Electrical study of DSA shrink process and CD rectification effect at sub-60nm using EUV test vehicle

NASA Astrophysics Data System (ADS)

Chi, Cheng; Liu, Chi-Chun; Meli, Luciana; Guo, Jing; Parnell, Doni; Mignot, Yann; Schmidt, Kristin; Sanchez, Martha; Farrell, Richard; Singh, Lovejeet; Furukawa, Tsuyoshi; Lai, Kafai; Xu, Yongan; Sanders, Daniel; Hetzer, David; Metz, Andrew; Burns, Sean; Felix, Nelson; Arnold, John; Corliss, Daniel

2017-03-01

In this study, the integrity and the benefits of the DSA shrink process were verified through a via-chain test structure, which was fabricated by either DSA or baseline litho/etch process for via layer formation while metal layer processes remain the same. The nearest distance between the vias in this test structure is below 60nm, therefore, the following process components were included: 1) lamella-forming BCP for forming self-aligned via (SAV), 2) EUV printed guiding pattern, and 3) PS-philic sidewall. The local CDU (LCDU) of minor axis was improved by 30% after DSA shrink process. We compared two DSA Via shrink processes and a DSA_Control process, in which guiding patterns (GP) were directly transferred to the bottom OPL without DSA shrink. The DSA_Control apparently resulted in larger CD, thus, showed much higher open current and shorted the dense via chains. The non-optimized DSA shrink process showed much broader current distribution than the improved DSA shrink process, which we attributed to distortion and dislocation of the vias and ineffective SAV. Furthermore, preliminary defectivity study of our latest DSA process showed that the primary defect mode is likely to be etch-related. The challenges, strategies applied to improve local CD uniformity and electrical current distribution, and potential adjustments were also discussed.

MR-guided prostate interventions.

PubMed

Tempany, Clare; Straus, Sarah; Hata, Nobuhiko; Haker, Steven

2008-02-01

In this article the current issues of diagnosis and detection of prostate cancer are reviewed. The limitations for current techniques are highlighted and some possible solutions with MR imaging and MR-guided biopsy approaches are reviewed. There are several different biopsy approaches under investigation. These include transperineal open magnet approaches to closed-bore 1.5T transrectal biopsies. The imaging, image processing, and tracking methods are also discussed. In the arena of therapy, MR guidance has been used in conjunction with radiation methods, either brachytherapy or external delivery. The principles of the radiation treatment, the toxicities, and use of images are outlined. The future role of imaging and image-guided interventions lie with providing a noninvasive surrogate for cancer surveillance or monitoring treatment response. The shift to minimally invasive focal therapies has already begun and will be very exciting when MR-guided focused ultrasound surgery reaches its full potential. (Copyright) 2008 Wiley-Liss, Inc.

MR-Guided Prostate Interventions

PubMed Central

Tempany, Clare; Straus, Sarah; Hata, Nobuhiko; Haker, Steven

2009-01-01

In this article the current issues of diagnosis and detection of prostate cancer are reviewed. The limitations for current techniques are highlighted and some possible solutions with MR imaging and MR-guided biopsy approaches are reviewed. There are several different biopsy approaches under investigation. These include transperineal open magnet approaches to closed-bore 1.5T transrectal biopsies. The imaging, image processing, and tracking methods are also discussed. In the arena of therapy, MR guidance has been used in conjunction with radiation methods, either brachytherapy or external delivery. The principles of the radiation treatment, the toxicities, and use of images are outlined. The future role of imaging and image-guided interventions lie with providing a noninvasive surrogate for cancer surveillance or monitoring treatment response. The shift to minimally invasive focal therapies has already begun and will be very exciting when MR-guided focused ultrasound surgery reaches its full potential. PMID:18219689

Elastic solitons in delaminated bars: splitting leads to fission

NASA Astrophysics Data System (ADS)

Samsonov, A. M.; Dreiden, G. V.; Khusnutdinova, K. R.; Semenova, I. V.

2008-06-01

Recent theoretical and successful experimental studies confirmed existence and demonstrated main properties of bulk strain solitary waves in nonlinearly elastic solid wave guides. Our current research is devoted to nonlinear wave processes in layered elastic wave guides with inhomogeneities modelling delamination. We present first theoretical and experimental results showing the influence of delamination on the parameters of the longitudinal strain solitary wave.

Learning, techniques, and complications of endoscopic ultrasound (EUS)-guided sampling in gastroenterology: European Society of Gastrointestinal Endoscopy (ESGE) Technical Guideline.

PubMed

Polkowski, M; Larghi, A; Weynand, B; Boustière, C; Giovannini, M; Pujol, B; Dumonceau, J-M

2012-02-01

This article is the second of a two-part publication that expresses the current view of the European Society of Gastrointestinal Endoscopy (ESGE) about endoscopic ultrasound (EUS)-guided sampling, including EUS-guided fine needle aspiration (EUS-FNA) and EUS-guided Trucut biopsy. The first part (the Clinical Guideline) focused on the results obtained with EUS-guided sampling, and the role of this technique in patient management, and made recommendations on circumstances that warrant its use. The current Technical Guideline discusses issues related to learning, techniques, and complications of EUS-guided sampling, and to processing of specimens. Technical issues related to maximizing the diagnostic yield (e.g., rapid on-site cytopathological evaluation, needle diameter, microcore isolation for histopathological examination, and adequate number of needle passes) are discussed and recommendations are made for various settings, including solid and cystic pancreatic lesions, submucosal tumors, and lymph nodes. The target readership for the Clinical Guideline mostly includes gastroenterologists, oncologists, internists, and surgeons while the Technical Guideline should be most useful to endoscopists who perform EUS-guided sampling. A two-page executive summary of evidence statements and recommendations is provided. © Georg Thieme Verlag KG Stuttgart · New York.

Using guided debates to teach current issues.

PubMed

Hanna, Debra R

2014-06-01

A guided-debate strategy was developed for a graduate-level core course in current issues based on the Jesuit method of discernment (group decision making). The strategy encourages students to use up-to-date Internet sources to determine the range of opinions on current controversies in the discipline. In addition to providing a structured process to engage in persuasive discussion of difficult issues, the strategy facilitates critical thinking about the quality of the debate itself. Thus, students learn to avoid the pitfalls associated with consensus, such as failing to express reservations or negative opinions that might be important, while learning how to express concerns that might not be easily received by others in a group. Copyright 2014, SLACK Incorporated.

Treatment of proximal hamstring tendinopathy-related sciatic nerve entrapment: presentation of an ultrasound-guided "Intratissue Percutaneous Electrolysis" application.

PubMed

Mattiussi, Gabriele; Moreno, Carlos

2016-01-01

Proximal Hamstring Tendinopathy-related Sciatic Nerve Entrapment (PHTrSNE) is a neuropathy caused by fibrosis interposed between the semimembranosus tendon and the sciatic nerve, at the level of the ischial tuberosity. Ultrasound-guided Intratissue Percutaneous Electrolysis (US-guided EPI) involves galvanic current transfer within the treatment target tissue (fibrosis) via a needle 0.30 to 0.33 mm in diameter. The galvanic current in a saline solution instantly develops the chemical process of electrolysis, which in turn induces electrochemical ablation of fibrosis. In this article, the interventional procedure is presented in detail, and both the strengths and limits of the technique are discussed. US-guided EPI eliminates the fibrotic accumulation that causes PHTrSNE, without the semimembranosus tendon or the sciatic nerve being directly involved during the procedure. The technique is however of limited use in cases of compression neuropathy. US-guided EPI is a technique that is quick to perform, minimally invasive and does not force the patient to suspend their activities (work or sports) to make the treatment effective. This, coupled to the fact that the technique is generally well-tolerated by patients, supports use of US-guided EPI in the treatment of PHTrSNE.

The Role of Direct Current Electric Field-Guided Stem Cell Migration in Neural Regeneration.

PubMed

Yao, Li; Li, Yongchao

2016-06-01

Effective directional axonal growth and neural cell migration are crucial in the neural regeneration of the central nervous system (CNS). Endogenous currents have been detected in many developing nervous systems. Experiments have demonstrated that applied direct current (DC) electric fields (EFs) can guide axonal growth in vitro, and attempts have been made to enhance the regrowth of damaged spinal cord axons using DC EFs in in vivo experiments. Recent work has revealed that the migration of stem cells and stem cell-derived neural cells can be guided by DC EFs. These studies have raised the possibility that endogenous and applied DC EFs can be used to direct neural tissue regeneration. Although the mechanism of EF-directed axonal growth and cell migration has not been fully understood, studies have shown that the polarization of cell membrane proteins and the activation of intracellular signaling molecules are involved in the process. The application of EFs is a promising biotechnology for regeneration of the CNS.

Capaciflector-guided mechanisms

NASA Technical Reports Server (NTRS)

Vranish, John M. (Inventor)

1996-01-01

A plurality of capaciflector proximity sensors, one or more of which may be overlaid on each other, and at least one shield are mounted on a device guided by a robot so as to see a designated surface, hole or raised portion of an object, for example, in three dimensions. Individual current-measuring voltage follower circuits interface the sensors and shield to a common AC signal source. As the device approaches the object, the sensors respond by a change in the currents therethrough. The currents are detected by the respective current-measuring voltage follower circuits with the outputs thereof being fed to a robot controller. The device is caused to move under robot control in a predetermined pattern over the object while directly referencing each other without any offsets, whereupon by a process of minimization of the sensed currents, the device is dithered or wiggled into position for a soft touchdown or contact without any prior contact with the object.

Simulators for training in ultrasound guided procedures.

PubMed

Farjad Sultan, Syed; Shorten, George; Iohom, Gabrielle

2013-06-01

The four major categories of skill sets associated with proficiency in ultrasound guided regional anaesthesia are 1) understanding device operations, 2) image optimization, 3) image interpretation and 4) visualization of needle insertion and injection of the local anesthetic solution. Of these, visualization of needle insertion and injection of local anaesthetic solution can be practiced using simulators and phantoms. This survey of existing simulators summarizes advantages and disadvantages of each. Current deficits pertain to the validation process.

Idea-Based Learning: A Course Design Process to Promote Conceptual Understanding

ERIC Educational Resources Information Center

Hansen , Edmund J.

2011-01-01

Synthesizing the best current thinking about learning, course design, and promoting student achievement, this is a guide to developing college instruction that has clear purpose, is well integrated into the curriculum, and improves student learning in predictable and measurable ways. The process involves developing a transparent course blueprint,…

How To Build a Strategic Plan: A Step-by-Step Guide for School Managers.

ERIC Educational Resources Information Center

Clay, Katherine; And Others

Strategic planning techniques for administrators, with a focus on process managers, are presented in this guidebook. The three major tasks of the strategic planning process include the assessment of the current organizational situation, goal setting, and the development of strategies to accomplish this. Strategic planning differs from long-range…

Nonguiding Center Motion and Substorm Effects in the Magnetotail

NASA Technical Reports Server (NTRS)

Kaufmann, Richard L.; Kontodinas, Ioannis D.; Ball, Bryan M.; Larson, Douglas J.

1997-01-01

Thick and thin models of the middle magnetotail were developed using a consistent orbit tracing technique. It was found that currents carried near the equator by groups of ions with anisotropic distribution functions are not well approximated by the guiding center expressions. The guiding center equations fail primarily because the calculated pressure tensor is not magnetic field aligned. The pressure tensor becomes field aligned as one moves away from the equator, but here there is a small region in which the guiding center equations remain inadequate because the two perpendicular components of the pressure tensor are unequal. The significance of nonguiding center motion to substorm processes then was examined. One mechanism that may disrupt a thin cross-tail current sheet involves field changes that cause ions to begin following chaotic orbits. The lowest-altitude chaotic region, characterized by an adiabaticity parameter kappa approx. equal to 0.8, is especially important. The average cross-tail particle drift is slow, and we were unable to generate a thin current sheet using such ions. Therefore, any process that tends to create a thin current sheet in a region with kappa approaching 0.8 may cause the cross-tail current to get so low that it becomes insufficient to support the lobes. A different limit may be important in resonant orbit regions of a thin current sheet because particles reach a maximum cross-tail drift velocity. If the number of ions per unit length decreases as the tail is stretched, this part of the plasma sheet also may become unable to carry the cross-tail current needed to support the lobes. Thin sheets are needed for both resonant and chaotic orbit mechanisms because the distribution function must be highly structured. A description of current continuity is included to show how field aligned currents can evolve during the transition from a two-dimensional (2-D) to a 3-D configuration.

Strategic planning in an academic radiation medicine program.

PubMed

Hamilton, J L; Foxcroft, S; Moyo, E; Cooke-Lauder, J; Spence, T; Zahedi, P; Bezjak, A; Jaffray, D; Lam, C; Létourneau, D; Milosevic, M; Tsang, R; Wong, R; Liu, F F

2017-12-01

In this paper, we report on the process of strategic planning in the Radiation Medicine Program (rmp) at the Princess Margaret Cancer Centre. The rmp conducted a strategic planning exercise to ensure that program priorities reflect the current health care environment, enable nimble responses to the increasing burden of cancer, and guide program operations until 2020. Data collection was guided by a project charter that outlined the project goal and the roles and responsibilities of all participants. The process was managed by a multidisciplinary steering committee under the guidance of an external consultant and consisted of reviewing strategic planning documents from close collaborators and institutional partners, conducting interviews with key stakeholders, deploying a program-wide survey, facilitating an anonymous and confidential e-mail feedback box, and collecting information from group deliberations. The process of strategic planning took place from December 2014 to December 2015. Mission and vision statements were developed, and core values were defined. A final document, Strategic Roadmap to 2020, was established to guide programmatic pursuits during the ensuing 5 years, and an implementation plan was developed to guide the first year of operations. The strategic planning process provided an opportunity to mobilize staff talents and identify environmental opportunities, and helped to enable more effective use of resources in a rapidly changing health care environment. The process was valuable in allowing staff to consider and discuss the future, and in identifying strategic issues of the greatest importance to the program. Academic programs with similar mandates might find our report useful in guiding similar processes in their own organizations.

Strategic planning in an academic radiation medicine program

PubMed Central

Hamilton, J.L.; Foxcroft, S.; Moyo, E.; Cooke-Lauder, J.; Spence, T.; Zahedi, P.; Bezjak, A.; Jaffray, D.; Lam, C.; Létourneau, D.; Milosevic, M.; Tsang, R.; Wong, R.; Liu, F.F.

2017-01-01

Background In this paper, we report on the process of strategic planning in the Radiation Medicine Program (rmp) at the Princess Margaret Cancer Centre. The rmp conducted a strategic planning exercise to ensure that program priorities reflect the current health care environment, enable nimble responses to the increasing burden of cancer, and guide program operations until 2020. Methods Data collection was guided by a project charter that outlined the project goal and the roles and responsibilities of all participants. The process was managed by a multidisciplinary steering committee under the guidance of an external consultant and consisted of reviewing strategic planning documents from close collaborators and institutional partners, conducting interviews with key stakeholders, deploying a program-wide survey, facilitating an anonymous and confidential e-mail feedback box, and collecting information from group deliberations. Results The process of strategic planning took place from December 2014 to December 2015. Mission and vision statements were developed, and core values were defined. A final document, Strategic Roadmap to 2020, was established to guide programmatic pursuits during the ensuing 5 years, and an implementation plan was developed to guide the first year of operations. Conclusions The strategic planning process provided an opportunity to mobilize staff talents and identify environmental opportunities, and helped to enable more effective use of resources in a rapidly changing health care environment. The process was valuable in allowing staff to consider and discuss the future, and in identifying strategic issues of the greatest importance to the program. Academic programs with similar mandates might find our report useful in guiding similar processes in their own organizations. PMID:29270061

Treatment of proximal hamstring tendinopathy-related sciatic nerve entrapment: presentation of an ultrasound-guided “Intratissue Percutaneous Electrolysis” application

PubMed Central

Mattiussi, Gabriele; Moreno, Carlos

2016-01-01

Summary Background Proximal Hamstring Tendinopathy-related Sciatic Nerve Entrapment (PHTrSNE) is a neuropathy caused by fibrosis interposed between the semimembranosus tendon and the sciatic nerve, at the level of the ischial tuberosity. Methods Ultrasound-guided Intratissue Percutaneous Electrolysis (US-guided EPI) involves galvanic current transfer within the treatment target tissue (fibrosis) via a needle 0.30 to 0.33 mm in diameter. The galvanic current in a saline solution instantly develops the chemical process of electrolysis, which in turn induces electrochemical ablation of fibrosis. In this article, the interventional procedure is presented in detail, and both the strengths and limits of the technique are discussed. Results US-guided EPI eliminates the fibrotic accumulation that causes PHTrSNE, without the semimembranosus tendon or the sciatic nerve being directly involved during the procedure. The technique is however of limited use in cases of compression neuropathy. Conclusion US-guided EPI is a technique that is quick to perform, minimally invasive and does not force the patient to suspend their activities (work or sports) to make the treatment effective. This, coupled to the fact that the technique is generally well-tolerated by patients, supports use of US-guided EPI in the treatment of PHTrSNE. PMID:27900300

Final Report of the NASA Technology Readiness Assessment (TRA) Study Team

NASA Technical Reports Server (NTRS)

Hirshorn, Steven; Jefferies, Sharon

2016-01-01

The material in this report covers the results on the NASA-wide TRA team, who are responsible for ascertaining the full extent of issues and ambiguities pertaining to TRATRL and to provide recommendations for mitigation. The team worked for approximately 6 months to become knowledgeable on the current TRATRL process and guidance and to derive recommendations for improvement.The team reviewed the TRA processes of other government agencies (OGA), including international agencies, and found that while the high-level processes are similar, the NASA process has a greater level of detail. Finally, NASA’s HQ OCT continues to monitor the GAO’s efforts to produce a TRA Best Practices Guide, a draft of which was received in February 2016. This Guide could impact the recommendations of this report.

Guiding electrical current in nanotube circuits using structural defects: a step forward in nanoelectronics.

PubMed

Romo-Herrera, Jose M; Terrones, Mauricio; Terrones, Humberto; Meunier, Vincent

2008-12-23

Electrical current could be efficiently guided in 2D nanotube networks by introducing specific topological defects within the periodic framework. Using semiempirical transport calculations coupled with Landauer-Buttiker formalism of quantum transport in multiterminal nanoscale systems, we provide a detailed analysis of the processes governing the atomic-scale design of nanotube circuits. We found that when defects are introduced as patches in specific sites, they act as bouncing centers that reinject electrons along specific paths, via a wave reflection process. This type of defects can be incorporated while preserving the 3-fold connectivity of each carbon atom embedded within the graphitic lattice. Our findings open up a new way to explore bottom-up design, at the nanometer scale, of complex nanotube circuits which could be extended to 3D nanosystems and applied in the fabrication of nanoelectronic devices.

Certification Processes for Safety-Critical and Mission-Critical Aerospace Software

NASA Technical Reports Server (NTRS)

Nelson, Stacy

2003-01-01

This document is a quick reference guide with an overview of the processes required to certify safety-critical and mission-critical flight software at selected NASA centers and the FAA. Researchers and software developers can use this guide to jumpstart their understanding of how to get new or enhanced software onboard an aircraft or spacecraft. The introduction contains aerospace industry definitions of safety and safety-critical software, as well as, the current rationale for certification of safety-critical software. The Standards for Safety-Critical Aerospace Software section lists and describes current standards including NASA standards and RTCA DO-178B. The Mission-Critical versus Safety-Critical software section explains the difference between two important classes of software: safety-critical software involving the potential for loss of life due to software failure and mission-critical software involving the potential for aborting a mission due to software failure. The DO-178B Safety-critical Certification Requirements section describes special processes and methods required to obtain a safety-critical certification for aerospace software flying on vehicles under auspices of the FAA. The final two sections give an overview of the certification process used at Dryden Flight Research Center and the approval process at the Jet Propulsion Lab (JPL).

The development of a guideline implementability tool (GUIDE-IT): a qualitative study of family physician perspectives

PubMed Central

2014-01-01

Background The potential of clinical practice guidelines has not been realized due to inconsistent adoption in clinical practice. Optimising intrinsic characteristics of guidelines (e.g., its wording and format) that are associated with uptake (as perceived by their end users) may have potential. Using findings from a realist review on guideline uptake and consultation with experts in guideline development, we designed a conceptual version of a future tool called Guideline Implementability Tool (GUIDE-IT). The tool will aim to involve family physicians in the guideline development process by providing a process to assess draft guideline recommendations. This feedback will then be given back to developers to consider when finalizing the recommendations. As guideline characteristics are best assessed by end-users, the objectives of the current study were to explore how family physicians perceive guideline implementability, and to determine what components should comprise the final GUIDE-IT prototype. Methods We conducted a qualitative study with family physicians inToronto, Ontario. Two experienced investigators conducted one-hour interviews with family physicians using a semi-structured interview guide to 1) elicit feedback on perceptions on guideline implementability; 2) to generate a discussion in response to three draft recommendations; and 3) to provide feedback on the conceptual GUIDE-IT. Sessions were audio taped and transcribed verbatim. Data collection and analysis were guided by content analyses. Results 20 family physicians participated. They perceived guideline uptake according to facilitators and barriers across 6 categories of guideline implementability (format, content, language, usability, development, and the practice environment). Participants’ feedback on 3 draft guideline recommendations were grouped according to guideline perception, cognition, and agreement. When asked to comment on GUIDE-IT, most respondents believed that the tool would be useful, but urged to involve “regular” or community family physicians in the process, and suggested that an online system would be the most efficient way to deliver it. Conclusions Our study identified facilitators and barriers of guideline implementability from the perspective of community and academic family physicians that will be used to build our GUIDE-IT prototype. Our findings build on current knowledge by showing that family physicians perceive guideline uptake mostly according to factors that are in the control of guideline developers. PMID:24476491

Refinement of a Conceptual Model for Adolescent Readiness to Engage in End-of-Life Discussions.

PubMed

Bell, Cynthia J; Zimet, Gregory D; Hinds, Pamela S; Broome, Marion E; McDaniel, Anna M; Mays, Rose M; Champion, Victoria L

Adolescents living with incurable cancer require ongoing support to process grief, emotions, and information as disease progresses including treatment options (phase 1 clinical trials and/or hospice/palliative care). Little is known about how adolescents become ready for such discussions. The purpose of this study was to explore the process of adolescent readiness for end-of-life preparedness discussions, generating a theoretical understanding for guiding clinical conversations when curative options are limited. We explored 2 in-depth cases across time using case-study methodology. An à priori conceptual model based on current end-of-life research guided data collection and analysis. Multiple sources including in-depth adolescent interviews generated data collection on model constructs. Analysis followed a logical sequence establishing a chain of evidence linking raw data to study conclusions. Synthesis and data triangulation across cases and time led to theoretical generalizations. Initially, we proposed a linear process of readiness with 3 domains: a cognitive domain (awareness), an emotional domain (acceptance), and a behavioral domain (willingness), which preceded preparedness. Findings led to conceptual model refinement showing readiness is a dynamic internal process that interacts with preparedness. Current awareness context facilitates the type of preparedness discussions (cognitive or emotional). Furthermore, social constraint inhibits discussions. Data support theoretical understanding of the dynamism of readiness. Future research that validates adolescent conceptualization will ensure age-appropriate readiness representation. Understanding the dynamic process of readiness for engaging in end-of-life preparedness provides clinician insight for guiding discussions that facilitate shared decision making and promote quality of life for adolescents and their families.

Study protocol: improving the transition of care from a non-network hospital back to the patient's medical home.

PubMed

Ayele, Roman A; Lawrence, Emily; McCreight, Marina; Fehling, Kelty; Peterson, Jamie; Glasgow, Russell E; Rabin, Borsika A; Burke, Robert; Battaglia, Catherine

2017-02-10

The process of transitioning Veterans to primary care following a non-Veterans Affairs (VA) hospitalization can be challenging. Poor transitions result in medical complications and increased hospital readmissions. The goal of this transition of care quality improvement (QI) project is to identify gaps in the current transition process and implement an intervention that bridges the gap and improves the current transition of care process within the Eastern Colorado Health Care System (ECHCS). We will employ qualitative methods to understand the current transition of care process back to VA primary care for Veterans who received care in a non-VA hospital in ECHCS. We will conduct in-depth semi-structured interviews with Veterans hospitalized in 2015 in non-VA hospitals as well as both VA and non-VA providers, staff, and administrators involved in the current care transition process. Participants will be recruited using convenience and snowball sampling. Qualitative data analysis will be guided by conventional content analysis and Lean Six Sigma process improvement tools. We will use VA claim data to identify the top ten non-VA hospitals serving rural and urban Veterans by volume and Veterans that received inpatient services at non-VA hospitals. Informed by both qualitative and quantitative data, we will then develop a transitions care coordinator led intervention to improve the transitions process. We will test the transition of care coordinator intervention using repeated improvement cycles incorporating salient factors in value stream mapping that are important for an efficient and effective transition process. Furthermore, we will complete a value stream map of the transition process at two other VA Medical Centers and test whether an implementation strategy of audit and feedback (the value stream map of the current transition process with the Transition of Care Dashboard) versus audit and feedback with Transition Nurse facilitation of the process using the Resource Guide and Transition of Care Dashboard improves the transition process, continuity of care, patient satisfaction and clinical outcomes. Our current transition of care process has shortcomings. An intervention utilizing a transition care coordinator has the potential to improve this process. Transitioning Veterans to primary care following a non-VA hospitalization is a crucial step for improving care coordination for Veterans.

Determination of mechanical properties for cement-treated aggregate base : final report.

DOT National Transportation Integrated Search

2017-06-01

The Virginia Department of Transportation (VDOT) currently follows pavement design procedures for all new and rehabilitated pavements based on the 1993 AASHTO Guide for Design of Pavement Structures. VDOTs Materials Division is in the process of i...

Computer-aided design and manufacturing of surgical templates and their clinical applications: a review.

PubMed

Chen, Xiaojun; Xu, Lu; Wang, Wei; Li, Xing; Sun, Yi; Politis, Constantinus

2016-09-01

The surgical template is a guide aimed at directing the implant placement, tumor resection, osteotomy and bone repositioning. Using it, preoperative planning can be transferred to the actual surgical site, and the precision, safety and reliability of the surgery can be improved. However, the actual workflow of the surgical template design and manufacturing is quite complicated before the final clinical application. The major goal of the paper is to provide a comprehensive reference source of the current and future development of the template design and manufacturing for relevant researchers. Expert commentary: This paper aims to present a review of the necessary procedures in the template-guided surgery including the image processing, 3D visualization, preoperative planning, surgical guide design and manufacturing. In addition, the template-guided clinical applications for various kinds of surgeries are reviewed, and it demonstrated that the precision of the surgery has been improved compared with the non-guided operations.

Mathematical Model Of Variable-Polarity Plasma Arc Welding

NASA Technical Reports Server (NTRS)

Hung, R. J.

1996-01-01

Mathematical model of variable-polarity plasma arc (VPPA) welding process developed for use in predicting characteristics of welds and thus serves as guide for selection of process parameters. Parameters include welding electric currents in, and durations of, straight and reverse polarities; rates of flow of plasma and shielding gases; and sizes and relative positions of welding electrode, welding orifice, and workpiece.

Model Guided Design and Development Process for an Electronic Health Record Training Program

PubMed Central

He, Ze; Marquard, Jenna; Henneman, Elizabeth

2016-01-01

Effective user training is important to ensure electronic health record (EHR) implementation success. Though many previous studies report best practice principles and success and failure stories, current EHR training is largely empirically-based and often lacks theoretical guidance. In addition, the process of training development is underemphasized and underreported. A white paper by the American Medical Informatics Association called for models of user training for clinical information system implementation; existing instructional development models from learning theory provide a basis to meet this call. We describe in this paper our experiences and lessons learned as we adapted several instructional development models to guide our development of EHR user training. Specifically, we focus on two key aspects of this training development: training content and training process. PMID:28269940

Guided magnonic Michelson interferometer

PubMed Central

Ahmed, Muhammad H.; Jeske, Jan; Greentree, Andrew D.

2017-01-01

Magnonics is an emerging field with potential applications in classical and quantum information processing. Freely propagating magnons in two-dimensional media are subject to dispersion, which limits their effective range and utility as information carriers. We show the design of a confining magnonic waveguide created by two surface current carrying wires placed above a spin-sheet, which can be used as a primitive for reconfigurable magnonic circuitry. We theoretically demonstrate the ability of such guides to counter the transverse dispersion of the magnon in a spin-sheet, thus extending the range of the magnon. A design of a magnonic directional coupler and controllable Michelson interferometer is shown, demonstrating its utility for information processing tasks. PMID:28134271

Indo-Tibetan Philosophical and Medical Systems: Perspectives on the Biofield

PubMed Central

Daubenmier, Jennifer; Muehsam, David; Rapgay, Lopsang; Chopra, Deepak

2015-01-01

The word biofield is a term that Western scientists have used to describe various aspects of energy and information fields that guide health processes. Similar concepts and descriptions of energy and information patterns exist in various cultures and have guided whole systems of medicine such as Ayurveda and Tibetan medicine. This article describes Vedic, Jain, and Tibetan philosophical and medical systems' concepts of consciousness and subtle energy and their relationships to health processes in order to foster deeper crosscultural dialogue on the nature of the biofield. Similarities and differences within the 3 traditions are noted, and suggestions for considering these concepts to extend current biofield research are discussed. PMID:26665038

Student Centered Curriculum: Elementary School

ERIC Educational Resources Information Center

Rondone, Atria

2014-01-01

Student-centered learning has an important place in education because it fosters student engagement and allows the traditional micromanaging teacher to transform into a guide. The current education model emphasizes teacher control and curriculum based on standardized testing, which stunts students' natural learning processes. This study…

Development of Low-Cost Method for Fabrication of Metal Neutron Guides

DOE Office of Scientific and Technical Information (OSTI.GOV)

Engelhaupt, Darell; Khaykovich, Boris; Romaine, Suzanne

Neutron scattering is one of the most useful methods of studying the structure and dynamics of matter. US DOE neutron scattering research facilities at Oak Ridge National Laboratory are among the World’s most advanced, providing researchers with unmatched capabilities for probing the structure and properties of materials, including engineering and biological systems. This task is to develop a lower cost process to optimize and produce the required neutron guides capable of efficiently delivering neutron beams for tens of meters between neutron moderators and instruments. Therefore, our effort is to improve the performance and lower the production cost of neutron guides.more » Our approach aims at improving guide quality while controlling their rising costs by adopting a novel electroforming replication approach to their fabrication. These guides will be especially advantageous when used near the neutron source since the radiation resistance of nickel is superior to glass. Additionally, we are depositing low-stress nickel from an extremely low impurity solution completely free of stress-reducing agents, which nominally contain and impart sulfur, carbon and other elements that potentially activate in the neutron environment. This is achieved by using a pulsed periodically reversed current methodology. The best guides quote waviness of 0.1 mrad. It is reasonable to prepare just one mandrel of about 0.5 m long, for production of tens of guide segments, saving both the cost and supply time of guides to neutron facilities. We estimate that we can fabricate a single mandrel for the current cost of an individual one-meter guide, but from this, we can produce tens of meters of guide very inexpensively without mandrel refurbishment. While a multilayer coating will add to the overall cost, we expect this will be less than that of commercially available guides today. Therefore, we will produce higher quality guides, which are less susceptible to radiation damage, at the lower cost than those available today.« less

Development of Low-Cost Method for Fabrication of Metal Neutron Guides

DOE Office of Scientific and Technical Information (OSTI.GOV)

Engelhaupt, Darell; Khaykovich, Boris; Romaine, Suzanne

2017-12-19

Neutron scattering is one of the most useful methods of studying the structure and dynamics of matter. US DOE neutron scattering research facilities at Oak Ridge National Laboratory are among the World’s most advanced, providing researchers with unmatched capabilities for probing the structure and properties of materials, including engineering and biological systems. This task is to develop a lower cost process to optimize and produce the required neutron guides capable of efficiently delivering neutron beams for tens of meters between neutron moderators and instruments. Therefore, our effort is to improve the performance and lower the production cost of neutron guides.more » Our approach aims at improving guide quality while controlling their rising costs by adopting a novel electroforming replication approach to their fabrication. These guides will be especially advantageous when used near the neutron source since the radiation resistance of nickel is superior to glass. Additionally, we are depositing low-stress nickel from an extremely low impurity solution completely free of stress-reducing agents, which nominally contain and impart sulfur, carbon and other elements that potentially activate in the neutron environment. This is achieved by using a pulsed periodically reversed current methodology. The best guides quote waviness of 0.1 mrad. It is reasonable to prepare just one mandrel of about 0.5 m long, for production of tens of guide segments, saving both the cost and supply time of guides to neutron facilities. We estimate that we can fabricate a single mandrel for the current cost of an individual one-meter guide, but from this, we can produce tens of meters of guide very inexpensively without mandrel refurbishment. While a multilayer coating will add to the overall cost, we expect this will be less than that of commercially available guides today. Therefore, we will produce higher quality guides, which are less susceptible to radiation damage, at the lower cost than those available today.« less

Integration of patient specific modeling and advanced image processing techniques for image-guided neurosurgery

NASA Astrophysics Data System (ADS)

Archip, Neculai; Fedorov, Andriy; Lloyd, Bryn; Chrisochoides, Nikos; Golby, Alexandra; Black, Peter M.; Warfield, Simon K.

2006-03-01

A major challenge in neurosurgery oncology is to achieve maximal tumor removal while avoiding postoperative neurological deficits. Therefore, estimation of the brain deformation during the image guided tumor resection process is necessary. While anatomic MRI is highly sensitive for intracranial pathology, its specificity is limited. Different pathologies may have a very similar appearance on anatomic MRI. Moreover, since fMRI and diffusion tensor imaging are not currently available during the surgery, non-rigid registration of preoperative MR with intra-operative MR is necessary. This article presents a translational research effort that aims to integrate a number of state-of-the-art technologies for MRI-guided neurosurgery at the Brigham and Women's Hospital (BWH). Our ultimate goal is to routinely provide the neurosurgeons with accurate information about brain deformation during the surgery. The current system is tested during the weekly neurosurgeries in the open magnet at the BWH. The preoperative data is processed, prior to the surgery, while both rigid and non-rigid registration algorithms are run in the vicinity of the operating room. The system is tested on 9 image datasets from 3 neurosurgery cases. A method based on edge detection is used to quantitatively validate the results. 95% Hausdorff distance between points of the edges is used to estimate the accuracy of the registration. Overall, the minimum error is 1.4 mm, the mean error 2.23 mm, and the maximum error 3.1 mm. The mean ratio between brain deformation estimation and rigid alignment is 2.07. It demonstrates that our results can be 2.07 times more precise then the current technology. The major contribution of the presented work is the rigid and non-rigid alignment of the pre-operative fMRI with intra-operative 0.5T MRI achieved during the neurosurgery.

Development of Turbulent Magnetic Reconnection in a Magnetic Island

DOE Office of Scientific and Technical Information (OSTI.GOV)

Huang, Can; Lu, Quanming; Wang, Rongsheng

In this paper, with two-dimensional particle-in-cell simulations, we report that the electron Kelvin–Helmholtz instability is unstable in the current layer associated with a large-scale magnetic island, which is formed in multiple X-line guide field reconnections. The current sheet is fragmented into many small current sheets with widths down to the order of the electron inertial length. Secondary magnetic reconnection then occurs in these fragmented current sheets, which leads to a turbulent state. The electrons are highly energized in such a process.

Broader Impact Guidance for Florida Ocean Scientists: Process, Products and Outcomes

NASA Astrophysics Data System (ADS)

Cook, S.

2016-02-01

In response to the 2011 National Science Board report National Science Foundation's Merit Review Criteria: Review and Revision, in 2012 significant changes were made to the portions of the National Science Foundation's (NSF's) Grant Proposal Guide that describe the Foundation's expectations with respect to the Broader Impacts (BI) criterion and what reviewers should look for in assessing the quality of the required BI components of proposals. Over the past 5 years, COSEE Florida (the Florida Center for Ocean Sciences Education Excellence) has provided individualized content and editorial `coaching' on Broader Impacts for Florida scientists and educators submitting proposals to NSF. As of September 2015, 32% of the plans prepared with our guidance have been associated with projects that have received support. This presentation will review 1) the current BI guidance provided by NSF in the 2012 and subsequent editions of the Grant Proposal Guide, 2) the administrative process used by COSEE Florida to identify and assist scientists in understanding these changes and preparing fundable BI plans, 3) the characteristics of submitted plans in terms of type of plan, PI career stage and demographics 4) `lessons learned' about plan strengths and weaknesses and 5) the products developed (or currently under development) as COSEE Florida legacy documents to guide current and future scientists in addressing the Broader Impacts criterion. Resources developed by other Centers in the national COSEE network and the new National Alliance for Broader Impacts (NABI) will also be described.

Laboratory reconnection experiments

NASA Astrophysics Data System (ADS)

Grulke, Olaf

Laboratory experiments dedicated for the study of magnetic reconnection have been contributed considerably to a more detailed understanding of the involved processes. Their strength is to disentangle parameter dependencies, to diagnose in detail the plasma and field response, and to form an excellent testbed for the validation of numerical simulations. In the present paper recent results obtained from the new cylindrical reconnection experiment VINETA II are presented. The experimental setup allows to independently vary plasma parameters, reconnection drive strength/timescale, and current sheet amplitude. Current research objectives focus on two major scientific issues: Guide field effects on magnetic reconnection and the evolution of electromagnetic fluctuations. The superimposed homogeneous magnetic guide field has a strong influence on the spatiotemporal evolution of the current sheet, predominantly due to magnetic pitch angle effects, which leads to a strong elongation of the sheet along the separatrices and results in axial gradients of the reconnection rates. Within the current sheet, incoherent electromagnetic fluctuations are observed. Their magnetic signature is characterized by a broad spectrum somewhat centered around the lower-hybrid frequency and extremely short spatial correlation lengths being typically smaller than the local ion sound radius. The fluctuation amplitude correlates with the local current density and, thus, for low guide fields, displays also axial gradients. Despite the quantitatively different parameter regime and geometry the basic fluctuation properties are in good agreement with studies conducted at the MRX experiment (PPPL).

Microwave Photon Detector in Circuit QED

NASA Astrophysics Data System (ADS)

Garcia-Ripoll, Juan Jose; Romero, Guillermo; Solano, Enrique

2009-03-01

In this work we propose a design for a microwave photodetector based on elements from circuit QED such as the ones used in qubit designs. Our proposal consists on a microwave guide in which we embed circuital elements that can absorb photons and irreversibly change state. These incoherent absorption processes constitute the measurement itself. We first model this design using a general master equation for the propagating photons and the absorbing elements. We find that the detection efficiency for a single absorber is limited to 50%, and that this efficiency can be quickly increased by adding more elements with a moderate separation, obtaining 80% and 90% for two and three absorbers. Our abstract design has at least one possible implementation in which the absorbers are current biased Josephson junction. We demonstrate that the coupling between the guide and the junctions is strong enough, irrespectively of the microwave guide size, and derivate realistic parameters for high fidelity operation with current experiments. Patent pending No. 200802933, Oficina Espanola de Patentes y Marcas, 17/10/2008.

Dynamics of laser-guided alternating current high voltage discharges

NASA Astrophysics Data System (ADS)

Daigle, J.-F.; Théberge, F.; Lassonde, P.; Kieffer, J.-C.; Fujii, T.; Fortin, J.; Châteauneuf, M.; Dubois, J.

2013-10-01

The dynamics of laser-guided alternating current high voltage discharges are characterized using a streak camera. Laser filaments were used to trigger and guide the discharges produced by a commercial Tesla coil. The streaking images revealed that the dynamics of the guided alternating current high voltage corona are different from that of a direct current source. The measured effective corona velocity and the absence of leader streamers confirmed that it evolves in a pure leader regime.

The road to successful ITS software acquisition. Volume 2, Software acquisition process reference guide

DOT National Transportation Integrated Search

2000-12-01

The current performance-related specifications (PRS) methodology has been under development by the Federal Highway Administration (FHWA) for several years and has now reached a level at which it can be implemented by State highway agencies. PRS for h...

The Role of Rationality in Transformative Education

ERIC Educational Resources Information Center

Arends, Jessica

2014-01-01

As scholars, we are responsible for examining the academic and pedagogical traditions from which our current approaches have developed. This includes the historical establishment of and reliance upon rationality which postmodernist scholarship argues unconsciously guides our educational motives and processes. Rationality is especially relevant to…

Assessing cognitive processes related to insomnia: A review and measurement guide for Harvey's cognitive model for the maintenance of insomnia.

PubMed

Hiller, Rachel M; Johnston, Anna; Dohnt, Hayley; Lovato, Nicole; Gradisar, Michael

2015-10-01

Cognitive processes play an important role in the maintenance, and treatment of sleep difficulties, including insomnia. In 2002, a comprehensive model was proposed by Harvey. Since its inception the model has received >300 citations, and provided researchers and clinicians with a framework for understanding and treating insomnia. The aim of this review is two-fold. First, we review the current literature investigating each factor proposed in Harvey's cognitive model of insomnia. Second, we summarise the psychometric properties of key measures used to assess the model's factors and mechanisms. From these aims, we demonstrate both strengths and limitations of the current knowledge of appropriate measurements associated with the model. This review aims to stimulate and guide future research in this area; and provide an understanding of the resources available to measure, target, and resolve cognitive factors that may maintain chronic insomnia. Copyright © 2014 Elsevier Ltd. All rights reserved.

Origin and evolution of planetary atmospheres

NASA Technical Reports Server (NTRS)

Pollack, J. B.; Yung, Y. L.

1980-01-01

The current understanding of the origin and evolution of the atmospheres of solar system objects is reviewed. Physical processes that control this evolution are described in an attempt to develop a set of general principles that can help guide studies of specific objects. Particular emphasis is placed on the planetary and satellite atmospheres of the inner solar system objects; current hypotheses on the origin and evolution of these objects are critically considered.

iMuseumA: an agent-based context-aware intelligent museum system.

PubMed

Ayala, Inmaculada; Amor, Mercedes; Pinto, Mónica; Fuentes, Lidia; Gámez, Nadia

2014-11-10

Currently, museums provide their visitors with interactive tour guide applications that can be installed in mobile devices and provide timely tailor-made multimedia information about exhibits on display. In this paper, we argue that mobile devices not only could provide help to visitors, but also to museum staff. Our goal is to integrate, within the same system, multimedia tour guides with the management facilities required by museums. In this paper, we present iMuseumA (intelligent museum with agents), a mobile-based solution to customize visits and perform context-aware management tasks. iMuseumA follows an agent-based approach, which makes it possible to interact easily with the museum environment and make decisions based on its current status. This system is currently deployed in the Museum of Informatics at the Informatics School of the University of Málaga, and its main contributions are: (i) a mobile application that provides management facilities to museum staff by means of sensing and processing environmental data; (ii) providing an integrated solution for visitors, tour guides and museum staff that allows coordination and communication enrichment among different groups of users; (iii) using and benefiting from group communication for heterogeneous groups of users that can be created on demand.

Magnetic resonance-guided prostate interventions.

PubMed

Haker, Steven J; Mulkern, Robert V; Roebuck, Joseph R; Barnes, Agnieska Szot; Dimaio, Simon; Hata, Nobuhiko; Tempany, Clare M C

2005-10-01

We review our experience using an open 0.5-T magnetic resonance (MR) interventional unit to guide procedures in the prostate. This system allows access to the patient and real-time MR imaging simultaneously and has made it possible to perform prostate biopsy and brachytherapy under MR guidance. We review MR imaging of the prostate and its use in targeted therapy, and describe our use of image processing methods such as image registration to further facilitate precise targeting. We describe current developments with a robot assist system being developed to aid radioactive seed placement.

An Air Force Guide for Effective Meeting Management

DTIC Science & Technology

2011-05-01

The inspection program to ensure its sustainment has faced increasing workload requirements due to structural issues related to heavy use and aging...26 Data Sources /Format...aircraft availability, the High Velocity Maintenance (HVM) concept is being implemented to replace the current PDM process for heavy maintenance

Interpersonal Forgiveness within the Helping Professions: An Attempt to Resolve Differences of Opinion.

ERIC Educational Resources Information Center

Enright, Robert D.; And Others

1992-01-01

Uses Lakatos's philosophy of science as guide for resolving published authors' differences of opinion about interpersonal forgiveness. Reviews ancient writings and current philosophical writings on interpersonal forgiveness. Critiques papers on forgiveness which have counseling implications. Describes process model of interpersonal forgiveness.…

Lessons learned from evaluating launch-site processing problems of Space Shuttle payloads

NASA Technical Reports Server (NTRS)

Flores, Carlos A.; Heuser, Robert E.; Sales, Johnny R.; Smith, Anthony M.

1992-01-01

The authors discuss a trend analysis program that is being conducted on the problem reports written during the processing of Space Shuttle payloads at Kennedy Space Center. The program is aimed at developing lessons learned that can both improve the effectiveness of the current payload processing cycles as well as help to guide the processing strategies for Space Station Freedom. The payload processing reports from STS 26R and STS 41 are used. A two-tier evaluation activity is described, and some typical results from the tier one analyses are presented.

The Critical Role of State Agencies in the Age of Evidence-Based Approaches: The Challenge of New Expectations.

PubMed

Van Dyke, Melissa K; Naoom, Sandra F

2016-01-01

Evidence-based approaches only benefit individuals when fully and effectively implemented. Since funding and monitoring alone will not ensure the full and effective implementation of effective strategies, state agencies have the opportunity to assess and modify current roles, functions, and policies to align with the requirements of evidence-based strategies. Based on a growing body of knowledge to guide effective implementation processes, state agencies, or designated partner organizations, can develop the capacity, mechanisms, and infrastructure to effectively implement evidence-based strategies. This article describes a framework that can guide this process. Informed by the literature and shaped by "real-world experience," the Active Implementation Frameworks provide a stage-matched approach to purposeful, active, and effective implementation.

Designing a Pedagogical Model for Web Engineering Education: An Evolutionary Perspective

ERIC Educational Resources Information Center

Hadjerrouit, Said

2005-01-01

In contrast to software engineering, which relies on relatively well established development approaches, there is a lack of a proven methodology that guides Web engineers in building reliable and effective Web-based systems. Currently, Web engineering lacks process models, architectures, suitable techniques and methods, quality assurance, and a…

Listening: The Second Speaker.

ERIC Educational Resources Information Center

Erway, Ella Anderson

1972-01-01

Scholars agree that listening is an active rather than a passive process. The listening which makes people achieve higher scores on current listening tests is "second speaker" listening or active participation in the encoding of the message. Most of the instructional suggestions in listening curriculum guides are based on this concept. In terms of…

Development and Interdependence. A One-Semester Model Curriculum for Secondary Schools and Undergraduate Colleges.

ERIC Educational Resources Information Center

Schaeffler, Walter S.; Collier, Anne B.

The interdisciplinary curriculum on global economic and social development and interdependence traces Western development trends, investigates current issues and processes in development, and offers a development planning exercise. An introductory section serves as a teacher's guide. It discusses the skills developed by the activities, suggests…

Ethical Issues in the Research of Group Work

ERIC Educational Resources Information Center

Goodrich, Kristopher M.; Luke, Melissa

2017-01-01

This article provides a primer for researchers exploring ethical issues in the research of group work. The article begins with an exploration of relevant ethical issues through the research process and current standards guiding its practice. Next, the authors identify resources that group work researchers can consult prior to constructing their…

Guiding and Modelling Quality Improvement in Higher Education Institutions

ERIC Educational Resources Information Center

Little, Daniel

2015-01-01

The article considers the process of creating quality improvement in higher education institutions from the point of view of current organisational theory and social-science modelling techniques. The author considers the higher education institution as a functioning complex of rules, norms and other organisational features and reviews the social…

Special Education Eligibility: A Step-by-Step Guide for Educators

ERIC Educational Resources Information Center

Pierangelo, Roger; Giuliani, George A.

2007-01-01

Understanding the criteria and process for determining a student's eligibility for special education services is critical for any educator in an inclusive school environment. Based on the current reauthorization of IDEA 2004, this timely resource offers teachers and administrators an overview of each eligible disability and clear, specific…

Snap! Catch Students' Attention with Mousetrap Vehicles

ERIC Educational Resources Information Center

Roberts, Ed; Gonzalez-Espada, Wilson J.

2006-01-01

The current paradigm in science education calls for greater emphasis on guiding students in active and extended scientific inquiry. This is supported by research suggesting that using a hands-on approach to learning fosters ownership in the learning process and allows students to gain greater appreciation for the design and implementation of…

Career Counseling and the Information Highway: Heeding the Road Signs.

ERIC Educational Resources Information Center

O'Halloran, Theresa M.; Fahr, Alicia V.; Keller, Jenny R.

2002-01-01

Traveling the "information highway" in the process of career counseling or providing career counseling services via the Internet pose additional challenges for counselors. The authors use current ethical guidelines to guide discussion of, and possible resolutions to, challenges posed by incorporating the Internet into career counseling. (Contains…

Project Overview: A Reef Manager's Guide to Coral Bleaching ...

EPA Pesticide Factsheets

The purpose of this report is to provide the latest scientific knowledge and discuss available management options to assist local and regional managers in responding effectively to mass coral bleaching events. Background A Reef Manager’s Guide to Coral Bleaching is the result of a collaborative effort by over 50 scientists and managers to: (1) share the best available scientific information on climate-related coral bleaching; and (2) compile a tool kit of currently available strategies for adaptive management of coral reefs in a changing climate. The result is a compendium of current information, tools, and practical suggestions to aid managers in their efforts to protect reefs in a way that maximizes reef resilience in the face of continuing climate change. The Guide is a joint publication of the National Oceanic and Atmospheric Administration, the Great Barrier Reef Marine Park Authority, and The World Conservation Union, with author contributions from a variety of international partners from government agencies, non-governmental organizations, and academic institutions. EPA’s Office of Research and Development was a major contributor to the Guide through authorship and participation in the final review and editing process for the entire report. A Reef Manager’s Guide to Coral Bleaching is the result of a collaborative effort by over 50 scientists and managers to: (1) share the best available scientific information on climate-related coral blea

Particle-in-cell simulations of asymmetric guide-field reconnection: quadrupolar structure of Hall magnetic field

NASA Astrophysics Data System (ADS)

Schmitz, R. G.; Alves, M. V.; Barbosa, M. V. G.

2017-12-01

One of the most important processes that occurs in Earth's magnetosphere is known as magnetic reconnection (MR). This process can be symmetric or asymmetric, depending basically on the plasma density and magnetic field in both sides of the current sheet. A good example of symmetric reconnection in terrestrial magnetosphere occurs in the magnetotail, where these quantities are similar on the north and south lobes. In the dayside magnetopause MR is asymmetric, since the plasma regimes and magnetic fields of magnetosheath and magnetosphere are quite different. Symmetric reconnection has some unique signatures. For example, the formation of a quadrupolar structure of Hall magnetic field and a bipolar Hall electric field that points to the center of the current sheet. The different particle motions in the presence of asymmetries change these signatures, causing the quadrupolar pattern to be distorted and forming a bipolar structure. Also, the bipolar Hall electric field is modified and gives rise to a single peak pointing toward the magnetosheat, considering an example of magnetopause reconnection. The presence of a guide-field can also distort the quadrupolar pattern, by giving a shear angle across the current sheet and altering the symmetric patterns, according to previous simulations and observations. Recently, a quadrupolar structure was observed in an asymmetric guide-field MR event using MMS (Magnetospheric Multiscale) mission data [Peng et al., JGR, 2017]. This event shows clearly that the density asymmetry and the guide-field were not sufficient to form signatures of asymmetric reconnection. Using the particle-in-cell code iPIC3D [Markidis et al, Mathematics and Computers in Simulation, 2010] with the MMS data from this event used to define input parameters, we found a quadrupolar structure of Hall magnetic field and a bipolar pattern of Hall electric field in ion scales, showing that our results are in an excellent agreement with the MMS observations. To our knowledge, this is the first time PIC simulations show this kind of results, since previous simulations have predicted bipolar pattern in the asymmetric guide-field reconnection.

Statistical lamb wave localization based on extreme value theory

NASA Astrophysics Data System (ADS)

Harley, Joel B.

2018-04-01

Guided wave localization methods based on delay-and-sum imaging, matched field processing, and other techniques have been designed and researched to create images that locate and describe structural damage. The maximum value of these images typically represent an estimated damage location. Yet, it is often unclear if this maximum value, or any other value in the image, is a statistically significant indicator of damage. Furthermore, there are currently few, if any, approaches to assess the statistical significance of guided wave localization images. As a result, we present statistical delay-and-sum and statistical matched field processing localization methods to create statistically significant images of damage. Our framework uses constant rate of false alarm statistics and extreme value theory to detect damage with little prior information. We demonstrate our methods with in situ guided wave data from an aluminum plate to detect two 0.75 cm diameter holes. Our results show an expected improvement in statistical significance as the number of sensors increase. With seventeen sensors, both methods successfully detect damage with statistical significance.

Multi-scale structures of turbulent magnetic reconnection

DOE Office of Scientific and Technical Information (OSTI.GOV)

Nakamura, T. K. M., E-mail: takuma.nakamura@oeaw.ac.at; Nakamura, R.; Narita, Y.

2016-05-15

We have analyzed data from a series of 3D fully kinetic simulations of turbulent magnetic reconnection with a guide field. A new concept of the guide filed reconnection process has recently been proposed, in which the secondary tearing instability and the resulting formation of oblique, small scale flux ropes largely disturb the structure of the primary reconnection layer and lead to 3D turbulent features [W. Daughton et al., Nat. Phys. 7, 539 (2011)]. In this paper, we further investigate the multi-scale physics in this turbulent, guide field reconnection process by introducing a wave number band-pass filter (k-BPF) technique in whichmore » modes for the small scale (less than ion scale) fluctuations and the background large scale (more than ion scale) variations are separately reconstructed from the wave number domain to the spatial domain in the inverse Fourier transform process. Combining with the Fourier based analyses in the wave number domain, we successfully identify spatial and temporal development of the multi-scale structures in the turbulent reconnection process. When considering a strong guide field, the small scale tearing mode and the resulting flux ropes develop over a specific range of oblique angles mainly along the edge of the primary ion scale flux ropes and reconnection separatrix. The rapid merging of these small scale modes leads to a smooth energy spectrum connecting ion and electron scales. When the guide field is sufficiently weak, the background current sheet is strongly kinked and oblique angles for the small scale modes are widely scattered at the kinked regions. Similar approaches handling both the wave number and spatial domains will be applicable to the data from multipoint, high-resolution spacecraft observations such as the NASA magnetospheric multiscale (MMS) mission.« less

Multi-scale structures of turbulent magnetic reconnection

NASA Astrophysics Data System (ADS)

Nakamura, T. K. M.; Nakamura, R.; Narita, Y.; Baumjohann, W.; Daughton, W.

2016-05-01

We have analyzed data from a series of 3D fully kinetic simulations of turbulent magnetic reconnection with a guide field. A new concept of the guide filed reconnection process has recently been proposed, in which the secondary tearing instability and the resulting formation of oblique, small scale flux ropes largely disturb the structure of the primary reconnection layer and lead to 3D turbulent features [W. Daughton et al., Nat. Phys. 7, 539 (2011)]. In this paper, we further investigate the multi-scale physics in this turbulent, guide field reconnection process by introducing a wave number band-pass filter (k-BPF) technique in which modes for the small scale (less than ion scale) fluctuations and the background large scale (more than ion scale) variations are separately reconstructed from the wave number domain to the spatial domain in the inverse Fourier transform process. Combining with the Fourier based analyses in the wave number domain, we successfully identify spatial and temporal development of the multi-scale structures in the turbulent reconnection process. When considering a strong guide field, the small scale tearing mode and the resulting flux ropes develop over a specific range of oblique angles mainly along the edge of the primary ion scale flux ropes and reconnection separatrix. The rapid merging of these small scale modes leads to a smooth energy spectrum connecting ion and electron scales. When the guide field is sufficiently weak, the background current sheet is strongly kinked and oblique angles for the small scale modes are widely scattered at the kinked regions. Similar approaches handling both the wave number and spatial domains will be applicable to the data from multipoint, high-resolution spacecraft observations such as the NASA magnetospheric multiscale (MMS) mission.

Analytical model for describing ion guiding through capillaries in insulating polymers

NASA Astrophysics Data System (ADS)

Liu, Shi-Dong; Zhao, Yong-Tao; Wang, Yu-Yu; N, Stolterfoht; Cheng, Rui; Zhou, Xian-Ming; Xu, Hu-Shan; Xiao, Guo-Qing

2015-08-01

An analytical description for guiding of ions through nanocapillaries is given on the basis of previous work. The current entering into the capillary is assumed to be divided into a current fraction transmitted through the capillary, a current fraction flowing away via the capillary conductivity and a current fraction remaining within the capillary, which is responsible for its charge-up. The discharging current is assumed to be governed by the Frenkel-Poole process. At higher conductivities the analytical model shows a blocking of the ion transmission, which is in agreement with recent simulations. Also, it is shown that ion blocking observed in experiments is well reproduced by the analytical formula. Furthermore, the asymptotic fraction of transmitted ions is determined. Apart from the key controlling parameter (charge-to-energy ratio), the ratio of the capillary conductivity to the incident current is included in the model. Differences resulting from the nonlinear and linear limits of the Frenkel-Poole discharge are pointed out. Project supported by the Major State Basic Research Development Program of China (Grant No. 2010CB832902) and the National Natural Science Foundation of China (Grant Nos. 11275241, 11275238, 11105192, and 11375034).

Inert gas narcosis and the encoding and retrieval of long-term memory.

PubMed

Kneller, Wendy; Hobbs, Malcolm

2013-12-01

Prior research has indicated that inert gas narcosis (IGN) causes decrements in free recall memory performance and that these result from disruption of either encoding or self-guided search in the retrieval process. In a recent study we provided evidence, using a Levels of Processing approach, for the hypothesis that IGN affects the encoding of new information. The current study sought to replicate these results with an improved methodology. The effect of ambient pressure (111.5-212.8 kPa/1-11 msw vs. 456-516.8 kPa/35-41 msw) and level of processing (shallow vs. deep) on free recall memory performance was measured in 34 divers in the context of an underwater field experiment. Free recall was significantly worse at high ambient pressure compared to low ambient pressure in the deep processing condition (low pressure: M = 5.6; SD = 2.7; high pressure: M = 3.3; SD = 1.4), but not in the shallow processing condition (low pressure: M = 3.9; SD = 1.7; high pressure: M = 3.1; SD = 1.8), indicating IGN impaired memory ability in the deep processing condition. In the shallow water, deep processing improved recall over shallow processing but, significantly, this effect was eliminated in the deep water. In contrast to our earlier study this supported the hypothesis that IGN affects the self-guided search of information and not encoding. It is suggested that IGN may affect both encoding and self-guided search and further research is recommended.

Improving Building Construction Specifications in State and Local Governments

NASA Technical Reports Server (NTRS)

1980-01-01

State and local governments can benefit from master specifications systems that centralize data on all types of building materials, products, and processes. Most of these systems are organized according to the MASTERFORMAT system, which, along with guide specifications that require the insertion or deletion of standardized information, resulted from the specific needs of users and providers. For jurisdictions preparing their own specifications, staff time and cost are reduced. For those subcontracting the preparation, master specifications provide a means of evaluating the specifications submitted. Current management specification systems described include SPECINTACT, OMSPEC, MASTERPEC, and the NAVFAC, Corps of Engineers, and GSA guide specifications.

ASTEP user's guide and software documentation

NASA Technical Reports Server (NTRS)

Gliniewicz, A. S.; Lachowski, H. M.; Pace, W. H., Jr.; Salvato, P., Jr.

1974-01-01

The Algorithm Simulation Test and Evaluation Program (ASTEP) is a modular computer program developed for the purpose of testing and evaluating methods of processing remotely sensed multispectral scanner earth resources data. ASTEP is written in FORTRAND V on the UNIVAC 1110 under the EXEC 8 operating system and may be operated in either a batch or interactive mode. The program currently contains over one hundred subroutines consisting of data classification and display algorithms, statistical analysis algorithms, utility support routines, and feature selection capability. The current program can accept data in LARSC1, LARSC2, ERTS, and Universal formats, and can output processed image or data tapes in Universal format.

AN EIGHT WEEK SUMMER INSTITUTE TRAINING PROGRAM TO TRAIN INSTRUCTORS OF INSTRUMENTATION TECHNOLOGY.

ERIC Educational Resources Information Center

MCKEE, DELBERT A.

A SUMMER INSTITUTE IN INSTRUMENTATION TECHNOLOGY WAS HELD TO PROVIDE TEACHERS WITH CURRENT KNOWLEDGE ON AUTOMATIC, PROCESS-CONTROL INSTRUMENTATION. A PREVIOUSLY DEVELOPED GUIDE FOR A 2-YEAR, POST-HIGH SCHOOL CURRICULUM PROVIDED THE BASIS FOR INSTRUCTION AND DISCUSSION DURING THE INSTITUTE. THREE COURSES IN MEASUREMENT AND INSTRUMENT SHOP…

The Development of a Model of Culturally Responsive Science and Mathematics Teaching

ERIC Educational Resources Information Center

Hernandez, Cecilia M.; Morales, Amanda R.; Shroyer, M. Gail

2013-01-01

This qualitative theoretical study was conducted in response to the current need for an inclusive and comprehensive model to guide the preparation and assessment of teacher candidates for culturally responsive teaching. The process of developing a model of culturally responsive teaching involved three steps: a comprehensive review of the…

Fuels planning: science synthesis and integration

Treesearch

Rachel White; Sarah McCaffrey

2007-01-01

A century of fire suppression has created heavy fuel loads in many U.S. forests, leading to increasingly intense wildfires. Addressing this problem will require widespread fuels treatments, yet fuels treatment planners do not always have access to the current scientific information that can help guide their planning process. The Fuels Planning: Science Synthesis and...

Cultural Adaptation of the Strengthening Families Program 10-14 to Italian Families

ERIC Educational Resources Information Center

Ortega, Enrique; Giannotta, Fabrizia; Latina, Delia; Ciairano, Silvia

2012-01-01

Background: The family context has proven to be a useful target in which to apply prevention efforts aimed at child and adolescent health risk behaviors. There are currently a variety of cultural adaptation models that serve to guide the international adaptation of intervention programs. Objective: The cultural adaptation process and program…

Involving Stakeholders in Programme Theory Specification: Discussion of a Systematic, Consensus-Based Approach

ERIC Educational Resources Information Center

van Urk, Felix; Grant, Sean; Bonell, Chris

2016-01-01

The use of explicit programme theory to guide evaluation is widely recommended. However, practitioners and other partnering stakeholders often initiate programmes based on implicit theories, leaving researchers to explicate them before commencing evaluation. The current study aimed to apply a systematic method to undertake this process. We…

The Policy Delphi: A Method for Identifying Intended and Unintended Consequences of Educational Policy

ERIC Educational Resources Information Center

Manley, R. Adam

2013-01-01

This article highlights a rarely utilized but effective technique for identifying intended and unintended consequences of past or current policy or policy change. The author guides the reader through the process of identifying potential participants, contacting participants, developing the policy Delphi instrument, and analyzing the findings by…

Gavel to Gavel: A Guide to the Televised Proceedings of Congress. [Revised Edition].

ERIC Educational Resources Information Center

Green, Alan

Daily sessions of the U.S. Congress are currently televised by satellite to viewers across the United States. This booklet provides information on the role of communication systems in educating about democratic processes and informing viewers about legislative procedures. Two chapters, entitled "The Electronic Eye: The Merger of Technology…

The Indirect Effects of Maternal Emotion Socialization on Friendship Quality in Middle Childhood

ERIC Educational Resources Information Center

Blair, Bethany L.; Perry, Nicole B.; O'Brien, Marion; Calkins, Susan D.; Keane, Susan P.; Shanahan, Lilly

2014-01-01

Emotion development processes have long been linked to social competence in early childhood but rarely have these associations been examined in middle childhood or with relational outcomes. Guided by theories of interpersonal relationships and emotion socialization, the current study was designed to fill these gaps by examining a longitudinal…

An Activity Model for Scientific Inquiry

ERIC Educational Resources Information Center

Harwood, William

2004-01-01

Most people are frustrated with the current scientific method presented in textbooks. The scientific method--a simplistic model of the scientific inquiry process--fails in most cases to provide a successful guide to how science is done. This is not shocking, really. Many simple models used in science are quite useful within their limitations. When…

Using Digital Portfolio Process with Young Learners and Facilitation of Metacognition

ERIC Educational Resources Information Center

McCormick, Janel

2017-01-01

The current shift in U.S. educational reform toward standards and guiding frameworks that are more inclusive of twenty-first-century competencies has created a need for research regarding the assessment of these skills. Also, needing further exploration is an understanding of how these new learner-centered assessments may impact students.…

iMuseumA: An Agent-Based Context-Aware Intelligent Museum System

PubMed Central

Ayala, Inmaculada; Amor, Mercedes; Pinto, Mónica; Fuentes, Lidia; Gámez, Nadia

2014-01-01

Currently, museums provide their visitors with interactive tour guide applications that can be installed in mobile devices and provide timely tailor-made multimedia information about exhibits on display. In this paper, we argue that mobile devices not only could provide help to visitors, but also to museum staff. Our goal is to integrate, within the same system, multimedia tour guides with the management facilities required by museums. In this paper, we present iMuseumA (intelligent museum with agents), a mobile-based solution to customize visits and perform context-aware management tasks. iMuseumA follows an agent-based approach, which makes it possible to interact easily with the museum environment and make decisions based on its current status. This system is currently deployed in the Museum of Informatics at the Informatics School of the University of Málaga, and its main contributions are: (i) a mobile application that provides management facilities to museum staff by means of sensing and processing environmental data; (ii) providing an integrated solution for visitors, tour guides and museum staff that allows coordination and communication enrichment among different groups of users; (iii) using and benefiting from group communication for heterogeneous groups of users that can be created on demand. PMID:25390409

The 2005 Food Guide Pyramid: an opportunity lost?

PubMed

Chiuve, Stephanie E; Willett, Walter C

2007-11-01

Dietary quality has a vital role in the prevention of chronic disease. In 2005, the US Department of Agriculture released a new food guide, MyPyramid, because the previous pyramid was in substantial discordance with current scientific evidence. The US Department of Agriculture pyramids are the most visible source of US nutrition policy and dietary guidance and it is, therefore, imperative they provide scientifically derived recommendations for a healthy diet. Unfortunately, MyPyramid strays from much of the evidence generated through years of research and, in our opinion, fails to provide the public with clear information about healthy food choices. In this Review, we discuss the policy and process behind the development of MyPyramid, assess the current evidence linking diet to chronic diseases, including cardiovascular disease, cancer and diabetes, and suggest potential alternatives for dietary recommendations.

Development of a knowledge management system for complex domains.

PubMed

Perott, André; Schader, Nils; Bruder, Ralph; Leonhardt, Jörg

2012-01-01

Deutsche Flugsicherung GmbH, the German Air Navigation Service Provider, follows a systematic approach, called HERA, for investigating incidents. The HERA analysis shows a distinctive occurrence of incidents in German air traffic control in which the visual perception of information plays a key role. The reasons can be partially traced back to workstation design, where basic ergonomic rules and principles are not sufficiently followed by the designers in some cases. In cooperation with the Institute of Ergonomics in Darmstadt the DFS investigated possible approaches that may support designers to implement ergonomic systems. None of the currently available tools were found to be able to meet the identified user requirements holistically. Therefore it was suggested to develop an enhanced software tool called Design Process Guide. The name Design Process Guide indicates that this tool exceeds the classic functions of currently available Knowledge Management Systems. It offers "design element" based access, shows processual and content related topics, and shows the implications of certain design decisions. Furthermore, it serves as documentation, detailing why a designer made to a decision under a particular set of conditions.

Optimization of a Light Collection System for use in the Neutron Lifetime Project

NASA Astrophysics Data System (ADS)

Taylor, C.; O'Shaughnessy, C.; Mumm, P.; Thompson, A.; Huffman, P.

2007-10-01

The Ultracold Neutron (UCN) Lifetime Project is an ongoing experiment with the objective of improving the average measurement of the neutron beta-decay lifetime. A more accurate measurement may increase our understanding of the electroweak interaction and improve astrophysical/cosmological theories on Big Bang nucleosynthesis. The current apparatus uses 0.89 nm cold neutrons to produce UCN through inelastic collisions with superfluid 4He in the superthermal process. The lifetime of the UCN is measured by detection of scintillation light from superfluid 4He created by electrons produced in neutron decay. Competing criteria of high detection efficiency outside of the apparatus and minimum heating of the experimental cell has led to the design of an acrylic light collection system. Initial designs were based on previous generations of the apparatus. ANSYS was used to optimize the cooling system for the light guide by checking simulated end conditions based on width of contact area, number of contact points, and location on the guide itself. SolidWorks and AutoCAD were used for design. The current system is in the production process.

Image-guided radiation therapy in lymphoma management

PubMed Central

Eng, Tony

2015-01-01

Image-guided radiation therapy (IGRT) is a process of incorporating imaging techniques such as computed tomography (CT), magnetic resonance imaging (MRI), Positron emission tomography (PET), and ultrasound (US) during radiation therapy (RT) to improve treatment accuracy. It allows real-time or near real-time visualization of anatomical information to ensure that the target is in its position as planned. In addition, changes in tumor volume and location due to organ motion during treatment can be also compensated. IGRT has been gaining popularity and acceptance rapidly in RT over the past 10 years, and many published data have been reported on prostate, bladder, head and neck, and gastrointestinal cancers. However, the role of IGRT in lymphoma management is not well defined as there are only very limited published data currently available. The scope of this paper is to review the current use of IGRT in the management of lymphoma. The technical and clinical aspects of IGRT, lymphoma imaging studies, the current role of IGRT in lymphoma management and future directions will be discussed. PMID:26484299

Investigations of plasmoid reconnection in the presence of strong guide fields in CHI plasma start-up on HIST

NASA Astrophysics Data System (ADS)

Nagata, Masayoshi; Fujita, Akihiro; Ibragi, Youhei; Matsui, Takahiro; Kikuchi, Yusuke; Fukumoto, Naoyuki; Kanki, Takashi

2017-10-01

Plasmoid magnetic reconnections have been examined in the Coaxial Helicity Injection (CHI) experiments on HIST. Magnetic reconnections are required for the formation of closed flux surfaces in the transient-CHI start-up plasmas. So far, we have observed formation of plasmoids inside an elongated current layer to create the multiple X-points during the CHI process. According to the MHD simulation by F. Ebrahimi and R. Raman, the reconnection rate based on the plasmoid instability is faster than that by Sweet-Parker (S-P) model. To estimate the Lundquist number S number, we have measured spatial profiles of magnetic field strength, electron density and temperature in the current layer. In this meeting, we will present the effect of the guide (toroidal) magnetic field and mass (H, D and He) on the current layer thickness and reconnection rates of plasmoids. It is found that behavior of plasmoids is synchronized with Ion Doppler temperature, leading to ion heating.

End-of-Life Decision Making in Palliative Care and Recommendations of the Council of Europe: Qualitative Secondary Analysis of Interviews and Observation Field Notes.

PubMed

Martins Pereira, Sandra; Fradique, Emília; Hernández-Marrero, Pablo

2018-05-01

End-of-life decisions (ELDs) are embedded in clinical, sociocultural, political, economic, and ethical concerns. In 2014, the Council of Europe (CoE) through its Committee on Bioethics launched the "Guide on the decision-making process regarding medical treatment in end-of-life situations," aiming at improving decision-making processes and empowering professionals in making ELDs. To analyze if end-of-life decision making in palliative care (PC) is consistent with this Guide and to identify if disputed/controversial issues are part of current ELDs. Qualitative secondary analysis. Four qualitative datasets, including 44 interviews and 9 team observation field notes from previous studies with PC teams/professionals in Portugal. An analysis grid based on the abovementioned guide was created considering three dimensions: ethical and legal frameworks, decision-making process, and disputed/controversial issues. The majority of the professionals considered the ethical principle of autonomy paramount in end-of-life decision making. Justice and beneficence/nonmaleficence were also valued. Although not mentioned in the Guide, the professionals also considered other ethical principles when making ELDs, namely, responsibility, integrity, and dignity. Most of the interviewees and field notes referred to the collective interprofessional dimension of the decision-making process. Palliative sedation and the wish to hasten death were the most mentioned disputed/controversial issues. The nature, limitations, and benefits of qualitative secondary analysis are discussed. End-of-life decision-making processes made by Portuguese PC teams seem to be consistent with the guidelines of the CoE. Further research is needed about disputed/controversial issues and the actual use, effectiveness, and impact of ethical guidelines for end-of-life decision making on professionals' empowerment and for all parties involved.

Video-guided calibration of an augmented reality mobile C-arm.

PubMed

Chen, Xin; Naik, Hemal; Wang, Lejing; Navab, Nassir; Fallavollita, Pascal

2014-11-01

The augmented reality (AR) fluoroscope augments an X-ray image by video and provides the surgeon with a real-time in situ overlay of the anatomy. The overlay alignment is crucial for diagnostic and intra-operative guidance, so precise calibration of the AR fluoroscope is required. The first and most complex step of the calibration procedure is the determination of the X-ray source position. Currently, this is achieved using a biplane phantom with movable metallic rings on its top layer and fixed X-ray opaque markers on its bottom layer. The metallic rings must be moved to positions where at least two pairs of rings and markers are isocentric in the X-ray image. The current "trial and error" calibration process currently requires acquisition of many X-ray images, a task that is both time consuming and radiation intensive. An improved process was developed and tested for C-arm calibration. Video guidance was used to drive the calibration procedure to minimize both X-ray exposure and the time involved. For this, a homography between X-ray and video images is estimated. This homography is valid for the plane at which the metallic rings are positioned and is employed to guide the calibration procedure. Eight users having varying calibration experience (i.e., 2 experts, 2 semi-experts, 4 novices) were asked to participate in the evaluation. The video-guided technique reduced the number of intra-operative X-ray calibration images by 89% and decreased the total time required by 59%. A video-based C-arm calibration method has been developed that improves the usability of the AR fluoroscope with a friendlier interface, reduced calibration time and clinically acceptable radiation doses.

Knob manager (KM) operators guide

DOE Office of Scientific and Technical Information (OSTI.GOV)

NONE

1993-10-08

KM, Knob Manager, is a tool which enables the user to use the SUNDIALS knob box to adjust the settings of the control system. The followings are some features of KM: dynamic knob assignments with the user friendly interface; user-defined gain for individual knob; graphical displays for operating range and status of each process variable is assigned; backup and restore one or multiple process variable; save current settings to a file and recall the settings from that file in future.

Examining psychological inflexibility as a transdiagnostic process across psychological disorders

PubMed Central

Levin, Michael E.; MacLane, Chelsea; Daflos, Susan; Seeley, John; Hayes, Steven C.; Biglan, Anthony; Pistorello, Jacqueline

2017-01-01

The current cross-sectional study examined psychological inflexibility, a process in which behavior is rigidly guided by psychological reactions rather than direct contingencies or personal values, as a transdiagnostic process relevant to a range of depressive, anxiety, substance use and eating disorders. A sample of 972 first-year college students between 17 and 20 years of age completed self-report measures of psychological inflexibility and psychological distress as well as a structured diagnostic interview. Psychological inflexibility was significantly higher across a range of current and lifetime depressive and anxiety disorders as well as lifetime history of eating disorders, relative to students with no disorder, even after controlling for general psychological distress. Findings were mixed for substance use disorders, with a more consistent pattern for lifetime history than for current disorders. Psychological inflexibility was also related to having comorbid depressive, anxiety, and substance use disorders relative to only having one of these diagnoses. Results are discussed in relation to research on psychological inflexibility as a transdiagnostic pathological process and target for interventions. PMID:29057212

Current external beam radiation therapy quality assurance guidance: does it meet the challenges of emerging image-guided technologies?

PubMed

Palta, Jatinder R; Liu, Chihray; Li, Jonathan G

2008-01-01

The traditional prescriptive quality assurance (QA) programs that attempt to ensure the safety and reliability of traditional external beam radiation therapy are limited in their applicability to such advanced radiation therapy techniques as three-dimensional conformal radiation therapy, intensity-modulated radiation therapy, inverse treatment planning, stereotactic radiosurgery/radiotherapy, and image-guided radiation therapy. The conventional QA paradigm, illustrated by the American Association of Physicists in Medicine Radiation Therapy Committee Task Group 40 (TG-40) report, consists of developing a consensus menu of tests and device performance specifications from a generic process model that is assumed to apply to all clinical applications of the device. The complexity, variation in practice patterns, and level of automation of high-technology radiotherapy renders this "one-size-fits-all" prescriptive QA paradigm ineffective or cost prohibitive if the high-probability error pathways of all possible clinical applications of the device are to be covered. The current approaches to developing comprehensive prescriptive QA protocols can be prohibitively time consuming and cost ineffective and may sometimes fail to adequately safeguard patients. It therefore is important to evaluate more formal error mitigation and process analysis methods of industrial engineering to more optimally focus available QA resources on process components that have a significant likelihood of compromising patient safety or treatment outcomes.

Touch the Sky: A Guide for Tribal and Community College Transfer Students.

ERIC Educational Resources Information Center

Robbins, Rebecca L.

This handbook aims to acquaint American Indian college transfer students with the transfer process and to help both high school and community college students succeed in getting a degree from the 4-year institution of their choice. Chapters 1-2 introduce the handbook; examine the important role of tribal colleges; describe the current state of…

Working Memory Deficits in Boys with Attention-Deficit/Hyperactivity Disorder (ADHD): The Contribution of Central Executive and Subsystem Processes

ERIC Educational Resources Information Center

Rapport, Mark D.; Alderson, R. Matt; Kofler, Michael J.; Sarver, Dustin E.; Bolden, Jennifer; Sims, Valerie

2008-01-01

The current study investigated contradictory findings from recent experimental and meta-analytic studies concerning working memory deficits in ADHD. Working memory refers to the cognitive ability to temporarily store and mentally manipulate limited amounts of information for use in guiding behavior. Phonological (verbal) and visuospatial…

Discrimination and Adjustment for Mexican American Adolescents: A Prospective Examination of the Benefits of Culturally Related Values

ERIC Educational Resources Information Center

Berkel, Cady; Knight, George P.; Zeiders, Katharine H.; Tein, Jenn-Yun; Roosa, Mark W.; Gonzales, Nancy A.; Saenz, Delia

2010-01-01

Mexican American adolescents face disparities in mental health and academic achievement, perhaps in part because of discrimination experiences. However, culturally related values, fostered by ethnic pride and socialization, may serve to mitigate the negative impact of discrimination. Guided by the Stress Process Model, the current study examined…

Using Microsoft Excel to Assess Standards: A "Techtorial". Article #2 in a 6-Part Series

ERIC Educational Resources Information Center

Mears, Derrick

2009-01-01

Standards-based assessment is a term currently being used quite often in educational reform discussions. The philosophy behind this initiative is to utilize "standards" or "benchmarks" to focus instruction and assessments of student learning. The National Standards for Physical Education (NASPE, 2004) provide a framework to guide this process for…

Your Child's Growing Mind: A Guide to Learning and Brain Development from Birth to Adolescence. Revised.

ERIC Educational Resources Information Center

Healy, Jane M.

Noting that understanding a child's brain and the way it develops is the key to understanding learning, this book explores the relationship between brain physiology and children's learning processes. The book first translates the most current scientific theories on nervous-system development into practical information for parents. It then details…

Fire history of a western Montana ponderosa pine grassland: A pilot study

Treesearch

Don V. Gayton; Marc H. Weber; Mick Harrington; Emily K. Heyerdahl; Elaine K. Sutherland; Bob Brett; Cindy Hall; Micahel Hartman; Liesl Peterson; Carolynne Merrel

2006-01-01

A primary goal in the management of forests and grasslands is to maintain community structure and disturbance processes within their historical range of variation. If, within a managed ecosystem, either is found to lie outside that range, restoration may be necessary. Both maintenance and restoration are currently guided by the principles of ecosystem management, which...

A Celebration of Neurons: An Educator's Guide to the Human Brain.

ERIC Educational Resources Information Center

Sylwester, Robert

This book provides an introduction to the current scientific understanding of the human brain and its processes. Chapter 1, "At the Edge of a Major Transformation," is an introduction to the field. Chapter 2, "How Our Brain Organizes Itself on the Cellular and Systems Levels," covers what body/brain cellular systems do, how…

Towards a Personal Best: A Case for Introducing Ipsative Assessment in Higher Education

ERIC Educational Resources Information Center

Hughes, Gwyneth

2011-01-01

The central role that assessment plays is recognised in higher education, in particular how formative feedback guides learning. A model for effective feedback practice is used to argue that, in current schemes, formative feedback is often not usable because it is strongly linked to external criteria and standards, rather than to the processes of…

Review of Pearson Test of English Academic: Building an Assessment Use Argument

ERIC Educational Resources Information Center

Wang, Huan; Choi, Ikkyu; Schmidgall, Jonathan; Bachman, Lyle F.

2012-01-01

This review departs from current practice in reviewing tests in that it employs an "argument-based approach" to test validation to guide the review (e.g. Bachman, 2005; Kane, 2006; Mislevy, Steinberg, & Almond, 2002). Specifically, it follows an approach to test development and use that Bachman and Palmer (2010) call the process of "assessment…

Assessment, Referral and Placement Kit for Adult Literacy & Basic Education Programs in Victoria.

ERIC Educational Resources Information Center

Purdey, Margaret

This kit is an aid to the assessment, referral, placement, and recognition of achievement of adult literacy and basic education students across Victoria (Australia). It is designed as a guide to the integration of current assessment with new placement processes within the context of the new Adult Basic Education Accreditation Framework and the…

Intelligent vision guide for automatic ventilation grommet insertion into the tympanic membrane.

PubMed

Gao, Wenchao; Tan, Kok Kiong; Liang, Wenyu; Gan, Chee Wee; Lim, Hsueh Yee

2016-03-01

Otitis media with effusion is a worldwide ear disease. The current treatment is to surgically insert a ventilation grommet into the tympanic membrane. A robotic device allowing automatic grommet insertion has been designed in a previous study; however, the part of the membrane where the malleus bone is attached to the inner surface is to be avoided during the insertion process. This paper proposes a synergy of optical flow technique and a gradient vector flow active contours algorithm to achieve an online tracking of the malleus under endoscopic vision, to guide the working channel to move efficiently during the surgery. The proposed method shows a more stable and accurate tracking performance than the current tracking methods in preclinical tests. With satisfactory tracking results, vision guidance of a suitable insertion spot can be provided to the device to perform the surgery in an automatic way. Copyright © 2015 John Wiley & Sons, Ltd.

Comprehensive Areal Model of Earthquake-Induced Landslides: Technical Specification and User Guide

USGS Publications Warehouse

Miles, Scott B.; Keefer, David K.

2007-01-01

This report describes the complete design of a comprehensive areal model of earthquakeinduced landslides (CAMEL). This report presents the design process, technical specification of CAMEL. It also provides a guide to using the CAMEL source code and template ESRI ArcGIS map document file for applying CAMEL, both of which can be obtained by contacting the authors. CAMEL is a regional-scale model of earthquake-induced landslide hazard developed using fuzzy logic systems. CAMEL currently estimates areal landslide concentration (number of landslides per square kilometer) of six aggregated types of earthquake-induced landslides - three types each for rock and soil.

Fluorescence-guided tumor visualization using a custom designed NIR attachment to a surgical microscope for high sensitivity imaging (Conference Presentation)

NASA Astrophysics Data System (ADS)

Kittle, David S.; Patil, Chirag G.; Mamelak, Adam; Hansen, Stacey; Perry, Jeff; Ishak, Laura; Black, Keith L.; Butte, Pramod V.

2016-03-01

Current surgical microscopes are limited in sensitivity for NIR fluorescence. Recent developments in tumor markers attached with NIR dyes require newer, more sensitive imaging systems with high resolution to guide surgical resection. We report on a small, single camera solution enabling advanced image processing opportunities previously unavailable for ultra-high sensitivity imaging of these agents. The system captures both visible reflectance and NIR fluorescence at 300 fps while displaying full HD resolution video at 60 fps. The camera head has been designed to easily mount onto the Zeiss Pentero microscope head for seamless integration into surgical procedures.

Development and Use of Engineering Standards for Computational Fluid Dynamics for Complex Aerospace Systems

NASA Technical Reports Server (NTRS)

Lee, Hyung B.; Ghia, Urmila; Bayyuk, Sami; Oberkampf, William L.; Roy, Christopher J.; Benek, John A.; Rumsey, Christopher L.; Powers, Joseph M.; Bush, Robert H.; Mani, Mortaza

2016-01-01

Computational fluid dynamics (CFD) and other advanced modeling and simulation (M&S) methods are increasingly relied on for predictive performance, reliability and safety of engineering systems. Analysts, designers, decision makers, and project managers, who must depend on simulation, need practical techniques and methods for assessing simulation credibility. The AIAA Guide for Verification and Validation of Computational Fluid Dynamics Simulations (AIAA G-077-1998 (2002)), originally published in 1998, was the first engineering standards document available to the engineering community for verification and validation (V&V) of simulations. Much progress has been made in these areas since 1998. The AIAA Committee on Standards for CFD is currently updating this Guide to incorporate in it the important developments that have taken place in V&V concepts, methods, and practices, particularly with regard to the broader context of predictive capability and uncertainty quantification (UQ) methods and approaches. This paper will provide an overview of the changes and extensions currently underway to update the AIAA Guide. Specifically, a framework for predictive capability will be described for incorporating a wide range of error and uncertainty sources identified during the modeling, verification, and validation processes, with the goal of estimating the total prediction uncertainty of the simulation. The Guide's goal is to provide a foundation for understanding and addressing major issues and concepts in predictive CFD. However, this Guide will not recommend specific approaches in these areas as the field is rapidly evolving. It is hoped that the guidelines provided in this paper, and explained in more detail in the Guide, will aid in the research, development, and use of CFD in engineering decision-making.

The TIMS Data User's Workshop

NASA Technical Reports Server (NTRS)

Kahle, Anne B. (Editor); Abbott, Elsa (Editor)

1986-01-01

A workshop was held to bring together all users of data from NASA's airborne Thermal Infrared Multispectral Scanner (TIMS). The purpose was to allow users to compare results, data processing algorithms, and problems encountered; to update the users on the latest instrument changes and idiosyncracies, including distribution of the TIMS investigation guide; to inform the users of the wide range of problems that are currently being tackled by other TIMS investigators; to explore ways to expand the user community; to discuss current areas where more basic research is required; and to discuss the future directions of NASA's thermal infrared remote sensing programs. Also discussed were: geology, land use, archeology; and data processing and noise research.

Adaptation of the European Commission-recommended user testing method to patient medication information leaflets in Japan.

PubMed

Yamamoto, Michiko; Doi, Hirohisa; Yamamoto, Ken; Watanabe, Kazuhiro; Sato, Tsugumichi; Suka, Machi; Nakayama, Takeo; Sugimori, Hiroki

2017-01-01

The safe use of drugs relies on providing accurate drug information to patients. In Japan, patient leaflets called Drug Guide for Patients are officially available; however, their utility has never been verified. This is the first attempt to improve Drug Guide for Patients via user testing in Japan. To test and improve communication of drug information to minimize risk for patients via user testing of the current and revised versions of Drug Guide for Patients, and to demonstrate that this method is effective for improving Drug Guide for Patients in Japan. We prepared current and revised versions of the Drug Guide for Patients and performed user testing via semi-structured interviews with consumers to compare these versions for two guides for Mercazole and Strattera. We evenly divided 54 participants into two groups with similar distributions of sex, age, and literacy level to test the differing versions of the Mercazole guide. Another group of 30 participants were divided evenly to test the versions of the Strattera guide. After completing user testing, the participants evaluated both guides in terms of amount of information, readability, usefulness of information, and layout and appearance. Participants were also asked for their opinions on the leaflets. Response rates were 100% for both Mercazole and Strattera. The revised versions of both Guides were superior or equal to the current versions in terms of accessibility and understandability. The revised version of the Mercazole guide showed better ratings for readability, usefulness of information, and layout ( p <0.01) than did the current version, while that for Strattera showed superior readability and layout ( p <0.01). User testing was effective for evaluating the utility of Drug Guide for Patients. Additionally, the revised version had superior accessibility and understandability.

JWST Operations and the Phase I and II Process

NASA Astrophysics Data System (ADS)

Beck, Tracy L.

2010-07-01

The JWST operations and Phase I and Phase II process will build upon our knowledge on the current system in use for HST. The primary observing overheads associated with JWST observations, both direct and indirect, are summarized. While some key operations constraints for JWST may cause deviations from the HST model for proposal planning, the overall interface to JWST planning will use the APT and will appear similar to the HST interface. The requirement is to have a proposal planning model simlar to HST, where proposals submitted to the TAC must have at least the minimum amount of information necessary for assessment of the strength of the science. However, a goal of the JWST planning process is to have the submitted Phase I proposal in executable form, and as complete as possible for many programs. JWST will have significant constraints on the spacecraft pointing and orient, so it is beneficial for the planning process to have these scheduling constraints on programs defined as early as possible. The guide field of JWST is also much smaller than the HST guide field, so searches for available guide stars for JWST science programs must be done at the Phase I deadline. The long range observing plan for each JWST cycle will be generated intially from the TAC accepted programs at the Phase I deadline, and the LRP will be refined after the Phase II deadline when all scheduling constraints are defined.

Preparing for Phase II: A Guide to the Pay/Personnel Administrative Support System (PASS) Source Data System (SDS) Site Preparation Process for PASS Field Managers.

DTIC Science & Technology

1981-06-01

of standard reports are: 1. Activity Locator; 2. Report of Active Duty Obligations and Projected Rotation Date; and 3. Enlisted Personnel Advancement ... advancement in rate, etc.), currently used forms are listed and analyzed to determine how such transactions are processed under the existing system...to suport an SDS functional organization. It is emphasized that configuration design should consider the requirements which will be imposed under all

Grazing Incidence Neutron Optics

NASA Technical Reports Server (NTRS)

Gubarev, Mikhail V. (Inventor); Ramsey, Brian D. (Inventor); Engelhaupt, Darell E. (Inventor)

2013-01-01

Neutron optics based on the two-reflection geometries are capable of controlling beams of long wavelength neutrons with low angular divergence. The preferred mirror fabrication technique is a replication process with electroform nickel replication process being preferable. In the preliminary demonstration test an electroform nickel optics gave the neutron current density gain at the focal spot of the mirror at least 8 for neutron wavelengths in the range from 6 to 20.ANG.. The replication techniques can be also be used to fabricate neutron beam controlling guides.

Grazing incidence neutron optics

NASA Technical Reports Server (NTRS)

Gubarev, Mikhail V. (Inventor); Ramsey, Brian D. (Inventor); Engelhaupt, Darell E. (Inventor)

2012-01-01

Neutron optics based on the two-reflection geometries are capable of controlling beams of long wavelength neutrons with low angular divergence. The preferred mirror fabrication technique is a replication process with electroform nickel replication process being preferable. In the preliminary demonstration test an electroform nickel optics gave the neutron current density gain at the focal spot of the mirror at least 8 for neutron wavelengths in the range from 6 to 20 .ANG.. The replication techniques can be also be used to fabricate neutron beam controlling guides.

The Effect of a Guide Field on the Structures of Magnetic Islands: 2D PIC Simulations

NASA Astrophysics Data System (ADS)

Huang, C.; Lu, Q.; Lu, S.; Wang, P.; Wang, S.

2014-12-01

Magnetic island plays an important role in magnetic reconnection. Using a series of 2D PIC simulations, we investigate the magnetic structures of a magnetic island formed during multiple X-line magnetic reconnection, considering the effects of the guide field in symmetric and asymmetric current sheets. In a symmetric current sheet, the current in the direction forms a tripolar structure inside a magnetic island during anti-parallel reconnection, which results in a quadrupole structure of the out-of-plane magnetic field. With the increase of the guide field, the symmetry of both the current system and out-of-plane magnetic field inside the magnetic island is distorted. When the guide field is sufficiently strong, the current forms a ring along the magnetic field lines inside magnetic island. At the same time, the current carried by the energetic electrons accelerated in the vicinity of the X lines forms another ring at the edge of the magnetic island. Such a dual-ring current system enhance the out-of-plane magnetic field inside the magnetic island with a dip in the center of the magnetic island. In an asymmetric current sheet, when there is no guide field, electrons flows toward the X lines along the separatrices from the side with a higher density, and are then directed away from the X lines along the separatrices to the side with a lower density. The formed current results in the enhancement of the out-of-plane magnetic field at one end of the magnetic island, and the attenuation at the other end. With the increase of the guide field, the structures of both the current system and the out-of-plane magnetic field are distorted.

The effect of a guide field on the structures of magnetic islands formed during multiple X line reconnections: Two-dimensional particle-in-cell simulations

NASA Astrophysics Data System (ADS)

Huang, Can; Lu, Quanming; Lu, San; Wang, Peiran; Wang, Shui

2014-02-01

A magnetic island plays an important role in magnetic reconnection. In this paper, using a series of two-dimensional particle-in-cell simulations, we investigate the magnetic structures of a magnetic island formed during multiple X line magnetic reconnections, considering the effects of the guide field in symmetric and asymmetric current sheets. In a symmetric current sheet, the current in the x direction forms a tripolar structure inside a magnetic island during antiparallel reconnection, which results in a quadrupole structure of the out-of-plane magnetic field. With the increase of the guide field, the symmetry of both the current system and out-of-plane magnetic field inside the magnetic island is distorted. When the guide field is sufficiently strong, the current forms a ring along the magnetic field lines inside a magnetic island. At the same time, the current carried by the energetic electrons accelerated in the vicinity of the X lines forms another ring at the edge of the magnetic island. Such a dual-ring current system enhances the out-of-plane magnetic field inside the magnetic island with a dip in the center of the magnetic island. In an asymmetric current sheet, when there is no guide field, electrons flow toward the X lines along the separatrices from the side with a higher density and are then directed away from the X lines along the separatrices to the side with a lower density. The formed current results in the enhancement of the out-of-plane magnetic field at one end of the magnetic island and the attenuation at the other end. With the increase of the guide field, the structures of both the current system and the out-of-plane magnetic field are distorted.

Gyrokinetic and kinetic particle-in-cell simulations of guide-field reconnection. I. Macroscopic effects of the electron flows

DOE Office of Scientific and Technical Information (OSTI.GOV)

Muñoz, P. A., E-mail: munozp@mps.mpg.de; Kilian, P.; Büchner, J.

In this work, we compare gyrokinetic (GK) with fully kinetic Particle-in-Cell (PIC) simulations of magnetic reconnection in the limit of strong guide field. In particular, we analyze the limits of applicability of the GK plasma model compared to a fully kinetic description of force free current sheets for finite guide fields (b{sub g}). Here, we report the first part of an extended comparison, focusing on the macroscopic effects of the electron flows. For a low beta plasma (β{sub i} = 0.01), it is shown that both plasma models develop magnetic reconnection with similar features in the secondary magnetic islands if a sufficientlymore » high guide field (b{sub g} ≳ 30) is imposed in the kinetic PIC simulations. Outside of these regions, in the separatrices close to the X points, the convergence between both plasma descriptions is less restrictive (b{sub g} ≳ 5). Kinetic PIC simulations using guide fields b{sub g} ≲ 30 reveal secondary magnetic islands with a core magnetic field and less energetic flows inside of them in comparison to the GK or kinetic PIC runs with stronger guide fields. We find that these processes are mostly due to an initial shear flow absent in the GK initialization and negligible in the kinetic PIC high guide field regime, in addition to fast outflows on the order of the ion thermal speed that violate the GK ordering. Since secondary magnetic islands appear after the reconnection peak time, a kinetic PIC/GK comparison is more accurate in the linear phase of magnetic reconnection. For a high beta plasma (β{sub i} = 1.0) where reconnection rates and fluctuations levels are reduced, similar processes happen in the secondary magnetic islands in the fully kinetic description, but requiring much lower guide fields (b{sub g} ≲ 3)« less

The Eatwell Guide: Modelling the Health Implications of Incorporating New Sugar and Fibre Guidelines.

PubMed

Cobiac, Linda J; Scarborough, Peter; Kaur, Asha; Rayner, Mike

2016-01-01

To model population health impacts of dietary changes associated with the redevelopment of the UK food-based dietary guidelines (the 'Eatwell Guide'). Using multi-state lifetable methods, we modelled the impact of dietary changes on cardiovascular disease, diabetes and cancers over the lifetime of the current UK population. From this model, we determined change in life expectancy and disability-adjusted life years (DALYs) that could be averted. Changing the average diet to that recommended in the new Eatwell Guide, without increasing total energy intake, could increase average life expectancy by 5.4 months (95% uncertainty interval: 4.7 to 6.2) for men and 4.0 months (3.4 to 4.6) for women; and avert 17.9 million (17.6 to 18.2) DALYs over the lifetime of the current population. A large proportion of the health benefits are from prevention of type 2 diabetes, with 440,000 (400,000 to 480,000) new cases prevented in men and 340,000 (310,000 to 370,000) new cases prevented in women, over the next ten years. Prevention of cardiovascular diseases and colorectal cancer is also large. However, if the diet recommended in the new Eatwell Guide is achieved with an accompanying increase in energy intake (and thus an increase in body mass index), around half the potential improvements in population health will not be realised. The dietary changes required to meet recommendations in the Eatwell Guide, which include eating more fruits and vegetables and less red and processed meats and dairy products, are large. However, the potential population health benefits are substantial.

A new resource for developing and strengthening large-scale community health worker programs.

PubMed

Perry, Henry; Crigler, Lauren; Lewin, Simon; Glenton, Claire; LeBan, Karen; Hodgins, Steve

2017-01-12

Large-scale community health worker programs are now growing in importance around the world in response to the resurgence of interest and growing evidence of the importance of community-based primary health care for improving the health of populations in resource-constrained, high-mortality settings. These programs, because of their scale and operational challenges, merit special consideration by the global health community, national policy-makers, and program implementers. A new online resource is now available to assist in that effort: Developing and Strengthening Community Health Worker Programs at Scale: A Reference Guide and Case Studies for Program Managers and Policymakers ( http://www.mchip.net/CHWReferenceGuide ). This CHW Reference Guide is the product of 27 different collaborators who, collectively, have a formidable breadth and depth of experience and knowledge about CHW programming around the world. It provides a thoughtful discussion about the many operational issues that large-scale CHW programs need to address as they undergo the process of development, expansion or strengthening. Detailed case studies of 12 national CHW programs are included in the Appendix-the most current and complete cases studies as a group that are currently available. Future articles in this journal will highlight many of the themes in the CHW Reference Guide and provide an update of recent advances and experiences. These articles will serve, we hope, to (1) increase awareness about the CHW Reference Guide and its usefulness and (2) connect a broader audience to the critical importance of strengthening large-scale CHW programs for the health benefits that they can bring to underserved populations around the world.

Human Aided Reinforcement Learning in Complex Environments

DTIC Science & Technology

learn to solve tasks through a trial -and- error process. As an agent takes ...task faster andmore accurately, a human expert can be added to the system to guide an agent in solving the task. This project seeks to expand on current...theenvironment, which works particularly well for reactive tasks . In more complex tasks , these systems do not work as intended. The manipulation

Returning to the Job Market: A Woman's Guide to Employment Planning.

ERIC Educational Resources Information Center

American Association of Retired Persons, Washington, DC.

Intended for midlife and older women in the job market, this booklet is designed to help them in the process of looking for work outside the home. It helps them assess current skills and identify potential employment barriers; teaches them how to prepare effective written materials to support the job search and how to interview successfully; and…

Large area, low cost solar cell development and production readiness

NASA Technical Reports Server (NTRS)

Michaels, D.

1982-01-01

A process sequence for a large area ( or = 25 sq. cm) silicon solar cell was investigated. Generic cell choice was guided by the expected electron fluence, by the packing factors of various cell envelope designs onto each panel to provide needed voltage as well as current, by the weight constraints on the system, and by the cost goals of the contract.

Context Matters: The Value of Analyzing Human Factors within Educational Contexts as a Way of Informing Technology-Related Decisions within Design Research

ERIC Educational Resources Information Center

MacKinnon, Kim

2012-01-01

While design research can be useful for designing effective technology integrations within complex social settings, it currently fails to provide concrete methodological guidelines for gathering and organizing information about the research context, or for determining how such analyses ought to guide the iterative design and innovation process. A…

Constraints and benefits of changing the distribution process for recreation special use permits in the U.S

Treesearch

Jessie Meybin; Robert Burns; Alan Graefe; James D. Absher

2010-01-01

A significant policy change governing recreation Special Use Permits on U.S. Federal lands was implemented in October 2008. The changes may have a major impact on current and potential recreation users, members of local communities, and existing outfitter/guide services. This paper presents findings from interviews with permit distribution supervisors about changes in...

ROMI 4.0: Rough mill simulator 4.0 users manual

Treesearch

R. Edward Thomas; Timo Grueneberg; Urs Buehlmann

2015-01-01

The Rough MIll simulator (ROMI Version 4.0) is a computer software package for personal computers (PCs) that simulates current industrial practices for rip-first, chop-first, and rip and chop-first lumber processing. This guide shows how to set up the software; design, implement, and execute simulations; and examine the results. ROMI 4.0 accepts cutting bills with as...

Guide for curing of Portland cement concrete pavements : volume II.

DOT National Transportation Integrated Search

2006-08-01

Information on the current state of knowledge of curing hydraulic-cement concrete and on current curing practice : was gathered by means of a literature review and a review of current standard guidance. From this information, a : draft guide for curi...

Speech perception as an active cognitive process

PubMed Central

Heald, Shannon L. M.; Nusbaum, Howard C.

2014-01-01

One view of speech perception is that acoustic signals are transformed into representations for pattern matching to determine linguistic structure. This process can be taken as a statistical pattern-matching problem, assuming realtively stable linguistic categories are characterized by neural representations related to auditory properties of speech that can be compared to speech input. This kind of pattern matching can be termed a passive process which implies rigidity of processing with few demands on cognitive processing. An alternative view is that speech recognition, even in early stages, is an active process in which speech analysis is attentionally guided. Note that this does not mean consciously guided but that information-contingent changes in early auditory encoding can occur as a function of context and experience. Active processing assumes that attention, plasticity, and listening goals are important in considering how listeners cope with adverse circumstances that impair hearing by masking noise in the environment or hearing loss. Although theories of speech perception have begun to incorporate some active processing, they seldom treat early speech encoding as plastic and attentionally guided. Recent research has suggested that speech perception is the product of both feedforward and feedback interactions between a number of brain regions that include descending projections perhaps as far downstream as the cochlea. It is important to understand how the ambiguity of the speech signal and constraints of context dynamically determine cognitive resources recruited during perception including focused attention, learning, and working memory. Theories of speech perception need to go beyond the current corticocentric approach in order to account for the intrinsic dynamics of the auditory encoding of speech. In doing so, this may provide new insights into ways in which hearing disorders and loss may be treated either through augementation or therapy. PMID:24672438

Modeling the process of interaction of 10 keV electrons with a plane dielectric surface

NASA Astrophysics Data System (ADS)

Vokhmyanina, Kristina; Sotnikova, Valentina; Sotnikov, Alexey; Kaplii, Anna; Nikulicheva, Tatyana; Kubankin, Alexandr; Kishin, Ivan

2018-05-01

The effect of guiding of charged particles by dielectric channels is of noticeable interest at the present time. The phenomenon is widely studied experimentally and theoretically but some points still need to be clarified. A previously developed model of interaction of fast electrons with dielectric surface at grazing incidence is used to study the independence of electron deflection on the value of electron beam current. The calculations were performed assuming a smooth dependence of the surface conductivity on the beam current in the 40-3000 nA range.

Benchmark matrix and guide: Part III.

PubMed

1992-01-01

The final article in the "Benchmark Matrix and Guide" series developed by Headquarters Air Force Logistics Command completes the discussion of the last three categories that are essential ingredients of a successful total quality management (TQM) program. Detailed behavioral objectives are listed in the areas of recognition, process improvement, and customer focus. These vertical categories are meant to be applied to the levels of the matrix that define the progressive stages of the TQM: business as usual, initiation, implementation, expansion, and integration. By charting the horizontal progress level and the vertical TQM category, the quality management professional can evaluate the current state of TQM in any given organization. As each category is completed, new goals can be defined in order to advance to a higher level. The benchmarking process is integral to quality improvement efforts because it focuses on the highest possible standards to evaluate quality programs.

Concurrent Image Processing Executive (CIPE). Volume 2: Programmer's guide

NASA Technical Reports Server (NTRS)

Williams, Winifred I.

1990-01-01

This manual is intended as a guide for application programmers using the Concurrent Image Processing Executive (CIPE). CIPE is intended to become the support system software for a prototype high performance science analysis workstation. In its current configuration CIPE utilizes a JPL/Caltech Mark 3fp Hypercube with a Sun-4 host. CIPE's design is capable of incorporating other concurrent architectures as well. CIPE provides a programming environment to applications' programmers to shield them from various user interfaces, file transactions, and architectural complexities. A programmer may choose to write applications to use only the Sun-4 or to use the Sun-4 with the hypercube. A hypercube program will use the hypercube's data processors and optionally the Weitek floating point accelerators. The CIPE programming environment provides a simple set of subroutines to activate user interface functions, specify data distributions, activate hypercube resident applications, and to communicate parameters to and from the hypercube.

A methodology aimed at fostering and sustaining the development processes of an IE-based industry

NASA Astrophysics Data System (ADS)

Corallo, Angelo; Errico, Fabrizio; de Maggio, Marco; Giangreco, Enza

In the current competitive scenario, where business relationships are fundamental in building successful business models and inter/intra organizational business processes are progressively digitalized, an end-to-end methodology is required that is capable of guiding business networks through the Internetworked Enterprise (IE) paradigm: a new and innovative organizational model able to leverage Internet technologies to perform real-time coordination of intra and inter-firm activities, to create value by offering innovative and personalized products/services and reduce transaction costs. This chapter presents the TEKNE project Methodology of change that guides business networks, by means of a modular and flexible approach, towards the IE techno-organizational paradigm, taking into account the competitive environment of the network and how this environment influences its strategic, organizational and technological levels. Contingency, the business model, enterprise architecture and performance metrics are the key concepts that form the cornerstone of this methodological framework.

Research Performed within the Non-Destructive Evaluation Team at NASA Glenn Research Center

NASA Technical Reports Server (NTRS)

Burns, Erin A.

2004-01-01

Non-destructive testing is essential in many fields of manufacturing and research in order to perform reliable examination of potentially damaged materials and parts without destroying the inherent structure of the materials. Thus, the Non-Destructive Evaluation (NDE) Team at NASA Glenn Research Center partakes in various projects to improve materials testing equipment as well as analyze materials, material defects, and material deficiencies. Due to the array of projects within the NDE Team at this time, five research aims were supplemental to some current projects. A literature survey of "DE and testing methodologies as related to rocks was performed. Also, Mars Expedition Rover technology was assessed to understand the requirements for instrumentation in harsh space environments (e.g. temperature). Potential instrumentation and technologies were also considered and documented. The literature survey provided background and potential sources for a proposal to acquire funding for ultrasonic instrumentation on board a future Mars expedition. The laboratory uses a Santec Systems AcousticScope AS200 acoustography system. Labview code was written within the current program in order to improve the current performance of the acoustography system. A sample of Reinforced Carbon/Carbon (RCC) material from the leading edge of the space shuttle underwent various non-destructive tests (guided wave scanning, thermography, computed tomography, real time x-ray, etc.) in order to characterize its structure and examine possible defects. Guided wave scan data of a ceramic matrix composite (CMC) panel was reanalyzed utilizing image correlations and signal processing variables. Additional guided wave scans and thermography were also performed on the CMC panel. These reevaluated data and images will be used in future presentations and publications. An additional axis for the guided wave scanner was designed, constructed, and implemented. This additional axis allowed incremental spacing of the previously fixed transducers for ultrasonic velocity measurements.

Computerized procedures system

DOEpatents

Lipner, Melvin H.; Mundy, Roger A.; Franusich, Michael D.

2010-10-12

An online data driven computerized procedures system that guides an operator through a complex process facility's operating procedures. The system monitors plant data, processes the data and then, based upon this processing, presents the status of the current procedure step and/or substep to the operator. The system supports multiple users and a single procedure definition supports several interface formats that can be tailored to the individual user. Layered security controls access privileges and revisions are version controlled. The procedures run on a server that is platform independent of the user workstations that the server interfaces with and the user interface supports diverse procedural views.

Optimizing MR imaging-guided navigation for focused ultrasound interventions in the brain

NASA Astrophysics Data System (ADS)

Werner, B.; Martin, E.; Bauer, R.; O'Gorman, R.

2017-03-01

MR imaging during transcranial MR imaging-guided Focused Ultrasound surgery (tcMRIgFUS) is challenging due to the complex ultrasound transducer setup and the water bolus used for acoustic coupling. Achievable image quality in the tcMRIgFUS setup using the standard body coil is significantly inferior to current neuroradiologic standards. As a consequence, MR image guidance for precise navigation in functional neurosurgical interventions using tcMRIgFUS is basically limited to the acquisition of MR coordinates of salient landmarks such as the anterior and posterior commissure for aligning a stereotactic atlas. Here, we show how improved MR image quality provided by a custom built MR coil and optimized MR imaging sequences can support imaging-guided navigation for functional tcMRIgFUS neurosurgery by visualizing anatomical landmarks that can be integrated into the navigation process to accommodate for patient specific anatomy.

Theoretical foundations guiding culture change: The work of the Partnerships in Dementia Care Alliance

PubMed Central

Dupuis, Sherry; McAiney, Carrie A; Ploeg, Jenny; de Witt, Lorna

2016-01-01

Longstanding concerns about quality care provision, specifically in the area of long-term care, have prompted calls for changing the culture of care to reflect more client-driven and relationship-centred models. Despite an increase in culture change initiatives in both Canada and the United States, there is insufficient information about the theories and approaches that guide culture change. The purpose of this paper is to describe a culture change initiative currently underway in Canada, the Partnerships in Dementia Care Alliance, and the theoretical foundations informing our work. More specifically, we describe how the theoretical and philosophical underpinnings of the Alzheimer Disease and Related Dementias framework, the authentic partnership approach, participatory action research and Appreciative Inquiry have been integrated to guide a culture change process that encourages working collaboratively, thinking and doing differently and re-imagining new possibilities for changing the culture of dementia care. PMID:24419355

Theoretical foundations guiding culture change: The work of the Partnerships in Dementia Care Alliance.

PubMed

Dupuis, Sherry; McAiney, Carrie A; Fortune, Darla; Ploeg, Jenny; Witt, Lorna de

2016-01-01

Longstanding concerns about quality care provision, specifically in the area of long-term care, have prompted calls for changing the culture of care to reflect more client-driven and relationship-centred models. Despite an increase in culture change initiatives in both Canada and the United States, there is insufficient information about the theories and approaches that guide culture change. The purpose of this paper is to describe a culture change initiative currently underway in Canada, the Partnerships in Dementia Care Alliance, and the theoretical foundations informing our work. More specifically, we describe how the theoretical and philosophical underpinnings of the Alzheimer Disease and Related Dementias framework, the authentic partnership approach, participatory action research and Appreciative Inquiry have been integrated to guide a culture change process that encourages working collaboratively, thinking and doing differently and re-imagining new possibilities for changing the culture of dementia care. © The Author(s) 2014.

Near infrared fluorescence for image-guided surgery

PubMed Central

2012-01-01

Near infrared (NIR) image-guided surgery holds great promise for improved surgical outcomes. A number of NIR image-guided surgical systems are currently in preclinical and clinical development with a few approved for limited clinical use. In order to wield the full power of NIR image-guided surgery, clinically available tissue and disease specific NIR fluorophores with high signal to background ratio are necessary. In the current review, the status of NIR image-guided surgery is discussed along with the desired chemical and biological properties of NIR fluorophores. Lastly, tissue and disease targeting strategies for NIR fluorophores are reviewed. PMID:23256079

Sensor Characteristics Reference Guide

DOE Office of Scientific and Technical Information (OSTI.GOV)

Cree, Johnathan V.; Dansu, A.; Fuhr, P.

The Buildings Technologies Office (BTO), within the U.S. Department of Energy (DOE), Office of Energy Efficiency and Renewable Energy (EERE), is initiating a new program in Sensor and Controls. The vision of this program is: • Buildings operating automatically and continuously at peak energy efficiency over their lifetimes and interoperating effectively with the electric power grid. • Buildings that are self-configuring, self-commissioning, self-learning, self-diagnosing, self-healing, and self-transacting to enable continuous peak performance. • Lower overall building operating costs and higher asset valuation. The overarching goal is to capture 30% energy savings by enhanced management of energy consuming assets and systemsmore » through development of cost-effective sensors and controls. One step in achieving this vision is the publication of this Sensor Characteristics Reference Guide. The purpose of the guide is to inform building owners and operators of the current status, capabilities, and limitations of sensor technologies. It is hoped that this guide will aid in the design and procurement process and result in successful implementation of building sensor and control systems. DOE will also use this guide to identify research priorities, develop future specifications for potential market adoption, and provide market clarity through unbiased information« less

Laboratory Experiment of Magnetic Reconnection between Merging Flux Tubes with Strong Guide FIeld

NASA Astrophysics Data System (ADS)

Inomoto, M.; Kamio, S.; Kuwahata, A.; Ono, Y.

2013-12-01

Magnetic reconnection governs variety of energy release events in the universe, such as solar flares, geomagnetic substorms, and sawtooth crash in laboratory nuclear fusion experiments. Differently from the classical steady reconnection models, non-steady behavior of magnetic reconnection is often observed. In solar flares, intermittent enhancement of HXR emission is observed synchronously with multiple ejection of plammoids [1]. In laboratory reconnection experiments, the existence of the guide field, that is perpendicular to the reconnection field, makes significant changes on reconnection process. Generally the guide field will slow down the reconnection rate due to the increased magnetic pressure inside the current sheet. It also brings about asymmetric structure of the separatrices or effective particle acceleration in collisionless conditions. We have conducted laboratory experiments to study the behavior of the guide-field magnetic reconnection using plasma merging technique (push reconnection). Under substantial guide field even larger than the reconnection field, the reconnection generally exhibits non-steady feature which involves intermittent detachment of X-point and reconnection current center[2]. Transient enhancement of reconnection rate is observed simultaneously with the X-point motion[3]. We found two distinct phenomena associated with the guide-field non-steady reconnection. The one is the temporal and localized He II emission from X-point region, suggesting the production of energetic electrons which could excite the He ions in the vicinity of the X-point. The other is the excitation of large-amplitude electromagnetic waves which have similar properties with kinetic Alfven waves, whose amplitude show positive correlation with the enhancement of the reconnection electric field[4]. Electron beam instability caused by the energetic electrons accelerated to more than twice of the electron thermal velocity could be a potential driver of the monochromatic magnetic fluctuations. In conclusion, the laboratory guide field reconnection experiments showed some unique features such as ejection of current sheet, localized enhancement of emission, and excitation of low frequency waves, suggesting intermittent fast reconnection mechanism with significant electron acceleration. [1] N. Nishizuka et al., Astrophysical J. 711, 1062 (2010). [2] Y. Ono et al., Phys. Plasmas 18, 111213 (2011). [3] M. Inomoto et al., Plasma and Fusion Res. 8, 2401112 (2013). [4] M. Inomoto et al., Phys. Plasmas 20, 061209 (2013).

Practitioner’s Guide to Assessment of Autism Spectrum Disorders in Infants and Toddlers

PubMed Central

Goldsmith, Tina R.; Snow, Anne V.; Chawarska, Katarzyna

2016-01-01

Recent advances in clinical research have made it possible to diagnosis autism spectrum disorders (ASD) as early as the second year of life. The diagnostic process early in development is often complex, and thus, familiarity with the most recent findings in clinical assessment instruments, early symptoms, and developmental trajectories of young children with autism is essential. This paper provides an empirically based practitioner’s guide to issues and concerns related to early diagnosis of ASD in very young children, documentation of the course and patterns of ASD symptomatology in infants and toddlers, and current understanding in the field of diagnostic outcomes of children identified in the first and second year of life. PMID:22057879

Evidence-based practice for pain identification in cognitively impaired nursing home residents.

PubMed

Sacoco, Christina; Ishikawa, Sally

2014-09-01

Pain identification of cognitively impaired elderly is very challenging. This project aimed to identify best practices for pain assessment in nursing home residents with cognitive impairment and to establish a standardized pain assessment guide to optimize nursing practice and resident outcomes. The Iowa Model of Evidence-Based Practice to Promote Quality of Care guided the project's process. Phase I of the project analyzed data gained from chart reviews on current practices of pain assessment, and Phase II used the results of Phase I to develop, implement, and evaluate an evidence-based practice standard for nursing assessment of pain for cognitively impaired residents. Copyright © 2014 Elsevier Inc. All rights reserved.

Optimizing the Orchestration of Resemiotization with Teacher "Talk Moves": A Model of Guided-Inquiry Instruction in Middle School Science

ERIC Educational Resources Information Center

Millstone, Rachel Diana

2010-01-01

The current conceptualization of science set forth by the National Research Council (2008) is one of science as a social activity, rather than a view of science as a fixed body of knowledge. This requires teachers to consider how communication, processing, and meaning-making contribute to science learning. It also requires teachers to think deeply…

Barriers and Facilitators to the Use of High-Technology Augmentative and Alternative Communication Devices: A Systematic Review and Qualitative Synthesis

ERIC Educational Resources Information Center

Baxter, Susan; Enderby, Pam; Evans, Philippa; Judge, Simon

2012-01-01

Background: There has been a rapid growth in recent years of available technologies for individuals with communication difficulties. Research in the area is currently underdeveloped with practitioners having a limited body of work on which to draw to guide the process of intervention. Concerns have been raised that this newly developed technology…

Facilitator's Guide to Staff Training for the Rural America Series. Module VIII: Placement. Research and Development Series No. 149I.

ERIC Educational Resources Information Center

Altschuld, James W.; And Others

The eighth module of the Rural America staff training series is designed to help individuals gain a better understanding of the placement process. The module begins with a brief introduction to placement in terms of definitions and the current status of placement in the participants' schools, addressing questions of who provides leadership for…

Solar Terrestrial programs: A five year plan

NASA Technical Reports Server (NTRS)

Stern, D. P.

1978-01-01

Major projects to be initiated in the 1980-1985 period, designed to study the Sun, the heliosphere, Earth's magnetosphere, and the upper atmosphere involve the use of spacelab as well as free flying spacecraft. Current and recent investigations in these areas are reviewed and the guiding principles followed in planning future missions are examined. The implementation strategy, the planning process, and supporting research and technology are discussed.

Safety Assurance Factors for Electronic Health Record Resilience (SAFER): study protocol

PubMed Central

2013-01-01

Background Implementation and use of electronic health records (EHRs) could lead to potential improvements in quality of care. However, the use of EHRs also introduces unique and often unexpected patient safety risks. Proactive assessment of risks and vulnerabilities can help address potential EHR-related safety hazards before harm occurs; however, current risk assessment methods are underdeveloped. The overall objective of this project is to develop and validate proactive assessment tools to ensure that EHR-enabled clinical work systems are safe and effective. Methods/Design This work is conceptually grounded in an 8-dimension model of safe and effective health information technology use. Our first aim is to develop self-assessment guides that can be used by health care institutions to evaluate certain high-risk components of their EHR-enabled clinical work systems. We will solicit input from subject matter experts and relevant stakeholders to develop guides focused on 9 specific risk areas and will subsequently pilot test the guides with individuals representative of likely users. The second aim will be to examine the utility of the self-assessment guides by beta testing the guides at selected facilities and conducting on-site evaluations. Our multidisciplinary team will use a variety of methods to assess the content validity and perceived usefulness of the guides, including interviews, naturalistic observations, and document analysis. The anticipated output of this work will be a series of self-administered EHR safety assessment guides with clear, actionable, checklist-type items. Discussion Proactive assessment of patient safety risks increases the resiliency of health care organizations to unanticipated hazards of EHR use. The resulting products and lessons learned from the development of the assessment guides are expected to be helpful to organizations that are beginning the EHR selection and implementation process as well as those that have already implemented EHRs. Findings from our project, currently underway, will inform future efforts to validate and implement tools that can be used by health care organizations to improve the safety of EHR-enabled clinical work systems. PMID:23587208

Modeling Bloch oscillations in ultra-small Josephson junctions

NASA Astrophysics Data System (ADS)

Vora, Heli; Kautz, Richard; Nam, Sae Woo; Aumentado, Jose

In a seminal paper, Likharev et al. developed a theory for ultra-small Josephson junctions with Josephson coupling energy (Ej) less than the charging energy (Ec) and showed that such junctions demonstrate Bloch oscillations which could be used to make a fundamental current standard that is a dual of the Josephson volt standard. Here, based on the model of Geigenmüller and Schön, we numerically calculate the current-voltage relationship of such an ultra-small junction which includes various error processes present in a nanoscale Josephson junction such as random quasiparticle tunneling events and Zener tunneling between bands. This model allows us to explore the parameter space to see the effect of each process on the width and height of the Bloch step and serves as a guide to determine whether it is possible to build a quantum current standard of a metrological precision using Bloch oscillations.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

The Drawdown and Distribution Management Manual (DDMM) provides a comprehensive guide to the planning, preparation, and operational processes associated with an SPR system response to an energy emergency. Although parts of the process may be unique to a particular situation, the manual describes the end-to-end continuity of the response by including those activities that would be common to most situations. This manual follows DOE policy contained in DOE Office of Energy Emergencies (OEE) documents that define comprehensive DOE energy emergency response procedures, currently known as the Energy Emergency Response Management System (EERMS). 6 refs.

Guide to Purchasing Green Power

EPA Pesticide Factsheets

The Guide for Purchasing Green Power is a comprehensive guide for current and potential buyers of green power with information about green power purchasing. The Guide is created cooperatively between the EPA, the U.S. Department of Energy, the World Resou

The development of a model of culturally responsive science and mathematics teaching

NASA Astrophysics Data System (ADS)

Hernandez, Cecilia M.; Morales, Amanda R.; Shroyer, M. Gail

2013-12-01

This qualitative theoretical study was conducted in response to the current need for an inclusive and comprehensive model to guide the preparation and assessment of teacher candidates for culturally responsive teaching. The process of developing a model of culturally responsive teaching involved three steps: a comprehensive review of the literature; a synthesis of the literature into thematic categories to capture the dispositions and behaviors of culturally responsive teaching; and the piloting of these thematic categories with teacher candidates to validate the usefulness of the categories and to generate specific exemplars of behavior to represent each category. The model of culturally responsive teaching contains five thematic categories: (1) content integration, (2) facilitating knowledge construction, (3) prejudice reduction, (4) social justice, and (5) academic development. The current model is a promising tool for comprehensively defining culturally responsive teaching in the context of teacher education as well as to guide curriculum and assessment changes aimed to increase candidates' culturally responsive knowledge and skills in science and mathematics teaching.

CRIMALDDI: a co-ordinated, rational, and integrated effort to set logical priorities in anti-malarial drug discovery initiatives

PubMed Central

2010-01-01

Despite increasing efforts and support for anti-malarial drug R&D, globally anti-malarial drug discovery and development remains largely uncoordinated and fragmented. The current window of opportunity for large scale funding of R&D into malaria is likely to narrow in the coming decade due to a contraction in available resources caused by the current economic difficulties and new priorities (e.g. climate change). It is, therefore, essential that stakeholders are given well-articulated action plans and priorities to guide judgments on where resources can be best targeted. The CRIMALDDI Consortium (a European Union funded initiative) has been set up to develop, through a process of stakeholder and expert consultations, such priorities and recommendations to address them. It is hoped that the recommendations will help to guide the priorities of the European anti-malarial research as well as the wider global discovery agenda in the coming decade. PMID:20626844

Using a Guided Journal Club as a Teaching Strategy to Enhance Learning Skills for Evidence-Based Practice.

PubMed

Szucs, Kimberly A; Benson, Jeryl D; Haneman, Brianne

2017-04-01

Journal clubs are used in both clinical and academic settings in order for clinicians and students to utilize current best-practices, become competent in evidence based practice and develop critical appraisal skills. Journal clubs encourage students to practice searching for relevant research, critically appraising articles, and contributing to open discussions with peers. Establishing the practice of reading and critiquing literature in the classroom can enable the creation of a habit of using current evidence when students enter practice. This article describes a strategy for delivering a structured academic journal club to support the learning of evidence based practice skills and students' perception of the journal club, including their overall satisfaction, knowledge base skills, and presentation skills. Students had an overall positive experience and perception of the guided journal club activity. From the instructor's perspective, this assignment was an excellent opportunity to engage students in learning the process of evidence based practice.

DISSECT: a new mnemonic-based approach to the categorization of aortic dissection.

PubMed

Dake, M D; Thompson, M; van Sambeek, M; Vermassen, F; Morales, J P

2013-08-01

Classification systems for aortic dissection provide important guides to clinical decision-making, but the relevance of traditional categorization schemes is being questioned in an era when endovascular techniques are assuming a growing role in the management of this frequently complex and catastrophic entity. In recognition of the expanding range of interventional therapies now used as alternatives to conventional treatment approaches, the Working Group on Aortic Diseases of the DEFINE Project developed a categorization system that features the specific anatomic and clinical manifestations of the disease process that are most relevant to contemporary decision-making. The DISSECT classification system is a mnemonic-based approach to the evaluation of aortic dissection. It guides clinicians through an assessment of six critical characteristics that facilitate optimal communication of the most salient details that currently influence the selection of a therapeutic option, including those findings that are key when considering an endovascular procedure, but are not taken into account by the DeBakey or Stanford categorization schemes. The six features of aortic dissection include: duration of disease; intimal tear location; size of the dissected aorta; segmental extent of aortic involvement; clinical complications of the dissection, and thrombus within the aortic false lumen. In current clinical practice, endovascular therapy is increasingly considered as an alternative to medical management or open surgical repair in select cases of type B aortic dissection. Currently, endovascular aortic repair is not used for patients with type A aortic dissection, but catheter-based techniques directed at peripheral branch vessel ischemia that may complicate type A dissection are considered valuable adjunctive interventions, when indicated. The use of a new system for categorization of aortic dissection, DISSECT, addresses the shortcomings of well-known established schemes devised more than 40 years ago, before the introduction of endovascular techniques. It will serve as a guide to support a critical analysis of contemporary therapeutic options and inform management decisions based on specific features of the disease process. Copyright © 2013 European Society for Vascular Surgery. All rights reserved.

Rationale and design of the IMPACT EU-trial: improve management of heart failure with procalcitonin biomarkers in cardiology (BIC)-18.

PubMed

Möckel, Martin; Slagman, Anna; Vollert, Jörn Ole; Ebmeyer, Stefan; Wiemer, Jan C; Searle, Julia; Giannitsis, Evangelos; Kellum, John A; Maisel, Alan

2018-02-01

To evaluate the effectiveness of procalcitonin (PCT)-guided antibiotic treatment compared to current treatment practice to reduce 90-day all-cause mortality in emergency patients with shortness of breath (SOB) and suspected acute heart failure (AHF). Concomitant AHF and lower respiratory tract (or other bacterial) infection in emergency patients with dyspnea are common and can be difficult to diagnose. Early and adequate initiation of antibiotic therapy (ABX) significantly improves patient outcome, but superfluous prescription of ABX maybe harmful. In a multicentre, prospective, randomized, controlled process trial with an open intervention, adult emergency patients with SOB and increased levels of natriuretic peptides will be randomized to either a standard care group or a PCT-guided group with respect to the initiation of antibiotic treatment. In the PCT-guided group, the initiation of antibiotic therapy is based on the results of acute PCT measurements at admission, using a cut-off of 0.2 ng/ml. A two-stage sample-size adaptive design is used; an interim analysis was done after completion of 50% of patients and the final sample size remained unchanged. Primary endpoint is 90-day all-cause mortality. The current study will provide evidence, whether the routine use of PCT in patients with suspected AHF improves outcome.

Orthogonal ion injection apparatus and process

DOEpatents

Kurulugama, Ruwan T; Belov, Mikhail E

2014-04-15

An orthogonal ion injection apparatus and process are described in which ions are directly injected into an ion guide orthogonal to the ion guide axis through an inlet opening located on a side of the ion guide. The end of the heated capillary is placed inside the ion guide such that the ions are directly injected into DC and RF fields inside the ion guide, which efficiently confines ions inside the ion guide. Liquid droplets created by the ionization source that are carried through the capillary into the ion guide are removed from the ion guide by a strong directional gas flow through an inlet opening on the opposite side of the ion guide. Strong DC and RF fields divert ions into the ion guide. In-guide orthogonal injection yields a noise level that is a factor of 1.5 to 2 lower than conventional inline injection known in the art. Signal intensities for low m/z ions are greater compared to convention inline injection under the same processing conditions.

Developing Qualified Logistics Readiness Officers (LROs) Within Air Combat Command (ACC): A Delphi Study

DTIC Science & Technology

2009-06-01

today face ( Lovewell , 2007). Although the model equips LROs with the understanding of most basic logistics processes, it falls short to deliver a...areas to the degree the operations tempo requires ( Lovewell , 2007). Due to recent changes in mission requirements and organizational re-structuring...the current CFETP appears to be outdated ( Lovewell , 2007). 6 Base-Level Training Guiding the officer to fulfill their training

Isohaline position as a habitat indicator for estuarine populations

USGS Publications Warehouse

Jassby, Alan D.; Kimmerer, W.J.; Monismith, Stephen G.; Armor, C.; Cloern, James E.; Powell, T.M.; Vedlinski, Timothy J.

1995-01-01

The striped bass survival data were also used to illustrate a related important point: incorporating additionalexplanatory variables may decrease the prediction error for a population or process, but it can increase theuncertainty in parameter estimates and management strategies based on these estimates. Even in cases wherethe uncertainty is currently too large to guide management decisions, an uncertainty analysis can identify themost practical direction for future data acquisition.

Palliative care nursing involvement in end-of-life decision-making: Qualitative secondary analysis.

PubMed

Hernández-Marrero, Pablo; Fradique, Emília; Pereira, Sandra Martins

2018-01-01

Nurses are the largest professional group in healthcare and those who make more decisions. In 2014, the Committee on Bioethics of the Council of Europe launched the "Guide on the decision-making process regarding medical treatment in end-of-life situations" (hereinafter, Guide), aiming at improving decision-making processes and empowering professionals in making end-of-life decisions. The Guide does not mention nurses explicitly. To analyze the ethical principles most valued by nurses working in palliative care when making end-of-life decisions and investigate if they are consistent with the framework and recommendations of the Guide; to identify what disputed/controversial issues are more frequent in these nurses' current end-of-life care practices. Qualitative secondary analysis. Participants/context: Three qualitative datasets including 32 interviews from previous studies with nurses working in palliative care in Portugal. Ethical consideration: Ethical approval was obtained from the Ethics Research Lab of the Instituto de Bioética (Ethics Research Lab of the Institute of Bioethics) (Ref.04.2015). Ethical procedures are thoroughly described. All participant nurses referred to autonomy as an ethical principle paramount in end-of-life decision-making. They were commonly involved in end-of-life decision-making. Palliative sedation and communication were the most mentioned disputed/controversial issues. Autonomy was highly valued in end-of-life care and decision-making. Nurses expressed major concerns in assessing patients' preferences, wishes, and promoting advance care planning. Nurses working in palliative care in Portugal were highly involved in end-of-life decision-making. These processes embraced a collective, inclusive approach. Palliative sedation was the most mentioned disputed issue, which is aligned with previous findings. Communication also emerged as a sensitive ethical issue; it is surprising, however, that only three nurses referred to it. While the Guide does not explicitly mention nurses in its content, this study shows that nurses working in palliative care in Portugal are involved in these processes. Further research is needed on nurses' involvement and practices in end-of-life decision-making.

Current practice and perspectives in CRO oversight based on a survey performed among members of the German Association of Research-Based Pharmaceutical Companies (vfa)

PubMed Central

Hennig, Michael; Hundt, Ferdinand; Busta, Susanne; Mikus, Stefan; Sanden, Per-Holger; Sörgel, Andrea; Ruppert, Thorsten

2017-01-01

In recent years, the number and scope of outsourced activities in the pharmaceutical industry have increased heavily. In addition, also the type of outsourcing has changed significantly in that time. This raises the question of whether and how sponsors retain the capability to select and to control the contract research organizations (CROs) involved and what expertise still has to be present in the development department as well as other relevant departments to ensure adequate oversight, also in line with the expectations of regulators and health authorities. In order to answer these questions, a survey was conducted among the German vfa member companies. The survey describes the latest developments and experiences in outsourcing by 18 German vfa member companies. It concentrates on measures how to implement Quality Assurance (QA) when performing outsourced clinical studies. This study shows that the majority of companies apply a full-outsourcing, preferred-provider model of clinical trial services, with the clinical research department playing the major role in this process. A large amount of guiding documents, processes and tools are used to ensure an adequate oversight of the services performed by the CRO(s). Finally the guiding principles for all oversight processes should be transparent communication, a clearly established expectation for quality, a precise definition of accountability and responsibility while avoiding silo mentality, and a comprehensive documentation of the oversight’s evidence. For globally acting and outsourcing sponsors, oversight processes need to be aligned with regards to local and global perspectives. This survey shows that the current implementation of oversight processes in the participating companies covers all relevant areas to ensure highest quality and integrity of the data produced by the outsourced clinical trial. PMID:28163667

Current practice and perspectives in CRO oversight based on a survey performed among members of the German Association of Research-Based Pharmaceutical Companies (vfa).

PubMed

Hennig, Michael; Hundt, Ferdinand; Busta, Susanne; Mikus, Stefan; Sanden, Per-Holger; Sörgel, Andrea; Ruppert, Thorsten

2017-01-01

In recent years, the number and scope of outsourced activities in the pharmaceutical industry have increased heavily. In addition, also the type of outsourcing has changed significantly in that time. This raises the question of whether and how sponsors retain the capability to select and to control the contract research organizations (CROs) involved and what expertise still has to be present in the development department as well as other relevant departments to ensure adequate oversight, also in line with the expectations of regulators and health authorities. In order to answer these questions, a survey was conducted among the German vfa member companies. The survey describes the latest developments and experiences in outsourcing by 18 German vfa member companies. It concentrates on measures how to implement Quality Assurance (QA) when performing outsourced clinical studies. This study shows that the majority of companies apply a full-outsourcing, preferred-provider model of clinical trial services, with the clinical research department playing the major role in this process. A large amount of guiding documents, processes and tools are used to ensure an adequate oversight of the services performed by the CRO(s). Finally the guiding principles for all oversight processes should be transparent communication, a clearly established expectation for quality, a precise definition of accountability and responsibility while avoiding silo mentality, and a comprehensive documentation of the oversight's evidence. For globally acting and outsourcing sponsors, oversight processes need to be aligned with regards to local and global perspectives. This survey shows that the current implementation of oversight processes in the participating companies covers all relevant areas to ensure highest quality and integrity of the data produced by the outsourced clinical trial.

Manufacture of ultra high precision aerostatic bearings based on glass guide

NASA Astrophysics Data System (ADS)

Guo, Meng; Dai, Yifan; Peng, Xiaoqiang; Tie, Guipeng; Lai, Tao

2017-10-01

The aerostatic guide in the traditional three-coordinate measuring machine and profilometer generally use metal or ceramics material. Limited by the guide processing precision, the measurement accuracy of these traditional instruments is around micro-meter level. By selection of optical materials as guide material, optical processing method and laser interference measurement can be introduced to the traditional aerostatic bearings manufacturing field. By using the large aperture wave-front interference measuring equipment , the shape and position error of the glass guide can be obtained in high accuracy and then it can be processed to 0.1μm or even better with the aid of Magnetorheological Finishing(MRF) and Computer Controlled Optical Surfacing (CCOS) process and other modern optical processing method, so the accuracy of aerostatic bearings can be fundamentally improved and ultra high precision coordinate measuring can be achieved. This paper introduces the fabrication and measurement process of the glass guide by K9 with 300mm measuring range, and its working surface accuracy is up to 0.1μm PV, the verticality and parallelism error between the two guide rail face is better than 2μm, and the straightness of the aerostatic bearings by this K9 glass guide is up to 40nm after error compensation.

Effective connectivity in the neural network underlying coarse-to-fine categorization of visual scenes. A dynamic causal modeling study.

PubMed

Kauffmann, Louise; Chauvin, Alan; Pichat, Cédric; Peyrin, Carole

2015-10-01

According to current models of visual perception scenes are processed in terms of spatial frequencies following a predominantly coarse-to-fine processing sequence. Low spatial frequencies (LSF) reach high-order areas rapidly in order to activate plausible interpretations of the visual input. This triggers top-down facilitation that guides subsequent processing of high spatial frequencies (HSF) in lower-level areas such as the inferotemporal and occipital cortices. However, dynamic interactions underlying top-down influences on the occipital cortex have never been systematically investigated. The present fMRI study aimed to further explore the neural bases and effective connectivity underlying coarse-to-fine processing of scenes, particularly the role of the occipital cortex. We used sequences of six filtered scenes as stimuli depicting coarse-to-fine or fine-to-coarse processing of scenes. Participants performed a categorization task on these stimuli (indoor vs. outdoor). Firstly, we showed that coarse-to-fine (compared to fine-to-coarse) sequences elicited stronger activation in the inferior frontal gyrus (in the orbitofrontal cortex), the inferotemporal cortex (in the fusiform and parahippocampal gyri), and the occipital cortex (in the cuneus). Dynamic causal modeling (DCM) was then used to infer effective connectivity between these regions. DCM results revealed that coarse-to-fine processing resulted in increased connectivity from the occipital cortex to the inferior frontal gyrus and from the inferior frontal gyrus to the inferotemporal cortex. Critically, we also observed an increase in connectivity strength from the inferior frontal gyrus to the occipital cortex, suggesting that top-down influences from frontal areas may guide processing of incoming signals. The present results support current models of visual perception and refine them by emphasizing the role of the occipital cortex as a cortical site for feedback projections in the neural network underlying coarse-to-fine processing of scenes. Copyright © 2015 Elsevier Inc. All rights reserved.

North Dakota implementation of mechanistic-empirical pavement design guide (MEPDG).

DOT National Transportation Integrated Search

2014-12-01

North Dakota currently designs roads based on the AASHTO Design Guide procedure, which is based on : the empirical findings of the AASHTO Road Test of the late 1950s. However, limitations of the current : empirical approach have prompted AASHTO to mo...

Hydrography for the non-Hydrographer: A Paradigm shift in Data Processing

NASA Astrophysics Data System (ADS)

Malzone, C.; Bruce, S.

2017-12-01

Advancements in technology have led to overall systematic improvements including; hardware design, software architecture, data transmission/ telepresence. Historically, utilization of this technology has required a high knowledge level obtained with many years of experience, training and/or education. High training costs are incurred to achieve and maintain an acceptable level proficiency within an organization. Recently, engineers have developed off-the-shelf software technology called Qimera that has simplified the processing of hydrographic data. The core technology is centered around the isolation of tasks within the work- flow to capitalize on the technological advances in computing technology to automate the mundane error prone tasks to bring more value to the stages in which the human brain brings value. Key design features include: guided workflow, transcription automation, processing state management, real-time QA, dynamic workflow for validation, collaborative cleaning and production line processing. Since, Qimera is designed to guide the user, it allows expedition leaders to focus on science while providing an educational opportunity for students to quickly learn the hydrographic processing workflow including ancillary data analysis, trouble-shooting, calibration and cleaning. This paper provides case studies on how Qimera is currently implemented in scientific expeditions, benefits of implementation and how it is directing the future of on-board research for the non-hydrographer.

Safety assessment guidance in the International Atomic Energy Agency RADWASS Program

DOE Office of Scientific and Technical Information (OSTI.GOV)

Vovk, I.F.; Seitz, R.R.

1995-12-31

The IAEA RADWASS programme is aimed at establishing a coherent and comprehensive set of principles and standards for the safe management of waste and formulating the guidelines necessary for their application. A large portion of this programme has been devoted to safety assessments for various waste management activities. Five Safety Guides are planned to be developed to provide general guidance to enable operators and regulators to develop necessary framework for safety assessment process in accordance with international recommendations. They cover predisposal, near surface disposal, geological disposal, uranium/thorium mining and milling waste, and decommissioning and environmental restoration. The Guide on safetymore » assessment for near surface disposal is at the most advanced stage of preparation. This draft Safety Guide contains guidance on description of the disposal system, development of a conceptual model, identification and description of relevant scenarios and pathways, consequence analysis, presentation of results and confidence building. The set of RADWASS publications is currently undergoing in-depth review to ensure a harmonized approach throughout the Safety Series.« less

Technology transfer. Determining industry needs: A guide for communities

NASA Technical Reports Server (NTRS)

1993-01-01

This Guide was developed in accordance with the Memorandum of Understanding between the NASA George C. Marshall Space Flight Center and the following States: Alabama, Georgia, Louisiana, Mississippi, Tennessee, West Virginia. The economic welfare of individual communities is currently a matter of considerable interest. Concern for the position of US industry in the competitive world marketplace is a matter of growing concern as well. This 'guide' describes a process whereby communities may seize the opportunity to improve their own economic destiny. The method described involves linking the technology needs of existing industries to the technologies which are available from Federal Laboratories. Community technology transfer is an 'action possibility' which allows individual citizen groups to do something tangible to improve the economic climate of the places where they live and work. The George C. Marshall Space Flight Center in Huntsville, Alabama is pledged to promote and encourage such efforts, and stands ready to help communities both large and small in that regard.

Vision-guided gripping of a cylinder

NASA Technical Reports Server (NTRS)

Nicewarner, Keith E.; Kelley, Robert B.

1991-01-01

The motivation for vision-guided servoing is taken from tasks in automated or telerobotic space assembly and construction. Vision-guided servoing requires the ability to perform rapid pose estimates and provide predictive feature tracking. Monocular information from a gripper-mounted camera is used to servo the gripper to grasp a cylinder. The procedure is divided into recognition and servo phases. The recognition stage verifies the presence of a cylinder in the camera field of view. Then an initial pose estimate is computed and uncluttered scan regions are selected. The servo phase processes only the selected scan regions of the image. Given the knowledge, from the recognition phase, that there is a cylinder in the image and knowing the radius of the cylinder, 4 of the 6 pose parameters can be estimated with minimal computation. The relative motion of the cylinder is obtained by using the current pose and prior pose estimates. The motion information is then used to generate a predictive feature-based trajectory for the path of the gripper.

Method of passive ranging from infrared image sequence based on equivalent area

NASA Astrophysics Data System (ADS)

Yang, Weiping; Shen, Zhenkang

2007-11-01

The information of range between missile and targets is important not only to missile controlling component, but also to automatic target recognition, so studying the technique of passive ranging from infrared images has important theoretic and practical meanings. Here we tried to get the range between guided missile and target and help to identify targets or dodge a hit. The issue of distance between missile and target is currently a hot and difficult research content. As all know, infrared imaging detector can not range so that it restricts the functions of the guided information processing system based on infrared images. In order to break through the technical puzzle, we investigated the principle of the infrared imaging, after analysing the imaging geometric relationship between the guided missile and the target, we brought forward the method of passive ranging based on equivalent area and provided mathematical analytic formulas. Validating Experiments demonstrate that the presented method has good effect, the lowest relative error can reach 10% in some circumstances.

How self-determination theory can assist our understanding of the teaching and learning processes in medical education. AMEE guide No. 59.

PubMed

Ten Cate, Th J; Kusurkar, Rashmi A; Williams, Geoffrey C

2011-01-01

Self-determination Theory (SDT), designed by Edward Deci and Richard Ryan, serves among the current major motivational theories in psychology. SDT research has been conducted in many areas, among which are education and health care, but its applications in medical education are rare. The potential of SDT to help understand processes in medical education justifies this Guide. SDT is explained in seven principles, one of which is the distinction of three innate psychological needs of human beings: for competence, for autonomy and for relatedness. Further, SDT elaborates how humans tend to internalise regulation of behaviour that initially has been external, in order to develop autonomous, self-determined behaviour. Implications of SDT for medical education are discussed with reference to preparation and selection, curriculum structure, classroom teaching, assessments and examinations, self-directed learning, clinical teaching, students as teachers and researchers, continuing professional development, faculty development and stress among trainees.

A Guide for Developing Standard Operating Job Procedures for the Screening & Grinding Process Wastewater Treatment Facility. SOJP No. 1.

ERIC Educational Resources Information Center

Deal, Gerald A.; Montgomery, James A.

This guide describes standard operating job procedures for the screening and grinding process of wastewater treatment facilities. The objective of this process is the removal of coarse materials from the raw waste stream for the protection of subsequent equipment and processes. The guide gives step-by-step instructions for safety inspection,…

A Guide for Developing Standard Operating Job Procedures for the Sludge Thickening Process Wastewater Treatment Facility. SOJP No. 9.

ERIC Educational Resources Information Center

Schwing, Carl M.

This guide describes standard operating job procedures for the screening and grinding process of wastewater treatment facilities. The objective of this process is the removal of coarse materials from the raw waste stream for the protection of subsequent equipment and processes. The guide gives step-by-step instructions for safety inspection,…

The effect of environmental factors on the implementation of the Mechanistic-empirical pavement design guide (MEPDG).

DOT National Transportation Integrated Search

2011-07-01

Current pavement design based on the AASHTO Design Guide uses an empirical approach from the results of the AASHO Road Test conducted in 1958. To address some of the limitations of the original design guide, AASHTO developed a new guide: Mechanistic ...

Curriculum Guide for Electronics in Technology Education.

ERIC Educational Resources Information Center

Connecticut Industrial Technology Association.

Consistent with the principles of the Connecticut Common Core of Learning, this competency-based curriculum guide for electronics provides a reference guide for educators to research and prepare for teaching the field of electronics. The guide contains 22 units that cover the following topics: theory of matter; safety; direct current; magnetism;…

The Joint Capabilities Integration and Development System: Its Impact on Air Force Acquisition Thirteen Years Later

DTIC Science & Technology

2016-08-01

area denial environments . Near peer adversaries continue to develop low observable aircraft , proliferate counter-precision guided munition systems ...when the Air Force had significantly more control over its requirements validation and acquisition processes. The only tactical aircraft currently in... systems such as the F-35A. Interestingly, upgrades to these previously fielded aircraft also take longer after JCIDS was implemented than it did to

Guide for Transitioning Army Missile Systems From Development to Production.

DTIC Science & Technology

1981-07-01

cost reduction ideas. 3 e! M. atumtion0 !eM . One missile system currently In fall *"I* develoluft, MM9 bee foregone the traditional engineering... costs , delivery schedules and deployment dates. Because of these difficulties and a desire to improve the weapon systems acquisition process, the...tered during the transition of new missile systems into production include: 1. High production unit costs - Occasionally the number of systems to be

Pre-Separation Guide

DTIC Science & Technology

1992-03-04

lose control of the process and lose your current and emerging occupational areas focus. It is your transition; no one can do it that are attractive...tapes, classes on many must meet all the franchisor qualifications to subjects of interest are co-sponsored by this be eligible for the program. To take...your budget is under control there When shopping for life insurance, the are several other items you may want to program you choose should pay funeral

Improving Command and Control in the Mexican Army and Air Force to Support Land Operations

DTIC Science & Technology

2017-06-09

of operations is supported by a robust structure of personnel and equipment ready to deploy anywhere in the world. Marine elements are properly...would grow based on the achieved results and availability of economic resources. The organizational solution described the possible organization of...current capabilities based on the available options in the U.S Doctrine. The analysis process of the study is guided by the Capability Based

A Practical Guide to the Open Standards for Unattended Sensors (OSUS)

DTIC Science & Technology

2018-01-01

collection of information if it does not display a currently valid OMB control number. PLEASE DO NOT RETURN YOUR FORM TO THE ABOVE ADDRESS. 1. REPORT DATE...in OSUS development and some of the benefits of implementing an OSUS controller as the central processing platform in a smart sensing device. The... controller 16. SECURITY CLASSIFICATION OF: 17. LIMITATION OF ABSTRACT UU 18. NUMBER OF PAGES 91 19a. NAME OF

Requirements of a new communication technology for handover and the escalation of patient care: a multi-stakeholder analysis.

PubMed

Johnston, Maximilian J; King, Dominic; Arora, Sonal; Cooper, Kerri; Panda, Neha Aparajita; Gosling, Rebecca; Singh, Kaushiki; Sanders, Bradley; Cox, Benita; Darzi, Ara

2014-08-01

In order to enable safe and efficient information transfer between health care professionals during clinical handover and escalation of care, existing communication technologies must be updated. This study aimed to provide a user-informed guide for the development of an application-based communication system (ABCS), tailored for use in patient handover and escalation of care. Current methods of inter-professional communication in health care along with information system needs for communication technology were identified through literature review. A focus group study was then conducted according to a topic guide developed by health innovation and safety researchers. Fifteen doctors and 11 nurses from three London hospitals participated in a mixture of homogeneous and heterogeneous sessions. The sessions were recorded and transcribed verbatim before being subjected to thematic analysis. Seventeen information system needs were identified from the literature review. Participants identified six themes detailing user perceptions of current communication technology, attitudes to smartphone technology and anticipated requirements of an application produced for handover and escalation of care. Participants were in favour of an ABCS over current methods and expressed enthusiasm for a system with integrated patient information and group-messaging functions. Despite concerns regarding confidentiality and information governance a robust guide for development and implementation of an ABCS was produced, taking input from multiple stakeholders into account. Handover and escalation of care are vital processes for patient safety and communication within these must be optimized. An ABCS for health care professionals would be a welcome innovation and may lead to improvements in patient safety. © 2014 John Wiley & Sons, Ltd.

Acoustic guided waves in cylindrical solid-fluid structures: Modeling with a sweeping frequency finite element method and experimental validation

NASA Astrophysics Data System (ADS)

Liu, Yang; D'Angelo, Ralph M.; Sinha, Bikash K.; Zeroug, Smaine

2017-02-01

Modeling and understanding the complex elastic-wave physics prevalent in solid-fluid cylindrically-layered structures is of importance in many NDE fields, and most pertinently in the domain of well integrity evaluation of cased holes in the oil and gas industry. Current sonic measurements provide viable techniques for well integrity evaluation yet their practical effectiveness is hampered by the current lack of knowledge of acoustic wave fields particularly in complicated cased-hole geometry where for instance two or more nested steel strings are present in the borehole. In this article, we propose and implement a Sweeping Frequency Finite Element Method (SFFEM) for acoustic guided waves simulation in complex geometries that include double steel strings cemented to each other and to the formation and where the strings may be non-concentric. Transient dynamic finite element models are constructed with sweeping frequency signals being applied as the excitation sources. The sources and receivers disposition simulate current sonic measurement tools deployed in the oilfield. Synthetic wavetrains are recorded and processed with modified matrix pencil method to isolate both the dispersive and non-dispersive propagating guided wave modes. Scaled experiments of fluid-filled double strings with dimensions mimicking the real ones encountered in the field have also been carried out to generate reference data. A comparison of the experimental and numerical results indicates that the SFFEM is capable of accurately reproducing the rich and intricate higher-order multiple wave fields observed experimentally in the fluid-filled double string geometries.

Biomarker Guided Therapy in Chronic Heart Failure

PubMed Central

Bektas, Sema

2015-01-01

This review article addresses the question of whether biomarker-guided therapy is ready for clinical implementation in chronic heart failure. The most well-known biomarkers in heart failure are natriuretic peptides, namely B-type natriuretic peptide (BNP) and N-terminal pro-BNP. They are well-established in the diagnostic process of acute heart failure and prediction of disease prognosis. They may also be helpful in screening patients at risk of developing heart failure. Although studied by 11 small- to medium-scale trials resulting in several positive meta-analyses, it is less well-established whether natriuretic peptides are also helpful for guiding chronic heart failure therapy. This uncertainty is expressed by differences in European and American guideline recommendations. In addition to reviewing the evidence surrounding the use of natriuretic peptides to guide chronic heart failure therapy, this article gives an overview of the shortcomings of the trials, how the results may be interpreted and the future directions necessary to fill the current gaps in knowledge. Therapy guidance in chronic heart failure using other biomarkers has not been prospectively tested to date. Emerging biomarkers, such as galectin-3 and soluble ST2, might be useful in this regard, as suggested by several post-hoc analyses. PMID:28785440

Business Data Processing: A Teacher's Guide.

ERIC Educational Resources Information Center

Virginia State Dept. of Education, Richmond. Business Education Service.

The curriculum guide, which was prepared to serve as an aid to all teachers of business data processing, gives a complete outline for a high-school level course in both Common Business Oriented Language (COBOL) and Report Program Generator (RPG). Parts one and two of the guide together comprise an introduction to data processing, which deals with…

Secondary School Students: Prevention Resource Guide.

ERIC Educational Resources Information Center

Alcohol, Drug Abuse, and Mental Health Administration (DHHS/PHS), Rockville, MD. Office for Substance Abuse Prevention.

This prevention resource guide (compiled from a variety of publications and data bases and representing the most currently available information) focuses on secondary school students, and is divided into four sections. The first section contains facts from current research about substance abuse prevention for secondary school students. For…

HSM training guide.

DOT National Transportation Integrated Search

2011-09-01

"This guide focuses on identifying HSM training currently available to state and local agencies who are considering implementation of the HSM. The objectives of the training guide are to: : Identify key focus groups that can be used as a basis fo...

Transportation infrastructure : highway pavement design guide is outdated

DOT National Transportation Integrated Search

1997-11-01

The Federal Highway Administration has worked cooperatively with the : American Association of State Highway and Transportation Officials in : developing and updating the pavement design guide. The current guide is : slated to be updated by the year ...

A Guide for applying a revised version of the PARIHS framework for implementation

PubMed Central

2011-01-01

Background Based on a critical synthesis of literature on use of the Promoting Action on Research Implementation in Health Services (PARIHS) framework, revisions and a companion Guide were developed by a group of researchers independent of the original PARIHS team. The purpose of the Guide is to enhance and optimize efforts of researchers using PARIHS in implementation trials and evaluations. Methods Authors used a planned, structured process to organize and synthesize critiques, discussions, and potential recommendations for refinements of the PARIHS framework arising from a systematic review. Using a templated form, each author independently recorded key components for each reviewed paper; that is, study definitions, perceived strengths/limitations of PARIHS, other observations regarding key issues and recommendations regarding needed refinements. After reaching consensus on these key components, the authors summarized the information and developed the Guide. Results A number of revisions, perceived as consistent with the PARIHS framework's general nature and intent, are proposed. The related Guide is composed of a set of reference tools, provided in Additional files. Its core content is built upon the basic elements of PARIHS and current implementation science. Conclusions We invite researchers using PARIHS for targeted evidence-based practice (EBP) implementations with a strong task-orientation to use this Guide as a companion and to apply the revised framework prospectively and comprehensively. Researchers also are encouraged to evaluate its use relative to perceived strengths and issues. Such evaluations and critical reflections regarding PARIHS and our Guide could thereby promote the framework's continued evolution. PMID:21878092

Simulation of the 3-D Evolution of Electron Scale Magnetic Reconnection - Motivated by Laboratory Experiments Predictions for MMS

NASA Astrophysics Data System (ADS)

Buechner, J.; Jain, N.; Sharma, A.

2013-12-01

The four s/c of the Magnetospheric Multiscale (MMS) mission, to be launched in 2014, will use the Earth's magnetosphere as a laboratory to study the microphysics of three fundamental plasma processes. One of them is magnetic reconnection, an essentially multi-scale process. While laboratory experiments and past theoretical investigations have shown that important processes necessary to understand magnetic reconnection take place at electron scales the MMS mission for the first time will be able to resolve these scales by in space observations. For the measurement strategy of MMS it is important to make specific predictions of the behavior of current sheets with a thickness of the order of the electron skin depth which play an important role in the evolution of collisionless magnetic reconnection. Since these processes are highly nonlinear and non-local numerical simulation is needed to specify the current sheet evolution. Here we present new results about the nonlinear evolution of electron-scale current sheets starting from the linear stage and using 3-D electron-magnetohydrodynamic (EMHD) simulations. The growth rates of the simulated instabilities compared well with the growth rates obtained from linear theory. Mechanisms and conditions of the formation of flux ropes and of current filamentation will be discussed in comparison with the results of fully kinetic simulations. In 3D the X- and O-point configurations of the magnetic field formed in reconnection planes alternate along the out-of-reconnection-plane direction with the wavelength of the unstable mode. In the presence of multiple reconnection sites, the out-of-plane magnetic field can develop nested structure of quadrupoles in reconnection planes, similar to the 2-D case, but now with variations in the out-of-plane direction. The structures of the electron flow and magnetic field in 3-D simulations will be compared with those in 2-D simulations to discriminate the essentially 3D features. We also discuss the influence of guide fields, as in the magnetopause case and show how the 3-D evolution of an electron current sheet is influenced the strength of the guide field. This is unlike the 2-D case where reconnection takes place only in a plane. This work was partially funded by the Max-Planck/Princeton Center for Plasma Physics and the National Science Foundation.

Career Preparation in Agricultural Products (Food Processing): A Curriculum Guide for High School Vocational Agriculture. Test Edition.

ERIC Educational Resources Information Center

Moore, Eddie A.

This curriculum guide in agricultural products (food processing) is one of 10 guides developed as part of a vocational project stressing agribusiness, natural resources, and environmental protection. The scope of this guide includes three occupational subgroups: meat, fish, poultry; dairy (milk) products; fruits and vegetables. It is meant as an…

Computer Processing 10-20-30. Business Education Curriculum Guide.

ERIC Educational Resources Information Center

Alberta Dept. of Education, Edmonton. Curriculum Branch.

This curriculum guide is one of nine such guides developed for an Alberta high school business education program. Its content covers the main subject area or strand of computer processing. Subject to the constraints outlined in the guide, the modules are to be formatted into three- or four-credit courses within each strand. Introductory materials…

High-frequency plasma-heating apparatus

DOEpatents

Brambilla, Marco; Lallia, Pascal

1978-01-01

An array of adjacent wave guides feed high-frequency energy into a vacuum chamber in which a toroidal plasma is confined by a magnetic field, the wave guide array being located between two toroidal current windings. Waves are excited in the wave guide at a frequency substantially equal to the lower frequency hybrid wave of the plasma and a substantially equal phase shift is provided from one guide to the next between the waves therein. For plasmas of low peripheral density gradient, the guides are excited in the TE.sub.01 mode and the output electric field is parallel to the direction of the toroidal magnetic field. For exciting waves in plasmas of high peripheral density gradient, the guides are excited in the TM.sub.01 mode and the magnetic field at the wave guide outlets is parallel to the direction of the toroidal magnetic field. The wave excited at the outlet of the wave guide array is a progressive wave propagating in the direction opposite to that of the toroidal current and is, therefore, not absorbed by so-called "runaway" electrons.

Guiding out-migrating juvenile sea lamprey (Petromyzon marinus) with pulsed direct current

USGS Publications Warehouse

Johnson, Nicholas S.; Miehls, Scott M.

2014-01-01

Non-physical stimuli can deter or guide fish without affecting water flow or navigation and therefore have been investigated to improve fish passage at anthropogenic barriers and to control movement of invasive fish. Upstream fish migration can be blocked or guided without physical structure by electrifying the water, but directional downstream fish guidance with electricity has received little attention. We tested two non-uniform pulsed direct current electric systems, each having different electrode orientations (vertical versus horizontal), to determine their ability to guide out-migrating juvenile sea lamprey (Petromyzon marinus) and rainbow trout (Oncorhynchus mykiss). Both systems guided significantly more juvenile sea lamprey to a specific location in our experimental raceway when activated than when deactivated, but guidance efficiency decreased at the highest water velocities tested. At the electric field setting that effectively guided sea lamprey, rainbow trout were guided by the vertical electrode system, but most were blocked by the horizontal electrode system. Additional research should characterize the response of other species to non-uniform fields of pulsed DC and develop electrode configurations that guide fish over a range of water velocity.

Observational Signatures of Magnetic Reconnection

NASA Technical Reports Server (NTRS)

Savage, Sabrina

2014-01-01

Magnetic reconnection is often referred to as the primary source of energy release during solar flares. Directly observing reconnection occurring in the solar atmosphere, however, is not trivial considering that the scale size of the diffusion region is magnitudes smaller than the observational capabilities of current instrumentation, and coronal magnetic field measurements are not currently sufficient to capture the process. Therefore, predicting and studying observationally feasible signatures of the precursors and consequences of reconnection is necessary for guiding and verifying the simulations that dominate our understanding. I will present a set of such observations, particularly in connection with long-duration solar events, and compare them with recent simulations and theoretical predictions.

Using Human Factors Methods to Design a New Interface for an Electronic Medical Record

PubMed Central

Saleem, Jason J.; Patterson, Emily S.; Militello, Laura; Asch, Steven M.; Doebbeling, Bradley N.; Render, Marta L.

2007-01-01

The Veterans Health Administration (VHA) is a leader in development and use of electronic patient records and clinical decision support. The VHA is currently reengineering a somewhat dated platform for its Computerized Patient Record System (CPRS). This process affords a unique opportunity to implement major changes to the current design and function of the system. We report on two human factors studies designed to provide input and guidance during this reengineering process. One study involved a card sort to better understand how providers tend to cognitively organize clinical data, and how that understanding can help guide interface design. The other involved a simulation to assess the impact of redesign modifications on computerized clinical reminders, a form of clinical decision support in the CPRS, on the learnability of the system for first-time users. PMID:18693914

QUAGOL: a guide for qualitative data analysis.

PubMed

Dierckx de Casterlé, Bernadette; Gastmans, Chris; Bryon, Els; Denier, Yvonne

2012-03-01

Data analysis is a complex and contested part of the qualitative research process, which has received limited theoretical attention. Researchers are often in need of useful instructions or guidelines on how to analyze the mass of qualitative data, but face the lack of clear guidance for using particular analytic methods. The aim of this paper is to propose and discuss the Qualitative Analysis Guide of Leuven (QUAGOL), a guide that was developed in order to be able to truly capture the rich insights of qualitative interview data. The article describes six major problems researchers are often struggling with during the process of qualitative data analysis. Consequently, the QUAGOL is proposed as a guide to facilitate the process of analysis. Challenges emerged and lessons learned from own extensive experiences with qualitative data analysis within the Grounded Theory Approach, as well as from those of other researchers (as described in the literature), were discussed and recommendations were presented. Strengths and pitfalls of the proposed method were discussed in detail. The Qualitative Analysis Guide of Leuven (QUAGOL) offers a comprehensive method to guide the process of qualitative data analysis. The process consists of two parts, each consisting of five stages. The method is systematic but not rigid. It is characterized by iterative processes of digging deeper, constantly moving between the various stages of the process. As such, it aims to stimulate the researcher's intuition and creativity as optimal as possible. The QUAGOL guide is a theory and practice-based guide that supports and facilitates the process of analysis of qualitative interview data. Although the method can facilitate the process of analysis, it cannot guarantee automatic quality. The skills of the researcher and the quality of the research team remain the most crucial components of a successful process of analysis. Additionally, the importance of constantly moving between the various stages throughout the research process cannot be overstated. Copyright © 2011 Elsevier Ltd. All rights reserved.

Help Me Please!: Designing and Developing Application for Emergencies

NASA Astrophysics Data System (ADS)

Hong, Ng Ken; Hafit, Hanayanti; Wahid, Norfaradilla; Kasim, Shahreen; Yusof, Munirah Mohd

2017-08-01

Help Me Please! Application is an android platform emergency button application that is designed to transmit emergency messages to target receivers with real time information. The purpose of developing this application is to help people to notify any emergency circumstances via Short Message Service (SMS) in android platform. The application will receive the current location from Global Positioning System (GPS), will obtain the current time from the mobile device and send this information to the receivers when user presses the emergency button. Simultaneously, the application will keep sending the emergency alerts to receivers and will update to database based on the time interval set by user until user stop the function. Object-oriented Software Development model is employed to guide the development of this application with the knowledge of Java language and Android Studio. In conclusion, this application plays an important role in rescuing process when emergency circumstances happen. The rescue process will become more effective by notifying the emergency circumstances and send the current location of user to others in the early hours.

Agile Multi-Function Arrays

DTIC Science & Technology

2007-07-01

been put into place to guide the standards process. 6. If the balloting results in 75% approval then the draft standard is sub- mitted to the IEEE-SA...as functionality and timeliness. Such a design process presumably guided the design for the AMRFC test bed. The multifunction apertures for...Integrated Topside should be guided by the same design process. Engaging in a spiral design process will lead to the most effective selection of research

Self-Study Guide for Florida VPK Provider Improvement Plan Development

ERIC Educational Resources Information Center

Phillips, Beth M.; Mazzeo, Debbie; Smith, Kevin

2016-01-01

This Self-Study Guide has been developed to support Florida Voluntary Prekindergarten Providers (VPK) who are required to complete an improvement plan process (i.e., low-performing providers). The guide has sections that can be used during both the process of selecting target areas for an improvement plan and the process of implementing new or…

A guide for HOT lane development

DOT National Transportation Integrated Search

2002-12-01

This guide is intended to be a comprehensive source of collective experience gained from the nations current and implemented high occupancy toll (HOT) lane projects. The guide presents a wide range of information on HOT lanes and is intended to as...

A guide for statewide impaired-driving task forces.

DOT National Transportation Integrated Search

2009-09-01

The purpose of the guide is to assist State officials and other stakeholders who are interested in establishing an : Impaired-Driving Statewide Task Force or who are exploring ways to improve their current Task Force. The guide : addresses issues suc...

Integrating Operational Energy Implications into System-Level Combat Effects Modeling: Assessing the Combat Effectiveness and Fuel Use of ABCT 2020 and Current ABCT

DTIC Science & Technology

2015-01-01

Endy M. Daehner, John Matsumura, Thomas J. Herbert , Jeremy R. Kurz, Keith Walters Integrating Operational Energy Implications into System-Level... George Guthridge, and Megan Corso for their clear guid- ance and assistance throughout the study. We also received valuable information and insights from...helped with processing modeling and simulation outputs. Laura Novacic and Donna Mead provided invaluable administrative assistance and help with

Experimental Demonstration of Magnetic Reconnection in a Laboratory Scale with Guide Field

NASA Astrophysics Data System (ADS)

Kim, Hyunsue; Egedal, Jan; Olsen, Joe; Endrizzi, Douglass; Wallace, John; TREX Team

2017-10-01

Through a process called magnetic reconnection, the opposing solar wind and Earth magnetic fields annihilate and allow energetic solar particles to enter the magnetosphere. This energetic plasma can cause major disturbances to satellite communication networks and navigation systems, as well as electrical power grids. To better understand this process and prevent significant economic losses, NASA has launched the MMS Mission in 2015, a cluster of spacecraft which directly probes the reconnection sites in the magnetosphere. Though in situ measurements of reconnection in space are essential to our understanding of the process, the mission comes at a cost of over 1 billion. Thus, smaller laboratory experiments become essential to compliment the data acquired by MMS at relatively low cost. The Terrestrial Reconnection Experiment (TREX) currently aims to probe a similar configuration to dayside reconnection by adding a toroidal guide magnetic field, where under the right conditions, high frequency turbulent fluctuations are expected. Using a set of fast Langmuir probes to diagnose the fluctuations, the global structure of the plasma turbulence can be reconstructed. In this poster, an overview of the upgraded experiment and design progress of the fast Lprobe will be provided. NSF/DOE award DE-SC0013032.

WE-E-BRD-01: HDR Brachytherapy I: Overview of Clinical Application and QA

DOE Office of Scientific and Technical Information (OSTI.GOV)

Libby, B; Showalter, T

2014-06-15

With the increased usage of high dose rate (HDR) brachytherapy and the introduction of dedicated image guided brachytherapy suites, it is necessary to review the processes and procedures associated with safely delivering these treatments in the expedited time scales that dedicated treatment suites afford. The speakers will present the clinical aspects of switching from LDR to HDR treatments, including guidelines for patient selection, and the clinical outcomes comparing LDR to HDR. The speakers will also discuss the HDR treatment process itself, because the shortened clinical timeline involved with a streamlined scan/plan/treat workflow can introduce other issues. Safety and QA aspectsmore » involved with the streamlined process, including increased personnel required for parallel tasks, and possible interfering tasks causing delays in patient treatments will also be discussed. Learning Objectives: To understand the clinical aspects of HDR Brachytherapy, including common clinical indications, patient selection, and the evolving evidence in support of this therapeutic modality To review the current prominent clinical trials for HDR brachytherapy To interpret the established guidelines for HDR brachytherapy quality assurance for implementation into practical clinical settings. To introduce the basic requirements for image guided brachytherapy.« less

A Guide for Developing Standard Operating Job Procedures for the Digestion Process Wastewater Treatment Facility. SOJP No. 10.

ERIC Educational Resources Information Center

Schwing, Carl M.

This guide describes standard operating job procedures for the digestion process of wastewater treatment facilities. This process is for reducing the volume of sludge to be treated in subsequent units and to reduce the volatile content of sludge. The guide gives step-by-step instructions for pre-startup, startup, continuous operating, shutdown,…

A Guide for Developing Standard Operating Job Procedures for the Tertiary Multimedia Filtration Process Wastewater Treatment Facility. SOJP No. 7.

ERIC Educational Resources Information Center

Petrasek, Al, Jr.

This guide describes the standard operating job procedures for the tertiary multimedia filtration process of wastewater treatment plants. The major objective of the filtration process is the removal of suspended solids from the reclaimed wastewater. The guide gives step-by-step instructions for pre-start up, start-up, continuous operation, and…

Voter Education Manual for Secondary Schools and a Teacher's Guide to Student Handouts in the Voter Education Manual.

ERIC Educational Resources Information Center

Balasco, Alfred P.; And Others

This classroom guide instructs secondary school students about the registration process, the voting process, and the importance of the American electoral system. The goal is to encourage students to participate in the electoral process. Although the guide focuses most heavily on the specifics of voter education in Rhode Island, it is also…

Practice patterns of image guided particle therapy in Europe: A 2016 survey of the European Particle Therapy Network (EPTN).

PubMed

Bolsi, Alessandra; Peroni, Marta; Amelio, Dante; Dasu, Alexandru; Stock, Markus; Toma-Dasu, Iuliana; Nyström, Petra Witt; Hoffmann, Aswin

2018-03-28

Image guidance is critical in achieving accurate and precise radiation delivery in particle therapy, even more than in photon therapy. However, equipment, quality assurance procedures and clinical workflows for image-guided particle therapy (IGPT) may vary substantially between centres due to a lack of standardization. A survey was conducted to evaluate the current practice of IGPT in European particle therapy centres. In 2016, a questionnaire was distributed among 19 particle therapy centres in 12 European countries. The questionnaire consisted of 30 open and 37 closed questions related to image guidance in the general clinical workflow, for moving targets, current research activities and future perspectives of IGPT. All centres completed the questionnaire. The IGPT methods used by the 10 treating centres varied substantially. The 9 non-treating centres were in the process to introduce IGPT. Most centres have developed their own IGPT strategies, being tightly connected to their specific technical implementation and dose delivery methods. Insight into the current clinical practice of IGPT in European particle therapy centres was obtained. A variety in IGPT practices and procedures was confirmed, which underlines the need for harmonisation of practice parameters and consensus guidelines. Copyright © 2018 Elsevier B.V. All rights reserved.

Impairment Rating Ambiguity in the United States: The Utah Impairment Guides for Calculating Workers' Compensation Impairments

PubMed Central

Hunter, Bradley; Bunkall, Larry D.; Holmes, Edward B.

2009-01-01

Since the implementation of workers' compensation, accurately and consistently rating impairment has been a concern for the employee and employer, as well as rating physicians. In an attempt to standardize and classify impairments, the American Medical Association (AMA) publishes the AMA Guides ("Guides"), and recently published its 6th edition of the AMA Guides. Common critiques of the AMA Guides 6th edition are that they are too complex, lacking in evidence-based methods, and rarely yield consistent ratings. Many states mandate use of some edition of the AMA Guides, but few states are adopting the current edition due to the increasing difficulty and frustration with their implementation. A clearer, simpler approach is needed. Some states have begun to develop their own supplemental guides to combat problems in complexity and validity. Likewise studies in Korea show that past methods for rating impairment are outdated and inconsistent, and call for measures to adapt current methods to Korea's specific needs. The Utah Supplemental Guides to the AMA Guides have been effective in increasing consistency in rating impairment. It is estimated that litigation of permanent impairment has fallen below 1% and Utah is now one of the least costly states for obtaining workers' compensation insurance, while maintaining a medical fee schedule above the national average. Utah's guides serve as a model for national or international impairment guides. PMID:19503678

The New Guide to Effective Media Relations. The Best of "CASE Currents."

ERIC Educational Resources Information Center

Raley, Nancy, Ed.; Carter, Laura, Ed.

Developing an effective communications program is crucial for the survival of colleges, universities, and independent schools because they must be well understood and have broad public support. This guide to media relations compiles articles from "CASE Currents" into five sections: "The Basics of a News Service" (17 papers);…

Toward Building a Typology for the Evaluation of Services in Family Support Programs.

ERIC Educational Resources Information Center

Manalo, Victor; Meezan, William

2000-01-01

Articulates how the family support movement emerged in the last 20 years, and describes the philosophical premises, principles, and practices that currently guide it. Considers the inability of current family support program typologies to guide outcome evaluations, and introduces a typology that deconstructs family support programs into their…

The role of guide field on magnetic reconnection during island coalescence

DOE Office of Scientific and Technical Information (OSTI.GOV)

Stanier, Adam John; Daughton, William Scott; Simakov, Andrei Nikolaevich

A number of studies have considered how the rate of magnetic reconnection scales in large and weakly collisional systems by the modelling of long reconnecting current sheets. However, this set-up neglects both the formation of the current sheet and the coupling between the diffusion region and a larger system that supplies the magnetic flux. Recent studies of magnetic island merging, which naturally include these features, have found that ion kinetic physics is crucial to describe the reconnection rate and global evolution of such systems. In this paper, the effect of a guide field on reconnection during island merging is considered.more » In contrast to the earlier current sheet studies, we identify a limited range of guide fields for which the reconnection rate, outflow velocity, and pile-up magnetic field increase in magnitude as the guide field increases. The Hall-MHD fluid model is found to reproduce kinetic reconnection rates only for a sufficiently strong guide field, for which ion inertia breaks the frozen-in condition and the outflow becomes Alfvénic in the kinetic system. The merging of large islands occurs on a longer timescale in the zero guide field limit, which may in part be due to a mirror-like instability that occurs upstream of the reconnection region.« less

The role of guide field on magnetic reconnection during island coalescence

DOE PAGES

Stanier, Adam John; Daughton, William Scott; Simakov, Andrei Nikolaevich; ...

2017-02-01

A number of studies have considered how the rate of magnetic reconnection scales in large and weakly collisional systems by the modelling of long reconnecting current sheets. However, this set-up neglects both the formation of the current sheet and the coupling between the diffusion region and a larger system that supplies the magnetic flux. Recent studies of magnetic island merging, which naturally include these features, have found that ion kinetic physics is crucial to describe the reconnection rate and global evolution of such systems. In this paper, the effect of a guide field on reconnection during island merging is considered.more » In contrast to the earlier current sheet studies, we identify a limited range of guide fields for which the reconnection rate, outflow velocity, and pile-up magnetic field increase in magnitude as the guide field increases. The Hall-MHD fluid model is found to reproduce kinetic reconnection rates only for a sufficiently strong guide field, for which ion inertia breaks the frozen-in condition and the outflow becomes Alfvénic in the kinetic system. The merging of large islands occurs on a longer timescale in the zero guide field limit, which may in part be due to a mirror-like instability that occurs upstream of the reconnection region.« less

A Guide for Developing Standard Operating Job Procedures for the Sludge Conditioning & Dewatering Process Wastewater Treatment Facility. SOJP No. 11.

ERIC Educational Resources Information Center

Schwing, Carl M.

This guide describes standard operating job procedures for the sludge conditioning and dewatering process of wastewater treatment facilities. In this process, sludge is treated with chemicals to make the sludge coagulate and give up its water more easily. The treated sludge is then dewatered using a vacuum filter. The guide gives step-by-step…

Improvement Guides for I.A. Curriculum

ERIC Educational Resources Information Center

Ritz, John M.; Wright, Lawrence S.

1977-01-01

Describes a project to revise "The Wisconsin Guide to Local Curriculum Improvement in Industrial Education, K-12", originally prepared in 1973. Four figures from the guide are included: (1) model of a field objective, (2) curriculum planning model, (3) instructional development process, and (4) process for developing objectives. (MF)

High-Intensity Focused Ultrasound: Current Status for Image-Guided Therapy

PubMed Central

Copelan, Alexander; Hartman, Jason; Chehab, Monzer; Venkatesan, Aradhana M.

2015-01-01

Image-guided high-intensity focused ultrasound (HIFU) is an innovative therapeutic technology, permitting extracorporeal or endocavitary delivery of targeted thermal ablation while minimizing injury to the surrounding structures. While ultrasound-guided HIFU was the original image-guided system, MR-guided HIFU has many inherent advantages, including superior depiction of anatomic detail and superb real-time thermometry during thermoablation sessions, and it has recently demonstrated promising results in the treatment of both benign and malignant tumors. HIFU has been employed in the management of prostate cancer, hepatocellular carcinoma, uterine leiomyomas, and breast tumors, and has been associated with success in limited studies for palliative pain management in pancreatic cancer and bone tumors. Nonthermal HIFU bioeffects, including immune system modulation and targeted drug/gene therapy, are currently being explored in the preclinical realm, with an emphasis on leveraging these therapeutic effects in the care of the oncology patient. Although still in its early stages, the wide spectrum of therapeutic capabilities of HIFU offers great potential in the field of image-guided oncologic therapy. PMID:26622104

A ten-step process to develop case management plans.

PubMed

Tahan, Hussein A

2002-01-01

The use of case management plans has contained cost and improved quality of care successfully. However, the process of developing these plans remains a great challenge for healthcare executives, in this article, the author presents the answer to this challenge by discussing a 10-step formal process that administrators of patient care services and case managers can adapt to their institutions. It also can be used by interdisciplinary team members as a practical guide to develop a specific case management plan. This process is applicable to any care setting (acute, ambulatory, long term, and home care), diagnosis, or procedure. It is particularly important for those organizations that currently do not have a deliberate and systematic process to develop case management plans and are struggling with how to improve the efficiency and productivity of interdisciplinary teams charged with developing case management plans.

3D bioprinting matrices with controlled pore structure and release function guide in vitro self-organization of sweat gland.

PubMed

Liu, Nanbo; Huang, Sha; Yao, Bin; Xie, Jiangfan; Wu, Xu; Fu, Xiaobing

2016-10-03

3D bioprinting matrices are novel platforms for tissue regeneration. Tissue self-organization is a critical process during regeneration that implies the features of organogenesis. However, it is not clear from the current evidences whether 3D printed construct plays a role in guiding tissue self-organization in vitro. Based on our previous study, we bioprinted a 3D matrix as the restrictive niche for direct sweat gland differentiation of epidermal progenitors by different pore structure (300-μm or 400-μm nozzle diameters printed) and reported a long-term gradual transition of differentiated cells into glandular morphogenesis occurs within the 3D construct in vitro. At the initial 14-day culture, an accelerated cell differentiation was achieved with inductive cues released along with gelatin reduction. After protein release completed, the 3D construct guide the self-organized formation of sweat gland tissues, which is similar to that of the natural developmental process. However, glandular morphogenesis was only observed in 300-μm-printed constructs. In the absence of 3D architectural support, glandular morphogenesis was not occurred. This striking finding made us to identify a previously unknown role of the 3D-printed structure in glandular tissue regeneration, and this self-organizing strategy can be applied to forming other tissues in vitro.

Home-Made Money: Consumer's Guide to Home Equity Conversion.

ERIC Educational Resources Information Center

Scholen, Ken

This guide was written to introduce consumers to home equity conversion (HEC) plans that are currently available and to explain the current state of HEC developments. It describes how the basic types of HEC plans work, gives examples of how how they can be used, discusses their advantages and disadvantages, and tells where they are available.…

Ocean Currents: Marine Science Activities for Grades 5-8. Teacher's Guide.

ERIC Educational Resources Information Center

Halversen, Catherine; Beals, Kevin; Strang, Craig

This teacher's guide attempts to answer questions such as: What causes ocean currents? What impact do they have on Earth's environment? and How have they influenced human history? Seven innovative activities are provided in which students can gain fascinating insights into the earth as the ocean planet. Activities focus on how wind, temperature,…

ROMI-RIP: Rough Mill RIP-first simulator user's guide

Treesearch

R. Edward Thomas

1995-01-01

The ROugh Mill RIP-first simulator (ROMI-RIP) is a computer software package for IBM compatible personal computers that simulates current industrial practices for gang-ripping lumber. This guide shows the user how to set and examine the results of simulations regarding current or proposed mill practices. ROMI-RIP accepts cutting bills with up to 300 different part...

Structural Basis for Guide RNA Processing and Seed-Dependent DNA Targeting by CRISPR-Cas12a.

PubMed

Swarts, Daan C; van der Oost, John; Jinek, Martin

2017-04-20

The CRISPR-associated protein Cas12a (Cpf1), which has been repurposed for genome editing, possesses two distinct nuclease activities: endoribonuclease activity for processing its own guide RNAs and RNA-guided DNase activity for target DNA cleavage. To elucidate the molecular basis of both activities, we determined crystal structures of Francisella novicida Cas12a bound to guide RNA and in complex with an R-loop formed by a non-cleavable guide RNA precursor and a full-length target DNA. Corroborated by biochemical experiments, these structures reveal the mechanisms of guide RNA processing and pre-ordering of the seed sequence in the guide RNA that primes Cas12a for target DNA binding. Furthermore, the R-loop complex structure reveals the strand displacement mechanism that facilitates guide-target hybridization and suggests a mechanism for double-stranded DNA cleavage involving a single active site. Together, these insights advance our mechanistic understanding of Cas12a enzymes and may contribute to further development of genome editing technologies. Copyright © 2017 Elsevier Inc. All rights reserved.

Model-based guiding pattern synthesis for robust assembly of contact layers using directed self-assembly

NASA Astrophysics Data System (ADS)

Mitra, Joydeep; Torres, Andres; Ma, Yuansheng; Pan, David Z.

2018-01-01

Directed self-assembly (DSA) has emerged as one of the most compelling next-generation patterning techniques for sub 7 nm via or contact layers. A key issue in enabling DSA as a mainstream patterning technique is the generation of grapho-epitaxy-based guiding pattern (GP) shapes to assemble the contact patterns on target with high fidelity and resolution. Current GP generation is mostly empirical, and limited to a very small number of via configurations. We propose the first model-based GP synthesis algorithm and methodology for on-target and robust DSA, on general via pattern configurations. The final postoptical proximity correction-printed GPs derived from our original synthesized GPs are resilient to process variations and continue to maintain the same DSA fidelity in terms of placement error and target shape.

Magnetic Resonance-Guided High-Intensity Focused Ultrasound (MR-HIFU) in Treatment of Symptomatic Uterine Myomas

PubMed Central

Filipowska, Justyna; Łoziński, Tomasz

2014-01-01

Summary Magnetic Resonance-guided High-Intensity Focused Ultrasound (MR-HIFU) is a noninvasive technique for ablation therapy for uterine myomas, where focused ultrasound energy beam generates localized high temperature in the selected area and coagulates chosen tissue, leaving the skin and tissues in between unharmed. Magnetic resonance imaging enables accurate targeting for HIFU as well as temperature monitoring during treatment. MR guidance with 3D anatomical imaging provides reference data for treatment planning, while real-time temperature monitoring aids in controlling ablation process. This review provides basic information regarding methodology, clinical indications for this kind of treatment, expected outcome and patient management during MR-HIFU procedure. The aim of this work is to introduce a new, noninvasive treatment method for uterine leiomyomas and to present a comparison with other currently used methods. PMID:25469176

Magnetic Resonance-Guided High-Intensity Focused Ultrasound (MR-HIFU) in Treatment of Symptomatic Uterine Myomas.

PubMed

Filipowska, Justyna; Loziński, Tomasz

2014-01-01

Magnetic Resonance-guided High-Intensity Focused Ultrasound (MR-HIFU) is a noninvasive technique for ablation therapy for uterine myomas, where focused ultrasound energy beam generates localized high temperature in the selected area and coagulates chosen tissue, leaving the skin and tissues in between unharmed. Magnetic resonance imaging enables accurate targeting for HIFU as well as temperature monitoring during treatment. MR guidance with 3D anatomical imaging provides reference data for treatment planning, while real-time temperature monitoring aids in controlling ablation process. This review provides basic information regarding methodology, clinical indications for this kind of treatment, expected outcome and patient management during MR-HIFU procedure. The aim of this work is to introduce a new, noninvasive treatment method for uterine leiomyomas and to present a comparison with other currently used methods.

Application Processing, 2003-2004. EDExpress Training. Participant Guide.

ERIC Educational Resources Information Center

Office of Student Financial Assistance (ED), Washington, DC.

This participant guide contains training materials for processing applications for student financial aid under the EDExpress system. Representatives of institutions of higher education receive training in the use of EDExpress software that allows the school to manage student financial aid records. The guide contains these sessions: (1) welcome and…

Photographic Processes. Curriculum Guide for Technology Education.

ERIC Educational Resources Information Center

Lacy, Henry Heston

This curriculum guide for a 1-semester or 1-year course in photography promotes exploratory study of the following areas: (1) color processing; (2) technical applications in black and white; (3) special effects in lighting techniques; and (4) career opportunities in commercial photography. The guide contains a course outline, competencies (task…

Structural/aerodynamic Blade Analyzer (SAB) User's Guide, Version 1.0

NASA Technical Reports Server (NTRS)

Morel, M. R.

1994-01-01

The structural/aerodynamic blade (SAB) analyzer provides an automated tool for the static-deflection analysis of turbomachinery blades with aerodynamic and rotational loads. A structural code calculates a deflected blade shape using aerodynamic loads input. An aerodynamic solver computes aerodynamic loads using deflected blade shape input. The two programs are iterated automatically until deflections converge. Currently, SAB version 1.0 is interfaced with MSC/NASTRAN to perform the structural analysis and PROP3D to perform the aerodynamic analysis. This document serves as a guide for the operation of the SAB system with specific emphasis on its use at NASA Lewis Research Center (LeRC). This guide consists of six chapters: an introduction which gives a summary of SAB; SAB's methodology, component files, links, and interfaces; input/output file structure; setup and execution of the SAB files on the Cray computers; hints and tips to advise the user; and an example problem demonstrating the SAB process. In addition, four appendices are presented to define the different computer programs used within the SAB analyzer and describe the required input decks.

An Electromagnetic Sensor for the Autonomous Running of Visually Impaired and Blind Athletes (Part II: The Wearable Device).

PubMed

Pieralisi, Marco; Di Mattia, Valentina; Petrini, Valerio; De Leo, Alfredo; Manfredi, Giovanni; Russo, Paola; Scalise, Lorenzo; Cerri, Graziano

2017-02-16

Currently, the availability of technology developed to increase the autonomy of visually impaired athletes during sports is limited. The research proposed in this paper (Part I and Part II) focuses on the realization of an electromagnetic system that can guide a blind runner along a race track without the need for a sighted guide. In general, the system is composed of a transmitting unit (widely described in Part I) and a receiving unit, whose components and main features are described in this paper. Special attention is paid to the definition of an electromagnetic model able to faithfully represent the physical mechanisms of interaction between the two units, as well as between the receiving magnetic sensor and the body of the user wearing the device. This theoretical approach allows for an estimation of the signals to be detected, and guides the design of a suitable signal processing board. This technology has been realized, patented, and tested with a blind volunteer with successful results and this paper presents interesting suggestions for further improvements.

An Electromagnetic Sensor for the Autonomous Running of Visually Impaired and Blind Athletes (Part II: The Wearable Device)

PubMed Central

Pieralisi, Marco; Di Mattia, Valentina; Petrini, Valerio; De Leo, Alfredo; Manfredi, Giovanni; Russo, Paola; Scalise, Lorenzo; Cerri, Graziano

2017-01-01

Currently, the availability of technology developed to increase the autonomy of visually impaired athletes during sports is limited. The research proposed in this paper (Part I and Part II) focuses on the realization of an electromagnetic system that can guide a blind runner along a race track without the need for a sighted guide. In general, the system is composed of a transmitting unit (widely described in Part I) and a receiving unit, whose components and main features are described in this paper. Special attention is paid to the definition of an electromagnetic model able to faithfully represent the physical mechanisms of interaction between the two units, as well as between the receiving magnetic sensor and the body of the user wearing the device. This theoretical approach allows for an estimation of the signals to be detected, and guides the design of a suitable signal processing board. This technology has been realized, patented, and tested with a blind volunteer with successful results and this paper presents interesting suggestions for further improvements. PMID:28212348

The role of electron heat flux in guide-field magnetic reconnection

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hesse, Michael; Kuznetsova, Masha; Birn, Joachim

2004-12-01

A combination of analytical theory and particle-in-cell simulations are employed in order to investigate the electron dynamics near and at the site of guide field magnetic reconnection. A detailed analysis of the contributions to the reconnection electric field shows that both bulk inertia and pressure-based quasiviscous processes are important for the electrons. Analytic scaling demonstrates that conventional approximations for the electron pressure tensor behavior in the dissipation region fail, and that heat flux contributions need to be accounted for. Based on the evolution equation of the heat flux three tensor, which is derived in this paper, an approximate form ofmore » the relevant heat flux contributions to the pressure tensor is developed, which reproduces the numerical modeling result reasonably well. Based on this approximation, it is possible to develop a scaling of the electron current layer in the central dissipation region. It is shown that the pressure tensor contributions become important at the scale length defined by the electron Larmor radius in the guide magnetic field.« less

Computational Studies of Magnetic Nozzle Performance

NASA Technical Reports Server (NTRS)

Ebersohn, Frans H.; Longmier, Benjamin W.; Sheehan, John P.; Shebalin, John B.; Raja, Laxminarayan

2013-01-01

An extensive literature review of magnetic nozzle research has been performed, examining previous work, as well as a review of fundamental principles. This has allow us to catalog all basic physical mechanisms which we believe underlie the thrust generation process. Energy conversion mechanisms include the approximate conservation of the magnetic moment adiabatic invariant, generalized hall and thermoelectric acceleration, swirl acceleration, thermal energy transformation into directed kinetic energy, and Joule heating. Momentum transfer results from the interaction of the applied magnetic field with currents induced in the plasma plume., while plasma detachment mechanisms include resistive diffusion, recombination and charge exchange collisions, magnetic reconnection, loss of adiabaticity, inertial forces, current closure, and self-field detachment. We have performed a preliminary study of Hall effects on magnetic nozzle jets with weak guiding magnetic fields and weak expansions (p(sub jet) approx. = P(sub background)). The conclusion from this study is that the Hall effect creates an azimuthal rotation of the plasma jet and, more generally, creates helical structures in the induced current, velocity field, and magnetic fields. We have studied plasma jet expansion to near vacuum without a guiding magnetic field, and are presently including a guiding magnetic field using a resistive MHD solver. This research is progressing toward the implementation of a full generalized Ohm's law solver. In our paper, we will summarize the basic principle, as well as the literature survey and briefly review our previous results. Our most recent results at the time of submittal will also be included. Efforts are currently underway to construct an experiment at the University of Michigan Plasmadynamics and Electric Propulsion Laboratory (PEPL) to study magnetic nozzle physics for a RF-thruster. Our computational study will work directly with this experiment to validate the numerical model, in order to study magnetic nozzle physics and optimize magnetic nozzle design. Preliminary results from the PEPL experiment will also be presented.

Counseling Directory and Consumer's Guide: Implementing Professional Disclosure and Consumer Protection.

ERIC Educational Resources Information Center

Swanson, John L.

1979-01-01

The publication of a "counseling directory" and "consumer's guide" is a new approach that can be used to respond to the current professional issues of professional disclosure and consumer protection. Reviews the purposes, format, and content of both the directory and guide. (Author)

Model Training Guide. Firefighter I.

ERIC Educational Resources Information Center

Hagevig, William A.; Gallagher, Leigh S.

This firefighter training guide for a 180-hour course was developed to assist training officers in planning training with emphasis on conformance to recommended National Fire Protection Association (NFPA 1001) standards. The material in the guide is referenced to current editions of the International Fire Service Training Association manuals and…

A Guide to Curriculum Planning in Foreign Language.

ERIC Educational Resources Information Center

Wisconsin State Dept. of Public Instruction, Madison.

A guide designed to help local curriculum planners develop and implement curriculums to provide all students with equal access to foreign languages provides an overview of current philosophies, objectives, methods, materials, and equipment and a guide to sequential program development, articulation, and evaluation. An introductory section…

A Hitchhiker’s Guide to Mechanobiology

PubMed Central

Eyckmans, Jeroen; Boudou, Thomas; Yu, Xiang; Chen, Christopher S.

2011-01-01

More than a century ago, it was proposed that mechanical forces could drive tissue formation. However, only recently with the advent of enabling biophysical and molecular technologies are we beginning to understand how individual cells transduce mechanical force into biochemical signals. In turn, this knowledge of mechanotransduction at the cellular level is beginning to clarify the role of mechanics in patterning processes during embryonic development. In this perspective, we will discuss current mechanotransduction paradigms, along with the technologies that have shaped the field of mechanobiology. PMID:21763607

Esthetic considerations for the treatment of the edentulous maxilla based on current informatic alternatives: a case report.

PubMed

Rodríguez-Tizcareño, Mario H; Barajas, Lizbeth; Pérez-Gásque, Marisol; Gómez, Salvador

2012-06-01

This report presents a protocol used to transfer the virtual treatment plan data to the surgical and prosthetic reality and its clinical application, bone site augmentation with computer-custom milled bovine bone graft blocks to their ideal architecture form, implant insertion based on image-guided stent fabrication, and the restorative manufacturing process through computed tomography-based software programs and navigation systems and the computer-aided design and manufacturing techniques for the treatment of the edentulous maxilla.

Analysis on influence of guide vanes closure laws of pump-turbine on load rejection transient process

NASA Astrophysics Data System (ADS)

Yao, Z.; Bi, H. L.; Huang, Q. S.; Li, Z. J.; Wang, Z. W.

2013-12-01

In load rejection transient process, the sudden shut down of guide vanes may cause units speed rise and a sharp increase in water hammer pressure of diversion system, which endangers the safety operation of the power plant. Adopting reasonable guide vane closure law is a kind of economic and effective measurement to reduce the water hammer pressure and limit rotational speed increases. In this paper, combined with Guangzhou Pumped Storage Power Station plant A, the load rejection condition under different guide vanes closure laws is calculated and the key factor of guide vanes closure laws on the impact of the load rejection transition process is analyzed. The different inflection points, which are the closure modes, on the impact of unit speed change, water level fluctuation of surge tank, and the pressure fluctuation of volute inlet and draft tube inlet are further discussed. By compared with the calculation results, a reasonable guide vanes inflection point position can be determined according to security requirements and a reasonable guide vanes closure law can be attained to effectively coordinate the unit speed rise and the rapid pressure change in the load rejection transient process.

Microcirculatory monitoring in septic patients: Where do we stand?

PubMed

Gruartmoner, G; Mesquida, J; Ince, C

Microcirculatory alterations play a pivotal role in sepsis-related morbidity and mortality. However, since the microcirculation has been a "black box", current hemodynamic management of septic patients is still guided by macrocirculatory parameters. In the last decades, the development of several technologies has shed some light on microcirculatory evaluation and monitoring, and the possibility of incorporating microcirculatory variables to clinical practice no longer seems to be beyond reach. The present review provides a brief summary of the current technologies for microcirculatory evaluation, and attempts to explore the potential role and benefits of their integration to the resuscitation process in critically ill septic patients. Copyright © 2016 Elsevier España, S.L.U. y SEMICYUC. All rights reserved.

A guide for building biological pathways along with two case studies: hair and breast development.

PubMed

Trindade, Daniel; Orsine, Lissur A; Barbosa-Silva, Adriano; Donnard, Elisa R; Ortega, J Miguel

2015-03-01

Genomic information is being underlined in the format of biological pathways. Building these biological pathways is an ongoing demand and benefits from methods for extracting information from biomedical literature with the aid of text-mining tools. Here we hopefully guide you in the attempt of building a customized pathway or chart representation of a system. Our manual is based on a group of software designed to look at biointeractions in a set of abstracts retrieved from PubMed. However, they aim to support the work of someone with biological background, who does not need to be an expert on the subject and will play the role of manual curator while designing the representation of the system, the pathway. We therefore illustrate with two challenging case studies: hair and breast development. They were chosen for focusing on recent acquisitions of human evolution. We produced sub-pathways for each study, representing different phases of development. Differently from most charts present in current databases, we present detailed descriptions, which will additionally guide PESCADOR users along the process. The implementation as a web interface makes PESCADOR a unique tool for guiding the user along the biointeractions, which will constitute a novel pathway. Copyright © 2014 Elsevier Inc. All rights reserved.

Merging long range transportation planning with public health: a case study from Utah's Wasatch Front.

PubMed

Burbidge, Shaunna K

2010-01-01

US transportation systems have been identified as a problem for public health, as they often encourage automobile transportation and discourage physical activity. This paper provides a case study examination of the Public Health Component of the Wasatch Front Regional Council's Regional Transportation Plan. This plan provides an example of what transportation planners at Utah's largest metropolitan planning organization (MPO) are doing to encourage physical activity through transportation. Existing active living research was used to guide recommendations using a process that included a comprehensive literature review and a review of existing state programs, advisory group and stakeholder meetings, and policy recommendations based on existing local conditions. Stakeholders from a diversity of background and interests came together with one common goal: to improve public health. Based on this collaborative process, nine policy approaches were specifically recommended for approval and integration in the Wasatch Front Regional Transportation Plan. By using current research as a guide and integrating a variety of interests, the Wasatch Front Regional Council is setting a new standard for a collaborative multi-modal focus in transportation planning, which can be replicated nationwide.

The Contextualized Technology Adaptation Process (CTAP): Optimizing Health Information Technology to Improve Mental Health Systems.

PubMed

Lyon, Aaron R; Wasse, Jessica Knaster; Ludwig, Kristy; Zachry, Mark; Bruns, Eric J; Unützer, Jürgen; McCauley, Elizabeth

2016-05-01

Health information technologies have become a central fixture in the mental healthcare landscape, but few frameworks exist to guide their adaptation to novel settings. This paper introduces the contextualized technology adaptation process (CTAP) and presents data collected during Phase 1 of its application to measurement feedback system development in school mental health. The CTAP is built on models of human-centered design and implementation science and incorporates repeated mixed methods assessments to guide the design of technologies to ensure high compatibility with a destination setting. CTAP phases include: (1) Contextual evaluation, (2) Evaluation of the unadapted technology, (3) Trialing and evaluation of the adapted technology, (4) Refinement and larger-scale implementation, and (5) Sustainment through ongoing evaluation and system revision. Qualitative findings from school-based practitioner focus groups are presented, which provided information for CTAP Phase 1, contextual evaluation, surrounding education sector clinicians' workflows, types of technologies currently available, and influences on technology use. Discussion focuses on how findings will inform subsequent CTAP phases, as well as their implications for future technology adaptation across content domains and service sectors.

Beyond the Billboard: The Facebook-Based Application, Donor, and Its Guided Approach to Facilitating Living Organ Donation.

PubMed

Bramstedt, K A; Cameron, A M

2017-02-01

Living donor solicitation can raise ethical concerns, regardless of the medium used: newspaper, television, pulpit, billboard or Internet. Moving the search for a living donor into the social media realm introduces the risk of unguided and coercive patient narratives as well as decoupling or even total absence of information that could aid the consent process. The Facebook application (app) for living donors, called Donor (restricted to patient use), aims to address these concerns in several ways: (i) by directing the patient's initial appeal to friends and family; (ii) by guiding the patient's narrative; and (iii) by providing a library of clinical, ethical and regulatory information that informs the consent process. In this paper, we explored these features and contrasted them with billboard solicitation activities and current independent social media efforts. We concluded that the proactive ethical design of the Donor app is a permissible way to help satisfy the shortfall of deceased donor livers and kidneys. © Copyright 2016 The American Society of Transplantation and the American Society of Transplant Surgeons.

Funding Sources for Community and Economic Development 1997: A Guide to Current Sources for Local Programs and Projects. Third Edition.

ERIC Educational Resources Information Center

1997

This guide contains information on 2,086 funding programs that provide support on national, state, and local levels for economic and community development, social services, and the humanities. The guide begins with "A Guide to Proposal Planning and Writing" (Lynn E. Miner), which includes strategies for locating information on public and private…

Optimal uneven-aged stocking guides: an application to spruce-fir stands in New England

Treesearch

Jeffrey H. Gove; Mark J. Ducey

2014-01-01

Management guides for uneven-aged forest stands periodically need to be revisited and updated based on new information and methods. The current silvicultural guide for uneven-aged spruce-fir management in Maine and the northeast (Frank, R.M. and Bjorkbom, J.C. 1973 A silvicultural guide for spruce-fir in the northeast. General Technical Report NE-6, Forest Service. U.S...

Guiding optimal biofuels :

DOE Office of Scientific and Technical Information (OSTI.GOV)

Paap, Scott M.; West, Todd H.; Manley, Dawn Kataoka

2013-01-01

In the current study, processes to produce either ethanol or a representative fatty acid ethyl ester (FAEE) via the fermentation of sugars liberated from lignocellulosic materials pretreated in acid or alkaline environments are analyzed in terms of economic and environmental metrics. Simplified process models are introduced and employed to estimate process performance, and Monte Carlo analyses were carried out to identify key sources of uncertainty and variability. We find that the near-term performance of processes to produce FAEE is significantly worse than that of ethanol production processes for all metrics considered, primarily due to poor fermentation yields and higher electricitymore » demands for aerobic fermentation. In the longer term, the reduced cost and energy requirements of FAEE separation processes will be at least partially offset by inherent limitations in the relevant metabolic pathways that constrain the maximum yield potential of FAEE from biomass-derived sugars.« less

Design and fabrication of label-free biochip using a guided mode resonance filter with nano grating structures by injection molding process.

PubMed

Cho, E; Kim, B; Choi, S; Han, J; Jin, J; Han, J; Lim, J; Heo, Y; Kim, S; Sung, G Y; Kang, S

2011-01-01

This paper introduces technology to fabricate a guided mode resonance filter biochip using injection molding. Of the various nanofabrication processes that exist, injection molding is the most suitable for the mass production of polymer nanostructures. Fabrication of a nanograting pattern for guided mode resonance filters by injection molding requires a durable metal stamp, because of the high injection temperature and pressure. Careful consideration of the optimized process parameters is also required to achieve uniform sub-wavelength gratings with high fidelity. In this study, a metallic nanostructure pattern to be used as the stamp for the injection molding process was fabricated using electron beam lithography, a UV nanoimprinting process, and an electroforming process. A one-dimensional nanograting substrate was replicated by injection molding, during which the process parameters were controlled. To evaluate the geometric quality of the injection molded nanograting patterns, the surface profile of the fabricated nanograting for different processing conditions was analyzed using an atomic force microscope and a scanning electron microscope. Finally, to demonstrate the feasibility of the proposed process for fabricating guided mode resonance filter biochips, a high-refractive-index material was deposited on the polymer nanograting and its guided mode resonance characteristics were analyzed.

An Investigation of Hall Currents Associated with Tripolar Magnetic Fields During Magnetospheric Kelvin Helmholtz Waves

NASA Astrophysics Data System (ADS)

Sturner, A. P.; Eriksson, S.; Newman, D. L.; Lapenta, G.; Gershman, D. J.; Plaschke, F.; Ergun, R.; Wilder, F. D.; Torbert, R. B.; Giles, B. L.; Strangeway, R. J.; Russell, C. T.; Burch, J. L.

2016-12-01

Kinetic simulations and observations of magnetic reconnection suggest the Hall term of Ohm's Law is necessary for understanding fast reconnection in the Earth's magnetosphere. During high (>1) guide field plasma conditions in the solar wind and in Earth's magnetopause, tripolar variations in the guide magnetic field are often observed during current sheet crossings, and have been linked to reconnection Hall magnetic fields. Two proposed mechanisms for these tripolar variations are the presence of multiple nearby X-lines and magnetic island coalescence. We present results of an investigation into the structure of the electron currents supporting tripolar guide magnetic field variations during Kelvin-Helmholtz wave current sheet crossings using the Magnetosphere Multiscale (MMS) Mission, and compare with bipolar magnetic field structures and with kinetic simulations to understand how these tripolar structures may be used as tracers for magnetic islands.

Mass Communication: A Guide to Reference Sources.

ERIC Educational Resources Information Center

McGill Univ., Montreal (Quebec). McLennan Library.

For the study of mass communication in social, cultural and political contexts, this annotated resource guide presents a list of materials available in the McGill University Libraries in Montreal, Canada. As a select bibliography, the guide concentrates on current sources, although some historical coverage of newspaper and journalism is included.…

STDs & HIV: A Guide for Today's Teens. 2nd Edition. Instructor's Guide.

ERIC Educational Resources Information Center

Yarber, William L.

This curriculum represents the current approach to prevention education about sexually transmitted diseases (STD) for students in grades 7-12, combining health messages about STD, including HIV/AIDS, into one curriculum. The instructor's guide discusses adolescents' need for STD/HIV prevention education; presents information about the…

Foreign Language Curriculum Guide.

ERIC Educational Resources Information Center

North Dakota State Dept. of Public Instruction, Bismarck.

The purpose of this guide is to provide a resource for the development of modern and classical language curricula at the local level in North Dakota schools. The guide contains two sections, one dealing with modern languages, the other with Latin. Each section provides an overview of current philosophy, objectives, methods, and resources in…

Food Buying Guide for Family Day Care Homes.

ERIC Educational Resources Information Center

Food and Nutrition Service (USDA), Chicago, IL. Midwest Regional Office.

Offered in this guide are facts enabling family day care providers in Michigan to serve meals meeting meal pattern requirements of the state's Child Care Food Program. Adapted from the "Food Buying Guide for Child Nutrition Programs," contents are based on the latest Federal regulations and meal pattern requirements, current food…

Evaluation of current Louisiana flexible pavement structures using PMS data and new mechanistic-empirical pavement design guide.

DOT National Transportation Integrated Search

2012-04-01

The new Mechanistic-Empirical Pavement Design Guide (MEPDG) developed under the National Cooperative Highway Research Program (NCHRP) Project 1-37A represents a major change as compared to the 1993 AASHTO Pavement Design Guide. The MEPDG provides a r...

Food Buying Guide for Child Nutrition Programs. Revised.

ERIC Educational Resources Information Center

Davis, Dorothy W.; And Others

This guide is based on the latest federal regulations and meal pattern requirements for the National School Lunch and Breakfast Programs. It considers current food production and marketing techniques, packaging methods, grading standards, and changing food habits in the American population. The guide gives average yield information on over 600…

Evaluation of current Louisiana flexible pavement structures using PMS data and new mechanistic-empirical pavement design guide : tech summary.

DOT National Transportation Integrated Search

2012-04-01

The new Mechanistic-Empirical Pavement Design Guide (MEPDG) developed under the National Cooperative Highway : Research Program (NCHRP) Project 1-37A represents a major change as compared to the 1993 AASHTO Pavement : Design Guide. MEPDG provides a r...

CNN Newsroom Classroom Guides. April 1-30, 1998.

ERIC Educational Resources Information Center

Cable News Network, Atlanta, GA.

CNN Newsroom is a daily 15-minute commercial-free news program specifically produced for classroom use and provided free to participating schools. These daily Classroom Guides are designed to accompany the broadcast, and contain activities for discussing top stories, headlines, and other current events topics; each guide also includes World Wide…

VET Providers Planning to Deliver Degrees: Good Practice Guide

ERIC Educational Resources Information Center

National Centre for Vocational Education Research (NCVER), 2015

2015-01-01

This good practice guide is intended to assist public and private registered training organisations (RTOs) planning to commence higher education (HE) delivery. The guide is based on research undertaken by Victor Callan and Kaye Bowman, who completed case studies with six providers currently delivering higher education qualifications in addition to…

Women's History Curriculum Guide.

ERIC Educational Resources Information Center

Ruthsdotter, Mary, Ed.; Eisenberg, Bonnie, Ed.

This curriculum guide is designed to facilitate teachers' first efforts to introduce information about women in U.S. history. The guide promotes a multicultural awareness of women's history beginning with the Native Americans and proceeding to current issues of diversity. Activities are divided for grades 1-6 and 7-12 but may be adapted as…

In Focus: Alcohol and Alcoholism Audiovisual Guide.

ERIC Educational Resources Information Center

National Clearinghouse for Alcohol Information (DHHS), Rockville, MD.

This guide reviews audiovisual materials currently available on alcohol abuse and alcoholism. An alphabetical index of audiovisual materials is followed by synopses of the indexed materials. Information about the intended audience, price, rental fee, and distributor is included. This guide also provides a list of publications related to media…

Science: Grade 7. Interim Guide.

ERIC Educational Resources Information Center

Manitoba Dept. of Education and Training, Winnipeg.

This guide is one of a set of 10 science guides, each covering a separate grade in Manitoba, together covering kindergarten through grade 9. The guides have been designed to provide a framework for building scientific concepts and developing the learning of process skills. They replace an earlier set of guides dated 1979. Each guide is essentially…

Science: Grade 6. Interim Guide.

ERIC Educational Resources Information Center

Manitoba Dept. of Education and Training, Winnipeg.

This guide is one of a set of 10 science guides, each covering a separate grade in Manitoba, together covering kindergarten through grade 9. The guides have been designed to provide a framework for building scientific concepts and developing the learning of process skills. They replace an earlier set of guides dated 1979. Each guide is essentially…

Science: Grade 8. Interim Guide.

ERIC Educational Resources Information Center

Manitoba Dept. of Education and Training, Winnipeg.

This guide is one of a set of 10 science guides, each covering a separate grade in Manitoba, together covering kindergarten through grade 9. The guides have been designed to provide a framework for building scientific concepts and developing the learning of process skills. They replace an earlier set of guides dated 1979. Each guide is essentially…

Science: Grade 2. Interim Guide.

ERIC Educational Resources Information Center

Manitoba Dept. of Education and Training, Winnipeg.

This guide is one of a set of 10 science guides, each covering a separate grade in Manitoba, together covering kindergarten through grade 9. The guides have been designed to provide a framework for building scientific concepts and developing the learning of process skills. They replace an earlier set of guides dated 1979. Each guide is essentially…

Science: Grade 1. Interim Guide.

ERIC Educational Resources Information Center

Manitoba Dept. of Education and Training, Winnipeg.

This guide is one of a set of 10 science guides, each covering a separate grade in Manitoba, together covering kindergarten through grade 9. The guides have been designed to provide a framework for building scientific concepts and developing the learning of process skills. They replace an earlier set of guides dated 1979. Each guide is essentially…

Science: Kindergarten. Interim Guide.

ERIC Educational Resources Information Center

Manitoba Dept. of Education and Training, Winnipeg.

This guide is one of a set of 10 science guides, each covering a separate grade in Manitoba, together covering kindergarten through grade 9. The guides have been designed to provide a framework for building scientific concepts and developing the learning of process skills. They replace an earlier set of guides dated 1979. Each guide is essentially…

The European Society of Therapeutic Radiology and Oncology-European Institute of Radiotherapy (ESTRO-EIR) report on 3D CT-based in-room image guidance systems: a practical and technical review and guide.

PubMed

Korreman, Stine; Rasch, Coen; McNair, Helen; Verellen, Dirk; Oelfke, Uwe; Maingon, Philippe; Mijnheer, Ben; Khoo, Vincent

2010-02-01

The past decade has provided many technological advances in radiotherapy. The European Institute of Radiotherapy (EIR) was established by the European Society of Therapeutic Radiology and Oncology (ESTRO) to provide current consensus statement with evidence-based and pragmatic guidelines on topics of practical relevance for radiation oncology. This report focuses primarily on 3D CT-based in-room image guidance (3DCT-IGRT) systems. It will provide an overview and current standing of 3DCT-IGRT systems addressing the rationale, objectives, principles, applications, and process pathways, both clinical and technical for treatment delivery and quality assurance. These are reviewed for four categories of solutions; kV CT and kV CBCT (cone-beam CT) as well as MV CT and MV CBCT. It will also provide a framework and checklist to consider the capability and functionality of these systems as well as the resources needed for implementation. Two different but typical clinical cases (tonsillar and prostate cancer) using 3DCT-IGRT are illustrated with workflow processes via feedback questionnaires from several large clinical centres currently utilizing these systems. The feedback from these clinical centres demonstrates a wide variability based on local practices. This report whilst comprehensive is not exhaustive as this area of development remains a very active field for research and development. However, it should serve as a practical guide and framework for all professional groups within the field, focussed on clinicians, physicists and radiation therapy technologists interested in IGRT. Copyright 2010 Elsevier Ireland Ltd. All rights reserved.

Shore Shapers: Introducing children and the general public to biogeomorphological processes and geodiversity

NASA Astrophysics Data System (ADS)

Naylor, Larissa; Coombes, Martin; Sewell, Jack; White, Anissia

2014-05-01

Coastal processes shape the coast into a variety of eye-catching and enticing landforms that attract people to marvel at, relax and enjoy coastal geomorphology. Field guides to explain these processes (and the geodiversity that results) to the general public and children are few and far between. In contrast, there is a relative wealth of resources and organised activities introducing people to coastal wildlife, especially on rocky shores. These biological resources typically focus on the biology and climatic controls on their distribution, rather than how the biology interacts with its physical habitat. As an outcome of two recent rock coast biogeomorphology projects (www.biogeomorph.org/coastal/coastaldefencedbiodiversity and www.biogeomorph.org/coastal/bioprotection ), we produced the first known guide to understanding how biogeomorphological processes help create coastal landforms. The 'Shore Shapers' guide (www.biogeomorph.org/coastal/shoreshapers) is designed to: a) bring biotic-geomorphic interactions to life and b) introduce some of the geomorphological and geological controls on biogeomorphic processes and landform development. The guide provides scientific information in an accessible and interactive way - to help sustain children's interest and extend their learning. We tested a draft version of our guide with children, the general public and volunteers on rocky shore rambles using social science techniques and of 74 respondents, 75.6% were more interested in understanding how rock pools (i.e. coastal landforms) develop after seeing the guide. Respondents' opinions about key bioprotective species also changed as a result of seeing the guide - 58% of people found barnacles unattractive before they saw the guide whilst 36% of respondents were more interested in barnacles after seeing the guide. These results demonstrate that there is considerable interest in more educational materials on coastal biogeomorphology and geodiversity.

Missouri Introduction to Materials and Processing Technology. Instructor Guide.

ERIC Educational Resources Information Center

Missouri Univ., Columbia. Instructional Materials Lab.

This guide is intended to support a high school specialization course in materials and processing technology. The document contains three sections: (1) information on using the material; (2) a set of instructor guides for eight instructional units; (3) 15 technological activity modules and teacher and student instructions for their use; and (4)…

Coding the Composing Process: A Guide for Teachers and Researchers.

ERIC Educational Resources Information Center

Perl, Sondra

Designed for teachers and researchers interested in the study of the composing process, this guide introduces a method of analysis that can be applied to data from a range of different cases. Specifically, the guide offers a simple, direct coding scheme for describing the movements occurring during composing that involves four procedures: teaching…

A Resource Guide for Oceanography and Coastal Processes.

ERIC Educational Resources Information Center

Walker, Sharon H., Ed.; Damon-Randall, Kimberly, Ed.; Walters, Howard D., Ed.

This resource guide was developed for elementary, middle, and high school teachers to teach about oceanography and coastal processes. This guide contains information on the program's history and names and contact information for all Operation Pathfinder participants since 1993. The body is divided into 6 topics. Topic 1 is on Physical Parameters,…

Current Issues: Critical Issues Confronting the Nation and the World. 1997 Edition [and] Teacher's Guide.

ERIC Educational Resources Information Center

Close Up Foundation, Arlington, VA.

This student text and teacher's guide feature current events and policy issues that are in discussion today. The books offer background on 20 important domestic and foreign policy issues and present arguments from both sides of key issues. The books are divided into three sections. Section 1, "The Federal Government," contains: (1) "The Clinton…

A Comprehensive Guide to Readers Theatre: Enhancing Fluency and Comprehension in Middle School and Beyond

ERIC Educational Resources Information Center

Black, Alison; Stave, Anna M.

2007-01-01

With the current education climate so focused on accountability, teachers need to ensure that their teaching practices are supported by today's content-specific standards. To meet this need, "A Comprehensive Guide to Readers Theatre" shows not only how to implement Readers Theatre in the classroom but also how to use it to meet current literacy…

System of Systems Engineering and Integration Process for Network Transport Assessment

DTIC Science & Technology

2016-09-01

SOSE&I CONCEPTS The DOD-sourced “Systems Engineering Guide for Systems of Systems” provides an overview of the SoS environment and SE considerations...usage as a guide in application of systems engineering processes. They are listed verbatim below as defined in the DOD SE guide (ODUSD[A&T]SSE 2008...Technology (A&T), Systems and Software Engineering (SSE). 2008. Systems Engineering Guide for Systems of Systems. Washington, DC: ODUSD(A&T)SSE

Intertextual learning strategy with guided inquiry on solubility equilibrium concept to improve the student’s scientific processing skills

NASA Astrophysics Data System (ADS)

Wardani, K. U.; Mulyani, S.; Wiji

2018-04-01

The aim of this study was to develop intertextual learning strategy with guided inquiry on solubility equilibrium concept to enhance student’s scientific processing skills. This study was conducted with consideration of some various studies which found that lack of student’s process skills in learning chemistry was caused by learning chemistry is just a concept. The method used in this study is a Research and Development to generate the intertextual learning strategy with guided inquiry. The instruments used in the form of sheets validation are used to determine the congruence of learning activities by step guided inquiry learning and scientific processing skills with aspects of learning activities. Validation results obtained that the learning activities conducted in line with aspects of indicators of the scientific processing skills.

User-centered design and the development of patient decision aids: protocol for a systematic review.

PubMed

Witteman, Holly O; Dansokho, Selma Chipenda; Colquhoun, Heather; Coulter, Angela; Dugas, Michèle; Fagerlin, Angela; Giguere, Anik Mc; Glouberman, Sholom; Haslett, Lynne; Hoffman, Aubri; Ivers, Noah; Légaré, France; Légaré, Jean; Levin, Carrie; Lopez, Karli; Montori, Victor M; Provencher, Thierry; Renaud, Jean-Sébastien; Sparling, Kerri; Stacey, Dawn; Vaisson, Gratianne; Volk, Robert J; Witteman, William

2015-01-26

Providing patient-centered care requires that patients partner in their personal health-care decisions to the full extent desired. Patient decision aids facilitate processes of shared decision-making between patients and their clinicians by presenting relevant scientific information in balanced, understandable ways, helping clarify patients' goals, and guiding decision-making processes. Although international standards stipulate that patients and clinicians should be involved in decision aid development, little is known about how such involvement currently occurs, let alone best practices. This systematic review consisting of three interlinked subreviews seeks to describe current practices of user involvement in the development of patient decision aids, compare these to practices of user-centered design, and identify promising strategies. A research team that includes patient and clinician representatives, decision aid developers, and systematic review method experts will guide this review according to the Cochrane Handbook and PRISMA reporting guidelines. A medical librarian will hand search key references and use a peer-reviewed search strategy to search MEDLINE, EMBASE, PubMed, Web of Science, the Cochrane Library, the ACM library, IEEE Xplore, and Google Scholar. We will identify articles across all languages and years describing the development or evaluation of a patient decision aid, or the application of user-centered design or human-centered design to tools intended for patient use. Two independent reviewers will assess article eligibility and extract data into a matrix using a structured pilot-tested form based on a conceptual framework of user-centered design. We will synthesize evidence to describe how research teams have included users in their development process and compare these practices to user-centered design methods. If data permit, we will develop a measure of the user-centeredness of development processes and identify practices that are likely to be optimal. This systematic review will provide evidence of current practices to inform approaches for involving patients and other stakeholders in the development of patient decision aids. We anticipate that the results will help move towards the establishment of best practices for the development of patient-centered tools and, in turn, help improve the experiences of people who face difficult health decisions. PROSPERO CRD42014013241.

Effective Literacy and English Language Instruction for English Learners in the Elementary Grades. IES Practice Guide. NCEE 2007-4011

ERIC Educational Resources Information Center

Gersten, Russell; Baker, Scott K.; Shanahan, Timothy; Linan-Thompson, Sylvia; Collins, Penny; Scarcella, Robin

2007-01-01

This Practice Guide is the first in a series of the Institute of Education Sciences (IES) guides in education that are developed by a panel of experts. The guides are intended to bring the best available evidence and expertise to bear on the types of systemic challenges that cannot currently be addressed by single intervention or programs. This…

Analysis of Nursing Clinical Decision Support Requests and Strategic Plan in a Large Academic Health System.

PubMed

Whalen, Kimberly; Bavuso, Karen; Bouyer-Ferullo, Sharon; Goldsmith, Denise; Fairbanks, Amanda; Gesner, Emily; Lagor, Charles; Collins, Sarah

2016-01-01

To understand requests for nursing Clinical Decision Support (CDS) interventions at a large integrated health system undergoing vendor-based EHR implementation. In addition, to establish a process to guide both short-term implementation and long-term strategic goals to meet nursing CDS needs. We conducted an environmental scan to understand current state of nursing CDS over three months. The environmental scan consisted of a literature review and an analysis of CDS requests received from across our health system. We identified existing high priority CDS and paper-based tools used in nursing practice at our health system that guide decision-making. A total of 46 nursing CDS requests were received. Fifty-six percent (n=26) were specific to a clinical specialty; 22 percent (n=10) were focused on facilitating clinical consults in the inpatient setting. "Risk Assessments/Risk Reduction/Promotion of Healthy Habits" (n=23) was the most requested High Priority Category received for nursing CDS. A continuum of types of nursing CDS needs emerged using the Data-Information-Knowledge-Wisdom Conceptual Framework: 1) facilitating data capture, 2) meeting information needs, 3) guiding knowledge-based decision making, and 4) exposing analytics for wisdom-based clinical interpretation by the nurse. Identifying and prioritizing paper-based tools that can be modified into electronic CDS is a challenge. CDS strategy is an evolving process that relies on close collaboration and engagement with clinical sites for short-term implementation and should be incorporated into a long-term strategic plan that can be optimized and achieved overtime. The Data-Information-Knowledge-Wisdom Conceptual Framework in conjunction with the High Priority Categories established may be a useful tool to guide a strategic approach for meeting short-term nursing CDS needs and aligning with the organizational strategic plan.

Optical properties of current ceramics systems for laminate veneers.

PubMed

Bagis, Bora; Turgut, Sedanur

2013-08-01

Full-ceramic systems can be produced by different techniques (layering, heatpressing, CAD/CAM) and have various compositions with different crystalline contents that may affect the optical properties of laminate restorations. A total of 60 specimens were prepared from e.max Press, e.max CAD, Empress Esthetic, e.max Ceram, Inline, and ZirPress systems (A1 shade; diameter 10mm; thickness 0.5 ± 0.05mm). The L*, a*, and b* values, chroma and translucency (TP) of each system were recorded before and after ageing. The statistical analyses were performed by ANOVA, Tukey's tests and the paired sample t-test (p<0.05). The L* value of the shade guide was significantly different from those of the full-ceramic systems; however, there were no significant differences between the a* values of Ceram, Esthetic, Inline and Zirpress. There were significant differences between the b* values of the shade guide compared with the full-ceramics except for e.max Press. The L* values decreased, and the a* and b* values increased after the ageing process for all groups. There were no significant differences between the ΔE values of the ceramic systems (p>0.05). The TP values decreased, and the chroma value increased significantly after the ageing process (p>0.05). The chroma of the shade guide was found to be the highest. None of the full-ceramic systems was able to match the color of the shade guide. The chemical structures of the ceramic systems were more effective for determining the optical parameters than the fabrication techniques. Ageing caused full-ceramics to become more opaque, darker, reddish and yellowish. Copyright © 2012 Elsevier Ltd. All rights reserved.

On Multiple Hall-Like Electron Currents and Tripolar Guide Magnetic Field Perturbations During Kelvin-Helmholtz Waves

NASA Astrophysics Data System (ADS)

Sturner, Andrew P.; Eriksson, Stefan; Nakamura, Takuma; Gershman, Daniel J.; Plaschke, Ferdinand; Ergun, Robert E.; Wilder, Frederick D.; Giles, Barbara; Pollock, Craig; Paterson, William R.; Strangeway, Robert J.; Baumjohann, Wolfgang; Burch, James L.

2018-02-01

Two magnetopause current sheet crossings with tripolar guide magnetic field signatures were observed by multiple Magnetosphere Multiscale (MMS) spacecraft during Kelvin-Helmholtz wave activity. The two out-of-plane magnetic field depressions of the tripolar guide magnetic field are largely supported by the observed in-plane electron currents, which are reminiscent of two clockwise Hall current loop systems. A comparison with a three-dimensional kinetic simulation of Kelvin-Helmholtz waves and vortex-induced reconnection suggests that MMS likely encountered the two Hall magnetic field depressions on either side of a magnetic reconnection X-line. Moreover, MMS observed an out-of-plane current reversal and a corresponding in-plane magnetic field rotation at the center of one of the current sheets, suggesting the presence of two adjacent flux ropes. The region inside one of the ion-scale flux ropes was characterized by an observed decrease of the total magnetic field, a strong axial current, and significant enhancements of electron density and parallel electron temperature. The flux rope boundary was characterized by currents opposite this axial current, strong in-plane and converging electric fields, parallel electric fields, and weak electron-frame Joule dissipation. These return current region observations may reflect a need to support the axial current rather than representing local reconnection signatures in the absence of any exhausts.

Orthopaedic service lines-revisited.

PubMed

Patterson, Cheryl

2008-01-01

This article revisits the application of orthopaedic service lines from early introduction and growth of this organizational approach in the 1980s, through the 1990s, and into the current decade. The author has experienced and worked in various service-line structures through these three decades, as well as the preservice-line era of 1970s orthopaedics. Past lessons learned during earlier phases and then current trends and analysis by industry experts are summarized briefly, with indication given of the future for service lines. Variation versus consistency of certain elements in service-line definitions and in operational models is discussed. Main components of service-line structures and typical processes are described briefly, along with a more detailed section on the service-line director/manager role. Current knowledge contained here will help guide the reader to more "out-of-the-box" thinking toward comprehensive orthopaedic centers of excellence.

Ligand placement based on prior structures: the guided ligand-replacement method

DOE Office of Scientific and Technical Information (OSTI.GOV)

Klei, Herbert E.; Bristol-Myers Squibb, Princeton, NJ 08543-4000; Moriarty, Nigel W., E-mail: nwmoriarty@lbl.gov

2014-01-01

A new module, Guided Ligand Replacement (GLR), has been developed in Phenix to increase the ease and success rate of ligand placement when prior protein-ligand complexes are available. The process of iterative structure-based drug design involves the X-ray crystal structure determination of upwards of 100 ligands with the same general scaffold (i.e. chemotype) complexed with very similar, if not identical, protein targets. In conjunction with insights from computational models and assays, this collection of crystal structures is analyzed to improve potency, to achieve better selectivity and to reduce liabilities such as absorption, distribution, metabolism, excretion and toxicology. Current methods formore » modeling ligands into electron-density maps typically do not utilize information on how similar ligands bound in related structures. Even if the electron density is of sufficient quality and resolution to allow de novo placement, the process can take considerable time as the size, complexity and torsional degrees of freedom of the ligands increase. A new module, Guided Ligand Replacement (GLR), was developed in Phenix to increase the ease and success rate of ligand placement when prior protein–ligand complexes are available. At the heart of GLR is an algorithm based on graph theory that associates atoms in the target ligand with analogous atoms in the reference ligand. Based on this correspondence, a set of coordinates is generated for the target ligand. GLR is especially useful in two situations: (i) modeling a series of large, flexible, complicated or macrocyclic ligands in successive structures and (ii) modeling ligands as part of a refinement pipeline that can automatically select a reference structure. Even in those cases for which no reference structure is available, if there are multiple copies of the bound ligand per asymmetric unit GLR offers an efficient way to complete the model after the first ligand has been placed. In all of these applications, GLR leverages prior knowledge from earlier structures to facilitate ligand placement in the current structure.« less

Inside KidVid: The Essential Parents' Guide to Video.

ERIC Educational Resources Information Center

MacAlpine, Loretta

This guide aims to help parents choose stimulating, educational, and fun videos for their children from the more than 7,000 currently available. The guide includes: 10 tips for evaluating and choosing videos; interviews with and advice from experts; annotated descriptions of more than 400 recommended videos; essential information such as suggested…

Improving Mathematical Problem Solving in Grades 4 through 8. IES Practice Guide. NCEE 2012-4055

ERIC Educational Resources Information Center

Woodward, John; Beckmann, Sybilla; Driscoll, Mark; Franke, Megan; Herzig, Patricia; Jitendra, Asha; Koedinger, Kenneth R.; Ogbuehi, Philip

2012-01-01

The Institute of Education Sciences (IES) publishes practice guides in education to bring the best available evidence and expertise to bear on current challenges in education. Authors of practice guides combine their expertise with the findings of rigorous research, when available, to develop specific recommendations for addressing these…

A Catalog of Tasks, Performance Objectives, Performance Guides, Tools, and Equipment, Homemaker Human Development.

ERIC Educational Resources Information Center

Watkins, Betty; And Others

This catalog was designed to provide performance objectives and performance guides associated with current occupational information relating to the job of homemaker. The performance objectives and guides were developed following a literature review and a survey of random samples of homemakers in the five participating states (Alabama, Florida,…

Exploring E-Learning. IES Report 376.

ERIC Educational Resources Information Center

Pollard, E.; Hillage, J.

This guide summarizes current research and commentary on e-learning, examining the key issues facing organizations exploring e-learning for employee development. The guide contains six sections. The first section provides an introduction to the issue of e-learning and a summary of the issues discussed in the remainder of the guide. Section 2…

Manatees: An Educator's Guide. Fourth Edition.

ERIC Educational Resources Information Center

Save the Manatee Club, Maitland, FL.

The manatee is known for its gentleness and uniqueness and has become a symbol of human concern for endangered species. This guide provides current information on the West Indian manatee as well as strategies for teaching about this endangered animal. While focusing on the manatee, this guide points out the importance of interdependencies within…

Analytic Guided-Search Model of Human Performance Accuracy in Target- Localization Search Tasks

NASA Technical Reports Server (NTRS)

Eckstein, Miguel P.; Beutter, Brent R.; Stone, Leland S.

2000-01-01

Current models of human visual search have extended the traditional serial/parallel search dichotomy. Two successful models for predicting human visual search are the Guided Search model and the Signal Detection Theory model. Although these models are inherently different, it has been difficult to compare them because the Guided Search model is designed to predict response time, while Signal Detection Theory models are designed to predict performance accuracy. Moreover, current implementations of the Guided Search model require the use of Monte-Carlo simulations, a method that makes fitting the model's performance quantitatively to human data more computationally time consuming. We have extended the Guided Search model to predict human accuracy in target-localization search tasks. We have also developed analytic expressions that simplify simulation of the model to the evaluation of a small set of equations using only three free parameters. This new implementation and extension of the Guided Search model will enable direct quantitative comparisons with human performance in target-localization search experiments and with the predictions of Signal Detection Theory and other search accuracy models.

Cohort Default Rate Guide.

ERIC Educational Resources Information Center

Department of Education, Washington, DC. Default Management Div.

This guide is designed to assist schools with their Federal Family Education Loan Program (FFEL) and the William D. Ford Federal Direct Loan (Direct Loan) Program cohort default rate. The guide is a reference tool in understanding cohort default rates and processes. This guide incorporates two former guides, the "Draft Cohort Default Rate…

The Construct of Attention in Schizophrenia

PubMed Central

Luck, Steven J.; Gold, James M.

2008-01-01

Schizophrenia is widely thought to involve deficits of attention. However, the term attention can be defined so broadly that impaired performance on virtually any task could be construed as evidence for a deficit in attention, and this has slowed cumulative progress in understanding attention deficits in schizophrenia. To address this problem, we divide the general concept of attention into two distinct constructs: input selection, the selection of task-relevant inputs for further processing; and rule selection, the selective activation of task-appropriate rules. These constructs are closely tied to working memory, because input selection mechanisms are used to control the transfer of information into working memory and because working memory stores the rules used by rule selection mechanisms. These constructs are also closely tied to executive function, because executive systems are used to guide input selection and because rule selection is itself at key aspect of executive function. Within the domain of input selection, it is important to distinguish between the control of selection—the processes that guide attention to task-relevant inputs—and the implementation of selection—the processes that enhance the processing of the relevant inputs and suppress the irrelevant inputs. Current evidence suggests that schizophrenia involves a significant impairment in the control of selection but little or no impairment in the implementation of selection. Consequently, the CNTRICS participants agreed by consensus that attentional control should be a priority target for measurement and treatment research in schizophrenia. PMID:18374901

Appreciation of the nature of light demands enhancement over the prevailing scientific epistemology

NASA Astrophysics Data System (ADS)

Roychoudhuri, Chandrasekhar

2011-09-01

Based on attempts to resolve the problem of various self contradictory assumptions behind the prevailing belief on single photon interference, we have analyzed the process steps behind our experimental measurements and named the process as the Interaction Process Mapping Epistemology (IPM-E). This has helped us recognize that the quantum mechanical Measurement Problem has a much universal and deeper root in nature. Our scientific theorization process suffers from a Perpetual Information Challenge (PIC), which cannot be overcome by elegant and/or sophisticated mathematical theories alone. Iterative imaginative application of IPM-E needs to be used as a metaphorical analytical continuation to fill up the missing information gaps. IPM-E has also guided us to recognize the generic NIW-principle (Non-Interaction of Waves) in the linear domain, not explicitly recognized in current books and literature. Superposition effects become manifest through light-matter interactions. Detecting dipoles gets stimulated by multiple superposed beams; it sums the simultaneous multiple stimulations into a single resultant undulation, which then guides the resultant energy exchange. The consequent transformation in the detector corresponds to observed fringes. They neither represent interference of light; nor represent selective arrival or non-arrival of photons on the detector. Photons do not possess any force of mutual interaction to generate their redistribution. Implementation of IPM-E requires us to recognize our subjective interpretation propensity with which we are burdened due to our evolutionary successes.

Online Adaptive Radiation Therapy: Implementation of a New Process of Care

PubMed Central

Cao, Minsong; Kishan, Amar; Agazaryan, Nzhde; Thomas, David H; Shaverdian, Narek; Yang, Yingli; Ray, Suzette; Low, Daniel A; Raldow, Ann; Steinberg, Michael L.; Lee, Percy

2017-01-01

Onboard magnetic resonance imaging (MRI) guided radiotherapy is now clinically available in nine centers in the world. This technology has facilitated the clinical implementation of online adaptive radiotherapy (OART), or the ability to alter the daily treatment plan based on tumor and anatomical changes in real-time while the patient is on the treatment table. However, due to the time sensitive nature of OART, implementation in a large and busy clinic has many potential obstacles as well as patient-related safety considerations. In this work, we have described the implementation of this new process of care in the Department of Radiation Oncology at the University of California, Los Angeles (UCLA). We describe the rationale, the initial challenges such as treatment time considerations, technical issues during the process of re-contouring, re-optimization, quality assurance, as well as our current solutions to overcome these challenges. In addition, we describe the implementation of a coverage system with a physician of the day as well as online planners (physicists or dosimetrists) to oversee each OART treatment with patient-specific ‘hand-off’ directives from the patient’s treating physician. The purpose of this effort is to streamline the process without compromising treatment quality and patient safety. As more MRI-guided radiotherapy programs come online, we hope that our experience can facilitate successful adoption of OART in a way that maximally benefits the patient. PMID:29104835

Processing system of jaws tomograms for pathology identification and surgical guide modeling

NASA Astrophysics Data System (ADS)

Putrik, M. B.; Lavrentyeva, Yu. E.; Ivanov, V. Yu.

2015-11-01

The aim of the study is to create an image processing system, which allows dentists to find pathological resorption and to build surgical guide surface automatically. X-rays images of jaws from cone beam tomography or spiral computed tomography are the initial data for processing. One patient's examination always includes up to 600 images (or tomograms), that's why the development of processing system for fast automation search of pathologies is necessary. X-rays images can be useful not for only illness diagnostic but for treatment planning too. We have studied the case of dental implantation - for successful surgical manipulations surgical guides are used. We have created a processing system that automatically builds jaw and teeth boundaries on the x-ray image. After this step, obtained teeth boundaries used for surgical guide surface modeling and jaw boundaries limit the area for further pathologies search. Criterion for the presence of pathological resorption zones inside the limited area is based on statistical investigation. After described actions, it is possible to manufacture surgical guide using 3D printer and apply it in surgical operation.

A Guide for Designing and Implementing a Case Processing System for Child Support Enforcement.

ERIC Educational Resources Information Center

Office of Child Support Enforcement (DHHS), Washington, DC.

This document was written to provide state and local child support offices with help in refining their case processing systems. The guide is divided into five chapters. Chapter I, Case Processing Overview, defines case processing and the case processing functions and provides a narrative description and graphic illustration of the processes…

Feasibility of Prostate Cancer Diagnosis by Transrectal Photo-acoustic Imaging

DTIC Science & Technology

2013-03-01

prostate. Transrectal ultrasound has been used as a guiding tool to direct tissue needle biopsy for prostate cancer diagnosis; it cannot be utilized for...tool currently available for prostate cancer detection; needle biopsy is the current practice for diagnosis of the disease, aiming randomly in the...developing an integrated approach between ultrasound and optical tomography, namely, transrectal ultrasound - guided diffuse optical tomography (TRUS

Programmer's reference manual for the VAX-Gerber link software package. Revision 1. 0

DOE Office of Scientific and Technical Information (OSTI.GOV)

Isobe, G.W.

1985-10-01

This guide provides the information necessary to edit, modify, and run the VAX-Gerber software link. Since the project is in the testing stage and still being modified, this guide discussess the final desired stage along with the current stage. The current stage is to set up as to allow the programmer to easily modify and update codes as necessary.

Medial prefrontal serotonin in the rat is involved in goal-directed behaviour when affect guides decision making.

PubMed

van der Plasse, Geoffrey; La Fors, Sabrina S B M; Meerkerk, Dorie T J; Joosten, Ruud N J M A; Uylings, Harry B M; Feenstra, Matthijs G P

2007-12-01

Across species, serotonin (5-HT) depletion in the prefrontal cortex (PFC) has been shown to cause impaired performance on tests of cognitive flexibility and the processing of affective information (e.g. information with an 'emotional' content). While recent work has explored the specific role of the orbital PFC herein, the role of the medial PFC remains unclear. The aim of our current experiments was to study the role of medial PFC 5-HT in both the processing of affective information and reversal learning across stimulus modalities. To this end, we selectively destroyed 5-HT terminals in the medial PFC of male Wistar rats by means of local infusion of the toxin 5,7-dihydroxytryptamine. Both control and lesioned animals were tested in two reversal learning paradigms with either spatial or odour cues and an affective switch from non-preferred to preferred food rewards. Our results indicate that a pellet switch during reversal learning impaired performance in control animals but not in lesioned animals, independent of the stimulus modality. These results indicate that lesioned animals are not guided in their behaviour by the affective value of the reward like intact animals and thus that medial prefrontal 5-HT is needed for affective processing in goal-directed behaviour.

ANALYTICAL PLANS SUPPORTING THE SWPF GAP ANALYSIS BEING CONDUCTED WITH ENERGYSOLUTIONS AND THE VITREOUS STATE LABORATORY AT THE CUA

DOE Office of Scientific and Technical Information (OSTI.GOV)

Edwards, T.; Peeler, D.

2014-10-28

EnergySolutions (ES) and its partner, the Vitreous State Laboratory (VSL) of The Catholic University of America (CUA), are to provide engineering and technical services support to Savannah River Remediation, LLC (SRR) for ongoing operation of the Defense Waste Processing Facility (DWPF) flowsheet as well as for modifications to improve overall plant performance. SRR has requested that the glass formulation team of Savannah River National Laboratory (SRNL) and ES-VSL develop a technical basis that validates the current Product Composition Control System models for use during the processing of the coupled flowsheet or that leads to the refinements of or modifications tomore » the models that are needed so that they may be used during the processing of the coupled flowsheet. SRNL has developed a matrix of test glasses that are to be batched and fabricated by ES-VSL as part of this effort. This document provides two analytical plans for use by ES-VSL: one plan is to guide the measurement of the chemical composition of the study glasses while the second is to guide the measurement of the durability of the study glasses based upon the results of testing by ASTM’s Product Consistency Test (PCT) Method A.« less

The Performance of the Robo-AO Laser Guide Star Adaptive Optics System at the Kitt Peak 2.1 m Telescope

NASA Astrophysics Data System (ADS)

Jensen-Clem, Rebecca; Duev, Dmitry A.; Riddle, Reed; Salama, Maïssa; Baranec, Christoph; Law, Nicholas M.; Kulkarni, S. R.; Ramprakash, A. N.

2018-01-01

Robo-AO is an autonomous laser guide star adaptive optics (AO) system recently commissioned at the Kitt Peak 2.1 m telescope. With the ability to observe every clear night, Robo-AO at the 2.1 m telescope is the first dedicated AO observatory. This paper presents the imaging performance of the AO system in its first 18 months of operations. For a median seeing value of 1.″44, the average Strehl ratio is 4% in the i\\prime band. After post processing, the contrast ratio under sub-arcsecond seeing for a 2≤slant i\\prime ≤slant 16 primary star is five and seven magnitudes at radial offsets of 0.″5 and 1.″0, respectively. The data processing and archiving pipelines run automatically at the end of each night. The first stage of the processing pipeline shifts and adds the rapid frame rate data using techniques optimized for different signal-to-noise ratios. The second “high-contrast” stage of the pipeline is eponymously well suited to finding faint stellar companions. Currently, a range of scientific programs, including the synthetic tracking of near-Earth asteroids, the binarity of stars in young clusters, and weather on solar system planets are being undertaken with Robo-AO.

Making the Numbers Add up: A Guide for Using Data in College Access and Success Programs. Results and Reflections. An Evaluation Report

ERIC Educational Resources Information Center

Lumina Foundation for Education, 2009

2009-01-01

The purpose of this guide is to help readers clarify their roles in the college access and success system and to identify how they might use data to create change for students. This guide shows how data can strengthen current programs and support broader changes that ease the path to college for students. This guide illuminates how a long-term…

Load Asymmetry Observed During Orion Main Parachute Inflation

NASA Technical Reports Server (NTRS)

Morris, Aaron L.; Taylor, Thomas; Olson, Leah

2011-01-01

The Crew Exploration Vehicle Parachute Assembly System (CPAS) has flight tested the first two generations of the Orion parachute program. Three of the second generation tests instrumented the dispersion bridles of the Main parachute with a Tension Measuring System. The goal of this load measurement was to better understand load asymmetry during the inflation process of a cluster of Main parachutes. The CPAS Main parachutes exhibit inflations that are much less symmetric than current parachute literature and design guides would indicate. This paper will examine loads data gathered on three cluster tests, quantify the degree of asymmetry observed, and contrast the results with published design guides. Additionally, the measured loads data will be correlated with videos of the parachute inflation to make inferences about the shape of the parachute and the relative load asymmetry. The goal of this inquiry and test program is to open a dialogue regarding asymmetrical parachute inflation load factors.

Computational studies of physical properties of Nb-Si based alloys

DOE Office of Scientific and Technical Information (OSTI.GOV)

Ouyang, Lizhi

2015-04-16

The overall goal is to provide physical properties data supplementing experiments for thermodynamic modeling and other simulations such as phase filed simulation for microstructure and continuum simulations for mechanical properties. These predictive computational modeling and simulations may yield insights that can be used to guide materials design, processing, and manufacture. Ultimately, they may lead to usable Nb-Si based alloy which could play an important role in current plight towards greener energy. The main objectives of the proposed projects are: (1) developing a first principles method based supercell approach for calculating thermodynamic and mechanic properties of ordered crystals and disordered latticesmore » including solid solution; (2) application of the supercell approach to Nb-Si base alloy to compute physical properties data that can be used for thermodynamic modeling and other simulations to guide the optimal design of Nb-Si based alloy.« less

Import routes and nuclear functions of Argonaute and other small RNA-silencing proteins.

PubMed

Schraivogel, Daniel; Meister, Gunter

2014-09-01

Small RNAs are important regulators of gene expression in many different organisms. Nuclear and cytoplasmic biogenesis enzymes generate functional small RNAs from double-stranded (ds) or single-stranded (ss) RNA precursors, and mature small RNAs are loaded into Argonaute proteins. In the cytoplasm, small RNAs guide Argonaute proteins to complementary RNAs leading to cleavage of these targets, translational silencing, or mRNA decay. In the nucleus Argonaute proteins engage in transcriptional silencing processes such as epigenetic silencing of repetitive elements at the chromatin level. During the past few years many novel functions of small RNA-guided gene silencing proteins in the nucleus have been reported. However, their specific import routes are largely unknown. In this review we summarize the current knowledge on nuclear transport routes that Argonaute and other RNA-silencing proteins take to carry out their various functions in the nucleus. Copyright © 2014 Elsevier Ltd. All rights reserved.

Quality initiatives: lean approach to improving performance and efficiency in a radiology department.

PubMed

Kruskal, Jonathan B; Reedy, Allen; Pascal, Laurie; Rosen, Max P; Boiselle, Phillip M

2012-01-01

Many hospital radiology departments are adopting "lean" methods developed in automobile manufacturing to improve operational efficiency, eliminate waste, and optimize the value of their services. The lean approach, which emphasizes process analysis, has particular relevance to radiology departments, which depend on a smooth flow of patients and uninterrupted equipment function for efficient operation. However, the application of lean methods to isolated problems is not likely to improve overall efficiency or to produce a sustained improvement. Instead, the authors recommend a gradual but continuous and comprehensive "lean transformation" of work philosophy and workplace culture. Fundamental principles that must consistently be put into action to achieve such a transformation include equal involvement of and equal respect for all staff members, elimination of waste, standardization of work processes, improvement of flow in all processes, use of visual cues to communicate and inform, and use of specific tools to perform targeted data collection and analysis and to implement and guide change. Many categories of lean tools are available to facilitate these tasks: value stream mapping for visualizing the current state of a process and identifying activities that add no value; root cause analysis for determining the fundamental cause of a problem; team charters for planning, guiding, and communicating about change in a specific process; management dashboards for monitoring real-time developments; and a balanced scorecard for strategic oversight and planning in the areas of finance, customer service, internal operations, and staff development. © RSNA, 2012.

Navy electroplating pollution control technology assessment manual

NASA Astrophysics Data System (ADS)

Cushnie, G. C., Jr.

1984-02-01

The report provides information on more than 27 separate technologies encompassing conventional treatment, alternate treatment, material recovery techniques and processes and new plating bath formulations. In addition, the incorporation of a section on in-plant process changes enhances the usefulness of the product in that it highlights noncapital-intensive changes to current practices and/or processes that may have significant bearing on reducing overall chemical and water usage costs as well as consequent wastewater treatment needs and disposal costs. This document was prepared as a joint Air Force-Navy effort. It is intended to serve as a guide for technical personnel making decisions on an appropriate means of meeting effluent limits. The selection of any of the described technologies should be done only after a rigorous identification of site requirements has been performed.

An Inquiry-Based Biochemistry Laboratory Structure Emphasizing Competency in the Scientific Process: A Guided Approach with an Electronic Notebook Format

ERIC Educational Resources Information Center

Hall, Mona L.; Vardar-Ulu, Didem

2014-01-01

The laboratory setting is an exciting and gratifying place to teach because you can actively engage the students in the learning process through hands-on activities; it is a dynamic environment amenable to collaborative work, critical thinking, problem-solving and discovery. The guided inquiry-based approach described here guides the students…

75 FR 62410 - Notice of Proposed Information Collection: Comment Request; The Multifamily Accelerated...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-10-08

... Information Collection: Comment Request; The Multifamily Accelerated Processing Guide AGENCY: Office of the... also lists the following information: Title of Proposal: Multifamily Accelerated Processing Guide (MAP...-0541. Description of the need for the information and proposed use: Multifamily Accelerated Processing...

Field-trip guide to subaqueous volcaniclastic facies in the Ancestral Cascades arc in southern Washington State—The Ohanapecosh Formation and Wildcat Creek beds

USGS Publications Warehouse

Jutzeler, Martin; McPhie, Jocelyn

2017-06-27

Partly situated in the idyllic Mount Rainier National Park, this field trip visits exceptional examples of Oligocene subaqueous volcaniclastic successions in continental basins adjacent to the Ancestral Cascades arc. The >800-m-thick Ohanapecosh Formation (32–26 Ma) and the >300-m-thick Wildcat Creek (27 Ma) beds record similar sedimentation processes from various volcanic sources. Both show evidence of below-wave-base deposition, and voluminous accumulation of volcaniclastic facies from subaqueous density currents and suspension settling. Eruption-fed facies include deposits from pyroclastic flows that crossed the shoreline, from tephra fallout over water, and from probable Surtseyan eruptions, whereas re-sedimented facies comprise subaqueous density currents and debris flow deposits.

Evaluation of liver fibrosis: "Something old, something new…".

PubMed

Almpanis, Zannis; Demonakou, Maria; Tiniakos, Dina

2016-01-01

Hepatic fibrogenesis may gradually result to cirrhosis due to the accumulation of extracellular matrix components as a response to liver injury. Thus, therapeutic decisions in chronic liver disease, regardless of the cause, should first and foremost be guided by an accurate quantification of hepatic fibrosis. Detection and assessment of the extent of hepatic fibrosis represent a challenge in modern Hepatology. Although traditional histological staging systems remain the "best standard", they are not able to quantify liver fibrosis as a dynamic process and may not accurately substage cirrhosis. This review aims to compare the currently used non-invasive methods of measuring liver fibrosis and provide an update in current tissue-based digital techniques developed for this purpose, that may prove of value in daily clinical practice.

A Guide to Health Manpower Resources--1970.

ERIC Educational Resources Information Center

Washington State Dept. of Social and Health Services, Olympia.

The stated objective of this guide is to provide a quantitative description of the current supply of health manpower in the State of Washington. To do so, two methods of data collecting are used, with explanations for each. Precautions for interpreting their data are noted. The major portion (152 of 180 pages) of the guide lists information on…

The Impact of Guided Notes on Post-Secondary Student Achievement: A Meta-Analysis

ERIC Educational Resources Information Center

Larwin, Karen H.; Larwin, David A.

2013-01-01

The common practice of using of guided notes in the post-secondary classroom is not fully appreciated or understood. In an effort to add to the existing research about this phenomenon, the current investigation expands on previously published research and one previously published meta-analysis that examined the impact of guided notes on…

A Citizen's Guide to U.S. Foreign Policy: Election '88. Nonpartisan Briefs on 18 Key Issues.

ERIC Educational Resources Information Center

Hoepli, Nancy, Ed.; And Others

In order to make informed voting decisions citizens need background information on complex foreign policy issues facing the United States. This guide presents current issues and provides information to help citizens cast a thoughtful vote. The guide is divided into six main headings: Leadership; Security; Economic and Social Issues; Critical…

Self-Regulated Learning Strategies of Engineering College Students While Learning Electric Circuit Concepts with Enhanced Guided Notes

ERIC Educational Resources Information Center

Lawanto, Oenardi; Santoso, Harry

2013-01-01

The current study evaluated engineering college students' self-regulated learning (SRL) strategies while learning electric circuit concepts using enhanced guided notes (EGN). Our goal was to describe how students exercise SRL strategies and how their grade performance changes after using EGN. Two research questions guided the study: (1) To what…

Guide To The Transport Acquis

DOT National Transportation Integrated Search

1999-10-01

This "Guide to the Transport Acquis" is an informal document which provides an overview of current EU transport legislation. Following a description of each transport sector, relevant legal instruments are presented along with subsequent amendments o...

Where do we go from here? Moving from systems-based practice process measures to true competency via developmental milestones.

PubMed

Martinez, Johanna; Phillips, Erica; Harris, Christina

2014-01-01

For many educators it has been challenging to meet the Accreditation Council for Graduate Medical Education's requirements for teaching systems-based practice (SBP). An additional layer of complexity for educators is evaluating competency in SBP, despite milestones and entrustable professional activities (EPAs). In order to address this challenge, the authors present the results of a literature review for how SBP is currently being taught and a series of recommendations on how to achieve competency in SBP for graduate medical trainees with the use of milestones. The literature review included 29 articles and demonstrated that only 28% of the articles taught more than one of the six core principles of SBP in a meaningful way. Only 7% of the articles received the highest grade of A. The authors summarize four guiding principles for creating a competency-based curriculum that is in alignment with the Next Accreditation System (NAS): 1) the curriculum needs to include all of the core principles in that competency, 2) the objectives of the curriculum should be driven by clinical outcomes, 3) the teaching modalities need to be interactive and clinically relevant, and 4) the evaluation process should be able to measure competency and be directly reflective of pertinent milestones and/or EPAs. This literature review and the provided guiding principles can guide other residency educators in their development of competency-based curricula that meets the standards of the NAS.

Nonlinear evolution of three-dimensional instabilities of thin and thick electron scale current sheets: Plasmoid formation and current filamentation

DOE Office of Scientific and Technical Information (OSTI.GOV)

Jain, Neeraj; Büchner, Jörg; Max Planck Institute for Solar System Research, Justus-Von-Liebig-Weg-3, Göttingen

Nonlinear evolution of three dimensional electron shear flow instabilities of an electron current sheet (ECS) is studied using electron-magnetohydrodynamic simulations. The dependence of the evolution on current sheet thickness is examined. For thin current sheets (half thickness =d{sub e}=c/ω{sub pe}), tearing mode instability dominates. In its nonlinear evolution, it leads to the formation of oblique current channels. Magnetic field lines form 3-D magnetic spirals. Even in the absence of initial guide field, the out-of-reconnection-plane magnetic field generated by the tearing instability itself may play the role of guide field in the growth of secondary finite-guide-field instabilities. For thicker current sheetsmore » (half thickness ∼5 d{sub e}), both tearing and non-tearing modes grow. Due to the non-tearing mode, current sheet becomes corrugated in the beginning of the evolution. In this case, tearing mode lets the magnetic field reconnect in the corrugated ECS. Later thick ECS develops filamentary structures and turbulence in which reconnection occurs. This evolution of thick ECS provides an example of reconnection in self-generated turbulence. The power spectra for both the thin and thick current sheets are anisotropic with respect to the electron flow direction. The cascade towards shorter scales occurs preferentially in the direction perpendicular to the electron flow.« less

Welding, V-TECS Guide.

ERIC Educational Resources Information Center

Moore, Charles G.; And Others

This guide provides job-related tasks, performance objectives, performance guides, resources, teaching activities, evaluation standards, and criterion-referenced measures in three units of a welding course. Through the curriculum content of the welding course, the guide helps teachers lead students through the learning process, including the…

[Cortical potentials evoked to response to a signal to make a memory-guided saccade].

PubMed

Slavutskaia, M V; Moiseeva, V V; Shul'govskiĭ, V V

2010-01-01

The difference in parameters of visually guided and memory-guided saccades was shown. Increase in the memory-guided saccade latency as compared to that of the visually guided saccades may indicate the deceleration of saccadic programming on the basis of information extraction from the memory. The comparison of parameters and topography of evoked components N1 and P1 of the evoked potential on the signal to make a memory- or visually guided saccade suggests that the early stage of the saccade programming associated with the space information processing is performed predominantly with top-down attention mechanism before the memory-guided saccade and bottom-up mechanism before the visually guided saccade. The findings show that the increase in the latency of the memory-guided saccades is connected with decision making at the central stage of the saccade programming. We proposed that wave N2, which develops in the middle of the latent period of the memory-guided saccades, is correlated with this process. Topography and spatial dynamics of components N1, P1 and N2 testify that the memory-guided saccade programming is controlled by the frontal mediothalamic system of selective attention and left-hemispheric brain mechanisms of motor attention.

Biolistics Transformation of Wheat

NASA Astrophysics Data System (ADS)

Sparks, Caroline A.; Jones, Huw D.

We present a complete, step-by-step guide to the production of transformed wheat plants using a particle bombardment device to deliver plasmid DNA into immature embryos and the regeneration of transgenic plants via somatic embryogenesis. Currently, this is the most commonly used method for transforming wheat and it offers some advantages. However, it will be interesting to see whether this position is challenged as facile methods are developed for delivering DNA by Agrobacterium tumefaciens or by the production of transformants via a germ-line process (see other chapters in this book).

Procedure for extraction of disparate data from maps into computerized data bases

NASA Technical Reports Server (NTRS)

Junkin, B. G.

1979-01-01

A procedure is presented for extracting disparate sources of data from geographic maps and for the conversion of these data into a suitable format for processing on a computer-oriented information system. Several graphic digitizing considerations are included and related to the NASA Earth Resources Laboratory's Digitizer System. Current operating procedures for the Digitizer System are given in a simplified and logical manner. The report serves as a guide to those organizations interested in converting map-based data by using a comparable map digitizing system.

Small spacecraft power and thermal subsystems

NASA Technical Reports Server (NTRS)

Eakman, D.; Lambeck, R.; Mackowski, M.; Slifer, L., Jr.

1994-01-01

This white paper provides a general guide to the conceptual design of satellite power and thermal control subsystems with special emphasis on the unique design aspects associated with small satellites. The operating principles of these technologies are explained and performance characteristics of current and projected components are provided. A tutorial is presented on the design process for both power and thermal subsystems, with emphasis on unique issues relevant to small satellites. The ability of existing technology to meet future performance requirements is discussed. Conclusions and observations are presented that stress cost-effective, high-performance design solutions.

Combating mutations in genetic disease and drug resistance: understanding molecular mechanisms to guide drug design.

PubMed

Albanaz, Amanda T S; Rodrigues, Carlos H M; Pires, Douglas E V; Ascher, David B

2017-06-01

Mutations introduce diversity into genomes, leading to selective changes and driving evolution. These changes have contributed to the emergence of many of the current major health concerns of the 21st century, from the development of genetic diseases and cancers to the rise and spread of drug resistance. The experimental systematic testing of all mutations in a system of interest is impractical and not cost-effective, which has created interest in the development of computational tools to understand the molecular consequences of mutations to aid and guide rational experimentation. Areas covered: Here, the authors discuss the recent development of computational methods to understand the effects of coding mutations to protein function and interactions, particularly in the context of the 3D structure of the protein. Expert opinion: While significant progress has been made in terms of innovative tools to understand and quantify the different range of effects in which a mutation or a set of mutations can give rise to a phenotype, a great gap still exists when integrating these predictions and drawing causality conclusions linking variants. This often requires a detailed understanding of the system being perturbed. However, as part of the drug development process it can be used preemptively in a similar fashion to pharmacokinetics predictions, to guide development of therapeutics to help guide the design and analysis of clinical trials, patient treatment and public health policy strategies.

Guiding concepts for park and wilderness stewardship in an era of global environmental change

USGS Publications Warehouse

Hobbs, Richard J.; Cole, David N.; Yung, Laurie; Zavaleta, Erika S.; Aplet, Gregory H.; Chapin, F. Stuart; Landres, Peter B.; Parsons, David J.; Stephenson, Nathan L.; White, Peter S.; Graber, David M.; Higgs, Eric S.; Millar, Constance I.; Randall, John M.; Tonnessen, Kathy A.; Woodley, Stephen

2010-01-01

The major challenge to stewardship of protected areas is to decide where, when, and how to intervene in physical and biological processes, to conserve what we value in these places. To make such decisions, planners and managers must articulate more clearly the purposes of parks, what is valued, and what needs to be sustained. A key aim for conservation today is the maintenance and restoration of biodiversity, but a broader range of values are also likely to be considered important, including ecological integrity, resilience, historical fidelity (ie the ecosystem appears and functions much as it did in the past), and autonomy of nature. Until recently, the concept of "naturalness" was the guiding principle when making conservation-related decisions in park and wilderness ecosystems. However, this concept is multifaceted and often means different things to different people, including notions of historical fidelity and autonomy from human influence. Achieving the goal of nature conservation intended for such areas requires a clear articulation of management objectives, which must be geared to the realities of the rapid environmental changes currently underway. We advocate a pluralistic approach that incorporates a suite of guiding principles, including historical fidelity, autonomy of nature, ecological integrity, and resilience, as well as managing with humility. The relative importance of these guiding principles will vary, depending on management goals and ecological conditions.

Assistance Dogs: Historic Patterns and Roles of Dogs Placed by ADI or IGDF Accredited Facilities and by Non-Accredited U.S. Facilities

PubMed Central

Walther, Sandra; Yamamoto, Mariko; Thigpen, Abigail Paige; Garcia, Anaissa; Willits, Neil H.; Hart, Lynette A.

2017-01-01

Dogs’ roles to support people with disabilities are increasing. Existing U.S. laws and regulations pertaining to the use of dogs for people with disabilities are only minimally enforced. Pushback legislation against some aspects of uses of assistance dogs currently is being passed or proposed in several states. Further, the U.S. Department of the Army and the Veterans’ Administration support only dogs trained by an Assistance Dogs International (ADI) or International Guide Dog Federation (IGDF) accredited facility. Lacking a mandatory national process for screening the selection, training, and placement of assistance dogs with persons who have disabilities, the U.S. offers a creative but confusing opportunity for people to train their own dogs for any disability. While no U.S. surveillance system monitors assistance dogs, other countries generally have a legislated or regulatory process for approving assistance dogs or a cultural convention for obtaining dogs from accredited facilities. We conducted an online survey investigating current demographics of assistance dogs placed in 2013 and 2014 with persons who have disabilities, by facilities worldwide that are associated with ADI or IGDF and by some non-accredited U.S. facilities. Placement data from ADI and IGDF facilities revealed that in most countries aside from the U.S., guide dogs were by far the main type of assistance dog placed. In the U.S., there were about equal numbers of mobility and guide dogs placed, including many placed by large older facilities, along with smaller numbers of other types of assistance dogs. In non-accredited U.S. facilities, psychiatric dogs accounted for most placements. Dogs for families with an autistic child were increasing in all regions around the world. Of dog breeds placed, accredited facilities usually mentioned Labrador Retrievers and Golden Retrievers, and sometimes, German Shepherd Dogs. The facilities bred their dogs in-house, or acquired them from certain breeders. Non-accredited facilities more often used dogs from shelters or assisted people in training their own dogs. Facilities in Europe and the U.S. place dogs in all roles; other parts of the world primarily focus on guide dogs. Expansion of assistance dogs in many roles is continuing, with numbers of dogs placed accelerating internationally. PMID:28154816

Assistance Dogs: Historic Patterns and Roles of Dogs Placed by ADI or IGDF Accredited Facilities and by Non-Accredited U.S. Facilities.

PubMed

Walther, Sandra; Yamamoto, Mariko; Thigpen, Abigail Paige; Garcia, Anaissa; Willits, Neil H; Hart, Lynette A

2017-01-01

Dogs' roles to support people with disabilities are increasing. Existing U.S. laws and regulations pertaining to the use of dogs for people with disabilities are only minimally enforced. Pushback legislation against some aspects of uses of assistance dogs currently is being passed or proposed in several states. Further, the U.S. Department of the Army and the Veterans' Administration support only dogs trained by an Assistance Dogs International (ADI) or International Guide Dog Federation (IGDF) accredited facility. Lacking a mandatory national process for screening the selection, training, and placement of assistance dogs with persons who have disabilities, the U.S. offers a creative but confusing opportunity for people to train their own dogs for any disability. While no U.S. surveillance system monitors assistance dogs, other countries generally have a legislated or regulatory process for approving assistance dogs or a cultural convention for obtaining dogs from accredited facilities. We conducted an online survey investigating current demographics of assistance dogs placed in 2013 and 2014 with persons who have disabilities, by facilities worldwide that are associated with ADI or IGDF and by some non-accredited U.S. facilities. Placement data from ADI and IGDF facilities revealed that in most countries aside from the U.S., guide dogs were by far the main type of assistance dog placed. In the U.S., there were about equal numbers of mobility and guide dogs placed, including many placed by large older facilities, along with smaller numbers of other types of assistance dogs. In non-accredited U.S. facilities, psychiatric dogs accounted for most placements. Dogs for families with an autistic child were increasing in all regions around the world. Of dog breeds placed, accredited facilities usually mentioned Labrador Retrievers and Golden Retrievers, and sometimes, German Shepherd Dogs. The facilities bred their dogs in-house, or acquired them from certain breeders. Non-accredited facilities more often used dogs from shelters or assisted people in training their own dogs. Facilities in Europe and the U.S. place dogs in all roles; other parts of the world primarily focus on guide dogs. Expansion of assistance dogs in many roles is continuing, with numbers of dogs placed accelerating internationally.

Making Nutrition Education Count: A Guide for Nutrition Education K-6. Kindergarten.

ERIC Educational Resources Information Center

Kratky, Patricia; Haigh, Lois

This guide is first of a series of curriculum guides dealing with nutrition education in grades K-6. The curriculum guide was designed to incorporate knowledge of thirteen concepts into the child's decision-making processes as a food consumer. These concepts, as covered by the guide, are: affecting bodily well-being through nutrition; affecting…

Non-thermal electron distribution functions through 3D magnetic reconnection instabilities in the solar wind

NASA Astrophysics Data System (ADS)

Alejandro Munoz Sepulveda, Patricio; Buechner, Joerg

2017-04-01

The effects of kinetic instabilities on the solar wind electron velocity distribution functions (eVDFs) are mostly well understood under local homogeneous and stationary conditions. But the solar wind also contains current sheets, which affect the local properties of instabilities, turbulence and thus the observed non-maxwellian features in the eVDFs. Those processes are vastly unexplored. Therefore, we aim to investigate the influence of self-consistently generated turbulence via electron-scale instabilities in reconnecting current sheets on the formation of suprathermal features in the eVDFs. For this sake, we carry out 3D fully-kinetic Particle-in-Cell code numerical simulations of force free current sheets with a guide magnetic field. We find extended tails, anisotropic plateaus and non-gyrotropic features in the eVDFs, correlated with the locations and time where micro-turbulence is enhanced in the current sheet due to current-aligned streaming instabilities. We also discuss the influence of the plasma parameters, such as the ion to electron temperature ratio, on the excitation of current sheet instabilities and their effect on the properties of the eVDFs.

Conceptual Demands in the Nuffield O-Level Physics Course

ERIC Educational Resources Information Center

Shayer, Michael

1972-01-01

Critical examination of the Teachers' Guide and Guide to Experiments and Questions Book in O-level Nuffield physics course reveals there may be disadvantages to the current organization when analyzed with psychological considerations. (PS)

Elementary Level Educational Curriculum Guide

DOT National Transportation Integrated Search

1989-01-01

This guide contains current and accurate information about the agricultural aviation industry. The hands-on design or practical approach allows for and encourages flexibility. The designated grade levels serve only as a suggested entry point for inst...

Interim guide for optimum joint performance of concrete pavements.

DOT National Transportation Integrated Search

2011-09-01

The purpose of this guide is to help practitioners understand how to optimize concrete pavement joint performance through the identification, mitigation, and prevention of joint deterioration. It summarizes current knowledge from research and practic...

Data Processing Volume I. Instructor's Guide.

ERIC Educational Resources Information Center

Vittetoe, Jerry

These instructional materials are intended as a guide for the instructor of a block course in introductory vocational data processing. A textbook and supplementary materials of the instructor's choice would probably be used in conjunction with these materials. Topics covered in the 11 units are background and uses of data processing, input/output…

The Democratic Process: Promises and Challenges.

ERIC Educational Resources Information Center

Bragaw, Donald, Ed.

When the Berlin Wall (East Germany) came down, it symbolically foretold the end of the Soviet Union domination of Eastern Europe and Central Asia. This resource guide examines the process toward democratization occurring in those regions. The guide updates the available classroom material on the democratic process. It is divided into three…

MusA: Using Indoor Positioning and Navigation to Enhance Cultural Experiences in a Museum

PubMed Central

Rubino, Irene; Xhembulla, Jetmir; Martina, Andrea; Bottino, Andrea; Malnati, Giovanni

2013-01-01

In recent years there has been a growing interest in the use of multimedia mobile guides in museum environments. Mobile devices have the capabilities to detect the user context and to provide pieces of information suitable to help visitors discover and follow the logical and emotional connections that develop during the visit. In this scenario, location based services (LBS) currently represent an asset, and the choice of the technology to determine users' position, combined with the definition of methods that can effectively convey information, become key issues in the design process. In this work, we present Museum Assistant (MusA), a general framework for the development of multimedia interactive guides for mobile devices. Its main feature is a vision-based indoor positioning system that allows the provision of several LBS, from way-finding to the contextualized communication of cultural contents, aimed at providing a meaningful exploration of exhibits according to visitors' personal interest and curiosity. Starting from the thorough description of the system architecture, the article presents the implementation of two mobile guides, developed to respectively address adults and children, and discusses the evaluation of the user experience and the visitors' appreciation of these applications. PMID:24351645

MusA: using indoor positioning and navigation to enhance cultural experiences in a museum.

PubMed

Rubino, Irene; Xhembulla, Jetmir; Martina, Andrea; Bottino, Andrea; Malnati, Giovanni

2013-12-17

In recent years there has been a growing interest in the use of multimedia mobile guides in museum environments. Mobile devices have the capabilities to detect the user context and to provide pieces of information suitable to help visitors discover and follow the logical and emotional connections that develop during the visit. In this scenario, location based services (LBS) currently represent an asset, and the choice of the technology to determine users' position, combined with the definition of methods that can effectively convey information, become key issues in the design process. In this work, we present Museum Assistant (MusA), a general framework for the development of multimedia interactive guides for mobile devices. Its main feature is a vision-based indoor positioning system that allows the provision of several LBS, from way-finding to the contextualized communication of cultural contents, aimed at providing a meaningful exploration of exhibits according to visitors' personal interest and curiosity. Starting from the thorough description of the system architecture, the article presents the implementation of two mobile guides, developed to respectively address adults and children, and discusses the evaluation of the user experience and the visitors' appreciation of these applications.

Development of a hydro kinetic river turbine with simulation and operational measurement results in comparison

NASA Astrophysics Data System (ADS)

Ruopp, A.; Ruprecht, A.; Riedelbauch, S.; Arnaud, G.; Hamad, I.

2014-03-01

The development of a hydro-kinetic prototype was shown including the compound structure, guide vanes, runner blades and a draft tube section with a steeply sloping, short spoiler. The design process of the hydrodynamic layout was split into three major steps. First the compound and the draft tube section was designed and the best operating point was identified using porous media as replacement for the guide vane and runner section (step one). The best operating point and the volume flux as well as the pressure drop was identified and used for the design of the guide vane section and the runner section. Both were designed and simulated independently (step two). In step three, all parts were merged in stationary simulation runs detecting peak power and operational bandwidth. In addition, the full scale demonstrator was installed in August 2010 and measured in the St. Lawrence River in Quebec supporting the average inflow velocity using ADCP (Acoustic Doppler Current Profiler) and the generator power output over the variable rotational speed. Simulation data and measurements are in good agreement. Thus, the presented approach is a suitable way in designing a hydro kinetic turbine.

Optofluidic encapsulation and manipulation of silicon microchips using image processing based optofluidic maskless lithography and railed microfluidics.

PubMed

Chung, Su Eun; Lee, Seung Ah; Kim, Jiyun; Kwon, Sunghoon

2009-10-07

We demonstrate optofluidic encapsulation of silicon microchips using image processing based optofluidic maskless lithography and manipulation using railed microfluidics. Optofluidic maskless lithography is a dynamic photopolymerization technique of free-floating microstructures within a fluidic channel using spatial light modulator. Using optofluidic maskless lithography via computer-vision aided image processing, polymer encapsulants are fabricated for chip protection and guiding-fins for efficient chip conveying within a fluidic channel. Encapsulated silicon chips with guiding-fins are assembled using railed microfluidics, which is an efficient guiding and heterogeneous self-assembly system of microcomponents. With our technology, externally fabricated silicon microchips are encapsulated, fluidically guided and self-assembled potentially enabling low cost fluidic manipulation and assembly of integrated circuits.

Lightning Threat Analysis for the Space Shuttle Launch Pad and the Payload Changeout Room Using Finite Difference Methods

NASA Technical Reports Server (NTRS)

Collier, Richard S.

1997-01-01

This report describes finite difference computer calculations for the Space Shuttle Launch Pad which predict lightning induced electric currents and electric and magnetic fields caused by a lightning strike to the Lightning Protection System caternary wire. Description of possible lightning threats to Shuttle Payload components together with specifications for protection of these components, result from the calculation of lightning induced electric and magnetic fields inside and outside the during a lightning event. These fields also induce currents and voltages on cables and circuits which may be connected to, or a part of, shuttle payload components. These currents and voltages are also calculated. These threat levels are intended as a guide for designers of payload equipment to specify any shielding and/or lightning protection mitigation which may be required for payload components which are in the process of preparation or being transferred into the Shuttle Orbiter.

A Curriculum Guide to Applications of Science to Technology for Able Learners.

ERIC Educational Resources Information Center

VanTassel-Baska, Joyce, Ed.; And Others

This curriculum guide was developed with the intention of providing an enrichment option for gifted and talented learners who are interested in pursuing current issues and topics in the fields of mathematics and science. The scope of the guide is meant to encompass a year's study of a set of topics which apply mathematics to science and…

The Role of Target-Distractor Relationships in Guiding Attention and the Eyes in Visual Search

ERIC Educational Resources Information Center

Becker, Stefanie I.

2010-01-01

Current models of visual search assume that visual attention can be guided by tuning attention toward specific feature values (e.g., particular size, color) or by inhibiting the features of the irrelevant nontargets. The present study demonstrates that attention and eye movements can also be guided by a relational specification of how the target…

Suggested Curriculum and Planning Guide for Developing a Program in Auto Mechanics. Bulletin No. 49-174.

ERIC Educational Resources Information Center

Illinois State Board of Vocational Education and Rehabilitation, Springfield. Div. of Vocational and Technical Education.

The curriculum and planning guide has two objectives: to give the instructor, planner, and counselor a guide which furnishes current information on the trade, facility planning, equipment, and resource information for all levels of occupational instruction in the field of auto mechanics maintenance and repair; and to enable the student to be…

The Soviet Successor States and Eastern Europe. Teachers' Guide. Revised.

ERIC Educational Resources Information Center

Indiana Univ., Bloomington. Russian and East European Inst.

This document is a guide to provide teachers and curriculum consultants with an up to date overview of the histories, cultures, and current issues concerning the region of the former Soviet Union and Eastern Europe. It is not intended as an in depth study of the area or people. The guide is divided into two parts. The first discusses the Soviet…

On Multiple Reconnection X-lines and Tripolar Perturbations of Strong Guide Magnetic Fields

NASA Astrophysics Data System (ADS)

Eriksson, S.; Lapenta, G.; Newman, D. L.; Phan, T. D.; Gosling, J. T.; Lavraud, B.; Khotyaintsev, Yu. V.; Carr, C. M.; Markidis, S.; Goldman, M. V.

2015-05-01

We report new multi-spacecraft Cluster observations of tripolar guide magnetic field perturbations at a solar wind reconnection exhaust in the presence of a guide field BM which is almost four times as strong as the reversing field BL. The novel tripolar field consists of two narrow regions of depressed BM, with an observed 7%-14% ΔBM magnitude relative to the external field, which are found adjacent to a wide region of enhanced BM within the exhaust. A stronger reversing field is associated with each BM depression. A kinetic reconnection simulation for realistic solar wind conditions and the observed strong guide field reveals that tripolar magnetic fields preferentially form across current sheets in the presence of multiple X-lines as magnetic islands approach one another and merge into fewer and larger islands. The simulated ΔBM/ΔXN over the normal width ΔXN between a BM minimum and the edge of the external region agree with the normalized values observed by Cluster. We propose that a tripolar guide field perturbation may be used to identify candidate regions containing multiple X-lines and interacting magnetic islands at individual solar wind current sheets with a strong guide field.

Current status of the laser guide star adaptive optics system for Subaru Telescope

NASA Astrophysics Data System (ADS)

Hayano, Yutaka; Takami, Hideki; Guyon, Olivier; Oya, Shin; Hattori, Masayuki; Saito, Yoshihiko; Watanabe, Makoto; Murakami, Naoshi; Minowa, Yosuke; Ito, Meguru; Colley, Stephen; Eldred, Michael; Golota, Taras; Dinkins, Matthew; Kashikawa, Nobunari; Iye, Masanori

2008-07-01

The current status and recent results, since last SPIE conference at Orlando in 2006, for the laser guide star adaptive optics system for Subaru Telescope is presented. We had a first light using natural guide star and succeed to launch the sodium laser beam in October 2006. The achieved Strehl ratio on the 10th magnitude star was around 0.5 at K band. We confirmed that the full-width-half-maximum of the stellar point spread function is smaller than 0.1 arcsec even at the 0.9 micrometer wavelehgth. The size of the artificial guide star by the laser beam tuned at the wavelength of 589 nm was estimated to be 10 arcsec. The obtained blurred artificial guide star is caused by the wavefront error on the laser launching telescope. After the first light and first launch, we found that we need to modify and to fix the components, which are temporarily finished. Also components, which were postponed to fabricate after the first light, are required to build newly. All components used by the natural guide star adaptive optics system are finalized recently and we are ready to go on the sky. Next engineering observation is scheduled in August, 2008.

Kent County Health Department: Using an Agency Strategic Plan to Drive Improvement.

PubMed

Saari, Chelsey K

The Kent County Health Department (KCHD) was accredited by the Public Health Accreditation Board (PHAB) in September 2014. Although Michigan has had a state-level accreditation process for local health departments since the late 1990s, the PHAB accreditation process presented a unique opportunity for KCHD to build on successes achieved through state accreditation and enhance performance in all areas of KCHD programs, services, and operations. PHAB's standards, measures, and peer-review process provided a standardized and structured way to identify meaningful opportunities for improvement and to plan and implement strategies for enhanced performance and established a platform for being recognized nationally as a high-performing local health department. The current case report highlights the way in which KCHD has developed and implemented its strategic plan to guide efforts aimed at addressing gaps identified through the accreditation process and to drive overall improvement within our agency.

High pressure processing and its application to the challenge of virus-contaminated foods.

PubMed

Kingsley, David H

2013-03-01

High pressure processing (HPP) is an increasingly popular non-thermal food processing technology. Study of HPP's potential to inactivate foodborne viruses has defined general pressure levels required to inactivate hepatitis A virus, norovirus surrogates, and human norovirus itself within foods such as shellfish and produce. The sensitivity of a number of different picornaviruses to HPP is variable. Experiments suggest that HPP inactivates viruses via denaturation of capsid proteins which render the virus incapable of binding to its receptor on the surface of its host cell. Beyond the primary consideration of treatment pressure level, the effects of extending treatment times, temperature of initial pressure application, and matrix composition have been identified as critical parameters for designing HPP inactivation strategies. Research described here can serve as a preliminary guide to whether a current commercial process could be effective against HuNoV or HAV.

76 FR 31467 - Guide Concerning Fuel Economy Advertising for New Automobiles

Federal Register 2010, 2011, 2012, 2013, 2014

2011-06-01

...The Federal Trade Commission (``FTC'' or ``Commission'') gives notice that it is postponing any amendments to its Guide Concerning Fuel Economy Advertising for New Automobiles (``Fuel Economy Guide'' or ``Guide'') pending completion of ongoing review by the Environmental Protection Agency (``EPA'') and the National Highway Traffic Safety Administration (``NHTSA'') of current fuel economy labeling requirements and the Commission's accelerated regulatory review of its own Labeling Requirements for Alternative Fuels and Alternative Fueled Vehicles Rule (``Alternative Fuels Rule'').

Preliminary research on overmoded high-power millimeter-wave Cerenkov generator with dual-cavity reflector in low guiding magnetic field

NASA Astrophysics Data System (ADS)

Ye, Hu; Chen, Changhua; Ning, Hui; Tan, Weibing; Teng, Yan; Shi, Yanchao; Wu, Ping; Song, Zhimin; Cao, Yibing; Du, Zhaoyu

2015-12-01

This paper presents preliminary research on a V-band overmoded Cerenkov generator with dual-cavity reflector operating in a low guiding magnetic field. It is found that the fluctuation of the electron envelope in the low guiding magnetic field can be predicted using an equivalent coaxial model of a foilless diode, and a dual-cavity reflector based on the model matching method can provide strong reflection at the front end of the overmoded structures so that any microwave power that leaks into the diode region can be effectively suppressed. Numerical simulations indicate that the control of the beam envelope and the use of the dual-cavity reflector ease generator operation in the low guiding magnetic field. In the experimental research, the fluctuation of the annular electron beam with the outer radius of 7.5 mm measures approximately 0.7 mm, which is in good agreement with the theoretical results. The disturbance caused by power leaking from the overmoded slow wave structure is eliminated by the dual-cavity reflector. With accurate fabrication and assembly processes, an operating frequency of 61.6 GHz is attained by the fifth harmonic heterodyne method, and the output power is measured to be approximately 123 MW by the far-field measurement method at a diode voltage of 445 kV, a beam current of 4.45 kA, and under a guiding magnetic field of 1.45 T. The output mode is measured using an array of neon flash bulbs, and the pulse shortening phenomenon is both observed and analyzed.

E-learning process maturity level: a conceptual framework

NASA Astrophysics Data System (ADS)

Rahmah, A.; Santoso, H. B.; Hasibuan, Z. A.

2018-03-01

ICT advancement is a sure thing with the impact influencing many domains, including learning in both formal and informal situations. It leads to a new mindset that we should not only utilize the given ICT to support the learning process, but also improve it gradually involving a lot of factors. These phenomenon is called e-learning process evolution. Accordingly, this study attempts to explore maturity level concept to provide the improvement direction gradually and progression monitoring for the individual e-learning process. Extensive literature review, observation, and forming constructs are conducted to develop a conceptual framework for e-learning process maturity level. The conceptual framework consists of learner, e-learning process, continuous improvement, evolution of e-learning process, technology, and learning objectives. Whilst, evolution of e-learning process depicted as current versus expected conditions of e-learning process maturity level. The study concludes that from the e-learning process maturity level conceptual framework, it may guide the evolution roadmap for e-learning process, accelerate the evolution, and decrease the negative impact of ICT. The conceptual framework will be verified and tested in the future study.

Guiding health promotion efforts with urban Inuit: a community-specific perspective on health information sources and dissemination strategies.

PubMed

McShane, Kelly E; Smylie, Janet K; Hastings, Paul D; Martin, Carmel M

2006-01-01

To develop a community-specific perspective of health information sources and dissemination strategies of urban Inuit to better guide health promotion efforts. Through a collaborative partnership with the Tungasuvvingat Inuit Family Resource Centre, a series of key informant interviews and focus groups were conducted to gather information on specific sources of health information, strategies of health information dissemination, and overall themes in health information processes. Distinct patterns of health information sources and dissemination strategies emerged from the data. Major themes included: the importance of visual learning, community Elders, and cultural interpreters; community cohesion; and the Inuit and non-Inuit distinction. The core sources of health information are family members and sources from within the Inuit community. The principal dissemination strategy for health information was direct communication, either through one-on-one interactions or in groups. This community-specific perspective of health information sources and dissemination strategies shows substantial differences from current mainstream models of health promotion and knowledge translation. Health promotion efforts need to acknowledge the distinct health information processes of this community, and should strive to integrate existing health information sources and strategies of dissemination with those of the community.

Omics-based biomarkers: current status and potential use in the clinic.

PubMed

Quezada, Héctor; Guzmán-Ortiz, Ana Laura; Díaz-Sánchez, Hugo; Valle-Rios, Ricardo; Aguirre-Hernández, Jesús

In recent years, the use of high-throughput omics technologies has led to the rapid discovery of many candidate biomarkers. However, few of them have made the transition to the clinic. In this review, the promise of omics technologies to contribute to the process of biomarker development is described. An overview of the current state in this area is presented with examples of genomics, proteomics, transcriptomics, metabolomics and microbiomics biomarkers in the field of oncology, along with some proposed strategies to accelerate their validation and translation to improve the care of patients with neoplasms. The inherent complexity underlying neoplasms combined with the requirement of developing well-designed biomarker discovery processes based on omics technologies present a challenge for the effective development of biomarkers that may be useful in guiding therapies, addressing disease risks, and predicting clinical outcomes. Copyright © 2017 Hospital Infantil de México Federico Gómez. Publicado por Masson Doyma México S.A. All rights reserved.

The Gut Microbiota, Food Science, and Human Nutrition: A Timely Marriage.

PubMed

Barratt, Michael J; Lebrilla, Carlito; Shapiro, Howard-Yana; Gordon, Jeffrey I

2017-08-09

Analytic advances are enabling more precise definitions of the molecular composition of key food staples incorporated into contemporary diets and how the nutrient landscapes of these staples vary as a function of cultivar and food processing methods. This knowledge, combined with insights about the interrelationship between consumer microbiota configurations and biotransformation of food ingredients, should have a number of effects on agriculture, food production, and strategies for improving the nutritional value of foods and health status. These effects include decision-making about which cultivars of current or future food staples to incorporate into existing and future food systems, and which components of waste streams from current or future food manufacturing processes have nutritional value that is worth capturing. They can also guide which technologies should be applied, or need to be developed, to produce foods that support efficient microbial biotransformation of their ingredients into metabolic products that sustain health. Copyright © 2017 Elsevier Inc. All rights reserved.

Computational Analysis of Mouse piRNA Sequence and Biogenesis

PubMed Central

Betel, Doron; Sheridan, Robert; Marks, Debora S; Sander, Chris

2007-01-01

The recent discovery of a new class of 30-nucleotide long RNAs in mammalian testes, called PIWI-interacting RNA (piRNA), with similarities to microRNAs and repeat-associated small interfering RNAs (rasiRNAs), has raised puzzling questions regarding their biogenesis and function. We report a comparative analysis of currently available piRNA sequence data from the pachytene stage of mouse spermatogenesis that sheds light on their sequence diversity and mechanism of biogenesis. We conclude that (i) there are at least four times as many piRNAs in mouse testes than currently known; (ii) piRNAs, which originate from long precursor transcripts, are generated by quasi-random enzymatic processing that is guided by a weak sequence signature at the piRNA 5′ends resulting in a large number of distinct sequences; and (iii) many of the piRNA clusters contain inverted repeats segments capable of forming double-strand RNA fold-back segments that may initiate piRNA processing analogous to transposon silencing. PMID:17997596

Automated Data Assimilation and Flight Planning for Multi-Platform Observation Missions

NASA Technical Reports Server (NTRS)

Oza, Nikunj; Morris, Robert A.; Strawa, Anthony; Kurklu, Elif; Keely, Leslie

2008-01-01

This is a progress report on an effort in which our goal is to demonstrate the effectiveness of automated data mining and planning for the daily management of Earth Science missions. Currently, data mining and machine learning technologies are being used by scientists at research labs for validating Earth science models. However, few if any of these advanced techniques are currently being integrated into daily mission operations. Consequently, there are significant gaps in the knowledge that can be derived from the models and data that are used each day for guiding mission activities. The result can be sub-optimal observation plans, lack of useful data, and wasteful use of resources. Recent advances in data mining, machine learning, and planning make it feasible to migrate these technologies into the daily mission planning cycle. We describe the design of a closed loop system for data acquisition, processing, and flight planning that integrates the results of machine learning into the flight planning process.

Earth view: A business guide to orbital remote sensing

NASA Technical Reports Server (NTRS)

Bishop, Peter C.

1990-01-01

The following subject areas are covered: Earth view - a guide to orbital remote sensing; current orbital remote sensing systems (LANDSAT, SPOT image, MOS-1, Soviet remote sensing systems); remote sensing satellite; and remote sensing organizations.

Florida public transportation anti-terrorism resource guide

DOT National Transportation Integrated Search

2001-10-01

The Center for Urban Transportation (CUTR) at the University of South Florida (USF) assembled this guide to provide public transit agencies in Florida with information on current resources available to assist them with improving system security and g...

MITLL Silicon Integrated Photonics Process: Design Guide

DTIC Science & Technology

2015-07-31

Silicon Integrated Photonics Process Comprehensive Design Guide 16  Deep Etch for Fiber Coupling (DEEP_ETCH...facets for fiber coupling. Standard design layers for each process are defined in Section 3, but other options can be made available. Notes on...a silicon thinning process that can create very low loss waveguides (and which better suppresses back scatter and, therefore, resonance splitting in

Applying Human ADAR1p110 and ADAR1p150 for Site-Directed RNA Editing-G/C Substitution Stabilizes GuideRNAs against Editing.

PubMed

Heep, Madeleine; Mach, Pia; Reautschnig, Philipp; Wettengel, Jacqueline; Stafforst, Thorsten

2017-01-14

Site-directed RNA editing is an approach to reprogram genetic information at the RNA level. We recently introduced a novel guideRNA that allows for the recruitment of human ADAR2 to manipulate genetic information. Here, we show that the current guideRNA design is already able to recruit another human deaminase, ADAR1, in both isoforms, p110 and p150. However, further optimization seems necessary as the current design is less efficient for ADAR1 isoforms. Furthermore, we describe hotspots at which the guideRNA itself is edited and show a way to circumvent this auto-editing without losing editing efficiency at the target. Both findings are important for the advancement of site-directed RNA editing as a tool in basic biology or as a platform for therapeutic editing.

Self-Study and Evaluation Guide/1968 Edition. Section D-2B: Orientation on Mobility Services. (Dog Guide Program Only).

ERIC Educational Resources Information Center

National Accreditation Council for Agencies Serving the Blind and Visually Handicapped, New York, NY.

This self-study and evaluation guide on orientation and mobility services (dog guide program emphasis) is one of 28 guides designed for organizations undertaking a self-study as part of the process for accreditation from the National Accreditation Council (NAC) for agencies serving the blind and visually handicapped. Provided are lists of…

Coastal Processes and Erosion, Student Guide and Teacher Guide. OEAGLS Investigation 7.

ERIC Educational Resources Information Center

Kennedy, Beth A.; Fortner, Rosanne W.

This investigation focuses on the major erosional forces affecting the shoreline which cause it to wear away and build up. The types of devices that protect the shoreline are also discussed. The investigation is presented in the form of a teachers' guide and a students' guide, both of which are included. In the teachers' guide, an overview of the…

User's Guide for ERB 7 SEFDT. Volume 1: User's Guide. Volume 2: Quality Control Report, Year 1

NASA Technical Reports Server (NTRS)

Ray, S. N.; Tighe, R. J.; Scherrer, S. A.

1984-01-01

The Nimbus-7 ERB SEFDT Data User's Guide is presented. The guide consists of four subsections which describe: (1) the scope of the data User's Guide; (2) the background on Nimbus-7 Spacecraft and the ERB experiment; (3) the SEFDT data product and processing scenario; and (4) other related products and documents.

British Columbia Transfer Guide, 2002-2003: The Official Guide to Post-Secondary Credit Transfer in B.C.

ERIC Educational Resources Information Center

British Columbia Council on Admissions and Transfer, Vancouver.

This transfer 2002-2003 transfer guide for the province of British Columbia offers detailed information for college transfer students. The guide documents provincial transfer policy and process, as well as offering specific transfer information for some institutions. It is suggested that it be used in conjunction with the Online Transfer Guide and…

Student Analysis of Handout Development based on Guided Discovery Method in Process Evaluation and Learning Outcomes of Biology

NASA Astrophysics Data System (ADS)

Nerita, S.; Maizeli, A.; Afza, A.

2017-09-01

Process Evaluation and Learning Outcomes of Biology subjects discusses the evaluation process in learning and application of designed and processed learning outcomes. Some problems found during this subject was the student difficult to understand the subject and the subject unavailability of learning resources that can guide and make students independent study. So, it necessary to develop a learning resource that can make active students to think and to make decisions with the guidance of the lecturer. The purpose of this study is to produce handout based on guided discovery method that match the needs of students. The research was done by using 4-D models and limited to define phase that is student requirement analysis. Data obtained from the questionnaire and analyzed descriptively. The results showed that the average requirement of students was 91,43%. Can be concluded that students need a handout based on guided discovery method in the learning process.

WAVE2-Abi2 complex controls growth cone activity and regulates the multipolar-bipolar transition as well as the initiation of glia-guided migration.

PubMed

Xie, Min-Jue; Yagi, Hideshi; Kuroda, Kazuki; Wang, Chen-Chi; Komada, Munekazu; Zhao, Hong; Sakakibara, Akira; Miyata, Takaki; Nagata, Koh-Ichi; Oka, Yuichiro; Iguchi, Tokuichi; Sato, Makoto

2013-06-01

Glia-guided migration (glia-guided locomotion) during radial migration is a characteristic yet unique mode of migration. In this process, the directionality of migration is predetermined by glial processes and not by growth cones. Prior to the initiation of glia-guided migration, migrating neurons transform from multipolar to bipolar, but the molecular mechanisms underlying this multipolar-bipolar transition and the commencement of glia-guided migration are not fully understood. Here, we demonstrate that the multipolar-bipolar transition is not solely a cell autonomous event; instead, the interaction of growth cones with glial processes plays an essential role. Time-lapse imaging with lattice assays reveals the importance of vigorously active growth cones in searching for appropriate glial scaffolds, completing the transition, and initiating glia-guided migration. These growth cone activities are regulated by Abl kinase and Cdk5 via WAVE2-Abi2 through the phosphorylation of tyrosine 150 and serine 137 of WAVE2. Neurons that do not display such growth cone activities are mispositioned in a more superficial location in the neocortex, suggesting the significance of growth cones for the final location of the neurons. This process occurs in spite of the "inside-out" principle in which later-born neurons are situated more superficially.

Expanding Library Services and Instruction Through LibGuides.

PubMed

Ream, Tim; Parker-Kelly, Darlene

2016-01-01

Beginning in 2012, the Charles R. Drew University (CDU) Health Sciences Library used LibGuides in a number of innovative ways. Librarians constructed e-book databases, in-depth tutorials on technology-related topics, and web pages highlighting special events. To assess similar LibGuides innovation, CDU librarians developed an eight-question survey distributed to health sciences and hospital libraries throughout Southern California and Arizona. Results showed that libraries used LibGuides primarily to deliver access to online resources and to provide supplementary materials supporting instruction. Responses also revealed that many libraries had not yet adopted LibGuides. These findings were analyzed and compared to past and current LibGuides design at CDU.

A Guide to Pathways through the Pre-Five Quality Process.

ERIC Educational Resources Information Center

Strathclyde Regional Council, Glasgow (Scotland).

This guide describes a quality process for external and internal evaluation of the elementary school education department. The term "pathway" is used to define routes through the quality process that describe any school administrative activity in terms of the indicators and examples of good practice. There are five pathways: process…

Aerobic Digestion. Biological Treatment Process Control. Instructor's Guide.

ERIC Educational Resources Information Center

Klopping, Paul H.

This unit on aerobic sludge digestion covers the theory of the process, system components, factors that affect the process performance, standard operational concerns, indicators of steady-state operations, and operational problems. The instructor's guide includes: (1) an overview of the unit; (2) lesson plan; (3) lecture outline (keyed to a set of…

Manufacturing Materials and Processes. Grade 11-12. Course #8165 (Semester). Technology Education Course Guide. Industrial Arts/Technology Education.

ERIC Educational Resources Information Center

North Carolina State Dept. of Public Instruction, Raleigh. Div. of Vocational Education.

This guide is intended for use in teaching an introductory course in manufacturing materials and processes. The course centers around four basic materials--metallics, polymers, ceramics, and composites--and seven manufacturing processes--casting, forming, molding, separating, conditioning, assembling, and finishing. Concepts and classifications of…

Manufacturing Planning Guide

NASA Technical Reports Server (NTRS)

Waid, Michael

2011-01-01

Manufacturing process, milestones and inputs are unknowns to first-time users of the manufacturing facilities. The Manufacturing Planning Guide aids in establishing expectations for both NASA and non-NASA facility customers. The potential audience for this guide includes both internal and commercial spaceflight hardware/software developers. It is intended to assist their project engineering personnel in manufacturing planning and execution. Material covered includes a roadmap of the manufacturing process, roles and responsibilities of facility and user, major milestones, facility capabilities, and inputs required by the facility. Samples of deliverables, products, and inputs necessary to define test scope, cost, and schedule are included as an appendix to the guide.

Unfolding the chaperone story

PubMed Central

Hartl, F. Ulrich

2017-01-01

Protein folding in the cell was originally assumed to be a spontaneous process, based on Anfinsen’s discovery that purified proteins can fold on their own after removal from denaturant. Consequently cell biologists showed little interest in the protein folding process. This changed only in the mid and late 1980s, when the chaperone story began to unfold. As a result, we now know that in vivo, protein folding requires assistance by a complex machinery of molecular chaperones. To ensure efficient folding, members of different chaperone classes receive the nascent protein chain emerging from the ribosome and guide it along an ordered pathway toward the native state. I was fortunate to contribute to these developments early on. In this short essay, I will describe some of the critical steps leading to the current concept of protein folding as a highly organized cellular process. PMID:29084909

Predictive and Prognostic Models: Implications for Healthcare Decision-Making in a Modern Recession

PubMed Central

Vogenberg, F. Randy

2009-01-01

Various modeling tools have been developed to address the lack of standardized processes that incorporate the perspectives of all healthcare stakeholders. Such models can assist in the decision-making process aimed at achieving specific clinical outcomes, as well as guide the allocation of healthcare resources and reduce costs. The current efforts in Congress to change the way healthcare is financed, reimbursed, and delivered have rendered the incorporation of modeling tools into the clinical decision-making all the more important. Prognostic and predictive models are particularly relevant to healthcare, particularly in the clinical decision-making, with implications for payers, patients, and providers. The use of these models is likely to increase, as providers and patients seek to improve their clinical decision process to achieve better outcomes, while reducing overall healthcare costs. PMID:25126292

A generalized framework for nucleosynthesis calculations

NASA Astrophysics Data System (ADS)

Sprouse, Trevor; Mumpower, Matthew; Aprahamian, Ani

2014-09-01

Simulating astrophysical events is a difficult process, requiring a detailed pairing of knowledge from both astrophysics and nuclear physics. Astrophysics guides the thermodynamic evolution of an astrophysical event. We present a nucleosynthesis framework written in Fortran that combines as inputs a thermodynamic evolution and nuclear data to time evolve the abundances of nuclear species. Through our coding practices, we have emphasized the applicability of our framework to any astrophysical event, including those involving nuclear fission. Because these calculations are often very complicated, our framework dynamically optimizes itself based on the conditions at each time step in order to greatly minimize total computation time. To highlight the power of this new approach, we demonstrate the use of our framework to simulate both Big Bang nucleosynthesis and r-process nucleosynthesis with speeds competitive with current solutions dedicated to either process alone.

Tunable Light-Guide Image Processing Snapshot Spectrometer (TuLIPSS) for Earth and Moon Observations

NASA Astrophysics Data System (ADS)

Tkaczyk, T. S.; Alexander, D.; Luvall, J. C.; Wang, Y.; Dwight, J. G.; Pawlowsk, M. E.; Howell, B.; Tatum, P. F.; Stoian, R.-I.; Cheng, S.; Daou, A.

2018-02-01

A tunable light-guide image processing snapshot spectrometer (TuLIPSS) for Earth science research and observation is being developed through a NASA instrument incubator project with Rice University and Marshall Space Flight Center.

KSC-01pp0246

NASA Image and Video Library

2001-02-03

In the Space Station Processing Facility, workers help guide the overhead crane as it lifts the Multi-Purpose Logistics Module Donatello out of the shipping container. In the SSPF, Donatello will undergo processing by the payload test team, including integrated electrical tests with other Station elements in the SSPF, leak tests, electrical and software compatibility tests with the Space Shuttle (using the Cargo Integrated Test equipment) and an Interface Verification Test once the module is installed in the Space Shuttle’s payload bay at the launch pad. The most significant mechanical task to be performed on Donatello in the SSPF is the installation and outfitting of the racks for carrying the various experiments and cargo. Donatello will be launched on mission STS-130, currently planned for September 2004

KSC-01pp0247

NASA Image and Video Library

2001-02-03

In the Space Station Processing Facility, workers help guide the Multi-Purpose Logistics Module Donatello as it moves the length of the SSPF toward a workstand. In the SSPF, Donatello will undergo processing by the payload test team, including integrated electrical tests with other Station elements in the SSPF, leak tests, electrical and software compatibility tests with the Space Shuttle (using the Cargo Integrated Test equipment) and an Interface Verification Test once the module is installed in the Space Shuttle’s payload bay at the launch pad. The most significant mechanical task to be performed on Donatello in the SSPF is the installation and outfitting of the racks for carrying the various experiments and cargo. Donatello will be launched on mission STS-130, currently planned for September 2004

Role of motor vehicle emission controls in state implementation plans

DOT National Transportation Integrated Search

2000-01-01

The American Association of State Highway and Transportation Official's (AASHTO) Guide for the Design of Pavement Structures is widely used in the design of new and rehabilitated highway pavements. However, the current Design Guide, published in 1993...

Traffic and data preparation for AASHTO MEPDG analysis and designs.

DOT National Transportation Integrated Search

2011-10-01

"The Mechanistic Empirical Pavement Design Guide (MEPDG) and the : subsequent AASHTO product DARWin-ME are signifi cant advancements in : pavement design. However, they are substantially more complex than the : 1993 AASHTO Guide, which is currently u...

Astaxanthin-Producing Green Microalga Haematococcus pluvialis: From Single Cell to High Value Commercial Products

PubMed Central

Shah, Md. Mahfuzur R.; Liang, Yuanmei; Cheng, Jay J.; Daroch, Maurycy

2016-01-01

Many species of microalgae have been used as source of nutrient rich food, feed, and health promoting compounds. Among the commercially important microalgae, Haematococcus pluvialis is the richest source of natural astaxanthin which is considered as “super anti-oxidant.” Natural astaxanthin produced by H. pluvialis has significantly greater antioxidant capacity than the synthetic one. Astaxanthin has important applications in the nutraceuticals, cosmetics, food, and aquaculture industries. It is now evident that, astaxanthin can significantly reduce free radicals and oxidative stress and help human body maintain a healthy state. With extraordinary potency and increase in demand, astaxanthin is one of the high-value microalgal products of the future.This comprehensive review summarizes the most important aspects of the biology, biochemical composition, biosynthesis, and astaxanthin accumulation in the cells of H. pluvialis and its wide range of applications for humans and animals. In this paper, important and recent developments ranging from cultivation, harvest and postharvest bio-processing technologies to metabolic control and genetic engineering are reviewed in detail, focusing on biomass and astaxanthin production from this biotechnologically important microalga. Simultaneously, critical bottlenecks and major challenges in commercial scale production; current and prospective global market of H. pluvialis derived astaxanthin are also presented in a critical manner. A new biorefinery concept for H. pluvialis has been also suggested to guide toward economically sustainable approach for microalgae cultivation and processing. This report could serve as a useful guide to present current status of knowledge in the field and highlight key areas for future development of H. pluvialis astaxanthin technology and its large scale commercial implementation. PMID:27200009

VOLTTRON 3.0: User Guide

DOE Office of Scientific and Technical Information (OSTI.GOV)

Lutes, Robert G.; Haack, Jereme N.; Katipamula, Srinivas

This document is a user guide for the deployment of the transactional network platform and agent/application development within VOLTTRON. The intent of this user guide is to provide a description of the functionality of the transactional network platform. This document describes how to deploy the platform, including installation, use, guidance, and limitations. It also describes how additional features can be added to enhance its current functionality.

Finding Good Child Care: The Essential Questions To Ask When Seeking Quality Care for Your Child. CCAC Information Guide 19.

ERIC Educational Resources Information Center

Child Care Action Campaign, New York, NY.

This Child Care Action Campaign (CCAC) Information Guide focuses on questions for parents to ask when looking for the right childcare program. The guide provides a checklist for parents to use when evaluating potential or currently used childcare programs. By sharing and discussing the checklist with caregivers, parents and caregivers can work…

Guide d'enseignement du francais au secondaire. Volet I: Comprehension ecrite. Immersion (Teaching Guide for French at the Secondary Level. Part I: Reading Comprehension. Immersion).

ERIC Educational Resources Information Center

Leduc, Denise

This guide to secondary school French reading instruction addresses a variety of general and specific instructional issues. An introductory chapter discusses program objectives, minimum program requirements, and the population to be taught. The second chapter looks at theoretical aspects of the development of reading ability: current thoughts on…

VOLTTRON 2.0: User Guide

DOE Office of Scientific and Technical Information (OSTI.GOV)

Lutes, Robert G.; Haack, Jereme N.; Katipamula, Srinivas

This document is a user guide for the deployment of the transactional network platform and agent/application development within VOLTTRON. The intent of this user guide is to provide a description of the functionality of the transactional network platform. This document describes how to deploy the platform, including installation, use, guidance, and limitations. It also describes how additional features can be added to enhance its current functionality.

A process-model based approach to prospective memory impairment in Parkinson's disease.

PubMed

Kliegel, Matthias; Altgassen, Mareike; Hering, Alexandra; Rose, Nathan S

2011-07-01

The present review discusses the current state of research on the clinical neuropsychology of prospective memory in Parkinson's disease. To do so the paper is divided in two sections. In the first section, we briefly outline key features of the (partly implicit) rationale underlying the available literature on the clinical neuropsychology of prospective memory. Here, we present a conceptual model that guides our approach to the clinical neuropsychology of prospective memory in general and to the effects of Parkinson's disease on prospective memory in particular. In the second section, we use this model to guide our review of the available literature and suggest some open issues and future directions motivated by previous findings and the proposed conceptual model. The review suggests that certain phases of the prospective memory process (intention formation und initiation) are particularly impaired by Parkinson's disease. In addition, it is argued that prospective memory may be preserved when tasks involve specific features (e.g., focal cues) that reduce the need for strategic monitoring processes. In terms of suggestions for future directions, it is noted that intervention studies are needed which target the specific phases of the prospective memory process that are impaired in Parkinson's disease, such as planning interventions. Moreover, it is proposed that prospective memory deficits in Parkinson's disease should be explored in the context of a general impairment in the ability to form an intention and plan or coordinate an appropriate series of actions. Copyright © 2011 Elsevier Ltd. All rights reserved.

Translational Medicine Guide transforms drug development processes: the recent Merck experience.

PubMed

Dolgos, Hugues; Trusheim, Mark; Gross, Dietmar; Halle, Joern-Peter; Ogden, Janet; Osterwalder, Bruno; Sedman, Ewen; Rossetti, Luciano

2016-03-01

Merck is implementing a question-based Translational Medicine Guide (TxM Guide) beginning as early as lead optimization into its stage-gate drug development process. Initial experiences with the TxM Guide, which is embedded into an integrated development plan tailored to each development program, demonstrated opportunities to improve target understanding, dose setting (i.e., therapeutic index), and patient subpopulation selection with more robust and relevant early human-based evidence, and increased use of biomarkers and simulations. The TxM Guide is also helping improve organizational learning, costs, and governance. It has also shown the need for stronger external resources for validating biomarkers, demonstrating clinical utility, tracking natural disease history, and biobanking. Copyright © 2016 The Authors. Published by Elsevier Ltd.. All rights reserved.

Section 4 User Guide – Primary Support

EPA Pesticide Factsheets

This document presents the user guide for the Office of Pollution Prevention and Toxics (OPPT) Section 4 application submission process. This document is the user guide for the Primary Support user of the Section 4 tool.

HSM implementation guide for managers.

DOT National Transportation Integrated Search

2011-09-01

This guide is intended for managers of departments of transportation (DOT) charged with leading and managing agency programs impacting the project development process and safety programs. This guide is based on lessons learned from early adopters of ...

Electron diffusion region during magnetopause reconnection with an intermediate guide field: Magnetospheric multiscale observations

NASA Astrophysics Data System (ADS)

Chen, L.-J.; Hesse, M.; Wang, S.; Gershman, D.; Ergun, R. E.; Burch, J.; Bessho, N.; Torbert, R. B.; Giles, B.; Webster, J.; Pollock, C.; Dorelli, J.; Moore, T.; Paterson, W.; Lavraud, B.; Strangeway, R.; Russell, C.; Khotyaintsev, Y.; Lindqvist, P.-A.; Avanov, L.

2017-05-01

An electron diffusion region (EDR) in magnetic reconnection with a guide magnetic field approximately 0.2 times the reconnecting component is encountered by the four Magnetospheric Multiscale spacecraft at the Earth's magnetopause. The distinct substructures in the EDR on both sides of the reconnecting current sheet are visualized with electron distribution functions that are 2 orders of magnitude higher cadence than ever achieved to enable the following new findings: (1) Motion of the demagnetized electrons plays an important role to sustain the reconnection current and contributes to the dissipation due to the nonideal electric field, (2) the finite guide field dominates over the Hall magnetic field in an electron-scale region in the exhaust and modifies the electron flow dynamics in the EDR, (3) the reconnection current is in part carried by inflowing field-aligned electrons in the magnetosphere part of the EDR, and (4) the reconnection electric field measured by multiple spacecraft is uniform over at least eight electron skin depths and corresponds to a reconnection rate of approximately 0.1. The observations establish the first look at the structure of the EDR under a weak but not negligible guide field.

Numerical simulation of dynamics of brushless dc motors for aerospace and other applications. Volume 2: User's guide to computer EMA model

NASA Technical Reports Server (NTRS)

Demerdash, N. A. O.; Nehl, T. W.

1979-01-01

A description and user's guide of the computer program developed to simulate the dynamics of an electromechanical actuator for aerospace applications are presented. The effects of the stator phase currents on the permanent magnets of the rotor are examined. The voltage and current waveforms present in the power conditioner network during the motoring, regenerative braking, and plugging modes of operation are presented and discussed.

Evaluation of liver fibrosis: “Something old, something new…”

PubMed Central

Almpanis, Zannis; Demonakou, Maria; Tiniakos, Dina

2016-01-01

Hepatic fibrogenesis may gradually result to cirrhosis due to the accumulation of extracellular matrix components as a response to liver injury. Thus, therapeutic decisions in chronic liver disease, regardless of the cause, should first and foremost be guided by an accurate quantification of hepatic fibrosis. Detection and assessment of the extent of hepatic fibrosis represent a challenge in modern Hepatology. Although traditional histological staging systems remain the “best standard”, they are not able to quantify liver fibrosis as a dynamic process and may not accurately substage cirrhosis. This review aims to compare the currently used non-invasive methods of measuring liver fibrosis and provide an update in current tissue-based digital techniques developed for this purpose, that may prove of value in daily clinical practice. PMID:27708509

Research on the laser angle deception jamming technology of laser countermeasure

NASA Astrophysics Data System (ADS)

Ma, Shi-wei; Chen, Wen-jian; Gao, Wei; Duan, Yuan-yuan

2015-10-01

In recent years , laser guided weapons behave very well at destroying the military goals in the local wars, the single-shot probability, effective range and hitting precision getting better. And the semi-active laser guided weapons are the most widely used laser guided weapons. In order to improve the viability and protect important military goals, it's necessary to study the technology to against the semi-active guided weapons. This paper studies the working principle, the advantages and disadvantages of the semi-active guided weapons at first, and analyze the possibility of laser angle deception jamming system working. Then it analyzes the working principle and process of laser angle deception jamming technology. Finally it designs a half-real simulation system of laser angle deception jamming, which consists of semi-active laser guided weapons simulation system and laser angle deception jamming system. The simulation system demonstrates the working process of the laser angle deception jamming system. This paper provides fundamental base for the research on the countermeasure technology of semi-active laser guided weapons.

Applications of Panoramic Images: from 720° Panorama to Interior 3d Models of Augmented Reality

NASA Astrophysics Data System (ADS)

Lee, I.-C.; Tsai, F.

2015-05-01

A series of panoramic images are usually used to generate a 720° panorama image. Although panoramic images are typically used for establishing tour guiding systems, in this research, we demonstrate the potential of using panoramic images acquired from multiple sites to create not only 720° panorama, but also three-dimensional (3D) point clouds and 3D indoor models. Since 3D modeling is one of the goals of this research, the location of the panoramic sites needed to be carefully planned in order to maintain a robust result for close-range photogrammetry. After the images are acquired, panoramic images are processed into 720° panoramas, and these panoramas which can be used directly as panorama guiding systems or other applications. In addition to these straightforward applications, interior orientation parameters can also be estimated while generating 720° panorama. These parameters are focal length, principle point, and lens radial distortion. The panoramic images can then be processed with closerange photogrammetry procedures to extract the exterior orientation parameters and generate 3D point clouds. In this research, VisaulSFM, a structure from motion software is used to estimate the exterior orientation, and CMVS toolkit is used to generate 3D point clouds. Next, the 3D point clouds are used as references to create building interior models. In this research, Trimble Sketchup was used to build the model, and the 3D point cloud was added to the determining of locations of building objects using plane finding procedure. In the texturing process, the panorama images are used as the data source for creating model textures. This 3D indoor model was used as an Augmented Reality model replacing a guide map or a floor plan commonly used in an on-line touring guide system. The 3D indoor model generating procedure has been utilized in two research projects: a cultural heritage site at Kinmen, and Taipei Main Station pedestrian zone guidance and navigation system. The results presented in this paper demonstrate the potential of using panoramic images to generate 3D point clouds and 3D models. However, it is currently a manual and labor-intensive process. A research is being carried out to Increase the degree of automation of these procedures.

Leader's Guide: Facilitating Inquiry in the Classroom.

ERIC Educational Resources Information Center

Newton, Fred E.

This is the leader's guide and training materials for conducting workshops on an instructional system which utilizes the process of inquiry. The guide is designed for leaders of these workshops and lists the leader's activities. It is organized according to the 18 major workshop experiences, referred to as subset. Each subset guide is organized…

Middle Level Leadership Handbook. National Leadership Camp Curriculum--Adviser's Guide.

ERIC Educational Resources Information Center

Jensen, Jacquie; And Others

This guide, designed to accompany the "Middle Level Leadership Handbook" student guide, is helpful in assisting student advisers in building student leaders and overseeing student organizations. The guide begins with a section on leadership that covers how to process a learning experience, organize beliefs, and form ideas on leadership.…

Planning and Resource Management in an Intelligent Automated Power Management System

NASA Technical Reports Server (NTRS)

Morris, Robert A.

1991-01-01

Power system management is a process of guiding a power system towards the objective of continuous supply of electrical power to a set of loads. Spacecraft power system management requires planning and scheduling, since electrical power is a scarce resource in space. The automation of power system management for future spacecraft has been recognized as an important R&D goal. Several automation technologies have emerged including the use of expert systems for automating human problem solving capabilities such as rule based expert system for fault diagnosis and load scheduling. It is questionable whether current generation expert system technology is applicable for power system management in space. The objective of the ADEPTS (ADvanced Electrical Power management Techniques for Space systems) is to study new techniques for power management automation. These techniques involve integrating current expert system technology with that of parallel and distributed computing, as well as a distributed, object-oriented approach to software design. The focus of the current study is the integration of new procedures for automatically planning and scheduling loads with procedures for performing fault diagnosis and control. The objective is the concurrent execution of both sets of tasks on separate transputer processors, thus adding parallelism to the overall management process.

Medial prefrontal serotonin in the rat is involved in goal-directed behaviour when affect guides decision making

PubMed Central

La Fors, Sabrina S. B. M.; Meerkerk, Dorie T. J.; Joosten, Ruud N. J. M. A.; Uylings, Harry B. M.; Feenstra, Matthijs G. P.

2007-01-01

Rationale Across species, serotonin (5-HT) depletion in the prefrontal cortex (PFC) has been shown to cause impaired performance on tests of cognitive flexibility and the processing of affective information (e.g. information with an ‘emotional’ content). While recent work has explored the specific role of the orbital PFC herein, the role of the medial PFC remains unclear. Objectives The aim of our current experiments was to study the role of medial PFC 5-HT in both the processing of affective information and reversal learning across stimulus modalities. Materials and methods To this end, we selectively destroyed 5-HT terminals in the medial PFC of male Wistar rats by means of local infusion of the toxin 5,7-dihydroxytryptamine. Both control and lesioned animals were tested in two reversal learning paradigms with either spatial or odour cues and an affective switch from non-preferred to preferred food rewards. Results Our results indicate that a pellet switch during reversal learning impaired performance in control animals but not in lesioned animals, independent of the stimulus modality. Conclusion These results indicate that lesioned animals are not guided in their behaviour by the affective value of the reward like intact animals and thus that medial prefrontal 5-HT is needed for affective processing in goal-directed behaviour. PMID:17874235

Convolutional neural network guided blue crab knuckle detection for autonomous crab meat picking machine

NASA Astrophysics Data System (ADS)

Wang, Dongyi; Vinson, Robert; Holmes, Maxwell; Seibel, Gary; Tao, Yang

2018-04-01

The Atlantic blue crab is among the highest-valued seafood found in the American Eastern Seaboard. Currently, the crab processing industry is highly dependent on manual labor. However, there is great potential for vision-guided intelligent machines to automate the meat picking process. Studies show that the back-fin knuckles are robust features containing information about a crab's size, orientation, and the position of the crab's meat compartments. Our studies also make it clear that detecting the knuckles reliably in images is challenging due to the knuckle's small size, anomalous shape, and similarity to joints in the legs and claws. An accurate and reliable computer vision algorithm was proposed to detect the crab's back-fin knuckles in digital images. Convolutional neural networks (CNNs) can localize rough knuckle positions with 97.67% accuracy, transforming a global detection problem into a local detection problem. Compared to the rough localization based on human experience or other machine learning classification methods, the CNN shows the best localization results. In the rough knuckle position, a k-means clustering method is able to further extract the exact knuckle positions based on the back-fin knuckle color features. The exact knuckle position can help us to generate a crab cutline in XY plane using a template matching method. This is a pioneering research project in crab image analysis and offers advanced machine intelligence for automated crab processing.

Building Statewide Infrastructure for the Academic Support of Students With Mild Traumatic Brain Injury.

PubMed

Gioia, Gerard A; Glang, Ann E; Hooper, Stephen R; Brown, Brenda Eagan

To focus attention on building statewide capacity to support students with mild traumatic brain injury (mTBI)/concussion. Consensus-building process with a multidisciplinary group of clinicians, researchers, policy makers, and state Department of Education personnel. The white paper presents the group's consensus on the essential components of a statewide educational infrastructure to support the management of students with mTBI. The nature and recovery process of mTBI are briefly described specifically with respect to its effects on school learning and performance. State and local policy considerations are then emphasized to promote implementation of a consistent process. Five key components to building a statewide infrastructure for students with mTBI are described including (1) definition and training of the interdisciplinary school team, (2) professional development of the school and medical communities, (3) identification, assessment, and progress monitoring protocols, (4) a flexible set of intervention strategies to accommodate students' recovery needs, and (5) systematized protocols for active communication among medical, school, and family team members. The need for a research to guide effective program implementation is stressed. This guiding framework strives to assist the development of support structures for recovering students with mTBI to optimize academic outcomes. Until more evidence is available on academic accommodations and other school-based supports, educational systems should follow current best practice guidelines.

Modeling tidal hydrodynamics of San Diego Bay, California

USGS Publications Warehouse

Wang, P.-F.; Cheng, R.T.; Richter, K.; Gross, E.S.; Sutton, D.; Gartner, J.W.

1998-01-01

In 1983, current data were collected by the National Oceanic and Atmospheric Administration using mechanical current meters. During 1992 through 1996, acoustic Doppler current profilers as well as mechanical current meters and tide gauges were used. These measurements not only document tides and tidal currents in San Diego Bay, but also provide independent data sets for model calibration and verification. A high resolution (100-m grid), depth-averaged, numerical hydrodynamic model has been implemented for San Diego Bay to describe essential tidal hydrodynamic processes in the bay. The model is calibrated using the 1983 data set and verified using the more recent 1992-1996 data. Discrepancies between model predictions and field data in beth model calibration and verification are on the order of the magnitude of uncertainties in the field data. The calibrated and verified numerical model has been used to quantify residence time and dilution and flushing of contaminant effluent into San Diego Bay. Furthermore, the numerical model has become an important research tool in ongoing hydrodynamic and water quality studies and in guiding future field data collection programs.

Transurethral ultrasound-guided laser-induced prostatectomy

NASA Astrophysics Data System (ADS)

Babayan, Richard K.; Roth, Robert A.

1991-07-01

A transurethral ultrasound-guided Nd:YAG laser delivery system has been developed for use as an alternative approach to the treatment of benign prostatic hyperplasia. The TULIP system has been extensively tested in canine models and is currently undergoing FDA trials in humans.

Bibliographic Guide to Mexican Federal Government Documents.

ERIC Educational Resources Information Center

Simoneau, Karin

This bibliographic guide covers federal-level documents from the legislative, executive, and judicial branches of the Mexican government. It includes bibliographies and catalogs, organization directories, serials and series currently published by government institutions, censuses, annual reports, congressional records, legal materials, and…

Business Mathematics Curriculum.

ERIC Educational Resources Information Center

EASTCONN Regional Educational Services Center, North Windham, CT.

This curriculum guide for teaching business mathematics in the Connecticut Vocational-Technical School System is based on the latest thinking of instructors in the field, suggestions from mathematics authorities, and current instructional approaches in education. The curriculum guide consists of six sections: (1) career relationships and…

A Guide for Developing Standard Operating Job Procedures for the Primary Sedimentation Process Wastewater Treatment Facility. SOJP No. 4.

ERIC Educational Resources Information Center

Charles County Community Coll., La Plata, MD.

This guide describes standard operating job procedures for the primary sedimentation process of wastewater treatment plants. The primary sedimentation process involves removing settleable and suspended solids, in part, from wastewater by gravitational forces, and scum and other floatable solids from wastewater by mechanical means. Step-by-step…

Municipal Wastewater Processes. Instructor Guide. Working for Clean Water: An Information Program for Advisory Groups.

ERIC Educational Resources Information Center

Stoltzfus, Lorna

Described is a one-hour overview of the unit processes which comprise a municipal wastewater treatment system. Topics covered in this instructor's guide include types of pollutants encountered, treatment methods, and procedures by which wastewater treatment processes are selected. A slide-tape program is available to supplement this component of…

Effect of Time Dependent Bending of Current Sheets in Response to Generation of Plasma Jets and Reverse Currents

NASA Astrophysics Data System (ADS)

Frank, Anna

Magnetic reconnection is a basis for many impulsive phenomena in space and laboratory plasmas accompanied by effective transformation of magnetic energy. Reconnection processes usually occur in relatively thin current sheets (CSs), which separate magnetic fields of different or opposite directions. We report on recent observations of time dependent bending of CSs, which results from plasma dynamics inside the sheet. The experiments are carried out with the CS-3D laboratory device (Institute of General Physics RAS, Moscow) [1]. The CS magnetic structure with an X line provides excitation of the Hall currents and plasma acceleration from the X line to both side edges [2]. In the presence of the guide field By the Hall currents give rise to bending of the sheet: the peripheral regions located away from the X line are deflected from CS middle plane (z=0) in the opposite directions ±z [3]. We have revealed generation of reverse currents jy near the CS edges, i.e. the currents flowing in the opposite direction to the main current in the sheet [4]. There are strong grounds to believe that reverse currents are generated by the outflow plasma jets [5], accelerated inside the sheet and penetrated into the regions with strong normal magnetic field component Bz [4]. An impressive effect of sudden change in the sign of the CS bend has been disclosed recently, when analyzing distributions of plasma density [6] and current away from the X line, in the presence of the guide field By. The CS configuration suddenly becomes opposite from that observed at the initial stage, and this effect correlates well with generation of reverse currents. Consequently this effect can be related to excitation of the reverse Hall currents owing to generation of reverse currents jy in the CS. Hence it may be concluded that CSs may exhibit time dependent vertical z-displacements, and the sheet geometry depends on excitation of the Hall currents, acceleration of plasma jets and generation of reverse currents. The work was supported in part by the Program (OFN-15) “Plasma Processes in Space and Laboratory” of the Division of Physical Sciences of the Russian Academy of Sciences. 1. Frank A.G., Bogdanov S.Yu., Markov V.S. et al. // Phys. Plasmas 2005. 12, 052316(1-11). 2. Frank A.G., Bugrov S.G., Markov V.S. // Phys. Plasmas 2008. 15, 092102 (1-10). 3. Frank A.G., Bogdanov S.Yu., Dreiden G.V. et al. // Phys. Lett. A 2006. 348, 318-325. 4. Frank A.G., Kyrie N.P., Satunin S.N. // Phys. Plasmas 2011. 18, 111209 (1-9). 5. Kyrie N.P., Markov V.S., Frank A.G. // Plasma Phys. Reports 2010. 36, 357-364; JETP Lett. 2012. 95, 14-19. 6. Ostrovskaya G.V., Frank A.G. // Plasma Phys. Reports 2014. 40, 21-33.

“She’s a dog at the end of the day”: Guide dog owners’ perspectives on the behaviour of their guide dog

PubMed Central

Craigon, Peter J.; Hobson- West, Pru; England, Gary C. W.; Whelan, Chantelle; Lethbridge, Emma; Asher, Lucy

2017-01-01

A guide dog is a domestic dog (Canis familiaris) that is specifically educated to provide mobility support to a blind or visually impaired owner. Current dog suitability assessments focus on behavioural traits, including: trainability, reactivity or attention to environmental stimuli, low aggressiveness, fearfulness and stress behaviour, energy levels, and attachment behaviour. The aim of this study was to find out which aspects of guide dog behaviour are of key importance to guide dog owners themselves. Sixty-three semi-structured interview surveys were carried out with guide dog owners. Topics included the behaviour of their guide dog both within and outside their working role, and also focused on examples of behaviour which might be considered outside a guide dog owner’s typical expectations. Both positive and negative examples and situations were covered. This allowed for the discovery of new perspectives and emerging themes on living and working with a guide dog. Thematic analysis of the results reveals that a dog’s safe behaviour in the face of traffic was the most important positive aspect of a guide dog’s behaviour and pulling or high tension on the lead and /or harness was the most discussed negative aspect. Other aspects of guide dog behaviour were highlighted as particularly pleasing or disappointing by owners including attentiveness to the task, work, environment and owner; confidence in work and decision making (with confident dogs resulting in confident owners) obedience and control; calmness and locating objectives. The results reveal important areas of behaviour that are not currently considered priorities in guide dog assessments; these key areas were consistency of behaviour, the dog’s maturity and the dog’s behaviour in relation to children. The survey revealed a large range in what owners considered problematic or pleasing behaviours and this highlights the heterogeneity in guide dog owners and the potential multifarious roles of the guide dog. This study contributes to the literature on which behaviour is considered appropriate or inappropriate in dogs and on the nature of human-animal interactions. PMID:28423053

Environmental Compliance Guide

DOE Office of Scientific and Technical Information (OSTI.GOV)

None

1981-02-01

The Guide is intended to assist Department of Energy personnel by providing information on the NEPA process, the processes of other environmental statutes that bear on the NEPA process, the timing relationships between the NEPA process and these other processes, as well as timing relationships between the NEPA process and the development process for policies, programs, and projects. This information should be helpful not only in formulating environmental compliance plans but also in achieving compliance with NEPA and various other environmental statutes. The Guide is divided into three parts with related appendices: Part I provides guidance for developing environmental compliancemore » plans for DOE actions; Part II is devoted to NEPA with detailed flowcharts depicting the compliance procedures required by CEQ regulations and Department of Energy NEPA Guidelines; and Part III contains a series of flowcharts for other Federal environmental requirements that may apply to DOE projects.« less

Analytical and regression models of glass rod drawing process

NASA Astrophysics Data System (ADS)

Alekseeva, L. B.

2018-03-01

The process of drawing glass rods (light guides) is being studied. The parameters of the process affecting the quality of the light guide have been determined. To solve the problem, mathematical models based on general equations of continuum mechanics are used. The conditions for the stable flow of the drawing process have been found, which are determined by the stability of the motion of the glass mass in the formation zone to small uncontrolled perturbations. The sensitivity of the formation zone to perturbations of the drawing speed and viscosity is estimated. Experimental models of the drawing process, based on the regression analysis methods, have been obtained. These models make it possible to customize a specific production process to obtain light guides of the required quality. They allow one to find the optimum combination of process parameters in the chosen area and to determine the required accuracy of maintaining them at a specified level.

Cross-tail current, field-aligned current, and B(y)

NASA Technical Reports Server (NTRS)

Kaufmann, Richard L.; Lu, Chen; Larson, Douglas J.

1994-01-01

Orbits of individual charged particles were traced in a one-dimensional magnetic field model that included a uniform cross-tail component B(sub yo). The effects of B(sub yo) on the cross-tail current distribution j(sub y)(z), the average cross-tail drift velocity(nu(sub y)z), and the average pitch angle change(delta alpha) experienced during current sheet encounters were calculated. The addition of a B(sub yo) that exceeded several tenths of one nanotesla completely eliminated all resonance effects for odd-N orbits. An odd-N resonance involves ions that enter and exit the current sheet on the same side. Pitch angles of nearly all such ions changed substantially during a typical current sheet interaction, and there was no region of large cross-tail drift velocity in the presence of a modest B(sub yo). the addition of a very large B(sub yo) guide field in the direction that enhances the natural drift produces a large j(y) and small (Delta alpha) for ions with all energies. The addition of a modest B(sub yo) had less effect near even-N resonances. In this case, ions in a small energy range were found to undergo so little change in pitch angle that particles which originated in the ionosphere would pass through the current sheet and return to the conjugate ionosphere. Finally, the cross-tail drift of ions from regions dominated by stochastic orbits to regions dominated by either resonant or guiding center orbits was considered. The ion drift speed changed substantially during such transitions. The accompanying electrons obey the guiding center equations, so electron drift is more uniform. Any difference between gradients in the fluxes associated with electron and ion drifts requires the presence of a Birkeland current in order to maintain charge neutrality. This plasma sheet region therefore serves as a current generator. The analysis predicts that the resulting Birkeland current connects to the lowest altitude equatorial regions in which ions drift to or from a point at which stochastic orbits predominate. The proposed mechanism appears only in analyses that include non-guiding-center effects.

Visualization of DNA in highly processed botanical materials.

PubMed

Lu, Zhengfei; Rubinsky, Maria; Babajanian, Silva; Zhang, Yanjun; Chang, Peter; Swanson, Gary

2018-04-15

DNA-based methods have been gaining recognition as a tool for botanical authentication in herbal medicine; however, their application in processed botanical materials is challenging due to the low quality and quantity of DNA left after extensive manufacturing processes. The low amount of DNA recovered from processed materials, especially extracts, is "invisible" by current technology, which has casted doubt on the presence of amplifiable botanical DNA. A method using adapter-ligation and PCR amplification was successfully applied to visualize the "invisible" DNA in botanical extracts. The size of the "invisible" DNA fragments in botanical extracts was around 20-220 bp compared to fragments of around 600 bp for the more easily visualized DNA in botanical powders. This technique is the first to allow characterization and visualization of small fragments of DNA in processed botanical materials and will provide key information to guide the development of appropriate DNA-based botanical authentication methods in the future. Copyright © 2017 Elsevier Ltd. All rights reserved.

Business Process Flow Diagrams in Tissue Bank Informatics System Design, and Identification and Communication of Best Practices: The Pharmaceutical Industry Experience.

PubMed

McDonald, Sandra A; Velasco, Elizabeth; Ilasi, Nicholas T

2010-12-01

Pfizer, Inc.'s Tissue Bank, in conjunction with Pfizer's BioBank (biofluid repository), endeavored to create an overarching internal software package to cover all general functions of both research facilities, including sample receipt, reconciliation, processing, storage, and ordering. Business process flow diagrams were developed by the Tissue Bank and Informatics teams as a way of characterizing best practices both within the Bank and in its interactions with key internal and external stakeholders. Besides serving as a first step for the software development, such formalized process maps greatly assisted the identification and communication of best practices and the optimization of current procedures. The diagrams shared here could assist other biospecimen research repositories (both pharmaceutical and other settings) for comparative purposes or as a guide to successful informatics design. Therefore, it is recommended that biorepositories consider establishing formalized business process flow diagrams for their laboratories, to address these objectives of communication and strategy.

Taking OSCE examiner training on the road: reaching the masses.

PubMed

Reid, Katharine; Smallwood, David; Collins, Margo; Sutherland, Ruth; Dodds, Agnes

To ensure the rigour of objective structured clinical examinations (OSCEs) in assessing medical students, medical school educators must educate examiners with a view to standardising examiner assessment behaviour. Delivering OSCE examiner training is a necessary yet challenging part of the OSCE process. A novel approach to implementing training for current and potential OSCE examiners was trialled by delivering large-group education sessions at major teaching hospitals. The 'OSCE Roadshow' comprised a short training session delivered in the context of teaching hospital 'Grand Rounds' to current and potential OSCE examiners. The training was developed to educate clinicians about OSCE processes, clarify the examiners' role and required behaviours, and to review marking guides and mark allocation in an effort to standardise OSCE processes and encourage consistency in examiner marking behaviour. A short exercise allowed participants to practise marking a mock OSCE to investigate examiner marking behaviour after the training. OSCE Roadshows at four metropolitan and one rural teaching hospital were well received and well attended by 171 clinicians across six sessions. Unexpectedly, medical students also attended in large numbers ( n= 220). After training, participants' average scores for the mock OSCE clustered closely around the ideal score of 28 (out of 40), and the average scores did not differ according to the levels of clinical experience. The OSCE Roadshow demonstrated the potential of brief familiarisation training in reaching large numbers of current and potential OSCE examiners in a time and cost-effective manner to promote standardisation of OSCE processes.

Taking OSCE examiner training on the road: reaching the masses.

PubMed

Reid, Katharine; Smallwood, David; Collins, Margo; Sutherland, Ruth; Dodds, Agnes

2016-01-01

Background To ensure the rigour of objective structured clinical examinations (OSCEs) in assessing medical students, medical school educators must educate examiners with a view to standardising examiner assessment behaviour. Delivering OSCE examiner training is a necessary yet challenging part of the OSCE process. A novel approach to implementing training for current and potential OSCE examiners was trialled by delivering large-group education sessions at major teaching hospitals. Methods The 'OSCE Roadshow' comprised a short training session delivered in the context of teaching hospital 'Grand Rounds' to current and potential OSCE examiners. The training was developed to educate clinicians about OSCE processes, clarify the examiners' role and required behaviours, and to review marking guides and mark allocation in an effort to standardise OSCE processes and encourage consistency in examiner marking behaviour. A short exercise allowed participants to practise marking a mock OSCE to investigate examiner marking behaviour after the training. Results OSCE Roadshows at four metropolitan and one rural teaching hospital were well received and well attended by 171 clinicians across six sessions. Unexpectedly, medical students also attended in large numbers (n=220). After training, participants' average scores for the mock OSCE clustered closely around the ideal score of 28 (out of 40), and the average scores did not differ according to the levels of clinical experience. Conclusion The OSCE Roadshow demonstrated the potential of brief familiarisation training in reaching large numbers of current and potential OSCE examiners in a time and cost-effective manner to promote standardisation of OSCE processes.

Development of shared decision-making resources to help inform difficult healthcare decisions: An example focused on dysvascular partial foot and transtibial amputations.

PubMed

Quigley, Matthew; Dillon, Michael P; Fatone, Stefania

2018-02-01

Shared decision making is a consultative process designed to encourage patient participation in decision making by providing accurate information about the treatment options and supporting deliberation with the clinicians about treatment options. The process can be supported by resources such as decision aids and discussion guides designed to inform and facilitate often difficult conversations. As this process increases in use, there is opportunity to raise awareness of shared decision making and the international standards used to guide the development of quality resources for use in areas of prosthetic/orthotic care. To describe the process used to develop shared decision-making resources, using an illustrative example focused on decisions about the level of dysvascular partial foot amputation or transtibial amputation. Development process: The International Patient Decision Aid Standards were used to guide the development of the decision aid and discussion guide focused on decisions about the level of dysvascular partial foot amputation or transtibial amputation. Examples from these shared decision-making resources help illuminate the stages of development including scoping and design, research synthesis, iterative development of a prototype, and preliminary testing with patients and clinicians not involved in the development process. Lessons learnt through the process, such as using the International Patient Decision Aid Standards checklist and development guidelines, may help inform others wanting to develop similar shared decision-making resources given the applicability of shared decision making to many areas of prosthetic-/orthotic-related practice. Clinical relevance Shared decision making is a process designed to guide conversations that help patients make an informed decision about their healthcare. Raising awareness of shared decision making and the international standards for development of high-quality decision aids and discussion guides is important as the approach is introduced in prosthetic-/orthotic-related practice.

Antenna Test Facility (ATF): User Test Planning Guide

NASA Technical Reports Server (NTRS)

Lin, Greg

2011-01-01

Test process, milestones and inputs are unknowns to first-time users of the ATF. The User Test Planning Guide aids in establishing expectations for both NASA and non-NASA facility customers. The potential audience for this guide includes both internal and commercial spaceflight hardware/software developers. It is intended to assist their test engineering personnel in test planning and execution. Material covered includes a roadmap of the test process, roles and responsibilities of facility and user, major milestones, facility capabilities, and inputs required by the facility. Samples of deliverables, test article interfaces, and inputs necessary to define test scope, cost, and schedule are included as an appendix to the guide.

Chamber B Thermal/Vacuum Chamber: User Test Planning Guide

NASA Technical Reports Server (NTRS)

Montz, Mike E.

2012-01-01

Test process, milestones and inputs are unknowns to first-time users of Chamber B. The User Test Planning Guide aids in establishing expectations for both NASA and non-NASA facility customers. The potential audience for this guide includes both internal and commercial spaceflight hardware/software developers. It is intended to assist their test engineering personnel in test planning and execution. Material covered includes a roadmap of the test process, roles and responsibilities of facility and user, major milestones, facility capabilities, and inputs required by the facility. Samples of deliverables, test article interfaces, and inputs necessary to define test scope, cost, and schedule are included as an appendix to the guide.

Audio Development Laboratory (ADL) User Test Planning Guide

NASA Technical Reports Server (NTRS)

Romero, Andy

2012-01-01

Test process, milestones and inputs are unknowns to first-time users of the ADL. The User Test Planning Guide aids in establishing expectations for both NASA and non-NASA facility customers. The potential audience for this guide includes both internal and commercial spaceflight hardware/software developers. It is intended to assist their test engineering personnel in test planning and execution. Material covered includes a roadmap of the test process, roles and responsibilities of facility and user, major milestones, facility capabilities, and inputs required by the facility. Samples of deliverables, test article interfaces, and inputs necessary to define test scope, cost, and schedule are included as an appendix to the guide.

Radiant Heat Test Facility (RHTF): User Test Planning Guide

NASA Technical Reports Server (NTRS)

DelPapa, Steven

2011-01-01

Test process, milestones and inputs are unknowns to first-time users of the RHTF. The User Test Planning Guide aids in establishing expectations for both NASA and non- NASA facility customers. The potential audience for this guide includes both internal and commercial spaceflight hardware/software developers. It is intended to assist their test engineering personnel in test planning and execution. Material covered includes a roadmap of the test process, roles and responsibilities of facility and user, major milestones, facility capabilities, and inputs required by the facility. Samples of deliverables, test article interfaces, and inputs necessary to define test scope, cost, and schedule are included as an appendix to the guide.

Electronic Systems Test Laboratory (ESTL) User Test Planning Guide

NASA Technical Reports Server (NTRS)

Robinson, Neil

2011-01-01

Test process, milestones and inputs are unknowns to first-time users of the ESTL. The User Test Planning Guide aids in establishing expectations for both NASA and non-NASA facility customers. The potential audience for this guide includes both internal and commercial spaceflight hardware/software developers. It is intended to assist their test engineering personnel in test planning and execution. Material covered includes a roadmap of the test process, roles and responsibilities of facility and user, major milestones, facility capabilities, and inputs required by the facility. Samples of deliverables, test article interfaces, and inputs necessary to define test scope, cost, and schedule are included as an appendix to the guide.

Communication Systems Simulation Laboratory (CSSL): Simulation Planning Guide

NASA Technical Reports Server (NTRS)

Schlesinger, Adam

2012-01-01

The simulation process, milestones and inputs are unknowns to first-time users of the CSSL. The Simulation Planning Guide aids in establishing expectations for both NASA and non-NASA facility customers. The potential audience for this guide includes both internal and commercial spaceflight hardware/software developers. It is intended to assist their engineering personnel in simulation planning and execution. Material covered includes a roadmap of the simulation process, roles and responsibilities of facility and user, major milestones, facility capabilities, and inputs required by the facility. Samples of deliverables, facility interfaces, and inputs necessary to define scope, cost, and schedule are included as an appendix to the guide.

Advanced Materials Laboratory User Test Planning Guide

NASA Technical Reports Server (NTRS)

Orndoff, Evelyne

2012-01-01

Test process, milestones and inputs are unknowns to first-time users of the Advanced Materials Laboratory. The User Test Planning Guide aids in establishing expectations for both NASA and non-NASA facility customers. The potential audience for this guide includes both internal and commercial spaceflight hardware/software developers. It is intended to assist their test engineering personnel in test planning and execution. Material covered includes a roadmap of the test process, roles and responsibilities of facility and user, major milestones, facility capabilities, and inputs required by the facility. Samples of deliverables, test article interfaces, and inputs necessary to define test scope, cost, and schedule are included as an appendix to the guide.

Structures Test Laboratory (STL). User Test Planning Guide

NASA Technical Reports Server (NTRS)

Zipay, John J.

2011-01-01

Test process, milestones and inputs are unknowns to first-time users of the STL. The User Test Planning Guide aids in establishing expectations for both NASA and non-NASA facility customers. The potential audience for this guide includes both internal and commercial spaceflight hardware/software developers. It is intended to assist their test engineering personnel in test planning and execution. Material covered includes a roadmap of the test process, roles and responsibilities of facility and user, major milestones, facility capabilities, and inputs required by the facility. Samples of deliverables, test article interfaces, and inputs necessary to define test scope, cost, and schedule are included as an appendix to the guide.

Systems Engineering Simulator (SES) Simulator Planning Guide

NASA Technical Reports Server (NTRS)

McFarlane, Michael

2011-01-01

The simulation process, milestones and inputs are unknowns to first-time users of the SES. The Simulator Planning Guide aids in establishing expectations for both NASA and non-NASA facility customers. The potential audience for this guide includes both internal and commercial spaceflight hardware/software developers. It is intended to assist their engineering personnel in simulation planning and execution. Material covered includes a roadmap of the simulation process, roles and responsibilities of facility and user, major milestones, facility capabilities, and inputs required by the facility. Samples of deliverables, facility interfaces, and inputs necessary to define scope, cost, and schedule are included as an appendix to the guide.

Computational Electromagnetics (CEM) Laboratory: Simulation Planning Guide

NASA Technical Reports Server (NTRS)

Khayat, Michael A.

2011-01-01

The simulation process, milestones and inputs are unknowns to first-time users of the CEM Laboratory. The Simulation Planning Guide aids in establishing expectations for both NASA and non-NASA facility customers. The potential audience for this guide includes both internal and commercial spaceflight hardware/software developers. It is intended to assist their engineering personnel in simulation planning and execution. Material covered includes a roadmap of the simulation process, roles and responsibilities of facility and user, major milestones, facility capabilities, and inputs required by the facility. Samples of deliverables, facility interfaces, and inputs necessary to define scope, cost, and schedule are included as an appendix to the guide.

Bridging the Divide Between Climate and Global Change Science and Education of Public and K-12 Visitors at the National Center for Atmospheric Research

NASA Astrophysics Data System (ADS)

Foster, S. Q.; Johnson, R. M.; Carbone, L.; Munoz, R.; Eastburn, T.; Ammann, C.; Lu, G.; Richmond, A.; Committee, S.

2004-12-01

The study of climate and global change is an important on-going focus for scientists at the National Center for Atmospheric Research (NCAR). Programs overseen by the University Corporation for Atmospheric Research Office of Education and Outreach (UCAR-EO) help to translate NCAR's scientific programs, methodologies, and technologies and their societal benefits to over 80,000 visitors to the NCAR Mesa Laboratory each year, including about 10,000 K-12 students. This is currently accomplished through the implementation of an increasingly integrated system of exhibits, guided tours, an audiotour, programs for school groups, and a teachers' guide to the exhibits, which is currently in development. The Climate Discovery Exhibit unveiled in July 2003 and expanded in 2004 offers visitors visually engaging and informative text panels, graphics, artifacts, and interactives describing Sun-Earth connections, dynamic processes that contribute to and mediate climate change, and the Earth's climate history. The exhibit seeks to help visitors to understand why scientists model the global climate system and how information about past and current climate is used to validate models and build scenarios for Earth's future climate. Exhibit-viewers are challenged to ask questions and reflect upon decision making challenges while considering the roles various natural and human-induced factors play in shaping these predictions. With support from NASA and NCAR, a K-12 Teacher's Guide has been developed corresponding the Climate Discovery exhibit's sections addressing the Sun-Earth connection and past climates (the Little Ice Age, in particular). This presentation will review efforts to identify the challenges of communicating with the public and school groups about climate change, while also describing several successful strategies for utilizing visitor questionnaires and interviews to learn how to develop and refine educational resources that will target their interests, bolster their knowledge, and address their misconceptions. Visitors view the exhibit every day of the year on their own, using an audiotour, or with a tour guide. NCAR/UCAR's educational content about climate change is increasingly available to national audiences through the new NCAR EO web site (www.ncar.ucar.edu/eo), Windows to the Universe (www.windows.ucar.edu), UCAR-EO's summer teachers workshops, and sessions at the National Science Teacher Association meetings and other professional education venues.

Image-guided diagnosis of prostate cancer can increase detection of tumors

Cancer.gov

In the largest prospective study to date of image-guided technology for identifying suspicious regions of the prostate to biopsy, researchers compared the ability of this technology to detect high-risk prostate cancer with that of the current standard of

Implementation of the 2002 AASHTO design guide for pavement structures in KDOT

DOT National Transportation Integrated Search

2008-11-01

The AASHTO Guide for the Design of Pavement Structures is the primary document used by state highway agencies to design new and rehabilitated highway pavements. Currently the Kansas Department of Transportation (KDOT) uses the 1993 edition of the AAS...

Concrete pavement mixture design and analysis (MDA) guide specification for highway concrete pavements : commentary.

DOT National Transportation Integrated Search

2012-10-01

A guide specification and commentary have been prepared that lay out current state-of-the art thinking with respect to materials and : mixture selection, proportioning, and acceptance. These documents take into account the different environments, pra...

Making Research Guides More Useful and More Well Used

ERIC Educational Resources Information Center

Strutin, Michal

2008-01-01

In summer 2008, a small group of Santa Clara University librarians were charged with exploring ways of making online library research guides more user friendly and interactive. In order to know how to enhance our guides, we first asked the question, "What makes a research guide useful?" What follows is a detailed process of discovery.…

Five Steps for Structuring Data-Informed Conversations and Action in Education. REL 2013-001

ERIC Educational Resources Information Center

Kekahio, Wendy; Baker, Myriam

2013-01-01

Using data strategically to guide decisions and actions can have a positive effect on education practices and processes. This facilitation guide shows education data teams how to move beyond simply reporting data to applying data to direct strategic action. Using guiding questions, suggested activities, and activity forms, this guide provides…

This is Your Life: A Career and Education Planning Guide: Educator's Companion

ERIC Educational Resources Information Center

Alberta Advanced Education and Technology, 2009

2009-01-01

This guide was developed to fill a need identified by high school educators and Alberta Advanced Education and Technology staff. The Guide introduces students to the principles of career and education planning and various authorized Alberta resources by helping students work through the planning process. The student guide is a series of modules…

Originating Conferences and Credit Courses. Using WOI Satellite Transmission. A Basic Guide.

ERIC Educational Resources Information Center

Stinehart, Kathleen; And Others

This guide was developed to help administrators and educators plan and implement videoconferences and credit courses using the Iowa State University studios (WOI). In a short narrative format, the guide leads the reader through the videoconference or course process. The guide is organized in three sections. The first section presents an overview…

Treatment of child anxiety disorders via guided parent-delivered cognitive-behavioural therapy: randomised controlled trial.

PubMed

Thirlwall, Kerstin; Cooper, Peter J; Karalus, Jessica; Voysey, Merryn; Willetts, Lucy; Creswell, Cathy

2013-12-01

Promising evidence has emerged of clinical gains using guided self-help cognitive-behavioural therapy (CBT) for child anxiety and by involving parents in treatment; however, the efficacy of guided parent-delivered CBT has not been systematically evaluated in UK primary and secondary settings. To evaluate the efficacy of low-intensity guided parent-delivered CBT treatments for children with anxiety disorders. A total of 194 children presenting with a current anxiety disorder, whose primary carer did not meet criteria for a current anxiety disorder, were randomly allocated to full guided parent-delivered CBT (four face-to-face and four telephone sessions) or brief guided parent-delivered CBT (two face-to-face and two telephone sessions), or a wait-list control group (trial registration: ISRCTN92977593). Presence and severity of child primary anxiety disorder (Anxiety Disorders Interview Schedule for DSM-IV, child/parent versions), improvement in child presentation of anxiety (Clinical Global Impression - Improvement scale), and change in child anxiety symptoms (Spence Children's Anxiety Scale, child/parent version and Child Anxiety Impact scale, parent version) were assessed at post-treatment and for those in the two active treatment groups, 6 months post-treatment. Full guided parent-delivered CBT produced superior diagnostic outcomes compared with wait-list at post-treatment, whereas brief guided parent-delivered CBT did not: at post-treatment, 25 (50%) of those in the full guided CBT group had recovered from their primary diagnosis, compared with 16 (25%) of those on the wait-list (relative risk (RR) 1.85, 95% CI 1.14-2.99); and in the brief guided CBT group, 18 participants (39%) had recovered from their primary diagnosis post-treatment (RR = 1.56, 95% CI 0.89-2.74). Level of therapist training and experience was unrelated to child outcome. Full guided parent-delivered CBT is an effective and inexpensive first-line treatment for child anxiety.

Rheotaxis guides mammalian sperm

PubMed Central

Miki, Kiyoshi; Clapham, David E

2013-01-01

Background In sea urchins, spermatozoan motility is altered by chemotactic peptides, giving rise to the assumption that mammalian eggs also emit chemotactic agents that guide spermatozoa through the female reproductive tract to the mature oocyte. Mammalian spermatozoa indeed undergo complex adaptations within the female (the process of capacitation) that are initiated by agents ranging from pH to progesterone, but these factors are not necessarily taxic. Currently, chemotaxis, thermotaxis, and rheotaxis have not been definitively established in mammals. Results Here, we show that positive rheotaxis, the ability of organisms to orient and swim against the flow of surrounding fluid, is a major taxic factor for mouse and human sperm. This flow is generated within 4 hours of sexual stimulation and coitus in female mice; prolactin-triggered oviductal fluid secretion clears the oviduct of debris, lowers viscosity, and generates the stream that guides sperm migration in the oviduct. Rheotaxic movement is demonstrated in capacitated and uncapacitated spermatozoa in low and high viscosity medium. Finally, we show that a unique sperm motion we quantify using the sperm head's rolling rate reflects sperm rotation that generates essential force for positioning the sperm in the stream. Rotation requires CatSper channels, presumably by enabling Ca2+ influx. Conclusions We propose that rheotaxis is a major determinant of sperm guidance over long distances in the mammalian female reproductive tract. Coitus induces fluid flow to guide sperm in the oviduct. Sperm rheotaxis requires rotational motion during CatSper channel-dependent hyperactivated motility. PMID:23453951

Construction of negative images of menstruation in Indian TV commercials.

PubMed

Yagnik, Arpan Shailesh

2012-01-01

Menstruation is a perfectly normal physiological process; however, it is problematized in TV commercials. In the current study, a thematic analysis of 50 Indian TV commercials was conducted to identify the latent themes. Social captivity, restrictions, professional inefficiency, and physical and mental discomfort emerged as major themes after the analysis. The knowledge that manufacturers use such themes for image building and creating a conducive buying environment may prevent the reinforcement of menstrual taboos in Indian society. It can also guide the manufacturers in ideating and creating positive and healthier ways of advertising female hygiene products.

Eukaryotic Chemotaxis

PubMed Central

Rappel, Wouter-Jan; Loomis, William F.

2009-01-01

During eukaryotic chemotaxis, external chemical gradients guide the crawling motion of cells. This process plays an important role in a large variety of biological systems and has wide ranging medical implications. New experimental techniques including confocal microscopy and microfluidics have advanced our understanding of chemotaxis while numerical modeling efforts are beginning to offer critical insights. In this short review, we survey the current experimental status of the field by dividing chemotaxis into three distinct “modules”: directional sensing, polarity and motility. For each module, we attempt to point out potential new directions of research and discuss how modeling studies interact with experimental investigations. PMID:20648241

IDSE Version 1 User's Manual

NASA Technical Reports Server (NTRS)

Mayer, Richard

1988-01-01

The integrated development support environment (IDSE) is a suite of integrated software tools that provide intelligent support for information modelling. These tools assist in function, information, and process modeling. Additional tools exist to assist in gathering and analyzing information to be modeled. This is a user's guide to application of the IDSE. Sections covering the requirements and design of each of the tools are presented. There are currently three integrated computer aided manufacturing definition (IDEF) modeling methodologies: IDEF0, IDEF1, and IDEF2. Also, four appendices exist to describe hardware and software requirements, installation procedures, and basic hardware usage.

Manufacturing waste disposal practices of the chemical propulsion industry

NASA Technical Reports Server (NTRS)

Goldberg, Benjamin E.; Adams, Daniel E.; Schutzenhofer, Scott A.

1995-01-01

The waste production, mitigation and disposal practices of the United States chemical propulsion industry have been investigated, delineated, and comparatively assessed to the U.S. industrial base. Special emphasis has been placed on examination of ozone depleting chemicals (ODC's). The research examines present and anticipated future practices and problems encountered in the manufacture of solid and liquid propulsion systems. Information collected includes current environmental laws and regulations that guide the industry practices, processes in which ODC's are or have been used, quantities of waste produced, funding required to maintain environmentally compliant practices, and preventive efforts.

Understanding place and health: a heuristic for using administrative data.

PubMed

Frohlich, Katherine L; Dunn, James R; McLaren, Lindsay; Shiell, Alan; Potvin, Louise; Hawe, Penelope; Dassa, Clément; Thurston, Wilfreda E

2007-06-01

The increasing availability, use and limitations of administrative data for place-based population health research, and a lack of theory development, created the context for the current paper. We developed a heuristic to interrogate administrative data sets and to help us develop explanatory pathways for linking place and health. Guided by a worked example, we argue that some items in administrative data sets lend themselves to multiple theories, creating problems of inference owing to the implications of using inductive versus deductive reasoning during the research process, and that certain types of theories are privileged when used administrative data bases.

miRNA*: a passenger stranded in RNA-induced silencing complex?

PubMed

Mah, S M; Buske, C; Humphries, R K; Kuchenbauer, F

2010-01-01

Processing of the pre-microRNA (pre-miRNA) through Dicer1 generates a miRNA duplex, consisting of a miRNA and miRNA* strand (also termed guide strand and passenger strand, respectively). Despite the general consensus that miRNA*s have no regulatory activity, recent publications have provided evidence that the abundance, possible function, and physiological relevance of miRNA*s have been underestimated. This review provides an account of our current understanding of miRNA* origination and activity, mounting evidence for their unique functions and regulatory mechanisms, and examples of specific miRNA*s from the literature.

How measurement science can improve confidence in research results.

PubMed

Plant, Anne L; Becker, Chandler A; Hanisch, Robert J; Boisvert, Ronald F; Possolo, Antonio M; Elliott, John T

2018-04-01

The current push for rigor and reproducibility is driven by a desire for confidence in research results. Here, we suggest a framework for a systematic process, based on consensus principles of measurement science, to guide researchers and reviewers in assessing, documenting, and mitigating the sources of uncertainty in a study. All study results have associated ambiguities that are not always clarified by simply establishing reproducibility. By explicitly considering sources of uncertainty, noting aspects of the experimental system that are difficult to characterize quantitatively, and proposing alternative interpretations, the researcher provides information that enhances comparability and reproducibility.

Vision in flying insects.

PubMed

Egelhaaf, Martin; Kern, Roland

2002-12-01

Vision guides flight behaviour in numerous insects. Despite their small brain, insects easily outperform current man-made autonomous vehicles in many respects. Examples are the virtuosic chasing manoeuvres male flies perform as part of their mating behaviour and the ability of bees to assess, on the basis of visual motion cues, the distance travelled in a novel environment. Analyses at both the behavioural and neuronal levels are beginning to unveil reasons for such extraordinary capabilities of insects. One recipe for their success is the adaptation of visual information processing to the specific requirements of the behavioural tasks and to the specific spatiotemporal properties of the natural input.

Automated documentation generator for advanced protein crystal growth

NASA Technical Reports Server (NTRS)

Maddux, Gary A.; Provancha, Anna; Chattam, David

1994-01-01

To achieve an environment less dependent on the flow of paper, automated techniques of data storage and retrieval must be utilized. This software system, 'Automated Payload Experiment Tool,' seeks to provide a knowledge-based, hypertext environment for the development of NASA documentation. Once developed, the final system should be able to guide a Principal Investigator through the documentation process in a more timely and efficient manner, while supplying more accurate information to the NASA payload developer. The current system is designed for the development of the Science Requirements Document (SRD), the Experiment Requirements Document (ERD), the Project Plan, and the Safety Requirements Document.

System engineering for image and video systems

NASA Astrophysics Data System (ADS)

Talbot, Raymond J., Jr.

1997-02-01

The National Law Enforcement and Corrections Technology Centers (NLECTC) support public law enforcement agencies with technology development, evaluation, planning, architecture, and implementation. The NLECTC Western Region has a particular emphasis on surveillance and imaging issues. Among its activities, working with government and industry, NLECTC-WR produces 'Guides to Best Practices and Acquisition Methodologies' that facilitate government organizations in making better informed purchasing and operational decisions. This presentation includes specific examples from current activities. Through these systematic procedures, it is possible to design solutions optimally matched to the desired outcomes and provide a process for continuous improvement and greater public awareness of success.

ROAD MAP FOR DEVELOPMENT OF CRYSTAL-TOLERANT HIGH LEVEL WASTE GLASSES

DOE Office of Scientific and Technical Information (OSTI.GOV)

Fox, K.; Peeler, D.; Herman, C.

The U.S. Department of Energy (DOE) is building a Tank Waste Treatment and Immobilization Plant (WTP) at the Hanford Site in Washington to remediate 55 million gallons of radioactive waste that is being temporarily stored in 177 underground tanks. Efforts are being made to increase the loading of Hanford tank wastes in glass while meeting melter lifetime expectancies and process, regulatory, and product quality requirements. This road map guides the research and development for formulation and processing of crystaltolerant glasses, identifying near- and long-term activities that need to be completed over the period from 2014 to 2019. The primary objectivemore » is to maximize waste loading for Hanford waste glasses without jeopardizing melter operation by crystal accumulation in the melter or melter discharge riser. The potential applicability to the Savannah River Site (SRS) Defense Waste Processing Facility (DWPF) will also be addressed in this road map. The planned research described in this road map is motivated by the potential for substantial economic benefits (significant reductions in glass volumes) that will be realized if the current constraints (T1% for WTP and TL for DWPF) are approached in an appropriate and technically defensible manner for defense waste and current melter designs. The basis of this alternative approach is an empirical model predicting the crystal accumulation in the WTP glass discharge riser and melter bottom as a function of glass composition, time, and temperature. When coupled with an associated operating limit (e.g., the maximum tolerable thickness of an accumulated layer of crystals), this model could then be integrated into the process control algorithms to formulate crystal-tolerant high-level waste (HLW) glasses targeting high waste loadings while still meeting process related limits and melter lifetime expectancies. The modeling effort will be an iterative process, where model form and a broader range of conditions, e.g., glass composition and temperature, will evolve as additional data on crystal accumulation are gathered. Model validation steps will be included to guide the development process and ensure the value of the effort (i.e., increased waste loading and waste throughput). A summary of the stages of the road map for developing the crystal-tolerant glass approach, their estimated durations, and deliverables is provided.« less

Development of a Fully Automated Guided Wave System for In-Process Cure Monitoring of CFRP Composite Laminates

NASA Technical Reports Server (NTRS)

Hudson, Tyler B.; Hou, Tan-Hung; Grimsley, Brian W.; Yaun, Fuh-Gwo

2016-01-01

A guided wave-based in-process cure monitoring technique for carbon fiber reinforced polymer (CFRP) composites was investigated at NASA Langley Research Center. A key cure transition point (vitrification) was identified and the degree of cure was monitored using metrics such as amplitude and time of arrival (TOA) of guided waves. Using an automated system preliminarily developed in this work, high-temperature piezoelectric transducers were utilized to interrogate a twenty-four ply unidirectional composite panel fabricated from Hexcel (Registered Trademark) IM7/8552 prepreg during cure. It was shown that the amplitude of the guided wave increased sharply around vitrification and the TOA curve possessed an inverse relationship with degree of cure. The work is a first step in demonstrating the feasibility of transitioning the technique to perform in-process cure monitoring in an autoclave, defect detection during cure, and ultimately a closed-loop process control to maximize composite part quality and consistency.

Analysis of Nursing Clinical Decision Support Requests and Strategic Plan in a Large Academic Health System

PubMed Central

Bavuso, Karen; Bouyer-Ferullo, Sharon; Goldsmith, Denise; Fairbanks, Amanda; Gesner, Emily; Lagor, Charles; Collins, Sarah

2016-01-01

Summary Objectives To understand requests for nursing Clinical Decision Support (CDS) interventions at a large integrated health system undergoing vendor-based EHR implementation. In addition, to establish a process to guide both short-term implementation and long-term strategic goals to meet nursing CDS needs. Materials and Methods We conducted an environmental scan to understand current state of nursing CDS over three months. The environmental scan consisted of a literature review and an analysis of CDS requests received from across our health system. We identified existing high priority CDS and paper-based tools used in nursing practice at our health system that guide decision-making. Results A total of 46 nursing CDS requests were received. Fifty-six percent (n=26) were specific to a clinical specialty; 22 percent (n=10) were focused on facilitating clinical consults in the inpatient setting. “Risk Assessments/Risk Reduction/Promotion of Healthy Habits” (n=23) was the most requested High Priority Category received for nursing CDS. A continuum of types of nursing CDS needs emerged using the Data-Information-Knowledge-Wisdom Conceptual Framework: 1) facilitating data capture, 2) meeting information needs, 3) guiding knowledge-based decision making, and 4) exposing analytics for wisdom-based clinical interpretation by the nurse. Conclusion Identifying and prioritizing paper-based tools that can be modified into electronic CDS is a challenge. CDS strategy is an evolving process that relies on close collaboration and engagement with clinical sites for short-term implementation and should be incorporated into a long-term strategic plan that can be optimized and achieved overtime. The Data-Information-Knowledge-Wisdom Conceptual Framework in conjunction with the High Priority Categories established may be a useful tool to guide a strategic approach for meeting short-term nursing CDS needs and aligning with the organizational strategic plan. PMID:27437036

Unweaving misconceptions: Guided learning, simulations, and misconceptions in learning principles of natural selection

NASA Astrophysics Data System (ADS)

Weeks, Brian E.

College students often come to the study of evolutionary biology with many misconceptions of how the processes of natural selection and speciation occur. How to relinquish these misconceptions with learners is a question that many educators face in introductory biology courses. Constructivism as a theoretical framework has become an accepted and promoted model within the epistemology of science instruction. However, constructivism is not without its skeptics who see some problems of its application in lacking necessary guidance for novice learners. This study within a quantitative, quasi-experimental format tested whether guided online instruction in a video format of common misconceptions in evolutionary biology produced higher performance on a survey of knowledge of natural selection versus more constructivist style learning in the form of student exploration of computer simulations of the evolutionary process. Performances on surveys were also explored for a combination of constructivist and guided techniques to determine if a consolidation of approaches produced higher test scores. Out of the 94 participants 95% displayed at least one misconception of natural selection in the pre-test while the study treatments produced no statistically significant improvements in post-test scores except within the video (guided learning treatment). These overall results demonstrated the stubbornness of misconceptions involving natural selection for adult learners and the difficulty of helping them overcome them. It also bolsters the idea that some misconceptions of natural selection and evolution may be hardwired in a neurological sense and that new, more long-term teaching techniques may be warranted. Such long-term strategies may not be best implemented with constructivist techniques alone, and it is likely that some level of guidance may be necessary for novice adult learners. A more substantial, nuanced approach for undergraduates is needed that consolidates successful teaching strategies to adult students that is based on current research.

What Are the Principles That Guide Behaviors in the Operating Room?: Creating a Framework to Define and Measure Performance.

PubMed

Madani, Amin; Vassiliou, Melina C; Watanabe, Yusuke; Al-Halabi, Becher; Al-Rowais, Mohammed S; Deckelbaum, Dan L; Fried, Gerald M; Feldman, Liane S

2017-02-01

To identify the core principles that guide expert intraoperative behaviors and to use these principles to develop a universal framework that defines intraoperative performance. Surgical outcomes are associated with intraoperative cognitive skills. Yet, our understanding of factors that control intraoperative judgment and decision-making are limited. As a result, current methods for training and measuring performance are somewhat subjective-more task rather than procedure-oriented-and usually not standardized. They thus provide minimal insight into complex cognitive processes that are fundamental to patient safety. Cognitive task analyses for 6 diverse surgical procedures were performed using semistructured interviews and field observations to describe the thoughts, behaviors, and actions that characterize and guide expert performance. Verbal data were transcribed, supplemented with content from published literature, coded, thematically analyzed using grounded-theory by 4 independent reviewers, and synthesized into a list of items. A conceptual framework was developed based on 42 semistructured interviews lasting 45 to 120 minutes, 5 expert panels and 51 field observations involving 35 experts, and 135 sources from the literature. Five domains of intraoperative performance were identified: psychomotor skills, declarative knowledge, advanced cognitive skills, interpersonal skills, and personal resourcefulness. Within the advanced cognitive skills domain, 21 themes were perceived to guide the behaviors of surgeons: 18 for surgical planning and error prevention, and 3 for error/injury recognition, rescue, and recovery. The application of these thought patterns was highly case-specific and variable amongst subspecialties, environments, and individuals. This study provides a comprehensive definition of intraoperative expertise, with greater insight into the complex cognitive processes that seem to underlie optimal performance. This framework provides trainees and other nonexperts with the necessary information to use in deliberate practice and the creation of effective thought habits that characterize expert performance. It may help to identify gaps in performance, and to isolate root causes of surgical errors with the ultimate goal of improving patient safety.

Guide to a Student-Family-School-Community Partnership: Using a Student & Data Driven Process to Improve School Environments & Promote Student Success

ERIC Educational Resources Information Center

Burgoa, Carol; Izu, Jo Ann

2010-01-01

This guide presents a data-driven, research-based process--referred to as the "school-community forum process"--for increasing youth voice, promoting resilience, strengthening adult-youth connections, and ultimately, for improving schools. It uses a "student listening circle"--a special type of focus group involving eight to…

A Guide for Developing Standard Operating Job Procedures for the Activated Sludge - Aeration & Sedimentation Process Wastewater Treatment Facility. SOJP No. 5.

ERIC Educational Resources Information Center

Mason, George J.

This guide for developing standard operating job procedures for wastewater treatment facilities is devoted to the activated sludge aeration and sedimentation process. This process is for conversion of nonsettleable and nonfloatable materials in wastewater to settleable, floculated biological groups and separation of the settleable solids from the…

A Guide for Developing Standard Operating Job Procedures for the Grit Removal Process Wastewater Treatment Facility. SOJP No. 2.

ERIC Educational Resources Information Center

Deal, Gerald A.; Montgomery, James A.

This guide describes standard operating job procedures for the grit removal process of wastewater treatment plants. Step-by-step instructions are given for pre-start up inspection, start-up, continuous operation, and shut-down procedures. A description of the equipment used in the process is given. Some theoretical material is presented. (BB)

Integration of design, structural, thermal and optical analysis: And user's guide for structural-to-optical translator (PATCOD)

NASA Technical Reports Server (NTRS)

Amundsen, R. M.; Feldhaus, W. S.; Little, A. D.; Mitchum, M. V.

1995-01-01

Electronic integration of design and analysis processes was achieved and refined at Langley Research Center (LaRC) during the development of an optical bench for a laser-based aerospace experiment. Mechanical design has been integrated with thermal, structural and optical analyses. Electronic import of the model geometry eliminates the repetitive steps of geometry input to develop each analysis model, leading to faster and more accurate analyses. Guidelines for integrated model development are given. This integrated analysis process has been built around software that was already in use by designers and analysis at LaRC. The process as currently implemented used Pro/Engineer for design, Pro/Manufacturing for fabrication, PATRAN for solid modeling, NASTRAN for structural analysis, SINDA-85 and P/Thermal for thermal analysis, and Code V for optical analysis. Currently, the only analysis model to be built manually is the Code V model; all others can be imported for the Pro/E geometry. The translator from PATRAN results to Code V optical analysis (PATCOD) was developed and tested at LaRC. Directions for use of the translator or other models are given.

Preliminary research on overmoded high-power millimeter-wave Cerenkov generator with dual-cavity reflector in low guiding magnetic field

DOE Office of Scientific and Technical Information (OSTI.GOV)

Ye, Hu; Wu, Ping; Science and Technology on High Power Microwave Laboratory, Northwest Institute of Nuclear Technology, Xi'an, Shaanxi 710024

2015-12-15

This paper presents preliminary research on a V-band overmoded Cerenkov generator with dual-cavity reflector operating in a low guiding magnetic field. It is found that the fluctuation of the electron envelope in the low guiding magnetic field can be predicted using an equivalent coaxial model of a foilless diode, and a dual-cavity reflector based on the model matching method can provide strong reflection at the front end of the overmoded structures so that any microwave power that leaks into the diode region can be effectively suppressed. Numerical simulations indicate that the control of the beam envelope and the use ofmore » the dual-cavity reflector ease generator operation in the low guiding magnetic field. In the experimental research, the fluctuation of the annular electron beam with the outer radius of 7.5 mm measures approximately 0.7 mm, which is in good agreement with the theoretical results. The disturbance caused by power leaking from the overmoded slow wave structure is eliminated by the dual-cavity reflector. With accurate fabrication and assembly processes, an operating frequency of 61.6 GHz is attained by the fifth harmonic heterodyne method, and the output power is measured to be approximately 123 MW by the far-field measurement method at a diode voltage of 445 kV, a beam current of 4.45 kA, and under a guiding magnetic field of 1.45 T. The output mode is measured using an array of neon flash bulbs, and the pulse shortening phenomenon is both observed and analyzed.« less

A guide to understanding and implementing risk evaluation and mitigation strategies in organ transplantation.

PubMed

Gabardi, Steven; Tichy, Eric M

2013-03-01

To review the components of the Congressional mandate for risk evaluation and mitigation strategies (REMS) managed by the Food and Drug Administration and assess their impact on health care providers practicing within the organ transplant arena. A non-date-limited search of MEDLINE and EMBASE (January 2007-June 2012) was conducted by using the following search terms: risk evaluation and mitigation strategies, REMS, and organ transplant, including a query of the individual organs. Information from the Federal Register and the Food and Drug Administration was also evaluated. REMS are strategies implemented to manage known or potential risks associated with medications and to ensure ongoing pharmacovigilance throughout the life of a pharmaceutical product. Elements of REMS programs may consist of 3 levels: a medication guide, communication plan, and elements to assure safe use. A medication guide is used to help prevent serious adverse events, aid in patients' decision making, and enhance medication adherence. Communication plans help educate health care providers and encourage adherence with REMS. The elements to assure safe use is a restrictive process implemented when it is deemed necessary to ensure safe access for patients to products with known serious risks. In transplant medicine, REMS currently exist for belatacept (medication guide and communication plan) and the mycophenolic acid derivatives (medication guide and elements to assure safe use). REMS are another step in the evolution of the development and marketing of pharmaceutical agents. Use of REMS in solid-organ transplant is becoming common. Transplant clinicians must provide required patient education and become involved with other aspects of REMS implementation to reduce the serious risks of pharmaceuticals and to improve patients' outcomes.

Current perspectives in the use of molecular imaging to target surgical treatments for genitourinary cancers.

PubMed

Greco, Francesco; Cadeddu, Jeffrey A; Gill, Inderbir S; Kaouk, Jihad H; Remzi, Mesut; Thompson, R Houston; van Leeuwen, Fijs W B; van der Poel, Henk G; Fornara, Paolo; Rassweiler, Jens

2014-05-01

Molecular imaging (MI) entails the visualisation, characterisation, and measurement of biologic processes at the molecular and cellular levels in humans and other living systems. Translating this technology to interventions in real-time enables interventional MI/image-guided surgery, for example, by providing better detection of tumours and their dimensions. To summarise and critically analyse the available evidence on image-guided surgery for genitourinary (GU) oncologic diseases. A comprehensive literature review was performed using PubMed and the Thomson Reuters Web of Science. In the free-text protocol, the following terms were applied: molecular imaging, genitourinary oncologic surgery, surgical navigation, image-guided surgery, and augmented reality. Review articles, editorials, commentaries, and letters to the editor were included if deemed to contain relevant information. We selected 79 articles according to the search strategy based on the Preferred Reporting Items for Systematic Reviews and Meta-analysis criteria and the IDEAL method. MI techniques included optical imaging and fluorescent techniques, the augmented reality (AR) navigation system, magnetic resonance imaging spectroscopy, positron emission tomography, and single-photon emission computed tomography. Experimental studies on the AR navigation system were restricted to the detection and therapy of adrenal and renal malignancies and in the relatively infrequent cases of prostate cancer, whereas fluorescence techniques and optical imaging presented a wide application of intraoperative GU oncologic surgery. In most cases, image-guided surgery was shown to improve the surgical resectability of tumours. Based on the evidence to date, image-guided surgery has promise in the near future for multiple GU malignancies. Further optimisation of targeted imaging agents, along with the integration of imaging modalities, is necessary to further enhance intraoperative GU oncologic surgery. Copyright © 2013 European Association of Urology. Published by Elsevier B.V. All rights reserved.

A new neural framework for visuospatial processing.

PubMed

Kravitz, Dwight J; Saleem, Kadharbatcha S; Baker, Chris I; Mishkin, Mortimer

2011-04-01

The division of cortical visual processing into distinct dorsal and ventral streams is a key framework that has guided visual neuroscience. The characterization of the ventral stream as a 'What' pathway is relatively uncontroversial, but the nature of dorsal stream processing is less clear. Originally proposed as mediating spatial perception ('Where'), more recent accounts suggest it primarily serves non-conscious visually guided action ('How'). Here, we identify three pathways emerging from the dorsal stream that consist of projections to the prefrontal and premotor cortices, and a major projection to the medial temporal lobe that courses both directly and indirectly through the posterior cingulate and retrosplenial cortices. These three pathways support both conscious and non-conscious visuospatial processing, including spatial working memory, visually guided action and navigation, respectively.

Economic theory and nursing administration research--is this a good combination?

PubMed

Jones, Terry L; Yoder, Linda

2010-01-01

Economic theory is used to describe and explain decision making in the context of scarce resources. This paper presents two applications of economic theory to the delivery of nursing services in acute care hospitals and evaluates its usefulness in guiding nursing administration research. The description of economic theory and the proposed applications for nursing are based on current nursing, healthcare, and economic literature. Evaluation of the potential usefulness of economic theory in guiding nursing administration research is based on the criteria of significance and testability as described by Fawcett and Downs. While economic theory can be very useful in explaining how decisions about nursing time allocation and nursing care production are made, it will not address the issue of how they should be made. Normative theories and ethical frameworks also must be incorporated in the decision-making process around these issues. Economic theory and nursing administration are a good fit when balanced with the values and goals of nursing.

Economic Theory and Nursing Administration Research—Is This a Good Combination?

PubMed Central

Jones, Terry L.; Yoder, Linda

2017-01-01

TOPIC Economic theory is used to describe and explain decision making in the context of scarce resources. PURPOSE This paper presents two applications of economic theory to the delivery of nursing services in acute care hospitals and evaluates its usefulness in guiding nursing administration research. SOURCES OF INFORMATION The description of economic theory and the proposed applications for nursing are based on current nursing, healthcare, and economic literature. Evaluation of the potential usefulness of economic theory in guiding nursing administration research is based on the criteria of significance and testability as described by Fawcett and Downs. CONCLUSIONS While economic theory can be very useful in explaining how decisions about nursing time allocation and nursing care production are made, it will not address the issue of how they should be made. Normative theories and ethical frameworks also must be incorporated in the decision-making process around these issues. Economic theory and nursing administration are a good fit when balanced with the values and goals of nursing. PMID:20137023

A matter of focus: Power-holders feel more responsible after adopting a cognitive other-focus, rather than a self-focus.

PubMed

Scholl, Annika; Sassenberg, Kai; Scheepers, Daan; Ellemers, Naomi; de Wit, Frank

2017-03-01

Social power implies responsibility. Yet, power-holders often follow only their own interests and overlook this responsibility. The present research illuminates how a previously adopted cognitive focus guides perceived responsibility when a person receives high (vs. low) power. In three experiments, adopting a cognitive focus on another person (vs. on the self or taking over another person's perspective) promoted perceived responsibility among individuals receiving high (but not low) power in a subsequent context. This effect was specific for perceived responsibility - a cognitive focus on another person did not change the perceived opportunity to pursue goals or the perceived relationship to an interaction partner (e.g., interpersonal closeness). While prior research examined how social values (i.e., chronically caring about others) guide responsibility among those holding power, the current findings highlight that mere cognitive processes (i.e., situationally focusing attention on others) alter perceived responsibility among those just about to receive power. © 2016 The British Psychological Society.

Computer-Aided Nodule Assessment and Risk Yield Risk Management of Adenocarcinoma: The Future of Imaging?

PubMed

Foley, Finbar; Rajagopalan, Srinivasan; Raghunath, Sushravya M; Boland, Jennifer M; Karwoski, Ronald A; Maldonado, Fabien; Bartholmai, Brian J; Peikert, Tobias

2016-01-01

Increased clinical use of chest high-resolution computed tomography results in increased identification of lung adenocarcinomas and persistent subsolid opacities. However, these lesions range from very indolent to extremely aggressive tumors. Clinically relevant diagnostic tools to noninvasively risk stratify and guide individualized management of these lesions are lacking. Research efforts investigating semiquantitative measures to decrease interrater and intrarater variability are emerging, and in some cases steps have been taken to automate this process. However, many such methods currently are still suboptimal, require validation and are not yet clinically applicable. The computer-aided nodule assessment and risk yield software application represents a validated tool for the automated, quantitative, and noninvasive tool for risk stratification of adenocarcinoma lung nodules. Computer-aided nodule assessment and risk yield correlates well with consensus histology and postsurgical patient outcomes, and therefore may help to guide individualized patient management, for example, in identification of nodules amenable to radiological surveillance, or in need of adjunctive therapy. Copyright © 2016 Elsevier Inc. All rights reserved.

CANARY Risk Management of Adenocarcinoma: The Future of Imaging?

PubMed Central

Foley, Finbar; Rajagopalan, Srinivasan; Raghunath, Sushravya M; Boland, Jennifer M; Karwoski, Ronald A.; Maldonado, Fabien; Bartholmai, Brian J; Peikert, Tobias

2016-01-01

Increased clinical utilization of chest high resolution computed tomography results in increased identification of lung adenocarcinomas and persistent sub-solid opacities. However, these lesions range from very indolent to extremely aggressive tumors. Clinically relevant diagnostic tools to non-invasively risk stratify and guide individualized management of these lesions are lacking. Research efforts investigating semi-quantitative measures to decrease inter- and intra-rater variability are emerging, and in some cases steps have been taken to automate this process. However, many such methods currently are still sub-optimal, require validation and are not yet clinically applicable. The Computer-Aided Nodule Assessment and Risk Yield (CANARY) software application represents a validated tool for the automated, quantitative, non-invasive tool for risk stratification of adenocarcinoma lung nodules. CANARY correlates well with consensus histology and post-surgical patient outcomes and therefore may help to guide individualized patient management e.g. in identification of nodules amenable to radiological surveillance, or in need of adjunctive therapy. PMID:27568149

Guidelines for the Pharmacotherapy of Schizophrenia in Adults.

PubMed

Remington, Gary; Addington, Donald; Honer, William; Ismail, Zahinoor; Raedler, Thomas; Teehan, Michael

2017-09-01

The present guidelines address the pharmacotherapy of schizophrenia in adults across different stages, phases, and symptom domains. Guidelines were developed using the ADAPTE process, which takes advantage of existing guidelines. Six guidelines were identified for adaptation, with recommendations extracted from each. For those specific to the pharmacotherapy of schizophrenia in adults, a working group selected between guidelines and recommendations to create an adapted guideline. Recommendations can be categorized into 6 areas that include 1) first-episode schizophrenia, 2) acute exacerbation, 3) relapse prevention and maintenance treatment, 4) treatment-resistant schizophrenia, 5) clozapine-resistant schizophrenia, and 6) specific symptom domains. For each category, recommendations are made based on the available evidence, which is discussed and linked to other established guidelines. In most cases, evidence-based recommendations are made that can be used to guide current clinical treatment and decision making. Notably, however, there is a paucity of established evidence to guide treatment decision making in the case of clozapine-resistant schizophrenia, a subsample that represents a sizable proportion of those with schizophrenia.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Jiang Ronglin; Fang Cheng; Shibata, Kazunari

Magnetic reconnection is a fundamental process in space and astrophysical plasmas in which the oppositely directed magnetic field changes its connectivity and eventually converts its energy into kinetic and thermal energy of the plasma. Recently, ubiquitous jets (for example, chromospheric anemone jets, penumbral microjets, umbral light bridge jets) have been observed by the Solar Optical Telescope on board the satellite Hinode. These tiny and frequently occurring jets are considered to be a possible evidence of small-scale ubiquitous reconnection in the solar atmosphere. However, the details of three-dimensional (3D) magnetic configuration are still not very clear. Here, we propose a newmore » model based on 3D simulations of magnetic reconnection using a typical current sheet magnetic configuration with a strong guide field. The most interesting feature is that the jets produced by the reconnection eventually move along the guide field lines. This model provides a fresh understanding of newly discovered ubiquitous jets and moreover a new observational basis for the theory of astrophysical magnetic reconnection.« less

Culture: The missing link in health research.

PubMed

Kagawa Singer, M; Dressler, W; George, S

2016-12-01

Culture is essential for humans to exist. Yet surprisingly little attention has been paid to identifying how culture works or developing standards to guide the application of this concept in health research. This paper describes a multidisciplinary effort to find consensus on essential elements of a definition of culture to guide researchers in studying how cultural processes influence health and health behaviors. We first highlight the lack of progress made in the health sciences to explain differences between population groups, and then identify 10 key barriers in research impeding progress in more effectively and rapidly realizing equity in health outcomes. Second, we highlight the primarily mono-cultural lens through which health behavior is currently conceptualized, third, we present a consensus definition of culture as an integrating framework, and last, we provide guidelines to more effectively operationalize the concept of culture for health research. We hope this effort will be useful to researchers, reviewers, and funders alike. Copyright © 2016 Elsevier Ltd. All rights reserved.

The Guide to Better Hospital Computer Decisions

PubMed Central

Dorenfest, Sheldon I.

1981-01-01

A soon-to-be-published major study of hospital computer use entitled “The Guide to Better Hospital Computer Decisions” was conducted by my firm over the past 2½ years. The study required over twenty (20) man years of effort at a cost of over $300,000, and the six (6) volume final report provides more than 1,000 pages of data about how hospitals are and will be using computerized medical and business information systems. It describes the current status and future expectations for computer use in major application areas, such as, but not limited to, finance, admitting, pharmacy, laboratory, data collection and hospital or medical information systems. It also includes profiles of over 100 companies and other types of organizations providing data processing products and services to hospitals. In this paper, we discuss the need for the study, the specific objectives of the study, the methodology and approach taken to complete the study and a few major conclusions.

Lexical Processing and Organization in Bilingual First Language Acquisition: Guiding Future Research

PubMed Central

DeAnda, Stephanie; Poulin-Dubois, Diane; Zesiger, Pascal; Friend, Margaret

2016-01-01

A rich body of work in adult bilinguals documents an interconnected lexical network across languages, such that early word retrieval is language independent. This literature has yielded a number of influential models of bilingual semantic memory. However, extant models provide limited predictions about the emergence of lexical organization in bilingual first language acquisition (BFLA). Empirical evidence from monolingual infants suggests that lexical networks emerge early in development as children integrate phonological and semantic information. These findings tell us little about the interaction between two languages in the early bilingual memory. To date, an understanding of when and how languages interact in early bilingual development is lacking. In this literature review, we present research documenting lexical-semantic development across monolingual and bilingual infants. This is followed by a discussion of current models of bilingual language representation and organization and their ability to account for the available empirical evidence. Together, these theoretical and empirical accounts inform and highlight unexplored areas of research and guide future work on early bilingual memory. PMID:26866430

Position statement: a clinical approach to the management of adult non-neurogenic overactive bladder.

PubMed

Chung, Eric; Lee, Dominic; Gani, Johan; Gillman, Michael; Maher, Christopher; Brennan, Janelle; Johns Putra, Lydia; Ahmad, Laura; Chan, Lewis Lw

2018-01-15

Overactive bladder (OAB) is a highly prevalent medical condition that has an adverse impact on various health-related quality-of-life domains, including a significant psychosocial and financial burden. This position statement, formulated by members of the Urological Society of Australia and New Zealand and the UroGynaecological Society of Australasia, summarises the current recommendations for clinical diagnosis and treatment strategies in patients with non-neurogenic OAB, and guides clinicians in the decision-making process for managing the condition using evidence-based medicine. Main recommendations: Diagnosis and initial management should be based on thorough clinical history, examination and basic investigations to exclude underlying treatable causes such as urinary tract infection and urological malignancy. Initial treatment strategies for OAB involve conservative management with behavioural modification and bladder retraining. Second-line management involves medical therapy using anticholinergic or β3 agonist drugs provided there is adequate assessment of bladder emptying. If medical therapy is unsuccessful, further investigations with urodynamic studies and cystourethroscopy are recommended to guide further treatment. Intravesical botulinum toxin and sacral neuromodulation should be considered in medical refractory OAB. Changes in management as a result of this statement: OAB is a constellation of urinary symptoms and is a chronic condition with a low likelihood of cure; managing patient expectations is essential because OAB is challenging to treat. At present, the exact pathogenesis of OAB remains unclear and it is likely that there are multiple factors involved in this disease complex. Current medical treatment remains far from ideal, although minimally invasive surgery can be effective. Further research into the pathophysiology of this common condition will hopefully guide future developments in disease management.

The Ottawa Model of Research Use: a guide to clinical innovation in the NICU.

PubMed

Hogan, Debora L; Logan, Jo

2004-01-01

To improve performance of a neonatal transport team by implementing a research-based family assessment instrument. Objectives included providing a structure for evaluating families and fostering the healthcare relationship. Neonatal transports are associated with family crises. Transport teams require a comprehensive framework to accurately assess family responses to adversity and tools to guide their practice toward parental mastery of the event. Currently, there are no assessment tools that merge family nursing expertise with neonatal transport. A family assessment tool grounded in contemporary family nursing theory and research was developed by a clinical nurse specialist. The Ottawa Model of Research Use guided the process of piloting the innovation with members of a transport team. Focus groups, interviews, and surveys were conducted to create profiles of barriers and facilitators to research use by team members. Tailored research transfer strategies were enacted based on the profile results. Formative evaluations demonstrated improvements in team members' perceptions of their knowledge, family centeredness, and ability to assess and intervene with families. The family assessment tool is currently being incorporated into Clinical Practice Guidelines for Transport and thus will be considered standard care. Use of a family assessment tool is an effective way of appraising families and addressing suffering. The Ottawa Model of Research Use provided a framework for implementing the clinical innovation. A key role of the clinical nurse specialist is to influence nursing practice by fostering research use by practitioners. When developing and implementing a clinical innovation, input from end users and consumers is pivotal. Incorporating the innovation into a practice guideline provides a structure to imbed research evidence into practice.

Positron Emission Tomography Image-Guided Drug Delivery: Current Status and Future Perspectives

PubMed Central

2015-01-01

Positron emission tomography (PET) is an important modality in the field of molecular imaging, which is gradually impacting patient care by providing safe, fast, and reliable techniques that help to alter the course of patient care by revealing invasive, de facto procedures to be unnecessary or rendering them obsolete. Also, PET provides a key connection between the molecular mechanisms involved in the pathophysiology of disease and the according targeted therapies. Recently, PET imaging is also gaining ground in the field of drug delivery. Current drug delivery research is focused on developing novel drug delivery systems with emphasis on precise targeting, accurate dose delivery, and minimal toxicity in order to achieve maximum therapeutic efficacy. At the intersection between PET imaging and controlled drug delivery, interest has grown in combining both these paradigms into clinically effective formulations. PET image-guided drug delivery has great potential to revolutionize patient care by in vivo assessment of drug biodistribution and accumulation at the target site and real-time monitoring of the therapeutic outcome. The expected end point of this approach is to provide fundamental support for the optimization of innovative diagnostic and therapeutic strategies that could contribute to emerging concepts in the field of “personalized medicine”. This review focuses on the recent developments in PET image-guided drug delivery and discusses intriguing opportunities for future development. The preclinical data reported to date are quite promising, and it is evident that such strategies in cancer management hold promise for clinically translatable advances that can positively impact the overall diagnostic and therapeutic processes and result in enhanced quality of life for cancer patients. PMID:24865108

Photosensitive adhesive bonding process of magnetooptic waveguides with Si guiding layer for optical nonreciprocal devices

NASA Astrophysics Data System (ADS)

Choowitsakunlert, Salinee; Takagiwa, Kenji; Kobashigawa, Takuya; Hosoya, Nariaki; Silapunt, Rardchawadee; Yokoi, Hideki

2018-05-01

A photosensitive adhesive bonding process for a magnetooptic waveguide for an optical isolator employing a nonreciprocal guided-radiation mode conversion is investigated at 1.55 µm. The magnetooptic waveguide is a straight rib type, and it is fabricated by bonding the Si guiding layer to a magnetic garnet. In the fabrication process, an adhesive material is diluted to obtain a certain thickness before depositing on a silicon-on-insulator (SOI) substrate. The relationship between the percent dilution ratio and the thickness of the adhesive layer is considered. The smallest gap thickness is found to be 0.66 µm at a dilution ratio of 2%.

MMS Observations of Large Guide Field Symmetric Reconnection Between Colliding Reconnection Jets at the Center of a Magnetic Flux Rope at the Magnetopause

NASA Technical Reports Server (NTRS)

Oieroset, M.; Phan, T. D.; Haggerty, C.; Shay, M. A.; Eastwood, J. P.; Gershman, D. J.; Drake, J. F.; Fujimoto, M.; Ergun, R. E.; Mozer, F. S.;

MMS observations of large guide field symmetric reconnection between colliding reconnection jets at the center of a magnetic flux rope at the magnetopause

NASA Astrophysics Data System (ADS)

Øieroset, M.; Phan, T. D.; Haggerty, C.; Shay, M. A.; Eastwood, J. P.; Gershman, D. J.; Drake, J. F.; Fujimoto, M.; Ergun, R. E.; Mozer, F. S.; Oka, M.; Torbert, R. B.; Burch, J. L.; Wang, S.; Chen, L. J.; Swisdak, M.; Pollock, C.; Dorelli, J. C.; Fuselier, S. A.; Lavraud, B.; Giles, B. L.; Moore, T. E.; Saito, Y.; Avanov, L. A.; Paterson, W.; Strangeway, R. J.; Russell, C. T.; Khotyaintsev, Y.; Lindqvist, P. A.; Malakit, K.

2016-06-01

We report evidence for reconnection between colliding reconnection jets in a compressed current sheet at the center of a magnetic flux rope at Earth's magnetopause. The reconnection involved nearly symmetric inflow boundary conditions with a strong guide field of two. The thin (2.5 ion-skin depth (di) width) current sheet (at ~12 di downstream of the X line) was well resolved by MMS, which revealed large asymmetries in plasma and field structures in the exhaust. Ion perpendicular heating, electron parallel heating, and density compression occurred on one side of the exhaust, while ion parallel heating and density depression were shifted to the other side. The normal electric field and double out-of-plane (bifurcated) currents spanned almost the entire exhaust. These observations are in good agreement with a kinetic simulation for similar boundary conditions, demonstrating in new detail that the structure of large guide field symmetric reconnection is distinctly different from antiparallel reconnection.

MMS observations of large guide field symmetric reconnection between colliding reconnection jets at the center of a magnetic flux rope at the magnetopause

NASA Astrophysics Data System (ADS)

Oieroset, M.; Phan, T.; Haggerty, C. C.; Shay, M. A.; Eastwood, J. P.; Gershman, D. J.; Drake, J. F.; Fujimoto, M.; Ergun, R.; Mozer, F.; Oka, M.; Torbert, R. B.; Burch, J. L.; Wang, S.; Chen, L. J.; Swisdak, M.; Pollock, C.; Dorelli, J.; Fuselier, S. A.; Lavraud, B.; Giles, B. L.; Moore, T. E.; Saito, Y.; Avanov, L. A.; Paterson, W. R.; Strangeway, R. J.; Russell, C. T.; Khotyaintsev, Y. V.; Lindqvist, P. A.; Malakit, K.

2016-12-01

We report evidence for reconnection between colliding reconnection jets in a compressed current sheet at the center of a magnetic flux rope at Earth's magnetopause. The reconnection involved nearly symmetric inflow boundary conditions with a strong guide field of two. The thin (2.5 ion-skin depth (di) width) current sheet (at 12 di downstream of the X line) was well resolved by Magnetospheric Multiscale, which revealed large asymmetries in plasma and field structures in the exhaust. Ion perpendicular heating, electron parallel heating, and density compression occurred on one side of the exhaust, while ion parallel heating and density depression were shifted to the other side. The normal electric field and double out-of-plane (bifurcated) currents spanned almost the entire exhaust. These observations are in good agreement with a kinetic simulation for similar boundary conditions, demonstrating in new detail that the structure of large guide field symmetric reconnection is distinctly different from antiparallel reconnection.

Electromagnetic dissipation during asymmetric reconnection with a moderate guide field

NASA Astrophysics Data System (ADS)

Genestreti, Kevin; Burch, James; Cassak, Paul; Torbert, Roy; Phan, Tai; Ergun, Robert; Giles, Barbara; Russell, Chris; Wang, Shan; Akhavan-Tafti, Mojtaba; Varsani, Ali

2017-04-01

We calculate the work done on the plasma by the electromagnetic (EM) field, ⃗Jṡ⃗E', and analyze the related electron currents and electric fields, focusing on a single asymmetric guide field electron diffusion region (EDR) event observed by MMS on 8 December 2015. For this event, each of the four MMS spacecraft observed dissipation of EM energy at the in-plane magnetic null point, though large-scale generation/dissipation was observed inconsistently on the magnetospheric side of the boundary. The current at the null was carried by a beam-like population of magnetosheath electrons traveling anti-parallel to the guide field, whereas the current on the Earthward side of the boundary was carried by crescent-shaped electron distributions. We also analyze the terms in Ohm's law, finding a large residual electric field throughout the EDR, inertial and pressure divergence fields at the null, and pressure divergence fields at the magnetosphere-side EDR. Our analysis of the terms in Ohm's law suggests that the EDR had significant three-dimensional structure.

Parent Management Training-Oregon Model (PMTO™) in Mexico City: Integrating Cultural Adaptation Activities in an Implementation Model

PubMed Central

Baumann, Ana A.; Domenech Rodríguez, Melanie M.; Amador, Nancy G.; Forgatch, Marion S.; Parra-Cardona, J. Rubén

2015-01-01

This article describes the process of cultural adaptation at the start of the implementation of the Parent Management Training intervention-Oregon model (PMTO) in Mexico City. The implementation process was guided by the model, and the cultural adaptation of PMTO was theoretically guided by the cultural adaptation process (CAP) model. During the process of the adaptation, we uncovered the potential for the CAP to be embedded in the implementation process, taking into account broader training and economic challenges and opportunities. We discuss how cultural adaptation and implementation processes are inextricably linked and iterative and how maintaining a collaborative relationship with the treatment developer has guided our work and has helped expand our research efforts, and how building human capital to implement PMTO in Mexico supported the implementation efforts of PMTO in other places in the United States. PMID:26052184

Parent Management Training-Oregon Model (PMTO™) in Mexico City: Integrating Cultural Adaptation Activities in an Implementation Model.

PubMed

Baumann, Ana A; Domenech Rodríguez, Melanie M; Amador, Nancy G; Forgatch, Marion S; Parra-Cardona, J Rubén

2014-03-01

This article describes the process of cultural adaptation at the start of the implementation of the Parent Management Training intervention-Oregon model (PMTO) in Mexico City. The implementation process was guided by the model, and the cultural adaptation of PMTO was theoretically guided by the cultural adaptation process (CAP) model. During the process of the adaptation, we uncovered the potential for the CAP to be embedded in the implementation process, taking into account broader training and economic challenges and opportunities. We discuss how cultural adaptation and implementation processes are inextricably linked and iterative and how maintaining a collaborative relationship with the treatment developer has guided our work and has helped expand our research efforts, and how building human capital to implement PMTO in Mexico supported the implementation efforts of PMTO in other places in the United States.

A Guide to MERLIN.

ERIC Educational Resources Information Center

Pennsylvania State Dept. of Education, Harrisburg.

The guide describes the mission, objective, and function of the Migrant Education Resources List and Information Network (MERLIN) and defines the scopes of interest currently identified as national priorities in migrant education. MERLIN is a federally funded project designed to improve interstate and intrastate coordination of migrant education…

14 CFR 1216.302 - Responsibilities.

Code of Federal Regulations, 2013 CFR

2013-01-01

... overseeing and guiding NASA's integration of NEPA into the Agency's planning and decision making. The SEO... Agency planning and decision-making processes. The SEO shall monitor this process to ensure that these... functions and guiding NASA's integration of NEPA into the Agency's planning and decision making for all NASA...

The School Official's Guide to Student Disciplinary Hearings.

ERIC Educational Resources Information Center

Cartwright, Gene J.; Schwartz, Allen D.

This guide to student disciplinary hearings provides an understanding of procedures and options during the student suspension or expulsion process through the perspectives of the different participants. Section 1, "Why Hearings?" discusses due process and the three categories of student disciplinary hearings: pre-suspension, suspension, and…

America's Women of Color: Integrating Cultural Diversity into Non-Sex-Biased Curricula. Filmstrip User's Guide for La Mujer Hispana: Mito y Realidad (The Hispanic Woman: Myth and Reality).

ERIC Educational Resources Information Center

Saint Paul Public Schools, MN.

This document is one of five filmstrip users' guides that can be used to increase understanding of minority women in the United States by supplying basic information on their histories, current concerns, myths, and misleading stereotypes. The guide was designed to be used with a filmstrip entitled "La Mujer Hispana: Mito y Realidad (The…

The levels of processing effect under nitrogen narcosis.

PubMed

Kneller, Wendy; Hobbs, Malcolm

2013-01-01

Previous research has consistently demonstrated that inert gas (nitrogen) narcosis affects free recall but not recognition memory in the depth range of 30 to 50 meters of sea water (msw), possibly as a result of narcosis preventing processing when learned material is encoded. The aim of the current research was to test this hypothesis by applying a levels of processing approach to the measurement of free recall under narcosis. Experiment 1 investigated the effect of depth (0-2 msw vs. 37-39 msw) and level of processing (shallow vs. deep) on free recall memory performance in 67 divers. When age was included as a covariate, recall was significantly worse in deep water (i.e., under narcosis), compared to shallow water, and was significantly higher in the deep processing compared to shallow processing conditions in both depth conditions. Experiment 2 demonstrated that this effect was not simply due to the different underwater environments used for the depth conditions in Experiment 1. It was concluded memory performance can be altered by processing under narcosis and supports the contention that narcosis affects the encoding stage of memory as opposed to self-guided search (retrieval).

Health technology assessment in Saudi Arabia.

PubMed

Al-Aqeel, Sinaa

2018-05-16

The Saudi government, similar to any other government, is committed to making public spending more efficient, using resources more effectively, and limiting waste. Health technology assessment (HTA) is a tool that informs policy and decision makers regarding the formulation of safe and effective policies that are patient-focused and help to achieve efficiency when allocating limited health-care resources. Areas covered: After a brief description of HTA in the international context, this review provides a brief introduction to Saudi Arabia's health-care system, followed by a delineation of the decision maker(s) and influencers and the decision-making process for pricing and reimbursement. The article then discusses the current status of HTA in Saudi Arabia and proposes four strategic objectives that can form the first step in the development of a formal HTA process. Expert commentary: In Saudi Arabia, facilitators for incorporating HTA into the decision-making process exist. Future local research is needed to guide the implementation of full HTA.

The NASA Physics of the Cosmos Program

NASA Astrophysics Data System (ADS)

Bock, Jamie

2015-04-01

The NASA Physics of the Cosmos program is a portfolio of space-based investigations for studying fundamental processes in the universe. Areas of focus include: probing the physical process of inflation associated with the birth of the universe, studying the nature of the dark energy that dominates the mass-energy of the modern universe, advancing new ways to observe the universe through gravitational-wave astronomy, studying the universe in X-rays and gamma rays to probe energetic astrophysical processes and to study the formation and behavior of black holes in strong gravity, and determining the energetic origins and history of cosmic rays. The program is supported by an analysis group called the PhysPAG that serves as a forum for community input and analysis. Space offers unique advantages for these exciting investigations, and the program seeks to guide the development of future space missions through observations from current facilities, and by formulating new technologies and capabilities.

Facilitating Learning in SPI through Co-design

NASA Astrophysics Data System (ADS)

Seigerroth, Ulf; Lind, Mikael

Information system development (ISD) is not a stable discipline. On the contrary, ISD must constantly cope with rapidly changing and diversifying technologies, application domains, and organizational contexts [14]. ISD is a complex and a multi dimensional phenomenon [5, 15]. As a consequence of this. Software Process Improvement (SPI) can also be regarded as a complex and multi dimensional phenomenon [16]. Problems that are accentuated in relation to SPI are: SPI is in its current shape a quite young discipline [15], there is a sparse amount of SPI-theories that can guide SPI initiatives [19], SPI-initiatives often focus on the system development (SD)-process, methods and tools which is a narrow focus that leave out important aspects such as business orientation [6], organization and social factors [4, 5] and the learning process [19]. Arguments have therefore been raised that there is a need for both researchers and practitioners to better understand SD-organisations and their practice [5].

People, Animals and the Environment: An Educational Simulation Game. Teacher's Guide and Student Guide.

ERIC Educational Resources Information Center

American Animal Welfare Foundation, St. Paul, MN.

This document consists of a teacher guide and a student guide to an educational simulation game that provides students with an opportunity to examine the relationship between humans and animals, and to explore the roles that animals play in daily life. The teaching technique employed is a student-centered process in which students work…

A Tradition of Caring: A Guide for Assessing Families for Kinship Care. Assessment Guide.

ERIC Educational Resources Information Center

Child Welfare League of America, Inc., Washington, DC.

This guide was developed to help child welfare professionals design an effective strength-base process for working mutually with kinship families to assess their ability and willingness to provide care for a relative child in their home. The guide, designed for use with an accompanying curriculum, is organized into four parts. Part 1 introduces…

Contingency Contracting Customer Guide

DTIC Science & Technology

1996-12-01

I CONTINGENCY CONTRACTING CUSTOMER GUIDE PROJECT NUMBER: LC9619100 PROJECT MANAGER: CAPT TOM SNYDER TEAM MEMBERS MAJ JOHN PERRY CAPT ROBBIN VAUGHN...Report 4. TITLE AND SUBTITLE 5. FUNDING NUMBERS Contracting Deployment Customer Guide 6. AUTHOR(S) Capt.Thomas J. Snyder, AFLMA/LGC, DSN 596-4085 7...individual customers on the process, the customer support guide provides the necessary explanations without straining valuable manpower resources. The

Envisioning Arts Assessment: A Process Guide for Assessing Arts Education in School Districts and States.

ERIC Educational Resources Information Center

Pistone, Nancy

This handbook is a guide to help educators and administrators with the decisions they face in the design of an arts assessment. The guide is divided into two broad parts: Part 1: "Background for Thoughtful Arts Education Assessment"; and Part 2: "Assessment Design in Action." The guide includes: (1) a brief background on the…

The role of replay and theta sequences in mediating hippocampal-prefrontal interactions for memory and cognition.

PubMed

Zielinski, Mark C; Tang, Wenbo; Jadhav, Shantanu P

2017-12-18

Sequential activity is seen in the hippocampus during multiple network patterns, prominently as replay activity during both awake and sleep sharp-wave ripples (SWRs), and as theta sequences during active exploration. Although various mnemonic and cognitive functions have been ascribed to these hippocampal sequences, evidence for these proposed functions remains primarily phenomenological. Here, we briefly review current knowledge about replay events and theta sequences in spatial memory tasks. We reason that in order to gain a mechanistic and causal understanding of how these patterns influence memory and cognitive processing, it is important to consider how these sequences influence activity in other regions, and in particular, the prefrontal cortex, which is crucial for memory-guided behavior. For spatial memory tasks, we posit that hippocampal-prefrontal interactions mediated by replay and theta sequences play complementary and overlapping roles at different stages in learning, supporting memory encoding and retrieval, deliberative decision making, planning, and guiding future actions. This framework offers testable predictions for future physiology and closed-loop feedback inactivation experiments for specifically targeting hippocampal sequences as well as coordinated prefrontal activity in different network states, with the potential to reveal their causal roles in memory-guided behavior. © 2017 Wiley Periodicals, Inc.

Optimizing patient treatment decisions in an era of rapid technological advances: the case of hepatitis C treatment.

PubMed

Liu, Shan; Brandeau, Margaret L; Goldhaber-Fiebert, Jeremy D

2017-03-01

How long should a patient with a treatable chronic disease wait for more effective treatments before accepting the best available treatment? We develop a framework to guide optimal treatment decisions for a deteriorating chronic disease when treatment technologies are improving over time. We formulate an optimal stopping problem using a discrete-time, finite-horizon Markov decision process. The goal is to maximize a patient's quality-adjusted life expectancy. We derive structural properties of the model and analytically solve a three-period treatment decision problem. We illustrate the model with the example of treatment for chronic hepatitis C virus (HCV). Chronic HCV affects 3-4 million Americans and has been historically difficult to treat, but increasingly effective treatments have been commercialized in the past few years. We show that the optimal treatment decision is more likely to be to accept currently available treatment-despite expectations for future treatment improvement-for patients who have high-risk history, who are older, or who have more comorbidities. Insights from this study can guide HCV treatment decisions for individual patients. More broadly, our model can guide treatment decisions for curable chronic diseases by finding the optimal treatment policy for individual patients in a heterogeneous population.

Optimizing Patient Treatment Decisions in an Era of Rapid Technological Advances: The Case of Hepatitis C Treatment

PubMed Central

Liu, Shan; Goldhaber-Fiebert, Jeremy D.; Brandeau, Margaret L.

2015-01-01

How long should a patient with a treatable chronic disease wait for more effective treatments before accepting the best available treatment? We develop a framework to guide optimal treatment decisions for a deteriorating chronic disease when treatment technologies are improving over time. We formulate an optimal stopping problem using a discrete-time, finite-horizon Markov decision process. The goal is to maximize a patient’s quality-adjusted life expectancy. We derive structural properties of the model and analytically solve a three-period treatment decision problem. We illustrate the model with the example of treatment for chronic hepatitis C virus (HCV). Chronic HCV affects 3–4 million Americans and has been historically difficult to treat, but increasingly effective treatments have been commercialized in the past few years. We show that the optimal treatment decision is more likely to be to accept currently available treatment—despite expectations for future treatment improvement—for patients who have high-risk history, who are older, or who have more comorbidities. Insights from this study can guide HCV treatment decisions for individual patients. More broadly, our model can guide treatment decisions for curable chronic diseases by finding the optimal treatment policy for individual patients in a heterogeneous population. PMID:26188961

Guided exploration in virtual environments

NASA Astrophysics Data System (ADS)

Beckhaus, Steffi; Eckel, Gerhard; Strothotte, Thomas

2001-06-01

We describe an application supporting alternating interaction and animation for the purpose of exploration in a surround- screen projection-based virtual reality system. The exploration of an environment is a highly interactive and dynamic process in which the presentation of objects of interest can give the user guidance while exploring the scene. Previous systems for automatic presentation of models or scenes need either cinematographic rules, direct human interaction, framesets or precalculation (e.g. precalculation of paths to a predefined goal). We report on the development of a system that can deal with rapidly changing user interest in objects of a scene or model as well as with dynamic models and changes of the camera position introduced interactively by the user. It is implemented as a potential-field based camera data generating system. In this paper we describe the implementation of our approach in a virtual art museum on the CyberStage, our surround-screen projection-based stereoscopic display. The paradigm of guided exploration is introduced describing the freedom of the user to explore the museum autonomously. At the same time, if requested by the user, guided exploration provides just-in-time navigational support. The user controls this support by specifying the current field of interest in high-level search criteria. We also present an informal user study evaluating this approach.

OPSO - The OpenGL based Field Acquisition and Telescope Guiding System

NASA Astrophysics Data System (ADS)

Škoda, P.; Fuchs, J.; Honsa, J.

2006-07-01

We present OPSO, a modular pointing and auto-guiding system for the coudé spectrograph of the Ondřejov observatory 2m telescope. The current field and slit viewing CCD cameras with image intensifiers are giving only standard TV video output. To allow the acquisition and guiding of very faint targets, we have designed an image enhancing system working in real time on TV frames grabbed by BT878-based video capture card. Its basic capabilities include the sliding averaging of hundreds of frames with bad pixel masking and removal of outliers, display of median of set of frames, quick zooming, contrast and brightness adjustment, plotting of horizontal and vertical cross cuts of seeing disk within given intensity range and many more. From the programmer's point of view, the system consists of three tasks running in parallel on a Linux PC. One C task controls the video capturing over Video for Linux (v4l2) interface and feeds the frames into the large block of shared memory, where the core image processing is done by another C program calling the OpenGL library. The GUI is, however, dynamically built in Python from XML description of widgets prepared in Glade. All tasks are exchanging information by IPC calls using the shared memory segments.