Optimization in the systems engineering process

NASA Technical Reports Server (NTRS)

Lemmerman, Loren A.

1993-01-01

The essential elements of the design process consist of the mission definition phase that provides the system requirements, the conceptual design, the preliminary design and finally the detailed design. Mission definition is performed largely by operations analysts in conjunction with the customer. The result of their study is handed off to the systems engineers for documentation as the systems requirements. The document that provides these requirements is the basis for the further design work of the design engineers at the Lockheed-Georgia Company. The design phase actually begins with conceptual design, which is generally conducted by a small group of engineers using multidisciplinary design programs. Because of the complexity of the design problem, the analyses are relatively simple and generally dependent on parametric analyses of the configuration. The result of this phase is a baseline configuration from which preliminary design may be initiated.

A Review of Computerized Team Performance Measures to Identify Military-Relevant, Low-to-Medium Fidelity Tests of Small Group Effectiveness during Shared Information Processing

DTIC Science & Technology

2012-05-01

Alexandria, Virginia 22314. Orders will be expedited if placed through the librarian or other person designated to request documents from DTIC...an official Department of the Army position, policy, or decision, unless so designated by other official documentation. Citation of trade names in...teamwork and evaluate the effectiveness of team training methods (Baker and Salas, 1997). Additionally, good measures of team performance should aid the

We Scrum Every Day: Using Scrum Project Management Framework for Group Projects

ERIC Educational Resources Information Center

Pope-Ruark, Rebecca

2012-01-01

Collaborative group projects have documented learning benefits, yet collaboration is challenging for students because the educational system values individual achievement. This article explores Scrum, an approach to framing, planning, and managing group projects used in Web-software development. Designed for multi-faceted projects, this approach…

78 FR 39736 - Draft Guidance for Industry: Considerations for the Design of Early-Phase Clinical Trials of...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-07-02

..., choosing a study population, using a control group and blinding, dose selection, treatment plans...] Draft Guidance for Industry: Considerations for the Design of Early-Phase Clinical Trials of Cellular... document entitled ``Guidance for Industry: Considerations for the Design of Early-Phase Clinical Trials of...

Web-based document image processing

NASA Astrophysics Data System (ADS)

Walker, Frank L.; Thoma, George R.

1999-12-01

Increasing numbers of research libraries are turning to the Internet for electron interlibrary loan and for document delivery to patrons. This has been made possible through the widespread adoption of software such as Ariel and DocView. Ariel, a product of the Research Libraries Group, converts paper-based documents to monochrome bitmapped images, and delivers them over the Internet. The National Library of Medicine's DocView is primarily designed for library patrons are beginning to reap the benefits of this new technology, barriers exist, e.g., differences in image file format, that lead to difficulties in the use of library document information. To research how to overcome such barriers, the Communications Engineering Branch of the Lister Hill National Center for Biomedical Communications, an R and D division of NLM, has developed a web site called the DocMorph Server. This is part of an ongoing intramural R and D program in document imaging that has spanned many aspects of electronic document conversion and preservation, Internet document transmission and document usage. The DocMorph Server Web site is designed to fill two roles. First, in a role that will benefit both libraries and their patrons, it allows Internet users to upload scanned image files for conversion to alternative formats, thereby enabling wider delivery and easier usage of library document information. Second, the DocMorph Server provides the design team an active test bed for evaluating the effectiveness and utility of new document image processing algorithms and functions, so that they may be evaluated for possible inclusion in other image processing software products being developed at NLM or elsewhere. This paper describes the design of the prototype DocMorph Server and the image processing functions being implemented on it.

The Effects of a Web-Based Nursing Process Documentation Program on Stress and Anxiety of Nursing Students in South Korea.

PubMed

Lee, Eunjoo; Noh, Hyun Kyung

2016-01-01

To examine the effects of a web-based nursing process documentation system on the stress and anxiety of nursing students during their clinical practice. A quasi-experimental design was employed. The experimental group (n = 110) used a web-based nursing process documentation program for their case reports as part of assignments for a clinical practicum, whereas the control group (n = 106) used traditional paper-based case reports. Stress and anxiety levels were measured with a numeric rating scale before, 2 weeks after, and 4 weeks after using the web-based nursing process documentation program during a clinical practicum. The data were analyzed using descriptive statistics, t tests, chi-square tests, and repeated-measures analyses of variance. Nursing students who used the web-based nursing process documentation program showed significant lower levels of stress and anxiety than the control group. A web-based nursing process documentation program could be used to reduce the stress and anxiety of nursing students during clinical practicum, which ultimately would benefit nursing students by increasing satisfaction with and effectiveness of clinical practicum. © 2015 NANDA International, Inc.

The Fantastic Facilitator: Engaging Activities for Leading Groups.

ERIC Educational Resources Information Center

Duttweiler, Patricia Cloud

This document is designed to help facilitators with the formation and development of effective teams of people who have no previous history as a team and no training in group processes. Part 1 provides a narrative explanation of the stages of group development (investing in membership, forming attachments to subgroups, confronting/debating issues,…

User-Centered Design and Printed Educational Materials: A Focus Group Study of Primary Care Physician Preferences.

PubMed

Grudniewicz, Agnes; Bhattacharyya, Onil; McKibbon, K Ann; Straus, Sharon E

2016-01-01

It is challenging for primary care physicians (PCPs) to review and apply the growing amount of clinical evidence available. Printed educational materials (PEMs), which synthesize evidence, are often ineffective at improving knowledge, possibly due to poor design and limited uptake. In this study, we collected PCP preferences for the design and content of physician-oriented PEMs and determined key attributes that may increase their usability and uptake. We held 90-minute focus groups with PCPs in Toronto, ON, Canada. Focus groups included discussion about whether and how participants use PEMs, feedback on three examples of PEMs, and a discussion on general format and design preferences in PEMs. We analyzed focus group transcripts using a thematic analysis and summarized results in a list of user preferences. Four focus groups were held with 13 PCPs. We found that participants only read PEMs relevant to their patients and prefer short, concise documents, with links to sources that can provide more detailed information. Simplicity of materials was important, with many participants preferring PEMs without lengthy backgrounds or scientific explanations. Most participants wanted to see key messages highlighted to easily assess the relevance of the materials to their practice. Some participants shared physician-oriented PEMs with patients. This study shows that PCPs may prefer shorter, simpler, and more concise documents that have less scientific detail but provide references to further information sources. It is important to understand end user preferences for the design and content of these materials to enhance their uptake.

Forensic intelligence applied to questioned document analysis: A model and its application against organized crime.

PubMed

De Alcaraz-Fossoul, Josep; Roberts, Katherine A

2017-07-01

The capability of forensic sciences to fight crime, especially against organized criminal groups, becomes relevant in the recent economic downturn and the war on terrorism. In view of these societal challenges, the methods of combating crime should experience critical changes in order to improve the effectiveness and efficiency of the current resources available. It is obvious that authorities have serious difficulties combating criminal groups of transnational nature. These are characterized as well structured organizations with international connections, abundant financial resources and comprised of members with significant and diverse expertise. One common practice among organized criminal groups is the use of forged documents that allow for the commission of illegal cross-border activities. Law enforcement can target these movements to identify counterfeits and establish links between these groups. Information on document falsification can become relevant to generate forensic intelligence and to design new strategies against criminal activities of this nature and magnitude. This article discusses a methodology for improving the development of forensic intelligence in the discipline of questioned document analysis. More specifically, it focuses on document forgeries and falsification types used by criminal groups. It also describes the structure of international criminal organizations that use document counterfeits as means to conduct unlawful activities. The model presented is partially based on practical applications of the system that have resulted in satisfactory outcomes in our laboratory. Copyright © 2017 The Chartered Society of Forensic Sciences. Published by Elsevier B.V. All rights reserved.

Computer Applications Group FY91 final report, February 11, 1991--September 30, 1991

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

1992-02-24

This Functional Requirements Document (FRD) defines the functional requirements and general solutions required for design of the Integrated Data System (IDS). The FRD is the primary source of requirements for the designers and all requirements used in the design process shall be part of this or succeeding revisions of the FRD with no exceptions.

Manufacturing and quality control of interconnecting wire harnesses, Volume 4

NASA Technical Reports Server (NTRS)

1972-01-01

The document covers interconnecting wire harnesses defined in the design standard, including type 8, flat conductor cable. Volume breadth covers installations of groups of harnesses in a major assembly and the associated post installation inspections and electrical tests. Knowledge gained through experience on the Saturn 5 program coupled with recent advances in techniques, materials, and processes was incorporated into this document.

Using an educational electronic documentation system to help nursing students accurately identify patient data.

PubMed

Pobocik, Tamara

2015-01-01

This quantitative research study used a pretest/posttest design and reviewed how an educational electronic documentation system helped nursing students to identify the accurate "related to" statement of the nursing diagnosis for the patient in the case study. Students in the sample population were senior nursing students in a bachelor of science nursing program in the northeastern United States. Two distinct groups were used for a control and intervention group. The intervention group used the educational electronic documentation system for three class assignments. Both groups were given a pretest and posttest case study. The Accuracy Tool was used to score the students' responses to the related to statement of a nursing diagnosis given at the end of the case study. The scores of the Accuracy Tool were analyzed, and then the numeric scores were placed in SPSS, and the paired t test scores were analyzed for statistical significance. The intervention group's scores were statistically different from the pretest scores to posttest scores, while the control group's scores remained the same from pretest to posttest. The recommendation to nursing education is to use the educational electronic documentation system as a teaching pedagogy to help nursing students prepare for nursing practice. © 2014 NANDA International, Inc.

Testing a Nursing-Specific Model of Electronic Patient Record documentation with regard to information completeness, comprehensiveness and consistency.

PubMed

von Krogh, Gunn; Nåden, Dagfinn; Aasland, Olaf Gjerløw

2012-10-01

To present the results from the test site application of the documentation model KPO (quality assurance, problem solving and caring) designed to impact the quality of nursing information in electronic patient record (EPR). The KPO model was developed by means of consensus group and clinical testing. Four documentation arenas and eight content categories, nursing terminologies and a decision-support system were designed to impact the completeness, comprehensiveness and consistency of nursing information. The testing was performed in a pre-test/post-test time series design, three times at a one-year interval. Content analysis of nursing documentation was accomplished through the identification, interpretation and coding of information units. Data from the pre-test and post-test 2 were subjected to statistical analyses. To estimate the differences, paired t-tests were used. At post-test 2, the information is found to be more complete, comprehensive and consistent than at pre-test. The findings indicate that documentation arenas combining work flow and content categories deduced from theories on nursing practice can influence the quality of nursing information. The KPO model can be used as guide when shifting from paper-based to electronic-based nursing documentation with the aim of obtaining complete, comprehensive and consistent nursing information. © 2012 Blackwell Publishing Ltd.

Virtual Project Rooms for Education in Engineering

ERIC Educational Resources Information Center

van Vliet, Rudolf G.; Roeling, Monika M.; de Graaff, Rick; Pilot, Albert

2004-01-01

Virtual project rooms (VPRs) may support collaborative project-based learning groups by facilitating project management, documentation and communication. In this study a set of experiments was carried out at Eindhoven University of Technology using the MS Outlook/Exchange software as a groupware platform for design-oriented group projects. The…

ArtBreak Group Counseling for Children: Framework, Practice Points, and Results

ERIC Educational Resources Information Center

Ziff, Katherine; Ivers, Nathaniel N.; Shaw, Edward G.

2016-01-01

Child social/emotional development and mitigation of child stress are receiving continued emphasis in the literature. While choice-based group art studios have a long association with mental health, documentation on their potential for supporting children is limited. This article describes an elementary school counseling intervention designed to…

Formulating a Serious-Games Design Project for Adult Offenders with the Probation Service

ERIC Educational Resources Information Center

Bates, Matthew Ian; Brown, David; Cranton, Wayne; Lewis, James

2011-01-01

This paper documents an investigation evaluating if adult offenders can benefit from a facilitated serious-games design project as part of their probation program. Research has observed a participatory design group of adult offenders working with their probation managers and a PhD researcher to create a new serious-game for use by the probation…

TERMTrial--terminology-based documentation systems for cooperative clinical trials.

PubMed

Merzweiler, A; Weber, R; Garde, S; Haux, R; Knaup-Gregori, P

2005-04-01

Within cooperative groups of multi-center clinical trials a standardized documentation is a prerequisite for communication and sharing of data. Standardizing documentation systems means standardizing the underlying terminology. The management and consistent application of terminology systems is a difficult and fault-prone task, which should be supported by appropriate software tools. Today, documentation systems for clinical trials are often implemented as so-called Remote-Data-Entry-Systems (RDE-systems). Although there are many commercial systems, which support the development of RDE-systems there is none offering a comprehensive terminological support. Therefore, we developed the software system TERMTrial which consists of a component for the definition and management of terminology systems for cooperative groups of clinical trials and two components for the terminology-based automatic generation of trial databases and terminology-based interactive design of electronic case report forms (eCRFs). TERMTrial combines the advantages of remote data entry with a comprehensive terminological control.

Data Needs in Vocational Education. "The Development of a Minimal Information System to Satisfy the Needs of Selected User Groups." Final Report. Volume III. Project EDNEED Lexicon.

ERIC Educational Resources Information Center

Nerden, J. T.; And Others

Designed for the exclusive purpose of accompanying the Project EDNEED (Empirical Determination of Nationally Essential Educational Data) classification document, this volume comprises the third of a five-volume final report. It provides uniform definitions for vocational education terms found in the EDNEED classification document, and aids in…

A nursing-specific model of EPR documentation: organizational and professional requirements.

PubMed

von Krogh, Gunn; Nåden, Dagfinn

2008-01-01

To present the Norwegian documentation KPO model (quality assurance, problem solving, and caring). To present the requirements and multiple electronic patient record (EPR) functions the model is designed to address. The model's professional substance, a conceptual framework for nursing practice is developed by examining, reorganizing, and completing existing frameworks. The model's methodology, an information management system, is developed using an expert group. Both model elements were clinically tested over a period of 1 year. The model is designed for nursing documentation in step with statutory, organizational, and professional requirements. Complete documentation is arranged for by incorporating the Nursing Minimum Data Set. A systematic and comprehensive documentation is arranged for by establishing categories as provided in the model's framework domains. Consistent documentation is arranged for by incorporating NANDA-I Nursing Diagnoses, Nursing Intervention Classification, and Nursing Outcome Classification. The model can be used as a tool in cooperation with vendors to ensure the interests of the nursing profession is met when developing EPR solutions in healthcare. The model can provide clinicians with a framework for documentation in step with legal and organizational requirements and at the same time retain the ability to record all aspects of clinical nursing.

JPRS Report, Soviet Union, EKO: Economics & Organization of Industrial Production, No. 10, October 1987.

DTIC Science & Technology

1988-02-29

pecially "cost-accounting" ones) do not so much control enterprises as grow together with them and give them protection in gaining group advantage...important document points out that the state standards of the SRPP should contain the following groups : general provisions; scientific research work... research institutes and design bureaus of their branch, 1—from scientific research institutes and design bureaus of other branches, and 1—from the

Improved clinical documentation leads to superior reportable outcomes: An accurate representation of patient's clinical status.

PubMed

Elkbuli, Adel; Godelman, Steven; Miller, Ashley; Boneva, Dessy; Bernal, Eileen; Hai, Shaikh; McKenney, Mark

2018-05-01

Clinical documentation can be an underappreciated. Trauma Centers (TCs) are now routinely evaluated for quality performance. TCs with poor documentation may not accurately reflect actual injury burden or comorbidities and can impact accuracy of mortality measures. Markers exist to adjust crude death rates for injury severity: observed over expected deaths (O/E) adjust for injury; Case Mix Index (CMI) reflects disease burden, and Severity of Illness (SOI) measures organ dysfunction. We aim to evaluate the impact of implementing a Clinical Documentation Improvement Program (CDIP) on reported outcomes. Review of 2-years of prospectively collected data for trauma patients, during the implementation of CDIP. A two-group prospective observational study design was used to evaluate the pre-implementation and the post-implementation phase of improved clinical documentation. T-test and Chi-Squared were used with significance defined as p < 0.05. In the pre-implementation period, there were 49 deaths out of 1419 (3.45%), while post-implementation period, had 38 deaths out of 1454 (2.61%), (non-significant). There was however, a significant difference between O/E ratios. In the pre-phase, the O/E was 1.36 and 0.70 in the post-phase (p < 0.001). The two groups also differed on CMI with a pre-group mean of 2.48 and a post-group of 2.87 (p < 0.001), indicating higher injury burden in the post-group. SOI started at 2.12 and significantly increased to 2.91, signifying more organ system dysfunction (p < 0.018). Improved clinical documentation results in improved accuracy of measures of mortality, injury severity, and comorbidities and a more accurate reflection in O/E mortality ratios, CMI, and SOI. Copyright © 2018 IJS Publishing Group Ltd. Published by Elsevier Ltd. All rights reserved.

Effectiveness of the Smoking Cessation and Reduction in Pregnancy Treatment (SCRIPT) dissemination project: a science to prenatal care practice partnership.

PubMed

Windsor, Richard; Clark, Jeannie; Cleary, Sean; Davis, Amanda; Thorn, Stephanie; Abroms, Lorien; Wedeles, John

2014-01-01

This study evaluated the effectiveness of the Smoking Cessation and Reduction in Pregnancy Treatment (SCRIPT) Program selected by the West Virginia-Right From The Start Project for state-wide dissemination. A process evaluation documented the fidelity of SCRIPT delivery by Designated Care Coordinators (DCC), licensed nurses and social workers who provide home-based case management to Medicaid-eligible clients in all 55 counties. We implemented a quasi-experimental, non-randomized, matched Comparison (C) Group design. The SCRIPT Experimental E Group (N = 259) were all clients in 2009-2010 that wanted to quit, provided a screening carbon monoxide (CO), and received a SCRIPT home visit. The (C) Group was derived from all clients in 2006-2007 who had the same CO assessments as E Group clients and reported receiving cessation counseling. We stratified the baseline CO of E Group clients into 10 strata, and randomly selected the same number of (C) Group clients (N = 259) from each matched strata to evaluate the effectiveness of the SCRIPT Program. There were no significant baseline differences in the E and (C) Group. A Process Evaluation documented a significant increase in the fidelity of DCC delivery of SCRIPT Program procedures: from 63 % in 2006 to 74 % in 2010. Significant increases were documented in the E Group cessation rate (+9.3 %) and significant reduction rate (+4.5 %), a ≥50 % reduction from a baseline CO. Perinatal health case management staff can deliver the SCRIPT Program, and Medicaid-supported clients can change smoking behavior, even very late in pregnancy. When multiple biases were analyzed, we concluded the SCRIPT Dissemination Project was the most plausible reason for the significant changes in behavior.

How and Why of User Studies: RLG's RedLightGreen as a Case Study

ERIC Educational Resources Information Center

Proffitt, Merrilee

2006-01-01

This article documents a lifecycle approach to employing user-centered design, covering both qualitative and quantitative data gathering methods in support of using this approach for product design, usability testing, and market research. The author provides specific case studies of usability studies, focus groups, interviews, ethnographic…

On the utility of within-participant research design when working with patients with neurocognitive disorders

PubMed Central

Steingrimsdottir, Hanna Steinunn; Arntzen, Erik

2015-01-01

Within-participant research designs are frequently used within the field of behavior analysis to document changes in behavior before, during, and after treatment. The purpose of the present article is to show the utility of within-participant research designs when working with older adults with neurocognitive disorders. The reason for advocating for these types of experimental designs is that they provide valid information about whether the changes that are observed in the dependent variable are caused by manipulations of the independent variable, or whether the change may be due to other variables. We provide examples from published papers where within-participant research design has been used with patients with neurocognitive disorders. The examples vary somewhat, demonstrating possible applications. It is our suggestion that the within-participant research design may be used more often with the targeted client group than is documented in the literature at the current date. PMID:26229453

On the utility of within-participant research design when working with patients with neurocognitive disorders.

PubMed

Steingrimsdottir, Hanna Steinunn; Arntzen, Erik

2015-01-01

Within-participant research designs are frequently used within the field of behavior analysis to document changes in behavior before, during, and after treatment. The purpose of the present article is to show the utility of within-participant research designs when working with older adults with neurocognitive disorders. The reason for advocating for these types of experimental designs is that they provide valid information about whether the changes that are observed in the dependent variable are caused by manipulations of the independent variable, or whether the change may be due to other variables. We provide examples from published papers where within-participant research design has been used with patients with neurocognitive disorders. The examples vary somewhat, demonstrating possible applications. It is our suggestion that the within-participant research design may be used more often with the targeted client group than is documented in the literature at the current date.

Prototype Interoperability Document between NASA-JSC and DLR-GSOC Describing the CCSDS SM and C Mission Operations Prototype

NASA Technical Reports Server (NTRS)

Lucord, Steve A.; Gully, Sylvain

2009-01-01

The purpose of the PROTOTYPE INTEROPERABILITY DOCUMENT is to document the design and interfaces for the service providers and consumers of a Mission Operations prototype between JSC-OTF and DLR-GSOC. The primary goal is to test the interoperability sections of the CCSDS Spacecraft Monitor & Control (SM&C) Mission Operations (MO) specifications between both control centers. An additional goal is to provide feedback to the Spacecraft Monitor and Control (SM&C) working group through the Review Item Disposition (RID) process. This Prototype is considered a proof of concept and should increase the knowledge base of the CCSDS SM&C Mission Operations standards. No operational capabilities will be provided. The CCSDS Mission Operations (MO) initiative was previously called Spacecraft Monitor and Control (SM&C). The specifications have been renamed to better reflect the scope and overall objectives. The working group retains the name Spacecraft Monitor and Control working group and is under the Mission Operations and Information Services Area (MOIMS) of CCSDS. This document will refer to the specifications as SM&C Mission Operations, Mission Operations or just MO.

NASA Supportability Engineering Implementation Utilizing DoD Practices and Processes

NASA Technical Reports Server (NTRS)

Smith, David A.; Smith, John V.

2010-01-01

The Ares I design and development program made the determination early in the System Design Review Phase to utilize DoD ILS and LSA approach for supportability engineering as an integral part of the system engineering process. This paper is to provide a review of the overall approach to design Ares-I with an emphasis on a more affordable, supportable, and sustainable launch vehicle. Discussions will include the requirements development, design influence, support concept alternatives, ILS and LSA planning, Logistics support analyses/trades performed, LSA tailoring for NASA Ares Program, support system infrastructure identification, ILS Design Review documentation, Working Group coordination, and overall ILS implementation. At the outset, the Ares I Project initiated the development of the Integrated Logistics Support Plan (ILSP) and a Logistics Support Analysis process to provide a path forward for the management of the Ares-I ILS program and supportability analysis activities. The ILSP provide the initial planning and coordination between the Ares-I Project Elements and Ground Operation Project. The LSA process provided a system engineering approach in the development of the Ares-I supportability requirements; influence the design for supportability and development of alternative support concepts that satisfies the program operability requirements. The LSA planning and analysis results are documented in the Logistics Support Analysis Report. This document was required during the Ares-I System Design Review (SDR) and Preliminary Design Review (PDR) review cycles. To help coordinate the LSA process across the Ares-I project and between programs, the LSA Report is updated and released quarterly. A System Requirement Analysis was performed to determine the supportability requirements and technical performance measurements (TPMs). Two working groups were established to provide support in the management and implement the Ares-I ILS program, the Integrated Logistics Support Working Group (ILSWG) and the Logistics Support Analysis Record Working Group (LSARWG). The Ares I ILSWG is established to assess the requirements and conduct, evaluate analyses and trade studies associated with acquisition logistic and supportability processes and to resolve Ares I integrated logistics and supportability issues. It established a strategic collaborative alliance for coordination of Logistics Support Analysis activates in support of the integrated Ares I vehicle design and development of logistics support infrastructure. A Joint Ares I - Orion LSAR Working Group was established to: 1) Guide the development of Ares-I and Orion LSAR data and serve as a model for future Constellation programs, 2) Develop rules and assumptions that will apply across the Constellation program with regards to the program's LSAR development, and 3) Maintain the Constellation LSAR Style Guide.

Developing Community-Based Learning Centers for Older Adults. A Technical Assistance Manual.

ERIC Educational Resources Information Center

Sprouse, Betsy M.; Brown, Karen

Designed for community groups and organizations, groups of older adults, senior clubs, and agencies, this manual documents the process of developing community education programs for older adults. The first section introduces the concept of a community learning center, while the second section considers whether a learning center should be…

Theories of Mind in Transition: A Microgenetic Study of the Development of False Belief Understanding

ERIC Educational Resources Information Center

Amsterlaw, Jennifer; Wellman, Henry M.

2006-01-01

Microgenetic methods were used to document young children's (N = 36; M age = 3;5) acquisition of false belief (FB) understanding and investigate developmental mechanisms. A control group received no experience with FB; 2 other groups received microgenetic sessions designed to promote FB understanding. Over consecutive weeks, microgenetic groups…

Group Therapy for Improving Self-Esteem and Social Functioning of College Students with ADHD

ERIC Educational Resources Information Center

Shaikh, Ayesha

2018-01-01

The present study examined the effectiveness of interpersonal group therapy designed to improve self-esteem and social functioning in college students with Attention-Deficit/Hyperactivity Disorder (ADHD). Participants with documented ADHD diagnoses completed self-report measures of self-esteem and social functioning at the initiation of the study,…

Cigarette company trade secrets are not secret: an analysis of reverse engineering reports in internal tobacco industry documents released as a result of litigation.

PubMed

Velicer, Clayton; Lempert, Lauren K; Glantz, Stanton

2015-09-01

Use previously secret tobacco industry documents to assess tobacco companies' routine claims of trade secret protection for information on cigarette ingredients, additives and construction made to regulatory agencies, as well as the companies' refusal to publicly disclose this information. We analysed previously secret tobacco industry documents available at (http://legacy.library.ucsf.edu) to identify 100 examples of seven major tobacco companies' reverse engineering of their competitors' brands between 1937 and 2001. These reverse engineering reports contain detailed data for 142 different measurements for at least two companies, including physical parameters of the cigarettes, tobacco types, humectants, additives, flavourings, and smoke constituents of competitors' cigarettes. These 100 documents were distributed to 564 employees, including top managers in domestic and foreign offices across multiple departments, including executive leadership, research and design, product development, marketing and legal. These documents reported new competitors' products, measured ingredient changes over time, and informed companies' decisions regarding ingredients in their own products. Because cigarette companies routinely analyse their competitors' cigarettes in great detail, this information is neither secret nor commercially valuable and, thus, does not meet the legal definition of a 'trade secret.' This information is only being kept 'secret' from the people consuming cigarettes and the scientific community. Public agencies should release this detailed information because it would provide valuable information about how ingredients affect addictiveness and toxicity, and would help the public health community and consumers better understand the impact of cigarette design on human health. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://group.bmj.com/group/rights-licensing/permissions.

OARSI Clinical Trials Recommendations: Design, conduct, and reporting of clinical trials for knee osteoarthritis.

PubMed

McAlindon, T E; Driban, J B; Henrotin, Y; Hunter, D J; Jiang, G-L; Skou, S T; Wang, S; Schnitzer, T

2015-05-01

The goal of this document is to update the original OARSI recommendations specifically for the design, conduct, and reporting of clinical trials that target symptom or structure modification among individuals with knee osteoarthritis (OA). To develop recommendations for the design, conduct, and reporting of clinical trials for knee OA we initially drafted recommendations through an iterative process. Members of the working group included representatives from industry and academia. After the working group members reviewed a final draft, they scored the appropriateness for recommendations. After the members voted we calculated the median score among the nine members of the working group who completed the score. The document includes 25 recommendations regarding randomization, blocking and stratification, blinding, enhancing accuracy of patient-reported outcomes (PRO), selecting a study population and index knee, describing interventions, patient-reported and physical performance measures, structural outcome measures, biochemical biomarkers, and reporting recommendations. In summary, the working group identified 25 recommendations that represent the current best practices regarding clinical trials that target symptom or structure modification among individuals with knee OA. These updated recommendations incorporate novel technologies (e.g., magnetic resonance imaging (MRI)) and strategies to address the heterogeneity of knee OA. Copyright © 2015 Osteoarthritis Research Society International. Published by Elsevier Ltd. All rights reserved.

Wind Systems for Pumping Water: A Training Manual. No. T-25.

ERIC Educational Resources Information Center

Eschenbach, Willis

This document was prepared as a training manual for people interested in developing appropriate technological approaches to using wind power to pump water. The training program is divided into two basic formats, one in which a session focuses on the design process and participants are expected to do some design work in groups, and another which…

Thoughts & Views on the Gulf War. Facilitators Notes and Workbook.

ERIC Educational Resources Information Center

Hollings, Rick; Berghoff, Beth K.

This document presents a workbook and facilitator's notes designed for use with small groups or with individual students in secondary schools to help them cope with troubling events related to the Gulf War. The material contained in the workbook is designed to help students deal with each of seven stages that the mastery model sees individuals…

The cigarette pack as image: new evidence from tobacco industry documents.

PubMed

Wakefield, M; Morley, C; Horan, J K; Cummings, K M

2002-03-01

To gain an understanding of the role of pack design in tobacco marketing. A search of tobacco company document sites using a list of specified search terms was undertaken during November 2000 to July 2001. Documents show that, especially in the context of tighter restrictions on conventional avenues for tobacco marketing, tobacco companies view cigarette packaging as an integral component of marketing strategy and a vehicle for (a) creating significant in-store presence at the point of purchase, and (b) communicating brand image. Market testing results indicate that such imagery is so strong as to influence smoker's taste ratings of the same cigarettes when packaged differently. Documents also reveal the careful balancing act that companies have employed in using pack design and colour to communicate the impression of lower tar or milder cigarettes, while preserving perceived taste and "satisfaction". Systematic and extensive research is carried out by tobacco companies to ensure that cigarette packaging appeals to selected target groups, including young adults and women. Cigarette pack design is an important communication device for cigarette brands and acts as an advertising medium. Many smokers are misled by pack design into thinking that cigarettes may be "safer". There is a need to consider regulation of cigarette packaging.

Chemistry Lectures and Laboratories. A Model to Improve Preservice Elementary Science Teacher Development. Volume III.

ERIC Educational Resources Information Center

Crosby, Glenn; And Others

A group of scientists and science educators of Washington State University has developed and pilot tested an integrated physical science program designed for preservice elementary school teachers. This document includes the syllabus and class materials for the Chemistry block of the physical science courses developed by the group. Included are…

Qualitative Findings from an Experientially Designed Exercise Immunology Course: Holistic Wellness Benefits, Self-Efficacy Gains, and Integration of Prior Course Learning

ERIC Educational Resources Information Center

Curry, Jennifer; Fazio-Griffith, Laura; Carson, Russell; Stewart, Laura

2010-01-01

Experiential education is a well documented approach to engaging student learners. This manuscript presents findings from a qualitative inquiry, specifically focus group discussions, investigating the perceptions of 28 student participants in a learning opportunity provided to a kinesiology class involving structured group exercise (marathon…

Geology Lectures and Laboratories. A Model to Improve Preservice Elementary Science Teacher Development. Volume IV.

ERIC Educational Resources Information Center

Webster, Gary

A group of scientists and science educators at Washington State University has developed and pilot tested an integrated physical science program designed for preservice elementary school teachers. This document includes the syllabus and class materials for the Geology block of the physical science courses developed by the group. Included are…

Astronomy Lectures and Laboratories. A Model to Improve Preservice Elementary Science Teacher Development. Volume I.

ERIC Educational Resources Information Center

Lutz, Julie H.; Orlich, Donald C.

A group of scientists and science educators at Washington State University has developed and pilot tested an integrated physical science program designed for preservice elementary school teachers. This document includes the syllabus and class materials for the Astronomy block of the physical science courses developed by the group. Included are…

Identifying DNA Methylation Features that Underlie Prostate Cancer Disparities

DTIC Science & Technology

2017-10-01

Army position, policy or decision unless so designated by other documentation. REPORT DOCUMENTATION PAGE Form Approved OMB No. 0704- 0188 Public...failing to comply with a collection of information if it does not display a currently valid OMB control number. PLEASE DO NOT RETURN YOUR FORM TO THE...men are more likely to die from prostate cancer than EA men. We hypothesize that differences in DNA methylation patterns across ethnic groups may

Phase II Clinical Trial of Intraoral Grafting of Human Tissue Engineered Oral Mucosa

DTIC Science & Technology

2017-10-01

experimental arm subject in the small defect study. A protocol amendment in early 2017revised the study inclusionary criteria to include all non ...construed as an official Department of the Army position, policy or decision unless so designated by other documentation. REPORT DOCUMENTATION PAGE...group phase II study to assess the safety and efficacy for use of human EVPOME for soft tissue intraoral grafting procedures compared to the “gold

Enhancing Hormonal Therapy for Breast Cancer by Combination with a Well-Known Approved Pharmaceutical with Little Toxicity

DTIC Science & Technology

2008-07-01

node- positive , and estrogen receptor- positive breast cancer patients : a Southwest Oncology Group study. J Clin Oncol 12(10):2078–2085 7. Woods KE...official Department of the Army position , policy or decision unless so designated by other documentation. REPORT DOCUMENTATION PAGE Form...ER) positive metastatic breast cancer are limited by the phenomenon of hormonal resistance. We have found that valproic acid (VPA), a pharmaceutical

Technology for large space systems: A bibliography with indexes (supplement 08)

NASA Technical Reports Server (NTRS)

1983-01-01

This bibliography lists 414 reports, articles and other documents introduced into the NASA scientific and technical information system. It provides helpful information to the researcher, manager, and designer in technology development and mission design in the area of Large Space System Technology. Subject matter is grouped according to systems, interactive analysis and design, structural and thermal analysis and design, structural concepts and control systems, electronics, advanced materials, assembly concepts, propulsion, and solar power satellite systems.

Technology for large space systems: A bibliography with indexes (supplement 10)

NASA Technical Reports Server (NTRS)

1984-01-01

The bibliography lists 408 reports, articles and other documents introduced into the NASA scientific and technical information system to provide helpful information to the researcher, manager, and designer in technology development and mission design in the area of large space system technology. Subject matter is grouped according to systems, interactive analysis and design, structural and thermal analysis and design, structural concepts and control systems, electronics, advanced materials, assembly concepts, propulsion, and solar power satellite systems.

Abstracts of SIG Sessions.

ERIC Educational Resources Information Center

Proceedings of the ASIS Annual Meeting, 1993

1993-01-01

Presents abstracts of 34 special interest group (SIG) sessions. Highlights include humanities scholars and electronic texts; information retrieval and indexing systems design; automated indexing; domain analysis; query expansion in document retrieval systems; thesauri; business intelligence; Americans with Disabilities Act; management;…

The ACEE program and basic composites research at Langley Research Center (1975 to 1986): Summary and bibliography

NASA Technical Reports Server (NTRS)

Dow, Marvin B.

1987-01-01

Composites research conducted at the Langley Research Center during the period from 1975 to 1986 is described, and an annotated bibliography of over 600 documents (with their abstracts) is presented. The research includes Langley basic technology and the composite primary structures element of the NASA Aircraft Energy Efficiency (ACEE) Program. The basic technology documents cited in the bibliography are grouped according to the research activity such as design and analysis, fatigue and fracture, and damage tolerance. The ACEE documents cover development of composite structures for transport aircraft.

Distributed Problem Solving: Adaptive Networks with a Computer Intermediary Resource. Part 1. Group Problem-Solving Performance in a Simulated Military Situation Assessment Task under Varying Environmental Conditions. Part 2. Group Acquisition of Dynamic Control Skills in a Fluid Level Adjustment Problem

DTIC Science & Technology

1991-06-01

Army position, policy , or decision, unless so designated by other authorized documents. SECLRITY ~ JNU Hs~i REPORT DOCUMENTATION PAGE fom N o- Ia...ol CLo ruo 0 I 0 0) .0 0K0 a Eo Co E o c: Cuu >.vo CD E ~ v) CnCD CCo 0Lt Co jo 0) 0 0 0 0 C)(w r- wCul S6UiueuwoejP~P~IOUIIE 8OULUJIJ~dPUBPEONMLi

Participatory design of ehealth solutions for women from vulnerable populations with perinatal depression.

PubMed

Gordon, Mara; Henderson, Rebecca; Holmes, John H; Wolters, Maria K; Bennett, Ian M

2016-01-01

Cultural and health service obstacles affect the quality of pregnancy care that women from vulnerable populations receive. Using a participatory design approach, the Stress in Pregnancy: Improving Results with Interactive Technology group developed specifications for a suite of eHealth applications to improve the quality of perinatal mental health care. We established a longitudinal participatory design group consisting of low-income women with a history of antenatal depression, their prenatal providers, mental health specialists, an app developer, and researchers. The group met 20 times over 24 months. Applications were designed using rapid prototyping. Meetings were documented using field notes. The group achieved high levels of continuity and engagement. Three apps were developed by the group: an app to support high-risk women after discharge from hospital, a screening tool for depression, and a patient decision aid for supporting treatment choice. Longitudinal participatory design groups are a promising, highly feasible approach to developing technology for underserved populations. © The Author 2015. Published by Oxford University Press on behalf of the American Medical Informatics Association. All rights reserved. For Permissions, please email: journals.permissions@oup.com.

The cigarette pack as image: new evidence from tobacco industry documents

PubMed Central

Wakefield, M; Morley, C; Horan, J; Cummings, K

2002-01-01

Methods: A search of tobacco company document sites using a list of specified search terms was undertaken during November 2000 to July 2001. Results: Documents show that, especially in the context of tighter restrictions on conventional avenues for tobacco marketing, tobacco companies view cigarette packaging as an integral component of marketing strategy and a vehicle for (a) creating significant in-store presence at the point of purchase, and (b) communicating brand image. Market testing results indicate that such imagery is so strong as to influence smoker's taste ratings of the same cigarettes when packaged differently. Documents also reveal the careful balancing act that companies have employed in using pack design and colour to communicate the impression of lower tar or milder cigarettes, while preserving perceived taste and "satisfaction". Systematic and extensive research is carried out by tobacco companies to ensure that cigarette packaging appeals to selected target groups, including young adults and women. Conclusions: Cigarette pack design is an important communication device for cigarette brands and acts as an advertising medium. Many smokers are misled by pack design into thinking that cigarettes may be "safer". There is a need to consider regulation of cigarette packaging. PMID:11893817

Kwanzaa.

ERIC Educational Resources Information Center

Baradar, Miriam; And Others

This publication, which provides information about the African-American celebration known as Kwanzaa, was designed to support the Portland (Oregon) Public School District's goal of increasing students' understanding and appreciation of the history, culture, and contributions of different geocultural groups. The document is comprised of the…

Shifting Engagements in Figured Worlds: Middle School Mathematics Students' Participation in an Architectural Design Project

ERIC Educational Resources Information Center

Jurow, A. Susan

2005-01-01

Project-based curricula have the potential to engage students' interests. But how do students become interested in the goals of a project? This article documents how a group of 8th-grade students participated in an architectural design project called the Antarctica Project. The project is based on the imaginary premise that students need to design…

Developments in Art Education: Study Conference. Coombe Lodge Report.

ERIC Educational Resources Information Center

Developments in Art Education, 1974

1974-01-01

The nine papers presented in the document are part of a conference held at Coombe Lodge in Bristol, England, which focused on an analysis of the objectives of vocational art and design education and a re-appraisal of the curriculum. The papers include the following: (1) The Report of the Working Group on Vocational Courses, (2) Design Education--A…

Collective Designing and Sharing of Open Educational Resources: A Study of the French CARTOUN Platform

ERIC Educational Resources Information Center

Quere, Nolwenn

2017-01-01

Designing and sharing Open Educational Resources (OERs) requires teachers to develop new competences, in particular with digital resources. In this paper, the case of a language resource production group is introduced. Due to the centrality of the OERs in their collective activity, I show that the documents they produce are essential to the…

Canadian Army Trophy Analysis

DTIC Science & Technology

1990-10-01

REPORT DOCUMENTATION PAGE OMBNo. 0704-0188 la. REPORT SECURITY CLASS-- CAT ;ON lb RESTRICTIVE MARKINGS Unclassified 2a. SECURITY CLASSiFICATION AUTHORITr 3...if necessary and identify by block number) FIELD GROUP SUB-GROUP CAT , Canadajn Army Trophy, International, Competition, --Gunnery, Tank--T C...accuracy, firing speed, and detection on score during the CAT competition. This study uses a custom stochastic computer model designed to replicate the

Bridging the Research-to-Practice Gap in Education: A Software-Mediated Approach for Improving Classroom Instruction

ERIC Educational Resources Information Center

Weston, Mark E.; Bain, Alan

2015-01-01

This study reports findings from a matched-comparison, repeated-measure for intact groups design of the mediating effect of a suite of software on the quality of classroom instruction provided to students by teachers. The quality of instruction provided by teachers in the treatment and control groups was documented via observations that were…

Experienced Based Career Education. Hamilton High School, Memphis, Tennessee. Final Evaluation Report, September 1976, to September 12, 1979.

ERIC Educational Resources Information Center

Miller, Melvin D.; Wilkins, Sandra

A third-party evaluation was designed to document the processes undertaken to implement a Memphis, Tennessee, experience-based career education (EBCE) program. It also intended to assess project effects on student outcomes. Evaluation included pre- and post-testing of a control group and experimental group of tenth grade students enrolled in the…

A Descriptive Analysis of the Cary Leadership Fellows Program: An Experiment in Training for Educational Leadership.

ERIC Educational Resources Information Center

Rosen, Jacqueline; Palmer, Mary B.

The program treated in this document assumes that most present educational leaders are perhaps not as effectively trained as possible. Funded by the Mary Flager Cary Trust, the 5-year project is designed to train a selected group of experienced teachers of children--especially minority group teachers from inner-city schools--to become educational…

Development of electronic medical record charting for hospital-based transfusion and apheresis medicine services: Early adoption perspectives

PubMed Central

Levy, Rebecca; Pantanowitz, Liron; Cloutier, Darlene; Provencher, Jean; McGirr, Joan; Stebbins, Jennifer; Cronin, Suzanne; Wherry, Josh; Fenton, Joseph; Donelan, Eileen; Johari, Vandita; Andrzejewski, Chester

2010-01-01

Background: Electronic medical records (EMRs) provide universal access to health care information across multidisciplinary lines. In pathology departments, transfusion and apheresis medicine services (TAMS) involved in direct patient care activities produce data and documentation that typically do not enter the EMR. Taking advantage of our institution's initiative for implementation of a paperless medical record, our TAMS division set out to develop an electronic charting (e-charting) strategy within the EMR. Methods: A focus group of our hospital's transfusion committee consisting of transfusion medicine specialists, pathologists, residents, nurses, hemapheresis specialists, and information technologists was constituted and charged with the project. The group met periodically to implement e-charting TAMS workflow and produced electronic documents within the EMR (Cerner Millenium) for various service line functions. Results: The interdisciplinary working group developed and implemented electronic versions of various paper-based clinical documentation used by these services. All electronic notes collectively gather and reside within a unique Transfusion Medicine Folder tab in the EMR, available to staff with access to patient charts. E-charting eliminated illegible handwritten notes, resulted in more consistent clinical documentation among staff, and provided greater realered. However, minor updates and corrections to documents as well as select work re-designs were required for optimal use of e-charting-time review/access of hemotherapy practices. No major impediments to workflow or inefficiencies have been encount by these services. Conclusion: Documentation of pathology subspecialty activities such as TAMS can be successfully incorporated into the EMR. E-charting by staff enhances communication and helps promote standardized documentation of patient care within and across service lines. Well-constructed electronic documents in the EMR may also enhance data mining, quality improvement, and biovigilance monitoring activities. PMID:20805955

Challenges And Concepts for Design of An Interaction Region With Push-Pull Arrangement of Detectors - An Interface Document

DOE Office of Scientific and Technical Information (OSTI.GOV)

Parker, B.; /Brookhaven; Herve, Alain

2011-10-14

Two experimental detectors working in a push-pull mode has been considered for the Interaction Region of the International Linear Collider. The push-pull mode of operation sets specific requirements and challenges for many systems of detector and machine, in particular for the IR magnets, for the cryogenics and alignment system, for beamline shielding, for detector design and overall integration, and so on. These challenges and the identified conceptual solutions discussed in the paper intend to form a draft of the Interface Document which will be developed further in the nearest future. The authors of the present paper include the organizers andmore » conveners of working groups of the workshop on engineering design of interaction region IRENG07, the leaders of the IR Integration within Global Design Effort Beam Delivery System, and the representatives from each detector concept submitting the Letters Of Intent.« less

Technology Integration (Task 20) Aeroservoelastic Modeling and Design Studies. Part A; Evaluation of Aeroservoelastic Effects on Flutter and Dynamic Gust Response

NASA Technical Reports Server (NTRS)

Nagaraja, K. S.; Kraft, R. H.

1999-01-01

The HSCT Flight Controls Group has developed longitudinal control laws, utilizing PTC aeroelastic flexible models to minimize aeroservoelastic interaction effects, for a number of flight conditions. The control law design process resulted in a higher order controller and utilized a large number of sensors distributed along the body for minimizing the flexibility effects. Processes were developed to implement these higher order control laws for performing the dynamic gust loads and flutter analyses. The processes and its validation were documented in Reference 2, for selected flight condition. The analytical results for additional flight conditions are presented in this document for further validation.

Language and Program for Documenting Software Design

NASA Technical Reports Server (NTRS)

Kleine, H.; Zepko, T. M.

1986-01-01

Software Design and Documentation Language (SDDL) provides effective communication medium to support design and documentation of complex software applications. SDDL supports communication among all members of software design team and provides for production of informative documentation on design effort. Use of SDDL-generated document to analyze design makes it possible to eliminate many errors not detected until coding and testing attempted. SDDL processor program translates designer's creative thinking into effective document for communication. Processor performs as many automatic functions as possible, freeing designer's energy for creative effort. SDDL processor program written in PASCAL.

Technology for large space systems: A bibliography with indexes (supplement 09)

NASA Technical Reports Server (NTRS)

1983-01-01

This bibliography lists 414 reports, articles and other documents introduced into the NASA scientific and technical information system between January 1, 1983 and June 30, 1983. Information on technology development and mission design in the area of Large Space System Technology is provided. Subject matter is grouped according to systems, interactive analysis and design, structural and thermal analysis and design, structural concepts and control systems, electronics. advanced materials, assembly concepts, propulsion, and solar power satellite systems.

Implementation and Qualifications Lessons Learned for Space Flight Photonic Components

NASA Technical Reports Server (NTRS)

Ott, Melanie N.

2010-01-01

This slide presentation reviews the process for implementation and qualification of space flight photonic components. It discusses the causes for most common anomalies for the space flight components, design compatibility, a specific failure analysis of optical fiber that occurred in a cable in 1999-2000, and another ExPCA connector anomaly involving pins that broke off. It reviews issues around material selection, quality processes and documentation, and current projects that the Photonics group is involved in. The importance of good documentation is stressed.

11/12 F.L.A.S.H.: A Curriculum Supplement in Family Life and Sexual Health for Grades 11 & 12.

ERIC Educational Resources Information Center

Reis, Elizabeth

This curriculum supplement is designed for high school juniors and seniors to augment the edition designed for freshmen and sophomores. The document is divided into 18 units. Unit 1 is on critical thinking, and serves to help the student distinguish among values, feelings, fallacies, and facts. The next five units are grouped together under child…

Effects of Design-Based Science Instruction on Science Problem-Solving Competency among Different Groups of High-School Traditional Chemistry Students

ERIC Educational Resources Information Center

Lartson, Cobina Adu

2013-01-01

Recent trends indicate a significant decline in the number of students graduating from Science, Technology, Engineering and Math (STEM) programs in the US. The under-representation of students of color, females and low income students in STEM programs has also been documented. Design Based Science (DBS) instruction has been suggested to improve…

The Comparison of Two Forms of a Classroom Simulation Test Designed To Enhance Future Teachers Self-Definition and Teaching Style. Final Report.

ERIC Educational Resources Information Center

Garrison, Jesse H.; Kersh, Bert Y.

The experiment reported in this document is based on the work of Garrison and others in developing a testing and interviewing procedure designed to enable increased self-definition on the part of prospective teachers and earlier development of appropriate and effective teaching styles. Three groups of elementary education majors were involved in…

Fact Sheet: Documenting Ground-Water Models Selection at Site Contaminated with Radioactive Substance

EPA Pesticide Factsheets

This fact sheet summarizes the report by a joint Interagency Environmental Pathway Modeling Working Group. It was designed to be used by technical staff responsible for identifying and implementing flow and transport models to support cleanup decisions.

Ideas That Work.

ERIC Educational Resources Information Center

Appalachian Regional Commission, Washington, DC.

This document profiles successful projects designed to develop Appalachia's labor force, economy, and educational opportunities. The 86 project profiles provided are grouped by the following five goals that were established for the region by the Appalachian Regional Commission: (1) Appalachian residents will have the skills and knowledge necessary…

Rural Renaissance. Revitalizing Small High Schools.

ERIC Educational Resources Information Center

Ford, Edmund A.

Written in 1961, this document presents the rationales and applications of what were and still are, in most instances, considered innovative practices. Subjects discussed are building designs, teaching machines, educational television, flexible scheduling, multiple classes and small-group techniques, teacher assistants, shared services, and…

Development and implementation of clinical trial protocol templates at the National Institute of Allergy and Infectious Diseases.

PubMed

Bridge, Heather; Smolskis, Mary; Bianchine, Peter; Dixon, Dennis O; Kelly, Grace; Herpin, Betsey; Tavel, Jorge

2009-08-01

A clinical research protocol document must reflect both sound scientific rationale as well as local, national and, when applicable, international regulatory and human subject protections requirements. These requirements originate from a variety of sources, undergo frequent revision and are subject to interpretation. Tools to assist clinical investigators in the production of clinical protocols could facilitate navigating these requirements and ultimately increase the efficiency of clinical research. The National Institute of Allergy and Infectious Diseases (NIAID) developed templates for investigators to serve as the foundation for protocol development. These protocol templates are designed as tools to support investigators in developing clinical protocols. NIAID established a series of working groups to determine how to improve its capacity to conduct clinical research more efficiently and effectively. The Protocol Template Working Group was convened to determine what protocol templates currently existed within NIAID and whether standard NIAID protocol templates should be produced. After review and assessment of existing protocol documents and requirements, the group reached consensus about required and optional content, determined the format and identified methods for distribution as well as education of investigators in the use of these templates. The templates were approved by the NIAID Executive Committee in 2006 and posted as part of the NIAID Clinical Research Toolkit [1] website for broad access. These documents require scheduled revisions to stay current with regulatory and policy changes. The structure of any clinical protocol template, whether comprehensive or specific to a particular study phase, setting or design, affects how it is used by investigators. Each structure presents its own set of advantages and disadvantages. While useful, protocol templates are not stand-alone tools for creating an optimal protocol document, but must be complemented by institutional resources and support. Education and guidance of investigators in the appropriate use of templates is necessary to ensure a complete yet concise protocol document. Due to changing regulatory requirements, clinical protocol templates cannot become static, but require frequent revisions.

Commission 5: Documentation and Astronomical Data

NASA Astrophysics Data System (ADS)

Norris, Raymond P.; Ohishi, Masatoshi; Genova, Françoise; Grothkopf, Uta; Malkov, Oleg Yu.; Pence, William D.; Schmitz, Marion; Hanisch, Robert J.; Zhou, Xu

IAU Commission 5 deals with data management issues, and its working groups and task groups deal specifically with information handling, with data centres and networks, with technical aspects of collection, archiving, storage and dissemination of data, with designations and classification of astronomical objects, with library services, editorial policies, computer communications, ad hoc methodologies, and with various standards, reference frames, etc., FITS, astronomys Flexible Image Transport System, the major data exchange format, is controlled, maintained and updated by the Working Group FITS.

One size does not fit all: how the tobacco industry has altered cigarette design to target consumer groups with specific psychological and psychosocial needs.

PubMed

Cook, Benjamin Lê; Wayne, Geoffrey Ferris; Keithly, Lois; Connolly, Gregory

2003-11-01

To identify whether the tobacco industry has targeted cigarette product design towards individuals with varying psychological/psychosocial needs. Internal industry documents were identified through searches of an online archival document research tool database using relevancy criteria of consumer segmentation and needs assessment. The industry segmented consumer markets based on psychological needs (stress relief, behavioral arousal, performance enhancement, obesity reduction) and psychosocial needs (social acceptance, personal image). Associations between these segments and smoking behaviors, brand and design preferences were used to create cigarette brands targeting individuals with these needs. Cigarette brands created to address the psychological/psychosocial needs of smokers may increase the likelihood of smoking initiation and addiction. Awareness of targeted product development will improve smoking cessation and prevention efforts.

Targeting of Asian Americans and Pacific Islanders by the tobacco industry: results from the Minnesota Tobacco Document Depository

PubMed Central

Muggli, M; Pollay, R; Lew, R; Joseph, A

2002-01-01

Objective: The study objective was to review internal tobacco industry documents written between 1985 and 1995 regarding the Asian American and Pacific Islander (AAPI) population in the USA. These documents detail opportunities and barriers to promotion of tobacco products, as viewed by the tobacco industry and its market research firms. Data sources/methods: Researchers reviewed tobacco industry documents from the document depository in Minneapolis, Minnesota and the tobacco industry's website, The Tobacco Archive, in a systematic fashion. A combined technique was employed using title keywords, dates, and names to search the 4(b) index. Findings: A review of internal tobacco company documents reveal that during the late 1980s, the industry and its market research firms recognised the importance of the AAPI community as a potential business market. Documents describe the population growth in this community, the high prevalence of smoking in countries of origin, high purchasing power of AAPI immigrants, cultural predisposition to smoking, opportunities afforded by the high proportion of retail businesses under AAPI ownership, barriers to developing the AAPI market, comprehensive campaigns, and political and lobbying efforts. Comprehensive campaigns were designed to integrate promotion efforts in AAPI consumer, retail, and business communities. Conclusions: The documents show that the tobacco industry developed specific promotion strategies to target the AAPI population. Tobacco control initiatives in the AAPI group have been slower to develop than in other targeted ethnic groups, and may benefit by increased awareness of industry methods to promote tobacco use. PMID:12198269

Targeting of Asian Americans and Pacific Islanders by the tobacco industry: results from the Minnesota Tobacco Document Depository.

PubMed

Muggli, M E; Pollay, R W; Lew, R; Joseph, A M

2002-09-01

The study objective was to review internal tobacco industry documents written between 1985 and 1995 regarding the Asian American and Pacific Islander (AAPI) population in the USA. These documents detail opportunities and barriers to promotion of tobacco products, as viewed by the tobacco industry and its market research firms. /methods: Researchers reviewed tobacco industry documents from the document depository in Minneapolis, Minnesota and the tobacco industry's website, The Tobacco Archive, in a systematic fashion. A combined technique was employed using title keywords, dates, and names to search the 4(b) index. A review of internal tobacco company documents reveal that during the late 1980s, the industry and its market research firms recognised the importance of the AAPI community as a potential business market. Documents describe the population growth in this community, the high prevalence of smoking in countries of origin, high purchasing power of AAPI immigrants, cultural predisposition to smoking, opportunities afforded by the high proportion of retail businesses under AAPI ownership, barriers to developing the AAPI market, comprehensive campaigns, and political and lobbying efforts. Comprehensive campaigns were designed to integrate promotion efforts in AAPI consumer, retail, and business communities. The documents show that the tobacco industry developed specific promotion strategies to target the AAPI population. Tobacco control initiatives in the AAPI group have been slower to develop than in other targeted ethnic groups, and may benefit by increased awareness of industry methods to promote tobacco use.

Capturing, using, and managing quality assurance knowledge for shuttle post-MECO flight design

NASA Technical Reports Server (NTRS)

Peters, H. L.; Fussell, L. R.; Goodwin, M. A.; Schultz, Roger D.

1991-01-01

Ascent initialization values used by the Shuttle's onboard computer for nominal and abort mission scenarios are verified by a six degrees of freedom computer simulation. The procedure that the Ascent Post Main Engine Cutoff (Post-MECO) group uses to perform quality assurance (QA) of the simulation is time consuming. Also, the QA data, checklists and associated rationale, though known by the group members, is not sufficiently documented, hindering transfer of knowledge and problem resolution. A new QA procedure which retains the current high level of integrity while reducing the time required to perform QA is needed to support the increasing Shuttle flight rate. Documenting the knowledge is also needed to increase its availability for training and problem resolution. To meet these needs, a knowledge capture process, embedded into the group activities, was initiated to verify the existing QA checks, define new ones, and document all rationale. The resulting checks were automated in a conventional software program to achieve the desired standardization, integrity, and time reduction. A prototype electronic knowledge base was developed with Macintosh's HyperCard to serve as a knowledge capture tool and data storage.

Use of an Adverse Outcome Pathway for Hepatic Steatosis to Build Chemical Groups

EPA Science Inventory

The Adverse Outcome Pathway (AOP) framework systematically documents the mechanisms underlying effects of chemicals starting with the initial interaction of chemicals with the biological system, i.e. the molecular initiating event (MIE). Chemical activity in assays designed to mo...

Incentives for nondiscriminatory wellness programs in group health plans. Final rule.

PubMed

2013-06-03

This document contains final regulations, consistent with the Affordable Care Act, regarding nondiscriminatory wellness programs in group health coverage. Specifically, these final regulations increase the maximum permissible reward under a health-contingent wellness program offered in connection with a group health plan (and any related health insurance coverage) from 20 percent to 30 percent of the cost of coverage. The final regulations further increase the maximum permissible reward to 50 percent for wellness programs designed to prevent or reduce tobacco use. These regulations also include other clarifications regarding the reasonable design of health-contingent wellness programs and the reasonable alternatives they must offer in order to avoid prohibited discrimination.

Recipe for Success: Digital Viewables

NASA Technical Reports Server (NTRS)

LaPha, Steven; Gaydos, Frank

2014-01-01

The Engineering Services Contract (ESC) and Information Management Communication Support contract (IMCS) at Kennedy Space Center (KSC) provide services to NASA in respect to flight and ground systems design and development. These groups provides the necessary tools, aid, and best practice methodologies required for efficient, optimized design and process development. The team is responsible for configuring and implementing systems, software, along with training, documentation, and administering standards. The team supports over 200 engineers and design specialists with the use of Windchill, Creo Parametric, NX, AutoCAD, and a variety of other design and analysis tools.

Technology for large space systems: A bibliography with indexes (supplement 12)

NASA Technical Reports Server (NTRS)

1985-01-01

A bibliography listing 516 reports, articles and other documents introduced into the NASA scientific and technical information system between July 1, 1984 and December 31, 1984 is presented. Its purpose is to provide helpful information to the researcher, manager, and designer in technology development and mission design in the area of Large Space System Technology. Subject matter is grouped according to system, interactive analysis and design, structural and thermal analysis and design, structural concepts and control systems, electronics, advanced materials, assembly concepts, propulsion, and solar power satellite systems.

Army-NASA aircrew/aircraft integration program. Phase 5: A3I Man-Machine Integration Design and Analysis System (MIDAS) software concept document

NASA Technical Reports Server (NTRS)

Banda, Carolyn; Bushnell, David; Chen, Scott; Chiu, Alex; Neukom, Christian; Nishimura, Sayuri; Prevost, Michael; Shankar, Renuka; Staveland, Lowell; Smith, Greg

1992-01-01

This is the Software Concept Document for the Man-machine Integration Design and Analysis System (MIDAS) being developed as part of Phase V of the Army-NASA Aircrew/Aircraft Integration (A3I) Progam. The approach taken in this program since its inception in 1984 is that of incremental development with clearly defined phases. Phase 1 began in 1984 and subsequent phases have progressed at approximately 10-16 month intervals. Each phase of development consists of planning, setting requirements, preliminary design, detailed design, implementation, testing, demonstration and documentation. Phase 5 began with an off-site planning meeting in November, 1990. It is expected that Phase 5 development will be complete and ready for demonstration to invited visitors from industry, government and academia in May, 1992. This document, produced during the preliminary design period of Phase 5, is intended to record the top level design concept for MIDAS as it is currently conceived. This document has two main objectives: (1) to inform interested readers of the goals of the MIDAS Phase 5 development period, and (2) to serve as the initial version of the MIDAS design document which will be continuously updated as the design evolves. Since this document is written fairly early in the design period, many design issues still remain unresolved. Some of the unresolved issues are mentioned later in this document in the sections on specific components. Readers are cautioned that this is not a final design document and that, as the design of MIDAS matures, some of the design ideas recorded in this document will change. The final design will be documented in a detailed design document published after the demonstrations.

Implementation and Evaluation of Two Educational Strategies to Improve Screening for Eating Disorders in Pediatric Primary Care.

PubMed

Gooding, Holly C; Cheever, Elizabeth; Forman, Sara F; Hatoun, Jonathan; Jooma, Farah; Touloumtzis, Currie; Vernacchio, Louis

2017-05-01

Routine screening for disordered eating or body image concerns is recommended by the American Academy of Pediatrics. We evaluated the ability of two educational interventions to increase screening for eating disorders in pediatric primary care practice, predicting that the "active-learning" group would have an increase in documented screening after intervention. We studied 303 practitioners in a large independent practice association located in the northeastern United States. We used a quasi-experimental design to test the effect of printed educational materials ("print-learning" group, n = 280 participants) compared with in-person shared learning followed by on-line spaced education ("active-learning" group, n = 23 participants) on documented screening of adolescents for eating disorder symptoms during preventive care visits. A subset of 88 participants completed additional surveys regarding knowledge of eating disorders, comfort screening for, diagnosing, and treating eating disorders, and satisfaction with their training regarding eating disorders. During the preintervention period, 4.5% of patients seen by practitioners in both the print-learning and active-learning groups had chart documentation of screening for eating disorder symptoms or body image concerns. This increased to 22% in the active-learning group and 5.7% in the print-learning group in the postintervention period, a statistically significant result. Compared with print-learning participants, active-learning group participants had greater eating disorder knowledge scores, increases in comfort diagnosing eating disorders, and satisfaction with their training in this area. In-person shared learning followed by on-line spaced education is more effective than print educational materials for increasing provider documentation of screening for eating disorders in primary care. Copyright © 2016 Society for Adolescent Health and Medicine. Published by Elsevier Inc. All rights reserved.

Technology for large space systems: A special bibliography with indexes

NASA Technical Reports Server (NTRS)

1979-01-01

This bibliography lists 460 reports, articles, and other documents introduced into the NASA scientific and technical information system between January 1, 1968 and December 31, 1978. Its purpose is to provide helpful information to the researcher, manager, and designer in technology development and mission design in the area of the Large Space Systems Technology (LSST) Program. Subject matter is grouped according to systems, interactive analysis and design, structural concepts, control systems, electronics, advanced materials, assembly concepts, propulsion, and flight experiments.

Technology for large space systems: A special bibliography with indexes (supplement 01)

NASA Technical Reports Server (NTRS)

1979-01-01

This bibliography lists 180 reports, articles, and other documents introduced into the NASA scientific and technical information system between January 1, 1979 and June 30, 1979. Its purpose is to provide helpful information to the researcher, manager, and designer in technology development and mission design in the area of the Large Space Systems Technology (LSST) Program. Subject matter is grouped according to systems, interactive analysis and design, structural concepts, control systems, electronics, advanced materials, assembly concepts, propulsion, and flight experiments.

Improving the Selection, Classification, and Utilization of Army Enlisted Personnel: Annual Report, 1987 Fiscal Year

DTIC Science & Technology

1989-10-01

unles so designated by other authrized documena. ’V FOREWORD This document is a descrition of the research effort of the fifth year (Fiscal Year 1987...criterion measures. This part of the effort included the design of job performance measures for the noncommissioned officers in their second tour who were...phase. In Chapter 2 the Project A analysis group reports on their efforts to use the Concurrent Validation sample results to design optimal ASVAB

Technology for large space systems: A special bibliography with indexes (supplement 04)

NASA Technical Reports Server (NTRS)

1981-01-01

This bibliography lists 259 reports, articles, and other documents introduced into the NASA scientific and technical information system between July 1, 1980 and December 31, 1980. Its purpose is to provide information to the researcher, manager, and designer in technology development and mission design in the area of the Large Space Systems Technology Program. Subject matter is grouped according to systems, interactive analysis and design. Structural concepts, control systems, electronics, advanced materials, assembly concepts, propulsion, solar power satellite systems, and flight experiments.

Alternative Designs for Evaluating Workplace Literacy Programs. Conference Proceedings and Commissioned Papers at the "Design Guidance for Evaluating Workplace Literacy Programs" Work Group Conference (Washington, D.C. April 13, 1993).

ERIC Educational Resources Information Center

Research Triangle Inst., Research Triangle Park, NC.

This document contains the five papers presented at a meeting at which key issues in evaluating workplace literacy programs were discussed. In "Key Components of Workplace Liteacy Projects and Definitions of Project 'Modules,'" Judith A. Alamprese describes the context for evaluating the National Extension Program, components of workplace literacy…

Evaluation of interventions to prevent injuries: an overview

PubMed Central

Dannenberg, A.; Fowler, C.

1998-01-01

Overview of issues involved in evaluating the effectiveness of injury interventions is presented. An intervention should be evaluated to show it prevents injuries in the target population, to identify unintended consequences, to correct problems that limit effectiveness, to justify current and future resources from funding agencies, and to guide its replication elsewhere. Problems in conducting evaluations include obtaining sufficient resources, coping with rare events, establishing reliability and validity of measurement instruments, separating effects of multiple simultaneous events, and adjusting for the time lag between an intervention and its effects. When feasible, changes in injury rates (documented by medical records) should be used. These are more convincing for demonstrating intervention effectiveness than changes in observed or reported behaviors or in knowledge and attitudes (documented by surveys). Quasiexperimental evaluation designs are often useful, such as measuring injury rates before and after an intervention in a time series design, or intervening in one of two comparable communities in a non-equivalent control group design. Evaluations using true experimental designs, in which individuals or groups are randomized to receive or not receive an intervention, are highly desirable but are often difficult due to logistical or ethical considerations. An evaluation component should be integral to the introduction of any new injury intervention. PMID:9666371

Methodology for the development of a taxonomy and toolkit to evaluate health-related habits and lifestyle (eVITAL)

PubMed Central

2010-01-01

Background Chronic diseases cause an ever-increasing percentage of morbidity and mortality, but many have modifiable risk factors. Many behaviors that predispose or protect an individual to chronic disease are interrelated, and therefore are best approached using an integrated model of health and the longevity paradigm, using years lived without disability as the endpoint. Findings This study used a 4-phase mixed qualitative design to create a taxonomy and related online toolkit for the evaluation of health-related habits. Core members of a working group conducted a literature review and created a framing document that defined relevant constructs. This document was revised, first by a working group and then by a series of multidisciplinary expert groups. The working group and expert panels also designed a systematic evaluation of health behaviors and risks, which was computerized and evaluated for feasibility. A demonstration study of the toolkit was performed in 11 healthy volunteers. Discussion In this protocol, we used forms of the community intelligence approach, including frame analysis, feasibility, and demonstration, to develop a clinical taxonomy and an online toolkit with standardized procedures for screening and evaluation of multiple domains of health, with a focus on longevity and the goal of integrating the toolkit into routine clinical practice. Trial Registration IMSERSO registry 200700012672 PMID:20334642

Hinterbrand Lodge Outdoor Education Center. Program Information.

ERIC Educational Resources Information Center

Dependents Schools (DOD), Washington, DC. European Area.

Describing Department of Defense Dependents Schools Europe (DODDSEUR) use of Hinterbrand Lodge Outdoor Education Center, this document is directed to sponsors wishing to take groups to Hinterbrand for one or more of the five program options (outdoor education week, teacher weekend, school-designed outdoor education program, administrative faculty…

Pilot-testing an adverse drug event reporting form prior to its implementation in an electronic health record.

PubMed

Chruscicki, Adam; Badke, Katherin; Peddie, David; Small, Serena; Balka, Ellen; Hohl, Corinne M

2016-01-01

Adverse drug events (ADEs), harmful unintended consequences of medication use, are a leading cause of hospital admissions, yet are rarely documented in a structured format between care providers. We describe pilot-testing structured ADE documentation fields prior to integration into an electronic medical record (EMR). We completed a qualitative study at two Canadian hospitals. Using data derived from a systematic review of the literature, we developed screen mock-ups for an ADE reporting platform, iteratively revised in participatory workshops with diverse end-user groups. We designed a paper-based form reflecting the data elements contained in the mock-ups. We distributed them to a convenience sample of clinical pharmacists, and completed ethnographic workplace observations while the forms were used. We reviewed completed forms, collected feedback from pharmacists using semi-structured interviews, and coded the data in NVivo for themes related to the ADE form. We completed 25 h of clinical observations, and 24 ADEs were documented. Pharmacists perceived the form as simple and clear, with sufficient detail to capture ADEs. They identified fields for omission, and others requiring more detail. Pharmacists encountered barriers to documenting ADEs including uncertainty about what constituted a reportable ADE, inability to complete patient follow-up, the need for inter-professional communication to rule out alternative diagnoses, and concern about creating a permanent record. Paper-based pilot-testing allowed planning for important modifications in an ADE documentation form prior to implementation in an EMR. While paper-based piloting is rarely reported prior to EMR implementations, it can inform design and enhance functionality. Piloting with other groups of care providers and in different healthcare settings will likely lead to further revisions prior to broader implementations.

Evolving the NCSA CyberCollaboratory for Distributed Environmental Observatory Networks

NASA Astrophysics Data System (ADS)

Myers, J.; Liu, Y.; Minsker, B.; Futrelle, J.; Downey, S.; Kim, I.; Rantanen, E.

2007-12-01

Since 2004, NCSA's Cybercollaboratory, which is built on top of the open source Liferay portal framework, has been evolving as part of NCSA's efforts to build national cyberinfrastructure to support collaborative research in environmental engineering and hydrological sciences and allow users to efficiently share contents (sensors, data, model, documents, etc.) in a context-sensitive way (e.g., providing different tools/data based on group affiliation and geospatial contexts). During this period, we provided the CyberCollaboratory to users in CLEANER (Collaborative Large-scale Engineering Analysis Network for Environmental Research, now WATer and Environmental Research Systems (WATERS) network) Project Office and several CLEANER /WATERS testbed projects. Preliminary statistics shows that one in four users (among over 400 registered users) provided contents with many other reading/accessing those contents (such as messages, documents, wikis). During the course of this use, and in evaluation by others including representatives from the CUAHSI (Consortium of Universities for the Advancement of Hydrologic Science) community, we have received significant feedback on issues of usability and suitability to various communities involved in environmental observatories. Much of this feedback applies to collaborative portals in general and some reflect a comparison of portals with newer Web 2.0 style social -networking sites. For example, users working in multiple groups found it difficult to get an overview of all of their activities and found differences in group layouts to be confusing. Users also found the standard account creation and group management processes cumbersome compared to inviting people to be friends on social sites and wanted a better sense of presence and social networks within the portal. The fragmentation of group documents between local stores, the portal document repository and email, and issues of "lost updates" was another significant concern. This poster reviews the usability feedback, identifies key issues that hinder traditional portal-based collaboration environments, and presents design changes made to the Cybercollaboratory to address them. Feedback on the effectiveness of the new design from hydrologists and environmental researchers and preliminary results from a formal usability study will also be presented.

A knowledge translation intervention designed using audit and feedback and the Theoretical Domains Framework for physical therapists working in inpatient rehabilitation: A case report.

PubMed

Romney, Wendy; Salbach, Nancy; Parrott, James Scott; Deutsch, Judith E

2018-04-16

Little is known about the process of engaging key stakeholders to select and design a knowledge translation (KT) intervention to increase the use of an outcome measure using audit and feedback. The purpose of this case report was to describe the development of a KT intervention designed with organizational support to increase physical therapists' (PTs) use of a selected outcome measure in an inpatient sub-acute rehabilitation hospital. Eleven PTs who worked at a sub-acute rehabilitation hospital participated. After determining organizational support, a mixed methods barrier assessment including a chart audit, questionnaire, and a focus group with audit and feedback was used to select an outcome measure and design a locally tailored intervention. The intervention was mapped using the Theoretical Domains Framework (TDF). One investigator acted as knowledge broker and co-designed the intervention with clinician and supervisor support. The 4-m walk test was selected through a group discussion facilitated by the knowledge broker. Support from the facility and input from the key stakeholders guided the design of a tailored KT intervention to increase use of gait speed. The intervention design included an interactive educational meeting, with documentation and environmental changes. Input from the clinicians on the educational meeting, documentation changes and placement of tracks, and support from the supervisor were used to design and locally adapt a KT intervention to change assessment practice among PTs in an inpatient sub-acute rehabilitation hospital. Implementation and evaluation of the intervention is underway.

The development of a program analysis environment for Ada

NASA Technical Reports Server (NTRS)

Brown, David B.; Carlisle, Homer W.; Chang, Kai-Hsiung; Cross, James H.; Deason, William H.; Haga, Kevin D.; Huggins, John R.; Keleher, William R. A.; Starke, Benjamin B.; Weyrich, Orville R.

1989-01-01

A unit level, Ada software module testing system, called Query Utility Environment for Software Testing of Ada (QUEST/Ada), is described. The project calls for the design and development of a prototype system. QUEST/Ada design began with a definition of the overall system structure and a description of component dependencies. The project team was divided into three groups to resolve the preliminary designs of the parser/scanner: the test data generator, and the test coverage analyzer. The Phase 1 report is a working document from which the system documentation will evolve. It provides history, a guide to report sections, a literature review, the definition of the system structure and high level interfaces, descriptions of the prototype scope, the three major components, and the plan for the remainder of the project. The appendices include specifications, statistics, two papers derived from the current research, a preliminary users' manual, and the proposal and work plan for Phase 2.

The value of normalization: Group therapy for individuals with brain injury.

PubMed

von Mensenkampff, Barbara; Ward, Marcia; Kelly, Grace; Cadogan, Sam; Fawsit, Feargus; Lowe, Niamh

2015-01-01

This paper reports on a client-driven therapy group designed to help clients actively process changes and equip them with the psychological skills necessary to facilitate rehabilitation. This is an exploratory mixed methods research design based in clinical practice. This study documents results from five therapy groups, each group consisting of 2-hour sessions over an average of 6 weeks with a review session 6 weeks later. Forty-five clients (13 female, 32 male, average age = 40.54, SD = 11.87) with brain injury attended the group with Headway psychological services, Cork. Clients' pre- and post-measures of functioning were gathered to assess the potential therapeutic benefits. Thematic analysis was used to evaluate the qualitative data. Results illustrate a number of benefits to the participants, including normalizing effects, helping with acceptance, finding a new identity and positive mental health changes. Findings are encouraging and help to validate the effectiveness of group therapy as an intervention tool.

Documenting the NICU design dilemma: parent and staff perceptions of open ward versus single family room units

PubMed Central

Domanico, R; Davis, D K; Coleman, F; Davis, B O

2010-01-01

Objective: With neonatal intensive care units (NICUs) evolving from multipatient wards toward family-friendly, single-family room units, the study objective was to compare satisfaction levels of families and health-care staff across these differing NICU facility designs. Study Design: This prospective study documented, by means of institutional review board-approved questionnaire survey protocols, the perceptions of parents and staff from two contrasting NICU environments. Result: Findings showed that demographic subgroups of parents and staff perceived the advantages and disadvantages of the two facility designs differently. Staff perceptions varied with previous experience, acclimation time and employment position, whereas parental perceptions revealed a naiveté bias through surveys of transitional parents with experience in both NICU facilities. Conclusion: Use of transitional parent surveys showed a subject naiveté bias inherent in perceptions of inexperienced parents. Grouping all survey participants demographically provided more informative interpretations of data, and revealed staff perceptions to vary with position, previous training and hospital experience. PMID:20072132

First Aid for Media-Aides.

ERIC Educational Resources Information Center

Cramer, Mary McCart

This document was developed as part of a Research and Innovation Project by a Department of Defense Dependents School (DoDDS) Media Task Group in West Germany. Designed to provide a ready reference for noncertified personnel working in small school media centers, the monthly calendars (August through June) are intended to encourage an active…

Meatcutting Testbook, Part I.

ERIC Educational Resources Information Center

Strazicich, Mirko, Ed.

This document contains objective tests for each lesson in the Meatcutting Workbook, Part I (see note), which is designed for apprenticeship programs in meatcutting in California. Each of the 36 tests contains from 10 to 45 multiple-choice items. The tests are grouped according to the eight units of the workbook: the apprentice meatcutter; applied…

Meatcutting Testbook, Part 2.

ERIC Educational Resources Information Center

California State Dept. of Education, Sacramento. Bureau of Publications.

This document contains objective tests for each topic in the Meatcutting Workbook, Part 2, which is designed for apprenticeship meatcutting programs in California. Each of the 30 tests consists of from 5 to 65 multiple-choice items with most tests containing approximately 10 items. The tests are grouped according to the eight units of the…

Veterans Education: Coming Home to the Community College Classroom

ERIC Educational Resources Information Center

Persky, Karen Rae

2010-01-01

The purpose of this study was to identify the needs of veterans who are community college students and to examine community college programs and services essential to meeting their needs. A qualitative case study design using interviews, observations, field notes, document reviews, a focus group, and a preinterview demographic questionnaire…

Social Skills Training: A Three-Pronged Approach for Developmentally Disabled Adolescents and Young Adults.

ERIC Educational Resources Information Center

Coyne, Phyllis

The document is designed to provide practical information for teachers, parents, group home workers, work activity personnel, and others interested in developing social interaction skills and appropriate social behaviors in developmentally disabled adolescents and young adults. An introductory section discusses social problems of the…

Classroom Activities to Combat Stereotyping in Career Choice.

ERIC Educational Resources Information Center

American Institutes for Research in the Behavioral Sciences, Palo Alto, CA.

Designed to be used by classroom teachers in combatting sex, race, and handicap stereotyping with respect to career choice, this document contains examples of activities which are appropriate for students from Kindergarten to grade twelve. The twelve activities included in the section of sex role stereotyping are grouped into three broad…

Refrigeration and Cryogenics Specialist. J3ABR54530

ERIC Educational Resources Information Center

Air Force Training Command, Sheppard AFB, TX.

This document package contains an Air Force course used to train refrigeration and cryogenics specialists. The course is organized in six blocks designed for group instruction. The blocks cover the following topics: electrical principles; fundamentals of tubing and piping; metering devices, motor controls, domestic and commercial refrigeration;…

Child Care Bulletin, 1996.

ERIC Educational Resources Information Center

McGhee, Marilyn, Ed.

1996-01-01

This document consists of six issues of the Child Care Bulletin, a bimonthly publication of the National Child Care Information Center. The January-February issue focuses on infants and toddlers in child care. Topics discussed include caring for infants with special needs, designing quality group care environments, Early Head Start programs, and…

Reading "The Friendship" and Talking about Race

ERIC Educational Resources Information Center

Smith, Sally A.; Singer, Judith Y.

2006-01-01

This study documents literature discussions between groups of teacher education students in two geographically and demographically different universities. Students from an education methods course at each site discussed "The Friendship" by Mildred Taylor with one another as part of a distance reader response project. The project was designed to…

ADVANCED UTILITY SIMULATION MODEL, MULTI-PERIOD MULTI-STATE MODULE DESIGN DOCUMENTATION (VERSION 1.0)

EPA Science Inventory

The report is one of 11 in a series describing the initial development of the Advanced Utility Simulation Model (AUSM) by the Universities Research Group on Energy (URGE) and its continued development by the Science Applications International Corporation (SAIC) research team. The...

ADVANCED UTILITY SIMULATION MODEL DOCUMENTATION OF SYSTEM DESIGN STATE LEVEL MODEL (VERSION 1.0)

EPA Science Inventory

The report is one of 11 in a series describing the initial development of the Advanced Utility Simulation Model (AUSM) by the Universities Research Group on Energy (URGE) and its continued development by the Science Applications International Corporation (SAIC) research team. The...

Ripple Effect Mapping: A "Radiant" Way to Capture Program Impacts

ERIC Educational Resources Information Center

Kollock, Debra Hansen; Flage, Lynette; Chazdon, Scott; Paine, Nathan; Higgins, Lorie

2012-01-01

Learn more about a promising follow-up, participatory group process designed to document the results of Extension educational efforts within complex, real-life settings. The method, known as Ripple Effect Mapping, uses elements of Appreciative Inquiry, mind mapping, and qualitative data analysis to engage program participants and other community…

Dominie: Teaching and Assessment Strategies. CAL Research Group Technical Report No. 74.

ERIC Educational Resources Information Center

Spensley, Fiona; Elsom-Cook, Mark

This document outlines the strategies that are used for teaching and assessment in Dominie, an intelligent tutoring system designed to enable the user to operate a computer interface independently. Eight interaction modes are described in detail: four teaching strategies (cognitive apprenticeship, successive refinement, discovery learning, and…

De Todo un Poco (A Little of Everything).

ERIC Educational Resources Information Center

Chicago Public Schools, IL.

This document seeks to underline the importance of cultural awareness by providing examples of the folkways, customs, art, traditions, and life styles of different ethnic groups. Included here are teaching techniques designed to motivate understanding of the universality of man and to show how cultural differences enrich everyone's life.…

Environmental Support Specialist. J3ABR56631

ERIC Educational Resources Information Center

Air Force Training Command, Sheppard AFB, TX.

This document package contains an Air Force course used to train environmental support specialists. The course is organized in four blocks of instruction covering 320 hours (or eight weeks), and is designed for group instruction. The four blocks cover the following topics: environmental fundamentals and support equipment, water and wastewater…

Fashion showcases design: perceptions of the showcase in the brazilian popular market

NASA Astrophysics Data System (ADS)

Pinto, S. S. D.; Cunha, J.; Quental, J.; Buhamra, C.

2017-10-01

The present work aims to present the showcase, its relation with the building, with fashion and with the observer. The importance of this exhibition space extends from the aesthetic and communication functions to be part of a wide textile and clothing chain. This role integrates the whole cycle of creation, textiles, clothing and fashion accessories. For this article we used bibliographical references of design and fashion, as well as methodologies of photographic and ethnographic documentation, with application of focus groups. From the focus groups were identified descriptors related to emotional design. Such descriptors point to the emotions arising from memories, tastes and attitudes. These factors can lead to decisions and assist the wider knowledge of the target audience.

Wang OIS glossary package for reformatting documents telecommunicated to the OIS system

DOE Office of Scientific and Technical Information (OSTI.GOV)

Markow, S.R.

1983-12-09

Documents that are composed on a computer and then transmitted by telecommunications into a Wang Office Information System (OIS) word processing system need to be reformatted and cleaned up before they can be used properly as word processing documents suitable for further revisions or additions. This report describes a group of glossary entries created for the Wang OIS which simplifies the job of cleaning up telecommunicated documents. This glossary is a semi-automated process designed to eliminate most of the tedious work needed to be performed in removing extra spaces and returns, adjusting formats, moving material, repagination, using tabs or indents,more » and similar problems. The report briefly discusses the problems, describes the glossary approach to solving them, and gives instructions for actually using the glossary entries.« less

Cigarette filter ventilation is a defective design because of misleading taste, bigger puffs, and blocked vents.

PubMed

Kozlowski, L T; O'Connor, R J

2002-03-01

To review tobacco industry documents on filter ventilation in light of published studies and to explore the role of filter ventilation in the design of cigarettes that deliver higher smoke yields to smokers than would be expected from standard machine smoked tests (Federal Trade Commission (FTC), International Organization for Standardization (ISO)). Searched from November 1999 to November 2000 internet databases of industry documents (www.pmdocs.com, www.rjrtdocs.com, www.lorillarddocs.com, www.bw.aalatg.com, www.cdc.gov/tobacco/industrydocs, www.tobaccodocuments.org, www.tobaccopapers.org, www.hlth.gov.bc.ca/Guildford, www.cctc.ca/ncth/Guildford, www.cctc.ca/ncth/Guildford2) for documents related to filter ventilation. Documents found dated from 1955 through 1994. Those documents judged to contain the most relevant information or data on filter ventilation related to cigarette taste and compensatory smoking, while also trying to avoid redundancy from various documents deriving from the same underlying data. Filter ventilation is a crucial design feature creating three main problems for lower tar cigarettes as measured by official smoking machine testing. Firstly, it misleadingly makes cigarettes taste lighter and milder, and, therefore, they appear less dangerous to smokers. Secondly, it promotes compensation mainly by facilitating the taking of larger puffs. Thirdly, for very heavily ventilated cigarettes (that is, > 65% filter air dilution), behavioural blocking of vents with lips or fingers is an additional contributor to compensatory smoking. These three effects are found in industry research as well as published research. Filter ventilation is a dangerous, defective technology that should be abandoned in less hazardous nicotine delivery systems. Health interested groups should test cigarettes in a way that reflects compensatory smoking. Lower tar (vented filter) cigarettes should be actively countermarketed.

Content-Based Covert Group Detection in Social Networks

DTIC Science & Technology

2017-09-06

these features to learn a model that could be applied to the holdout set. This model was then used to test on the remaining posts . Accuracy: 51.4...Content-based Covert Group Detection in Social Networks The views, opinions and/or findings contained in this report are those of the author(s) and...should not contrued as an official Department of the Army position, policy or decision, unless so designated by other documentation. 9. SPONSORING

An Evaluation of the Generalized Intelligent Framework for Tutoring (GIFT) from an Author’s Perspective

DTIC Science & Technology

2014-12-01

group instruction as effective as one - to- one tutoring. Educational Researcher. 1984;13(6):4–16. Carbonell. AI in CAI: an artificial intelligence...an official Department of the Army position unless so designated by other authorized documents. Citation of manufacturer’s or trade names does...public release; distribution is unlimited. 13. SUPPLEMENTARY NOTES 14. ABSTRACT Current US Army standards for training and education are group

Influence of Burke and Lessing on the Semiotic Theory of Document Design: Ideologies and Good Visual Images of Documents.

ERIC Educational Resources Information Center

Ding, Daniel D.

2000-01-01

Presents historical roots of page design principles, arguing that current theories and practices of document design have their roots in gender-related theories of images. Claims visual design should be evaluated regarding the rhetorical situation in which the design is used. Focuses on visual images of documents in professional communication,…

Research subject privacy protection in otolaryngology.

PubMed

Noone, Michael C; Walters, K Christian; Gillespie, M Boyd

2004-03-01

Health Insurance Portability and Accountability Act regulations, which took effect on April 14, 2003, placed new constraints on the use of protected health information for research purposes. To review practices of research subject privacy protection in otolaryngology in order to determine steps necessary to achieve compliance with Health Insurance Portability and Accountability Act regulations. Literature review. Articles appearing in 2001 in 3 widely circulated otolaryngology journals were classified according to study design. The "Methods" section of each article was reviewed to determine whether the informed consent and institutional review board processes were clearly documented. Descriptive studies involving case reports and case series were more common than observational studies that include a control group (66% vs 11%). Few case series documented the consent process (18%) and institutional review board process (19%). Observational designs demonstrated better documentation of the consent process (P<.001) and the institutional review board exemption and approval process (P<.001). Methods used to protect subject privacy are not commonly documented in case series in otolaryngology. More attention needs to be given to research subject privacy concerns in the otolaryngology literature in order to comply with Health Insurance Portability and Accountability Act regulations.

Development of Innovative Design Processor

DOE Office of Scientific and Technical Information (OSTI.GOV)

Park, Y.S.; Park, C.O.

2004-07-01

The nuclear design analysis requires time-consuming and erroneous model-input preparation, code run, output analysis and quality assurance process. To reduce human effort and improve design quality and productivity, Innovative Design Processor (IDP) is being developed. Two basic principles of IDP are the document-oriented design and the web-based design. The document-oriented design is that, if the designer writes a design document called active document and feeds it to a special program, the final document with complete analysis, table and plots is made automatically. The active documents can be written with ordinary HTML editors or created automatically on the web, which ismore » another framework of IDP. Using the proper mix-up of server side and client side programming under the LAMP (Linux/Apache/MySQL/PHP) environment, the design process on the web is modeled as a design wizard style so that even a novice designer makes the design document easily. This automation using the IDP is now being implemented for all the reload design of Korea Standard Nuclear Power Plant (KSNP) type PWRs. The introduction of this process will allow large reduction in all reload design efforts of KSNP and provide a platform for design and R and D tasks of KNFC. (authors)« less

Technology for Large Space Systems: A Special Bibliography with Indexes (Supplement 2)

NASA Technical Reports Server (NTRS)

1980-01-01

This bibliography lists 258 reports, articles, and other documents introduced into the NASA scientific and technical information system between July 1, 1979 and December 31, 1979. Its purpose is to provide helpful information to the researcher, manager, and designer in technology development and mission design in the area of the Large Space Systems Technology (LSST) Program. Subject matter is grouped according to systems, interactive analysis and design, structural concepts, control systems, electronics, advanced materials, assembly concepts, propulsion, solar power satellite systems, and flight experiments.

Technology for large space systems: A special bibliography with indexes (supplement 05)

NASA Technical Reports Server (NTRS)

1981-01-01

This bibliography lists 298 reports, articles, and other documents introduced into the NASA scientific and technical information system between January 1, 1981 and June 30, 1981. Its purpose is to provide helpful, information to the researcher, manager, and designer in technology development and mission design in the area of the Large Space Systems Technology (LSST) Program. Subject matter is grouped according to systems, interactive analysis and design, structural concepts, control systems, electronics, advanced materials, assembly concepts, propulsion, solar power satellite systems, and flight experiments.

Technology for large space systems: A special bibliography with indexes (supplement 06)

NASA Technical Reports Server (NTRS)

1982-01-01

This bibliography lists 220 reports, articles and other documents introduced into the NASA scientific and technical information system between July 1, 1981 and December 31, 1981. Its purpose is to provide helpful information to the researcher, manager, and designer in technology development and mission design in the area of the Large Space Systems Technology (LSST) Program. Subject matter is grouped according to systems, interactive analysis and design, structural concepts, control systems, electronics, advanced materials, assembly concepts, propulsion, solar power satellite systems, and flight experiments.

Excellence in Physics Education Award Talk: Evolving Evaluation and Evidence

NASA Astrophysics Data System (ADS)

Matsler, Karen

2011-04-01

AAPT/PTRA institutes were part of the first NSF projects encouraged to design rigorous evaluations to determine the characteristic of effective professional development. The evaluation of the AAPT/PTRA program has evolved from documenting the number of teachers attending daily workshops to documenting gains in content understanding and confidence by conducting comparison study groups for over 30 institutes across the nation. Components of the current AAPT/PTRA evaluation model include documentation of teacher gains in content understanding, confidence, use of technology, changes in classroom practice, and student achievement. This talk will reflect on the evaluation components, the inherent challenges, components that were successful, and lessons learned. Results of the data collected on over 1000 teachers since 2003 will be shared.

Advanced Group Support Systems and Facilities

NASA Technical Reports Server (NTRS)

Noor, Ahmed K. (Compiler); Malone, John B. (Compiler)

1999-01-01

The document contains the proceedings of the Workshop on Advanced Group Support Systems and Facilities held at NASA Langley Research Center, Hampton, Virginia, July 19-20, 1999. The workshop was jointly sponsored by the University of Virginia Center for Advanced Computational Technology and NASA. Workshop attendees came from NASA, other government agencies, industry, and universities. The objectives of the workshop were to assess the status of advanced group support systems and to identify the potential of these systems for use in future collaborative distributed design and synthesis environments. The presentations covered the current status and effectiveness of different group support systems.

Sampling design and procedures for fixed surface-water sites in the Georgia-Florida coastal plain study unit, 1993

USGS Publications Warehouse

Hatzell, H.H.; Oaksford, E.T.; Asbury, C.E.

1995-01-01

The implementation of design guidelines for the National Water-Quality Assessment (NAWQA) Program has resulted in the development of new sampling procedures and the modification of existing procedures commonly used in the Water Resources Division of the U.S. Geological Survey. The Georgia-Florida Coastal Plain (GAFL) study unit began the intensive data collection phase of the program in October 1992. This report documents the implementation of the NAWQA guidelines by describing the sampling design and procedures for collecting surface-water samples in the GAFL study unit in 1993. This documentation is provided for agencies that use water-quality data and for future study units that will be entering the intensive phase of data collection. The sampling design is intended to account for large- and small-scale spatial variations, and temporal variations in water quality for the study area. Nine fixed sites were selected in drainage basins of different sizes and different land-use characteristics located in different land-resource provinces. Each of the nine fixed sites was sampled regularly for a combination of six constituent groups composed of physical and chemical constituents: field measurements, major ions and metals, nutrients, organic carbon, pesticides, and suspended sediments. Some sites were also sampled during high-flow conditions and storm events. Discussion of the sampling procedure is divided into three phases: sample collection, sample splitting, and sample processing. A cone splitter was used to split water samples for the analysis of the sampling constituent groups except organic carbon from approximately nine liters of stream water collected at four fixed sites that were sampled intensively. An example of the sample splitting schemes designed to provide the sample volumes required for each sample constituent group is described in detail. Information about onsite sample processing has been organized into a flowchart that describes a pathway for each of the constituent groups.

The effects of the application of SIMPRO on the completeness and time efficiency of nursing documentation in the outpatient instalation at Dompet Dhuafa Hospital Parung

NASA Astrophysics Data System (ADS)

Dwisatyadini, M.; Hariyati, R. T. S.; Afifah, E.

2018-03-01

Nursing documentation is clinical information that has a vital role in nursing services. The nursing process includes assessment, diagnosis, intervention, implementation, and evaluation. The purpose of this study was to determine the effects of the application of SIMPRO on the completeness and the efficiency of nursing documentation in the outpatient installation at Dompet Dhuafa Hospital Parung. This study used quantitative method with pre experimental (pre and posttest without control group) design. The mean of the documentation completeness marks before the application of SIMPRO was 1.87 (SD 0.922), and after SIMPRO was applied increased to 3.61 (0.588). This increase indicated an improvement of the nursing documentation completeness after the implementation of SIMPRO. The mean of time needed by nurses in documenting the nursing care before the application of SIMPRO was 476.13 seconds (SD 78.896). The mean of documenting time decreased more than a half after the application of SIMPRO which was 202.52 seconds (SD 196.723). SIMPRO made a nurse easier to take a decision analysis and decision support system to nursing care plan and documentation.

Commission 5: Documentation and Astronomical Data

NASA Astrophysics Data System (ADS)

Ohishi, Masatoshi; Hanisch, Robert J.; Norris, Ray P.; Andernach, Heinz; Bishop, Marsha; Griffin, Elizabeth; Kembhavi, Ajit; Murphy, Tara; Pasian, Fabio

2012-04-01

IAU Commission 5 (http://www.nao.ac.jp/IAU/Com5/) deals with data management issues, and its working groups and task group deal specifically with information handling, with data centers and networks, with technical aspects of collection, archiving, storage and dissemination of data, with designations and classification of astronomical objects, with library services, editorial policies, computer communications, ad hoc methodologies, and with various standards, reference frames, etc. FITS (Flexible Image Transport System), the major data exchange format in astronomy, has been standardized, maintained and updated by the FITS working group under Commission 5.

SDDL- SOFTWARE DESIGN AND DOCUMENTATION LANGUAGE

NASA Technical Reports Server (NTRS)

Kleine, H.

1994-01-01

Effective, efficient communication is an essential element of the software development process. The Software Design and Documentation Language (SDDL) provides an effective communication medium to support the design and documentation of complex software applications. SDDL supports communication between all the members of a software design team and provides for the production of informative documentation on the design effort. Even when an entire development task is performed by a single individual, it is important to explicitly express and document communication between the various aspects of the design effort including concept development, program specification, program development, and program maintenance. SDDL ensures that accurate documentation will be available throughout the entire software life cycle. SDDL offers an extremely valuable capability for the design and documentation of complex programming efforts ranging from scientific and engineering applications to data management and business sytems. Throughout the development of a software design, the SDDL generated Software Design Document always represents the definitive word on the current status of the ongoing, dynamic design development process. The document is easily updated and readily accessible in a familiar, informative form to all members of the development team. This makes the Software Design Document an effective instrument for reconciling misunderstandings and disagreements in the development of design specifications, engineering support concepts, and the software design itself. Using the SDDL generated document to analyze the design makes it possible to eliminate many errors that might not be detected until coding and testing is attempted. As a project management aid, the Software Design Document is useful for monitoring progress and for recording task responsibilities. SDDL is a combination of language, processor, and methodology. The SDDL syntax consists of keywords to invoke design structures and a collection of directives which control processor actions. The designer has complete control over the choice of keywords, commanding the capabilities of the processor in a way which is best suited to communicating the intent of the design. The SDDL processor translates the designer's creative thinking into an effective document for communication. The processor performs as many automatic functions as possible, thereby freeing the designer's energy for the creative effort. Document formatting includes graphical highlighting of structure logic, accentuation of structure escapes and module invocations, logic error detection, and special handling of title pages and text segments. The SDDL generated document contains software design summary information including module invocation hierarchy, module cross reference, and cross reference tables of user selected words or phrases appearing in the document. The basic forms of the methodology are module and block structures and the module invocation statement. A design is stated in terms of modules that represent problem abstractions which are complete and independent enough to be treated as separate problem entities. Blocks are lower-level structures used to build the modules. Both kinds of structures may have an initiator part, a terminator part, an escape segment, or a substructure. The SDDL processor is written in PASCAL for batch execution on a DEC VAX series computer under VMS. SDDL was developed in 1981 and last updated in 1984.

Document Design: Part 1.

ERIC Educational Resources Information Center

Andrews, Deborah C., Ed.; Dyrud, Marilyn, Ed.

1996-01-01

Presents four articles that provide suggestions for teaching document design: (1) "Teaching the Rhetoric of Document Design" (Michael J. Hassett); (2) "Teaching by Example: Suggestions for Assignment Design" (Marilyn A. Dyrud); (3) "Teaching the Page as a Visual Unit" (Bill Hart-Davidson); and (4) "Designing a…

It's about Time: A Resource Unit.

ERIC Educational Resources Information Center

Beckwith, Chris; Cassida, Joanne; Cote, Brian; James, Amy; Lane, Steven; O'Donnell, Heidi; Stroble, Suzanne; Tracy, Stacie

Noting that middle level teachers interested in involving their students in curriculum planning and instruction need resource materials to draw on, this document presents such a resource unit developed by a group of eight veteran middle level teachers and designed to be used within an integrated curriculum framework. Part 1 introduces the unit,…

The Information Bazaar; Sixth Annual National Colloquium on Information Retrieval, May 8-9, 1969, Philadelphia, Pennsylvania.

ERIC Educational Resources Information Center

Schultz, Louise, Ed.

The 31 papers in this proceedings cover social as well as technical issues, mathematical models and formal logic systems, applications descriptions, program design, cost analysis, and predictions. The papers are grouped into sessions including: privacy and information technology, describing documents, information dissemination systems, public and…

Peer Assessments of GPW: Infusing Fairness into Students' Assessments of Peer Contributions

ERIC Educational Resources Information Center

Onyia, Okey Peter; Allen, Stephanie

2012-01-01

This paper contains results of an empirical study that tested the efficacy and acceptability of two templates designed to fully involve students in proper and fair peer-assessments of their group project work (GPW) by providing concrete evidence of independent progressive documentation of their peers' contributions to the work-process and…

Explorations; Part I, Revised: Career Activities for Adult Education Classes.

ERIC Educational Resources Information Center

Feingold, S. Norman

The Adult Career Education Resources Survey was designed to (a) compile career information resources for adults and (b) provide materials that will encourage adult educators to integrate career education activities into ongoing curricula. The document was developed and revised by the Suvey staff to meet the second objective; it provides a group of…

Leadership in Vocational Education and Training: Leadership By Design, Not By Default.

ERIC Educational Resources Information Center

Falk, Ian; Smith, Tony

A study looked at knowledge and theory on vocational education and training (VET) leadership in a range of diverse sites in Australia. Twelve chosen sites fell into these three broad groups: technical and further education, other public providers, and private providers. Researchers gathered documents, survey responses, and individual and group…

Social Perception and Judgment. Annotated Bibliography of Tests.

ERIC Educational Resources Information Center

Educational Testing Service, Princeton, NJ. Test Collection.

The 75 tests in this bibliography include those designed to measure one's sensitivity and ability to deal with social interactions. These tests measure social perception, social intelligence, and sensitivity to nonverbal communications, etc. for a variety of age levels and groups. This document is one in a series of topical bibliographies from the…

Exploring Work: Fun Activities for Girls.

ERIC Educational Resources Information Center

Education Development Center, Inc., Newton, MA. Women's Educational Equity Act Dissemination Center.

This document contains learning activities to help middle school girls begin the career planning process and resist gender-role stereotyping. The activities are designed for individuals and/or groups of girls either in classroom settings or in organizations such as Girl Scouts and 4-H Clubs. A total of 30 activities are organized into 4 sections…

Electronics. Criterion-Referenced Test (CRT) Item Bank.

ERIC Educational Resources Information Center

Davis, Diane, Ed.

This document contains 519 criterion-referenced multiple choice and true or false test items for a course in electronics. The test item bank is designed to work with both the Vocational Instructional Management System (VIMS) and the Vocational Administrative Management System (VAMS) in Missouri. The items are grouped into 15 units covering the…

Auto Mechanics. Criterion-Referenced Test (CRT) Item Bank.

ERIC Educational Resources Information Center

Tannehill, Dana, Ed.

This document contains 546 criterion-referenced multiple choice and true or false test items for a course in auto mechanics. The test item bank is designed to work with both the Vocational Instructional Management System (VIMS) and Vocational Administrative Management System (VAMS) in Missouri. The items are grouped into 35 units covering the…

78 FR 38713 - Additional Documents Available for Public Review Related to Willingness To Pay Survey for...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-06-27

... Maximum Daily Load: Instrument, Pre-test, and Implementation'' (EPA ICR No. 2456.01, OMB Control No. 2010..., the Focus Group and Cognitive Interview Report and the Description of Hydrological, Biochemical, and... information to interested parties regarding the development and design of the survey instruments proposed for...

Learning about Whole-Class Scaffolding from a Teacher Professional Development Study

ERIC Educational Resources Information Center

Visnovska, Jana; Cobb, Paul

2015-01-01

The importance of teachers developing adaptive instructional practices consistent with metaphor of whole-class scaffolding has been well documented. However, teachers' development of such practices is currently not well understood. We draw on a 5-year professional development (PD) design experiment in which a group of middle school mathematics…

Who Says You Can't Teach Science? Grades K-6.

ERIC Educational Resources Information Center

Ticotsky, Alan

Designed to help adults guide elementary school age children toward an understanding of the natural world, this document presents a step-by-step experiential introduction to general science. Developed for use by teachers, parents, camp counselors, and youth group leaders, it discusses ways to overcome restrictions such as lack of student aptitude,…

AAAS: Automated Affirmative Action System. General Description, Phase 1.

ERIC Educational Resources Information Center

Institute for Services to Education, Inc., Washington, DC. TACTICS Management Information Systems Directorate.

This document describes phase 1 of the Automated Affirmative Action System (AAAS) of the Tuskegee Institute, which was designed to organize an inventory of any patterns of job classification and assignment identifiable by sex or minority group; any job classification or organizational unit where women and minorities are not employed or are…

Informed consent document improvement does not increase patients' comprehension in biomedical research

PubMed Central

Paris, Adeline; Brandt, Christian; Cornu, Catherine; Maison, Patrick; Thalamas, Claire; Cracowski, Jean-Luc

2010-01-01

AIMS International guidelines on ethics in biomedical research require that the informed consent of all enrolled participants is obtained. A written document describing the research, the informed consent (IC) document, must be given to all participants by the investigator. Most IC documents are long, containing much information. The aim of the present study was to determine whether the modification of the IC document by a working group or systematic improvement in its lexicosyntactic readability can improve comprehension of the written information given to patients participating in biomedical research. METHODS One hundred and fifty-nine patients were randomized to read one of the three versions of the IC document: unchanged document, document modified using systematic improvement of lexicosyntactic readability and document modified by a working group. RESULTS Neither the improvement in the lexicosyntactic readability, nor the intervention of the working group significantly improved the score of objective comprehension for the subjects included in this study: it was 66.6 (95% confidence interval 64.0, 69.2) for the control group, 68.8 (66.2, 71.4) for the group with the document improved for lexicosyntactic readability and 69.2 (66.0, 72.4) for the group who read the document improved by the working group (P= 0.38). CONCLUSIONS We failed to show that improving IC document comprehension through a lexicosyntactic approach or by a working group leads to better comprehension. PMID:20233193

Impacts of Computerized Physician Documentation in a Teaching Hospital: Perceptions of Faculty and Resident Physicians

PubMed Central

Embi, Peter J.; Yackel, Thomas R.; Logan, Judith R.; Bowen, Judith L.; Cooney, Thomas G.; Gorman, Paul N.

2004-01-01

Objective: Computerized physician documentation (CPD) has been implemented throughout the nation's Veterans Affairs Medical Centers (VAMCs) and is likely to increasingly replace handwritten documentation in other institutions. The use of this technology may affect educational and clinical activities, yet little has been reported in this regard. The authors conducted a qualitative study to determine the perceived impacts of CPD among faculty and housestaff in a VAMC. Design: A cross-sectional study was conducted using semistructured interviews with faculty (n = 10) and a group interview with residents (n = 10) at a VAMC teaching hospital. Measurements: Content analysis of field notes and taped transcripts were done by two independent reviewers using a grounded theory approach. Findings were validated using member checking and peer debriefing. Results: Four major themes were identified: (1) improved availability of documentation; (2) changes in work processes and communication; (3) alterations in document structure and content; and (4) mistakes, concerns, and decreased confidence in the data. With a few exceptions, subjects felt documentation was more available, with benefits for education and patient care. Other impacts of CPD were largely seen as detrimental to aspects of clinical practice and education, including documentation quality, workflow, professional communication, and patient care. Conclusion: CPD is perceived to have substantial positive and negative impacts on clinical and educational activities and environments. Care should be taken when designing, implementing, and using such systems to avoid or minimize any harmful impacts. More research is needed to assess the extent of the impacts identified and to determine the best strategies to effectively deal with them. PMID:15064287

Development of the Quality of Australian Nursing Documentation in Aged Care (QANDAC) instrument to assess paper-based and electronic resident records.

PubMed

Wang, Ning; Björvell, Catrin; Hailey, David; Yu, Ping

2014-12-01

To develop an Australian nursing documentation in aged care (Quality of Australian Nursing Documentation in Aged Care (QANDAC)) instrument to measure the quality of paper-based and electronic resident records. The instrument was based on the nursing process model and on three attributes of documentation quality identified in a systematic review. The development process involved five phases following approaches to designing criterion-referenced measures. The face and content validities and the inter-rater reliability of the instrument were estimated using a focus group approach and consensus model. The instrument contains 34 questions in three sections: completion of nursing history and assessment, description of care process and meeting the requirements of data entry. Estimates of the validity and inter-rater reliability of the instrument gave satisfactory results. The QANDAC instrument may be a useful audit tool for quality improvement and research in aged care documentation. © 2013 ACOTA.

Software design and documentation language

NASA Technical Reports Server (NTRS)

Kleine, H.

1977-01-01

A communications medium to support the design and documentation of complex software applications is studied. The medium also provides the following: (1) a processor which can convert design specifications into an intelligible, informative machine reproducible document; (2) a design and documentation language with forms and syntax that are simple, unrestrictive, and communicative; and (3) methodology for effective use of the language and processor.

Design and Documentation: The State of the Art.

ERIC Educational Resources Information Center

Gibbons, Andrew S.

1998-01-01

Although the trend is for less documentation, this article argues that more is needed to help in the analysis of design failure in instructional design. Presents arguments supporting documented design, including error recognition and correction, verification of completeness and soundness, sharing of new design principles, modifiability, error…

Small Group Health Insurance Reform in Rhode Island: Promises and Pitfalls of the HEALTHpact Plan

PubMed Central

Alan Miller, Edward; Trivedi, Amal; Kuo, Sylvia; Mor, Vincent

2011-01-01

Objective This study analyzes what design elements inhibited enrollment in HEALTHpact. Study Setting HEALTHpact is a high deductible plan with a premium capped at 10 percent of the average Rhode Island wage. Deductibles are reduced if enrollees meet wellness criteria. Study Design Qualitative case study. Data Collection Archival documents and 23 interviews. Principal Findings Inclusion of a subsidy would have led to lower premiums and more generous coverage. Although priced lower than other plans, HEALTHpact still did not offer good value for most firms. Wellness incentives also were too complex. Conclusions Subsidies for purchase of insurance coverage are critical to national reform of the small group market. Designers also will need to carefully balance program complexity with innovation in encouraging wellness and product appeal. PMID:21054375

Tank Monitoring and Document control System (TMACS) As Built Software Design Document

DOE Office of Scientific and Technical Information (OSTI.GOV)

GLASSCOCK, J.A.

This document describes the software design for the Tank Monitor and Control System (TMACS). This document captures the existing as-built design of TMACS as of November 1999. It will be used as a reference document to the system maintainers who will be maintaining and modifying the TMACS functions as necessary. The heart of the TMACS system is the ''point-processing'' functionality where a sample value is received from the field sensors and the value is analyzed, logged, or alarmed as required. This Software Design Document focuses on the point-processing functions.

Software design and documentation language, revision 1

NASA Technical Reports Server (NTRS)

Kleine, H.

1979-01-01

The Software Design and Documentation Language (SDDL) developed to provide an effective communications medium to support the design and documentation of complex software applications is described. Features of the system include: (1) a processor which can convert design specifications into an intelligible, informative machine-reproducible document; (2) a design and documentation language with forms and syntax that are simple, unrestrictive, and communicative; and (3) methodology for effective use of the language and processor. The SDDL processor is written in the SIMSCRIPT II programming language and is implemented on the UNIVAC 1108, the IBM 360/370, and Control Data machines.

Anxiety in speakers who persist and recover from stuttering.

PubMed

Davis, Stephen; Shisca, Daniella; Howell, Peter

2007-01-01

The study was designed to see whether young children and adolescents who persist in their stutter (N=18) show differences in trait and/or state anxiety compared with people who recover from their stutter (N=17) and fluent control speakers (N=19). A fluent control group, a group of speakers who have been documented as stuttering in the past but do not stutter now and a group of speakers (also with a documented history of stuttering) who persist in their stuttering participated, all aged 10-17 years. The State-Trait Anxiety Inventory for Children was administered. There were no differences between persistent, recovered and control groups with regard to trait anxiety. The persistent group had higher state anxiety than controls and the recovered group for three out of four speaking situations. The findings are interpreted as showing that anxiety levels in certain affective states appear to be associated with the speaking problem. A reader should be able to appreciate the difference between state and trait anxiety understand views about how the role anxiety has on stuttering has changed over time appreciate different views about how anxiety affects speakers who persist and recover from stuttering see why longitudinal work is needed to study these issues.

Software Interface Assessment of the Centralized Aviation Flight Records System (CAFRS) 4.0

DTIC Science & Technology

2015-05-01

administrator based on the role of the user needing the permission. Within CAFRS, some permissions are grouped into common roles based on job...simplify. Ex: “Compl RL3 ref tng – Designated RL2 D/N, RL3 Night Vision Goggles (NVG)”. • Once entry is made on 7122 initial and signed and remark... designated by other authorized documents. Citation of manufacturer’s or trade names does not constitute an official endorsement or approval of the use

The Synthetic Biology Open Language (SBOL) provides a community standard for communicating designs in synthetic biology.

PubMed

Galdzicki, Michal; Clancy, Kevin P; Oberortner, Ernst; Pocock, Matthew; Quinn, Jacqueline Y; Rodriguez, Cesar A; Roehner, Nicholas; Wilson, Mandy L; Adam, Laura; Anderson, J Christopher; Bartley, Bryan A; Beal, Jacob; Chandran, Deepak; Chen, Joanna; Densmore, Douglas; Endy, Drew; Grünberg, Raik; Hallinan, Jennifer; Hillson, Nathan J; Johnson, Jeffrey D; Kuchinsky, Allan; Lux, Matthew; Misirli, Goksel; Peccoud, Jean; Plahar, Hector A; Sirin, Evren; Stan, Guy-Bart; Villalobos, Alan; Wipat, Anil; Gennari, John H; Myers, Chris J; Sauro, Herbert M

2014-06-01

The re-use of previously validated designs is critical to the evolution of synthetic biology from a research discipline to an engineering practice. Here we describe the Synthetic Biology Open Language (SBOL), a proposed data standard for exchanging designs within the synthetic biology community. SBOL represents synthetic biology designs in a community-driven, formalized format for exchange between software tools, research groups and commercial service providers. The SBOL Developers Group has implemented SBOL as an XML/RDF serialization and provides software libraries and specification documentation to help developers implement SBOL in their own software. We describe early successes, including a demonstration of the utility of SBOL for information exchange between several different software tools and repositories from both academic and industrial partners. As a community-driven standard, SBOL will be updated as synthetic biology evolves to provide specific capabilities for different aspects of the synthetic biology workflow.

Stratification, Elaboration and Formalisation of Design Documents: Effects on the Production of Instructional Materials

ERIC Educational Resources Information Center

Boot, Eddy W.; Nelson, Jon; van Merrienboer, Jeroen J. G.; Gibbons, Andrew S.

2007-01-01

Designers and producers of instructional materials lack a common design language. As a result, producers have difficulties translating design documents into technical specifications. The 3D-model is introduced to improve the stratification, elaboration and formalisation of design documents. It is hypothesised that producers working with improved…

Evaluation of a mHealth Data Quality Intervention to Improve Documentation of Pregnancy Outcomes by Health Surveillance Assistants in Malawi: A Cluster Randomized Trial

PubMed Central

Joos, Olga; Silva, Romesh; Amouzou, Agbessi; Moulton, Lawrence H.; Perin, Jamie; Bryce, Jennifer; Mullany, Luke C.

2016-01-01

Background While community health workers are being recognized as an integral work force with growing responsibilities, increased demands can potentially affect motivation and performance. The ubiquity of mobile phones, even in hard-to-reach communities, has facilitated the pursuit of novel approaches to support community health workers beyond traditional modes of supervision, job aids, in-service training, and material compensation. We tested whether supportive short message services (SMS) could improve reporting of pregnancies and pregnancy outcomes among community health workers (Health Surveillance Assistants, or HSAs) in Malawi. Methods and Findings We designed a set of one-way SMS that were sent to HSAs on a regular basis during a 12-month period. We tested the effectiveness of the cluster-randomized intervention in improving the complete documentation of a pregnancy. We defined complete documentation as a pregnancy for which a specific outcome was recorded. HSAs in the treatment group received motivational and data quality SMS. HSAs in the control group received only motivational SMS. During baseline and intervention periods, we matched reported pregnancies to reported outcomes to determine if reporting of matched pregnancies differed between groups and by period. The trial is registered as ISCTRN24785657. Conclusions Study results show that the mHealth intervention improved the documentation of matched pregnancies in both the treatment (OR 1.31, 95% CI: 1.10–1.55, p<0.01) and control (OR 1.46, 95% CI: 1.11–1.91, p = 0.01) groups relative to the baseline period, despite differences in SMS content between groups. The results should be interpreted with caution given that the study was underpowered. We did not find a statistically significant difference in matched pregnancy documentation between groups during the intervention period (OR 0.94, 95% CI: 0.63–1.38, p = 0.74). mHealth applications have the potential to improve the tracking and data quality of pregnancies and pregnancy outcomes, particularly in low-resource settings. PMID:26731401

Gas-grain simulation facility: Aerosol and particle research in microgravity

NASA Technical Reports Server (NTRS)

Huntington, Judith L. (Editor); Greenwald, Ken (Editor); Rogers, C. Fred (Editor); Stratton, David M. (Editor); Simmons, Brenda (Editor); Fonda, Mark L. (Editor)

1994-01-01

This document reports on the proceedings of the Gas-Grain Simulation Facility (GGSF) Science Workshop which was co-hosted by NASA Ames Research Center and Desert Research Institute, University of Nevada System, and held in Las Vegas, Nevada, on May 4-6, 1992. The intent of the workshop was to bring together the science community of potential GGSF experimenters, Science Working Group and staff members, and the Phase A contractor to review the Phase A design with the science participants and to facilitate communication between the science community and the hardware developers. The purpose of this report is to document the information disseminated at the workshop, to record the participants' review of the Phase A GGSF design concept and the current science and technical requirements for the Facility, and to respond to any questions or concerns that were raised at the Workshop. Recommendations for the future based on numerous discussions with the participants are documented, as well as science presentations and poster sessions that were given at the Workshop and a summary of 21 candidate experiments.

[Consensus document on the prevention of exposure to methylmercury in Spain].

PubMed

González-Estecha, Montserrat; Bodas-Pinedo, Andrés; Guillén-Pérez, José Jesús; Rubio-Herrera, Miguel Ángel; Martínez-Álvarez, Jesús Román; Herráiz-Martínez, Miguel Ángel; Martell-Claros, Nieves; Ordóñez-Iriarte, José M; Sáinz-Martín, María; Farré-Rovira, Rosaura; Martínez-Astorquiza, Txantón; García-Donaire, José Antonio; Calvo-Manuel, Elpidio; Bretón-Lesmes, Irene; Prieto-Menchero, Santiago; Llorente-Ballesteros, M Teresa; Martínez-García, M José; Moreno-Rojas, Rafael; Salas-Salvadó, Jordi; Bermejo-Barrera, Pilar; Cuadrado-Cenzual, María Ángeles; Gallardo-Pino, Carmen; Blanco Fuentes, María; Torres-Moreno, Miriam; Trasobares-Iglesias, Elena M; Barceló Martín, Bernardino; Arroyo-Fernández, Manuel; Calle-Pascual, Alfonso

2014-11-21

The beneficial effects of fish consumption in both children and adults are well known. However, the intake of methylmercury, mainly from contaminated fish and shellfish, can have adverse health effects. The study group on the prevention of exposure to methylmercury (GEPREM-Hg), made up of representatives from different Spanish scientific societies, has prepared a consensus document in a question and answer format, containing the group's main conclusions, recommendations and proposals. The objective of the document is to provide broader knowledge of factors associated with methylmercury exposure, its possible effects on health among the Spanish population, methods of analysis, interpretation of the results and economic costs, and to then set recommendations for fish and shellfish consumption. The group sees the merit of all initiatives aimed at reducing or prohibiting the use of mercury as well as the need to be aware of the results of contaminant analyses performed on fish and shellfish marketed in Spain. In addition, the group believes that biomonitoring systems should be set up in order to follow the evolution of methylmercury exposure in children and adults and perform studies designed to learn more about the possible health effects of concentrations found in the Spanish population, ta king into account the lifestyle, eating patterns and the Mediterranean diet. Copyright AULA MEDICA EDICIONES 2014. Published by AULA MEDICA. All rights reserved.

Supportive Training for Inexperienced and New Teachers (STINT). Part I.

ERIC Educational Resources Information Center

Fox, David J.; And Others

This document is an evaluative description of the program conducted by the New York City Board of Education during the 1968-69 school year. Opening chapters describe the two-phase evaluation design (descriptive and qualitative) and outline the program in which an initial group of 152 master teachers plus 100 more added in Febraury were assigned as…

Developing Ethnic Talent in the Dutch National Tax Administration: A Case Study

ERIC Educational Resources Information Center

Glastra, Folke J.; Meerman, Martha

2012-01-01

Purpose: The lack of career movement of members of ethnic minority groups in work organizations has been widely documented. The purpose of this paper is to gain insight into conditions for the realization of diversity goals in the case of talent development. Design/methodology/approach: In a case study of management development in the Dutch…

The Teenage Nonviolence Test: Concurrent and Discriminant Validity.

ERIC Educational Resources Information Center

Konen, Kristopher; Mayton, Daniel M., II; Delva, Zenita; Sonnen, Melinda; Dahl, William; Montgomery, Richard

This study was designed to document the validity of the Teenage Nonviolence Test (TNT). In this study the concurrent validity of the TNT in various ways, the validity of the TNT using known groups, and the discriminant validity of the TNT by evaluating its relationships with other psychological constructs were assessed. The results showed that the…

Reds, Greens, Yellows Ease the Spelling Blues.

ERIC Educational Resources Information Center

Irwin, Virginia

1971-01-01

This document reports on a color-coding innovation designed to improve the spelling ability of high school seniors. This color-coded system is based on two assumptions: that color will appeal to the students and that there are three principal reasons for misspelling. Two groups were chosen for the experiments. A basic list of spelling demons was…

Appendix: Case Studies. Strong Neighborhoods, Strong Schools. The Indicators Project on Education Organizing.

ERIC Educational Resources Information Center

Gold, Eva; Simon, Elaine; Brown, Chris; Blanc, Suzanne; Pickron-Davis, Marcine; Brown, Joanna; Navarez-La Torre, Aida

This report presents summaries of five case studies from the Indicators Project on Education Organizing, which was designed to examine the role of community organizing in school reform. For over 2 years, this action research project documented the education organizing of five urban groups. The research developed an Education Organizing Indicators…

Technology for large space systems: A bibliography with indexes (supplement 07)

NASA Technical Reports Server (NTRS)

1983-01-01

This bibliography lists 366 reports, articles and other documents introduced into the NASA scientific and technical information system between January 1, 1982 and June 30, 1982. Subject matter is grouped according to systems, interactive analysis and design, structural concepts, control systems, electronics, advanced materials, assembly concepts, propulsion, solar power satellite systems, and flight experiments.

Public School Principals: Opinions and Status. ERS Educator Opinion Poll.

ERIC Educational Resources Information Center

Educational Research Service, Arlington, VA.

The opinion poll of public school administrators reported in this document is part of a series designed to report scientifically collected data that accurately reflects the views and experiences of specific groups of educators. For this study, a total of 3,300 principals were included in the random sample and 1,502 (46 percent) responded. Tables…

Documentary Photography: Cognitive Dimensionality of Selected Photographs and Community Perceptions in a Coorientation Model.

ERIC Educational Resources Information Center

Brown, James W.; Foushee, Richard E.

This paper discusses a proposed term project for a course in documentary photography that centered on photographically documenting a rural community and measuring its symbolic sociodramas. The paper describes the focus of the project, which was to determine how various community groups interpreted a given set of photographs designed to express a…

Cognitive Mechanisms, Specificity and Neural Underpinnings of Visuospatial Peaks in Autism

ERIC Educational Resources Information Center

Caron, M.-J.; Mottron, L.; Berthiaume, C.; Dawson, M.

2006-01-01

In order to explain the cognitive and cerebral mechanisms responsible for the visuospatial peak in autism, and to document its specificity to this condition, a group of eight high-functioning individuals with autism and a visuospatial peak (HFA-P) performed a modified block-design task (BDT; subtest from Wechsler scales) at various levels of…

Prevention of Cyberbullying and Cyber Victimization: Evaluation of the ViSC Social Competence Program

ERIC Educational Resources Information Center

Gradinger, Petra; Yanagida, Takuya; Strohmeier, Dagmar; Spiel, Christiane

2015-01-01

It is well-documented that cyberbullying and victimization co-occur with traditional forms indicating that they share similar mechanisms. Therefore, it was hypothesized that the general antibullying program ViSC might also be effective in tackling these new forms of bullying. A longitudinal randomized control group design has been applied to…

A Blended Approach to Reading and Writing Graphic Stories

ERIC Educational Resources Information Center

Brown, Sally

2013-01-01

This article documents the experiences of a diverse group of second grade students during a nine week unit of study focused on graphic stories. The project begins as the class is immersed in reading graphic stories designed for young readers. Images, written text, and dialog are utilized to scaffold reading comprehension and to practice fluency.…

Apple IIe Computers and Appleworks Training Mini Course Materials.

ERIC Educational Resources Information Center

Schlenker, Richard M.

The instructional materials included in this document are designed to introduce students to the Apple IIe computer and to the word processing and database portions of the AppleWorks program. The materials are intended for small groups of students, each of whom has use of a computer during class and for short periods between classes. The course…

Older/Younger Sibling Pairs in the Context of a Community Outreach Children's Choir

ERIC Educational Resources Information Center

Fredrickson, William E.; Byrnes, Suzanne R.; Aycock, Sylvia R.

2018-01-01

This article was designed to explore the behaviors observed and document the interactions of older and younger siblings in a children's choir rehearsal environment. Observations by a music education student observer, the director/teacher of the group, and some parent recollections indicate that the sibling interactions do have a primarily positive…

Teacher Perceptions of the Impact of the Data Team Process on Core Instructional Practices

ERIC Educational Resources Information Center

Schwanenberger, Michael; Ahearn, Christopher

2013-01-01

This paper documents the results of a mixed method study of teachers who participated in a survey and focus groups in a K-12 southwestern suburban school district during the 2011-2012 school year. The mixed method design contains elements of both qualitative and quantitative approaches, permitting the authors to collect qualitative and…

The Elder Abuse Prevention Project, Phase Two, Three and Four. Final Report.

ERIC Educational Resources Information Center

Regina Univ. (Saskatchewan). Univ. Extension. Seniors Education Centre.

This document presents the final report from an educational and community development program designed to raise awareness about the abuse and neglect of the elderly. The Elder Abuse Prevention Project is briefly described in terms of project goals, objectives, the model used, the target groups served, and the evaluation processes employed. It is…

Finnish Upper Secondary Students' Collaborative Processes in Learning Statistics in a CSCL Environment

ERIC Educational Resources Information Center

Oikarinen, Juho Kaleva; Järvelä, Sanna; Kaasila, Raimo

2014-01-01

This design-based research project focuses on documenting statistical learning among 16-17-year-old Finnish upper secondary school students (N = 78) in a computer-supported collaborative learning (CSCL) environment. One novel value of this study is in reporting the shift from teacher-led mathematical teaching to autonomous small-group learning in…

Modular Integrated Stackable Layers (MISL) MI_MSP430A Board Design Document (BDD)

NASA Technical Reports Server (NTRS)

Yim, Hester

2013-01-01

This is a board-level design document for Modular Integrated Stackable Layers (MISL) MI_MSP430A board (PIN MSP430F5438A). The Board Design Document (BDD) contains the description, features of microcontroller, electrical and mechanical design, and drawings.

The Software Design Document: More than a User's Manual.

ERIC Educational Resources Information Center

Bowers, Dennis

1989-01-01

Discusses the value of creating design documentation for computer software so that it may serve as a model for similar design efforts. Components of the software design document are described, including program flowcharts, graphic representation of screen displays, storyboards, and evaluation procedures. An example is given using HyperCard. (three…

Development of an open metadata schema for prospective clinical research (openPCR) in China.

PubMed

Xu, W; Guan, Z; Sun, J; Wang, Z; Geng, Y

2014-01-01

In China, deployment of electronic data capture (EDC) and clinical data management system (CDMS) for clinical research (CR) is in its very early stage, and about 90% of clinical studies collected and submitted clinical data manually. This work aims to build an open metadata schema for Prospective Clinical Research (openPCR) in China based on openEHR archetypes, in order to help Chinese researchers easily create specific data entry templates for registration, study design and clinical data collection. Singapore Framework for Dublin Core Application Profiles (DCAP) is used to develop openPCR and four steps such as defining the core functional requirements and deducing the core metadata items, developing archetype models, defining metadata terms and creating archetype records, and finally developing implementation syntax are followed. The core functional requirements are divided into three categories: requirements for research registration, requirements for trial design, and requirements for case report form (CRF). 74 metadata items are identified and their Chinese authority names are created. The minimum metadata set of openPCR includes 3 documents, 6 sections, 26 top level data groups, 32 lower data groups and 74 data elements. The top level container in openPCR is composed of public document, internal document and clinical document archetypes. A hierarchical structure of openPCR is established according to Data Structure of Electronic Health Record Architecture and Data Standard of China (Chinese EHR Standard). Metadata attributes are grouped into six parts: identification, definition, representation, relation, usage guides, and administration. OpenPCR is an open metadata schema based on research registration standards, standards of the Clinical Data Interchange Standards Consortium (CDISC) and Chinese healthcare related standards, and is to be publicly available throughout China. It considers future integration of EHR and CR by adopting data structure and data terms in Chinese EHR Standard. Archetypes in openPCR are modularity models and can be separated, recombined, and reused. The authors recommend that the method to develop openPCR can be referenced by other countries when designing metadata schema of clinical research. In the next steps, openPCR should be used in a number of CR projects to test its applicability and to continuously improve its coverage. Besides, metadata schema for research protocol can be developed to structurize and standardize protocol, and syntactical interoperability of openPCR with other related standards can be considered.

Issue of Building Information Modelling Implementation into the Czech Republic’s Legislation using the Level of Development

NASA Astrophysics Data System (ADS)

Prušková, Kristýna; Nývlt, Vladimír

2017-10-01

The object of this paper is the issue of links between the Level of Development of particular project in Building Information Modeling environment and the projects of certain stages of project documentation within the existing Czech Republic’s Legislation. This research article uses the experiences from the initiative of active working group „WG#03: BIM & Realization“, which is the part of the Czech BIM Council, especially the document called “Draft of unified data structure for Building Information Modeling in the Czech Republic”. The findings of this paper are in the defining specific Level of Development of relative parameters, mentioned in this document, connected to the specific level of information and details requested by the Czech Republic’s Legislation. These findings could be used as an underlay to create document called “Level of Development draft assignment to the individual stages of project documentation in the Czech Republic”. The Level of Development is the most useful way of the information visualization, which leads to the most effortless way of exact stated implementation of Building Information Modeling into the practice of designing structures and buildings in the Czech Republic. The Implementation of using Building Information Modeling technology in designing structures and buildings will lead to the enhanced quality of the project documentation and generally to more effective cost savings during whole life cycle of buildings. Moreover, the all over using of the BIM technology in the Czech Republic will be very useful in the Facility Management area, especially in the facility management and maintenance of state buildings.

A pilot study of a heuristic algorithm for novel template identification from VA electronic medical record text.

PubMed

Redd, Andrew M; Gundlapalli, Adi V; Divita, Guy; Carter, Marjorie E; Tran, Le-Thuy; Samore, Matthew H

2017-07-01

Templates in text notes pose challenges for automated information extraction algorithms. We propose a method that identifies novel templates in plain text medical notes. The identification can then be used to either include or exclude templates when processing notes for information extraction. The two-module method is based on the framework of information foraging and addresses the hypothesis that documents containing templates and the templates within those documents can be identified by common features. The first module takes documents from the corpus and groups those with common templates. This is accomplished through a binned word count hierarchical clustering algorithm. The second module extracts the templates. It uses the groupings and performs a longest common subsequence (LCS) algorithm to obtain the constituent parts of the templates. The method was developed and tested on a random document corpus of 750 notes derived from a large database of US Department of Veterans Affairs (VA) electronic medical notes. The grouping module, using hierarchical clustering, identified 23 groups with 3 documents or more, consisting of 120 documents from the 750 documents in our test corpus. Of these, 18 groups had at least one common template that was present in all documents in the group for a positive predictive value of 78%. The LCS extraction module performed with 100% positive predictive value, 94% sensitivity, and 83% negative predictive value. The human review determined that in 4 groups the template covered the entire document, with the remaining 14 groups containing a common section template. Among documents with templates, the number of templates per document ranged from 1 to 14. The mean and median number of templates per group was 5.9 and 5, respectively. The grouping method was successful in finding like documents containing templates. Of the groups of documents containing templates, the LCS module was successful in deciphering text belonging to the template and text that was extraneous. Major obstacles to improved performance included documents composed of multiple templates, templates that included other templates embedded within them, and variants of templates. We demonstrate proof of concept of the grouping and extraction method of identifying templates in electronic medical records in this pilot study and propose methods to improve performance and scaling up. Published by Elsevier Inc.

Validity of medical record documented varicella-zoster virus among unvaccinated cohorts

PubMed Central

Mohanty, Salini; Perella, Dana; Jumaan, Aisha; Robinson, Donovan; Forke, Christine M; Schmid, D Scott; Renwick, Mia; Mankodi, Foram; Watson, Barbara; Fiks, Alexander G

2013-01-01

Background: A varicella diagnosis or verification of disease history by any healthcare provider is currently accepted for determining evidence of immunity by the Advisory Committee on Immunization Practices (ACIP). Objective: To examine the accuracy of medical record (MR) documented varicella history as a measure of varicella-zoster virus (VZV) immunity among unvaccinated individuals born after 1980. We also assessed methods to practically implement ACIP guidelines to verify varicella history using medical records. Study Design: As part of a larger cross-sectional study conducted at three Philadelphia clinics from 2004–2006, we recruited 536 unvaccinated patients aged 5–19 y (birth years: 1985–2001). Varicella history was obtained from three sources: parent/patient interview, any MR documentation (sick and well visits) and MR documentation of a sick visit for varicella. All participants were tested for VZV IgG. For each source and three age groups (5–9, 10–14, 15–19 y old), positive predictive value (PPV) was calculated. Specificity of varicella history was compared between different sources using McNemar’s Chi-square. Results: Among participants aged 5–9, 10–14 and 15–19 y the PPV for any MR documentation and sick visit diagnosis were 96% and 100%, 92% and 97%, and 99% and 100%, respectively. The specificity for sick visit documentation was higher than any MR documentation and patient/parent recall among all age groups; however, these differences were only statistically significant when comparing sick visit documentation to parent/patient recall for 10-14 y olds. Conclusion: Sick visit documentation of varicella in the MR is an accurate predictor of varicella seropositivity and useful for confirming disease history among unvaccinated persons (birth years: 1985–2001). This method is a practical way to verify varicella history using the ACIP guidelines. PMID:23807363

Ada Structure Design Language (ASDL)

NASA Technical Reports Server (NTRS)

Chedrawi, Lutfi

1986-01-01

An artist acquires all the necessary tools before painting a scene. In the same analogy, a software engineer needs the necessary tools to provide their design with the proper means for implementation. Ada provide these tools. Yet, as an artist's painting needs a brochure to accompany it for further explanation of the scene, an Ada design also needs a document along with it to show the design in its detailed structure and hierarchical order. Ada could be self-explanatory in small programs not exceeding fifty lines of code in length. But, in a large environment, ranging from thousands of lines and above, Ada programs need to be well documented to be preserved and maintained. The language used to specify an Ada document is called Ada Structure Design Language (ASDL). This language sets some rules to help derive a well formatted Ada detailed design document. The rules are defined to meet the needs of a project manager, a maintenance team, a programmer and a systems designer. The design document templates, the document extractor, and the rules set forth by the ASDL are explained in detail.

Space station definition and preliminary design, WP-01. Volume 2: Results

NASA Technical Reports Server (NTRS)

Lenda, J. A.

1987-01-01

The basis for the studies and analyses which led to the results and conclusions documented and summarized, was the Engineering Master Schedule (EMS) generated by NASA and used as the controlling set of milestones and associated activities required to produce in a timely manner those products needed by all program participants in the establishment of an approved program baseline. The EMS consisted of twenty themes grouped into categories covering requirements, configurations, and strategies. A number of studies and analyses that were coordinated with the MSFC program and technical personnel as being needed to provide the requisite back-up material to satify the EMS were identified. These studies and analyses provided the data sufficient to support the conclusions and recommendations given to the MSFC in response to their EMS activity and to support the system level and conceptual design level approaches developed and reflected in the detailed sections of this document.

Working Group Reports and Presentations: Virtual Worlds and Virtual Exploration

NASA Technical Reports Server (NTRS)

LAmoreaux, Claudia

2006-01-01

Scientists and engineers are continually developing innovative methods to capitalize on recent developments in computational power. Virtual worlds and virtual exploration present a new toolset for project design, implementation, and resolution. Replication of the physical world in the virtual domain provides stimulating displays to augment current data analysis techniques and to encourage public participation. In addition, the virtual domain provides stakeholders with a low cost, low risk design and test environment. The following document defines a virtual world and virtual exploration, categorizes the chief motivations for virtual exploration, elaborates upon specific objectives, identifies roadblocks and enablers for realizing the benefits, and highlights the more immediate areas of implementation (i.e. the action items). While the document attempts a comprehensive evaluation of virtual worlds and virtual exploration, the innovative nature of the opportunities presented precludes completeness. The authors strongly encourage readers to derive additional means of utilizing the virtual exploration toolset.

Are Sexual and Reproductive Health Policies Designed for All? Vulnerable Groups in Policy Documents of Four European Countries and Their Involvement in Policy Development.

PubMed

Ivanova, Olena; Dræbel, Tania; Tellier, Siri

2015-08-12

Health policies are important instruments for improving population health. However, experience suggests that policies designed for the whole population do not always benefit the most vulnerable. Participation of vulnerable groups in the policy-making process provides an opportunity for them to influence decisions related to their health, and also to exercise their rights. This paper presents the findings from a study that explored how vulnerable groups and principles of human rights are incorporated into national sexual and reproductive health (SRH) policies of 4 selected countries (Spain, Scotland, Republic of Moldova, and Ukraine). It also aimed at discussing the involvement of vulnerable groups in SRH policy development from the perspective of policy-makers. Literature review, health policy analysis and 5 semi-structured interviews with policy-makers were carried out in this study. Content analysis of SRH policies was performed using the EquiFrame analytical framework. The study revealed that vulnerable groups and core principles of human rights are differently addressed in SRH policies within 4 studied countries. The opinions of policy-makers on the importance of mentioning vulnerable groups in policy documents and the way they ought to be mentioned varied, but they agreed that a clear definition of vulnerability, practical examples, and evidences on health status of these groups have to be included. In addition, different approaches to vulnerable group's involvement in policy development were identified during the interviews and the range of obstacles to this process was discussed by respondents. Incorporation of vulnerable groups in the SRH policies and their involvement in policy development were found to be important in addressing SRH of these groups and providing an opportunity for them to advocate for equal access to healthcare and exercise their rights. Future research on this topic should include representatives of vulnerable communities which could help to build a dialogue and present the problem from multiple perspectives. © 2015 by Kerman University of Medical Sciences.

Learning about Heredity and Embryology. Superific Science Book II. A Good Apple Science Activity Book for Grades 5-8+.

ERIC Educational Resources Information Center

Conway, Lorraine

Designed to provide teachers with low cost laboratory exercises, project ideas, and classroom activities for individuals and groups, this document focuses on the concepts of heredity and embryology. The materials address the topics of: (1) cell division; (2) the identification of the human embryo; (3) chromosomes; (4) DNA; (5) differences in the…

Our Treasures: A Celebration of Nebraska's Mexican Heritage = Nuestros Tesoros: Una celebracion de la herencia mexicana de Nebraska.

ERIC Educational Resources Information Center

Nebraska State Historical Society, Lincoln.

This publication is intended as a resource guide for teachers, students, and librarians interested in Mexican American culture, and for groups wishing to conduct local community research using oral histories. The Mexican American Traditions in Nebraska project was designed to document and preserve the richness of Nebraska's Mexican culture. The…

The Challenges of Integrating Entrepreneurship Education in the Vocational Training System: An Insight from Tanzania's Vocational Education Training Authority

ERIC Educational Resources Information Center

Nkirina, Severina P.

2010-01-01

Purpose: This paper seeks to discuss the challenges faced when trying to integrate entrepreneurship education in the training system, with a particular focus on vocational training. Design/methodology/approach: The data were collected through in-depth interviews, document reviews and focus group discussions. The respondents were drawn from VETA…

Practice-Based Measures of Elementary Science Teachers' Content Knowledge for Teaching: Initial Item Development and Validity Evidence. Research Report. ETS RR-17-43

ERIC Educational Resources Information Center

Mikeska, Jamie N.; Phelps, Geoffrey; Croft, Andrew J.

2017-01-01

This report describes efforts by a group of science teachers, teacher educators, researchers, and content specialists to conceptualize, develop, and pilot practice-based assessment items designed to measure elementary science teachers' content knowledge for teaching (CKT). The report documents the framework used to specify the content-specific…

78 FR 28258 - mPower\\TM\\ Design-Specific Review Standard

Federal Register 2010, 2011, 2012, 2013, 2014

2013-05-14

... Public Documents'' and then select ``Begin Web- based ADAMS Search.'' For problems with ADAMS, please... Classification ML12272A013 3.2.2 System Quality Group ML12272A015 Classification. 3.3.1 Severe Wind Loading... ML12324A156 3.3.2 Extreme Wind Loads ML12324A166 (Tornado and Hurricane Loads). 3.4.1 Internal Flood...

Evaluation of Flowable Fill Surface Performance

DTIC Science & Technology

2016-11-01

Army position unless so designated by other authorized documents. DESTROY THIS REPORT WHEN NO LONGER NEEDED. DO NOT RETURN IT TO THE ORIGINATOR...33 viii Preface This study was conducted for the U.S. Air Force’s (USAF) pavement evaluation teams, contingency readiness groups, base civil...engineers, major command pavement engineers, Rapid Engineer Deployable Heavy Operational Repair Squadron Engineer (RED HORSE) squadrons, and Prime Base

Learning Activity Packets for High School Social Studies, American Studies, American History and Low Achieving Students. Course I.

ERIC Educational Resources Information Center

Seif, Elliott

The document presents student learning packets designed to provide an alternative social studies experience for high school students. The objective is to enable students to better understand themselves and their environment and other individuals and groups. Written at a junior high school reading level, the packets are intended to be used with low…

Guidelines for a Training Program for Audiometric Technicians. Report of Working Group 66.

ERIC Educational Resources Information Center

Glorig, Aram, Ed.; And Others

The document outlines a course designed to train audiometric technicians who will conduct pure-tone conduction tests as part of a program on hearing conservation in noise. A minimum of two days is required for the completion of the course. The outline of the training program presents nine topics with an indication of the minimum time required for…

The Effects of an Energy-Environment Simulator Upon Selected Energy-Related Attitudes of Science Students and In-Service Teachers.

ERIC Educational Resources Information Center

Dunlop, David L.

This document is the outcome of a study designed to investigate the energy-related attitudes of several different groups of science students and science teachers both before and after working with an energy-environment simulator for approximately an hour. During the interaction with the simulator, the participants decided upon the variables they…

Causes of Hunger: A User's Guide for Christian Congregations. Companion Guide to Causes of Hunger: Hunger 1995.

ERIC Educational Resources Information Center

Park, Susan Kay; Simmons, Jim

This document is an interactive, intergenerational guide designed to help organize group or individual study of "Causes of Hunger." The guide includes activities, worship aids, Bible studies, and a resource list--all adapted for classes, weekend retreats, and evening meetings. The guide is divided into nine sessions to be used with a variety of…

Ontology Development for Patient Education Documents Using a Professional- and Patient-Oriented Delphi Method.

PubMed

Heimonen, Juho; Danielsson-Ojala, Riitta; Salakoski, Tapio; Lundgrén-Laine, Heljä; Salanterä, Sanna

2018-04-12

Written patient education materials are essential to motivate and help patients to participate in their own care, but the production and management of a large collection of high-quality and easily accessible patient education documents can be challenging. Ontologies can aid in these tasks, but the existing resources are not directly applicable to patient education. An ontology that models patient education documents and their readers was constructed. The Delphi method was used to identify a compact but sufficient set of entities with which the topics of documents may be described. The preferred terms of the entities were also considered to ensure their understandability. In the ontology, readers may be characterized by gender, age group, language, and role (patient or professional), whereas documents may be characterized by audience, topic(s), and content, as well as the time and place of use. The Delphi method yielded 265 unique document topics that are organized into seven hierarchies. Advantages and disadvantages of the ontology design, as well as possibilities for improvements, were identified. The patient education material ontology can enhance many applications, but further development is needed to reach its full potential.

Validation of the Activities of Community Transportation model for individuals with cognitive impairments.

PubMed

Sohlberg, McKay Moore; Fickas, Stephen; Lemoncello, Rik; Hung, Pei-Fang

2009-01-01

To develop a theoretical, functional model of community navigation for individuals with cognitive impairments: the Activities of Community Transportation (ACTs). Iterative design using qualitative methods (i.e. document review, focus groups and observations). Four agencies providing travel training to adults with cognitive impairments in the USA participated in the validation study. A thorough document review and series of focus groups led to the development of a comprehensive model (ACTs Wheels) delineating the requisite steps and skills for community navigation. The model was validated and updated based on observations of 395 actual trips by travellers with navigational challenges from the four participating agencies. Results revealed that the 'ACTs Wheel' models were complete and comprehensive. The 'ACTs Wheels' represent a comprehensive model of the steps needed to navigate to destinations using paratransit and fixed-route public transportation systems for travellers with cognitive impairments. Suggestions are made for future investigations of community transportation for this population.

Developing drugs for treatment of atopic dermatitis in children (≥3 months to <18 years of age): Draft guidance for industry.

PubMed

Siegfried, Elaine C; Jaworski, Jennifer C; Eichenfield, Lawrence F; Paller, Amy; Hebert, Adelaide A; Simpson, Eric L; Altman, Emily; Arena, Charles; Blauvelt, Andrew; Block, Julie; Boguniewicz, Mark; Chen, Suephy; Cordoro, Kelly; Hanna, Diane; Horii, Kimberly; Hultsch, Thomas; Lee, James; Leung, Donald Y; Lio, Peter; Milner, Joshua; Omachi, Theodore; Schneider, Christine; Schneider, Lynda; Sidbury, Robert; Smith, Timothy; Sugarman, Jeffrey; Taha, Sharif; Tofte, Susan; Tollefson, Megha; Tom, Wynnis L; West, Dennis P; Whitney, Lucinda; Zane, Lee

2018-05-01

Atopic dermatitis is the most common chronic skin disease, and it primarily affects children. Although atopic dermatitis (AD) has the highest effect on burden of skin disease, no high-level studies have defined optimal therapy for severe disease. Corticosteroids have been used to treat AD since the 1950s and remain the only systemic medication with Food and Drug Administration approval for this indication in children, despite published guidelines of care that recommend against this option. Several clinical trials with level 1 evidence have supported the use of topical treatments for mild to moderate atopic dermatitis in adults and children, but these trials have had little consistency in protocol design. Consensus recommendations will help standardize clinical development and trial design for children. The Food and Drug Administration issues guidance documents for industry as a source for "the Agency's current thinking on a particular subject." Although they are nonbinding, industry considers these documents to be the standard for clinical development and trial design. Our consensus group is the first to specifically address clinical trial design in this population. We developed a draft guidance document for industry, Developing Drugs for Treatment of Atopic Dermatitis in Children (≥3 months to <18 years of age). This draft guidance has been submitted to the Food and Drug Administration based on a provision in the Federal Register (Good Guidance Practices). © 2018 Wiley Periodicals, Inc.

Spectrum analysis on quality requirements consideration in software design documents.

PubMed

Kaiya, Haruhiko; Umemura, Masahiro; Ogata, Shinpei; Kaijiri, Kenji

2013-12-01

Software quality requirements defined in the requirements analysis stage should be implemented in the final products, such as source codes and system deployment. To guarantee this meta-requirement, quality requirements should be considered in the intermediate stages, such as the design stage or the architectural definition stage. We propose a novel method for checking whether quality requirements are considered in the design stage. In this method, a technique called "spectrum analysis for quality requirements" is applied not only to requirements specifications but also to design documents. The technique enables us to derive the spectrum of a document, and quality requirements considerations in the document are numerically represented in the spectrum. We can thus objectively identify whether the considerations of quality requirements in a requirements document are adapted to its design document. To validate the method, we applied it to commercial software systems with the help of a supporting tool, and we confirmed that the method worked well.

Development and Implementation of Clinical Trial Protocol Templates at the National Institute of Allergy and Infectious Diseases

PubMed Central

Bridge, Heather; Smolskis, Mary; Bianchine, Peter; Dixon, Dennis O.; Kelly, Grace; Herpin, Betsey; Tavel, Jorge

2009-01-01

Background: A clinical research protocol document must reflect both sound scientific rationale as well as local, national and, when applicable, international regulatory and human subject protections requirements. These requirements originate from a variety of sources, undergo frequent revision and are subject to interpretation. Tools to assist clinical investigators in the production of clinical protocols could facilitate navigating these requirements and ultimately increase the efficiency of clinical research. Purpose: The National Institute of Allergy and Infectious Diseases (NIAID) developed templates for investigators to serve as the foundation for protocol development. These protocol templates are designed as tools to support investigators in developing clinical protocols. Methods: NIAID established a series of working groups to determine how to improve its capacity to conduct clinical research more efficiently and effectively. The Protocol Template Working Group was convened to determine what protocol templates currently existed within NIAID and whether standard NIAID protocol templates should be produced. After review and assessment of existing protocol documents and requirements, the group reached consensus about required and optional content, determined the format and identified methods for distribution as well as education of investigators in the use of these templates. Results: The templates were approved by the NIAID Executive Committee in 2006 and posted as part of the NIAID Clinical Research Toolkit[1]website for broad access. These documents require scheduled revisions to stay current with regulatory and policy changes. Limitations: The structure of any clinical protocol template, whether comprehensive or specific to a particular study phase, setting or design, affects how it is used by investigators. Each structure presents its own set of advantages and disadvantages. While useful, protocol templates are not stand-alone tools for creating an optimal protocol document but must be complemented by institutional resources and support. Education and guidance of investigators in the appropriate use of templates is necessary to ensure a complete yet concise protocol document. Due to changing regulatory requirements, clinical protocol templates cannot become static but require frequent revisions. Conclusions: Standard protocol templates that meet applicable regulations can be important tools to assist investigators in the effective conduct of clinical research, but they require dedicated resources and ongoing input from key stakeholders. PMID:19625326

TransGuide : model deployment initiative design report

DOT National Transportation Integrated Search

1998-09-01

This report documents the high-level design of the TransGuide MDI project and discusses the design trade-off decisions. A detailed, specific project level design is provided in each projects System Design document.

Spacelab payload accommodation handbook. Main volume

NASA Technical Reports Server (NTRS)

1978-01-01

The main characteristics of the Spacelab system are described to enable individual experimenters or payload planning groups to determine how their payload equipment can be accommodated by Spacelab. Spacelab/experiment interfaces, Spacelab payload support systems and requirements that the experiments have to comply with are described to allow experiment design and development. The basic operational aspects are outlined as far as they have an impact on experiment design. The relationship of the Spacelab Payload Accommodation Handbook to Space Transportation System documentation is outlined. Data concerning the space shuttle system are briefly described.

Warfighting Concepts to Future Weapon System Designs (WARCON)

DTIC Science & Technology

2003-09-12

34* Software design documents rise to litigation. "* A Material List "Cost information that may support, or may * Final Engineering Process Maps be...document may include design the system as derived from the engineering design, software development, SRD. MTS Technologies, Inc. 26 FOR OFFICIAL USE...document, early in the development phase. It is software engineers produce the vision of important to establish a standard, formal the design effort. As

Are Sexual and Reproductive Health Policies Designed for All? Vulnerable Groups in Policy Documents of Four European Countries and Their Involvement in Policy Development

PubMed Central

Ivanova, Olena; Dræbel, Tania; Tellier, Siri

2015-01-01

Background: Health policies are important instruments for improving population health. However, experience suggests that policies designed for the whole population do not always benefit the most vulnerable. Participation of vulnerable groups in the policy-making process provides an opportunity for them to influence decisions related to their health, and also to exercise their rights. This paper presents the findings from a study that explored how vulnerable groups and principles of human rights are incorporated into national sexual and reproductive health (SRH) policies of 4 selected countries (Spain, Scotland, Republic of Moldova, and Ukraine). It also aimed at discussing the involvement of vulnerable groups in SRH policy development from the perspective of policy-makers. Methods: Literature review, health policy analysis and 5 semi-structured interviews with policy-makers were carried out in this study. Content analysis of SRH policies was performed using the EquiFrame analytical framework. Results: The study revealed that vulnerable groups and core principles of human rights are differently addressed in SRH policies within 4 studied countries. The opinions of policy-makers on the importance of mentioning vulnerable groups in policy documents and the way they ought to be mentioned varied, but they agreed that a clear definition of vulnerability, practical examples, and evidences on health status of these groups have to be included. In addition, different approaches to vulnerable group’s involvement in policy development were identified during the interviews and the range of obstacles to this process was discussed by respondents. Conclusion: Incorporation of vulnerable groups in the SRH policies and their involvement in policy development were found to be important in addressing SRH of these groups and providing an opportunity for them to advocate for equal access to healthcare and exercise their rights. Future research on this topic should include representatives of vulnerable communities which could help to build a dialogue and present the problem from multiple perspectives. PMID:26673176

Evaluating a Clinical Decision Support Interface for End-of-Life Nurse Care.

PubMed

Febretti, Alessandro; Stifter, Janet; Keenan, Gail M; Lopez, Karen D; Johnson, Andrew; Wilkie, Diana J

2014-01-01

Clinical Decision Support Systems (CDSS) are tools that assist healthcare personnel in the decision-making process for patient care. Although CDSSs have been successfully deployed in the clinical setting to assist physicians, few CDSS have been targeted at professional nurses, the largest group of health providers. We present our experience in designing and testing a CDSS interface embedded within a nurse care planning and documentation tool. We developed four prototypes based on different CDSS feature designs, and tested them in simulated end-of-life patient handoff sessions with a group of 40 nurse clinicians. We show how our prototypes directed nurses towards an optimal care decision that was rarely performed in unassisted practice. We also discuss the effect of CDSS layout and interface navigation in a nurse's acceptance of suggested actions. These findings provide insights into effective nursing CDSS design that are generalizable to care scenarios different than end-of-life.

CodeSlinger: a case study in domain-driven interactive tool design for biomedical coding scheme exploration and use.

PubMed

Flowers, Natalie L

2010-01-01

CodeSlinger is a desktop application that was developed to aid medical professionals in the intertranslation, exploration, and use of biomedical coding schemes. The application was designed to provide a highly intuitive, easy-to-use interface that simplifies a complex business problem: a set of time-consuming, laborious tasks that were regularly performed by a group of medical professionals involving manually searching coding books, searching the Internet, and checking documentation references. A workplace observation session with a target user revealed the details of the current process and a clear understanding of the business goals of the target user group. These goals drove the design of the application's interface, which centers on searches for medical conditions and displays the codes found in the application's database that represent those conditions. The interface also allows the exploration of complex conceptual relationships across multiple coding schemes.

Using Gestalt Theory to Teach Document Design and Graphics.

ERIC Educational Resources Information Center

Moore, Patrick; Fitz, Chad

1993-01-01

Presents a brief overview of Gestalt theory. Discusses and illustrates six key principles of Gestalt psychology as they apply to document design and graphics. Presents exercise that students may use to improve their understanding of the principles and develop their document design skills. Distinguishes between Gestalt theory and rhetoric. (RS)

Documenting the Engineering Design Process

ERIC Educational Resources Information Center

Hollers, Brent

2017-01-01

Documentation of ideas and the engineering design process is a critical, daily component of a professional engineer's job. While patent protection is often cited as the primary rationale for documentation, it can also benefit the engineer, the team, company, and stakeholders through creating a more rigorously designed and purposeful solution.…

28 CFR 0.180 - Documents designated as orders.

Code of Federal Regulations, 2010 CFR

2010-07-01

... Orders of the Attorney General § 0.180 Documents designated as orders. All documents relating to the... by the Attorney General or to general departmental policy shall be designated as orders and shall be issued only by the Attorney General in a separate, numbered series. Classified orders shall be identified...

HATS: A Design Procedure for Routine Business Documents.

ERIC Educational Resources Information Center

Baker, William H.

2001-01-01

Describes an approach to teaching students a basic design process for routine business documents like memos, letters, and reports. Outlines the design principles of HATS (Headings, Access, Typography, and Spacing), how they apply in before-and-after fashion to various documents, and discusses an assignment in which students redesign an existing…

Using Design Principles to Teach Technical Communication.

ERIC Educational Resources Information Center

Markel, Mike

1995-01-01

Compares the writing of two students--a competent writer and a weak one--in a technical communication course before and after discussion of design principles. Finds that a basic understanding of design principles helped them improve document macrostructure but had little effect on document microstructure. Suggests that integrating document design…

Software Design Document SAF Workstation. Volume 1, Sections 1.0 - 2.4. 3.4.86

DTIC Science & Technology

1991-06-01

SLECT TERMS IS. NUMER OF PAGES SIMNET Software Design Document for the SAF Workstation CSCI (CSCI 6). 14. PRICE CODE SECUWItY CLASSIFICATION Is. SECUJRITY...AD-A244 972 SOFTWARE DESIGN DOCUMENT SAF Workstation CSCI (6) Volume 1 of 2 Sections 1.0 - 2.4.3.4.86 DTIC June, 1991 Flt. FCTE S JAN 09 1992...00247 APPROVED FOR PUBLIC RELEASE DISTRBUTION UNLIMITED -Mono SOFTWARE DESIGN DOCUMENT SAF Workstation CSCI (6) Volume 1 of 2 Sections 1.0 - 2.4.3.4.86

Information Management Platform for Data Analytics and Aggregation (IMPALA) System Design Document

NASA Technical Reports Server (NTRS)

Carnell, Andrew; Akinyelu, Akinyele

2016-01-01

The System Design document tracks the design activities that are performed to guide the integration, installation, verification, and acceptance testing of the IMPALA Platform. The inputs to the design document are derived from the activities recorded in Tasks 1 through 6 of the Statement of Work (SOW), with the proposed technical solution being the completion of Phase 1-A. With the documentation of the architecture of the IMPALA Platform and the installation steps taken, the SDD will be a living document, capturing the details about capability enhancements and system improvements to the IMPALA Platform to provide users in development of accurate and precise analytical models. The IMPALA Platform infrastructure team, data architecture team, system integration team, security management team, project manager, NASA data scientists and users are the intended audience of this document. The IMPALA Platform is an assembly of commercial-off-the-shelf (COTS) products installed on an Apache-Hadoop platform. User interface details for the COTS products will be sourced from the COTS tools vendor documentation. The SDD is a focused explanation of the inputs, design steps, and projected outcomes of every design activity for the IMPALA Platform through installation and validation.

76 FR 8353 - Positioning Systems Directorate Will Be Hosting an Interface Control Working Group (ICWG) Meeting...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-02-14

... an Interface Control Working Group (ICWG) Meeting for Document ICD-GPS-870 AGENCY: Interface Control Working Group (ICWG) meeting for document ICD-GPS-870. ACTION: Meeting Notice. SUMMARY: This notice... Working Group (ICWG) meeting for document ICD-GPS-870, Navstar Next Generation GPS Operational Control...

Description and Evaluation of a Four-Channel, Coherent 100-kHz Sidescan Sonar

DTIC Science & Technology

2004-12-01

document contains color images. 14. ABSTRACT This report documents the design and features of a new, four-channel, coherent 100-kHz sidescan sonar...Atlantic Technical Memorandum DRDC Atlantic TM 2004-204 December 2004 Abstract This report documents the design and features of a new...Results This report documents the design and features of this new high-frequency sonar system. These initial field trial results demonstrate some of

Semantic annotation of Web data applied to risk in food.

PubMed

Hignette, Gaëlle; Buche, Patrice; Couvert, Olivier; Dibie-Barthélemy, Juliette; Doussot, David; Haemmerlé, Ollivier; Mettler, Eric; Soler, Lydie

2008-11-30

A preliminary step to risk in food assessment is the gathering of experimental data. In the framework of the Sym'Previus project (http://www.symprevius.org), a complete data integration system has been designed, grouping data provided by industrial partners and data extracted from papers published in the main scientific journals of the domain. Those data have been classified by means of a predefined vocabulary, called ontology. Our aim is to complement the database with data extracted from the Web. In the framework of the WebContent project (www.webcontent.fr), we have designed a semi-automatic acquisition tool, called @WEB, which retrieves scientific documents from the Web. During the @WEB process, data tables are extracted from the documents and then annotated with the ontology. We focus on the data tables as they contain, in general, a synthesis of data published in the documents. In this paper, we explain how the columns of the data tables are automatically annotated with data types of the ontology and how the relations represented by the table are recognised. We also give the results of our experimentation to assess the quality of such an annotation.

Guidelines for Document Designers.

ERIC Educational Resources Information Center

Felker, Daniel B.; And Others

Intended to improve the quality of public documents by making them clearer to the people who use them, this book contains document design principles concerned with writing documents that are visually distinct, attractive, and easily understood. Following an introduction, the major portion of the book presents the 25 principles, each of which…

The Third Reich in Perspective: A Resource Unit for Teachers and Group Leaders.

ERIC Educational Resources Information Center

B'nai B'rith, New York, NY. Anti-Defamation League.

A brief history of the Nazi rise to power and genocide of Jews is contained in this pamphlet. The pamphlet was designed to supplement secondary social studies textbooks when it was found that most texts omit or skim over the treatment of the Jews by the Nazis. The document begins with a brief overview of historical content which the developers…

A Case Study of the In-Class Use of a Video Game for Teaching High School History

ERIC Educational Resources Information Center

Watson, William R.; Mong, Christopher J.; Harris, Constance A.

2011-01-01

This study examines the case of a sophomore high school history class where "Making History", a video game designed with educational purposes in mind, is used in the classroom to teach about World War II. Data was gathered using observation, focus group and individual interviews, and document analysis. The high school was a rural school…

Neuropilin-2: Novel Biomarker and Therapeutic Target for Aggressive Prostate Cancer

DTIC Science & Technology

2013-09-01

pathways GLI1 BMI1 Perivascular niche Oncogenic stimuli Self- renewal Polycomb group Proteins that were first described in Drosophila melanogaster ...Distribution Unlimited The views, opinions and/or findings contained in this report are those of the author...s) and should not be construed as an official Department of the Army position, policy or decision unless so designated by other documentation

Space shuttle orbiter guidance, naviagation and control software functional requirements: Horizontal flight operations

NASA Technical Reports Server (NTRS)

1972-01-01

The shuttle GN&C software functions for horizontal flight operations are defined. Software functional requirements are grouped into two categories: first horizontal flight requirements and full mission horizontal flight requirements. The document privides the intial step in the shuttle GN&C software design process. It also serves as a management tool to identify analyses which are required to define requirements.

Canonical Pedagogical Content Knowledge by Cores for Teaching Acid-Base Chemistry at High School

ERIC Educational Resources Information Center

Alvarado, Clara; Cañada, Florentina; Garritz, Andoni; Mellado, Vicente

2015-01-01

The topic of acid-base chemistry is one of the oldest in general chemistry courses and it has been almost continuously in academic discussion. The central purpose of documenting the knowledge and beliefs of a group of ten Mexican teachers with experience in teaching acid-base chemistry in high school was to know how they design, prepare and…

Science in the Learning Gardens (SciLG): A Study of Students' Motivation, Achievement, and Science Identity in Low-Income Middle Schools

ERIC Educational Resources Information Center

Williams, Dilafruz R.; Brule, Heather; Kelley, Sybil S.; Skinner, Ellen A.

2018-01-01

Background: Science in the Learning Gardens (henceforth, SciLG) program was designed to address two well-documented, inter-related educational problems: under-representation in science of students from racial and ethnic minority groups and inadequacies of curriculum and pedagogy to address their cultural and motivational needs. Funded by the…

The State of the Child [in] Illinois, 2000. A Chapin Hall Report.

ERIC Educational Resources Information Center

Chicago Univ., IL. Chapin Hall Center for Children.

This report is the third to document the condition of children in the state of Illinois and the performance of the policies and programs designed to serve them over the past decade. One of the main themes emerging from the findings is the increasing diversity of the Illinois child population, in terms of both racial and ethnic groups and the…

Structure and Properties of Energetic Materials

DTIC Science & Technology

1992-12-02

basic research is needed. First, a quantitative study of friction effects on propellants with varying particle sizes can be conducted. Second, using...Army position, policy, or decision, unless so designated by other documentation. Mat. Res. Soc. Symp. Proc. Vol. 296. t 1993 Materials Research Society...further observations and analysis. INTRODUCTION Recently, a study group sponsored by the Army Research Office developed and published an overall basic

The Energy Industry Profile of ISO/DIS 19115-1: Facilitating Discovery and Evaluation of, and Access to Distributed Information Resources

NASA Astrophysics Data System (ADS)

Hills, S. J.; Richard, S. M.; Doniger, A.; Danko, D. M.; Derenthal, L.; Energistics Metadata Work Group

2011-12-01

A diverse group of organizations representative of the international community involved in disciplines relevant to the upstream petroleum industry, - energy companies, - suppliers and publishers of information to the energy industry, - vendors of software applications used by the industry, - partner government and academic organizations, has engaged in the Energy Industry Metadata Standards Initiative. This Initiative envisions the use of standard metadata within the community to enable significant improvements in the efficiency with which users discover, evaluate, and access distributed information resources. The metadata standard needed to realize this vision is the initiative's primary deliverable. In addition to developing the metadata standard, the initiative is promoting its adoption to accelerate realization of the vision, and publishing metadata exemplars conformant with the standard. Implementation of the standard by community members, in the form of published metadata which document the information resources each organization manages, will allow use of tools requiring consistent metadata for efficient discovery and evaluation of, and access to, information resources. While metadata are expected to be widely accessible, access to associated information resources may be more constrained. The initiative is being conducting by Energistics' Metadata Work Group, in collaboration with the USGIN Project. Energistics is a global standards group in the oil and natural gas industry. The Work Group determined early in the initiative, based on input solicited from 40+ organizations and on an assessment of existing metadata standards, to develop the target metadata standard as a profile of a revised version of ISO 19115, formally the "Energy Industry Profile of ISO/DIS 19115-1 v1.0" (EIP). The Work Group is participating on the ISO/TC 211 project team responsible for the revision of ISO 19115, now ready for "Draft International Standard" (DIS) status. With ISO 19115 an established, capability-rich, open standard for geographic metadata, EIP v1 is expected to be widely acceptable within the community and readily sustainable over the long-term. The EIP design, also per community requirements, will enable discovery, evaluation, and access to types of information resources considered important to the community, including structured and unstructured digital resources, and physical assets such as hardcopy documents and material samples. This presentation will briefly review the development of this initiative as well as the current and planned Work Group activities. More time will be spent providing an overview of the EIP v1, including the requirements it prescribes, design efforts made to enable automated metadata capture and processing, and the structure and content of its documentation, which was written to minimize ambiguity and facilitate implementation. The Work Group considers EIP v1 a solid initial design for interoperable metadata, and first step toward the vision of the Initiative.

The impact of electronic health records on time efficiency of physicians and nurses: a systematic review.

PubMed

Poissant, Lise; Pereira, Jennifer; Tamblyn, Robyn; Kawasumi, Yuko

2005-01-01

A systematic review of the literature was performed to examine the impact of electronic health records (EHRs) on documentation time of physicians and nurses and to identify factors that may explain efficiency differences across studies. In total, 23 papers met our inclusion criteria; five were randomized controlled trials, six were posttest control studies, and 12 were one-group pretest-posttest designs. Most studies (58%) collected data using a time and motion methodology in comparison to work sampling (33%) and self-report/survey methods (8%). A weighted average approach was used to combine results from the studies. The use of bedside terminals and central station desktops saved nurses, respectively, 24.5% and 23.5% of their overall time spent documenting during a shift. Using bedside or point-of-care systems increased documentation time of physicians by 17.5%. In comparison, the use of central station desktops for computerized provider order entry (CPOE) was found to be inefficient, increasing the work time from 98.1% to 328.6% of physician's time per working shift (weighted average of CPOE-oriented studies, 238.4%). Studies that conducted their evaluation process relatively soon after implementation of the EHR tended to demonstrate a reduction in documentation time in comparison to the increases observed with those that had a longer time period between implementation and the evaluation process. This review highlighted that a goal of decreased documentation time in an EHR project is not likely to be realized. It also identified how the selection of bedside or central station desktop EHRs may influence documentation time for the two main user groups, physicians and nurses.

The Impact of Electronic Health Records on Time Efficiency of Physicians and Nurses: A Systematic Review

PubMed Central

Poissant, Lise; Pereira, Jennifer; Tamblyn, Robyn; Kawasumi, Yuko

2005-01-01

A systematic review of the literature was performed to examine the impact of electronic health records (EHRs) on documentation time of physicians and nurses and to identify factors that may explain efficiency differences across studies. In total, 23 papers met our inclusion criteria; five were randomized controlled trials, six were posttest control studies, and 12 were one-group pretest-posttest designs. Most studies (58%) collected data using a time and motion methodology in comparison to work sampling (33%) and self-report/survey methods (8%). A weighted average approach was used to combine results from the studies. The use of bedside terminals and central station desktops saved nurses, respectively, 24.5% and 23.5% of their overall time spent documenting during a shift. Using bedside or point-of-care systems increased documentation time of physicians by 17.5%. In comparison, the use of central station desktops for computerized provider order entry (CPOE) was found to be inefficient, increasing the work time from 98.1% to 328.6% of physician's time per working shift (weighted average of CPOE-oriented studies, 238.4%). Studies that conducted their evaluation process relatively soon after implementation of the EHR tended to demonstrate a reduction in documentation time in comparison to the increases observed with those that had a longer time period between implementation and the evaluation process. This review highlighted that a goal of decreased documentation time in an EHR project is not likely to be realized. It also identified how the selection of bedside or central station desktop EHRs may influence documentation time for the two main user groups, physicians and nurses. PMID:15905487

Monitored Geologic Repository Project Description Document

DOE Office of Scientific and Technical Information (OSTI.GOV)

P. M. Curry

2001-01-30

The primary objective of the Monitored Geologic Repository Project Description Document (PDD) is to allocate the functions, requirements, and assumptions to the systems at Level 5 of the Civilian Radioactive Waste Management System (CRWMS) architecture identified in Section 4. It provides traceability of the requirements to those contained in Section 3 of the ''Monitored Geologic Repository Requirements Document'' (MGR RD) (YMP 2000a) and other higher-level requirements documents. In addition, the PDD allocates design related assumptions to work products of non-design organizations. The document provides Monitored Geologic Repository (MGR) technical requirements in support of design and performance assessment in preparing formore » the Site Recommendation (SR) and License Application (LA) milestones. The technical requirements documented in the PDD are to be captured in the System Description Documents (SDDs) which address each of the systems at Level 5 of the CRWMS architecture. The design engineers obtain the technical requirements from the SDDs and by reference from the SDDs to the PDD. The design organizations and other organizations will obtain design related assumptions directly from the PDD. These organizations may establish additional assumptions for their individual activities, but such assumptions are not to conflict with the assumptions in the PDD. The PDD will serve as the primary link between the technical requirements captured in the SDDs and the design requirements captured in US Department of Energy (DOE) documents. The approved PDD is placed under Level 3 baseline control by the CRWMS Management and Operating Contractor (M and O) and the following portions of the PDD constitute the Technical Design Baseline for the MGR: the design characteristics listed in Table 1-1, the MGR Architecture (Section 4.1), the Technical Requirements (Section 5), and the Controlled Project Assumptions (Section 6).« less

ModSAF Software Architecture Design and Overview Document

DTIC Science & Technology

1993-12-20

ADVANCED DISTRIBUTED SIMULATIONTECHNOLOGY AD-A282 740 ModSAF SOFTWARE ARCHITECTURE DESIGN AND OVERVIEW DOCUMENT Ver 1.0 - 20 December 1993 D T...AND SUBTITLE 5. FUNDING NUMBERS MOdSAF SOFTWARE ARCHITECTURE DESIGN AND OVERVIEW DOCUMENT C N61339-91-D-O00, Delivery Order (0021), ModSAF (CDRL A004) 6

The Effect of Intravenous Infiltration Management Program for Hospitalized Children.

PubMed

Park, Soon Mi; Jeong, Ihn Sook; Kim, Kyoung Lae; Park, Kyung Ju; Jung, Moon Ju; Jun, Seong Suk

2016-01-01

This study aimed to identify the effect of IV infiltration management program among hospitalized children. This was a quasi-experimental study with history comparison group design with 2,894 catheters inserted during 3 months comparison phase and 3,651 catheters inserted during 4 months experimental phase. The intervention was composed of seven activities including applying poster, documentation of catheter insertion, parents education, making infiltration report, assessment of vein condition before inserting catheter, appropriate site selection, and documentation of catheter insertion, and assessment of peripheral catheter insertion site every shift. Data were analyzed using of X2-test, Fisher's exact test. The infiltration incidence rate was 0.9% for experimental group and 4.4% for comparison group, which was significantly different (x2=80.42, p<.001). The catheter maintenance period (p=.035) and infiltration state (p=.039) were significantly different among participants with infiltration between comparison and experimental groups. IV Infiltration management program was founded to be effective in reducing the IV infiltration incidence rate and increasing early detection of IV infiltration. Considering the effect of IV Infiltration management program, we recommend that this infiltration management program would be widely used in the clinical settings. Copyright © 2016 Elsevier Inc. All rights reserved.

Consumer involvement in cancer research: example from a Cancer Network.

PubMed

Arain, Mubashir; Pyne, Sarah; Thornton, Nigel; Palmer, Susan; Sharma, Ricky A

2015-10-01

The involvement of consumers and the general public in improving cancer services is an important component of health services. However, consumer involvement in cancer research is relatively unexplored. The objective of this study was to explore different ways of involving consumers in cancer research in one regional network. Thames Valley Cancer Network Consumer Research Partnership (CRP) group was formed in 2009. The group consists of consumers and professionals to help in promoting consumer involvement in Cancer Research in the Thames Valley. This study evaluated the project of consumer involvement in cancer research in the Thames Valley from March 2010 to March 2011. We used different indices to judge the level of consumer involvement: number of projects involving consumers through the group, types of projects, level of involvement (ranged from consultation on research documents to collaborating in preparing grant applications) and the methods of involving consumers in cancer research. Fifteen projects were submitted to the CRP group during the 12-month period studied. Of these, eight projects were clinical trials, three were qualitative research projects, two were patients' surveys and two were non-randomized interventional studies. Seven projects requested consumer involvement on patient information sheets for clinical trials. Of these seven applications, three also requested consumers' help in designing research questionnaires and another three requested that consumers should be involved in their project management group. In addition, four projects involved consumers in the proposal development phase and another four projects asked for advice on how to increase trial recruitment, conduct patient interviews or help with grant applications. The creation of the CRP and this audit of its activity have documented consumer involvement in cancer research in the Thames Valley. We have clearly shown that consumers can be involved in designing and managing cancer research projects. © 2013 John Wiley & Sons Ltd.

Design criteria for the light duty utility arm system end effectors

DOE Office of Scientific and Technical Information (OSTI.GOV)

Pardini, A.F.; Kiebel, G.R.

1995-12-01

The purpose of this document is to provide criteria for the design of end effectors that will be used as part of the Light Duty Utility Arm (LDUA) System. Actual component design, fabrication, testing, and inspection will be performed by various DOE laboratories, industry, and academia. This document augments WHC-SD-TD-FRD-003, `Functions and Requirements for the Light Duty Utility Arm Integrated System` (F). All requirements dictated in the F shall also be applicable in this document. Whenever conflicts arise between this document and the F, this document shall take precedence.

The reliability and validity of a designed setup for the assessment of static back extensor force and endurance in older women with and without hyperkyphosis.

PubMed

Roghani, Taybeh; Khalkhali Zavieh, Minoo; Rahimi, Abbas; Talebian, Saeed; Manshadi, Farideh Dehghan; Akbarzadeh Baghban, Alireza; King, Nicole; Katzman, Wendy

2018-01-25

The purpose of this study was to investigate the intra-rater reliability and validity of a designed load cell setup for the measurement of back extensor muscle force and endurance. The study sample included 19 older women with hyperkyphosis, mean age 67.0 ± 5.0 years, and 14 older women without hyperkyphosis, mean age 63.0 ± 6.0 years. Maximum back extensor force and endurance were measured in a sitting position with a designed load cell setup. Tests were performed by the same examiner on two separate days within a 72-hour interval. The intra-rater reliability of the measurements was analyzed using intraclass correlation coefficient (ICC), standard errors of measurement (SEM), and minimal detectable change (MDC). The validity of the setup was determined using Pearson correlation analysis and independent t-test. Using our designed load cell, the values of ICC indicated very high reliability of force measurement (hyperkyphosis group: 0.96, normal group: 0.97) and high reliability of endurance measurement (hyperkyphosis group: 0.82, normal group: 0.89). For all tests, the values of SEM and MDC were low in both groups. A significant correlation between two documented forces (load cell force and target force) and significant differences in the muscle force and endurance among the two groups were found. The measurements of static back muscle force and endurance are reliable and valid with our designed setup in older women with and without hyperkyphosis.

Design Package for Fuel Retrieval System Fuel Handling Tool Modification

DOE Office of Scientific and Technical Information (OSTI.GOV)

TEDESCHI, D.J.

This design package documents design, fabrication, and testing of new stinger tool design. Future revisions will document further development of the stinger tool and incorporate various developmental stages, and final test results.

Concurrent Engineering Working Group White Paper Distributed Collaborative Design: The Next Step in Aerospace Concurrent Engineering

NASA Technical Reports Server (NTRS)

Hihn, Jairus; Chattopadhyay, Debarati; Karpati, Gabriel; McGuire, Melissa; Panek, John; Warfield, Keith; Borden, Chester

2011-01-01

As aerospace missions grow larger and more technically complex in the face of ever tighter budgets, it will become increasingly important to use concurrent engineering methods in the development of early conceptual designs because of their ability to facilitate rapid assessments and trades of performance, cost and schedule. To successfully accomplish these complex missions with limited funding, it is essential to effectively leverage the strengths of individuals and teams across government, industry, academia, and international agencies by increased cooperation between organizations. As a result, the existing concurrent engineering teams will need to increasingly engage in distributed collaborative concurrent design. The purpose of this white paper is to identify a near-term vision for the future of distributed collaborative concurrent engineering design for aerospace missions as well as discuss the challenges to achieving that vision. The white paper also documents the advantages of creating a working group to investigate how to engage the expertise of different teams in joint design sessions while enabling organizations to maintain their organizations competitive advantage.

System design document for the INFLO prototype.

DOT National Transportation Integrated Search

2014-03-01

This report documents the high level System Design Document (SDD) for the prototype development and demonstration of the Intelligent Network Flow Optimization (INFLO) application bundle, with a focus on the Speed Harmonization (SPD-HARM) and Queue Wa...

42 CFR 137.361 - Does the Secretary have any other opportunities to approve planning or design documents prepared...

Code of Federal Regulations, 2010 CFR

2010-10-01

... approve planning or design documents prepared by the Self-Governance Tribe? 137.361 Section 137.361 Public... OF HEALTH AND HUMAN SERVICES TRIBAL SELF-GOVERNANCE Construction Roles of the Secretary in... opportunities to approve planning or design documents prepared by the Self-Governance Tribe? Yes, but only if...

Phase II Report: Design Study for Automated Document Location and Control System.

ERIC Educational Resources Information Center

Booz, Allen Applied Research, Inc., Bethesda, MD.

The scope of Phase II is the design of a system for document control within the National Agricultural Library (NAL) that will facilitate the processing of the documents selected, ordered, or received; that will avoid backlogs; and that will provide rapid document location reports. The results are set forth as follows: Chapter I, Introduction,…

A Visible Ideology: A Document Series in a Women's Clothing Company.

ERIC Educational Resources Information Center

Cronn-Mills, Kirstin

2000-01-01

Notes that corporate documents of a women's clothing company changed in one season from relatively outdated designs to more updated, professional layouts but the content changed very little. Contends that the document redesign indicates a move to a more feminist outlook for the company. Describes how the document design represents a slow change…

An electronic regulatory document management system for a clinical trial network.

PubMed

Zhao, Wenle; Durkalski, Valerie; Pauls, Keith; Dillon, Catherine; Kim, Jaemyung; Kolk, Deneil; Silbergleit, Robert; Stevenson, Valerie; Palesch, Yuko

2010-01-01

A computerized regulatory document management system has been developed as a module in a comprehensive Clinical Trial Management System (CTMS) designed for an NIH-funded clinical trial network in order to more efficiently manage and track regulatory compliance. Within the network, several institutions and investigators are involved in multiple trials, and each trial has regulatory document requirements. Some of these documents are trial specific while others apply across multiple trials. The latter causes a possible redundancy in document collection and management. To address these and other related challenges, a central regulatory document management system was designed. This manuscript shares the design of the system as well as examples of it use in current studies. Copyright (c) 2009 Elsevier Inc. All rights reserved.

Are Infants' Theory-of-Mind Abilities Well Integrated? Implicit Understanding of Intentions, Desires, and Beliefs

ERIC Educational Resources Information Center

Yott, Jessica; Poulin-Dubois, Diane

2016-01-01

The development of theory of mind (ToM) in infancy has been mainly documented through studies conducted on a single age group with a single task. Very few studies have examined ToM abilities other than false belief, and very few studies have used a within-subjects design. During 2 testing sessions, infants aged 14 and 18 months old were…

A Cross-Validation of easyCBM Mathematics Cut Scores in Washington State: 2009-2010 Test. Technical Report #1105

ERIC Educational Resources Information Center

Anderson, Daniel; Alonzo, Julie; Tindal, Gerald

2011-01-01

In this technical report, we document the results of a cross-validation study designed to identify optimal cut-scores for the use of the easyCBM[R] mathematics test in the state of Washington. A large sample, randomly split into two groups of roughly equal size, was used for this study. Students' performance classification on the Washington state…

A Cross-Validation of easyCBM[R] Mathematics Cut Scores in Oregon: 2009-2010. Technical Report #1104

ERIC Educational Resources Information Center

Anderson, Daniel; Alonzo, Julie; Tindal, Gerald

2011-01-01

In this technical report, we document the results of a cross-validation study designed to identify optimal cut-scores for the use of the easyCBM[R] mathematics test in Oregon. A large sample, randomly split into two groups of roughly equal size, was used for this study. Students' performance classification on the Oregon state test was used as the…

An Analysis of Business Professors' and Their Students' Perceptions of Excellence in Teaching at a Business School-Empirical Evidence from New England

ERIC Educational Resources Information Center

Anim, Stephen Kwasi

2017-01-01

This qualitative study used evidence gleaned from business professors and their students and compared it with the Measure of Effective Teaching model (MET, 2013). The research is based on a qualitative research design with the aim of collecting data from multiple sources such as interviews, focus group, document analysis and observation to develop…

Guidelines for the Design and Conduct of Clinical Studies in Knee Articular Cartilage Repair

PubMed Central

Mithoefer, Kai; Saris, Daniel B.F.; Farr, Jack; Kon, Elizaveta; Zaslav, Kenneth; Cole, Brian J.; Ranstam, Jonas; Yao, Jian; Shive, Matthew; Levine, David; Dalemans, Wilfried; Brittberg, Mats

2011-01-01

Objective: To summarize current clinical research practice and develop methodological standards for objective scientific evaluation of knee cartilage repair procedures and products. Design: A comprehensive literature review was performed of high-level original studies providing information relevant for the design of clinical studies on articular cartilage repair in the knee. Analysis of cartilage repair publications and synopses of ongoing trials were used to identify important criteria for the design, reporting, and interpretation of studies in this field. Results: Current literature reflects the methodological limitations of the scientific evidence available for articular cartilage repair. However, clinical trial databases of ongoing trials document a trend suggesting improved study designs and clinical evaluation methodology. Based on the current scientific information and standards of clinical care, detailed methodological recommendations were developed for the statistical study design, patient recruitment, control group considerations, study endpoint definition, documentation of results, use of validated patient-reported outcome instruments, and inclusion and exclusion criteria for the design and conduct of scientifically sound cartilage repair study protocols. A consensus statement among the International Cartilage Repair Society (ICRS) and contributing authors experienced in clinical trial design and implementation was achieved. Conclusions: High-quality clinical research methodology is critical for the optimal evaluation of current and new cartilage repair technologies. In addition to generally applicable principles for orthopedic study design, specific criteria and considerations apply to cartilage repair studies. Systematic application of these criteria and considerations can facilitate study designs that are scientifically rigorous, ethical, practical, and appropriate for the question(s) being addressed in any given cartilage repair research project. PMID:26069574

Health system strategies supporting transition to adult care.

PubMed

Hepburn, Charlotte Moore; Cohen, Eyal; Bhawra, Jasmin; Weiser, Natalie; Hayeems, Robin Z; Guttmann, Astrid

2015-06-01

The transition from paediatric to adult care is associated with poor clinical outcomes, increased costs and low patient and family satisfaction. However, little is known about health system strategies to streamline and safeguard care for youth transitioning to adult services. Moreover, the needs of children and youth are often excluded from broader health system reform discussions, leaving this population especially vulnerable to system 'disintegration'. (1) To explore the international policy profile of paediatric-to-adult care transitions, and (2) to document policy objectives, initiatives and outcomes for jurisdictions publicly committed to addressing transition issues. An international policy scoping review of all publicly available government documents detailing transition-related strategies was completed using a web-based search. Our analysis included a comparable cohort of nine wealthy Organisation for Economic Co-operation and Development (OECD) jurisdictions with Beveridge-style healthcare systems (deemed those most likely to benefit from system-level transition strategies). Few jurisdictions address transition of care issues in either health or broader social policy documents. While many jurisdictions refer to standardised practice guidelines, a few report the intention to use powerful policy levers (including physician remuneration and non-physician investments) to facilitate the uptake of best practice. Most jurisdictions do not address the policy infrastructure required to support successful transitions, and rigorous evaluations of transition strategies are rare. Despite the well-documented risks and costs associated with a poor transition from paediatric to adult care, little policy attention has been paid to this issue. We recommend that healthcare providers engage health system planners in the design and evaluation of system-level, policy-sensitive transition strategies. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://group.bmj.com/group/rights-licensing/permissions.

Geodatabase design and characteristics of geologic information for a geodatabase of selected wells penetrating the Austin Group in central Bexar County, Texas, 2010

USGS Publications Warehouse

Pedraza, Diana E.; Shah, Sachin D.

2010-01-01

The U.S. Geological Survey, in cooperation with the San Antonio Water System, developed a geodatabase of geologic and hydrogeologic information for selected wells penetrating the Austin Group in central Bexar County, Texas. The Austin Group functions as an upper confining unit to the Edwards aquifer and is the thickest and most permeable of the Edwards aquifer confining units. The geologic and hydrogeologic information pertains to a 377-square-mile study area that encompasses central Bexar County. Data were compiled primarily from drillers' and borehole geophysical logs from federal, State, and local agencies and published reports. Austin Group characteristics compiled for 523 unique wells are documented (if known), including year drilled, well depth, altitude of top and base of the Austin Group, and thickness of the Austin Group.

Flight design system-1 system design. Volume 5: Data management and data base documentation support system. [for shuttle flight planning

NASA Technical Reports Server (NTRS)

1979-01-01

Application software intended to reduce the man-hours required per flight design cycle by producing major flight design documents with little or no manual typing is described. The documentation support software is divided into two separately executable processors. However, since both processors support the same overall functions, and most of the software contained in one is also contained in the other, both are collectively presented.

78 FR 69928 - 35th Meeting: RTCA Special Committee 206, Aeronautical Information and Meteorological Data Link...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-11-21

...-Groups meetings SG4: SE2020 Eddy Dissipation Rate (EDR) Turbulence Project Plenary--SG3 Architecture Document FRAC Resolution 11 December Plenary--SG3 Architecture Document FRAC Resolution Sub-Group Meetings 12 December Plenary--SG3 Architecture Document FRAC Resolution Sub-Group Meetings 13 December Closing...

ROMPS critical design review. Volume 3: Furnace module design documentation

NASA Technical Reports Server (NTRS)

Dobbs, M. E.

1992-01-01

As part of the furnace module design documentation, the furnace module Easylab programs definitions and command variables are described. Also included are Easylab commands flow charts and fault conditions.

A Nursing Intelligence System to Support Secondary Use of Nursing Routine Data

PubMed Central

Rauchegger, F.; Ammenwerth, E.

2015-01-01

Summary Background Nursing care is facing exponential growth of information from nursing documentation. This amount of electronically available data collected routinely opens up new opportunities for secondary use. Objectives To present a case study of a nursing intelligence system for reusing routinely collected nursing documentation data for multiple purposes, including quality management of nursing care. Methods The SPIRIT framework for systematically planning the reuse of clinical routine data was leveraged to design a nursing intelligence system which then was implemented using open source tools in a large university hospital group following the spiral model of software engineering. Results The nursing intelligence system is in routine use now and updated regularly, and includes over 40 million data sets. It allows the outcome and quality analysis of data related to the nursing process. Conclusions Following a systematic approach for planning and designing a solution for reusing routine care data appeared to be successful. The resulting nursing intelligence system is useful in practice now, but remains malleable for future changes. PMID:26171085

Re-analysis of human immunodeficiency virus type 1 isolates from Cyprus and Greece, initially designated 'subtype I', reveals a unique complex A/G/H/K/? mosaic pattern.

PubMed

Paraskevis, D; Magiorkinis, M; Vandamme, A M; Kostrikis, L G; Hatzakis, A

2001-03-01

Human immunodeficiency virus type 1 (HIV-1) has been classified into three main groups and 11 distinct subtypes. Moreover, several circulating recombinant forms (CRFs) of HIV-1 have been recently documented to have spread widely causing extensive HIV-1 epidemics. A subtype, initially designated I (CRF04_cpx), was documented in Cyprus and Greece and was found to comprise regions of sequence derived from subtypes A and G as well as regions of unclassified sequence. Re-analysis of the three full-length CRF04_cpx sequences that were available revealed a mosaic genomic organization of unique complexity comprising regions of sequence from at least five distinct subtypes, A, G, H, K and unclassified regions. These strains account for approximately 2% of the total HIV-1-infected population in Greece, thus providing evidence of the great capability of HIV-1 to recombine and produce highly divergent strains which can be spread successfully through different infection routes.

DataRocket: Interactive Visualisation of Data Structures

NASA Astrophysics Data System (ADS)

Parkes, Steve; Ramsay, Craig

2010-08-01

CodeRocket is a software engineering tool that provides cognitive support to the software engineer for reasoning about a method or procedure and for documenting the resulting code [1]. DataRocket is a software engineering tool designed to support visualisation and reasoning about program data structures. DataRocket is part of the CodeRocket family of software tools developed by Rapid Quality Systems [2] a spin-out company from the Space Technology Centre at the University of Dundee. CodeRocket and DataRocket integrate seamlessly with existing architectural design and coding tools and provide extensive documentation with little or no effort on behalf of the software engineer. Comprehensive, abstract, detailed design documentation is available early on in a project so that it can be used for design reviews with project managers and non expert stakeholders. Code and documentation remain fully synchronised even when changes are implemented in the code without reference to the existing documentation. At the end of a project the press of a button suffices to produce the detailed design document. Existing legacy code can be easily imported into CodeRocket and DataRocket to reverse engineer detailed design documentation making legacy code more manageable and adding substantially to its value. This paper introduces CodeRocket. It then explains the rationale for DataRocket and describes the key features of this new tool. Finally the major benefits of DataRocket for different stakeholders are considered.

Changing School Culture: Using Documentation to Support Collaborative Inquiry

ERIC Educational Resources Information Center

Given, Heidi; Kuh, Lisa; LeeKeenan, Debbie; Mardell, Ben; Redditt, Susan; Twombly, Susan

2010-01-01

This article considers how documentation as a professional development tool acts as a change agent for teachers and how collective engagement in the documentation process mediates the inherent tensions of working and learning in a group. Three groups of educators, at three distinct schools, used Reggio Emilia-inspired documentation as the…

C4MIP - The Coupled Climate-Carbon Cycle Model Intercomparison Project: experimental protocol for CMIP6

NASA Astrophysics Data System (ADS)

Jones, Chris D.; Arora, Vivek; Friedlingstein, Pierre; Bopp, Laurent; Brovkin, Victor; Dunne, John; Graven, Heather; Hoffman, Forrest; Ilyina, Tatiana; John, Jasmin G.; Jung, Martin; Kawamiya, Michio; Koven, Charlie; Pongratz, Julia; Raddatz, Thomas; Randerson, James T.; Zaehle, Sönke

2016-08-01

Coordinated experimental design and implementation has become a cornerstone of global climate modelling. Model Intercomparison Projects (MIPs) enable systematic and robust analysis of results across many models, by reducing the influence of ad hoc differences in model set-up or experimental boundary conditions. As it enters its 6th phase, the Coupled Model Intercomparison Project (CMIP6) has grown significantly in scope with the design and documentation of individual simulations delegated to individual climate science communities. The Coupled Climate-Carbon Cycle Model Intercomparison Project (C4MIP) takes responsibility for design, documentation, and analysis of carbon cycle feedbacks and interactions in climate simulations. These feedbacks are potentially large and play a leading-order contribution in determining the atmospheric composition in response to human emissions of CO2 and in the setting of emissions targets to stabilize climate or avoid dangerous climate change. For over a decade, C4MIP has coordinated coupled climate-carbon cycle simulations, and in this paper we describe the C4MIP simulations that will be formally part of CMIP6. While the climate-carbon cycle community has created this experimental design, the simulations also fit within the wider CMIP activity, conform to some common standards including documentation and diagnostic requests, and are designed to complement the CMIP core experiments known as the Diagnostic, Evaluation and Characterization of Klima (DECK). C4MIP has three key strands of scientific motivation and the requested simulations are designed to satisfy their needs: (1) pre-industrial and historical simulations (formally part of the common set of CMIP6 experiments) to enable model evaluation, (2) idealized coupled and partially coupled simulations with 1 % per year increases in CO2 to enable diagnosis of feedback strength and its components, (3) future scenario simulations to project how the Earth system will respond to anthropogenic activity over the 21st century and beyond. This paper documents in detail these simulations, explains their rationale and planned analysis, and describes how to set up and run the simulations. Particular attention is paid to boundary conditions, input data, and requested output diagnostics. It is important that modelling groups participating in C4MIP adhere as closely as possible to this experimental design.

C4MIP – The Coupled Climate–Carbon Cycle Model Intercomparison Project: Experimental protocol for CMIP6

DOE Office of Scientific and Technical Information (OSTI.GOV)

Jones, Chris D.; Arora, Vivek; Friedlingstein, Pierre

Coordinated experimental design and implementation has become a cornerstone of global climate modelling. Model Intercomparison Projects (MIPs) enable systematic and robust analysis of results across many models, by reducing the influence of ad hoc differences in model set-up or experimental boundary conditions. As it enters its 6th phase, the Coupled Model Intercomparison Project (CMIP6) has grown significantly in scope with the design and documentation of individual simulations delegated to individual climate science communities. The Coupled Climate–Carbon Cycle Model Intercomparison Project (C4MIP) takes responsibility for design, documentation, and analysis of carbon cycle feedbacks and interactions in climate simulations. These feedbacks aremore » potentially large and play a leading-order contribution in determining the atmospheric composition in response to human emissions of CO 2 and in the setting of emissions targets to stabilize climate or avoid dangerous climate change. For over a decade, C4MIP has coordinated coupled climate–carbon cycle simulations, and in this paper we describe the C4MIP simulations that will be formally part of CMIP6. While the climate–carbon cycle community has created this experimental design, the simulations also fit within the wider CMIP activity, conform to some common standards including documentation and diagnostic requests, and are designed to complement the CMIP core experiments known as the Diagnostic, Evaluation and Characterization of Klima (DECK). C4MIP has three key strands of scientific motivation and the requested simulations are designed to satisfy their needs: (1) pre-industrial and historical simulations (formally part of the common set of CMIP6 experiments) to enable model evaluation, (2) idealized coupled and partially coupled simulations with 1 % per year increases in CO 2 to enable diagnosis of feedback strength and its components, (3) future scenario simulations to project how the Earth system will respond to anthropogenic activity over the 21st century and beyond. This study documents in detail these simulations, explains their rationale and planned analysis, and describes how to set up and run the simulations. Particular attention is paid to boundary conditions, input data, and requested output diagnostics. It is important that modelling groups participating in C4MIP adhere as closely as possible to this experimental design.« less

C4MIP – The Coupled Climate–Carbon Cycle Model Intercomparison Project: Experimental protocol for CMIP6

DOE PAGES

Jones, Chris D.; Arora, Vivek; Friedlingstein, Pierre; ...

2016-08-25

Coordinated experimental design and implementation has become a cornerstone of global climate modelling. Model Intercomparison Projects (MIPs) enable systematic and robust analysis of results across many models, by reducing the influence of ad hoc differences in model set-up or experimental boundary conditions. As it enters its 6th phase, the Coupled Model Intercomparison Project (CMIP6) has grown significantly in scope with the design and documentation of individual simulations delegated to individual climate science communities. The Coupled Climate–Carbon Cycle Model Intercomparison Project (C4MIP) takes responsibility for design, documentation, and analysis of carbon cycle feedbacks and interactions in climate simulations. These feedbacks aremore » potentially large and play a leading-order contribution in determining the atmospheric composition in response to human emissions of CO 2 and in the setting of emissions targets to stabilize climate or avoid dangerous climate change. For over a decade, C4MIP has coordinated coupled climate–carbon cycle simulations, and in this paper we describe the C4MIP simulations that will be formally part of CMIP6. While the climate–carbon cycle community has created this experimental design, the simulations also fit within the wider CMIP activity, conform to some common standards including documentation and diagnostic requests, and are designed to complement the CMIP core experiments known as the Diagnostic, Evaluation and Characterization of Klima (DECK). C4MIP has three key strands of scientific motivation and the requested simulations are designed to satisfy their needs: (1) pre-industrial and historical simulations (formally part of the common set of CMIP6 experiments) to enable model evaluation, (2) idealized coupled and partially coupled simulations with 1 % per year increases in CO 2 to enable diagnosis of feedback strength and its components, (3) future scenario simulations to project how the Earth system will respond to anthropogenic activity over the 21st century and beyond. This study documents in detail these simulations, explains their rationale and planned analysis, and describes how to set up and run the simulations. Particular attention is paid to boundary conditions, input data, and requested output diagnostics. It is important that modelling groups participating in C4MIP adhere as closely as possible to this experimental design.« less

Occupational therapy and physiotherapy for the patient with burns: principles and management guidelines.

PubMed

Simons, M; King, S; Edgar, D

2003-01-01

Clinical practice guidelines are a tool to assist with clinical decision making. They provide information about the care for a condition and make recommendations based on research evidence, which can be adapted locally. A focus group within the Allied Health Interest Group of the Australian and New Zealand Burn Association has compiled the "Occupational Therapy and Physiotherapy for the Patient with Burns--Principles and Management Guidelines." These guidelines are designed as a practical guide to the relevant clinical knowledge and therapy intervention techniques required for effective patient management. Content areas include respiratory management, edema management, splinting and positioning, physical function (mobility, function, exercise), scar management, and psychosocial and mutual elements. The document has undergone extensive review by members of the Australian and New Zealand Burn Association to ensure clarity, internal consistency, and acceptability. The guidelines have been endorsed by the Australian and New Zealand Burn Association. An abridged version of the guidelines is included in this article, with the full document available from www.anzba.org.au.

Alternatives for Developing User Documentation for Applications Software

DTIC Science & Technology

1991-09-01

style that is designed to match adult reading behaviors, using reader-based writing techniques, developing effective graphics , creating reference aids...involves research, analysis, design , and testing. The writer must have a solid understanding of the technical aspects of the document being prepared, good...ABSTRACT The preparation of software documentation is an iterative process that involves research, analysis, design , and testing. The writer must have

Consensus on guidelines for stereotactic neurosurgery for psychiatric disorders

PubMed Central

Nuttin, Bart; Wu, Hemmings; Mayberg, Helen; Hariz, Marwan; Gabriëls, Loes; Galert, Thorsten; Merkel, Reinhard; Kubu, Cynthia; Vilela-Filho, Osvaldo; Matthews, Keith; Taira, Takaomi; Lozano, Andres M; Schechtmann, Gastón; Doshi, Paresh; Broggi, Giovanni; Régis, Jean; Alkhani, Ahmed; Sun, Bomin; Eljamel, Sam; Schulder, Michael; Kaplitt, Michael; Eskandar, Emad; Rezai, Ali; Krauss, Joachim K; Hilven, Paulien; Schuurman, Rick; Ruiz, Pedro; Chang, Jin Woo; Cosyns, Paul; Lipsman, Nir; Voges, Juergen; Cosgrove, Rees; Li, Yongjie; Schlaepfer, Thomas

2014-01-01

Background For patients with psychiatric illnesses remaining refractory to ‘standard’ therapies, neurosurgical procedures may be considered. Guidelines for safe and ethical conduct of such procedures have previously and independently been proposed by various local and regional expert groups. Methods To expand on these earlier documents, representative members of continental and international psychiatric and neurosurgical societies, joined efforts to further elaborate and adopt a pragmatic worldwide set of guidelines. These are intended to address a broad range of neuropsychiatric disorders, brain targets and neurosurgical techniques, taking into account cultural and social heterogeneities of healthcare environments. Findings The proposed consensus document highlights that, while stereotactic ablative procedures such as cingulotomy and capsulotomy for depression and obsessive-compulsive disorder are considered ‘established’ in some countries, they still lack level I evidence. Further, it is noted that deep brain stimulation in any brain target hitherto tried, and for any psychiatric or behavioural disorder, still remains at an investigational stage. Researchers are encouraged to design randomised controlled trials, based on scientific and data-driven rationales for disease and brain target selection. Experienced multidisciplinary teams are a mandatory requirement for the safe and ethical conduct of any psychiatric neurosurgery, ensuring documented refractoriness of patients, proper consent procedures that respect patient's capacity and autonomy, multifaceted preoperative as well as postoperative long-term follow-up evaluation, and reporting of effects and side effects for all patients. Interpretation This consensus document on ethical and scientific conduct of psychiatric surgery worldwide is designed to enhance patient safety. PMID:24444853

Emergency management training program: Guide to good practice

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

1991-07-01

The Emergency Management Training Program Guide to Good Practice is a project of the Training Resources and Data Exchange (TRADE) Emergency Management Issues Special Interest Group (EMI SIG). EMI SIG members expressed interest in a resource to assist in development of a comprehensive emergency management training program. This publication provides guidelines, methods, and materials for EMI SIG members to use, assisting in complete and effective emergency management programs. The purposes of the Emergency Management Training Program Guide to Good Practice are: Provide guidance in the development and management of Emergency Management (EM) training programs; Assist EM trainers to incorporate componentsmore » of the DOE Emergency Management System philosophy of planning, preparedness, readiness assurance, and response into EM training programs; Help EM training managers meet EM training requirements and conditions established by current regulations and policies; Supplement other TRADE EMI SIG documents and complement individual facility training documents. This program is designed for emergency management personnel who are responsible for providing or overseeing EM training but who do not necessarily possess expertise in developing training. It provides good practices from the manager's point of view on how to produce, administer, and document facility EM training programs in the spirit of the DOE EM system philosophy. Basic guidance is also included for personnel who design, develop, deliver, and/or evaluate EM training programs or parts. This guidance includes key points of EM training programs and identifies other documents that contain useful and/or more detailed training information.« less

Emergency management training program: Guide to good practice

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

1991-07-01

The Emergency Management Training Program Guide to Good Practice is a project of the Training Resources and Data Exchange (TRADE) Emergency Management Issues Special Interest Group (EMI SIG). EMI SIG members expressed interest in a resource to assist in development of a comprehensive emergency management training program. This publication provides guidelines, methods, and materials for EMI SIG members to use, assisting in complete and effective emergency management programs. The purposes of the Emergency Management Training Program Guide to Good Practice are: Provide guidance in the development and management of Emergency Management (EM) training programs; Assist EM trainers to incorporate componentsmore » of the DOE Emergency Management System philosophy of planning, preparedness, readiness assurance, and response into EM training programs; Help EM training managers meet EM training requirements and conditions established by current regulations and policies; Supplement other TRADE EMI SIG documents and complement individual facility training documents. This program is designed for emergency management personnel who are responsible for providing or overseeing EM training but who do not necessarily possess expertise in developing training. It provides good practices from the manager`s point of view on how to produce, administer, and document facility EM training programs in the spirit of the DOE EM system philosophy. Basic guidance is also included for personnel who design, develop, deliver, and/or evaluate EM training programs or parts. This guidance includes key points of EM training programs and identifies other documents that contain useful and/or more detailed training information.« less

Xyce parallel electronic simulator design.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Thornquist, Heidi K.; Rankin, Eric Lamont; Mei, Ting

2010-09-01

This document is the Xyce Circuit Simulator developer guide. Xyce has been designed from the 'ground up' to be a SPICE-compatible, distributed memory parallel circuit simulator. While it is in many respects a research code, Xyce is intended to be a production simulator. As such, having software quality engineering (SQE) procedures in place to insure a high level of code quality and robustness are essential. Version control, issue tracking customer support, C++ style guildlines and the Xyce release process are all described. The Xyce Parallel Electronic Simulator has been under development at Sandia since 1999. Historically, Xyce has mostly beenmore » funded by ASC, the original focus of Xyce development has primarily been related to circuits for nuclear weapons. However, this has not been the only focus and it is expected that the project will diversify. Like many ASC projects, Xyce is a group development effort, which involves a number of researchers, engineers, scientists, mathmaticians and computer scientists. In addition to diversity of background, it is to be expected on long term projects for there to be a certain amount of staff turnover, as people move on to different projects. As a result, it is very important that the project maintain high software quality standards. The point of this document is to formally document a number of the software quality practices followed by the Xyce team in one place. Also, it is hoped that this document will be a good source of information for new developers.« less

Research Needs in Fire Safety for the Human Exploration and Utilization of Space: Proceedings and Research Plan

NASA Technical Reports Server (NTRS)

Ruff, Gary A.

2003-01-01

The purpose of the workshop documented in this publication was to bring together personnel responsible for the design and operations of the International Space Station (ISS) and the fire protection research community to review the current knowledge in fire safety relative to spacecraft. From this review, research needs were identified that were then used to formulate a research plan with specific objectives. In this document, I have attempted to capture the very informative and lively discussions that occurred in the plenary sessions and the working groups. I hope that it will be useful to readers and serve as a significant step in assuring fire protection for the crews of current and future spacecraft.

Calendar years 1989 and 1990 monitoring well installation program Y-12 plant, Oak Ridge, Tennessee

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

1991-10-01

This report documents the well-construction activities at the Y-12 Plant in Oak Ridge, Tennessee during 1989 and 1990. The well- construction program consisted of installing seventy-five monitoring wells. Geologists from ERCE (formally the Engineering, Design and Geosciences Group) and Martin Marietta Energy Systems (Energy Systems), supervised and documented well-construction activities and monitored for health and safety concerns. Sixty-seven monitoring wells were installed under the supervision of an ERCE geologist from March 1989 to September 1990. Beginning in September 1990, Energy Systems supervised drilling activities for eight monitoring wells, the last of which was completed in December 1990. 9 refs., 3more » figs., 2 tabs.« less

Document Design: A Review of the Relevant Research.

ERIC Educational Resources Information Center

Felker, Daniel B., Ed.

Research from several disciplines has been examined to create this literature review of information on document design, the overall movement toward producing public documents that the intended users can understand. Six chapters review appropriate research from the areas of psycholinguistics, cognitive psychology, instructional research,…

Transit safety retrofit package development : architecture and design specifications.

DOT National Transportation Integrated Search

2014-05-01

The Architecture and Design Specifications capture the TRP system architecture and design that fulfills the technical objectives stated in the TRP requirements document. The document begins with an architectural overview that identifies and describes...

A hybrid intelligence approach to artifact recognition in digital publishing

NASA Astrophysics Data System (ADS)

Vega-Riveros, J. Fernando; Santos Villalobos, Hector J.

2006-02-01

The system presented integrates rule-based and case-based reasoning for artifact recognition in Digital Publishing. In Variable Data Printing (VDP) human proofing could result prohibitive since a job could contain millions of different instances that may contain two types of artifacts: 1) evident defects, like a text overflow or overlapping 2) style-dependent artifacts, subtle defects that show as inconsistencies with regard to the original job design. We designed a Knowledge-Based Artifact Recognition tool for document segmentation, layout understanding, artifact detection, and document design quality assessment. Document evaluation is constrained by reference to one instance of the VDP job proofed by a human expert against the remaining instances. Fundamental rules of document design are used in the rule-based component for document segmentation and layout understanding. Ambiguities in the design principles not covered by the rule-based system are analyzed by case-based reasoning, using the Nearest Neighbor Algorithm, where features from previous jobs are used to detect artifacts and inconsistencies within the document layout. We used a subset of XSL-FO and assembled a set of 44 document samples. The system detected all the job layout changes, while obtaining an overall average accuracy of 84.56%, with the highest accuracy of 92.82%, for overlapping and the lowest, 66.7%, for the lack-of-white-space.

Overview of Design, Lifecycle, and Safety for Computer-Based Systems

NASA Technical Reports Server (NTRS)

Torres-Pomales, Wilfredo

2015-01-01

This document describes the need and justification for the development of a design guide for safety-relevant computer-based systems. This document also makes a contribution toward the design guide by presenting an overview of computer-based systems design, lifecycle, and safety.

DOE Office of Scientific and Technical Information (OSTI.GOV)

NONE

This report supplements the final safety evaluation report (FSER) for the System 80+ standard design. The FSER was issued by the US Nuclear Regulatory Commission (NRC) staff as NUREG-1462 in August 1994 to document the NRC staff`s review of the System 80+ design. The System 80+ design was submitted by Asea Brown Boveri-Combustion Engineering (ABB-CE), in accordance with the procedures of Subpart B to Part 52 of Title 10 of the Code of Federal Regulations. This supplement documents the NRC staff`s review of the changes to the System 80+ design documentation since the issuance of the FSER. ABB-CE made thesemore » changes as a result of its review of the System 80+ design details. The NRC staff concludes that the changes to the System 80+ design documentation are acceptable, and that ABB-CE`s application for design certification meets the requirements of Subpart B to 10 CFR Part 52 that are applicable and technically relevant to the System 80+ design.« less

Behavioral Change and Building Performance: Strategies for Significant, Persistent, and Measurable Institutional Change

DOE Office of Scientific and Technical Information (OSTI.GOV)

Wolfe, Amy K.; Malone, Elizabeth L.; Heerwagen, Judith H.

2014-04-01

The people who use Federal buildings — Federal employees, operations and maintenance staff, and the general public — can significantly impact a building’s environmental performance and the consumption of energy, water, and materials. Many factors influence building occupants’ use of resources (use behaviors) including work process requirements, ability to fulfill agency missions, new and possibly unfamiliar high-efficiency/high-performance building technologies; a lack of understanding, education, and training; inaccessible information or ineffective feedback mechanisms; and cultural norms and institutional rules and requirements, among others. While many strategies have been used to introduce new occupant use behaviors that promote sustainability and reduced resourcemore » consumption, few have been verified in the scientific literature or have properly documented case study results. This paper documents validated strategies that have been shown to encourage new use behaviors that can result in significant, persistent, and measureable reductions in resource consumption. From the peer-reviewed literature, the paper identifies relevant strategies for Federal facilities and commercial buildings that focus on the individual, groups of individuals (e.g., work groups), and institutions — their policies, requirements, and culture. The paper documents methods with evidence of success in changing use behaviors and enabling occupants to effectively interact with new technologies/designs. It also provides a case study of the strategies used at a Federal facility — Fort Carson, Colorado. The paper documents gaps in the current literature and approaches, and provides topics for future research.« less

Marketing of menthol cigarettes and consumer perceptions: a review of tobacco industry documents.

PubMed

Anderson, Stacey J

2011-05-01

To examine tobacco industry marketing of menthol cigarettes and to determine what the tobacco industry knew about consumer perceptions of menthol. A snowball sampling design was used to systematically search the Legacy Tobacco Documents Library (LTDL) (http://legacy.library.ucsf.edu) between 28 February and 27 April 2010. Of the approximately 11 million documents available in the LTDL, the iterative searches returned tens of thousands of results from the major US tobacco companies and affiliated organisations. A collection of 953 documents from the 1930s to the first decade of the 21st century relevant to 1 or more of the research questions were qualitatively analysed, as follows: (1) are/were menthol cigarettes marketed with health reassurance messages? (2) What other messages come from menthol cigarette advertising? (3) How do smokers view menthol cigarettes? (4) Were menthol cigarettes marketed to specific populations? Menthol cigarettes were marketed as, and are perceived by consumers to be, healthier than non-menthol cigarettes. Menthol cigarettes are also marketed to specific social and demographic groups, including African-Americans, young people and women, and are perceived by consumers to signal social group belonging. The tobacco industry knew consumers perceived menthol as healthier than non-menthol cigarettes, and this was the intent behind marketing. Marketing emphasising menthol attracts consumers who may not otherwise progress to regular smoking, including young, inexperienced users and those who find 'regular' cigarettes undesirable. Such marketing may also appeal to health-concerned smokers who might otherwise quit.

Management of metastatic retroperitoneal sarcoma: a consensus approach from the Trans-Atlantic Retroperitoneal Sarcoma Working Group (TARPSWG).

PubMed

2018-04-01

Retroperitoneal sarcoma (RPS) is a rare disease accounting for 0.1%-0.2% of all malignancies. Management of RPS is complex and requires multidisciplinary, tailored treatment strategies at all stages, but especially in the context of metastatic or multifocal recurrent disease. Due to the rarity and heterogeneity of this family of diseases, the literature to guide management is limited. The Trans-Atlantic Retroperitoneal Sarcoma Working Group (TARPSWG) is an international collaboration of sarcoma experts from all disciplines convened in an effort to overcome these limitations. The TARPSWG has compiled the available evidence surrounding metastatic and multifocally recurrent RPS along with expert opinion in an iterative process to generate a consensus document regarding the complex management of this disease. The objective of this document is to guide sarcoma specialists from all disciplines in the diagnosis and treatment of multifocal recurrent or metastatic RPS. All aspects of patient assessment, diagnostic processes, local and systemic treatments, and palliation are reviewed in this document, and consensus recommendations provided accordingly. Recommendations were guided by available evidence, in conjunction with expert opinion where evidence was lacking. This consensus document combines the available literature regarding the management of multifocally recurrent or metastastic RPS with the practical expertise of high-volume sarcoma centers from multiple countries. It is designed as a tool for decision making in the complex multidisciplinary management of this condition and is expected to standardize management across centers, thereby ensuring that patients receive the highest quality care.

Impact of a Paper vs Virtual Simulated Patient Case on Student-Perceived Confidence and Engagement

PubMed Central

Gallimore, Casey E.; Pitterle, Michael; Morrill, Josh

2016-01-01

Objective. To evaluate online case simulation vs a paper case on student confidence and engagement. Design. Students enrolled in a pharmacotherapy laboratory course completed a patient case scenario as a component of an osteoarthritis laboratory module. Two laboratory sections used a paper case (n=53); three sections used an online virtual case simulation (n=81). Student module performance was assessed through a submitted subjective objective assessment plan (SOAP) note. Students completed pre/post surveys to measure self-perceived confidence in providing medication management. The simulation group completed postmodule questions related to realism and engagement of the online virtual case simulation. Group assessments were performed using chi-square and Mann Whitney tests. Assessment. A significant increase in all 13 confidence items was seen in both student groups following completion of the laboratory module. The simulation group had an increased change of confidence compared to the paper group in assessing medication efficacy and documenting a thorough assessment. Comparing the online virtual simulation to a paper case, students agreed the learning experience increased interest, enjoyment, relevance, and realism. The simulation group performed better on the subjective SOAP note domain though no differences in total SOAP note scores was found between the two groups. Conclusion. Virtual case simulations result in increased student engagement and may lead to improved documentation performance in the subjective domain of SOAP notes. However, virtual patient cases may offer limited benefit over paper cases in improving overall student self-confidence to provide medication management. PMID:26941442

Software Manuals: Where Instructional Design and Technical Writing Join Forces.

ERIC Educational Resources Information Center

Thurston, Walter, Ed.

1986-01-01

Presents highlights from a panel discussion by well known San Francisco Bay area documentation writers, instructional designers, and human performance technologists. Three issues on user performance and documentation are addressed: whether people avoid reading user manuals and why; major human factors influencing documentation use; and…

A Review of Advanced Sewer System Design Technologies (WERF Report INFR4SG09d)

EPA Science Inventory

Abstract: This document seeks to collect into one place current and new technologies about sewerage system design. The document organizes the information found in the 295 documents that were reviewed into six subject areas: Advanced Onsite Technologies; Alternative Wastewater C...

Technical Support Document: 50% Energy Savings Design Technology Packages for Highway Lodging Buildings

DOE Office of Scientific and Technical Information (OSTI.GOV)

Jiang, Wei; Gowri, Krishnan; Lane, Michael D.

2009-09-28

This Technical Support Document (TSD) describes the process, methodology and assumptions for development of the 50% Energy Savings Design Technology Packages for Highway Lodging Buildings, a design guidance document intended to provide recommendations for achieving 50% energy savings in highway lodging properties over the energy-efficiency levels contained in ANSI/ASHRAE/IESNA Standard 90.1-2004, Energy Standard for Buildings Except Low-Rise Residential Buildings.

A Tree Locality-Sensitive Hash for Secure Software Testing

DTIC Science & Technology

2017-09-14

errors, or to look for vulnerabilities that could allow a nefarious actor to use our software against us. Ultimately, all testing is designed to find...and an equivalent number of feasible paths discovered by Klee. 1.5 Summary This document the Tree Locality-Sensitive Hash (TLSH), a locality-senstive...performing two groups of tests that verify the accuracy and usefulness of TLSH. Chapter 5 summarizes the contents of the dissertation and lists avenues

Cockpit resource management training

NASA Technical Reports Server (NTRS)

Yocum, M.; Foushee, C.

1984-01-01

Cockpit resource management which is a multifaceted concept is outlined. The system involves the effective coordination of many resources: aircraft systems, company, air traffic control, equipment, navigational aids, documents, and manuals. The main concept, however, is group interaction. Problems which arise from lack of coordination, decision making, and lack of communication are pointed out. Implementation by the regional airline industry of cockpit resource management, designed to deal with human interactions problems in the most cost effective manner, is discussed.

Genetic Variations in SLCO Transporter Genes Contributing to Racial Disparity in Aggressiveness of Prostate Cancer

DTIC Science & Technology

2017-10-01

should not be construed as an official Department of the Army position, policy or decision unless so designated by other documentation. REPORT... control number. PLEASE DO NOT RETURN YOUR FORM TO THE ABOVE ADDRESS. 1. REPORT DATE October 2017 2. REPORT TYPE Annual 3. DATES COVERED 15 Sep 2016...statistically significant difference among these three groups in either tumor characteristics including Gleason score, stage and aggressiveness, or

Survey of Computer-Based Message Systems; COM/PortaCOM Conference System: Design Goals and Principles; Computer Conferencing Is More Than Electronic Mail; Effects of the COM Computer Conference System.

ERIC Educational Resources Information Center

Palme, Jacob

The four papers contained in this document provide: (1) a survey of computer based mail and conference systems; (2) an evaluation of systems for both individually addressed mail and group addressing through conferences and distribution lists; (3) a discussion of various methods of structuring the text data in existing systems; and (4) a…

Live Site Demonstration Munitions Response Program Site UXO 01 at Marine Corps Air Ground Combat Center (MCAGCC) Twentynine Palms, California

DTIC Science & Technology

2015-11-01

ground surface (bgs) and is composed of crystalline igneous and metamorphic rocks . The ranges are located on Cajon soils (Jacobs Engineering Group...Twentynine Palms, California ESTCP Project MR-201229 NOVEMBER 2015 Steve Stacy ARCADIS- US , Inc. Distribution Statement A REPORT DOCUMENTATION PAGE...geophysical classification (AGC) technologies for Munitions Response (MR). This demonstration was designed to evaluate the use of AGC methodology

Expansion of the E138A mutation in newly diagnosed HIV-infected patients in Gran Canaria.

PubMed

Chamizo, Francisco; Gilarranz, Raúl; Tosco, Tomás; Carrillo, Deyanira; Holguín, África; Santana, Évora; Pérez-Arellano, Jose Luís; Hernández, Michele; Francés, Adela; Cárdenes, Miguel Ángel; Zarzalejos, Jose María; Pena-López, María José

2016-09-01

Molecular epidemiology allows us to know local HIV transmission and to design strategies of prevention. We studied 25 HIV newly diagnosed patients with the E138A mutation since the year 2010. Most transmission networks involved young and promiscuous men who have sex with men. Recent infection was only documented in patients grouped into the smaller clusters. Copyright © 2016 Elsevier Inc. All rights reserved.

Pain and efficacy rating of a microprocessor-controlled metered injection system for local anaesthesia in minor hand surgery.

PubMed

Nimigan, André S; Gan, Bing Siang

2011-01-01

Purpose. Little attention has been given to syringe design and local anaesthetic administration methods. A microprocessor-controlled anaesthetic delivery device has become available that may minimize discomfort during injection. The purpose of this study was to document the pain experience associated with the use of this system and to compare it with use of a conventional syringe. Methods. A prospective, randomized clinical trial was designed. 40 patients undergoing carpal tunnel release were block randomized according to sex into a two groups: a traditional syringe group and a microprocessor-controlled device group. The primary outcome measure was surgical pain and local anaesthetic administration pain. Secondary outcomes included volume of anaesthetic used and injection time. Results. Analysis showed that equivalent anaesthesia was achieved in the microprocessor-controlled group despite using a significantly lower volume of local anaesthetic (P = .0002). This same group, however, has significantly longer injection times (P < .0001). Pain during the injection process or during surgery was not different between the two groups. Conclusions. This RCT comparing traditional and microprocessor controlled methods of administering local anaesthetic showed similar levels of discomfort in both groups. While the microprocessor-controlled group used less volume, the total time for the administration was significantly greater.

Basic Hitchhiker Payload Requirements

NASA Technical Reports Server (NTRS)

Horan, Stephen

1999-01-01

This document lists the requirements for the NMSU Hitchhiker experiment payload that were developed as part of the EE 498/499 Capstone Design class during the 1999-2000 academic year. This document is used to describe the system needs as described in the mission document. The requirements listed here are those primarily used to generate the basic electronic and data processing requirements developed in the class design document. The needs of the experiment components are more fully described in the draft NASA hitchhiker customer requirements document. Many of the details for the overall payload are given in full detail in the NASA hitchhiker documentation.

Automatic system for computer program documentation

NASA Technical Reports Server (NTRS)

Simmons, D. B.; Elliott, R. W.; Arseven, S.; Colunga, D.

1972-01-01

Work done on a project to design an automatic system for computer program documentation aids was made to determine what existing programs could be used effectively to document computer programs. Results of the study are included in the form of an extensive bibliography and working papers on appropriate operating systems, text editors, program editors, data structures, standards, decision tables, flowchart systems, and proprietary documentation aids. The preliminary design for an automated documentation system is also included. An actual program has been documented in detail to demonstrate the types of output that can be produced by the proposed system.

Development of a tethered personal health record framework for early end-of-life discussions.

PubMed

Bose-Brill, Seuli; Kretovics, Matthew; Ballenger, Taylor; Modan, Gabriella; Lai, Albert; Belanger, Lindsay; Koesters, Stephen; Pressler-Vydra, Taylor; Wills, Celia

2016-06-01

End-of-life planning, known as advance care planning (ACP), is associated with numerous positive outcomes, such as improved patient satisfaction with care and improved patient quality of life in terminal illness. However, patient-provider ACP conversations are rarely performed or documented due to a number of barriers, including time required, perceived lack of skill, and a limited number of resources. Use of tethered personal health records (PHRs) may help streamline ACP conversations and documentations for outpatient workflows. Our objective was to develop an ACP-PHR framework that would be for use in a primary care, outpatient setting. Qualitative content analysis of focus groups and cognitive interviews (participatory design). A novel PHR-ACP tool was developed and tested using data and feedback collected from 4 patient focus groups (n = 13), 1 provider focus group (n = 4), and cognitive interviews (n = 22). Patient focus groups helped develop a focused, 4-question PHR communication tool. Cognitive interviews revealed that, while patients felt framework content and workflow were generally intuitive, minor changes to content and workflow would optimize the framework. A focused framework for electronic ACP communication using a patient portal tethered to the PHR was developed. This framework may provide an efficient way to have ACP conversations in busy outpatient settings.

Automated space processing payloads study. Volume 2, book 1: Technical report. [instrument packages and space shuttles

NASA Technical Reports Server (NTRS)

1975-01-01

The extent was investigated to which experiment hardware and operational requirements can be met by automatic control and material handling devices; payload and system concepts that make extensive use of automation technology are defined. Hardware requirements for each experiment were established and tabulated, and investigations of applicable existing hardware were documented. The capabilities and characteristics of industrial automation equipment, controls, and techniques are presented in the form of a summary of applicable equipment characteristics in three basic mutually-supporting formats. Facilities for performing groups of experiments are defined along with four levitation groups and three furnace groups; major hardware elements required to implement them were identified. A conceptual design definition of ten different automated processing facilities is presented along with the specific equipment to implement each facility and the design layouts of the different units. Constraints and packaging, weight, and power requirements for six payloads postulated for shuttle missions in the 1979 to 1982 time period were examined.

Attending to Communication and Patterns of Interaction: Culturally Sensitive Mental Health Care for Groups of Urban, Ethnically Diverse, Impoverished, and Underserved Women.

PubMed

Molewyk Doornbos, Mary; Zandee, Gail Landheer; DeGroot, Joleen

2014-07-01

The United States is ethnically diverse. This diversity presents challenges to nurses, who, without empirical evidence to design culturally congruent interventions, may contribute to mental health care disparities. Using Leininger's theory of culture care diversity and universality, this study documented communication and interaction patterns of ethnically diverse, urban, impoverished, and underserved women. Using a community-based participatory research framework, 61 Black, Hispanic, and White women participated in focus groups around their experiences with anxiety/depression. Researchers recorded verbal communication, nonverbal behavior, and patterns of interaction. The women's communication and interaction patterns gave evidence of three themes that were evident across all focus groups and five subthemes that emerged along ethnic lines. The results suggest cultural universalities and cultural uniquenesses relative to the communication and interaction patterns of urban, ethnically diverse, impoverished, and underserved women that may assist in the design of culturally sensitive mental health care. © The Author(s) 2014.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Tiradani, Tiradani,Anthony; Altunay, Mine; Dagenhart, David

The Decision Engine is a critical component of the HEP Cloud Facility. It provides the functionality of resource scheduling for disparate resource providers, including those which may have a cost or a restricted allocation of cycles. Along with the architecture, design, and requirements for the Decision Engine, this document will provide the rationale and explanations for various design decisions. In some cases, requirements and interfaces for a limited subset of external services will be included in this document. This document is intended to be a high level design. The design represented in this document is not complete and does notmore » break everything down in detail. The class structures and pseudo-code exist for example purposes to illustrate desired behaviors, and as such, should not be taken literally. The protocols and behaviors are the important items to take from this document. This project is still in prototyping mode so flaws and inconsistencies may exist and should be noted and treated as failures.« less

Knowledge Construction and Knowledge Representation in High School Students' Design of Hypermedia Documents

ERIC Educational Resources Information Center

Chen, Pearl; McGrath, Diane

2003-01-01

This study documented the processes of knowledge construction and knowledge representation in high school students' hypermedia design projects. Analysis of knowledge construction in linking and structural building yielded distinct types and subtypes of hypermedia documents, which were characterized by four features of knowledge representation: (a)…

Shape Memory Alloy Actuator Design: CASMART Collaborative Best Practices

NASA Technical Reports Server (NTRS)

Benafan, Othmane; Brown, Jeff; Calkins, F. Tad; Kumar, Parikshith; Stebner, Aaron; Turner, Travis; Vaidyanathan, Raj; Webster, John; Young, Marcus L.

2011-01-01

Upon examination of shape memory alloy (SMA) actuation designs, there are many considerations and methodologies that are common to them all. A goal of CASMART's design working group is to compile the collective experiences of CASMART's member organizations into a single medium that engineers can then use to make the best decisions regarding SMA system design. In this paper, a review of recent work toward this goal is presented, spanning a wide range of design aspects including evaluation, properties, testing, modeling, alloy selection, fabrication, actuator processing, design optimization, controls, and system integration. We have documented each aspect, based on our collective experiences, so that the design engineer may access the tools and information needed to successfully design and develop SMA systems. Through comparison of several case studies, it is shown that there is not an obvious single, linear route a designer can adopt to navigate the path of concept to product. SMA engineering aspects will have different priorities and emphasis for different applications.

Electronic reminders improve procedure documentation compliance and professional fee reimbursement.

PubMed

Kheterpal, Sachin; Gupta, Ruchika; Blum, James M; Tremper, Kevin K; O'Reilly, Michael; Kazanjian, Paul E

2007-03-01

Medicolegal, clinical, and reimbursement needs warrant complete and accurate documentation. We sought to identify and improve our compliance rate for the documentation of arterial catheterization in the perioperative setting. We first reviewed 12 mo of electronic anesthesia records to establish a baseline compliance rate for arterial catheter documentation. Residents and Certified Registered Nurse Anesthetists were randomly assigned to a control group and experimental group. When surgical incision and anesthesia end were documented in the electronic record keeper, a reminder routine checked for an invasive arterial blood pressure tracing. If a case used an arterial catheter, but no procedure note was observed, the resident or Certified Registered Nurse Anesthetist assigned to the case was sent an automated alphanumeric pager and e-mail reminder. Providers in the control group received no pager or e-mail message. After 2 mo, all staff received the reminders. A baseline compliance rate of 80% was observed (1963 of 2459 catheters documented). During the 2-mo study period, providers in the control group documented 152 of 202 (75%) arterial catheters, and the experimental group documented 177 of 201 (88%) arterial lines (P < 0.001). After all staff began receiving reminders, 309 of 314 arterial lines were documented in a subsequent 2 mo period (98%). Extrapolating this compliance rate to 12 mo of expected arterial catheter placement would result in an annual incremental $40,500 of professional fee reimbursement. The complexity of the tertiary care process results in documentation deficiencies. Inexpensive automated reminders can drastically improve compliance without the need for complicated negative or positive feedback.

76 FR 82079 - AP1000 Design Certification Amendment

Federal Register 2010, 2011, 2012, 2013, 2014

2011-12-30

... reference Revision 15 of the design control document (DCD) (ADAMS Accession No. ML053460400), which... to DAC in the areas of piping design (Chapter 3), instrumentation and control (I&C) systems (Chapter... Systems Manual, as described in the AP1000 Design Control Document, Revision 17, meets the criteria of...

Music interventions and group participation skills of preschoolers with visual impairments: raising questions about music, arousal, and attention.

PubMed

Robb, Sheri L

2003-01-01

The purposes of this pilot study were two-fold: First, to document and compare attentive behavior during music and play-based group instructional sessions and second, to document and compare 4 group participation behaviors during music and play-based sessions. The 4 group participation behaviors included facing a central speaker, following onestep directions, manipulating objects according to their function, and remaining seated. Six of the 12 children enrolled completed the study, with all participants enrolled in an early intervention program due to visual impairments. Study participants were between the ages of 4 and 6 years inclusively. Children participated in 4, 30-minute instructional sessions. Two instructional sessions were music-based and two were play-based with the 4 sessions equally distributed across a 2-week period. An ABBA design was used to control for possible order effects. Each session was videotaped to facilitate collection of behavioral data. Statistical analysis of these data revealed that attentive behavior was significantly higher during music based-sessions (t(5) = 5.81; p =.002). Mean scores for the remaining group participation behaviors were higher in the music condition, but these differences were not statistically significant. Discussion regarding differential outcomes among participants, as well as an exploration of theories related to music, arousal, and attention are discussed in an effort to guide future research.

Recommended HSE-7 documents hierarchy

DOE Office of Scientific and Technical Information (OSTI.GOV)

Klein, R.B.; Jennrich, E.A.; Lund, D.M.

1990-12-12

This report recommends a hierarchy of waste management documents at Los Alamos National Laboratory (LANL or Laboratory''). The hierarchy addresses documents that are required to plan, implement, and document waste management programs at Los Alamos. These documents will enable the waste management group and the six sections contained within that group to satisfy requirements that are imposed upon them by the US Department of Energy (DOE), DOE Albuquerque Operations, US Environmental Protection Agency, various State of New Mexico agencies, and Laboratory management.

Recommended HSE-7 documents hierarchy

DOE Office of Scientific and Technical Information (OSTI.GOV)

Klein, R.B.; Jennrich, E.A.; Lund, D.M.

1990-12-12

This report recommends a hierarchy of waste management documents at Los Alamos National Laboratory (LANL or ``Laboratory``). The hierarchy addresses documents that are required to plan, implement, and document waste management programs at Los Alamos. These documents will enable the waste management group and the six sections contained within that group to satisfy requirements that are imposed upon them by the US Department of Energy (DOE), DOE Albuquerque Operations, US Environmental Protection Agency, various State of New Mexico agencies, and Laboratory management.

A Randomized Longitudinal Factorial Design to Assess Malaria Vector Control and Disease Management Interventions in Rural Tanzania

PubMed Central

Kramer, Randall A.; Mboera, Leonard E. G.; Senkoro, Kesheni; Lesser, Adriane; Shayo, Elizabeth H.; Paul, Christopher J.; Miranda, Marie Lynn

2014-01-01

The optimization of malaria control strategies is complicated by constraints posed by local health systems, infrastructure, limited resources, and the complex interactions between infection, disease, and treatment. The purpose of this paper is to describe the protocol of a randomized factorial study designed to address this research gap. This project will evaluate two malaria control interventions in Mvomero District, Tanzania: (1) a disease management strategy involving early detection and treatment by community health workers using rapid diagnostic technology; and (2) vector control through community-supported larviciding. Six study villages were assigned to each of four groups (control, early detection and treatment, larviciding, and early detection and treatment plus larviciding). The primary endpoint of interest was change in malaria infection prevalence across the intervention groups measured during annual longitudinal cross-sectional surveys. Recurring entomological surveying, household surveying, and focus group discussions will provide additional valuable insights. At baseline, 962 households across all 24 villages participated in a household survey; 2,884 members from 720 of these households participated in subsequent malariometric surveying. The study design will allow us to estimate the effect sizes of different intervention mixtures. Careful documentation of our study protocol may also serve other researchers designing field-based intervention trials. PMID:24840349

A randomized longitudinal factorial design to assess malaria vector control and disease management interventions in rural Tanzania.

PubMed

Kramer, Randall A; Mboera, Leonard E G; Senkoro, Kesheni; Lesser, Adriane; Shayo, Elizabeth H; Paul, Christopher J; Miranda, Marie Lynn

2014-05-16

The optimization of malaria control strategies is complicated by constraints posed by local health systems, infrastructure, limited resources, and the complex interactions between infection, disease, and treatment. The purpose of this paper is to describe the protocol of a randomized factorial study designed to address this research gap. This project will evaluate two malaria control interventions in Mvomero District, Tanzania: (1) a disease management strategy involving early detection and treatment by community health workers using rapid diagnostic technology; and (2) vector control through community-supported larviciding. Six study villages were assigned to each of four groups (control, early detection and treatment, larviciding, and early detection and treatment plus larviciding). The primary endpoint of interest was change in malaria infection prevalence across the intervention groups measured during annual longitudinal cross-sectional surveys. Recurring entomological surveying, household surveying, and focus group discussions will provide additional valuable insights. At baseline, 962 households across all 24 villages participated in a household survey; 2,884 members from 720 of these households participated in subsequent malariometric surveying. The study design will allow us to estimate the effect sizes of different intervention mixtures. Careful documentation of our study protocol may also serve other researchers designing field-based intervention trials.

Oak Ridge Environmental Information System (OREIS) functional system design document

DOE Office of Scientific and Technical Information (OSTI.GOV)

Birchfield, T.E.; Brown, M.O.; Coleman, P.R.

1994-03-01

The OREIS Functional System Design document provides a detailed functional description of the Oak Ridge Environmental Information System (OREIS). It expands the system requirements defined in the OREIS Phase 1-System Definition Document (ES/ER/TM-34). Documentation of OREIS development is based on the Automated Data Processing System Development Methodology, a Martin Marietta Energy Systems, Inc., procedure written to assist in developing scientific and technical computer systems. This document focuses on the development of the functional design of the user interface, which includes the integration of commercial applications software. The data model and data dictionary are summarized briefly; however, the Data Management Planmore » for OREIS (ES/ER/TM-39), a companion document to the Functional System Design document, provides the complete data dictionary and detailed descriptions of the requirements for the data base structure. The OREIS system will provide the following functions, which are executed from a Menu Manager: (1) preferences, (2) view manager, (3) macro manager, (4) data analysis (assisted analysis and unassisted analysis), and (5) spatial analysis/map generation (assisted ARC/INFO and unassisted ARC/INFO). Additional functionality includes interprocess communications, which handle background operations of OREIS.« less

Using CASE tools to write engineering specifications

NASA Astrophysics Data System (ADS)

Henry, James E.; Howard, Robert W.; Iveland, Scott T.

1993-08-01

There are always a wide variety of obstacles to writing and maintaining engineering documentation. To combat these problems, documentation generation can be linked to the process of engineering development. The same graphics and communication tools used for structured system analysis and design (SSA/SSD) also form the basis for the documentation. The goal is to build a living document, such that as an engineering design changes, the documentation will `automatically' revise. `Automatic' is qualified by the need to maintain textual descriptions associated with the SSA/SSD graphics, and the need to generate new documents. This paper describes a methodology and a computer aided system engineering toolset that enables a relatively seamless transition into document generation for the development engineering team.

How to create successful Open Hardware projects — About White Rabbits and open fields

NASA Astrophysics Data System (ADS)

van der Bij, E.; Arruat, M.; Cattin, M.; Daniluk, G.; Gonzalez Cobas, J. D.; Gousiou, E.; Lewis, J.; Lipinski, M. M.; Serrano, J.; Stana, T.; Voumard, N.; Wlostowski, T.

2013-12-01

CERN's accelerator control group has embraced ''Open Hardware'' (OH) to facilitate peer review, avoid vendor lock-in and make support tasks scalable. A web-based tool for easing collaborative work was set up and the CERN OH Licence was created. New ADC, TDC, fine delay and carrier cards based on VITA and PCI-SIG standards were designed and drivers for Linux were written. Often industry was paid for developments, while quality and documentation was controlled by CERN. An innovative timing network was also developed with the OH paradigm. Industry now sells and supports these designs that find their way into new fields.

EHR Documentation: The Hype and the Hope for Improving Nursing Satisfaction and Quality Outcomes.

PubMed

OʼBrien, Ann; Weaver, Charlotte; Settergren, Theresa Tess; Hook, Mary L; Ivory, Catherine H

2015-01-01

The phenomenon of "data rich, information poor" in today's electronic health records (EHRs) is too often the reality for nursing. This article proposes the redesign of nursing documentation to leverage EHR data and clinical intelligence tools to support evidence-based, personalized nursing care across the continuum. The principles consider the need to optimize nurses' documentation efficiency while contributing to knowledge generation. The nursing process must be supported by EHRs through integration of best care practices: seamless workflows that display the right tools, evidence-based content, and information at the right time for optimal clinical decision making. Design of EHR documentation must attain a balance that ensures the capture of nursing's impact on safety, quality, highly reliable care, patient engagement, and satisfaction, yet minimizes "death by data entry." In 2014, a group of diverse informatics leaders from practice, academia, and the vendor community formed to address how best to transform electronic documentation to provide knowledge at the point of care and to deliver value to front line nurses and nurse leaders. As our health care system moves toward reimbursement on the basis of quality outcomes and prevention, the value of nursing data in this business proposition will become a key differentiator for health care organizations' economic success.

Cognitive Process as a Basis for Intelligent Retrieval Systems Design.

ERIC Educational Resources Information Center

Chen, Hsinchun; Dhar, Vasant

1991-01-01

Two studies of the cognitive processes involved in online document-based information retrieval were conducted. These studies led to the development of five computational models of online document retrieval which were incorporated into the design of an "intelligent" document-based retrieval system. Both the system and the broader implications of…

A study on design and development of enterprise-wide concepts for clinical documentation templates.

PubMed

Zhou, Li; Gurjar, Rupali; Regier, Rachel; Morgan, Stephen; Meyer, Theresa; Aroy, Teal; Goldman, Debora Scavone; Hongsermeier, Tonya; Middleton, Blackford

2008-11-06

Structured clinical documents are associated with many potential benefits. Underlying terminologies and structure of information are keys to their successful implementation and use. This paper presents a methodology for design and development of enterprise-wide concepts for clinical documentation templates for an ambulatory Electronic Medical Record (EMR) system.

42 CFR 137.360 - Does the Secretary approve project planning and design documents prepared by the Self-Governance...

Code of Federal Regulations, 2010 CFR

2010-10-01

... design documents prepared by the Self-Governance Tribe? 137.360 Section 137.360 Public Health PUBLIC... HUMAN SERVICES TRIBAL SELF-GOVERNANCE Construction Roles of the Secretary in Establishing and... documents prepared by the Self-Governance Tribe? The Secretary shall have at least one opportunity to...

Deadwood Community Center and Firehall, Deadwood, Oregon. Phase I. Design documentation report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Brown, G. Z.; Kellett, R.; Reynolds, J. S.

1980-01-01

The energy related portions of an architectural design process for a passive solar heating system that directly incorporated the needs, values, and aspirations of the people who will construct and use the buildings are described. The design process and the documentation and evaluation of the final design are presented. (MHR)

Nursing Practices in Catholic Healthcare: A Case Study of Nurses in a Catholic Private Hospital.

PubMed

Edward, Karen-Leigh; Giandinoto, Jo-Ann; Mills, Cally; Kay, Kate

2017-11-07

We aimed to investigate Catholic Identity and Mission communication specifically how nurses were expressing the Catholic healthcare values in practice. A mixed-methods, case study design was used and included non-participant observation, a mid-level manager focus group (n = 7) and online surveys (n = 144). Document and observational data analysis revealed the organisation's commitment to visible indication of Catholic values adherence. Focus group analysis revealed two themes, 'Catholic values in action' and 'taking the extra step'. The impact of Catholic Identity and Mission on nurses and nursing care recipients remains elusive and warrants further understanding.

15 CFR 922.24 - Congressional documents.

Code of Federal Regulations, 2010 CFR

2010-01-01

... MANAGEMENT NATIONAL MARINE SANCTUARY PROGRAM REGULATIONS Designation of National Marine Sanctuaries § 922.24 Congressional documents. In designating a National Marine Sanctuary, the Secretary shall prepare and submit to...

Glossary

MedlinePlus

... healthcare A document that designates the person you trust to make medical decisions on your behalf if ... healthcare: a document that designates the person you trust to make medical decisions on your behalf if ...

A Novel Vector Control Measure to Combat the Spread of Artemisinin Resistance in the Greater Mekong Subregion

DTIC Science & Technology

2017-10-01

Prevention and Disease Control , Department of Disease Control , and obtained permission to perform study (9 May 2017) - Small group discussions with...AWARD NUMBER: W81XWH-16-2-0021 TITLE: A novel vector control measure to combat the spread of artemisinin resistance in the Greater Mekong...s) and should not be construed as an official Department of the Army position, policy or decision unless so designated by other documentation

Security Sector Reform in Liberia: Progress and Challenges Ahead of the United Nations Mission in Liberia (UNMIL) Drawdown

DTIC Science & Technology

2017-06-09

were processed. This program was designed to target a wide variety of combatants, with special emphasis placed on child soldiers. With these...Brzoska, SSR has its origin in the development of donor debate, where there has been ongoing discussion among different groups of theoreticians on how...human rights, humanitarian relief, and electoral reform. This document describes the framework on how post -war Liberia should implement the peace

Proceedings of the 8th US/German Workshop on Salt Repository Research Design and Operation.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hansen, Francis D.; Steininger, Walter; Bollingerfehr, Wilhelm

This document records the Proceedings of the 2017 gathering of salt repository nations. In a spirit of mutual support, technical issues are dissected, led capably by subject matter experts. As before, it is not possible to explore all contemporary issues regarding nuclear waste disposal in salt formations. Instead, the group focused on a few selected issues to be pursued in depth, while at the same time acknowledging and recording ancillary issues.

The NATO thesaurus project

NASA Technical Reports Server (NTRS)

Krueger, Jonathan

1990-01-01

This document describes functionality to be developed to support the NATO technical thesaurus. Described are the specificity of the thesaurus structure and function; the distinction between the thesaurus information and its representation in a given online, machine readable, or printed form; the enhancement of the thesaurus with the assignment of COSATI codes (fields and groups) to posting terms, the integration of DTIC DRIT and NASA thesauri related terminology, translation of posting terms into French; and the provision of a basis for system design.

Evaluation of Nursing Documentation Completion of Stroke Patients in the Emergency Department: A Pre-Post Analysis Using Flowsheet Templates and Clinical Decision Support.

PubMed

Richardson, Karen J; Sengstack, Patricia; Doucette, Jeffrey N; Hammond, William E; Schertz, Matthew; Thompson, Julie; Johnson, Constance

2016-02-01

The primary aim of this performance improvement project was to determine whether the electronic health record implementation of stroke-specific nursing documentation flowsheet templates and clinical decision support alerts improved the nursing documentation of eligible stroke patients in seven stroke-certified emergency departments. Two system enhancements were introduced into the electronic record in an effort to improve nursing documentation: disease-specific documentation flowsheets and clinical decision support alerts. Using a pre-post design, project measures included six stroke management goals as defined by the National Institute of Neurological Disorders and Stroke and three clinical decision support measures based on entry of orders used to trigger documentation reminders for nursing: (1) the National Institutes of Health's Stroke Scale, (2) neurological checks, and (3) dysphagia screening. Data were reviewed 6 months prior (n = 2293) and 6 months following the intervention (n = 2588). Fisher exact test was used for statistical analysis. Statistical significance was found for documentation of five of the six stroke management goals, although effect sizes were small. Customizing flowsheets to meet the needs of nursing workflow showed improvement in the completion of documentation. The effects of the decision support alerts on the completeness of nursing documentation were not statistically significant (likely due to lack of order entry). For example, an order for the National Institutes of Health Stroke Scale was entered only 10.7% of the time, which meant no alert would fire for nursing in the postintervention group. Future work should focus on decision support alerts that trigger reminders for clinicians to place relevant orders for this population.

Basic Electronic Design for Proposed NMSU Hitchhiker Payload

NASA Technical Reports Server (NTRS)

Horan, Stephen

2000-01-01

This document presents the bas'c hardware design developed by the EE 499 class during the spring semester of the 1999-2000 academic year. This design covers the electrical components to supply power to the experiments, the computer software and interfaces to control the experiments, and the ground data processing to provide an operator interface. This document is a follow-on to the Payload Mission description document and the System Requirements document developed during the EE 498 class during the fall semester. The design activities are broken down by functional area within the structure. For each area, we give the requirements that need to be met and the design to meet the requirements. For each of these areas, a prototype selection of hardware and/or software was done by the class and the components assembled as part of the class to verify that they worked as intended.

The effect of electronic health record software design on resident documentation and compliance with evidence-based medicine.

PubMed

Rodriguez Torres, Yasaira; Huang, Jordan; Mihlstin, Melanie; Juzych, Mark S; Kromrei, Heidi; Hwang, Frank S

2017-01-01

This study aimed to determine the role of electronic health record software in resident education by evaluating documentation of 30 elements extracted from the American Academy of Ophthalmology Dry Eye Syndrome Preferred Practice Pattern. The Kresge Eye Institute transitioned to using electronic health record software in June 2013. We evaluated the charts of 331 patients examined in the resident ophthalmology clinic between September 1, 2011, and March 31, 2014, for an initial evaluation for dry eye syndrome. We compared documentation rates for the 30 evidence-based elements between electronic health record chart note templates among the ophthalmology residents. Overall, significant changes in documentation occurred when transitioning to a new version of the electronic health record software with average compliance ranging from 67.4% to 73.6% (p < 0.0005). Electronic Health Record A had high compliance (>90%) in 13 elements while Electronic Health Record B had high compliance (>90%) in 11 elements. The presence of dialog boxes was responsible for significant changes in documentation of adnexa, puncta, proptosis, skin examination, contact lens wear, and smoking exposure. Significant differences in documentation were correlated with electronic health record template design rather than individual resident or residents' year in training. Our results show that electronic health record template design influences documentation across all resident years. Decreased documentation likely results from "mouse click fatigue" as residents had to access multiple dialog boxes to complete documentation. These findings highlight the importance of EHR template design to improve resident documentation and integration of evidence-based medicine into their clinical notes.

Allowing for MSD prevention during facilities planning for a public service: an a posteriori analysis of 10 library design projects.

PubMed

Bellemare, Marie; Trudel, Louis; Ledoux, Elise; Montreuil, Sylvie; Marier, Micheline; Laberge, Marie; Vincent, Patrick

2006-01-01

Research was conducted to identify an ergonomics-based intervention model designed to factor in musculoskeletal disorder (MSD) prevention when library projects are being designed. The first stage of the research involved an a posteriori analysis of 10 recent redesign projects. The purpose of the analysis was to document perceptions about the attention given to MSD prevention measures over the course of a project on the part of 2 categories of employees: librarians responsible for such projects and personnel working in the libraries before and after changes. Subjects were interviewed in focus groups. Outcomes of the analysis can guide our ergonomic assessment of current situations and contribute to a better understanding of the way inclusion or improvement of prevention measures can support the workplace design process.

The General Mission Analysis Tool (GMAT): Current Features And Adding Custom Functionality

NASA Technical Reports Server (NTRS)

Conway, Darrel J.; Hughes, Steven P.

2010-01-01

The General Mission Analysis Tool (GMAT) is a software system for trajectory optimization, mission analysis, trajectory estimation, and prediction developed by NASA, the Air Force Research Lab, and private industry. GMAT's design and implementation are based on four basic principles: open source visibility for both the source code and design documentation; platform independence; modular design; and user extensibility. The system, released under the NASA Open Source Agreement, runs on Windows, Mac and Linux. User extensions, loaded at run time, have been built for optimization, trajectory visualization, force model extension, and estimation, by parties outside of GMAT's development group. The system has been used to optimize maneuvers for the Lunar Crater Observation and Sensing Satellite (LCROSS) and ARTEMIS missions and is being used for formation design and analysis for the Magnetospheric Multiscale Mission (MMS).

Long Duration Exposure Facility Mini-Data Base User`s Guide: Macintosh version. (Diskette)

DOE Office of Scientific and Technical Information (OSTI.GOV)

Bohnhoff-Hlavacek, G.; Pippin, H.G.; Dursch, H.W.

1995-04-01

One of the objectives of the LDEF Special Investigation Group (SIG) was to develop a LDEF data base that identifies the experiment objectives and hardware flown, summarizes results and conclusions, and provides a system analysis overview, including spacecraft design guidelines and space environmental effects. Compiling the information into an easily accessible data base format, and making it available to the space community was a major task accomplished by the System and Materials SIG effort beginning in 1981. Included in this document is a short user`s manual for the LDEF Mini-Data Bases. The user`s manual contains pertinent examples from the datamore » base on specifically how to access and work with the LDEF information. Accompanying this document are the mini-data bases on disk.« less

Inclusion of vulnerable groups in health policies: Regional policies on health priorities in Africa

PubMed Central

Eide, Arne Henning; Amin, Mutamad; MacLachlan, Malcom; Mannan, Hasheem

2013-01-01

Background If access to equitable health care is to be achieved for all, policy documents must mention and address in some detail different needs of groups vulnerable to not accessing such health care. If these needs are not addressed in the policy documents, there is little chance that they will be addressed at the stage of implementation. Objectives This paper reports on an analysis of 11 African Union (AU) policy documents to ascertain the frequency and the extent of mention of 13 core concepts in relation to 12 vulnerable groups, with a specific focus on people with disabilities. Method The paper applied the EquiFrame analytical framework to the 11 AU policy documents. The 11 documents were analysed in terms of how many times a core concept was mentioned and the extent of information on how the core concept should be addressed at the implementation level. Each core concept mention was further analysed in terms of the vulnerable group in referred to. Results The analysis of regional AU policies highlighted the broad nature of the reference made to vulnerable groups, with a lack of detailed specifications of different needs of different groups. This is confirmed in the highest vulnerable group mention being for ‘universal’. The reading of the documents suggests that vulnerable groups are homogeneous in their needs, which is not the case. There is a lack of recognition of different needs of different vulnerable groups in accessing health care. Conclusion The need for more information and knowledge on the needs of all vulnerable groups is evident. The current lack of mention and of any detail on how to address needs of vulnerable groups will significantly impair the access to equitable health care for all. PMID:28729986

NASA-LaRc Flight-Critical Digital Systems Technology Workshop

NASA Technical Reports Server (NTRS)

Meissner, C. W., Jr. (Editor); Dunham, J. R. (Editor); Crim, G. (Editor)

1989-01-01

The outcome is documented of a Flight-Critical Digital Systems Technology Workshop held at NASA-Langley December 13 to 15 1988. The purpose of the workshop was to elicit the aerospace industry's view of the issues which must be addressed for the practical realization of flight-critical digital systems. The workshop was divided into three parts: an overview session; three half-day meetings of seven working groups addressing aeronautical and space requirements, system design for validation, failure modes, system modeling, reliable software, and flight test; and a half-day summary of the research issues presented by the working group chairmen. Issues that generated the most consensus across the workshop were: (1) the lack of effective design and validation methods with support tools to enable engineering of highly-integrated, flight-critical digital systems, and (2) the lack of high quality laboratory and field data on system failures especially due to electromagnetic environment (EME).

Designing a visualization system for hydrological data

NASA Astrophysics Data System (ADS)

Fuhrmann, Sven

2000-02-01

The field of hydrology is, as any other scientific field, strongly affected by a massive technological evolution. The spread of modern information and communication technology within the last three decades has led to an increased collection, availability and use of spatial and temporal digital hydrological data. In a two-year research period a working group in Muenster applied and developed methods for the visualization of digital hydrological data and the documentation of hydrological models. A low-cost multimedial, hydrological visualization system (HydroVIS) for the Weser river catchment was developed. The research group designed HydroVIS under freeware constraints and tried to show what kind of multimedia visualization techniques can be effectively used with a nonprofit hydrological visualization system. The system's visual components include features such as electronic maps, temporal and nontemporal cartographic animations, the display of geologic profiles, interactive diagrams and hypertext, including photographs and tables.

Comparison of Grouping Methods for Template Extraction from VA Medical Record Text.

PubMed

Redd, Andrew M; Gundlapalli, Adi V; Divita, Guy; Tran, Le-Thuy; Pettey, Warren B P; Samore, Matthew H

2017-01-01

We investigate options for grouping templates for the purpose of template identification and extraction from electronic medical records. We sampled a corpus of 1000 documents originating from Veterans Health Administration (VA) electronic medical record. We grouped documents through hashing and binning tokens (Hashed) as well as by the top 5% of tokens identified as important through the term frequency inverse document frequency metric (TF-IDF). We then compared the approaches on the number of groups with 3 or more and the resulting longest common subsequences (LCSs) common to all documents in the group. We found that the Hashed method had a higher success rate for finding LCSs, and longer LCSs than the TF-IDF method, however the TF-IDF approach found more groups than the Hashed and subsequently more long sequences, however the average length of LCSs were lower. In conclusion, each algorithm appears to have areas where it appears to be superior.

On the typography of flight-deck documentation

NASA Technical Reports Server (NTRS)

Degani, Asaf

1992-01-01

Many types of paper documentation are employed on the flight-deck. They range from a simple checklist card to a bulky Aircraft Flight Manual (AFM). Some of these documentations have typographical and graphical deficiencies; yet, many cockpit tasks such as conducting checklists, way-point entry, limitations and performance calculations, and many more, require the use of these documents. Moreover, during emergency and abnormal situations, the flight crews' effectiveness in combating the situation is highly dependent on such documentation; accessing and reading procedures has a significant impact on flight safety. Although flight-deck documentation are an important (and sometimes critical) form of display in the modern cockpit, there is a dearth of information on how to effectively design these displays. The object of this report is to provide a summary of the available literature regarding the design and typographical aspects of printed matter. The report attempts 'to bridge' the gap between basic research about typography, and the kind of information needed by designers of flight-deck documentation. The report focuses on typographical factors such as type-faces, character height, use of lower- and upper-case characters, line length, and spacing. Some graphical aspects such as layout, color coding, fonts, and character contrast are also discussed. In addition, several aspects of cockpit reading conditions such as glare, angular alignment, and paper quality are addressed. Finally, a list of recommendations for the graphical design of flight-deck documentation is provided.

40 CFR 265.1090 - Recordkeeping requirements.

Code of Federal Regulations, 2010 CFR

2010-07-01

... applicable to the facility. Except for air emission control equipment design documentation and information... the operating record for a minimum of 3 years. Air emission control equipment design documentation... explain: How use of the required air emission controls on the tanks would affect the tank design features...

Human Factors Checklist for the Design and Evaluation of Air Traffic Control Systems

DOT National Transportation Integrated Search

1995-04-01

This document presents human factors issues that should bo considered in tho : design and evaluation of air traffic control (ATC! systoms and subsystems. Tho : checklist is a companion document to Human Factors in tho Design and Evaluation of : Air T...

40 CFR 264.1089 - Recordkeeping requirements.

Code of Federal Regulations, 2010 CFR

2010-07-01

... facility. Except for air emission control equipment design documentation and information required by... record for a minimum of 3 years. Air emission control equipment design documentation shall be maintained... the owner or operator stating that the control device is designed to operate at the performance level...

40 CFR 265.1090 - Recordkeeping requirements.

Code of Federal Regulations, 2011 CFR

2011-07-01

... applicable to the facility. Except for air emission control equipment design documentation and information... the operating record for a minimum of 3 years. Air emission control equipment design documentation... explain: How use of the required air emission controls on the tanks would affect the tank design features...

40 CFR 264.1089 - Recordkeeping requirements.

Code of Federal Regulations, 2012 CFR

2012-07-01

... facility. Except for air emission control equipment design documentation and information required by... record for a minimum of 3 years. Air emission control equipment design documentation shall be maintained... the owner or operator stating that the control device is designed to operate at the performance level...

40 CFR 264.1089 - Recordkeeping requirements.

Code of Federal Regulations, 2011 CFR

2011-07-01

... facility. Except for air emission control equipment design documentation and information required by... record for a minimum of 3 years. Air emission control equipment design documentation shall be maintained... the owner or operator stating that the control device is designed to operate at the performance level...

40 CFR 265.1090 - Recordkeeping requirements.

Code of Federal Regulations, 2012 CFR

2012-07-01

... applicable to the facility. Except for air emission control equipment design documentation and information... the operating record for a minimum of 3 years. Air emission control equipment design documentation... explain: How use of the required air emission controls on the tanks would affect the tank design features...

National evaluation of the benefits and risks of greater structuring and coding of the electronic health record: exploratory qualitative investigation.

PubMed

Morrison, Zoe; Fernando, Bernard; Kalra, Dipak; Cresswell, Kathrin; Sheikh, Aziz

2014-01-01

We aimed to explore stakeholder views, attitudes, needs, and expectations regarding likely benefits and risks resulting from increased structuring and coding of clinical information within electronic health records (EHRs). Qualitative investigation in primary and secondary care and research settings throughout the UK. Data were derived from interviews, expert discussion groups, observations, and relevant documents. Participants (n=70) included patients, healthcare professionals, health service commissioners, policy makers, managers, administrators, systems developers, researchers, and academics. Four main themes arose from our data: variations in documentation practice; patient care benefits; secondary uses of information; and informing and involving patients. We observed a lack of guidelines, co-ordination, and dissemination of best practice relating to the design and use of information structures. While we identified immediate benefits for direct care and secondary analysis, many healthcare professionals did not see the relevance of structured and/or coded data to clinical practice. The potential for structured information to increase patient understanding of their diagnosis and treatment contrasted with concerns regarding the appropriateness of coded information for patients. The design and development of EHRs requires the capture of narrative information to reflect patient/clinician communication and computable data for administration and research purposes. Increased structuring and/or coding of EHRs therefore offers both benefits and risks. Documentation standards within clinical guidelines are likely to encourage comprehensive, accurate processing of data. As data structures may impact upon clinician/patient interactions, new models of documentation may be necessary if EHRs are to be read and authored by patients.

National evaluation of the benefits and risks of greater structuring and coding of the electronic health record: exploratory qualitative investigation

PubMed Central

Morrison, Zoe; Fernando, Bernard; Kalra, Dipak; Cresswell, Kathrin; Sheikh, Aziz

2014-01-01

Objective We aimed to explore stakeholder views, attitudes, needs, and expectations regarding likely benefits and risks resulting from increased structuring and coding of clinical information within electronic health records (EHRs). Materials and methods Qualitative investigation in primary and secondary care and research settings throughout the UK. Data were derived from interviews, expert discussion groups, observations, and relevant documents. Participants (n=70) included patients, healthcare professionals, health service commissioners, policy makers, managers, administrators, systems developers, researchers, and academics. Results Four main themes arose from our data: variations in documentation practice; patient care benefits; secondary uses of information; and informing and involving patients. We observed a lack of guidelines, co-ordination, and dissemination of best practice relating to the design and use of information structures. While we identified immediate benefits for direct care and secondary analysis, many healthcare professionals did not see the relevance of structured and/or coded data to clinical practice. The potential for structured information to increase patient understanding of their diagnosis and treatment contrasted with concerns regarding the appropriateness of coded information for patients. Conclusions The design and development of EHRs requires the capture of narrative information to reflect patient/clinician communication and computable data for administration and research purposes. Increased structuring and/or coding of EHRs therefore offers both benefits and risks. Documentation standards within clinical guidelines are likely to encourage comprehensive, accurate processing of data. As data structures may impact upon clinician/patient interactions, new models of documentation may be necessary if EHRs are to be read and authored by patients. PMID:24186957

Information findability: An informal study to explore options for improving information findability for the systems analysis group

DOE Office of Scientific and Technical Information (OSTI.GOV)

Stoecker, Nora Kathleen

2014-03-01

A Systems Analysis Group has existed at Sandia National Laboratories since at least the mid-1950s. Much of the groups work output (reports, briefing documents, and other materials) has been retained, along with large numbers of related documents. Over time the collection has grown to hundreds of thousands of unstructured documents in many formats contained in one or more of several different shared drives or SharePoint sites, with perhaps five percent of the collection still existing in print format. This presents a challenge. How can the group effectively find, manage, and build on information contained somewhere within such a large setmore » of unstructured documents? In response, a project was initiated to identify tools that would be able to meet this challenge. This report documents the results found and recommendations made as of August 2013.« less

The Nature of the Arguments for Creationism, Intelligent Design, and Evolution

ERIC Educational Resources Information Center

Barnes, Ralph M.; Church, Rebecca A.; Draznin-Nagy, Samuel

2017-01-01

Seventy-two Internet documents promoting creationism, intelligent design (I.D.), or evolution were selected for analysis. The primary goal of each of the 72 documents was to present arguments for creationism, I.D., or evolution. We first identified all arguments in these documents. Each argument was then coded in terms of both argument type…

US Army Research Laboratory Visualization Framework Architecture Document

DTIC Science & Technology

2018-01-11

this report are not to be construed as an official Department of the Army position unless so designated by other authorized documents. Citation of...release; distribution is unlimited. 14. ABSTRACT Visualization of network science experimentation results is generally achieved using stovepipe...report documents the ARL Visualization Framework system design and specific details of its implementation. 15. SUBJECT TERMS visualization

Technical Assistance and Training from the Document Design Project. Final Report.

ERIC Educational Resources Information Center

American Institutes for Research, Washington, DC.

Contained in this report is a description of the technical assistance and training phase of the Document Design Project, a program funded by the National Institute of Education and intended to address and correct the readability problems posed by public documents. The first section of the report provides background material on the assistance and…

Issues in Designing a Hypermedia Document System: The Intermedia Case Study.

ERIC Educational Resources Information Center

Yankelovich, Nicole; And Others

1986-01-01

Intermedia, a hypermedia system developed at Brown University's Institute for Research (Rhode Island) in Information and Scholarship, is first described, and then used as a case study to explore a number of key issues that software designers must consider in the development of hypermedia document systems. A hypermedia document system is defined as…

Canister Storage Building (CSB) Design Basis Accident Analysis Documentation

DOE Office of Scientific and Technical Information (OSTI.GOV)

CROWE, R.D.; PIEPHO, M.G.

2000-03-23

This document provided the detailed accident analysis to support HNF-3553, Spent Nuclear Fuel Project Final Safety Analysis Report, Annex A, ''Canister Storage Building Final Safety Analysis Report''. All assumptions, parameters, and models used to provide the analysis of the design basis accidents are documented to support the conclusions in the Canister Storage Building Final Safety Analysis Report.

Strategies for increasing house staff management of cholesterol with inpatients.

PubMed

Boekeloo, B O; Becker, D M; Levine, D M; Belitsos, P C; Pearson, T A

1990-01-01

This study tested the effectiveness of two conceptually different chart audit-based approaches to modifying physicians' clinical practices to conform with quality-assurance standards. The objective was to increase intern utilization of cholesterol management opportunities in the inpatient setting. Using a clinical trial study design, 29 internal medicine interns were randomly assigned to four intervention groups identified by the intervention they received: control, reminder checklists (checklists), patient-specific feedback (feedback), or both interventions (combined). Over a nine-month period, intern management of high blood cholesterol levels in internal medicine inpatients (n = 459) was monitored by postdischarge chart audit. During both a baseline and subsequent intervention period, interns documented significantly more cholesterol management for inpatients with coronary artery disease (CAD) than without CAD. During baseline, 27.3%, 24.3%, 21.7%, 12.4%, 5.4%, and 2.7% of all inpatient charts had intern documentation concerning a low-fat hospital diet, cholesterol history, screening blood cholesterol level assessment, follow-up lipid profile, nutritionist consult, and preventive cardiology consult, respectively. The feedback intervention significantly increased overall intern-documented cholesterol management among inpatients with CAD. The checklists significantly decreased overall intern-documented cholesterol management. Feedback appears to be an effective approach to increasing intern cholesterol management in inpatients.

Building a Digital Library from the Ground Up: an Examination of Emergent Information Resources in the Machine Learning Community

NASA Astrophysics Data System (ADS)

Cunningham, Sally Jo

The current crop of digital libraries for the computing community are strongly grounded in the conventional library paradigm: they provide indexes to support searching of collections of research papers. As such, these digital libraries are relatively impoverished; the present computing digital libraries omit many of the documents and resources that are currently available to computing researchers, and offer few browsing structures. These computing digital libraries were built 'top down': the resources and collection contents are forced to fit an existing digital library architecture. A 'bottom up' approach to digital library development would begin with an investigation of a community's information needs and available documents, and then design a library to organize those documents in such a way as to fulfill the community's needs. The 'home grown', informal information resources developed by and for the machine learning community are examined as a case study, to determine the types of information and document organizations 'native' to this group of researchers. The insights gained in this type of case study can be used to inform construction of a digital library tailored to this community.

Role of standard documents in advancing the standardization of microfluidics connectors

NASA Astrophysics Data System (ADS)

Tantra, Ratna; van Heeren, Henne; Jarman, John

2016-04-01

An emerging trend within the microfluidic community is to standardize common parts in order to facilitate design and production activities. The goal is clear: to enhance interoperability and promote plug-and-play. A recent launch of a pan-European project, Microfluidic (MF) Manufacturing, has identified an item that is in immediate need of standardization: having in place geometrical specifications for MF connectors. In order to accelerate the adoption of such standards, there is a need to consider the pivotal role of standard documents. The purpose of this paper is to provide background information on document standards development. In addition, the future implications related to the MF manufacturing project will be discussed. A strengths, weaknesses, opportunities, and threats analysis has been carried out to identify points of action. The findings show that although there is a need to publish under International Organization for Standardization (ISO), the actual realization of a full ISO standard document is not feasible. The recommendation is to initially publish via an ISO Workshop Agreement. Parallel to such activity, there is a need to encourage stakeholders help kick start a currently dormant working group that supports microfluidics under ISO to help pave the way for future standardization activities in the microfluidics community.

The effects of focused attention training (FOCAL) on the duration of novice drivers' glances inside the vehicle

PubMed Central

Pradhan, A.K.; Divekar, G.; Masserang, K.; Romoser, M.; Zafian, T.; Blomberg, R.D.; Thomas, F.D.; Reagan, I.; Knodler, M.; Pollatsek, A.; Fisher, D.L.

2011-01-01

Several studies have documented that the failure of drivers to attend to the forward roadway for a period lasting longer than 2-3 seconds is a major cause of highway crashes. Moreover, several studies have demonstrated that novice drivers are more likely to glance away from the roadway than experienced drivers for extended periods when attempting to do a task inside the vehicle. The present study examines the efficacy of a PC-based training program (FOCAL) designed to teach novice drivers not to glance away for these extended periods of time. A FOCAL-trained group was compared to a placebo-trained group in an on-road test, and the FOCAL-trained group made significantly fewer glances away from the roadway that were more than 2 seconds than the placebo-trained group. Other measures indicated an advantage for the FOCAL-trained group as well. PMID:21973003

Cold Vacuum Drying facility civil structural system design description (SYS 06)

DOE Office of Scientific and Technical Information (OSTI.GOV)

PITKOFF, C.C.

This document describes the Cold Vacuum Drying (CVD) Facility civil - structural system. This system consists of the facility structure, including the administrative and process areas. The system's primary purpose is to provide for a facility to house the CVD process and personnel and to provide a tertiary level of containment. The document provides a description of the facility and demonstrates how the design meets the various requirements imposed by the safety analysis report and the design requirements document.

Computer system design description for SY-101 hydrogen mitigation test project data acquisition and control system (DACS-1)

DOE Office of Scientific and Technical Information (OSTI.GOV)

Ermi, A.M.

1997-05-01

Description of the Proposed Activity/REPORTABLE OCCURRENCE or PIAB: This ECN changes the computer systems design description support document describing the computers system used to control, monitor and archive the processes and outputs associated with the Hydrogen Mitigation Test Pump installed in SY-101. There is no new activity or procedure associated with the updating of this reference document. The updating of this computer system design description maintains an agreed upon documentation program initiated within the test program and carried into operations at time of turnover to maintain configuration control as outlined by design authority practicing guidelines. There are no new crediblemore » failure modes associated with the updating of information in a support description document. The failure analysis of each change was reviewed at the time of implementation of the Systems Change Request for all the processes changed. This document simply provides a history of implementation and current system status.« less

Optimising adherence to childhood pneumonia treatment: the design and development of patient instructions and a job aid for amoxicillin dispersible tablets.

PubMed

Ebels, Kelly; Faulx, Dunia; Gerth-Guyette, Emily; Murunga, Peninah; Mahapatro, Samarendra; Das, Manoja Kumar; Ginsburg, Amy Sarah

2016-01-01

Pneumonia is the leading cause of death from infection in children worldwide. Despite global treatment recommendations that call for children with pneumonia to receive amoxicillin dispersible tablets, only one-third of children with pneumonia receive any antibiotics and many do not complete the full course of treatment. Poor adherence to antibiotics may be driven in part by a lack of user-friendly treatment instructions. In order to optimise childhood pneumonia treatment adherence at the community level, we developed a user-friendly product presentation for caregivers and a job aid for healthcare providers (HCPs). This paper aims to document the development process and offers a model for future health communication tools. We employed an iterative design process that included document review, key stakeholder interviews, engagement with a graphic designer and pre-testing design concepts among target users in India and Kenya. The consolidated criteria for reporting qualitative research were used in the description of results. Though resources for pneumonia treatment are available in some countries, their content is incomplete and inconsistent with global recommendations. Document review and stakeholder interviews provided the information necessary to convey to caregivers and recommendations for how to present this information. Target users in India and Kenya confirmed the need to support better treatment adherence, recommended specific modifications to design concepts and suggested the development of a companion job aid. There was a consensus among caregivers and HCPs that these tools would be helpful and improve adherence behaviours. The development of user-friendly instructions for medications for use in low-resource settings is a critically important but time-intensive and resource-intensive process that should involve engagement with target audiences. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://www.bmj.com/company/products-services/rights-and-licensing/

Lessons learned: clinicians' post-occupancy perspective of facility design involvement.

PubMed

Reno, Kathy; Okland, Kathy; Finis, Nanne; Lamantia, Gina; Call, Roger; Cardon, Kerrie; Gerber, Deborah; Zeigler, Janet

2014-01-01

The research was conducted to determine clinician knowledge needs for competent involvement with the facility design process as well as to gather lessons learned on building stronger design teams. As clinical stakeholders are invited to the healthcare facility design table, the question arises as to the ability of professionally diverse team members to translate each other's comments and ideas accurately. In the past, hospitals were designed by a handful of hospital leaders and architects. More recently, multiple players have become involved throughout the design and construction of new healthcare facilities. Clinical consultants from two international healthcare companies observed that many clinicians were unprepared to effectively translate their needs to the architectural community or to competently utilize architectural tools and documents. A qualitative, post-occupancy cross-case study was conducted to understand how clinicians could increase their competencies for successful involvement in facility design. Focus group interviews were held with teams from healthcare facilities occupying their new facility for more than 6 months and less than 2 years. Curriculum topics were validated and additional areas recommended based on the interviews. Open-ended questioins on lessons learned provided several new dimensions to the research. Although validating the curriculum was the initial intent, the feedback from the focus groups on lessons learned provided rich concepts for practice implications and further research on post-occupancy. Decision-making, design process, interdisciplinary, planning, post-occupancy.

Smart roadside initiative : system design document.

DOT National Transportation Integrated Search

2015-09-01

This document describes the software design for the Smart Roadside Initiative (SRI) for the delivery of capabilities related to wireless roadside inspections, electronic screening/virtual weigh stations, universal electronic commercial vehicle identi...

Marketing of menthol cigarettes and consumer perceptions: a review of tobacco industry documents

PubMed Central

2011-01-01

Objective To examine tobacco industry marketing of menthol cigarettes and to determine what the tobacco industry knew about consumer perceptions of menthol. Methods A snowball sampling design was used to systematically search the Legacy Tobacco Documents Library (LTDL) (http://legacy.library.ucsf.edu) between 28 February and 27 April 2010. Of the approximately 11 million documents available in the LTDL, the iterative searches returned tens of thousands of results from the major US tobacco companies and affiliated organisations. A collection of 953 documents from the 1930s to the first decade of the 21st century relevant to 1 or more of the research questions were qualitatively analysed, as follows: (1) are/were menthol cigarettes marketed with health reassurance messages? (2) What other messages come from menthol cigarette advertising? (3) How do smokers view menthol cigarettes? (4) Were menthol cigarettes marketed to specific populations? Results Menthol cigarettes were marketed as, and are perceived by consumers to be, healthier than non-menthol cigarettes. Menthol cigarettes are also marketed to specific social and demographic groups, including African–Americans, young people and women, and are perceived by consumers to signal social group belonging. Conclusions The tobacco industry knew consumers perceived menthol as healthier than non-menthol cigarettes, and this was the intent behind marketing. Marketing emphasising menthol attracts consumers who may not otherwise progress to regular smoking, including young, inexperienced users and those who find ‘regular’ cigarettes undesirable. Such marketing may also appeal to health-concerned smokers who might otherwise quit. PMID:21504928

Introduction to United States Public Documents.

ERIC Educational Resources Information Center

Morehead, Joseph

This textbook, designed for use in library school government documents courses, provides an overview of the functions and characteristics of United States public documents. Chapters cover the Government Printing Office, the Superintendent of Documents, the depository library system, administration of documents collections, general guides to…

NLS Flight Simulation Laboratory (FSL) documentation

NASA Technical Reports Server (NTRS)

1995-01-01

The Flight Simulation Laboratory (FSL) Electronic Documentation System design consists of modification and utilization of the MSFC Integrated Engineering System (IES), translation of the existing FSL documentation to an electronic format, and generation of new drawings to represent the Engine Flight Simulation Laboratory design and implementation. The intent of the electronic documentation is to provide ease of access, local print/plot capabilities, as well as the ability to correct and/or modify the stored data by network users who are authorized to access this information.

Wake Turbulence Mitigation for Departures (WTMD) Prototype System - Software Design Document

NASA Technical Reports Server (NTRS)

Sturdy, James L.

2008-01-01

This document describes the software design of a prototype Wake Turbulence Mitigation for Departures (WTMD) system that was evaluated in shadow mode operation at the Saint Louis (KSTL) and Houston (KIAH) airports. This document describes the software that provides the system framework, communications, user displays, and hosts the Wind Forecasting Algorithm (WFA) software developed by the M.I.T. Lincoln Laboratory (MIT-LL). The WFA algorithms and software are described in a separate document produced by MIT-LL.

Crew Health Care System (CHeCS) Design Research, Documentations, and Evaluations

NASA Technical Reports Server (NTRS)

CLement, Bethany M.

2011-01-01

The Crew Health Care System (CHeCS) is a group within the Space Life Science Directorate (SLSD) that focuses on the overall health of astronauts by reinforcing the three divisions - the Environmental Maintenance System (EMS), the Countermeasures System (CMS), and the Health Maintenance System (HMS). This internship provided opportunity to gain knowledge, experience, and skills in CHeCS engineering and operations tasks. Various and differing tasks allowed for occasions to work independently, network to get things done, and show leadership abilities. Specific exercises included reviewing hardware certification, operations, and documentation within the ongoing Med Kit Redesign (MKR) project, and learning, writing, and working various common pieces of paperwork used in the engineering and design process. Another project focused on the distribution of various pieces of hardware to off-site research facilities with an interest in space flight health care. The main focus of this internship, though, was on a broad and encompassing understanding of the engineering process as time was spent looking at each individual step in a variety of settings and tasks.

Shuttle unified navigation filter, revision 1

NASA Technical Reports Server (NTRS)

Muller, E. S., Jr.

1973-01-01

Equations designed to meet the navigation requirements of the separate shuttle mission phases are presented in a series of reports entitled, Space Shuttle GN and C Equation Document. The development of these equations is based on performance studies carried out for each particular mission phase. Although navigation equations have been documented separately for each mission phase, a single unified navigation filter design is embodied in these separate designs. The purpose of this document is to present the shuttle navigation equations in a form in which they would most likely be coded-as the single unified navigation filter used in each mission phase. This document will then serve as a single general reference for the navigation equations replacing each of the individual mission phase navigation documents (which may still be used as a description of a particular navigation phase).

Precise Documentation: The Key to Better Software

NASA Astrophysics Data System (ADS)

Parnas, David Lorge

The prime cause of the sorry “state of the art” in software development is our failure to produce good design documentation. Poor documentation is the cause of many errors and reduces efficiency in every phase of a software product's development and use. Most software developers believe that “documentation” refers to a collection of wordy, unstructured, introductory descriptions, thousands of pages that nobody wanted to write and nobody trusts. In contrast, Engineers in more traditional disciplines think of precise blueprints, circuit diagrams, and mathematical specifications of component properties. Software developers do not know how to produce precise documents for software. Software developments also think that documentation is something written after the software has been developed. In other fields of Engineering much of the documentation is written before and during the development. It represents forethought not afterthought. Among the benefits of better documentation would be: easier reuse of old designs, better communication about requirements, more useful design reviews, easier integration of separately written modules, more effective code inspection, more effective testing, and more efficient corrections and improvements. This paper explains how to produce and use precise software documentation and illustrate the methods with several examples.

Learning physics: A comparative analysis between instructional design methods

NASA Astrophysics Data System (ADS)

Mathew, Easow

The purpose of this research was to determine if there were differences in academic performance between students who participated in traditional versus collaborative problem-based learning (PBL) instructional design approaches to physics curricula. This study utilized a quantitative quasi-experimental design methodology to determine the significance of differences in pre- and posttest introductory physics exam performance between students who participated in traditional (i.e., control group) versus collaborative problem solving (PBL) instructional design (i.e., experimental group) approaches to physics curricula over a college semester in 2008. There were 42 student participants (N = 42) enrolled in an introductory physics course at the research site in the Spring 2008 semester who agreed to participate in this study after reading and signing informed consent documents. A total of 22 participants were assigned to the experimental group (n = 22) who participated in a PBL based teaching methodology along with traditional lecture methods. The other 20 students were assigned to the control group (n = 20) who participated in the traditional lecture teaching methodology. Both the courses were taught by experienced professors who have qualifications at the doctoral level. The results indicated statistically significant differences (p < .01) in academic performance between students who participated in traditional (i.e., lower physics posttest scores and lower differences between pre- and posttest scores) versus collaborative (i.e., higher physics posttest scores, and higher differences between pre- and posttest scores) instructional design approaches to physics curricula. Despite some slight differences in control group and experimental group demographic characteristics (gender, ethnicity, and age) there were statistically significant (p = .04) differences between female average academic improvement which was much higher than male average academic improvement (˜63%) in the control group which may indicate that traditional teaching methods are more effective in females, whereas there was no significant difference noted in the experimental group between male and female participants. There was a statistically significant and negative relationship (r = -.61, p = .01) between age and physics pretest scores in the control group. No statistical analyses yielded significantly different average academic performance values in either group as delineated by ethnicity.

78 FR 19797 - Designation & Determination Pursuant to the Foreign Missions Act; Concerning the Provision of...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-04-02

... DEPARTMENT OF STATE [Public Notice 8266] Designation & Determination Pursuant to the Foreign Missions Act; Concerning the Provision of Application Services for Visas, Passports and Similar Documents... designate the provision of application services with respect to visas, passports and similar documents by...

Design and Construction Documents Associated with N232, Sustainability Base

NASA Technical Reports Server (NTRS)

Zornetzer, Steven F.; Schuler, Raymond F.; Grymes, Rosalind A.

2014-01-01

This request comprehensively covers documents associated with the design and construction of Sustainability Base, N232. The intent of this project specifically envisioned broad dissemination of these materials to others undertaking the design and construction of high-performing energy- and resource-efficient buildings in comparable climate zones.

An Analysis of Document Category Prediction Responses to Classifier Model Parameter Treatment Permutations within the Software Design Patterns Subject Domain

ERIC Educational Resources Information Center

Pankau, Brian L.

2009-01-01

This empirical study evaluates the document category prediction effectiveness of Naive Bayes (NB) and K-Nearest Neighbor (KNN) classifier treatments built from different feature selection and machine learning settings and trained and tested against textual corpora of 2300 Gang-Of-Four (GOF) design pattern documents. Analysis of the experiment's…

Prototype development and demonstration for response, emergency staging, communications, uniform management, and evacuation (R.E.S.C.U.M.E.) : R.E.S.C.U.M.E. prototype system design document.

DOT National Transportation Integrated Search

2014-04-01

This report documents the System Design Document (SDD) for the prototype development and demonstration of the Response, Emergency Staging, Communications, Uniform Management, and Evacuation (R.E.S.C.U.M.E.) application bundle, with a focus on the Inc...

NASA Battery Working Group - 2007-2008: Battery Task Summary Report

NASA Technical Reports Server (NTRS)

Manzo, Michelle

2008-01-01

This presentation provides a summary of the 2007-2008 NASA Battery Working Group efforts completed in support of the NASA Engineering Safety Center (NESC). The effort covered a series of pro-active tasks that address the following: Binding Procurements -- guidelines related to requirements for the battery system that should be considered at the time of contract award Wet Life of Ni-H2 Batteries -- issues/strategies for effective storage and impact of long-term storage on performance and life Generic Guidelines for Lithium-ion Safety, Handling and Qualification -- Standardized approaches developed and risk assessments (1) Lithium-ion Performance Assessment -- survey of manufacturers and capabilities to meet mission needs. Guidelines document generated (2) Conditions Required for using Pouch Cells in Aerospace Missions -- focus on corrosion, thermal excursions and long-term performance issues. Document defining requirements to maintain performance and life (3) High Voltage Risk Assessment -- focus on safety and abuse tolerance of battery module assemblies. Recommendations of features required for safe implementation (4) Procedure for Determination of Safe Charge Rates -- evaluation of various cell chemistries and recommendation of safe operating regimes for specific cell designs

Effectiveness guidance document (EGD) for Chinese medicine trials: a consensus document

PubMed Central

2014-01-01

Background There is a need for more Comparative Effectiveness Research (CER) on Chinese medicine (CM) to inform clinical and policy decision-making. This document aims to provide consensus advice for the design of CER trials on CM for researchers. It broadly aims to ensure more adequate design and optimal use of resources in generating evidence for CM to inform stakeholder decision-making. Methods The Effectiveness Guidance Document (EGD) development was based on multiple consensus procedures (survey, written Delphi rounds, interactive consensus workshop, international expert review). To balance aspects of internal and external validity, multiple stakeholders, including patients, clinicians, researchers and payers were involved in creating this document. Results Recommendations were developed for “using available data” and “future clinical studies”. The recommendations for future trials focus on randomized trials and cover the following areas: designing CER studies, treatments, expertise and setting, outcomes, study design and statistical analyses, economic evaluation, and publication. Conclusion The present EGD provides the first systematic methodological guidance for future CER trials on CM and can be applied to single or multi-component treatments. While CONSORT statements provide guidelines for reporting studies, EGDs provide recommendations for the design of future studies and can contribute to a more strategic use of limited research resources, as well as greater consistency in trial design. PMID:24885146

Documentation of limitation of medical therapy at the time of a rapid response team call.

PubMed

Sundararajan, K; Flabouris, A; Keeshan, Alexander; Cramey, Tracey

2014-05-01

The aims of the present study were to: (1) describe the documentation process of limitation of medical therapy (LMT) orders at the time of a rapid response team (RRT) call; and (2) compare documented LMT orders not associated with an RRT call (control, Group 1) with LMT orders documented at the time of an RRT call (Group 2). A descriptive study, over a 6-month period (February-August 2011), involving the review of the medical records of patients prospectively identified as either Group 1 or Group 2. There were 994 RRT calls; of these, 50 patients (5%) had an LMT order documented by the RRT. A cardiac arrest was the trigger for the RRT for six patients (12%). Patients in Group 1 (n=50) and Group 2 were of similar median age (80.5 vs 78.5 years; P=0.30), LMTs were recorded at a similar time of day (15:30 vs 15:55 hours; P=0.52) and day of the week (weekend: 32% vs 35%; P=0.72). Comparing group 2 with Group 1, the RRT was less likely to document a not-for-resuscitation (NFR; 31 (62%) vs 49 (98%); P<0.01) or a not-for-ICU (NFICU; 18 (36%) vs 41 (82%); P<0.01) order, but more likely to document a not-for-RRT call (NFRRT; 31 (62%) vs 22 (44%); P=0.04) and modified RRT calling criteria (MRRT; 4 (8%) vs 0 (0%); P=0.04) orders. For Group 2 compared with Group 1 orders, involvement of the patient in the decision making process (9 (18%) vs 25 (50%); P<0.01) or the next of kin (29 (58%) vs 45 (90%); P<0.01) was documented less often. Documentation of LMT orders at the time of an RRT call is less likely to include documented involvement of patients or their next of kin, and is more likely to be an NFRRT or MRRT order. These findings have implications for overall clinical governance. What is known about the topic? RRT are not infrequently involved in documenting LMT orders. What does this paper add? This is the first study in Australasia to look into the timing and circumstances surrounding the issuing of a NFR order during an RRT call. The study findings clarify the type of LMT orders documented by RRT and to what extent patients, their carers and senior medical staff are involved. What are the implications for practitioners? Our findings indicate that, in the setting of a rapid response system, there is a need to consider beyond the narrow interpretation of the NFR order, when a NFRRT may also be appropriate. This will require standardisation of such nomenclature, and training and education of those involved in documenting and interpreting such orders. Equally, it will require a different approach to the discussion with patients and their carers as to what the implications of an NFRRT order are. The findings also have significant implications as to the senior medical oversight of LMT, in particular for RRT, for whom it is their first encounter with such patients. Finally, the findings suggest that consideration be given to better delineating the documentation of the role of nursing staff when setting LMT orders.

Exploration of the perceptions of emergency physicians and interns regarding the medical documentation practices of interns.

PubMed

Isoardi, Jonathon; Spencer, Lyndall; Sinnott, Michael; Nicholls, Kim; O'Connor, Angela; Jones, Fleur

2013-08-01

The primary objective of the present study was to learn the factors that influence the documentation practices of ED interns. A second objective was to identify the expectations of emergency physicians (EPs) towards the medical record documentation of ED interns. A qualitative design was adopted using semi-structured interviews in convenience samples drawn from both groups. Eighteen interviews were conducted with intern volunteers and 10 with EP volunteers. One (5%) intern and two (20%) EPs had received medical documentation training. Factors that encouraged interns' documentation included: patient acuity (the more critical the condition, the more comprehensive the documentation) and the support of senior colleagues. Inhibiting factors included uncertainty about how much to write, and the shift being worked (interns indicated they wrote less at night). Factors of consequence to senior personnel included the apparent reluctance of interns to document management plans. They noted that interns frequently confine their notes to assessment, investigations and treatments, whereas EPs preferred records that demonstrated intern thought processes and included such matters as future actions to follow immediate treatment. A positive theme that emerged included the high level of support interns received from their senior colleagues. Another theme, the influence of patient acuity, held both positive and negative implications for intern writing practices. The lack of formal training is an impediment to the production of useful medical records by ED interns. One solution proposed by both interns and senior personnel was the introduction of the subject into intern education programmes. © 2013 Australasian College for Emergency Medicine and Australasian Society for Emergency Medicine.

Identification of Novel Drug Targets and Lead Compounds for Advanced Prostate Cancer through Genomic and Cheminformatic Analyses

DTIC Science & Technology

2016-10-01

regular group meetings and attended bi- weekly journal clubs at VPC. During the course of the two year period, I have presented the research project...DATE: October 2016 TYPE OF REPORT: Final PREPARED FOR: U.S. Army Medical Research and Materiel Command Fort Detrick, Maryland 21702-5012...author(s) and should not be construed as an official Department of the Army position, policy or decision unless so designated by other documentation

Integrated IMA (Information Mission Areas) IC (Information Center) Guide

DTIC Science & Technology

1989-06-01

COMPUTER AIDED DESIGN / COMPUTER AIDED MANUFACTURE 8-8 8.3.7 LIQUID CRYSTAL DISPLAY PANELS 8-8 8.3.8 ARTIFICIAL INTELLIGENCE APPLIED TO VI 8-9 8.4...2 10.3.1 DESKTOP PUBLISHING 10-3 10.3.2 INTELLIGENT COPIERS 10-5 10.3.3 ELECTRONIC ALTERNATIVES TO PRINTED DOCUMENTS 10-5 10.3.4 ELECTRONIC FORMS...Optical Disk LCD Units Storage Image Scanners Graphics Forms Output Generation Copiers Devices Software Optical Disk Intelligent Storage Copiers Work Group

In Vitro and In Vivo Measurement of Percutaneous Penetration of Low Molecular Weight Toxins of Military Interest

DTIC Science & Technology

1990-10-21

findings of this report are not to be construed as an official Department of the Army position unless so designated by other authorized documents. ___i 92...Continue on reverse if niecessary and identity by block number) FIELD GROUP 1SUB- GROUO ý%Skin absorption, human, guinea pig, buccal absorption, =I1...32 Figure 2. In vivo skin retention of PbTx-3 equivalents (percent of applied dose) following topical application to pigs. The bars

DOE Office of Scientific and Technical Information (OSTI.GOV)

Schmieman, E.; Johns, W.E.

This document was compiled by a group of about 12 graduate students in the Department of Mechanical Engineering and Material Science at Washington State University and was funded by the U.S. Department of Energy. The literature search resulting in the compilation of this bibliography was designed to be an exhaustive search for research and development work involving the vitrification of mixed wastes, published by domestic and foreign researchers, primarily during 1989-1994. The search techniques were dominated by electronic methods and this bibliography is also available in electronic format, Windows Reference Manager.

Solar photovoltaics for development applications

DOE Office of Scientific and Technical Information (OSTI.GOV)

Shepperd, L.W.; Richards, E.H.

1993-08-01

This document introduces photovoltaic technology to individuals and groups specializing in development activities. Examples of actual installations illustrate the many services supplied by photovoltaic systems in development applications, including water pumping, lighting, health care, refrigeration, communications, and a variety of productive uses. The various aspects of the technology are explored to help potential users evaluate whether photovoltaics can assist them in achieving their organizational goals. Basic system design, financing techniques, and the importance of infrastructure are included, along with additional sources of information and major US photovoltaic system suppliers.

Evaluation of Winter Operational Runway Friction Measurement Equipment, Procedures, and Research

NASA Technical Reports Server (NTRS)

1995-01-01

This document produced by the FAA/Industry Winter Runway Friction Measurement and Reporting Working Group, is designed to provide an overview of current information on the present guidance, practices, and procedures for reporting runway pavement surface conditions during winter operations at airports. It contains recommendations on the desirability of providing the best procedural consistency and standardization and discusses the available means to implement the guidance that will result in improved aviation safety at airports during hazardous winter conditions.

Definition of a 5MW/61.5m wind turbine blade reference model.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Resor, Brian Ray

2013-04-01

A basic structural concept of the blade design that is associated with the frequently utilized %E2%80%9CNREL offshore 5-MW baseline wind turbine%E2%80%9D is needed for studies involving blade structural design and blade structural design tools. The blade structural design documented in this report represents a concept that meets basic design criteria set forth by IEC standards for the onshore turbine. The design documented in this report is not a fully vetted blade design which is ready for manufacture. The intent of the structural concept described by this report is to provide a good starting point for more detailed and targeted investigationsmore » such as blade design optimization, blade design tool verification, blade materials and structures investigations, and blade design standards evaluation. This report documents the information used to create the current model as well as the analyses used to verify that the blade structural performance meets reasonable blade design criteria.« less

Computerized clinical documentation system in the pediatric intensive care unit

PubMed Central

2001-01-01

Background To determine whether a computerized clinical documentation system (CDS): 1) decreased time spent charting and increased time spent in patient care; 2) decreased medication errors; 3) improved clinical decision making; 4) improved quality of documentation; and/or 5) improved shift to shift nursing continuity. Methods Before and after implementation of CDS, a time study involving nursing care, medication delivery, and normalization of serum calcium and potassium values was performed. In addition, an evaluation of completeness of documentation and a clinician survey of shift to shift reporting were also completed. This was a modified one group, pretest-posttest design. Results With the CDS there was: improved legibility and completeness of documentation, data with better accessibility and accuracy, no change in time spent in direct patient care or charting by nursing staff. Incidental observations from the study included improved management functions of our nurse manager; improved JCAHO documentation compliance; timely access to clinical data (labs, vitals, etc); a decrease in time and resource use for audits; improved reimbursement because of the ability to reconstruct lost charts; limited human data entry by automatic data logging; eliminated costs of printing forms. CDS cost was reasonable. Conclusions When compared to a paper chart, the CDS provided a more legible, compete, and accessible patient record without affecting time spent in direct patient care. The availability of the CDS improved shift to shift reporting. Other observations showed that the CDS improved management capabilities; helped physicians deliver care; improved reimbursement; limited data entry errors; and reduced costs. PMID:11604105

System analysis study of space platform and station accommodations for life sciences research facilities. Volume 1: Executive summary. Phase A: Conceptual design and programmatics

NASA Technical Reports Server (NTRS)

1985-01-01

The study was conducted in 3 parts over a 3 year period. The study schedule and the documentation associated with each study part is given. This document summarized selected study results from the conceptual design and programmatics segment of the effort. The objectives were: (1) to update requirements and tradeoffs and develop a detailed design and mission requirements document; (2) to develop conceptual designs and mission descriptions; and (3) to develop programmatic, i.e., work breakdown structure and work breakdown structure dictionary, estimated cost, and implementing plans and schedules.

Document of standardization of enteral nutrition access in adults.

PubMed

Arribas, Lorena; Frías, Laura; Creus, Gloria; Parejo, Juana; Urzola, Carmen; Ashbaugh, Rosana; Pérez-Portabella, Cleofé; Cuerda, Cristina

2014-07-01

The group of standardization and protocols of the Spanish Society of Parenteral and Enteral Nutrition (SENPE) published in 2011 a consensus document SENPE/SEGHNP/ANECIPN/SECP on enteral access for paediatric nutritional support. Along the lines of this document, we have developed another document on adult patients to homogenize the clinical practice and improve the quality of care in enteral access in this age group. The working group included health professionals (nurses, dietitians and doctor) with extensive experience in enteral nutrition and access. We tried to find scientific evidence through a literature review and we used the criteria of the Agency for Health-care Research and Quality (AHRQ) to classify the evidence (Grade of Recommendation A, B or C). Later the document was reviewed by external experts to the group and requested the endorsement of the Scientific and Educational Committee (CCE) and the group of home artificial nutrition (NADYA) of the SENPE. The full text will be published as a monograph number in this journal. Copyright AULA MEDICA EDICIONES 2014. Published by AULA MEDICA. All rights reserved.

Means of storage and automated monitoring of versions of text technical documentation

NASA Astrophysics Data System (ADS)

Leonovets, S. A.; Shukalov, A. V.; Zharinov, I. O.

2018-03-01

The paper presents automation of the process of preparation, storage and monitoring of version control of a text designer, and program documentation by means of the specialized software is considered. Automation of preparation of documentation is based on processing of the engineering data which are contained in the specifications and technical documentation or in the specification. Data handling assumes existence of strictly structured electronic documents prepared in widespread formats according to templates on the basis of industry standards and generation by an automated method of the program or designer text document. Further life cycle of the document and engineering data entering it are controlled. At each stage of life cycle, archive data storage is carried out. Studies of high-speed performance of use of different widespread document formats in case of automated monitoring and storage are given. The new developed software and the work benches available to the developer of the instrumental equipment are described.

Nurses' Experiences of an Initial and Reimplemented Electronic Health Record Use.

PubMed

Chang, Chi-Ping; Lee, Ting-Ting; Liu, Chia-Hui; Mills, Mary Etta

2016-04-01

The electronic health record is a key component of healthcare information systems. Currently, numerous hospitals have adopted electronic health records to replace paper-based records to document care processes and improve care quality. Integrating healthcare information system into traditional nursing daily operations requires time and effort for nurses to become familiarized with this new technology. In the stages of electronic health record implementation, smooth adoption can streamline clinical nursing activities. In order to explore the adoption process, a descriptive qualitative study design and focus group interviews were conducted 3 months after and 2 years after electronic health record system implementation (system aborted 1 year in between) in one hospital located in southern Taiwan. Content analysis was performed to analyze the interview data, and six main themes were derived, in the first stage: (1) liability, work stress, and anticipation for electronic health record; (2) slow network speed, user-unfriendly design for learning process; (3) insufficient information technology/organization support; on the second stage: (4) getting used to electronic health record and further system requirements, (5) benefits of electronic health record in time saving and documentation, (6) unrealistic information technology competence expectation and future use. It concluded that user-friendly design and support by informatics technology and manpower backup would facilitate this adoption process as well.

SIENA Customer Problem Statement and Requirements

DOE Office of Scientific and Technical Information (OSTI.GOV)

L. Sauer; R. Clay; C. Adams

2000-08-01

This document describes the problem domain and functional requirements of the SIENA framework. The software requirements and system architecture of SIENA are specified in separate documents (called SIENA Software Requirement Specification and SIENA Software Architecture, respectively). While currently this version of the document describes the problems and captures the requirements within the Analysis domain (concentrating on finite element models), it is our intention to subsequent y expand this document to describe problems and capture requirements from the Design and Manufacturing domains. In addition, SIENA is designed to be extendible to support and integrate elements from the other domains (see SIENAmore » Software Architecture document).« less

TOPEX Software Document Series. Volume 5; Rev. 1; TOPEX GDR Processing

NASA Technical Reports Server (NTRS)

Lee, Jeffrey; Lockwood, Dennis; Hancock, David W., III

2003-01-01

This document is a compendium of the WFF TOPEX Software Development Team's knowledge regarding Geophysical Data Record (GDR) Processing. It includes many elements of a requirements document, a software specification document, a software design document, and a user's manual. In the more technical sections, this document assumes the reader is familiar with TOPEX and instrument files.

Exploring barriers and opportunities in adopting crowdsourcing based new product development in manufacturing SMEs

NASA Astrophysics Data System (ADS)

Qin, Shengfeng; Van der Velde, David; Chatzakis, Emmanouil; McStea, Terry; Smith, Neil

2016-10-01

Crowdsourcing is an innovative business practice of obtaining needed services, ideas, or content or even funds by soliciting contributions from a large group of people (the `Crowd'). The potential benefits of utilizing crowdsourcing in product design are well-documented, but little research exists on what are the barriers and opportunities in adopting crowdsourcing in new product development (NPD) of manufacturing SMEs. In order to answer the above questions, a Proof of Market study is carried out on crowdsourcing-based product design under an Innovate UK funded Smart project, which aims at identifying the needs, challenges and future development opportunities associated with adopting crowdsourcing strategies for NPD. The research findings from this study are reported here and can be used to guide future development of crowdsourcing-based collaborative design methods and tools and provide some practical references for industry to adopt this new and emerging collaborative design method in their business.

BT's adoption of customer centric design.

PubMed

Chamberlain, Mark; Esquivel, Jacqueline; Miller, Fiona; Patmore, Jeff

2015-01-01

Between 2005 and 2010 BT underwent a major transformation from a company with a special section devoted to 'older and disabled consumers' to a company with an inclusive design strategy. The mainstreaming of these issues responded to a demand for better, more user-friendly communications products and growing awareness of the importance of previously marginalised consumer groups. It also took place alongside the development and publication of BS7000-6, a guide to inclusive design management. Based on several product design case studies, this paper reflects on how and why this transformation was seen as necessary for future success, and how the transformation was achieved. The evolution of BT's approach has continued since, but this paper looks back in time, and documents the transformation up to 2010 and reflects the state of the company in 2010 rather than at the time of publication. Copyright © 2014 Elsevier Ltd and The Ergonomics Society. All rights reserved.

Design and implementation of practical bidirectional texture function measurement devices focusing on the developments at the University of Bonn.

PubMed

Schwartz, Christopher; Sarlette, Ralf; Weinmann, Michael; Rump, Martin; Klein, Reinhard

2014-04-28

Understanding as well as realistic reproduction of the appearance of materials play an important role in computer graphics, computer vision and industry. They enable applications such as digital material design, virtual prototyping and faithful virtual surrogates for entertainment, marketing, education or cultural heritage documentation. A particularly fruitful way to obtain the digital appearance is the acquisition of reflectance from real-world material samples. Therefore, a great variety of devices to perform this task has been proposed. In this work, we investigate their practical usefulness. We first identify a set of necessary attributes and establish a general categorization of different designs that have been realized. Subsequently, we provide an in-depth discussion of three particular implementations by our work group, demonstrating advantages and disadvantages of different system designs with respect to the previously established attributes. Finally, we survey the existing literature to compare our implementation with related approaches.

Government Acronyms and Alphabetic Designations Used in DDC.

ERIC Educational Resources Information Center

Defense Documentation Center, Alexandria, VA.

The compilation consists of a guide to acronyms and alphabetic designations used by the Department of Defense (DOD), federal government and foreign military organizations on documents to designate reports on research monitored by them and cataloged by the Defense Documentation Center (DDC). In all instances the acronyms are those actually used by…

3 CFR - Rulemaking Concerning the Standards for Designating Positions in the Competitive Service as...

Code of Federal Regulations, 2014 CFR

2014-01-01

... 3 The President 1 2014-01-01 2014-01-01 false Rulemaking Concerning the Standards for Designating Positions in the Competitive Service as National Security Sensitive and Related Matters Presidential Documents Other Presidential Documents Memorandum of January 25, 2013 Rulemaking Concerning the Standards for Designating Positions in the...

3 CFR - Designating the Chairperson of the Defense Production Act Committee

Code of Federal Regulations, 2011 CFR

2011-01-01

... 3 The President 1 2011-01-01 2011-01-01 false Designating the Chairperson of the Defense Production Act Committee Presidential Documents Other Presidential Documents Memorandum of May 19, 2010 Designating the Chairperson of the Defense Production Act Committee Memorandum for the Secretary of Defense [and] the Secretary of Homeland Security...

Developing Training Exemplars for the Requisite Components of Visual Threat Detection

DTIC Science & Technology

2012-09-01

construed as an official Department of the Army position, unless so designated by other authorized documents. i REPORT DOCUMENTATION PAGE 1... Design ............................................................................................................................. 34...activities in the OE. This report presents the findings from the final research phase and consists of a discussion of the design and development of the

ROMPS critical design review. Volume 2: Robot module design documentation

NASA Technical Reports Server (NTRS)

Dobbs, M. E.

1992-01-01

The robot module design documentation for the Remote Operated Materials Processing in Space (ROMPS) experiment is compiled. This volume presents the following information: robot module modifications; Easylab commands definitions and flowcharts; Easylab program definitions and flowcharts; robot module fault conditions and structure charts; and C-DOC flow structure and cross references.

Closed Cycle Electric Discharge Laser Design Investigation

DTIC Science & Technology

1978-03-01

Report Number Assigned by Contract Monitor: NASA CR- 135408 Comments on Document: Archive, RRI, DEW Descriptors, Keywords: Closed Cycle Electric...Discharge Laser Design Investigation Carbon Dioxide Monoxide Space Airborne Heat Disposal Point Track Power Solar Generator Radiation Pages: 00100...Cataloged Date: Nov 27,1992 Contract Number: NAS 3-20100 Document Type: HC Number of Copies In Library: 000001 Record ID: 25219 Source of Document: DEW

NASA Docking System (NDS) Interface Definitions Document (IDD)

NASA Technical Reports Server (NTRS)

Tabakman, Alexander; England, Warren

2013-01-01

The contents of this document define the integrated performance and interface design for NASA Docking System (NDS) Block 1 and the International Docking Adapter. The intent of this IDD is to provide the interface design for using, installing, and interfacing to the NDS Block 1 that will enable successful docking to the IDA. This document is under the control of the ISS Development Projects Office (OG).

Comparing Freshman and doctoral engineering students in design: mapping with a descriptive framework

NASA Astrophysics Data System (ADS)

Carmona Marques, P.

2017-11-01

This paper reports the results of a study of engineering students' approaches to an open-ended design problem. To carry out this, sketches and interviews were collected from 9 freshmen (first year) and 10 doctoral engineering students, when they designed solutions for orange squeezers. Sketches and interviews were analysed and mapped with a descriptive 'ideation framework' (IF) of the design process, to document and compare their design creativity (Carmona Marques, P., A. Silva, E. Henriques, and C. Magee. 2014. "A Descriptive Framework of the Design Process from a Dual Cognitive Engineering Perspective." International Journal of Design Creativity and Innovation 2 (3): 142-164). The results show that the designers worked in a manner largely consistent with the IF for generalisation and specialisation loops. Also, doctoral students produced more alternative solutions during the ideation process. In addition, compared to freshman, doctoral used the generalisation loop of the IF, working at higher levels of abstraction. The iterative nature of design is highlighted during this study - a potential contribution to decrease the gap between both groups in engineering education.

First Steps in Government Documents: A Basic Guide.

ERIC Educational Resources Information Center

Sears, Jean L.; Moody, Marilyn K.

Designed to aid users in locating materials in the government documents department at Miami University in Oxford Ohio, this guide contains general information on the documents collection, a floor plan of the documents department, an introduction to U.S. government document finding aids, an introduction to U.S. Congressional and legislative…

Small groups, big gains: efficacy of a tier 2 phonological awareness intervention with preschoolers with early literacy deficits.

PubMed

Kruse, Lydia G; Spencer, Trina D; Olszewski, Arnold; Goldstein, Howard

2015-05-01

The purpose of the present study was to evaluate the efficacy of a phonological awareness (PA) intervention, designed for Tier 2 instruction in a Response to Intervention (RTI) model, delivered to small groups of preschoolers. A multiple-baseline design across participants was used to evaluate the efficacy of the intervention on low-income preschool children's PA skills. A trained interventionist delivered small group sessions 3 to 4 days a week and ensured children received frequent opportunities to respond and contingent feedback. Participants received 28 to 36 lessons that lasted about 10 min each and focused on PA and alphabet knowledge. Initiation of intervention was staggered across 3 triads, and 7 children completed the study. The intervention produced consistent gains on weekly progress monitoring assessments of the primary outcome measure for first sound identification (First Sound Fluency). Most children also demonstrated gains on other measures of PA and alphabet knowledge. Results provide support for the application of a small group intervention consistent with an RTI framework and document the potential benefits of the intervention to learners who need early literacy instruction beyond the core curriculum.

Undoing an epidemiological paradox: the tobacco industry's targeting of US Immigrants.

PubMed

Acevedo-Garcia, Dolores; Barbeau, Elizabeth; Bishop, Jennifer Anne; Pan, Jocelyn; Emmons, Karen M

2004-12-01

We sought to ascertain whether the tobacco industry has conceptualized the US immigrant population as a separate market. We conducted a content analysis of major tobacco industry documents. The tobacco industry has engaged in 3 distinct marketing strategies aimed at US immigrants: geographically based marketing directed toward immigrant communities, segmentation based on immigrants' assimilation status, and coordinated marketing focusing on US immigrant groups and their countries of origin. Public health researchers should investigate further the tobacco industry's characterization of the assimilated and non-assimilated immigrant markets, and its specific strategies for targeting these groups, in order to develop informed national and international tobacco control countermarketing strategies designed to protect immigrant populations and their countries of origin.

The risk/safety assessment of transgenic crops: the transportability of data.

PubMed

Kearns, Peter; Dagallier, Bertrand; Suwabe, Kazuyuki

2014-12-01

This paper presents the activities and publications of Organisation for Economic Co-operation and Developments (OECD's) Working Group on Harmonisation of Regulatory Oversight in Biotechnology and the Task Force for the Safety of Novel Foods and Feeds. The main outputs of the work are the Series of "consensus documents" of the respective groups. These documents compile information which is intended to be used by those involved in the business of risk/safety assessment. These documents are one means of ensuring the transportability of data amongst authorities. An increasing trend in both the Working Group and Task Force is to consider crop species which are relevant to tropical regions and therefore to countries that are not necessarily members of the OECD. For example, the Working Group has recently published a consensus document on bananas and plantains while the Task Force has published a document on cassava. This trend towards crops of greater interest in the tropics is likely to continue into the future.

Development of Integrated Programs for Aerospace-Vehicle Design (IPAD)

NASA Technical Reports Server (NTRS)

Anderson, O. L.; Calvery, A. L.; Davis, D. A.; Dickmann, L.; Folger, D. H.; Jochem, E. N.; Kitto, C. M.; Vonlimbach, G.

1977-01-01

Integrated Programs for Aerospace Vehicle Design (IPAD) system design requirements are given. The information is based on the IPAD User Requirements Document (D6-IPAD-70013-D) and the Integrated Information Processing Requirements Document (D6-IPAD-70012-D). General information about IPAD and a list of the system design requirements that are to be satisfied by the IPAD system are given. The system design requirements definition is to be considered as a baseline definition of the IPAD system design requirements.

Visual design for the user interface, Part 1: Design fundamentals.

PubMed

Lynch, P J

1994-01-01

Digital audiovisual media and computer-based documents will be the dominant forms of professional communication in both clinical medicine and the biomedical sciences. The design of highly interactive multimedia systems will shortly become a major activity for biocommunications professionals. The problems of human-computer interface design are intimately linked with graphic design for multimedia presentations and on-line document systems. This article outlines the history of graphic interface design and the theories that have influenced the development of today's major graphic user interfaces.

Effect of isoniazid on antigen-specific interferon-γ secretion in latent tuberculosis

PubMed Central

Torres, Martha; Cruz-Hervert, Pablo; Guio, Heinner; Carranza, Claudia; Ferreyra-Reyes, Leticia; Canizales, Sergio; Molina, Susana; Ferreira-Guerrero, Elizabeth; Téllez, Norma; Montero-Campos, Rogelio; Delgado-Sánchez, Guadalupe; Mongua-Rodriguez, Norma; Sifuentes-Osornio, Jose; Ponce-de Leon, Alfredo; Sada, Eduardo; Young, Douglas B.; Wilkinson, Robert J.

2015-01-01

Treatment of persons with latent tuberculosis (TB) infection at greatest risk of reactivation is an important component of TB control and elimination strategies. Biomarkers evaluating the effectiveness of treatment of latent TB infection have not yet been identified. This information would enhance control efforts and assist the evaluation of new treatment regimes. We designed a two-group, two-arm, randomised clinical study of tuberculin skin test-positive participants: 26 with documented contact with TB patients and 34 with non-documented contact. Participants in each group were randomly assigned to the immediate- or deferred-isoniazid treatment arms. Assays of in vitro interferon (IFN)-γ secretion in response to recombinant Rv1737 and overlapping synthetic peptide pools from various groups of immunodominant proteins were performed. During isoniazid therapy, a significant increase from baseline in the proportion of IFN-γ responders to the 10-kDa culture filtrate protein, Rv2031, Rv0849, Rv1986, Rv2659c, Rv2693c and the recombinant Rv1737 protein was observed (p⩽0.05). The peptide pool of Rv0849 and Rv1737 recombinant proteins induced the highest percentage of IFN-γ responders after isoniazid therapy. The in vitro IFN-γ responses to these proteins might represent useful markers to evaluate changes associated with treatment of latent TB infection. PMID:25359354

Vegetarian food guide pyramid: a conceptual framework.

PubMed

Haddad, E H; Sabaté, J; Whitten, C G

1999-09-01

The purpose of this article and the accompanying vegetarian food guide pyramid graphic is to provide the conceptual framework for the development of a new and unique food guide. Food guides for vegetarians have tended to be adaptations of guides developed for the general nonvegetarian population instead of being designed to emphasize the healthy components of vegetarian dietary patterns. A subcommittee of the organizers of the Third International Congress on Vegetarian Nutrition began a process that led to the development of a pyramid-shaped graphic illustration and a supporting document, both of which were introduced at the congress. The 5 major plant-based food groups (whole grains, legumes, vegetables, fruit, nuts, and seeds) form the trapezoid-shaped lower portion of the pyramid. Optional food groups, which may be avoided by some vegetarians (vegetable oils, dairy, eggs, and sweets), form the smaller, separate, triangle-shaped top portion of the pyramid. The supporting document discusses the concepts that affect vegetarian food guidance and the rationale for selecting the food groups. It is hoped that this framework will provide the impetus for further research and discussion and will lead to the development of a guide that is nutritionally adequate, is conducive to good health, and can be adopted by vegetarians of diverse eating practices.

What is competent communication behaviour of patients in physician consultations? - Chronically-ill patients answer in focus groups.

PubMed

Schmidt, Erika; Schöpf, Andrea C; Farin, Erik

2017-09-01

Many desirable outcomes depend on good patient-physician communication. Patient-based perspectives of what constitutes competent communication behavior with physicians are needed for patient-oriented health care. Therefore it was our main aim to identify competent patient communication skills from the patient's perspective. We also wanted to reveal any differences in opinion among various groups (chronic ischemic heart disease, chronic low back pain, breast cancer). This study examined nine guideline-supported focus groups in rehabilitation centers. The criterion for study inclusion was any one of the three diagnoses. Enrolled in the study were N = 49 patients (32 women) aged M = 60.1 (SD = 12.8). The interview recordings were transcribed and subjected to content analysis. We documented 396 commentaries in these interviews that were allocated to 82 different codes; these in turn resulted in the formation of 12 main topics. Examples are: posing questions, being an active and participatory patient, being aware of emotions and communicating them. This study represents stage two ('documentation of patient and clinician views') in the seven-stage model of communication research. Findings reveal that chronically-ill patients name behaviours that contribute to successful discussion with a physician. These enable us to develop communication trainings and design-measuring tools used for patient-based communication skills.

Long Duration Exposure Facility mini-data base user`s guide: IBM-compatible PC computer version. (Diskette)

DOE Office of Scientific and Technical Information (OSTI.GOV)

Bohnhoff-Hlavacek, G.; Pippin, G.; Dursch, H.

1995-04-01

One of the objectives of the LDEF Special Investigation Group (SIG) was to develop a LDEF data base that identifies the experiment objectives and hardware flown, summarizes results and conclusions, and provides a system analysis overview which would include spacecraft design guidelines and space environmental effects. Compiling this information into an easily accessible data base format and making it available to the space community was a major task accomplished by the System and Materials SIG effort beginning in 1991. Included in this document is a short user`s manual for the LDEF Mini-Data Bases. The user`s manual contains pertinent examples frommore » the data base on specifically how to access and work with the LDEF information. Accompanying this document are the mini-data bases on disk.« less

Nitrous Oxide 70% for Procedural Analgosedation in a Pediatric Emergency Department With or Without Intranasal Fentanyl?: Analgesic Efficacy and Adverse Events if Combined With Intranasal Fentanyl.

PubMed

Seiler, Michelle; Landolt, Markus A; Staubli, Georg

2017-07-03

Nitrous oxide 70% (N20 70%) is an excellent medication for procedural analgosedation in a pediatric emergency department. However, its analgesic efficacy remains uncertain for painful procedures; therefore, a combination with intranasal fentanyl (INF), an opioid, was suggested. This study aimed at observing and assessing the analgesic efficacy and rate of adverse events using N20 70% with and without INF. Children who received N20 70% in a tertiary children's hospital emergency department from January 1, 2014 to June 30, 2015 were included in this observational study with prospective data collection. Physicians decided individually whether INF was administered. Medical staff documented the child's behavior during the procedure, adverse events, and satisfaction rate. A total of 442 children were included; 206 (46.6%) received INF. Group differences regarding patient behavior were not statistically significant; however, N20 70% application time was longer in the INF group (P = .02). Nausea was the most frequent adverse event with 13.1% in the INF group versus 8.1% without INF. Inadequate procedural analgosedation was documented only in the INF group, affecting 1.8% of all patients (P = .002). In contrast, anxiety was exclusively observed in the group without INF, which was presumably misjudged pain (P = .03); the satisfaction rate in the INF group was 95.6% compared with 98.7% without INF. Because of the study design and limitations, no conclusions about adding INF to N20 70% can be made. Additional research is needed to investigate the effect of combining N20 70% with INF.

Dietary guidelines for the Spanish population (SENC, December 2016); the new graphic icon of healthy nutrition

PubMed

Aranceta Bartrina, Javier; Arija Val, Victoria; Maíz Aldalur, Edurne; Martínez de la Victoria Muñoz, Emilio; Ortega Anta, Rosa María; Pérez-Rodrigo, Carmen; Quiles Izquierdo, Joan; Rodríguez Martín, Amelia; Román Viñas, Blanca; Salvador Castell, Gemma; Tur Marí, Josep Antoni; Varela Moreiras, Gregorio; Serra Majem, Lluis

2016-12-07

Objective: The Spanish Society of Community Nutrition (SENC) designed in 1994 a food guide for the Spanish population, updated in 2001. This report presents a new updated edition based on the best scientifi c evidence available. Methods: From a health in all policies approach, a group of experts in nutrition and public health associated with SENC was convened to review the evidence on diet-health, nutrition intake and food consumption in the Spanish population, as well as food preparation and consumption habits, determinants and impact of diet on environmental sustainability. Existing systematic reviews, updates, reports, meta-analysis and the latest quality studies have been considered. The collaborative group contributed to draft the document and design the graphic icon, then subject of a consultation process, discussion and qualitative evaluation, particularly relevant through the Advisory Group for the SENC-December 2016 Dietary Guidelines. Results: The new recommendations and its graphical representation highlights as basic considerations the practice of physical activity, emotional balance, energy balance to maintain body weight at adequate levels, healthy cooking procedures and adequate water intake. The recommendations promote a balanced, varied and moderate diet that includes whole grains, fruits, vegetables, legumes, varying amounts of dairy and alternating consumption of fi sh, eggs and lean meats, along with the preferential use of extra virgin olive oil for cooking and seasoning. Reinforce the interest in a healthy, sympathetic, supportive, sustainable diet, based on seasonal and local products, axis for conviviality, devoting adequate time and encourage the use of nutrition labelling information. Conclusions: The analysis of the evidence available and updated information on food consumption in Spain highlights the need to strengthen and implement the recommendations contained in this document to progressively achieve a greater adherence.

Dietary Guidelines for the Spanish population (SENC, diciembre 2016); the new graphic icon of healthy food

PubMed

Aranceta Bartrina, Javier; Arija Val, Victoria; Maíz Aldalur, Edurne; Martínez de Victoria Muñoz, Emilio; Ortega Anta, Rosa María; Pérez-Rodrigo, Carmen; Quiles Izquierdo, Joan; Rodríguez Martín, Amelia; Román Viñas, Blanca; Salvador Castell, Gemma; Tur Marí, Josep Antoni; Varela Moreira, Gregorio; Serra Majem, Lluis

2016-12-07

Objective: The Spanish Society of Community Nutrition (SENC) designed in 1994 a food guide for the Spanish population, updated in 2001. This report presents a new updated edition based on the best scientific evidence available. Methods: From a health in all policies approach, a group of experts in nutrition and public health associated with SENC was convened to review the evidence on diet-health, nutrition intake and food consumption in the Spanish population, as well as food preparation and consumption habits, determinants and impact of diet on environmental sustainability. Existing systematic reviews, updates, reports, meta-analysis and the latest quality studies have been considered. The collaborative group contributed to draft the document and design the graphic icon, then subject of a consultation process, discussion and qualitative evaluation, particularly relevant through the Advisory Group for the SENC-December 2016 Dietary Guidelines. Results: The new recommendations and its graphical representation highlights as basic considerations the practice of physical activity, emotional balance, energy balance to maintain body weight at adequate levels, healthy cooking procedures and adequate water intake. The recommendations promote a balanced, varied and moderate diet that includes whole grains, fruits, vegetables, legumes, varying amounts of dairy and alternating consumption of fi sh, eggs and lean meats, along with the preferential use of extra virgin olive oil for cooking and seasoning. Reinforce the interest in a healthy, sympathetic, supportive, sustainable diet, based on seasonal and local products, axis for conviviality, devoting adequate time and encourage the use of nutrition labelling information. Conclusions: The analysis of the evidence available and updated information on food consumption in Spain highlights the need to strengthen and implement the recommendations contained in this document to progressively achieve a greater adherence.

Usability Assessment of Secure Messaging for Clinical Document Sharing between Health Care Providers and Patients.

PubMed

Jahn, Michelle A; Porter, Brian W; Patel, Himalaya; Zillich, Alan J; Simon, Steven R; Russ, Alissa L

2018-04-01

 Web-based patient portals feature secure messaging systems that enable health care providers and patients to communicate information. However, little is known about the usability of these systems for clinical document sharing.  This article evaluates the usability of a secure messaging system for providers and patients in terms of its ability to support sharing of electronic clinical documents.  We conducted usability testing with providers and patients in a human-computer interaction laboratory at a Midwestern U.S. hospital. Providers sent a medication list document to a fictitious patient via secure messaging. Separately, patients retrieved the clinical document from a secure message and returned it to a fictitious provider. We collected use errors, task completion, task time, and satisfaction.  Twenty-nine individuals participated: 19 providers (6 physicians, 6 registered nurses, and 7 pharmacists) and 10 patients. Among providers, 11 (58%) attached and sent the clinical document via secure messaging without requiring assistance, in a median (range) of 4.5 (1.8-12.7) minutes. No patients completed tasks without moderator assistance. Patients accessed the secure messaging system within 3.6 (1.2-15.0) minutes; retrieved the clinical document within 0.8 (0.5-5.7) minutes; and sent the attached clinical document in 6.3 (1.5-18.1) minutes. Although median satisfaction ratings were high, with 5.8 for providers and 6.0 for patients (scale, 0-7), we identified 36 different use errors. Physicians and pharmacists requested additional features to support care coordination via health information technology, while nurses requested features to support efficiency for their tasks.  This study examined the usability of clinical document sharing, a key feature of many secure messaging systems. Our results highlight similarities and differences between provider and patient end-user groups, which can inform secure messaging design to improve learnability and efficiency. The observations suggest recommendations for improving the technical aspects of secure messaging for clinical document sharing. Schattauer GmbH Stuttgart.

Seismic design parameters - A user guide

USGS Publications Warehouse

Leyendecker, E.V.; Frankel, A.D.; Rukstales, K.S.

2001-01-01

The 1997 NEHRP Recommended Provisions for Seismic Regulations for New Buildings (1997 NEHRP Provisions) introduced seismic design procedure that is based on the explicit use of spectral response acceleration rather than the traditional peak ground acceleration and/or peak ground velocity or zone factors. The spectral response accelerations are obtained from spectral response acceleration maps accompanying the report. Maps are available for the United States and a number of U.S. territories. Since 1997 additional codes and standards have also adopted seismic design approaches based on the same procedure used in the NEHRP Provisions and the accompanying maps. The design documents using the 1997 NEHRP Provisions procedure may be divided into three categories -(1) Design of New Construction, (2) Design and Evaluation of Existing Construction, and (3) Design of Residential Construction. A CD-ROM has been prepared for use in conjunction with the design documents in each of these three categories. The spectral accelerations obtained using the software on the CD are the same as those that would be obtained by using the maps accompanying the design documents. The software has been prepared to operate on a personal computer using a Windows (Microsoft Corporation) operating environment and a point and click type of interface. The user can obtain the spectral acceleration values that would be obtained by use of the maps accompanying the design documents, include site factors appropriate for the Site Class provided by the user, calculate a response spectrum that includes the site factor, and plot a response spectrum. Sites may be located by providing the latitude-longitude or zip code for all areas covered by the maps. All of the maps used in the various documents are also included on the CDROM

Army-NASA aircrew/aircraft integration program: Phase 4 A(3)I Man-Machine Integration Design and Analysis System (MIDAS) software detailed design document

NASA Technical Reports Server (NTRS)

Banda, Carolyn; Bushnell, David; Chen, Scott; Chiu, Alex; Constantine, Betsy; Murray, Jerry; Neukom, Christian; Prevost, Michael; Shankar, Renuka; Staveland, Lowell

1991-01-01

The Man-Machine Integration Design and Analysis System (MIDAS) is an integrated suite of software components that constitutes a prototype workstation to aid designers in applying human factors principles to the design of complex human-machine systems. MIDAS is intended to be used at the very early stages of conceptual design to provide an environment wherein designers can use computational representations of the crew station and operator, instead of hardware simulators and man-in-the-loop studies, to discover problems and ask 'what if' questions regarding the projected mission, equipment, and environment. This document is the Software Product Specification for MIDAS. Introductory descriptions of the processing requirements, hardware/software environment, structure, I/O, and control are given in the main body of the document for the overall MIDAS system, with detailed discussion of the individual modules included in Annexes A-J.

The ropes and challenge course: a quasi-experimental examination.

PubMed

Meyer, B B

2000-06-01

In answering the call for empirical documentation of the effect of ropes and challenge course participation on the psychosocial function and sport performance of athletes and teams, exploratory studies have identified postcourse changes in group cohesion and approaches to sport competition. The purpose of the current study was to utilize a pretest-posttest comparison group design to expand knowledge in this area. 35 members of a girls' high school tennis team participated. The 16 individuals who participated in a preseason program and the 19 individuals who did not comprised the treatment and comparison groups, respectively. Team members completed the Group Environment Questionnaire and the Sport Orientation Questionnaire four days prior to and two days after the course experience. A series of 2 x 2 analyses of variance, (group x time) run on each of the scales, gave a significant group x time interaction on one social cohesion scale but none for scores on the Sport Orientation Questionnaire. The findings are discussed in relation to research and the implementation of these programs with athletes.

Managing Documents in the Wider Area: Intelligent Document Management.

ERIC Educational Resources Information Center

Bittleston, Richard

1995-01-01

Discusses techniques for managing documents in wide area networks, reviews technique limitations, and offers recommendations to database designers. Presented techniques include: increasing bandwidth, reducing data traffic, synchronizing documentation, partial synchronization, audit trials, navigation, and distribution control and security. Two…

[Quality management and strategic consequences of assessing documentation and coding under the German Diagnostic Related Groups system].

PubMed

Schnabel, M; Mann, D; Efe, T; Schrappe, M; V Garrel, T; Gotzen, L; Schaeg, M

2004-10-01

The introduction of the German Diagnostic Related Groups (D-DRG) system requires redesigning administrative patient management strategies. Wrong coding leads to inaccurate grouping and endangers the reimbursement of treatment costs. This situation emphasizes the roles of documentation and coding as factors of economical success. The aims of this study were to assess the quantity and quality of initial documentation and coding (ICD-10 and OPS-301) and find operative strategies to improve efficiency and strategic means to ensure optimal documentation and coding quality. In a prospective study, documentation and coding quality were evaluated in a standardized way by weekly assessment. Clinical data from 1385 inpatients were processed for initial correctness and quality of documentation and coding. Principal diagnoses were found to be accurate in 82.7% of cases, inexact in 7.1%, and wrong in 10.1%. Effects on financial returns occurred in 16%. Based on these findings, an optimized, interdisciplinary, and multiprofessional workflow on medical documentation, coding, and data control was developed. Workflow incorporating regular assessment of documentation and coding quality is required by the DRG system to ensure efficient accounting of hospital services. Interdisciplinary and multiprofessional cooperation is recognized to be an important factor in establishing an efficient workflow in medical documentation and coding.

Event-driven management algorithm of an Engineering documents circulation system

NASA Astrophysics Data System (ADS)

Kuzenkov, V.; Zebzeev, A.; Gromakov, E.

2015-04-01

Development methodology of an engineering documents circulation system in the design company is reviewed. Discrete event-driven automatic models using description algorithms of project management is offered. Petri net use for dynamic design of projects is offered.

Development of integrated programs for Aerospace-vehicle Design (IPAD): Product program management systems

NASA Technical Reports Server (NTRS)

Isenberg, J. M.; Southall, J. W.

1979-01-01

The Integrated Programs for Aerospace Vehicle Design (IPAD) is a computing system to support company-wide design information processing. This document presents a brief description of the management system used to direct and control a product-oriented program. This document, together with the reference design process (CR 2981) and the manufacture interactions with the design process (CR 2982), comprises the reference information that forms the basis for specifying IPAD system requirements.

WFF TOPEX Software Documentation Altimeter Instrument File (AIF) Processing, October 1998. Volume 3

NASA Technical Reports Server (NTRS)

Lee, Jeffrey; Lockwood, Dennis

2003-01-01

This document is a compendium of the WFF TOPEX Software Development Team's knowledge regarding Sensor Data Record (SDR) Processing. It includes many elements of a requirements document, a software specification document, a software design document, and a user's manual. In the more technical sections, this document assumes the reader is familiar with TOPEX and instrument files.

Development of Souvenir Production Transaction Processing System

NASA Astrophysics Data System (ADS)

Rumambi, H.; Kaparang, R.; Lintong, J.

2018-01-01

This research aims to design a souvenir production transaction processing system for the craftsmen in North Sulawesi. The craftsmen make very simple recordings about souvenir production transactions and use documents that are not in accordance with the generally accepted accounting practices. This research uses qualitative method. The data is collected through interviews, observations, documents and literatures studies. The research stages are conducted in preliminary studies, data collection, data analyzed and system design. The design of system is built from chart of account, accounting cycle and documents as input and get processed in accounting recording. The outputs are financial statements. The system design provides benefits for the craftsmen in assessing the financial performance and getting financing from bank.

Overview: The Design, Adoption, and Analysis of a Visual Document Mining Tool for Investigative Journalists.

PubMed

Brehmer, Matthew; Ingram, Stephen; Stray, Jonathan; Munzner, Tamara

2014-12-01

For an investigative journalist, a large collection of documents obtained from a Freedom of Information Act request or a leak is both a blessing and a curse: such material may contain multiple newsworthy stories, but it can be difficult and time consuming to find relevant documents. Standard text search is useful, but even if the search target is known it may not be possible to formulate an effective query. In addition, summarization is an important non-search task. We present Overview, an application for the systematic analysis of large document collections based on document clustering, visualization, and tagging. This work contributes to the small set of design studies which evaluate a visualization system "in the wild", and we report on six case studies where Overview was voluntarily used by self-initiated journalists to produce published stories. We find that the frequently-used language of "exploring" a document collection is both too vague and too narrow to capture how journalists actually used our application. Our iterative process, including multiple rounds of deployment and observations of real world usage, led to a much more specific characterization of tasks. We analyze and justify the visual encoding and interaction techniques used in Overview's design with respect to our final task abstractions, and propose generalizable lessons for visualization design methodology.

An extremely compensatible cigarette by design: documentary evidence on industry awareness and reactions to the Barclay filter design cheating the tar testing system.

PubMed

Kozlowski, L T; Dreschel, N A; Stellman, S D; Wilkenfeld, J; Weiss, E B; Goldberg, M E

2005-02-01

The Barclay cigarette (Brown & Williamson) was introduced in 1980 in the USA in the most expensive launch in history. In the USA and around the world, Barclay was later determined to have a grooved filter design that was compromised by human smokers in the normal act of smoking, but that was measured as ultra-low tar using the standard tar testing protocol. To evaluate whether Brown & Williamson knew of the compensatability of Barclay during the design process and before it was released; to evaluate initial responses of competing tobacco companies to Barclay, before complaints were made to the Federal Trade Commission in 1981. Internet databases of industry documents (Tobacco Documents Online, Legacy Tobacco Documents Library, Brown & Williamson Litigation discovery website, Guildford and major company websites) were searched using key words, key dates, and targeted searches. Documents related specifically to the development, evaluation and release of the Barclay cigarette and related to the responses by competing tobacco companies were examined. Documents indicate the manufacturer was aware of Barclay design problems and was planning, before release, to respond to criticism. Competing companies quickly detected the filter groove stratagem and considered developing their own similar filter, but eventually backed off. The design problems with Barclay were readily understood by cigarette manufacturers, including the maker of Barclay, before official governmental evaluations occurred. Testing involving measured exposures to human smokers may in the end be crucial to identifying problems with novel cigarette designs.

Forensic discrimination of blue ballpoint pens on documents by laser ablation inductively coupled plasma mass spectrometry and multivariate analysis.

PubMed

Alamilla, Francisco; Calcerrada, Matías; García-Ruiz, Carmen; Torre, Mercedes

2013-05-10

The differentiation of blue ballpoint pen inks written on documents through an LA-ICP-MS methodology is proposed. Small common office paper portions containing ink strokes from 21 blue pens of known origin were cut and measured without any sample preparation. In a first step, Mg, Ca and Sr were proposed as internal standards (ISs) and used in order to normalize elemental intensities and subtract background signals from the paper. Then, specific criteria were designed and employed to identify target elements (Li, V, Mn, Co, Ni, Cu, Zn, Zr, Sn, W and Pb) which resulted independent of the IS chosen in a 98% of the cases and allowed a qualitative clustering of the samples. In a second step, an elemental-related ratio (ink ratio) based on the targets previously identified was used to obtain mass independent intensities and perform pairwise comparisons by means of multivariate statistical analyses (MANOVA, Tukey's HSD and T2 Hotelling). This treatment improved the discrimination power (DP) and provided objective results, achieving a complete differentiation among different brands and a partial differentiation within pen inks from the same brands. The designed data treatment, together with the use of multivariate statistical tools, represents an easy and useful tool for differentiating among blue ballpoint pen inks, with hardly sample destruction and without the need for methodological calibrations, being its use potentially advantageous from a forensic-practice standpoint. To test the procedure, it was applied to analyze real handwritten questioned contracts, previously studied by the Department of Forensic Document Exams of the Criminalistics Service of Civil Guard (Spain). The results showed that all questioned ink entries were clustered in the same group, being those different from the remaining ink on the document. Copyright © 2013 Elsevier Ireland Ltd. All rights reserved.

76 FR 49303 - Approval and Promulgation of Air Quality Implementation Plans; Minnesota; Rules Update

Federal Register 2010, 2011, 2012, 2013, 2014

2011-08-10

... design requirements for the monitoring systems. The revised CMS rules also delineate the recordkeeping..., [Insert page number where the document begins]. 7017.1140 CEMS design 03/01/99 08/10/11, [Insert page...]. 7017.1190 COMS design 03/01/99 08/10/11, [Insert page requirements. number where the document begins...

Characterizing Elementary Teachers' Enactment of High-Leverage Practices through Engineering Design-Based Science Instruction

ERIC Educational Resources Information Center

Capobianco, Brenda M.; DeLisi, Jacqueline; Radloff, Jeffrey

2018-01-01

In an effort to document teachers' enactments of new reform in science teaching, valid and scalable measures of science teaching using engineering design are needed. This study describes the development and testing of an approach for documenting and characterizing elementary science teachers' multiday enactments of engineering design-based science…

3 CFR - Designation of Officers of the National Aeronautics And Space Administration To Act as Administrator

Code of Federal Regulations, 2010 CFR

2010-01-01

... 3 The President 1 2010-01-01 2010-01-01 false Designation of Officers of the National Aeronautics And Space Administration To Act as Administrator Presidential Documents Other Presidential Documents Memorandum of January 16, 2009 Designation of Officers of the National Aeronautics And Space Administration To Act as Administrator Memorandum for...

Facsimile Transmission of Microforms.

DTIC Science & Technology

1983-12-30

display terminals, high speed printers, conventional facsimile receivers, and/or graphics COM recorders. Microforms designed for storage, retrieval...author and Whould not be construed as an official Department of the Army position, policy, or decision, unless so designated by other documentation...beconstrued as an official Department of the Army position, policy, or decision, unless so designated by other documentation. ,, -- UNCLASSIFIED SECURITY

Reading, Writing, and Documentation and Managing the Development of User Documentation.

ERIC Educational Resources Information Center

Lindberg, Wayne; Hoffman, Terrye

1987-01-01

The first of two articles addressing the issue of user documentation for computer software discusses the need to teach users how to read documentation. The second presents a guide for writing documentation that is based on the instructional systems design model, and makes suggestions for the desktop publishing of user manuals. (CLB)

TOPEX SDR Processing, October 1998. Volume 4

NASA Technical Reports Server (NTRS)

Lee, Jeffrey E.; Lockwood, Dennis W.

2003-01-01

This document is a compendium of the WFF TOPEX Software Development Team's knowledge regarding Sensor Data Record (SDR) Processing. It includes many elements of a requirements document, a software specification document, a software design document, and a user's manual. In the more technical sections, this document assumes the reader is familiar with TOPEX and instrument files.

Design and Testing of a Thermostable Platform for Multimerization of Single Domain Antibodies

DTIC Science & Technology

2012-08-01

1 DESIGN AND TESTING OF A THERMOSTABLE PLATFORM FOR MULTIMERIZATION OF SINGLE DOMAIN ANTIBODIES ECBC-TR...Army position unless so designated by other authorizing documents. REPORT DOCUMENTATION PAGE Form Approved OMB No. 0704-0188 Public...ADDRESS. 1. REPORT DATE (DD-MM-YYYY) XX-08-2012 2. REPORT TYPE Final 3. DATES COVERED (From - To) Oct 2008 - Sep 2010 4. TITLE AND SUBTITLE Design

Sports and exercise-related tendinopathies: a review of selected topical issues by participants of the second International Scientific Tendinopathy Symposium (ISTS) Vancouver 2012

PubMed Central

Scott, Alex; Docking, Sean; Vicenzino, Bill; Alfredson, Håkan; Zwerver, Johannes; Lundgreen, Kirsten; Finlay, Oliver; Pollock, Noel; Cook, Jill L; Fearon, Angela; Purdam, Craig R; Hoens, Alison; Rees, Jonathan D; Goetz, Thomas J; Danielson, Patrik

2013-01-01

In September 2010, the first International Scientific Tendinopathy Symposium (ISTS) was held in Umeå, Sweden, to establish a forum for original scientific and clinical insights in this growing field of clinical research and practice. The second ISTS was organised by the same group and held in Vancouver, Canada, in September 2012. This symposium was preceded by a round-table meeting in which the participants engaged in focused discussions, resulting in the following overview of tendinopathy clinical and research issues. This paper is a narrative review and summary developed during and after the second ISTS. The document is designed to highlight some key issues raised at ISTS 2012, and to integrate them into a shared conceptual framework. It should be considered an update and a signposting document rather than a comprehensive review. The document is developed for use by physiotherapists, physicians, athletic trainers, massage therapists and other health professionals as well as team coaches and strength/conditioning managers involved in care of sportspeople or workers with tendinopathy. PMID:23584762

U.S. Army weapon systems human-computer interface style guide. Version 2

DOE Office of Scientific and Technical Information (OSTI.GOV)

Avery, L.W.; O`Mara, P.A.; Shepard, A.P.

1997-12-31

A stated goal of the US Army has been the standardization of the human computer interfaces (HCIs) of its system. Some of the tools being used to accomplish this standardization are HCI design guidelines and style guides. Currently, the Army is employing a number of HCI design guidance documents. While these style guides provide good guidance for the command, control, communications, computers, and intelligence (C4I) domain, they do not necessarily represent the more unique requirements of the Army`s real time and near-real time (RT/NRT) weapon systems. The Office of the Director of Information for Command, Control, Communications, and Computers (DISC4),more » in conjunction with the Weapon Systems Technical Architecture Working Group (WSTAWG), recognized this need as part of their activities to revise the Army Technical Architecture (ATA), now termed the Joint Technical Architecture-Army (JTA-A). To address this need, DISC4 tasked the Pacific Northwest National Laboratory (PNNL) to develop an Army weapon systems unique HCI style guide, which resulted in the US Army Weapon Systems Human-Computer Interface (WSHCI) Style Guide Version 1. Based on feedback from the user community, DISC4 further tasked PNNL to revise Version 1 and publish Version 2. The intent was to update some of the research and incorporate some enhancements. This document provides that revision. The purpose of this document is to provide HCI design guidance for the RT/NRT Army system domain across the weapon systems subdomains of ground, aviation, missile, and soldier systems. Each subdomain should customize and extend this guidance by developing their domain-specific style guides, which will be used to guide the development of future systems within their subdomains.« less

Long-term outcomes in medial flap inferior turbinoplasty are superior to submucosal electrocautery and submucosal powered turbinate reduction.

PubMed

Barham, Henry P; Thornton, Mona A; Knisely, Anna; Marcells, George N; Harvey, Richard J; Sacks, Raymond

2016-02-01

Techniques for inferior turbinate reduction vary from complete turbinectomy to limited cauterization. Surgical methods differ on the degree of tissue reduction and reliance on surgical tissue removal vs tissue ablation. The outcome and morbidity from 3 different turbinate techniques are compared. A randomized double-blinded study was performed. Patient nasal cavities were randomized to different interventions on each side within the same patient. One group had a combination of submucosal powered turbinate reduction (designated "submucosal") and submucosal electrocautery (designated "electrocautery"); and the second group had a combination of submucosal powered turbinate reduction (designated "submucosal") and medial flap turbinoplasty (designated "turbinoplasty"). Patient-scored nasal obstruction and rhinorrhoea (1 to 5) along with blindly assessed nasal airway patency ratings (1 to 4) was done at 12 and 60 months postoperatively. Pain requiring additional analgesia, crusting, bleeding (needing review), and revision were documented. A total of 100 patients were recruited (age 32.79 ± 13.58 years; 39% female). This represented 200 nasal airway surgeries with 100 submucosal procedures, 50 electrocautery and 50 medial flap turbinoplasties. No patients complained of worsening of their obstruction. At 60 months patients in the turbinoplasty group had greater outcomes, with 90.2% having occasional or no decongestant use (Kendall's tau B p < 0.001) compared to electrocautery (15.8%) and submucosal (37.8%). Fewer turbinoplasty patients had a revision procedure (12%, χ(2) = 20.08, p < 0.001) compared to electrocautery (54%) and submucosal (40%). Crusting was more common in the electrocautery group (58% vs submucosal 2% and turbinoplasty 0%; χ(2) = 92.04; p < 0.001). The medial flap turbinoplasty provided consistent, robust results. Long-term relief of obstructive symptoms without additional risk of complication was observed in the turbinoplasty group. © 2015 ARS-AAOA, LLC.

Astrionics system designers handbook, volume 1

NASA Technical Reports Server (NTRS)

1973-01-01

Hardware elements in new and advanced astrionics system designs are discussed. This cost effective approach has as its goal the reduction of R&D and testing costs through the application of proven and tested astrionics components. The ready availability to the designer of data facts for applicable system components is highly desirable. The astrionics System Designers Handbook has as its objective this documenting of data facts to serve the anticipated requirements of the astrionics system designer. Eleven NASA programs were selected as the reference base for the document. These programs are: ATS-F, ERTS-B, HEAO-A, OSO-I, Viking Orbiter, OAO-C, Skylab AM/MDA, Skylab ATM, Apollo 17 CSM, Apollo 17 LM and Mariner Mars 71. Four subsystems were chosen for documentation: communications, data management, electrical power and guidance, navigation and control.

Design and development of an ancient Chinese document recognition system

NASA Astrophysics Data System (ADS)

Peng, Liangrui; Xiu, Pingping; Ding, Xiaoqing

2003-12-01

The digitization of ancient Chinese documents presents new challenges to OCR (Optical Character Recognition) research field due to the large character set of ancient Chinese characters, variant font types, and versatile document layout styles, as these documents are historical reflections to the thousands of years of Chinese civilization. After analyzing the general characteristics of ancient Chinese documents, we present a solution for recognition of ancient Chinese documents with regular font-types and layout-styles. Based on the previous work on multilingual OCR in TH-OCR system, we focus on the design and development of two key technologies which include character recognition and page segmentation. Experimental results show that the developed character recognition kernel of 19,635 Chinese characters outperforms our original traditional Chinese recognition kernel; Benchmarked test on printed ancient Chinese books proves that the proposed system is effective for regular ancient Chinese documents.

Exposure assessment of upper limb repetitive movements: a consensus document developed by the Technical Committee on Musculoskeletal Disorders of International Ergonomics Association (IEA) endorsed by International Commission on Occupational Health (ICOH).

PubMed

Colombini, D; Occhipinti, E; Delleman, N; Fallentin, N; Kilbom, A; Grieco, A

2001-01-01

This consensus document intends to supply a set of definitions, criteria and procedures useful to describe and, wherever possible, to assess the work conditions that can represent a physical overload for the upper limbs. The document is aimed at all the operators, i.e. occupational doctors but mainly technicians, who are, involved in risk exposure assessment and management. The document intends to provide methods and procedures easily applicable in the field, possibly not requiring sophisticated instrumentation and when possible based on observation procedures. The proposed methods shall be based as far as possible on knowledge and data from scientific literature: should they be contradictory or deficient, reference will be made to standards or pre-standards issued by national and international agencies and bodies, with the experience of researchers involved and common sense. In this regard, it is to be emphasized that the potential users increasingly demand an easily applicable method for description and assessment of work with repetitive movements. The group intends to give a response even if there are still uncertainties from a strictly scientific standpoint: however the group commits itself to perform subsequent validations especially of as yet unconsolidated issues. This document focuses specifically on identification of risk factors and describes some of the methods that have been developed for evaluating them. There is a rapidly developing body of literature on job analysis and not yet agreement on a single best way to analyze jobs. Professional judgement is required to select the appropriate methods. Analysis and design of jobs should to be integrated into an ongoing ergonomics program that includes management commitment, training, health surveillance, and medical case management. In summing up this report, space must be given to the check lists that are so often seen in the medical press, although this is not the occasion to propose a detailed analytical review.

Impact of an electronic health record operating room management system in ophthalmology on documentation time, surgical volume, and staffing.

PubMed

Sanders, David S; Read-Brown, Sarah; Tu, Daniel C; Lambert, William E; Choi, Dongseok; Almario, Bella M; Yackel, Thomas R; Brown, Anna S; Chiang, Michael F

2014-05-01

Although electronic health record (EHR) systems have potential benefits, such as improved safety and quality of care, most ophthalmology practices in the United States have not adopted these systems. Concerns persist regarding potential negative impacts on clinical workflow. In particular, the impact of EHR operating room (OR) management systems on clinical efficiency in the ophthalmic surgery setting is unknown. To determine the impact of an EHR OR management system on intraoperative nursing documentation time, surgical volume, and staffing requirements. For documentation time and circulating nurses per procedure, a prospective cohort design was used between January 10, 2012, and January 10, 2013. For surgical volume and overall staffing requirements, a case series design was used between January 29, 2011, and January 28, 2013. This study involved ophthalmic OR nurses (n = 13) and surgeons (n = 25) at an academic medical center. Electronic health record OR management system implementation. (1) Documentation time (percentage of operating time documenting [POTD], absolute documentation time in minutes), (2) surgical volume (procedures/time), and (3) staffing requirements (full-time equivalents, circulating nurses/procedure). Outcomes were measured during a baseline period when paper documentation was used and during the early (first 3 months) and late (4-12 months) periods after EHR implementation. There was a worsening in total POTD in the early EHR period (83%) vs paper baseline (41%) (P < .001). This improved to baseline levels by the late EHR period (46%, P = .28), although POTD in the cataract group remained worse than at baseline (64%, P < .001). There was a worsening in absolute mean documentation time in the early EHR period (16.7 minutes) vs paper baseline (7.5 minutes) (P < .001). This improved in the late EHR period (9.2 minutes) but remained worse than in the paper baseline (P < .001). While cataract procedures required more circulating nurses in the early EHR (mean, 1.9 nurses/procedure) and late EHR (mean, 1.5 nurses/procedure) periods than in the paper baseline (mean, 1.0 nurses/procedure) (P < .001), overall staffing requirements and surgical volume were not significantly different between the periods. Electronic health record OR management system implementation was associated with worsening of intraoperative nursing documentation time especially in shorter procedures. However, it is possible to implement an EHR OR management system without serious negative impacts on surgical volume and staffing requirements.

PATHOLOGIC EVALUATION AND REPORTING OF INTRADUCTAL PAPILLARY MUCINOUS NEOPLASMS (IPMNs) OF THE PANCREAS AND OTHER TUMORAL INTRAEPITHELIAL NEOPLASMS OF PANCREATOBILIARY TRACT: RECOMMENDATIONS OF VERONA CONSENSUS MEETING

PubMed Central

Adsay, Volkan; Mino-Kenudson, Mari; Furukawa, Toru; Basturk, Olca; Zamboni, Giuseppe; Marchegiani, Giovanni; Bassi, Claudio; Salvia, Roberto; Malleo, Giuseppe; Paiella, Salvatore; Wolfgang, Christopher L.; Matthaei, Hanno; Offerhaus, G. Johan; Adham, Mustapha; Bruno, Marco J.; Reid, Michelle; Krasinskas, Alyssa; Klöppel, Günter; Ohike, Nobuyuki; Tajiri, Takuma; Jang, Kee-Taek; Roa, Juan Carlos; Allen, Peter; Castillo, Carlos Fernández-del; Jang, Jin-Young; Klimstra, David S.; Hruban, Ralph H.

2015-01-01

Background There are no established guidelines for pathologic diagnosis/reporting of IPMNs. Design An international multidisciplinary group brought together by the Verona Pancreas Group in Italy-2013, was tasked to devise recommendations. Results 1) Crucial to rule out invasive carcinoma with extensive (if not complete) sampling. 2) Invasive component is to be documented in a full synoptic report including its size, type, grade, stage. 3) The term “minimally invasive” should be avoided; instead, invasion size with stage and substaging of T1 (1a, b, c; ≤0.5, >0.5–≤1, >1 cm), is to be documented. 4) Largest diameter of the invasion, not the distance from the nearest duct, is to be used. 5) A category of “indeterminate/(suspicious) for invasion” is acceptable for rare cases. 6) The term “malignant” IPMN should be avoided. 7) The highest grade of dysplasia in the non-invasive component is to be documented separately. 8) Lesion size is to be correlated with imaging findings in cysts with rupture. 9) The main duct diameter, and if possible, its involvement is to be documented; however, it is not required to provide main vs branch duct classification in the resected tumor. 10) Subtyping as gastric/intestinal/pancreatobiliary/oncocytic/mixed is of value. 11) Frozen section is to be performed highly selectively, with appreciation of its shortcomings. 12) These principles also apply to other similar tumoral intraepithelial neoplasms (mucinous cystic neoplasms, intra-ampullary, intra-biliary/cholecystic). Conclusion These recommendations will ensure proper communication of salient tumor characteristics to the management teams, accurate comparison of data between analyses, and development of more effective management algorithms. PMID:25775066

Context sensitive design : thinking beyond the pavement : documentation of workshop development and training.

DOT National Transportation Integrated Search

2005-05-01

This report documents the development and presentation of the workshop titled Thinking Beyond the Pavement A Workshop on Context Sensitive Design. Work began on the workshop development in 1998 after the Kentucky Transportation Cabinet was ...

Towards the formal verification of the requirements and design of a processor interface unit

NASA Technical Reports Server (NTRS)

Fura, David A.; Windley, Phillip J.; Cohen, Gerald C.

1993-01-01

The formal verification of the design and partial requirements for a Processor Interface Unit (PIU) using the Higher Order Logic (HOL) theorem-proving system is described. The processor interface unit is a single-chip subsystem within a fault-tolerant embedded system under development within the Boeing Defense and Space Group. It provides the opportunity to investigate the specification and verification of a real-world subsystem within a commercially-developed fault-tolerant computer. An overview of the PIU verification effort is given. The actual HOL listing from the verification effort are documented in a companion NASA contractor report entitled 'Towards the Formal Verification of the Requirements and Design of a Processor Interface Unit - HOL Listings' including the general-purpose HOL theories and definitions that support the PIU verification as well as tactics used in the proofs.

Effects of using mobile device-based academic electronic medical records for clinical practicum by undergraduate nursing students: A quasi-experimental study.

PubMed

Choi, Mona; Lee, HyeongSuk; Park, Joon Ho

2018-02-01

The academic electronic medical record (AEMR) system is applied with the expectation that nursing students will be able to attain competence in healthcare decision-making and nursing informatics competencies. However, there is insufficient evidence regarding the advantage of applying mobile devices to clinical practicum. This study aimed to examine the effect of an experiment that introduced a mobile AEMR application for undergraduate nursing students in their practicum. A quasi-experimental design was used. The subjects were 75 third-year nursing students enrolled in clinical practicum and were divided into an experimental (practicum with AEMR) and a control (conventional practicum) group. Nursing informatics competencies, critical thinking disposition, and satisfaction with clinical practicum were measured before and after the clinical practicum for each group. The usability of the AEMR application was also examined for the experimental group after the experiment. After the experiment, the experimental group showed a significant increase in the informatics knowledge domain of nursing informatics competencies in the post-test. The difference in critical thinking between the experimental and control groups was not statistically significant. Regarding satisfaction with the clinical practicum, the experimental group exhibited a significantly higher level of satisfaction in "preparation of a diagnostic test or laboratory test and understanding of the results" and "nursing intervention and documentation" than the control group. Students who participated in the practicum using the AEMR application considered it useful. The AEMR application was an effective educational method for practicing the immediate documentation of students' observations and interventions and was available at the patients' bedsides. To improve critical thinking, it is necessary to apply a variety of approaches when solving clinical problems. Copyright © 2017 Elsevier Ltd. All rights reserved.

Concave 1-norm group selection

PubMed Central

Jiang, Dingfeng; Huang, Jian

2015-01-01

Grouping structures arise naturally in many high-dimensional problems. Incorporation of such information can improve model fitting and variable selection. Existing group selection methods, such as the group Lasso, require correct membership. However, in practice it can be difficult to correctly specify group membership of all variables. Thus, it is important to develop group selection methods that are robust against group mis-specification. Also, it is desirable to select groups as well as individual variables in many applications. We propose a class of concave \\documentclass[12pt]{minimal} \\usepackage{amsmath} \\usepackage{wasysym} \\usepackage{amsfonts} \\usepackage{amssymb} \\usepackage{amsbsy} \\usepackage{upgreek} \\usepackage{mathrsfs} \\setlength{\\oddsidemargin}{-69pt} \\begin{document} }{}$1$\\end{document}-norm group penalties that is robust to grouping structure and can perform bi-level selection. A coordinate descent algorithm is developed to calculate solutions of the proposed group selection method. Theoretical convergence of the algorithm is proved under certain regularity conditions. Comparison with other methods suggests the proposed method is the most robust approach under membership mis-specification. Simulation studies and real data application indicate that the \\documentclass[12pt]{minimal} \\usepackage{amsmath} \\usepackage{wasysym} \\usepackage{amsfonts} \\usepackage{amssymb} \\usepackage{amsbsy} \\usepackage{upgreek} \\usepackage{mathrsfs} \\setlength{\\oddsidemargin}{-69pt} \\begin{document} }{}$1$\\end{document}-norm concave group selection approach achieves better control of false discovery rates. An R package grppenalty implementing the proposed method is available at CRAN. PMID:25417206

HKHC Community Dashboard: design, development, and function of a Web-based performance monitoring system.

PubMed

Bors, Philip A; Kemner, Allison; Fulton, John; Stachecki, Jessica; Brennan, Laura K

2015-01-01

As part of Robert Wood Johnson Foundation's Healthy Kids, Healthy Communities (HKHC) national grant program, a technical assistance team designed the HKHC Community Dashboard, an online progress documentation and networking system. The Dashboard was central to HKHC's multimethod program evaluation and became a communication interface for grantees and technical assistance providers. The Dashboard was designed through an iterative process of identifying needs and priorities; designing the user experience, technical development, and usability testing; and applying visual design. The system was created with an open-source content management system and support for building an online community of users. The site developer trained technical assistance providers at the national program office and evaluators, who subsequently trained all 49 grantees. Evaluators provided support for Dashboard users and populated the site with the bulk of its uploaded tools and resource documents. The system tracked progress through an interactive work plan template, regular documentation by local staff and partners, and data coding and analysis by the evaluation team. Other features included the ability to broadcast information to Dashboard users via e-mail, event calendars, discussion forums, private messaging, a resource clearinghouse, a technical assistance diary, and real-time progress reports. The average number of Dashboard posts was 694 per grantee during the grant period. Technical assistance providers and grantees uploaded a total of 1304 resource documents. The Dashboard functions with the highest grantee satisfaction were its interfaces for sharing and progress documentation. A majority of Dashboard users (69%) indicated a preference for continued access to the Dashboard's uploaded resource documents. The Dashboard was a useful and innovative tool for participatory evaluation of a large national grant program. While progress documentation added some burden to local project staff, the system proved to be a useful resource-sharing technology.

Designing Flightdeck Procedures

NASA Technical Reports Server (NTRS)

Barshi, Immanuel; Mauro, Robert; Degani, Asaf; Loukopoulou, Loukia

2016-01-01

The primary goal of this document is to provide guidance on how to design, implement, and evaluate flight deck procedures. It provides a process for developing procedures that meet clear and specific requirements. This document provides a brief overview of: 1) the requirements for procedures, 2) a process for the design of procedures, and 3) a process for the design of checklists. The brief overview is followed by amplified procedures that follow the above steps and provide details for the proper design, implementation and evaluation of good flight deck procedures and checklists.

23 CFR 1340.5 - Documentation requirements.

Code of Federal Regulations, 2010 CFR

2010-04-01

... STATE OBSERVATIONAL SURVEYS OF SEAT BELT USE § 1340.5 Documentation requirements. All sample design, data collection, and estimation procedures used in State surveys conducted in accordance with this part must be well documented. At a minimum, the documentation must: (a) For sample design— (1) Define all...

23 CFR 1340.5 - Documentation requirements.

Code of Federal Regulations, 2011 CFR

2011-04-01

... STATE OBSERVATIONAL SURVEYS OF SEAT BELT USE § 1340.5 Documentation requirements. All sample design, data collection, and estimation procedures used in State surveys conducted in accordance with this part must be well documented. At a minimum, the documentation must: (a) For sample design— (1) Define all...

48 CFR 11.101 - Order of precedence for requirements documents.

Code of Federal Regulations, 2011 CFR

2011-10-01

.... (2) Performance-oriented documents (e.g., a PWS or SOO). (See 2.101.) (3) Detailed design-oriented... requirements documents. 11.101 Section 11.101 Federal Acquisition Regulations System FEDERAL ACQUISITION REGULATION ACQUISITION PLANNING DESCRIBING AGENCY NEEDS Selecting and Developing Requirements Documents 11...

Hypermedia 1990 structured Hypertext tutorial

NASA Technical Reports Server (NTRS)

Johnson, J. Scott

1990-01-01

Hypermedia 1990 structured Hypertext tutorial is presented in the form of view-graphs. The following subject areas are covered: structured hypertext; analyzing hypertext documents for structure; designing structured hypertext documents; creating structured hypertext applications; structuring service and repair documents; maintaining structured hypertext documents; and structured hypertext conclusion.

Prosthetically guided maxillofacial surgery: evaluation of the accuracy of a surgical guide and custom-made bone plate in oncology patients after mandibular reconstruction.

PubMed

Mazzoni, Simona; Marchetti, Claudio; Sgarzani, Rossella; Cipriani, Riccardo; Scotti, Roberto; Ciocca, Leonardo

2013-06-01

The aim of the present study was to evaluate the accuracy of prosthetically guided maxillofacial surgery in reconstructing the mandible with a free vascularized flap using custom-made bone plates and a surgical guide to cut the mandible and fibula. The surgical protocol was applied in a study group of seven consecutive mandibular-reconstructed patients who were compared with a control group treated using the standard preplating technique on stereolithographic models (indirect computer-aided design/computer-aided manufacturing method). The precision of both surgical techniques (prosthetically guided maxillofacial surgery and indirect computer-aided design/computer-aided manufacturing procedure) was evaluated by comparing preoperative and postoperative computed tomographic data and assessment of specific landmarks. With regard to midline deviation, no significant difference was documented between the test and control groups. With regard to mandibular angle shift, only one left angle shift on the lateral plane showed a statistically significant difference between the groups. With regard to angular deviation of the body axis, the data showed a significant difference in the arch deviation. All patients in the control group registered greater than 8 degrees of deviation, determining a facial contracture of the external profile at the lower margin of the mandible. With regard to condylar position, the postoperative condylar position was better in the test group than in the control group, although no significant difference was detected. The new protocol for mandibular reconstruction using computer-aided design/computer-aided manufacturing prosthetically guided maxillofacial surgery to construct custom-made guides and plates may represent a viable method of reproducing the patient's anatomical contour, giving the surgeon better procedural control and reducing procedure time. Therapeutic, III.

MorphoSaurus--design and evaluation of an interlingua-based, cross-language document retrieval engine for the medical domain.

PubMed

Markó, K; Schulz, S; Hahn, U

2005-01-01

We propose an interlingua-based indexing approach to account for the particular challenges that arise in the design and implementation of cross-language document retrieval systems for the medical domain. Documents, as well as queries, are mapped to a language-independent conceptual layer on which retrieval operations are performed. We contrast this approach with the direct translation of German queries to English ones which, subsequently, are matched against English documents. We evaluate both approaches, interlingua-based and direct translation, on a large medical document collection, the OHSUMED corpus. A substantial benefit for interlingua-based document retrieval using German queries on English texts is found, which amounts to 93% of the (monolingual) English baseline. Most state-of-the-art cross-language information retrieval systems translate user queries to the language(s) of the target documents. In contra-distinction to this approach, translating both documents and user queries into a language-independent, concept-like representation format is more beneficial to enhance cross-language retrieval performance.

Modular Integrated Stackable Layers (MISL) 1.1 Design Specification. Design Guideline Document

NASA Technical Reports Server (NTRS)

Yim, Hester J.

2012-01-01

This document establishes the design guideline of the Modular Instrumentation Data Acquisition (MI-DAQ) system in utilization of several designs available in EV. The MI- DAQ provides the options to the customers depending on their system requirements i.e. a 28V interface power supply, a low power battery operated system, a low power microcontroller, a higher performance microcontroller, a USB interface, a Ethernet interface, a wireless communication, various sensor interfaces, etc. Depending on customer's requirements, the each functional board can be stacked up from a bottom level of power supply to a higher level of stack to provide user interfaces. The stack up of boards are accomplished by a predefined and standardized power bus and data bus connections which are included in this document along with other physical and electrical guidelines. This guideline also provides information for a new design options. This specification is the product of a collaboration between NASA/JSC/EV and Texas A&M University. The goal of the collaboration is to open source the specification and allow outside entities to design, build, and market modules that are compatible with the specification. NASA has designed and is using numerous modules that are compatible to this specification. A limited number of these modules will also be released as open source designs to support the collaboration. The released designs are listed in the Applicable Documents.

Design Document for the Moods Data Management System (MDMS) Version 1.0

DTIC Science & Technology

1994-08-01

1 1.3 Document Overview ... . . . . . . . . . . . . . . . . . . . . 1 2 RERENCED DOCUMENTS .................... 2 3 PRELIM[INARY DESIGN... 3 3.1.1.1 CSC-: Grpical User Interfce(GUI).......... 3 3.1.112 CSC-2: Data Management Module (DMM) .................. 4 3.1.1.3 CSC- 3 : Data...5 3.1.1.6 GUI-DMM (CSC-1ICSC-2) internal interface................5 3.1.1.7 GUI-DAM (CSC-1/CSC- 3 ) Internal Interface................5

Studying Upper-Limb Amputee Prosthesis Use to Inform Device Design

DTIC Science & Technology

2017-10-01

AWARD NUMBER: W81XWH-14-1-0277 TITLE: Studying Upper-Limb Amputee Prosthesis Use to Inform Device Design PRINCIPAL INVESTIGATOR: Aaron...Department of the Army position, policy or decision unless so designated by other documentation. REPORT DOCUMENTATION PAGE Form Approved OMB No. 0704...Amputee Prosthesis Use to Inform Device Design 5a. CONTRACT NUMBER 5b. GRANT NUMBER 5c. PROGRAM ELEMENT NUMBER 6. AUTHOR(S) Aaron Dollar, Adam Spiers

NOSC Program Managers Handbook. Revision 1

DTIC Science & Technology

1988-02-01

cost. The effects of application of life-cycle cost analysis through the planning and RIDT&E phases of a program, and the " design to cost" concept on...is the plan for assuring the quality of the design , design documentation, and fabricated/assembled hardware and associated computer software. 13.5.3.2...listings and printouts, which document the n. requirements, design , or details of compute : software; explain the capabilities and limitations of the

US-75 ICM system design document : Dallas Integrated Corridor Management (ICM) demonstration project.

DOT National Transportation Integrated Search

2013-06-01

This System Design document for the US-75 Integrated Corridor Management (ICM) Program has been developed as part of the US Department of Transportation Integrated Corridor Management Initiative. The basic premise behind the ICM initiative is that in...

Nutrient Control Design Manual–State of the Technology Review Report

EPA Science Inventory

This EPA document is an interim product in the development of revised design guidance for nitrogen and phosphorus control at municipal WWTPs. This document presents findings from an extensive review of nitrogen and phosphorus control technologies and techniques currently applied...

7 CFR 1.645 - What are the requirements for requests for documents or tangible things or entry on land?

Code of Federal Regulations, 2010 CFR

2010-01-01

... measuring, surveying, photographing, testing, or sampling either the property or any designated object or...? (a) Motion. Except upon agreement of the parties, a party wishing to request the production of designated documents or tangible things or entry on designated land must file a motion under § 1.641(c). A...

50 CFR 221.45 - What are the requirements for requests for documents or tangible things or entry on land?

Code of Federal Regulations, 2014 CFR

2014-10-01

... measuring, surveying, photographing, testing, or sampling either the property or any designated object or...? (a) Motion. Except upon agreement of the parties, a party wishing to request the production of designated documents or tangible things or entry on designated land must file a motion under § 221.41(c). A...

7 CFR 1.645 - What are the requirements for requests for documents or tangible things or entry on land?

Code of Federal Regulations, 2013 CFR

2013-01-01

... measuring, surveying, photographing, testing, or sampling either the property or any designated object or...? (a) Motion. Except upon agreement of the parties, a party wishing to request the production of designated documents or tangible things or entry on designated land must file a motion under § 1.641(c). A...

7 CFR 1.645 - What are the requirements for requests for documents or tangible things or entry on land?

Code of Federal Regulations, 2014 CFR

2014-01-01

... measuring, surveying, photographing, testing, or sampling either the property or any designated object or...? (a) Motion. Except upon agreement of the parties, a party wishing to request the production of designated documents or tangible things or entry on designated land must file a motion under § 1.641(c). A...

7 CFR 1.645 - What are the requirements for requests for documents or tangible things or entry on land?

Code of Federal Regulations, 2012 CFR

2012-01-01

... measuring, surveying, photographing, testing, or sampling either the property or any designated object or...? (a) Motion. Except upon agreement of the parties, a party wishing to request the production of designated documents or tangible things or entry on designated land must file a motion under § 1.641(c). A...

7 CFR 1.645 - What are the requirements for requests for documents or tangible things or entry on land?

Code of Federal Regulations, 2011 CFR

2011-01-01

... measuring, surveying, photographing, testing, or sampling either the property or any designated object or...? (a) Motion. Except upon agreement of the parties, a party wishing to request the production of designated documents or tangible things or entry on designated land must file a motion under § 1.641(c). A...

50 CFR 221.45 - What are the requirements for requests for documents or tangible things or entry on land?

Code of Federal Regulations, 2012 CFR

2012-10-01

... measuring, surveying, photographing, testing, or sampling either the property or any designated object or...? (a) Motion. Except upon agreement of the parties, a party wishing to request the production of designated documents or tangible things or entry on designated land must file a motion under § 221.41(c). A...

50 CFR 221.45 - What are the requirements for requests for documents or tangible things or entry on land?

Code of Federal Regulations, 2013 CFR

2013-10-01

... measuring, surveying, photographing, testing, or sampling either the property or any designated object or...? (a) Motion. Except upon agreement of the parties, a party wishing to request the production of designated documents or tangible things or entry on designated land must file a motion under § 221.41(c). A...

AM2 Brickwork Pattern Evaluation

DTIC Science & Technology

2016-12-01

pavement applications. Designation : D 6951. West Consho- hocken, PA: ASTM International. ASTM International. 2010a. Standard test method for in-place... design . This report provides test results for each evaluation and discussions comparing their perfor- mance to previous tests conducted under similar... designated by other authorized documents. DESTRUCTION NOTICE - For classified documents, follow the procedures in DOD5200.22-M, Industrial Security Manual

3 CFR - Designation of Officers of the Pension Benefit Guaranty Corporation To Act as Director of the...

Code of Federal Regulations, 2014 CFR

2014-01-01

... 3 The President 1 2014-01-01 2014-01-01 false Designation of Officers of the Pension Benefit Guaranty Corporation To Act as Director of the Pension Benefit Guaranty Corporation Presidential Documents Other Presidential Documents Memorandum of February 1, 2013 Designation of Officers of the Pension Benefit Guaranty Corporation To Act as Director...

3 CFR - Designation of Officers of the Overseas Private Investment Corporation To Act as President of the...

Code of Federal Regulations, 2012 CFR

2012-01-01

... 3 The President 1 2012-01-01 2012-01-01 false Designation of Officers of the Overseas Private Investment Corporation To Act as President of the Overseas Private Investment Corporation Presidential Documents Other Presidential Documents Memorandum of June 6, 2011 Designation of Officers of the Overseas Private Investment Corporation To Act as...

3 CFR - Designation of Officers To Act as President of the Overseas Private Investment Corporation

Code of Federal Regulations, 2010 CFR

2010-01-01

... 3 The President 1 2010-01-01 2010-01-01 false Designation of Officers To Act as President of the Overseas Private Investment Corporation Presidential Documents Other Presidential Documents Memorandum of January 16, 2009 Designation of Officers To Act as President of the Overseas Private Investment Corporation Memorandum for the President of the...

Awareness and distribution of ABO, Rhesus blood groups and haemoglobin phenotypes among medical undergraduates in a Nigerian university.

PubMed

Akingbola, T S; Yuguda, S; Akinyemi, O O; Olomu, S

2016-09-01

In the past two decades the Nigerian government and religious organisations have put more emphasis on knowing the haemoglobin electrophoresis of school children and intending couples respectively. Knowledge of the distribution of blood groups and haemoglobin electrophoretic patterns among young people is vital for the prevention of haemoglobinopathies in the population and for providing effective blood banking services. Therefore, this study was designed to assess the frequency and awareness of blood group and haemoglobinphenotypes among a new set of fourth year clinical medical and dental students of the University of Ibadan, Nigeria. Data, including socio-demographics, self- reported blood group and haemoglobin phenotypes, were obtained from 155 students using a self-administered questionnaire. The ABO, Rhesus (Rh) blood groups and haemoglobin electrophoresis were determined by the tile (slide) technique and cellulose acetate at alkaline phrespectively. Only 43.9% of the participants knew their blood groups while less than a third (29.7%) knew their haemoglobin phenotypes. knowledge of both their blood groups and haemoglobin phenotypes was documented in as low as 20.6% of the respondents. The frequency of haemoglobin AA, AS, AC and. CC were 78.0%, 16.8%, 3.9% and 1.3% respectively. Similarly, the distribution of blood groups were: 0 RhD positive - 47.8%;0 RhD negative- 1.9%;ARhD positive- 21.9%; A RhD negative - 1.3%; B RhD positive - 23.2%; B RhD negative -1.3% and AB RhD positive - 2.6%. No participant was AB RhD negative. Participants who bad previously donated blood and those who were females were more likely to know their blood groups and haemoglobin phenotypes respectively (p<0.05). Awareness of blood groups and haemoglobin phenotypes among the medical and dental students was poor. Documentation and routine screening for haemoglobinphenotypes as well as blood grouping, accompanied by appropriate counseling should be institutionalised in Nigeriantertiary institutions.

Comparing Web, Group and Telehealth Formats of a Military Parenting Program

DTIC Science & Technology

2017-06-01

directed approaches. Comparative effectiveness will be tested by specifying a non - equivalence hypothesis for group -based and web-facilitated relative...Comparative effectiveness will be tested by specifying a non - equivalence hypothesis fro group based and individualized facilitated relative to self-directed...documents for review and approval. 1a. Finalize human subjects protocol and consent documents for pilot group (N=5 families), and randomized controlled

ART/Ada design project, phase 1. Task 2 report: Detailed design

NASA Technical Reports Server (NTRS)

Allen, Bradley P.

1988-01-01

Various issues are studied in the context of the design of an Ada based expert system building tool. Using an existing successful design as a starting point, the impact is analyzed of the Ada language and Ada development methodologies on that design, the Ada system is redesigned, and its performance is analyzed using both complexity-theoretic and empirical techniques. The algorithms specified in the overall design are refined, resolving and documenting any open design issues, identifying each system module, documenting the internal architecture and control logic, and describing the primary data structures involved in the module.

28 CFR 68.45 - Designation of parts of documents.

Code of Federal Regulations, 2010 CFR

2010-07-01

... UNLAWFUL EMPLOYMENT OF ALIENS, UNFAIR IMMIGRATION-RELATED EMPLOYMENT PRACTICES, AND DOCUMENT FRAUD § 68.45... afforded an opportunity to examine the entire document and to offer in evidence in like manner other...

Waste receiving and processing plant control system; system design description

DOE Office of Scientific and Technical Information (OSTI.GOV)

LANE, M.P.

1999-02-24

The Plant Control System (PCS) is a heterogeneous computer system composed of numerous sub-systems. The PCS represents every major computer system that is used to support operation of the Waste Receiving and Processing (WRAP) facility. This document, the System Design Description (PCS SDD), includes several chapters and appendices. Each chapter is devoted to a separate PCS sub-system. Typically, each chapter includes an overview description of the system, a list of associated documents related to operation of that system, and a detailed description of relevant system features. Each appendice provides configuration information for selected PCS sub-systems. The appendices are designed asmore » separate sections to assist in maintaining this document due to frequent changes in system configurations. This document is intended to serve as the primary reference for configuration of PCS computer systems. The use of this document is further described in the WRAP System Configuration Management Plan, WMH-350, Section 4.1.« less

Study protocol for promoting respectful maternity care initiative to assess, measure and design interventions to reduce disrespect and abuse during childbirth in Kenya

PubMed Central

2013-01-01

Background Increases in the proportion of facility-based deliveries have been marginal in many low-income countries in the African region. Preliminary clinical and anthropological evidence suggests that one major factor inhibiting pregnant women from delivering at facility is disrespectful and abusive treatment by health care providers in maternity units. Despite acknowledgement of this behavior by policy makers, program staff, civil society groups and community members, the problem appears to be widespread but prevalence is not well documented. Formative research will be undertaken to test the reliability and validity of a disrespect and abuse (D&A) construct and to then measure the prevalence of disrespect and abuse suffered by clinic clients and the general population. Methods/design A quasi-experimental design will be followed with surveys at twelve health facilities in four districts and one large maternity hospital in Nairobi and areas before and after the introduction of disrespect and abuse (D&A) interventions. The design is aimed to control for potential time dependent confounding on observed factors. Discussion This study seeks to conduct implementation research aimed at designing, testing, and evaluating an approach to significantly reduce disrespectful and abusive (D&A) care of women during labor and delivery in facilities. Specifically the proposed study aims to: (i) determine the manifestations, types and prevalence of D&A in childbirth (ii) develop and validate tools for assessing D&A (iii) identify and explore the potential drivers of D&A (iv) design, implement, monitor and evaluate the impact of one or more interventions to reduce D&A and (v) document and assess the dynamics of implementing interventions to reduce D&A and generate lessons for replication at scale. PMID:23347548

Are national policies on global health in fact national policies on global health governance? A comparison of policy designs from Norway and Switzerland.

PubMed

Jones, Catherine M; Clavier, Carole; Potvin, Louise

2017-01-01

Since the signing of the Oslo Ministerial Declaration in 2007, the idea that foreign policy formulation should include health considerations has gained traction on the United Nations agenda as evidenced by annual General Assembly resolutions on global health and foreign policy. The adoption of national policies on global health (NPGH) is one way that some member states integrate health and foreign policymaking. This paper explores what these policies intend to do and how countries plan to do it. Using a most similar systems design, we carried out a comparative study of two policy documents formally adopted in 2012. We conducted a directed qualitative content analysis of the Norwegian White Paper on Global health in foreign and development policy and the Swiss Health Foreign Policy using Schneider and Ingram's policy design framework. After replicating analysis methods for each document, we analysed them side by side to explore the commonalities and differences across elements of NPGH design. Analyses indicate that NPGH expect to influence change outside their borders. Targeting the international level, they aim to affect policy venues, multilateral partnerships and international institutions. Instruments for supporting desired changes are primarily those of health diplomacy, proposed as a tool for negotiating interests and objectives for global health between multiple sectors, used internally in Switzerland and externally in Norway. Findings suggest that NPGH designs contribute to constructing the global health governance system by identifying it as a policy target, and policy instruments may elude the health sector actors unless implementation rules explicitly include them. Research should explore how future NPGH designs may construct different kinds of targets as politicised groups of actors on which national governments seek to exercise influence for global health decision-making.

Are national policies on global health in fact national policies on global health governance? A comparison of policy designs from Norway and Switzerland

PubMed Central

Clavier, Carole; Potvin, Louise

2017-01-01

Background Since the signing of the Oslo Ministerial Declaration in 2007, the idea that foreign policy formulation should include health considerations has gained traction on the United Nations agenda as evidenced by annual General Assembly resolutions on global health and foreign policy. The adoption of national policies on global health (NPGH) is one way that some member states integrate health and foreign policymaking. This paper explores what these policies intend to do and how countries plan to do it. Methods Using a most similar systems design, we carried out a comparative study of two policy documents formally adopted in 2012. We conducted a directed qualitative content analysis of the Norwegian White Paper on Global health in foreign and development policy and the Swiss Health Foreign Policy using Schneider and Ingram's policy design framework. After replicating analysis methods for each document, we analysed them side by side to explore the commonalities and differences across elements of NPGH design. Results Analyses indicate that NPGH expect to influence change outside their borders. Targeting the international level, they aim to affect policy venues, multilateral partnerships and international institutions. Instruments for supporting desired changes are primarily those of health diplomacy, proposed as a tool for negotiating interests and objectives for global health between multiple sectors, used internally in Switzerland and externally in Norway. Conclusion Findings suggest that NPGH designs contribute to constructing the global health governance system by identifying it as a policy target, and policy instruments may elude the health sector actors unless implementation rules explicitly include them. Research should explore how future NPGH designs may construct different kinds of targets as politicised groups of actors on which national governments seek to exercise influence for global health decision-making. PMID:28589007

The Specific Features of design and process engineering in branch of industrial enterprise

NASA Astrophysics Data System (ADS)

Sosedko, V. V.; Yanishevskaya, A. G.

2017-06-01

Production output of industrial enterprise is organized in debugged working mechanisms at each stage of product’s life cycle from initial design documentation to product and finishing it with utilization. The topic of article is mathematical model of the system design and process engineering in branch of the industrial enterprise, statistical processing of estimated implementation results of developed mathematical model in branch, and demonstration of advantages at application at this enterprise. During the creation of model a data flow about driving of information, orders, details and modules in branch of enterprise groups of divisions were classified. Proceeding from the analysis of divisions activity, a data flow, details and documents the state graph of design and process engineering was constructed, transitions were described and coefficients are appropriated. To each condition of system of the constructed state graph the corresponding limiting state probabilities were defined, and also Kolmogorov’s equations are worked out. When integration of sets of equations of Kolmogorov the state probability of system activity the specified divisions and production as function of time in each instant is defined. On the basis of developed mathematical model of uniform system of designing and process engineering and manufacture, and a state graph by authors statistical processing the application of mathematical model results was carried out, and also advantage at application at this enterprise is shown. Researches on studying of loading services probability of branch and third-party contractors (the orders received from branch within a month) were conducted. The developed mathematical model of system design and process engineering and manufacture can be applied to definition of activity state probability of divisions and manufacture as function of time in each instant that will allow to keep account of loading of performance of work in branches of the enterprise.

Recording animal vocalizations from a UAV: bat echolocation during roost re-entry.

PubMed

Kloepper, Laura N; Kinniry, Morgan

2018-05-17

Unmanned aerial vehicles (UAVs) are rising in popularity for wildlife monitoring, but direct recordings of animal vocalizations have not yet been accomplished, likely due to the noise generated by the UAV. Echolocating bats, especially Tadarida brasiliensis, are good candidates for UAV recording due to their high-speed, high-altitude flight. Here, we use a UAV to record the signals of bats during morning roost re-entry. We designed a UAV to block the noise of the propellers from the receiving microphone, and report on the characteristics of bioacoustic recordings from a UAV. We report the first published characteristics of echolocation signals from bats during group flight and cave re-entry. We found changes in inter-individual time-frequency shape, suggesting that bats may use differences in call design when sensing in complex groups. Furthermore, our first documented successful recordings of animals in their natural habitat demonstrate that UAVs can be important tools for bioacoustic monitoring, and we discuss the ethical considerations for such monitoring.

Does Wechsler Intelligence Scale administration and scoring proficiency improve during assessment training?

PubMed

Platt, Tyson L; Zachar, Peter; Ray, Glen E; Lobello, Steven G; Underhill, Andrea T

2007-04-01

Studies have found that Wechsler scale administration and scoring proficiency is not easily attained during graduate training. These findings may be related to methodological issues. Using a single-group repeated measures design, this study documents statistically significant, though modest, error reduction on the WAIS-III and WISC-III during a graduate course in assessment. The study design does not permit the isolation of training factors related to error reduction, or assessment of whether error reduction is a function of mere practice. However, the results do indicate that previous study findings of no or inconsistent improvement in scoring proficiency may have been the result of methodological factors. Implications for teaching individual intelligence testing and further research are discussed.

A flooded-starved design for nickel-cadmium cells

NASA Technical Reports Server (NTRS)

Thaller, L. H.

1986-01-01

A somewhat analogous situation among groupings of alkaline fuel cells is described where the stochastic aspects were much more accurately documented and then it was illustrated how this problem was eliminated using straight forward principles of pore size engineering. This is followed by a suggested method of adapting these same design principles to nickel-cadmium cells. It must be kept in mind that when cells are cycled to typically twenty percent depth of discharge that eighty percent of the weight of the cell is simply dead weight. Some of this dead weight might be put to better use by trading it for a scheme that would increase the time during which the cell would be working more closely to its optimum set of operating parameters.

GEOSAT Follow-On (GFO) Altimeter Document Series. Volume 5; Version 1; GFO Radar Altimeter Processing at Wallops Flight Facility

NASA Technical Reports Server (NTRS)

Lockwood, Dennis W.; Conger, A. M.

2003-01-01

This document is a compendium of the WFF GFO Software Development Team's knowledge regarding of GDO CAL/VAL Data. It includes many elements of a requirements document, a software specification document, a software design document, and a user's guide. In the more technical sections, this document assumes the reader is familiar with GFO and its CAL/VAL Data.

ETC 408/508: Technical Editing

ERIC Educational Resources Information Center

Charlton, Michael

2013-01-01

The course will focus on the role of the editor in organizational settings, including creating successful writer/editor collaboration. Students will gain practice in editing documents for grammar, syntax, organization, style, emphasis, document design, graphics, and user-centered design. The course will provide an introduction to technology for…

Operational Design Guidelines For High Occupancy Vehicle Lanes On Arterial Roadways, Including Planning Strategies And Supporting Measures

DOT National Transportation Integrated Search

1994-11-01

">THIS REPORT IS A COMPANION TO THE 1993 MINISTRY OF TRANSPORTATION OF ONTARIO DOCUMENT, "OPERATION & DESIGN GUIDELINES FOR HOV LANES ON PROVINCIAL FREEWAYS". SINCE THAT DOCUMENT DEALS EXCLUSIVELY AND COMPREHENSIVELY WITH FREEWAY HOV APPLICATIONS, TH...

Documentation of polio eradication initiative best practices: Experience from WHO African Region.

PubMed

Okeibunor, Joseph; Nshimirimana, Deo; Nsubuga, Peter; Mutabaruka, Evariste; Tapsoba, Leonard; Ghali, Emmanuel; Kabir, Shaikh Humayun; Gassasira, Alex; Mihigo, Richard; Mkanda, Pascal

2016-10-10

The African Region is set to achieving polio eradication. During the years of operations, the Polio Eradication Initiative [PEI] in the Region mobilized and trained tremendous amount of manpower with specializations in surveillance, social mobilization, supplementary immunization activities [SIAs], data management and laboratory staff. Systems were put in place to accelerate the eradication of polio in the Region. Standardized, real-time surveillance and response capacity were established. Many innovations were developed and applied to reaching people in difficult and security challenged terrains. All of these resulted in accumulation of lessons and best practices, which can be used in other priority public health intervention if documented. The World Health Organization Regional Office for Africa [WHO/AFRO] developed a process for the documentation of these best practices, which was pretested in Uganda. The process entailed assessment of three critical elements [effectiveness, efficiency and relevance] five aspects [ethical soundness, sustainability, involvement of partners, community involvement, and political commitment] of best practices. A scored card which graded the elements and aspects on a scale of 0-10 was developed and a true best practice should score >50 points. Independent public health experts documented polio best practices in eight countries in the Region, using this process. The documentation adopted the cross-sectional design in the generation of data, which combined three analytical designs, namely surveys, qualitative inquiry and case studies. For the selection of countries, country responses to earlier questionnaire on best practices were screened for potential best practices. Another criterion used was the level of PEI investment in the countries. A total of 82 best practices grouped into ten thematic areas were documented. There was a correlation between the health system performances with DPT3 as proxy, level of PEI investment in countries with number of best practice. The application of the process for the documentation of polio best practices in the African Region brought out a number of advantages. The triangulation of data collected using multiple methods and the collection of data from all levels of the programme proved useful as it provided opportunity for data verification and corroboration. It also helped to overcome some of the data challenge. Copyright © 2016 The Author(s). Published by Elsevier Ltd.. All rights reserved.

An extremely compensatible cigarette by design: documentary evidence on industry awareness and reactions to the Barclay filter design cheating the tar testing system

PubMed Central

Kozlowski, L; Dreschel, N; Stellman, S; Wilkenfeld, J; Weiss, E; Goldberg, M

2005-01-01

Background: The Barclay cigarette (Brown & Williamson) was introduced in 1980 in the USA in the most expensive launch in history. In the USA and around the world, Barclay was later determined to have a grooved filter design that was compromised by human smokers in the normal act of smoking, but that was measured as ultra-low tar using the standard tar testing protocol. Objectives: To evaluate whether Brown & Williamson knew of the compensatability of Barclay during the design process and before it was released; to evaluate initial responses of competing tobacco companies to Barclay, before complaints were made to the Federal Trade Commission in 1981. Methods: Internet databases of industry documents (Tobacco Documents Online, Legacy Tobacco Documents Library, Brown & Williamson Litigation discovery website, Guildford and major company websites) were searched using key words, key dates, and targeted searches. Documents related specifically to the development, evaluation and release of the Barclay cigarette and related to the responses by competing tobacco companies were examined. Results: Documents indicate the manufacturer was aware of Barclay design problems and was planning, before release, to respond to criticism. Competing companies quickly detected the filter groove stratagem and considered developing their own similar filter, but eventually backed off. Conclusion: The design problems with Barclay were readily understood by cigarette manufacturers, including the maker of Barclay, before official governmental evaluations occurred. Testing involving measured exposures to human smokers may in the end be crucial to identifying problems with novel cigarette designs. PMID:15735303

Meteorological Support Interface Control Working Group (MSICWG) Instrumentation, Data Format, and Networks Document

NASA Technical Reports Server (NTRS)

Brenton, James; Roberts, Barry C.

2017-01-01

The purpose of this document is to provide an overview of instrumentation discussed at the Meteorological Interface Control Working Group (MSICWG), a reference for data formats currently used by members of the group, a summary of proposed formats for future use by the group, an overview of the data networks of the group's members. This document will be updated as new systems are introduced, old systems are retired, and when the MSICWG community necessitates a change to the formats. The MSICWG consists of personnel from the National Aeronautics and Space Administration (NASA) Kennedy Space Center (KSC), NASA Marshall Space Flight Center (MSFC), NASA Johnson Space Center (JSC), National Oceanic and Atmospheric Administration National Weather Service Spaceflight Meteorology Group (SMG), and the United States Air Force (USAF) 45th Space Wing and Weather Squadron. The purpose of the group is to coordinate the distribution of weather related data to support NASA space launch related activities.

The nursing management of diarrhoea and constipation before and after the implementation of a bowel management protocol.

PubMed

McKenna, S; Wallis, M; Brannelly, A; Cawood, J

2001-02-01

Intensive care unit (ICU) patients frequently suffer problems associated with both diarrhoea and constipation. Strategies to optimise the management of these conditions need to focus on improving the communication between staff and ensuring effective treatment is implemented. The team involved in this study developed a Bowel Management Protocol (BMP). The effect of this BMP on the documentation of assessment and management of diarrhoea and constipation was evaluated using a quasi-experimental research design. Data were collected via a retrospective audit of medical records. Two groups of patient records were randomly sampled. The records of 60 patients who were admitted to ICU in the 6 months before the introduction of the BMP were accessed together with the records of 60 patients admitted in the 6 months following the introduction of the BMP. Data were collected regarding patient demographics and the assessment and management of bowel function before and after BMP introduction. The results indicated that a BMP improved documentation of the assessment of bowel function. In addition, there was an improvement in the documentation of nursing intervention in the presence of constipation and diarrhoea. These results have to be interpreted with caution because, despite random sampling over two 6 month periods, there were statistically significant differences in age, length of stay, method of feeding and medical diagnosis between the two groups. Further research into the effectiveness of using a BMP is recommended.

Langmuir Probe Spacecraft Potential End Item Specification Document

NASA Technical Reports Server (NTRS)

Gilchrist, Brian; Curtis, Leslie (Technical Monitor)

2001-01-01

This document describes the Langmuir Probe Spacecraft Potential (LPSP) investigation of the plasma environment in the vicinity of the ProSEDS Delta II spacecraft. This investigation will employ a group of three (3) Langmuir Probe Assemblies, LPAs, mounted on the Delta II second stage to measure the electron density and temperature (n(sub e) and T(sub e)), the ion density (n(sub i)), and the spacecraft potential (V(sub s)) relative to the surrounding ionospheric plasma. This document is also intended to define the technical requirements and flight-vehicle installation interfaces for the design, development, assembly, testing, qualification, and operation of the LPSP subsystem for the Propulsive Small Expendable Deployer System (ProSEDS) and its associated Ground Support Equipment (GSE). This document also defines the interfaces between the LPSP instrument and the ProSEDS Delta II spacecraft, as well as the design, fabrication, operation, and other requirements established to meet the mission objectives. The LPSP is the primary measurement instrument designed to characterize the background plasma environment and is a supporting instrument for measuring spacecraft potential of the Delta II vehicle used for the ProSEDS mission. Specifically, the LPSP will use the three LPAs equally spaced around the Delta II body to make measurements of the ambient ionospheric plasma during passive operations to aid in validating existing models of electrodynamic-tether propulsion. These same probes will also be used to measure Delta II spacecraft potential when active operations occur. When the electron emitting plasma contractor is on, dense neutral plasma is emitted. Effective operation of the plasma contactor (PC) will mean a low potential difference between the Delta II second stage and the surrounding plasma and represents one of the voltage parameters needed to fully characterize the electrodynamic-tether closed circuit. Given that the LP already needs to be well away from any near-field disturbances around the Delta II, it is possible to use the same probe with a simple reconfiguration of the electronics to measure potential with respect to the ambient plasma. The LP measurement techniques are outlined in the following text and discussed in detail in the Appendix. The scientific goals of the investigation, the physical and electrical characteristics of the instrument, and the on-orbit measurement requirements are also discussed in this document.

Oversight Hearing: Office for Civil Rights, Department of Education. Hearing on Reviewing the Activities of the Office of Civil Rights, Department of Education, before the Committee on Labor and Human Resources, United States Senate. One Hundred Second Congress, First Session (May 17, 1991).

ERIC Educational Resources Information Center

Congress of the U.S., Washington, DC. Senate Committee on Labor and Human Resources.

This document contains the record of a hearing designed to review the policies of the Office for Civil Rights of the U.S. Department of Education toward minority school children, with a particular focus on the practice of ability grouping and the labeling of children as "slow" or "dumb" by placing them in particular classrooms.…