Aviation Environmental Design Tool (AEDT) version 2b, user guide

DOT National Transportation Integrated Search

2016-06-09

The Federal Aviation Administration, Office of Environment and Energy (FAA-AEE) has developed the Aviation Environmental Design Tool (AEDT) version 2b software system with the support of the following development team: FAA, National Aeronautics and S...

Aviation Environmental Design Tool (AEDT) user guide version 2a

DOT National Transportation Integrated Search

2014-01-23

The Federal Aviation Administration, Office of Environment and Energy (FAA-AEE) has developed the Aviation : Environmental Design Tool (AEDT) version 2a software system with the support of the following development team: : FAA, National Aeronautics a...

Fairbanks North Star borough rural roads upgrade inventory and cost estimation software user guide : version I.

DOT National Transportation Integrated Search

2013-04-01

The Rural Road Upgrade Inventory and Cost Estimation Software is designed by the AUTC : research team to help the Fairbanks North Star Borough (FNSB) estimate the cost of upgrading : rural roads located in the Borough's Service Areas. The Software pe...

Globus Quick Start Guide. Globus Software Version 1.1

NASA Technical Reports Server (NTRS)

1999-01-01

The Globus Project is a community effort, led by Argonne National Laboratory and the University of Southern California's Information Sciences Institute. Globus is developing the basic software infrastructure for computations that integrate geographically distributed computational and information resources.

Aviation Environmental Design Tool (AEDT) AEDT Standard Input File (ASIF) reference guide version 2a

DOT National Transportation Integrated Search

2014-01-01

The Federal Aviation Administration, Office of Environment and Energy (FAA-AEE) has developed the Aviation : Environmental Design Tool (AEDT) version 2a software system with the support of the following development team: : FAA, National Aeronautics a...

Advanced communications technology satellite high burst rate link evaluation terminal power control and rain fade software test plan, version 1.0

NASA Technical Reports Server (NTRS)

Reinhart, Richard C.

1993-01-01

The Power Control and Rain Fade Software was developed at the NASA Lewis Research Center to support the Advanced Communications Technology Satellite High Burst Rate Link Evaluation Terminal (ACTS HBR-LET). The HBR-LET is an experimenters terminal to communicate with the ACTS for various experiments by government, university, and industry agencies. The Power Control and Rain Fade Software is one segment of the Control and Performance Monitor (C&PM) Software system of the HBR-LET. The Power Control and Rain Fade Software automatically controls the LET uplink power to compensate for signal fades. Besides power augmentation, the C&PM Software system is also responsible for instrument control during HBR-LET experiments, control of the Intermediate Frequency Switch Matrix on board the ACTS to yield a desired path through the spacecraft payload, and data display. The Power Control and Rain Fade Software User's Guide, Version 1.0 outlines the commands and procedures to install and operate the Power Control and Rain Fade Software. The Power Control and Rain Fade Software Maintenance Manual, Version 1.0 is a programmer's guide to the Power Control and Rain Fade Software. This manual details the current implementation of the software from a technical perspective. Included is an overview of the Power Control and Rain Fade Software, computer algorithms, format representations, and computer hardware configuration. The Power Control and Rain Fade Test Plan provides a step-by-step procedure to verify the operation of the software using a predetermined signal fade event. The Test Plan also provides a means to demonstrate the capability of the software.

GEMPAK5 user's guide, version 5.0

NASA Technical Reports Server (NTRS)

Desjardins, Mary L.; Brill, Keith F.; Schotz, Steven S.

1991-01-01

GEMPAK is a general meteorological software package used to analyze and display conventional meteorological data as well as satellite derived parameters. The User's Guide describes the GEMPAK5 programs and input parameters and details the algorithms used for the meteorological computations.

GEMPAK5. Part 2: GEMPLT programmer's guide, version 5.0

NASA Technical Reports Server (NTRS)

Desjardins, Mary L.; Brill, Keith F.; Schotz, Steven S.

1991-01-01

GEMPAK is a general meteorological software package used to analyze and display conventional meteorological data as well as satellite derived parameters. The GEMPAK Programmer's Guide describes the subroutines which can be used in the GEMPAK graphics and transformation subsystem, GEMPLT.

Aviation Environmental Design Tool (AEDT): Version 2c Service pack 1: AEDT Standard Input File (ASIF) Reference Guide

DOT National Transportation Integrated Search

2016-12-01

The Federal Aviation Administration, Office of Environment and Energy (FAA-AEE) has developed the Aviation Environmental Design Tool (AEDT) version 2c software system with the support of the following development team: FAA, National Aeronautics and S...

GEMPAK5. Part 1: GEMPAK5 programmer's guide, version 5.0

NASA Technical Reports Server (NTRS)

Desjardins, Mary L.; Brill, Keith F.; Schotz, Steven S.

1991-01-01

GEMPAK is a general meteorological software package used to analyze and display conventional meteorological data as well as satellite derived parameters. The Programmer's Guide describes the subroutines which can be used to build new GEMPAK programs. Part 1 contains GEMPAK subroutines.

Educational interactive multimedia software: The impact of interactivity on learning

NASA Astrophysics Data System (ADS)

Reamon, Derek Trent

This dissertation discusses the design, development, deployment and testing of two versions of educational interactive multimedia software. Both versions of the software are focused on teaching mechanical engineering undergraduates about the fundamentals of direct-current (DC) motor physics and selection. The two versions of Motor Workshop software cover the same basic materials on motors, but differ in the level of interactivity between the students and the software. Here, the level of interactivity refers to the particular role of the computer in the interaction between the user and the software. In one version, the students navigate through information that is organized by topic, reading text, and viewing embedded video clips; this is referred to as "low-level interactivity" software because the computer simply presents the content. In the other version, the students are given a task to accomplish---they must design a small motor-driven 'virtual' vehicle that competes against computer-generated opponents. The interaction is guided by the software which offers advice from 'experts' and provides contextual information; we refer to this as "high-level interactivity" software because the computer is actively participating in the interaction. The software was used in two sets of experiments, where students using the low-level interactivity software served as the 'control group,' and students using the highly interactive software were the 'treatment group.' Data, including pre- and post-performance tests, questionnaire responses, learning style characterizations, activity tracking logs and videotapes were collected for analysis. Statistical and observational research methods were applied to the various data to test the hypothesis that the level of interactivity effects the learning situation, with higher levels of interactivity being more effective for learning. The results show that both the low-level and high-level interactive versions of the software were effective in promoting learning about the subject of motors. The focus of learning varied between users of the two versions, however. The low-level version was more effective for teaching concepts and terminology, while the high-level version seemed to be more effective for teaching engineering applications.

Federal Emergency Management Information System (FEMIS) system administration guide. Version 1.2

DOE Office of Scientific and Technical Information (OSTI.GOV)

Burford, M.J.; Burnett, R.A.; Curtis, L.M.

The Federal Emergency Management Information System (FEMIS) is an emergency management planning and analysis tool that is being developed under the direction of the US Army Chemical biological Defense Command. The FEMIS System Administration Guide defines FEMIS hardware and software requirements and gives instructions for installing the FEMIS system package. System administrators, database administrators, and general users can use this guide to install, configure, and maintain the FEMIS client software package. This document provides a description of the FEMIS environment; distribution media; data, communications, and electronic mail servers; user workstations; and system management.

Structural dynamics payload loads estimates: User guide

NASA Technical Reports Server (NTRS)

Shanahan, T. G.; Engels, R. C.

1982-01-01

This User Guide with an overview of an integration scheme to determine the response of a launch vehicle with multiple payloads. Chapter II discusses the software package associated with the integration scheme together with several sample problems. A short cut version of the integration technique is also discussed. The Guide concludes with a list of references and the listings of the subroutines.

USER'S GUIDE FOR GLOED VERSION 1.0 - THE GLOBAL EMISSIONS DATABASE

EPA Science Inventory

The document is a user's guide for the EPA-developed, powerful software package, Global Emissions Database (GloED). GloED is a user-friendly, menu-driven tool for storing and retrieving emissions factors and activity data on a country-specific basis. Data can be selected from dat...

Software design and documentation language: User's guide for SDDL release 4

NASA Technical Reports Server (NTRS)

Zepko, T. M.

1981-01-01

The changes introduced in the PASCAL implementation of the software design and documentation language are described. These changes include a number of new capabilities, plus some changes to make the language more consistent and easier to use. Incompatibilities with earlier versions are limited to certain of the directive statements.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Malczynski, Leonard A.

This guide addresses software quality in the construction of Powersim{reg_sign} Studio 8 system dynamics simulation models. It is the result of almost ten years of experience with the Powersim suite of system dynamics modeling tools (Constructor and earlier Studio versions). It is a guide that proposes a common look and feel for the construction of Powersim Studio system dynamics models.

METAPHOR: Programmer's guide, Version 1

NASA Technical Reports Server (NTRS)

Furchtgott, D. G.

1979-01-01

The internal structure of the Michigan Evaluation Aid for Perphormability (METAPHOR), an interactive software package to facilitate performability modeling and evaluation is described. Revised supplemented guides are prepared in order to maintain an up-to-date documentation of the system. Programmed tools to facilitate each step of performability model construction and model solution are given.

GSOSTATS Database: USAF Synchronous Satellite Catalog Data Conversion Software. User's Guide and Software Maintenance Manual, Version 2.1

NASA Technical Reports Server (NTRS)

Mallasch, Paul G.; Babic, Slavoljub

1994-01-01

The United States Air Force (USAF) provides NASA Lewis Research Center with monthly reports containing the Synchronous Satellite Catalog and the associated Two Line Mean Element Sets. The USAF Synchronous Satellite Catalog supplies satellite orbital parameters collected by an automated monitoring system and provided to Lewis Research Center as text files on magnetic tape. Software was developed to facilitate automated formatting, data normalization, cross-referencing, and error correction of Synchronous Satellite Catalog files before loading into the NASA Geosynchronous Satellite Orbital Statistics Database System (GSOSTATS). This document contains the User's Guide and Software Maintenance Manual with information necessary for installation, initialization, start-up, operation, error recovery, and termination of the software application. It also contains implementation details, modification aids, and software source code adaptations for use in future revisions.

GEOSAT Follow-On (GFO) Altimeter Document Series. Volume 5; Version 1; GFO Radar Altimeter Processing at Wallops Flight Facility

NASA Technical Reports Server (NTRS)

Lockwood, Dennis W.; Conger, A. M.

2003-01-01

This document is a compendium of the WFF GFO Software Development Team's knowledge regarding of GDO CAL/VAL Data. It includes many elements of a requirements document, a software specification document, a software design document, and a user's guide. In the more technical sections, this document assumes the reader is familiar with GFO and its CAL/VAL Data.

FINDS: A fault inferring nonlinear detection system programmers manual, version 3.0

NASA Technical Reports Server (NTRS)

Lancraft, R. E.

1985-01-01

Detailed software documentation of the digital computer program FINDS (Fault Inferring Nonlinear Detection System) Version 3.0 is provided. FINDS is a highly modular and extensible computer program designed to monitor and detect sensor failures, while at the same time providing reliable state estimates. In this version of the program the FINDS methodology is used to detect, isolate, and compensate for failures in simulated avionics sensors used by the Advanced Transport Operating Systems (ATOPS) Transport System Research Vehicle (TSRV) in a Microwave Landing System (MLS) environment. It is intended that this report serve as a programmers guide to aid in the maintenance, modification, and revision of the FINDS software.

Computerized Placement Management Software (CPMS): User Manual, Version 3.0.

ERIC Educational Resources Information Center

College Entrance Examination Board, Princeton, NJ.

This guide is designed to enable the beginner, as well as the advanced user, to understand and use the Computerized Placement Management Software (CPMS). The CPMS is a system for evaluating information about students and recommending their placement into courses best suited for them. It also tracks their progress and maintains their records. The…

Software for Optical Archive and Retrieval (SOAR) user's guide, version 4.2

NASA Technical Reports Server (NTRS)

Davis, Charles

1991-01-01

The optical disk is an emerging technology. Because it is not a magnetic medium, it offers a number of distinct advantages over the established form of storage, advantages that make it extremely attractive. They are as follows: (1) the ability to store much more data within the same space; (2) the random access characteristics of the Write Once Read Many optical disk; (3) a much longer life than that of traditional storage media; and (4) much greater data access rate. Software for Optical Archive and Retrieval (SOAR) user's guide is presented.

Turbo FRMAC 2016 v. 7.3.0

DOE Office of Scientific and Technical Information (OSTI.GOV)

Madrid, Gregory J.; Whitener, Dustin Heath; Folz, Wesley

2017-05-27

The Turbo FRMAC (TF) software program is the software implementation of the science and methodologies utilized in the Federal Radiological Monitoring and Assessment Center (FRMAC). The software automates the calculations described in volumes 1 of "The Federal Manual for Assessing Environmental Data during a Radiological Emergency" (2015 version). In the event of the intentional or accidental release of radioactive material, the software is used to guide and govern the response of the Federal, State, Local, and Tribal governments. The manual, upon which the software is based, is unclassified and freely available on the Internet.

Turbo FRMAC 2018

DOE Office of Scientific and Technical Information (OSTI.GOV)

Fulton, John; Gallagher, Linda; Gonzales, Alejandro

The Turbo FRMAC (TF) software program is the software implementation of the science and methodologies utilized in the Federal Radiological Monitoring and Assessment Center (FRMAC). The software automates the calculations described in volumes 1 of "The Federal Manual for Assessing Environmental Data during a Radiological Emergency" (2015 version). In the event of the intentional or accidental release of radioactive material, the software is used to guide and govern the response of the Federal, State, Local, and Tribal governments. The manual, upon which the software is based, is unclassified and freely available on the Internet.

Turbo FRMAC 2016 v. 7.2.0

DOE Office of Scientific and Technical Information (OSTI.GOV)

Madrid, Gregory J.; Whitener, Dustin Heath; Folz, Wesley

2017-02-27

The Turbo FRMAC (TF) software program is the software implementation of the science and methodologies utilized in the Federal Radiological Monitoring and Assessment Center (FRMAC). The software automates the calculations described in volumes 1 of "The Federal Manual for Assessing Environmental Data during a Radiological Emergency" (2015 version). In the event of the intentional or accidental release of radioactive material, the software is used to guide and govern the response of the Federal, State, Local, and Tribal governments. The manual, upon which the software is based, is unclassified and freely available on the Internet.

Aviation Environmental Design Tool (AEDT): Version 2d: Installation Guide

DOT National Transportation Integrated Search

2017-09-01

Aviation Environmental Design Tool (AEDT) is a software system that models aircraft performance in space and time to estimate fuel consumption, emissions, noise, and air quality consequences. AEDT facilitates environmental review activities required ...

Integrated Baseline System (IBS). Version 1.03, System Management Guide

DOE Office of Scientific and Technical Information (OSTI.GOV)

Williams, J.R.; Bailey, S.; Bower, J.C.

This IBS System Management Guide explains how to install or upgrade the Integrated Baseline System (IBS) software package. The IBS is an emergency management planning and analysis tool that was developed under the direction of the Federal Emergency Management Agency (FEMA). This guide includes detailed instructions for installing the IBS software package on a Digital Equipment Corporation (DEC) VAX computer from the IBS distribution tapes. The installation instructions include procedures for both first-time installations and upgrades to existing IBS installations. To ensure that the system manager has the background necessary for successful installation of the IBS package, this guide alsomore » includes information on IBS computer requirements, software organization, and the generation of IBS distribution tapes. When special utility programs are used during IBS installation and setups, this guide refers you to the IBS Utilities Guide for specific instructions. This guide also refers you to the IBS Data Management Guide for detailed descriptions of some IBS data files and structures. Any special requirements for installation are not documented here but should be included in a set of installation notes that come with the distribution tapes.« less

FireFamily Plus user's guide, Version 2.0

Treesearch

Larry Bradshaw; Erin McCormick

2000-01-01

FireFamily Plus is the new software for summarizing and analyzing daily weather observations and computing fire danger indexes based on the National Fire Danger Rating System (NFDRS). While the software and packaging are new, many of the reports are not. FireFamily Plus addressed the year 2000 issues that confronted a litany of DOS programs that operated against fire...

ROMI 4.0: Rough mill simulator 4.0 users manual

Treesearch

R. Edward Thomas; Timo Grueneberg; Urs Buehlmann

2015-01-01

The Rough MIll simulator (ROMI Version 4.0) is a computer software package for personal computers (PCs) that simulates current industrial practices for rip-first, chop-first, and rip and chop-first lumber processing. This guide shows how to set up the software; design, implement, and execute simulations; and examine the results. ROMI 4.0 accepts cutting bills with as...

System administrator`s guide to CDPS. Version 1.0

DOE Office of Scientific and Technical Information (OSTI.GOV)

Didier, B.T.; Portwood, M.H.

The System Administrator`s Guide to CDPS is intended for those responsible for setting up and maintaining the hardware and software of a Common Mapping Standard (CMS) Date Production System (CDPS) installation. This guide assists the system administrator in performing typical administrative functions. It is not intended to replace the Ultrix Documentation Set that should be available for a DCPS installation. The Ultrix Documentation Set will be required to provide details on referenced Ultrix commands as well as procedures for performing Ultrix maintenance functions. There are six major sections in this guide. Section 1 introduces the system administrator to CDPS andmore » describes the assumptions that are made by this guide. Section 2 describes the CDPS platform configuration. Section 3 describes the platform preparation that is required to install the CDPS software. Section 4 describes the CPS software and its installation procedures. Section 5 describes the CDS software and its installation procedures. Section 6 describes various operation and maintenance procedures. Four appendices are also provided. Appendix A contains a list of used acronyms. Appendix B provides a terse description of common Ultrix commands that are used in administrative functions. Appendix C provides sample CPS and CDS configuration files. Appendix D provides a required list and a recommended list of Ultrix software subsets for installation on a CDPS platform.« less

User’s Guide for T.E.S.T. (version 4.2) (Toxicity Estimation Software Tool) A Program to Estimate Toxicity from Molecular Structure

EPA Science Inventory

The user's guide describes the methods used by TEST to predict toxicity and physical properties (including the new mode of action based method used to predict acute aquatic toxicity). It describes all of the experimental data sets included in the tool. It gives the prediction res...

Aviation Environmental Design Tool (AEDT): Version 2b: Installation Guide : [December 2015

DOT National Transportation Integrated Search

2015-12-01

Aviation Environmental Design Tool (AEDT) is a software system that models aircraft performance in space and time to estimate fuel consumption, emissions, noise, and air quality consequences. AEDT facilitates environmental review activities required ...

Aviation Environmental Design Tool (AEDT): Version 2b: Installation Guide : [June 2016

DOT National Transportation Integrated Search

2016-06-01

Aviation Environmental Design Tool (AEDT) is a software system that models aircraft performance in space and time to estimate fuel consumption, emissions, noise, and air quality consequences. AEDT facilitates environmental review activities required ...

Aviation Environmental Design Tool (AEDT): Version 2b: Installation Guide : [July 2015

DOT National Transportation Integrated Search

2015-07-01

Aviation Environmental Design Tool (AEDT) is a software system that models aircraft performance in space and time to estimate fuel consumption, emissions, noise, and air quality consequences. AEDT facilitates environmental review activities required ...

Solar Advisor Model User Guide for Version 2.0

DOE Office of Scientific and Technical Information (OSTI.GOV)

Gilman, P.; Blair, N.; Mehos, M.

2008-08-01

The Solar Advisor Model (SAM) provides a consistent framework for analyzing and comparing power system costs and performance across the range of solar technologies and markets, from photovoltaic systems for residential and commercial markets to concentrating solar power and large photovoltaic systems for utility markets. This manual describes Version 2.0 of the software, which can model photovoltaic and concentrating solar power technologies for electric applications for several markets. The current version of the Solar Advisor Model does not model solar heating and lighting technologies.

Laser velocimeter data acquisition system for the Langley 14- by 22-foot subsonic tunnel. Software reference guide version 3.3

NASA Technical Reports Server (NTRS)

Jumper, Judith K.

1994-01-01

The Laser Velocimeter Data Acquisition System (LVDAS) in the Langley 14- by 22-Foot Tunnel is controlled by a comprehensive software package. The software package was designed to control the data acquisition process during wind tunnel tests which employ a laser velocimeter measurement system. This report provides detailed explanations on how to configure and operate the LVDAS system to acquire laser velocimeter and static wind tunnel data.

Aviation Environmental Design Tool (AEDT): Version 2c Service Pack 2: Installation Guide

DOT National Transportation Integrated Search

2017-03-01

Aviation Environmental Design Tool (AEDT) is a software system that models aircraft performance in space and time to estimate fuel consumption, emissions, noise, and air quality consequences. AEDT facilitates environmental review activities required ...

ROMI-3: Rough-Mill Simulator Version 3.0: User's Guide

Treesearch

Joel M. Weiss; R. Edward Thomas; R. Edward Thomas

2005-01-01

ROMI-3 Rough-Mill Simulator is a software package that simulates current industrial practices for rip-first and chop-first lumber processing. This guide shows the user how to set up and examine the results of simulations of current or proposed mill practices. ROMI-3 accepts cutting bills with as many as 600 combined solid and/or panel part sizes. Plots of processed...

User Guide for the Plotting Software for the Los Alamos National Laboratory Nuclear Weapons Analysis Tools Version 2.0

DOE Office of Scientific and Technical Information (OSTI.GOV)

Cleland, Timothy James

The Los Alamos National Laboratory Plotting Software for the Nuclear Weapons Analysis Tools is a Java™ application based upon the open source library JFreeChart. The software provides a capability for plotting data on graphs with a rich variety of display options while allowing the viewer interaction via graph manipulation and scaling to best view the data. The graph types include XY plots, Date XY plots, Bar plots and Histogram plots.

Radiometer Calibration and Characterization (RCC) User's Manual: Windows Version 4.0

DOE Office of Scientific and Technical Information (OSTI.GOV)

Andreas, Afshin M.; Wilcox, Stephen M.

2016-02-29

The Radiometer Calibration and Characterization (RCC) software is a data acquisition and data archival system for performing Broadband Outdoor Radiometer Calibrations (BORCAL). RCC provides a unique method of calibrating broadband atmospheric longwave and solar shortwave radiometers using techniques that reduce measurement uncertainty and better characterize a radiometer's response profile. The RCC software automatically monitors and controls many of the components that contribute to uncertainty in an instrument's responsivity. This is a user's manual and guide to the RCC software.

ORA User’s Guide 2013

DTIC Science & Technology

2013-06-03

and a C++ computational backend . The most current version of ORA (3.0.8.5) software is available on the casos website: http://casos.cs.cmu.edu...optimizing a network’s design structure. ORA uses a Java interface for ease of use, and a C++ computational backend . The most current version of ORA...Eigenvector Centrality : Node most connected to other highly connected nodes. Assists in identifying those who can mobilize others Entity Class

Federal Communications Commission (FCC) Transponder Loading Data Conversion Software. User's guide and software maintenance manual, version 1.2

NASA Technical Reports Server (NTRS)

Mallasch, Paul G.

1993-01-01

This volume contains the complete software system documentation for the Federal Communications Commission (FCC) Transponder Loading Data Conversion Software (FIX-FCC). This software was written to facilitate the formatting and conversion of FCC Transponder Occupancy (Loading) Data before it is loaded into the NASA Geosynchronous Satellite Orbital Statistics Database System (GSOSTATS). The information that FCC supplies NASA is in report form and must be converted into a form readable by the database management software used in the GSOSTATS application. Both the User's Guide and Software Maintenance Manual are contained in this document. This volume of documentation passed an independent quality assurance review and certification by the Product Assurance and Security Office of the Planning Research Corporation (PRC). The manuals were reviewed for format, content, and readability. The Software Management and Assurance Program (SMAP) life cycle and documentation standards were used in the development of this document. Accordingly, these standards were used in the review. Refer to the System/Software Test/Product Assurance Report for the Geosynchronous Satellite Orbital Statistics Database System (GSOSTATS) for additional information.

Managing Process Improvement: A Guidebook for Implementing Change Version 01.00.06

DTIC Science & Technology

1993-12-01

and Competitive Position. Cambridge, 1982 Massachusetts: Massachusetts Institute of Technology. Egan, Gerard Change-Agent Skills B: Managing ... Innovation & Change. San 1988 Diego, California: Pfeiffer & Company. Fowler, Priscilla, and Software Engineering Group Guide. CMU/SEI-90-TR-24. Stan Rifkin

Topography Analysis and Visualization Software Supports a Guided Comparative Planetology Education Exhibit at the Smithsonian's Air and Space Museum

NASA Technical Reports Server (NTRS)

Roark, J. H.; Masuoka, C. M.; Frey, H. V.; Keller, J.; Williams, S.

2005-01-01

The Planetary Geodynamics Laboratory (http://geodynamics.gsfc.nasa.gov) of NASA s Goddard Space Flight Center designed, produced and recently delivered a "museum-friendly" version of GRIDVIEW, a grid visualization and analysis application, to the Smithsonian's National Air and Space Museum where it will be used in a guided comparative planetology education exhibit. The software was designed to enable museum visitors to interact with the same Earth and Mars topographic data and tools typically used by planetary scientists, and experience the thrill of discovery while learning about the geologic differences between Earth and Mars.

Eigensystem realization algorithm user's guide forVAX/VMS computers: Version 931216

NASA Technical Reports Server (NTRS)

Pappa, Richard S.

1994-01-01

The eigensystem realization algorithm (ERA) is a multiple-input, multiple-output, time domain technique for structural modal identification and minimum-order system realization. Modal identification is the process of calculating structural eigenvalues and eigenvectors (natural vibration frequencies, damping, mode shapes, and modal masses) from experimental data. System realization is the process of constructing state-space dynamic models for modern control design. This user's guide documents VAX/VMS-based FORTRAN software developed by the author since 1984 in conjunction with many applications. It consists of a main ERA program and 66 pre- and post-processors. The software provides complete modal identification capabilities and most system realization capabilities.

Federal Emergency Management Information System (FEMIS) system administration guide. Version 1.3

DOE Office of Scientific and Technical Information (OSTI.GOV)

Burford, M.J.; Burnett, R.A.; Downing, T.R.

The Federal Emergency Management Information System (FEMIS) is an emergency management planning and analysis tool that was developed by the (Pacific Northwest National Laboratory) (PNNL) under the direction of the U.S. Army Chemical Biological Defense Command. The FEMIS System Administration Guide defines FEMIS hardware and software requirements and gives instructions for installing the FEMIS software package. 91 This document also contains information on the following: software installation for the FEMIS data servers, communication server, mail server, and the emergency management workstations; distribution media loading and FEMIS installation validation and troubleshooting; and system management of FEMIS users, login, privileges, and usage.more » The system administration utilities (tools), available in the FEMIS client software, are described for user accounts and site profile. This document also describes the installation and use of system and database administration utilities that will assist in keeping the FEMIS system running in an operational environment.« less

ORA User’s Guide 2007

DTIC Science & Technology

2007-07-01

July 2007 CMU-ISRI-07-115 Institute for Software Research School of Computer Science Carnegie Mellon University Pittsburgh, PA 15213...ORA uses a Java interface for ease of use, and a C++ computational backend. The current version ORA1.2 software is available on the CASOS website...06-1-0104, N00014-06-1-0921, the AFOSR for “ Computational Modeling of Cultural Dimensions in Adversary Organization (MURI)”, the ARL for Assessing C2

AOIPS 3 User's guide. Volume 1: Overview and software utilization

NASA Technical Reports Server (NTRS)

Schotz, S. S.; Negri, A. J.; Robinson, W.

1989-01-01

This is Volume I of the Atmospheric and Oceanographic Information Processing System (AOIPS) User's Guide. AOIPS 3 is the version of the AOIPS software as of April 1989. The AOIPS software was developed jointly by the Goddard Space Flight Center and General Sciences Corporation. Volume 1 is intended to provide the user with an overall guide to the AOIPS system. It introduces the user to AOIPS system concepts, explains how programs are related and the necessary order of program execution, and provides brief descriptions derived from on-line help for every AOIPS program. It is intended to serve as a reference for information such as: program function, inmput/output variable descriptions, program limitations, etc. AOIPS is an interactive meteorological processing system with capabilities to ingest and analyze the many types of meteorological data. AOIPS includes several applications in areas of relevance to meteorological research. AOIPS is partitioned into four applications components: satellite data analysis, radar data analysis, aircraft data analysis, and utilities.

Testing of a novel pin array guide for accurate three-dimensional glenoid component positioning.

PubMed

Lewis, Gregory S; Stevens, Nicole M; Armstrong, April D

2015-12-01

A substantial challenge in total shoulder replacement is accurate positioning and alignment of the glenoid component. This challenge arises from limited intraoperative exposure and complex arthritic-driven deformity. We describe a novel pin array guide and method for patient-specific guiding of the glenoid central drill hole. We also experimentally tested the hypothesis that this method would reduce errors in version and inclination compared with 2 traditional methods. Polymer models of glenoids were created from computed tomography scans from 9 arthritic patients. Each 3-dimensional (3D) printed scapula was shrouded to simulate the operative situation. Three different methods for central drill alignment were tested, all with the target orientation of 5° retroversion and 0° inclination: no assistance, assistance by preoperative 3D imaging, and assistance by the pin array guide. Version and inclination errors of the drill line were compared. Version errors using the pin array guide (3° ± 2°) were significantly lower than version errors associated with no assistance (9° ± 7°) and preoperative 3D imaging (8° ± 6°). Inclination errors were also significantly lower using the pin array guide compared with no assistance. The new pin array guide substantially reduced errors in orientation of the central drill line. The guide method is patient specific but does not require rapid prototyping and instead uses adjustments to an array of pins based on automated software calculations. This method may ultimately provide a cost-effective solution enabling surgeons to obtain accurate orientation of the glenoid. Copyright © 2015 Journal of Shoulder and Elbow Surgery Board of Trustees. Published by Elsevier Inc. All rights reserved.

Technical Reviews and Audits for Systems, Equipment and Computer Software. Volume 1

DTIC Science & Technology

2009-09-15

acquisitions and technology developments. 2. This new-issue SMC standard comprises the text of The Aerospace Corporation report number TOR-2007( 8583 )-6414...TRA) Deskbook – DUSD(S&T) (May 2005) 17. IMP & IMS Preparation and Use Guide Version 0.9 (21 October 2005) 18. ISO /IEC STD 15939 Software...1521B, TOR-2007( 8583 )-6414_Volume 1. 110.2 Purpose A. The guidelines contained herein implement the Department of Defense Directive 4120.21

Designing Tracking Software for Image-Guided Surgery Applications: IGSTK Experience

PubMed Central

Enquobahrie, Andinet; Gobbi, David; Turek, Matt; Cheng, Patrick; Yaniv, Ziv; Lindseth, Frank; Cleary, Kevin

2009-01-01

Objective Many image-guided surgery applications require tracking devices as part of their core functionality. The Image-Guided Surgery Toolkit (IGSTK) was designed and developed to interface tracking devices with software applications incorporating medical images. Methods IGSTK was designed as an open source C++ library that provides the basic components needed for fast prototyping and development of image-guided surgery applications. This library follows a component-based architecture with several components designed for specific sets of image-guided surgery functions. At the core of the toolkit is the tracker component that handles communication between a control computer and navigation device to gather pose measurements of surgical instruments present in the surgical scene. The representations of the tracked instruments are superimposed on anatomical images to provide visual feedback to the clinician during surgical procedures. Results The initial version of the IGSTK toolkit has been released in the public domain and several trackers are supported. The toolkit and related information are available at www.igstk.org. Conclusion With the increased popularity of minimally invasive procedures in health care, several tracking devices have been developed for medical applications. Designing and implementing high-quality and safe software to handle these different types of trackers in a common framework is a challenging task. It requires establishing key software design principles that emphasize abstraction, extensibility, reusability, fault-tolerance, and portability. IGSTK is an open source library that satisfies these needs for the image-guided surgery community. PMID:20037671

Configuration Analysis Tool (CAT). System Description and users guide (revision 1)

NASA Technical Reports Server (NTRS)

Decker, W.; Taylor, W.; Mcgarry, F. E.; Merwarth, P.

1982-01-01

A system description of, and user's guide for, the Configuration Analysis Tool (CAT) are presented. As a configuration management tool, CAT enhances the control of large software systems by providing a repository for information describing the current status of a project. CAT provides an editing capability to update the information and a reporting capability to present the information. CAT is an interactive program available in versions for the PDP-11/70 and VAX-11/780 computers.

2MASS Catalog Server Kit Version 2.1

NASA Astrophysics Data System (ADS)

Yamauchi, C.

2013-10-01

The 2MASS Catalog Server Kit is open source software for use in easily constructing a high performance search server for important astronomical catalogs. This software utilizes the open source RDBMS PostgreSQL, therefore, any users can setup the database on their local computers by following step-by-step installation guide. The kit provides highly optimized stored functions for positional searchs similar to SDSS SkyServer. Together with these, the powerful SQL environment of PostgreSQL will meet various user's demands. We released 2MASS Catalog Server Kit version 2.1 in 2012 May, which supports the latest WISE All-Sky catalog (563,921,584 rows) and 9 major all-sky catalogs. Local databases are often indispensable for observatories with unstable or narrow-band networks or severe use, such as retrieving large numbers of records within a small period of time. This software is the best for such purposes, and increasing supported catalogs and improvements of version 2.1 can cover a wider range of applications including advanced calibration system, scientific studies using complicated SQL queries, etc. Official page: http://www.ir.isas.jaxa.jp/~cyamauch/2masskit/

Documentation Library Application (DLA) Version 2.0.0.1, User Guide

DTIC Science & Technology

2013-05-08

document DIScard chotnoes and undo <ht:dc-oot. View AN Library ~IR8librMY ~ooc~~.tiOn Llbt~ry View W AA Library View ~MI Libr -ary...Windows XP and access to the DLA SQL Server database. To install the DLA, navigate to N:\\Dept 161\\3 - PRODUCTS\\ Software Installation...Health Research Center. You should see the DLA menu item listed under the NHRC programs there. Contact the DLA software POC if you encounter any

The GLAS Science Algorithm Software (GSAS) User's Guide Version 7

NASA Technical Reports Server (NTRS)

Lee, Jeffrey E.

2013-01-01

The Geoscience Laser Altimeter System (GLAS) is the primary instrument for the ICESat (Ice, Cloud and Land Elevation Satellite) laser altimetry mission. ICESat was the benchmark Earth Observing System (EOS) mission for measuring ice sheet mass balance, cloud and aerosol heights, as well as land topography and vegetation characteristics. From 2003 to 2009, the ICESat mission provided multi-year elevation data needed to determine ice sheet mass balance as well as cloud property information, especially for stratospheric clouds common over polar areas. It also provided topography and vegetation data around the globe, in addition to the polar-specific coverage over the Greenland and Antarctic ice sheets.This document is the final version of the GLAS Science Algorithm Software Users Guide document. It contains the instructions to install the GLAS Science Algorithm Software (GSAS) in the production environment that was used to create the standard data products. It also describes the usage of each GSAS program in that environment with their required inputs and outputs. Included are a number of utility programs that are used to create ancillary data files that are used in the processing but generally are not distributed to the public as data products. Of importance is the values for the large number of constants used in the GSAS algorithm during processing are provided in an appendix.

Development and evaluation of an instrumented linkage system for total knee surgery.

PubMed

Walker, Peter S; Wei, Chih-Shing; Forman, Rachel E; Balicki, M A

2007-10-01

The principles and application of total knee surgery using optical tracking have been well demonstrated, but electromagnetic tracking may offer further advantages. We asked whether an instrumented linkage that attaches directly to the bone can maintain the accuracy of the optical and electromagnetic systems but be quicker, more convenient, and less expensive to use. Initial testing using a table-mounted digitizer to navigate a drill guide for placing pins to mount a cutting guide demonstrated the feasibility in terms of access and availability. A first version (called the Mark 1) instrumented linkage designed to fix directly to the bone was constructed and software was written to carry out a complete total knee replacement procedure. The results showed the system largely fulfilled these goals, but some surgeons found that using a visual display for pin placement was difficult and time consuming. As a result, a second version of a linkage system (called the K-Link) was designed to further develop the concept. User-friendly flexible software was developed for facilitating each step quickly and accurately while the placement of cutting guides was facilitated. We concluded that an instrumented linkage system could be a useful and potentially lower-cost option to the current systems for total knee replacement and could possibly have application to other surgical procedures.

An Exercise in Desktop Publishing: Using the "Newsroom."

ERIC Educational Resources Information Center

Kiteka, Sebastian F.

This guide provides a description and step-by-step instructions for the use of "Newsroom," a desktop-publishing program for the Apple II series of microcomputers produced by Springboard Software Inc. Based on the 1984 version of the program, this two-hour exercise focuses on the design and production of a newsletter with text and…

LANES 1 Users' Guide

NASA Technical Reports Server (NTRS)

Jordan, J.

1985-01-01

This document is intended for users of the Local Area Network Extensible Simulator, version I. This simulator models the performance of a Fiber Optic network under a variety of loading conditions and network characteristics. The options available to the user for defining the network conditions are described in this document. Computer hardware and software requirements are also defined.

Looking beyond Lewis Structures: A General Chemistry Molecular Modeling Experiment Focusing on Physical Properties and Geometry

ERIC Educational Resources Information Center

Linenberger, Kimberly J.; Cole, Renee S.; Sarkar, Somnath

2011-01-01

We present a guided-inquiry experiment using Spartan Student Version, ready to be adapted and implemented into a general chemistry laboratory course. The experiment provides students an experience with Spartan Molecular Modeling software while discovering the relationships between the structure and properties of molecules. Topics discussed within…

Ada Adoption Handbook: A Program Manager’s Guide, Version 2.0

DTIC Science & Technology

1992-10-01

specifically Ada oriented: "* Compilation order tool: A capability that, when given a set of Ada units, determines the com- pilation order. "* Automatic...July 1992. 146. Knapper. R. J., Linn, C. J.. & Salasin, J. Guidelines for Tailoring DOD-S TD-2167A for SOS Software Development. IDA Paper P- 2018

CEMENTITIOUS BARRIERS PARTNERSHIP FY13 MID-YEAR REPORT

DOE Office of Scientific and Technical Information (OSTI.GOV)

Burns, H.; Flach, G.; Langton, C.

2013-05-01

In FY2013, the Cementitious Barriers Partnership (CBP) is continuing in its effort to develop and enhance software tools demonstrating tangible progress toward fulfilling the objective of developing a set of tools to improve understanding and prediction of the long-term structural, hydraulic and chemical performance of cementitious barriers used in nuclear applications. In FY2012, the CBP released the initial inhouse “Beta-version” of the CBP Software Toolbox, a suite of software for simulating reactive transport in cementitious materials and important degradation phenomena. The current primary software components are LeachXS/ORCHESTRA, STADIUM, and a GoldSim interface for probabilistic analysis of selected degradation scenarios. THAMESmore » is a planned future CBP Toolbox component (FY13/14) focused on simulation of the microstructure of cementitious materials and calculation of resultant hydraulic and constituent mass transfer parameters needed in modeling. This past November, the CBP Software Toolbox Version 1.0 was released that supports analysis of external sulfate attack (including damage mechanics), carbonation, and primary constituent leaching. The LeachXS component embodies an extensive material property measurements database along with chemical speciation and reactive mass transport simulation cases with emphasis on leaching of major, trace and radionuclide constituents from cementitious materials used in DOE facilities, such as Saltstone (Savannah River) and Cast Stone (Hanford), tank closure grouts, and barrier concretes. STADIUM focuses on the physical and structural service life of materials and components based on chemical speciation and reactive mass transport of major cement constituents and aggressive species (e.g., chloride, sulfate, etc.). The CBP issued numerous reports and other documentation that accompanied the “Version 1.0” release including a CBP Software Toolbox User Guide and Installation Guide. These documents, as well as, the presentations from the CBP Software Toolbox Demonstration and User Workshop, which are briefly described below, can be accessed from the CBP webpage at http://cementbarriers.org/. The website was recently modified to describe the CBP Software Toolbox and includes an interest form for application to use the software. The CBP FY13 program is continuing research to improve and enhance the simulation tools as well as develop new tools that model other key degradation phenomena not addressed in Version 1.0. Also efforts to continue to verify the various simulation tools thru laboratory experiments and analysis of field specimens are ongoing to quantify and reduce the uncertainty associated with performance assessments are ongoing. This mid-year report also includes both a summary on the FY13 software accomplishments in addition to the release of Version 1.0 of the CBP Software Toolbox and the various experimental programs that are providing data for calibration and validation of the CBP developed software. The focus this year for experimental studies was to measure transport in cementitious material by utilization of a leaching method and reduction capacity of saltstone field samples. Results are being used to calibrate and validate the updated carbonation model.« less

The Tetracorder user guide: version 4.4

USGS Publications Warehouse

Livo, Keith Eric; Clark, Roger N.

2014-01-01

Imaging spectroscopy mapping software assists in the identification and mapping of materials based on their chemical properties as expressed in spectral measurements of a planet including the solid or liquid surface or atmosphere. Such software can be used to analyze field, aircraft, or spacecraft data; remote sensing datasets; or laboratory spectra. Tetracorder is a set of software algorithms commanded through an expert system to identify materials based on their spectra (Clark and others, 2003). Tetracorder also can be used in traditional remote sensing analyses, because some of the algorithms are a version of a matched filter. Thus, depending on the instructions fed to the Tetracorder system, results can range from simple matched filter output, to spectral feature fitting, to full identification of surface materials (within the limits of the spectral signatures of materials over the spectral range and resolution of the imaging spectroscopy data). A basic understanding of spectroscopy by the user is required for developing an optimum mapping strategy and assessing the results.

Ada Implementation Guide. Software Engineering With Ada. Volume 2

DTIC Science & Technology

1994-04-01

copy of the latest Ada Compiler Validation Capability (ACVC), the validation test suite ADA-BIB 10/15/91 2048 How to obtain the AJPO’S Ada...A I A-4Department of the Navy I I I 3 Helpful Sources AF-INT9I 8/12/91 2048 Text of Air Force 1991 Interpretation of Congressional Mandate SAF-POL88...the Ada language I 3 Ada Implementation Guide A--45 I I Helpful Sources CREASE 11/27/91 2048 How to obtain AJPO’s April 1988 CREASE Version 5.0 3

User guide for MODPATH Version 7—A particle-tracking model for MODFLOW

USGS Publications Warehouse

Pollock, David W.

2016-09-26

MODPATH is a particle-tracking post-processing program designed to work with MODFLOW, the U.S. Geological Survey (USGS) finite-difference groundwater flow model. MODPATH version 7 is the fourth major release since its original publication. Previous versions were documented in USGS Open-File Reports 89–381 and 94–464 and in USGS Techniques and Methods 6–A41.MODPATH version 7 works with MODFLOW-2005 and MODFLOW–USG. Support for unstructured grids in MODFLOW–USG is limited to smoothed, rectangular-based quadtree and quadpatch grids.A software distribution package containing the computer program and supporting documentation, such as input instructions, output file descriptions, and example problems, is available from the USGS over the Internet (http://water.usgs.gov/ogw/modpath/).

Solid waste projection model: Model version 1. 0 technical reference manual

DOE Office of Scientific and Technical Information (OSTI.GOV)

Wilkins, M.L.; Crow, V.L.; Buska, D.E.

1990-11-01

The Solid Waste Projection Model (SWPM) system is an analytical tool developed by Pacific Northwest Laboratory (PNL) for Westinghouse Hanford Company (WHC). The SWPM system provides a modeling and analysis environment that supports decisions in the process of evaluating various solid waste management alternatives. This document, one of a series describing the SWPM system, contains detailed information regarding the software utilized in developing Version 1.0 of the modeling unit of SWPM. This document is intended for use by experienced software engineers and supports programming, code maintenance, and model enhancement. Those interested in using SWPM should refer to the SWPM Modelmore » User's Guide. This document is available from either the PNL project manager (D. L. Stiles, 509-376-4154) or the WHC program monitor (B. C. Anderson, 509-373-2796). 8 figs.« less

Standards for Data Exchange and Case Management Information Systems in Support of Comprehensive Integrated School-Linked Services. Version 2.0.

ERIC Educational Resources Information Center

Far West Lab. for Educational Research and Development, San Francisco, CA.

This report is intended as a guide for local comprehensive integrated school-linked services sites and software vendors in developing and implementing case management information systems for the exchange and management of client data. The report is also intended to influence new development and future revisions of data systems, databases, and…

Federal Emergency Management Information System (FEMIS) System Administration Guide for FEMIS Version 1.4.6

DOE Office of Scientific and Technical Information (OSTI.GOV)

Arp, J.A.; Bower, J.C.; Burnett, R.A.

The Federal Emergency Management Information System (FEMIS) is an emergency management planning and response tool that was developed by the Pacific Northwest National Laboratory (PNNL) under the direction of the U.S. Army Chemical Biological Defense Command. The FEMIS System Administration Guide provides information necessary for the system administrator to maintain the FEMIS system. The FEMIS system is designed for a single Chemical Stockpile Emergency Preparedness Program (CSEPP) site that has multiple Emergency Operations Centers (EOCs). Each EOC has personal computers (PCs) that emergency planners and operations personnel use to do their jobs. These PCs are corrected via a local areamore » network (LAN) to servers that provide EOC-wide services. Each EOC is interconnected to other EOCs via a Wide Area Network (WAN). Thus, FEMIS is an integrated software product that resides on client/server computer architecture. The main body of FEMIS software, referred to as the FEMIS Application Software, resides on the PC client(s) and is directly accessible to emergency management personnel. The remainder of the FEMIS software, referred to as the FEMIS Support Software, resides on the UNIX server. The Support Software provides the communication data distribution and notification functionality necessary to operate FEMIS in a networked, client/server environment.« less

Federal Emergency Management Information System (FEMIS) Data Management Guide for FEMIS Version 1.4.6

DOE Office of Scientific and Technical Information (OSTI.GOV)

Angel, L.K.; Bower, J.C.; Burnett, R.A.

1999-06-29

The Federal Emergency Management Information System (FEMIS) is an emergency management planning and response tool that was developed by the Pacific Northwest National Laboratory (PNNL) under the direction of the U.S. Army Chemical Biological Defense Command. The FEMIS System Administration Guide provides information necessary for the system administrator to maintain the FEMIS system. The FEMIS system is designed for a single Chemical Stockpile Emergency Preparedness Program (CSEPP) site that has multiple Emergency Operations Centers (EOCs). Each EOC has personal computers (PCs) that emergency planners and operations personnel use to do their jobs. These PCs are corrected via a local areamore » network (LAN) to servers that provide EOC-wide services. Each EOC is interconnected to other EOCs via a Wide Area Network (WAN). Thus, FEMIS is an integrated software product that resides on client/server computer architecture. The main body of FEMIS software, referred to as the FEMIS Application Software, resides on the PC client(s) and is directly accessible to emergency management personnel. The remainder of the FEMIS software, referred to as the FEMIS Support Software, resides on the UNIX server. The Support Software provides the communication data distribution and notification functionality necessary to operate FEMIS in a networked, client/server environment.« less

IDSE Version 1 User's Manual

NASA Technical Reports Server (NTRS)

Mayer, Richard

1988-01-01

The integrated development support environment (IDSE) is a suite of integrated software tools that provide intelligent support for information modelling. These tools assist in function, information, and process modeling. Additional tools exist to assist in gathering and analyzing information to be modeled. This is a user's guide to application of the IDSE. Sections covering the requirements and design of each of the tools are presented. There are currently three integrated computer aided manufacturing definition (IDEF) modeling methodologies: IDEF0, IDEF1, and IDEF2. Also, four appendices exist to describe hardware and software requirements, installation procedures, and basic hardware usage.

Guide to NavyFOAM V1.0

DTIC Science & Technology

2011-04-01

NavyFOAM has been developed using an open-source CFD software tool-kit ( OpenFOAM ) that draws heavily upon object-oriented programming. The...numerical methods and the physical models in the original version of OpenFOAM have been upgraded in an effort to improve accuracy and robustness of...computational fluid dynamics OpenFOAM , Object Oriented Programming (OOP) (CFD), NavyFOAM, 16. SECURITY CLASSIFICATION OF: a. REPORT UNCLASSIFIED b

A Tutorial for SPSS/PC+ Studentware. Study Guide for the Doctor of Arts in Computer-Based Learning.

ERIC Educational Resources Information Center

MacFarland, Thomas W.; Hou, Cheng-I

The purpose of this tutorial is to provide the basic information needed for success with SPSS/PC+ Studentware, a student version of the statistical analysis software offered by SPSS, Inc., for the IBM PC+ and compatible computers. It is intended as a convenient summary of how to organize and conduct the most common computer-based statistical…

Visual Sample Plan Version 7.0 User's Guide

DOE Office of Scientific and Technical Information (OSTI.GOV)

Matzke, Brett D.; Newburn, Lisa LN; Hathaway, John E.

2014-03-01

User's guide for VSP 7.0 This user's guide describes Visual Sample Plan (VSP) Version 7.0 and provides instructions for using the software. VSP selects the appropriate number and location of environmental samples to ensure that the results of statistical tests performed to provide input to risk decisions have the required confidence and performance. VSP Version 7.0 provides sample-size equations or algorithms needed by specific statistical tests appropriate for specific environmental sampling objectives. It also provides data quality assessment and statistical analysis functions to support evaluation of the data and determine whether the data support decisions regarding sites suspected of contamination.more » The easy-to-use program is highly visual and graphic. VSP runs on personal computers with Microsoft Windows operating systems (XP, Vista, Windows 7, and Windows 8). Designed primarily for project managers and users without expertise in statistics, VSP is applicable to two- and three-dimensional populations to be sampled (e.g., rooms and buildings, surface soil, a defined layer of subsurface soil, water bodies, and other similar applications) for studies of environmental quality. VSP is also applicable for designing sampling plans for assessing chem/rad/bio threat and hazard identification within rooms and buildings, and for designing geophysical surveys for unexploded ordnance (UXO) identification.« less

User's Guide for the Commercial Modular Aero-Propulsion System Simulation (C-MAPSS): Version 2

NASA Technical Reports Server (NTRS)

Liu, Yuan; Frederick, Dean K.; DeCastro, Jonathan A.; Litt, Jonathan S.; Chan, William W.

2012-01-01

This report is a Users Guide for version 2 of the NASA-developed Commercial Modular Aero-Propulsion System Simulation (C-MAPSS) software, which is a transient simulation of a large commercial turbofan engine (up to 90,000-lb thrust) with a realistic engine control system. The software supports easy access to health, control, and engine parameters through a graphical user interface (GUI). C-MAPSS v.2 has some enhancements over the original, including three actuators rather than one, the addition of actuator and sensor dynamics, and an improved controller, while retaining or improving on the convenience and user-friendliness of the original. C-MAPSS v.2 provides the user with a graphical turbofan engine simulation environment in which advanced algorithms can be implemented and tested. C-MAPSS can run user-specified transient simulations, and it can generate state-space linear models of the nonlinear engine model at an operating point. The code has a number of GUI screens that allow point-and-click operation, and have editable fields for user-specified input. The software includes an atmospheric model which allows simulation of engine operation at altitudes from sea level to 40,000 ft, Mach numbers from 0 to 0.90, and ambient temperatures from -60 to 103 F. The package also includes a power-management system that allows the engine to be operated over a wide range of thrust levels throughout the full range of flight conditions.

Air Force Systems Engineering Assessment Model (AF SEAM) Management Guide, Version 2

DTIC Science & Technology

2010-09-21

gleaned from experienced professionals who assisted with the model’s development. Examples of the references used include the following: • ISO /IEC...Defense Acquisition Guidebook, Chapter 4 • AFI 63-1201, Life Cycle Systems Engineering • IEEE/EIA 12207 , Software Life Cycle Processes • Air...Selection criteria Reference Material: IEEE/EIA 12207 , MIL-HDBK-514 Other Considerations: Modeling, simulation and analysis techniques can be

State-of-the-art Hydrology Education: Development of Windows-based and Web-based Interactive Teaching-Learning Software

NASA Astrophysics Data System (ADS)

Chu, X.

2011-12-01

This study, funded by the NSF CAREER program, focuses on developing new methods to quantify microtopography-controlled overland flow processes and integrating the cutting-edge hydrologic research with all-level education and outreach activities. To achieve the educational goal, an interactive teaching-learning software package has been developed. This software, with enhanced visualization capabilities, integrates the new modeling techniques, computer-guided learning processes, and education-oriented tools in a user-friendly interface. Both Windows-based and web-based versions have been developed. The software is specially designed for three major user levels: elementary level (Level 1: K-12 and outreach education), medium level (Level 2: undergraduate education), and advanced level (Level 3: graduate education). Depending on the levels, users are guided to different educational systems. Each system consists of a series of mini "libraries" featured with movies, pictures, and documentation that cover fundamental theories, varying scale experiments, and computer modeling of overland flow generation, surface runoff, and infiltration processes. Testing and practical use of this educational software in undergraduate and graduate teaching demonstrate its effectiveness to promote students' learning and interest in hydrologic sciences. This educational software also has been used as a hydrologic demonstration tool for K-12 students and Native American students through the Nurturing American Tribal Undergraduate Research Education (NATURE) program and Science, Technology, Engineering and Mathematics (STEM) outreach activities.

A user's guide for the signal processing software for image and speech compression developed in the Communications and Signal Processing Laboratory (CSPL), version 1

NASA Technical Reports Server (NTRS)

Kumar, P.; Lin, F. Y.; Vaishampayan, V.; Farvardin, N.

1986-01-01

A complete documentation of the software developed in the Communication and Signal Processing Laboratory (CSPL) during the period of July 1985 to March 1986 is provided. Utility programs and subroutines that were developed for a user-friendly image and speech processing environment are described. Additional programs for data compression of image and speech type signals are included. Also, programs for the zero-memory and block transform quantization in the presence of channel noise are described. Finally, several routines for simulating the perfromance of image compression algorithms are included.

Workflow-Based Software Development Environment

NASA Technical Reports Server (NTRS)

Izygon, Michel E.

2013-01-01

The Software Developer's Assistant (SDA) helps software teams more efficiently and accurately conduct or execute software processes associated with NASA mission-critical software. SDA is a process enactment platform that guides software teams through project-specific standards, processes, and procedures. Software projects are decomposed into all of their required process steps or tasks, and each task is assigned to project personnel. SDA orchestrates the performance of work required to complete all process tasks in the correct sequence. The software then notifies team members when they may begin work on their assigned tasks and provides the tools, instructions, reference materials, and supportive artifacts that allow users to compliantly perform the work. A combination of technology components captures and enacts any software process use to support the software lifecycle. It creates an adaptive workflow environment that can be modified as needed. SDA achieves software process automation through a Business Process Management (BPM) approach to managing the software lifecycle for mission-critical projects. It contains five main parts: TieFlow (workflow engine), Business Rules (rules to alter process flow), Common Repository (storage for project artifacts, versions, history, schedules, etc.), SOA (interface to allow internal, GFE, or COTS tools integration), and the Web Portal Interface (collaborative web environment

Software Capability Evaluation (SCE) Version 2.0 Implementation Guide

DTIC Science & Technology

1994-02-01

Affected By SCE B-40 Figure 3-1 SCE Usage Decision Making Criteria 3-44 Figure 3-2 Estimated SCE Labor For One Source Selection 3-53 Figure 3-3 SCE...incorporated into the source selection sponsoring organization’s technical/management team for incorporation into acquisition decisions . The SCE team...expertise, past performance, and organizational capacity in acquisition decisions . The Capability Maturity Model Basic Concepts The CMM is based on the

The LARSYS Educational Package: Instructor's Notes for Use with the Data 100

NASA Technical Reports Server (NTRS)

Lindenlaub, J. C.; Russell, J. D.

1977-01-01

The LARSYS Educational Package is a set of instructional materials developed to train people to analyze remotely sensed multispectral data using LARSYS, a computer software system. The materials included in this volume have been designed to assist LARSYS instructors as they guide students through the LARSYS Educational Package. All of the materials have been updated from the previous version to reflect the use of a Data 100 Remote Terminal.

MC ray-tracing optimization of lobster-eye focusing devices with RESTRAX

NASA Astrophysics Data System (ADS)

Šaroun, Jan; Kulda, Jiří

2006-11-01

The enhanced functionalities of the latest version of the RESTRAX software, providing a high-speed Monte Carlo (MC) ray-tracing code to represent a virtual three-axis neutron spectrometer, include representation of parabolic and elliptic guide profiles and facilities for numerical optimization of parameter values, characterizing the instrument components. As examples, we present simulations of a doubly focusing monochromator in combination with cold neutron guides and lobster-eye supermirror devices, concentrating a monochromatic beam to small sample volumes. A Levenberg-Marquardt minimization algorithm is used to optimize simultaneously several parameters of the monochromator and lobster-eye guides. We compare the performance of optimized configurations in terms of monochromatic neutron flux and energy spread and demonstrate the effect of lobster-eye optics on beam transformations in real and momentum subspaces.

The Human Communication Research Centre dialogue database.

PubMed

Anderson, A H; Garrod, S C; Clark, A; Boyle, E; Mullin, J

1992-10-01

The HCRC dialogue database consists of over 700 transcribed and coded dialogues from pairs of speakers aged from seven to fourteen. The speakers are recorded while tackling co-operative problem-solving tasks and the same pairs of speakers are recorded over two years tackling 10 different versions of our two tasks. In addition there are over 200 dialogues recorded between pairs of undergraduate speakers engaged on versions of the same tasks. Access to the database, and to its accompanying custom-built search software, is available electronically over the JANET system by contacting liz@psy.glasgow.ac.uk, from whom further information about the database and a user's guide to the database can be obtained.

TADPLOT program, version 2.0: User's guide

NASA Technical Reports Server (NTRS)

Hammond, Dana P.

1991-01-01

The TADPLOT Program, Version 2.0 is described. The TADPLOT program is a software package coordinated by a single, easy-to-use interface, enabling the researcher to access several standard file formats, selectively collect specific subsets of data, and create full-featured publication and viewgraph quality plots. The user-interface was designed to be independent from any file format, yet provide capabilities to accommodate highly specialized data queries. Integrated with an applications software network, data can be assessed, collected, and viewed quickly and easily. Since the commands are data independent, subsequent modifications to the file format will be transparent, while additional file formats can be integrated with minimal impact on the user-interface. The graphical capabilities are independent of the method of data collection; thus, the data specification and subsequent plotting can be modified and upgraded as separate functional components. The graphics kernel selected adheres to the full functional specifications of the CORE standard. Both interface and postprocessing capabilities are fully integrated into TADPLOT.

Migration of the Gaudi and LHCb software repositories from CVS to Subversion

NASA Astrophysics Data System (ADS)

Clemencic, M.; Degaudenzi, H.; LHCb Collaboration

2011-12-01

A common code repository is of primary importance in a distributed development environment such as large HEP experiments. CVS (Concurrent Versions System) has been used in the past years at CERN for the hosting of shared software repositories, among which were the repositories for the Gaudi Framework and the LHCb software projects. Many developers around the world produced alternative systems to share code and revisions among several developers, mainly to overcome the limitations in CVS, and CERN has recently started a new service for code hosting based on the version control system Subversion. The differences between CVS and Subversion and the way the code was organized in Gaudi and LHCb CVS repositories required careful study and planning of the migration. Special care was used to define the organization of the new Subversion repository. To avoid as much as possible disruption in the development cycle, the migration has been gradual with the help of tools developed explicitly to hide the differences between the two systems. The principles guiding the migration steps, the organization of the Subversion repository and the tools developed will be presented, as well as the problems encountered both from the librarian and the user points of view.

User Guide for Compressible Flow Toolbox Version 2.1 for Use With MATLAB(Registered Trademark); Version 7

NASA Technical Reports Server (NTRS)

Melcher, Kevin J.

2006-01-01

This report provides a user guide for the Compressible Flow Toolbox, a collection of algorithms that solve almost 300 linear and nonlinear classical compressible flow relations. The algorithms, implemented in the popular MATLAB programming language, are useful for analysis of one-dimensional steady flow with constant entropy, friction, heat transfer, or shock discontinuities. The solutions do not include any gas dissociative effects. The toolbox also contains functions for comparing and validating the equation-solving algorithms against solutions previously published in the open literature. The classical equations solved by the Compressible Flow Toolbox are: isentropic-flow equations, Fanno flow equations (pertaining to flow of an ideal gas in a pipe with friction), Rayleigh flow equations (pertaining to frictionless flow of an ideal gas, with heat transfer, in a pipe of constant cross section.), normal-shock equations, oblique-shock equations, and Prandtl-Meyer expansion equations. At the time this report was published, the Compressible Flow Toolbox was available without cost from the NASA Software Repository.

Federal Emergency Management Information System (FEMIS) system administration guide. Version 1.4

DOE Office of Scientific and Technical Information (OSTI.GOV)

Arp, J.A.; Burnett, R.A.; Downing, T.R.

The Federal Emergency Management Information System (FEMIS) is an emergency management planning and analysis tool that was developed by the Pacific Northwest National Laboratory (PNNL) under the direction of the US Army Chemical Biological Defense Command. The FEMIS System Administration Guide defines FEMIS hardware and software requirements and gives instructions for installing the FEMIS software package. This document also contains information on the following: software installation for the FEMIS data servers, communication server, mail server, and the emergency management workstations; distribution media loading and FEMIS installation validation and troubleshooting; and system management of FEMIS users, login privileges, and usage. Themore » system administration utilities (tools), available in the FEMIS client software, are described for user accounts and site profile. This document also describes the installation and use of system and database administration utilities that will assist in keeping the FEMIS system running in an operational environment. The FEMIS system is designed for a single Chemical Stockpile Emergency Preparedness Program (CSEPP) site that has multiple Emergency Operations Centers (EOCs). Each EOC has personal computers (PCs) that emergency planners and operations personnel use to do their jobs. These PCs are connected via a local area network (LAN) to servers that provide EOC-wide services. Each EOC is interconnected to other EOCs via telecommunications links.« less

42 CFR 423.160 - Standards for electronic prescribing.

Code of Federal Regulations, 2011 CFR

2011-10-01

... Prescriber/Pharmacist Interface SCRIPT Standard, Implementation Guide, Version 8, Release 1, (Version 8.1... Prescriber/Pharmacist Interface SCRIPT Standard, Implementation Guide, Version 8, Release 1 (Version 8.1... Programs Prescriber/Pharmacist Interface SCRIPT Standard, Implementation Guide Version 8, Release 1...

AOIPS 3 user's guide. Volume 2: Program descriptions

NASA Technical Reports Server (NTRS)

Schotz, Steve S.; Piper, Thomas S.; Negri, Andrew J.

1990-01-01

The Atmospheric and Oceanographic Information Processing System (AOIPS) 3 is the version of the AOIPS software as of April 1989. The AOIPS software was developed jointly by the Goddard Space Flight Center and General Sciences Corporation. A detailed description of very AOIPS program is presented. It is intended to serve as a reference for such items as program functionality, program operational instructions, and input/output variable descriptions. Program descriptions are derived from the on-line help information. Each program description is divided into two sections. The functional description section describes the purpose of the program and contains any pertinent operational information. The program description sections lists the program variables as they appear on-line, and describes them in detail.

Effect of Software Version on the Accuracy of an Intraoral Scanning Device.

PubMed

Haddadi, Yasser; Bahrami, Golnosh; Isidor, Flemming

2018-04-06

To investigate the impact of software version on the accuracy of an intraoral scanning device. A master tooth was scanned with a high-precision optical scanner and then 10 times with a CEREC Omnicam scanner with software versions 4.4.0 and 4.4.4. Discrepancies were measured using quality control software. Mean deviation for 4.4.0 was 36.2 ± 35 μm and for 4.4.4 was 20.7 ± 14.2 μm (P ≤ .001). Software version has a significant impact on the accuracy of an intraoral scanner. It is important that researchers also publish the software version of scanners when publishing their findings.

Study of a unified hardware and software fault-tolerant architecture

NASA Technical Reports Server (NTRS)

Lala, Jaynarayan; Alger, Linda; Friend, Steven; Greeley, Gregory; Sacco, Stephen; Adams, Stuart

1989-01-01

A unified architectural concept, called the Fault Tolerant Processor Attached Processor (FTP-AP), that can tolerate hardware as well as software faults is proposed for applications requiring ultrareliable computation capability. An emulation of the FTP-AP architecture, consisting of a breadboard Motorola 68010-based quadruply redundant Fault Tolerant Processor, four VAX 750s as attached processors, and four versions of a transport aircraft yaw damper control law, is used as a testbed in the AIRLAB to examine a number of critical issues. Solutions of several basic problems associated with N-Version software are proposed and implemented on the testbed. This includes a confidence voter to resolve coincident errors in N-Version software. A reliability model of N-Version software that is based upon the recent understanding of software failure mechanisms is also developed. The basic FTP-AP architectural concept appears suitable for hosting N-Version application software while at the same time tolerating hardware failures. Architectural enhancements for greater efficiency, software reliability modeling, and N-Version issues that merit further research are identified.

Evaluation of a New Software Version of the RTVue Optical Coherence Tomograph for Image Segmentation and Detection of Glaucoma in High Myopia.

PubMed

Holló, Gábor; Shu-Wei, Hsu; Naghizadeh, Farzaneh

2016-06-01

To compare the current (6.3) and a novel software version (6.12) of the RTVue-100 optical coherence tomograph (RTVue-OCT) for ganglion cell complex (GCC) and retinal nerve fiber layer thickness (RNFLT) image segmentation and detection of glaucoma in high myopia. RNFLT and GCC scans were acquired with software version 6.3 of the RTVue-OCT on 51 highly myopic eyes (spherical refractive error ≤-6.0 D) of 51 patients, and were analyzed with both the software versions. Twenty-two eyes were nonglaucomatous, 13 were ocular hypertensive and 16 eyes had glaucoma. No difference was seen for any RNFLT, and average GCC parameter between the software versions (paired t test, P≥0.084). Global loss volume was significantly lower (more normal) with version 6.12 than with version 6.3 (Wilcoxon signed-rank test, P<0.001). The percentage agreement (κ) between the clinical (normal and ocular hypertensive vs. glaucoma) and the software-provided classifications (normal and borderline vs. outside normal limits) were 0.3219 and 0.4442 for average RNFLT, and 0.2926 and 0.4977 for average GCC with versions 1 and 2, respectively (McNemar symmetry test, P≥0.289). No difference in average RNFLT and GCC classification (McNemar symmetry test, P≥0.727) and the number of eyes with at least 1 segmentation error (P≥0.109) was found between the software versions, respectively. Although GCC segmentation was improved with software version 6.12 compared with the current version in highly myopic eyes, this did not result in a significant change of the average RNFLT and GCC values, and did not significantly improve the software-provided classification for glaucoma.

Classification of voting algorithms for N-version software

NASA Astrophysics Data System (ADS)

Tsarev, R. Yu; Durmuş, M. S.; Üstoglu, I.; Morozov, V. A.

2018-05-01

A voting algorithm in N-version software is a crucial component that evaluates the execution of each of the N versions and determines the correct result. Obviously, the result of the voting algorithm determines the outcome of the N-version software in general. Thus, the choice of the voting algorithm is a vital issue. A lot of voting algorithms were already developed and they may be selected for implementation based on the specifics of the analysis of input data. However, the voting algorithms applied in N-version software are not classified. This article presents an overview of classic and recent voting algorithms used in N-version software and the authors' classification of the voting algorithms. Moreover, the steps of the voting algorithms are presented and the distinctive features of the voting algorithms in Nversion software are defined.

Resurrecting Legacy Code Using Ontosoft Knowledge-Sharing and Digital Object Management to Revitalize and Reproduce Software for Groundwater Management Research

NASA Astrophysics Data System (ADS)

Kwon, N.; Gentle, J.; Pierce, S. A.

2015-12-01

Software code developed for research is often used for a relatively short period of time before it is abandoned, lost, or becomes outdated. This unintentional abandonment of code is a valid problem in the 21st century scientific process, hindering widespread reusability and increasing the effort needed to develop research software. Potentially important assets, these legacy codes may be resurrected and documented digitally for long-term reuse, often with modest effort. Furthermore, the revived code may be openly accessible in a public repository for researchers to reuse or improve. For this study, the research team has begun to revive the codebase for Groundwater Decision Support System (GWDSS), originally developed for participatory decision making to aid urban planning and groundwater management, though it may serve multiple use cases beyond those originally envisioned. GWDSS was designed as a java-based wrapper with loosely federated commercial and open source components. If successfully revitalized, GWDSS will be useful for both practical applications as a teaching tool and case study for groundwater management, as well as informing theoretical research. Using the knowledge-sharing approaches documented by the NSF-funded Ontosoft project, digital documentation of GWDSS is underway, from conception to development, deployment, characterization, integration, composition, and dissemination through open source communities and geosciences modeling frameworks. Information assets, documentation, and examples are shared using open platforms for data sharing and assigned digital object identifiers. Two instances of GWDSS version 3.0 are being created: 1) a virtual machine instance for the original case study to serve as a live demonstration of the decision support tool, assuring the original version is usable, and 2) an open version of the codebase, executable installation files, and developer guide available via an open repository, assuring the source for the application is accessible with version control and potential for new branch developments. Finally, metadata about the software has been completed within the OntoSoft portal to provide descriptive curation, make GWDSS searchable, and complete documentation of the scientific software lifecycle.

Math Description Engine Software Development Kit

NASA Technical Reports Server (NTRS)

Shelton, Robert O.; Smith, Stephanie L.; Dexter, Dan E.; Hodgson, Terry R.

2010-01-01

The Math Description Engine Software Development Kit (MDE SDK) can be used by software developers to make computer-rendered graphs more accessible to blind and visually-impaired users. The MDE SDK generates alternative graph descriptions in two forms: textual descriptions and non-verbal sound renderings, or sonification. It also enables display of an animated trace of a graph sonification on a visual graph component, with color and line-thickness options for users having low vision or color-related impairments. A set of accessible graphical user interface widgets is provided for operation by end users and for control of accessible graph displays. Version 1.0 of the MDE SDK generates text descriptions for 2D graphs commonly seen in math and science curriculum (and practice). The mathematically rich text descriptions can also serve as a virtual math and science assistant for blind and sighted users, making graphs more accessible for everyone. The MDE SDK has a simple application programming interface (API) that makes it easy for programmers and Web-site developers to make graphs accessible with just a few lines of code. The source code is written in Java for cross-platform compatibility and to take advantage of Java s built-in support for building accessible software application interfaces. Compiled-library and NASA Open Source versions are available with API documentation and Programmer s Guide at http:/ / prim e.jsc.n asa. gov.

Adaptation of the European Commission-recommended user testing method to patient medication information leaflets in Japan.

PubMed

Yamamoto, Michiko; Doi, Hirohisa; Yamamoto, Ken; Watanabe, Kazuhiro; Sato, Tsugumichi; Suka, Machi; Nakayama, Takeo; Sugimori, Hiroki

2017-01-01

The safe use of drugs relies on providing accurate drug information to patients. In Japan, patient leaflets called Drug Guide for Patients are officially available; however, their utility has never been verified. This is the first attempt to improve Drug Guide for Patients via user testing in Japan. To test and improve communication of drug information to minimize risk for patients via user testing of the current and revised versions of Drug Guide for Patients, and to demonstrate that this method is effective for improving Drug Guide for Patients in Japan. We prepared current and revised versions of the Drug Guide for Patients and performed user testing via semi-structured interviews with consumers to compare these versions for two guides for Mercazole and Strattera. We evenly divided 54 participants into two groups with similar distributions of sex, age, and literacy level to test the differing versions of the Mercazole guide. Another group of 30 participants were divided evenly to test the versions of the Strattera guide. After completing user testing, the participants evaluated both guides in terms of amount of information, readability, usefulness of information, and layout and appearance. Participants were also asked for their opinions on the leaflets. Response rates were 100% for both Mercazole and Strattera. The revised versions of both Guides were superior or equal to the current versions in terms of accessibility and understandability. The revised version of the Mercazole guide showed better ratings for readability, usefulness of information, and layout ( p <0.01) than did the current version, while that for Strattera showed superior readability and layout ( p <0.01). User testing was effective for evaluating the utility of Drug Guide for Patients. Additionally, the revised version had superior accessibility and understandability.

User's guide for mapIMG 3--Map image re-projection software package

USGS Publications Warehouse

Finn, Michael P.; Mattli, David M.

2012-01-01

Version 0.0 (1995), Dan Steinwand, U.S. Geological Survey (USGS)/Earth Resources Observation Systems (EROS) Data Center (EDC)--Version 0.0 was a command line version for UNIX that required four arguments: the input metadata, the output metadata, the input data file, and the output destination path. Version 1.0 (2003), Stephen Posch and Michael P. Finn, USGS/Mid-Continent Mapping Center (MCMC--Version 1.0 added a GUI interface that was built using the Qt library for cross platform development. Version 1.01 (2004), Jason Trent and Michael P. Finn, USGS/MCMC--Version 1.01 suggested bounds for the parameters of each projection. Support was added for larger input files, storage of the last used input and output folders, and for TIFF/ GeoTIFF input images. Version 2.0 (2005), Robert Buehler, Jason Trent, and Michael P. Finn, USGS/National Geospatial Technical Operations Center (NGTOC)--Version 2.0 added Resampling Methods (Mean, Mode, Min, Max, and Sum), updated the GUI design, and added the viewer/pre-viewer. The metadata style was changed to XML and was switched to a new naming convention. Version 3.0 (2009), David Mattli and Michael P. Finn, USGS/Center of Excellence for Geospatial Information Science (CEGIS)--Version 3.0 brings optimized resampling methods, an updated GUI, support for less than global datasets, UTM support and the whole codebase was ported to Qt4.

CrossTalk. The Journal of Defense Software Engineering. Volume 14, Number 5, May 2001

DTIC Science & Technology

2001-05-01

REPORT NUMBER 9. SPONSORING/MONITORING AGENCY NAME(S) AND ADDRESS(ES) 10 . SPONSOR/MONITOR’S ACRONYM(S) 11. SPONSOR/MONITOR’S REPORT NUMBER(S) 12... 10 HIGHLIGHTED IN AN APRIL 30 TUTORIAL AND ON MAY 1 - TRACK 8 STEVEN R. PERKINS IS A PLENARY SPEAKER ON MAY 2 PATRICK J. SCHROEDER WILL PRESENT ON MAY...Capability - the first released version. (The artifacts for each are provided by an electronic process guide [ 10 ] and are also used by the Rational Unified

Solid Modeling Aerospace Research Tool (SMART) user's guide, version 2.0

NASA Technical Reports Server (NTRS)

Mcmillin, Mark L.; Spangler, Jan L.; Dahmen, Stephen M.; Rehder, John J.

1993-01-01

The Solid Modeling Aerospace Research Tool (SMART) software package is used in the conceptual design of aerospace vehicles. It provides a highly interactive and dynamic capability for generating geometries with Bezier cubic patches. Features include automatic generation of commonly used aerospace constructs (e.g., wings and multilobed tanks); cross-section skinning; wireframe and shaded presentation; area, volume, inertia, and center-of-gravity calculations; and interfaces to various aerodynamic and structural analysis programs. A comprehensive description of SMART and how to use it is provided.

Transferable Output ASCII Data (TOAD) gateway: Version 1.0 user's guide

NASA Technical Reports Server (NTRS)

Bingel, Bradford D.

1991-01-01

The Transferable Output ASCII Data (TOAD) Gateway, release 1.0 is described. This is a software tool for converting tabular data from one format into another via the TOAD format. This initial release of the Gateway allows free data interchange among the following file formats: TOAD; Standard Interface File (SIF); Program to Optimize Simulated Trajectories (POST) input; Comma Separated Value (TSV); and a general free-form file format. As required, additional formats can be accommodated quickly and easily.

Effect of software version and parameter settings on the marginal and internal adaptation of crowns fabricated with the CAD/CAM system.

PubMed

Shim, Ji Suk; Lee, Jin Sook; Lee, Jeong Yol; Choi, Yeon Jo; Shin, Sang Wan; Ryu, Jae Jun

2015-10-01

This study investigated the marginal and internal adaptation of individual dental crowns fabricated using a CAD/CAM system (Sirona's BlueCam), also evaluating the effect of the software version used, and the specific parameter settings in the adaptation of crowns. Forty digital impressions of a master model previously prepared were acquired using an intraoral scanner and divided into four groups based on the software version and on the spacer settings used. The versions 3.8 and 4.2 of the software were used, and the spacer parameter was set at either 40 μm or 80 μm. The marginal and internal fit of the crowns were measured using the replica technique, which uses a low viscosity silicone material that simulates the thickness of the cement layer. The data were analyzed using a Friedman two-way analysis of variance (ANOVA) and paired t-tests with significance level set at p<0.05. The two-way ANOVA analysis showed the software version (p<0.05) and the spacer parameter (p<0.05) significantly affected the crown adaptation. The crowns designed with the version 4.2 of the software showed a better fit than those designed with the version 3.8, particularly in the axial wall and in the inner margin. The spacer parameter was more accurately represented in the version 4.2 of the software than in the version 3.8. In addition, the use of the version 4.2 of the software combined with the spacer parameter set at 80 μm showed the least variation. On the other hand, the outer margin was not affected by the variables. Compared to the version 3.8 of the software, the version 4.2 can be recommended for the fabrication of well-fitting crown restorations, and for the appropriate regulation of the spacer parameter.

Developing iCare v.1.0: an academic electronic health record.

PubMed

Wyatt, Tami H; Li, Xueping; Indranoi, Chayawat; Bell, Matthew

2012-06-01

An electronic health record application, iCare v.1.0, was developed and tested that allows data input and retrieval while tracking student performance over time. The development and usability testing of iCare v.1.0 followed a rapid prototyping software development and testing model. Once the functionality was tested by engineers, the usability and feasibility testing began with a convenience sample of focus group members including undergraduate and graduate students and faculty. Three focus groups were created, and four subjects participated in each focus group (n = 12). Nielsen's usability heuristics and methods of evaluation were used to evaluate data captured from each focus group. Overall, users wanted a full-featured electronic health record with features that coached or guided users. The earliest versions of iCare v.1.0 did not provide help features and prompts to guide students but were later added. Future versions will incorporate a full-featured help section. The interface and design of iCare v.1.0 are similar to professional electronic health record applications. As a result of this usability study, future versions of iCare will include more robust help features along with advanced reporting and elements specific to specialty populations such as pediatrics and mental health services.

A novel augmented reality system of image projection for image-guided neurosurgery.

PubMed

Mahvash, Mehran; Besharati Tabrizi, Leila

2013-05-01

Augmented reality systems combine virtual images with a real environment. To design and develop an augmented reality system for image-guided surgery of brain tumors using image projection. A virtual image was created in two ways: (1) MRI-based 3D model of the head matched with the segmented lesion of a patient using MRIcro software (version 1.4, freeware, Chris Rorden) and (2) Digital photograph based model in which the tumor region was drawn using image-editing software. The real environment was simulated with a head phantom. For direct projection of the virtual image to the head phantom, a commercially available video projector (PicoPix 1020, Philips) was used. The position and size of the virtual image was adjusted manually for registration, which was performed using anatomical landmarks and fiducial markers position. An augmented reality system for image-guided neurosurgery using direct image projection has been designed successfully and implemented in first evaluation with promising results. The virtual image could be projected to the head phantom and was registered manually. Accurate registration (mean projection error: 0.3 mm) was performed using anatomical landmarks and fiducial markers position. The direct projection of a virtual image to the patients head, skull, or brain surface in real time is an augmented reality system that can be used for image-guided neurosurgery. In this paper, the first evaluation of the system is presented. The encouraging first visualization results indicate that the presented augmented reality system might be an important enhancement of image-guided neurosurgery.

Estimation and enhancement of real-time software reliability through mutation analysis

NASA Technical Reports Server (NTRS)

Geist, Robert; Offutt, A. J.; Harris, Frederick C., Jr.

1992-01-01

A simulation-based technique for obtaining numerical estimates of the reliability of N-version, real-time software is presented. An extended stochastic Petri net is employed to represent the synchronization structure of N versions of the software, where dependencies among versions are modeled through correlated sampling of module execution times. Test results utilizing specifications for NASA's planetary lander control software indicate that mutation-based testing could hold greater potential for enhancing reliability than the desirable but perhaps unachievable goal of independence among N versions.

The Digital Shoreline Analysis System (DSAS) Version 4.0 - An ArcGIS extension for calculating shoreline change

USGS Publications Warehouse

Thieler, E. Robert; Himmelstoss, Emily A.; Zichichi, Jessica L.; Ergul, Ayhan

2009-01-01

The Digital Shoreline Analysis System (DSAS) version 4.0 is a software extension to ESRI ArcGIS v.9.2 and above that enables a user to calculate shoreline rate-of-change statistics from multiple historic shoreline positions. A user-friendly interface of simple buttons and menus guides the user through the major steps of shoreline change analysis. Components of the extension and user guide include (1) instruction on the proper way to define a reference baseline for measurements, (2) automated and manual generation of measurement transects and metadata based on user-specified parameters, and (3) output of calculated rates of shoreline change and other statistical information. DSAS computes shoreline rates of change using four different methods: (1) endpoint rate, (2) simple linear regression, (3) weighted linear regression, and (4) least median of squares. The standard error, correlation coefficient, and confidence interval are also computed for the simple and weighted linear-regression methods. The results of all rate calculations are output to a table that can be linked to the transect file by a common attribute field. DSAS is intended to facilitate the shoreline change-calculation process and to provide rate-of-change information and the statistical data necessary to establish the reliability of the calculated results. The software is also suitable for any generic application that calculates positional change over time, such as assessing rates of change of glacier limits in sequential aerial photos, river edge boundaries, land-cover changes, and so on.

HAZPAC; an interactive map of Pacific Rim natural hazards, population, and infrastructure

USGS Publications Warehouse

Bemis, B.L.; Goss, H.V.; Yurkovich, E.S.; Perron, T.J.; Howell, D.G.

2002-01-01

This is an online version of a CD-ROM publication. The text files that describe using this publication make reference to software provided on the disc. For this online version the software can be downloaded for free from Adobe Systems and Environmental Systems Research Institute, Inc. (ESRI). Welcome to HAZPAC! HAZPAC is an interactive map about natural hazard risk in the Pacific Rim region. It is intended to communicate to a broad audience the ideas of 'Crowding the Rim,' which is an international, public-private partnership that fosters collaborative solutions for regional risks. HAZPAC, which stands for 'HAZards of the PACific,' uses Geographic Information System (GIS) technology to help people visualize the socioeconomic connections and shared hazard vulnerabilities among Pacific Rim countries, as well as to explore the general nature of risk. Please refer to the 'INTRODUCTION TO HAZPAC' section of the readme file below to determine which HAZPAC project will be right for you. Once you have decided which HAZPAC project is suitable for you, please refer to the 'GETTING STARTED' sections in the readme file for some basic information that will help you begin using HAZPAC. Also, we highly recommend that you follow the Tutorial exercises in the project-specific HAZPAC User Guides. The User Guides are PDF (Portable Document Format) files that must be read with Adobe Acrobat Reader (a free copy of Acrobat Reader is available using the link near the bottom of this page).

78 FR 54365 - Uniform Fine Assessment Version 4.0 Software; Calculating Amounts of Civil Penalties for...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-09-03

... Version 4.0 Software; Calculating Amounts of Civil Penalties for Violations of Regulations AGENCY: Federal... Agency has begun using the Uniform Fine Assessment (UFA) Version 4.0 software to calculate the amounts of... penalties for violations of the FMCSRs and HMRs and since the mid- 1990's FMCSA has used its UFA software to...

Galileo Teacher Training Program - GTTP Days

NASA Astrophysics Data System (ADS)

Heenatigala, T.; Doran, R.

2012-09-01

Despite the vast availability of teaching resources on the internet, finding a quality and user-friendly materials is a challenge. Many teachers are not trained with proper computing skills to search for the right materials. With years of expertise training teachers globally, Galileo Teacher Training Program (GTTP) [1] recognize the need of having a go-to place for teachers to access resources. To fill this need GTTP developed - GTTP Days - a program creating resource guides for planetary, lunar and solar fields. Avoiding the imbalance in science resources between the developed and undeveloped world, GTTP Days is available both online and offline as a printable version. Each resource guide covers areas such as scientific knowledge, exploration, observation, photography, art & culture and web tools. The lesson plans of each guide include hands-on activities, web tools, software tools, and activities for people with disabilities [2]. Each activity indicate the concepts used, the skills required and age level which guides the teachers and educators to select the correct content suitable for local curriculum.

Low Cost Ways to Keep Software Current.

ERIC Educational Resources Information Center

Schultheis, Robert A.

1992-01-01

Discusses strategies for providing students with current computer software technology including acquiring previous versions of software, obtaining demonstration software, using student versions, getting examination software, buying from mail order firms, buying few copies, exploring site licenses, acquiring shareware or freeware, and applying for…

An experimental evaluation of software redundancy as a strategy for improving reliability

NASA Technical Reports Server (NTRS)

Eckhardt, Dave E., Jr.; Caglayan, Alper K.; Knight, John C.; Lee, Larry D.; Mcallister, David F.; Vouk, Mladen A.; Kelly, John P. J.

1990-01-01

The strategy of using multiple versions of independently developed software as a means to tolerate residual software design faults is suggested by the success of hardware redundancy for tolerating hardware failures. Although, as generally accepted, the independence of hardware failures resulting from physical wearout can lead to substantial increases in reliability for redundant hardware structures, a similar conclusion is not immediate for software. The degree to which design faults are manifested as independent failures determines the effectiveness of redundancy as a method for improving software reliability. Interest in multi-version software centers on whether it provides an adequate measure of increased reliability to warrant its use in critical applications. The effectiveness of multi-version software is studied by comparing estimates of the failure probabilities of these systems with the failure probabilities of single versions. The estimates are obtained under a model of dependent failures and compared with estimates obtained when failures are assumed to be independent. The experimental results are based on twenty versions of an aerospace application developed and certified by sixty programmers from four universities. Descriptions of the application, development and certification processes, and operational evaluation are given together with an analysis of the twenty versions.

Volpe SuperFar V6.0 Software and Support Documentation; Letter Report V324-FB48B3-LR3

DOT National Transportation Integrated Search

2017-09-29

This Letter Report serves to deliver the third external release version of the USDOT Volpe Centers SuperFAR Spectral Aircraft Noise Processing Software (Version 6.0). Earlier versions of the software were delivered to FAA in February 2015 and Marc...

An experimental investigation of fault tolerant software structures in an avionics application

NASA Technical Reports Server (NTRS)

Caglayan, Alper K.; Eckhardt, Dave E., Jr.

1989-01-01

The objective of this experimental investigation is to compare the functional performance and software reliability of competing fault tolerant software structures utilizing software diversity. In this experiment, three versions of the redundancy management software for a skewed sensor array have been developed using three diverse failure detection and isolation algorithms and incorporated into various N-version, recovery block and hybrid software structures. The empirical results show that, for maximum functional performance improvement in the selected application domain, the results of diverse algorithms should be voted before being processed by multiple versions without enforced diversity. Results also suggest that when the reliability gain with an N-version structure is modest, recovery block structures are more feasible since higher reliability can be obtained using an acceptance check with a modest reliability.

Validation of a DICE Simulation Against a Discrete Event Simulation Implemented Entirely in Code.

PubMed

Möller, Jörgen; Davis, Sarah; Stevenson, Matt; Caro, J Jaime

2017-10-01

Modeling is an essential tool for health technology assessment, and various techniques for conceptualizing and implementing such models have been described. Recently, a new method has been proposed-the discretely integrated condition event or DICE simulation-that enables frequently employed approaches to be specified using a common, simple structure that can be entirely contained and executed within widely available spreadsheet software. To assess if a DICE simulation provides equivalent results to an existing discrete event simulation, a comparison was undertaken. A model of osteoporosis and its management programmed entirely in Visual Basic for Applications and made public by the National Institute for Health and Care Excellence (NICE) Decision Support Unit was downloaded and used to guide construction of its DICE version in Microsoft Excel ® . The DICE model was then run using the same inputs and settings, and the results were compared. The DICE version produced results that are nearly identical to the original ones, with differences that would not affect the decision direction of the incremental cost-effectiveness ratios (<1% discrepancy), despite the stochastic nature of the models. The main limitation of the simple DICE version is its slow execution speed. DICE simulation did not alter the results and, thus, should provide a valid way to design and implement decision-analytic models without requiring specialized software or custom programming. Additional efforts need to be made to speed up execution.

Development of N-version software samples for an experiment in software fault tolerance

NASA Technical Reports Server (NTRS)

Lauterbach, L.

1987-01-01

The report documents the task planning and software development phases of an effort to obtain twenty versions of code independently designed and developed from a common specification. These versions were created for use in future experiments in software fault tolerance, in continuation of the experimental series underway at the Systems Validation Methods Branch (SVMB) at NASA Langley Research Center. The 20 versions were developed under controlled conditions at four U.S. universities, by 20 teams of two researchers each. The versions process raw data from a modified Redundant Strapped Down Inertial Measurement Unit (RSDIMU). The specifications, and over 200 questions submitted by the developers concerning the specifications, are included as appendices to this report. Design documents, and design and code walkthrough reports for each version, were also obtained in this task for use in future studies.

The mathematical statement for the solving of the problem of N-version software system design

NASA Astrophysics Data System (ADS)

Kovalev, I. V.; Kovalev, D. I.; Zelenkov, P. V.; Voroshilova, A. A.

2015-10-01

The N-version programming, as a methodology of the fault-tolerant software systems design, allows successful solving of the mentioned tasks. The use of N-version programming approach turns out to be effective, since the system is constructed out of several parallel executed versions of some software module. Those versions are written to meet the same specification but by different programmers. The problem of developing an optimal structure of N-version software system presents a kind of very complex optimization problem. This causes the use of deterministic optimization methods inappropriate for solving the stated problem. In this view, exploiting heuristic strategies looks more rational. In the field of pseudo-Boolean optimization theory, the so called method of varied probabilities (MVP) has been developed to solve problems with a large dimensionality.

Using MATLAB Software on the Peregrine System | High-Performance Computing

Science.gov Websites

| NREL MATLAB Software on the Peregrine System Using MATLAB Software on the Peregrine System Learn how to use MATLAB software on the Peregrine system. Running MATLAB in Batch Mode Using the node. Understanding Versions and Licenses Learn about the MATLAB software versions and licenses

AEOSS design guide for system analysis on Advanced Earth-Orbital Spacecraft Systems

NASA Technical Reports Server (NTRS)

Lee, Hwa-Ping

1990-01-01

Advanced Earth Orbital Spacecraft System (AEOSS) enables users to project the requried power, weight, and cost for a generic earth-orbital spacecraft system. These variables are calculated on the component and subsystem levels, and then the system level. The included six subsystems are electric power, thermal control, structure, auxillary propulsion, attitude control, and communication, command, and data handling. The costs are computed using statistically determined models that were derived from the flown spacecraft in the past and were categorized into classes according to their functions and structural complexity. Selected design and performance analyses for essential components and subsystems are also provided. AEOSS has the feature permitting a user to enter known values of these parameters, totally and partially, at all levels. All information is of vital importance to project managers of subsystems or a spacecraft system. AEOSS is a specially tailored software coded from the relational database program of the Acius; 4th Dimension with a Macintosh version. Because of the licensing agreement, two versions of the AEOSS documents were prepared. This version AEOSS Design Guide, is for users to exploit the full capacity of the 4th Dimension. It is for a user who wants to alter or expand the program structures, the program statements, and the program procedures. The user has to possess a 4th Dimension first.

[Reconstruction assisted by 3D printing in maxillofacial surgery].

PubMed

Ernoult, C; Bouletreau, P; Meyer, C; Aubry, S; Breton, P; Bachelet, J-T

2015-04-01

3-dimensional models (3D) appeared in the medical field 20 years ago. The recent development of consumer 3D printers explains the renewed interest in this technology. We describe the technical and practical modalities of this surgical tool, illustrated by concrete examples. The OsiriX(®) software (version 5.8.5, Geneva, Switzerland) was used for 3D surface reconstruction of the area of interest, the generation and export of ".stl" file. The NetFabb(®) software (Basic version 5.1.1, Lupburg, Germany) provided the preparation of ".stl" file. The 3D-printer was an Up plus 2 Easy 120(®) (PP3DP, Beijing Technology Co. TierTime Ltd., Chine). The printer used fused deposition modeling. The softwar Up!(®) allowed the 3d impression as required. The first case illustrated the value of 3D printing in the upper (frontal sinus and orbital roof). The second case concerned the preconfiguration of the osteosynthesis material for a complex fracture of the midface through the "mirroring" system. The third case showed the conformation of a prereconstruction for segmental mandibulectomy. Current 3D-printers are easy to use and represent a promising solution for medical prototyping. The 3D printing will quickly become undeniable because of its advantages: information sharing, simulation, surgical guides, pedagogy. Copyright © 2015 Elsevier Masson SAS. All rights reserved.

Radiative transfer modeling through terrestrial atmosphere and ocean accounting for inelastic processes: Software package SCIATRAN

NASA Astrophysics Data System (ADS)

Rozanov, V. V.; Dinter, T.; Rozanov, A. V.; Wolanin, A.; Bracher, A.; Burrows, J. P.

2017-06-01

SCIATRAN is a comprehensive software package which is designed to model radiative transfer processes in the terrestrial atmosphere and ocean in the spectral range from the ultraviolet to the thermal infrared (0.18-40 μm). It accounts for multiple scattering processes, polarization, thermal emission and ocean-atmosphere coupling. The main goal of this paper is to present a recently developed version of SCIATRAN which takes into account accurately inelastic radiative processes in both the atmosphere and the ocean. In the scalar version of the coupled ocean-atmosphere radiative transfer solver presented by Rozanov et al. [61] we have implemented the simulation of the rotational Raman scattering, vibrational Raman scattering, chlorophyll and colored dissolved organic matter fluorescence. In this paper we discuss and explain the numerical methods used in SCIATRAN to solve the scalar radiative transfer equation including trans-spectral processes, and demonstrate how some selected radiative transfer problems are solved using the SCIATRAN package. In addition we present selected comparisons of SCIATRAN simulations with those published benchmark results, independent radiative transfer models, and various measurements from satellite, ground-based, and ship-borne instruments. The extended SCIATRAN software package along with a detailed User's Guide is made available for scientists and students, who are undertaking their own research typically at universities, via the web page of the Institute of Environmental Physics (IUP), University of Bremen: http://www.iup.physik.uni-bremen.de.

PEGASUS User's Guide. 5.1c

NASA Technical Reports Server (NTRS)

Suhs, Norman E.; Dietz, William E.; Rogers, Stuart E.; Nash, Steven M.; Onufer, Jeffrey T.

2000-01-01

PEGASUS 5.1 is the latest version of the PEGASUS series of mesh interpolation codes. It is a fully three-dimensional code. The main purpose for the development of this latest version was to significantly decrease the number of user inputs required and to allow for easier operation of the code. This guide is to be used with the user's manual for version 4 of PEGASUS. A basic description of methods used in both versions is described in the Version 4 manual. A complete list of all user inputs used in version 5.1 is given in this guide.

SMART Structures User's Guide - Version 3.0

NASA Technical Reports Server (NTRS)

Spangler, Jan L.

1996-01-01

Version 3.0 of the Solid Modeling Aerospace Research Tool (SMART Structures) is used to generate structural models for conceptual and preliminary-level aerospace designs. Features include the generation of structural elements for wings and fuselages, the integration of wing and fuselage structural assemblies, and the integration of fuselage and tail structural assemblies. The highly interactive nature of this software allows the structural engineer to move quickly from a geometry that defines a vehicle's external shape to one that has both external components and internal components which may include ribs, spars, longerons, variable depth ringframes, a floor, a keel, and fuel tanks. The geometry that is output is consistent with FEA requirements and includes integrated wing and empennage carry-through and frame attachments. This report provides a comprehensive description of SMART Structures and how to use it.

Section 4. The GIS Weasel User's Manual

USGS Publications Warehouse

Viger, Roland J.; Leavesley, George H.

2007-01-01

INTRODUCTION The GIS Weasel was designed to aid in the preparation of spatial information for input to lumped and distributed parameter hydrologic or other environmental models. The GIS Weasel provides geographic information system (GIS) tools to help create maps of geographic features relevant to a user's model and to generate parameters from those maps. The operation of the GIS Weasel does not require the user to be a GIS expert, only that the user have an understanding of the spatial information requirements of the environmental simulation model being used. The GIS Weasel software system uses a GIS-based graphical user interface (GUI), the C programming language, and external scripting languages. The software will run on any computing platform where ArcInfo Workstation (version 8.0.2 or later) and the GRID extension are accessible. The user controls the processing of the GIS Weasel by interacting with menus, maps, and tables. The purpose of this document is to describe the operation of the software. This document is not intended to describe the usage of this software in support of any particular environmental simulation model. Such guides are published separately.

Software Fault Tolerance: A Tutorial

NASA Technical Reports Server (NTRS)

Torres-Pomales, Wilfredo

2000-01-01

Because of our present inability to produce error-free software, software fault tolerance is and will continue to be an important consideration in software systems. The root cause of software design errors is the complexity of the systems. Compounding the problems in building correct software is the difficulty in assessing the correctness of software for highly complex systems. After a brief overview of the software development processes, we note how hard-to-detect design faults are likely to be introduced during development and how software faults tend to be state-dependent and activated by particular input sequences. Although component reliability is an important quality measure for system level analysis, software reliability is hard to characterize and the use of post-verification reliability estimates remains a controversial issue. For some applications software safety is more important than reliability, and fault tolerance techniques used in those applications are aimed at preventing catastrophes. Single version software fault tolerance techniques discussed include system structuring and closure, atomic actions, inline fault detection, exception handling, and others. Multiversion techniques are based on the assumption that software built differently should fail differently and thus, if one of the redundant versions fails, it is expected that at least one of the other versions will provide an acceptable output. Recovery blocks, N-version programming, and other multiversion techniques are reviewed.

SAGE FOR WINDOWS (WSAGE) VERSION 1.0 SOLVENT ALTERNATIVES GUIDE - USER'S GUIDE

EPA Science Inventory

The guide provides instructions for using the Solvent Alternatives Guide (SAGE) for Windows, version 1.0. The guide assumes that the user is familiar with the fundamentals of operating Windows 3.1 (or higher) on a personal computer under the DOS 5.0 (or higher) operating system. ...

SAGE FOR MACINTOSH (MSAGE) VERSION 1.0 SOLVENT ALTERNATIVES GUIDE - USER'S GUIDE

EPA Science Inventory

The guide provides instructions for using the Solvent Alternatives Guide (SAGE) for Macintosh, version 1.0. The guide assumes that the user is familiar with the fundamentals of operating a
Macintosh personal computer under the System 7.0 (or higher) operating system. SAGE for ...

mMass 3: a cross-platform software environment for precise analysis of mass spectrometric data.

PubMed

Strohalm, Martin; Kavan, Daniel; Novák, Petr; Volný, Michael; Havlícek, Vladimír

2010-06-01

While tools for the automated analysis of MS and LC-MS/MS data are continuously improving, it is still often the case that at the end of an experiment, the mass spectrometrist will spend time carefully examining individual spectra. Current software support is mostly provided only by the instrument vendors, and the available software tools are often instrument-dependent. Here we present a new generation of mMass, a cross-platform environment for the precise analysis of individual mass spectra. The software covers a wide range of processing tasks such as import from various data formats, smoothing, baseline correction, peak picking, deisotoping, charge determination, and recalibration. Functions presented in the earlier versions such as in silico digestion and fragmentation were redesigned and improved. In addition to Mascot, an interface for ProFound has been implemented. A specific tool is available for isotopic pattern modeling to enable precise data validation. The largest available lipid database (from the LIPID MAPS Consortium) has been incorporated and together with the new compound search tool lipids can be rapidly identified. In addition, the user can define custom libraries of compounds and use them analogously. The new version of mMass is based on a stand-alone Python library, which provides the basic functionality for data processing and interpretation. This library can serve as a good starting point for other developers in their projects. Binary distributions of mMass, its source code, a detailed user's guide, and video tutorials are freely available from www.mmass.org .

Quick Overview Scout 2008 Version 1.0

EPA Science Inventory

The Scout 2008 version 1.0 statistical software package has been updated from past DOS and Windows versions to provide classical and robust univariate and multivariate graphical and statistical methods that are not typically available in commercial or freeware statistical softwar...

Integrated Baseline System (IBS), Version 1.03. User guide: Chemical Stockpile Emergency Preparedness Program

DOE Office of Scientific and Technical Information (OSTI.GOV)

Bailey, B.M.; Burford, M.J.; Downing, T.R.

The Integrated Baseline System (IBS), operated by the Federal Emergency Management Agency (FEMA), is a system of computerized tools for emergency planing and analysis. This document is the user guide for the IBS and explains how to operate the IBS system. The fundamental function of the IBS is to provide tools that civilian emergency management personnel can use in developing emergency plans and in supporting emergency management activities to cope with a chemical-releasing event at a military chemical stockpile. Emergency management planners can evaluate concepts and ideas using the IBS system. The results of that experience can then be factoredmore » into refining requirements and plans. This document provides information for the general system user, and is the primary reference for the system features of the IBS. It is designed for persons who are familiar with general emergency management concepts, operations, and vocabulary. Although the IBS manual set covers basic and advanced operations, it is not a complete reference document set. Emergency situation modeling software in the IBS is supported by additional technical documents. Some of the other LBS software is commercial software for which more complete documentation is available. The IBS manuals reference such documentation where necessary. IBS is a dynamic system. Its capabilities are in a state of continuing expansion and enhancement.« less

75 FR 38026 - Medicare Program; Identification of Backward Compatible Version of Adopted Standard for E...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-07-01

... Programs (NCPDP) Prescriber/ Pharmacist Interface SCRIPT standard, Implementation Guide, Version 10... Prescriber/Pharmacist Interface SCRIPT standard, Version 8, Release 1 and its equivalent NCPDP Prescriber/Pharmacist Interface SCRIPT Implementation Guide, Version 8, Release 1 (hereinafter referred to as the...

Detection of faults and software reliability analysis

NASA Technical Reports Server (NTRS)

Knight, J. C.

1986-01-01

Multiversion or N-version programming was proposed as a method of providing fault tolerance in software. The approach requires the separate, independent preparation of multiple versions of a piece of software for some application. Specific topics addressed are: failure probabilities in N-version systems, consistent comparison in N-version systems, descriptions of the faults found in the Knight and Leveson experiment, analytic models of comparison testing, characteristics of the input regions that trigger faults, fault tolerance through data diversity, and the relationship between failures caused by automatically seeded faults.

Assessment Environment for Complex Systems Software Guide

NASA Technical Reports Server (NTRS)

2013-01-01

This Software Guide (SG) describes the software developed to test the Assessment Environment for Complex Systems (AECS) by the West Virginia High Technology Consortium (WVHTC) Foundation's Mission Systems Group (MSG) for the National Aeronautics and Space Administration (NASA) Aeronautics Research Mission Directorate (ARMD). This software is referred to as the AECS Test Project throughout the remainder of this document. AECS provides a framework for developing, simulating, testing, and analyzing modern avionics systems within an Integrated Modular Avionics (IMA) architecture. The purpose of the AECS Test Project is twofold. First, it provides a means to test the AECS hardware and system developed by MSG. Second, it provides an example project upon which future AECS research may be based. This Software Guide fully describes building, installing, and executing the AECS Test Project as well as its architecture and design. The design of the AECS hardware is described in the AECS Hardware Guide. Instructions on how to configure, build and use the AECS are described in the User's Guide. Sample AECS software, developed by the WVHTC Foundation, is presented in the AECS Software Guide. The AECS Hardware Guide, AECS User's Guide, and AECS Software Guide are authored by MSG. The requirements set forth for AECS are presented in the Statement of Work for the Assessment Environment for Complex Systems authored by NASA Dryden Flight Research Center (DFRC). The intended audience for this document includes software engineers, hardware engineers, project managers, and quality assurance personnel from WVHTC Foundation (the suppliers of the software), NASA (the customer), and future researchers (users of the software). Readers are assumed to have general knowledge in the field of real-time, embedded computer software development.

Analytic Patch Configuration (APC) gateway version 1.0 user's guide

NASA Technical Reports Server (NTRS)

Bingel, Bradford D.

1990-01-01

The Analytic Patch Configuration (APC) is an interactive software tool which translates aircraft configuration geometry files from one format into another. This initial release of the APC Gateway accommodates six formats: the four accepted APC formats (89f, 89fd, 89u, and 89ud), the PATRAN 2.x phase 1 neutral file format, and the Integrated Aerodynamic Analysis System (IAAS) General Geometry (GG) format. Written in ANSI FORTRAN 77 and completely self-contained, the APC Gateway is very portable and was already installed on CDC/NOS, VAX/VMS, SUN, SGI/IRIS, CONVEX, and GRAY hosts.

User's Guide, software for reduction and analysis of daily weather and surface-water data: Tools for time series analysis of precipitation, temperature, and streamflow data

USGS Publications Warehouse

Hereford, Richard

2006-01-01

The software described here is used to process and analyze daily weather and surface-water data. The programs are refinements of earlier versions that include minor corrections and routines to calculate frequencies above a threshold on an annual or seasonal basis. Earlier versions of this software were used successfully to analyze historical precipitation patterns of the Mojave Desert and the southern Colorado Plateau regions, ecosystem response to climate variation, and variation of sediment-runoff frequency related to climate (Hereford and others, 2003; 2004; in press; Griffiths and others, 2006). The main program described here (Day_Cli_Ann_v5.3) uses daily data to develop a time series of various statistics for a user specified accounting period such as a year or season. The statistics include averages and totals, but the emphasis is on the frequency of occurrence in days of relatively rare weather or runoff events. These statistics are indices of climate variation; for a discussion of climate indices, see the Climate Research Unit website of the University of East Anglia (http://www.cru.uea.ac.uk/projects/stardex/) and the Climate Change Indices web site (http://cccma.seos.uvic.ca/ETCCDMI/indices.html). Specifically, the indices computed with this software are the frequency of high intensity 24-hour rainfall, unusually warm temperature, and unusually high runoff. These rare, or extreme events, are those greater than the 90th percentile of precipitation, streamflow, or temperature computed for the period of record of weather or gaging stations. If they cluster in time over several decades, extreme events may produce detectable change in the physical landscape and ecosystem of a given region. Although the software has been tested on a variety of data, as with any software, the user should carefully evaluate the results with their data. The programs were designed for the range of precipitation, temperature, and streamflow measurements expected in the semiarid Southwest United States. The user is encouraged to review the examples provided with the software. The software is written in Fortran 90 with Fortran 95 extensions and was compiled with the Digital Visual Fortran compiler version 6.6. The executables run on Windows 2000 and XP, and they operate in a MS-DOS console window that has only very simple graphical options such as font size and color, background color, and size of the window. Error trapping was not written into the programs. Typically, when an error occurs, the console window closes without a message.

Federal Emergency Management Information System (FEMIS) system administration guide, version 1.4.5

DOE Office of Scientific and Technical Information (OSTI.GOV)

Arp, J.A.; Burnett, R.A.; Carter, R.J.

The Federal Emergency Management Information Systems (FEMIS) is an emergency management planning and response tool that was developed by the Pacific Northwest National Laboratory (PNNL) under the direction of the US Army Chemical Biological Defense Command. The FEMIS System Administration Guide provides information necessary for the system administrator to maintain the FEMIS system. The FEMIS system is designed for a single Chemical Stockpile Emergency Preparedness Program (CSEPP) site that has multiple Emergency Operations Centers (EOCs). Each EOC has personal computers (PCs) that emergency planners and operations personnel use to do their jobs. These PCs are connected via a local areamore » network (LAN) to servers that provide EOC-wide services. Each EOC is interconnected to other EOCs via a Wide Area Network (WAN). Thus, FEMIS is an integrated software product that resides on client/server computer architecture. The main body of FEMIS software, referred to as the FEMIS Application Software, resides on the PC client(s) and is directly accessible to emergency management personnel. The remainder of the FEMIS software, referred to as the FEMIS Support Software, resides on the UNIX server. The Support Software provides the communication, data distribution, and notification functionality necessary to operate FEMIS in a networked, client/server environment. The UNIX server provides an Oracle relational database management system (RDBMS) services, ARC/INFO GIS (optional) capabilities, and basic file management services. PNNL developed utilities that reside on the server include the Notification Service, the Command Service that executes the evacuation model, and AutoRecovery. To operate FEMIS, the Application Software must have access to a site specific FEMIS emergency management database. Data that pertains to an individual EOC`s jurisdiction is stored on the EOC`s local server. Information that needs to be accessible to all EOCs is automatically distributed by the FEMIS database to the other EOCs at the site.« less

The Trial Software version for DEMETER power spectrum files visualization and mapping

NASA Astrophysics Data System (ADS)

Lozbin, Anatoliy; Inchin, Alexander; Shpadi, Maxim

2010-05-01

In the frame of Kazakhstan's Scientific Space System creation for earthquakes precursors research, the hardware and software of DEMETER satellite was investigated. The data processing Software of DEMETER is based on package SWAN under IDL Virtual machine and realizes many features, but we can't find an important tool for the spectrograms analysis - space-time visualization of power spectrum files from electromagnetic devices as ICE and IMSC. For elimination of this problem we have developed Software which is offered to use. The DeSS (DEMETER Spectrogram Software) - it is Software for visualization, analysis and a mapping of power spectrum data from electromagnetic devices ICE and IMSC. The Software primary goal is to give the researcher friendly tool for the analysis of electromagnetic data from DEMETER Satellite for earthquake precursors and other ionosphere events researches. The Input data for DeSS Software is a power spectrum files: - Power spectrum of 1 component of the electric field in the VLF range (APID 1132); - Power spectrum of 1 component of the electric field in the HF range (APID 1134); - Power spectrum of 1 component of the magnetic field in the VLF range (APID 1137). The main features and operations of the software is possible: - various time and frequency filtration; - visualization of time dependence of signal intensity on fixed frequency; - spectral density visualization for fixed frequency range; - spectrogram autosize and smooth spectrogram; - the information in each point of the spectrogram: time, frequency and intensity; - the spectrum information in the separate window, consisting of 4 blocks; - data mapping with 6 range scale. On the map we can browse next information: - satellite orbit; - conjugate point at the satellite altitude; - north conjugate point at the altitude 110 km; - south conjugate point at the altitude 110 km. This is only trial software version to help the researchers and we always ready collaborate with scientists for software improvement. References: 1. D.Lagoutte, J.Y. Brochot, D. de Carvalho, L.Madrias and M. Parrot. DEMETER Microsatellite. Scientific Mission Center. Data product description. DMT-SP-9-CM-6054-LPC. 2. D.Lagoutte, J.Y. Brochot, P.Latremoliere. SWAN - Software for Waveform Analysis. LPCE/NI/003.E - Part 1 (User's guide), Part 2 (Analysis tools), Part 3 (User's project interface).

Detection of faults and software reliability analysis

NASA Technical Reports Server (NTRS)

Knight, John C.

1987-01-01

Multi-version or N-version programming is proposed as a method of providing fault tolerance in software. The approach requires the separate, independent preparation of multiple versions of a piece of software for some application. These versions are executed in parallel in the application environment; each receives identical inputs and each produces its version of the required outputs. The outputs are collected by a voter and, in principle, they should all be the same. In practice there may be some disagreement. If this occurs, the results of the majority are taken to be the correct output, and that is the output used by the system. A total of 27 programs were produced. Each of these programs was then subjected to one million randomly-generated test cases. The experiment yielded a number of programs containing faults that are useful for general studies of software reliability as well as studies of N-version programming. Fault tolerance through data diversity and analytic models of comparison testing are discussed.

Application of majority voting and consensus voting algorithms in N-version software

NASA Astrophysics Data System (ADS)

Tsarev, R. Yu; Durmuş, M. S.; Üstoglu, I.; Morozov, V. A.

2018-05-01

N-version programming is one of the most common techniques which is used to improve the reliability of software by building in fault tolerance, redundancy and decreasing common cause failures. N different equivalent software versions are developed by N different and isolated workgroups by considering the same software specifications. The versions solve the same task and return results that have to be compared to determine the correct result. Decisions of N different versions are evaluated by a voting algorithm or the so-called voter. In this paper, two of the most commonly used software voting algorithms such as the majority voting algorithm and the consensus voting algorithm are studied. The distinctive features of Nversion programming with majority voting and N-version programming with consensus voting are described. These two algorithms make a decision about the correct result on the base of the agreement matrix. However, if the equivalence relation on the agreement matrix is not satisfied it is impossible to make a decision. It is shown that the agreement matrix can be transformed into an appropriate form by using the Boolean compositions when the equivalence relation is satisfied.

Categorical Regression and Benchmark Dose Software 3.0

EPA Science Inventory

The objective of this full-day course is to provide participants with interactive training on the use of the U.S. Environmental Protection Agency’s (EPA) Benchmark Dose software (BMDS, version 3.0, released fall 2018) and Categorical Regression software (CatReg, version 3.1...

Technical Data Exchange Software Tools Adapted to Distributed Microsatellite Design

NASA Astrophysics Data System (ADS)

Pache, Charly

2002-01-01

One critical issue concerning distributed design of satellites, is the collaborative work it requires. In particular, the exchange of data between each group responsible for each subsystem can be complex and very time-consuming. The goal of this paper is to present a design collaborative tool, the SSETI Design Model (SDM), specifically developed for enabling satellite distributed design. SDM is actually used in the ongoing Student Space Exploration &Technology (SSETI) initiative (www.sseti.net). SSETI is lead by European Space Agency (ESA) outreach office (http://www.estec.esa.nl/outreach), involving student groups from all over Europe for design, construction and launch of a microsatellite. The first part of this paper presents the current version of the SDM tool, a collection of Microsoft Excel linked worksheets, one for each subsystem. An overview of the project framework/structure is given, explaining the different actors, the flows between them, as well as the different types of data and the links - formulas - between data sets. Unified Modeling Language (UML) diagrams give an overview of the different parts . Then the SDM's functionalities, developed in VBA scripts (Visual Basic for Application), are introduced, as well as the interactive features, user interfaces and administration tools. The second part discusses the capabilities and limitations of SDM current version. Taking into account these capabilities and limitations, the third part outlines the next version of SDM, a web-oriented, database-driven evolution of the current version. This new approach will enable real-time data exchange and processing between the different actors of the mission. Comprehensive UML diagrams will guide the audience through the entire modeling process of such a system. Tradeoffs simulation capabilities, security, reliability, hardware and software issues will also be thoroughly discussed.

User's Guide for the Agricultural Non-Point Source (AGNPS) Pollution Model Data Generator

USGS Publications Warehouse

Finn, Michael P.; Scheidt, Douglas J.; Jaromack, Gregory M.

2003-01-01

BACKGROUND Throughout this user guide, we refer to datasets that we used in conjunction with developing of this software for supporting cartographic research and producing the datasets to conduct research. However, this software can be used with these datasets or with more 'generic' versions of data of the appropriate type. For example, throughout the guide, we refer to national land cover data (NLCD) and digital elevation model (DEM) data from the U.S. Geological Survey (USGS) at a 30-m resolution, but any digital terrain model or land cover data at any appropriate resolution will produce results. Another key point to keep in mind is to use a consistent data resolution for all the datasets per model run. The U.S. Department of Agriculture (USDA) developed the Agricultural Nonpoint Source (AGNPS) pollution model of watershed hydrology in response to the complex problem of managing nonpoint sources of pollution. AGNPS simulates the behavior of runoff, sediment, and nutrient transport from watersheds that have agriculture as their prime use. The model operates on a cell basis and is a distributed parameter, event-based model. The model requires 22 input parameters. Output parameters are grouped primarily by hydrology, sediment, and chemical output (Young and others, 1995.) Elevation, land cover, and soil are the base data from which to extract the 22 input parameters required by the AGNPS. For automatic parameter extraction, follow the general process described in this guide of extraction from the geospatial data through the AGNPS Data Generator to generate input parameters required by the pollution model (Finn and others, 2002.)

The Infeasibility of Experimental Quantification of Life-Critical Software Reliability

NASA Technical Reports Server (NTRS)

Butler, Ricky W.; Finelli, George B.

1991-01-01

This paper affirms that quantification of life-critical software reliability is infeasible using statistical methods whether applied to standard software or fault-tolerant software. The key assumption of software fault tolerance|separately programmed versions fail independently|is shown to be problematic. This assumption cannot be justified by experimentation in the ultra-reliability region and subjective arguments in its favor are not sufficiently strong to justify it as an axiom. Also, the implications of the recent multi-version software experiments support this affirmation.

Study of fault tolerant software technology for dynamic systems

NASA Technical Reports Server (NTRS)

Caglayan, A. K.; Zacharias, G. L.

1985-01-01

The major aim of this study is to investigate the feasibility of using systems-based failure detection isolation and compensation (FDIC) techniques in building fault-tolerant software and extending them, whenever possible, to the domain of software fault tolerance. First, it is shown that systems-based FDIC methods can be extended to develop software error detection techniques by using system models for software modules. In particular, it is demonstrated that systems-based FDIC techniques can yield consistency checks that are easier to implement than acceptance tests based on software specifications. Next, it is shown that systems-based failure compensation techniques can be generalized to the domain of software fault tolerance in developing software error recovery procedures. Finally, the feasibility of using fault-tolerant software in flight software is investigated. In particular, possible system and version instabilities, and functional performance degradation that may occur in N-Version programming applications to flight software are illustrated. Finally, a comparative analysis of N-Version and recovery block techniques in the context of generic blocks in flight software is presented.

INM, integrated noise model, version 4.11 : user's guide, supplement

DOT National Transportation Integrated Search

1993-12-01

The Volpe National Transportation Systems Center, in support of the Federal Aviation Administration, Office of Environment and Energy, has developed Version 4.11 of the Integrated Noise Model (INM). This User's Guide is a supplement to INM, Version 3...

User's Guide for TOUGH2-MP - A Massively Parallel Version of the TOUGH2 Code

DOE Office of Scientific and Technical Information (OSTI.GOV)

Earth Sciences Division; Zhang, Keni; Zhang, Keni

TOUGH2-MP is a massively parallel (MP) version of the TOUGH2 code, designed for computationally efficient parallel simulation of isothermal and nonisothermal flows of multicomponent, multiphase fluids in one, two, and three-dimensional porous and fractured media. In recent years, computational requirements have become increasingly intensive in large or highly nonlinear problems for applications in areas such as radioactive waste disposal, CO2 geological sequestration, environmental assessment and remediation, reservoir engineering, and groundwater hydrology. The primary objective of developing the parallel-simulation capability is to significantly improve the computational performance of the TOUGH2 family of codes. The particular goal for the parallel simulator ismore » to achieve orders-of-magnitude improvement in computational time for models with ever-increasing complexity. TOUGH2-MP is designed to perform parallel simulation on multi-CPU computational platforms. An earlier version of TOUGH2-MP (V1.0) was based on the TOUGH2 Version 1.4 with EOS3, EOS9, and T2R3D modules, a software previously qualified for applications in the Yucca Mountain project, and was designed for execution on CRAY T3E and IBM SP supercomputers. The current version of TOUGH2-MP (V2.0) includes all fluid property modules of the standard version TOUGH2 V2.0. It provides computationally efficient capabilities using supercomputers, Linux clusters, or multi-core PCs, and also offers many user-friendly features. The parallel simulator inherits all process capabilities from V2.0 together with additional capabilities for handling fractured media from V1.4. This report provides a quick starting guide on how to set up and run the TOUGH2-MP program for users with a basic knowledge of running the (standard) version TOUGH2 code, The report also gives a brief technical description of the code, including a discussion of parallel methodology, code structure, as well as mathematical and numerical methods used. To familiarize users with the parallel code, illustrative sample problems are presented.« less

Provenance tracking for scientific software toolchains through on-demand release and archiving

NASA Astrophysics Data System (ADS)

Ham, David

2017-04-01

There is an emerging consensus that published computational science results must be backed by a provenance chain tying results to the exact versions of input data and the code which generated them. There is also now an impressive range of web services devoted to revision control of software, and the archiving in citeable form of both software and input data. However, much scientific software itself builds on libraries and toolkits, and these themselves have dependencies. Further, it is common for cutting edge research to depend on the latest version of software in online repositories, rather than the official release version. This creates a situation in which an author who wishes to follow best practice in recording the provenance chain of their results must archive and cite unreleased versions of a series of dependencies. Here, we present an alternative which toolkit authors can easily implement to provide a semi-automatic mechanism for creating and archiving custom software releases of the precise version of a package used in a particular simulation. This approach leverages the excellent services provided by GitHub and Zenodo to generate a connected set of citeable DOIs for the archived software. We present the integration of this workflow into the Firedrake automated finite element framework as a practical example of this approach in use on a complex geoscientific tool chain in practical use.

KAPAO first light: the design, construction and operation of a low-cost natural guide star adaptive optics system

NASA Astrophysics Data System (ADS)

Severson, Scott A.; Choi, Philip I.; Badham, Katherine E.; Bolger, Dalton; Contreras, Daniel S.; Gilbreth, Blaine N.; Guerrero, Christian; Littleton, Erik; Long, Joseph; McGonigle, Lorcan P.; Morrison, William A.; Ortega, Fernando; Rudy, Alex R.; Wong, Jonathan R.; Spjut, Erik; Baranec, Christoph; Riddle, Reed

2014-07-01

We present the instrument design and first light observations of KAPAO, a natural guide star adaptive optics (AO) system for the Pomona College Table Mountain Observatory (TMO) 1-meter telescope. The KAPAO system has dual science channels with visible and near-infrared cameras, a Shack-Hartmann wavefront sensor, and a commercially available 140-actuator MEMS deformable mirror. The pupil relays are two pairs of custom off-axis parabolas and the control system is based on a version of the Robo-AO control software. The AO system and telescope are remotely operable, and KAPAO is designed to share the Cassegrain focus with the existing TMO polarimeter. We discuss the extensive integration of undergraduate students in the program including the multiple senior theses/capstones and summer assistantships amongst our partner institutions. This material is based upon work supported by the National Science Foundation under Grant No. 0960343.

SBexpert users guide (version 2.0): a knowledge-based decision-support system for spruce beetle management.

Treesearch

Keith M. Reynolds; Edward H. Holsten

1997-01-01

SBexpert version 2.0 is a knowledge-based decision-support system for spruce beetle (Dendroctonus rufipennis (Kby.)) management developed for use in Microsoft (MS) Windows with the KnowledgePro Windows development language. Version 2.0 is a significant enhancement of version 1.0. The SBexpert users guide provides detailed instructions on the use of...

Microcomputers: Software Evaluation. Evaluation Guides. Guide Number 17.

ERIC Educational Resources Information Center

Gray, Peter J.

This guide discusses three critical steps in selecting microcomputer software and hardware: setting the context, software evaluation, and managing microcomputer use. Specific topics addressed include: (1) conducting an informal task analysis to determine how the potential user's time is spent; (2) identifying tasks amenable to computerization and…

High/Scope Buyer's Guide to Children's Software. 11th Edition.

ERIC Educational Resources Information Center

Hohmann, Charles; And Others

This 11th edition of the High/Scope Buyer's Guide to Children's Software was designed to help teachers, caregivers, and parents make good choices when purchasing software to enhance children's learning. The book consists of an introduction, a chapter on finding the best software, software reviews for 48 different software products. The…

Health software: a new CEI Guide for software management in medical environment.

PubMed

Giacomozzi, Claudia; Martelli, Francesco

2016-01-01

The increasing spread of software components in the healthcare context renders explanatory guides relevant and mandatory to interpret laws and standards, and to support safe management of software products in healthcare. In 2012 a working group has been settled for the above purposes at Italian Electrotechnical Committee (CEI), made of experts from Italian National Institute of Health (ISS), representatives of industry, and representatives of the healthcare organizations. As a first outcome of the group activity, Guide CEI 62-237 was published in February 2015. The Guide incorporates an innovative approach based on the proper contextualization of software products, either medical devices or not, to the specific healthcare scenario, and addresses the risk management of IT systems. The Guide provides operators and manufacturers with an interpretative support with many detailed examples to facilitate the proper contextualization and management of health software, in compliance with related European and international regulations and standards.

25 CFR 547.12 - What are the minimum technical standards for downloading on a Class II gaming system?

Code of Federal Regulations, 2013 CFR

2013-04-01

... limited to software, files, data, and prize schedules. (2) Downloads must use secure methodologies that... date of the completion of the download; (iii) The Class II gaming system components to which software was downloaded; (iv) The version(s) of download package and any software downloaded. Logging of the...

25 CFR 547.12 - What are the minimum technical standards for downloading on a Class II gaming system?

Code of Federal Regulations, 2014 CFR

2014-04-01

... limited to software, files, data, and prize schedules. (2) Downloads must use secure methodologies that... date of the completion of the download; (iii) The Class II gaming system components to which software was downloaded; (iv) The version(s) of download package and any software downloaded. Logging of the...

Three-dimensional planning and use of patient-specific guides improve glenoid component position: an in vitro study.

PubMed

Walch, Gilles; Vezeridis, Peter S; Boileau, Pascal; Deransart, Pierric; Chaoui, Jean

2015-02-01

Glenoid component positioning is a key factor for success in total shoulder arthroplasty. Three-dimensional (3D) measurements of glenoid retroversion, inclination, and humeral head subluxation are helpful tools for preoperative planning. The purpose of this study was to assess the reliability and precision of a novel surgical method for placing the glenoid component with use of patient-specific templates created by preoperative surgical planning and 3D modeling. A preoperative computed tomography examination of cadaveric scapulae (N = 18) was performed. The glenoid implants were virtually placed, and patient-specific guides were created to direct the guide pin into the desired orientation and position in the glenoid. The 3D orientation and position of the guide pin were evaluated by performing a postoperative computed tomography scan for each scapula. The differences between the preoperative planning and the achieved result were analyzed. The mean error in 3D orientation of the guide pin was 2.39°, the mean entry point position error was 1.05 mm, and the mean inclination angle error was 1.42°. The average error in the version angle was 1.64°. There were no technical difficulties or complications related to use of patient-specific guides for guide pin placement. Quantitative analysis of guide pin positioning demonstrated a good correlation between preoperative planning and the achieved position of the guide pin. This study demonstrates the reliability and precision of preoperative planning software and patient-specific guides for glenoid component placement in total shoulder arthroplasty. Copyright © 2015. Published by Elsevier Inc.

An implementation of the NiftyRec medical imaging library for PIXE-tomography reconstruction

NASA Astrophysics Data System (ADS)

Michelet, C.; Barberet, P.; Desbarats, P.; Giovannelli, J.-F.; Schou, C.; Chebil, I.; Delville, M.-H.; Gordillo, N.; Beasley, D. G.; Devès, G.; Moretto, P.; Seznec, H.

2017-08-01

A new development of the TomoRebuild software package is presented, including ;thick sample; correction for non linear X-ray production (NLXP) and X-ray absorption (XA). As in the previous versions, C++ programming with standard libraries was used for easier portability. Data reduction requires different steps which may be run either from a command line instruction or via a user friendly interface, developed as a portable Java plugin in ImageJ. All experimental and reconstruction parameters can be easily modified, either directly in the ASCII parameter files or via the ImageJ interface. A detailed user guide in English is provided. Sinograms and final reconstructed images are generated in usual binary formats that can be read by most public domain graphic softwares. New MLEM and OSEM methods are proposed, using optimized methods from the NiftyRec medical imaging library. An overview of the different medical imaging methods that have been used for ion beam microtomography applications is presented. In TomoRebuild, PIXET data reduction is performed for each chemical element independently and separately from STIMT, except for two steps where the fusion of STIMT and PIXET data is required: the calculation of the correction matrix and the normalization of PIXET data to obtain mass fraction distributions. Correction matrices for NLXP and XA are calculated using procedures extracted from the DISRA code, taking into account a large X-ray detection solid angle. For this, the 3D STIMT mass density distribution is used, considering a homogeneous global composition. A first example of PIXET experiment using two detectors is presented. Reconstruction results are compared and found in good agreement between different codes: FBP, NiftyRec MLEM and OSEM of the TomoRebuild software package, the original DISRA, its accelerated version provided in JPIXET and the accelerated MLEM version of JPIXET, with or without correction.

Software Engineering Laboratory (SEL) data base reporting software user's guide and system description. Volume 1: Introduction and user's guide

NASA Technical Reports Server (NTRS)

1983-01-01

Reporting software programs provide formatted listings and summary reports of the Software Engineering Laboratory (SEL) data base contents. The operating procedures and system information for 18 different reporting software programs are described. Sample output reports from each program are provided.

GOCE User Toolbox and Tutorial

NASA Astrophysics Data System (ADS)

Benveniste, Jérôme; Knudsen, Per

2016-07-01

The GOCE User Toolbox GUT is a compilation of tools for the utilisation and analysis of GOCE Level 2 products. GUT support applications in Geodesy, Oceanography and Solid Earth Physics. The GUT Tutorial provides information and guidance in how to use the toolbox for a variety of applications. GUT consists of a series of advanced computer routines that carry out the required computations. It may be used on Windows PCs, UNIX/Linux Workstations, and Mac. The toolbox is supported by The GUT Algorithm Description and User Guide and The GUT Install Guide. A set of a-priori data and models are made available as well. Without any doubt the development of the GOCE user toolbox have played a major role in paving the way to successful use of the GOCE data for oceanography. The GUT version 2.2 was released in April 2014 and beside some bug-fixes it adds the capability for the computation of Simple Bouguer Anomaly (Solid-Earth). During this fall a new GUT version 3 has been released. GUTv3 was further developed through a collaborative effort where the scientific communities participate aiming on an implementation of remaining functionalities facilitating a wider span of research in the fields of Geodesy, Oceanography and Solid earth studies. Accordingly, the GUT version 3 has: - An attractive and easy to use Graphic User Interface (GUI) for the toolbox, - Enhance the toolbox with some further software functionalities such as to facilitate the use of gradients, anisotropic diffusive filtering and computation of Bouguer and isostatic gravity anomalies. - An associated GUT VCM tool for analyzing the GOCE variance covariance matrices.

The predictive information obtained by testing multiple software versions

NASA Technical Reports Server (NTRS)

Lee, Larry D.

1987-01-01

Multiversion programming is a redundancy approach to developing highly reliable software. In applications of this method, two or more versions of a program are developed independently by different programmers and the versions are combined to form a redundant system. One variation of this approach consists of developing a set of n program versions and testing the versions to predict the failure probability of a particular program or a system formed from a subset of the programs. The precision that might be obtained, and also the effect of programmer variability if predictions are made over repetitions of the process of generating different program versions, are examined.

nu-TRLan User Guide Version 1.0: A High-Performance Software Package for Large-Scale Harmitian Eigenvalue Problems

DOE Office of Scientific and Technical Information (OSTI.GOV)

Yamazaki, Ichitaro; Wu, Kesheng; Simon, Horst

2008-10-27

The original software package TRLan, [TRLan User Guide], page 24, implements the thick restart Lanczos method, [Wu and Simon 2001], page 24, for computing eigenvalues {lambda} and their corresponding eigenvectors v of a symmetric matrix A: Av = {lambda}v. Its effectiveness in computing the exterior eigenvalues of a large matrix has been demonstrated, [LBNL-42982], page 24. However, its performance strongly depends on the user-specified dimension of a projection subspace. If the dimension is too small, TRLan suffers from slow convergence. If it is too large, the computational and memory costs become expensive. Therefore, to balance the solution convergence and costs,more » users must select an appropriate subspace dimension for each eigenvalue problem at hand. To free users from this difficult task, nu-TRLan, [LNBL-1059E], page 23, adjusts the subspace dimension at every restart such that optimal performance in solving the eigenvalue problem is automatically obtained. This document provides a user guide to the nu-TRLan software package. The original TRLan software package was implemented in Fortran 90 to solve symmetric eigenvalue problems using static projection subspace dimensions. nu-TRLan was developed in C and extended to solve Hermitian eigenvalue problems. It can be invoked using either a static or an adaptive subspace dimension. In order to simplify its use for TRLan users, nu-TRLan has interfaces and features similar to those of TRLan: (1) Solver parameters are stored in a single data structure called trl-info, Chapter 4 [trl-info structure], page 7. (2) Most of the numerical computations are performed by BLAS, [BLAS], page 23, and LAPACK, [LAPACK], page 23, subroutines, which allow nu-TRLan to achieve optimized performance across a wide range of platforms. (3) To solve eigenvalue problems on distributed memory systems, the message passing interface (MPI), [MPI forum], page 23, is used. The rest of this document is organized as follows. In Chapter 2 [Installation], page 2, we provide an installation guide of the nu-TRLan software package. In Chapter 3 [Example], page 3, we present a simple nu-TRLan example program. In Chapter 4 [trl-info structure], page 7, and Chapter 5 [trlan subroutine], page 14, we describe the solver parameters and interfaces in detail. In Chapter 6 [Solver parameters], page 21, we discuss the selection of the user-specified parameters. In Chapter 7 [Contact information], page 22, we give the acknowledgements and contact information of the authors. In Chapter 8 [References], page 23, we list reference to related works.« less

A theoretical basis for the analysis of redundant software subject to coincident errors

NASA Technical Reports Server (NTRS)

Eckhardt, D. E., Jr.; Lee, L. D.

1985-01-01

Fundamental to the development of redundant software techniques fault-tolerant software, is an understanding of the impact of multiple-joint occurrences of coincident errors. A theoretical basis for the study of redundant software is developed which provides a probabilistic framework for empirically evaluating the effectiveness of the general (N-Version) strategy when component versions are subject to coincident errors, and permits an analytical study of the effects of these errors. The basic assumptions of the model are: (1) independently designed software components are chosen in a random sample; and (2) in the user environment, the system is required to execute on a stationary input series. The intensity of coincident errors, has a central role in the model. This function describes the propensity to introduce design faults in such a way that software components fail together when executing in the user environment. The model is used to give conditions under which an N-Version system is a better strategy for reducing system failure probability than relying on a single version of software. A condition which limits the effectiveness of a fault-tolerant strategy is studied, and it is posted whether system failure probability varies monotonically with increasing N or whether an optimal choice of N exists.

GSC configuration management plan

NASA Technical Reports Server (NTRS)

Withers, B. Edward

1990-01-01

The tools and methods used for the configuration management of the artifacts (including software and documentation) associated with the Guidance and Control Software (GCS) project are described. The GCS project is part of a software error studies research program. Three implementations of GCS are being produced in order to study the fundamental characteristics of the software failure process. The Code Management System (CMS) is used to track and retrieve versions of the documentation and software. Application of the CMS for this project is described and the numbering scheme is delineated for the versions of the project artifacts.

A tool to include gamma analysis software into a quality assurance program.

PubMed

Agnew, Christina E; McGarry, Conor K

2016-03-01

To provide a tool to enable gamma analysis software algorithms to be included in a quality assurance (QA) program. Four image sets were created comprising two geometric images to independently test the distance to agreement (DTA) and dose difference (DD) elements of the gamma algorithm, a clinical step and shoot IMRT field and a clinical VMAT arc. The images were analysed using global and local gamma analysis with 2 in-house and 8 commercially available software encompassing 15 software versions. The effect of image resolution on gamma pass rates was also investigated. All but one software accurately calculated the gamma passing rate for the geometric images. Variation in global gamma passing rates of 1% at 3%/3mm and over 2% at 1%/1mm was measured between software and software versions with analysis of appropriately sampled images. This study provides a suite of test images and the gamma pass rates achieved for a selection of commercially available software. This image suite will enable validation of gamma analysis software within a QA program and provide a frame of reference by which to compare results reported in the literature from various manufacturers and software versions. Copyright © 2015. Published by Elsevier Ireland Ltd.

Exploration Guides as a Strategy to Improve the Effectiveness of Educational Software in Chemistry

ERIC Educational Resources Information Center

Paiva, Joao Carlos; da Costa, Luiza Alves

2010-01-01

Guiding students while they explore educational software is important in order to convey the pedagogical pragmatism that many programs seem to lack. This article points out some characteristics that we believe educational software exploration guides must contain for students to benefit from using these programs. The supporting information includes…

Smiths Medical Medfusion 3010a syringe pump may overinfuse if software is outdated.

PubMed

2010-04-01

Smiths Medical Medfusion 3010a syringe pumps that aren't equipped with the latest software version (2.0.6) could overinfuse if the "recall last settings" function is used following an infusion in volume/time mode. If your facility has pumps equipped with software versions older than 2.0.6, contact Smiths Medical to obtain an upgrade.

Police Allocation Manual User's Guide: Determination of the Number and Allocation of Personnel for Patrol Services for State Police Departments (Special Version - April 1993)

DOT National Transportation Integrated Search

1993-04-01

The Police Allocation Manual User's Guide (herein after referred to as the Guide) : is intended as a companion document to the Police Allocation Manual (PAM), : Special Version, which can be used to determine the number and allocation of : personnel ...

User's Guide for Evaluating Subsurface Vapor Intrusion into Buildings

EPA Pesticide Factsheets

This revised version of the User's Guide corresponds with the release of Version 3.1 of the Johnson and Ettinger (1991) model (J E) spreadsheets for estimating subsurface vapor intrusion into buildings.

Numerical Arc Segmentation Algorithm for a Radio Conference-NASARC (version 4.0) technical manual

NASA Technical Reports Server (NTRS)

Whyte, Wayne A., Jr.; Heyward, Ann O.; Ponchak, Denise S.; Spence, Rodney L.; Zuzek, John E.

1988-01-01

The information contained in the NASARC (Version 4.0) Technical Manual and NASARC (Version 4.0) User's Manual relates to the Numerical Arc Segmentation Algorithm for a Radio Conference (NASARC) software development through November 1, 1988. The Technical Manual describes the NASARC concept and the algorithms used to implement the concept. The User's Manual provides information on computer system considerations, installation instructions, description of input files, and program operation instructions. Significant revisions were incorporated in the Version 4.0 software over prior versions. These revisions have further enhanced the modeling capabilities of the NASARC procedure and provide improved arrangements of predetermined arcs within the geostationary orbits. Array dimensions within the software were structured to fit within the currently available 12 megabyte memory capacity of the International Frequency Registration Board (IFRB) computer facility. A piecewise approach to predetermined arc generation in NASARC (Version 4.0) allows worldwide planning problem scenarios to be accommodated within computer run time and memory constraints with enhanced likelihood and ease of solution.

IGT-Open: An open-source, computerized version of the Iowa Gambling Task.

PubMed

Dancy, Christopher L; Ritter, Frank E

2017-06-01

The Iowa Gambling Task (IGT) is commonly used to understand the processes involved in decision-making. Though the task was originally run without a computer, using a computerized version of the task has become typical. These computerized versions of the IGT are useful, because they can make the task more standardized across studies and allow for the task to be used in environments where a physical version of the task may be difficult or impossible to use (e.g., while collecting brain imaging data). Though these computerized versions of the IGT have been useful for experimentation, having multiple software implementations of the task could present reliability issues. We present an open-source software version of the Iowa Gambling Task (called IGT-Open) that allows for millisecond visual presentation accuracy and is freely available to be used and modified. This software has been used to collect data from human subjects and also has been used to run model-based simulations with computational process models developed to run in the ACT-R architecture.

Software packager user's guide

NASA Technical Reports Server (NTRS)

Callahan, John R.

1995-01-01

Software integration is a growing area of concern for many programmers and software managers because the need to build new programs quickly from existing components is greater than ever. This includes building versions of software products for multiple hardware platforms and operating systems, building programs from components written in different languages, and building systems from components that must execute on different machines in a distributed network. The goal of software integration is to make building new programs from existing components more seamless -- programmers should pay minimal attention to the underlying configuration issues involved. Libraries of reusable components and classes are important tools but only partial solutions to software development problems. Even though software components may have compatible interfaces, there may be other reasons, such as differences between execution environments, why they cannot be integrated. Often, components must be adapted or reimplemented to fit into another application because of implementation differences -- they are implemented in different programming languages, dependent on different operating system resources, or must execute on different physical machines. The software packager is a tool that allows programmers to deal with interfaces between software components and ignore complex integration details. The packager takes modular descriptions of the structure of a software system written in the package specification language and produces an integration program in the form of a makefile. If complex integration tools are needed to integrate a set of components, such as remote procedure call stubs, their use is implied by the packager automatically and stub generation tools are invoked in the corresponding makefile. The programmer deals only with the components themselves and not the details of how to build the system on any given platform.

The 1989 Educational Software Preview Guide.

ERIC Educational Resources Information Center

Educational Software Evaluation Consortium, Menlo Park, CA.

Developed to help educators locate microcomputer software programs they may want to preview for students in grades K-12, this guide lists commercially available instructional software programs that have been favorably reviewed by members of the Educational Software Evaluation Consortium. Programs are arranged alphabetically by title within…

CMMI (registered trademark) for Services, Version 1.2

DTIC Science & Technology

2009-02-01

background in information technology, especially those familiar with disciplines like service - oriented architecture (SOA) or software as a service ( SaaS ). In... services , the Software Engineering Institute (SEI) has found several dimensions that an organization can focus on to improve its business. Figure...International Business Machines) and the SEI [Humphrey 1989]. Humphrey’s book, Managing the Software Process, provides a CMMI for Services Version 1.2

The Supertree Toolkit 2: a new and improved software package with a Graphical User Interface for supertree construction.

PubMed

Hill, Jon; Davis, Katie E

2014-01-01

Building large supertrees involves the collection, storage, and processing of thousands of individual phylogenies to create large phylogenies with thousands to tens of thousands of taxa. Such large phylogenies are useful for macroevolutionary studies, comparative biology and in conservation and biodiversity. No easy to use and fully integrated software package currently exists to carry out this task. Here, we present a new Python-based software package that uses well defined XML schema to manage both data and metadata. It builds on previous versions by 1) including new processing steps, such as Safe Taxonomic Reduction, 2) using a user-friendly GUI that guides the user to complete at least the minimum information required and includes context-sensitive documentation, and 3) a revised storage format that integrates both tree- and meta-data into a single file. These data can then be manipulated according to a well-defined, but flexible, processing pipeline using either the GUI or a command-line based tool. Processing steps include standardising names, deleting or replacing taxa, ensuring adequate taxonomic overlap, ensuring data independence, and safe taxonomic reduction. This software has been successfully used to store and process data consisting of over 1000 trees ready for analyses using standard supertree methods. This software makes large supertree creation a much easier task and provides far greater flexibility for further work.

The 1990-91 Educational Software Preview Guide.

ERIC Educational Resources Information Center

Best, Anita, Ed.; And Others

Developed to help educators locate microcomputer software programs they may want to preview for students in grades K-12, this guide lists commercially available microcomputer software programs that have been favorably reviewed by members of the Educational Software Evaluation Consortium. Programs are arranged alphabetically by title within…

Diagnostic Analyzer for Gearboxes (DAG): User's Guide. Version 3.1 for Microsoft Windows 3.1

NASA Technical Reports Server (NTRS)

Jammu, Vinay B.; Kourosh, Danai

1997-01-01

This documentation describes the Diagnostic Analyzer for Gearboxes (DAG) software for performing fault diagnosis of gearboxes. First, the user would construct a graphical representation of the gearbox using the gear, bearing, shaft, and sensor tools contained in the DAG software. Next, a set of vibration features obtained by processing the vibration signals recorded from the gearbox using a signal analyzer is required. Given this information, the DAG software uses an unsupervised neural network referred to as the Fault Detection Network (FDN) to identify the occurrence of faults, and a pattern classifier called Single Category-Based Classifier (SCBC) for abnormality scaling of individual vibration features. The abnormality-scaled vibration features are then used as inputs to a Structure-Based Connectionist Network (SBCN) for identifying faults in gearbox subsystems and components. The weights of the SBCN represent its diagnostic knowledge and are derived from the structure of the gearbox graphically presented in DAG. The outputs of SBCN are fault possibility values between 0 and 1 for individual subsystems and components in the gearbox with a 1 representing a definite fault and a 0 representing normality. This manual describes the steps involved in creating the diagnostic gearbox model, along with the options and analysis tools of the DAG software.

Transferable Output ASCII Data (TOAD) editor version 1.0 user's guide

NASA Technical Reports Server (NTRS)

Bingel, Bradford D.; Shea, Anne L.; Hofler, Alicia S.

1991-01-01

The Transferable Output ASCII Data (TOAD) editor is an interactive software tool for manipulating the contents of TOAD files. The TOAD editor is specifically designed to work with tabular data. Selected subsets of data may be displayed to the user's screen, sorted, exchanged, duplicated, removed, replaced, inserted, or transferred to and from external files. It also offers a number of useful features including on-line help, macros, a command history, an 'undo' option, variables, and a full compliment of mathematical functions and conversion factors. Written in ANSI FORTRAN 77 and completely self-contained, the TOAD editor is very portable and has already been installed on SUN, SGI/IRIS, and CONVEX hosts.

Microgrid Design Toolkit (MDT) User Guide Software v1.2.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Eddy, John P.

2017-08-01

The Microgrid Design Toolkit (MDT) supports decision analysis for new ("greenfield") microgrid designs as well as microgrids with existing infrastructure. The current version of MDT includes two main capabilities. The first capability, the Microgrid Sizing Capability (MSC), is used to determine the size and composition of a new, grid connected microgrid in the early stages of the design process. MSC is focused on developing a microgrid that is economically viable when connected to the grid. The second capability is focused on designing a microgrid for operation in islanded mode. This second capability relies on two models: the Technology Management Optimizationmore » (TMO) model and Performance Reliability Model (PRM).« less

Concentrations of indoor pollutants (CIP) database user's manual (Version 4. 0)

DOE Office of Scientific and Technical Information (OSTI.GOV)

Apte, M.G.; Brown, S.R.; Corradi, C.A.

1990-10-01

This is the latest release of the database and the user manual. The user manual is a tutorial and reference for utilizing the CIP Database system. An installation guide is included to cover various hardware configurations. Numerous examples and explanations of the dialogue between the user and the database program are provided. It is hoped that this resource will, along with on-line help and the menu-driven software, make for a quick and easy learning curve. For the purposes of this manual, it is assumed that the user is acquainted with the goals of the CIP Database, which are: (1) tomore » collect existing measurements of concentrations of indoor air pollutants in a user-oriented database and (2) to provide a repository of references citing measured field results openly accessible to a wide audience of researchers, policy makers, and others interested in the issues of indoor air quality. The database software, as distinct from the data, is contained in two files, CIP. EXE and PFIL.COM. CIP.EXE is made up of a number of programs written in dBase III command code and compiled using Clipper into a single, executable file. PFIL.COM is a program written in Turbo Pascal that handles the output of summary text files and is called from CIP.EXE. Version 4.0 of the CIP Database is current through March 1990.« less

Software Design Description for the Polar Ice Prediction System (PIPS) Version 3.0

DTIC Science & Technology

2008-11-05

Naval Research Laboratory Stennis Space Center, MS 39529-5004 NRL/MR/7320--08-9150 Approved for public release; distribution is unlimited. Software ...collection of information, including suggestions for reducing this burden to Department of Defense, Washington Headquarters Services , Directorate for...THIS PAGE 18. NUMBER OF PAGES 17. LIMITATION OF ABSTRACT Software Design Description for the Polar Ice Prediction System (PIPS) Version 3.0 Pamela G

Software Design Description for the Navy Coastal Ocean Model (NCOM) Version 4.0

DTIC Science & Technology

2008-12-31

Naval Research Laboratory Stennis Space Center, MS 39529-5004 NRL/MR/7320--08-9149 Approved for public release; distribution is unlimited. Software ...suggestions for reducing this burden to Department of Defense, Washington Headquarters Services , Directorate for Information Operations and Reports (0704...LIMITATION OF ABSTRACT Software Design Description for the Navy Coastal Ocean Model (NCOM) Version 4.0 Paul Martin, Charlie N. Barron, Lucy F

What is meant by Format Version? Product Version? Collection?

Atmospheric Science Data Center

2017-10-12

The format Version is used to distinguish between software deliveries to ASDC that result in a product format change. The format version is given in the MISR data file name using the designator _Fnn_ where nn is the version number. ...

FHWA traffic noise model, version 1.0 : user's guide

DOT National Transportation Integrated Search

1998-01-01

This User's Guide is for the Federal Highway Administration's Traffic Noise Model (FHWA TNM), Version 1.0 -- the FHWAs computer program for highway traffic noise prediction and analysis. Two companion reports, a Technical Manual and a data repor...

SWToolbox: A surface-water tool-box for statistical analysis of streamflow time series

USGS Publications Warehouse

Kiang, Julie E.; Flynn, Kate; Zhai, Tong; Hummel, Paul; Granato, Gregory

2018-03-07

This report is a user guide for the low-flow analysis methods provided with version 1.0 of the Surface Water Toolbox (SWToolbox) computer program. The software combines functionality from two software programs—U.S. Geological Survey (USGS) SWSTAT and U.S. Environmental Protection Agency (EPA) DFLOW. Both of these programs have been used primarily for computation of critical low-flow statistics. The main analysis methods are the computation of hydrologic frequency statistics such as the 7-day minimum flow that occurs on average only once every 10 years (7Q10), computation of design flows including biologically based flows, and computation of flow-duration curves and duration hydrographs. Other annual, monthly, and seasonal statistics can also be computed. The interface facilitates retrieval of streamflow discharge data from the USGS National Water Information System and outputs text reports for a record of the analysis. Tools for graphing data and screening tests are available to assist the analyst in conducting the analysis.

PRISM: Processing routines in IDL for spectroscopic measurements (installation manual and user's guide, version 1.0)

USGS Publications Warehouse

Kokaly, Raymond F.

2011-01-01

This report describes procedures for installing and using the U.S. Geological Survey Processing Routines in IDL for Spectroscopic Measurements (PRISM) software. PRISM provides a framework to conduct spectroscopic analysis of measurements made using laboratory, field, airborne, and space-based spectrometers. Using PRISM functions, the user can compare the spectra of materials of unknown composition with reference spectra of known materials. This spectroscopic analysis allows the composition of the material to be identified and characterized. Among its other functions, PRISM contains routines for the storage of spectra in database files, import/export of ENVI spectral libraries, importation of field spectra, correction of spectra to absolute reflectance, arithmetic operations on spectra, interactive continuum removal and comparison of spectral features, correction of imaging spectrometer data to ground-calibrated reflectance, and identification and mapping of materials using spectral feature-based analysis of reflectance data. This report provides step-by-step instructions for installing the PRISM software and running its functions.

Version 2.0 Visual Sample Plan (VSP): UXO Module Code Description and Verification

DOE Office of Scientific and Technical Information (OSTI.GOV)

Gilbert, Richard O.; Wilson, John E.; O'Brien, Robert F.

2003-05-06

The Pacific Northwest National Laboratory (PNNL) is developing statistical methods for determining the amount of geophysical surveys conducted along transects (swaths) that are needed to achieve specified levels of confidence of finding target areas (TAs) of anomalous readings and possibly unexploded ordnance (UXO) at closed, transferring and transferred (CTT) Department of Defense (DoD) ranges and other sites. The statistical methods developed by PNNL have been coded into the UXO module of the Visual Sample Plan (VSP) software code that is being developed by PNNL with support from the DoD, the U.S. Department of Energy (DOE, and the U.S. Environmental Protectionmore » Agency (EPA). (The VSP software and VSP Users Guide (Hassig et al, 2002) may be downloaded from http://dqo.pnl.gov/vsp.) This report describes and documents the statistical methods developed and the calculations and verification testing that have been conducted to verify that VSPs implementation of these methods is correct and accurate.« less

DSISoft—a MATLAB VSP data processing package

NASA Astrophysics Data System (ADS)

Beaty, K. S.; Perron, G.; Kay, I.; Adam, E.

2002-05-01

DSISoft is a public domain vertical seismic profile processing software package developed at the Geological Survey of Canada. DSISoft runs under MATLAB version 5.0 and above and hence is portable between computer operating systems supported by MATLAB (i.e. Unix, Windows, Macintosh, Linux). The package includes processing modules for reading and writing various standard seismic data formats, performing data editing, sorting, filtering, and other basic processing modules. The processing sequence can be scripted allowing batch processing and easy documentation. A structured format has been developed to ensure future additions to the package are compatible with existing modules. Interactive modules have been created using MATLAB's graphical user interface builder for displaying seismic data, picking first break times, examining frequency spectra, doing f- k filtering, and plotting the trace header information. DSISoft modular design facilitates the incorporation of new processing algorithms as they are developed. This paper gives an overview of the scope of the software and serves as a guide for the addition of new modules.

All-Ages Lead Model (Aalm) Version 1.05 (External Draft Report)

EPA Science Inventory

The All-Ages Lead Model (AALM) Version 1.05, is an external review draft software and guidance manual. EPA released this software and associated documentation for public review and comment beginning September 27, 2005, until October 27, 2005. The public comments will be accepte...

GeoGebra 3D from the Perspectives of Elementary Pre-Service Mathematics Teachers Who Are Familiar with a Number of Software Programs

ERIC Educational Resources Information Center

Baltaci, Serdal; Yildiz, Avni

2015-01-01

Each new version of the GeoGebra dynamic mathematics software goes through updates and innovations. One of these innovations is the GeoGebra 5.0 version. This version aims to facilitate 3D instruction by offering opportunities for students to analyze 3D objects. While scanning the previous studies of GeoGebra 3D, it is seen that they mainly focus…

Beyond filtered backprojection: A reconstruction software package for ion beam microtomography data

NASA Astrophysics Data System (ADS)

Habchi, C.; Gordillo, N.; Bourret, S.; Barberet, Ph.; Jovet, C.; Moretto, Ph.; Seznec, H.

2013-01-01

A new version of the TomoRebuild data reduction software package is presented, for the reconstruction of scanning transmission ion microscopy tomography (STIMT) and particle induced X-ray emission tomography (PIXET) images. First, we present a state of the art of the reconstruction codes available for ion beam microtomography. The algorithm proposed here brings several advantages. It is a portable, multi-platform code, designed in C++ with well-separated classes for easier use and evolution. Data reduction is separated in different steps and the intermediate results may be checked if necessary. Although no additional graphic library or numerical tool is required to run the program as a command line, a user friendly interface was designed in Java, as an ImageJ plugin. All experimental and reconstruction parameters may be entered either through this plugin or directly in text format files. A simple standard format is proposed for the input of experimental data. Optional graphic applications using the ROOT interface may be used separately to display and fit energy spectra. Regarding the reconstruction process, the filtered backprojection (FBP) algorithm, already present in the previous version of the code, was optimized so that it is about 10 times as fast. In addition, Maximum Likelihood Expectation Maximization (MLEM) and its accelerated version Ordered Subsets Expectation Maximization (OSEM) algorithms were implemented. A detailed user guide in English is available. A reconstruction example of experimental data from a biological sample is given. It shows the capability of the code to reduce noise in the sinograms and to deal with incomplete data, which puts a new perspective on tomography using low number of projections or limited angle.

Patient-specific targeting guides compared with traditional instrumentation for glenoid component placement in shoulder arthroplasty: a multi-surgeon study in 70 arthritic cadaver specimens.

PubMed

Throckmorton, Thomas W; Gulotta, Lawrence V; Bonnarens, Frank O; Wright, Stephen A; Hartzell, Jeffrey L; Rozzi, William B; Hurst, Jason M; Frostick, Simon P; Sperling, John W

2015-06-01

The purpose of this study was to compare the accuracy of patient-specific guides for total shoulder arthroplasty (TSA) with traditional instrumentation in arthritic cadaver shoulders. We hypothesized that the patient-specific guides would place components more accurately than standard instrumentation. Seventy cadaver shoulders with radiographically confirmed arthritis were randomized in equal groups to 5 surgeons of varying experience levels who were not involved in development of the patient-specific guidance system. Specimens were then randomized to patient-specific guides based off of computed tomography scanning, standard instrumentation, and anatomic TSA or reverse TSA. Variances in version or inclination of more than 10° and more than 4 mm in starting point were considered indications of significant component malposition. TSA glenoid components placed with patient-specific guides averaged 5° of deviation from the intended position in version and 3° in inclination; those with standard instrumentation averaged 8° of deviation in version and 7° in inclination. These differences were significant for version (P = .04) and inclination (P = .01). Multivariate analysis of variance to compare the overall accuracy for the entire cohort (TSA and reverse TSA) revealed patient-specific guides to be significantly more accurate (P = .01) for the combined vectors of version and inclination. Patient-specific guides also had fewer instances of significant component malposition than standard instrumentation did. Patient-specific targeting guides were more accurate than traditional instrumentation and had fewer instances of component malposition for glenoid component placement in this multi-surgeon cadaver study of arthritic shoulders. Long-term clinical studies are needed to determine if these improvements produce improved functional outcomes. Copyright © 2015 Journal of Shoulder and Elbow Surgery Board of Trustees. Published by Elsevier Inc. All rights reserved.

The Environment for Application Software Integration and Execution (EASIE), version 1.0. Volume 2: Program integration guide

NASA Technical Reports Server (NTRS)

Jones, Kennie H.; Randall, Donald P.; Stallcup, Scott S.; Rowell, Lawrence F.

1988-01-01

The Environment for Application Software Integration and Execution, EASIE, provides a methodology and a set of software utility programs to ease the task of coordinating engineering design and analysis codes. EASIE was designed to meet the needs of conceptual design engineers that face the task of integrating many stand-alone engineering analysis programs. Using EASIE, programs are integrated through a relational data base management system. In volume 2, the use of a SYSTEM LIBRARY PROCESSOR is used to construct a DATA DICTIONARY describing all relations defined in the data base, and a TEMPLATE LIBRARY. A TEMPLATE is a description of all subsets of relations (including conditional selection criteria and sorting specifications) to be accessed as input or output for a given application. Together, these form the SYSTEM LIBRARY which is used to automatically produce the data base schema, FORTRAN subroutines to retrieve/store data from/to the data base, and instructions to a generic REVIEWER program providing review/modification of data for a given template. Automation of these functions eliminates much of the tedious, error prone work required by the usual approach to data base integration.

Numerical Arc Segmentation Algorithm for a Radio Conference (NASARC), version 4.0: User's manual

NASA Technical Reports Server (NTRS)

Whyte, Wayne A., Jr.; Heyward, Ann O.; Ponchak, Denise S.; Spence, Rodney L.; Zuzek, John E.

1988-01-01

The information in the NASARC (Version 4.0) Technical Manual (NASA-TM-101453) and NASARC (Version 4.0) User's Manual (NASA-TM-101454) relates to the state of Numerical Arc Segmentation Algorithm for a Radio Conference (NASARC) software development through November 1, 1988. The Technical Manual describes the NASARC concept and the algorithms used to implement the concept. The User's Manual provides information on computer system considerations, installation instructions, description of input files, and program operation instructions. Significant revisions were incorporated in the Version 4.0 software over prior versions. These revisions have further enhanced the modeling capabilities of the NASARC procedure and provide improved arrangements of predetermined arcs within the geostationary orbit. Array dimensions within the software were structured to fit within the currently available 12-megabyte memory capacity of the International Frequency Registration Board (IFRB) computer facility. A piecewise approach to predetermined arc generation in NASARC (Version 4.) allows worldwide planning problem scenarios to be accommodated within computer run time and memory constraints with enhanced likelihood and ease of solution.

Numerical Arc Segmentation Algorithm for a Radio Conference-NASARC, Version 2.0: User's Manual

NASA Technical Reports Server (NTRS)

Whyte, Wayne A., Jr.; Heyward, Ann O.; Ponchak, Denise S.; Spence, Rodney L.; Zuzek, John E.

1987-01-01

The information contained in the NASARC (Version 2.0) Technical Manual (NASA TM-100160) and the NASARC (Version 2.0) User's Manual (NASA TM-100161) relates to the state of the Numerical Arc Segmentation Algorithm for a Radio Conference (NASARC) software development through October 16, 1987. The technical manual describes the NASARC concept and the algorithms which are used to implement it. The User's Manual provides information on computer system considerations, installation instructions, description of input files, and program operation instructions. Significant revisions have been incorporated in the Version 2.0 software over prior versions. These revisions have enhanced the modeling capabilities of the NASARC procedure while greatly reducing the computer run time and memory requirements. Array dimensions within the software have been structured to fit into the currently available 6-megabyte memory capacity of the International Frequency Registration Board (IFRB) computer facility. A piecewise approach to predetermined arc generation in NASARC (Version 2.0) allows worldwide scenarios to be accommodated within these memory constraints while at the same time reducing computer run time.

Source Code Analysis Laboratory (SCALe) for Energy Delivery Systems

DTIC Science & Technology

2010-12-01

the software for reevaluation. Once the ree- valuation process is completed, CERT provides the client a report detailing the software’s con - formance...Flagged Nonconformities (FNC) Software System TP/FNC Ratio Mozilla Firefox version 2.0 6/12 50% Linux kernel version 2.6.15 10/126 8% Wine...inappropriately tuned for analysis of the Linux kernel, which has anomalous results. Customizing SCALe to work with energy system software will help

RESULTS OF QA/QC TESTING OF EPA BENCHMARK DOSE SOFTWARE VERSION 1.2

EPA Science Inventory

EPA is developing benchmark dose software (BMDS) to support cancer and non-cancer dose-response assessments. Following the recent public review of BMDS version 1.1b, EPA developed a Hill model for evaluating continuous data, and improved the user interface and Multistage, Polyno...

Making Enzyme Kinetics Dynamic via Simulation Software

ERIC Educational Resources Information Center

Potratz, Jeffrey P.

2017-01-01

An interactive classroom demonstration that enhances students' knowledge of steady-state and Michaelis-Menten enzyme kinetics is described. The instructor uses a free version of professional-quality KinTek Explorer simulation software and student input to construct dynamic versions of three static hallmark images commonly used to introduce enzyme…

Implementing Simulation Design of Experiments and Remote Execution on a High Performance Computing Cluster

DTIC Science & Technology

2007-09-01

example, an application developed in Sun’s Netbeans [2007] integrated development environment (IDE) uses Swing class object for graphical user... Netbeans Version 5.5.1 [Computer Software]. Santa Clara, CA: Sun Microsystems. Process Modeler Version 7.0 [Computer Software]. Santa Clara, Ca

GOCE User Toolbox and Tutorial

NASA Astrophysics Data System (ADS)

Knudsen, Per; Benveniste, Jerome

2017-04-01

The GOCE User Toolbox GUT is a compilation of tools for the utilisation and analysis of GOCE Level 2 products.
GUT support applications in Geodesy, Oceanography and Solid Earth Physics. The GUT Tutorial provides information
and guidance in how to use the toolbox for a variety of applications. GUT consists of a series of advanced
computer routines that carry out the required computations. It may be used on Windows PCs, UNIX/Linux Workstations,
and Mac. The toolbox is supported by The GUT Algorithm Description and User Guide and The GUT
Install Guide. A set of a-priori data and models are made available as well. Without any doubt the development
of the GOCE user toolbox have played a major role in paving the way to successful use of the GOCE data for
oceanography. The GUT version 2.2 was released in April 2014 and beside some bug-fixes it adds the capability for the computation of Simple Bouguer Anomaly (Solid-Earth). During this fall a new GUT version 3 has been released. GUTv3 was further developed through a collaborative effort where the scientific communities participate aiming
on an implementation of remaining functionalities facilitating a wider span of research in the fields of Geodesy,
Oceanography and Solid earth studies.
Accordingly, the GUT version 3 has:
 - An attractive and easy to use Graphic User Interface (GUI) for the toolbox,
 - Enhance the toolbox with some further software functionalities such as to facilitate the use of gradients,
anisotropic diffusive filtering and computation of Bouguer and isostatic gravity anomalies.
 - An associated GUT VCM tool for analyzing the GOCE variance covariance matrices.

GOCE User Toolbox and Tutorial

NASA Astrophysics Data System (ADS)

Knudsen, Per; Benveniste, Jerome; Team Gut

2016-04-01

The GOCE User Toolbox GUT is a compilation of tools for the utilisation and analysis of GOCE Level 2 products.
GUT support applications in Geodesy, Oceanography and Solid Earth Physics. The GUT Tutorial provides information
and guidance in how to use the toolbox for a variety of applications. GUT consists of a series of advanced
computer routines that carry out the required computations. It may be used on Windows PCs, UNIX/Linux Workstations,
and Mac. The toolbox is supported by The GUT Algorithm Description and User Guide and The GUT
Install Guide. A set of a-priori data and models are made available as well. Without any doubt the development
of the GOCE user toolbox have played a major role in paving the way to successful use of the GOCE data for
oceanography. The GUT version 2.2 was released in April 2014 and beside some bug-fixes it adds the capability for the computation of Simple Bouguer Anomaly (Solid-Earth). During this fall a new GUT version 3 has been released. GUTv3 was further developed through a collaborative effort where the scientific communities participate aiming
on an implementation of remaining functionalities facilitating a wider span of research in the fields of Geodesy,
Oceanography and Solid earth studies.
Accordingly, the GUT version 3 has:
 - An attractive and easy to use Graphic User Interface (GUI) for the toolbox,
 - Enhance the toolbox with some further software functionalities such as to facilitate the use of gradients,
anisotropic diffusive filtering and computation of Bouguer and isostatic gravity anomalies.
 - An associated GUT VCM tool for analyzing the GOCE variance covariance matrices.

National Assessment of Educational Progress: 1983-84 Public-Use Data Tapes, Version 3.1. Users' Guide.

ERIC Educational Resources Information Center

Barone, John L.; And Others

This document is the users' guide for Version 3.1 of the Public-Use data tapes compiled by the National Assessment of Educational Progress (NAEP), 1983-84. The Public-Use tapes are produced to allow outside researchers access to the NAEP data. The tapes accompanying this guide contain data assessing student achievement in reading and writing at…

PR-EDB: Power Reactor Embrittlement Database - Version 3

DOE Office of Scientific and Technical Information (OSTI.GOV)

Wang, Jy-An John; Subramani, Ranjit

2008-03-01

The aging and degradation of light-water reactor pressure vessels is of particular concern because of their relevance to plant integrity and the magnitude of the expected irradiation embrittlement. The radiation embrittlement of reactor pressure vessel materials depends on many factors, such as neutron fluence, flux, and energy spectrum, irradiation temperature, and preirradiation material history and chemical compositions. These factors must be considered to reliably predict pressure vessel embrittlement and to ensure the safe operation of the reactor. Large amounts of data from surveillance capsules are needed to develop a generally applicable damage prediction model that can be used for industrymore » standards and regulatory guides. Furthermore, the investigations of regulatory issues such as vessel integrity over plant life, vessel failure, and sufficiency of current codes, Standard Review Plans (SRPs), and Guides for license renewal can be greatly expedited by the use of a well-designed computerized database. The Power Reactor Embrittlement Database (PR-EDB) is such a comprehensive collection of data for U.S. designed commercial nuclear reactors. The current version of the PR-EDB lists the test results of 104 heat-affected-zone (HAZ) materials, 115 weld materials, and 141 base materials, including 103 plates, 35 forgings, and 3 correlation monitor materials that were irradiated in 321 capsules from 106 commercial power reactors. The data files are given in dBASE format and can be accessed with any personal computer using the Windows operating system. "User-friendly" utility programs have been written to investigate radiation embrittlement using this database. Utility programs allow the user to retrieve, select and manipulate specific data, display data to the screen or printer, and fit and plot Charpy impact data. The PR-EDB Version 3.0 upgrades Version 2.0. The package was developed based on the Microsoft .NET framework technology and uses Microsoft Access for backend data storage, and Microsoft Excel for plotting graphs. This software package is compatible with Windows (98 or higher) and has been built with a highly versatile user interface. PR-EDB Version 3.0 also contains an "Evaluated Residual File" utility for generating the evaluated processed files used for radiation embrittlement study.« less

NCEP BUFRLIB Software User Guide

Science.gov Websites

Integration Branch > Decoders > BUFRLIB BUFRLIB Software User Guide This document set describes how to use the NCEP BUFRLIB software to encode or decode BUFR messages. It is not intended to be a primer on background knowledge of the basic concepts of BUFR and will focus solely on how to use the BUFRLIB software

JavaGenes Molecular Evolution

NASA Technical Reports Server (NTRS)

Lohn, Jason; Smith, David; Frank, Jeremy; Globus, Al; Crawford, James

2007-01-01

JavaGenes is a general-purpose, evolutionary software system written in Java. It implements several versions of a genetic algorithm, simulated annealing, stochastic hill climbing, and other search techniques. This software has been used to evolve molecules, atomic force field parameters, digital circuits, Earth Observing Satellite schedules, and antennas. This version differs from version 0.7.28 in that it includes the molecule evolution code and other improvements. Except for the antenna code, JaveGenes is available for NASA Open Source distribution.

Approaches in highly parameterized inversion—PEST++ Version 3, a Parameter ESTimation and uncertainty analysis software suite optimized for large environmental models

USGS Publications Warehouse

Welter, David E.; White, Jeremy T.; Hunt, Randall J.; Doherty, John E.

2015-09-18

The PEST++ Version 3 software suite can be compiled for Microsoft Windows®4 and Linux®5 operating systems; the source code is available in a Microsoft Visual Studio®6 2013 solution; Linux Makefiles are also provided. PEST++ Version 3 continues to build a foundation for an open-source framework capable of producing robust and efficient parameter estimation tools for large environmental models.

The 1993-94 Educational Software Preview Guide.

ERIC Educational Resources Information Center

Best, Anita, Ed.; Mathis, Judi, Ed.

This guide lists favorably reviewed, commercially available, microcomputer software for instructional use in preschool through grade 12. The guide is organized by the following curriculum areas: art; business education; computers; health; instructional tools, including authoring systems, computer assisted drafting (CAD), classroom management,…

UTM TCL 2.0 Software Version Description (SVD) Document

NASA Technical Reports Server (NTRS)

Mcguirk, Patrick

2017-01-01

This is the Unmanned Aircraft Systems (UAS) Traffic Management (UTM) Technical Capability Level(TCL) 2.0 Software Version Description (SVD) document. This UTM TCL 2.0 SVD describes the following four topics: 1. Software Release Contents: A listing of the files comprising this release 2. Installation Instructions: How to install the release and get it running 3. Changes Since Previous Release: General updates since the previous UTM release 4. Known Issues: Known issues and limitations in this release

Computer Simulation Modeling: A Method for Predicting the Utilities of Alternative Computer-Aided Treat Evaluation Algorithms

DTIC Science & Technology

1990-09-01

1988). Current versions of the ADATS have CATE systems insLzlled, but the software is still under development by the radar manufacturer, Contraves ...Italiana, a subcontractor to Martin Marietta (USA). Contraves Italiana will deliver the final version of the software to Martin Marietta in 1991. Until then

A Review of DIMPACK Version 1.0: Conditional Covariance-Based Test Dimensionality Analysis Package

ERIC Educational Resources Information Center

Deng, Nina; Han, Kyung T.; Hambleton, Ronald K.

2013-01-01

DIMPACK Version 1.0 for assessing test dimensionality based on a nonparametric conditional covariance approach is reviewed. This software was originally distributed by Assessment Systems Corporation and now can be freely accessed online. The software consists of Windows-based interfaces of three components: DIMTEST, DETECT, and CCPROX/HAC, which…

New Cerec software version 4.3 for Omnicam and Bluecam.

PubMed

Fritzsche, G; Schenk, O

2014-01-01

The introduction of the Cerec Omnicam acquisition unit in September 2012 presented Sirona with a challenge: con- figuring the existing software version 4 for both the exist- ing Bluecam, which uses still images, and the video-based Omnicam. Sirona has succeeded in making all the features introduced in version 4.2 (such as the virtual articulator or implant-supported single-tooth restorations, both monolithic and two-part designs) work with both camera types, without compromising the uniform, homogeneous look and feel of the software. The virtual articulator (Figs 1a to 1c) now has even more individual configuration options and allows the setting of almost all angles derived from the individual transfer bow based on precalculated average values. The new software version 4.3, presented in July 2014, fixes some minor bugs, such as the time-consuming "empty grinding" after necessary water changes during the grinding process, but also includes many features that noticeably ease the workflow. For example, the important scanning precision in the region of the anterior incisal edges has been improved, which makes the scanning process more reliable, faster, and far more comfortable.

Executive Guide to Software Maintenance. Reports on Computer Science and Technology.

ERIC Educational Resources Information Center

Osborne, Wilma M.

This guide is designed for federal executives and managers who have a responsibility for the planning and management of software projects and for federal staff members who are affected by, or involved in, making software changes, and who need to be aware of steps that can reduce both the difficulty and cost of software maintenance. Organized in a…

A second generation experiment in fault-tolerant software

NASA Technical Reports Server (NTRS)

Knight, J. C.

1986-01-01

Information was collected on the efficacy of fault-tolerant software by conducting two large-scale controlled experiments. In the first, an empirical study of multi-version software (MVS) was conducted. The second experiment is an empirical evaluation of self testing as a method of error detection (STED). The purpose ot the MVS experiment was to obtain empirical measurement of the performance of multi-version systems. Twenty versions of a program were prepared at four different sites under reasonably realistic development conditions from the same specifications. The purpose of the STED experiment was to obtain empirical measurements of the performance of assertions in error detection. Eight versions of a program were modified to include assertions at two different sites under controlled conditions. The overall structure of the testing environment for the MVS experiment and its status are described. Work to date in the STED experiment is also presented.

Selective Guide to Literature on Software Review Sources. Engineering Literature Guides, Number 8.

ERIC Educational Resources Information Center

Bean, Margaret H., Ed.

This selective literature guide serves as a directory to software evaluation sources for all sizes of microcomputers. Information is provided on review sources and guides which deal with a variety of applications such as library, engineering, school, and business as well as a variety of systems, including DOS and CP/M. This document is intended to…

Sequence Alignment to Predict Across Species Susceptibility (SeqAPASS) Version 3.0 User Guide

EPA Science Inventory

User Guide to describe the complete functionality of the Sequence Alignment to Predict Across Species Susceptibility (SeqAPASS) Version 3.0 online tool. The US Environmental Protection Agency Sequence Alignment to Predict Across Species Susceptibility tool (SeqAPASS; https://seqa...

The Supertree Toolkit 2: a new and improved software package with a Graphical User Interface for supertree construction

PubMed Central

2014-01-01

Abstract Building large supertrees involves the collection, storage, and processing of thousands of individual phylogenies to create large phylogenies with thousands to tens of thousands of taxa. Such large phylogenies are useful for macroevolutionary studies, comparative biology and in conservation and biodiversity. No easy to use and fully integrated software package currently exists to carry out this task. Here, we present a new Python-based software package that uses well defined XML schema to manage both data and metadata. It builds on previous versions by 1) including new processing steps, such as Safe Taxonomic Reduction, 2) using a user-friendly GUI that guides the user to complete at least the minimum information required and includes context-sensitive documentation, and 3) a revised storage format that integrates both tree- and meta-data into a single file. These data can then be manipulated according to a well-defined, but flexible, processing pipeline using either the GUI or a command-line based tool. Processing steps include standardising names, deleting or replacing taxa, ensuring adequate taxonomic overlap, ensuring data independence, and safe taxonomic reduction. This software has been successfully used to store and process data consisting of over 1000 trees ready for analyses using standard supertree methods. This software makes large supertree creation a much easier task and provides far greater flexibility for further work. PMID:24891820

Modeling and Grid Generation of Iced Airfoils

NASA Technical Reports Server (NTRS)

Vickerman, Mary B.; Baez, Marivell; Braun, Donald C.; Hackenberg, Anthony W.; Pennline, James A.; Schilling, Herbert W.

2007-01-01

SmaggIce Version 2.0 is a software toolkit for geometric modeling and grid generation for two-dimensional, singleand multi-element, clean and iced airfoils. A previous version of SmaggIce was described in Preparing and Analyzing Iced Airfoils, NASA Tech Briefs, Vol. 28, No. 8 (August 2004), page 32. To recapitulate: Ice shapes make it difficult to generate quality grids around airfoils, yet these grids are essential for predicting ice-induced complex flow. This software efficiently creates high-quality structured grids with tools that are uniquely tailored for various ice shapes. SmaggIce Version 2.0 significantly enhances the previous version primarily by adding the capability to generate grids for multi-element airfoils. This version of the software is an important step in streamlining the aeronautical analysis of ice airfoils using computational fluid dynamics (CFD) tools. The user may prepare the ice shape, define the flow domain, decompose it into blocks, generate grids, modify/divide/merge blocks, and control grid density and smoothness. All these steps may be performed efficiently even for the difficult glaze and rime ice shapes. Providing the means to generate highly controlled grids near rough ice, the software includes the creation of a wrap-around block (called the "viscous sublayer block"), which is a thin, C-type block around the wake line and iced airfoil. For multi-element airfoils, the software makes use of grids that wrap around and fill in the areas between the viscous sub-layer blocks for all elements that make up the airfoil. A scripting feature records the history of interactive steps, which can be edited and replayed later to produce other grids. Using this version of SmaggIce, ice shape handling and grid generation can become a practical engineering process, rather than a laborious research effort.

User's Guide for a Modular Flutter Analysis Software System (Fast Version 1.0)

NASA Technical Reports Server (NTRS)

Desmarais, R. N.; Bennett, R. M.

1978-01-01

The use and operation of a group of computer programs to perform a flutter analysis of a single planar wing are described. This system of programs is called FAST for Flutter Analysis System, and consists of five programs. Each program performs certain portions of a flutter analysis and can be run sequentially as a job step or individually. FAST uses natural vibration modes as input data and performs a conventional V-g type of solution. The unsteady aerodynamics programs in FAST are based on the subsonic kernel function lifting-surface theory although other aerodynamic programs can be used. Application of the programs is illustrated by a sample case of a complete flutter calculation that exercises each program.

DSN Array Simulator

NASA Technical Reports Server (NTRS)

Tikidjian, Raffi; Mackey, Ryan

2008-01-01

The DSN Array Simulator (wherein 'DSN' signifies NASA's Deep Space Network) is an updated version of software previously denoted the DSN Receive Array Technology Assessment Simulation. This software (see figure) is used for computational modeling of a proposed DSN facility comprising user-defined arrays of antennas and transmitting and receiving equipment for microwave communication with spacecraft on interplanetary missions. The simulation includes variations in spacecraft tracked and communication demand changes for up to several decades of future operation. Such modeling is performed to estimate facility performance, evaluate requirements that govern facility design, and evaluate proposed improvements in hardware and/or software. The updated version of this software affords enhanced capability for characterizing facility performance against user-defined mission sets. The software includes a Monte Carlo simulation component that enables rapid generation of key mission-set metrics (e.g., numbers of links, data rates, and date volumes), and statistical distributions thereof as functions of time. The updated version also offers expanded capability for mixed-asset network modeling--for example, for running scenarios that involve user-definable mixtures of antennas having different diameters (in contradistinction to a fixed number of antennas having the same fixed diameter). The improved version also affords greater simulation fidelity, sufficient for validation by comparison with actual DSN operations and analytically predictable performance metrics.

Software Management for the NOνAExperiment

NASA Astrophysics Data System (ADS)

Davies, G. S.; Davies, J. P.; C Group; Rebel, B.; Sachdev, K.; Zirnstein, J.

2015-12-01

The NOvAsoftware (NOνASoft) is written in C++, and built on the Fermilab Computing Division's art framework that uses ROOT analysis software. NOνASoftmakes use of more than 50 external software packages, is developed by more than 50 developers and is used by more than 100 physicists from over 30 universities and laboratories in 3 continents. The software builds are handled by Fermilab's custom version of Software Release Tools (SRT), a UNIX based software management system for large, collaborative projects that is used by several experiments at Fermilab. The system provides software version control with SVN configured in a client-server mode and is based on the code originally developed by the BaBar collaboration. In this paper, we present efforts towards distributing the NOvA software via the CernVM File System distributed file system. We will also describe our recent work to use a CMake build system and Jenkins, the open source continuous integration system, for NOνASoft.

Upgrading Custom Simulink Library Components for Use in Newer Versions of Matlab

NASA Technical Reports Server (NTRS)

Stewart, Camiren L.

2014-01-01

The Spaceport Command and Control System (SCCS) at Kennedy Space Center (KSC) is a control system for monitoring and launching manned launch vehicles. Simulations of ground support equipment (GSE) and the launch vehicle systems are required throughout the life cycle of SCCS to test software, hardware, and procedures to train the launch team. The simulations of the GSE at the launch site in conjunction with off-line processing locations are developed using Simulink, a piece of Commercial Off-The-Shelf (COTS) software. The simulations that are built are then converted into code and ran in a simulation engine called Trick, a Government off-the-shelf (GOTS) piece of software developed by NASA. In the world of hardware and software, it is not uncommon to see the products that are utilized be upgraded and patched or eventually fade away into an obsolete status. In the case of SCCS simulation software, Matlab, a MathWorks product, has released a number of stable versions of Simulink since the deployment of the software on the Development Work Stations in the Linux environment (DWLs). The upgraded versions of Simulink has introduced a number of new tools and resources that, if utilized fully and correctly, will save time and resources during the overall development of the GSE simulation and its correlating documentation. Unfortunately, simply importing the already built simulations into the new Matlab environment will not suffice as it will produce results that may not be expected as they were in the version that is currently being utilized. Thus, an upgrade execution plan was developed and executed to fully upgrade the simulation environment to one of the latest versions of Matlab.

Importance of software version for measurement of arterial stiffness: Arteriograph as an example.

PubMed

Ring, Margareta; Eriksson, Maria J; Nyberg, Gunnar; Caidahl, Kenneth

2018-01-01

Current guidelines recommend the measurement of arterial stiffness in terms of aortic pulse wave velocity (PWV) as an important cardio-vascular risk marker. Both aortic PWV and the aortic augmentation index (AIxao) can be measured using different techniques, e.g., the Arteriograph and SphygmoCor. A new version of the software for the Arteriograph (v. 3.0.0.1, TensioMed, Budapest, Hungary; Arteriograph II) is now available. We wanted to determine whether this improved software differs from the previous version (Arteriograph v. 1.9.9.12; Arteriograph I). We compared the estimated aortic PWV (ePWVao) and AIxao measured with both versions of Arteriograph software and analysed the agreement of these values with those measured by SphygmoCor (v. 7.01, AtCor Medical, Sydney, Australia). Eighty-seven subjects without known cardio-vascular disease (23 men and 64 women) aged 54.2 ± 8.7 years (mean ± standard deviation; range 33-68 years) were included in the study. Estimated PWVao and AIxao were measured by both Arteriograph and SphygmoCor. We compared Arteriograph I and Arteriograph II with each other and with SphygmoCor. Estimated PWVao measured by Arteriograph II was lower than that measured by Arteriograph I, while the AIxao was higher. Divergence in ePWVao values was especially noted above 9 m/s. Estimated PWVao measured by Arteriograph II (7.2 m/s, 6.6-8.0 [median, 25th-75th percentile]) did not differ from that measured by SphygmoCor (7.1 m/s, 6.7-7.9 [median, 25th-75th percentile]). However, the AIao measured by Arteriograph II was significantly higher (P < 0.001). Regularly upgraded software versions resulting from continuous technical development are needed for quality improvement of methods. However, the changes in software, even if the basic patented operational algorithm has not changed, may influence the measured values as shown in the present study. Therefore, attention should be paid to the software version of the method used when comparing arterial stiffness results in clinical settings or when performing scientific studies.

Software reliability experiments data analysis and investigation

NASA Technical Reports Server (NTRS)

Walker, J. Leslie; Caglayan, Alper K.

1991-01-01

The objectives are to investigate the fundamental reasons which cause independently developed software programs to fail dependently, and to examine fault tolerant software structures which maximize reliability gain in the presence of such dependent failure behavior. The authors used 20 redundant programs from a software reliability experiment to analyze the software errors causing coincident failures, to compare the reliability of N-version and recovery block structures composed of these programs, and to examine the impact of diversity on software reliability using subpopulations of these programs. The results indicate that both conceptually related and unrelated errors can cause coincident failures and that recovery block structures offer more reliability gain than N-version structures if acceptance checks that fail independently from the software components are available. The authors present a theory of general program checkers that have potential application for acceptance tests.

Trade Space Specification Tool (TSST) for Rapid Mission Architecture (Version 1.2)

NASA Technical Reports Server (NTRS)

Wang, Yeou-Fang; Schrock, Mitchell; Borden, Chester S.; Moeller, Robert C.

2013-01-01

Trade Space Specification Tool (TSST) is designed to capture quickly ideas in the early spacecraft and mission architecture design and categorize them into trade space dimensions and options for later analysis. It is implemented as an Eclipse RCP Application, which can be run as a standalone program. Users rapidly create concept items with single clicks on a graphical canvas, and can organize and create linkages between the ideas using drag-and-drop actions within the same graphical view. Various views such as a trade view, rules view, and architecture view are provided to help users to visualize the trade space. This software can identify, explore, and assess aspects of the mission trade space, as well as capture and organize linkages/dependencies between trade space components. The tool supports a user-in-the-loop preliminary logical examination and filtering of trade space options to help identify which paths in the trade space are feasible (and preferred) and what analyses need to be done later with executable models. This tool provides multiple user views of the trade space to guide the analyst/team to facilitate interpretation and communication of the trade space components and linkages, identify gaps in combining and selecting trade space options, and guide user decision-making for which combinations of architectural options should be pursued for further evaluation. This software provides an environment to capture mission trade space elements rapidly and assist users for their architecture analysis. This is primarily focused on mission and spacecraft architecture design, rather than general-purpose design application. In addition, it provides more flexibility to create concepts and organize the ideas. The software is developed as an Eclipse plug-in and potentially can be integrated with other Eclipse-based tools.

IPMP Global Fit - A one-step direct data analysis tool for predictive microbiology.

PubMed

Huang, Lihan

2017-12-04

The objective of this work is to develop and validate a unified optimization algorithm for performing one-step global regression analysis of isothermal growth and survival curves for determination of kinetic parameters in predictive microbiology. The algorithm is incorporated with user-friendly graphical interfaces (GUIs) to develop a data analysis tool, the USDA IPMP-Global Fit. The GUIs are designed to guide the users to easily navigate through the data analysis process and properly select the initial parameters for different combinations of mathematical models. The software is developed for one-step kinetic analysis to directly construct tertiary models by minimizing the global error between the experimental observations and mathematical models. The current version of the software is specifically designed for constructing tertiary models with time and temperature as the independent model parameters in the package. The software is tested with a total of 9 different combinations of primary and secondary models for growth and survival of various microorganisms. The results of data analysis show that this software provides accurate estimates of kinetic parameters. In addition, it can be used to improve the experimental design and data collection for more accurate estimation of kinetic parameters. IPMP-Global Fit can be used in combination with the regular USDA-IPMP for solving the inverse problems and developing tertiary models in predictive microbiology. Published by Elsevier B.V.

View_SPECPR: Software for Plotting Spectra (Installation Manual and User's Guide, Version 1.2)

USGS Publications Warehouse

Kokaly, Raymond F.

2008-01-01

This document describes procedures for installing and using the 'View_SPECPR' software system to plot spectra stored in SPECPR (SPECtrum Processing Routines) files. The View_SPECPR software is comprised of programs written in IDL (Interactive Data Language) that run within the ENVI (ENvironment for Visualizing Images) image processing system. SPECPR files are used by earth-remote-sensing scientists and planetary scientists for storing spectra collected by laboratory, field, and remote sensing instruments. A widely distributed SPECPR file is the U.S. Geological Survey (USGS) spectral library that contains thousands of spectra of minerals, vegetation, and man-made materials (Clark and others, 2007). SPECPR files contain reflectance data and associated wavelength and spectral resolution data, as well as meta-data on the time and date of collection and spectrometer settings. Furthermore, the SPECPR file automatically tracks changes to data records through its 'history' fields. For more details on the format and content of SPECPR files, see Clark (1993). For more details on ENVI, see ITT (2008). This program has been updated using an ENVI 4.5/IDL7.0 full license operating on a Windows XP operating system and requires the installation of the iTools components of IDL7.0; however, this program should work with full licenses on UNIX/LINUX systems. This software has not been tested with ENVI licenses on Windows Vista or Apple Operating Systems.

Teacher's Guide to SERAPHIM Software I. Chemistry: Experimental Foundations.

ERIC Educational Resources Information Center

Bogner, Donna J.

Designed to assist chemistry teachers in selecting appropriate software programs, this publication is the first in a series of six teacher's guides from Project SERAPHIM, a program sponsored by the National Science Foundation. This guide is keyed to the chapters of the text "Chemistry: Experimental Foundations." Program suggestions are…

Teacher's Guide to SERAPHIM Software II. Chemical Principles.

ERIC Educational Resources Information Center

Bogner, Donna J.

Designed to assist chemistry teachers in selecting appropriate software programs, this publication is the second in a series of six teacher's guides from Project SERAPHIM, a program sponsored by the National Science Foundation. This guide is keyed to the chapters of the text "Chemical Principles." Program suggestions are arranged in the…

Microcomputer Software Technician Curriculum.

ERIC Educational Resources Information Center

EASTCONN Regional Educational Services Center, North Windham, CT.

This curriculum guide, developed for high schools in Connecticut, outlines a 4-year program for training microcomputer software technicians. Following a list of nine general objectives of the program, the guide provides a list of competencies that students are expected to develop in each of the courses of the 4-year program. The guide then…

Nuclear Engine System Simulation (NESS). Version 2.0: Program user's guide

NASA Technical Reports Server (NTRS)

Pelaccio, Dennis G.; Scheil, Christine M.; Petrosky, Lyman

1993-01-01

This Program User's Guide discusses the Nuclear Thermal Propulsion (NTP) engine system design features and capabilities modeled in the Nuclear Engine System Simulation (NESS): Version 2.0 program (referred to as NESS throughout the remainder of this document), as well as its operation. NESS was upgraded to include many new modeling capabilities not available in the original version delivered to NASA LeRC in Dec. 1991, NESS's new features include the following: (1) an improved input format; (2) an advanced solid-core NERVA-type reactor system model (ENABLER 2); (3) a bleed-cycle engine system option; (4) an axial-turbopump design option; (5) an automated pump-out turbopump assembly sizing option; (6) an off-design gas generator engine cycle design option; (7) updated hydrogen properties; (8) an improved output format; and (9) personal computer operation capability. Sample design cases are presented in the user's guide that demonstrate many of the new features associated with this upgraded version of NESS, as well as design modeling features associated with the original version of NESS.

Guide for Regional Integrated Assessments: Handbook of Methods and Procedures, Version 5.1. Appendix 1

NASA Technical Reports Server (NTRS)

Rosenzweig, Cynthia E.; Jones, James W.; Hatfield, Jerry; Antle, John; Ruane, Alex; Boote, Ken; Thorburn, Peter; Valdivia, Roberto; Porter, Cheryl; Janssen, Sander;

Autogen Version 2.0

NASA Technical Reports Server (NTRS)

Gladden, Roy

2007-01-01

Version 2.0 of the autogen software has been released. "Autogen" (automated sequence generation) signifies both a process and software used to implement the process of automated generation of sequences of commands in a standard format for uplink to spacecraft. Autogen requires fewer workers than are needed for older manual sequence-generation processes and reduces sequence-generation times from weeks to minutes.

Markov chains for testing redundant software

NASA Technical Reports Server (NTRS)

White, Allan L.; Sjogren, Jon A.

1988-01-01

A preliminary design for a validation experiment has been developed that addresses several problems unique to assuring the extremely high quality of multiple-version programs in process-control software. The procedure uses Markov chains to model the error states of the multiple version programs. The programs are observed during simulated process-control testing, and estimates are obtained for the transition probabilities between the states of the Markov chain. The experimental Markov chain model is then expanded into a reliability model that takes into account the inertia of the system being controlled. The reliability of the multiple version software is computed from this reliability model at a given confidence level using confidence intervals obtained for the transition probabilities during the experiment. An example demonstrating the method is provided.

Building a Snow Data Management System using Open Source Software (and IDL)

NASA Astrophysics Data System (ADS)

Goodale, C. E.; Mattmann, C. A.; Ramirez, P.; Hart, A. F.; Painter, T.; Zimdars, P. A.; Bryant, A.; Brodzik, M.; Skiles, M.; Seidel, F. C.; Rittger, K. E.

2012-12-01

At NASA's Jet Propulsion Laboratory free and open source software is used everyday to support a wide range of projects, from planetary to climate to research and development. In this abstract I will discuss the key role that open source software has played in building a robust science data processing pipeline for snow hydrology research, and how the system is also able to leverage programs written in IDL, making JPL's Snow Data System a hybrid of open source and proprietary software. Main Points: - The Design of the Snow Data System (illustrate how the collection of sub-systems are combined to create a complete data processing pipeline) - Discuss the Challenges of moving from a single algorithm on a laptop, to running 100's of parallel algorithms on a cluster of servers (lesson's learned) - Code changes - Software license related challenges - Storage Requirements - System Evolution (from data archiving, to data processing, to data on a map, to near-real-time products and maps) - Road map for the next 6 months (including how easily we re-used the snowDS code base to support the Airborne Snow Observatory Mission) Software in Use and their Software Licenses: IDL - Used for pre and post processing of data. Licensed under a proprietary software license held by Excelis. Apache OODT - Used for data management and workflow processing. Licensed under the Apache License Version 2. GDAL - Geospatial Data processing library used for data re-projection currently. Licensed under the X/MIT license. GeoServer - WMS Server. Licensed under the General Public License Version 2.0 Leaflet.js - Javascript web mapping library. Licensed under the Berkeley Software Distribution License. Python - Glue code and miscellaneous data processing support. Licensed under the Python Software Foundation License. Perl - Script wrapper for running the SCAG algorithm. Licensed under the General Public License Version 3. PHP - Front-end web application programming. Licensed under the PHP License Version 3.01

Numerical arc segmentation algorithm for a radio conference-NASARC (version 2.0) technical manual

NASA Technical Reports Server (NTRS)

Whyte, Wayne A., Jr.; Heyward, Ann O.; Ponchak, Denise S.; Spence, Rodney L.; Zuzek, John E.

1987-01-01

The information contained in the NASARC (Version 2.0) Technical Manual (NASA TM-100160) and NASARC (Version 2.0) User's Manual (NASA TM-100161) relates to the state of NASARC software development through October 16, 1987. The Technical Manual describes the Numerical Arc Segmentation Algorithm for a Radio Conference (NASARC) concept and the algorithms used to implement the concept. The User's Manual provides information on computer system considerations, installation instructions, description of input files, and program operating instructions. Significant revisions have been incorporated in the Version 2.0 software. These revisions have enhanced the modeling capabilities of the NASARC procedure while greatly reducing the computer run time and memory requirements. Array dimensions within the software have been structured to fit within the currently available 6-megabyte memory capacity of the International Frequency Registration Board (IFRB) computer facility. A piecewise approach to predetermined arc generation in NASARC (Version 2.0) allows worldwide scenarios to be accommodated within these memory constraints while at the same time effecting an overall reduction in computer run time.

Real-time fluoroscopic needle guidance in the interventional radiology suite using navigational software for percutaneous bone biopsies in children.

PubMed

Shellikeri, Sphoorti; Setser, Randolph M; Hwang, Tiffany J; Srinivasan, Abhay; Krishnamurthy, Ganesh; Vatsky, Seth; Girard, Erin; Zhu, Xiaowei; Keller, Marc S; Cahill, Anne Marie

2017-07-01

Navigational software provides real-time fluoroscopic needle guidance for percutaneous procedures in the Interventional Radiology (IR) suite. We describe our experience with navigational software for pediatric percutaneous bone biopsies in the IR suite and compare technical success, diagnostic accuracy, radiation dose and procedure time with that of CT-guided biopsies. Pediatric bone biopsies performed using navigational software (Syngo iGuide, Siemens Healthcare) from 2011 to 2016 were prospectively included and anatomically matched CT-guided bone biopsies from 2008 to 2016 were retrospectively reviewed with institutional review board approval. C-arm CT protocols used for navigational software-assisted cases included institution-developed low-dose (0.1/0.17 μGy/projection), regular-dose (0.36 μGy/projection), or a combination of low-dose/regular-dose protocols. Estimated effective radiation dose and procedure times were compared between software-assisted and CT-guided biopsies. Twenty-six patients (15 male; mean age: 10 years) underwent software-assisted biopsies (15 pelvic, 7 lumbar and 4 lower extremity) and 33 patients (13 male; mean age: 9 years) underwent CT-guided biopsies (22 pelvic, 7 lumbar and 4 lower extremity). Both modality biopsies resulted in a 100% technical success rate. Twenty-five of 26 (96%) software-assisted and 29/33 (88%) CT-guided biopsies were diagnostic. Overall, the effective radiation dose was significantly lower in software-assisted than CT-guided cases (3.0±3.4 vs. 6.6±7.7 mSv, P=0.02). The effective dose difference was most dramatic in software-assisted cases using low-dose C-arm CT (1.2±1.8 vs. 6.6±7.7 mSv, P=0.001) or combined low-dose/regular-dose C-arm CT (1.9±2.4 vs. 6.6±7.7 mSv, P=0.04), whereas effective dose was comparable in software-assisted cases using regular-dose C-arm CT (6.0±3.5 vs. 6.6±7.7 mSv, P=0.7). Mean procedure time was significantly lower for software-assisted cases (91±54 vs. 141±68 min, P=0.005). In our experience, navigational software technology in the IR suite is a promising alternative to CT guidance for pediatric bone biopsies providing comparable technical success and diagnostic accuracy with lower radiation dose and procedure time, in addition to providing real-time fluoroscopic needle guidance.

A computationally efficient software application for calculating vibration from underground railways

NASA Astrophysics Data System (ADS)

Hussein, M. F. M.; Hunt, H. E. M.

2009-08-01

The PiP model is a software application with a user-friendly interface for calculating vibration from underground railways. This paper reports about the software with a focus on its latest version and the plans for future developments. The software calculates the Power Spectral Density of vibration due to a moving train on floating-slab track with track irregularity described by typical values of spectra for tracks with good, average and bad conditions. The latest version accounts for a tunnel embedded in a half space by employing a toolbox developed at K.U. Leuven which calculates Green's functions for a multi-layered half-space.

Ground-Based Correction of Remote-Sensing Spectral Imagery

NASA Technical Reports Server (NTRS)

Alder-Golden, Steven M.; Rochford, Peter; Matthew, Michael; Berk, Alexander

2007-01-01

Software has been developed for an improved method of correcting for the atmospheric optical effects (primarily, effects of aerosols and water vapor) in spectral images of the surface of the Earth acquired by airborne and spaceborne remote-sensing instruments. In this method, the variables needed for the corrections are extracted from the readings of a radiometer located on the ground in the vicinity of the scene of interest. The software includes algorithms that analyze measurement data acquired from a shadow-band radiometer. These algorithms are based on a prior radiation transport software model, called MODTRAN, that has been developed through several versions up to what are now known as MODTRAN4 and MODTRAN5 . These components have been integrated with a user-friendly Interactive Data Language (IDL) front end and an advanced version of MODTRAN4. Software tools for handling general data formats, performing a Langley-type calibration, and generating an output file of retrieved atmospheric parameters for use in another atmospheric-correction computer program known as FLAASH have also been incorporated into the present soft-ware. Concomitantly with the soft-ware described thus far, there has been developed a version of FLAASH that utilizes the retrieved atmospheric parameters to process spectral image data.

The Profiles in Practice School Reporting Software.

ERIC Educational Resources Information Center

Griffin, Patrick

"The Profiles in Practice: School Reporting Software" provides a framework for reports on different aspects of performance in an assessment program. This booklet is the installation guide and user manual for the Profiles in Practice software, which is included as a CD-ROM. The chapters of the guide are: (1) "Installation"; (2) "Starting the…

A Guide to Street Tree Inventory Software

Treesearch

Gene A. Olig; Robert W. Miller

1997-01-01

The purpose of this publication is to serve as a reference and guide for urban forestry professionals in the selection of a street tree inventory software program. The programs described include only those that are commercially available. The increasing demand for street tree inventory software follows a trend towards a more computerized society and the increasing...

Teacher's Guide to SERAPHIM Software III. Modern Chemistry.

ERIC Educational Resources Information Center

Bogner, Donna J.

Designed to assist chemistry teachers in selecting appropriate software programs, this publication is the third in a series of six teacher's guides from Project SERAPHIM, a program sponsored by the National Science Foundation. This guide is keyed to the chapters of the text "Modern Chemistry." Program suggestions are arranged in the same…

Teacher's Guide to SERAPHIM Software IV Chemistry: A Modern Course.

ERIC Educational Resources Information Center

Bogner, Donna J.

Designed to assist chemistry teachers in selecting appropriate software programs, this publication is the fourth in a series of six teacher's guides from Project SERAPHIM, a program sponsored by the National Science Foundation. This guide is keyed to the chapters of the text "Chemistry: A Modern Course." Program suggestions are arranged…

Teacher's Guide to SERAPHIM Software VI. Chemistry: The Study of Matter.

ERIC Educational Resources Information Center

Bogner, Donna J.

Designed to assist chemistry teachers in selecting appropriate software programs, this publication is the sixth in a series of six teacher's guides from Project SERAPHIM, a program sponsored by the National Science Foundation. This guide is keyed to the chapters of the text "Chemistry: The Study of Matter." Program suggestions are…

Teacher's Guide to SERAPHIM Software V. Chemistry: The Central Science.

ERIC Educational Resources Information Center

Bogner, Donna J.

Designed to assist chemistry teachers in selecting appropriate software programs, this publication is the fifth in a series of six teacher's guides from Project SERAPHIM, a program sponsored by the National Science Foundation. This guide is keyed to the chapters of the text "Chemistry: The Central Science." Program suggestions are…

U.S. Geological Survey groundwater toolbox, a graphical and mapping interface for analysis of hydrologic data (version 1.0): user guide for estimation of base flow, runoff, and groundwater recharge from streamflow data

USGS Publications Warehouse

Barlow, Paul M.; Cunningham, William L.; Zhai, Tong; Gray, Mark

2015-01-01

This report is a user guide for the streamflow-hydrograph analysis methods provided with version 1.0 of the U.S. Geological Survey (USGS) Groundwater Toolbox computer program. These include six hydrograph-separation methods to determine the groundwater-discharge (base-flow) and surface-runoff components of streamflow—the Base-Flow Index (BFI; Standard and Modified), HYSEP (Fixed Interval, Sliding Interval, and Local Minimum), and PART methods—and the RORA recession-curve displacement method and associated RECESS program to estimate groundwater recharge from streamflow data. The Groundwater Toolbox is a customized interface built on the nonproprietary, open source MapWindow geographic information system software. The program provides graphing, mapping, and analysis capabilities in a Microsoft Windows computing environment. In addition to the four hydrograph-analysis methods, the Groundwater Toolbox allows for the retrieval of hydrologic time-series data (streamflow, groundwater levels, and precipitation) from the USGS National Water Information System, downloading of a suite of preprocessed geographic information system coverages and meteorological data from the National Oceanic and Atmospheric Administration National Climatic Data Center, and analysis of data with several preprocessing and postprocessing utilities. With its data retrieval and analysis tools, the Groundwater Toolbox provides methods to estimate many of the components of the water budget for a hydrologic basin, including precipitation; streamflow; base flow; runoff; groundwater recharge; and total, groundwater, and near-surface evapotranspiration.

USER'S GUIDE TO THE PERSONAL COMPUTER VERSION OF THE BIOGENIC EMISSIONS INVENTORY SYSTEM (PC-BEIS2)

EPA Science Inventory

The document is a user's guide for an updated Personal Computer version of the Biogenic Emissions Inventory System (PC-BEIS2), allowing users to estimate hourly emissions of biogenic volatile organic compounds (BVOCs) and soil nitrogen oxide emissions for any county in the contig...

Web-Based Interactive Electronic Technical Manual (IETM) Common User Interface Style Guide, Version 2.0

DTIC Science & Technology

2003-07-01

Technical Report WEB-BASED INTERACTIVE ELECTRONIC TECHNICAL MANUAL (IETM) COMMON USER INTERFACE STYLE GUIDE Version 2.0 – July 2003 by L. John Junod ...ACKNOWLEDGEMENTS The principal authors of this document were: John Junod – NSWC, Carderock Division, Phil Deuell – AMSEC LLC, Kathleen Moore

CSMP Mathematics for Kindergarten, Teacher's Guide [and] Worksheets. Final Experimental Version.

ERIC Educational Resources Information Center

Vandeputte, Christiane

This guide represents the final experimental version of an extended pilot project which was conducted in the United States between 1973 and 1976. The manner of presentation and the pedagogical ideas and tools are based on the works of Georges and Frederique Papy. They are recognized as having introduced colored arrow drawings…

Contributions to the revision of the 'Guide to the expression of uncertainty in measurement'

NASA Astrophysics Data System (ADS)

Kyriazis, G. A.

2015-01-01

Some inconsistencies of the current version of the 'Guide to the expression of uncertainty in measurement' are discussed and suggestions to make this document consistent are commented. The paper is written taking into account the terminology of the third version of the 'International vocabulary of metrology'.

Update on PISCES

NASA Technical Reports Server (NTRS)

Pearson, Don; Hamm, Dustin; Kubena, Brian; Weaver, Jonathan K.

2010-01-01

An updated version of the Platform Independent Software Components for the Exploration of Space (PISCES) software library is available. A previous version was reported in Library for Developing Spacecraft-Mission-Planning Software (MSC-22983), NASA Tech Briefs, Vol. 25, No. 7 (July 2001), page 52. To recapitulate: This software provides for Web-based, collaborative development of computer programs for planning trajectories and trajectory- related aspects of spacecraft-mission design. The library was built using state-of-the-art object-oriented concepts and software-development methodologies. The components of PISCES include Java-language application programs arranged in a hierarchy of classes that facilitates the reuse of the components. As its full name suggests, the PISCES library affords platform-independence: The Java language makes it possible to use the classes and application programs with a Java virtual machine, which is available in most Web-browser programs. Another advantage is expandability: Object orientation facilitates expansion of the library through creation of a new class. Improvements in the library since the previous version include development of orbital-maneuver- planning and rendezvous-launch-window application programs, enhancement of capabilities for propagation of orbits, and development of a desktop user interface.

75 FR 19461 - Receipt of Petition for Decision That Nonconforming 2006 and 2007 Mercedes Benz G-Class Long...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-04-14

... in the English language, and be no greater than 15 pages in length, although there is no limit to the... component; (b) installation or activation of the U.S.-version control and display software; and (c..., Partition, and Roof Panel Systems: Installation or activation of U.S.-version software in the vehicle's...

Food Intake Recording Software System, version 4 (FIRSSt4): A self-completed 24-h dietary recall for children

USDA-ARS?s Scientific Manuscript database

The Food Intake Recording Software System, version 4 (FIRSSt4), is a web-based 24-h dietary recall (24 hdr) self-administered by children based on the Automated Self-Administered 24-h recall (ASA24) (a self-administered 24 hdr for adults). The food choices in FIRSSt4 are abbreviated to include only ...

DYNA3D Code Practices and Developments

DOE Office of Scientific and Technical Information (OSTI.GOV)

Lin, L.; Zywicz, E.; Raboin, P.

2000-04-21

DYNA3D is an explicit, finite element code developed to solve high rate dynamic simulations for problems of interest to the engineering mechanics community. The DYNA3D code has been under continuous development since 1976[1] by the Methods Development Group in the Mechanical Engineering Department of Lawrence Livermore National Laboratory. The pace of code development activities has substantially increased in the past five years, growing from one to between four and six code developers. This has necessitated the use of software tools such as CVS (Concurrent Versions System) to help manage multiple version updates. While on-line documentation with an Adobe PDF manualmore » helps to communicate software developments, periodically a summary document describing recent changes and improvements in DYNA3D software is needed. The first part of this report describes issues surrounding software versions and source control. The remainder of this report details the major capability improvements since the last publicly released version of DYNA3D in 1996. Not included here are the many hundreds of bug corrections and minor enhancements, nor the development in DYNA3D between the manual release in 1993[2] and the public code release in 1996.« less

Orbital

NASA Astrophysics Data System (ADS)

Hanson, Robert M.

2003-06-01

ORBITAL requires the following software, which is available for free download from the Internet: Netscape Navigator, version 4.75 or higher, or Microsoft Internet Explorer, version 5.0 or higher; Chime Plug-in, version compatible with your OS and browser (available from MDL).

Second generation experiments in fault tolerant software

NASA Technical Reports Server (NTRS)

Knight, J. C.

1987-01-01

The purpose of the Multi-Version Software (MVS) experiment is to obtain empirical measurements of the performance of multi-version systems. Twenty version of a program were prepared under reasonably realistic development conditions from the same specifications. The overall structure of the testing environment for the MVS experiment and its status are described. A preliminary version of the control system is described that was implemented for the MVS experiment to allow the experimenter to have control over the details of the testing. The results of an empirical study of error detection using self checks are also presented. The analysis of the checks revealed that there are great differences in the ability of individual programmers to design effective checks.

Super Cooled Large Droplet Analysis of Several Geometries Using LEWICE3D Version 3

NASA Technical Reports Server (NTRS)

Bidwell, Colin S.

2011-01-01

Super Cooled Large Droplet (SLD) collection efficiency calculations were performed for several geometries using the LEWICE3D Version 3 software. The computations were performed using the NASA Glenn Research Center SLD splashing model which has been incorporated into the LEWICE3D Version 3 software. Comparisons to experiment were made where available. The geometries included two straight wings, a swept 64A008 wing tip, two high lift geometries, and the generic commercial transport DLR-F4 wing body configuration. In general the LEWICE3D Version 3 computations compared well with the 2D LEWICE 3.2.2 results and with experimental data where available.

49 CFR 229.305 - Definitions.

Code of Federal Regulations, 2012 CFR

2012-10-01

... cohesion. Component means an electronic element, device, or appliance (including hardware or software) that... and software version, is documented and maintained through the life-cycle of the products in use. Executive software means software common to all installations of a given electronic product. It generally is...

49 CFR 229.305 - Definitions.

Code of Federal Regulations, 2013 CFR

2013-10-01

... cohesion. Component means an electronic element, device, or appliance (including hardware or software) that... and software version, is documented and maintained through the life-cycle of the products in use. Executive software means software common to all installations of a given electronic product. It generally is...

49 CFR 229.305 - Definitions.

Code of Federal Regulations, 2014 CFR

2014-10-01

... cohesion. Component means an electronic element, device, or appliance (including hardware or software) that... and software version, is documented and maintained through the life-cycle of the products in use. Executive software means software common to all installations of a given electronic product. It generally is...

JANIS 4: An Improved Version of the NEA Java-based Nuclear Data Information System

NASA Astrophysics Data System (ADS)

Soppera, N.; Bossant, M.; Dupont, E.

2014-06-01

JANIS is software developed to facilitate the visualization and manipulation of nuclear data, giving access to evaluated data libraries, and to the EXFOR and CINDA databases. It is stand-alone Java software, downloadable from the web and distributed on DVD. Used offline, the system also makes use of an internet connection to access the NEA Data Bank database. It is now also offered as a full web application, only requiring a browser. The features added in the latest version of the software and this new web interface are described.

JANIS 4: An Improved Version of the NEA Java-based Nuclear Data Information System

DOE Office of Scientific and Technical Information (OSTI.GOV)

Soppera, N., E-mail: nicolas.soppera@oecd.org; Bossant, M.; Dupont, E.

JANIS is software developed to facilitate the visualization and manipulation of nuclear data, giving access to evaluated data libraries, and to the EXFOR and CINDA databases. It is stand-alone Java software, downloadable from the web and distributed on DVD. Used offline, the system also makes use of an internet connection to access the NEA Data Bank database. It is now also offered as a full web application, only requiring a browser. The features added in the latest version of the software and this new web interface are described.

[Three-dimensional 3D modeling: First applications in radioanatomy and interventional radiology under CT guidance].

PubMed

Aubry, S; Pousse, A; Sarliève, P; Laborie, L; Delabrousse, E; Kastler, B

2006-11-01

To model vertebrae in 3D to improve radioanatomic knowledge of the spine with the vascular and nerve environment and simulate CT-guided interventions. Vertebra acquisitions were made with multidetector CT. We developed segmentation software and specific viewer software using the Delphi programming environment. This segmentation software makes it possible to model 3D high-resolution segments of vertebrae and their environment from multidetector CT acquisitions. Then the specific viewer software provides multiplanar reconstructions of the CT volume and the possibility to select different 3D objects of interest. This software package improves radiologists' radioanatomic knowledge through a new 3D anatomy presentation. Furthermore, the possibility of inserting virtual 3D objects in the volume can simulate CT-guided intervention. The first volumetric radioanatomic software has been born. Furthermore, it simulates CT-guided intervention and consequently has the potential to facilitate learning interventions using CT guidance.

Software Attribution for Geoscience Applications in the Computational Infrastructure for Geodynamics

NASA Astrophysics Data System (ADS)

Hwang, L.; Dumit, J.; Fish, A.; Soito, L.; Kellogg, L. H.; Smith, M.

2015-12-01

Scientific software is largely developed by individual scientists and represents a significant intellectual contribution to the field. As the scientific culture and funding agencies move towards an expectation that software be open-source, there is a corresponding need for mechanisms to cite software, both to provide credit and recognition to developers, and to aid in discoverability of software and scientific reproducibility. We assess the geodynamic modeling community's current citation practices by examining more than 300 predominantly self-reported publications utilizing scientific software in the past 5 years that is available through the Computational Infrastructure for Geodynamics (CIG). Preliminary results indicate that authors cite and attribute software either through citing (in rank order) peer-reviewed scientific publications, a user's manual, and/or a paper describing the software code. Attributions maybe found directly in the text, in acknowledgements, in figure captions, or in footnotes. What is considered citable varies widely. Citations predominantly lack software version numbers or persistent identifiers to find the software package. Versioning may be implied through reference to a versioned user manual. Authors sometimes report code features used and whether they have modified the code. As an open-source community, CIG requests that researchers contribute their modifications to the repository. However, such modifications may not be contributed back to a repository code branch, decreasing the chances of discoverability and reproducibility. Survey results through CIG's Software Attribution for Geoscience Applications (SAGA) project suggest that lack of knowledge, tools, and workflows to cite codes are barriers to effectively implement the emerging citation norms. Generated on-demand attributions on software landing pages and a prototype extensible plug-in to automatically generate attributions in codes are the first steps towards reproducibility.

Integrated Baseline System (IBS), Version 1. 03. [Chemical Stockpile Emergency Preparedness Program

DOE Office of Scientific and Technical Information (OSTI.GOV)

Bailey, B.M.; Burford, M.J.; Downing, T.R.

The Integrated Baseline System (IBS), operated by the Federal Emergency Management Agency (FEMA), is a system of computerized tools for emergency planing and analysis. This document is the user guide for the IBS and explains how to operate the IBS system. The fundamental function of the IBS is to provide tools that civilian emergency management personnel can use in developing emergency plans and in supporting emergency management activities to cope with a chemical-releasing event at a military chemical stockpile. Emergency management planners can evaluate concepts and ideas using the IBS system. The results of that experience can then be factoredmore » into refining requirements and plans. This document provides information for the general system user, and is the primary reference for the system features of the IBS. It is designed for persons who are familiar with general emergency management concepts, operations, and vocabulary. Although the IBS manual set covers basic and advanced operations, it is not a complete reference document set. Emergency situation modeling software in the IBS is supported by additional technical documents. Some of the other LBS software is commercial software for which more complete documentation is available. The IBS manuals reference such documentation where necessary. IBS is a dynamic system. Its capabilities are in a state of continuing expansion and enhancement.« less

SmaggIce 2D Version 1.8: Software Toolkit Developed for Aerodynamic Simulation Over Iced Airfoils

NASA Technical Reports Server (NTRS)

Choo, Yung K.; Vickerman, Mary B.

2005-01-01

SmaggIce 2D version 1.8 is a software toolkit developed at the NASA Glenn Research Center that consists of tools for modeling the geometry of and generating the grids for clean and iced airfoils. Plans call for the completed SmaggIce 2D version 2.0 to streamline the entire aerodynamic simulation process--the characterization and modeling of ice shapes, grid generation, and flow simulation--and to be closely coupled with the public-domain application flow solver, WIND. Grid generated using version 1.8, however, can be used by other flow solvers. SmaggIce 2D will help researchers and engineers study the effects of ice accretion on airfoil performance, which is difficult to do with existing software tools because of complex ice shapes. Using SmaggIce 2D, when fully developed, to simulate flow over an iced airfoil will help to reduce the cost of performing flight and wind-tunnel tests for certifying aircraft in natural and simulated icing conditions.

Don't give an inch!

NASA Astrophysics Data System (ADS)

Geller, Robert J.

The camera ready copy (CRC) procedures for Geophysical Research Letters are now being revised. As one of the new editors, I looked through preliminary versions of the new forms and instructions for authors. Remarkably, all of the units (for example, maximum length = 75 inches or 189.9 cm) are given in both British and metric units, despite the fact that AGU's style guide for authors (Eos, October 11, 1988) states that “all quantities must be in metric units.”When I contacted the AGU staff to ask them to eliminate the anachronistic British units they refused, claiming that “In the word-processing packages with which we are familiar all margins are given in inches. It is inconvenient for folks not to have both measurements if the software they are using for making CRC requires them to give commands in the British system.” They did not, however, cite any examples of a software package that will not also accept metric units, perhaps because none exists. All packages with which I am familiar accept both inches and metric units.

User Manual for Beta Version of TURBO-GRD: A Software System for Interactive Two-Dimensional Boundary/ Field Grid Generation, Modification, and Refinement

NASA Technical Reports Server (NTRS)

Choo, Yung K.; Slater, John W.; Henderson, Todd L.; Bidwell, Colin S.; Braun, Donald C.; Chung, Joongkee

1998-01-01

TURBO-GRD is a software system for interactive two-dimensional boundary/field grid generation. modification, and refinement. Its features allow users to explicitly control grid quality locally and globally. The grid control can be achieved interactively by using control points that the user picks and moves on the workstation monitor or by direct stretching and refining. The techniques used in the code are the control point form of algebraic grid generation, a damped cubic spline for edge meshing and parametric mapping between physical and computational domains. It also performs elliptic grid smoothing and free-form boundary control for boundary geometry manipulation. Internal block boundaries are constructed and shaped by using Bezier curve. Because TURBO-GRD is a highly interactive code, users can read in an initial solution, display its solution contour in the background of the grid and control net, and exercise grid modification using the solution contour as a guide. This process can be called an interactive solution-adaptive grid generation.

Doing Qualitative Research Using Your Computer: A Practical Guide

ERIC Educational Resources Information Center

Hahn, Chris

2008-01-01

This book is a practical, hands-on guide to using commonly available everyday technology, including Microsoft software, to manage and streamline research projects. It uses straight-forward, everyday language to walk readers through this process, drawing on a wide range of examples to demonstrate how easy it is to use such software. This guide is…

A Guide to Fast and Simple Web Site Development. Using Microsoft FrontPage.

ERIC Educational Resources Information Center

La, Minh; Beachler, Judith

Designed by California's Los Rios Community College District for use in instructional workshops, this guide is intended to help institutional researchers create World Wide Web sites using Microsoft FrontPage (MF) software. The first part of the guide presents practical suggestions for working with the software to create a site, covering the…

A Padawan Programmer's Guide to Developing Software Libraries.

PubMed

Yurkovich, James T; Yurkovich, Benjamin J; Dräger, Andreas; Palsson, Bernhard O; King, Zachary A

2017-11-22

With the rapid adoption of computational tools in the life sciences, scientists are taking on the challenge of developing their own software libraries and releasing them for public use. This trend is being accelerated by popular technologies and platforms, such as GitHub, Jupyter, R/Shiny, that make it easier to develop scientific software and by open-source licenses that make it easier to release software. But how do you build a software library that people will use? And what characteristics do the best libraries have that make them enduringly popular? Here, we provide a reference guide, based on our own experiences, for developing software libraries along with real-world examples to help provide context for scientists who are learning about these concepts for the first time. While we can only scratch the surface of these topics, we hope that this article will act as a guide for scientists who want to write great software that is built to last. Copyright © 2017 Elsevier Inc. All rights reserved.

Cementitious Barriers Partnership FY2013 End-Year Report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Flach, G. P.; Langton, C. A.; Burns, H. H.

2013-11-01

In FY2013, the Cementitious Barriers Partnership (CBP) demonstrated continued tangible progress toward fulfilling the objective of developing a set of software tools to improve understanding and prediction of the long-term structural, hydraulic and chemical performance of cementitious barriers used in nuclear applications. In November 2012, the CBP released “Version 1.0” of the CBP Software Toolbox, a suite of software for simulating reactive transport in cementitious materials and important degradation phenomena. In addition, the CBP completed development of new software for the “Version 2.0” Toolbox to be released in early FY2014 and demonstrated use of the Version 1.0 Toolbox on DOEmore » applications. The current primary software components in both Versions 1.0 and 2.0 are LeachXS/ORCHESTRA, STADIUM, and a GoldSim interface for probabilistic analysis of selected degradation scenarios. The CBP Software Toolbox Version 1.0 supports analysis of external sulfate attack (including damage mechanics), carbonation, and primary constituent leaching. Version 2.0 includes the additional analysis of chloride attack and dual regime flow and contaminant migration in fractured and non-fractured cementitious material. The LeachXS component embodies an extensive material property measurements database along with chemical speciation and reactive mass transport simulation cases with emphasis on leaching of major, trace and radionuclide constituents from cementitious materials used in DOE facilities, such as Saltstone (Savannah River) and Cast Stone (Hanford), tank closure grouts, and barrier concretes. STADIUM focuses on the physical and structural service life of materials and components based on chemical speciation and reactive mass transport of major cement constituents and aggressive species (e.g., chloride, sulfate, etc.). THAMES is a planned future CBP Toolbox component focused on simulation of the microstructure of cementitious materials and calculation of resultant hydraulic and constituent mass transfer parameters needed in modeling. Two CBP software demonstrations were conducted in FY2013, one to support the Saltstone Disposal Facility (SDF) at SRS and the other on a representative Hanford high-level waste tank. The CBP Toolbox demonstration on the SDF provided analysis on the most probable degradation mechanisms to the cementitious vault enclosure caused by sulfate and carbonation ingress. This analysis was documented and resulted in the issuance of a SDF Performance Assessment Special Analysis by Liquid Waste Operations this fiscal year. The two new software tools supporting chloride attack and dual-regime flow will provide additional degradation tools to better evaluate performance of DOE and commercial cementitious barriers. The CBP SRNL experimental program produced two patent applications and field data that will be used in the development and calibration of CBP software tools being developed in FY2014. The CBP software and simulation tools varies from other efforts in that all the tools are based upon specific and relevant experimental research of cementitious materials utilized in DOE applications. The CBP FY2013 program involved continuing research to improve and enhance the simulation tools as well as developing new tools that model other key degradation phenomena not addressed in Version 1.0. Also efforts to continue to verify the various simulation tools through laboratory experiments and analysis of field specimens are ongoing and will continue into FY2014 to quantify and reduce the uncertainty associated with performance assessments. This end-year report summarizes FY2013 software development efforts and the various experimental programs that are providing data for calibration and validation of the CBP developed software.« less

User's Guide to the Western Root Disease Model, Version 3.0

Treesearch

Susan J. Frankel

1998-01-01

Effects of Armillaria spp., Phellinus weirii, Heterobasidion annosum, or bark beetles on stand dynamics are represented by the Western Root Disease Model,Version 3.0. This model, which operates in conjunction with the Forest Vegetation Simulator, can be used to evaluate the effects of many silvicultural practices. This guide contains instructions for use, detailed...

Age Matters: Student Experiences with Audio Learning Guides in University-Based Continuing Education

ERIC Educational Resources Information Center

Mercer, Lorraine; Pianosi, Birgit

2012-01-01

The primary objective of this research was to explore the experiences of undergraduate distance education students using sample audio versions (provided on compact disc) of the learning guides for their courses. The results of this study indicated that students responded positively to the opportunity to have word-for-word audio versions of their…

SBexpert users guide (version 1.0): a knowledge-based decision-support system for spruce beetle management.

Treesearch

Keith M. Reynolds; Edward H. Holsten; Richard A. Werner

1994-01-01

SBexpert version 1.0 is a knowledge-based decision-support system for spruce beetle (Dendroctonus rutipennis (Kby.)) management developed for use in Microsoft Windows with the KnowledgePro Windows development language. The SBexpert users guide provides detailed instructions on the use of all SBexpert features. SBexpert has four main topics (...

Integrated Farm System Model Version 4.1 and Dairy Gas Emissions Model Version 3.1 software release and distribution

USDA-ARS?s Scientific Manuscript database

Animal facilities are significant contributors of gaseous emissions including ammonia (NH3) and nitrous oxide (N2O). Previous versions of the Integrated Farm System Model (IFSM version 4.0) and Dairy Gas Emissions Model (DairyGEM version 3.0), two whole-farm simulation models developed by USDA-ARS, ...

DOEDEF Software System, Version 2. 2: Operational instructions

DOE Office of Scientific and Technical Information (OSTI.GOV)

Meirans, L.

The DOEDEF (Department of Energy Data Exchange Format) Software System is a collection of software routines written to facilitate the manipulation of IGES (Initial Graphics Exchange Specification) data. Typically, the IGES data has been produced by the IGES processors for a Computer-Aided Design (CAD) system, and the data manipulations are user-defined ''flavoring'' operations. The DOEDEF Software System is used in conjunction with the RIM (Relational Information Management) DBMS from Boeing Computer Services (Version 7, UD18 or higher). The three major pieces of the software system are: Parser, reads an ASCII IGES file and converts it to the RIM database equivalent;more » Kernel, provides the user with IGES-oriented interface routines to the database; and Filewriter, writes the RIM database to an IGES file.« less

76 FR 17757 - Airworthiness Directives; Thielert Aircraft Engines GmbH Models TAE 125-01, TAE 125-02-99, and...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-03-31

...: Service experience has shown that a case of FADEC channel B manifold air pressure (MAP) sensor hose... combustion chamber and thus the available power of the engine. A change in FADEC software version 2.91 will..., previous software versions allow--under certain conditions and on DA 42 aircraft only--the initiation of a...

76 FR 70382 - Airworthiness Directives; General Electric Company (GE) CF6-80C2B Series Turbofan Engines

Federal Register 2010, 2011, 2012, 2013, 2014

2011-11-14

... installing software version 8.2.Q1 to the engine electronic control unit (ECU), which increases the engine's... proposed AD would require the removal of the affected ECUs from service. We are proposing this AD to... software version 8.2.Q1 to the ECU, which increases the engine's margin to flameout. That AD was prompted...

HiRel: Hybrid Automated Reliability Predictor (HARP) integrated reliability tool system, (version 7.0). Volume 4: HARP Output (HARPO) graphics display user's guide

NASA Technical Reports Server (NTRS)

Sproles, Darrell W.; Bavuso, Salvatore J.

1994-01-01

The Hybrid Automated Reliability Predictor (HARP) integrated Reliability (HiRel) tool system for reliability/availability prediction offers a toolbox of integrated reliability/availability programs that can be used to customize the user's application in a workstation or nonworkstation environment. HiRel consists of interactive graphical input/output programs and four reliability/availability modeling engines that provide analytical and simulative solutions to a wide host of highly reliable fault-tolerant system architectures and is also applicable to electronic systems in general. The tool system was designed at the outset to be compatible with most computing platforms and operating systems and some programs have been beta tested within the aerospace community for over 8 years. This document is a user's guide for the HiRel graphical postprocessor program HARPO (HARP Output). HARPO reads ASCII files generated by HARP. It provides an interactive plotting capability that can be used to display alternate model data for trade-off analyses. File data can also be imported to other commercial software programs.

SAGA: A project to automate the management of software production systems

NASA Technical Reports Server (NTRS)

Campbell, Roy H.; Laliberte, D.; Render, H.; Sum, R.; Smith, W.; Terwilliger, R.

1987-01-01

The Software Automation, Generation and Administration (SAGA) project is investigating the design and construction of practical software engineering environments for developing and maintaining aerospace systems and applications software. The research includes the practical organization of the software lifecycle, configuration management, software requirements specifications, executable specifications, design methodologies, programming, verification, validation and testing, version control, maintenance, the reuse of software, software libraries, documentation, and automated management.

Reviews

NASA Astrophysics Data System (ADS)

2005-07-01

WE RECOMMEND When Physics Became King This book delves into the history of science since the 18th century. The History of the Laser An interesting read that will teach you far more than its title suggests. History of Physics Selected Reprints A fascinating collection of physics papers spanning four decades. Datalogging set-ups Five great products from Leybold Didactic’s CASSY range. Videocom Measure motion and convert it to graphs with this great device. Basic Raybox This simple piece of equipment offers great performance. WORTH A LOOK Virtual Physics Lab John Nunn’s software demystifies science using clear illustrations. HANDLE WITH CARE Microchem Electricity Kit This box of equipment for introducing electricity lacks quality. Raymond the Raybox A disappointing raybox. The basic version reviewed on p389 is better. WEB WATCH A rough guide to e-learning.

A user-friendly means to scale from the biochemistry of photosynthesis to whole crop canopies and production in time and space - development of Java WIMOVAC.

PubMed

Song, Qingfeng; Chen, Dairui; Long, Stephen P; Zhu, Xin-Guang

2017-01-01

Windows Intuitive Model of Vegetation response to Atmosphere and Climate Change (WIMOVAC) has been used widely as a generic modular mechanistically rich model of plant production. It can predict the responses of leaf and canopy carbon balance, as well as production in different environmental conditions, in particular those relevant to global change. Here, we introduce an open source Java user-friendly version of WIMOVAC. This software is platform independent and can be easily downloaded to a laptop and used without any prior programming skills. In this article, we describe the structure, equations and user guide and illustrate some potential applications of WIMOVAC. © 2016 The Authors Plant, Cell & Environment Published by John Wiley & Sons Ltd.

Using the General Mission Analysis Tool (GMAT)

NASA Technical Reports Server (NTRS)

Hughes, Steven P.; Conway, Darrel J.; Parker, Joel

2017-01-01

This is a software tutorial and presentation demonstrating the application of the General Mission Analysis Tool (GMAT). These slides will be used to accompany the demonstration. The demonstration discusses GMAT basics, then presents a detailed example of GMAT application to the Transiting Exoplanet Survey Satellite (TESS) mission. This talk is a combination of existing presentations and material; system user guide and technical documentation; a GMAT basics and overview, and technical presentations from the TESS projects on their application of GMAT to critical mission design. The GMAT basics slides are taken from the open source training material. The TESS slides are a streamlined version of the CDR package provided by the project with SBU and ITAR data removed by the TESS project. Slides for navigation and optimal control are borrowed from system documentation and training material.

Montage Version 3.0

NASA Technical Reports Server (NTRS)

Jacob, Joseph; Katz, Daniel; Prince, Thomas; Berriman, Graham; Good, John; Laity, Anastasia

2006-01-01

The final version (3.0) of the Montage software has been released. To recapitulate from previous NASA Tech Briefs articles about Montage: This software generates custom, science-grade mosaics of astronomical images on demand from input files that comply with the Flexible Image Transport System (FITS) standard and contain image data registered on projections that comply with the World Coordinate System (WCS) standards. This software can be executed on single-processor computers, multi-processor computers, and such networks of geographically dispersed computers as the National Science Foundation s TeraGrid or NASA s Information Power Grid. The primary advantage of running Montage in a grid environment is that computations can be done on a remote supercomputer for efficiency. Multiple computers at different sites can be used for different parts of a computation a significant advantage in cases of computations for large mosaics that demand more processor time than is available at any one site. Version 3.0 incorporates several improvements over prior versions. The most significant improvement is that this version is accessible to scientists located anywhere, through operational Web services that provide access to data from several large astronomical surveys and construct mosaics on either local workstations or remote computational grids as needed.

Digital Control of the Czochralski Growth of Gallium Arsenide. System Reference Manual. Valid for Czochralski Growth Controller Software Version 2.4

DTIC Science & Technology

1988-01-04

Controller Routine .......... ........................ 405 -viii- ’ O, ...1 . • N SList of Illustrations i p List of Illustrations . Fig. 1: A...J------ - - - 6 - -- -w -- -w -r n . w ~ - P a CGCS Program Versions ~CGCS Program Versions This section describes the "evolution" of the...8217 ~- 134 - ,d" - 1’ , n "W , ’." " a 4 r P . ’ ,’ r t r 1 "."." , . L t * 5.1 CGCS Concept and Structure 5. The Czochralski Growth Control System Software

Influence analysis of Github repositories.

PubMed

Hu, Yan; Zhang, Jun; Bai, Xiaomei; Yu, Shuo; Yang, Zhuo

2016-01-01

With the support of cloud computing techniques, social coding platforms have changed the style of software development. Github is now the most popular social coding platform and project hosting service. Software developers of various levels keep entering Github, and use Github to save their public and private software projects. The large amounts of software developers and software repositories on Github are posing new challenges to the world of software engineering. This paper tries to tackle one of the important problems: analyzing the importance and influence of Github repositories. We proposed a HITS based influence analysis on graphs that represent the star relationship between Github users and repositories. A weighted version of HITS is applied to the overall star graph, and generates a different set of top influential repositories other than the results from standard version of HITS algorithm. We also conduct the influential analysis on per-month star graph, and study the monthly influence ranking of top repositories.

Aircraft/Air Traffic Management Functional Analysis Model. Version 2.0; User's Guide

NASA Technical Reports Server (NTRS)

Etheridge, Melvin; Plugge, Joana; Retina, Nusrat

1998-01-01

The Aircraft/Air Traffic Management Functional Analysis Model, Version 2.0 (FAM 2.0), is a discrete event simulation model designed to support analysis of alternative concepts in air traffic management and control. FAM 2.0 was developed by the Logistics Management Institute (LMI) a National Aeronautics and Space Administration (NASA) contract. This document provides a guide for using the model in analysis. Those interested in making enhancements or modification to the model should consult the companion document, Aircraft/Air Traffic Management Functional Analysis Model, Version 2.0 Technical Description.

Assessment of factors impacting success for incoming college engineering students in a summer bridge program

NASA Astrophysics Data System (ADS)

Reisel, John R.; Jablonski, Marissa; Hosseini, Hossein; Munson, Ethan

2012-06-01

A summer bridge program for incoming engineering and computer science freshmen has been used at the University of Wisconsin-Milwaukee from 2007 to 2010. The primary purpose of this program has been to improve the mathematics course placement for incoming students who initially place into a course below Calculus I on the math placement examination. The students retake the university's math placement examination after completing the bridge program to determine if they then place into a higher-level mathematics course. If the students improve their math placement, the program is considered successful for that student. The math portion of the bridge program is designed around using the ALEKS software package for targeted, self-guided learning. In the 2007 and 2008 versions of the program, both an on-line version and an on-campus version with additional instruction were offered. In 2009 and 2010, the program was exclusively in an on-campus format, and also featured a required residential component and additional engineering activities for the students. From the results of these four programs, we are able to evaluate the success of the program in its different formats. In addition, data has been collected and analysed regarding the impact of other factors on the program's success. The factors include student preparation before the beginning of the program (as measured by math ACT scores) and the amount of time the student spent working on the material during the program. Better math preparation and the amount of time spent on the program were found to be good indicators of success. Furthermore, the on-campus version of the program is more effective than the on-line version.

Dynamic Assembly, Assessment, Assurance, and Adaptation via Heterogeneous Software Connectors

DTIC Science & Technology

2004-10-01

Versioning Connectors (MVC) Representative of runtime monitoring gauges are multiversioning gauges, which monitor and analyze different versions of...multiple versions of the same component must be merged by the connector before they are forwarded to their target components. The multiversioning

NHTSA data reference guide version 4. Volume 3, component tests

DOT National Transportation Integrated Search

1997-04-01

This guide documents the format of magnetic media (3.5 inch high density diskettes) to be submitted : to the National Highway Traffic Safety Administration (NHTSA) for component tests. This guide is : designated Volume III. NHTSA Data Reference Guide...

User's Manual for LEWICE Version 3.2

NASA Technical Reports Server (NTRS)

Wright, William

2008-01-01

A research project is underway at NASA Glenn to produce a computer code which can accurately predict ice growth under a wide range of meteorological conditions for any aircraft surface. This report will present a description of the code inputs and outputs from version 3.2 of this software, which is called LEWICE. This version differs from release 2.0 due to the addition of advanced thermal analysis capabilities for de-icing and anti-icing applications using electrothermal heaters or bleed air applications, the addition of automated Navier-Stokes analysis, an empirical model for supercooled large droplets (SLD) and a pneumatic boot option. An extensive effort was also undertaken to compare the results against the database of electrothermal results which have been generated in the NASA Glenn Icing Research Tunnel (IRT) as was performed for the validation effort for version 2.0. This report will primarily describe the features of the software related to the use of the program. Appendix A has been included to list some of the inner workings of the software or the physical models used. This information is also available in the form of several unpublished documents internal to NASA. This report is intended as a replacement for all previous user manuals of LEWICE. In addition to describing the changes and improvements made for this version, information from previous manuals may be duplicated so that the user will not need to consult previous manuals to use this software.

CSMP Mathematics for the Intermediate Grades Part IV, Teacher's Guide. General Introduction. Workbooks. Experimental Version.

ERIC Educational Resources Information Center

Armstrong, Richard; And Others

This guide represents the final experimental version of a pilot project which was conducted in the United States between 1973 and 1976. The ideas and the manner of presentation are based on the works of Georges and Frederique Papy. They are recognized for having introduced colored arrow drawings ("papygrams") and models of our numeration…

CSMP Mathematics for the Intermediate Grades Part I, Teacher's Guide. General Introduction. Workbooks. Experimental Version.

ERIC Educational Resources Information Center

Kaufman, Burt; And Others

This guide represents the final experimental version of an extended pilot project which was conducted in the United States between 1973 and 1976. The manner of presentation and pedagogical ideas and tools are based on the works of George and Frederique Papy. They are recognized as having introduced colored arrow drawings ("papygrams")…

CSMP Mathematics for the Intermediate Grades Part III, Teacher's Guide [and] Worksheets. General Introduction. Workbooks. Experimental Version.

ERIC Educational Resources Information Center

Harpel, Jim; And Others

This guide represents the final experimental version of a pilot project which was conducted in the United States between 1973 and 1976. The ideas and the manner of presentation are based on the works of Georges and Frederique Papy. They are recognized for having introduced colored arrow drawings ("papygrams") and models of our numeration…

CSMP Mathematics for the Intermediate Grades Part I, Teacher's Guide [and] Worksheets. The World of Numbers. Experimental Version.

ERIC Educational Resources Information Center

CEMREL, Inc., St. Ann, MO.

This guide represents the final experimental version of an extended pilot project which was conducted in the United States between 1973 and 1976. The manner of presentation and pedagogical ideas and tools are based on the works of Georges and Frederique Papy. They are recognized as having introduced colored arrow drawings ("papygrams")…

CSMP Mathematics for the Intermediate Grades Part III, Teacher's Guide. The World of Numbers. Experimental Version.

ERIC Educational Resources Information Center

CEMREL, Inc., St. Ann, MO.

This guide represents the final experimental version of a pilot project which was conducted in the United States between 1973 and 1976. The ideas and the manner of presentation are based on the works of Georges and Frederique Papy. They are recognized for having introduced colored arrow drawings ("papygrams") and models of our numeration…

CSMP Mathematics for the Intermediate Grades Part II, Teacher's Guide. General Introduction. Workbooks. Experimental Version.

ERIC Educational Resources Information Center

Harpel, Jim; And Others

This guide represents the final experimental version of a pilot project which was conducted in the United States between 1973 and 1976. The ideas and the manner of presentation are based on the works of Georges and Frederique Papy. They are recognized for having introduced colored arrow drawings ("papygrams") and models of our numeration…

CSMP Mathematics for the Intermediate Grades Part IV, Teacher's Guide. The World of Numbers. Experimental Version.

ERIC Educational Resources Information Center

CEMREL, Inc., St. Ann, MO.

This guide represents the final experimental version of a pilot project which was conducted in the United States between 1973 and 1976. The ideas and the manner of presentation are based on the works of Georges and Frederique Papy. They are recognized for having introduced colored arrow drawings ("papygrams") and models of our numeration…

An off-the-shelf guider for the Palomar 200-inch telescope: interfacing amateur astronomy software with professional telescopes for an easy life

NASA Astrophysics Data System (ADS)

Clarke, Fraser; Lynn, James; Thatte, Niranjan; Tecza, Matthias

2014-08-01

We have developed a simple but effective guider for use with the Oxford-SWIFT integral field spectrograph on the Palomar 200-inch telescope. The guider uses mainly off-the-shelf components, including commercial amateur astronomy software to interface with the CCD camera, calculating guiding corrections, and send guide commands to the telescope. The only custom piece of software is an driver to provide an interface between the Palomar telescope control system and the industry standard 'ASCOM' system. Using existing commercial software provided a very cheap guider (<$5000) with minimal (<15 minutes) commissioning time. The final system provides sub-arcsecond guiding, and could easily be adapted to any other professional telescope

Source Code Analysis Laboratory (SCALe)

DTIC Science & Technology

2012-04-01

Versus Flagged Nonconformities (FNC) Software System TP/FNC Ratio Mozilla Firefox version 2.0 6/12 50% Linux kernel version 2.6.15 10/126 8...is inappropriately tuned for analysis of the Linux kernel, which has anomalous results. Customizing SCALe to work with software for a particular...servers support a collection of virtual machines (VMs) that can be configured to support analysis in various environments, such as Windows XP and Linux . A

Wolf Testing: Open Source Testing Software

NASA Astrophysics Data System (ADS)

Braasch, P.; Gay, P. L.

2004-12-01

Wolf Testing is software for easily creating and editing exams. Wolf Testing allows the user to create an exam from a database of questions, view it on screen, and easily print it along with the corresponding answer guide. The questions can be multiple choice, short answer, long answer, or true and false varieties. This software can be accessed securely from any location, allowing the user to easily create exams from home. New questions, which can include associated pictures, can be added through a web-interface. After adding in questions, they can be edited, deleted, or duplicated into multiple versions. Long-term test creation is simplified, as you are able to quickly see what questions you have asked in the past and insert them, with or without editing, into future tests. All tests are archived in the database. Written in PHP and MySQL, this software can be installed on any UNIX / Linux platform, including Macintosh OS X. The secure interface keeps students out, and allows you to decide who can create tests and who can edit information already in the database. Tests can be output as either html with pictures or rich text without pictures, and there are plans to add PDF and MS Word formats as well. We would like to thank Dr. Wolfgang Rueckner and the Harvard University Science Center for providing incentive to start this project, computers and resources to complete this project, and inspiration for the project's name. We would also like to thank Dr. Ronald Newburgh for his assistance in beta testing.

A new vector radiative transfer model as a part of SCIATRAN 3.0 software package.

NASA Astrophysics Data System (ADS)

Rozanov, Alexei; Rozanov, Vladimir; Burrows, John P.

The SCIATRAN 3.0 package is a result of further development of the SCIATRAN 2.x software family which, similar to previous versions, comprises a radiative transfer model and a retrieval block. A major improvement was achieved in comparison to previous software versions by adding the vector mode to the radiative transfer model. Thus, the well-established Discrete Ordinate solver can now be run in the vector mode to calculate the scattered solar radiation including polarization, i.e., to simulate all four components of the Stockes vector. Similar to the scalar version, the simulations can be performed for any viewing geometry typical for atmospheric observations in the UV-Vis-NIR spectral range (nadir, limb, off-axis, etc.) as well as for any observer position within or outside the Earth's atmosphere. Similar to the precursor version, the new model is freely available for non-commercial use via the web page of the University of Bremen. In this presentation a short description of the software package, especially of the new vector radiative transfer model will be given, including remarks on the availability for the scientific community. Furthermore, comparisons to other vector models will be shown and some example problems will be considered where the polarization of the observed radiation must be accounted for to obtain high quality results.

EOS MLS Level 1B Data Processing Software. Version 3

NASA Technical Reports Server (NTRS)

Perun, Vincent S.; Jarnot, Robert F.; Wagner, Paul A.; Cofield, Richard E., IV; Nguyen, Honghanh T.; Vuu, Christina

2011-01-01

This software is an improvement on Version 2, which was described in EOS MLS Level 1B Data Processing, Version 2.2, NASA Tech Briefs, Vol. 33, No. 5 (May 2009), p. 34. It accepts the EOS MLS Level 0 science/engineering data, and the EOS Aura spacecraft ephemeris/attitude data, and produces calibrated instrument radiances and associated engineering and diagnostic data. This version makes the code more robust, improves calibration, provides more diagnostics outputs, defines the Galactic core more finely, and fixes the equator crossing. The Level 1 processing software manages several different tasks. It qualifies each data quantity using instrument configuration and checksum data, as well as data transmission quality flags. Statistical tests are applied for data quality and reasonableness. The instrument engineering data (e.g., voltages, currents, temperatures, and encoder angles) is calibrated by the software, and the filter channel space reference measurements are interpolated onto the times of each limb measurement with the interpolates being differenced from the measurements. Filter channel calibration target measurements are interpolated onto the times of each limb measurement, and are used to compute radiometric gain. The total signal power is determined and analyzed by each digital autocorrelator spectrometer (DACS) during each data integration. The software converts each DACS data integration from an autocorrelation measurement in the time domain into a spectral measurement in the frequency domain, and estimates separately the spectrally, smoothly varying and spectrally averaged components of the limb port signal arising from antenna emission and scattering effects. Limb radiances are also calibrated.

User's guide to Model Viewer, a program for three-dimensional visualization of ground-water model results

USGS Publications Warehouse

Hsieh, Paul A.; Winston, Richard B.

2002-01-01

Model Viewer is a computer program that displays the results of three-dimensional groundwater models. Scalar data (such as hydraulic head or solute concentration) may be displayed as a solid or a set of isosurfaces, using a red-to-blue color spectrum to represent a range of scalar values. Vector data (such as velocity or specific discharge) are represented by lines oriented to the vector direction and scaled to the vector magnitude. Model Viewer can also display pathlines, cells or nodes that represent model features such as streams and wells, and auxiliary graphic objects such as grid lines and coordinate axes. Users may crop the model grid in different orientations to examine the interior structure of the data. For transient simulations, Model Viewer can animate the time evolution of the simulated quantities. The current version (1.0) of Model Viewer runs on Microsoft Windows 95, 98, NT and 2000 operating systems, and supports the following models: MODFLOW-2000, MODFLOW-2000 with the Ground-Water Transport Process, MODFLOW-96, MOC3D (Version 3.5), MODPATH, MT3DMS, and SUTRA (Version 2D3D.1). Model Viewer is designed to directly read input and output files from these models, thus minimizing the need for additional postprocessing. This report provides an overview of Model Viewer. Complete instructions on how to use the software are provided in the on-line help pages.

Separation of Acids, Bases, and Neutral Compounds

NASA Astrophysics Data System (ADS)

Fujita, Megumi; Mah, Helen M.; Sgarbi, Paulo W. M.; Lall, Manjinder S.; Ly, Tai Wei; Browne, Lois M.

2003-01-01

Separation of Acids, Bases, and Neutral Compounds requires the following software, which is available for free download from the Internet: Netscape Navigator, version 4.75 or higher, or Microsoft Internet Explorer, version 5.0 or higher; Chime plug-in, version compatible with your OS and browser (available from MDL); and Flash player, version 5 or higher (available from Macromedia).

Debunking Astronomical Fiction Science: A Resource Guide

NASA Astrophysics Data System (ADS)

Fraknoi, A.

2010-08-01

This resource guide is for educators who receive questions about controversial topics and want readings or websites to brush up on the facts or to recommend to students or the public. This is by no means a complete list, but a short guide of some of the key resources that may be of help. A version of this was distributed at the meeting during the oral session. Longer version of this list can be found online at http://www.astrosociety.org/education/resources/pseudobib.html.

Application of the MAFFT sequence alignment program to large data—reexamination of the usefulness of chained guide trees

PubMed Central

Yamada, Kazunori D.; Tomii, Kentaro; Katoh, Kazutaka

2016-01-01

Motivation: Large multiple sequence alignments (MSAs), consisting of thousands of sequences, are becoming more and more common, due to advances in sequencing technologies. The MAFFT MSA program has several options for building large MSAs, but their performances have not been sufficiently assessed yet, because realistic benchmarking of large MSAs has been difficult. Recently, such assessments have been made possible through the HomFam and ContTest benchmark protein datasets. Along with the development of these datasets, an interesting theory was proposed: chained guide trees increase the accuracy of MSAs of structurally conserved regions. This theory challenges the basis of progressive alignment methods and needs to be examined by being compared with other known methods including computationally intensive ones. Results: We used HomFam, ContTest and OXFam (an extended version of OXBench) to evaluate several methods enabled in MAFFT: (1) a progressive method with approximate guide trees, (2) a progressive method with chained guide trees, (3) a combination of an iterative refinement method and a progressive method and (4) a less approximate progressive method that uses a rigorous guide tree and consistency score. Other programs, Clustal Omega and UPP, available for large MSAs, were also included into the comparison. The effect of method 2 (chained guide trees) was positive in ContTest but negative in HomFam and OXFam. Methods 3 and 4 increased the benchmark scores more consistently than method 2 for the three datasets, suggesting that they are safer to use. Availability and Implementation: http://mafft.cbrc.jp/alignment/software/ Contact: katoh@ifrec.osaka-u.ac.jp Supplementary information: Supplementary data are available at Bioinformatics online. PMID:27378296

NASA Scope and Subject Category Guide

NASA Technical Reports Server (NTRS)

2011-01-01

This guide provides a simple, effective tool to assist aerospace information analysts and database builders in the high-level subject classification of technical materials. Each of the 76 subject categories comprising the classification scheme is presented with a description of category scope, a listing of subtopics, cross references, and an indication of particular areas of NASA interest. The guide also includes an index of nearly 3,000 specific research topics cross referenced to the subject categories. The portable document format (PDF) version of the guide contains links in the index from each input subject to its corresponding categories. In addition to subject classification, the guide can serve as an aid to searching databases that use the classification scheme, and is also an excellent selection guide for those involved in the acquisition of aerospace literature. The CD-ROM contains both HTML and PDF versions.

CBT Pilot Program Instructional Guide. Basic Drafting Skills Curriculum Delivered through CAD Workstations and Artificial Intelligence Software.

ERIC Educational Resources Information Center

Smith, Richard J.; Sauer, Mardelle A.

This guide is intended to assist teachers in using computer-aided design (CAD) workstations and artificial intelligence software to teach basic drafting skills. The guide outlines a 7-unit shell program that may also be used as a generic authoring system capable of supporting computer-based training (CBT) in other subject areas. The first section…

NHTSA data reference guide version 4. Volume 4, signal waveform generator tests

DOT National Transportation Integrated Search

1997-09-01

This guide documents the format of magnetic media (3.5 inch high density diskettes) to be submitted : to the National Highway Traffic Safety Administration (NHTSA) for SWG tests. This guide is : designated Volume IV. NHTSA Data Reference Guide (Signa...

Installing the Unix Starlink Software

NASA Astrophysics Data System (ADS)

Bly, M. J.

This note is the release note and installation instructions for the DEC Alpha AXP / Digital UNIX, Sun Sparc / Solaris v2.x, and Sun Sparc / SunOS 4.1.x versions of the Starlink Software Collection (USSC). You will be supplied with pre-built (and installed) versions on tape and will just need to copy the tape to disk to have a working version. The tapes (where appropriate) will contain in addition, copies of the NAG and MEMSYS libraries, and Tcl, Tk, Expect, Mosaic, TeX, Pine, Perl, Jed, Ispell, Ghostscript, LaXeX2html and Ftnchek for the relevant system. The Sun Sparc SunOS 4.1.x version of the USSC was frozen at USSC111 and no further updates are available. The instructions for installing the main section of the USSC may continue to be used for installing Sun Sparc SunOS 4.1.x version.

Epi info - present and future.

PubMed

Su, Y; Yoon, S S

2003-01-01

Epi Info is a suite of public domain computer programs for public health professionals developed by the Centers for Disease Control and Prevention (CDC). Epi Info is used for rapid questionnaire design, data entry and validation, data analysis including mapping and graphing, and creation of reports. Epi Info was originally created in 1985 using Turbo Pascal. In 1998, the last version of Epi Info for DOS, version 6, was released. Epi Info for DOS is currently supported by CDC but is no longer updated. The current version, Epi Info 2002, is Windows-based software developed using Microsoft Visual Basic. Approximately 300,000 downloads of Epi Info software occurred in 2002 from approximately 130 countries. These numbers make Epi Info probably one of the most widely distributed and used public domain programs in the world. The DOS version of Epi Info was translated into 13 languages, and efforts are underway to translate the Windows version into other major languages. Versions already exist for Spanish, French, Portuguese, Chinese, Japanese, and Arabic.

Software to model AXAF-I image quality

NASA Technical Reports Server (NTRS)

Ahmad, Anees; Feng, Chen

1995-01-01

A modular user-friendly computer program for the modeling of grazing-incidence type x-ray optical systems has been developed. This comprehensive computer software GRAZTRACE covers the manipulation of input data, ray tracing with reflectivity and surface deformation effects, convolution with x-ray source shape, and x-ray scattering. The program also includes the capabilities for image analysis, detector scan modeling, and graphical presentation of the results. A number of utilities have been developed to interface the predicted Advanced X-ray Astrophysics Facility-Imaging (AXAF-I) mirror structural and thermal distortions with the ray-trace. This software is written in FORTRAN 77 and runs on a SUN/SPARC station. An interactive command mode version and a batch mode version of the software have been developed.

U.S. Army weapon systems human-computer interface style guide. Version 2

DOE Office of Scientific and Technical Information (OSTI.GOV)

Avery, L.W.; O`Mara, P.A.; Shepard, A.P.

1997-12-31

A stated goal of the US Army has been the standardization of the human computer interfaces (HCIs) of its system. Some of the tools being used to accomplish this standardization are HCI design guidelines and style guides. Currently, the Army is employing a number of HCI design guidance documents. While these style guides provide good guidance for the command, control, communications, computers, and intelligence (C4I) domain, they do not necessarily represent the more unique requirements of the Army`s real time and near-real time (RT/NRT) weapon systems. The Office of the Director of Information for Command, Control, Communications, and Computers (DISC4),more » in conjunction with the Weapon Systems Technical Architecture Working Group (WSTAWG), recognized this need as part of their activities to revise the Army Technical Architecture (ATA), now termed the Joint Technical Architecture-Army (JTA-A). To address this need, DISC4 tasked the Pacific Northwest National Laboratory (PNNL) to develop an Army weapon systems unique HCI style guide, which resulted in the US Army Weapon Systems Human-Computer Interface (WSHCI) Style Guide Version 1. Based on feedback from the user community, DISC4 further tasked PNNL to revise Version 1 and publish Version 2. The intent was to update some of the research and incorporate some enhancements. This document provides that revision. The purpose of this document is to provide HCI design guidance for the RT/NRT Army system domain across the weapon systems subdomains of ground, aviation, missile, and soldier systems. Each subdomain should customize and extend this guidance by developing their domain-specific style guides, which will be used to guide the development of future systems within their subdomains.« less

HAL/S programmer's guide. [space shuttle flight software language

NASA Technical Reports Server (NTRS)

Newbold, P. M.; Hotz, R. L.

1974-01-01

HAL/S is a programming language developed to satisfy the flight software requirements for the space shuttle program. The user's guide explains pertinent language operating procedures and described the various HAL/S facilities for manipulating integer, scalar, vector, and matrix data types.

The image-guided surgery toolkit IGSTK: an open source C++ software toolkit.

PubMed

Enquobahrie, Andinet; Cheng, Patrick; Gary, Kevin; Ibanez, Luis; Gobbi, David; Lindseth, Frank; Yaniv, Ziv; Aylward, Stephen; Jomier, Julien; Cleary, Kevin

2007-11-01

This paper presents an overview of the image-guided surgery toolkit (IGSTK). IGSTK is an open source C++ software library that provides the basic components needed to develop image-guided surgery applications. It is intended for fast prototyping and development of image-guided surgery applications. The toolkit was developed through a collaboration between academic and industry partners. Because IGSTK was designed for safety-critical applications, the development team has adopted lightweight software processes that emphasizes safety and robustness while, at the same time, supporting geographically separated developers. A software process that is philosophically similar to agile software methods was adopted emphasizing iterative, incremental, and test-driven development principles. The guiding principle in the architecture design of IGSTK is patient safety. The IGSTK team implemented a component-based architecture and used state machine software design methodologies to improve the reliability and safety of the components. Every IGSTK component has a well-defined set of features that are governed by state machines. The state machine ensures that the component is always in a valid state and that all state transitions are valid and meaningful. Realizing that the continued success and viability of an open source toolkit depends on a strong user community, the IGSTK team is following several key strategies to build an active user community. These include maintaining a users and developers' mailing list, providing documentation (application programming interface reference document and book), presenting demonstration applications, and delivering tutorial sessions at relevant scientific conferences.

COSMIC monthly progress report

NASA Technical Reports Server (NTRS)

1993-01-01

Activities of the Computer Software Management and Information Center (COSMIC) are summarized for the month of August, 1993. Tables showing the current inventory of programs available from COSMIC are presented and program processing and evaluation activities are discussed. Ten articles were prepared for publication in the NASA Tech Brief Journal. These articles (included in this report) describe the following software items: (1) MOM3D - A Method of Moments Code for Electromagnetic Scattering (UNIX Version); (2) EM-Animate - Computer Program for Displaying and Animating the Steady-State Time-Harmonic Electromagnetic Near Field and Surface-Current Solutions; (3) MOM3D - A Method of Moments Code for Electromagnetic Scattering (IBM PC Version); (4) M414 - MIL-STD-414 Variable Sampling Procedures Computer Program; (5) MEDOF - Minimum Euclidean Distance Optimal Filter; (6) CLIPS 6.0 - C Language Integrated Production System, Version 6.0 (Macintosh Version); (7) CLIPS 6.0 - C Language Integrated Production System, Version 6.0 (IBM PC Version); (8) CLIPS 6.0 - C Language Integrated Production System, Version 6.0 (UNIX Version); (9) CLIPS 6.0 - C Language Integrated Production System, Version 6.0 (DEC VAX VMS Version); and (10) TFSSRA - Thick Frequency Selective Surface with Rectangular Apertures. Activities in the areas of marketing, customer service, benefits identification, maintenance and support, and dissemination are also described along with a budget summary.

In-Bore 3-T MR-guided Transrectal Targeted Prostate Biopsy: Prostate Imaging Reporting and Data System Version 2–based Diagnostic Performance for Detection of Prostate Cancer

PubMed Central

Tan, Nelly; Lin, Wei-Chan; Khoshnoodi, Pooria; Asvadi, Nazanin H.; Yoshida, Jeffrey; Margolis, Daniel J. A.; Lu, David S. K.; Wu, Holden; Lu, David Y.; Huang, Jaioti

2017-01-01

Purpose To determine the diagnostic yield of in-bore 3-T magnetic resonance (MR) imaging–guided prostate biopsy and stratify performance according to Prostate Imaging Reporting and Data System (PI-RADS) versions 1 and 2. Materials and Methods This study was HIPAA compliant and institution review board approved. In-bore 3-T MR-guided prostate biopsy was performed in 134 targets in 106 men who (a) had not previously undergone prostate biopsy, (b) had prior negative biopsy findings with increased prostate-specific antigen (PSA) level, or (c) had a prior history of prostate cancer with increasing PSA level. Clinical, diagnostic 3-T MR imaging was performed with in-bore guided prostate biopsy, and pathology data were collected. The diagnostic yields of MR-guided biopsy per patient and target were analyzed, and differences between biopsy targets with negative and positive findings were determined. Results of logistic regression and areas under the curve were compared between PI-RADS versions 1 and 2. Results Prostate cancer was detected in 63 of 106 patients (59.4%) and in 72 of 134 targets (53.7%) with 3-T MR imaging. Forty-nine of 72 targets (68.0%) had clinically significant cancer (Gleason score ≥ 7). One complication occurred (urosepsis, 0.9%). Patients who had positive target findings had lower apparent diffusion coefficient values (875 × 10−6 mm2/sec vs 1111 × 10−6 mm2/sec, respectively; P < .01), smaller prostate volume (47.2 cm3 vs 75.4 cm3, respectively; P < .01), higher PSA density (0.16 vs 0.10, respectively; P < .01), and higher proportion of PI-RADS version 2 category 3–5 scores when compared with patients with negative target findings. MR targets with PI-RADS version 2 category 2, 3, 4, and 5 scores had a positive diagnostic yield of three of 23 (13.0%), six of 31 (19.4%), 39 of 50 (78.0%), and 24 of 29 (82.8%) targets, respectively. No differences were detected in areas under the curve for PI-RADS version 2 versus 1. Conclusion In-bore 3-T MR-guided biopsy is safe and effective for prostate cancer diagnosis when stratified according to PI-RADS versions 1 and 2. ©RSNA, 2016 PMID:27861110

MODFLOW-2000, the U.S. Geological Survey modular ground-water model : user guide to the LMT6 package, the linkage with MT3DMS for multi-species mass transport modeling

USGS Publications Warehouse

Zheng, Chunmiao; Hill, Mary Catherine; Hsieh, Paul A.

2001-01-01

MODFLOW-2000, the newest version of MODFLOW, is a computer program that numerically solves the three-dimensional ground-water flow equation for a porous medium using a finite-difference method. MT3DMS, the successor to MT3D, is a computer program for modeling multi-species solute transport in three-dimensional ground-water systems using multiple solution techniques, including the finite-difference method, the method of characteristics (MOC), and the total-variation-diminishing (TVD) method. This report documents a new version of the Link-MT3DMS Package, which enables MODFLOW-2000 to produce the information needed by MT3DMS, and also discusses new visualization software for MT3DMS. Unlike the Link-MT3D Packages that coordinated previous versions of MODFLOW and MT3D, the new Link-MT3DMS Package requires an input file that, among other things, provides enhanced support for additional MODFLOW sink/source packages and allows list-directed (free) format for the flow model produced flow-transport link file. The report contains four parts: (a) documentation of the Link-MT3DMS Package Version 6 for MODFLOW-2000; (b) discussion of several issues related to simulation setup and input data preparation for running MT3DMS with MODFLOW-2000; (c) description of two test example problems, with comparison to results obtained using another MODFLOW-based transport program; and (d) overview of post-simulation visualization and animation using the U.S. Geological Survey?s Model Viewer.

AF-GEOSPACE Version 2.1

NASA Astrophysics Data System (ADS)

Hilmer, R. V.; Ginet, G. P.; Hall, T.; Holeman, E.; Madden, D.; Tautz, M.; Roth, C.

2004-05-01

AF-GEOSpace is a graphics-intensive software program with space environment models and applications developed and distributed by the Space Weather Center of Excellence at AFRL. A review of current (Version 2.0) and planned (Version 2.1) AF-GEOSpace capabilities will be given. A wide range of physical domains is represented enabling the software to address such things as solar disturbance propagation, radiation belt configuration, and ionospheric auroral particle precipitation and scintillation. The software is currently being used to aid with the design, operation, and simulation of a wide variety of communications, navigation, and surveillance systems. Building on the success of previous releases, AF-GEOSpace has become a platform for the rapid prototyping of automated operational and simulation space weather visualization products and helps with a variety of tasks, including: orbit specification for radiation hazard avoidance; satellite design assessment and post-event anomaly analysis; solar disturbance effects forecasting; frequency and antenna management for radar and HF communications; determination of link outage regions for active ionospheric conditions; scientific model validation and comparison, physics research, and education. Version 2.0 provided a simplified graphical user interface, improved science and application modules, and significantly enhanced graphical performance. Common input data archive sets, application modules, and 1-D, 2-D, and 3-D visualization tools are provided to all models. Dynamic capabilities permit multiple environments to be generated at user-specified time intervals while animation tools enable displays such as satellite orbits and environment data together as a function of time. Building on the existing Version 2.0 software architecture, AF-GEOSpace Version 2.1 is currently under development and will include a host of new modules to provide, for example, geosynchronous charged particle fluxes, neutral atmosphere densities, cosmic ray cutoff maps, low-altitude trapped proton belt specification, and meteor shower/storm fluxes with spacecraft impact probabilities. AF-GEOSpace Version 2.1 is being developed for Windows NT/2000/XP and Linux systems.

75 FR 16817 - Meeting for Software Developers on the Technical Specifications for Common Formats for Patient...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-04-02

... Software Developers on the Technical Specifications for Common Formats for Patient Safety Data Collection... software developers can provide input on these technical specifications for the Common Formats Version 1.1... specifications, which provide direction to software developers that plan to implement the Common Formats...

Shade matching assisted by digital photography and computer software.

PubMed

Schropp, Lars

2009-04-01

To evaluate the efficacy of digital photographs and graphic computer software for color matching compared to conventional visual matching. The shade of a tab from a shade guide (Vita 3D-Master Guide) placed in a phantom head was matched to a second guide of the same type by nine observers. This was done for twelve selected shade tabs (tests). The shade-matching procedure was performed visually in a simulated clinic environment and with digital photographs, and the time spent for both procedures was recorded. An alternative arrangement of the shade tabs was used in the digital photographs. In addition, a graphic software program was used for color analysis. Hue, chroma, and lightness values of the test tab and all tabs of the second guide were derived from the digital photographs. According to the CIE L*C*h* color system, the color differences between the test tab and tabs of the second guide were calculated. The shade guide tab that deviated least from the test tab was determined to be the match. Shade matching performance by means of graphic software was compared with the two visual methods and tested by Chi-square tests (alpha= 0.05). Eight of twelve test tabs (67%) were matched correctly by the computer software method. This was significantly better (p < 0.02) than the performance of the visual shade matching methods conducted in the simulated clinic (32% correct match) and with photographs (28% correct match). No correlation between time consumption for the visual shade matching methods and frequency of correct match was observed. Shade matching assisted by digital photographs and computer software was significantly more reliable than by conventional visual methods.

Conceptual Architecture for Obtaining Cyber Situational Awareness

DTIC Science & Technology

2014-06-01

1-893723-17-8. [10] SKYBOX SECURITY. Developer´s Guide. Skybox View. Manual.Version 11. 2010. [11] SCALABLE Network. EXata communications...E. Understanding command and control. Washington, D.C.: CCRP Publication Series, 2006. 255 p. ISBN 1-893723-17-8. • [10] SKYBOX SECURITY. Developer...s Guide. Skybox View. Manual.Version 11. 2010. • [11] SCALABLE Network. EXata communications simulation platform. Available: <http://www.scalable

CSMP Mathematics for the Upper Primary Grades Part II, Teacher's Guide [and] Worksheets. General Introduction. The World of Numbers. Final Experimental Version.

ERIC Educational Resources Information Center

Heidema, Clare; Schweitzer, Janis

This guide represents the final experimental version of a pilot project conducted in the United States between 1973 and 1976. The ideas and manner of presentation are based on the works of Georges and Frederique Papy. They are recognized as having introduced colored arrow drawings ("papygrams") and models of our numeration system (the…

CSMP Mathematics for the Intermediate Grades Part II, Teacher's Guide [and] Worksheets. The World of Numbers. Experimental Version.

ERIC Educational Resources Information Center

CEMREL, Inc., St. Ann, MO.

This guide represents the final experimental version of a pilot project which was conducted in the United States between 1973 and 1976. The ideas and the manner of presentation are based on the works of Georges and Frederique Papy. They are recognized for having introduced colored arrow drawings ("papygrams") and models of our numeration…

CSMP Mathematics for the Upper Primary Grades Part I, Teacher's Guide [and] Worksheets. General Introduction. The World of Numbers. Final Experimental Version.

ERIC Educational Resources Information Center

Heidema, Clare; Schweitzer, Janis

This guide represents the final experimental version of a pilot project conducted in the United States between 1973 and 1976. The ideas and manner of presentation are based on the works of Georges and Frederique Papy. They are recognized as having introduced colored arrow drawings ("papygrams") and models of our numeration system (the…

Design and Development of Basic Physical Layer WiMAX Network Simulation Models

DTIC Science & Technology

2009-01-01

Wide Web . The third software version was developed during the period of 22 August to 4 November, 2008. The software version developed during the...researched on the Web . The mathematics of some fundamental concepts such as Fourier transforms, convolutional coding techniques were also reviewed...Mathworks Matlab users’ website. A simulation model was found, entitled Estudio y Simulacion de la capa Jisica de la norma 802.16 ( Sistema WiMAX) developed

Benchmark Dose Software (BMDS) Development and ...

EPA Pesticide Factsheets

This report is intended to provide an overview of beta version 1.0 of the implementation of a model of repeated measures data referred to as the Toxicodiffusion model. The implementation described here represents the first steps towards integration of the Toxicodiffusion model into the EPA benchmark dose software (BMDS). This version runs from within BMDS 2.0 using an option screen for making model selection, as is done for other models in the BMDS 2.0 suite. This report is intended to provide an overview of beta version 1.0 of the implementation of a model of repeated measures data referred to as the Toxicodiffusion model.

Investigation of the Finite Element Software Packages at KSC

NASA Technical Reports Server (NTRS)

Lu, Chu-Ho

1991-01-01

The useful and powerful features of NASTRAN and three real world problems for the testing of the capabilities of different NASTRAN versions are discussed. The test problems involve direct transient analysis, nonlinear analysis, and static analysis. The experiences in using graphics software packages are also discussed. It was found that MSC/XL can be more useful if it can be improved to generate picture files of the analysis results and to extend its capabilities to support finite element codes other than MSC/NASTRAN. It was found that the current version of SDRC/I-DEAS (version VI) may have bugs in the module 'Data Loader'.

Virtually fabricated guide for placement of the C-tube miniplate.

PubMed

Paek, Janghyun; Jeong, Do-Min; Kim, Yong; Kim, Seong-Hun; Chung, Kyu-Rhim; Nelson, Gerald

2014-05-01

This paper introduces a virtually planned and stereolithographically fabricated guiding system that will allow the clinician to plan carefully for the best location of the device and to achieve an accurate position without complications. The scanned data from preoperative dental casts were edited to obtain preoperative 3-dimensional (3D) virtual models of the dentition. After the 3D virtual models were repositioned, the 3D virtual surgical guide was fabricated. A surgical guide was created onscreen, and then these virtual guides were materialized into real ones using the stereolithographic technique. Whereas the previously described guide required laboratory work to be performed by the orthodontist, our technique is more convenient because the laboratory work is done remotely by computer-aided design/computer-aided manufacturing technology. Because the miniplate is firmly held in place as the patient holds his or her mandibular teeth against the occlusal pad of the surgical guide, there is no risk that the miniscrews can slide on the bone surface during placement. The software program (2.5-dimensional software) in this study combines 2-dimensional cephalograms with 3D virtual dental models. This software is an effective and efficient alternative to 3D software when 3D computed tomography data are not available. To confidently and safely place a miniplate with screw fixation, a simple customized guide for an orthodontic miniplate was introduced. The use of a custom-made, rigid guide when placing miniplates will minimize complications such as vertical mislocation or slippage of the miniplate during placement. Copyright © 2014 American Association of Orthodontists. Published by Mosby, Inc. All rights reserved.

Real-time solar magnetograph operation system software design and user's guide

NASA Technical Reports Server (NTRS)

Wang, C.

1984-01-01

The Real Time Solar Magnetograph (RTSM) Operation system software design on PDP11/23+ is presented along with the User's Guide. The RTSM operation software is for real time instrumentation control, data collection and data management. The data is used for vector analysis, plotting or graphics display. The processed data is then easily compared with solar data from other sources, such as the Solar Maximum Mission (SMM).

A User's Guide to the Meta-Analysis of Research Studies. Meta-Stat: Software To Aid in the Meta-Analysis of Research Findings.

ERIC Educational Resources Information Center

Rudner, Lawrence M.; Glass Gene V.; Evartt, David L.; Emery, Patrick J.

This manual and the accompanying software are intended to provide a step-by-step guide to conducting a meta-analytic study along with references for further reading and free high-quality software, "Meta-Stat.""Meta-Stat" is a comprehensive package designed to help in the meta-analysis of research studies in the social and behavioral sciences.…

Simplifying applications software for vision guided robot implementation

NASA Technical Reports Server (NTRS)

Duncheon, Charlie

1994-01-01

A simple approach to robot applications software is described. The idea is to use commercially available software and hardware wherever possible to minimize system costs, schedules and risks. The U.S. has been slow in the adaptation of robots and flexible automation compared to the fluorishing growth of robot implementation in Japan. The U.S. can benefit from this approach because of a more flexible array of vision guided robot technologies.

Summary: Update to ASTM Guide E 1523 to Charge Control and Charge Referencing Techniques in X-ray Photoelectron Spectroscopy

DOE Office of Scientific and Technical Information (OSTI.GOV)

Baer, Donald R.

2005-04-22

An updated version of the ASTM guide E1523 to the methods to charge control and charge referencing techniques in x-ray photoelectron spectroscopy has been released by ASTM. The guide is meant to acquaint x-ray photoelectron spectroscopy (XPS) users with the various charge control and charge referencing techniques that are and have been used in the acquisition and interpretation of XPS data from surfaces of insulating specimens. The current guide has been expanded to include new references as well as recommendations for reporting information on charge control and charge referencing. The previous version of the document had been published in 1997.

Diet History Questionnaire: Suggested Citations

Cancer.gov

Use of the Diet History Questionnaire and Diet*Calc Analysis Software for publication purposes should contain a citation which includes version information for the software, questionnaire, and nutrient database.

CaveMan Enterprise version 1.0 Software Validation and Verification.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hart, David

The U.S. Department of Energy Strategic Petroleum Reserve stores crude oil in caverns solution-mined in salt domes along the Gulf Coast of Louisiana and Texas. The CaveMan software program has been used since the late 1990s as one tool to analyze pressure mea- surements monitored at each cavern. The purpose of this monitoring is to catch potential cavern integrity issues as soon as possible. The CaveMan software was written in Microsoft Visual Basic, and embedded in a Microsoft Excel workbook; this method of running the CaveMan software is no longer sustainable. As such, a new version called CaveMan Enter- prisemore » has been developed. CaveMan Enterprise version 1.0 does not have any changes to the CaveMan numerical models. CaveMan Enterprise represents, instead, a change from desktop-managed work- books to an enterprise framework, moving data management into coordinated databases and porting the numerical modeling codes into the Python programming language. This document provides a report of the code validation and verification testing.« less

49 CFR 236.903 - Definitions.

Code of Federal Regulations, 2011 CFR

2011-10-01

... electrical, mechanical, hardware, or software) that is part of a system or subsystem. Configuration..., including the hardware components and software version, is documented and maintained through the life-cycle... or compensates individuals to perform the duties specified in § 236.921 (a). Executive software means...

49 CFR 236.903 - Definitions.

Code of Federal Regulations, 2014 CFR

2014-10-01

... electrical, mechanical, hardware, or software) that is part of a system or subsystem. Configuration..., including the hardware components and software version, is documented and maintained through the life-cycle... or compensates individuals to perform the duties specified in § 236.921 (a). Executive software means...

49 CFR 236.903 - Definitions.

Code of Federal Regulations, 2012 CFR

2012-10-01

... electrical, mechanical, hardware, or software) that is part of a system or subsystem. Configuration..., including the hardware components and software version, is documented and maintained through the life-cycle... or compensates individuals to perform the duties specified in § 236.921 (a). Executive software means...

49 CFR 236.903 - Definitions.

Code of Federal Regulations, 2013 CFR

2013-10-01

... electrical, mechanical, hardware, or software) that is part of a system or subsystem. Configuration..., including the hardware components and software version, is documented and maintained through the life-cycle... or compensates individuals to perform the duties specified in § 236.921 (a). Executive software means...

Integrated Farm System Model Version 4.3 and Dairy Gas Emissions Model Version 3.3 Software development and distribution

USDA-ARS?s Scientific Manuscript database

Modeling routines of the Integrated Farm System Model (IFSM version 4.2) and Dairy Gas Emission Model (DairyGEM version 3.2), two whole-farm simulation models developed and maintained by USDA-ARS, were revised with new components for: (1) simulation of ammonia (NH3) and greenhouse gas emissions gene...

Heliport noise model (HNM) version 1 user's guide

DOT National Transportation Integrated Search

1988-02-01

This document contains the instructions to execute the Heliport Noise Model (HNM), Version 1. HNM Version 1 is a computer tool for determining the total impact of helicopter noise at and around heliports. The model runs on IBM PC/XT/AT personal compu...

Locating Biodiversity Data Through The Global Change Master Directory

NASA Technical Reports Server (NTRS)

Olsen, Lola M.

1998-01-01

The Global Change Master Directory (GCMD) presently holds descriptions for almost 7000 data sets held worldwide. The directory's primary purpose is for data discovery. The information provided through the GCMD's Directory Interchange Format (DIF) is the set of information that a researcher would need to determine if a particular data set could be of value. By offering data set descriptions worldwide in many scientific disciplines - including meteorology, oceanography, ecology, geology, hydrology, geophysics, remote sensing, paleoclimate, solar-terrestrial physics, and human dimensions of climate change - the GCMD simplifies the discovery of data sources. Direct linkages to many of the data sets are also provided. In addition, several data set registration tools are offered for populating the directory. To search the directory, one may choose the Guided Search or Free-Text Search. Two experimental interfaces were also made available with the latest software release - one based on a keyword search and another based on a graphical interface. The graphical interface was designed in collaboration with the Human Computer Interaction Laboratory at the University of Maryland. The latest version of the software, Version 6, was released in April, 1998. It features the implementation of a scheme to handle hierarchical data set collections (parent-child relationships); a hierarchical geospatial location search scheme; a Java-based geographic map for conducting geospatial searches; a Related-URL field for project-related data set collections, metadata extensions (such as more detailed inventory information), etc.; a new implementation of the Isite software; a new dataset language field; hyperlinked email addresses, and more. The key to the continued evolution of the GCMD is in the flexibility of the GCMD database, allowing modifications and additions to made relatively easily to maintain currency, thus providing the ability to capitalize on current technology while importing all existing records. Changes are discussed and approved through an online "interoperability" forum. The next major release of the GCMD is scheduled for early 1999 and will include the incorporation of a new matrix-based interface, a rapid valids-based query system; improvement in the operations facility - important for future distributed options; new streamlined code for greater performance and maintainability; improvements in the handling of seven current fields proposed through the interoperability forum (at no expense to the data providers); and the release of DOCmorph, a more robust version of DIFmorph to translate many 'standards' multi-directionally. Issues and actions will also be addressed.

A Descriptive Evaluation of Automated Software Cost-Estimation Models,

DTIC Science & Technology

1986-10-01

Version 1.03D) * PCOC (Version 7.01) - PRICE S • SLIM (Version 1.1) • SoftCost (Version 5. 1) * SPQR /20 (Version 1. 1) - WICOMO (Version 1.3) These...produce detailed GANTT and PERT charts. SPQR /20 is based on a cost model developed at ITT. In addition to cost, schedule, and staffing estimates, it...cases and test runs required, and the effectiveness of pre-test and test activities. SPQR /20 also predicts enhancement and maintenance activities. C

Web-Based Mapping Puts the World at Your Fingertips

NASA Technical Reports Server (NTRS)

2008-01-01

NASA's award-winning Earth Resources Laboratory Applications Software (ELAS) package was developed at Stennis Space Center. Since 1978, ELAS has been used worldwide for processing satellite and airborne sensor imagery data of the Earth's surface into readable and usable information. DATASTAR Inc., of Picayune, Mississippi, has used ELAS software in the DATASTAR Image Processing Exploitation (DIPEx) desktop and Internet image processing, analysis, and manipulation software. The new DIPEx Version III includes significant upgrades and improvements compared to its esteemed predecessor. A true World Wide Web application, this product evolved with worldwide geospatial dimensionality and numerous other improvements that seamlessly support the World Wide Web version.

QRev—Software for computation and quality assurance of acoustic doppler current profiler moving-boat streamflow measurements—Technical manual for version 2.8

USGS Publications Warehouse

Mueller, David S.

2016-06-21

The software program, QRev applies common and consistent computational algorithms combined with automated filtering and quality assessment of the data to improve the quality and efficiency of streamflow measurements and helps ensure that U.S. Geological Survey streamflow measurements are consistent, accurate, and independent of the manufacturer of the instrument used to make the measurement. Software from different manufacturers uses different algorithms for various aspects of the data processing and discharge computation. The algorithms used by QRev to filter data, interpolate data, and compute discharge are documented and compared to the algorithms used in the manufacturers’ software. QRev applies consistent algorithms and creates a data structure that is independent of the data source. QRev saves an extensible markup language (XML) file that can be imported into databases or electronic field notes software. This report is the technical manual for version 2.8 of QRev.

A theoretical basis for the analysis of multiversion software subject to coincident errors

NASA Technical Reports Server (NTRS)

Eckhardt, D. E., Jr.; Lee, L. D.

1985-01-01

Fundamental to the development of redundant software techniques (known as fault-tolerant software) is an understanding of the impact of multiple joint occurrences of errors, referred to here as coincident errors. A theoretical basis for the study of redundant software is developed which: (1) provides a probabilistic framework for empirically evaluating the effectiveness of a general multiversion strategy when component versions are subject to coincident errors, and (2) permits an analytical study of the effects of these errors. An intensity function, called the intensity of coincident errors, has a central role in this analysis. This function describes the propensity of programmers to introduce design faults in such a way that software components fail together when executing in the application environment. A condition under which a multiversion system is a better strategy than relying on a single version is given.

A software tool to automatically assure and report daily treatment deliveries by a cobalt‐60 radiation therapy device

PubMed Central

Wooten, H. Omar; Green, Olga; Li, Harold H.; Liu, Shi; Li, Xiaoling; Rodriguez, Vivian; Mutic, Sasa; Kashani, Rojano

2016-01-01

The aims of this study were to develop a method for automatic and immediate verification of treatment delivery after each treatment fraction in order to detect and correct errors, and to develop a comprehensive daily report which includes delivery verification results, daily image‐guided radiation therapy (IGRT) review, and information for weekly physics reviews. After systematically analyzing the requirements for treatment delivery verification and understanding the available information from a commercial MRI‐guided radiotherapy treatment machine, we designed a procedure to use 1) treatment plan files, 2) delivery log files, and 3) beam output information to verify the accuracy and completeness of each daily treatment delivery. The procedure verifies the correctness of delivered treatment plan parameters including beams, beam segments and, for each segment, the beam‐on time and MLC leaf positions. For each beam, composite primary fluence maps are calculated from the MLC leaf positions and segment beam‐on time. Error statistics are calculated on the fluence difference maps between the plan and the delivery. A daily treatment delivery report is designed to include all required information for IGRT and weekly physics reviews including the plan and treatment fraction information, daily beam output information, and the treatment delivery verification results. A computer program was developed to implement the proposed procedure of the automatic delivery verification and daily report generation for an MRI guided radiation therapy system. The program was clinically commissioned. Sensitivity was measured with simulated errors. The final version has been integrated into the commercial version of the treatment delivery system. The method automatically verifies the EBRT treatment deliveries and generates the daily treatment reports. Already in clinical use for over one year, it is useful to facilitate delivery error detection, and to expedite physician daily IGRT review and physicist weekly chart review. PACS number(s): 87.55.km PMID:27167269

OASIS: a data and software distribution service for Open Science Grid

NASA Astrophysics Data System (ADS)

Bockelman, B.; Caballero Bejar, J.; De Stefano, J.; Hover, J.; Quick, R.; Teige, S.

2014-06-01

The Open Science Grid encourages the concept of software portability: a user's scientific application should be able to run at as many sites as possible. It is necessary to provide a mechanism for OSG Virtual Organizations to install software at sites. Since its initial release, the OSG Compute Element has provided an application software installation directory to Virtual Organizations, where they can create their own sub-directory, install software into that sub-directory, and have the directory shared on the worker nodes at that site. The current model has shortcomings with regard to permissions, policies, versioning, and the lack of a unified, collective procedure or toolset for deploying software across all sites. Therefore, a new mechanism for data and software distributing is desirable. The architecture for the OSG Application Software Installation Service (OASIS) is a server-client model: the software and data are installed only once in a single place, and are automatically distributed to all client sites simultaneously. Central file distribution offers other advantages, including server-side authentication and authorization, activity records, quota management, data validation and inspection, and well-defined versioning and deletion policies. The architecture, as well as a complete analysis of the current implementation, will be described in this paper.

Flowing Valued Information and Cyber-Physical Situational Awareness

DTIC Science & Technology

2012-01-01

file type” constraints. The basic software supporting encryption and signing uses the OPENSSL software suite (the November 2009 version is...authorities for each organization can use OPENSSL software to generate their public and private keys. The MBTC does need to know the public or private

AutoGen Version 5.0

NASA Technical Reports Server (NTRS)

Gladden, Roy E.; Khanampornpan, Teerapat; Fisher, Forest W.

2010-01-01

Version 5.0 of the AutoGen software has been released. Previous versions, variously denoted Autogen and autogen, were reported in two articles: Automated Sequence Generation Process and Software (NPO-30746), Software Tech Briefs (Special Supplement to NASA Tech Briefs), September 2007, page 30, and Autogen Version 2.0 (NPO- 41501), NASA Tech Briefs, Vol. 31, No. 10 (October 2007), page 58. To recapitulate: AutoGen (now signifying automatic sequence generation ) automates the generation of sequences of commands in a standard format for uplink to spacecraft. AutoGen requires fewer workers than are needed for older manual sequence-generation processes, and greatly reduces sequence-generation times. The sequences are embodied in spacecraft activity sequence files (SASFs). AutoGen automates generation of SASFs by use of another previously reported program called APGEN. AutoGen encodes knowledge of different mission phases and of how the resultant commands must differ among the phases. AutoGen also provides means for customizing sequences through use of configuration files. The approach followed in developing AutoGen has involved encoding the behaviors of a system into a model and encoding algorithms for context-sensitive customizations of the modeled behaviors. This version of AutoGen addressed the MRO (Mars Reconnaissance Orbiter) primary science phase (PSP) mission phase. On previous Mars missions this phase has more commonly been referred to as mapping phase. This version addressed the unique aspects of sequencing orbital operations and specifically the mission specific adaptation of orbital operations for MRO. This version also includes capabilities for MRO s role in Mars relay support for UHF relay communications with the MER rovers and the Phoenix lander.

A Case Study in Flight Computer Software Redesign

NASA Astrophysics Data System (ADS)

Shimoni, R.; Ben-Zur, Y.

2004-06-01

Historically many real-time systems were developed using technologies that are now obsolete. There is a need for upgrading these systems. A good development process is essential to achieve a well-designed software product. We, at MLM, a subsidary of Israel Aircraft Industries, faced a similar situation in the Flight Mission Computer (Main Airborne Computer-MAC) of the SHAVIT launcher. It was necessary to upgrade the computer hardware and we decided to update the software as well. During the last two years, we have designed and implemented and new version of the MAC software, to be run on a new and stronger target platform. We undertook to create a new version of the MAC program using modern software development techniques. The process included Object-Oriented design using a CASE tool suitable for embedded real-time systems. We have partially implemented the ROPES development process. In this article we present the difficulties and challenges we faced in the software development process.

Distributed Visualization Project

NASA Technical Reports Server (NTRS)

Craig, Douglas; Conroy, Michael; Kickbusch, Tracey; Mazone, Rebecca

2016-01-01

Distributed Visualization allows anyone, anywhere to see any simulation at any time. Development focuses on algorithms, software, data formats, data systems and processes to enable sharing simulation-based information across temporal and spatial boundaries without requiring stakeholders to possess highly-specialized and very expensive display systems. It also introduces abstraction between the native and shared data, which allows teams to share results without giving away proprietary or sensitive data. The initial implementation of this capability is the Distributed Observer Network (DON) version 3.1. DON 3.1 is available for public release in the NASA Software Store (https://software.nasa.gov/software/KSC-13775) and works with version 3.0 of the Model Process Control specification (an XML Simulation Data Representation and Communication Language) to display complex graphical information and associated Meta-Data.

CSMP Mathematics for the Upper Primary Grades Part I, Teacher's Guide. The Languages of Strings and Arrows. Geometry and Measurement. Workbooks. Final Experimental Version.

ERIC Educational Resources Information Center

CEMREL, Inc., St. Ann, MO.

This guide represents the final experimental version of a pilot project conducted in the Unites States between 1973 and 1976. The ideas and manner of presentation are based on the works of Georges and Frederique Papy. They are recognized as having introduced colored arrow drawings ("papygrams") and models of our numeration system (the…

CSMP Mathematics for the Upper Primary Grades Part II, Teacher's Guide. The Languages of Strings and Arrows. Geometry and Measurement. Workbooks. Final Experimental Version.

ERIC Educational Resources Information Center

CEMREL, Inc., St. Ann, MO.

This guide represents the final experimental version of an extended pilot project which was conducted in the United States between 1973 and 1976. The manner of presentation and the pedagogical ideas and tools are based on the works of Georges and Frederique Papy. They are recognized as having introduced colored arrow drawings…

CSMP Mathematics for the Intermediate Grades Part II, Teacher's Guide. The Languages of Strings and Arrows. Geometry and Measurement. Probability and Statistics. Experimental Version.

ERIC Educational Resources Information Center

CEMREL, Inc., St. Ann, MO.

This guide represents the final experimental version of a pilot project which was conducted in the United States between 1973 and 1976. The ideas and the manner of presentation are based on the works of Georges and Frederique Papy. They are recognized for having introduced colored arrow drawings ("papygrams") and models of our numeration…

CSMP Mathematics for the Intermediate Grades Part III, Teacher's Guide. The Languages of Strings and Arrows. Geometry and Measurement. Probability and Statistics. Experimental Version.

ERIC Educational Resources Information Center

CEMREL, Inc., St. Ann, MO.

This guide represents the final experimental version of a pilot project which was conducted in the United States between 1973 and 1976. The ideas and the manner of presentation are based on the works of Georges and Frederique Papy. They are recognized for having introduced colored arrow drawings ("papygrams") and models of our numeration…

Reading Computer Programs: Instructor’s Guide to Exercises

DTIC Science & Technology

1990-08-01

activities that underlie effective writing, many of which are similar to those underlying software development . The module draws on related work in a number...Instructor’s Guide and Exercises Abstract: The ability to read and understand a computer program is a criti- cal skill for the software developer , yet this...skill is seldom developed in any systematic way in the education or training of software professionals. These materials discuss the importance of

PLUS: open-source toolkit for ultrasound-guided intervention systems.

PubMed

Lasso, Andras; Heffter, Tamas; Rankin, Adam; Pinter, Csaba; Ungi, Tamas; Fichtinger, Gabor

2014-10-01

A variety of advanced image analysis methods have been under the development for ultrasound-guided interventions. Unfortunately, the transition from an image analysis algorithm to clinical feasibility trials as part of an intervention system requires integration of many components, such as imaging and tracking devices, data processing algorithms, and visualization software. The objective of our paper is to provide a freely available open-source software platform-PLUS: Public software Library for Ultrasound-to facilitate rapid prototyping of ultrasound-guided intervention systems for translational clinical research. PLUS provides a variety of methods for interventional tool pose and ultrasound image acquisition from a wide range of tracking and imaging devices, spatial and temporal calibration, volume reconstruction, simulated image generation, and recording and live streaming of the acquired data. This paper introduces PLUS, explains its functionality and architecture, and presents typical uses and performance in ultrasound-guided intervention systems. PLUS fulfills the essential requirements for the development of ultrasound-guided intervention systems and it aspires to become a widely used translational research prototyping platform. PLUS is freely available as open source software under BSD license and can be downloaded from http://www.plustoolkit.org.

Using UML Modeling to Facilitate Three-Tier Architecture Projects in Software Engineering Courses

ERIC Educational Resources Information Center

Mitra, Sandeep

2014-01-01

This article presents the use of a model-centric approach to facilitate software development projects conforming to the three-tier architecture in undergraduate software engineering courses. Many instructors intend that such projects create software applications for use by real-world customers. While it is important that the first version of these…

Automatic Generation of Just-in-Time Online Assessments from Software Design Models

ERIC Educational Resources Information Center

Zualkernan, Imran A.; El-Naaj, Salim Abou; Papadopoulos, Maria; Al-Amoudi, Budoor K.; Matthews, Charles E.

2009-01-01

Computer software is pervasive in today's society. The rate at which new versions of computer software products are released is phenomenal when compared to the release rate of new products in traditional industries such as aircraft building. This rapid rate of change can partially explain why most certifications in the software industry are…

Finding Helpful Software Reviews.

ERIC Educational Resources Information Center

Kruse, Ted, Comp.

1987-01-01

Provides a list of evaluation services currently producing critical reviews of educational software. Includes information about The Apple K-12 Curriculum Software Reference, The Educational Software Preview, The Educational Software Selector, MicroSIFT, and Only The Best: The Discriminating Guide for Preschool-Grade 12. (TW)

Economic and Societal Factors Instructional Guide. Spanish Student Materials.

ERIC Educational Resources Information Center

Hendrix, Mary W.; And Others

This document is the Spanish language version of the student materials component designed to accompany the Economic and Societal Factors Instructional Guide. Page numbers are consistent with the numbering in that guide. The guide's nine units deal with the following topics: (1) job acquisition (sources of employment, job application, completing…

Hierarchy Software Development Framework (h-dp-fwk) project

NASA Astrophysics Data System (ADS)

Zaytsev, A.

2010-04-01

Hierarchy Software Development Framework provides a lightweight tool for building portable modular applications for performing automated data analysis tasks in a batch mode. The history of design and development activities devoted to the project has begun in March 2005 and from the very beginning it was targeting the case of building experimental data processing applications for the CMD-3 experiment which is being commissioned at Budker Institute of Nuclear Physics (BINP, Novosibirsk, Russia). Its design addresses the generic case of modular data processing application operating within the well defined distributed computing environment. The main features of the framework are modularity, built-in message and data exchange mechanisms, XInclude and XML schema enabled XML configuration management tools, dedicated log management tools, internal debugging tools, both dynamic and static module chains support, internal DSO version and consistency checking, well defined API for developing specialized frameworks. It is supported on Scientific Linux 4 and 5 and planned to be ported to other platforms as well. The project is provided with the comprehensive set of technical documentation and users' guides. The licensing schema for the source code, binaries and documentation implies that the product is free for non-commercial use. Although the development phase is not over and many features are to be implemented yet the project is considered ready for public use and creating applications in various fields including development of events reconstruction software for small and moderate scale HEP experiments.

Urine flow cytometry can rule out urinary tract infection, but cannot identify bacterial morphologies correctly.

PubMed

Geerts, N; Jansz, A R; Boonen, K J M; Wijn, R P W F; Koldewijn, E L; Boer, A K; Scharnhorst, V

2015-08-25

The diagnosis of urinary tract infection (UTI) by urine culture is a time-consuming and costly procedure. Usage of a screening method, to identify negative samples, would therefore affect time-to-diagnosis and laboratory cost positively. Urine flow cytometers are able to identify particles in urine. Together with the introduction of a cut-off value, which determines if a urine sample is subsequently cultured or not, the number of cultures can be reduced, while maintaining a low level of false negatives and a high negative predictive value. Recently, Sysmex developed additional software for their urine flow cytometers. Besides measuring the number of bacteria present in urine, information is given on bacterial morphology, which may guide the physician in the choice of antibiotic. In this study, we evaluated this software update. The UF1000i classifies bacteria into two categories: 'rods' and 'cocci/mixed'. Compared to the actual morphology of the bacterial pathogen found, the 'rods' category scores reasonably well with 91% chance of classifying rod-shaped bacteria correctly. The 'cocci/mixed' category underperforms, with only 29% of spherical-shaped bacteria (cocci) classified as such. In its current version, the bacterial morphology software does not classify bacteria, according to their morphology, well enough to be of clinical use in this study population. Copyright © 2015 Elsevier B.V. All rights reserved.

User's Guide for RESRAD-OFFSITE

DOE Office of Scientific and Technical Information (OSTI.GOV)

Gnanapragasam, E.; Yu, C.

2015-04-01

The RESRAD-OFFSITE code can be used to model the radiological dose or risk to an offsite receptor. This User’s Guide for RESRAD-OFFSITE Version 3.1 is an update of the User’s Guide for RESRAD-OFFSITE Version 2 contained in the Appendix A of the User’s Manual for RESRAD-OFFSITE Version 2 (ANL/EVS/TM/07-1, DOE/HS-0005, NUREG/CR-6937). This user’s guide presents the basic information necessary to use Version 3.1 of the code. It also points to the help file and other documents that provide more detailed information about the inputs, the input forms and features/tools in the code; two of the features (overriding the source termmore » and computing area factors) are discussed in the appendices to this guide. Section 2 describes how to download and install the code and then verify the installation of the code. Section 3 shows ways to navigate through the input screens to simulate various exposure scenarios and to view the results in graphics and text reports. Section 4 has screen shots of each input form in the code and provides basic information about each parameter to increase the user’s understanding of the code. Section 5 outlines the contents of all the text reports and the graphical output. It also describes the commands in the two output viewers. Section 6 deals with the probabilistic and sensitivity analysis tools available in the code. Section 7 details the various ways of obtaining help in the code.« less

Evaluator's Guide for Word Processing Software.

ERIC Educational Resources Information Center

Alberta Dept. of Education, Edmonton.

This guide provides a detailed evaluation form, together with complete instructions for using it, which is designed to elicit answers to the following questions: (1) What features and abilities does a specific word processing program have? (2) On which computer(s) will the program work? (3) Is additional hardware/software necessary before the…

Multi-version software reliability through fault-avoidance and fault-tolerance

NASA Technical Reports Server (NTRS)

Vouk, Mladen A.; Mcallister, David F.

1989-01-01

A number of experimental and theoretical issues associated with the practical use of multi-version software to provide run-time tolerance to software faults were investigated. A specialized tool was developed and evaluated for measuring testing coverage for a variety of metrics. The tool was used to collect information on the relationships between software faults and coverage provided by the testing process as measured by different metrics (including data flow metrics). Considerable correlation was found between coverage provided by some higher metrics and the elimination of faults in the code. Back-to-back testing was continued as an efficient mechanism for removal of un-correlated faults, and common-cause faults of variable span. Software reliability estimation methods was also continued based on non-random sampling, and the relationship between software reliability and code coverage provided through testing. New fault tolerance models were formulated. Simulation studies of the Acceptance Voting and Multi-stage Voting algorithms were finished and it was found that these two schemes for software fault tolerance are superior in many respects to some commonly used schemes. Particularly encouraging are the safety properties of the Acceptance testing scheme.

BOINC: compute for science

Science.gov Websites

. Permission is granted to copy, distribute and/or modify this document under the terms of the GNU Free Documentation License, Version 1.2 or any later version published by the Free Software Foundation.

Indoor Semi-volatile Organic Compounds (i-SVOC) Version 1.0

EPA Pesticide Factsheets

i-SVOC Version 1.0 is a general-purpose software application for dynamic modeling of the emission, transport, sorption, and distribution of semi-volatile organic compounds (SVOCs) in indoor environments.

RADS Version 4: An Efficient Way to Analyse the Multi-Mission Altimeter Database

NASA Astrophysics Data System (ADS)

Scharroo, Remko; Leuliette, Eric; Naeije, Marc; Martin-Puig, Cristina; Pires, Nelson

2016-08-01

The Radar Altimeter Database System (RADS) has grown to become a mature altimeter database. Over the last 18 years it is continuously being developed, first at Delft University of Technology, now also at the National Oceanic and Atmospheric Administration (NOAA) and the European Organisation for the Exploitation of Meteorological Satellites (EUMETSAT).RADS now serves as a fundamental Climate Data Record for sea level. Because of the multiple users involved in vetting the data and the regular updates to the database, RADS is one of the most accurate and complete databases of satellite altimeter data around.RADS version 4 is a major change from the previous version. While the database is compatible with both software versions, the new software provides new tools, allows easier expansion, and has a better and more standardised interface.

GEOSTATISTICS FOR WASTE MANAGEMENT: A USER'S MANUAL FOR THE GEOPACK (VERSION 1.0) GEOSTATISTICAL SOFTWARE SYSTEM

EPA Science Inventory

GEOPACK, a comprehensive user-friendly geostatistical software system, was developed to help in the analysis of spatially correlated data. The software system was developed to be used by scientists, engineers, regulators, etc., with little experience in geostatistical techniques...

Iowa Bridge Backwater Software : users manual IHRB TR-564, version 2.0, June 2010.

DOT National Transportation Integrated Search

2010-06-01

This manual describes how to use the Iowa Bridge Backwater software. It also documents the methods and equations used for the calculations. The main body describes how to use the software and the appendices cover technical aspects. : The Bridge Backw...

15 CFR Supplement No. 6 to Part 742 - Technical Questionnaire for Encryption Items

Code of Federal Regulations, 2012 CFR

2012-01-01

... software, provide the following information: (1) Description of all the symmetric and asymmetric encryption... third-party hardware or software encryption components (if any). Identify the manufacturers of the hardware or software components, including specific part numbers and version information as needed to...

15 CFR Supplement No. 6 to Part 742 - Technical Questionnaire for Encryption Items

Code of Federal Regulations, 2013 CFR

2013-01-01

... software, provide the following information: (1) Description of all the symmetric and asymmetric encryption... third-party hardware or software encryption components (if any). Identify the manufacturers of the hardware or software components, including specific part numbers and version information as needed to...

15 CFR Supplement No. 6 to Part 742 - Technical Questionnaire for Encryption Items

Code of Federal Regulations, 2014 CFR

2014-01-01

... software, provide the following information: (1) Description of all the symmetric and asymmetric encryption... third-party hardware or software encryption components (if any). Identify the manufacturers of the hardware or software components, including specific part numbers and version information as needed to...

MueLu User's Guid for Trilinos Version 11.12.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hu, Jonathan Joseph; Prokopenko, Andrey; Wiesner, Tobias A.

This is the official user guide for the M UE L U multigrid library in Trilinos version 11.12. This guide provides an overview of M UE L U , its capabilities, and instructions for new users who want to start using M UE L U with a minimum of effort. Detailed information is given on how to drive M UE L U through its XML interface. Links to more advanced use cases are given. This guide gives information on how to achieve good parallel performance, as well as how to introduce new algorithms. Finally, readers will find a comprehensive listingmore » of available M UE L U options. Any options not documented in this manual should be considered strictly experimental.« less

A User''s Guide to the Zwikker-Kosten Transmission Line Code (ZKTL)

NASA Technical Reports Server (NTRS)

Kelly, J. J.; Abu-Khajeel, H.

1997-01-01

This user's guide documents updates to the Zwikker-Kosten Transmission Line Code (ZKTL). This code was developed for analyzing new liner concepts developed to provide increased sound absorption. Contiguous arrays of multi-degree-of-freedom (MDOF) liner elements serve as the model for these liner configurations, and Zwikker and Kosten's theory of sound propagation in channels is used to predict the surface impedance. Transmission matrices for the various liner elements incorporate both analytical and semi-empirical methods. This allows standard matrix techniques to be employed in the code to systematically calculate the composite impedance due to the individual liner elements. The ZKTL code consists of four independent subroutines: 1. Single channel impedance calculation - linear version (SCIC) 2. Single channel impedance calculation - nonlinear version (SCICNL) 3. Multi-channel, multi-segment, multi-layer impedance calculation - linear version (MCMSML) 4. Multi-channel, multi-segment, multi-layer impedance calculation - nonlinear version (MCMSMLNL) Detailed examples, comments, and explanations for each liner impedance computation module are included. Also contained in the guide are depictions of the interactive execution, input files and output files.

[An Introduction to A Newly-developed "Acupuncture Needle Manipulation Training-evaluation System" Based on Optical Motion Capture Technique].

PubMed

Zhang, Ao; Yan, Xing-Ke; Liu, An-Guo

2016-12-25

In the present paper, the authors introduce a newly-developed "Acupuncture Needle Manipulation Training-evaluation System" based on optical motion capture technique. It is composed of two parts, sensor and software, and overcomes some shortages of mechanical motion capture technique. This device is able to analyze the data of operations of the pressing-hand and needle-insertion hand during acupuncture performance and its software contains personal computer (PC) version, Android version, and Internetwork Operating System (IOS) Apple version. It is competent in recording and analyzing information of any ope-rator's needling manipulations, and is quite helpful for teachers in teaching, training and examining students in clinical practice.

Biological Science: An Ecological Approach. BSCS Green Version. Teacher's Edition. Sixth Edition.

ERIC Educational Resources Information Center

Biological Sciences Curriculum Study, Colorado Springs.

This book is the teacher's edition to the 1987 edition of the Biological Sciences Curriculum Study Green Version textbook. It contains directions for teaching with this version, a description of the accompanying materials, teaching strategies by chapters, lists of useful software, safety guidelines, a materials list, chemical safety information,…

NHTSA data reference guide version 4. Volume 1, vehicle tests

DOT National Transportation Integrated Search

1997-04-01

This guide documents the format of magnetic media (3.5 inch high density diskettes) to be submitted : to the National Highway Traffic Safety Administration (NHTSA) for vehicle crash tests. This guide is : designated Volume I. NHTSA Data Reference Gui...

Guide to data collection

NASA Technical Reports Server (NTRS)

1981-01-01

Guidelines and recommendations are presented for the collection of software development data. Motivation and planning for, and implementation and management of, a data collection effort are discussed. Topics covered include types, sources, and availability of data; methods and costs of data collection; types of analyses supported; and warnings and suggestions based on software engineering laboratory (SEL) experiences. This document is intended as a practical guide for software managers and engineers, abstracted and generalized from 5 years of SEL data collection.

Technology Transfer Policy Applied to the U.S. Army Military History Institute Collection.

DTIC Science & Technology

1998-04-15

from the OSHA GUIDE data files. Computer software does not include computer database or computer software documentation. 1.10 "COMPUTER SOFTWARE...advising all current or future users of the OSHA GUIDE of its availability through XYZ COMPANY 32 CBks Memo 870-2 Appendix E Terms Cooperative... Malaysia No. PI920163 Mexico No. 925240 Philippines No. 44927 PCT US92/07556 Australia No. 26447/92 Canada No. 2,119,006 Czech Republic No. PV

Figures of Merit Software: Description, User's Guide, Installation Notes, Versions Description, and License Agreement

NASA Technical Reports Server (NTRS)

hoelzer, H. D.; Fourroux, K. A.; Rickman, D. L.; Schrader, C. M.

2011-01-01

Figures of Merit (FoMs) and the FoM software provide a method for quantitatively evaluating the quality of a regolith simulant by comparing the simulant to a reference material. FoMs may be used for comparing a simulant to actual regolith material, specification by stating the value a simulant s FoMs must attain to be suitable for a given application and comparing simulants from different vendors or production runs. FoMs may even be used to compare different simulants to each other. A single FoM is conceptually an algorithm that computes a single number for quantifying the similarity or difference of a single characteristic of a simulant material and a reference material and provides a clear measure of how well a simulant and reference material match or compare. FoMs have been constructed to lie between zero and 1, with zero indicating a poor or no match and 1 indicating a perfect match. FoMs are defined for modal composition, particle size distribution, particle shape distribution, (aspect ratio and angularity), and density. This TM covers the mathematics, use, installation, and licensing for the existing FoM code in detail.

Method of Characteristic (MOC) Nozzle Flowfield Solver - User’s Guide and Input Manual Version 2.0

DTIC Science & Technology

2018-01-01

TECHNICAL REPORT RDMR-SS-17-13 METHOD OF CHARACTERISTIC (MOC) NOZZLE FLOWFIELD SOLVER—USER’S GUIDE AND INPUT MANUAL VERSION 2.0 Kevin D. Kennedy...System Simulation and Development Directorate Aviation and Missile Research , Development, and Engineering Center January 2018 Distribution Statement...DOCUMENTS, DESTROY BY ANY METHOD THAT WILL PREVENT DISCLOSURE OF CONTENTS OR RECONSTRUCTION OF THE DOCUMENT. DISCLAIMER THE FINDINGS IN THIS REPORT

COSMIC monthly progress report

NASA Technical Reports Server (NTRS)

1994-01-01

Activities of the Computer Software Management and Information Center (COSMIC) are summarized for the month of May 1994. Tables showing the current inventory of programs available from COSMIC are presented and program processing and evaluation activities are summarized. Nine articles were prepared for publication in the NASA Tech Brief Journal. These articles (included in this report) describe the following software items: (1) WFI - Windowing System for Test and Simulation; (2) HZETRN - A Free Space Radiation Transport and Shielding Program; (3) COMGEN-BEM - Composite Model Generation-Boundary Element Method; (4) IDDS - Interactive Data Display System; (5) CET93/PC - Chemical Equilibrium with Transport Properties, 1993; (6) SDVIC - Sub-pixel Digital Video Image Correlation; (7) TRASYS - Thermal Radiation Analyzer System (HP9000 Series 700/800 Version without NASADIG); (8) NASADIG - NASA Device Independent Graphics Library, Version 6.0 (VAX VMS Version); and (9) NASADIG - NASA Device Independent Graphics Library, Version 6.0 (UNIX Version). Activities in the areas of marketing, customer service, benefits identification, maintenance and support, and dissemination are also described along with a budget summary.

The combination of digital surface scanners and cone beam computed tomography technology for guided implant surgery using 3Shape implant studio software: a case history report.

PubMed

Lanis, Alejandro; Álvarez Del Canto, Orlando

2015-01-01

The incorporation of virtual engineering into dentistry and the digitization of information are providing new perspectives and innovative alternatives for dental treatment modalities. The use of digital surface scanners with surgical planning software allows for the combination of the radiographic, prosthetic, surgical, and laboratory fields under a common virtual scenario, permitting complete digital treatment planning. In this article, the authors present a clinical case in which a guided implant surgery was performed based on a complete digital surgical plan combining the information from a cone beam computed tomography scan and the virtual simulation obtained from the 3Shape TRIOS intraoral surface scanner. The information was imported to and combined in the 3Shape Implant Studio software for guided implant surgery planning. A surgical guide was obtained by a 3D printer, and the surgical procedure was done using the Biohorizons Guided Surgery Kit and its protocol.

[Guided and computer-assisted implant surgery and prosthetic: The continuous digital workflow].

PubMed

Pascual, D; Vaysse, J

2016-02-01

New continuous digital workflow protocols of guided and computer-assisted implant surgery improve accuracy of implant positioning. The design of the future prosthesis is based on the available prosthetic space, gingival height and occlusal relationship with the opposing and adjacent teeth. The implant position and length depend on volume, density and bone quality, gingival height, tooth-implant and implant-implant distances, implant parallelism, axis and type of the future prosthesis. The crown modeled on the software will therefore serve as a guide to the future implant axis and not the reverse. The guide is made by 3D printing. The software determines surgical protocol with the drilling sequences. The unitary or plural prosthesis, modeled on the software and built before surgery, is loaded directly after implant placing, if needed. These protocols allow for a full continuity of the digital workflow. The software provides the surgeon and the dental technician a total freedom for the prosthetic-surgery guide design and the position of the implants. The prosthetic project, occlusal and aesthetic, taking the bony and surgical constraints into account, is optimized. The implant surgery is simplified and becomes less "stressful" for the patient and the surgeon. Guided and computer-assisted surgery with continuous digital workflow is becoming the technique of choice to improve the accuracy and quality of implant rehabilitation. Copyright © 2015 Elsevier Masson SAS. All rights reserved.

GEOSTATISTICS FOR WASTE MANAGEMENT: A USER'S MANUEL FOR THE GEOPACK (VERSION 1.0) GEOSTATISTICAL SOFTWARE SYSTEM

EPA Science Inventory

A comprehensive, user-friendly geostatistical software system called GEOPACk has been developed. The purpose of this software is to make available the programs necessary to undertake a geostatistical analysis of spatially correlated data. The programs were written so that they ...

Supporting Source Code Comprehension during Software Evolution and Maintenance

ERIC Educational Resources Information Center

Alhindawi, Nouh

2013-01-01

This dissertation addresses the problems of program comprehension to support the evolution of large-scale software systems. The research concerns how software engineers locate features and concepts along with categorizing changes within very large bodies of source code along with their versioned histories. More specifically, advanced Information…

The UCLA Design Diversity Experiment (DEDIX) system: A distributed testbed for multiple-version software

NASA Technical Reports Server (NTRS)

Avizienis, A.; Gunningberg, P.; Kelly, J. P. J.; Strigini, L.; Traverse, P. J.; Tso, K. S.; Voges, U.

1986-01-01

To establish a long-term research facility for experimental investigations of design diversity as a means of achieving fault-tolerant systems, a distributed testbed for multiple-version software was designed. It is part of a local network, which utilizes the Locus distributed operating system to operate a set of 20 VAX 11/750 computers. It is used in experiments to measure the efficacy of design diversity and to investigate reliability increases under large-scale, controlled experimental conditions.

Software Classifications: Trends in Literacy Software Publication and Marketing.

ERIC Educational Resources Information Center

Balajthy, Ernest

First in a continuing series of reports on trends in marketing and publication of software for literacy education, a study explored the development of a database to track the trends and reported on trends seen in 1995. The final version of the 1995 database consisted of 1011 software titles, 165 of which had been published in 1995 and 846…

ProUCL version 4.1.00 Documentation Downloads

EPA Pesticide Factsheets

ProUCL version 4.1.00 represents a comprehensive statistical software package equipped with statistical methods and graphical tools needed to address many environmental sampling and statistical issues as described in various these guidance documents.

Annotated bibliography of software engineering laboratory literature

NASA Technical Reports Server (NTRS)

Buhler, Melanie; Valett, Jon

1989-01-01

An annotated bibliography is presented of technical papers, documents, and memorandums produced by or related to the Software Engineering Laboratory. The bibliography was updated and reorganized substantially since the original version (SEL-82-006, November 1982). All materials were grouped into eight general subject areas for easy reference: (1) The Software Engineering Laboratory; (2) The Software Engineering Laboratory: Software Development Documents; (3) Software Tools; (4) Software Models; (5) Software Measurement; (6) Technology Evaluations; (7) Ada Technology; and (8) Data Collection. Subject and author indexes further classify these documents by specific topic and individual author.

Key Questions in Building Defect Prediction Models in Practice

NASA Astrophysics Data System (ADS)

Ramler, Rudolf; Wolfmaier, Klaus; Stauder, Erwin; Kossak, Felix; Natschläger, Thomas

The information about which modules of a future version of a software system are defect-prone is a valuable planning aid for quality managers and testers. Defect prediction promises to indicate these defect-prone modules. However, constructing effective defect prediction models in an industrial setting involves a number of key questions. In this paper we discuss ten key questions identified in context of establishing defect prediction in a large software development project. Seven consecutive versions of the software system have been used to construct and validate defect prediction models for system test planning. Furthermore, the paper presents initial empirical results from the studied project and, by this means, contributes answers to the identified questions.

Guiding the process of health technology disinvestment.

PubMed

Ibargoyen-Roteta, Nora; Gutiérrez-Ibarluzea, Iñaki; Asua, José

2010-12-01

To develop a guideline for health technology disinvestment. The Nominal Group Technique was used to determine relevant aspects of disinvestment decision-making. Ideas reaching consensus and previous Spanish guidelines on the acquisition of new health technologies (GANT) and new genetic tests (GEN) structures were used to develop the domains and contents of GuNFT (Guideline for Not Funding Health Technologies). The draft was peer reviewed by local and international experts and their suggestions were incorporated to the first GuNFT version. Thirty-five ideas reached consensus. The most relevant ones referred to the reasons for disinvesting in a technology and the key aspects that would facilitate disinvestment acceptance. Considering both consensus ideas and GANT and GEN guidelines, the first GuNFT draft was elaborated. After the review process, section numbers and contents were changed. The resulting GuNFT guideline was finally divided into six domains related to: (1) general preliminary recommendations, (2) completing the application form, (3) checking and prioritising applications, (4) assessment, (5) final decision and (6) action plan design. A software was also developed to facilitate GuNFT implementation. Disinvestment should be a guided process. Accordingly, we present the first guideline for that purpose. Copyright © 2010 Elsevier Ireland Ltd. All rights reserved.

Ground crewmen help guide the alignment of the X-40A as the experimental craft is gently lowered to

NASA Technical Reports Server (NTRS)

2000-01-01

Ground crewmen help guide the alignment of the X-40 technology demonstrator as the experimental craft is gently lowered to the ground by a U.S. Army CH-47 Chinook cargo helicopter following a captive-carry test flight at NASA's Dryden Flight Research Center, Edwards, California. The X-40 is an unpowered 82 percent scale version of the X-37, a Boeing-developed spaceplane designed to demonstrate various advanced technologies for development of future lower-cost access to space vehicles. The X-37 will be carried into space aboard a space shuttle and then released to perform various maneuvers and a controlled re-entry through the Earth's atmosphere to an airplane-style landing on a runway, controlled entirely by pre-programmed computer software. Following a series of captive-carry flights, the X-40 made several free flights from a launch altitude of about 15,000 feet above ground, gliding to a fully autonomous landing. The captive carry flights helped verify the X-40's navigation and control systems, rigging angles for its sling, and stability and control of the helicopter while carrying the X-40 on a tether.

The Software Jungle: To Guide or Not To Guide.

ERIC Educational Resources Information Center

Stigleman, Sue E.

This report describes a project which evaluated five IBM and Macintosh bibliographic formatting software programs--ProCite, Sci-Mate, Reference Manager, Notebook II, and Bibliography--and which was conducted by the Health Sciences Library at the University of North Carolina at Chapel Hill at the request of the campus microcomputer support center.…

Ed Tech Developer's Guide: A Primer for Software Developers, Startups, and Entrepreneurs

ERIC Educational Resources Information Center

Bienkowski, Marie; Gerard, Sarah Nixon; Rubin, Shawn; Sanford, Cathy; Borrelli-Murray, Dana; Driscoll, Tom; Arora, Jessie; Hruska, Mike; Beck, Katie; Murray, Thomas; Hoekstra, Jason; Gannes, Stuart; Metz, Edward; Midgley, Steve; Castilla, Stephanie; Tomassini, Jason; Madda, Mary Jo; Chase, Zac; Martin, Erik; Noel, Marcus; Styles, Kathleen

2015-01-01

Opportunities abound for software designers and developers to create impactful tools for teachers, school leaders, students, and their families. This guide for developers, startups, and entrepreneurs addresses key questions about the education ecosystem and highlights critical needs and opportunities to develop digital tools and apps for learning.…

Designing Better Camels: Developing Effective Documentation for Computer Software.

ERIC Educational Resources Information Center

Zacher, Candace M.

This guide to the development of effective documentation for users of computer software begins by identifying five types of documentation, i.e., training manuals, user guides, tutorials, on-screen help comments, and troubleshooting manuals. Six steps in the development process are then outlined and briefly described: (1) planning and preparation;…

A Constrained and Guided Approach for Managing Software Engineering Course Projects

ERIC Educational Resources Information Center

Cheng, Y.-P.; Lin, J. M.-C.

2010-01-01

This paper documents several years of experimentation with a new approach to organizing and managing projects in a software engineering course. The initial failure and subsequent refinements that the new approach has been through since 2004 are described herein. The "constrained and guided" approach, as it is called, has helped to reduce…

Hardwood log defect photographic database, software and user's guide

Treesearch

R. Edward Thomas

2009-01-01

Computer software and user's guide for Hardwood Log Defect Photographic Database. The database contains photographs and information on external hardwood log defects and the corresponding internal characteristics. This database allows users to search for specific defect types, sizes, and locations by tree species. For every defect, the database contains photos of...

NHTSA data reference guide version 4.b. Volume 2, biomechanical tests

DOT National Transportation Integrated Search

1999-05-01

This guide documents the format of media (3.5 inch high density diskettes or CD-ROMs) to : be submitted to the National Highway Traffic Safety Administration (NHTSA) for : biomechanical tests. This guide is designated Volume II. NHTSA Data Reference ...

Software Engineering Laboratory (SEL) data base reporting software user's guide and system description. Volume 2: Program descriptions

NASA Technical Reports Server (NTRS)

1983-01-01

The structure and functions of each reporting software program for the Software Engineering Laboratory data base are described. Baseline diagrams, module descriptions, and listings of program generation files are included.

77 FR 50722 - Software Unit Testing for Digital Computer Software Used in Safety Systems of Nuclear Power Plants

Federal Register 2010, 2011, 2012, 2013, 2014

2012-08-22

... NUCLEAR REGULATORY COMMISSION [NRC-2012-0195] Software Unit Testing for Digital Computer Software...) is issuing for public comment draft regulatory guide (DG), DG-1208, ``Software Unit Testing for Digital Computer Software used in Safety Systems of Nuclear Power Plants.'' The DG-1208 is proposed...

78 FR 47011 - Software Unit Testing for Digital Computer Software Used in Safety Systems of Nuclear Power Plants

Federal Register 2010, 2011, 2012, 2013, 2014

2013-08-02

... NUCLEAR REGULATORY COMMISSION [NRC-2012-0195] Software Unit Testing for Digital Computer Software... revised regulatory guide (RG), revision 1 of RG 1.171, ``Software Unit Testing for Digital Computer Software Used in Safety Systems of Nuclear Power Plants.'' This RG endorses American National Standards...

AF-GEOSpace Version 2.1 Release

NASA Astrophysics Data System (ADS)

Hilmer, R. V.; Ginet, G. P.; Hall, T.; Holeman, E.; Madden, D.; Perry, K. L.; Tautz, M.; Roth, C.

2006-05-01

AF-GEOSpace Version 2.1 is a graphics-intensive software program with space environment models and applications developed recently by the Space Weather Center of Excellence at AFRL. A review of new and planned AF-GEOSpace capabilities will be given. The software addresses a wide range of physical domains and addresses such topics as solar disturbance propagation, geomagnetic field and radiation belt configurations, auroral particle precipitation, and ionospheric scintillation. Building on the success of previous releases, AF-GEOSpace has become a platform for the rapid prototyping of automated operational and simulation space weather visualization products and helps with a variety of tasks, including: orbit specification for radiation hazard avoidance; satellite design assessment and post-event anomaly analysis; solar disturbance effects forecasting; determination of link outage regions for active ionospheric conditions; satellite magnetic conjugate studies, scientific model validation and comparison, physics research, and education. Previously, Version 2.0 provided a simplified graphical user interface, improved science and application modules, significantly enhanced graphical performance, common input data archive sets, and 1-D, 2-D, and 3- D visualization tools for all models. Dynamic capabilities permit multiple environments to be generated at user- specified time intervals while animation tools enable the display of satellite orbits and environment data together as a function of time. Building on the Version 2.0 software architecture, AF-GEOSpace Version 2.1 includes a host of new modules providing, for example, plasma sheet charged particle fluxes, neutral atmosphere densities, 3-D cosmic ray cutoff maps, low-altitude trapped proton belt flux specification, DMSP particle data displays, satellite magnetic field footprint mapping determination, and meteor sky maps and shower/storm fluxes with spacecraft impact probabilities. AF-GEOSpace Version 2.1 was developed for Windows XP and Linux systems. To receive a copy of the AF-GEOSpace 2.1 software, please submit requests via e-mail to the first author.

Preparation of cherry-picked combinatorial libraries by string synthesis.

PubMed

Furka, Arpád; Dibó, Gábor; Gombosuren, Naran

2005-03-01

String synthesis [1-3] is an efficient and cheap manual method for preparation of combinatorial libraries by using macroscopic solid support units. Sorting the units between two synthetic steps is an important operation of the procedure. The software developed to guide sorting can be used only when complete combinatorial libraries are prepared. Since very often only selected components of the full libraries are needed, new software was constructed that guides sorting in preparation of non-complete combinatorial libraries. Application of the software is described in details.

Provider software buyer's guide.

PubMed

1994-03-01

To help long term care providers find new ways to improve quality of care and efficiency, Provider magazine presents the fourth annual listing of software firms marketing computer programs for all areas of nursing facility operations. On the following five pages, more than 80 software firms display their wares, with programs such as minimum data set and care planning, dietary, accounting and financials, case mix, and medication administration records. The guide also charts compatible hardware, integration ability, telephone numbers, company contacts, and easy-to-use reader service numbers.

5th Annual Provider Software Buyer's Guide.

PubMed

1995-03-01

To help long term care providers find new ways to improve quality of care and efficiency, PROVIDER presents the fifth annual listing of software firms marketing computer programs for all areas of long term care operations. On the following five pages, more than 70 software firms display their wares, with programs such as minimum data set and care planning, dietary, accounting and financials, case mix, and medication administration records. The guide also charts compatible hardware, integration ability, telephone numbers, company contacts, and easy-to-use reader service numbers.

Provider software buyer's guide.

PubMed

1993-03-01

To help long term care providers find new ways to improve quality of care and efficiency. Provider magazine presents the third annual listing of software firms marketing computer programs for all areas of nursing facility operations. On the following five pages, more than 80 software firms display their wares, with programs such as minimum data set and care planning, dietary, accounting and financials, case mix, and medication administration records. The guide also charts compatible hardware, integration ability, telephone numbers, company contacts, and easy-to-use reader service numbers.

Tough2{_}MP: A parallel version of TOUGH2

DOE Office of Scientific and Technical Information (OSTI.GOV)

Zhang, Keni; Wu, Yu-Shu; Ding, Chris

2003-04-09

TOUGH2{_}MP is a massively parallel version of TOUGH2. It was developed for running on distributed-memory parallel computers to simulate large simulation problems that may not be solved by the standard, single-CPU TOUGH2 code. The new code implements an efficient massively parallel scheme, while preserving the full capacity and flexibility of the original TOUGH2 code. The new software uses the METIS software package for grid partitioning and AZTEC software package for linear-equation solving. The standard message-passing interface is adopted for communication among processors. Numerical performance of the current version code has been tested on CRAY-T3E and IBM RS/6000 SP platforms. Inmore » addition, the parallel code has been successfully applied to real field problems of multi-million-cell simulations for three-dimensional multiphase and multicomponent fluid and heat flow, as well as solute transport. In this paper, we will review the development of the TOUGH2{_}MP, and discuss the basic features, modules, and their applications.« less

Primer3_masker: integrating masking of template sequence with primer design software.

PubMed

Kõressaar, Triinu; Lepamets, Maarja; Kaplinski, Lauris; Raime, Kairi; Andreson, Reidar; Remm, Maido

2018-06-01

Designing PCR primers for amplifying regions of eukaryotic genomes is a complicated task because the genomes contain a large number of repeat sequences and other regions unsuitable for amplification by PCR. We have developed a novel k-mer based masking method that uses a statistical model to detect and mask failure-prone regions on the DNA template prior to primer design. We implemented the software as a standalone software primer3_masker and integrated it into the primer design program Primer3. The standalone version of primer3_masker is implemented in C. The source code is freely available at https://github.com/bioinfo-ut/primer3_masker/ (standalone version for Linux and macOS) and at https://github.com/primer3-org/primer3/ (integrated version). Primer3 web application that allows masking sequences of 196 animal and plant genomes is available at http://primer3.ut.ee/. maido.remm@ut.ee. Supplementary data are available at Bioinformatics online.

Buckets: Aggregative, Intelligent Agents for Publishing

NASA Technical Reports Server (NTRS)

Nelson, Michael L.; Maly, Kurt; Shen, Stewart N. T.; Zubair, Mohammad

1998-01-01

Buckets are an aggregative, intelligent construct for publishing in digital libraries. The goal of research projects is to produce information. This information is often instantiated in several forms, differentiated by semantic types (report, software, video, datasets, etc.). A given semantic type can be further differentiated by syntactic representations as well (PostScript version, PDF version, Word version, etc.). Although the information was created together and subtle relationships can exist between them, different semantic instantiations are generally segregated along currently obsolete media boundaries. Reports are placed in report archives, software might go into a software archive, but most of the data and supporting materials are likely to be kept in informal personal archives or discarded altogether. Buckets provide an archive-independent container construct in which all related semantic and syntactic data types and objects can be logically grouped together, archived, and manipulated as a single object. Furthermore, buckets are active archival objects and can communicate with each other, people, or arbitrary network services.

Monte Carlo Shower Counter Studies

NASA Technical Reports Server (NTRS)

Snyder, H. David

1991-01-01

Activities and accomplishments related to the Monte Carlo shower counter studies are summarized. A tape of the VMS version of the GEANT software was obtained and installed on the central computer at Gallaudet University. Due to difficulties encountered in updating this VMS version, a decision was made to switch to the UNIX version of the package. This version was installed and used to generate the set of data files currently accessed by various analysis programs. The GEANT software was used to write files of data for positron and proton showers. Showers were simulated for a detector consisting of 50 alternating layers of lead and scintillator. Each file consisted of 1000 events at each of the following energies: 0.1, 0.5, 2.0, 10, 44, and 200 GeV. Data analysis activities related to clustering, chi square, and likelihood analyses are summarized. Source code for the GEANT user subprograms and data analysis programs are provided along with example data plots.

SEPAC software configuration control plan and procedures, revision 1

NASA Technical Reports Server (NTRS)

1981-01-01

SEPAC Software Configuration Control Plan and Procedures are presented. The objective of the software configuration control is to establish the process for maintaining configuration control of the SEPAC software beginning with the baselining of SEPAC Flight Software Version 1 and encompass the integration and verification tests through Spacelab Level IV Integration. They are designed to provide a simplified but complete configuration control process. The intent is to require a minimum amount of paperwork but provide total traceability of SEPAC software.

Basic Training

ERIC Educational Resources Information Center

Branzburg, Jeffrey

2006-01-01

In April 2006, Apple released a beta version of Boot Camp, a free software product that enables the installation of Windows XP (Home Edition or Professional with Service Pack 2) on an Intel-based Mac. (A beta version is not the final version, but it is ready for end users to try and test.) Essentially, Boot Camp splits your Mac into two hard…

BehavePlus fire modeling system, version 5.0: Variables

Treesearch

Patricia L. Andrews

2009-01-01

This publication has been revised to reflect updates to version 4.0 of the BehavePlus software. It was originally published as the BehavePlus fire modeling system, version 4.0: Variables in July, 2008.The BehavePlus fire modeling system is a computer program based on mathematical models that describe wildland fire behavior and effects and the...

A Legal Guide for the Software Developer.

ERIC Educational Resources Information Center

Minnesota Small Business Assistance Office, St. Paul.

This booklet has been prepared to familiarize the inventor, creator, or developer of a new computer software product or software invention with the basic legal issues involved in developing, protecting, and distributing the software in the United States. Basic types of software protection and related legal matters are discussed in detail,…

78 FR 47015 - Software Requirement Specifications for Digital Computer Software Used in Safety Systems of...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-08-02

... NUCLEAR REGULATORY COMMISSION [NRC-2012-0195] Software Requirement Specifications for Digital Computer Software Used in Safety Systems of Nuclear Power Plants AGENCY: Nuclear Regulatory Commission... issuing a revised regulatory guide (RG), revision 1 of RG 1.172, ``Software Requirement Specifications for...

CVISN guide to top-level design : preliminary version P1.1

DOT National Transportation Integrated Search

1999-06-25

The CVISN (Commercial Vehicle Information Systems and Networks) guide to top-level design shows the initial steps in the process of deploying CVISN in a state. For purposes of these guides, top-level design encompasses setting the scope of the projec...

To Your Health: NLM Update—MedlinePlus

MedlinePlus

... are using the current version of iTunes' client software on your computer and if you have an ... on other podcast distribution sites. If a podcast software client requires you to cut and paste a ...

Space shuttle on-orbit flight control software requirements, preliminary version

NASA Technical Reports Server (NTRS)

1975-01-01

Software modules associated with various flight control functions for the space shuttle orbiter are described. Data flow, interface requirements, initialization requirements and module sequencing requirements are considered. Block diagrams and tables are included.

The Expanded Capabilities Of The Cementitious Barriers Partnership Software Toolbox Version 2.0 - 14331

DOE Office of Scientific and Technical Information (OSTI.GOV)

Burns, Heather; Flach, Greg; Smith, Frank

2014-01-10

The Cementitious Barriers Partnership (CBP) Project is a multi-disciplinary, multi-institutional collaboration supported by the U.S. Department of Energy (US DOE) Office of Tank Waste Management. The CBP program has developed a set of integrated tools (based on state-of-the-art models and leaching test methods) that help improve understanding and predictions of the long-term structural, hydraulic and chemical performance of cementitious barriers used in nuclear applications. The CBP Software Toolbox – “Version 1.0” was released early in FY2013 and was used to support DOE-EM performance assessments in evaluating various degradation mechanisms that included sulfate attack, carbonation and constituent leaching. The sulfate attackmore » analysis predicted the extent and damage that sulfate ingress will have on concrete vaults over extended time (i.e., > 1000 years) and the carbonation analysis provided concrete degradation predictions from rebar corrosion. The new release “Version 2.0” includes upgraded carbonation software and a new software module to evaluate degradation due to chloride attack. Also included in the newer version are a dual regime module allowing evaluation of contaminant release in two regimes – both fractured and un-fractured. The integrated software package has also been upgraded with new plotting capabilities and many other features that increase the “user-friendliness” of the package. Experimental work has been generated to provide data to calibrate the models to improve the credibility of the analysis and reduce the uncertainty. Tools selected for and developed under this program have been used to evaluate and predict the behavior of cementitious barriers used in near-surface engineered waste disposal systems for periods of performance up to or longer than 100 years for operating facilities and longer than 1000 years for waste disposal. The CBP Software Toolbox is and will continue to produce tangible benefits to the working DOE Performance Assessment (PA) community.« less

Validation of Tendril TrueHome Using Software-to-Software Comparison

DOE Office of Scientific and Technical Information (OSTI.GOV)

Maguire, Jeffrey B; Horowitz, Scott G; Moore, Nathan

This study performed comparative evaluation of EnergyPlus version 8.6 and Tendril TrueHome, two physics-based home energy simulation models, to identify differences in energy consumption predictions between the two programs and resolve discrepancies between them. EnergyPlus is considered a benchmark, best-in-class software tool for building energy simulation. This exercise sought to improve both software tools through additional evaluation/scrutiny.

A second generation experiment in fault-tolerant software

NASA Technical Reports Server (NTRS)

Knight, J. C.

1986-01-01

The primary goal was to determine whether the application of fault tolerance to software increases its reliability if the cost of production is the same as for an equivalent nonfault tolerance version derived from the same requirements specification. Software development protocols are discussed. The feasibility of adapting to software design fault tolerance the technique of N-fold Modular Redundancy with majority voting was studied.

Rotary engine performance computer program (RCEMAP and RCEMAPPC): User's guide

NASA Technical Reports Server (NTRS)

Bartrand, Timothy A.; Willis, Edward A.

1993-01-01

This report is a user's guide for a computer code that simulates the performance of several rotary combustion engine configurations. It is intended to assist prospective users in getting started with RCEMAP and/or RCEMAPPC. RCEMAP (Rotary Combustion Engine performance MAP generating code) is the mainframe version, while RCEMAPPC is a simplified subset designed for the personal computer, or PC, environment. Both versions are based on an open, zero-dimensional combustion system model for the prediction of instantaneous pressures, temperature, chemical composition and other in-chamber thermodynamic properties. Both versions predict overall engine performance and thermal characteristics, including bmep, bsfc, exhaust gas temperature, average material temperatures, and turbocharger operating conditions. Required inputs include engine geometry, materials, constants for use in the combustion heat release model, and turbomachinery maps. Illustrative examples and sample input files for both versions are included.

Certification Processes for Safety-Critical and Mission-Critical Aerospace Software

NASA Technical Reports Server (NTRS)

Nelson, Stacy

2003-01-01

This document is a quick reference guide with an overview of the processes required to certify safety-critical and mission-critical flight software at selected NASA centers and the FAA. Researchers and software developers can use this guide to jumpstart their understanding of how to get new or enhanced software onboard an aircraft or spacecraft. The introduction contains aerospace industry definitions of safety and safety-critical software, as well as, the current rationale for certification of safety-critical software. The Standards for Safety-Critical Aerospace Software section lists and describes current standards including NASA standards and RTCA DO-178B. The Mission-Critical versus Safety-Critical software section explains the difference between two important classes of software: safety-critical software involving the potential for loss of life due to software failure and mission-critical software involving the potential for aborting a mission due to software failure. The DO-178B Safety-critical Certification Requirements section describes special processes and methods required to obtain a safety-critical certification for aerospace software flying on vehicles under auspices of the FAA. The final two sections give an overview of the certification process used at Dryden Flight Research Center and the approval process at the Jet Propulsion Lab (JPL).

Orbit attitude processor. STS-1 bench program verification test plan

NASA Technical Reports Server (NTRS)

Mcclain, C. R.

1980-01-01

A plan for the static verification of the STS-1 ATT PROC ORBIT software requirements is presented. The orbit version of the SAPIENS bench program is used to generate the verification data. A brief discussion of the simulation software and flight software modules is presented along with a description of the test cases.

Software architecture standard for simulation virtual machine, version 2.0

NASA Technical Reports Server (NTRS)

Sturtevant, Robert; Wessale, William

1994-01-01

The Simulation Virtual Machine (SBM) is an Ada architecture which eases the effort involved in the real-time software maintenance and sustaining engineering. The Software Architecture Standard defines the infrastructure which all the simulation models are built from. SVM was developed for and used in the Space Station Verification and Training Facility.

The pseudo-Boolean optimization approach to form the N-version software structure

NASA Astrophysics Data System (ADS)

Kovalev, I. V.; Kovalev, D. I.; Zelenkov, P. V.; Voroshilova, A. A.

2015-10-01

The problem of developing an optimal structure of N-version software system presents a kind of very complex optimization problem. This causes the use of deterministic optimization methods inappropriate for solving the stated problem. In this view, exploiting heuristic strategies looks more rational. In the field of pseudo-Boolean optimization theory, the so called method of varied probabilities (MVP) has been developed to solve problems with a large dimensionality. Some additional modifications of MVP have been made to solve the problem of N-version systems design. Those algorithms take into account the discovered specific features of the objective function. The practical experiments have shown the advantage of using these algorithm modifications because of reducing a search space.

How To Select an Event Management System: A Guide to Selecting the Most Effective Resource Management System for College Union and Student Activities Professionals.

ERIC Educational Resources Information Center

Anderson, Scott; Raasch, Kevin

2002-01-01

Provides an evaluation template for student activities professionals charged with evaluating competitive event scheduling software. Guides staff in making an informed decision on whether to retain event management technology provided through an existing vendor or choose "best-of-breed" scheduling software. (EV)

Treatment of child anxiety disorders via guided parent-delivered cognitive-behavioural therapy: randomised controlled trial.

PubMed

Thirlwall, Kerstin; Cooper, Peter J; Karalus, Jessica; Voysey, Merryn; Willetts, Lucy; Creswell, Cathy

2013-12-01

Promising evidence has emerged of clinical gains using guided self-help cognitive-behavioural therapy (CBT) for child anxiety and by involving parents in treatment; however, the efficacy of guided parent-delivered CBT has not been systematically evaluated in UK primary and secondary settings. To evaluate the efficacy of low-intensity guided parent-delivered CBT treatments for children with anxiety disorders. A total of 194 children presenting with a current anxiety disorder, whose primary carer did not meet criteria for a current anxiety disorder, were randomly allocated to full guided parent-delivered CBT (four face-to-face and four telephone sessions) or brief guided parent-delivered CBT (two face-to-face and two telephone sessions), or a wait-list control group (trial registration: ISRCTN92977593). Presence and severity of child primary anxiety disorder (Anxiety Disorders Interview Schedule for DSM-IV, child/parent versions), improvement in child presentation of anxiety (Clinical Global Impression - Improvement scale), and change in child anxiety symptoms (Spence Children's Anxiety Scale, child/parent version and Child Anxiety Impact scale, parent version) were assessed at post-treatment and for those in the two active treatment groups, 6 months post-treatment. Full guided parent-delivered CBT produced superior diagnostic outcomes compared with wait-list at post-treatment, whereas brief guided parent-delivered CBT did not: at post-treatment, 25 (50%) of those in the full guided CBT group had recovered from their primary diagnosis, compared with 16 (25%) of those on the wait-list (relative risk (RR) 1.85, 95% CI 1.14-2.99); and in the brief guided CBT group, 18 participants (39%) had recovered from their primary diagnosis post-treatment (RR = 1.56, 95% CI 0.89-2.74). Level of therapist training and experience was unrelated to child outcome. Full guided parent-delivered CBT is an effective and inexpensive first-line treatment for child anxiety.

Industrial Waste Management Evaluation Model Version 3.1

EPA Pesticide Factsheets

IWEM is a screening level ground water model designed to simulate contaminant fate and transport. IWEM v3.1 is the latest version of the IWEM software, which includes additional tools to evaluate the beneficial use of industrial materials

IDC Re-Engineering Phase 2 Iteration E2 Use Case Realizations Version 1.2.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hamlet, Benjamin R.; Harris, James M.; Burns, John F.

2016-12-01

This document contains 4 use case realizations generated from the model contained in Rational Software Architect. These use case realizations are the current versions of the realizations originally delivered in Elaboration Iteration 2.

Aviation Environmental Design Tool (AEDT) technical manual version 2a

DOT National Transportation Integrated Search

2014-01-01

The Federal Aviation Administration, Office of Environment and Energy (FAA-AEE) has developed the Aviation : Environmental Design Tool (AEDT) version 2a software system with the support of the following development team: : FAA, National Aeronautics a...

Aviation Environmental Design Tool (AEDT) technical manual : version 2c

DOT National Transportation Integrated Search

2016-09-12

The Federal Aviation Administration, Office of Environment and Energy (FAA-AEE) has developed the Aviation Environmental Design Tool (AEDT) version 2c software system with the support of the following development team: FAA, National Aeronautics and S...

76 FR 12091 - Commission Information Collection Activities, Proposed Collections; Comment Request; Extension

Federal Register 2010, 2011, 2012, 2013, 2014

2011-03-04

... Microsoft Excel version of the Form 561. The Microsoft Excel version of the Form 561 has been available... of the Excel software to make filling the form out easier and compiling the filed information more...

Post-upgrade testing on a radiotherapy oncology information system with an embedded record and verify system following the IAEA Human Health Report No. 7 recommendations.

PubMed

Nyathi, Thulani; Colyer, Christopher; Bhardwaj, Anup Kumar; Rijken, James; Morton, Jason

2016-06-01

Record and verify (R&V) systems have proven that their application in radiotherapy clinics leads to a significant reduction in mis-treatments of patients. The purpose of this technical note is to share our experience of acceptance testing, commissioning and setting up a quality assurance programme for the MOSAIQ® oncology information system and R&V system after upgrading from software version 2.41 to 2.6 in a multi-vendor, multi-site environment. Testing was guided primarily by the IAEA Human Report No. 7 recommendations, but complemented by other departmental workflow specific tests. To the best of our knowledge, this is the first time successful implementation of the IAEA Human Health Report Series No. 7 recommendations have been reported in the literature. Copyright © 2016 Associazione Italiana di Fisica Medica. Published by Elsevier Ltd. All rights reserved.

DOT2: Macromolecular Docking With Improved Biophysical Models

PubMed Central

Roberts, Victoria A.; Thompson, Elaine E.; Pique, Michael E.; Perez, Martin S.; Eyck, Lynn Ten

2015-01-01

Computational docking is a useful tool for predicting macromolecular complexes, which are often difficult to determine experimentally. Here we present the DOT2 software suite, an updated version of the DOT intermolecular docking program. DOT2 provides straightforward, automated construction of improved biophysical models based on molecular coordinates, offering checkpoints that guide the user to include critical features. DOT has been updated to run more quickly, allow flexibility in grid size and spacing, and generate a complete list of favorable candidate configu-rations. Output can be filtered by experimental data and rescored by the sum of electrostatic and atomic desolvation energies. We show that this rescoring method improves the ranking of correct complexes for a wide range of macromolecular interactions, and demonstrate that biologically relevant models are essential for biologically relevant results. The flexibility and versatility of DOT2 accommodate realistic models of complex biological systems, improving the likelihood of a successful docking outcome. PMID:23695987

DSS command software update

NASA Technical Reports Server (NTRS)

Stinnett, W. G.

1980-01-01

The modifications, additions, and testing results for a version of the Deep Space Station command software, generated for support of the Voyager Saturn encounter, are discussed. The software update requirements included efforts to: (1) recode portions of the software to permit recovery of approximately 2000 words of memory; (2) correct five Voyager Ground data System liens; (3) provide capability to automatically turn off the command processor assembly local printer during periods of low activity; and (4) correct anomalies existing in the software.

On-Orbit Software Analysis

NASA Technical Reports Server (NTRS)

Moran, Susanne I.

2004-01-01

The On-Orbit Software Analysis Research Infusion Project was done by Intrinsyx Technologies Corporation (Intrinsyx) at the National Aeronautics and Space Administration (NASA) Ames Research Center (ARC). The Project was a joint collaborative effort between NASA Codes IC and SL, Kestrel Technology (Kestrel), and Intrinsyx. The primary objectives of the Project were: Discovery and verification of software program properties and dependencies, Detection and isolation of software defects across different versions of software, and Compilation of historical data and technical expertise for future applications

Annotated bibliography of software engineering laboratory literature

NASA Technical Reports Server (NTRS)

Groves, Paula; Valett, Jon

1990-01-01

An annotated bibliography of technical papers, documents, and memorandums produced by or related to the Software Engineering Laboratory is given. More than 100 publications are summarized. These publications cover many areas of software engineering and range from research reports to software documentation. This document has been updated and reorganized substantially since the original version (SEL-82-006, November 1982). All materials have been grouped into eight general subject areas for easy reference: the Software Engineering Laboratory; the Software Engineering Laboratory-software development documents; software tools; software models; software measurement; technology evaluations; Ada technology; and data collection. Subject and author indexes further classify these documents by specific topic and individual author.

Annotated bibliography of Software Engineering Laboratory literature

NASA Technical Reports Server (NTRS)

Morusiewicz, Linda; Valett, Jon

1993-01-01

This document is an annotated bibliography of technical papers, documents, and memorandums produced by or related to the Software Engineering Laboratory. Nearly 200 publications are summarized. These publications cover many areas of software engineering and range from research reports to software documentation. This document has been updated and reorganized substantially since the original version (SEL-82-006, November 1982). All materials have been grouped into eight general subject areas for easy reference: the Software Engineering Laboratory; the Software Engineering Laboratory: software development documents; software tools; software models; software measurement; technology evaluations; Ada technology; and data collection. This document contains an index of these publications classified by individual author.

Evaluation of a breast software model for 2D and 3D X-ray imaging studies of the breast.

PubMed

Baneva, Yanka; Bliznakova, Kristina; Cockmartin, Lesley; Marinov, Stoyko; Buliev, Ivan; Mettivier, Giovanni; Bosmans, Hilde; Russo, Paolo; Marshall, Nicholas; Bliznakov, Zhivko

2017-09-01

In X-ray imaging, test objects reproducing breast anatomy characteristics are realized to optimize issues such as image processing or reconstruction, lesion detection performance, image quality and radiation induced detriment. Recently, a physical phantom with a structured background has been introduced for both 2D mammography and breast tomosynthesis. A software version of this phantom and a few related versions are now available and a comparison between these 3D software phantoms and the physical phantom will be presented. The software breast phantom simulates a semi-cylindrical container filled with spherical beads of different diameters. Four computational breast phantoms were generated with a dedicated software application and for two of these, physical phantoms are also available and they are used for the side by side comparison. Planar projections in mammography and tomosynthesis were simulated under identical incident air kerma conditions. Tomosynthesis slices were reconstructed with an in-house developed reconstruction software. In addition to a visual comparison, parameters like fractal dimension, power law exponent β and second order statistics (skewness, kurtosis) of planar projections and tomosynthesis reconstructed images were compared. Visually, an excellent agreement between simulated and real planar and tomosynthesis images is observed. The comparison shows also an overall very good agreement between parameters evaluated from simulated and experimental images. The computational breast phantoms showed a close match with their physical versions. The detailed mathematical analysis of the images confirms the agreement between real and simulated 2D mammography and tomosynthesis images. The software phantom is ready for optimization purpose and extrapolation of the phantom to other breast imaging techniques. Copyright © 2017 Associazione Italiana di Fisica Medica. Published by Elsevier Ltd. All rights reserved.

Enhanced CARES Software Enables Improved Ceramic Life Prediction

NASA Technical Reports Server (NTRS)

Janosik, Lesley A.

1997-01-01

The NASA Lewis Research Center has developed award-winning software that enables American industry to establish the reliability and life of brittle material (e.g., ceramic, intermetallic, graphite) structures in a wide variety of 21st century applications. The CARES (Ceramics Analysis and Reliability Evaluation of Structures) series of software is successfully used by numerous engineers in industrial, academic, and government organizations as an essential element of the structural design and material selection processes. The latest version of this software, CARES/Life, provides a general- purpose design tool that predicts the probability of failure of a ceramic component as a function of its time in service. CARES/Life was recently enhanced by adding new modules designed to improve functionality and user-friendliness. In addition, a beta version of the newly-developed CARES/Creep program (for determining the creep life of monolithic ceramic components) has just been released to selected organizations.

CASPER Version 2.0

NASA Technical Reports Server (NTRS)

Chien, Steve; Rabideau, Gregg; Tran, Daniel; Knight, Russell; Chouinard, Caroline; Estlin, Tara; Gaines, Daniel; Clement, Bradley; Barrett, Anthony

2007-01-01

CASPER is designed to perform automated planning of interdependent activities within a system subject to requirements, constraints, and limitations on resources. In contradistinction to the traditional concept of batch planning followed by execution, CASPER implements a concept of continuous planning and replanning in response to unanticipated changes (including failures), integrated with execution. Improvements over other, similar software that have been incorporated into CASPER version 2.0 include an enhanced executable interface to facilitate integration with a wide range of execution software systems and supporting software libraries; features to support execution while reasoning about urgency, importance, and impending deadlines; features that enable accommodation to a wide range of computing environments that include various central processing units and random- access-memory capacities; and improved generic time-server and time-control features.

Research Traffic Management Advisor (rTMA) Up-level Final Report

NASA Technical Reports Server (NTRS)

Capps, Richard A.

2013-01-01

The FAA Time Based Flow Management (TBFM) Program provides for operational use and continued development of the Traffic Management Advisor (TMA) technology that NASA demonstrated in 1996. Although NASA's Center-TRACON Automation System (CTAS) software baseline includes advanced versions of TMA, some research activities are better served by a version of TMA that more closely matches the FAA's TBFM software. Beginning in 2009, NASA created Research TMA (rTMA) to enable researchers to work with FAA TBFM software in a research environment. The original rTMA was derived from TBFM v3.10 and later up-leveled to TBFM v3.12. This report documents the most recent up-level effort in which rTMA was re-derived from TBFM v4.00.07.

Multifractal geometry in analysis and processing of digital retinal photographs for early diagnosis of human diabetic macular edema.

PubMed

Tălu, Stefan

2013-07-01

The purpose of this paper is to determine a quantitative assessment of the human retinal vascular network architecture for patients with diabetic macular edema (DME). Multifractal geometry and lacunarity parameters are used in this study. A set of 10 segmented and skeletonized human retinal images, corresponding to both normal (five images) and DME states of the retina (five images), from the DRIVE database was analyzed using the Image J software. Statistical analyses were performed using Microsoft Office Excel 2003 and GraphPad InStat software. The human retinal vascular network architecture has a multifractal geometry. The average of generalized dimensions (Dq) for q = 0, 1, 2 of the normal images (segmented versions), is similar to the DME cases (segmented versions). The average of generalized dimensions (Dq) for q = 0, 1 of the normal images (skeletonized versions), is slightly greater than the DME cases (skeletonized versions). However, the average of D2 for the normal images (skeletonized versions) is similar to the DME images. The average of lacunarity parameter, Λ, for the normal images (segmented and skeletonized versions) is slightly lower than the corresponding values for DME images (segmented and skeletonized versions). The multifractal and lacunarity analysis provides a non-invasive predictive complementary tool for an early diagnosis of patients with DME.

Evaluation of Agricultural Accounting Software. Improved Decision Making. Third Edition.

ERIC Educational Resources Information Center

Lovell, Ashley C., Comp.

Following a discussion of the evaluation criteria for choosing accounting software, this guide contains reviews of 27 accounting software programs that could be used by farm or ranch business managers. The information in the reviews was provided by the software vendors and covers the following points for each software package: general features,…

Software Acquisition Risk Management Key Process Area (KPA) - A Guidebook Version 1.0.

DTIC Science & Technology

1997-08-01

Budget - Software Project Management Practices and Techniques. McGraw-Hill International (UK) Limited, 1992. [Boehm 81 ] Boehm, Barry . Software...Engineering Economics. Englewood Cliffs, N.J.: Prentice-Hall, Inc., 1981. [Boehm 89] Boehm, Barry . IEEE Tutorial on Software Risk Management. New York: IEEE...95] [Mayrhauser 90] [Moran 90] [Myers 96] [NRC 89] [Osborn 53] [Paulk 95] [ Pressman 92] [Pulford 96] [Scholtes 88] [Sisti 94] [STSC 96

NESSUS/NASTRAN Interface (Modification of NESSUS to FORTRAN 90 Standard)

NASA Technical Reports Server (NTRS)

1997-01-01

The objective of this work has been to develop a FORTRAN 90 (F90) version of the NESSUS probabilistic analysis software, Version 6.2 with NASTRAN interface. The target platform for the modified NESSUS code is the SGI workstation.

TEMPO Software Modifications for SEVER Evaluation

DTIC Science & Technology

2009-09-01

existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding...115 COMPACT DISC. TEMPO VERSION 3 AND ASSOCIATED DATA …..ENCLOSED ix LIST...Setup..........................................................46 Figure 16. TEMPO Version 3 Startup Dialog Box

Improving the trajectory of transpedicular transdiscal lumbar screw fixation with a computer-assisted 3D-printed custom drill guide

PubMed Central

Shao, Zhen-Xuan; Wang, Jian-Shun; Lin, Zhong-Ke; Ni, Wen-Fei; Wang, Xiang-Yang

2017-01-01

Transpedicular transdiscal screw fixation is an alternative technique used in lumbar spine fixation; however, it requires an accurate screw trajectory. The aim of this study is to design a novel 3D-printed custom drill guide and investigate its accuracy to guide the trajectory of transpedicular transdiscal (TPTD) lumbar screw fixation. Dicom images of thirty lumbar functional segment units (FSU, two segments) of L1–L4 were acquired from the PACS system in our hospital (patients who underwent a CT scan for other abdomen diseases and had normal spine anatomy) and imported into reverse design software for three-dimensional reconstructions. Images were used to print the 3D lumbar models and were imported into CAD software to design an optimal TPTD screw trajectory and a matched custom drill guide. After both the 3D printed FSU models and 3D-printed custom drill guide were prepared, the TPTD screws will be guided with a 3D-printed custom drill guide and introduced into the 3D printed FSU models. No significant statistical difference in screw trajectory angles was observed between the digital model and the 3D-printed model (P > 0.05). Our present study found that, with the help of CAD software, it is feasible to design a TPTD screw custom drill guide that could guide the accurate TPTD screw trajectory on 3D-printed lumbar models. PMID:28717599

Colorado Fathers' Resource Guide = Guia de Recursos para los Padres en Colorado.

ERIC Educational Resources Information Center

Colorado Foundation for Families and Children, Denver.

Developed through the Colorado Fatherhood Connection, this guide, in English- and Spanish-language versions, provides suggestions and resources for fathers as well as tips on discipline, communication, and activities fathers can do with their children. Topics addressed in the guide include characteristics of responsible fatherhood, characteristics…

Career Opportunities Instructional Guide. Spanish Student Materials.

ERIC Educational Resources Information Center

Hendrix, Mary W.; And Others

This document is the Spanish language version of the student materials component designed to accompany the Career Opportunities Instructional Guide. Page numbers are consistent with numbering in that guide. Seventeen units are provided. The materials in Unit 1 concern various aspects of locating information about occupations; Unit 2 provides an…

Nuclear Computerized Library for Assessing Reactor Reliability (NUCLARR). Version 3.5, Quick Reference Guide

DOE Office of Scientific and Technical Information (OSTI.GOV)

Gilbert, B.G.; Richards, R.E.; Reece, W.J.

1992-10-01

This Reference Guide contains instructions on how to install and use Version 3.5 of the NRC-sponsored Nuclear Computerized Library for Assessing Reactor Reliability (NUCLARR). The NUCLARR data management system is contained in compressed files on the floppy diskettes that accompany this Reference Guide. NUCLARR is comprised of hardware component failure data (HCFD) and human error probability (HEP) data, both of which are available via a user-friendly, menu driven retrieval system. The data may be saved to a file in a format compatible with IRRAS 3.0 and commercially available statistical packages, or used to formulate log-plots and reports of data retrievalmore » and aggregation findings.« less

Recreacion/Transporte. Libro del Profesor (Recreation/Transportation. Teacher's Guide). B3. CHOICE (Challenging Options in Career Education).

ERIC Educational Resources Information Center

Mid-Hudson Migrant Education Center, New Paltz, NY.

Written in Spanish, this guide for the grade 2 career education unit for migrant children focuses on the fields of recreation and transportation. Like the English version, the guide covers 11 jobs--travel agent, tour guide, camp counselor, coach, usher, school bus driver, airplane pilot, trucker, mover, railroad conductor, and astronaut. Student…

A Guide to Two Cultures: American. A Guide to Two Cultures: Indochinese. Publication 8.

ERIC Educational Resources Information Center

Interagency Task Force for Indochina Refugees, Washington, DC.

This guide was adapted from an article by Arthur Gordon originally titled "How to Understand Those Mystifying Americans." Each page of the text is divided into two parts, with the English version given on one side and the Vietnamese on the other. The guide is composed of two main sections. The first is addressed to Indochinese refugees…

MERCHANT OF VENICE. LITERATURE CURRICULUM III, TEACHER VERSION.

ERIC Educational Resources Information Center

KITZHABER, ALBERT R.

THIS TEACHING GUIDE ON "THE MERCHANT OF VENICE" WAS PREPARED FOR USE IN A NINTH-GRADE LITERATURE CURRICULUM. THE PURPOSE OF THE GUIDE WAS TO ILLUMINATE THE PLAY AS A WHOLE, AND TO SUGGEST TO THE TEACHER SOME USEFUL PRINCIPLES FOR FRAMING QUESTIONS AND GUIDING DISCUSSIONS IN THE CLASSROOM. THE GUIDE WAS NOT TO BE USED, HOWEVER, AS A BASE…

The Virtual Genetics Lab II: Improvements to a Freely Available Software Simulation of Genetics

ERIC Educational Resources Information Center

White, Brian T.

2012-01-01

The Virtual Genetics Lab II (VGLII) is an improved version of the highly successful genetics simulation software, the Virtual Genetics Lab (VGL). The software allows students to use the techniques of genetic analysis to design crosses and interpret data to solve realistic genetics problems involving a hypothetical diploid insect. This is a brief…

MISR Data Product Specifications

Atmospheric Science Data Center

2016-11-25

... and usage of metadata. Improvements to MISR algorithmic software occasionally result in changes to file formats. While these changes ...  (DPS).   DPS Revision:   Rev. S Software Version:  5.0.9 Date:  September 20, 2010, updated April ...

Starlink Software Developments

NASA Astrophysics Data System (ADS)

Bly, M. J.; Giaretta, D.; Currie, M. J.; Taylor, M.

Some current and upcoming software developments from Starlink were demonstrated. These included invoking traditional Starlink applications via web services, the current version of the ORAC-DR reduction pipeline, and some new Java-based tools including Treeview, an interactive explorer of hierarchical data structures.

Supplement to The User's Guide for The Stand Prognosis Model-version 5.0

Treesearch

William R. Wykoff

1986-01-01

Differences between Prognosis Model versions 4.0 and 5.0 are described. Additions to version 5.0 include an event monitor that schedules activities contingent on stand characteristics, a regeneration establishment model that predicts the structure of the regeneration stand following treatment, and a COVER model that predicts shrub development and total canopy cover....

Surrogate oracles, generalized dependency and simpler models

NASA Technical Reports Server (NTRS)

Wilson, Larry

1990-01-01

Software reliability models require the sequence of interfailure times from the debugging process as input. It was previously illustrated that using data from replicated debugging could greatly improve reliability predictions. However, inexpensive replication of the debugging process requires the existence of a cheap, fast error detector. Laboratory experiments can be designed around a gold version which is used as an oracle or around an n-version error detector. Unfortunately, software developers can not be expected to have an oracle or to bear the expense of n-versions. A generic technique is being investigated for approximating replicated data by using the partially debugged software as a difference detector. It is believed that the failure rate of each fault has significant dependence on the presence or absence of other faults. Thus, in order to discuss a failure rate for a known fault, the presence or absence of each of the other known faults needs to be specified. Also, in simpler models which use shorter input sequences without sacrificing accuracy are of interest. In fact, a possible gain in performance is conjectured. To investigate these propositions, NASA computers running LIC (RTI) versions are used to generate data. This data will be used to label the debugging graph associated with each version. These labeled graphs will be used to test the utility of a surrogate oracle, to analyze the dependent nature of fault failure rates and to explore the feasibility of reliability models which use the data of only the most recent failures.

OLS Client and OLS Dialog: Open Source Tools to Annotate Public Omics Datasets.

PubMed

Perez-Riverol, Yasset; Ternent, Tobias; Koch, Maximilian; Barsnes, Harald; Vrousgou, Olga; Jupp, Simon; Vizcaíno, Juan Antonio

2017-10-01

The availability of user-friendly software to annotate biological datasets and experimental details is becoming essential in data management practices, both in local storage systems and in public databases. The Ontology Lookup Service (OLS, http://www.ebi.ac.uk/ols) is a popular centralized service to query, browse and navigate biomedical ontologies and controlled vocabularies. Recently, the OLS framework has been completely redeveloped (version 3.0), including enhancements in the data model, like the added support for Web Ontology Language based ontologies, among many other improvements. However, the new OLS is not backwards compatible and new software tools are needed to enable access to this widely used framework now that the previous version is no longer available. We here present the OLS Client as a free, open-source Java library to retrieve information from the new version of the OLS. It enables rapid tool creation by providing a robust, pluggable programming interface and common data model to programmatically access the OLS. The library has already been integrated and is routinely used by several bioinformatics resources and related data annotation tools. Secondly, we also introduce an updated version of the OLS Dialog (version 2.0), a Java graphical user interface that can be easily plugged into Java desktop applications to access the OLS. The software and related documentation are freely available at https://github.com/PRIDE-Utilities/ols-client and https://github.com/PRIDE-Toolsuite/ols-dialog. © 2017 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

[Development of a current version of a software application for research and practice in human nutrition (GRUNUMUR 2.0)].

PubMed

Pérez-Llamas, F; Garaulet, M; Torralba, C; Zamora, S

2012-01-01

The aim of this paper is the description of a new version of the software application GRUNUMUR, a useful tool for human nutrition studies designed by the Nutrition Research Group from the Murcia University. Similar to the first, this second version offers the possibility to address different types of study: dietary habits (24 h recall, 7-days dietary record and Food Frequency Questionnaire), epidemiological, anthropometrical and clinical studies. The new version, called GRUNUMUR 2.0, compatible with the first one, has an online help system for all functions of the application, providing the user tasks, allows safe storage of a virtually unlimited number of results, in an orderly and organized way, you can retrieve it when required, through a system of backups and scheduled maintenance and unattended (tasks performed by a server), another advantage is its total accessibility, both from the university intranet (www.um.es) and from the internet, it works via Web Browser (http://senver.inf.um.es/esen), and finally, allows data to be exported to Excel for further processing with other applications as well as publishing reports in PDF, to deliver study participants if necessary. The new version has been validated by comparing the extracted results with those obtained from the other software with no significant differences for any of the variables analyzed. The application GRUNUMUR 2.0 is a tool improved, useful and reliable for addressing human nutrition studies.

Inter- and Intrarater Reliability Using Different Software Versions of E4D Compare in Dental Education.

PubMed

Callan, Richard S; Cooper, Jeril R; Young, Nancy B; Mollica, Anthony G; Furness, Alan R; Looney, Stephen W

2015-06-01

The problems associated with intra- and interexaminer reliability when assessing preclinical performance continue to hinder dental educators' ability to provide accurate and meaningful feedback to students. Many studies have been conducted to evaluate the validity of utilizing various technologies to assist educators in achieving that goal. The purpose of this study was to compare two different versions of E4D Compare software to determine if either could be expected to deliver consistent and reliable comparative results, independent of the individual utilizing the technology. Five faculty members obtained E4D digital images of students' attempts (sample model) at ideal gold crown preparations for tooth #30 performed on typodont teeth. These images were compared to an ideal (master model) preparation utilizing two versions of E4D Compare software. The percent correlations between and within these faculty members were recorded and averaged. The intraclass correlation coefficient was used to measure both inter- and intrarater agreement among the examiners. The study found that using the older version of E4D Compare did not result in acceptable intra- or interrater agreement among the examiners. However, the newer version of E4D Compare, when combined with the Nevo scanner, resulted in a remarkable degree of agreement both between and within the examiners. These results suggest that consistent and reliable results can be expected when utilizing this technology under the protocol described in this study.

42 CFR 423.160 - Standards for electronic prescribing.

Code of Federal Regulations, 2012 CFR

2012-10-01

... Council for Prescription Drug Programs Prescriber/Pharmacist Interface SCRIPT Standard, Implementation... National Council for Prescription Drug Programs Prescriber/Pharmacist Interface SCRIPT Standard... Prescriber/Pharmacist Interface SCRIPT Standard, Implementation Guide Version 8, Release 1 (Version 8.1...

42 CFR 423.160 - Standards for electronic prescribing.

Code of Federal Regulations, 2013 CFR

2013-10-01

... National Council for Prescription Drug Programs Prescriber/Pharmacist Interface SCRIPT Standard... National Council for Prescription Drug Programs Prescriber/Pharmacist Interface SCRIPT Standard... Prescriber/Pharmacist Interface SCRIPT Standard, Implementation Guide Version 8, Release 1 (Version 8.1...

42 CFR 423.160 - Standards for electronic prescribing.

Code of Federal Regulations, 2014 CFR

2014-10-01

... National Council for Prescription Drug Programs Prescriber/Pharmacist Interface SCRIPT Standard... National Council for Prescription Drug Programs Prescriber/Pharmacist Interface SCRIPT Standard... Prescriber/Pharmacist Interface SCRIPT Standard, Implementation Guide Version 8, Release 1 (Version 8.1...

Watershed Health Assessment Tools Investigating Fisheries WHAT IF Version 2: A Manager’s Guide to New Features

EPA Pesticide Factsheets

The CVI Watershed Health Assessment Tool Investigating Fisheries, WHAT IF version 2, currently contains five components: Regional Prioritization Tool, Hydrologic Tool, Clustering Tool, Habitat Suitability Tool, BASS model

User's guide to programming fault injection and data acquisition in the SIFT environment

NASA Technical Reports Server (NTRS)

Elks, Carl R.; Green, David F.; Palumbo, Daniel L.

1987-01-01

Described are the features, command language, and functional design of the SIFT (Software Implemented Fault Tolerance) fault injection and data acquisition interface software. The document is also intended to assist and guide the SIFT user in defining, developing, and executing SIFT fault injection experiments and the subsequent collection and reduction of that fault injection data. It is also intended to be used in conjunction with the SIFT User's Guide (NASA Technical Memorandum 86289) for reference to SIFT system commands, procedures and functions, and overall guidance in SIFT system programming.

CAD/CAM guided surgery in implant dentistry. A review of software packages and step-by-step protocols for planning surgical guides.

PubMed

Scherer, Michael D; Kattadiyil, Mathew T; Parciak, Ewa; Puri, Shweta

2014-01-01

Three-dimensional radiographic imaging for dental implant treatment planning is gaining widespread interest and popularity. However, application of the data from 30 imaging can be a complex and daunting process initially. The purpose of this article is to describe features of three software packages and the respective computerized guided surgical templates (GST) fabricated from them. A step-by-step method of interpreting and ordering a GST to simplify the process of the surgical planning and implant placement is discussed.

The analysis of the statistical and historical information gathered during the development of the Shuttle Orbiter Primary Flight Software

NASA Technical Reports Server (NTRS)

Simmons, D. B.; Marchbanks, M. P., Jr.; Quick, M. J.

1982-01-01

The results of an effort to thoroughly and objectively analyze the statistical and historical information gathered during the development of the Shuttle Orbiter Primary Flight Software are given. The particular areas of interest include cost of the software, reliability of the software, requirements for the software and how the requirements changed during development of the system. Data related to the current version of the software system produced some interesting results. Suggestions are made for the saving of additional data which will allow additional investigation.

The 1991 version of the plume impingement computer program. Volume 2: User's input guide

NASA Technical Reports Server (NTRS)

Bender, Robert L.; Somers, Richard E.; Prendergast, Maurice J.; Clayton, Joseph P.; Smith, Sheldon D.

1991-01-01

The Plume Impingement Program (PLIMP) is a computer code used to predict impact pressures, forces, moments, heating rates, and contamination on surfaces due to direct impingement flowfields. Typically, it has been used to analyze the effects of rocket exhaust plumes on nearby structures from ground level to the vacuum of space. The program normally uses flowfields generated by the MOC, RAMP2, SPF/2, or SFPGEN computer programs. It is capable of analyzing gaseous and gas/particle flows. A number of simple subshapes are available to model the surfaces of any structure. The original PLIMP program has been modified many times of the last 20 years. The theoretical bases for the referenced major changes, and additional undocumented changes and enhancements since 1988 are summarized in volume 1 of this report. This volume is the User's Input Guide and should be substituted for all previous guides when running the latest version of the program. This version can operate on VAX and UNIX machines with NCAR graphics ability.

Integrating macromolecular X-ray diffraction data with the graphical user interface iMosflm.

PubMed

Powell, Harold R; Battye, T Geoff G; Kontogiannis, Luke; Johnson, Owen; Leslie, Andrew G W

2017-07-01

X-ray crystallography is the predominant source of structural information for biological macromolecules, providing fundamental insights into biological function. The availability of robust and user-friendly software to process the collected X-ray diffraction images makes the technique accessible to a wider range of scientists. iMosflm/MOSFLM (http://www.mrc-lmb.cam.ac.uk/harry/imosflm) is a software package designed to achieve this goal. The graphical user interface (GUI) version of MOSFLM (called iMosflm) is designed to guide inexperienced users through the steps of data integration, while retaining powerful features for more experienced users. Images from almost all commercially available X-ray detectors can be handled using this software. Although the program uses only 2D profile fitting, it can readily integrate data collected in the 'fine phi-slicing' mode (in which the rotation angle per image is less than the crystal mosaic spread by a factor of at least 2), which is commonly used with modern very fast readout detectors. The GUI provides real-time feedback on the success of the indexing step and the progress of data processing. This feedback includes the ability to monitor detector and crystal parameter refinement and to display the average spot shape in different regions of the detector. Data scaling and merging tasks can be initiated directly from the interface. Using this protocol, a data set of 360 images with ∼2,000 reflections per image can be processed in ∼4 min.

Xyce parallel electronic simulator design.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Thornquist, Heidi K.; Rankin, Eric Lamont; Mei, Ting

2010-09-01

This document is the Xyce Circuit Simulator developer guide. Xyce has been designed from the 'ground up' to be a SPICE-compatible, distributed memory parallel circuit simulator. While it is in many respects a research code, Xyce is intended to be a production simulator. As such, having software quality engineering (SQE) procedures in place to insure a high level of code quality and robustness are essential. Version control, issue tracking customer support, C++ style guildlines and the Xyce release process are all described. The Xyce Parallel Electronic Simulator has been under development at Sandia since 1999. Historically, Xyce has mostly beenmore » funded by ASC, the original focus of Xyce development has primarily been related to circuits for nuclear weapons. However, this has not been the only focus and it is expected that the project will diversify. Like many ASC projects, Xyce is a group development effort, which involves a number of researchers, engineers, scientists, mathmaticians and computer scientists. In addition to diversity of background, it is to be expected on long term projects for there to be a certain amount of staff turnover, as people move on to different projects. As a result, it is very important that the project maintain high software quality standards. The point of this document is to formally document a number of the software quality practices followed by the Xyce team in one place. Also, it is hoped that this document will be a good source of information for new developers.« less

Implementing LibGuides 2: An Academic Case Study

ERIC Educational Resources Information Center

Duncan, Vicky; Lucky, Shannon; McLean, Jaclyn

2015-01-01

Since 1997, the University of Saskatchewan Library has used "subject pages" to highlight key library resources. When Springshare announced it was launching LibGuides v2, a project team was assembled to transition a mixture of locally produced guides and guides created with the original LibGuides v1 software. This article synthesizes best…

Knoto-ID: a tool to study the entanglement of open protein chains using the concept of knotoids.

PubMed

Dorier, Julien; Goundaroulis, Dimos; Benedetti, Fabrizio; Stasiak, Andrzej

2018-05-02

The backbone of most proteins forms an open curve. To study their entanglement, a common strategy consists in searching for the presence of knots in their backbones using topological invariants. However, this approach requires to close the curve into a loop, which alters the geometry of curve. Knoto-ID allows evaluating the entanglement of open curves without the need to close them, using the recent concept of knotoids which is a generalization of the classical knot theory to open curves. Knoto-ID can analyse the global topology of the full chain as well as the local topology by exhaustively studying all subchains or only determining the knotted core. Knoto-ID permits to localize topologically non-trivial protein folds that are not detected by informatics tools detecting knotted protein folds. Knoto-ID is written in C ++ and includes R (www.R-project.org) scripts to generate plots of projections maps, fingerprint matrices and disk matrices. Knoto-ID is distributed under the GNU General Public License (GPL), version 2 or any later version and is available at https://github.com/sib-swiss/Knoto-ID. A binary distribution for Mac OS X, Linux and Windows with detailed user guide and examples can be obtained from https://www.vital-it.ch/software/Knoto-ID. julien.dorier@sib.swiss.

Production version of the extended NASA-Langley Vortex Lattice FORTRAN computer program. Volume 1: User's guide

NASA Technical Reports Server (NTRS)

Lamar, J. E.; Herbert, H. E.

1982-01-01

The latest production version, MARK IV, of the NASA-Langley vortex lattice computer program is summarized. All viable subcritical aerodynamic features of previous versions were retained. This version extends the previously documented program capabilities to four planforms, 400 panels, and enables the user to obtain vortex-flow aerodynamics on cambered planforms, flowfield properties off the configuration in attached flow, and planform longitudinal load distributions.

75 FR 81157 - Version One Regional Reliability Standard for Transmission Operations

Federal Register 2010, 2011, 2012, 2013, 2014

2010-12-27

... processing software should be filed in native applications or print-to-PDF format and not in a scanned format..., Inc. v. FERC, 564 F.3d 1342 (D.C. Cir. 2009). \\3\\ NERC designates the version number of a Reliability...

Aviation Environmental Design Tool (AEDT): Technical Manual Version 2b, Service Pack 2

DOT National Transportation Integrated Search

2016-05-01

The Federal Aviation Administration, Office of Environment and Energy (FAA-AEE) has developed the Aviation Environmental Design Tool (AEDT) version 2b software system with the support of the following development team: FAA, National Aeronautics and S...

Aviation Environmental Design Tool (AEDT): technical manual, version 2b, service pack 3

DOT National Transportation Integrated Search

2016-05-03

The Federal Aviation Administration, Office of Environment and Energy (FAA-AEE) has developed the Aviation Environmental Design Tool (AEDT) version 2b software system with the support of the following development team: FAA, National Aeronautics and S...

Software Safety Progress in NASA

NASA Technical Reports Server (NTRS)

Radley, Charles F.

1995-01-01

NASA has developed guidelines for development and analysis of safety-critical software. These guidelines have been documented in a Guidebook for Safety Critical Software Development and Analysis. The guidelines represent a practical 'how to' approach, to assist software developers and safety analysts in cost effective methods for software safety. They provide guidance in the implementation of the recent NASA Software Safety Standard NSS-1740.13 which was released as 'Interim' version in June 1994, scheduled for formal adoption late 1995. This paper is a survey of the methods in general use, resulting in the NASA guidelines for safety critical software development and analysis.

Formation of thermal coagulum on multielectrode catheters during phased radiofrequency energy ablation of persistent atrial fibrillation.

PubMed

Debruyne, Philippe; Rossenbacker, Tom; Vankelecom, Bart; Charlier, Filip; Roosen, John; Ector, Bavo; Janssens, Luc

2014-02-01

Radiofrequency ablation (RFA) can unfavorably cause coagulum on the ablation electrode. The aim of this study was to assess this phenomenon on three different multielectrode catheters used to treat persistent atrial fibrillation with duty-cycled RFA. Twenty-six consecutive patients have been treated with the pulmonary vein ablation catheter (PVAC) and the multiarray ablation catheter (MAAC). In 13 patients, additional ablation with the multiarray septal catheter (MASC) has been performed. The multichannel RF generator GENius™ (Medtronic Inc., Minneapolis, MN, USA) independently delivered energy in a bipolar and unipolar mode (ratio of 4/1, 2/1, or 1/1) to any of the electrodes. Versions 14.2, 14.3, and 14.4 of the generator were used. Coagulum presence was determined postablation by careful visual inspection of the catheter electrodes. No coagulum formation was visualized on the PVACs. Coagulum formation was visualized in 59% of the electrodes of the MAACs using a 2/1 mode and the 14.2 software version versus 69% using the 14.4 version and a 2/1 mode (P = 0.7) versus 14% of the electrodes applying a 1/1 ratio and the 14.4 software version (P < 0.001). Duty-cycled RFA in 2/1 bipolar/unipolar ratio generates a substantial frequency of coagulum formation on the multielectrode catheters MAAC and MASC. The use of the 14.4 version of the software to drive the RF generator and the use of energy in the default 1/1 bipolar/unipolar ratio could significantly reduce the frequency of coagulum formation, but so far, could not completely overcome it. The PVAC did not form coagulum, regardless of generator version or energy ratio used. ©2013, The Authors. Journal compilation ©2013 Wiley Periodicals, Inc.