Science.gov

Sample records for gulton industries incorporated

  1. Evaluation program for secondary spacecraft cells: Initial evaluation tests of Gulton Industries, Incorporated, 9.0 ampere-hour nickel-cadmium spacecraft cells with auxiliary electrodes for the small astronomy Satellite (SAS-C)

    NASA Technical Reports Server (NTRS)

    Harkness, J. D.

    1975-01-01

    An evaluation test program was conducted to insure that all cells put into the life cycle program are of high quality by the screening of cells found to have electrolyte leakage, internal shorts, low capacity, or inability of any cell to recover its open-circuit voltage above 1.150 volts during the internal short test. Tests and results are described.

  2. 75 FR 17737 - Industrial Economics, Incorporated; Transfer of Data

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-04-07

    ... AGENCY Industrial Economics, Incorporated; Transfer of Data AGENCY: Environmental Protection Agency (EPA... Economics, Incorporated in accordance with 40 CFR 2.307(h)(3) and 2.308(i)(2). Industrial Economics... enable Industrial Economics, Incorporated to fulfill the obligations of the contract. DATES:...

  3. INCORPORATING INDUSTRIAL ECOLOGY INTO HIERARCHICAL CHEMICAL PROCESS DESIGN

    EPA Science Inventory

    Incorporating Industrial Ecology into Hierarchical Chemical Process Design: Determining Targets for the Exchange of Waste

    The exchange of waste to be used as a recycled feed has long been encouraged by practitioners of industrial ecology. Industrial ecology is a field t...

  4. INCORPORATING INDUSTRIAL ECOLOGY INTO HIERARCHICAL CHEMICAL PROCESS DESIGN

    EPA Science Inventory

    Incorporating Industrial Ecology into Hierarchical Chemical Process Design: Determining Targets for the Exchange of Waste

    The exchange of waste to be used as a recycled feed has long been encouraged by practitioners of industrial ecology. Industrial ecology is a field t...

  5. 75 FR 70235 - Access to Confidential Business Information by Industrial Economics, Incorporated

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-11-17

    ... AGENCY Access to Confidential Business Information by Industrial Economics, Incorporated AGENCY... will authorize its contractor, Industrial Economics, Incorporated (IEc) to access Confidential Business..., Industrial Economics, Incorporated (IEc) will assist the Office of Enforcement and Compliance...

  6. 75 FR 1053 - Access to Confidential Business Information by Industrial Economics, Incorporated

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-01-08

    ... Industrial Economics, Incorporated AGENCY: Environmental Protection Agency (EPA). ACTION: Notice of Access to Data and Request for Comments. SUMMARY: EPA will authorize its contractor, Industrial Economics... Contracts No. EP-W-6-065 and EP07H000213, Industrial Economics, Incorporated (IEc) will assist the Office...

  7. 75 FR 56096 - Access to Confidential Business Information by Industrial Economics Incorporated

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-09-15

    ... From the Federal Register Online via the Government Publishing Office ENVIRONMENTAL PROTECTION AGENCY Access to Confidential Business Information by Industrial Economics Incorporated AGENCY... Economics Incorporated (IEI) of Cambridge, MA, to access information which has been submitted to EPA...

  8. ANALYSIS OF SOLVENT RECOVERED FROM WRIGHT INDUSTRIES, INCORPORATED TESTING

    SciTech Connect

    Poirier, M; Thomas Peters, T; Fernando Fondeur, F; Samuel Fink, S

    2007-01-11

    Washington Savannah River Company (WSRC) began designing and building a Modular Caustic Side Solvent Extraction (CSSX) Unit (MCU) at the Savannah River Site (SRS) to process liquid waste for an interim period. The MCU Project Team conducted testing of the contactors, coalescers, and decanters at Wright Industries, Incorporated (WII) in Nashville, Tennessee. That testing used MCU solvent and simulated SRS dissolved salt. Because of the value of the solvent, the MCU Project wishes to recover it for use in the MCU process in the H-Tank Farm. Following testing, WII recovered approximately 62 gallons of solvent (with entrained aqueous) and shipped it to SRS. The solvent arrived in two stainless steel drums. The MCU Project requested SRNL to analyze the solvent to determine whether it is suitable for use in the MCU Process. SRNL analyzed the solvent for Isopar{reg_sign} L by Gas Chromatography--Mass Spectroscopy (GC-MS), for Modifier and BOBCalixC6 by High Pressure Liquid Chromatography (HPLC), and for Isopar{reg_sign} L-to-Modifier ratio by Fourier-Transform Infrared (FTIR) spectroscopy. They also measured the solvent density gravimetrically and used that measurement to calculate the Isopar{reg_sign} L and Modifier concentration. The conclusions from this work are: (1) The constituents of the used WII solvent are collectively low in Isopar{reg_sign} L, most likely due to evaporation. This can be easily corrected through the addition of Isopar{reg_sign} L. (2) Compared to a sample of the WII Partial Solvent (without BOBCalixC6) archived before transfer to WII, the Reworked WII Solvent showed a significant improvement (i.e., nearly doubling) in the dispersion numbers for tests with simulated salt solution and with strip acid. Hence, the presence of the plasticizer impurity has no detrimental impact on phase separation. While there are no previous dispersion tests using the exact same materials, the results seem to indicate that the washing of the solvent gives a

  9. Immigrant incorporation in the garment industry of Los Angeles.

    PubMed

    Light, I; Bernard, R B; Kim, R

    1999-01-01

    This study expands immigrant social network theory and examined employment patterns in the garment industry in Los Angeles, California, among Latino workers employed by Asian immigrant entrepreneurs. The study determined that a large percentage of immigrant employees found their jobs through the immigrant economy. Entrepreneurship increased the supply of local jobs and expanded the economy at destination at no expense to natives. Immigrant entrepreneurs bought firms from nonimmigrant owners or started new ones with an immigrant labor supply. Massey's index is flawed due to its exclusion of the role of entrepreneurs. Migration networks facilitate entrepreneurship, but some ethnic groups have fewer entrepreneurs, such as Mexicans and Central Americans. A 1993 Los Angeles survey identified 3642 garment factories in its county. Mean employment was 27.1 persons. The garment industry was the 4th largest industry in the area in 1996, with 98,700 employees. It represented 6% of all wage and salary employees in the City and 5.5% of the immigrant labor force in the County in 1990. 93% of garment workers in 1990 were immigrants. It is estimated that 51% of garment factory owners were Asians; most employees were Latinos. Census figures on sewing machine operators indicated 47.3% of owners were Whites and 42.45 were Asians. 53.3% of employees were other ethnic groups, 14.5% were Asians, and 32.2% were Whites. It is estimated that 47.2% of total employment was due to the immigration economy. 71.5% of the total employment in the garment industry was in the immigrant sector.

  10. Tips and Tricks of Incorporating Industry Standards into a Library Collection

    SciTech Connect

    Abbott, Jennifer; Sandberg, Tami

    2015-11-05

    Professional literature on the incorporation of industry standards into a library collection is somewhat limited. The objective of this presentation is to discuss the intricate details of acquiring, managing, and delivering electronic industry standards to library patrons in a seamless manner. Lessons learned regarding vendor selection and license agreements will also be discussed. Results from a survey administer at the National Renewable Energy Laboratory will be used to analyze how collection policies can properly be developed to incorporate industry standards into a library setting. The key points of acquisition decisions, avoidance of liability issues, and cost will be addressed.

  11. 29 CFR Appendix A to Part 1926 - Designations for General Industry Standards Incorporated Into Body of Construction Standards

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... REGULATIONS FOR CONSTRUCTION Pt. 1926, App. A Appendix A to Part 1926—Designations for General Industry Standards Incorporated Into Body of Construction Standards New Designations for General Industry Standards... 29 Labor 8 2013-07-01 2013-07-01 false Designations for General Industry Standards Incorporated...

  12. 29 CFR Appendix A to Part 1926 - Designations for General Industry Standards Incorporated Into Body of Construction Standards

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... REGULATIONS FOR CONSTRUCTION Pt. 1926, App. A Appendix A to Part 1926—Designations for General Industry Standards Incorporated Into Body of Construction Standards New Designations for General Industry Standards... 29 Labor 8 2014-07-01 2014-07-01 false Designations for General Industry Standards Incorporated...

  13. 29 CFR Appendix A to Part 1926 - Designations for General Industry Standards Incorporated Into Body of Construction Standards

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... REGULATIONS FOR CONSTRUCTION Pt. 1926, App. A Appendix A to Part 1926—Designations for General Industry Standards Incorporated Into Body of Construction Standards New Designations for General Industry Standards... 29 Labor 8 2012-07-01 2012-07-01 false Designations for General Industry Standards Incorporated...

  14. 33 CFR 148.722 - Should the construction plan incorporate best available technology and recommended industry...

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... 33 Navigation and Navigable Waters 2 2014-07-01 2014-07-01 false Should the construction plan incorporate best available technology and recommended industry practices? 148.722 Section 148.722 Navigation... DEEPWATER PORTS: GENERAL Environmental Review Criteria for Deepwater Ports § 148.722 Should the construction...

  15. 33 CFR 148.722 - Should the construction plan incorporate best available technology and recommended industry...

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... 33 Navigation and Navigable Waters 2 2013-07-01 2013-07-01 false Should the construction plan incorporate best available technology and recommended industry practices? 148.722 Section 148.722 Navigation... DEEPWATER PORTS: GENERAL Environmental Review Criteria for Deepwater Ports § 148.722 Should the construction...

  16. 33 CFR 148.722 - Should the construction plan incorporate best available technology and recommended industry...

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 33 Navigation and Navigable Waters 2 2010-07-01 2010-07-01 false Should the construction plan incorporate best available technology and recommended industry practices? 148.722 Section 148.722 Navigation... DEEPWATER PORTS: GENERAL Environmental Review Criteria for Deepwater Ports § 148.722 Should the construction...

  17. 33 CFR 148.722 - Should the construction plan incorporate best available technology and recommended industry...

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 33 Navigation and Navigable Waters 2 2011-07-01 2011-07-01 false Should the construction plan incorporate best available technology and recommended industry practices? 148.722 Section 148.722 Navigation... DEEPWATER PORTS: GENERAL Environmental Review Criteria for Deepwater Ports § 148.722 Should the construction...

  18. 33 CFR 148.722 - Should the construction plan incorporate best available technology and recommended industry...

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... 33 Navigation and Navigable Waters 2 2012-07-01 2012-07-01 false Should the construction plan incorporate best available technology and recommended industry practices? 148.722 Section 148.722 Navigation... DEEPWATER PORTS: GENERAL Environmental Review Criteria for Deepwater Ports § 148.722 Should the construction...

  19. Incorporation of effluent trading in the city of Millville, NJ industrial pretreatment program

    SciTech Connect

    Taylor, S.T.; Dimino, M.A.; Tarasevich, A.

    1998-07-01

    The City of Millville, NJ recently updated its sewer use ordinance to incorporate technically defensible effluent limitations for industrial users of their POTW. These limitations were designed to protect the POTW from the potential inhibitory effects of pollutants in the waste stream, to protect the quality of the biosolids generated at the POTW, and to protect the quality of effluent discharged by the POTW. Along with these technically defensible limits, the City also developed a pollutant trading program which allows industries to set up agreements, under the City's supervision, which affect the allocation of pollutant loadings.

  20. Incorporating unnatural amino acids to engineer biocatalysts for industrial bioprocess applications.

    PubMed

    Ravikumar, Yuvaraj; Nadarajan, Saravanan Prabhu; Hyeon Yoo, Tae; Lee, Chong-Soon; Yun, Hyungdon

    2015-12-01

    The bioprocess engineering with biocatalysts broadly spans its development and actual application of enzymes in an industrial context. Recently, both the use of bioprocess engineering and the development and employment of enzyme engineering techniques have been increasing rapidly. Importantly, engineering techniques that incorporate unnatural amino acids (UAAs) in vivo has begun to produce enzymes with greater stability and altered catalytic properties. Despite the growth of this technique, its potential value in bioprocess applications remains to be fully exploited. In this review, we explore the methodologies involved in UAA incorporation as well as ways to synthesize these UAAs. In addition, we summarize recent efforts to increase the yield of UAA engineered proteins in Escherichia coli and also the application of this tool in enzyme engineering. Furthermore, this protein engineering tool based on the incorporation of UAA can be used to develop immobilized enzymes that are ideal for bioprocess applications. Considering the potential of this tool and by exploiting these engineered enzymes, we expect the field of bioprocess engineering to open up new opportunities for biocatalysis in the near future.

  1. A land use regression model incorporating data on industrial point source pollution.

    PubMed

    Chen, Li; Wang, Yuming; Li, Peiwu; Ji, Yaqin; Kong, Shaofei; Li, Zhiyong; Bai, Zhipeng

    2012-01-01

    Advancing the understanding of the spatial aspects of air pollution in the city regional environment is an area where improved methods can be of great benefit to exposure assessment and policy support. We created land use regression (LUR) models for SO2, NO2 and PM10 for Tianjin, China. Traffic volumes, road networks, land use data, population density, meteorological conditions, physical conditions and satellite-derived greenness, brightness and wetness were used for predicting SO2, NO2 and PM10 concentrations. We incorporated data on industrial point sources to improve LUR model performance. In order to consider the impact of different sources, we calculated the PSIndex, LSIndex and area of different land use types (agricultural land, industrial land, commercial land, residential land, green space and water area) within different buffer radii (1 to 20 km). This method makes up for the lack of consideration of source impact based on the LUR model. Remote sensing-derived variables were significantly correlated with gaseous pollutant concentrations such as SO2 and NO2. R2 values of the multiple linear regression equations for SO2, NO2 and PM10 were 0.78, 0.89 and 0.84, respectively, and the RMSE values were 0.32, 0.18 and 0.21, respectively. Model predictions at validation monitoring sites went well with predictions generally within 15% of measured values. Compared to the relationship between dependent variables and simple variables (such as traffic variables or meteorological condition variables), the relationship between dependent variables and integrated variables was more consistent with a linear relationship. Such integration has a discernable influence on both the overall model prediction and health effects assessment on the spatial distribution of air pollution in the city region.

  2. Impact of fresh organic matter incorporation on PAH fate in a contaminated industrial soil.

    PubMed

    Pernot, Audrey; Ouvrard, Stéphanie; Leglize, Pierre; Watteau, Françoise; Derrien, Delphine; Lorgeoux, Catherine; Mansuy-Huault, Laurence; Faure, Pierre

    2014-11-01

    The impacts of fresh organic matter (OM) incorporation in an industrial PAH-contaminated soil on its structure and contaminant concentrations (available and total) were monitored. A control soil and a soil amended with the equivalent of 10 years maize residue input were incubated in laboratory-controlled conditions over 15 months. The structure of the amended soil showed an aggregation process trend which is attributable to (i) the enhanced microbial activity resulting from fresh OM input itself and (ii) the fresh OM and its degradation products. Initially the added organic matter was evenly distributed among all granulodensimetric fractions, and then rapidly degraded in the sand fraction, while stabilizing and accumulating in the silts. PAH degradation remained slight, despite the enhanced microbial biomass activity, which was similar to kinetics of the turnover rate of OM in an uncontaminated soil. The silts stabilized the anthropogenic OM and associated PAH. The addition of fresh OM tended to contribute to this stabilization process. Thus, in a context of plant growth on this soil two opposing processes might occur: rhizodegradation of the available contaminant and enhanced stabilization of the less available fraction due to carbon input. Copyright © 2014 Elsevier B.V. All rights reserved.

  3. 78 FR 13686 - Draft Guidance for Industry and Review Staff on Pediatric Information Incorporated Into Human...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-02-28

    ... HUMAN SERVICES Food and Drug Administration Draft Guidance for Industry and Review Staff on Pediatric... announcing the availability of a draft guidance for industry and review staff entitled ``Pediatric... is intended to assist applicants and FDA review staff in making decisions about the placement and...

  4. Infrared analysis of clay bricks incorporated with spent shea waste from the shea butter industry.

    PubMed

    Adazabra, A N; Viruthagiri, G; Shanmugam, N

    2017-04-15

    The peculiar challenge of effective disposing abundant spent shea waste and the excellent compositional variation tolerance of clay material offered an impetus to examine the incorporation of spent shea waste into clay material as an eco-friendly disposal route in making clay bricks. For this purpose, the chemical constituent, mineralogical compositions and thermal behavior of both clay material and spent shea waste were initially characterized from which modelled brick specimens incorporating 5-20 wt% of the waste into the clay material were prepared. The clay material showed high proportions of SiO2 (52.97 wt%) and Al2O3 (27.10 wt%) indicating their rich kaolinitic content: whereas, the inert nature of spent shea waste was exhibited by their low oxide content. The striking similarities in infrared absorption bands of pristine clay material and clay materials incorporated with 15 wt% of spent shea waste showed that the waste incorporation had no impact on bond formation of the clay bricks. Potential performance benefits of developing bricks from clay material incorporated with spent shea waste included improved fluxing agents, economic sintering and making of sustainable bricks. Consequently, the analytical results authenticate the incorporation of spent shea waste into clay materials for various desired benefits aside being an environmental correct route of its disposal.

  5. Incorporating GIS data into an agent-based model to support planning policy making for the development of creative industries

    NASA Astrophysics Data System (ADS)

    Liu, Helin; Silva, Elisabete A.; Wang, Qian

    2016-07-01

    This paper presents an extension to the agent-based model "Creative Industries Development-Urban Spatial Structure Transformation" by incorporating GIS data. Three agent classes, creative firms, creative workers and urban government, are considered in the model, and the spatial environment represents a set of GIS data layers (i.e. road network, key housing areas, land use). With the goal to facilitate urban policy makers to draw up policies locally and optimise the land use assignment in order to support the development of creative industries, the improved model exhibited its capacity to assist the policy makers conducting experiments and simulating different policy scenarios to see the corresponding dynamics of the spatial distributions of creative firms and creative workers across time within a city/district. The spatiotemporal graphs and maps record the simulation results and can be used as a reference by the policy makers to adjust land use plans adaptively at different stages of the creative industries' development process.

  6. New ceramics incorporated with industrial by-products as pore formers for sorption of toxic chromium from aqueous media

    NASA Astrophysics Data System (ADS)

    Domopoulou, Asimina; Spiliotis, Xenofon; Baklavaridis, Apostolos; Papapolymerou, George; Karayannis, Vayos

    2015-04-01

    The incorporation of secondary resources including various industrial wastes as pore-forming agents into clayey raw material mixtures for the development of tailored porous ceramic microstructures is currently of increasing interest. In the present research, sintered ceramic compacts were developed incorporated with industrial solid by-products as pore formers, and then used as new sorbents for chromium removal from aqueous media. The microstructures obtained were characterized through X-ray diffraction (XRD) analysis as well as scanning electron microscopy (SEM) coupled with energy dispersive X-ray spectrometry (EDX). Sorption potential of chromium from synthetic solutions on the porous ceramics was studied by static adsorption experiments as a function of the pore-former percentage in the ceramic matrix as well as the initial heavy metal (chromium) concentration, solution pH and temperature. Kinetic studies were conducted and adsorption isotherms of chromium were determined using the Langmuir equation. Preliminary experimental results concerning the adsorption characteristics of chromium on the ceramic materials produced appear encouraging for their possible beneficial use as new sorbents for the removal of toxic chromium from aqueous media. Keywords: sorbents, ceramics, industrial solid by-products, pore former, chromium. Acknowledgements: This research has been co-financed by the European Union (European Social Fund - ESF) and Greek national funds through the Operational Program "Education and Lifelong Learning" of the National Strategic Reference Framework (NSRF) - Research Funding Program ARCHIMEDES III: Investing in knowledge society through the European Social Fund.

  7. New ceramics incorporated with industrial by-products as pore formers for sorption of toxic chromium from aqueous media

    NASA Astrophysics Data System (ADS)

    Domopoulou, Artemi

    2015-04-01

    The incorporation of secondary resources including various industrial wastes as pore-forming agents into clayey raw material mixtures for the development of tailored porous ceramic microstructures is currently of increasing interest. In the present research, sintered ceramic compacts were developed incorporated with industrial solid by-products as pore formers, and then used as new sorbents for chromium removal from aqueous media. The microstructures obtained were characterized through X-ray diffraction (XRD) analysis as well as scanning electron microscopy (SEM) coupled with energy dispersive X-ray spectrometry (EDX). Sorption potential of chromium from synthetic solutions on the porous ceramics was studied by static adsorption experiments as a function of the pore-former percentage in the ceramic matrix as well as the initial heavy metal (chromium) concentration, solution pH and temperature. Kinetic studies were conducted and adsorption isotherms of chromium were determined using the Langmuir equation. Preliminary experimental results concerning the adsorption characteristics of chromium on the ceramic materials produced appear encouraging for their possible beneficial use as new sorbents for the removal of toxic chromium from aqueous media. Keywords: sorbents, ceramics, industrial solid by-products, pore-former, chromium. Acknowledgements: This research has been co-financed by the European Union (European Social Fund - ESF) and Greek national funds through the Operational Program "Education and Lifelong Learning" of the National Strategic Reference Framework (NSRF) - Research Funding Program ARCHIMEDES III: Investing in knowledge society through the European Social Fund.

  8. Subregional Training Seminar on the Incorporation of Environmental Education Into Industrial Education for the Caribbean (Kingston, Jamaica, May 9-16, 1988). Final Report.

    ERIC Educational Resources Information Center

    College of Arts, Science and Technology, Kingston (Jamaica).

    This seminar was organized to: (1) study the place and need of environmental education (EE) in the context of technical and vocational education; (2) develop strategies for the incorporation of EE into the curriculum and teacher-training for pre-university industrial schools; (3) develop prototype EE materials for incorporation into the curriculum…

  9. A methodology to incorporate life cycle analysis and the triple bottom line mechanism for sustainable management of industrial enterprises

    NASA Astrophysics Data System (ADS)

    Wang, Ling; Lin, Li

    2004-02-01

    Since 1970"s, the environmental protection movement has challenged industries to increase their investment in Environmentally Conscious Manufacturing (ECM) techniques and management tools. Social considerations for global citizens and their descendants also motivated the examination on the complex issues of sustainable development beyond the immediate economic impact. Consequently, industrial enterprises have started to understand sustainable development in considering the Triple Bottom Line (TBL): economic prosperity, environmental quality and social justice. For the management, however, a lack of systematic ECM methodologies hinders their effort in planning, evaluating, reporting and auditing of sustainability. To address this critical need, this research develops a framework of a sustainable management system by incorporating a Life Cycle Analysis (LCA) of industrial operations with the TBL mechanism. A TBL metric system with seven sets of indices for the TBL elements and their complex relations is identified for the comprehensive evaluation of a company"s sustainability performance. Utilities of the TBL indices are estimated to represent the views of various stakeholders, including the company, investors, employees and the society at large. Costs of these indices are also captured to reflect the company"s effort in meeting the utilities. An optimization model is formulated to maximize the economic, environmental and social benefits by the company"s effort in developing sustainable strategies. To promote environmental and social consciousness, the methodology can significantly facilitate management decisions by its capabilities of including "non-business" values and external costs that the company has not contemplated before.

  10. Industry-wide studies report of walk-through survey of Schilling, McCormick and Company, Incorporated, Salinas, California

    SciTech Connect

    Morawetz, J.; Steenland, K.

    1986-11-01

    A walk-through survey was conducted to determine the suitability of including Schilling, McCormick and Company, Salinas, California, in an industry-wide mortality and industrial hygiene study concerning workers with potential exposure to ethylene oxide. At this facility, spices are ground, milled, blended, mixed and filled for various customers. Et0 is used to treat unprocessed poppy seeds and Brazilian pepper as they arrive at the facility. Other spices are treated when necessary. A review of personal data on exposure levels showed that jobs where workers are exposed to 1 part per million or greater on the average include bottle dumper, receiving clerk, safety supervisor, forklift driver at warehouse, forklift driver at receiving, and Et0 chamber operator. Medical, industrial hygiene, and safety programs in effect at the facility were examined. The authors concluded that this facility meets the requirements for entry into the larger study; however, due to the limited number of person years (3000) at this facility compared to others in the study, and the cost of data collection and coding, the decision was made not to include this facility.

  11. Incorporation of Fines and Noble Metals into HLW Borosilicate Glass: Industrial Responses to a Challenging Issue - 13056

    SciTech Connect

    Chauvin, E.; Chouard, N.; Prod'homme, A.; Boudot, E.; Gruber, Ph.; Pinet, O.; Grosman, R.

    2013-07-01

    During the early stages of spent fuel reprocessing, the fuel rods are cut and dissolved to separate the solid metallic parts of the rods (cladding and end pieces) from the radioactive nitric acid solution containing uranium, plutonium, minor actinides and fission products (FP). This solution contains small, solid particles produced during the shearing process. These small particles, known as 'fines', are then separated from the liquid by centrifugation. At the La Hague plant in France, the fines solution is transferred to the vitrification facilities to be incorporated into borosilicate glass along with the highly radioactive FP solution. These fines are also composed of Zr, Mo and other noble metals (i.e. Ru, Pd, Rh, etc.) that are added before vitrification to the the FP solution that already contained noble metals. As noble metals has the potential to modify the glass properties (including viscosity, electrical conductivity, etc.) and to be affected by sedimentation inside the melter, their behavior in borosilicate glass has been studied in depth over the years by the AREVA and CEA teams which are now working together in the Joint Vitrification Laboratory (LCV). At La Hague, the R7 vitrification facility started operation in 1989 using induction-heated metallic melter technology and was quickly followed by the T7 vitrification facility in 1992. Incorporating the fines into glass has been a challenge since operation began, and has given rise to several R and D studies resulting in a number of technological enhancements to improve the mixing capability of the melters (multiple bubbling technology and mechanical stirring in the mid-90's). Nowadays, the incorporation of fines into R7T7 glass is well understood and process adaptations are deployed in the La Hague facilities to increase the operating flexibility of the melters. The paper will briefly describe the fines production mechanisms, give details of the resulting fines characteristics, explain how the metallic

  12. Incorporation of whey permeate, a dairy effluent, in ethanol fermentation to provide a zero waste solution for the dairy industry.

    PubMed

    Parashar, Archana; Jin, Yiqiong; Mason, Beth; Chae, Michael; Bressler, David C

    2016-03-01

    This study proposes a novel alternative for utilization of whey permeate, a by-product stream from the dairy industry, in wheat fermentation for ethanol production using Saccharomyces cerevisiae. Whey permeates were hydrolyzed using enzymes to release fermentable sugars. Hydrolyzed whey permeates were integrated into wheat fermentation as a co-substrate or to partially replace process water. Cold starch hydrolysis-based simultaneous saccharification and fermentation was done as per the current industrial protocol for commercial wheat-to-ethanol production. Ethanol production was not affected; ethanol yield efficiency did not change when up to 10% of process water was replaced. Lactic acid bacteria in whey permeate did not negatively affect the co-fermentation or reduce ethanol yield. Whey permeate could be effectively stored for up to 4 wk at 4 °C with little change in lactose and lactic acid content. Considering the global abundance and nutrient value of whey permeate, the proposed strategy could improve economics of the dairy and biofuel sectors, and reduce environmental pollution. Furthermore, our research may be applied to fermentation strategies designed to produce value-added products other than ethanol. Copyright © 2016 American Dairy Science Association. Published by Elsevier Inc. All rights reserved.

  13. Industry

    SciTech Connect

    Bernstein, Lenny; Roy, Joyashree; Delhotal, K. Casey; Harnisch, Jochen; Matsuhashi, Ryuji; Price, Lynn; Tanaka, Kanako; Worrell, Ernst; Yamba, Francis; Fengqi, Zhou; de la Rue du Can, Stephane; Gielen, Dolf; Joosen, Suzanne; Konar, Manaswita; Matysek, Anna; Miner, Reid; Okazaki, Teruo; Sanders, Johan; Sheinbaum Parado, Claudia

    2007-12-01

    This chapter addresses past, ongoing, and short (to 2010) and medium-term (to 2030) future actions that can be taken to mitigate GHG emissions from the manufacturing and process industries. Globally, and in most countries, CO{sub 2} accounts for more than 90% of CO{sub 2}-eq GHG emissions from the industrial sector (Price et al., 2006; US EPA, 2006b). These CO{sub 2} emissions arise from three sources: (1) the use of fossil fuels for energy, either directly by industry for heat and power generation or indirectly in the generation of purchased electricity and steam; (2) non-energy uses of fossil fuels in chemical processing and metal smelting; and (3) non-fossil fuel sources, for example cement and lime manufacture. Industrial processes also emit other GHGs, e.g.: (1) Nitrous oxide (N{sub 2}O) is emitted as a byproduct of adipic acid, nitric acid and caprolactam production; (2) HFC-23 is emitted as a byproduct of HCFC-22 production, a refrigerant, and also used in fluoroplastics manufacture; (3) Perfluorocarbons (PFCs) are emitted as byproducts of aluminium smelting and in semiconductor manufacture; (4) Sulphur hexafluoride (SF{sub 6}) is emitted in the manufacture, use and, decommissioning of gas insulated electrical switchgear, during the production of flat screen panels and semiconductors, from magnesium die casting and other industrial applications; (5) Methane (CH{sub 4}) is emitted as a byproduct of some chemical processes; and (6) CH{sub 4} and N{sub 2}O can be emitted by food industry waste streams. Many GHG emission mitigation options have been developed for the industrial sector. They fall into three categories: operating procedures, sector-wide technologies and process-specific technologies. A sampling of these options is discussed in Sections 7.2-7.4. The short- and medium-term potential for and cost of all classes of options are discussed in Section 7.5, barriers to the application of these options are addressed in Section 7.6 and the implication of

  14. Cargill Incorporated

    EPA Pesticide Factsheets

    Cargill, Incorporated, 518 East Fourth Street, Watkins Glen, New York 14891 has applied to the U.S. Environmental Protection Agency (EPA) under the provisions of the Safe Drinking Water Act, 42 U.S.C. 300f et. seq (the Act), for a new Underground Injection

  15. 40 CFR 63.3003 - Incorporation by reference.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... referred to at § 63.2984: chapters 3 and 5 of “Industrial Ventilation: A Manual of Recommended Practice,” American Conference of Governmental Industrial Hygienists, (23rd edition, 1998). The incorporation by... Industrial Hygienists (ACGIH), 1330 Kemper Meadow Drive, Cincinnati, OH 45240, telephone number (513)...

  16. 40 CFR 63.3003 - Incorporation by reference.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... referred to at § 63.2984: chapters 3 and 5 of “Industrial Ventilation: A Manual of Recommended Practice,” American Conference of Governmental Industrial Hygienists, (23rd edition, 1998). The incorporation by... Industrial Hygienists (ACGIH), 1330 Kemper Meadow Drive, Cincinnati, OH 45240, telephone number (513)...

  17. Bearings Incorporating Deadband Rollers

    NASA Technical Reports Server (NTRS)

    Gualtieri, Guy V.

    1996-01-01

    Bearings in high-pressure turbopump redesigned to incorporate rollers allowing limited axial motion within small deadband. Does not permit radial deadband motion. Axial deadband motion used for rotor-thrust-balance control. Design eliminates some nonlinearities in dynamics of pump rotor and assists in suppressing vibrations at harmonics of frequency of rotation.

  18. Industrial diamond

    USGS Publications Warehouse

    Olson, D.W.

    2001-01-01

    An overview of the industrial diamond industry is provided. More than 90 percent of the industrial diamond consumed in the U.S. and the rest of the world is manufactured diamond. Ireland, Japan, Russia, and the U.S. produce 75 percent of the global industrial diamond output. In 2000, the U.S. was the largest market for industrial diamond. Industrial diamond applications, prices for industrial diamonds, imports and exports of industrial diamonds, the National Defense Stockpile of industrial diamonds, and the outlook for the industrial diamond market are discussed.

  19. Using Extension Fieldwork to Incorporate Experiential Learning into University Coursework

    ERIC Educational Resources Information Center

    Curtis, Kynda; Mahon, Jennifer

    2010-01-01

    This article presents a strategy for incorporating experiential learning into university coursework through the use of Extension fieldwork projects. In this case, undergraduate agribusiness management students construct business plans for primary agricultural industries and proposed new industries, such as food processing. Results of the study…

  20. Zinc Incorporation Into Hydroxylapatite

    SciTech Connect

    Tang, Y.; Chappell, H; Dove, M; Reeder, R; Lee, Y

    2009-01-01

    By theoretical modeling and X-ray absorption spectroscopy, the local coordination structure of Zn incorporated into hydroxylapatite was examined. Density function theory (DFT) calculations show that Zn favors the Ca2 site over the Ca1 site, and favors tetrahedral coordination. X-ray absorption near edge structure (XANES) spectroscopy results suggest one dominant coordination environment for the incorporated Zn, and no evidence was observed for other Zn-containing phases. Extended X-ray absorption fine structure (EXAFS) fitting of the synthetic samples confirms that Zn occurs in tetrahedral coordination, with two P shells at 2.85-3.07 {angstrom}, and two higher Ca shells at 3.71-4.02 {angstrom}. These fit results are consistent with the most favored DFT model for Zn substitution in the Ca2 site.

  1. Industrial garnet

    USGS Publications Warehouse

    Olson, D.W.

    2001-01-01

    A general overview of the industrial garnet industry is provided. About 20 percent of global industrial garnet production takes place in the U.S. During 2000, an estimated 300 kt of industrial garnets were produced worldwide. The U.S. is the world's largest consumer of industrial garnet, consuming 56.9 kt in 2000.

  2. Industrial diamond

    USGS Publications Warehouse

    Olson, D.W.

    2003-01-01

    Statistics on the production, consumption, cost, trade, and government stockpile of natural and synthetic industrial diamond are provided. The outlook for the industrial diamond market is also considered.

  3. DISTRIBUTED AMPLIFIER INCORPORATING FEEDBACK

    DOEpatents

    Bell, P.R. Jr.

    1958-10-21

    An improved distributed amplifier system employing feedback for stabilization is presented. In accordance with the disclosed invention, a signal to be amplified is applled to one end of a suitable terminated grid transmission line. At intervals along the transmission line, the signal is fed to stable, resistance-capacitance coupled amplifiers incorporating feedback loops therein. The output current from each amplifier is passed through an additional tube to minimize the electrostatic capacitance between the tube elements of the last stage of the amplifier, and fed to appropriate points on an output transmission line, similar to the grid line, but terminated at the opposite (input) end. The output taken from the unterminated end of the plate transmission line is proportional to the input voltage impressed upon the grid line.

  4. Chromatography in Industry

    NASA Astrophysics Data System (ADS)

    Schoenmakers, Peter

    2009-07-01

    This review focuses on the chromatography research that has been carried out within industry or in close cooperation with industry and that has been reported in the scientific literature between 2006 and mid-2008. Companies in the health care sector, such as pharmaceutical and biotechnology companies, are the largest contributors. Industrial research seems to take place in an open environment in cooperation with academia, peer companies, and institutions. Industry appears ready to embrace new technologies as they emerge, but they focus strongly on making chromatography work robustly, reliably, rapidly, and automatically. “Hyphenated” systems that incorporate on-line sample-preparation techniques and mass-spectrometric detection are the rule rather than the exception. Various multidimensional separation methods are finding numerous applications. Strategies aimed at speeding up the development of new chromatographic methods remain the focus of attention. Also, there is a clear trend toward exploring chromatographic methods for parallel processing along with other strategies for high-throughput analysis.

  5. Industry Employment

    ERIC Educational Resources Information Center

    Occupational Outlook Quarterly, 2012

    2012-01-01

    This article illustrates projected employment change by industry and industry sector over 2010-20 decade. Workers are grouped into an industry according to the type of good produced or service provided by the establishment for which they work. Industry employment projections are shown in terms of numeric change (growth or decline in the total…

  6. Industrial Minerals

    ERIC Educational Resources Information Center

    Bradbury, James C.

    1978-01-01

    The past year is seen as not particularly good for industrial minerals and for industry in general. Environmental concerns continued to trouble the industry with unacceptable asbestos concentrations and chlorofluorocarbon effects on ozone. A halting U.S. economy also affected industrial progress. (MA)

  7. Industrial diamond

    USGS Publications Warehouse

    Olson, D.W.

    2000-01-01

    Part of the 1999 Industrial Minerals Review. A review of the state of the global industrial diamond industry in 1999 is presented. World consumption of industrial diamond has increased annually in recent years, with an estimated 500 million carats valued between $650 million and $800 million consumed in 1999. In 1999, the U.S. was the world's largest market for industrial diamond and was also one of the world's main producers; the others were Ireland, Russia, and South Africa. Uses of industrial diamonds are discussed, and prices of natural and synthetic industrial diamond are reported.

  8. Nepal CRS project incorporates.

    PubMed

    1983-01-01

    The Nepal Contraceptive Retail Sales (CRS) Project, 5 years after lauching product sales in June 1978, incorporated as a private, nonprofit company under Nepalese management. The transition was finalized in August 1983. The Company will work through a cooperative agreement with USAID/Kathmandu to complement the national family planning goals as the program continues to provide comtraceptives through retail channels at subsidized prices. Company objectives include: increase contraceptive sales by at least 15% per year; make CRS cost effective and move towards self sufficiency; and explore the possibility of marketing noncontraceptive health products to improve primary health care. After only5 years the program can point to some impressive successes. The number of retial shops selling family planning products increased from 100 in 1978 to over 8000, extending CRS product availability to 66 of the country's 75 districts. Retail sales have climbed dramatically in the 5-year period, from Rs 46,817 in 1978 to Rs 271,039 in 1982. Sales in terms of couple year protection CYP) have grown to 24,451 CYP(1982), a 36% increase over 1980 CYP. Since the beginning of the CRS marketing program, total distribution of contraceptives--through both CRS and the Family Planning Maternal and Child Haelth (FP/MCH) Project--has been increasing. While the FP/MCH program remains the largest distributor,contribution of CRS Products is increasing, indicating that CRS is creating new product acceptors. CRS market share in 1982 was 43% for condoms and 16% for oral contraceptives (OCs). CRS markets 5 products which are subsidized in order to be affordable to consumers as well as attractive to sellers. The initial products launched in June 1978 were Gulaf standard dose OCs and Dhaal lubricated colored condoms. A less expensive lubricates, plain Suki-Dhaal condom was introduced in June 1980 in an attempt to reach poorer rural populations, but rural distribution costs are excessive and Suki

  9. Incorporation of Waste Ceramic Blocks in Structural Ceramics

    NASA Astrophysics Data System (ADS)

    de Oliveira, Orley Magalhães; das Graças da Silva-Valenzuela, Maria; Andrade, Christiano Gianesi Bastos; Junior, Antonio Hortêncio Munhoz; Valenzuela-Díaz, Francisco Rolando

    In Brazil, Ceramics Industries produce bricks and ceramic tiles in practically all the country. In the southwestern region of Bahia are located some of these industries. A considerable proportion of the material produced do not pass the quality control for not having a uniform visual appearance or have cracks. These burned pieces are generally discarded, resulting in a big quantity of waste. The objective of this work is the characterization of this industrial waste and thus consign them to other industrial applications. Our results demonstrate that the burned waste have potential to be used for incorporation in common clay for structural ceramics, thereby avoiding its disposal in nature and reducing this environmental liability. Experimental bodies were tested with different quantities of waste. The common clay and the burned waste were characterized by XRD, TG/DTA, and SEM. The burned specimens were tested for mechanical strength, water absorption, bulk density, and apparent porosity. An incorporation of 10% of waste furnished the best results.

  10. Industrial diamond

    USGS Publications Warehouse

    Olson, D.W.

    2004-01-01

    Part of the 2003 industrial minerals review. Supply and demand data for industrial diamond are provided. Topics discussed are consumption, prices, imports and exports, government stockpiles, and the outlook for 2004.

  11. Industrial diamond

    USGS Publications Warehouse

    Olson, D.W.

    2012-01-01

    Estimated 2011 world production of natural and synthetic industrial diamond was about 4.45 billion carats. During 2011, natural industrial diamonds were produced in more than 20 countries, and synthetic industrial diamond was produced in at least 13 countries. About 98 percent of the combined natural and synthetic global output was produced in China, Ireland, Japan, Russia, South Africa and the United States. China is the world's leading producer of synthetic industrial diamond followed by Russia and the United States.

  12. Industrial diamond

    USGS Publications Warehouse

    Olson, D.W.

    2011-01-01

    Estimated world production of natural and synthetic industrial diamond was about 4.44 billion carats in 2010. Natural industrial diamond deposits have been found in more than 35 countries, and synthetic industrial diamond is produced in at least 15 countries.

  13. Industrial diamond

    USGS Publications Warehouse

    Olson, D.W.

    2006-01-01

    In 2005, estimated world production of natural and synthetic industrial diamond was 630 million carats. Natural industrial diamond deposits were found in more than 35 countries. Synthetic industrial diamond is produced in at least 15 countries. More than 81% of the combined natural and synthetic global output was produced in Ireland, Japan, Russia, South Africa and the United States.

  14. Industrial Microbiology.

    ERIC Educational Resources Information Center

    Demain, Arnold L.; Solomon, Nadine A.

    1981-01-01

    Presents an overview of the field of industrial microbiology, providing historical backgrounds of scientific discoveries in the field and descriptions of industrially important microorganisms. Applied research in industry is also detailed, with mention of gene amplification, DNA recombination, pharmaceutical approaches, and detoxification and…

  15. Industrial Microbiology.

    ERIC Educational Resources Information Center

    Demain, Arnold L.; Solomon, Nadine A.

    1981-01-01

    Presents an overview of the field of industrial microbiology, providing historical backgrounds of scientific discoveries in the field and descriptions of industrially important microorganisms. Applied research in industry is also detailed, with mention of gene amplification, DNA recombination, pharmaceutical approaches, and detoxification and…

  16. Industry Employment

    ERIC Educational Resources Information Center

    Occupational Outlook Quarterly, 2010

    2010-01-01

    This article illustrates projected employment change from an industry perspective over the 2008-2018 decade. Workers are grouped into an industry according to the type of good produced or service provided by the establishment in which they work. Industry employment projections are shown in terms of numeric change (growth or decline in the total…

  17. Guidelines for Estimating Unmetered Industrial Water Use

    SciTech Connect

    Boyd, Brian K.

    2010-08-01

    The document provides a methodology to estimate unmetered industrial water use for evaporative cooling systems, steam generating boiler systems, batch process applications, and wash systems. For each category standard mathematical relationships are summarized and provided in a single resource to assist Federal agencies in developing an initial estimate of their industrial water use. The approach incorporates industry norms, general rules of thumb, and industry survey information to provide methodologies for each section.

  18. Chemical Industry: A New Interdisciplinary Course for Secondary Schools.

    ERIC Educational Resources Information Center

    Nae, Nehemia; And Others

    1980-01-01

    Describes an advanced high school course which incorporates an industrial approach into the chemistry curriculum. Presents three case studies as examples taken from the local chemistry industry--the production of copper, bromine, and plastics. (CS)

  19. Chemical Industry: A New Interdisciplinary Course for Secondary Schools.

    ERIC Educational Resources Information Center

    Nae, Nehemia; And Others

    1980-01-01

    Describes an advanced high school course which incorporates an industrial approach into the chemistry curriculum. Presents three case studies as examples taken from the local chemistry industry--the production of copper, bromine, and plastics. (CS)

  20. 10 CFR 431.75 - Materials incorporated by reference.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... INDUSTRIAL EQUIPMENT Commercial Warm Air Furnaces Test Procedures § 431.75 Materials incorporated by..., “Gas-Fired Central Furnaces,” IBR approved for § 431.76. (2) Underwriters Laboratories (UL) Standard 727-1994, “Standard for Safety Oil-Fired Central Furnaces,” IBR approved for § 431.76. (3) Sections...

  1. 10 CFR 431.75 - Materials incorporated by reference.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... INDUSTRIAL EQUIPMENT Commercial Warm Air Furnaces Test Procedures § 431.75 Materials incorporated by..., “Gas-Fired Central Furnaces,” IBR approved for § 431.76. (2) Underwriters Laboratories (UL) Standard 727-1994, “Standard for Safety Oil-Fired Central Furnaces,” IBR approved for § 431.76. (3) Sections...

  2. 10 CFR 431.75 - Materials incorporated by reference.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... INDUSTRIAL EQUIPMENT Commercial Warm Air Furnaces Test Procedures § 431.75 Materials incorporated by..., “Gas-Fired Central Furnaces,” IBR approved for § 431.76. (2) Underwriters Laboratories (UL) Standard 727-1994, “Standard for Safety Oil-Fired Central Furnaces,” IBR approved for § 431.76. (3) Sections...

  3. 30 CFR 250.198 - Documents incorporated by reference.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... INTERIOR OFFSHORE OIL AND GAS AND SULPHUR OPERATIONS IN THE OUTER CONTINENTAL SHELF General References... improvements or represent new industry standard technology and do not impose undue costs on the affected... in Offshore Oil and Gas Operations, incorporated by reference at § 250.806; (7) ANSI/ASME SPPE-1d...

  4. 30 CFR 250.198 - Documents incorporated by reference.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... INTERIOR OFFSHORE OIL AND GAS AND SULPHUR OPERATIONS IN THE OUTER CONTINENTAL SHELF General References... improvements or represent new industry standard technology and do not impose undue costs on the affected... in Offshore Oil and Gas Operations, incorporated by reference at § 250.806; (7) ANSI/ASME SPPE-1d...

  5. 10 CFR 431.15 - Materials incorporated by reference.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... INDUSTRIAL EQUIPMENT Electric Motors Test Procedures, Materials Incorporated and Methods of Determining... provisions of National Electrical Manufacturers Association Standards Publication MG1-1993, Motors and... and Dockets, “Test Procedures, Labeling, and Certification Requirements for Electric Motors,”...

  6. 10 CFR 431.15 - Materials incorporated by reference.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... INDUSTRIAL EQUIPMENT Electric Motors Test Procedures, Materials Incorporated and Methods of Determining... provisions of National Electrical Manufacturers Association Standards Publication MG1-1993, Motors and... and Dockets, “Test Procedures, Labeling, and Certification Requirements for Electric Motors,”...

  7. 10 CFR 431.443 - Materials incorporated by reference.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... AND INDUSTRIAL EQUIPMENT Small Electric Motors Test Procedures § 431.443 Materials incorporated by... motors, October 2009, IBR approved for §§ 431.444; 431.447. (2) CSA C390-10, Test methods, marking requirements, and energy efficiency levels for three-phase induction motors, March 2010, IBR approved...

  8. 10 CFR 431.443 - Materials incorporated by reference.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... AND INDUSTRIAL EQUIPMENT Small Electric Motors Test Procedures § 431.443 Materials incorporated by... Test Methods for Single- and Three-Phase Small Motors, IBR approved for § 431.444. (2) (c) IEEE. Institute of Electrical and Electronics Engineers, Inc., 445 Hoes Lane, P.O. Box 1331, Piscataway, NJ...

  9. 46 CFR 28.40 - Incorporation by reference.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... INDUSTRY VESSELS General Provisions § 28.40 Incorporation by reference. (a) Certain material is... section, the Coast Guard must publish notice of change in the Federal Register and make the material available to the public. All approved material is on file at the Coast Guard Headquarters. Contact...

  10. Alternative Control Techniques Document - Industrial Cleaning Solvents

    EPA Pesticide Factsheets

    This report provides alternative control techniques (ACT) for state and local agencies to consider incorporating in rules to limit emission of volatile organic compounds (VOCs) that otherwise result from industrial cleaning with organic solvents.

  11. Bismuth incorporation into gallium phosphide

    SciTech Connect

    Jena, Puru; Kandalam, Anil K.; Christian, Theresa M.; Beaton, Daniel A.; Mascarenhas, Angelo; Alberi, Kirstin

    2016-12-21

    Gallium phosphide bismide (GaP1-xBix) epilayers with bismuth fractions from 0.9% to 3.2%, as calculated from lattice parameter measurements, were studied with Rutherford backscattering spectrometry (RBS) to directly measure bismuth incorporation. The total bismuth fractions found by RBS were higher than expected from the lattice parameter calculations. Furthermore, in one analyzed sample grown by molecular beam epitaxy at 300 degrees C, 55% of incorporated bismuth was found to occupy interstitial sites. We discuss implications of this high interstitial incorporation fraction and its possible relationship to x-ray diffraction and photoluminescence measurements of GaP0.99Bi0.01.

  12. Bismuth incorporation into gallium phosphide

    NASA Astrophysics Data System (ADS)

    Christian, Theresa M.; Beaton, Daniel A.; Mascarenhas, Angelo; Alberi, Kirstin

    2016-12-01

    Gallium phosphide bismide (GaP1-xBix) epilayers with bismuth fractions from 0.9% to 3.2%, as calculated from lattice parameter measurements, were studied with Rutherford backscattering spectrometry (RBS) to directly measure bismuth incorporation. The total bismuth fractions found by RBS were higher than expected from the lattice parameter calculations. Furthermore, in one analyzed sample grown by molecular beam epitaxy at 300 °C, 55% of incorporated bismuth was found to occupy interstitial sites. We discuss implications of this high interstitial incorporation fraction and its possible relationship to x-ray diffraction and photoluminescence measurements of GaP0.99Bi0.01.

  13. 75 FR 40000 - Self-Regulatory Organizations; Financial Industry Regulatory Authority, Inc.; Order Approving...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-07-13

    ... COMMISSION Self-Regulatory Organizations; Financial Industry Regulatory Authority, Inc.; Order Approving Proposed Rule Change Relating to the Restated Certificate of Incorporation of Financial Industry Regulatory Authority, Inc. July 2, 2010. On May 21, 2010, Financial Industry Regulatory Authority, Inc....

  14. Industrial Robots.

    ERIC Educational Resources Information Center

    Reed, Dean; Harden, Thomas K.

    Robots are mechanical devices that can be programmed to perform some task of manipulation or locomotion under automatic control. This paper discusses: (1) early developments of the robotics industry in the United States; (2) the present structure of the industry; (3) noneconomic factors related to the use of robots; (4) labor considerations…

  15. Industrial Communications.

    ERIC Educational Resources Information Center

    Lindsay, Dan

    Intended for seniors planning a career in industry as skilled laborers, this specialized course in Industrial Communications offers the student basic communications skills which he will need in his work and in his daily life. Since class activities center around short, factual oral reports, class size will be limited to 20, providing a maximum of…

  16. INDUSTRIAL SKILLS.

    ERIC Educational Resources Information Center

    SEYMOUR, W. DOUGLAS

    THIS BOOK, A SEQUEL TO THE AUTHOR'S "INDUSTRIAL TRAINING FOR MANUAL OPERATIONS," COMPRISES THREE PARTS. IN PART ONE, THE NATURE OF SKILLS IN INDUSTRY IS DESCRIBED, AND THEIR RELATION TO HUMAN PERFORMANCE AND PRODUCTIVITY. IN PART TWO, AN OUTLINE OF RECENT RESEARCH AND A RESUME OF THE STATE OF KNOWLEDGE OF THE ACQUISITION OF SKILLS IS GIVEN. IN…

  17. Industrial Minerals.

    ERIC Educational Resources Information Center

    Brady, Lawrence L.

    1983-01-01

    Discusses trends in and factors related to the production of industrial minerals during 1982, indicating that, as 1981 marked a downturn in production of industrial minerals, 1982 continued the trend with temporary and permanent cutbacks in mine and plant production. Includes highlights of several conferences/conference papers in this field.…

  18. Industrial Robots.

    ERIC Educational Resources Information Center

    Reed, Dean; Harden, Thomas K.

    Robots are mechanical devices that can be programmed to perform some task of manipulation or locomotion under automatic control. This paper discusses: (1) early developments of the robotics industry in the United States; (2) the present structure of the industry; (3) noneconomic factors related to the use of robots; (4) labor considerations…

  19. Using Metrics in Industrial Arts.

    ERIC Educational Resources Information Center

    Bame, E. Allen

    This metric supplement is intended as a guide to aid the industrial arts teacher in incorporating metrics in the classroom. A list of student objectives for measurement skills is followed by an overview of the history of measurement, an argument for change to the metric system in the United States, and a discussion of metric basics (common terms).…

  20. Overview of Plant Incorporated Protectants

    EPA Pesticide Factsheets

    When assessing the potential risks of genetically engineered plant-incorporated protectants, EPA requires extensive studies examining numerous factors. Learn more about the history and process for regulating PIPs.

  1. Industrial garnet

    USGS Publications Warehouse

    Olson, D.W.

    2000-01-01

    The state of the global industrial garnet industry in 1999 is discussed. Industrial garnet mined in the U.S., which accounts for approximately one-third of the world's total, is usually a solid-solution of almandine and pyrope. The U.S. is the largest consumer of industrial garnet, using an estimated 47,800 st in 1999 as an abrasive and as a filtration medium in the petroleum industry, filtration plants, aircraft and motor vehicle manufacture, shipbuilding, wood furniture finishing operations, electronic component manufacture, ceramics manufacture, and glass production. Prices for crude concentrates ranged from approximately $50 to $110/st and refined garnet from $50 to $215/st in 1999, depending on type, source, quantity purchased, quality, and application.

  2. Soda Incorporation During Hydrate Precipitation

    NASA Astrophysics Data System (ADS)

    Vernon, Chris; Loh, Joanne; Lau, Daniel; Stanley, Andrew

    The economic necessity to achieve high precipitation yields and tough alumina must be balanced against another important quality consideration — occluded soda. Although there are a number of publications that develop hypotheses for the mechanism of soda incorporation, and some that give mathematical relationships to describe the rate of soda incorporation, none attempt to do this with any reference to known physical and chemical phenomena associated with the hydrate (gibbsite) growth mechanism.

  3. Industrial Chemistry.

    ERIC Educational Resources Information Center

    Gumprecht, Donald L.; Thrasher, Joseph S.

    1990-01-01

    Described is a course designed to better prepare students for employment in chemical industries. A course schedule for this interim course and a list of sources of speakers and speaker credentials is provided. (CW)

  4. 75 FR 52558 - Self-Regulatory Organizations; BATS Exchange, Inc.; Chicago Board Options Exchange, Incorporated...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-08-26

    ... From the Federal Register Online via the Government Publishing Office ] SECURITIES AND EXCHANGE...; BATS Exchange, Inc.; Chicago Board Options Exchange, Incorporated; Chicago Stock Exchange, Inc.; EDGA Exchange, Inc.; EDGX Exchange, Inc.; Financial Industry Regulatory Authority, Inc.; International...

  5. Electronics Industry

    DTIC Science & Technology

    2006-01-01

    companies to begin listing stock options as expenses on financial reports (Chappell, 2005). The industry had used stock options extensively to help... stock options (Chappell, 2005). Industry representatives interviewed by the group argued against the requirement since they predict U.S. companies...may be less inclined now to offer stock options , and subsequently talent may be lost to aggressive foreign competition (Anonymous interviews, 2006

  6. Host thin films incorporating nanoparticles

    NASA Astrophysics Data System (ADS)

    Qureshi, Uzma

    The focus of this research project was the investigation of the functional properties of thin films that incorporate a secondary nanoparticulate phase. In particular to assess if the secondary nanoparticulate material enhanced a functional property of the coating on glass. In order to achieve this, new thin film deposition methods were developed, namely use of nanopowder precursors, an aerosol assisted transport technique and an aerosol into atmospheric pressure chemical vapour deposition system. Aerosol assisted chemical vapour deposition (AACVD) was used to deposit 8 series of thin films on glass. Five different nanoparticles silver, gold, ceria, tungsten oxide and zinc oxide were tested and shown to successfully deposit thin films incorporating nanoparticles within a host matrix. Silver nanoparticles were synthesised and doped within a titania film by AACVD. This improved solar control properties. A unique aerosol assisted chemical vapour deposition (AACVD) into atmospheric pressure chemical vapour deposition (APCVD) system was used to deposit films of Au nanoparticles and thin films of gold nanoparticles incorporated within a host titania matrix. Incorporation of high refractive index contrast metal oxide particles within a host film altered the film colour. The key goal was to test the potential of nanopowder forms and transfer the suspended nanopowder via an aerosol to a substrate in order to deposit a thin film. Discrete tungsten oxide nanoparticles or ceria nanoparticles within a titanium dioxide thin film enhanced the self-cleaning and photo-induced super-hydrophilicity. The nanopowder precursor study was extended by deposition of zinc oxide thin films incorporating Au nanoparticles and also ZnO films deposited from a ZnO nanopowder precursor. Incorporation of Au nanoparticles within a VO: host matrix improved the thermochromic response, optical and colour properties. Composite VC/TiC and Au nanoparticle/V02/Ti02 thin films displayed three useful

  7. Selenium incorporation using recombinant techniques

    SciTech Connect

    Walden, Helen

    2010-04-01

    An overview of techniques for recombinant incorporation of selenium and subsequent purification and crystallization of the resulting labelled protein. Using selenomethionine to phase macromolecular structures is common practice in structure determination, along with the use of selenocysteine. Selenium is consequently the most commonly used heavy atom for MAD. In addition to the well established recombinant techniques for the incorporation of selenium in prokaryal expression systems, there have been recent advances in selenium labelling in eukaryal expression, which will be discussed. Tips and things to consider for the purification and crystallization of seleno-labelled proteins are also included.

  8. Kennedy Space Center's Partnership with Graftel Incorporated

    NASA Technical Reports Server (NTRS)

    Dunn, Carol Anne

    2010-01-01

    NASA Kennedy Space Center (KSC) has recently partnered with Graftel Incorporated under an exclusive license agreement for the manufacture and sale of the Smart Current Signature Sensor. The Smart Current Signature Sensor and software were designed and developed to be utilized on any application using solenoid valves. The system monitors the electrical and mechanical health of solenoids by comparing the electrical current profile of each solenoid actuation to a typical current profile and reporting deviation from its learned behavior. The objective of this partnership with Graftel is for them to develop the technology into a hand-held testing device for their customer base in the Nuclear Power Industry. The device will be used to perform diagnostic testing on electromechanical valves used in Nuclear Power plants. Initially, Graftel plans to have working units within the first year of license in order to show customers and allow them to put purchase requests into their next year's budget. The subject technology under discussion was commercialized by the Kennedy Space Center Technology Programs and Partnerships Office, which patented the technology and licensed it to Graftel, Inc., a company providing support, instrumentation, and calibration services to the nuclear community and private sector for over 10 years. For the nuclear power industry, Graftel designs, manufacturers, and calibrates a full line of testing instrumentation. Grafters smart sensors have been in use in the United States since 1993 and have proved to decrease set-up time and test durations. The project was funded by Non-Destructive Engineering, and it is felt that this technology will have more emphasis on future vehicles. Graftel plans to market the Current Signature Sensor to the Electric Utility industry. Graftel currently supplies product and services to the Nuclear Power Industry in the United States as well as internationally. Product and services sold are used in non-destructive testing for

  9. Incorporating Argumentation through Forensic Science

    ERIC Educational Resources Information Center

    Wheeler, Lindsay B.; Maeng, Jennifer L.; Smetana, Lara K.

    2014-01-01

    This article outlines how to incorporate argumentation into a forensic science unit using a mock trial. Practical details of the mock trial include: (1) a method of scaffolding students' development of their argument for the trial, (2) a clearly outlined set of expectations for students during the planning and implementation of the mock…

  10. Incorporating Argumentation through Forensic Science

    ERIC Educational Resources Information Center

    Wheeler, Lindsay B.; Maeng, Jennifer L.; Smetana, Lara K.

    2014-01-01

    This article outlines how to incorporate argumentation into a forensic science unit using a mock trial. Practical details of the mock trial include: (1) a method of scaffolding students' development of their argument for the trial, (2) a clearly outlined set of expectations for students during the planning and implementation of the mock…

  11. Industrial diamond

    USGS Publications Warehouse

    Olson, D.W.

    2013-01-01

    Estimated 2012 world production of natural and synthetic industrial diamond was about 4.45 billion carats. During 2012, natural industrial diamonds were produced in at least 20 countries, and synthetic industrial diamond was produced in at least 12 countries. About 99 percent of the combined natural and synthetic global output was produced in Belarus, China, Ireland, Japan, Russia, South Africa and the United States. During 2012, China was the world’s leading producer of synthetic industrial diamond followed by the United States and Russia. In 2012, the two U.S. synthetic producers, one in Pennsylvania and the other in Ohio, had an estimated output of 103 million carats, valued at about $70.6 million. This was an estimated 43.7 million carats of synthetic diamond bort, grit, and dust and powder with a value of $14.5 million combined with an estimated 59.7 million carats of synthetic diamond stone with a value of $56.1 million. Also in 2012, nine U.S. firms manufactured polycrystalline diamond (PCD) from synthetic diamond grit and powder. The United States government does not collect or maintain data for either domestic PCD producers or domestic chemical vapor deposition (CVD) diamond producers for quantity or value of annual production. Current trade and consumption quantity data are not available for PCD or for CVD diamond. For these reasons, PCD and CVD diamond are not included in the industrial diamond quantitative data reported here.

  12. Industrial diamond

    USGS Publications Warehouse

    Olson, D.W.

    2007-01-01

    World production of natural and synthetic industrial diamond was about 648 million carats in 2006, with 79 percent of the production coming from Ireland, Japan, Russia, South Africa, and the U.S. U.S. consumption was was an estimated 602 million carats, imports were over 391 million carats, and exports were about 83 million carats. About 87 percent of the industrial diamonds market uses synthetic diamonds, which are expected to become less expensive as technology improves and competition from low-cost producers increases.

  13. Industrial garnet

    USGS Publications Warehouse

    Olson, D.W.

    2006-01-01

    In 2005, US production of crude garnet concentrate for industrial use was 28.4 kt valued at $3.05 million. Refined garnet material sold or used was 30.4 kt valued at $10 million. For the year, the US was one of the world's leading consumers of industrial garnet. Domestic values for crude concentrates for different applications ranged from about $53 to $120/t. In the short term, excess production capacity, combined with suppliers that vary in quality, grain size and mineral type, will keep prices down.

  14. 10 CFR 431.75 - Materials incorporated by reference.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... INDUSTRIAL EQUIPMENT Commercial Warm Air Furnaces Test Procedures § 431.75 Materials incorporated by... Z21.47-1998”), “Gas-Fired Central Furnaces,” approved by ANSI on June 9, 1998, IBR approved for § 431.76. (2) ANSI Z21.47-2006, (“ANSI Z21.47-2006”), “Gas-Fired Central Furnaces,” approved on July...

  15. Industrial Orientation.

    ERIC Educational Resources Information Center

    Rasor, Leslie; Brooks, Valerie

    These eight modules for an industrial orientation class were developed by a project to design an interdisciplinary program of basic skills training for disadvantaged students in a Construction Technology Program (see Note). The Drafting module overviews drafting career opportunities, job markets, salaries, educational requirements, and basic…

  16. Industrial Microorganisms.

    ERIC Educational Resources Information Center

    Phaff, Herman J.

    1981-01-01

    Describes industrially important yeasts, molds, bacteria, and actinomycetes. Discussed in detail are microbial products, such as primary metabolites, secondary metabolites, enzymes, and capsular polysaccharides. Traces the historical background of human cell culture, mentioning recombinant DNA research and hybridization of normal mammalian cells…

  17. Fermentation Industry.

    ERIC Educational Resources Information Center

    Grady, C. P. L., Jr.; Grady, J. K.

    1978-01-01

    Presents a literature review of wastes from the fermentation industry, covering publications of 1976-77. This review focuses on: (1) alcoholic beverage production; (2) pharmaceuticals and biochemicals production; and (3) biomass production. A list of 62 references is also presented. (HM)

  18. Industrial garnet

    USGS Publications Warehouse

    Olson, D.W.

    2012-01-01

    Garnet has been used as a gemstone since the Bronze Age. However, garnet's angular fractures, relatively high hardness and specific gravity, chemical inertness, and nontoxicity make it ideal for many industrial applications. It is also free of crystalline silica and can be recycled.

  19. Industrial garnet

    USGS Publications Warehouse

    Olson, D.W.

    2013-01-01

    Garnet has been used as a gemstone since the Bronze Age. However, garnet’s angular fractures, relatively high hardness and specific gravity, chemical inertness and nontoxicity make it ideal for many industrial applications. It is also free of crystalline silica and can be recycled.

  20. Industrial garnet

    USGS Publications Warehouse

    Olson, D.W.

    2011-01-01

    Garnet has been used as a gemstone since the Bronze Age. However, garnet's angular fractures, relatively high hardness and specific gravity, chemical inertness and nontoxicity make it ideal for many industrial applications. It is also free of crystalline silica and can be recycled.

  1. Fermentation Industry.

    ERIC Educational Resources Information Center

    Grady, C. P. L., Jr.; Grady, J. K.

    1978-01-01

    Presents a literature review of wastes from the fermentation industry, covering publications of 1976-77. This review focuses on: (1) alcoholic beverage production; (2) pharmaceuticals and biochemicals production; and (3) biomass production. A list of 62 references is also presented. (HM)

  2. Fermentation industry

    SciTech Connect

    Chiesa, S.C.; Manning, J.F. Jr.

    1983-06-01

    A literature review of the fermenation industry's wastes is presented. In addition to studies on the characterization, treatment, and disposal of wastes in alcohol fuel production, studies concerning wastes from breweries, wineries, yeast manufacture, pharmaceutical production, and distilleries are reviewed. (JMT)

  3. Industrial Microorganisms.

    ERIC Educational Resources Information Center

    Phaff, Herman J.

    1981-01-01

    Describes industrially important yeasts, molds, bacteria, and actinomycetes. Discussed in detail are microbial products, such as primary metabolites, secondary metabolites, enzymes, and capsular polysaccharides. Traces the historical background of human cell culture, mentioning recombinant DNA research and hybridization of normal mammalian cells…

  4. Industrial garnet

    USGS Publications Warehouse

    Olson, D.W.

    2010-01-01

    In 2009, U.S. production of crude garnet concentrate for industrial use was estimated to be 56.5 kt (62,300 st), valued at about $8.85 million. This was a 10-percent decrease in quantity compared with 2008 production. Refined garnet material sold or used was 28 kt (31,000 st) valued at $7.96 million.

  5. Selenium incorporation using recombinant techniques.

    PubMed

    Walden, Helen

    2010-04-01

    Using selenomethionine to phase macromolecular structures is common practice in structure determination, along with the use of selenocysteine. Selenium is consequently the most commonly used heavy atom for MAD. In addition to the well established recombinant techniques for the incorporation of selenium in prokaryal expression systems, there have been recent advances in selenium labelling in eukaryal expression, which will be discussed. Tips and things to consider for the purification and crystallization of seleno-labelled proteins are also included.

  6. Industrial alliances

    SciTech Connect

    Adams, K.V.

    1993-09-13

    The United States is emerging from the Cold War era into an exciting, but challenging future. Improving the economic competitiveness of our Nation is essential both for improving the quality of life in the United States and maintaining a strong national security. The research and technical skills used to maintain a leading edge in defense and energy now should be used to help meet the challenge of maintaining, regaining, and establishing US leadership in industrial technologies. Companies recognize that success in the world marketplace depends on products that are at the leading edge of technology, with competitive cost, quality, and performance. Los Alamos National Laboratory and its Industrial Partnership Center (IPC) has the strategic goal to make a strong contribution to the nation`s economic competitiveness by leveraging the government`s investment at the Laboratory: personnel, infrastructure, and technological expertise.

  7. Shipbuilding Industry

    DTIC Science & Technology

    2006-01-01

    vessels, the industry cannot compete internationally due to higher costs and prices . On the commercial side, based on information provided during...challenges. The defense sector, though producing the most advanced ships in the world, does so at exorbitant prices , limiting the number that the U.S...Navy can afford. Based on visits to twenty-four U.S. and Australian shipyards, the U.S. government should provide targeted support to the commercial

  8. Industrial garnet

    USGS Publications Warehouse

    Olson, D.W.

    2007-01-01

    World production of industrial garnet was about 326 kt in 2006, with the U.S. producing about 11 percent of this total. U.S. consumption, imports, and exports were estimated at 74.3 kt, 52.3 kt, and 13.2 kt, respectively. The most important exporters are Australia, China, and India. Although demand is expected to rise over the next 5 years, prices are expected to remain low in the short term.

  9. Industrial radiointroscopy

    NASA Astrophysics Data System (ADS)

    Kliuev, V. V.; Leonov, B. I.; Gusev, E. A.

    The operating principles and design of various types of radiointroscopes used in industry for fault inspection are described, together with the sources of penetrating radiation, radiooptic image converters, and image amplifiers. The theory of image formation by a radiointroscope and mathematical models of the image formation are discussed. Consideration is given to the design of radioscope television systems, and their optical characteristics, resolving power, signal/noise characteristics, contrast sensitivity, and the transmission band of the communication channel.

  10. Incorporation of additives into polymers

    DOEpatents

    McCleskey, T. Mark; Yates, Matthew Z.

    2003-07-29

    There has been invented a method for incorporating additives into polymers comprising: (a) forming an aqueous or alcohol-based colloidal system of the polymer; (b) emulsifying the colloidal system with a compressed fluid; and (c) contacting the colloidal polymer with the additive in the presence of the compressed fluid. The colloidal polymer can be contacted with the additive by having the additive in the compressed fluid used for emulsification or by adding the additive to the colloidal system before or after emulsification with the compressed fluid. The invention process can be carried out either as a batch process or as a continuous on-line process.

  11. Incorporating Spirituality in Primary Care.

    PubMed

    Isaac, Kathleen S; Hay, Jennifer L; Lubetkin, Erica I

    2016-06-01

    Addressing cultural competency in health care involves recognizing the diverse characteristics of the patient population and understanding how they impact patient care. Spirituality is an aspect of cultural identity that has become increasingly recognized for its potential to impact health behaviors and healthcare decision-making. We consider the complex relationship between spirituality and health, exploring the role of spirituality in primary care, and consider the inclusion of spirituality in existing models of health promotion. We discuss the feasibility of incorporating spirituality into clinical practice, offering suggestions for physicians.

  12. Selenium incorporation using recombinant techniques

    PubMed Central

    Walden, Helen

    2010-01-01

    Using selenomethionine to phase macromolecular structures is common practice in structure determination, along with the use of selenocysteine. Selenium is consequently the most commonly used heavy atom for MAD. In addition to the well established recombinant techniques for the incorporation of selenium in pro­karyal expression systems, there have been recent advances in selenium labelling in eukaryal expression, which will be discussed. Tips and things to consider for the purification and crystallization of seleno-labelled proteins are also included. PMID:20382987

  13. Ba incorporation in benthic foraminifera

    NASA Astrophysics Data System (ADS)

    de Nooijer, Lennart J.; Brombacher, Anieke; Mewes, Antje; Langer, Gerald; Nehrke, Gernot; Bijma, Jelle; Reichart, Gert-Jan

    2017-07-01

    Barium (Ba) incorporated in the calcite of many foraminiferal species is proportional to the concentration of Ba in seawater. Since the open ocean concentration of Ba closely follows seawater alkalinity, foraminiferal Ba / Ca can be used to reconstruct the latter. Alternatively, Ba / Ca from foraminiferal shells can also be used to reconstruct salinity in coastal settings in which seawater Ba concentration corresponds to salinity as rivers contain much more Ba than seawater. Incorporation of a number of minor and trace elements is known to vary (greatly) between foraminiferal species, and application of element / Ca ratios thus requires the use of species-specific calibrations. Here we show that calcite Ba / Ca correlates positively and linearly with seawater Ba / Ca in cultured specimens of two species of benthic foraminifera: Heterostegina depressa and Amphistegina lessonii. The slopes of the regression, however, vary two- to threefold between these two species (0.33 and 0.78, respectively). This difference in Ba partitioning resembles the difference in partitioning of other elements (Mg, Sr, B, Li and Na) in these foraminiferal taxa. A general trend across element partitioning for different species is described, which may help develop new applications of trace elements in foraminiferal calcite in reconstructing past seawater chemistry.

  14. Manufacturing Industry, Industry Study, Spring 2009

    DTIC Science & Technology

    2009-01-01

    Spring 2009 Industry Study Final Report Manufacturing Industry ...The Industrial College of the Armed Forces National Defense University Fort McNair, Washington, D.C. 20319-5062 Report Documentation Page Form...COVERED 00-00-2009 to 00-00-2009 4. TITLE AND SUBTITLE Spring 2009. Industry Study. Manufacturing Industry 5a. CONTRACT NUMBER 5b. GRANT NUMBER 5c

  15. Incorporation of salinity in Water Availability Modeling

    NASA Astrophysics Data System (ADS)

    Wurbs, Ralph A.; Lee, Chihun

    2011-10-01

    SummaryNatural salt pollution from geologic formations in the upper watersheds of several large river basins in the Southwestern United States severely constrains the use of otherwise available major water supply sources. The Water Rights Analysis Package modeling system has been routinely applied in Texas since the late 1990s in regional and statewide planning studies and administration of the state's water rights permit system, but without consideration of water quality. The modeling system was recently expanded to incorporate salinity considerations in assessments of river/reservoir system capabilities for supplying water for environmental, municipal, agricultural, and industrial needs. Salinity loads and concentrations are tracked through systems of river reaches and reservoirs to develop concentration frequency statistics that augment flow frequency and water supply reliability metrics at pertinent locations for alternative water management strategies. Flexible generalized capabilities are developed for using limited observed salinity data to model highly variable concentrations imposed upon complex river regulation infrastructure and institutional water allocation/management practices.

  16. Industrial concerns

    NASA Astrophysics Data System (ADS)

    2008-04-01

    Physics in industry is worth reporting, but deciding what counts can be a challenge "If a man can make a better mousetrap than his neighbour...the world will make a beaten path to his door." That quotation, which was apparently inspired by a comment that the American essayist Ralph Waldo Emerson made during a lecture in 1871, has long been used to illustrate the power of invention and innovation. While the lowly mousetrap may hardly seem the pinnacle of technology in today's world of iPhones and Blu-ray DVDs, an effective tool to kill mice was certainly a desirable object in Emerson's day (p52).

  17. 17 CFR 260.7a-30 - Identification of material incorporated; form of incorporation.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... Incorporation by Reference § 260.7a-30 Identification of material incorporated; form of incorporation. In each case of incorporation by reference, the matter incorporated shall be clearly identified in the... 17 Commodity and Securities Exchanges 3 2010-04-01 2010-04-01 false Identification of material...

  18. Incorporation of heparin into biomaterials.

    PubMed

    Sakiyama-Elbert, Shelly E

    2014-04-01

    This review provides an overview of the incorporation of heparin into biomaterials with a focus on drug delivery and the use of heparin-based biomaterials for self-assembly of polymer networks. Heparin conjugation to biomaterials was originally explored to reduce the thrombogenicity of materials in contact with blood. Many of the conjugation strategies that were developed for these applications are still popular today for other applications. More recently heparin has been conjugated to biomaterials for drug delivery applications. Many of the delivery approaches have taken advantage of the ability of heparin to bind to a wide variety of growth factors, protecting them from degradation and potentiating interactions with cell surface receptors. More recently, the use of heparin as a base polymer for scaffold fabrication has also been explored, often utilizing non-covalent binding of heparin with peptides or proteins to promote self-assembly of hydrogel networks. This review will highlight recent advances in each of these areas.

  19. Information for Industrial Development,

    DTIC Science & Technology

    Information processing, *Technology transfer, * Industries , Information transfer, Industrial engineering , Planning, Research management, Investments...Operation, Industrial production, Data bases, Information systems, User needs, Symposia

  20. Industrial furnace

    SciTech Connect

    Shostak, V.M.; Tolochko, A.I.; Volkov, V.P.; Maradudin, G.I.; Schekin, N.G.; Popov, M.I.; Shepelev, D.N.; Matveev, A.I.; Butnyakov, A.I.; Rzhavichev, A.P.

    1986-09-02

    An industrial furnace is described which consists of: a bath made of a refractory material for filling with a melt; a direct current source; main current-carrying elements having free ends extending to an operating area of the refractory material of the bath below and above the melt, and the main current-carrying elements extending to the operating area below the melt being connected with opposite terminals of the current source from the main current-carrying elements extending to the operating area above the melt; and additional current-carrying elements having free ends sunk in the refractory material of the bath below and above the melt and the additional current-carrying elements being connected with the terminals of the power source of opposite polarity with respect to the connection of the main current-carrying elements of a corresponding part of the operating area.

  1. Industry Support

    NASA Technical Reports Server (NTRS)

    2003-01-01

    NASA Glenn Research Center (GRC) is responsible for the Advanced Communications for Air Traffic Management (AC/ATM) Project, a sub-element task of the Advanced Air Transportation Technologies (AATT) Project of the NASA Aviation System Capacity Program (ASC). The AC/ATM Project is developing new communications technologies and tools that will improve throughput in the U.S. Air Traffic Control System. The goal of the AC/ATM Project is to enable a communications infrastructure providing the capacity, efficiency, and flexibility necessary to realize benefits of the future mature Free-Flight environment. The capabilities and scope of communications technologies needed to accomplish this goal depend on characteristics of the future Free-Flight environment. There are many operational concepts being proposed for a future ATM system to enable user flexibility and efficiency. GRC s focus is on developing new technologies and techniques to support the digital communication of information involving airborne and ground-based users. However, the technologies and techniques must be integrated with the systems and services that industry and the Federal Aviation Administration (FAA) are developing. Thus, GRC needs to monitor and provide input to the various industry and FAA organizations and committees that are specifying new systems and services. Adoption of technologies by the FAA is partially dependent on acceptance of the technology by the aviation community. The commercial aviation community in particular would like to adopt technologies that can be used throughout the world. As a result, the adoption of common or at least compatible technologies by European countries is a key factor in getting commitments to those technologies by the US aviation community. GRC desires to keep informed of European activities that relate to aviation communication technologies, particularly those that are being supported by Eurocontrol.

  2. 49 CFR 572.180 - Incorporated materials.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... 49 Transportation 7 2014-10-01 2014-10-01 false Incorporated materials. 572.180 Section 572.180... Test Dummy, 50th Percentile Adult Male § 572.180 Incorporated materials. (a) The following materials... approved the materials incorporated by reference in accordance with 5 U.S.C. 552(a) and 1 CFR part...

  3. 49 CFR 572.80 - Incorporated materials.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... 49 Transportation 7 2014-10-01 2014-10-01 false Incorporated materials. 572.80 Section 572.80... Incorporated materials. The drawings and specifications referred to in § 572.81(a) that are not set forth in full are hereby incorporated in this part by reference. These materials are thereby made part of...

  4. 49 CFR 572.30 - Incorporated materials.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 49 Transportation 7 2011-10-01 2011-10-01 false Incorporated materials. 572.30 Section 572.30....30 Incorporated materials. (a) The drawings and specifications referred to in this regulation that... Federal Register has approved the materials incorporated by reference. For materials subject to...

  5. 49 CFR 572.30 - Incorporated materials.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... 49 Transportation 7 2012-10-01 2012-10-01 false Incorporated materials. 572.30 Section 572.30....30 Incorporated materials. (a) The drawings and specifications referred to in this regulation that... Federal Register has approved the materials incorporated by reference. For materials subject to...

  6. 49 CFR 572.30 - Incorporated materials.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 49 Transportation 7 2010-10-01 2010-10-01 false Incorporated materials. 572.30 Section 572.30....30 Incorporated materials. (a) The drawings and specifications referred to in this regulation that... Federal Register has approved the materials incorporated by reference. For materials subject to...

  7. 49 CFR 572.30 - Incorporated materials.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... 49 Transportation 7 2013-10-01 2013-10-01 false Incorporated materials. 572.30 Section 572.30....30 Incorporated materials. (a) The drawings and specifications referred to in this regulation that... Federal Register has approved the materials incorporated by reference. For materials subject to...

  8. 49 CFR 572.190 - Incorporated materials.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... 49 Transportation 7 2013-10-01 2013-10-01 false Incorporated materials. 572.190 Section 572.190... Test Dummy, Small Adult Female § 572.190 Incorporated materials. (a) The following materials are hereby... Register approved the materials incorporated by reference in accordance with 5 U.S.C. 552(a) and 1 CFR...

  9. 49 CFR 572.80 - Incorporated materials.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 49 Transportation 7 2010-10-01 2010-10-01 false Incorporated materials. 572.80 Section 572.80... Incorporated materials. The drawings and specifications referred to in § 572.81(a) that are not set forth in full are hereby incorporated in this part by reference. These materials are thereby made part of...

  10. 49 CFR 587.5 - Incorporated materials.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 49 Transportation 7 2010-10-01 2010-10-01 false Incorporated materials. 587.5 Section 587.5... Barrier § 587.5 Incorporated materials. (a) The drawings and specifications referred to in this regulation that are not set forth in full are hereby incorporated in this part by reference. These materials...

  11. 49 CFR 572.80 - Incorporated materials.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 49 Transportation 7 2011-10-01 2011-10-01 false Incorporated materials. 572.80 Section 572.80... Incorporated materials. The drawings and specifications referred to in § 572.81(a) that are not set forth in full are hereby incorporated in this part by reference. These materials are thereby made part of...

  12. 49 CFR 572.80 - Incorporated materials.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... 49 Transportation 7 2013-10-01 2013-10-01 false Incorporated materials. 572.80 Section 572.80... Incorporated materials. The drawings and specifications referred to in § 572.81(a) that are not set forth in full are hereby incorporated in this part by reference. These materials are thereby made part of...

  13. 49 CFR 587.5 - Incorporated materials.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 49 Transportation 7 2011-10-01 2011-10-01 false Incorporated materials. 587.5 Section 587.5... Barrier § 587.5 Incorporated materials. (a) The drawings and specifications referred to in this regulation that are not set forth in full are hereby incorporated in this part by reference. These materials...

  14. 49 CFR 587.5 - Incorporated materials.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... 49 Transportation 7 2013-10-01 2013-10-01 false Incorporated materials. 587.5 Section 587.5... Barrier § 587.5 Incorporated materials. (a) The drawings and specifications referred to in this regulation that are not set forth in full are hereby incorporated in this part by reference. These materials...

  15. 49 CFR 572.180 - Incorporated materials.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... 49 Transportation 7 2013-10-01 2013-10-01 false Incorporated materials. 572.180 Section 572.180... Test Dummy, 50th Percentile Adult Male § 572.180 Incorporated materials. (a) The following materials... approved the materials incorporated by reference in accordance with 5 U.S.C. 552(a) and 1 CFR part...

  16. 49 CFR 572.80 - Incorporated materials.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... 49 Transportation 7 2012-10-01 2012-10-01 false Incorporated materials. 572.80 Section 572.80... Incorporated materials. The drawings and specifications referred to in § 572.81(a) that are not set forth in full are hereby incorporated in this part by reference. These materials are thereby made part of...

  17. Numeral Incorporation in Japanese Sign Language

    ERIC Educational Resources Information Center

    Ktejik, Mish

    2013-01-01

    This article explores the morphological process of numeral incorporation in Japanese Sign Language. Numeral incorporation is defined and the available research on numeral incorporation in signed language is discussed. The numeral signs in Japanese Sign Language are then introduced and followed by an explanation of the numeral morphemes which are…

  18. Numeral Incorporation in Japanese Sign Language

    ERIC Educational Resources Information Center

    Ktejik, Mish

    2013-01-01

    This article explores the morphological process of numeral incorporation in Japanese Sign Language. Numeral incorporation is defined and the available research on numeral incorporation in signed language is discussed. The numeral signs in Japanese Sign Language are then introduced and followed by an explanation of the numeral morphemes which are…

  19. Incorporating transgenerational testing and epigenetic ...

    EPA Pesticide Factsheets

    A number of environmental chemicals have been shown to alter markers of epigenetic change. Some published multi-generation rodent studies have identified effects on F2 and greater generations after chemical exposures solely to F0 dams, but were not focused on chemical safety. We were interested in how outcomes related to epigenetic changes could be identified and incorporated into chemical testing and risk assessment. To address this question, we conducted a systematic literature review to identify transgenerational (TG) epigenetic studies in rodents. These were analyzed to characterize the methods and observed outcomes, and to evaluate strengths, limitations, and biases. Our analysis found that test substances were administered to pregnant F0 dams; endpoints assessed in F1 to F4 generation offspring included growth, puberty timing, steroid hormone levels, abdominal adiposity, organ weights, histopathology, and epigenetic biomarkers. Biases were minimized through, e.g., randomization procedures, avoiding sibling or cousin matings, and independent multiple reviews of histopathology data. However, the numbers of litters assigned to control and test groups were not always transparently reported, nested statistical analyses of data was not always utilized to address litter effects, and “blind” testing was seldom performed. Many of these studies identified chemicals or combinations of chemicals that produced TG effects and/or adult-onset diseases, but there is a

  20. Incorporating transgenerational testing and epigenetic ...

    EPA Pesticide Factsheets

    A number of environmental chemicals have been shown to alter markers of epigenetic change. Some published multi-generation rodent studies have identified effects on F2 and greater generations after chemical exposures solely to F0 dams, but were not focused on chemical safety. We were interested in how outcomes related to epigenetic changes could be identified and incorporated into chemical testing and risk assessment. To address this question, we conducted a systematic literature review to identify transgenerational (TG) epigenetic studies in rodents. These were analyzed to characterize the methods and observed outcomes, and to evaluate strengths, limitations, and biases. Our analysis found that test substances were administered to pregnant F0 dams; endpoints assessed in F1 to F4 generation offspring included growth, puberty timing, steroid hormone levels, abdominal adiposity, organ weights, histopathology, and epigenetic biomarkers. Biases were minimized through, e.g., randomization procedures, avoiding sibling or cousin matings, and independent multiple reviews of histopathology data. However, the numbers of litters assigned to control and test groups were not always transparently reported, nested statistical analyses of data was not always utilized to address litter effects, and “blind” testing was seldom performed. Many of these studies identified chemicals or combinations of chemicals that produced TG effects and/or adult-onset diseases, but there is a

  1. Industrial ecology Prosperity Game{trademark}

    SciTech Connect

    Beck, D.; Boyack, K.; Berman, M.

    1998-03-01

    Industrial ecology (IE) is an emerging scientific field that views industrial activities and the environment as an interactive whole. The IE approach simultaneously optimizes activities with respect to cost, performance, and environmental impact. Industrial Ecology provides a dynamic systems-based framework that enables management of human activity on a sustainable basis by: minimizing energy and materials usage; insuring acceptable quality of life for people; minimizing the ecological impact of human activity to levels that natural systems can sustain; and maintaining the economic viability of systems for industry, trade and commerce. Industrial ecology applies systems science to industrial systems, defining the system boundary to incorporate the natural world. Its overall goal is to optimize industrial activities within the constraints imposed by ecological viability, globally and locally. In this context, Industrial systems applies not just to private sector manufacturing and services but also to government operations, including provision of infrastructure. Sandia conducted its seventeenth Prosperity Game{trademark} on May 23--25, 1997, at the Hyatt Dulles Hotel in Herndon, Virginia. The primary sponsors of the event were Sandia National Laboratories and Los Alamos National Laboratory, who were interested in using the format of a Prosperity Game to address some of the issues surrounding Industrial Ecology. Honorary game sponsors were: The National Science Foundation; the Committee on Environmental Improvement, American Chemical Society; the Industrial and Engineering Chemistry Division, American Chemical Society; the US EPA--The Smart Growth Network, Office of Policy Development; and the US DOE-Center of Excellence for Sustainable Development.

  2. What Teachers Can Learn from Industry Internships.

    ERIC Educational Resources Information Center

    Farrell, Ann M.

    1992-01-01

    Recently, the Dayton-Montgomery (Ohio) Public Education Fund Mathematics Collaborative sponsored 18 educators in a summer industry internship program. Many teachers gained invaluable insights on learning to work with people and applying knowledge to work situations. Participants learned the value of incorporating teamwork, technology, problem…

  3. Applied Art in Trade and Industrial Education.

    ERIC Educational Resources Information Center

    King, Annie; Zirkle, Chris

    Ohio Hi-Point Joint Vocational School (JVS) has developed a comprehensive art program within the vocational setting. Selected trade and industrial programs at the school, as well as programs in agriculture and home economics, incorporate art instruction. The goals of the applied art program are as follows: to give students the opportunity to…

  4. Science Lessons from Industrial Processes--Sunderland.

    ERIC Educational Resources Information Center

    Nellist, J.

    1980-01-01

    Presents aims of an inservice course designed to encourage science teachers to incorporate material of relevance to the local industrial scene into their existing curricula. Projects required by participants in the course are listed with their brief descriptions and possible applications in the classroom. (CS)

  5. Industrial Productivity

    NASA Technical Reports Server (NTRS)

    1977-01-01

    NASTRAN is an offshoot of the computer-design technique used in construction of airplanes and spacecraft. [n this technique engineers create a mathematical model of the aeronautical or space vehicle and "fly" it on the ground by means of computer simulation. The technique enables them to study performance and structural behavior of a number of different designs before settling on the final configuration and proceeding with construction. From this base of aerospace experience, NASA-Goddard developed the NASTRAN general purpose computer program, which offers an exceptionally wide range of analytic capability with regard to structures. NASTRAN has been applied to autos, trucks, railroad cars, ships, nuclear power reactors, steam turbines, bridges, and office buildings. NASA-Langley provides program maintenance services regarded as vital by many NASTRAN users. NASTRAN is essentially a predictive tool. It takes an electronic look at a computerire$.dedgn and reports how the structure will react under a great many different conditions. It can, for example, note areas where high stress levels will occur-potential failure points that need strengthening. Conversely, it can identify over-designed areas where weight and material might be saved safely. NASTRAN can tell how pipes stand up under strong fluid flow, how metals are affected by high temperatures, how a building will fare in an earthquake or how powerful winds will cause a bridge to oscillate. NASTRAN analysis is quick and inexpensive. It minimizes trial-and-error in the design process and makes possible better, safe, lighter structures affording large-scale savings in development time and materials. Some examples of the broad utility NASTRAN is finding among industrial firms are shown on these pages.

  6. Using IT Industry Practices to Modernize University Education

    ERIC Educational Resources Information Center

    Messing, John; Altas, Irfan

    2006-01-01

    Incorporating industry training into university courses is not in itself a radically new concept. Many examples in a variety of professions have demonstrated the value of industry input into university curricula. The information technology (IT) profession is different from many others in that it has high volatility and a short shelf-life of…

  7. The Importance of Industrial Ecology in Engineering Education for Sustainable Development

    ERIC Educational Resources Information Center

    Biswas, Wahidul K.

    2012-01-01

    Purpose: The purpose of this paper is to show how industrial ecology can facilitate the achievement of sustainable development through its incorporation into an engineering curriculum. Design/methodology/approach: A model has been developed for assessing sustainability learning outcomes due to the incorporation of the concept of industrial ecology…

  8. The Importance of Industrial Ecology in Engineering Education for Sustainable Development

    ERIC Educational Resources Information Center

    Biswas, Wahidul K.

    2012-01-01

    Purpose: The purpose of this paper is to show how industrial ecology can facilitate the achievement of sustainable development through its incorporation into an engineering curriculum. Design/methodology/approach: A model has been developed for assessing sustainability learning outcomes due to the incorporation of the concept of industrial ecology…

  9. Functional Competencies Needed by Industrial Arts Instructors to Adequately Perform in Contemporary Industrial Arts Laboratory/Classrooms.

    ERIC Educational Resources Information Center

    Miller, James Arthur

    To identify functional competencies needed by instructors who teach in contemporary industrial arts programs, 75 functional competencies were incorporated into a questionnaire sent to industrial arts educators and supervisors throughout the United States, Canada, and the District of Columbia. From the 438 responses, representing 78.2 percent of…

  10. Professors and Industry Meet

    ERIC Educational Resources Information Center

    Sheriff, Robert E.

    1974-01-01

    Describes backgrounds of geophysics graduates that are desired for employment by industry. Also listed are areas in which industry could help universities concerning the development of programs to meet the future manpower needs in industry. (BR)

  11. Chemicals Industry Vision

    SciTech Connect

    none,

    1996-12-01

    Chemical industry leaders articulated a long-term vision for the industry, its markets, and its technology in the groundbreaking 1996 document Technology Vision 2020 - The U.S. Chemical Industry. (PDF 310 KB).

  12. Professors and Industry Meet

    ERIC Educational Resources Information Center

    Sheriff, Robert E.

    1974-01-01

    Describes backgrounds of geophysics graduates that are desired for employment by industry. Also listed are areas in which industry could help universities concerning the development of programs to meet the future manpower needs in industry. (BR)

  13. 49 CFR 572.40 - Incorporated materials.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 49 Transportation 7 2010-10-01 2010-10-01 false Incorporated materials. 572.40 Section 572.40... Percentile Male § 572.40 Incorporated materials. (a) The drawings, specifications, manual, and computer... by reference. These materials are thereby made part of this regulation. The Director of the...

  14. 49 CFR 572.40 - Incorporated materials.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 49 Transportation 7 2011-10-01 2011-10-01 false Incorporated materials. 572.40 Section 572.40... Percentile Male § 572.40 Incorporated materials. (a) The drawings, specifications, manual, and computer... by reference. These materials are thereby made part of this regulation. The Director of the...

  15. 49 CFR 572.40 - Incorporated materials.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... 49 Transportation 7 2013-10-01 2013-10-01 false Incorporated materials. 572.40 Section 572.40... Percentile Male § 572.40 Incorporated materials. (a) The drawings, specifications, manual, and computer... by reference. These materials are thereby made part of this regulation. The Director of the...

  16. 49 CFR 572.40 - Incorporated materials.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... 49 Transportation 7 2012-10-01 2012-10-01 false Incorporated materials. 572.40 Section 572.40... Percentile Male § 572.40 Incorporated materials. (a) The drawings, specifications, manual, and computer... by reference. These materials are thereby made part of this regulation. The Director of the...

  17. Incorporating User Search Behavior into Relevance Feedback.

    ERIC Educational Resources Information Center

    Ruthven, Ian; Lalmas, Mounia; van Rijsbergen, Keith

    2003-01-01

    Presents five user experiments on incorporating behavioral information into the relevance feedback process in information retrieval, concentrating on ranking terms for query expansion and selecting new terms to add to the user's query. Topics include term ranking and user behavior; incorporating user behavior into term ranking; and user behavior…

  18. Incorporating Sociology into Community Service Classes

    ERIC Educational Resources Information Center

    Hochschild, Thomas R., Jr.; Farley, Matthew; Chee, Vanessa

    2014-01-01

    Sociologists and instructors who teach about community service share an affinity for understanding and addressing social problems. While many studies have demonstrated the benefits of incorporating community service into sociology courses, we examine the benefits of incorporating sociological content into community service classes. The authors…

  19. Tapping private industry.

    PubMed

    Weerakoon, B

    1986-12-01

    Many firms throughout Japan and around the world have come to realize that family planning is good for employee morale and company profits. Japanese and Indian efforts prove that family planning programs not only bring welfare benefits to workers, but commercial advantages to businesses. Because workers' family welfare is closely linked to labor welfare and productivity, the trade union movement has started to become active in promoting family planning activities. Factory-based family planning programs have often cut pregnancy rates in half. Godrej Enterprises of India started promoting family planning in 1957; it provides a model of how family planning has been incorporated into a comprehensive employee welfare system in a factory complex on the outskirts of Bombay, where about 1/2 the workers live in high-rise apartments in the company township of Pirojsha Nagar. Similar programs are presented in India, Thailand, Indonesia, Jamaica, Guatemala, Colombia, Korea, and Turkey. Limiting family size enriches workers' lives and improves the quality of the workforce. The International Labor Organization, through its Workers' Education Program on Population, has played an important role in stimulating industrial sector interest in family planning throughout the world.

  20. Chemical Industry Corrosion Management

    SciTech Connect

    2003-02-01

    Improved Corrosion Management Could Provide Significant Cost and Energy Savings for the Chemical Industry. In the chemical industry, corrosion is often responsible for significant shutdown and maintenance costs.

  1. 42 CFR 137.328 - Must a construction project proposal incorporate provisions of Federal construction guidelines...

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... standards (including national, regional, State, or Tribal building codes or construction industry standards... 42 Public Health 1 2013-10-01 2013-10-01 false Must a construction project proposal incorporate provisions of Federal construction guidelines and manuals? 137.328 Section 137.328 Public Health PUBLIC...

  2. 25 CFR 900.126 - Shall a construction contract proposal incorporate provisions of Federal construction guidelines...

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ..., State, or tribal building codes or construction industry standards) are consistent with or exceed... 25 Indians 2 2012-04-01 2012-04-01 false Shall a construction contract proposal incorporate provisions of Federal construction guidelines and manuals? 900.126 Section 900.126 Indians BUREAU OF INDIAN...

  3. 42 CFR 137.328 - Must a construction project proposal incorporate provisions of Federal construction guidelines...

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... standards (including national, regional, State, or Tribal building codes or construction industry standards... 42 Public Health 1 2011-10-01 2011-10-01 false Must a construction project proposal incorporate provisions of Federal construction guidelines and manuals? 137.328 Section 137.328 Public Health PUBLIC...

  4. 42 CFR 137.328 - Must a construction project proposal incorporate provisions of Federal construction guidelines...

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... standards (including national, regional, State, or Tribal building codes or construction industry standards... 42 Public Health 1 2014-10-01 2014-10-01 false Must a construction project proposal incorporate provisions of Federal construction guidelines and manuals? 137.328 Section 137.328 Public Health PUBLIC...

  5. 42 CFR 137.328 - Must a construction project proposal incorporate provisions of Federal construction guidelines...

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... standards (including national, regional, State, or Tribal building codes or construction industry standards... 42 Public Health 1 2010-10-01 2010-10-01 false Must a construction project proposal incorporate provisions of Federal construction guidelines and manuals? 137.328 Section 137.328 Public Health PUBLIC...

  6. 25 CFR 900.126 - Shall a construction contract proposal incorporate provisions of Federal construction guidelines...

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ..., State, or tribal building codes or construction industry standards) are consistent with or exceed... 25 Indians 2 2011-04-01 2011-04-01 false Shall a construction contract proposal incorporate provisions of Federal construction guidelines and manuals? 900.126 Section 900.126 Indians BUREAU OF INDIAN...

  7. 25 CFR 900.126 - Shall a construction contract proposal incorporate provisions of Federal construction guidelines...

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ..., State, or tribal building codes or construction industry standards) are consistent with or exceed... 25 Indians 2 2014-04-01 2014-04-01 false Shall a construction contract proposal incorporate provisions of Federal construction guidelines and manuals? 900.126 Section 900.126 Indians BUREAU OF INDIAN...

  8. 25 CFR 900.126 - Shall a construction contract proposal incorporate provisions of Federal construction guidelines...

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ..., State, or tribal building codes or construction industry standards) are consistent with or exceed... 25 Indians 2 2010-04-01 2010-04-01 false Shall a construction contract proposal incorporate provisions of Federal construction guidelines and manuals? 900.126 Section 900.126 Indians BUREAU OF INDIAN...

  9. 42 CFR 137.328 - Must a construction project proposal incorporate provisions of Federal construction guidelines...

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... standards (including national, regional, State, or Tribal building codes or construction industry standards... 42 Public Health 1 2012-10-01 2012-10-01 false Must a construction project proposal incorporate provisions of Federal construction guidelines and manuals? 137.328 Section 137.328 Public Health PUBLIC...

  10. 25 CFR 900.126 - Shall a construction contract proposal incorporate provisions of Federal construction guidelines...

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ..., State, or tribal building codes or construction industry standards) are consistent with or exceed... 25 Indians 2 2013-04-01 2013-04-01 false Shall a construction contract proposal incorporate provisions of Federal construction guidelines and manuals? 900.126 Section 900.126 Indians BUREAU OF INDIAN...

  11. A View of Industry.

    ERIC Educational Resources Information Center

    Swanson, Richard A., Ed.; And Others

    This monograph describes industry at a point in time from the perspective of the faculty in Industrial Education at the University of Minnesota. Section 1 describes the effort to define industry from the perspective of the industrial, business, and economic literature. The remainder of this section is divided into the two components of analysis…

  12. 2001 Industry Studies: Munitions

    DTIC Science & Technology

    2001-01-01

    industry can pay, and the munitions industry has difficulty providing the lucrative stock options and other equity attractions that other industries...improve the financial strength of the munitions industry, and result in an enhanced ability to provide stock options and equity attractions to both

  13. The energy efficient industrialized housing research program

    SciTech Connect

    Brown, G.Z.

    1990-01-01

    The United states housing industry is undergoing a metamorphosis from hand built to factory built products. Virtually all new housing incorporates manufactured components; indeed, an increasing percentage is totally assembled in a factory. The factory-built process offers the promise of houses that are more energy efficient, of higher quality, and less costly. To ensure that this promise can be met, the US industry must begin to develop and use new technologies, new design strategies, and new industrial processes. However, the current fragmentation of the industry makes research by individual companies prohibitively expensive, and retards innovation. This research program addresses the need to increase the energy efficiency of industrialized housing. Two research centers have responsibility for the program: the Center for Housing Innovation at the University of Oregon and the Florida Solar Energy Center, a research institute of the University of Central Florida. The two organizations provide complementary architectural, systems engineering, and industrial engineering capabilities. In 1989 we worked on these tasks: the formation of a steering committee; the development of a multiyear research plan; analysis of the US industrialized housing industry; assessment of foreign technology; assessment of industrial applications; analysis of computerized design and evaluation tools; and assessment of energy performance of baseline and advanced industrialized housing concepts. Our goal is to develop techniques to produce marketable industrialized housing that is 25% more energy efficient that the most stringent US residential codes now require, and that costs less. Energy efficiency is the focus of the research, but it is viewed in the context of production and design. 63 refs.

  14. Industry Study, Electronics Industry, Spring 2009

    DTIC Science & Technology

    2009-01-01

    environment. We will develop these observations, and others, in the course of this paper. We are first going to establish context for the industry ...Taiwanese IC industry illustrates the best example of a world class IC CVVI concept. Specifically, TSMC co- develops advanced-technology designs with their...technology node. Significant expenditures by industry and government are required to educate new intellectual talent, perform research and development

  15. 78 FR 60784 - Incorporation By Reference

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-10-02

    ...On February 13, 2012, the Office of the Federal Register received a petition to amend our regulations governing the approval of agency requests to incorporate material by reference into the Code of Federal Regulations. We agree with the petitioners that our regulations need to be updated, however the petitioners proposed changes to our regulations that go beyond our statutory authority. In this document, we propose that agencies seeking the Director's approval of their incorporation by reference requests add more information regarding materials incorporated by reference to the preambles of their rulemaking documents. We propose that they set out in the preambles a discussion of the actions they took to ensure the materials are reasonably available to interested parties or summarize the contents of the materials they wish to incorporate by reference.

  16. Plant-Incorporated Protectants Data Symposium

    EPA Pesticide Factsheets

    EPA held a public symposium on data that support registration of plant incorporated protectants (PIPs). It provided firsthand information on the scope of the scientific review process regarding the safety of PIPs and on the pesticide registration process.

  17. Defence Industrial Strategy

    DTIC Science & Technology

    2005-12-01

    make clear which industrial capabilities we need to have onshore (and this includes those maintained by foreign- owned defence companies), industry...industry to deliver the complex system of systems that will make up the Future Rapid Effects System (FRES) fleet. xxi. It is questionable whether... make clear which industrial capabilities we need to have onshore (and this includes those maintained by foreign- owned defence companies), industry may

  18. TARDEC Industrial Base Overview

    DTIC Science & Technology

    2010-11-30

    TARDEC Industrial Base Overview Randal Gaereminck, Associate Director, Industrial Base, Manufacturing, Logistics, & Value Engineering TARDEC...8-98) Prescribed by ANSI Std Z39-18 PURPOSE 2 To inform the conference attendees about TARDEC’s Industrial Base Mission and Capabilities AGENDA 3...Partnership • IBIT Policy Benefits • IBIT Mission • Industrial Base Engineering Support • Sustainment Engineering – Obsolescence • Industrial Base Engineering

  19. Composites incorporated a conductive polymer nanofiber network

    DOEpatents

    Pozzo, Lilo Danielle; Newbloom, Gregory

    2017-04-11

    Methods of forming composites that incorporate networks of conductive polymer nanofibers are provided. Networks of less-than conductive polymers are first formed and then doped with a chemical dopant to provide networks of conductive polymers. The networks of conductive polymers are then incorporated into a matrix in order to improve the conductivity of the matrix. The formed composites are useful as conductive coatings for applications including electromagnetic energy management on exterior surfaces of vehicles.

  20. A Suggested Planned Course in Industrial Arts; Grades 7 and 8. Reprint.

    ERIC Educational Resources Information Center

    Pennsylvania State Dept. of Education, Harrisburg. Bureau of Curriculum Services.

    The Pennsylvania industrial arts curriculum guide for grades 7 and 8 reflects changing philosophy and practices in industrial arts education as well as incorporating the effect of technological changes. Objectives unique to industrial arts education are: (1) to develop literacy in a technological civilization, (2) to develop an insight and…

  1. Nanotechnology impact on the automotive industry.

    PubMed

    Wong, Kaufui V; Paddon, Patrick A

    2014-01-01

    Nanotechnology has been implemented widely in the automotive industry. This technology is particularly useful in coatings, fabrics, structural materials, fluids, lubricants, tires, and preliminary applications in smart glass/windows and video display systems. A special sub-class of improved materials, alternative energy, has also seen a boost from advances in nanotechnology, and continues to be an active research area. A correlation exists in the automotive industry between the areas with increased nanotechnology incorporation and those with increased profit margins via improvements and customer demands.

  2. Systems study of transport aircraft incorporating advanced aluminum alloys

    NASA Technical Reports Server (NTRS)

    Sakata, I. F.

    1982-01-01

    A study was performed to quantify the potential benefits of utilizing advanced aluminum alloys in commercial transport aircraft and to define the effort necessary to develop fully the alloys to a viable commercial production capability. The comprehensive investigation (1) established realistic advanced aluminum alloy property goals to maximize aircraft systems effectiveness (2) identified performance and economic benefits of incorporating the advanced alloy in future advanced technology commercial aircraft designs (3) provided a recommended plan for development and integration of the alloys into commercial aircraft production (4) provided an indication of the timing and investigation required by the metal producing industry to support the projected market and (5) evaluate application of advanced aluminum alloys to other aerospace and transit systems as a secondary objective. The results of the investigation provided a roadmap and identified key issues requiring attention in an advanced aluminum alloy and applications technology development program.

  3. Industry Participation in Defence Research and Development,

    DTIC Science & Technology

    1983-12-01

    a proposal to extend the powers of the Australian Industry Development Corporation ( AIDC ) to increase the Corporation’s activities in the provision...the proposal to extend the powers of th AIDC to fill this role. Recommendation 2 a. That the Government develop a single venture capital institution in...Corporation ( AIDC ) be extended to enable the development of its venture capital activities; and c. That businesses financed though AIDC have the right to

  4. Incorporating new materials and techniques into clinical practice.

    PubMed

    Pitts, N B; Drummond, J; Guggenberger, R; Ferrillo, P; Johnston, S

    2013-11-01

    This article outlines the subjects presented and discussed at the December 2012 IADR Dental Materials Innovation Workshop held at King's College London. Incorporating new materials and techniques into clinical practice was considered from 4 perspectives: (1) Accelerating the "research to regulatory approval" process was presented with current developments in the United States, with the National Institutes of Health/Food and Drug Administration process as a working example; (2) intellectual property and regulatory requirements were discussed across the well-established US and EU frameworks, as well as the more recently developed procedures across Brazil, Russia, India, and China; (3) the challenges and opportunities of incorporating innovations into dental education were considered with reference to the future needs of both students and faculty; and (4) the key but difficult and unpredictable step of translating such innovations into routine dental practice was then explored. Constructive and far-ranging discussion among the broadly based Workshop participants (from dental research, education, practice, and industry, as well as environmental organizations and the World Health Organization) mapped out key issues for the future. The focus was on facilitating the more timely adoption of improvements in both materials and techniques to improve patient health and health systems, while minimizing environmental impact.

  5. Characterization of active paper packaging incorporated with ginger pulp oleoresin

    NASA Astrophysics Data System (ADS)

    Wiastuti, T.; Khasanah, L. U.; Atmaka Kawiji, W.; Manuhara, G. J.; Utami, R.

    2016-02-01

    Utilization of ginger pulp waste from herbal medicine and instant drinks industry in Indonesia currently used for fertilizer and fuel, whereas the ginger pulp still contains high oleoresin. Active paper packaging were developed incorporated with ginger pulp oleoresin (0%, 2%, 4%, and 6% w/w). Physical (thickness, tensile strength, and folding endurance, moisture content), sensory characteristics and antimicrobial activity of the active paper were evaluated. Selected active paper then were chemically characterized (functional groups). The additional of ginger pulp oleoresin levels are reduced tensile strength, folding endurance and sensory characteristic (color, texture and overall) and increased antimicrobial activity. Due to physical, sensory characteristic and antimicrobial activity, active paper with 2% ginger pulp oleoresin incorporation was selected. Characteristics of selected paper were 9.93% of water content; 0.81 mm of thickness; 0.54 N / mm of tensile strength; 0.30 of folding endurance; 8.43 mm inhibits the growth of Pseudomonas fluorescence and 27.86 mm inhibits the growth of Aspergillus niger (antimicrobial activity) and neutral preference response for sensory properties. For chemical characteristic, selected paper had OH functional group of ginger in 3422.83 cm-1 of wave number and indicated contain red ginger active compounds.

  6. Development of thermoplastic starch blown film by incorporating plasticized chitosan.

    PubMed

    Dang, Khanh Minh; Yoksan, Rangrong

    2015-01-22

    The objective of the present work was to improve blown film extrusion processability and properties of thermoplastic starch (TPS) film by incorporating plasticized chitosan, with a content of 0.37-1.45%. The effects of chitosan on extrusion processability and melt flow ability of TPS, as well as that on appearance, optical properties, thermal properties, viscoelastic properties and tensile properties of the films were investigated. The possible interactions between chitosan and starch molecules were evaluated by FTIR and XRD techniques. Chitosan and starch molecules could interact via hydrogen bonds, as confirmed from the blue shift of OH bands and the reduction of V-type crystal formation. Although the incorporation of chitosan caused decreased extensibility and melt flow ability, as well as increased yellowness and opacity, the films possessed better extrusion processability, increased tensile strength, rigidity, thermal stability and UV absorption, as well as reduced water absorption and surface stickiness. The obtained TPS/chitosan-based films offer real potential application in the food industry, e.g. as edible films. Copyright © 2014 Elsevier Ltd. All rights reserved.

  7. Teaching Teachers Industrial Organic

    ERIC Educational Resources Information Center

    Chemical and Engineering News, 1977

    1977-01-01

    Describes a teacher seminar held at the University of Minnesota to introduce the addition of courses of industrial chemistry into higher education science curriculums in order to better prepare college science graduates for positions in industry. (SL)

  8. Industrial storage applications overview

    NASA Technical Reports Server (NTRS)

    Duscha, R. A.

    1980-01-01

    The implementation of a technology demonstration for the food processing industry, development and technology demonstrations for selected near-term, in-plant applications and advanced industrial applications of thermal energy storage are overviewed.

  9. The World Oil Industry

    ERIC Educational Resources Information Center

    Rand, Christopher T.

    1976-01-01

    America's domestic petroleum industry and the international industry have been dominated by seven major firms. Although production costs decreased, sale prices soared with developing political-corporate interrelationships. (MR)

  10. The World Oil Industry

    ERIC Educational Resources Information Center

    Rand, Christopher T.

    1976-01-01

    America's domestic petroleum industry and the international industry have been dominated by seven major firms. Although production costs decreased, sale prices soared with developing political-corporate interrelationships. (MR)

  11. The Industry That Can.

    ERIC Educational Resources Information Center

    Aguirre, Edward

    This speech by the U.S. Commissioner of Education reviews the education industry and education-industry relations. Examples illustrate the effective partnership that can be created to fashion and achieve successful vocational and career education programs. (MML)

  12. Industrial Training Today

    ERIC Educational Resources Information Center

    Castle, Barbara

    1970-01-01

    This address reviews successes achieved during the 1960s in several areas of British industrial training. It then discusses problems and opportunities relating to levy and grant policies, training methods, retraining, commercial training, and industrial relations training. (LY)

  13. Teaching Teachers Industrial Organic

    ERIC Educational Resources Information Center

    Chemical and Engineering News, 1977

    1977-01-01

    Describes a teacher seminar held at the University of Minnesota to introduce the addition of courses of industrial chemistry into higher education science curriculums in order to better prepare college science graduates for positions in industry. (SL)

  14. METHANE: INDUSTRIAL SOURCES

    EPA Science Inventory

    The chapter provides qualitative information on the magnitude of industrial sources of methane and, where possible, provides information to allow the reader to quantify methane emissions. One difficulty in quantifying methane emissions from industry is the inconsistent treatment ...

  15. Therapy for incorporated radionuclides: scope and need

    SciTech Connect

    Smith, V.H.

    1981-03-01

    In the United States the recent termination of funding for research on therapy for incorporated radionuclides has virtually halted progress on improved or new agents and procedures for removing radioactivity from the body. Research was eliminated, but is still needed on new removal agents, improved delivery system, in vitro test systems, and the toxicology of treatments. For many radionuclides, no adequate therapy exists. The relationship between radionuclide removal and reduction in cancer risk is still unanswered. Without proper research support, needed improvements in the treatment for incorporated radionuclides in the US are uncertain.

  16. Robotics and Industrial Arts.

    ERIC Educational Resources Information Center

    Edmison, Glenn A.; And Others

    Robots are becoming increasingly common in American industry. By l990, they will revolutionize the way industry functions, replacing hundreds of workers and doing hot, dirty jobs better and more quickly than the workers could have done them. Robotics should be taught in high school industrial arts programs as a major curriculum component. The…

  17. 2011 Training Industry Report

    ERIC Educational Resources Information Center

    Training, 2011

    2011-01-01

    This article presents "Training" magazine's exclusive analysis of the U.S. training industry, featuring 2011 training expenditures, budgetary allocations, delivery methods, and training priorities. Now in its 30th year, The Industry Report is recognized as the training industry's most trusted source of data on budgets, staffing, and…

  18. California's forest industry, 1976.

    Treesearch

    Bruce A. Hiserote; James O. Howard

    1978-01-01

    This report presents the findings of a 100-percent canvas of the primary forest products industry in California for 1976. Tabular presentation includes characteristics of the industry log consumption and disposition of mill residues. Accompanying the tables is a descriptive analysis of conditions and trends in the industry.

  19. Oklahoma forest industries, 1984

    Treesearch

    Dennis M. May

    1986-01-01

    This publication reports the findings of a 100 percent canvass of Oklahoma's forest industries in 1984. The production and receipts of industrial roundwood are reported by product, species group, and county. The production and disposition of mill residues generated hy Oklahoma's forest industries are also reported. Roundwood and residue production changes...

  20. Industrial Fire Brigade Training.

    ERIC Educational Resources Information Center

    North Carolina State Dept. of Community Colleges, Raleigh.

    Organized as a teaching outline for an industrial plant fire brigade course, this manual contains a rationale for an industrial plant brigade as an adjunct to the local firefighting services; information to the instructor concerning the implementation of an industrial fire brigade program; and a teaching outline consisting of eleven sections: (1)…

  1. Midsouth veneer industry

    Treesearch

    Dennis M. May; John S. Vissage

    1990-01-01

    The USDA Forest Service, Southern Forest Experiment Station's latest survey of the Midsouth veneer industry shows the softwood veneer industry continuing its dominance as the hardwood veneer industry has continued to decline. The number of softwood mills has stabilized after years of growth, while both commercial and container hardwood mills have decreased in...

  2. 2001 Industry Studies: Aircraft

    DTIC Science & Technology

    2001-01-01

    transnational alliances. Additional Topics The Aircraft Industry, Globalization, and E - commerce - CDR Mike Steinmetz, USN The effect of the...information age, globalization, and e - commerce is pervasive throughout the domestic and international aircraft industry. From advanced collaborative aircraft...Magazine Department of Commerce General Electric Aircraft Engines Merrill Lynch Aerospace Marketing Teal Group 3 INTRODUCTION The aircraft industry is

  3. FOSSIL FUEL INDUSTRIES

    EPA Science Inventory

    The chapter focuses on methane emissions from the coal and natural gas industries. The petroleum industry is not addressed because of the lack of related quality data. Emission points are identified for each industry, and a discussion of factors affecting emissions is presented. ...

  4. FOSSIL FUEL INDUSTRIES

    EPA Science Inventory

    The chapter focuses on methane emissions from the coal and natural gas industries. The petroleum industry is not addressed because of the lack of related quality data. Emission points are identified for each industry, and a discussion of factors affecting emissions is presented. ...

  5. Functions of Industry.

    ERIC Educational Resources Information Center

    Georgia Southern Coll., Statesboro.

    Intended for teachers of industrial arts in teaching the functions of industry, this course of study was compiled as a result of the EPDA Institute in Industrial and Career Development at Georgia Southern College. Contents are: (1) Introduction, (2) Organization, (3) Research and Development, (4) Production, (5) Marketing, (6) Finance and Control,…

  6. Photovoltaics industry profile

    SciTech Connect

    1980-10-01

    A description of the status of the US photovoltaics industry is given. Principal end-user industries are identified, domestic and foreign market trends are discussed, and industry-organized and US government-organized trade promotion events are listed. Trade associations and trade journals are listed, and a photovoltaic product manufacturers list is included. (WHK)

  7. 2011 Training Industry Report

    ERIC Educational Resources Information Center

    Training, 2011

    2011-01-01

    This article presents "Training" magazine's exclusive analysis of the U.S. training industry, featuring 2011 training expenditures, budgetary allocations, delivery methods, and training priorities. Now in its 30th year, The Industry Report is recognized as the training industry's most trusted source of data on budgets, staffing, and…

  8. Incorporating Non-energy Benefits into Energy Savings Performance Contracts

    SciTech Connect

    Larsen, Peter; Goldman, Charles; Gilligan, Donald; Singer, Terry

    2012-06-01

    This paper evaluates the issue of non-energy benefits within the context of the U.S. energy services company (ESCO) industry?a growing industry comprised of companies that provide energy savings and other benefits to customers through the use of performance-based contracting. Recent analysis has found that ESCO projects in the public/institutional sector, especially at K-12 schools, are using performance-based contracting, at the behest of the customers, to partially -- but not fully -- offset substantial accumulated deferred maintenance needs (e.g., asbestos removal, wiring) and measures that have very long paybacks (roof replacement). This trend is affecting the traditional economic measures policymakers use to evaluate success on a benefit to cost basis. Moreover, the value of non-energy benefits which can offset some or all of the cost of the non-energy measures -- including operations and maintenance (O&M) savings, avoided capital costs, and tradable pollution emissions allowances-- are not always incorporated into a formal cost-effectiveness analysis of ESCO projects. Nonenergy benefits are clearly important to customers, but state and federal laws that govern the acceptance of these types of benefits for ESCO projects vary widely (i.e., 0-100percent of allowable savings can come from one or more non-energy categories). Clear and consistent guidance on what types of savings are recognized in Energy Savings agreements under performance contracts is necessary, particularly where customers are searching for deep energy efficiency gains in the building sector.

  9. Industry`s turnaround looks real

    SciTech Connect

    1997-08-01

    The paper discusses the industry outlook for North American gas and oil industries. In a robust Canada, land sales are setting records, drilling is up, and output is rising beyond last year`s 21% growth. A perception among US operators that wellhead prices will remain stable is translating to increased spending. The USA, Canada, Mexico, Cuba are evaluated separately, with brief evaluations of Greenland, Guatemala, Belize, and Costa Rico. Data are presented on drilling activities.

  10. Shipbuilding Industry, Industry Study, Spring 2009

    DTIC Science & Technology

    2009-01-01

    Heavy Industries, Ulsan, KS Hyundai Automotive, Ulsan, KS Samsung Shipyard, Geoje, KS 3 INTRODUCTION The ability of a maritime nation to...labor; thus the industry has shifted its production base from Europe to Asia. Within Asia there has been an intense competition between South...combined accounted for 77.9 percent of global production in 2006. 4 In 2008, South Korean shipbuilders continued to dominate the construction of all

  11. Spring 2008 Industry Study: Aircraft Industry

    DTIC Science & Technology

    2008-01-01

    on maintenance, refurbishment, and upgrades of existing aircraft to earn money and maintain their expertise. Because USAF tankers have historically...which would use satellite-based air traffic management , digital non-voice communication, and advanced networking to significantly reduce flight time...further reduce noise and emissions. Workforce Management Issues. The aerospace industry in the US, of which the aircraft industry is the largest part

  12. Incorporating Social Media in the Classroom

    ERIC Educational Resources Information Center

    McMeans, April

    2015-01-01

    Incorporating social media into the classroom will provide a positive, upbeat learning environment that students are engaged in on a regular basis. In doing this, educators will be ensuring discussion, collaboration, critical thinking, and creativity amongst their students. Social media is a knowledgeable topic for our students, and it is an…

  13. 49 CFR 572.30 - Incorporated materials.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... 49 Transportation 7 2014-10-01 2014-10-01 false Incorporated materials. 572.30 Section 572.30 Transportation Other Regulations Relating to Transportation (Continued) NATIONAL HIGHWAY TRAFFIC SAFETY ADMINISTRATION, DEPARTMENT OF TRANSPORTATION (CONTINUED) ANTHROPOMORPHIC TEST DEVICES Hybrid III Test Dummy §...

  14. Incorporating the Aesthetic Dimension into Pedagogy

    ERIC Educational Resources Information Center

    Webster, R. Scott; Wolfe, Melissa

    2013-01-01

    This paper reports on a case study that was undertaken to discover not only the belief and intent behind the everyday opportunities that four exemplary teachers offered their high performing students but what activities they incorporated into their everyday lessons in an attempt to make sense of how aesthetic experiences may enhance learning. The…

  15. Incorporating groundwater flow into the WEPP model

    Treesearch

    William Elliot; Erin Brooks; Tim Link; Sue Miller

    2010-01-01

    The water erosion prediction project (WEPP) model is a physically-based hydrology and erosion model. In recent years, the hydrology prediction within the model has been improved for forest watershed modeling by incorporating shallow lateral flow into watershed runoff prediction. This has greatly improved WEPP's hydrologic performance on small watersheds with...

  16. Incorporating landscape stochasticity into population viability analysis.

    PubMed

    Chisholm, Ryan A; Wintle, Brendan A

    2007-03-01

    The importance of incorporating landscape dynamics into population viability analysis (PVA) has previously been acknowledged, but the need to repeat the landscape generation process to encapsulate landscape stochasticity in model outputs has largely been overlooked. Reasons for this are that (1) there is presently no means for quantifying the relative effects of landscape stochasticity and population stochasticity on model outputs, and therefore no means for determining how to allocate simulation time optimally between the two; and (2) the process of generating multiple landscapes to incorporate landscape stochasticity is tedious and user-intensive with current PVA software. Here we demonstrate that landscape stochasticity can be an important source of variance in model outputs. We solve the technical problems with incorporating landscape stochasticity by deriving a formula that gives the optimal ratio of population simulations to landscape simulations for a given model, and by providing a computer program that incorporates the formula and automates multiple landscape generation in a dynamic landscape metapopulation (DLMP) model. Using a case study of a bird population, we produce estimates of DLMP model output parameters that are up to four times more precise than those estimated from a single landscape in the same amount of total simulation time. We use the DLMP modeling software RAMAS Landscape to run the landscape and metapopulation models, though our method is general and could be applied to any PVA platform. The results of this study should motivate DLMP modelers to consider landscape stochasticity in their analyses.

  17. 49 CFR 572.180 - Incorporated materials.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ...,” incorporated by reference in §§ 572.180(a)(2), and 572.181(a); (4) Society of Automotive Engineers (SAE) Recommended Practice J211, Rev. Mar 95 “Instrumentation for Impact Tests—Part 1—Electronic Instrumentation... the National Archives and Records Administration (NARA), and in electronic format through...

  18. Design of Schools to Incorporate Fallout Protection.

    ERIC Educational Resources Information Center

    Folley, Milo D.

    Means are suggested by which a school district may incorporate low-cost fallout protection in a school construction program, through construction of an underground shelter beneath the concrete slab foundation. Ways of controlling distribution and filtering air are discussed. The author also suggests consideration of a completely underground…

  19. Curriculum Reformulation: Incorporating Technology into Science Instruction.

    ERIC Educational Resources Information Center

    Linn, Marcia C.; Songer, Nancy Butler

    To increase the connection between educational research and educational practice, a process called "curriculum reformulation" was used to incorporate recent advances in research on learning and instruction into science classroom experiences. The cognitive demands of a thermodynamics curriculum were successively refined while maintaining…

  20. Semiconducting compounds and devices incorporating same

    DOEpatents

    Marks, Tobin J.; Facchetti, Antonio; Boudreault, Pierre-Luc; Miyauchi, Hiroyuki

    2016-01-19

    Disclosed are molecular and polymeric compounds having desirable properties as semiconducting materials. Such compounds can exhibit desirable electronic properties and possess processing advantages including solution-processability and/or good stability. Organic transistor and photovoltaic devices incorporating the present compounds as the active layer exhibit good device performance.

  1. Semiconducting compounds and devices incorporating same

    DOEpatents

    Marks, Tobin J; Facchetti, Antonio; Boudreault, Pierre-Luc; Miyauchi, Hiroyuki

    2014-06-17

    Disclosed are molecular and polymeric compounds having desirable properties as semiconducting materials. Such compounds can exhibit desirable electronic properties and possess processing advantages including solution-processability and/or good stability. Organic transistor and photovoltaic devices incorporating the present compounds as the active layer exhibit good device performance.

  2. The Incorporation and Abjection of Official Knowledge

    ERIC Educational Resources Information Center

    Kearl, Benjamin Kelsey

    2012-01-01

    In this essay, the author analyzes two theoretical perspectives--incorporation and abjection--that inform official knowledge generally and high school American history textbooks specifically. While contemporary textbooks increasingly depict the experiences of historically marginalized groups such as women, African Americans, Latinos, American…

  3. Combined cycle power plant incorporating coal gasification

    DOEpatents

    Liljedahl, Gregory N.; Moffat, Bruce K.

    1981-01-01

    A combined cycle power plant incorporating a coal gasifier as the energy source. The gases leaving the coal gasifier pass through a liquid couplant heat exchanger before being used to drive a gas turbine. The exhaust gases of the gas turbine are used to generate both high pressure and low pressure steam for driving a steam turbine, before being exhausted to the atmosphere.

  4. 49 CFR 572.190 - Incorporated materials.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... Impact Crash Test Dummy, July 1, 2008,” incorporated by reference in § 572.191; (4) SAE Recommended...) SAE J1733 of 1994-12, “Sign Convention for Vehicle Crash Testing.” (b) The Director of the Federal... 20879, (301) 670-0090. (2) The SAE materials referred to in paragraphs (a)(4) and (a)(5) of this...

  5. 49 CFR 572.190 - Incorporated materials.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... Impact Crash Test Dummy, July 1, 2008,” incorporated by reference in § 572.191; (4) SAE Recommended...) SAE J1733 of 1994-12, “Sign Convention for Vehicle Crash Testing.” (b) The Director of the Federal... 20879, (301) 670-0090. (2) The SAE materials referred to in paragraphs (a)(4) and (a)(5) of this...

  6. 49 CFR 572.40 - Incorporated materials.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... 49 Transportation 7 2014-10-01 2014-10-01 false Incorporated materials. 572.40 Section 572.40 Transportation Other Regulations Relating to Transportation (Continued) NATIONAL HIGHWAY TRAFFIC SAFETY ADMINISTRATION, DEPARTMENT OF TRANSPORTATION (CONTINUED) ANTHROPOMORPHIC TEST DEVICES Side Impact Dummy...

  7. Incorporation of labeled small molecules into rubratoxin.

    PubMed

    Emeh, C O; Marth, E H

    1978-07-01

    A sterile glucose-mineral salts broth was inoculated with conidia of Penicillium rubrum P-13 and P-3290. Radiolabeled compounds were added to some cultures, these being incubated quiescently at 28 degrees C for 14 days. Other stationary cultures were grown for 21 days, received labeled compounds, and were then grown for 5 more days. The remaining cultures were inoculated with 72-h-old mycelial pellets, received labeled materials and were incubated with shaking for 60 h. Rubratoxin was resolved by thin-layer chromatography. Labeled [1(14)C]acetate, [1,5(14)C]citrate, [2(14)C]malonate, [1(14)C]glucose, [U14C]glucose or [1(14)C]hexanoate were incorporated into rubratoxins A and B by P. rubrum 3290 and into rubratoxin B by P. rubrum 13. Incorporation of [1(14)C]acetate and [2(14)C]malonate increased when exogenous unlabeled acetate, malonate, pyruvate, or phosphoenol-pyruvate was added. Acetate incorporation was influenced by cultural conditions, attaining maximum amounts in quiescent cultures which received labeled acetate after 21 days of incubation. Acetate incorporation in shake cultures was enhanced by reduced nicotinamide adenine dinucleotide phosphate (NADPH) and by unlabeled exogenous citrate.

  8. Incorporating Engineering Design Challenges into STEM Courses

    ERIC Educational Resources Information Center

    Householder, Daniel L., Ed.; Hailey, Christine E., Ed.

    2012-01-01

    Successful strategies for incorporating engineering design challenges into science, technology, engineering, and mathematics (STEM) courses in American high schools are presented in this paper. The developers have taken the position that engineering design experiences should be an important component of the high school education of all American…

  9. Incorporating the National Standards in Performance Classes.

    ERIC Educational Resources Information Center

    Kerchner, Jody L.

    2001-01-01

    Addresses how the National Standards can be incorporated into band rehearsals using the music piece, "Balladair" (Frank Erickson), as an example when teaching techniques and musical concepts. Provides ideas such as using material from "Balladair" to create warm-ups or relating the piece to other arts. (CMK)

  10. Public Notice 2017-11: Cargill, Incorporated

    EPA Pesticide Factsheets

    Cargill, Incorporated, 518 East Fourth Street, Watkins Glen, New York 14891 has applied to the U.S. Environmental Protection Agency (EPA) under the provisions of the Safe Drinking Water Act, 42 U.S.C. 300f et. seq (the Act), for a new Underground Injection

  11. Incorporating the National Standards in Performance Classes.

    ERIC Educational Resources Information Center

    Kerchner, Jody L.

    2001-01-01

    Addresses how the National Standards can be incorporated into band rehearsals using the music piece, "Balladair" (Frank Erickson), as an example when teaching techniques and musical concepts. Provides ideas such as using material from "Balladair" to create warm-ups or relating the piece to other arts. (CMK)

  12. Incorporating biological control into IPM decision making

    USDA-ARS?s Scientific Manuscript database

    Of the many ways biological control can be incorporated into Integrated Pest Management (IPM) programs, natural enemy thresholds are arguably most easily adopted by stakeholders. Integration of natural enemy thresholds into IPM programs requires ecological and cost/benefit crop production data, thr...

  13. Incorporating Technology into a Hawaiian Language Curriculum.

    ERIC Educational Resources Information Center

    Ka'awa, Makalapua; Hawkins, Emily

    This paper describes Hawaiian language courses that incorporate computer technology at the University of Hawaii at Manoa. In the past decade, enrollments in all types of Hawaiian language programs have increased rapidly. The University of Hawaii is committed to extending Hawaiian language education, especially the full development of Hawaiian…

  14. Identification, Introjection, Incorporation, Internalization: A Bibliography.

    ERIC Educational Resources Information Center

    Pedrini, D. T.; Pedrini, Bonnie C.

    Identification, introjection, incorporation, and internalization dealt with the same basic process according to S. Freud. The process has been discussed and researched in many and varied personal-social contexts. There have been two general areas of concern: identification for positive reasons (often called developmental) and identification for…

  15. Incorporating Mobile Learning into Athletic Training Education

    ERIC Educational Resources Information Center

    Davie, Emily

    2009-01-01

    Objective: To introduce and present techniques for incorporating mobile learning into athletic training education. Background: The matriculation of digital natives into college has stimulated the identification and development of new teaching and learning strategies. Electronic learning (e-learning), including the use of learning management…

  16. Beyond Classroom Boundaries: Incorporating Context in Teaching.

    ERIC Educational Resources Information Center

    CATESOL Journal, 1994

    1994-01-01

    This English-as-a-Second-Language (ESL) journal periodically devotes entire issues to specific issues. The theme of this issue is "Incorporating Context in Teaching." Articles include: "Learning Beyond the Classroom: Developing the Community Connection" (Tim Beard); "Smiling through the Turbulence: The Flight Attendant Syndrome and Other Issues of…

  17. Incorporating Social Media in the Classroom

    ERIC Educational Resources Information Center

    McMeans, April

    2015-01-01

    Incorporating social media into the classroom will provide a positive, upbeat learning environment that students are engaged in on a regular basis. In doing this, educators will be ensuring discussion, collaboration, critical thinking, and creativity amongst their students. Social media is a knowledgeable topic for our students, and it is an…

  18. NE-TWIGS update: Incorporating tree quality

    Treesearch

    Daniel A. Yaussy

    1993-01-01

    A method to distribute tree quality was incorporated into the NE-TWIGS individual-tree growth and yield simulator. The program uses potential tree grade to allow changes in actual tree grade over time. Volume is reported by grade and value is calculated using tree grades. Example screens are shown.

  19. 49 CFR 587.5 - Incorporated materials.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... 49 Transportation 7 2014-10-01 2014-10-01 false Incorporated materials. 587.5 Section 587.5 Transportation Other Regulations Relating to Transportation (Continued) NATIONAL HIGHWAY TRAFFIC SAFETY ADMINISTRATION, DEPARTMENT OF TRANSPORTATION (CONTINUED) DEFORMABLE BARRIERS Side Impact Moving...

  20. Incorporating Feminism into Rehabilitation Counselor Education

    ERIC Educational Resources Information Center

    Jeon, Mookyong

    2015-01-01

    Purpose: The author describes how rehabilitation counselor educators can incorporate the feminist perspective in teaching rehabilitation counselors-in-training by exploring history, core values, and training methods of feminism. Method: Based on a literature review, the author compares philosophy and concepts of rehabilitation counseling and…

  1. Incorporating Mobile Learning into Athletic Training Education

    ERIC Educational Resources Information Center

    Davie, Emily

    2009-01-01

    Objective: To introduce and present techniques for incorporating mobile learning into athletic training education. Background: The matriculation of digital natives into college has stimulated the identification and development of new teaching and learning strategies. Electronic learning (e-learning), including the use of learning management…

  2. Incorporating Feminism into Rehabilitation Counselor Education

    ERIC Educational Resources Information Center

    Jeon, Mookyong

    2015-01-01

    Purpose: The author describes how rehabilitation counselor educators can incorporate the feminist perspective in teaching rehabilitation counselors-in-training by exploring history, core values, and training methods of feminism. Method: Based on a literature review, the author compares philosophy and concepts of rehabilitation counseling and…

  3. Incorporating Learning into the Cognitive Assessment Framework

    ERIC Educational Resources Information Center

    Studer, Cassandra; Junker, Brian; Chan, Helen

    2012-01-01

    The authors aimed to incorporate learning into the cognitive assessment framework that exists for static assessment data. In order to accomplish this, they derive a common likelihood function for dynamic models and introduce Parameter Driven Process for Change + Cognitive Diagnosis Model (PDPC + CDM), a dynamic model which tracks learning…

  4. Microbial incorporation of nitrogen in stream detritus

    Treesearch

    Diane M. Sanzone; Jennifer L. Tank; Judy L. Meyer; Patrick J. Mulholland; Stuart E.G. Findlay

    2001-01-01

    We adapted the chloroform fumigation method to determine microbial nitrogen (N) and microbial incorporation of 15N on three common substrates [leaves, wood and fine benthic organic matter (FBOM)] in three forest streams. We compared microbial N and 15 content of samples collected during a 6-week15N-NH...

  5. Genetic engineering of industrial Saccharomyces cerevisiae strains using a selection/counter-selection approach.

    PubMed

    Kutyna, Dariusz R; Cordente, Antonio G; Varela, Cristian

    2014-01-01

    Gene modification of laboratory yeast strains is currently a very straightforward task thanks to the availability of the entire yeast genome sequence and the high frequency with which yeast can incorporate exogenous DNA into its genome. Unfortunately, laboratory strains do not perform well in industrial settings, indicating the need for strategies to modify industrial strains to enable strain development for industrial applications. Here we describe approaches we have used to genetically modify industrial strains used in winemaking.

  6. Uranium industry annual 1994

    SciTech Connect

    1995-07-05

    The Uranium Industry Annual 1994 (UIA 1994) provides current statistical data on the US uranium industry`s activities relating to uranium raw materials and uranium marketing during that survey year. The UIA 1994 is prepared for use by the Congress, Federal and State agencies, the uranium and nuclear electric utility industries, and the public. It contains data for the 10-year period 1985 through 1994 as collected on the Form EIA-858, ``Uranium Industry Annual Survey.`` Data collected on the ``Uranium Industry Annual Survey`` (UIAS) provide a comprehensive statistical characterization of the industry`s activities for the survey year and also include some information about industry`s plans and commitments for the near-term future. Where aggregate data are presented in the UIA 1994, care has been taken to protect the confidentiality of company-specific information while still conveying accurate and complete statistical data. A feature article, ``Comparison of Uranium Mill Tailings Reclamation in the United States and Canada,`` is included in the UIA 1994. Data on uranium raw materials activities including exploration activities and expenditures, EIA-estimated resources and reserves, mine production of uranium, production of uranium concentrate, and industry employment are presented in Chapter 1. Data on uranium marketing activities, including purchases of uranium and enrichment services, and uranium inventories, enrichment feed deliveries (actual and projected), and unfilled market requirements are shown in Chapter 2.

  7. Uranium industry annual 1998

    SciTech Connect

    1999-04-22

    The Uranium Industry Annual 1998 (UIA 1998) provides current statistical data on the US uranium industry`s activities relating to uranium raw materials and uranium marketing. It contains data for the period 1989 through 2008 as collected on the Form EIA-858, ``Uranium Industry Annual Survey.`` Data provides a comprehensive statistical characterization of the industry`s activities for the survey year and also include some information about industry`s plans and commitments for the near-term future. Data on uranium raw materials activities for 1989 through 1998, including exploration activities and expenditures, EIA-estimated reserves, mine production of uranium, production of uranium concentrate, and industry employment, are presented in Chapter 1. Data on uranium marketing activities for 1994 through 2008, including purchases of uranium and enrichment services, enrichment feed deliveries, uranium fuel assemblies, filled and unfilled market requirements, and uranium inventories, are shown in Chapter 2. The methodology used in the 1998 survey, including data edit and analysis, is described in Appendix A. The methodologies for estimation of resources and reserves are described in Appendix B. A list of respondents to the ``Uranium Industry Annual Survey`` is provided in Appendix C. The Form EIA-858 ``Uranium Industry Annual Survey`` is shown in Appendix D. For the readers convenience, metric versions of selected tables from Chapters 1 and 2 are presented in Appendix E along with the standard conversion factors used. A glossary of technical terms is at the end of the report. 24 figs., 56 tabs.

  8. Metalcasting Industry Technology Roadmap

    SciTech Connect

    none,

    1998-01-01

    The Roadmap sets out the strategy for pursuing near-, mid-, and long-term goals set out by industry and for carrying out the cooperative agreement between the U.S. Department of Energy and industry. The Roadmap outlines key goals for products and markets, materials technology, manufacturing technology, environmental technology, human resources, and industry health programs. The Roadmap sets out the strategy for pursuing near-, mid-, and long-term goals set out by industry and for carrying out the cooperative agreement between the U.S. Department of Energy and industry. The Roadmap sets out the strategy for pursuing near-, mid-, and long-term goals set out by industry and for carrying out the cooperative agreement between the U.S. Department of Energy and industry.

  9. A Method for Calculating Industrial Mobilization Requirements Which Incorporates Production Process Times. Volume I. Main Report.

    DTIC Science & Technology

    1982-10-01

    final demand vector for defense based on the amount of the surge and the defense spending pattern. It time-phases that final demand vector based on when...the surge occurs and the planned end- item delivery schedule. 8 The resultant time-phased final demand vector is then passed through the input-output...number of commodities A = (aij) is the NxN nonnegative matrix representing the input-output coefficients Z = (z1 ) is the N vector representing final

  10. Worthington Industries, Incorporated, a Case Study in Employee Motivation Via Recognition and Profit Sharing.

    DTIC Science & Technology

    1983-09-01

    Dislikes Benefits (5) None (23) Profit sharing (4) Having to work overtime The challenge I don’t like the dress code Sports program Sometimes they’re bossy...Yes (24) No (dissatisfied over dress codes ) 22. In your opinion, is everyone here highly motivated? Why or why not? Part 1 For the most part, yes (23

  11. Polyethylene with Reverse Co-monomer Incorporation: From an Industrial Serendipitous Discovery to Fundamental Understanding

    PubMed Central

    Cicmil, Dimitrije; Meeuwissen, Jurjen; Vantomme, Aurélien; Wang, Jian; van Ravenhorst, Ilse K; van der Bij, Hendrik E; Muñoz-Murillo, Ara; Weckhuysen, Bert M

    2015-01-01

    A triethylaluminium(TEAl)-modified Phillips ethylene polymerisation Cr/Ti/SiO2 catalyst has been developed with two distinct active regions positioned respectively in the inner core and outer shell of the catalyst particle. DRIFTS, EPR, UV-Vis-NIR DRS, STXM, SEM-EDX and GPC-IR studies revealed that the catalyst produces simultaneously two different polymers, i.e., low molecular weight linear-chain polyethylene in the Ti-abundant catalyst particle shell and high molecular weight short-chain branched polyethylene in the Ti-scarce catalyst particle core. Co-monomers for the short-chain branched polymer were generated in situ within the TEAl-impregnated confined space of the Ti-scarce catalyst particle core in close proximity to the active sites that produced the high molecular weight polymer. These results demonstrate that the catalyst particle architecture directly affects polymer composition, offering the perspective of making high-performance polyethylene from a single reactor system using this modified Phillips catalyst. PMID:26349452

  12. Industry as the Content Base for Industrial Arts.

    ERIC Educational Resources Information Center

    Wright, R. Thomas

    1982-01-01

    Discusses industry-based industrial arts: components of this base; structure of the base; and organizing industry-based industrial arts programs using processing, management, and model enterprise modules. (CT)

  13. 46 CFR 105.01-3 - Incorporation by reference.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... COMMERCIAL FISHING VESSELS DISPENSING PETROLEUM PRODUCTS Administration § 105.01-3 Incorporation by reference..., Standard Test Method for Vapor Pressure of Petroleum Products (Reid Method), incorporation by...

  14. Artificial intelligence applications in the nuclear industry

    SciTech Connect

    Majumdar, D.

    1988-10-01

    This is a state-of-the-art review of artificial intelligence (AI) applications in the nuclear industry. It was initiated as a result of the American Nuclear Society-sponsored conference on ''Artificial Intelligence and Other Innovative Computer Applications in the Nuclear Industry,'' held in Snowbird, Utah, August 1987. This conference brought together a large number of international experts and showed extensive worldwide applications of expert systems in the nuclear industry. This document is a postconference review and a reflection on the current status and the future of AI in the nuclear industry. Because artificial intelligence techniques can analyze large and complex arrays of information, develop smaller sets of higher-level conclusions, incorporate human expertise, and present information suitable for human intelligence, it is very appropriate for applications in complex nuclear power plant operation. Some advances have already been made in several areas. However, among the many applications in the nuclear industry, there does not appear to be any outstanding application to date such as the ones found in the medical or geological fields. What comes out clearly is that the nuclear industry is experimenting in many areas with the expert system technology and determining its usefulness for the industry. On the international scene, the United States is the current leader in knowledge and applications, followed by Japan and France. However, the Japanese appear to have embraced the AI concept more wholeheartedly. This review encompasses a large number of areas including fault diagnosis, reactor control, plant operation, alarm filtering, accident management, robotics, probabilistic risk assessment, and the human element of expert systems. The potential for useful application of AI technology in the nuclear industry is shown to be promising. 383 refs., 13 figs., 11 tabs.

  15. Toxicity of sediment-incorporated drilling fluids

    SciTech Connect

    Clark, J.R.; Patrick, J.M.

    1987-01-01

    The 24, 96, or 168-h LC50s of four used drilling fluids or barite incorporated into sediment were determined in toxicity tests with lancelets (Branchiostoma caribaeum), a benthic chordate. The number of lancelets that did not burrow into contaminated sediments was used to calculate EC50s at the same times that LC50s were determined. Observations of the burrowing behavior allowed quantitation of effects after 24-h exposures to each of the drilling fluids whereas lancelet mortality was sufficient to calculate 24-h LC50s for only one drilling fluid. Drilling fluids were less toxic to lancelets when incorporated into sediments than to mysids (Mysidopsis bahia) or benthic invertebrate communities in water-column exposures.

  16. Incorporating Nonchemical Stressors Into Cumulative Risk Assessments

    PubMed Central

    Rider, Cynthia V.; Dourson, Michael L.; Hertzberg, Richard C.; Mumtaz, Moiz M.; Price, Paul S.; Simmons, Jane Ellen

    2012-01-01

    The role of nonchemical stressors in modulating the human health risk associated with chemical exposures is an area of increasing attention. On 9 March 2011, a workshop titled “Approaches for Incorporating Nonchemical Stressors into Cumulative Risk Assessment” took place during the 50th Anniversary Annual Society of Toxicology Meeting in Washington D.C. Objectives of the workshop included describing the current state of the science from various perspectives (i.e., regulatory, exposure, modeling, and risk assessment) and presenting expert opinions on currently available methods for incorporating nonchemical stressors into cumulative risk assessments. Herein, distinct frameworks for characterizing exposure to, joint effects of, and risk associated with chemical and nonchemical stressors are discussed. PMID:22345310

  17. Emissive sensors and devices incorporating these sensors

    DOEpatents

    Swager, Timothy M; Zhang, Shi-Wei

    2013-02-05

    The present invention generally relates to luminescent and/or optically absorbing compositions and/or precursors to those compositions, including solid films incorporating these compositions/precursors, exhibiting increased luminescent lifetimes, quantum yields, enhanced stabilities and/or amplified emissions. The present invention also relates to sensors and methods for sensing analytes through luminescent and/or optically absorbing properties of these compositions and/or precursors. Examples of analytes detectable by the invention include electrophiles, alkylating agents, thionyl halides, and phosphate ester groups including phosphoryl halides, cyanides and thioates such as those found in certain chemical warfare agents. The present invention additionally relates to devices and methods for amplifying emissions, such as those produced using the above-described compositions and/or precursors, by incorporating the composition and/or precursor within a polymer having an energy migration pathway. In some cases, the compositions and/or precursors thereof include a compound capable of undergoing a cyclization reaction.

  18. A Framework Incorporating Community Preferences in Use ...

    EPA Pesticide Factsheets

    The report is intended to assist water quality officials, watershed managers, members of stakeholder groups, and other interested individuals in fully evaluating ecological and socioeconomic objectives and the gains and losses that often are involved in use attainment decisions. In addition, this report enables local, state, and tribal managers to better understand the benefits, as well as the costs, of attaining high water quality, and to incorporate community preferences in decision-making. Specific objectives are (1) to provide an introduction to the CWA and WQS regulation and analyses related to setting or changing designated uses; (2) create a basis for understanding the relationship between use-attainment decisions and the effects on ecosystems, ecosystem services, and ecological benefits; (3) serve as reference for methods that elicit or infer preferences for benefits and costs related to attaining uses and (4) present process for incorporating new approaches in water quality decisions.

  19. Incorporating Virtual Teamwork Training into MIS Curricula

    ERIC Educational Resources Information Center

    Chen, Fang; Sager, James; Corbitt, Gail; Gardiner, Stanley C.

    2008-01-01

    Due to increasing industry demand for personnel who work effectively in virtual/distributed teams, MIS students should undergo training to improve their awareness of and competence in virtual teamwork. This paper proposes a model for virtual teamwork training and describes the implementation of the model in a class where students were located in…

  20. Incorporating biopulping technology into wood yard operations

    Treesearch

    Gary M. Scott; Eric. Horn; Masood. Akhtar; Ross E. Swaney; Michael J. Lentz; David F. Shipley

    1998-01-01

    Biopulping is the treatment of wood chips and other lignocellulosic materials with lignin-degrading fungi prior to pulping. Ten years of industry-sponsored research has demonstrated the technical feasibility of the technology for mechanical pulping at a laboratory scale. Two 50-ton outdoor chip pile trials recently conducted at the USDA Forest Service, Forest Products...

  1. Incorporating Virtual Teamwork Training into MIS Curricula

    ERIC Educational Resources Information Center

    Chen, Fang; Sager, James; Corbitt, Gail; Gardiner, Stanley C.

    2008-01-01

    Due to increasing industry demand for personnel who work effectively in virtual/distributed teams, MIS students should undergo training to improve their awareness of and competence in virtual teamwork. This paper proposes a model for virtual teamwork training and describes the implementation of the model in a class where students were located in…

  2. 49 CFR 572.180 - Incorporated materials.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ...,” incorporated by reference in §§ 572.180(a)(2), and 572.181(a); (4) Society of Automotive Engineers (SAE...”; and, (5) SAE J1733 of 1994-12 “Sign Convention for Vehicle Crash Testing.” (b) The Director of the... Woodfield Road, Gaithersburg, MD 20879, telephone (301) 670-0090. (2) The SAE materials referred to...

  3. Incorporation of an aldehyde function in oligonucleotides.

    PubMed

    Tilquin, J M; Dechamps, M; Sonveaux, E

    2001-01-01

    A nucleotide-like phosphoramidite building block that has the nucleic base replaced by the tert-butyldimethylsilyl-protected styrene glycol was synthesized. After the automatic synthesis of an oligonucleotide incorporating this synthon, the benzaldehyde function was generated by fluoride deprotection and oxidation by sodium periodate. In a similar manner, an oligonucleotide where a nucleic base was replaced by the (CH2)8CH=O chain was synthesized and conjugated with biotin derivatives.

  4. Opportunities in the industrial biobased products industry.

    PubMed

    Carole, Tracy M; Pellegrino, Joan; Paster, Mark D

    2004-01-01

    Approximately 89 million metric t of organic chemicals and lubricants, the majority of which are fossil based, are produced annually in the United States. The development of new industrial bioproducts, for production in stand-alone facilities or biorefineries, has the potential to reduce our dependence on imported oil and improve energy security. Advances in biotechnology are enabling the optimization of feedstock composition and agronomic characteristics and the development of new and improved fermentation organisms for conversion of biomass to new end products or intermediates. This article reviews recent biotechnology efforts to develop new industrial bioproducts and improve renewable feedstocks and key market opportunities.

  5. Non-standard amino acid incorporation into proteins using Escherichia coli cell-free protein synthesis

    PubMed Central

    Hong, Seok Hoon; Kwon, Yong-Chan; Jewett, Michael C.

    2014-01-01

    Incorporating non-standard amino acids (NSAAs) into proteins enables new chemical properties, new structures, and new functions. In recent years, improvements in cell-free protein synthesis (CFPS) systems have opened the way to accurate and efficient incorporation of NSAAs into proteins. The driving force behind this development has been three-fold. First, a technical renaissance has enabled high-yielding (>1 g/L) and long-lasting (>10 h in batch operation) CFPS in systems derived from Escherichia coli. Second, the efficiency of orthogonal translation systems (OTSs) has improved. Third, the open nature of the CFPS platform has brought about an unprecedented level of control and freedom of design. Here, we review recent developments in CFPS platforms designed to precisely incorporate NSAAs. In the coming years, we anticipate that CFPS systems will impact efforts to elucidate structure/function relationships of proteins and to make biomaterials and sequence-defined biopolymers for medical and industrial applications. PMID:24959531

  6. Incorporation of squalene into rod outer segments

    SciTech Connect

    Keller, R.K.; Fliesler, S.J. )

    1990-08-15

    We have reported previously that squalene is the major radiolabeled nonsaponifiable lipid product derived from ({sup 3}H)acetate in short term incubations of frog retinas. In the present study, we demonstrate that newly synthesized squalene is incorporated into rod outer segments under similar in vitro conditions. We show further that squalene is an endogenous constituent of frog rod outer segment membranes; its concentration is approximately 9.5 nmol/mumol of phospholipid or about 9% of the level of cholesterol. Pulse-chase experiments with radiolabeled precursors revealed no metabolism of outer segment squalene to sterols in up to 20 h of chase. Taken together with our previous absolute rate studies, these results suggest that most, if not all, of the squalene synthesized by the frog retina is transported to rod outer segments. Synthesis of protein is not required for squalene transport since puromycin had no effect on squalene incorporation into outer segments. Conversely, inhibition of isoprenoid synthesis with mevinolin had no effect on the incorporation of opsin into the outer segment. These latter results support the conclusion that the de novo synthesis and subsequent intracellular trafficking of opsin and isoprenoid lipids destined for the outer segment occur via independent mechanisms.

  7. Structural incorporation of As5+ into hematite.

    PubMed

    Bolanz, Ralph M; Wierzbicka-Wieczorek, Mária; Čaplovičová, Mária; Uhlík, Peter; Göttlicher, Jörg; Steininger, Ralph; Majzlan, Juraj

    2013-08-20

    Hematite (α-Fe2O3) is one of the most common iron oxides and a sink for the toxic metalloid arsenic. Arsenic can be immobilized by adsorption to the hematite surface; however, the incorporation of As in hematite was never seriously considered. In our study we present evidence that, besides adsorption, the incorporation of As into the hematite crystals can be of great relevance for As immobilization. With the coupling of nanoresolution techniques and X-ray absorption spectroscopy the presence of As (up to 1.9 wt %) within the hematite crystals could be demonstrated. The incorporated As(5+) displays a short-range order similar to angelellite-like clusters, epitaxially intergrown with hematite. Angelellite (Fe4As2O11), a triclinic iron arsenate with structural relations to hematite, can epitaxially intergrow along the (210) plane with the (0001) plane of hematite. This structural composite of hematite and angelellite-like clusters represents a new immobilization mechanism and potentially long-lasting storage facility for As(5+) by iron oxides.

  8. Benefits of oxygen incorporation in atomic laminates

    NASA Astrophysics Data System (ADS)

    Dahlqvist, Martin

    2016-04-01

    Atomic laminates such as MAX phases benefit from the addition of oxygen in many ways, from the formation of a protective oxide surface layer with self-healing capabilities when cracks form to the tuning of anisotropic conductivity. In this paper oxygen incorporation and vacancy formation in M 2AlC (M  =  Ti, V, Cr) MAX phases have been studied using first-principles calculations where the focus is on phase stability and electronic structure for different oxygen and/or vacancy configurations. Oxygen prefers different lattice sites depending on M-element and this can be correlated to the number of available non-bonding M d-electrons. In Ti2AlC, oxygen substitutes carbon while in Cr2AlC it is located interstitially within the Al-layer. I predict that oxygen incorporation in Ti2AlC stabilizes the material, which explains the experimentally observed 12.5 at% oxygen (x  =  0.5) in Ti2Al(C1-x O x ). In addition, it is also possible to use oxygen to stabilize the hypothetical Zr2AlC and Hf2AlC. Hence, oxygen incorporation may be beneficial in many ways. Not only can it make a material more stable, but it also can act as a reservoir for internal self-healing with shorter diffusion paths.

  9. Photoreduction and incorporation of iron into ferritins.

    PubMed Central

    Laulhère, J P; Labouré, A M; Briat, J F

    1990-01-01

    Pea seed ferritin is able to incorporate ferrous iron into the mineral core. Fe2+ may be formed by reduction of exogenous Fe3+ with ascorbate or by photoreduction by ferritin and by ferric citrate. In our experimental conditions the bulk of the photoreduction is carried out by ferritin, which is able to photoreduce its endogenous iron. Citrate does not enhance the photoreduction capacity of ferritin, and exogenous ferric citrate improves the yield of the reaction by about 30%. The mineral core of the ferritin is shown to photoreduce actively, and the protein shell does not participate directly in the photoreduction. Low light intensities and low concentration of reducing agents do not allow a release of iron from ferritins, but induce a 'redox mill' of photoreduction and simultaneous ferroxidase-mediated incorporation. High ascorbate concentrations induce the release of ferritin iron. These reactions are accompanied by the correlated occurrence of damage caused by radicals arising from Fenton reactions, leading to specific cleavages in the 28 kDa phytoferritin subunit. This damage caused by radicals occurs during the oxidative incorporation into the mineral core and is prevented by o-phenanthroline or by keeping the samples in the dark. Images Fig. 1. Fig. 2. Fig. 3. Fig. 5. PMID:2375759

  10. Industrial sand and gravel

    USGS Publications Warehouse

    Dolley, T.P.

    2006-01-01

    In 2005, domestic production of industrial sand and gravel was about 31 Mt, a 5% increase from 2004. This increase was bouyed by robust construction and petroleum sectors of the US economy. Based on estimated world production figures, the United States was the world's leading producer and consumer of industrial sand and gravel. In the short term, local shortages of industrial sand and gravel will continue to increase.

  11. 2002 Industry Studies: Shipbuilding

    DTIC Science & Technology

    2002-01-01

    Changwon-City, Kyungnam, Korea Automobile and Shipbuilding, Industry Division, Ministry of Commerce, Industry and Energy, Republic of Korea SAMSUNG ...time, to close its repair yards and outsource repair work to the private sector. Defense will reduce its costs by outsourcing and industry will have...closing public shipyards and outsourcing repair work to the private sector, and by allowing international competition for the construction of naval

  12. Biosynthesis of Silver Nanoparticles from Persimmon Byproducts and Incorporation in Biodegradable Sodium Alginate Thin Film.

    PubMed

    Ramachandraiah, Karna; Gnoc, Nguyen Trong Bao; Chin, Koo Bok

    2017-09-08

    Fruit industrial wastes such as persimmon seed, peel, and calyx were used to synthesize silver nanoparticles (AgNPs) and their antioxidant activities were compared with byproduct powders having different granularities. The AgNPs were incorporated in sodium alginate thin films and transparency and mechanical properties of the films was analyzed. Persimmon byproduct AgNPs were characterized by ultraviolet-visible spectroscopy, dynamic light scattering, X-ray diffraction, energy-dispersive x-ray spectroscopy, and scanning electron microscopy. The byproduct AgNPs displayed higher antioxidant activities than powders of different granularities (P < 0.05). Fabrication of alginate thin films incorporating byproduct AgNPs resulted in improved transparency (P < 0.05). The incorporation of persimmon byproduct AgNPs with excellent antioxidant activities into sodium alginate thin films did not diminish the mechanical properties of the thin films. Therefore, fruit industrial waste such as persimmon byproducts could be used to derive AgNPs and could be incorporated into biodegradable alginate thin films, with numerous applications including food packaging. © 2017 Institute of Food Technologists®.

  13. Heat pumps for industry

    NASA Astrophysics Data System (ADS)

    1991-09-01

    Research activities, both in the laboratory and in the field, confirm that heat pumps can improve energy efficiency and productivity for a multitude of process types. By using heat pumps, process industries can save significant amounts of energy and money and successfully control emissions. Those industries with special needs, such as recovering solvents, can meet them more energy efficiently and cost effectively with heat pumps. Through the years, the Office of Industrial Technologies (OIT) has helped industry solve its energy problems by joining in cooperative agreements with companies willing to do the research. The companies involved in these agreements share the costs of the research and benefit directly from the technology developed. OIT then has information from demonstration projects that it can pass on to others within industry. All the projects described in this brochure were joint ventures between DOE and industry participants. OIT will assist in accelerating the use of heat pumps in the industrial marketplace by continuing to work with industry on research and demonstration projects and to transfer research results and project performance information to the rest of industry. Successfully transferring this technology could conserve as much as 1.5 quads of energy annually at a savings of more than $4 billion at today's prices.

  14. Spring 2003 Industry Study. Space Industry

    DTIC Science & Technology

    2003-01-01

    The Herfindahl Hirshman Index (HHI) is the sum of the market shares squared for firms in a given industry, multiplied by 10,000: HHI = 100006. The... Herfindahl Hirshman Index for NAICS 336414 is approximately 1570. This number indicates more mergers are likely and will be unopposed by government

  15. Pharmacist-industry relationships.

    PubMed

    Saavedra, Keene; O'Connor, Bonnie; Fugh-Berman, Adriane

    2017-01-18

    The purpose of this study was to document, in their own words, beliefs and attitudes that American pharmacists have towards the pharmaceutical industry and pharmacists' interactions with industry. An ethnographic-style qualitative study was conducted utilizing open-ended interviews with four hospital pharmacists, two independent pharmacists, two retail pharmacists and one administrative pharmacist in the Washington, DC, metropolitan area to elicit descriptions of and attitudes towards pharmacists' relationships with industry. Analysis of the qualitative material followed established ethnographic conventions of narrative thematic analysis. All pharmacists reported interactions with pharmaceutical company representatives. Most had received free resources or services from industry, including educational courses. Respondents uniformly believed that industry promotional efforts are primarily directed towards physicians. Although respondents felt strongly that drug prices were excessive and that 'me-too' drugs were of limited use, they generally had a neutral-to-positive view of industry-funded adherence/compliance programmes, coupons, vouchers, and copay payment programmes. Interviewees viewed direct-to-consumer advertising negatively, but had a generally positive view of industry-funded drug information. Pharmacists may represent a hitherto under-identified cohort of health professionals who are targeted for industry influence; expanding roles for pharmacists may make them even more attractive targets for future industry attention. Pharmacy schools should ensure that students learn to rely on unbiased information sources and should teach students about conflicts of interest and the risks of interacting with industry. Further research should be conducted on the extent to which pharmacists' attitudes towards their duties and towards drug assessment and recommendation are influenced by the pharmaceutical industry. © 2017 Royal Pharmaceutical Society.

  16. 40 CFR 63.1502 - Incorporation by reference.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ....1502 Incorporation by reference. (a) The following material is incorporated by reference in the... the final rule in accordance with 5 U.S.C. 552(a) and 1 CFR part 51. This material is incorporated as.../016). (b) The material incorporated by reference is available for inspection at the National Archives...

  17. The methanol industry`s missed opportunities

    SciTech Connect

    Stokes, C.A.

    1995-12-31

    Throughout its history the methanol industry has been backward in research and development and in industry cooperation on public image and regulatory matters. It has been extremely reticent as to the virtue of its product for new uses, especially for motor fuel. While this is perhaps understandable looking back, it is inexcusable looking forward. The industry needs to cooperate on a worldwide basis in research and market development, on the one hand, and in image-building and political influence, on the other, staying, of course, within the US and European and other regional antitrust regulations. Unless the industry develops the motor fuel market, and especially the exciting new approach through fuel cell operated EVs, to siphon off incremental capacity and keep plants running at 90% or more of capacity, it will continue to live in a price roller-coaster climate. A few low-cost producers will do reasonably well and the rest will just get along or drop out here and there along the way, as in the past. Having come so far from such a humble beginning, it is a shame not to realize the full potential that is clearly there: a potential to nearly double sales dollars without new plants and to produce from a plentiful resource, at least for the next half-century, all the methanol that can be imagined to be needed. Beyond that the industry can turn to renewable energy--the sun--via biomass growth, to make their product. In so doing, it can perhaps apply methanol as a plant growth stimulant, in effect making the product fully self-sustainable. The world needs to know what methanol can do to provide--economically and reliably--the things upon which a better life rests.

  18. Wanted! Industrial Hygienists.

    ERIC Educational Resources Information Center

    Stilkind, Jerry

    1979-01-01

    Due to increased pressure (for example, from the Occupational Safety and Health Act) to create healthier/safer worker environments, the number of industrial hygienist positions has increased. Compares the need to the demand. Examines industrial hygienist salary ranges, expected educational background, job opportunities, and training program…

  19. Industrial Laser Marketplace

    NASA Astrophysics Data System (ADS)

    Belforte, David A.

    1992-05-01

    Many people in the semiconductor industry are upset because they claim we are not truly reporting their sales numbers. We have an ongoing problem of defining industrial lasers, so I though I would give you a definition so we are all on the same track. The second thing I want to explain is how we go about collecting the data.

  20. Industrial sand and gravel

    USGS Publications Warehouse

    Dolley, T.P.

    2011-01-01

    Domestic production of industrial sand and gravel in 2010 was about 26.5 Mt (29.2 million st), a 6-percent increased from 2009. Certain end uses of industrial sand and gravel, such as sand for container glass, golf course sand, recreational sand, specialty glass and water filtration, showed increased demand in 2010.

  1. Handbook of industrial robotics

    SciTech Connect

    Nof, S.Y.

    1985-01-01

    This book presents papers on the application of artificial intelligence to robots used in industrial plants. Topics considered include vision systems, elements of industrial robot software, robot teaching, the off-line programming of robots, a structured programming robot language, task-level manipulator programming, expert systems, and the role of the computer in robot intelligence.

  2. Innovations in Hospitality Industry

    ERIC Educational Resources Information Center

    Dzhandzhugazova, Elena A.; Blinova, Ekaterina A.; Orlova, Liubov N.; Romanova, Marianna M.

    2016-01-01

    The article focuses on the study of the role and importance of innovation, its classification, the problems of its application in the hotel industry with emphasis on the application of sensory marketing tools in the development of the innovative marketing mix within the hospitality industry. The article provides an analysis of the "seven…

  3. 2010 Training Industry Report

    ERIC Educational Resources Information Center

    Training, 2010

    2010-01-01

    Now in its 29th year, The Industry Report is recognized as the training industry's most trusted source of data on budgets, staffing, and programs. This year, the study was conducted by an outside research firm in June-August 2010, when members from the "Training" magazine database were e-mailed an invitation to participate in an online…

  4. Internationalizing Industrial Organization Courses.

    ERIC Educational Resources Information Center

    Chapman, Margaret

    1992-01-01

    Suggests ways of increasing the international focus of industrial organization courses. Discusses four areas of international topics that could be integrated into such courses. Includes imperfect markets, trade, and industrial policy; theory of the firm; exchange rates and market behavior; and issues in antitrust. Evaluates the extent and adequacy…

  5. Industrial Education Facilities.

    ERIC Educational Resources Information Center

    Michigan State Dept. of Public Instruction, Lansing.

    Factors for consideration by an industrial education planning committee are discussed. Selection, purchasing, and storage of new types of equipment and supplies, in addition to students' project storage, are noted as worthy of consideration in planning the shop facility. Planning factors for the various types of industrial arts laboratories are…

  6. Rebuilding America's Industrial Strength

    ERIC Educational Resources Information Center

    Community College Journal, 2011

    2011-01-01

    It's no secret within the academic or manufacturing communities that community colleges are the nation's training ground for industrial-skilled trade careers. But outside community college classrooms and industrial plants, many people are in the dark about the growing numbers of these often-well-paid and in-demand jobs. This article introduces the…

  7. INDUSTRIAL RADIOGRAPHY INSTRUCTOR'S GUIDE.

    ERIC Educational Resources Information Center

    Bureau of Adult, Vocational, and Technical Education (DHEW/OE), Washington, DC. Div. of Vocational and Technical Education.

    THIS LABORATORY GUIDE WAS DEVELOPED FOR AN 80-HOUR COURSE IN INDUSTRIAL RADIOGRAPHY FOR HIGH SCHOOL GRADUATES TRAINING TO BECOME BEGINNING RADIOGRAPHERS. IT IS USED IN CONJUNCTION WITH TWO OTHER VOLUMES--(1) INDUSTRIAL RADIOGRAPHY INSTRUCTOR'S GUIDE, AND (2) INUDSTRIAL RADIOGRAPHY MANUAL. THE PROGRAM WAS DEVELOPED BY A COMMITTEE OF REPRESENTATIVES…

  8. Aluminum Industry Technology Roadmap

    SciTech Connect

    none,

    2003-02-01

    This roadmap describes the industry's R&D strategy, priorities, milestones, and performance targets for achieving its long-term goals. It accounts for changes in the industry and the global marketplace since the first roadmap was published in 1997. An updated roadmap was published November 2001. (PDF 1.1 MB).

  9. Industrial Psychology in France

    ERIC Educational Resources Information Center

    de Montmollin, Maurice

    1977-01-01

    The current status of French industrial psychology is evaluated. Within the social and economic context of contemporary France, varying ideologies and scarce resources have created a gap between applied and academic industrial psychology. Personnel practices and systems and organizational research are noted. (Editor)

  10. Analysis of Industrial Wastewaters.

    ERIC Educational Resources Information Center

    Mancy, K. H.; Weber, W. J., Jr.

    A comprehensive, documented discussion of certain operating principles useful as guidelines for the analysis of industrial wastewaters is presented. Intended primarily for the chemist, engineer, or other professional person concerned with all aspects of industrial wastewater analysis, it is not to be considered as a substitute for standard manuals…

  11. Exploring the Industrial Subculture.

    ERIC Educational Resources Information Center

    Turner, Barry A.

    This book is an attempt to create a theoretical vocabulary for those who believe that the sociology of industrial organizations should concern itself with discovering the ways in which people in industry define their life-position and with examining the collective and organizational consequences of these views which they hold of themselves. Using…

  12. Foundry Industry Training Committee

    ERIC Educational Resources Information Center

    Industrial Training Journal, 1974

    1974-01-01

    The Foundry Industry Training Committee has encouraged the foundry industry in developing systematic manpower training and development programs at all levels. Features developed include competitions as a technique of standard setting, recommendations for technician training, and a widely used manpower information system. (MW)

  13. Collapse of an industry

    SciTech Connect

    Campbell, J.L.

    1988-01-01

    The author details the politics of nuclear energy in the U.S. and points out the advantages and disadvantages of various forms of industrial planning for this sector. He uses the nuclear industry as an example of how capitalism and democracy can be incompatible in some situations.

  14. Rebuilding America's Industrial Strength

    ERIC Educational Resources Information Center

    Community College Journal, 2011

    2011-01-01

    It's no secret within the academic or manufacturing communities that community colleges are the nation's training ground for industrial-skilled trade careers. But outside community college classrooms and industrial plants, many people are in the dark about the growing numbers of these often-well-paid and in-demand jobs. This article introduces the…

  15. INDUSTRIAL TRAINING RESEARCH REGISTER.

    ERIC Educational Resources Information Center

    Ministry of Labour, London (England).

    IN THIS CLASSIFIED REGISTER OF CURRENT AND RECENTLY COMPLETED STUDIES OF INDUSTRIAL TRAINING IN GREAT BRITAIN, INDIVIDUAL PROJECTS ARE ARRANGED BY THE ITEM NUMBER JUDGED MOST IMPORTANT, AND THE NUMBERS OF OTHER RELEVANT INDUSTRIAL RESEARCH PROJECTS ARE INSERTED AT THE END OF EACH SECTION TO PROVIDE CROSS REFERENCES. DESCRIPTIONS INCLUDE THE TITLE…

  16. Geothermal industry assessment

    SciTech Connect

    Not Available

    1980-07-01

    An assessment of the geothermal industry is presented, focusing on industry structure, corporate activities and strategies, and detailed analysis of the technological, economic, financial, and institutional issues important to government policy formulation. The study is based principally on confidential interviews with executives of 75 companies active in the field. (MHR)

  17. Analysis of Industrial Wastewaters.

    ERIC Educational Resources Information Center

    Mancy, K. H.; Weber, W. J., Jr.

    A comprehensive, documented discussion of certain operating principles useful as guidelines for the analysis of industrial wastewaters is presented. Intended primarily for the chemist, engineer, or other professional person concerned with all aspects of industrial wastewater analysis, it is not to be considered as a substitute for standard manuals…

  18. Mississippi forest industry

    Treesearch

    Dwane D. Van Hooser

    1968-01-01

    Nearly 402 million cubic feet of industrial roundwood were harvested in Mississippi in 1966. This was the largest harvest in a decade. Nearly three-fifths was softwood-mainly pine. Altogether, 305 million cubic feet were processed by the State's forest industries. Some 123 million cubic feet were shipped to surrounding States, while 26 million cubic feet were...

  19. Exploring the Industrial Subculture.

    ERIC Educational Resources Information Center

    Turner, Barry A.

    This book is an attempt to create a theoretical vocabulary for those who believe that the sociology of industrial organizations should concern itself with discovering the ways in which people in industry define their life-position and with examining the collective and organizational consequences of these views which they hold of themselves. Using…

  20. Commercial Banking Industry Survey.

    ERIC Educational Resources Information Center

    Bright Horizons Children's Centers, Cambridge, MA.

    Work and family programs are becoming increasingly important in the commercial banking industry. The objective of this survey was to collect information and prepare a commercial banking industry profile on work and family programs. Fifty-nine top American commercial banks from the Fortune 500 list were invited to participate. Twenty-two…

  1. The Industrial City

    ERIC Educational Resources Information Center

    Mohl, Raymond

    1976-01-01

    This article, the sixth installment in Environment's "Looking Back" series, traces the woes of America's industrialized cities to the movement that developed cities primarily as centers for industrial enterprise rather than as places for people to live. Today's social ills, from pollution to poverty, developed from that movement. (BT)

  2. Training in British Industry

    ERIC Educational Resources Information Center

    Jackson, Willis

    2008-01-01

    Purpose: The purpose of this paper is to examine the need for, and development of, further education and practical training for recruits into industry. Design/methodology/approach: The paper discusses how, at the time of writing, many firms were developing and operating training schemes for industrial personnel. Firms benefit themselves from…

  3. Industrial sand and gravel

    USGS Publications Warehouse

    Dolley, T.P.

    2012-01-01

    Domestic production of industrial sand and gravel in 2011 was about 30 Mt (33 million st), increasing slightly compared with 2010. Some important end uses for industrial sand and gravel include abrasives, filtration, foundry, glassmaking, hydraulic fracturing sand (frac sand) and silicon metal applications.

  4. Industrial sand and gravel

    USGS Publications Warehouse

    Dolley, T.P.

    2013-01-01

    Domestic production of industrial sand and gravel in 2012 was about 49.5 Mt (55 million st), increasing 13 percent compared with that of 2011. Some important end uses for industrial sand and gravel include abrasives, filtration, foundry, glassmaking, hydraulic fracturing sand (frac sand) and silicon metal applications.

  5. 2010 Training Industry Report

    ERIC Educational Resources Information Center

    Training, 2010

    2010-01-01

    Now in its 29th year, The Industry Report is recognized as the training industry's most trusted source of data on budgets, staffing, and programs. This year, the study was conducted by an outside research firm in June-August 2010, when members from the "Training" magazine database were e-mailed an invitation to participate in an online…

  6. Pennsylvania's Energy Curriculum for the Secondary Grades: Industrial Arts.

    ERIC Educational Resources Information Center

    Wighaman, Paul F.; Zimmerman, Earl R.

    Compiled in this guide are 23 previously published documents for use by secondary school industrial arts teachers who want to incorporate energy studies into their curricula. Over half of the entries describe energy-related projects such as fireplaces, solar water heaters, and solar ovens. Other materials presented address the place of energy in…

  7. Enterprise; Economic and Industrial Awareness and Primary Teacher Training.

    ERIC Educational Resources Information Center

    Baker, Roy

    1993-01-01

    Examines some of the questions faced by primary school teacher trainers in the design of programs of study for student teachers that provide a framework for economic and industrial understanding. Considers whether classroom teachers can incorporate this framework into the primary school curriculum. (MDM)

  8. Incorporating safety concerns into design and construction.

    PubMed

    Gardner, T W

    1990-08-01

    The nursing facility industry has provided a high level of fire safety according to statistics from the NFPA. To keep and improve this record, fire safety in the design and construction of nursing facilities must be a priority. Since the ground work of fire safety is laid in the design phase and finalized in the construction phase, such a priority will help lower initial and operating costs, improve the function of the facility, and provide a fire safe environment for residents and staff.

  9. 49 CFR 192.7 - What documents are incorporated by reference partly or wholly in this part?

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... incorporated document, citations of all affected sections are provided. Earlier editions of currently listed..., NW., Washington, DC 20005. C. American Society for Testing and Materials (ASTM), 100 Barr Harbor...-5990. E. Manufacturers Standardization Society of the Valve and Fittings Industry, Inc. (MSS), 127 Park...

  10. 49 CFR 192.7 - What documents are incorporated by reference partly or wholly in this part?

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... incorporated document, citations of all affected sections are provided. Earlier editions of currently listed..., NW., Washington, DC 20005. C. American Society for Testing and Materials (ASTM), 100 Barr Harbor...-5990. E. Manufacturers Standardization Society of the Valve and Fittings Industry, Inc. (MSS), 127 Park...

  11. 49 CFR 192.7 - What documents are incorporated by reference partly or wholly in this part?

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... incorporated document, citations of all affected sections are provided. Earlier editions of currently listed..., NW., Washington, DC 20005. C. American Society for Testing and Materials (ASTM), 100 Barr Harbor...-5990. E. Manufacturers Standardization Society of the Valve and Fittings Industry, Inc. (MSS), 127 Park...

  12. 49 CFR 192.7 - What documents are incorporated by reference partly or wholly in this part?

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... incorporated document, citations of all affected sections are provided. Earlier editions of currently listed..., NW., Washington, DC 20005. C. American Society for Testing and Materials (ASTM), 100 Barr Harbor...-5990. E. Manufacturers Standardization Society of the Valve and Fittings Industry, Inc. (MSS), 127 Park...

  13. 49 CFR 192.7 - What documents are incorporated by reference partly or wholly in this part?

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... incorporated document, citations of all affected sections are provided. Earlier editions of currently listed..., NW., Washington, DC 20005. C. American Society for Testing and Materials (ASTM), 100 Barr Harbor...-5990. E. Manufacturers Standardization Society of the Valve and Fittings Industry, Inc. (MSS), 127 Park...

  14. EVALUATION OF VOLATILE ORGANIC EMISSIONS DATA FOR NONPROCESS SOLVENT USE IN COMMERCIAL AND INDUSTRIAL BUSINESS CATEGORIES

    EPA Science Inventory

    The report gives results of a project to gather and evaluate existing data on nonprocess solvents; i.e., products not directly incorporated into specific industrial processes. This information is to be incorporated into an overall inventory project assessing consumer product use ...

  15. EVALUATION OF VOLATILE ORGANIC EMISSIONS DATA FOR NONPROCESS SOLVENT USE IN COMMERCIAL AND INDUSTRIAL BUSINESS CATEGORIES

    EPA Science Inventory

    The report gives results of a project to gather and evaluate existing data on nonprocess solvents; i.e., products not directly incorporated into specific industrial processes. This information is to be incorporated into an overall inventory project assessing consumer product use ...

  16. Industrial applications of nanoparticles.

    PubMed

    Stark, W J; Stoessel, P R; Wohlleben, W; Hafner, A

    2015-08-21

    Research efforts in the past two decades have resulted in thousands of potential application areas for nanoparticles - which materials have become industrially relevant? Where are sustainable applications of nanoparticles replacing traditional processing and materials? This tutorial review starts with a brief analysis on what makes nanoparticles attractive to chemical product design. The article highlights established industrial applications of nanoparticles and then moves to rapidly emerging applications in the chemical industry and discusses future research directions. Contributions from large companies, academia and high-tech start-ups are used to elucidate where academic nanoparticle research has revolutionized industry practice. A nanomaterial-focused analysis discusses new trends, such as particles with an identity, and the influence of modern instrument advances in the development of novel industrial products.

  17. Uranium industry annual 1996

    SciTech Connect

    1997-04-01

    The Uranium Industry Annual 1996 (UIA 1996) provides current statistical data on the US uranium industry`s activities relating to uranium raw materials and uranium marketing. The UIA 1996 is prepared for use by the Congress, Federal and State agencies, the uranium and nuclear electric utility industries, and the public. Data on uranium raw materials activities for 1987 through 1996 including exploration activities and expenditures, EIA-estimated reserves, mine production of uranium, production of uranium concentrate, and industry employment are presented in Chapter 1. Data on uranium marketing activities for 1994 through 2006, including purchases of uranium and enrichment services, enrichment feed deliveries, uranium fuel assemblies, filled and unfilled market requirements, uranium imports and exports, and uranium inventories are shown in Chapter 2. A feature article, The Role of Thorium in Nuclear Energy, is included. 24 figs., 56 tabs.

  18. Manganese incorporation into ferroelectric lead titanate

    NASA Astrophysics Data System (ADS)

    Stoupin, Stanislav

    Substitution with 3d magnetic transition elements in ABO 3 ferroelectric perovskite host media is widely utilized to produce relaxor ferroelectrics. Many resulting solid solutions exhibit magnetoelectric properties affected by concentration levels of the introduced magnetic ions. For conventional material preparation techniques such as firing of mechanically mixed oxides, incorporation is often limited by 5 mol% concentration level. Doping at higher concentrations requires introduction of other substituents to compensate charge within the unit cell to promote formation of the perovskite phase. In contrast, molecular mixing of precursor materials at the initial phase of preparation procedure offers an advantage of achieving higher incorporation levels of the 3d elements without additional charge-compensating ions. Presented in this thesis is a new sol-gel procedure utilized for high level incorporation of 3d magnetic ions into ferroelectric lead titanate. The technique was applied to produce PbTi1-xMnxO 3 solid solution, a perovskite system promising for high degree of magnetoelectric coupling. Concentration dependent studies were performed to characterize structural, thermal, ferroelectric and magnetic properties of the material. The solubility limit of Mn has been found to be 20 mol% and the material remains tetragonally distorted. X-ray Absorption Spectroscopy confirms that local structural environment of Mn, Ti, and Pb is consistent with tetragonal symmetry of the unit cell. Increase in Mn concentration leads to reduction in melting point, broadening of the ferroelectric transition, reduction of the transition temperature and increase in dielectric constant of the material. At the solubility limit the system was found to be ferromagnetic below 50 K.

  19. Framework for incorporating simulation into urology training.

    PubMed

    Arora, Sonal; Lamb, Benjamin; Undre, Shabnam; Kneebone, Roger; Darzi, Ara; Sevdalis, Nick

    2011-03-01

    • Changes to working hours, new technologies and increased accountability have rendered the need for alternative training environments for urologists. • Simulation offers a promising arena for learning to take place in a safe, realistic setting. • Despite its benefits, the incorporation of simulation into urological training programmes remains minimal. • The current status and future directions of simulation for training in technical and non-technical skills are reviewed as they pertain to urology. • A framework is presented for how simulation-based training could be incorporated into the entire urological curriculum. • The literature on simulation in technical and non-technical skills training is reviewed, with a specific focus upon urology. • To fully integrate simulation into a training curriculum, its possibilities for addressing all the competencies required by a urologist must be realized. • At an early stage of training, simulation has been used to develop basic technical skills and cognitive skills, such as decision-making and communication. • At an intermediate stage, the studies focus upon more advanced technical skills learnt with virtual reality simulators. • Non-technical skills training would include leadership and could be delivered with in situ models. • At the final stage, experienced trainees can practise technical and non-technical skills in full crisis simulations situated within a fully-simulated operating rooms. • Simulation can provide training in the technical and non-technical skills required to be a competent urologist. • The framework presented may guide how best to incorporate simulation into training curricula. • Future work should determine whether acquired skills transfer to clinical practice and improve patient care. © 2010 THE AUTHORS. BJU INTERNATIONAL © 2010 BJU INTERNATIONAL.

  20. Incorporating opponent models into adversary search

    SciTech Connect

    Carmel, D.; Markovitch, S.

    1996-12-31

    This work presents a generalized theoretical framework that allows incorporation of opponent models into adversary search. We present the M* algorithm, a generalization of minimax that uses an arbitrary opponent model to simulate the opponent`s search. The opponent model is a recursive structure consisting of the opponent`s evaluation function and its model of the player. We demonstrate experimentally the potential benefit of using an opponent model. Pruning in M* is impossible in the general case. We prove a sufficient condition for pruning and present the {alpha}{beta}* algorithm which returns the M* value of a tree while searching only necessary branches.

  1. Incorporation of Nanosensors into Aerospace Vehicles

    NASA Technical Reports Server (NTRS)

    Medelius, Pedro J.

    2007-01-01

    Traditional sensors are too big and heavy for installation in space vehicles, including the Space Shuttle Orbiter as well as future manned and unmanned vehicles currently in the early design phase. Advances in nanotechnology have led to the availability of smaller and more accurate sensors. Multiple and redundant nanosensors can be used to conduct more accurate and comprehensive measurements in a space vehicle. Early planning can lead to the relatively easy incorporation of miniature sensors sharing power and communication lines, thus reducing the requirement for large amount of electrical and/or optical cabling.

  2. Incorporating social concerns in environmental impact assessments

    SciTech Connect

    Wolfe, A.K.

    1990-03-01

    Social impact assessments most often focus on the population-driven impacts of projects. Such impacts may be insignificant when compared with social structural impacts of complex, controversial projects. This set of impacts includes social disruption, social group formation, and stigma effects. The National Environmental Policy Act does not explicitly call for assessment of, and assessors often are reluctant to address, these complex issues. This paper discusses why such impacts are critical to assess and gives examples of how they have been incorporated into environmental assessment documents. 6 refs.

  3. Radiation collimator and systems incorporating same

    DOEpatents

    Norman, Daren R [Idaho Falls, ID; Yoon, Woo Y [Idaho Falls, ID; Jones, James L [Idaho Falls, ID; Haskell, Kevin J [Idaho Falls, ID; Bennett, Brion D [Idaho Falls, ID; Tschaggeny, Charles W [Woods Cross, UT; Jones, Warren F [Idaho Falls, ID

    2011-09-13

    A collimator including a housing having disposed therein a shield element surrounding a converter core in which a photon beam is generated from electrons emanating from a linear accelerator. A beam channeler longitudinally adjacent the shield element has a beam aperture therethrough coaxially aligned with, and of the same diameter as, an exit bore of the converter core. A larger entry bore in the converter core is coaxial with, and longitudinally separated from, the exit bore thereof. Systems incorporating the collimator are also disclosed.

  4. Incorporating interfacial phenomena in solidification models

    NASA Technical Reports Server (NTRS)

    Beckermann, Christoph; Wang, Chao Yang

    1994-01-01

    A general methodology is available for the incorporation of microscopic interfacial phenomena in macroscopic solidification models that include diffusion and convection. The method is derived from a formal averaging procedure and a multiphase approach, and relies on the presence of interfacial integrals in the macroscopic transport equations. In a wider engineering context, these techniques are not new, but their application in the analysis and modeling of solidification processes has largely been overlooked. This article describes the techniques and demonstrates their utility in two examples in which microscopic interfacial phenomena are of great importance.

  5. Incorporating interfacial phenomena in solidification models

    NASA Technical Reports Server (NTRS)

    Beckermann, Christoph; Wang, Chao Yang

    1994-01-01

    A general methodology is available for the incorporation of microscopic interfacial phenomena in macroscopic solidification models that include diffusion and convection. The method is derived from a formal averaging procedure and a multiphase approach, and relies on the presence of interfacial integrals in the macroscopic transport equations. In a wider engineering context, these techniques are not new, but their application in the analysis and modeling of solidification processes has largely been overlooked. This article describes the techniques and demonstrates their utility in two examples in which microscopic interfacial phenomena are of great importance.

  6. Incorporation of noble metals into aerogels

    DOEpatents

    Hair, Lucy M.; Sanner, Robert D.; Coronado, Paul R.

    1998-01-01

    Aerogels or xerogels containing atomically dispersed noble metals for applications such environmental remediation. New noble metal precursors, such as Pt--Si or Pd(Si--P).sub.2, have been created to bridge the incompatibility between noble metals and oxygen, followed by their incorporation into the aerogel or xerogel through sol-gel chemistry and processing. Applications include oxidation of hydrocarbons and reduction of nitrogen oxide species, complete oxidation of volatile organic carbon species, oxidative membranes for photocatalysis and partial oxidation for synthetic applications.

  7. Incorporation of noble metals into aerogels

    DOEpatents

    Hair, L.M.; Sanner, R.D.; Coronado, P.R.

    1998-12-22

    Aerogels or xerogels containing atomically dispersed noble metals for applications such as environmental remediation are disclosed. New noble metal precursors, such as Pt--Si or Pd(Si--P){sub 2}, have been created to bridge the incompatibility between noble metals and oxygen, followed by their incorporation into the aerogel or xerogel through sol-gel chemistry and processing. Applications include oxidation of hydrocarbons and reduction of nitrogen oxide species, complete oxidation of volatile organic carbon species, oxidative membranes for photocatalysis and partial oxidation for synthetic applications.

  8. Parameters influencing zeolite incorporation in PDMS membranes

    SciTech Connect

    Vankelecom, I.F.J.; Scheppers, E.; Heus, R.; Uytterhoeven, J.B. )

    1994-11-24

    The incorporation of several types of zeolite in PDMS membranes is studied, by measuring the tensile strength, xylene sorption, and density of the membranes. The zeolite is shown to be involved in the cross-linking of the membrane. The interaction between the PDMS matrix and the zeolites results in reinforced membranes in the case of zeolite Y. The parameters influencing the dispersion of the zeolite in the membrane are investigated, as well as several aspects of the preparation method. Finally, the idea of cross-linking is applied to explain the results of water/ethanol pervaporation. 25 refs., 9 figs., 4 tabs.

  9. Valve system incorporating single failure protection logic

    DOEpatents

    Ryan, Rodger; Timmerman, Walter J. H.

    1980-01-01

    A valve system incorporating single failure protective logic. The system consists of a valve combination or composite valve which allows actuation or de-actuation of a device such as a hydraulic cylinder or other mechanism, integral with or separate from the valve assembly, by means of three independent input signals combined in a function commonly known as two-out-of-three logic. Using the input signals as independent and redundant actuation/de-actuation signals, a single signal failure, or failure of the corresponding valve or valve set, will neither prevent the desired action, nor cause the undesired action of the mechanism.

  10. Staphylococcus aureus Sortase A-Mediated Incorporation of Peptides: Effect of Peptide Modification on Incorporation

    PubMed Central

    Hansenová Maňásková, Silvie; Nazmi, Kamran; van ‘t Hof, Wim; van Belkum, Alex; Martin, Nathaniel I.; Bikker, Floris J.; van Wamel, Willem J. B.; Veerman, Enno C. I.

    2016-01-01

    The endogenous Staphylococcus aureus sortase A (SrtA) transpeptidase covalently anchors cell wall-anchored (CWA) proteins equipped with a specific recognition motif (LPXTG) into the peptidoglycan layer of the staphylococcal cell wall. Previous in situ experiments have shown that SrtA is also able to incorporate exogenous, fluorescently labelled, synthetic substrates equipped with the LPXTG motif (K(FITC)LPETG-amide) into the bacterial cell wall, albeit at high concentrations of 500 μM to 1 mM. In the present study, we have evaluated the effect of substrate modification on the incorporation efficiency. This revealed that (i) by elongation of LPETG-amide with a sequence of positively charged amino acids, derived from the C-terminal domain of physiological SrtA substrates, the incorporation efficiency was increased by 20-fold at 10 μM, 100 μM and 250 μM; (ii) Substituting aspartic acid (E) for methionine increased the incorporation of the resulting K(FITC)LPMTG-amide approximately three times at all concentrations tested; (iii) conjugation of the lipid II binding antibiotic vancomycin to K(FITC)LPMTG-amide resulted in the same incorporation levels as K(FITC)LPETG-amide, but much more efficient at an impressive 500-fold lower substrate concentration. These newly developed synthetic substrates can potentially find broad applications in for example the in situ imaging of bacteria; the incorporation of antibody recruiting moieties; the targeted delivery and covalent incorporation of antimicrobial compounds into the bacterial cell wall. PMID:26799839

  11. Uranium industry annual 1995

    SciTech Connect

    1996-05-01

    The Uranium Industry Annual 1995 (UIA 1995) provides current statistical data on the U.S. uranium industry`s activities relating to uranium raw materials and uranium marketing. The UIA 1995 is prepared for use by the Congress, Federal and State agencies, the uranium and nuclear electric utility industries, and the public. It contains data for the period 1986 through 2005 as collected on the Form EIA-858, ``Uranium Industry Annual Survey``. Data collected on the ``Uranium Industry Annual Survey`` provide a comprehensive statistical characterization of the industry`s plans and commitments for the near-term future. Where aggregate data are presented in the UIA 1995, care has been taken to protect the confidentiality of company-specific information while still conveying accurate and complete statistical data. Data on uranium raw materials activities for 1986 through 1995 including exploration activities and expenditures, EIA-estimated reserves, mine production of uranium, production of uranium concentrate, and industry employment are presented in Chapter 1. Data on uranium marketing activities for 1994 through 2005, including purchases of uranium and enrichment services, enrichment feed deliveries, uranium fuel assemblies, filled and unfilled market requirements, uranium imports and exports, and uranium inventories are shown in Chapter 2. The methodology used in the 1995 survey, including data edit and analysis, is described in Appendix A. The methodologies for estimation of resources and reserves are described in Appendix B. A list of respondents to the ``Uranium Industry Annual Survey`` is provided in Appendix C. For the reader`s convenience, metric versions of selected tables from Chapters 1 and 2 are presented in Appendix D along with the standard conversion factors used. A glossary of technical terms is at the end of the report. 14 figs., 56 tabs.

  12. Real World of Industrial Chemistry: Industrial Chemistry Bibliography.

    ERIC Educational Resources Information Center

    Marmor, Solomon

    1985-01-01

    Presented is a bibliography of articles published in the "Journal of Chemical Education" (1968-1983) which focused on industrial chemistry. Items are listed under these headings: real world of industrial chemistry; industrial notes; subject matter articles; industrial chemistry experiments/demonstrations; academic-industrial interface;…

  13. Reconstruction and Nation Building Industry. Industry Study, Spring 2009

    DTIC Science & Technology

    2009-01-01

    Spring 2009 Industry Study Final Report Reconstruction and Nation Building Industry The Industrial College of the Armed...4. TITLE AND SUBTITLE Spring 2009. Industry Study . Reconstruction and Nation Building Industry 5a. CONTRACT NUMBER 5b. GRANT NUMBER 5c. PROGRAM...Center for Defense and Strategic Studies , Canberra, Australia Australia Agency for International Development (AUSAID), Canberra, Australia Australia

  14. Spring 2006. Industry Study. Manufacturing Industry

    DTIC Science & Technology

    2006-01-01

    Vuong Co., Ltd, HCMC, Vietnam Mitsubishi Heavy Industries, Nagoya, Japan Nike Factory, Dong Nai, Vietnam NTK/NGK, Komaki City, Japan OPV...Corporation, Nagoya, Japan US Consul General, HCMC, Vietnam US Consulate, Nagoya, Japan US Embassy, Beijing, China UTC, P&W Chengdu Aerotech...Manufacturing, Chengdu, China Vina Kyoei Steel, Ltd, Phu My, Vietnam Yamazaki Mazak, Minokamo City, Japan Yara, Phu My, Vietnam 1 INTRODUCTION “A

  15. Environment Industry, Industry Study, Spring 2008

    DTIC Science & Technology

    2008-01-01

    Environmental Protection and Growth Management Department, Plantation , FL International Travel: U.S. Embassy and USAID, Cairo, Egypt Association...direction the industry takes in the future will be largely led by the U.S. and Western Europe . According to EBI, global environment market revenues...address these challenges. In addition to the U.S., Western Europe is and will continue to be a major contributor. Western Europe accounted for

  16. Spring 2008 Industry Study: Financial Services Industry

    DTIC Science & Technology

    2008-01-01

    Industrial College of the Armed Forces,National Defense University,Fort McNair ,Washington,DC,20319-5062 8. PERFORMING ORGANIZATION REPORT NUMBER 9 ...securitization, poor oversight by credit rating agencies and uninformed investors played a major role in spreading this crisis beyond the housing market and...position. The increased competition spurred by globalization in turn increased strategic, systemic and capital risks as firms and individual investors

  17. Baseline Industry Analysis, Advance Ceramics Industry

    DTIC Science & Technology

    1993-04-01

    Commerce , Department of Defense, and the National Critical Technologies Panel. Advanced Ceramics, which include ceramic matrix composites, are found in...ceramics and materials industry being identified as a National Critical Technology, Commerce Emerging Technology, and Defense Critical Technology.’ There is...total procurement cost in advanced systems, and as much as ten percent of the electronics portion of those weapons. Ceramic capacitors are almost as

  18. Energy Industry. Industry Study, Spring 2009

    DTIC Science & Technology

    2009-01-01

    result, electric cars and plug-in hybrids pose a challenge for utilities caught unprepared for a high concentration of electric vehicles within...car can be the equivalent of running up to six plasma television sets at once — a big energy drain… Electric cars and plug-in hybrids could pose a...Chris Woodyard, “California Utility Prepares for Surge in Plug-in Electric Cars ,” USA Today, (March 2009) http://www.usatoday.com/money/industries

  19. Shipbuilding Industry. Industry Study, Spring 2008

    DTIC Science & Technology

    2008-01-01

    Department of the Army LTC Edward Loewen, U.S. Army Mr. John Madden, Department of the Navy Lt Col Stacy McNutt, U.S. Air Force Mr. Steven Pawlow...Department of the Army Col Mark Tull, U.S. Marine Corps CDR George Vassilikas, U. S. Navy Ms. Tamara Verdon , National Geospatial Intelligence...December 7, 2001, 2001. 1. IBISWorld. IBISWorld Industry Report - Ship Building in the US2007. John Fisher. Looking Outside the Box - Confronting the

  20. Incorporating intelligence into structured radiology reports

    NASA Astrophysics Data System (ADS)

    Kahn, Charles E.

    2014-03-01

    The new standard for radiology reporting templates being developed through the Integrating the Healthcare Enterprise (IHE) and DICOM organizations defines the storage and exchange of reporting templates as Hypertext Markup Language version 5 (HTML5) documents. The use of HTML5 enables the incorporation of "dynamic HTML," in which documents can be altered in response to their content. HTML5 documents can employ JavaScript, the HTML Document Object Model (DOM), and external web services to create intelligent reporting templates. Several reporting templates were created to demonstrate the use of scripts to perform in-template calculations and decision support. For example, a template for adrenal CT was created to compute contrast washout percentage from input values of precontrast, dynamic postcontrast, and delayed adrenal nodule attenuation values; the washout value can used to classify an adrenal nodule as a benign cortical adenoma. Dynamic templates were developed to compute volumes and apply diagnostic criteria, such as those for determination of internal carotid artery stenosis. Although reporting systems need not use a web browser to render the templates or their contents, the use of JavaScript creates innumerable opportunities to construct highly sophisticated HTML5 reporting templates. This report demonstrates the ability to incorporate dynamic content to enhance the use of radiology reporting templates.

  1. Incorporating Geospatial Technology into Teacher Professional Development

    NASA Astrophysics Data System (ADS)

    Sproles, E. A.; Songer, L.

    2009-12-01

    The need for students to think spatially and use geospatial technologies is becoming more critical as these tools and concepts are increasingly incorporated into a broad range of occupations and academic disciplines. Geospatial Teaching Across the Curriculum (Geo-STAC) is a collaborative program that provides high school teachers with mentored professional development workshops in geospatial thought and technology. The seminars, led by community college faculty, give high school teachers the ability to incorporate geospatial technology into coursework across the curriculum — in Science, Technology, Engineering, and Math (STEM) and non-STEM disciplines. Students participating in the hands-on lessons gain experience in web-based and desktop Geographic Information Systems (GIS). The goals of the workshop are for teachers to: (1) understand the importance of geospatial thinking; (2) learn how to employ geospatial thinking in each discipline; (3) learn about geospatial technologies; (4) develop a Web-based GIS lesson; and, (5) implement a Web-based GIS lesson. Additionally, Geo-STAC works with high school students so that they: (1) understand the importance of geospatial technologies and careers in future job markets; (2) learn how to use Web-based GIS to solve problems; and, (3) visit the community college GIS lab and experience using desktop GIS. Geo-STAC actively disseminates this collaborative model to colleges to community colleges and high schools across the country.

  2. Self-Incorporation of Coenzymes by Ribozymes

    NASA Technical Reports Server (NTRS)

    Breaker, Ronald R.; Joyce, Gerald F.

    1995-01-01

    RNA molecules that are assembled from the four standard nucleotides contain a limited number of chemical functional groups, a characteristic that is generally thought to restrict the potential for catalysis by ribozymes. Although polypeptides carry a wider range of functional groups, many contemporary protein-based enzymes employ coenzymes to augment their capabilities. The coenzymes possess additional chemical moieties that can participate directly in catalysis and thereby enhance catalytic function. In this work, we demonstrate a mechanism by which ribozymes can supplement their limited repertoire of functional groups through RNAcatalyzed incorporation of various coenzymes and coenzyme analogues. The group I ribozyme of Tetrahymena thermophila normally mediates a phosphoester transfer reaction that results in the covalent attachment of guanosine to the ribozyme. Here, a shortened version of the ribozyme is shown to catalyze the self-incorporation of coenzymes and coenzyme analogues, such as NAD+ and dephosphorylated CoA-SH. Similar ribozyme activities may have played an important role in the "RNA world," when RNA enzymes are thought to have maintained a complex metabolism in the absence of proteins and would have benefited from the inclusion of additional functional groups.

  3. Optoelectronic devices incorporating fluoropolymer compositions for protection

    SciTech Connect

    Chen, Xuming; Chum, Pak-Wing S.; Howard, Kevin E.; Lopez, Leonardo C.; Sumner, William C.; Wu, Shaofu

    2015-12-22

    The fluoropolymer compositions of the present invention generally incorporate ingredients comprising one or more fluoropolymers, an ultraviolet light protection component (hereinafter UV protection component), and optionally one or more additional ingredients if desired. The UV protection component includes a combination of at least one hindered tertiary amine (HTA) compound having a certain structure and a weight average molecular weight of at least 1000. This tertiary amine is used in combination with at least one organic, UV light absorbing compound (UVLA compound) having a weight average molecular weight greater than 500. When the HTA compound and the UVLA compound are selected according to principles of the present invention, the UV protection component provides fluoropolymer compositions with significantly improved weatherability characteristics for protecting underlying materials, features, structures, components, and/or the like. In particular, fluoropolymer compositions incorporating the UV protection component of the present invention have unexpectedly improved ability to resist blackening, coloration, or other de gradation that may be caused by UV exposure. As a consequence, devices protected by these compositions would be expected to have dramatically improved service life. The compositions have a wide range of uses but are particularly useful for forming protective layers in optoelectronic devices.

  4. Incorporating Experience Curves in Appliance Standards Analysis

    SciTech Connect

    Garbesi, Karina; Chan, Peter; Greenblatt, Jeffery; Kantner, Colleen; Lekov, Alex; Meyers, Stephen; Rosenquist, Gregory; Buskirk, Robert Van; Yang, Hung-Chia; Desroches, Louis-Benoit

    2011-10-31

    The technical analyses in support of U.S. energy conservation standards for residential appliances and commercial equipment have typically assumed that manufacturing costs and retail prices remain constant during the projected 30-year analysis period. There is, however, considerable evidence that this assumption does not reflect real market prices. Costs and prices generally fall in relation to cumulative production, a phenomenon known as experience and modeled by a fairly robust empirical experience curve. Using price data from the Bureau of Labor Statistics, and shipment data obtained as part of the standards analysis process, we present U.S. experience curves for room air conditioners, clothes dryers, central air conditioners, furnaces, and refrigerators and freezers. These allow us to develop more representative appliance price projections than the assumption-based approach of constant prices. These experience curves were incorporated into recent energy conservation standards for these products. The impact on the national modeling can be significant, often increasing the net present value of potential standard levels in the analysis. In some cases a previously cost-negative potential standard level demonstrates a benefit when incorporating experience. These results imply that past energy conservation standards analyses may have undervalued the economic benefits of potential standard levels.

  5. Incorporated of tritiated water in fish

    SciTech Connect

    Sprous, D.G.; Fox, J.E.; Jackson, B.A.

    1989-01-01

    Tritiated water {sup 3}H{sub 2}O is routinely discharged into the environment near nuclear power plants and reactors. The radioactive water is rapidly equilibriated with cell water in the aquatic life forms. The purpose of this study was to determine the uptake of the radioactive hydrogen into the various lipid classes. Oak Ridge National Laboratory has been discharging tritiated water into White Oak Lake. Blue gill and mosquito fish from White Oak Lake were analyzed. An experimental fish tank with water having a specific activity of 1.2 {times} 10{sup 6} dpm of {sup 3}H/mL was set up. Mosquito fish were exposed to this level of radioactivity for thirty days. After this time the fish were lypolyzed an the lipids were extracted. The phospholipid fraction incorporated the greatest percentage of the radioactivity. Significant incorporation of activity was also seen in the triglyceride and cholesterol fractions. Phospholipids and cholesterol are important structural components of the cell, insuring persistence of the radioactivity in the organism. The long term effects are not known.

  6. Industries and cancer.

    PubMed

    Ward, E M; Burnett, C A; Ruder, A; Davis-King, K

    1997-05-01

    Epidemiologic evidence on the relationship between selected industries and cancer is reviewed. This article will focus on several industries which have not been covered elsewhere in this volume, briefly describe current research on cancer in the agricultural and construction industries, and discuss surveillance data on cancer mortality in relation to industry listed on US death certificates. Employment in the rubber industry has been associated with bladder cancer, leukemia, stomach, and lung cancer and is considered by the International Agency for Research on Cancer (IARC) to have 'sufficient evidence of carcinogenicity in humans.' Studies of workers exposed to polychlorinated biphenyls (PCBs) have reported excess mortality from gastrointestinal neoplasms, hematologic neoplasms, and skin cancer (specifically malignant melanoma); IARC considers that the evidence for carcinogenicity in humans is 'limited.' Employment in the boot and shoe industry has been associated with nasal adenocarcinomas in England and Italy ('sufficient'). Hairdressers and barbers have been found to have excess bladder cancer and less consistent evidence for several other sites ('limited'). Workers exposed to wood dust have excess mortality from cancer of the nasal sinuses and paranasal cavities; there is less consistent evidence for excess laryngeal cancer ('sufficient'). Workers employed in the petroleum industry have limited evidence for excess leukemia and other lymphatic and hematopoietic neoplasms, and skin cancer (particularly malignant melanoma) ('limited').

  7. Mask Industry Assessment: 2011

    NASA Astrophysics Data System (ADS)

    Chan, Y. David

    2011-11-01

    A survey supported by SEMATECH and administered by David Powell Consulting was sent to microelectronics industry leaders to gather information about the mask industry as an objective assessment of its overall condition. The survey was designed with the input of semiconductor company mask technologists and merchant mask suppliers. This year's assessment is the tenth in the current series of annual reports. With ongoing industry support, the report has been used as one of the baselines to gain perspective on the technical and business status of the mask and microelectronics industries. It continues to serve as a valuable reference to identify the strengths and opportunities of the mask industry. The results will be used to guide future investments pertaining to critical path issues. This year's survey was essentially the same as the 2005 through 2010 surveys. Questions are grouped into following categories: General Business Profile Information, Data Processing, Yields and Yield Loss Mechanisms, Delivery Times, Returns, and Services. Within each category are multiple questions that result in a detailed profile of both the business and technical status of the critical mask industry. This profile combined with the responses to past surveys represents a comprehensive view of changes in the industry.

  8. Mask Industry Assessment: 2010

    NASA Astrophysics Data System (ADS)

    Hughes, Greg; Chan, David Y.

    2010-09-01

    A survey created supported by SEMATECH and administered by David Powell Consulting was sent to microelectronics industry leaders to gather information about the mask industry as an objective assessment of its overall condition. The survey was designed with the input of semiconductor company mask technologists and merchant mask suppliers. This year's assessment is the ninth in the current series of annual reports. With ongoing industry support, the report can be used as a baseline to gain perspective on the technical and business status of the mask and microelectronics industries. It will continue to serve as a valuable reference to identify the strengths and opportunities of the mask industry. The results will be used to guide future investments pertaining to critical path issues. This year's survey was basically the same as the 2005 through 2009 surveys. Questions are grouped into categories: General Business Profile Information, Data Processing, Yields and Yield Loss Mechanisms, Delivery Times, Returns, and Services. Within each category are multiple questions that result in a detailed profile of both the business and technical status of the critical mask industry. This profile combined with the responses to past surveys represents a comprehensive view of changes in the industry.

  9. How industries change.

    PubMed

    McGahan, Anita M

    2004-10-01

    It's fairly obvious: To make intelligent investments within your organization, you need to understand how your whole industry is changing. But such knowledge is not always easy to come by. Companies misread clues and arrive at false conclusions all the time. To truly understand where your industry is headed, you have to take a long-term, high-level look at the context in which you do business, says Boston University professor Anita McGahan. She studied a variety of businesses from a cross section of industries over a ten-year period, examining how industry structure affects business profitability and investor returns. Her research suggests that industries evolve along one of four distinct trajectories--radical, progressive, creative, and intermediating--that set boundaries on what will generate profits in a business. These four trajectories are defined by two types of threats. The first is when new, outside alternatives threaten to weaken or make obsolete core activities that have historically generated profits for an industry. The second is when an industry's core assets--its resources, knowledge, and brand capital--fail to generate value as they once did. Industries undergo radical change when core assets and core activities are both threatened with obsolescence; they experience progressive change when neither are jeopardized. Creative change occurs when core assets are under threat but core activities are stable, and intermediating change happens when core activities are threatened while core assets retain their capacity to create value. If your company's innovation strategy is not aligned with your industry's change trajectory, your plan for achieving returns on invested capital cannot succeed, McGahan says. But if you understand which path you're on, you can determine which strategies will succeed and which will backfire.

  10. Novel sintered ceramic materials incorporated with EAF carbon steel slag

    NASA Astrophysics Data System (ADS)

    Karayannis, V.; Ntampegliotis, K.; Lamprakopoulos, S.; Papapolymerou, G.; Spiliotis, X.

    2017-01-01

    In the present research, novel sintered clay-based ceramic materials containing electric arc furnace carbon steel slag (EAFC) as a useful admixture were developed and characterized. The environmentally safe management of steel industry waste by-products and their valorization as secondary resources into value-added materials towards circular economy have attracted much attention in the last years. EAF Carbon steel slag in particular, is generated during the manufacture of carbon steel. It is a solid residue mainly composed of rich-in- Fe, Ca and Si compounds. The experimental results show that the beneficial incorporation of lower percentages of EAFC up to 6%wt. into ceramics sintered at 950 °C is attained without significant variations in sintering behavior and physico-mechanical properties. Further heating up to 1100 °C strongly enhances the densification of the ceramic microstructures, thus reducing the porosity and strengthening their mechanical performance. On the other side, in terms of thermal insulation behavior as well as energy consumption savings and production cost alleviation, the optimum sintering temperature appears to be 950 °C.

  11. Industrial application of semantic process mining

    NASA Astrophysics Data System (ADS)

    Espen Ingvaldsen, Jon; Atle Gulla, Jon

    2012-05-01

    Process mining relates to the extraction of non-trivial and useful information from information system event logs. It is a new research discipline that has evolved significantly since the early work on idealistic process logs. Over the last years, process mining prototypes have incorporated elements from semantics and data mining and targeted visualisation techniques that are more user-friendly to business experts and process owners. In this article, we present a framework for evaluating different aspects of enterprise process flows and address practical challenges of state-of-the-art industrial process mining. We also explore the inherent strengths of the technology for more efficient process optimisation.

  12. Lung cancer of radiochemical industry workers

    SciTech Connect

    Khokhryakov, V.F.; Romanov, S.A.

    1993-12-31

    The frequency of lung cancers among 2346 radiochemical industry workers exposed to combined external {beta}-{gamma} and internal incorporated plutonium irradiation has been investigated. The results of observation were analyzed assuming the linear relative risk model taking into account prolongation of exposure. On the basis of the obtained data it was shown that life span incidence, of radiation-induced lung cancer is several times greater than 8.5 x 10{sup -3}Sv{sup -1}, which is recommended by ICRP Publication 60 to estimate the carcinogenic risk of organ exposure.

  13. Industrial application experiment series

    NASA Technical Reports Server (NTRS)

    Bluhm, S. A.

    1980-01-01

    The deployment of parabolic dish systems into the industrial sector for the purpose of providing users, suppliers, sponsors, and developers with a realistic assessment of system feasibility in selected near-term industrial applications will be accomplished initially through the industrial module experiment and later through additional experiments involving thermal, electric, and combined thermal and electrical systems. The approach is to progress through steps, from single module to multi-module systems, from thermal-only applications to more complex combined thermal and electric applications. The experience of other solar thermal experiments, particularly those involving parabolic dish hardware, will be utilized to the fullest extent possible in experiment planning and implementation.

  14. Industrial Energy Technology

    SciTech Connect

    Traylor, T.D.; Pitsenbarger, J.

    1995-10-01

    Industrial Energy Technology (IET) is published bimonthly. Each issue of IET presents an article of interest to these in the field; contains abstracts of the most current world literature pertaining to industrial energy efficiency; and announces upcoming meetings, conferences, and symposia in the field of industrial energy conservation. This publication contains the abstracts of Department of Energy (DOE) reports, journal articles, conference papers, patents, theses, and monographs added to the Energy Science and Technology Database during the past two months. Also included are US information obtained through acquisition programs or interagency agreements and international information obtained through the International Energy Agency`s Energy Technology Data Exchange or government-to-government agreements.

  15. Industrial Process Surveillance System

    DOEpatents

    Gross, Kenneth C.; Wegerich, Stephan W; Singer, Ralph M.; Mott, Jack E.

    2001-01-30

    A system and method for monitoring an industrial process and/or industrial data source. The system includes generating time varying data from industrial data sources, processing the data to obtain time correlation of the data, determining the range of data, determining learned states of normal operation and using these states to generate expected values, comparing the expected values to current actual values to identify a current state of the process closest to a learned, normal state; generating a set of modeled data, and processing the modeled data to identify a data pattern and generating an alarm upon detecting a deviation from normalcy.

  16. Industrial process surveillance system

    DOEpatents

    Gross, Kenneth C.; Wegerich, Stephan W.; Singer, Ralph M.; Mott, Jack E.

    1998-01-01

    A system and method for monitoring an industrial process and/or industrial data source. The system includes generating time varying data from industrial data sources, processing the data to obtain time correlation of the data, determining the range of data, determining learned states of normal operation and using these states to generate expected values, comparing the expected values to current actual values to identify a current state of the process closest to a learned, normal state; generating a set of modeled data, and processing the modeled data to identify a data pattern and generating an alarm upon detecting a deviation from normalcy.

  17. Industrial process surveillance system

    DOEpatents

    Gross, K.C.; Wegerich, S.W.; Singer, R.M.; Mott, J.E.

    1998-06-09

    A system and method are disclosed for monitoring an industrial process and/or industrial data source. The system includes generating time varying data from industrial data sources, processing the data to obtain time correlation of the data, determining the range of data, determining learned states of normal operation and using these states to generate expected values, comparing the expected values to current actual values to identify a current state of the process closest to a learned, normal state; generating a set of modeled data, and processing the modeled data to identify a data pattern and generating an alarm upon detecting a deviation from normalcy. 96 figs.

  18. Automation of industrial bioprocesses.

    PubMed

    Beyeler, W; DaPra, E; Schneider, K

    2000-01-01

    The dramatic development of new electronic devices within the last 25 years has had a substantial influence on the control and automation of industrial bioprocesses. Within this short period of time the method of controlling industrial bioprocesses has changed completely. In this paper, the authors will use a practical approach focusing on the industrial applications of automation systems. From the early attempts to use computers for the automation of biotechnological processes up to the modern process automation systems some milestones are highlighted. Special attention is given to the influence of Standards and Guidelines on the development of automation systems.

  19. Enhancing the Undergraduate Industrial Engineering Curriculum: Defining Desired Characteristics and Emerging Topics

    ERIC Educational Resources Information Center

    Eskandari, Hamidreza; Sala-Diakanda, Serge; Furterer, Sandra; Rabelo, Luis; Crumpton-Young, Lesia; Williams, Kent

    2007-01-01

    Purpose: This paper aims to present the results of an initial research study conducted to identify the desired professional characteristics of an industrial engineer with an undergraduate degree and the emerging topic areas that should be incorporated into the curriculum to prepare industrial engineering (IE) graduates for the future workforce.…

  20. Enhancing the Undergraduate Industrial Engineering Curriculum: Defining Desired Characteristics and Emerging Topics

    ERIC Educational Resources Information Center

    Eskandari, Hamidreza; Sala-Diakanda, Serge; Furterer, Sandra; Rabelo, Luis; Crumpton-Young, Lesia; Williams, Kent

    2007-01-01

    Purpose: This paper aims to present the results of an initial research study conducted to identify the desired professional characteristics of an industrial engineer with an undergraduate degree and the emerging topic areas that should be incorporated into the curriculum to prepare industrial engineering (IE) graduates for the future workforce.…

  1. Acoustic barriers obtained from industrial wastes.

    PubMed

    Garcia-Valles, M; Avila, G; Martinez, S; Terradas, R; Nogués, J M

    2008-07-01

    Acoustic pollution is an environmental problem that is becoming increasingly more important in our society. Likewise, the accumulation of generated waste and the need for waste management are also becoming more and more pressing. In this study we describe a new material--called PROUSO--obtained from industrial wastes. PROUSO has a variety of commercial and engineering, as well as building, applications. The main raw materials used for this environmentally friendly material come from slag from the aluminium recycling process, dust from the marble industry, foundry sands, and recycled expanded polystyrene from recycled packaging. Some natural materials, such as plastic clays, are also used. To obtain PROUSO we used a conventional ceramic process, forming new mineral phases and incorporating polluted elements into the structure. Its physical properties make PROUSO an excellent acoustic and thermal insulation material. It absorbs 95% of the sound in the frequency band of the 500 Hz. Its compressive strength makes it ideal for use in ceramic wall building.

  2. INCORPORATING DYNAMIC 3D SIMULATION INTO PRA

    SciTech Connect

    Steven R Prescott; Curtis Smith

    2011-07-01

    Through continued advancement in computational resources, development that was previously done by trial and error production is now performed through computer simulation. These virtual physical representations have the potential to provide accurate and valid modeling results and are being used in many different technical fields. Risk assessment now has the opportunity to use 3D simulation to improve analysis results and insights, especially for external event analysis. By using simulations, the modeler only has to determine the likelihood of an event without having to also predict the results of that event. The 3D simulation automatically determines not only the outcome of the event, but when those failures occur. How can we effectively incorporate 3D simulation into traditional PRA? Most PRA plant modeling is made up of components with different failure modes, probabilities, and rates. Typically, these components are grouped into various systems and then are modeled together (in different combinations) as a “system” with logic structures to form fault trees. Applicable fault trees are combined through scenarios, typically represented by event tree models. Though this method gives us failure results for a given model, it has limitations when it comes to time-based dependencies or dependencies that are coupled to physical processes which may themselves be space- or time-dependent. Since, failures from a 3D simulation are naturally time related, they should be used in that manner. In our simulation approach, traditional static models are converted into an equivalent state diagram representation with start states, probabilistic driven movements between states and terminal states. As the state model is run repeatedly, it converges to the same results as the PRA model in cases where time-related factors are not important. In cases where timing considerations are important (e.g., when events are dependent upon each other), then the simulation approach will typically

  3. Tobacco industry tactics for resisting public policy on health.

    PubMed

    Saloojee, Y; Dagli, E

    2000-01-01

    The tactics used by the tobacco industry to resist government regulation of its products include conducting public relations campaigns, buying scientific and other expertise to create controversy about established facts, funding political parties, hiring lobbyists to influence policy, using front groups and allied industries to oppose tobacco control measures, pre-empting strong legislation by pressing for the adoption of voluntary codes or weaker laws, and corrupting public officials. Formerly secret internal tobacco industry documents provide evidence of a 50-year conspiracy to "resist smoking restrictions, restore smoker confidence and preserve product liability defence". The documents reveal industry-wide collusion on legal, political and socially important issues to the tobacco industry and clearly demonstrate that the industry is not disposed to act ethically or responsibly. Societal action is therefore required to ensure that the public health takes precedence over corporate profits. Recommendations for reducing the political influence of the tobacco industry include the following. Every tobacco company in every market should publicly disclose what it knew about the addictiveness and harm caused by tobacco, when it obtained this information, and what it did about it. The industry should be required to guarantee internationally recognized basic consumer rights to its customers. Trade associations and other industry groupings established to deceive the public should be disbanded. These recommendations should be incorporated into WHO's Framework Convention on Tobacco Control.

  4. Tobacco industry tactics for resisting public policy on health.

    PubMed Central

    Saloojee, Y.; Dagli, E.

    2000-01-01

    The tactics used by the tobacco industry to resist government regulation of its products include conducting public relations campaigns, buying scientific and other expertise to create controversy about established facts, funding political parties, hiring lobbyists to influence policy, using front groups and allied industries to oppose tobacco control measures, pre-empting strong legislation by pressing for the adoption of voluntary codes or weaker laws, and corrupting public officials. Formerly secret internal tobacco industry documents provide evidence of a 50-year conspiracy to "resist smoking restrictions, restore smoker confidence and preserve product liability defence". The documents reveal industry-wide collusion on legal, political and socially important issues to the tobacco industry and clearly demonstrate that the industry is not disposed to act ethically or responsibly. Societal action is therefore required to ensure that the public health takes precedence over corporate profits. Recommendations for reducing the political influence of the tobacco industry include the following. Every tobacco company in every market should publicly disclose what it knew about the addictiveness and harm caused by tobacco, when it obtained this information, and what it did about it. The industry should be required to guarantee internationally recognized basic consumer rights to its customers. Trade associations and other industry groupings established to deceive the public should be disbanded. These recommendations should be incorporated into WHO's Framework Convention on Tobacco Control. PMID:10994263

  5. Industry Report 1996.

    ERIC Educational Resources Information Center

    Training, 1996

    1996-01-01

    The industry report of employer-provided training includes charts depicting training budgets, who's learning what and how, trends (including work teams and social issues), and technologies for training. (SK)

  6. Industrial Arts Student Organizations.

    ERIC Educational Resources Information Center

    Dixon, James D.

    1980-01-01

    A national survey attempted to identify (1) the number and size of student organizations in industrial arts, (2) the perceptions that principals and guidance personnel had of the student organizations, and (3) the activities offered to student organization members. (LRA)

  7. The Educational Film Industry

    ERIC Educational Resources Information Center

    Tortora, Vincent R.; Schillaci, Peter

    1975-01-01

    Increased dialog is needed among educational film producers, distributors, and consumers in order to be sure that what is being produced meets educators' needs and also to help solve the financial problems of the film industry. (LS)

  8. Uranium Industry Annual, 1992

    SciTech Connect

    Not Available

    1993-10-28

    The Uranium Industry Annual provides current statistical data on the US uranium industry for the Congress, Federal and State agencies, the uranium and electric utility industries, and the public. The feature article, ``Decommissioning of US Conventional Uranium Production Centers,`` is included. Data on uranium raw materials activities including exploration activities and expenditures, resources and reserves, mine production of uranium, production of uranium concentrate, and industry employment are presented in Chapter 1. Data on uranium marketing activities including domestic uranium purchases, commitments by utilities, procurement arrangements, uranium imports under purchase contracts and exports, deliveries to enrichment suppliers, inventories, secondary market activities, utility market requirements, and uranium for sale by domestic suppliers are presented in Chapter 2.

  9. Industrial Assessment Center

    SciTech Connect

    J. Kelly Kissock; Becky Blust

    2007-04-17

    The University of Dayton (UD) performed energy assessments, trained students and supported USDOE objectives. In particular, the UD Industrial Assessment Center (IAC) performed 96 industrial energy assessment days for mid-sized manufacturers. The average identified and implemented savings on each assessment were $261,080 per year and $54,790 per year. The assessments served as direct training in industrial energy efficiency for 16 UD IAC students. The assessments also served as a mechanism for the UD IAC to understand manufacturing energy use and improve upon the science of manufacturing energy efficiency. Specific research results were published in 16 conference proceedings and journals, disseminated in 22 additional invited lectures, and shared with the industrial energy community through the UD IAC website.

  10. The Educational Film Industry

    ERIC Educational Resources Information Center

    Tortora, Vincent R.; Schillaci, Peter

    1975-01-01

    Increased dialog is needed among educational film producers, distributors, and consumers in order to be sure that what is being produced meets educators' needs and also to help solve the financial problems of the film industry. (LS)

  11. GHGRP Industrial Profiles

    EPA Pesticide Factsheets

    EPA's Greenhouse Gas Reporting Program periodically produces detailed profiles of the various industries that report under the program. These profiles contain detailed analyses. This page hosts data highlights for all sectors.

  12. Computers Transform an Industry.

    ERIC Educational Resources Information Center

    Simich, Jack

    1982-01-01

    Describes the use of computer technology in the graphics communication industry. Areas that are examined include typesetting, color scanners, communications satellites, page make-up systems, and the business office. (CT)

  13. An Industrial Project

    ERIC Educational Resources Information Center

    Daniels, D. J.; And Others

    1975-01-01

    Describes the commercial uses, industrial production and laboratory production of 2-methylpentane-2,4-diol. Suggests extensions for the experiment in the areas of boiling point/composition curves and alkaline depolymerization. (GS)

  14. An Industrial Project

    ERIC Educational Resources Information Center

    Daniels, D. J.; And Others

    1975-01-01

    Describes the commercial uses, industrial production and laboratory production of 2-methylpentane-2,4-diol. Suggests extensions for the experiment in the areas of boiling point/composition curves and alkaline depolymerization. (GS)

  15. EPA's Industry Assistance Office.

    ERIC Educational Resources Information Center

    Ruggiero, Michael A.

    1979-01-01

    The EPA's Industry Assistance Office, established under the Toxic Substance Control Act to help manufacturers and processors of chemical substances and mixtures to comply with the Act, is described. (BB)

  16. Computers Transform an Industry.

    ERIC Educational Resources Information Center

    Simich, Jack

    1982-01-01

    Describes the use of computer technology in the graphics communication industry. Areas that are examined include typesetting, color scanners, communications satellites, page make-up systems, and the business office. (CT)

  17. Women and Industrial Education

    ERIC Educational Resources Information Center

    Bjorkquist, David C.

    1973-01-01

    Deals with these three questions: (1) What is the employment status of women, (2) What do advocates of the women's rights movement want, (3) How should industrial educators respond to the women's rights movement? (SB)

  18. Arms Industry limited

    SciTech Connect

    Wulf, H.

    1993-12-31

    The intent of this study is to give an overview of the present state of the world arms industry. It is an empirical account of the size of the industry and particularly its present problems. The authors examine the economic pressures that affect the international arms trade. Specifically, it raises the question of how dependent the industry is on weapons production and exports, and whether there are any alternatives. Export dependence of the major weapons producing countries is a major focus. The book focus`s on private industry as opposed to examination of national governments. Despite the passing of the Cold War and some brief post-Gulf War euphoria about the possibility of greater restrain on the part of weapons exporters, the conventional arms trade is alive and well, albeit with new variations.

  19. Incorporating Pharmacy Scholarship to Management Responsibilities

    PubMed Central

    Hertig, John B.; Weber, Robert J.

    2015-01-01

    Practice advancement demands innovation. Amidst professional change, pharmacy leaders have the opportunity to collaborate with colleagues to develop transformational ideas, implement these solutions, and share those successes with professionals around the state, country, and world. Scholarship, defined as contributing to the literature through publications, presentations, and other writings, is an ideal way to advance innovation within the profession. It is critical for pharmacy leaders to build scholarship into their professional workflow. Ensuring that successful projects are published or presented may translate into shared best practices. Many pharmacy leaders may find it difficult to participate in scholarship activities because of their busy schedules. This column serves to outline recommendations on how to effectively incorporate writing for publications, making presentations, and other scholarly work into the role of pharmacy leaders and managers. To reduce the barriers to scholarship, pharmacy leaders role can apply project management principles to their work and identify projects that otherwise would not be published and support their development. PMID:26823623

  20. Jay Carter Enterprises, Incorporated steam engine

    NASA Technical Reports Server (NTRS)

    1981-01-01

    The Small Community Solar Thermal Power Experiment (SCSE) selected an organic rankine cycle (ORC) engine driving a high speed permanent magnet alternator (PMA) as the baseline power conversion subsystem (PCS) design. The back-up conceptual PCS design is a steam engine driving an induction alternator delivering power directly to the grid. The development of the automotive reciprocating simple rankine cycle steam engine and how an engine of similar design might be incorporated into the SCSE is discussed. A description of the third generation automotive engine is included along with some preliminary test data. Tests were conducted with the third generation engine driving an induction alternator delivering power directly to the grid. The purpose of these tests is to further verify the effects of expander inlet temperature, input thermal power level, expansion ratio, and other parameters affecting engine performance to aid in the development of an SCSE PCS.

  1. Incorporating LCA tools in integrated simulation environments

    SciTech Connect

    Pal, Vineeta; Papamichael, Konstantinos; Bourassa, Norman; Loffeld, John J.

    2001-02-01

    In this paper we address the issue of building data schema evolution in integrated simulation environments, as seen from the perspective of incorporating LCA tools within these environments. First we describe the key features of an integrated simulation environment designed for expandability, focusing on (a) the mechanism for the expansion of the integrated environment, and (b) its overall system architecture that allows processes and data to be added to the system without modifications or restructuring of existing code. We then focus on how the data schema allows the inclusion and maintenance of specialized construction objects bearing LCA data. Finally, we discuss various integration issues that arise from modeling capabilities and idiosyncrasies of individual simulation and analysis tools.

  2. Upgrading carbon dioxide by incorporation into heterocycles.

    PubMed

    Yu, Bing; He, Liang-Nian

    2015-01-01

    Carbon dioxide is commonly regarded as the primary greenhouse gas, but from a synthetic standpoint can be utilized as an alternative and sustainable C1 synthon in organic synthesis rather than a waste. This results in the production of organic carbonates, carboxylic acids, and derivatives. Recently, CO2 has emerged as an appealing tool for heterocycle synthesis under mild conditions without using stoichiometric amounts of organometallic reducing reagents. This Minireview summarizes recent advances on methodologies for CO2 incorporation into N-, O-, and C-nucleophiles to provide various heterocycles, including cyclic carbamates, benzoxazine-2-one, 4-hydroxyquinolin-2-one, quinazoline-2,4(1 H,3 H)-diones, benzimidazolones, α-alkylidene cyclic carbonate.

  3. Incorporating global components into ethics education.

    PubMed

    Wang, George; Thompson, Russell G

    2013-03-01

    Ethics is central to science and engineering. Young engineers need to be grounded in how corporate social responsibility principles can be applied to engineering organizations to better serve the broader community. This is crucial in times of climate change and ecological challenges where the vulnerable can be impacted by engineering activities. Taking a global perspective in ethics education will help ensure that scientists and engineers can make a more substantial contribution to development throughout the world. This paper presents the importance of incorporating the global and cross culture components in the ethic education. The authors bring up a question to educators on ethics education in science and engineering in the globalized world, and its importance, necessity, and impendency. The paper presents several methods for discussion that can be used to identify the differences in ethics standards and practices in different countries; enhance the student's knowledge of ethics in a global arena.

  4. Active containment systems incorporating modified pillared clays

    SciTech Connect

    Lundie, P. |; McLeod, N.

    1997-12-31

    The application of treatment technologies in active containment systems provides a more advanced and effective method for the remediation of contaminated sites. These treatment technologies can be applied in permeable reactive walls and/or funnel and gate systems. The application of modified pillared clays in active containment systems provides a mechanism for producing permeable reactive walls with versatile properties. These pillared clays are suitably modified to incorporate reactive intercalatants capable of reacting with both a broad range of organic pollutants of varying molecular size, polarity and reactivity. Heavy metals can be removed from contaminated water by conventional ion-exchange and other reactive processes within the clay structure. Complex contamination problems can be addressed by the application of more than one modified clay on a site specific basis. This paper briefly describes the active containment system and the structure/chemistry of the modified pillared clay technology, illustrating potential applications of the in-situ treatment process for contaminated site remediation.

  5. Processing ribonucleotides incorporated during eukaryotic DNA replication

    PubMed Central

    Williams, Jessica S.; Lujan, Scott A.; Kunkel, Thomas A.

    2017-01-01

    Preface The information encoded in DNA is influenced by the presence of non-canonical nucleotides, the most frequent of which are ribonucleotides. In this review we discuss recent discoveries about ribonucleotide incorporation into DNA during replication by the three major eukaryotic replicases, DNA polymerases α, δ and ε. The presence of ribonucleotides in DNA causes short deletion mutations and may result in the generation of DNA single- and double-strand breaks, leading to genomic instability. We describe how these ribonucleotides are removed from DNA by ribonucleotide excision repair and by topoisomerase 1. We discuss the biological consequences and the physiological roles of ribonucleotides in DNA, and consider how deficiencies in their removal from DNA may be important in the etiology of disease. PMID:27093943

  6. Incorporating immigrant flows into microsimulation models.

    PubMed

    Duleep, Harriet Orcutt; Dowhan, Daniel J

    2008-01-01

    Building on the research on immigrant earnings reviewed in the first article of this series, "Research on Immigrant Earnings," the preceding article, "Adding Immigrants to Microsimulation Models," linked research results to various issues essential for incorporating immigrant earnings into microsimulation models. The discussions of that article were in terms of a closed system. That is, it examined a system in which immigrant earnings and emigration are forecast for a given population represented in the base sample in the microsimulation model. This article, the last in the series, addresses immigrant earnings projections for open systems--microsimulation models that include projections of future immigration. The article suggests a simple method to project future immigrants and their earnings. Including the future flow of immigrants in microsimulation models can dramatically affect the projected Social Security benefits of some groups.

  7. [Effectiveness of incorporating a quality management system].

    PubMed

    Seki, Akira; Hankins, Raleigh W; Miya, Tetsumasa

    2010-01-01

    In 2003, the ISO 15189 international standardization program on the quality and competence of the clinical reference laboratory was introduced. To date, 46 facilities have committed themselves to providing a higher level of medical service by incorporating a quality management system (QMS) and acquiring accreditation. QMS is defined as "setting up a policy and goals pertaining to quality, and adopting an appropriate system," and is a scheme that includes all managerial and technical factors that can affect test results. Regarding the Health Sciences Research Institute Group, 4 facilities have previously received the accreditation described above, but in the process of implementing the QMS, a number of problems have been identified. Here, we report on the effectiveness of adopting such a QMS based on the results of employee questionnaires, internal audits, customer complaint analyses, and external audits by the Japan Accreditation Board for Conformity Assessment (JAB), the official inspection body for accreditation.

  8. Radiation shielding materials and containers incorporating same

    DOEpatents

    Mirsky, Steven M.; Krill, Stephen J.; Murray, Alexander P.

    2005-11-01

    An improved radiation shielding material and storage systems for radioactive materials incorporating the same. The PYRolytic Uranium Compound ("PYRUC") shielding material is preferably formed by heat and/or pressure treatment of a precursor material comprising microspheres of a uranium compound, such as uranium dioxide or uranium carbide, and a suitable binder. The PYRUC shielding material provides improved radiation shielding, thermal characteristic, cost and ease of use in comparison with other shielding materials. The shielding material can be used to form containment systems, container vessels, shielding structures, and containment storage areas, all of which can be used to house radioactive waste. The preferred shielding system is in the form of a container for storage, transportation, and disposal of radioactive waste. In addition, improved methods for preparing uranium dioxide and uranium carbide microspheres for use in the radiation shielding materials are also provided.

  9. Radiation Shielding Materials and Containers Incorporating Same

    DOEpatents

    Mirsky, Steven M.; Krill, Stephen J.; and Murray, Alexander P.

    2005-11-01

    An improved radiation shielding material and storage systems for radioactive materials incorporating the same. The PYRolytic Uranium Compound (''PYRUC'') shielding material is preferably formed by heat and/or pressure treatment of a precursor material comprising microspheres of a uranium compound, such as uranium dioxide or uranium carbide, and a suitable binder. The PYRUC shielding material provides improved radiation shielding, thermal characteristic, cost and ease of use in comparison with other shielding materials. The shielding material can be used to form containment systems, container vessels, shielding structures, and containment storage areas, all of which can be used to house radioactive waste. The preferred shielding system is in the form of a container for storage, transportation, and disposal of radioactive waste. In addition, improved methods for preparing uranium dioxide and uranium carbide microspheres for use in the radiation shielding materials are also provided.

  10. Solar cells incorporating light harvesting arrays

    DOEpatents

    Lindsey, Jonathan S.; Meyer, Gerald J.

    2003-07-22

    A solar cell incorporates a light harvesting array that comprises: (a) a first substrate comprising a first electrode; and (b) a layer of light harvesting rods electrically coupled to the first electrode, each of the light harvesting rods comprising a polymer of Formula I: ##EQU1## wherein m is at least 1, and may be from two, three or four to 20 or more; X.sup.1 is a charge separation group (and preferably a porphyrinic macrocycle, which may be one ligand of a double-decker sandwich compound) having an excited-state of energy equal to or lower than that of X.sup.2 ; and X.sup.2 through X.sup.m+1 are chromophores (and again are preferably porphyrinic macrocycles).

  11. Incorporating linear viscoelasticity into acoustic scattering theory

    NASA Astrophysics Data System (ADS)

    Hipp, Alexander K.; Adjadj, Laurent P.; Storti, Giuseppe; Morbidelli, Massimo

    2002-04-01

    The scattering theory of Epstein and Carhart [J. Acoust. Soc. Am. 25, 553-565 (1953)] and Allegra and Hawley [J. Acoust. Soc. Am. 51, 1545-1564 (1972)] is a well-established approach for the prediction of the acoustic attenuation and sound speed in suspensions and emulsions. The original theory assumes that each phase is either an elastic solid or a Newtonian liquid; incorporation of other rheological behavior generally requires rederivation of the model equations. An exception is the case of linear viscoelasticity: using a suitable stress-strain relation, the original model equations also hold for this case. In this work, it is shown that G*=G'-iG'', where G' and G'' are the storage and loss moduli of a viscoelastic material, is analogous to the shear modulus G (elastic solids) and -iωɛ (Newtonian liquids). Viscoelasticity can thus be introduced simply by using G* in place of G.

  12. Solar cells incorporating light harvesting arrays

    DOEpatents

    Lindsey, Jonathan S.; Meyer, Gerald J.

    2002-01-01

    A solar cell incorporates a light harvesting array that comprises: (a) a first substrate comprising a first electrode; and (b) a layer of light harvesting rods electrically coupled to the first electrode, each of the light harvesting rods comprising a polymer of Formula I: X.sup.1.paren open-st.X.sup.m+1).sub.m (I) wherein m is at least 1, and may be from two, three or four to 20 or more; X.sup.1 is a charge separation group (and preferably a porphyrinic macrocycle, which may be one ligand of a double-decker sandwich compound) having an excited-state of energy equal to or lower than that of X.sup.2 ; and X.sup.2 through X.sup.m+1 are chromophores (and again are preferably porphyrinic macrocycles).

  13. Improving Density Estimation by Incorporating Spatial Information

    NASA Astrophysics Data System (ADS)

    Smith, Laura M.; Keegan, Matthew S.; Wittman, Todd; Mohler, George O.; Bertozzi, Andrea L.

    2010-12-01

    Given discrete event data, we wish to produce a probability density that can model the relative probability of events occurring in a spatial region. Common methods of density estimation, such as Kernel Density Estimation, do not incorporate geographical information. Using these methods could result in nonnegligible portions of the support of the density in unrealistic geographic locations. For example, crime density estimation models that do not take geographic information into account may predict events in unlikely places such as oceans, mountains, and so forth. We propose a set of Maximum Penalized Likelihood Estimation methods based on Total Variation and [InlineEquation not available: see fulltext.] Sobolev norm regularizers in conjunction with a priori high resolution spatial data to obtain more geographically accurate density estimates. We apply this method to a residential burglary data set of the San Fernando Valley using geographic features obtained from satellite images of the region and housing density information.

  14. Jay Carter Enterprises, Incorporated steam engine

    NASA Astrophysics Data System (ADS)

    1981-05-01

    The Small Community Solar Thermal Power Experiment (SCSE) selected an organic rankine cycle (ORC) engine driving a high speed permanent magnet alternator (PMA) as the baseline power conversion subsystem (PCS) design. The back-up conceptual PCS design is a steam engine driving an induction alternator delivering power directly to the grid. The development of the automotive reciprocating simple rankine cycle steam engine and how an engine of similar design might be incorporated into the SCSE is discussed. A description of the third generation automotive engine is included along with some preliminary test data. Tests were conducted with the third generation engine driving an induction alternator delivering power directly to the grid. The purpose of these tests is to further verify the effects of expander inlet temperature, input thermal power level, expansion ratio, and other parameters affecting engine performance to aid in the development of an SCSE PCS.

  15. Industrial Fuel Flexibility Workshop

    SciTech Connect

    none,

    2006-09-01

    On September 28, 2006, in Washington, DC, ITP and Booz Allen Hamilton conducted a fuel flexibility workshop with attendance from various stakeholder groups. Workshop participants included representatives from the petrochemical, refining, food and beverage, steel and metals, pulp and paper, cement and glass manufacturing industries; as well as representatives from industrial boiler manufacturers, technology providers, energy and waste service providers, the federal government and national laboratories, and developers and financiers.

  16. Mask industry assessment: 2003

    NASA Astrophysics Data System (ADS)

    Kimmel, Kurt R.

    2003-12-01

    Microelectronics industry leaders routinely name mask technology and mask supply issues of cost and cycle time as top issues of concern. A survey was initiated in 2002 with support from International SEMATECH (ISMT) and administered by SEMI North America to gather information about the mask industry as an objective assessment of its overall condition.1 This paper presents the results of the second annual survey which is an enhanced version of the inaugural survey building upon its strengths and improving the weak points. The original survey was designed with the input of member company mask technologists, merchant mask suppliers, and industry equipment makers. The assessment is intended to be used as a baseline for the mask industry and the microelectronics industry to gain a perspective on the technical and business status of the critical mask industry. An objective is to create a valuable reference to identify strengths and opportunities and to guide investments on critical-path issues. As subsequent years are added, historical profiles can also be created. This assessment includes inputs from ten major global merchant and captive mask manufacturers representing approximately 80% of the global mask market (using revenue as the measure) and making this the most comprehensive mask industry survey ever. The participating companies are: Compugraphics, Dai Nippon Printing, Dupont Photomask, Hoya, IBM, Infineon, Intel, Taiwan Mask Company, Toppan, and TSMC. Questions are grouped into five categories: General Business Profile Information; Data Processing; Yields and Yield loss Mechanisms; Delivery Time; and Returns and Services. Within each category are a multitude of questions that create a detailed profile of both the business and technical status of the mask industry.

  17. Transformation of industrial territories

    NASA Astrophysics Data System (ADS)

    Plotnikova, N. I.; Kolocova, I. I.

    2017-08-01

    The problem of removing industrial enterprises from the historical center of the city and the subsequent effective use of the territories has been relevant for Western countries. Nowadays, the problem is crucial for Russia, its megacities and regional centers. The paper analyzes successful projects of transforming industrial facilities into cultural, business and residential objects in the world and in Russia. The patterns of the project development have been determined and presented in the paper.

  18. Industrial waste pollution

    NASA Technical Reports Server (NTRS)

    Jensen, L. D.

    1972-01-01

    The characteristics and effects of industrial waste pollution in the Chesapeake Bay are discussed. The sources of inorganic and organic pollution entering the bay are described. The four types of pollutants are defined as: (1) inorganic chemical wastes, (2) naturally occurring organic wastes, (3) synthetic organic wastes (exotics) and (4) thermal effluents. The ecological behavior of industrial wastes in the surface waters is analyzed with respect to surface film phenomena, interfacial phenomena, and benthis phenomena

  19. Ethics and Industrial Production

    NASA Astrophysics Data System (ADS)

    Bernard, Daniel

    The development of nanotechnology seems inevitable, for it alone would be able to solve or circumvent the huge difficulties to be faced by industrial and post-industrial societies, in both their private and their public aspects, and including the ageing population and its expectations with regard to health, the evolution of the climate, pollution, the management of food resources and raw materials, access to drinking water, control of energy production and consumption, equitable and sustainable development, etc.

  20. Industry Studies Handbook

    DTIC Science & Technology

    2007-01-01

    of industries. He found that highly concentrated industries tend to be more profitable—usually measured by rate of return on invested capital...additional details. • Rental Cars and Insurance: The government contracted rental car rate includes insurance as long as the company subscribes to...you don’t end up with Happy Joe’s $1-a- Day. The government -contracted rate may very well be higher than that quoted by the rental car company, on

  1. Space Technology Industry Forum

    NASA Image and Video Library

    2010-07-12

    NASA Chief Technologist Bobby Braun speaks during the NASA New Space Technology Industry Forum being held at the University of Maryland in College Park on Tuesday, July 13, 2010. During the two-day event, speakers are focusing on the president's fiscal year 2011 budget request for NASA's new Space Technology Program. Representatives from industry, academia and the federal government are in attendance to discuss strategy, development and implementation of NASA's proposed new technology-enabled exploration. Photo Credit: (NASA/Bill Ingalls)

  2. Academia Meets Industry.

    PubMed

    Schäfer, Christian; Paprotka, Tobias; Heitzer, Ellen; Eccleston, Mark; Noe, Johannes; Holdenrieder, Stefan; Diehl, Frank; Thierry, Alain

    2016-01-01

    Researchers working in industrial laboratories as well as in academic laboratories discussed topics related to the use of extracellular nucleic acids in different fields. These included areas like non-invasive prenatal diagnosis, the application of different methods for the analysis and characterization of patients with benign and malignant diseases and technical aspects associated with extracellular nucleic acids. In addition, the possibilities and chances for a cooperation of researchers working in different worlds, i.e. academia and industry, were discussed.

  3. Industry Related Financial Incentives.

    DTIC Science & Technology

    1987-09-29

    toxic chemicals. Campbell hazards were more specific to concerns of the food processing industry -- preventing food contamination. Celanese, citing...Maintenance of production Control of Toxic chemicals HCESCHT Hiazarcs -pecific to tre chemical industry. CE LANE SE 3-2 Exhibit 3-2 IDENTIFICATION OF...of the event and that no one was harmed. Additionally, Johnson and Johnson called upon Campbell’s expertise during the more recent Tylenol recall

  4. Industrial robots: Handbook

    NASA Astrophysics Data System (ADS)

    Kozyrev, Iu. G.

    Topics covered include terms, definitions, and classification; operator-directed manipulators; autooperators as used in automated pressure casting; construction and application of industrial robots; and the operating bases of automated systems. Attention is given to adaptive and interactive robots; gripping mechanisms; applications to foundary production, press-forging plants, heat treatment, welding, and assembly operations. A review of design recommendations includes a determination of fundamental structural and technological indicators for industrial robots and a consideration of drive mechanisms.

  5. Education Industry, Spring 2008

    DTIC Science & Technology

    2008-01-01

    Russia is a riddle wrapped in a mystery inside an enigma ” might apply to American education. The more we (ICAF’s 2008 Education Industry Study...explored the subject, the more complexities, paradoxes and enigmas we encountered. Not the least of the difficulties may have been our attempt to fit a...be “a riddle wrapped in a mystery inside an enigma ,” consider yourself … educated. An Industry? – Businesslike but not a business One

  6. Characterization techniques for incorporating backgrounds into DIRSIG

    NASA Astrophysics Data System (ADS)

    Brown, Scott D.; Schott, John R.

    2000-07-01

    The appearance of operation hyperspectral imaging spectrometers in both solar and thermal regions has lead to the development of a variety of spectral detection algorithms. The development and testing of these algorithms requires well characterized field collection campaigns that can be time and cost prohibitive. Radiometrically robust synthetic image generation (SIG) environments that can generate appropriate images under a variety of atmospheric conditions and with a variety of sensors offers an excellent supplement to reduce the scope of the expensive field collections. In addition, SIG image products provide the algorithm developer with per-pixel truth, allowing for improved characterization of the algorithm performance. To meet the needs of the algorithm development community, the image modeling community needs to supply synthetic image products that contain all the spatial and spectral variability present in real world scenes, and that provide the large area coverage typically acquired with actual sensors. This places a heavy burden on synthetic scene builders to construct well characterized scenes that span large areas. Several SIG models have demonstrated the ability to accurately model targets (vehicles, buildings, etc.) Using well constructed target geometry (from CAD packages) and robust thermal and radiometry models. However, background objects (vegetation, infrastructure, etc.) dominate the percentage of real world scene pixels and utilizing target building techniques is time and resource prohibitive. This paper discusses new methods that have been integrated into the Digital Imaging and Remote Sensing Image Generation (DIRSIG) model to characterize backgrounds. The new suite of scene construct types allows the user to incorporate both terrain and surface properties to obtain wide area coverage. The terrain can be incorporated using a triangular irregular network (TIN) derived from elevation data or digital elevation model (DEM) data from actual

  7. Incorporation of RAM techniques into simulation modeling

    NASA Astrophysics Data System (ADS)

    Nelson, S. C., Jr.; Haire, M. J.; Schryver, J. C.

    1995-01-01

    This work concludes that reliability, availability, and maintainability (RAM) analytical techniques can be incorporated into computer network simulation modeling to yield an important new analytical tool. This paper describes the incorporation of failure and repair information into network simulation to build a stochastic computer model to represent the RAM Performance of two vehicles being developed for the US Army: The Advanced Field Artillery System (AFAS) and the Future Armored Resupply Vehicle (FARV). The AFAS is the US Army's next generation self-propelled cannon artillery system. The FARV is a resupply vehicle for the AFAS. Both vehicles utilize automation technologies to improve the operational performance of the vehicles and reduce manpower. The network simulation model used in this work is task based. The model programmed in this application requirements a typical battle mission and the failures and repairs that occur during that battle. Each task that the FARV performs--upload, travel to the AFAS, refuel, perform tactical/survivability moves, return to logistic resupply, etc.--is modeled. Such a model reproduces a model reproduces operational phenomena (e.g., failures and repairs) that are likely to occur in actual performance. Simulation tasks are modeled as discrete chronological steps; after the completion of each task decisions are programmed that determine the next path to be followed. The result is a complex logic diagram or network. The network simulation model is developed within a hierarchy of vehicle systems, subsystems, and equipment and includes failure management subnetworks. RAM information and other performance measures are collected which have impact on design requirements. Design changes are evaluated through 'what if' questions, sensitivity studies, and battle scenario changes.

  8. Incorporation of RAM techniques into simulation modeling

    SciTech Connect

    Nelson, S.C. Jr.; Haire, M.J.; Schryver, J.C.

    1995-07-01

    This work concludes that reliability, availability, and maintainability (RAM) analytical techniques can be incorporated into computer network simulation modeling to yield an important new analytical tool. This paper describes the incorporation of failure and repair information into network simulation to build a stochastic computer model represents the RAM Performance of two vehicles being developed for the US Army: The Advanced Field Artillery System (AFAS) and the Future Armored Resupply Vehicle (FARV). The AFAS is the US Army`s next generation self-propelled cannon artillery system. The FARV is a resupply vehicle for the AFAS. Both vehicles utilize automation technologies to improve the operational performance of the vehicles and reduce manpower. The network simulation model used in this work is task based. The model programmed in this application requirements a typical battle mission and the failures and repairs that occur during that battle. Each task that the FARV performs--upload, travel to the AFAS, refuel, perform tactical/survivability moves, return to logistic resupply, etc.--is modeled. Such a model reproduces a model reproduces operational phenomena (e.g., failures and repairs) that are likely to occur in actual performance. Simulation tasks are modeled as discrete chronological steps; after the completion of each task decisions are programmed that determine the next path to be followed. The result is a complex logic diagram or network. The network simulation model is developed within a hierarchy of vehicle systems, subsystems, and equipment and includes failure management subnetworks. RAM information and other performance measures are collected which have impact on design requirements. Design changes are evaluated through ``what if`` questions, sensitivity studies, and battle scenario changes.

  9. Renewable energy recovery through selected industrial wastes

    NASA Astrophysics Data System (ADS)

    Zhang, Pengchong

    Typically, industrial waste treatment costs a large amount of capital, and creates environmental concerns as well. A sound alternative for treating these industrial wastes is anaerobic digestion. This technique reduces environmental pollution, and recovers renewable energy from the organic fraction of those selected industrial wastes, mostly in the form of biogas (methane). By applying anaerobic technique, selected industrial wastes could be converted from cash negative materials into economic energy feed stocks. In this study, three kinds of industrial wastes (paper mill wastes, brown grease, and corn-ethanol thin stillage) were selected, their performance in the anaerobic digestion system was studied and their applicability was investigated as well. A pilot-scale system, including anaerobic section (homogenization, pre-digestion, and anaerobic digestion) and aerobic section (activated sludge) was applied to the selected waste streams. The investigation of selected waste streams was in a gradually progressive order. For paper mill effluents, since those effluents contain a large amount of recalcitrant or toxic compounds, the anaerobic-aerobic system was used to check its treatability, including organic removal efficiency, substrate utilization rate, and methane yield. The results showed the selected effluents were anaerobically treatable. For brown grease, as it is already well known as a treatable substrate, a high rate anaerobic digester were applied to check the economic effect of this substrate, including methane yield and substrate utilization rate. These data from pilot-scale experiment have the potential to be applied to full-scale plant. For thin stillage, anaerobic digestion system has been incorporated to the traditional ethanol making process as a gate-to-gate process. The performance of anaerobic digester was applied to the gate-to-gate life-cycle analysis to estimate the energy saving and industrial cost saving in a typical ethanol plant.

  10. Industrial Lead in the Global Environment

    NASA Astrophysics Data System (ADS)

    Flegal, A. R.; Ericson, J. E.

    2004-12-01

    Although the rates of emission, fluxes and recycling of natural and industrial lead in biogeochemical systems are needed to quantify environmental lead pollution, those geochemical processes are rarely incorporated in either Earth Science or Environmental Health Science curriculum. The need for an understanding of the global lead cycle in those diverse fields is due to the omnipresence of industrial lead contamination that was initiated over five millennia ago, which has often exceeded natural emissions of lead by orders of magnitude. That contamination has been repeatedly demonstrated in environmental analyses ranging from the most remote polar regions and oceans of the Earth to urban and industrial regions. The latter include studies of soil lead in Baltimore, New Orleans, St. Paul-Minneapolis, Los Angeles, Tijuana, and Ottawa, which show that lead from past combustion of leaded gasoline remains in those cities and it is bioavailable. With the protracted residence time of that soil lead (102 - 103 years), it is estimated that generations of urban children will continue to be exposed to this toxicant, unless there is abatement. Moreover, many third world countries are still using leaded gasoline and other sources of industrial lead continue to be emitted into the environment, albeit at reduced levels. Consequently, the geochemical cycling of lead is and will continue to be a most appropriate and topical subject of study in the curriculum of earth science and environmental health science.

  11. Industrial graphene metrology.

    PubMed

    Kyle, Jennifer Reiber; Ozkan, Cengiz S; Ozkan, Mihrimah

    2012-07-07

    Graphene is an allotrope of carbon whose structure is based on one-atom-thick planar sheets of carbon atoms that are densely packed in a honeycomb crystal lattice. Its unique electrical and optical properties raised worldwide interest towards the design and fabrication of future electronic and optical devices with unmatched performance. At the moment, extensive efforts are underway to evaluate the reliability and performance of a number of such devices. With the recent advances in synthesizing large-area graphene sheets, engineers have begun investigating viable methodologies for conducting graphene metrology and quality control at industrial scales to understand a variety of reliability issues including defects, patternability, electrical, and physical properties. This review summarizes the current state of industrial graphene metrology and provides an overview of graphene metrology techniques. In addition, a recently developed large-area graphene metrology technique based on fluorescence quenching is introduced. For each metrology technique, the industrial metrics it measures are identified--layer thickness, edge structure, defects, Fermi level, and thermal conductivity--and a detailed description is provided as to how the measurements are performed. Additionally, the potential advantages of each technique for industrial use are identified, including throughput, scalability, sensitivity to substrate/environment, and on their demonstrated ability to achieve quantified results. The recently developed fluorescence-quenching metrology technique is shown to meet all the necessary criteria for industrial applications, rendering it the first industry-ready graphene metrology technique.

  12. Neurosurgery and industry.

    PubMed

    Robertson, Jon H

    2008-12-01

    The primary purpose of the relationship between neurosurgery and industry must be to improve patient care and advance medical knowledge. This relationship is desirable and can be mutually beneficial. Strict adherence to established ethical and legal guidelines is necessary to avoid financial conflicts of interest that may occur between neurosurgery and industry. The Code of Ethics established by the American Association of Neurological Surgeons (AANS) in 1986 emphasizes the physician's responsibility to always act in the best interest of his or her patients. The AANS Guidelines for Corporate Relations were developed in 2004 to address the concern of the potential growing influence of industry in the activities of our neurosurgical organization. Recognizing a need to clarify the proper relationships between neurosurgeons and industry, Guidelines on Neurosurgeon-Industry Conflicts of Interest were recently established. The AANS is committed to the highest ethical and legal standards in future relations with our industry partners. Members of the AANS are encouraged to adhere to the voluntary guidelines established by our organization.

  13. Chemical Educators Stress Industry Ties

    ERIC Educational Resources Information Center

    Worthy, Ward

    1975-01-01

    Describes various courses and programs designed to better prepare graduates to enter the chemical industry, including courses which stress the chemistry of industrial processes, and the economics of the chemical industry. (MLH)

  14. Chemical Educators Stress Industry Ties

    ERIC Educational Resources Information Center

    Worthy, Ward

    1975-01-01

    Describes various courses and programs designed to better prepare graduates to enter the chemical industry, including courses which stress the chemistry of industrial processes, and the economics of the chemical industry. (MLH)

  15. Spanish activities (research and industrial applications) in the field of microwave material treatment

    SciTech Connect

    Catala Civera, J.M.; Reyes Davo, E.R. de los

    1996-12-31

    The GCM (Microwave Heating Group) within the Communications Department at the Technical University of Valencia is dedicated to the study of microwaves and their use in the current industrial processes in the Valencian Community and in Spain. To this end, a microwave heating laboratory has been developed and the benefits of incorporating microwave technologies into current industrial processes have been demonstrated. In this paper some of the industrial applications which are being investigated are presented.

  16. Incorporation of Graphene-Related Carbon Nanosheets in Membrane Fabrication for Water Treatment: A Review

    PubMed Central

    Lawler, Jenny

    2016-01-01

    The minimization of the trade-off between the flux and the selectivity of membranes is a key area that researchers are continually working to optimise, particularly in the area of fabrication of novel membranes. Flux versus selectivity issues apply in many industrial applications of membranes, for example the unwanted diffusion of methanol in fuel cells, retention of valuable proteins in downstream processing of biopharmaceuticals, rejection of organic matter and micro-organisms in water treatment, or salt permeation in desalination. The incorporation of nanosheets within membrane structures can potentially lead to enhancements in such properties as the antifouling ability, hydrophilicy and permeability of membranes, with concomitant improvements in the flux/selectivity balance. Graphene nanosheets and derivatives such as graphene oxide and reduced graphene oxide have been investigated for this purpose, for example inclusion of nanosheets within the active layer of Reverse Osmosis or Nanofiltration membranes or the blending of nanosheets as fillers within Ultrafiltration membranes. This review summarizes the incorporation of graphene derivatives into polymeric membranes for water treatment with a focus on a number of industrial applications, including desalination and pharmaceutical removal, where enhancement of productivity and reduction in fouling characteristics have been afforded by appropriate incorporation of graphene derived nanosheets during membrane fabrication. PMID:27999364

  17. Whey protein isolate edible films with essential oils incorporated to improve the microbial quality of poultry.

    PubMed

    Fernández-Pan, Idoya; Mendoza, Mauricio; Maté, Juan I

    2013-09-01

    Whey protein isolate edible films with oregano or clove essential oils (EOs) incorporated as natural antimicrobials have been developed, with the aim of enhancing the microbial quality of poultry. The effectiveness of the films was determined against both the whole and selected microbiota developed during different periods of cold storage on the surface of skinless chicken breast. Tests were conducted by using both turbidimetric and agar disc diffusion methods. The antimicrobial edible films developed showed high effectiveness against the main spoilers developed on the surface of skinless chicken breasts cold-stored for 8 days. The films based on oregano EO showed greater effectiveness than those based on clove EO. Still, clove EO could be part of an effective antimicrobial edible film. Enterobacteriaceae was the most susceptible to the effect of the films when lower concentrations of EO were incorporated. The largest inhibition surfaces obtained were provoked by films with the highest concentration of oregano EO incorporated against lactic acid bacteria. The antimicrobial edible films developed in this study inhibited the growth of the microbial populations that developed through storage of the chicken breast and caused its spoilage. The results of this research have direct application in the food industry to enhance the control of the development of spoilers such as Pseudomonas spp. or lactic acid bacteria. © 2013 Society of Chemical Industry.

  18. Incorporation of Graphene-Related Carbon Nanosheets in Membrane Fabrication for Water Treatment: A Review.

    PubMed

    Lawler, Jenny

    2016-12-19

    The minimization of the trade-off between the flux and the selectivity of membranes is a key area that researchers are continually working to optimise, particularly in the area of fabrication of novel membranes. Flux versus selectivity issues apply in many industrial applications of membranes, for example the unwanted diffusion of methanol in fuel cells, retention of valuable proteins in downstream processing of biopharmaceuticals, rejection of organic matter and micro-organisms in water treatment, or salt permeation in desalination. The incorporation of nanosheets within membrane structures can potentially lead to enhancements in such properties as the antifouling ability, hydrophilicy and permeability of membranes, with concomitant improvements in the flux/selectivity balance. Graphene nanosheets and derivatives such as graphene oxide and reduced graphene oxide have been investigated for this purpose, for example inclusion of nanosheets within the active layer of Reverse Osmosis or Nanofiltration membranes or the blending of nanosheets as fillers within Ultrafiltration membranes. This review summarizes the incorporation of graphene derivatives into polymeric membranes for water treatment with a focus on a number of industrial applications, including desalination and pharmaceutical removal, where enhancement of productivity and reduction in fouling characteristics have been afforded by appropriate incorporation of graphene derived nanosheets during membrane fabrication.

  19. Effect of the Paper Industry Residue on Properties in the Fresh Mortar

    NASA Astrophysics Data System (ADS)

    Azevedo, A. R. G.; Alexandre, J.; Vieira, C. M. F.; Xavier, C. G.; Zanelato, E. B.; Oliveira, L. I. V.

    The problem of solid was te gene rati on not only restricts construction, the industrial sector in general is a major contributor in this regard. Sol id waste can be of domestic or industrial origin, hence arises a major problem, which are the quantitative generated. The objective of this study is the evaluation and characterization of the incorporation of waste from paper industry in mortars at different levels (0% 5%, 10%, 15% , 20%, 25% and 30%), according properties in the fresh state as consistency index, entrained air content and water retention. It can be said that levels from 20% incorporation in lime, mortar produce very workability.

  20. Incorporation of pollution prevention principles in environmental methods

    SciTech Connect

    Erickson, M.D.; Alvarado, J.S.; Lu, C.-S.; Peterson, D.P.; Silzer, J.

    1996-07-01

    The principles of pollution prevention (P2) have not been sufficiently incorporated into analytical methods. In this paper, we focus on the needs for and the benefits of incorporating the principles of P2 into environmental analytical methods.

  1. 27 CFR 21.6 - Incorporations by reference.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... Analytical Chemists (13th Edition 1980)” (AOAC) is incorporated by reference in this part. This incorporation... the Association of Official Analytical Chemists, 11 North 19th Street, Suite 210, Arlington,...

  2. 27 CFR 21.6 - Incorporations by reference.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... Analytical Chemists (13th Edition 1980)” (AOAC) is incorporated by reference in this part. This incorporation... the Association of Official Analytical Chemists, 11 North 19th Street, Suite 210, Arlington,...

  3. 27 CFR 21.6 - Incorporations by reference.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... Analytical Chemists (13th Edition 1980)” (AOAC) is incorporated by reference in this part. This incorporation... the Association of Official Analytical Chemists, 11 North 19th Street, Suite 210, Arlington,...

  4. 27 CFR 21.6 - Incorporations by reference.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... Analytical Chemists (13th Edition 1980)” (AOAC) is incorporated by reference in this part. This incorporation... the Association of Official Analytical Chemists, 11 North 19th Street, Suite 210, Arlington,...

  5. NEMS industrial module documentation report

    SciTech Connect

    Not Available

    1994-01-01

    The NEMS Industrial Demand Model is a dynamic accounting model, bringing together the disparate industries and uses of energy in those industries, and putting them together in an understandable and cohesive framework. The Industrial Model generates mid-term (up to the year 2010) forecasts of industrial sector energy demand as a component of the NEMS integrated forecasting system. From the NEMS system, the Industrial Model receives fuel prices, employment data, and the value of output of industrial activity. Based on the values of these variables, the Industrial Model passes back to the NEMS system estimates of consumption by fuel types.

  6. Photovoltaic research needs industry perspective

    NASA Technical Reports Server (NTRS)

    Ravi, K. V.

    1982-01-01

    An industries perspective of photovoltaic research needs is presented. Objectives and features of industry needs are discussed for the materials, devices, processes, and reliability research categories.

  7. Incorporating Forecast Uncertainty in Utility Control Center

    SciTech Connect

    Makarov, Yuri V.; Etingov, Pavel V.; Ma, Jian

    2014-07-09

    Uncertainties in forecasting the output of intermittent resources such as wind and solar generation, as well as system loads are not adequately reflected in existing industry-grade tools used for transmission system management, generation commitment, dispatch and market operation. There are other sources of uncertainty such as uninstructed deviations of conventional generators from their dispatch set points, generator forced outages and failures to start up, load drops, losses of major transmission facilities and frequency variation. These uncertainties can cause deviations from the system balance, which sometimes require inefficient and costly last minute solutions in the near real-time timeframe. This Chapter considers sources of uncertainty and variability, overall system uncertainty model, a possible plan for transition from deterministic to probabilistic methods in planning and operations, and two examples of uncertainty-based fools for grid operations.This chapter is based on work conducted at the Pacific Northwest National Laboratory (PNNL)

  8. 43 CFR 46.110 - Incorporating consensus-based management.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ..., whenever practicable, use a consensus-based management approach to the NEPA process. (d) If the Responsible... 43 Public Lands: Interior 1 2010-10-01 2010-10-01 false Incorporating consensus-based management... § 46.110 Incorporating consensus-based management. (a) Consensus-based management incorporates direct...

  9. 43 CFR 34.7 - Incorporation by operation of law.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... 43 Public Lands: Interior 1 2013-10-01 2013-10-01 false Incorporation by operation of law. 34.7... OPPORTUNITY DURING CONSTRUCTION AND OPERATION OF THE ALASKA NATURAL GAS TRANSPORTATION SYSTEM § 34.7 Incorporation by operation of law. (a) The Equal Opportunity Clause shall be deemed incorporated into every...

  10. 49 CFR 384.107 - Matter incorporated by reference.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... 49 Transportation 5 2014-10-01 2014-10-01 false Matter incorporated by reference. 384.107 Section... COMPLIANCE WITH COMMERCIAL DRIVER'S LICENSE PROGRAM General § 384.107 Matter incorporated by reference. (a) Incorporation by reference. This part includes references to certain matter or materials. The text of...

  11. 49 CFR 385.4 - Matter incorporated by reference.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... 49 Transportation 5 2012-10-01 2012-10-01 false Matter incorporated by reference. 385.4 Section 385.4 Transportation Other Regulations Relating to Transportation (Continued) FEDERAL MOTOR CARRIER... FITNESS PROCEDURES General § 385.4 Matter incorporated by reference. (a) Incorporation by...

  12. 49 CFR 384.107 - Matter incorporated by reference.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 49 Transportation 5 2010-10-01 2010-10-01 false Matter incorporated by reference. 384.107 Section... COMPLIANCE WITH COMMERCIAL DRIVER'S LICENSE PROGRAM General § 384.107 Matter incorporated by reference. (a) Incorporation by reference. This part includes references to certain matter or materials. The text of...

  13. 49 CFR 385.4 - Matter incorporated by reference.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... 49 Transportation 5 2014-10-01 2014-10-01 false Matter incorporated by reference. 385.4 Section 385.4 Transportation Other Regulations Relating to Transportation (Continued) FEDERAL MOTOR CARRIER... FITNESS PROCEDURES General § 385.4 Matter incorporated by reference. (a) Incorporation by...

  14. 49 CFR 385.4 - Matter incorporated by reference.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 49 Transportation 5 2011-10-01 2011-10-01 false Matter incorporated by reference. 385.4 Section... FITNESS PROCEDURES General § 385.4 Matter incorporated by reference. (a) Incorporation by reference. Part 385 includes references to certain matter or materials, as listed in paragraph (b) of this...

  15. 49 CFR 384.107 - Matter incorporated by reference.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 49 Transportation 5 2011-10-01 2011-10-01 false Matter incorporated by reference. 384.107 Section... COMPLIANCE WITH COMMERCIAL DRIVER'S LICENSE PROGRAM General § 384.107 Matter incorporated by reference. (a) Incorporation by reference. This part includes references to certain matter or materials. The text of...

  16. 49 CFR 384.107 - Matter incorporated by reference.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... 49 Transportation 5 2012-10-01 2012-10-01 false Matter incorporated by reference. 384.107 Section... COMPLIANCE WITH COMMERCIAL DRIVER'S LICENSE PROGRAM General § 384.107 Matter incorporated by reference. (a) Incorporation by reference. This part includes references to certain matter or materials. The text of...

  17. 49 CFR 385.4 - Matter incorporated by reference.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 49 Transportation 5 2010-10-01 2010-10-01 false Matter incorporated by reference. 385.4 Section... FITNESS PROCEDURES General § 385.4 Matter incorporated by reference. (a) Incorporation by reference. Part 385 includes references to certain matter or materials, as listed in paragraph (b) of this...

  18. 46 CFR 8.110 - Incorporation by reference.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... 46 Shipping 1 2012-10-01 2012-10-01 false Incorporation by reference. 8.110 Section 8.110 Shipping... ALTERNATIVES General § 8.110 Incorporation by reference. (a) Certain material is incorporated by reference into... CFR Part 51. To enforce any edition other than that specified in paragraph (b) of this section, the...

  19. 46 CFR 109.105 - Incorporation by reference.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 46 Shipping 4 2010-10-01 2010-10-01 false Incorporation by reference. 109.105 Section 109.105 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) A-MOBILE OFFSHORE DRILLING UNITS OPERATIONS General § 109.105 Incorporation by reference. (a) Certain material is incorporated by reference...

  20. 48 CFR 1952.102-2 - Incorporation in full text.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 48 Federal Acquisition Regulations System 6 2010-10-01 2010-10-01 true Incorporation in full text... Clauses 1952.102-2 Incorporation in full text. All IAAR provisions and clauses shall be incorporated in solicitations and/or contracts in full text....

  1. 48 CFR 2852.102-270 - Incorporation in full text.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 48 Federal Acquisition Regulations System 6 2010-10-01 2010-10-01 true Incorporation in full text... 2852.102-270 Incorporation in full text. JAR provisions or clauses shall be incorporated in solicitations and contracts in full text....

  2. 40 CFR 1502.21 - Incorporation by reference.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... 40 Protection of Environment 33 2014-07-01 2014-07-01 false Incorporation by reference. 1502.21 Section 1502.21 Protection of Environment COUNCIL ON ENVIRONMENTAL QUALITY ENVIRONMENTAL IMPACT STATEMENT § 1502.21 Incorporation by reference. Agencies shall incorporate material into an environmental impact...

  3. 40 CFR 1502.21 - Incorporation by reference.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... 40 Protection of Environment 34 2012-07-01 2012-07-01 false Incorporation by reference. 1502.21 Section 1502.21 Protection of Environment COUNCIL ON ENVIRONMENTAL QUALITY ENVIRONMENTAL IMPACT STATEMENT § 1502.21 Incorporation by reference. Agencies shall incorporate material into an environmental impact...

  4. 40 CFR 1502.21 - Incorporation by reference.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 40 Protection of Environment 33 2011-07-01 2011-07-01 false Incorporation by reference. 1502.21 Section 1502.21 Protection of Environment COUNCIL ON ENVIRONMENTAL QUALITY ENVIRONMENTAL IMPACT STATEMENT § 1502.21 Incorporation by reference. Agencies shall incorporate material into an environmental impact...

  5. 40 CFR 1502.21 - Incorporation by reference.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... 40 Protection of Environment 34 2013-07-01 2013-07-01 false Incorporation by reference. 1502.21 Section 1502.21 Protection of Environment COUNCIL ON ENVIRONMENTAL QUALITY ENVIRONMENTAL IMPACT STATEMENT § 1502.21 Incorporation by reference. Agencies shall incorporate material into an environmental impact...

  6. 40 CFR 1502.21 - Incorporation by reference.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 40 Protection of Environment 32 2010-07-01 2010-07-01 false Incorporation by reference. 1502.21 Section 1502.21 Protection of Environment COUNCIL ON ENVIRONMENTAL QUALITY ENVIRONMENTAL IMPACT STATEMENT § 1502.21 Incorporation by reference. Agencies shall incorporate material into an environmental impact...

  7. 14 CFR 25.5 - Incorporations by reference.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... AIRWORTHINESS STANDARDS: TRANSPORT CATEGORY AIRPLANES General § 25.5 Incorporations by reference. (a) The materials listed in this section are incorporated by reference in the corresponding sections noted. These...(a) and 1 CFR part 51. These materials are incorporated as they exist on the date of the...

  8. 14 CFR 25.5 - Incorporations by reference.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... AIRWORTHINESS STANDARDS: TRANSPORT CATEGORY AIRPLANES General § 25.5 Incorporations by reference. (a) The materials listed in this section are incorporated by reference in the corresponding sections noted. These...(a) and 1 CFR part 51. These materials are incorporated as they exist on the date of the...

  9. 14 CFR 25.5 - Incorporations by reference.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... AIRWORTHINESS STANDARDS: TRANSPORT CATEGORY AIRPLANES General § 25.5 Incorporations by reference. (a) The materials listed in this section are incorporated by reference in the corresponding sections noted. These...(a) and 1 CFR part 51. These materials are incorporated as they exist on the date of the...

  10. 14 CFR 25.5 - Incorporations by reference.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... AIRWORTHINESS STANDARDS: TRANSPORT CATEGORY AIRPLANES General § 25.5 Incorporations by reference. (a) The materials listed in this section are incorporated by reference in the corresponding sections noted. These...(a) and 1 CFR part 51. These materials are incorporated as they exist on the date of the...

  11. 14 CFR 25.5 - Incorporations by reference.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... AIRWORTHINESS STANDARDS: TRANSPORT CATEGORY AIRPLANES General § 25.5 Incorporations by reference. (a) The materials listed in this section are incorporated by reference in the corresponding sections noted. These...(a) and 1 CFR part 51. These materials are incorporated as they exist on the date of the...

  12. 46 CFR 109.105 - Incorporation by reference.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 46 Shipping 4 2011-10-01 2011-10-01 false Incorporation by reference. 109.105 Section 109.105 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) A-MOBILE OFFSHORE DRILLING UNITS OPERATIONS General § 109.105 Incorporation by reference. (a) Certain material is incorporated by reference...

  13. 46 CFR 109.105 - Incorporation by reference.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... 46 Shipping 4 2013-10-01 2013-10-01 false Incorporation by reference. 109.105 Section 109.105 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) A-MOBILE OFFSHORE DRILLING UNITS OPERATIONS General § 109.105 Incorporation by reference. (a) Certain material is incorporated by reference...

  14. 46 CFR 109.105 - Incorporation by reference.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... 46 Shipping 4 2012-10-01 2012-10-01 false Incorporation by reference. 109.105 Section 109.105 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) A-MOBILE OFFSHORE DRILLING UNITS OPERATIONS General § 109.105 Incorporation by reference. (a) Certain material is incorporated by reference...

  15. 46 CFR 109.105 - Incorporation by reference.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... 46 Shipping 4 2014-10-01 2014-10-01 false Incorporation by reference. 109.105 Section 109.105 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) A-MOBILE OFFSHORE DRILLING UNITS OPERATIONS General § 109.105 Incorporation by reference. (a) Certain material is incorporated by reference...

  16. 40 CFR 282.2 - Incorporation by reference.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    .... (a) Material listed as incorporated by reference in part 282 was approved for incorporation by.... Material is incorporated as it exists on the date of the approval, and notice of any change in the material... Courtland St., NE, Atlanta, GA 30365. (5) Region 5 (Illinois, Indiana, Michigan, Minnesota, Ohio,...

  17. 49 CFR 393.7 - Matter incorporated by reference.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 49 Transportation 5 2010-10-01 2010-10-01 false Matter incorporated by reference. 393.7 Section... ACCESSORIES NECESSARY FOR SAFE OPERATION General § 393.7 Matter incorporated by reference. (a) Incorporation by reference. Part 393 includes references to certain matter or materials, as listed in paragraph (b...

  18. 46 CFR 38.01-3 - Incorporation by reference.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... 46 Shipping 1 2012-10-01 2012-10-01 false Incorporation by reference. 38.01-3 Section 38.01-3....01-3 Incorporation by reference. (a) Certain standards and specifications are incorporated by... ASME Boiler and Pressure Vessel Code Section V, Nondestructive Examination (1986)...

  19. 43 CFR 34.7 - Incorporation by operation of law.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... 43 Public Lands: Interior 1 2014-10-01 2014-10-01 false Incorporation by operation of law. 34.7... OPPORTUNITY DURING CONSTRUCTION AND OPERATION OF THE ALASKA NATURAL GAS TRANSPORTATION SYSTEM § 34.7 Incorporation by operation of law. (a) The Equal Opportunity Clause shall be deemed incorporated into every...

  20. 43 CFR 34.7 - Incorporation by operation of law.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... 43 Public Lands: Interior 1 2012-10-01 2011-10-01 true Incorporation by operation of law. 34.7... OPPORTUNITY DURING CONSTRUCTION AND OPERATION OF THE ALASKA NATURAL GAS TRANSPORTATION SYSTEM § 34.7 Incorporation by operation of law. (a) The Equal Opportunity Clause shall be deemed incorporated into every...

  1. 48 CFR 1952.102-2 - Incorporation in full text.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... 48 Federal Acquisition Regulations System 6 2012-10-01 2012-10-01 false Incorporation in full text... Clauses 1952.102-2 Incorporation in full text. All IAAR provisions and clauses shall be incorporated in solicitations and/or contracts in full text....

  2. 48 CFR 2852.102-270 - Incorporation in full text.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... 48 Federal Acquisition Regulations System 6 2013-10-01 2013-10-01 false Incorporation in full text... 2852.102-270 Incorporation in full text. JAR provisions or clauses shall be incorporated in solicitations and contracts in full text....

  3. 48 CFR 1952.102-2 - Incorporation in full text.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... 48 Federal Acquisition Regulations System 6 2013-10-01 2013-10-01 false Incorporation in full text... Clauses 1952.102-2 Incorporation in full text. All IAAR provisions and clauses shall be incorporated in solicitations and/or contracts in full text....

  4. 48 CFR 1952.102-2 - Incorporation in full text.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... 48 Federal Acquisition Regulations System 6 2014-10-01 2014-10-01 false Incorporation in full text... Clauses 1952.102-2 Incorporation in full text. All IAAR provisions and clauses shall be incorporated in solicitations and/or contracts in full text....

  5. 48 CFR 2852.102-270 - Incorporation in full text.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 48 Federal Acquisition Regulations System 6 2011-10-01 2011-10-01 false Incorporation in full text... 2852.102-270 Incorporation in full text. JAR provisions or clauses shall be incorporated in solicitations and contracts in full text....

  6. 48 CFR 1952.102-2 - Incorporation in full text.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 48 Federal Acquisition Regulations System 6 2011-10-01 2011-10-01 false Incorporation in full text... Clauses 1952.102-2 Incorporation in full text. All IAAR provisions and clauses shall be incorporated in solicitations and/or contracts in full text....

  7. 48 CFR 2852.102-270 - Incorporation in full text.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... 48 Federal Acquisition Regulations System 6 2014-10-01 2014-10-01 false Incorporation in full text... 2852.102-270 Incorporation in full text. JAR provisions or clauses shall be incorporated in solicitations and contracts in full text....

  8. 48 CFR 2852.102-270 - Incorporation in full text.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... 48 Federal Acquisition Regulations System 6 2012-10-01 2012-10-01 false Incorporation in full text... 2852.102-270 Incorporation in full text. JAR provisions or clauses shall be incorporated in solicitations and contracts in full text....

  9. Protein Crystal Growth Dynamics and Impurity Incorporation

    NASA Technical Reports Server (NTRS)

    Chernov, Alex A.; Thomas, Bill

    2000-01-01

    The general concepts and theories of crystal growth are proven to work for biomolecular crystallization. This allowed us to extract basic parameters controlling growth kinetics - free surface energy, alpha, and kinetic coefficient, beta, for steps. Surface energy per molecular site in thermal units, alpha(omega)(sup 2/3)/kT approx. = 1, is close to the one for inorganic crystals in solution (omega is the specific molecular volume, T is the temperature). Entropic restrictions on incorporation of biomolecules into the lattice reduce the incorporation rate, beta, by a factor of 10(exp 2) - 10(exp 3) relative to inorganic crystals. A dehydration barrier of approx. 18kcal/mol may explain approx. 10(exp -6) times difference between frequencies of adding a molecule to the lattice and Brownian attempts to do so. The latter was obtained from AFM measurements of step and kink growth rates on orthorhombic lysozyme. Protein and many inorganic crystals typically do not belong to the Kossel type, thus requiring a theory to account for inequivalent molecular positions within its unit cell. Orthorhombic lysozyme will serve as an example of how to develop such a theory. Factors deteriorating crystal quality - stress and strain, mosaicity, molecular disorder - will be reviewed with emphasis on impurities. Dimers in ferritin and lysozyme and acetylated lysozyme, are microheterogeneous i.e. nearly isomorphic impurities that are shown to be preferentially trapped by tetragonal lysozyme and ferritin crystals, respectively. The distribution coefficient, K defined as a ratio of the (impurity/protein) ratios in crystal and in solution is a measure of trapping. For acetylated lysoyzme, K = 2.15 or, 3.42 for differently acetylated forms, is independent of both the impurity and the crystallizing protein concentration. The reason is that impurity flux to the surface is constant while the growth rate rises with supersaturation. About 3 times lower dimer concentration in space grown ferritin and

  10. Protein Crystal Growth Dynamics and Impurity Incorporation

    NASA Technical Reports Server (NTRS)

    Chernov, Alex A.; Thomas, Bill

    2000-01-01

    The general concepts and theories of crystal growth are proven to work for biomolecular crystallization. This allowed us to extract basic parameters controlling growth kinetics - free surface energy, alpha, and kinetic coefficient, beta, for steps. Surface energy per molecular site in thermal units, alpha(omega)(sup 2/3)/kT approx. = 1, is close to the one for inorganic crystals in solution (omega is the specific molecular volume, T is the temperature). Entropic restrictions on incorporation of biomolecules into the lattice reduce the incorporation rate, beta, by a factor of 10(exp 2) - 10(exp 3) relative to inorganic crystals. A dehydration barrier of approx. 18kcal/mol may explain approx. 10(exp -6) times difference between frequencies of adding a molecule to the lattice and Brownian attempts to do so. The latter was obtained from AFM measurements of step and kink growth rates on orthorhombic lysozyme. Protein and many inorganic crystals typically do not belong to the Kossel type, thus requiring a theory to account for inequivalent molecular positions within its unit cell. Orthorhombic lysozyme will serve as an example of how to develop such a theory. Factors deteriorating crystal quality - stress and strain, mosaicity, molecular disorder - will be reviewed with emphasis on impurities. Dimers in ferritin and lysozyme and acetylated lysozyme, are microheterogeneous i.e. nearly isomorphic impurities that are shown to be preferentially trapped by tetragonal lysozyme and ferritin crystals, respectively. The distribution coefficient, K defined as a ratio of the (impurity/protein) ratios in crystal and in solution is a measure of trapping. For acetylated lysoyzme, K = 2.15 or, 3.42 for differently acetylated forms, is independent of both the impurity and the crystallizing protein concentration. The reason is that impurity flux to the surface is constant while the growth rate rises with supersaturation. About 3 times lower dimer concentration in space grown ferritin and

  11. Incorporating Student Activities into Climate Change Education

    NASA Astrophysics Data System (ADS)

    Steele, H.; Kelly, K.; Klein, D.; Cadavid, A. C.

    2013-12-01

    Under a NASA grant, Mathematical and Geospatial Pathways to Climate Change Education, students at California State University, Northridge integrated Geographic Information Systems (GIS), remote sensing, satellite data technologies, and climate modelling into the study of global climate change under a Pathway for studying the Mathematics of Climate Change (PMCC). The PMCC, which is an interdisciplinary option within the BS in Applied Mathematical Sciences, consists of courses offered by the departments of Mathematics, Physics, and Geography and is designed to prepare students for careers and Ph.D. programs in technical fields relevant to global climate change. Under this option students are exposed to the science, mathematics, and applications of climate change science through a variety of methods including hands-on experience with computer modeling and image processing software. In the Geography component of the program, ESRI's ArcGIS and ERDAS Imagine mapping, spatial analysis and image processing software were used to explore NASA satellite data to examine the earth's atmosphere, hydrosphere and biosphere in areas that are affected by climate change or affect climate. These technology tools were incorporated into climate change and remote sensing courses to enhance students' knowledge and understanding of climate change through hands-on application of image processing techniques to NASA data. Several sets of exercises were developed with specific learning objectives in mind. These were (1) to increase student understanding of climate change and climate change processes; (2) to develop student skills in understanding, downloading and processing satellite data; (3) to teach remote sensing technology and GIS through applications to climate change; (4) to expose students to climate data and methods they can apply to solve real world problems and incorporate in future research projects. In the Math and Physics components of the course, students learned about

  12. Industrial Section Convenor's Report

    NASA Astrophysics Data System (ADS)

    Barone, M.; Riboni, P.

    2002-11-01

    Over the years this conference has gained a solid reputation as an appropriate rostrum for illustrating new concepts in the relations between industry and the scientific world and for introducing new technologies to a large assistance of junior and more experienced scientists. In fact, from the very beginning the founders of this endeavour announced: "The conference is aimed for promoting contacts among scientists involved in particle and fundamental physics, among experimental physicists in other fields and representatives from industry." Facilities at the Conference are designed to fulfil the task: space and general facilities are offered to industry representatives to display their products. This year a more accessible and luminous space arrangement was made available to the exhibitors. At the same time two plenary sessions have been dedicated to selected speakers to illustrate new trends in Technology Transfer, analysis of environment affecting our community, examples of historical successes in the merging of science and industry. We have identified in "GRID" and in "E-Publishing" two major promising areas where our Community will play a prime role as "User" and it was of the general interest to have them illustrated by two personalities directly involved in their development. The flow of knowledge is of course more massive from "Industry" to "Science" than vice-versa, but "Science" to "Industry" move offers an intensive added value. The technology transfer concept with the "Patents" as fund raising tool proved less glorious than expected. Trademark, licensing agreement and " Patents" can assure intellectual properties. But patent is an issue to be used cautiously. Evidence exists that much more efficient transfer of "Science" knowledge to "Economy" is achieved by venture capital move and start-up companies. These two facets of the Technology Transfer business have been covered by Routti's and Bourgeois's lectures.There are two examples of Companies who moved

  13. Tuning the Gas Separation Performance of CuBTC by Ionic Liquid Incorporation.

    PubMed

    Sezginel, Kutay B; Keskin, Seda; Uzun, Alper

    2016-02-02

    The efficient separation of gases has industrial, economic, and environmental importance. Here, the gas separation performance of a metal organic framework (MOF) is enhanced by ionic liquid (IL) incorporation. One of the most commonly used ILs, 1-butyl-3-methylimidazolium tetrafluoroborate ([BMIM][BF4]), was incorporated into a commercially available MOF, CuBTC. Detailed characterization by combining spectroscopy with diffraction, electron microscopy, and thermal analysis confirmed that the structures were intact after incorporation. Adsorption isotherms of CH4, H2, N2, and CO2 in IL-incorporated CuBTC were experimentally measured and compared with those of pristine CuBTC. Consequently, ideal selectivities for CO2/CH4, CO2/N2, CO2/H2, CH4/N2, CH4/H2, and N2/H2 separations were calculated. The results showed that the CH4 selectivity of CuBTC over CO2, H2, and N2 gases becomes at least 1.5 times higher than that of pristine CuBTC upon the incorporation of IL. For example, the CH4/H2 selectivity of CuBTC increased from 26 to 56 at 0.2 bar when the IL loading was 30 wt %. These results show that the incorporation of ILs into MOFs can lead to unprecedented improvements in the gas separation performance of MOFs. The tunable physicochemical properties of ILs combined with a large number of possible MOF structures open up opportunities for the rational design of novel materials for meeting future energy challenges.

  14. The international electronics industry.

    PubMed

    LaDou, J; Rohm, T

    1998-01-01

    High-technology microelectronics has a major presence in countries such as China, India, Indonesia, and Malaysia, now the third-largest manufacturer of semiconductor chips. The migration of European, Japanese, and American companies accommodates regional markets. Low wage rates and limited enforcement of environmental regulations in developing countries also serve as incentives for the dramatic global migration of this industry. The manufacture of microelectonics products is accompanied by a high incidence of occupational illnesses, which may reflect the widespread use of toxic materials. Metals, photoactive chemicals, solvents, acids, and toxic gases are used in a wide variety of combinations and workplace settings. The industry also presents problems of radiation exposure and various occupational stressors, including some unresolved ergonomic issues. The fast-paced changes of the technology underlying this industry, as well as the stringent security precautions, have added to the difficulty of instituting proper health and safety measures. Epidemiologic studies reveal an alarming increase in spontaneous abortions among cleanroom manufacturing workers; no definitive study has yet identified its cause. Other health issues, including occupational cancer, are yet to be studied. The microelectronics industry is a good example of an industry that is exported to many areas of the world before health and safety problems are properly addressed and resolved.

  15. Providers target industrial areas

    SciTech Connect

    Vames, S.

    1997-06-11

    Energy customers in California are negotiating new deals now that the California Public Utilities Commission has dropped its plan to gradually phase in energy deregulation. The commission has set January 1, 1998 as the date when most energy consumers in the state will be free to choose their providers. Deals currently under negotiation are mostly long-term electrical supply contracts with entire cities. Initially, the cities most likely to enter such contracts are those that wish to use the prospect of cheap energy to keep existing industry and lure new industry. One such deal has been set in South San Francisco, and industrial suburb of San Francisco with several fine chemicals and biotechnology firms. The city has signed a five-year contract with FirstPoint (Portland, OR) to provide energy and related services for residents, businesses, and industry. But while residential and small business customers expect to see only a 10% drop in their overall bills, industrial customers foresee larger savings because of discounts to large energy users offered by FirstPoint and the city.

  16. Information and Communications Technology Industry. Industry Study, Spring 2008

    DTIC Science & Technology

    2008-01-01

    Information and Communications Technology Industry The Industrial College of the...4. TITLE AND SUBTITLE Spring 2008. Industry Study. Information and Communications Technology Industry 5a. CONTRACT NUMBER 5b. GRANT NUMBER 5c...unclassified c. THIS PAGE unclassified Standard Form 298 (Rev. 8-98) Prescribed by ANSI Std Z39-18 i INFORMATION & COMMUNICATIONS TECHNOLOGY

  17. Applying industrial symbiosis to chemical industry: A literature review

    NASA Astrophysics Data System (ADS)

    Cui, Hua; Liu, Changhao

    2017-08-01

    Chemical industry plays an important role in promoting the development of global economy and human society. However, the negative effects caused by chemical production cannot be ignored, which often leads to serious resource consumption and environmental pollution. It is essential for chemical industry to achieve a sustainable development. Industrial symbiosis is one of the key topics in the field of industrial ecology and circular economy, which has been identified as a creative path leading to sustainability. Based on an extensively searching for literatures on linking industrial symbiosis with chemical industry, this paper aims to review the literatures which involves three aspects: (1) economic and environmental benefits achieved by chemical industry through implementing industrial symbiosis, (2) chemical eco-industrial parks, (3) and safety issues for chemical industry. An outlook is also provided. This paper concludes that: (1) chemical industry can achieve both economic and environmental benefits by implementing industrial symbiosis, (2) establishing eco-industrial parks is essential for chemical industry to implement and improve industrial symbiosis, and (3) there is a close relationship between IS and safety issues of chemical industry.

  18. Incorporating climate change into systematic conservation planning

    USGS Publications Warehouse

    Groves, Craig R.; Game, Edward T.; Anderson, Mark G.; Cross, Molly; Enquist, Carolyn; Ferdana, Zach; Girvetz, Evan; Gondor, Anne; Hall, Kimberly R.; Higgins, Jonathan; Marshall, Rob; Popper, Ken; Schill, Steve; Shafer, Sarah L.

    2012-01-01

    The principles of systematic conservation planning are now widely used by governments and non-government organizations alike to develop biodiversity conservation plans for countries, states, regions, and ecoregions. Many of the species and ecosystems these plans were designed to conserve are now being affected by climate change, and there is a critical need to incorporate new and complementary approaches into these plans that will aid species and ecosystems in adjusting to potential climate change impacts. We propose five approaches to climate change adaptation that can be integrated into existing or new biodiversity conservation plans: (1) conserving the geophysical stage, (2) protecting climatic refugia, (3) enhancing regional connectivity, (4) sustaining ecosystem process and function, and (5) capitalizing on opportunities emerging in response to climate change. We discuss both key assumptions behind each approach and the trade-offs involved in using the approach for conservation planning. We also summarize additional data beyond those typically used in systematic conservation plans required to implement these approaches. A major strength of these approaches is that they are largely robust to the uncertainty in how climate impacts may manifest in any given region.

  19. Incorporating Hypnosis into Pediatric Clinical Encounters.

    PubMed

    Pendergrast, Robert A

    2017-03-16

    Increasing numbers of licensed health professionals who care for children have been trained in clinical hypnosis. The evidence base for the safety and efficacy of this therapeutic approach in a wide variety of conditions is also growing. Pediatricians and other health professionals who have received training may wish to apply these skills in appropriate clinical scenarios but still may be unsure of the practical matters of how to incorporate this skill-set into day to day practice. Moreover, the practical application of such skills will take very different forms depending on the practice setting, types of acute or chronic conditions, patient and family preferences, and the developmental stages of the child or teen. This article reviews the application of pediatric clinical hypnosis skills by describing the use of hypnotic language outside of formal trance induction, by describing natural trance states that occur in children and teens in healthcare settings, and by describing the process of planning a clinical hypnosis encounter. It is assumed that this article does not constitute training in hypnosis or qualify its readers for the application of such skills; rather, it may serve as a practical guide for those professionals who have been so trained, and may serve to inform other professionals what to expect when referring a patient for hypnotherapy. The reader is referred to specific training opportunities and organizations.

  20. Incorporating outcome standards into perinatal regulations.

    PubMed

    Turnock, B J; Masterson, J W

    1986-01-01

    State and local governments license and monitor hospitals to ensure that a minimum acceptable level of care is present as one means of improving the outcomes and health status of patients served. Standards developed to achieve these purposes, however, have focused almost exclusively on the inputs and processes believed to be necessary for quality care and optimal services. Even when the overwhelming consensus of professionals and providers is that such standards impact positively on outcomes, direct evidence of such causal relationships is often lacking. In 1983, the Chicago Department of Health began incorporating direct measurement of outcomes into its mandated regulatory functions for one operating unit of hospitals--the maternity and newborn services. Crude perinatal and neonatal mortality rates for Chicago hospitals are adjusted using an indirect standardization process that controls for both race and birth weight. This process allows for the calculation of adjusted mortality rates and standardized mortality ratios (SMRs) that are used as an initial screening instrument. Additional evaluation and investigation activities are then directed to hospitals identified through the initial screening process as meriting further study. Hospitals are also evaluated for compliance with the traditional standards and requirements. Information derived from both outcome and compliance evaluations is used to determine monitoring and regulatory activities such as penalties, waivers, and periodicity of future inspections. Use of this Outcome-Oriented Perinatal Surveillance System appears to be an objective, understandable, and acceptable basis for establishing monitoring, evaluation, and regulatory strategies for hospitals with maternity and newborn units.

  1. Incorporating Hypnosis into Pediatric Clinical Encounters

    PubMed Central

    Pendergrast, Robert A.

    2017-01-01

    Increasing numbers of licensed health professionals who care for children have been trained in clinical hypnosis. The evidence base for the safety and efficacy of this therapeutic approach in a wide variety of conditions is also growing. Pediatricians and other health professionals who have received training may wish to apply these skills in appropriate clinical scenarios but still may be unsure of the practical matters of how to incorporate this skill-set into day to day practice. Moreover, the practical application of such skills will take very different forms depending on the practice setting, types of acute or chronic conditions, patient and family preferences, and the developmental stages of the child or teen. This article reviews the application of pediatric clinical hypnosis skills by describing the use of hypnotic language outside of formal trance induction, by describing natural trance states that occur in children and teens in healthcare settings, and by describing the process of planning a clinical hypnosis encounter. It is assumed that this article does not constitute training in hypnosis or qualify its readers for the application of such skills; rather, it may serve as a practical guide for those professionals who have been so trained, and may serve to inform other professionals what to expect when referring a patient for hypnotherapy. The reader is referred to specific training opportunities and organizations. PMID:28300761

  2. Improved Josephson Qubits incorporating Crystalline Silicon Dielectrics

    NASA Astrophysics Data System (ADS)

    Gao, Yuanfeng; Maurer, Leon; Hover, David; Patel, Umeshkumar; McDermott, Robert

    2010-03-01

    Josephson junction phase quibts are a leading candidate for scalable quantum computing in the solid state. Their energy relaxation times are currently limited by microwave loss induced by a high density of two-level state (TLS) defects in the amorphous dielectric films of the circuit. It is expected that the integration of crystalline, defect-free dielectrics into the circuits will yield substantial improvements in qubit energy relaxation times. However, the epitaxial growth of a crystalline dielectric on a metal underlayer is a daunting challenge. Here we describe a novel approach in which the crystalline silicon nanomembrane of a Silicon-on-Insulator (SOI) wafer is used to form the junction shunt capacitor. The SOI wafer is thermocompression bonded to the device wafer. The handle and buried oxide layers of the SOI are then etched away, leaving the crystalline silicon layer for subsequent processing. We discuss device fabrication issues and present microwave transport data on lumped-element superconducting resonators incorporating the crystalline silicon.

  3. Differential gene detection incorporating common expression patterns

    NASA Astrophysics Data System (ADS)

    Oba, Shigeyuki; Ishii, Shin

    2009-12-01

    In detection of differentially expressed (DE) genes between different groups of samples based on a high-throughput expression measurement system, we often use a classical statistical testing based on a simple assumption that the expression of a certain DE gene in one group is higher or lower in average than that in the other group. Based on this simple assumption, the theory of optimal discovery procedure (ODP) (Storey, 2005) provided an optimal thresholding function for DE gene detection. However, expression patterns of DE genes over samples may have such a structure that is not exactly consistent with group labels assigned to the samples. Appropriate treatment of such a structure can increase the detection ability. Namely, genes showing similar expression patterns to other biologically meaningful genes can be regarded as statistically more significant than those showing expression patterns independent of other genes, even if differences in mean expression levels are comparable. In this study, we propose a new statistical thresholding function based on a latent variable model incorporating expression patterns together with the ODP theory. The latent variable model assumes hidden common signals behind expression patterns over samples and the ODP theory is extended to involve the latent variables. When applied to several gene expression data matrices which include cluster structures or 'cancer outlier' structures, the newly-proposed thresholding functions showed prominently better detection performance of DE genes than the original ODP thresholding function did. We also demonstrate how the proposed methods behave through analyses of real breast cancer and lymphoma datasets.

  4. Incorporating High-Throughput Exposure Predictions with ...

    EPA Pesticide Factsheets

    We previously integrated dosimetry and exposure with high-throughput screening (HTS) to enhance the utility of ToxCast™ HTS data by translating in vitro bioactivity concentrations to oral equivalent doses (OEDs) required to achieve these levels internally. These OEDs were compared against regulatory exposure estimates, providing an activity-to-exposure ratio (AER) useful for a risk-based ranking strategy. As ToxCast™ efforts expand (i.e., Phase II) beyond food-use pesticides towards a wider chemical domain that lacks exposure and toxicity information, prediction tools become increasingly important. In this study, in vitro hepatic clearance and plasma protein binding were measured to estimate OEDs for a subset of Phase II chemicals. OEDs were compared against high-throughput (HT) exposure predictions generated using probabilistic modeling and Bayesian approaches generated by the U.S. EPA ExpoCast™ program. This approach incorporated chemical-specific use and national production volume data with biomonitoring data to inform the exposure predictions. This HT exposure modeling approach provided predictions for all Phase II chemicals assessed in this study whereas estimates from regulatory sources were available for only 7% of chemicals. Of the 163 chemicals assessed in this study, three or 13 chemicals possessed AERs <1 or <100, respectively. Diverse bioactivities y across a range of assays and concentrations was also noted across the wider chemical space su

  5. Incorporating Ecosystem Services into Community-level ...

    EPA Pesticide Factsheets

    EPA’s Office of Research and Development’s Sustainable and Healthy Communities Research Program is developing tools and approaches to incorporate ecosystem goods and services concepts into community-level decision-making. The San Juan Community Study is one of a series of coordinated community studies, which also include Mobile Bay, AL, Great Lakes Areas of Concern, and the Pacific Northwest. Common elements across the community studies include a focus on watershed management and national estuary programs (National Estuary Program, National Estuarine Research Reserve System). San Juan, Puerto Rico, is unique from the other community studies in that it is located in a highly urbanized watershed integrated with a number of freshwater and coastal ecosystems. The San Juan Community Study will explore linkages between watershed management decisions (e.g., dredging canals, restoration of mangrove buffers, sewage discharge interventions, climate adaptive strategies) targeting priority stressors (e.g., nutrients, contaminants, and pathogens; aquatic debris; habitat loss; modified hydrology and water circulation; sea level rise; storm intensity and frequency) effecting the condition of ecosystems (e.g., estuarine habitats and fish, as well as the connected terrestrial and coastal ecosystems), associated ecosystem goods and services (e.g., tourism and recreation, fishing, nutrient & sediment retention, contaminant processing, carbon sequestration, flood protection),

  6. DNA-incorporating nanomaterials in biotechnological applications

    SciTech Connect

    Stadler, A.; van der Lelie, D.; Chi, C.; Gang, O.

    2010-02-01

    The recently developed ability to controllably connect biological and inorganic objects on a molecular scale opens a new page in biomimetic methods with potential applications in biodetection, tissue engineering, targeted therapeutics and drug/gene delivery. Particularly in the biodetection arena, a rapid development of new platforms has largely been stimulated by a spectrum of novel nanomaterials with physical properties that offer efficient, sensitive and inexpensive molecular sensing. Recently, DNA-functionalized nano-objects have emerged as a new class of nanomaterials that can be controllably assembled in predesigned structures. Such DNA-based nanoscale structures might provide a new detection paradigm due to their regulated optical, electrical and magnetic responses, chemical heterogeneity and high local biomolecular concentration. The specific biorecognition DNA and its physical-chemical characteristics allows for an exploitation of DNA-functionalized nanomaterials for sensing of nucleic acids, while a broad tunability of DNA interactions permits extending their use for detection of proteins, small molecules and ions. We discuss the progress that was achieved in the last decade in the exploration of new detection methods based on DNA-incorporating nanomaterials as well as their applications to gene delivery. The comparison between various detection platforms, their sensitivity and selectivity, and specific applications are reviewed.

  7. Incorporating routing into reservoir planning optimization models

    NASA Astrophysics Data System (ADS)

    Zmijewski, Nicholas; Wörman, Anders; Bottacin-Busolin, Andrea

    2015-04-01

    To achieve the best overall operation result in a reservoir network, optimization models are used. For larger reservoir networks the computational cost increases, making simplification of the hydrodynamic description necessary. In-accuracy in flow prediction can be related to an incurred sub-optimality in production planning. Flow behavior in a management optimization model is often described using a constant time-lag model. A simplified hydraulic model was used, describing the stream flow in a reservoir network for short term production planning of a case-study reservoir network (Dalälven River). In this study, the importance of incorporating hydrodynamic wave diffusion for optimized hydropower production planning in a regulated water system was examined, comparing the kinematic-wave model to the constant time-lag. The receding horizon optimization procedure was applied, emulating the data-assimilation procedure present in modern operations. Power production was shown to deviate from the planned production while considering a single time-lag, as a function of the stream description. The simplification of using a constant time-lag could be considered acceptable for streams characterized by high Peclet number. Examining the effect of the effect of the length of the decision time-step demonstrated the importance of high frequency data assimilation for streams characterized by low Peclet numbers. Further, it was shown that the variability in flow becomes more ordered as a result of management and that the Peclet number contributes to that goal.

  8. Incorporating flow into practice and performance.

    PubMed

    Kirchner, Joann Marie

    2011-01-01

    In the music profession, individuals often work under stress filled conditions. This is especially true for individuals making their living as performing musicians. Musical performance anxiety has been well documented in both students and professionals. For some, the experience may lead to a termination of what might otherwise remain a successful performing career. Humans are susceptible to anxiety and so the phenomenon of musical performance anxiety is not likely to disappear. Learning how to effectively deal with musical performance anxiety is paramount for those in the performing arts. Entering a state of flow, in which there is total absorption in an activity, allows for the possiblity of any ensuing anxiety to become facilitative, rather than debilitative. This article will discuss several characteristics of flow, as defined by Mihalyi Csikszentmihalyi, and provide practical applications for musical practice and performance in an attempt to counterbalance musical performance anxiety. Musicians will benefit from a closer examination of the elements of flow and means of incorporating these elements into practice and performance.

  9. Transmission/disequilibrium tests incorporating unaffected offspring.

    PubMed

    Wei, Qinyu; Chen, Yuanli; Zeng, Zheng; Shu, Chang; Long, Lu; Lu, Jianhua; Huang, Yangxin; Yin, Ping

    2014-01-01

    We propose a new method for family-based tests of association and linkage called transmission/disequilibrium tests incorporating unaffected offspring (TDTU). This new approach, constructed based on transmission/disequilibrium tests for quantitative traits (QTDT), provides a natural extension of the transmission/disequilibrium test (TDT) to utilize transmission information from heterozygous parents to their unaffected offspring as well as the affected offspring from ascertained nuclear families. TDTU can be used in various study designs and can accommodate all types of independent nuclear families with at least one affected offspring. When the study sample contains only case-parent trios, the TDTU is equivalent to TDT. Informative-transmission disequilibrium test (i-TDT) and generalized disequilibrium test(GDT) are another two methods that can use information of both unaffected offspring and affected offspring. In contract to i-TDT and GDT, the test statistic of TDTU is simpler and more explicit, and can be implemented more easily. Through computer simulations, we demonstrate that power of the TDTU is slightly higher compared to i-TDT and GDT. All the three methods are more powerful than method that uses affected offspring only, suggesting that unaffected siblings also provide information about linkage and association.

  10. Incorporating infiltration modelling in urban flood management

    NASA Astrophysics Data System (ADS)

    Jumadar, A. S.; Pathirana, A.; Gersonius, B.; Zevenbergen, C.

    2008-06-01

    Increasing frequency and intensity of flood events in urban areas can be linked to increase in impervious area due to urbanization, exacerbated by climate change. The established approach of conveying storm water by conventional drainage systems has contributed to magnification of runoff volume and peak flows beyond those of undeveloped catchments. Furthermore, the continuous upgrading of such conventional systems is costly and unsustainable in the long term. Sustainable drainage systems aim at addressing the adverse effects associated with conventional systems, by mimicking the natural drainage processes, encouraging infiltration and storage of storm water. In this study we model one of the key components of SuDS, the infiltration basins, in order to assert the benefits of the approach. Infiltration modelling was incorporated in the detention storage unit within the one-dimensional urban storm water management model, EPA-SWMM 5.0. By introduction of infiltration modelling in the storage, the flow attenuation performance of the unit was considerably improved. The study also examines the catchment scale impact of both source and regional control storage/infiltration systems. Based on the findings of two case study areas modelled with the proposed options, it was observed that source control systems have a greater and much more natural impact at a catchment level, with respect to flow attenuation, compared to regional control systems of which capacity is equivalent to the sum of source control capacity at the catchment.

  11. Industrial Assessment Center Program

    SciTech Connect

    Dr. Dereje Agonafer

    2007-11-30

    The work described in this report was performed under the direction of the Industrial Assessment Center (IAC) at University of Texas at Arlington. The IAC at The University of Texas at Arlington is managed by Rutgers University under agreement with the United States Department of Energy Office of Industrial Technology, which financially supports the program. The objective of the IAC is to identify, evaluate, and recommend, through analysis of an industrial plant’s operations, opportunities to conserve energy and prevent pollution, thereby reducing the associated costs. IAC team members visit and survey the plant. Based upon observations made in the plant, preventive/corrective actions are recommended. At all times we try to offer specific and quantitative recommendations of cost savings, energy conservation, and pollution prevention to the plants we serve.

  12. The international petrochemical industry

    SciTech Connect

    Chapman, K.

    1991-01-01

    The petrochemical industry occupies a crucial place in economic, strategic and political terms in the twentieth century. The author explains its growth and international distribution from the 1920s tot he present, relating the particular experience of petrochemicals to the processes that have shaped the long-term evolution of industry in general. The geographical coverage of this book extends from the regional to international scale, and its historical scope embraces one hundred years from the laboratory origins of polymer science and petrochemistry to the massive operations of modern industry. It represents the result of twenty years of research, and reflects the author's privileged access to company sources in both the U.S. and Europe.

  13. Emulsified industrial oils recycling

    SciTech Connect

    Gabris, T.

    1982-04-01

    The industrial lubricant market has been analyzed with emphasis on current and/or developing recycling and re-refining technologies. This task has been performed for the United States and other industrialized countries, specifically France, West Germany, Italy and Japan. Attention has been focused at emulsion-type fluids regardless of the industrial application involved. It was found that emulsion-type fluids in the United States represent a much higher percentage of the total fluids used than in other industrialized countries. While recycling is an active matter explored by the industry, re-refining is rather a result of other issues than the mere fact that oil can be regenerated from a used industrial emulsion. To extend the longevity of an emulsion is a logical step to keep expenses down by using the emulsion as long as possible. There is, however, another important factor influencing this issue: regulations governing the disposal of such fluids. The ecological question, the respect for nature and the natural balances, is often seen now as everybody's task. Regulations forbid dumping used emulsions in the environment without prior treatment of the water phase and separation of the oil phase. This is a costly procedure, so recycling is attractive since it postpones the problem. It is questionable whether re-refining of these emulsions - as a business - could stand on its own if these emulsions did not have to be taken apart for disposal purposes. Once the emulsion is separated into a water and an oil phase, however, re-refining of the oil does become economical.

  14. Remediation of metal polluted mine soil with compost: co-composting versus incorporation.

    PubMed

    Tandy, Susan; Healey, John R; Nason, Mark A; Williamson, Julie C; Jones, Davey L

    2009-02-01

    Trace element contamination of post-industrial sites represents a major environmental problem and sustainable management options for remediating them are required. This study compared two strategies for immobilizing trace elements (Cu, Pb, Zn, and As) in mine spoil: (1) co-composting contaminated soil with organic wastes and (2) conventional incorporation of mature compost into contaminated soil. Sequential chemical extraction of the soil was performed to determine temporal changes in trace element fractionation and bioavailability during composting and plant growth. We show that mine spoil can be co-composted successfully and this action causes significant shifts in metal availability. However, co-composting did not lead to significant differences in metal partitioning in soil or in plant metal uptake compared with simply mixing mine spoil with mature compost. Both treatments promoted plant growth and reduced metal accumulation in plants. We conclude that co-composting provides little additional benefit for remediating trace-element-polluted soil compared with incorporation of compost.

  15. Physicochemical and sensory quality of yogurt incorporated with pectin from peel of Citrus sinensis.

    PubMed

    Arioui, Fatiha; Ait Saada, Djamel; Cheriguene, Abderrahim

    2017-03-01

    Industrial by-product like orange peel plays an important role in pectin manufacture. The objective of this article was to extract pectin from peel of Citrus sinensis and to study the effect of its incorporation on the quality of yogurt during the period of fermentation and postacidification. Physicochemical, organoleptic, and rheological properties of yogurt prepared with pectin were studied in order to determine the best preparation depending on the rate of pectin. The extraction pectin yield was estimated to more than 24%. The viscosity and acidity were increased with increasing of the pectin rate. The best viscosity value was obtained with 0.6% of pectin. Furthermore, the effect of the rate of pectin incorporation in the fermented milks was clearly observed on the number of Streptococcus thermophilus and Lactobacillus bulgaricus, the cohesiveness, the adhesiveness, the taste, and the whey exudation.

  16. Overview of infrared in the petroleum industry

    NASA Astrophysics Data System (ADS)

    Ohliger, Albert A.

    2003-04-01

    Infrared Thermography has been found to be a very valuable tool in the petroleum industry. It has had focus in surveying all the types of equipment in its asset base. This includes electrical distribution systems, pumping systems, piping systems, exchangers, flares, process fired heaters and many other types of equipment. The petroleum industry is divided into three basic operating areas; Upstream, Midstream and Downstream. Upstream operation covers the exploration, drilling and production of natural gas and crude oil. Midstream operation in the petroleum industry is the distribution and storage system between the Upstream to the Downstream systems. Downstream operations make the finished energy product and are the refineries and chemical plants. As in other industries, the petroleum industry has mechanical equipment, electrical equipment, pressure-containing equipment, and fixed structures. In addition to this equipment, there is some specialty equipment which includes items such as fired heaters and specialty process vessels. The industry has put in place infrared programs as a predictive maintenance tool in many of their operating areas. Using infrared to monitor the operating integrity on equipment is one of the synergies now being better developed. The opportunity is to define measurable thermal patterns that can be used to define defects and predict failures. Infrared technology is a mature reliability work process and been around for many years. The first commercial infrared camera was available in the '70's. These radiometric cameras and the support equipment have had many improvements since then. The use of the technology has also been improved with synergies incorporated from many type of industries, including the military. Infrared is a technology that has been added to the predictive & preventative maintenance toolbox of the petroleum industry reliability focus. An important part of any reliability work process is to have predictive tools to define

  17. Investigation of tritium incorporation of tritium incorporation by means of excreted metabolites.

    PubMed

    Biró, T; Szilágyi, M

    1978-01-01

    The commonly accepted urine analysis by liquid scintillation method was applied for whole body dose estimating. After the separation of metabolite fractions the organically bound tritium in urine could be measured. Urine samples from workers repeatedly exposed to tritium incorporation during the chemical processing of various labeled compounds have been collected and analyzed. The time dependence of tritium activity in certain metabolites was found to be characteristic, significantly differing from the 3H concentration curve of the native or treated urine sample.

  18. Transferring Technology to Industry

    NASA Technical Reports Server (NTRS)

    Wolfenbarger, J. Ken

    2006-01-01

    This slide presentation reviews the technology transfer processes in which JPL has been involved to assist in transferring the technology derived from aerospace research and development to industry. California Institute of Technology (CalTech), the organization that runs JPL, is the leading institute in patents for all U.S. universities. There are several mechanisms that are available to JPL to inform industry of these technological advances: (1) a dedicated organization at JPL, National Space Technology Applications (NSTA), (2) Tech Brief Magazine, (3) Spinoff magazine, and (4) JPL publications. There have also been many start-up organizations and businesses from CalTech.

  19. INDUSTRIAL ASSESSMENT CENTER PROGRAM

    SciTech Connect

    ASFAW BEYENE

    2008-09-29

    Since its establishment in 1990, San Diego State University’s Industrial Assessment Center (IAC) has served close to 400 small and medium-sized manufacturing plants in Southern California. SDSU/IAC’s efforts to transfer state-of-the-art technologies to industry have increased revenues, cultivated creativity, improved efficiencies, and benefited the environment. A substantial benefit from the program has been the ongoing training of engineering faculty and students. During this funding cycle, SDSU/IAC has trained 31 students, 7 of the graduate. A total of 92 assessments and 108 assessment days were completed, resulting in 638 assessment recommendations.

  20. China's growing biomedical industry.

    PubMed

    Han, Pei

    2009-06-01

    The biomedical industry in China is developing rapidly, and new biological drugs are increasing their share of the pharmaceutical market based on people's needs. China is the largest producer and user of vaccines in the world, but the existing production of vaccines is far from enough to meet the needs of the market. The entire market of biological drugs in China is still smaller than that for traditional medicines and chemicals. Therefore, the biopharmaceutical industry has the potential to be the rising star in the pharmaceutical market in the future.