMM-USU software, turns out that the capability level for the observed process area is in the range of CL1 and CL2. Planning Project (PP) is the only process area which reaches capability level 2, meanwhile, PMC and REQM are still in CL 1 or in performed level. This research reveals several weaknesses of existing UMM-USU software. Therefore, this study proposes several recommendations for UMM-USU to improve capability level for observed process areas.

Security System Software

NASA Technical Reports Server (NTRS)

1993-01-01

C Language Integration Production System (CLIPS), a NASA-developed expert systems program, has enabled a security systems manufacturer to design a new generation of hardware. C.CURESystem 1 Plus, manufactured by Software House, is a software based system that is used with a variety of access control hardware at installations around the world. Users can manage large amounts of information, solve unique security problems and control entry and time scheduling. CLIPS acts as an information management tool when accessed by C.CURESystem 1 Plus. It asks questions about the hardware and when given the answer, recommends possible quick solutions by non-expert persons.

C-C1-04: Building a Health Services Information Technology Research Environment

PubMed Central

Gehrum, David W; Jones, JB; Romania, Gregory J; Young, David L; Lerch, Virginia R; Bruce, Christa A; Donkochik, Diane; Stewart, Walter F

2010-01-01

Background: The electronic health record (EHR) has opened a new era for health services research (HSR) where information technology (IT) is used to re-engineer care processes. While the EHR provides one means of advancing novel solutions, a promising strategy is to develop tools (e.g., online questionnaires, visual display tools, decision support) distinct from, but which interact with, the EHR. Development of such software tools outside the EHR offers an advantage in flexibility, sophistication, and ultimately in portability to other settings. However, institutional IT departments have an imperative to protect patient data and to standardize IT processes to ensure system-level security and support traditional business needs. Such imperatives usually present formidable process barriers to testing novel software solutions. We describe how, in collaboration with our IT department, we are creating an environment and a process that allows for routine and rapid testing of novel software solutions. Methods: We convened a working group consisting of IT and research personnel with expertise in information security, database design/management, web design, EHR programming, and health services research. The working group was tasked with developing a research IT environment to accomplish two objectives: maintain network/ data security and regulatory compliance; allow researchers working with external vendors to rapidly prototype and, in a clinical setting, test web-based tools. Results: Two parallel solutions, one focused on hardware, the second on oversight and management, were developed. First, we concluded that three separate, staged development environments were required to allow external vendor access for testing software and for transitioning software to be used in a clinic. In parallel, the extant oversight process for approving/managing access to internal/external personnel had to be altered to reflect the scope and scale of discrete research projects, as opposed to an enterpriselevel approach to IT management. Conclusions: Innovation in health services software development requires a flexible, scalable IT environment adapted to the unique objectives of a HSR software development model. In our experience, implementing the hardware solution is less challenging than the cultural change required to implement such a model and the modifications to administrative and oversight processes to sustain an environment for rapid product development and testing.

Ambulatory glucose profile analysis of the juvenile diabetes research foundation continuous glucose monitoring dataset-Applications to the pediatric diabetes population.

PubMed

Forlenza, Gregory P; Pyle, Laura L; Maahs, David M; Dunn, Timothy C

2017-11-01

Increased continuous glucose monitor (CGM) use presents both the benefit and burden of increased data for clinicians to rapidly analyze. The ambulatory glucose profile (AGP) is an evolving a universal software report for CGM data analysis. We utilized the Juvenile Diabetes Research Foundation-CGM dataset to evaluate the AGP across a broad spectrum of patients to show how AGP can be used clinically to assist with CGM-related decision making. We hypothesized that AGP metrics would be different across age and HbA1c strata. AGPs were generated from the JDRF-CGM trial dataset for all periods during which there were ≥10 days of CGM coverage in the 2 weeks adjacent to an HbA1c measurement yielding 1101 AGPs for 393 unique subjects. AGPs were stratified by age group (8-14, 15-24, and ≥25 years) and HbA1c (within or above target for age) and compared for between group differences in AGP metrics via two-factor ANOVA. Glycemic differences between time periods were analyzed via segmented regression analysis. Glucose exposure (average and estimated A1c) and variability (standard deviation and interquartile range) were different between the low and high HbA1c levels. Within a given HbA1c level all age groups were significantly different from each other with older patients having lower averages with less variability than younger patients. AGP analysis of the JDRF-CGM data highlights significant differences in glycemic profiles between pediatric and adult age groups and between well and less well-controlled patient populations. © 2016 John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.

Interleukin-1 alpha variation is associated with the risk of developing preeclampsia.

PubMed

Ghasemi, Masoumeh; Kashani, Elham; Fayyaz, Azadeh; Attar, Marzieh; Shahbazi, Majid

2015-10-01

Preeclampsia is a syndrome that affects 5% of all pregnancies, producing substantial maternal and prenatal morbidity and mortality. Several studies have reported that cytokine genes are associated with the persistence of preeclampsia or the severity of the disease. The aim of this study is to investigate the relationships between the polymorphisms of interleukin-1 alpha-889 (IL-1A) gene and preeclampsia. Genomic DNA was extracted from the peripheral blood of 305 patients with preeclampsia and 325 normal controls from Sayyad Shirazi Hospital of Golestan University. Then subjected to SSP-PCR amplification. STATA software and the chi square test were used for statistic calculations. The frequencies of IL-1A -889 genotypes C/C, T/T and C/T in preeclampsia cases were 34.8%, 8.2%, 57% and in controls were 20.9%, 7.6% and 71.3% respectively. There was a significant 1.5 fold excess frequency in genotype C/C in cases (CI=1.44-3.07, OR=2.1, P=0.0001). There was a significant difference in the frequencies of alleles or genotypes in IL-1A promoter regions between patients with preeclampsia and the control group. Turkomans showed the highest frequency of the C allele and Sistanies had the lowest frequency of the C allele in preeclampsia compared to control groups (CI=1.5-3.9, OR=2.48, P=0.0001). Our findings suggest that the IL-1A-899C/C genotype and C allele are associated with susceptibility to preeclampsia. Copyright © 2015 Elsevier Ireland Ltd. All rights reserved.

The effect of electroacupuncture on postoperative immunoinflammatory response in patients undergoing supratentorial craniotomy

PubMed Central

LI, GUOYAN; LI, SHUQIN; WANG, BAOGUO; AN, LIXIN

2013-01-01

The aim of this study was to explore the effect of electroacupuncture (EA) on immune function in patients undergoing supratentorial craniotomy. We also examined whether point specificity in EA was present. The study involved 29 patients undergoing craniotomy. The patients were divided into three groups: a control (C, n=10), an EA (A, n=9) and a sham acupoints group (S, n=10). Blood samples were collected at the following time points: before anesthesia (T0), 4 h after the induction of anesthesia (T1), 1 day post-surgery (T2) and 2 days post-surgery (T3) to determine the levels of tumor necrosis factor-α (TNF-α), interleukin-8 (IL-8), interleukin-10 (IL-10), immunoglobulin M (IgM), IgA and IgG. Data were analyzed using SPSS 13.0 software. When comparing the levels of cytokines following surgery, we observed that the peripheral blood IL-8 levels in groups A and S were increased significantly compared with those of group C at 1 and 2 days after surgery. When comparing immunoglobulin levels after surgery, we established that the peripheral blood IgA levels in group C had decreased significantly compared to those of group A and group S 4 h after induction of anesthesia and 1 day after surgery. However, there was no significant difference between group A and group S. Compared with simple general anesthesia, acupuncture combined with anesthesia partially reduces immune suppression in the perioperative periods under the same conditions as the simple general anesthesia. Point specificity in EA was not present. PMID:24137250

[Development of ophthalmologic software for handheld devices].

PubMed

Grottone, Gustavo Teixeira; Pisa, Ivan Torres; Grottone, João Carlos; Debs, Fernando; Schor, Paulo

2006-01-01

The formulas for calculation of intraocular lenses have evolved since the first theoretical formulas by Fyodorov. Among the second generation formulas, the SRK-I formula has a simple calculation, taking into account a calculation that only involved anteroposterior length, IOL constant and average keratometry. With the evolution of those formulas, complexicity increased making the reconfiguration of parameters in special situations impracticable. In this way the production and development of software for such a purpose, can help surgeons to recalculate those values if needed. To idealize, develop and test a Brazilian software for calculation of IOL dioptric power for handheld computers. For the development and programming of software for calculation of IOL, we used PocketC program (OrbWorks Concentrated Software, USA). We compared the results collected from a gold-standard device (Ultrascan/Alcon Labs) with the simulation of 100 fictitious patients, using the same IOL parameters. The results were grouped for ULTRASCAN data and SOFTWARE data. Using SRK/T formula the range of those parameters included a keratometry varying between 35 and 55D, axial length between 20 and 28 mm, IOL constants of 118.7, 118.3 and 115.8. Using Wilcoxon test, it was shown that the groups do not differ (p=0.314). We had a variation in the Ultrascan sample between 11.82 and 27.97. In the tested program sample the variation was practically similar (11.83-27.98). The average of the Ultrascan group was 20.93. The software group had a similar average. The standard deviation of the samples was also similar (4.53). The precision of IOL software for handheld devices was similar to that of the standard devices using the SRK/T formula. The software worked properly, was steady without bugs in tested models of operational system.

Serum cystatin C levels in preterm newborns in our setting: Correlation with serum creatinine and preterm pathologies.

PubMed

Bardallo Cruzado, Leonor; Pérez González, Elena; Martínez Martos, Zoraima; Bermudo Guitarte, Carmen; Granero Asencio, Mercedes; Luna Lagares, Salud; Marín Patón, Mariano; Polo Padilla, Juan

2015-01-01

Cystatin C (CysC) is a renal function marker that is not as influenced as creatinine (Cr) by endogenous or exogenous agents, so it is therefore proposed as a marker in preterm infants. To determine serum CysC values in preterm infants during the first week of life, compared to Cr. To analyze alterations caused by prematurity diseases. The design involved a longitudinal, observational study of prospective cohorts. Groups were based on gestational age (GA): Group A (24-27 weeks), Group B (28-33 weeks), Group C (34-36 weeks). Blood samples were collected at birth, within 48-72hours and after 7 days of life. SPSS v.20 software was used. The statistical methods applied included chi-squared test and ANOVA. A total of 109 preterm infants were included in the study. CysC levels were: 1.54mg/L (±0.28) at birth; 1.38mg/L (±0.36) within 48-72hours of life; 1.50mg/L (±0.31) after 7 days (p<0.05). Cr levels were: 0.64mg/dL (±0.17) at birth; 0.64mg/dL (±0.28) within 48-72hours; 0.56mg/dL (±0.19) after 7 days (P<.05). CysC values were lower in hypotensive patients and those with a respiratory disease (P<.05), and no alterations associated with other diseases were observed. There were no differences in Cr levels associated with any disease. Creatinine levels were higher in patients ≤1.500g (P<.05). Serum CysC decreased within 48-72hours of life, and this decline showed significance (P<.05). The levels increased after 7 days in all 3 GA groups, and there was no difference in CysC levels among the groups. More studies in preterm infants with hypotension and respiratory disease are required. CysC is a better glomerular filtration (GF) marker in ≤1.500g preterm infants. Copyright © 2015 The Authors. Published by Elsevier España, S.L.U. All rights reserved.

Participant experiences in a smartphone-based health coaching intervention for type 2 diabetes: A qualitative inquiry.

PubMed

Pludwinski, Sarah; Ahmad, Farah; Wayne, Noah; Ritvo, Paul

2016-04-01

We investigated the experience of individuals diagnosed with type 2 diabetes mellitus (T2DM) who participated in an intervention in which the key elements were the provision of a smartphone and self-monitoring software. The interviews focused on use of a smartphone and the effects on motivation for health behavior change. This was a qualitative evaluation of participants in a larger T2DM self-management randomized controlled trial (RCT) conducted at the Black Creek Community Health Centre (BCCHC) in Toronto, Canada (ClinicalTrials.gov Identifier: NCT02036892). The study is based on semi-structured interviews (n = 11) that were audio taped and analyzed with a thematic analytic approach. The RCT compared the effectiveness of six months of smartphone-based self-monitoring and health coaching with a control group who received health coaching without internet or smartphone-based assistance. Qualitative data analyses resulted in derivation of four major themes that describe participant experience: (a) 'smartphone and software', describes smartphone use in relation to health behavior change; (b) 'health coach' describes how client/health coach relationships were assisted by smartphone use; (c) 'overall experience' describes perceptions of the overall intervention; and (d) 'frustrations in managing chronic conditions' describes difficulties with the complexities of T2DM management from a patient perspective. Findings suggest that interventions with T2DM assisted by smartphone software and health coaches actively engage individuals in improved hemoglobin A1c (HbA1c) control. © The Author(s) 2015.

Device USB interface and software development for electric parameter measuring instrument

NASA Astrophysics Data System (ADS)

Li, Deshi; Chen, Jian; Wu, Yadong

2003-09-01

Aimed at general devices development, this paper discussed the development of USB interface and software development. With an example, using PDIUSBD12 which support parallel interface, the paper analyzed its technical characteristics. Designed different interface circuit with 80C52 singlechip microcomputer and TMS320C54 series digital signal processor, analyzed the address allocation, register access. According to USB1.1 standard protocol, designed the device software and application layer protocol. The paper designed the data exchange protocol, and carried out system functions.

Evaluation of bond strength of resin cements using different general-purpose statistical software packages for two-parameter Weibull statistics.

PubMed

Roos, Malgorzata; Stawarczyk, Bogna

2012-07-01

This study evaluated and compared Weibull parameters of resin bond strength values using six different general-purpose statistical software packages for two-parameter Weibull distribution. Two-hundred human teeth were randomly divided into 4 groups (n=50), prepared and bonded on dentin according to the manufacturers' instructions using the following resin cements: (i) Variolink (VAN, conventional resin cement), (ii) Panavia21 (PAN, conventional resin cement), (iii) RelyX Unicem (RXU, self-adhesive resin cement) and (iv) G-Cem (GCM, self-adhesive resin cement). Subsequently, all specimens were stored in water for 24h at 37°C. Shear bond strength was measured and the data were analyzed using Anderson-Darling goodness-of-fit (MINITAB 16) and two-parameter Weibull statistics with the following statistical software packages: Excel 2011, SPSS 19, MINITAB 16, R 2.12.1, SAS 9.1.3. and STATA 11.2 (p≤0.05). Additionally, the three-parameter Weibull was fitted using MNITAB 16. Two-parameter Weibull calculated with MINITAB and STATA can be compared using an omnibus test and using 95% CI. In SAS only 95% CI were directly obtained from the output. R provided no estimates of 95% CI. In both SAS and R the global comparison of the characteristic bond strength among groups is provided by means of the Weibull regression. EXCEL and SPSS provided no default information about 95% CI and no significance test for the comparison of Weibull parameters among the groups. In summary, conventional resin cement VAN showed the highest Weibull modulus and characteristic bond strength. There are discrepancies in the Weibull statistics depending on the software package and the estimation method. The information content in the default output provided by the software packages differs to very high extent. Copyright © 2012 Academy of Dental Materials. Published by Elsevier Ltd. All rights reserved.

A-7E Software Module Guide.

DTIC Science & Technology

1981-12-08

o 14 A& B:2.1 Function Driver Module.. ..... .... 14’ ’: B:2.2 Shared Services Module . . . o o . 0 -15 M’ 5:3 Software Decision Module...2.1.13 Weapon Release Functions... ........24 C:2.l.14 Ground Test Functions .. ........... 24 C:2.2 Shared Services Module Decomposition. ........24 C...Driver (FD) Module supported by a Shared Services (SS) Module. B:2.1 FUNCTION DRIVER MODULE The Function Driver Module consists of a set of individual

Computational methods in sequence and structure prediction

NASA Astrophysics Data System (ADS)

Lang, Caiyi

This dissertation is organized into two parts. In the first part, we will discuss three computational methods for cis-regulatory element recognition in three different gene regulatory networks as the following: (a) Using a comprehensive "Phylogenetic Footprinting Comparison" method, we will investigate the promoter sequence structures of three enzymes (PAL, CHS and DFR) that catalyze sequential steps in the pathway from phenylalanine to anthocyanins in plants. Our result shows there exists a putative cis-regulatory element "AC(C/G)TAC(C)" in the upstream of these enzyme genes. We propose this cis-regulatory element to be responsible for the genetic regulation of these three enzymes and this element, might also be the binding site for MYB class transcription factor PAP1. (b) We will investigate the role of the Arabidopsis gene glutamate receptor 1.1 (AtGLR1.1) in C and N metabolism by utilizing the microarray data we obtained from AtGLR1.1 deficient lines (antiAtGLR1.1). We focus our investigation on the putatively co-regulated transcript profile of 876 genes we have collected in antiAtGLR1.1 lines. By (a) scanning the occurrence of several groups of known abscisic acid (ABA) related cisregulatory elements in the upstream regions of 876 Arabidopsis genes; and (b) exhaustive scanning of all possible 6-10 bps motif occurrence in the upstream regions of the same set of genes, we are able to make a quantative estimation on the enrichment level of each of the cis-regulatory element candidates. We finally conclude that one specific cis-regulatory element group, called "ABRE" elements, are statistically highly enriched within the 876-gene group as compared to their occurrence within the genome. (c) We will introduce a new general purpose algorithm, called "fuzzy REDUCE1", which we have developed recently for automated cis-regulatory element identification. In the second part, we will discuss our newly devised protein design framework. With this framework we have developed a software package which is capable of designing novel protein structures at the atomic resolution. This software package allows us to perform protein structure design with a flexible backbone. The backbone flexibility includes loop region relaxation as well as a secondary structure collective mode relaxation scheme. (Abstract shortened by UMI.)

Associations between social networks and life satisfaction among older Japanese: Does birth cohort make a difference?

PubMed

Kobayashi, Erika; Liang, Jersey; Sugawara, Ikuko; Fukaya, Taro; Shinkai, Shoji; Akiyama, Hiroko

2015-12-01

Japanese older people experienced drastic changes in family structure and values after World War II at different life stages by birth cohorts. We examined how linkages between different types of social ties and life satisfaction (LS) vary across cohorts, in conjunction with age and survey year differences. Data from face-to-face interviews conducted in 1987, 1999, and 2012 with a nationally representative sample of older Japanese (N = 4,917) were analyzed. The participants were members of 4 birth cohorts (C1: 1901-1912, C2: 1913-1924, C3: 1925-1936, C4: 1937-1949), categorized into 6 groups based on cohort and age at time of measurement (young-old [YO]: 63-74; old-old [OO]: 75-86): C1OO, C2YO, C2OO, C3YO, C3OO, and C4YO. Effects of social networks on LS among the 6 groups were compared simultaneously and separately by gender using the Amos software. There were significant cohort variations in the linkages between family network and LS. The positive association between being married and LS was stronger for later cohorts (C3, C4) among men, whereas that of co-residence with a child and LS was stronger for the earlier cohorts (C1, C2) among women. Moreover, the positive association between meeting with nonfamily members and LS increased from 1987 to 2012 among women, indicating a period effect over a cohort effect. The effects of being married and participation in community groups on LS also changed with age. Our results suggest that linkages between social relations and LS should be interpreted within the context of individual and social changes over time. (c) 2015 APA, all rights reserved).

Iron and Vitamin C Co-Supplementation Increased Serum Vitamin C Without Adverse Effect on Zinc Level in Iron Deficient Female Youth

PubMed Central

Khoshfetrat, Mohammad Reza; Mortazavi, Sima; Neyestani, Tirang; Mahmoodi, Mohammad Reza; Zerafati-Shoae, Nahid; Mohammadi-Nasrabadi, Fatemeh

2014-01-01

Background: Iron supplementation can decrease the absorption of zinc and influence other antioxidants levels such as vitamin C. This study aimed to investigate the effect of iron supplements alone and in combination with vitamin C on zinc and vitamin C status in iron deficient female students. Methods: In a double-blind randomized clinical trail, 60 iron deficient students were selected from 289 volunteers residing in dormitory. After matching, subjects were randomly assigned into two groups: Group I (50 mg elemental iron supplements) and Group II (50 mg elemental iron + 500 mg ascorbic acid). Serum ferritin, iron, serum zinc, and plasma vitamin C concentrations were measured by using enzyme-linked immunosorbent assay, spectrophotometer, atomic absorption spectrometer, and colorimeter, respectively after 6 and 12 weeks supplementation. Student's t-test and repeated measures analysis of variance were applied to analyze the data using SPSS software. Results: Serum zinc levels had no significant differences between 2 groups at the baseline; however, its concentration decreased from 80.9 ± 4.2-68.9 ± 2.7 μg/dl to 81.2 ± 4.5-66.1 ± 2.9 μg/dl (P < 0.001) in Groups I and II, respectively after 6 weeks of supplementation. Continuous supplementation increased serum zinc concentration to baseline levels (79.0 ± 2.9 μg/dl; P < 0.01) in Group I and 70.5 ± 3.1 μg/dl in Group II following 12 weeks of supplementation. Plasma vitamin C increased from 3 ± 0/1-3.3 ± 0.2 mg/dl to 2.7 ± 0. 1-4.2 ± 0.2 mg/dl (P < 0.01) in Groups I and II, respectively. At the end of study, plasma vitamin C significantly increased from 3.3 ± 0.3-4.7 ± 0.3 (P < 0.01) to 4.2 ± 0.2-7.1 ± 0.2 (P < 0.001) in Groups I and II, respectively. Conclusions: Iron supplementation with and without vitamin C led to reduction in serum Zn in iron-deficient female students after 6 weeks. However, the decreasing trend stops after repletion of iron stores and Zn levels returned to the approximately baseline values after 12 weeks. PMID:25489453

Software Management Metrics

DTIC Science & Technology

1988-05-01

obtained from Dr. Barry Boehm’s Software 5650, Contract No. F19628-86-C-O001, Engineering Economics [1] and from T. J. ESD/MITRE Software Center Acquisition...of References 1. Boehm, Barry W., SoJtware Engineering 3. Halstead, M. H., Elements of SoJhtare Economics, Englewood Cliffs, New Science, New York...1983, pp. 639-648. 35 35 - Bibliography Beizer, B., Software System Testing and Pressman , Roger S., Software Engineering:QualtyO Assurance, New York: Van

Randomized comparative evaluation of endoscopic submucosal dissection self-learning software in France and Japan.

PubMed

Pioche, Mathieu; Rivory, Jérôme; Nishizawa, Toshihiro; Uraoka, Toshio; Touzet, Sandrine; O'Brien, Marc; Saurin, Jean-Christophe; Ponchon, Thierry; Denis, Angélique; Yahagi, Naohisa

2016-12-01

Background and study aim: Endoscopic submucosal dissection (ESD) is currently the reference method to achieve an en bloc resection for large lesions; however, the technique is difficult and risky, with a long learning curve. In order to reduce the morbidity, training courses that use animal models are recommended. Recently, self-learning software has been developed to assist students in their training. The aim of this study was to evaluate the impact of this tool on the ESD learning curve. Methods: A prospective, randomized, comparative study enrolled 39 students who were experienced in interventional endoscopy. Each student was randomized to one of two groups and performed 30 ESDs of 30 mm standardized lesions in a bovine colon model. The software group used the self-learning software whereas the control group only observed an ESD procedure video. The primary outcome was the rate of successful ESD procedures, defined as complete en bloc resection without any perforation and performed in less than 75 minutes. Results: A total of 39 students performed 1170 ESDs. Success was achieved in 404 (70.9 %) in the software group and 367 (61.2 %) in the control group ( P  = 0.03). Among the successful procedures, there were no significant differences between the software and control groups in terms of perforation rate (22 [4.0 %] vs. 29 [5.1 %], respectively; P  = 0.27) and mean (SD) procedure duration (34.1 [13.4] vs. 32.3 [14.0] minutes, respectively; P  = 0.52). For the 30th procedure, the rate of complete resection was superior in the software group (84.2 %) compared with the control group (50.0 %; P  = 0.01). Conclusion: ESD self-learning software was effective in improving the quality of resection compared with a standard teaching method using procedure videos. This result suggests the benefit of incorporating such software into teaching programs. © Georg Thieme Verlag KG Stuttgart · New York.

15 CFR 734.4 - De minimis U.S. content.

Code of Federal Regulations, 2014 CFR

2014-01-01

... this paragraph. (1) The U.S. origin commodities or software, if controlled under ECCNs 5A002.a.1, .a.2... controlled U.S.-origin commodities or “bundled” with U.S.-origin software valued at 10% or less of the total value of the foreign-made commodity; Notes to paragraph (c)(1): (1) U.S.-origin software is not eligible...

[Relationship between periodontitis and levels of high-sensitivity C-reactive protein].

PubMed

Pan, Heng-biao; Chen, Hui; Zhou, Na; Jin, Dan; Zhang, Jing; Peng, Chun-mei

2010-08-01

To evaluate the relationship between periodontitis and the traditional risk factors of coronary heart disease (CHD), as well as the role in the mechanisms responsible for high-sensitivity C-reactive protein (hsCRP) in the relationship of peridontitis and CHD. A periodontal examination was conducted on a total of 356 subjects, and community periodontal index of treatment needs (CPITN) was obtained from each subject. Periodontal status was categorized into TN < or =2, TN=3, TN=4 three groups according to the CPITN indexes. Fasting venous blood samples were collected from all the three group subjects, the serum hsCRP concentration and serological changes used in diagnosing CHD routinely were determined, and software of SPSS 16.0 were used to analyzed the relationship of periodontal, hsCRP concentration and routinely CHD serological indexes. In the groups of TN < or =2, TN=3 and TN=4, the hsCRP level was (1.10 +/- 1.16), (1.86 +/- 2.34), (2.25 +/- 2.75) mg x L(-1), respectively. Compared with Group TN < or =2, the concentration of hsCRP in Group TN=3 and TN=4 were higher (OR = 1.24, OR = 1.31, respectively). Compared with group hsCRP < 3.0 mg x L(-1), more calculus and deep periodontal pockets were found in the Group hsCRP > or = 3.0 mg x L(-1) (P < 0.05). The serum hsCRP level is correlated with the severity of periodontal disease.

Loran-C flight test software

NASA Technical Reports Server (NTRS)

Nickum, J. D.

1978-01-01

The software package developed for the KIM-1 Micro-System and the Mini-L PLL receiver to simplify taking flight test data is described along with the address and data bus buffers used in the KIM-1 Micro-system. The interface hardware and timing are also presented to describe completely the software programs.

15 CFR 734.4 - De minimis U.S. content.

Code of Federal Regulations, 2011 CFR

2011-01-01

... section and the requirements of this paragraph. (1) The U.S. origin commodities or software, if controlled... controlled U.S.-origin commodities or “bundled” with U.S.-origin software valued at 10% or less of the total value of the foreign-made commodity; Notes to paragraph (c)(1): (1) U.S.-origin software is not eligible...

Genetic linkage map of the interspecific grape rootstock cross Ramsey (Vitis champinii) x Riparia Gloire (Vitis riparia).

PubMed

Lowe, K M; Walker, M A

2006-05-01

The first genetic linkage map of grape derived from rootstock parents was constructed using 188 progeny from a cross of Ramsey (Vitis champinii) x Riparia Gloire (V. riparia). Of 354 simple sequence repeat markers tested, 205 were polymorphic for at least one parent, and 57.6% were fully informative. Maps of Ramsey, Riparia Gloire, and the F1 population were created using JoinMap software, following a pseudotestcross strategy. The set of 205 SSRs allowed for the identification of all 19 Vitis linkage groups (2n=38), with a total combined map length of 1,304.7 cM, averaging 6.8 cM between markers. The maternal map consists of 172 markers aligned into 19 linkage groups (1,244.9 cM) while 126 markers on the paternal map cover 18 linkage groups (1,095.5 cM). The expected genome coverage is over 92%. Segregation distortion occurred in the Ramsey, Riparia Gloire, and consensus maps for 10, 13, and 16% of the markers, respectively. These distorted markers clustered primarily on the linkage groups 3, 5, 14 and 17. No genome-wide difference in recombination rate was observed between Ramsey and Riparia Gloire based on 315 common marker intervals. Fifty-four new Vitis-EST-derived SSR markers were mapped, and were distributed evenly across the genome on 16 of the 19 linkage groups. These dense linkage maps of two phenotypically diverse North American Vitis species are valuable tools for studying the genetics of many rootstock traits including nematode resistance, lime and salt tolerance, and ability to induce vigor.

Quantitative evaluation of liver cirrhosis using T1 relaxation time with 3 tesla MRI before and after oxygen inhalation.

PubMed

Kim, Kyung Ah; Park, Mi-Suk; Kim, In-Seong; Kiefer, Berthold; Chung, Woo-Suk; Kim, Myeong-Jin; Kim, Ki Whang

2012-08-01

To quantify liver T1 relaxation times before and after oxygen inhalation in patients with and without liver cirrhosis using a 3 Tesla (T) MRI. Institutional Review Board approval and written informed consent were obtained. Ninety-two noncirrhotic patients and 87 patients with hepatitis B viral liver cirrhosis (72 Child-Pugh class A and 15 Child-Pugh class B or C) underwent MRI with a 3.0T system before and after the supply of 100% oxygen at a rate of 15 L/min by means of a nonrebreather ventilation mask for 3 min. T1 maps were acquired using three-dimensional spoiled gradient echo sequences with two different flip angles (2° and 14°) and a fixed TR/TE (2.54 ms/0.95 ms). Liver T1 values were obtained using a T1 processing tool (MapIT software). The mean baseline T1 values of three groups (control, Child-Pugh class A, and Child-Pugh class B/C) were compared using an analysis of variance test. Liver T1 value before and after oxygenation was compared using a paired t-test for each group. The baseline liver T1 value was significantly higher in the control group (941 ± 136 ms) than in Child-Pugh A (858 ± 143 ms) and Child-Pugh B/C (783 ± 164 ms) group (P < 0.001 and P < 0.0001). The reduction in the liver T1 value after oxygen inhalation was significant in the control group (P = 0.012) but not significant in Child-Pugh class A (P = 0.079) and Child-Pugh class B/C (P = 0.752). The baseline liver T1 relaxation time was significantly different between the patients with and without liver cirrhosis. The shortening effect of oxygen on the liver T1 value was significant in the control group but not in the cirrhotic patients. Copyright © 2012 Wiley Periodicals, Inc.

Software Design Document GT Real-Time Software Host CSCI (9B). Volume 1, Sections 1.0 - 2.12.19.2

DTIC Science & Technology

1991-06-01

78 2.4.2.8 bOsig-frame-rate.c ............................. 79 2.4.2.9 bO- database -info.c.............................. 79...93 2.4.3 Ballistics Database Interaction ......................................... 94 2.4.3.1 bxbvolintc... database -disable................................ 417 2.12.6.11 _handle-.point-lights ............................. 418 2.12.6.12 _-reset~model-Wpinters

WMAP C&DH Software

NASA Technical Reports Server (NTRS)

Cudmore, Alan; Leath, Tim; Ferrer, Art; Miller, Todd; Walters, Mark; Savadkin, Bruce; Wu, Ji-Wei; Slegel, Steve; Stagmer, Emory

2007-01-01

The command-and-data-handling (C&DH) software of the Wilkinson Microwave Anisotropy Probe (WMAP) spacecraft functions as the sole interface between (1) the spacecraft and its instrument subsystem and (2) ground operations equipment. This software includes a command-decoding and -distribution system, a telemetry/data-handling system, and a data-storage-and-playback system. This software performs onboard processing of attitude sensor data and generates commands for attitude-control actuators in a closed-loop fashion. It also processes stored commands and monitors health and safety functions for the spacecraft and its instrument subsystems. The basic functionality of this software is the same of that of the older C&DH software of the Rossi X-Ray Timing Explorer (RXTE) spacecraft, the main difference being the addition of the attitude-control functionality. Previously, the C&DH and attitude-control computations were performed by different processors because a single RXTE processor did not have enough processing power. The WMAP spacecraft includes a more-powerful processor capable of performing both computations.

Software Past, Present, and Future: Views from Government, Industry and Academia

NASA Technical Reports Server (NTRS)

Holcomb, Lee; Page, Jerry; Evangelist, Michael

2000-01-01

Views from the NASA CIO NASA Software Engineering Workshop on software development from the past, present, and future are presented. The topics include: 1) Software Past; 2) Software Present; 3) NASA's Largest Software Challenges; 4) 8330 Software Projects in Industry Standish Groups 1994 Report; 5) Software Future; 6) Capability Maturity Model (CMM): Software Engineering Institute (SEI) levels; 7) System Engineering Quality Also Part of the Problem; 8) University Environment Trends Will Increase the Problem in Software Engineering; and 9) NASA Software Engineering Goals.

15 CFR 740.17 - Encryption commodities, software and technology (ENC).

Code of Federal Regulations, 2011 CFR

2011-01-01

... classified under ECCN 5B002, and equivalent or related software and technology classified under ECCNs 5D002... service in any country listed in Country Group E:1 in supplement No. 1 to part 740 of the EAR, or release of source code or technology to any national of a country listed in Country Group E:1. Reexports and...

The Effect of Software Reusability on Information Theory Based Software Metrics

DTIC Science & Technology

1990-01-01

of plans across programming languages and application areas, only a brief abstract treatment of non-contiguous "program parts" is mentioned in the...info->num = linenum; CA6 if(*info->text) W. if(find(linenum)) C.8 patchup(linenum, 1); /*fix up old line numbers*/ 107 C.9 if(*info->text) C-10 start

Advanced Communications Technology Satellite high burst rate link evaluation terminal experiment control and monitor software maintenance manual, version 1.0

NASA Technical Reports Server (NTRS)

Reinhart, Richard C.

1992-01-01

The Experiment Control and Monitor (EC&M) software was developed at NASA Lewis Research Center to support the Advanced Communications Technology Satellite (ACTS) High Burst Rate Link Evaluation Terminal (HBR-LET). The HBR-LET is an experimenter's terminal to communicate with the ACTS for various investigations by government agencies, universities, and industry. The EC&M software is one segment of the Control and Performance Monitoring (C&PM) software system of the HBR-LET. The EC&M software allows users to initialize, control, and monitor the instrumentation within the HBR-LET using a predefined sequence of commands. Besides instrument control, the C&PM software system is also responsible for computer communication between the HBR-LET and the ACTS NASA Ground Station and for uplink power control of the HBR-LET to demonstrate power augmentation during rain fade events. The EC&M Software User's Guide, Version 1.0 (NASA-CR-189160) outlines the commands required to install and operate the EC&M software. Input and output file descriptions, operator commands, and error recovery procedures are discussed in the document. The EC&M Software Maintenance Manual, Version 1.0 (NASA-CR-189161) is a programmer's guide that describes current implementation of the EC&M software from a technical perspective. An overview of the EC&M software, computer algorithms, format representation, and computer hardware configuration are included in the manual.

A Roadmap for using Agile Development in a Traditional System

NASA Technical Reports Server (NTRS)

Streiffert, Barbara; Starbird, Thomas

2006-01-01

I. Ensemble Development Group: a) Produces activity planning software for in spacecraft; b) Built on Eclipse Rich Client Platform (open source development and runtime software); c) Funded by multiple sources including the Mars Technology Program; d) Incorporated the use of Agile Development. II. Next Generation Uplink Planning System: a) Researches the Activity Planning and Sequencing Subsystem for Mars Science Laboratory (APSS); b) APSS includes Ensemble, Activity Modeling, Constraint Checking, Command Editing and Sequencing tools plus other uplink generation utilities; c) Funded by the Mars Technology Program; d) Integrates all of the tools for APSS.

Seven Processes that Enable NASA Software Engineering Technologies

NASA Technical Reports Server (NTRS)

Housch, Helen; Godfrey, Sally

2011-01-01

This slide presentation reviews seven processes that NASA uses to ensure that software is developed, acquired and maintained as specified in the NPR 7150.2A requirement. The requirement is to ensure that all software be appraised for the Capability Maturity Model Integration (CMMI). The enumerated processes are: (7) Product Integration, (6) Configuration Management, (5) Verification, (4) Software Assurance, (3) Measurement and Analysis, (2) Requirements Management and (1) Planning & Monitoring. Each of these is described and the group(s) that are responsible is described.

A User’s Guide for the Software Technology Economic Impact Model

DTIC Science & Technology

1991-10-01

Copy 16 oft22 oples U AD-A248 023 \\\\1\\\\\\i\\~\\1\\1\\\\1\\1\\11\\\\\\l~ IDA DOCUMENT D-971 E Tt USER’S GUIDE FOR THE SOFTWARE TECHNOLOGY ECONOMIC IMPACT MODEL I... studied , and they are released by the President of IDA. Group Reports Group Reports record the findings and results of IDA established working groups and...the senior individuals responsible for the project and others as selected by IDA to ensure their high quality and relevance to the problems studied

Randomized controlled within-subject evaluation of digital and conventional workflows for the fabrication of lithium disilicate single crowns. Part II: CAD-CAM versus conventional laboratory procedures.

PubMed

Sailer, Irena; Benic, Goran I; Fehmer, Vincent; Hämmerle, Christoph H F; Mühlemann, Sven

2017-07-01

Clinical studies are needed to evaluate the entire digital and conventional workflows in prosthetic dentistry. The purpose of the second part of this clinical study was to compare the laboratory production time for tooth-supported single crowns made with 4 different digital workflows and 1 conventional workflow and to compare these crowns clinically. For each of 10 participants, a monolithic crown was fabricated in lithium disilicate-reinforced glass ceramic (IPS e.max CAD). The computer-aided design and computer-aided manufacturing (CAD-CAM) systems were Lava C.O.S. CAD software and centralized CAM (group L), Cares CAD software and centralized CAM (group iT), Cerec Connect CAD software and lab side CAM (group CiL), and Cerec Connect CAD software with centralized CAM (group CiD). The conventional fabrication (group K) included a wax pattern of the crown and heat pressing according to the lost-wax technique (IPS e.max Press). The time for the fabrication of the casts and the crowns was recorded. Subsequently, the crowns were clinically evaluated and the corresponding treatment times were recorded. The Paired Wilcoxon test with the Bonferroni correction was applied to detect differences among treatment groups (α=.05). The total mean (±standard deviation) active working time for the dental technician was 88 ±6 minutes in group L, 74 ±12 minutes in group iT, 74 ±5 minutes in group CiL, 92 ±8 minutes in group CiD, and 148 ±11 minutes in group K. The dental technician spent significantly more working time for the conventional workflow than for the digital workflows (P<.001). No statistically significant differences were found between group L and group CiD or between group iT and group CiL. No statistical differences in time for the clinical evaluation were found among groups, indicating similar outcomes (P>.05). Irrespective of the CAD-CAM system, the overall laboratory working time for a digital workflow was significantly shorter than for the conventional workflow, since the dental technician needed less active working time. Copyright © 2016 Editorial Council for the Journal of Prosthetic Dentistry. Published by Elsevier Inc. All rights reserved.

Project W-211, initial tank retrieval systems, retrieval control system software configuration management plan

DOE Office of Scientific and Technical Information (OSTI.GOV)

RIECK, C.A.

1999-02-23

This Software Configuration Management Plan (SCMP) provides the instructions for change control of the W-211 Project, Retrieval Control System (RCS) software after initial approval/release but prior to the transfer of custody to the waste tank operations contractor. This plan applies to the W-211 system software developed by the project, consisting of the computer human-machine interface (HMI) and programmable logic controller (PLC) software source and executable code, for production use by the waste tank operations contractor. The plan encompasses that portion of the W-211 RCS software represented on project-specific AUTOCAD drawings that are released as part of the C1 definitive designmore » package (these drawings are identified on the drawing list associated with each C-1 package), and the associated software code. Implementation of the plan is required for formal acceptance testing and production release. The software configuration management plan does not apply to reports and data generated by the software except where specifically identified. Control of information produced by the software once it has been transferred for operation is the responsibility of the receiving organization.« less

Three-dimensional image study on the vascular structure after angiopoietin-1 transduction in isolated mouse pancreatic islets

NASA Astrophysics Data System (ADS)

He, Jing; Su, Dongming; Trucco, Massimo

2008-02-01

Angiopoietin-1 (Ang-1) is essential for remodeling the primitive vascular plexus during embryonic development and for reducing plasma leakage in inflammation of adult vasculature. However, the role for Ang-1 in maintenance of vascular stability in isolated pancreatic islets is not fully understood. In this study, we compared the difference of vascular morphology between Ang-1 treated (n=5) and control mouse islets (n=5) using both two- and three-dimensional optical image analysis. Isolated mouse islets were transduced with Ang-1 or Lac Z (control) vector at 37°C for 16 hours. Islets were incubated with both rat anti-CD31 antibody and rabbit anti-insulin antibody followed by incubation with Rhodamine-conjugated goat anti-rat IgG and Alexa-488 conjugated goat anti-rabbit IgG. Islets were viewed under a Nikon confocal microscope. Serial optical section images were captured and reconstructed using Nikon EZ-C1 software. Individual two-D and reconstructed three-D images were analyzed using MetaMorph Image Analysis software. Islet vascular density was determined. In two-D images, there was no significant difference of vascular density between the two groups. The vascular morphology didn't show any obvious differences in two-D images either. However, in the three-D images, we found higher vascular density and more vascular branches in the Ang-1 transducted islets and vascular dilation in control group. In conclusion, using three-D image analysis, Ang-1 displayed functions in maintenance of vascular stability and in stimulating growth of vascular branches in isolated mouse pancreatic islets. In order to study further the regeneration of different cell contents in the spherical pancreatic islet, three-D image analysis is an effective method to approach this goal.

The efficiency of child formula dentifrices containing different calcium and phosphate compounds on artificial enamel caries.

PubMed

Rirattanapong, Praphasri; Vongsavan, Kadkao; Saengsirinavin, Chavengkiat; Khumsub, Ploychompoo

2016-01-01

Fluoride toothpaste has been extensively used to prevent dental caries. However, the risk of fluorosis is concerning, especially in young children. Calcium phosphate has been an effective remineralizing agent and is present in commercial dental products, with no risk of fluorosis to users. This in vitro study aimed to compare the effects of different calcium phosphate compounds and fluoride-containing dentifrices on artificial caries in primary teeth. Fifty sound primary incisors were coated with nail varnish, leaving two 1 mm 2 windows on the labial surface before immersion in demineralizing solution for 96 hours to produce artificial enamel lesions. Subsequently, one window from each tooth was coated with nail varnish, and all 50 teeth were divided into five groups ( n = 10); group A - deionized water; group B - casein phosphopeptide-amorphous calcium phosphate (CPP-ACP) paste (Tooth Mousse); group C - 500 ppm F (Colgate Spiderman ® ); group D - nonfluoridated toothpaste with triple calcium phosphate (Pureen ® ); and group E - tricalcium phosphate (TCP). Polarized light microscopy and Image-Pro ® Plus software were used to evaluate lesions. After a 7-day pH-cycle, mean lesion depths in groups A, B, C, D, and E had increased by 57.52 ± 10.66%, 33.28 ± 10.16%, 17.04 ± 4.76%, 32.51 ± 8.99%, and 21.76 ± 8.15%, respectively. All data were processed by the Statistical Package for the Social Sciences (version 16.0) software package. Comparison of percentage changes using one-way analysis of variance and Fisher's least squares difference tests at a 95% level of confidence demonstrated that group A was significantly different from the other groups ( P < 0.001). Lesions in groups B and D had a significant lesion progression when compared with groups C and E. All toothpastes in this study had the potential to delay the demineralization progression of artificial enamel caries in primary teeth. The fluoride 500 ppm and TCP toothpastes were equal in the deceleration of enamel caries progression and better than CPP-ACP paste and TCP toothpaste.

The efficiency of child formula dentifrices containing different calcium and phosphate compounds on artificial enamel caries

PubMed Central

Rirattanapong, Praphasri; Vongsavan, Kadkao; Saengsirinavin, Chavengkiat; Khumsub, Ploychompoo

2016-01-01

Objectives: Fluoride toothpaste has been extensively used to prevent dental caries. However, the risk of fluorosis is concerning, especially in young children. Calcium phosphate has been an effective remineralizing agent and is present in commercial dental products, with no risk of fluorosis to users. This in vitro study aimed to compare the effects of different calcium phosphate compounds and fluoride-containing dentifrices on artificial caries in primary teeth. Materials and Methods: Fifty sound primary incisors were coated with nail varnish, leaving two 1 mm2 windows on the labial surface before immersion in demineralizing solution for 96 hours to produce artificial enamel lesions. Subsequently, one window from each tooth was coated with nail varnish, and all 50 teeth were divided into five groups (n = 10); group A – deionized water; group B – casein phosphopeptide–amorphous calcium phosphate (CPP–ACP) paste (Tooth Mousse); group C – 500 ppm F (Colgate Spiderman®); group D – nonfluoridated toothpaste with triple calcium phosphate (Pureen®); and group E – tricalcium phosphate (TCP). Polarized light microscopy and Image-Pro® Plus software were used to evaluate lesions. Results: After a 7-day pH-cycle, mean lesion depths in groups A, B, C, D, and E had increased by 57.52 ± 10.66%, 33.28 ± 10.16%, 17.04 ± 4.76%, 32.51 ± 8.99%, and 21.76 ± 8.15%, respectively. All data were processed by the Statistical Package for the Social Sciences (version 16.0) software package. Comparison of percentage changes using one-way analysis of variance and Fisher's least squares difference tests at a 95% level of confidence demonstrated that group A was significantly different from the other groups (P < 0.001). Lesions in groups B and D had a significant lesion progression when compared with groups C and E. Conclusions: All toothpastes in this study had the potential to delay the demineralization progression of artificial enamel caries in primary teeth. The fluoride 500 ppm and TCP toothpastes were equal in the deceleration of enamel caries progression and better than CPP–ACP paste and TCP toothpaste. PMID:28032049

cFE/CFS (Core Flight Executive/Core Flight System)

NASA Technical Reports Server (NTRS)

Wildermann, Charles P.

2008-01-01

This viewgraph presentation describes in detail the requirements and goals of the Core Flight Executive (cFE) and the Core Flight System (CFS). The Core Flight Software System is a mission independent, platform-independent, Flight Software (FSW) environment integrating a reusable core flight executive (cFE). The CFS goals include: 1) Reduce time to deploy high quality flight software; 2) Reduce project schedule and cost uncertainty; 3) Directly facilitate formalized software reuse; 4) Enable collaboration across organizations; 5) Simplify sustaining engineering (AKA. FSW maintenance); 6) Scale from small instruments to System of Systems; 7) Platform for advanced concepts and prototyping; and 7) Common standards and tools across the branch and NASA wide.

Artificial intelligence against breast cancer (A.N.N.E.S-B.C.-Project).

PubMed

Parmeggiani, Domenico; Avenia, Nicola; Sanguinetti, Alessandro; Ruggiero, Roberto; Docimo, Giovanni; Siciliano, Mattia; Ambrosino, Pasquale; Madonna, Imma; Peltrini, Roberto; Parmeggiani, Umberto

2012-01-01

Our preliminary study examined the development of an advanced innovative technology with the objectives of--developing methodologies and algorithms for a Artificial Neural Network (ANN) system, improving mammography and ultra-sonography images interpretation;--creating autonomous software as a diagnostic tool for the physicians, allowing the possibility for the advanced application of databases using Artificial Intelligence (Expert System). Since 2004 550 F patients over 40 yrs old were divided in two groups: 1) 310 pts underwent echo every 6 months and mammography every year by expert radiologists. 2) 240 pts had the same screening program and were also examined by our diagnosis software, developed with ANN-ES technology by the Engineering Aircraft Research Project team. The information was continually updated and returned to the Expert System, defining the principal rules of automatic diagnosis. In the second group we selected: Expert radiologist decision; ANN-ES decision; Expert radiologists with ANN-ES decision. The second group had significantly better diagnosis for cancer and better specificity for breast lesions risk as well as the highest percentage account when the radiologist's decision was helped by the ANN software. The ANN-ES group was able to select, by anamnestic, diagnostic and genetic means, 8 patients for prophylactic surgery, finding 4 cancers in a very early stage. Although it is only a preliminary study, this innovative diagnostic tool seems to provide better positive and negative predictive value in cancer diagnosis as well as in breast risk lesion identification.

Fullrmc, a rigid body reverse monte carlo modeling package enabled with machine learning and artificial intelligence

DOE PAGES

Aoun, Bachir

2016-01-22

Here, a new Reverse Monte Carlo (RMC) package ‘fullrmc’ for atomic or rigid body and molecular, amorphous or crystalline materials is presented. fullrmc main purpose is to provide a fully modular, fast and flexible software, thoroughly documented, complex molecules enabled, written in a modern programming language (python, cython ,C and C++ when performance is needed) and complying to modern programming practices. fullrmc approach in solving an atomic or molecular structure is different from existing RMC algorithms and software. In a nutshell, traditional RMC methods and software randomly adjust atom positions until the whole system has the greatest consistency with amore » set of experimental data. In contrast, fullrmc applies smart moves endorsed with reinforcement machine learning to groups of atoms. While fullrmc allows running traditional RMC modelling, the uniqueness of this approach resides in its ability to customize grouping atoms in any convenient way with no additional programming efforts and to apply smart and more physically meaningful moves to the defined groups of atoms. Also fullrmc provides a unique way with almost no additional computational cost to recur a group’s selection, allowing the system to go out of local minimas by refining a group’s position or exploring through and beyond not allowed positions and energy barriers the unrestricted three dimensional space around a group.« less

Fullrmc, a rigid body reverse monte carlo modeling package enabled with machine learning and artificial intelligence

DOE Office of Scientific and Technical Information (OSTI.GOV)

Aoun, Bachir

Here, a new Reverse Monte Carlo (RMC) package ‘fullrmc’ for atomic or rigid body and molecular, amorphous or crystalline materials is presented. fullrmc main purpose is to provide a fully modular, fast and flexible software, thoroughly documented, complex molecules enabled, written in a modern programming language (python, cython ,C and C++ when performance is needed) and complying to modern programming practices. fullrmc approach in solving an atomic or molecular structure is different from existing RMC algorithms and software. In a nutshell, traditional RMC methods and software randomly adjust atom positions until the whole system has the greatest consistency with amore » set of experimental data. In contrast, fullrmc applies smart moves endorsed with reinforcement machine learning to groups of atoms. While fullrmc allows running traditional RMC modelling, the uniqueness of this approach resides in its ability to customize grouping atoms in any convenient way with no additional programming efforts and to apply smart and more physically meaningful moves to the defined groups of atoms. Also fullrmc provides a unique way with almost no additional computational cost to recur a group’s selection, allowing the system to go out of local minimas by refining a group’s position or exploring through and beyond not allowed positions and energy barriers the unrestricted three dimensional space around a group.« less

48 CFR 252.227-7019 - Validation of asserted restrictions-Computer software.

Code of Federal Regulations, 2010 CFR

2010-10-01

... restrictions-Computer software. 252.227-7019 Section 252.227-7019 Federal Acquisition Regulations System...—Computer software. As prescribed in 227.7104(e)(3) or 227.7203-6(c), use the following clause: Validation of Asserted Restrictions—Computer Software (JUN 1995) (a) Definitions. (1) As used in this clause...

48 CFR 252.227-7019 - Validation of asserted restrictions-Computer software.

Code of Federal Regulations, 2011 CFR

2011-10-01

... restrictions-Computer software. 252.227-7019 Section 252.227-7019 Federal Acquisition Regulations System...—Computer software. As prescribed in 227.7104(e)(3) or 227.7203-6(c), use the following clause: Validation of Asserted Restrictions—Computer Software (SEP 2011) (a) Definitions. (1) As used in this clause...

48 CFR 252.227-7019 - Validation of asserted restrictions-Computer software.

Code of Federal Regulations, 2012 CFR

2012-10-01

... restrictions-Computer software. 252.227-7019 Section 252.227-7019 Federal Acquisition Regulations System...—Computer software. As prescribed in 227.7104(e)(3) or 227.7203-6(c), use the following clause: Validation of Asserted Restrictions—Computer Software (SEP 2011) (a) Definitions. (1) As used in this clause...

48 CFR 252.227-7019 - Validation of asserted restrictions-Computer software.

Code of Federal Regulations, 2014 CFR

2014-10-01

... restrictions-Computer software. 252.227-7019 Section 252.227-7019 Federal Acquisition Regulations System...—Computer software. As prescribed in 227.7104(e)(3) or 227.7203-6(c), use the following clause: Validation of Asserted Restrictions—Computer Software (SEP 2011) (a) Definitions. (1) As used in this clause...

48 CFR 252.227-7019 - Validation of asserted restrictions-Computer software.

Code of Federal Regulations, 2013 CFR

2013-10-01

... restrictions-Computer software. 252.227-7019 Section 252.227-7019 Federal Acquisition Regulations System...—Computer software. As prescribed in 227.7104(e)(3) or 227.7203-6(c), use the following clause: Validation of Asserted Restrictions—Computer Software (SEP 2011) (a) Definitions. (1) As used in this clause...

Advanced communications technology satellite high burst rate link evaluation terminal experiment control and monitor software user's guide, version 1.0

NASA Technical Reports Server (NTRS)

Reinhart, Richard C.

1992-01-01

The Experiment Control and Monitor (EC&M) software was developed at NASA Lewis Research Center to support the Advanced Communications Technology Satellite (ACTS) High Burst Rate Link Evaluation Terminal (HBR-LET). The HBR-LET is an experimenter's terminal to communicate with the ACTS for various investigations by government agencies, universities, and industry. The EC&M software is one segment of the Control and Performance Monitoring (C&PM) software system of the HBR-LET. The EC&M software allows users to initialize, control, and monitor the instrumentation within the HBR-LET using a predefined sequence of commands. Besides instrument control, the C&PM software system is also responsible for computer communication between the HBR-LET and the ACTS NASA Ground Station and for uplink power control of the HBR-LET to demonstrate power augmentation during rain fade events. The EC&M Software User's Guide, Version 1.0 (NASA-CR-189160) outlines the commands required to install and operate the EC&M software. Input and output file descriptions, operator commands, and error recovery procedures are discussed in the document.

48 CFR 27.404-1 - Unlimited rights data.

Code of Federal Regulations, 2011 CFR

2011-10-01

... software). (b) Form, fit, and function data delivered under contract. (c) Data (except as may be included with restricted computer software) that constitute manuals or instructional and training material for... rights data or restricted computer software (see 27.404-2). ...

48 CFR 27.404-1 - Unlimited rights data.

Code of Federal Regulations, 2013 CFR

2013-10-01

... software). (b) Form, fit, and function data delivered under contract. (c) Data (except as may be included with restricted computer software) that constitute manuals or instructional and training material for... rights data or restricted computer software (see 27.404-2). ...

[Pharmacokinetic interaction of pioglitazone hydrochloride and atorvastatin calcium in Beagle dogs].

PubMed

Chen, He-Li; Zhang, Wen-Ping; Yang, Fu-Ying; Wang, Xin-Yu; Yang, Wen-Cheng; Dang, Hong-Wan

2013-05-01

The object of this study is to investigate the pharmacokinetic interaction of pioglitazone hydrochloride and atorvastatin calcium in healthy adult Beagle dogs following single and multiple oral dose administration. A randomized, cross-over study was conducted with nine healthy adult Beagle dogs assigned to three groups. Each group was arranged to take atorvastatin calcium (A), pioglitazone hydrochloride (B), atorvastatin calcium and pioglitazone hydrochloride (C) orally in the first period, to take B, C, A in the second period, and to take C, A, B in the third period for 6 days respectively. The blood samples were collected at the first and the sixth day after the administration, plasma drug concentrations were determined by LC-MS/MS, a one-week wash-out period was needed between each period. The pharmacokinetic parameters of drug combination group and the drug alone group were calculated by statistical moment method, calculation of C(max) and AUC(0-t) was done by using 90% confidence interval method of the bioequivalence and bioavailability degree module DAS 3.2.1 software statistics. Compared with the separate administration, the main pharmacokinetic parameters (C(max) and AUC(0-t)) of joint use of pioglitazone hydrochloride and atorvastatin calcium within 90% confidence intervals for bioequivalence statistics were unqualified, the mean t(max) with standard deviation used paired Wilcoxon test resulted P > 0.05. There was no significant difference within t1/2, CL(int), MRT, V/F. Pioglitazone hydrochloride and atorvastatin calcium had pharmacokinetic interaction in healthy adult Beagle dogs.

ORA User’s Guide 2007

DTIC Science & Technology

2007-07-01

July 2007 CMU-ISRI-07-115 Institute for Software Research School of Computer Science Carnegie Mellon University Pittsburgh, PA 15213...ORA uses a Java interface for ease of use, and a C++ computational backend. The current version ORA1.2 software is available on the CASOS website...06-1-0104, N00014-06-1-0921, the AFOSR for “ Computational Modeling of Cultural Dimensions in Adversary Organization (MURI)”, the ARL for Assessing C2

Methodology for Software Reliability Prediction. Volume 1.

DTIC Science & Technology

1987-11-01

SPACECRAFT 0 MANNED SPACECRAFT B ATCH SYSTEM AIRBORNE AVIONICS 0 UNMANNED EVENT C014TROL a REAL TIME CLOSED 0 UNMANNED SPACECRAFT LOOP OPERATINS SPACECRAFT...software reliability. A Software Reliability Measurement Framework was established which spans the life cycle of a software system and includes the...specification, prediction, estimation, and assessment of software reliability. Data from 59 systems , representing over 5 million lines of code, were

Temporal HbA1c patterns amongst patients with type 2 diabetes referred for specialist care: Data from the S4S-DINGO-Diabetes Informatics Group.

PubMed

Lam, Teresa; Hoffman, David M; Cukier, Kimberly; Darnell, David; Greenfield, Jerry R; Harrison, Natalie; Hng, Tien-Ming; Morrow, Anthony F; Cheung, N Wah

2016-06-01

To evaluate the achievement of HbA1c targets in patients with type 2 diabetes mellitus in specialist practice. This audit was undertaken by members of the S4S Diabetes Informatics Group (DINGO), a consortium of Australian endocrinologists in private practice who contribute de-identified data from their electronic medical record, Audit 4 (Software 4 Specialists, S4S, Australia & New Zealand) for audit purposes. Data from patients with type 2 diabetes was extracted. Inclusion criteria were: initial age<70years, baseline HbA1c>7% (53mmol/mol), with at least another HbA1c recorded in the next 2years, and a minimum of 2years follow-up. Data was analysed using a linear mixed effects model. Of the 4796 patients in the dataset with type 2 diabetes mellitus, 1379 patients fulfilled inclusion criteria. The median age at initial consultation was 57 (49-64)years. The median baseline HbA1c was 8.7 (7.8-9.8)% (72mmol/mol). There was a 1.0% reduction in HbA1c to 7.7 (7.1-8.6)% (61mmol/mol) (p<0.0001) in the first 3-6months following referral, after which there were no further changes. The initial reduction was maintained with minimal loss of control at 4years. By 3-6months, 24% of patients achieved the target HbA1c. Referral of patients with type 2 diabetes to an endocrinologist reduces HbA1c, and the effect is sustained over the medium term; however only a minority of patients reach targets. Copyright © 2016 Elsevier Ireland Ltd. All rights reserved.

Open Source Software Development

DTIC Science & Technology

2011-01-01

Software, 2002, 149(1), 3-17. 3. DiBona , C., Cooper, D., and Stone, M. (Eds.), Open Sources 2.0, 2005, O’Reilly Media, Sebastopol, CA. Also see, C... DiBona , S. Ockman, and M. Stone (Eds.). Open Sources: Vocides from the Open Source Revolution, 1999. O’Reilly Media, Sebastopol, CA. 4. Ducheneaut, N

Facilitating the analysis of the multifocal electroretinogram using the free software environment R.

PubMed

Bergholz, Richard; Rossel, Mirjam; Dutescu, Ralf M; Vöge, Klaas P; Salchow, Daniel J

2018-01-01

The large amount of data rendered by the multifocal electroretinogram (mfERG) can be analyzed and visualized in various ways. The evaluation and comparison of more than one examination is time-consuming and prone to create errors. Using the free software environment R we developed a solution to average the data of multiple examinations and to allow a comparison of different patient groups. Data of single mfERG recordings as exported in .csv format from a RETIport 21 system (version 7/03, Roland Consult) or manually compiled .csv files are the basis for the calculations. The R software extracts response densities and implicit times of N1 and P1 for the sum response, each ring eccentricity, and each single hexagon. Averages can be calculated for as many subjects as needed. The mentioned parameters can then be compared to another group of patients or healthy subjects. Application of the software is illustrated by comparing 11 patients with chloroquine maculopathy to a control group of 7 healthy subjects. The software scripts display response density and implicit time 3D plots of each examination as well as of the group averages. Differences of the group averages are presented as 3D and grayscale 2D plots. Both groups are compared using the t-test with Bonferroni correction. The group comparison is furthermore illustrated by the average waveforms and by boxplots of each eccentricity. This software solution on the basis of the programming language R facilitates the clinical and scientific use of the mfERG and aids in interpretation and analysis.

Software And Systems Engineering Risk Management

DTIC Science & Technology

2010-04-01

RSKM 2004 COSO Enterprise RSKM Framework 2006 ISO/IEC 16085 Risk Management Process 2008 ISO/IEC 12207 Software Lifecycle Processes 2009 ISO/IEC...1 Software And Systems Engineering Risk Management John Walz VP Technical and Conferences Activities, IEEE Computer Society Vice-Chair Planning...Software & Systems Engineering Standards Committee, IEEE Computer Society US TAG to ISO TMB Risk Management Working Group Systems and Software

Real-time fluoroscopic needle guidance in the interventional radiology suite using navigational software for percutaneous bone biopsies in children.

PubMed

Shellikeri, Sphoorti; Setser, Randolph M; Hwang, Tiffany J; Srinivasan, Abhay; Krishnamurthy, Ganesh; Vatsky, Seth; Girard, Erin; Zhu, Xiaowei; Keller, Marc S; Cahill, Anne Marie

2017-07-01

Navigational software provides real-time fluoroscopic needle guidance for percutaneous procedures in the Interventional Radiology (IR) suite. We describe our experience with navigational software for pediatric percutaneous bone biopsies in the IR suite and compare technical success, diagnostic accuracy, radiation dose and procedure time with that of CT-guided biopsies. Pediatric bone biopsies performed using navigational software (Syngo iGuide, Siemens Healthcare) from 2011 to 2016 were prospectively included and anatomically matched CT-guided bone biopsies from 2008 to 2016 were retrospectively reviewed with institutional review board approval. C-arm CT protocols used for navigational software-assisted cases included institution-developed low-dose (0.1/0.17 μGy/projection), regular-dose (0.36 μGy/projection), or a combination of low-dose/regular-dose protocols. Estimated effective radiation dose and procedure times were compared between software-assisted and CT-guided biopsies. Twenty-six patients (15 male; mean age: 10 years) underwent software-assisted biopsies (15 pelvic, 7 lumbar and 4 lower extremity) and 33 patients (13 male; mean age: 9 years) underwent CT-guided biopsies (22 pelvic, 7 lumbar and 4 lower extremity). Both modality biopsies resulted in a 100% technical success rate. Twenty-five of 26 (96%) software-assisted and 29/33 (88%) CT-guided biopsies were diagnostic. Overall, the effective radiation dose was significantly lower in software-assisted than CT-guided cases (3.0±3.4 vs. 6.6±7.7 mSv, P=0.02). The effective dose difference was most dramatic in software-assisted cases using low-dose C-arm CT (1.2±1.8 vs. 6.6±7.7 mSv, P=0.001) or combined low-dose/regular-dose C-arm CT (1.9±2.4 vs. 6.6±7.7 mSv, P=0.04), whereas effective dose was comparable in software-assisted cases using regular-dose C-arm CT (6.0±3.5 vs. 6.6±7.7 mSv, P=0.7). Mean procedure time was significantly lower for software-assisted cases (91±54 vs. 141±68 min, P=0.005). In our experience, navigational software technology in the IR suite is a promising alternative to CT guidance for pediatric bone biopsies providing comparable technical success and diagnostic accuracy with lower radiation dose and procedure time, in addition to providing real-time fluoroscopic needle guidance.

Psychological collectivism: a measurement validation and linkage to group member performance.

PubMed

Jackson, Christine L; Colquitt, Jason A; Wesson, Michael J; Zapata-Phelan, Cindy P

2006-07-01

The 3 studies presented here introduce a new measure of the individual-difference form of collectivism. Psychological collectivism is conceptualized as a multidimensional construct with the following 5 facets: preference for in-groups, reliance on in-groups, concern for in-groups, acceptance of in-group norms, and prioritization of in-group goals. Study 1 developed and tested the new measure in a sample of consultants. Study 2 cross-validated the measure using an alumni sample of a Southeastern university, assessing its convergent validity with other collectivism measures. Study 3 linked scores on the measure to 4 dimensions of group member performance (task performance, citizenship behavior, counterproductive behavior, and withdrawal behavior) in a computer software firm and assessed discriminant validity using the Big Five. The results of the studies support the construct validity of the measure and illustrate the potential value of collectivism as a predictor of group member performance. ((c) 2006 APA, all rights reserved).

[The clinical values of VEMP in the diagnosis of vestibular nerve impairment in the patients with type 2 diabetes mellitus].

PubMed

Su, Juan; Zhang, Jing; Wang, Mingxin; Zhou, Huifang

2015-12-01

To explore the values of vestibular evoked myogenic potential (VEMP) in the diagnosis of vestibular nerve impairment in type 2 diabetes mellitus patients. Forty-two cases (84 ears) of diabetes mellitus patients and 42 cases (84 ears) normal subjects as the control group were enrolled from 2014 to 2015.Both the patients and normal subjects underwent conventional air-conducted ocular vestibular evoked myogenic potential (oVEMP) and cervical vestibular evoked myogenic potential (cVEMP) in bilateral ears.The results were compared between the patients and normal subjects. A commercially available software package, SPSS19.0, was used for statistical analysis. In 84 ears of the normal subjects, oVEMP was present in 70 ears, the educible rate was 83.3% (70/84). cVEMP was present in 74 ears, and the educible rate was 88.1% (74/84). In 84 ears of the diabetes mellitus patients, oVEMP was present in 49 ears, with the educible rate of 58.3% (49/84). cVEMP was present in 52 ears, with the educible rate of 61.9% (52/84). The educible rate in the control group was significantly higher than the diabetic group (oVEMP: χ(2)=12.71, P<0.05; cVEMP: χ(2)=15.37, P<0.05). In the diabetic group, the mean values of both oVEMP and cVEMP P1, N1 latencies were significantly longer when compared to the control group (P<0.05). No significantly statistical difference was found in oVEMP and cVEMP parameters (threshold, latency interval and amplitude) between groups (P>0.05). Vestibular nerve was impaired in diabetes mellitus patients in some degree. VEMP examinations could be useful in the diagnosis of vestibular nerve impairment in type 2 diabetes mellitus patients.

New software for cervical vertebral geometry assessment and its relationship to skeletal maturation—a pilot study

PubMed Central

Cunha, A R; Júnior, G C; Fernandes, N; Campos, M J S; Costa, L F M; Vitral, R W F; Bolognese, A M

2014-01-01

Objectives: In the present study, we developed new software for quantitative analysis of cervical vertebrae maturation, and we evaluated its applicability through a multinomial logistic regression model (MLRM). Methods: Digitized images of the bodies of the second (C2), third (C3) and fourth (C4) cervical vertebrae were analysed in cephalometric radiographs of 236 subjects (116 boys and 120 girls) by using a software developed for digitized vertebrae analysis. The sample was initially distributed into 11 categories according to the Fishman's skeletal maturity indicators and were then grouped into four stages for quantitative cervical maturational changes (QCMC) analysis (QCMC I, II, III and IV). Seven variables of interest were measured and analysed to identify morphologic alterations of the vertebral bodies in each QCMC category. Results: Statistically significant differences (p < 0.05) were observed among all QCMC categories for the variables analysed. The MLRM used to calculate the probability that an individual belonged to each of the four cervical vertebrae maturation categories was constructed by taking into account gender, chronological age and four variables determined by digitized vertebrae analysis (Ang_C3, MP_C3, MP_C4 and SP_C4). The MLRM presented a predictability of 81.4%. The weighted κ test showed almost perfect agreement (κ = 0.832) between the categories defined initially by the method of Fishman and those allocated by the MLRM. Conclusions: Significant alterations in the morphologies of the C2, C3 and C4 vertebral bodies that were analysed through the digitized vertebrae analysis software occur during the different stages of skeletal maturation. The model that combines the four parameters measured on the vertebral bodies, the age and the gender showed an excellent prediction. PMID:24319125

New software for cervical vertebral geometry assessment and its relationship to skeletal maturation--a pilot study.

PubMed

Santiago, R C; Cunha, A R; Júnior, G C; Fernandes, N; Campos, M J S; Costa, L F M; Vitral, R W F; Bolognese, A M

2014-01-01

In the present study, we developed new software for quantitative analysis of cervical vertebrae maturation, and we evaluated its applicability through a multinomial logistic regression model (MLRM). Digitized images of the bodies of the second (C2), third (C3) and fourth (C4) cervical vertebrae were analysed in cephalometric radiographs of 236 subjects (116 boys and 120 girls) by using a software developed for digitized vertebrae analysis. The sample was initially distributed into 11 categories according to the Fishman's skeletal maturity indicators and were then grouped into four stages for quantitative cervical maturational changes (QCMC) analysis (QCMC I, II, III and IV). Seven variables of interest were measured and analysed to identify morphologic alterations of the vertebral bodies in each QCMC category. Statistically significant differences (p < 0.05) were observed among all QCMC categories for the variables analysed. The MLRM used to calculate the probability that an individual belonged to each of the four cervical vertebrae maturation categories was constructed by taking into account gender, chronological age and four variables determined by digitized vertebrae analysis (Ang_C3, MP_C3, MP_C4 and SP_C4). The MLRM presented a predictability of 81.4%. The weighted κ test showed almost perfect agreement (κ = 0.832) between the categories defined initially by the method of Fishman and those allocated by the MLRM. Significant alterations in the morphologies of the C2, C3 and C4 vertebral bodies that were analysed through the digitized vertebrae analysis software occur during the different stages of skeletal maturation. The model that combines the four parameters measured on the vertebral bodies, the age and the gender showed an excellent prediction.

[Proteomic analysis of myocardial hypertrophy induced by left kidney artery coarctation in rats].

PubMed

Lv, Yuan-yuan; Sun, Biao; Ma, Ji-zheng

2009-05-01

To identify the expression of proteins in cardiomyocytes in rats with left kidney artery coarctation. 16 male SD rats were separated into 2 groups (n=8): 2 kidney 1 Clip group (2K1C) and sham operation group (SO). The postoperational 8th week, after examination by normal doppler and tissue doppler echocardiography, the extracted proteins from cardiomyocytes were isolated by two-dimensional gel electrophoresis with staining. The gel images were acquired by scanner and 2-DE analysis software. Different spots observed on two 2D gels were selected and identified by matrix-assisted laser desorption ionization time-of-flight mass spectrometry (MALDI-TOF-MS). Overall, 21 protein spots showed significant difference, and 14 out of which were identified. Kidney artery coactation-induced cardiac hypertrophy displays different expression of proteins in cardiomyocytes.

Knowledge-Based Software Development Tools

DTIC Science & Technology

1993-09-01

GREEN, C., AND WESTFOLD, S. Knowledge-based programming self-applied. In Machine Intelligence 10, J. E. Hayes, D. Mitchie, and Y. Pao, Eds., Wiley...Technical Report KES.U.84.2, Kestrel Institute, April 1984. [181 KORF, R. E. Toward a model of representation changes. Artificial Intelligence 14, 1...Artificial Intelligence 27, 1 (February 1985), 43-96. Replinted in Readings in Artificial Intelligence and Software Engineering, C. Rich •ad R. Waters

Advanced communications technology satellite high burst rate link evaluation terminal power control and rain fade software test plan, version 1.0

NASA Technical Reports Server (NTRS)

Reinhart, Richard C.

1993-01-01

The Power Control and Rain Fade Software was developed at the NASA Lewis Research Center to support the Advanced Communications Technology Satellite High Burst Rate Link Evaluation Terminal (ACTS HBR-LET). The HBR-LET is an experimenters terminal to communicate with the ACTS for various experiments by government, university, and industry agencies. The Power Control and Rain Fade Software is one segment of the Control and Performance Monitor (C&PM) Software system of the HBR-LET. The Power Control and Rain Fade Software automatically controls the LET uplink power to compensate for signal fades. Besides power augmentation, the C&PM Software system is also responsible for instrument control during HBR-LET experiments, control of the Intermediate Frequency Switch Matrix on board the ACTS to yield a desired path through the spacecraft payload, and data display. The Power Control and Rain Fade Software User's Guide, Version 1.0 outlines the commands and procedures to install and operate the Power Control and Rain Fade Software. The Power Control and Rain Fade Software Maintenance Manual, Version 1.0 is a programmer's guide to the Power Control and Rain Fade Software. This manual details the current implementation of the software from a technical perspective. Included is an overview of the Power Control and Rain Fade Software, computer algorithms, format representations, and computer hardware configuration. The Power Control and Rain Fade Test Plan provides a step-by-step procedure to verify the operation of the software using a predetermined signal fade event. The Test Plan also provides a means to demonstrate the capability of the software.

Advanced communications technology satellite high burst rate link evaluation terminal communication protocol software user's guide, version 1.0

NASA Technical Reports Server (NTRS)

Reinhart, Richard C.

1993-01-01

The Communication Protocol Software was developed at the NASA Lewis Research Center to support the Advanced Communications Technology Satellite High Burst Rate Link Evaluation Terminal (ACTS HBR-LET). The HBR-LET is an experimenters terminal to communicate with the ACTS for various experiments by government, university, and industry agencies. The Communication Protocol Software is one segment of the Control and Performance Monitor (C&PM) Software system of the HBR-LET. The Communication Protocol Software allows users to control and configure the Intermediate Frequency Switch Matrix (IFSM) on board the ACTS to yield a desired path through the spacecraft payload. Besides IFSM control, the C&PM Software System is also responsible for instrument control during HBR-LET experiments, uplink power control of the HBR-LET to demonstrate power augmentation during signal fade events, and data display. The Communication Protocol Software User's Guide, Version 1.0 (NASA CR-189162) outlines the commands and procedures to install and operate the Communication Protocol Software. Configuration files used to control the IFSM, operator commands, and error recovery procedures are discussed. The Communication Protocol Software Maintenance Manual, Version 1.0 (NASA CR-189163, to be published) is a programmer's guide to the Communication Protocol Software. This manual details the current implementation of the software from a technical perspective. Included is an overview of the Communication Protocol Software, computer algorithms, format representations, and computer hardware configuration. The Communication Protocol Software Test Plan (NASA CR-189164, to be published) provides a step-by-step procedure to verify the operation of the software. Included in the Test Plan is command transmission, telemetry reception, error detection, and error recovery procedures.

Tracking Intact Phospholipids and Triacylglycerides in Bering Sea Euphausiids during Two Pulsed Feeding Experiments via Tandem LC-MS

NASA Astrophysics Data System (ADS)

Pleuthner, R. L.; Harvey, H. R.

2016-02-01

In the eastern Bering Sea and Chukchi Sea, Thysanoessa raschii are the most abundant krill species and a keystone trophic component that serves as both an important grazer and link to upper levels consumers including whales. Krill experience large variation in food resources annually and store multiple lipid classes for both reproduction and growth. Two shipboard feeding experiments tested the lipid retention in adult T. raschii and examined the fluctuation of specific lipid biomarkers under food-limited conditions. Phospholipids represent the major structural and storage lipids; their retention as intact phospholipids (IPL), as well as other glycerides (i.e. diacyl- and triacylglycerides; DG and TG), were followed over 19- and 31-day experiments using RPLC ESI-MS/MS on an LTQ Orbitrap XL. Identification and quantification of the suite of phospholipids and associated fatty acids with each experiment was performed with Lipid Search software. IPL's comprised the majority of intact lipids present, most of which had phosphatidylcholine (PC) headgroups; smaller contributions were made by phosphatidylethanolamine (PE) and phosphatidylserine (PS)-contaning IPL's. Fatty acids were largely represented by seven compounds - C14:0n, C16:0n, C16:1(n-7), C18:1(n-7), C18:1(n-9), C20:5(n-3), C22:6(n-3) - and were typically present as mixed acyl groups within each intact lipid class. Concentrations (μmole/g wet weight) of IPL and glyceride lipids showed a decrease of 21% and 26%, respectively, from initial values, suggesting that both are mobilized in times of food scarcity and during overwintering. Structures containing 16:1 decreased most for IPL's, reflecting the absence of the 16:1(n-7) dietary algal fatty acid. This powerful set of analytical and software tools allows determination of the suite of intact lipids within euphausiids to provide a more comprehensive picture of krill structural and storage lipids and their retention during times of varied food availability.

New and Promising: Software Worth a Look. A MicroSIFT Survey of Educational Software Preview Center Coordinators. Volume II, No. 2.

ERIC Educational Resources Information Center

Podany, Zita

This guide lists 19 software packages considered to be worthy of further consideration by other reviewing agencies and schools by a group of 17 computer coordinators from educational software preview centers and evaluation agencies. The following software is listed: (1) ASK-IT, an authoring tool; (2) Balance of the Planet, an environmental…

New and Promising: Software Worth a Look. A MicroSIFT Survey of Educational Software Preview Center Coordinators. Volume II, No. 1.

ERIC Educational Resources Information Center

Podany, Zita

This guide lists 21 software packages considered to be worthy of further consideration by other reviewing agencies and schools by a group of 12 computer coordinators from educational software preview centers and evaluation agencies. These software products have been selected as not being likely to appear in the reviews produced by major software…

[Use of "gelatamp" colloidal silver gelatin sponge to prevent dry socket after extracting mandibular impacted teeth].

PubMed

Wang, Yao-zhong; Guan, Qun-li; Li, Ya-xin; Guo, Ji-lai; Jiang, Ling; Jia, Mu-yun; Deng, Yue

2013-02-01

To study the clinical effect of "gelatamp" colloidal silver gelatin sponge on preventing dry socket after extracting the mandibular impacted teeth. 1350 teeth extracted from 976 patients who needed to extract the mandibular impacted teeth were divided into group A, group B and group C randomly. "Gelatamp" colloidal silver gelatin sponge was implanted into alveolar socket after teeth extraction in group A, with absorbable gelatin sponge was implanted into alveolar socket in group B and nothing was implanted into alveolar socket in group C. The incidence of dry socket was observed, the data was analyzed using SPSS10.0 software package. The incidence of dry socket was 0.44% in group A, 2% in group B and 4.44% in group C. There was significant difference in the incidence of dry socket between group A and group C(P<0.01). There was also significant difference between group B and group C(P<0.05) and between group A and group B(P<0.05). The results demonstrate that "gelatamp" colloidal silver gelatin sponge can prevent the occurrence of dry socket after teeth extraction, which is of wide clinical use.

Associations between Methylenetetrahydrofolate Reductase (MTHFR) Polymorphisms and Non-Alcoholic Fatty Liver Disease (NAFLD) Risk: A Meta-Analysis

PubMed Central

Sun, Man-Yi; Zhang, Li; Shi, Song-Li; Lin, Jing-Na

2016-01-01

Background C677T and A1298C are the most common allelic variants of Methylenetetrahydrofolate Reductase (MTHFR) gene. The association between MTHFR polymorphisms and the occurrence of non-alcoholic fatty liver disease (NAFLD) remains controversial. This study was thus performed to examine whether MTHFR mutations are associated with the susceptibility to NAFLD. Methods A first meta-analysis on the association between the MTHFR polymorphisms and NAFLD risks was carried out via Review Manager 5.0 and Stata/SE 12.0 software. The on-line databases, such as PubMed, EMBASE, CENTRAL, WOS, Scopus and EBSCOhost (updated to April 1st, 2016), were searched for eligible case-control studies. The odd radio (OR), 95% confidence interval (CI) and P value were calculated through Mantel-Haenszel statistics under random- or fixed-effect model. Results Eight articles (785 cases and 1188 controls) contributed data to the current meta-analysis. For C677T, increased NAFLD risks were observed in case group under homozygote model (T/T vs C/C, OR = 1.49, 95% CI = 1.03~2.15, P = 0.04) and recessive model (T/T vs C/C+C/T, OR = 1.42, 95% CI = 1.07~1.88, P = 0.02), but not the other genetics models, compared with control group. For A1298C, significantly increased NAFLD risks were detected in allele model (C vs A, OR = 1.53, 95% CI = 1.13~2.07, P = 0.006), homozygote model (C/C vs A/A, OR = 2.81, 95% CI = 1.63~4.85, P = 0.0002), dominant model (A/C+C/C vs A/A, OR = 1.60, 95% CI = 1.06~2.41, P = 0.03) and recessive model (C/C vs A/A+A/C, OR = 2.08, 95% CI = 1.45~3.00, P<0.0001), but not heterozygote model. Conclusion T/T genotype of MTHFR C677T polymorphism and C/C genotype of MTHFR A1298C are more likely to be associated with the susceptibility to NAFLD. PMID:27128842

Gene expression profiles in rat mesenteric lymph nodes upon supplementation with Conjugated Linoleic Acid during gestation and suckling

PubMed Central

2011-01-01

Background Diet plays a role on the development of the immune system, and polyunsaturated fatty acids can modulate the expression of a variety of genes. Human milk contains conjugated linoleic acid (CLA), a fatty acid that seems to contribute to immune development. Indeed, recent studies carried out in our group in suckling animals have shown that the immune function is enhanced after feeding them with an 80:20 isomer mix composed of c9,t11 and t10,c12 CLA. However, little work has been done on the effects of CLA on gene expression, and even less regarding immune system development in early life. Results The expression profile of mesenteric lymph nodes from animals supplemented with CLA during gestation and suckling through dam's milk (Group A) or by oral gavage (Group B), supplemented just during suckling (Group C) and control animals (Group D) was determined with the aid of the specific GeneChip® Rat Genome 230 2.0 (Affymettrix). Bioinformatics analyses were performed using the GeneSpring GX software package v10.0.2 and lead to the identification of 89 genes differentially expressed in all three dietary approaches. Generation of a biological association network evidenced several genes, such as connective tissue growth factor (Ctgf), tissue inhibitor of metalloproteinase 1 (Timp1), galanin (Gal), synaptotagmin 1 (Syt1), growth factor receptor bound protein 2 (Grb2), actin gamma 2 (Actg2) and smooth muscle alpha actin (Acta2), as highly interconnected nodes of the resulting network. Gene underexpression was confirmed by Real-Time RT-PCR. Conclusions Ctgf, Timp1, Gal and Syt1, among others, are genes modulated by CLA supplementation that may have a role on mucosal immune responses in early life. PMID:21481241

Gene expression profiles in rat mesenteric lymph nodes upon supplementation with conjugated linoleic acid during gestation and suckling.

PubMed

Selga, Elisabet; Pérez-Cano, Francisco J; Franch, Angels; Ramírez-Santana, Carolina; Rivero, Montserrat; Ciudad, Carlos J; Castellote, Cristina; Noé, Véronique

2011-04-11

Diet plays a role on the development of the immune system, and polyunsaturated fatty acids can modulate the expression of a variety of genes. Human milk contains conjugated linoleic acid (CLA), a fatty acid that seems to contribute to immune development. Indeed, recent studies carried out in our group in suckling animals have shown that the immune function is enhanced after feeding them with an 80:20 isomer mix composed of c9,t11 and t10,c12 CLA. However, little work has been done on the effects of CLA on gene expression, and even less regarding immune system development in early life. The expression profile of mesenteric lymph nodes from animals supplemented with CLA during gestation and suckling through dam's milk (Group A) or by oral gavage (Group B), supplemented just during suckling (Group C) and control animals (Group D) was determined with the aid of the specific GeneChip(®) Rat Genome 230 2.0 (Affymettrix). Bioinformatics analyses were performed using the GeneSpring GX software package v10.0.2 and lead to the identification of 89 genes differentially expressed in all three dietary approaches. Generation of a biological association network evidenced several genes, such as connective tissue growth factor (Ctgf), tissue inhibitor of metalloproteinase 1 (Timp1), galanin (Gal), synaptotagmin 1 (Syt1), growth factor receptor bound protein 2 (Grb2), actin gamma 2 (Actg2) and smooth muscle alpha actin (Acta2), as highly interconnected nodes of the resulting network. Gene underexpression was confirmed by Real-Time RT-PCR. Ctgf, Timp1, Gal and Syt1, among others, are genes modulated by CLA supplementation that may have a role on mucosal immune responses in early life.

Salivary lactate dehydrogenase and aminotransferases in diabetic patients

PubMed Central

Malicka, Barbara; Skoskiewicz-Malinowska, Katarzyna; Kaczmarek, Urszula

2016-01-01

Abstract Diabetes mellitus (DM) is a group of metabolic diseases resulting from impaired insulin secretion and/or action. DM is characterized by hyperglycemia that can lead to the dysfunction or damage of organs, including the salivary glands. The aim of this study was to compare the levels of salivary lactate dehydrogenase (LDH), aspartate aminotransferase (AST), and alanine aminotransferase (ALT) in diabetic patients. The study was approved by the Bioethics Committee of Wroclaw Medical University (Poland). The study comprised 90 adults of both sexes, aged 21 to 57 years. The patients were divided into 3 groups: type 1 diabetics (D1), type 2 diabetics (D2), and a healthy control group (C). Each group consisted of 30 age- and sex-matched subjects. Total protein (P, by Lowry method), LDH, AST, ALT (with Alpha Diagnostics kits), and salivary flow rate were measured in unstimulated mixed saliva. The level of glycosylated hemoglobin (HbA1c) was measured with DCA 2000 Reagent Kit. The obtained data were analyzed using the Mann–Whitney U test and the Spearman rank at a significance level of P < 0.05 with the use of STATISTICA 9.0 software. In comparison with C, D1 presented a significantly higher activity of LDH (P < 0.001), AST (P < 0.001), and ALT (P < 0.01), whereas D2 indicated higher levels of LDH (P < 0.001) and ALT (P < 0.05) compared with C. Comparing D1 to D2, approximately 3-fold higher activity of AST (P < 0.01) and approximately 4.5-fold higher activity of ALT (P < 0.01) was observed. Higher levels of salivary LDH, AST, and ALT in D1 compared with D2 and C confirm that salivary glands of D1 might be attributed to autoimmunological damage associated with the pathomechanism of DM. PMID:27893660

Salivary lactate dehydrogenase and aminotransferases in diabetic patients.

PubMed

Malicka, Barbara; Skoskiewicz-Malinowska, Katarzyna; Kaczmarek, Urszula

2016-11-01

Diabetes mellitus (DM) is a group of metabolic diseases resulting from impaired insulin secretion and/or action. DM is characterized by hyperglycemia that can lead to the dysfunction or damage of organs, including the salivary glands.The aim of this study was to compare the levels of salivary lactate dehydrogenase (LDH), aspartate aminotransferase (AST), and alanine aminotransferase (ALT) in diabetic patients.The study was approved by the Bioethics Committee of Wroclaw Medical University (Poland). The study comprised 90 adults of both sexes, aged 21 to 57 years. The patients were divided into 3 groups: type 1 diabetics (D1), type 2 diabetics (D2), and a healthy control group (C). Each group consisted of 30 age- and sex-matched subjects. Total protein (P, by Lowry method), LDH, AST, ALT (with Alpha Diagnostics kits), and salivary flow rate were measured in unstimulated mixed saliva. The level of glycosylated hemoglobin (HbA1c) was measured with DCA 2000 Reagent Kit. The obtained data were analyzed using the Mann-Whitney U test and the Spearman rank at a significance level of P < 0.05 with the use of STATISTICA 9.0 software.In comparison with C, D1 presented a significantly higher activity of LDH (P < 0.001), AST (P < 0.001), and ALT (P < 0.01), whereas D2 indicated higher levels of LDH (P < 0.001) and ALT (P < 0.05) compared with C. Comparing D1 to D2, approximately 3-fold higher activity of AST (P < 0.01) and approximately 4.5-fold higher activity of ALT (P < 0.01) was observed.Higher levels of salivary LDH, AST, and ALT in D1 compared with D2 and C confirm that salivary glands of D1 might be attributed to autoimmunological damage associated with the pathomechanism of DM.

Significance of preoperative planning software for puncture and channel establishment in percutaneous endoscopic lumbar DISCECTOMY: A study of 40 cases.

PubMed

Hu, Zhouyang; Li, Xinhua; Cui, Jian; He, Xiaobo; Li, Cong; Han, Yingchao; Pan, Jie; Yang, Mingjie; Tan, Jun; Li, Lijun

2017-05-01

Preoperative planning software has been widely used in many other minimally invasive surgeries, but there is a lack of information describing the clinical benefits of existing software applied in percutaneous endoscopic lumbar discectomy (PELD). This study aimed to compare the clinical efficacy of preoperative planning software in puncture and channel establishment of PELD with routine methods in treating lumbar disc herniation (LDH). From June 2016 to October 2016, 40 patients who had single L4/5 or L5/S1 disc herniation were divided into two groups. Group A adopted planning software for preoperative puncture simulation while Group B took routine cases discussion for making puncture plans. The channel establishment time, operative time, fluoroscopic times and complications were compared between the two groups. The surgical efficacy was evaluated according to the Visual Analogue Scale (VAS), Oswestry Disability Index (ODI) and modified Macnab's criteria. The mean channel establishment time was 25.1 ± 4.2 min and 34.6 ± 5.4 min in Group A and B, respectively (P < 0.05). The mean operative time was 80.8 ± 8.4 min and 92.1 ± 7.3 min in Group A and B, respectively (P < 0.05). The fluoroscopic times were 21.5 ± 5.2 in Group A and 29.3 ± 5.5 in Group B (P < 0.05). There were no significant differences in VAS and ODI scorings between the two groups either preoperatively or postoperatively (P > 0.05). The findings of modified Macnab's criteria at each follow-up also showed no significant differences (P > 0.05). The application of preoperative planning software in puncture and cannula insertion planning in PELD was easy and reliable, and could reduce the channel establishment time, operative time and fluoroscopic times of PELD significantly. Copyright © 2017 IJS Publishing Group Ltd. Published by Elsevier Ltd. All rights reserved.

[A preliminary study on the role of substance P in histamine-nasal-spray-induced allergic conjunctivitis in guinea pigs].

PubMed

Li, Tong; Zhao, Changqing

2015-10-01

To investigate the effect of the non adrenergic non cholinergic nerve (NANC) and substance P (SP) in allergic rhinoconjunctivitis by observing histamine nasal provocation induced conjunctivitis in guinea pigs. Forty male guinea pigs were randomly divided into five groups with each group consisting of eight guinea pigs. All anesthetized guinea pigs were exposed either to histamine (0.2%, 5 µl) (group B~E) or saline (5 µl, group A) via unilateral nostril. No pretreatment was done in group A and B while pretreatment was done in groups C~E through injection into the unilateral common carotid artery with cholinergic nerve inhibitor (atropine, 1 mg/kg, group C), cholinergic nerve inhibitor plus adrenergic nerve inhibitors (atropine, 1 mg/kg, phentolamine, 1 mg/kg plus Esmolol, 1 mg/kg, group D) and cholinergic nerve inhibitor, adrenergic nerve inhibitors plus SP receptor antagonist (the same treatment with group D plus D-SP 10(-6) mol/L, 1 µl/g, group E), respectively. To assess the ipsilateral conjunctival inflammatory reaction, conjunctiva leakage with Evans blue dye assessments and HE staining of conjunctival tissues were performed. The SP expression in ipsilateral conjunctival tissue in different groups of guinea pigs were assessed by immunofluorescence and RT-PCR. The activity of eosinophils was assessed by eosinophil major basic protein 1 (MBP1) with RT-PCR, meanwhile, the activity of mast cells was assessed by tryptase with RT-PCR. SPSS 17.0 software was used to analyze the data. At 30 min after nasal application of histamine, ipsilateral conjunctivitis was successfully induced as shown by the change of conjunctiva leakage and histology. The content of Evans blue in ipsilateral conjunctival tissue of group A~E was (13.78 ± 2.48), (29.62 ± 3.31), (19.03 ± 1.47), (18.42 ± 2.52), (14.83 ± 2.14) µg/ml, respectively. There was statistically significant difference between group A and B (t = -10.66, P < 0.05), group B and C (t = 7.97, P < 0.05), group C and E (t = 4.51, P < 0.05). PT-PCR assays showed the relative expression of SP mRNA in ipsilateral conjunctival tissues of group A~E was (1.00 ± 0.04), (1.61 ± 0.09), (1.26 ± 0.03), (1.27 ± 0.06), (1.08 ± 0.05), respectively. There was statistically significant difference between group A and B (t = -22.04, P < 0.05), group B and C (t = 12.93, P < 0.05), group C and E (t = 11.85, P < 0.05). The expression of tryptase of ipsilateral conjunctiva was (1.00 ± 0.01), (1.01 ± 0.05), (1.02 ± 0.17), (1.00 ± 0.14), (1.01 ± 0.20), and the expression of MBP1 was (1.00 ± 0.03), (1.02 ± 0.15), (0.94 ± 0.08), (1.01 ± 0.07), (0.98 ± 0.13) in A~E groups. There was not statistically significant difference among five groups (F value was 1.93, 0.57, both P > 0.05). Histamine nasal provocation induced allergic inflammatory response of ipsilateral conjunctiva in guinea pigs. Neural factors including NANC nerves and its medium SP participated this nose-ocular reflex process. These data help to develop a more scientific clinical treatment strategy.

Annotated bibliography of software engineering laboratory literature

NASA Technical Reports Server (NTRS)

Buhler, Melanie; Valett, Jon

1989-01-01

An annotated bibliography is presented of technical papers, documents, and memorandums produced by or related to the Software Engineering Laboratory. The bibliography was updated and reorganized substantially since the original version (SEL-82-006, November 1982). All materials were grouped into eight general subject areas for easy reference: (1) The Software Engineering Laboratory; (2) The Software Engineering Laboratory: Software Development Documents; (3) Software Tools; (4) Software Models; (5) Software Measurement; (6) Technology Evaluations; (7) Ada Technology; and (8) Data Collection. Subject and author indexes further classify these documents by specific topic and individual author.

[Meta analysis of parallel versus perpendicular double plating for distal humerus fracture of type C in adults].

PubMed

Li, B B; Lin, F; Cai, L H; Chen, Y; Lin, Z J

2017-08-01

Objective: To evaluate the effects of parallel versus perpendicular double plating for distal humerus fracture of type C. Methods: A standardized comprehensive literature search was performed by PubMed, Embase, Cochrane library, CMB, CNKI and Medline datebase.Randomized controlled studies on comparison between parallel versus perpendicular double plating for distal humerus fracture of type C before December 2015 were enrolled in the study.All date were analyzed by the RevMan 5.2 software. Results: Six studies, including 284 patients, met the inclusion criteria.There were 155 patients in perpendicular double plating group, 129 patients in parallel double plating group.The results of Meta-analysis indicated that there were statistically significant difference between the two groups in complications ( OR =2.59, 95% CI : 1.03 to 6.53, P =0.04). There was no significant difference between the two groups in surgical duration ( MD =-1.84, 95% CI : -9.06 to 5.39, P =0.62), bone union time ( MD =0.09, 95% CI : -0.06 to 0.24, P =0.22), Mayo Elbow Performance Score ( MD =0.09, 95% CI : -0.06 to 0.24, P =0.22), Range of Motions ( MD =-0.92, 95% CI : -4.65 to 2.81, P =0.63) and the rate of excellent and good results ( OR =0.64, 95% CI : 0.27 to 1.52, P =0.31). Conclusion: Both perpendicular and parallel double plating are effective in distal humerus fracture of type C, parallel double plating has less complications.

A lazy way to design infrared lens

NASA Astrophysics Data System (ADS)

Qiu, RongSheng; Wu, JianDong; Chen, LongJiang; Yu, Kun; Pang, HaoJun; Hu, BaiZhen

2017-08-01

We designed a compact middle-wave infrared (MWIR) lens with a large focal length ratio (about 1.5:1), used in the 3.7 to 4.8 μm range. The lens is consisted of a compact front group and a re-imaging group. Thanks to the compact front group configuration, it is possible to install a filter wheel mechanism in such a tight space. The total track length of the lens is about 50mm, which includes a 2mm thick protective window and a cold shield of 12mm. The full field of view of the lens is about 3.6°, and F number is less than 1.6, the image circle is about 4.6mm in diameter. The design performance of the lens reaches diffraction limitation, and doesn't change a lot during a temperature range of -40°C +60°C. This essay proposed a stepwise design method of infrared optical system guided by the qualitative approach. The method fully utilize the powerful global optimization ability, with a little effort to write code snippet in optical design software, frees optical engineer from tedious calculation of the original structure.

Association between maternal, fetal and paternal MTHFR gene C677T and A1298C polymorphisms and risk of recurrent pregnancy loss: a comprehensive evaluation.

PubMed

Yang, Yi; Luo, Yunyao; Yuan, Jing; Tang, Yidan; Xiong, Lang; Xu, MangMang; Rao, XuDong; Liu, Hao

2016-06-01

Numerous studies have investigated the associations between methylenetetrahydrofolate reductase (MTHFR) gene C677T and A1298C polymorphisms and risk of recurrent pregnancy loss (RPL); however, the results remain controversial. The aim of this study is to drive a more precise estimation of association between MTHFR gene polymorphisms and risk of RPL. We searched PubMed, EMBASE, Cochrane library, Web of Science and China Knowledge Resource Integrated Database for papers on MTHFR gene C677T and A1298C polymorphisms and RPL risk. The pooled odds ratios (ORs) with 95 % confidence intervals (CIs) were used to assess the strength of association in the homozygous model, heterozygous model, dominant model, recessive model and an additive model. The software STATA (Version 13.0) was used for statistical analysis. Overall, 57 articles were included in the final meta-analysis. In maternal group the MTHFR C677T polymorphism showed pooled odds ratios for the homozygous comparison [OR = 2.285, 95 % CI (1.702, 3.067)] and the MTHFR A1298C polymorphism showed pooled odds ratios for recessive model [OR = 1.594, 95 % CI (1.136, 2.238)]. In fetal group the MTHFR C677T polymorphism showed pooled odds ratios for dominant model [OR = 1.037, 95 % CI (0.567, 1.894)] and the MTHFR A1298C polymorphism showed pooled odds ratios for dominant model [OR = 1.495, 95 % CI (1.102, 2.026)]. In summary, the results of our meta-analysis indicate that maternal and paternal MTHFR gene C677T and A1298C polymorphisms are associated with RPL. We also observed a significant association between fetal MTHFR A1298C polymorphism and RPL but not C677T.

High Energy Physics Forum for Computational Excellence: Working Group Reports (I. Applications Software II. Software Libraries and Tools III. Systems)

DOE Office of Scientific and Technical Information (OSTI.GOV)

Habib, Salman; Roser, Robert

Computing plays an essential role in all aspects of high energy physics. As computational technology evolves rapidly in new directions, and data throughput and volume continue to follow a steep trend-line, it is important for the HEP community to develop an effective response to a series of expected challenges. In order to help shape the desired response, the HEP Forum for Computational Excellence (HEP-FCE) initiated a roadmap planning activity with two key overlapping drivers -- 1) software effectiveness, and 2) infrastructure and expertise advancement. The HEP-FCE formed three working groups, 1) Applications Software, 2) Software Libraries and Tools, and 3)more » Systems (including systems software), to provide an overview of the current status of HEP computing and to present findings and opportunities for the desired HEP computational roadmap. The final versions of the reports are combined in this document, and are presented along with introductory material.« less

High Energy Physics Forum for Computational Excellence: Working Group Reports (I. Applications Software II. Software Libraries and Tools III. Systems)

DOE Office of Scientific and Technical Information (OSTI.GOV)

Habib, Salman; Roser, Robert; LeCompte, Tom

2015-10-29

Computing plays an essential role in all aspects of high energy physics. As computational technology evolves rapidly in new directions, and data throughput and volume continue to follow a steep trend-line, it is important for the HEP community to develop an effective response to a series of expected challenges. In order to help shape the desired response, the HEP Forum for Computational Excellence (HEP-FCE) initiated a roadmap planning activity with two key overlapping drivers -- 1) software effectiveness, and 2) infrastructure and expertise advancement. The HEP-FCE formed three working groups, 1) Applications Software, 2) Software Libraries and Tools, and 3)more » Systems (including systems software), to provide an overview of the current status of HEP computing and to present findings and opportunities for the desired HEP computational roadmap. The final versions of the reports are combined in this document, and are presented along with introductory material.« less

Validation of a Magnetic Resonance Imaging-based Auto-contouring Software Tool for Gross Tumour Delineation in Head and Neck Cancer Radiotherapy Planning.

PubMed

Doshi, T; Wilson, C; Paterson, C; Lamb, C; James, A; MacKenzie, K; Soraghan, J; Petropoulakis, L; Di Caterina, G; Grose, D

2017-01-01

To carry out statistical validation of a newly developed magnetic resonance imaging (MRI) auto-contouring software tool for gross tumour volume (GTV) delineation in head and neck tumours to assist in radiotherapy planning. Axial MRI baseline scans were obtained for 10 oropharyngeal and laryngeal cancer patients. GTV was present on 102 axial slices and auto-contoured using the modified fuzzy c-means clustering integrated with the level set method (FCLSM). Peer-reviewed (C-gold) manual contours were used as the reference standard to validate auto-contoured GTVs (C-auto) and mean manual contours (C-manual) from two expert clinicians (C1 and C2). Multiple geometric metrics, including the Dice similarity coefficient (DSC), were used for quantitative validation. A DSC≥0.7 was deemed acceptable. Inter- and intra-variabilities among the manual contours were also validated. The two-dimensional contours were then reconstructed in three dimensions for GTV volume calculation, comparison and three-dimensional visualisation. The mean DSC between C-gold and C-auto was 0.79. The mean DSC between C-gold and C-manual was 0.79 and that between C1 and C2 was 0.80. The average time for GTV auto-contouring per patient was 8 min (range 6-13 min; mean 45 s per axial slice) compared with 15 min (range 6-23 min; mean 88 s per axial slice) for C1. The average volume concordance between C-gold and C-auto volumes was 86.51% compared with 74.16% between C-gold and C-manual. The average volume concordance between C1 and C2 volumes was 86.82%. This newly designed MRI-based auto-contouring software tool shows initial acceptable results in GTV delineation of oropharyngeal and laryngeal tumours using FCLSM. This auto-contouring software tool may help reduce inter- and intra-variability and can assist clinical oncologists with time-consuming, complex radiotherapy planning. Copyright © 2016 The Royal College of Radiologists. Published by Elsevier Ltd. All rights reserved.

Spectrophotometric and computerized evaluation of tooth bleaching employing 10 different home-bleaching procedures: In-vitro study

PubMed Central

Peskersoy, Cem; Tetik, Ayhan; Ozturk, Veli Ozgen; Gokay, Necmi

2014-01-01

Objective: The aim of this in-vitro study was to evaluate the efficacy of bleaching products, determine the applicability and validation of the measurement methods. Materials and Methods: Freshly extracted 110 human incisor teeth were stained with whole blood and hemolysate solution prior to the application of 10 different home-bleaching products. Spectrophotometric measurements of the tooth shades were performed for each specimen before and after bleaching at the 1st, 3rd, 7th, and 14 days. Differences in lightness (Δl), chroma (Δc), hue (Δh) values and shade changes were measured to evaluate process. Computerized digital imaging analyses to determine the color changes were performed with Photoshop CS4 software (Adobe, San Jose, CA, USA). Statistical analyses were performed with analysis of variance, Scheffe and Tukey tests. Results: In all of the test groups regardless of the material used, a significant increase in lightness and hue, and decrease of chroma were observed, as compared to the control group. After recommended bleaching applications, Δl and Δh values respectively increased in group Zaris White and Brite (ZWB) and group Pola Night and Δc values showed significant decrease in groups ZWB and Rembrandt REM3 (P < 0.05). At the end of the procedure both spectrophotometric and digital imaging analysis showed ZWB was the most effective product among the others while Yotuel and Happy Smile were the least (P < 0.05). Conclusions: Home-bleaching systems showed slower but almost permanent bleaching effect likewise office-based methods. Both software and spectrophotometric analyses have advantages such as evaluating the results objectively and numerically, also treatment outcomes could be preserved. PMID:25512738

Impact and duration effect of telemonitoring on ΗbA1c, BMI and cost in insulin-treated Diabetes Mellitus patients with inadequate glycemic control: A randomized controlled study.

PubMed

Fountoulakis, Stelios; Papanastasiou, Labrini; Gryparis, Alexandros; Markou, Athina; Piaditis, George

2015-01-01

To monitor and control the blood glucose levels in inefficiently insulin-treated patients with type 1 and 2 diabetes mellitus (DM) using a telemonitoring system and determine whether the improvement of HbA1c has a lasting effect following its discontinuation. Seventy inefficiently controlled insulin-treated DM patients using telemonitoring (telemonitoring group-TG) [HbA1c 9.9±2.3% (85±24.9mmol/mol)] and 35 age-, body mass index (BMI)- and Hba1c-matched insulin-treated patients receiving outpatient care (control group-CG) [HbA1c 9.7±2.1% (82±23.4mmol/mol)] were enrolled. Data of TG were transmitted from the glucose-meters to our computers via modem. Communication was achieved via e-mails and mobile phone text-messages through integrated software. HbA1c and BMI were evaluated at enrollment, 3 and 6 months, and 6 months after telemonitoring discontinuation. Frequency of hypo- and hyperglycemias and cost were also analyzed. Significant reduction in HbA1c was observed in TG both at 3 [7.1±1.0% (54±10.5mmol/mol) p<0.001] and 6 months [6.9±0.9% (52±9.5mmol/mol) p<0.001], compared to the CG group at the same timepoints. Significant reduction was also observed in the TG subgroups with ΗbA1c≥10% and 10>HbA1c≥7.5% at 3 and 6 months, compared to CG. No statistically significant differences in BMI were observed between TG and CG. Six months after telemonitoring discontinuation, HbA1c in TG was slightly increased [7.3±1.0% (56±10.4mol/mol)]. Attenuation was also observed in both TG subgroups. Compared to CG, the number of monthly hypo- and hyperglycemias was reduced in TG. The intervention had a financial benefit for patients living more than 100 km from the health care provider. Telemonitoring can result in reduction of HbA1c and frequency of hypo- and hyperglycemias. This beneficial effect is slightly attenuated 6 months after terminating telemonitoring.

Effect of Nd:YAG laser light on post-extractive socket healing in rats treated with zoledronic acid and dexamethasone

NASA Astrophysics Data System (ADS)

Mergoni, Giovanni; Merigo, Elisabetta; Passerini, Pietro; Corradi, Domenico; Maestri, Roberta; Bussolati, Ovidio; Bianchi, Massimiliano; Sala, Roberto; Govoni, Paolo; Namour, Samir; Vescovi, Paolo

2016-03-01

Introduction The effect of low level laser therapy (LLLT) on the healing process could be useful for the prevention of post-extractive Bisphosphonate-related Osteonecrosis of the Jaws (BRONJ). The aim of the study was to investigate the effect of LLLT on the post-extractive socket healing in rats treated with zoledronic acid and dexamethasone. Material and Methods Thirty male Sprague-Dawley rats were divided in 4 groups: control group (C, n = 5), laser group (L, n = 5), treatment group (T, n = 10) and treatment plus laser group (T+L, n = 10). Rats of group T and T+L received zoledronate 0,1 mg/Kg and dexamethasone 1 mg/Kg every 2 days for 10 weeks. Rats of group C and L were infused with vehicle. After 9 weeks the first maxillary molars were extracted in all rats. Rats of groups L and T+L received laser therapy (Nd:YAG, 1064 nm, 1.25W, 15Hz, 5 min, 14.37 J/cm2) in the socket area at days 0, 2, 4 and 6 after surgery. At 8 days from extraction, the sockets were clinically assessed with a grading score and the wound area was measured with a dedicate software. Histomorphometric evaluation and western blot analysis of osteopontin and osteocalcin expression were performed. Results Group T+L showed a trend toward a better clinical grading score compared to group T (grade I 22% Vs 28 % - grade II 56% Vs 28% - grade III 22% Vs 44%, respectively). The average wound area was similar among the groups. Inhibition of osteoclastic alveolar bone resorption was found in groups T and T+L (P<0.001). Rats of groups L and T+L showed a significant higher expression of osteocalcin compared to rats of groups C and T (C=0.3993; L=1.394; T=0.2922; T+L=1.156; P=0.0001). The expression of osteopontin did not show significant differences in the groups treated with Nd:YAG compared to the ones that did not receive laser irradiation. Conclusion Our findings suggest that laser irradiation after tooth extraction can promote osteoblast differentiation, as demonstrated by the higher expression of osteocalcin. Thus, laser irradiation could be considered a way to improve socket healing in conditions at risk for MRONJ development.

Mobile diabetes intervention study: testing a personalized treatment/behavioral communication intervention for blood glucose control.

PubMed

Quinn, Charlene C; Gruber-Baldini, Ann L; Shardell, Michelle; Weed, Kelly; Clough, Suzanne S; Peeples, Malinda; Terrin, Michael; Bronich-Hall, Lauren; Barr, Erik; Lender, Dan

2009-07-01

National data find glycemic control is within target (A1c<7.0%) for 37% of patients with diabetes, and only 7% meet recommended glycemic, lipid, and blood pressure goals. To compare active interventions and usual care for glucose control in a randomized clinical trial (RCT) among persons with diabetes cared for by primary care physicians (PCPs) over the course of 1 year. Physician practices (n=36) in 4 geographic areas are randomly assigned to 1 of 4 study groups. The intervention is a diabetes communication system, using mobile phones and patient/physician portals to allow patient-specific treatment and communication. All physicians receive American Diabetes Association (ADA) Guidelines for diabetes care. Patients with poor diabetes control (A1c> or =7.5%) at baseline (n=260) are enrolled in study groups based on PCP randomization. All study patients receive blood glucose (BG) meters and a year's supply of testing materials. Patients in three treatment groups select one of two mobile phone models, receive one-year unlimited mobile phone data and service plan, register on the web-based individual patient portal and receive study treatment phone software based on study assignment. Control group patients receive usual care from their PCP. The primary outcome is mean change in A1c over a 12-month intervention period. Traditional methods of disease management have not achieved adequate control for BG and other conditions important to persons with diabetes. Tools to improve communication between patients and PCPs may improve patient outcomes and be satisfactory to patients and physicians. This RCT is ongoing.

Evolving attractive faces using morphing technology and a genetic algorithm: a new approach to determining ideal facial aesthetics.

PubMed

Wong, Brian J F; Karimi, Koohyar; Devcic, Zlatko; McLaren, Christine E; Chen, Wen-Pin

2008-06-01

The objectives of this study were to: 1) determine if a genetic algorithm in combination with morphing software can be used to evolve more attractive faces; and 2) evaluate whether this approach can be used as a tool to define or identify the attributes of the ideal attractive face. Basic research study incorporating focus group evaluations. Digital images were acquired of 250 female volunteers (18-25 y). Randomly selected images were used to produce a parent generation (P) of 30 synthetic faces using morphing software. Then, a focus group of 17 trained volunteers (18-25 y) scored each face on an attractiveness scale ranging from 1 (unattractive) to 10 (attractive). A genetic algorithm was used to select 30 new pairs from the parent generation, and these were morphed using software to produce a new first generation (F1) of faces. The F1 faces were scored by the focus group, and the process was repeated for a total of four iterations of the algorithm. The algorithm mimics natural selection by using the attractiveness score as the selection pressure; the more attractive faces are more likely to morph. All five generations (P-F4) were then scored by three focus groups: a) surgeons (n = 12), b) cos-metology students (n = 44), and c) undergraduate students (n = 44). Morphometric measurements were made of 33 specific features on each of the 150 synthetic faces, and correlated with attractiveness scores using univariate and multivariate analysis. The average facial attractiveness scores increased with each generation and were 3.66 (+0.60), 4.59 (+/-0.73), 5.50 (+/-0.62), 6.23 (+/-0.31), and 6.39 (+/-0.24) for P and F1-F4 generations, respectively. Histograms of attractiveness score distributions show a significant shift in the skew of each curve toward more attractive faces with each generation. Univariate analysis identified nasal width, eyebrow arch height, and lip thickness as being significantly correlated with attractiveness scores. Multivariate analysis identified a similar collection of morphometric measures. No correlation with more commonly accepted measures such as the length facial thirds or fifths were identified. When images are examined as a montage (by generation), clear distinct trends are identified: oval shaped faces, distinct arched eyebrows, and full lips predominate. Faces evolve to approximate the guidelines suggested by classical canons. F3 and F4 generation faces look profoundly similar. The statistical and qualitative analysis indicates that the algorithm and methodology succeeds in generating successively more attractive faces. The use of genetic algorithms in combination with a morphing software and traditional focus-group derived attractiveness scores can be used to evolve attractive synthetic faces. We have demonstrated that the evolution of attractive faces can be mimicked in software. Genetic algorithms and morphing provide a robust alternative to traditional approaches rooted in comparing attractiveness scores with a series of morphometric measurements in human subjects.

Development of a Communications Front End Processor (FEP) for the VAX-11/780 Using an LSI-11/23.

DTIC Science & Technology

1983-12-01

9 Approach . . . . . . . . . . . . . . . . . . 11 Software Development Life Cycle . . . . . . . 11 Requirements Analysis...proven to be useful (25] during the Software Development Life Cycle of a project. Development tools and documentation aids used throughout this effort...include "Structure Charts" ( ref Appendix B ), a "Data Dictionary" ( ref Appendix C ),and Program Design Language CPDL). 1.5.1 Software Development- Life

AceTree: a major update and case study in the long term maintenance of open-source scientific software.

PubMed

Katzman, Braden; Tang, Doris; Santella, Anthony; Bao, Zhirong

2018-04-04

AceTree, a software application first released in 2006, facilitates exploration, curation and editing of tracked C. elegans nuclei in 4-dimensional (4D) fluorescence microscopy datasets. Since its initial release, AceTree has been continuously used to interact with, edit and interpret C. elegans lineage data. In its 11 year lifetime, AceTree has been periodically updated to meet the technical and research demands of its community of users. This paper presents the newest iteration of AceTree which contains extensive updates, demonstrates the new applicability of AceTree in other developmental contexts, and presents its evolutionary software development paradigm as a viable model for maintaining scientific software. Large scale updates have been made to the user interface for an improved user experience. Tools have been grouped according to functionality and obsolete methods have been removed. Internal requirements have been changed that enable greater flexibility of use both in C. elegans contexts and in other model organisms. Additionally, the original 3-dimensional (3D) viewing window has been completely reimplemented. The new window provides a new suite of tools for data exploration. By responding to technical advancements and research demands, AceTree has remained a useful tool for scientific research for over a decade. The updates made to the codebase have extended AceTree's applicability beyond its initial use in C. elegans and enabled its usage with other model organisms. The evolution of AceTree demonstrates a viable model for maintaining scientific software over long periods of time.

ModSAF Software Architecture Design and Overview Document

DTIC Science & Technology

1993-12-20

ADVANCED DISTRIBUTED SIMULATIONTECHNOLOGY AD-A282 740 ModSAF SOFTWARE ARCHITECTURE DESIGN AND OVERVIEW DOCUMENT Ver 1.0 - 20 December 1993 D T...AND SUBTITLE 5. FUNDING NUMBERS MOdSAF SOFTWARE ARCHITECTURE DESIGN AND OVERVIEW DOCUMENT C N61339-91-D-O00, Delivery Order (0021), ModSAF (CDRL A004) 6

Evaluation of Hyoid Position in Children of 7-11 Years Old with Ankyloglossia in Lateral Cephalometic Radiographs.

PubMed

Ardekani, Mohammad Danesh; Tabatabaee, Zohre; Halvani, Niloofar; Tabatabaee, Hossein; Yasaee, Soghra

2016-09-01

Ankyloglossia is an anatomic developmental anomaly determining by thick and short, fi brotic ferenum. Tongue changes have severe eff ects on occlusion and oropharyngeal structures. The aim of this study was to evaluate the position of hyoid in children 7-11 years` old with ankyloglossia in lateral cephalometric radiographs. 30 radiographs of children with ankyloglossia with mean age of 9.8 and 30 radiographs of control group were chosen and matched in terms of age, sex, class of malocclusion and growth pattern. The measurements of hyoid position were done (C3-RGN, C3-H, H-RGN, HP) and analyzed with paired t-test under SPSS-15 software. The means of C3-RGN, C3-H, H-RGN, HP were 66.2, 30.9, 33.4, 3.2 and 7.45, 36.8, 34.1, 68.6 in ankyloglossia and control groups respectively. Lower amount of measurements were statistically signifi cant (p-value<0.05). Size and position of hyoid in children with ankyloglossia show more posterior- superior Position than healthy children.

libdrdc: software standards library

NASA Astrophysics Data System (ADS)

Erickson, David; Peng, Tie

2008-04-01

This paper presents the libdrdc software standards library including internal nomenclature, definitions, units of measure, coordinate reference frames, and representations for use in autonomous systems research. This library is a configurable, portable C-function wrapped C++ / Object Oriented C library developed to be independent of software middleware, system architecture, processor, or operating system. It is designed to use the automatically-tuned linear algebra suite (ATLAS) and Basic Linear Algebra Suite (BLAS) and port to firmware and software. The library goal is to unify data collection and representation for various microcontrollers and Central Processing Unit (CPU) cores and to provide a common Application Binary Interface (ABI) for research projects at all scales. The library supports multi-platform development and currently works on Windows, Unix, GNU/Linux, and Real-Time Executive for Multiprocessor Systems (RTEMS). This library is made available under LGPL version 2.1 license.

The Comparison of Dietary Behaviors among Rural Controlled and Uncontrolled Hypertensive Patients.

PubMed

Kamran, Aziz; Shekarchi, Ali Akbar; Sharifian, Elham; Heydari, Heshmatolah

2016-01-01

Nutrition is a dominant peripheral factor in increasing blood pressure; however, little information is available about the nutritional status of hypertensive patients in Iran. This study aimed to compare nutritional behaviors of the rural controlled and uncontrolled hypertensive patients and to determine the predictive power of nutritional behaviors from blood pressure. This cross-sectional study was conducted on 671 rural hypertensive patients, using multistage random sampling method in Ardabil city in 2013. Data were collected by a 3-day food record questionnaire. Nutritional data were extracted by Nutritionist 4 software and analyzed by the SPSS 18 software using Pearson correlation, multiple linear regression, ANOVA, and independent t-test. A significant difference was observed in the means of fat intake, cholesterol, saturated fat, sodium, energy, calcium, vitamin C, fiber, and nutritional knowledge between controlled and uncontrolled groups. In the controlled group, sodium, saturated fats, vitamin C, calcium, and energy intake explained 30.6% of the variations in blood pressure and, in the uncontrolled group, sodium, carbohydrate, fiber intake, and nutritional knowledge explained 83% of the variations in blood pressure. There was a significant difference in the nutritional behavior between the two groups and changes in blood pressure could be explained significantly by nutritional behaviors.

Single crystal growth and characterization of pure and sodium-modified copper tartrate

NASA Astrophysics Data System (ADS)

Quasim, I.; Firdous, A.; Want, B.; Khosa, S. K.; Kotru, P. N.

2008-12-01

Single crystal growth of pure and modified copper tartrate crystals bearing composition (Cu) x(Na) yC 4H 4O 6· nH 2O (where x=1, 0.77, 0.65; y=0, 0.23, 0.35) is achieved using gel technique. The optimum conditions required for the growth of these crystals are worked out. The morphological development of these crystals is studied using optical and scanning electron microscopy. The dominant habit faces of the grown copper tartrate crystals are (0 0 1) and (1 1 1). Calculation of the cell parameters using CRYSFIRE software suggests that the pure copper tartrate crystal belongs to orthorhombic system with space group P2 1/c whereas the modified copper tartrate falls under tetragonal system with the space group P4 2/nbc. The external morphological development is shown to remain unaffected in the modified copper tartrate. The stoichiometric composition of the crystals is established by EDAX analysis, CH analysis, FTIR spectroscopy and thermoanalytical techniques. Thermal analysis of the grown crystals suggests that pure copper tartrate is thermally stable up to 42.84 °C whereas the modified copper tartrate crystals are stable only up to 33.11 and 25.11 °C. Calculation of the percentage weight loss from the thermogram supplemented by EDAX/CH analysis and FTIR spectroscopy suggest that the chemical formula of pure copper tartrate crystal is CuC 4H 4O 6·3H 2O whereas the chemical formula for the modified copper tartrate crystals is (Cu) 0.77(Na) 0.23C 4H 4O 6·3H 2O and (Cu) 0.65(Na) 0.35 C 4H 4O 6·H 2O.

Selvester scoring in patients with strict LBBB using the QUARESS software.

PubMed

Xia, Xiaojuan; Chaudhry, Uzma; Wieslander, Björn; Borgquist, Rasmus; Wagner, Galen S; Strauss, David G; Platonov, Pyotr; Ugander, Martin; Couderc, Jean-Philippe

2015-01-01

Estimation of the infarct size from body-surface ECGs in post-myocardial infarction patients has become possible using the Selvester scoring method. Automation of this scoring has been proposed in order to speed-up the measurement of the score and improving the inter-observer variability in computing a score that requires strong expertise in electrocardiography. In this work, we evaluated the quality of the QuAReSS software for delivering correct Selvester scoring in a set of standard 12-lead ECGs. Standard 12-lead ECGs were recorded in 105 post-MI patients prescribed implantation of an implantable cardiodefibrillator (ICD). Amongst the 105 patients with standard clinical left bundle branch block (LBBB) patterns, 67 had a LBBB pattern meeting the strict criteria. The QuAReSS software was applied to these 67 tracings by two independent groups of cardiologists (from a clinical group and an ECG core laboratory) to measure the Selvester score semi-automatically. Using various level of agreement metrics, we compared the scores between groups and when automatically measured by the software. The average of the absolute difference in Selvester scores measured by the two independent groups was 1.4±1.5 score points, whereas the difference between automatic method and the two manual adjudications were 1.2±1.2 and 1.3±1.2 points. Eighty-two percent score agreement was observed between the two independent measurements when the difference of score was within two point ranges, while 90% and 84% score agreements were reached using the automatic method compared to the two manual adjudications. The study confirms that the QuAReSS software provides valid measurements of the Selvester score in patients with strict LBBB with minimal correction from cardiologists. Copyright © 2015 Elsevier Inc. All rights reserved.

The systematic evolution of a NASA software technology, Appendix C

NASA Technical Reports Server (NTRS)

Deregt, M. P.; Dulfer, J. E.

1972-01-01

A long range program is described whose ultimate purpose is to make possible the production of software in NASA within predictable schedule and budget constraints and with major characteristics such as size, run-time, and correctness predictable within reasonable tolerances. As part of the program a pilot NASA computer center will be chosen to apply software development and management techniques systematically and determine a set which is effective. The techniques will be developed by a Technology Group, which will guide the pilot project and be responsible for its success. The application of the technology will involve a sequence of NASA programming tasks graduated from simpler ones at first to complex systems in late phases of the project. The evaluation of the technology will be made by monitoring the operation of the software at the users' installations. In this way a coherent discipline for software design, production maintenance, and management will be evolved.

Ocular manifestations of Type 1 diabetes mellitus in pediatric population.

PubMed

Akil, Handan; Buluş, Ayse Derya; Andiran, Nesibe; Alp, Mehmet Numan

2016-09-01

To evaluate the necessity of ocular screening in Type 1 diabetes mellitus (DM). This study aims to investigate the diabetes-related ocular changes according to the glycosylated hemoglobin (HbA1c) level and duration of diabetes in children and compare the results with nondiabetic healthy children. Observational cross-sectional study designed by ophthalmology and pediatric endocrinology clinics. Forty-two children with Type 1 DM, 42 healthy gender- and age-matched children as controls were enrolled. All patients underwent ophthalmic and physical examination, with a review of medical history and current medication. HbA1c level, best corrected visual acuity, intraocular pressure (IOP), central corneal thickness (CCT), tear break-up time (BUT), Schirmer test, dilated fundus examination findings, central retinal thickness (CRT), and total macular volume (TMV) measurements were noted. Descriptive statistics, Student's t-test, Mann-Whitney U-test, Chi-square test for comparison of the group parameters and correlation analyses (Spearman analysis) were performed with SPSS statistical software 17.0 (SPSS Inc., Chicago, IL, USA). Type 1 DM group exhibited significantly reduced Schirmer test, increased IOP and decreased retinal thickness relative to the age-matched control group (P < 0.05) but no statistically significant difference was found for the BUT (P = 0.182) and for the CCT (P = 0.495). The correlations between the age, duration, HbA1c and IOP, BUT, Schirmer test, TMV, CRT measurements did not reach statistical significance. More frequent screening may be needed for complications, including neuropathy-related dry eye syndrome, IOP changes, and diabetic retinopathy in children with Type 1 DM.

Open Radio Communications Architecture Core Framework V1.1.0 Volume 1 Software Users Manual

DTIC Science & Technology

2005-02-01

on a PC utilizing the KDE desktop that comes with Red Hat Linux . The default desktop for most Red Hat Linux installations is the GNOME desktop. The...SCA) v2.2. The software was designed for a desktop computer running the Linux operating system (OS). It was developed in C++, uses ACE/TAO for CORBA...middleware, Xerces for the XML parser, and Red Hat Linux for the Operating System. The software is referred to as, Open Radio Communication

Pharmacokinetics of oral gabapentin in greyhound dogs.

PubMed

Kukanich, Butch; Cohen, Rachael L

2011-01-01

The purpose of this study was to assess the pharmacokinetics of gabapentin in healthy greyhound dogs after single oral doses targeted at 10 and 20mg/kg PO. Six healthy greyhounds were enrolled (3 males, 3 females). Blood was obtained at predetermined times for the measurement of gabapentin plasma concentrations by liquid chromatography/mass spectrometry. Pharmacokinetic parameters were determined with computer software. The actual mean (and range) doses administered were 10.2 (9.1-12.0) mg/kg and 20.5 (18.2-24) mg/kg for the 10mg/kg and 20mg/kg targeted dose groups. The mean C(MAX) for the 10 and 20mg/kg groups were 8.54 and 13.22 microg/mL at 1.3 and 1.5h, and the terminal half-lives were 3.3 and 3.4h, respectively. The relative bioavailability of the 10mg/kg group was 1.13 compared to the 20mg/kg group. Gabapentin was rapidly absorbed and eliminated in dogs, indicating that frequent dosing is needed to maintain minimum targeted plasma concentrations. 2009 Elsevier Ltd. All rights reserved.

An Introduction to Object-Oriented Programming.

DTIC Science & Technology

1990-04-01

therefore it is an ot ject-oriented program and 7 are (sic) an c~ect-oriented programm.er" 3.1 "BUILT-IN" LANGUAGES Sprevously def nei, a b’:i1t-in languaje ...machines. 8 3.1.2 EIFFEL Eiffel [Meye87, Meye88a, Meye88b, Meye88c] was developed by Bertrand Meyer at Interactive Software Engineering Inc. It is a...is intended to serve as both a language and environment for designing software that is easily reusable and extendible. The notion of programming as

Collected software engineering papers, volume 6

NASA Technical Reports Server (NTRS)

1988-01-01

A collection is presented of technical papers produced by participants in the Software Engineering Laboratory (SEL) during the period 1 Jun. 1987 to 1 Jan. 1989. The purpose of the document is to make available, in one reference, some results of SEL research that originally appeared in a number of different forums. For the convenience of this presentation, the twelve papers contained here are grouped into three major categories: (1) Software Measurement and Technology Studies; (2) Measurement Environment Studies; and (3) Ada Technology Studies. The first category presents experimental research and evaluation of software measurement and technology; the second presents studies on software environments pertaining to measurement. The last category represents Ada technology and includes research, development, and measurement studies.

Parallel Logic Programming and Parallel Systems Software and Hardware

DTIC Science & Technology

1989-07-29

Conference, Dallas TX. January 1985. (55) [Rous75] Roussel, P., "PROLOG: Manuel de Reference et d’Uilisation", Group d’ Intelligence Artificielle , Universite d...completed. Tools were provided for software development using artificial intelligence techniques. Al software for massively parallel architectures was...using artificial intelligence tech- niques. Al software for massively parallel architectures was started. 1. Introduction We describe research conducted

Investigation of attention deficit hyperactivity disorder (ADHD) sub-types in children via EEG frequency domain analysis.

PubMed

Aldemir, Ramazan; Demirci, Esra; Per, Huseyin; Canpolat, Mehmet; Özmen, Sevgi; Tokmakçı, Mahmut

2018-04-01

To investigate the frequency domain effects and changes in electroencephalography (EEG) signals in children diagnosed with attention deficit hyperactivity disorder (ADHD). The study contains 40 children. All children were between the ages of 7 and 12 years. Participants were classified into four groups which were ADHD (n=20), ADHD-I (ADHD-Inattentive type) (n=10), ADHD-C (ADHD-Combined type) (n=10), and control (n=20) groups. In this study, the frequency domain of EEG signals for ADHD, subtypes and control groups were analyzed and compared using Matlab software. The mean age of the ADHD children's group was 8.7 years and the control group 9.1 years. Spectral analysis of mean power (μV 2 ) and relative-mean power (%) was carried out for four different frequency bands: delta (0--4 Hz), theta (4--8 Hz), alpha (8--13 Hz) and beta (13--32 Hz). The ADHD and subtypes of ADHD-I, and ADHD-C groups had higher average power value of delta and theta band than that of control group. However, this is not the case for alpha and beta bands. Increases in delta/beta ratio and statistical significance were found only between ADHD-I and control group, and in delta/beta, theta/delta ratio statistical significance values were found to exist between ADHD-C and control group. EEG analyzes can be used as an alternative method when ADHD subgroups are identified.

Applicability of SREM to the Verification of Management Information System Software Requirements. Volume II.

DTIC Science & Technology

1981-04-30

f --tlu Final-Report: Applicability of SREM to the Verification of Management Information System Software Requirements, wtch was prepared for the Army...MA _________ TO ________ UTA 1ASE ___________ StMZ25. 70.aC. .. 3CA, c(ie m(Sl f :~ rin I : ruq in SBII Z tSI. M 4.7/.3 69.9 . MA S U/WA0 1.241.5 96.8...IR.D iTEM B-2 C4 .4 . I.I z- 0 44 f - U l c- I ao V. a, I. vv!N0 ~ q * a - i= - a ~ ePcu m ~ bft 0 = z z z z z Uz 4 P4 -F5 zz - -4 zzz z C6 z c. 0. 4 4 v

Annotated bibliography of software engineering laboratory literature

NASA Technical Reports Server (NTRS)

Kistler, David; Bristow, John; Smith, Don

1994-01-01

This document is an annotated bibliography of technical papers, documents, and memorandums produced by or related to the Software Engineering Laboratory. Nearly 200 publications are summarized. These publications cover many areas of software engineering and range from research reports to software documentation. This document has been updated and reorganized substantially since the original version (SEL-82-006, November 1982). All materials have been grouped into eight general subject areas for easy reference: (1) The Software Engineering Laboratory; (2) The Software Engineering Laboratory: Software Development Documents; (3) Software Tools; (4) Software Models; (5) Software Measurement; (6) Technology Evaluations; (7) Ada Technology; and (8) Data Collection. This document contains an index of these publications classified by individual author.

Behavioral and technological interventions targeting glycemic control in a racially/ethnically diverse population: a randomized controlled trial

PubMed Central

2014-01-01

Background Diabetes self-care by patients has been shown to assist in the reduction of disease severity and associated medical costs. We compared the effectiveness of two different diabetes self-care interventions on glycemic control in a racially/ethnically diverse population. We also explored whether reductions in glycated hemoglobin (HbA1c) will be more marked in minority persons. Methods We conducted an open-label randomized controlled trial of 376 patients with type 2 diabetes aged ≥18 years and whose last measured HbA1c was ≥7.5% (≥58 mmol/mol). Participants were randomized to: 1) a Chronic Disease Self-Management Program (CDSMP; n = 101); 2) a diabetes self-care software on a personal digital assistant (PDA; n = 81); 3) a combination of interventions (CDSMP + PDA; n = 99); or 4) usual care (control; n = 95). Enrollment occurred January 2009-June 2011 at seven regional clinics of a university-affiliated multi-specialty group practice. The primary outcome was change in HbA1c from randomization to 12 months. Data were analyzed using a multilevel statistical model. Results Average baseline HbA1c in the CDSMP, PDA, CDSMP + PDA, and control arms were 9.4%, 9.3%, 9.2%, and 9.2%, respectively. HbA1c reductions at 12 months for the groups averaged 1.1%, 0.7%, 1.1%, and 0.7%, respectively and did not differ significantly from baseline based on the model (P = .771). Besides the participants in the PDA group reporting eating more high-fat foods compared to their counterparts (P < .004), no other significant differences were observed in participants’ diabetes self-care activities. Exploratory sub-analysis did not reveal any marked reductions in HbA1c for minority persons but rather modest reductions for all racial/ethnic groups. Conclusions Although behavioral and technological interventions can result in some modest improvements in glycemic control, these interventions did not fare significantly better than usual care in achieving glycemic control. More research is needed to understand how these interventions can be most effective in clinical practice. The reduction in HbA1c levels found in our control group that received usual care also suggests that good routine care in an integrated healthcare system can lead to better glycemic control. Trial registration Clinicaltrials.gov Identifier: NCT01221090. PMID:24450992

Building Your Own Web Course: The Case for Off-the-Shelf Component Software.

ERIC Educational Resources Information Center

Kaplan, Howard

1998-01-01

Compares the features, advantages, and disadvantages of two major software options available for designing web courses: (1) component, off-the shelf software that allows for creation of audio slide lectures, course materials, discussion forums, animations, synchronous chat groups, quiz creators, and electronic mail, and (2) integrated packages…

Designing Test Suites for Software Interactions Testing

DTIC Science & Technology

2004-01-01

the annual cost of insufficient software testing methods and tools in the United States is between 22.2 to 59.5 billion US dollars [13, 14]. This study...10 (2004), 1–29. [21] Cheng, C., Dumitrescu, A., and Schroeder , P. Generating small com- binatorial test suites to cover input-output relationships... Proceedings of the Conference on the Future of Software Engineering (May 2000), pp. 61 – 72. [51] Hartman, A. Software and hardware testing using

Effect of grinding and polishing on roughness and strength of zirconia.

PubMed

Khayat, Waad; Chebib, Najla; Finkelman, Matthew; Khayat, Samer; Ali, Ala

2018-04-01

The clinical applications of high-translucency monolithic zirconia restorations have increased. Chairside and laboratory adjustments of these restorations are inevitable, which may lead to increased roughness and reduced strength. The influence of grinding and polishing on high-translucency zirconia has not been investigated. The purpose of this in vitro study was to compare the roughness averages (Ra) of ground and polished zirconia and investigate whether roughness influenced strength after aging. High-translucency zirconia disks were milled, sintered, and glazed according to the manufacturer's recommendations. Specimens were randomized to 4 equal groups. Group G received only grinding; groups GPB and GPK received grinding and polishing with different polishing systems; and group C was the (unground) control group. All specimens were subjected to hydrothermal aging in an autoclave at 134°C at 200 kPa for 3 hours. Roughness average was measured using a 3-dimensional (3D) optical interferometer at baseline (Ra1), after grinding and polishing (Ra2), and after aging (Ra3). A biaxial flexural strength test was performed at a rate of 0.5 mm/min. Statistical analyses were performed using commercial software (α=.05). Group G showed a significantly higher mean value of Ra3 (1.96 ±0.32 μm) than polished and glazed groups (P<.001), which showed no statistically significant difference among them (GPB, 1.12 ±0.31 µm; GPK, 0.88 ±0.31 µm; C: 0.87 ±0.25 μm) (P>.05). Compared with baseline, the roughness of groups G and GPB increased significantly after surface treatments and after aging, whereas aging did not significantly influence the roughness of groups GPK or C. Group G showed the lowest mean value of biaxial flexural strength (879.01 ±157.99 MPa), and the highest value was achieved by group C (962.40 ±113.84 MPa); no statistically significant differences were found among groups (P>.05). Additionally, no significant correlation was detected between the Ra and flexural strength of zirconia. Grinding increased the roughness of zirconia restorations, whereas proper polishing resulted in smoothness comparable with glazed surfaces. The results provide no evidence that grinding and polishing affect the flexural strength of zirconia after aging. Copyright © 2017 Editorial Council for the Journal of Prosthetic Dentistry. Published by Elsevier Inc. All rights reserved.

Software engineering laboratory series: Annotated bibliography of software engineering laboratory literature

NASA Technical Reports Server (NTRS)

Morusiewicz, Linda; Valett, Jon

1992-01-01

This document is an annotated bibliography of technical papers, documents, and memorandums produced by or related to the Software Engineering Laboratory. More than 100 publications are summarized. These publications cover many areas of software engineering and range from research reports to software documentation. This document has been updated and reorganized substantially since the original version (SEL-82-006, November 1982). All materials have been grouped into eight general subject areas for easy reference: (1) the Software Engineering Laboratory; (2) the Software Engineering Laboratory: Software Development Documents; (3) Software Tools; (4) Software Models; (5) Software Measurement; (6) Technology Evaluations; (7) Ada Technology; and (8) Data Collection. This document contains an index of these publications classified by individual author.

A Strategic Defense Initiative Organization Software Testing Initiative

DTIC Science & Technology

1990-10-01

One group of researchers is investigating a version of this analysis termed constrained expression analysis [Dillon 1988c]. Here a design is...examined. Academic researchers will assist in developing experiments. In addition, an organization or group of people will be identified 14 as the focal...to make the transition into common practice. Research is being conducted into control -based test data adequacy criteria to support the dynamic

Software For Computing Reliability Of Other Software

NASA Technical Reports Server (NTRS)

Nikora, Allen; Antczak, Thomas M.; Lyu, Michael

1995-01-01

Computer Aided Software Reliability Estimation (CASRE) computer program developed for use in measuring reliability of other software. Easier for non-specialists in reliability to use than many other currently available programs developed for same purpose. CASRE incorporates mathematical modeling capabilities of public-domain Statistical Modeling and Estimation of Reliability Functions for Software (SMERFS) computer program and runs in Windows software environment. Provides menu-driven command interface; enabling and disabling of menu options guides user through (1) selection of set of failure data, (2) execution of mathematical model, and (3) analysis of results from model. Written in C language.

Efficacy of platelet rich fibrin in the treatment of human intrabony defects with or without bone graft: A randomized controlled trial

PubMed Central

Chandradas, Nikhil D.; Ravindra, Shivamurthy; Rangaraju, Vivekananda M.; Jain, Sheetal; Dasappa, Shivaprasad

2016-01-01

Aim: To evaluate the efficacy of platelet rich fibrin (PRF) with or without bone graft [demineralized bone matrix (DBM) graft] in the treatment of intrabony defects based on clinical and radiographic parameters. Materials and Methods: Thirty six intrabony defects in 36 patients were randomly divided into three different groups and were treated with group A (PRF with DBM) or group B (PRF alone) or group C [open flap debridement (OFD)]. Clinical parameters such as plaque index (PI), gingival index (GI), probing depth (PD), relative attachment level (RAL), and gingival recession (GR) were assessed at baseline and 9 months postoperatively; radiographic parameters such as linear bone growth (LBG) and percentage in bone fill (%BF) were calculated by using the image analysis software. Comparisons of groups were analyzed using Kruskal–Wallis analysis of variance test. Pair-wise comparison of groups was done by Mann-Whitney U test. Results: Mean PD reduction and RAL gain were greater in group A (4.25 ± 1.48, 3.92 ± 0.90) and group B (3.82 ± 0.75, 3.27 ± 0.65) than control (3.00 ± 1.21, 2.25 ± 0.62). Furthermore, statistically significant improvement in LBG and %BF was found in group A (3.47 ± 0.53, 61.53 ± 4.54) compared to group B (2.55 ± 0.61, 49.60 ± 14.08) and group C (1.21 ± 0.80, 24.69 ± 15.59). Conclusions: The study demonstrated that PRF improves clinical and radiological parameters compared to OFD alone in intrabony defects. Addition of DBM enhances the effects of PRF in RAL gain and radiographic defect fill. PMID:27652249

The Assistant for Specifying the Quality Software (ASQS) Operational Concept Document. Volume 1

DTIC Science & Technology

1990-09-01

Assistant in which the manager supplies system-specific characteristics and needs and the Assistant fills in the software quality concepts and methods. The...member(s) of the Computer Resources Working Group (CRWG) to aid in performing a software quality engineering study. Figure 3.4-1 outlines the...need to recovery from faults more likely than need _o provide alternative functions or interfaces), and more on Autcncmy - 27 - that Modularity

[Biomechanical investigation of the tensile strength of tendon sutures - locking sutures increase stability].

PubMed

Betz, C; Schleicher, P; Winkel, R; Hoffmann, R

2013-02-01

In this study we examined the tensile strength of core sutures of tendons. In particular, we examined the effect of having 2 or 4 stitch strands in the core suture as well as the effect of additional locking sutures on the tensile strength. 60 flexor tendons from the forepaws of freshly slaughtered swines were harvested for biomechanical testing. They were divided into 4 groups (A, B, C and D) of 15 sutures each. Group A: core suture after Zechner with 2 strands; group B: modified core suture with 4 strands; group C: modified core suture with 2 strands and 4 locking sutures; group D: modified core suture with 4 strands and 4 locking sutures. The primary tensile strength of the sutures was measured in Newton using the testing machine with a traction speed of 0.1 mm/s. Simultaneously, the increasing space forming at the suture was filmed against graph paper. Our command variables were force measured in Newton when forming a space of 2 mm as well as the force at which the suture failed. Statistical analysis was carried out with the software SPSS to produce a multivariate analysis with a statistical significance of p<0.05. Results are presented as averages including the 1st and 3rd quartile (1Q/3Q). Under traction to form a 2 mm space, the force measured with group A was 14.2 N (12.9/15.1 N). In group B the force 22.5 N (20.0/24.7 N) was significantly higher (p<0.05). Group C required a traction force of 28.7 N (23.5/35.8 N) which was significantly higher than for groups A and B. Group D required the significantly highest traction force of 42.0 N (39.5/46.0 N) to produce a 2 mm space. The force required for the suture to fail in group A was 19.9 N (17.9/22.8 N), in group B: 26.2 N (24.5/29.7 N), in group C 32.0 N (27.1/40.1 N) and in Group D 46.5 N (41.5/50.0 N); the differences between the gloups were all statistically significant. The primary tensile strength of core sutures after Zechner on flexor tendons from the forepaws of swines was significantly increased by doubling the number of sutures and also by use of 4 additional locking sutures. © Georg Thieme Verlag KG Stuttgart · New York.

Investigation of biological effects of some Mannich Bases containing Bis-1,2,4- Triazole.

PubMed

Parlak, A E; Celik, S; Karatepe, M; Turkoglu, S; Alayunt, N O; Dastan, S D; Ulas, M; Sandal, S; Tekin, S; Koparir, M

2016-06-30

In this study, the effects of Mannich bases containing bis-1,2,4-triazole on the levels of in vivo malondialdehyde (MDA) and antioxidant vitamins (A, E, C) were examined in serum, livers and kidneys of rats. DA and vitamin (A, E, C) levels were determined by high performance liquid chromatography (HPLC). Antioxidant effect was investigated by determining the MDA levels in Saccharomyces cerevisiae cells as in vitro. Furthermore, the antitumor effects of compounds were investigated against MCF-7 human breast cancer cells. Interrelations of results among control and compound groups were evaluated using SPSS statistical software package. As a result, some of the compounds showed effective biological activity when compared to control conditions. The test compounds used in this study may be effective for utilization in the selection and design of model compounds for further studies.

Three-Dimensional Audio Client Library

NASA Technical Reports Server (NTRS)

Rizzi, Stephen A.

2005-01-01

The Three-Dimensional Audio Client Library (3DAudio library) is a group of software routines written to facilitate development of both stand-alone (audio only) and immersive virtual-reality application programs that utilize three-dimensional audio displays. The library is intended to enable the development of three-dimensional audio client application programs by use of a code base common to multiple audio server computers. The 3DAudio library calls vendor-specific audio client libraries and currently supports the AuSIM Gold-Server and Lake Huron audio servers. 3DAudio library routines contain common functions for (1) initiation and termination of a client/audio server session, (2) configuration-file input, (3) positioning functions, (4) coordinate transformations, (5) audio transport functions, (6) rendering functions, (7) debugging functions, and (8) event-list-sequencing functions. The 3DAudio software is written in the C++ programming language and currently operates under the Linux, IRIX, and Windows operating systems.

Group Support Systems (GSS)

NASA Technical Reports Server (NTRS)

Hamel, Gary P.; Wijesinghe, R.

1996-01-01

Groupware is a term describing an emerging computer software technology enhancing the ability of people to work together as a group, (a software driven 'group support system'). This project originated at the beginning of 1992 and reports were issued describing the activity through May 1995. These reports stressed the need for process as well as technology. That is, while the technology represented a computer assisted method for groups to work together, the Group Support System (GSS) technology als required an understanding of the facilitation process electronic meetings demand. Even people trained in traditional facilitation techniques did not necessarily aimlessly adopt groupware techniques. The latest phase of this activity attempted to (1) improve the facilitation process by developing training support for a portable groupware computer system, and (2) to explore settings and uses for the portable groupware system using different software, such as Lotus Notes.

Statistical Analysis Software for the TRS-80 Microcomputer.

DTIC Science & Technology

1981-09-01

1160 3 W640 : KSa3 ; GOSUB 760 1170 CLS : PRINT"Is the variance known?" 1190 ZP64: TI"’T" 1 T2S-N : CIOSU1 710 1190 IF 70- en " OR mO"N" 0070 1250 1200...Paul Isbell September 1981 C--) Thesis Advisor: Charles F. Taylor, Jr. LLU __ Approved for public release; distribution unlimited C. 3 - ? 01 12 032...ACCUIiON no . 3 . 1CIPIIT*S CATALOG NMUNIRO, 4. TITLE (god Su feiej) S. TYPE OP MI[PORT 6 PEIOo COVI[EO Stastical Analysis Software for the Master’s Thesis

C-Language Integrated Production System, Version 5.1

NASA Technical Reports Server (NTRS)

Riley, Gary; Donnell, Brian; Ly, Huyen-Anh VU; Culbert, Chris; Savely, Robert T.; Mccoy, Daniel J.; Giarratano, Joseph

1992-01-01

CLIPS 5.1 provides cohesive software tool for handling wide variety of knowledge with support for three different programming paradigms: rule-based, object-oriented, and procedural. Rule-based programming provides representation of knowledge by use of heuristics. Object-oriented programming enables modeling of complex systems as modular components. Procedural programming enables CLIPS to represent knowledge in ways similar to those allowed in such languages as C, Pascal, Ada, and LISP. Working with CLIPS 5.1, one can develop expert-system software by use of rule-based programming only, object-oriented programming only, procedural programming only, or combinations of the three.

European Software Engineering Process Group Conference (2nd Annual), EUROPEAN SEPG󈨥. Delegate Material, Conference

DTIC Science & Technology

1997-06-19

states, and six of the top ten suppliers of software with the lowest defect levels are also EU member states Kerry Hanson, Director TI ex White House OST...6,M 0"M *" changes Defects reported by customers STeraQuest S ofOR Wednsday 18 Jlue (C303) 5-3 lE’s IDEAL Model organizational analyze lss.ons exeute...Indicator used to track non discretionary maintenance, enhancements, and defect corrections as well as the number of open trouble reports. 17 *Enterprise

Standard CMMI Appraisal Method for Process Improvement (SCAMPI) A, Version 1.3: Method Definition Document

DTIC Science & Technology

2011-03-01

performance of Federal Government Contract Number FA8721-05- C -0003 with Carnegie Mellon University for the operation of the Software Engineering... C Roles and Responsibilities 195 Appendix D Reporting Requirements and Options 201 Appendix E Managed Discovery 203 Appendix F Scoping and...Upgrade Team (SUT) • Mary Busby , Lockheed Martin • Palma Buttles-Valdez, Software Engineering Institute • Paul Byrnes, Integrated System Diagnostics

Consolidated Cab Display (CCD) System, Project Planning Document (PPD),

DTIC Science & Technology

1981-02-01

1980 1981 I 2 3 4 5 6 7 8 9 10 1112 1 2 3 4 5 6 7 8 9 1011112 1 2 31 12. Software Documentation a. Overall Computer Program Description ( OCPD ) b...Approve OCPD c. Computer Program Functional Specifications (CPFS) d. Data Base Table Design Specification (DBTDS) e. Software Interface Control Document...Parts List Master Pattern and Plan View Reproducible Drawings Instruction Book Training Aids/Materials b. Software: OCPD CPFS SI CD PDS DBTDS SDD

Evolving Attractive Faces Using Morphing Technology and a Genetic Algorithm: A New Approach to Determining Ideal Facial Aesthetics

PubMed Central

Wong, Brian J. F.; Karmi, Koohyar; Devcic, Zlatko; McLaren, Christine E.; Chen, Wen-Pin

2013-01-01

Objectives The objectives of this study were to: 1) determine if a genetic algorithm in combination with morphing software can be used to evolve more attractive faces; and 2) evaluate whether this approach can be used as a tool to define or identify the attributes of the ideal attractive face. Study Design Basic research study incorporating focus group evaluations. Methods Digital images were acquired of 250 female volunteers (18–25 y). Randomly selected images were used to produce a parent generation (P) of 30 synthetic faces using morphing software. Then, a focus group of 17 trained volunteers (18–25 y) scored each face on an attractiveness scale ranging from 1 (unattractive) to 10 (attractive). A genetic algorithm was used to select 30 new pairs from the parent generation, and these were morphed using software to produce a new first generation (F1) of faces. The F1 faces were scored by the focus group, and the process was repeated for a total of four iterations of the algorithm. The algorithm mimics natural selection by using the attractiveness score as the selection pressure; the more attractive faces are more likely to morph. All five generations (P-F4) were then scored by three focus groups: a) surgeons (n = 12), b) cosmetology students (n = 44), and c) undergraduate students (n = 44). Morphometric measurements were made of 33 specific features on each of the 150 synthetic faces, and correlated with attractiveness scores using univariate and multivariate analysis. Results The average facial attractiveness scores increased with each generation and were 3.66 (+0.60), 4.59 (±0.73), 5.50 (±0.62), 6.23 (±0.31), and 6.39 (±0.24) for P and F1–F4 generations, respectively. Histograms of attractiveness score distributions show a significant shift in the skew of each curve toward more attractive faces with each generation. Univariate analysis identified nasal width, eyebrow arch height, and lip thickness as being significantly correlated with attractiveness scores. Multivariate analysis identified a similar collection of morphometric measures. No correlation with more commonly accepted measures such as the length facial thirds or fifths were identified. When images are examined as a montage (by generation), clear distinct trends are identified: oval shaped faces, distinct arched eyebrows, and full lips predominate. Faces evolve to approximate the guidelines suggested by classical canon. F3 and F4 generation faces look profoundly similar. The statistical and qualitative analysis indicates that the algorithm and methodology succeeds in generating successively more attractive faces. Conclusions The use of genetic algorithms in combination with a morphing software and traditional focus-group derived attractiveness scores can be used to evolve attractive synthetic faces. We have demonstrated that the evolution of attractive faces can be mimicked in software. Genetic algorithms and morphing provide a robust alternative to traditional approaches rooted in comparing attractiveness scores with a series of morphometric measurements in human subjects. PMID:18401273

Low temperature growth of Ga 1- xIn xP bulk crystals from InSb-rich melt

NASA Astrophysics Data System (ADS)

Gennett, A.; Lewis, D.; Dutta, P. S.

2010-04-01

Bulk growth of phosphorus and arsenic based ternary III-V semiconductor crystals using pseudo-binary melts such as GaP-InP, GaP-GaAs, AlAs-GaAs, etc. is significantly challenging due to the high vapor pressures of group V species in conjunction with slow growth rates and the need for melt replenishment and mixing during growth. Lowering the growth temperature is desirable such that the vapor pressures of P and As can be easily handled. Low growth temperatures could be achieved by using Ga or In rich solutions. However, this approach is less attractive for growing bulk crystals due to several experimental difficulties including sticking of the growth solution to the crucible wall and to the grown crystal, making it challenging for crystal extraction. Growth of ternary crystals from low temperature quaternary melts has been found to be attractive. In this paper, we will present a new method for the growth of Ga 1- xIn xP from InSb rich Ga 1- xIn xP ySb 1- y melts at low growth temperatures in the range of 800-1050 °C. Thermodynamic phase diagrams calculated at various temperatures using a Gibbs free energy minimization software and materials databases commercially available from Thermo-Calc software will be presented along with experimental validation for Ga 1- xIn xP crystals grown at 1000 °C.

78 FR 45096 - Standards for Business Practices and Communication Protocols for Public Utilities

Federal Register 2010, 2011, 2012, 2013, 2014

2013-07-26

... processing software should be filed in native applications or print-to-PDF format and not in a scanned format... relevant part sub nom. Transmission Access Policy Study Group v. FERC, 225 F.3d 667 (D.C. Cir. 2002), aff'd...

Correlation between occlusion and cervical posture in patients with bruxism.

PubMed

Cesar, Guilherme Manna; Tosato, Juliana de Paiva; Biasotto-Gonzalez, Daniela Ap

2006-08-01

The goal of this study was to evaluate head and neck posture in the rest position of patients with bruxism and patients without temporomandibular disorder signs or symptoms to further relate them with Angle's class of malocclusion. Fifty-six volunteers participated in this study, ages 18 to 27 years with an average age of 22.5 years. They were divided into 2 groups: Group B--28 subjects with parafunctions (teeth grinding or clenching); and Group C--28 subjects without parafunctional habits (control group). All participants were photographed, and their pictures were analyzed and compared with the software Alcimagem (Instrumental Concept and Movement Analysis Laboratory, Uberlândia, Minas Gerais, Brazil). The results demonstrated that variation of angular values did not present statistical difference for the studied groups. Regarding Angle's class of malocclusion, class I was predominant in Group C, and classes II and III were predominant in Group B. The mental-sternal angle calculated did not present statistical significance between the groups; however, there was a greater variation between the smaller angle and the higher angle in Group B, contrary to Group C.

The Antinociceptive Effects of Hydroalcoholic Extract of Borago Officinalis Flower in Male Rats Using Formalin Test.

PubMed

Shahraki, Mohammad Reza; Ahmadimoghadm, Mahdieh; Shahraki, Ahmad Reza

2015-10-01

Borago officinalis flower (borage) is a known sedative in herbal medicine; the aim of the present study was to evaluate the antinociceptive effect of borage hydroalcoholic extract in formalin test male rats. Fifty-six adult male albino Wistar rats were randomly divided into seven groups: Control groups of A (intact), B (saline), and C (Positive control) plus test groups of D, E, F, and G (n=8). The groups D, E, and F received 6.25, 12.5, and 25 mg/kg, Borago officinalis flower hydroalcholic extract before the test, respectively but group G received 25 mg/kg borage extract and aspirin before the test. A biphasic pain was induced by injection of formalin 1%. The obtained data were analyzed by SPSS software ver. 17 employing statistical tests of Kruskal-Wallis and Mann-Whitney. The results were expressed as mean±SD. Statistical differences were considered significant at P<0.05. The results revealed that the acute and chronic pain behavior score in test groups of D, E, F, and G significantly decreased compared to groups A and B, but this score did not show any difference compared to group C. Moreover, chronic pain behavior score in group G was significantly lower than all other groups. The results indicated that Borago officinalis hydroalcoholic extract affects the acute and chronic pain behavior response in formaline test male rats.

Analysis of three surgical treatments for spontaneous supratentorial intracerebral hemorrhage.

PubMed

Cai, Qiang; Zhang, Huaping; Zhao, Dong; Yang, Zhaohui; Hu, Keqi; Wang, Long; Zhang, Wenfei; Chen, Zhibiao; Chen, Qianxue

2017-10-01

This retrospective study aimed to evaluate the effectiveness and safety of 3 surgical procedures for Spontaneous Supratentorial Intracerebral Hemorrhage (SICH).A total of 63 patients with SICH were randomized into 3 groups. Group A (n = 21) underwent craniotomy surgery, group B (n = 22) underwent burr hole, urokinase infusion and catheter drainage, and group C (n = 20) underwent neuroendoscopic surgery. The hematoma evacuation rate of the operation was analyzed by 3D Slice software and the average surgery time, visualization during operation, decompressive effect, mortality, Glasgow Coma Scale (GCS) improvement, complications include rebleeding, pneumonia, intracranial infection were also compared among 3 groups.All procedures were successfully completed and the hematoma evacuation rate was significant differences among 3 groups which were 79.8%, 43.1%, 89.3% respectively (P < .01), and group C was the highest group. Group B was smallest traumatic one and shared the shortest operation time, but for the lack of hemostasis, it also the highest rebleeding group (P = .03). Although there were different in complications, but there was no significant in pneumonia, intracranial infection, GCS improvement and mortality rate.All these 3 methods had its own advantages and shortcomings, and every approach had its indications for SICH. Although for neuroendoscopic technical's minimal invasive, direct vision, effectively hematoma evacuation rate, and the relatively optimistic result, it might be a more promising approach for SICH.

Analysis of three surgical treatments for spontaneous supratentorial intracerebral hemorrhage

PubMed Central

Cai, Qiang; Zhang, Huaping; Zhao, Dong; Yang, Zhaohui; Hu, Keqi; Wang, Long; Zhang, Wenfei; Chen, Zhibiao; Chen, Qianxue

2017-01-01

Abstract This retrospective study aimed to evaluate the effectiveness and safety of 3 surgical procedures for Spontaneous Supratentorial Intracerebral Hemorrhage (SICH). A total of 63 patients with SICH were randomized into 3 groups. Group A (n = 21) underwent craniotomy surgery, group B (n = 22) underwent burr hole, urokinase infusion and catheter drainage, and group C (n = 20) underwent neuroendoscopic surgery. The hematoma evacuation rate of the operation was analyzed by 3D Slice software and the average surgery time, visualization during operation, decompressive effect, mortality, Glasgow Coma Scale (GCS) improvement, complications include rebleeding, pneumonia, intracranial infection were also compared among 3 groups. All procedures were successfully completed and the hematoma evacuation rate was significant differences among 3 groups which were 79.8%, 43.1%, 89.3% respectively (P < .01), and group C was the highest group. Group B was smallest traumatic one and shared the shortest operation time, but for the lack of hemostasis, it also the highest rebleeding group (P = .03). Although there were different in complications, but there was no significant in pneumonia, intracranial infection, GCS improvement and mortality rate. All these 3 methods had its own advantages and shortcomings, and every approach had its indications for SICH. Although for neuroendoscopic technical's minimal invasive, direct vision, effectively hematoma evacuation rate, and the relatively optimistic result, it might be a more promising approach for SICH. PMID:29069046

Software for C1 interpolation

NASA Technical Reports Server (NTRS)

Lawson, C. L.

1977-01-01

The problem of mathematically defining a smooth surface, passing through a finite set of given points is studied. Literature relating to the problem is briefly reviewed. An algorithm is described that first constructs a triangular grid in the (x,y) domain, and first partial derivatives at the modal points are estimated. Interpolation in the triangular cells using a method that gives C sup.1 continuity overall is examined. Performance of software implementing the algorithm is discussed. Theoretical results are presented that provide valuable guidance in the development of algorithms for constructing triangular grids.

Ada Implementation Guide. Software Engineering With Ada. Volume 1

DTIC Science & Technology

1994-04-01

Staff, Department ofDefense Dictionary of Military and Associated Terms, Washington, D.C., 1989. STARS McDonal , C., and S . Redwine, *STARS Glossary: A...ADýA28 357> offj I Volume I I SI I t Ada Implementation II Guide 5 Software Engineering With AdaI I S DTIC QUALITY INSPECTED S 5 April 1994 g " 94...and Abbreviations ...................... I I N p a S I I I i I Libt of F4g u OW Tahl Figures 2-1 DON Directives and Instructions for Implementing Public

Annotated bibliography of Software Engineering Laboratory literature

NASA Technical Reports Server (NTRS)

1985-01-01

An annotated bibliography of technical papers, documents, and memorandums produced by or related to the Software Engineering Laboratory is presented. More than 100 publications are summarized. These publications are summarized. These publications cover many areas of software engineering and range from research reports to software documentation. This document has been updated and reorganized substantially since the original version (SEL-82-006, November 1982). All materials are grouped into five general subject areas for easy reference: (1) the software engineering laboratory; (2) software tools; (3) models and measures; (4) technology evaluations; and (5) data collection. An index further classifies these documents by specific topic.

BGen: A UML Behavior Network Generator Tool

NASA Technical Reports Server (NTRS)

Huntsberger, Terry; Reder, Leonard J.; Balian, Harry

2010-01-01

BGen software was designed for autogeneration of code based on a graphical representation of a behavior network used for controlling automatic vehicles. A common format used for describing a behavior network, such as that used in the JPL-developed behavior-based control system, CARACaS ["Control Architecture for Robotic Agent Command and Sensing" (NPO-43635), NASA Tech Briefs, Vol. 32, No. 10 (October 2008), page 40] includes a graph with sensory inputs flowing through the behaviors in order to generate the signals for the actuators that drive and steer the vehicle. A computer program to translate Unified Modeling Language (UML) Freeform Implementation Diagrams into a legacy C implementation of Behavior Network has been developed in order to simplify the development of C-code for behavior-based control systems. UML is a popular standard developed by the Object Management Group (OMG) to model software architectures graphically. The C implementation of a Behavior Network is functioning as a decision tree.

Cost Estimation Techniques for C3I System Software.

DTIC Science & Technology

1984-07-01

opment manmonth have been determined for maxi, midi , and mini .1 type computers. Small to median size timeshared developments used 0.2 to 1.5 hours...development schedule 1.23 1.00 1.10 2.1.3 Detailed Model The final codification of the COCOMO regressions was the development of separate effort...regardless of the software structure level being estimated: D8VC -- the expected development computer (maxi. midi . mini, micro) MODE -- the expected

Effect of symbiotic supplementation on glycemic control, lipid profiles and microalbuminuria in patients with non-obese type 2 diabetes: a randomized, double-blind, clinical trial.

PubMed

Ebrahimi, Zarin Sadat; Nasli-Esfahani, Ensieh; Nadjarzade, Azadeh; Mozaffari-Khosravi, Hassan

2017-01-01

The prevalent raise of type 2 diabetes (T2D) around the globe, are creating higher risk for cardiovascular diseases (CVDs) and increasing strain on each country's health care budget in the world. Microalbuminuria has appeared as a key parameter in diabetic patients. Microalbuminuria is also related to increased cardiovascular morbidity in people who are non-obese diabetic. Some studies have suggested that consumption of symbiotic foods might help improve the metabolic profile, inflammatory factors and biomarkers of oxidative stress. The aim of trial was to determine the effect of symbiotic supplementation on glycemic control, lipid profiles and microalbuminuria in non-obese T2D. In this randomized, double-blind, clinically controlled trial, 70 patients with T2D (28 females, 42 males) were randomly divided into two groups ( n  = 35 for each group). The symbiotic group (SG) consumed 500 mg/d of symbiotic supplementations containing probiotics (Lactobacillus family, Bifidobacterium family, Streptococus thermophilus), Prebiotics (Fructo oligosaccharide) and B group vitamins (1 mg), lactose (0.5 mg), malt-dextrin, magnesium saturate and the placebo group (PG) consumed capsules filled with row starch and also B group vitamins (1 mg), lactose (0.5 mg), malt-dextrin, magnesium saturate for 9 weeks. Fasting blood glucose (FBG), hemoglobin A1c (HbA1c), blood lipid profiles, 24-h dietary recalls, and anthropometric measurements were measured at the baseline and at the end of trial. SPSS software, version 16 was used to test the data and the results were expressed as mean ± standard deviation. Paired samples T-Test were used to compare continuous variables within groups. Comparison between different groups was performed through two independent samples T-Test. In the absence of normal distribution, the comparison between the groups was made using non-parametric Wilcoxon on signed ranks and Mann-Whitney tests. P values <0.05 was considered significant. Symbiotic supplementation decreased significantly, FBG ( P  = 0.05) and HbA1c (P < 0.01). There were no significant differences in lipid profiles within and between the groups at the end of study (P > 0.05). Microalbuminuria (P < 0.05) and HbA1c (P < 0.05) are increased significantly in PG at the end of the study. Furthermore, the mean changes of microalbuminuria and HbA1c experienced significant between the two groups. There was significant reduction in urea between two groups from baseline ( P  = 0.051). No significant changes in baseline were shown in creatinine among the two groups or within either groups (P > 0.05). The consumption of 500 mg/d symbiotic supplementation for 9 weeks could improve the HbA1c, BMI and Microalbuminuria in T2D. Although, No effect has been indicated on FBS, lipid profiles, urea and creatinine. The trial has been registered in the Iranian Registry of Clinical Trials IRCT2015072223284N1, identifier. Registered 21 May 2016 "retrospectively registered".

Comparison of posterior capsule opacification at 360-degree square edge hydrophilic and sharp edge hydrophobic acrylic intraocular lens in diabetic patients

PubMed Central

Bai, Ling; Zhang, Jin; Chen, Ling; Ma, Ting; Liang, Hou-Cheng

2015-01-01

AIM To compare posterior capsule opacification (PCO) degree and visual functions after phacoemulsification in eyes implanted with 360-degree square edge hydrophilic acrylic intraocular lens (IOL) (570C C-flex, Rayner) and sharp edge hydrophobic acrylic IOL (Sensar AR40e, AMO) in diabetic patients. METHODS Sixty diabetic patients underwent uneventful phacoemulsification and randomly implanted one of the two IOLs. The PCO value was measured by retroillumination photographs and Evaluation of Posterior Capsule Opacification (EPCO) 2000 image-analysis software at 1, 6, 12, and 24mo after surgery. Visual acuity, and contrast sensitivity in photopic and mesopic conditions were also examined at each follow up time point. The incidence of eye that required Nd:YAG laser posterior capsulotomy were also compared. RESULTS There was not any statistically significant difference in PCO scores between Rayner C-flex 570C group and Sensar AR40e group at each follow up time point. Visual acuity, Nd:YAG capsulotomy incidence and contrast sensitivity also had no significant difference during the 24mo follow-up. CONCLUSION For diabetic patients, Rayner 570C C-flex and Sensar AR40e IOLs are same effective for prevent PCO. The 360-degree square edge design maybe is a good alternative technique to improve PCO prevention. PMID:26309870

Comparison of posterior capsule opacification at 360-degree square edge hydrophilic and sharp edge hydrophobic acrylic intraocular lens in diabetic patients.

PubMed

Bai, Ling; Zhang, Jin; Chen, Ling; Ma, Ting; Liang, Hou-Cheng

2015-01-01

To compare posterior capsule opacification (PCO) degree and visual functions after phacoemulsification in eyes implanted with 360-degree square edge hydrophilic acrylic intraocular lens (IOL) (570C C-flex, Rayner) and sharp edge hydrophobic acrylic IOL (Sensar AR40e, AMO) in diabetic patients. Sixty diabetic patients underwent uneventful phacoemulsification and randomly implanted one of the two IOLs. The PCO value was measured by retroillumination photographs and Evaluation of Posterior Capsule Opacification (EPCO) 2000 image-analysis software at 1, 6, 12, and 24mo after surgery. Visual acuity, and contrast sensitivity in photopic and mesopic conditions were also examined at each follow up time point. The incidence of eye that required Nd:YAG laser posterior capsulotomy were also compared. There was not any statistically significant difference in PCO scores between Rayner C-flex 570C group and Sensar AR40e group at each follow up time point. Visual acuity, Nd:YAG capsulotomy incidence and contrast sensitivity also had no significant difference during the 24mo follow-up. For diabetic patients, Rayner 570C C-flex and Sensar AR40e IOLs are same effective for prevent PCO. The 360-degree square edge design maybe is a good alternative technique to improve PCO prevention.

Bomb-pulse 14C analysis combined with 13C and 15N measurements in blood serum from residents of Malmö, Sweden.

PubMed

Georgiadou, Elisavet; Stenström, Kristina Eriksson; Uvo, Cintia Bertacchi; Nilsson, Peter; Skog, Göran; Mattsson, Sören

2013-05-01

The (14)C content of 60 human blood serum samples from residents of Malmö (Sweden) in 1978, obtained from a biobank, has been measured to estimate the accuracy of (14)C bomb-pulse dating. The difference between the date estimated using the Calibomb software and sampling date varied between -3 ± 0.4 and +0.2 ± 0.5 years. The average age deviation of all samples was -1.5 ± 0.7 years, with the delay between production and consumption of foodstuffs being probably the dominating cause. The potential influence of food habits on the (14)C date has been evaluated using stable isotope δ(13)C and δ(15)N analysis and information about the dietary habits of the investigated individuals. Although the group consisting of lacto-ovo vegetarians and vegans (pooled group) was not completely separated from the omnivores in a stable isotopic trophic level diagram, this analysis proved to add valuable information on probable dietary habits. The age deviation of the sampling date from the respective Calibomb date was found strongly correlated with the δ(13)C values, probably due to influence from marine diet components. For the omnivore individuals, there were indications of seasonal effects on δ(13)C and the age deviation. No significant correlation was found between the age deviation and the δ(15)N values of any dietary group. No influence of sex or year of birth was found on neither the (14)C nor the δ(13)C and δ(15)N values of the serum samples. The data were also divided into two groups (omnivores and pooled group), based on the level of δ(15)N in the samples. The consumption of high δ(15)N-valued fish and birds can be responsible for this clustering.

Impact of reduced-radiation dual-energy protocols using 320-detector row computed tomography for analyzing urinary calculus components: initial in vitro evaluation.

PubMed

Cai, Xiangran; Zhou, Qingchun; Yu, Juan; Xian, Zhaohui; Feng, Youzhen; Yang, Wencai; Mo, Xukai

2014-10-01

To evaluate the impact of reduced-radiation dual-energy (DE) protocols using 320-detector row computed tomography on the differentiation of urinary calculus components. A total of 58 urinary calculi were placed into the same phantom and underwent DE scanning with 320-detector row computed tomography. Each calculus was scanned 4 times with the DE protocols using 135 kV and 80 kV tube voltage and different tube current combinations, including 100 mA and 570 mA (group A), 50 mA and 290 mA (group B), 30 mA and 170 mA (group C), and 10 mA and 60 mA (group D). The acquisition data of all 4 groups were then analyzed by stone DE analysis software, and the results were compared with x-ray diffraction analysis. Noise, contrast-to-noise ratio, and radiation dose were compared. Calculi were correctly identified in 56 of 58 stones (96.6%) using group A and B protocols. However, only 35 stones (60.3%) and 16 stones (27.6%) were correctly diagnosed using group C and D protocols, respectively. Mean noise increased significantly and mean contrast-to-noise ratio decreased significantly from groups A to D (P <.05). In addition, the effective dose decreased markedly from groups A to D at 3.78, 1.81, 1.07, and 0.37 mSv, respectively. Decreasing the DE tube currents from 100 mA and 570 mA to 50 mA and 290 mA resulted in 96.6% accuracy for urinary calculus component analysis while reducing patient radiation exposure to 1.81 mSv. Further reduction of tube currents may compromise diagnostic accuracy. Copyright © 2014 Elsevier Inc. All rights reserved.

Effect of number and position of intraocular lens haptics on anterior capsule contraction: a randomized, prospective trial.

PubMed

Choi, Mihyun; Lazo, Marjorie Z; Kang, Minji; Lee, Jeehye; Joo, Choun-Ki

2018-03-20

The present study aimed to evaluate the degree of anterior capsule contraction (capsulorhexis contraction) with three different single-piece, hydrophilic acrylic intraocular lenses (IOLs). Patients were prospectively randomized to be implanted with one of three types of IOLs during cataract surgery: the Ophtec Precizon (IOL A), the Lucid Korea Microflex (IOL B), and the Carl Zeiss Asphina (IOL C). One week, 2 weeks, and 6 months after surgery, the area of the anterior capsule opening was measured using digital retro-illumination images after dilation of the pupil. The data were then evaluated using POCOman software. The study included 236 eyes of 202 patients. The area of the anterior capsule opening reduced by 3.53 ± 3.31 mm (17.06% ± 15.99%) between 1 week and 2 months post-operatively in the IOL A group, by 0.62 ± 1.32 mm (2.87% ± 6.03%) in the IOL B group, and by 1.09 ± 1.53 mm (4.72% ± 6.10%) in the IOL C group. The IOL B group showed minimal anterior capsule contraction 2 months after surgery (p < 0.001). IOLs with a four-plate haptic design (IOL B) showed more anterior capsular stability than those with a two-loop plate haptic (IOL A) or two-plate haptic (IOL C) design. The number and position of haptics in a capsular bag may affect anterior capsule contraction. We assume that supporting the zonules evenly may play a role in anterior capsular stability. Current Controlled Trials ISRCTN76566080 , Retrospectively registered (Date of registration: 14 Feb 2018).

78 FR 78939 - 36(b)(1) Arms Sales Notification

Federal Register 2010, 2011, 2012, 2013, 2014

2013-12-27

... Quantity or Quantities of Articles or Services under Consideration for Purchase: C-130J technical, engineering and software support; software updates and patches; familiarization training for Portable Flight... and contractor technical support services; and other related elements of logistics and program support...

Association between C677T and A1298C polymorphisms of the MTHFR gene and risk of male infertility: a meta-analysis.

PubMed

Yang, Y; Luo, Y Y; Wu, S; Tang, Y D; Rao, X D; Xiong, L; Tan, M; Deng, M Z; Liu, H

2016-04-26

Published studies on the association between the C677T and A1298C polymorphisms of the methylenetetrahydrofolate reductase (MTHFR) gene and male infertility risk are controversial. To obtain a more precise evaluation, we performed a meta-analysis based on published case-control studies. We conducted an electronic search of PubMed, EMBASE, the Cochrane Library, the Web of Science, and the China Knowledge Resource Integrated Database for papers on MTHFR gene C677T and A1298C polymorphisms and male infertility risk. Pooled odds ratios (ORs) with 95% confidence intervals (95%CIs) were used to assess the strength of association in homozygote, heterozygote, dominant, recessive, and additive models. Statistical heterogeneity, test of publication bias, and sensitivity analysis were carried out using the STATA software (Version 13.0). Overall, 21 studies of C677T (4505 cases and 4024 controls) and 13 studies of A1298C (2785 cases and 3094 controls) were included in this meta-analysis. For C677T, the homozygote comparison results were OR = 1.629, 95%CI (1.215- 2.184), and the recessive model results were OR = 1.462 (1.155- 1.850). For A1298C, the homozygote comparison results were OR = 1.289 (1.029-1.616), and the recessive model results were OR = 1.288 (1.034-1.604). In conclusion, the current meta-analysis showed that the MTHFR C677T polymorphism was associated with a significantly increased male infertility risk in the Asian and overall populations, but not in the Caucasian population, and there was a significant association between the A1298C polymorphism and male infertility risk in the Asian, Caucasian, and overall groups.

Evaluation of various active surveillance protocols in prostate cancer.

PubMed

Yılmaz, Kayhan; Karadeniz, Tahir; Ozkaptan, Orkunt; Yilanoglu, Oguz

2014-06-30

This study aims to investigate whether pathology results obtained by radical retropubic prostatectomy (RRP) were correlated with active surveillance (AS) criteria defined by Klotz, Soloway and D'Amico. In our clinic we evaluated 211 patients with diagnosis of localized prostate cancer who underwent RRP between 2007 and 2012. AS criteria defined by Soloway (cT ≤ T2, PSA ≤ 15 ng/dl, Gleason ≤ 6), Klotz (cT1c-T2a; if age ≥ 70 PSA ≤ 15 ng/dl, if age < 70 PSA ≤ 10 ng/dl; if age ≥ 70 Gleason ≤ 7(3+4), if age < 70 Gleason ≤ 6) and D'Amico (cT1c-T2a, PSA ≤ 10 ng/dl, Gleason ≤ 6) were used in our study. Pathological stages and Gleason scores were evaluated with coherence to AS protocols, mis-staging rates, biochemical recurrence (BC) of the mis-staged patients and death due to prostate cancer Data was analyzed using NCSS 2007 & PASS 2008 Statistical Software (Utah, USA). Chi square test and Mann-Whitney U test were applied for analyzing qualitative data. Significance was determined as p < 0.05. 137 (64.9%) patients were coherent with Soloway AS criteria, 118 (55.9%) with Klotz AS criteria and 108 (51.1%) with D'Amico AS criteria. Histopathological results of the patients grouped according to Soloway, Klotz and D'Amico AS protocols showed high stage prostate cancer in 40 (29.2%), 32 (27%) and 27 (24.9%) patients, respectively. High grade prostate cancer rates in Soloway, Klotz, D'Amico groups were 55 (40.2%), 46 (38%) and 39 (36.1%); respectively. Misstaging rates of Soloway, Klotz and D'Amico AS protocols were determined as 65 (47.4%), 54 (45.5%) and 46 (42.5%), respectively. In the Soloway group BC rate was 21.9% in those with high stages. Relation between BC and high stage was found to be statistically significant (p < 0.05). Misstaging rates were relatively high in the three groups and there was no difference between the three groups in BC rates. Randomized studies with adequate follow up are needed.

[Effect of different heat treatment on the bonding strength of porcelain and Co-Cr alloy].

PubMed

Liao, Juan-kun; Ye, Jian-tao; Zhu, Feng; Zhang, Cui-cui; Wen, Xiao-shan; Zhang, Yi-ping; Li, Bo-hua

2011-12-01

To investigate and compare the effect of different heat treatment on the metal- ceramic bonding strength and the interfacial microstructure of the Co-Cr alloy. Thirty specimens were made according to ISO 9693,and then divided into 3 groups (n=10) through the measurements .Group A(degassed 60s):degassed and then maintained 60s in 980 degrees centigrade Group B(degassed 60s and preoxidation 60s): degassed and maintained 60s in 980 degrees centigrade, then were maintained continuously for 60s in 980 degrees centigrade after re-gassed,Group C(degassed 120s): degassed and maintained 120s in 980 degrees centigrade. The bonding strengths of the three groups were evaluated through three point bending test. Six specimens divided into 3 group were made in the same method to observe the metal-ceramic interface through scanning electronic microscope(SEM) and energy dispersive spectrum(EDS).The bonding strength data were analyzed using ANOVA and Bonferroni's test by SPSS13.0 software package. The mean value of bonding strength was (39.03±2.70)MPa for group A, (34.43±2.36)MPa for group B, (31.65±1.49)MPa for group C, respectively. There were significant difference between every two groups (P<0.05). SEM demonstrated that the width of interfacial transition layer was 12.3-16.4μm in group A, 15.2-21.8μm in group B and 26.3-32.2μm in group C. Higher metal-ceramic bonding strength for Co-Cr alloy will be formed under the situation of degassed,and maintained 60s in 980 degrees centigrade ; while extending degassed time, prolonging the heat maintained time and preoxidation after degassing will reduce metal-ceramic bonding strength.

Computer Program Development Specification for IDAMST Operational Flight Programs. Addendum 1. Executive Software.

DTIC Science & Technology

1976-11-01

system. b. Read different program configurations to reconfigure the software during flight. c. Write Digital Integrated Test System (DITS) results...associated witn > inor C):l.e Event must be Unlatched. The sole difference between a Latched ana an lnratcrec Condition is that upon the Scheduling...Table. Furthermore, the block of pointers for one Minor Cycle may be wholly contained witnir the Diock of ocinters for a different Minor Cycle. For

Standard CMMI (Registered Trademark) Appraisal Method for Process Improvement (SCAMPI (Service Mark)) A, Version 1.3: Method Definition Document

DTIC Science & Technology

2011-03-01

performance of Federal Government Contract Number FA8721-05- C -0003 with Carnegie Mellon University for the operation of the Software Engineering... C Roles and Responsibilities 195 Appendix D Reporting Requirements and Options 201 Appendix E Managed Discovery 203 Appendix F Scoping and...Upgrade Team (SUT) • Mary Busby , Lockheed Martin • Palma Buttles-Valdez, Software Engineering Institute • Paul Byrnes, Integrated System Diagnostics

Languages for Software-Defined Networks

DTIC Science & Technology

2013-02-01

1 Languages for Software-Defined Networks Nate Foster∗, Michael J. Freedman†, Arjun Guha∗, Rob Harrison‡, Naga Praveen Katta†, Christopher Monsanto ...2012. [12] “The Frenetic project.” http://www.frenetic-lang.org/, Sept. 2012. [13] N. Foster, R. Harrison, M. J. Freedman, C. Monsanto , J. Rexford...performance networks,” in ACM SIGCOMM, pp. 254–265, Aug. 2011. [15] C. Monsanto , N. Foster, R. Harrison, and D. Walker, “A compiler and run-time system for

The Domain-Specific Software Architecture Program

DTIC Science & Technology

1992-06-01

Kang, K.C; Cohen, S.C: Jess, J.A; Novak, W.E; Peterson, A.S. Feature- Oriented Domain Analysis ( FODA ) Feasibility Study. (CMU/SEI-90-TR-21, ADA235785...perspective of a con- trols engineer solving a problem using an iterative process of simulation and analysis . The CMU/SEI-92-SR-9 1 I ~math AnalysislP...for schedulability analysis and Markov processes for the determination of reliability. Software architectures are derived from these formal models. ORA

The effects of warmed intravenous fluids, combined warming (warmed intravenous fluids with humid-warm oxygen), and pethidine on the severity of shivering in general anesthesia patients in the recovery room

PubMed Central

Nasiri, Ahmad; Akbari, Ayob; Sharifzade, GholamReza; Derakhshan, Pooya

2015-01-01

Background: Shivering is a common complication of general and epidural anesthesia. Warming methods and many drugs are used for control of shivering in the recovery room. The present study is a randomized clinical trial aimed to investigate the effects of two interventions in comparison with pethidine which is the routine treatment on shivering in patients undergoing abdominal surgery with general anesthesia. Materials and Methods: Eighty-seven patients undergoing abdominal surgery by general anesthesia were randomly assigned to three groups (two intervention groups in comparison with pethidine as routine). Patients in warmed intravenous fluids group received pre-warmed Ringer serum (38°C), patients in combined warming group received pre-warmed Ringer serum (38°C) accompanied by humid-warm oxygen, and patients in pethidine group received intravenous pethidine routinely. The elapsed time of shivering and some hemodynamic parameters of the participants were assessed for 20 min postoperatively in the recovery room. Then the collected data were analyzed by software SPSS (v. 16) with the significance level being P < 0.05. Results: The mean of elapsed time in the warmed intravenous serum group, the combined warming group, and the pethidine group were 7 (1.5) min, 6 (1.5) min, and 2.8 (0.7) min, respectively, which was statistically significant (P < 0.05). The body temperatures in both combined warming and pethidine groups were increased significantly (P < 0.05). Conclusions: Combined warming can be effective in controlling postoperative shivering and body temperature increase. PMID:26793258

Structural study of a novel acetylide-thiourea derivative and its evaluation as a detector of benzene

NASA Astrophysics Data System (ADS)

Khairul, Wan M.; Daud, Adibah Izzati; Mohd Hanifaah, Noor Azura; Arshad, Suhana; Razak, Ibrahim Abdul; Zuki, Hafiza Mohamed; Erben, Mauricio F.

2017-07-01

The new derivative 1-hexanoyl-3-(4-p-tolylethynyl-phenyl)-thiourea (APHX) was synthesised by the addition reaction between 4[4-aminophenyl] ethynyltoluene and hexanoyl isothiocyanate in acetone. The acetylide group was incorporated by using Sonogashira cross-coupling reaction allowing for the preparation of acetylide-thiourea compound. APHX was then elucidated via single crystal X-ray crystallography analysis, spectroscopic and elemental analysis by Fourier Transform Infrared (FT-IR) spectroscopy, 1H and 13C Nuclear Magnetic Resonance (NMR), UV-visible analysis, CHNS-elemental analysis. APHX was also evaluated theoretically via density functional theory (DFT) approach. APHX was fabricated onto glass substrate via drop-cast technique prior to act as optical thin-film and its performance as volatile organic compounds (VOCs) sensor was investigated through the difference in UV-vis profile before and after exposure towards benzene. Preliminary findings revealed that APHX showed interaction towards benzene with about 48% sensitivity. According to thermogravimetric studies, APHX showed good thermal stability, without decomposition up to ca. 190 °C. Whilst, crystal structure of APHX consists in a nearly planar acylthiourea moiety with the Cdbnd O and Cdbnd S bonds utilizing trans position, favoring by an intramolecular Nsbnd H⋯Odbnd C hydrogen bonds. The alkyl chain is oriented 90° with respect to acylthiourea group. The phenyls group in the 1-methyl-4-(phenylethynyl)benzene moieties are mutually planar and slightly twisted with respect to the acylthiourea plane. Centrosymmetric dimers generated by intermolecular Nsbnd H⋯Sdbnd C and Csbnd H⋯Sdbnd C hydrogen bonds forming R22 (8) and R21(6) motifs are present in the crystals. The interaction between APHX with benzene has been modelled and calculated using density functional theory (DFT) via Gaussian 09 software package and the preferred sites of binding are located at the acylthiourea group.

Statistical Software Engineering

DTIC Science & Technology

1998-04-13

multiversion software subject to coincident errors. IEEE Trans. Software Eng. SE-11:1511-1517. Eckhardt, D.E., A.K Caglayan, J.C. Knight, L.D. Lee, D.F...J.C. and N.G. Leveson. 1986. Experimental evaluation of the assumption of independence in multiversion software. IEEE Trans. Software

Ada (Trademark) Training Curriculum. Software Engineering Methodologies M201 Teacher’s Guide. Volume 3.

DTIC Science & Technology

1986-01-01

TRAINING CURRICULUM SOFTWARE 3/5’ENGNEERNG ETHODOLOGES 281 TEACHER’S GUIDE VOLMEU SOTC N TA A 96DA0 -3CK L(U) S F TECH INC ALTHAM MA 1986 DAAB9?-83-C...La. V)W V 0 W Wx ci >A. I- 8 0 x I- W L) 0 Z I- c 0.-ZW (n .w (x a. CLV 4 WZ0 o 0 W 1r 0 X 0 ZwI La. a) >1 0 ZU z W IA. 0 w W .... WW I 14-4D - Z 0 x...WWO= z (a~ I-- (i " c w m cal x Z w WW0.WW= woC-0ww cc Q z = lW"x w’-4ww 0 X=.-U ==L~lIl Ca- LUw w C. wow m ).i~ -4,C I -s-0. s- zwi LU -4 LU 0 LU W

Software Products - Naval Oceanography Portal

Science.gov Websites

section Advanced Search... Sections Home Time Earth Orientation Astronomy Meteorology Oceanography Ice You astronomy. Available as Fortran, C, or Python source code. Current version: 3.1 Software Products by Our computer or programmable calculator. Standards Of Fundamental Astronomy (SOFA) Libraries The International

Application of Risk Analysis Based On Remote Sensing and Geographic Information System Technologies To Control of Malaria In Nigeria

NASA Astrophysics Data System (ADS)

Njemanze, Philip; Njemanze, Philip; Peters, Constance; Uwaeziozi, Amarachukwu

More than 1 million Africans die from malaria each year. Remote sensing (RS) and geographic information system (GIS) technologies could be applied to study the risk of malaria epidemic. The patient population included 45,140 of persons aged 0-85 years seen at primary health centers in 18 different local government areas (LGAs) of Imo State. Maps of old Imo State were converted to digital form using ARC/INFO GIS software, and the resulting coverages included hydrology, towns, and villages. Remote sensing images from Advanced Very High Resolution Radiometer (AVHRR) data set were used to obtain color-coded monthly normalized-difference vegetation index or NDVI. Three groups were distinguished as: group A LGAs using water from natural hydrology and bore-holes, group B - using rain water harvesting from roof tops into surface water reservoirs, and group C - using ground surface catchment of rain water with ground ponds. These stagnant ponds were Anopheles mosquito breeding sites. The NDVI values were used to determine water availability, and were least in January/February each year, and highest in April/May. Probabilistic layer analysis (PLA) was used to determine the Odds Ratio (OR), Relative Risk (RR) and Attributable Risk (AR) for malaria in groups A, B, C. Significant risk for malaria was associated with local water conservation methods in group C, compared to A, (OR = 4.55; RR = 4.46, AR = 77.6

MK3TOOLS & NetCDF - storing VLBI data in a machine independent array oriented data format

NASA Astrophysics Data System (ADS)

Hobiger, T.; Koyama, Y.; Kondo, T.

2007-07-01

In the beginning of 2002 the International VLBI Service (IVS) has agreed to introduce a Platform-independent VLBI exchange format (PIVEX) which permits the exchange of observational data and stimulates the research across different analysis groups. Unfortunately PIVEX has never been implemented and many analysis software packages are still depending on prior processing (e.g. ambiguity resolution and computation of ionosphere corrections) done by CALC/SOLVE. Thus MK3TOOLS which handles MK3 databases without CALC/SOLVE being installed has been developed. It uses the NetCDF format to store the data and since interfaces exist for a variety of programming languages (FORTRAN, C/C++, JAVA, Perl, Python) it can be easily incorporated in existing and upcoming analysis software packages.

Evaluation of computer-generated guidelines for companions of paediatric patients undergoing chemotherapy.

PubMed

Lopes, Vagner José; Shmeil, Marcos Augusto Hochuli

2017-04-27

To compare computer-generated guidelines with and without the use of a Clinical Decision Support System - Oncology Care and Healthcare for Chemotherapy Patients, for the caregivers of children undergoing chemotherapy. This is a descriptive, evaluative, and quantitative study conducted at a paediatrics hospital in Curitiba, Paraná, Brazil, from December 2015 to January 2016. The sample consisted of 58 participants divided into two groups: Group 1, without the aid of software, and Group 2, with the aid of the software. The data were analysed using the Mann-Whitney U test. The guidelines revealed a statistical significance (p<0.05), with a prevalence of a higher concordance average in Group 2 in comparison with Group 1. Computer-generated guidelines are a valuable qualitative support tool for nurses.

Software project management tools in global software development: a systematic mapping study.

PubMed

Chadli, Saad Yasser; Idri, Ali; Ros, Joaquín Nicolás; Fernández-Alemán, José Luis; de Gea, Juan M Carrillo; Toval, Ambrosio

2016-01-01

Global software development (GSD) which is a growing trend in the software industry is characterized by a highly distributed environment. Performing software project management (SPM) in such conditions implies the need to overcome new limitations resulting from cultural, temporal and geographic separation. The aim of this research is to discover and classify the various tools mentioned in literature that provide GSD project managers with support and to identify in what way they support group interaction. A systematic mapping study has been performed by means of automatic searches in five sources. We have then synthesized the data extracted and presented the results of this study. A total of 102 tools were identified as being used in SPM activities in GSD. We have classified these tools, according to the software life cycle process on which they focus and how they support the 3C collaboration model (communication, coordination and cooperation). The majority of the tools found are standalone tools (77%). A small number of platforms (8%) also offer a set of interacting tools that cover the software development lifecycle. Results also indicate that SPM areas in GSD are not adequately supported by corresponding tools and deserve more attention from tool builders.

Ada and software management in NASA: Assessment and recommendations

NASA Technical Reports Server (NTRS)

1989-01-01

Recent NASA missions have required software systems that are larger, more complex, and more critical than NASA software systems of the past. The Ada programming language and the software methods and support environments associated with it are seen as potential breakthroughs in meeting NASA's software requirements. The findings of a study by the Ada and Software Management Assessment Working Group (ASMAWG) are presented. The study was chartered to perform three tasks: (1) assess the agency's ongoing and planned Ada activities; (2) assess the infrastructure (standards, policies, and internal organizations) supporting software management and the Ada activities; and (3) present an Ada implementation and use strategy appropriate for NASA over the next 5 years.

Effects of chitin and sepia ink hybrid sponge on the healing of burning wound rats and its impact on macrophages in vitro.

PubMed

Zhang, Wei; Wang, Yan; Sui, Xianxian; Sun, Yulin; Chen, Daohai

2016-02-01

To detect whether chitin and sepia ink sponge (CS) can promote wound healing and elevate impact of CS on phagocytosis ability of macrophages. Forty-eight rats were assigned to four groups: Normal group (Normal), negative control group (Con), chitin and sepia ink sponge group (CS) and positive control Surgicel Gauze(r) group (SG). Deep second-degree burn model was created in rats. Wound area was recorded by digital imaging and determined using Image J software. Samples were collected and kept at -80oC on 3d, 7d, 14d and 21d for cytokines detecting. Transforming growth factor (TGF)-β1, interleukin (IL)-6, matrix metalloproteinase (MMP)-1, hydroxyproline (Hyp) and macrophage activity reflected by tumor necrosis factor (TNF)-α were determined by enzyme-linked immunosorbent assay (ELISA). Comparing to Con and SG, scabs in CS group fell off and basically healed on 21 day. TGF-β1, IL-6, MMP-1 and Hyp were significantly increased by CS and SG comparing to Con (p < 0.05), CS had more apparently adjustment on TGF-β1 and MMP-1 compared to SG; results in vitro indicated CS significantly promoted phagocytosis ability of macrophages reflected in TNF-α (p < 0.05). CS improved wound healing through exerting significant influences on secretion of kinds of cytokines and activating macrophages.

Reliability and scientific use of a surgical planning software for anterior cervical discectomy and fusion (ACDF).

PubMed

Barth, Martin; Weiß, Christel; Brenke, Christopher; Schmieder, Kirsten

2017-04-01

Software-based planning of a spinal implant inheres in the promise of precision and superior results. The purpose of the study was to analyze the measurement reliability, prognostic value, and scientific use of a surgical planning software in patients receiving anterior cervical discectomy and fusion (ACDF). Lateral neutral, flexion, and extension radiographs of patients receiving tailored cages as suggested by the planning software were available for analysis. Differences of vertebral wedging angles and segmental height of all cervical segments were determined at different timepoints using intraclass correlation coefficients (ICC). Cervical lordosis (C2/C7), segmental heights, global, and segmental range of motion (ROM) were determined at different timepoints. Clinical and radiological variables were correlated 12 months after surgery. 282 radiographs of 35 patients with a mean age of 53.1 ± 12.0 years were analyzed. Measurement of segmental height was highly accurate with an ICC near to 1, but angle measurements showed low ICC values. Likewise, the ICCs of the prognosticated values were low. Postoperatively, there was a significant decrease of segmental height (p < 0.0001) and loss of C2/C7 ROM (p = 0.036). ROM of unfused segments also significantly decreased (p = 0.016). High NDI was associated with low subsidence rates. The surgical planning software showed high accuracy in the measurement of height differences and lower accuracy values with angle measurements. Both the prognosticated height and angle values were arbitrary. Global ROM, ROM of the fused and intact segments, is restricted after ACDF.

Software Design Document Vehicle Simulation CSCI (5). Volume 1. Sections 1.0 - 2.2.3.1

DTIC Science & Technology

1991-06-01

388 2.1.5.1.3.1 bbd -bit-in ........................ 388 2.1.5.1.4 bit_out.c............................ 389 2.1.5.1.4.1 bbd -bit-out...in.c........................ 391 2.1.5.1.7.1 bbd_control-in.................... 391 2.1.5.1.8 control__out.c ...................... 391 2.1.5.1.8.1 bbd ...2.1.5.1.10.1 bbd -detach........................ 392 2.1.5.1.11 init.c................................. 392 2.1.5.1.11.1 bbd -imit............................. 392

Feasibility of Modified Anterior Odontoid Screw Fixation: Analysis of a New Trajectory Using 3-Dimensional Simulation Software.

PubMed

Zhang, Li-Lian; Chen, Qi; Wang, Hao-Li; Xu, Hua-Zi; Tian, Nai-Feng

2018-05-03

Anterior odontoid screw fixation (AOSF) has been suggested as the optimal treatment for type II and some shallow type III odontoid fractures. However, only the classical surgical trajectory is available; no newer entry points or trajectories have been reported. We evaluated the anatomic feasibility of a new trajectory for AOSF using 3-dimensional (3D) screw insertion simulation software (Mimics). Computed tomography (CT) scans of patients (65 males and 59 females) with normal cervical structures were obtained consecutively, and the axes were reconstructed in 3 dimensions by Mimics software. Then simulated operations were performed using 2 new entry points below the superior articular process using bilateral screws of different diameters (group 1: 4 mm and 4 mm; group 2: 4 mm and 3.5 mm; group 3: 3.5 mm and 3.5 mm). The success rates and the required screw lengths were recorded and analyzed. The success rates were 79.03% for group 1, 95.16% for group 2, and 98.39% for group 3. The success rates for groups 2 and 3 did not differ significantly, and both were significantly better than the rate for group 1. The success rate was much higher in males than in females in group 1, but the success rate was similar in males and females in the other 2 groups. Screw lengths did not differ significantly among the 3 groups, but an effect of sex was apparent. Our modified trajectory is anatomically feasible for fixation of anterior odontoid fractures, but further anatomic experiments and clinical research are needed. Copyright © 2018 Elsevier Inc. All rights reserved.

A comparison of traditional textbook and interactive computer learning of neuromuscular block.

PubMed

Ohrn, M A; van Oostrom, J H; van Meurs, W L

1997-03-01

We designed an educational software package, RELAX, for teaching first-year anesthesiology residents about the pharmacology and clinical management of neuromuscular blockade. The software uses an interactive, problem-based approach and moves the user through cases in an operating room environment. It can be run on personal computers with Microsoft Windows (Microsoft Corp., Redmond, WA) and combines video, graphics, and text with mouse-driven user input. We utilized test scores 1) to determine whether our software was beneficial to be the educational progress of anesthesiology residents and 2) to compare computer-based learning with textbook learning. Twenty-three residents were divided into two groups matched for age and sex, and a pretest was administered to all 23 residents. There was no significant difference (P > 0.05) in the pretest scores of the two groups. Three weeks later, both groups were subjected to an educational intervention; one with our computer software and the other with selected textbooks. Both groups took a posttest immediately after the intervention. The test scores of the computer group improved significantly more (P < 0.05) than those of the textbook group. Although prior to the study the two groups showed no statistical difference in their familiarity with computers, the computer group reported much higher satisfaction with their learning experience than did the textbook group (P < 0.0001).

76 FR 54800 - International Business Machines (IBM), Software Group Business Unit, Quality Assurance Group, San...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-09-02

... Machines (IBM), Software Group Business Unit, Quality Assurance Group, San Jose, California; Notice of... workers of International Business Machines (IBM), Software Group Business Unit, Optim Data Studio Tools QA... February 2, 2011 (76 FR 5832). The subject worker group supplies acceptance testing services, design...

A new plan-scoring method using normal tissue complication probability for personalized treatment plan decisions in prostate cancer

NASA Astrophysics Data System (ADS)

Kim, Kwang Hyeon; Lee, Suk; Shim, Jang Bo; Yang, Dae Sik; Yoon, Won Sup; Park, Young Je; Kim, Chul Yong; Cao, Yuan Jie; Chang, Kyung Hwan

2018-01-01

The aim of this study was to derive a new plan-scoring index using normal tissue complication probabilities to verify different plans in the selection of personalized treatment. Plans for 12 patients treated with tomotherapy were used to compare scoring for ranking. Dosimetric and biological indexes were analyzed for the plans for a clearly distinguishable group ( n = 7) and a similar group ( n = 12), using treatment plan verification software that we developed. The quality factor ( QF) of our support software for treatment decisions was consistent with the final treatment plan for the clearly distinguishable group (average QF = 1.202, 100% match rate, n = 7) and the similar group (average QF = 1.058, 33% match rate, n = 12). Therefore, we propose a normal tissue complication probability (NTCP) based on the plan scoring index for verification of different plans for personalized treatment-plan selection. Scoring using the new QF showed a 100% match rate (average NTCP QF = 1.0420). The NTCP-based new QF scoring method was adequate for obtaining biological verification quality and organ risk saving using the treatment-planning decision-support software we developed for prostate cancer.

Erythrocyte Membrane Fatty Acid Composition in Premenopausal Patients with Iron Deficiency Anemia.

PubMed

Aktas, Mehmet; Elmastas, Mahfuz; Ozcicek, Fatih; Yilmaz, Necmettin

2016-01-01

Iron deficiency anemia (IDA) is one of the most common nutritional disorders in the world. In the present study, we evaluated erythrocyte membrane fatty acid composition in premenopausal patients with IDA. Blood samples of 102 premenopausal women and 88 healthy control subjects were collected. After the erythrocytes were separated from the blood samples, the membrane lipids were carefully extracted, and the various membrane fatty acids were measured by gas chromatography (GC). Statistical analyses were performed with the SPSS software program. We used blood ferritin concentration <15 ng/mL as cut-off for the diagnosis of IDA. The five most abundant individual fatty acids obtained were palmitic acid (16:0), oleic acid (18:1, n-9c), linoleic acid (18:2, n-6c), stearic acid (18:0), and erucic acid (C22:1, n-9c). These compounds constituted about 87% of the total membrane fatty acids in patients with IDA, and 79% of the total membrane fatty acids in the control group. Compared with control subjects, case patients had higher percentages of palmitic acid (29.9% case versus 25.3% control), oleic acid (16.8% case versus 15.1% control), and stearic acid (13.5% case versus 10.5% control), and lower percentages of erucic acid (11.5% case versus 13.6% control) and linoleic acid (15.2% case versus 15.4% control) in their erythrocyte membranes. In conclusion, the total-erythrocyte-membrane saturated fatty acid (SFA) composition in premenopausal women with IDA was found to be higher than that in the control group; however, the total-erythrocyte-membrane unsaturated fatty acid (UFA) composition in premenopausal women with IDA was found to be lower than that in the control group. The differences in these values were statistically significant.

Gamification as a tool for enhancing graduate medical education.

PubMed

Nevin, Christa R; Westfall, Andrew O; Rodriguez, J Martin; Dempsey, Donald M; Cherrington, Andrea; Roy, Brita; Patel, Mukesh; Willig, James H

2014-12-01

The last decade has seen many changes in graduate medical education training in the USA, most notably the implementation of duty hour standards for residents by the Accreditation Council of Graduate Medical Education. As educators are left to balance more limited time available between patient care and resident education, new methods to augment traditional graduate medical education are needed. To assess acceptance and use of a novel gamification-based medical knowledge software among internal medicine residents and to determine retention of information presented to participants by this medical knowledge software. We designed and developed software using principles of gamification to deliver a web-based medical knowledge competition among internal medicine residents at the University of Alabama (UA) at Birmingham and UA at Huntsville in 2012-2013. Residents participated individually and in teams. Participants accessed daily questions and tracked their online leaderboard competition scores through any internet-enabled device. We completed focus groups to assess participant acceptance and analysed software use, retention of knowledge and factors associated with loss of participants (attrition). Acceptance: In focus groups, residents (n=17) reported leaderboards were the most important motivator of participation. Use: 16 427 questions were completed: 28.8% on Saturdays/Sundays, 53.1% between 17:00 and 08:00. Retention of knowledge: 1046 paired responses (for repeated questions) were collected. Correct responses increased by 11.9% (p<0.0001) on retest. Differences per time since question introduction, trainee level and style of play were observed. Attrition: In ordinal regression analyses, completing more questions (0.80 per 10% increase; 0.70 to 0.93) decreased, while postgraduate year 3 class (4.25; 1.44 to 12.55) and non-daily play (4.51; 1.50 to 13.58) increased odds of attrition. Our software-enabled, gamification-based educational intervention was well accepted among our millennial learners. Coupling software with gamification and analysis of trainee use and engagement data can be used to develop strategies to augment learning in time-constrained educational settings. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://group.bmj.com/group/rights-licensing/permissions.

[Relationship of food groups intake and C-reactive protein in healthy adults from Mexicali, Baja California, México].

PubMed

Ruiz-Esparza, Josefina; Robinson-Navarro, Octavio; Ortega-Vélez, María Isabel; Diaz-Molina, Raúl; Carrillo-Cedillo, Eugenia Gabriela; Soria-Rodriguez, Carmen G

2013-09-01

The high sensitivity C-reactive protein (hs-CRP) is an important biomarker in inflammatory processes. The objective was to analyze the relationship between the concentrations of hs-CRP in adults from a northern Mexico region with their typical food intake patterns. A sample of 72 university professors underwent clinical and anthropometric assessments and their hs-CRP levels were quantified with an immunoenzymometric assay. Additionally, they filled out a food intake frequency questionnaire, from which the servings of different food groups were obtained with the ESHA software. The average age of participants was 49.75 +/- 10.05 years and the average hs-CRP concentration was 1.66 (0.97, 3.52) mg/L. The value of the association between fruit consumption and hs-CRP level was protective, according to the logistic regression analysis, being the Odds Ratio (OR) 0.23 (95% CI: 0.05, 1.03); while for vegetables the OR was 0.66 (95% CI: 0.12, 3.68). Furthermore, high protein content foods, dairy products, oils and fats were associated with elevated levels of hs-CRP. In conclusion, in our study, the intake of some food groups like fruits and vegetables, and to a lesser extent cereals, were associated with low values of hs-PCR.

Guidelines for Software Engineering Education Version 1.0

DTIC Science & Technology

1999-11-01

Turbo Pascal and Software Design. Sudbury, Massachusetts: Jones and Bartlett, 1997. " Deitel, Harvey M. & Deitel, Paul J. C++: How to Program . Upper...Saddle River, New Jersey: Prentice-Hall, 1997. " Deitel, Harvey M. & Deitel, Paul J. Java: How to Program . Upper Saddle River, New Jersey: Prentice-Hall

45 CFR 310.25 - What conditions apply to acquisitions of Computerized Tribal IV-D Systems?

Code of Federal Regulations, 2010 CFR

2010-10-01

... FAMILIES, DEPARTMENT OF HEALTH AND HUMAN SERVICES COMPUTERIZED TRIBAL IV-D SYSTEMS AND OFFICE AUTOMATION... Acquisition Threshold; (c) Software and ownership rights. (1) All procurement and contract instruments must... Computerized Tribal IV-D System software or enhancements thereof and all associated documentation designed...

A comparative study of effects of omega-3 Fatty acids, alpha lipoic Acid and vitamin e in type 2 diabetes mellitus.

PubMed

Udupa, A; Nahar, P; Shah, S; Kshirsagar, M; Ghongane, B

2013-07-01

Diabetes Mellitus is a metabolic disorder characterized by abnormal lipid and glucose metabolism. Various modes of adjuvant therapy have been advocated to ameliorate insulin resistance. This study was intended to assess the effects of antioxidants; alpha lipoic acid (ALA), omega 3 fatty acid and vitamin E on parameters of insulin sensitivity (blood glucose and HbA1c) in patients of type 2 diabetes mellitus with documented insulin resistance. It was a prospective, randomized, double blind, placebo controlled, single centered study. 104 patients with type 2 diabetes mellitus with insulin resistance were recruited. They were given ALA, omega 3 fatty acid, vitamin E or placebo. Fasting blood glucose and HbA1c were measured at first visit (V1) and after 90 days (V2). Statistical analysis was carried out by paired t-test by using SPSS software version 11 (SPSS, Chicago, USA). Analysis of baseline (V1) vs. end of treatment period (V2) parameters, showed significant decrease in HbA1c in the three treatment group. We also observed decrease in fasting blood glucose in the three treatment group but it was not statistically significant (Gr. I = 0.51, Gr. II = 0.05, Gr. III = 0.22, Gr. IV = 0.88). ALA, Omega 3 fatty acid and vitamin E can be used as add on therapy in patients with type 2 diabetes mellitus to improve insulin sensitivity and lipid metabolism.

Computer-Based Educational Software System. Final Report.

ERIC Educational Resources Information Center

Brandt, Richard C.; Davis, Bradley N.

CBESS (Computer-Based Educational Software System) is a set of 22 programs addressing authoring, instructional delivery, and instructional management. The programs are divided into five groups: (1) Computer-Based Memorization System (CBMS), which helps students acquire and maintain declarative (factual) knowledge (11 programs); (2) Language Skills…

75 FR 79025 - Notice Pursuant to The National Cooperative Research and Production Act of 1993-Wireless...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-12-17

... Production Act of 1993--Wireless Industrial Technology Konsortium, Inc. Notice is hereby given that, on..., 15 U.S.C. 4301 et seq. (``the Act''), Wireless Industrial Technology Konsortium, Inc. (``WITECK... circumstances. Specifically, Software Technologies Group, Westchester, IL, has withdrawn as a party to this...

DOE Office of Scientific and Technical Information (OSTI.GOV)

Oppel, III, Fred; Hart, Brian; Hart, Derek

Umbra is a software package that has been in development at Sandia National Laboratories since 1995, under the name Umbra since 1997. Umbra is a software framework written in C++ and Tcl/Tk that has been applied to many operations, primarily dealing with robotics and simulation. Umbra executables are C++ libraries orchestrated with Tcl/Tk scripts. Two major feature upgrades occurred from 4.7 to 4.8 1. System Umbra Module with its own Update Graph within the C++ framework. 2. New terrain graph for fast line-of-sight calculations All else were minor updates such as later versions of Visual Studio, OpenSceneGraph and Boost.

Configuring the Orion Guidance, Navigation, and Control Flight Software for Automated Sequencing

NASA Technical Reports Server (NTRS)

Odegard, Ryan G.; Siliwinski, Tomasz K.; King, Ellis T.; Hart, Jeremy J.

2010-01-01

The Orion Crew Exploration Vehicle is being designed with greater automation capabilities than any other crewed spacecraft in NASA s history. The Guidance, Navigation, and Control (GN&C) flight software architecture is designed to provide a flexible and evolvable framework that accommodates increasing levels of automation over time. Within the GN&C flight software, a data-driven approach is used to configure software. This approach allows data reconfiguration and updates to automated sequences without requiring recompilation of the software. Because of the great dependency of the automation and the flight software on the configuration data, the data management is a vital component of the processes for software certification, mission design, and flight operations. To enable the automated sequencing and data configuration of the GN&C subsystem on Orion, a desktop database configuration tool has been developed. The database tool allows the specification of the GN&C activity sequences, the automated transitions in the software, and the corresponding parameter reconfigurations. These aspects of the GN&C automation on Orion are all coordinated via data management, and the database tool provides the ability to test the automation capabilities during the development of the GN&C software. In addition to providing the infrastructure to manage the GN&C automation, the database tool has been designed with capabilities to import and export artifacts for simulation analysis and documentation purposes. Furthermore, the database configuration tool, currently used to manage simulation data, is envisioned to evolve into a mission planning tool for generating and testing GN&C software sequences and configurations. A key enabler of the GN&C automation design, the database tool allows both the creation and maintenance of the data artifacts, as well as serving the critical role of helping to manage, visualize, and understand the data-driven parameters both during software development and throughout the life of the Orion project.

Orion MPCV GN and C End-to-End Phasing Tests

NASA Technical Reports Server (NTRS)

Neumann, Brian C.

2013-01-01

End-to-end integration tests are critical risk reduction efforts for any complex vehicle. Phasing tests are an end-to-end integrated test that validates system directional phasing (polarity) from sensor measurement through software algorithms to end effector response. Phasing tests are typically performed on a fully integrated and assembled flight vehicle where sensors are stimulated by moving the vehicle and the effectors are observed for proper polarity. Orion Multi-Purpose Crew Vehicle (MPCV) Pad Abort 1 (PA-1) Phasing Test was conducted from inertial measurement to Launch Abort System (LAS). Orion Exploration Flight Test 1 (EFT-1) has two end-to-end phasing tests planned. The first test from inertial measurement to Crew Module (CM) reaction control system thrusters uses navigation and flight control system software algorithms to process commands. The second test from inertial measurement to CM S-Band Phased Array Antenna (PAA) uses navigation and communication system software algorithms to process commands. Future Orion flights include Ascent Abort Flight Test 2 (AA-2) and Exploration Mission 1 (EM-1). These flights will include additional or updated sensors, software algorithms and effectors. This paper will explore the implementation of end-to-end phasing tests on a flight vehicle which has many constraints, trade-offs and compromises. Orion PA-1 Phasing Test was conducted at White Sands Missile Range (WSMR) from March 4-6, 2010. This test decreased the risk of mission failure by demonstrating proper flight control system polarity. Demonstration was achieved by stimulating the primary navigation sensor, processing sensor data to commands and viewing propulsion response. PA-1 primary navigation sensor was a Space Integrated Inertial Navigation System (INS) and Global Positioning System (GPS) (SIGI) which has onboard processing, INS (3 accelerometers and 3 rate gyros) and no GPS receiver. SIGI data was processed by GN&C software into thrust magnitude and direction commands. The processing changes through three phases of powered flight: pitchover, downrange and reorientation. The primary inputs to GN&C are attitude position, attitude rates, angle of attack (AOA) and angle of sideslip (AOS). Pitch and yaw attitude and attitude rate responses were verified by using a flight spare SIGI mounted to a 2-axis rate table. AOA and AOS responses were verified by using a data recorded from SIGI movements on a robotic arm located at NASA Johnson Space Center. The data was consolidated and used in an open-loop data input to the SIGI. Propulsion was the Launch Abort System (LAS) Attitude Control Motor (ACM) which consisted of a solid motor with 8 nozzles. Each nozzle has active thrust control by varying throat area with a pintle. LAS ACM pintles are observable through optically transparent nozzle covers. SIGI movements on robot arm, SIGI rate table movements and LAS ACM pintle responses were video recorded as test artifacts for analysis and evaluation. The PA-1 Phasing Test design was determined based on test performance requirements, operational restrictions and EGSE capabilities. This development progressed during different stages. For convenience these development stages are initial, working group, tiger team, Engineering Review Team (ERT) and final.

Randomized controlled trial of clinical pharmacy management of patients with type 2 diabetes in an outpatient diabetes clinic in Jordan.

PubMed

Jarab, Anan Sadeq; Alqudah, Salam Ghazi; Mukattash, Tareq Lewis; Shattat, Ghassan; Al-Qirim, Tariq

2012-09-01

Glycemic goals (hemoglobin A1c < 7%) are often not achieved in patients with type 2 diabetes despite the availability of many effective treatments and the documented benefits of glycemic control in the reduction of long-term microvascular and macrovascular complications. Several studies have established the important positive effects of pharmacist-led management on achieving glycemic control and other clinical outcomes in patients with diabetes. Diabetes prevalence and mortality are increasing rapidly in Jordan. Nevertheless, clinical pharmacists in Jordan do not typically provide pharmaceutical care; instead, the principal responsibilities of pharmacists in Jordan are dispensing and marketing of medical products to physicians. To assess the primary clinical outcome of glycemic control (A1c) and secondary outcomes, including blood pressure, lipid values, self-reported medication adherence, and self-care activities for patients with type 2 diabetes in an outpatient diabetes clinic randomly assigned to either usual care or a pharmacist-led pharmaceutical care intervention program. Patients with type 2 diabetes attending an outpatient diabetes clinic of a large teaching hospital were recruited over a 4-month period from January through April 2011 and randomly assigned to intervention and usual care groups using the Minim software technique. The intervention group at baseline received face-to-face objective-directed education from a clinical pharmacist about type 2 diabetes, prescription medications, and necessary lifestyle changes, followed by 8 weekly telephone follow-up calls to discuss and review the prescribed treatment plan and to resolve any patient concerns. The primary outcome measure was glycemic control (A1c), and secondary measures included systolic and diastolic blood pressure, complete lipid profile (i.e., total cholesterol, low-density lipoprotein cholesterol [LDL-C], high-density lipoprotein cholesterol [HDL-C], serum triglycerides), and self-reported medication adherence (4-item Morisky Scale) and self-care activities (Summary of Diabetes Self-Care Activities questionnaire). Data were collected at baseline and at 6 months follow-up. Changes from baseline to follow-up were calculated for biomarker values, and between-group differences in the change amounts were tested using the t test for independent samples. A P value of < 0.05 was considered statistically significant. A total of 77 of 85 patients (90.6%) randomly assigned to the intervention group and 79 of 86 patients (91.9%) assigned to usual care had baseline and 6-month follow-up values. Compared with baseline values, patients in the intervention group had a mean reduction of 0.8% in A1c versus a mean increase of 0.1% from baseline in the usual care group (P = 0.019). The intervention group compared with the usual care group had small but statistically significant improvements in the secondary measures of fasting blood glucose, systolic and diastolic blood pressure, total cholesterol, LDL-C, serum triglycerides, self-reported medication adherence, and self-care activities. Between-group differences in changes in the secondary measures of HDL-C and body mass index were not significant. Patients with type 2 diabetes who received pharmacist-led pharmaceutical care in an outpatient diabetes clinic experienced reduction in A1c at 6 months compared with essentially no change in the usual care group. Six of 8 secondary biomarkers were improved in the intervention group compared with usual care. Copyright © 2012, Academy of Managed Care Pharmacy. All rights reserved.

Spectral, optical, thermal, Hirshfeld analysis and computational calculations of a new organic proton transfer crystal, 1H-benzo[d][1,2,3]triazol-3-ium-3,5-dinitrobenzoate

NASA Astrophysics Data System (ADS)

Sathya, K.; Dhamodharan, P.; Dhandapani, M.

2018-05-01

A molecular complex, 1H-benzo[d][1,2,3]triazol-3-ium-3,5-dinitrobenzoate, (BTDB), was synthesized, crystallized and characterized by CHN analysis and 1H, 13C NMR spectral studies. The crystal is transparent in entire visible region as evidenced by UV-Vis-NIR spectrum. TG/DTA analysis shows that BTDB is stable up to 150 °C. Single crystal XRD analysis was carried out to ascertain the molecular structure and BTDB crystallizes in the monoclinic system with space group P21/n. Computational studies that include optimization of molecular geometry, natural bond analysis (NBO), Mulliken population analysis and HOMO-LUMO analysis were performed using Gaussian 09 software by B3LYP method at 6-311G(d,p) level. Hirshfeld surfaces and 2D fingerprint plots revealed that O⋯H, H⋯H and O⋯C interactions are the most prevalent. The first order hyperpolarizability (β) of BITB is 44 times greater than urea. The results show that the BTDB may be used for various opto-electronic applications.

76 FR 70382 - Airworthiness Directives; General Electric Company (GE) CF6-80C2B Series Turbofan Engines

Federal Register 2010, 2011, 2012, 2013, 2014

2011-11-14

... installing software version 8.2.Q1 to the engine electronic control unit (ECU), which increases the engine's... proposed AD would require the removal of the affected ECUs from service. We are proposing this AD to... software version 8.2.Q1 to the ECU, which increases the engine's margin to flameout. That AD was prompted...

[Effect of repeated sintering and variations in thickness on the color and microstructure of dental lithium disilicate-based glass ceramic veneers].

PubMed

Cui, Huang; Jia, Yu; Shaofeng, Meng; Biyun, Gao

2017-08-01

Objective The aim of this study is to evaluate the effect of repeated sintering and variation in thickness on the color and microstructure of dental lithium disilicate-based glass ceramic veneers. Methods A total of 24 computer aided design and computer aided manufacturing (CAD/CAM) veneers was fabricated using the IPS e.max-CAD LS2 and then randomly divided into four groups (S0, S1, S2, S3; n=6). Each group was sintered 0, 1, 2, 3 times individually according to the manufacturer's recommendation. The color parameters (L, C, H, a, b values) of all the specimens were measured by a Vita easyshade dental colorimeter. The results were statistically analyzed using the SAS 9.1.3 software for MANOVA and LSD. Subsequently, the microstructures of the intersecting surfaces of the specimens were observed by scanning electron microscopy (SEM). Results After repeated sintering, the L value significantly decreased (P<0.05). For the C and b values, statistical differences were observed among the groups except between S2 and S3. SEM results showed that the interlocking microstructures of rod-shaped Li₂Si₂O₅ crystals became more compact when the number of sintering times was increased. Conclusion Repeated sintering exhibited significant influence on the color of the IPS e.max-CAD LS2 veneers.

Experimental Raman and IR spectral and theoretical studies of vibrational spectrum and molecular structure of Pantothenic acid (vitamin B5)

NASA Astrophysics Data System (ADS)

Srivastava, Mayuri; Singh, N. P.; Yadav, R. A.

2014-08-01

Vibrational spectrum of Pantothenic acid has been investigated using experimental IR and Raman spectroscopies and density functional theory methods available with the Gaussian 09 software. Vibrational assignments of the observed IR and Raman bands have been proposed in light of the results obtained from computations. In order to assign the observed IR and Raman frequencies the potential energy distributions (PEDs) have also been computed using GAR2PED software. Optimized geometrical parameters suggest that the overall symmetry of the molecule is C1. The molecule is found to possess eight conformations. Conformational analysis was carried out to obtain the most stable configuration of the molecule. In the present paper the vibrational features of the lowest energy conformer C-I have been studied. The two methyl groups have slightly distorted symmetries from C3V. The acidic Osbnd H bond is found to be the smallest one. To investigate molecular stability and bond strength we have used natural bond orbital analysis (NBO). Charge transfer occurs in the molecule have been shown by the calculated highest occupied molecular orbital-lowest unoccupied molecular orbital (HOMO-LUMO) energies. The mapping of electron density iso-surface with electrostatic potential (ESP), has been carried out to get the information about the size, shape, charge density distribution and site of chemical reactivity of the molecule.

Preliminary description of the area navigation software for a microcomputer-based Loran-C receiver

NASA Technical Reports Server (NTRS)

Oguri, F.

1983-01-01

The development of new software implementation of this software on a microcomputer (MOS 6502) to provide high quality navigation information is described. This software development provides Area/Route Navigation (RNAV) information from Time Differences (TDs) in raw form using an elliptical Earth model and a spherical model. The software is prepared for the microcomputer based Loran-C receiver. To compute navigation infomation, a (MOS 6502) microcomputer and a mathematical chip (AM 9511A) were combined with the Loran-C receiver. Final data reveals that this software does indeed provide accurate information with reasonable execution times.

Effect of ultrasound and dexpanthenol on collagen organization in tegumentary lesions.

PubMed

Guimarães, Gustavo N; Pires-De-Campos, Maria S M; Leonardi, Gislaine R; Dib-Giusti, Helena H K; Polacow, Maria L O

2011-01-01

To analyze the effect of ultrasound (US), dexpanthenol (d-P) and a combination of these treatments (US+d-P) on collagen fiber organization in tegumentary lesions in rats by birefringence analysis. Wistar rats (50) were anesthetized (Thionembutal - Sodic = 50 mg/Kg), 1 cm² of dorsal region skin was removed, and the animals were divided into five groups: control (C), gel (G), US (3 MHz, 0.1 W/cm2, 1 minute, continuous), d-P (10%) and US+d-P. After daily treatment for 7 and 14 days, 6 µm thick sections of lesioned areas were stained in picrosirius and measurements of the collagen birefringent area (µm²) were obtained using polarized light microscopy (Zeiss Axiolab-ZEISS- Germany) with histological image analysis software (KS 400 2.0 - Kontrol Eletronics, Munique, Germany). The means were compared by ANOVA followed by the Tukey test (p<0.05). The US+d-P group showed a significantly greater (p ≤ 0.001) birefringent area (1586.43±162.14) than the other experimental groups: C (139.36±35.35), US (317.55±129.9) and d-P (192.41±3657) by the 7th day of treatment, indicating acceleration of the wound healing process. By the 14th day of treatment, the US+d-P, US and d-P groups presented greater birefringence than the control group, but did not differ from each other. The combination of treatments (US+d-P) accelerated collagen fiber synthesis and organization in the early stages of cutaneous repair.

Speech Optimization at 9600 Bits/Second. Volume 2. Real-Time Software and Hardware.

DTIC Science & Technology

1980-09-30

resumed as follows: q s A r c ACCA -- S rUP > When resumed, the task closes the MAP and exits. If a complete, two MAP system is desired, the process...A r - C 2 #1 L. II V. It 1, x It -- C C cr t9-tr it 2 - 9C--99 .I. 11 1 16 f6 .~ 4 2t V V t6 M W C It It 22~ ~~ .20 2 r2-~. z-. C22 z C Z ~ 2 O s~ 9

Navy Stock Point Local Unique Computer Programs: An Analysis for Transition and Management Under the Stock Point ADP Replacement (SPAR) Project.

DTIC Science & Technology

1987-03-01

Project (SPAR). An impor- tant issue of the replacement will be the conversion of existing co uter software to allow transition from the current... issue of the replacement will be the conversion of existing computer software to allow transition from the current hardware environment to the replacement...36 G. LOCAL PROGRAM C1/C2 CONVERSION CONTRACT . . . 38 5 H. LOCAL PROGRAM COMMONALITY ISSUES ....... 41 I. SUMMARY

Conventional dual-cure versus self-adhesive resin cements in dentin bond integrity

PubMed Central

da SILVA, Renata Andreza Talaveira; COUTINHO, Margareth; CARDOZO, Pedro Igor; da SILVA, Larissa Alves; ZORZATTO, José Roberto

2011-01-01

During post preparation, the root canal is exposed to the oral cavity, and endodontic treatment may fail because of coronal leakage, bacterial infection and sealing inability of the luting cement. Objective this study quantified the interfacial continuity produced with conventional dual-cure and self-adhesive resin cements in the cervical (C), medium (M) and apical (A) thirds of the root. Material and methods Forty single-rooted human teeth were restored using Reforpost # 01 conical glass-fiber posts and different materials (N=10 per group): group AC=Adper™ ScotchBond™ Multi-purpose Plus + AllCem; group ARC=Adper™ ScotchBond™ Multi-purpose Plus + RelyX ARC; group U100=RelyX U100; and group MXC=Maxcem Elite. After being kept in 100% humidity at 37ºC for 72 hours, the samples were sectioned parallel to their longitudinal axis and positive epoxy resin replicas were made. The scanning electron micrographs of each third section of the teeth were combined using Image Analyst software and measured with AutoCAD-2002. We obtained percentage values of the interfacial continuity. Results Interfacial continuity was similar in the apical, medium and cervical thirds of the roots within the groups (Friedman test, p>0.05). Comparison of the different cements in a same root third showed that interfacial continuity was lower in MXC (C=45.5%; M=48.5%; A=47.3%) than in AC (C=85.9%, M=81.8% and A=76.0%), ARC (C=83.8%, M=82.4% and A=75.0%) and U100 (C=84.1%, M=82.4% and A=77.3%) (Kruskal-Wallis test, p<0.05). Conclusions Allcem, Rely X ARC and U100 provide the best cementation; cementation was similar among root portions; in practical terms, U100 is the best resin because it combines good cementation and easy application and none of the cements provides complete interfacial continuity. PMID:21710099

Software-based on-site estimation of fractional flow reserve using standard coronary CT angiography data.

PubMed

De Geer, Jakob; Sandstedt, Mårten; Björkholm, Anders; Alfredsson, Joakim; Janzon, Magnus; Engvall, Jan; Persson, Anders

2016-10-01

The significance of a coronary stenosis can be determined by measuring the fractional flow reserve (FFR) during invasive coronary angiography. Recently, methods have been developed which claim to be able to estimate FFR using image data from standard coronary computed tomography angiography (CCTA) exams. To evaluate the accuracy of non-invasively computed fractional flow reserve (cFFR) from CCTA. A total of 23 vessels in 21 patients who had undergone both CCTA and invasive angiography with FFR measurement were evaluated using a cFFR software prototype. The cFFR results were compared to the invasively obtained FFR values. Correlation was calculated using Spearman's rank correlation, and agreement using intraclass correlation coefficient (ICC). Sensitivity, specificity, accuracy, negative predictive value, and positive predictive value for significant stenosis (defined as both FFR ≤0.80 and FFR ≤0.75) were calculated. The mean cFFR value for the whole group was 0.81 and the corresponding mean invFFR value was 0.84. The cFFR sensitivity for significant stenosis (FFR ≤0.80/0.75) on a per-lesion basis was 0.83/0.80, specificity was 0.76/0.89, and accuracy 0.78/0.87. The positive predictive value was 0.56/0.67 and the negative predictive value was 0.93/0.94. The Spearman rank correlation coefficient was ρ = 0.77 (P < 0.001) and ICC = 0.73 (P < 0.001). This particular CCTA-based cFFR software prototype allows for a rapid, non-invasive on-site evaluation of cFFR. The results are encouraging and cFFR may in the future be of help in the triage to invasive coronary angiography. © The Foundation Acta Radiologica 2015.

Motion Imagery and Robotics Application (MIRA)

NASA Technical Reports Server (NTRS)

Martinez, Lindolfo; Rich, Thomas

2011-01-01

Objectives include: I. Prototype a camera service leveraging the CCSDS Integrated protocol stack (MIRA/SM&C/AMS/DTN): a) CCSDS MIRA Service (New). b) Spacecraft Monitor and Control (SM&C). c) Asynchronous Messaging Service (AMS). d) Delay/Disruption Tolerant Networking (DTN). II. Additional MIRA Objectives: a) Demo of Camera Control through ISS using CCSDS protocol stack (Berlin, May 2011). b) Verify that the CCSDS standards stack can provide end-to-end space camera services across ground and space environments. c) Test interoperability of various CCSDS protocol standards. d) Identify overlaps in the design and implementations of the CCSDS protocol standards. e) Identify software incompatibilities in the CCSDS stack interfaces. f) Provide redlines to the SM&C, AMS, and DTN working groups. d) Enable the CCSDS MIRA service for potential use in ISS Kibo camera commanding. e) Assist in long-term evolution of this entire group of CCSDS standards to TRL 6 or greater.

Working Group 1: Software System Design and Implementation for Environmental Modeling

EPA Science Inventory

ISCMEM Working Group One Presentation, presentation with the purpose of fostering the exchange of information about environmental modeling tools, modeling frameworks, and environmental monitoring databases.

Effects of Therapeutic Touch on Healing of the Skin in Rats.

PubMed

Thomaz de Souza, André Luiz; Carvalho Rosa, David Patrick; Blanco, Bruno Anjos; Passaglia, Patrícia; Stabile, Angelita Maria

Therapeutic touch is a complementary treatment directed toward the balance of the energy field surrounding living beings. This study's aim was to investigate the effect of therapeutic touch on wound area contraction and fibroblast proliferation in rat skin. This study was conducted using 24 male Wistar rats with dorsal wounds of diameter 8mm. The rats were divided into the following two groups: a control group: in this, the wounds were sanitized with filtered water and neutral-pH soap and a treatment group: in this, the wounds were sanitized as in the control group but the rats also underwent to daily sessions of therapeutic touch. Wound area was measured on days 1, 4, and 7 using imagelab software, version 2.4 R.C. On days 4 and 7, six animals in each group were euthanized so that the lesioned tissue could be collected for fibroblast counts and histological evaluations. On days 1 and 4, wound areas were similar in both groups. Moreover, no significant differences in fibroblast counts were observed on day 4. On day 7, however, fibroblast counts were significantly higher in the treated group than in the control group, with a subsequent wound shrinkage. These data indicate that therapeutic touch may accelerate wound repair, possibly by increasing fibroblast activity. Copyright © 2017 Elsevier Inc. All rights reserved.

Effect of silibinin on the pharmacokinetics of nitrendipine in rabbits.

PubMed

Voruganti, Swathi; Yamsani, Shravan Kumar; Yamsani, Madhusudan Rao

2014-12-01

Silibinin, a major constituent of silymarin, is widely used for its hepatoprotective effects. This study investigated the effect of silibinin on the pharmacokinetics of oral nitrendipine in rabbits. In first set of experiment, male New Zealand rabbits were pretreated with silibinin (50 mg/kg, PO) for 7 days and on last day nitrendipine (10 mg/kg, PO) was administered. In second set, both silibinin and nitrendipine were coadministered to examine acute effect of silibinin on nitrendipine pharmacokinetics. The plasma concentration of nitrendipine was estimated by high performance liquid chromatography and different pharmacokinetic parameters were calculated using WinNonlin(®) software. Coadministration of silibinin had no significant effect on pharmacokinetics of nitrendipine when compared to control group. However, a 1.89-1.57-fold increase in area under the concentration-time curve and peak plasma concentration (C max), respectively, of nitrendipine was observed in silibinin pretreated group. The mean C max was 0.034 ± 0.005 μg/mL (nitrendipine alone) and 0.054 ± 0.006 μg/mL (nitrendipine after pretreatment with silibinin). The time to reach C max, elimination rate constant and elimination half-life of nitrendipine were not significantly different among control and silibinin treated groups. This study demonstrates that silibinin increase plasma concentration of nitrendipine. Henceforth, the pharmacodynamic influence of this interaction should be taken into consideration while prescribing nitrendipine to the patients already taking silymarin.

Orbit targeting specialist function: Level C formulation requirements

NASA Technical Reports Server (NTRS)

Dupont, A.; Mcadoo, S.; Jones, H.; Jones, A. K.; Pearson, D.

1978-01-01

A definition of the level C requirements for onboard maneuver targeting software is provided. Included are revisions of the level C software requirements delineated in JSC IN 78-FM-27, Proximity Operations Software; Level C Requirements, dated May 1978. The software supports the terminal phase midcourse (TPM) maneuver, braking and close-in operations as well as supporting computation of the rendezvous corrective combination maneuver (NCC), and the terminal phase initiation (TPI). Specific formulation is contained here for the orbit targeting specialist function including the processing logic, linkage, and data base definitions for all modules. The crew interface with the software is through the keyboard and the ORBIT-TGT display.

Baricity of Bupivacaine on Maternal Hemodynamics after Spinal Anesthesia for Cesarean Section: A Randomized Controlled Trial

PubMed Central

Atashkhoei, Simin; Abedini, Naghi; Pourfathi, Hojjat; Znoz, Ali Bahrami; Marandi, Pouya Hatami

2017-01-01

Background: After spinal anesthesia, patients undergoing cesarean section are more likely to develop hemodynamic changes. The baricity of local anesthetic has an important role on spinal blockade effects. The aim of this study was to compare the isobar and hyperbaric bupivacaine 0.5% plus fentanyl on maternal hemodynamics after spinal anesthesia for C/S. Methods: In this double-blind study, 84 healthy pregnant women undergoing C/S using bupivacaine 0.5% isobar (study group, n=42) or hyperbaric (control group, n=42) for spinal anesthesia were scheduled. The study was conducted from 21 April 2014 to 21 November 2014 at Al-Zahra Hospital, Tabriz, Iran. Parameters such as maternal hemodynamics, block characteristics, side effects, and neonatal Apgar scores were recorded. Data were analyzed using the SPSS software by performing chi-square test, Fisher’s exact test, one-way ANOVA, Mann-Whitney U-test, and student’s t test. Results: The incidence of hypotension in the isobar group was lower than the hyperbaric group, although it was not statistically significant (40.47% vs. 61.9%, P=0.08). The duration of hypotension was shorter in the study group (1.6±7.8 min vs. 7.4±12.5 min, P=0.004). The dose of ephedrine was lower in the study group (2.4±6.6 mg vs. 5.3±10.7 mg, P=0.006). The main maternal side effect is sustained hypotension that was seen in 0 patients of the isobar and 7 (16.66%) of hyperbaric groups (P=0.006). None of the neonates had Apgar score≤7 at 5 min of delivery (P=1.0). Sensory and motor block duration was shorter in the study group (P=0.01). Conclusion: Isobaric bupivacaine is associated with more hemodynamic stability and shorter sensory and motor blockade in mothers under spinal anesthesia for C/S. Trial Registration Number: IRCT201401287013N7 PMID:28360439

Program Model Checking as a New Trend

NASA Technical Reports Server (NTRS)

Havelund, Klaus; Visser, Willem; Clancy, Daniel (Technical Monitor)

2002-01-01

This paper introduces a special section of STTT (International Journal on Software Tools for Technology Transfer) containing a selection of papers that were presented at the 7th International SPIN workshop, Stanford, August 30 - September 1, 2000. The workshop was named SPIN Model Checking and Software Verification, with an emphasis on model checking of programs. The paper outlines the motivation for stressing software verification, rather than only design and model verification, by presenting the work done in the Automated Software Engineering group at NASA Ames Research Center within the last 5 years. This includes work in software model checking, testing like technologies and static analysis.

2018 Ground Robotics Capabilities Conference and Exhibiton

DTIC Science & Technology

2018-04-11

Transportable Robot System (MTRS) Inc 1 Non -standard Equipment (approved) Explosive Ordnance Disposal Common Robotic System-Heavy (CRS-H) Inc 1 AROC: 3-Star...and engineering • AI risk mitigation methodologies and techniques are at best immature – E.g., V&V; Probabilistic software analytics; code level...controller to minimize potential UxS mishaps and unauthorized Command and Control (C2). • PSP-10 – Ensure that software systems which exhibit non

Effect of Unifocal versus Multifocal Lenses on Cervical Spine Posture in Patients with Presbyopia.

PubMed

Abbas, Rami L; Houri, Mohamad T; Rayyan, Mohammad M; Hamada, Hamada Ahmad; Saab, Ibtissam M

2018-04-04

There are many environmental considerations which may or may not lead to the development of faulty cervical mechanics. The design of near vision lenses could contribute to the development of such cervical dysfunction and consequently neck pain. Decision making regarding proper type of lens prescription seems important for presbyopic individuals. To investigate the effect of unifocal and multifocal lenses on cervical posture. Thirty subjects (18 females and 12 males) participated in the study with an age range from 40 to 64 years. Each subject wore consequently both unifocal and multifocal lenses randomly while reading. Then lateral cervical spine X-ray films were taken for each subject during each lens wearing. X-ray films were analyzed with digital software (Autocad software, 2 D) to measure segmental angles of the cervical vertebrae (Occiput/C1, C1/C2, C2/C3, C3/C4, C4/C5, C5/C6, C6/C7, C3/C7, C0/C3, and occiput/C7). Higher significant extension angle in the segments C0/C7, C1/C2, C5/C6, C6/C7, and C3/C7 (p<0.05) during multifocal lenses wearing were observed in contrast with higher flexion angle between C3/C4 and C4/C5 (p<0.05) with unifocal lenses wear. Multifocal lens spectacles produces increased extension in the cervical vertebrae angles when compared with the use of unifocal lenses.

Accurate analysis and visualization of cardiac (11)C-PIB uptake in amyloidosis with semiautomatic software.

PubMed

Kero, Tanja; Lindsjö, Lars; Sörensen, Jens; Lubberink, Mark

2016-08-01

(11)C-PIB PET is a promising non-invasive diagnostic tool for cardiac amyloidosis. Semiautomatic analysis of PET data is now available but it is not known how accurate these methods are for amyloid imaging. The aim of this study was to evaluate the feasibility of one semiautomatic software tool for analysis and visualization of (11)C-PIB left ventricular retention index (RI) in cardiac amyloidosis. Patients with systemic amyloidosis and cardiac involvement (n = 10) and healthy controls (n = 5) were investigated with dynamic (11)C-PIB PET. Two observers analyzed the PET studies with semiautomatic software to calculate the left ventricular RI of (11)C-PIB and to create parametric images. The mean RI at 15-25 min from the semiautomatic analysis was compared with RI based on manual analysis and showed comparable values (0.056 vs 0.054 min(-1) for amyloidosis patients and 0.024 vs 0.025 min(-1) in healthy controls; P = .78) and the correlation was excellent (r = 0.98). Inter-reader reproducibility also was excellent (intraclass correlation coefficient, ICC > 0.98). Parametric polarmaps and histograms made visual separation of amyloidosis patients and healthy controls fast and simple. Accurate semiautomatic analysis of cardiac (11)C-PIB RI in amyloidosis patients is feasible. Parametric polarmaps and histograms make visual interpretation fast and simple.

GeoTess: A generalized Earth model software utility

DOE PAGES

Ballard, Sanford; Hipp, James; Kraus, Brian; ...

2016-03-23

GeoTess is a model parameterization and software support library that manages the construction, population, storage, and interrogation of data stored in 2D and 3D Earth models. Here, the software is available in Java and C++, with a C interface to the C++ library.

Prospectus 1999

NASA Astrophysics Data System (ADS)

Holmes, Jon L.; Gettys, Nancy S.

1999-01-01

We begin 1999 with a message to all Journal subscribers about our plans for JCE Software and what you will be seeing in this column as the year progresses. Series News JCE Software will continue to publish individual programs, one to an issue as they become ready for distribution. The old Series B, C, and D designations no longer exist. Regular Issue numbers for 1999 will start with 99, and end with M for Mac OS, W for Windows, or MW for programs that will run under both the Mac OS and Windows. Windows programs will be compatible with Windows 95/98 and may or may not be compatible with Windows 3.1. Special Issues, such as CD-ROMs and videotapes will continue to be designated with SP followed by a number. Publication Plans for 1999 Periodic Table Live! Second Edition Periodic Table Live! Second Edition is a new version of one of JCE Software's most popular publications. The best features of Illustrated Periodic Table (1) for Windows and Chemistry Navigator (2) for Mac OS are combined in a new HTML-based, multimedia presentation format. Together with the video from Periodic Table Videodisc (3), digitized to take advantage of new features available in QuickTime 3 (4), the new Periodic Table Live! will be easy to use with complete features available to both Windows and Mac OS user. Chemistry Comes Alive! The Chemistry Comes Alive! (CCA!) series continues in 1999 with CD-ROMs for Mac OS and Windows. Like the first two volumes (5,6), new CDs will contain video and animations of chemical reactions, including clips from our videodiscs ChemDemos (7), ChemDemos II (8), and Titration Techniques (9). Other clips are new, available for the first time in Chemistry Comes Alive! New CCA! CDs will be made available in two varieties for individual users, one to take advantage of the high-quality video that can be displayed by new, faster computers, and another that will play well on older, slower models. In addition, a third variation for network licensing will include video optimized for delivery via the World Wide Web. If all goes according to plan, two new CCA! volumes will be announced in 1999, and CCA! 1 and CCA! 2 will be updated to take advantage of the latest digital video technology. Chem Pages Chem Pages, Laboratory Techniques, was developed by the New Traditions Curriculum Project at the University of Wisconsin-Madison. It is an HTML-based CD-ROM for Mac OS and Windows that contains lessons and tutorials to prepare introductory chemistry students to work in the laboratory. It includes text, photographs, computer graphics, animations, digital video, and voice narration to introduce students to the laboratory equipment and procedures. Regular Issues Programs that have been accepted for publication as Regular Issues in 1999 include a gas chromatography simulation for Windows 95 by Bruce Armitage, a collection of lessons on torsional rotation for organic chemistry students by Ronald Starkey, and a tutorial on pericyclic reactions, also for organic chemistry, by Albert Lee, C. T. So, and C. L. Chan. We have had many recent submissions and submissions of work in progress. In 1999 we will work with the authors and our peer-reviewers to complete and publish these submissions. Submissions include Multimedia Problems for General Chemistry by David Whisnant, lessons on point groups and crystallography by Margaret Kastner, et al., a mass spectrum simulator by Stephen W. Bigger and Robert A. Craig, a tutorial for introductory chemistry on determining the pH of very dilute acid and base solutions by Paul Mihas and George Papageorgiou, and many others. Also under development by the JCE Software staff are The General Chemistry Collection (instructor's edition) CD-ROM along with an updated student edition. An Invitation In collaboration with JCE Online we plan to make available in 1999 support files for JCE Software. These will include not only troubleshooting tips and technical support notes, but also supporting information such as lessons, specific assignments, and activities using JCE Software publications submitted by users. All JCE Software users are invited to contribute to this area. Get in touch with JCE Software and let us know how you are using our materials so that we can share your ideas with others! Although the word software is in our name, many of our publications are not traditional software. We also publish video on videotape, videodisc, and CD-ROM and electronic documents (Mathcad and Mathematica, spreadsheet files and macros, HTML documents, and PowerPoint presentations). Most chemistry instructors who use a computer in their teaching have created or considered creating one or more of these for their classes. If you have an original computer presentation, electronic document, animation, video, or any other item that is not printed text it is probably an appropriate submission for JCE Software. By publishing your work in any branch of the Journal of Chemical Education, you will share your efforts with chemistry instructors and students all over the world and get professional recognition for your achievements. Literature Cited 1. Schatz, P. F.; Moore, J. W.; Holmes, J. L. Illustrated Periodic Table; J. Chem. Educ. Software 1995, 2D2. 2. Kotz. J. C.; Young, S. Chemistry Navigator; J. Chem. Educ. Software 1995, 6C2. 3. Banks, A. Periodic Table Videodisc, 2nd ed.; J. Chem. Educ. Software 1996, SP1. 4. QuickTime 3.0, Apple Computer, Inc.: 1 Infinite Loop, Cupertino, CA 95014-2084. 5. Jacobsen, J. J.; Moore, J. W. Chemistry Comes Alive!, Volume 1; J. Chem. Educ. Software 1997, SP 18. 6. Jacobsen, J. J.; Moore, J. W. Chemistry Comes Alive!, Volume 2; Chem. Educ. Software 1998, SP 21. 7. Moore, J. W.; Jacobsen, J. J.; Hunsberger, L. R.; Gammon, S. D.; Jetzer, K. H.; Zimmerman, J. ChemDemos Videodisc; J. Chem. Educ. Software 1994, SP 8. 8. Moore, J. W.; Jacobsen, J. J.; Jetzer, K. H.; Gilbert, G.; Mattes, F.; Phillips, D.; Lisensky, G.; Zweerink, G. ChemDemos II; J. Chem. Educ. Software 1996, SP 14. 9. Jacobsen, J. J.; Jetzer, K. H.; Patani, N.; Zimmerman, J. Titration Techniques Videodisc; J. Chem. Educ. Software 1995, SP 9. JCE Software CD-ROMs In addition to more than 100 traditional computer programs and videodiscs, JCE Software has published nine CD-ROMs and four videotapes. Recently published CDs now available include:

• JCE CD 98
• Solid State Resources, 2nd Edition
• General Chemistry Collection, 2nd Edition (Student Edition)
• Chemistry Comes Alive!, Volumes 1 and 2
• Flying over Atoms

Clinical Severity Classification using Automated Conjunctival Hyperemia Analysis Software in Patients with Superior Limbic Keratoconjunctivitis.

PubMed

Kurita, Junki; Shoji, Jun; Inada, Noriko; Yoneda, Tsuyoshi; Sumi, Tamaki; Kobayashi, Masahiko; Hoshikawa, Yasuhiro; Fukushima, Atsuki; Yamagami, Satoru

2018-06-01

Digitization of clinical observation is necessary for assessing the severity of superior limbic keratoconjunctivitis (SLK). This study aimed to use a novel quantitative marker to examine hyperemia in patients with SLK. We included six eyes of six patients with both dry eye disease and SLK (SLK group) and eight eyes of eight patients with Sjögren syndrome (SS group). We simultaneously obtained the objective finding scores by using slit-lamp examination and calculated the superior hyperemia index (SHI) with an automated conjunctival hyperemia analysis software by using photographs of the anterior segment. Three objective finding scores, including papillary formation of the superior palpebral conjunctiva, superior limbal hyperemia and swelling, and superior corneal epitheliopathy, were determined. The SHI was calculated as the superior/temporal ratio of bulbar conjunctival hyperemia by using the software. Fisher's exact test was used to compare a high SHI (≥1.07) ratio between the SLK and SS groups. P-Values < 0.05 were considered statistically significant. The SHI (mean ± standard deviation) in the SLK and SS groups was 1.19 ± 0.50 and 0.69 ± 0.24, respectively. The number of patients with a high SHI (≥1.07) was significantly higher in the SLK group than in the SS group (p < 0.05). The sensitivity and specificity of the SHI in the differential diagnosis between SS and SLK were 66.7% and 87.5%, respectively. An analysis of the association between the objective finding scores and SHI showed that the SHI had a tendency to indicate the severity of superior limbal hyperemia and swelling score in the SLK group. The SHI calculated using the automated conjunctival hyperemia analysis software could successfully quantify superior bulbar conjunctival hyperemia and may be a useful tool for the differential diagnosis between SS and SLK and for the quantitative follow-up of patients with SLK.

Sensor and software use for the glycaemic management of insulin-treated type 1 and type 2 diabetes patients.

PubMed

Ajjan, Ramzi A; Abougila, Kamal; Bellary, Srikanth; Collier, Andrew; Franke, Bernd; Jude, Edward B; Rayman, Gerry; Robinson, Anthony; Singh, Baldev M

2016-05-01

Lowering glucose levels, while avoiding hypoglycaemia, can be challenging in insulin-treated patients with diabetes. We evaluated the role of ambulatory glucose profile in optimising glycaemic control in this population. Insulin-treated patients with type 1 and type 2 diabetes were recruited into a prospective, multicentre, 100-day study and randomised to control (n = 28) or intervention (n = 59) groups. The intervention group used ambulatory glucose profile, generated by continuous glucose monitoring, to assess daily glucose levels, whereas the controls relied on capillary glucose testing. Patients were reviewed at days 30 and 45 by the health care professional to adjust insulin therapy. Comparing first and last 2 weeks of the study, ambulatory glucose profile-monitored type 2 diabetes patients (n = 28) showed increased time in euglycaemia (mean ± standard deviation) by 1.4 ± 3.5 h/day (p = 0.0427) associated with reduction in HbA1c from 77 ± 15 to 67 ± 13 mmol/mol (p = 0.0002) without increased hypoglycaemia. Type 1 diabetes patients (n = 25) showed reduction in hypoglycaemia from 1.4 ± 1.7 to 0.8 ± 0.8 h/day (p = 0.0472) associated with a marginal HbA1c decrease from 75 ± 10 to 72 ± 8 mmol/mol (p = 0.0508). Largely similar findings were observed comparing intervention and control groups at end of study. In conclusion, ambulatory glucose profile helps glycaemic management in insulin-treated diabetes patients by increasing time spent in euglycaemia and decreasing HbA1c in type 2 diabetes patients, while reducing hypoglycaemia in type 1 diabetes patients. © The Author(s) 2016.

JPRS Report, Science & Technology, USSR: Computers.

DTIC Science & Technology

1988-12-08

Shlezinger, G. L. Gimelfarb ; UPRAVLYAYUSHCHIYE SISTEMY 1 MASHINY, No 6, Nov-Dec 87] 1 SOFTWARE Selected Software: Concise...0——.—Z-Z. H3 Action Examples of Condition; Examples of Action: 1. A > 0 •’ 1. A: - A + 1 2. ¥a€ B • 2. F(X, Y ) 3. Input of data 3...8217 * ( ijprffc ^h^ > , \\\\i, YN , STSi, 5TRV ,^i 5". I ). . »’"A > .’ | R f J : c - r B ; K - I ; j ’ : <ff \\K> Y *A>. 1) h’-Mfi STRVzl

Suggestive evidence for association between L-type voltage-gated calcium channel (CACNA1C) gene haplotypes and bipolar disorder in Latinos: a family-based association study

PubMed Central

Gonzalez, Suzanne; Xu, Chun; Ramirez, Mercedes; Zavala, Juan; Armas, Regina; Contreras, Salvador A; Contreras, Javier; Dassori, Albana; Leach, Robin J; Flores, Deborah; Jerez, Alvaro; Raventós, Henriette; Ontiveros, Alfonso; Nicolini, Humberto; Escamilla, Michael

2013-01-01

Objectives Through recent genome-wide association studies (GWAS), several groups have reported significant association between variants in the alpha 1C subunit of the L-type voltage-gated calcium channel (CACNA1C) and bipolar disorder (BP) in European and European-American cohorts. We performed a family-based association study to determine whether CACNA1C is associated with BP in the Latino population. Methods This study consisted of 913 individuals from 215 Latino pedigrees recruited from the United States, Mexico, Guatemala, and Costa Rica. The Illumina GoldenGate Genotyping Assay was used to genotype 58 single-nucleotide polymorphisms (SNPs) that spanned a 602.9 kb region encompassing the CACNA1C gene including two SNPs (rs7297582 and rs1006737) previously shown to associate with BP. Individual SNP and haplotype association analyses were performed using Family-Based Association Test (version 2.0.3) and Haploview (version 4.2) software. Results An eight-locus haplotype block that included these two markers showed significant association with BP (global marker permuted p = 0.0018) in the Latino population. For individual SNPs, this sample had insufficient power (10%) to detect associations with SNPs with minor effect (odds ratio = 1.15). Conclusions Although we were not able to replicate findings of association between individual CACNA1C SNPs rs7297582 and rs1006737 and BP, we were able to replicate the GWAS signal reported for CACNA1C through a haplotype analysis that encompassed these previously reported significant SNPs. These results provide additional evidence that CACNA1C is associated with BP and provides the first evidence that variations in this gene might play a role in the pathogenesis of this disorder in the Latino population. PMID:23437964

Collected Software Engineering Papers, Volume 10

NASA Technical Reports Server (NTRS)

1992-01-01

This document is a collection of selected technical papers produced by participants in the Software Engineering Laboratory (SEL) from Oct. 1991 - Nov. 1992. The purpose of the document is to make available, in one reference, some results of SEL research that originally appeared in a number of different forums. Although these papers cover several topics related to software engineering, they do not encompass the entire scope of SEL activities and interests. Additional information about the SEL and its research efforts may be obtained from the sources listed in the bibliography at the end of this document. For the convenience of this presentation, the 11 papers contained here are grouped into 5 major sections: (1) the Software Engineering Laboratory; (2) software tools studies; (3) software models studies; (4) software measurement studies; and (5) Ada technology studies.

The Blue Dog: evaluation of an interactive software program to teach young children how to interact safely with dogs.

PubMed

Schwebel, David C; Morrongiello, Barbara A; Davis, Aaron L; Stewart, Julia; Bell, Melissa

2012-04-01

Pre-post-randomized design evaluated The Blue Dog, a dog safety software program. 76 children aged 3.5-6 years completed 3 tasks to evaluate dog safety pre- and postintervention: (a) pictures (recognition of safe/risky behavior), (b) dollhouse (recall of safe behavior via simulated dollhouse scenarios), and (c) live dog (actual behavior with unfamiliar live dog). Following preintervention evaluation, children were randomly assigned to dog or fire safety conditions, each involving 3 weeks of home computer software use. Children using Blue Dog had greater change in recognition of risky dog situations than children learning fire safety. No between-group differences emerged in recall (dollhouse) or engagement (live-dog) in risky behavior. Families enjoyed using the software. Blue Dog taught children knowledge about safe engagement with dogs, but did not influence recall or implementation of safe behaviors. Dog bites represent a significant pediatric injury concern and continued development of effective interventions is needed.

Finite element analysis to compare complete denture and implant-retained overdentures with different attachment systems.

PubMed

Barão, Valentim Adelino Ricardo; Assunção, Wirley Gonçalves; Tabata, Lucas Fernando; Delben, Juliana Aparecida; Gomes, Erica Alves; de Sousa, Edson Antonio Capello; Rocha, Eduardo Passos

2009-07-01

This finite element analysis compared stress distribution on complete dentures and implant-retained overdentures with different attachment systems. Four models of edentulous mandible were constructed: group A (control), complete denture; group B, overdenture retained by 2 splinted implants with bar-clip system; group C, overdenture retained by 2 unsplinted implants with o'ring system; and group D, overdenture retained by 2 splinted implants with bar-clip and 2 distally placed o'ring system. Evaluation was performed on Ansys software, with 100-N vertical load applied on central incisive teeth. The lowest maximum general stress value (in megapascal) was observed in group A (64.305) followed by groups C (119.006), D (258.650), and B (349.873). The same trend occurred in supporting tissues with the highest stress value for cortical bone. Unsplinted implants associated with the o'ring attachment system showed the lowest maximum stress values among all overdenture groups. Furthermore, o'ring system also improved stress distribution when associated with bar-clip system.

Comparative Evaluation of the Ostium After External and Nonendoscopic Endonasal Dacryocystorhinostomy Using Image Processing (Matlabs and Image J) Softwares.

PubMed

Ganguly, Anasua; Kaza, Hrishikesh; Kapoor, Aditya; Sheth, Jenil; Ali, Mohammad Hasnat; Tripathy, Devjyoti; Rath, Suryasnata

The purpose of this study was to compare the characteristics of the ostium after external dacryocystorhinostomy and nonendoscopic endonasal dacryocystorhinostomy (NEN-DCR). This cross-sectional study included patients who underwent a successful external dacryocystorhinostomy or NEN-DCR and had ≥1 month follow up. Pictures of the ostium were captured with a nasal endoscope (4 mm, 30°) after inserting a lacrimal probe premarked at 2 mm. Image analyses were performed using Image J and Contour softwares. Of the 113 patients included, external dacryocystorhinostomy group had 53 patients and NEN-DCR group had 60 patients. The mean age of patients in the NEN-DCR group (38 years) was significantly (p < 0.05) lower than the external dacryocystorhinostomy group (50 years). There was no statistically significant difference (2 sample t test, p > 0.05) in mean follow up (6 vs. 4 months), maximum diameter of ostium (8 vs. 7 mm), perpendicular drawn to it (4 vs. 4 mm), area of ostium (43 vs. 36 mm), and the minimum distance between common internal punctum and edge of the ostium (1 vs. 1 mm) between the external and NEN-DCR groups. Image processing softwares offer simple and objective method to measure the ostium. While ostia are comparable in size, their relative position differs with posteriorly placed ostia in external compared with inferior in NEN-DCR.

MOPEX: a software package for astronomical image processing and visualization

NASA Astrophysics Data System (ADS)

Makovoz, David; Roby, Trey; Khan, Iffat; Booth, Hartley

2006-06-01

We present MOPEX - a software package for astronomical image processing and display. The package is a combination of command-line driven image processing software written in C/C++ with a Java-based GUI. The main image processing capabilities include creating mosaic images, image registration, background matching, point source extraction, as well as a number of minor image processing tasks. The combination of the image processing and display capabilities allows for much more intuitive and efficient way of performing image processing. The GUI allows for the control over the image processing and display to be closely intertwined. Parameter setting, validation, and specific processing options are entered by the user through a set of intuitive dialog boxes. Visualization feeds back into further processing by providing a prompt feedback of the processing results. The GUI also allows for further analysis by accessing and displaying data from existing image and catalog servers using a virtual observatory approach. Even though originally designed for the Spitzer Space Telescope mission, a lot of functionalities are of general usefulness and can be used for working with existing astronomical data and for new missions. The software used in the package has undergone intensive testing and benefited greatly from effective software reuse. The visualization part has been used for observation planning for both the Spitzer and Herschel Space Telescopes as part the tool Spot. The visualization capabilities of Spot have been enhanced and integrated with the image processing functionality of the command-line driven MOPEX. The image processing software is used in the Spitzer automated pipeline processing, which has been in operation for nearly 3 years. The image processing capabilities have also been tested in off-line processing by numerous astronomers at various institutions around the world. The package is multi-platform and includes automatic update capabilities. The software package has been developed by a small group of software developers and scientists at the Spitzer Science Center. It is available for distribution at the Spitzer Science Center web page.

Safety of Mixed Model Access Control in a Multilevel System

DTIC Science & Technology

2014-06-01

SOFTWARE ENGINEERING from the NAVAL POSTGRADUATE SCHOOL June 2014 Author: Randall J. Arvay Approved by: James Bret Michael Dan C . Boger...5  B.  HYPOTHESIS..................................................................................................7  C .  BACKGROUND...27  C .  USE CASE ANALYSIS .................................................................................30  1.  Use Case

Group education sessions for women veterans who experienced sexual violence: Qualitative findings.

PubMed

Dognin, Joanna; Sedlander, Erica; Jay, Melanie; Ades, Veronica

2017-09-01

The impact of sexual violence (SV) on mental health, self-care, and interpersonal relationships is profound and poses special challenges to health care delivery. Reproductive health care merits special attention because the care required may be linked to reminders of past abuse. We explored facilitators and barriers affecting the use of reproductive health services among women veterans with a history of SV. Between June and September 2015, we conducted 2 focus groups and 3 general education sessions with 27 female veterans with a history of SV at 1 medical center. We analyzed transcripts according to applied thematic analysis and used Nvivo software for data management and retrieval. Three main themes emerged from the focus groups and education sessions. (a) expressed a desire for greater agency in relation to the control they have over their bodies and medical care; (b) described how posttraumatic stress symptoms are retriggered during medical care; and (c) expressed needs for additional education, peer and provider support within the medical system. For women with a history of SV, multiple individual and systemic barriers complicate how they utilize reproductive health services. Group education sessions were an effective mode of support, information and connection to other women within the Veterans Health Administration. (PsycINFO Database Record (c) 2017 APA, all rights reserved).

IsoDesign: a software for optimizing the design of 13C-metabolic flux analysis experiments.

PubMed

Millard, Pierre; Sokol, Serguei; Letisse, Fabien; Portais, Jean-Charles

2014-01-01

The growing demand for (13) C-metabolic flux analysis ((13) C-MFA) in the field of metabolic engineering and systems biology is driving the need to rationalize expensive and time-consuming (13) C-labeling experiments. Experimental design is a key step in improving both the number of fluxes that can be calculated from a set of isotopic data and the precision of flux values. We present IsoDesign, a software that enables these parameters to be maximized by optimizing the isotopic composition of the label input. It can be applied to (13) C-MFA investigations using a broad panel of analytical tools (MS, MS/MS, (1) H NMR, (13) C NMR, etc.) individually or in combination. It includes a visualization module to intuitively select the optimal label input depending on the biological question to be addressed. Applications of IsoDesign are described, with an example of the entire (13) C-MFA workflow from the experimental design to the flux map including important practical considerations. IsoDesign makes the experimental design of (13) C-MFA experiments more accessible to a wider biological community. IsoDesign is distributed under an open source license at http://metasys.insa-toulouse.fr/software/isodes/ © 2013 Wiley Periodicals, Inc.

X-ray diffraction and infrared spectroscopy studies of Ba(Fe1/2Nb1/2)O3-(Na1/2Bi1/2)TiO3 ceramics

NASA Astrophysics Data System (ADS)

Chandra, K. P.; Yadav, Anjana; Prasad, K.

2018-05-01

Ceramics (1-x)Ba(Fe1/2Nb1/2)O3-x(Na1/2Bi1/2)TiO3; 0≤x≤1.0 were prepared by conventional ceramic synthesis technique. Rietveld refinements of X-ray diffraction data of these ceramics were carried out using FullProf software and determined their crystal symmetry, space group and unit cell dimensions. Rietveld refinement revealed that Ba(Fe1/2Nb1/2)O3 has cubic structure with space group Pm 3 ¯ m and Na1/2Bi1/2)TiO3 has rhombohedral structure with space group R3c. Addition of (Na1/2Bi1/2)TiO3 to Ba(Fe1/2Nb1/2)O3 resulted in the change of unit cell structure from cubic to tetragonal (P4/mmm) for x = 0.75 and the X-Ray diffraction peaks slightly shift towards higher Bragg's angle, suggesting slight decrease in unit cell volume. SEM studies were carried out in order to access the quality of the prepared ceramics which showed a change in grain shapes with the increase of (Na1/2Bi1/2)TiO3 content. FTIR spectra confirmed the formation of perovskite type solid solutions.

A Microcomputer-Based Software Package for Eye-Monitoring Research. Technical Report No. 434.

ERIC Educational Resources Information Center

McConkie, George W.; And Others

A software package is described that collects and reduces eye behavior data (eye position and pupil size) using an IBM-PC compatible computer. Written in C language for speed and portability, it includes several features: (1) data can be simultaneously collected from other sources (such as electroencephalography and electromyography); (2)…

Understanding the Adoption of Ada: Results of an Industry Survey

DTIC Science & Technology

1990-05-01

the next event. Arrival of the data and occurrence of events is not under the control of the software. 7% Online software must respond within human...Better than Average 1 2 3 4 5 6 7 D/K N/A SEI-90-SR-10 47 ,L Section C. CompetItors and the Maret for (APPLICATION AREA

3D-Image analysis of the impact of toothpaste abrasivity on the progression of simulated non-carious cervical lesions.

PubMed

Sabrah, Alaa H; Turssi, Cecilia P; Lippert, Frank; Eckert, George J; Kelly, Adam B; Hara, Anderson T

2018-06-01

To investigate the effect of toothpaste abrasive level on the progression of non-carious cervical lesions (NCCLs) using 3D-image subtraction. Upper first premolars were allocated into seven groups (n = 16) of toothpaste/abrasive slurries: A-Zeodent113/5%, B-Zeodent124/10%, C-Zeodent103/15%, D-Sensodyne Pronamel, E-Crest Cavity-Protection, F-Crest Pro-Health-Whitening, and G-Deionized water (DIW). Teeth were mounted on acrylic blocks, and their root surfaces covered with acrylic resin, except for 2-mm near the cemento-enamel junction that was exposed to toothbrushing. Specimens were brushed with the slurries for 5000-, 15,000-, 35,000- and 65,000-strokes. Impressions were taken at baseline and after each brushing time, and then scanned by a 3D optical profilometer. Dentine volume loss was calculated by image subtraction software and subjected to mixed-model ANOVA and multiple comparison tests (α = 0.05). No significant differences among slurries were observed at 5000 and 15,000. At 35,000, F showed higher loss than all other groups except C, which did not differ from the others. At 65,000, F (4.19 ± 3.29 mm 3 ) showed the highest loss, followed by C (2.33 ± 1.47 mm 3 ), which differed from all the other groups except B (1.85 ± 0.91 mm 3 ). Groups B, A (1.35 ± 0.65 mm 3 ), D (1.17 ± 0.48 mm 3 ), E (1.40 ± 0.68 mm 3 ) and G (1.12 ± 0.73 mm 3 ) did not differ from each other. Groups F and C showed significant increase of volume loss starting at 35,000, while B, A, D and E only at 65,000; no increase loss was observed for G. 3D-image subtraction was able to quantify and differentiate tooth loss, but only at advanced stages. The progression of NCCLs was more evident and faster for highly abrasive slurries. Upon root dentin exposure, brushing with lower abrasive dentifrices is advisable to reduce the risk for NCCLs development. Copyright © 2018 Elsevier Ltd. All rights reserved.

Digital volumetric measurement of mammographic density and the risk of overlooking cancer in Japanese women.

PubMed

Sawada, Terumasa; Akashi, Sadako; Nakamura, Seigo; Kuwayama, Takashi; Enokido, Katsutoshi; Yoshida, Miwa; Hashimoto, Rikako; Ide, Toshimi; Masuda, Hiroko; Taruno, Kanae; Oyama, Hiroto; Takamaru, Tomoko; Kanada, Yoko; Ikeda, Murasaki; Kosugi, Natsuko; Sato, Hiroki; Nakayama, Sayuka; Ata, Arisa; Tonouchi, Yumi; Sakai, Haruna; Matsunaga, Yuki; Matsutani, Akiko

2017-09-01

Breast density often affects cancer detection via mammography (MMG). Because of this, additional tests are recommended for women with dense breasts. This study aimed to reveal trends in breast density among Japanese women and determine whether differences in breast density differentially affected the detection of abnormalities via MMG. We retrospectively analyzed 397 control women who underwent MMG screening as well as 269 patients who underwent surgery for breast cancer for whom preoperative MMG data were available. VolparaDensity™ (Volpara), a three-dimensional image analysis software with high reproducibility, was used to calculate breast density. Breasts were categorized according to the volumetric density grade (VDG), a measure of the percentage of dense tissue. The associations between age, VDG, and MMG density categories were analyzed. In the control group, 78% of women had dense breasts, while in the breast cancer group, 87% of patients had dense breasts. One of 36 patients with non-dense breasts (2.7%) was classified as category 1 or 2 (C-1 or C-2), indicating that abnormal findings could not be detected by MMG. The proportion of patients with breast cancer who had dense breasts and were classified as C-1 or C-2 was as high as 22.3%. The proportions of Japanese women with dense breasts were high. In addition, the false-negative rate for women with dense breasts was also high. Owing to this, Japanese women with dense breasts may need to commonly undergo additional tests to ensure detection of breast cancer in the screening MMG.

Cost Effectiveness Trade-Offs in Software Support Environment Standardization.

DTIC Science & Technology

1986-09-30

IIIIIEEEIIIIIE MiII I U..2 2 ma MICROCOPY RESOLUTION TEST CHART 911C FILE C y, o FINAL REPORT - September 30, 1986 G- TECHNION INTERNATIONAL, INC. Cost...Summary description of econometric model B-I C. Causal chain used as basis for model C-I D. Excerpts from [Wer185) D-1 LIST OF FIGURES S-1 USAF MCCR...Productivity cost drivers D-4 LIST OF TASL3$ I-1 Summary of Tangible Benefits in Econometric Equations 1-9 1-2 Summary of Tangible Costs in Econometric

DTkid: Interactive Simulation Software for Training Tutors of Children with Autism

ERIC Educational Resources Information Center

Randell, Tom; Hall, Martin; Bizo, Lewis; Remington, Bob

2007-01-01

Discrete-trial training (DTT) relies critically on implementation by trained tutors. We report three experiments carried out in the development of "DTkid"--interactive computer simulation software that presents "SIMon", a realistic virtual child with whom novice tutors can learn and practise DTT techniques. Experiments 1 and 2 exposed groups of…

Guidance and Control Software Project Data - Volume 1: Planning Documents

NASA Technical Reports Server (NTRS)

Hayhurst, Kelly J. (Editor)

2008-01-01

The Guidance and Control Software (GCS) project was the last in a series of software reliability studies conducted at Langley Research Center between 1977 and 1994. The technical results of the GCS project were recorded after the experiment was completed. Some of the support documentation produced as part of the experiment, however, is serving an unexpected role far beyond its original project context. Some of the software used as part of the GCS project was developed to conform to the RTCA/DO-178B software standard, "Software Considerations in Airborne Systems and Equipment Certification," used in the civil aviation industry. That standard requires extensive documentation throughout the software development life cycle, including plans, software requirements, design and source code, verification cases and results, and configuration management and quality control data. The project documentation that includes this information is open for public scrutiny without the legal or safety implications associated with comparable data from an avionics manufacturer. This public availability has afforded an opportunity to use the GCS project documents for DO-178B training. This report provides a brief overview of the GCS project, describes the 4-volume set of documents and the role they are playing in training, and includes the planning documents from the GCS project. Volume 1 contains five appendices: A. Plan for Software Aspects of Certification for the Guidance and Control Software Project; B. Software Development Standards for the Guidance and Control Software Project; C. Software Verification Plan for the Guidance and Control Software Project; D. Software Configuration Management Plan for the Guidance and Control Software Project; and E. Software Quality Assurance Activities.

Interim Update to the AN/UPX-41(C) Spectrum Certification Conditions (SPS-18778/1).

DOT National Transportation Integrated Search

2015-11-01

In 2012, the Navy requested spectrum certification for the shipboard AN/UPX-41(C) Digital Interrogator System, Software Version 5.5 with Mode 5. Current operating conditions for the Navys AN/UPX-41(C) are the same as restrictions imposed on the AN...

Ice crystals classification using airborne measurements in mixing phase

NASA Astrophysics Data System (ADS)

Sorin Vajaiac, Nicolae; Boscornea, Andreea

2017-04-01

This paper presents a case study of ice crystals classification from airborne measurements in mixed-phase clouds. Ice crystal shadow is recorded with CIP (Cloud Imaging Probe) component of CAPS (Cloud, Aerosol, and Precipitation Spectrometer) system. The analyzed flight was performed in the south-western part of Romania (between Pietrosani, Ramnicu Valcea, Craiova and Targu Jiu), with a Beechcraft C90 GTX which was specially equipped with a CAPS system. The temperature, during the fly, reached the lowest value at -35 °C. These low temperatures allow the formation of ice crystals and influence their form. For the here presented ice crystals classification a special software, OASIS (Optical Array Shadow Imaging Software), developed by DMT (Droplet Measurement Technologies), was used. The obtained results, as expected are influenced by the atmospheric and microphysical parameters. The particles recorded where classified in four groups: edge, irregular, round and small.

Towards understanding software: 15 years in the SEL

NASA Technical Reports Server (NTRS)

Mcgarry, Frank; Pajerski, Rose

1990-01-01

For 15 years, the Software Engineering Laboratory (SEL) at GSFC has been carrying out studies and experiments for the purpose of understanding, assessing, and improving software, and software processes within a production software environment. The SEL comprises three major organizations: (1) the GSFC Flight Dynamics Division; (2) the University of Maryland Computer Science Department; and (3) the Computer Sciences Corporation Flight Dynamics Technology Group. These organizations have jointly carried out several hundred software studies, producing hundreds of reports, papers, and documents: all describing some aspect of the software engineering technology that has undergone analysis in the flight dynamics environment. The studies range from small controlled experiments (such as analyzing the effectiveness of code reading versus functional testing) to large, multiple-project studies (such as assessing the impacts of Ada on a production environment). The key findings that NASA feels have laid the foundation for ongoing and future software development and research activities are summarized.

Collected software engineering papers, volume 7

NASA Technical Reports Server (NTRS)

1989-01-01

A collection is presented of selected technical papers produced by participants in the Software Engineering Laboratory (SEL) during the period Dec. 1988 to Oct. 1989. The purpose of the document is to make available, in one reference, some results of SEL research that originally appeared in a number of different forums. For the convenience of this presentation, the seven papers contained here are grouped into three major categories: (1) Software Measurement and Technology Studies; (2) Measurement Environment Studies; and (3) Ada Technology Studies. The first category presents experimental research and evaluation of software measurement and technology; the second presents studies on software environments pertaining to measurement. The last category represents Ada technology and includes research, development, and measurement studies.

Effect of calcium citrate on bone integration in a rabbit femur defect model.

PubMed

Zhang, Wei; Wang, Wei; Chen, Qing-Yu; Lin, Zhong-Qin; Cheng, Shao-Wen; Kou, Dong-Quan; Ying, Xiao-Zhou; Shen, Yue; Cheng, Xiao-Jie; Nie, Peng-Fei; Li, Xiu-Cui; Rompis, Ferdinand An; Huang, Hang; Zhang, Hua; Mu, Zhong-Lin; Peng, Lei

2012-04-01

To explore effect of calcium citrate on bone integration in a rabbit femur defect model, and to compare the bone formation with different sizes by radiological and histological study. Twenty-four male Japanese white rabbits were randomly divided into three groups (Group A, B, C) in this study. Under anesthesia, defects of four sizes (1.2, 1.5, 2.0 and 2.5 mm) were created in each of the rabbits. Commercially pure calcium citrate powder was placed inside the medullary compartment of the femur (Experimental), while in the contralateral femur (Control) nothing was implanted. The defects were analyzed using radiography and histological analysis by using Imagepro-Plus 6.0 software after animal was sacrificed at 4th(Group A), 6th(Group B) and 8th(Group C) weeks postoperatively. Four samples were analyzed for each size of defect and each healing period. The histological and the radiologic evaluation were performed after sacrification of all rabbits on postoperative 4th and 6th weeks, It showed significant difference between the experimental group and the control group when these defects were less than or equal to 2.0 mm. No statistical difference was observed when these defects were larger than 2.0 mm at all healing periods except at the 4th week. Calcium citrate affects the early periods of bone defects healing mechanism in Japanese white rabbits positively, especially when the defect is not too large. We suggest further studies on calcium citrate to determine the effects of various dosages, administration ways and the experimental time on the bone defects. Copyright © 2012 Hainan Medical College. Published by Elsevier B.V. All rights reserved.

75 FR 5146 - Hewlett Packard Company Business Critical Systems, Mission Critical Business Software Division...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-02-01

... Packard Company Business Critical Systems, Mission Critical Business Software Division, OpenVMS Operating... Software Division, OpenVMS Operating System Development Group, Including an Employee Operating Out of the..., Mission Critical Business Software Division, OpenVMS Operating System Development Group, including...

Remote monitoring of videourodynamics using smart phone and free instant messaging software.

PubMed

Hsieh, Po-Fan; Chang, Chao-Hsiang; Lien, Chi-Shun; Wu, Hsi-Chin; Hsiao, Po-Jen; Chou, Eric Chieh-Lung

2013-11-01

To evaluate the feasibility of using smart phones plus free instant messaging software for remote monitoring of videourodynamics. From November 2011 to October 2012, 85 females with voiding disorders were enrolled for videourodynamic tests. The patients were assigned to videourodynamics remotely monitored by the attending physician by using iPhone/iPad and Skype (group 1) and videourodynamics with the attending physician present (group 2). The procedural time and videourodynamic qualities, assessed by the frequency of adherence to the modified Sullivan criteria, in each group were recorded and compared. There were 44 and 41 patients in group 1 and group 2, respectively. The mean procedural time was comparable between group 1 and group 2 (56.3 vs. 54.4 min, P = 0.25). The frequencies of adherence to the modified Sullivan criteria were similar in each group. The qualities of videourodynamics under the attending physician's remote or direct monitoring were both appropriate. Based on the convenience of Internet, the popularity of smart phones and the intention to make the urologists use their time more efficiently, our study provides remote monitoring as an alternative way for performing videourodynamics. © 2013 Wiley Periodicals, Inc.

The evolution of CMS software performance studies

NASA Astrophysics Data System (ADS)

Kortelainen, M. J.; Elmer, P.; Eulisse, G.; Innocente, V.; Jones, C. D.; Tuura, L.

2011-12-01

CMS has had an ongoing and dedicated effort to optimize software performance for several years. Initially this effort focused primarily on the cleanup of many issues coming from basic C++ errors, namely reducing dynamic memory churn, unnecessary copies/temporaries and tools to routinely monitor these things. Over the past 1.5 years, however, the transition to 64bit, newer versions of the gcc compiler, newer tools and the enabling of techniques like vectorization have made possible more sophisticated improvements to the software performance. This presentation will cover this evolution and describe the current avenues being pursued for software performance, as well as the corresponding gains.

[Influence of the root canal instrumentation size on the disinfection of intracanal microbe by Er:YAG laser].

PubMed

Xu, Xue-song; Zhu, Ya-qin

2015-12-01

To evaluate the influence of different root canal instrumentation size on disinfection of intracanal microbe of dental root canal. 368 extracted human anterior teeth with single straight root were randomly divided into 8 groups of 46 roots in each. They were instrumented with K3 Ni-Ti files as follows: group A1 and group B1(#25/0.06), group A2 and group B2(#30/0.06), group A3 and group B3(#35/0.06), group A4 and group B4(#40/0.06). After being prepared and sterilized by autoclaving, group A was inoculated with Enterococcus faecalis, and group B was inoculated with Candida albicans. All groups were irrigated with Er:YAG laser combination of 3% NaOCl, 17% EDTA and 0.9% saline, and then the numbers of microbe on the surface of root canal walls were counted after the treatment, the absolute reduction of counting colony forming units(CFUs) and the relative residual rate of CFUs in the individual group was determined. The Date was analyzed with GraphPad Prism 5.02 software package by one-way analysis of variance. Levels of disinfection on E.faecalis and C.albicans increased when root canals were enlarged; #40/0.06 showed the best disinfection, #35/0.06 showed a significantly better disinfection than #30/0.06 and #25/0.06. Substantial reduction of microbe was obtained in #35/0.06 and #40/0.06 compared with #25/0.06 and #30/0.06(P<0.05). Within the root canal size of #25/0.06-#40/0.06, under the conditions of Er:YAG laser combination of 3% NaOCl, 17% EDTA and 0.9% saline, it was concluded that the reduction of E.faecalis and C.albicans of the anterior straight root canals could be predicted by increasing the root canal instrumentation size large than #30/0.06.

Software Engineering Research/Developer Collaborations in 2004 (C104)

NASA Technical Reports Server (NTRS)

Pressburger, Tom; Markosian, Lawrance

2005-01-01

In 2004, six collaborations between software engineering technology providers and NASA software development personnel deployed a total of five software engineering technologies (for references, see Section 7.2) on the NASA projects. The main purposes were to benefit the projects, infuse the technologies if beneficial into NASA, and give feedback to the technology providers to improve the technologies. Each collaboration project produced a final report (for references, see Section 7.1). Section 2 of this report summarizes each project, drawing from the final reports and communications with the software developers and technology providers. Section 3 indicates paths to further infusion of the technologies into NASA practice. Section 4 summarizes some technology transfer lessons learned. Section 6 lists the acronyms used in this report.

Robust Ambiguity Estimation for an Automated Analysis of the Intensive Sessions

NASA Astrophysics Data System (ADS)

Kareinen, Niko; Hobiger, Thomas; Haas, Rüdiger

2016-12-01

Very Long Baseline Interferometry (VLBI) is a unique space-geodetic technique that can directly determine the Earth's phase of rotation, namely UT1. The daily estimates of the difference between UT1 and Coordinated Universal Time (UTC) are computed from one-hour long VLBI Intensive sessions. These sessions are essential for providing timely UT1 estimates for satellite navigation systems. To produce timely UT1 estimates, efforts have been made to completely automate the analysis of VLBI Intensive sessions. This requires automated processing of X- and S-band group delays. These data often contain an unknown number of integer ambiguities in the observed group delays. In an automated analysis with the c5++ software the standard approach in resolving the ambiguities is to perform a simplified parameter estimation using a least-squares adjustment (L2-norm minimization). We implement the robust L1-norm with an alternative estimation method in c5++. The implemented method is used to automatically estimate the ambiguities in VLBI Intensive sessions for the Kokee-Wettzell baseline. The results are compared to an analysis setup where the ambiguity estimation is computed using the L2-norm. Additionally, we investigate three alternative weighting strategies for the ambiguity estimation. The results show that in automated analysis the L1-norm resolves ambiguities better than the L2-norm. The use of the L1-norm leads to a significantly higher number of good quality UT1-UTC estimates with each of the three weighting strategies.

Collected software engineering papers, volume 8

NASA Technical Reports Server (NTRS)

1990-01-01

A collection of selected technical papers produced by participants in the Software Engineering Laboratory (SEL) during the period November 1989 through October 1990 is presented. The purpose of the document is to make available, in one reference, some results of SEL research that originally appeared in a number of different forums. Although these papers cover several topics related to software engineering, they do not encompass the entire scope of SEL activities and interests. Additional information about the SEL and its research efforts may be obtained from the sources listed in the bibliography. The seven presented papers are grouped into four major categories: (1) experimental research and evaluation of software measurement; (2) studies on models for software reuse; (3) a software tool evaluation; and (4) Ada technology and studies in the areas of reuse and specification.

Dynamic Modelling with "MLE-Energy Dynamic" for Primary School

NASA Astrophysics Data System (ADS)

Giliberti, Enrico; Corni, Federico

During the recent years simulation and modelling are growing instances in science education. In primary school, however, the main use of software is the simulation, due to the lack of modelling software tools specially designed to fit/accomplish the needs of primary education. In particular primary school teachers need to use simulation in a framework that is both consistent and simple enough to be understandable by children [2]. One of the possible area to approach modelling is about the construction of the concept of energy, in particular for what concerns the relations among substance, potential, power [3]. Following the previous initial research results with this approach [2], and with the static version of the software MLE Energy [1], we suggest the design and the experimentation of a dynamic modelling software—MLE dynamic-capable to represent dynamically the relations occurring when two substance-like quantities exchange energy, modifying their potential. By means of this software the user can graphically choose the dependent and independent variables and leave the other parameters fixed. The software has been initially evaluated, during a course of science education with a group of primary school teachers-to-be, to test the ability of the software to improve teachers' way of thinking in terms of substance-like quantities and their effects (graphical representation of the extensive, intensive variables and their mutual relations); moreover, the software has been tested with a group of primary school teachers, asking their opinion about the software didactical relevance in the class work.

Application of Experimental and Quasi-Experimental Research Designs to Educational Software Evaluation.

ERIC Educational Resources Information Center

Muller, Eugene W.

1985-01-01

Develops generalizations for empirical evaluation of software based upon suitability of several research designs--pretest posttest control group, single-group pretest posttest, nonequivalent control group, time series, and regression discontinuity--to type of software being evaluated, and on circumstances under which evaluation is conducted. (MBR)

[Genome-wide identification and expression analysis of the WRKY gene family in peach].

PubMed

Gu, Yan-bing; Ji, Zhi-rui; Chi, Fu-mei; Qiao, Zhuang; Xu, Cheng-nan; Zhang, Jun-xiang; Zhou, Zong-shan; Dong, Qing-long

2016-03-01

The WRKY transcription factors are one of the largest families of transcriptional regulators and play diverse regulatory roles in biotic and abiotic stresses, plant growth and development processes. In this study, the WRKY DNA-binding domain (Pfam Database number: PF03106) downloaded from Pfam protein families database was exploited to identify WRKY genes from the peach (Prunus persica 'Lovell') genome using HMMER 3.0. The obtained amino acid sequences were analyzed with DNAMAN 5.0, WebLogo 3, MEGA 5.1, MapInspect and MEME bioinformatics softwares. Totally 61 peach WRKY genes were found in the peach genome. Our phylogenetic analysis revealed that peach WRKY genes were classified into three Groups: Ⅰ, Ⅱ and Ⅲ. The WRKY N-terminal and C-terminal domains of Group Ⅰ (group I-N and group I-C) were monophyletic. The Group Ⅱ was sub-divided into five distinct clades (groupⅡ-a, Ⅱ-b, Ⅱ-c, Ⅱ-d and Ⅱ-e). Our domain analysis indicated that the WRKY regions contained a highly conserved heptapeptide stretch WRKYGQK at its N-terminus followed by a zinc-finger motif. The chromosome mapping analysis showed that peach WRKY genes were distributed with different densities over 8 chromosomes. The intron-exon structure analysis revealed that structures of the WRKY gene were highly conserved in the peach. The conserved motif analysis showed that the conserved motifs 1, 2 and 3, which specify the WRKY domain, were observed in all peach WRKY proteins, motif 5 as the unknown domain was observed in group Ⅱ-d, two WRKY domains were assigned to GroupⅠ. SqRT-PCR and qRT-PCR results indicated that 16 PpWRKY genes were expressed in roots, stems, leaves, flowers and fruits at various expression levels. Our analysis thus identified the PpWRKY gene families, and future functional studies are needed to reveal its specific roles.

Defense AT and L. Volume 42, Number 1

DTIC Science & Technology

2013-02-01

Agnish The U.S. Army late last year began equipping brigade combat teams with its first package of radios, satellite systems, software applications...Army’s first package of radios, satellite systems, software applications, smartphone-like devices, and other network components that provide integrated... satellite communications, intelligence, mission command applications, and the integration of C4ISR equip- ment onto various vehicle platforms. This

The effect of working time on the displacement of Biodentine™ beneath prefabricated stainless steel crown: a laboratory study.

PubMed

Dawood, Alaa E; Manton, David J; Parashos, Peter; Wong, Rebecca H K

2016-11-01

To investigate the displacement of Biodentine ™ following cementation of stainless steel crowns (SSC) with glass-ionomer cement (GIC) on plastic deciduous teeth prepared for pulpotomy. Twenty plastic teeth with prepared occlusal cavities were divided into four groups and had Biodentine ™ placed as a mock pulpotomy agent. The pulp chamber was filled with freshly mixed Biodentine ™ then a GIC-loaded SSC was seated on the tooth using a standardized seating force for periods of: 1 min (Group 1); 2 min (Group 2), 3 min (Group 3) and 6 min (Group 4) after mixing. After 24 h at 37°C and 90% humidity, the crowns were sectioned mesio-distally and standardized digital photographs taken. Image analysis software was used to determine the ratio of the surface area of displaced Biodentine ™ relative to the surface area of the pulp chamber. The thinnest section of the remaining Biodentine ™ was measured. The lowest values of Biodentine ™ displacement and the highest values of remaining Biodentine ™ thickness were associated with Group 4. There were no significant differences between the results in Group 3 and Group 4. Within the limitations of this in vitro study, a GIC-loaded SSC can be seated on Biodentine ™ placed into a pulp chamber 3 min after mixing. © 2015 Wiley Publishing Asia Pty Ltd.

Comparison of Perfusion CT Software to Predict the Final Infarct Volume After Thrombectomy.

PubMed

Austein, Friederike; Riedel, Christian; Kerby, Tina; Meyne, Johannes; Binder, Andreas; Lindner, Thomas; Huhndorf, Monika; Wodarg, Fritz; Jansen, Olav

2016-09-01

Computed tomographic perfusion represents an interesting physiological imaging modality to select patients for reperfusion therapy in acute ischemic stroke. The purpose of our study was to determine the accuracy of different commercial perfusion CT software packages (Philips (A), Siemens (B), and RAPID (C)) to predict the final infarct volume (FIV) after mechanical thrombectomy. Single-institutional computed tomographic perfusion data from 147 mechanically recanalized acute ischemic stroke patients were postprocessed. Ischemic core and FIV were compared about thrombolysis in cerebral infarction (TICI) score and time interval to reperfusion. FIV was measured at follow-up imaging between days 1 and 8 after stroke. In 118 successfully recanalized patients (TICI 2b/3), a moderately to strongly positive correlation was observed between ischemic core and FIV. The highest accuracy and best correlation are shown in early and fully recanalized patients (Pearson r for A=0.42, B=0.64, and C=0.83; P<0.001). Bland-Altman plots and boxplots demonstrate smaller ranges in package C than in A and B. Significant differences were found between the packages about over- and underestimation of the ischemic core. Package A, compared with B and C, estimated more than twice as many patients with a malignant stroke profile (P<0.001). Package C best predicted hypoperfusion volume in nonsuccessfully recanalized patients. Our study demonstrates best accuracy and approximation between the results of a fully automated software (RAPID) and FIV, especially in early and fully recanalized patients. Furthermore, this software package overestimated the FIV to a significantly lower degree and estimated a malignant mismatch profile less often than other software. © 2016 American Heart Association, Inc.

Databank Software for the 1990s and Beyond--Part 1: The User's Wish List.

ERIC Educational Resources Information Center

Basch, Reva

1990-01-01

Describes desired software enhancements identified by the Southern California Online Users Group in the areas of search language, database selection, document retrieval and display, user interface, customer support, and cost and economic issues. The need to prioritize these wishes and to determine whether features should reside in the mainframe or…

Cleanroom Software Engineering Reference Model. Version 1.0.

DTIC Science & Technology

1996-11-01

teams. It also serves as a baseline for continued evolution of Cleanroom practice. The scope of the CRM is software management , specification...addition to project staff, participants include management , peer organization representatives, and customer representatives as appropriate for...2 Review the status of the process with management , the project team, peer groups, and the customer . These verification activities include

Common Database Interface for Heterogeneous Software Engineering Tools.

DTIC Science & Technology

1987-12-01

SUB-GROUP Database Management Systems ;Programming(Comuters); 1e 05 Computer Files;Information Transfer;Interfaces; 19. ABSTRACT (Continue on reverse...Air Force Institute of Technology Air University In Partial Fulfillment of the Requirements for the Degree of Master of Science in Information Systems ...Literature ..... 8 System 690 Configuration ......... 8 Database Functionis ............ 14 Software Engineering Environments ... 14 Data Manager

Infrared thermography of the udder surface of dairy cattle: characteristics, methods, and correlation with rectal temperature.

PubMed

Metzner, Moritz; Sauter-Louis, Carola; Seemueller, Andrea; Petzl, Wolfram; Klee, Wolfgang

2014-01-01

Thermograms of the caudal udder surface were taken of five healthy cows before and after inoculation of Escherichia coli into the right hind quarter. Images in clinically normal udder quarters from cows without fever (CN) were compared with those post inoculation when cows had fever (⩾ 39.5°C) and showed elevation of somatic cell counts (⩾ 400,000 cells/mL) in the inoculated quarter (CM). Using graphic software tools, different geometric analysis tools (GATs: polygons, rectangles, lines) were set within the thermographic images. The following descriptive parameters (DPs) were employed: minimum value ('min'), maximum value ('max'), range ('max-min'), and arithmetic mean ('am'). Surface temperatures in group CN were between 34.1°C ('polygons'/'min') and 37.9°C ('polygons'/'max'), and in group CM between 34.5°C ('polygons'/'min') and 40.0°C ('polygons'/'max'). The greatest differences in the temperatures between CN and CM (2.06°C) were found in 'polygons' and 'rectangles' using 'max'. The smallest coefficient of variation in triplicate determinations was found in GAT 'polygons' with DP 'max' (Tmax) (0.15%), and the relationship to the rectal body temperature (Tr) could be described by Tr=5.68+0.874*Tmax. The results show that significant changes can be displayed best using the GAT 'polygons' and the DP 'max'. These methods should be considered for automated monitoring of udder health in dairy cows. Copyright © 2013 Elsevier Ltd. All rights reserved.

[Comparative study of bond strength between zirconia ceramics and 4 luting cements].

PubMed

Zheng, Hu; Zhang, Xian-Fang; Han, Dong-Wei

2007-02-01

To study the bonding strength of zirconia ceramics with 4 kinds of luting cement materials. Blocks of sintered zirconia ceramics were cut and randomly divided into 4 groups with 16 slices in each group. They were treated with sandblasting and bonded with 4 kinds of luting cements respectively. After preserved in 37 degrees C distilled-water for 24 hours and 30 days, the shear bonding strength of these specimens was tested and the data were analyzed by SAS6.12 software package and bond section were observed by scanning electron microscope. Two-way ANOVA revealed that the group of PanaviaF could attain the highest shear bonding strength: (34.7+/-3.44) MPa (after 24 hours), (31.5+/-3.44) MPa (after 1 month), which was significantly different from other treatment methods (P<0.01). The initial shear bonding strength of the groups of resin-reinforced glass ionomer was (15.5+/-2.71) MPa, (16.0+/-1.77) MPa (after 24 hours) but dropped markedly to (6.80+/-1.24) MPa, (3.38+/-2.32) MPa after 30 days (P<0.05). Resin luting cement containing phosphate monomer (MDP) can provide zirconia ceramics a strong and long-lasting bonding. Resin-reinforced glass ionomer can get good bonding strength too, but can't last long.

[Influence of different ultrasonic irrigation solutions after root canal preparation with ProTaper by machine on micro-hardness of root canal dentin].

PubMed

Guo, Jiang-li; Zhang, Yan; Zhen, Lei

2015-08-01

To develope the influence of different ultrasonic irrigations after root canal preparation with nickel titanium ProTaper on micro-hardness of root canal dentin. Sixty of maxillary anterior teeth with single-canal were collected and randomly divided into 6 groups. Group A was control group, group B was prepared to F3 with nickel titanium ProTaper by machine, group C was ultrasonic irrigated with 3% hydrogen peroxide solution for 1 minute after preparation, group D was ultrasonic irrigated with koutai mouthwash for 1 minute after preparation, group E was ultrasonic irrigated with 17% EDTA solution for 1 minute after preparation, group F was ultrasonic irrigated with distilled water for 1 minute after preparation. The roots were then sectioned horizontally into 3 parts, split longitudinally into halves and examined under a micro Vickers hardness test machine. The data was analyzed by one-way ANOVA and t test with SPSS 17.0 software package. The micro-hardness of group A was (52.66 ± 1.64) HV,(52.08 ± 1.53) HV and (51.47 ± 2.53) HV. There was no significant difference in all parts of the root canal in group A (P>0.05). The micro-hardness of the apical third of root canal was lower than that of the cervical and middle of root canal in the other groups (P<0.05). In the cervical and middle third of the root canals, the micro-hardness of group E was (44.65 ± 1.33) HV and(42.55 ± 1.12) HV, and there were statistical significances between group E and the other groups (P<0.05). In the apical third of root canal,the micro-hardness of group E was (37.82 ± 1.60) HV, and group C was (44.14±1.73) HV, both of the comparative differences with other groups were statistically significant (P<0.05). There was no significant difference among group B, group D and group F (P>0.05). Root canal preparation to F3 with nickel titanium ProTaper by machine can make the micro-hardness of the apical third of root canal decrease. Ultrasonic irrigation with 17% EDTA solution for 1 minute can make the micro-hardness of the root canal decrease ultrasonic irrigation with. Ultrasonic irrigation with 3% hydrogen peroxide can make the micro-hardness of the apical third of root canal decrease. Ultrasonic irrigation with Koutai mouthwash and distilled water for 1 minute have no influence on the micro-hardness of root canal.

Effect of vitamin C supplementation on lipid profile, serum uric acid, and ascorbic acid in children on hemodialysis.

PubMed

El Mashad, Ghada Mohamed; ElSayed, Hanan M; Nosair, Nahla A

2016-01-01

Children with end-stage renal disease (ESRD) suffer from dyslipidemia and hyperuricemia that might play a causal role in the progression of cardiovascular disease (CVD). The aim of the study is to assess the effects of Vitamin C supplementation on uric acid, ascorbic acid, and serum lipid levels among children on hemodialysis (HD). This prospective study was conducted in the pediatric nephrology unit at Menoufia University Hospital. The study included a total of 60 children with ESRD on maintenance HD therapy. They were divided into two groups: Group I (supplemented group, n = 30) received intravenous Vitamin C supplementation and Group II (control, n = 30) received placebo (intravenous saline) for three months. The results are shown as a mean ± standard deviation. Statistical evaluation was performed by SPSS software (version 11.5) using paired t-test. After supplementation with Vitamin C, the serum Vitamin C and high-density lipoprotein levels increased significantly with a significant reduction in the levels of serum uric acid, cholesterol, low-density lipoproteins, and triglyceride at the end of the study period. No significant changes were observed in the control group. Vitamin C can serve as a useful urate lowering medicine in HD patients to avoid complications of hyperuricemia. Furthermore, it had favorable effects on the lipid profile. This improvement can be considered as a preventive strategy in the progression of CVD in HD patients. Vitamin C supplementation improves ascorbic acid deficiency in these patients.

Obliteration dynamics in cerebral arteriovenous malformations after cyberknife radiosurgery: quantification with sequential nidus volumetry and 3-tesla 3-dimensional time-of-flight magnetic resonance angiography.

PubMed

Wowra, Berndt; Muacevic, Alexander; Tonn, Jörg-Christian; Schoenberg, Stefan O; Reiser, Maximilian; Herrmann, Karin A

2009-02-01

To investigate the time-dependent obliteration of cerebral arteriovenous malformations (cAVM) after CyberKnife radiosurgery (CKRS) (Accuray, Inc., Sunnyvale, CA) by means of sequential 3-T, 3-dimensional (3D), time-of-flight (TOF) magnetic resonance angiography (MRA), and volumetry of the arteriovenous malformation (AVM) nidus. In this prospective study, 3D TOF MRA was performed on 20 patients with cAVMs treated by single-fraction CKRS. Three-dimensional TOF MRA was performed on a 3-T, 32-channel magnetic resonance scanner (Magnetom TIM Trio; Siemens Medical Solutions, Erlangen, Germany) with isotropic voxel size at a spatial resolution of 0.6 x 0.6 x 0.6 mm3. The time-dependent relative decay of the transnidal blood flow evidenced by 3D TOF MRA was referred to as "obliteration dynamics." Volumetry of the nidus size was performed with OsiriX imaging software (OsiriX Foundation, Geneva, Switzerland). All patients had 3 to 4 follow-up examinations at 3- to 6-month intervals over a minimum follow-up period of 9 months. Subtotal obliteration was determined if the residual nidus volume was 5% or less of the initial nidus volume. Stata/IC software (Version 10.0; Stata Corp., College Station, TX) was used for statistical analysis and to identify potential factors of AVM obliteration. Regarding their clinical status, case history, and pretreatments, the participants of this study represent difficult-to-treat cAVM patients. The median nidus volume was 1.8 mL (range, 0.4-12.5 mL); the median minimum dose prescribed to the nidus was 22 Gy (range, 16-24 Gy) delivered to the 67% isodose line (range, 55-80%). CKRS was well tolerated, with complications in 2 patients. No further hemorrhages occurred after RS, except 1 small and clinically inapparent incident. The median follow-up period after RS was 25.0 months (range, 11.7-36.8 months). After RS, a statistically significant obliteration was observed in all patients. However, the obliteration dynamics of the cAVMs showed a pronounced variability, with 2 types of post-therapeutic behavior identified. cAVMs of Group A showed a faster reduction of transnidal blood flow than cAVMs in Group B. The median time to subtotal obliteration was 23.8 months for all patients, 11.6 months for patients in Group A, and 27.8 months for patients in Group B (P = 0.05). Logistic regression analysis revealed dose homogeneity and the circumscribed isodose to be the only variables (P < 0.01) associated with the obliteration dynamics in this study. The cumulative complete angiographic obliteration rate was 67% (95% confidence interval, 32-95%) 2 years after RS. The use of sequential 3D TOF MRA at 3 T and nidus volumetry enables a noninvasive quantitative assessment of the dynamic obliteration process induced by CKRS in cAVMs. This method may be helpful to identify factors related to AVM obliteration after RS when larger patient cohorts become available.

Advanced Computing Technologies for Rocket Engine Propulsion Systems: Object-Oriented Design with C++

NASA Technical Reports Server (NTRS)

Bekele, Gete

2002-01-01

This document explores the use of advanced computer technologies with an emphasis on object-oriented design to be applied in the development of software for a rocket engine to improve vehicle safety and reliability. The primary focus is on phase one of this project, the smart start sequence module. The objectives are: 1) To use current sound software engineering practices, object-orientation; 2) To improve on software development time, maintenance, execution and management; 3) To provide an alternate design choice for control, implementation, and performance.

Advanced laser stratospheric monitoring systems analyses

NASA Technical Reports Server (NTRS)

Larsen, J. C.

1984-01-01

This report describes the software support supplied by Systems and Applied Sciences Corporation for the study of Advanced Laser Stratospheric Monitoring Systems Analyses under contract No. NAS1-15806. This report discusses improvements to the Langley spectroscopic data base, development of LHS instrument control software and data analyses and validation software. The effect of diurnal variations on the retrieved concentrations of NO, NO2 and C L O from a space and balloon borne measurement platform are discussed along with the selection of optimum IF channels for sensing stratospheric species from space.

OAST Space Theme Workshop. Volume 3: Working group summary. 9: Aerothermodynamics (M-3). A: Statement. B: Technology needs (form 1). C. Priority assessment (form 2). D. Additional assessments

NASA Technical Reports Server (NTRS)

1976-01-01

Twelve aerothermodynamic space technology needs were identified to reduce the design uncertainties in aerodynamic heating and forces experienced by heavy lift launch vehicles, orbit transfer vehicles, and advanced single stage to orbit vehicles for the space transportation system, and for probes, planetary surface landers, and sample return vehicles for solar system exploration vehicles. Research and technology needs identified include: (1) increasing the fluid dynamics capability by at least two orders of magnitude by developing an advanced computer processor for the solution of fluid dynamic problems with improved software; (2) predicting multi-engine base flow fields for launch vehicles; and (3) developing methods to conserve energy in aerothermodynamic ground test facilities.

CrossTalk, The Journal of Defense Software Engineering. Volume 28 Number 1. Jan/Feb 2015

DTIC Science & Technology

2015-02-01

5.63 1.03 Positive Gain 1.19 42% 1.10 27% 1.20 31% 0.44 12% Table 7. Group 1 & 2 Pretest and Posttest Means and Gain Scores. The one ...linked to team performance [6][7][8] and is considered one of the most important small group variables [9] with cohesion-performance being driven by...increased team cohesion. Measuring Cohesion In order to measure team cohesion, one must first understand the correlated cohesion constructs. The Group

Report on the Third Workshop on Sustainable Software for Science: Practice and Experiences (WSSSPE3)

NASA Astrophysics Data System (ADS)

Katz, Daniel S.; Choi, Sou-Cheng T.; Niemeyer, Kyle E.; Hetherington, James; Löffler, Frank; Gunter, Dan; Idaszak, Ray; Brandt, Steven R.; Miller, Mark A.; Gesing, Sandra; Jones, Nick D.; Weber, Nic; Marru, Suresh; Allen, Gabrielle; Penzenstadler, Birgit; Venters, Colin C.; Davis, Ethan; Hwang, Lorraine; Todorov, Ilian; Patra, Abani; de Val-Borro, Miguel

2016-02-01

This report records and discusses the Third Workshop on Sustainable Software for Science: Practice and Experiences (WSSSPE3). The report includes a description of the keynote presentation of the workshop, which served as an overview of sustainable scientific software. It also summarizes a set of lightning talks in which speakers highlighted to-the-point lessons and challenges pertaining to sustaining scientific software. The final and main contribution of the report is a summary of the discussions, future steps, and future organization for a set of self-organized working groups on topics including developing pathways to funding scientific software; constructing useful common metrics for crediting software stakeholders; identifying principles for sustainable software engineering design; reaching out to research software organizations around the world; and building communities for software sustainability. For each group, we include a point of contact and a landing page that can be used by those who want to join that group's future activities. The main challenge left by the workshop is to see if the groups will execute these activities that they have scheduled, and how the WSSSPE community can encourage this to happen.

Community Interventions to Improve Glycemic Control in African Americans With Type 2 Diabetes: A Systemic Review

PubMed Central

Smalls, Brittany L.; Walker, Rebekah J.; Bonilha, Heather S.; Campbell, Jennifer A.; Egede, Leonard E.

2015-01-01

Purpose: The purpose of this study was to conduct a systematic review of published community interventions to evaluate different components of community interventions and their ability to positively impact glycemic control in African Americans with T2DM. Methods: Medline, PsychInfo, and CINAHL were searched for potentially eligible studies published from January 2000 through January 2012. The following inclusion criteria were established for publications: (1) describe a community intervention, not prevention; (2) specifically indicate, in data analysis and results, the impact of the community intervention on African American adults, 18 years and older; (3) measure glycemic control (HbA1C) as an outcome measure; and (4) involve patients in a community setting, which excludes hospitals and hospital clinics. Results: Thirteen studies out of 9,233 articles identified in the search met the predetermined inclusion criteria. There were 5 randomized control trials and 3 reported improved glycemic control in the intervention group compared to the control group at the completion of the study. Of the 8 studies that were not randomized control trials, 6 showed a statistically significant change in HbA1C. Conclusion: In general, the community interventions assessed led to significant reductions in HbA1C in African Americans with type 2 diabetes. Community health workers did not have a greater impact on glycemic control in this sample. The findings of this study provides insight for designing community-based interventions in the future, such as including use of multiple delivery methods, consideration of mobile device software, nutritionist educator, and curriculum-based approaches. PMID:26156923

The SEL Adapts to Meet Changing Times

NASA Technical Reports Server (NTRS)

Pajerski, Rose S.; Basili, Victor R.

1997-01-01

Since 1976, the Software Engineering Laboratory (SEL) has been dedicated to understanding and improving the way in which one NASA organization, the Flight Dynamics Division (FDD) at Goddard Space Flight Center, develops, maintains, and manages complex flight dynamics systems. It has done this by developing and refining a continual process improvement approach that allows an organization such as the FDD to fine-tune its process for its particular domain. Experimental software engineering and measurement play a significant role in this approach. The SEL is a partnership of NASA Goddard, its major software contractor, Computer Sciences Corporation (CSC), and the University of Maryland's (LTM) Department of Computer Science. The FDD primarily builds software systems that provide ground-based flight dynamics support for scientific satellites. They fall into two sets: ground systems and simulators. Ground systems are midsize systems that average around 250 thousand source lines of code (KSLOC). Ground system development projects typically last 1 - 2 years. Recent systems have been rehosted to workstations from IBM mainframes, and also contain significant new subsystems written in C and C++. The simulators are smaller systems averaging around 60 KSLOC that provide the test data for the ground systems. Simulator development lasts up to 1 year. Most of the simulators have been built in Ada on workstations. The SEL is responsible for the management and continual improvement of the software engineering processes used on these FDD projects.

GammaLib and ctools. A software framework for the analysis of astronomical gamma-ray data

NASA Astrophysics Data System (ADS)

Knödlseder, J.; Mayer, M.; Deil, C.; Cayrou, J.-B.; Owen, E.; Kelley-Hoskins, N.; Lu, C.-C.; Buehler, R.; Forest, F.; Louge, T.; Siejkowski, H.; Kosack, K.; Gerard, L.; Schulz, A.; Martin, P.; Sanchez, D.; Ohm, S.; Hassan, T.; Brau-Nogué, S.

2016-08-01

The field of gamma-ray astronomy has seen important progress during the last decade, yet to date no common software framework has been developed for the scientific analysis of gamma-ray telescope data. We propose to fill this gap by means of the GammaLib software, a generic library that we have developed to support the analysis of gamma-ray event data. GammaLib was written in C++ and all functionality is available in Python through an extension module. Based on this framework we have developed the ctools software package, a suite of software tools that enables flexible workflows to be built for the analysis of Imaging Air Cherenkov Telescope event data. The ctools are inspired by science analysis software available for existing high-energy astronomy instruments, and they follow the modular ftools model developed by the High Energy Astrophysics Science Archive Research Center. The ctools were written in Python and C++, and can be either used from the command line via shell scripts or directly from Python. In this paper we present the GammaLib and ctools software versions 1.0 that were released at the end of 2015. GammaLib and ctools are ready for the science analysis of Imaging Air Cherenkov Telescope event data, and also support the analysis of Fermi-LAT data and the exploitation of the COMPTEL legacy data archive. We propose using ctools as the science tools software for the Cherenkov Telescope Array Observatory.

ENHANCING REMINERALIZATION OF PRIMARY ENAMEL LESIONS WITH FLUORIDE DENTIFRICE CONTAINING TRICALCIUM PHOSPHATE.

PubMed

Rirattanapong, Praphasri; Vongsavan, Kadkao; Saengsirinavin, Chavengkiat; Waidee, Sumana

2017-03-01

Fluoride dentifrice is effective in preventive dental caries but may cause fluorosis, especially in young children. Reducing the concentration of fluoride from the regular concentration of 1,000 parts per million (ppm) to 500 ppm can reduce the risk for fluorosis but increases the risk of caries. Adding tricalcium phosphate (TCP) to the dentifrices may improve the efficacy of remineralization possibly allowing for a lower concentration of fluoride to reduce the risk of fluorosis. We studied this to inform future caries prevention efforts in children. We immersed 40 sound primary incisors into demineralizing solution (pH=4.4) for 96 hours at 37°C to create demineralized lesions. The 40 teeth were then divided into 4 groups of 10 teeth each. Group A: control (treated with deionized water only); Group B: treated with fluoride dentifrice at a concentration of 1,000 ppm; Group C: treated with fluoride dentifrice at a concentration of 500 ppm and 500 ppm TCP, and Group D: treated with fluoride dentifrice at a concentration of 1,000 ppm and 500 ppm TCP. The teeth were each subjected to 7 days of pH-cycling and the studied dentifrice was applied for one minute, 3 times daily during the 7 day period. After the 7 day period the teeth were each sectioned and examined with polarized light microscopy. The depths of demineralized areas were measured using Image-Pro plus software. A pair t-test was used to compare lesion depths before and after dentifrice treatment. Differences in mean lesion depths within each group were analyzed using the One-way ANOVA and LSD tests; a 95% confidence intervals were calculated. The mean lesion depths in all the groups before dentifrice treatment were not significantly different (p=0.143). The mean demineralized lesion depths after dentifrice treatment were significantly different by group (p=0.00). The mean demineralized lesion depth in Group A significantly deeper than the other groups (p=0.00). Group D had the shallowest depth, significantly shallower than the other groups (p=0.006). There was no significant difference in the mean demineralized lesion depth between Groups B and C (p=0.478). The mean demineralized lesion depth changed significantly after dentifrice treatment in all the groups (p=0.00). Group A was significantly deeper (p=0.00) and groups B, C and D were all significantly shallow. Group D had the greatest reduction in mean demineralized lesion depth (p<0.05). The 1,000 ppm fluoride plus TCP dentifrice gave superior remineralization than the 500 ppm fluoride plus TCP and the 1,000 ppm fluoride dentifrice. The 500 ppm fluoride plus TCP gave the same remineralizing effect as the 1,000 ppm fluoride dentifrice. TCP enhances remineralization on primary enamel when added to fluoride dentifrice. Our results show if TCP is added to fluoride dentifrice a lower concentration of fluoride is needed to provide the same benefit as fluoride dentifrice with a higher concentration of fluoride, reducing the risk of fluorosis in children.

Influence of cyclical fatigue on torsional fracture morphology in endodontic instruments.

PubMed

Lopreite, Gustavo; Basilaki, Jorge; Hecht, Pedro

2013-01-01

Cyclical fatigue may influence the appearance and propagation of the type of fracture of an endodontic instrument. The aim of this study was to assess the influence of cyclic fatigue on morphological features of torsional fracture in Pathfile nickel-titanium rotary instruments for surgical preparation in endodontics. Thirty new Pathfile instruments (Dentsply- Maillefer. Ballaigues-Switzerland) diameter .13 and taper .02 were randomly divided into 5 groups (n = 6). Twenty-four of them were subject to cyclical fatigue by continuous rotation using a stainless steel cylinder with internal bore 0.5 mm, length 25 mm, with a curve of 45 degrees and radius 8 mm at 5 mm from the tip, at 300 rpm and 1 Ncm torque for different times: A: 15 sec, B: 75 sec, C: 150 sec and D: 300 sec, while the fifth group was kept as a control (group N). As a second step, the instruments were rotated at 2 rpm and 1 Ncm torque, with their apical 3 mm fixed in a resin block until they suffered torsional fracture. The fracture surfaces were analyzed using a conventional high-vacuum scanning electron microscope (Phillips mod. 515) at 400x. All instruments had ductile fracture areas of different sizes. The ductile fracture areas were measured as percentages of the total area of the instrument by means of Golden Ratio (Softonic) software for measuring images. The data obtained were analyzed statistically using one-way variance analysis followed by Tukey's multiple comparison test. There were significant differences among groups regarding cyclic fatigue time and fragile fracture area (P < .001). Comparison of percentages shows five significant differences between N/C; N/D; A/D; C/N and C/A. No other comparison was significant. It is concluded that the increase in cyclical fatigue to which the rotating PathFile instrument is subject significantly increases the percentage of ductile fracture area produced by torsion.

Comparing sports vision among three groups of soft tennis adolescent athletes: Normal vision, refractive errors with and without correction.

PubMed

Chang, Shih-Tsun; Liu, Yen-Hsiu; Lee, Jiahn-Shing; See, Lai-Chu

2015-09-01

The effect of correcting static vision on sports vision is still not clear. To examine whether sports vision (depth perception [DP], dynamic visual acuity [DVA], eye movement [EM], peripheral vision [PV], and momentary vision [MV],) were different among soft tennis adolescent athletes with normal vision (Group A), with refractive error and corrected with (Group B) and without eyeglasses (Group C). A cross-section study was conducted. Soft tennis athletes aged 10-13 who played softball tennis for 2-5 years, and who were without any ocular diseases and without visual training for the past 3 months were recruited. DPs were measured in an absolute deviation (mm) between a moving rod and fixing rod (approaching at 25 mm/s, receding at 25 mm/s, approaching at 50 mm/s, receding at 50 mm/s) using electric DP tester. A smaller deviation represented better DP. DVA, EM, PV, and MV were measured on a scale from 1 (worse) to 10 (best) using ATHLEVISION software. Chi-square test and Kruskal-Wallis test was used to compare the data among the three study groups. A total of 73 athletes (37 in Group A, 8 in Group B, 28 in Group C) were enrolled in this study. All four items of DP showed significant difference among the three study groups (P = 0.0051, 0.0004, 0.0095, 0.0021). PV displayed significant difference among the three study groups (P = 0.0044). There was no significant difference in DVA, EM, and MV among the three study groups. Significant better DP and PV were seen among soft tennis adolescent athletes with normal vision than those with refractive error regardless whether they had eyeglasses corrected. On the other hand, DVA, EM, and MV were similar among the three study groups.

The Effect of BCAA and ISO-WHEY Oral Nutritional Supplements on Dialysis Adequacy.

PubMed

Afaghi, Effat; Tayebi, Ali; Ebadi, Abbas; Sobhani, Vahid; Einollahi, Behzad; Tayebi, Mehdi

2016-11-01

Protein-energy malnutrition is a common problem in hemodialysis patients and has different outcomes such as reduced quality of life, longer hospitalization time, lower dialysis adequacy, and higher mortality rate. Investigation of dialysis adequacy is an important method for assessing hemodialysis patients, and improving the dialysis adequacy is an important healthcare team goal. The present study aims to investigate and compare the effects of BCAA and ISO-WHEY oral nutritional supplements on dialysis adequacy. In a clinical trial study, 66 hemodialysis patients were randomly divided into three groups: Group A (n = 22), Group B (n = 22), and Group C or the control group (n = 22). In Groups A and B, as prescribed and controlled by nutritionists and nephrologists, respectively, ISO-WHEY and BCAA protein powder were used for 2 months on a daily basis. For all groups, before intervention and 1 and 2 months after intervention, the dialysis adequacy was measured using URR and Kt/V. Finally, the data were analyzed using IBM SPSS Statistics Base 21.0 software. Out of 66 patients, 61 (19 in Group A, 20 in Group B, and 22 in Group C) completed the study period, and before intervention, all groups were equal in terms of quality and quantity variables (P > 0.05). After intervention, there was a significant difference between the three groups with regard to the variables of dialysis adequacy based on Kt/V and URR to independent-t test and repeated measures ANOVA (P < 0.05). Results show that the intake of oral nutritional supplements leads to an improvement in the dialysis adequacy of hemodialysis patients. Therefore, the use of nutritional supplements along with patients' training and regular consultation will be helpful in improving the nutritional status, dialysis adequacy, and eventually the quality of life.

[The research of establishing discriminant function for patients with angina pectoris by stepwise analysis based on serum inflammatory factors].

PubMed

Chen, Zhi-bin; Liang, Yan-bing; Tang, Hao; Wang, Zhong-hua; Zeng, Li-jin; Wu, Jing-guo; Li, Zhen-yu; Ma, Zhong-fu

2012-12-01

To improve cost-efficiency, discriminant functions in stepwise method was founded for the differential diagnosis of angina pectoris by detecting the serum level of high-sensitivity C-reactive protein (hs-CRP), macrophage migration inhibitory factor (MIF), interleukin-4 (IL-4) and interleukin-10 (IL-10) in patients with stable angina pectoris (SAP) and unstable angina pectoris (UAP). Thirty-nine SAP patients and 47 UAP patients were enrolled into the study, while 39 healthy volunteers were enrolled into the controlled group forming the entire set of training samples. The serum levels of hs-CRP, MIF, IL-4 and IL-10 were measured by enzyme linked immunosorbent assay (ELISA). Data was analyzed by software to define discriminant functions in the ways of "entering" and "stepwise". Both functions were evaluated by the results of validation. By the way of "enter independent together", the following discriminant functions were defined based on the data of training samples' age, hs-CRP, MIF, IL-4, IL-10: healthy control group =-129.858 + 2.869×age -2.451×hs-CRP + 1.393×MIF + 6.001×IL-4 + 4.848×IL-10; SAP group=-161.037 + 2.896×age-2.022×hs-CRP + 1.662×MIF + 6.703×IL-4 + 6.287×IL-10; UAP group=-199.087 + 2.468×age-1.440×hs-CRP + 3.404×MIF-13.875×IL-4 + 7.752×IL-10. Retrospective validation showed 4.8% of total miss-grouping, while cross-validation showed 5.6% of total miss-grouping. By the way of "stepwise", the above data was screened by software and training samples' age, MIF and IL-10 were suggested to define the following functions: healthy control group = - 125.218 + 2.659 × age + 0.599×MIF + 5.040 × IL-10; SAP group=-157.864 + 2.721×age + 1.008×MIF + 6.468×IL-10; UAP group=- 197.327 + 2.360×age + 2.932×MIF + 7.640×IL-10. Both retrospective and cross validation showed 6.4% of total miss-grouping. Both sets of discriminant functions had the same efficiency (100%) for differential diagnosis of SAP and UAP. The discriminant functions based on samples' age, MIF and IL-10, which were screened and suggested by stepwise method, may contribute to the differential diagnosis of atypical SAP and UAP, and therefore demonstrate better cost-efficiency.

A Summary of Taxonomies of Digital System Failure Modes Provided by the DigRel Task Group

DOE Office of Scientific and Technical Information (OSTI.GOV)

Chu T. L.; Yue M.; Postma, W.

2012-06-25

Recently, the CSNI directed WGRisk to set up a task group called DIGREL to initiate a new task on developing a taxonomy of failure modes of digital components for the purposes of PSA. It is an important step towards standardized digital I&C reliability assessment techniques for PSA. The objective of this paper is to provide a comparison of the failure mode taxonomies provided by the participants. The failure modes are classified in terms of their levels of detail. Software and hardware failure modes are discussed separately.

The SCEC Broadband Platform: A Collaborative Open-Source Software Package for Strong Ground Motion Simulation and Validation

NASA Astrophysics Data System (ADS)

Silva, F.; Maechling, P. J.; Goulet, C.; Somerville, P.; Jordan, T. H.

2013-12-01

The Southern California Earthquake Center (SCEC) Broadband Platform is a collaborative software development project involving SCEC researchers, graduate students, and the SCEC Community Modeling Environment. The SCEC Broadband Platform is open-source scientific software that can generate broadband (0-100Hz) ground motions for earthquakes, integrating complex scientific modules that implement rupture generation, low and high-frequency seismogram synthesis, non-linear site effects calculation, and visualization into a software system that supports easy on-demand computation of seismograms. The Broadband Platform operates in two primary modes: validation simulations and scenario simulations. In validation mode, the Broadband Platform runs earthquake rupture and wave propagation modeling software to calculate seismograms of a historical earthquake for which observed strong ground motion data is available. Also in validation mode, the Broadband Platform calculates a number of goodness of fit measurements that quantify how well the model-based broadband seismograms match the observed seismograms for a certain event. Based on these results, the Platform can be used to tune and validate different numerical modeling techniques. During the past year, we have modified the software to enable the addition of a large number of historical events, and we are now adding validation simulation inputs and observational data for 23 historical events covering the Eastern and Western United States, Japan, Taiwan, Turkey, and Italy. In scenario mode, the Broadband Platform can run simulations for hypothetical (scenario) earthquakes. In this mode, users input an earthquake description, a list of station names and locations, and a 1D velocity model for their region of interest, and the Broadband Platform software then calculates ground motions for the specified stations. By establishing an interface between scientific modules with a common set of input and output files, the Broadband Platform facilitates the addition of new scientific methods, which are written by earth scientists in a number of languages such as C, C++, Fortran, and Python. The Broadband Platform's modular design also supports the reuse of existing software modules as building blocks to create new scientific methods. Additionally, the Platform implements a wrapper around each scientific module, converting input and output files to and from the specific formats required (or produced) by individual scientific codes. Working in close collaboration with scientists and research engineers, the SCEC software development group continues to add new capabilities to the Broadband Platform and to release new versions as open-source scientific software distributions that can be compiled and run on many Linux computer systems. Our latest release includes the addition of 3 new simulation methods and several new data products, such as map and distance-based goodness of fit plots. Finally, as the number and complexity of scenarios simulated using the Broadband Platform increase, we have added batching utilities to substantially improve support for running large-scale simulations on computing clusters.

Cybersickness provoked by head-mounted display affects cutaneous vascular tone, heart rate and reaction time.

PubMed

Nalivaiko, Eugene; Davis, Simon L; Blackmore, Karen L; Vakulin, Andrew; Nesbitt, Keith V

2015-11-01

Evidence from studies of provocative motion indicates that motion sickness is tightly linked to the disturbances of thermoregulation. The major aim of the current study was to determine whether provocative visual stimuli (immersion into the virtual reality simulating rides on a rollercoaster) affect skin temperature that reflects thermoregulatory cutaneous responses, and to test whether such stimuli alter cognitive functions. In 26 healthy young volunteers wearing head-mounted display (Oculus Rift), simulated rides consistently provoked vection and nausea, with a significant difference between the two versions of simulation software (Parrot Coaster and Helix). Basal finger temperature had bimodal distribution, with low-temperature group (n=8) having values of 23-29 °C, and high-temperature group (n=18) having values of 32-36 °C. Effects of cybersickness on finger temperature depended on the basal level of this variable: in subjects from former group it raised by 3-4 °C, while in most subjects from the latter group it either did not change or transiently reduced by 1.5-2 °C. There was no correlation between the magnitude of changes in the finger temperature and nausea score at the end of simulated ride. Provocative visual stimulation caused prolongation of simple reaction time by 20-50 ms; this increase closely correlated with the subjective rating of nausea. Lastly, in subjects who experienced pronounced nausea, heart rate was elevated. We conclude that cybersickness is associated with changes in cutaneous thermoregulatory vascular tone; this further supports the idea of a tight link between motion sickness and thermoregulation. Cybersickness-induced prolongation of reaction time raises obvious concerns regarding the safety of this technology. Copyright © 2015 Elsevier Inc. All rights reserved.

Mobile phone-assisted basic life support augmented with a metronome.

PubMed

Paal, Peter; Pircher, Iris; Baur, Thomas; Gruber, Elisabeth; Strasak, Alexander M; Herff, Holger; Brugger, Hermann; Wenzel, Volker; Mitterlechner, Thomas

2012-09-01

Basic life support (BLS) performed by lay rescuers is poor. We developed software for mobile phones augmented with a metronome to improve BLS. To assess BLS in lay rescuers with or without software assistance. Medically untrained volunteers were randomized to run through a cardiac arrest scenario with ("assisted BLS") or without ("non-assisted BLS") the aid of a BLS software program installed on a mobile phone. Sixty-four lay rescuers were enrolled in the "assisted BLS" and 77 in the "non-assisted BLS" group. The "assisted BLS" when compared to the "non-assisted BLS" group, achieved a higher overall score (19.2 ± 7.5 vs. 12.9 ± 5.7 credits; p < 0.001). Moreover, the "assisted BLS" when compared to the "non-assisted" group checked (64% vs. 27%) and protected themselves more often from environmental risks (70% vs. 39%); this group also called more often for help (56% vs. 27%), opened the upper airway (78% vs. 16%), and had more correct chest compressions rates (44% ± 38% vs. 14% ± 28%; all p < 0.001). However, the "assisted BLS" when compared to the "non-assisted BLS" group, was slower in calling the dispatch center (113.6 ± 86.4 vs. 54.1 ± 45.1 s; p < 0.001) and starting chest compressions (165.3 ± 93.3 vs. 87.1 ± 53.2 s; p < 0.001). "Assisted BLS" augmented by a metronome resulted in a higher overall score and a better chest compression rate when compared to "non-assisted BLS." However, in the "assisted BLS" group, time to call the dispatch center and to start chest compressions was longer. In both groups, lay persons did not ventilate satisfactorily during this cardiac arrest scenario. Copyright © 2012 Elsevier Inc. All rights reserved.

Application of ChemDraw NMR Tool: Correlation of Program-Generated 13C Chemical Shifts and pKa Values of para-Substituted Benzoic Acids

NASA Astrophysics Data System (ADS)

Wang, Hongyi

2005-09-01

An application of ChemDraw NMR Tool was demonstrated by correlation of program-generated 13 C NMR chemical shifts and p K a values of para-substituted benzoic acids. Experimental 13 C NMR chemical shifts were analyzed in the same way for comparison. The project can be used as an assignment at the end of the first-year organic chemistry course to review topics or explore new techniques: Hammett equation, acid base equilibrium theory, electronic nature of functional groups, inductive and resonance effects, structure reactivity relationship, NMR spectroscopy, literature search, database search, and ChemDraw software.

Home noninvasive positive pressure ventilation with built-in software in stable hypercapnic COPD: a short-term prospective, multicenter, randomized, controlled trial.

PubMed

Zhou, Luqian; Li, Xiaoying; Guan, Lili; Chen, Jianhua; Guo, Bingpeng; Wu, Weiliang; Huo, Yating; Zhou, Ziqing; Liang, Zhenyu; Zhou, Yuqi; Tan, Jie; Chen, Xin; Song, Yuanlin; Chen, Rongchang

2017-01-01

The benefits of noninvasive positive pressure ventilation (NPPV) in patients with hypercapnic COPD are controversial. It is presumed that methodology and appropriate use of NIV ventilator might be crucial for the outcomes. With the new built-in software, the performance of NIV can be monitored at home, which can guarantee the compliance and appropriate use. This study investigated effects of home use of NIV in hypercapnia in COPD patients using the NIV ventilator with built-in software for monitoring. The current multicenter prospective, randomized, controlled trial enrolled patients with stable GOLD stages III and IV hypercapnic COPD. Patients were randomly assigned via a computer-generated randomization sequence, with a block size of four patients, to continue optimized treatment (control group) or to receive additional NPPV (intervention group) for 3 months. The primary outcome was arterial carbon dioxide pressure (PaCO 2 ). Data were derived from built-in software and analyzed every 4 weeks. Analysis was carried out with the intention to treat. This study is registered with ClinicalTrials.gov, number NCT02499718. Patients were recruited from 20 respiratory units in China from October 1, 2015, and recruitment was terminated with a record of the vital statistics on May 31, 2016. A total of 115 patients were randomly assigned to the NPPV group (n=57) or the control group (n=58). Patients complied well with NPPV therapy (mean [± standard deviation] day use 5.6±1.4 h). The mean estimation of leaks was 37.99±13.71 L/min. The changes in PaCO 2 (-10.41±0.97 vs -4.32±0.68 mmHg, P =0.03) and 6-min walk distance (6MWD) (38.2% vs 18.2%, P =0.02) were statistically significant in the NPPV group versus the control group. COPD assessment test (CAT) showed a positive trend ( P =0.06) in favor of the NPPV group. Pulmonary function and dyspnea were not different between groups. Ventilators equipped with built-in software provided methodology for monitoring NIV use at home, which could facilitate the improvement of compliance and quality control of NIV use. It was shown that three months use of NIV at home could reduce the PaCO 2 and improve exercise tolerance (6MWD) in chronic hypercapnic COPD patients.

Using Group Explorer in teaching abstract algebra

NASA Astrophysics Data System (ADS)

Schubert, Claus; Gfeller, Mary; Donohue, Christopher

2013-04-01

This study explores the use of Group Explorer in an undergraduate mathematics course in abstract algebra. The visual nature of Group Explorer in representing concepts in group theory is an attractive incentive to use this software in the classroom. However, little is known about students' perceptions on this technology in learning concepts in abstract algebra. A total of 26 participants in an undergraduate course studying group theory were surveyed regarding their experiences using Group Explorer. Findings indicate that all participants believed that the software was beneficial to their learning and described their attitudes regarding the software in terms of using the technology and its helpfulness in learning concepts. A multiple regression analysis reveals that representational fluency of concepts with the software correlated significantly with participants' understanding of group concepts yet, participants' attitudes about Group Explorer and technology in general were not significant factors.

Naval Observatory Vector Astrometry Software (NOVAS) Version 3.1, Introducing a Python Edition

NASA Astrophysics Data System (ADS)

Barron, Eric G.; Kaplan, G. H.; Bangert, J.; Bartlett, J. L.; Puatua, W.; Harris, W.; Barrett, P.

2011-01-01

The Naval Observatory Vector Astrometry Software (NOVAS) is a source-code library that provides common astrometric quantities and transformations. NOVAS calculations are accurate at the sub-milliarcsecond level. The library can supply, in one or two subroutine or function calls, the instantaneous celestial position of any star or planet in a variety of coordinate systems. NOVAS also provides access to all of the building blocks that go into such computations. NOVAS Version 3.1 introduces a Python edition alongside the Fortran and C editions. The Python edition uses the computational code from the C edition and, currently, mimics the function calls of the C edition. Future versions will expand the functionality of the Python edition to harness the object-oriented nature of the Python language, and will implement the ability to handle large quantities of objects or observers using the array functionality in NumPy (a third-party scientific package for Python). NOVAS 3.1 also adds a module to transform GCRS vectors to the ITRS; the ITRS to GCRS transformation was already provided in NOVAS 3.0. The module that corrects an ITRS vector for polar motion has been modified to undo that correction upon demand. In the C edition, the ephemeris-access functions have been revised for use on 64-bit systems and for improved performance in general. NOVAS, including documentation, is available from the USNO website (http://www.usno.navy.mil/USNO/astronomical-applications/software-products/novas).

Manual limbal markings versus iris-registration software for correction of myopic astigmatism by laser in situ keratomileusis.

PubMed

Shen, Elizabeth P; Chen, Wei-Li; Hu, Fung-Rong

2010-03-01

To compare the efficacy and safety of manual limbal markings and wavefront-guided treatment with iris-registration software in laser in situ keratomileusis (LASIK) for myopic astigmatism. National Taiwan University Hospital, Taipei, Taiwan. Eyes with myopic astigmatism had LASIK with a Technolas 217z laser. Eyes in the limbal-marking group had conventional LASIK (PlanoScan or Zyoptix tissue-saving algorithm) with manual cyclotorsional-error adjustments according to 2 limbal marks. Eyes in the iris-registration group had wavefront-guided ablation (Zyoptix) in which cyclotorsional errors were automatically detected and adjusted. Refraction, corneal topography, and visual acuity data were compared between groups. Vector analysis was by the Alpins method. The mean preoperative spherical equivalent (SE) was -6.64 diopters (D) +/- 1.99 (SD) in the limbal-marking group and -6.72 +/- 1.86 D in the iris-registration group (P = .92). At 6 months, the mean SE was -0.42 +/- 0.63 D and -0.47 +/- 0.62 D, respectively (P = .08). There was no statistically significant difference between groups in the astigmatism correction, success, or flattening index values using 6-month postoperative refractive data. The angle of error was within +/-10 degrees in 73% of eyes in the limbal-marking group and 75% of eyes in the iris-registration group. Manual limbal markings and iris-registration software were equally effective and safe in LASIK for myopic astigmatism, showing that checking cyclotorsion by manual limbal markings is a safe alternative when automated systems are not available. Copyright 2010 ASCRS and ESCRS. Published by Elsevier Inc. All rights reserved.

Natural Tasking of Robots Based on Human Interaction Cues

DTIC Science & Technology

2005-06-01

MIT. • Matthew Marjanovic , researcher, ITA Software. • Brian Scasselatti, Assistant Professor of Computer Science, Yale. • Matthew Williamson...2004. 25 [74] Charlie C. Kemp. Shoes as a platform for vision. 7th IEEE International Symposium on Wearable Computers, 2004. [75] Matthew Marjanovic ...meso: Simulated muscles for a humanoid robot. Presentation for Humanoid Robotics Group, MIT AI Lab, August 2001. [76] Matthew J. Marjanovic . Teaching

Curcumin may serve an anticancer role in human osteosarcoma cell line U-2 OS by targeting ITPR1.

PubMed

Luo, Zhanpeng; Li, Dawei; Luo, Xiaobo; Li, Litao; Gu, Suxi; Yu, Long; Ma, Yuanzheng

2018-04-01

The present study aimed to determine the mechanisms of action of curcumin in osteosarcoma. Human osteosarcoma U-2 OS cells was purchased from the Cell Bank of the Chinese Academy of Sciences. RNA sequencing analysis was performed for 2 curcumin-treated samples and 2 control samples using Illumina deep sequencing technology. The differentially expressed genes were identified using Cufflink software. Enrichment and protein-protein interaction network analyses were performed separately using cluster Profiler package and Cytoscape software to identify key genes. Then, the mRNA levels of key genes were detected by quantitative reverse transcription polymerase chain reaction (RT-qPCR) in U-2 OS cells. Finally, cell apoptosis, proliferation, migration and invasion arrays were performed. In total, 201 DEGs were identified in the curcumin-treated group. EEF1A1 (degree=88), ATF7IP, HIF1A, SMAD7, CLTC, MCM10, ITPR1, ADAM15, WWP2 and ATP5C1, which were enriched in 'biological process', exhibited higher degrees than other genes in the PPI network. RT-qPCR demonstrated that treatment with curcumin was able to significantly increase the levels of CLTC and ITPR1 mRNA in curcumin-treated cells compared with control. In addition, targeting ITPR1 with curcumin significantly promoted apoptosis and suppressed proliferation, migration and invasion. Targeting ITPR1 via curcumin may serve an anticancer role by mediating apoptosis, proliferation, migration and invasion in U-2 OS cells.

Producing genome structure populations with the dynamic and automated PGS software.

PubMed

Hua, Nan; Tjong, Harianto; Shin, Hanjun; Gong, Ke; Zhou, Xianghong Jasmine; Alber, Frank

2018-05-01

Chromosome conformation capture technologies such as Hi-C are widely used to investigate the spatial organization of genomes. Because genome structures can vary considerably between individual cells of a population, interpreting ensemble-averaged Hi-C data can be challenging, in particular for long-range and interchromosomal interactions. We pioneered a probabilistic approach for the generation of a population of distinct diploid 3D genome structures consistent with all the chromatin-chromatin interaction probabilities from Hi-C experiments. Each structure in the population is a physical model of the genome in 3D. Analysis of these models yields new insights into the causes and the functional properties of the genome's organization in space and time. We provide a user-friendly software package, called PGS, which runs on local machines (for practice runs) and high-performance computing platforms. PGS takes a genome-wide Hi-C contact frequency matrix, along with information about genome segmentation, and produces an ensemble of 3D genome structures entirely consistent with the input. The software automatically generates an analysis report, and provides tools to extract and analyze the 3D coordinates of specific domains. Basic Linux command-line knowledge is sufficient for using this software. A typical running time of the pipeline is ∼3 d with 300 cores on a computer cluster to generate a population of 1,000 diploid genome structures at topological-associated domain (TAD)-level resolution.

Software Development Group. Software Review Center. Microcomputing Working Paper Series.

ERIC Educational Resources Information Center

Perkey, Nadine; Smith, Shirley C.

Two papers describe the roles of the Software Development Group (SDG) and the Software Review Center (SRC) at Drexel University. The first paper covers the primary role of the SDG, which is designed to assist Drexel faculty with the technical design and programming of courseware for the Apple Macintosh microcomputer; the relationship of the SDG…

Radiofrequency ablation of liver metastases-software-assisted evaluation of the ablation zone in MDCT: tumor-free follow-up versus local recurrent disease.

PubMed

Keil, Sebastian; Bruners, Philipp; Schiffl, Katharina; Sedlmair, Martin; Mühlenbruch, Georg; Günther, Rolf W; Das, Marco; Mahnken, Andreas H

2010-04-01

The purpose of this study was to investigate differences in change of size and CT value between local recurrences and tumor-free areas after CT-guided radiofrequency ablation (RFA) of hepatic metastases during follow-up by means of dedicated software for automatic evaluation of hepatic lesions. Thirty-two patients with 54 liver metastases from breast or colorectal cancer underwent triphasic contrast-enhanced multidetector-row computed tomography (MDCT) to evaluate hepatic metastatic spread and localization before CT-guided RFA and for follow-up after intervention. Sixteen of these patients (65.1 + or - 10.3 years) with 30 metastases stayed tumor-free (group 1), while the other group (n = 16 with 24 metastases; 62.0 + or - 13.8 years) suffered from local recurrent disease (group 2). Applying an automated software tool (SyngoCT Oncology; Siemens Healthcare, Forchheim, Germany), size parameters (volume, RECIST, WHO) and attenuation were measured within the lesions before, 1 day after, and 28 days after RFA treatment. The natural logarithm (ln) of the quotient of the volume 1 day versus 28 days after RFA treament was computed: lnQ1//28/0(volume). Analogously, ln ratios of RECIST, WHO, and attenuation were computed and statistically evaluated by repeated-measures ANOVA. One lesion in group 2 was excluded from further evaluation due to automated missegmentation. Statistically significant differences between the two groups were observed with respect to initial volume, RECIST, and WHO (p < 0.05). Furthermore, ln ratios corresponding to volume, RECIST, and WHO differed significantly between the two groups. Attenuation evaluations showed no significant differences, but there was a trend toward attenuation assessment for the parameter lnQ28/0(attenuation) (p = 0.0527), showing higher values for group 1 (-0.4 + or - 0.3) compared to group 2 (-0.2 + or - 0.2). In conclusion, hepatic metastases and their zone of coagulation necrosis after RFA differed significantly between tumor-free and local-recurrent ablation zones with respect to the corresponding size parameters. A new parameter (lnQ1//28/0(volume/RECIST/WHO/attenuation)) was introduced, which appears to be of prognostic value at early follow-up CT.

EvOligo: A Novel Software to Design and Group Libraries of Oligonucleotides Applicable for Nucleic Acid-Based Experiments.

PubMed

Milewski, Marek C; Kamel, Karol; Kurzynska-Kokorniak, Anna; Chmielewski, Marcin K; Figlerowicz, Marek

2017-10-01

Experimental methods based on DNA and RNA hybridization, such as multiplex polymerase chain reaction, multiplex ligation-dependent probe amplification, or microarray analysis, require the use of mixtures of multiple oligonucleotides (primers or probes) in a single test tube. To provide an optimal reaction environment, minimal self- and cross-hybridization must be achieved among these oligonucleotides. To address this problem, we developed EvOligo, which is a software package that provides the means to design and group DNA and RNA molecules with defined lengths. EvOligo combines two modules. The first module performs oligonucleotide design, and the second module performs oligonucleotide grouping. The software applies a nearest-neighbor model of nucleic acid interactions coupled with a parallel evolutionary algorithm to construct individual oligonucleotides, and to group the molecules that are characterized by the weakest possible cross-interactions. To provide optimal solutions, the evolutionary algorithm sorts oligonucleotides into sets, preserves preselected parts of the oligonucleotides, and shapes their remaining parts. In addition, the oligonucleotide sets can be designed and grouped based on their melting temperatures. For the user's convenience, EvOligo is provided with a user-friendly graphical interface. EvOligo was used to design individual oligonucleotides, oligonucleotide pairs, and groups of oligonucleotide pairs that are characterized by the following parameters: (1) weaker cross-interactions between the non-complementary oligonucleotides and (2) more uniform ranges of the oligonucleotide pair melting temperatures than other available software products. In addition, in contrast to other grouping algorithms, EvOligo offers time-efficient sorting of paired and unpaired oligonucleotides based on various parameters defined by the user.

National Conference on the Educational Applications of Geographic Information Systems (EdGIS): Conference Report (1st, Washington, D.C., January 27-29, 1994).

ERIC Educational Resources Information Center

Barstow, Daniel, Ed.; And Others

The goals of the Educational Applications of Geographic Information Systems (EdGIS) Conference were to: showcase current applications of Geographic Information Systems (GIS), remote sensing, and other mapping software in pre-college education; develop a better understanding of the current state of the art in both GIS software and related…

Nutrient Intake, Apolipoprotein A5 -1131T>C Polymorphism and Its Relationship with Obesity

NASA Astrophysics Data System (ADS)

Sari, M. I.; Sari, D. I.

2017-03-01

Obesity is associated with the development of some of the most prevalent diseases of modern society. The World Health Organization estimates that at least 2.8 million adult die each year as result of being obesity. Nutrient intake is a key environmental factor that may interact with genotype to affect risk of obesity. The aim of study was assess the relation between nutrient intake and apolipoprotein A5 -1131T>C polimorphism with obesity. A cross sectional study has been carried out on 139 subjects. Nutrient intake data was collected by using a 24 hour dietary recall and analyzed by nutrisurvey software. Anthropometric variables were measured and body mass index (BMI). Apolipoprotein A5 -1131T>C polymorphism was visualized with 5% agarose gel after restriction length fragment polymorphism (RFLP) digested with MseI. Results : Subjects in this study were 55 male and 84 female, with average age 19.20 ± 1.08, 75 had obese and 64 non obese. Based on the chi square test is found a relationship between total energy intake and protein intake in obese group compared to the non-obese group (p = 0.029, p = 0.006) and no relationship was found in Apolipoprotein A5 -1131T> C polymorphism with obesity. These findings indicate that nutrient intake no depending with apolipoprotein A5 gene variant to modulate obesity

Payload specialist station study. Volume 3: Program study cost estimates. Part 1: Work breakdown structure

NASA Technical Reports Server (NTRS)

1976-01-01

The work breakdown structure (WBS) for the Payload Specialist Station (PSS) is presented. The WBS is divided into two elements--PSS contractor and mission unique requirements. In accordance with the study ground rules, it is assumed that a single contractor, hereafter referred to as PSS Contractor will perform the following: (1) provide C and D hardware (MFDS and elements of MMSE), except for GFE; (2) identify software requirements; (3) provide GSE and ground test software; and (4) perform systems engineering and integration in support of the Aft Flight Deck (AFD) C and D concept. The PSS Contractor WBS element encompasses a core or standardized PSS concept. Payload peculiar C and D requirements identified by users will originate as a part of the WBS element mission unique requirements; these requirements will be provided to the PSS Contractor for implementation.

Application of instant messaging software in the follow-up of patients using peritoneal dialysis, a randomised controlled trial.

PubMed

Cao, Fang; Li, Lanfei; Lin, Miao; Lin, Qinyu; Ruan, Yiping; Hong, Fuyuan

2018-04-20

This study aims to investigate the application value of Internet-based instant messaging software in the follow-up of patients using peritoneal dialysis. Peritoneal dialysis is an effective renal replacement treatment for end-stage renal disease. The clinical usefulness of Internet-based instant messaging software in the follow-up of peritoneal dialysis patients, including the incidence of peritonitis and exit-site infection, the levels of albumin and electrolytes and the degree of patients' satisfaction, remains unknown. Between January 2009-April 2016, a total of 160 patients underwent continuous peritoneal dialysis in the Department of Nephrology, Fujian Provincial Hospital were invited to participate voluntarily in this study. The patients were randomly assigned to the instant messenger (QQ) follow-up group (n = 80) and the traditional follow-up group (n = 80). The differences in death, hospitalisation, peritonitis, exit-site infection, and patients' satisfaction were investigated during 1 year of follow-up. The mean follow-up duration is 11.4 ± 1.5 months. Compared with the patients in the traditional follow-up group, patients in the QQ follow-up group showed higher levels of serum albumin (p = .009) and haemoglobin (p = .009), lower levels of phosphorus (p < .001) and calcium-phosphorus product (p = .001), and better degree of satisfaction (p < .001). Internet-based follow-up by instant messaging software appears to be a feasible and acceptable method of delivering peritoneal dialysis treatment for patients with end-stage renal disease. © 2018 John Wiley & Sons Ltd.

Frequencies of CYP2C9 polymorphisms in North Indian population and their association with drug levels in children on phenytoin monotherapy.

PubMed

Chaudhary, Nagendra; Kabra, Madhulika; Gulati, Sheffali; Gupta, Yogendra Kumar; Pandey, Ravindra Mohan; Bhatia, Bal Dev

2016-05-14

Phenytoin, mainly metabolized by cytochrome P450 enzyme system, has a narrow therapeutic index and may have adverse effects due to inter-individual variation in the dose requirement and genetic polymorphisms. This cross-sectional study was done to study the prevalence of cytochrome P450 CYP2C9 polymorphisms in Indian epileptic children and to see the effect of polymorphisms on serum levels in epileptic children on phenytoin monotherapy. We studied 89 epileptic children of North Indian population, randomly selected, to see the genotypic and allelic frequency of CYP2C9 and its association with drug levels on phenytoin monotherapy. Analysis was done using STATA 9 Software. The results were analyzed as prevalence at 95 % C.I. (Confidence Interval). The difference in mean phenytoin serum levels between wild and mutant alleles was tested using Student`s T test for independent samples. P value less than 0.05 was considered statistically significant. CYP2C9*1, *2 & *3 allelic frequencies were 85.4, 4.5 and 10.1 % respectively. CYP2C9*3 allelic group showed significantly higher serum phenytoin levels compared to the wild variants (P = 0.009). There was no statistically significant difference in the dose received (P = 0.12) and side effects of CYP2C9*2 and CYP2C9*3 genotypes (P = 0.442 and 0.597 respectively) when compared with wild variant. CYP2C9*3 is more common than *2 in the present study. All the polymorphisms demonstrated in our study were heterozygous with no homozygosity. Serum phenytoin levels are higher in polymorphic groups (*3) which suggest their poor metabolizing nature. Genotyping may help to avoid toxicity and concentration-dependent adverse effects.

Apolipoprotein A5 and apolipoprotein C3 single nucleotide polymorphisms are correlated with an increased risk of coronary heart disease: a case-control and meta-analysis study.

PubMed

Yang, Guang; Lei, Ming-Ming; Yu, Chun-Lei; Liu, Xiao-Xiao; An, Zhe; Song, Chun-Li

2015-09-19

Triglycerides (TGs) are proatherogenic lipoproteins involving the risk of coronary heart disease (CHD), while apolipoprotein A5 (APOA5) and apolipoprotein C3 (APOC3) are main lipoproteins composing TG-rich lipoproteins. In this study, we aim to explore the correlation of CHD with APOA5 -1131 T > C and APOC3 -455 T > C single nucleotide polymorphisms (SNPs). A sum of 210 CHD patients, hospitalized between Jan. 2013 and Mar. 2015 at China-Japan Union Hospital, Jilin University, were selected as our case group and 223 healthy individuals who had physical examination at same hospital at the same period were selected as control group. The frequency distribution of genotypes of APOA5 -1131 T > C and APOC3 -455 T > C SNPs were measured by polymerase chain reaction-restriction fragment length polymorphism (PCR-RFLP). The Stata 12.0 software was utilized for statistical analyses. There was no significant difference on age and sex between case and control group (P > 0.05). History of smoking, drinking, hypertension and diabetes mellitus, body mass index and levels of TG and fasting blood sugar in case group were shown to be higher than control group (P < 0.05), while levels of total cholesterol, high-density lipoprotein cholesterol and low-density lipoprotein cholesterol in case group were lower than control group (P < 0.05). Both CC and TC' + CC frequencies of APOA5 -1131 T > C and APOC3 -455 T > C in case group were higher compared to control group (both P < 0.05). Additionally, T allele frequencies of the two SNPs in case group were lower than control group, while C allele in case group has higher frequencies compared to control group (both P < 0.05). The results of meta-analysis under allele and dominant models showed that APOA5 -1131 T > C and APOC3 -455 T > C SNPs are likely to increase the risk of CHD (both P < 0.05). APOA5 -1131 T > C and APOC3 -455 T > C SNPs may play potent roles in the development and progression of CHD.

Disease spectrum of abnormal serum free light chain ratio and its diagnostic significance

PubMed Central

Xu, Bin; Tang, Yi; Zhou, Jianfeng; Zhang, Peiling; Li, Huijun

2017-01-01

Objective To analyze the spectrum of abnormal serum free light chain ratio (sFLC κ/λ ratio), and to redefine the range of sFLC κ/λ ratio, so as to achieve hierarchical diagnosis of diseases with abnormal sFLC κ/λ ratio, resulting in the increased sensitivity and specificity in the diagnosis of monoclonal plasma diseases. Methods Enrolled 1,340 patients with abnormal sFLC κ/λ ratio (<0.26 or >1.65) were grouped: (1) group A: malignant plasma diseases; (2) group B: monoclonal gammopathies of undetermined significance (MGUS); (3) group C: reactive plasma diseases. These patients were further divided by renal function eGFR <60 or >60 ml/min/1.73m2 to eliminate renal diseases influencing the results. Statistical analyses was performed by using SPSS 22 software. Results When sFLC κ/λ ratio >3.49 and eGFR >60ml/min/1.73m2, the sensitivity and specificity of the diagnosis of malignant plasma diseases were 86.1% and 94.0%, respectively. When sFLC κ/λ ratio >2.89 and eGFR <60ml/min/1.73m2, the sensitivity and specificity of the diagnosis of malignant plasma diseases were 92.0% and 97.0%, respectively. Conclusion The sensitivity and specificity of the diagnosis of monoclonal plasma diseases can be significantly improved by redefining the cut-off value of sFLC κ/λ ratio and the renal function index of eGFR. PMID:29137262

FIRRE command and control station (C2)

NASA Astrophysics Data System (ADS)

Laird, R. T.; Kramer, T. A.; Cruickshanks, J. R.; Curd, K. M.; Thomas, K. M.; Moneyhun, J.

2006-05-01

The Family of Integrated Rapid Response Equipment (FIRRE) is an advanced technology demonstration program intended to develop a family of affordable, scalable, modular, and logistically supportable unmanned systems to meet urgent operational force protection needs and requirements worldwide. The near-term goal is to provide the best available unmanned ground systems to the warfighter in Iraq and Afghanistan. The overarching long-term goal is to develop a fully-integrated, layered force protection system of systems for our forward deployed forces that is networked with the future force C4ISR systems architecture. The intent of the FIRRE program is to reduce manpower requirements, enhance force protection capabilities, and reduce casualties through the use of unmanned systems. FIRRE is sponsored by the Office of the Under Secretary of Defense, Acquisitions, Technology and Logistics (OUSD AT&L), and is managed by the Product Manager, Force Protection Systems (PM-FPS). The FIRRE Command and Control (C2) Station supports two operators, hosts the Joint Battlespace Command and Control Software for Manned and Unmanned Assets (JBC2S), and will be able to host Mission Planning and Rehearsal (MPR) software. The C2 Station consists of an M1152 HMMWV fitted with an S-788 TYPE I shelter. The C2 Station employs five 24" LCD monitors for display of JBC2S software [1], MPR software, and live video feeds from unmanned systems. An audio distribution system allows each operator to select between various audio sources including: AN/PRC-117F tactical radio (SINCGARS compatible), audio prompts from JBC2S software, audio from unmanned systems, audio from other operators, and audio from external sources such as an intercom in an adjacent Tactical Operations Center (TOC). A power distribution system provides battery backup for momentary outages. The Ethernet network, audio distribution system, and audio/video feeds are available for use outside the C2 Station.

System Framework for a Multi-Band, Multi-Mode Software Defined Radio

DTIC Science & Technology

2014-06-01

detection, while the VITA Radio Transport ( VRT ) protocol over Gigabit Ethernet (GIGE) is implemented for the data interface. In addition to the SoC...CTRL VGA CTRL C2 GPP C2 CORE SW ARM0 RX SYN CTRL PL MEMORY MAP DR CTRL GENERIC INTERRUPT CONTROLLER DR GPP VITERBI ALGORITHM & VRT INTERFACE ARM1

SMS crew station (C and D panels and forward structures). CEI part 1: Detail specification, type 1 data

NASA Technical Reports Server (NTRS)

1976-01-01

Established are the requirements for performance, design, test and qualification of one type of equipment identified as SMS C&D panels and forward structures. This CEI is used to provide all hardware and wiring necessary for the C&D panels to be properly interfaced with the computer complex/signal conversion equipment (SCE), crew station, and software requirements as defined in other CEI specifications.

4D-CT scans reveal reduced magnitude of respiratory liver motion achieved by different abdominal compression plate positions in patients with intrahepatic tumors undergoing helical tomotherapy

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hu, Yong, E-mail: hu.yong@zs-hospital.sh.cn; Zhou,

Purpose: While abdominal compression (AC) can be used to reduce respiratory liver motion in patients receiving helical tomotherapy for hepatocellular carcinoma, the nature and extent of this effect is not well described. The purpose of this study was to evaluate the changes in magnitude of three-dimensional liver motion with abdominal compression using four-dimensional (4D) computed tomography (CT) images of several plate positions. Methods: From January 2012 to October 2015, 72 patients with intrahepatic carcinoma and divided into four groups underwent 4D-CT scans to assess respiratory liver motion. Of the 72 patients, 19 underwent abdominal compression of the cephalic area betweenmore » the subxiphoid and umbilicus (group A), 16 underwent abdominal compression of the caudal region between the subxiphoid area and the umbilicus (group B), 11 patients underwent abdominal compression of the caudal umbilicus (group C), and 26 patients remained free breathing (group D). 4D-CT images were sorted into ten-image series, according to the respiratory phase from the end inspiration to the end expiration, and then transferred to treatment planning software. All liver contours were drawn by a single physician and confirmed by a second physician. Liver relative coordinates were automatically generated to calculate the liver respiratory motion in different axial directions to compile the 10 ten contours into a single composite image. Differences in respiratory liver motion were assessed with a one-way analysis of variance test of significance. Results: The average respiratory liver motion in the Y axial direction was 4.53 ± 1.16, 7.56 ± 1.30, 9.95 ± 2.32, and 9.53 ± 2.62 mm in groups A, B, C, and D, respectively, with a significant change among the four groups (p < 0.001). Abdominal compression was most effective in group A (compression plate on the subxiphoid area), with liver displacement being 2.53 ± 0.93, 4.53 ± 1.16, and 2.14 ± 0.92 mm on the X-, Y-, and Z-axes, respectively. There was no significant difference in respiratory liver motion between group C (displacement: 3.23 ± 1.47, 9.95 ± 2.32, and 2.92 ± 1.10 mm on the X-, Y-, and Z-axes, respectively) and group D (displacement: 3.35 ± 1.55, 9.53 ± 2.62, and 3.35 ± 1.73 mm on the X-, Y-, and Z-axes, respectively). Abdominal compression was least effective in group C (compression on caudal umbilicus), with liver motion in this group similar to that of free-breathing patients (group D). Conclusions: 4D-CT scans revealed significant liver motion control via abdominal compression of the subxiphoid area; however, this control of liver motion was not observed with compression of the caudal umbilicus. The authors, therefore, recommend compression of the subxiphoid area in patients undergoing external radiotherapy for intrahepatic carcinoma.« less

The efficacy of attendance and semi-attendance group cognitive-behavioral therapy (CBT) on the anxiety disorders of adolescent girls.

PubMed

Karbasi, Afsaneh; Arman, Soroor; Maracy, Mohamad Reza

2010-09-01

Anxiety disorders are one of the most psychiatric disorders in children and adolescents that can cause long life functional disability. The first line treatment for this disorder is cognitive behavioral therapy that has primary, secondary and tertiary preventive effect, but is expensive and long time. Today there is some effort to find short term, group, semi-attendance and low cost therapies. Subjects were 42 girls (12- 17 y) with at least one anxiety disorder according to DSM-IV-TR with their parents who were divided into two groups randomly: group A which participated in 8 sessions and group B which participated in 4 sessions and the contents of sessions 3, 4, 6, and 7 were recorded on a CD for them. The tests used in this study were: SCARED, CATS, CAIS-C, CAIS-P, conducted before (T0), just after (T1) and three months after the treatment (T2). The collected data were analyzed by multivariate analysis of covariance test using SPSS software package, version 15.0. There was no significant difference between efficacy of semi-attendance group CBT and attendance group CBT in T0, T1 and T2 according to 4 tests (p = 0.311). The difference between the scores of these tests between T0 andT1 and T0 and T2 was significant in both groups (p < 0.001) but the difference between T1 and T2 was not significant. (p = 0.771). The efficacy of semi-attendance group CBT and attendance group CBT is similar and would sustain after 3 months.

The efficacy of attendance and semi-attendance group cognitive-behavioral therapy (CBT) on the anxiety disorders of adolescent girls

PubMed Central

Karbasi, Afsaneh; Arman, Soroor; Maracy, Mohamad Reza

2010-01-01

BACKGROUND: Anxiety disorders are one of the most psychiatric disorders in children and adolescents that can cause long life functional disability. The first line treatment for this disorder is cognitive behavioral therapy that has primary, secondary and tertiary preventive effect, but is expensive and long time. Today there is some effort to find short term, group, semi-attendance and low cost therapies. METHODS: Subjects were 42 girls (12- 17 y) with at least one anxiety disorder according to DSM-IV-TR with their parents who were divided into two groups randomly: group A which participated in 8 sessions and group B which participated in 4 sessions and the contents of sessions 3, 4, 6, and 7 were recorded on a CD for them. The tests used in this study were: SCARED, CATS, CAIS-C, CAIS-P, conducted before (T0), just after (T1) and three months after the treatment (T2). The collected data were analyzed by multivariate analysis of covariance test using SPSS software package, version 15.0. RESULTS: There was no significant difference between efficacy of semi-attendance group CBT and attendance group CBT in T0, T1 and T2 according to 4 tests (p = 0.311). The difference between the scores of these tests between T0 andT1 and T0 and T2 was significant in both groups (p < 0.001) but the difference between T1 and T2 was not significant. (p = 0.771). CONCLUSIONS: The efficacy of semi-attendance group CBT and attendance group CBT is similar and would sustain after 3 months. PMID:21526093

Absolute myocardial flow quantification with (82)Rb PET/CT: comparison of different software packages and methods.

PubMed

Tahari, Abdel K; Lee, Andy; Rajaram, Mahadevan; Fukushima, Kenji; Lodge, Martin A; Lee, Benjamin C; Ficaro, Edward P; Nekolla, Stephan; Klein, Ran; deKemp, Robert A; Wahl, Richard L; Bengel, Frank M; Bravo, Paco E

2014-01-01

In clinical cardiac (82)Rb PET, globally impaired coronary flow reserve (CFR) is a relevant marker for predicting short-term cardiovascular events. However, there are limited data on the impact of different software and methods for estimation of myocardial blood flow (MBF) and CFR. Our objective was to compare quantitative results obtained from previously validated software tools. We retrospectively analyzed cardiac (82)Rb PET/CT data from 25 subjects (group 1, 62 ± 11 years) with low-to-intermediate probability of coronary artery disease (CAD) and 26 patients (group 2, 57 ± 10 years; P=0.07) with known CAD. Resting and vasodilator-stress MBF and CFR were derived using three software applications: (1) Corridor4DM (4DM) based on factor analysis (FA) and kinetic modeling, (2) 4DM based on region-of-interest (ROI) and kinetic modeling, (3) MunichHeart (MH), which uses a simplified ROI-based retention model approach, and (4) FlowQuant (FQ) based on ROI and compartmental modeling with constant distribution volume. Resting and stress MBF values (in milliliters per minute per gram) derived using the different methods were significantly different: using 4DM-FA, 4DM-ROI, FQ, and MH resting MBF values were 1.47 ± 0.59, 1.16 ± 0.51, 0.91 ± 0.39, and 0.90 ± 0.44, respectively (P<0.001), and stress MBF values were 3.05 ± 1.66, 2.26 ± 1.01, 1.90 ± 0.82, and 1.83 ± 0.81, respectively (P<0.001). However, there were no statistically significant differences among the CFR values (2.15 ± 1.08, 2.05 ± 0.83, 2.23 ± 0.89, and 2.21 ± 0.90, respectively; P=0.17). Regional MBF and CFR according to vascular territories showed similar results. Linear correlation coefficient for global CFR varied between 0.71 (MH vs. 4DM-ROI) and 0.90 (FQ vs. 4DM-ROI). Using a cut-off value of 2.0 for abnormal CFR, the agreement among the software programs ranged between 76 % (MH vs. FQ) and 90 % (FQ vs. 4DM-ROI). Interobserver agreement was in general excellent with all software packages. Quantitative assessment of resting and stress MBF with (82)Rb PET is dependent on the software and methods used, whereas CFR appears to be more comparable. Follow-up and treatment assessment should be done with the same software and method.

[Effect of oral intervention on matrix metalloproteinase-2, 9 expression in carotid arteries and serum interleukin-6 in rats with chronic periodontitis].

PubMed

Li, Jieting; Liu, Yujiao; Ren, Xiuyun; Chang, Le; Yue, Zijie; Shi, Xuexue

2014-09-01

To establish chronic periodontitis model in SD rats, and to investigate the effect of oral intervention on atherosclerosis. Fifty male SD rats were randomly divided into three groups, group A (normal control), group B (atherosclerosis,As) and group C (chronic periodontitis, CP). Group C was further divided into group C1 (natural process), group C2 (simple mechanical treatment), group C3 (systemic antibiotics), group C4-1 (teeth extraction) and group C4-2 (teeth extraction+systemic antibiotics), each group consisted of 7 rats. Every group received oral intervention. Serum interleukin (IL)- 6 levels were detected in five different time points (1, 3, 5, 7, 9 weeks after a successful modeling) by enzyme linked immunosorbent assay. All animals were killed after 24 weeks. Matrix metalloproteinase (MMP)- 2, 9 in the proximal aorta was detected by immuno histochemistry. The levels of serum IL-6 in groups B and C1 increased gradually with time and became significantly higher than that in group A (P < 0.01). Levels of serum IL-6 were increased gradually in each intervention group (C2, C3, C4-1, C4-2) and reached its peak at 5 weeks after modeling [C2:(62.3 ± 14.3) ng/L, C3:(58.2 ± 8.7) ng/L, C4-1:(127.0 ± 29.9) ng/L, C4-2:(120.6 ± 23.1) ng/L]. Compared with group B, group C4- 1 and C4- 2 increased most significantly (P < 0.01). Levels of serum IL- 6 decreased gradually. Eventually, group C2 [(28.6 ± 8.1) ng/L], C3 [(40.8 ± 15.1) ng/L] and C4-2 [(32.7 ± 11.1) ng/L] were significantly lower than group B (P < 0.05), and in group C2 IL- 6 was the lowest. Although levels of serum of IL-6 significantly decreased in group C4-1 [(72.8 ± 16.4) ng/L], but remained the highest. Immunohistochemistry showed that MMP-2, 9 were expressed in group B, C1 and C4-1, and significantly higher than in group A (183.0 ± 2.0, 181.3 ± 2.0), the gray value differences were statistically significant (P < 0.01). Group C4-1 (123.1 ± 2.9, 121.0 ± 3.2) was the strongest, group B (126.4 ± 2.0, 124.8 ± 2.8) and C1 (140.0 ± 2.2, 139.7 ± 3.2) were decreased (P < 0.01). While group C2(169.3 ± 3.4, 169.7 ± 2.3), C3 (149.0 ± 1.7, 145.1 ± 2.5) and C4-2 (157.7 ± 1.2, 155.8 ± 2.7) were significantly lower than group C1 (P < 0.01), and group C2 was close to normal. Periodontitis could increase the risk of atherosclerosis in rats with chronic periodontitis. Periodontal mechanical treatment and teeth extraction may increase the risk of As in the short time. However, the risk would gradually reduce in a long time.

Certification of Safety-Critical Software Under DO-178C and DO-278A

NASA Technical Reports Server (NTRS)

Jacklin, Stephen A.

2012-01-01

The RTCA has recently released DO-178C and DO-278A as new certification guidance for the production of airborne and ground-based air traffic management software, respectively. Additionally, RTCA special committee SC-205 has also produced, at the same time, five other companion documents. These documents are RTCA DO-248C, DO-330, DO-331, DO- 332, and DO-333. These supplements address frequently asked questions about software certification, provide guidance on tool qualification requirements, and illustrate the modifications recommended to DO-178C when using model-based software design, object oriented programming, and formal methods. The objective of this paper is to first explain the relationship of DO-178C to the former DO-178B in order to give those familiar with DO- 178B an indication of what has been changed and what has not been changed. With this background, the relationship of DO-178C and DO-278 to the new DO-278A document for ground-based software development is shown. Last, an overview of the new guidance contained in the tool qualification document and the three new supplements to DO-178C and DO-278A is presented. For those unfamiliar with DO-178B, this paper serves to provide an entry point to this new certification guidance for airborne and ground-based CNS/ATM software certification.

Validating the Effectiveness of Switching the Vancomycin TDM Analysis Software Based on the Predictive Accuracy.

PubMed

Imai, Shungo; Yamada, Takehiro; Ishiguro, Nobuhisa; Miyamoto, Takenori; Kagami, Keisuke; Tomiyama, Naoki; Niinuma, Yusuke; Nagasaki, Daisuke; Suzuki, Koji; Yamagami, Akira; Kasashi, Kumiko; Kobayashi, Masaki; Iseki, Ken

2017-01-01

Based on the predictive performance in our previous study, we switched the therapeutic drug monitoring (TDM) analysis software for dose setting of vancomycin (VCM) from "Vancomycin MEEK TDM analysis software Ver2.0" (MEEK) to "SHIONOGI-VCM-TDM ver.2009" (VCM-TDM) in January 2015. In the present study, our aim was to validate the effectiveness of the changing VCM TDM analysis software in initial dose setting of VCM. The enrolled patients were divided into two groups, each having 162 patients in total, who received VCM with the initial dose set using MEEK (MEEK group) or VCM-TDM (VCM-TDM group). We compared the rates of attaining the therapeutic range (trough value; 10-20 μg/mL) of serum VCM concentration between the groups. Multivariate logistic regression analysis was performed to confirm that changing the VCM TDM analysis software was an independent factor related to attaining the therapeutic range. Switching the VCM TDM analysis software from MEEK to VCM-TDM improved the rate of attaining the therapeutic range by 21.6% (MEEK group: 42.6% vs. VCM-TDM group: 64.2%, p<0.01). Patient age ≥65 years, concomitant medication (furosemide) and the TDM analysis software used VCM-TDM were considered to be independent factors for attaining the therapeutic range. These results demonstrated the effectiveness of switching the VCM TDM analysis software from MEEK to VCM-TDM for initial dose setting of VCM.

Critical Design Decisions of The Planck LFI Level 1 Software

NASA Astrophysics Data System (ADS)

Morisset, N.; Rohlfs, R.; Türler, M.; Meharga, M.; Binko, P.; Beck, M.; Frailis, M.; Zacchei, A.

2010-12-01

The PLANCK satellite with two on-board instruments, a Low Frequency Instrument (LFI) and a High Frequency Instrument (HFI) has been launched on May 14th with Ariane 5. The ISDC Data Centre for Astrophysics in Versoix, Switzerland has developed and maintains the Planck LFI Level 1 software for the Data Processing Centre (DPC) in Trieste, Italy. The main tasks of the Level 1 processing are to retrieve the daily available scientific and housekeeping (HK) data of the LFI instrument, the Sorption Cooler and the 4k Cooler data from Mission Operation Centre (MOC) in Darmstadt; to sort them by time and by type (detector, observing mode, etc...); to extract the spacecraft attitude information from auxiliary files; to flag the data according to several criteria; and to archive the resulting Time Ordered Information (TOI), which will then be used to produce maps of the sky in different spectral bands. The output of the Level 1 software are the TOI files in FITS format, later ingested into the Data Management Component (DMC) database. This software has been used during different phases of the LFI instrument development. We started to reuse some ISDC components for the LFI Qualification Model (QM) and we completely rework the software for the Flight Model (FM). This was motivated by critical design decisions taken jointly with the DPC. The main questions were: a) the choice of the data format: FITS or DMC? b) the design of the pipelines: use of the Planck Process Coordinator (ProC) or a simple Perl script? c) do we adapt the existing QM software or do we restart from scratch? The timeline and available manpower are also important issues to be taken into account. We present here the orientation of our choices and discuss their pertinence based on the experience of the final pre-launch tests and the start of real Planck LFI operations.

[AMD Annals: a model of continuous monitoring and improvement of the quality of diabetes care].

PubMed

2011-01-01

in recent years, several initiatives have been launched by the Associazione medici diabetologi (AMD) in the context of a national quality improvement program.These activities include: identification of specific indicators of quality of diabetes care, development of a software to calculate such indicators by using routine clinical data, creation of a network of diabetes clinics and analysis and publication of the results in ad hoc reports (AMD Annals). Through the best performer approach, each centre could compare its own performance not only with the theoretical targets suggested by existing guidelines, but also with the results achieved by the best centres operating within the same healthcare system.We evaluated whether the involvement of diabetes clinics into the AMD Annals initiative improved the quality of care over 4 years. a controlled before and after study was performed to compare data collected from 2004 to 2007 by two groups of centres: group A included centres that had been involved in the project since the first edition of AMD Annals; group B included centres only involved in the last edition. overall, 124 diabetes clinics provided data on over 100,000 type 2 diabetes patients/year seen from 2004 to 2007. process indicators included the proportion of patients with at least one measurement of HbA1c, blood pressure and lipid profile during the previous 12 months. Intermediate outcomes included percentages of patients with levels of HbA1c ≤ 7%, blood pressure ≤ 130/85 mmHg and LDL-cholesterol <100 mg/dl (favourable indicators), and the percentages of patients with levels of HbA1c ≥ 9%, blood pressure ≥ 140/90 mmHg and LDL-cholesterol ≥ 130 mg/dl (unfavourable indicators). Percentages of patients treated with insulin, two or more antihypertensive agents, and statins were also evaluated. A multilevel analysis adjusted for age, gender, diabetes duration, and clustering effect was applied to investigate the changes in the indicators between the two groups of centres during 4 years. lipid profile monitoring increased more in group A (+6.2% from 2004 to 2007) than in group B (+2.4%), while HbA1c and blood pressure monitoring did not change over time in both groups. As for the outcomes considered, the percentage of patients with HbA1c ≤ 7% increased by 6% in group A and by 1.3%in group B, while the proportion of patients achieving the blood pressure target increased in group A (+6.4%), but not in group B (-1.4%). A reduction in the percentage of patients with blood pressure ≥ 140/90 mmHg was found in group A (-7.3%) but not in group B (-0.9%). Marked improvements in the proportion of patients with LDL-cholesterol at target were documented in both groups (group A: +10.5%; group B: +12.2%.) The proportion of patients treated with insulin increased in group A only (+5.8%), while the use of statins grew by 20%in both groups.The proportion of individuals treated with two or more antihypertensive drugs increased by 3.6% in group A and by 1.6% in group B. the AMD Annals approach can be considered as a case model for quality improvement activities in chronic diseases and a tool to evaluate the level of adoption/acceptance of guidelines in clinical practice. The considerable success documented was obtained without allocation of extra resources or financial incentives but simply through a physician-led effort made possible by the commitment of the specialists involved.

Natural Computing: Its Impact on Software Development

DTIC Science & Technology

2000-02-01

liars) Hanieuually ------. - ------ hadirline and single 1________N *ha c ea I coal C.oke loand . SIt thtan I other 0 Boxohead cutoff rule...user can develop new proce- dures by copying objects from documents and connecting them. These procedures can be saved for future use. Figure 27 shows

Aviation Environmental Design Tool (AEDT): Version 2c Service pack 1: AEDT Standard Input File (ASIF) Reference Guide

DOT National Transportation Integrated Search

2016-12-01

The Federal Aviation Administration, Office of Environment and Energy (FAA-AEE) has developed the Aviation Environmental Design Tool (AEDT) version 2c software system with the support of the following development team: FAA, National Aeronautics and S...

Characterizing the Severity of Autonomic Cardiovascular Dysfunction after Spinal Cord Injury Using a Novel 24 Hour Ambulatory Blood Pressure Analysis Software.

PubMed

Popok, David W; West, Christopher R; Hubli, Michele; Currie, Katharine D; Krassioukov, Andrei V

2017-02-01

Cardiovascular disease is one of the leading causes of morbidity and mortality in the spinal cord injury (SCI) population. SCI may disrupt autonomic cardiovascular homeostasis, which can lead to persistent hypotension, irregular diurnal rhythmicity, and the development of autonomic dysreflexia (AD). There is currently no software available to perform automated detection and evaluation of cardiovascular autonomic dysfunction(s) such as those generated from 24 h ambulatory blood pressure monitoring (ABPM) recordings in the clinical setting. The objective of this study is to compare the efficacy of a novel 24 h ABPM Autonomic Dysfunction Detection Software against manual detection and to use the software to demonstrate the relationships between level of injury and the degree of autonomic cardiovascular impairment in a large cohort of individuals with SCI. A total of 46 individuals with cervical (group 1, n = 37) or high thoracic (group 2, n = 9) SCI participated in the study. Outcome measures included the frequency and severity of AD, frequency of hypotensive events, and diurnal variations in blood pressure and heart rate. There was good agreement between the software and manual detection of AD events (Bland-Altman limits of agreement = ±1.458 events). Cervical SCI presented with more frequent (p = 0.0043) and severe AD (p = 0.0343) than did high thoracic SCI. Cervical SCI exhibited higher systolic and diastolic blood pressure during the night and lower heart rate during the day than high thoracic SCI. In conclusion, our ABPM AD Detection Software was equally as effective in detecting the frequency and severity of AD and hypotensive events as manual detection, suggesting that this software can be used in the clinical setting to expedite ABPM analyses.

Experiences Supporting the Lunar Reconnaissance Orbiter Camera: the Devops Model

NASA Astrophysics Data System (ADS)

Licht, A.; Estes, N. M.; Bowman-Cisnesros, E.; Hanger, C. D.

2013-12-01

Introduction: The Lunar Reconnaissance Orbiter Camera (LROC) Science Operations Center (SOC) is responsible for instrument targeting, product processing, and archiving [1]. The LROC SOC maintains over 1,000,000 observations with over 300 TB of released data. Processing challenges compound with the acquisition of over 400 Gbits of observations daily creating the need for a robust, efficient, and reliable suite of specialized software. Development Environment: The LROC SOC's software development methodology has evolved over time. Today, the development team operates in close cooperation with the systems administration team in a model known in the IT industry as DevOps. The DevOps model enables a highly productive development environment that facilitates accomplishment of key goals within tight schedules[2]. The LROC SOC DevOps model incorporates industry best practices including prototyping, continuous integration, unit testing, code coverage analysis, version control, and utilizing existing open source software. Scientists and researchers at LROC often prototype algorithms and scripts in a high-level language such as MATLAB or IDL. After the prototype is functionally complete the solution is implemented as production ready software by the developers. Following this process ensures that all controls and requirements set by the LROC SOC DevOps team are met. The LROC SOC also strives to enhance the efficiency of the operations staff by way of weekly presentations and informal mentoring. Many small scripting tasks are assigned to the cognizant operations personnel (end users), allowing for the DevOps team to focus on more complex and mission critical tasks. In addition to leveraging open source software the LROC SOC has also contributed to the open source community by releasing Lunaserv [3]. Findings: The DevOps software model very efficiently provides smooth software releases and maintains team momentum. Scientists prototyping their work has proven to be very efficient as developers do not need to spend time iterating over small changes. Instead, these changes are realized in early prototypes and implemented before the task is seen by developers. The development practices followed by the LROC SOC DevOps team help facilitate a high level of software quality that is necessary for LROC SOC operations. Application to the Scientific Community: There is no replacement for having software developed by professional developers. While it is beneficial for scientists to write software, this activity should be seen as prototyping, which is then made production ready by professional developers. When constructed properly, even a small development team has the ability to increase the rate of software development for a research group while creating more efficient, reliable, and maintainable products. This strategy allows scientists to accomplish more, focusing on teamwork, rather than software development, which may not be their primary focus. 1. Robinson et al. (2010) Space Sci. Rev. 150, 81-124 2. DeGrandis. (2011) Cutter IT Journal. Vol 24, No. 8, 34-39 3. Estes, N.M.; Hanger, C.D.; Licht, A.A.; Bowman-Cisneros, E.; Lunaserv Web Map Service: History, Implementation Details, Development, and Uses, http://adsabs.harvard.edu/abs/2013LPICo1719.2609E.

In Vitro Implant Impression Accuracy Using a New Photopolymerizing SDR Splinting Material.

PubMed

Di Fiore, Adolfo; Meneghello, Roberto; Savio, Gianpaolo; Sivolella, Stefano; Katsoulis, Joannis; Stellini, Edoardo

2015-10-01

The study aims to evaluate three-dimensionally (3D) the accuracy of implant impressions using a new resin splinting material, "Smart Dentin Replacement" (SDR). A titanium model of an edentulous mandible with six implant analogues was used as a master model and its dimensions measured with a coordinate measuring machine. Before the total 60 impressions were taken (open tray, screw-retained abutments, vinyl polysiloxane), they were divided in four groups: A (test): copings pick-up splinted with dental floss and fotopolymerizing SDR; B (test): see A, additionally sectioned and splinted again with SDR; C (control): copings pick-up splinted with dental floss and autopolymerizing Duralay® (Reliance Dental Mfg. Co., Alsip, IL, USA) acrylic resin; and D (control): see C, additionally sectioned and splinted again with Duralay. The impressions were measured directly with an optomechanical coordinate measuring machine and analyzed with a computer-aided design (CAD) geometric modeling software. The Wilcoxon matched-pair signed-rank test was used to compare groups. While there was no difference (p = .430) between the mean 3D deviations of the test groups A (17.5 μm) and B (17.4 μm), they both showed statistically significant differences (p < .003) compared with both control groups (C 25.0 μm, D 19.1 μm). Conventional impression techniques for edentulous jaws with multiple implants are highly accurate using the new fotopolymerizing splinting material SDR. Sectioning and rejoining of the SDR splinting had no impact on the impression accuracy. © 2015 Wiley Periodicals, Inc.

Software architecture of the III/FBI segment of the FBI's integrated automated identification system

NASA Astrophysics Data System (ADS)

Booker, Brian T.

1997-02-01

This paper will describe the software architecture of the Interstate Identification Index (III/FBI) Segment of the FBI's Integrated Automated Fingerprint Identification System (IAFIS). IAFIS is currently under development, with deployment to begin in 1998. III/FBI will provide the repository of criminal history and photographs for criminal subjects, as well as identification data for military and civilian federal employees. Services provided by III/FBI include maintenance of the criminal and civil data, subject search of the criminal and civil data, and response generation services for IAFIS. III/FBI software will be comprised of both COTS and an estimated 250,000 lines of developed C code. This paper will describe the following: (1) the high-level requirements of the III/FBI software; (2) the decomposition of the III/FBI software into Computer Software Configuration Items (CSCIs); (3) the top-level design of the III/FBI CSCIs; and (4) the relationships among the developed CSCIs and the COTS products that will comprise the III/FBI software.

Comparison of the Effectiveness of Stylewriter and Microsoft Word Computer Software to Improve English Writing Skills

ERIC Educational Resources Information Center

Prvinchandar, Sunita; Ayub, Ahmad Fauzi Mohd

2014-01-01

This study compared the effectiveness of two types of computer software for improving the English writing skills of pupils in a Malaysian primary school. Sixty students who participated in the seven-week training course were divided into two groups, with the experimental group using the StyleWriter software and the control group using the…

Descent and Landing Triggers for the Orion Multi-Purpose Crew Vehicle Exploration Flight Test-1

NASA Technical Reports Server (NTRS)

Bihari, Brian D.; Semrau, Jeffrey D.; Duke, Charity J.

2013-01-01

The Orion Multi-Purpose Crew Vehicle (MPCV) will perform a flight test known as Exploration Flight Test-1 (EFT-1) currently scheduled for 2014. One of the primary functions of this test is to exercise all of the important Guidance, Navigation, Control (GN&C), and Propulsion systems, along with the flight software for future flights. The Descent and Landing segment of the flight is governed by the requirements levied on the GN&C system by the Landing and Recovery System (LRS). The LRS is a complex system of parachutes and flight control modes that ensure that the Orion MPCV safely lands at its designated target in the Pacific Ocean. The Descent and Landing segment begins with the jettisoning of the Forward Bay Cover and concludes with sensing touchdown. This paper discusses the requirements, design, testing, analysis and performance of the current EFT-1 Descent and Landing Triggers flight software.

Object oriented development of engineering software using CLIPS

NASA Technical Reports Server (NTRS)

Yoon, C. John

1991-01-01

Engineering applications involve numeric complexity and manipulations of a large amount of data. Traditionally, numeric computation has been the concern in developing an engineering software. As engineering application software became larger and more complex, management of resources such as data, rather than the numeric complexity, has become the major software design problem. Object oriented design and implementation methodologies can improve the reliability, flexibility, and maintainability of the resulting software; however, some tasks are better solved with the traditional procedural paradigm. The C Language Integrated Production System (CLIPS), with deffunction and defgeneric constructs, supports the procedural paradigm. The natural blending of object oriented and procedural paradigms has been cited as the reason for the popularity of the C++ language. The CLIPS Object Oriented Language's (COOL) object oriented features are more versatile than C++'s. A software design methodology based on object oriented and procedural approaches appropriate for engineering software, and to be implemented in CLIPS was outlined. A method for sensor placement for Space Station Freedom is being implemented in COOL as a sample problem.

Evaluation of a New Spraying Machine for Barrier Treatment and Penetration of Bifenthrin on Vegetation Against Mosquitoes

DTIC Science & Technology

2015-03-01

one at the University of Florida Veterinary Entomology Laboratory (UF- VEL). Leaf samples for both laboratories were collected together. All samples...Mulla’s formula (Mulla et al. 1971): % reduction 5 100 2 (C1/T1 3 T2/C2) 3 100. The C1 variable was the mean number of mosquitoes from the control site...statistical analysis was performed using JMP 11.1 software (SAS Insti- tute Inc., Cary, NC). Treatment mortality was corrected with Abbott’s formula

Sealing ability of lateral condensation, thermoplasticized gutta-percha and flowable gutta-percha obturation techniques: A comparative in vitro study.

PubMed

Kumar, Nallkkapalayam Somasundaram Mohan; Prabu, P S; Prabu, Neethika; Rathinasamy, Shobana

2012-08-01

To evaluate and compare the sealing ability between the clod lateral condensation, thermoplasticized gutta-percha, and flowable gutta-percha obturation technique, under a stereomicroscope at ×40 magnification. Sixty single rooted teeth were selected and canals were shaped with K3 NiTi files. Irrigation was performed with 5.25% NaOCl and 17% ethylenediaminetetraacetic acid (EDTA). The teeth were then separated into three groups depending on the type of obturation technique: Group A, obturated using the lateral condensation technique and AH Plus sealer; Group B, obturated with thermoplasticized gutta-percha tech (Obtura III Max) and AH Plus sealer; and Group C, obturated using flowable gutta-percha technique (GuttaFlow). After storing the teeth in 100% humidity for 7 days at 37°C, the roots of the teeth were sectioned at five levels. The sections were then observed under a stereomicroscope at ×40 magnification and the images were analyzed for area of voids (AV) and frequency of voids. The data were statistically analyzed using the SPSS version 17 software. The 95% confidence intervals (CI) were calculated. One-way analysis of variance with post hoc test and non-parametric Mann-Whitney U test were carried out to compare the means. The lowest mean of AV was recorded in the thermoplasticized gutta-percha (Obtura III Max) group [1.0% (95% CI=0.5-1.5)]. This was statistically and significantly different from flowable gutta-percha (GuttaFlow) group [3.0% (95% CI=2.1-3.9)]. There was no significant difference between the thermoplasticized gutta-percha group and lateral condensation group [1.6% (95% CI=1.0-2.2)] with regard to the AV, but there was a statistically significant difference between the lateral condensation and flowable gutta-percha groups. The flowable gutta-percha group showed the maximum number of voids [56% (95% CI=48-64)], which was significantly higher than those in the lateral condensation [26% (95% CI=19-34)] and thermoplasticized gutta-percha [15% (95% CI=10-21)] groups. The thermoplasticized gutta-percha technique (Obtura III Max) had better adaptability to the canal walls when compared to the flowable gutta-percha (GuttaFlow) obturation and lateral condensation techniques.

[Effect of urinary Tamm-horsfall protein concentration changes under centrifugation and its association with urolithiasis formation in rats].

PubMed

Chen, Yuanhao; Guo, Heqing; Sun, Bin; Li, Jianye; Yan, Jingmin; Hong, Quan; Zou, Zhikang; Wang, Jianchang

2014-04-15

To explore the concentration changes of Tamm-Horsefall protein (THP) under centrifugation in rat urine and discuss its association with urolithiasis formation. A total of 40 Wistar rats were divided randomly into 4 groups of flying with stone (A), flying without stone (B), stone without flying (C) and control (D). After centrifugation, the THP concentrations of each group were measured by enzyme-linked immunosorbent assay (ELISA). Then urinary system was dissected, stained with hematoxylin & eosin and observed under electron microscopy to examine the distribution and number of each section. The SPSS 13.0 software was used for data analyses. Group A showed significant difference in THP concentrations with groups C and D ( (11 ± 4) vs (15 ± 6), (17 ± 4) ng/ml, P = 0.037 and 0.005).No statistically significant difference existed between groups A and B ((11 ± 5) ng/ml, P = 0.998) or groups C and D (P = 0.422). Group B had significant difference in THP concentrations with groups D (P = 0.036). Regarding the number of stones in ureter, Group A had statistically significant difference with B (P = 0.029).However, there was no difference in the number of bladder stones.In kidney stones, there was significant difference (P = 0.029) on "+ +" rating. Centrifugation may reduce the urinary concentration of THP so as cause urolithiasis formation in rats.

Microorganism penetration in dentinal tubules of instrumented and retreated root canal walls. In vitro SEM study.

PubMed

Al-Nazhan, Saad; Al-Sulaiman, Alaa; Al-Rasheed, Fellwa; Alnajjar, Fatimah; Al-Abdulwahab, Bander; Al-Badah, Abdulhakeem

2014-11-01

This in vitro study aimed to investigate the ability of Candida albicans (C. albicans) and Enterococcus faecalis (E. faecalis) to penetrate dentinal tubules of instrumented and retreated root canal surface of split human teeth. Sixty intact extracted human single-rooted teeth were divided into 4 groups, negative control, positive control without canal instrumentation, instrumented, and retreated. Root canals in the instrumented group were enlarged with endodontic instruments, while root canals in the retreated group were enlarged, filled, and then removed the canal filling materials. The teeth were split longitudinally after canal preparation in 3 groups except the negative control group. The teeth were inoculated with both microorganisms separately and in combination. Teeth specimens were examined by scanning electron microscopy (SEM), and the depth of penetration into the dentinal tubules was assessed using the SMILE view software (JEOL Ltd). Penetration of C. albicans and E. faecalis into the dentinal tubules was observed in all 3 groups, although penetration was partially restricted by dentin debris of tubules in the instrumented group and remnants of canal filling materials in the retreated group. In all 3 groups, E. faecalis penetrated deeper into the dentinal tubules by way of cell division than C. albicans which built colonies and penetrated by means of hyphae. Microorganisms can easily penetrate dentinal tubules of root canals with different appearance based on the microorganism size and status of dentinal tubules.

Objective image analysis of the meibomian gland area.

PubMed

Arita, Reiko; Suehiro, Jun; Haraguchi, Tsuyoshi; Shirakawa, Rika; Tokoro, Hideaki; Amano, Shiro

2014-06-01

To evaluate objectively the meibomian gland area using newly developed software for non-invasive meibography. Eighty eyelids of 42 patients without meibomian gland loss (meiboscore=0), 105 eyelids of 57 patients with loss of less than one-third total meibomian gland area (meiboscore=1), 13 eyelids of 11 patients with between one-third and two-thirds loss of meibomian gland area (meiboscore=2) and 20 eyelids of 14 patients with two-thirds loss of meibomian gland area (meiboscore=3) were studied. Lid borders were automatically determined. The software evaluated the distribution of the luminance and, by enhancing the contrast and reducing image noise, the meibomian gland area was automatically discriminated. The software calculated the ratio of the total meibomian gland area relative to the total analysis area in all subjects. Repeatability of the software was also evaluated. The mean ratio of the meibomian gland area to the total analysis area in the upper/lower eyelids was 51.9±5.7%/54.7±5.4% in subjects with a meiboscore of 0, 47.7±6.0%/51.5±5.4% in those with a meiboscore of 1, 32.0±4.4%/37.2±3.5% in those with a meiboscore of 2 and 16.7±6.4%/19.5±5.8% in subjects with a meiboscore of 3. The meibomian gland area was objectively evaluated using the developed software. This system could be useful for objectively evaluating the effect of treatment on meibomian gland dysfunction. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://group.bmj.com/group/rights-licensing/permissions.

Software Metrics

DTIC Science & Technology

1988-12-01

software development scene is often charac- c. SPQR Model-Jones terized by: * schedule and cost estimates that are gross-d. COPMO-Thebaut ly inaccurate, SEI...time c. SPQR Model-Jones (in seconds) is simply derived from E by dividing T. Capers Jones has developed a software cost by the Stroud number, S...estimation model called the Software Produc- T=E/S tivity, Quality, and Reliability ( SPQR ) model. The basic approach is similar to that of Boehm’s The value

DOE Office of Scientific and Technical Information (OSTI.GOV)

Ogden, K; O’Dwyer, R; Bradford, T

Purpose: To reduce differences in features calculated from MRI brain scans acquired at different field strengths with or without Gadolinium contrast. Methods: Brain scans were processed for 111 epilepsy patients to extract hippocampus and thalamus features. Scans were acquired on 1.5 T scanners with Gadolinium contrast (group A), 1.5T scanners without Gd (group B), and 3.0 T scanners without Gd (group C). A total of 72 features were extracted. Features were extracted from original scans and from scans where the image pixel values were rescaled to the mean of the hippocampi and thalami values. For each data set, cluster analysismore » was performed on the raw feature set and for feature sets with normalization (conversion to Z scores). Two methods of normalization were used: The first was over all values of a given feature, and the second by normalizing within the patient group membership. The clustering software was configured to produce 3 clusters. Group fractions in each cluster were calculated. Results: For features calculated from both the non-rescaled and rescaled data, cluster membership was identical for both the non-normalized and normalized data sets. Cluster 1 was comprised entirely of Group A data, Cluster 2 contained data from all three groups, and Cluster 3 contained data from only groups 1 and 2. For the categorically normalized data sets there was a more uniform distribution of group data in the three Clusters. A less pronounced effect was seen in the rescaled image data features. Conclusion: Image Rescaling and feature renormalization can have a significant effect on the results of clustering analysis. These effects are also likely to influence the results of supervised machine learning algorithms. It may be possible to partly remove the influence of scanner field strength and the presence of Gadolinium based contrast in feature extraction for radiomics applications.« less

Adaptable Computing Environment/Self-Assembling Software

DOE Office of Scientific and Technical Information (OSTI.GOV)

Osbourn, Gordon C.; Bouchard, Ann M.; Bartholomew, John W.

Complex software applications are difficult to learn to use and to remember how to use. Further, the user has no control over the functionality available in a given application. The software we use can be created and modified only by a relatively small group of elite, highly skilled artisans known as programmers. "Normal users" are powerless to create and modify software themselves, because the tools for software development, designed by and for programmers, are a barrier to entry. This software, when completed, will be a user-adaptable computing environment in which the user is really in control of his/her own software,more » able to adapt the system, make new parts of the system interactive, and even modify the behavior of the system itself. Som key features of the basic environment that have been implemented are (a) books in bookcases, where all data is stored, (b) context-sensitive compass menus (compass, because the buttons are located in compass directions relative to the mouose cursor position), (c) importing tabular data and displaying it in a book, (d) light-weight table querying/sorting, (e) a Reach&Get capability (sort of a "smart" copy/paste that prevents the user from copying invalid data), and (f) a LogBook that automatically logs all user actions that change data or the system itself. To bootstrap toward full end-user adaptability, we implemented a set of development tools. With the development tools, compass menus can be made and customized.« less

DOE Office of Scientific and Technical Information (OSTI.GOV)

Ballard, Sanford; Hipp, James; Kraus, Brian

GeoTess is a model parameterization and software support library that manages the construction, population, storage, and interrogation of data stored in 2D and 3D Earth models. Here, the software is available in Java and C++, with a C interface to the C++ library.

Comparing the antiplaque efficacy of 0.5% Camellia sinensis extract, 0.05% sodium fluoride, and 0.2% chlorhexidine gluconate mouthwash in children.

PubMed

Hambire, Chaitali U; Jawade, Rashmi; Patil, Amol; Wani, Vaibhav R; Kulkarni, Ankur A; Nehete, Parag B

2015-01-01

Dental caries is a multifactorial disease which requires a susceptible host, a cariogenic microflora, and a suitable substrate that must be present for a sufficient length of time. Tea is prepared by the infusion of dried leaves of the tea plant, Camellia sinensis, which contains bioactive compounds like polyphenols, flavonoids, and catechins that are thought to be responsible for the health benefits that have traditionally been attributed to tea. These compounds have multidimensional effects such as antibacterial action, inhibitory action on the bacterial and salivary amylase, and inhibition of acid production. The aim of this study is to compare the antiplaque efficacy of 0.5% C. sinensis extract, 0.05% sodium fluoride, and 0.2% chlorhexidine gluconate mouthwash in children. A randomized blinded controlled trial with 60 healthy children of age group 9-14 years was carried out. The subjects were randomly assigned to three groups, i.e. group A - 0.2% chlorhexidine gluconate, group B - 0.05% sodium fluoride, and group C - 0.5% C. sinensis extract, with 20 subjects per group. Plaque accumulation and gingival condition were recorded using plaque index and gingival index. Oral hygiene was assessed by simplified oral hygiene index (OHIS). Salivary pH was assessed using indikrom pH strips. Plaque, gingival, and simplified OHI scores as well as salivary pH were recorded at baseline, immediately after first rinse, after 1 week, and in the 2(nd) week. The data were analyzed using a computer software program (SPSS version 17). Analysis of variance (ANOVA) tests were used to identify significant differences between the means of the study groups. Finally, paired t-tests were used to assess the significance of changes within each group between time periods. Critical P values of significance were set at 0.05 and the confidence level set at 95%. Mean plaque and gingival scores were reduced over the 2-week trial period in the experimental groups. Antiplaque effectiveness was observed in all groups, the highest being in group C (P < 0.05). Chlorhexidine gluconate and tea showed comparative effectiveness on gingiva better than sodium fluoride (P < 0.05). The salivary pH increase was sustained and significant in groups B and C compared to group A. Oral hygiene improvement was better appreciated in groups A and C. The effectiveness of 0.5% C. sinensis extract was more compared to 0.05% sodium fluoride and 0.2% chlorhexidine gluconate mouth rinses. It should be explored as a cost-effective and safe long-term adjunct to oral self-care of patients as it has prophylactic benefits with minimum side effects.

Collected software engineering papers, volume 9

NASA Technical Reports Server (NTRS)

1991-01-01

This document is a collection of selected technical papers produced by participants in the Software Engineering Laboratory (SEL) from November 1990 through October 1991. The purpose of the document is to make available, in one reference, some results of SEL research that originally appeared in a number of different forums. This is the ninth such volume of technical papers produced by the SEL. Although these papers cover several topics related to software engineering, they do not encompass the entire scope of SEL activities and interests. For the convenience of this presentation, the eight papers contained here are grouped into three major categories: (1) software models studies; (2) software measurement studies; and (3) Ada technology studies. The first category presents studies on reuse models, including a software reuse model applied to maintenance and a model for an organization to support software reuse. The second category includes experimental research methods and software measurement techniques. The third category presents object-oriented approaches using Ada and object-oriented features proposed for Ada. The SEL is actively working to understand and improve the software development process at GSFC.

Stress analysis in platform-switching implants: a 3-dimensional finite element study.

PubMed

Pellizzer, Eduardo Piza; Verri, Fellippo Ramos; Falcón-Antenucci, Rosse Mary; Júnior, Joel Ferreira Santiago; de Carvalho, Paulo Sérgio Perri; de Moraes, Sandra Lúcia Dantas; Noritomi, Pedro Yoshito

2012-10-01

The aim of this study was to evaluate the influence of the platform-switching technique on stress distribution in implant, abutment, and peri-implant tissues, through a 3-dimensional finite element study. Three 3-dimensional mandibular models were fabricated using the SolidWorks 2006 and InVesalius software. Each model was composed of a bone block with one implant 10 mm long and of different diameters (3.75 and 5.00 mm). The UCLA abutments also ranged in diameter from 5.00 mm to 4.1 mm. After obtaining the geometries, the models were transferred to the software FEMAP 10.0 for pre- and postprocessing of finite elements to generate the mesh, loading, and boundary conditions. A total load of 200 N was applied in axial (0°), oblique (45°), and lateral (90°) directions. The models were solved by the software NeiNastran 9.0 and transferred to the software FEMAP 10.0 to obtain the results that were visualized through von Mises and maximum principal stress maps. Model A (implants with 3.75 mm/abutment with 4.1 mm) exhibited the highest area of stress concentration with all loadings (axial, oblique, and lateral) for the implant and the abutment. All models presented the stress areas at the abutment level and at the implant/abutment interface. Models B (implant with 5.0 mm/abutment with 5.0 mm) and C (implant with 5.0 mm/abutment with 4.1 mm) presented minor areas of stress concentration and similar distribution pattern. For the cortical bone, low stress concentration was observed in the peri-implant region for models B and C in comparison to model A. The trabecular bone exhibited low stress that was well distributed in models B and C. Model A presented the highest stress concentration. Model B exhibited better stress distribution. There was no significant difference between the large-diameter implants (models B and C).

The Software Maintenance Spectrum: Using More than Just New Toys

DTIC Science & Technology

2000-04-01

Deitel & Deitel, How to Program Java, Prentice Hall, Upper Saddle River, NJ, 1998. Bjarne Stroustrup, The C++ Programming Language, ATT Bell Labs, New... to Program Java, Prentice Hall, Upper Saddle River, NJ, 1998. Dershem, Herbert L and Michael J. Jipping, Programming Languages: Structures and Models...Chikofsky, Elliot and James Cross. Reverse Engineering and Design Recovery: A Taxonomy. IEEE Software, 7(1):13-17 (Jan 1990). Deitel & Deitel, How

NPS (Naval Postgraduate School) Supply Requisition Database - Interactive Software as an Alternative to Written Instructions.

DTIC Science & Technology

1986-03-01

SRdb ... .......... .35 APPENDIX A: ABBREVIATIONS AND ACRONYMS ......... 37 " APPENDIX B: USER’S MANUAL ..... ............... 38 APPENDIX C: DATABASE...percentage of situations. The purpose of this paper is to examine and propose a software-oriented alternative to the current manual , instruction-driven...Department Customer Service Manual (Ref. 1] and the applicable NPS Comptroller instruction [Ref. 2]. Several modifications to these written quidelines

Trauma Pod/Operating Room of the Future

DTIC Science & Technology

2006-02-01

into C++ objects. OpenBinder software provided by ORNL was also used. This approach reduces the potential errors that might be introduced by...publications can be found here. OSCAR has been used by developers at the Univ. of Texas, ORNL , NASA/Ames, and NASA/JSC. RRGKinematix, a single...the last DH frame (at the wrist) is 70 mm. Position Travel Limits (degrees) - these are software limits as specified by ORNL Joint 1

Models for Threat Assessment in Networks

DTIC Science & Technology

2006-09-01

Software International and Command AntiVirus . [Online]. Available: http://www.commandsoftware.com/virus/newlove.html [38] C. Ng and P. Ferrie. (2000...28 2.3 False positive trends across all population sizes for r=0.7 and m=0.1 . . . . 33 2.4 False negative trends across all population...benefits analysis is often performed to determine the list of mitigation procedures. Traditionally, risk assessment has been done in part with software

Source Lines Counter (SLiC) Version 4.0

NASA Technical Reports Server (NTRS)

Monson, Erik W.; Smith, Kevin A.; Newport, Brian J.; Gostelow, Roli D.; Hihn, Jairus M.; Kandt, Ronald K.

2011-01-01

Source Lines Counter (SLiC) is a software utility designed to measure software source code size using logical source statements and other common measures for 22 of the programming languages commonly used at NASA and the aerospace industry. Such metrics can be used in a wide variety of applications, from parametric cost estimation to software defect analysis. SLiC has a variety of unique features such as automatic code search, automatic file detection, hierarchical directory totals, and spreadsheet-compatible output. SLiC was written for extensibility; new programming language support can be added with minimal effort in a short amount of time. SLiC runs on a variety of platforms including UNIX, Windows, and Mac OSX. Its straightforward command-line interface allows for customization and incorporation into the software build process for tracking development metrics. T

V-Go Insulin Delivery System Versus Multiple Daily Insulin Injections for Patients With Uncontrolled Type 2 Diabetes Mellitus.

PubMed

Winter, Abigail; Lintner, Michaela; Knezevich, Emily

2015-04-21

Type 2 diabetes mellitus affects over 29.1 million Americans, diagnosed and undiagnosed. Achieving and maintaining glycemic control for these patients is of extreme importance when working to prevent complications and improve quality of life for patients. The V-Go is a newly developed insulin delivery system. The push of a button inserts a needle into the patient once daily and remains attached for 24 hours. The V-Go is designed to release a set basal rate throughout the day, while allowing patients to provide up to 36 units of on-demand bolus insulin with the manual click of 2 buttons. It is a spring-loaded device filled daily with rapid-acting insulin that runs without the use of batteries or computer software. The main objective of this prospective active comparator study was to observe the A1C lowering effects of multiple daily insulin injections (MDII) versus the use of the V-Go insulin delivery system for patients with uncontrolled type 2 diabetes mellitus over a 3-month period. In addition, the effect on insulin requirement for these patients was assessed with secondary comparisons of weight, blood pressure, prevalence of hypoglycemic events, and quality of life before and after 3 months of intensified insulin therapy with regular monitoring by a clinical pharmacist at an internal medicine clinic. The average A1C lowering experienced by the 3 patients in the V-Go group was 1.5%, while the average A1C change in the 3 patients in the MDII group was an increase of 0.2%. All patients in the V-Go group experienced a decrease in insulin total daily dose (TDD), with an average decrease of 26.3 units. All patients in the MDII group experienced an increase in insulin TDD with an average of 15 units daily to achieve therapeutic goals individualized for each patient. All patients who underwent intensification of insulin therapy experienced an increase in subjective quality of life (QOL) as determined using the Diabetes-39 (D-39) questionnaire, though QOL results lacked statistical significance. © 2015 Diabetes Technology Society.

The Orion GN and C Data-Driven Flight Software Architecture for Automated Sequencing and Fault Recovery

NASA Technical Reports Server (NTRS)

King, Ellis; Hart, Jeremy; Odegard, Ryan

2010-01-01

The Orion Crew Exploration Vehicle (CET) is being designed to include significantly more automation capability than either the Space Shuttle or the International Space Station (ISS). In particular, the vehicle flight software has requirements to accommodate increasingly automated missions throughout all phases of flight. A data-driven flight software architecture will provide an evolvable automation capability to sequence through Guidance, Navigation & Control (GN&C) flight software modes and configurations while maintaining the required flexibility and human control over the automation. This flexibility is a key aspect needed to address the maturation of operational concepts, to permit ground and crew operators to gain trust in the system and mitigate unpredictability in human spaceflight. To allow for mission flexibility and reconfrgurability, a data driven approach is being taken to load the mission event plan as well cis the flight software artifacts associated with the GN&C subsystem. A database of GN&C level sequencing data is presented which manages and tracks the mission specific and algorithm parameters to provide a capability to schedule GN&C events within mission segments. The flight software data schema for performing automated mission sequencing is presented with a concept of operations for interactions with ground and onboard crew members. A prototype architecture for fault identification, isolation and recovery interactions with the automation software is presented and discussed as a forward work item.

Prognosis of Light Chain Amyloidosis With Preserved LVEF: Added Value of 2D Speckle-Tracking Echocardiography to the Current Prognostic Staging System.

PubMed

Barros-Gomes, Sergio; Williams, Brittney; Nhola, Lara F; Grogan, Martha; Maalouf, Joseph F; Dispenzieri, Angela; Pellikka, Patricia A; Villarraga, Hector R

2017-04-01

This study evaluated whether 2-dimensional speckle-tracking echocardiography (2D-STE) has incremental value for prognosis over traditional clinical, echocardiographic, and serological markers-with main focus on the current prognostic staging system-in light-chain (AL) amyloidosis patients with preserved left ventricular ejection fraction. Cardiac amyloidosis (CA) is the major determinant of outcome in AL amyloidosis. The current prognostic staging system is based primarily on serum levels of cardiac troponin T (cTnT), N-terminal pro-B-type natriuretic peptide (NT-proBNP), and free light chain differential (FLC-diff). Consecutive patients with biopsy-proven AL amyloidosis and left ventricular ejection fraction ≥55% were divided into group 1 with CA (n = 63) and group 2 without CA (n = 87). Global longitudinal strain (GLS) by 2D-STE was performed with Vivid E9 (GE Healthcare Co., Milwaukee, Wisconsin) and syngo Velocity Vector Imaging (VVI) software (Siemens Medical Solutions USA, Inc., Malvern, Pennsylvania) (GLS GE and GLS VVI , respectively). Thirty-two deaths (51%) occurred in group 1 and 13 (15%) in group 2 (p ≤ 0.001). Group 1 had thicker walls, lower early diastolic tissue Doppler velocity at septal mitral annulus, and greater left ventricular mass, left atrial volume, glomerular filtration rate, FLC-diff, cTnT, and NT-proBNP (p < 0.001). For the entire cohort, GLS GE  ≥ -14.81, GLS VVI ≥-15.02, cTnT, NT-proBNP, FLC-diff, age, left ventricular wall thickness, early diastolic tissue Doppler velocity at septal mitral annulus, diastolic dysfunction grade, glomerular filtration rate, deceleration time, and left atrial volume were univariate predictors of death. In a multivariate Cox model, GLS GE ≥-14.81 (hazard ratio [HR]: 2.68; 95% confidence interval [CI]: 1.07 to 7.13; p = 0.03), FLC-diff, NT-proBNP, and age were independent predictors of survival. There was also a strong trend for GLS VVI ≥-15.02 (HR: 2.44; 95% CI: 0.98 to 6.33; p = 0.055). Using a nested logistic regression model, GLS GE (p = 0.03) and GLS VVI (p = 0.05) provided incremental prognostic value over cTnT, NT-proBNP, and FLC-diff. For survival analysis limited to group 2 (non-CA), GLS GE and GLS VVI both predicted all-cause mortality (GLS GE HR: 1.23; 95% CI: 1.03 to 1.47 [p = 0.02]; GLS VVI HR: 1.22; 95% CI: 1.01 to 1.49 [p = 0.04], respectively). 2D-STE predicted outcome and provided incremental prognostic information over the current prognostic staging system, especially in the group without CA. Copyright © 2017 American College of Cardiology Foundation. Published by Elsevier Inc. All rights reserved.

A Mechanized Decision Support System for Academic Scheduling.

DTIC Science & Technology

1986-03-01

an operational system called software. The first step in the development phase is Design . Designers destribute software control by factoring the Data...SUBJECT TERMS (Continue on reverse if necessary and identify by block number) ELD GROUP SUB-GROUP Scheduling, Decision Support System , Software Design ...scheduling system . It will also examine software - design techniques to identify the most appropriate method- ology for this problem. " - Chapter 3 will

Crustaceans from a tropical estuarine sand-mud flat, Pacific, Costa Rica, (1984-1988) revisited.

PubMed

Vargas-Zamora, José A; Sibaja-Cordero, Jeffrey A; Vargas-Castillo, Rita

2012-12-01

The availability of data sets for time periods of more than a year is scarce for tropical environments. Advances in hardware and software speed-up the re-analysis of old data sets and facilitates the description of population oscillations. Using recent taxonomic literature and software we have updated and re-analized the information on crustacean diversity and population fluctuations from a set of cores collected at a mud-sand flat in the mid upper Gulf of Nicoya estuary, Pacific coast of Costa Rica (1984-1988). A total of 112 morphological species of macroinvertebrates was found, of which 29 were crustaceans. Taxonomic problems, maily with the peracarids, prevented the identification of a group of species. The abundance patterns of the crab Pinnixa valerii, the ostracod Cyprideis pacifica, and the cumacean Coricuma nicoyensis were analized with the Generalized Additive Models of the free software R. The models evidenced a variety of population oscillations during the sampling period. These oscillations probably included perturbations induced by external factors, like the strong red tide events of 1985. In additon, early on 1984 the populations might have been at an altered state due to the inpact of El Niño 1982-83. Thus, the oscillations observed during the study period departed from the expected seasonality (dry vs rainy) pattern and are thus considered atypical for this tropical estuarine tidal-flat. Crustacean diversity and population peaks were within the range of examples found in worldwide literature. However, abundances of the cumacean C. nicoyensis, an endemic species, are the highest reported for a tropical estuary. Comparative data from tropical tidal flat crustaceans continues to be scarce. Crustaceans (total vs groups) had population changes in response to the deployment of predator exclusion cages during the dry and rainy seasons of 1985. Temporal and spatial patchiness characterized the abundances of P. valeri, C. pacifica and C. nicoyenis.

Lessons from 30 Years of Flight Software

NASA Technical Reports Server (NTRS)

McComas, David C.

2015-01-01

This presentation takes a brief historical look at flight software over the past 30 years, extracts lessons learned and shows how many of the lessons learned are embodied in the Flight Software product line called the core Flight System (cFS). It also captures the lessons learned from developing and applying the cFS.

Systems and Software Producibility Collaboration and Experimental Environment (SPRUCE)

DTIC Science & Technology

2009-04-23

Research Manhattan Project Like Research – Transition timeframe needed • Current generation programs – DoD acquisitions over next 1-5 years • Next...Specific Computing Plant B a s i c Transformational Research Manhattan Project Like Research B a s i c 16 • Sponsored by Lockheed Martin

Synergistic effect of aged garlic extract and naltrexone on improving immune responses to experimentally induced fibrosarcoma tumor in BALB/c mice

PubMed Central

Ebrahimpour, Soheil; Tabari, Mohaddeseh Abouhosseini; Youssefi, Mohammad Reza; Aghajanzadeh, Hamid; Behzadi, Manijeh Yousefi

2013-01-01

Background: Garlic, a medicinal plant, and Naltrexone (NTX), an opioid receptor antagonist, both have immunomodulatory and antitumor effects. Current study was designed to evaluate synergistic antitumor effects of aged garlic extract (AGE) and NTX. Materials and Methods: WEHI-164 fibrosarcoma cells were implanted subcutaneously on day 0 into right flank of 80 BALB/c mice at age of 8 weeks. Mice were randomly categorized in four separate groups: The first group received AGE (100 mg/kg, i.p.), the second group received NTX (0.5 mg/kg, i.p.), the third group received both of them, and the fourth group received phosphate buffered saline as control group. Treatments were administered three times per week. Tumor growth was measured and morbidity was recorded. Subpopulations of CD4+/CD8+ T cells were determined using flowcytometery. WEHI-164 cell specific cytotoxicity of splenocytes and in vitro production of interferon-gamma (IFN-γ) and interleukin-4 (IL-4) cytokines were measured. All statistical analyses were conducted with SPSS 16 software and P < 0.05 was considered to be statistically significant. Results: The mice who received AGE+NTX had significantly longer survival time compared with the mice treated with AGE or NTX alone. An enhanced inhibitory effect on tumor growth was seen in combination therapy group. The CD4+/CD8+ ratio and in vitro IFN-γ production of splenocytes were significantly increased in AGE+NTX and NTX groups. WEHI-164 specific cytotoxicity of splenocytes was also significantly increased at 25:1 E:T ratio in AGE+NTX treated mice. Coadministration of AGE with NTX resulted in improvement of immune responses against experimentally implanted fibrosarcoma tumors in BALB/c mice. Conclusions: AGE showed synergistic effects with NTX on inhibition of tumor growth and increment of survival times. PMID:23901215

Estimating Software-Development Costs With Greater Accuracy

NASA Technical Reports Server (NTRS)

Baker, Dan; Hihn, Jairus; Lum, Karen

2008-01-01

COCOMOST is a computer program for use in estimating software development costs. The goal in the development of COCOMOST was to increase estimation accuracy in three ways: (1) develop a set of sensitivity software tools that return not only estimates of costs but also the estimation error; (2) using the sensitivity software tools, precisely define the quantities of data needed to adequately tune cost estimation models; and (3) build a repository of software-cost-estimation information that NASA managers can retrieve to improve the estimates of costs of developing software for their project. COCOMOST implements a methodology, called '2cee', in which a unique combination of well-known pre-existing data-mining and software-development- effort-estimation techniques are used to increase the accuracy of estimates. COCOMOST utilizes multiple models to analyze historical data pertaining to software-development projects and performs an exhaustive data-mining search over the space of model parameters to improve the performances of effort-estimation models. Thus, it is possible to both calibrate and generate estimates at the same time. COCOMOST is written in the C language for execution in the UNIX operating system.

Feature tracking CMR reveals abnormal strain in preclinical arrhythmogenic right ventricular dysplasia/ cardiomyopathy: a multisoftware feasibility and clinical implementation study.

PubMed

Bourfiss, Mimount; Vigneault, Davis M; Aliyari Ghasebeh, Mounes; Murray, Brittney; James, Cynthia A; Tichnell, Crystal; Mohamed Hoesein, Firdaus A; Zimmerman, Stefan L; Kamel, Ihab R; Calkins, Hugh; Tandri, Harikrishna; Velthuis, Birgitta K; Bluemke, David A; Te Riele, Anneline S J M

2017-09-01

Regional right ventricular (RV) dysfunction is the hallmark of Arrhythmogenic Right Ventricular Dysplasia/Cardiomyopathy (ARVD/C), but is currently only qualitatively evaluated in the clinical setting. Feature Tracking Cardiovascular Magnetic Resonance (FT-CMR) is a novel quantitative method that uses cine CMR to calculate strain values. However, most prior FT-CMR studies in ARVD/C have focused on global RV strain using different software methods, complicating implementation of FT-CMR in clinical practice. We aimed to assess the clinical value of global and regional strain using FT-CMR in ARVD/C and to determine differences between commercially available FT-CMR software packages. We analyzed cine CMR images of 110 subjects (39 overt ARVD/C [mutation+/phenotype+], 40 preclinical ARVD/C [mutation+/phenotype-] and 31 control) for global and regional (subtricuspid, anterior, apical) RV strain in the horizontal longitudinal axis using four FT-CMR software methods (Multimodality Tissue Tracking, TomTec, Medis and Circle Cardiovascular Imaging). Intersoftware agreement was assessed using Bland Altman plots. For global strain, all methods showed reduced strain in overt ARVD/C patients compared to control subjects (p < 0.041), whereas none distinguished preclinical from control subjects (p > 0.275). For regional strain, overt ARVD/C patients showed reduced strain compared to control subjects in all segments which reached statistical significance in the subtricuspid region for all software methods (p < 0.037), in the anterior wall for two methods (p < 0.005) and in the apex for one method (p = 0.012). Preclinical subjects showed abnormal subtricuspid strain compared to control subjects using one of the software methods (p = 0.009). Agreement between software methods for absolute strain values was low (Intraclass Correlation Coefficient = 0.373). Despite large intersoftware variability of FT-CMR derived strain values, all four software methods distinguished overt ARVD/C patients from control subjects by both global and subtricuspid strain values. In the subtricuspid region, one software package distinguished preclinical from control subjects, suggesting the potential to identify early ARVD/C prior to overt disease expression.

Progress in the Development of a Prototype Reuse Enablement System

NASA Astrophysics Data System (ADS)

Marshall, J. J.; Downs, R. R.; Gilliam, L. J.; Wolfe, R. E.

2008-12-01

An important part of promoting software reuse is to ensure that reusable software assets are readily available to the software developers who want to use them. Through dialogs with the community, the NASA Earth Science Data Systems Software Reuse Working Group has learned that the lack of a centralized, domain- specific software repository or catalog system addressing the needs of the Earth science community is a major barrier to software reuse within the community. The Working Group has proposed the creation of such a reuse enablement system, which would provide capabilities for contributing and obtaining reusable software, to remove this barrier. The Working Group has recommended the development of a Reuse Enablement System to NASA and has performed a trade study to review systems with similar capabilities and to identify potential platforms for the proposed system. This was followed by an architecture study to determine an expeditious and cost-effective solution for this system. A number of software packages and systems were examined through both creating prototypes and examining existing systems that use the same software packages and systems. Based on the results of the architecture study, the Working Group developed a prototype of the proposed system using the recommended software package, through an iterative process of identifying needed capabilities and improving the system to provide those capabilities. Policies for the operation and maintenance of the system are being established for the system, and the identification of system policies also has contributed to the development process. Additionally, a test plan is being developed for formal testing of the prototype, to ensure that it meets all of the requirements previously developed by the Working Group. This poster summarizes the results of our work to date, focusing on the most recent activities.

Working Group Reports: Working Group 1 - Software Systems Design and Implementation for Environmental Modeling

EPA Science Inventory

The purpose of the Interagency Steering Committee on Multimedia Environmental Modeling (ISCMEM) is to foster the exchange of information about environmental modeling tools, modeling frameworks, and environmental monitoring databases that are all in the public domain. It is compos...

A multicenter randomized, controlled clinical trial comparing the use of displacement cords, an aluminum chloride paste, and a combination of paste and cords for tissue displacement.

PubMed

Einarsdottir, Erna R; Lang, Niklaus P; Aspelund, Thor; Pjetursson, Bjarni E

2018-01-01

Gingival recession after soft tissue displacement for impression making in fixed prosthodontics may pose a problem for treatment success in the esthetic areas of the mouth. Knowledge about the soft tissue reaction of common gingival displacement methods is limited. The purpose of this clinical randomized controlled trial (RCT) was to evaluate changes in the marginal soft tissue height with 3 different gingival tissue displacement techniques for definitive impression making of natural teeth. A total of 67 individuals were randomized to 3 groups. In test group 1 (P; n=22), only aluminum chloride paste was used to displace the gingiva. In test group 2 (CP; n=23), a cord was inserted, and aluminum chloride paste was also used. In the control group (C; n=22), 2 cords were used to displace the gingiva (double-cord technique). Clinical measurements of the gingival position were made before treatment began and at 30 ±10 days after prosthesis delivery. Study casts were fabricated at different stages of the treatment, standardized photographs were made, and changes in the buccal gingival position were measured using graphics editing software. In addition, the participants' perception of the clinical procedure and the technicians' evaluation of the die preparation were recorded. One-way ANOVA models were applied to compare the response variables among the groups: (a) the position of the gingival margin (millimeters), (b) mean probing pocket depth (millimeters), (c) gingival thickness (millimeters), (d) amount of keratinized tissue (millimeters), and (e) mean changes in gingival margin height (millimeters). Unpaired t tests were also used to compare the mean values between groups. For comparisons between different categories, chi-square tests were performed (α=.05 for all tests). In the period between impression and delivery, a minor gain in gingival height of 0.058 mm (±0.13 SD) for P and 0.013 mm (±1.19 SD) for CP. However, a minor gingival recession of 0.049 mm (±0.13 SD) was reported for group C. The results for all groups showed that 21% of abutment teeth gained >0.1 mm in gingival height, 58% had stable gingival height (0 ±0.10 mm), 21% showed minor gingival recession (0.1 to 0.5 mm), and no abutment teeth showed moderate or severe gingival recession (>0.5 mm). The incidence of minor gingival recession was 8% in group P, 23% in group CP, and 32% in group C (P=.015). Fifteen participants (24%) experienced some discomfort after the procedure. The differences between the groups were not significant (P>.05). The laboratory technicians found the definitive die preparation significantly more challenging for group P (visual analog scale [VAS], 79) and CP (VAS, 82) than group C (mean VAS, 93; P=.003). Minor or moderate gingival recession (<1 mm) is more likely to occur when conventional cords are used during impression making. However, the laboratory technicians found the die preparation significantly less challenging when the double-cord technique was used than when impressions were made using the paste displacement technique. Copyright © 2017 Editorial Council for the Journal of Prosthetic Dentistry. Published by Elsevier Inc. All rights reserved.

Mission planning, mission analysis and software formulation. Level C requirements for the shuttle mission control center orbital guidance software

NASA Technical Reports Server (NTRS)

Langston, L. J.

1976-01-01

The formulation of Level C requirements for guidance software was reported. Requirements for a PEG supervisor which controls all input/output interfaces with other processors and determines which PEG mode is to be utilized were studied in detail. A description of the two guidance modes for which Level C requirements have been formulated was presented. Functions required for proper execution of the guidance software were defined. The requirements for a navigation function that is used in the prediction logic of PEG mode 4 were discussed. It is concluded that this function is extracted from the current navigation FSSR.

Representation mutations from standard genetic codes

NASA Astrophysics Data System (ADS)

Aisah, I.; Suyudi, M.; Carnia, E.; Suhendi; Supriatna, A. K.

2018-03-01

Graph is widely used in everyday life especially to describe model problem and describe it concretely and clearly. In addition graph is also used to facilitate solve various kinds of problems that are difficult to be solved by calculation. In Biology, graph can be used to describe the process of protein synthesis in DNA. Protein has an important role for DNA (deoxyribonucleic acid) or RNA (ribonucleic acid). Proteins are composed of amino acids. In this study, amino acids are related to genetics, especially the genetic code. The genetic code is also known as the triplet or codon code which is a three-letter arrangement of DNA nitrogen base. The bases are adenine (A), thymine (T), guanine (G) and cytosine (C). While on RNA thymine (T) is replaced with Urasil (U). The set of all Nitrogen bases in RNA is denoted by N = {C U, A, G}. This codon works at the time of protein synthesis inside the cell. This codon also encodes the stop signal as a sign of the stop of protein synthesis process. This paper will examine the process of protein synthesis through mathematical studies and present it in three-dimensional space or graph. The study begins by analysing the set of all codons denoted by NNN such that to obtain geometric representations. At this stage there is a matching between the sets of all nitrogen bases N with Z 2 × Z 2; C=(\\overline{0},\\overline{0}),{{U}}=(\\overline{0},\\overline{1}),{{A}}=(\\overline{1},\\overline{0}),{{G}}=(\\overline{1},\\overline{1}). By matching the algebraic structure will be obtained such as group, group Klein-4,Quotien group etc. With the help of Geogebra software, the set of all codons denoted by NNN can be presented in a three-dimensional space as a multicube NNN and also can be represented as a graph, so that can easily see relationship between the codon.

Incorporating Software Requirements into the System RFP: Survey of RFP Language for Software by Topic, v. 2.0

DTIC Science & Technology

2009-05-01

CDRL) System - Terminal S TMOS - SEIT CL TMOS - IA/ Crypto CL Space - Payload S Space - SEIT C Space - IA/ Crypto C Role Legend: CL...strategy for maintaining the currency of the technology (through Commercial off-the-shelf software (COTS) and other reusable Non-Developmental Items (NDI...the strategy for maintaining the currency of technology (e.g., through Commercial off-the-shelf software (COTS) insertion, technology refresh

Crystal Symmetry Algorithms in a High-Throughput Framework for Materials

NASA Astrophysics Data System (ADS)

Taylor, Richard

The high-throughput framework AFLOW that has been developed and used successfully over the last decade is improved to include fully-integrated software for crystallographic symmetry characterization. The standards used in the symmetry algorithms conform with the conventions and prescriptions given in the International Tables of Crystallography (ITC). A standard cell choice with standard origin is selected, and the space group, point group, Bravais lattice, crystal system, lattice system, and representative symmetry operations are determined. Following the conventions of the ITC, the Wyckoff sites are also determined and their labels and site symmetry are provided. The symmetry code makes no assumptions on the input cell orientation, origin, or reduction and has been integrated in the AFLOW high-throughput framework for materials discovery by adding to the existing code base and making use of existing classes and functions. The software is written in object-oriented C++ for flexibility and reuse. A performance analysis and examination of the algorithms scaling with cell size and symmetry is also reported.

48 CFR 208.7400 - Scope of subpart.

Code of Federal Regulations, 2010 CFR

2010-10-01

... OF DEFENSE ACQUISITION PLANNING REQUIRED SOURCES OF SUPPLIES AND SERVICES Enterprise Software... commercial software and software maintenance, including software and software maintenance that is acquired— (a) As part of a system or system upgrade, where practicable; (b) Under a service contract; (c) Under...

[Research on cleaning rate of the C-shaped canal treated by manual or rotary endodontic file combined with ultrasonic rinsing].

PubMed

Wang, Jing; Gao, Yan; Wang, Qing-shan; Zhang, Yan; Rong, Li; Wang, Jiu

2014-08-01

To evaluate the cleaning effect of the C-shaped canal treated by manual K file and ProTaper rotary endodontic file combined with ultrasonic cleaning, and find a better cleaning program for the C-shaped root canal. Fifty mandibular second molars were randomly divided into 5 groups: K file group, K file+ultrasonic rinsing group, ProTaper group, ProTaper+ultrasonic rinsing group and the control group. After initial shaping and cleaning, the mandibular second molars were soaked in formalin and stained. Under microscopy, the cleaning rate of necrotic tissue and cutting area were observed and analyzed. The data was processed with SPSS 17.0 software package. The cleaning rates of the treated groups were significantly higher than that of the control group (P<0.05); In each treatment group, the cleaning rate of the apex was significantly lower than that of the crown and central part (P<0.05); The cutting score of ProTaper+ultrasonic cleaning group was lower than that of the other treatment groups; The cutting score of the K file+ultrasonic rinsing group was significantly lower than that of the K file group (P<0.05); The cutting score and cleaning rate were negatively correlated (r=-0.712, P=0.000 ), the linear regression was the cleaning rate =98.325-4.325 × wall cutting score (R=0.454, P<0.05). In the process of shaping and cleaning of C-shaped canal, it is recommended that the ProTaper nickel-titanium rotary endodontic file should be chosen to clean the top of the taproot pipe and combined with ultrasonic rinsing to achieve better results.

Area navigation implementation for a microcomputer-based LORAN-C receiver

NASA Technical Reports Server (NTRS)

Oguri, F.

1983-01-01

Engineering performed to make LORAN-C a more useful and practical navigation system for general aviation is described. Development of new software, and implementation of this software on a (MOS6502) microcomputer to provide high quality practical area navigation information directly to the pilot and considered. Flight tests were performed specifically to examine the efficacy of this new software. Final results were exceptionally good and clearly demonstrate the merits of this new LORAN-C area navigation system.

The prostate after administration of anabolic androgenic steroids: a morphometrical study in rats.

PubMed

Vargas, Rafael Arêas; Oliveira, Leonardo Pires; Frankenfeld, Stephan; Souza, Diogo Benchimol de; Costa, Waldemar Silva; Favorito, Luciano Alves; Sampaio, Francisco José Barcellos

2013-01-01

Many adverse effects have been associated with abuse of anabolic-androgenic steroids (AAS), including disorders of the urogenital tract. The objective of this study is to analyze the morphological modifications in the prostate ventral lobe of pubertal and adult rats chronically treated with AAS, using morphometric methods. We studied 39 male Wistar rats weighing between 400 g and 550 g. The rats were divided into four groups: (a) control rats, with 105 days of age (C105) (n = 7); (b) control rats with 65 days of age (C65) (n = 9), injected only with the vehicle (peanut oil); (c) treated rats, with 105 days of age (T105) (n = 10) and (d) treated rats with 65 days of age (T65) (n = 13). The treated rats were injected with nandrolone decanoate at a dose of 10 mg.Kg-1 body weight. The steroid hormone and the vehicle were administered by intramuscular injection once a week for eight weeks. The rats were killed at 161 days of age (C105 and T105) and 121 days of age (C65 and T65) and the ventral prostate lobe was dissected and processed for histology. The height of the acinar epithelium, the surface densities of the lumen, epithelium and stroma were observed with X400 magnification using an Olympus light microscope coupled to a Sony CCD video camera, and the images transferred to a Sony monitor KX14-CP1. The selected histological areas were then quantified using the M42 test-grid system on the digitized fields. The data were analyzed with the Graphpad software. To compare the quantitative data in both groups (controls and treated) and the outcomes, Student's t-test was used (p < 0.05 was considered significant). The weight (p < 0.001) and volume (p = 0.004) of the prostate ventral lobe showed differences between C65 and T65 groups and between C105 and T105 groups. The epithelium height showed no difference between groups C65 and T65 (p = 0.8509), but the T105 group showed an increase of 32% compared to C105 (p = 0.0089). Concerning the lumen, surface density presented no difference between C65 and T65 (p = 0.9031) and a decrease of 19% for T105 compared to C105 (p = 0.0061). There was no difference in epithelium surface density between C65 and T65 (p = 0.7375), but it was 51% higher (p = 0.0065) in T105 compared with C105. Regarding stroma surface density, there were no differences between C65 and T65 or between C105 and T105. Finally, there was no difference in collagen pattern between C105 and T105, but T65 showed a predominance of collagen fibers compared to C65. The use of anabolic androgenic steroids in rats promotes structural changes in the prostate. We observed structural changes in the weight, volume and epithelium height of the prostate ventral lobe and a predominance of collagen fibers.

FPGA Coprocessor for Accelerated Classification of Images

NASA Technical Reports Server (NTRS)

Pingree, Paula J.; Scharenbroich, Lucas J.; Werne, Thomas A.

2008-01-01

An effort related to that described in the preceding article focuses on developing a spaceborne processing platform for fast and accurate onboard classification of image data, a critical part of modern satellite image processing. The approach again has been to exploit the versatility of recently developed hybrid Virtex-4FX field-programmable gate array (FPGA) to run diverse science applications on embedded processors while taking advantage of the reconfigurable hardware resources of the FPGAs. In this case, the FPGA serves as a coprocessor that implements legacy C-language support-vector-machine (SVM) image-classification algorithms to detect and identify natural phenomena such as flooding, volcanic eruptions, and sea-ice break-up. The FPGA provides hardware acceleration for increased onboard processing capability than previously demonstrated in software. The original C-language program demonstrated on an imaging instrument aboard the Earth Observing-1 (EO-1) satellite implements a linear-kernel SVM algorithm for classifying parts of the images as snow, water, ice, land, or cloud or unclassified. Current onboard processors, such as on EO-1, have limited computing power, extremely limited active storage capability and are no longer considered state-of-the-art. Using commercially available software that translates C-language programs into hardware description language (HDL) files, the legacy C-language program, and two newly formulated programs for a more capable expanded-linear-kernel and a more accurate polynomial-kernel SVM algorithm, have been implemented in the Virtex-4FX FPGA. In tests, the FPGA implementations have exhibited significant speedups over conventional software implementations running on general-purpose hardware.

gemcWeb: A Cloud Based Nuclear Physics Simulation Software

NASA Astrophysics Data System (ADS)

Markelon, Sam

2017-09-01

gemcWeb allows users to run nuclear physics simulations from the web. Being completely device agnostic, scientists can run simulations from anywhere with an Internet connection. Having a full user system, gemcWeb allows users to revisit and revise their projects, and share configurations and results with collaborators. gemcWeb is based on simulation software gemc, which is based on standard GEant4. gemcWeb requires no C++, gemc, or GEant4 knowledge. Using a simple but powerful GUI allows users to configure their project from geometries and configurations stored on the deployment server. Simulations are then run on the server, with results being posted to the user, and then securely stored. Python based and open-source, the main version of gemcWeb is hosted internally at Jefferson National Labratory and used by the CLAS12 and Electron-Ion Collider Project groups. However, as the software is open-source, and hosted as a GitHub repository, an instance can be deployed on the open web, or any institution's intra-net. An instance can be configured to host experiments specific to an institution, and the code base can be modified by any individual or group. Special thanks to: Maurizio Ungaro, PhD., creator of gemc; Markus Diefenthaler, PhD., advisor; and Kyungseon Joo, PhD., advisor.

Prime Contract Awards Alphabetically by Contractor, by State or Country, and Place, FY83, Part 9 (Smith S J Co Inc-Univar Corp).

DTIC Science & Technology

1983-01-01

PURPOSE 3 6 4 1 H LOCATION TOTAL 2 65 SOFIS EQUIPMENT CO TEXARKANA TEXAS 088852 7840 44 1 A OAG47 0059 DAAG47-83-CO022 0 C E 1 3 2 Y159 000 C2...8905 000 52 MEAT POULTRY AND FISH 6 2 3 5 J 09 1 B I I LOCATION TOTAL 19 1,205 SOFTWARE ASSOCIATES INC TEXARKANA TEXAS 018565 7840 44 1 I 0A347 0191...CONTRACTORS INC TEXARKANA TEXAS 070213 7840 44 1C 0AG47 0095 DAAG47-83-CO033 D C E 1 2 2 Z152 000 C2 MAINT-REPAIR-ALTER/MAINTENAN 8 A 3 4 J O1B I B J 1 C 132

[Comparison of the shear bond strength by using nano silica sol to zirconia basement and veneer porcelain].

PubMed

Wang, Si-qian; Zhang, Da-feng; Zhen, Tie-li; Yang, Jing-yuan; Lin, Ting-ting; Ma, Jian-feng

2016-04-01

To investigate the feasibility of using sol gel technique to produce thin layer nano silicon dioxide on zirconia ceramic surface and the effect of improving shear bond strength between zirconia and veneer porcelain. The presintered zirconia specimen was cut into a rectangle block piece (15 mm×10 mm×2.5 mm), a total of 40 pieces were obtained and divided into 4 groups, each group had 10 pieces. Four different treatments were used in each group respectively. Pieces in group A (control group) were only sintered at 1450°C to crystallization; pieces in group B underwent 30% nano silica sol infiltration first and then were sintered at 1450°C to crystallization; piece in group C underwent crystallization first at 1450°C, then 30% nano silica sol infiltration and were sintered at 1450°C again; pieces in group D was coated by nano silica sol and then sintered at 1450°C to crystallization; ten rectangle block pieces (12 mm×8 mm×2 mm) in group E were made. Cylinder veneers 5 mm in diameter and 4 mm in height were produced in each group and the shear bond strength was tested. Data were statistically analyzed by SPSS 19.0 software package. The shear bond strength of the 5 group specimens were: (28.12±2.95) MPa in group A, (31.09±3.94) MPa in group B, (25.60±2.45) MPa in group C, (31.75±4.90) MPa in group D, (28.67±3.95) MPa in group E, respectively. Significant differences existed between the 5 groups, and group C had significant difference compared with group B and D. CONCLUSIONS：① Use of nano silicon sol gel on presintered zirconia surface to make thin layer of nano silicon dioxide can improve the shear bond strength between zirconia and veneer; ②Using nano silicon sol gel on crystallization zirconia surface to make thin layer of nano silicon dioxide will decrease the shear bond strength between zirconia and veneer; ③ Zirconia veneer bilayer ceramic has the same shear bond strength with porcelain fused to Ni Cr alloy; ④Use of sol gel technique to produce thin layer nano silicon dioxide on zirconia ceramic surface is feasible and can improve shear bond strength between zirconia and veneer porcelain.

Accounting for Uncertainties in Strengths of SiC MEMS Parts

NASA Technical Reports Server (NTRS)

Nemeth, Noel; Evans, Laura; Beheim, Glen; Trapp, Mark; Jadaan, Osama; Sharpe, William N., Jr.

2007-01-01

A methodology has been devised for accounting for uncertainties in the strengths of silicon carbide structural components of microelectromechanical systems (MEMS). The methodology enables prediction of the probabilistic strengths of complexly shaped MEMS parts using data from tests of simple specimens. This methodology is intended to serve as a part of a rational basis for designing SiC MEMS, supplementing methodologies that have been borrowed from the art of designing macroscopic brittle material structures. The need for this or a similar methodology arises as a consequence of the fundamental nature of MEMS and the brittle silicon-based materials of which they are typically fabricated. When tested to fracture, MEMS and structural components thereof show wide part-to-part scatter in strength. The methodology involves the use of the Ceramics Analysis and Reliability Evaluation of Structures Life (CARES/Life) software in conjunction with the ANSYS Probabilistic Design System (PDS) software to simulate or predict the strength responses of brittle material components while simultaneously accounting for the effects of variability of geometrical features on the strength responses. As such, the methodology involves the use of an extended version of the ANSYS/CARES/PDS software system described in Probabilistic Prediction of Lifetimes of Ceramic Parts (LEW-17682-1/4-1), Software Tech Briefs supplement to NASA Tech Briefs, Vol. 30, No. 9 (September 2006), page 10. The ANSYS PDS software enables the ANSYS finite-element-analysis program to account for uncertainty in the design-and analysis process. The ANSYS PDS software accounts for uncertainty in material properties, dimensions, and loading by assigning probabilistic distributions to user-specified model parameters and performing simulations using various sampling techniques.

The Software Engineering Laboratory: An operational software experience factory

NASA Technical Reports Server (NTRS)

Basili, Victor R.; Caldiera, Gianluigi; Mcgarry, Frank; Pajerski, Rose; Page, Gerald; Waligora, Sharon

1992-01-01

For 15 years, the Software Engineering Laboratory (SEL) has been carrying out studies and experiments for the purpose of understanding, assessing, and improving software and software processes within a production software development environment at NASA/GSFC. The SEL comprises three major organizations: (1) NASA/GSFC, Flight Dynamics Division; (2) University of Maryland, Department of Computer Science; and (3) Computer Sciences Corporation, Flight Dynamics Technology Group. These organizations have jointly carried out several hundred software studies, producing hundreds of reports, papers, and documents, all of which describe some aspect of the software engineering technology that was analyzed in the flight dynamics environment at NASA. The studies range from small, controlled experiments (such as analyzing the effectiveness of code reading versus that of functional testing) to large, multiple project studies (such as assessing the impacts of Ada on a production environment). The organization's driving goal is to improve the software process continually, so that sustained improvement may be observed in the resulting products. This paper discusses the SEL as a functioning example of an operational software experience factory and summarizes the characteristics of and major lessons learned from 15 years of SEL operations.

Genetic analysis of autoimmune regulator haplotypes in alopecia areata.

PubMed

Wengraf, D A; McDonagh, A J G; Lovewell, T R J; Vasilopoulos, Y; Macdonald-Hull, S P; Cork, M J; Messenger, A G; Tazi-Ahnini, R

2008-03-01

Alopecia areata is an immune-mediated disorder, occurring with the highest observed frequency in the rare recessive autoimmune polyendocrinopathy-candidiasis-ectodermal dystrophy (APECED) syndrome caused by mutations of the autoimmune regulator (AIRE) gene on chromosome 21q22.3. We have previously detected association between alopecia areata and a single nucleotide polymorphism (SNP) in the AIRE gene in patients without APECED, and we now report the findings of an extended examination of the association of alopecia areata with haplotype analysis including six SNPs in the AIRE gene: C-103T, C4144G, T5238C, G6528A, T7215C and T11787C. In Caucasian groups of 295 patients and 363 controls, we found strong association between the AIRE 7215C allele and AA [P = 3.8 x 10(-8), OR (95% CI): 2.69 (1.8-4.0)]. The previously reported association between AA and the AIRE 4144G allele was no longer significant on correction for multiple testing. The AIRE haplotypes CCTGCT and CGTGCC showed a highly significant association with AA [P = 6.05 x 10(-6), 9.47 (2.91-30.8) and P = 0.001, 3.51 (1.55-7.95), respectively]. To select the haplotypes most informative for analysis, we tagged the polymorphisms using SNPTag software. Employing AIRE C-103T, G6528A, T7215C and T11787C as tag SNPs, two haplotypes were associated with AA; AIRE CGCT and AIRE CGCC [P = 3.84 x 10(-7), 11.40 (3.53-36.9) and P = 3.94 x 10(-4), 2.13 (1.39-3.24) respectively]. The AIRE risk haplotypes identified in this study potentially account for a major component of the genetic risk of developing alopecia areata.

FluxPyt: a Python-based free and open-source software for 13C-metabolic flux analyses.

PubMed

Desai, Trunil S; Srivastava, Shireesh

2018-01-01

13 C-Metabolic flux analysis (MFA) is a powerful approach to estimate intracellular reaction rates which could be used in strain analysis and design. Processing and analysis of labeling data for calculation of fluxes and associated statistics is an essential part of MFA. However, various software currently available for data analysis employ proprietary platforms and thus limit accessibility. We developed FluxPyt, a Python-based truly open-source software package for conducting stationary 13 C-MFA data analysis. The software is based on the efficient elementary metabolite unit framework. The standard deviations in the calculated fluxes are estimated using the Monte-Carlo analysis. FluxPyt also automatically creates flux maps based on a template for visualization of the MFA results. The flux distributions calculated by FluxPyt for two separate models: a small tricarboxylic acid cycle model and a larger Corynebacterium glutamicum model, were found to be in good agreement with those calculated by a previously published software. FluxPyt was tested in Microsoft™ Windows 7 and 10, as well as in Linux Mint 18.2. The availability of a free and open 13 C-MFA software that works in various operating systems will enable more researchers to perform 13 C-MFA and to further modify and develop the package.

FluxPyt: a Python-based free and open-source software for 13C-metabolic flux analyses

PubMed Central

Desai, Trunil S.

2018-01-01

13C-Metabolic flux analysis (MFA) is a powerful approach to estimate intracellular reaction rates which could be used in strain analysis and design. Processing and analysis of labeling data for calculation of fluxes and associated statistics is an essential part of MFA. However, various software currently available for data analysis employ proprietary platforms and thus limit accessibility. We developed FluxPyt, a Python-based truly open-source software package for conducting stationary 13C-MFA data analysis. The software is based on the efficient elementary metabolite unit framework. The standard deviations in the calculated fluxes are estimated using the Monte-Carlo analysis. FluxPyt also automatically creates flux maps based on a template for visualization of the MFA results. The flux distributions calculated by FluxPyt for two separate models: a small tricarboxylic acid cycle model and a larger Corynebacterium glutamicum model, were found to be in good agreement with those calculated by a previously published software. FluxPyt was tested in Microsoft™ Windows 7 and 10, as well as in Linux Mint 18.2. The availability of a free and open 13C-MFA software that works in various operating systems will enable more researchers to perform 13C-MFA and to further modify and develop the package. PMID:29736347

TAP II Beamforming System Software Final Report

DTIC Science & Technology

1977-05-01

3.0 IBM TAPE FORMATS......... ............. -1 • 3 . 2 C om p le x C o e f f ic i e n t 8 . *.. . o t... . . . . . . .. . . . . . . . 3 - 5 :i • 3.3...parameters. Output to the line - printer and CRT are inhibited, but the IBM tapes are written. d Li UNCLASSIFIED CONFIDENTIALI A2 2.5 (C) EDITING (U...t• •• ", .. . .. . ..•" ;"• :, • .••.•-. ~ ., ~ ,., ,~.’ " ’t••. •± CONFIDENTIAL LI 3.0 (C) IBM TAPE FORMATS (U) .B 3.1 (U) GENERAL

A versatile nondestructive evaluation imaging workstation

NASA Technical Reports Server (NTRS)

Chern, E. James; Butler, David W.

1994-01-01

Ultrasonic C-scan and eddy current imaging systems are of the pointwise type evaluation systems that rely on a mechanical scanner to physically maneuver a probe relative to the specimen point by point in order to acquire data and generate images. Since the ultrasonic C-scan and eddy current imaging systems are based on the same mechanical scanning mechanisms, the two systems can be combined using the same PC platform with a common mechanical manipulation subsystem and integrated data acquisition software. Based on this concept, we have developed an IBM PC-based combined ultrasonic C-scan and eddy current imaging system. The system is modularized and provides capacity for future hardware and software expansions. Advantages associated with the combined system are: (1) eliminated duplication of the computer and mechanical hardware, (2) unified data acquisition, processing and storage software, (3) reduced setup time for repetitious ultrasonic and eddy current scans, and (4) improved system efficiency. The concept can be adapted to many engineering systems by integrating related PC-based instruments into one multipurpose workstation such as dispensing, machining, packaging, sorting, and other industrial applications.

A versatile nondestructive evaluation imaging workstation

NASA Astrophysics Data System (ADS)

Chern, E. James; Butler, David W.

1994-02-01

Ultrasonic C-scan and eddy current imaging systems are of the pointwise type evaluation systems that rely on a mechanical scanner to physically maneuver a probe relative to the specimen point by point in order to acquire data and generate images. Since the ultrasonic C-scan and eddy current imaging systems are based on the same mechanical scanning mechanisms, the two systems can be combined using the same PC platform with a common mechanical manipulation subsystem and integrated data acquisition software. Based on this concept, we have developed an IBM PC-based combined ultrasonic C-scan and eddy current imaging system. The system is modularized and provides capacity for future hardware and software expansions. Advantages associated with the combined system are: (1) eliminated duplication of the computer and mechanical hardware, (2) unified data acquisition, processing and storage software, (3) reduced setup time for repetitious ultrasonic and eddy current scans, and (4) improved system efficiency. The concept can be adapted to many engineering systems by integrating related PC-based instruments into one multipurpose workstation such as dispensing, machining, packaging, sorting, and other industrial applications.

Big Software for SmallSats: Adapting cFS to CubeSat Missions

NASA Technical Reports Server (NTRS)

Cudmore, Alan P.; Crum, Gary Alex; Sheikh, Salman; Marshall, James

2015-01-01

Expanding capabilities and mission objectives for SmallSats and CubeSats is driving the need for reliable, reusable, and robust flight software. While missions are becoming more complicated and the scientific goals more ambitious, the level of acceptable risk has decreased. Design challenges are further compounded by budget and schedule constraints that have not kept pace. NASA's Core Flight Software System (cFS) is an open source solution which enables teams to build flagship satellite level flight software within a CubeSat schedule and budget. NASA originally developed cFS to reduce mission and schedule risk for flagship satellite missions by increasing code reuse and reliability. The Lunar Reconnaissance Orbiter, which launched in 2009, was the first of a growing list of Class B rated missions to use cFS.

eSciMart: Web Platform for Scientific Software Marketplace

NASA Astrophysics Data System (ADS)

Kryukov, A. P.; Demichev, A. P.

2016-10-01

In this paper we suggest a design of a web marketplace where users of scientific application software and databases, presented in the form of web services, as well as their providers will have presence simultaneously. The model, which will be the basis for the web marketplace is close to the customer-to-customer (C2C) model, which has been successfully used, for example, on the auction sites such as eBay (ebay.com). Unlike the classical model of C2C the suggested marketplace focuses on application software in the form of web services, and standardization of API through which application software will be integrated into the web marketplace. A prototype of such a platform, entitled eSciMart, is currently being developed at SINP MSU.

Advantages of Repeated Low Dose against Single High Dose of Kainate in C57BL/6J Mouse Model of Status Epilepticus: Behavioral and Electroencephalographic Studies

PubMed Central

Beamer, Edward; Sills, Graeme J.; Thippeswamy, Thimmasettappa

2014-01-01

A refined kainate (KA) C57BL/6J mouse model of status epilepticus (SE) using a repeated low dose (RLD) of KA (5 mg/kg, intraperitoneal; at 30 min intervals) was compared with the established single high dose (SHD) of KA (20 mg/kg, intraperitoneal) model. In the RLD group, increased duration of convulsive motor seizures (CMS, Racine scale stage ≥3) with a significant reduction in mortality from 21% to 6% and decreased variability in seizure severity between animals/batches were observed when compared to the SHD group. There was a significant increase in the percentage of animals that reached stage-5 seizures (65% versus 96%) in the RLD group. Integrated real-time video-EEG analysis of both groups, using NeuroScore software, revealed stage-specific spikes and power spectral density characteristics. When the seizures progressed from non-convulsive seizures (NCS, stage 1–2) to CMS (stage 3–5), the delta power decreased which was followed by an increase in gamma and beta power. A transient increase in alpha and sigma power marked the transition from NCS to CMS with characteristic ‘high frequency trigger’ spikes on the EEG, which had no behavioral expression. During SE the spike rate was higher in the RLD group than in the SHD group. Overall these results confirm that RLD of KA is a more robust and consistent mouse model of SE than the SHD of KA mouse model. PMID:24802808

ibex: An open infrastructure software platform to facilitate collaborative work in radiomics

PubMed Central

Zhang, Lifei; Fried, David V.; Fave, Xenia J.; Hunter, Luke A.; Court, Laurence E.

2015-01-01

Purpose: Radiomics, which is the high-throughput extraction and analysis of quantitative image features, has been shown to have considerable potential to quantify the tumor phenotype. However, at present, a lack of software infrastructure has impeded the development of radiomics and its applications. Therefore, the authors developed the imaging biomarker explorer (ibex), an open infrastructure software platform that flexibly supports common radiomics workflow tasks such as multimodality image data import and review, development of feature extraction algorithms, model validation, and consistent data sharing among multiple institutions. Methods: The ibex software package was developed using the matlab and c/c++ programming languages. The software architecture deploys the modern model-view-controller, unit testing, and function handle programming concepts to isolate each quantitative imaging analysis task, to validate if their relevant data and algorithms are fit for use, and to plug in new modules. On one hand, ibex is self-contained and ready to use: it has implemented common data importers, common image filters, and common feature extraction algorithms. On the other hand, ibex provides an integrated development environment on top of matlab and c/c++, so users are not limited to its built-in functions. In the ibex developer studio, users can plug in, debug, and test new algorithms, extending ibex’s functionality. ibex also supports quality assurance for data and feature algorithms: image data, regions of interest, and feature algorithm-related data can be reviewed, validated, and/or modified. More importantly, two key elements in collaborative workflows, the consistency of data sharing and the reproducibility of calculation result, are embedded in the ibex workflow: image data, feature algorithms, and model validation including newly developed ones from different users can be easily and consistently shared so that results can be more easily reproduced between institutions. Results: Researchers with a variety of technical skill levels, including radiation oncologists, physicists, and computer scientists, have found the ibex software to be intuitive, powerful, and easy to use. ibex can be run at any computer with the windows operating system and 1GB RAM. The authors fully validated the implementation of all importers, preprocessing algorithms, and feature extraction algorithms. Windows version 1.0 beta of stand-alone ibex and ibex’s source code can be downloaded. Conclusions: The authors successfully implemented ibex, an open infrastructure software platform that streamlines common radiomics workflow tasks. Its transparency, flexibility, and portability can greatly accelerate the pace of radiomics research and pave the way toward successful clinical translation. PMID:25735289

IBEX: an open infrastructure software platform to facilitate collaborative work in radiomics.

PubMed

Zhang, Lifei; Fried, David V; Fave, Xenia J; Hunter, Luke A; Yang, Jinzhong; Court, Laurence E

2015-03-01

Radiomics, which is the high-throughput extraction and analysis of quantitative image features, has been shown to have considerable potential to quantify the tumor phenotype. However, at present, a lack of software infrastructure has impeded the development of radiomics and its applications. Therefore, the authors developed the imaging biomarker explorer (IBEX), an open infrastructure software platform that flexibly supports common radiomics workflow tasks such as multimodality image data import and review, development of feature extraction algorithms, model validation, and consistent data sharing among multiple institutions. The IBEX software package was developed using the MATLAB and c/c++ programming languages. The software architecture deploys the modern model-view-controller, unit testing, and function handle programming concepts to isolate each quantitative imaging analysis task, to validate if their relevant data and algorithms are fit for use, and to plug in new modules. On one hand, IBEX is self-contained and ready to use: it has implemented common data importers, common image filters, and common feature extraction algorithms. On the other hand, IBEX provides an integrated development environment on top of MATLAB and c/c++, so users are not limited to its built-in functions. In the IBEX developer studio, users can plug in, debug, and test new algorithms, extending IBEX's functionality. IBEX also supports quality assurance for data and feature algorithms: image data, regions of interest, and feature algorithm-related data can be reviewed, validated, and/or modified. More importantly, two key elements in collaborative workflows, the consistency of data sharing and the reproducibility of calculation result, are embedded in the IBEX workflow: image data, feature algorithms, and model validation including newly developed ones from different users can be easily and consistently shared so that results can be more easily reproduced between institutions. Researchers with a variety of technical skill levels, including radiation oncologists, physicists, and computer scientists, have found the IBEX software to be intuitive, powerful, and easy to use. IBEX can be run at any computer with the windows operating system and 1GB RAM. The authors fully validated the implementation of all importers, preprocessing algorithms, and feature extraction algorithms. Windows version 1.0 beta of stand-alone IBEX and IBEX's source code can be downloaded. The authors successfully implemented IBEX, an open infrastructure software platform that streamlines common radiomics workflow tasks. Its transparency, flexibility, and portability can greatly accelerate the pace of radiomics research and pave the way toward successful clinical translation.

Use of a Real-Time Training Software (Laerdal QCPR®) Compared to Instructor-Based Feedback for High-Quality Chest Compressions Acquisition in Secondary School Students: A Randomized Trial.

PubMed

Cortegiani, Andrea; Russotto, Vincenzo; Montalto, Francesca; Iozzo, Pasquale; Meschis, Roberta; Pugliesi, Marinella; Mariano, Dario; Benenati, Vincenzo; Raineri, Santi Maurizio; Gregoretti, Cesare; Giarratano, Antonino

2017-01-01

High-quality chest compressions are pivotal to improve survival from cardiac arrest. Basic life support training of school students is an international priority. The aim of this trial was to assess the effectiveness of a real-time training software (Laerdal QCPR®) compared to a standard instructor-based feedback for chest compressions acquisition in secondary school students. After an interactive frontal lesson about basic life support and high quality chest compressions, 144 students were randomized to two types of chest compressions training: 1) using Laerdal QCPR® (QCPR group- 72 students) for real-time feedback during chest compressions with the guide of an instructor who considered software data for students' correction 2) based on standard instructor-based feedback (SF group- 72 students). Both groups had a minimum of a 2-minute chest compressions training session. Students were required to reach a minimum technical skill level before the evaluation. We evaluated all students at 7 days from the training with a 2-minute chest compressions session. The primary outcome was the compression score, which is an overall measure of chest compressions quality calculated by the software expressed as percentage. 125 students were present at the evaluation session (60 from QCPR group and 65 from SF group). Students in QCPR group had a significantly higher compression score (median 90%, IQR 81.9-96.0) compared to SF group (median 67%, IQR 27.7-87.5), p = 0.0003. Students in QCPR group performed significantly higher percentage of fully released chest compressions (71% [IQR 24.5-99.0] vs 24% [IQR 2.5-88.2]; p = 0.005) and better chest compression rate (117.5/min [IQR 106-123.5] vs 125/min [115-135.2]; p = 0.001). In secondary school students, a training for chest compressions based on a real-time feedback software (Laerdal QCPR®) guided by an instructor is superior to instructor-based feedback training in terms of chest compression technical skill acquisition. Australian New Zealand Clinical Trials Registry ACTRN12616000383460.

MILCOM II. Military Computers and Software. Finding a Partnership - Department of Defense/Industry/Congress for the Information Age. Proceedings of Conference, Arlington, Virginia on 27-28 January 1983.

DTIC Science & Technology

1983-01-01

use VLSI with agreement on functions and interfaces. We will have a lead by the time VHSIC is available. A thought on possible packaging is a grouping ...Anthony R. Battista House Committee on Armed Services Dr. Robert Couranz Raytheon Company Mr. Barry C. DeRoze TRW Defense Space Systems Group Mr. Parker...Electronics Mr. Donald A. Sacarob Litton-AmecomMr. William G. Schmick Hewlett-Packard Co. Mr. James M. Shangle US Navy Mr. William R. Smith US Navy Mr. James F

More Than A SketchUp

NASA Technical Reports Server (NTRS)

Davis, Derrick D.

2014-01-01

This 2014 summer internship assignment at John F. Kennedy Space Center (K.S.C) was conducted with the National Aeronautics and Space Administration (NASA) Engineering and Technology (NE) group in support of the Control and Data Systems Division (NE-C) within the Test, Operations & Support Software Engineering Branch (NE-C2). The primary focus of this project was to assist Branch Chief Laurie B. Griffin, to support NASA's Small Payload Launch Integrated Testing Services (SPLITS) mission, by mastering the capabilities of 3-D modeling software called SketchUp. I used SketchUp to create a virtual environment for different laboratories of the NE-00 Division. My mission was to have these models uploaded into a K.S.C Partnerships Website and be used as a visual aid to viewers who browsed the site. The leads of this project were Kay L. Craig, Business and Industry Specialist (AD-A) and Steven E. Cain, (FA-C). I teamed with fellow intern Tait Sorenson of the Flight Structures and Thermal Protection Systems Branch (NE-M5) and met with many K.S.C lab managers willing to display their lab's structure and capabilities. The information collected during these lab tours was vital to the building of the K.S.C Partnerships Website. To accomplish this goal Sorenson and I later teamed with fellow Marketing intern Marlee Pereda-Ramos, of the Spaceport Planning Office In Center Planning And Development (AD-A) Along with Ramos, Tait and I toured an array of laboratories and got first hand exposure to their functions and capabilities.

Three-dimensional echocardiographic measurements using automated quantification software for big data processing.

PubMed

Feng, Cheng; Chen, Lixin; Li, Jian; Wang, Jiangtao; Dong, Fajin; Xu, Jinfeng

2017-01-01

To compare a full-automated software to quantify 3D transthoracic echocardiography namely, 3DE-HM (three-dimensional echocardiography HeartModel, Philips Healthcare) with the traditional manual quantitative method (3DE-manual) for assessing volumes of left atrial and ventricular volumes, and left ventricular ejection fraction (LVEF). 3D full volume images acquired from 156 subjects were collected and divided into 3 groups, which include 70 normal control cases (Group A), 17 patients with left ventricular remodeling after acute myocardial infarction (AMI) (Group B), and 69 patients with left atrial remodeling secondary to hypertension (Group C). The 3DE-HM method was used to quantify left ventricular end-diastolic volume (LVEDV), left ventricular end-systolic volume (LVESV), left atrial end-systolic volume (LAESV), and left ventricular ejection fraction (LVEF), respectively. The results were compared with those obtained with the 3DE-manual method for correlation and consistency analyses. The reproducibility of the 3DE-HM method was also evaluated. There was a high correlation between LVEDV, LVESV, LAESV and LVEF values obtained with the 3DE-HM method and those obtained using the 3DE-manual method (r = 0.72 to 0.97). The correlation was strongest for Group B, patients with left ventricular remodeling post-AMI also demonstrated the greatest degree of morphologic changes. There was a significant difference in all parameters measured with the 3DE-HM method in different groups (P < 0.05). The difference in the measurements of LVEDV and LVESV between the two methods was greatest in patients in Group B compared with patients with hypertension-induced left ventricular remodeling (Group C) and in normal controls (Group A) (P < 0.05). Lastly, the difference in the measurement of LAESV between the two methods was greater in patients with hypertension-induced left ventricular remodeling (Group C) than that in the control group (Group A) (P < 0.05). The post-processing time of the 3DE-HM data was significantly shorter than that using the 3DE-manual method (P < 0.05). There was no significant variability in repeated measurements at different time points using the 3DE-HM method either between subjects in different groups or within the same subject. 3DE-HM is a quick and feasible method for left ventricular quantification and is clinically applicable for evaluating patients with left atrial and left ventricular remodeling.

Ruggedized minicomputer hardware and software topics, 1981: Proceedings of the 4th ROLM MIL-SPEC Computer User's Group Conference

NASA Technical Reports Server (NTRS)

1981-01-01

Presentations of a conference on the use of ruggedized minicomputers are summarized. The following topics are discussed: (1) the role of minicomputers in the development and/or certification of commercial or military airplanes in both the United States and Europe; (2) generalized software error detection techniques; (3) real time software development tools; (4) a redundancy management research tool for aircraft navigation/flight control sensors; (5) extended memory management techniques using a high order language; and (6) some comments on establishing a system maintenance scheme. Copies of presentation slides are also included.

Ionospheric Remote Sensing using GPS Radio Occultation and Ultraviolet Photometry aboard the ISS

NASA Astrophysics Data System (ADS)

Budzien, S. A.; Powell, S. P.; O'Hanlon, B.; Humphreys, T.; Bishop, R. L.; Stephan, A. W.; Gross, J.; Chakrabarti, S.

2017-12-01

The GPS Radio Occultation and Ultraviolet Photometer Co-located (GROUP-C) experiment launched to the International Space Station (ISS) on February 19, 2017 as part of the Space Test Program Houston #5 payload (STP-H5). After early orbit testing, GROUP-C began routine science operations in late April. GROUP-C includes a high-sensitivity far-ultraviolet photometer measuring horizontal nighttime ionospheric gradients and an advanced software-defined GPS receiver providing ionospheric electron density profiles, scintillation measurements, and lower atmosphere profiles. GROUP-C and a companion experiment, the Limb-Imaging Ionospheric and Thermospheric Extreme-Ultraviolet Spectrograph (LITES), offer a unique capability to study spatial and temporal variability of the thermosphere and ionosphere using multi-sensor approaches, including ionospheric tomography. Data are collected continuously across low- and mid-latitudes as the ISS orbit precesses through all local times every 60 days. The GROUP-C GPS sensor routinely collects dual-frequency GPS occultations, makes targeted raw signal captures of GPS and Galileo occultations, and includes multiple antennas to characterize multipath in the ISS environment. The UV photometer measures the 135.6 nm ionospheric recombination airglow emision along the nightside orbital track. We present the first analysis of ionospheric observations, discuss the challenges and opportunities of remote sensing from the ISS platform, and explore how these new data help address questions regarding the complex and dynamic features of the low and middle latitude ionosphere-thermosphere relevant to the upcoming GOLD and ICON missions.

DMPL: Programming and Verifying Distributed Mixed Synchrony and Mixed Critical Software

DTIC Science & Technology

2016-06-16

ference on Intelligent Robots and Systems, pages 1495–1502, Chicago, IL, September 2014. IEEE Computer Society. [21] MADARA website . http://sourceforge.net...4.6 DMPL program for 5- robot reconnaissance example 19 Figure 5.1 Generated C++ code for example DMPL program. In practice, local vari- ables (lines...examples of collision avoidance in multi- robot systems. CMU/SEI-2016-TR-005 | SOFTWARE ENGINEERING INSTITUTE | Carnegie Mellon University vii

Mixed-Integer Conic Linear Programming: Challenges and Perspectives

DTIC Science & Technology

2013-10-01

The novel DCCs for MISOCO may be used in branch- and-cut algorithms when solving MISOCO problems. The experimental software CICLO was developed to...perform limited, but rigorous computational experiments. The CICLO solver utilizes continuous SOCO solvers, MOSEK, CPLES or SeDuMi, builds on the open...submitted Fall 2013. Software: 1. CICLO : Integer conic linear optimization package. Authors: J.C. Góez, T.K. Ralphs, Y. Fu, and T. Terlaky

Sequence System Building Blocks: Using a Component Architecture for Sequencing Software

NASA Technical Reports Server (NTRS)

Streiffert, Barbara A.; O'Reilly, Taifun

2005-01-01

Over the last few years software engineering has made significant strides in making more flexible architectures and designs possible. However, at the same time, spacecraft have become more complex and flight software has become more sophisticated. Typically spacecraft are often one-of-a-kind entities that have different hardware designs, different capabilities, different instruments, etc. Ground software has become more complex and operations teams have had to learn a myriad of tools that all have different user interfaces and represent data in different ways. At Jet Propulsion Laboratory (JPL) these themes have collided to require an new approach to producing ground system software. Two different groups have been looking at tackling this particular problem. One group is working for the JPL Mars Technology Program in the Mars Science Laboratory (MSL) Focused Technology area. The other group is the JPL Multi-Mission Planning and Sequencing Group . The major concept driving these two approaches on a similar path is to provide software that can be a more cohesive flexible system that provides a act of planning and sequencing system of services. This paper describes the efforts that have been made to date to create a unified approach from these disparate groups.

Sequencing System Building Blocks: Using a Component Architecture for Sequencing Software

NASA Technical Reports Server (NTRS)

Streiffert, Barbara A.; O'Reilly, Taifun

2006-01-01

Over the last few years software engineering has made significant strides in making more flexible architectures and designs possible. However, at the same time, spacecraft have become more complex and flight software has become more sophisticated. Typically spacecraft are often one-of-a-kind entities that have different hardware designs, different capabilities, different instruments, etc. Ground software has become more complex and operations teams have had to learn a myriad of tools that all have different user interfaces and represent data in different ways. At Jet Propulsion Laboratory (JPL) these themes have collided to require a new approach to producing ground system software. Two different groups have been looking at tackling this particular problem. One group is working for the JPL Mars Technology Program in the Mars Science Laboratory (MSL) Focused Technology area. The other group is the JPL Multi-Mission Planning and Sequencing Group. The major concept driving these two approaches on a similar path is to provide software that can be a more cohesive flexible system that provides a set of planning and sequencing system of services. This paper describes the efforts that have been made to date to create a unified approach from these disparate groups.

Future Standardization of Space Telecommunications Radio System with Core Flight System

NASA Technical Reports Server (NTRS)

Briones, Janette C.; Hickey, Joseph P.; Roche, Rigoberto; Handler, Louis M.; Hall, Charles S.

2016-01-01

NASA Glenn Research Center (GRC) is integrating the NASA Space Telecommunications Radio System (STRS) Standard with the Core Flight System (cFS), an avionics software operating environment. The STRS standard provides a common, consistent framework to develop, qualify, operate and maintain complex, reconfigurable and reprogrammable radio systems. The cFS is a flexible, open architecture that features a plugand- play software executive called the Core Flight Executive (cFE), a reusable library of software components for flight and space missions and an integrated tool suite. Together, STRS and cFS create a development environment that allows for STRS compliant applications to reference the STRS application programmer interfaces (APIs) that use the cFS infrastructure. These APIs are used to standardize the communication protocols on NASAs space SDRs. The cFS-STRS Operating Environment (OE) is a portable cFS library, which adds the ability to run STRS applications on existing cFS platforms. The purpose of this paper is to discuss the cFS-STRS OE prototype, preliminary experimental results performed using the Advanced Space Radio Platform (ASRP), the GRC S- band Ground Station and the SCaN (Space Communication and Navigation) Testbed currently flying onboard the International Space Station (ISS). Additionally, this paper presents a demonstration of the Consultative Committee for Space Data Systems (CCSDS) Spacecraft Onboard Interface Services (SOIS) using electronic data sheets (EDS) inside cFE. This configuration allows for the data sheets to specify binary formats for data exchange between STRS applications. The integration of STRS with cFS leverages mission-proven platform functions and mitigates barriers to integration with future missions. This reduces flight software development time and the costs of software-defined radio (SDR) platforms. Furthermore, the combined benefits of STRS standardization with the flexibility of cFS provide an effective, reliable and modular framework to minimize software development efforts for spaceflight missions.

Spacecraft Trajectory Analysis and Mission Planning Simulation (STAMPS) Software

NASA Technical Reports Server (NTRS)

Puckett, Nancy; Pettinger, Kris; Hallstrom,John; Brownfield, Dana; Blinn, Eric; Williams, Frank; Wiuff, Kelli; McCarty, Steve; Ramirez, Daniel; Lamotte, Nicole;

Increase Return on Investment of Software Development Life Cycle by Managing the Risk - A Case Study

DTIC Science & Technology

2015-04-01

for increasing the return on investment during the Software Development Life Cycle ( SDLC ) through selected quantitative analyses employing both the...defect rate, return on investment (ROI), software development life cycle ( SDLC ) DE FE N SE A C Q U IS IT IO N UN IVERSITY ALU M N I A SSO C IATIO N R...becomes comfortable due to its intricacies and learning cycle. The same may be said with respect to software development life cycle ( SDLC ) management

MouseNet database: digital management of a large-scale mutagenesis project.

PubMed

Pargent, W; Heffner, S; Schäble, K F; Soewarto, D; Fuchs, H; Hrabé de Angelis, M

2000-07-01

The Munich ENU Mouse Mutagenesis Screen is a large-scale mutant production, phenotyping, and mapping project. It encompasses two animal breeding facilities and a number of screening groups located in the general area of Munich. A central database is required to manage and process the immense amount of data generated by the mutagenesis project. This database, which we named MouseNet(c), runs on a Sybase platform and will finally store and process all data from the entire project. In addition, the system comprises a portfolio of functions needed to support the workflow management of the core facility and the screening groups. MouseNet(c) will make all of the data available to the participating screening groups, and later to the international scientific community. MouseNet(c) will consist of three major software components:* Animal Management System (AMS)* Sample Tracking System (STS)* Result Documentation System (RDS)MouseNet(c) provides the following major advantages:* being accessible from different client platforms via the Internet* being a full-featured multi-user system (including access restriction and data locking mechanisms)* relying on a professional RDBMS (relational database management system) which runs on a UNIX server platform* supplying workflow functions and a variety of plausibility checks.

Effect of methanolic extract of Piper sarmentosum leaves on neointimal foam cell infiltration in rabbits fed with high cholesterol diet

PubMed Central

Amran, Adel A.; Zakaria, Zaiton; Othman, Faizah; Das, Srijit; Al-Mekhlafi, Hesham M.; Raj, Santhana; Nordin, Nor-Anita MM

2012-01-01

Previous research has shown the beneficial effects of aqueous extract of Piper sarmentosum (P.s) on atherosclerosis. The first stage in atherosclerosis is the formation of foam cell. The aim of this study was to investigate the effect of the methanol extract of P.s on fatty streaks by calculating neointimal foam cell infiltration in rabbits fed with high cholesterol diet. Thirty six male New Zealand white rabbits were divided equally into six groups: (i) C: control group fed normal rabbit chow; (ii) CH: cholesterol diet (1 % cholesterol); (iii) PM1: 1 % cholesterol with methanol extract of P.s (62.5 mg/kg); (iv) PM2: 1 % cholesterol with methanol extract of P.s (125 mg/kg); (v) PM3: 1 % cholesterol with methanol extract of P.s (250 mg/kg); (vi) SMV group fed 1 % cholesterol supplemented with Simvistatin drug (1.2 mg/kg). All animals were treated for 10 weeks. At the end of the treatment, the rabbits were fasted and sacrificed and the aortic tissues were collected for histological studies to measure the area of the neointimal foam cell infiltration using software. The thickening of intima ratio of atherosclerosis and morphological changes by scanning electron microscope were measured. The results showed that the atherosclerotic group had significantly bigger area of fatty streak compared to the control group. The area of fatty streak in the abdominal aorta was significantly reduced in the treatment groups which were similar with the SMV group. Similarly, there was a reduction in the number of foam cell in the treatment groups compared to the atherosclerotic group as seen under scanning microscope. In conclusion, histological study demonstrated that the methanol extract of the P.s could reduce the neointimal foam cell infiltration in the lumen of the aorta and the atherosclerotic lesion. PMID:27366140

CPE--A New Perspective: The Impact of the Technology Revolution. Proceedings of the Computer Performance Evaluation Users Group Meeting (19th, San Francisco, California, October 25-28, 1983). Final Report. Reports on Computer Science and Technology.

ERIC Educational Resources Information Center

Mobray, Deborah, Ed.

Papers on local area networks (LANs), modelling techniques, software improvement, capacity planning, software engineering, microcomputers and end user computing, cost accounting and chargeback, configuration and performance management, and benchmarking presented at this conference include: (1) "Theoretical Performance Analysis of Virtual…

Software Architecture for Anti-Submarine Warfare Unmanned Surface Vehicles

DTIC Science & Technology

2016-09-01

discussion about software systems that could be used to control these systems to make the jobs of the human operators easier. B. RESEARCH QUESTIONS... research study. To better understand the role of artificial intelligence in designing autonomous systems, S. Russell and P. Norvig jointly authored a...artificial intelligence, and autonomous systems. This serves as the framework for the real design challenge. 1. Protecting the Battle Group The United

Association between the HFE C282Y, H63D Polymorphisms and the Risks of Non-Alcoholic Fatty Liver Disease, Liver Cirrhosis and Hepatocellular Carcinoma: An Updated Systematic Review and Meta-Analysis of 5,758 Cases and 14,741 Controls

PubMed Central

Yin, Wei-Li; Wang, Feng-Mei; Han, Tao

2016-01-01

Background Conflicting results have been obtained for the association between two common polymorphisms (C282Y, H63D) of human HFE (hereditary hemochromatosis) gene and the risks of the liver diseases, including non-alcoholic fatty liver disease (NAFLD), liver cirrhosis and hepatocellular carcinoma (HCC). Methods An updated systematic review and meta-analysis was conducted to evaluate the potential role of HFE polymorphisms in the susceptibility to NAFLD, liver cirrhosis and HCC. After retrieving articles from online databases, eligible studies were enrolled according to the selection criteria. Stata/SE 12.0 software was utilized to perform the statistical analysis. Results In total, 43 articles with 5,758 cases and 14,741 controls were selected. Compared with the control group, a significantly increased risk of NAFLD was observed for the C282Y polymorphism in the Caucasian population under all genetic models and for the H63D polymorphism under the allele, heterozygote and dominant models (all OR>1, Passociation<0.05). However, no significant difference between liver cirrhosis cases and the control group was observed for HFE C282Y and H63D (all Passociation>0.05). In addition, we found that HFE C282Y was statistically associated with increased HCC susceptibility in the overall population, while H63D increased the odds of developing non-cirrhotic HCC in the African population (all OR>1, Passociation<0.05). Moreover, a positive association between compound heterozygosity for C282Y/H63D and the risk of NAFLD and HCC, but not liver cirrhosis, was observed. Conclusion Our meta-analysis provides evidence that the HFE C282Y and H63D polymorphisms confer increased genetic susceptibility to NAFLD and HCC but not liver cirrhosis. Additional well-powered studies are required to confirm our conclusion. PMID:27657935

Closing gaps between open software and public data in a hackathon setting: User-centered software prototyping.

PubMed

Busby, Ben; Lesko, Matthew; Federer, Lisa

2016-01-01

In genomics, bioinformatics and other areas of data science, gaps exist between extant public datasets and the open-source software tools built by the community to analyze similar data types.  The purpose of biological data science hackathons is to assemble groups of genomics or bioinformatics professionals and software developers to rapidly prototype software to address these gaps.  The only two rules for the NCBI-assisted hackathons run so far are that 1) data either must be housed in public data repositories or be deposited to such repositories shortly after the hackathon's conclusion, and 2) all software comprising the final pipeline must be open-source or open-use.  Proposed topics, as well as suggested tools and approaches, are distributed to participants at the beginning of each hackathon and refined during the event.  Software, scripts, and pipelines are developed and published on GitHub, a web service providing publicly available, free-usage tiers for collaborative software development. The code resulting from each hackathon is published at https://github.com/NCBI-Hackathons/ with separate directories or repositories for each team.

IPO: a tool for automated optimization of XCMS parameters.

PubMed

Libiseller, Gunnar; Dvorzak, Michaela; Kleb, Ulrike; Gander, Edgar; Eisenberg, Tobias; Madeo, Frank; Neumann, Steffen; Trausinger, Gert; Sinner, Frank; Pieber, Thomas; Magnes, Christoph

2015-04-16

Untargeted metabolomics generates a huge amount of data. Software packages for automated data processing are crucial to successfully process these data. A variety of such software packages exist, but the outcome of data processing strongly depends on algorithm parameter settings. If they are not carefully chosen, suboptimal parameter settings can easily lead to biased results. Therefore, parameter settings also require optimization. Several parameter optimization approaches have already been proposed, but a software package for parameter optimization which is free of intricate experimental labeling steps, fast and widely applicable is still missing. We implemented the software package IPO ('Isotopologue Parameter Optimization') which is fast and free of labeling steps, and applicable to data from different kinds of samples and data from different methods of liquid chromatography - high resolution mass spectrometry and data from different instruments. IPO optimizes XCMS peak picking parameters by using natural, stable (13)C isotopic peaks to calculate a peak picking score. Retention time correction is optimized by minimizing relative retention time differences within peak groups. Grouping parameters are optimized by maximizing the number of peak groups that show one peak from each injection of a pooled sample. The different parameter settings are achieved by design of experiments, and the resulting scores are evaluated using response surface models. IPO was tested on three different data sets, each consisting of a training set and test set. IPO resulted in an increase of reliable groups (146% - 361%), a decrease of non-reliable groups (3% - 8%) and a decrease of the retention time deviation to one third. IPO was successfully applied to data derived from liquid chromatography coupled to high resolution mass spectrometry from three studies with different sample types and different chromatographic methods and devices. We were also able to show the potential of IPO to increase the reliability of metabolomics data. The source code is implemented in R, tested on Linux and Windows and it is freely available for download at https://github.com/glibiseller/IPO . The training sets and test sets can be downloaded from https://health.joanneum.at/IPO .

Average correlation clustering algorithm (ACCA) for grouping of co-regulated genes with similar pattern of variation in their expression values.

PubMed

Bhattacharya, Anindya; De, Rajat K

2010-08-01

Distance based clustering algorithms can group genes that show similar expression values under multiple experimental conditions. They are unable to identify a group of genes that have similar pattern of variation in their expression values. Previously we developed an algorithm called divisive correlation clustering algorithm (DCCA) to tackle this situation, which is based on the concept of correlation clustering. But this algorithm may also fail for certain cases. In order to overcome these situations, we propose a new clustering algorithm, called average correlation clustering algorithm (ACCA), which is able to produce better clustering solution than that produced by some others. ACCA is able to find groups of genes having more common transcription factors and similar pattern of variation in their expression values. Moreover, ACCA is more efficient than DCCA with respect to the time of execution. Like DCCA, we use the concept of correlation clustering concept introduced by Bansal et al. ACCA uses the correlation matrix in such a way that all genes in a cluster have the highest average correlation values with the genes in that cluster. We have applied ACCA and some well-known conventional methods including DCCA to two artificial and nine gene expression datasets, and compared the performance of the algorithms. The clustering results of ACCA are found to be more significantly relevant to the biological annotations than those of the other methods. Analysis of the results show the superiority of ACCA over some others in determining a group of genes having more common transcription factors and with similar pattern of variation in their expression profiles. Availability of the software: The software has been developed using C and Visual Basic languages, and can be executed on the Microsoft Windows platforms. The software may be downloaded as a zip file from http://www.isical.ac.in/~rajat. Then it needs to be installed. Two word files (included in the zip file) need to be consulted before installation and execution of the software. Copyright 2010 Elsevier Inc. All rights reserved.

B cell cross-epitope of Propionibacterium acnes and Actinobacillus pleuropneumonia selected by phage display library can efficiently protect from Actinobacillus pleuropneumonia infection.

PubMed

Liu, Jianfang; Ma, Qiuyue; Yang, Feng; Zhu, Rining; Gu, Jingmin; Sun, Changjiang; Feng, Xin; Du, Chongtao; Langford, Paul R; Han, Wenyu; Yang, Junling; Lei, Liancheng

2017-06-01

Contagious porcine pleuropneumonia (CPP), caused by Actinobacillus pleuropneumoniae (APP), is a highly transmissible and fatal respiratory illness that causes tremendous economic losses for the pig breeding industry worldwide. Propionibacterium acnes (PA) has a strong cross-reaction with anti-APP1 and anti-APP5 serum and can efficiently prevent APP infection, which was fortuitously found in researching the differential gene between the different APP serotypes. There seems to be some natural cross-protection between PA and APP. To identify the common epitope, the phage display library of a PA whole genome was constructed, whose size is 10 5 . The DNA sequence of the positive clone was determined after three rounds of biopanning, and ten common protein types were identified and the epitope was predicted by computer software. Six peptide epitopes were selected and synthesized for further analysis. Among these epitopes, Ba1, Bb5 and C1 could bind to anti-PA serum and anti-APP1 serum and vice versa. Furthermore, the IgG and IL-4 levels and CD4 + /CD8 + T cell ratios in the Ba1, Bb5 and C1 groups were significantly higher than that in the control group, indicating that the epitopes could trigger an immune response, which was mainly humoral immunity. Moreover, Ba1 and Bb5 equally protected 80% of mice from a fatal dose of APP1 infection compared with the control group. Mice could resist APP1 and APP5 challenge after being treated with the combination of Ba1 and Bb5, with survival rates of 80% and 90%, respectively. These findings suggest that the PA epitope confers antigenicity and can heterologously resist to the APP infection. This finding provides a novel strategy for preventing APP infection. Copyright © 2017 Elsevier B.V. All rights reserved.

Synthesis and characterization of Y2O3 nano-material: An experimental and theoretical study

NASA Astrophysics Data System (ADS)

Ahmad, Sheeraz; Faizan, Mohd; Ahmad, Shabbir; Ikram, Mohd

2018-04-01

We made an attempt to synthesize pure Y2O3 nanomaterial by using the sol-gel method followed by annealing at 600°C and 900°C. The synthesized Y2O3 nanoparticle was characterized by using XRD, FTIR, and UV-Vis spectroscopy. The structural refinement was performed using FULLPROF software by the Rietveld method. The refinement parameters such as lattice constant, atomic position, occupancy, R-factor and goodness of fit (χ2) were calculated. The nanoparticle has a single phase cubic structure with Ia -3 space group. The main absorption band in FTIR spectra centered at 560 cm-1 is attributed to Y-O vibration while the broadband at 3450 cm-1 arises due to O-H vibration. The band gap was obtained from the reflectance spectra using the K-M function F(R∞). The optimized structural parameters and UV-Vis spectrum were calculated using DFT and TD-DFT/B3LYP methods in bulk phase of Y2O3 and compared with experimental UV-Vis spectra in nanophase.

26 CFR 1.1362-0 - Table of contents.

Code of Federal Regulations, 2010 CFR

2010-04-01

... software royalties. (B) Rents. (1) In general. (2) Rents derived in the active trade or business of renting... purchase. (3) 50 percent change in ownership during S termination year. (c) Special rules. (1) S...'s request for determination of an inadvertent termination. (d) Adjustments. (e) Corporation and...

26 CFR 1.1362-0 - Table of contents.

Code of Federal Regulations, 2011 CFR

2011-04-01

... computer software royalties. (B) Rents. (1) In general. (2) Rents derived in the active trade or business... purchase. (3) 50 percent change in ownership during S termination year. (c) Special rules. (1) S...'s request for determination of an inadvertent termination. (d) Adjustments. (e) Corporation and...

Urban Propagation Modeling for Wireless Systems

DTIC Science & Technology

2004-01-30

STIR) GRANT DAAD19-03-1-0069 William Mark Smith Donald C. Cox January 2004 Contents Abstract 1 List of Publications 3 List of Personnel 4 Report of...29 ii 3 Experiment Configuration 31 3.1 Experiment Objectives...156 A.2.2 Software Tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 159 A. 3 Transmitter

Synthesis of [1-.sup.13C]pyruvic acid], [2-.sup.13C]pyruvic acid], [3-.sup.13C]pyruvic acid] and combinations thereof

DOEpatents

Martinez, Rodolfo A [Santa Fe, NM; Unkefer, Clifford J [Los Alamos, NM; Alvarez, Marc A [Santa Fe, NM

2009-09-01

The present invention is directed to labeled compounds, of the formulae ##STR00001## wherein C* is each independently selected from the group consisting of .sup.13C and .sup.12C with the proviso that at least one C* is .sup.13C, each hydrogen of the methylene group can independently be either hydrogen or deuterium, the methyl group includes either zero or three deuterium atoms, Q is from the group of sulfide, sulfinyl, and sulfone, Z is an aryl group from the group of 1-naphthyl, substituted 1-naphthyl, 2-naphthyl, substituted 2-naphthyl, and phenyl groups with the structure ##STR00002## wherein R.sub.1, R.sub.2, R.sub.3, R.sub.4 and R.sub.5 are each independently from the group of hydrogen, a C.sub.1-C.sub.4 lower alkyl, a halogen, and an amino group from the group of NH.sub.2, NHR and NRR' where R and R' are each independently from the group of a C.sub.1-C.sub.4 lower alkyl, a phenyl, and an alkoxy group, and the methyl group can include either zero or three deuterium atoms.

PONDEROSA-C/S: client-server based software package for automated protein 3D structure determination.

PubMed

Lee, Woonghee; Stark, Jaime L; Markley, John L

2014-11-01

Peak-picking Of Noe Data Enabled by Restriction Of Shift Assignments-Client Server (PONDEROSA-C/S) builds on the original PONDEROSA software (Lee et al. in Bioinformatics 27:1727-1728. doi: 10.1093/bioinformatics/btr200, 2011) and includes improved features for structure calculation and refinement. PONDEROSA-C/S consists of three programs: Ponderosa Server, Ponderosa Client, and Ponderosa Analyzer. PONDEROSA-C/S takes as input the protein sequence, a list of assigned chemical shifts, and nuclear Overhauser data sets ((13)C- and/or (15)N-NOESY). The output is a set of assigned NOEs and 3D structural models for the protein. Ponderosa Analyzer supports the visualization, validation, and refinement of the results from Ponderosa Server. These tools enable semi-automated NMR-based structure determination of proteins in a rapid and robust fashion. We present examples showing the use of PONDEROSA-C/S in solving structures of four proteins: two that enable comparison with the original PONDEROSA package, and two from the Critical Assessment of automated Structure Determination by NMR (Rosato et al. in Nat Methods 6:625-626. doi: 10.1038/nmeth0909-625 , 2009) competition. The software package can be downloaded freely in binary format from http://pine.nmrfam.wisc.edu/download_packages.html. Registered users of the National Magnetic Resonance Facility at Madison can submit jobs to the PONDEROSA-C/S server at http://ponderosa.nmrfam.wisc.edu, where instructions, tutorials, and instructions can be found. Structures are normally returned within 1-2 days.

C3I Rapid Prototype Investigation.

DTIC Science & Technology

1986-01-01

feasibility of applying rapid K prototyping techniques to Air Force C3 1 system developments . This report presents the technical progress during the...computer tunctions. The cost to use each in terms of hardware, software, analysis, and needed further developments was assessed. Prototyping approaches were...acquirer, and developer are the ". basis for problems in C3I system developments . These problems destabilize r-. the requirements determination process

Synthesis of [.sup.13C] and [.sup.2H] substituted methacrylic acid, [.sup.13C] and [.sup.2H] substituted methyl methacrylate and/or related compounds

DOEpatents

Alvarez, Marc A.; Martinez, Rodolfo A.; Unkefer, Clifford J.

2010-02-16

The present invention is directed to labeled compounds of the formulae ##STR00001## wherein Q is selected from the group consisting of --S(.dbd.O)--, and --S(.dbd.O).sub.2--, Z is selected from the group consisting of 1-naphthyl, substituted 1-naphthyl, 2-naphthyl, substituted 2-naphthyl, and phenyl groups with the structure ##STR00002## wherein R.sub.1, R.sub.2, R.sub.3, R.sub.4 and R.sub.5 are each independently selected from the group consisting of hydrogen, a C.sub.1-C.sub.4 lower alkyl, a halogen, and an amino group selected from the group consisting of NH.sub.2, NHR and NRR' where R and R' are each independently selected from the group consisting of a C.sub.1-C.sub.4 lower alkyl, an aryl, and an alkoxy group, and X is selected from the group consisting of hydrogen, a C.sub.1-C.sub.4 lower alkyl group, and a fully-deuterated C.sub.1-C.sub.4 lower alkyl group.

Reassessment of the Unique Mode of Binding between Angiotensin II Type 1 Receptor and Their Blockers

PubMed Central

Matsuo, Yoshino; Saku, Keijiro; Karnik, Sadashiva S.

2013-01-01

While the molecular structures of angiotensin II (Ang II) type 1 (AT1) receptor blockers (ARBs) are very similar, they are also slightly different. Although each ARB has been shown to exhibit a unique mode of binding to AT1 receptor, different positions of the AT1 receptor have been analyzed and computational modeling has been performed using different crystal structures for the receptor as a template and different kinds of software. Therefore, we systematically analyzed the critical positions of the AT1 receptor, Tyr113, Tyr184, Lys199, His256 and Gln257 using a mutagenesis study, and subsequently performed computational modeling of the binding of ARBs to AT1 receptor using CXCR4 receptor as a new template and a single version of software. The interactions between Tyr113 in the AT1 receptor and the hydroxyl group of olmesartan, between Lys199 and carboxyl or tetrazole groups, and between His256 or Gln257 and the tetrazole group were studied. The common structure, a tetrazole group, of most ARBs similarly bind to Lys199, His256 and Gln257 of AT1 receptor. Lys199 in the AT1 receptor binds to the carboxyl group of EXP3174, candesartan and azilsartan, whereas oxygen in the amidecarbonyl group of valsartan may bind to Lys199. The benzimidazole portion of telmisartan may bind to a lipophilic pocket that includes Tyr113. On the other hand, the n-butyl group of irbesartan may bind to Tyr113. In conclusion, we confirmed that the slightly different structures of ARBs may be critical for binding to AT1 receptor and for the formation of unique modes of binding. PMID:24260317

Tailoring Nutritional Advice for Mexicans Based on Prevalence Profiles of Diet-Related Adaptive Gene Polymorphisms

PubMed Central

Ojeda-Granados, Claudia; Panduro, Arturo; Gonzalez-Aldaco, Karina; Sepulveda-Villegas, Maricruz; Rivera-Iñiguez, Ingrid

2017-01-01

Diet-related adaptive gene (DRAG) polymorphisms identified in specific populations are associated with chronic disorders in carriers of the adaptive alleles due to changes in dietary and lifestyle patterns in recent times. Mexico’s population is comprised of Amerindians (AM) and Mestizos who have variable AM, European (EUR) and African genetic ancestry and an increased risk of nutrition-related chronic diseases. Nutritional advice based on the Mexican genome and the traditional food culture is needed to develop preventive and therapeutic strategies. Therefore, we aimed to provide a prevalence profile of several DRAG polymorphisms in the Mexican population, including Central West (CW) Mexico subpopulations. Geographic heat maps were built using ArcGIS10 (Esri, Redlands, CA, USA) software, based on the published data of the MTHFR C677T (rs1801133), ABCA1 Arg230Cys (rs9282541), APOE T388C (rs429358)/C526T (rs7412), LCT C-13910T (rs4988235) polymorphisms and AMY1 copy number variation (CNV). Also, new data obtained by allelic discrimination-real-time polymerase chain reaction (RT-PCR) assays for the MTHFR, ABCA1, and APOE polymorphisms as well as the AMY1 CNV in the CW Mexico subpopulations with different proportions of AM and EUR ancestry were included. In the CW region, the highest frequency of the MTHFR 677T, ABCA1 230C and APOE ε4 adaptive alleles was observed in the AM groups, followed by Mestizos with intermediate AM ancestry. The LCT-13910T allele frequency was highest in Mestizos-EUR but extremely low in AM, while the AMY1 diploid copy number was 6.82 ± 3.3 copies. Overall, the heat maps showed a heterogeneous distribution of the DRAG polymorphisms, in which the AM groups revealed the highest frequencies of the adaptive alleles followed by Mestizos. Given these genetic differences, genome-based nutritional advice should be tailored in a regionalized and individualized manner according to the available foods and Mexican traditional food culture that may lead to a healthier dietary pattern. PMID:29125573

Aloe vera Aqueous Extract Effect on Morphine Withdrawal Syndrome in Morphine-Dependent Female Rats.

PubMed

Shahraki, Mohammad Reza; Mirshekari, Hamideh; Sabri, Azame

2014-09-01

Aloe vera is a medicinal herb used as an anti-inflammatory and sedative agent. The current study aimed to evaluate the effect of Aloe vera aqueous extract on morphine withdrawal symptoms in morphine-dependent female rats. The current research was performed on 40 female Wista-Albino rats which were made dependent on morphine using Houshyar protocol and were randomly divided into five groups (A, B, C, D, and E). Group A did not receive any agent in the period of handling but other groups (B, C, D and E) received 5, 10, 20 and 40 mg/kg of Aloe vera aqueous extract by gavage, three times daily for a week, respectively. Withdrawal symptoms, stool form, agitation, disparity, floppy eyelids, and body mass variations were checked for 10 days. The obtained data were analyzed using SPSS v.11 software, and Friedman, Kruskal-Wallis, and Mann-Whitney statistical tests. Statistical difference was considered significant (P < 0.05). The results of the present study showed that agitation, disparity, and floppy eyelids in group E were significantly higher than those of others groups; however, these symptoms in group C were significantly lower than those of the other groups. The results of the present study revealed that the Aloe vera aqueous extract had various effects on morphine withdrawal syndrome in morphine-dependent female rats .

Aloe vera Aqueous Extract Effect on Morphine Withdrawal Syndrome in Morphine-Dependent Female Rats

PubMed Central

Shahraki, Mohammad Reza; Mirshekari, Hamideh; Sabri, Azame

2014-01-01

Background: Aloe vera is a medicinal herb used as an anti-inflammatory and sedative agent. Objectives: The current study aimed to evaluate the effect of Aloe vera aqueous extract on morphine withdrawal symptoms in morphine-dependent female rats. Patients and Methods: The current research was performed on 40 female Wista-Albino rats which were made dependent on morphine using Houshyar protocol and were randomly divided into five groups (A, B, C, D, and E). Group A did not receive any agent in the period of handling but other groups (B, C, D and E) received 5, 10, 20 and 40 mg/kg of Aloe vera aqueous extract by gavage, three times daily for a week, respectively. Withdrawal symptoms, stool form, agitation, disparity, floppy eyelids, and body mass variations were checked for 10 days. The obtained data were analyzed using SPSS v.11 software, and Friedman, Kruskal-Wallis, and Mann-Whitney statistical tests. Statistical difference was considered significant (P < 0.05). Results: The results of the present study showed that agitation, disparity, and floppy eyelids in group E were significantly higher than those of others groups; however, these symptoms in group C were significantly lower than those of the other groups. Conclusions: The results of the present study revealed that the Aloe vera aqueous extract had various effects on morphine withdrawal syndrome in morphine-dependent female rats . PMID:25593890

Pharmacokinetics interaction between imatinib and genistein in rats.

PubMed

Wang, Zhe; Wang, Li; Xia, Meng-Ming; Sun, Wei; Huang, Cheng-Ke; Cui, Xiao; Hu, Guo-Xin; Lian, Qing-Quan; Wang, Zeng-Shou

2015-01-01

The objective of this work was to investigate the effect of orally administered genistein on the pharmacokinetics of imatinib and N-desmethyl imatinib in rats. Twenty-five healthy male SD (Sprague-Dawley) rats were randomly divided into five groups: A group (control group), B group (multiple dose of 100 mg/kg genistein for consecutive 15 days), C group (multiple dose of 50 mg/kg genistein for consecutive 15 days), D group (a single dose of 100 mg/kg genistein), and E group (a single dose of 50 mg/kg genistein). A single dose of imatinib is administered orally 30 min after administration of genistein (100 mg/kg or 50 mg/kg). The pharmacokinetic parameters of imatinib and N-desmethyl imatinib were calculated by DAS 3.0 software. The multiple dose of 100 mg/kg or 50 mg/kg genistein significantly (P < 0.05) decreased the AUC0-t and C max of imatinib. AUC0-t and the C max of N-desmethyl imatinib were also increased, but without any significant difference. However, the single dose of 100 mg/kg or 50 mg/kg genistein has no effect on the pharmacokinetics of imatinib and N-desmethyl imatinib. Those results indicated that multiple dose of genistein (100 mg/kg or 50 mg/kg) induces the metabolism of imatinib, while single dose of genistein has no effect.

WinDAM C earthen embankment internal erosion analysis software

USDA-ARS?s Scientific Manuscript database

Two primary causes of dam failure are overtopping and internal erosion. For the purpose of evaluating dam safety for existing earthen embankment dams and proposed earthen embankment dams, Windows Dam Analysis Modules C (WinDAM C) software will simulate either internal erosion or erosion resulting f...

ISWHM: Tools and Techniques for Software and System Health Management

NASA Technical Reports Server (NTRS)

Schumann, Johann; Mengshoel, Ole J.; Darwiche, Adnan

2010-01-01

This presentation presents status and results of research on Software Health Management done within the NRA "ISWHM: Tools and Techniques for Software and System Health Management." Topics include: Ingredients of a Guidance, Navigation, and Control System (GN and C); Selected GN and C Testbed example; Health Management of major ingredients; ISWHM testbed architecture; and Conclusions and next Steps.

Motion Simulation Research Related Short Term Training Attachment to TARDEC

DTIC Science & Technology

2013-04-01

CASSI group has five main areas of focus, which are, ground vehicle power and mobility , vehicle electronics and architecture, intelligent ground...control, steering as well as seats can all be changed to mock the necessary vehicle. Originally it was designed for a High Mobility Multipurpose Wheeled...necessary outputs to the motion base. SimCreator is a software package, similar to SimuLink. Most of the backend coding is done in C++. RTI accounts

An Enhanced Collaborative-Software Environment for Information Fusion at the Unit of Action

DTIC Science & Technology

2007-12-07

GRAY CONVOY RED CONVOY DISMOUNT SA-18 D O DISMOUNT W/ SURVEILANCE EQUIPDISMOUNT UNKNOWN zC-LFFRLIFEFORM < SA-18 FIXED WING CLASSIFIED INFORMATION...Ground Truth Semantic-aggregation hierarchy (evaluation-use only) BSGs GTGs BSOS GTOS Reports Figure 4: Semantic-Aggregation Hierarchy PIR/SIR CIFAR...Finally, GTOs can be aggregated into GTGs (ground-truth groups) using the provided ground-truth force structure hierarchy for GTOs. GTGs can only be

76 FR 5832 - International Business Machines (IBM), Software Group Business Unit, Optim Data Studio Tools QA...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-02-02

... DEPARTMENT OF LABOR Employment and Training Administration [TA-W-74,554] International Business Machines (IBM), Software Group Business Unit, Optim Data Studio Tools QA, San Jose, CA; Notice of... determination of the TAA petition filed on behalf of workers at International Business Machines (IBM), Software...

DOE Office of Scientific and Technical Information (OSTI.GOV)

Ari-Gur, Pnina; Garlea, Vasile O.; Cao, Huibo

In this study, Heusler alloys of Ni-Mn-Ga compositions demonstrate ferromagnetic shape memory effect in the martensitic state. The transformation temperature and the chemical order depend strongly on the composition. In the current work, the structure and chemical order of the martensitic phase of Ni 1.91Mn 1.29Ga 0.8 were studied using neutron diffraction; the diffraction pattern was refined using the FullProf software. It was determined that the structural transition occurs around 330 K. At room temperature, 300 K, which is below the martensite transformation temperature, all the Bragg reflections can be described by a monoclinic lattice with a symmetry of spacemore » group P 1 2/m 1 and lattice constants of a = 4.23047(7) [Å], b = 5.58333(6) [Å], c = 21.0179(2) [Å], beta = 90.328(1). The chemical order is of critical importance in these alloys, and it was previously studied at 363 K. Analysis of the neutron diffraction in the monoclinic phase shows that the chemical order is maintained during the martensitic transformation.« less

FIMTrack: An open source tracking and locomotion analysis software for small animals.

PubMed

Risse, Benjamin; Berh, Dimitri; Otto, Nils; Klämbt, Christian; Jiang, Xiaoyi

2017-05-01

Imaging and analyzing the locomotion behavior of small animals such as Drosophila larvae or C. elegans worms has become an integral subject of biological research. In the past we have introduced FIM, a novel imaging system feasible to extract high contrast images. This system in combination with the associated tracking software FIMTrack is already used by many groups all over the world. However, so far there has not been an in-depth discussion of the technical aspects. Here we elaborate on the implementation details of FIMTrack and give an in-depth explanation of the used algorithms. Among others, the software offers several tracking strategies to cover a wide range of different model organisms, locomotion types, and camera properties. Furthermore, the software facilitates stimuli-based analysis in combination with built-in manual tracking and correction functionalities. All features are integrated in an easy-to-use graphical user interface. To demonstrate the potential of FIMTrack we provide an evaluation of its accuracy using manually labeled data. The source code is available under the GNU GPLv3 at https://github.com/i-git/FIMTrack and pre-compiled binaries for Windows and Mac are available at http://fim.uni-muenster.de.

Strengthening Software Authentication with the ROSE Software Suite

DOE Office of Scientific and Technical Information (OSTI.GOV)

White, G

2006-06-15

Many recent nonproliferation and arms control software projects include a software authentication regime. These include U.S. Government-sponsored projects both in the United States and in the Russian Federation (RF). This trend toward requiring software authentication is only accelerating. Demonstrating assurance that software performs as expected without hidden ''backdoors'' is crucial to a project's success. In this context, ''authentication'' is defined as determining that a software package performs only its intended purpose and performs said purpose correctly and reliably over the planned duration of an agreement. In addition to visual inspections by knowledgeable computer scientists, automated tools are needed to highlightmore » suspicious code constructs, both to aid visual inspection and to guide program development. While many commercial tools are available for portions of the authentication task, they are proprietary and not extensible. An open-source, extensible tool can be customized to the unique needs of each project (projects can have both common and custom rules to detect flaws and security holes). Any such extensible tool has to be based on a complete language compiler. ROSE is precisely such a compiler infrastructure developed within the Department of Energy (DOE) and targeted at the optimization of scientific applications and user-defined libraries within large-scale applications (typically applications of a million lines of code). ROSE is a robust, source-to-source analysis and optimization infrastructure currently addressing large, million-line DOE applications in C and C++ (handling the full C, C99, C++ languages and with current collaborations to support Fortran90). We propose to extend ROSE to address a number of security-specific requirements, and apply it to software authentication for nonproliferation and arms control projects.« less

Implementing Kanban for agile process management within the ALMA Software Operations Group

NASA Astrophysics Data System (ADS)

Reveco, Johnny; Mora, Matias; Shen, Tzu-Chiang; Soto, Ruben; Sepulveda, Jorge; Ibsen, Jorge

2014-07-01

After the inauguration of the Atacama Large Millimeter/submillimeter Array (ALMA), the Software Operations Group in Chile has refocused its objectives to: (1) providing software support to tasks related to System Integration, Scientific Commissioning and Verification, as well as Early Science observations; (2) testing the remaining software features, still under development by the Integrated Computing Team across the world; and (3) designing and developing processes to optimize and increase the level of automation of operational tasks. Due to their different stakeholders, each of these tasks presents a wide diversity of importances, lifespans and complexities. Aiming to provide the proper priority and traceability for every task without stressing our engineers, we introduced the Kanban methodology in our processes in order to balance the demand on the team against the throughput of the delivered work. The aim of this paper is to share experiences gained during the implementation of Kanban in our processes, describing the difficulties we have found, solutions and adaptations that led us to our current but still evolving implementation, which has greatly improved our throughput, prioritization and problem traceability.

Software requirements specification for the GIS-T/ISTEA pooled fund study phase C linear referencing engine

DOE Office of Scientific and Technical Information (OSTI.GOV)

Amai, W.; Espinoza, J. Jr.; Fletcher, D.R.

1997-06-01

This Software Requirements Specification (SRS) describes the features to be provided by the software for the GIS-T/ISTEA Pooled Fund Study Phase C Linear Referencing Engine project. This document conforms to the recommendations of IEEE Standard 830-1984, IEEE Guide to Software Requirements Specification (Institute of Electrical and Electronics Engineers, Inc., 1984). The software specified in this SRS is a proof-of-concept implementation of the Linear Referencing Engine as described in the GIS-T/ISTEA pooled Fund Study Phase B Summary, specifically Sheet 13 of the Phase B object model. The software allows an operator to convert between two linear referencing methods and a datummore » network.« less

Effects of angiotensin-II receptor blocker candesartan cilexetil in rats with dilated cardiomyopathy.

PubMed

Shirai, Ken; Watanabe, Kenichi; Ma, Meilei; Wahed, Mir I I; Inoue, Mikio; Saito, Yuki; Suresh, Palaniyandi Selvaraj; Kashimura, Takeshi; Tachikawa, Hitoshi; Kodama, Makoto; Aizawa, Yoshifusa

2005-01-01

We examined effects of an angiotensin-II receptor blockers, candesartan cilexetil, in rats with dilated cardiomyopathy after autoimmune myocarditis. Candesartan cilexetil showed angiotensin-II blocking action in a dose-dependent manner in rats with dilated cardiomyopathy. Twenty-eight days after immunization, surviving Lewis rats were divided into four groups and given candesartan cilexetil at 0.05 mg/kg, 0.5 mg/kg or 5 mg/kg per day (Group-C0.05, n = 15, Group-C0.5, n = 15 and Group-C5, n = 15, respectively) or vehicle alone (Group-V, n = 15). After oral administration for 1 month, the left ventricular end-diastolic pressure and heart weight/body weight ratio were lower in Group-C0.05 (13.3+/-1.1 mmHg and 3.7+/-0.2 g/kg, respectively), in Group-C0.5 (8.0+/-0.9 mmHg and 3.3+/-0.1 g/kg, respectively) and in Group-C5 (5.5+/-1 mmHg and 3.1+/-0.1 g/kg, respectively) than in Group-V (13.5+/-1.0 mmHg and 3.8+/-0.2 g/kg, respectively). The area of myocardial fibrosis was also lower in Group-C0.05 (25+/-3%), in Group-C0.5 (20+/-3%), and in Group-C5 (12+/-1%) than in Group-V (32+/-4%). Furthermore, expressions of transforming growth factor-beta1 and collagen-III mRNA were suppressed in Group-C0.05 (349+/-23% and 395+/-22%, respectively), Group-C0.5 (292+/-81% and 364+/-42%, respectively) and in Group-C5 (204+/-63% and 259+/-33%, respectively) compared with those in Group-V (367+/-26% and 437+/-18%, respectively). These results suggest that candesartan cilexetil can improve the function of inefficient heart.

Prediction of functional profiles of gut microbiota from 16S rRNA metagenomic data provides a more robust evaluation of gut dysbiosis occurring in Japanese type 2 diabetic patients.

PubMed

Inoue, Ryo; Ohue-Kitano, Ryuji; Tsukahara, Takamitsu; Tanaka, Masashi; Masuda, Shinya; Inoue, Takayuki; Yamakage, Hajime; Kusakabe, Toru; Hasegawa, Koji; Shimatsu, Akira; Satoh-Asahara, Noriko

2017-11-01

We assessed whether gut microbial functional profiles predicted from 16S rRNA metagenomics differed in Japanese type 2 diabetic patients. A total of 22 Japanese subjects were recruited from our outpatient clinic in an observational study. Fecal samples were obtained from 12 control and 10 type 2 diabetic subjects. 16S rRNA metagenomic data were generated and functional profiles predicted using "Phylogenetic Investigation of Communities by Reconstruction of Unobserved States" software. We measured the parameters of glucose metabolism, gut bacterial taxonomy and functional profile, and examined the associations in a cross-sectional manner. Eleven of 288 "Kyoto Encyclopedia of Genes and Genomes" pathways were significantly enriched in diabetic patients compared with control subjects ( p <0.05, q<0.1). The relative abundance of almost all pathways, including the Insulin signaling pathway and Glycolysis/Gluconeogenesis , showed strong, positive correlations with hemoglobin A 1c (HbA 1c ) and fasting plasma glucose (FPG) levels. Bacterial taxonomic analysis showed that genus Blautia significantly differed between groups and had negative correlations with HbA 1c and FPG levels. Our findings suggest a novel pathophysiological relationship between gut microbial communities and diabetes, further highlighting the significance and utility of combining prediction of functional profiles with ordinal bacterial taxonomic analysis (UMIN Clinical Trails Registry number: UMIN000026592).

Titanium doped LSCM anode for hydrocarbon fuelled SOFCs

DOE Office of Scientific and Technical Information (OSTI.GOV)

Azad, Abul K.; Hakem, Afizul; Petra, Pg. M. Iskandar

2015-05-15

La{sub 0.75}Sr{sub 0.25}Cr{sub 0.5-x}Mn{sub 0.5}Ti{sub x}O{sub 3} (x = 0.1, 0.2) has been synthesized in solid state reaction method and tested as a potential anode material for solid oxide fuel cells. Rietveld refinement of X-ray powder diffraction data using Fullprof software shows that the materials crystallize in the rhombohedral symmetry in the R-3C space group. The cell parameters are: a = b = 5.5286 (4) Å, c = 13.408(1) Å, α = β = 90°, γ = 120°. Particle size distribution measurements show that the average particle size for x = 0.1 and 0.2 was 232.66 nm and 176.63 nm, respectively. Themore » potential on particles were found to be −22.86 mV and −27.73 mV, for x = 0.1 and x = 0.2, respectively. Thermal expansion measurement using thermo-mechanical analyzer shows that the thermal expansion coefficient is 13.96 × 10{sup −6}/°C which is close to the thermal expansion of the state-of–the art YSZ electrolyte. Microstructure has been observed from scanning electron microscopy which shows a porous structure. Energy dispersive X-ray shows that the percentage of the different cations and anions in the structure are close to the chemical occupancies.« less

Statistical assessment of crosstalk enrichment between gene groups in biological networks.

PubMed

McCormack, Theodore; Frings, Oliver; Alexeyenko, Andrey; Sonnhammer, Erik L L

2013-01-01

Analyzing groups of functionally coupled genes or proteins in the context of global interaction networks has become an important aspect of bioinformatic investigations. Assessing the statistical significance of crosstalk enrichment between or within groups of genes can be a valuable tool for functional annotation of experimental gene sets. Here we present CrossTalkZ, a statistical method and software to assess the significance of crosstalk enrichment between pairs of gene or protein groups in large biological networks. We demonstrate that the standard z-score is generally an appropriate and unbiased statistic. We further evaluate the ability of four different methods to reliably recover crosstalk within known biological pathways. We conclude that the methods preserving the second-order topological network properties perform best. Finally, we show how CrossTalkZ can be used to annotate experimental gene sets using known pathway annotations and that its performance at this task is superior to gene enrichment analysis (GEA). CrossTalkZ (available at http://sonnhammer.sbc.su.se/download/software/CrossTalkZ/) is implemented in C++, easy to use, fast, accepts various input file formats, and produces a number of statistics. These include z-score, p-value, false discovery rate, and a test of normality for the null distributions.

The Preliminary Results of GMSTech: A Software Development for Microseismic Characterization

NASA Astrophysics Data System (ADS)

Rohaman, Maman; Suhendi, Cahli; Verdhora Ry, Rexha; Sugiartono Prabowo, Billy; Widiyantoro, Sri; Nugraha, Andri Dian; Yudistira, Tedi; Mujihardi, Bambang

2017-04-01

The processing of microseismic data requires reliable software for imaging the condition of subsurface related to occurring microseismicity. In general, the currently available software is only specific for certain processing module and developed by the different developer. However, the software with integrated processing modules will give a better value because the users can use it easier and faster. We developed GMSTech (Ganesha Microseismic Technology), a C# language-based standing-alone software consisting several modules for processing of microseismic data. Its function is to solve a non-linear inverse problem and imaging the subsurface. C# library is supported by ILNumerics to reduce time consumption and give good visualization. In this preliminary result, we will present four developed modules: (1) hypocenter determination, (2) moment magnitude calculation, and (3) 3D seismic tomography. In the first module, we provide four methods for locating the microseismic events that can be chosen by a user independently: simulated annealing method, guided grid-search method, Geiger’s method, and joint hypocenter determination (JHD). The second module can be used for calculating moment magnitude using Brune method and to estimate the released energy of the event. At last, we also provided the module of 3-D seismic tomography for imaging the velocity structures based on delay time tomography. We demonstrated the software using both a synthetic data and a real data from a certain geothermal field in Indonesia. The results for all modules are reliable and remarkable, reviewed statistically by RMS error. We will keep examining the software using another set of data and developing further modules of processing.

Implementation of density functional theory method on object-oriented programming (C++) to calculate energy band structure using the projector augmented wave (PAW)

NASA Astrophysics Data System (ADS)

Alfianto, E.; Rusydi, F.; Aisyah, N. D.; Fadilla, R. N.; Dipojono, H. K.; Martoprawiro, M. A.

2017-05-01

This study implemented DFT method into the C++ programming language with object-oriented programming rules (expressive software). The use of expressive software results in getting a simple programming structure, which is similar to mathematical formula. This will facilitate the scientific community to develop the software. We validate our software by calculating the energy band structure of Silica, Carbon, and Germanium with FCC structure using the Projector Augmented Wave (PAW) method then compare the results to Quantum Espresso calculation’s results. This study shows that the accuracy of the software is 85% compared to Quantum Espresso.

The software system development for the TAMU real-time fan beam scatterometer data processors

NASA Technical Reports Server (NTRS)

Clark, B. V.; Jean, B. R.

1980-01-01

A software package was designed and written to process in real-time any one quadrature channel pair of radar scatterometer signals form the NASA L- or C-Band radar scatterometer systems. The software was successfully tested in the C-Band processor breadboard hardware using recorded radar and NERDAS (NASA Earth Resources Data Annotation System) signals as the input data sources. The processor development program and the overall processor theory of operation and design are described. The real-time processor software system is documented and the results of the laboratory software tests, and recommendations for the efficient application of the data processing capabilities are presented.

Shaping ability of reciprocating motion of WaveOne and HyFlex in moderate to severe curved canals: A comparative study with cone beam computed tomography

PubMed Central

Simpsy, Gurram Samuel; Sajjan, Girija S.; Mudunuri, Padmaja; Chittem, Jyothi; Prasanthi, Nalam N. V. D.; Balaga, Pankaj

2016-01-01

Introduction: M-Wire and reciprocating motion of WaveOne and controlled memory (CM) wire) of HyFlex were the recent innovations using thermal treatment. Therefore, a study was planned to evaluate the shaping ability of reciprocating motion of WaveOne and HyFlex using cone beam computed tomography (CBCT). Methodology: Forty-five freshly extracted mandibular teeth were selected and stored in saline until use. All teeth were scanned pre- and post-operatively using CBCT (Kodak 9000). All teeth were accessed and divided into three groups. (1) Group 1 (control n = 15): Instrumented with ProTaper. (2) Group 2 (n = 15): Instrumented with primary file (8%/25) WaveOne. (3) Group 3 (n = 15): Instrumented with (4%/25) HyFlex CM. Sections at 1, 3, and 5 mm were obtained from the pre- and post-operative scans. Measurement was done using CS3D software and Adobe Photoshop software. Apical transportation and degree of straightening were measured and statistically analyzed. Results: HyFlex showed lesser apical transportation when compared to other groups at 1 and 3 mm. WaveOne showed lesser degree of straightening when compared to other groups. Conclusion: This present study concluded that all systems could be employed in routine endodontics whereas HyFlex and WaveOne could be employed in severely curved canals. PMID:27994323

Effects of Common Polymorphisms in the MTHFR and ACE Genes on Diabetic Peripheral Neuropathy Progression: a Meta-Analysis.

PubMed

Wu, Shuai; Han, Yan; Hu, Qiang; Zhang, Xiaojie; Cui, Guangcheng; Li, Zezhi; Guan, Yangtai

2017-05-01

Diabetic peripheral neuropathy (DPN) is a microvascular complication of diabetes mellitus. The aim of this meta-analysis was to evaluate the effects of methylenetetrahydrofolate reductase (MTHFR) 677 C>T and ACE I/D polymorphisms in the development of DPN. We systematically reviewed published studies on MTHFR 677 C>T and ACE I/D polymorphisms and DPN found in various types of electronic databases. Strengthening the Reporting of Observational studies in Epidemiology (STROBE) quality score systems were used to determine the quality of the articles selected for inclusion. Odds ratios (ORs) and its corresponding 95 % confidence interval (95 % CI) were calculated. We used STATA statistical software (version 12.0, Stata Corporation, College Station, TX, USA) to deal with statistical data. Our results indicated an association of ACE D>I mutation (OR = 1.43, 95 % CI 1.12-1.83, P = 0.004) and MTHFR 677 C>T mutation (OR = 1.43, 95 % CI 1.08-1.90, P = 0.014) with DPN under the allele model, and similar results were also found under the dominant model (all P < 0.05). Subgroup analysis by country indicated that the MTHFR 677 C>T polymorphism may be the main risk factor for DPN in Turkey under four genetic models. ACE D>I mutation was correlated with DPN in Japanese and Pakistani populations in the majority of groups. The relationships of MTHFR 677 C>T and ACE I/D polymorphisms with DPN patients presented in this meta-analyses support the view that the MTHFR and ACE genes might play an important role in the development of DPN.

An examination of student attitudes and understanding of exponential functions using interactive instructional multimedia

NASA Astrophysics Data System (ADS)

Singleton, Cynthia M.

The purpose of this study was to examine students' attitudes and understanding of exponential functions using InterAct Math, a mathematics tutorial software. The researcher used a convenience sampling of a total of 78 students from two intact pre-calculus classes; the students in the experimental group totaled 41 and the control group totaled 37. The two groups were exposed to the same curriculum content taught by the same instructor, the researcher. The experimental group used the mathematics tutorial software as an integral part of the instructional delivery. The control group used traditional instruction without integration of the educational technology. Data were collected during a two week span using a mixed-methodology to address the major research questions: (1) Is there a statistically significant difference in the mean achievement test scores between the experimental and the control groups? (2) Is there a statistically significant difference in students' attitudes toward learning mathematics between the experimental group and the control group? The researcher utilized paired t-tests and independent t-tests as statistical methods to evaluate the effectiveness of the intervention and to establish whether there was a significant difference between the experimental and control groups. Based on the analyses of the quantitative data, it was established that the students who received the InterAct Math tutorial (experimental group) did not perform better than the control group on exponential functions, graphs and applications. However, the quantitative part of the study (Aiken-Dreger Mathematics Attitude Scale) revealed that, while students in the experimental and control groups started with similar attitudes about mathematics and the integration of technology, their attitudes were significantly different at the conclusion of the study. The fear of mathematics was reduced for the experimental group at the end of the study, and their enjoyment of the subject matter was increased as a result of the intervention. No significant difference was reported concerning attitudes toward fear and enjoyment of learning mathematics for the control group. The researcher concluded that the use of InterAct Math tutorial software as part of the instructional delivery was beneficial and contributed to a positive attitude change. Other qualitative data obtained from the unstructured interviews of the treatment group supported these findings and reported that the change in attitudes was attributable to the use of the InterAct software in the instructional delivery of the course. The researcher concluded that the results of the study did not provide evidence that InterAct Math software could be credited with producing better learning outcomes. However, it appears that the InterAct Math tutorial software is an effective tutorial tool in promoting positive change in students' attitudes toward learning mathematics; thus, it is an effective tool for mathematics instruction. Based on the above results, it was concluded that the InterAct Math tutorial is an effective tutorial tool in promoting positive attitude change in students toward learning mathematics.

Using Modern Methodologies with Maintenance Software

NASA Technical Reports Server (NTRS)

Streiffert, Barbara A.; Francis, Laurie K.; Smith, Benjamin D.

2014-01-01

Jet Propulsion Laboratory uses multi-mission software produced by the Mission Planning and Sequencing (MPS) team to process, simulate, translate, and package the commands that are sent to a spacecraft. MPS works under the auspices of the Multi-Mission Ground Systems and Services (MGSS). This software consists of nineteen applications that are in maintenance. The MPS software is classified as either class B (mission critical) or class C (mission important). The scheduling of tasks is difficult because mission needs must be addressed prior to performing any other tasks and those needs often spring up unexpectedly. Keeping track of the tasks that everyone is working on is also difficult because each person is working on a different software component. Recently the group adopted the Scrum methodology for planning and scheduling tasks. Scrum is one of the newer methodologies typically used in agile development. In the Scrum development environment, teams pick their tasks that are to be completed within a sprint based on priority. The team specifies the sprint length usually a month or less. Scrum is typically used for new development of one application. In the Scrum methodology there is a scrum master who is a facilitator who tries to make sure that everything moves smoothly, a product owner who represents the user(s) of the software and the team. MPS is not the traditional environment for the Scrum methodology. MPS has many software applications in maintenance, team members who are working on disparate applications, many users, and is interruptible based on mission needs, issues and requirements. In order to use scrum, the methodology needed adaptation to MPS. Scrum was chosen because it is adaptable. This paper is about the development of the process for using scrum, a new development methodology, with a team that works on disparate interruptible tasks on multiple software applications.

Crew Launch Vehicle (CLV) Avionics and Software Integration Overview

NASA Technical Reports Server (NTRS)

Monell, Donald W.; Flynn, Kevin C.; Maroney, Johnny

2006-01-01

On January 14, 2004, the President of the United States announced a new plan to explore space and extend a human presence across our solar system. The National Aeronautics and Space Administration (NASA) established the Exploration Systems Mission Directorate (ESMD) to develop and field a Constellation Architecture that will bring the Space Exploration vision to fruition. The Constellation Architecture includes a human-rated Crew Launch Vehicle (CLV) segment, managed by the Marshall Space Flight Center (MSFC), comprised of the First Stage (FS), Upper Stage (US), and Upper Stage Engine (USE) elements. The CLV s purpose is to provide safe and reliable crew and cargo transportation into Low Earth Orbit (LEO), as well as insertion into trans-lunar trajectories. The architecture's Spacecraft segment includes, among other elements, the Crew Exploration Vehicle (CEV), managed by the Johnson Space Flight Center (JSC), which is launched atop the CLV. MSFC is also responsible for CLV and CEV stack integration. This paper provides an overview of the Avionics and Software integration approach (which includes the Integrated System Health Management (ISHM) functions), both within the CLV, and across the CEV interface; it addresses the requirements to be met, logistics of meeting those requirements, and the roles of the various groups. The Avionics Integration and Vehicle Systems Test (ANST) Office was established at the MSFC with system engineering responsibilities for defining and developing the integrated CLV Avionics and Software system. The AIVST Office has defined two Groups, the Avionics and Software Integration Group (AVSIG), and the Integrated System Simulation and Test Integration Group (ISSTIG), and four Panels which will direct trade studies and analyses to ensure the CLV avionics and software meet CLV system and CEV interface requirements. The four panels are: 1) Avionics Integration Panel (AIP), 2) Software Integration Panel, 3) EEE Panel, and 4) Systems Simulation and Test Panel. Membership on the groups and panels includes the MSFC representatives from the requisite engineering disciplines, the First Stage, the Upper Stage, the Upper Stage Engine projects, and key personnel from other NASA centers. The four panels will take the results of trade studies and analyses and develop documentation in support of Design Analysis Cycle Reviews and ultimately the System Requirements Review.

Thermal management in closed incubators: New software for assessing the impact of humidity on the optimal incubator air temperature.

PubMed

Delanaud, Stéphane; Decima, Pauline; Pelletier, Amandine; Libert, Jean-Pierre; Durand, Estelle; Stephan-Blanchard, Erwan; Bach, Véronique; Tourneux, Pierre

2017-08-01

Low-birth-weight (LBW) neonates are nursed in closed incubators to prevent transcutaneous water loss. The RH's impact on the optimal incubator air temperature setting has not been studied. On the basis of a clinical cohort study, we modelled all the ambient parameters influencing body heat losses and gains. The algorithm quantifies the change in RH on the air temperature, to maintain optimal thermal conditions in the incubator. Twenty-three neonates (gestational age (GA): 30.0 [28.9-31.6] weeks) were included. A 20% increase and a 20% decrease in the RH induced a change in air temperature of between -1.51 and +1.85°C for a simulated 650g neonate (GA: 26 weeks), between -1.66 and +1.87°C for a 1000g neonate (GA: 31 weeks), and between -1.77 and +1.97°C for a 2000g neonate (GA: 33 weeks) (p<0.001). According to regression analyses, the optimal incubator air temperature=a+b relative humidity +c age +d weight (p<0.001). We have developed new mathematical equations for calculating the optimal temperature for the incubator air as a function of the latter's relative humidity. The software constitutes a decision support tool for improving patient care in routine clinical practice. Copyright © 2017 IPEM. Published by Elsevier Ltd. All rights reserved.

Microorganism penetration in dentinal tubules of instrumented and retreated root canal walls. In vitro SEM study

PubMed Central

Al-Sulaiman, Alaa; Al-Rasheed, Fellwa; Alnajjar, Fatimah; Al-Abdulwahab, Bander; Al-Badah, Abdulhakeem

2014-01-01

Objectives This in vitro study aimed to investigate the ability of Candida albicans (C. albicans) and Enterococcus faecalis (E. faecalis) to penetrate dentinal tubules of instrumented and retreated root canal surface of split human teeth. Materials and Methods Sixty intact extracted human single-rooted teeth were divided into 4 groups, negative control, positive control without canal instrumentation, instrumented, and retreated. Root canals in the instrumented group were enlarged with endodontic instruments, while root canals in the retreated group were enlarged, filled, and then removed the canal filling materials. The teeth were split longitudinally after canal preparation in 3 groups except the negative control group. The teeth were inoculated with both microorganisms separately and in combination. Teeth specimens were examined by scanning electron microscopy (SEM), and the depth of penetration into the dentinal tubules was assessed using the SMILE view software (JEOL Ltd). Results Penetration of C. albicans and E. faecalis into the dentinal tubules was observed in all 3 groups, although penetration was partially restricted by dentin debris of tubules in the instrumented group and remnants of canal filling materials in the retreated group. In all 3 groups, E. faecalis penetrated deeper into the dentinal tubules by way of cell division than C. albicans which built colonies and penetrated by means of hyphae. Conclusions Microorganisms can easily penetrate dentinal tubules of root canals with different appearance based on the microorganism size and status of dentinal tubules. PMID:25383343

Software Defined GPS Receiver for International Space Station

NASA Technical Reports Server (NTRS)

Duncan, Courtney B.; Robison, David E.; Koelewyn, Cynthia Lee

2011-01-01

JPL is providing a software defined radio (SDR) that will fly on the International Space Station (ISS) as part of the CoNNeCT project under NASA's SCaN program. The SDR consists of several modules including a Baseband Processor Module (BPM) and a GPS Module (GPSM). The BPM executes applications (waveforms) consisting of software components for the embedded SPARC processor and logic for two Virtex II Field Programmable Gate Arrays (FPGAs) that operate on data received from the GPSM. GPS waveforms on the SDR are enabled by an L-Band antenna, low noise amplifier (LNA), and the GPSM that performs quadrature downconversion at L1, L2, and L5. The GPS waveform for the JPL SDR will acquire and track L1 C/A, L2C, and L5 GPS signals from a CoNNeCT platform on ISS, providing the best GPS-based positioning of ISS achieved to date, the first use of multiple frequency GPS on ISS, and potentially the first L5 signal tracking from space. The system will also enable various radiometric investigations on ISS such as local multipath or ISS dynamic behavior characterization. In following the software-defined model, this work will create a highly portable GPS software and firmware package that can be adapted to another platform with the necessary processor and FPGA capability. This paper also describes ISS applications for the JPL CoNNeCT SDR GPS waveform, possibilities for future global navigation satellite system (GNSS) tracking development, and the applicability of the waveform components to other space navigation applications.

Software Engineering Guidebook

NASA Technical Reports Server (NTRS)

Connell, John; Wenneson, Greg

1993-01-01

The Software Engineering Guidebook describes SEPG (Software Engineering Process Group) supported processes and techniques for engineering quality software in NASA environments. Three process models are supported: structured, object-oriented, and evolutionary rapid-prototyping. The guidebook covers software life-cycles, engineering, assurance, and configuration management. The guidebook is written for managers and engineers who manage, develop, enhance, and/or maintain software under the Computer Software Services Contract.

E-learning for Critical Thinking: Using Nominal Focus Group Method to Inform Software Content and Design.

PubMed

Parker, Steve; Mayner, Lidia; Michael Gillham, David

2015-12-01

Undergraduate nursing students are often confused by multiple understandings of critical thinking. In response to this situation, the Critiique for critical thinking (CCT) project was implemented to provide consistent structured guidance about critical thinking. This paper introduces Critiique software, describes initial validation of the content of this critical thinking tool and explores wider applications of the Critiique software. Critiique is flexible, authorable software that guides students step-by-step through critical appraisal of research papers. The spelling of Critiique was deliberate, so as to acquire a unique web domain name and associated logo. The CCT project involved implementation of a modified nominal focus group process with academic staff working together to establish common understandings of critical thinking. Previous work established a consensus about critical thinking in nursing and provided a starting point for the focus groups. The study was conducted at an Australian university campus with the focus group guided by open ended questions. Focus group data established categories of content that academic staff identified as important for teaching critical thinking. This emerging focus group data was then used to inform modification of Critiique software so that students had access to consistent and structured guidance in relation to critical thinking and critical appraisal. The project succeeded in using focus group data from academics to inform software development while at the same time retaining the benefits of broader philosophical dimensions of critical thinking.

E-learning for Critical Thinking: Using Nominal Focus Group Method to Inform Software Content and Design

PubMed Central

Parker, Steve; Mayner, Lidia; Michael Gillham, David

2015-01-01

Background: Undergraduate nursing students are often confused by multiple understandings of critical thinking. In response to this situation, the Critiique for critical thinking (CCT) project was implemented to provide consistent structured guidance about critical thinking. Objectives: This paper introduces Critiique software, describes initial validation of the content of this critical thinking tool and explores wider applications of the Critiique software. Materials and Methods: Critiique is flexible, authorable software that guides students step-by-step through critical appraisal of research papers. The spelling of Critiique was deliberate, so as to acquire a unique web domain name and associated logo. The CCT project involved implementation of a modified nominal focus group process with academic staff working together to establish common understandings of critical thinking. Previous work established a consensus about critical thinking in nursing and provided a starting point for the focus groups. The study was conducted at an Australian university campus with the focus group guided by open ended questions. Results: Focus group data established categories of content that academic staff identified as important for teaching critical thinking. This emerging focus group data was then used to inform modification of Critiique software so that students had access to consistent and structured guidance in relation to critical thinking and critical appraisal. Conclusions: The project succeeded in using focus group data from academics to inform software development while at the same time retaining the benefits of broader philosophical dimensions of critical thinking. PMID:26835469

42 CFR 412.602 - Definitions.

Code of Federal Regulations, 2010 CFR

2010-10-01

... data items into the fields of the computerized patient assessment software program. Functional-related... 1, 2005, an area as defined in § 412.62(f)(1)(iii). For discharges occurring on or after October 1, 2005, rural area means an area as defined in § 412.64(b)(1)(ii)(C). Transfer means the release of a...

42 CFR 412.602 - Definitions.

Code of Federal Regulations, 2014 CFR

2014-10-01

... data items into the fields of the computerized patient assessment software program. Functional-related... 1, 2005, an area as defined in § 412.62(f)(1)(iii). For discharges occurring on or after October 1, 2005, rural area means an area as defined in § 412.64(b)(1)(ii)(C). Transfer means the release of a...

42 CFR 412.602 - Definitions.

Code of Federal Regulations, 2012 CFR

2012-10-01

... data items into the fields of the computerized patient assessment software program. Functional-related... 1, 2005, an area as defined in § 412.62(f)(1)(iii). For discharges occurring on or after October 1, 2005, rural area means an area as defined in § 412.64(b)(1)(ii)(C). Transfer means the release of a...

[Status of vitamin A, vitamin B2, iron and an-oxidantive activity in anemic pregnant women in China].

PubMed

Yang, Fang; Ma, Ai-Guo; Zhang, Xiu-Zhen; Jiang, Dian-Chen

2006-05-01

To investigate the status of vitamin A(VA), vitamin B2 (VB2), iron and anoxidative function in anemic and non-anemic pregnant women. 426 anemic and 36 non-anemic pregnant women were included in the study. The survey of 24-hour's diet recall of pregnant women was made to evaluate intake of iron, VB2, folic acid, etc by the nutrition software provided by Beijing 301 hospital, iron and VA were measured by Radioimmunoassay (RIA) and by high-pressure liquid chromatography. VB2 status was detected using the assay for erythrocyte glutathione reductase (Egr; EC 1.6.4.2) activity. SOD and GSH-Px activities and MDA were determined using commercial kits. Peripheral blood erythrocyte membrane fluidity was detected by using 1,6-diphenyl-1,3,5-hexatriene as a probe, the degree of fluorescence polarization (P) at 25 degrees C of disrupted cells plasma membranes were compared for a variety of systems. Median intakes of protein and vitamin C met the current Chinese RNIs for pregnancy, whereas intakes of(VA) and VB2 were well below the recommendations. Intake of iron were above 90%, but the main sources of iron are vegetables. Plasma VA (1.25 micromol/L) and iron (20.57 microg/L) were lower, BGRAC (1.79) was higher than that in non-anemia group (VA 1.57 micromol/L, SF 33.16 microg/L, BGRAC 1.52). The level of plasma SOD (77.1U/ml) and the activity of GSH-Px (61.9U) were lower than those in non-anemia group (92.2U/ml, 71.6U, P < 0.05), while MDA (4.58 nmol/ml) level and erythrocyte membrane (P = 0.2622, eta = 2.7465) fluidity were higher than those non-anemia group(MDA = 3.78 nmol/ ml, P = 0.2360, eta = 2.3658). Plasam VA, VB2 and iron, antioxidantcapacity and erythrocyte membrane fluidity were decreased in the anemic pregnant women.

Future Standardization of Space Telecommunications Radio System with Core Flight System

NASA Technical Reports Server (NTRS)

Hickey, Joseph P.; Briones, Janette C.; Roche, Rigoberto; Handler, Louis M.; Hall, Steven

2016-01-01

NASA Glenn Research Center (GRC) is integrating the NASA Space Telecommunications Radio System (STRS) Standard with the Core Flight System (cFS). The STRS standard provides a common, consistent framework to develop, qualify, operate and maintain complex, reconfigurable and reprogrammable radio systems. The cFS is a flexible, open architecture that features a plug-and-play software executive called the Core Flight Executive (cFE), a reusable library of software components for flight and space missions and an integrated tool suite. Together, STRS and cFS create a development environment that allows for STRS compliant applications to reference the STRS APIs through the cFS infrastructure. These APis are used to standardize the communication protocols on NASAs space SDRs. The cFE-STRS Operating Environment (OE) is a portable cFS library, which adds the ability to run STRS applications on existing cFS platforms. The purpose of this paper is to discuss the cFE-STRS OE prototype, preliminary experimental results performed using the Advanced Space Radio Platform (ASRP), the GRC Sband Ground Station and the SCaN (Space Communication and Navigation) Testbed currently flying onboard the International Space Station. Additionally, this paper presents a demonstration of the Consultative Committee for Space Data Systems (CCSDS) Spacecraft Onboard Interface Services (SOIS) using electronic data sheets inside cFE. This configuration allows for the data sheets to specify binary formats for data exchange between STRS applications. The integration of STRS with cFS leverages mission-proven platform functions and mitigates barriers to integration with future missions. This reduces flight software development time and the costs of software-defined radio (SDR) platforms. Furthermore, the combined benefits of STRS standardization with the flexibility of cFS provide an effective, reliable and modular framework to minimize software development efforts for spaceflight missions.

The effects of a shared, Intranet science learning environment on the academic behaviors of problem-solving and metacognitive reflection

NASA Astrophysics Data System (ADS)

Parker, Mary Jo

This study investigated the effects of a shared, Intranet science environment on the academic behaviors of problem-solving and metacognitive reflection. Seventy-eight subjects included 9th and 10th grade male and female biology students. A quasi-experimental design with pre- and post-test data collection and randomization occurring through assignment of biology classes to traditional or shared, Intranet learning groups was employed. Pilot, web-based distance education software (CourseInfo) created the Intranet learning environment. A modified ecology curriculum provided contextualization and content for traditional and shared learning environments. The effect of this environment on problem-solving, was measured using the standardized Watson-Glaser Critical Thinking Appraisal test. Metacognitive reflection, was measured in three ways: (a) number of concepts used, (b) number of concept links noted, and (c) number of concept nodes noted. Visual learning software, Inspiration, generated concept maps. Secondary research questions evaluated the pilot CourseInfo software for (a) tracked user movement, (b) discussion forum findings, and (c) difficulties experienced using CourseInfo software. Analysis of problem-solving group means reached no levels of significance resulting from the shared, Intranet environment. Paired t-Test of individual differences in problem-solving reached levels of significance. Analysis of metacognitive reflection by number of concepts reached levels of significance. Metacognitive reflection by number of concept links noted also reach significance. No significance was found for metacognitive reflection by number of concept nodes. No gender differences in problem-solving ability and metacognitive reflection emerged. Lack of gender differences in the shared, Intranet environment strongly suggests an equalizing effect due to the cooperative, collaborative nature of Intranet environments. Such environments appeal to, and rank high with, the female gender. Tracking learner movements in web-based, science environments has metacognitive and problem-solving learner implications. CourseInfo software offers one method of informing instruction within web-based learning environments focusing on academic behaviors. A shared, technology-supported learning environment may pose one model which science classrooms can use to create equitable scientific study across gender. The lack of significant differences resulting from this environment presents one model for improvement of individual problem-solving ability and metacognitive reflection across gender.

The Age-Related Orientational Changes of Human Semicircular Canals.

PubMed

Lyu, Hui-Ying; Chen, Ke-Guang; Yin, Dong-Ming; Hong, Juan; Yang, Lin; Zhang, Tian-Yu; Dai, Pei-Dong

2016-06-01

Some changes are found in the labyrinth anatomy during postnatal development. Although the spatial orientation of semicircular canals was thought to be stable after birth, we investigated the age-related orientational changes of human semicircular canals during development. We retrospectively studied the computed tomography (CT) images of both ears of 76 subjects ranged from 1 to 70 years old. They were divided into 4 groups: group A (1-6 years), group B (7-12 years), group C (13-18 years), and group D (>18 years). The anatomical landmarks of the inner ear structures were determined from CT images. Their coordinates were imported into MATLAB software for calculating the semicircular canals orientation, angles between semicircular canal planes and the jugular bulb (JB) position. Differences between age groups were analyzed using multivariate statistics. Relationships between variables were analyzed using Pearson analysis. The angle between the anterior semicircular canal plane and the coronal plane, and the angle between the horizontal semicircular canal plane and the coronal plane were smaller in group D than those in group A (P<0.05). The JB position, especially the anteroposterior position of right JB, correlated to the semicircular canals orientation (P<0.05). However, no statistically significant differences in the angles between ipsilateral canal planes among different age groups were found. The semicircular canals had tendencies to tilt anteriorly simultaneously as a whole with age. The JB position correlated to the spatial arrangement of semicircular canals, especially the right JB. Our calculation method helps detect developmental and pathological changes in vestibular anatomy.

A Tree Locality-Sensitive Hash for Secure Software Testing

DTIC Science & Technology

2017-09-14

errors, or to look for vulnerabilities that could allow a nefarious actor to use our software against us. Ultimately, all testing is designed to find...and an equivalent number of feasible paths discovered by Klee. 1.5 Summary This document the Tree Locality-Sensitive Hash (TLSH), a locality-senstive...performing two groups of tests that verify the accuracy and usefulness of TLSH. Chapter 5 summarizes the contents of the dissertation and lists avenues

Strategy for a DOD Software Initiative. Volume 2. Appendices

DTIC Science & Technology

1983-10-01

Druffel 9 PERFORMING ORGANIZATION NAME AND ADDRESS 1 10 . PROGRAM ELEMENT. PROJECT. TASK AREA 6 WORK UN17 NUMBERS Office of Under Secretary of Defense...New Approach j Lwering DoD Software Costs, Honeywell Aerospace and Defense Group, March 1982. 3 10 p - -q Recognizing that the opportunities and needs...Epstein, M. Fallon, R. A. Farrar, B. L. Fischer, Herman Fisher, Dave Fowler, Northrup, III Fox, Joseph Frager, David S. Frank, Geoffrey A. Fredette

2005 5th Annual CMMI Technology Conference and User Group. Volume 1: Monday

DTIC Science & Technology

2005-11-17

OF TOTAL EFFORT WORK 59% REWORK 41% By the numbers: the impact of requirements Dion, DIO1 McConnell, MCC1 Davis, DAV1, Novorita, NOV1 - 66% to 55% 55...1996, Rational Software Corporation DAV2 http://mozart.uccs.edu/adavis/reqbib.html Requirements management bibliography DIO1 http

Molecular Dynamics Simulation of Calbindin D9k in Apo, Singly and Doubly Loaded States in Various Side-Chains

NASA Astrophysics Data System (ADS)

Thapa, Mahendra Bahadur

Calbindin D9k (CAB) is a single domain calcium-binding protein and is the smallest members of the calmodulin superfamily, possessing a pair of calcium-binding EF-hands, and structures for all four states have been determined and extensively characterized experimentally. Because of the tremendous advancement in hardware and software computer technologies in recent years, longer and more realistic molecular dynamics (MD) simulations of a protein are possible now in reasonable periods of time. These advances were exploited to generate multiple, all-atom MD simulations of CAB via the AMBER software package, and the resulting trajectories were employed to calculate backbone order parameters of the apo, the singly and the doubly loaded states of calcium in CAB. The results are in very good agreement with corresponding experimental NMR-based (Nuclear Magnetic Resonance spectroscopy) results, and are improved in comparison to those calculated over a decade ago; use of modified force fields played a key role in the observed improvements. The apo state is the most flexible, and the singly loaded and the doubly loaded states are similar, thus supporting positive cooperativity in line with the experimental results. Further, B-factor calculations of backbone atoms for these calcium-binding states of calbindin D9k also support such cooperativity. Although changes in side-chain motions are not necessarily correlated to changes in protein backbone mobility, past studies on the comparison of experimental and simulated methyl side-chain NMR relaxation parameters of CAB for the doubly-loaded state reported significant improvements in the quantitative representation of side-chain motion by MD simulation. In this project, the order parameters for various side chains in apo, singly loaded and doubly loaded states of CAB were calculated. The primary goal of this work was to determine whether or not the allosteric effect of calcium binding, as observed via the backbone order parameters, also extended to the amino acid side chains, and if so, to what extent. Such information could be useful in better understanding the physical basis of cooperative calcium binding in CAB. Most of the residues which provide ligands to bind calcium at the binding sites support positive cooperativity, as observed when Ca-Cß, Cß-C?, C-C bond and C-O bonds of COO groups of aspartic and glutamic acid residues, the C-N bond of the side-chain amide group in asparagine and glutamine residues, and the N-H bonds of amide (NH2) group order parameters were studied. There are only a few residues containing methyl groups that are involved in providing ligands to the calcium, and the studies of order parameters of C-C bond and C-H bond of these methyl groups did not exhibit the cooperativity effect upon calcium binding; the simulated C-C bond order parameter of the methyl group symmetry axis did correlate well with the experimental results for the fully loaded state of CAB (4ICB). Analysis of the MD trajectories using GSATools and MutInf, provided valuable insights into possible pathways for communicating allosteric effects between the two calcium-binding sites of CAB.

Development and Validation of an Agency for Healthcare Research and Quality Indicator for Mortality After Congenital Heart Surgery Harmonized With Risk Adjustment for Congenital Heart Surgery (RACHS-1) Methodology.

PubMed

Jenkins, Kathy J; Koch Kupiec, Jennifer; Owens, Pamela L; Romano, Patrick S; Geppert, Jeffrey J; Gauvreau, Kimberlee

2016-05-20

The National Quality Forum previously approved a quality indicator for mortality after congenital heart surgery developed by the Agency for Healthcare Research and Quality (AHRQ). Several parameters of the validated Risk Adjustment for Congenital Heart Surgery (RACHS-1) method were included, but others differed. As part of the National Quality Forum endorsement maintenance process, developers were asked to harmonize the 2 methodologies. Parameters that were identical between the 2 methods were retained. AHRQ's Healthcare Cost and Utilization Project State Inpatient Databases (SID) 2008 were used to select optimal parameters where differences existed, with a goal to maximize model performance and face validity. Inclusion criteria were not changed and included all discharges for patients <18 years with International Classification of Diseases, Ninth Revision, Clinical Modification procedure codes for congenital heart surgery or nonspecific heart surgery combined with congenital heart disease diagnosis codes. The final model includes procedure risk group, age (0-28 days, 29-90 days, 91-364 days, 1-17 years), low birth weight (500-2499 g), other congenital anomalies (Clinical Classifications Software 217, except for 758.xx), multiple procedures, and transfer-in status. Among 17 945 eligible cases in the SID 2008, the c statistic for model performance was 0.82. In the SID 2013 validation data set, the c statistic was 0.82. Risk-adjusted mortality rates by center ranged from 0.9% to 4.1% (5th-95th percentile). Congenital heart surgery programs can now obtain national benchmarking reports by applying AHRQ Quality Indicator software to hospital administrative data, based on the harmonized RACHS-1 method, with high discrimination and face validity. © 2016 The Authors. Published on behalf of the American Heart Association, Inc., by Wiley Blackwell.

Big Software for SmallSats: Adapting CFS to CubeSat Missions

NASA Technical Reports Server (NTRS)

Cudmore, Alan P.; Crum, Gary; Sheikh, Salman; Marshall, James

2015-01-01

Expanding capabilities and mission objectives for SmallSats and CubeSats is driving the need for reliable, reusable, and robust flight software. While missions are becoming more complicated and the scientific goals more ambitious, the level of acceptable risk has decreased. Design challenges are further compounded by budget and schedule constraints that have not kept pace. NASA's Core Flight Software System (cFS) is an open source solution which enables teams to build flagship satellite level flight software within a CubeSat schedule and budget. NASA originally developed cFS to reduce mission and schedule risk for flagship satellite missions by increasing code reuse and reliability. The Lunar Reconnaissance Orbiter, which launched in 2009, was the first of a growing list of Class B rated missions to use cFS. Large parts of cFS are now open source, which has spurred adoption outside of NASA. This paper reports on the experiences of two teams using cFS for current CubeSat missions. The performance overheads of cFS are quantified, and the reusability of code between missions is discussed. The analysis shows that cFS is well suited to use on CubeSats and demonstrates the portability and modularity of cFS code.

Software Defined Radio with Parallelized Software Architecture

NASA Technical Reports Server (NTRS)

Heckler, Greg

2013-01-01

This software implements software-defined radio procession over multicore, multi-CPU systems in a way that maximizes the use of CPU resources in the system. The software treats each processing step in either a communications or navigation modulator or demodulator system as an independent, threaded block. Each threaded block is defined with a programmable number of input or output buffers; these buffers are implemented using POSIX pipes. In addition, each threaded block is assigned a unique thread upon block installation. A modulator or demodulator system is built by assembly of the threaded blocks into a flow graph, which assembles the processing blocks to accomplish the desired signal processing. This software architecture allows the software to scale effortlessly between single CPU/single-core computers or multi-CPU/multi-core computers without recompilation. NASA spaceflight and ground communications systems currently rely exclusively on ASICs or FPGAs. This software allows low- and medium-bandwidth (100 bps to approx.50 Mbps) software defined radios to be designed and implemented solely in C/C++ software, while lowering development costs and facilitating reuse and extensibility.

Software Defined Radio with Parallelized Software Architecture

NASA Technical Reports Server (NTRS)

Heckler, Greg

2013-01-01

This software implements software-defined radio procession over multi-core, multi-CPU systems in a way that maximizes the use of CPU resources in the system. The software treats each processing step in either a communications or navigation modulator or demodulator system as an independent, threaded block. Each threaded block is defined with a programmable number of input or output buffers; these buffers are implemented using POSIX pipes. In addition, each threaded block is assigned a unique thread upon block installation. A modulator or demodulator system is built by assembly of the threaded blocks into a flow graph, which assembles the processing blocks to accomplish the desired signal processing. This software architecture allows the software to scale effortlessly between single CPU/single-core computers or multi-CPU/multi-core computers without recompilation. NASA spaceflight and ground communications systems currently rely exclusively on ASICs or FPGAs. This software allows low- and medium-bandwidth (100 bps to .50 Mbps) software defined radios to be designed and implemented solely in C/C++ software, while lowering development costs and facilitating reuse and extensibility.

Construction of an integrated genetic map for Capsicum baccatum L.

PubMed

Moulin, M M; Rodrigues, R; Ramos, H C C; Bento, C S; Sudré, C P; Gonçalves, L S A; Viana, A P

2015-06-18

Capsicum baccatum L. is one of the five Capsicum domesticated species and has multiple uses in the food, pharmaceutical and cosmetic industries. This species is also a valuable source of genes for chili pepper breeding, especially genes for disease resistance and fruit quality. However, knowledge of the genetic structure of C. baccatum is limited. A reference map for C. baccatum (2n = 2x = 24) based on 42 microsatellite, 85 inter-simple sequence repeat, and 56 random amplified polymorphic DNA markers was constructed using an F2 population consisting of 203 individuals. The map was generated using the JoinMap software (version 4.0) and the linkage groups were formed and ordered using a LOD score of 3.0 and maximum of 40% recombination. The genetic map consisted of 12 major and four minor linkage groups covering a total genome distance of 2547.5 cM with an average distance of 14.25 cM between markers. Of the 152 pairs of microsatellite markers available for Capsicum annuum, 62 were successfully transferred to C. baccatum, generating polymorphism. Forty-two of these markers were mapped, allowing the introduction of C. baccatum in synteny studies with other species of the genus Capsicum.

UWB Tracking Software Development

NASA Technical Reports Server (NTRS)

Gross, Julia; Arndt, Dickey; Ngo, Phong; Phan, Chau; Dusl, John; Ni, Jianjun; Rafford, Melinda

2006-01-01

An Ultra-Wideband (UWB) two-cluster Angle of Arrival (AOA) tracking prototype system is currently being developed and tested at NASA Johnson Space Center for space exploration applications. This talk discusses the software development efforts for this UWB two-cluster AOA tracking system. The role the software plays in this system is to take waveform data from two UWB radio receivers as an input, feed this input into an AOA tracking algorithm, and generate the target position as an output. The architecture of the software (Input/Output Interface and Algorithm Core) will be introduced in this talk. The development of this software has three phases. In Phase I, the software is mostly Matlab driven and calls C++ socket functions to provide the communication links to the radios. This is beneficial in the early stage when it is necessary to frequently test changes in the algorithm. Phase II of the development is to have the software mostly C++ driven and call a Matlab function for the AOA tracking algorithm. This is beneficial in order to send the tracking results to other systems and also to improve the tracking update rate of the system. The third phase is part of future work and is to have the software completely C++ driven with a graphics user interface. This software design enables the fine resolution tracking of the UWB two-cluster AOA tracking system.

ATM Technology Demonstration-1 Phase II Boeing Configurable Graphical Display (CGD) Software Design Description

NASA Technical Reports Server (NTRS)

Wilber, George F.

2017-01-01

This Software Description Document (SDD) captures the design for developing the Flight Interval Management (FIM) system Configurable Graphics Display (CGD) software. Specifically this SDD describes aspects of the Boeing CGD software and the surrounding context and interfaces. It does not describe the Honeywell components of the CGD system. The SDD provides the system overview, architectural design, and detailed design with all the necessary information to implement the Boeing components of the CGD software and integrate them into the CGD subsystem within the larger FIM system. Overall system and CGD system-level requirements are derived from the CGD SRS (in turn derived from the Boeing System Requirements Design Document (SRDD)). Display and look-and-feel requirements are derived from Human Machine Interface (HMI) design documents and working group recommendations. This Boeing CGD SDD is required to support the upcoming Critical Design Review (CDR).

Developing a Software for Fuzzy Group Decision Support System: A Case Study

ERIC Educational Resources Information Center

Baba, A. Fevzi; Kuscu, Dincer; Han, Kerem

2009-01-01

The complex nature and uncertain information in social problems required the emergence of fuzzy decision support systems in social areas. In this paper, we developed user-friendly Fuzzy Group Decision Support Systems (FGDSS) software. The software can be used for multi-purpose decision making processes. It helps the users determine the main and…

Use of a Wiki-Based Software to Manage Research Group Activities

ERIC Educational Resources Information Center

Wang, Ting; Vezenov, Dmitri V.; Simboli, Brian

2014-01-01

This paper discusses use of the wiki software Confluence to organize research group activities and lab resources. Confluence can serve as an electronic lab notebook (ELN), as well as an information management and collaboration tool. The article provides a case study in how researchers can use wiki software in "home-grown" fashion to…

Effects of resin luting agents and 1% NaOCl on the marginal fit of indirect composite restorations in primary teeth

PubMed Central

BORGES, Ana Flávia Sanches; SIMONATO, Luciana Estevam; PASCON, Fernanda Miori; KANTOWITZ, Kamila Rosamiglia; RONTANI, Regina Maria Puppin

2011-01-01

Objective The purpose of this study was to provide information regarding the marginal adaptation of composite resin onlays in primary teeth previously treated with 1% sodium hypochlorite (NaOCl) (pulp irrigant) using two different resin luting agents. Material and Methods Forty extracted sound primary molars had their crowns prepared in a standardized machine and were randomly divided into 4 groups (n=10): G1 (1% NaOCl irrigation+EnForce); G2 (EnForce); G3 (1% NaOCl irrigation+Rely X); G4 (Rely X). The onlays were made with Z250 composite resin on plaster models. After luting, the tooth/restoration set was stored in 100% relative humidity at 37ºC for 24 h and finished with Soflex discs. Caries Detector solution was applied at the tooth/restoration interface for 5 s. The specimens were washed and four digital photos of each tooth were then taken. The extents of the gaps were measured with Image Tool 3.0 software. The percentage data were submitted to a Kruskal-Wallis test (α=0.05). The Relative Risk test analyzed the chance of a gap presence correlated to each group. Results There were no statistically significant differences (p>0.05) among the groups. The relative risk test revealed that some groups were more apt to have a presence of gaps than others. Conclusion Neither the 1% NaOCl treatment nor the resin luting agents caused any alterations in the dental substrate that could have influenced the marginal adaptation of composite onlays in primary teeth. PMID:21986649

Proceedings of the 1981 Army Numerical Analysis and Computers Conference, held U. S. Army Missile Command, Redstone Arsenal, Alabama, 26-27 February 1981

DTIC Science & Technology

1981-08-01

loaded Loading done Time= 1295 msec. SQRT(3) %I + 1 SQRT(3) %I - 1 SQRT(3) %I f 1 (D13) TX = 1---------+-1** x = C-l---+-------, x = - 1, x...thnrl its competitors. As is to be expected, the table makes cJc ;lr the benefits of subincrement ing for nny approximation. For example, usiny the...Acquisition Systems ( DACS ) and a Data Analysis System (DAN), The DACs will be microprocessor-based recording devices with software-control

Tests of Rock Cores Michigamme Study Area, Michigan

DTIC Science & Technology

1970-06-01

cca;c-rraincd tona- l ".1 ., reck with dis - ’ pte, --’gmatite bands. MG-CR-26 SAMcO-9, DC-2 2 17 Black and white, medium- grtlned gn.insic ,onalite. I...4 . :t:::*.::: l N . . ......... 20,000 W:., ..... ... ... ... ...... ....... ... . .1. 1:: t: :1:1:1 N.: .111:::: Fiji. milIA : -mit: 15.00C :N...PCS13.60/MF$3.00 SutrdPormigSre.Vl l siae V Bilogcal ervcesProgam.Fisal Yar 975Software Project Resource Requirement* PADA251 738/PAT 52 p PC$4.50

Enhancing Collaborative Learning through Group Intelligence Software

NASA Astrophysics Data System (ADS)

Tan, Yin Leng; Macaulay, Linda A.

Employers increasingly demand not only academic excellence from graduates but also excellent interpersonal skills and the ability to work collaboratively in teams. This paper discusses the role of Group Intelligence software in helping to develop these higher order skills in the context of an enquiry based learning (EBL) project. The software supports teams in generating ideas, categorizing, prioritizing, voting and multi-criteria decision making and automatically generates a report of each team session. Students worked in a Group Intelligence lab designed to support both face to face and computer-mediated communication and employers provided feedback at two key points in the year long team project. Evaluation of the effectiveness of Group Intelligence software in collaborative learning was based on five key concepts of creativity, participation, productivity, engagement and understanding.