Lift truck safety review

DOE Office of Scientific and Technical Information (OSTI.GOV)

Cadwallader, L.C.

1997-03-01

This report presents safety information about powered industrial trucks. The basic lift truck, the counterbalanced sit down rider truck, is the primary focus of the report. Lift truck engineering is briefly described, then a hazard analysis is performed on the lift truck. Case histories and accident statistics are also given. Rules and regulations about lift trucks, such as the US Occupational Safety an Health Administration laws and the Underwriter`s Laboratories standards, are discussed. Safety issues with lift trucks are reviewed, and lift truck safety and reliability are discussed. Some quantitative reliability values are given.

49 CFR 238.419 - Truck-to-car-body and truck component attachment.

Code of Federal Regulations, 2014 CFR

2014-10-01

... 49 Transportation 4 2014-10-01 2014-10-01 false Truck-to-car-body and truck component attachment... Specific Requirements for Tier II Passenger Equipment § 238.419 Truck-to-car-body and truck component attachment. (a) The ultimate strength of the truck-to-car-body attachment for each unit in a train shall be...

49 CFR 238.419 - Truck-to-car-body and truck component attachment.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 49 Transportation 4 2010-10-01 2010-10-01 false Truck-to-car-body and truck component attachment... Specific Requirements for Tier II Passenger Equipment § 238.419 Truck-to-car-body and truck component attachment. (a) The ultimate strength of the truck-to-car-body attachment for each unit in a train shall be...

49 CFR 238.419 - Truck-to-car-body and truck component attachment.

Code of Federal Regulations, 2011 CFR

2011-10-01

... 49 Transportation 4 2011-10-01 2011-10-01 false Truck-to-car-body and truck component attachment... Specific Requirements for Tier II Passenger Equipment § 238.419 Truck-to-car-body and truck component attachment. (a) The ultimate strength of the truck-to-car-body attachment for each unit in a train shall be...

Truck Traffic Iowa : 2010

DOT National Transportation Integrated Search

2011-01-01

Truck volumes represented on this map are Annual Average Daily Traffic Volumes between major traffic generators: i.e., Highway Junctions and Cities. : Truck volumes include 6-Tire and 3 Axle single unit trucks, buses and all multiple unit trucks.

New regression model for predicting hand-arm vibration (HAV) of Malaysian Army (MA) three-tonne truck steering wheels.

PubMed

Aziz, Shamsul Akmar Ab; Nuawi, Mohd Zaki; Nor, Mohd Jailani Mohd

2015-01-01

The objective of this study was to present a new method for determination of hand-arm vibration (HAV) in Malaysian Army (MA) three-tonne truck steering wheels based on changes in vehicle speed using regression model and the statistical analysis method known as Integrated Kurtosis-Based Algorithm for Z-Notch Filter Technique Vibro (I-kaz Vibro). The test was conducted for two different road conditions, tarmac and dirt roads. HAV exposure was measured using a Brüel & Kjær Type 3649 vibration analyzer, which is capable of recording HAV exposures from steering wheels. The data was analyzed using I-kaz Vibro to determine the HAV values in relation to varying speeds of a truck and to determine the degree of data scattering for HAV data signals. Based on the results obtained, HAV experienced by drivers can be determined using the daily vibration exposure A(8), I-kaz Vibro coefficient (Ƶ(v)(∞)), and the I-kaz Vibro display. The I-kaz Vibro displays also showed greater scatterings, indicating that the values of Ƶ(v)(∞) and A(8) were increasing. Prediction of HAV exposure was done using the developed regression model and graphical representations of Ƶ(v)(∞). The results of the regression model showed that Ƶ(v)(∞) increased when the vehicle speed and HAV exposure increased. For model validation, predicted and measured noise exposures were compared, and high coefficient of correlation (R(2)) values were obtained, indicating that good agreement was obtained between them. By using the developed regression model, we can easily predict HAV exposure from steering wheels for HAV exposure monitoring.

Approaches of truck drivers and non-truck drivers toward reckless on-road behavior.

PubMed

Rosenbloom, Tova; Eldror, Ehud; Shahar, Amit

2009-07-01

The purpose of the study was to compare the reported approaches of truck drivers to those of non-truck drivers toward reckless on-road behaviors. One hundred and sixty-seven adult males, including 70 non-truck drivers, completed the questionnaires voluntarily. The truck drivers were employees of a concrete manufacturing company working at various company plants throughout Israel. Seventy were professional mixer truckers and 27 were tip-truckers. The participants completed the Reckless Driving Self-Report Scale based on Taubman Ben-Ari et al. [Taubman Ben-Ari, O., Florian, V., Mikulincer, M., 1999. The impact of mortality salience on reckless driving: a test of terror management mechanisms. Journal of Personality and Social Psychology 76, 35-45], adapted for truck drivers for this study. It was expected that non-professional, as compared to professional (truck) drivers, would be more permissive regarding reckless driving, since driving risks are less prominent in their daily driving experience. An ANOVA performed on mean reckless-driving scores yielded significant results. The post hoc Schéffe test indicated significantly higher reckless-driving scores for automobile drivers as compared to both mixer-truck driver scores and tip-truck driver scores. In addition, the reckless-driving scores for mixer-truck drivers were significantly higher than the tip-truck driver scores. We discuss various explanations for the findings and consider possible implications for training strategies in organizations as well as for media campaigns focused on mutual safe road use of truck drivers and private vehicle drivers.

Investigation of human body vibration exposures on haul trucks operating at U.S. surface mines/quarries relative to haul truck activity.

PubMed

Mayton, Alan G; Porter, William L; Xu, Xueyan S; Weston, Eric B; Rubenstein, Elaine N

2018-03-01

Workers who operate mine haul trucks are exposed to whole-body vibration (WBV) on a routine basis. Researchers from the National Institute for Occupational Safety and Health (NIOSH) Pittsburgh Mining Research Division (PMRD) investigated WBV and hand-arm vibration (HAV) exposures for mine/quarry haul truck drivers in relation to the haul truck activities of dumping, loading, and traveling with and without a load. The findings show that WBV measures in weighted root-mean-square accelerations (a w ) and vibration dose value (VDV), when compared to the ISO/ANSI and European Directive 2002/44/EC standards, were mostly below the Exposure Action Value (EAV) identified by the health guidance caution zone (HGCZ). Nevertheless, instances were recorded where the Exposure Limit Value (ELV) was exceeded by more than 500 to 600 percent for VDV x and a wx , respectively. Researchers determined that these excessive levels occurred during the traveling empty activity, when the haul truck descended down grade into the pit loading area, sliding at times, on a wet and slippery road surface caused by rain and overwatering. WBV levels (not normalized to an 8-h shift) for the four haul truck activities showed mean a wz levels for five of the seven drivers exceeding the ISO/ANSI EAV by 9-53 percent for the traveling empty activity. Mean a wx and a wz levels were generally higher for traveling empty and traveling loaded and lower for loading/dumping activities. HAV for measures taken on the steering wheel and shifter were all below the HGCZ which indicates that HAV is not an issue for these drivers/operators when handling steering and shifting control devices.

Investigation of human body vibration exposures on haul trucks operating at U.S. surface mines/quarries relative to haul truck activity

PubMed Central

Mayton, Alan G.; Porter, William L.; Xu, Xueyan S.; Weston, Eric B.; Rubenstein, Elaine N.

2018-01-01

Workers who operate mine haul trucks are exposed to whole-body vibration (WBV) on a routine basis. Researchers from the National Institute for Occupational Safety and Health (NIOSH) Pittsburgh Mining Research Division (PMRD) investigated WBV and hand-arm vibration (HAV) exposures for mine/quarry haul truck drivers in relation to the haul truck activities of dumping, loading, and traveling with and without a load. The findings show that WBV measures in weighted root-mean-square accelerations (aw) and vibration dose value (VDV), when compared to the ISO/ANSI and European Directive 2002/44/EC standards, were mostly below the Exposure Action Value (EAV) identified by the health guidance caution zone (HGCZ). Nevertheless, instances were recorded where the Exposure Limit Value (ELV) was exceeded by more than 500 to 600 percent for VDVx and awx, respectively. Researchers determined that these excessive levels occurred during the traveling empty activity, when the haul truck descended down grade into the pit loading area, sliding at times, on a wet and slippery road surface caused by rain and overwatering. WBV levels (not normalized to an 8-h shift) for the four haul truck activities showed mean awz levels for five of the seven drivers exceeding the ISO/ANSI EAV by 9–53 percent for the traveling empty activity. Mean awx and awz levels were generally higher for traveling empty and traveling loaded and lower for loading/dumping activities. HAV for measures taken on the steering wheel and shifter were all below the HGCZ which indicates that HAV is not an issue for these drivers/operators when handling steering and shifting control devices. PMID:29725145

Truck trip generation data

DOT National Transportation Integrated Search

2001-01-01

The increased importance of truck activity in both transportation engineering and planning : has created a need for truck-oriented analytical tools. A particular planning need is for trip : generation data that can be used to estimate truck traffic p...

49 CFR 399.207 - Truck and truck-tractor access requirements.

Code of Federal Regulations, 2010 CFR

2010-10-01

... MOTOR CARRIER SAFETY ADMINISTRATION, DEPARTMENT OF TRANSPORTATION FEDERAL MOTOR CARRIER SAFETY REGULATIONS EMPLOYEE SAFETY AND HEALTH STANDARDS Step, Handhold, and Deck Requirements for Commercial Motor Vehicles § 399.207 Truck and truck-tractor access requirements. (a) General rule. Any person entering or...

Truck Noise XI : Evaluation and Reduction of Heavy-Duty Truck Noise

DOT National Transportation Integrated Search

1976-09-01

This report describes the work performed to examine the noise sources on two common truck configurations manufactured by this company, and to evaluate the noise reduction effectiveness of retrofit hardware. The two trucks selected were Cab-Over-Engin...

Vehicle to vehicle communications for trucks.

DOT National Transportation Integrated Search

2014-01-01

The trucking industry is a critical component of American commerce. The American : Trucking Association estimates that over 80 percent of U.S. communities depend : exclusively on trucking for delivery of their goods and commodities

Heavy truck casualty collisions, 2001-2005

DOT National Transportation Integrated Search

2010-04-01

This document reviews casualty collisions (fatalities and injuries) involving heavy trucks in Canada : from 2001 to 2005. Collisions involving heavy trucks include all vehicles in these collisions, such as : passenger cars, light trucks and vans, hea...

Log Truck-Weighing System

NASA Technical Reports Server (NTRS)

1977-01-01

ELDEC Corp., Lynwood, Wash., built a weight-recording system for logging trucks based on electronic technology the company acquired as a subcontractor on space programs such as Apollo and the Saturn launch vehicle. ELDEC employed its space-derived expertise to develop a computerized weight-and-balance system for Lockheed's TriStar jetliner. ELDEC then adapted the airliner system to a similar product for logging trucks. Electronic equipment computes tractor weight, trailer weight and overall gross weight, and this information is presented to the driver by an instrument in the cab. The system costs $2,000 but it pays for itself in a single year. It allows operators to use a truck's hauling capacity more efficiently since the load can be maximized without exceeding legal weight limits for highway travel. Approximately 2,000 logging trucks now use the system.

49 CFR 523.9 - Truck tractors.

Code of Federal Regulations, 2011 CFR

2011-10-01

..., DEPARTMENT OF TRANSPORTATION VEHICLE CLASSIFICATION § 523.9 Truck tractors. Truck tractors for the purpose of this part are considered as any truck tractor as defined in 49 CFR part 571 having a GVWR above 26,000...

Prioritizing improvements to truck driver vision.

DOT National Transportation Integrated Search

2006-03-01

This report presents the results of a three-part study of truck driver exterior vision and its safety consequences. In part one, : crash data are analyzed to document vision-related truck crash issues. About 20% of truck-initiated crashes occur in : ...

Truck Choice Modeling: Understanding California's Transition to Zero-Emission Vehicle Trucks Taking into Account Truck Technologies, Costs, and Fleet Decision Behavior

DOT National Transportation Integrated Search

2017-11-01

This report presents the results of a project to develop a truck vehicle/fuel decision choice model for California and to use that model to make initial projections of truck sales by technology out to 2050. The report also describes the linkage of th...

Truck and Transport Mechanic. Occupational Analyses Series.

ERIC Educational Resources Information Center

McRory, Aline; Ally, Mohamed

This analysis covers tasks performed by a truck and transport mechanic, an occupational title some provinces and territories of Canada have also identified as commercial transport vehicle mechanic; transport truck mechanic; truck and coach technician; and truck and transport service technician. A guide to analysis discusses development, structure,…

Road Traffic Related Injury Severity in Truck Drivers: A Prospective Medical and Technical Analysis of 582 Truck Crashes.

PubMed

Decker, Sebastian; Otte, Dietmar; Muller, Christian Walter; Omar, Mohamed; Krettek, Christian; Haasper, Carl; Brand, Stephan

2016-06-01

While cyclists and pedestrians are known to be at significant risk for severe injuries when exposed to road traffic accidents (RTA) involving trucks, little is known about RTA injury risk for truck drivers. The aim of this study was to analyze the injury severity in truck drivers following RTAs. Our local accident research unit prospectively documented 43000 RTAs involving 582 trucks between 2000 and 2011. Injury severity, including the abbreviated injury scale (AIS) and the maximum abbreviated injury scale (MAIS) were analyzed. Technical parameters (e.g. delta-v, direction of impact), the location of accident, and its dependency on the road type were also taken into consideration. Thirteen percent (77/582) of truck drivers were injured. Extremities were found to be at highest risk of injury with the lower extremities (36x) being injured most severely (10x: AIS 2 and 3). Death occurred only after collisions with other trucks, and severity of injuries increased with an increased speed limit. The maximum abbreviated injury scale was higher in the crash opponents (56x MAIS ≥ 3) compared to the truck drivers (8x MAIS ≥ 3). Overall, 82% of the crash opponents were injured. The safety of truck drivers is assured by their vehicles, the consequence being that the risk of becoming injured is likely to be low. However, the legs especially are at high risk for severe injuries during RTAs. This probability increases in the instance of a collision with another truck. Nevertheless, in RTAs involving trucks and regular passenger vehicles, the other party is in higher risk of injury.

Truckstop -- and Truck!-- Electrification

DOE Office of Scientific and Technical Information (OSTI.GOV)

Skip Yeakel

2001-12-13

The conclusions of this paper are: 0.5-1.5 G/H and/or BUSG/Y--how much time and money will it take to quantify and WHY BOTHER TO DO SO? No shortage of things to do re truckstop--+ truck!-- electrification; Better that government and industry should put many eggs in lots of baskets vs. all in one or few; Best concepts will surface as most viable; Economic appeal better than regulation or brute force; Launch Ground Freight Partnership and give it a chance to work; Demonstration is an effective means to educate, and learn from, customers--learning is a two way street; Research, Development, Demonstration, andmore » Deployment (RD 3) are all important but only deployment gets results; TSE can start small in numbers of spaces to accommodate economically inspired growth but upfront plans should be made for expansion if meaningful idle reduction is to follow via TE; 110VAC 15A service/ parking space is minimal--if infrastructure starts like this, upfront plans must be made to increase capacity; Increased electrification of truckstop and truck alike will result in much better life on the road; Improved sleep will improve driver alertness and safety; Reduced idling will significantly reduce fuel use and emissions; Universal appeal for DOD, DOE, DOT, EPA, OEMs, and users alike; Clean coal, gas, hydro, nuclear, or wind energy sources are all distinctly American means by which to generate electricity; Nothing can compete with diesel fuel to serve mobile truck needs; stationary trucks are like power plants--they don't move and should NOT be powered by petroleum products whenever possible; Use American fueled power plants--electricity--to serve truck idling needs wherever practical to do so; encourage economic aspect; Create and reward industry initiatives to reduce fuel use; Eliminate FET on new trucks, provide tax credits (non highway fuel use and investment), provide incentives based on results; Encourage newer/ cleaner truck use; solicit BAAs with mandatory OEM/ fleet

Impact of federal compliance reviews of trucking companies in reducing highway truck crashes.

PubMed

Chen, Guang Xiang

2008-01-01

The compliance review (CR) is a federal program monitoring motor carrier safety performance and regulatory compliance. This study sought to assess the impact of CRs on reviewed trucking companies in reducing truck crashes. Data was from the Motor Carrier Management Information System. Study subjects were trucking companies established during 1990-1995, had at least one truck, and remained active until April 2004. Truck crash data of these companies was examined from 1996 to 2003. The crash rates in 2003 and annual percentage changes in number of crashes were computed. Analyses were stratified by company size, organization, operation classification, and safety rating. Companies that received CRs had a higher crash rate than never-reviewed companies. Reviewed companies experienced a 39-15% reduction in number of crashes in the year the CR was performed. The reduction in crashes was observed in all reviewed companies regardless of company size, operation classification, type of organization, or safety rating. The reduction in crashes was sustained for at least 7 years after CRs. The study results were controlled for the year in which CRs were performed, crash trend, and CR selection bias. However, further studies, especially a randomized prospective longitudinal study, are needed to overcome the limitations that are associated with an observation study.

30 CFR 56.16016 - Lift trucks.

Code of Federal Regulations, 2011 CFR

2011-07-01

... 30 Mineral Resources 1 2011-07-01 2011-07-01 false Lift trucks. 56.16016 Section 56.16016 Mineral Resources MINE SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR METAL AND NONMETAL MINE SAFETY AND....16016 Lift trucks. Fork and other similar types of lift trucks shall be operated with the— (a) Upright...

30 CFR 57.16016 - Lift trucks.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 30 Mineral Resources 1 2010-07-01 2010-07-01 false Lift trucks. 57.16016 Section 57.16016 Mineral Resources MINE SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR METAL AND NONMETAL MINE SAFETY AND... § 57.16016 Lift trucks. Fork and other similar types of lift trucks shall be operated with the: (a...

30 CFR 56.16016 - Lift trucks.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 30 Mineral Resources 1 2010-07-01 2010-07-01 false Lift trucks. 56.16016 Section 56.16016 Mineral Resources MINE SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR METAL AND NONMETAL MINE SAFETY AND....16016 Lift trucks. Fork and other similar types of lift trucks shall be operated with the— (a) Upright...

30 CFR 57.16016 - Lift trucks.

Code of Federal Regulations, 2011 CFR

2011-07-01

... 30 Mineral Resources 1 2011-07-01 2011-07-01 false Lift trucks. 57.16016 Section 57.16016 Mineral Resources MINE SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR METAL AND NONMETAL MINE SAFETY AND... § 57.16016 Lift trucks. Fork and other similar types of lift trucks shall be operated with the: (a...

Health promotion in the trucking setting: Understanding Dutch truck drivers' road to healthy lifestyle changes.

PubMed

Boeijinga, Anniek; Hoeken, Hans; Sanders, José

2016-10-17

The working environment, the nature of the work, and the characteristics of truck drivers as a social group typically pose great challenges for the truck drivers' health and health promotion activities aiming to improve it. The purpose was to obtain a better understanding of (a) Dutch truck drivers' perceptions of health and lifestyle themes, and (b) the challenges they experience in their pursuit of a more healthy lifestyle, as a guiding framework for the development of health interventions targeting this occupational group. In this qualitative study, we conducted and analyzed 20 semi-structured interviews and seven cases of participant observations with Dutch truck drivers. Grounded theory was used to analyze the data. Our findings illustrate that Dutch truck drivers wish to improve their lifestyle but have unproductive associations with concepts of healthy living as well as a tendency to downplay their health risks. In addition, they experience barriers within their work and personal environment that prevent them from translating their intentions into actual lifestyle changes. Based on the insights derived from the interviews, we discuss recommendations for the development of more effective health promotion interventions for truck drivers.

Assessment of perceived injury risks and priorities among truck drivers and trucking companies in Washington State.

PubMed

Spielholz, Peregrin; Cullen, Jennifer; Smith, Caroline; Howard, Ninica; Silverstein, Barbara; Bonauto, David

2008-01-01

The trucking industry experiences one of the highest work-related injury rates. Little work has been conducted previously in the United States to assess the hazards, needs, and injury prevention priorities in trucking. Two separate industry-wide surveys of 359 trucking companies and 397 commercial truck drivers were conducted in Washington State. Trucking companies and drivers both ranked musculoskeletal and slip, trip, fall injuries as the top two priorities. Controlling heavy lifting, using appropriate equipment, and addressing slippery surfaces were frequently listed as solutions. There appears to be a gap in safety climate perception between workers and employers. However, driver and company priorities agreed with industry workers' compensation claims. There is room for safety program management improvement in the industry. The study findings detail opportunities for prioritizing and reducing injuries. This information can be used to focus and design interventions for the prevention of work-related injuries while improving industry competitiveness.

Developing high-resolution urban scale heavy-duty truck emission inventory using the data-driven truck activity model output

NASA Astrophysics Data System (ADS)

Perugu, Harikishan; Wei, Heng; Yao, Zhuo

2017-04-01

Air quality modelers often rely on regional travel demand models to estimate the vehicle activity data for emission models, however, most of the current travel demand models can only output reliable person travel activity rather than goods/service specific travel activity. This paper presents the successful application of data-driven, Spatial Regression and output optimization Truck model (SPARE-Truck) to develop truck-related activity inputs for the mobile emission model, and eventually to produce truck specific gridded emissions. To validate the proposed methodology, the Cincinnati metropolitan area in United States was selected as a case study site. From the results, it is found that the truck miles traveled predicted using traditional methods tend to underestimate - overall 32% less than proposed model- truck miles traveled. The coefficient of determination values for different truck types range between 0.82 and 0.97, except the motor homes which showed least model fit with 0.51. Consequently, the emission inventories calculated from the traditional methods were also underestimated i.e. -37% for NOx, -35% for SO2, -43% for VOC, -43% for BC, -47% for OC and - 49% for PM2.5. Further, the proposed method also predicted within ∼7% of the national emission inventory for all pollutants. The bottom-up gridding methodology used in this paper could allocate the emissions to grid cell where more truck activity is expected, and it is verified against regional land-use data. Most importantly, using proposed method it is easy to segregate gridded emission inventory by truck type, which is of particular interest for decision makers, since currently there is no reliable method to test different truck-category specific travel-demand management strategies for air pollution control.

Large truck crash facts 2005

DOT National Transportation Integrated Search

2007-02-01

This annual edition of Large Truck Crash Facts contains descriptive statistics about fatal, injury, and property damage only crashes involving large trucks in 2005. Selected crash statistics on passenger vehicles are also presented for comparison pur...

Dump truck-related deaths in construction, 1992-2007.

PubMed

McCann, Michael; Cheng, Mei-Tai

2012-05-01

Dump trucks are universally used in construction and other industries to haul materials to the location and to remove waste materials. The source for dump truck-related fatality data was the Bureau of Labor Statistics Census of Fatal Occupational Injuries (CFOI) Research File. From 1992 to 2007, 829 construction workers were killed in dump truck-related incidents nationwide. Of those, 336 were dump truck operators with 215 deaths occurring in street and highway incidents. Another 343 deaths involved workers on foot, three-quarters struck by dump trucks. Sixty-four of the construction workers killed were maintaining dump trucks, 22 when caught between the truck frame and a falling dump truck bed. Of the 86 other deaths, 55 involved streets and highways. Recommendations include: (i) improving the reporting of seat belt usage in fatality reports; (ii) requiring use of seat belts; (iii) requiring the use of backup alarms, spotters, or other methods to alert dump truck operators to workers in their blind spots; (iv) prohibiting direct dumping at river banks and embankments; (v) using cameras or radar to enforce stopping at railway crossings; and (xi) enforcing worker safety practices (e.g., lockout/tagout procedures on elevated dump truck beds). Copyright © 2011 Wiley Periodicals, Inc.

Striping truck utilization at Crawfordsville and Greenfield.

DOT National Transportation Integrated Search

2013-12-01

At the time this project was launched, INDOT was operating two paint trucks per district (one edge line truck and one center line truck). : This project was launched to determine the feasibility of painting all the lane miles in each district with a ...

Wisconsin large truck safety and enforcement study.

DOT National Transportation Integrated Search

2011-07-01

The Wisconsin Large Truck Safety and Enforcement Study (LTS&E) focused on a system-wide evaluation of large truck safety in the : state of Wisconsin. This study analyzes crash data related to large trucks that are close to the following criteria: gre...

Mitigating Wind Induced Truck Crashes

DOT National Transportation Integrated Search

2009-12-25

Dangerous weather and high wind in particular, is a common contributing factor in truck crashes. High wind speeds have been documented as a perennial cause of truck crashes in Kansas and other Great Plains states. The possibility of reducing such cra...

LANL Debuts Hybrid Garbage Truck

ScienceCinema

Witt, Monica

2018-01-16

Los Alamos National Laboratory has begun using a diesel-hydraulic hybrid garbage truck that could save up to 30 percent in operating costs and greenhouse emissions. The Peterbilt Model 320 takes energy from braking and uses it to help the truck accelerate after stops.

Productivity Trends in Intercity Trucking

ERIC Educational Resources Information Center

Carnes, Richard B.

1974-01-01

Productivity trends indicate intercity trucking productivity increased an average 2.7 percent a year, a fairly uniform increased productivity rate but substantially lower as compared to air carrier, railroad, and pipeline transportation. Factors affecting productivity are gradual introduction of technological innovation, larger capacity trucks,…

Identifying the potential of improved heavy truck crashworthiness to reduce death and injury for truck drivers.

DOT National Transportation Integrated Search

2015-07-01

Advanced crash avoidance technologies (ACATs) for trucks have been developed in recent years and are beginning : to be deployed. Prior to the development of standards for heavy truck crashworthiness and occupant protection, : additional characterizat...

Developing safety risk index for truck preferred arterial corridor.

DOT National Transportation Integrated Search

2013-06-01

Truck safety has been of great interest to transportation officials, engineers and researchers for many years because : of the amount of freight transported by trucks, the safety impact of trucks in traffic, and trucks invaluable : contribution to...

29 CFR 1917.43 - Powered industrial trucks.

Code of Federal Regulations, 2012 CFR

2012-07-01

... safety. (5) Powered industrial trucks shall be marked with their rated capacities, which shall be visible.... (5) Powered industrial trucks shall be maintained in safe working order. Safety devices shall not be... 29 Labor 7 2012-07-01 2012-07-01 false Powered industrial trucks. 1917.43 Section 1917.43 Labor...

29 CFR 1917.43 - Powered industrial trucks.

Code of Federal Regulations, 2014 CFR

2014-07-01

... safety. (5) Powered industrial trucks shall be marked with their rated capacities, which shall be visible.... (5) Powered industrial trucks shall be maintained in safe working order. Safety devices shall not be... 29 Labor 7 2014-07-01 2014-07-01 false Powered industrial trucks. 1917.43 Section 1917.43 Labor...

The effect of vibration exposure during haul truck operation on grip strength, touch sensation, and balance

PubMed Central

Pollard, Jonisha; Porter, William; Mayton, Alan; Xu, Xueyan; Weston, Eric

2017-01-01

Falls from mobile equipment are reported at surface mine quarry operations each year in considerable numbers. Research shows that a preponderance of falls occur while getting on/off mobile equipment. Contributing factors to the risk of falls include the usage of ladders, exiting onto a slippery surface, and foot or hand slippage. Balance issues may also contribute to fall risks for mobile equipment operators who are exposed to whole-body vibration (WBV). For this reason, the National Institute for Occupational Safety and Health, Office of Mine Safety and Health Research conducted a study at four participating mine sites with seven haul truck operators. The purpose was to ascertain whether WBV and hand-arm vibration (HAV) exposures for quarry haul truck operators were linked to short-term decreases in performance in relation to postural stability, touch sensation threshold, and grip strength that are of crucial importance when getting on/off the trucks. WBV measures of frequency-weighted RMS accelerations (wRMS) and vibration dose value (VDV), when compared to the ISO/ANSI standards, were mostly below levels identified for the Health Guidance Caution Zone (HGCZ), although there were instances where the levels were within and above the specified Exposure Action Value. Comparably, all mean HAV levels, when compared to the ISO/ANSI standards, were below the HGCZ. For the existing conditions and equipment, no significant correlation could be identified between the WBV, HAV, postural stability, touch sensation threshold, and grip strength measures taken during this study. PMID:28220051

Logging truck noise near nesting northern goshawks

Treesearch

Teryl G. Grubb; Larry L. Pater; David K. Delaney

1998-01-01

We measured noise levels of four logging trucks as the trucks passed within approximately 500 m of two active northern goshawk (Accipiter gentilis) nests on the Kaibab Plateau in northern Arizona in 1997. Neither a brooding adult female nor a lone juvenile exhibited any discernable behavioral response to logging truck noise, which peaked at 53.4 and...

North Carolina forecasts for truck traffic

DOT National Transportation Integrated Search

2006-07-01

North Carolina has experienced significant increases in truck traffic on many of its highways. Yet, current NCDOT : project-level highway traffic forecasts do not appropriately capture anticipated truck traffic growth. NCDOT : methods forecast total ...

Large truck crash profile : the 1998 national picture

DOT National Transportation Integrated Search

2000-01-01

This annual edition of the Large Truck Crash Profile contains descriptive statistics about fatal and non-fatal (injury and property-damage-only) large truck crashes that occurred in 1998. The profile includes only some of the major aspects of truck c...

Heavy truck casualty collisions, 1994-1998

DOT National Transportation Integrated Search

2001-12-01

This document reviews the number of collisions, vehicles involved, and casualties (fatalities and injuries) resulting from heavy truck collisions for each of straight trucks (greater than 4.536 kg) and tractor-trailers. The report also presents table...

Light Duty Truck Weight Reduction Evaluation

DOT National Transportation Integrated Search

1980-08-01

This contract covers the identification of Types, Makes and Models which constitute the Light Truck world fleet. The attributes which describe the critical functional aspects of trucks of this size are established and specifications to define the att...

Truck facility access design guidelines statewide.

DOT National Transportation Integrated Search

2011-06-01

The overall purpose of this project is to develop design guidelines for truck access to truck stop facilities adjoining interstate highways and accessed by interchanges in Louisiana. The specific objectives of the research are to: 1. Identify existin...

Naturalistic Study of Truck Following Behavior

DOT National Transportation Integrated Search

2016-04-01

Volpe conducted the Naturalistic study of truck following behavior to gain a better understanding of how trucks follow other vehicles in the real world, with the ultimate goal of supporting the Federal Highway Administration in the development of aut...

State Route 60 automated truck facility.

DOT National Transportation Integrated Search

2008-01-01

A research was conducted to evaluate a dedicated automated truck lane along a case study route 60 (Pomona : Freeway) to accommodate higher truck volume using AHS technologies and to estimate the associated costs of : such technologies. A cost analysi...

Heavy truck rollover characterization (phase B).

DOT National Transportation Integrated Search

2009-09-01

The Heavy Truck Rollover Characterization Study - Phase-B builds on the results of prior phases of research. Phases 1 and 2 (Funded by Federal Highway Administration) involved heavy truck rollover characterization for a tractor and box-trailer; and P...

Truck Terminal and Warehouse Survey Results

DOT National Transportation Integrated Search

1996-03-01

The survey of truck terminals and warehouses resulted in locating the highway bottlenecks for truck movements which are more localized in nature than the previous air, marine, and rail surveys performed by the NYMTC Central Staff. However, all of the...

Making truck-rail intermodal more competitive.

DOT National Transportation Integrated Search

2010-09-01

Truck-rail intermodal freight is a technique that can gain much of the benefit of truck service and rail efficiency. Despite the attraction of the mode : choice and its benefit in reducing emissions and highway congestion, the mode typically is used ...

Trusted Truck(R) II (phase A).

DOT National Transportation Integrated Search

2009-01-01

The Trusted Truck Program was initiated in 2003 as a joint effort by NTRCI, Volvo and UT. The vision of the Trusted Truck program is to develop a secure and "trusted" transport solution from pickup to delivery. The program's objective is to incre...

Diesel and Truck Certification Needs Assessment: Two Surveys.

ERIC Educational Resources Information Center

Broadbent, William A.

Recommendations for the improvement of the diesel engine and truck components of the Hawaii state certification examination for automobile and truck mechanics were solicited from 14 major private businesses repairing heavy tractor rigs and/or diesel engines on Oahu and a statewide sample of 21 trucking firms and other companies making extensive…

Grumman electric truck development

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kessler, J.C.; Ferdman, S.

1981-11-01

An electric truck development was undertaken to prepare for the markets of the 1980's. Grumman is using its aluminum truck bodies technology to create a light weight vehicle. A redesigned unitized, all aluminum body and a new propulsion system resulted in the desired vehicle. The vehicle meets the requirements of the US Postal Service and the DOE Demonstration program. The unitized chassisless structure is designed to take major driving loads. Design features and performance characteristics are enumerated. Safety and service considerations have been incorporated into the vehicle.

Ralphs Grocery EC-Diesel Truck Fleet: Final Results

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

2003-02-01

DOE's Office of Heavy Vehicle Technologies sponsored a research project with Ralphs Grocery Company to collect and analyze data on the performance and operation of 15 diesel trucks fueled with EC-Diesel in commercial service. These trucks were compared to 5 diesel trucks fueled with CARB diesel and operating on similar routes. This document reports this evaluation.

Weather impacts on single-vehicle truck crash injury severity.

PubMed

Naik, Bhaven; Tung, Li-Wei; Zhao, Shanshan; Khattak, Aemal J

2016-09-01

The focus of this paper is on illustrating the feasibility of aggregating data from disparate sources to investigate the relationship between single-vehicle truck crash injury severity and detailed weather conditions. Specifically, this paper presents: (a) a methodology that combines detailed 15-min weather station data with crash and roadway data, and (b) an empirical investigation of the effects of weather on crash-related injury severities of single-vehicle truck crashes. Random parameters ordinal and multinomial regression models were used to investigate crash injury severity under different weather conditions, taking into account the individual unobserved heterogeneity. The adopted methodology allowed consideration of environmental, roadway, and climate-related variables in single-vehicle truck crash injury severity. Results showed that wind speed, rain, humidity, and air temperature were linked with single-vehicle truck crash injury severity. Greater recorded wind speed added to the severity of injuries in single-vehicle truck crashes in general. Rain and warmer air temperatures were linked to more severe crash injuries in single-vehicle truck crashes while higher levels of humidity were linked to less severe injuries. Random parameters ordered logit and multinomial logit, respectively, revealed some individual heterogeneity in the data and showed that integrating comprehensive weather data with crash data provided useful insights into factors associated with single-vehicle truck crash injury severity. The research provided a practical method that combined comprehensive 15-min weather station data with crash and roadway data, thereby providing useful insights into crash injury severity of single-vehicle trucks. Those insights are useful for future truck driver educational programs and for truck safety in different weather conditions. Copyright © 2016 Elsevier Ltd and National Safety Council. All rights reserved.

FedEx Hybrid Electric Delivery Truck Testing | Transportation Research |

Science.gov Websites

hybridization. Hybrid Electric Straight Box Trucks In 2013, the team completed its six-month evaluation of six hybrid electric trucks and six conventional diesel trucks operated by FedEx Express in Ontario

Developing a GPS-based truck freight performance measure platform.

DOT National Transportation Integrated Search

2010-05-01

Although trucks move the largest volume and value of goods in urban areas, relatively little is known about their travel : patterns and how the roadway network performs for trucks. Global positioning systems (GPS) used by trucking : companies to mana...

The Weak Link HP-41C hand-held calculator program

Treesearch

Ross A. Phillips; Penn A. Peters; Gary D. Falk

1982-01-01

The Weak Link hand-held calculator program (HP-41C) quickly analyzes a system for logging production and costs. The production equations model conventional chain saw, skidder, loader, and tandemaxle truck operations in eastern mountain areas. Production of each function of the logging system may be determined so that the system may be balanced for minimum cost. The...

Trucks involved in fatal accidents factbook 2007.

DOT National Transportation Integrated Search

2010-01-01

This document presents aggregate statistics on trucks involved in traffic accidents in 2007. The : statistics are derived from the Trucks Involved in Fatal Accidents (TIFA) file, compiled by the : University of Michigan Transportation Research Instit...

Trucks involved in fatal accidents factbook 2008.

DOT National Transportation Integrated Search

2011-03-01

This document presents aggregate statistics on trucks involved in traffic accidents in 2008. The : statistics are derived from the Trucks Involved in Fatal Accidents (TIFA) file, compiled by the : University of Michigan Transportation Research Instit...

Truck Thermoacoustic Generator and Chiller

DOE Office of Scientific and Technical Information (OSTI.GOV)

Keolian, Robert

2011-03-31

This Final Report describes the accomplishments of the US Department of Energy (DOE) cooperative agreement project DE-FC26-04NT42113 - Truck Thermoacoustic Generator and Chiller - whose goal is to design, fabricate and test a thermoacoustic piezoelectric generator and chiller system for use on over-the-road heavy-duty-diesel trucks, driven alternatively by the waste heat of the main diesel engine exhaust or by a burner integrated into the thermoacoustic system. The thermoacoustic system would utilize engine exhaust waste heat to generate electricity and cab air conditioning, and would also function as an auxiliary power unit (APU) for idle reduction. The unit was to bemore » tested in Volvo engine performance and endurance test cells and then integrated onto a Class 8 over-the-road heavy-duty-diesel truck for further testing on the road. The project has been a collaboration of The Pennsylvania State University Applied Research Laboratory, Los Alamos National Laboratory, Clean Power Resources Inc., and Volvo Powertrain (Mack Trucks Inc.). Cost share funding was provided by Applied Research Laboratory, and by Clean Power Resources Inc via its grant from Innovation Works - funding that was derived from the Commonwealth of Pennsylvania. Los Alamos received its funding separately through DOE Field Work Proposal 04EE09.« less

Measurement of Whole-Body Vibration Exposure from Garbage Trucks

NASA Astrophysics Data System (ADS)

Maeda, S.; Morioka, M.

1998-08-01

Japanese garbage truck drivers are exposed to mechanical whole-body vibration during their work. Some drivers have suffered from low back pain from this vibration. However, there is no evidence of a relationship between the whole-body vibration from the garbage trucks and low back pain or occupational disease, due to the lack of investigations. A field study was conducted in order to characterize the health risks associated with garbage truck work. Three different types of truck were tested at different loadings and on different road surfaces, with the vibrations measured at the driver/seat interface (x,y, andz-axes). The vibrations were compared with the health risk guidance according to Annex B of ISO 2631-1 [1]. The findings of this study indicated that Japanese garbage truck drivers should not operate trucks for 2.5 h in a day, under current working conditions.

Glider kits cut truck costs

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

1984-02-01

Trucks used for the delivery of coal have a relatively limited life because they must be specified for somewhat less than brute strength in order to achieve maximum payload within existing weight and length limitations. The major drive train components such as engine, transmission, and drive axles can last longer if rebuilt or remanufactured periodically. For that reason glider kits and other truck components ready for the installation of the drive chain are becoming increasingly popular. These kits have been available for many years, but were regarded only as a means of salvaging late model wrecks or burned trucks. Theirmore » recent acceptance as a means of periodic fleet updating is built around the low cost and immediate availability of remanufactured major components. The cost advantages in using these glider kits are discussed.« less

75 FR 76518 - Volvo Trucks North America and Mack Trucks, Inc., Receipt of Petition for Decision of...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-12-08

... manufactured from March 1, 2007 through December 11, 2009. A total of 1,916 affected Volvo trucks were... trucks were manufactured from March 1, 2007, through December 11, 2009. A total 1,287 affected Mack... that their petition, to exempt them from providing recall notification of noncompliance as required by...

High efficiency trucks : new revenues, new jobs, and improved fuel economy in the medium and heavy truck fleet.

DOT National Transportation Integrated Search

2010-05-01

The move to high efficiency trucks can lead to new revenues and jobs for companies involved in the development and marketing of the technologies needed to make this transition. But in order for the medium and heavy truck industry to make this transit...

Large truck and bus crash facts, 2010.

DOT National Transportation Integrated Search

2012-09-01

This annual edition of Large Truck and Bus Crash Facts contains descriptive statistics about fatal, injury, and : property damage only crashes involving large trucks and buses in 2010. Selected crash statistics on passenger : vehicles are also presen...

Large truck and bus crash facts, 2007.

DOT National Transportation Integrated Search

2009-03-01

This annual edition of Large Truck and Bus Crash Facts contains descriptive statistics about fatal, injury, and : property damage only crashes involving large trucks and buses in 2007. Selected crash statistics on passenger : vehicles are also presen...

Large truck and bus crash facts, 2011.

DOT National Transportation Integrated Search

2013-10-01

This annual edition of Large Truck and Bus Crash Facts contains descriptive statistics about fatal, injury, and : property damage only crashes involving large trucks and buses in 2011. Selected crash statistics on passenger : vehicles are also presen...

Large truck and bus crash facts, 2013.

DOT National Transportation Integrated Search

2015-04-01

This annual edition of Large Truck and Bus Crash Facts contains descriptive statistics about fatal, injury, and property damage only crashes involving large trucks and buses in 2013. Selected crash statistics on passenger vehicles are also presented ...

Large truck and bus crash facts, 2009.

DOT National Transportation Integrated Search

2011-10-01

This annual edition of Large Truck and Bus Crash Facts contains descriptive statistics about fatal, injury, and : property damage only crashes involving large trucks and buses in 2009. Selected crash statistics on passenger : vehicles are also presen...

Large truck and bus crash facts, 2012.

DOT National Transportation Integrated Search

2014-06-01

This annual edition of Large Truck and Bus Crash Facts contains descriptive statistics about fatal, injury, and property damage only crashes involving large trucks and buses in 2012. Selected crash statistics on passenger vehicles are also presented ...

Design and Validation Testing of TruckScan to Assay Large Sacks of Fukushima Radioactive Debris on a Truck

DOE Office of Scientific and Technical Information (OSTI.GOV)

Suzuki, Atsuo; Bronson, Frazier

As a result of the March 2011 earthquake and resulting tsunami in Japan, there was a serious accident at the Fukushima Dai-ichi Nuclear Power Plant. This accident has contaminated soil and vegetation in a wide area around the plant. Decontamination projects over the last 4 years have resulted in large numbers of 1 cubic meter canvas bags of debris, commonly called Super Sacks [SS]. These are currently stored nearby where they were generated, but starting in 2015, they will be moved to various Interim Storage Facilities [ISF]. Trucks will typically carry 8-20 of these SSs. When the trucks arrive atmore » the ISF they need to be rapidly sorted into groups according to radioactivity level, for efficient subsequent processing. Canberra Industries, Inc. [CI] has designed a new truck monitoring system 'TruckScan' for use at these ISFs. The TruckScan system must measure the entire truck loaded with multiple closely packed SSs, and generate a nuclide specific assay report showing the radioactivity in each individual SS. The Canberra-Japan office, along with Obayashi Corporation have performed validation testing to demonstrate to the regulatory authorities that the proposed technique was sufficiently accurate. These validation tests were conducted at a temporary storage area in Fukushima prefecture. Decontaminated waste of various representative types and of various levels of radioactivity was gathered and mixed to create homogeneous volumes. These volumes were sampled multiple times and assayed with laboratory HPGe detectors to determine the reference concentration of each pile. Multiple SSs were loaded from each pile. Some of the SSs were filled 50% full, others 75% full, and others 100% full, to represent the typical loading configuration of the existing SSs in the field. The content of the SSs are either sand, soil, or vegetation with densities ranging from 0.3 g/cc - 1.6 g/cc. These SSs with known concentrations of Cs-134 and Cs-137 were then loaded onto trucks in a

Training Guidelines: Fork Lift Truck Driving.

ERIC Educational Resources Information Center

Ceramics, Glass, and Mineral Products Industry Training Board, Harrow (England).

This manual of operative training guidelines for fork lift truck driving has been developed by the Ceramics, Glass and Mineral Products Industry Training Board (Great Britain) in consultation with a number of firms which manufacture fork lift trucks or which already have training--programs for their use. The purpose of the guidelines is to assist…

Commercial truck parking and other safety issues.

DOT National Transportation Integrated Search

2015-10-01

Commercial truck parking is a safety issue, since trucks are involved in approximately 10% of all fatal accidents on interstates and : parkways in Kentucky. Drivers experience schedule demands and long hours on the road, yet they cannot easily determ...

Identification of methods for truck crash reduction

DOT National Transportation Integrated Search

1999-10-01

In South Dakota, trucks account for a higher percentage of fatalities than other vehicles, indicating when National transit database truck is involved in a crash, fatalities are more likely to occur. In this study, the Business Research Bureau review...

Papers on vehicle size : cars and trucks

DOT National Transportation Integrated Search

1988-06-01

The four papers in this volume describe analyses of car size : trends and truck occupant injuries and fatalities. All four were : written between June 1985 and December 1987. The topics : addressed include where heavy truck accidents occur, injury an...

A comparison of ground reaction force components according to the foothold heights in 16-t truck during downward step.

PubMed

Hyun, Seung-Hyun; Ryew, Che-Cheong

2017-12-01

The aim of this study is to compare and analyze the components of ground reaction force (GRF) relative to the foothold heights during downward step of 16-t truck. Adult males (n= 10) jumped downward from each 1st, 2nd, 3rd foothold step and driver's seat orderly using hand rail. Sampling rate of force components of 3 axis (medial-lateral [ML] GRF, anterior-posterior [AP] GRF, peak vertical force [PVF]), variables (COPx, COPy, COP area) of center of pressure (COP), loading rate, and stability index (ML, AP, vertical, and dynamic postural stability index [DPSI]) processed from GRF system was cut off at 1,000 Hz. and variables was processed with repeated one-way analysis of variance. AP GRF, PVF and loading rate showed higher value in case of not used hand rail than that used hand rail in all 1st, 2nd, and 3rd of foothold step. DPSI showed more lowered stability in order of 2nd, 3rd step than 1st foothold step used with hand rail, of which showed lowest stability from driver's seat. COPx, COPy, and COP area showed higher value in case of 2nd and 3rd than that of 1st of foothold step, and showed lowest stability from driver's seat. It is more desirable for cargo truck driver to utilize an available hand rail in order of 3rd, 2nd, and 1st of foothold step than downward stepping directly, thus by which may results in decrease of falling injuries and minimization of impulsive force transferring to muscular-skeletal system.

Trucks involved in fatal accidents codebook 2008.

DOT National Transportation Integrated Search

2011-01-01

This report provides documentation for UMTRIs file of Trucks Involved in Fatal Accidents : (TIFA), 2008, including distributions of the code values for each variable in the file. The 2008 : TIFA file is a census of all medium and heavy trucks invo...

Increasing the technical level of mining haul trucks

NASA Astrophysics Data System (ADS)

Voronov, Yuri; Voronov, Artyom; Grishin, Sergey; Bujankin, Alexey

2017-11-01

Theoretical and methodological fundamentals of mining haul trucks optimal design are articulated. Methods based on the systems approach to integrated assessment of truck technical level and methods for optimization of truck parameters depending on performance standards are provided. The results of using these methods are given. The developed method allows not only assessing the truck technical levels but also choosing the most promising models and providing quantitative evaluations of the decisions to be made at the design stage. These areas are closely connected with the problem of improvement in the industrial output quality, which, being a part of the widely spread in Western world "total quality control" ideology, is one of the major issues for the Russian economy.

49 CFR 238.219 - Truck-to-car-body attachment.

Code of Federal Regulations, 2011 CFR

2011-10-01

... 49 Transportation 4 2011-10-01 2011-10-01 false Truck-to-car-body attachment. 238.219 Section 238... I Passenger Equipment § 238.219 Truck-to-car-body attachment. Passenger equipment shall have a truck-to-car-body attachment with an ultimate strength sufficient to resist without failure the following...

49 CFR 238.219 - Truck-to-car-body attachment.

Code of Federal Regulations, 2012 CFR

2012-10-01

... 49 Transportation 4 2012-10-01 2012-10-01 false Truck-to-car-body attachment. 238.219 Section 238... I Passenger Equipment § 238.219 Truck-to-car-body attachment. Passenger equipment shall have a truck-to-car-body attachment with an ultimate strength sufficient to resist without failure the following...

49 CFR 238.219 - Truck-to-car-body attachment.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 49 Transportation 4 2010-10-01 2010-10-01 false Truck-to-car-body attachment. 238.219 Section 238... I Passenger Equipment § 238.219 Truck-to-car-body attachment. Passenger equipment shall have a truck-to-car-body attachment with an ultimate strength sufficient to resist without failure the following...

49 CFR 238.219 - Truck-to-car-body attachment.

Code of Federal Regulations, 2013 CFR

2013-10-01

... 49 Transportation 4 2013-10-01 2013-10-01 false Truck-to-car-body attachment. 238.219 Section 238... I Passenger Equipment § 238.219 Truck-to-car-body attachment. Passenger equipment shall have a truck-to-car-body attachment with an ultimate strength sufficient to resist without failure the following...

49 CFR 238.219 - Truck-to-car-body attachment.

Code of Federal Regulations, 2014 CFR

2014-10-01

... 49 Transportation 4 2014-10-01 2014-10-01 false Truck-to-car-body attachment. 238.219 Section 238... I Passenger Equipment § 238.219 Truck-to-car-body attachment. Passenger equipment shall have a truck-to-car-body attachment with an ultimate strength sufficient to resist without failure the following...

Alternative Fuels Data Center: Biodiesel Truck Transports Capitol Christmas

Science.gov Websites

Tree Biodiesel Truck Transports Capitol Christmas Tree to someone by E-mail Share Alternative Fuels Data Center: Biodiesel Truck Transports Capitol Christmas Tree on Facebook Tweet about Alternative Fuels Data Center: Biodiesel Truck Transports Capitol Christmas Tree on Twitter Bookmark Alternative

Research on mining truck vibration control based on particle damping

NASA Astrophysics Data System (ADS)

Liming, Song; Wangqiang, Xiao; Zeguang, Li; Haiquan, Guo; Zhe, Yang

2018-03-01

More and more attentions were got by people about the research on mining truck driving comfort. As the vibration transfer terminal, cab is one of the important part of mining truck vibration control. In this paper, based on particle damping technology and its application characteristics, through the discrete element modeling, DEM & FEM coupling simulation and analysis, lab test verification and actual test in the truck, particle damping technology was successfully used in driver’s seat base of mining truck, cab vibration was reduced obviously, meanwhile applied research and method of particle damping technology in mining truck vibration control were provided.

Miami-Dade County Hydraulic Hybrid Refuse Truck Testing | Transportation

Science.gov Websites

Research | NREL Miami-Dade County Hydraulic Hybrid Refuse Truck Evaluation Miami-Dade County Hydraulic Hybrid Refuse Truck Evaluation Photo of garbage truck with view of lake and city in background. As hydraulic hybrid refuse vehicles, with 29 more on order. Photo courtesy of Parker Hannifin NREL is

Measurement of Workability of Fresh Concrete Using a Mixing Truck

PubMed Central

Amziane, Sofiane; Ferraris, Chiara F.; Koehler, Eric P.

2005-01-01

The main objective of this study is to evaluate the workability of fresh portland cement concrete while it is still in the mixing truck by determining fundamental rheological parameters (plastic viscosity and yield stress). Nine concrete mixtures with different values of yield stress and plastic viscosity were tested in a concrete truck. The measurements made with the truck were based on the typical method of determining the flow behavior in a traditional fluid rheometer; that is, the shear rate in the mixing truck was swept from high to low by varying the rotation speed of the drum. The results of these experiments are discussed and compared with data provided by the ICAR rheometer, a portable rheometer designed for measuring concrete rheology. The test results indicate that the mixing truck equipment is sufficiently sensitive to detect differences in yield stress, slump, and plastic viscosity. However, the plastic viscosity determined by the truck measurement did not correlate with plastic viscosity as measured by the ICAR rheometer, while the yield stress determined by the truck measurement did correlate well with the measured slump and the ICAR rheometer results Suggestions are given on how to improve the mixing truck for better use as a rheometer. PMID:27308103

Truck monitoring and warning systems for freeway-to-freeway connections

DOT National Transportation Integrated Search

1999-10-01

This research focuses on the development and evaluation of a truck monitoring and warning (TM&W) system for detecting high, long, fast trucks at freeway-to-freeway connections and activating displays to warn the truck drivers of potential hazards as ...

Analysis of risk factors in severity of rural truck crashes.

DOT National Transportation Integrated Search

2016-04-01

Trucks are a vital part of the logistics system in North Dakota. Recent energy developments have : generated exponential growth in the demand for truck services. With increased density of trucks in the : traffic mix, it is reasonable to expect some i...

Stennis acquires new ladder truck

NASA Image and Video Library

2009-10-20

The Stennis Space Center Fire Department added to its fire-fighting capabilities with acquisition of a new emergency response vehicle, Ladder-1, for use on-site. The E-One HP78 Aerial Truck is a combination aerial ladder and fire suppression unit and is designed with the latest safety technology. Featuring a 78-foot ladder and a pumping capability of 1,500 gallons per minute, the new truck provides firefighters with a tremendous rescue and fire suppression tool, Stennis Fire Chief Clark Smith said.

Potential benefits of underride guards in large truck side crashes.

PubMed

Brumbelow, Matthew L

2012-01-01

To evaluate the maximum potential for side underride guards (SUGs) to reduce passenger vehicle occupant fatalities and injuries in crashes with large trucks in the United States. Examination of the Large Truck Crash Causation Study (LTCCS) identified 206 crash events involving a passenger vehicle impact with the side of a large truck. Each case was evaluated to determine whether the most severe injury sustained by a passenger vehicle occupant was a result of the impact with the side of the truck and whether an SUG could have reduced the injury severity. Data from the 2006-2008 Fatality Analysis Reporting System (FARS) and Trucks Involved in Fatal Accidents (TIFA) survey were used to compare the types of trucks involved in all fatal side impacts with passenger vehicles with the truck types in the LTCCS cases that were studied. FARS and TIFA data also were used to estimate the total annual number of passenger vehicle occupants killed in truck side impacts. In 143 of the 206 cases, the truck side impact produced the most severe injury sustained by a passenger vehicle occupant. In the other cases, no passenger vehicle occupant was injured or the most severe injury was due to an event preceding or following the truck side impact. Forty-nine of these occupants sustained injuries coded as level 3 or higher on the abbreviated injury scale (AIS) or were killed. SUGs could have reduced injury severity in 76 of the 143 cases, including 38 of the 49 cases with an AIS ≥ 3 coded injury or fatality. Semi-trailers were the most common type of impacted truck unit, both overall and when considering only cases where an SUG could have mitigated injury severity. Crashes where the front of the passenger vehicle struck the side of the semi-trailer perpendicularly or obliquely from the oncoming direction were less common overall than side-to-side and oblique/same direction crashes but more often produced an AIS ≥ 3 injury or fatality. The distribution of truck types in the LTCCS

49 CFR 230.108 - Steam locomotive leading and trailing trucks.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 49 Transportation 4 2010-10-01 2010-10-01 false Steam locomotive leading and trailing trucks. 230.108 Section 230.108 Transportation Other Regulations Relating to Transportation (Continued) FEDERAL... and trailing trucks. (a) Maintenance. Trucks shall be maintained in safe and suitable condition for...

Truck acoustic data analyzer system

DOEpatents

Haynes, Howard D.; Akerman, Alfred; Ayers, Curtis W.

2006-07-04

A passive vehicle acoustic data analyzer system having at least one microphone disposed in the acoustic field of a moving vehicle and a computer in electronic communication the microphone(s). The computer detects and measures the frequency shift in the acoustic signature emitted by the vehicle as it approaches and passes the microphone(s). The acoustic signature of a truck driving by a microphone can provide enough information to estimate the truck speed in miles-per-hour (mph), engine speed in rotations-per-minute (RPM), turbocharger speed in RPM, and vehicle weight.

The unsafe driving acts of motorists in the vicinity of large trucks

DOT National Transportation Integrated Search

1999-11-01

In 1996 large trucks composed 8% of all vehicles involved in fatal crashes; however, truck-involved crashes resulted in 12% of the total fatalities. Occupants of large trucks compose only 14% of the fatalities resulting from fatal truck crashes; 86% ...

Costs of large truck- and bus-involved crashes.

DOT National Transportation Integrated Search

2000-12-01

This study provides comprehensive, economically sophisticated estimates of the costs of highway crashes involving large trucks and buses by severity. Based on the latest data available, the estimated cost of police-reported crashes involving trucks w...

Large truck and bus crash facts, 2008. 

DOT National Transportation Integrated Search

2010-03-01

This annual edition of Large Truck and Bus Crash Facts contains descriptive statistics about fatal, injury, and : property damage only crashes involving large trucks and buses in 2008. Selected crash statistics on passenger : vehicles are also presen...

Development of Diesel Engine Operated Forklift Truck for Explosive Gas Atmospheres

NASA Astrophysics Data System (ADS)

Vishwakarma, Rajendra Kumar; Singh, Arvind Kumar; Ahirwal, Bhagirath; Sinha, Amalendu

2018-02-01

For the present study, a prototype diesel engine operated Forklift truck of 2 t capacity is developed for explosive gas atmosphere. The parts of the Forklift truck are assessed against risk of ignition of the explosive gases, vapors or mist grouped in Gr. IIA and having ignition temperature more than 200°C. Identification of possible sources of ignition and their control or prevention is the main objective of this work. The design transformation of a standard Forklift truck into a special Forklift truck is made on prototype basis. The safety parameters of the improved Forklift truck are discussed in this paper. The specially designed Forklift truck is useful in industries where explosive atmospheres may present during normal working conditions and risk of explosion is a concern during handling or transportation of materials. This indigenous diesel engine based Forklift truck for explosive gas atmosphere classified as Zone 1 and Zone 2 area and gas group IIA is developed first time in India in association with the Industry.

Long-haul truck drivers want healthful meal options at truck-stop restaurants.

PubMed

Whitfield Jacobson, Pamela J; Prawitz, Aimee D; Lukaszuk, Judith M

2007-12-01

Long-haul truckers are confined, by parking regulations and other constraints, to dining at truck-stop restaurants. Objectives were to (a) compare truckers' anthropometrics with recommended guidelines; and (b) assess eating/exercise habits, importance of healthful food choices, and attitudes about restaurants' provision of healthful options. Hypotheses were: (a) overweight/obese drivers will place less importance on healthful food choices than will drivers of optimal weight; (b) importance of healthful food choices and attitudes about their provision will be positively correlated. Questionnaires included Food Choices Index, Nutrition Attitude Survey, and demographic information; bioelectrical impedance assessed weight, body fat, and body mass index. Subjects (n=92) were truckers at a Midwestern truck-stop restaurant; 79 were overweight, 52 were obese. Mean rating of importance of healthful choices was above average. There was no difference in importance of healthful food choices for overweight/obese and optimal weight drivers, t(89)=-1.312; P=0.19. Drivers placing more importance on healthful food choices had more positive attitudes about restaurants' provision of such options, r(90)=0.74, P<0.001. Overall, drivers indicated they would choose healthful foods if available and appetizing. Registered dietitian-directed wellness programs that include education, support, and cooperation of truck-stop restaurants are critical to reduce obesity and risk of disease in this population.

Driver exposure to combustion particles in the U.S. Trucking industry.

PubMed

Davis, M E; Smith, T J; Laden, F; Hart, J E; Blicharz, A P; Reaser, P; Garshick, E

2007-11-01

A large study of combustion particle exposures for drivers of diesel-powered trucks was conducted in collaboration with an epidemiologic study of lung cancer outcomes for workers in the trucking industry. Three components of diesel exhaust combustion particles (PM(2.5), elemental carbon, and organic carbon) were measured inside the driver cabs of diesel-powered trucks from 36 different trucking terminals across the United States between 2001 and 2005. In-cab particle exposures for drivers assigned to both short and long distance trips were observed, as well as information on the smoking status of the driver, truck characteristics such as age and model, and weather conditions during the sampling session. This article summarizes these findings and describes the relationship between exhaust particles and various determinants of exposure. The results suggest that in-cab particle exposures are positively related to smoking, ambient particle concentrations, truck age, and open windows, with other significant modifying factors such as weather. This study represents the largest and most comprehensive exposure assessment of drivers in the trucking industry, encompassing a 4-year period of observations on diesel and exhaust particle exposures nationwide. The results are relevant not only to the occupational group of truck drivers being examined but also to the general population that live, commute, or work within proximity to diesel-fueled traffic or trucking terminals.

29 CFR 1917.43 - Powered industrial trucks.

Code of Federal Regulations, 2011 CFR

2011-07-01

... engagement hidden from the operator, a means shall be provided to enable the operator to determine that the... employees. Employees may be elevated by fork lift trucks only when a platform is secured to the lifting...) if tools or other objects could fall on employees below. (iii) An employee shall be at the truck's...

29 CFR 1917.43 - Powered industrial trucks.

Code of Federal Regulations, 2010 CFR

2010-07-01

... engagement hidden from the operator, a means shall be provided to enable the operator to determine that the... employees. Employees may be elevated by fork lift trucks only when a platform is secured to the lifting...) if tools or other objects could fall on employees below. (iii) An employee shall be at the truck's...

Engineering Data on Selected High Speed Passenger Trucks

DOT National Transportation Integrated Search

1978-07-01

The purpose of this project is to compile a list of high speed truck engineering parameters for characterization in dynamic performance modeling activities. Data tabulations are supplied for trucks from France, Germany, Italy, England, Japan, U.S.S.R...

49 CFR 230.98 - Driving, trailing, and engine truck axles.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 49 Transportation 4 2010-10-01 2010-10-01 false Driving, trailing, and engine truck axles. 230.98... Locomotives and Tenders Running Gear § 230.98 Driving, trailing, and engine truck axles. (a) Condemning defects. Driving, trailing, and engine truck axles with any of the following defects shall be removed from...

49 CFR 230.98 - Driving, trailing, and engine truck axles.

Code of Federal Regulations, 2011 CFR

2011-10-01

... Locomotives and Tenders Running Gear § 230.98 Driving, trailing, and engine truck axles. (a) Condemning defects. Driving, trailing, and engine truck axles with any of the following defects shall be removed from... 49 Transportation 4 2011-10-01 2011-10-01 false Driving, trailing, and engine truck axles. 230.98...

Work Truck Idling Reduction

DOE Office of Scientific and Technical Information (OSTI.GOV)

None

2017-03-01

Hybrid utility trucks, with auxiliary power sources for on-board equipment, significantly reduce unnecessary idling resulting in fuel costs savings, less engine wear, and reduction in noise and emissions.

Truck Transportation of Hazardous Materials - A National Overview

DOT National Transportation Integrated Search

1987-12-01

The primary objective of the effort has been to provide Government regulators and policy-makers with (a) an estimate of the aggregate national volume of hazardous chemical and petroleum products transportation in trucks, (b) a profile of the truck fl...

Unit costs of medium and heavy truck crashes.

DOT National Transportation Integrated Search

2008-03-01

This study provides the latest estimates of unit costs for highway crashes involving medium/heavy trucks by severity. Based on the latest data available, the estimated cost of police-reported crashes involving trucks with a gross weight rating of mor...

Commercial truck platooning - level 2 automation : project summary.

DOT National Transportation Integrated Search

2016-08-31

Besides driver compensation, the largest : operating expense for a line-haul truck is the : cost of fuel. At 65 mph, each truck expends about : 65 percent of its fuel consumption to overcome : the effects of aerodynamic drag. Many of the : large and ...

27 CFR 24.229 - Tank car and tank truck requirements.

Code of Federal Regulations, 2014 CFR

2014-04-01

... 27 Alcohol, Tobacco Products and Firearms 1 2014-04-01 2014-04-01 false Tank car and tank truck... BUREAU, DEPARTMENT OF THE TREASURY ALCOHOL WINE Spirits § 24.229 Tank car and tank truck requirements. Railroad tank cars and tank trucks used to transport spirits for use in wine production will be constructed...

27 CFR 24.229 - Tank car and tank truck requirements.

Code of Federal Regulations, 2012 CFR

2012-04-01

... 27 Alcohol, Tobacco Products and Firearms 1 2012-04-01 2012-04-01 false Tank car and tank truck... BUREAU, DEPARTMENT OF THE TREASURY LIQUORS WINE Spirits § 24.229 Tank car and tank truck requirements. Railroad tank cars and tank trucks used to transport spirits for use in wine production will be constructed...

27 CFR 24.229 - Tank car and tank truck requirements.

Code of Federal Regulations, 2010 CFR

2010-04-01

... 27 Alcohol, Tobacco Products and Firearms 1 2010-04-01 2010-04-01 false Tank car and tank truck... BUREAU, DEPARTMENT OF THE TREASURY LIQUORS WINE Spirits § 24.229 Tank car and tank truck requirements. Railroad tank cars and tank trucks used to transport spirits for use in wine production will be constructed...

27 CFR 24.229 - Tank car and tank truck requirements.

Code of Federal Regulations, 2013 CFR

2013-04-01

... 27 Alcohol, Tobacco Products and Firearms 1 2013-04-01 2013-04-01 false Tank car and tank truck... BUREAU, DEPARTMENT OF THE TREASURY ALCOHOL WINE Spirits § 24.229 Tank car and tank truck requirements. Railroad tank cars and tank trucks used to transport spirits for use in wine production will be constructed...

27 CFR 24.229 - Tank car and tank truck requirements.

Code of Federal Regulations, 2011 CFR

2011-04-01

... 27 Alcohol, Tobacco Products and Firearms 1 2011-04-01 2011-04-01 false Tank car and tank truck... BUREAU, DEPARTMENT OF THE TREASURY LIQUORS WINE Spirits § 24.229 Tank car and tank truck requirements. Railroad tank cars and tank trucks used to transport spirits for use in wine production will be constructed...

U.S. truck driver anthropometric study and multivariate anthropometric models for cab designs.

PubMed

Guan, Jinhua; Hsiao, Hongwei; Bradtmiller, Bruce; Kau, Tsui-Ying; Reed, Matthew R; Jahns, Steven K; Loczi, Josef; Hardee, H Lenora; Piamonte, Dominic Paul T

2012-10-01

This study presents data from a large-scale anthropometric study of U.S. truck drivers and the multivariate anthropometric models developed for the design of next-generation truck cabs. Up-to-date anthropometric information of the U.S. truck driver population is needed for the design of safe and ergonomically efficient truck cabs. We collected 35 anthropometric dimensions for 1,950 truck drivers (1,779 males and 171 females) across the continental United States using a sampling plan designed to capture the appropriate ethnic, gender, and age distributions of the truck driver population. Truck drivers are heavier than the U.S.general population, with a difference in mean body weight of 13.5 kg for males and 15.4 kg for females. They are also different in physique from the U.S. general population. In addition, the current truck drivers are heavier and different in physique compared to their counterparts of 25 to 30 years ago. The data obtained in this study provide more accurate anthropometric information for cab designs than do the current U.S. general population data or truck driver data collected 25 to 30 years ago. Multivariate anthropometric models, spanning 95% of the current truck driver population on the basis of a set of 12 anthropometric measurements, have been developed to facilitate future cab designs. The up-to-date truck driver anthropometric data and multivariate anthropometric models will benefit the design of future truck cabs which, in turn, will help promote the safety and health of the U.S. truck drivers.

Alternative Fuels Data Center: Truck Stop Electrification for Heavy-Duty

Science.gov Websites

-board equipment so trucks can plug into electrical outlets at the truck stop. To use dual-system electrification, trucks must be equipped with AC equipment or an inverter to convert 120-volt power, electrical equipment, and hardware to plug in to the electrical outlet. Necessary electrical equipment might include an

Effects of geometric characteristics of interchanges on truck safety

DOT National Transportation Integrated Search

1999-01-18

Relationships between truck accidents and selected geometric characteristics of interchanges are examined. Datasets containing information on truck accident at interchanges, traffic exposure and selected geometric characteristics are analyzed with an...

Study of Technological Improvements to Optimize Truck Configurations for Fuel Economy

DOT National Transportation Integrated Search

1975-09-01

The truck types that accounted for most of the fuel consumed were identified and modeled by computer analysis. Baseline fuel consumption was calculated for the major truck types over specific duty cycles. Design improvements in the truck were then mo...

Truck monitoring and warning systems for freeway-to-freeway connections : summary

DOT National Transportation Integrated Search

1999-10-01

This project focuses on the development and evaluation of a truck monitoring and warning (TM&W) system for detecting high, long, fast trucks at freeway-to-freeway connections and activating displays to warn the truck drivers of potential hazards as t...

Truck travel characteristics as an indicator of system condition and performance.

DOT National Transportation Integrated Search

2011-07-01

The effect of trucks on the level of service is determined by considering passenger car equivalents (PCE) of trucks. The : Highway Capacity Manual (HCM) uses a single PCE value for all tucks combined. However, the composition of truck traffic : varie...

Assessing crash risk considering vehicle interactions with trucks using point detector data.

PubMed

Hyun, Kyung Kate; Jeong, Kyungsoo; Tok, Andre; Ritchie, Stephen G

2018-03-12

Trucks have distinct driving characteristics in general traffic streams such as lower speeds and limitations in acceleration and deceleration. As a consequence, vehicles keep longer headways or frequently change lane when they follow a truck, which is expected to increase crash risk. This study introduces several traffic measures at the individual vehicle level to capture vehicle interactions between trucks and non-trucks and analyzed how the measures affect crash risk under different traffic conditions. The traffic measures were developed using headways obtained from Inductive Loop Detectors (ILDs). In addition, a truck detection algorithm using a Gaussian Mixture (GM) model was developed to identify trucks and to estimate truck exposure from ILD data. Using the identified vehicle types from the GM model, vehicle interaction metrics were categorized into three groups based on the combination of leading and following vehicle types. The effects of the proposed traffic measures on crash risk were modeled in two different cases of prior- and non-crash using a case-control approach utilizing a conditional logistic regression. Results showed that the vehicle interactions between the leading and following vehicle types were highly associated with crash risk, and further showed different impacts on crash risk by traffic conditions. Specifically, crashes were more likely to occur when a truck following a non-truck had shorter average headway but greater headway variance in heavy traffic while a non-truck following a truck had greater headway variance in light traffic. This study obtained meaningful conclusions that vehicle interactions involved with trucks were significantly related to the crash likelihood rather than the measures that estimate average traffic condition such as total volume or average headway of the traffic stream. Copyright © 2018 Elsevier Ltd. All rights reserved.

Electric urban delivery trucks: energy use, greenhouse gas emissions, and cost-effectiveness.

PubMed

Lee, Dong-Yeon; Thomas, Valerie M; Brown, Marilyn A

2013-07-16

We compare electric and diesel urban delivery trucks in terms of life-cycle energy consumption, greenhouse gas (GHG) emissions, and total cost of ownership (TCO). The relative benefits of electric trucks depend heavily on vehicle efficiency associated with drive cycle, diesel fuel price, travel demand, electric drive battery replacement and price, electricity generation and transmission efficiency, electric truck recharging infrastructure, and purchase price. For a drive cycle with frequent stops and low average speed such as the New York City Cycle (NYCC), electric trucks emit 42-61% less GHGs and consume 32-54% less energy than diesel trucks, depending upon vehicle efficiency cases. Over an array of possible conditions, the median TCO of electric trucks is 22% less than that of diesel trucks on the NYCC. For a drive cycle with less frequent stops and high average speed such as the City-Suburban Heavy Vehicle Cycle (CSHVC), electric trucks emit 19-43% less GHGs and consume 5-34% less energy, but cost 1% more than diesel counterparts. Considering current and projected U.S. regional electricity generation mixes, for the baseline case, the energy use and GHG emissions ratios of electric to diesel trucks range from 48 to 82% and 25 to 89%, respectively.

Driver-related factors in crashes between large trucks and passenger vehicles

DOT National Transportation Integrated Search

1999-04-01

Large trucks are involved in close to 400,000 police-reported crashes each year, of which 4,500 involve a fatality. About 60% of fatal truck crashes involve one large truck colliding with a single passenger vehicle. Prevention of these crashes requir...

Exploring Fuel-Saving Potential of Long-Haul Truck Hybridization

DOE Office of Scientific and Technical Information (OSTI.GOV)

Gao, Zhiming; LaClair, Tim J.; Smith, David E.

We report our comparisons on the simulated fuel economy for parallel, series, and dual-mode hybrid electric long-haul trucks, in addition to a conventional powertrain configuration, powered by a commercial 2010-compliant 15-L diesel engine over a freeway-dominated heavy-duty truck driving cycle. The driving cycle was obtained by measurement during normal driving conditions. The results indicated that both parallel and dual-mode hybrid powertrains were capable of improving fuel economy by 7% to 8%. But there was no significant fuel economy benefit for the series hybrid truck because of internal inefficiencies in energy exchange. When reduced aerodynamic drag and tire rolling resistance weremore » combined with hybridization, there was a synergistic fuel economy benefit for appropriate hybrids that increased the fuel economy benefit to more than 15%. Long-haul hybrid trucks with reduced aerodynamic drag and rolling resistance offered lower peak engine loads, better kinetic energy recovery, and reduced average engine power demand. Therefore, it is expected that hybridization with load reduction technologies offers important potential fuel energy savings for future long-haul trucks.« less

Exploring Fuel-Saving Potential of Long-Haul Truck Hybridization

DOE PAGES

Gao, Zhiming; LaClair, Tim J.; Smith, David E.; ...

2015-10-01

We report our comparisons on the simulated fuel economy for parallel, series, and dual-mode hybrid electric long-haul trucks, in addition to a conventional powertrain configuration, powered by a commercial 2010-compliant 15-L diesel engine over a freeway-dominated heavy-duty truck driving cycle. The driving cycle was obtained by measurement during normal driving conditions. The results indicated that both parallel and dual-mode hybrid powertrains were capable of improving fuel economy by 7% to 8%. But there was no significant fuel economy benefit for the series hybrid truck because of internal inefficiencies in energy exchange. When reduced aerodynamic drag and tire rolling resistance weremore » combined with hybridization, there was a synergistic fuel economy benefit for appropriate hybrids that increased the fuel economy benefit to more than 15%. Long-haul hybrid trucks with reduced aerodynamic drag and rolling resistance offered lower peak engine loads, better kinetic energy recovery, and reduced average engine power demand. Therefore, it is expected that hybridization with load reduction technologies offers important potential fuel energy savings for future long-haul trucks.« less

Truck Drivers' Use of the Internet: A Mobile Health Lifeline.

PubMed

Heaton, Karen; Combs, Bryan; Griffin, Russell

2017-06-01

Because of their social isolation, irregular and unpredictable schedules, limited access to health care, and long periods of travel, long-haul truckers may benefit from the use of mobile health applications on Internet-capable devices. The purpose of this study was to determine Internet access and usage among a sample of long-haul truck drivers. In this cross-sectional study, truck drivers completed a pencil and paper survey with questions on demographics, work and health histories, and Internet access and usage for both personal and job reasons. A total of 106 truck drivers were recruited from trucking industry trade shows, by word of mouth, and directly from trucking companies. Overall, the truck drivers' use of the Internet was limited. Their usage for personal and job-related reasons differed. Social connectivity and access to health and wellness information were important during personal usage time. Job-related Internet use was highly practical, and applied to seeking information for directions and maps, fuel stops and pricing, and communicating with employers or transmitting documents. Age and experience were associated with Internet use. Younger, less-experienced drivers used the Internet more than older, experienced drivers. Targeted mobile health messaging may be a useful tool to inform truck drivers of health conditions and plans, and may provide links to primary care providers needing to monitor or notify drivers of diagnostic results or treatment plans.

Alternative Fuels Data Center: Kentucky Trucking Company Adds CNG Vehicles

Science.gov Websites

run on compressed natural gas (CNG) in Lousiville, Kentucky. Download QuickTime Video QuickTime (.mov California Nov. 18, 2017 Photo of a car Smart Car Shopping Nov. 4, 2017 Photo of a truck Natural Gas Vehicles truck Idaho Transports Mail and Reduces Emissions with Natural Gas Trucks June 23, 2017 Photo of a

The Causes of Logging Truck Delays on Two West Virginia Logging Operations

Treesearch

John E. Baumgras

1978-01-01

Logging truck downtime increases timber harvesting costs. To determine the extent and causes of truck delays, four logging trucks on two separate operations were monitored for a 7-month period by recording speedometers and with tallies of delay causes. The results show the number of truck delays per shift, their duration, and the total delay time per shift for eight...

49 CFR 215.119 - Defective freight car truck.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 49 Transportation 4 2010-10-01 2010-10-01 false Defective freight car truck. 215.119 Section 215... ADMINISTRATION, DEPARTMENT OF TRANSPORTATION RAILROAD FREIGHT CAR SAFETY STANDARDS Freight Car Components Suspension System § 215.119 Defective freight car truck. A railroad may not place or continue in service a...

49 CFR 215.119 - Defective freight car truck.

Code of Federal Regulations, 2013 CFR

2013-10-01

... 49 Transportation 4 2013-10-01 2013-10-01 false Defective freight car truck. 215.119 Section 215... ADMINISTRATION, DEPARTMENT OF TRANSPORTATION RAILROAD FREIGHT CAR SAFETY STANDARDS Freight Car Components Suspension System § 215.119 Defective freight car truck. A railroad may not place or continue in service a...

49 CFR 215.119 - Defective freight car truck.

Code of Federal Regulations, 2012 CFR

2012-10-01

... 49 Transportation 4 2012-10-01 2012-10-01 false Defective freight car truck. 215.119 Section 215... ADMINISTRATION, DEPARTMENT OF TRANSPORTATION RAILROAD FREIGHT CAR SAFETY STANDARDS Freight Car Components Suspension System § 215.119 Defective freight car truck. A railroad may not place or continue in service a...

49 CFR 215.119 - Defective freight car truck.

Code of Federal Regulations, 2014 CFR

2014-10-01

... 49 Transportation 4 2014-10-01 2014-10-01 false Defective freight car truck. 215.119 Section 215... ADMINISTRATION, DEPARTMENT OF TRANSPORTATION RAILROAD FREIGHT CAR SAFETY STANDARDS Freight Car Components Suspension System § 215.119 Defective freight car truck. A railroad may not place or continue in service a...

49 CFR 215.119 - Defective freight car truck.

Code of Federal Regulations, 2011 CFR

2011-10-01

... 49 Transportation 4 2011-10-01 2011-10-01 false Defective freight car truck. 215.119 Section 215... ADMINISTRATION, DEPARTMENT OF TRANSPORTATION RAILROAD FREIGHT CAR SAFETY STANDARDS Freight Car Components Suspension System § 215.119 Defective freight car truck. A railroad may not place or continue in service a...

Crash risk factors for interstate large trucks in North Carolina.

PubMed

Teoh, Eric R; Carter, Daniel L; Smith, Sarah; McCartt, Anne T

2017-09-01

Provide an updated examination of risk factors for large truck involvements in crashes resulting in injury or death. A matched case-control study was conducted in North Carolina of large trucks operated by interstate carriers. Cases were defined as trucks involved in crashes resulting in fatal or non-fatal injury, and one control truck was matched on the basis of location, weekday, time of day, and truck type. The matched-pair odds ratio provided an estimate of the effect of various driver, vehicle, or carrier factors. Out-of-service (OOS) brake violations tripled the risk of crashing; any OOS vehicle defect increased crash risk by 362%. Higher historical crash rates (fatal, injury, or all crashes) of the carrier were associated with increased risk of crashing. Operating on a short-haul exemption increased crash risk by 383%. Antilock braking systems reduced crash risk by 65%. All of these results were statistically significant at the 95% confidence level. Other safety technologies also showed estimated benefits, although not statistically significant. With the exception of the finding that short-haul exemption is associated with increased crash risk, results largely bolster what is currently known about large truck crash risk and reinforce current enforcement practices. Results also suggest vehicle safety technologies can be important in lowering crash risk. This means that as safety technology continues to penetrate the fleet, whether from voluntary usage or government mandates, reductions in large truck crashes may be achieved. Practical application: Results imply that increased enforcement and use of crash avoidance technologies can improve the large truck crash problem. Copyright © 2017 National Safety Council and Elsevier Ltd. All rights reserved.

Aerodynamics Research Revolutionizes Truck Design

NASA Technical Reports Server (NTRS)

2008-01-01

During the 1970s and 1980s, researchers at Dryden Flight Research Center conducted numerous tests to refine the shape of trucks to reduce aerodynamic drag and improved efficiency. During the 1980s and 1990s, a team based at Langley Research Center explored controlling drag and the flow of air around a moving body. Aeroserve Technologies Ltd., of Ottawa, Canada, with its subsidiary, Airtab LLC, in Loveland, Colorado, applied the research from Dryden and Langley to the development of the Airtab vortex generator. Airtabs create two counter-rotating vortices to reduce wind resistance and aerodynamic drag of trucks, trailers, recreational vehicles, and many other vehicles.

7 CFR 58.317 - Bulk butter trucks, boats, texturizers, and packers.

Code of Federal Regulations, 2013 CFR

2013-01-01

... 7 Agriculture 3 2013-01-01 2013-01-01 false Bulk butter trucks, boats, texturizers, and packers... and Grading Service 1 Equipment and Utensils § 58.317 Bulk butter trucks, boats, texturizers, and packers. Bulk butter trucks, boats, texturizers, and packers shall be constructed of aluminum, stainless...

7 CFR 58.317 - Bulk butter trucks, boats, texturizers, and packers.

Code of Federal Regulations, 2014 CFR

2014-01-01

... 7 Agriculture 3 2014-01-01 2014-01-01 false Bulk butter trucks, boats, texturizers, and packers... and Grading Service 1 Equipment and Utensils § 58.317 Bulk butter trucks, boats, texturizers, and packers. Bulk butter trucks, boats, texturizers, and packers shall be constructed of aluminum, stainless...

7 CFR 58.317 - Bulk butter trucks, boats, texturizers, and packers.

Code of Federal Regulations, 2011 CFR

2011-01-01

... 7 Agriculture 3 2011-01-01 2011-01-01 false Bulk butter trucks, boats, texturizers, and packers... and Grading Service 1 Equipment and Utensils § 58.317 Bulk butter trucks, boats, texturizers, and packers. Bulk butter trucks, boats, texturizers, and packers shall be constructed of aluminum, stainless...

7 CFR 58.317 - Bulk butter trucks, boats, texturizers, and packers.

Code of Federal Regulations, 2012 CFR

2012-01-01

... 7 Agriculture 3 2012-01-01 2012-01-01 false Bulk butter trucks, boats, texturizers, and packers... and Grading Service 1 Equipment and Utensils § 58.317 Bulk butter trucks, boats, texturizers, and packers. Bulk butter trucks, boats, texturizers, and packers shall be constructed of aluminum, stainless...

7 CFR 58.317 - Bulk butter trucks, boats, texturizers, and packers.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 7 Agriculture 3 2010-01-01 2010-01-01 false Bulk butter trucks, boats, texturizers, and packers... and Grading Service 1 Equipment and Utensils § 58.317 Bulk butter trucks, boats, texturizers, and packers. Bulk butter trucks, boats, texturizers, and packers shall be constructed of aluminum, stainless...

Advanced vehicle dynamics of heavy trucks with the perspective of road safety

NASA Astrophysics Data System (ADS)

Trigell, Annika Stensson; Rothhämel, Malte; Pauwelussen, Joop; Kural, Karel

2017-10-01

This paper presents state-of-the art within advanced vehicle dynamics of heavy trucks with the perspective of road safety. The most common accidents with heavy trucks involved are truck against passenger cars. Safety critical situations are for example loss of control (such as rollover and lateral stability) and a majority of these occur during speed when cornering. Other critical situations are avoidance manoeuvre and road edge recovery. The dynamic behaviour of heavy trucks have significant differences compared to passenger cars and as a consequence, successful application of vehicle dynamic functions for enhanced safety of trucks might differ from the functions in passenger cars. Here, the differences between vehicle dynamics of heavy trucks and passenger cars are clarified. Advanced vehicle dynamics solutions with the perspective of road safety of trucks are presented, beginning with the topic vehicle stability, followed by the steering system, the braking system and driver assistance systems that differ in some way from that of passenger cars as well.

Gap Acceptance During Lane Changes by Large-Truck Drivers-An Image-Based Analysis.

PubMed

Nobukawa, Kazutoshi; Bao, Shan; LeBlanc, David J; Zhao, Ding; Peng, Huei; Pan, Christopher S

2016-03-01

This paper presents an analysis of rearward gap acceptance characteristics of drivers of large trucks in highway lane change scenarios. The range between the vehicles was inferred from camera images using the estimated lane width obtained from the lane tracking camera as the reference. Six-hundred lane change events were acquired from a large-scale naturalistic driving data set. The kinematic variables from the image-based gap analysis were filtered by the weighted linear least squares in order to extrapolate them at the lane change time. In addition, the time-to-collision and required deceleration were computed, and potential safety threshold values are provided. The resulting range and range rate distributions showed directional discrepancies, i.e., in left lane changes, large trucks are often slower than other vehicles in the target lane, whereas they are usually faster in right lane changes. Video observations have confirmed that major motivations for changing lanes are different depending on the direction of move, i.e., moving to the left (faster) lane occurs due to a slower vehicle ahead or a merging vehicle on the right-hand side, whereas right lane changes are frequently made to return to the original lane after passing.

Truck side guard technical overview : safety and operational considerations

DOT National Transportation Integrated Search

2015-04-23

This technical overview provides safety and operational considerations for truck side guards. Truck side guards are designed to keep pedestrians, bicyclists, and motorcyclists - known as vulnerable road users (VRUs) from being run over by a large tru...

The energy consumption and cost savings of truck electrification for heavy duty vocational applications

DOE Office of Scientific and Technical Information (OSTI.GOV)

Gao, Zhiming; Lin, Zhenhong; Franzese, Oscar

This paper evaluates the application of battery electric vehicles (BEVs) and genset plug-in hybrid electric vehicles (PHEVs) to Class-7 local delivery trucks and genset PHEV for Class-8 utility bucket trucks over widely real-world driving data performed by conventional heavy-duty trucks. A simulation tool based on vehicle tractive energy methodology and component efficiency for addressing component and system performance was developed to evaluate the energy consumption and performance of the trucks. As part of this analysis, various battery sizes combined with different charging powers on the E-Trucks for local delivery and utility bucket applications were investigated. The results show that themore » E-Truck applications not only reduce energy consumption but also achieve significant energy cost savings. For delivery E-Trucks, the results show that periodic stops at delivery sites provide sufficient time for battery charging, and for this reason, a high-power charger is not necessary. For utility bucket PHEV trucks, energy consumption per mile of bucket truck operation is typically higher because of longer idling times and extra high idling load associated with heavy utility work. The availability of on-route charging is typically lacking at the work sites of bucket trucks; hence, the battery size of these trucks is somewhat larger than that of the delivery trucks studied.« less

Dynamic simulation of train-truck collision at level crossings

NASA Astrophysics Data System (ADS)

Ling, Liang; Guan, Qinghua; Dhanasekar, Manicka; Thambiratnam, David P.

2017-01-01

Trains crashing onto heavy road vehicles stuck across rail tracks are more likely occurrences at level crossings due to ongoing increase in the registration of heavy vehicles and these long heavy vehicles getting caught in traffic after partly crossing the boom gate; these incidents lead to significant financial losses and societal costs. This paper presents an investigation of the dynamic responses of trains under frontal collision on road trucks obliquely stuck on rail tracks at level crossings. This study builds a nonlinear three-dimensional multi-body dynamic model of a passenger train colliding with an obliquely stuck road truck on a ballasted track. The model is first benchmarked against several train dynamics packages and its predictions of the dynamic response and derailment potential are shown rational. A geometry-based derailment assessment criterion is applied to evaluate the derailment behaviour of the frontal obliquely impacted trains under different conditions. Sensitivities of several key influencing parameters, such as the train impact speed, the truck mass, the friction at truck tyres, the train-truck impact angle, the contact friction at the collision zone, the wheel/rail friction and the train suspension are reported.

Truck industry forum material.

DOT National Transportation Integrated Search

2017-03-01

The following PowerPoint presentation is the draft version of the presentation that would be used for : the upcoming half-day Infrastructure-Friendlier Trucks Forum tentatively scheduled for Friday, : March 13, 2015. This forum presented a project st...

Design and analysis of truck body for increasing the payload capacity

NASA Astrophysics Data System (ADS)

Vamshi Krishna, K.; Yugandhar Reddy, K.; Venugopal, K.; Ravi, K.

2017-11-01

Truck industry is a major source of transportation in India. With an average truck travelling about 300 kilometers per day [1], every kilogram of truck weight is of concern to the industry in order to get the best out of the truck. The main objective of this project is to increase the payload capacity of automotive truck body. Every kilogram of increased vehicle weight will decrease the vehicle payload capacity in turn increasing the manufacturing cost and reducing the fuel economy by increase the fuel consumption. With the intension of weight reduction, standard truck body has been designed and analyzed in ANSYS software. C-cross section beams were used instead of conventional rectangular box sections to reduce the weight of the body. Light-weight Aluminum alloy Al 6061 T6 is used to increase the payload capacity. The strength of the Truck platform is monitored in terms of deformation and stress concentration. These parameters will be obtained in structural analysis test condition environment. For reducing the stress concentration the concept of beams of uniform strength is used. Accordingly necessary modifications are done so that the optimized model has a better stress distribution and much lesser weight compared to the conventional model. The results obtained by analyzing the modified model are compared with the standard model.

Truck stop and rest area parking study : final report

DOT National Transportation Integrated Search

2001-04-01

Crowding and illegal parking of trucks at existing public rest areas and along the highway ramps and shoulders has been recognized as a growing concern, with potential safety implications. In Connecticut there are approximately 1,200 trucks that trav...

Truck accident and fatality rates calculated from California highway accident statistics for 1980 and 1981

DOE Office of Scientific and Technical Information (OSTI.GOV)

Smith, R.N.; Wilmot, E.L.

California state highway accident rates for three types of truck vehicles (pickup, truck without trailer, and truck with trailer) were analyzed for 1980 and 1981 and for various road types in each of eleven state highway districts. Accident rates have not been available previously that are specific to truck vehicles, particularly truck with trailer. Reported data are presented that lead to several significant observations about truck accident rates: pickup truck accident rates are about twice the composite rates for all vehicle types; the fatality rates for trucks with trailer are nearly twice that for all vehicle types; fatality rates formore » trucks (without trailer) are comparable to the composite rates; and total accident and fatal-plus-injury rates for trucks with trailer are close to the composite rates in urban areas but higher in rural areas. The values for average total accident rates reported in 1981 are: 2.2 accidents per million vehicle miles (mvm) for pickups, 1.5 accidents per mvm for trucks, and 1.4 accidents per mvm for trucks with trailer. The values for average fatality rates reported in 1981 are: 3.8 fatalities per 100 mvm for pickups, 2.8 fatalities per 100 mvm for trucks, and 4.3 fatalities per 100 mvm for trucks with trailer. The reported rates for 1980 are approximately the same.« less

California heavy duty truck travel survey on selected sites.

DOT National Transportation Integrated Search

2001-12-01

The overall goal of the Heavy Duty Truck Travel (HDT) Survey was to collect representative truck travel data for selected sites in California. An integral aspect of the project was a literature search and inventory study of freight data survey collec...

Revised costs of large truck-and bus-involved crashes.

DOT National Transportation Integrated Search

2002-11-01

This study provides the latest estimates of the costs of highway crashes involving large trucks and buses by severity. Based on the latest data available, the estimated cost of police-reported crashes involving trucks with a gross weight rating of mo...

49 CFR 230.100 - Defects in tender truck axles and journals.

Code of Federal Regulations, 2011 CFR

2011-10-01

... 49 Transportation 4 2011-10-01 2011-10-01 false Defects in tender truck axles and journals. 230... Steam Locomotives and Tenders Running Gear § 230.100 Defects in tender truck axles and journals. (a... wheel seats that is more than 1/8 of an inch in depth. (b) Tender truck journal condemning defects...

Supplying of Assembly Lines Using Train of Trucks

NASA Astrophysics Data System (ADS)

Čujan, Zdeněk; Fedorko, Gabriel

2016-11-01

The typical supply system conceptions, i.e. the concepts "Just-in-time" (JIT) and "Just-in-sequence" (JIS) are very important factors with regard to a fluent operation of the assembly lines. Therefore the contemporary intra plant transport systems are being replaced by a new kind of the transportation technology, namely by means of the trains of trucks. The trains of trucks are used in two possible operational modes: either with a driver or without driver (fully automated). The trucks of the logistic trains are also cheaper and they are able to carry a larger volume and mass of the material at once. There are reduced in this way not only the investment costs, but also the operational expenses.

Effects of geometric design features on truck crashes on limited-access highways.

DOT National Transportation Integrated Search

2012-06-01

Freight can be transported between most points in the country quite efficiently using trucks. However, involvement of large : trucks in crashes can cause much damage and serious injuries, due to their large sizes and heavy weights. Large truck : cras...

Truck accidents at freeway ramps : data analysis and high-risk site identification

DOT National Transportation Integrated Search

1998-01-01

To examine the relationship of ramp design to truck accident rates, this paper presents an analysis of truck accidents in Washington State, plus a comparison to limited data from Colorado and California. The authors group freeway truck accidents by r...

Alternative Fuels Data Center: How Do Liquefied Natural Gas Trucks Work?

Science.gov Websites

Liquefied Natural Gas Trucks Work? to someone by E-mail Share Alternative Fuels Data Center: How Do Liquefied Natural Gas Trucks Work? on Facebook Tweet about Alternative Fuels Data Center: How Do Liquefied Natural Gas Trucks Work? on Twitter Bookmark Alternative Fuels Data Center: How Do Liquefied Natural Gas

Computations for Truck Sliding with TRUCK 3.1 Code

DTIC Science & Technology

1989-08-01

16 REFERENCES 1. L u. \\Villiam N.. Hobbs. Norman P. and Atkinson, Michael. TRUCK 3.1-An Improrcd Digital (’oiputtr Program for Calculating the Response...for Operations and Plans ATIN: Technical Libary Director of Chemical & Nuear Operations Dpartnt of the AIW Waskbington, DC 20310 1 Cocaeder US Ay...Lawrenoe Livermore Lab. ATIN: Code 2124, Tedhnical ATTN: Tech Info Dept L-3 Reports Libary P.O. Be 808 Monterey, CA 93940 Livermore, CA 94550 AFSC

Investigation of Truck Size and Weight Limits - Technical Supplement. Vol. 1. Analysis of Truck Payloads Under Various Limits of Size, Weight and Configuration

DOT National Transportation Integrated Search

1981-02-01

This volume documents the results of an analysis of the impact that various truck size and weight limits have on the carrier equipment selection process as a result of changes, in the design payload and design density of individual trucks. An analysi...

Particle damping applied research on mining dump truck vibration control

NASA Astrophysics Data System (ADS)

Song, Liming; Xiao, Wangqiang; Guo, Haiquan; Yang, Zhe; Li, Zeguang

2018-05-01

Vehicle vibration characteristics has become an important evaluation indexes of mining dump truck. In this paper, based on particle damping technology, mining dump truck vibration control was studied by combining the theoretical simulation with actual testing, particle damping technology was successfully used in mining dump truck cab vibration control. Through testing results analysis, with a particle damper, cab vibration was reduced obviously, the methods and basis were provided for vehicle vibration control research and particle damping technology application.

Fuel assembly shaker and truck test simulation

DOE Office of Scientific and Technical Information (OSTI.GOV)

Klymyshyn, Nicholas A.; Jensen, Philip J.; Sanborn, Scott E.

2014-09-30

This study continues the modeling support of the SNL shaker table task from 2013 and includes analysis of the SNL 2014 truck test campaign. Detailed finite element models of the fuel assembly surrogate used by SNL during testing form the basis of the modeling effort. Additional analysis was performed to characterize and filter the accelerometer data collected during the SNL testing. The detailed fuel assembly finite element model was modified to improve the performance and accuracy of the original surrogate fuel assembly model in an attempt to achieve a closer agreement with the low strains measured during testing. The revisedmore » model was used to recalculate the shaker table load response from the 2013 test campaign. As it happened, the results remained comparable to the values calculated with the original fuel assembly model. From this it is concluded that the original model was suitable for the task and the improvements to the model were not able to bring the calculated strain values down to the extremely low level recorded during testing. The model needs more precision to calculate strains that are so close to zero. The truck test load case had an even lower magnitude than the shaker table case. Strain gage data from the test was compared directly to locations on the model. Truck test strains were lower than the shaker table case, but the model achieved a better relative agreement of 100-200 microstrains (or 0.0001-0.0002 mm/mm). The truck test data included a number of accelerometers at various locations on the truck bed, surrogate basket, and surrogate fuel assembly. This set of accelerometers allowed an evaluation of the dynamics of the conveyance system used in testing. It was discovered that the dynamic load transference through the conveyance has a strong frequency-range dependency. This suggests that different conveyance configurations could behave differently and transmit different magnitudes of loads to the fuel even when traveling down the same

Rail vs truck transport of biomass.

PubMed

Mahmudi, Hamed; Flynn, Peter C

2006-01-01

This study analyzes the economics of transshipping biomass from truck to train in a North American setting. Transshipment will only be economic when the cost per unit distance of a second transportation mode is less than the original mode. There is an optimum number of transshipment terminals which is related to biomass yield. Transshipment incurs incremental fixed costs, and hence there is a minimum shipping distance for rail transport above which lower costs/km offset the incremental fixed costs. For transport by dedicated unit train with an optimum number of terminals, the minimum economic rail shipping distance for straw is 170 km, and for boreal forest harvest residue wood chips is 145 km. The minimum economic shipping distance for straw exceeds the biomass draw distance for economically sized centrally located power plants, and hence the prospects for rail transport are limited to cases in which traffic congestion from truck transport would otherwise preclude project development. Ideally, wood chip transport costs would be lowered by rail transshipment for an economically sized centrally located power plant, but in a specific case in Alberta, Canada, the layout of existing rail lines precludes a centrally located plant supplied by rail, whereas a more versatile road system enables it by truck. Hence for wood chips as well as straw the economic incentive for rail transport to centrally located processing plants is limited. Rail transshipment may still be preferred in cases in which road congestion precludes truck delivery, for example as result of community objections.

77 FR 32013 - Truck Size and Weight; Technical Correction

Federal Register 2010, 2011, 2012, 2013, 2014

2012-05-31

...-2012-0037] RIN 2125-AF45 Truck Size and Weight; Technical Correction AGENCY: Federal Highway...: This rule makes a technical correction to the regulations that govern Longer Combination Vehicles (LCV... INFORMATION CONTACT: John Nicholas, Truck Size and Weight Program Manager, Office of Freight Management and...

Plug-In Hybrid Urban Delivery Truck Technology Demonstration

DOE Office of Scientific and Technical Information (OSTI.GOV)

Miyasato, Matt; Impllitti, Joseph; Pascal, Amar

The I-710 and CA-60 highways are key transportation corridors in the Southern California region that are heavily used on a daily basis by heavy duty drayage trucks that transport the cargo from the ports to the inland transportation terminals. These terminals, which include store/warehouses, inland-railways, are anywhere from 5 to 50 miles in distance from the ports. The concentrated operation of these drayage vehicles in these corridors has had and will continue to have a significant impact on the air quality in this region whereby significantly impacting the quality of life in the communities surrounding these corridors. To reduce thesemore » negative impacts it is critical that zero and near-zero emission technologies be developed and deployed in the region. A potential local market size of up to 46,000 trucks exists in the South Coast Air Basin, based on near- dock drayage trucks and trucks operating on the I-710 freeway. The South Coast Air Quality Management District (SCAQMD), California Air Resources Board (CARB) and Southern California Association of Governments (SCAG) — the agencies responsible for preparing the State Implementation Plan required under the federal Clean Air Act — have stated that to attain federal air quality standards the region will need to transition to broad use of zero and near zero emission energy sources in cars, trucks and other equipment (Southern California Association of Governments et al, 2011). SCAQMD partnered with Volvo Trucks to develop, build and demonstrate a prototype Class 8 heavy-duty plug-in hybrid drayage truck with significantly reduced emissions and fuel use. Volvo’s approach leveraged the group’s global knowledge and experience in designing and deploying electromobility products. The proprietary hybrid driveline selected for this proof of concept was integrated with multiple enhancements to the complete vehicle in order to maximize the emission and energy impact of electrification. A detailed review of

26 CFR 145.4051-1 - Imposition of tax on heavy trucks and trailers sold at retail.

Code of Federal Regulations, 2013 CFR

2013-04-01

...) Automobile truck chassis and bodies; (ii) Truck trailer and semitrailer chassis and bodies; and (iii.... A sale of an automobile truck, truck trailer or semitrailer, shall be considered to be a sale of a... is an automobile truck, truck trailer or semitrailer, or a tractor of the kind chiefly used for...

26 CFR 145.4051-1 - Imposition of tax on heavy trucks and trailers sold at retail.

Code of Federal Regulations, 2014 CFR

2014-04-01

...) Automobile truck chassis and bodies; (ii) Truck trailer and semitrailer chassis and bodies; and (iii.... A sale of an automobile truck, truck trailer or semitrailer, shall be considered to be a sale of a... is an automobile truck, truck trailer or semitrailer, or a tractor of the kind chiefly used for...

26 CFR 145.4051-1 - Imposition of tax on heavy trucks and trailers sold at retail.

Code of Federal Regulations, 2012 CFR

2012-04-01

...) Automobile truck chassis and bodies; (ii) Truck trailer and semitrailer chassis and bodies; and (iii.... A sale of an automobile truck, truck trailer or semitrailer, shall be considered to be a sale of a... is an automobile truck, truck trailer or semitrailer, or a tractor of the kind chiefly used for...

26 CFR 145.4051-1 - Imposition of tax on heavy trucks and trailers sold at retail.

Code of Federal Regulations, 2011 CFR

2011-04-01

...) Automobile truck chassis and bodies; (ii) Truck trailer and semitrailer chassis and bodies; and (iii.... A sale of an automobile truck, truck trailer or semitrailer, shall be considered to be a sale of a... is an automobile truck, truck trailer or semitrailer, or a tractor of the kind chiefly used for...

Investigation of the gas-jet ejector in KamAZ trucks

DOE Office of Scientific and Technical Information (OSTI.GOV)

Shkret, L.Y.; Berezea, A.I.; Lobkov, A.N.

1984-03-01

This article considers the possibility of using gas-jet vacuum pumps in tank trucks for transporting liquids (water) at drilling sites. The discharge system of the KamAZ trucks can be reliably sealed by an engine brake, an important prerequisite of reliable operation of a gas-jet ejector that is switched on when the tank is being filled. The ejector consists of a housing, a Laval nozzle, a front wall with cylindrical neck, a tin-plate diffuser, an air supply pipe, and a flange for attaching the ejector to the flange of the exhaust muffler of the truck. The gas-jet ejectors are driven bymore » the exhaust gas (EG) of the trucks. The dependences of the EG flow rate, fuel expenditure, EG temperature ahead of the ejector, and the rotational frequency of the engine crankshaft on the diameter at different EG pressures. It is recommended that gas-jet ejectors be used on series produced tank trucks instead of rotary vacuum pumps with mechanical drive.« less

Could Expanded Freight Rail Reduce Air Pollution from Trucks?

NASA Astrophysics Data System (ADS)

Bickford, E. E.; Holloway, T.; Johnston, M.

2010-12-01

Cars, trucks and trains are a significant source of emissions that impact both climate and air quality on regional to global scales. Diesel vehicles, most used for freight transport, account for 42% of on-road nitrogen oxide emissions, 58% of on-road fine particulate emissions, and 21% of on-road carbon dioxide emissions. With freight tonnage projected to increase 28% by 2018, and freight trucks the fastest growing source of transportation emissions, we evaluate the potential for increased rail capacity to reduce the environmental impacts of trucks. Most widely available mobile source emissions inventories contain insufficient spatial detail to quantify realistic emission scenario options, and none to date have been linked with commodity flow information in a manner appropriate to consider the true potential of rail substitution. To support a truck-to-rail analysis, and other policy assessments requiring roadway-by-roadway analysis, we have developed a freight emissions inventory for the Upper Midwest based on the Federal Highway Administration’s Freight Analysis Framework version 2.2 and the Environmental Protection Agency’s on-road emissions model, Mobile6.2. Using a Geographical Information System (GIS), we developed emissions scenarios for truck-to-rail modal shifts where 95% of freight tonnage on trips longer than 400 miles is shifted off of trucks and onto railways. Scenarios will be analyzed with the Community Multiscale Air Quality (CMAQ) regional model to assess air quality impacts of associated changes. By using well-respected transportation data and realistic assumptions, results from this study have the potential to inform decisions on transportation sustainability, carbon management, public health, and air quality.

Track-train dynamic analysis and test program, truck static test

NASA Technical Reports Server (NTRS)

Nemes, A. G.

1974-01-01

A series of tests were conducted to define the characteristics of an ASF 11 Ride Truck Assembly including joint slop, friction and stiffness. Loading to the truck assembly included vertical load to simulate the car/pool loading combined with lateral or moment loading that resulted in desired truck deflections for the various phases of testing. All seven test conditions were successfully completed with load and deflection data being collected. No attempt is made to reduce the applicable data other than to provide computer plots.

Effect of Michigan multi-axle trucks on pavement distress and profile: executive summary.

DOT National Transportation Integrated Search

2009-02-01

Truck traffic is a major factor in pavement design because truck loads are the primary cause of : pavement distresses. Trucks have different axle configurations that cause different levels of : pavement damage. The American Association of State Highw...

Alternative Fuels Data Center: Truck Stop Electrification Site Data

Science.gov Websites

Collection Methods Tools Printable Version Share this resource Send a link to Alternative Fuels Data Center: Truck Stop Electrification Site Data Collection Methods to someone by E-mail Share Alternative Fuels Data Center: Truck Stop Electrification Site Data Collection Methods on Facebook Tweet about

A comparison of pipeline versus truck transport of bio-oil.

PubMed

Pootakham, Thanyakarn; Kumar, Amit

2010-01-01

Biomass-based energy and fuels are receiving attention because they are considered carbon neutral; i.e. the amount of CO(2) released during combustion of this biomass is nearly the same as that taken up by the plants during their growth. Bio-oil is a dark viscous liquid consisting of hydrocarbons. These are produced by fast pyrolysis of biomass. "As-is" biomass material has a low energy density (MJ m(-3)), hence, the cost of transporting this energy is high. Bio-oil has a high energy density as compared to "as-is" biomass material, consequently it helps in reducing the cost of energy transport. This study compares the life cycle assessment of transportation of bio-oil by pipeline with that by truck. The scope of the work includes the transportation of bio-oil by truck or pipeline from a centralized plant (supplied with forest biomass) to an end-user. Two cases are studied for pipeline transport of bio-oil: the first case considers a coal-based electricity supply for pumping the bio-oil through a pipeline; the second case considers an electricity supply from a renewable resource. The two cases of pipeline transport are compared to two cases of truck transport (truck trailer and super B-train truck). The life cycle greenhouse gas (GHG) emissions from the pipeline transport of bio-oil for the two cases of electricity supply are 345 and 17 g of CO(2) m(-3) km(-1), respectively. Similar values for transport by trailer (capacity - 30 m(3)) and super B-train truck (capacity - 60 m(3)) are 89 and 60 g of CO(2) m(-3) km(-1), respectively. Energy input for bio-oil transport is 3.95 MJ m(-3) km(-1) by pipeline, 2.59 MJ m(-3) km(-1) by truck and 1.66 MJ m(-3) km(-1) by super B-train truck. The results show that GHG emissions in pipeline transport are largely dependent on the source of electricity (higher for coal-based electricity). Substituting 250 m(3) day(-1) of pipeline-transported bio-oil for coal-based electricity can mitigate about 5.1 million tonnes of CO(2) per year

Estimation of the demand for commercial truck parking on interstate highways in Virginia

DOT National Transportation Integrated Search

2003-01-01

The steady growth of commercial truck traveling on most Interstate and primary highways has resulted in increasing demand for both public rest areas and private truck stops in Virginia. In addition, inadequate parking spaces for commercial trucks may...

Methodologies for reducing truck turn time at marine container terminals.

DOT National Transportation Integrated Search

2005-05-01

One of the prominent issues container terminal operators in the US are seeking to address is how to effectively : reduce truck turn time. Historically, truck turn time has received very little attention from terminal operators because port : congesti...

Long-Haul Truck Idling Burns Up Profits

DOE Office of Scientific and Technical Information (OSTI.GOV)

None

2015-08-12

Long-haul truck drivers perform a vitally important service. In the course of their work, they must take rest periods as required by federal law. Most drivers remain in their trucks, which they keep running to provide power for heating, cooling, and other necessities. Such idling, however, comes at a cost; it is an expensive and polluting way to keep drivers safe and comfortable. Increasingly affordable alternatives to idling not only save money and reduce pollution, but also help drivers get a better night's rest.

Impact of left lane truck restriction strategies on multilane highways in Louisiana : a literature review.

DOT National Transportation Integrated Search

2009-04-01

Truck lane restriction strategies (TLRS) are a means of managing truck traffic on highways by prohibiting trucks from using certain lanes to minimize interaction between trucks and other vehicles. The purpose of this study is to review the literature...

Air flow testing on aerodynamic truck

NASA Technical Reports Server (NTRS)

1975-01-01

After leasing a cab-over tractor-trailer from a Southern California firm, Dryden researchers added sheet metal modifications like those shown here. They rounded the front corners and edges, and placed a smooth fairing on the cab's roofs and sides extending back to the trailer. During the investigation of truck aerodynamics, the techniques honed in flight research proved highly applicable. By closing the gap between the cab and the trailer, for example, researchers discovered a significant reduction in aerodynamic drag, one resulting in 20 to 25 percent less fuel consumption than the standard design. Many truck manufacturers subsequently incorporated similar modifications on their products.

Coca-Cola Hybrid Electric Delivery Truck Testing | Transportation Research

Science.gov Websites

other on-road performance data on five heavy-duty hybrid electric trucks and five conventional diesel the study, the hybrid vehicles demonstrated 13.7% higher fuel economy than their conventional information about the study. Project Startup: Evaluating Coca-Cola's Class 8 Hybrid Electric Delivery Trucks

Gap Acceptance During Lane Changes by Large-Truck Drivers—An Image-Based Analysis

PubMed Central

Nobukawa, Kazutoshi; Bao, Shan; LeBlanc, David J.; Zhao, Ding; Peng, Huei; Pan, Christopher S.

2016-01-01

This paper presents an analysis of rearward gap acceptance characteristics of drivers of large trucks in highway lane change scenarios. The range between the vehicles was inferred from camera images using the estimated lane width obtained from the lane tracking camera as the reference. Six-hundred lane change events were acquired from a large-scale naturalistic driving data set. The kinematic variables from the image-based gap analysis were filtered by the weighted linear least squares in order to extrapolate them at the lane change time. In addition, the time-to-collision and required deceleration were computed, and potential safety threshold values are provided. The resulting range and range rate distributions showed directional discrepancies, i.e., in left lane changes, large trucks are often slower than other vehicles in the target lane, whereas they are usually faster in right lane changes. Video observations have confirmed that major motivations for changing lanes are different depending on the direction of move, i.e., moving to the left (faster) lane occurs due to a slower vehicle ahead or a merging vehicle on the right-hand side, whereas right lane changes are frequently made to return to the original lane after passing. PMID:26924947

Energy Use and Other Comparisons Between Diesel and Gasoline Trucks

DOT National Transportation Integrated Search

1977-02-01

This report presents fuel consumption and other data on comparable diesel and gasoline trucks. The data was compiled from actual, operational records of the Maine Department of Transportation for trucks of about 24,000 pounds gross vehicle weight and...

The avoidance of weigh stations in Virginia by overweight trucks.

DOT National Transportation Integrated Search

1992-01-01

The primary objective of this research was to examine the avoidance of weigh stations in Virginia by overweight trucks. Secondary objectives were (1) to determine the magnitude of overweight truck activity on selected routes and (2) to compare traffi...

Truck size and weight enforcement technologies : state of the practice

DOT National Transportation Integrated Search

2009-05-01

This report is a deliverable of Task 2 of FHWAs Truck Size and Weight Enforcement Technology Project. The primary project objective was to recommend strategies to encourage the deployment of roadside technologies to improve truck size and weight e...

Truck travel characteristics as an indicator of system condition and performance : [technical summary].

DOT National Transportation Integrated Search

2011-01-01

Truck traffic has significantly increased in past decades. The effect of trucks on the level of service is determined by considering passenger car equivalents (PCE) of trucks. The Highway Capacity Manual (HCM) uses a single PCE value for all tucks co...

Improving the safety of older truck drivers : developing a framework for moving forward.

DOT National Transportation Integrated Search

2016-12-01

The overarching goal of this project was to contribute to a reduction in crashes among older truck drivers. The project represents the starting point for developing a program that can be used by older truck drivers and trucking company management to ...

Development of a large truck safety data needs study plan. Vol. 1, Summary

DOT National Transportation Integrated Search

1986-02-01

This report discusses the results of a study to determine the data needs necessary to address truck safety issues and to develop a data collection and analysis plan. Priority truck safety issues that are amenable to truck accident data analyses were ...

Investigation of factors associated with truck crash severity in Nebraska.

DOT National Transportation Integrated Search

2012-06-01

The severity of truck crashes is a concern in the state of Nebraska. This study was undertaken to investigate factors : associated with the severity of truck crashes. A two-year dataset obtained from the Nebraska Department of Roads : (NDOR) was anal...

49 CFR 229.67 - Trucks.

Code of Federal Regulations, 2010 CFR

2010-10-01

...) The male center plate shall extend into the female center plate at least 3/4 inch. On trucks constructed to transmit tractive effort through the center plate or center pin, the male center plate shall...

49 CFR 229.67 - Trucks.

Code of Federal Regulations, 2011 CFR

2011-10-01

...) The male center plate shall extend into the female center plate at least 3/4 inch. On trucks constructed to transmit tractive effort through the center plate or center pin, the male center plate shall...

Alternative Fuels Data Center: How Do Natural Gas Class 8 Trucks Work?

Science.gov Websites

Natural Gas Class 8 Trucks Work? to someone by E-mail Share Alternative Fuels Data Center: How Do Natural Gas Class 8 Trucks Work? on Facebook Tweet about Alternative Fuels Data Center: How Do Natural Gas Class 8 Trucks Work? on Twitter Bookmark Alternative Fuels Data Center: How Do Natural Gas Class 8

27 CFR 27.174 - Tank cars and tank trucks to be sealed.

Code of Federal Regulations, 2012 CFR

2012-04-01

... 27 Alcohol, Tobacco Products and Firearms 1 2012-04-01 2012-04-01 false Tank cars and tank trucks... Tank cars and tank trucks to be sealed. Where a shipment of distilled spirits from customs custody to the distilled spirits plant is made in a tank car or tank truck, all openings affording access to the...

27 CFR 27.174 - Tank cars and tank trucks to be sealed.

Code of Federal Regulations, 2011 CFR

2011-04-01

... 27 Alcohol, Tobacco Products and Firearms 1 2011-04-01 2011-04-01 false Tank cars and tank trucks... Tank cars and tank trucks to be sealed. Where a shipment of distilled spirits from customs custody to the distilled spirits plant is made in a tank car or tank truck, all openings affording access to the...

27 CFR 27.174 - Tank cars and tank trucks to be sealed.

Code of Federal Regulations, 2014 CFR

2014-04-01

... 27 Alcohol, Tobacco Products and Firearms 1 2014-04-01 2014-04-01 false Tank cars and tank trucks... Tank cars and tank trucks to be sealed. Where a shipment of distilled spirits from customs custody to the distilled spirits plant is made in a tank car or tank truck, all openings affording access to the...

Frito-Lay Electric Delivery Truck Testing | Transportation Research | NREL

Science.gov Websites

Frito-Lay Electric Delivery Truck Evaluation Frito-Lay Electric Delivery Truck Evaluation Photo of . The on-road portion of this 12-month evaluation, launched in 2013, focuses on collecting and analyzing . Publications The following documents provide more information about the study. Field Evaluation of Medium-Duty

Finite element analysis on the bending condition of truck frame before and after opening

NASA Astrophysics Data System (ADS)

Cai, Kaiwu; Cheng, Wei; Lu, Jifu

2018-05-01

Based on the design parameters of a truck frame, the structure design and model of the truck frame are built. Based on the finite element theory, the load, the type of fatigue and the material parameters of the frame are combined with the semi-trailer. Using finite element analysis software, after a truck frame hole in bending condition for the finite element analysis of comparison, through the analysis found that the truck frame hole under bending condition can meet the strength requirements are very helpful for improving the design of the truck frame.

Outlook for trucks and trailers

DOT National Transportation Integrated Search

2005-11-01

Demand for commercial trucks and trailers scored impressive gains last year as a vibrant : economy, strong customer markets, relatively modest levels of inflation and interest rates, : and the accelerated depreciation provisions of the Tax Stimulus p...

75 FR 20396 - Yale Industrial Trucks-PGH, Inc. Monroeville, PA; Notice of Negative Determination Regarding...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-04-19

... DEPARTMENT OF LABOR Employment and Training Administration [TA-W-71,634] Yale Industrial Trucks... Industrial Trucks-PGH, Inc., Monroeville, Pennsylvania, was based on the findings that: The subject firm had not shifted abroad forklift truck sales and maintenance services or imported forklift truck sales and...

Rule-based optimization and multicriteria decision support for packaging a truck chassis

NASA Astrophysics Data System (ADS)

Berger, Martin; Lindroth, Peter; Welke, Richard

2017-06-01

Trucks are highly individualized products where exchangeable parts are flexibly combined to suit different customer requirements, this leading to a great complexity in product development. Therefore, an optimization approach based on constraint programming is proposed for automatically packaging parts of a truck chassis by following packaging rules expressed as constraints. A multicriteria decision support system is developed where a database of truck layouts is computed, among which interactive navigation then can be performed. The work has been performed in cooperation with Volvo Group Trucks Technology (GTT), from which specific rules have been used. Several scenarios are described where the methods developed can be successfully applied and lead to less time-consuming manual work, fewer mistakes, and greater flexibility in configuring trucks. A numerical evaluation is also presented showing the efficiency and practical relevance of the methods, which are implemented in a software tool.

Truck Route Choice Modeling using Large Streams of GPS Data

DOT National Transportation Integrated Search

2017-07-31

The primary goal of this research was to use large streams of truck-GPS data to analyze travel routes (or paths) chosen by freight trucks to travel between different origin and destination (OD) location pairs in metropolitan regions of Florida. Two s...

Energy Consumption and Cost Savings of Truck Electrification for Heavy-Duty Vehicle Applications

DOE PAGES

Gao, Zhiming; Lin, Zhenhong; Franzese, Oscar

2017-01-01

Our paper evaluates the application of battery electric vehicles (BEVs) and genset plug-in hybrid electric vehicles (PHEVs) to Class-7 local delivery trucks and genset PHEV for Class-8 utility bucket trucks over widely real-world driving data performed by conventional heavy-duty trucks.

Speed correlation and emission of truck vehicles on dynamic conditions

NASA Astrophysics Data System (ADS)

Lutfie, M.; Samang, L.; Adisasmita, S. A.; Ramli, M. I.

2018-04-01

Concentration of CO2, NOx, smoke, CO, and HC released from several truck vehicles taken emission and speed data every 5 second through measurements using the mobile emission analyzer as an emission test vehicle that absorbs the gas from exhaust of sample vehicles. Implementation in field is to put emission test equipment on the right side of truck, which will absorb 5 gas compounds for 5 - 20 minutes with a view to knowing truck emissions of moving conditions by considering load factors. The sample vehicles are diesel-fueled trucks. From the research on gas emissions, it is generally found that the tendency that arises is the faster the vehicle speed then the CO2, NOx, Smoke, CO, and HC gases released will be greater or will increase as the vehicle speed increases. Thus, the relationship of CO2, NOx, smoke, CO, and HC concentration with vehicle speed is a linear relationship.

Odyne Plug-In Hybrid Electric Utility Truck Testing | Transportation

Science.gov Websites

Research | NREL Odyne Plug-In Hybrid Electric Utility Truck Evaluation Odyne Plug-In Hybrid data on plug-in hybrid electric utility trucks operated by a variety of companies. Photo courtesy of Odyne, NREL NREL is evaluating the in-service performance of about 120 plug-in hybrid electric utility

Measuring Timber Truck Loads With Image Processing In Paper Mills

NASA Astrophysics Data System (ADS)

Silva, M. Santos; Carvalho, Fernando D.; Rodrigues, F. Carvalho; Goncalves, Ana N. R.

1989-04-01

The raw material for the paper industry is wood. To have an exact account of the stock of piled sawn tree trunks every truck load entering the plant's stockyard must be measured as to the amount of wood being brought in. Weighting down the trucks has its own problems, mainly, due to the high capacity of the tree trunks to absorb water. This problem is further enhanced when calculations must be made to arrive at the mass of sawn tree trunks which must go into the process of producing a certain quantity of paper pulp. The method presented here is based on two fixed cameras which take the image of the truck load. One takes a view of the trunks in order to get information on the average length of the tree trunks. The other obtains a side view which is digitised and by just discriminating against a grey level the area covered by the tree trunk cross section is measured. A simple arithmetic operation gives the volume of wood in the trunk. The same computer, a PC, will register the trucks particulars is almost independent of weather the wood is wet or dry and it serves trucks of any size.

Cost-benefit evaluation of large truck-automobile speed limit differentials on rural interstate highways.

DOT National Transportation Integrated Search

2005-11-01

Speed differentials between large trucks and automobiles on rural interstate highways are due to : both state regulated speed limits and commercial trucking company policies that restrict maximum truck : speeds. The initial portion of this effort inv...

Lateral Stability Simulation of a Rail Truck on Roller Rig

NASA Astrophysics Data System (ADS)

Dukkipati, Rao V.

The development of experimental facilities for rail vehicle testing is being complemented by analytic studies. The purpose of this effort has been to gain insight into the dynamics of rail vehicles in order to guide development of the Roller Rigs and to establish an analytic framework for the design and interpretation of tests to be conducted on Roller Rigs. The work described here represents initial efforts towards meeting these objectives. Generic linear models were developed of a freight car (with a characteristic North American three-piece truck) on tangent track. The models were developed using the generalized multi body dynamics software MEDYNA. Predictions were made of the theoretical linear model hunting (lateral stability) characteristics of the freight car, i. e., the critical speeds and frequencies, for five different configurations: (a) freight car on track, (b) the freight car's front truck on the roller stand and its rear truck on track, (c) freight car on the roller rig, (d) a single truck on track, and (e) single truck on the roller stand. These were compared with the Association of American Railroads' field test data for an 80-ton hopper car equipped with A-3 ride control trucks. Agreement was reached among all the analytical models, with all models indicating a range of hunting speeds of 2% from the highest to lowest. The largest discrepancy, approximately 6%, was indicated between the models and the field test data. Parametric study results using linear model of freight truck on the roller rig show that (a) increasing roller radius increases critical speed (b) increasing the wheel initial cone angle will decrease the hunting speed (c) increasing the roller cant increases hunting speed (d) decrowning of the wheelset on the rollers will not effect the hunting speed but induces longitudinal destabilizing horizontal forces at the contact and (e) lozenging of wheelset on the rollers induces a yaw moment and the hunting speed decreases with increasing

MDI Exposure for Spray-On Truck Bed Lining.

PubMed

Lofgren, Don J; Walley, Terry L; Peters, Phillip M; Weis, Marty L

2003-10-01

Worker exposure to MDI (methylenediphenyl isocyanate) in the sprayed-on truck bed lining industry was assessed by examining Washington State OSHA inspection files and industrial insurance records. The industry uses MDI to form a protective urethane coating on pick-up truck beds. The lining is applied by a worker using a handheld spray gun with application equipment at temperatures and pressures specified by the urethane supplier. Inspections with MDI sampling were initially identified by searching the agency's laboratory database and were further screened for the targeted process. Data for 13 employers was found and extracted from the inspection records. All were small companies with only 1 to 2 workers exposed to MDI; 10 of the 13 employers had started the bed lining service within the last 4 years. The process was found in truck bed lining specialty shops as well as in other truck-related businesses. Six different urethane products were used with reported MDI monomer concentrations of up to 75 percent along with varying concentrations of MDI pre-polymers and other reactants and solvents. Sampling for MDI by inspectors found 7 worksites with worker exposure in excess of the state and OSHA ceiling limit of 0.200 mg/M(3). Deficiencies in respirator programs and engineering controls for MDI were cited. A review of the industrial insurance records found a total of five MDI-related claims at 4 inspected worksites, two for new-onset asthma. It was concluded that workers in the urethane sprayed-on truck bed lining industry are at an increased risk of developing illnesses associated with isocyanate exposure. Interventions are needed to further assess the hazard as well as motivate and assist franchisers, distributors, and retailers to implement effective engineering controls and respiratory protection programs in this nationally emerging small employer industry.

Weather delay costs to trucking.

DOT National Transportation Integrated Search

2012-11-01

Estimates of the nations freight sector of transportation range to upwards of $600 billion of total gross domestic product with 70 percent of total value and 60 percent of total weight moving by truck. Weather-related delays can add significantly ...

Estimation and analysis of multifactor productivity in truck transportation : 1987 - 2003

DOT National Transportation Integrated Search

2009-02-01

The analysis has three objectives: 1) to estimate multifactor : productivity (MFP) in truck transportation during : 1987-2003; 2) to examine changes in multifactor productivity : in U.S. truck transportation, over time, and : to compare these changes...

Commercial truck parking detection technology evaluation for Columbia County rest areas.

DOT National Transportation Integrated Search

2016-11-01

Rest areas along Floridas interstate routes are heavily utilized by commercial trucks for overnight parking. : Many of the rest areas regularly experience 100% utilization of the commercial truck parking spaces : during the evening and early morni...

Consistent Condom Use during Casual Sex among Long-Truck Drivers in Togo.

PubMed

Yaya, Issifou; Landoh, Dadja Essoya; Saka, Bayaki; Vignikin, Kokou; Aboubakari, Abdoul-Samadou; N'dri, Kouamé Mathias; Gbetoglo, Kodjo Dodji; Edorh, Atavi-Mensah; Ahlegnan, Komla; Yenkey, Holali Comlan; Toudeka, Ayawavi Sitsopé; Pitché, Palokinam

2016-01-01

In 2008, the proportion of truck drivers who were not systematically protected during sex was 63% with casual partners and 60% with sex workers. Despite the high level of knowledge on HIV/AIDS and the growing awareness of the existence of the risk of HIV infection, condom use always encounters resistance among truck drivers in Togo. We sought to document the factors associated with condom use during casual sex among trucks' drivers in Togo. This was an analytical cross-sectional study conducted in 2010 and targeted truckers at truck station on the two main roads of Togo, Lomé-Cinkassé and Kodjoviakopé-Sanvee Condji. In this study, 1,782 trucks' drivers and their helpers were interviewed. All were men, and their mean age was 28.8 ± 8.8 years. Trucks' drivers were doing an average of 3 stops on their journeys and 1,229 (69%) of them had at least two years of experience in the work. Of the 1,782 trucks' drivers, only 620 (34.8%) had consistently used condoms during casual sex in the last three months. In multivariate analysis, predictors were: education level (primary schooling: OR = 1.54; p = 0.002; Secondary schooling and higher OR = 1.38; p = 0.036), good knowledge of ways of HIV transmission (OR = 1.53; p = 0.000), tested for HIV (OR = 1.67, p = 0.000), duration in the profession (2-5 years: OR = 1.43, p = 0.008; more than 5 years: OR = 1.38, p = 0.027), and HIV risk's perception (OR = 1.44, p = 0.000). These results highlight factors associated with consistent condom use during casual sex by truck drivers in Togo. This is a key population group at high risk of HIV transmission toward which the national HIV/AIDS control program should strengthen the HIV prevention strategies.

Occupational Hydrofluoric Acid Injury from Car and Truck Washing--Washington State, 2001-2013.

PubMed

Reeb-Whitaker, Carolyn K; Eckert, Carly M; Anderson, Naomi J; Bonauto, David K

2015-08-21

Exposure to hydrofluoric acid (HF) causes corrosive chemical burns and potentially fatal systemic toxicity. Car and truck wash cleaning products, rust removers, and aluminum brighteners often contain HF because it is efficient in breaking down roadway matter. The death of a truck wash worker from ingestion of an HF-based wash product and 48 occupational HF burn cases associated with car and truck washing in Washington State during 2001-2013 are summarized in this report. Among seven hospitalized workers, two required surgery, and all but one worker returned to the job. Among 48 injured workers, job titles were primarily auto detailer, car wash worker, truck wash worker, and truck driver. Because HF exposure can result in potentially severe health outcomes, efforts to identify less hazardous alternatives to HF-based industrial wash products are warranted.

Behavioral distinctions : the use of light-duty trucks and passenger cars

DOT National Transportation Integrated Search

2000-12-01

Pickup trucks, sport utility vehicles (SUVs), and minivans are classified as light duty trucks (LDTs) in the United States, resulting in a variety of regulatory protections. According to production and purchase trends, Americans have shifted toward a...

Developing a robust survey methodology for collecting information on the port truck drayage industry.

DOT National Transportation Integrated Search

2014-09-01

This paper describes the population characteristics in the drayage trucking population of the Port of Seattle as determined by the 2013 Truck : Driver Survey. The 2013 Truck Driver Survey was created to give the Port of Seattle more information on th...

Alternative Fuels Data Center: Heavy-Duty Truck Idle Reduction Technologies

Science.gov Websites

reduction technologies. Both DOE and the U.S. Environmental Protection Agency (EPA) provide information Heavy-Duty Truck Idle Reduction Technologies to someone by E-mail Share Alternative Fuels Data Center: Heavy-Duty Truck Idle Reduction Technologies on Facebook Tweet about Alternative Fuels Data

Quantifying the impact of large percent trucks proportion on rural freeways.

DOT National Transportation Integrated Search

2014-02-01

The trucking industry continues to contribute significantly to the economy of the United States. : The surface transportation system has been a critical component for the movement of goods and : services by the trucking industry across the country. R...

Investigation of the impact of large trucks on interstate highway safety.

DOT National Transportation Integrated Search

2002-02-01

This study concentrated on the impact of large trucks on interstate highway safety. The objectives of this study were to investigate the impact of trucks on interstate travel and offer recommendations for improving safety. The procedure involved revi...

26 CFR 48.4061(a)-5 - Sale of automobile truck bodies and chassis.

Code of Federal Regulations, 2011 CFR

2011-04-01

... 26 Internal Revenue 16 2011-04-01 2011-04-01 false Sale of automobile truck bodies and chassis. 48..., Tread Rubber, and Taxable Fuel Automotive and Related Items § 48.4061(a)-5 Sale of automobile truck bodies and chassis. (a) Sale of completed vehicle. An automobile truck (as defined by § 48.4061(a)-3(a...

26 CFR 48.4061(a)-5 - Sale of automobile truck bodies and chassis.

Code of Federal Regulations, 2012 CFR

2012-04-01

... 26 Internal Revenue 16 2012-04-01 2012-04-01 false Sale of automobile truck bodies and chassis. 48..., Tread Rubber, and Taxable Fuel Automotive and Related Items § 48.4061(a)-5 Sale of automobile truck bodies and chassis. (a) Sale of completed vehicle. An automobile truck (as defined by § 48.4061(a)-3(a...

26 CFR 48.4061(a)-5 - Sale of automobile truck bodies and chassis.

Code of Federal Regulations, 2013 CFR

2013-04-01

... 26 Internal Revenue 16 2013-04-01 2013-04-01 false Sale of automobile truck bodies and chassis. 48..., Tread Rubber, and Taxable Fuel Automotive and Related Items § 48.4061(a)-5 Sale of automobile truck bodies and chassis. (a) Sale of completed vehicle. An automobile truck (as defined by § 48.4061(a)-3(a...

26 CFR 48.4061(a)-5 - Sale of automobile truck bodies and chassis.

Code of Federal Regulations, 2010 CFR

2010-04-01

... 26 Internal Revenue 16 2010-04-01 2010-04-01 true Sale of automobile truck bodies and chassis. 48..., Tread Rubber, and Taxable Fuel Automotive and Related Items § 48.4061(a)-5 Sale of automobile truck bodies and chassis. (a) Sale of completed vehicle. An automobile truck (as defined by § 48.4061(a)-3(a...

Higher speed freight truck : structural analysis.

DOT National Transportation Integrated Search

2013-10-01

Sharma & Associates, Inc. (SA) had previously (20052009) developed a higher speed freight truck under sponsorship ofthe : Federal Railroad Administration (FRA). Under the current contract, SA wastasked with developing performance requirements : fo...

Trucks involved in fatal accidents codebook 2004 (Version March 23, 2007).

DOT National Transportation Integrated Search

2007-03-01

"This report provides documentation for UMTRIs file of Trucks Involved in Fatal Accidents (TIFA), : 2004, including distributions of the code values for each variable in the file. The 2004 TIFA file is : a census of all medium and heavy trucks inv...

Estimating statewide truck trips using commodity flows and input-output coefficients

DOT National Transportation Integrated Search

2000-04-01

This study uses commodity flows from the 1993 Commodity Flow Survey (CFS) together with Input-Output (I-O) coefficients to generate truck : flows for the state of Wisconsin. Production and attraction rates in tons, for the heavy truck mode only, were...

Trucks involved in fatal accidents codebook 2010 (Version October 22, 2012).

DOT National Transportation Integrated Search

2012-11-01

This report provides documentation for UMTRIs file of Trucks Involved in Fatal Accidents : (TIFA), 2010, including distributions of the code values for each variable in the file. The 2010 : TIFA file is a census of all medium and heavy trucks invo...

An investigation of site effeects on roadside measurement of truck noise

DOT National Transportation Integrated Search

1977-01-31

Multi-microphone measurements of the passby noise emissions from three dedicated multi-axle trucks and from transient trucking were made at nine highway sites and one standard (SAE-J366b) measuring site. Measurements were made in and around Fort Wayn...

The association between adolescent entry into the trucking industry and risk of HIV among long-distance truck drivers in India.

PubMed

Mishra, Ram Manohar; Dube, Madhulika; Saggurti, Niranjan; Pandey, Arvind; Mahapatra, Bidhubhusan; Ramesh, Sowmya

2012-01-01

This study examines the relationship between entry into the trucking industry during adolescence and both sexually transmitted infections (STIs) and infection by the human immunodeficiency virus (HIV) among long-distance truck drivers in India. Data were sourced from a cross-sectional survey (sample size: 2066) undertaken in 2007 among long-distance truck drivers. The survey spread across major transshipment locations covering the bulk of India's transport volume along four routes. Participants were interviewed about sexual behaviors and were tested for HIV and STIs. The present authors constructed two synthetic cohorts based on the participants' duration of employment in the trucking industry: (1) low (duration ≤ 6 years) and (2) high experience (duration ≥ 7 years). Based on age at entry into the trucking industry, participants were termed as either adolescent (age at entry < 18 complete years) or adult entrants (age at entry ≥ 18 complete years). In the low-experience cohort, the adolescent entrants were more likely than the adult entrants to have sex with paid female partners (42.6% versus 27.2%, respectively; adjusted odds ratio [OR]: 1.9; 95% confidence interval [CI]: 1.3-2.9) and to practice inconsistent condom use with such partners (69.1% versus 26.8%, respectively; adjusted OR: 5.3; 95% CI: 2.4-11.6). However, no significant differences were found in STI and HIV prevalence between the adolescent and the adult entrants in this cohort. In the high-experience cohort, the adolescent entrants were about two times more likely than the adult entrants to practice inconsistent condom use with paid female partners (38.5% versus 26.7%, respectively; adjusted OR: 1.7; 95% CI: 1.1-2.8) and to test positive for HIV (7.4% versus 4.0%, respectively; adjusted OR: 1.9; 95% CI: 1.2-3.1) and syphilis (5.7% versus 3.5%, respectively; adjusted OR: 1.8; 95% CI: 1.1-3.1). These results suggest the need for focused behavioral change programs in HIV prevention interventions

Statewide heavy-truck crash assessment.

DOT National Transportation Integrated Search

2014-09-01

In 2010, 16.5 percent of all fatal vehicle crashes in Iowa involved large trucks compared to the national average of 7.8 percent. Only : about 16 percent of these fatalities involved the occupants of the heavy vehicles, meaning that a majority of the...

Real Driving NOx Emissions of European Trucks and Detection of Manipulated Emission Systems

NASA Astrophysics Data System (ADS)

Pöhler, Denis; Adler, Tim; Krufczik, Chsristopher; Horbanski, Martin; Lampel, Johannes; Platt, Ulrich

2017-04-01

Nitrogen dioxide (NO2) is the most problematic pollutant in Europe and many other countries. NO2 has a negative impact for the health and the environment, and in most European cities the currently allowed mean annual limit of 40μg/m3 is exceeded. Vehicles, especially Diesel, are the most relevant source. They emit NOx (NO + NO2), and NO can also be converted to NO2 in the atmosphere. Thus vehicle NOx emissions are regulated in the EU with the EURO Norm Standard (e.g. EURO 6 since 1.1.2013 for trucks with 400mg/kWh). Trucks achieve these low emissions with complex emission after treatment systems. All EURO 6 trucks and almost all EURO 5 trucks use the SCR system consuming AdBlue to reduce the NOx emissions. Since the diesel emission scandal for cars, it is well known that real driving emissions (RDE) can be several times higher that the EURO Norm Standard. The main problem is that RDE are only randomly investigated. Here we present a study of NOx RDE of more than 250 randomly chosen trucks on German highways. The measurements were performed with a newly developed mobile NOx-ICAD + CO2 -instrument applying the plume chasing measurement principle, where the pollutants are investigated in the emission plume and were converted to emission factors to be compared to the EURO standard. For most trucks the brand, the model name, the country of registration and its EURO class could be determined and used in a statistical analysis. The observed NOx emission data show that typical truck RDE are in the range of the expected EURO Norm or slightly higher. However, almost every fourth truck from Eastern Europe show emissions much higher that the EURO Norm. This was not observed for German trucks. As the emissions increase up to a factor of 5 to 10 these view trucks contribute significantly to the air pollution. These high emissions clearly indicate a defect emission treatment system. Most likely it indicates illegal manipulated emissions systems where the AdBlue injection is

Analysis of frame structure of medium and small truck crane

NASA Astrophysics Data System (ADS)

Cao, Fuyi; Li, Jinlong; Cui, Mengkai

2018-03-01

Truck crane is an important part of hoisting machinery. Frame, as the support component of the quality of truck crane, determines the safety of crane jib load and the rationality of structural design. In this paper, the truck crane frame is a box structure, the three-dimensional model is established in CATIA software, and imported into Hyperworks software for finite element analysis. On the base of doing constraints and loads for the finite element model of the frame, the finite element static analysis is carried out. And the static stress test verifies whether the finite element model and the frame structure design are reasonable; then the free modal analysis of the frame and the analysis of the first 8 - order modal vibration deformation are carried out. The analysis results show that the maximum stress value of the frame is greater than the yield limit value of the material, and the low-order modal value is close to the excitation frequency value, which needs to be improved to provide theoretical reference for the structural design of the truck crane frame.

Trucking and Size and Weight Regulations in the Mid-Continent Corridor

DOT National Transportation Integrated Search

1996-11-01

This thesis is an empirical analysis of trucking and truck size and weight (TS&W) regulations in the Mid-continent corridor. Based on this analysis, it compares and contrasts plausible near term TS&W policy options relating to this corridor. The appr...

Estimation of truck volumes and flows

DOT National Transportation Integrated Search

2004-08-01

This research presents a statistical approach for estimating truck volumes, based : primarily on classification counts and information on roadway functionality, employment, : sales volume and number of establishments within the state. Models have bee...

Fatal injuries caused by logs rolling off trucks: Kentucky 1994-1998.

PubMed

Struttmann, T W; Scheerer, A L

2001-02-01

Logging is one of the most hazardous occupations and fatality rates are consistently among the highest of all industries. A review of fatalities caused by logs rolling off trucks is presented. The Kentucky Fatality Assessment and Control Evaluation Project is a statewide surveillance system for occupational fatalities. Investigations are conducted on selected injuries with an emphasis on prevention strategy development. Logging was an area of high priority for case investigation. During 1994-1998, we identified seven incidents in which a worker was killed by a log rolling off a truck at a sawmill, accounting for 15% of the 45 deaths related to logging activities. These cases were reviewed to identify similar characteristics and risk factors. Investigations led to recommendations for behavioral, administrative, and engineering controls. Potential interventions include limiting load height on trucks, installing unloading cages at sawmills and prohibiting overloaded trucks on public roadways. Copyright 2001 Wiley-Liss, Inc.

Whole-body vibration exposure of haul truck drivers at a surface coal mine.

PubMed

Wolfgang, Rebecca; Burgess-Limerick, Robin

2014-11-01

Haul truck drivers at surface mines are exposed to whole-body vibration for extended periods. Thirty-two whole-body vibration measurements were gathered from haul trucks under a range of normal operating conditions. Measurements taken from 30 of the 32 trucks fell within the health guidance caution zone defined by ISO2631-1 for an 8 h daily exposure suggesting, according to ISO2631-1, that "caution with respect to potential health risks is indicated". Maintained roadways were associated with substantially lower vibration amplitudes. Larger trucks were associated with lower vibration levels than small trucks. The descriptive nature of the research, and small sample size, prevents any strong conclusion regarding causal links. Further investigation of the variables associated with elevated vibration levels is justified. The operators of mining equipment such as haul trucks are exposed to whole-body vibration amplitudes which have potential to lead to long term health effects. Systematic whole-body vibration measurements taken at frequent intervals are required to provide an understanding of the causes of elevated vibration levels and hence determine appropriate control measures. Copyright © 2014 Elsevier Ltd and The Ergonomics Society. All rights reserved.

Trucks involved in fatal accidents codebook 1999 (version September 19, 2001)

DOT National Transportation Integrated Search

2001-09-01

This report provides one-way frequencies for all the vehicles in UMTRI's file of Trucks Involved in Fatal Accidents (TIFA), 1999. The 1999 TIFA file is a census of all medium and heavy trucks involved in a fatal accident in the United States. The TIF...

Glider kits cut truck ownership costs

DOE Office of Scientific and Technical Information (OSTI.GOV)

Smiley, C.H.

1983-06-01

A glider kit consists of a new truck without the power train, with the customer supplying the engine, transmission, clutch, driveline and rear axles for mounting in a new frame and cab complete with steering axle, wiring harnesses, exhaust system and cooling system. Glider kits have long been regarded as a cost effective means of replacing accident or fire damaged late model vehicles. The financial advantages, assembly and remanufacturing are discussed. Points out that at a basic cost about one third of a new truck, a glider kit offers lower cost of borrowed capital, tax savings, and elimination of highmore » maintenance and downtime costs. The paper concludes that use of glider kits as an alternative to major repair or reconditioning or outright replacement of coal haulers presents some interesting options.« less

Carbon monoxide poisoning in children riding in the back of pickup trucks.

PubMed

Hampson, N B; Norkool, D M

OBJECTIVE - To describe the case characteristics of a series of children poisoned with carbon monoxide while traveling in the back of pickup trucks. DESIGN - Pediatric cases referred for treatment of carbon monoxide poisoning with hyperbaric oxygen between 1986 and 1991 were reviewed. Those cases that occurred during travel in the back of pickup trucks were selected. Clinical follow-up by telephone interview ranged from 2 to 55 months. SETTING - A private, urban, tertiary care center in Seattle, Wash. PATIENTS - Twenty children ranging from 4 to 16 years of age. INTERVENTION - All patients were treated with hyperbaric oxygen. MAIN OUTCOME MEASURES - Characteristics of the poisoning incident and clinical patient outcome. RESULTS - Of 68 pediatric patients treated for accidental carbon monoxide poisoning, 20 cases occurred as children rode in the back of pickup trucks. In 17 of these, the children were riding under a rigid closed canopy on the rear of the truck, while three episodes occurred as children rode beneath a tarpaulin. Average carboxyhemoglobin level on emergency department presentation was 18.2% +/- 2.4% (mean +/- SEM; range, 1.6% to 37.0%). Loss of consciousness occurred in 15 of the 20 children. One child died of cerebral edema, one had permanent neurologic deficits, and 18 had no recognizable sequelae related to the episode. In all cases, the truck exhaust system had a previously known leak or a tail pipe that exited at the rear rather than at the side of the pickup truck. CONCLUSIONS - Carbon monoxide poisoning is a significant hazard for children who ride in the back of pickup trucks. If possible, this practice should be avoided.

49 CFR 176.78 - Use of power-operated industrial trucks on board vessels.

Code of Federal Regulations, 2011 CFR

2011-10-01

...) Refueling. (1) A truck using gasoline as fuel may not be refueled in the hold or on the weather deck of a... truck using liquefied petroleum gas as fuel may not be refueled in the hold or on the weather deck of a... truck using diesel oil as fuel may not be refueled on the weather deck or in the hold of a vessel unless...

49 CFR 176.78 - Use of power-operated industrial trucks on board vessels.

Code of Federal Regulations, 2010 CFR

2010-10-01

...) Refueling. (1) A truck using gasoline as fuel may not be refueled in the hold or on the weather deck of a... truck using liquefied petroleum gas as fuel may not be refueled in the hold or on the weather deck of a... truck using diesel oil as fuel may not be refueled on the weather deck or in the hold of a vessel unless...

Crash avoidance potential of four large truck technologies.

PubMed

Jermakian, Jessica S

2012-11-01

The objective of this paper was to estimate the maximum potential large truck crash reductions in the United States associated with each of four crash avoidance technologies: side view assist, forward collision warning/mitigation, lane departure warning/prevention, and vehicle stability control. Estimates accounted for limitations of current systems. Crash records were extracted from the 2004-08 files of the National Automotive Sampling System General Estimates System (NASS GES) and the Fatality Analysis Reporting System (FARS). Crash descriptors such as location of damage on the vehicle, road characteristics, time of day, and precrash maneuvers were reviewed to determine whether the information or action provided by each technology potentially could have prevented the crash. Of the four technologies, side view assist had the greatest potential for preventing large truck crashes of any severity; the technology is potentially applicable to 39,000 crashes in the United States each year, including 2000 serious and moderate injury crashes and 79 fatal crashes. Vehicle stability control is another promising technology, with the potential to prevent or mitigate up to 31,000 crashes per year including more serious crashes--up to 7000 moderate-to-serious injury crashes and 439 fatal crashes per year. Vehicle stability control could prevent or mitigate up to 20 and 11 percent of moderate-to-serious injury and fatal large truck crashes, respectively. Forward collision warning has the potential to prevent as many as 31,000 crashes per year, including 3000 serious and moderate injury crashes and 115 fatal crashes. Finally, 10,000 large truck crashes annually were relevant to lane departure warning/prevention systems. Of these, 1000 involved serious and moderate injuries and 247 involved fatal injuries. There is great potential effectiveness for truck-based crash avoidance systems. However, it is yet to be determined how drivers will interact with the systems. Actual

Performance of a logging truck with a central tire inflation system.

Treesearch

John A. Sturos; Douglas B. Brumm; Andrew Lehto

1995-01-01

Describes the performance of an 11-axle logging truck with a central tire inflation system. Results included reduced damages to roads, improved ride of the truck, improved drawbar pull, and reduced rolling resistance. Road construction costs were reduced 62%, primarily due to using 33% less gravel.

77 FR 75257 - Proposed Collection of Information: Medium- and Heavy-Duty Truck Fleet Survey

Federal Register 2010, 2011, 2012, 2013, 2014

2012-12-19

...-0170] Proposed Collection of Information: Medium- and Heavy-Duty Truck Fleet Survey AGENCY: National... collection of information will be in the form of a one-time survey of medium- and heavy-duty truck fleet... collection. OMB Control Number: To be issued at time of approval. Title: Medium- and Heavy-Duty Truck Fleet...

Estimation of the demand for commercial truck parking on interstate highways in Virginia : final report.

DOT National Transportation Integrated Search

2004-01-01

The steady growth of commercial truck travel has led to an increasing demand for truck parking spaces at public rest areas and private truck stops on interstate highways in Virginia. This study developed a methodology to determine the supply and dema...

NC truck network model development research.

DOT National Transportation Integrated Search

2008-09-01

This research develops a validated prototype truck traffic network model for North Carolina. The model : includes all counties and metropolitan areas of North Carolina and major economic areas throughout the : U.S. Geographic boundaries, population a...

US Hybrid Bucket Truck APM Phase I Final Scientific Technical Report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Goodarzi, Abas

Presently, there are approximately 166,000 medium- and heavy-duty (MD/HD) bucket trucks operating in the United States, the majority of which are diesel powered. These vehicles spend a significant amount of time idling at the work site to power the truck’s hydraulic boom, lights, auxiliary equipment, and cabin heating and cooling. Nationally, bucket trucks use 0.5 billion gallons of diesel fuel annually, representing 1.5 percent of the U.S.’s total diesel fuel consumption [ ]. Increasing fuel costs and environmental concerns are driving efforts to develop cleaner, quieter, more productive, and more energy efficient bucket trucks. The emissions of the bucket truckmore » have a direct effect on public health. Bucket trucks operation mode imposes heavy loads on the powertrain and results in very poor fuel efficiency and high emissions. Electric powertrains perform well in such conditions, and in recent years, a number of initiatives have been launched to explore the potential of fuel cell electric systems for bucket truck propulsion. The proposed fuel cell powered ePTO offers the best ROI and compatibility with the existing vehicles and operation and also minimized the infrastructure need. To address these problems, US Hybrid Corporation has teamed with Hawaii Center for Advanced Transportation Technologies (HCATT) and Hawaii Natural Energy Institute (HNEI) and Hawaiian Electric Company (HECO) to perform a Phase I analysis on the development and deployment of a fuel cell powered bucket truck (FCBT) for operation by HECO within the City and County of Honolulu. Based on preliminary modeling of a typical bucket truck operation, it is anticipated that the fuel cell powertrain will provide a 200% fuel economy improvement with zero emissions job-site operation and lower operating noise. The zero-emission ePTO bucket truck will also support the Greenhouse Gas (GHG) emission goals set forth by the federal government as well as the State of Hawaii. The operators within

Alternative Fuels Data Center: Maryland Conserves Fuel With Hybrid Trucks

Science.gov Websites

reducing fuel consumption, engine noise, and greenhouse gas emissions with hybrid trucks. For information of a car Electric Vehicles Charge up at State Parks in West Virginia Dec. 9, 2017 Photo of a car Smart Car Shopping Nov. 4, 2017 Photo of a truck Natural Gas Vehicles Make a Difference in Tennessee Oct

Work related injuries in Washington State's Trucking Industry, by industry sector and occupation.

PubMed

Smith, Caroline K; Williams, Jena

2014-04-01

The trucking industry continues to have some of the highest work-related injury and illness rates and costs of any industry in the United States. Until recently, little focus has been placed on addressing non-motor vehicle collision related injuries within the trucking industry. Drivers are exposed to multiple physical risk factors that contribute to occupational injuries in order to complete their job duties, such as loading/unloading freight, decoupling trailers, strapping down loads and ingress and egress from the cab and trailer. About one-fourth of all truck driver injuries in the United States are related to slips, trips, and falls near the truck. The purpose of this descriptive study is to report on recent injuries in the trucking industry in Washington State. Data are presented by occupation and industry sector, in order to better understand the magnitude of specific injuries in terms of time-loss days and workers' compensation costs. All accepted, compensable (time-loss) claims from 2005 to 2010 within the trucking industry in Washington State were reviewed. Counts, rates, median and quartile data are presented. Logistic regression models are presented to identify factors associated with more severe claims. Non-traumatic musculoskeletal disorders of the neck, back and upper extremities are the most frequent injuries across all industry sectors and occupations in the trucking industry. Vehicle related claims had the highest median costs and time loss days and Courier and Messenger claims had the highest risk for higher time loss claims. Injuries varied substantially by sector and within sectors by occupation. It is important to review work-related injuries within the trucking industry by sector and occupation in order to maximize limited resources for injury prevention within this important sector. Copyright © 2014 The Authors. Published by Elsevier Ltd.. All rights reserved.

Commercial truck parking detection technology evaluation for Columbia County rest areas [summary].

DOT National Transportation Integrated Search

2016-12-01

Rest areas along Floridas interstate highways are heavily used by commercial trucks for overnight parking. Many rest areas regularly experience 100% utilization of the commercial truck parking spaces during the evening and early morning hours. Dri...

29 CFR 570.129 - Limited driving of automobiles and trucks by 17-year-olds.

Code of Federal Regulations, 2013 CFR

2013-07-01

... 29 Labor 3 2013-07-01 2013-07-01 false Limited driving of automobiles and trucks by 17-year-olds... Amended Exemptions § 570.129 Limited driving of automobiles and trucks by 17-year-olds. Section 13(c)(6... employment, perform the occasional and incidental driving of automobiles and trucks on public highways under...

29 CFR 570.129 - Limited driving of automobiles and trucks by 17-year-olds.

Code of Federal Regulations, 2012 CFR

2012-07-01

... 29 Labor 3 2012-07-01 2012-07-01 false Limited driving of automobiles and trucks by 17-year-olds... Amended Exemptions § 570.129 Limited driving of automobiles and trucks by 17-year-olds. Section 13(c)(6... employment, perform the occasional and incidental driving of automobiles and trucks on public highways under...

29 CFR 570.129 - Limited driving of automobiles and trucks by 17-year-olds.

Code of Federal Regulations, 2011 CFR

2011-07-01

... 29 Labor 3 2011-07-01 2011-07-01 false Limited driving of automobiles and trucks by 17-year-olds... Amended Exemptions § 570.129 Limited driving of automobiles and trucks by 17-year-olds. Section 13(c)(6... employment, perform the occasional and incidental driving of automobiles and trucks on public highways under...

29 CFR 570.129 - Limited driving of automobiles and trucks by 17-year-olds.

Code of Federal Regulations, 2014 CFR

2014-07-01

... 29 Labor 3 2014-07-01 2014-07-01 false Limited driving of automobiles and trucks by 17-year-olds... Amended Exemptions § 570.129 Limited driving of automobiles and trucks by 17-year-olds. Section 13(c)(6... employment, perform the occasional and incidental driving of automobiles and trucks on public highways under...

Geometric design and operational factors that impact truck use of toll roads.

DOT National Transportation Integrated Search

2010-09-01

This purpose of this project was to identify the potential factors that could impact truck use of toll roads or : managed lanes. The researchers outlined the trucking and freight industry needs through synthesis of : existing literature. Identificati...

Evaluation of large-truck fixed-object crashes at bridge structures in Kansas.

DOT National Transportation Integrated Search

2012-12-01

The aim of this study was to investigate any possible relationships between roadway geometry, pavement conditions, and : large-truck, fixed object crashes at bridge sites. Data on single-vehicle and multiple-vehicle large-truck crashes were : extract...

Underride safety protection: benefit-cost assessment of rear-impact guards for the North Dakota farm truck fleet.

PubMed

Vachal, Kimberly; Tumuhairwe, Esther K; Berwick, Mark

2009-04-01

The North Dakota Legislature recently passed a law exempting the state's agricultural truck fleet from a federal safety program requirement for rear-guard equipment on large trucks. This equipment has been shown to reduce crash severity when a passenger vehicle collides with the rear of the truck. This study uses truck fleet, truck crash, and injury severity data to estimate the public safety benefit derived from passenger-vehicle underride protection during rear-end crashes involving large agricultural trucks in North Dakota. A benefit-cost analysis of crash injury avoidance is developed based on the frequency and severity of rear-end truck collisions in North Dakota between 2001 and 2007. The injury avoidance benefits and commercial vehicle safety grant benefits are estimated to be $11.4 to $20.2 million during the seven-year depreciable truck life. The public safety benefits for rear-impact guards are higher than the estimated lifetime cost for the equipment and maintenance of $8.1 million.

Truck Noise IX : Noise Reduction Study of an In-Service Diesel-Powered Truck : Volume 1. Text.

DOT National Transportation Integrated Search

1977-02-01

A series of tests to measure the noise contributions of subsystems were performed on a truck with a conventional short cab, equipped with a Cummins V-903 engine. The data acquired in these tests were used to select retrofittable components which woul...

Truck Noise IX : Noise Reduction Study of an In-Service Diesel Powered Truck : Volume 2. Appendix.

DOT National Transportation Integrated Search

1977-02-01

A series of tests to measure the noise contributions of subsystems were performed on a truck with a conventional short cab, equipped with a Cummins V-903 engine. The data acquired in these tests were used to select retrofittable components which woul...

Toxoplasma gondii infection in interstate truck drivers: a case-control seroprevalence study.

PubMed

Alvarado-Esquivel, Cosme; Pacheco-Vega, Sandy Janet; Hernández-Tinoco, Jesús; Salcedo-Jáquez, Misael; Sánchez-Anguiano, Luis Francisco; Berumen-Segovia, Luis Omar; Rábago-Sánchez, Elizabeth; Liesenfeld, Oliver

2015-02-05

Infection with Toxoplasma gondii can be acquired via the ingestion of undercooked or raw meat containing tissue cysts, or via ingestion of water contaminated with oocysts. Professional long distance truck driving may have epidemiological importance for food-borne infections since drivers eat out of home and in places where hygiene and cooking practices are uncertain. We aimed to determine whether interstate truck drivers in Durango, Mexico have an increased risk of infection with T. gondii as indicated by seropositivity; and to determine the socio-demographic, work, clinical, and behavioral characteristics associated with T. gondii seropositivity in interstate truck drivers. Through a case-control study design, 192 truck drivers and 192 controls from the general population of the same region matched by gender and age were examined with enzyme-linked immunoassays for the presence of anti-Toxoplasma IgG and IgM antibodies. Socio-demographic, work, clinical and behavioral characteristics from the truck drivers were obtained. Anti-T. gondii IgG antibodies were found in 23 (12.0%) of 192 truck drivers and in 13 (6.8%) of 192 controls (OR = 21.0; 95% CI: 1.23-358.38; P = 0.002). Anti-T. gondii IgM antibodies were found in 7 (3.6%) cases and in 7 (3.6%) controls (P = 1.00). The seroprevalence of T. gondii infection was higher in drivers with reflex impairment than in those without this impairment (4/13, 30.8% vs 19/179, 10.6%, respectively; P = 0.05), and in drivers with hearing impairment than in those without this impairment (3/7, 42.9% vs 20/185, 10.8%, respectively; P = 0.03). Multivariate analysis of work and behavioral characteristics of truck drives showed positive associations of T. gondii exposure with trips to the south of Mexico (OR = 3.11; 95% CI: 1.02-9.44; P = 0.04) and consumption of horse meat (OR = 5.18; 95% CI: 1.62-16.55; P = 0.005). Results suggest that interstate truck drivers may have an increased risk for T

Effects of After-Treatment Control Technologies on Heavy-Duty Diesel Truck Emissions

NASA Astrophysics Data System (ADS)

Preble, C.; Dallmann, T. R.; Kreisberg, N. M.; Hering, S. V.; Harley, R.; Kirchstetter, T.

2015-12-01

Diesel engines are major emitters of nitrogen oxides (NOx) and the black carbon (BC) fraction of particulate matter (PM). Diesel particle filter (DPF) and selective catalytic reduction (SCR) emission control systems that target exhaust PM and NOx have recently become standard on new heavy-duty diesel trucks (HDDT). There is concern that DPFs may increase ultrafine particle (UFP) and total particle number (PN) emissions while reducing PM mass emissions. Also, the deliberate catalytic oxidation of engine-out NO to NO2 in continuously regenerating DPFs may lead to increased tailpipe emission of NO2 and near-roadway concentrations that exceed the 1-hr national ambient air quality standard. Increased NO2 emissions can also promote formation of ozone and secondary PM. We report results from ongoing on-road studies of HDDT emissions at the Port of Oakland and the Caldecott Tunnel in California's San Francisco Bay Area. Emission factors (g pollutant per kg diesel) were linked via recorded license plates to each truck's engine model year and installed emission controls. At both sites, DPF use significantly increased the NO2/NOx emission ratio. DPFs also significantly increased NO2 emissions when installed as retrofits on older trucks with higher baseline NOx emissions. While SCR systems on new trucks effectively reduce total NOx emissions and mitigate these undesirable DPF-related NO2 emissions, they also lead to significant emission of N2O, a potent greenhouse gas. When expressed on a CO2-equivalent basis, the N2O emissions increase offsets the fuel economy gain (i.e., the CO2 emission reduction) associated with SCR use. At the Port, average NOx, BC and PN emission factors from new trucks equipped with DPF and SCR were 69 ± 15%, 92 ± 32% and 66 ± 35% lower, respectively, than modern trucks without these emission controls. In contrast, at the Tunnel, PN emissions from older trucks retrofit with DPFs were ~2 times greater than modern trucks without DPFs. The difference

Light Duty Truck Weight Reduction Evaluation

DOT National Transportation Integrated Search

1980-10-01

The objectives of this program were to identify the weight reduction potential of pickup trucks, vans, and utility vehicles less than or equal to 8500 lb. gross vehicle weight through design modification, redesign, and material substitution; and more...

Rail Passenger Vehicle Truck Design Methodology

DOT National Transportation Integrated Search

1981-01-01

A procedure for the selection of rail passenger truck design parameters to meet dynamic performance indices has been developed. The procedure is based upon partitioning the design task into three tradeoff studies: (1) a vertical ride quality-secondar...

Trucking in Georgia : freight performance measures.

DOT National Transportation Integrated Search

2011-11-16

This report provides a review of the recent literature on the development of truck freight performance measures, : and specifically measures that can assist the Georgia Department of Transportation in assessing, and in tracking : from year to year, h...

Active living in the trucking sector: environmental barriers and health promotion strategies.

PubMed

Apostolopoulos, Yorghos; Shattell, Mona M; Sönmez, Sevil; Strack, Robert; Haldeman, Lauren; Jones, Victoria

2012-02-01

As one of the most underserved segments of the U.S. labor force, truck drivers have been associated with a series of morbid conditions intimately linked to their occupational milieux, their mostly unhealthful nutritional intake and sedentary lifestyles, and their resulting excess weight-gain. This paper reports data from a baseline assessment of 25 trucking work settings located around interstate highways I-40 and I-85 in North Carolina. It examines how the environmental attributes of these work settings influence the physical and recreational activity behaviors of truckers, compares findings with those from other occupational environments, and brings to the fore a new health promotion paradigm for trucking worksites. Findings support growing empirical and anecdotal evidence that trucking work settings remain not only active-living deserts, but overall unhealthful places. A scan of physical, social, and information environments within trucking worksites as well as physical environments of surrounding communities reveal only meager opportunities for physical and recreational activity for truckers. This paper places the highly underserved population of truckers firmly within the discourse of worksite health promotion, and calls for comprehensive multistakeholder wellness strategies that address a multitude of risk factors linked to the occupational context.

26 CFR 48.4052-1 - Heavy trucks and trailers; certification requirement.

Code of Federal Regulations, 2010 CFR

2010-04-01

... 26 Internal Revenue 16 2010-04-01 2010-04-01 true Heavy trucks and trailers; certification requirement. 48.4052-1 Section 48.4052-1 Internal Revenue INTERNAL REVENUE SERVICE, DEPARTMENT OF THE TREASURY..., Tread Rubber, and Taxable Fuel Automotive and Related Items § 48.4052-1 Heavy trucks and trailers...

Truck side guard specifications : recommended standard

DOT National Transportation Integrated Search

2016-09-01

This document is intended to be used by (1) public or private medium/heavy-duty truck fleets considering adding side guards; (2) jurisdictions or customers that require side guards through policy or procurement; (3) manufacturers of side guards; and ...

Truck and bus driver task analysis

DOT National Transportation Integrated Search

1973-05-01

This report describes the tasks involved in driving large trucks and buses. The task descriptions are an extension of the task description developed by Human Resources Research Organization (HumRRO) for passenger car drivers and deal with those uniqu...

Comparing Gravimetric and Real-Time Sampling of PM2.5 Concentrations Inside Truck Cabins

PubMed Central

Zhu, Ying; Smith, Thomas J.; Davis, Mary E.; Levy, Jonathan I.; Herrick, Robert; Jiang, Hongyu

2012-01-01

As part of a study on truck drivers’ exposure and health risk, pickup and delivery (P&D) truck drivers’ on-road exposure patterns to PM2.5 were assessed in five weeklong sampling trips in metropolitan areas of five U.S. cities from April to August of 2006. Drivers were sampled with real-time (DustTrak) and gravimetric samplers to measure average in-cabin PM2.5 concentrations and to compare their correspondence in moving trucks. In addition, GPS measurements of truck locations, meteorological data, and driver behavioral data were collected throughout the day to determine which factors influence the relationship between real-time and gravimetric samplers. Results indicate that the association between average real-time and gravimetric PM2.5 measurements on moving trucks was fairly consistent (Spearman rank correlation of 0.63), with DustTrak measurements exceeding gravimetric measurements by approximately a factor of 2. This ratio differed significantly only between the industrial Midwest cities and the other three sampled cities scattered in the South and West. There was also limited evidence of an effect of truck age. Filter samples collected concurrently with DustTrak measurements can be used to calibrate average mass concentration responses for the DustTrak, allowing for real-time measurements to be integrated into longer-term studies of inter-city and intra-urban exposure patterns for truck drivers. PMID:21991940

Comparing gravimetric and real-time sampling of PM(2.5) concentrations inside truck cabins.

PubMed

Zhu, Ying; Smith, Thomas J; Davis, Mary E; Levy, Jonathan I; Herrick, Robert; Jiang, Hongyu

2011-11-01

As part of a study on truck drivers' exposure and health risk, pickup and delivery (P&D) truck drivers' on-road exposure patterns to PM(2.5) were assessed in five, weeklong sampling trips in metropolitan areas of five U.S. cities from April to August of 2006. Drivers were sampled with real-time (DustTrak) and gravimetric samplers to measure average in-cabin PM(2.5) concentrations and to compare their correspondence in moving trucks. In addition, GPS measurements of truck locations, meteorological data, and driver behavioral data were collected throughout the day to determine which factors influence the relationship between real-time and gravimetric samplers. Results indicate that the association between average real-time and gravimetric PM(2.5) measurements on moving trucks was fairly consistent (Spearman rank correlation of 0.63), with DustTrak measurements exceeding gravimetric measurements by approximately a factor of 2. This ratio differed significantly only between the industrial Midwest cities and the other three sampled cities scattered in the South and West. There was also limited evidence of an effect of truck age. Filter samples collected concurrently with DustTrak measurements can be used to calibrate average mass concentration responses for the DustTrak, allowing for real-time measurements to be integrated into longer-term studies of inter-city and intra-urban exposure patterns for truck drivers.

Truck Noise X : Noise Reduction Options for Diesel Powered International Harvester Trucks : Volume 1. Development Work.

DOT National Transportation Integrated Search

1977-04-01

Noise reduction option development work was carried out on two inservice diesel powered IH trucks, consisting of a Cab-over model and a Conventional model with a baseline exterior noise level of 87 dB(A) each. Since no specific noise goals were set, ...

Traffic and geometric characteristics affecting the involvement of large trucks in accidents.

DOT National Transportation Integrated Search

1991-01-01

Recent trends indicate that vehicle miles traveled for large trucks is increasing at a higher rate than for other vehicles. The resulting competition between large trucks and other vehicles for highway space can be expected to result in more multi-ve...

Weight Reduction Potential of Automobiles and Light Trucks: 1980 Summary Source Document

DOT National Transportation Integrated Search

1981-06-01

This report provides an assessment of the potential of weight reduction for passenger cars and light trucks (including pickup trucks, vans, and utility vehicles of GVWR up to 8500 pounds) in the post-1985 period. Vehicle characteristics and weight re...

Field and modeling framework and case study of truck weigh station operations

DOT National Transportation Integrated Search

2002-01-01

Weigh-in-Motion (WIM) systems improve the capacity of weigh station operations significantly by screening trucks while traveling at high speeds and only requiring trucks within a threshold of a maximum permissible gross of axle weight to be weighed o...

Statistical analysis of heavy truck loads using Wisconsin weigh-in-motion data

DOT National Transportation Integrated Search

2009-09-01

This study involved statistical evaluation of heavy truck loads that were recorded in 2007 using Weigh-In-Motion : stations located throughout the State of Wisconsin. The heaviest 5% of all trucks in each class and axle groupings were : selected for ...

Transportation of market-weight pigs: I. effect of season, truck type, and location within truck on behavior with a two-hour transport.

PubMed

Torrey, S; Bergeron, R; Widowski, T; Lewis, N; Crowe, T; Correa, J A; Brown, J; Gonyou, H W; Faucitano, L

2013-06-01

There is evidence that season and truck/trailer design play important roles in pig welfare during transportation although little is known about their interaction and effect on pig behavior. This experiment was designed to examine the influence of season and truck/trailer design on the behavior during loading, transit, unloading, and lairage of market-weight pigs transported to slaughter. A total of 3,756 pigs were transported on either a 3-deck pot-belly trailer (PB; n = 181 pigs/wk in 8 experimental compartments) or a double-decker hydraulic truck (DD; n = 85 pigs/wk in 4 compartments) for 2 h to a commercial abattoir in summer and winter (6 wk in each season). Density on both vehicles was 0.40 m(2)/pig. Accounting for the number of pigs, loading took longer (P = 0.033) onto the DD than the PB, but season did not (P = 0.571) influence loading time. Pigs loaded onto the PB moved backward more (P = 0.003) frequently than those loaded onto the DD. The frequency of tapping by handler was the lone handling intervention affected by truck type, with more (P = 0.014) tapping needed to move pigs on and off DD than PB. During loading, pigs made more (P < 0.001) slips and falls, overlaps, 180° turns, underlaps, and vocalizations in winter compared with summer. On truck, more (P < 0.001) pigs were standing on the DD at the farm and in transit than on the PB whereas more (P = 0.012) pigs were lying in transit in summer than in winter. Pigs took longer to unload (P < 0.001) from the PB than the DD, but no difference between vehicles (P = 0.473) in latency to rest in lairage was found. Pigs slipped and fell more (P < 0.001) during unloading, took longer (P < 0.001) to unload, and had a shorter (P = 0.006) latency to rest in lairage in winter than summer. Vehicle design, in particular the presence of ramps, influenced pig behavior before, during, and after transportation, regardless of the season. Season affected loading and unloading behavior, especially in terms of slips and

Rolling Resistance of Light Truck Tires

DOT National Transportation Integrated Search

1981-01-01

The supplement contains carpet plots of 44 light truck tires giving rolling resistance versus load and reciprocal of inflation pressure. The plots represent measured data. To avoid the expense of taking measurements at all points on the plots, an equ...

Mixed Integer Programming Model and Incremental Optimization for Delivery and Storage Planning Using Truck Terminals

NASA Astrophysics Data System (ADS)

Sakakibara, Kazutoshi; Tian, Yajie; Nishikawa, Ikuko

We discuss the planning of transportation by trucks over a multi-day period. Each truck collects loads from suppliers and delivers them to assembly plants or a truck terminal. By exploiting the truck terminal as a temporal storage, we aim to increase the load ratio of each truck and to minimize the lead time for transportation. In this paper, we show a mixed integer programming model which represents each product explicitly, and discuss the decomposition of the problem into a problem of delivery and storage, and a problem of vehicle routing. Based on this model, we propose a relax-and-fix type heuristic in which decision variables are fixed one by one by mathematical programming techniques such as branch-and-bound methods.

Analysis Of Technology Options To Reduce The Fuel Consumption Of Idling Trucks

DOT National Transportation Integrated Search

2000-06-01

Long-haul trucks idling overnight consume more than 838 million gallons (20 million barrels) of fuel annually. Idling also emits pollutants. Truck drivers idle their engines primarily to (1) heat or cool the cab and/or sleeper, (2) keep the fuel warm...

27 CFR 24.230 - Examination of tank car or tank truck.

Code of Federal Regulations, 2014 CFR

2014-04-01

... 27 Alcohol, Tobacco Products and Firearms 1 2014-04-01 2014-04-01 false Examination of tank car or... TRADE BUREAU, DEPARTMENT OF THE TREASURY ALCOHOL WINE Spirits § 24.230 Examination of tank car or tank truck. Upon arrival of a tank car or tank truck at the bonded wine premises, the proprietor shall...

27 CFR 24.230 - Examination of tank car or tank truck.

Code of Federal Regulations, 2013 CFR

2013-04-01

... 27 Alcohol, Tobacco Products and Firearms 1 2013-04-01 2013-04-01 false Examination of tank car or... TRADE BUREAU, DEPARTMENT OF THE TREASURY ALCOHOL WINE Spirits § 24.230 Examination of tank car or tank truck. Upon arrival of a tank car or tank truck at the bonded wine premises, the proprietor shall...

27 CFR 24.230 - Examination of tank car or tank truck.

Code of Federal Regulations, 2012 CFR

2012-04-01

... 27 Alcohol, Tobacco Products and Firearms 1 2012-04-01 2012-04-01 false Examination of tank car or... TRADE BUREAU, DEPARTMENT OF THE TREASURY LIQUORS WINE Spirits § 24.230 Examination of tank car or tank truck. Upon arrival of a tank car or tank truck at the bonded wine premises, the proprietor shall...

27 CFR 24.230 - Examination of tank car or tank truck.

Code of Federal Regulations, 2010 CFR

2010-04-01

... 27 Alcohol, Tobacco Products and Firearms 1 2010-04-01 2010-04-01 false Examination of tank car or... TRADE BUREAU, DEPARTMENT OF THE TREASURY LIQUORS WINE Spirits § 24.230 Examination of tank car or tank truck. Upon arrival of a tank car or tank truck at the bonded wine premises, the proprietor shall...

27 CFR 24.230 - Examination of tank car or tank truck.

Code of Federal Regulations, 2011 CFR

2011-04-01

... 27 Alcohol, Tobacco Products and Firearms 1 2011-04-01 2011-04-01 false Examination of tank car or... TRADE BUREAU, DEPARTMENT OF THE TREASURY LIQUORS WINE Spirits § 24.230 Examination of tank car or tank truck. Upon arrival of a tank car or tank truck at the bonded wine premises, the proprietor shall...

49 CFR 230.100 - Defects in tender truck axles and journals.

Code of Federal Regulations, 2010 CFR

2010-10-01

... Steam Locomotives and Tenders Running Gear § 230.100 Defects in tender truck axles and journals. (a... wheel seats that is more than 1/8 of an inch in depth. (b) Tender truck journal condemning defects... repaired : (1) Cut journals that cannot be made to run cool without turning; (2) Seams in axles causing...

Occupational Fatalities Among Driver/Sales Workers and Truck Drivers in the United States, 2003–2008

PubMed Central

Chen, Guang X.; Amandus, Harlan E.; Wu, Nan

2015-01-01

Background This study provides a national profile of occupational fatalities among truck drivers and driver-sales workers. Methods Data from the 2003–2008 Census of Fatal Occupational Injuries were used. Cases were extracted specifically for occupational subcategories included in the Driver/Sales Workers and Truck Drivers occupational category: Driver/Sales Workers, Heavy and Tractor-Trailer Truck Drivers, and Light Truck or Delivery Services Drivers. Results In 2003–2008, the group Driver/Sales Workers and Truck Drivers had 5,568 occupational fatalities, representing 17% of all occupational fatalities in the United States. The majority of these fatalities were in the subgroup Heavy and Tractor-Trailer Truck Drivers (85%) and due to transportation incidents (80%). Older and male drivers had higher fatality rates than their counterparts. Conclusions Findings suggest a need for targeted interventions to reduce highway fatalities among heavy truck drivers. Better employment data are needed to separate the three occupational subcategories by worker characteristic and employment history for use in research and prevention efforts. PMID:24811905

Light Truck Characteristics, Historical Data Base

DOT National Transportation Integrated Search

1980-11-01

The report is a description of the data about the physical, operating performance, and market characteristics of light trucks for the model years 1955 through 1977, which is stored on tape in DOT/TSC DEC System 10 computer system. Vehicles are report...

Weight Reduction Potential of Automobiles and Light Trucks, 1979 Summary Source Document

DOT National Transportation Integrated Search

1980-03-01

The purpose of this report is to provide an assessment of the potential for weight reduction for passenger cars and light trucks (including pickup trucks, vans, and utility vehicles of GVWR up to 8500 pounds) in the 1980 to 2000 model year period. Va...

Work, sleep, and cholesterol levels of U.S. long-haul truck drivers

PubMed Central

LEMKE, Michael K.; APOSTOLOPOULOS, Yorghos; HEGE, Adam; WIDEMAN, Laurie; SÖNMEZ, Sevil

2016-01-01

Long-haul truck drivers in the United States experience elevated cardiovascular health risks, possibly due to hypercholesterolemia. The current study has two objectives: 1) to generate a cholesterol profile for U.S. long-haul truck drivers; and 2) to determine the influence of work organization characteristics and sleep quality and duration on cholesterol levels of long-haul truck drivers. Survey and biometric data were collected from 262 long-haul truck drivers. Descriptive analyses were performed for demographic, work organization, sleep, and cholesterol measures. Linear regression and ordinal logistic regression analyses were conducted to examine for possible predictive relationships between demographic, work organization, and sleep variables, and cholesterol outcomes. The majority (66.4%) of drivers had a low HDL (<40 mg/dL), and nearly 42% of drivers had a high-risk total cholesterol to HDL cholesterol ratio. Sleep quality was associated with HDL, LDL, and total cholesterol, and daily work hours were associated with LDL cholesterol. Workday sleep duration was associated with non-HDL cholesterol, and driving experience and sleep quality were associated with cholesterol ratio. Long-haul truck drivers have a high risk cholesterol profile, and sleep quality and work organization factors may induce these cholesterol outcomes. Targeted worksite health promotion programs are needed to curb these atherosclerotic risks. PMID:28049935

Idling Reduction for Long-Haul Trucks: An Economic Comparison of On-Board and Wayside Technologies

DOE Office of Scientific and Technical Information (OSTI.GOV)

Gaines, Linda; Weikersheimer, Patricia

Reducing the idling of long-haul heavy-duty trucks has long been recognized as a particularly low-hanging fruit of fuel efficiency and emissions reduction. The displacement of about 10 hours of diesel idling every day, for most days of the year, for as many as a million long-haul trucks has very clear benefits. This report considers the costs and return on investment (ROI) for idling reduction (IR) equipment for both truck owners and electrified parking space (EPS) equipment owners. For the truck owners, the key variables examined are idling hours to be displaced (generally 1,000 to 2,000 hours per year) and themore » price of fuel ($0 to $5/gal). The ideal IR option would provide complete services in varied climates in any location and offer the best ROI on trucks that log many idling hours. For trucks that have fewer idling hours, options with a fixed cost per hour (i.e., EPS) might be most attractive if they were available to all, or even most, truck drivers. EPS, however, is particularly cost effective for trucks on prescribed routes with a need for regular, extended stops at terminals. (EPS is also called truck stop electrification, or TSE.) The analysis shows that all IR options save money when fuel costs more than $2/gal. For trucks requiring bunk heat, a simple heater (plug-in or diesel) is almost always the most costeffective way to provide heat, even if the truck is equipped with an auxiliary power unit (APU) or is parked at a single-system EPS location. For trucks requiring bunk air-conditioning, the use of single-system EPS is most cost effective for those logging fewer idling hours. Even for trucks with higher idling hours, the cost of EPS may be about the same as that for on-board air-conditioning. Clearly, trucks’ locations and seasonal factors—and the availability of EPS— are significant in the choice of “best fit” IR equipment for truck owners. This report also considers costs and payback for owners of EPS infrastructure. An industry

Identifying training needs of logging truck drivers using a skill inventory.

PubMed

Carnahan, B J

2004-11-01

The purpose of this research was to determine if the Driver Skill Inventory (DSI) could be used to characterize the self-assessed driving performance of commercial logging truck drivers. The DSI requires respondents to subjectively evaluate their own ability in regard to 15 different driving skills. The DSI responses of 1000 logging truck drivers were collected across three southeastern states. The underlying hypothesis in the current study was that DSI responses of these drivers would have similar reliability and factor structure as those DSI responses collected from non-commercial drivers in previous studies. Factor analysis of the data confirmed this hypothesis. Statistical analysis revealed that low self-ratings on various safety skill items within the DSI inventory were associated with: (1) inconsistency in using seat belts, (2) inconsistency in performing pre-trip inspections on logging trucks, and (3) committing moving violations. Conversely, high self-ratings ratings on various perceptual-motor skill items were associated with these same at-risk behaviors. The perceptual-motor skill items were also positively associated with negative attitudes toward driving regulations and the number of moving violations incurred over a three-year period. Non-parametric statistical analysis revealed that self-assessments were lowest for DSI skills pertaining to controlling one's anger while driving and managing the truck through a skid or slide. Results of the study confirmed that the DSI can be successfully applied to commercial logging truck drivers as part of an overall comprehensive training needs assessment.

EVALUATION OF FUEL CELL AUXILIARY POWER UNITS FOR HEAVY-DUTY DIESEL TRUCKS

EPA Science Inventory

A large number of heavy-duty trucks idle a significant amount. Heavy-duty line-haul truck engines idle about 30-50% of the time the engine is running. Drivers idle engines to power climate control devices (e.g., heaters and air conditioners) and sleeper compartment accessories (e...

Traffic safety facts 1995 : large trucks

DOT National Transportation Integrated Search

1996-01-01

In 1995, 376,000 large trucks (gross vehicle weight rating greater than 10,000 pounds) were involved in traffic crashes in the United States; 4,453 were involved in fatal crashes. A total of 4,903 people died (12 percent of all the traffic fatalities...

Traffic safety facts 1996 : large trucks

DOT National Transportation Integrated Search

1997-01-01

In 1996, 393,000 large trucks (gross vehicle weight rating greater than 10,000 pounds) were involved in traffic crashes in the United States; 4,740 were involved in fatal crashes. A total of 5,126 people died (12 percent of all the traffic fatalities...

Higher speed freight truck : vehicle dynamics analysis.

DOT National Transportation Integrated Search

2015-08-01

Previously, Sharma & Associates, Inc. (SA) developed a higher speed freight truck design under sponsorship of the Federal : Railroad Administration. Under the current contract, SA was tasked with developing performance requirements for higher speed :...

Modeling mechanical restriction differences between car and heavy truck in two-lane cellular automata traffic flow model

NASA Astrophysics Data System (ADS)

Li, Xin; Li, Xingang; Xiao, Yao; Jia, Bin

2016-06-01

Real traffic is heterogeneous with car and truck. Due to mechanical restrictions, the car and the truck have different limited deceleration capabilities, which are important factors in safety driving. This paper extends the single lane safety driving (SD) model with limited deceleration capability to two-lane SD model, in which car-truck heterogeneous traffic is considered. A car has a larger limited deceleration capability while a heavy truck has a smaller limited deceleration capability as a result of loaded goods. Then the safety driving conditions are different as the types of the following and the leading vehicles vary. In order to eliminate the well-known plug in heterogeneous two-lane traffic, it is assumed that heavy truck has active deceleration behavior when the heavy truck perceives the forming plug. The lane-changing decisions are also determined by the safety driving conditions. The fundamental diagram, spatiotemporal diagram, and lane-changing frequency were investigated to show the effect of mechanical restriction on heterogeneous traffic flow. It was shown that there would be still three traffic phases in heterogeneous traffic condition; the active deceleration of the heavy truck could well eliminate the plug; the lane-changing frequency was low in synchronized flow; the flow and velocity would decrease as the proportion of heavy truck grows or the limited deceleration capability of heavy truck drops; and the flow could be improved with lane control measures.

Prospects of development of land driverless trucks

NASA Astrophysics Data System (ADS)

Bakhmutov, S.; Saykin, A.; Endachev, D.; Evgrafov, V.; Shagurin, A.; Kulikov, I.; Fedoseev, K.

2018-02-01

The paper is dedicated to the problem of creation and efficient use of driverless trucks. It also contains general analysis of foreign experience and development trends. The concept of FSUE “NAMI” for development of a platoon of driverless trucks for cargo transportation between specialized terminals on public roads is provided. A road train with virtual couplings where the lead vehicle has a driver and the rest are driverless is proposed as a base for the driverless platoon. The platoon is formed by such road trains, which ensures extended functional features, including the possibility to form platoons of road trains from different logistics centers and with different destinations, quick reforming of the platoon in the logistics centers, possibility to split the platoon when driving on public roads, higher precision of control over the platoon during driving, etc. It is also shown that in order to improve the efficiency of cargo transportation, driverless cargo platforms (trucks) shall be designed without a cabin. The paper also considers the ways to reduce the price of driverless trucks by creating a special road infrastructure, which will allow transfer of the most expensive subsystems of driverless vehicles to such infrastructure. Upon that, the following subsystems will remain within the driverless chassis: navigation, communication, chassis control and ADAS. It is noted that creation of such infrastructure will require high investments, therefore, gradual implementation of such systems is seen as rational. It is shown that the most appropriate area for these purposes is transregional cargo transportation. It is noted that the economic reasons for implementation of the proposed concept are as follows: significant reduction of the number of drivers; significant simplification of the driverless platform control system and reduction of the price of subsystems; no need for the driver’s cabin within the driverless platform; fuel economy when driving within a

41 CFR 109-38.104 - Fuel efficient passenger automobiles and light trucks.

Code of Federal Regulations, 2011 CFR

2011-01-01

... automobiles and light trucks. 109-38.104 Section 109-38.104 Public Contracts and Property Management Federal... Vehicles § 109-38.104 Fuel efficient passenger automobiles and light trucks. (a) [Reserved] (b) All requests to purchase passenger automobiles larger than class IA, IB, or II (small, subcompact, or compact...

41 CFR 109-38.104 - Fuel efficient passenger automobiles and light trucks.

Code of Federal Regulations, 2013 CFR

2013-07-01

... automobiles and light trucks. 109-38.104 Section 109-38.104 Public Contracts and Property Management Federal... Vehicles § 109-38.104 Fuel efficient passenger automobiles and light trucks. (a) [Reserved] (b) All requests to purchase passenger automobiles larger than class IA, IB, or II (small, subcompact, or compact...

41 CFR 109-38.104 - Fuel efficient passenger automobiles and light trucks.

Code of Federal Regulations, 2014 CFR

2014-01-01

... automobiles and light trucks. 109-38.104 Section 109-38.104 Public Contracts and Property Management Federal... Vehicles § 109-38.104 Fuel efficient passenger automobiles and light trucks. (a) [Reserved] (b) All requests to purchase passenger automobiles larger than class IA, IB, or II (small, subcompact, or compact...

41 CFR 109-38.104 - Fuel efficient passenger automobiles and light trucks.

Code of Federal Regulations, 2010 CFR

2010-07-01

... automobiles and light trucks. 109-38.104 Section 109-38.104 Public Contracts and Property Management Federal... Vehicles § 109-38.104 Fuel efficient passenger automobiles and light trucks. (a) [Reserved] (b) All requests to purchase passenger automobiles larger than class IA, IB, or II (small, subcompact, or compact...

41 CFR 109-38.104 - Fuel efficient passenger automobiles and light trucks.

Code of Federal Regulations, 2012 CFR

2012-01-01

... automobiles and light trucks. 109-38.104 Section 109-38.104 Public Contracts and Property Management Federal... Vehicles § 109-38.104 Fuel efficient passenger automobiles and light trucks. (a) [Reserved] (b) All requests to purchase passenger automobiles larger than class IA, IB, or II (small, subcompact, or compact...

Waste Workers’ Exposure to Airborne Fungal and Bacterial Species in the Truck Cab and During Waste Collection

PubMed Central

Madsen, Anne Mette; Alwan, Taif; Ørberg, Anders; Uhrbrand, Katrine; Jørgensen, Marie Birk

2016-01-01

A large number of people work with garbage collection, and exposure to microorganisms is considered an occupational health problem. However, knowledge on microbial exposure at species level is limited. The aim of the study was to achieve knowledge on waste collectors’ exposure to airborne inhalable fungal and bacterial species during waste collection with focus on the transport of airborne microorganisms into the truck cab. Airborne microorganisms were collected with samplers mounted in the truck cab, on the workers’ clothes, and outdoors. Fungal and bacterial species were quantified and identified. The study showed that the workers were exposed to between 112 and 4.8×104 bacteria m−3 air and 326 and 4.6×104 fungi m−3 air. The personal exposures to bacteria and fungi were significantly higher than the concentrations measured in the truck cabs and in the outdoor references. On average, the fungal and bacterial concentrations in truck cabs were 111 and 7.7 times higher than outdoor reference measurements. In total, 23 fungal and 38 bacterial species were found and identified. Most fungal species belonged to the genus Penicillium and in total 11 Penicillium species were found. Identical fungal species were often found both in a personal sample and in the same person’s truck cab, but concentrations were on average 27 times higher in personal samples. Concentrations of fungal and bacterial species found only in the personal samples were lower than concentrations of species also found in truck cabs. Skin-related bacteria constituted a large fraction of bacterial isolates found in personal and truck cab samples. In total, six Staphylococcus species were found. In outdoor samples, no skin-related bacteria were found. On average, concentrations of bacterial species found both in the truck cab and personal samples were 77 times higher in personal samples than in truck cab samples. In conclusion, high concentrations of fungi were found in truck cabs, but the

Influences on Energy Savings of Heavy Trucks Using Cooperative Adaptive Cruise Control

DOE Office of Scientific and Technical Information (OSTI.GOV)

Lammert, Michael P; McAuliffe, Brian; Lu, Xiao-Yun

An integrated adaptive cruise control (ACC) and cooperative ACC (CACC) was implemented and tested on three heavy-duty tractor-trailer trucks on a closed test track. The first truck was always in ACC mode, and the followers were in CACC mode using wireless vehicle-vehicle communication to augment their radar sensor data to enable safe and accurate vehicle following at short gaps. The fuel consumption for each truck in the CACC string was measured using the SAE J1321 procedure while travelling at 65 mph and loaded to a gross weight of 65,000 lb, demonstrating the effects of: inter-vehicle gaps (ranging from 3.0 smore » or 87 m to 0.14 s or 4 m, covering a much wider range than previously reported tests), cut-in and cut-out maneuvers by other vehicles, speed variations, the use of mismatched vehicles (standard trailers mixed with aerodynamic trailers with boat tails and side skirts), and the presence of a passenger vehicle ahead of the platoon. The results showed that energy savings generally increased in a non-linear fashion as the gap was reduced. The middle truck saved the most fuel at gaps shorter than 12 m and the trailing truck saved the most at longer gaps, while lead truck saved the least at all gaps. The cut-in and cut-out maneuvers had only a marginal effect on fuel consumption even when repeated every two miles. The presence of passenger-vehicle traffic had a measurable impact. The fuel-consumption savings on the curves was less than on the straight sections.« less

Ticketing aggressive cars and trucks (TACT): How does it work on city streets?

PubMed

Telford, Russell; Cook, Lawrence J; Olson, Lenora M

2018-02-17

The purpose of this study was to determine the feasibility of modifying the Ticking Aggressive Cars and Trucks (TACT) program, originally designed to work on state highways, within a metropolitan area to reduce unsafe interactions and their related crashes between drivers of large trucks and passenger vehicles. Using crash data, the driving behaviors most commonly associated with large truck and passenger vehicle crashes were identified. A public awareness campaign using media messaging and increased law enforcement was created targeting these associated behaviors. The frequency of these behaviors both before and after the public awareness campaign was determined through observation of traffic at 3 specific locations within the city. Each location had a sufficient volume of large truck and passenger traffic to observe frequent interactions. Pre- and postintervention data were compared using negative binomial regression with generalized estimating equations to evaluate whether the campaign was associated with a reduction in the identified driving behaviors. A comparison between crash data from before, during, and after the campaign and crashes during the same time periods in previous years did not show a significant difference (P =.081). The number of large trucks observed in traffic remained the same during pre- and postintervention periods (P =.625). The rates of negative interactions per 100 large trucks decreased for both large trucks and passenger vehicles after the intervention, with calculated rate ratios of 0.58 (95% confidence interval [CI], 0.48, 0.70) and 0.31 (95% CI, 0.20, 0.47). The greatest reduction was seen in passenger vehicles following too close, with a rate ratio of 0.21 (95% CI, 0.15, 0.30). Although designed for reducing crashes on highways, the TACT program can be an effective approach for improving driver behaviors on city streets.

Traffic safety facts 1999 : large trucks

DOT National Transportation Integrated Search

2000-01-01

In 1999, 475,000 large trucks (gross vehicle weight rating greater than 10,000 lb) were involved in traffic crashes in the United States; 4,898 were involved in fatal crashes. A total of 5,362 people died (13% of all the traffic fatalities reported i...

Traffic safety facts 1993 : large trucks

DOT National Transportation Integrated Search

1994-01-01

In 1994, 4,615 large trucks (gross vehicle weight rating greater than 10,000 pounds) were involved in fatal traffic crashes in the United States. A total of 5,112 people died in those crashes-13 percent of the 40,676 traffic fatalities reported in 19...

Traffic safety facts 1994 : large trucks

DOT National Transportation Integrated Search

1995-01-01

In 1994, 4,615 large trucks (gross vehicle weight rating greater than 10,000 pounds) were involved in fatal traffic crashes in the United States. A total of 5,112 people died in those crashes-13 percent of the 40,676 traffic fatalities reported in 19...

The effect of the descent technique and truck cabin layout on the landing impact forces.

PubMed

Patenaude, S; Marchand, D; Samperi, S; Bélanger, M

2001-12-01

The majority of injuries to truckers are caused by falls during the descent from the cab of the truck. Several studies have shown that the techniques used to descend from the truck and the layout of the truck's cabin are the principal cause of injury. The goal of the present study was to measure the effects of the descent techniques used by the trucker and the layout of the truck's cabin on the impact forces absorbed by the lower limbs and the back. Kinematic data, obtained with the aid of a video camera, were combined with the force platform data to allow for calculation of the lower limb and L5-S1 torques as well as L5-S1 compressive forces. The trucker descended from two different conventional tractor cabin layouts. Each trucker descended from cabin using either "facing the truck" (FT) or "back to the truck" (BT) techniques. The results demonstrate that the BT technique produces greater ground impact forces than the FT technique, particularly when the truck does not have a handrail. The BT technique also causes an increase in the compressive forces exerted on the back. In conclusion, the use of the FT technique along with the aids (i.e., handrails and all the steps) help lower the landing impact forces as well as the lumbosacral compressive forces.

In-use activity, fuel use, and emissions of heavy-duty diesel roll-off refuse trucks.

PubMed

Sandhu, Gurdas S; Frey, H Christopher; Bartelt-Hunt, Shannon; Jones, Elizabeth

2015-03-01

The objectives of this study were to quantify real-world activity, fuel use, and emissions for heavy duty diesel roll-off refuse trucks; evaluate the contribution of duty cycles and emissions controls to variability in cycle average fuel use and emission rates; quantify the effect of vehicle weight on fuel use and emission rates; and compare empirical cycle average emission rates with the U.S. Environmental Protection Agency's MOVES emission factor model predictions. Measurements were made at 1 Hz on six trucks of model years 2005 to 2012, using onboard systems. The trucks traveled 870 miles, had an average speed of 16 mph, and collected 165 tons of trash. The average fuel economy was 4.4 mpg, which is approximately twice previously reported values for residential trash collection trucks. On average, 50% of time is spent idling and about 58% of emissions occur in urban areas. Newer trucks with selective catalytic reduction and diesel particulate filter had NOx and PM cycle average emission rates that were 80% lower and 95% lower, respectively, compared to older trucks without. On average, the combined can and trash weight was about 55% of chassis weight. The marginal effect of vehicle weight on fuel use and emissions is highest at low loads and decreases as load increases. Among 36 cycle average rates (6 trucks×6 cycles), MOVES-predicted values and estimates based on real-world data have similar relative trends. MOVES-predicted CO2 emissions are similar to those of the real world, while NOx and PM emissions are, on average, 43% lower and 300% higher, respectively. The real-world data presented here can be used to estimate benefits of replacing old trucks with new trucks. Further, the data can be used to improve emission inventories and model predictions. In-use measurements of the real-world activity, fuel use, and emissions of heavy-duty diesel roll-off refuse trucks can be used to improve the accuracy of predictive models, such as MOVES, and emissions

The impact of truck repositioning on congestion and pollution in the LA basin.

DOT National Transportation Integrated Search

2011-03-01

Pollution and congestion caused by port related truck traffic is usually estimated based on careful transportation modeling and simulation. In these efforts, however, attention is normally focused on trucks on their way from a terminal at the Los Ang...

NREL Validates Plug-In Hybrid Truck for Pacific Gas and Electric Company |

Science.gov Websites

Energy Systems Integration Facility | NREL Pacific Gas and Electric Company NREL Validates Plug -In Hybrid Truck for Pacific Gas and Electric Company NREL is evaluating and analyzing a Pacific Gas and Electric Company (PG&E) plug-in hybrid electric utility truck developed by Efficient

[Lift-trucks technological development related to driver's safety and health].

PubMed

Tartara, G

2012-01-01

The counterbalanced lift truck is a machinery characterized by an unusual behaviour. Like a lever, indeed, it is deeply affected by the change of the load condition: sometime, when a small variation of the load takes place, the position of the original load centre of gravity may change a lot. For this reason, an ordinary lapse or a small mistake when driving may lead to a dangerous situation in a so speedy way that the most skilled lift-truck operator too might be surprised. Only the technological development, often incited by binding provisions, can help him. This paper shortly shows the lift-truck evolution related to the driver's safety and health. In spite of our expectations, however, market does not seem to be interested in this development: either because its mind has been took away by other kind of problems, or because a suitable sensitization campaign did not take place.

Understanding commercial truck drivers' decision-makin process concerning distracted driving.

PubMed

Swedler, David I; Pollack, Keshia M; Gielen, Andrea C

2015-05-01

A concurrent mixed methods design was used to explore personal and workplace factors, informed by the Theory of Planned Behavior, that affect truck drivers' decision-making about distracted driving on the job. Qualitative data were collected via semi-structured interviews with experts in truck safety and distracted driving, and quantitative data were collected via online survey of truck drivers in the United States. Findings from the interviews illustrated how drivers perceived distractions and the importance of supervisors enforcing organizational distracted driving policies. Survey results found that behavioral intentions were most important in regards to texting and crash and near-crash outcomes, while perceived norms from management best described the correlation between dispatch device use and negative crash-related outcomes. By using a mixed methods design, rather than two separate studies, these findings revealed nuanced differences into the influence of supervisors on distracted driving. Copyright © 2015 Elsevier Ltd. All rights reserved.

Effects of season, truck type, and location within truck on gastrointestinal tract temperature of market-weight pigs during transport.

PubMed

Conte, S; Faucitano, L; Bergeron, R; Torrey, S; Gonyou, H W; Crowe, T; Tamminga, E Toth; Widowski, T M

2015-12-01

Two experiments were done to assess the effects of season, truck type, and location in the truck on the gastrointestinal tract temperature (GTT) of market-weight pigs during transport. In Exp. 1, a total of 504 sentinel pigs were selected from a total load of 3,756 pigs over 12 wk in summer or winter and transported in either a double-decked (DD) hydraulic truck or a pot-belly (PB) trailer for 2 h. In Exp. 2, a total of 330 sentinel pigs were selected from a total load of 2,145 pigs over 11 wk in summer or winter and transported in a PB trailer for 8 h. In both experiments, sentinel pigs were equipped with a temperature data logger for the real-time GTT recording from the farm to slaughter. Transport was divided into 8 periods in Exp. 1 (rest, pretravel, initial travel, prearrival 1, prearrival 2, unloading, lairage 1, and lairage 2) and in Exp. 2 (rest, pretravel 1, pretravel 2, travel, prearrival 1, prearrival 2, lairage 1, and lairage 2). A delta GTT (ΔGTT) was calculated as the difference between the measured GTT at any determined event and the GTT measured at rest. In Exp. 1, the ΔGTT of pigs was greater ( < 0.001) in summer than in winter and only during the pretravel and initial travel periods. No difference was observed in the ΔGTT between the 2 truck types ( > 0.10). In summer, pigs located in the front top and rear top compartments of the PB trailer presented greater ( < 0.05) ΔGTT values than those transported in the middle top and front belly compartments during initial travel. In summer, during prearrival 1 and 2, a greater ( < 0.05) loss of GTT was found in pigs located in the rear top compartment of the DD truck compared with the rear lower compartment and in the front middle compartment compared with the rear middle compartment of the PB trailer. In Exp. 2, the ΔGTT of pigs was greater ( = 0.03) in summer than in winter during pretravel 2. Pigs in the front top compartment had a greater ( < 0.05) ΔGTT compared with pigs in the middle top

Characteristics and Contributory Causes Related to Large Truck Crashes (Phase I) - Fatal Crashes

DOT National Transportation Integrated Search

2010-06-01

One-ninth of all traffic fatalities in the United States have involved large trucks in the past five years, although large trucks contributed to only 3% of registered vehicles and 7% of vehicle miles travelled. This contrasting proportion indicates t...

Washington State freight truck origin and destination study : methods, procedures, and data dictionary

DOT National Transportation Integrated Search

1994-12-01

The Washington State Department of Transportation (WSDOT)initiated a state-wide freight truck origin and destination study in April of 1993. A region-wide freight truck origin and destination study was first proposed in Washington as an element of th...

Truck Travel Surveys: A Review of the Literature and State-of-the-Art

DOT National Transportation Integrated Search

1995-01-01

This paper presents the literature on conducting truck travel surveys in the U.S. and abroad. It includes past experiences, as well as current practices in : conducting truck surveys. The primary purpose of this paper is to present : compiled informa...

The causes and control of loader- and truck-related fatalities in surface mining operations.

PubMed

Kecojevic, Vladislav; Radomsky, Mark

2004-12-01

At surface mining operations throughout the world, loaders and trucks are a primary means of material loading and haulage. As the size, use and technological complexity of these units have increased, so has the concern regarding loader and truck safety. The severity and number of accidents involving loaders and trucks is higher when compared to all other mining accident types. In this paper, an analysis of loader and truck-related fatalities over the last 8 years is performed, the fatality categories and causes of accidents are established and control strategies are discussed and evaluated in an effort to increase hazard awareness by emphasizing safe loading, hauling and maintenance practices, as well as the value of traditional and innovative miner training programmes.

Truck Parking Initiative : I-95 Corridor Coalition

DOT National Transportation Integrated Search

2008-02-14

The I-95 Corridor Coalition is very pleased to submit this application for funding, through the Maryland State Highway Administration, under the Federal Highway Administration's (FHWA) Truck Parking Initiative. The Coalition is an alliance of transpo...

Acceleration lane design for higher truck volumes.

DOT National Transportation Integrated Search

2008-12-09

The research project examined attributes associated with tractor-trailer trucks accelerating on freeway entry ramps and : entering the main traffic lanes. Data for this project were collected at five commercial vehicle weigh stations in : Arkansas an...

"Kindergarten Truck": Participatory Play in Public

ERIC Educational Resources Information Center

Gaines, Andrew M.

2015-01-01

As a licensed dramatherapist, experienced teacher, applied theatre artist and doctoral candidate in educational theatre, the centre of my research and practice has revolved around the intersection of activism, education, healing and performance aesthetics for the last 20 years. My latest street theatre project, "Kindergarten Truck" (KT),…

NIOSH national survey of long-haul truck drivers: Injury and safety.

PubMed

Chen, Guang X; Sieber, W Karl; Lincoln, Jennifer E; Birdsey, Jan; Hitchcock, Edward M; Nakata, Akinori; Robinson, Cynthia F; Collins, James W; Sweeney, Marie H

2015-12-01

Approximately 1,701,500 people were employed as heavy and tractor-trailer truck drivers in the United States in 2012. The majority of them were long-haul truck drivers (LHTDs). There are limited data on occupational injury and safety in LHTDs, which prompted a targeted national survey. The National Institute of Occupational Safety and Health conducted a nationally representative survey of 1265 LHTDs at 32 truck stops across the contiguous United States in 2010. Data were collected on truck crashes, near misses, moving violations, work-related injuries, work environment, safety climate, driver training, job satisfaction, and driving behaviors. Results suggested that an estimated 2.6% of LHTDs reported a truck crash in 2010, 35% reported at least one crash while working as an LHTD, 24% reported at least one near miss in the previous 7 days, 17% reported at least one moving violation ticket and 4.7% reported a non-crash injury involving days away from work in the previous 12 months. The majority (68%) of non-crash injuries among company drivers were not reported to employers. An estimate of 73% of LHTDs (16% often and 58% sometimes) perceived their delivery schedules unrealistically tight; 24% often continued driving despite fatigue, bad weather, or heavy traffic because they needed to deliver or pick up a load at a given time; 4.5% often drove 10miles per hours or more over the speed limit; 6.0% never wore a seatbelt; 36% were often frustrated by other drivers on the road; 35% often had to wait for access to a loading dock; 37% reported being noncompliant with hours-of-service rules (10% often and 27% sometimes); 38% of LHTDs perceived their entry-level training inadequate; and 15% did not feel that safety of workers was a high priority with their management. This survey brings to light a number of important safety issues for further research and interventions, e.g., high prevalence of truck crashes, injury underreporting, unrealistically tight delivery schedules

NIOSH national survey of long-haul truck drivers: Injury and safety

PubMed Central

Chen, Guang X.; Sieber, W. Karl; Lincoln, Jennifer E.; Birdsey, Jan; Hitchcock, Edward M.; Nakata, Akinori; Robinson, Cynthia F.; Collins, James W.; Sweeney, Marie H.

2015-01-01

Approximately 1,701,500 people were employed as heavy and tractor-trailer truck drivers in the United States in 2012. The majority of them were long-haul truck drivers (LHTDs). There are limited data on occupational injury and safety in LHTDs, which prompted a targeted national survey. The National Institute of Occupational Safety and Health conducted a nationally representative survey of 1265 LHTDs at 32 truck stops across the contiguous United States in 2010. Data were collected on truck crashes, near misses, moving violations, work-related injuries, work environment, safety climate, driver training, job satisfaction, and driving behaviors. Results suggested that an estimated 2.6% of LHTDs reported a truck crash in 2010, 35% reported at least one crash while working as an LHTD, 24% reported at least one near miss in the previous 7 days, 17% reported at least one moving violation ticket and 4.7% reported a non-crash injury involving days away from work in the previous 12 months. The majority (68%) of non-crash injuries among company drivers were not reported to employers. An estimate of 73% of LHTDs (16% often and 58% sometimes) perceived their delivery schedules unrealistically tight; 24% often continued driving despite fatigue, bad weather, or heavy traffic because they needed to deliver or pick up a load at a given time; 4.5% often drove 10 miles per hours or more over the speed limit; 6.0% never wore a seatbelt; 36% were often frustrated by other drivers on the road; 35% often had to wait for access to a loading dock; 37% reported being noncompliant with hours-of-service rules (10% often and 27% sometimes); 38% of LHTDs perceived their entry-level training inadequate; and 15% did not feel that safety of workers was a high priority with their management. This survey brings to light a number of important safety issues for further research and interventions, e.g., high prevalence of truck crashes, injury underreporting, unrealistically tight delivery schedules

Presenting a conceptual pattern of HSE performance of oil trucks.

PubMed

Ghaleh, Sahar; Omidvari, Manouchehr; Nassiri, Parvin; Momeni, Mansour; Lavasani, Seyed Mohammadreza Miri

2018-01-25

Accidents are among the main problems in the oil product supply chain. The most important effective factors in these events are the kind of trucks used and their health, safety, and environment (HSE) condition. The aim of this study was to present a conceptual pattern of the HSE performance of oil trucks in oil industries. In this study, 20 truck models (with fixed tanks), in use over different periods of time, were investigated. In this regard, the criteria and sub-criteria were first determined in two parts-carrier and tank-and weighted by fuzzy analytical hierarchy process (FAHP). The results showed that the most important sub-criteria regarding the HSE factors of the carrier were resistance and strength of the front and rear shields, the brake system, and the ventilation system. The most important sub-criteria regarding the HSE factors of the tank were tank shell thickness and a good tank design shape with respect to portable material. It should be noted that the weight of the criteria with each other and sub-criteria with each other are not equal. This issue is important for decision-making. The main reason for the use of trucks with the lowest score in developing countries is the lack of attention by managers to safety issues and international standards and agreements such as the ADR.

Higher speed freight truck design : performance requirements.

DOT National Transportation Integrated Search

2013-10-01

This proposed requirements document combines a set of requirements for high-speed freight car truck design and performance : from the generally accepted standards in the U.S. Code of Federal Regulation (CFR), the Association of American Railroads : (...

40 CFR 86.097-9 - Emission standards for 1997 and later model year light-duty trucks.

Code of Federal Regulations, 2013 CFR

2013-07-01

....097-9 Emission standards for 1997 and later model year light-duty trucks. (a)(1) Standards—(i) Light... standards. (ii) Heavy light-duty trucks. (A) Exhaust emissions from 1997 and later model year heavy light... model year light-duty trucks from compliance at low altitude with the emission standards set forth in...

On-Road Diesel Truck Emissions Measurement and Inventory Development in Chengdu City of China

NASA Astrophysics Data System (ADS)

Chen, J.; Ye, H.

2014-12-01

Real-world emission tests of three diesel trucks were conducted using SEMTECH-EcoStar gas analyzer produced by the US Sensors Company and Mi2 particle analyzer produced by the Finland Pegasor Company. The test duration was one day for each truck and 8813, 10407 and 11102 sets of effective post-processed data were collected for analyzing. The influence of vehicle speed, driving mode and vehicle mass on emission was analyzed and emission rates were calculated. Light-duty and heavy-duty truck activities in Chengdu were studied by survey and statistical analysis. The population of trucks was acquired from the Public Security Department of Sichuan province. Based on the test data and local collected data, this paper calculated an emission inventory of diesel trucks in Chengdu, the economic center of southwestern china. Results showed that the emission rates of CO, NO, THC and PM for the selected vehicles were（0.95~7.54）g/km,（1.03~3.97）g/km,（0.64~0.81）g/km and （0.01~0.07）g/km respectively. The annual vehicle activities of light-duty and heavy-duty trucks in Chengdu were 30,000 km and 44,000 km. The emission inventory of CO, NO, THC and PM in Chengdu were 23,000t/a, 15,000t/a, 4,000t/a and 200t/a.

Commercial truck crash injury severity analysis using gradient boosting data mining model.

PubMed

Zheng, Zijian; Lu, Pan; Lantz, Brenda

2018-06-01

Truck crashes contribute to a large number of injuries and fatalities. This study seeks to identify the contributing factors affecting truck crash severity using 2010 to 2016 North Dakota and Colorado crash data provided by the Federal Motor Carrier Safety Administration. To fulfill a gap of previous studies, broad considerations of company and driver characteristics, such as company size and driver's license class, along with vehicle types and crash characteristics are researched. Gradient boosting, a data mining technique, is applied to comprehensively analyze the relationship between crash severities and a set of heterogeneous risk factors. Twenty five variables were tested and 22 of them are identified as significant variables contributing to injury severities, however, top 11 variables account for more than 80% of injury forecasting. The relative variable importance analysis is conducted and furthermore marginal effects of all contributing factors are also illustrated in this research. Several factors such as trucking company attributes (e.g., company size), safety inspection values, trucking company commerce status (e.g., interstate or intrastate), time of day, driver's age, first harmful events, and registration condition are found to be significantly associated with crash injury severity. Even though most of the identified contributing factors are significant for all four levels of crash severity, their relative importance and marginal effect are all different. For the first time, trucking company and driver characteristics are proved to have significant impact on truck crash injury severity. Some of the results in this study reinforce previous studies' conclusions. Findings in this study can be helpful for transportation agencies to reduce injury severity, and develop efficient strategies to improve safety. Copyright © 2018 National Safety Council and Elsevier Ltd. All rights reserved.

A Study of Truck Drivers and Their Job Performance Regarding Highway Safety

ERIC Educational Resources Information Center

Nafukho, Fredrick M.; Hinton, Barbara E.; Graham, Carroll M.

2007-01-01

Limited research has addressed the issue of truck drivers and their performance regarding highway safety in terms of reduced number of crashes per driver. The primary purpose of this study was to determine how tractor trailer truck drivers' job performance could be improved while at the same time ensuring increased revenue for the transportation…

Enhanced Framework for Modeling Urban Truck Trips

DOT National Transportation Integrated Search

1998-09-16

Recently there has been renewed interest in modeling urban truck movements. : This is potentially important for improving traffic forecasts as well as for a : host of other applications including ITS. There are unique aspects of urban : freight movem...

Truck trip data collection methods : final report.

DOT National Transportation Integrated Search

2004-02-01

A considerable body of research exists for addressing the data needs for passenger transportation models and statewide freight truck movements. The number of studies which focus on methods for capturing the necessary data on urban freight movements i...

Obesity and Other Risk Factors: The National Survey of U.S. Long-Haul Truck Driver Health and Injury

PubMed Central

Sieber, W. Karl; Robinson, Cynthia F.; Birdsey, Jan; Chen, Guang X.; Hitchcock, Edward M.; Lincoln, Jennifer E.; Nakata, Akinori; Sweeney, Marie H.

2015-01-01

Background Drivers of heavy and tractor-trailer trucks accounted for 56% of all production and nonsupervisory employees in the truck transportation industry in 2011. There are limited data for illness and injury in long-haul truck drivers, which prompted a targeted national survey. Methods Interviewers collected data during 2010 from 1,670 long-haul truck drivers at 32 truck stops across the 48 contiguous United States that were used to compute prevalence estimates for self-reported health conditions and risk factors. Results Obesity (69% vs. 31%, P <0.01) and current smoking (51% vs. 19%, P <0.01) were twice as prevalent in long-haul truck drivers as in the 2010 U.S. adult working population. Sixty-one percent reported having two or more of the risk factors: hypertension, obesity, smoking, high cholesterol, no physical activity, 6 or fewer hours of sleep per 24-hr period. Conclusion Survey findings suggest a need for targeted interventions and continued surveillance for long-haul truck drivers. PMID:24390804

49 CFR 230.109 - Tender trucks.

Code of Federal Regulations, 2012 CFR

2012-10-01

... bolsters. Truck bolsters shall be maintained approximately level. (c) Condemning defects for springs or spring rigging. Springs or spring rigging with any of the following defects shall be taken out of service immediately and renewed or properly repaired: (1) An elliptical spring with its top (long) leaf or any other...

49 CFR 230.109 - Tender trucks.

Code of Federal Regulations, 2013 CFR

2013-10-01

... bolsters. Truck bolsters shall be maintained approximately level. (c) Condemning defects for springs or spring rigging. Springs or spring rigging with any of the following defects shall be taken out of service immediately and renewed or properly repaired: (1) An elliptical spring with its top (long) leaf or any other...

49 CFR 230.109 - Tender trucks.

Code of Federal Regulations, 2011 CFR

2011-10-01

... bolsters. Truck bolsters shall be maintained approximately level. (c) Condemning defects for springs or spring rigging. Springs or spring rigging with any of the following defects shall be taken out of service immediately and renewed or properly repaired: (1) An elliptical spring with its top (long) leaf or any other...

49 CFR 230.109 - Tender trucks.

Code of Federal Regulations, 2014 CFR

2014-10-01

... bolsters. Truck bolsters shall be maintained approximately level. (c) Condemning defects for springs or spring rigging. Springs or spring rigging with any of the following defects shall be taken out of service immediately and renewed or properly repaired: (1) An elliptical spring with its top (long) leaf or any other...

Alternative-fueled truck demonstration natural gas program: Caterpillar G3406LE development and demonstration

DOE Office of Scientific and Technical Information (OSTI.GOV)

NONE

In 1990, the California Energy Commission, the South Coast Air Quality Management District, and the Southern California Gas Company joined together to sponsor the development and demonstration of compressed natural gas engines for Class 8 heavy-duty line-haul trucking applications. This program became part of an overall Alternative-Fueled Truck Demonstration Program, with the goal of advancing the technological development of alternative-fueled engines. The demonstration showed natural gas to be a technically viable fuel for Class 8 truck engines.

Evaluation of US rear underride guard regulation for large trucks using real-world crashes.

PubMed

Brumbelow, Matthew L; Blanar, Laura

2010-11-01

Current requirements for rear underride guards on large trucks are set by the National Highway Traffic Safety Administration in Federal Motor Vehicle Safety Standards (FMVSS) 223 and 224. The standards have been in place since 1998, but their adequacy has not been evaluated apart from two series of controlled crash tests. The current study used detailed reviews of real-world crashes from the Large Truck Crash Causation Study to assess the ability of guards that comply with certain aspects of the regulation to mitigate passenger vehicle underride. It also evaluated the dangers posed by underride of large trucks that are exempt from guard requirements. For the 115 cases meeting the inclusion criteria, coded data, case narratives, photographs, and measurements were used to examine the interaction between study vehicles. The presence and type of underride guard was determined, and its performance in mitigating underride was categorized. Overall, almost one-half of the passenger vehicles had underride damage classified as severe or catastrophic. These vehicles accounted for 23 of the 28 in which occupants were killed. For the cases involving trailers with underride guards compliant with one or both FMVSS, guard deformation or complete failure was frequent and most commonly due to weak attachments, buckling of the trailer chassis, or bending of the lateral end of the guard under narrow overlap loading. Most of the truck units studied qualified for at least one of the FMVSS exemptions. The two largest groups were trailers with small wheel setbacks and single-unit straight trucks. Dump trucks represented a particularly hazardous category of straight truck. The current study suggests several weaknesses in the rear underride guard regulation. The standard allows too much ground clearance, the quasi-static test conditions allow guard designs that fail in narrow overlap crashes, and certifying guards independent of trailers leads to systems with inadequate attachment and

Image processing system for the measurement of timber truck loads

NASA Astrophysics Data System (ADS)

Carvalho, Fernando D.; Correia, Bento A. B.; Davies, Roger; Rodrigues, Fernando C.; Freitas, Jose C. A.

1993-01-01

The paper industry uses wood as its raw material. To know the quantity of wood in the pile of sawn tree trunks, every truck load entering the plant is measured to determine its volume. The objective of this procedure is to know the solid volume of wood stocked in the plant. Weighing the tree trunks has its own problems, due to their high capacity for absorbing water. Image processing techniques were used to evaluate the volume of a truck load of logs of wood. The system is based on a PC equipped with an image processing board using data flow processors. Three cameras allow image acquisition of the sides and rear of the truck. The lateral images contain information about the sectional area of the logs, and the rear image contains information about the length of the logs. The machine vision system and the implemented algorithms are described. The results being obtained with the industrial prototype that is now installed in a paper mill are also presented.

NREL Highlight: Truck Platooning Testing; NREL (National Renewable Energy Laboratory)

DOE Office of Scientific and Technical Information (OSTI.GOV)

None

NREL's fleet test and evaluation team assesses the fuel savings potential of semi-automated truck platooning of line-haul sleeper cabs with modern aerodynamics. Platooning reduces aerodynamic drag by grouping vehicles together and safely decreasing the distance between them via electronic coupling, which allows multiple vehicles to accelerate or brake simultaneously. In 2014, the team conducted track testing of three SmartWay tractor - two platooned tractors and one control tractor—at varying steady-state speeds, following distances, and gross vehicle weights. While platooning improved fuel economy at all speeds, travel at 55 mph resulted in the best overall miles per gallon. The lead truckmore » demonstrated fuel savings up to 5.3% while the trailing truck saved up to 9.7%. A number of conditions impact the savings attainable, including ambient temperature, distance between lead and trailing truck, and payload weight. Future studies may look at ways to optimize system fuel efficiency and emissions reductions.« less

Safety climate and the distracted driving experiences of truck drivers.

PubMed

Swedler, David I; Pollack, Keshia M; Agnew, Jacqueline

2015-07-01

For truck drivers, distracted driving is a workplace behavior that increases occupational injury risk. We propose safety climate as an appropriate lens through which researchers can examine occupational distracted driving. Using a mixed methods study design, we surveyed truck drivers using the Safety Climate Questionnaire (SCQ) complemented by semi-structured interviews of experts on distracted driving and truck safety. Safety climate was assessed by using the entire SCQ as an overall climate score, followed by factor analysis that identified the following safety climate factors: Communications and Procedures; Management Commitment; and Work Pressure. In multivariate regression, the overall safety climate scale was associated with having ever experienced a crash and/or distraction-involved swerving. Interview participants described how these SCQ constructs could affect occupational distracted driving. To reduce distraction-related crashes in their organizations, management can adhere to safe policies and procedures, invest in engineering controls, and develop safer communication procedures. © 2015 Wiley Periodicals, Inc.

The Evaluation of Developing Vehicle Technologies on the Fuel Economy of Long-Haul Trucks

DOE PAGES

Gao, Zhiming; Smith, David E.; Daw, C. Stuart; ...

2015-12-01

We present fuel savings estimates resulting from the combined implementation of multiple advanced energy management technologies in both conventional and parallel hybrid class 8 diesel trucks. The energy management technologies considered here have been specifically targeted by the 21st Century Truck Partnership (21 CTP) between the U.S. Department of Energy and U.S. industry and include advanced combustion engines, waste heat recovery, and reductions in auxiliary loads, rolling resistance, aerodynamic drag, and gross vehicle weight. Furthermore, we estimated that combined use of all these technologies in hybrid trucks has the potential to improve fuel economy by more than 60% compared tomore » current conventional trucks, but this requires careful system integration to avoid non-optimal interactions. Major factors to be considered in system integration are discussed.« less

Delay and environmental costs of truck crashes

DOT National Transportation Integrated Search

2013-03-01

This report presents estimates of certain categories of costs of truck- and bus-involved crashes. Crash related costs estimated as part of this study include vehicle delay costs, emission costs, and fuel consumption costs. In addition, this report al...

29 CFR 779.371 - Some automobile, truck, and farm implement establishments may qualify for exemption under section...

Code of Federal Regulations, 2010 CFR

2010-07-01

... 29 Labor 3 2010-07-01 2010-07-01 false Some automobile, truck, and farm implement establishments... OR SERVICES Exemptions for Certain Retail or Service Establishments Automobile, Truck, Farm Implement, Trailer, and Aircraft Sales and Services § 779.371 Some automobile, truck, and farm implement...

Risk of commercial truck fires in the United States : an exploratory data analysis

DOT National Transportation Integrated Search

2012-06-29

Large trucks are involved in only 8 percent of fatal crashes per year, but 17 percent of fatal fires. The scope of the current body of research is limited. Studies have treated truck fires generally as a subset of vehicle fires or in their own right ...

Truck mounted impact attenuators used in Virginia.

DOT National Transportation Integrated Search

1984-01-01

The dense, high speed traffic on some of Virginia's highways necessitates taking the extreme measure of protecting the Department's maintenance personnel by placing a blocking truck in a lane that has been closed for repairs. To protect anyone who mi...

Instrumentation of Navistar truck for data collection.

DOT National Transportation Integrated Search

2013-01-01

The overarching goal of this project was to instrument the new MnDOT Navistar truck used at MN Road. A : rugged data acquisition, data recording and wireless transmission system was established for collection of various : sensor signals from the truc...

GCT Bayonne’s Drayage Truck Appointment System

EPA Pesticide Factsheets

Global Container Terminals (GCT) has implemented an advanced truck appointment system at its GCT Bayonne facility at the Port of New York and New Jersey that has realized benefits in terms of cost savings, turn times, the environment, and congestion.

49 CFR 230.99 - Tender truck axles.

Code of Federal Regulations, 2010 CFR

2010-10-01

... Tenders Running Gear § 230.99 Tender truck axles. The minimum diameters of axles for various axle loads... wheel seat (in inches) Minimumdiameter of center (in inches) 50000 51/2 73/8 67/16 38000 5 63/4 57/8...

40 CFR 86.1870-12 - CO2 credits for qualifying full-size pickup trucks.

Code of Federal Regulations, 2013 CFR

2013-07-01

... broadcast battery pack voltage via an on-board diagnostics parameter ID channel. (1) Full size pickup trucks... conditioning leakage and/or efficiency credits as determined in §§ 86.1867 and 6.1868. Pickup trucks earning...

A Reassessment of Heavy-Duty Truck Aerodynamic Design Features and Priorities

NASA Technical Reports Server (NTRS)

Saltzman, Edwin J.; Meyer, Robert R., Jr.

1999-01-01

Between 1973 and 1982, the NASA Dryden Flight Research Center conducted "coast-down" tests demonstrating means for reducing the drag of trucks, buses, and motor homes. Numerous configurations were evaluated using a box-shaped test van, a two-axle truck, and a tractor-semitrailer combination. Results from three configurations of the test van are of interest now in view of a trucking industry goal of a 0.25 drag coefficient for tractor-semitrailer combinations. Two test van configurations with blunt-base geometry, similar to present day trucks (one configuration has square front comers and the other has rounded front comers), quantify the base drag increase associated with reduced forebody drag. Hoemer's equations predict this trend; however, test van results, reinforced by large-scale air vehicle data, indicate that Hoemer's formula greatly underestimates this dependence of base drag on forebody efficiency. The demonstrated increase in base drag associated with forebody refinement indicates that the goal of a 0.25 drag coefficient will not be achieved without also reducing afterbody drag. A third configuration of the test van had a truncated boattail to reduce afterbody drag and achieved a drag coefficient of 0.242. These results are included here and references are identified for other means of reducing afterbody drag.

29 CFR 779.371 - Some automobile, truck, and farm implement establishments may qualify for exemption under section...

Code of Federal Regulations, 2012 CFR

2012-07-01

... 29 Labor 3 2012-07-01 2012-07-01 false Some automobile, truck, and farm implement establishments... OR SERVICES Exemptions for Certain Retail or Service Establishments Automobile, Truck and Farm Implement Sales and Services, and Trailer, Boat and Aircraft Sales § 779.371 Some automobile, truck, and...

29 CFR 779.371 - Some automobile, truck, and farm implement establishments may qualify for exemption under section...

Code of Federal Regulations, 2013 CFR

2013-07-01

... 29 Labor 3 2013-07-01 2013-07-01 false Some automobile, truck, and farm implement establishments... OR SERVICES Exemptions for Certain Retail or Service Establishments Automobile, Truck and Farm Implement Sales and Services, and Trailer, Boat and Aircraft Sales § 779.371 Some automobile, truck, and...

29 CFR 779.371 - Some automobile, truck, and farm implement establishments may qualify for exemption under section...

Code of Federal Regulations, 2011 CFR

2011-07-01

... 29 Labor 3 2011-07-01 2011-07-01 false Some automobile, truck, and farm implement establishments... OR SERVICES Exemptions for Certain Retail or Service Establishments Automobile, Truck and Farm Implement Sales and Services, and Trailer, Boat and Aircraft Sales § 779.371 Some automobile, truck, and...

29 CFR 779.371 - Some automobile, truck, and farm implement establishments may qualify for exemption under section...

Code of Federal Regulations, 2014 CFR

2014-07-01

... 29 Labor 3 2014-07-01 2014-07-01 false Some automobile, truck, and farm implement establishments... OR SERVICES Exemptions for Certain Retail or Service Establishments Automobile, Truck and Farm Implement Sales and Services, and Trailer, Boat and Aircraft Sales § 779.371 Some automobile, truck, and...

Fill That Truck | Poster

Cancer.gov

Feds Feed Families is a federal workforce initiative to fight hunger in our local communities. This year’s campaign began on June 13 and will continue until the end of August. After collecting approximately 550 pounds of food each of the last two years, NCI at Frederick is making a push to collect even more this summer. On June 29, during Take Your Child to Work Day, a 10-foot truck will be parked in the hub area along Chandler Street and Wood Street.

Noise induced hearing loss risk assessment in truck drivers.

PubMed

Karimi, Ali; Nasiri, Saleh; Kazerooni, Farshid Khodaparast; Oliaei, Mohammad

2010-01-01

Hearing sense is one of the key elements which may have impact on the driver's task quality. This cross-sectional study investigates the hearing status of 500 truck drivers by pure tone audiometry (AC) in one of the cities in Fars province, Iran. Hearing threshold levels of the subjects were measured in frequencies of 500Hz-8000Hz. Screening and determination of permanent threshold shift (PTS) was the first aim of this study. Hence tests were done at least 16 hours after any exposure to noticeable sound. The effect of age as a confounding factor was considered using ISO equation and subtracted from whole hearing threshold. The threshold of 25 dB HL and above was considered abnormal but the calculation of hearing was also carried out using 0 dB HL as reference. Subjects were categorized into two groups on the basis of working experience and the hearing threshold of 25 dB was considered a boundary of normal hearing sense. The results of Pearson Chi-Square test showed that working experience as an independent variable has significant contributing effect on hearing thresholds of truck drivers in frequencies of 500, 1000, 2000 and 4000 Hz (p greater than 0.05). Also, it was shown that currently nine and 12.6 % of truck drivers suffer from impaired hearing sense in left and right respectively (hearing threshold level greater than 25 dB) in mid frequencies (500, 1000, 2000 Hz) and 45% in high frequencies of both ears (4000 and 8000 Hz). The results indicated that hearing damage of professional drivers was expected to occur sooner at 4000 and 8000 Hz than lower frequencies. Finally it was deduced that the occupational conditions of truck drivers may have bilateral, symmetrical harmful effect on hearing threshold sense in all frequencies mainly in frequency of 4000 Hz, so health surveillance programs such as education and periodic medical examinations are emphasized for pre-diagnosing and prevention of any possible impairment and an urgent need to take up some interventions

Plug-In Hybrid Medium-Duty Truck Demonstration and Evaluation

DOE Office of Scientific and Technical Information (OSTI.GOV)

Miyasato, Matt; Kosowski, Mark

2015-10-01

The Plug-In Hybrid Medium-Duty Truck Demonstration and Evaluation Program was sponsored by the United States Department of Energy (DOE) using American Recovery and Reinvestment Act of 2009 (ARRA) funding. The purpose of the program is to develop a path to migrate plug-in hybrid electric vehicle (PHEV) technology to medium-duty vehicles by demonstrating and evaluating vehicles in diverse applications. The program also provided three production-ready PHEV systems—Odyne Systems, Inc. (Odyne) Class 6 to 8 trucks, VIA Motors, Inc. (VIA) half-ton pickup trucks, and VIA three-quarter-ton vans. The vehicles were designed, developed, validated, produced, and deployed. Data were gathered and tests weremore » run to understand the performance improvements, allow cost reductions, and provide future design changes. A smart charging system was developed and produced during the program. The partnerships for funding included the DOE; the California Energy Commission (CEC); the South Coast Air Quality Management District (SCAQMD); the Electric Power Research Institute (EPRI); Odyne; VIA; Southern California Edison; and utility and municipal industry participants. The reference project numbers are DOE FOA-28 award number EE0002549 and SCAQMD contract number 10659.« less

Electro-deposition painting process improvement of cab truck by Six Sigma concept

NASA Astrophysics Data System (ADS)

Kawitu, Kitiya; Chutima, Parames

2017-06-01

The case study company is a manufacturer of trucks and currently facing a high rework cost due to the thickness of the electro-deposited paint (EDP) of the truck cab is lower than standard. In addition, the process capability is very low. The Six Sigma concept consisting of 5 phases (DMAIC) is applied to determine new parameter settings for each significant controllable factor. After the improvement, EDP thickness of the truck cab increases from 17.88μ to 20μ (i.e. standard = 20 ± 3μ). Moreover, the process capability indexes (Cp and Cpk) are increased from 0.9 to 1.43, and from 0.27 to 1.43, respectively. This improvement could save the rework cost about 1.6M THB per year.

Light Duty Truck Characteristics, Historical Data Base

DOT National Transportation Integrated Search

1979-12-01

The report is a collection of data concerning physical, operating, performance, and market characteristics of light duty trucks for the model years 1972 and 1975 thru 1977. The data is stored on tape in DOT/TSC DEC System 10 computer system. Informat...

Estimation of seatbelt and frontal-airbag effectiveness in trucks : U.S. and Chinese perspectives.

DOT National Transportation Integrated Search

2013-01-01

The objectives of this study were (1) to estimate the effectiveness of seatbelts and driver : airbags for mitigating medium- and heavy-truck driver injuries, and (2) to discuss the : implication of these estimates with respect to truck-driving condit...

9 CFR 71.6 - Carrier responsible for cleaning and disinfecting of railroad cars, trucks, boats, aircraft or...

Code of Federal Regulations, 2011 CFR

2011-01-01

... disinfecting of railroad cars, trucks, boats, aircraft or other means of conveyance. 71.6 Section 71.6 Animals... for cleaning and disinfecting of railroad cars, trucks, boats, aircraft or other means of conveyance. (a) Railroad cars, trucks, boats, aircraft, and other means of conveyance which have been used in the...

9 CFR 71.6 - Carrier responsible for cleaning and disinfecting of railroad cars, trucks, boats, aircraft or...

Code of Federal Regulations, 2012 CFR

2012-01-01

... disinfecting of railroad cars, trucks, boats, aircraft or other means of conveyance. 71.6 Section 71.6 Animals... for cleaning and disinfecting of railroad cars, trucks, boats, aircraft or other means of conveyance. (a) Railroad cars, trucks, boats, aircraft, and other means of conveyance which have been used in the...

9 CFR 71.6 - Carrier responsible for cleaning and disinfecting of railroad cars, trucks, boats, aircraft or...

Code of Federal Regulations, 2013 CFR

2013-01-01

... disinfecting of railroad cars, trucks, boats, aircraft or other means of conveyance. 71.6 Section 71.6 Animals... for cleaning and disinfecting of railroad cars, trucks, boats, aircraft or other means of conveyance. (a) Railroad cars, trucks, boats, aircraft, and other means of conveyance which have been used in the...

9 CFR 71.6 - Carrier responsible for cleaning and disinfecting of railroad cars, trucks, boats, aircraft or...

Code of Federal Regulations, 2010 CFR

2010-01-01

... disinfecting of railroad cars, trucks, boats, aircraft or other means of conveyance. 71.6 Section 71.6 Animals... for cleaning and disinfecting of railroad cars, trucks, boats, aircraft or other means of conveyance. (a) Railroad cars, trucks, boats, aircraft, and other means of conveyance which have been used in the...

9 CFR 71.6 - Carrier responsible for cleaning and disinfecting of railroad cars, trucks, boats, aircraft or...

Code of Federal Regulations, 2014 CFR

2014-01-01

... disinfecting of railroad cars, trucks, boats, aircraft or other means of conveyance. 71.6 Section 71.6 Animals... for cleaning and disinfecting of railroad cars, trucks, boats, aircraft or other means of conveyance. (a) Railroad cars, trucks, boats, aircraft, and other means of conveyance which have been used in the...

19 CFR 123.41 - Truck shipments transiting Canada.

Code of Federal Regulations, 2011 CFR

2011-04-01

... OF THE TREASURY CBP RELATIONS WITH CANADA AND MEXICO United States and Canada In-Transit Truck... port of departure. The Customs officer receiving the manifest shall validate it by stamping each copy...

19 CFR 123.41 - Truck shipments transiting Canada.

Code of Federal Regulations, 2010 CFR

2010-04-01

... OF THE TREASURY CUSTOMS RELATIONS WITH CANADA AND MEXICO United States and Canada In-Transit Truck... port of departure. The Customs officer receiving the manifest shall validate it by stamping each copy...

Traffic and geometric characteristics affecting the involvement of large trucks in accidents : interim report.

DOT National Transportation Integrated Search

1989-07-01

Recent trends indicate that vehicle miles traveled for large trucks is increasing at a higher rate than for other vehicles. The resulting competition between large trucks and other vehicles for highway space can be expected to result in more multi-ve...

76 FR 59166 - Navistar Truck Development and Technology Center, a Subsidiary of Navistar International...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-09-23

... Development and Technology Center, a Subsidiary of Navistar International Corporation Truck Division, Fort... International Corporation, Truck Division, Fort Wayne, Indiana (subject firm). The negative determination was... is a headcount reduction across the nation, made possible by the Global Outsourcing. * * * '' The...

75 FR 56651 - ITS Joint Program Office; Trucking Industry Mobility & Technology Coalition Annual Meeting

Federal Register 2010, 2011, 2012, 2013, 2014

2010-09-16

...: Beating Gridlock with a Smart Grid; U.S. DOT Truck Technology Initiatives; and State and Federal... DEPARTMENT OF TRANSPORTATION ITS Joint Program Office; Trucking Industry Mobility & Technology Coalition Annual Meeting AGENCY: Research and Innovative Technology Administration, U.S. Department of...

Biomechanical investigation of prolonged driving in an ergonomically designed truck seat prototype.

PubMed

Cardoso, Michelle; McKinnon, Colin; Viggiani, Dan; Johnson, Michel J; Callaghan, Jack P; Albert, Wayne J

2018-03-01

A postural evaluation during a prolonged driving task was conducted to determine the ergonomic validity of a new freely adjustable truck seat prototype. Twenty participants were recruited to perform two 2-h simulated driving sessions. Postures were assessed using motion capture, accelerometers and pressure pads. Subjective discomfort was also monitored in 15-min increments using ratings of perceived discomfort (RPD) and the Automotive Seating Discomfort Questionnaire. Participants had a more neutral spine posture during the first hour of the drive and reported lower RPDs while sitting in the prototype. Pairing the gluteal backrest panel with the adjustable seat pan helped reduce the average sitting pressure. The industry-standard truck seat may lead to the development of poor whole body posture, and the proposed ergonomic redesign of a new truck seat helped improve sitting posture and reduce perceived discomfort. Practitioner Summary: A new freely adjustable truck seat prototype was compared to an Industry standard seat to assess hypothesised improvements to sitting posture and discomfort for long haul driving. It was found that the adjustable panels in the prototype helped promote spine posture, reduce sitting pressure and improved discomfort ratings.

The Problem of Multiple Criteria Selection of the Surface Mining Haul Trucks

NASA Astrophysics Data System (ADS)

Bodziony, Przemysław; Kasztelewicz, Zbigniew; Sawicki, Piotr

2016-06-01

Vehicle transport is a dominant type of technological processes in rock mines, and its profit ability is strictly dependent on overall cost of its exploitation, especially on diesel oil consumption. Thus, a rational design of transportation system based on haul trucks should result from thorough analysis of technical and economic issues, including both cost of purchase and its further exploitation, having a crucial impact on the cost of minerals extraction. Moreover, off-highway trucks should be selected with respect to all specific exploitation conditions and even the user's preferences and experience. In this paper a development of universal family of evaluation criteria as well as application of evaluation method for haul truck selection process for a specific exploitation conditions in surface mining have been carried out. The methodology presented in the paper is based on the principles of multiple criteria decision aiding (MCDA) using one of the ranking method, i.e. ELECTRE III. The applied methodology has been allowed for ranking of alternative solution (variants), on the considered set of haul trucks. The result of the research is a universal methodology, and it consequently may be applied in other surface mines with similar exploitation parametres.

Radio Frequency Identification (RFID) and communication technologies for solid waste bin and truck monitoring system.

PubMed

Hannan, M A; Arebey, Maher; Begum, R A; Basri, Hassan

2011-12-01

This paper deals with a system of integration of Radio Frequency Identification (RFID) and communication technologies for solid waste bin and truck monitoring system. RFID, GPS, GPRS and GIS along with camera technologies have been integrated and developed the bin and truck intelligent monitoring system. A new kind of integrated theoretical framework, hardware architecture and interface algorithm has been introduced between the technologies for the successful implementation of the proposed system. In this system, bin and truck database have been developed such a way that the information of bin and truck ID, date and time of waste collection, bin status, amount of waste and bin and truck GPS coordinates etc. are complied and stored for monitoring and management activities. The results showed that the real-time image processing, histogram analysis, waste estimation and other bin information have been displayed in the GUI of the monitoring system. The real-time test and experimental results showed that the performance of the developed system was stable and satisfied the monitoring system with high practicability and validity. Copyright © 2011 Elsevier Ltd. All rights reserved.

[Exposure to whole-body vibration of forklift truck operators in dockyards--actual exposure in Japan and evaluation by EN 13059].

PubMed

Tsujimura, Hiroji; Taoda, Kazushi; Nishiyama, Katsuo

2006-09-01

Low-back disorders are well documented as occupational hazards among forklift truck operators. The potential risk factors that may lead to low-back pain include exposure to whole-body vibration (WBV). In Europe, test methods were developed to evaluate WBV in industrial trucks, and the European Standard which defines the methods has been published. We measured the vibrations of forklift trucks operated in the Hanshin harbour area adopting procedures based on the CEN test and report the evaluation results. If the WBV magnitudes of the ride on forklift trucks in the workplace were less than or comparable to those in the CEN test, the CEN test could be considered useful for the risk assessment of forklift truck operators exposed to WBV. In order to verify the applicability of the CEN test to the evaluation of WBV exposure in the field, we conducted measurements of the WBV of four forklift trucks for 19 d. The trucks had already been examined by the CEN test. The truck velocity, driver position (sitting or not), and gear lever position were also measured, and video footage was obtained for the study. The results indicate that the vertical WBV magnitudes of the four forklift trucks were below the CEN test values. No dominant WBV direction was observed on any of the measurement days. The Health value (obtained by combining the values determined from the vibration in orthogonal coordinates) was comparable to that from the CEN test for one truck. The values for the other three trucks were lower. The data obtained for three forklift trucks were analyzed in each operating condition. The vertical WBV magnitudes and Health values for the three trucks were below the CEN test values when the trucks were travelling forwards with a load. The WBV in the anterior-posterior direction had the largest adverse effect on the human body of the three orthogonal directions when the trucks were used for loading and unloading. The results suggest the CEN test can be applied to the evaluation

Investigation of cost effective truck weight enforcement.

DOT National Transportation Integrated Search

2008-01-01

This research investigates the best way to enforce the truck size and weight limits and by doing : so decrease the damage that is being done to Oklahoma's roads and bridges. In the process a : survey of all state DOT's was conducted to help determine...

Hydraulic Hybrid Parcel Delivery Truck Deployment, Testing & Demonstration

DOE Office of Scientific and Technical Information (OSTI.GOV)

Gallo, Jean-Baptiste

2014-03-07

Although hydraulic hybrid systems have shown promise over the last few years, commercial deployment of these systems has primarily been limited to Class 8 refuse trucks. In 2005, the Hybrid Truck Users Forum initiated the Parcel Delivery Working Group including the largest parcel delivery fleets in North America. The goal of the working group was to evaluate and accelerate commercialization of hydraulic hybrid technology for parcel delivery vehicles. FedEx Ground, Purolator and United Parcel Service (UPS) took delivery of the world’s first commercially available hydraulic hybrid parcel delivery trucks in early 2012. The vehicle chassis includes a Parker Hannifin hydraulicmore » hybrid drive system, integrated and assembled by Freightliner Custom Chassis Corp., with a body installed by Morgan Olson. With funding from the U.S. Department of Energy, CALSTART and its project partners assessed the performance, reliability, maintainability and fleet acceptance of three pre-production Class 6 hydraulic hybrid parcel delivery vehicles using information and data from in-use data collection and on-road testing. This document reports on the deployment of these vehicles operated by FedEx Ground, Purolator and UPS. The results presented provide a comprehensive overview of the performance of commercial hydraulic hybrid vehicles in parcel delivery applications. This project also informs fleets and manufacturers on the overall performance of hydraulic hybrid vehicles, provides insights on how the technology can be both improved and more effectively used. The key findings and recommendations of this project fall into four major categories: -Performance, -Fleet deployment, -Maintenance, -Business case. Hydraulic hybrid technology is relatively new to the market, as commercial vehicles have been introduced only in the past few years in refuse and parcel delivery applications. Successful demonstration could pave the way for additional purchases of hydraulic hybrid vehicles

Comparative Study of Hybrid Powertrains on Fuel Saving, Emissions, and Component Energy Loss in HD Trucks

DOE PAGES

Gao, Zhiming; Finney, Charles; Daw, Charles; ...

2014-09-30

We compared parallel and series hybrid powertrains on fuel economy, component energy loss, and emissions control in Class 8 trucks over both city and highway driving. A comprehensive set of component models describing battery energy, engine fuel efficiency, emissions control, and power demand interactions for heavy duty (HD) hybrids has been integrated with parallel and series hybrid Class 8 trucks in order to identify the technical barriers of these hybrid powertrain technologies. The results show that series hybrid is absolutely negative for fuel economy benefit of long-haul trucks due to an efficiency penalty associated with the dual-step conversions of energymore » (i.e. mechanical to electric to mechanical). The current parallel hybrid technology combined with 50% auxiliary load reduction could elevate 5-7% fuel economy of long-haul trucks, but a profound improvement of long-haul truck fuel economy requires additional innovative technologies for reducing aerodynamic drag and rolling resistance losses. The simulated emissions control indicates that hybrid trucks reduce more CO and HC emissions than conventional trucks. The simulated results further indicate that the catalyzed DPF played an important role in CO oxidations. Limited NH 3 emissions could be slipped from the Urea SCR, but the average NH 3 emissions are below 20 ppm. Meanwhile our estimations show 1.5-1.9% of equivalent fuel-cost penalty due to urea consumption in the simulated SCR cases.« less

On-road emission characteristics of VOCs from diesel trucks in Beijing, China

NASA Astrophysics Data System (ADS)

Yao, Zhiliang; Shen, Xianbao; Ye, Yu; Cao, Xinyue; Jiang, Xi; Zhang, Yingzhi; He, Kebin

2015-02-01

This paper is the first in our series of papers aimed at understanding the volatile organic compound (VOC) emissions of vehicles in Beijing by conducting on-board emission measurements. This paper focuses on diesel vehicles. In this work, 18 China III diesel vehicles, including seven light-duty diesel trucks (LDDTs), four medium-duty diesel trucks (MDDTs) and seven heavy-duty diesel trucks (HDDTs), were examined when the vehicles were driven on predesigned fixed test routes in Beijing in China using a portable emissions measurement system (PEMS). Tedlar bag sampling and 2,4-dinitrophenyhydrazine (DNPH) cartridge sampling were used to collect VOC species, and gas chromatography-mass spectrometry (GC/MS) and high-performance liquid chromatography (HPLC) were used to analyze these samples. We obtained the VOC emission factors and relative compositions for diesel trucks of different sizes under different driving patterns. In total, 64 VOC species were quantified in this study, including 25 alkanes, four alkenes, 13 aromatics, 13 carbonyls and nine other compounds. The emission factors of the total VOCs based on mileage traveled for HDDTs were higher than those of LDDTs and MDDTs. Carbonyls, aromatics and alkanes were the dominant VOC species. Carbonyls accounted for 42.7%-69.2% of the total VOCs in the three types of tested diesel trucks. The total VOC emission factors of the tested vehicles that were driven on non-highway routes were 1.5-2.0 times higher than those of the vehicles driven on the highway. As for the OFP calculation results, with increased vehicle size, the ozone formation potential presented an increasing trend. Among the VOC components, carbonyls were the primary contributor to OFP. In addition, the OFPs under non-highway driving cycles were 1.3-1.7 times those under highway driving cycles. The results of this study will be helpful in improving our understanding of VOCs emitted from on-road diesel trucks in China.

Comparison of NOx emissions from China III and China IV in-use diesel trucks based on on-road measurements

NASA Astrophysics Data System (ADS)

Yao, Zhiliang; Wu, Bobo; Wu, Yunong; Cao, Xinyue; Jiang, Xi

2015-12-01

To mitigate NOx and other emissions from diesel vehicles, China I, China II, China III and China IV emissions standards for new vehicles have been implemented nationwide. However, recent on-road measurements using a portable emission measurement system (PEMS) have revealed no significant reductions in the NOx emissions factors of diesel trucks due to the change from China II emissions standards to the more stringent China III standards. Thus, it is important to understand the effect of the China IV emissions standard on NOx emissions. In this study, nine China III and nine China IV diesel trucks of three sizes (light-duty diesel trucks (LDDTs), medium-duty diesel trucks (MDDTs) and heavy-duty diesel trucks (HDDTs)) were tested on real roads in Beijing using a PEMS. Compared to the tested China III diesel trucks, the China IV diesel trucks showed significant reductions of the average NOx emissions factors in terms of both distance travelled and fuel consumption. However, the driving conditions had an important impact on the reduction. Under non-highway driving (NHD), several of the tested China IV diesel trucks experienced no reduction or an increase in NOx emissions compared to their China III counterparts. The NOx emissions factors of the 18 tested diesel trucks under NHD were on average 1.5-times greater than those under highway driving (HD), and the effects on NOx emissions removal from China III to China IV diesel trucks were greater under HD than under NHD. In addition, no significant reduction of NOx based on fuel consumption for China IV diesel trucks was observed for MDDTs and HDDTs compared to the test results for similar China II vehicles reported in a previous study. To reduce NOx emissions in China, additional control measures of vehicular NOx emissions should be formulated.

The influence of daily sleep patterns of commercial truck drivers on driving performance

PubMed Central

Chen, Guang Xiang; Fang, Youjia; Guo, Feng; Hanowski, Richard J.

2016-01-01

Fatigued and drowsy driving has been found to be a major cause of truck crashes. Lack of sleep is the number one cause of fatigue and drowsiness. However, there are limited data on the sleep patterns (sleep duration, sleep percentage in the duration of non-work period, and the time when sleep occurred) of truck drivers in non-work periods and the impact on driving performance. This paper examined sleep patterns of 96 commercial truck drivers during non-work periods and evaluated the influence these sleep patterns had on truck driving performance. Data were from the Naturalistic Truck Driving Study. Each driver participated in the study for approximately four weeks. A shift was defined as a non-work period followed by a work period. A total of 1397 shifts were identified. Four distinct sleep patterns were identified based on sleep duration, sleep start/end point in a non-work period, and the percentage of sleep with reference to the duration of non-work period. Driving performance was measured by safety-critical events, which included crashes, near-crashes, crash-relevant conflicts, and unintentional lane deviations. Negative binomial regression was used to evaluate the association between the sleep patterns and driving performance, adjusted for driver demographic information. The results showed that the sleep pattern with the highest safety-critical event rate was associated with shorter sleep, sleep in the early stage of a non-work period, and less sleep between 1 a.m. and 5 a.m. This study also found that male drivers, with fewer years of commercial vehicle driving experience and higher body mass index, were associated with deteriorated driving performance and increased driving risk. The results of this study could inform hours-of-service policy-making and benefit safety management in the trucking industry. PMID:26954762

The influence of daily sleep patterns of commercial truck drivers on driving performance.

PubMed

Chen, Guang Xiang; Fang, Youjia; Guo, Feng; Hanowski, Richard J

2016-06-01

Fatigued and drowsy driving has been found to be a major cause of truck crashes. Lack of sleep is the number one cause of fatigue and drowsiness. However, there are limited data on the sleep patterns (sleep duration, sleep percentage in the duration of non-work period, and the time when sleep occurred) of truck drivers in non-work periods and the impact on driving performance. This paper examined sleep patterns of 96 commercial truck drivers during non-work periods and evaluated the influence these sleep patterns had on truck driving performance. Data were from the Naturalistic Truck Driving Study. Each driver participated in the study for approximately four weeks. A shift was defined as a non-work period followed by a work period. A total of 1397 shifts were identified. Four distinct sleep patterns were identified based on sleep duration, sleep start/end point in a non-work period, and the percentage of sleep with reference to the duration of non-work period. Driving performance was measured by safety-critical events, which included crashes, near-crashes, crash-relevant conflicts, and unintentional lane deviations. Negative binomial regression was used to evaluate the association between the sleep patterns and driving performance, adjusted for driver demographic information. The results showed that the sleep pattern with the highest safety-critical event rate was associated with shorter sleep, sleep in the early stage of a non-work period, and less sleep between 1 a.m. and 5 a.m. This study also found that male drivers, with fewer years of commercial vehicle driving experience and higher body mass index, were associated with deteriorated driving performance and increased driving risk. The results of this study could inform hours-of-service policy-making and benefit safety management in the trucking industry. Published by Elsevier Ltd.

Parametric Analysis of Light Truck and Automobile Maintenance

DOT National Transportation Integrated Search

1979-05-01

Utilizing the Automotive and Light Truck Service and Repair Data Base developed in the campanion report, parametric analyses were made of the relationships between maintenance costs, schduled and unschduled, and vehicle parameters; body class, manufa...

Driving an Industry: Medium and Heavy Duty Fuel Cell Electric Truck Component Sizing

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kast, James; Marcinkoski, Jason; Vijayagopal, Ram

Medium and heavy duty (MD and HD respectively) vehicles are responsible for 26 percent of the total U.S. transportation petroleum consumption [1]. Hydrogen fuel cells have demonstrated value as part of a portfolio of strategies for reducing petroleum use and emissions from MD and HD vehicles. [2] [3], but their performance and range capabilities, and associated component sizing remain less clear when compared to other powertrains. This paper examines the suitability of converting a representative sample of MD and HD diesel trucks into Fuel Cell Electric Trucks (FCETs), while ensuring the same truck performance, in terms of range, payload, acceleration,more » speed, gradeability and fuel economy.« less

Using truck fleet data in combination with other data sources for freight modeling and planning.

DOT National Transportation Integrated Search

2014-07-01

This project investigated the use of large streams of truck GPS data available from the American Transportation : Research Institute (ATRI) for the following statewide freight modeling and planning applications in Florida: : (1) Average truck speed d...

The risk of injury to children in compact pickup trucks.

PubMed

Winston, Flaura K; Durbin, Dennis

2002-01-01

Nearly one million compact pickup trucks were sold last year in the US. Manufacturers now produce extended-cab models of pickups such as the Ford Ranger, Chevrolet S-10, Dodge Dakota, and Toyota Tacoma that can accommodate at least two rear-seated passengers, making them attractive to families with children. However, the safety of these rear seats for children has not been determined. This Issue Brief summarizes a new study that examines and quantifies the risk of injury to children riding in compact pickup trucks. Based on these findings, parents should be advised against using these vehicles as family transportation.

An extended car-following model considering the appearing probability of truck and driver's characteristics

NASA Astrophysics Data System (ADS)

Rong, Ying; Wen, Huiying

2018-05-01

In this paper, the appearing probability of truck is introduced and an extended car-following model is presented to analyze the traffic flow based on the consideration of driver's characteristics, under honk environment. The stability condition of this proposed model is obtained through linear stability analysis. In order to study the evolution properties of traffic wave near the critical point, the mKdV equation is derived by the reductive perturbation method. The results show that the traffic flow will become more disorder for the larger appearing probability of truck. Besides, the appearance of leading truck affects not only the stability of traffic flow, but also the effect of other aspects on traffic flow, such as: driver's reaction and honk effect. The effects of them on traffic flow are closely correlated with the appearing probability of truck. Finally, the numerical simulations under the periodic boundary condition are carried out to verify the proposed model. And they are consistent with the theoretical findings.

Smart Park : Truck Parking Field Operation Test Results

DOT National Transportation Integrated Search

2011-10-15

As part of its SmartPark program, the Federal Motor Carrier Safety Administration (FMCSA) conducted a field operations test of two technologies, video imaging and magnetometry, to assess their suitability for determining the occupancy of truck parkin...

Lone workers attitudes towards their health: views of Ontario truck drivers and their managers.

PubMed

McDonough, Beatrice; Howard, Michelle; Angeles, Ricardo; Dolovich, Lisa; Marzanek-Lefebvre, Francine; Riva, John J; Laryea, Stephanie

2014-05-14

Truck driving is the second most common occupation among Canadian men. Transportation of goods via roads is of crucial importance for the Canadian economy. The industry is responsible annually for $17 billion in GDP and is projected to increase by 28% over the next 10 years. Recruitment is an issue with 20% of drivers projected to retire or leave the profession in the next 10 years. Despite the reliance on transport truck drivers for the delivery of goods which affects Canada's economy and daily living of residents, little is known about the health care needs of this large cohort of primarily male lone workers from a drivers' perspective. Transport truck drivers are independent workers whose non traditional workplace is their tractor, the truck stops and the journey on the road.The objective of this study was to obtain a contextually informed description of lifestyle issues, health and disease risk factors experienced by drivers and perceived by their managers in the truck driving occupation. Using a grounded theory approach, 4 focus groups were conducted with drivers (n = 16) and managers (n = 10) from two trucking companies in Southwestern Ontario to identify the lived experience of the drivers as it relates to preventable risks to health and wellness. A semi structured guided interview was used to explore the lifestyle context of transport truck driving and organizational aspects of the occupation (workplace culture, working conditions and health and wellness promotion). The predominant themes described stress, workplace, communication, lifestyle, driving culture, family, and fatigue concerns. In terms of the transportation work environment, drivers and managers were aware of the profession's potential to foster lifestyle related chronic diseases but described challenges in making the profession more amenable to a healthy lifestyle. Workplace environmental determinants are significant in shaping health behaviours. Chronic disease health risks were the

Impacts of Aging Emission Control Systems on In-Use Heavy-Duty Diesel Truck Emission Rates

NASA Astrophysics Data System (ADS)

Preble, C.; Cados, T.; Harley, R.; Kirchstetter, T.

2017-12-01

Heavy-duty diesel trucks are a major source of nitrogen oxides (NOx) and black carbon (BC) in urban environments, contributing to persistent ozone and particulate matter air quality problems. Recently, diesel particle filter (DPF) and selective catalytic reduction (SCR) emission control systems have become standard equipment on new trucks. Particle filters can also be installed as a retrofit on older engines. Prior work has shown that exhaust filters and SCR systems effectively reduce BC and NOx emission rates by up to 90 and 80%, respectively (Preble et al., ES&T 2015). There is concern, however, that DPFs may promote the formation of ultrafine particles (UFP) and increase tailpipe emissions of nitrogen dioxide (NO2). Additionally, urea-based SCR systems for NOx control may form nitrous oxide (N2O), an important contributor to stratospheric ozone depletion. The effectiveness of these emission controls has been thoroughly evaluated in the laboratory, but the long-term durability of in-use systems and their impacts on co-emitted species have not been well characterized. To evaluate the in-use performance of DPF and SCR systems, pollutant emissions from thousands of diesel trucks were measured over several years at the Port of Oakland and the Caldecott Tunnel in the San Francisco Bay Area. Pollutants present in the exhaust plumes of individual trucks were measured at high time resolution (≥1 Hz) as trucks passed under a mobile lab stationed on an overpass. Fuel-based emission factors (g pollutant emitted per kg fuel burned) were calculated for individual trucks and linked via recorded license plates to vehicle attributes, including engine model year and installed emission control systems. Use of DPFs reduced the BC emission rate by up to 95% at both locations. SCR systems were more effective at reducing NOx emissions under the uphill, highway driving conditions at the Caldecott Tunnel. The emission rates of co-emitted species NO2, UFP, and N2O depended on driving

75 FR 7426 - Tier 2 Light-Duty Vehicle and Light-Duty Truck Emission Standards and Gasoline Sulfur Control...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-02-19

... 2060-AI23; 2060-AQ12 Tier 2 Light-Duty Vehicle and Light-Duty Truck Emission Standards and Gasoline... February 10, 2000 (65 FR 6698), EPA published emission standards for light-duty vehicles and light-duty... new passenger cars and light trucks, including pickup trucks, vans, minivans, and sport-utility...

Evaluation of large truck crashes at horizontal curves on two-lane rural highways in Kansas.

DOT National Transportation Integrated Search

2012-08-01

The objective of this study was to investigate the relationship between roadway and environment-related factors and truck : crash severity at horizontal curves located on rural, two-lane state highways in Kansas. Single vehicle truck crashes and : mu...

The Impact of Wireless Technology on Loading Trucks at an Auto Parts Distribution Center

ERIC Educational Resources Information Center

Goomas, David T.

2012-01-01

An intervention was introduced for truck loaders that used wireless vehicle mount computers that included auditory, visual feedback, and immediate data delivery. The implementation reliably reduced pallets from being loaded out of sequence for all outbound trucks in multistop routes. The role of the organizational behavior management (OBM)…

Truck size and weight enforcement technologies : implementation plan

DOT National Transportation Integrated Search

2009-06-01

The purpose of this Implementation Plan is to recommend strategies to encourage the deployment of roadside technologies to improve truck size and weight enforcement in the United States. The plan includes strategies that State practitioners can use t...

On the road again: concurrency and condom use among Uganda truck drivers.

PubMed

Costenbader, Elizabeth C; Lancaster, Kathryn; Bufumbo, Leonard; Akol, Angela; Guest, Greg

2015-01-01

Long-distance truck drivers have been shown to be a critical population in the spread of HIV in Africa. In 2009, surveys with 385 Ugandan long-distance truck drivers measured concurrency point prevalence with two methods; it ranged from 37.4% (calendar-method) to 50.1% (direct question). The majority (84%) of relationships reported were long-term resulting in a long duration of overlap (average of 58 months) across concurrent partnerships. Only 7% of these men reported using any condoms with their spouses during the past month. Among all non-spousal relationships, duration of relationship was the factor most strongly associated with engaging in unprotected sex in the past month in a multivariable analyses controlling for partner and relationship characteristics. Innovative intervention programs for these men and their partners are needed that address the realities of truck drivers' lifestyles.

Mapping U.S. long-haul truck drivers' multiplex networks and risk topography in inner-city neighborhoods

PubMed Central

Apostolopoulos, Yorghos; Sönmez, Sevil; Lemke, Michael Kenneth; Rothenberg, Richard B.

2015-01-01

This article illustrates how urban inner-city trucking milieux may influence STI/BBI/HIV acquisition and transmission risks for U.S. long-haul truckers, as well as their social and risk relationships. Using mixed methods, we collected ethnoepidemiological and biological data from long-haul truck drivers and their risk contacts in inner-city trucking milieux in Atlanta, Georgia, United States. Key findings indicate that within the risk-endemic environment of distressed inner-city areas, diverse trucking risk milieux can amplify STI/BBI/HIV risk for multiplex networks of truckers. Inner-city neighborhood location, short geographic distance among risk contacts, and trucker concurrency can potentially exacerbate transmission via bridging higher-risk individuals with lower-risk populations at disparate geographic and epidemiological locations. PMID:25863181

Medium Truck Duty Cycle Data from Real-World Driving Environments: Final Report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Lascurain, Mary Beth; Franzese, Oscar; Capps, Gary J

2012-11-01

Since the early part of the 20th century, the US trucking industry has provided a safe and economical means of moving commodities across the country. At present, nearly 80% of US domestic freight movement involves the use of trucks. The US Department of Energy (DOE) is spearheading a number of research efforts to improve heavy vehicle fuel efficiencies. This includes research in engine technologies (including hybrid and fuel cell technologies), lightweight materials, advanced fuels, and parasitic loss reductions. In addition, DOE is developing advanced tools and models to support heavy vehicle research and is leading the 21st Century Truck Partnershipmore » and the SuperTruck development effort. Both of these efforts have the common goal of decreasing the fuel consumption of heavy vehicles. In the case of SuperTruck, a goal of improving the overall freight efficiency of a combination tractor-trailer has been established. This Medium Truck Duty Cycle (MTDC) project is a critical element in DOE s vision for improved heavy vehicle energy efficiency; it is unique in that there is no other existing national database of characteristic duty cycles for medium trucks based on collecting data from Class 6 and 7 vehicles. It involves the collection of real-world data on medium trucks for various situational characteristics (e.g., rural/urban, freeway/arterial, congested/free-flowing, good/bad weather) and looks at the unique nature of medium trucks drive cycles (stop-and-go delivery, power takeoff, idle time, short-radius trips). This research provides a rich source of data that can contribute to the development of new tools for FE and modeling, provide DOE a sound basis upon which to make technology investment decisions, and provide a national archive of real-world-based medium-truck operational data to support energy efficiency research. The MTDC project involved a two-part field operational test (FOT). For the Part-1 FOT, three vehicles each from two vocations (urban

Evaluation of Prototype Automatic Truck Rollover Warning Systems

DOT National Transportation Integrated Search

1998-01-01

Three operating prototype Automatic Truck Rollover Warning Systems (ATRWS) installed on the Capital Beltway in Maryland and Virginia were evaluated for 3 years. The general objectives of this evaluation were to assess how the ATRWS performed and to d...

Overload truck wheel load distribution on bridge decks.

DOT National Transportation Integrated Search

2009-04-01

There is a need to accurately analyze the load effects on bridge decks from permitted overload trucks on : Michigans roads. The AASHTO Standard Specifications for Highway Bridges, 17th edition, provides a : distribution width of live loads when re...

Seismic hazard assessment of Oregon highway truck routes.

DOT National Transportation Integrated Search

2012-06-01

This research project developed a seismic risk assessment model along the major truck routes in Oregon. The study had adopted federally : developed software tools called Risk for Earthquake Damage to Roadway Systems (REDARS2) and HAZUS-MH. The model ...

Preferential lane use for heavy trucks : final report.

DOT National Transportation Integrated Search

2016-07-01

Freight movement is vital to the state of Texas and the nation. With several major ports, through-truck routes, and distribution centers, Texas roadways carry millions of tons of freight each year. However, congestion on Texas roadways creates delay ...

Market capitalization of the trucking industry sector, 2005

DOT National Transportation Integrated Search

2006-08-01

This report focuses on the market valuation of the overall trucking industry sector and each segment within it. In the past, while the focus has been on stock price appreciation or depreciation, this report emphasizes market capitalization returns. S...

Overview of drug and alcohol use among large truck and bus drivers, 2011–13.

DOT National Transportation Integrated Search

2016-12-01

This report provides a broad overview of drug and alcohol usage among large truck and bus drivers for 201113. Data sources for the overview are: testing results from motor carrier drug testing programs, roadside inspections on large trucks and bus...

76 FR 68220 - Navistar Truck Development and Technology Center; a Subsidiary of Navistar International...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-11-03

... are engaged in activities related to the supply of truck body engineering and design services. During... supply of truck body engineering and design services and/or support services. Based on new information... because a significant number or proportion of workers at Navistar, Meyer Road TA-W-75,151 and Navistar...

Health hazard evaluation report HETA-83-297-1846, truck terminals, St. Louis, Missouri

DOE Office of Scientific and Technical Information (OSTI.GOV)

McConnell, R.S.; Anderson, K.E.

1987-11-01

An evaluation was made of possible exposure to 2,3,7,8-tetrachlorodibenzo-p-dioxin (TCDD) at trucking terminals in St. Louis, Missouri. A self-selected group of workers participated in a medical survey. A significant association was noted between symptoms of numbness in hands and feet, pins and needles in the extremities, insomnia and feelings of depression, and possible exposure to TCDD. One case of porphyria cutanea tarda and one of dermatofibrosarcoma were reported. The patient with porphyria cutanea tarda later developed a pelvic angiosarcoma. Environmental samples revealed a dioxin concentration of about 18.7 parts per billion on the rafters inside a terminal. Dioxin was presentmore » in two surface soil samples taken near an entrance gate. The authors conclude that no definite association between TCDD exposure and symptoms or medical problems can be established. The authors recommended that measures be taken to control or eliminate possible exposures at the terminals.« less

76 FR 22154 - Powered Industrial Trucks Standard; Extension of the Office of Management and Budget's (OMB...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-04-20

... the knowledge, training, and experience to train operators and to evaluate their performance, and... severe injury or death of truck operators and other employees who are in the vicinity of the trucks...

HD Diesel Hybrid Truck Powertrain Study

DTIC Science & Technology

2012-09-11

Z39-18 Command Chain ij Army Materiel Command (AMC) - Huntsville, AL :""V-..... Research, Development & Engineering Command (RDECOM) -Aberdeen, MD...WARFIGHTER FOCUSED. Unclassified Li-lon I Ultracap Hybrid Energy Storage Microgrids Radiators Power Controllers for Power Management JP-8 Fuel...hybrid electric vehicle ( Honda Insight) entered this market in 1999 while the first commercial diesel-electric hybrid truck was produced by Navistar in

a Simplified Method to Design Suspended Cabs for Counterbalance Trucks

NASA Astrophysics Data System (ADS)

LEMERLE, P.; BOULANGER, P.; POIROT, R.

2002-05-01

A “low-frequency” suspension system, placed between the driving cab and chassis of an existing fork lift truck was designed. The aim of this project was to develop a design procedure which is easy to implement and suitable for all types of fork lift trucks. It was also to show how the use of numerical simulation could be helpful to optimize the efficiency of such suspension systems. The cab specifications were: (1) to achieve a vertical vibration attenuation of at least 50% when this truck is tested under severe but realistic conditions, (2) to operate with no specific adjustment for drivers weighing between 60 and 100 kg, (3) to be efficient with a reasonable dynamic stroke (about 3 cm maximum). The suspended cab was modelled using ADAMS software. In the simplified method, the input acceleration signals (at the four fixing points of the cab) were not computed from a vehicle model (chassis and wheels) but directly measured under various driving conditions (passage of two or four wheels over an obstacle with a loaded or unloaded fork lift truck). This model allowed evaluation of the theoretical attenuation, obtained below the driver's seat along the three axes, in comparison with an infinitely rigid suspension. The attenuation ratio was calculated for several values of the characteristics of the suspension components (stiffness and damping). Similarly, for every design value tested, the design constraints were evaluated and at the end of this parametrical study, optimal suspension components were found. Finally, the suspended cab was built according to the results of the parametrical study and measurements subsequently confirmed that the attenuation of vertical accelerations was more than 50%.

Truck Noise X : Noise Reduction Options for Diesel Powered International Harvester Trucks : Volume 2. Cost-Noise Analysis and Field Installation.

DOT National Transportation Integrated Search

1977-04-01

Noise reduction option development work was carried out on two inservice diesel powered IH trucks, consisting of a Cab-over model and a Conventional model with a baseline exterior noise level of 87 dB(A) each. Since no specific noise goals were set, ...

Health survey of U.S. long-haul truck drivers: work environment, physical health, and healthcare access.

PubMed

Apostolopoulos, Yorghos; Sönmez, Sevil; Shattell, Mona M; Gonzales, Clifford; Fehrenbacher, Caitlin

2013-01-01

While trucking in industrialized nations is linked with driver health afflictions, the role of trucking in U.S. truckers' health remains largely unknown. This paper sheds light on links between the trucking work environment and drivers' physical health. Using a cross-sectional design, 316 truckers were enrolled in the Healthy Trucker Survey. Questions included work history, physical and mental health, and healthcare access. PASW 18 was used to examine patterns among factors. 316 truckers participated. Respondents were mainly full-time, long-haul drivers with over 5 years of experience, and who spent over 17 days on the road per month. While almost 75% described their health as good, 83.4% were overweight/obese, 57.9% had sleeping disturbances, 56.3% fatigue, 42.3% musculoskeletal disorders, and about 40% cardiovascular disease concerns. About 33% had no health insurance, 70% had no regular healthcare visits, 24.4% could not afford insurance, and 42.1% took over-the-counter drugs when sick, while 20.1% waited to reach home for medical care. Exercise facilities were unavailable in over 70% of trucking worksites and 70% of drivers did not exercise regularly. The trucking occupation places drivers at high risk for poor health outcomes. Prospective studies are needed to delve into how continued exposure to trucking influences the progression of disease burden.

Effects of truck traffic on crash injury severity on rural highways in Wyoming using Bayesian binary logit models.

PubMed

Ahmed, Mohamed M; Franke, Rebecca; Ksaibati, Khaled; Shinstine, Debbie S

2018-08-01

Roadway safety is an integral part of a functioning infrastructure. A major use of the highway system is the transport of goods. The United States has experienced constant growth in the amount of freight transported by truck in the last few years. Wyoming is experiencing a large increase in truck traffic on its local and county roads due to an increase in oil and gas production. This study explores the involvement of heavy trucks in crashes and their significance as a predictor of crash severity and addresses the effect that large truck traffic is having on the safety of roadways for various road classifications. Studies have been done on the factors involved in and the causation of heavy truck crashes, but none address the causation and effect of roadway classifications on truck crashes. Binary Logit Models (BLM) with Bayesian inferences were utilized to classify heavy truck involvement in severe and non-severe crashes using ten years (2002-2011) of historical crash data in the State of Wyoming. From the final main effects model, various interactions proved to be significant in predicting the severity of crashes and varied depending on the roadway classification. The results indicated the odds of a severe crash increase to 2.3 and 4.5 times when a heavy truck is involved on state and interstate highways respectively. The severity of crashes is significantly increased when road conditions were not clear, icy, and during snowy weather conditions. Copyright © 2018 Elsevier Ltd. All rights reserved.

Case Study: Natural Gas Regional Transport Trucks

DOE Office of Scientific and Technical Information (OSTI.GOV)

Laughlin, M.; Burnham, A.

2016-08-01

Learn about Ryder System, Inc.'s experience in deploying nearly 200 CNG and LNG heavy-duty trucks and construction and operation of L/CNG stations using ARRA funds. Using natural gas in its fleet, Ryder mitigated the effects of volatile fuel pricing and reduced lifecycle GHGs by 20% and petroleum by 99%.

Effects of Particle Filters and Selective Catalytic Reduction on In-Use Heavy-Duty Diesel Truck Emissions

NASA Astrophysics Data System (ADS)

Preble, C.; Cados, T.; Harley, R.; Kirchstetter, T.

2016-12-01

Heavy-duty diesel trucks (HDDT) are a major source of nitrogen oxides (NOx) and black carbon (BC) in urban environments, contributing to persistent ozone and particulate matter air quality problems. Diesel particle filters (DPFs) and selective catalytic reduction (SCR) systems that target PM and NOx emissions, respectively, have recently become standard equipment on new HDDT. DPFs can also be installed on older engines as a retrofit device. Previous work has shown that DPF and SCR systems can reduce NOx and BC emissions by up to 70% and 90%, respectively, compared to modern trucks without these after-treatment controls (Preble et al., ES&T 2015). DPFs can have the undesirable side-effect of increasing ultrafine particle (UFP) and nitrogen dioxide (NO2) emissions. While SCR systems can partially mitigate DPF-related NO2 increases, these systems can emit nitrous oxide (N2O), a potent greenhouse gas. We report new results from a study of HDDT emissions conducted in fall 2015 at the Port of Oakland and Caldecott Tunnel in California's San Francisco Bay Area. We report pollutant emission factors (g kg-1) for emitted NOx, NO2, BC, PM2.5, UFP, and N2O on a truck-by-truck basis. Using a roadside license plate recognition system, we categorize each truck by its engine model year and installed after-treatment controls. From this, we develop emissions profiles for trucks with and without DPF and SCR. We evaluate the effectiveness of these devices as a function of their age to determine whether degradation is an issue. We also compare the emission profiles of trucks traveling at low speeds along a level, arterial road en route to the port and at high speeds up a 4% grade highway approaching the tunnel. Given the climate impacts of BC and N2O, we also examine the global warming potential of emissions from trucks with and without DPF and SCR.

Association between travel length and drug use among Brazilian truck drivers.

PubMed

Sinagawa, Daniele Mayumi; De Carvalho, Heráclito Barbosa; Andreuccetti, Gabriel; Do Prado, Natanael Vitoriano; De Oliveira, Keziah Cristina Barbosa Gruber; Yonamine, Mauricio; Muñoz, Daniel Romero; Gjerde, Hallvard; Leyton, Vilma

2015-01-01

To investigate whether the use of the stimulants amphetamines and cocaine by truck drivers in Brazil was related to travel length. Truck drivers were randomly stopped by the Federal Highway Police on interstate roads in Sao Paulo State during morning hours from 2008 to 2011 and invited to participate in the project "Comandos de Saúde nas Rodovias" (Health Commands on the Roads). Participants were asked about the use of drugs, travel distance, and age, and gender was recorded. Samples of urine were collected and analyzed for amphetamine, benzoylecgonine (a metabolite of cocaine), and carboxytetrahydrocannabinol (THC-COOH; a metabolite of cannabis) by immunological screening and quantification by gas chromatography-mass spectroscopy. Current use of amphetamine, cocaine, and cannabis was reported by 5.7%, 0.7%, and 0.3% of the truck drivers, respectively. Amphetamine, benzoylecgonine, and THC-COOH were found in urine samples from 5.4%, 2.6,% and in 1.0% of the drivers, respectively. There was a significant association between the positive cases for amphetamine and reported travel length; 9.9% of urine samples from drivers who reported travel length of more than 270 km were positive for amphetamine, and 10.9% of those drivers reported current use of amphetamines. In most cases, appetite suppressants containing amphetamines had been used, but the purpose was most often to stay awake and alert while driving. Truck drivers with travel length of more than 270 km had significantly higher odds ratio (OR) for having a urine sample that was positive for amphetamine when adjusted for age as confounding factor (OR = 9.41, 95% confidence interval [CI], 3.97-22.26). No significant association was found between the use of cocaine or cannabis and travel length. Truck drivers who reported driving more than 270 km had significantly higher frequencies of urine samples positive for amphetamine and reported significantly more frequent current use of amphetamines than those who reported

Driving fatigue in professional drivers: a survey of truck and taxi drivers.

PubMed

Meng, Fanxing; Li, Shuling; Cao, Lingzhi; Li, Musen; Peng, Qijia; Wang, Chunhui; Zhang, Wei

2015-01-01

Fatigue among truck drivers has been studied extensively; however, less is known regarding the fatigue experience of taxi drivers in heavily populated metropolitan areas. This study aimed to compare the differences and similarities between truck and taxi driver fatigue to provide implications for the fatigue management and education of professional drivers. A sample of 274 truck drivers and 286 taxi drivers in Beijing was surveyed via a questionnaire, which included items regarding work characteristics, fatigue experience, accident information, attitude toward fatigue, and methods of counteracting fatigue. Driver fatigue was prevalent among professional drivers, and it was even more serious for taxi drivers. Taxi drivers reported more frequent fatigue experiences and were involved in more accidents. Among the contributing factors to fatigue, prolonged driving time was the most important factor identified by both driver groups. Importantly, the reason for the engagement in prolonged driving was neither due to the lack of awareness concerning the serious outcome of fatigue driving nor because of their poor detection of fatigue. The most probable reason was the optimism bias, as a result of which these professional drivers thought that fatigue was more serious for other drivers than for themselves, and they thought that they were effective in counteracting the effect of fatigue on their driving performance. Moreover, truck drivers tended to employ methods that require stopping to counteract fatigue, whereas taxi drivers preferred methods that were simultaneous with driving. Although both driver groups considered taking a nap as one of the most effective means to address fatigue, this method was not commonly used. Interestingly, these drivers were aware that the methods they frequently used were not the most effective means to counteract fatigue. This study provides knowledge on truck and taxi drivers' characteristics in fatigue experience, fatigue attitude, and

75 FR 49528 - Watkins Shepard Trucking, Inc. Including Individuals Under Its Operation Control, Missoula, MT...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-08-13

... DEPARTMENT OF LABOR Employment and Training Administration [TA-W-73,859] Watkins Shepard Trucking... to Apply for Worker Adjustment Assistance on July 14, 2010, applicable to workers of Watkins Shepard... the Department's certification is to include all workers of Watkins Shepard Trucking, Inc., Missoula...

Past and Future Trends in Light Truck Sales.

DOT National Transportation Integrated Search

1981-08-01

This report uses the Wharton EFA Motor Vehicle Demand Model (Mark II) and its associated databases to discuss and analyze past and future trends in the Light Duty Truck market. The dynamic historical growth in this market and its implications for ene...

Cost of Large Truck-and Bus-Involved Crashes

DOT National Transportation Integrated Search

2001-03-01

Crashes involving trucks and buses with gross weight ratings over 10,000 pounds impose a variety of costs on the drivers of those vehicles; other drivers, involved either directly or indirectly in the crashes; and society as a whole. Such costs inclu...

Truck crash severity in New York city: An investigation of the spatial and the time of day effects.

PubMed

Zou, Wei; Wang, Xiaokun; Zhang, Dapeng

2017-02-01

This paper investigates the differences between single-vehicle and multi-vehicle truck crashes in New York City. The random parameter models take into account the time of day effect, the heterogeneous truck weight effect and other influencing factors such as crash characteristics, driver and vehicle characteristics, built environment factors and traffic volume attributes. Based on the results from the co-location quotient analysis, a spatial generalized ordered probit model is further developed to investigate the potential spatial dependency among single-vehicle truck crashes. The sample is drawn from the state maintained incident data, the publicly available Smart Location Data, and the BEST Practices Model (BPM) data from 2008 to 2012. The result shows that there exists a substantial difference between factors influencing single-vehicle and multi-vehicle truck crash severity. It also suggests that heterogeneity does exist in the truck weight, and it behaves differently in single-vehicle and multi-vehicle truck crashes. Furthermore, individual truck crashes are proved to be spatially dependent events for both single and multi-vehicle crashes. Last but not least, significant time of day effects were found for PM and night time slots, crashes that occurred in the afternoons and at nights were less severe in single-vehicle crashes, but more severe in multi-vehicle crashes. Copyright © 2016. Published by Elsevier Ltd.

Naturalistic drive cycle synthesis for pickup trucks.

PubMed

Liu, Zifan; Ivanco, Andrej; Filipi, Zoran

2015-09-01

Future pick-up trucks are meeting much stricter fuel economy and exhaust emission standards. Design tradeoffs will have to be carefully evaluated to satisfy consumer expectations within the regulatory and cost constraints. Boundary conditions will obviously be critical for decision making: thus, the understanding of how customers are driving in naturalistic settings is indispensable. Federal driving schedules, while critical for certification, do not capture the richness of naturalistic cycles, particularly the aggressive maneuvers that often shape consumer perception of performance. While there are databases with large number of drive cycles, applying all of them directly in the design process is impractical. Therefore, representative drive cycles that capture the essence of the naturalistic driving should be synthesized from naturalistic driving data. Naturalistic drive cycles are firstly categorized by investigating their micro-trip components, defined as driving activities between successive stops. Micro-trips are expected to characterize underlying local traffic conditions, and separate different driving patterns. Next, the transitions from one vehicle state to another vehicle state in each cycle category are captured with Transition Probability Matrix (TPM). Candidate drive cycles can subsequently be synthesized using Markov Chain based on TPMs for each category. Finally, representative synthetic drive cycles are selected through assessment of significant cycle metrics to identify the ones with smallest errors. This paper provides a framework for synthesis of representative drive cycles from naturalistic driving data, which can subsequently be used for efficient optimization of design or control of pick-up truck powertrains. Manufacturers will benefit from representative drive cycles in several aspects, including quick assessments of vehicle performance and energy consumption in simulations, component sizing and design, optimization of control strategies, and

Modeling Particle Exposure in US Trucking Terminals

PubMed Central

Davis, ME; Smith, TJ; Laden, F; Hart, JE; Ryan, LM; Garshick, E

2007-01-01

Multi-tiered sampling approaches are common in environmental and occupational exposure assessment, where exposures for a given individual are often modeled based on simultaneous measurements taken at multiple indoor and outdoor sites. The monitoring data from such studies is hierarchical by design, imposing a complex covariance structure that must be accounted for in order to obtain unbiased estimates of exposure. Statistical methods such as structural equation modeling (SEM) represent a useful alternative to simple linear regression in these cases, providing simultaneous and unbiased predictions of each level of exposure based on a set of covariates specific to the exposure setting. We test the SEM approach using data from a large exposure assessment of diesel and combustion particles in the US trucking industry. The exposure assessment includes data from 36 different trucking terminals across the United States sampled between 2001 and 2005, measuring PM2.5 and its elemental carbon (EC), organic carbon (OC) components, by personal monitoring, and sampling at two indoor work locations and an outdoor “background” location. Using the SEM method, we predict: 1) personal exposures as a function of work related exposure and smoking status; 2) work related exposure as a function of terminal characteristics, indoor ventilation, job location, and background exposure conditions; and 3) background exposure conditions as a function of weather, nearby source pollution, and other regional differences across terminal sites. The primary advantage of SEMs in this setting is the ability to simultaneously predict exposures at each of the sampling locations, while accounting for the complex covariance structure among the measurements and descriptive variables. The statistically significant results and high R2 values observed from the trucking industry application supports the broader use of this approach in exposure assessment modeling. PMID:16856739

Crash compatibility between cars and light trucks: benefits of lowering front-end energy-absorbing structure in SUVs and pickups.

PubMed

Baker, Bryan C; Nolan, Joseph M; O'Neill, Brian; Genetos, Alexander P

2008-01-01

Passenger vehicles are designed to absorb crash energy in frontal crashes through deformation or crush of energy-absorbing structures forward of the occupant compartment. In collisions between cars and light trucks (i.e., pickups and SUVs), however, the capacity of energy-absorption structures may not be fully utilized because mismatches often exist between the heights of these structures in the colliding vehicles. In 2003 automakers voluntarily committed to new design standards aimed at reducing the height mismatches between cars and light trucks. By September 2009 all new light trucks will have either the primary front structure (typically the frame rails) or a secondary structure connected to the primary structure low enough to interact with the primary structures in cars, which for most cars is about the height of the front bumper. To estimate the overall benefit of the voluntary commitment, the real-world crash experience of light trucks already meeting the height-matching criteria was compared with that of light trucks not meeting the criteria for 2000-2003 model light trucks in collisions with passenger cars during calendar years 2001-2004. The estimated benefits of lower front energy-absorbing structure were a 19 percent reduction (p<0.05) in fatality risk to belted car drivers in front-to-front crashes with light trucks and a 19 percent reduction (p<0.05) in fatality risk to car drivers in front-to-driver-side crashes with light trucks.

Impact of trucking network flow on preferred biorefinery locations in the southern United States

Treesearch

Timothy M. Young; Lee D. Han; James H. Perdue; Stephanie R. Hargrove; Frank M. Guess; Xia Huang; Chung-Hao Chen

2017-01-01

The impact of the trucking transportation network flow was modeled for the southern United States. The study addresses a gap in existing research by applying a Bayesian logistic regression and Geographic Information System (GIS) geospatial analysis to predict biorefinery site locations. A one-way trucking cost assuming a 128.8 km (80-mile) haul distance was estimated...

Lone workers attitudes towards their health: views of Ontario truck drivers and their managers

PubMed Central

2014-01-01

Background Truck driving is the second most common occupation among Canadian men. Transportation of goods via roads is of crucial importance for the Canadian economy. The industry is responsible annually for $17 billion in GDP and is projected to increase by 28% over the next 10 years. Recruitment is an issue with 20% of drivers projected to retire or leave the profession in the next 10 years. Despite the reliance on transport truck drivers for the delivery of goods which affects Canada’s economy and daily living of residents, little is known about the health care needs of this large cohort of primarily male lone workers from a drivers’ perspective. Transport truck drivers are independent workers whose non traditional workplace is their tractor, the truck stops and the journey on the road. The objective of this study was to obtain a contextually informed description of lifestyle issues, health and disease risk factors experienced by drivers and perceived by their managers in the truck driving occupation. Methods Using a grounded theory approach, 4 focus groups were conducted with drivers (n = 16) and managers (n = 10) from two trucking companies in Southwestern Ontario to identify the lived experience of the drivers as it relates to preventable risks to health and wellness. A semi structured guided interview was used to explore the lifestyle context of transport truck driving and organizational aspects of the occupation (workplace culture, working conditions and health and wellness promotion). Results The predominant themes described stress, workplace, communication, lifestyle, driving culture, family, and fatigue concerns. In terms of the transportation work environment, drivers and managers were aware of the profession’s potential to foster lifestyle related chronic diseases but described challenges in making the profession more amenable to a healthy lifestyle. Conclusions Workplace environmental determinants are significant in shaping health

Commercial Truck Driver Health and Safety: Exploring Distracted Driving Performance and Self-Reported Driving Skill.

PubMed

Stavrinos, Despina; Heaton, Karen; Welburn, Sharon C; McManus, Benjamin; Griffin, Russell; Fine, Philip R

2016-08-01

Reducing distracters detrimental to commercial truck driving is a critical component of improving the safety performance of commercial drivers, and makes the highways safer for all drivers. This study used a driving simulator to examine effects of cell phone, texting, and email distractions as well as self-reported driver optimism bias on the driving performance of commercial truck drivers. Results revealed that more visually demanding tasks were related to poorer driving performance. However, the cell phone task resulted in less off-the-road eye glances. Drivers reporting being "very skilled" displayed poorer driving performance than those reporting being "skilled." Onboard communication devices provide a practical, yet visually and manually demanding, solution for connecting drivers and dispatchers. Trucking company policies should minimize interaction between dispatchers and drivers when the truck is in motion. Training facilities should integrate driving simulators into the instruction of commercial drivers, targeting over-confident drivers. © 2016 The Author(s).

Total Quality Management in Logistics: A Case Study from the Trucking Industry

DTIC Science & Technology

1992-06-01

Quality Management (TQM) movement on the logistics industry as a whole, and, more specifically, its impact within the trucking industry. Its focus then narrows to study the practical aspects of implementing a W. Edwards Deming-based quality program within a particular trucking company, Mason Transporters, Inc. The effectiveness of the company’s implementation effort is assessed using data collected from a survey questionnaire, formal interviews, and personal observations during an on- site visit. Successes and shortcomings of the implementation process are highlighted

Particulate matters from diesel heavy duty trucks exhaust versus cigarettes emissions: a new educational antismoking instrument.

PubMed

De Marco, Cinzia; Ruprecht, Ario Alberto; Pozzi, Paolo; Munarini, Elena; Ogliari, Anna Chiara; Mazza, Roberto; Boffi, Roberto

2015-01-01

Indoor smoking in public places and workplaces is forbidden in Italy since 2003, but some health concerns are arising from outdoor secondhand smoke (SHS) exposure for non-smokers. One of the biggest Italian Steel Manufacturer, with several factories in Italy and abroad, the Marcegaglia Group, recently introduced the outdoor smoking ban within the perimeter of all their factories. In order to encourage their smoker employees to quit, the Marcegaglia management decided to set up an educational framework by measuring the PM1, PM2.5 and PM10 emissions from heavy duty trucks and to compare them with the emissions of cigarettes in an indoor controlled environment under the same conditions. The exhaust pipe of two trucks powered by a diesel engine of about 13.000/14.000 cc(3) were connected with a flexible hose to a hole in the window of a container of 36 m(3) volume used as field office. The trucks operated idling for 8 min and then, after adequate office ventilation, a smoker smoked a cigarette. Particulate matter emission was thereafter analyzed. Cigarette pollution was much higher than the heavy duty truck one. Mean of the two tests was: PM1 truck 125.0(47.0), cigarettes 231.7(90.9) p = 0.002; PM2.5 truck 250.8(98.7), cigarettes 591.8(306.1) p = 0.006; PM10 truck 255.8(52.4), cigarettes 624.0(321.6) p = 0.002. Our findings may be important for policies that aim reducing outdoor SHS exposure. They may also help smokers to quit tobacco dependence by giving them an educational perspective that rebuts the common alibi that traffic pollution is more dangerous than cigarettes pollution.

Examining the impact of opioid analgesics on crash responsibility in truck drivers involved in fatal crashes.

PubMed

Reguly, Paula; Dubois, Sacha; Bédard, Michel

2014-01-01

Commercial motor vehicle (CMV) drivers, particularly drivers of large trucks continue to be a population of concern regarding traffic safety despite the reduction in large truck crash rates over the past decade. Medication and drug use while driving is one important risk factor for large truck crashes. Work-related exposures, such as vibration, manual handling and poor ergonomics contribute to an increased risk for injuries and chronic conditions and are common reasons for opioid analgesic (OA) use by CMV truck drivers. The objectives of this study were to examine the role of OA use in CMV truck drivers involved in fatal crashes by: (a) generating prevalence estimates of OA use; (b) documenting the relationship between OA use and crash responsibility. Case-control study using logistic regression to compare Fatality Analysis Reporting System (1993-2008) record of one or more crash-related unsafe driver actions (UDAs--a proxy measure of responsibility) between drivers with a positive drug test and drivers with a negative drug test for OA, controlling for age, other drug use, and driving history. The annual prevalence of OA use among all CMV drivers of large trucks involved in fatal crashes did not exceed 0.46% for any year in the study period and mostly ranged between 0.1 and 0.2%. Male truck drivers using OA had greater odds of committing an UDA (OR: 2.80; 95% CI: 1.64; 4.81). Middle-aged users had greater odds than younger or older users. The results of our study indicate that the presence of OAs is associated with greater odds of committing an UDA. This association may have implications for the commercial transport industry and traffic safety. However, the limited prevalence of OA use is encouraging and further research is needed to address the limitations of the study. Copyright © 2013 Elsevier Ireland Ltd. All rights reserved.

Elemental carbon and PM(2.5 )levels in an urban community heavily impacted by truck traffic.

PubMed Central

Lena, T Suvendrini; Ochieng, Victor; Carter, Majora; Holguín-Veras, José; Kinney, Patrick L

2002-01-01

Hunts Point, a 690-acre peninsula in the South Bronx, New York City, is a hub in the tristate (New York, New Jersey, and Connecticut) freight transportation system. This study was carried out in response to community concerns about potential health effects of exposure to diesel exhaust particulate (DEP). We measured particulate matter < 2.5 microm in aerodynamic diameter (PM(2.5)) and elemental carbon (EC) on sidewalks and tested whether spatial variations in concentrations were related to local truck traffic density. Ten-hour integrated air samples for EC and PM(2.5) were collected for 9 days over a 3-week period in the summer of 1999 at seven geographically distinct intersections. Simultaneous traffic counts were carried out for each sampling event. Traffic was classified into three classes: passenger cars, small trucks, and large trucks (diesel vehicles). Mean diesel vehicle volumes ranged from 9.3 to 276.5 vehicles/hr across sites. Mean EC concentrations by site ranged from 2.6 microg/m(3) at the control site to 7.3 microg/m(3) along a designated truck route. Linear regression of site-specific mean EC concentration on mean large truck counts predicted an increase of 1.69 microg/m(3) EC per 100 large trucks/hr (SE = 0.37; p = 0.01; R(2) = 0.84). Average PM(2.5) concentrations by site ranged 1.6-fold (19.0-29.9 microg/m(3)) and were more weakly associated with local traffic. Variations over time for PM(2.5 )were more pronounced, ranging almost 4-fold (8.9-34.4 microg/m(3)). These results show that airborne EC concentrations, an important component of DEP, are elevated in Hunts Point and that the impact varies across the community as a function of large truck traffic. PMID:12361926

Fatal crashes involving large trucks, 2015 : analysis brief.

DOT National Transportation Integrated Search

2017-04-01

In 2015, 32,166 fatal crashes took place on our Nations roadways, with 11.2 percent (3,598) involving at least one large truck (see Figure 1). This report examines the various ways of looking at fatal crashes and presents a variety of crash rates ...

U10 : Trusted Truck(R) II (phase B).

DOT National Transportation Integrated Search

2009-01-01

Phase B of the Trusted Truck II project built on the system developed in Phase A (or Year 1). For the implementation portion of the project, systems were added to the trailer to provide additional diagnostic trailer data that can be sent to the TTM...

A Qualitative Study of Migrant-related Stressors, Psychosocial Outcomes and HIV Risk Behavior among Truck Drivers in Zambia

PubMed Central

Ncube, Nomagugu; Simona, Simona J.; Kansankala, Brian; Sinkala, Emmanuel; Raidoo, Jasmin

2017-01-01

Truck drivers are part of mobile populations which have been noted as a key population at risk of HIV in Zambia. This study was aimed at 1) determining Potentially Traumatic Events (PTEs), labor migrant-related stressors, psychosocial problems and HIV risk behaviors among truck drivers in Zambia and 2) examining the relationship between PTEs, migrant-related stressors, psychosocial outcomes and HIV sexual risk behavior among truck drivers in Zambia. We conducted fifteen semi-structured interviews with purposively sampled male truck drivers at trucking companies in Lusaka, Zambia. Findings indicate that truck drivers experience multiple stressors and potentially traumatic incidences, including delays and long waiting hours at borders, exposure to crime and violence, poverty, stress related to resisting temptation of sexual interactions with sex workers or migrant women, and job-related safety concerns. Multiple psychosocial problems such as intimate partner violence, loneliness, anxiety and depression-like symptoms were noted. Transactional sex, coupled with inconsistent condom use were identified as HIV sexual risk behaviors. Findings suggest the critical need to develop HIV prevention interventions which account for mobility, potentially traumatic events, psychosocial problems, and the extreme fear of HIV testing among this key population. PMID:27681145

Developing a model law restricting the transporting of passengers in the cargo areas of pickup trucks.

PubMed

Christoffel, T; Agran, P; Winn, D; Anderson, C; Del Valle, C

2000-01-01

Pickup trucks have become increasingly popular in the United States, accounting for about one in five vehicles involved in fatal motor-vehicle crashes. A critical factor in these deaths is the practice of carrying passengers in truck cargo areas, which are not designed for this purpose. Each year approximately 200 deaths occur to occupants riding in the back of pickup trucks. Over half the states have laws dealing with preventable injury problem, but these laws vary widely and most are too limited to be effective. We have reviewed existing laws, as well as crash injury data, and we have developed and recommend a model bill. The bill focuses on intended use, restricting passengers to only those portions of a vehicle designed for human transport. We have also conducted and report on a survey of legislative sponsors of pickup truck legislation.

Health Promotion at the Construction Work Site: The Lunch Truck Pilot Study.

PubMed

Caban-Martinez, Alberto J; Moore, Kevin J; Clarke, Tainya C; Davila, Evelyn P; Clark, John D; Lee, David J; Fleming, Lora E

2018-04-01

The transient nature of construction work makes it difficult to conduct longitudinal worksite-based health promotion activities. As part of a workplace health assessment pilot study, we worked with a commercial lunch truck company to disseminate four types of health education materials including cancer screening, workplace injury prevention, fruit and vegetable consumption, and smoking cessation to construction workers purchasing food items from the truck during their job breaks. Two weeks following the worksite assessment, we followed up with these workers to ascertain their use of the health promotion materials. Of the 54 workers surveyed, 83% reported reviewing and sharing the cancer screening materials with their families, whereas 44% discussed the cancer screening materials with coworkers. Similar proportions of workers reviewed, shared, and discussed the other health promotion materials with their family. Lunch trucks may be an effective strategy and delivery method for educating construction workers on healthy behaviors and injury prevention practices.

Wheelbarrow tire explosion causing trauma to the forearm and hand: a case report

PubMed Central

2009-01-01

Introduction Tire explosion injuries are rare, but they may result in a severe injury pattern. Case reports and statistics from injuries caused by exploded truck tires during servicing are established, but trauma from exploded small tires seems to be unknown. Case presentation A 47-year-old german man inflated a wheelbarrow tire. The tire exploded during inflation and caused an open, multiple forearm and hand injury. Conclusion Even small tires can cause severe injury patterns in the case of an explosion. High inflating pressures and low safety distances are the main factors responsible for this occurrence. Broad safety information and suitable filling devices are indispensable for preventing these occurrences. PMID:19946543

Assessing the determinants of safety in the trucking industry

DOT National Transportation Integrated Search

2000-04-01

Using data from the 1997 Survey of Drivers conducted : by the University of Michigan Trucking : Industry Program, we identify the factors which : substantially affect three safety measures: accidents, : moving violations, and hours of service violati...

2016 pocket guide to large truck and bus statistics.

DOT National Transportation Integrated Search

2016-05-01

FMCSA created and maintains the Motor Carrier Management Information System (MCMIS). MCMIS contains information on the safety performance of commercial motor carriers (large trucks and buses) and hazardous materials (HM) carriers subject to the Feder...

2017 Pocket Guide to Large Truck and Bus Statistics.

DOT National Transportation Integrated Search

2017-06-01

FMCSA created and maintains the Motor Carrier Management Information System (MCMIS). MCMIS contains information on the safety performance of commercial motor carriers (large trucks and buses) and hazardous materials (HM) carriers subject to the Feder...

Estimation of the full marginal costs of port related truck traffic.

PubMed

Berechman, Joseph

2009-11-01

NY region is expected to grow by additional 1 million people by 2020, which translates into roughly 70 million more tons of goods to be delivered annually. Due to lack of rail capacity, mainly trucks will haul this volume of freight, challenging an already much constrained highway network. What are the total costs associated with this additional traffic, in particular, congestion, safety and emission? Since a major source of this expected flow is the Port of New York-New Jersey, this paper focuses on the estimation of the full marginal costs of truck traffic resulting from the further expansion of the port's activities.

Analysis of driver critical reason and years of driving experience in large truck crashes, analysis brief.

DOT National Transportation Integrated Search

2017-01-01

The 2005 Large Truck Crash Causation Study (LTCCS)i was the first-ever national study to attempt to determine the critical reasons and associated factors that contribute to serious large truck crashes. The LTCCS defines critical reason as the r...

A simulation analysis of traffic flow elements for restricted truck lanes on interstate highways in Virginia.

DOT National Transportation Integrated Search

1999-01-01

In recent years, increases in truck traffic on Virginia's highways have raised issues concerning safety and capacity on interstates such as I-81 and I-95. Lane restrictions represent a strategy that is intended to reduce conflicts between trucks and ...

Contributions of Diesel Truck Emissions to Indoor Elemental Carbon Concentrations in Home Proximate to Ambassador Bridge

EPA Science Inventory

Ambassador Bridge, connecting Detroit, Michigan and Windsor, Ontario, is the busiest international commercial vehicle crossing in North America, with a large percentage of heavy duty diesel trucks. This study seeks to examine the contribution of diesel truck traffic across Ambass...

Commercial Truck/Equipment Technician. Occupational Competency Analysis Profile.

ERIC Educational Resources Information Center

Ohio State Univ., Columbus. Vocational Instructional Materials Lab.

This Occupational Competency Analysis Profile (OCAP) for commercial truck and equipment technician is an employer-verified competency list that evolved from a modified DACUM (Developing a Curriculum) job analysis process involving business, industry, labor, and community agency representatives throughout Ohio. The task list of the National…

A stump-to-truck cost estimating program for cable logging young-growth Douglas-fir

Treesearch

Chris B. LeDoux

1989-01-01

WCOST is a computer program designed to estimate the stump-to-truck logging cost of cable logging young-growth Douglas-fir. The program uses data from stand inventory, cruise data, and the logging plan for the tract in question to produce detailed stump-to-truck cost estimates for specific proposed timber sales. These estimates are then used, in combination with...

I-25 truck safety improvements project : local evaluation report

DOT National Transportation Integrated Search

2004-12-29

The I-25 Truck Safety Improvements project (I-25 TSIP) is the result of a FY98 congressionally designated earmark to support improvements in transportation efficiency, promote safety, increase traffic flow, reduce emissions, improve traveler informat...

Limiting Forces on Transit Trucks in Steady-State Curving

DOT National Transportation Integrated Search

1981-05-01

This study develops conservative bounds on wheel/rail forces and flange forces for several types of rigid and flexible trucks in steady-state curving conditions. The approximate analysis presented provides closed-form relations for estimating forces,...

49 CFR 393.128 - What are the rules for securing automobiles, light trucks and vans?

Code of Federal Regulations, 2013 CFR

2013-10-01

... 49 Transportation 5 2013-10-01 2013-10-01 false What are the rules for securing automobiles, light... automobiles, light trucks and vans? (a) Applicability. The rules in this section apply to the transportation of automobiles, light trucks, and vans which individually weigh 4,536 kg. (10,000 lb) or less...

49 CFR 393.128 - What are the rules for securing automobiles, light trucks and vans?

Code of Federal Regulations, 2010 CFR

2010-10-01

... 49 Transportation 5 2010-10-01 2010-10-01 false What are the rules for securing automobiles, light... automobiles, light trucks and vans? (a) Applicability. The rules in this section apply to the transportation of automobiles, light trucks, and vans which individually weigh 4,536 kg. (10,000 lb) or less...

49 CFR 393.128 - What are the rules for securing automobiles, light trucks and vans?

Code of Federal Regulations, 2012 CFR

2012-10-01

... 49 Transportation 5 2012-10-01 2012-10-01 false What are the rules for securing automobiles, light... automobiles, light trucks and vans? (a) Applicability. The rules in this section apply to the transportation of automobiles, light trucks, and vans which individually weigh 4,536 kg. (10,000 lb) or less...

49 CFR 393.128 - What are the rules for securing automobiles, light trucks and vans?

Code of Federal Regulations, 2014 CFR

2014-10-01

... 49 Transportation 5 2014-10-01 2014-10-01 false What are the rules for securing automobiles, light... automobiles, light trucks and vans? (a) Applicability. The rules in this section apply to the transportation of automobiles, light trucks, and vans which individually weigh 4,536 kg. (10,000 lb) or less...

49 CFR 393.128 - What are the rules for securing automobiles, light trucks and vans?

Code of Federal Regulations, 2011 CFR

2011-10-01

... 49 Transportation 5 2011-10-01 2011-10-01 false What are the rules for securing automobiles, light... automobiles, light trucks and vans? (a) Applicability. The rules in this section apply to the transportation of automobiles, light trucks, and vans which individually weigh 4,536 kg. (10,000 lb) or less...

An exploratory study of long-haul truck drivers' secondary tasks and reasons for performing them.

PubMed

Iseland, Tobias; Johansson, Emma; Skoog, Siri; Dåderman, Anna M

2018-08-01

Research on drivers has shown how certain visual-manual secondary tasks, unrelated to driving, increase the risk of being involved in crashes. The purpose of the study was to investigate (1) if long-haul truck drivers in Sweden engage in secondary tasks while driving, what tasks are performed and how frequently, (2) the drivers' self-perceived reason/s for performing them, and (3) if psychological factors might reveal reasons for their engaging in secondary tasks. The study comprised 13 long-haul truck drivers and was conducted through observations, interviews, and questionnaires. The drivers performed secondary tasks, such as work environment related "necessities" (e.g., getting food and/or beverages from the refrigerator/bag, eating, drinking, removing a jacket, face rubbing, and adjusting the seat), interacting with a mobile phone/in-truck technology, and doing administrative tasks. The long-haul truck drivers feel bored and use secondary tasks as a coping strategy to alleviate boredom/drowsiness, and for social interaction. The higher number of performed secondary tasks could be explained by lower age, shorter driver experience, less openness to experience, lower honesty-humility, lower perceived stress, lower workload, and by higher health-related quality of life. These explanatory results may serve as a starting point for further studies on large samples to develop a safer and healthier environment for long-haul truck drivers. Copyright © 2018. Published by Elsevier Ltd.

Work schedules of long-distance truck drivers before and after 2004 hours-of-service rule change.

PubMed

McCartt, Anne T; Hellinga, Laurie A; Solomon, Mark G

2008-01-01

Federal rules regulate work hours of interstate commercial truck drivers. On January 4, 2004, a new work rule was implemented, increasing daily and weekly maximum driving limits and daily off-duty requirements. The present study assessed changes in long-distance truck drivers' reported work schedules and reported fatigued driving after the rule change. Associations between reported rule violations, fatigued driving, and schedule as well as other characteristics were examined. Samples of long-distance truck drivers were interviewed face-to-face in two states immediately before the rule change (November-December 2003) and about 1 year (November-December 2004) and 2 years (November-December 2005) after the change. Drivers reported substantially more hours of driving after the rule change. Most drivers reported regularly using a new restart provision, which permits a substantial increase in weekly driving. Reported daily off-duty and sleep time increased. Reported incidents of falling asleep at the wheel of the truck increased between 2003 (before the rule change) and 2004 and 2005 (after the change); in 2005 about one fifth of drivers reported falling asleep at the wheel in the past month. The frequency of reported rule violations under the old and new rules was similar. The percentage of trucks with electronic on-board recorders increased significantly to almost half the fleet; only a few drivers were using automated recorders to report rule compliance. More than half of drivers said that requiring automated recorders on all large trucks to enforce driving-hour limits would improve compliance with work rules. Based on the 2004-2005 survey data, drivers who reported more frequent rule violations were significantly more likely to report fatigued driving. Predictors of reported violations included having unrealistic delivery schedules, longer wait times to drop off or pick up loads, difficulty finding a legal place to stop or rest, and driving a refrigerated trailer

40 CFR 80.131 - Agreed upon procedures for GTAB, certain conventional gasoline imported by truck, previously...

Code of Federal Regulations, 2010 CFR

2010-07-01

..., certain conventional gasoline imported by truck, previously certified gasoline used to produce gasoline... Agreed upon procedures for GTAB, certain conventional gasoline imported by truck, previously certified gasoline used to produce gasoline, and butane blenders. (a) Attest procedures for GTAB. The following are...

40 CFR 80.131 - Agreed upon procedures for GTAB, certain conventional gasoline imported by truck, previously...

Code of Federal Regulations, 2011 CFR

2011-07-01

..., certain conventional gasoline imported by truck, previously certified gasoline used to produce gasoline... Agreed upon procedures for GTAB, certain conventional gasoline imported by truck, previously certified gasoline used to produce gasoline, and butane blenders. (a) Attest procedures for GTAB. The following are...

40 CFR 80.131 - Agreed upon procedures for GTAB, certain conventional gasoline imported by truck, previously...

Code of Federal Regulations, 2013 CFR

2013-07-01

..., certain conventional gasoline imported by truck, previously certified gasoline used to produce gasoline... Agreed upon procedures for GTAB, certain conventional gasoline imported by truck, previously certified gasoline used to produce gasoline, and butane blenders. (a) Attest procedures for GTAB. The following are...

40 CFR 80.131 - Agreed upon procedures for GTAB, certain conventional gasoline imported by truck, previously...

Code of Federal Regulations, 2012 CFR

2012-07-01

..., certain conventional gasoline imported by truck, previously certified gasoline used to produce gasoline... Agreed upon procedures for GTAB, certain conventional gasoline imported by truck, previously certified gasoline used to produce gasoline, and butane blenders. (a) Attest procedures for GTAB. The following are...

40 CFR 80.131 - Agreed upon procedures for GTAB, certain conventional gasoline imported by truck, previously...

Code of Federal Regulations, 2014 CFR

2014-07-01

..., certain conventional gasoline imported by truck, previously certified gasoline used to produce gasoline... Agreed upon procedures for GTAB, certain conventional gasoline imported by truck, previously certified gasoline used to produce gasoline, and butane blenders. (a) Attest procedures for GTAB. The following are...

Heavy truck data in Virginia : collection, uses, and needs.

DOT National Transportation Integrated Search

1988-01-01

This report describes the collection and uses of heavy truck data by Virginia agencies. Data categories include: (I) classification counts, (2) accidents; (3) off-tracking; (4) passenger car equivalents (PCE), (5) equivalent axle load (EAL), (6) spee...

Project U22 : Trusted Truck(R) II (phase D).

DOT National Transportation Integrated Search

2010-10-01

The Trusted Truck Independent Certification System is a wireless roadside inspection initiative that offers immediate and vital incentives to the vehicle operator to save the many hours spent waiting in line at state vehicle inspection stations, wh...

Role of sensory and cognitive conspicuity in the prevention of collisions between motorcycles and trucks at T-intersections.

PubMed

Law, Teik Hua; Ghanbari, Mahshid; Hamid, Hussain; Abdul-Halin, Alfian; Ng, Choy Peng

2016-11-01

Motorcyclists are particularly vulnerable to injury in crashes with heavy vehicles due to substantial differences in vehicle mass, the degree of protection and speed. There is a considerable difference in height between motorcycles and trucks; motorcycles are viewed by truck drivers from downward angles, and shorter distances between them mean steeper downward angles. Hence, we anticipated that the effects of motorcycle conspicuity treatments would be different for truck drivers. Therefore, this study aims to evaluate the effects of motorcycle conspicuity treatments on the identification and detection of motorcycles by truck drivers. Two complementary experiments were performed; the first experiment assessed the impact of motorcycle sensory conspicuity on the ability of un-alerted truck drivers to detect motorcycles, and the second experiment assessed the motorcycle cognitive conspicuity to alerted truck drivers. The sensory conspicuity was measured in terms of motorcycle detection rates by un-alerted truck drivers when they were not anticipating a motorcycle within a realistic driving scene, while the cognitive conspicuity was determined by the time taken by alerted truck drivers to actively search for a motorcycle. In the first experiment, the participants were presented with 10 pictures and were instructed to report the kinds of vehicles that were presented in the pictures. Each picture was shown to the participants for 600ms. In the second experiment, the participants were presented with the same set of pictures and were instructed to respond by clicking the right button on a mouse as soon as they detected a motorcycle in the picture. The results indicate that the motorcycle detection rate increases, and the response time to search for a motorcycle decreases, as the distance between the targeted motorcycle and the viewer decreases. This is true regardless of the type of conspicuity treatment used. The use of daytime running headlights (DRH) was found to

Estimating the supply and demand for commercial heavy truck parking on interstate highways : a case study of I-81 in Virginia.

DOT National Transportation Integrated Search

2002-01-01

The increasing number of trucks traveling on Virginia highways has led to a growing demand for public rest areas and private truck stops. This study developed a methodology to determine the supply and demand for commercial heavy truck parking using I...

Introduction to the 2017 SmartWay Truck Carrier Tool

EPA Pesticide Factsheets

This webinar provides an overview of EPA’s SmartWay program and the 2017 SmartWay Truck Carrier Tool, provides a live demonstration of the Tool, and explains how you can calculate and report your company’s emissions.

Pocket guide to large truck and bus statistics, 2015.

DOT National Transportation Integrated Search

2015-04-01

The Federal Motor Carrier Safety Administration compiled the data in this guide from multiple sources. The guide is divided into six sections and a glossary: (1) Overview: Large Trucks and Buses, (2) Roadside Inspections and Violations, (3) Reviews, ...

Pocket guide to large trucks and bus statistics, 2014.

DOT National Transportation Integrated Search

2014-10-01

The Federal Motor Carrier Safety Administration compiled the data in this guide from multiple sources. The guide is divided into six sections and a glossary: (1) Overview: Large Trucks and Buses, (2) Roadside Inspections and Violations, (3) Reviews, ...

Pedestrian and bicyclist fatalities in large truck crashes, 2013.

DOT National Transportation Integrated Search

2016-05-01

This report presents data on pedestrian and bicyclist fatalities in large truck crashes over the past several years (up to 2013). Information is provided on the characteristics of fatal crashes recorded in the National Highway Traffic Safety Administ...

Modeling truck speed in the upstream of one-lane two-way highway work zones : implications on reducing truck-related crashes in work zones.

DOT National Transportation Integrated Search

2011-07-01

Truck-related crashes constitute a major safety concern for government agencies, the construction industry, and the traveling public. Due to the rising needs in highway maintenance and construction, the number of work zones is increasing throughout t...

Application of Composite Materials to Truck Components: Leaf Springs and Propeller Shafts for 5-Ton Trucks

DTIC Science & Technology

1981-11-01

Fiberglass-Epoxy Resin Matrix Composites 2(L ABSTRACT (Caautlrue am reverse de bf IHI wee•a’y d Identify by block number) The objective of the program was to...Army truck are designed using resin matrix composite materials. Both design studies and prototype fabrication and testing are included in the program...For the leaf springs (both front and rear) a hybrid design using steel DD FOR 143 ED#T1ON OF I NOV65 IS OBSOLETE SECURITY CLASSIFICATION OF THIS PAGE

Terrorism and hazardous material trucking: promoting perceived collective efficacy for terrorism prevention.

PubMed

James, Keith

2008-01-01

Hazardous-material trucking has recently been identified as an area of high potential risk for terrorism. Some recent theory and case study papers have argued for the importance of collective efficacy to disaster-response, terrorism prevention, and other rare-but-risky events. Therefore, a study based on the collective efficacy literature was done to test an intervention for increasing perceived collective efficacy for terrorism prevention among Canadian hazardous-material truck drivers. Results supported the impact of the intervention in increasing perceived efficacy for terrorism prevention. Implications for theory, research, and application are discussed.

Diesel exhaust and lung cancer in the trucking industry: exposure-response analyses and risk assessment.

PubMed

Steenland, K; Deddens, J; Stayner, L

1998-09-01

Diesel exhaust is considered a probable human carcinogen by the International Agency for Research on Cancer (IARC). The epidemiologic evidence rests on studies of lung cancer among truck drivers, bus drivers, shipyard workers, and railroad workers. The general public is exposed to diesel exhaust in ambient air. Two regulatory agencies are now considering regulating levels of diesel exhaust: the California EPA (ambient levels) and the Mine Safety Health Administration (MSHA) (occupational levels). To date, there have been few quantitative exposure-response analyses of diesel and lung cancer based on human data. We conducted exposure-response analyses among workers in the trucking industry, adjusted for smoking. Diesel exhaust exposure was estimated based on a 1990 industrial hygiene survey. Past exposures were estimated assuming that they were a function of 1) the number of heavy duty trucks on the road, 2) the particulate emissions (grams/mile) of diesel engines over time, and 3) leaks from trucks' exhaust systems for long-haul drivers. Regardless of assumptions about past exposure, all analyses resulted in significant positive trends in lung cancer risk with increasing cumulative exposure. A male truck driver exposed to 5 micrograms/m3 of elemental carbon (a typical exposure in 1990, approximately five times urban background levels) would have a lifetime excess risk of lung cancer of 1-2% above a background risk of 5%. We found a lifetime excess risk ten times higher than the 1 per 1,000 excess risk allowed by OSHA in setting regulations. There are about 2.8 million truck drivers in the U.S. Our results depend on estimates about unknown past exposures, and should be viewed as exploratory. They conform reasonably well to recent estimates for diesel-exposed railroad workers done by the California EPA, although those results themselves have been disputed.

Assessment of truck driver distraction problem and research needs

DOT National Transportation Integrated Search

2005-05-01

The issue of driver distraction associated with the use of in-vehicle devices in heavy vehicles was explored through interviews with truck drivers and safety regulators. In order to characterize some of the interface designs and better understand the...

Structural Adequacy of Freight Car Truck Castings and Wheels

DOT National Transportation Integrated Search

1977-10-01

The structural adequacy of freight car truck castings and wheels to resist fatigue damage is reviewed. The environmental load data described in an earlier report under this program and additional load data which have only recently become available ar...

Social Cognitive Antecedents of Fruit and Vegetable Consumption in Truck Drivers: A Sequential Mediation Analysis.

PubMed

Hamilton, Kyra; Vayro, Caitlin; Schwarzer, Ralf

2015-01-01

To examine a mechanism by which social cognitive factors may predict fruit and vegetable consumption in long-haul truck drivers. Dietary self-efficacy, positive outcome expectancies, and intentions were assessed in 148 Australian truck drivers, and 1 week later they reported their fruit and vegetable consumption. A theory-guided sequential mediation model was specified that postulated self-efficacy and intention as mediators between outcome expectancies and behavior. The hypothesized model was confirmed. A direct effect of outcome expectancies was no longer present when mediators were included, and all indirect effects were significant, including the 2-mediator chain (β = .15; P < .05; 95% confidence interval, 0.05-0.32). Truck drivers who expected benefits from dietary change, felt confident about being capable to do so, and formed an intention were likely to report larger amounts of fruit and vegetable intake. The results suggest that the role of outcome expectancies and self-efficacy are important to consider for understanding and predicting healthy eating intentions in truck drivers. Copyright © 2015 Society for Nutrition Education and Behavior. Published by Elsevier Inc. All rights reserved.

Measurement of stress distributions in truck tyre contact patch in real rolling conditions

NASA Astrophysics Data System (ADS)

Anghelache, Gabriel; Moisescu, Raluca

2012-12-01

Stress distributions on three orthogonal directions have been measured across the contact patch of truck tyres using the complex measuring system that contains a transducer assembly with 30 sensing elements placed in the road surface. The measurements have been performed in straight line, in real rolling conditions. Software applications for calibration, data acquisition, and data processing were developed. The influence of changes in inflation pressure and rolling speed on the shapes and sizes of truck tyre contact patch has been shown. The shapes and magnitudes of normal, longitudinal, and lateral stress distributions, measured at low speed, have been presented and commented. The effect of wheel toe-in and camber on the stress distribution results was observed. The paper highlights the impact of the longitudinal tread ribs on the shear stress distributions. The ratios of stress distributions in the truck tyre contact patch have been computed and discussed.

Prevalence of drugs in oral fluid from truck drivers in Brazilian highways.

PubMed

Bombana, Henrique Silva; Gjerde, Hallvard; Dos Santos, Marcelo Filonzi; Jamt, Ragnhild Elén Gjulem; Yonamine, Mauricio; Rohlfs, Waldo José Caram; Muñoz, Daniel Romero; Leyton, Vilma

2017-04-01

Traffic accidents are responsible for 1.25 million deaths worldwide and are the most common cause of death among those aged 15-29 years. In Brazil, traffic accidents caused more than 44,000 deaths in 2014. The use of psychoactive drugs is an important risk factor for being involved in traffic accidents. Previous studies have found that psychoactive substances are commonly used by truck drivers in Brazil to maintain their extensive work schedule and stay awake while driving during nighttime hours. The state of Sao Paulo is one of the most important states regarding goods transportation. Important highways cross through Sao Paulo to other regions from Brazil and to other countries in Latin America. This study aims to determine the prevalence of illicit drug use by truck drivers in the state of Sao Paulo through toxicological analyses of oral fluid. Truck drivers were randomly stopped by police officers on federal roads during morning hours. Oral fluid samples were collected using the Quantisal™ device. In addition, a questionnaire concerning sociodemographic characteristics and health information was administered. Oral fluid samples were screened for amphetamine, cocaine, and tetrahydrocannabinol (Δ9-THC) by ELISA and the confirmation was performed using ultra performance liquid chromatography with tandem mass spectrometry detection (UPLC-MS/MS). Of the 764 drivers stopped, 762 agreed to participate. The participants were driving an average of 614km and 9.4h a day. Of the total samples, 5.2% (n=40) tested positive for drugs. Cocaine was the most frequently found drug (n=21), followed by amphetamine (n=16) and Δ9-THC (n=8). All drivers were men with an average age of 42.5 years. With these results we were able to verify that many truck drivers were still consuming psychoactive drugs while driving, and cocaine was the most prevalent one. This reinforces the need for preventive measures aimed at controlling the use of illicit drugs by truck drivers in Brazil

Finite element analysis of ROPS for mechanical driving dump truck cab

NASA Astrophysics Data System (ADS)

Wang, Yong; Xie, Heping; Fang, Yuanbin; Feng, Handui; Dong, Lei

2018-02-01

For roll-over protective structures (ROPS) in a mechanical driving dump truck cab, it simulates the lateral, vertical and longitudinal loads of ROPS. It obtains stress and deformation of the cab that occurs to roll. For the relative weak position of ROPS in the cab, the structure of the cab is improved and verified according to the ISO 3164: 1995. The results show that the established finite element model can effectively predict the deformation and stress distribution of ROPS, and optimize the weak structure of the cab, which has important guiding significance for structural design of the cab and ROPS optimization of the mechanical driving dump truck cab.

Illinois Occupational Skill Standards: Entry-Level Truck Driver.

ERIC Educational Resources Information Center

Illinois Occupational Skill Standards and Credentialing Council, Carbondale.

This document, which is intended to serve as a guide for workforce preparation program providers, details the Illinois Occupational Skill Standards for programs preparing students for employment as entry-level truck drivers. The document begins with a brief overview of the Illinois perspective on occupational skill standards and credentialing, the…

9 CFR 71.5 - Unsanitary railroad cars, trucks, boats, aircraft or other means of conveyance; interstate...

Code of Federal Regulations, 2010 CFR

2010-01-01

..., boats, aircraft or other means of conveyance; interstate movement restricted. 71.5 Section 71.5 Animals... cars, trucks, boats, aircraft or other means of conveyance; interstate movement restricted. No person who receives notice from an APHIS representative that a railroad car, truck, boat, aircraft or other...

9 CFR 71.5 - Unsanitary railroad cars, trucks, boats, aircraft or other means of conveyance; interstate...

Code of Federal Regulations, 2013 CFR

2013-01-01

..., boats, aircraft or other means of conveyance; interstate movement restricted. 71.5 Section 71.5 Animals... cars, trucks, boats, aircraft or other means of conveyance; interstate movement restricted. No person who receives notice from an APHIS representative that a railroad car, truck, boat, aircraft or other...

9 CFR 71.5 - Unsanitary railroad cars, trucks, boats, aircraft or other means of conveyance; interstate...

Code of Federal Regulations, 2012 CFR

2012-01-01

..., boats, aircraft or other means of conveyance; interstate movement restricted. 71.5 Section 71.5 Animals... cars, trucks, boats, aircraft or other means of conveyance; interstate movement restricted. No person who receives notice from an APHIS representative that a railroad car, truck, boat, aircraft or other...