Sample records for handling qualities criteria

  1. Development of Handling Qualities Criteria for Rotorcraft with Externally Slung Loads

    NASA Technical Reports Server (NTRS)

    Hoh, Roger H.; Heffley, Robert K.; Mitchell, David G.

    2006-01-01

    Piloted simulations were performed on the NASA-Ames Vertical Motion Simulator (VMS) to explore handling qualities issues for large cargo helicopters, particularly focusing on external slung load operations. The purpose of this work was based upon the need to include handling qualities criteria for cargo helicopters in an upgrade to the U.S. Army's rotorcraft handling qualities specification, Aeronautical Design Standard-33 (ADS-33E-PRF). From the VMS results, handling qualities criteria were developed fro cargo helicopters carrying external slung loads in the degraded visual environment (DVE). If satisfied, these criteria provide assurance that the handling quality rating (HQR) will be 4 or better for operations in the DVE, and with a load mass ratio of 0.33 or less. For lighter loads, flying qualities were found to be less dependent on the load geometry and therefore the significance of the criteria is less. For heavier loads, meeting the criteria ensures the best possible handling qualities, albeit Level 2 for load mass ratios greater than 0.33.

  2. Rotorcraft handling-qualities design criteria development

    NASA Technical Reports Server (NTRS)

    Aiken, Edwin W.; Lebacqz, J. Victor; Chen, Robert T. N.; Key, David L.

    1988-01-01

    Joint NASA/Army efforts at the Ames Research Center to develop rotorcraft handling-qualities design criteria began in earnest in 1975. Notable results were the UH-1H VSTOLAND variable stability helicopter, the VFA-2 camera-and-terrain-board simulator visual system, and the generic helicopter real-time mathematical model, ARMCOP. An initial series of handling-qualities studies was conducted to assess the effects of rotor design parameters, interaxis coupling, and various levels of stability and control augmentation. The ability to conduct in-flight handling-qualities research was enhanced by the development of the NASA/Army CH-47 variable-stability helicopter. Research programs conducted using this vehicle include vertical-response investigations, hover augmentation systems, and the effects of control-force characteristics. The handling-qualities data base was judged to be sufficient to allow an update of the military helicopter handling-qualities specification, MIL-H-8501. These efforts, including not only the in-house experimental work but also contracted research and collaborative programs performed under the auspices of various international agreements. The report concludes by reviewing the topics that are currently most in need of work, and the plans for addressing these topics.

  3. Development of longitudinal handling qualities criteria for large advanced supersonic aircraft

    NASA Technical Reports Server (NTRS)

    Sudderth, R. W.; Bohn, J. G.; Caniff, M. A.; Bennett, G. R.

    1975-01-01

    Longitudinal handling qualities criteria in terms of airplane response characteristics were developed. The criteria cover high speed cruise maneuvering, landing approach, and stall recovery. Data substantiating the study results are reported.

  4. Evaluation of High-Speed Civil Transport Handling Qualities Criteria with Supersonic Flight Data

    NASA Technical Reports Server (NTRS)

    Cox, Timothy H.; Jackson, Dante W.

    1997-01-01

    Most flying qualities criteria have been developed from data in the subsonic flight regime. Unique characteristics of supersonic flight raise questions about whether these criteria successfully extend into the supersonic flight regime. Approximately 25 years ago NASA Dryden Flight Research Center addressed this issue with handling qualities evaluations of the XB-70 and YF-12. Good correlations between some of the classical handling qualities parameters, such as the control anticipation parameter as a function of damping, were discovered. More criteria have been developed since these studies. Some of these more recent criteria are being used in designing the High-Speed Civil Transport (HSCT). A second research study recently addressed this issue through flying qualities evaluations of the SR-71 at Mach 3. The research goal was to extend the high-speed flying qualities experience of large airplanes and to evaluate more recent MIL-STD-1797 criteria against pilot comments and ratings. Emphasis was placed on evaluating the criteria used for designing the HSCT. XB-70 and YF-12 data from the previous research supplemented the SR-71 data. The results indicate that the criteria used in the HSCT design are conservative and should provide good flying qualities for typical high-speed maneuvering. Additional results show correlation between the ratings and comments and criteria for gradual maneuvering with precision control. Correlation is shown between ratings and comments and an extension of the Neal/Smith criterion using normal acceleration instead of pitch rate.

  5. Handling qualities criteria for the space shuttle orbiter during the terminal phase of flight

    NASA Technical Reports Server (NTRS)

    Stapleford, R. L.; Klein, R. H.; Hob, R. H.

    1972-01-01

    It was found that large portions of the military handling qualities specification are directly applicable. However a number of additional and substitute criteria are recommended for areas not covered or inadequately covered in the military specification. Supporting pilot/vehicle analyses and simulation experiments were conducted and are described. Results are also presented of analytical and simulator evaluations of three specific interim Orbiter designs which provided a test of the proposed handling qualities criteria. The correlations between the analytical and experimental evaluations were generally excellent.

  6. Application of frequency domain handling qualities criteria to the longitudinal landing task

    NASA Technical Reports Server (NTRS)

    Sarrafian, S. K.; Powers, B. G.

    1985-01-01

    Three frequency-domain handling qualities criteria have been applied to the observed data to correlate the actual pilot ratings assigned to generic transport configurations with stability augmentation during the longitudinal landing task. The criteria are based on closed-loop techniques using pitch attitude, altitude rate at the pilot station, and altitude at the pilot station as dominating control parameters during this task. It is found that most promising results are obtained with altitude control performed by closing an inner loop on pitch attitude and closing an outer loop on altitude.

  7. Helicopter Handling Qualities

    NASA Technical Reports Server (NTRS)

    1982-01-01

    Helicopters are used by the military and civilian communities for a variety of tasks and must be capable of operating in poor weather conditions and at night. Accompanying extended helicopter operations is a significant increase in pilot workload and a need for better handling qualities. An overview of the status and problems in the development and specification of helicopter handling-qualities criteria is presented. Topics for future research efforts by government and industry are highlighted.

  8. A design procedure and handling quality criteria for lateral directional flight control systems

    NASA Technical Reports Server (NTRS)

    Stein, G.; Henke, A. H.

    1972-01-01

    A practical design procedure for aircraft augmentation systems is described based on quadratic optimal control technology and handling-quality-oriented cost functionals. The procedure is applied to the design of a lateral-directional control system for the F4C aircraft. The design criteria, design procedure, and final control system are validated with a program of formal pilot evaluation experiments.

  9. Statistical survey of XB-70 airplane responses and control usage with an illustration of the application to handling qualities criteria

    NASA Technical Reports Server (NTRS)

    Powers, B. G.

    1972-01-01

    The magnitude and frequency of occurrence of aircraft responses and control inputs during 27 flights of the XB-70 airplane were measured. Exceedance curves are presented for the airplane responses and control usage. A technique is presented which makes use of these exceedance curves to establish or verify handling qualities criteria. This technique can provide a means of incorporating current operational experience in handling qualities requirements for future aircraft.

  10. Incorporating Handling Qualities Analysis into Rotorcraft Conceptual Design

    NASA Technical Reports Server (NTRS)

    Lawrence, Ben

    2014-01-01

    This paper describes the initial development of a framework to incorporate handling qualities analyses into a rotorcraft conceptual design process. In particular, the paper describes how rotorcraft conceptual design level data can be used to generate flight dynamics models for handling qualities analyses. Also, methods are described that couple a basic stability augmentation system to the rotorcraft flight dynamics model to extend analysis to beyond that of the bare airframe. A methodology for calculating the handling qualities characteristics of the flight dynamics models and for comparing the results to ADS-33E criteria is described. Preliminary results from the application of the handling qualities analysis for variations in key rotorcraft design parameters of main rotor radius, blade chord, hub stiffness and flap moment of inertia are shown. Varying relationships, with counteracting trends for different handling qualities criteria and different flight speeds are exhibited, with the action of the control system playing a complex part in the outcomes. Overall, the paper demonstrates how a broad array of technical issues across flight dynamics stability and control, simulation and modeling, control law design and handling qualities testing and evaluation had to be confronted to implement even a moderately comprehensive handling qualities analysis of relatively low fidelity models. A key outstanding issue is to how to 'close the loop' with an overall design process, and options for the exploration of how to feedback handling qualities results to a conceptual design process are proposed for future work.

  11. Application of frequency domain handling qualities criteria to the longitudinal landing task

    NASA Technical Reports Server (NTRS)

    Sarrafian, S. K.; Powers, B. G.

    1985-01-01

    Under NASA sponsorship, an in-flight simulation of the longitudinal handling qualities of several configurations for the approach and landing tasks was performed on the USAF/AFWAL Total In-Flight Simulator by the Calspan Corporation. The basic configuration was a generic transport airplane with static instability. The control laws included proportional plus integral gain loops to produce pitch-rate and angle-of-attack feedback loops. The evaluation task was a conventional visual approach to a flared touchdown at a designated spot on the runway with a lateral offset. The general conclusions were that the existing criteria are based on pitch-attitude response and that these characteristics do not adequately discriminate between the good and bad configurations of this study. This paper describes the work that has been done to further develop frequency-based criteria in an effort to provide better correlation with the observed data.

  12. Orion Entry Handling Qualities Assessments

    NASA Technical Reports Server (NTRS)

    Bihari, B.; Tiggers, M.; Strahan, A.; Gonzalez, R.; Sullivan, K.; Stephens, J. P.; Hart, J.; Law, H., III; Bilimoria, K.; Bailey, R.

    2011-01-01

    The Orion Command Module (CM) is a capsule designed to bring crew back from the International Space Station (ISS), the moon and beyond. The atmospheric entry portion of the flight is deigned to be flown in autopilot mode for nominal situations. However, there exists the possibility for the crew to take over manual control in off-nominal situations. In these instances, the spacecraft must meet specific handling qualities criteria. To address these criteria two separate assessments of the Orion CM s entry Handling Qualities (HQ) were conducted at NASA s Johnson Space Center (JSC) using the Cooper-Harper scale (Cooper & Harper, 1969). These assessments were conducted in the summers of 2008 and 2010 using the Advanced NASA Technology Architecture for Exploration Studies (ANTARES) six degree of freedom, high fidelity Guidance, Navigation, and Control (GN&C) simulation. This paper will address the specifics of the handling qualities criteria, the vehicle configuration, the scenarios flown, the simulation background and setup, crew interfaces and displays, piloting techniques, ratings and crew comments, pre- and post-fight briefings, lessons learned and changes made to improve the overall system performance. The data collection tools, methods, data reduction and output reports will also be discussed. The objective of the 2008 entry HQ assessment was to evaluate the handling qualities of the CM during a lunar skip return. A lunar skip entry case was selected because it was considered the most demanding of all bank control scenarios. Even though skip entry is not planned to be flown manually, it was hypothesized that if a pilot could fly the harder skip entry case, then they could also fly a simpler loads managed or ballistic (constant bank rate command) entry scenario. In addition, with the evaluation set-up of multiple tasks within the entry case, handling qualities ratings collected in the evaluation could be used to assess other scenarios such as the constant bank angle

  13. Analysis of Handling Qualities Design Criteria for Active Inceptor Force-Feel Characteristics

    NASA Technical Reports Server (NTRS)

    Malpica, Carlos A.; Lusardi, Jeff A.

    2013-01-01

    ratio. While these two studies produced boundaries for acceptable/unacceptable stick dynamics for rotorcraft, they were not able to provide guidance on how variations of the stick dynamics in the acceptable region impact handling qualities. More recently, a ground based simulation study [5] suggested little benefit was to be obtained from variations of the damping ratio for a side-stick controller exhibiting high natural frequencies (greater than 17 rad/s) and damping ratios (greater than 2.0). A flight test campaign was conducted concurrently on the RASCAL JUH-60A in-flight simulator and the ACT/FHS EC-135 in flight simulator [6]. Upon detailed analysis of the pilot evaluations the study identified a clear preference for a high damping ratio and natural frequency of the center stick inceptors. Side stick controllers were found to be less sensitive to the damping. While these studies have compiled a substantial amount of data, in the form of qualitative and quantitative pilot opinion, a fundamental analysis of the effect of the inceptor force-feel system on flight control is found to be lacking. The study of Ref. [6] specifically concluded that a systematic analysis was necessary, since discrepancies with the assigned handling qualities showed that proposed analytical design metrics, or criteria, were not suitable. The overall goal of the present study is to develop a clearer fundamental understanding of the underlying mechanisms associated with the inceptor dynamics that govern the handling qualities using a manageable analytical methodology.

  14. A Look at Handling Qualities of Canard Configurations

    NASA Technical Reports Server (NTRS)

    Anderson, Seth B.

    1986-01-01

    The first human-powered flight was achieved by a canard-configured aircraft (Wright Brothers). Although other canard concepts were flown with varying degrees of success over the years, the tail-aft configuration has dominated the aircraft market for both military and civil use. Reviewed are the development of several canard aircraft with emphasis on stability and control, handling qualities, and operating problems. The results show that early canard concepts suffered adversely in flight behavior because of a lack of understanding of the sensitivities of these concepts to basic stability and control principles. Modern canard designs have been made competitive with tail-aft configurations by using appropriate handling qualities design criteria.

  15. High-Alpha Handling Qualities Flight Research on the NASA F/A-18 High Alpha Research Vehicle

    NASA Technical Reports Server (NTRS)

    Wichman, Keith D.; Pahle, Joseph W.; Bahm, Catherine; Davidson, John B.; Bacon, Barton J.; Murphy, Patrick C.; Ostroff, Aaron J.; Hoffler, Keith D.

    1996-01-01

    A flight research study of high-angle-of-attack handling qualities has been conducted at the NASA Dryden Flight Research Center using the F/A-18 High Alpha Research Vehicle (HARV). The objectives were to create a high-angle-of-attack handling qualities flight database, develop appropriate research evaluation maneuvers, and evaluate high-angle-of-attack handling qualities guidelines and criteria. Using linear and nonlinear simulations and flight research data, the predictions from each criterion were compared with the pilot ratings and comments. Proposed high-angle-of-attack nonlinear design guidelines and proposed handling qualities criteria and guidelines developed using piloted simulation were considered. Recently formulated time-domain Neal-Smith guidelines were also considered for application to high-angle-of-attack maneuvering. Conventional envelope criteria were evaluated for possible extension to the high-angle-of-attack regime. Additionally, the maneuvers were studied as potential evaluation techniques, including a limited validation of the proposed standard evaluation maneuver set. This paper gives an overview of these research objectives through examples and summarizes result highlights. The maneuver development is described briefly, the criteria evaluation is emphasized with example results given, and a brief discussion of the database form and content is presented.

  16. Sediment quality criteria: A review with recommendations for developing criteria for the Hanford Site

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Driver, C.J.

    1994-05-01

    Criteria for determining the quality of liver sediment are necessary to ensure that concentrations of contaminants in aquatic systems are within acceptable limits for the protection of aquatic and human life. Such criteria should facilitate decision-making about remediation, handling, and disposal of contaminants. Several approaches to the development of sediment quality criteria (SQC) have been described and include both descriptive and numerical methods. However, no single method measures all impacts at all times to all organisms (U.S. EPA 1992b). The U.S. EPA`s interest is primarily in establishing chemically based, numerical SQC that are applicable nation-wide (Shea 1988). Of the approachesmore » proposed for SQC development, only three are being considered for numerical SQC on a national level. These approaches include an Equilibrium Partitioning Approach, a site-specific method using bioassays (the Apparent Effects Threshold Approach), and an approach similar to EPA`s water quality criteria (Pavlou and Weston 1984). Although national (or even regional) criteria address a number of political, litigative, and engineering needs, some researchers feel that protection of benthic communities require site-specific, biologically based criteria (Baudo et al. 1990). This is particularly true for areas where complex mixtures of contaminants are present in sediments. Other scientifically valid and accepted procedures for freshwater SQC include a background concentration approach, methods using field or spiked bioassays, a screening level concentration approach, the Apparent Effects Threshold Approach, the Sediment Quality Triad, the International Joint Commission Sediment Assessment Strategy, and the National Status and Trends Program Approach. The various sediment assessment approaches are evaluated for application to the Hanford Reach and recommendations for Hanford Site sediment quality criteria are discussed.« less

  17. Handling Qualities Optimization for Rotorcraft Conceptual Design

    NASA Technical Reports Server (NTRS)

    Lawrence, Ben; Theodore, Colin R.; Berger, Tom

    2016-01-01

    Over the past decade, NASA, under a succession of rotary-wing programs has been moving towards coupling multiple discipline analyses in a rigorous consistent manner to evaluate rotorcraft conceptual designs. Handling qualities is one of the component analyses to be included in a future NASA Multidisciplinary Analysis and Optimization framework for conceptual design of VTOL aircraft. Similarly, the future vision for the capability of the Concept Design and Assessment Technology Area (CD&A-TA) of the U.S Army Aviation Development Directorate also includes a handling qualities component. SIMPLI-FLYD is a tool jointly developed by NASA and the U.S. Army to perform modeling and analysis for the assessment of flight dynamics and control aspects of the handling qualities of rotorcraft conceptual designs. An exploration of handling qualities analysis has been carried out using SIMPLI-FLYD in illustrative scenarios of a tiltrotor in forward flight and single-main rotor helicopter at hover. Using SIMPLI-FLYD and the conceptual design tool NDARC integrated into a single process, the effects of variations of design parameters such as tail or rotor size were evaluated in the form of margins to fixed- and rotary-wing handling qualities metrics as well as the vehicle empty weight. The handling qualities design margins are shown to vary across the flight envelope due to both changing flight dynamic and control characteristics and changing handling qualities specification requirements. The current SIMPLI-FLYD capability and future developments are discussed in the context of an overall rotorcraft conceptual design process.

  18. The influence of handling qualities on safety and survivability

    NASA Technical Reports Server (NTRS)

    Anderson, S. B.

    1977-01-01

    The relationship of handling qualities to safety and survivability of military aircraft is examined which includes the following: (1) a brief discussion of the philosophy used in the military specifications for treatment of degraded handling qualities, (2) an examination of several example handling qualities problem areas which influence safety and survivability; and (3) a movie illustrating the potential dangers of inadequate handling qualities features.

  19. In Flight Evaluation of Active Inceptor Force-Feel Characteristics and Handling Qualities

    NASA Technical Reports Server (NTRS)

    Lusardi, Jeff A.; Blanken, Chris L.; Ott, Carl Raymond; Malpica, Carlos A.; von Gruenhagen, Wolfgang

    2012-01-01

    The effect of inceptor feel-system characteristics on piloted handling qualities has been a research topic of interest for many years. Most of the research efforts have focused on advanced fly-by-wire fixed-wing aircraft with only a few studies investigating the effects on rotorcraft. Consequently, only limited guidance is available on how cyclic force-feel characteristics should be set to obtain optimal handling qualities for rotorcraft. To study this effect, the U.S. Army Aeroflightdynamics Directorate working with the DLR Institute of Flight Systems in Germany under Task X of the U.S. German Memorandum of Understanding have been conducting flight test evaluations. In the U.S., five experimental test pilots have completed evaluations of two Mission Task Elements (MTEs) from ADS-33E-PRF and two command/response types for a matrix of center-stick cyclic force-feel characteristics at Moffett Field. In Germany, three experimental test Pilots have conducted initial evaluations of the two MTEs with two command/response types for a parallel matrix of side-stick cyclic force-feel characteristics at WTD-61 in Manching. The resulting data set is used to correlate the effect of changes in natural frequency and damping ratio of the cyclic inceptor on the piloted handling qualities. Existing criteria in ADS-33E and a proposed Handling Qualities Sensitivity Function that includes the effects of the cyclic force-feel characteristics are also evaluated against the data set and discussed.

  20. Handling Qualities Implications for Crewed Spacecraft Operations

    NASA Technical Reports Server (NTRS)

    Bailey, Randall E.; Jackson, E. Bruce; Arthur, J. J.

    2012-01-01

    Abstract Handling qualities embody those qualities or characteristics of an aircraft that govern the ease and precision with which a pilot is able to perform the tasks required in support of an aircraft role. These same qualities are as critical, if not more so, in the operation of spacecraft. A research, development, test, and evaluation process was put into effect to identify, understand, and interpret the engineering and human factors principles which govern the pilot-vehicle dynamic system as they pertain to space exploration missions and tasks. Toward this objective, piloted simulations were conducted at the NASA Langley Research Center and Ames Research Center for earth-orbit proximity operations and docking and lunar landing. These works provide broad guidelines for the design of spacecraft to exhibit excellent handling characteristics. In particular, this work demonstrates how handling qualities include much more than just stability and control characteristics of a spacecraft or aircraft. Handling qualities are affected by all aspects of the pilot-vehicle dynamic system, including the motion, visual and aural cues of the vehicle response as the pilot performs the required operation or task. A holistic approach to spacecraft design, including the use of manual control, automatic control, and pilot intervention/supervision is described. The handling qualities implications of design decisions are demonstrated using these pilot-in-the-loop evaluations of docking operations and lunar landings.

  1. Cooper-Harper Experience Report for Spacecraft Handling Qualities Applications

    NASA Technical Reports Server (NTRS)

    Bailey, Randall E.; Jackson, E. Bruce; Bilimoria, Karl D.; Mueller, Eric R.; Frost, Chad R.; Alderete, Thomas S.

    2009-01-01

    A synopsis of experience from the fixed-wing and rotary-wing aircraft communities in handling qualities development and the use of the Cooper-Harper pilot rating scale is presented as background for spacecraft handling qualities research, development, test, and evaluation (RDT&E). In addition, handling qualities experiences and lessons-learned from previous United States (US) spacecraft developments are reviewed. This report is intended to provide a central location for references, best practices, and lessons-learned to guide current and future spacecraft handling qualities RDT&E.

  2. Handling qualities effects of display latency

    NASA Technical Reports Server (NTRS)

    King, David W.

    1993-01-01

    Display latency is the time delay between aircraft response and the corresponding response of the cockpit displays. Currently, there is no explicit specification for allowable display lags to ensure acceptable aircraft handling qualities in instrument flight conditions. This paper examines the handling qualities effects of display latency between 70 and 400 milliseconds for precision instrument flight tasks of the V-22 Tiltrotor aircraft. Display delay effects on the pilot control loop are analytically predicted through a second order pilot crossover model of the V-22 lateral axis, and handling qualities trends are evaluated through a series of fixed-base piloted simulation tests. The results show that the effects of display latency for flight path tracking tasks are driven by the stability characteristics of the attitude control loop. The data indicate that the loss of control damping due to latency can be simply predicted from knowledge of the aircraft's stability margins, control system lags, and required control bandwidths. Based on the relationship between attitude control damping and handling qualities ratings, latency design guidelines are presented. In addition, this paper presents a design philosophy, supported by simulation data, for using flight director display augmentation to suppress the effects of display latency for delays up to 300 milliseconds.

  3. Orion Handling Qualities During ISS Proximity Operations and Docking

    NASA Technical Reports Server (NTRS)

    Stephens, John-Paul; Vos, Gordon A.; Bilimoria, Karl D.; Mueller, Eric R.; Brazzel, Jack; Spehar, Pete

    2011-01-01

    NASA's Orion spacecraft is designed to autonomously rendezvous and dock with many vehicles including the International Space Station. However, the crew is able to assume manual control of the vehicle s attitude and flight path. In these instances, Orion must meet handling qualities requirements established by NASA. Two handling qualities assessments were conducted at the Johnson Space Center to evaluate preliminary designs of the vehicle using a six degree of freedom, high-fidelity guidance, navigation, and control simulation. The first assessed Orion s handling qualities during the last 20 ft before docking, and included both steady and oscillatory motions of the docking target. The second focused on manual acquisition of the docking axis during the proximity operations phase and subsequent station-keeping. Cooper-Harper handling qualities ratings, workload ratings and comments were provided by 10 evaluation pilots for the docking study and 5 evaluation pilots for the proximity operations study. For the docking task, both cases received 90% Level 1 (satisfactory) handling qualities ratings, exceeding NASA s requirement. All ratings for the ProxOps task were Level 1. These evaluations indicate that Orion is on course to meet NASA's handling quality requirements for ProxOps and docking.

  4. National Recommended Water Quality Criteria

    EPA Pesticide Factsheets

    The National Recommended Water Quality Criteria is a compilation of national recommended water quality criteria for the protection of aquatic life and human health in surface water for approximately 150 pollutants. These criteria provide guidance for states and tribes to use in adopting water quality standards.

  5. Aircraft Handling Qualities Data

    DTIC Science & Technology

    1972-12-01

    WITH YOUR INQUIRY 02672-931227121247 DEPT OF DEFENSE DEFENSE TECHNICAL INFORMATION CENTER ATTN: DTIC-OCP/JOYCE CHIRAS CAMERON STATION BLDG 9...Handling Qualities, F-IO4A, Lockheed Rept. t No. LR 10794, 12 Dec. 19ř Andrews, William H., and Herman A. Rediess, Flight-Determined Eta- bility and

  6. Proposed space shuttle cargo handling criteria at the operational site (preliminary)

    NASA Technical Reports Server (NTRS)

    Beck, P. E.

    1972-01-01

    The criteria for cargo handling at the operational site of space shuttles are presented, based on assumed program requirements. The concepts for the following functions are described: maintenance and checkout facility, transfer to launch pad, and launch pad. The requirements for the ground equipment are given along with the general sequences for cargo loading.

  7. Ride quality sensitivity to SAS control law and to handling quality variations

    NASA Technical Reports Server (NTRS)

    Roberts, P. A.; Schmidt, D. K.; Swaim, R. L.

    1976-01-01

    The RQ trends which large flexible aircraft exhibit under various parameterizations of control laws and handling qualities are discussed. A summary of the assumptions and solution technique, a control law parameterization review, a discussion of ride sensitivity to handling qualities, and the RQ effects generated by implementing relaxed static stability configurations are included.

  8. WATER QUALITY CRITERIA DOCUMENTS

    EPA Science Inventory

    Background

    Water quality standards and criteria are the foundation for a wide range of programs under the Clean Water Act. Specifically, under section 304(a)(1) of the Clean Water Act it requires EPA to develop criteria for water quality that accurately re...

  9. Water Quality Criteria

    EPA Pesticide Factsheets

    EPA develops water quality criteria based on the latest scientific knowledge to protect human health and aquatic life. This information serves as guidance to states and tribes in adopting water quality standards.

  10. Analysis of aircraft longitudinal handling qualities

    NASA Technical Reports Server (NTRS)

    Hess, R. A.

    1981-01-01

    The optimal control model (OCM) of the human pilot is applied to the study of aircraft handling qualities. Attention is focused primarily on longitudinal tasks. The modeling technique differs from previous applications of the OCM in that considerable effort is expended in simplifying the pilot/vehicle analysis. After briefly reviewing the OCM, a technique for modeling the pilot controlling higher order systems is introduced. Following this, a simple criterion for determining the susceptibility of an aircraft to pilot induced oscillations (PIO) is formulated. Finally, a model-based metric for pilot rating prediction is discussed. The resulting modeling procedure provides a relatively simple, yet unified approach to the study of a variety of handling qualities problems.

  11. An Investigation of Large Aircraft Handling Qualities

    NASA Astrophysics Data System (ADS)

    Joyce, Richard D.

    An analytical technique for investigating transport aircraft handling qualities is exercised in a study using models of two such vehicles, a Boeing 747 and Lockheed C-5A. Two flight conditions are employed for climb and directional tasks, and a third included for a flare task. The analysis technique is based upon a "structural model" of the human pilot developed by Hess. The associated analysis procedure has been discussed previously in the literature, but centered almost exclusively on the characteristics of high-performance fighter aircraft. The handling qualities rating level (HQRL) and pilot induced oscillation tendencies rating level (PIORL) are predicted for nominal configurations of the aircraft and for "damaged" configurations where actuator rate limits are introduced as nonlinearites. It is demonstrated that the analysis can accommodate nonlinear pilot/vehicle behavior and do so in the context of specific flight tasks, yielding estimates of handling qualities, pilot-induced oscillation tendencies and upper limits of task performance. A brief human-in-the-loop tracking study was performed to provide a limited validation of the pilot model employed.

  12. Analysis of Aircraft Control Performance using a Fuzzy Rule Base Representation of the Cooper-Harper Aircraft Handling Quality Rating

    NASA Technical Reports Server (NTRS)

    Tseng, Chris; Gupta, Pramod; Schumann, Johann

    2006-01-01

    The Cooper-Harper rating of Aircraft Handling Qualities has been adopted as a standard for measuring the performance of aircraft since it was introduced in 1966. Aircraft performance, ability to control the aircraft, and the degree of pilot compensation needed are three major key factors used in deciding the aircraft handling qualities in the Cooper- Harper rating. We formulate the Cooper-Harper rating scheme as a fuzzy rule-based system and use it to analyze the effectiveness of the aircraft controller. The automatic estimate of the system-level handling quality provides valuable up-to-date information for diagnostics and vehicle health management. Analyzing the performance of a controller requires a set of concise design requirements and performance criteria. Ir, the case of control systems fm a piloted aircraft, generally applicable quantitative design criteria are difficult to obtain. The reason for this is that the ultimate evaluation of a human-operated control system is necessarily subjective and, with aircraft, the pilot evaluates the aircraft in different ways depending on the type of the aircraft and the phase of flight. In most aerospace applications (e.g., for flight control systems), performance assessment is carried out in terms of handling qualities. Handling qualities may be defined as those dynamic and static properties of a vehicle that permit the pilot to fully exploit its performance in a variety of missions and roles. Traditionally, handling quality is measured using the Cooper-Harper rating and done subjectively by the human pilot. In this work, we have formulated the rules of the Cooper-Harper rating scheme as fuzzy rules with performance, control, and compensation as the antecedents, and pilot rating as the consequent. Appropriate direct measurements on the controller are related to the fuzzy Cooper-Harper rating system: a stability measurement like the rate of change of the cost function can be used as an indicator if the aircraft is under

  13. 33 CFR 154.1325 - Response plan development and evaluation criteria for facilities that handle, store, or transport...

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... evaluation criteria for facilities that handle, store, or transport other non-petroleum oils. 154.1325...) POLLUTION FACILITIES TRANSFERRING OIL OR HAZARDOUS MATERIAL IN BULK Response Plans for Other Non-Petroleum..., store, or transport other non-petroleum oils. (a) An owner or operator of a facility that handles...

  14. 33 CFR 154.1325 - Response plan development and evaluation criteria for facilities that handle, store, or transport...

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... evaluation criteria for facilities that handle, store, or transport other non-petroleum oils. 154.1325...) POLLUTION FACILITIES TRANSFERRING OIL OR HAZARDOUS MATERIAL IN BULK Response Plans for Other Non-Petroleum..., store, or transport other non-petroleum oils. (a) An owner or operator of a facility that handles...

  15. Orion Capsule Handling Qualities for Atmospheric Entry

    NASA Technical Reports Server (NTRS)

    Tigges, Michael A.; Bihari, Brian D.; Stephens, John-Paul; Vos, Gordon A.; Bilimoria, Karl D.; Mueller, Eric R.; Law, Howard G.; Johnson, Wyatt; Bailey, Randall E.; Jackson, Bruce

    2011-01-01

    Two piloted simulations were conducted at NASA's Johnson Space Center using the Cooper-Harper scale to study the handling qualities of the Orion Command Module capsule during atmospheric entry flight. The simulations were conducted using high fidelity 6-DOF simulators for Lunar Return Skip Entry and International Space Station Return Direct Entry flight using bank angle steering commands generated by either the Primary (PredGuid) or Backup (PLM) guidance algorithms. For both evaluations, manual control of bank angle began after descending through Entry Interface into the atmosphere until drogue chutes deployment. Pilots were able to use defined bank management and reversal criteria to accurately track the bank angle commands, and stay within flight performance metrics of landing accuracy, g-loads, and propellant consumption, suggesting that the pilotability of Orion under manual control is both achievable and provides adequate trajectory performance with acceptable levels of pilot effort. Another significant result of these analyses is the applicability of flying a complex entry task under high speed entry flight conditions relevant to the next generation Multi Purpose Crew Vehicle return from Mars and Near Earth Objects.

  16. A simulation investigation of the effects of engine-and thrust-response characteristics on helicopter handling qualities

    NASA Technical Reports Server (NTRS)

    Corless, L. D.; Blanken, C. L.

    1983-01-01

    A multi-phase program is being conducted to study, in a generic sense and through ground simulation, the effects of engine response, rotor inertia, rpm control, excess power, and vertical damping on specific maneuvers included in nap-of-the-Earth (NOE) operations. The helicopter configuration with an rpm-governed gas-turbine engine are considered. Handling-qualities-criteria data are considered in light of aspects peculiar to rotary-wing and NOE operations. The results of three moving-based piloted simulation studies are summarized and the frequency, characteristics of the helicopter thrust response which set it apart from other VTOL types are explained. Power-system response is affected by both the engine-governor response and the level of rotor inertia. However, results indicate that with unlimited power, variations in engine response can have a significant effect on pilot rating, whereas changes in rotor inertia, in general, do not. The results also show that any pilot interaction required to maintain proper control can significantly degrade handling qualities. Data for variations in vertical damping and collective sensitivity are compared with existing handling-qualities specifications, MIL-F-83300 and AGARD 577, and show a need for higher minimums for both damping and sensitivity for the bob-up task. Results for cases of limited power are also shown.

  17. Flight simulator for hypersonic vehicle and a study of NASP handling qualities

    NASA Technical Reports Server (NTRS)

    Ntuen, Celestine A.; Park, Eui H.; Deeb, Joseph M.; Kim, Jung H.

    1992-01-01

    The research goal of the Human-Machine Systems Engineering Group was to study the existing handling quality studies in aircraft with sonic to supersonic speeds and power in order to understand information requirements needed for a hypersonic vehicle flight simulator. This goal falls within the NASA task statements: (1) develop flight simulator for hypersonic vehicle; (2) study NASP handling qualities; and (3) study effects of flexibility on handling qualities and on control system performance. Following the above statement of work, the group has developed three research strategies. These are: (1) to study existing handling quality studies and the associated aircraft and develop flight simulation data characterization; (2) to develop a profile for flight simulation data acquisition based on objective statement no. 1 above; and (3) to develop a simulator and an embedded expert system platform which can be used in handling quality experiments for hypersonic aircraft/flight simulation training.

  18. 33 CFR 154.1047 - Response plan development and evaluation criteria for facilities that handle, store, or transport...

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... evaluation criteria for facilities that handle, store, or transport Group V petroleum oils. 154.1047 Section... Group V petroleum oils. (a) An owner or operator of a facility that handles, stores, or transports Group...) Procedures and strategies for responding to a worst case discharge of Group V petroleum oils to the maximum...

  19. 33 CFR 154.1047 - Response plan development and evaluation criteria for facilities that handle, store, or transport...

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... evaluation criteria for facilities that handle, store, or transport Group V petroleum oils. 154.1047 Section... Group V petroleum oils. (a) An owner or operator of a facility that handles, stores, or transports Group...) Procedures and strategies for responding to a worst case discharge of Group V petroleum oils to the maximum...

  20. 33 CFR 154.1047 - Response plan development and evaluation criteria for facilities that handle, store, or transport...

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... evaluation criteria for facilities that handle, store, or transport Group V petroleum oils. 154.1047 Section... Group V petroleum oils. (a) An owner or operator of a facility that handles, stores, or transports Group...) Procedures and strategies for responding to a worst case discharge of Group V petroleum oils to the maximum...

  1. 33 CFR 154.1047 - Response plan development and evaluation criteria for facilities that handle, store, or transport...

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... evaluation criteria for facilities that handle, store, or transport Group V petroleum oils. 154.1047 Section... Group V petroleum oils. (a) An owner or operator of a facility that handles, stores, or transports Group...) Procedures and strategies for responding to a worst case discharge of Group V petroleum oils to the maximum...

  2. 33 CFR 154.1047 - Response plan development and evaluation criteria for facilities that handle, store, or transport...

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... evaluation criteria for facilities that handle, store, or transport Group V petroleum oils. 154.1047 Section... Group V petroleum oils. (a) An owner or operator of a facility that handles, stores, or transports Group...) Procedures and strategies for responding to a worst case discharge of Group V petroleum oils to the maximum...

  3. Effects of simulated turbulence on aircraft handling qualities

    NASA Technical Reports Server (NTRS)

    Jacobson, I. D.; Joshi, D. S.

    1977-01-01

    The influence of simulated turbulence on aircraft handling qualities is presented. Pilot opinions of the handling qualities of a light general aviation aircraft were evaluated in a motion-base simulator using a simulated turbulence environment. A realistic representation of turbulence disturbances is described in terms of rms intensity and scale length and their random variations with time. The time histories generated by the proposed turbulence models showed characteristics which are more similar to real turbulence than the frequently-used Gaussian turbulence model. The proposed turbulence models flexibly accommodate changes in atmospheric conditions and are easily implemented in flight simulator studies.

  4. Effects of side-stick controllers on rotorcraft handling qualities for terrain flight

    NASA Technical Reports Server (NTRS)

    Aiken, E. W.

    1985-01-01

    Pertinent fixed and rotary-wing feasibility studies and handling-qualities research programs are reviewed and the effects of certain controller characteristics on handling qualities for specific rotorcraft flight tasks are summarized. The effects of the controller force-deflection relationship and the number of controlled axes that are integrated in a single controller are examined. Simulation studies were conducted which provide a significant part of the available handling qualities data. The studies demonstrate the feasibility of using a single, properly designed, limited-displacement, multiaxis controller for certain relatively routine flight tasks in a two-crew rotorcraft with nominal levels of stability and control augmentation with a high degree of reliability are incorporated, separated three or two-axis controller configurations are required for acceptable handling qualities.

  5. DEVELOPMENT OF MARINE WATER QUALITY CRITERIA

    EPA Science Inventory

    The U.S. Environmental Protectional Agency has developed guidelines for deriving numerical national water quality criteria for the protection of aquatic organisms and their uses. These guidelines provide the method for deriving water quality criteria, including minimum data base...

  6. Flying-qualities criteria for wings-level-turn maneuvering during an air-to-ground weapon delivery task

    NASA Technical Reports Server (NTRS)

    Sammonds, R. I.; Bunnell, J. W.

    1981-01-01

    A moving base simulator experiment demonstrated that a wings-level-turn control mode improved flying qualities for air to ground weapon delivery compared with those of a conventionally controlled aircraft. Evaluations of criteria for dynamic response for this system have shown that pilot ratings correlate well on the basis of equivalent time constant of the initial response. Ranges of this time constant, as well as digital system transport delays and lateral acceleration control authorities that encompassed level 1 through 3 handling qualities, were determined.

  7. Quality of life and handling experience with the PROSE device: an Indian scenario.

    PubMed

    Bhattacharya, Pradipta; Mahadevan, Rajeswari

    2017-11-01

    PROSE (prosthetic replacement of ocular surface ecosystem) device is a custom-designed, corneal vaulting scleral contact lens, which is used in the treatment of irregular corneal conditions to improve vision and comfort. The present study aimed at assessing the success of the PROSE device in an Indian scenario in terms of change in quality of life and to understand the handling issues related to the device use. Thirty-two subjects with various irregular corneal conditions meeting the inclusion criteria were included in the study. Subjects were followed for three months after dispensing the PROSE device. Subjects' demographic details, high and low contrast visual acuity with habitual correction and PROSE device, Visual Function Questionnaire scores (NEI VFQ-25) and Ocular Surface Disease Index (OSDI) scores pre- and post-PROSE treatment were collected and compared. An indigenously developed questionnaire was also administered during the follow-up visit for assessing the handling-related issues faced by the subjects while using the device. Forty eyes of 32 subjects were included in the study, of whom 30 reported for follow-up. The median NEI VFQ-25 score improved from 47.33 points to 77.27 points over a period of three months, which was statistically significant (p < 0.05). There was a statistically significant decrease in median OSDI score from 51.14 points to 13.63 points post-PROSE treatment (p < 0.05). Subjects reported no or very minimal handling-related difficulties associated with the use of the PROSE device. The PROSE treatment can be an effective mode of managing patients with irregular corneal conditions and significantly improved the vision-related quality of life of patients suffering from these conditions. The handling of the device is easy and can be mastered with adequate training. © 2017 Optometry Australia.

  8. A pilot modeling technique for handling-qualities research

    NASA Technical Reports Server (NTRS)

    Hess, R. A.

    1980-01-01

    A brief survey of the more dominant analysis techniques used in closed-loop handling-qualities research is presented. These techniques are shown to rely on so-called classical and modern analytical models of the human pilot which have their foundation in the analysis and design principles of feedback control. The optimal control model of the human pilot is discussed in some detail and a novel approach to the a priori selection of pertinent model parameters is discussed. Frequency domain and tracking performance data from 10 pilot-in-the-loop simulation experiments involving 3 different tasks are used to demonstrate the parameter selection technique. Finally, the utility of this modeling approach in handling-qualities research is discussed.

  9. 40 CFR 227.31 - Applicable marine water quality criteria.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 40 Protection of Environment 25 2011-07-01 2011-07-01 false Applicable marine water quality... § 227.31 Applicable marine water quality criteria. Applicable marine water quality criteria means the criteria given for marine waters in the EPA publication “Quality Criteria for Water” as published in 1976...

  10. 40 CFR 227.31 - Applicable marine water quality criteria.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... 40 Protection of Environment 25 2014-07-01 2014-07-01 false Applicable marine water quality... § 227.31 Applicable marine water quality criteria. Applicable marine water quality criteria means the criteria given for marine waters in the EPA publication “Quality Criteria for Water” as published in 1976...

  11. 40 CFR 227.31 - Applicable marine water quality criteria.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... 40 Protection of Environment 26 2012-07-01 2011-07-01 true Applicable marine water quality... § 227.31 Applicable marine water quality criteria. Applicable marine water quality criteria means the criteria given for marine waters in the EPA publication “Quality Criteria for Water” as published in 1976...

  12. Flying-qualities criteria for wings-level-turn maneuvering during an air-to-ground weapon delivery task

    NASA Technical Reports Server (NTRS)

    Sammonds, R. I.; Bunnell, J. W., Jr.

    1980-01-01

    A moving-base simulator experiment conducted at Ames Research Center demonstrated that a wings-level-turn control mode improved flying qualities for air-to-ground weapons delivery compared with those of a conventional aircraft. Evaluations of criteria for dynamic response for this system have shown that pilot ratings correlate well on the basis of equivalent time constant of the initial response. Ranges of this time constant, as well as digital-system transport delays and lateral-acceleration control authorities that encompassed Level I through Level III handling qualities, were determined.

  13. Aircraft model prototypes which have specified handling-quality time histories

    NASA Technical Reports Server (NTRS)

    Johnson, S. H.

    1976-01-01

    Several techniques for obtaining linear constant-coefficient airplane models from specified handling-quality time histories are discussed. One technique, the pseudodata method, solves the basic problem, yields specified eigenvalues, and accommodates state-variable transfer-function zero suppression. The method is fully illustrated for a fourth-order stability-axis small-motion model with three lateral handling-quality time histories specified. The FORTRAN program which obtains and verifies the model is included and fully documented.

  14. Air Quality Criteria for Ozone and Related Photochemical ...

    EPA Pesticide Factsheets

    In February 2006, EPA released the final document, Air Quality Criteria for Ozone and Other Photochemical Oxidants. Tropospheric or surface-level ozone (O3) is one of six major air pollutants regulated by National Ambient Air Quality Standards (NAAQS) under the U.S. Clean Air Act. As mandated by the Clean Air Act, the U.S. Environmental Protection Agency (EPA) must periodically review the scientific bases (or criteria) for the various NAAQS by assessing newly available scientific information on a given criteria air pollutant. This document, Air Quality Criteria for Ozone and Other Photochemical Oxidants, is an updated revision of the 1996 Ozone Air Quality Criteria Document (O3 AQCD) that provided scientific bases for the current O3 NAAQS set in 1997. The Clean Air Act mandates periodic review of the National Ambient Air Quality Standards (NAAQS) for six common air pollutants, also referred to as criteria pollutants, including ozone.

  15. Biological Water Quality Criteria

    EPA Pesticide Factsheets

    Page contains links to Technical Documents pertaining to Biological Water Quality Criteria, including, technical assistance documents for states, tribes and territories, program overviews, and case studies.

  16. Handling Qualities Evaluation of Pilot Tools for Spacecraft Docking in Earth Orbit

    NASA Technical Reports Server (NTRS)

    Bilimoria, Karl D.; Mueller, Eric; Frost, Chad

    2009-01-01

    A new generation of spacecraft is now under development by NASA to replace the Space Shuttle and return astronauts to the Moon. These spacecraft will have a manual control capability for several mission tasks, and the ease and precision with which pilots can execute these tasks will have an important effect on mission risk and training costs. This paper focuses on the handling qualities of a spacecraft based on dynamics similar to that of the Crew Exploration Vehicle, during the last segment of the docking task with a space station in low Earth orbit. A previous study established that handling qualities for this task degrade significantly as the level of translation-into-rotation coupling increases. The goal of this study is to evaluate the efficacy of various pilot aids designed to mitigate the handling qualities degradation caused by this coupling. Four pilot tools were ev adluaetead:d-band box/indicator, flight-path marker, translation guidance cues, and feed-forward control. Each of these pilot tools improved handling qualities, generally with greater improvements resulting from using these tools in combination. A key result of this study is that feedforward control effectively counteracts coupling effects, providing solid Level 1 handling qualities for the spacecraft configuration evaluated.

  17. Subsonic Wing Optimization for Handling Qualities Using ACSYNT

    NASA Technical Reports Server (NTRS)

    Soban, Danielle Suzanne

    1996-01-01

    The capability to accurately and rapidly predict aircraft stability derivatives using one comprehensive analysis tool has been created. The PREDAVOR tool has the following capabilities: rapid estimation of stability derivatives using a vortex lattice method, calculation of a longitudinal handling qualities metric, and inherent methodology to optimize a given aircraft configuration for longitudinal handling qualities, including an intuitive graphical interface. The PREDAVOR tool may be applied to both subsonic and supersonic designs, as well as conventional and unconventional, symmetric and asymmetric configurations. The workstation-based tool uses as its model a three-dimensional model of the configuration generated using a computer aided design (CAD) package. The PREDAVOR tool was applied to a Lear Jet Model 23 and the North American XB-70 Valkyrie.

  18. Flight-testing and frequency-domain analysis for rotorcraft handling qualities

    NASA Technical Reports Server (NTRS)

    Ham, Johnnie A.; Gardner, Charles K.; Tischler, Mark B.

    1995-01-01

    A demonstration of frequency-domain flight-testing techniques and analysis was performed on a U.S. Army OH-58D helicopter in support of the OH-58D Airworthiness and Flight Characteristics Evaluation and of the Army's development and ongoing review of Aeronautical Design Standard 33C, Handling Qualities Requirements for Military Rotorcraft. Hover and forward flight (60 kn) tests were conducted in 1 flight hour by Army experimental test pilots. Further processing of the hover data generated a complete database of velocity, angular-rate, and acceleration-frequency responses to control inputs. A joint effort was then undertaken by the Airworthiness Qualification Test Dirtectorate and the U.S. Army Aeroflightdynamics Directorate to derive handling-quality information from the frequency-domain database using a variety of approaches. This report documents numerous results that have been obtained from the simple frequency-domain tests; in many areas, these results provide more insight into the aircraft dynmamics that affect handling qualities than do traditional flight tests. The handling-quality results include ADS-33C bandwidth and phase-delay calculations, vibration spectral determinations, transfer-function models to examine single-axis results, and a six-degree-of-freedom fully coupled state-space model. The ability of this model to accurately predict responses was verified using data from pulse inputs. This report also documents the frequency-sweep flight-test technique and data analysis used to support the tests.

  19. An Investigation of Large Tilt-Rotor Hover and Low Speed Handling Qualities

    NASA Technical Reports Server (NTRS)

    Malpica, Carlos A.; Decker, William A.; Theodore, Colin R.; Lindsey, James E.; Lawrence, Ben; Blanken, Chris L.

    2011-01-01

    A piloted simulation experiment conducted on the NASA-Ames Vertical Motion Simulator evaluated the hover and low speed handling qualities of a large tilt-rotor concept, with particular emphasis on longitudinal and lateral position control. Ten experimental test pilots evaluated different combinations of Attitude Command-Attitude Hold (ACAH) and Translational Rate Command (TRC) response types, nacelle conversion actuator authority limits and inceptor choices. Pilots performed evaluations in revised versions of the ADS-33 Hover, Lateral Reposition and Depart/Abort MTEs and moderate turbulence conditions. Level 2 handling qualities ratings were primarily recorded using ACAH response type in all three of the evaluation maneuvers. The baseline TRC conferred Level 1 handling qualities in the Hover MTE, but there was a tendency to enter into a PIO associated with nacelle actuator rate limiting when employing large, aggressive control inputs. Interestingly, increasing rate limits also led to a reduction in the handling qualities ratings. This led to the identification of a nacelle rate to rotor longitudinal flapping coupling effect that induced undesired, pitching motions proportional to the allowable amount of nacelle rate. A modification that counteracted this effect significantly improved the handling qualities. Evaluation of the different response type variants showed that inclusion of TRC response could provide Level 1 handling qualities in the Lateral Reposition maneuver by reducing coupled pitch and heave off axis responses that otherwise manifest with ACAH. Finally, evaluations in the Depart/Abort maneuver showed that uncertainty about commanded nacelle position and ensuing aircraft response, when manually controlling the nacelle, demanded high levels of attention from the pilot. Additional requirements to maintain pitch attitude within 5 deg compounded the necessary workload.

  20. Motion-base simulator results of advanced supersonic transport handling qualities with active controls

    NASA Technical Reports Server (NTRS)

    Feather, J. B.; Joshi, D. S.

    1981-01-01

    Handling qualities of the unaugmented advanced supersonic transport (AST) are deficient in the low-speed, landing approach regime. Consequently, improvement in handling with active control augmentation systems has been achieved using implicit model-following techniques. Extensive fixed-based simulator evaluations were used to validate these systems prior to tests with full motion and visual capabilities on a six-axis motion-base simulator (MBS). These tests compared the handling qualities of the unaugmented AST with several augmented configurations to ascertain the effectiveness of these systems. Cooper-Harper ratings, tracking errors, and control activity data from the MBS tests have been analyzed statistically. The results show the fully augmented AST handling qualities have been improved to an acceptable level.

  1. Handling Qualities of Large Flexible Aircraft. Ph.D. Thesis

    NASA Technical Reports Server (NTRS)

    Poopaka, S.

    1980-01-01

    The effects on handling qualities of elastic modes interaction with the rigid body dynamics of a large flexible aircraft are studied by a mathematical computer simulation. An analytical method to predict the pilot ratings when there is a severe modes interactions is developed. This is done by extending the optimal control model of the human pilot response to include the mode decomposition mechanism into the model. The handling qualities are determined for a longitudinal tracking task using a large flexible aircraft with parametric variations in the undamped natural frequencies of the two lowest frequency, symmetric elastic modes made to induce varying amounts of mode interaction.

  2. Space shuttle flying qualities and criteria assessment

    NASA Technical Reports Server (NTRS)

    Myers, T. T.; Johnston, D. E.; Mcruer, Duane T.

    1987-01-01

    Work accomplished under a series of study tasks for the Flying Qualities and Flight Control Systems Design Criteria Experiment (OFQ) of the Shuttle Orbiter Experiments Program (OEX) is summarized. The tasks involved review of applicability of existing flying quality and flight control system specification and criteria for the Shuttle; identification of potentially crucial flying quality deficiencies; dynamic modeling of the Shuttle Orbiter pilot/vehicle system in the terminal flight phases; devising a nonintrusive experimental program for extraction and identification of vehicle dynamics, pilot control strategy, and approach and landing performance metrics, and preparation of an OEX approach to produce a data archive and optimize use of the data to develop flying qualities for future space shuttle craft in general. Analytic modeling of the Orbiter's unconventional closed-loop dynamics in landing, modeling pilot control strategies, verification of vehicle dynamics and pilot control strategy from flight data, review of various existent or proposed aircraft flying quality parameters and criteria in comparison with the unique dynamic characteristics and control aspects of the Shuttle in landing; and finally a summary of conclusions and recommendations for developing flying quality criteria and design guides for future Shuttle craft.

  3. BASIS FOR PRIMARY AIR QUALITY CRITERIA AND STANDARDS

    EPA Science Inventory

    The Environmental Criteria and Assessment Office and the Office of Air Quality Planning and Standards are charged with responsibility for reviewing and assessing air quality criteria and air quality standards, respectively. Since adoption of the 1977 Clean Air Act Amendments, the...

  4. Human Health Water Quality Criteria and Methods for Toxics

    EPA Pesticide Factsheets

    Documents pertaining to Human Health Water Quality Criteria and Methods for Toxins. Includes 2015 Update for Water Quality Criteria, 2002 National Recommended Human Health Criteria, and 2000 EPA Methodology.

  5. Photovoltaic system criteria documents. Volume 2: Quality assurance criteria for photovoltaic applications

    NASA Technical Reports Server (NTRS)

    Koenig, John C.; Billitti, Joseph W.; Tallon, John M.

    1979-01-01

    Quality assurance criteria are described for manufacturers and installers of solar photovoltaic tests and applications. Quality oriented activities are outlined to be pursued by the contractor/subcontractor to assure the physical and operational quality of equipment produced is included. In the broad sense, guidelines are provided for establishing a QA organization if none exists. Mainly, criteria is provided to be considered in any PV quality assurance plan selected as appropriate by the responsible Field Center. A framework is established for a systematic approach to ensure that photovoltaic tests and applications are constructed in a timely and cost effective manner.

  6. Aircraft model prototypes which have specified handling-quality time histories

    NASA Technical Reports Server (NTRS)

    Johnson, S. H.

    1978-01-01

    Several techniques for obtaining linear constant-coefficient airplane models from specified handling-quality time histories are discussed. The pseudodata method solves the basic problem, yields specified eigenvalues, and accommodates state-variable transfer-function zero suppression. The algebraic equations to be solved are bilinear, at worst. The disadvantages are reduced generality and no assurance that the resulting model will be airplane like in detail. The method is fully illustrated for a fourth-order stability-axis small motion model with three lateral handling quality time histories specified. The FORTRAN program which obtains and verifies the model is included and fully documented.

  7. [Quality criteria in medicine: which limits?].

    PubMed

    Minvielle, E

    2006-06-01

    This article aims to develop a critical appraisal of the criteria's development in medicine. The COMPAQH (Coordination for Measuring Performance and Assuring Quality in Hospitals) project (Ministry of Health/ High Authority of Health/ National Institute of Medical Research) helps to support this analysis. This project based on the test of 42 Quality indicators (QI) gives findings not only about the manner to build criteria, but also to interpret and diffuse results among physicians and hospital managers. Criteria must be elaborated in a pragmatic way. They must be in compliance with practice guidelines supported by scientific evidences. The associated risk is to create and develop a normative medicine. Collaboration with professional societies may be useful in preventing this risk.

  8. Criteria for High Quality Biology Teaching: An Analysis

    ERIC Educational Resources Information Center

    Tasci, Guntay

    2015-01-01

    This study aims to analyze the process under which biology lessons are taught in terms of teaching quality criteria (TQC). Teaching quality is defined as the properties of efficient teaching and is considered to be the criteria used to measure teaching quality both in general and specific to a field. The data were collected through classroom…

  9. Adopting Quality Criteria for Websites Providing Medical Information About Rare Diseases.

    PubMed

    Pauer, Frédéric; Göbel, Jens; Storf, Holger; Litzkendorf, Svenja; Babac, Ana; Frank, Martin; Lührs, Verena; Schauer, Franziska; Schmidtke, Jörg; Biehl, Lisa; Wagner, Thomas Of; Ückert, Frank; Graf von der Schulenburg, Johann-Matthias; Hartz, Tobias

    2016-08-25

    The European Union considers diseases to be rare when they affect less than 5 in 10,000 people. It is estimated that there are between 5000 and 8000 different rare diseases. Consistent with this diversity, the quality of information available on the Web varies considerably. Thus, quality criteria for websites about rare diseases are needed. The objective of this study was to generate a catalog of quality criteria suitable for rare diseases. First, relevant certificates and quality recommendations for health information websites were identified through a comprehensive Web search. Second, all considered quality criteria of each certification program and catalog were examined, extracted into an overview table, and analyzed by thematic content. Finally, an interdisciplinary expert group verified the relevant quality criteria. We identified 9 quality certificates and criteria catalogs for health information websites with 304 single criteria items. Through this, we aggregated 163 various quality criteria, each assigned to one of the following categories: thematic, technical, service, content, and legal. Finally, a consensus about 13 quality criteria for websites offering medical information on rare diseases was determined. Of these categories, 4 (data protection concept, imprint, creation and updating date, and possibility to contact the website provider) were identified as being the most important for publishing medical information about rare diseases. The large number of different quality criteria appearing within a relatively small number of criteria catalogs shows that the opinion of what is important in the quality of health information differs. In addition, to define useful quality criteria for websites about rare diseases, which are an essential source of information for many patients, a trade-off is necessary between the high standard of quality criteria for health information websites in general and the limited provision of information about some rare diseases

  10. 33 CFR 154.1045 - Response plan development and evaluation criteria for facilities that handle, store, or transport...

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... 33 Navigation and Navigable Waters 2 2013-07-01 2013-07-01 false Response plan development and... (CONTINUED) POLLUTION FACILITIES TRANSFERRING OIL OR HAZARDOUS MATERIAL IN BULK Response Plans for Oil Facilities § 154.1045 Response plan development and evaluation criteria for facilities that handle, store, or...

  11. 33 CFR 154.1045 - Response plan development and evaluation criteria for facilities that handle, store, or transport...

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 33 Navigation and Navigable Waters 2 2011-07-01 2011-07-01 false Response plan development and... (CONTINUED) POLLUTION FACILITIES TRANSFERRING OIL OR HAZARDOUS MATERIAL IN BULK Response Plans for Oil Facilities § 154.1045 Response plan development and evaluation criteria for facilities that handle, store, or...

  12. 33 CFR 154.1045 - Response plan development and evaluation criteria for facilities that handle, store, or transport...

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... 33 Navigation and Navigable Waters 2 2012-07-01 2012-07-01 false Response plan development and... (CONTINUED) POLLUTION FACILITIES TRANSFERRING OIL OR HAZARDOUS MATERIAL IN BULK Response Plans for Oil Facilities § 154.1045 Response plan development and evaluation criteria for facilities that handle, store, or...

  13. 33 CFR 154.1045 - Response plan development and evaluation criteria for facilities that handle, store, or transport...

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... 33 Navigation and Navigable Waters 2 2014-07-01 2014-07-01 false Response plan development and... (CONTINUED) POLLUTION FACILITIES TRANSFERRING OIL OR HAZARDOUS MATERIAL IN BULK Response Plans for Oil Facilities § 154.1045 Response plan development and evaluation criteria for facilities that handle, store, or...

  14. AIR QUALITY CRITERIA FOR OZONE AND RELATED PHOTOCHEMICAL OXIDANTS

    EPA Science Inventory

    The Clean Air Act requires periodic (5-year) update revision of criteria and National Ambient Air Quality Standards (NAAQS) for Ozone. The previous revision of the criteria contained in the Air Quality Criteria Document (AQCD) for Ozone and Related Photochemical Oxidants was co...

  15. Flight testing and frequency domain analysis for rotorcraft handling qualities characteristics

    NASA Technical Reports Server (NTRS)

    Ham, Johnnie A.; Gardner, Charles K.; Tischler, Mark B.

    1993-01-01

    A demonstration of frequency domain flight testing techniques and analyses was performed on a U.S. Army OH-58D helicopter in support of the OH-58D Airworthiness and Flight Characteristics Evaluation and the Army's development and ongoing review of Aeronautical Design Standard 33C, Handling Qualities Requirements for Military Rotorcraft. Hover and forward flight (60 knots) tests were conducted in 1 flight hour by Army experimental test pilots. Further processing of the hover data generated a complete database of velocity, angular rate, and acceleration frequency responses to control inputs. A joint effort was then undertaken by the Airworthiness Qualification Test Directorate (AQTD) and the U.S. Army Aeroflightdynamics Directorate (AFDD) to derive handling qualities information from the frequency response database. A significant amount of information could be extracted from the frequency domain database using a variety of approaches. This report documents numerous results that have been obtained from the simple frequency domain tests; in many areas, these results provide more insight into the aircraft dynamics that affect handling qualities than to traditional flight tests. The handling qualities results include ADS-33C bandwidth and phase delay calculations, vibration spectral determinations, transfer function models to examine single axis results, and a six degree of freedom fully coupled state space model. The ability of this model to accurately predict aircraft responses was verified using data from pulse inputs. This report also documents the frequency-sweep flight test technique and data analysis used to support the tests.

  16. AIR QUALITY CRITERIA CARBON MONOXIDE, EXTERNAL REVIEW DRAFT

    EPA Science Inventory

    The U.S. Environmental Protection Agency (EPA) promulgates the National Ambient Air Quality Standards (NAAQS) on the basis of scientific information contained in criteria documents. The last air quality criteria document for carbon monoxide (CO) was completed by EPA in 1991. This...

  17. Exploratory piloted simulator study of the effects of winglets on handling qualities of a representative agricultural airplane

    NASA Technical Reports Server (NTRS)

    Ogburn, M. E.; Brown, P. W.

    1980-01-01

    The effects on handling qualities of adding winglets to a representative agricultural aircraft configuration during swath-run maneuvering were evaluated. Aerodynamic data used in the simulation were based on low-speed wind tunnel tests of a full scale airplane and a subscale model. The Cooper-Harper handling qualities rating scale, supplementary pilot comments, and pilot vehicle performance data were used to describe the handling qualities of the airplane with the different wing-tip configurations. Results showed that the lateral-directional handling qualities of the airplane were greatly affected by the application of winglets and winglet cant angle. The airplane with winglets canted out 20 deg exhibited severely degraded lateral directional handling qualities in comparison to the basic airplane. When the winglets were canted inward 10 deg, the flying qualities of the configuration were markedly improved over those of the winglet-canted-out configuration or the basic configuration without winglets, indicating that proper tailoring of the winglet design may afford a potential benefit in the area of handling qualities.

  18. Microphone Handling Noise: Measurements of Perceptual Threshold and Effects on Audio Quality

    PubMed Central

    Kendrick, Paul; Jackson, Iain R.; Fazenda, Bruno M.; Cox, Trevor J.; Li, Francis F.

    2015-01-01

    A psychoacoustic experiment was carried out to test the effects of microphone handling noise on perceived audio quality. Handling noise is a problem affecting both amateurs using their smartphones and cameras, as well as professionals using separate microphones and digital recorders. The noises used for the tests were measured from a variety of devices, including smartphones, laptops and handheld microphones. The signal features that characterise these noises are analysed and presented. The sounds include various types of transient, impact noises created by tapping or knocking devices, as well as more sustained sounds caused by rubbing. During the perceptual tests, listeners auditioned speech podcasts and were asked to rate the degradation of any unwanted sounds they heard. A representative design test methodology was developed that tried to encourage everyday rather than analytical listening. Signal-to-noise ratio (SNR) of the handling noise events was shown to be the best predictor of quality degradation. Other factors such as noise type or background noise in the listening environment did not significantly affect quality ratings. Podcast, microphone type and reproduction equipment were found to be significant but only to a small extent. A model allowing the prediction of degradation from the SNR is presented. The SNR threshold at which 50% of subjects noticed handling noise was found to be 4.2 ± 0.6 dBA. The results from this work are important for the understanding of our perception of impact sound and resonant noises in recordings, and will inform the future development of an automated predictor of quality for handling noise. PMID:26473498

  19. Adopting Quality Criteria for Websites Providing Medical Information About Rare Diseases

    PubMed Central

    Göbel, Jens; Storf, Holger; Litzkendorf, Svenja; Babac, Ana; Frank, Martin; Lührs, Verena; Schauer, Franziska; Schmidtke, Jörg; Biehl, Lisa; Wagner, Thomas OF; Ückert, Frank; Graf von der Schulenburg, Johann-Matthias; Hartz, Tobias

    2016-01-01

    Background The European Union considers diseases to be rare when they affect less than 5 in 10,000 people. It is estimated that there are between 5000 and 8000 different rare diseases. Consistent with this diversity, the quality of information available on the Web varies considerably. Thus, quality criteria for websites about rare diseases are needed. Objective The objective of this study was to generate a catalog of quality criteria suitable for rare diseases. Methods First, relevant certificates and quality recommendations for health information websites were identified through a comprehensive Web search. Second, all considered quality criteria of each certification program and catalog were examined, extracted into an overview table, and analyzed by thematic content. Finally, an interdisciplinary expert group verified the relevant quality criteria. Results We identified 9 quality certificates and criteria catalogs for health information websites with 304 single criteria items. Through this, we aggregated 163 various quality criteria, each assigned to one of the following categories: thematic, technical, service, content, and legal. Finally, a consensus about 13 quality criteria for websites offering medical information on rare diseases was determined. Of these categories, 4 (data protection concept, imprint, creation and updating date, and possibility to contact the website provider) were identified as being the most important for publishing medical information about rare diseases. Conclusions The large number of different quality criteria appearing within a relatively small number of criteria catalogs shows that the opinion of what is important in the quality of health information differs. In addition, to define useful quality criteria for websites about rare diseases, which are an essential source of information for many patients, a trade-off is necessary between the high standard of quality criteria for health information websites in general and the limited

  20. A compilation and analysis of helicopter handling qualities data. Volume 2: Data analysis

    NASA Technical Reports Server (NTRS)

    Heffley, R. K.

    1979-01-01

    A compilation and an analysis of helicopter handling qualities data are presented. Multiloop manual control methods are used to analyze the descriptive data, stability derivatives, and transfer functions for a six degrees of freedom, quasi static model. A compensatory loop structure is applied to coupled longitudinal, lateral and directional equations in such a way that key handling qualities features are examined directly.

  1. A design procedure for the handling qualities optimization of the X-29A aircraft

    NASA Technical Reports Server (NTRS)

    Bosworth, John T.; Cox, Timothy H.

    1989-01-01

    A design technique for handling qualities improvement was developed for the X-29A aircraft. As with any new aircraft, the X-29A control law designers were presented with a relatively high degree of uncertainty in their mathematical models. The presence of uncertainties, and the high level of static instability of the X-29A caused the control law designers to stress stability and robustness over handling qualities. During flight test, the mathematical models of the vehicle were validated or corrected to match the vehicle dynamic behavior. The updated models were then used to fine tune the control system to provide fighter-like handling characteristics. A design methodology was developed which works within the existing control system architecture to provide improved handling qualities and acceptable stability with a minimum of cost in both implementation as well as software verification and validation.

  2. Handling Qualities of Large Rotorcraft in Hover and Low Speed

    NASA Technical Reports Server (NTRS)

    Malpica, Carlos; Theodore, Colin R.; Lawrence , Ben; Blanken, Chris L.

    2015-01-01

    According to a number of system studies, large capacity advanced rotorcraft with a capability of high cruise speeds (approx.350 mph) as well as vertical and/or short take-off and landing (V/STOL) flight could alleviate anticipated air transportation capacity issues by making use of non-primary runways, taxiways, and aprons. These advanced aircraft pose a number of design challenges, as well as unknown issues in the flight control and handling qualities domains. A series of piloted simulation experiments have been conducted on the NASA Ames Research Center Vertical Motion Simulator (VMS) in recent years to systematically investigate the fundamental flight control and handling qualities issues associated with the characteristics of large rotorcraft, including tiltrotors, in hover and low-speed maneuvering.

  3. Ground-to-Flight Handling Qualities Comparisons for a High Performance Airplane

    NASA Technical Reports Server (NTRS)

    Brandon, Jay M.; Glaab, Louis J.; Brown, Philip W.; Phillips, Michael R.

    1995-01-01

    A flight test program was conducted in conjunction with a ground-based piloted simulation study to enable a comparison of handling qualities ratings for a variety of maneuvers between flight and simulation of a modern high performance airplane. Specific objectives included an evaluation of pilot-induced oscillation (PIO) tendencies and a determination of maneuver types which result in either good or poor ground-to-flight pilot handling qualities ratings. A General Dynamics F-16XL aircraft was used for the flight evaluations, and the NASA Langley Differential Maneuvering Simulator was employed for the ground based evaluations. Two NASA research pilots evaluated both the airplane and simulator characteristics using tasks developed in the simulator. Simulator and flight tests were all conducted within approximately a one month time frame. Maneuvers included numerous fine tracking evaluations at various angles of attack, load factors and speed ranges, gross acquisitions involving longitudinal and lateral maneuvering, roll angle captures, and an ILS task with a sidestep to landing. Overall results showed generally good correlation between ground and flight for PIO tendencies and general handling qualities comments. Differences in pilot technique used in simulator evaluations and effects of airplane accelerations and motions are illustrated.

  4. Inverse simulation system for evaluating handling qualities during rendezvous and docking

    NASA Astrophysics Data System (ADS)

    Zhou, Wanmeng; Wang, Hua; Thomson, Douglas; Tang, Guojin; Zhang, Fan

    2017-08-01

    The traditional method used for handling qualities assessment of manned space vehicles is too time-consuming to meet the requirements of an increasingly fast design process. In this study, a rendezvous and docking inverse simulation system to assess the handling qualities of spacecraft is proposed using a previously developed model-predictive-control architecture. By considering the fixed discrete force of the thrusters of the system, the inverse model is constructed using the least squares estimation method with a hyper-ellipsoidal restriction, the continuous control outputs of which are subsequently dispersed by pulse width modulation with sensitivity factors introduced. The inputs in every step are deemed constant parameters, and the method could be considered as a general method for solving nominal, redundant, and insufficient inverse problems. The rendezvous and docking inverse simulation is applied to a nine-degrees-of-freedom platform, and a novel handling qualities evaluation scheme is established according to the operation precision and astronauts' workload. Finally, different nominal trajectories are scored by the inverse simulation and an established evaluation scheme. The scores can offer theoretical guidance for astronaut training and more complex operation missions.

  5. DEVELOPING WATER QUALITY CRITERIA FOR SUSPENDED AND BEDDED SEDIMENTS

    EPA Science Inventory

    The U.S. EPA’s Framework for Developing Suspended and Bedded Sediments (SABS) Water Quality Criteria (SABS Framework) is a nationally-consistent process for developing ambient sediment quality criteria for surface waters. The SABS Framework accommodates natural variation among wa...

  6. Handling qualities of large flexible control-configured aircraft

    NASA Technical Reports Server (NTRS)

    Swaim, R. L.

    1979-01-01

    The approach to an analytical study of flexible airplane longitudinal handling qualities was to parametrically vary the natural frequencies of two symmetric elastic modes to induce mode interactions with the rigid body dynamics. Since the structure of the pilot model was unknown for such dynamic interactions, the optimal control pilot modeling method is being applied and used in conjunction with pilot rating method.

  7. 78 FR 20252 - Water Quality Standards; Withdrawal of Certain Federal Water Quality Criteria Applicable to...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-04-04

    ... aquatic life water quality criteria applicable to waters of New Jersey, Puerto Rico, and California's San Francisco Bay. In 1992, EPA promulgated the National Toxics Rule or NTR to establish numeric water quality... Water Quality Standards; Withdrawal of Certain Federal Water Quality Criteria Applicable to California...

  8. Air Quality Criteria for Particulate Matter.

    ERIC Educational Resources Information Center

    National Air Pollution Control Administration (DHEW), Washington, DC.

    To assist states in developing air quality standards, this book offers a review of literature related to atmospheric particulates and the development of criteria for air quality. It not only summarizes the current scientific knowledge of particulate air pollution, but points up the major deficiencies in that knowledge and the need for further…

  9. Handling qualities related to stall/spin accidents of supersonic fighter aircraft

    NASA Technical Reports Server (NTRS)

    Anderson, S. B.

    1984-01-01

    This paper reviews the handling qualities which influence the high angle of attack (AOA) behavior of supersonic fighter aircraft in order to obtain a clearer understanding of the causes of stall/spin accidents. The results show that, because modern fighters suffer more serious consequences when control is lost, good handling qualities are essential for safe operation at high AOA. Relaxed static stability used on some fighter aircraft can result in control problems at high AOA owing to inertia coupling and the difficulty of a recovery from a deep stall. Indications are that the use of departure/spin resistance and an automatic spin prevention system will greatly improve the safety record for modern supersonic fighters.

  10. Orion Handling Qualities During ISS Rendezvous and Docking

    NASA Technical Reports Server (NTRS)

    Hart, Jeremy J.; Stephens, J. P.; Spehar, P.; Bilimoria, K.; Foster, C.; Gonzalex, R.; Sullivan, K.; Jackson, B.; Brazzel, J.; Hart, J.

    2011-01-01

    The Orion spacecraft was designed to rendezvous with multiple vehicles in low earth orbit (LEO) and beyond. To perform the required rendezvous and docking task, Orion must provide enough control authority to perform coarse translational maneuvers while maintaining precision to perform the delicate docking corrections. While Orion has autonomous docking capabilities, it is expected that final approach and docking operations with the International Space Station (ISS) will initially be performed in a manual mode. A series of evaluations was conducted by NASA and Lockheed Martin at the Johnson Space Center to determine the handling qualities (HQ) of the Orion spacecraft during different docking and rendezvous conditions using the Cooper-Harper scale. This paper will address the specifics of the handling qualities methodology, vehicle configuration, scenarios flown, data collection tools, and subject ratings and comments. The initial Orion HQ assessment examined Orion docking to the ISS. This scenario demonstrates the Translational Hand Controller (THC) handling qualities of Orion. During this initial assessment, two different scenarios were evaluated. The first was a nominal docking approach to a stable ISS, with Orion initializing with relative position dispersions and a closing rate of approximately 0.1 ft/sec. The second docking scenario was identical to the first, except the attitude motion of the ISS was modeled to simulate a stress case ( 1 degree deadband per axis and 0.01 deg/sec rate deadband per axis). For both scenarios, subjects started each run on final approach at a docking port-to-port range of 20 ft. Subjects used the THC in pulse mode with cues from the docking camera image, window views, and range and range rate data displayed on the Orion display units. As in the actual design, the attitude of the Orion vehicle was held by the automated flight control system at 0.5 degree deadband per axis. Several error sources were modeled including Reaction

  11. Aquatic Plant Water Quality Criteria

    EPA Science Inventory

    The USEPA, as stated in the Clean Water Act, is tasked with developing numerical Aquatic Life Critiera for various pollutants found in the waters of the United States. These criteria serve as guidance for States and Tribes to use in developing their water quality standards. The G...

  12. Microbial (Pathogen)/Recreational Water Quality Criteria

    EPA Pesticide Factsheets

    Documents pertaining to Recreational Human Health Ambient Water Quality Criteria for Microbial Organisms (Pathogens). These documents include safe levels for cyanotoxins microcystin and cylindrospermopsin, and Coliphage to protect human health.

  13. 40 CFR 227.31 - Applicable marine water quality criteria.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 40 Protection of Environment 24 2010-07-01 2010-07-01 false Applicable marine water quality criteria. 227.31 Section 227.31 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) OCEAN DUMPING CRITERIA FOR THE EVALUATION OF PERMIT APPLICATIONS FOR OCEAN DUMPING OF MATERIALS Definitions § 227.31 Applicable marine water quality...

  14. 40 CFR 227.31 - Applicable marine water quality criteria.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... 40 Protection of Environment 26 2013-07-01 2013-07-01 false Applicable marine water quality criteria. 227.31 Section 227.31 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) OCEAN DUMPING CRITERIA FOR THE EVALUATION OF PERMIT APPLICATIONS FOR OCEAN DUMPING OF MATERIALS Definitions § 227.31 Applicable marine water quality...

  15. Developing Water Quality Criteria for Suspended and Bedded Sediments (SABs)

    EPA Pesticide Factsheets

    This paper provides an introduction to SABS and water quality criteria and discusses the types and status of water quality criteria that have been or are currently being used by the States, Canada and elsewhere.

  16. Effects of simulator motion and visual characteristics on rotorcraft handling qualities evaluations

    NASA Technical Reports Server (NTRS)

    Mitchell, David G.; Hart, Daniel C.

    1993-01-01

    The pilot's perceptions of aircraft handling qualities are influenced by a combination of the aircraft dynamics, the task, and the environment under which the evaluation is performed. When the evaluation is performed in a groundbased simulator, the characteristics of the simulation facility also come into play. Two studies were conducted on NASA Ames Research Center's Vertical Motion Simulator to determine the effects of simulator characteristics on perceived handling qualities. Most evaluations were conducted with a baseline set of rotorcraft dynamics, using a simple transfer-function model of an uncoupled helicopter, under different conditions of visual time delays and motion command washout filters. Differences in pilot opinion were found as the visual and motion parameters were changed, reflecting a change in the pilots' perceptions of handling qualities, rather than changes in the aircraft model itself. The results indicate a need for tailoring the motion washout dynamics to suit the task. Visual-delay data are inconclusive but suggest that it may be better to allow some time delay in the visual path to minimize the mismatch between visual and motion, rather than eliminate the visual delay entirely through lead compensation.

  17. Effects of rotor parameter variations on handling qualities of unaugmented helicopters in simulated terrain flight

    NASA Technical Reports Server (NTRS)

    Talbot, P. D.; Dugan, D. D.; Chen, R. T. N.; Gerdes, R. M.

    1980-01-01

    A coordinated analysis and ground simulator experiment was performed to investigate the effects on single rotor helicopter handling qualities of systematic variations in the main rotor hinge restraint, hub hinge offset, pitch-flap coupling, and blade lock number. Teetering rotor, articulated rotor, and hingeless rotor helicopters were evaluated by research pilots in special low level flying tasks involving obstacle avoidance at 60 to 100 knots airspeed. The results of the experiment are in the form of pilot ratings, pilot commentary, and some objective performance measures. Criteria for damping and sensitivity are reexamined when combined with the additional factors of cross coupling due to pitch and roll rates, pitch coupling with collective pitch, and longitudinal static stability. Ratings obtained with and without motion are compared. Acceptable flying qualities were obtained within each rotor type by suitable adjustment of the hub parameters, however, pure teetering rotors were found to lack control power for the tasks. A limit for the coupling parameter L sub q/L sub p of 0.35 is suggested.

  18. A pilot's assessment of helicopter handling-quality factors common to both agility and instrument flying tasks

    NASA Technical Reports Server (NTRS)

    Gerdes, R. M.

    1980-01-01

    A series of simulation and flight investigations were undertaken to evaluate helicopter flying qualities and the effects of control system augmentation for nap-of-the-Earth (NOE) agility and instrument flying tasks. Handling quality factors common to both tasks were identified. Precise attitude control was determined to be a key requirement for successful accomplishment of both tasks. Factors that degraded attitude controllability were improper levels of control sensitivity and damping, and rotor system cross coupling due to helicopter angular rate and collective pitch input. Application of rate command, attitude command, and control input decouple augmentation schemes enhanced attitude control and significantly improved handling qualities for both tasks. The NOE agility and instrument flying handling quality considerations, pilot rating philosophy, and supplemental flight evaluations are also discussed.

  19. Some lessons learned in three years with ADS-33C. [rotorcraft handling qualities specification

    NASA Technical Reports Server (NTRS)

    Key, David L.; Blanken, Chris L.; Hoh, Roger H.

    1993-01-01

    Three years of using the U.S. Army's rotorcraft handling qualities specification, Aeronautical Design Standard - 33, has shown it to be surprisingly robust. It appears to provide an excellent basis for design and for assessment, however, as the subtleties become more well understood, several areas needing refinement became apparent. Three responses to these needs have been documented in this paper: (1) The yaw-axis attitude quickness for hover target acquisition and tracking can be relaxed slightly. (2) Understanding and application of criteria for degraded visual environments needed elaboration. This and some guidelines for testing to obtain visual cue ratings have been documented. (3) The flight test maneuvers were an innovation that turned out to be very valuable. Their extensive use has made it necessary to tighten definitions and testing guidance. This was accomplished for a good visual environment and is underway for degraded visual environments.

  20. eEurope 2002: Quality Criteria for Health related Websites

    PubMed Central

    2002-01-01

    Background A number of organisations have begun to provide specific tools for searching, rating, and grading this information, while others have set up codes of conduct by which site providers can attest to their high quality services. The aim of such tools is to assist individuals to sift through the mountains of information available so as to be better able to discern valid and reliable messages from those which are misleading or inaccurate. Objective Recognising that European citizens are avid consumers of health related information on the internet and recognising that they are already using the types of rating system described above, the European Council at Feira on June 19-20 2000 supported an initiative within eEurope 2002 to develop a core set of Quality Criteria for Health Related Websites. The specific aim was to draw up a commonly agreed set of simple quality criteria on which Member States, as well as public and private bodies, may draw in the development of quality initiatives for health related websites. These criteria should be applied in addition to relevant Community law. Methods A meeting was held during 2001 which drew together key players from Government departments, International Organisations, non-governmental organisations and industry, to explore current practices and experiments in this field. Some sixty invited participants from all the Member States, Norway, Switzerland, and the United States of America took part in the meeting of June 7-8, 2001: they included delegates from industrial, medical, and patient interest groups, delegates from Member States' governments, and key invited speakers from the field of health information ethics. These individuals, and many others, also took part in the web-based consultation which was open from august to November 2001. Results The broad headings for quality criteria identified include Transparency and Honesty, Authority, Privacy and data protection, Updating of information, Accountability

  1. Initial Investigation of Reaction Control System Design on Spacecraft Handling Qualities for Earth Orbit Docking

    NASA Technical Reports Server (NTRS)

    Bailey, Randall E.; Jackson, E. Bruce; Goodrich, Kenneth H.; Ragsdale, W. Al; Neuhaus, Jason; Barnes, Jim

    2008-01-01

    A program of research, development, test, and evaluation is planned for the development of Spacecraft Handling Qualities guidelines. In this first experiment, the effects of Reaction Control System design characteristics and rotational control laws were evaluated during simulated proximity operations and docking. Also, the influence of piloting demands resulting from varying closure rates was assessed. The pilot-in-the-loop simulation results showed that significantly different spacecraft handling qualities result from the design of the Reaction Control System. In particular, cross-coupling between translational and rotational motions significantly affected handling qualities as reflected by Cooper-Harper pilot ratings and pilot workload, as reflected by Task-Load Index ratings. This influence is masked but only slightly by the rotational control system mode. While rotational control augmentation using Rate Command Attitude Hold can reduce the workload (principally, physical workload) created by cross-coupling, the handling qualities are not significantly improved. The attitude and rate deadbands of the RCAH introduced significant mental workload and control compensation to evaluate when deadband firings would occur, assess their impact on docking performance, and apply control inputs to mitigate that impact.

  2. Efficient halal bleeding, animal handling, and welfare: A holistic approach for meat quality.

    PubMed

    Aghwan, Z A; Bello, A U; Abubakar, A A; Imlan, J C; Sazili, A Q

    2016-11-01

    Traditional halal slaughter and other forms of religious slaughter are still an issue of debate. Opposing arguments related to pre-slaughter handling, stress and pain associated with restraint, whether the incision is painful or not, and the onset of unconsciousness have been put forward, but no consensus has been achieved. There is a need to strike a balance between halal bleeding in the light of science and animal welfare. There is a paucity of scientific data with respect to animal welfare, particularly the use of restraining devices, animal handling, and efficient halal bleeding. However, this review found that competent handling of animals, proper use of restraining devices, and the efficient bleeding process that follows halal slaughter maintains meat eating quality. In conclusion, halal bleeding, when carried out in accordance with recommended animal welfare procedures, will not only maintain the quality and wholesomeness of meat but could also potentially reduce suffering and pain. Maintained meat quality increases consumer satisfaction and food safety. Copyright © 2016. Published by Elsevier Ltd.

  3. Handling Qualities Prediction of an F-16XL-Based Reduced Sonic Boom Aircraft

    NASA Technical Reports Server (NTRS)

    Cogan, Bruce; Yoo, Seung

    2010-01-01

    A major goal of the Supersonics Project under NASA s Fundamental Aeronautics program is sonic boom reduction of supersonic aircraft. An important part of this effort is development and validation of sonic boom prediction tools used in aircraft design. NASA Dryden s F- 16XL was selected as a potential testbed aircraft to provide flight validation. Part of this task was predicting the handling qualities of the modified aircraft. Due to the high cost of modifying the existing F-16XL control laws, it was desirable to find modifications that reduced the aircraft sonic boom but did not degrade baseline aircraft handling qualities allowing for the potential of flight test without changing the current control laws. This was not a requirement for the initial modification design work, but an important consideration for proceeding to the flight test option. The primary objective of this work was to determine an aerodynamic and mass properties envelope of the F-16XL aircraft. The designers could use this envelope to determine the effect of proposed modifications on aircraft handling qualities.

  4. Handling Qualities of a Large Civil Tiltrotor in Hover using Translational Rate Command

    NASA Technical Reports Server (NTRS)

    Malpica, Carlos A.; Theodore, Colin R.; Lawrence, Ben; Lindsey, James; Blanken, Chris

    2012-01-01

    A Translational Rate Command (TRC) control law has been developed to enable low speed maneuvering of a large civil tiltrotor with minimal pitch changes by means of automatic nacelle angle deflections for longitudinal velocity control. The nacelle actuator bandwidth required to achieve Level 1 handling qualities in hover and the feasibility of additional longitudinal cyclic control to augment low bandwidth nacelle actuation were investigated. A frequency-domain handling qualities criterion characterizing TRC response in terms of bandwidth and phase delay was proposed and validated against a piloted simulation conducted on the NASA-Ames Vertical Motion Simulator. Seven experimental test pilots completed evaluations in the ADS-33E-PRF Hover Mission Task Element (MTE) for a matrix of nacelle actuator bandwidths, equivalent rise times and control response sensitivities, and longitudinal cyclic control allocations. Evaluated against this task, longitudinal phase delay shows the Level 1 boundary is around 0.4 0.5 s. Accordingly, Level 1 handling qualities were achieved either with a nacelle actuator bandwidth greater than 4 rad/s, or by employing longitudinal cyclic control to augment low bandwidth nacelle actuation.

  5. Prediction of aircraft handling qualities using analytical models of the human pilot

    NASA Technical Reports Server (NTRS)

    Hess, R. A.

    1982-01-01

    The optimal control model (OCM) of the human pilot is applied to the study of aircraft handling qualities. Attention is focused primarily on longitudinal tasks. The modeling technique differs from previous applications of the OCM in that considerable effort is expended in simplifying the pilot/vehicle analysis. After briefly reviewing the OCM, a technique for modeling the pilot controlling higher order systems is introduced. Following this, a simple criterion for determining the susceptibility of an aircraft to pilot-induced oscillations (PIO) is formulated. Finally, a model-based metric for pilot rating prediction is discussed. The resulting modeling procedure provides a relatively simple, yet unified approach to the study of a variety of handling qualities problems.

  6. Prediction of aircraft handling qualities using analytical models of the human pilot

    NASA Technical Reports Server (NTRS)

    Hess, R. A.

    1982-01-01

    The optimal control model (OCM) of the human pilot is applied to the study of aircraft handling qualities. Attention is focused primarily on longitudinal tasks. The modeling technique differs from previous applications of the OCM in that considerable effort is expended in simplifying the pilot/vehicle analysis. After briefly reviewing the OCM, a technique for modeling the pilot controlling higher order systems is introduced. Following this, a simple criterion for determining the susceptibility of an aircraft to pilot induced oscillations is formulated. Finally, a model based metric for pilot rating prediction is discussed. The resulting modeling procedure provides a relatively simple, yet unified approach to the study of a variety of handling qualities problems.

  7. A pilot's assessment of helicopter handling-quality factors common to both agility and instrument flying tasks

    NASA Technical Reports Server (NTRS)

    Gerdes, R. M.

    1980-01-01

    Results from a series of simulation and flight investigations undertaken to evaluate helicopter flying qualities and the effects of control system augmentation for nap-of-the-earth (NOE) agility and instrument flying tasks were analyzed to assess handling-quality factors common to both tasks. Precise attitude control was determined to be a key requirement for successful accomplishment of both tasks. Factors that degraded attitude controllability were improper levels of control sensitivity and damping and rotor-system cross-coupling due to helicopter angular rate and collective pitch input. Application of rate-command, attitude-command, and control-input decouple augmentation schemes enhanced attitude control and significantly improved handling qualities for both tasks. NOE agility and instrument flying handling-quality considerations, pilot rating philosophy, and supplemental flight evaluations are also discussed.

  8. Primary display latency criteria based on flying qualities and performance data

    NASA Technical Reports Server (NTRS)

    Funk, John D., Jr.; Beck, Corin P.; Johns, John B.

    1993-01-01

    With a pilots' increasing use of visual cue augmentation, much requiring extensive pre-processing, there is a need to establish criteria for new avionics/display design. The timeliness and synchronization of the augmented cues is vital to ensure the performance quality required for precision mission task elements (MTEs) where augmented cues are the primary source of information to the pilot. Processing delays incurred while transforming sensor-supplied flight information into visual cues are unavoidable. Relationships between maximum control system delays and associated flying qualities levels are documented in MIL-F-83300 and MIL-F-8785. While cues representing aircraft status may be just as vital to the pilot as prompt control response for operations in instrument meteorological conditions, presently, there are no specification requirements on avionics system latency. To produce data relating avionics system latency to degradations in flying qualities, the Navy conducted two simulation investigations. During the investigations, flying qualities and performance data were recorded as simulated avionics system latency was varied. Correlated results of the investigation indicates that there is a detrimental impact of latency on flying qualities. Analysis of these results and consideration of key factors influencing their application indicate that: (1) Task performance degrades and pilot workload increases as latency is increased. Inconsistency in task performance increases as latency increases. (2) Latency reduces the probability of achieving Level 1 handling qualities with avionics system latency as low as 70 ms. (3) The data suggest that the achievement of desired performance will be ensured only at display latency values below 120 ms. (4) These data also suggest that avoidance of inadequate performance will be ensured only at display latency values below 150 ms.

  9. Dynamic stability and handling qualities tests on a highly augmented, statically unstable airplane

    NASA Technical Reports Server (NTRS)

    Gera, Joseph; Bosworth, John T.

    1987-01-01

    Novel flight test and analysis techniques in the flight dynamics and handling qualities area are described. These techniques were utilized at NASA Ames-Dryden during the initial flight envelope clearance of the X-29A aircraft. It is shown that the open-loop frequency response of an aircraft with highly relaxed static stability can be successfully computed on the ground from telemetry data. Postflight closed-loop frequency response data were obtained from pilot-generated frequency sweeps and it is found that the current handling quality requirements for high-maneuverability aircraft are generally applicable to the X-29A.

  10. Transportation and handling loads

    NASA Technical Reports Server (NTRS)

    Ostrem, F. E.

    1971-01-01

    Criteria and recommended practices are presented for the prediction and verification of transportation and handling loads for the space vehicle structure and for monitoring these loads during transportation and handling of the vehicle or major vehicle segments. Elements of the transportation and handling systems, and the forcing functions and associated loads are described. The forcing functions for common carriers and typical handling devices are assessed, and emphasis is given to the assessment of loads at the points where the space vehicle is supported during transportation and handling. Factors which must be considered when predicting the loads include the transportation and handling medium; type of handling fixture; transport vehicle speed; types of terrain; weather (changes in pressure of temperature, wind, etc.); and dynamics of the transportation modes or handling devices (acceleration, deceleration, and rotations of the transporter or handling device).

  11. Piloted simulator investigation of helicopter control systems effects on handling qualities during instrument flight

    NASA Technical Reports Server (NTRS)

    Forrest, R. D.; Chen, R. T. N.; Gerdes, R. M.; Alderete, T. S.; Gee, D. R.

    1979-01-01

    An exploratory piloted simulation was conducted to investigate the effects of the characteristics of helicopter flight control systems on instrument flight handling qualities. This joint FAA/NASA study was motivated by the need to improve instrument flight capability. A near-term objective is to assist in updating the airworthiness criteria for helicopter instrument flight. The experiment consisted of variations of single-rotor helicopter types and levels of stability and control augmentation systems (SCAS). These configurations were evaluated during an omnirange approach task under visual and instrument flight conditions. The levels of SCAS design included a simple rate damping system, collective decoupling plus rate damping, and an attitude command system with collective decoupling. A limited evaluation of stick force versus airspeed stability was accomplished. Some problems were experienced with control system mechanization which had a detrimental effect on longitudinal stability. Pilot ratings, pilot commentary, and performance data related to the task are presented.

  12. Handling Qualities Specifications for U.S. Military Helicopters

    NASA Technical Reports Server (NTRS)

    Key, David L.

    1982-01-01

    Inadequacies in the military specification for helicopter handling qualities, MIL-H-8501A, have long been recognized, and the latest procurements by the U.S. Army used special Prime Item Development Specifications (PIDS). This paper assesses the efficacy of these PIDS and suggests that changes should be made. In particular, the structure developed in MIL-F-8785B (ASG) (the specification for flying qualities of piloted airplanes) should be incorporated. Improved requirements must be based on a systematic data base and concentrated on topics most important in preliminary design: static and dynamic stability, control power and sensitivity, and interaction with controllers and displays. Emphasis should be on current military helicopter missions and helicopter idiosyncrasies such as cross-coupling, nonlinearities, and higher-order dynamics.

  13. 76 FR 7096 - Minimum Quality and Handling Standards for Domestic and Imported Peanuts Marketed in the United...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-02-09

    ...). Accordingly, AMS published a notice of review and request for written comments on the Standards in the April...; FV10-996-610 Review] Minimum Quality and Handling Standards for Domestic and Imported Peanuts Marketed... the Minimum Quality and Handling Standards for Domestic and Imported Peanuts Marketed in the United...

  14. 77 FR 30280 - Final National Recommended Ambient Water Quality Criteria for Carbaryl-2012

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-05-22

    ... national recommended water quality criteria for the protection of aquatic life from effects of carbaryl... developed the aquatic life criteria based on EPA's Guidelines for Deriving Numerical National Water Quality... quality standards for protecting aquatic life and human health. These criteria are intended to protect...

  15. An Investigation of Large Tilt-Rotor Short-Term Attitude Response Handling Qualities Requirements in Hover

    NASA Technical Reports Server (NTRS)

    Malcipa, Carlos; Decker, William A.; Theodore, Colin R.; Blanken, Christopher L.; Berger, Tom

    2010-01-01

    A piloted simulation investigation was conducted using the NASA Ames Vertical Motion Simulator to study the impact of pitch, roll and yaw attitude bandwidth and phase delay on handling qualities of large tilt-rotor aircraft. Multiple bandwidth and phase delay pairs were investigated for each axis. The simulation also investigated the effect that the pilot offset from the center of gravity has on handling qualities. While pilot offset does not change the dynamics of the vehicle, it does affect the proprioceptive and visual cues and it can have an impact on handling qualities. The experiment concentrated on two primary evaluation tasks: a precision hover task and a simple hover pedal turn. Six pilots flew over 1400 data runs with evaluation comments and objective performance data recorded. The paper will describe the experiment design and methodology, discuss the results of the experiment and summarize the findings.

  16. Investigation of the effects of bandwidth and time delay on helicopter roll-axis handling qualities

    NASA Technical Reports Server (NTRS)

    Pausder, Heinz-Juergen; Blanken, Chris L.

    1992-01-01

    Several years of cooperative research conducted under the U.S./German Memorandum of Understanding (MOU) in helicopter flight control has recently resulted in a successful handling qualities study. The focus of this cooperative research has been the effects on handling qualities due to time delays in combination with a high bandwidth vehicle. The jointly performed study included the use of U.S. ground-based simulation and German in-flight simulation facilities. The NASA-Ames Vertical Motion Simulator (VMS) was used to develop a high bandwidth slalom tracking task which took into consideration the constraints of the facilities. The VMS was also used to define a range of the test parameters and to perform initial handling qualities evaluations. The flight tests were conducted using DLR's variable-stability BO 105 S3 Advanced Technology Testing Helicopter System (ATTHeS). Configurations included a rate command and an attitude command response system with added time delays up to 160 milliseconds over the baseline and bandwidth values between 1.5 and 4.5 rad/sec. Sixty-six evaluations were performed in about 25 hr of flight time during 10 days of testing. The results indicate a need to more tightly constrain the allowable roll axis phase delay for the Level 1 and Level 2 requirements in the U.S. Army's specification for helicopter handling qualities, ADS-33C.

  17. Investigation of the effects of bandwidth and time delay on helicopter roll-axis handling qualities

    NASA Technical Reports Server (NTRS)

    Blanken, Chris L.; Pausder, Heinz-Jurgen

    1994-01-01

    Several years of cooperative research conducted under the U.S./German Memorandum of Understanding (MOU) in helicopter aeromechanics have recently resulted in a successful handling qualities study. The focus of this cooperative research has been the effect of time delays in a high bandwidth vehicle on handling qualities. The jointly performed study included the use of U.S. ground-based simulation and German in-flight simulation facilities. The NASA-Ames Vertical Motion Simulator (VMS) was used to develop a high bandwidth slalom tracking task which took into consideration the constraints of the facilities. The VMS was used to define a range of the test parameters and to perform initial handling qualities evaluations. The flight tests were conducted using DLR's variable-stability BO 105 S3 Advanced Technology Testing Helicopter System (ATTHeS). Configurations included a rate command and an attitude command response system with added time delays of up to 160 milliseconds over the baseline and band width values between 1.5 and 4.5 rad/sec. Sixty-six evaluations were performed in about 25 hours of flight time during ten days of testing. The results indicate a need to more tightly constrain the allowable roll axis phase delay for the Level 1 and Level 2 requirements in the U.S. Army's specification for helicopter handling qualities Aeronautical Design Standard (ADS)-33C.

  18. Investigation of the effects of bandwidth and time delay on helicopter roll-axis handling qualities

    NASA Technical Reports Server (NTRS)

    Pausder, Heinz-Juergen; Blanken, Chris L.

    1993-01-01

    Several years of cooperative research conducted under the U.S./German Memorandum of Understanding (MOU) in helicopter flight control has recently resulted in a successful handling qualities study. The focus of this cooperative research has been the effects on handling qualities due to time delays in combination with a high bandwidth vehicle. The jointly performed study included the use of U.S. ground-based simulation and German in-flight simulation facilities. The NASA-Ames Vertical Motion Simulator (VMS) was used to develop a high bandwidth slalom tracking task which took into consideration the constraints of the facilities. The VMS was also used to define a range of the test parameters and to perform initial handling qualities evaluations. The flight tests were conducted using DLR's variable-stability BO 105 S3 Advanced Technology Testing Helicopter System (ATTHeS). Configurations included a rate command and an attitude command response system with added time delays up to 160 milliseconds over the baseline and bandwidth values between 1.5 and 4.5 rad/sec. Sixty-six evaluations were performed in about 25 hours of flight time during ten days of testing. The results indicate a need to more tightly constrain the allowable roll axis phase delay for the Level 1 and Level 2 requirements in the U.S. Army's specification for helicopter handling qualities, ADS-33C.

  19. Handling Qualities of a Capsule Spacecraft During Atmospheric Entry

    NASA Technical Reports Server (NTRS)

    Bilimoria, Karl D.; Mueller, Eric R.

    2010-01-01

    A piloted simulation was conducted to study handling qualities for capsule spacecraft entering the Earth s atmosphere. Eight evaluation pilots, including six pilot astronauts, provided Cooper-Harper ratings, workload ratings, and qualitative comments. The simulation began after descending through the atmospheric entry interface point and continued until the drogue parachutes deployed. There were two categories of piloting tasks, both of which required bank angle control. In one task category, the pilot followed a closed-loop bank angle command computed by the backup guidance system to manage g-loads during entry. In the other task category, the pilot used intuitive rules to determine the desired bank angle independently, based on an open-loop schedule of vertical speed, Mach, and total energy specified at several range-to-target gates along the entry trajectory. Pilots were able to accurately track the bank angle guidance commands and steered the capsule toward the recovery site with essentially the same range error as the benchmark autopilot trajectory albeit with substantially higher propellant usage, and the handling qualities for this task were satisfactory. Another key result was that the complex piloting task of atmospheric entry could be performed satisfactorily, even in the presence of large dispersions, by controlling bank angle to follow a simple open-loop schedule.

  20. Riding and handling qualities of light aircraft: A review and analysis

    NASA Technical Reports Server (NTRS)

    Smetana, F. O.; Summery, D. C.; Johnson, W. D.

    1972-01-01

    Design procedures and supporting data necessary for configuring light aircraft to obtain desired responses to pilot commands and gusts are presented. The procedures employ specializations of modern military and jet transport practice where these provide an improvement over earlier practice. General criteria for riding and handling qualities are discussed in terms of the airframe dynamics. Methods available in the literature for calculating the coefficients required for a linearized analysis of the airframe dynamics are reviewed in detail. The review also treats the relation of spin and stall to airframe geometry. Root locus analysis is used to indicate the sensitivity of airframe dynamics to variations in individual stability derivatives and to variations in geometric parameters. Computer programs are given for finding the frequencies, damping ratios, and time constants of all rigid body modes and for generating time histories of aircraft motions in response to control inputs. Appendices are included presenting the derivation of the linearized equations of motion; the stability derivatives; the transfer functions; approximate solutions for the frequency, damping ratio, and time constants; an indication of methods to be used when linear analysis is inadequate; sample calculations; and an explanation of the use of root locus diagrams and Bode plots.

  1. 78 FR 52192 - Final Aquatic Life Ambient Water Quality Criteria For Ammonia-Freshwater 2013

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-08-22

    ... ambient water quality criteria for the protection of aquatic life from effects of ammonia in freshwater... life criteria are developed based on EPA's Guidelines for Deriving Numerical National Water Quality... quality standards for protecting aquatic life and human health. EPA's recommended water quality criteria...

  2. Unified Theory for Aircraft Handling Qualities and Adverse Aircraft-Pilot Coupling

    NASA Technical Reports Server (NTRS)

    Hess, R. A.

    1997-01-01

    A unified theory for aircraft handling qualities and adverse aircraft-pilot coupling or pilot-induced oscillations is introduced. The theory is based on a structural model of the human pilot. A methodology is presented for the prediction of (1) handling qualities levels; (2) pilot-induced oscillation rating levels; and (3) a frequency range in which pilot-induced oscillations are likely to occur. Although the dynamics of the force-feel system of the cockpit inceptor is included, the methodology will not account for effects attributable to control sensitivity and is limited to single-axis tasks and, at present, to linear vehicle models. The theory is derived from the feedback topology of the structural model and an examination of flight test results for 32 aircraft configurations simulated by the U.S. Air Force/CALSPAN NT-33A and Total In-Flight Simulator variable stability aircraft. An extension to nonlinear vehicle dynamics such as that encountered with actuator saturation is discussed.

  3. Handling Qualities of Model Reference Adaptive Controllers with Varying Complexity for Pitch-Roll Coupled Failures

    NASA Technical Reports Server (NTRS)

    Schaefer, Jacob; Hanson, Curt; Johnson, Marcus A.; Nguyen, Nhan

    2011-01-01

    Three model reference adaptive controllers (MRAC) with varying levels of complexity were evaluated on a high performance jet aircraft and compared along with a baseline nonlinear dynamic inversion controller. The handling qualities and performance of the controllers were examined during failure conditions that induce coupling between the pitch and roll axes. Results from flight tests showed with a roll to pitch input coupling failure, the handling qualities went from Level 2 with the baseline controller to Level 1 with the most complex MRAC tested. A failure scenario with the left stabilator frozen also showed improvement with the MRAC. Improvement in performance and handling qualities was generally seen as complexity was incrementally added; however, added complexity usually corresponds to increased verification and validation effort required for certification. The tradeoff between complexity and performance is thus important to a controls system designer when implementing an adaptive controller on an aircraft. This paper investigates this relation through flight testing of several controllers of vary complexity.

  4. Ride qualities criteria validation/pilot performance study: Flight test results

    NASA Technical Reports Server (NTRS)

    Nardi, L. U.; Kawana, H. Y.; Greek, D. C.

    1979-01-01

    Pilot performance during a terrain following flight was studied for ride quality criteria validation. Data from manual and automatic terrain following operations conducted during low level penetrations were analyzed to determine the effect of ride qualities on crew performance. The conditions analyzed included varying levels of turbulence, terrain roughness, and mission duration with a ride smoothing system on and off. Limited validation of the B-1 ride quality criteria and some of the first order interactions between ride qualities and pilot/vehicle performance are highlighted. An earlier B-1 flight simulation program correlated well with the flight test results.

  5. AIR QUALITY CRITERIA FOR LEAD (SECOND EXTERNAL REVIEW DRAFT)

    EPA Science Inventory

    The Clean Air Act mandates periodic review of the National Ambient Air Quality Standards (NAAQS) for six common air pollutants, also referred to as criteria pollutants, including lead. Under the review process, EPA's Office of Research and Development develops a criteria docu...

  6. Multiple Criteria Evaluation of Quality and Optimisation of e-Learning System Components

    ERIC Educational Resources Information Center

    Kurilovas, Eugenijus; Dagiene, Valentina

    2010-01-01

    The main research object of the paper is investigation and proposal of the comprehensive Learning Object Repositories (LORs) quality evaluation tool suitable for their multiple criteria decision analysis, evaluation and optimisation. Both LORs "internal quality" and "quality in use" evaluation (decision making) criteria are analysed in the paper.…

  7. Human Variome Project Quality Assessment Criteria for Variation Databases.

    PubMed

    Vihinen, Mauno; Hancock, John M; Maglott, Donna R; Landrum, Melissa J; Schaafsma, Gerard C P; Taschner, Peter

    2016-06-01

    Numerous databases containing information about DNA, RNA, and protein variations are available. Gene-specific variant databases (locus-specific variation databases, LSDBs) are typically curated and maintained for single genes or groups of genes for a certain disease(s). These databases are widely considered as the most reliable information source for a particular gene/protein/disease, but it should also be made clear they may have widely varying contents, infrastructure, and quality. Quality is very important to evaluate because these databases may affect health decision-making, research, and clinical practice. The Human Variome Project (HVP) established a Working Group for Variant Database Quality Assessment. The basic principle was to develop a simple system that nevertheless provides a good overview of the quality of a database. The HVP quality evaluation criteria that resulted are divided into four main components: data quality, technical quality, accessibility, and timeliness. This report elaborates on the developed quality criteria and how implementation of the quality scheme can be achieved. Examples are provided for the current status of the quality items in two different databases, BTKbase, an LSDB, and ClinVar, a central archive of submissions about variants and their clinical significance. © 2016 WILEY PERIODICALS, INC.

  8. Modeling procedures for handling qualities evaluation of flexible aircraft

    NASA Technical Reports Server (NTRS)

    Govindaraj, K. S.; Eulrich, B. J.; Chalk, C. R.

    1981-01-01

    This paper presents simplified modeling procedures to evaluate the impact of flexible modes and the unsteady aerodynamic effects on the handling qualities of Supersonic Cruise Aircraft (SCR). The modeling procedures involve obtaining reduced order transfer function models of SCR vehicles, including the important flexible mode responses and unsteady aerodynamic effects, and conversion of the transfer function models to time domain equations for use in simulations. The use of the modeling procedures is illustrated by a simple example.

  9. Internet Interventions for Long-Term Conditions: Patient and Caregiver Quality Criteria

    PubMed Central

    Murray, Elizabeth; Stevenson, Fiona; Gore, Charles; Nazareth, Irwin

    2006-01-01

    Background Interactive health communication applications (IHCAs) that combine high-quality health information with interactive components, such as self-assessment tools, behavior change support, peer support, or decision support, are likely to benefit people with long-term conditions. IHCAs are now largely Web-based and are becoming known as "Internet interventions." Although there are numerous professionally generated criteria to assess health-related websites, to date there has been scant exploration of patient-generated assessment criteria even though patients and professionals use different criteria for assessing the quality of traditional sources of health information. Objective We aimed to determine patients' and caregivers' requirements of IHCAs for long-term conditions as well as their criteria for assessing the quality of different programs. Methods This was a qualitative study with focus groups. Patients and caregivers managing long-term conditions used three (predominantly Web-based) IHCAs relevant to their condition and subsequently discussed the strengths and weaknesses of the different IHCAs in focus groups. Participants in any one focus group all shared the same long-term condition and viewed the same three IHCAs. Patient and caregiver criteria for IHCAs emerged from the data. Results There were 40 patients and caregivers who participated in 10 focus groups. Participants welcomed the potential of Internet interventions but felt that many were not achieving their full potential. Participants generated detailed and specific quality criteria relating to information content, presentation, interactivity, and trustworthiness, which can be used by developers and purchasers of Internet interventions. Conclusions The user-generated quality criteria reported in this paper should help developers and purchasers provide Internet interventions that better meet user needs. PMID:16954123

  10. Air Quality Criteria for Particulate Matter (Final Report, 2004)

    EPA Science Inventory

    EPA has completed the process of updating and revising, where appropriate, its Air Quality Criteria for Particulate Matter (PM) as issued in 1996 (usually referred to as the Criteria Document). Sections 108 and 109 of the Clean Air Act require that EPA carry out a periodic revi...

  11. Development and perceived effects of an educational programme on quality and safety in medication handling in residential facilities.

    PubMed

    Mygind, Anna; El-Souri, Mira; Rossing, Charlotte; Thomsen, Linda Aagaard

    2018-04-01

    To develop and test an educational programme on quality and safety in medication handling for staff in residential facilities for the disabled. The continuing pharmacy education instructional design model was used to develop the programme with 22 learning objectives on disease and medicines, quality and safety, communication and coordination. The programme was a flexible, modular seven + two days' course addressing quality and safety in medication handling, disease and medicines, and medication supervision and reconciliation. The programme was tested in five Danish municipalities. Municipalities were selected based on their application for participation; each independently selected a facility for residents with mental and intellectual disabilities, and a facility for residents with severe mental illnesses. Perceived effects were measured based on a questionnaire completed by participants before and after the programme. Effects on motivation and confidence as well as perceived effects on knowledge, skills and competences related to medication handling, patient empowerment, communication, role clarification and safety culture were analysed conducting bivariate, stratified analyses and test for independence. Of the 114 participants completing the programme, 75 participants returned both questionnaires (response rate = 66%). Motivation and confidence regarding quality and safety in medication handling significantly improved, as did perceived knowledge, skills and competences on 20 learning objectives on role clarification, safety culture, medication handling, patient empowerment and communication. The programme improved staffs' motivation and confidence and their perceived ability to handle residents' medication safely through improved role clarification, safety culture, medication handling and patient empowerment and communication skills. © 2017 Royal Pharmaceutical Society.

  12. A flight investigation of the stability, control, and handling qualities of an augmented jet flap STOL airplane

    NASA Technical Reports Server (NTRS)

    Vomaske, R. F.; Innis, R. C.; Swan, B. E.; Grossmith, S. W.

    1978-01-01

    The stability, control, and handling qualities of an augmented jet flap STOL airplane are presented. The airplane is an extensively modified de Havilland Buffalo military transport. The modified airplane has two fan-jet engines which provide vectorable thrust and compressed air for the augmentor jet flap and Boundary-Layer Control (BLC). The augmentor and BLC air is cross ducted to minimize asymmetric moments produced when one engine is inoperative. The modifications incorporated in the airplane include a Stability Augmentation System (SAS), a powered elevator, and a powered lateral control system. The test gross weight of the airplane was between 165,000 and 209,000 N (37,000 and 47,000 lb). Stability, control, and handling qualities are presented for the airspeed range of 40 to 180 knots. The lateral-directional handling qualities are considered satisfactory for the normal operating range of 65 to 160 knots airspeed when the SAS is functioning. With the SAS inoperative, poor turn coordination and spiral instability are primary deficiencies contributing to marginal handling qualities in the landing approach. The powered elevator control system enhanced the controllability in pitch, particularly in the landing flare and stall recovery.

  13. Analysis of flexible aircraft longitudinal dynamics and handling qualities. Volume 1: Analysis methods

    NASA Technical Reports Server (NTRS)

    Waszak, M. R.; Schmidt, D. S.

    1985-01-01

    As aircraft become larger and lighter due to design requirements for increased payload and improved fuel efficiency, they will also become more flexible. For highly flexible vehicles, the handling qualities may not be accurately predicted by conventional methods. This study applies two analysis methods to a family of flexible aircraft in order to investigate how and when structural (especially dynamic aeroelastic) effects affect the dynamic characteristics of aircraft. The first type of analysis is an open loop model analysis technique. This method considers the effects of modal residue magnitudes on determining vehicle handling qualities. The second method is a pilot in the loop analysis procedure that considers several closed loop system characteristics. Volume 1 consists of the development and application of the two analysis methods described above.

  14. Approach to developing numeric water quality criteria for ...

    EPA Pesticide Factsheets

    Human activities on land increase nutrient loads to coastal waters, which can increase phytoplankton production and biomass and potentially cause harmful ecological effects. States can adopt numeric water quality criteria into their water quality standards to protect the designated uses of their coastal waters from eutrophication impacts. The first objective of this study was to provide an approach for developing numeric water quality criteria for coastal waters based on archived SeaWiFS ocean color satellite data. The second objective was to develop an approach for transferring water quality criteria assessments to newer ocean color satellites such as MODIS and MERIS. Spatial and temporal measures of SeaWiFS, MODIS, and MERIS chlorophyll-a (ChlRS-a, mg m-3) were resolved across Florida’s coastal waters between 1998 and 2009. Annual geometric means of SeaWiFS ChlRS-a were evaluated to determine a quantitative reference baseline from the 90th percentile of the annual geometric means. A method for transferring to multiple ocean color sensors was implemented with SeaWiFS as the reference instrument. The ChlRS-a annual geometric means for each coastal segment from MODIS and MERIS were regressed against SeaWiFS to provide a similar response among all three satellites. Standardization factors for each coastal segment were calculated based on differences between 90th percentiles from SeaWiFS to MODIS and SeaWiFS to MERIS. This transfer approach allowed for futu

  15. Improved Lunar Lander Handling Qualities Through Control Response Type and Display Enhancements

    NASA Technical Reports Server (NTRS)

    Mueller, Eric Richard; Bilimoria, Karl D.; Frost, Chad Ritchie

    2010-01-01

    A piloted simulation that studied the handling qualities for a precision lunar landing task from final approach to touchdown is presented. A vehicle model based on NASA's Altair Lunar Lander was used to explore the design space around the nominal vehicle configuration to determine which combination of factors provides satisfactory pilot-vehicle performance and workload; details of the control and propulsion systems not available for that vehicle were derived from Apollo Lunar Module data. The experiment was conducted on a large motion base simulator. Eight Space Shuttle and Apollo pilot astronauts and three NASA test pilots served as evaluation pilots, providing Cooper-Harper ratings, Task Load Index ratings and qualitative comments. Each pilot flew seven combinations of control response types and three sets of displays, including two varieties of guidance and a nonguided approach. The response types included Rate Command with Attitude Hold, which was used in the original Apollo Moon landings, a Velocity Increment Command response type designed for up-and-away flight, three response types designed specifically for the vertical descent portion of the trajectory, and combinations of these. It was found that Velocity Increment Command significantly improved handling qualities when compared with the baseline Apollo design, receiving predominantly Level 1 ratings. This response type could be flown with or without explicit guidance cues, something that was very difficult with the baseline design, and resulted in approximately equivalent touchdown accuracies and propellant burn as the baseline response type. The response types designed to be used exclusively in the vertical descent portion of the trajectory did not improve handling qualities.

  16. Flying qualities design criteria applicable to supersonic cruise aircraft

    NASA Technical Reports Server (NTRS)

    Chalk, C. R.

    1980-01-01

    A comprehensive set of flying qualities design criteria was prepared for use in the supersonic cruise research program. The framework for stating the design criteria is established and design criteria are included which address specific failures, approach to dangerous flight conditions, flight at high angle of attack, longitudinal and lateral directional stability and control, the primary flight control system, and secondary flight controls. Examples are given of lateral directional design criteria limiting lateral accelerations at the cockpit, time to roll through 30 deg of bank, and time delay in the pilot's command path. Flight test data from the Concorde certification program are used to substantiate a number of the proposed design criteria.

  17. Dairy cow handling facilities and the perception of Beef Quality Assurance on Colorado dairies.

    PubMed

    Adams, A E; Olea-Popelka, F J; Grandin, T; Woerner, D R; Roman-Muniz, I N

    2014-02-01

    A survey was conducted on Colorado dairies to assess attitudes and practices regarding Dairy Beef Quality Assurance (DBQA). The objectives were to (1) assess the need for a new handling facility that would allow all injections to be administered via DBQA standards; (2) establish if Colorado dairy producers are concerned with DBQA; and (3) assess differences in responses between dairy owners and herdsmen. Of the 95 dairies contacted, 20 (21%) agreed to participate, with a median herd size of 1,178. When asked to rank the following 7 traits--efficiency, animal safety, human safety, ease of animal handling, ease of operation, inject per Beef Quality Assurance (BQA) procedures, and cost--in order of priority when designing a new handling facility, human and animal safety were ranked highest in priority (first or second) by the majority of participants, with ease of animal handling and efficiency ranked next. Interestingly, the administration of injections per BQA standards was ranked sixth or seventh by most participants. Respondents estimated the average annual income from the sale of cull cows to be 4.6% of all dairy income, with 50% receiving at least one carcass discount or condemnation in the past 12 mo. Although almost all of the participating dairy farmers stated that the preferred injection site for medications was the neck region, a significant number admitted to using alternate injection sites. In contrast, no difference was found between responses regarding the preferred and actual location for intravenous injections. Although most participating producers are aware of BQA injection guidelines, they perceive efficiency as more important, which could result in injections being administered in locations not promoted by BQA. Dairy owners and herdsmen disagreed in whether or not workers had been injured in the animal handling area in the last 12 mo. Handling facilities that allow for an efficient and safe way to administer drugs according to BQA guidelines and

  18. Effects of cockpit lateral stick characteristics on handling qualities and pilot dynamics

    NASA Technical Reports Server (NTRS)

    Mitchell, David G.; Aponso, Bimal L.; Klyde, David H.

    1992-01-01

    This report presents the results of analysis of cockpit lateral control feel-system studies. Variations in feel-system natural frequency, damping, and command sensing reference (force and position) were investigated, in combination with variations in the aircraft response characteristics. The primary data for the report were obtained from a flight investigation conducted with a variable-stability airplane, with additional information taken from other flight experiments and ground-based simulations for both airplanes and helicopters . The study consisted of analysis of handling qualities ratings and extraction of open-loop, pilot-vehicle describing functions from sum-of-sines tracking data, including, for a limited subset of these data, the development of pilot models. The study confirms the findings of other investigators that the effects on pilot opinion of cockpit feel-system dynamics are not equivalent to a comparable level of added time delay, and until a more comprehensive set of criteria are developed, it is recommended that feel-system dynamics be considered a delay-inducing element in the aircraft response. The best correlation with time-delay requirements was found when the feel-system dynamics were included in the delay measurements, regardless of the command reference. This is a radical departure from past approaches.

  19. Evaluation of High-Angle-of-Attack Handling Qualities for the X-31A Using Standard Evaluation Maneuvers

    NASA Technical Reports Server (NTRS)

    Stoliker, Patrick C.; Bosworth, John T.

    1996-01-01

    The X-31A aircraft gross-acquisition and fine-tracking handling qualities have been evaluated using standard evaluation maneuvers developed by Wright Laboratory, Wright-Patterson Air Force Base. The emphasis of the testing is in the angle-of-attack range between 30 deg and 70 deg. Longitudinal gross-acquisition handling qualities results show borderline Level 1/Level 2 performance. Lateral gross-acquisition testing results in Level 1/Level 2 ratings below 45 deg angle of attack, degrading into Level 3 as angle of attack increases. The fine-tracking performance in both longitudinal and lateral axes also receives Level 1 ratings near 30 deg angle of attack, with the ratings tending towards Level 3 at angles of attack greater than 50 deg. These ratings do not match the expectations from the extensive close-in combat testing where the X-31A aircraft demonstrated fair to good handling qualities maneuvering for high angles of attack. This paper presents the results of the high-angle-of-attack handling qualities flight testing of the X-31A aircraft. Discussion of the preparation for the maneuvers, the pilot ratings, and selected pilot comments are included. Evaluation of the results is made in conjunction with existing Neal-Smith, bandwidth, Smith-Geddes, and military specifications.

  20. Evaluation of High-Angle-of-Attack Handling Qualities for the X-31A Using Standard Evaluation Maneuvers

    NASA Technical Reports Server (NTRS)

    Stoliker, Patrick C.; Bosworth, John T.

    1997-01-01

    The X-31A aircraft gross-acquisition and fine-tracking handling qualities have been evaluated using standard evaluation maneuvers developed by Wright Laboratory, Wright Patterson Air Force Base. The emphasis of the testing is in the angle-of-attack range between 30 deg. and 70 deg. Longitudinal gross-acquisition handling qualities results show borderline Level l/Level 2 performance. Lateral gross-acquisition testing results in Level l/Level 2 ratings below 45 deg. angle of attack, degrading into Level 3 as angle of attack increases. The fine tracking performance in both longitudinal and lateral axes also receives Level 1 ratings near 30 deg. angle of attack, with the ratings tending towards Level 3 at angles of attack greater than 50 deg. These ratings do not match the expectations from the extensive close-in combat testing where the X-31A aircraft demonstrated fair to good handling qualities maneuvering for high angles of attack. This paper presents the results of the high-angle-of-attack handling qualities flight testing of the X-31A aircraft. Discussion of the preparation for the maneuvers, the pilot ratings, and selected pilot comments are included. Evaluation of the results is made in conjunction with existing Neal Smith, bandwidth, Smith-Geddes, and military specifications.

  1. Piloted Simulation Assessment of the Impact of Flexible Structures on Handling Qualities of Generic Supersonic Aircraft

    NASA Technical Reports Server (NTRS)

    Stringer, Mary T.; Cowen, Brandon; Hoffler, Keith D.; Couch, Jesse C.; Ogburn, Marilyn E.; Diebler, Corey G.

    2013-01-01

    The NASA Langley Research Center Cockpit Motion Facility (CMF) was used to conduct a piloted simulation assessment of the impact of flexible structures on flying qualities. The CMF was used because of its relatively high bandwidth, six degree-of-freedom motion capability. Previous studies assessed and attempted to mitigate the effects of multiple dynamic aeroservoelastic modes (DASE). Those results indicated problems existed, but the specific cause and effect was difficult to ascertain. The goal of this study was to identify specific DASE frequencies, damping ratios, and gains that cause degradation in handling qualities. A generic aircraft simulation was developed and designed to have Cooper-Harper Level 1 handling qualities when flown without DASE models. A test matrix of thirty-six DASE modes was implemented. The modes had frequencies ranging from 1 to 3.5 Hz and were applied to each axis independently. Each mode consisted of a single axis, frequency, damping, and gain, and was evaluated individually by six subject pilots with test pilot backgrounds. Analysis completed to date suggests that a number of the DASE models evaluated degrade the handling qualities of this class of aircraft to an uncontrollable condition.

  2. Water quality criteria for hexachloroethane: Final report

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Davidson, K.A.; Hovatter, P.S.; Ross, R.H.

    1988-03-01

    The available data regarding the environmental fate, aquatic toxicity, and mammalian toxicity of hexachloroethane, which is used in military screening smokes, were reviewed. The USEPA guidelines were used to generate water quality criteria for the protection of aquatic life and its uses and of human health. 16 tabs.

  3. Criteria for assessment of bridge aesthetic and visual quality

    NASA Astrophysics Data System (ADS)

    Rozentale, I.; Paeglitis, A.

    2017-10-01

    The bridge designers should find an ideal balance between structure, economy, buildability, aesthetics, durability and harmony with industrial or natural landscape. During the last years, the society has adopted documents providing procedures for evaluation of the impact of the structural appearance on surrounding landscape. The European Landscape Convention defines the landscape as an area perceived by people, whose character is the result of the action and interaction of natural and/or human factors. The Convention indicates the methods for clear and objective assessment of the landscape’s visual qualities. The esthetical qualities of bridge structures, appearance and attraction should satisfy not only the technicians - engineers and architects, but mostly the surrounding population. Each of these groups has a different perception of esthetical qualities of structure. Many authors have used different methods and criteria for assessment of bridge aesthetics. The aim of this paper is to provide an overview of the bridge aesthetic and visual quality assessment methods and criteria.

  4. [Criteria of quality of structure in rehabilitation units with inpatient treatment].

    PubMed

    Klein, K; Farin, E; Jäckel, W H; Blatt, O; Schliehe, F

    2004-04-01

    The structure of a rehabilitation unit is an important feature of the quality of care. Adequate and qualitatively good structures provide the basis for appropriate therapy offers and treatment and eventually, a better health for rehabilitants. The quality of structures is generally recorded without any evaluation of the aspects in particular. The definition of standards is the basis for such an evaluation. The project presented is aimed at the definition of relevant structural standards for rehab units with inpatient treatment for musculoskeletal, cardiac, neurological, gastroenterological, oncological, pneumological and dermatological diseases. Here, the distinction between basal criteria which have to be fulfilled by every rehab unit with inpatient treatment and criteria important for a well-aimed assignment of patients with specific needs ("assignment criteria") should be made. Apart from the documentation of structural attributes, the structural quality of a rehab unit can be described individually as well as in comparison with other units. Relevant structural criteria were defined in expert meetings by means of a modified Delphi-technique with five inquiries. Overall, 199 "basal criteria" and "assignment criteria" were defined. All criteria can be assigned to the two domains general structural characteristics (general characteristics and equipment of rooms; medical/technical equipment; therapy, education, care; staff) and process-related structures (conceptual frames; internal quality management; internal communication and personnel development). The structural standards are applicable to units for musculoskeletal, cardiac, neurological, oncological, gastroenterological, dermatological and pneumological rehabilitation financed by the two main providers of rehabilitation, the statutory pension insurance scheme and the statutory health insurance scheme for all other five indications. The definition of structural standards agreed by experts in a formal consensus

  5. Evaluation models and criteria of the quality of hospital websites: a systematic review study

    PubMed Central

    Jeddi, Fatemeh Rangraz; Gilasi, Hamidreza; Khademi, Sahar

    2017-01-01

    Introduction Hospital websites are important tools in establishing communication and exchanging information between patients and staff, and thus should enjoy an acceptable level of quality. The aim of this study was to identify proper models and criteria to evaluate the quality of hospital websites. Methods This research was a systematic review study. The international databases such as Science Direct, Google Scholar, PubMed, Proquest, Ovid, Elsevier, Springer, and EBSCO together with regional database such as Magiran, Scientific Information Database, Persian Journal Citation Report (PJCR) and IranMedex were searched. Suitable keywords including website, evaluation, and quality of website were used. Full text papers related to the research were included. The criteria and sub criteria of the evaluation of website quality were extracted and classified. Results To evaluate the quality of the websites, various models and criteria were presented. The WEB-Q-IM, Mile, Minerva, Seruni Luci, and Web-Qual models were the designed models. The criteria of accessibility, content and apparent features of the websites, the design procedure, the graphics applied in the website, and the page’s attractions have been mentioned in the majority of studies. Conclusion The criteria of accessibility, content, design method, security, and confidentiality of personal information are the essential criteria in the evaluation of all websites. It is suggested that the ease of use, graphics, attractiveness and other apparent properties of websites are considered as the user-friendliness sub criteria. Further, the criteria of speed and accessibility of the website should be considered as sub criterion of efficiency. When determining the evaluation criteria of the quality of websites, attention to major differences in the specific features of any website is essential. PMID:28465807

  6. Evaluation models and criteria of the quality of hospital websites: a systematic review study.

    PubMed

    Jeddi, Fatemeh Rangraz; Gilasi, Hamidreza; Khademi, Sahar

    2017-02-01

    Hospital websites are important tools in establishing communication and exchanging information between patients and staff, and thus should enjoy an acceptable level of quality. The aim of this study was to identify proper models and criteria to evaluate the quality of hospital websites. This research was a systematic review study. The international databases such as Science Direct, Google Scholar, PubMed, Proquest, Ovid, Elsevier, Springer, and EBSCO together with regional database such as Magiran, Scientific Information Database, Persian Journal Citation Report (PJCR) and IranMedex were searched. Suitable keywords including website, evaluation, and quality of website were used. Full text papers related to the research were included. The criteria and sub criteria of the evaluation of website quality were extracted and classified. To evaluate the quality of the websites, various models and criteria were presented. The WEB-Q-IM, Mile, Minerva, Seruni Luci, and Web-Qual models were the designed models. The criteria of accessibility, content and apparent features of the websites, the design procedure, the graphics applied in the website, and the page's attractions have been mentioned in the majority of studies. The criteria of accessibility, content, design method, security, and confidentiality of personal information are the essential criteria in the evaluation of all websites. It is suggested that the ease of use, graphics, attractiveness and other apparent properties of websites are considered as the user-friendliness sub criteria. Further, the criteria of speed and accessibility of the website should be considered as sub criterion of efficiency. When determining the evaluation criteria of the quality of websites, attention to major differences in the specific features of any website is essential.

  7. AN ECOEPIDEMIOLOGICAL APPROACH FOR DEVELOPING WATER QUALITY CRITERIA

    EPA Science Inventory

    The USEPA's Draft Framework for Developing Suspended and Bedded Sediments Water Quality Criteria is based on an ecoepidemiological approach that is potentially applicable to any chemical or non-chemical agent. An ecoepidemiological approach infers associations from the co-occurre...

  8. Air Quality Criteria for Lead (Final Report, 1986)

    EPA Science Inventory

    The Air Quality Criteria documents evaluate and assesse scientific information on the health and welfare effects associated with exposure to various concentrations of lead in ambient air. The literature through 1985 has been reviewed thoroughly for information relevant to air qua...

  9. The derivation of water quality criteria of copper in Biliu River

    NASA Astrophysics Data System (ADS)

    Zheng, Hongbo; Jia, Xinru

    2018-03-01

    Excessive copper in water can be detrimental to the health of human and aquatic life. China has promulgated Environmental Quality Standards for Surface Water to control water pollution, but uniform standard values may cause under-protection or over-protection. Therefore, the basic research work on water quality criteria of water source or reservoir is urgently needed. This study deduces the acute and chronic Water Quality Criteria (WQC) of copper in Biliu River by Species Sensitivity Distribution method (SSD). The result shows that BiDoseResp is the most suitable model and the acute and chronic water quality benchmark of copper are 10.72 µg•L-1 and 5.86 µg•L-1. This study provides basis for the construction of water quality standard of Liaoning and the environmental management of Biliu River.

  10. Air Quality Criteria for Ozone and Related Photochemical Oxidants Volume I of III (Final Report, 1996)

    EPA Science Inventory

    The U.S. Environmental Protection Agency (EPA) promulgates the National Ambient Air Quality Standards (NAAQS) on the basis of scientific information contained in air quality criteria documents. The previous ozone (O3) criteria document, Air Quality Criteria for Ozone and Other Ph...

  11. Maximizing the accuracy of field-derived numeric nutrient criteria in water quality regulations.

    PubMed

    McLaughlin, Douglas B

    2014-01-01

    High levels of the nutrients nitrogen and phosphorus can cause unhealthy biological or ecological conditions in surface waters and prevent the attainment of their designated uses. Regulatory agencies are developing numeric criteria for these nutrients in an effort to ensure that the surface waters in their jurisdictions remain healthy and productive, and that water quality standards are met. These criteria are often derived using field measurements that relate nutrient concentrations and other water quality conditions to expected biological responses such as undesirable growth or changes in aquatic plant and animal communities. Ideally, these numeric criteria can be used to accurately "diagnose" ecosystem health and guide management decisions. However, the degree to which numeric nutrient criteria are useful for decision making depends on how accurately they reflect the status or risk of nutrient-related biological impairments. Numeric criteria that have little predictive value are not likely to be useful for managing nutrient concerns. This paper presents information on the role of numeric nutrient criteria as biological health indicators, and the potential benefits of sufficiently accurate criteria for nutrient management. In addition, it describes approaches being proposed or adopted in states such as Florida and Maine to improve the accuracy of numeric criteria and criteria-based decisions. This includes a preference for developing site-specific criteria in cases where sufficient data are available, and the use of nutrient concentration and biological response criteria together in a framework to support designated use attainment decisions. Together with systematic planning during criteria development, the accuracy of field-derived numeric nutrient criteria can be assessed and maximized as a part of an overall effort to manage nutrient water quality concerns. © 2013 SETAC.

  12. An investigation of the effects of pitch-roll (de)-coupling on helicopter handling qualities

    NASA Technical Reports Server (NTRS)

    Ockier, C. J.; Pausder, H. J.; Blanken, C. L.

    1995-01-01

    An investigation of the effects of pitch-roll coupling on helicopter handling qualities was performed by the US Army and DLR, using a NASA ground-based and a DLR inflight simulator. Over 90 different coupling configurations were evaluated using a roll-axis tracking task. The results show that although the current ADS-33C coupling criterion discriminates against those types of coupling typical of conventionally controlled helicopters, it not always suited for the prediction of handling qualities of helicopters with modern control systems. Based on the observation that high frequency inputs during tracking are used to alleviate coupling, a frequency domain pitch-roll coupling criterion that uses the average coupling ratio between the bandwidth and neutral stability frequency is formulated. This criterion provides a more comprehensive coverage with respect to the different types of coupling and shows excellent consistency.

  13. Development and Validation of Quality Criteria for Providing Patient- and Family-centered Injury Care.

    PubMed

    Boyd, Jamie M; Burton, Rachael; Butler, Barb L; Dyer, Dianne; Evans, David C; Felteau, Melissa; Gruen, Russell L; Jaffe, Kenneth M; Kortbeek, John; Lang, Eddy; Lougheed, Val; Moore, Lynne; Narciso, Michelle; Oxland, Peter; Rivara, Frederick P; Roberts, Derek; Sarakbi, Diana; Vine, Karen; Stelfox, Henry T

    2017-08-01

    The aim of this study was to develop and evaluate the content validity of quality criteria for providing patient- and family-centered injury care. Quality criteria have been developed for clinical injury care, but not patient- and family-centered injury care. Using a modified Research AND Development Corporation (RAND)/University of California, Los Angeles (UCLA) Appropriateness Methodology, a panel of 16 patients, family members, injury and quality of care experts serially rated and revised criteria for patient- and family-centered injury care identified from patient and family focus groups. The criteria were then sent to 384 verified trauma centers in the United States, Canada, Australia, and New Zealand for evaluation. A total of 46 criteria were rated and revised by the panel over 4 rounds of review producing 14 criteria related to clinical care (n = 4; transitions of care, pain management, patient safety, provider competence), communication (n = 3; information for patients/families; communication of discharge plans to patients/families, communication between hospital and community providers), holistic care (n = 4; patient hygiene, kindness and respect, family access to patient, social and spiritual support) and end-of-life care (n = 3; decision making, end-of-life care, family follow-up). Medical directors, managers, or coordinators representing 254 trauma centers (66% response rate) rated 12 criteria to be important (95% of responses) for patient- and family-centered injury care. Fewer centers rated family access to the patient (80%) and family follow-up after patient death (65%) to be important criteria. Fourteen-candidate quality criteria for patient- and family-centered injury care were developed and shown to have content validity. These may be used to guide quality improvement practices.

  14. Development of flying qualities criteria for single pilot instrument flight operations

    NASA Technical Reports Server (NTRS)

    Bar-Gill, A.; Nixon, W. B.; Miller, G. E.

    1982-01-01

    Flying qualities criteria for Single Pilot Instrument Flight Rule (SPIFR) operations were investigated. The ARA aircraft was modified and adapted for SPIFR operations. Aircraft configurations to be flight-tested were chosen and matched on the ARA in-flight simulator, implementing modern control theory algorithms. Mission planning and experimental matrix design were completed. Microprocessor software for the onboard data acquisition system was debugged and flight-tested. Flight-path reconstruction procedure and the associated FORTRAN program were developed. Algorithms associated with the statistical analysis of flight test results and the SPIFR flying qualities criteria deduction are discussed.

  15. Criteria for Handling Qualities of Military Aircraft.

    DTIC Science & Technology

    1982-06-01

    loop precognitive manner. The pilot is able to apply discrete, step-like inputs which more or less exactly produce the desired aircraft response. Some...While closed loop operation depends upon the frequency domain response characteristics, successful precognitive control requires the time domain...represents the other extreme of the pilot task from the precognitive time response situation. Mich work was done in attempting to predict pilot opinion from

  16. Research across the disciplines: a road map for quality criteria in empirical ethics research.

    PubMed

    Mertz, Marcel; Inthorn, Julia; Renz, Günter; Rothenberger, Lillian Geza; Salloch, Sabine; Schildmann, Jan; Wöhlke, Sabine; Schicktanz, Silke

    2014-03-01

    Research in the field of Empirical Ethics (EE) uses a broad variety of empirical methodologies, such as surveys, interviews and observation, developed in disciplines such as sociology, anthropology, and psychology. Whereas these empirical disciplines see themselves as purely descriptive, EE also aims at normative reflection. Currently there is literature about the quality of empirical research in ethics, but little or no reflection on specific methodological aspects that must be considered when conducting interdisciplinary empirical ethics. Furthermore, poor methodology in an EE study results in misleading ethical analyses, evaluations or recommendations. This not only deprives the study of scientific and social value, but also risks ethical misjudgement. While empirical and normative-ethical research projects have quality criteria in their own right, we focus on the specific quality criteria for EE research. We develop a tentative list of quality criteria--a "road map"--tailored to interdisciplinary research in EE, to guide assessments of research quality. These quality criteria fall into the categories of primary research question, theoretical framework and methods, relevance, interdisciplinary research practice and research ethics and scientific ethos. EE research is an important and innovative development in bioethics. However, a lack of standards has led to concerns about and even rejection of EE by various scholars. Our suggested orientation list of criteria, presented in the form of reflective questions, cannot be considered definitive, but serves as a tool to provoke systematic reflection during the planning and composition of an EE research study. These criteria need to be tested in different EE research settings and further refined.

  17. Longitudinal flying qualities criteria for single-pilot instrument flight operations

    NASA Technical Reports Server (NTRS)

    Stengel, R. F.; Bar-Gill, A.

    1983-01-01

    Modern estimation and control theory, flight testing, and statistical analysis were used to deduce flying qualities criteria for General Aviation Single Pilot Instrument Flight Rule (SPIFR) operations. The principal concern is that unsatisfactory aircraft dynamic response combined with high navigation/communication workload can produce problems of safety and efficiency. To alleviate these problems. The relative importance of these factors must be determined. This objective was achieved by flying SPIFR tasks with different aircraft dynamic configurations and assessing the effects of such variations under these conditions. The experimental results yielded quantitative indicators of pilot's performance and workload, and for each of them, multivariate regression was applied to evaluate several candidate flying qualities criteria.

  18. 77 FR 20585 - Proposed Withdrawal of Certain Federal Water Quality Criteria Applicable to California, New...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-04-05

    ... proposing to amend the federal regulations to withdraw human health and aquatic life water quality criteria... to its surface water quality standards (New Jersey Administrative Code 7:9B), including aquatic life... pollutants covered in the 2002 and 2006 actions, New Jersey adopted water quality criteria for aquatic life...

  19. Modal control theory and application to aircraft lateral handling qualities design

    NASA Technical Reports Server (NTRS)

    Srinathkumar, S.

    1978-01-01

    A multivariable synthesis procedure based on eigenvalue/eigenvector assignment is reviewed and is employed to develop a systematic design procedure to meet the lateral handling qualities design objectives of a fighter aircraft over a wide range of flight conditions. The closed loop modal characterization developed provides significant insight into the design process and plays a pivotal role in the synthesis of robust feedback systems. The simplicity of the synthesis algorithm yields an efficient computer aided interactive design tool for flight control system synthesis.

  20. Landing flying qualities evaluation criteria for augmented aircraft

    NASA Technical Reports Server (NTRS)

    Radford, R. C.; Smith, R.; Bailey, R.

    1980-01-01

    The criteria evaluated were: Calspan Neal-Smith; Onstott (Northrop Time Domain); McDonnell-Douglas Equivalent System Approach; R. H. Smith Criterion. Each criterion was applied to the same set of longitudinal approach and landing flying qualities data. A revised version of the Neal-Smith criterion which is applicable to the landing task was developed and tested against other landing flying qualities data. Results indicated that both the revised Neal-Smith criterion and the Equivalent System Approach are good discriminators of pitch landing flying qualities; Neal-Smith has particular merit as a design guide, while the Equivalent System Approach is well suited for development of appropriate military specification requirements applicable to highly augmented aircraft.

  1. Water Quality Criteria for Human Health and Aquatic Life

    EPA Science Inventory

    Collaborative effort with the Office of Water to provide science in support of the development and implementation of new or revised ambient water quality criteria for microbial and chemical contaminants for human health and aquatic life. The research also addresses implementation...

  2. Innovative tools for quality assessment: integrated quality criteria for review of multiple study designs (ICROMS).

    PubMed

    Zingg, W; Castro-Sanchez, E; Secci, F V; Edwards, R; Drumright, L N; Sevdalis, N; Holmes, A H

    2016-04-01

    With the aim to facilitate a more comprehensive review process in public health including patient safety, we established a tool that we have termed ICROMS (Integrated quality Criteria for the Review Of Multiple Study designs), which unifies, integrates and refines current quality criteria for a large range of study designs including qualitative research. Review, pilot testing and expert consensus. The tool is the result of an iterative four phase process over two years: 1) gathering of established criteria for assessing controlled, non-controlled and qualitative study designs; 2) pilot testing of a first version in two systematic reviews on behavioural change in infection prevention and control and in antibiotic prescribing; 3) further refinement and adding of additional study designs in the context of the European Centre for Disease Prevention and Control funded project 'Systematic review and evidence-based guidance on organisation of hospital infection control programmes' (SIGHT); 4) scrutiny by the pan-European expert panel of the SIGHT project, which had the objective of ensuring robustness of the systematic review. ICROMS includes established quality criteria for randomised studies, controlled before-and-after studies and interrupted time series, and incorporates criteria for non-controlled before-and-after studies, cohort studies and qualitative studies. The tool consists of two parts: 1) a list of quality criteria specific for each study design, as well as criteria applicable across all study designs by using a scoring system; 2) a 'decision matrix', which specifies the robustness of the study by identifying minimum requirements according to the study type and the relevance of the study to the review question. The decision matrix directly determines inclusion or exclusion of a study in the review. ICROMS was applied to a series of systematic reviews to test its feasibility and usefulness in the appraisal of multiple study designs. The tool was applicable

  3. Effects of dynamic aeroelasticity on handling qualities and pilot rating

    NASA Technical Reports Server (NTRS)

    Swaim, R. L.; Yen, W.-Y.

    1978-01-01

    Pilot performance parameters, such as pilot ratings, tracking errors, and pilot comments, were recorded and analyzed for a longitudinal pitch tracking task on a large, flexible aircraft. The tracking task was programmed on a fixed-base simulator with a CRT attitude director display of pitch angle command, pitch angle, and pitch angle error. Parametric variations in the undamped natural frequencies of the two lowest frequency symmetric elastic modes were made to induce varying degrees of rigid body and elastic mode interaction. The results indicate that such mode interaction can drastically affect the handling qualities and pilot ratings of the task.

  4. Investigation of Control System and Display Variations on Spacecraft Handling Qualities for Docking with Stationary and Rotating Targets

    NASA Technical Reports Server (NTRS)

    Jackson, E. Bruce; Goodrich, Kenneth H.; Bailey, Randall E.; Barnes, James R.; Ragsdale, William A.; Neuhaus, Jason R.

    2010-01-01

    This paper documents the investigation into the manual docking of a preliminary version of the Crew Exploration Vehicle with stationary and rotating targets in Low Earth Orbit. The investigation was conducted at NASA Langley Research Center in the summer of 2008 in a repurposed fixed-base transport aircraft cockpit and involved nine evaluation astronauts and research pilots. The investigation quantified the benefits of a feed-forward reaction control system thruster mixing scheme to reduce translation-into-rotation coupling, despite unmodeled variations in individual thruster force levels and off-axis center of mass locations up to 12 inches. A reduced rate dead-band in the phase-plane attitude controller also showed some promise. Candidate predictive symbology overlaid on a docking ring centerline camera image did not improve handling qualities, but an innovative attitude status indicator symbol was beneficial. The investigation also showed high workload and handling quality problems when manual dockings were performed with a rotating target. These concerns indicate achieving satisfactory handling quality ratings with a vehicle configuration similar to the nominal Crew Exploration Vehicle may require additional automation.

  5. Do water quality criteria based on nonnative species provide appropriate protection for native species?

    PubMed

    Jin, Xiaowei; Wang, Zijian; Wang, Yeyao; Lv, Yibing; Rao, Kaifeng; Jin, Wei; Giesy, John P; Leung, Kenneth M Y

    2015-08-01

    The potential use of toxicity data for nonnative species to derive water quality criteria is controversial because it is sometimes questioned whether criteria based on species from one geographical region provide appropriate protection for species in a different region. However, this is an important concept for the development of Chinese water quality criteria or standards. Data were assembled on 38 chemicals for which values were available for both native and nonnative species. Sensitivities of these organisms were compared based on the 5% hazardous concentration values and the species sensitivity distribution from a literature review. Results of the present study's analysis showed that there is approximately 74% certainty that use of nonnative species to generate water quality criteria would be sufficiently protective of aquatic ecosystems in China. Without applying any assessment factor to the water quality criteria generated from nonnative species, the uncertainty would be 26% when the native Chinese species might be under protection. Applying an assessment factor of 10 would offer adequate protection to native Chinese species for approximately 90% of tested chemicals and thus reduce the uncertainty from 26% to 10%. © 2015 SETAC.

  6. Handling qualities of large flexible control-configured aircraft

    NASA Technical Reports Server (NTRS)

    Swaim, R. L.

    1980-01-01

    The effects on handling qualities of low frequency symmetric elastic mode interaction with the rigid body dynamics of a large flexible aircraft was analyzed by use of a mathematical pilot modeling computer simulation. An extension of the optimal control model for a human pilot was made so that the mode interaction effects on the pilot's control task could be assessed. Pilot ratings were determined for a longitudinal tracking task with parametric variations in the undamped natural frequencies of the two lowest frequency symmetric elastic modes made to induce varying amounts of mode interaction. Relating numerical performance index values associated with the frequency variations used in several dynamic cases, to a numerical Cooper-Harper pilot rating has proved successful in discriminating when the mathematical pilot can or cannot separate rigid from elastic response in the tracking task.

  7. Research across the disciplines: a road map for quality criteria in empirical ethics research

    PubMed Central

    2014-01-01

    Background Research in the field of Empirical Ethics (EE) uses a broad variety of empirical methodologies, such as surveys, interviews and observation, developed in disciplines such as sociology, anthropology, and psychology. Whereas these empirical disciplines see themselves as purely descriptive, EE also aims at normative reflection. Currently there is literature about the quality of empirical research in ethics, but little or no reflection on specific methodological aspects that must be considered when conducting interdisciplinary empirical ethics. Furthermore, poor methodology in an EE study results in misleading ethical analyses, evaluations or recommendations. This not only deprives the study of scientific and social value, but also risks ethical misjudgement. Discussion While empirical and normative-ethical research projects have quality criteria in their own right, we focus on the specific quality criteria for EE research. We develop a tentative list of quality criteria – a “road map” – tailored to interdisciplinary research in EE, to guide assessments of research quality. These quality criteria fall into the categories of primary research question, theoretical framework and methods, relevance, interdisciplinary research practice and research ethics and scientific ethos. Summary EE research is an important and innovative development in bioethics. However, a lack of standards has led to concerns about and even rejection of EE by various scholars. Our suggested orientation list of criteria, presented in the form of reflective questions, cannot be considered definitive, but serves as a tool to provoke systematic reflection during the planning and composition of an EE research study. These criteria need to be tested in different EE research settings and further refined. PMID:24580847

  8. Air Quality Criteria for Lead (First External Review Draft)

    EPA Science Inventory

    Background:

    The Clean Air Act mandates periodic review of the National Ambient Air Quality Standards (NAAQS) for six common air pollutants, also referred to as criteria pollutants, including lead. Under the review process, EPA's Office of Research and Development d...

  9. AIR QUALITY CRITERIA FOR PARTICULATE MATTER, VOLUMES I-III

    EPA Science Inventory

    There is no abstract available for these documents. If further information is requested, please refer to the bibliographic citation and contact the Technical Information Staff at the number listed below.

    • Air Quality Criteria for Particulate Matter, Volume I - EP...

    • Presentation of flight control design and handling quality commonality by separate surface stability augmentation for the family of commuter airplanes

      NASA Technical Reports Server (NTRS)

      Hensley, Douglas; Creighton, Thomas; Haddad, Raphael; Hendrich, Louis; Morgan, Louise; Russell, Mark; Swift, Gerald

      1987-01-01

      The methodology and results for a flight control design and implementation for common handling qualities by Separate Surface Stability Augmentation (SSSA) for the family of commuter airplanes are contained. The open and closed loop dynamics and the design results of augmenting for common handling qualities are presented. The physical and technology requirements are presented for implementing the SSSA system. The conclusion of this report and recommendations for changes or improvement are discussed.

    • Multi-Criteria Decision Making Approaches for Quality Control of Genome-Wide Association Studies

      PubMed Central

      Malovini, Alberto; Rognoni, Carla; Puca, Annibale; Bellazzi, Riccardo

      2009-01-01

      Experimental errors in the genotyping phases of a Genome-Wide Association Study (GWAS) can lead to false positive findings and to spurious associations. An appropriate quality control phase could minimize the effects of this kind of errors. Several filtering criteria can be used to perform quality control. Currently, no formal methods have been proposed for taking into account at the same time these criteria and the experimenter’s preferences. In this paper we propose two strategies for setting appropriate genotyping rate thresholds for GWAS quality control. These two approaches are based on the Multi-Criteria Decision Making theory. We have applied our method on a real dataset composed by 734 individuals affected by Arterial Hypertension (AH) and 486 nonagenarians without history of AH. The proposed strategies appear to deal with GWAS quality control in a sound way, as they lead to rationalize and make explicit the experimenter’s choices thus providing more reproducible results. PMID:21347174

    • Multi-criteria decision making approaches for quality control of genome-wide association studies.

      PubMed

      Malovini, Alberto; Rognoni, Carla; Puca, Annibale; Bellazzi, Riccardo

      2009-03-01

      Experimental errors in the genotyping phases of a Genome-Wide Association Study (GWAS) can lead to false positive findings and to spurious associations. An appropriate quality control phase could minimize the effects of this kind of errors. Several filtering criteria can be used to perform quality control. Currently, no formal methods have been proposed for taking into account at the same time these criteria and the experimenter's preferences. In this paper we propose two strategies for setting appropriate genotyping rate thresholds for GWAS quality control. These two approaches are based on the Multi-Criteria Decision Making theory. We have applied our method on a real dataset composed by 734 individuals affected by Arterial Hypertension (AH) and 486 nonagenarians without history of AH. The proposed strategies appear to deal with GWAS quality control in a sound way, as they lead to rationalize and make explicit the experimenter's choices thus providing more reproducible results.

    • Microbiological quality and safe handling of enteral diets in a hospital in Minas Gerais, Brazil.

      PubMed

      Pinto, Raquel Oliveira Medrado; Correia, Eliznara Fernades; Pereira, Keyla Carvalho; Costa Sobrinho, Paulo de Souza; da Silva, Daniele Ferreira

      2015-06-01

      Contamination of enteral diets represents a high risk of compromising the patient's medical condition. To assess the microbiological quality and aseptic conditions in the preparation and administration of handmade and industrialized enteral diets offered in a hospital in the Valley of Jequitinhonha, MG, Brazil, we performed a microbiological analysis of 50 samples of diets and 27 samples of surfaces, utensils, and water used in the preparation of the diets. In addition, we assessed the good handling practices of enteral diets according to the requirements specified by the Brazilian legislation. Both kinds of enteral diets showed contamination by coliforms and Pseudomonas spp. No sample was positive for Staphylococcus aureus and Salmonella spp. On the other hand, Listeria spp. was detected in only one sample of handmade diets. Contamination was significantly higher in the handmade preparations (p < 0.05). Nonconformities were detected with respect to good handling practices, which may compromise the diet safety. The results indicate that the sanitary quality of the enteral diets is unsatisfactory, especially handmade diets. Contamination by Pseudomonas spp. is significant because it is often involved in infection episodes. With regard to aseptic practices, it was observed the need of implementing new procedures for handling enteral diets.

    • Microbiological quality and safe handling of enteral diets in a hospital in Minas Gerais, Brazil

      PubMed Central

      Pinto, Raquel Oliveira Medrado; Correia, Eliznara Fernades; Pereira, Keyla Carvalho; Costa, Paulo de Souza; da Silva, Daniele Ferreira

      2015-01-01

      Contamination of enteral diets represents a high risk of compromising the patient's medical condition. To assess the microbiological quality and aseptic conditions in the preparation and administration of handmade and industrialized enteral diets offered in a hospital in the Valley of Jequitinhonha, MG, Brazil, we performed a microbiological analysis of 50 samples of diets and 27 samples of surfaces, utensils, and water used in the preparation of the diets. In addition, we assessed the good handling practices of enteral diets according to the requirements specified by the Brazilian legislation. Both kinds of enteral diets showed contamination by coliforms and Pseudomonas spp. No sample was positive for Staphylococcus aureus and Salmonella spp. On the other hand, Listeria spp. was detected in only one sample of handmade diets. Contamination was significantly higher in the handmade preparations (p < 0.05). Nonconformities were detected with respect to good handling practices, which may compromise the diet safety. The results indicate that the sanitary quality of the enteral diets is unsatisfactory, especially handmade diets. Contamination by Pseudomonas spp. is significant because it is often involved in infection episodes. With regard to aseptic practices, it was observed the need of implementing new procedures for handling enteral diets. PMID:26273278

    • Effect of winglets on performance and handling qualities of general aviation aircraft

      NASA Technical Reports Server (NTRS)

      Van Dam, C. P.; Holmes, B. J.; Pitts, C.

      1980-01-01

      Recent flight and wind tunnel evaluations of winglets mounted on general aviation airplanes have shown improvements in cruise fuel efficiency, and climbing and turning performance. Some of these analyses have also uncovered various effects of winglets on airplane handling qualities. Retrofitting an airplane with winglets can result in reduced cross wind take-off and landing capabilities. Also, winglets can have a detrimental effect on the lateral directional response characteristics of aircraft which have a moderate to high level of adverse yaw due to aileron. Introduction of an aileron-rudder-interconnect, and reduction of the effective dihedral by canting-in of the winglets, or addition of a lower winglet can eliminate these flying quality problems.

    • Probability-based estimates of site-specific copper water quality criteria for the Chesapeake Bay, USA.

      PubMed

      Arnold, W Ray; Warren-Hicks, William J

      2007-01-01

      The object of this study was to estimate site- and region-specific dissolved copper criteria for a large embayment, the Chesapeake Bay, USA. The intent is to show the utility of 2 copper saltwater quality site-specific criteria estimation models and associated region-specific criteria selection methods. The criteria estimation models and selection methods are simple, efficient, and cost-effective tools for resource managers. The methods are proposed as potential substitutes for the US Environmental Protection Agency's water effect ratio methods. Dissolved organic carbon data and the copper criteria models were used to produce probability-based estimates of site-specific copper saltwater quality criteria. Site- and date-specific criteria estimations were made for 88 sites (n = 5,296) in the Chesapeake Bay. The average and range of estimated site-specific chronic dissolved copper criteria for the Chesapeake Bay were 7.5 and 5.3 to 16.9 microg Cu/L. The average and range of estimated site-specific acute dissolved copper criteria for the Chesapeake Bay were 11.7 and 8.3 to 26.4 microg Cu/L. The results suggest that applicable national and state copper criteria can increase in much of the Chesapeake Bay and remain protective. Virginia Department of Environmental Quality copper criteria near the mouth of the Chesapeake Bay, however, need to decrease to protect species of equal or greater sensitivity to that of the marine mussel, Mytilus sp.

    • Structural dynamic model obtained from flight use with piloted simulation and handling qualities analysis

      NASA Technical Reports Server (NTRS)

      Powers, Bruce G.

      1996-01-01

      The ability to use flight data to determine an aircraft model with structural dynamic effects suitable for piloted simulation. and handling qualities analysis has been developed. This technique was demonstrated using SR-71 flight test data. For the SR-71 aircraft, the most significant structural response is the longitudinal first-bending mode. This mode was modeled as a second-order system, and the other higher order modes were modeled as a time delay. The distribution of the modal response at various fuselage locations was developed using a uniform beam solution, which can be calibrated using flight data. This approach was compared to the mode shape obtained from the ground vibration test, and the general form of the uniform beam solution was found to be a good representation of the mode shape in the areas of interest. To calibrate the solution, pitch-rate and normal-acceleration instrumentation is required for at least two locations. With the resulting structural model incorporated into the simulation, a good representation of the flight characteristics was provided for handling qualities analysis and piloted simulation.

    • An investigation of the effects of pitch-roll (de)coupling on helicopter handling qualities

      NASA Technical Reports Server (NTRS)

      Blanken, C. L.; Pausder, H. J.; Ockier, C. J.

      1995-01-01

      An extensive investigation of the effects of pitch-roll coupling on helicopter handling qualities was performed by the U.S. Army and Deutsche Forschungsanstalt fur Luft- und Raumfahrt (DLR), using a NASA ground-based and a DLR in-flight simulator. Over 90 different coupling configurations were evaluated using a high gain roll-axis tracking task. The results show that although the current ADS-33C coupling criterion discriminates against those types of coupling typical of conventionally controlled helicopters, it is not always suited for the prediction of handling qualities of helicopters with modern control systems. Based on the observation that high frequency inputs during tracking are used to alleviate coupling, a frequency domain pitch-roll coupling criterion that uses the average coupling ratio between the bandwidth and neutral stability frequency is formulated. This criterion provides a more comprehensive coverage with respect to the different types of coupling, shows excellent consistency, and has the additional benefit that compliance testing data are obtained from the bandwidth/phase delay tests, so that no additional flight testing is needed.

    • Interspecies Correlation Estimation - Applications in Water Quality Criteria and Ecological Risk Assessment

      EPA Science Inventory

      Water quality criteria (WQC) designate the maximum concentrations of water-borne toxicants that do not adversely affect specific protection goals under certain natural conditions. As the foundation of water quality standards, WQC provide a critical scientific basis for environmen...

    • Criteria for assessing the quality of mHealth apps: a systematic review.

      PubMed

      Nouri, Rasool; R Niakan Kalhori, Sharareh; Ghazisaeedi, Marjan; Marchand, Guillaume; Yasini, Mobin

      2018-05-16

      Review the existing studies including an assessment tool/method to assess the quality of mHealth apps; extract their criteria; and provide a classification of the collected criteria. In accordance with the PRISMA statement, a literature search was conducted in MEDLINE, EMBase, ISI and Scopus for English language citations published from January 1, 2008 to December 22, 2016 for studies including tools or methods for quality assessment of mHealth apps. Two researchers screened the titles and abstracts of all retrieved citations against the inclusion and exclusion criteria. The full text of relevant papers was then individually examined by the same researchers. A senior researcher resolved eventual disagreements and confirmed the relevance of all included papers. The authors, date of publication, subject fields of target mHealth apps, development method, and assessment criteria were extracted from each paper. The extracted assessment criteria were then reviewed, compared, and classified by an expert panel of two medical informatics specialists and two health information management specialists. Twenty-three papers were included in the review. Thirty-eight main classes of assessment criteria were identified. These were reorganized by expert panel into 7 main classes (Design, Information/Content, Usability, Functionality, Ethical Issues, Security and Privacy, and User-perceived value) with 37 sub-classes of criteria. There is a wide heterogeneity in assessment criteria for mHealth apps. It is necessary to define the exact meanings and degree of distinctness of each criterion. This will help to improve the existing tools and may lead to achieve a better comprehensive mHealth app assessment tool.

  1. The Implications of Handling Qualities in Civil Helicopter Accidents Involving Hover and Low Speed Flight

    NASA Technical Reports Server (NTRS)

    Dugan, Daniel C.; Delamer, Kevin J.

    2005-01-01

    Because of increasing accident rates in Army helicopters in hover and low speed flight, a study was made in 1999 of accidents which could be attributed to inadequate stability augmentation. A study of civil helicopter accidents from 1993-2004 was then undertaken to pursue the issue of poor handling qualities in helicopters which, in almost all cases, had no stability augmentation. The vast majority of the mishaps studied occurred during daylight in visual meteorological condition, reducing the impact of degraded visual environments (DVE) on the results. Based on the Cooper-Harper Rating Scale, the handling qualities of many of the helicopters studied could be described as having from "very objectionable" to "major" deficiencies. These costly deficiencies have resulted in unnecessary loss of life, injury, and high dollar damage. Low cost and lightweight augmentation systems for helicopters have been developed in the past and are still being investigated. They offer the potential for significant reductions in the accident rate.

  2. ASSESSING BIOACCUMULATION FOR DERIVING NATIONAL HUMAN HEALTH WATER QUALITY CRITERIA

    EPA Science Inventory

    The United States Environmental Protection Agency is revising its methodology for deriving national ambient water quality criteria (AWQC) to protect human health. A component of this guidance involves assessing the potential for chemical bioaccumulation in commonly consumed fish ...

  3. State-of-Science Approaches to Determine Sensitive Taxa for Water Quality Criteria Derivation

    EPA Science Inventory

    Current Ambient Water Quality Criteria (AWQC) guidelines specify pre-defined taxa diversity requirements, which has limited chemical-specific criteria development in the U.S. to less than 100 chemicals. A priori knowledge of sensitive taxa to toxicologically similar groups of che...

  4. Fact Sheet: Revised National Recommended Water Quality Criteria for the Protection of Human Health

    EPA Pesticide Factsheets

    2003 Revised National Recommended Ambient Water Quality Criteria for the Protection of Human Health. 15 Pollutants revised criteria will be published including, chlorobenzene, cyanide, endrin, ethylbenzene, lindane, thallium, toluene, and more.

  5. Archive data base and handling system for the Orbiter flying qualities experiment program

    NASA Technical Reports Server (NTRS)

    Myers, T. T.; Dimarco, R.; Magdaleno, R. E.; Aponso, B. L.

    1986-01-01

    The OFQ archives data base and handling system assembled as part of the Orbiter Flying Qualities (OFQ) research of the Orbiter Experiments Program (EOX) are described. The purpose of the OFQ archives is to preserve and document shuttle flight data relevant to vehicle dynamics, flight control, and flying qualities in a form that permits maximum use for qualified users. In their complete form, the OFQ archives contain descriptive text (general information about the flight, signal descriptions and units) as well as numerical time history data. Since the shuttle program is so complex, the official data base contains thousands of signals and very complex entries are required to obtain data. The OFQ archives are intended to provide flight phase oriented data subsets with relevant signals which are easily identified for flying qualities research.

  6. Air Quality Criteria for Ozone and Related Photochemical Oxidants (Second External Review Draft)

    EPA Science Inventory

    This second external review draft of the Air Quality Criteria for Ozone and Related Photochemical Oxidants, Volumes I-III (Ozone Criteria Document) is being released for public comment and for review by EPA's Clean Air Scientific Advisory Committee (CASAC) r...

  7. Criteria for Side-Force Control in Air-to-Ground Target Acquisition and Tracking

    NASA Technical Reports Server (NTRS)

    Sammonds, Robert I.; McNeill, Walter E.; Bunnell, John W.

    1982-01-01

    A moving-base simulator experiment conducted at Ames Research Center demonstrated that a wings-level-turn control mode improved flying qualities for air-to-ground weapons delivery compared with those of a conventional aircraft. Evaluations of criteria for dynamic response for this system have shown that pilot ratings correlate well with equivalent time constant of the initial response and with system bandwidth. Ranges of this time constant, as well as digital-system transport delays and lateral-acceleration control authorities that encompassed level 1 through level 3 handling qualities, were determined.

  8. Prediction of pilot opinion ratings using an optimal pilot model. [of aircraft handling qualities in multiaxis tasks

    NASA Technical Reports Server (NTRS)

    Hess, R. A.

    1977-01-01

    A brief review of some of the more pertinent applications of analytical pilot models to the prediction of aircraft handling qualities is undertaken. The relative ease with which multiloop piloting tasks can be modeled via the optimal control formulation makes the use of optimal pilot models particularly attractive for handling qualities research. To this end, a rating hypothesis is introduced which relates the numerical pilot opinion rating assigned to a particular vehicle and task to the numerical value of the index of performance resulting from an optimal pilot modeling procedure as applied to that vehicle and task. This hypothesis is tested using data from piloted simulations and is shown to be reasonable. An example concerning a helicopter landing approach is introduced to outline the predictive capability of the rating hypothesis in multiaxis piloting tasks.

  9. Dynamic stability and handling qualities tests on a highly augmented, statically unstable airplane

    NASA Technical Reports Server (NTRS)

    Gera, Joseph; Bosworth, John T.

    1987-01-01

    This paper describes some novel flight tests and analysis techniques in the flight dynamics and handling qualities area. These techniques were utilized during the initial flight envelope clearance of the X-29A aircraft and were largely responsible for the completion of the flight controls clearance program without any incidents or significant delays. The resulting open-loop and closed-loop frequency responses and the time history comparison using flight and linear simulation data are discussed.

  10. Air Quality Criteria for Ozone and Related Photochemical Oxidants (Final Report, 2006)

    EPA Science Inventory

    In February 2006, EPA released the final document, Air Quality Criteria for Ozone and Other Photochemical Oxidants. Tropospheric or surface-level ozone (O3) is one of six major air pollutants regulated by National Ambient Air Quality Standards (NAAQS) under the U.S...

  11. Air Quality Criteria for Ozone and Related Photochemical Oxidants (First External Review Draft)

    EPA Science Inventory

    This first external review draft of the Air Quality Criteria for Ozone and Related Photochemical Oxidants (Ozone Criteria Document) is being released in January 2005 for public comment and for review by EPA's Clean A...

  12. Criteria to Extract High-Quality Protein Data Bank Subsets for Structure Users.

    PubMed

    Carugo, Oliviero; Djinović-Carugo, Kristina

    2016-01-01

    It is often necessary to build subsets of the Protein Data Bank to extract structural trends and average values. For this purpose it is mandatory that the subsets are non-redundant and of high quality. The first problem can be solved relatively easily at the sequence level or at the structural level. The second, on the contrary, needs special attention. It is not sufficient, in fact, to consider the crystallographic resolution and other feature must be taken into account: the absence of strings of residues from the electron density maps and from the files deposited in the Protein Data Bank; the B-factor values; the appropriate validation of the structural models; the quality of the electron density maps, which is not uniform; and the temperature of the diffraction experiments. More stringent criteria produce smaller subsets, which can be enlarged with more tolerant selection criteria. The incessant growth of the Protein Data Bank and especially of the number of high-resolution structures is allowing the use of more stringent selection criteria, with a consequent improvement of the quality of the subsets of the Protein Data Bank.

  13. 2016 Draft Estuarine/Marine Copper Aquatic Life Ambient Water Quality Criteria

    EPA Pesticide Factsheets

    Documents pertain to Aquatic Life Ambient Water Quality criteria for Copper (2016 Estuarine/marine). These documents contain the safe levels of Copper in water that should protect to the majority of species.

  14. 40 CFR 90.510 - Compliance with acceptable quality level and passing and failing criteria for selective...

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 40 Protection of Environment 20 2011-07-01 2011-07-01 false Compliance with acceptable quality level and passing and failing criteria for selective enforcement audits. 90.510 Section 90.510....510 Compliance with acceptable quality level and passing and failing criteria for selective...

  15. Experiences with the European guidelines on quality criteria for radiographic images in Tanzania

    PubMed Central

    Muhogora, W. E.; Nyanda, A. M.; Kazema, R. R.

    2001-01-01

    Objective assessment of the quality of radiographic images is practically a difficult task and protocols that address this problem are few. In 1996, the European union published nearly objective image quality criteria to unify the practices in Europe. However, experience with these criteria in countries of lower health care levels is little documented. As a case study in Tanzania, we present the general performance of European guidelines in some Tanzanian hospitals to a total of 200 radiographs obtained from some common x‐ray examinations. The results show that more than 70% of chest (PA), lumbar spine (AP), and pelvis AP radiographs passed the quality criteria, while the performance of lumbar spine LAT x‐ray examinations was about 50% and therefore less satisfactory. The corresponding mean entrance dose to the patient for specified x‐ray techniques was of range 0.08–0.56 mGy, 3.1–7.7 mGy, 2.53–5.4 mGy, and 4.0–16.78 mGy for chest PA, lumbar spine AP, pelvis AP and lumbar spine LAT x‐ray examinations, respectively. Although a good number of observers were not well familiar to the guidelines, the quality criteria have been found useful and their adoption in the country recommended. The need to provide relevant education and training to staff in the radiology departments is of utmost importance. PACS number(s): 87.57.–s, 87.52.–g PMID:11686743

  16. Performance measures and criteria for hydrologic and water quality models

    USDA-ARS?s Scientific Manuscript database

    Performance measures and criteria are essential for model calibration and validation. This presentation will include a summary of one of the papers that will be included in the 2014 Hydrologic and Water Quality Model Calibration & Validation Guidelines Special Collection of the ASABE Transactions. T...

  17. Towards quality criteria for regional public health reporting: concept mapping with Dutch experts.

    PubMed

    van Bon-Martens, Marja J H; Achterberg, Peter W; van de Goor, Ien A M; van Oers, Hans A M

    2012-06-01

    In the Netherlands, municipal health assessments are carried out by 28 Regional Health Services, serving 418 municipalities. In the absence of guidelines, regional public health reports were developed in two pilot regions on the basis of the model and experience of national health reporting. Though they were well received and positively evaluated, it was not clear which specific characteristics determined 'good public health reporting'. Therefore, this study was set up to develop a theoretical framework for the quality of regional public health reporting in The Netherlands. Using concept mapping as a standardized tool for conceptualization, 35 relevant reporting experts formulated short statements in two different brainstorming sessions, describing specific quality criteria of regional public health reports. After the removal of duplicates, the list was supplemented with international criteria, and the statements were sent to each participant for rating and sorting. The results were processed statistically and represented graphically. The output was discussed and interpreted, leading to the final concept map. The final concept map consisted of 97 criteria, grouped into 13 clusters, and plotted in two dimensions: a 'product' dimension, ranging from 'production' to 'content', and a 'context' dimension, ranging from 'science' to 'policy'. The three most important clusters were: (i) 'solution orientation', (ii) 'policy relevance' and (iii) 'policy impact'. This study provided a theoretical framework for the quality of regional public health reporting, indicating relevant domains and criteria. Further work should translate domains and criteria into operational indicators for evaluating regional public health reports.

  18. Analysis of the longitudinal handling qualities and pilot-induced-oscillation tendencies of the High-Angle-of-Attack Research Vehicle (HARV)

    NASA Technical Reports Server (NTRS)

    Hess, Ronald A.

    1994-01-01

    The NASA High-Angle-of Attack Research Vehicle (HARV), a modified F-18 aircraft, experienced handling qualities problems in recent flight tests at NASA Dryden Research Center. Foremost in these problems was the tendency of the pilot-aircraft system to exhibit a potentially dangerous phenomenon known as a pilot-induced oscillation (PIO). When they occur, PIO's can severely restrict performance, sharply dimish mission capabilities, and can even result in aircraft loss. A pilot/vehicle analysis was undertaken with the goal of reducing these PIO tendencies and improving the overall vehicle handling qualities with as few changes as possible to the existing feedback/feedforward flight control laws. Utilizing a pair of analytical pilot models developed by the author, a pilot/vehicle analysis of the existing longitudinal flight control system was undertaken. The analysis included prediction of overall handling qualities levels and PIO susceptability. The analysis indicated that improvement in the flight control system was warranted and led to the formulation of a simple control stick command shaping filter. Analysis of the pilot/vehicle system with the shaping filter indicated significant improvements in handling qualities and PIO tendencies could be achieved. A non-real time simulation of the modified control system was undertaken with a realistic, nonlinear model of the current HARV. Special emphasis was placed upon those details of the command filter implementation which could effect safety of flight. The modified system is currently awaiting evaluation in the real-time, pilot-in-the-loop, Dual-Maneuvering-Simulator (DMS) facility at Langley.

  19. 40 CFR 91.608 - Compliance with acceptable quality level and passing and failing criteria for selective...

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... level and passing and failing criteria for selective enforcement audits. 91.608 Section 91.608... with acceptable quality level and passing and failing criteria for selective enforcement audits. (a) The prescribed acceptable quality level is 40 percent. (b) A failed engine is one whose final test...

  20. 40 CFR 89.510 - Compliance with acceptable quality level and passing and failing criteria for selective...

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... level and passing and failing criteria for selective enforcement audits. 89.510 Section 89.510... Compliance with acceptable quality level and passing and failing criteria for selective enforcement audits. (a) The prescribed acceptable quality level is 40 percent. (b) A failed engine is one whose final...

  1. 40 CFR 89.510 - Compliance with acceptable quality level and passing and failing criteria for selective...

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... level and passing and failing criteria for selective enforcement audits. 89.510 Section 89.510... Compliance with acceptable quality level and passing and failing criteria for selective enforcement audits. (a) The prescribed acceptable quality level is 40 percent. (b) A failed engine is one whose final...

  2. 40 CFR 91.608 - Compliance with acceptable quality level and passing and failing criteria for selective...

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... level and passing and failing criteria for selective enforcement audits. 91.608 Section 91.608... with acceptable quality level and passing and failing criteria for selective enforcement audits. (a) The prescribed acceptable quality level is 40 percent. (b) A failed engine is one whose final test...

  3. 40 CFR 91.608 - Compliance with acceptable quality level and passing and failing criteria for selective...

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... level and passing and failing criteria for selective enforcement audits. 91.608 Section 91.608... with acceptable quality level and passing and failing criteria for selective enforcement audits. (a) The prescribed acceptable quality level is 40 percent. (b) A failed engine is one whose final test...

  4. Management of common gastrointestinal disorders: quality criteria based on patients' views and practice guidelines

    PubMed Central

    Jones, Roger; Hunt, Claire; Stevens, Richard; Dalrymple, Jamie; Driscoll, Richard; Sleet, Sarah; Smith, Jonathan Blanchard

    2009-01-01

    Background Although gastrointestinal disorders are common in general practice, clinical guidelines are not always implemented, and few patient-generated quality criteria are available to guide management. Aim To develop quality criteria for the management of four common gastrointestinal disorders: coeliac disease, gastro-oesophageal reflux disease (GORD), inflammatory bowel disease, and irritable bowel syndrome. Design of study Qualitative study including thematic analysis of transcripts from patient focus groups and content analysis of published clinical practice guidelines. Emergent themes were synthesised by a consensus panel, into quality criteria for each condition. Setting Community-based practice in England, UK. Methods Fourteen focus groups were conducted (four for coeliac disease, irritable bowel syndrome, and inflammatory bowel disease, and two for GORD) involving a total of 93 patients (64 females, 29 males; mean age 55.4 years). Quality criteria were based on patients' views and expectations, synthesised with an analysis of clinical practice guidelines. Results A chronic disease management model was developed for each condition. Key themes included improving the timeliness and accuracy of diagnosis, appropriate use of investigations, better provision of information for patients, including access to patient organisations, better communication with, and access to, secondary care providers, and structured follow-up and regular review, particularly for coeliac disease and inflammatory bowel disease. Conclusion This study provides a model for the development of quality markers for chronic disease management in gastroenterology, which is likely to be applicable to other chronic conditions. PMID:19520018

  5. Multi-criteria decision making in flood risk management: research progress and the challenge of handling uncertainty and stakeholder participation

    NASA Astrophysics Data System (ADS)

    Madruga de Brito, Mariana; Evers, Mariele

    2016-04-01

    Multi-Criteria Decision Making (MCDM) methods have received much attention from researchers and practitioners for solving flood risk management problems in the last decades due to its capacity to deal with multiple criteria, conflicting objectives as well as the knowledge arising from the participation of several actors. In order to consolidate recent research conducted in this area, this study presents a state-of-the-art literature review of MCDM applications to flood risk management, seeking to provide a better understanding of the current status of how participatory MCDM is being conducted and the way uncertainties are included in the decision-making process. Totally, 128 peer-reviewed papers published from 1995 to June 2015 in 72 different journals were systematically analyzed. Results indicated that the number of flood MCDM publications has exponentially grown during this period, with over 82% of all papers published since 2009. A wide range of application areas was identified, with most papers focusing on ranking alternatives for flood mitigation (22.78% of the total) followed by risk (21.11%) and vulnerability assessment (15%). The Analytical Hierarchy Process (AHP) was the most popular MCDM method (42.72%) followed by Technique for Order Preference by Similarity to an Ideal Solution (TOPSIS) (13.33%) and Weighted Sum Method (WSM) (12.73%). Although significant improvements have been made over the last decades, shortcomings remain in handling the uncertainty. Only eight papers (6.25%) have conducted uncertainty analysis, suggesting that a general procedure for performing it in MCDM does not yet exist. Researchers have applied the Monte Carlo simulation, Taylor's series error propagation method or assessed the uncertainty in qualitative ways, by describing its main sources or analyzing the stakeholders' degree of confidence. In addition, 35 articles (27.34%) have performed a sensitivity analysis of the criteria weights. Three distinct approaches were

  6. Putting ISO 9000 Standards and Baldrige Quality Criteria To Work Now in Public Education.

    ERIC Educational Resources Information Center

    Clark, Don

    1999-01-01

    The National Association for Industry-Education Cooperation (NAIEC) creates an approach for school system improvement that combines the necessary standards for achieving mileposts of the Baldrige Quality Criteria and the International Organization of Standardization (ISO) 9000 Standards for Education. Together, the Baldrige Criteria and ISO…

  7. Estimation of Effect Thresholds for the Development of Water Quality Criteria

    EPA Science Inventory

    Biological and ecological effect thresholds can be used for determining safe levels of nontraditional stressors. The U.S. EPA Framework for Developing Suspended and Bedded Sediments (SABS) Water Quality Criteria (WQC) [36] uses a risk assessment approach to estimate effect thre...

  8. A survey-based benchmarking approach for health care using the Baldrige quality criteria.

    PubMed

    Jennings, K; Westfall, F

    1994-09-01

    Since 1988, manufacturing and service industries have been using the Malcolm Baldrige National Quality Award to assess their management processes (for example, leadership, information, and analysis) against critical performance criteria. Recognizing that the typical Baldrige assessment is time intensive and dependent on intensive training, The Pacer Group, a consulting firm in Dayton, Ohio, developed a self-assessment tool based on the Baldrige criteria which provides a snapshot assessment of an organization's management practices. The survey was administered at 25 hospitals within a health care system. Hospitals were able to compare their scores with other hospitals in the system, as well as the scores of a Baldrige award winner. Results were also analyzed on a systemwide basis to identify strengths and weaknesses across the system. For all 25 hospitals, the following areas were identified as strengths: management of process quality, leadership, and customer focus and satisfaction. Weaknesses included lack of employee involvement in the quality planning process, poor design of quality systems, and lack of cross-departmental cooperation. One of the surveyed hospitals launched improvement initiatives in knowledge of improvement tools and methods and in a patient satisfaction focus. A team was formed to improve the human resource management system. Also, a new unit was designed using patient-centered care principles. A team re-evaluated every operation that affected patients on the unit. A survey modeled after the Baldrige Award criteria can be useful in benchmarking an organization's quality improvement practices.

  9. 45 CFR 302.20 - Separation of cash handling and accounting functions.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 45 Public Welfare 2 2010-10-01 2010-10-01 false Separation of cash handling and accounting... accounting functions. The State plan shall provide that the following requirements and criteria to separate the cash handling and accounting functions are in effect. (a) IV-D responsibility. The IV-D agency...

  10. Plutonium storage criteria

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Chung, D.; Ascanio, X.

    1996-05-01

    The Department of Energy has issued a technical standard for long-term (>50 years) storage and will soon issue a criteria document for interim (<20 years) storage of plutonium materials. The long-term technical standard, {open_quotes}Criteria for Safe Storage of Plutonium Metals and Oxides,{close_quotes} addresses the requirements for storing metals and oxides with greater than 50 wt % plutonium. It calls for a standardized package that meets both off-site transportation requirements, as well as remote handling requirements from future storage facilities. The interim criteria document, {open_quotes}Criteria for Interim Safe Storage of Plutonium-Bearing Solid Materials{close_quotes}, addresses requirements for storing materials with less thanmore » 50 wt% plutonium. The interim criteria document assumes the materials will be stored on existing sites, and existing facilities and equipment will be used for repackaging to improve the margin of safety.« less

  11. Habitat-based PCB environmental quality criteria for the protection of endangered killer whales (Orcinus orca).

    PubMed

    Alava, Juan José; Ross, Peter S; Lachmuth, Cara; Ford, John K B; Hickie, Brendan E; Gobas, Frank A P C

    2012-11-20

    The development of an area-based polychlorinated biphenyl (PCB) food-web bioaccumulation model enabled a critical evaluation of the efficacy of sediment quality criteria and prey tissue residue guidelines in protecting fish-eating resident killer whales of British Columbia and adjacent waters. Model-predicted and observed PCB concentrations in resident killer whales and Chinook salmon were in good agreement, supporting the model's application for risk assessment and criteria development. Model application shows that PCB concentrations in the sediments from the resident killer whale's Critical Habitats and entire foraging range leads to PCB concentrations in most killer whales that exceed PCB toxicity threshold concentrations reported for marine mammals. Results further indicate that current PCB sediment quality and prey tissue residue criteria for fish-eating wildlife are not protective of killer whales and are not appropriate for assessing risks of PCB-contaminated sediments to high trophic level biota. We present a novel methodology for deriving sediment quality criteria and tissue residue guidelines that protect biota of high trophic levels under various PCB management scenarios. PCB concentrations in sediments and in prey that are deemed protective of resident killer whale health are much lower than current criteria values, underscoring the extreme vulnerability of high trophic level marine mammals to persistent and bioaccumulative contaminants.

  12. Defining quality criteria for online continuing medical education modules using modified nominal group technique.

    PubMed

    Shortt, S E D; Guillemette, Jean-Marc; Duncan, Anne Marie; Kirby, Frances

    2010-01-01

    The rapid increase in the use of the Internet for continuing education by physicians suggests the need to define quality criteria for accredited online modules. Continuing medical education (CME) directors from Canadian medical schools and academic researchers participated in a consensus process, Modified Nominal Group Technique, to develop agreement on the most important quality criteria to guide module development. Rankings were compared to responses to a survey of a subset of Canadian Medical Association (CMA) members. A list of 17 items was developed, of which 10 were deemed by experts to be important and 7 were considered secondary. A quality module would: be needs-based; presented in a clinical format; utilize evidence-based information; permit interaction with content and experts; facilitate and attempt to document practice change; be accessible for later review; and include a robust course evaluation. There was less agreement among CMA members on criteria ranking, with consensus on ranking reached on only 12 of 17 items. In contrast to experts, members agreed that the need to assess performance change as a result of an educational experience was not important. This project identified 10 quality criteria for accredited online CME modules that representatives of Canadian organizations involved in continuing education believe should be taken into account when developing learning products. The lack of practitioner support for documentation of change in clinical behavior may suggest that they favor traditional attendance- or completion-based CME; this finding requires further research.

  13. Longitudinal Handling Qualities of the Tu-144LL Airplane and Comparisons With Other Large, Supersonic Aircraft

    NASA Technical Reports Server (NTRS)

    Cox, Timothy H.; Marshall, Alisa

    2000-01-01

    Four flights have been conducted using the Tu-144LL supersonic transport aircraft with the dedicated objective of collecting quantitative data and qualitative pilot comments. These data are compared with the following longitudinal flying qualities criteria: Neal-Smith, short-period damping, time delay, control anticipation parameter, phase delay (omega(sp)*T(theta(2))), pitch bandwidth as a function of time delay, and flight path as a function of pitch bandwidth. Determining the applicability of these criteria and gaining insight into the flying qualities of a large, supersonic aircraft are attempted. Where appropriate, YF-12, XB-70, and SR-71 pilot ratings are compared with the Tu-144LL results to aid in the interpretation of the Tu-144LL data and to gain insight into the application of criteria. The data show that approach and landing requirements appear to be applicable to the precision flightpath control required for up-and-away flight of large, supersonic aircraft. The Neal-Smith, control anticipation parameter, and pitch-bandwidth criteria tend to correlate with the pilot comments better than the phase delay criterion, omega(sp)*T(theta(2)). The data indicate that the detrimental flying qualities implication of decoupled pitch-attitude and flightpath responses occurring for high-speed flight may be mitigated by requiring the pilot to close the loop on flightpath or vertical speed.

  14. 40 CFR 86.610-98 - Compliance with acceptable quality level and passing and failing criteria for Selective...

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... level and passing and failing criteria for Selective Enforcement Audits. 86.610-98 Section 86.610-98... quality level and passing and failing criteria for Selective Enforcement Audits. (a) The prescribed acceptable quality level is 40 percent. (b) A failed vehicle is one whose final deteriorated test results...

  15. 40 CFR 86.610-98 - Compliance with acceptable quality level and passing and failing criteria for Selective...

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... level and passing and failing criteria for Selective Enforcement Audits. 86.610-98 Section 86.610-98... quality level and passing and failing criteria for Selective Enforcement Audits. (a) The prescribed acceptable quality level is 40 percent. (b) A failed vehicle is one whose final deteriorated test results...

  16. 40 CFR 86.610-98 - Compliance with acceptable quality level and passing and failing criteria for Selective...

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... level and passing and failing criteria for Selective Enforcement Audits. 86.610-98 Section 86.610-98... quality level and passing and failing criteria for Selective Enforcement Audits. (a) The prescribed acceptable quality level is 40 percent. (b) A failed vehicle is one whose final deteriorated test results...

  17. 40 CFR 86.610-98 - Compliance with acceptable quality level and passing and failing criteria for Selective...

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... level and passing and failing criteria for Selective Enforcement Audits. 86.610-98 Section 86.610-98... quality level and passing and failing criteria for Selective Enforcement Audits. (a) The prescribed acceptable quality level is 40 percent. (b) A failed vehicle is one whose final deteriorated test results...

  18. [Quality control criteria in the surgical management of advanced ovarian cancers].

    PubMed

    Querleu, D; Narducci, F

    2009-12-01

    Two concurrent policies can be proposed to improve the quality of care for ovarian cancer surgery: organization of care, audit. The two policies are not to be opposed: the efficacy of any policy must be audited, targets are more rapidly reached and more easily audited when an underlying organization is available. However, the arbitrary definition of criteria is a challenge. The interpretation of results depends on the context of each individual center. There is a definite risk of unwanted effects: competition to reach the cut-off if quantitative caseload criteria are demanded, reduction of the quality of cytoreduction if the complication rate is included, selection of patients if the rate of complete cytoreduction is chosen as a major parameter. Quality control must encompass the standard of preoperative workup, the quality of operative report, the complication rate and the oncological outcome. Although quantitative yearly caseload requirements may contribute to the quality of care, it seems more pertinent to recall the prerequisites that the surgeon must fulfil before undertaking a surgery for ovarian cancer. Knowledge of the specific features of the disease and of all the components of its medical management, skills in general surgical procedures required to complete staging and cytoreduction, and contribution to a multidisciplinary team involved in clinical research are mandatory. Even though no definitive proof is available, the available information tend to show a superiority of the standard of surgical care provided by experienced or specialized surgeons.

  19. Translator for Optimizing Fluid-Handling Components

    NASA Technical Reports Server (NTRS)

    Landon, Mark; Perry, Ernest

    2007-01-01

    A software interface has been devised to facilitate optimization of the shapes of valves, elbows, fittings, and other components used to handle fluids under extreme conditions. This software interface translates data files generated by PLOT3D (a NASA grid-based plotting-and- data-display program) and by computational fluid dynamics (CFD) software into a format in which the files can be read by Sculptor, which is a shape-deformation- and-optimization program. Sculptor enables the user to interactively, smoothly, and arbitrarily deform the surfaces and volumes in two- and three-dimensional CFD models. Sculptor also includes design-optimization algorithms that can be used in conjunction with the arbitrary-shape-deformation components to perform automatic shape optimization. In the optimization process, the output of the CFD software is used as feedback while the optimizer strives to satisfy design criteria that could include, for example, improved values of pressure loss, velocity, flow quality, mass flow, etc.

  20. Economic evaluation of flying-qualities design criteria for a transport configured with relaxed static stability

    NASA Technical Reports Server (NTRS)

    Sliwa, S. M.

    1980-01-01

    Direct constrained parameter optimization was used to optimally size a medium range transport for minimum direct operating cost. Several stability and control constraints were varied to study the sensitivity of the configuration to specifying the unaugmented flying qualities of transports designed to take maximum advantage of relaxed static stability augmentation systems. Additionally, a number of handling qualities related design constants were studied with respect to their impact on the design.

  1. 48 CFR 46.203 - Criteria for use of contract quality requirements.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... 48 Federal Acquisition Regulations System 1 2012-10-01 2012-10-01 false Criteria for use of contract quality requirements. 46.203 Section 46.203 Federal Acquisition Regulations System FEDERAL...) Commercial (described in commercial catalogs, drawings, or industrial standards; see part 2); or (2) Military...

  2. 48 CFR 46.203 - Criteria for use of contract quality requirements.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... 48 Federal Acquisition Regulations System 1 2013-10-01 2013-10-01 false Criteria for use of contract quality requirements. 46.203 Section 46.203 Federal Acquisition Regulations System FEDERAL...) Commercial (described in commercial catalogs, drawings, or industrial standards; see part 2); or (2) Military...

  3. 48 CFR 46.203 - Criteria for use of contract quality requirements.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... 48 Federal Acquisition Regulations System 1 2014-10-01 2014-10-01 false Criteria for use of contract quality requirements. 46.203 Section 46.203 Federal Acquisition Regulations System FEDERAL...) Commercial (described in commercial catalogs, drawings, or industrial standards; see part 2); or (2) Military...

  4. 48 CFR 46.203 - Criteria for use of contract quality requirements.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 48 Federal Acquisition Regulations System 1 2010-10-01 2010-10-01 false Criteria for use of contract quality requirements. 46.203 Section 46.203 Federal Acquisition Regulations System FEDERAL...) Commercial (described in commercial catalogs, drawings, or industrial standards; see part 2); or (2) Military...

  5. 48 CFR 46.203 - Criteria for use of contract quality requirements.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 48 Federal Acquisition Regulations System 1 2011-10-01 2011-10-01 false Criteria for use of contract quality requirements. 46.203 Section 46.203 Federal Acquisition Regulations System FEDERAL...) Commercial (described in commercial catalogs, drawings, or industrial standards; see part 2); or (2) Military...

  6. GEOGRAPHIC-SPECIFIC WATER QUALITY CRITERIA DEVELOPMENT WITH MONITORING DATA USING CONDITIONAL PROBABILITIES - A PROPOSED APPROACH

    EPA Science Inventory

    A conditional probability approach using monitoring data to develop geographic-specific water quality criteria for protection of aquatic life is presented. Typical methods to develop criteria using existing monitoring data are limited by two issues: (1) how to extrapolate to an...

  7. Development of reclaimed potable water quality criteria

    NASA Technical Reports Server (NTRS)

    Flory, D. A.; Weir, F. W.

    1979-01-01

    In order to minimize launch requirements necessary to meet the demands of long-term spaceflight, NASA will reuse water reclaimed from various on-board sources including urine, feces, wash water and humidity condensate. Development of reclamation systems requires the promulgation of water quality standards for potable reuse of the reclaimed water. Existing standards for domestic U.S. potable water consumption were developed, but do not consider the peculiar problems associated with the potable reuse of recycled water. An effort was made to: (1) define a protocol by which comprehensive reclaimed water potability/palatability criteria can be established and updated; and (2) continue the effort to characterize the organic content of reclaimed water in the Regenerative Life Support Evaluation.

  8. NHEXAS PHASE I REGION 5 STUDY--STANDARD OPERATING PROCEDURE--HANDLING QUALITY CONTROL SAMPLES IN THE FIELD (RTI/ACS-AP-209-090)

    EPA Science Inventory

    This protocol describes how quality control samples should be handled in the field, and was designed as a quick reference source for the field staff. The protocol describes quality control samples for air-VOCs, air-particles, water samples, house dust, soil, urine, blood, hair, a...

  9. Assessing the conceptual clarity and evidence base of quality criteria/standards developed for evaluating decision aids

    PubMed Central

    McDonald, Heather; Charles, Cathy; Gafni, Amiram

    2011-01-01

    Abstract Context  Promoting patient participation in treatment decision making is of increasing interest to researchers, clinicians and policy makers. Decision aids (DAs) are advocated as one way to help achieve this goal. Despite their proliferation, there has been little agreement on criteria or standards for evaluating these tools. To fill this gap, an international collaboration of researchers and others interested in the development, content and quality of DAs have worked over the past several years to develop a checklist and, based on this checklist, an instrument for determining whether any given DA meets a defined set of quality criteria. Objective/Methods  In this paper, we offer a framework for assessing the conceptual clarity and evidence base used to support the development of quality criteria/standards for evaluating DAs. We then apply this framework to assess the conceptual clarity and evidence base underlying the International Patient Decision Aids Standards (IPDAS) checklist criteria for one of the checklist domains: how best to present in DAs probability information to patients on treatment benefits and risks. Conclusion  We found that some of the central concepts underlying the presenting probabilities domain were not defined. We also found gaps in the empirical evidence and theoretical support for this domain and criteria within this domain. Finally, we offer suggestions for steps that should be undertaken for further development and refinement of quality standards for DAs in the future. PMID:22050440

  10. Helicopter roll control effectiveness criteria program summary

    NASA Technical Reports Server (NTRS)

    Heffley, Robert K.; Bourne, Simon M.; Mnich, Marc A.

    1988-01-01

    A study of helicopter roll control effectiveness is summarized for the purpose of defining military helicopter handling qualities requirements. The study is based on an analysis of pilot-in-the-loop task performance of several basic maneuvers. This is extended by a series of piloted simulations using the NASA Ames Vertical Motion Simulator and selected flight data. The main results cover roll control power and short-term response characteristics. In general the handling qualities requirements recommended are set in conjunction with desired levels of flight task and maneuver response which can be directly observed in actual flight. An important aspect of this, however, is that vehicle handling qualities need to be set with regard to some quantitative aspect of mission performance. Specific examples of how this can be accomplished include a lateral unmask/remask maneuver in the presence of a threat and an air tracking maneuver which recognizes the kill probability enhancement connected with decreasing the range to the target. Conclusions and recommendations address not only the handling qualities recommendations, but also the general use of flight simulators and the dependence of mission performance on handling qualities.

  11. [Quality criteria and indicators of women's health care].

    PubMed

    Mandú, Edir Nei Teixeira

    2005-04-01

    In this article, quality criteria and indicators of the basic care of the woman's health are presented with emphasis on the sexual and reproductive health that can be used in the management of supervision practices. In its elaboration, formulations regarding the evaluating practice, the managerial work, the full care to the woman's health (sexual and reproductive) are taken into consideration, besides proposals of the Health Ministry for monitoring the attention to this specific group. It focuses mainly on care and vigilance actions as to the women's health and on organizational and managerial aspects of such care.

  12. Institutional Advancement: Using the Malcolm Baldrige National Quality Award Criteria for Self-Study and Accreditation.

    ERIC Educational Resources Information Center

    Cooke, Brian

    The criteria used for the Malcolm Baldrige National Quality Award can provide community colleges with a strategic tool for college planning, management, assessment, and accreditation. The Criteria focus on two measurable objectives for institutional effectiveness: the delivery of educational value to current and future students through instruction…

  13. Augmenting Species Diversity in Water Quality Criteria Derivation using Interspecies Correlation Models

    EPA Science Inventory

    The specific requirements for taxa diversity of the 1985 guidelines have limited the number of ambient water quality criteria (AWQC) developed for aquatic life protection. The EPA developed the Web-based Interspecies Correlation Estimation (Web-ICE) tool to allow extrapolation of...

  14. Considerations in the Derivation of Water Quality Criteria for Endocrine-disrupting Chemicals

    EPA Science Inventory

    When the USEPA’s 1985 guidelines for deriving numerical water quality criteria (WQC) for the protection of aquatic life were developed there was little anticipation that endocrine-disrupting chemicals (EDCs) would be come a widespread environmental issue. While the basic guidelin...

  15. Handling Qualities Flight Testing of the Stratospheric Observatory for Infrared Astronomy (SOFIA)

    NASA Technical Reports Server (NTRS)

    Glaser, Scott T.; Strovers, Brian K.

    2011-01-01

    Airborne infrared astronomy has a long successful history, albeit relatively unknown outside of the astronomy community. A major problem with ground based infrared astronomy is the absorption and scatter of infrared energy by water in the atmosphere. Observing the universe from above 40,000 ft puts the observation platform above 99% of the water vapor in the atmosphere, thereby addressing this problem at a fraction of the cost of space based systems. The Stratospheric Observatory For Infrared Astronomy (SOFIA) aircraft is the most ambitious foray into the field of airborne infrared astronomy in history. Using a 747SP (The Boeing Company, Chicago, Illinois) aircraft modified with a 2.5m telescope located in the aft section of the fuselage, the SOFIA endeavors to provide views of the universe never before possible and at a fraction of the cost of space based systems. The modification to the airplane includes moveable doors and aperture that expose the telescope assembly. The telescope assembly is aimed and stabilized using a multitude of on board systems. This modification has the potential to cause aerodynamic anomalies that could induce undesired forces either at the cavity itself or indirectly due to interference with the empennage, both of which could cause handling qualities issues. As a result, an extensive analysis and flight test program was conducted from December 2009 through March 2011. Several methods, including a Lower Order Equivalent Systems analysis and pilot assessment, were used to ascertain the effects of the modification. The SOFIA modification was found to cause no adverse handling qualities effects and the aircraft was cleared for operational use. This paper discusses the history and modification to the aircraft, development of test procedures and analysis, results of testing and analysis, lessons learned for future projects and justification for operational certification.

  16. Air Quality Criteria for Particulate Matter (Fourth External Review Draft) [revised Chapter 9, August 2004

    EPA Science Inventory

    EPA is in the process of updating and revising, where appropriate, its Air Quality Criteria for Particulate Matter (PM) as issued in 1996 (usually referred to as the Criteria Document). Sections 108 and 109 of the Clean Air Act require that EPA carry out a periodic review and re...

  17. 77 FR 11112 - Proposed Approval of the Central Characterization Project's Remote-Handled Transuranic Waste...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-02-24

    ... Central Characterization Project's Remote-Handled Transuranic Waste Characterization Program at the...-handled (RH), transuranic (TRU) waste characterization program implemented by the Central Characterization... Criteria, EPA evaluated the characterization of RH TRU debris waste from SRS-CCP during an inspection on...

  18. Derivation of site-specific surface water quality criteria for the protection of aquatic ecosystems near a Korean military training facility.

    PubMed

    Jeong, Seung-Woo; An, Youn-Joo

    2014-01-01

    This study suggested the first Korean site-specific ecological surface water quality criteria for the protection of ecosystems near an artillery range at a Korean military training facility. Surface water quality (SWQ) criteria in Korea address human health protection but do not encompass ecological criteria such as limits for metals and explosives. The first objective of this study was to derive site-specific SWQ criteria for the protection of aquatic ecosystems in Hantan River, Korea. The second objective was to establish discharge criteria for the artillery range to protect the aquatic ecosystems of Hantan River. In this study, we first identified aquatic organisms living in the Hantan River, including fishes, reptiles, invertebrates, phytoplankton, zooplankton, and amphibians. Second, we collected ecotoxicity data for these aquatic organisms and constructed an ecotoxicity database for Cd, Cu, Zn, TNT, and RDX. This study determined the ecological maximum permissible concentrations for metals and explosives based on the ecotoxicity database and suggested ecological surface water quality criteria for the Hantan River by considering analytical detection limits. Discharge limit criteria for the shooting range were determined based on the ecological surface water quality criteria suggested for Hantan River with further consideration of the dilution of the contaminants discharged into the river.

  19. 40 CFR 131.11 - Criteria.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) WATER PROGRAMS WATER QUALITY STANDARDS Establishment of Water Quality Standards § 131.11 Criteria. (a) Inclusion of pollutants: (1) States must adopt those water quality criteria that protect the designated use. Such criteria must be based on sound...

  20. Flying qualities criteria for GA single pilot IFR operations

    NASA Technical Reports Server (NTRS)

    Bar-Gill, A.

    1982-01-01

    The flying qualities criteria in general aviation (GA) to decrease accidents are discussed. The following in-flight research is discussed: (1) identification of key aerodynamic configurations; (2) implementation of an in-flight simulator; (3) mission matrix design; (4) experimental systems; (5) data reduction; (6) optimal flight path reconstruction. Some of the accomplished work is reported: an integrated flight testing and flight path reconstruction methodology was developd, high accuracy in trajectory estimation was achieved with an experimental setup, and a part of the flight test series was flown.

  1. 40 CFR 158.1010 - Applicator exposure-criteria for testing.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ...) PESTICIDE PROGRAMS DATA REQUIREMENTS FOR PESTICIDES Human Exposure § 158.1010 Applicator exposure—criteria... epidemiological or poisoning incident data indicate that adverse health effects may have resulted from handling of the pesticide. (b) Exposure criteria. (1) Dermal exposure may occur during the prescribed use. (2...

  2. 40 CFR 158.1010 - Applicator exposure-criteria for testing.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ...) PESTICIDE PROGRAMS DATA REQUIREMENTS FOR PESTICIDES Human Exposure § 158.1010 Applicator exposure—criteria... epidemiological or poisoning incident data indicate that adverse health effects may have resulted from handling of the pesticide. (b) Exposure criteria. (1) Dermal exposure may occur during the prescribed use. (2...

  3. 40 CFR 158.1010 - Applicator exposure-criteria for testing.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ...) PESTICIDE PROGRAMS DATA REQUIREMENTS FOR PESTICIDES Human Exposure § 158.1010 Applicator exposure—criteria... epidemiological or poisoning incident data indicate that adverse health effects may have resulted from handling of the pesticide. (b) Exposure criteria. (1) Dermal exposure may occur during the prescribed use. (2...

  4. 40 CFR 158.1010 - Applicator exposure-criteria for testing.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ...) PESTICIDE PROGRAMS DATA REQUIREMENTS FOR PESTICIDES Human Exposure § 158.1010 Applicator exposure—criteria... epidemiological or poisoning incident data indicate that adverse health effects may have resulted from handling of the pesticide. (b) Exposure criteria. (1) Dermal exposure may occur during the prescribed use. (2...

  5. 40 CFR 158.1010 - Applicator exposure-criteria for testing.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ...) PESTICIDE PROGRAMS DATA REQUIREMENTS FOR PESTICIDES Human Exposure § 158.1010 Applicator exposure—criteria... epidemiological or poisoning incident data indicate that adverse health effects may have resulted from handling of the pesticide. (b) Exposure criteria. (1) Dermal exposure may occur during the prescribed use. (2...

  6. Recommended Water Quality Criteria for Octahydro-1,3,5,7-Tentranitro-1, 3,5,7-Tetrazocin (HMX).

    DTIC Science & Technology

    1989-03-27

    possible to derive water quality criteria for protection of aquatic life following USEPA guidelines. Based on the NOAEL of 50 mg/kg/day from the 13-week...special reference to those on human, mammalian, and aquatic health effects, and to generate water quality criteria for drinking water and for the...and discussed below. Aquatic Invertebrates Bentley et al. (1977) performed static acute toxicity tests on four species of freshwater invertebrates

  7. Automobile ride quality experiments correlated to iso-weighted criteria

    NASA Technical Reports Server (NTRS)

    Healey, A. J.; Young, R. K.; Smith, C. C.

    1975-01-01

    As part of an overall study to evaluate the usefulness of ride quality criteria for the design of improved ground transportation systems an experiment was conducted involving subjective and objective measurement of ride vibrations found in an automobile riding over roadways of various roughness. Correlation of the results led to some very significant relationships between passenger rating and ride accelerations. The latter were collapsed using a frequency-weighted root mean square measure of the random vibration. The results suggest the form of a design criterion giving the relationship between ride vibration and acceptable automobile ride quality. Further the ride criterion is expressed in terms that relate to rides with which most people are familiar. The design of the experiment, the ride vibration data acquisition, the concept of frequency weighting and the correlations found between subjective and objective measurements are presented.

  8. A modal analysis of flexible aircraft dynamics with handling qualities implications

    NASA Technical Reports Server (NTRS)

    Schmidt, D. K.

    1983-01-01

    A multivariable modal analysis technique is presented for evaluating flexible aircraft dynamics, focusing on meaningful vehicle responses to pilot inputs and atmospheric turbulence. Although modal analysis is the tool, vehicle time response is emphasized, and the analysis is performed on the linear, time-domain vehicle model. In evaluating previously obtained experimental pitch tracking data for a family of vehicle dynamic models, it is shown that flexible aeroelastic effects can significantly affect pitch attitude handling qualities. Consideration of the eigenvalues alone, of both rigid-body and aeroelastic modes, does not explain the simulation results. Modal analysis revealed, however, that although the lowest aeroelastic mode frequency was still three times greater than the short-period frequency, the rigid-body attitude response was dominated by this aeroelastic mode. This dominance was defined in terms of the relative magnitudes of the modal residues in selected vehicle responses.

  9. Fact Sheet: Notice of Ambient Water Quality Criteria Document for Tributyltin (TBT) - Final

    EPA Pesticide Factsheets

    Information pertaining to 2004 Final Acute and Chronic Ambient Aquatic Life Water Quality Criteria for Tributyltin (TBT) for freshwater and saltwater. This fact sheet includes the safe levels of TBT that should protect the majority of species.

  10. Framework for Derivation of Water Quality Criteria Using the Biotic Ligand Model: Copper as a Case Study.

    PubMed

    Gondek, John C; Gensemer, Robert W; Claytor, Carrie A; Canton, Steven P; Gorsuch, Joseph W

    2018-06-01

    Acceptance of the Biotic Ligand Model (BLM) to derive aquatic life criteria, for metals in general and copper in particular, is growing amongst regulatory agencies worldwide. Thus, it is important to ensure that water quality data are used appropriately and consistently in deriving such criteria. Here we present a suggested BLM implementation framework (hereafter referred to as "the Framework") to help guide the decision-making process when designing sampling and analysis programs for use of the BLM to derive water quality criteria applied on a site-specific basis. Such a framework will help inform stakeholders on the requirements needed to derive BLM-based criteria, and thus, ensure the appropriate types and amount of data are being collected and interpreted. The Framework was developed for calculating BLM-based criteria when data are available from multiple sampling locations on a stream. The Framework aspires to promote consistency when applying the BLM across datasets of disparate water quality, data quantity, and spatial and temporal representativeness, and is meant to be flexible to maximize applicability over a wide range of scenarios. Therefore, the Framework allows for a certain level of interpretation and adjustment to address the issues unique to each dataset. This article is protected by copyright. All rights reserved. This article is protected by copyright. All rights reserved.

  11. Criteria for evaluating programme theory diagrams in quality improvement initiatives: a structured method for appraisal.

    PubMed

    Issen, Laurel; Woodcock, Thomas; McNicholas, Christopher; Lennox, Laura; Reed, Julie E

    2018-04-09

    Despite criticisms that many quality improvement (QI) initiatives fail due to incomplete programme theory, there is no defined way to evaluate how programme theory has been articulated. The objective of this research was to develop, and assess the usability and reliability of scoring criteria to evaluate programme theory diagrams. Criteria development was informed by published literature and QI experts. Inter-rater reliability was tested between two evaluators. About 63 programme theory diagrams (42 driver diagrams and 21 action-effect diagrams) were reviewed to establish whether the criteria could support comparative analysis of different approaches to constructing diagrams. Components of the scoring criteria include: assessment of overall aim, logical overview, clarity of components, cause-effect relationships, evidence and measurement. Independent reviewers had 78% inter-rater reliability. Scoring enabled direct comparison of different approaches to developing programme theory; action-effect diagrams were found to have had a statistically significant but moderate improvement in programme theory quality over driver diagrams; no significant differences were observed based on the setting in which driver diagrams were developed. The scoring criteria summarise the necessary components of programme theory that are thought to contribute to successful QI projects. The viability of the scoring criteria for practical application was demonstrated. Future uses include assessment of individual programme theory diagrams and comparison of different approaches (e.g. methodological, teaching or other QI support) to produce programme theory. The criteria can be used as a tool to guide the production of better programme theory diagrams, and also highlights where additional support for QI teams could be needed.

  12. Use of SSDs in the USA – endangered species and water quality criteria

    EPA Science Inventory

    Species sensitivity distributions (SSDs) are used in the United States (US) in the development of national ambient water quality criteria (AWQC), with site-specific and numeric modifications to protect sensitive taxa including threatened and endangered species. The US Environment...

  13. 40 CFR 90.510 - Compliance with acceptable quality level and passing and failing criteria for selective...

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... level and passing and failing criteria for selective enforcement audits. 90.510 Section 90.510....510 Compliance with acceptable quality level and passing and failing criteria for selective... failed engine is an engine whose final test results pursuant to § 90.509(b), for one or more of the...

  14. 40 CFR 90.510 - Compliance with acceptable quality level and passing and failing criteria for selective...

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... level and passing and failing criteria for selective enforcement audits. 90.510 Section 90.510....510 Compliance with acceptable quality level and passing and failing criteria for selective... failed engine is an engine whose final test results pursuant to § 90.509(b), for one or more of the...

  15. A Systematic Review and Taxonomy of Published Quality Criteria Related to the Evaluation of User-Facing eHealth Programs.

    PubMed

    Baumel, Amit; Birnbaum, Michael L; Sucala, Madalina

    2017-08-01

    The purpose of this review was to identify and classify key criteria concepts related to the evaluation of user-facing eHealth programs. In line with the PRISMA statement methodology, computer searches of relevant databases were conducted for studies published between January 1, 2000 and March 1, 2016 that contained explicit quality criteria related to mHealth and eHealth products. Reference lists of included articles, review articles, and grey literature (e.g., books, websites) were searched for additional sources. A team of nine experts led by the first author was gathered to support the classification of these criteria. Identified criteria were extracted, grouped and organized using an inductive thematic analysis. Eighty-four sources - emanating from 26 different courtiers - were included in this review. The team extracted 454 criteria that were grouped into 11 quality domains, 58 criteria concepts and 134 concepts' sub-groups. Quality domains were: Usability, Visual Design, User Engagement, Content, Behavior Change/Persuasive Design, Influence of Social Presence, Therapeutic Alliance, Classification, Credibility/Accountability, and Privacy/Security. Findings suggest that authors around the globe agree on key criteria concepts when evaluating user-facing eHealth products. The high proportion of new published criteria in the second half of this review time-frame (2008-2016), and more specifically, the high proportion of criteria relating to persuasive design, therapeutic alliance and privacy/security within this time-frame, points to the advancements made in recent years within this field.

  16. A study of undue pain and surfing: using hierarchical criteria to assess website quality.

    PubMed

    Lorence, Daniel; Abraham, Joanna

    2008-09-01

    In studies of web-based consumer health information, scant attention has been paid to the selective development of differential methodologies for website quality evaluation, or to selective grouping and analysis of specific ;domains of uncertainty' in healthcare. Our objective is to introduce a more refined model for website evaluation, and illustrate its application using assessment of websites within an area of ongoing medical uncertainty, back pain. In this exploratory technology assessment, we suggest a model for assessing these ;domains of uncertainty' within healthcare, using qualitative assessment of websites and hierarchical concepts. Using such a hierarchy of quality criteria, we review medical information provided by the most frequently accessed websites related to back pain. Websites are evaluated using standardized criteria, with results rated from the viewpoint of the consumer. Results show that standardization of quality rating across subjective content, and between commercial and niche search results, can provide a consumer-friendly dimension to health information.

  17. AIR QUALITY CRITERIA FOR LEAD, VOLUMES 1-4. (1983) FIRST EXTERNAL REVIEW DRAFT

    EPA Science Inventory

    The document evaluates and assesses scientific information on the health and welfare effects associated with exposure to various concentrations of lead in ambient air. The literature through 1983 has been reviewed thoroughly for information relevant to air quality criteria, altho...

  18. A design procedure for the handling qualities optimization of the X-29A aircraft

    NASA Technical Reports Server (NTRS)

    Bosworth, John T.; Cox, Timothy H.

    1989-01-01

    The techniques used to improve the pitch-axis handling qualities of the X-29A wing-canard-planform fighter aircraft are reviewed. The aircraft and its FCS are briefly described, and the design method, which works within the existing FCS architecture, is characterized in detail. Consideration is given to the selection of design goals and design variables, the definition and calculation of the cost function, the validation of the mathematical model on the basis of flight-test data, and the validation of the improved design by means of nonlinear simulations. Flight tests of the improved design are shown to verify the simulation results.

  19. Evaluation of 100 brain examinations using a 3 Tesla MR-compatible incubator-safety, handling, and image quality.

    PubMed

    Sirin, Selma; Goericke, Sophia L; Huening, Britta M; Stein, Anja; Kinner, Sonja; Felderhoff-Mueser, Ursula; Schweiger, Bernd

    2013-10-01

    Several studies have revealed the importance of brain imaging in term and preterm infants. The aim of this retrospective study was to review safety, handling, and image quality of MR brain imaging using a new 3 Tesla MR-compatible incubator. Between 02/2011 and 05/2012 100 brain MRIs (84 infants, mean gestational age 32.2 ± 4.7 weeks, mean postmenstrual age at imaging 40.6 ± 3.4 weeks) were performed using a 3 Tesla MR-compatible incubator with dedicated, compatible head coil. Seventeen examinations (13 infants, mean gestational age 35.1 ± 5.4 weeks, mean postmenstrual age at imaging 47.8 ± 7.4 weeks) with a standard head coil served as a control. Image analysis was performed by a neuroradiologist and a pediatric radiologist in consensus. All but two patients with known apnea were transferred to the MR unit and scanned without problems. Handling was easier and faster with the incubator; relevant motion artifacts (5.9 vs. 10.8%) and the need for repetitive sedation (43.0 vs. 86.7%) were reduced. Considering only images not impaired by motion artifacts, image quality (4.8 ± 0.4 vs. 4.3 ± 0.8, p = 0.047) and spatial resolution (4.7 ± 0.4 vs. 4.2 ± 0.6, p = 0.011) of T2-weighted images were scored significantly higher in patients imaged with the incubator. SNR increased significantly (171.6 ± 54.5 vs. 80.5 ± 19.8, p < 0.001) with the use of the incubator. Infants can benefit from the use of a 3 Tesla MR-compatible incubator because of its safety, easier, and faster handling (compared to standard imaging) and possibility to obtain high-quality MR images even in unstable patients.

  20. SYSTEMATIC PROCESS TO SELECT CHEMICALS FOR NEW AND REVISED AMBIENT WATER QUALITY CRITERIA

    EPA Science Inventory

    The U.S. Environmental Protection Agency (EPA) publishes and periodically updates ambient water quality criteria (AWQC) for the protection of human health and aquatic life through its authority under Section 304(a) of the Clean Water Act. The number of toxic chemicals generated ...

  1. AIR QUALITY CRITERIA FOR PARTICULATE MATTER, VOLUMES I-III, (EXTERNAL REVIEW DRAFT, 1995)

    EPA Science Inventory

    There is no abstract available for these documents.

    If further information is requested, please refer to the bibliographic citation and contact the Technical Information Staff at the number listed above.

    • Air Quality Criteria for Particulate Matter, Volume I, Extern...

    • Complying with US and European complaint handling requirements.

      PubMed

      Donawa, M E

      1997-09-01

      The importance of customer complaints for providing valuable information on the use of medical devices is clearly reflected in United States (US) and European quality system requirements for handling complaints. However, there are significant differences in US and European complaint handling requirements. This article will discuss those differences and methods for ensuring compliance.

    • Coverage criteria for test case generation using UML state chart diagram

      NASA Astrophysics Data System (ADS)

      Salman, Yasir Dawood; Hashim, Nor Laily; Rejab, Mawarny Md; Romli, Rohaida; Mohd, Haslina

      2017-10-01

      To improve the effectiveness of test data generation during the software test, many studies have focused on the automation of test data generation from UML diagrams. One of these diagrams is the UML state chart diagram. Test cases are generally evaluated according to coverage criteria. However, combinations of multiple criteria are required to achieve better coverage. Different studies used various number and types of coverage criteria in their methods and approaches. The objective of this paper to propose suitable coverage criteria for test case generation using UML state chart diagram especially in handling loops. In order to achieve this objective, this work reviewed previous studies to present the most practical coverage criteria combinations, including all-states, all-transitions, all-transition-pairs, and all-loop-free-paths coverage. Calculation to determine the coverage percentage of the proposed coverage criteria were presented together with an example has they are applied on a UML state chart diagram. This finding would be beneficial in the area of test case generating especially in handling loops in UML state chart diagram.

    • U.S. recreational water quality criteria: a vision for the future

      USGS Publications Warehouse

      Fujioka, Roger S.; Solo-Gabriele, Helena M.; Byappanahalli, Muruleedhara N.; Kirs, Marek

      2015-01-01

      This manuscript evaluates the U.S. Recreational Water Quality Criteria (RWQC) of 2012, based upon discussions during a conference held 11–13 March 2013, in Honolulu, Hawaii. The RWQC of 2012 did not meet expectations among the research community because key recommended studies were not completed, new data to assess risks to bathers exposed to non-point sources of fecal indicator bacteria (FIB) were not developed, and the 2012 RWQC did not show marked improvements in strategies for assessing health risks for bathers using all types of recreational waters. The development of the 2012 RWQC was limited in scope because the epidemiologic studies at beach sites were restricted to beaches with point sources of pollution and water samples were monitored for only enterococci. The vision for the future is development of effective RWQC guidelines based on epidemiologic and quantitative microbial risk assessment (QMRA) studies for sewage specific markers, as well as human enteric pathogens so that health risks for bathers at all recreational waters can be determined. The 2012 RWQC introduced a program for states and tribes to develop site-specific water quality criteria, and in theory this approach can be used to address the limitations associated with the measurements of the traditional FIB.

    • U.S. Recreational Water Quality Criteria: A Vision for the Future

      PubMed Central

      Fujioka, Roger S.; Solo-Gabriele, Helena M.; Byappanahalli, Muruleedhara N.; Kirs, Marek

      2015-01-01

      This manuscript evaluates the U.S. Recreational Water Quality Criteria (RWQC) of 2012, based upon discussions during a conference held 11–13 March 2013, in Honolulu, Hawaii. The RWQC of 2012 did not meet expectations among the research community because key recommended studies were not completed, new data to assess risks to bathers exposed to non-point sources of fecal indicator bacteria (FIB) were not developed, and the 2012 RWQC did not show marked improvements in strategies for assessing health risks for bathers using all types of recreational waters. The development of the 2012 RWQC was limited in scope because the epidemiologic studies at beach sites were restricted to beaches with point sources of pollution and water samples were monitored for only enterococci. The vision for the future is development of effective RWQC guidelines based on epidemiologic and quantitative microbial risk assessment (QMRA) studies for sewage specific markers, as well as human enteric pathogens so that health risks for bathers at all recreational waters can be determined. The 2012 RWQC introduced a program for states and tribes to develop site-specific water quality criteria, and in theory this approach can be used to address the limitations associated with the measurements of the traditional FIB. PMID:26184253

    • 40 CFR 86.610-98 - Compliance with acceptable quality level and passing and failing criteria for Selective...

      Code of Federal Regulations, 2014 CFR

      2014-07-01

      ... level and passing and failing criteria for Selective Enforcement Audits. 86.610-98 Section 86.610-98... and passing and failing criteria for Selective Enforcement Audits. (a) The prescribed acceptable quality level is 40 percent. (b) A failed vehicle is one whose final deteriorated test results pursuant to...

    • Dynamic stability and handling qualities tests on a highly augmented, statically unstable airplane

      NASA Technical Reports Server (NTRS)

      Gera, Joseph; Bosworth, John T.

      1987-01-01

      Initial envelope clearance and subsequent flight testing of a new, fully augmented airplane with an extremely high degree of static instability can place unusual demands on the flight test approach. Previous flight test experience with these kinds of airplanes is very limited or nonexistent. The safe and efficient flight testing may be further complicated by a multiplicity of control effectors that may be present on this class of airplanes. This paper describes some novel flight test and analysis techniques in the flight dynamics and handling qualities area. These techniques were utilized during the initial flight envelope clearance of the X-29A aircraft and were largely responsible for the completion of the flight controls clearance program without any incidents or significant delays.

    • Detection of low numbers of microplastics in North Sea fish using strict quality assurance criteria.

      PubMed

      Hermsen, Enya; Pompe, Renske; Besseling, Ellen; Koelmans, Albert A

      2017-09-15

      We investigated 400 individual fish of four North Sea species: Atlantic Herring, Sprat, Common Dab, and Whiting on ingestion of >20μm microplastic. Strict quality assurance criteria were followed in order to control contamination during the study. Two plastic particles were found in only 1 (a Sprat) out of 400 individuals (0.25%, with a 95% confidence interval of 0.09-1.1%). The particles were identified to consist of polymethylmethacrylate (PMMA) through FTIR spectroscopy. No contamination occurred during the study, showing the method applied to be suitable for microplastic ingestion studies in biota. We discuss the low particle count for North Sea fish with those in other studies and suggest a relation between reported particle count and degree of quality assurance applied. Microplastic ingestion by fish may be less common than thought initially, with low incidence shown in this study, and other studies adhering to strict quality assurance criteria. Copyright © 2017 Elsevier Ltd. All rights reserved.

    • Airworthiness Qualification Criteria for Rotorcraft with External Sling Loads

      NASA Technical Reports Server (NTRS)

      Key, David L.

      2002-01-01

      This report presents the results of a study to develop airworthiness requirements for rotorcraft with external sling loads. The report starts with a review of the various phenomena that limit external sling load operations. Specifically discussed are the rotorcraft-load aeroservoelastic stability, load-on handling qualities, effects of automatic flight control system failure, load suspension system failure, and load stability at speed. Based on past experience and treatment of these phenomena, criteria are proposed to form a package for airworthiness qualification. The desired end objective is a set of operational flight envelopes for the rotorcraft with intended loads that can be provided to the user to guide operations in the field. The specific criteria proposed are parts of ADS-33E-PRF; MIL-F-9490D, and MIL-STD-913A all applied in the context of external sling loads. The study was performed for the Directorate of Engineering, U.S. Army Aviation and Missile Command (AMCOM), as part of the contract monitored by the Aerothermodynamics Directorate, U.S. Army AMCOM.

    • REVISING EPA'S GUIDELINES FOR THE DERIVATIONS OF AQUATIC LIFE AMBIENT WATER QUALITY CRITERIA

      EPA Science Inventory

      Henry, T.R., H.E. Bell, C.G. Delos, R.J. Erickson, K.M. Kubena and F.L. Mayer. In press. Revising EPA's Guidelines for the Derivation of Aquatic Life Ambient Water Quality Criteria (Abstract). To be presented at the SETAC Fourth World Congress, 14-18 November 2004, Portland, OR. ...

    • Using the Malcolm Baldrige National Quality Award in Teaching: One Criteria, Several Perspectives

      ERIC Educational Resources Information Center

      Belohlav, James A.; Cook, Lori S.; Heiser, Daniel R.

      2004-01-01

      The Malcolm Baldrige National Quality Award (MBNQA) has influenced the thinking and operations within organizations from all sectors of the American economy. This paper presents the experiences of three faculty members who have used the Criteria for Performance Excellence and the underlying concepts of the MBNQA to enhance the learning experiences…

    • New Optic Nerve Sonography Quality Criteria in the Diagnostic Evaluation of Traumatic Brain Injury

      PubMed Central

      Johnson, Garrett G. R. J.; Gillman, Lawrence M.; Faqihi, Fahad; Balhamar, Abdullah; Mahmood, Nasir Nasim; Alharthy, Abdulrahman; Lazaridis, Christos

      2018-01-01

      Background New sonographic quality criteria to optimize optic nerve sheath diameter (ONSD) measurements were suggested. The latter were correlated to elevated intracranial pressure (ICP) in traumatic brain injury (TBI). Aim We investigated whether ONSD measurements were correlated to simultaneous ICP measurements in severe TBI. Methods Forty patients with severe TBI (Marshall Scale ≥II and GCS ≤8) participated in the study. All patients had an intraparenchymal ICP catheter inserted, while ONSD was measured bilaterally, upon admission and over the next 48 hours, based on the new sonographic criteria. A total of 400 ONSD measurements were performed, while mean ONSD values of both eyes were used in the analysis. Results ONSD measurements were strongly correlated to ICP values (r=0.74, p < 0.0001). Receiver operator curve (ROC) analysis revealed that the ONSD cutoff value for predicting elevated ICP was 6.4 mm when using the mean of both eyes (AUC = 0.88, 95% CI = 0.80 to 0.95; sensitivity = 85.3%, specificity = 82.6%). Linear regression analysis nested models revealed that sex (p=0.006) and height (p=0.04) were significant predictors of ONSD values. Conclusion When applying the new sonographic quality criteria, ONSD is strongly correlated to ICP in severe TBI. Whether to use such criteria to monitor ONSD as a proxy for ICP trend in TBI remains to be further explored. PMID:29854448

    • Assessing health status and quality-of-life instruments: attributes and review criteria.

      PubMed

      Aaronson, Neil; Alonso, Jordi; Burnam, Audrey; Lohr, Kathleen N; Patrick, Donald L; Perrin, Edward; Stein, Ruth E

      2002-05-01

      The field of health status and quality of life (QoL) measurement - as a formal discipline with a cohesive theoretical framework, accepted methods, and diverse applications--has been evolving for the better part of 30 years. To identify health status and QoL instruments and review them against rigorous criteria as a precursor to creating an instrument library for later dissemination, the Medical Outcomes Trust in 1994 created an independently functioning Scientific Advisory Committee (SAC). In the mid-1990s, the SAC defined a set of attributes and criteria to carry out instrument assessments; 5 years later, it updated and revised these materials to take account of the expanding theories and technologies upon which such instruments were being developed. This paper offers the SAC's current conceptualization of eight key attributes of health status and QoL instruments (i.e., conceptual and measurement model; reliability; validity; responsiveness; interpretability; respondent and administrative burden; alternate forms; and cultural and language adaptations) and the criteria by which instruments would be reviewed on each of those attributes. These are suggested guidelines for the field to consider and debate; as measurement techniques become both more familiar and more sophisticated, we expect that experts will wish to update and refine these criteria accordingly.

    • Evaluation of Four Bedside Test Systems for Card Performance, Handling and Safety.

      PubMed

      Giebel, Felix; Picker, Susanne M; Gathof, Birgit S

      2008-01-01

      SUMMARY: OBJECTIVE: Pretransfusion ABO compatibility testing is a simple and required precaution against ABO-incompatible transfusion, which is one of the greatest threats in transfusion medicine. While distinct agglutination is most important for correct test interpretation, protection against infectious diseases and ease of handling are crucial for accurate test performance. Therefore, the aim of this study was to evaluate differences in test card design, handling, and user safety. DESIGN: Four different bedside test cards with pre-applied antibodies were evaluated by 100 medical students using packed red blood cells of different ABO blood groups. Criteria of evaluation were: agglutination, labelling, handling, and safety regarding possible user injuries. Criteria were rated subjectively according to German school notes ranging from 1 = very good to 6 = very bad/insufficient. RESULTS: Overall, all cards received very good/good marks. The ABO blood group was identified correctly in all cases. Three cards (no. 1, no. 3, no. 4) received statistically significant (p < 0.008) prominence (mean values shown) concerning clearness of agglutination (1.7-1.9 vs. 2.4 for no. 2). Systems with dried antibodies (no. 2, no. 4) outmatched the other systems with respect to overall test system performance (2.0 vs. 2.8-2.9), labelling (1.5 vs. 2.2-2.4), handling (1.9-2.0 vs. 2.5), and user safety (2.5 vs. 3.4). Analysis of card self-explanation revealed no remarkable differences. CONCLUSION: Despite good performance of all card systems tested, the best results when including all criteria evaluated were obtained with card no. 4 (particularly concerning clear agglutination), followed by cards no. 2, no. 1, and no. 3.

    • [Legal quality criteria of expert opinions in liability for medical malpractice].

      PubMed

      Neu, Johann

      2017-09-01

      In litigation regarding to liability for medical malpractice the court itself for lack of medical expert knowledge cannot judge a claimed error in treatment. That applies too for the question if there is causation between the error in treatment and claimed damage to patient's health. In this respect, the court is dependent on a medical expert and is bound to his assessment, unless there is no quality deficit in respect of medical and/or legal criteria. The more the medical expert knows the legal background of physician's liability for medical malpractice, the less is the risk of legal quality deficits in his expert opinion and thereby also of judicial errors by court. Georg Thieme Verlag KG Stuttgart · New York.

    • Investigating Criteria That Seventh Graders Use to Evaluate the Quality of Online Information

      ERIC Educational Resources Information Center

      Coiro, Julie; Coscarelli, Carla; Maykel, Cheryl; Forzani, Elena

      2015-01-01

      This article presents qualitative findings from a study that examined the types of criteria that middle school students use to evaluate the quality of online information and sources for a Web-based research assignment. Open-constructed responses from four critical evaluation items were compiled from diverse seventh graders in a representative,…

    • The influence of quality criteria on parents' evaluation of medical web-pages: an Italian randomised trial.

      PubMed

      Currò, Vincenzo; Buonuomo, Paola Sabrina; Zambiano, Annaluce; Vituzzi, Andrea; Onesimo, Roberta; D'Atri, Alessandro

      2007-01-01

      The aim of this study is to verify the usefulness for parents of a web evaluation framework composed of ten quality criteria to improve their ability to assess the quality level of medical web sites. We conducted a randomised controlled trial that included two groups of parents who independently evaluated five paediatric web sites by filling out two distinct questionnaires: group A with the evaluation framework, group B without it. 40 volunteers were recruited from parents referring to the General Paediatrics Out-patients Department who satisfied the following eligibility criteria: Internet users, at least 1 child under 12 months old, no professional skill in Internet and medicine. The survey was taken between February 2, 2000 and March 22, 2000. Parents evaluated each web site and assigned a score, compared with a gold standard created by a group of experts. Suggesting evaluation criteria to parents seem useful for an improvement of their ability to evaluate web sites.

    • Applying air pollution modelling within a multi-criteria decision analysis framework to evaluate UK air quality policies

      NASA Astrophysics Data System (ADS)

      Chalabi, Zaid; Milojevic, Ai; Doherty, Ruth M.; Stevenson, David S.; MacKenzie, Ian A.; Milner, James; Vieno, Massimo; Williams, Martin; Wilkinson, Paul

      2017-10-01

      A decision support system for evaluating UK air quality policies is presented. It combines the output from a chemistry transport model, a health impact model and other impact models within a multi-criteria decision analysis (MCDA) framework. As a proof-of-concept, the MCDA framework is used to evaluate and compare idealized emission reduction policies in four sectors (combustion in energy and transformation industries, non-industrial combustion plants, road transport and agriculture) and across six outcomes or criteria (mortality, health inequality, greenhouse gas emissions, biodiversity, crop yield and air quality legal compliance). To illustrate a realistic use of the MCDA framework, the relative importance of the criteria were elicited from a number of stakeholders acting as proxy policy makers. In the prototype decision problem, we show that reducing emissions from industrial combustion (followed very closely by road transport and agriculture) is more advantageous than equivalent reductions from the other sectors when all the criteria are taken into account. Extensions of the MCDA framework to support policy makers in practice are discussed.

    • Analysis of flexible aircraft longitudinal dynamics and handling qualities. Volume 2: Data

      NASA Technical Reports Server (NTRS)

      Waszak, M. R.; Schmidt, D. K.

      1985-01-01

      Two analysis methods are applied to a family of flexible aircraft in order to investigate how and when structural (especially dynamic aeroelastic) effects affect the dynamic characteristics of aircraft. The first type of analysis is an open loop modal analysis technique. This method considers the effect of modal residue magnitudes on determining vehicle handling qualities. The second method is a pilot in the loop analysis procedure that considers several closed loop system characteristics. Both analyses indicated that dynamic aeroelastic effects caused a degradation in vehicle tracking performance, based on the evaluation of some simulation results. Volume 2 consists of the presentation of the state variable models of the flexible aircraft configurations used in the analysis applications mode shape plots for the structural modes, numerical results from the modal analysis frequency response plots from the pilot in the loop analysis and a listing of the modal analysis computer program.

    • A computational framework for converting textual clinical diagnostic criteria into the quality data model.

      PubMed

      Hong, Na; Li, Dingcheng; Yu, Yue; Xiu, Qiongying; Liu, Hongfang; Jiang, Guoqian

      2016-10-01

      Constructing standard and computable clinical diagnostic criteria is an important but challenging research field in the clinical informatics community. The Quality Data Model (QDM) is emerging as a promising information model for standardizing clinical diagnostic criteria. To develop and evaluate automated methods for converting textual clinical diagnostic criteria in a structured format using QDM. We used a clinical Natural Language Processing (NLP) tool known as cTAKES to detect sentences and annotate events in diagnostic criteria. We developed a rule-based approach for assigning the QDM datatype(s) to an individual criterion, whereas we invoked a machine learning algorithm based on the Conditional Random Fields (CRFs) for annotating attributes belonging to each particular QDM datatype. We manually developed an annotated corpus as the gold standard and used standard measures (precision, recall and f-measure) for the performance evaluation. We harvested 267 individual criteria with the datatypes of Symptom and Laboratory Test from 63 textual diagnostic criteria. We manually annotated attributes and values in 142 individual Laboratory Test criteria. The average performance of our rule-based approach was 0.84 of precision, 0.86 of recall, and 0.85 of f-measure; the performance of CRFs-based classification was 0.95 of precision, 0.88 of recall and 0.91 of f-measure. We also implemented a web-based tool that automatically translates textual Laboratory Test criteria into the QDM XML template format. The results indicated that our approaches leveraging cTAKES and CRFs are effective in facilitating diagnostic criteria annotation and classification. Our NLP-based computational framework is a feasible and useful solution in developing diagnostic criteria representation and computerization. Copyright © 2016 Elsevier Inc. All rights reserved.

  1. Mars Sample Handling Protocol Workshop Series

    NASA Technical Reports Server (NTRS)

    Rummel, John D. (Editor); Race, Margaret S. (Editor); Acevedo, Sara (Technical Monitor)

    2000-01-01

    This document is the report resulting from the first workshop of the series on development of the criteria for a Mars sample handling protocol. Workshop 1 was held in Bethesda, Maryland on March 20-22, 2000. This report serves to document the proceedings of Workshop 1; it summarizes relevant background information, provides an overview of the deliberations to date, and helps frame issues that will need further attention or resolution in upcoming workshops. Specific recommendations are not part of this report.

  2. Review: A Position Paper on Selenium in Ecotoxicology: A Procedure for Deriving Site-Specific Water Quality Criteria

    Treesearch

    A. Dennis Lemly

    1997-01-01

    This paper describes a method for deriving site-specific water quality criteria for selenium using a two-step process: (1) gather information on selenium residues and biological effects at the site and in down-gradient systems and (2) examine criteria based on the degree of bioaccumulation, the relationship between mea-sured residues and threshold concentrations for...

  3. AIR QUALITY CRITERIA FOR PARTICULATE MATTER (FOURTH EXTERNAL REVIEW DRAFT) [REVISED CHAPTERS 7, 8, AND 9, JUNE 2004

    EPA Science Inventory

    EPA is in the process of updating and revising, where appropriate, its Air Quality Criteria for Particulate Matter as issued in 1996 (usually referred to as the Criteria Document). Sections 108 and 109 of the Clean Air Act require that EPA carry out a periodic review and revisio...

  4. 10 CFR Appendix B to Part 50 - Quality Assurance Criteria for Nuclear Power Plants and Fuel Reprocessing Plants

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... 10 Energy 1 2011-01-01 2011-01-01 false Quality Assurance Criteria for Nuclear Power Plants and... LICENSING OF PRODUCTION AND UTILIZATION FACILITIES Pt. 50, App. B Appendix B to Part 50—Quality Assurance... report a description of the quality assurance program to be applied to the design, fabrication...

  5. Ride quality criteria and the design process. [standards for ride comfort

    NASA Technical Reports Server (NTRS)

    Ravera, R. J.

    1975-01-01

    Conceptual designs for advanced ground transportation systems often hinge on obtaining acceptable vehicle ride quality while attempting to keep the total guideway cost (initial and subsequent maintenance) as low as possible. Two ride quality standards used extensively in work sponsored by the U.S. Department of Transportation (DOT) are the DOT-Urban Tracked Air Cushion Vehicle (UTACV) standard and the International Standards Organization (ISO) reduced ride comfort criteria. These standards are reviewed and some of the deficiencies, which become apparent when trying to apply them in practice, are noted. Through the use of a digital simulation, the impact of each of these standards on an example design process is examined. It is shown that meeting the ISO specification for the particular vehicle/guideway case investigated is easier than meeting the UTACV standard.

  6. Fact Sheet: Revised Draft Ambient Water Quality Criteria Document for Atrazine and Request for Scientific Views

    EPA Pesticide Factsheets

    Documents pertaining to Acute and Chronic Ambient Water Quality Aquatic Life Criteria for Atrazine (Freshwater and Salt Water) and revised Ecological Fate and Effects Risk Assessment for Atrazine. (Fact Sheet)

  7. 40 CFR 132.3 - Adoption of criteria.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... with: (a) The acute water quality criteria for protection of aquatic life in Table 1 of this part, or a... chronic water quality criteria for protection of aquatic life in Table 2 of this part, or a site-specific... QUALITY GUIDANCE FOR THE GREAT LAKES SYSTEM § 132.3 Adoption of criteria. The Great Lakes States and...

  8. 40 CFR 132.3 - Adoption of criteria.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... with: (a) The acute water quality criteria for protection of aquatic life in Table 1 of this part, or a... chronic water quality criteria for protection of aquatic life in Table 2 of this part, or a site-specific... QUALITY GUIDANCE FOR THE GREAT LAKES SYSTEM § 132.3 Adoption of criteria. The Great Lakes States and...

  9. 40 CFR 132.3 - Adoption of criteria.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... with: (a) The acute water quality criteria for protection of aquatic life in Table 1 of this part, or a... chronic water quality criteria for protection of aquatic life in Table 2 of this part, or a site-specific... QUALITY GUIDANCE FOR THE GREAT LAKES SYSTEM § 132.3 Adoption of criteria. The Great Lakes States and...

  10. 40 CFR 132.3 - Adoption of criteria.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... with: (a) The acute water quality criteria for protection of aquatic life in Table 1 of this part, or a... chronic water quality criteria for protection of aquatic life in Table 2 of this part, or a site-specific... QUALITY GUIDANCE FOR THE GREAT LAKES SYSTEM § 132.3 Adoption of criteria. The Great Lakes States and...

  11. The Sternberg Task as a Workload Metric in Flight Handling Qualities Research

    NASA Technical Reports Server (NTRS)

    Hemingway, J. C.

    1984-01-01

    The objective of this research was to determine whether the Sternberg item-recognition task, employed as a secondary task measure of spare mental capacity for flight handling qualities (FHQ) simulation research, could help to differentiate between different flight-control conditions. FHQ evaluations were conducted on the Vertical Motion Simulator at Ames Research Center to investigate different primary flight-control configurations, and selected stability and control augmentation levels for helicopers engaged in low-level flight regimes. The Sternberg task was superimposed upon the primary flight-control task in a balanced experimental design. The results of parametric statistical analysis of Sternberg secondary task data failed to support the continued use of this task as a measure of pilot workload. In addition to the secondary task, subjects provided Cooper-Harper pilot ratings (CHPR) and responded to a workload questionnaire. The CHPR data also failed to provide reliable statistical discrimination between FHQ treatment conditions; some insight into the behavior of the secondary task was gained from the workload questionnaire data.

  12. Water quality criteria for colored smokes: Solvent Yellow 33, Final report. [Contains glossary

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Davidson, K.A.; Hovatter, P.S.

    1987-11-01

    The available data on the environmental fate, aquatic toxicity, and mammalian toxicity of Solvent Yellow 33, a quinoline dye used in colored smoke grenades, were reviewed. The US Environmental Protection Agency (USEPA) guidelines were used in an attempt to generate water quality criteria for the protection of aquatic life and its use and of human health. 87 refs., 2 figs., 13 tabs.

  13. HOPE: An On-Line Piloted Handling Qualities Experiment Data Book

    NASA Technical Reports Server (NTRS)

    Jackson, E. B.; Proffitt, Melissa S.

    2010-01-01

    A novel on-line database for capturing most of the information obtained during piloted handling qualities experiments (either flight or simulated) is described. The Hyperlinked Overview of Piloted Evaluations (HOPE) web application is based on an open-source object-oriented Web-based front end (Ruby-on-Rails) that can be used with a variety of back-end relational database engines. The hyperlinked, on-line data book approach allows an easily-traversed way of looking at a variety of collected data, including pilot ratings, pilot information, vehicle and configuration characteristics, test maneuvers, and individual flight test cards and repeat runs. It allows for on-line retrieval of pilot comments, both audio and transcribed, as well as time history data retrieval and video playback. Pilot questionnaires are recorded as are pilot biographies. Simple statistics are calculated for each selected group of pilot ratings, allowing multiple ways to aggregate the data set (by pilot, by task, or by vehicle configuration, for example). Any number of per-run or per-task metrics can be captured in the database. The entire run metrics dataset can be downloaded in comma-separated text for further analysis off-line. It is expected that this tool will be made available upon request

  14. Utilizing Depth of Colonization of Seagrasses to Develop Numeric Water Quality Criteria for Florida Estuaries

    EPA Science Inventory

    US EPA is working with state and local partners in Florida to develop numeric water quality criteria to protect estuaries from nutrient pollution. Similar to other nutrient management programs in Florida, EPA is considering status of seagrass habitats as an indicator of biologic...

  15. Handling Qualities Evaluations of Low Complexity Model Reference Adaptive Controllers for Reduced Pitch and Roll Damping Scenarios

    NASA Technical Reports Server (NTRS)

    Hanson, Curt; Schaefer, Jacob; Burken, John J.; Johnson, Marcus; Nguyen, Nhan

    2011-01-01

    National Aeronautics and Space Administration (NASA) researchers have conducted a series of flight experiments designed to study the effects of varying levels of adaptive controller complexity on the performance and handling qualities of an aircraft under various simulated failure or damage conditions. A baseline, nonlinear dynamic inversion controller was augmented with three variations of a model reference adaptive control design. The simplest design consisted of a single adaptive parameter in each of the pitch and roll axes computed using a basic gradient-based update law. A second design was built upon the first by increasing the complexity of the update law. The third and most complex design added an additional adaptive parameter to each axis. Flight tests were conducted using NASA s Full-scale Advanced Systems Testbed, a highly modified F-18 aircraft that contains a research flight control system capable of housing advanced flight controls experiments. Each controller was evaluated against a suite of simulated failures and damage ranging from destabilization of the pitch and roll axes to significant coupling between the axes. Two pilots evaluated the three adaptive controllers as well as the non-adaptive baseline controller in a variety of dynamic maneuvers and precision flying tasks designed to uncover potential deficiencies in the handling qualities of the aircraft, and adverse interactions between the pilot and the adaptive controllers. The work was completed as part of the Integrated Resilient Aircraft Control Project under NASA s Aviation Safety Program.

  16. 10 CFR 32.23 - Same: Safety criteria.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 10 Energy 1 2010-01-01 2010-01-01 false Same: Safety criteria. 32.23 Section 32.23 Energy NUCLEAR REGULATORY COMMISSION SPECIFIC DOMESTIC LICENSES TO MANUFACTURE OR TRANSFER CERTAIN ITEMS CONTAINING..., shielding, or other safety features of the product from wear and abuse likely to occur in normal handling...

  17. 10 CFR 32.27 - Same: Safety criteria.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 10 Energy 1 2010-01-01 2010-01-01 false Same: Safety criteria. 32.27 Section 32.27 Energy NUCLEAR REGULATORY COMMISSION SPECIFIC DOMESTIC LICENSES TO MANUFACTURE OR TRANSFER CERTAIN ITEMS CONTAINING..., shielding, or other safety features of the product from wear and abuse likely to occur in normal handling...

  18. Quality of laboratory studies assessing effects of Bt-proteins on non-target organisms: minimal criteria for acceptability.

    PubMed

    De Schrijver, Adinda; Devos, Yann; De Clercq, Patrick; Gathmann, Achim; Romeis, Jörg

    2016-08-01

    The potential risks that genetically modified plants may pose to non-target organisms and the ecosystem services they contribute to are assessed as part of pre-market risk assessments. This paper reviews the early tier studies testing the hypothesis whether exposure to plant-produced Cry34/35Ab1 proteins as a result of cultivation of maize 59122 is harmful to valued non-target organisms, in particular Arthropoda and Annelida. The available studies were assessed for their scientific quality by considering a set of criteria determining their relevance and reliability. As a case-study, this exercise revealed that when not all quality criteria are met, weighing the robustness of the study and its relevance for risk assessment is not obvious. Applying a worst-case expected environmental concentration of bioactive toxins equivalent to that present in the transgenic crop, confirming exposure of the test species to the test substance, and the use of a negative control were identified as minimum criteria to be met to guarantee sufficiently reliable data. This exercise stresses the importance of conducting studies meeting certain quality standards as this minimises the probability of erroneous or inconclusive results and increases confidence in the results and adds certainty to the conclusions drawn.

  19. Air Quality Criteria for Particulate Matter (Fourth External Review Draft) [revised Drafts of Chapters 7 and 8, December 2003

    EPA Science Inventory

    EPA is in the process of updating and revising, where appropriate, its Air Quality Criteria for Particulate Matter as issued in 1996 (usually referred to as the Criteria Document). Sections 108 and 109 of the Clean Air Act require that EPA carry out a periodic review an...

  20. The development and potential of inverse simulation for the quantitative assessment of helicopter handling qualities

    NASA Technical Reports Server (NTRS)

    Bradley, Roy; Thomson, Douglas G.

    1993-01-01

    In this paper it is proposed that inverse simulation can make a positive contribution to the study of handling qualities. It is shown that mathematical descriptions of the MTEs (Mission Task Elements) defined in ADS-33C may be used to drive an inverse simulation thereby generating, from an appropriate mathematical model, the controls and states of a subject helicopter flying it. By presenting the results of such simulations it is shown that, in the context of inverse simulation, the attitude quickness parameters given in ADS-33C are independent of vehicle configuration. An alternative quickness parameter, associated with the control displacements required to fly the MTE is proposed, and some preliminary results are presented.

  1. Outcomes after repair of chronic bucket-handle tears of medial meniscus.

    PubMed

    Espejo-Reina, Alejandro; Serrano-Fernández, José Miguel; Martín-Castilla, Belén; Estades-Rubio, Francisco Javier; Briggs, Karen K; Espejo-Baena, Alejandro

    2014-04-01

    The purpose of this study was to determine the outcomes after repair of chronic bucket-handle medial meniscal tears by use of magnetic resonance imaging, clinical examination, and patient-reported outcomes. A retrospective review of patients with chronic bucket-handle medial meniscal tears that had been repaired with meniscal sutures was undertaken. The following criteria for inclusion were adopted: minimum tear length of 2 cm and chronic medial meniscal tear identified at the time of arthroscopy. The tears were susceptible to dislocation with probing. Data collected included demographic, clinical, radiologic, and surgical data. Postoperative healing was assessed with the clinical criteria of Barrett et al. The International Knee Documentation Committee rating, Lysholm score, and Tegner activity level were determined, and postoperative magnetic resonance imaging was used to evaluate healing in accordance with the criteria of Henning et al. Twenty-four patients fulfilled the inclusion criteria. The mean time from injury to surgery was 10 months (range, 2 to 60 months). Sixteen patients underwent anterior cruciate ligament reconstruction, 1 patient underwent posterior cruciate ligament reconstruction, and 6 patients underwent meniscus repair only. A median of 5 sutures (range, 3 to 6 sutures) were used for repair. Four cases (all of which had undergone meniscus repair only) required revision. Complete healing was achieved in 83% of cases according to the criteria of Barrett et al. The mean follow-up time was 48 months (range, 24 to 112 months). An International Knee Documentation Committee rating of A or B was achieved in the 20 patients who did not require revision. The median Lysholm score was 95 (range, 92 to 100). The median Tegner activity level before injury was 7, and it remained unchanged after surgery in all cases. This study showed that repair of chronic bucket-handle meniscal tears can lead to good clinical outcomes and a relatively low (17

  2. Longitudinal handling qualities during approach and landing of a powered lift STOL aircraft

    NASA Technical Reports Server (NTRS)

    Franklin, J. A.; Innis, R. C.

    1972-01-01

    Longitudinal handling qualities evaluations were conducted on the Ames Research Center Flight Simulator for Advanced Aircraft (FSAA) for the approach and landing tasks of a powered lift STOL research aircraft. The test vehicle was a C-8A aircraft modified with a new wing incorporating internal blowing over an augmentor flap. The investigation included: (1) use of various flight path and airspeed control techniques for the basic vehicle; (2) assessment of stability and command augmentation schemes for pitch attitude and airspeed control; (3) determination of the influence of longitudinal and vertical force coupling for the power control; (4) determination of the influence of pitch axis coupling with the thrust vector control; and (5) evaluations of the contribution of stability and command augmentation to recovery from a single engine failure. Results are presented in the form of pilot ratings and commentary substantiated by landing approach time histories.

  3. Criteria for clinical audit of the quality of hospital-based obstetric care in developing countries.

    PubMed Central

    Graham, W.; Wagaarachchi, P.; Penney, G.; McCaw-Binns, A.; Antwi, K. Y.; Hall, M. H.

    2000-01-01

    Improving the quality of obstetric care is an urgent priority in developing countries, where maternal mortality remains high. The feasibility of criterion-based clinical audit of the assessment and management of five major obstetric complications is being studied in Ghana and Jamaica. In order to establish case definitions and clinical audit criteria, a systematic review of the literature was followed by three expert panel meetings. A modified nominal group technique was used to develop consensus among experts on a final set of case definitions and criteria. Five main obstetric complications were selected and definitions were agreed. The literature review led to the identification of 67 criteria, and the panel meetings resulted in the modification and approval of 37 of these for the next stage of audit. Criterion-based audit, which has been devised and tested primarily in industrialized countries, can be adapted and applied where resources are poorer. The selection of audit criteria for such settings requires local expert opinion to be considered in addition to research evidence, so as to ensure that the criteria are realistic in relation to conditions in the field. Practical methods for achieving this are described in the present paper. PMID:10859855

  4. An approach to developing numeric water quality criteria for coastal waters using the SeaWiFS Satellite Data Record.

    PubMed

    Schaeffer, Blake A; Hagy, James D; Conmy, Robyn N; Lehrter, John C; Stumpf, Richard P

    2012-01-17

    Human activities on land increase nutrient loads to coastal waters, which can increase phytoplankton production and biomass and associated ecological impacts. Numeric nutrient water quality standards are needed to protect coastal waters from eutrophication impacts. The Environmental Protection Agency determined that numeric nutrient criteria were necessary to protect designated uses of Florida's waters. The objective of this study was to evaluate a reference condition approach for developing numeric water quality criteria for coastal waters, using data from Florida. Florida's coastal waters have not been monitored comprehensively via field sampling to support numeric criteria development. However, satellite remote sensing had the potential to provide adequate data. Spatial and temporal measures of SeaWiFS OC4 chlorophyll-a (Chl(RS)-a, mg m(-3)) were resolved across Florida's coastal waters between 1997 and 2010 and compared with in situ measurements. Statistical distributions of Chl(RS)-a were evaluated to determine a quantitative reference baseline. A binomial approach was implemented to consider how new data could be assessed against the criteria. The proposed satellite remote sensing approach to derive numeric criteria may be generally applicable to other coastal waters.

  5. An Approach to Developing Numeric Water Quality Criteria for Coastal Waters Using the SeaWiFS Satellite Data Record

    PubMed Central

    2011-01-01

    Human activities on land increase nutrient loads to coastal waters, which can increase phytoplankton production and biomass and associated ecological impacts. Numeric nutrient water quality standards are needed to protect coastal waters from eutrophication impacts. The Environmental Protection Agency determined that numeric nutrient criteria were necessary to protect designated uses of Florida’s waters. The objective of this study was to evaluate a reference condition approach for developing numeric water quality criteria for coastal waters, using data from Florida. Florida’s coastal waters have not been monitored comprehensively via field sampling to support numeric criteria development. However, satellite remote sensing had the potential to provide adequate data. Spatial and temporal measures of SeaWiFS OC4 chlorophyll-a (ChlRS-a, mg m–3) were resolved across Florida’s coastal waters between 1997 and 2010 and compared with in situ measurements. Statistical distributions of ChlRS-a were evaluated to determine a quantitative reference baseline. A binomial approach was implemented to consider how new data could be assessed against the criteria. The proposed satellite remote sensing approach to derive numeric criteria may be generally applicable to other coastal waters. PMID:22192062

  6. Water Quality Criteria for Copper Based on the BLM Approach in the Freshwater in China

    PubMed Central

    Zhang, Yahui; Zang, Wenchao; Qin, Lumei; Zheng, Lei; Cao, Ying; Yan, Zhenguang; Yi, Xianliang; Zeng, Honghu; Liu, Zhengtao

    2017-01-01

    The bioavailability and toxicity of metals to aquatic organisms are highly dependent on water quality parameters in freshwaters. The biotic ligand model (BLM) for copper is an approach to generate the water quality criteria (WQC) with water chemistry in the ambient environment. However, few studies were carried out on the WQCs for copper based on the BLM approach in China. In the present study, the toxicity for copper to native Chinese aquatic organisms was conducted and the published toxicity data with water quality parameters to Chinese aquatic species were collected to derive the WQCs for copper by the BLM approach. The BLM-based WQCs (the criterion maximum criteria (CMC) and the criterion continuous concentration (CCC)) for copper in the freshwater for the nation and in the Taihu Lake were obtained. The CMC and CCC values for copper in China were derived to be 1.391 μg/L and 0.495 μg/L, respectively, and the CMC and CCC in the Taihu Lake were 32.194 μg/L and 9.697 μg/L. The high concentration of dissolved organic carbon might be a main reason which resulted in the higher WQC values in the Taihu Lake. The WQC of copper in the freshwater would provide a scientific foundation for water quality standards and the environment risk assessment in China. PMID:28166229

  7. Ride quality criteria. [transportation system interior and passenger response to environment

    NASA Technical Reports Server (NTRS)

    Stephens, D. G.

    1977-01-01

    Ride quality refers to the interior or passenger environment of a transportation system as well as the passenger response to the environment. Ride quality factors are illustrated with the aid of a diagram presenting inputs to vehicle, the vehicle transfer function, the ride environment, the passenger response function, and the passenger ride response. The reported investigation considers the ride environment as measured on a variety of air and surface vehicles, the passenger response to the environment as determined from laboratory and field surveys, and criteria/standards for vibration, noise, and combined stimuli. Attention is given to the vertical vibration characteristics in cruise for aircraft and automobile, the aircraft vibration levels for various operating regimes, comparative noise levels during cruise, the discomfort level for a 9 Hz sinusoidal vibration, equal discomfort contours for vertical vibration, subjective response to noise in a speech situation, and noise and vibration levels for constant discomfort contours.

  8. Guidelines for safe handling of hazardous drugs: A systematic review

    PubMed Central

    Bernabeu-Martínez, Mari A.; Ramos Merino, Mateo; Santos Gago, Juan M.; Álvarez Sabucedo, Luis M.; Wanden-Berghe, Carmina

    2018-01-01

    Objective To review the scientific literature related to the safe handling of hazardous drugs (HDs). Method Critical analysis of works retrieved from MEDLINE, the Cochrane Library, Scopus, CINHAL, Web of Science and LILACS using the terms "Hazardous Substances", "Antineoplastic Agents" and "Cytostatic Agents", applying "Humans" and "Guidelines" as filters. Date of search: January 2017. Results In total, 1100 references were retrieved, and from those, 61 documents were selected based on the inclusion and exclusion criteria: 24 (39.3%) documents related to recommendations about HDs; 27 (44.3%) about antineoplastic agents, and 10 (33.3%) about other types of substances (monoclonal antibodies, gene medicine and other chemical and biological agents). In 14 (23.3%) guides, all the stages in the manipulation process involving a risk due to exposure were considered. Only one guide addressed all stages of the handling process of HDs (including stages with and without the risk of exposure). The most described stages were drug preparation (41 guides, 67.2%), staff training and/or patient education (38 guides, 62.3%), and administration (37 guides, 60.7%). No standardized informatics system was found that ensured quality management, traceability and minimization of the risks associated with these drugs. Conclusions Most of the analysed guidelines limit their recommendations to the manipulation of antineoplastics. The most frequently described activities were preparation, training, and administration. It would be convenient to apply ICTs (Information and Communications Technologies) to manage processes involving HDs in a more complete and simpler fashion. PMID:29750798

  9. Guidelines for safe handling of hazardous drugs: A systematic review.

    PubMed

    Bernabeu-Martínez, Mari A; Ramos Merino, Mateo; Santos Gago, Juan M; Álvarez Sabucedo, Luis M; Wanden-Berghe, Carmina; Sanz-Valero, Javier

    2018-01-01

    To review the scientific literature related to the safe handling of hazardous drugs (HDs). Critical analysis of works retrieved from MEDLINE, the Cochrane Library, Scopus, CINHAL, Web of Science and LILACS using the terms "Hazardous Substances", "Antineoplastic Agents" and "Cytostatic Agents", applying "Humans" and "Guidelines" as filters. Date of search: January 2017. In total, 1100 references were retrieved, and from those, 61 documents were selected based on the inclusion and exclusion criteria: 24 (39.3%) documents related to recommendations about HDs; 27 (44.3%) about antineoplastic agents, and 10 (33.3%) about other types of substances (monoclonal antibodies, gene medicine and other chemical and biological agents). In 14 (23.3%) guides, all the stages in the manipulation process involving a risk due to exposure were considered. Only one guide addressed all stages of the handling process of HDs (including stages with and without the risk of exposure). The most described stages were drug preparation (41 guides, 67.2%), staff training and/or patient education (38 guides, 62.3%), and administration (37 guides, 60.7%). No standardized informatics system was found that ensured quality management, traceability and minimization of the risks associated with these drugs. Most of the analysed guidelines limit their recommendations to the manipulation of antineoplastics. The most frequently described activities were preparation, training, and administration. It would be convenient to apply ICTs (Information and Communications Technologies) to manage processes involving HDs in a more complete and simpler fashion.

  10. Construction of a Learning Agent Handling Its Rewards According to Environmental Situations

    NASA Astrophysics Data System (ADS)

    Moriyama, Koichi; Numao, Masayuki

    The authors aim at constructing an agent which learns appropriate actions in a Multi-Agent environment with and without social dilemmas. For this aim, the agent must have nonrationality that makes it give up its own profit when it should do that. Since there are many studies on rational learning that brings more and more profit, it is desirable to utilize them for constructing the agent. Therefore, we use a reward-handling manner that makes internal evaluation from the agent's rewards, and then the agent learns actions by a rational learning method with the internal evaluation. If the agent has only a fixed manner, however, it does not act well in the environment with and without dilemmas. Thus, the authors equip the agent with several reward-handling manners and criteria for selecting an effective one for the environmental situation. In the case of humans, what generates the internal evaluation is usually called emotion. Hence, this study also aims at throwing light on emotional activities of humans from a constructive view. In this paper, we divide a Multi-Agent environment into three situations and construct an agent having the reward-handling manners and the criteria. We observe that the agent acts well in all the three Multi-Agent situations composed of homogeneous agents.

  11. Cottonseed air-handling and storage requirements

    USDA-ARS?s Scientific Manuscript database

    In addition to lint, cottonseed is an additional product of the cotton plant that accounts for 15 to 25 percent of the crop value. Due to the value of the cottonseed, proper handling, storage, and aeration are critical for maintaining seed quality and minimizing spoilage. Over the last few decades,...

  12. Assessing the Quality of Academic Libraries on the Web: The Development and Testing of Criteria.

    ERIC Educational Resources Information Center

    Chao, Hungyune

    2002-01-01

    This study develops and tests an instrument useful for evaluating the quality of academic library Web sites. Discusses criteria for print materials and human-computer interfaces; user-based perspectives; the use of factor analysis; a survey of library experts; testing reliability through analysis of variance; and regression models. (Contains 53…

  13. Race to the Top District Competition: The Data Quality Campaign's Comments on ED's Proposed Criteria

    ERIC Educational Resources Information Center

    Data Quality Campaign, 2012

    2012-01-01

    The Data Quality Campaign (DQC) submits these comments in response to the US Department of Education's (ED) draft requirements, priorities, selection criteria, and definitions for the Race to the Top District (RTT-D) competition. DQC applauds ED for including the following components of the proposal: (1) Data is acknowledged throughout the…

  14. 40 CFR 132.3 - Adoption of criteria.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ...) The acute water quality criteria for protection of aquatic life in Table 1 of this part, or a site... water quality criteria for protection of aquatic life in Table 2 of this part, or a site-specific....3 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) WATER PROGRAMS WATER QUALITY...

  15. An analytical study of electric vehicle handling dynamics

    NASA Technical Reports Server (NTRS)

    Greene, J. E.; Segal, D. J.

    1979-01-01

    Hypothetical electric vehicle configurations were studied by applying available analytical methods. Elementary linearized models were used in addition to a highly sophisticated vehicle dynamics computer simulation technique. Physical properties of specific EV's were defined for various battery and powertrain packaging approaches applied to a range of weight distribution and inertial properties which characterize a generic class of EV's. Computer simulations of structured maneuvers were performed for predicting handling qualities in the normal driving range and during various extreme conditions related to accident avoidance. Results indicate that an EV with forward weight bias will possess handling qualities superior to a comparable EV that is rear-heavy or equally balanced. The importance of properly matching tires, suspension systems, and brake system front/rear torque proportioning to a given EV configuration during the design stage is demonstrated.

  16. Towards an evaluation framework for information quality management (IQM) practices for health information systems--evaluation criteria for effective IQM practices.

    PubMed

    Mohammed, Siti Asma; Yusof, Maryati Mohd

    2013-04-01

    Poor information quality (IQ) must be understood as a business problem rather than systems problem. In health care organization, what is required is an effective quality management that continuously manages and reviews the factors influencing IQ in health information systems (HIS) so as to achieve the desired outcomes. Hence, in order to understand the issues of information quality management (IQM) practices in health care organizations, a more holistic evaluation study should be undertaken to investigate the IQM practices in health care organizations. It is the aim of this paper to identify the significant evaluation criteria that influence the production of good IQ in HIS. Six selected frameworks and best practices both from health informatics and information systems literature have been reviewed to identify the evaluation criteria from the perspective of human, organizational and technological factors. From the review, it was found that human and organization factors are of greater significance in influencing HIS IQ. Our review depicts that there is still shortage in finding a comprehensive IQM evaluation framework. Thus, the criteria from the frameworks reviewed can be used in combination for more comprehensive evaluation criteria. Integrated IQM evaluation criteria for HIS are then proposed in this study. Poor IQ is the result of complex interdependency within sociotechnical factors in health care organization and lack of formal and structured IQM practices. Thus, a feedback mechanism such as evaluation is needed to understand the issues in depth in the future. © 2012 Blackwell Publishing Ltd.

  17. Quality management of clinical-practical instruction for Practical Year medical students in Germany - proposal for a catalogue of criteria from the German Society of Medical Education.

    PubMed

    Raes, Patricia; Angstwurm, Matthias; Berberat, Pascal; Kadmon, Martina; Rotgans, Jerome; Streitlein-Böhme, Irmgard; Burckhardt, Gerhard; Fischer, Martin R

    2014-01-01

    Amended in 2013, the current version of the German Medical Licensure Regulation contains structural specifications that are also required of non-university institutions involved in Practical Year clinical training. The criteria are worded in relatively general terms. Furthermore, not all of the structural specifications can be readily applied to every subject area. In order to ensure commensurability in Practical Year instruction in Germany, not least in light of recently introduced Practical Year mobility, it is necessary to define consistent quality criteria for Practical Year training. The authors therefore propose a catalogue of criteria for the quality management process in Practical Year instruction facilities. In January 2014, the board of directors of the German Society for Medical Education decided to establish a committee comprised of representatives from various German medical faculties. In a process similar to the Delphi methodology, the group developed criteria for structure, process and outcome quality in Practical Year training in Germany. The criteria developed for structure, process and outcome quality apply to Practical Year training in academic teaching hospitals and university medical centres. Furthermore, modalities for review are proposed. The present catalogue of criteria is intended to contribute to the formation of a basis for the most consistent quality standards possible for Practical Year instruction in Germany.

  18. Operational military helicopter interior noise and vibration measurements with comparisons to ride quality criteria

    NASA Technical Reports Server (NTRS)

    Clevenson, S. A.; Leatherwood, J. D.; Hollenbaugh, D. D.

    1983-01-01

    Balka (1981) has identified the attainment of a 'jet-smooth' ride as a primary goal of the helicopter industry for commercial and certain military helicopters. It was noted that criteria accounting for both multiple axis vibration and interior noise are needed. The present investigation has the objective to present a vibration and interior noise data base in a format suitable for direct evaluation of aircraft ride quality. The investigation is also concerned with an assessment of the measured environment against available criteria as an indication of the state-of-the-art for current machines. Interior noise and vibration measurements were obtained on eight military helicopters during routine operational flights. The data are presented in the form of a number of parameters.

  19. Getting a Handle on Academic Quality

    ERIC Educational Resources Information Center

    Massy, William F.; Graham, Steven W.; Short, Paula Myrick

    2007-01-01

    The quality of teaching, more than ever, is seen as the all-important results area for colleges and universities. Few board members would dispute the importance of teaching or their responsibility for exercising oversight over its quality and continuous improvement. Yet there is little consensus about how to accomplish such oversight. Few board…

  20. Formulation of image quality prediction criteria for the Viking lander camera

    NASA Technical Reports Server (NTRS)

    Huck, F. O.; Jobson, D. J.; Taylor, E. J.; Wall, S. D.

    1973-01-01

    Image quality criteria are defined and mathematically formulated for the prediction computer program which is to be developed for the Viking lander imaging experiment. The general objective of broad-band (black and white) imagery to resolve small spatial details and slopes is formulated as the detectability of a right-circular cone with surface properties of the surrounding terrain. The general objective of narrow-band (color and near-infrared) imagery to observe spectral characteristics if formulated as the minimum detectable albedo variation. The general goal to encompass, but not exceed, the range of the scene radiance distribution within single, commandable, camera dynamic range setting is also considered.

  1. Adverse risk: a 'dynamic interaction model of patient moving and handling'.

    PubMed

    Griffiths, Howard

    2012-09-01

    The aim of the present study was to examine patient adverse events associated with sub-optimal patient moving and handling. Few studies have examined the patient's perspective on adverse risk during manual handling episodes. A narrative review was undertaken to develop the 'Dynamic Interaction Model of Patient Moving and Handling' in an orthopaedic rehabilitation setting, using peer-reviewed publications published in English between 1992 and 2010. Five predominant themes emerged from the narrative review: 'patient's need to know about analgesics prior to movement/ambulation'; 'comfort care'; 'mastery of and acceptance of mobility aids/equipment'; 'psychological adjustment to fear of falling'; and 'the need for movement to prevent tissue pressure damage'. Prevalence of discomfort, pain, falls, pressure sores together with a specific Direct Instrument Nursing Observation (DINO) tool enable back care advisers to measure quality of patient manual handling. Evaluation of patients' use of mobility aids together with fear of falling may be important in determining patients' recovery trajectory. Clinical governance places a responsibility on nurse managers to consider quality of care for their service users. 'Dynamic Interaction Model of Nurse-Patient Moving and Handling' provides back care advisers, clinical risk managers and occupational health managers with an alternative perspective to clinical risk and occupational risk. © 2011 Blackwell Publishing Ltd.

  2. 76 FR 14351 - Proposed Withdrawal of Certain Federal Aquatic Life Water Quality Criteria Applicable to Wisconsin

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-03-16

    ... limits in National Pollutant Discharge Elimination System (NPDES) permits, and may affect Clean Water Act... approves revised numeric water quality criteria applicable to the Great Lakes System, thereby meeting the...'s basis for this decision is that Limited Aquatic Life waters only support an invertebrate community...

  3. Water Quality Criteria, Report of the National Technical Advisory Committee to the Secretary of the Interior.

    ERIC Educational Resources Information Center

    Department of the Interior, Washington, DC. Federal Water Pollution Control Administration.

    Contained are reports of five subcommittees of the National Technical Advisory Committee on Water Quality Criteria. Subcommittees were recreation and aesthetics; public water supplies; fish, other aquatic life, and wildlife; agricultural uses; and industrial water supplies. Each committee report contains discussion of the problem area, criteria…

  4. 40 CFR 89.510 - Compliance with acceptable quality level and passing and failing criteria for selective...

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 40 Protection of Environment 20 2011-07-01 2011-07-01 false Compliance with acceptable quality level and passing and failing criteria for selective enforcement audits. 89.510 Section 89.510... EMISSIONS FROM NEW AND IN-USE NONROAD COMPRESSION-IGNITION ENGINES Selective Enforcement Auditing § 89.510...

  5. System Proposal for Mass Transit Service Quality Control Based on GPS Data

    PubMed Central

    Padrón, Gabino; Cristóbal, Teresa; Alayón, Francisco; Quesada-Arencibia, Alexis; García, Carmelo R.

    2017-01-01

    Quality is an essential aspect of public transport. In the case of regular public passenger transport by road, punctuality and regularity are criteria used to assess quality of service. Calculating metrics related to these criteria continuously over time and comprehensively across the entire transport network requires the handling of large amounts of data. This article describes a system for continuously and comprehensively monitoring punctuality and regularity. The system uses location data acquired continuously in the vehicles and automatically transferred for analysis. These data are processed intelligently by elements that are commonly used by transport operators: GPS-based tracking system, onboard computer and wireless networks for mobile data communications. The system was tested on a transport company, for which we measured the punctuality of one of the routes that it operates; the results are presented in this article. PMID:28621745

  6. System Proposal for Mass Transit Service Quality Control Based on GPS Data.

    PubMed

    Padrón, Gabino; Cristóbal, Teresa; Alayón, Francisco; Quesada-Arencibia, Alexis; García, Carmelo R

    2017-06-16

    Quality is an essential aspect of public transport. In the case of regular public passenger transport by road, punctuality and regularity are criteria used to assess quality of service. Calculating metrics related to these criteria continuously over time and comprehensively across the entire transport network requires the handling of large amounts of data. This article describes a system for continuously and comprehensively monitoring punctuality and regularity. The system uses location data acquired continuously in the vehicles and automatically transferred for analysis. These data are processed intelligently by elements that are commonly used by transport operators: GPS-based tracking system, onboard computer and wireless networks for mobile data communications. The system was tested on a transport company, for which we measured the punctuality of one of the routes that it operates; the results are presented in this article.

  7. Evaluation of hygiene practices and microbiological quality of cooked meat products during slicing and handling at retail.

    PubMed

    Pérez-Rodríguez, F; Castro, R; Posada-Izquierdo, G D; Valero, A; Carrasco, E; García-Gimeno, R M; Zurera, G

    2010-10-01

    Cooked meat ready-to-eat products are recognized to be contaminated during slicing which, in the last years, has been associated with several outbreaks. This work aimed to find out possible relation between the hygiene practice taking place at retail point during slicing of cooked meat products in small and medium-sized establishments (SMEs) and large-sized establishments (LEs) and the microbiological quality of sliced cooked meat products. For that, a checklist was drawn up and filled in based on scoring handling practice during slicing in different establishments in Cordoba (Southern Spain). In addition, sliced cooked meats were analyzed for different microbiological indicators and investigated for the presence of Listeria spp. and Listeria monocytogenes. Results indicated that SMEs showed a more deficient handling practices compared to LEs. In spite of these differences, microbiological counts indicated similar microbiological quality in cooked meat samples for both types of establishments. On the other hand, Listeria monocytogenes and Listeria inocua were isolated from 7.35% (5/68) and 8.82% (6/68) of analyzed samples, respectively. Positive samples for Listeria spp. were found in establishments which showed acceptable hygiene levels, though contamination could be associated to the lack of exclusiveness of slicers at retail points. Moreover, Listeria spp presence could not be statistically linked to any microbiological parameters; however, it was observed that seasonality influenced significantly (P<0.05) L. monocytogenes presence, being all samples found during warm season (5/5). As a conclusion, results suggested that more effort should be made to adequately educate handlers in food hygiene practices, focused specially on SMEs. Copyright (c) 2010 Elsevier B.V. All rights reserved.

  8. Performance criteria and quality indicators for the post-analytical phase.

    PubMed

    Sciacovelli, Laura; Aita, Ada; Padoan, Andrea; Pelloso, Michela; Antonelli, Giorgia; Piva, Elisa; Chiozza, Maria Laura; Plebani, Mario

    2016-07-01

    Quality indicators (QIs) used as performance measurements are an effective tool in accurately estimating quality, identifying problems that may need to be addressed, and monitoring the processes over time. In Laboratory Medicine, QIs should cover all steps of the testing process, as error studies have confirmed that most errors occur in the pre- and post-analytical phase of testing. Aim of the present study is to provide preliminary results on QIs and related performance criteria in the post-analytical phase. This work was conducted according to a previously described study design based on the voluntary participation of clinical laboratories in the project on QIs of the Working Group "Laboratory Errors and Patient Safety" (WG-LEPS) of the International Federation of Clinical Chemistry and Laboratory Medicine (IFCC). Overall, data collected highlighted an improvement or stability in performances over time for all reported indicators thus demonstrating that the use of QIs is effective in the quality improvement strategy. Moreover, QIs data are an important source for defining the state-of-the-art concerning the error rate in the total testing process. The definition of performance specifications based on the state-of-the-art, as suggested by consensus documents, is a valuable benchmark point in evaluating the performance of each laboratory. Laboratory tests play a relevant role in the monitoring and evaluation of the efficacy of patient outcome thus assisting clinicians in decision-making. Laboratory performance evaluation is therefore crucial to providing patients with safe, effective and efficient care.

  9. Assessing regional environmental quality by integrated use of remote sensing, GIS, and spatial multi-criteria evaluation for prioritization of environmental restoration.

    PubMed

    Rahman, Md Rejaur; Shi, Z H; Chongfa, Cai

    2014-11-01

    This study was an attempt to analyse the regional environmental quality with the application of remote sensing, geographical information system, and spatial multiple criteria decision analysis and, to project a quantitative method applicable to identify the status of the regional environment of the study area. Using spatial multi-criteria evaluation (SMCE) approach with expert knowledge in this study, an integrated regional environmental quality index (REQI) was computed and classified into five levels of regional environment quality viz. worse, poor, moderate, good, and very good. During the process, a set of spatial criteria were selected (here, 15 criterions) together with the degree of importance of criteria in sustainability of the regional environment. Integrated remote sensing and GIS technique and models were applied to generate the necessary factors (criterions) maps for the SMCE approach. The ranking, along with expected value method, was used to standardize the factors and on the other hand, an analytical hierarchy process (AHP) was applied for calculating factor weights. The entire process was executed in the integrated land and water information system (ILWIS) software tool that supports SMCE. The analysis showed that the overall regional environmental quality of the area was at moderate level and was partly determined by elevation. Areas under worse and poor quality of environment indicated that the regional environmental status showed decline in these parts of the county. The study also revealed that the human activities, vegetation condition, soil erosion, topography, climate, and soil conditions have serious influence on the regional environment condition of the area. Considering the regional characteristics of environmental quality, priority, and practical needs for environmental restoration, the study area was further regionalized into four priority areas which may serve as base areas of decision making for the recovery, rebuilding, and

  10. Reducing Mouse Anxiety during Handling: Effect of Experience with Handling Tunnels

    PubMed Central

    Gouveia, Kelly; Hurst, Jane L.

    2013-01-01

    Handling stress is a well-recognised source of variation in animal studies that can also compromise the welfare of research animals. To reduce background variation and maximise welfare, methods that minimise handling stress should be developed and used wherever possible. Recent evidence has shown that handling mice by a familiar tunnel that is present in their home cage can minimise anxiety compared with standard tail handling. As yet, it is unclear whether a tunnel is required in each home cage to improve response to handling. We investigated the influence of prior experience with home tunnels among two common strains of laboratory mice: ICR(CD-1) and C57BL/6. We compared willingness to approach the handler and anxiety in an elevated plus maze test among mice picked up by the tail, by a home cage tunnel or by an external tunnel shared between cages. Willingness to interact with the handler was much greater for mice handled by a tunnel, even when this was unfamiliar, compared to mice picked up by the tail. Once habituated to handling, C57BL/6 mice were most interactive towards a familiar home tunnel, whereas the ICR strain showed strong interaction with all tunnel handling regardless of any experience of a home cage tunnel. Mice handled by a home cage or external tunnel showed less anxiety in an elevated plus maze than those picked up by the tail. This study shows that using a tunnel for routine handling reduces anxiety among mice compared to tail handling regardless of prior familiarity with tunnels. However, as home cage tunnels can further improve response to handling in some mice, we recommend that mice are handled with a tunnel provided in their home cage where possible as a simple practical method to minimise handling stress. PMID:23840458

  11. Reducing mouse anxiety during handling: effect of experience with handling tunnels.

    PubMed

    Gouveia, Kelly; Hurst, Jane L

    2013-01-01

    Handling stress is a well-recognised source of variation in animal studies that can also compromise the welfare of research animals. To reduce background variation and maximise welfare, methods that minimise handling stress should be developed and used wherever possible. Recent evidence has shown that handling mice by a familiar tunnel that is present in their home cage can minimise anxiety compared with standard tail handling. As yet, it is unclear whether a tunnel is required in each home cage to improve response to handling. We investigated the influence of prior experience with home tunnels among two common strains of laboratory mice: ICR(CD-1) and C57BL/6. We compared willingness to approach the handler and anxiety in an elevated plus maze test among mice picked up by the tail, by a home cage tunnel or by an external tunnel shared between cages. Willingness to interact with the handler was much greater for mice handled by a tunnel, even when this was unfamiliar, compared to mice picked up by the tail. Once habituated to handling, C57BL/6 mice were most interactive towards a familiar home tunnel, whereas the ICR strain showed strong interaction with all tunnel handling regardless of any experience of a home cage tunnel. Mice handled by a home cage or external tunnel showed less anxiety in an elevated plus maze than those picked up by the tail. This study shows that using a tunnel for routine handling reduces anxiety among mice compared to tail handling regardless of prior familiarity with tunnels. However, as home cage tunnels can further improve response to handling in some mice, we recommend that mice are handled with a tunnel provided in their home cage where possible as a simple practical method to minimise handling stress.

  12. Data Quality Screening Service

    NASA Technical Reports Server (NTRS)

    Strub, Richard; Lynnes, Christopher; Hearty, Thomas; Won, Young-In; Fox, Peter; Zednik, Stephan

    2013-01-01

    A report describes the Data Quality Screening Service (DQSS), which is designed to help automate the filtering of remote sensing data on behalf of science users. Whereas this process often involves much research through quality documents followed by laborious coding, the DQSS is a Web Service that provides data users with data pre-filtered to their particular criteria, while at the same time guiding the user with filtering recommendations of the cognizant data experts. The DQSS design is based on a formal semantic Web ontology that describes data fields and the quality fields for applying quality control within a data product. The accompanying code base handles several remote sensing datasets and quality control schemes for data products stored in Hierarchical Data Format (HDF), a common format for NASA remote sensing data. Together, the ontology and code support a variety of quality control schemes through the implementation of the Boolean expression with simple, reusable conditional expressions as operands. Additional datasets are added to the DQSS simply by registering instances in the ontology if they follow a quality scheme that is already modeled in the ontology. New quality schemes are added by extending the ontology and adding code for each new scheme.

  13. An Overview of Controls and Flying Qualities Technology on the F/A-18 High Alpha Research Vehicle

    NASA Technical Reports Server (NTRS)

    Pahle, Joseph W.; Wichman, Keith D.; Foster, John V.; Bundick, W. Thomas

    1996-01-01

    The NASA F/A-18 High Alpha Research Vehicle (HARV) has been the flight test bed of a focused technology effort to significantly increase maneuvering capability at high angles of attack. Development and flight test of control law design methodologies, handling qualities metrics, performance guidelines, and flight evaluation maneuvers are described. The HARV has been modified to include two research control effectors, thrust vectoring, and actuated forebody strakes in order to provide increased control power at high angles of attack. A research flight control system has been used to provide a flexible, easily modified capability for high-angle-of-attack research controls. Different control law design techniques have been implemented and flight-tested, including eigenstructure assignment, variable gain output feedback, pseudo controls, and model-following. Extensive piloted simulation has been used to develop nonlinear performance guide-lines and handling qualities criteria for high angles of attack. This paper reviews the development and evaluation of technologies useful for high-angle-of-attack control. Design, development, and flight test of the research flight control system, control laws, flying qualities specifications, and flight test maneuvers are described. Flight test results are used to illustrate some of the lessons learned during flight test and handling qualities evaluations.

  14. [Quality criteria for scientific collections within medical associations: the collections of the German Urological Association fullfill high requirements].

    PubMed

    Moll, F H; Rathert, P; Fangerau, H

    2013-12-01

    Quality criteria are necessary for the evaluation and rating of scientific collections of medical associations and are necessary for their development in order to argue within the scientific community or with other relevant actors.

  15. 76 FR 79176 - Notice of Availability of Draft Recreational Water Quality Criteria and Request for Scientific Views

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-12-21

    ... ENVIRONMENTAL PROTECTION AGENCY [EPA-OW-2011-0466; FRL-9609-3] Notice of Availability of Draft Recreational Water Quality Criteria and Request for Scientific Views AGENCY: Environmental Protection Agency... Environmental Protection Agency (EPA) is announcing the availability of the draft document Recreational Water...

  16. Approach to developing numeric water quality criteria for coastal waters: a transition from SeaWiFS to MODIS and MERIS satellites.

    EPA Science Inventory

    Human activities on land increase nutrient loads to coastal waters, which can increase phytoplankton production and biomass and potentially cause harmful ecological effects. States can adopt numeric water quality criteria into their water quality standards to protect the designa...

  17. Developing a workstation-based, real-time simulation for rapid handling qualities evaluations during design

    NASA Technical Reports Server (NTRS)

    Anderson, Frederick; Biezad, Daniel J.

    1994-01-01

    This paper describes the Rapid Aircraft DynamIcs AssessmeNt (RADIAN) project - an integration of the Aircraft SYNThesis (ACSTNT) design code with the USAD DATCOM code that estimates stability derivatives. Both of these codes are available to universities. These programs are then linked to flight simulation and flight controller synthesis tools and resulting design is evaluated on a graphics workstation. The entire process reduces the preliminary design time by an order of magnitude and provides an initial handling qualities evaluation of the design coupled to a control law. The integrated design process is applicable to both conventional aircraft taken from current textbooks and to unconventional designs emphasizing agility and propulsive control of attitude. The interactive and concurrent nature of the design process has been well received by industry and by design engineers at NASA. The process is being implemented into the design curriculum and is being used by students who view it as a significant advance over prior methods.

  18. The AQC Baldrige Report. Lessons Learned by Nine Colleges and Universities Undertaking Self-Study with the Malcolm Baldrige National Quality Award Criteria.

    ERIC Educational Resources Information Center

    Seymour, Daniel

    This report summarized observations of administrators at nine colleges in the Academic Quality Consortium (AQC) who assessed the performance of their institutions using the Malcolm Baldrige criteria as a guideline. These criteria include leadership, information and analysis, strategic planning, human resource development and management, management…

  19. High angle of attack flying qualities criteria for longitudinal rate command systems

    NASA Technical Reports Server (NTRS)

    Wilson, David J.; Citurs, Kevin D.; Davidson, John B.

    1994-01-01

    This study was designed to investigate flying qualities requirements of alternate pitch command systems for fighter aircraft at high angle of attack. Flying qualities design guidelines have already been developed for angle of attack command systems at 30, 45, and 60 degrees angle of attack, so this research fills a similar need for rate command systems. Flying qualities tasks that require post-stall maneuvering were tested during piloted simulations in the McDonnell Douglas Aerospace Manned Air Combat Simulation facility. A generic fighter aircraft model was used to test angle of attack rate and pitch rate command systems for longitudinal gross acquisition and tracking tasks at high angle of attack. A wide range of longitudinal dynamic variations were tested at 30, 45, and 60 degrees angle of attack. Pilot comments, Cooper-Harper ratings, and pilot induced oscillation ratings were taken from five pilots from NASA, USN, CAF, and McDonnell Douglas Aerospace. This data was used to form longitudinal design guidelines for rate command systems at high angle of attack. These criteria provide control law design guidance for fighter aircraft at high angle of attack, low speed flight conditions. Additional time history analyses were conducted using the longitudinal gross acquisition data to look at potential agility measures of merit and correlate agility usage to flying qualities boundaries. This paper presents an overview of this research.

  20. Research and Development for Health and Environmental Hazard Assessment. Task Order 1. Development of Data Base Requirements for Human Health Based Water Quality Criteria for Military Recycle/Reuse Applications.

    DTIC Science & Technology

    1980-06-01

    Environmental Hazard Assessment -. .’.’ASK ORDER I j EVELOPMENT OF DATA BASE REQUIREMENTS I . .oR HUMAN HEALTH BASED WATER QUALITY CRITERIA | COR MILITARY...Requirements for Human Sep a -1979- June 89 Health Based Water Quality Criteria for Military -%4,o ER Reevcle/ Reuse Applications Is 8_ 3.7𔃾__=1_...KEY WORDS (Continue on reverse aide If neceseary and Identify by block number) Water Reuse, Water Recycle, Water Quality Criteria, Human Health

  1. Derivation of freshwater quality criteria for zinc using interspecies correlation estimation models to protect aquatic life in China.

    PubMed

    Feng, C L; Wu, F C; Dyer, S D; Chang, H; Zhao, X L

    2013-01-01

    Species sensitivity distributions (SSDs) are usually used in the development of water quality criteria and require a large number of toxicity values to define a hazard level to protect the majority of species. However, some toxicity data for certain chemicals are limited, especially for endangered and threatened species. Thus, it is important to predict the unknown species toxicity data using available toxicity data. To address this need, interspecies correlation estimation (ICE) models were developed by US EPA to predict acute toxicity of chemicals to diverse species based on a more limited data set of surrogate species toxicity data. Use of SSDs generated from ICE models allows for the prediction of protective water quality criteria, such as the HC5 (hazard concentration, 5th percentile). In the present study, we tested this concept using toxicity data collected for zinc. ICE-based-SSDs were generated using three surrogate species (common carp (Cyprinus carpio), rainbow trout (Oncorhynchus mykiss), and Daphnia magna) and compared with the measured-based SSD and corresponding HC5. The results showed that no significant differences were observed between the ICE- and the measured-based SSDs and HC5s. Furthermore, the examination of species placements within the SSDs indicated that the most sensitive species to zinc were invertebrates, especially crustaceans. Given the similarity of SSD and HC5s for zinc, the use of ICE to derive potential water quality criteria for diverse chemicals in China is proposed. Further, a combination of measured and ICE-derived data will prove useful for assessing water quality and chemical risks in the near future. Copyright © 2012 Elsevier Ltd. All rights reserved.

  2. Methods for Environments and Contaminants: Criteria Air Pollutants

    EPA Pesticide Factsheets

    EPA’s Office of Air Quality Planning and Standards (OAQPS) has set primary (health-based) National Ambient Air Quality Standards (NAAQS) for six common air pollutants, often referred to as criteria air pollutants (or simply criteria pollutants).

  3. Sprag Handle Wrenches

    NASA Technical Reports Server (NTRS)

    Vranishm, John M.

    2010-01-01

    Sprag handle wrenches have been proposed for general applications in which conventional pawl-and-ratchet wrenches and sprag and cam "clickless" wrenches are now used. Sprag handle wrenches are so named because they would include components that would function both as parts of handles and as sprags (roller locking/unlocking components). In comparison with all of the aforementioned conventional wrenches, properly designed sprag handle wrenches could operate with much less backlash; in comparison with the conventional clickless wrenches, sprag handle wrenches could be stronger and less expensive (because the sprags would be larger and more easily controllable than are conventional sprags and cams).

  4. 40 CFR Appendix A to Part 132 - Great Lakes Water Quality Initiative Methodologies for Development of Aquatic Life Criteria and...

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... LAKES SYSTEM Pt. 132, App. A Appendix A to Part 132—Great Lakes Water Quality Initiative Methodologies... 40 Protection of Environment 21 2010-07-01 2010-07-01 false Great Lakes Water Quality Initiative Methodologies for Development of Aquatic Life Criteria and Values A Appendix A to Part 132 Protection of...

  5. 40 CFR Appendix A to Part 132 - Great Lakes Water Quality Initiative Methodologies for Development of Aquatic Life Criteria and...

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... LAKES SYSTEM Pt. 132, App. A Appendix A to Part 132—Great Lakes Water Quality Initiative Methodologies... 40 Protection of Environment 22 2011-07-01 2011-07-01 false Great Lakes Water Quality Initiative Methodologies for Development of Aquatic Life Criteria and Values A Appendix A to Part 132 Protection of...

  6. Development of water quality criteria of ammonia for protecting aquatic life in freshwater using species sensitivity distribution method.

    PubMed

    Park, Tae-Jin; Lee, Jong-Hyeon; Lee, Myung-Sung; Park, Chang-Hee; Lee, Chang-Hoon; Moon, Seong-Dae; Chung, Jiwoong; Cui, Rongxue; An, Youn-Joo; Yeom, Dong-Hyuk; Lee, Soo-Hyung; Lee, Jae-Kwan; Zoh, Kyung-Duk

    2018-09-01

    Ammonia is deemed one of the most important pollutants in the freshwater environment because of its highly toxic nature and ubiquity in surface water. This study thus aims to derive the criteria for ammonia in freshwater to protect aquatic life because there are no water quality criteria for ammonia in Korea. Short-term lethal tests were conducted to perform the species sensitivity distribution (SSD) method. This method is widely used in ecological risk assessment to determine the chemical concentrations to protect aquatic species. Based on the species sensitivity distribution method using Korean indigenous aquatic biota, the hazardous concentration for 5% of biological species (HC 5 ) value calculated in this study was 44mg/L as total ammonia nitrogen (TAN). The value of the assessment factor was set at 2. Consequently, the criteria for ammonia were derived as 22mg/L at pH7 and 20°C. When the derived value was applied to the monitoring data nationwide, 0.51%, 0.09%, 0.18%, 0.20%, and 0.35% of the monitoring sites in Han River, Nakdong River, Geum River, Youngsan River, and lakes throughout the nation, respectively, exceeded this criteria. The Ministry of Environment in Korea has been considering introducing water quality standard of ammonia for protecting aquatic life. Therefore, our results can provide the basis for introducing the ammonia standard in Korea. Copyright © 2018 Elsevier B.V. All rights reserved.

  7. Strategies for Meeting High Standards: Quality Management and the Baldrige Criteria in Education. Lessons from the States.

    ERIC Educational Resources Information Center

    Barth, John; Burk, Zona Sharp; Serfass, Richard; Harms, Barbara Ann; Houlihan, G. Thomas; Anderson, Gerald; Farley, Raymond P.; Rigsby, Ken; O'Rourke, John

    This document, one of a series of reports, focuses on the adoption of principles of quality management, originally developed by W. Edwards Deming, and the Baldrige Criteria for use in education. These processes and tools for systemic organizational management, when comprehensively applied, produce performance excellence and continuous improvement.…

  8. Angelica sinensis (Oliv.) Diels: Influence of Value Chain on Quality Criteria and Marker Compounds Ferulic Acid and Z-Ligustilide.

    PubMed

    Giacomelli, Nino; Yongping, Yang; Huber, Franz K; Ankli, Anita; Weckerle, Caroline S

    2017-03-14

    Background: Dang gui (Apiaceae; Angelica sinensis radix) is among the most often used Chinese medicinal plants. However, hardly anything is known about its value chain and its influence on the main marker compounds of the drug. The aim of this study is to investigate the value chain of dang gui in Gansu and Yunnan, and the analysis of the marker compounds ferulic acid and Z-ligustilide concentration in relation to quality criteria such as the production area and size of the roots. Methods: During six months of field research in China, semi-structured interviews with various stakeholders of the value chain were undertaken and plant material was collected. High-performance thin layer chromatography (HPTLC) was used for semi-quantitative analysis of ferulic acid and Z-ligustilide. Results: Small-scale household cultivation prevails and in Gansu-in contrast to Yunnan-the cultivation of dang gui is often the main income source of farmers. Farmers and dealers use size and odor of the root as main quality criteria. For Chinese medicine doctors, Gansu as the production area is the main criterion. Higher amounts of ferulic acid in plant material from Yunnan compared to Gansu were found. Additionally, a negative relation of root length with both ferulic acid and Z-ligustilide as well as head diameter with ferulic acid were found. Conclusions: HPTLC is a valid method for semi-quantitative analysis of the marker compounds of dang gui . However, the two main marker compounds cannot explain why size and smell of the root or production area are seen as quality criteria. This hints at the inherent difficulty to correlate quality notions of medicinal plants with specific chemical compounds. With respect to this, more attention should be paid to quality in terms of cultivation and processing techniques.

  9. Estimation of Handling Qualities Parameters of the Tu-144 Supersonic Transport Aircraft from Flight Test Data

    NASA Technical Reports Server (NTRS)

    Curry, Timothy J.; Batterson, James G. (Technical Monitor)

    2000-01-01

    Low order equivalent system (LOES) models for the Tu-144 supersonic transport aircraft were identified from flight test data. The mathematical models were given in terms of transfer functions with a time delay by the military standard MIL-STD-1797A, "Flying Qualities of Piloted Aircraft," and the handling qualities were predicted from the estimated transfer function coefficients. The coefficients and the time delay in the transfer functions were estimated using a nonlinear equation error formulation in the frequency domain. Flight test data from pitch, roll, and yaw frequency sweeps at various flight conditions were used for parameter estimation. Flight test results are presented in terms of the estimated parameter values, their standard errors, and output fits in the time domain. Data from doublet maneuvers at the same flight conditions were used to assess the predictive capabilities of the identified models. The identified transfer function models fit the measured data well and demonstrated good prediction capabilities. The Tu-144 was predicted to be between level 2 and 3 for all longitudinal maneuvers and level I for all lateral maneuvers. High estimates of the equivalent time delay in the transfer function model caused the poor longitudinal rating.

  10. The Action Competence Approach and the "New" Discourses of Education for Sustainable Development, Competence and Quality Criteria

    ERIC Educational Resources Information Center

    Mogensen, Finn; Schnack, Karsten

    2010-01-01

    Action competence has been a key concept in educational circles in Denmark since the 1980s. This paper explores the relationship between the action competence approach and recent discourses of education for sustainable development (ESD), competence and quality criteria. First we argue that action competence is an educational ideal, referring to…

  11. Ground-based and in-flight simulator studies of low-speed handling characteristics of two supersonic cruise transport concepts

    NASA Technical Reports Server (NTRS)

    Grantham, W. D.; Nguyen, L. T.; Deal, P. L.; Neubauer, M. J.; Smith, P. M.; Gregory, F. D.

    1978-01-01

    Conventional and powered lift concepts for supersonic approach and landing tasks are considered. Results indicated that the transport concepts had unacceptable low-speed handling qualities with no augmentation, and that in order to achieve satisfactory handling qualities, considerable augmentation was required. The available roll-control power was acceptable for the powered-lift concept.

  12. Consumer evaluation of complaint handling in the Dutch health insurance market

    PubMed Central

    2011-01-01

    Background How companies deal with complaints is a particularly challenging aspect in managing the quality of their service. In this study we test the direct and relative effects of service quality dimensions on consumer complaint satisfaction evaluations and trust in a company in the Dutch health insurance market. Methods A cross-sectional survey design was used. Survey data of 150 members of a Dutch insurance panel who lodged a complaint at their healthcare insurer within the past 12 months were surveyed. The data were collected using a questionnaire containing validated multi-item measures. These measures assess the service quality dimensions consisting of functional quality and technical quality and consumer complaint satisfaction evaluations consisting of complaint satisfaction and overall satisfaction with the company after complaint handling. Respondents' trust in a company after complaint handling was also measured. Using factor analysis, reliability and validity of the measures were assessed. Regression analysis was used to examine the relationships between these variables. Results Overall, results confirm the hypothesized direct and relative effects between the service quality dimensions and consumer complaint satisfaction evaluations and trust in the company. No support was found for the effect of technical quality on overall satisfaction with the company. This outcome might be driven by the context of our study; namely, consumers get in touch with a company to resolve a specific problem and therefore might focus more on complaint satisfaction and less on overall satisfaction with the company. Conclusions Overall, the model we present is valid in the context of the Dutch health insurance market. Management is able to increase consumers' complaint satisfaction, overall satisfaction with the company, and trust in the company by improving elements of functional and technical quality. Furthermore, we show that functional and technical quality do not

  13. Consumer evaluation of complaint handling in the Dutch health insurance market.

    PubMed

    Wendel, Sonja; de Jong, Judith D; Curfs, Emile C

    2011-11-15

    How companies deal with complaints is a particularly challenging aspect in managing the quality of their service. In this study we test the direct and relative effects of service quality dimensions on consumer complaint satisfaction evaluations and trust in a company in the Dutch health insurance market. A cross-sectional survey design was used. Survey data of 150 members of a Dutch insurance panel who lodged a complaint at their healthcare insurer within the past 12 months were surveyed. The data were collected using a questionnaire containing validated multi-item measures. These measures assess the service quality dimensions consisting of functional quality and technical quality and consumer complaint satisfaction evaluations consisting of complaint satisfaction and overall satisfaction with the company after complaint handling. Respondents' trust in a company after complaint handling was also measured. Using factor analysis, reliability and validity of the measures were assessed. Regression analysis was used to examine the relationships between these variables. Overall, results confirm the hypothesized direct and relative effects between the service quality dimensions and consumer complaint satisfaction evaluations and trust in the company. No support was found for the effect of technical quality on overall satisfaction with the company. This outcome might be driven by the context of our study; namely, consumers get in touch with a company to resolve a specific problem and therefore might focus more on complaint satisfaction and less on overall satisfaction with the company. Overall, the model we present is valid in the context of the Dutch health insurance market. Management is able to increase consumers' complaint satisfaction, overall satisfaction with the company, and trust in the company by improving elements of functional and technical quality. Furthermore, we show that functional and technical quality do not influence consumer satisfaction evaluations and

  14. Evaluation of low-energy contrast-enhanced spectral mammography images by comparing them to full-field digital mammography using EUREF image quality criteria.

    PubMed

    Lalji, U C; Jeukens, C R L P N; Houben, I; Nelemans, P J; van Engen, R E; van Wylick, E; Beets-Tan, R G H; Wildberger, J E; Paulis, L E; Lobbes, M B I

    2015-10-01

    Contrast-enhanced spectral mammography (CESM) examination results in a low-energy (LE) and contrast-enhanced image. The LE appears similar to a full-field digital mammogram (FFDM). Our aim was to evaluate LE CESM image quality by comparing it to FFDM using criteria defined by the European Reference Organization for Quality Assured Breast Screening and Diagnostic Services (EUREF). A total of 147 cases with both FFDM and LE images were independently scored by two experienced radiologists using these (20) EUREF criteria. Contrast detail measurements were performed using a dedicated phantom. Differences in image quality scores, average glandular dose, and contrast detail measurements between LE and FFDM were tested for statistical significance. No significant differences in image quality scores were observed between LE and FFDM images for 17 out of 20 criteria. LE scored significantly lower on one criterion regarding the sharpness of the pectoral muscle (p < 0.001), and significantly better on two criteria on the visualization of micro-calcifications (p = 0.02 and p = 0.034). Dose and contrast detail measurements did not reveal any physical explanation for these observed differences. Low-energy CESM images are non-inferior to FFDM images. From this perspective FFDM can be omitted in patients with an indication for CESM. • Low-energy CESM images are non-inferior to FFDM images. • Micro-calcifications are significantly more visible on LE CESM than on FFDM. • There is no physical explanation for this improved visibility of micro-calcifications. • There is no need for an extra FFDM when CESM is indicated.

  15. The effects of pilot stress factors on handling quality assessments during US/German helicopter agility flight tests

    NASA Technical Reports Server (NTRS)

    Pausder, H. J.; Gerdes, R. M.

    1982-01-01

    Flight tests were conducted with two helicopters to study and evaluate the effects of helicopter characteristics and pilot and task demands on performance in nap-of-the-Earth flight. Different, low-level slalom courses were set up and were flown by three pilots with different levels of flight experience. A pilot rating questionnaire was used to obtain redundant information and to gain more insight into factors that influence pilot ratings. The flight test setups and procedures are described, and the pilot ratings are summarized and interpreted in close connection with the analyzed test data. Pilot stress is discussed. The influence of demands on the pilot, of the helicopter characteristics, and of other stress factors are outlined with particular emphasis on how these factors affect handling-qualities assessment.

  16. A Summary and Evaluation of Aquatic Environmental Data in Relation to Establishing Water Quality Criteria for Munitions-Unique Compounds. Part 4: RDX and HMX.

    DTIC Science & Technology

    1979-03-01

    AD-AO87 683 WATER AND AIR RESEARCH INC GAINESVILLE FL F/6 13/2 SUMMARY AND EVALUATION OF AQUATIC ENVIRONMENTAL DATA IN RELAT-ETC(U) MAR 79 J H...F1 ’ " LII r , N \\I .<A -U AND EVALUATION OF AQUATIC ENVIRONMENTAL DATA IN RELATION TO ESTABLISHING WATER QUALITY CRITERIA FOR MUNITIONS-UNIQUE... aquatic environment and t water quality criteria for the protection of aquatic organisms1 Vt- ,., Chemical properties, analytical methods

  17. Statistical Framework for Recreational Water Quality Criteria and Monitoring

    EPA Science Inventory

    Discussion between the EPA Office of Research and Development (ORD) and the EPA Office of Water (OW), which is charged with setting criteria in accordance with the BEACH Act of 2000, have made it clear that in-depth statistical guidance for such criteria is needed. In January 20...

  18. National Recommended Water Quality Criteria - Organoleptic Effects

    EPA Pesticide Factsheets

    These criteria are based on organoleptic (taste and odor) effects. Because of variations in chemical nomenclature systems, this listing of pollutants does not duplicate the listing in Appendix A of 40 CFR Part 423.

  19. Effect of Handling, Storage and Cycling on Ni-H2 Cells: Second Plateau Phenomenon

    NASA Technical Reports Server (NTRS)

    Vaidyanathan, Hari; Rao, Gopalakrishna M.; Day, John H. (Technical Monitor)

    2000-01-01

    A viewgraph presentation outlines the effects of handling, storing, and cycling of NiH2 cells, particularly the second plateau phenomenon. Details are given on the criteria for cell selection, cell history, the second plateau capacity at C/2 discharge, and cell reversal test conditions. Tables display a gas analysis and nickel precharge.

  20. Postproduction Handling and Administration of Protein Pharmaceuticals and Potential Instability Issues.

    PubMed

    Nejadnik, M Reza; Randolph, Theodore W; Volkin, David B; Schöneich, Christian; Carpenter, John F; Crommelin, Daan J A; Jiskoot, Wim

    2018-04-14

    The safety and efficacy of protein pharmaceuticals depend not only on biological activity but also on purity levels. Impurities may be process related because of limitations in manufacturing or product related because of protein degradation occurring throughout the life history of a product. Although the pharmaceutical biotechnology industry has made great progress in improving bulk and drug product manufacturing as well as company-controlled storage and transportation conditions to minimize the level of degradation, there is less control over the many factors that may subsequently affect product quality after the protein pharmaceuticals are released and shipped by the manufacturer. Routine handling or unintentional mishandling of therapeutic protein products may cause protein degradation that remains unnoticed but can potentially compromise the clinical safety and efficacy of the product. In this commentary, we address some potential risks associated with (mis)handling of protein pharmaceuticals after release by the manufacturer. We summarize the environmental stress factors that have been shown to cause protein degradation and that may be encountered during typical handling procedures of protein pharmaceuticals in a hospital setting or during self-administration by patients. Moreover, we provide recommendations for improvements in product handling to help ensure the quality of protein pharmaceuticals during use. Copyright © 2018 American Pharmacists Association®. Published by Elsevier Inc. All rights reserved.

  1. Handling and restraint.

    PubMed

    Donovan, John; Brown, Patricia

    2006-07-01

    For the safety of the handler and the animal, proper methods for handling and restraining laboratory animals should be followed. Improper handling can result in increased stress and injury to the animal. In addition, the handler risks injury from bite wounds or scratches inflicted when the animal becomes fearful or anxious. By using sure, direct movements with a determined attitude, the animal can be easily handled and restrained. Animals can be restrained either manually or in a plastic restrainer. The protocols in this unit describe handling and manual restraint of mice, rats, hamsters, and rabbits. Alternate protocols describe restraint using the plastic restrainer.

  2. Handling and restraint.

    PubMed

    Donovan, John; Brown, Patricia

    2004-09-01

    For the safety of the handler and the animal, proper methods for handling and restraining laboratory animals should be followed. Improper handling can result in increased stress and injury to the animal. In addition, the handler risks injury from bite wounds or scratches inflicted when the animal becomes fearful or anxious. By using sure, direct movements with a determined attitude, the animal can be easily handled and restrained. Animals can be restrained either manually or in a plastic restrainer. The protocols in this unit describe handling and manual restraint of mice, rats, hamsters, and rabbits. Alternate protocols describe restraint using the plastic restrainer.

  3. VALIDATION OF AMBIENT WATER QUALITY CRITERIA (AWQC) BIOACCUMULATION METHODOLOGY USING FIELD DATA FROM GREEN BAY AND THE HUDSON RIVER

    EPA Science Inventory

    In 1998, EPA published its draft revision to the methodology for deriving ambient water quality criteria to protect human health. Four methods were proposed to determine lipid-normalized bioaccumulation factors based on freely-dissolved water concentrations (BAFs) for nonpolar or...

  4. Selenium transport and bioaccumulation in aquatic ecosystems: a proposal for water quality criteria based on hydrological units.

    Treesearch

    A. Dennis Lemly

    1999-01-01

    Local water quality criteria for selenium should be based on an assessment of the degree of toxicological hazard to fish and wildlife, which is influenced by the spatial and temporal variation of the selenium cycle at the site under consideration. The physical area from which measurements are taken to evaluate selenium residues and biological effects, i.e., the...

  5. A helicopter handling-qualities study of the effects of engine response characteristics, height-control dynamics, and excess power on nap-of-the-Earth operations

    NASA Technical Reports Server (NTRS)

    Corliss, L. D.

    1982-01-01

    The helicopter configuration with an rpm-governed gas-turbine engine was examined. A wide range of engine response time, vehicle damping and sensitivity, and excess power levels was studied. The data are compared with the existing handling-qualities specifications, MIL-F-83300 and AGARD 577, and in general show a need for higher minimums when performing such NOE maneuvers as a dolphin and bob-up task.

  6. User and System-Based Quality Criteria for Evaluating Information Resources and Services Available from Federal Websites: Final Report.

    ERIC Educational Resources Information Center

    Wyman, Steven K.; And Others

    This exploratory study establishes analytical tools (based on both technical criteria and user feedback) by which federal Web site administrators may assess the quality of their websites. The study combined qualitative and quantitative data collection techniques to achieve the following objectives: (1) identify and define key issues regarding…

  7. The effects of pilot stress factors on handling quality assessments during US/German helicopter agility flight tests

    NASA Technical Reports Server (NTRS)

    Pausder, H.-J.; Gerdes, R. M.

    1982-01-01

    Flight tests were conducted with two helicopters to study and evaluate the effects of helicopter characteristics and pilot and task demands on performance in nap-of-the-earth flight. Different, low-level slalom courses were set up and were flown by three pilots with different levels of flight experience. A pilot rating questionnaire was used to obtain redundant information and to gain more insight into factors that influence pilot ratings. The flight test setups and procedures are described, and the pilot ratings are summarized and interpreted in close connection with the analyzed test data. Pilot stress is discussed. The influence of demands on the pilot, of the helicopter characteristics, and of other stress factors are outlined with particular emphasis on how these factors affect handling-qualities assessment. Previously announced in STAR as N83-13114

  8. Quantifying the effect of editor-author relations on manuscript handling times.

    PubMed

    Sarigöl, Emre; Garcia, David; Scholtes, Ingo; Schweitzer, Frank

    2017-01-01

    In this article we study to what extent the academic peer review process is influenced by social relations between the authors of a manuscript and the editor handling the manuscript. Taking the open access journal PlosOne as a case study, our analysis is based on a data set of more than 100,000 articles published between 2007 and 2015. Using available data on handling editor, submission and acceptance time of manuscripts, we study the question whether co-authorship relations between authors and the handling editor affect the manuscript handling time , i.e. the time taken between the submission and acceptance of a manuscript. Our analysis reveals (1) that editors handle papers co-authored by previous collaborators significantly more often than expected at random, and (2) that such prior co-author relations are significantly related to faster manuscript handling. Addressing the question whether these shorter manuscript handling times can be explained by the quality of publications, we study the number of citations and downloads which accepted papers eventually accumulate. Moreover, we consider the influence of additional (social) factors, such as the editor's experience, the topical similarity between authors and editors, as well as reciprocal citation relations between authors and editors. Our findings show that, even when correcting for other factors like time, experience, and performance, prior co-authorship relations have a large and significant influence on manuscript handling times, speeding up the editorial decision on average by 19 days.

  9. Hearing aid handling skills: relationship with satisfaction and benefit.

    PubMed

    Campos, Patrícia Danieli; Bozza, Amanda; Ferrari, Deborah Viviane

    2014-01-01

    To evaluate hearing aid handling skills for new and experienced users and to assess if such skills influence user's benefit and satisfaction. Seventy four participants (mean age of 70.43), experienced (n=37) or new hearing aid users (n=37) performed the tasks of "Practical Hearing Aid Skills Test" (PHAST), which were scored on a five-point Likert scale - higher scores indicate better hearing aid handling skills. Experienced users answered the International Outcome Inventory for Hearing Aids (IOI-HA) and the hearing aid benefit for handicap reduction was calculated by the hearing handicap inventory (HHIA/HHIE). Medians for PHAST total scores of 79 and 71% were obtained for experienced and new users, respectively - there were no significant difference between groups. Lower PHAST scores were observed for the tasks of volume control manipulation and telephone usage. Moderate correlations were obtained between IOI benefit and quality of life items and the PHAST scores. There was no correlation between the results of PHAST and demographic data of the participants. There was no difference in handling skills between new and experienced hearing aid users. Handling skills affected hearing aid benefit.

  10. 33 CFR 154.1045 - Response plan development and evaluation criteria for facilities that handle, store, or transport...

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    .... Reclassifications may be to— (i) A more stringent operating environment if the prevailing wave conditions exceed the significant wave height criteria during more than 35 percent of the year; or (ii) A less stringent operating environment if the prevailing wave conditions do not exceed the significant wave height criteria for the less...

  11. Problems and criteria of quality improvement in end face mechanical seal rings through technological methods

    NASA Astrophysics Data System (ADS)

    Tarelnik, V.; Belous, A.; Antoszewski, B.; Zukov, A.

    2017-08-01

    In this paper are presented the recommendations for material’s selections of the mechanical seals rings and basic productive and operating requirements. The system of a directional selection of technology that ensures the required quality of working surfaces of the mechanical seals rings covers their entire life cycle. The mathematical frictional model is proposed as an instrument for calculating a linear and weighing abrasion of the mechanical seals rings and helps to improve selection’s criteria and the most rational method of strengthening.

  12. Improved quality of management of eclampsia patients through criteria based audit at Muhimbili National Hospital, Dar es Salaam, Tanzania. Bridging the quality gap.

    PubMed

    Kidanto, Hussein Lesio; Wangwe, Peter; Kilewo, Charles D; Nystrom, Lennarth; Lindmark, Gunnila

    2012-11-21

    Criteria-based audits (CBA) have been used to improve clinical management in developed countries, but have only recently been introduced in the developing world. This study discusses the use of a CBA to improve quality of care among eclampsia patients admitted at a University teaching hospital in Dar es Salaam Tanzania. The prevalence of eclampsia in MNH is high (≈6%) with the majority of cases arriving after start of convulsions. In 2004-2005 the case-fatality rate in eclampsia was 5.1% of all pregnant women admitted for delivery (MNH obstetric data base). A criteria-based audit (CBA) was used to evaluate the quality of care for eclamptic mothers admitted at Muhimbili National Hospital (MNH), Dar es Salaam, Tanzania after implementation of recommendations of a previous audit. A CBA of eclampsia cases was conducted at MNH. Management practices were evaluated using evidence-based criteria for appropriate care. The Ministry of Health (MOH) guidelines, local management guidelines, the WHO manual supplemented by the WHO Reproductive Health Library, standard textbooks, the Cochrane database and reviews in peer reviewed journals were adopted. At the initial audit in 2006, 389 case notes were assessed and compared with the standards, gaps were identified, recommendations made followed by implementation. A re-audit of 88 cases was conducted in 2009 and compared with the initial audit. There was significant improvement in quality of patient management and outcome between the initial and re-audit: Review of management plan by senior staff (76% vs. 99%; P=0.001), urine for albumin test (61% vs. 99%; P=0.001), proper use of partogram to monitor labour (75% vs. 95%; P=0.003), treatment with steroids for lung maturity (2.0% vs. 24%; P=0.001), Caesarean section within 2 hours of decision (33% vs. 61%; P=0.005), full blood count (28% vs. 93%; P=0.001), serum urea and creatinine (44% vs. 86%; P=0.001), liver enzymes (4.0% vs. 86%; P=0.001), and specialist review within 2 hours of

  13. 42 CFR 493.1242 - Standard: Specimen submission, handling, and referral.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 42 Public Health 5 2010-10-01 2010-10-01 false Standard: Specimen submission, handling, and referral. 493.1242 Section 493.1242 Public Health CENTERS FOR MEDICARE & MEDICAID SERVICES, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) STANDARDS AND CERTIFICATION LABORATORY REQUIREMENTS Quality System...

  14. The GRADE approach and Bradford Hill's criteria for causation.

    PubMed

    Schünemann, Holger; Hill, Suzanne; Guyatt, Gordon; Akl, Elie A; Ahmed, Faruque

    2011-05-01

    This article describes how the Grading of Recommendations Assessment, Development and Evaluation (GRADE) approach to grading the quality of evidence and strength of recommendations considers the Bradford Hill criteria for causation and how GRADE may relate to questions in public health. A primary concern in public health is that evidence from non-randomised studies may provide a more adequate or best available measure of a public health strategy's impact, but that such evidence might be graded as lower quality in the GRADE framework. GRADE, however, presents a framework that describes both criteria for assessing the quality of research evidence and the strength of recommendations that includes considerations arising from the Bradford Hill criteria. GRADE places emphasis on recommendations and in assessing quality of evidence; GRADE notes that randomisation is only one of many relevant factors. This article describes how causation may relate to developing recommendations and how the Bradford Hill criteria are considered in GRADE, using examples from the public health literature with a focus on immunisation.

  15. Education Criteria for Performance Excellence, 2002.

    ERIC Educational Resources Information Center

    National Inst. of Standards and Technology, Gaithersburg, MD.

    The education criteria presented in this guide are designed to help organizations use an integrated approach to organizational performance management that results in delivery of ever-improving value to students and stakeholders. Implementation of the criteria will contribute to improvement of education quality, improvement of overall…

  16. Evaluation of Research Ethics Committees: Criteria for the Ethical Quality of the Review Process.

    PubMed

    Scherzinger, Gregor; Bobbert, Monika

    2017-01-01

    Repeatedly, adequacy, performance and quality of Ethics Committees that oversee medical research trials are being discussed. Although they play a crucial role in reviewing medical research and protecting human subjects, it is far from clear to what degree they fulfill the task they have been assigned to. This eventuates in the call for an evaluation of their activity and, in some places, led to the establishment of accreditation schemes. At the same time, IRBs have become subject of detailed legislation in the process of the ongoing global juridification of medical research. Unsurprisingly, there is a tendency to understand the evaluation of RECs as a question of controlling their legal compliance. This paper discusses the need for a quality evaluation of IRBs from an ethical point of view and, by systematically reviewing the major ethical guidelines for IRBs, proposes a system of criteria that should orientate any evaluation of IRBs.

  17. Use of Multiple Linear Regression Models for Setting Water Quality Criteria for Copper: A Complementary Approach to the Biotic Ligand Model.

    PubMed

    Brix, Kevin V; DeForest, David K; Tear, Lucinda; Grosell, Martin; Adams, William J

    2017-05-02

    Biotic Ligand Models (BLMs) for metals are widely applied in ecological risk assessments and in the development of regulatory water quality guidelines in Europe, and in 2007 the United States Environmental Protection Agency (USEPA) recommended BLM-based water quality criteria (WQC) for Cu in freshwater. However, to-date, few states have adopted BLM-based Cu criteria into their water quality standards on a state-wide basis, which appears to be due to the perception that the BLM is too complicated or requires too many input variables. Using the mechanistic BLM framework to first identify key water chemistry parameters that influence Cu bioavailability, namely dissolved organic carbon (DOC), pH, and hardness, we developed Cu criteria using the same basic methodology used by the USEPA to derive hardness-based criteria but with the addition of DOC and pH. As an initial proof of concept, we developed stepwise multiple linear regression (MLR) models for species that have been tested over wide ranges of DOC, pH, and hardness conditions. These models predicted acute Cu toxicity values that were within a factor of ±2 in 77% to 97% of tests (5 species had adequate data) and chronic Cu toxicity values that were within a factor of ±2 in 92% of tests (1 species had adequate data). This level of accuracy is comparable to the BLM. Following USEPA guidelines for WQC development, the species data were then combined to develop a linear model with pooled slopes for each independent parameter (i.e., DOC, pH, and hardness) and species-specific intercepts using Analysis of Covariance. The pooled MLR and BLM models predicted species-specific toxicity with similar precision; adjusted R 2 and R 2 values ranged from 0.56 to 0.86 and 0.66-0.85, respectively. Graphical exploration of relationships between predicted and observed toxicity, residuals and observed toxicity, and residuals and concentrations of key input parameters revealed many similarities and a few key distinctions between the

  18. 10 CFR 72.128 - Criteria for spent fuel, high-level radioactive waste, reactor-related greater than Class C waste...

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ..., reactor-related greater than Class C waste, and other radioactive waste storage and handling. 72.128... STORAGE OF SPENT NUCLEAR FUEL, HIGH-LEVEL RADIOACTIVE WASTE, AND REACTOR-RELATED GREATER THAN CLASS C WASTE General Design Criteria § 72.128 Criteria for spent fuel, high-level radioactive waste, reactor...

  19. 10 CFR 72.128 - Criteria for spent fuel, high-level radioactive waste, reactor-related greater than Class C waste...

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ..., reactor-related greater than Class C waste, and other radioactive waste storage and handling. 72.128... STORAGE OF SPENT NUCLEAR FUEL, HIGH-LEVEL RADIOACTIVE WASTE, AND REACTOR-RELATED GREATER THAN CLASS C WASTE General Design Criteria § 72.128 Criteria for spent fuel, high-level radioactive waste, reactor...

  20. Applying user-generated quality criteria to develop an Internet intervention for patients with heart disease.

    PubMed

    Kerr, Cicely; Murray, Elizabeth; Burns, Jo; Turner, Indra; Westwood, Mark A; Macadam, Catherine; Nazareth, Irwin; Patterson, David

    2008-01-01

    Internet interventions can help people to self-manage chronic disease. However, they are only likely to be used if they meet patients' perceived needs. We have developed an Internet intervention in two stages to meet the needs of patients with coronary heart disease (CHD). First, user-generated criteria were applied to an existing US-based intervention called 'CHESS Living with Heart Disease' which provides information, emotional and social support, self-assessment and monitoring tools, and behavioural change support. This identified the development work required. Then we conducted a user evaluation with a panel of five patients with CHD. Overall, users generally made positive comments about the information content. However they were critical of presentation, ease of navigation through the content, understanding what was offered in the different services and finding the information they were after. Applying user-generated quality criteria proved useful in developing an intervention to meet the needs of UK patients with CHD.

  1. 7 CFR 996.30 - Incoming quality standards.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 7 Agriculture 8 2010-01-01 2010-01-01 false Incoming quality standards. 996.30 Section 996.30... Agreements and Orders; Fruits, Vegetables, Nuts), DEPARTMENT OF AGRICULTURE MINIMUM QUALITY AND HANDLING STANDARDS FOR DOMESTIC AND IMPORTED PEANUTS MARKETED IN THE UNITED STATES Quality and Handling Standards...

  2. 13 CFR 108.360 - Evaluation criteria.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... 13 Business Credit and Assistance 1 2011-01-01 2011-01-01 false Evaluation criteria. 108.360... (âNMVCâ) PROGRAM Evaluation and Selection of NMVC Companies § 108.360 Evaluation criteria. SBA will... criteria— (a) The quality of the Applicant's comprehensive business plan in terms of meeting the objectives...

  3. Aquatic Life Criteria - Lead

    EPA Pesticide Factsheets

    References and documents pertaining to Acute and Chronic Ambient Aquatic Life Water Quality Criteria for Lead. These documents include the safe levels of Lead in water that should protect the majority of species.

  4. Can state-of-the-art HVS-based objective image quality criteria be used for image reconstruction techniques based on ROI analysis?

    NASA Astrophysics Data System (ADS)

    Dostal, P.; Krasula, L.; Klima, M.

    2012-06-01

    Various image processing techniques in multimedia technology are optimized using visual attention feature of the human visual system. Spatial non-uniformity causes that different locations in an image are of different importance in terms of perception of the image. In other words, the perceived image quality depends mainly on the quality of important locations known as regions of interest. The performance of such techniques is measured by subjective evaluation or objective image quality criteria. Many state-of-the-art objective metrics are based on HVS properties; SSIM, MS-SSIM based on image structural information, VIF based on the information that human brain can ideally gain from the reference image or FSIM utilizing the low-level features to assign the different importance to each location in the image. But still none of these objective metrics utilize the analysis of regions of interest. We solve the question if these objective metrics can be used for effective evaluation of images reconstructed by processing techniques based on ROI analysis utilizing high-level features. In this paper authors show that the state-of-the-art objective metrics do not correlate well with subjective evaluation while the demosaicing based on ROI analysis is used for reconstruction. The ROI were computed from "ground truth" visual attention data. The algorithm combining two known demosaicing techniques on the basis of ROI location is proposed to reconstruct the ROI in fine quality while the rest of image is reconstructed with low quality. The color image reconstructed by this ROI approach was compared with selected demosaicing techniques by objective criteria and subjective testing. The qualitative comparison of the objective and subjective results indicates that the state-of-the-art objective metrics are still not suitable for evaluation image processing techniques based on ROI analysis and new criteria is demanded.

  5. SU-E-T-60: A Plan Quality Index in IMRT QA That Is Independent of the Acceptance Criteria

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Kim, D; Kang, S; Kim, T

    2015-06-15

    Purpose: In IMRT QA, plan quality evaluation is made based on pass rate under preset acceptance criteria, mostly using gamma-values. This method is convenient but, its Result highly depends on what the acceptance criteria are and suffers from the lack of sensitivity in judging how good the plan is. In this study, we introduced a simple but effective plan quality index of IMRT QA based on dose difference only to supplement such shortcomings, and investigated its validity. Methods: The proposed index is a single value which is calculated mainly based on point-by-point comparison between planned and measured dose distributions, andmore » it becomes “1” in an ideal case. A systematic evaluation was performed with one-dimensional test dose distributions. For 3 hypothetical dose profiles, various displacements (in both dose and space) were introduced, the proposed index was calculated for each case, and the behavior of obtained indices was analyzed and compared with that of gamma evaluation. In addition, the feasibility of the index was assessed with clinical IMRT/VMAT/SBRT QA cases for different sites (prostate, head & neck, liver, lung, spine, and abdomen). Results: The proposed index showed more robust correlation with the amount of induced displacement compared to the gamma evaluation method. No matter what the acceptance criteria are (e.g., whether 3%/3mm or 2%/2mm), it was possible to clearly rank every case with the proposed index while it was difficult to do with the gamma evaluation method. Conclusion: IMRT plan quality can be evaluated quantitatively by the proposed index. It is considered that the proposed index would provide useful information for better judging the level of goodness of each plan and its Result is independent of the acceptance criteria. This work was supported by the Radiation Technology R&D program (No. 2013M2A2A7043498) and the Mid-career Researcher Program (2014R1A2A1A10050270) through the National Research Foundation of Korea funded

  6. Quality of clinical practice guidelines of lower extremity venous ulcers.

    PubMed

    Rumbo-Prieto, José María; Arantón-Areosa, Luis; Palomar-Llatas, Federico; Romero-Martín, Manuel

    The clinical variability and professional uncertainty in the prevention and treatment of lower extremity venous ulcers (VU) has as a main consequence, the fact that patients can be subjected to diagnostic and therapeutic tests, sometimes of dubious utility, these may even be harmful to the health of the patient and that, at other times, certain procedures or processes that may be appropriate to the patient's situation and needs may be omitted. It is for this reason that a series of specific documents called clinical practice guidelines for the approach of VU (CPG-VU) have been created, with the aim of improving the effectiveness and quality of care, reducing unjustified variability and establishing homogeneous criteria for its handling. Nevertheless, the literature shows that not all CPGs have the same methodological and evidence-drawing criteria. Many of them are of poor scientific quality and editorial rigor. This implies that CPGs should be periodically reviewed and updated based on the most current evidence and their quality contrasted with validated instruments such as AGREE-II. After an analysis of the quality of six CPG-VU available today, it has been possible to identify what guidelines are recommended for its implementation in the practice of care, which should be modified to improve their applicability and development of the evidence. Copyright © 2017 Elsevier España, S.L.U. All rights reserved.

  7. Determination of criteria weights in solving multi-criteria problems

    NASA Astrophysics Data System (ADS)

    Kasim, Maznah Mat

    2014-12-01

    A multi-criteria (MC) problem comprises of units to be analyzed under a set of evaluation criteria. Solving a MC problem is basically the process of finding the overall performance or overall quality of the units of analysis by using certain aggregation method. Based on these overall measures of each unit, a decision can be made whether to sort them, to select the best or to group them according to certain ranges. Prior to solving the MC problems, the weights of the related criteria have to be determined with the assumption that the weights represent the degree of importance or the degree of contribution towards the overall performance of the units. This paper presents two main approaches which are called as subjective and objective approaches, where the first one involves evaluator(s) while the latter approach depends on the intrinsic information contained in each criterion. The subjective and objective weights are defined if the criteria are assumed to be independent with each other, but if they are dependent, there is another type of weight, which is called as monotone measure weight or compound weights which represent degree of interaction among the criteria. The measure of individual weights or compound weights must be addressed in solving multi-criteria problems so that the solutions are more reliable since in the real world, evaluation criteria always come with different degree of importance or are dependent with each other. As the real MC problems have their own uniqueness, it is up to the decision maker(s) to decide which type of weights and which method are the most applicable ones for the problem under study.

  8. Aquatic Life Criteria - Ammonia

    EPA Pesticide Factsheets

    Documents related to EPA's final 2013 Aquatic Life Ambient Water Quality Criteria for Ammonia (Freshwater). These documents pertain to the safe levels of Ammonia in water that should protect to the majority of species.

  9. Aquatic Life Criteria - Copper

    EPA Pesticide Factsheets

    Documents pertain to Aquatic Life Ambient Water Quality criteria for Copper (2007 Freshwater, 2016 Estuarine/marine). These documents contain the safe levels of Copper in water that should protect to the majority of species.

  10. A piloted simulator investigation of augmentation systems to improve helicopter nap-of-the-earth handling qualities

    NASA Technical Reports Server (NTRS)

    Chen, R. T. N.; Talbot, P. D.; Gerdes, R. M.; Dugan, D. C.

    1978-01-01

    A piloted simulation study assessed various levels of stability and control augmentation designed to improve the handling qualities of several helicopters in nap-of-the-earth (NOE) flight. Five basic single rotor helicopters - one teetering, two articulated, and two hingeless - which were found to have a variety of major deficiencies in a previous fixed-based simulator study were selected as baseline configurations. The stability and control augmentation systems (SCAS) include simple control augmentation systems (CAS) to decouple pitch and yaw responses due to collective input and to quicken the pitch and roll control responses; SCAS of rate command type designed to optimize the sensitivity and damping and to decouple the pitch-roll due to aircraft angular rate; and attitude command type SCAS. Pilot ratings and commentary are presented as well as performance data related to the task. SCAS control usage and their gain levels associated with specific rotor type are also discussed.

  11. 7 CFR 996.50 - Reconditioning failing quality peanuts.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 7 Agriculture 8 2010-01-01 2010-01-01 false Reconditioning failing quality peanuts. 996.50 Section... QUALITY AND HANDLING STANDARDS FOR DOMESTIC AND IMPORTED PEANUTS MARKETED IN THE UNITED STATES Quality and Handling Standards § 996.50 Reconditioning failing quality peanuts. (a) Lots of peanuts which have not been...

  12. 7 CFR 996.50 - Reconditioning failing quality peanuts.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... 7 Agriculture 8 2011-01-01 2011-01-01 false Reconditioning failing quality peanuts. 996.50 Section... QUALITY AND HANDLING STANDARDS FOR DOMESTIC AND IMPORTED PEANUTS MARKETED IN THE UNITED STATES Quality and Handling Standards § 996.50 Reconditioning failing quality peanuts. (a) Lots of peanuts which have not been...

  13. Ecotoxicological criteria for final storage quality: Possibilities and limits

    NASA Astrophysics Data System (ADS)

    Zeyer, Josef; Meyer, Joseph

    Landfills are complex chemical and biological reactors whose internal processes are often beyond the immediate control of process engineers. Therefore, the concept of a "Final Storage Landfill" may be deceptive. Furthermore, traditional approaches to establishing discharge criteria and treatment requirements for industrial effluents may not work well for landfill emissions. Factories can often be treated as steady-state processes whose inputs and outputs are predictable; however, landfills are batch reactors whose contents and emissions may be unknown and will vary temporally and spatially. If the contents of a landfill are known, the sequence of chemical reactions can be predicted qualitatively. Even if that sequence is predictable, though, quantitative ecotoxicological criteria will be difficult to establish, and risk assessments based on chemical "laundry lists" will be questionable. The situation is not hopeless, though. New approaches can be developed to monitor and predict landfill emissions. We believe these will include (1) testing (biological and chemical) of internal components of landfills as well as emissions; (2) development of laboratory and/or field methods in which the chemical and biological evolution of landfills can be studied at accelerated rates, thus allowing better prediction of future emissions; and (3) flexible ecotoxicological criteria that are adaptable to the evolving nature of landfill emissions. These criteria should be based on complementary chemical analyses and biological tests that fit into a hierarchical (decision-tree) hazard assessment strategy.

  14. CORAL REEF BIOLOGICAL CRITERIA: USING THE CLEAN ...

    EPA Pesticide Factsheets

    Coral reefs are declining at unprecedented rates worldwide due to multiple interactive stressors including climate change and land-based sources of pollution. The Clean Water Act (CWA) can be a powerful legal instrument for protecting water resources, including the biological inhabitants of coral reefs. The objective of the CWA is to restore and maintain the chemical, physical and biological integrity of water resources. Coral reef protection and restoration under the Clean Water Act begins with water quality standards - provisions of state or Federal law that consist of a designated use(s) for the waters of the United States and water quality criteria sufficient to protect the uses. Aquatic life use is the designated use that is measured by biological criteria (biocriteria). Biocriteria are expectations set by a jurisdiction for the quality and quantity of living aquatic resources in a defined waterbody. Biocriteria are an important addition to existing management tools for coral reef ecosystems. The Technical Support Document “Coral Reef Biological Criteria: Using the Clean Water Act to Protect a National Treasure” will provide a framework to aid States and Territories in their development, adoption, and implementation of coral reef biocriteria in their respective water quality standards. The Technical Support Document “Coral Reef Biological Criteria: Using the Clean Water Act to Protect a National Treasure” will provide a framework for coral re

  15. A novel, fuzzy-based air quality index (FAQI) for air quality assessment

    NASA Astrophysics Data System (ADS)

    Sowlat, Mohammad Hossein; Gharibi, Hamed; Yunesian, Masud; Tayefeh Mahmoudi, Maryam; Lotfi, Saeedeh

    2011-04-01

    The ever increasing level of air pollution in most areas of the world has led to development of a variety of air quality indices for estimation of health effects of air pollution, though the indices have their own limitations such as high levels of subjectivity. Present study, therefore, aimed at developing a novel, fuzzy-based air quality index (FAQI ) to handle such limitations. The index developed by present study is based on fuzzy logic that is considered as one of the most common computational methods of artificial intelligence. In addition to criteria air pollutants (i.e. CO, SO 2, PM 10, O 3, NO 2), benzene, toluene, ethylbenzene, xylene, and 1,3-butadiene were also taken into account in the index proposed, because of their considerable health effects. Different weighting factors were then assigned to each pollutant according to its priority. Trapezoidal membership functions were employed for classifications and the final index consisted of 72 inference rules. To assess the performance of the index, a case study was carried out employing air quality data at five different sampling stations in Tehran, Iran, from January 2008 to December 2009, results of which were then compared to the results obtained from USEPA air quality index (AQI). According to the results from present study, fuzzy-based air quality index is a comprehensive tool for classification of air quality and tends to produce accurate results. Therefore, it can be considered useful, reliable, and suitable for consideration by local authorities in air quality assessment and management schemes. Fuzzy-based air quality index (FAQI).

  16. Aquatic Life Criteria - Cadmium

    EPA Pesticide Factsheets

    Documents pertaining to 2016 Acute and Chronic Aquatic Life Ambient Water Quality Criteria for Cadmium (Freshwater, Estuarine/marine). These documents contain the safe levels of Cadmium in water that should protect to the majority of species.

  17. Aquatic Life Criteria - Atrazine

    EPA Pesticide Factsheets

    Documents pertaining to Acute and Chronic Ambient Water Quality Aquatic Life Criteria for Atrazine (Freshwater and Salt Water). This document contains the safe levels of Atrazine in water that should protect to the majority of species.

  18. Aquatic Life Criteria - Carbaryl

    EPA Pesticide Factsheets

    Documents pertaining to 2012 Final National Recommended Aquatic Life Ambient Water Quality Criteria for Carbaryl (Freshwater, Estuarine/marine). These documents contain the safe levels of Carbaryl in water that should protect to the majority of species.

  19. The effects of aircraft design on STOL ride quality

    NASA Technical Reports Server (NTRS)

    Jones, C. R.; Jacobson, I. D.

    1975-01-01

    Effects of aircraft dynamic characteristics on passenger ride quality are investigated to determine ride-quality isocontours similar to aircraft handling-qualities contours. Measurements are made on a moving-base simulator while varying the aircraft short-period and Dutch Roll frequencies and dampings. Both pilot ratings and subjective ride-quality ratings are obtained during flight. Ride and handling qualities were found to be complementary for the Dutch Roll mode, but not for the short-period mode. Regions of optimal ride and handling qualities are defined for the short-period mode, and the effects of turbulence levels studied.

  20. A multi-criteria decision-making approach to rank supplier selection criteria for hospital waste management: A case from Pakistan.

    PubMed

    Ishtiaq, Palvisha; Khan, Sharfuddin Ahmed; Haq, Moiz-Ul

    2018-04-01

    To address environmental issues and cost effectiveness, waste management is necessary for healthcare facilities. Most importantly, segregation of hazardous and non-hazardous waste must be done as in many developing countries; disposal of both types of healthcare waste is done together, which is an unsafe practice. Waste generated in hospitals needs proper management to minimise hazards for patient and healthcare workers. At the same time, it is quite difficult for hospitals to find a systematic way to select appropriate suppliers for hospital waste management. Therefore, the purpose of this article is to identify, validate, and rank criteria that are essential for hospital waste management suppliers' selection. The analytical hierarchal process approach has been used and a survey from Pakistan's largest city (Karachi) has been considered to rank the most appropriate criteria that is necessary to select the supplier, especially in a developing country like Pakistan. Results show that waste management cost (45.5%) and suppliers' details (31.5%) are the top two main criteria for supplier selection; and storage cost (15.7%), waste handling cost (14.7%), and qualification of the suppliers (10.9%) are the top three most important overall sub-criteria for supplier selection for hospital waste management.

  1. Manual handling incident claims in the healthcare sector: Factors and outcomes.

    PubMed

    Dockrell, Sara; Johnson, Muriel; Ganly, Joe; Bennett, Kathleen

    2011-01-01

    Manual handling (MH) incidents may result in injury, absenteeism and/or compensation claim. This study investigated the factors associated with MH incidents among healthcare workers who had made a claim, and the management and outcome of those workers. A national sample of healthcare sector MH incident claim files (n=247) were accessed and 35~files met the inclusion criteria. Data were collected and presented graphically or descriptively using percentages (and 95% Confidence intervals, CI). Chi-square (χ2) tests were used for comparing proportions between groups. SPSS (v14.0) was used for analysis. Significance at p<0.05 is assumed. Attendants accounted for the highest number of claimants. The majority of claims (74%, 95% CI 68%, 81%) were for back injury; 11% (8%, 15%) for neck injury. Fifty-one percent (43%, 60%) involved patient-handling tasks at the time of incident; 46% (37%, 54%) involved inanimate handling. Ninety-one percent (89%, 94%) took sick leave, with 52% (43%, 60%) taking > 52 weeks. Only 58% (49%, 65%) returned to work. Claimants who had been in communication with employers were significantly more likely to return to work than those who did not (χ2 test, p=0.017). Improved management of MH incidents and injured workers are recommended.

  2. Ecotoxicologically based marine acute water quality criteria for metals intended for protection of coastal areas.

    PubMed

    Durán, I; Beiras, R

    2013-10-01

    Acute water quality criteria (WQC) for the protection of coastal ecosystems are developed on the basis of short-term ecotoxicological data using the most sensitive life stages of representative species from the main taxa of marine water column organisms. A probabilistic approach based on species sensitivity distribution (SSD) curves has been chosen and compared to the WQC obtained applying an assessment factor to the critical toxicity values, i.e. the 'deterministic' approach. The criteria obtained from HC5 values (5th percentile of the SSD) were 1.01 μg/l for Hg, 1.39 μg/l for Cu, 3.83 μg/l for Cd, 25.3 μg/l for Pb and 8.24 μg/l for Zn. Using sensitive early life stages and very sensitive endpoints allowed calculation of WQC for marine coastal ecosystems. These probabilistic WQC, intended to protect 95% of the species in 95% of the cases, were calculated on the basis of a limited ecotoxicological dataset, avoiding the use of large and uncertain assessment factors. Copyright © 2013 Elsevier B.V. All rights reserved.

  3. The impact of flying qualities on helicopter operational agility

    NASA Technical Reports Server (NTRS)

    Padfield, Gareth D.; Lappos, Nick; Hodgkinson, John

    1993-01-01

    Flying qualities standards are formally set to ensure safe flight and therefore reflect minimum, rather than optimum, requirements. Agility is a flying quality but relates to operations at high, if not maximum, performance. While the quality metrics and test procedures for flying, as covered for example in ADS33C, may provide an adequate structure to encompass agility, they do not currently address flight at high performance. This is also true in the fixed-wing world and a current concern in both communities is the absence of substantiated agility criteria and possible conflicts between flying qualities and high performance. AGARD is sponsoring a working group (WG19) title 'Operational Agility' that deals with these and a range of related issues. This paper is condensed from contributions by the three authors to WG19, relating to flying qualities. Novel perspectives on the subject are presented including the agility factor, that quantifies performance margins in flying qualities terms; a new parameter, based on maneuver acceleration is introduced as a potential candidate for defining upper limits to flying qualities. Finally, a probabilistic analysis of pilot handling qualities ratings is presented that suggests a powerful relationship between inherent airframe flying qualities and operational agility.

  4. Recreational Water Quality Criteria Limits

    EPA Pesticide Factsheets

    This set of Frequently Asked Questions (FAQ) provides an overview of NPDES permitting applicable to continuous dischargers (such as POTWs) based on water quality standards for pathogens and pathogen indicators associated with fecal contamination.

  5. CARRIER/CASK HANDLING SYSTEM DESCRIPTION DOCUMENT

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    E.F. Loros

    2000-06-23

    The Carrier/Cask Handling System receives casks on railcars and legal-weight trucks (LWTs) (transporters) that transport loaded casks and empty overpacks to the Monitored Geologic Repository (MGR) from the Carrier/Cask Transport System. Casks that come to the MGR on heavy-haul trucks (HHTs) are transferred onto railcars before being brought into the Carrier/Cask Handling System. The system is the interfacing system between the railcars and LWTs and the Assembly Transfer System (ATS) and Canister Transfer System (CTS). The Carrier/Cask Handling System removes loaded casks from the cask transporters and transfers the casks to a transfer cart for either the ATS or CTS,more » as appropriate, based on cask contents. The Carrier/Cask Handling System receives the returned empty casks from the ATS and CTS and mounts the casks back onto the transporters for reshipment. If necessary, the Carrier/Cask Handling System can also mount loaded casks back onto the transporters and remove empty casks from the transporters. The Carrier/Cask Handling System receives overpacks from the ATS loaded with canisters that have been cut open and emptied and mounts the overpacks back onto the transporters for disposal. If necessary, the Carrier/Cask Handling System can also mount empty overpacks back onto the transporters and remove loaded overpacks from them. The Carrier/Cask Handling System is located within the Carrier Bay of the Waste Handling Building System. The system consists of cranes, hoists, manipulators, and supporting equipment. The Carrier/Cask Handling System is designed with the tooling and fixtures necessary for handling a variety of casks. The Carrier/Cask Handling System performance and reliability are sufficient to support the shipping and emplacement schedules for the MGR. The Carrier/Cask Handling System interfaces with the Carrier/Cask Transport System, ATS, and CTS as noted above. The Carrier/Cask Handling System interfaces with the Waste Handling Building System for

  6. The impact of involvement of biomedical scientists in specimen dissection and selection of blocks for histopathology: a study of time benefits and specimen handling quality in Ayrshire and Arran area laboratory

    PubMed Central

    Duthie, F R; Nairn, E R; Milne, A W; McTaggart, V; Topping, D

    2004-01-01

    Aims: To assess possible time benefits of specimen dissection by biomedical scientists (BMSs) and the quality of specimen handling by BMSs, in a department where BMSs trim those specimens requiring simple descriptions, from which standard blocks are taken. Methods: Specimen handling by BMSs and consultant pathologists was compared. Time taken for each specimen trimmed was recorded prospectively. To determine specimen handling quality, adherence to dissection standard operating procedures (SOPs) was assessed by recording retrospectively whether or not each action in the SOP had been performed. Information on subsequently required extra levels or blocks was recorded. Results: Analysis of data from 672 specimens trimmed by consultants showed that any given action in the SOPs was performed on average on 60.2% of applicable/assessable specimens; for 660 similar specimens trimmed by BMSs, each action was performed on average on 80.1% of specimens. Of the specimens where data on extra blocks were recorded, extra blocks were required in 3% of those trimmed by pathologists and in 4% of those trimmed by BMSs. Extra levels were required in 12% of those trimmed by pathologists and in 16% of those trimmed by BMSs. BMS trimming saves 16 hours of consultant time each month. The difference between pathologists and BMSs in time for each specimen trimmed is negligible. Conclusions: The advantages of increased adherence to trimming SOPs and saving consultant time outweigh the relatively small number of extra blocks and levels required when BMSs trim. There is no reduction in quality of dissection. PMID:14693831

  7. Alumina Handling Dustiness

    NASA Astrophysics Data System (ADS)

    Authier-Martin, Monique

    Dustiness of calcined alumina is a major concern, causing undesirable working conditions and serious alumina losses. These losses occur primarily during unloading and handling or pot loading and crust breaking. The handling side of the problem is first addressed. The Perra pulvimeter constitutes a simple and reproducible tool to quantify handling dustiness and yields results in agreement with plant experience. Attempts are made to correlate dustiness with bulk properties (particle size, attrition index, …) for a large number of diverse aluminas. The characterization of the dust generated with the Perra pulvimeter is most revealing. The effect of the addition of E.S.P. dust is also reported.

  8. 77 FR 71191 - 2012 Recreational Water Quality Criteria

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-11-29

    ... Criteria AGENCY: Environmental Protection Agency (EPA). ACTION: Notice of availability of the 2012... for beach monitoring, quantitative polymerase chain reaction (qPCR), for the detection of enterococci... managing recreational waters, such as predictive modeling; the EPA is providing a beach action value for...

  9. Ergonomic material-handling device

    DOEpatents

    Barsnick, Lance E.; Zalk, David M.; Perry, Catherine M.; Biggs, Terry; Tageson, Robert E.

    2004-08-24

    A hand-held ergonomic material-handling device capable of moving heavy objects, such as large waste containers and other large objects requiring mechanical assistance. The ergonomic material-handling device can be used with neutral postures of the back, shoulders, wrists and knees, thereby reducing potential injury to the user. The device involves two key features: 1) gives the user the ability to adjust the height of the handles of the device to ergonomically fit the needs of the user's back, wrists and shoulders; and 2) has a rounded handlebar shape, as well as the size and configuration of the handles which keep the user's wrists in a neutral posture during manipulation of the device.

  10. Determination of water environment standards based on water quality criteria in China: Limitations and feasibilities.

    PubMed

    Wang, Tieyu; Zhou, Yunqiao; Bi, Cencen; Lu, Yonglong; He, Guizhen; Giesy, John P

    2017-07-01

    There is a need to formulate water environment standards (WESs) from the current water quality criteria (WQC) in China. To this end, we briefly summarize typical mechanisms applied in several countries with longer histories of developing WESs, and three limitations to formulating WESs in China were identified. After analyzing the feasibility factors including economic development, scientific support capability and environmental policies, we realized that China is still not ready for a complete change from its current nation-wide unified WES system to a local-standard-based system. Thus, we proposed a framework for transformation from WQC to WESs in China. The framework consists of three parts, including responsibilities, processes and policies. The responsibilities include research authorization, development of guidelines, and collection of information, at both national and local levels; the processes include four steps and an impact factor system to establish water quality standards; and the policies include seven specific proposals. Copyright © 2016. Published by Elsevier B.V.

  11. Piloting Vertical Flight Aircraft: A Conference on Flying Qualities and Human Factors

    NASA Technical Reports Server (NTRS)

    Blanken, Christopher L. (Editor); Whalley, Matthew S. (Editor)

    1993-01-01

    This document contains papers from a specialists' meeting entitled 'Piloting Vertical Flight Aircraft: A Conference on Flying Qualities and Human Factors.' Vertical flight aircraft, including helicopters and a variety of Vertical Takeoff and Landing (VTOL) concepts, place unique requirements on human perception, control, and performance for the conduct of their design missions. The intent of this conference was to examine, for these vehicles, advances in: (1) design of flight control systems for ADS-33C standards; (2) assessment of human factors influences of cockpit displays and operational procedures; (3) development of VTOL design and operational criteria; and (4) development of theoretical methods or models for predicting pilot/vehicle performance and mission suitability. A secondary goal of the conference was to provide an initial venue for enhanced interaction between human factors and handling qualities specialists.

  12. Summary of the effects of engine throttle response on airplane formation-flying qualities

    NASA Technical Reports Server (NTRS)

    Walsh, Kevin R.

    1993-01-01

    A flight evaluation was conducted to determine the effect of engine throttle response characteristics on precision formation-flying qualities. A variable electronic throttle control system was developed and flight-tested on a TF-104G airplane with a J79-11B engine at the NASA Dryden Flight Research Facility. This airplane was chosen because of its known, very favorable thrust response characteristics. Ten research flights were flown to evaluate the effects of throttle gain, time delay, and fuel control rate limiting on engine handling qualities during a demanding precision wing formation task. Handling quality effects of lag filters and lead compensation time delays were also evaluated. The Cooper and Harper Pilot Rating Scale was used to assign levels of handling quality. Data from pilot ratings and comments indicate that throttle control system time delays and rate limits cause significant degradations in handling qualities. Threshold values for satisfactory (level 1) and adequate (level 2) handling qualities of these key variables are presented. These results may provide engine manufacturers with guidelines to assure satisfactory handling qualities in future engine designs.

  13. Aquatic Life Criteria - Cadmium Documents

    EPA Pesticide Factsheets

    Documents pertaining to 2016 Acute and Chronic Aquatic Life Ambient Water Quality Criteria for Cadmium (Freshwater, Estuarine/marine). These documents contain the safe levels of Cadmium in water that should protect the majority of species.

  14. Food-intake patterns assessed by using front-of-pack labeling program criteria associated with better diet quality and lower cardiometabolic risk

    USDA-ARS?s Scientific Manuscript database

    Front-of-pack labeling systems may provide additional guidance to that already available to facilitate the identification of foods that improve diet quality. We examined the association between choosing foods that meet criteria of an established front-of-pack labeling system with food-group and nutr...

  15. Stakeholder Partnerships as Collaborative Policymaking: Evaluation Criteria Applied to Watershed Management in California and Washington

    ERIC Educational Resources Information Center

    Leach, William D.; Pelkey, Neil W.; Sabatier, Paul A.

    2002-01-01

    Public policymaking and implementation in the United States are increasingly handled through local, consensus-seeking partnerships involving most affected stakeholders. This paper formalizes the concept of a stakeholder partnership, and proposes techniques for using interviews, surveys, and documents to measure each of six evaluation criteria.…

  16. La composition academique: les limites de l'acceptabilite (Composition for Academic Purposes: Criteria for Acceptability).

    ERIC Educational Resources Information Center

    Grenall, G. M.

    1981-01-01

    Examines the pedagogical approaches and problems attendant to the development of English writing programs for foreign students. Discusses the skills necessary to handle course work, such as essay tests, term papers and reports, theses and dissertations, and focuses particularly on diagnostic problems and acceptability criteria. Societe Nouvelle…

  17. Experienced quality factors: qualitative evaluation approach to audiovisual quality

    NASA Astrophysics Data System (ADS)

    Jumisko-Pyykkö, Satu; Häkkinen, Jukka; Nyman, Göte

    2007-02-01

    Subjective evaluation is used to identify impairment factors of multimedia quality. The final quality is often formulated via quantitative experiments, but this approach has its constraints, as subject's quality interpretations, experiences and quality evaluation criteria are disregarded. To identify these quality evaluation factors, this study examined qualitatively the criteria participants used to evaluate audiovisual video quality. A semi-structured interview was conducted with 60 participants after a subjective audiovisual quality evaluation experiment. The assessment compared several, relatively low audio-video bitrate ratios with five different television contents on mobile device. In the analysis, methodological triangulation (grounded theory, Bayesian networks and correspondence analysis) was applied to approach the qualitative quality. The results showed that the most important evaluation criteria were the factors of visual quality, contents, factors of audio quality, usefulness - followability and audiovisual interaction. Several relations between the quality factors and the similarities between the contents were identified. As a research methodological recommendation, the focus on content and usage related factors need to be further examined to improve the quality evaluation experiments.

  18. Aquatic Life Criteria - Tributyltin (TBT)

    EPA Pesticide Factsheets

    Documents pertaining to 2004 Final Acute and Chronic Ambient Aquatic Life Water Quality Criteria for Tributyltin (TBT) for freshwater and saltwater. These documents include the safe levels of TBT that should protect the majority of species.

  19. Implementing Quality Criteria in Designing and Conducting a Sequential Quan [right arrow] Qual Mixed Methods Study of Student Engagement with Learning Applied Research Methods Online

    ERIC Educational Resources Information Center

    Ivankova, Nataliya V.

    2014-01-01

    In spite of recent methodological developments related to quality assurance in mixed methods research, practical examples of how to implement quality criteria in designing and conducting sequential QUAN [right arrow] QUAL mixed methods studies to ensure the process is systematic and rigorous remain scarce. This article discusses a three-step…

  20. Students' Strategies for Exception Handling

    ERIC Educational Resources Information Center

    Rashkovits, Rami; Lavy, Ilana

    2011-01-01

    This study discusses and presents various strategies employed by novice programmers concerning exception handling. The main contributions of this paper are as follows: we provide an analysis tool to measure the level of assimilation of exception handling mechanism; we present and analyse strategies to handle exceptions; we present and analyse…

  1. Study on Handing Process and Quality Degradation of Oil Palm Fresh Fruit Bunches (FFB)

    NASA Astrophysics Data System (ADS)

    Mat Sharif, Zainon Binti; Taib, Norhasnina Binti Mohd; Yusof, Mohd Sallehuddin Bin; Rahim, Mohammad Zulafif Bin; Tobi, Abdul Latif Bin Mohd; Othman, Mohd Syafiq Bin

    2017-05-01

    The main objective of this study is to determine the relationship between quality of oil palm fresh fruit bunches (FFB) and handling processes. The study employs exploratory and descriptive design, with quantitative approach and purposive sampling using self-administrated questionnaires, were obtained from 30 smallholder respondents from the Southern Region, Peninsular Malaysia. The study reveals that there was a convincing relationship between quality of oil palm fresh fruit bunches (FFB) and handling processes. The main handling process factors influencing quality of oil palm fresh fruit bunches (FFB) were harvesting activity and handling at the plantation area. As a result, it can be deduced that the handling process factors variable explains 82.80% of the variance that reflects the quality of oil palm fresh fruit bunches (FFB). The overall findings reveal that the handling process factors do play a significant role in the quality of oil palm fresh fruit bunches (FFB).

  2. 46 CFR 111.106-13 - Cargo handling devices or cargo pump rooms handling flammable or combustible cargoes.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... pierced by fixed lights, drive shafts, and pump-engine control rods, provided that the shafts and rods are... 46 Shipping 4 2014-10-01 2014-10-01 false Cargo handling devices or cargo pump rooms handling... OSVs § 111.106-13 Cargo handling devices or cargo pump rooms handling flammable or combustible cargoes...

  3. An experimental evaluation of the Sternberg task as a workload metric for helicopter Flight Handling Qualities (FHQ) research

    NASA Technical Reports Server (NTRS)

    Hemingway, J. C.

    1984-01-01

    The objective was to determine whether the Sternberg item-recognition task, employed as a secondary task measure of spare mental capacity for flight handling qualities (FHQ) simulation research, could help to differentiate between different flight-control conditions. FHQ evaluations were conducted on the Vertical Motion Simulator at Ames Research Center to investigate different primary flight-control configurations, and selected stability and control augmentation levels for helicopters engaged in low-level flight regimes. The Sternberg task was superimposed upon the primary flight-control task in a balanced experimental design. The results of parametric statistical analysis of Sternberg secondary task data failed to support the continued use of this task as a measure of pilot workload. In addition to the secondary task, subjects provided Cooper-Harper pilot ratings (CHPR) and responded to workload questionnaire. The CHPR data also failed to provide reliable statistical discrimination between FHQ treatment conditions; some insight into the behavior of the secondary task was gained from the workload questionnaire data.

  4. Deriving Freshwater Quality Criteria for Iron, Lead, Nickel, and Zinc for Protection of Aquatic Life in Malaysia

    PubMed Central

    Shuhaimi-Othman, M.; Nadzifah, Y.; Nur-Amalina, R.; Umirah, N. S.

    2012-01-01

    Freshwater quality criteria for iron (Fe), lead (Pb), nickel (Ni), and zinc (Zn) were developed with particular reference to aquatic biota in Malaysia, and based on USEPA's guidelines. Acute toxicity tests were performed on eight different freshwater domestic species in Malaysia which were Macrobrachium lanchesteri (prawn), two fish: Poecilia reticulata and Rasbora sumatrana, Melanoides tuberculata (snail), Stenocypris major (ostracod), Chironomus javanus (midge larvae), Nais elinguis (annelid), and Duttaphrynus melanostictus (tadpole) to determine 96 h LC50 values for Fe, Pb, Ni, and Zn. The final acute value (FAV) for Fe, Pb, Ni, and Zn were 74.5, 17.0, 165, and 304.9 μg L−1, respectively. Using an estimated acute-to-chronic ratio (ACR) of 8.3, the value for final chronic value (FCV) was derived. Based on FAV and FCV, a criterion maximum concentration (CMC) and a criterion continuous concentration (CCC) for Fe, Pb, Ni, and Zn that are 37.2, 8.5, 82.5, and 152.4 μg L−1 and 9.0, 2.0, 19.9, and 36.7 μg L−1, respectively, were derived. The results of this study provide useful data for deriving national or local water quality criteria for Fe, Pb, Ni, and Zn based on aquatic biota in Malaysia. Based on LC50 values, this study indicated that N. elinguis, M. lanchesteri, N. elinguis, and R. sumatrana were the most sensitive to Fe, Pb, Ni, and Zn, respectively. PMID:22919358

  5. Critiquing bachelor candidates' theses: are the criteria useful?

    PubMed

    Kapborg, I; Berterö, C

    2002-06-01

    Nursing education programmes should be at an academic level and connected to research. In Sweden, empirical studies are generally required in order to obtain a Bachelor's degree; hence, in some cases, these studies are replaced by a literature review. A study was conducted using 11 criteria. Thirteen theses produced in a department of nursing science were examined, elaborated and reproduced by reviewing international and national literature. Thereafter, the criteria themselves were scrutinized. Principal findings when critiquing the theses were that in eight theses the purpose was dearly identified and well defined in relation to the study accomplished; in three theses the purpose was indistinct and vague; and in two the definitions and research questions were lacking. The topic was relevant for the area of nursing in all theses. General problems identified were poor spelling and grammar, and unsatisfactory thesis structure. This article discusses whether criteria are useful when examining the Bachelor candidates' theses. The authors report that the criteria seemed to be useful, giving some guidance for scrutinizing theses and facilitating correspondence. Criteria could be appropriate guidelines for using to increase the quality of the theses as well as the quality of nursing.

  6. Mars Sample Handling Protocol Workshop Series: Workshop 4

    NASA Technical Reports Server (NTRS)

    Race Margaret S. (Editor); DeVincenzi, Donald L. (Editor); Rummel, John D. (Editor); Acevedo, Sara E. (Editor)

    2001-01-01

    In preparation for missions to Mars that will involve the return of samples to Earth, it will be necessary to prepare for the receiving, handling, testing, distributing, and archiving of martian materials here on Earth. Previous groups and committees have studied selected aspects of sample return activities, but specific detailed protocols for the handling and testing of returned samples must still be developed. To further refine the requirements for sample hazard testing and to develop the criteria for subsequent release of sample materials from quarantine, the NASA Planetary Protection Officer convened a series of workshops in 2000-2001. The overall objective of the Workshop Series was to produce a Draft Protocol by which returned martian sample materials can be assessed for biological hazards and examined for evidence of life (extant or extinct) while safeguarding the purity of the samples from possible terrestrial contamination. This report also provides a record of the proceedings of Workshop 4, the final Workshop of the Series, which was held in Arlington, Virginia, June 5-7, 2001. During Workshop 4, the sub-groups were provided with a draft of the protocol compiled in May 2001 from the work done at prior Workshops in the Series. Then eight sub-groups were formed to discuss the following assigned topics: Review and Assess the Draft Protocol for Physical/Chemical Testing Review and Assess the Draft Protocol for Life Detection Testing Review and Assess the Draft Protocol for Biohazard Testing Environmental and Health/Monitoring and Safety Issues Requirements of the Draft Protocol for Facilities and Equipment Contingency Planning for Different Outcomes of the Draft Protocol Personnel Management Considerations in Implementation of the Draft Protocol Draft Protocol Implementation Process and Update Concepts This report provides the first complete presentation of the Draft Protocol for Mars Sample Handling to meet planetary protection needs. This Draft Protocol

  7. Criteria for acceptance to preprofessional dietetics programs vs desired qualities of professionals: an analysis.

    PubMed

    Moore, K K

    1995-01-01

    The objectives of this analysis were to examine the literature and compare and contrast (a) qualities preferred in preprofessional dietetics students by directors of internships and approved preprofessional practice programs (AP4s), (b) characteristics needed to succeed in a scientific field, (c) traits emphasized by dietetics training programs compared with those most valued by employers, (d) skills needed by high-level managerial dietitians and those in business and communications, and (e) qualities dietitians have aspired to develop for increased competitiveness in the marketplace. Even though the revised Standards of Education have been in place since 1988, recent evaluation of criteria for internship and AP4 admission has shown traditional emphasis on academic performance and the importance of work experience. Success in scientific pursuits has been linked with more than innate intelligence; a drive for success and enthusiasm for learning are also involved. Internships foster mostly technical learning, so development of skills in human and conceptual areas are somewhat lacking. These skills, which have been identified as valuable to employers, need greater development or more consistent identification in the selection and training process. Perhaps serious consideration should be given to applicants for preprofessional programs who have shown leadership qualities through extracurricular activities or who have given themselves the opportunity to develop and improve these skills. Such students might hasten the metamorphosis of dietetics practitioners toward improved levels of compensation and professional fulfillment.

  8. Can control banding be useful for the safe handling of nanomaterials? A systematic review

    NASA Astrophysics Data System (ADS)

    Eastlake, Adrienne; Zumwalde, Ralph; Geraci, Charles

    2016-06-01

    Control banding (CB) is a risk management strategy that has been used to identify and recommend exposure control measures to potentially hazardous substances for which toxicological information is limited. The application of CB and level of expertise required for implementation and management can differ depending on knowledge of the hazard potential, the likelihood of exposure, and the ability to verify the effectiveness of exposure control measures. A number of different strategies have been proposed for using CB in workplaces where exposure to engineered nanomaterials (ENMs) can occur. However, it is unclear if the use of CB can effectively reduce worker exposure to nanomaterials. A systematic review of studies was conducted to answer the question "can control banding be useful to ensure adequate controls for the safe handling of nanomaterials." A variety of databases were searched to identify relevant studies pertaining to CB. Database search terms included `control,' `hazard,' `exposure,' and `risk' banding as well as the use of these terms in the context of nanotechnology or nanomaterials. Other potentially relevant studies were identified during the review of articles obtained in the systematic review process. Identification of studies and the extraction of data were independently conducted by the reviewers. Quality of the studies was assessed using the methodological index for nonrandomized studies. The quality of the evidence was evaluated using grading of recommendations assessment, development and evaluation (GRADE). A total of 235 records were identified in the database search in which 70 records were determined to be eligible for full-text review. Only two studies were identified that met the inclusion criteria. These studies evaluated the application of the CB Nanotool in workplaces where ENMs were being handled. A total of 32 different nanomaterial handling activities were evaluated in these studies by comparing the recommended exposure controls using

  9. 2017 Draft Aquatic Life Criteria for Aluminum in Freshwater

    EPA Pesticide Factsheets

    EPA has released draft updated aluminum aquatic life ambient water quality criteria for freshwater under Section 304(a)(1) of the Clean Water Act. EPA will accept public comments on the draft criteria for 60 days upon publication in the Federal Register.

  10. 40 CFR 255.11 - Criteria for identifying agencies.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... quality management planning agencies designated under section 208 of the Federal Water Pollution Control... State water quality management agencies. (d) Planning objectives will influence agency selection... IDENTIFICATION OF REGIONS AND AGENCIES FOR SOLID WASTE MANAGEMENT Criteria for Identifying Regions and Agencies...

  11. NASA Lewis Wind Tunnel Model Systems Criteria

    NASA Technical Reports Server (NTRS)

    Soeder, Ronald H.; Haller, Henry C.

    1994-01-01

    This report describes criteria for the design, analysis, quality assurance, and documentation of models or test articles that are to be tested in the aeropropulsion facilities at the NASA Lewis Research Center. The report presents three methods for computing model allowable stresses on the basis of the yield stress or ultimate stress, and it gives quality assurance criteria for models tested in Lewis' aeropropulsion facilities. Both customer-furnished model systems and in-house model systems are discussed. The functions of the facility manager, project engineer, operations engineer, research engineer, and facility electrical engineer are defined. The format for pretest meetings, prerun safety meetings, and the model criteria review are outlined Then, the format for the model systems report (a requirement for each model that is to be tested at NASA Lewis) is described, the engineers that are responsible for developing the model systems report are listed, and the time table for its delivery to the facility manager is given.

  12. Ergonomics and patient handling.

    PubMed

    McCoskey, Kelsey L

    2007-11-01

    This study aimed to describe patient-handling demands in inpatient units during a 24-hour period at a military health care facility. A 1-day total population survey described the diverse nature and impact of patient-handling tasks relative to a variety of nursing care units, patient characteristics, and transfer equipment. Productivity baselines were established based on patient dependency, physical exertion, type of transfer, and time spent performing the transfer. Descriptions of the physiological effect of transfers on staff based on patient, transfer, and staff characteristics were developed. Nursing staff response to surveys demonstrated how patient-handling demands are impacted by the staff's physical exertion and level of patient dependency. The findings of this study describe the types of transfers occurring in these inpatient units and the physical exertion and time requirements for these transfers. This description may guide selection of the most appropriate and cost-effective patient-handling equipment required for specific units and patients.

  13. Conditioning laboratory cats to handling and transport.

    PubMed

    Gruen, Margaret E; Thomson, Andrea E; Clary, Gillian P; Hamilton, Alexandra K; Hudson, Lola C; Meeker, Rick B; Sherman, Barbara L

    2013-10-01

    As research subjects, cats have contributed substantially to our understanding of biological systems, from the development of mammalian visual pathways to the pathophysiology of feline immunodeficiency virus as a model for human immunodeficiency virus. Few studies have evaluated humane methods for managing cats in laboratory animal facilities, however, in order to reduce fear responses and improve their welfare. The authors describe a behavioral protocol used in their laboratory to condition cats to handling and transport. Such behavioral conditioning benefits the welfare of the cats, the safety of animal technicians and the quality of feline research data.

  14. Acute water quality criteria for polycyclic aromatic hydrocarbons, pesticides, plastic additives, and 4-Nonylphenol in seawater.

    PubMed

    Durán, I; Beiras, R

    2017-05-01

    Probabilistic environmental quality criteria for Naphthalene (Nap), Phenanthrene (Phe), Fluoranthene (Flu), Pyrene (Pyr), Triclosan (TCS), Tributyltin (TBT), Chlorpyrifos (CPY), Diuron (DUR), γ-Hexaclorocyclohexane (γ-HCH), Bisphenol A (BPA) and 4-Nonylphenol (4-NP) were derived from acute toxicity data using saltwater species representative of marine ecosystems, including algae, mollusks, crustaceans, echinoderms and chordates. Preferably, data concerns sublethal endpoints and early life stages from bioassays conducted in our laboratory, but the data set was completed with a broad literature survey. The Water Quality Criteria (WQC) obtained for TBT (7.1·10 -3  μg L -1 ) and CPY (6.6· 10 -3  μg L -1 ) were orders of magnitude lower than those obtained for PAHs (ranging from 3.75 to 45.2 μg L -1 ), BPA (27.7 μg L -1 ), TCS (8.66 μg L -1 ) and 4-NP (1.52 μg L -1 ). Critical values for DUR and HCH were 0.1 and 0.057 μg L -1 respectively. Within this context, non-selective toxicants could be quantitatively defined as those showing a maximum variability in toxicity thresholds (TT) of 3 orders of magnitude across the whole range of marine diversity, and a cumulative distribution of the TT fitting to a single log-logistic curve, while for selective toxicants variability was consistently found to span 5 orders of magnitude and the TT distribution showed a bimodal pattern. For the latter, protective WQC must be derived taking into account the SSD of the sensitive taxa only. Copyright © 2017 Elsevier Ltd. All rights reserved.

  15. Abnormal MRI in a patient with 'headache with neurological deficits and CSF lymphocytosis (HaNDL)'.

    PubMed

    Yilmaz, A; Kaleagasi, H; Dogu, O; Kara, E; Ozge, A

    2010-05-01

    A 27-year-old woman was admitted to the Emergency Department with right upper-extremity numbness and mild weakness followed by a bifrontal throbbing headache for 30 min, which was similar to a headache lasting for 12 h that had occurred 3 days ago. Laboratory tests were unremarkable except for cerebrospinal fluid (CSF) lymphocytic pleocytosis. On the following day, a headache episode with left hemiparesis and hemihypoaesthesia, left hemifield visio-spatial inattention, anosagnosia and confusion recurred. The headache was diagnosed as headache and neurological deficits with cerebrospinal fluid lymphocytosis (HaNDL) syndrome according to the criteria of the second edition of the International Classification of Headache Disorders. Simultaneously performed magnetic resonance imaging (MRI) revealed swelling of the grey matter, CSF enhancement in the sulci of the right temporal and occipital regions and hypoperfusion of the same brain regions. During the following 10 days two more similar episodes recurred and during the ensuing 12 months the patient remained headache free. Neuroimaging findings of the HaNDL syndrome are always thought as virtually normal. MRI abnormalities in our patient have not been reported in HaNDL syndrome previously, although they have been reported in hemiplegic migraine patients before. The findings in our case suggest that hemiplegic migraine and HaNDL syndrome may share a common pathophysiological pathway resulting in similar imaging findings and neurological symptoms.

  16. [Assessment criteria in the choice of aids for the lifting of patients].

    PubMed

    Panciera, D; Menoni, O; Ricci, M G; Occhipinti, E

    1999-01-01

    A fundamental part of the prevention strategies aimed at reducing risk due to manual handling of patients is the use of appropriate aids. This paper defines the basic types of aids for hospital wards: patient lifting devices, aids for hygiene and minor aids; and also proposes a procedure for choice of the type of aid: the procedure uses a specific protocol and also analyzes work organization and the environmental features of the ward. The proposed criteria for choice concern in the first place the fundamental requirements of the equipment: safety for operator and patient, simplicity of use and comfort for the patient. Secondly the basic determinants for choice of the type of aid are the type of disabled patient usually present in the ward and the analysis of the movements made in handling patients. On this basis, for each type of aid, the specific features are defined which direct the choice of supply for the various wards that will be adequate and effective both in reducing risk due to manual handling of patients and in improving the comfort of the patients.

  17. Comparison of Customer Preference for Bulk Material Handling Equipment through Fuzzy-AHP Approach

    NASA Astrophysics Data System (ADS)

    Sen, Kingshuk; Ghosh, Surojit; Sarkar, Bijan

    2017-06-01

    In the present study, customer's perception has played one of the important roles for selection of the exact equipment out of available alternatives. The present study is dealt with the method of optimization of selection criteria of a material handling equipment, based on the technical specifications considered to be available at the user end. In this work, the needs of customers have been identified and prioritized, that lead to the selection of number of criteria, which have direct effect upon the performance of the equipment. To check the consistency of selection criteria, first of all an AHP based methodology is adopted with the identified criteria and available product categories, based upon which, the judgments of the users are defined to derive the priority scales. Such judgments expressed the relative strength or intensity of the impact of the elements of the hierarchy. Subsequently, all the alternatives have ranked for each identified criteria with subsequent constitution of weighted matrices. The same has been compared with the normalized values of approximate selling prices of the equipments to determine individual cost-benefit ratio. Based on the cost-benefit ratio, the equipment is ranked. With same conditions, the study is obtained again with a Fuzzy AHP concept, where a fuzzy linguistic approach has reduced the amount of uncertainty in decision making, caused by conventional AHP due to lack of deterministic approach. The priority vectors of category and criteria are determined separately and multiplied to obtain composite score. Subsequently, the average of fuzzy weights was determined and the preferences of equipment are ranked.

  18. 7 CFR 1210.307 - Handle.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... AND ORDERS; MISCELLANEOUS COMMODITIES), DEPARTMENT OF AGRICULTURE WATERMELON RESEARCH AND PROMOTION PLAN Watermelon Research and Promotion Plan Definitions § 1210.307 Handle. Handle means to grade, pack...

  19. 7 CFR 1210.307 - Handle.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... AND ORDERS; MISCELLANEOUS COMMODITIES), DEPARTMENT OF AGRICULTURE WATERMELON RESEARCH AND PROMOTION PLAN Watermelon Research and Promotion Plan Definitions § 1210.307 Handle. Handle means to grade, pack...

  20. 7 CFR 1210.307 - Handle.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... AND ORDERS; MISCELLANEOUS COMMODITIES), DEPARTMENT OF AGRICULTURE WATERMELON RESEARCH AND PROMOTION PLAN Watermelon Research and Promotion Plan Definitions § 1210.307 Handle. Handle means to grade, pack...

  1. 7 CFR 1210.307 - Handle.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... AND ORDERS; MISCELLANEOUS COMMODITIES), DEPARTMENT OF AGRICULTURE WATERMELON RESEARCH AND PROMOTION PLAN Watermelon Research and Promotion Plan Definitions § 1210.307 Handle. Handle means to grade, pack...

  2. Differences in Muscle Activity During Cable Resistance Training Are Influenced by Variations in Handle Types.

    PubMed

    Rendos, Nicole K; Heredia Vargas, Héctor M; Alipio, Taislaine C; Regis, Rebeca C; Romero, Matthew A; Signorile, Joseph F

    2016-07-01

    Rendos, NK, Heredia Vargas, HM, Alipio, TC, Regis, RC, Romero, MA, and Signorile, JF. Differences in muscle activity during cable resistance training are influenced by variations in handle types. J Strength Cond Res 30(7): 2001-2009, 2016-There has been a recent resurgence in the use of cable machines for resistance training allowing movements that more effectively simulate daily activities and sports-specific movements. By necessity, these devices require a machine/human interface through some type of handle. Considerable data from material handling, industrial engineering, and exercise training studies indicate that handle qualities, especially size and shape, can significantly influence force production and muscular activity, particularly of the forearm muscles, which affect the critical link in activities that require object manipulation. The purpose for this study was to examine the influence of three different handle conditions: standard handle (StandH), ball handle with the cable between the index and middle fingers (BallIM), and ball handle with the cable between the middle and ring fingers (BallMR), on activity levels (rmsEMG) of the triceps brachii lateral and long heads (TriHLat, TriHLong), brachioradialis (BR), flexor carpi radialis (FCR), extensor carpi ulnaris, and extensor digitorum (ED) during eight repetitions of standing triceps pushdown performed from 90° to 0° elbow flexion at 1.5 s per contractile stage. Handle order was randomized. No significant differences were seen for triceps or BR rmsEMG across handle conditions; however, relative patterns of activation did vary for the forearm muscles by handle condition, with more coordinated activation levels for the FCR and ED during the ball handle conditions. In addition, the rmsEMG for the ED was significantly higher during the BallIM than any other condition and during the BallMR than the StandH. These results indicate that the use of ball handles with the cable passing between different fingers

  3. Grain Handling and Storage.

    ERIC Educational Resources Information Center

    Harris, Troy G.; Minor, John

    This text for a secondary- or postecondary-level course in grain handling and storage contains ten chapters. Chapter titles are (1) Introduction to Grain Handling and Storage, (2) Elevator Safety, (3) Grain Grading and Seed Identification, (4) Moisture Control, (5) Insect and Rodent Control, (6) Grain Inventory Control, (7) Elevator Maintenance,…

  4. Inspection criteria ensure quality control of parallel gap soldering

    NASA Technical Reports Server (NTRS)

    Burka, J. A.

    1968-01-01

    Investigation of parallel gap soldering of electrical leads resulted in recommendation on material preparation, equipment, process control, and visual inspection criteria to ensure reliable solder joints. The recommendations will minimize problems in heat-dwell time, amount of solder, bridging conductors, and damage of circuitry.

  5. Nonlinear Flying Qualities Criteria for Large-Amplitude Maneuvers

    DTIC Science & Technology

    1984-12-01

    theory which are pertinent to the formation of a nonlinear flying qualities methodology. This report surveys nonlinear system theory and describes...the development of an applied flying qualities methodology based on a canonical system theory and using research in relative controllability...The Nonlinear Flying Qualities (NFQ) for Large-Amplitude Maneuvers Program examined promising techniques from nonlinear analysis and nonlinear system

  6. Summary of the effects of engine throttle response on airplane formation-flying qualities

    NASA Technical Reports Server (NTRS)

    Walsh, Kevin R.

    1992-01-01

    A flight evaluation as conducted to determine the effect of engine throttle response characteristics on precision formation-flying qualities. A variable electronic throttle control system was developed and flight-tested on a TF-104G airplane with a J79-11B engine at the NASA Dryden Flight Research Facility. Ten research flights were flown to evaluate the effects of throttle gain, time delay, and fuel control rate limiting on engine handling qualities during a demanding precision wing formation task. Handling quality effects of lag filters and lead compensation time delays were also evaluated. Data from pilot ratings and comments indicate that throttle control system time delays and rate limits cause significant degradations in handling qualities. Threshold values for satisfactory (level 1) and adequate (level 2) handling qualities of these key variables are presented.

  7. 7 CFR 905.9 - Handle or ship.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... 7 Agriculture 8 2011-01-01 2011-01-01 false Handle or ship. 905.9 Section 905.9 Agriculture Regulations of the Department of Agriculture (Continued) AGRICULTURAL MARKETING SERVICE (Marketing Agreements... TANGELOS GROWN IN FLORIDA Order Regulating Handling Definitions § 905.9 Handle or ship. Handle or ship...

  8. 7 CFR 948.8 - Handle or ship.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... 7 Agriculture 8 2011-01-01 2011-01-01 false Handle or ship. 948.8 Section 948.8 Agriculture Regulations of the Department of Agriculture (Continued) AGRICULTURAL MARKETING SERVICE (Marketing Agreements... Order Regulating Handling Definitions § 948.8 Handle or ship. Handle or ship means to transport, sell...

  9. 7 CFR 905.9 - Handle or ship.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... 7 Agriculture 8 2014-01-01 2014-01-01 false Handle or ship. 905.9 Section 905.9 Agriculture Regulations of the Department of Agriculture (Continued) AGRICULTURAL MARKETING SERVICE (MARKETING AGREEMENTS... TANGELOS GROWN IN FLORIDA Order Regulating Handling Definitions § 905.9 Handle or ship. Handle or ship...

  10. 7 CFR 905.9 - Handle or ship.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... 7 Agriculture 8 2012-01-01 2012-01-01 false Handle or ship. 905.9 Section 905.9 Agriculture Regulations of the Department of Agriculture (Continued) AGRICULTURAL MARKETING SERVICE (Marketing Agreements... TANGELOS GROWN IN FLORIDA Order Regulating Handling Definitions § 905.9 Handle or ship. Handle or ship...

  11. 7 CFR 948.8 - Handle or ship.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... 7 Agriculture 8 2013-01-01 2013-01-01 false Handle or ship. 948.8 Section 948.8 Agriculture Regulations of the Department of Agriculture (Continued) AGRICULTURAL MARKETING SERVICE (MARKETING AGREEMENTS... Order Regulating Handling Definitions § 948.8 Handle or ship. Handle or ship means to transport, sell...

  12. 7 CFR 905.9 - Handle or ship.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... 7 Agriculture 8 2013-01-01 2013-01-01 false Handle or ship. 905.9 Section 905.9 Agriculture Regulations of the Department of Agriculture (Continued) AGRICULTURAL MARKETING SERVICE (MARKETING AGREEMENTS... TANGELOS GROWN IN FLORIDA Order Regulating Handling Definitions § 905.9 Handle or ship. Handle or ship...

  13. 7 CFR 948.8 - Handle or ship.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... 7 Agriculture 8 2014-01-01 2014-01-01 false Handle or ship. 948.8 Section 948.8 Agriculture Regulations of the Department of Agriculture (Continued) AGRICULTURAL MARKETING SERVICE (MARKETING AGREEMENTS... Order Regulating Handling Definitions § 948.8 Handle or ship. Handle or ship means to transport, sell...

  14. 7 CFR 948.8 - Handle or ship.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... 7 Agriculture 8 2012-01-01 2012-01-01 false Handle or ship. 948.8 Section 948.8 Agriculture Regulations of the Department of Agriculture (Continued) AGRICULTURAL MARKETING SERVICE (Marketing Agreements... Order Regulating Handling Definitions § 948.8 Handle or ship. Handle or ship means to transport, sell...

  15. FUEL HANDLING MECHANISM

    DOEpatents

    Koch, L.J.; Hutter, E.

    1960-02-01

    A remotely operable handling device specifically adapted for the handling of vertically disposed fuel rods in a nuclear reactor was developed. The device consists essentially of an elongated tubular member having a gripping device at the lower end of the pivoted jaw type adapted to grip an enlarged head on the upper end of the workpiece. The device includes a sensing element which engages the enlarged head and is displaced to remotely indicate when the workpiece is in the proper position to be engaged by the jaws.

  16. Development of water quality criteria and screening benchmarks for 2,4,6 trinitrotoluene

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Talmage, S.S.; Opresko, D.M.

    1995-12-31

    Munitions compounds and their degradation products are present at many Army Ammunition Plant Superfund sites. Neither Water Quality Criteria (WQC) for aquatic organisms nor safe soil levels for terrestrial plants and animals have been developed for munitions compounds including trinitrotoluene (TNT). Data are available for the calculation of an acute WQC for TNT according to US EPA guidelines but are insufficient to calculate a chronic criterion. However, available data can be used to determine a Secondary Chronic Value (SCV) and to determine lowest chronic values for fish and daphnids (used by EPA in the absence of criteria). Based on datamore » from eight genera of aquatic organisms, an acute WOC of 0.566 mg/L was calculated. Using available data, a SCV of 0.137 mg/L was calculated. Lowest chronic values for fish and for daphnids are 0.04 mg/L and 1.03 mg/L, respectively. The lowest concentration that affected the growth of aquatic plants was 1.0 mg/L. For terrestrial animals, data from studies of laboratory animals can be extrapolated to derive screening benchmarks in the same way in which human toxicity values are derived from laboratory animal data. For terrestrial animals, a no-observed-adverse-effect-level (NOAEL) for reproductive effects of 1.60 mg/kg/day was determined from a subchronic laboratory feeding study with rats. By scaling the test NOAEL on the basis of differences in body size, screening benchmarks were calculated for oral intake for selected mammalian wildlife species. Screening benchmarks were also derived for protection of benthic organisms in sediment, for soil invertebrates, and for terrestrial plants.« less

  17. Neonatal handling (resilience) attenuates water-avoidance stress induced enhancement of chronic mechanical hyperalgesia in the rat

    PubMed Central

    Alvarez, Pedro; Levine, Jon D.; Green, Paul G.

    2015-01-01

    Chronic stress is well known to exacerbate pain. We tested the hypothesis that neonatal handling, which induces resilience to the negative impact of stress by increasing the quality and quantity of maternal care, attenuates the mechanical hyperalgesia produced by water-avoidance stress in the adult rat. Neonatal male rats underwent the handling protocol on postnatal days 2–9, weaned at 21 days and tested for muscle mechanical nociceptive threshold at postnatal days 50–75. Decrease in mechanical nociceptive threshold in skeletal muscle in adult rats, produced by exposure to water-avoidance stress, was significantly attenuated by neonatal handling. Neonatal handling also attenuated the mechanical hyperalgesia produced by intramuscular administration of the pronociceptive inflammatory mediator, prostaglandin E2 in rats exposed as adults to water-avoidance stress. Neonatal handling, which induces a smaller corticosterone response in adult rats exposed to a stressor as well as changes in central nervous system neurotransmitter systems, attenuates mechanical hyperalgesia produced by water-avoidance stress and enhanced prostaglandin hyperalgesia in adult animals. PMID:25637700

  18. 7 CFR 58.443 - Whey handling.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 7 Agriculture 3 2010-01-01 2010-01-01 false Whey handling. 58.443 Section 58.443 Agriculture... Procedures § 58.443 Whey handling. (a) Adequate sanitary facilities shall be provided for the handling of whey. If outside, necessary precautions shall be taken to minimize flies, insects and development of...

  19. 7 CFR 945.9 - Ship or handle.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... 7 Agriculture 8 2011-01-01 2011-01-01 false Ship or handle. 945.9 Section 945.9 Agriculture... DESIGNATED COUNTIES IN IDAHO, AND MALHEUR COUNTY, OREGON Order Regulating Handling Definitions § 945.9 Ship or handle. Ship or handle means to pack, sell, consign, transport or in any other way to place...

  20. 7 CFR 927.8 - Ship or handle.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 7 Agriculture 8 2010-01-01 2010-01-01 false Ship or handle. 927.8 Section 927.8 Agriculture... Order Regulating Handling Definitions § 927.8 Ship or handle. Ship or handle means to sell, deliver, consign, transport or ship pears within the production area or between the production area and any point...

  1. 7 CFR 927.8 - Ship or handle.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... 7 Agriculture 8 2011-01-01 2011-01-01 false Ship or handle. 927.8 Section 927.8 Agriculture... Order Regulating Handling Definitions § 927.8 Ship or handle. Ship or handle means to sell, deliver, consign, transport or ship pears within the production area or between the production area and any point...

  2. 7 CFR 945.9 - Ship or handle.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 7 Agriculture 8 2010-01-01 2010-01-01 false Ship or handle. 945.9 Section 945.9 Agriculture... DESIGNATED COUNTIES IN IDAHO, AND MALHEUR COUNTY, OREGON Order Regulating Handling Definitions § 945.9 Ship or handle. Ship or handle means to pack, sell, consign, transport or in any other way to place...

  3. 7 CFR 927.8 - Ship or handle.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... 7 Agriculture 8 2013-01-01 2013-01-01 false Ship or handle. 927.8 Section 927.8 Agriculture... Order Regulating Handling Definitions § 927.8 Ship or handle. Ship or handle means to sell, deliver, consign, transport or ship pears within the production area or between the production area and any point...

  4. 7 CFR 945.9 - Ship or handle.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... 7 Agriculture 8 2013-01-01 2013-01-01 false Ship or handle. 945.9 Section 945.9 Agriculture... DESIGNATED COUNTIES IN IDAHO, AND MALHEUR COUNTY, OREGON Order Regulating Handling Definitions § 945.9 Ship or handle. Ship or handle means to pack, sell, consign, transport or in any other way to place...

  5. 7 CFR 927.8 - Ship or handle.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... 7 Agriculture 8 2012-01-01 2012-01-01 false Ship or handle. 927.8 Section 927.8 Agriculture... Order Regulating Handling Definitions § 927.8 Ship or handle. Ship or handle means to sell, deliver, consign, transport or ship pears within the production area or between the production area and any point...

  6. 7 CFR 927.8 - Ship or handle.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... 7 Agriculture 8 2014-01-01 2014-01-01 false Ship or handle. 927.8 Section 927.8 Agriculture... Order Regulating Handling Definitions § 927.8 Ship or handle. Ship or handle means to sell, deliver, consign, transport or ship pears within the production area or between the production area and any point...

  7. Diet quality and cognitive function in an urban sample: findings from the Healthy Aging in Neighborhoods of Diversity across the Life Span (HANDLS) study.

    PubMed

    Wright, Regina S; Waldstein, Shari R; Kuczmarski, Marie Fanelli; Pohlig, Ryan T; Gerassimakis, Constance S; Gaynor, Beatrice; Evans, Michele K; Zonderman, Alan B

    2017-01-01

    Poor diet quality contributes to morbidity, including poor brain health outcomes such as cognitive decline and dementia. African Americans and individuals living in poverty may be at greater risk for cognitive decrements from poor diet quality. Cross-sectional. Baltimore, MD, USA. Participants were 2090 African Americans and Whites (57 % female, mean age=47·9 years) who completed two 24 h dietary recalls. We examined cognitive performance and potential interactions of diet quality with race and poverty status using baseline data from the Healthy Aging in Neighborhoods of Diversity across the Life Span (HANDLS) study. Healthy Eating Index-2010 (HEI-2010) scores were calculated and interpreted using federal guidelines. A neurocognitive test battery was administered to evaluate cognitive function over several domains. Linear regression analyses showed that lower HEI-2010 scores were associated with poorer verbal learning and memory (P<0·05) after adjustment for covariates. Diet quality within the sample was poor. Significant interactions of HEI-2010 and poverty status (all P<0·05) indicated that higher diet quality was associated with higher performance on tests of attention and cognitive flexibility, visuospatial ability and perceptual speed among those below the poverty line. No significant race interactions emerged. Higher diet quality was associated with better performance on two measures of verbal learning and memory, irrespective of race and poverty status. Findings suggest that diet quality and cognitive function are likely related at the population level. Future research is needed to determine whether the association is clinically significant.

  8. Improving the quality of obstetric care for women with obstructed labour in the national referral hospital in Uganda: lessons learnt from criteria based audit.

    PubMed

    Kayiga, Herbert; Ajeani, Judith; Kiondo, Paul; Kaye, Dan K

    2016-07-11

    Obstructed labour remains a major cause of maternal morbidity and mortality whose complications can be reduced with improved quality of obstetric care. The objective was to assess whether criteria-based audit improves quality of obstetric care provided to women with obstructed labour in Mulago hospital, Uganda. Using criteria-based audit, management of obstructed labour was analyzed prospectively in two audits. Six standards of care were compared. An initial audit of 180 patients was conducted in September/October 2013. The Audit results were shared with key stakeholders. Gaps in patient management were identified and recommendations for improving obstetric care initiated. Six standards of care (intravenous fluids, intravenous antibiotics, monitoring of maternal vital signs, bladder catheterization, delivery within two hours, and blood grouping and cross matching) were implemented. A re-audit of 180 patients with obstructed labour was conducted four months later to evaluate the impact of these recommendations. The results of the two audits were compared. In-depth interviews and focus group discussions were conducted among healthcare providers to identify factors that could have influenced the audit results. There was improvement in two standards of care (intravenous fluids and intravenous antibiotic administration) 58.9 % vs. 86.1 %; p < 0.001 and 21.7 % vs. 50.5 %; P < 0.001 respectively after the second audit. There was no improvement in vital sign monitoring, delivery within two hours or blood grouping and cross matching. There was a decline in bladder catheterization (94 % vs. 68.9 %; p < 0.001. The overall mean care score in the first and second audits was 55.1 and 48.2 % respectively, p = 0.19. Healthcare factors (negative attitude, low numbers, poor team work, low motivation), facility factors (poor supervision, stock-outs of essential supplies, absence of protocols) and patient factors (high patient load, poor compliance to

  9. Pre-slaughter sound levels and pre-slaughter handling from loading at the farm till slaughter influence pork quality.

    PubMed

    Vermeulen, L; Van de Perre, V; Permentier, L; De Bie, S; Verbeke, G; Geers, R

    2016-06-01

    This study investigates the relationship between sound levels, pre-slaughter handling during loading and pork quality. Pre-slaughter variables were investigated from loading till slaughter. A total of 3213 pigs were measured 30 min post-mortem for pH(30LT) (M. Longissimus thoracis). First, a sound level model for the risk to develop PSE meat was established. The difference in maximum and mean sound level during loading, mean sound level during lairage and mean sound level prior to stunning remained significant within the model. This indicated that sound levels during loading had a significant added value to former sound models. Moreover, this study completed the global classification checklist (Vermeulen et al., 2015a) by developing a linear mixed model for pH(30LT) and PSE prevalence, with the difference in maximum and mean sound level measured during loading, the feed withdrawal period and the difference in temperature during loading and lairage. Hence, this study provided new insights over previous research where loading procedures were not included. Copyright © 2016 Elsevier Ltd. All rights reserved.

  10. Pre-slaughter stress and pork quality

    NASA Astrophysics Data System (ADS)

    Stajković, S.; Teodorović, V.; Baltić, M.; Karabasil, N.

    2017-09-01

    Stress is an inevitable consequence of handling of animals for slaughter. Stress conditions during transport, lairage and at slaughter induce undesirable effects on the end quality of meat such as pale, soft, exudative meat and dark firm dry meat. Hence, it is very important to define appropriate parameters for objective assessment of level of stress. Attempts to define measures of stress have been difficult and no physiological parameter has been successfully used to evaluate stress situations. One physiological change in swine associated with animal handling stress and with pork quality is an increase in blood lactate concentration. Plasma cortisol was thought to be an appropriate indicator of stress, but the concentration was not consistently changed by different stressors. Therefore, finding alternative parameters reacting to stressors, such as acute phase proteins, would be of great value for the objective evaluation of level of stress and meat quality. As the stress during pre-slaughter handling is unavoidable, the final goal is to improve transport and slaughter conditions for the animal and, as a consequence, meat quality and animal welfare.

  11. Recommendations for Collection and Handling of Specimens From Group Breast Cancer Clinical Trials

    PubMed Central

    Leyland-Jones, Brian R.; Ambrosone, Christine B.; Bartlett, John; Ellis, Matthew J.C.; Enos, Rebecca A.; Raji, Adekunle; Pins, Michael R.; Zujewski, Jo Anne; Hewitt, Stephen M.; Forbes, John F.; Abramovitz, Mark; Braga, Sofia; Cardoso, Fatima; Harbeck, Nadia; Denkert, Carsten; Jewell, Scott D.

    2008-01-01

    Recommendations for specimen collection and handling have been developed for adoption across breast cancer clinical trials conducted by the Breast International Group (BIG)-sponsored Groups and the National Cancer Institute (NCI)-sponsored North American Cooperative Groups. These recommendations are meant to promote identifiable standards for specimen collection and handling within and across breast cancer trials, such that the variability in collection/handling practices that currently exists is minimized and specimen condition and quality are enhanced, thereby maximizing results from specimen-based diagnostic testing and research. Three working groups were formed from the Cooperative Group Banking Committee, BIG groups, and North American breast cancer cooperative groups to identify standards for collection and handling of (1) formalin-fixed, paraffin-embedded (FFPE) tissue; (2) blood and its components; and (3) fresh/frozen tissue from breast cancer trials. The working groups collected standard operating procedures from multiple group specimen banks, administered a survey on banking practices to those banks, and engaged in a series of discussions from 2005 to 2007. Their contributions were synthesized into this document, which focuses primarily on collection and handling of specimens to the point of shipment to the central bank, although also offers some guidance to central banks. Major recommendations include submission of an FFPE block, whole blood, and serial serum or plasma from breast cancer clinical trials, and use of one fixative and buffer type (10% neutral phosphate-buffered formalin, pH 7) for FFPE tissue across trials. Recommendations for proper handling and shipping were developed for blood, serum, plasma, FFPE, and fresh/frozen tissue. PMID:18955459

  12. Bandwidth and SIMDUCE as simulator fidelity criteria

    NASA Technical Reports Server (NTRS)

    Key, David

    1992-01-01

    The potential application of two concepts from the new Handling Qualities Specification for Military Rotorcraft was discussed. The first concept is bandwidth, a measure of the dynamic response to control. The second is a qualitative technique developed for assessing the visual cue environment the pilot has in bad weather and at night. Simulated Day Usable Cue Environment (SIMDUCE) applies this concept to assessing the day cuing fidelity in the simulator.

  13. Estimating criteria pollutant emissions using the California Regional Multisector Air Quality Emissions (CA-REMARQUE) model v1.0

    NASA Astrophysics Data System (ADS)

    Zapata, Christina B.; Yang, Chris; Yeh, Sonia; Ogden, Joan; Kleeman, Michael J.

    2018-04-01

    The California Regional Multisector Air Quality Emissions (CA-REMARQUE) model is developed to predict changes to criteria pollutant emissions inventories in California in response to sophisticated emissions control programs implemented to achieve deep greenhouse gas (GHG) emissions reductions. Two scenarios for the year 2050 act as the starting point for calculations: a business-as-usual (BAU) scenario and an 80 % GHG reduction (GHG-Step) scenario. Each of these scenarios was developed with an energy economic model to optimize costs across the entire California economy and so they include changes in activity, fuels, and technology across economic sectors. Separate algorithms are developed to estimate emissions of criteria pollutants (or their precursors) that are consistent with the future GHG scenarios for the following economic sectors: (i) on-road, (ii) rail and off-road, (iii) marine and aviation, (iv) residential and commercial, (v) electricity generation, and (vi) biorefineries. Properly accounting for new technologies involving electrification, biofuels, and hydrogen plays a central role in these calculations. Critically, criteria pollutant emissions do not decrease uniformly across all sectors of the economy. Emissions of certain criteria pollutants (or their precursors) increase in some sectors as part of the overall optimization within each of the scenarios. This produces nonuniform changes to criteria pollutant emissions in close proximity to heavily populated regions when viewed at 4 km spatial resolution with implications for exposure to air pollution for those populations. As a further complication, changing fuels and technology also modify the composition of reactive organic gas emissions and the size and composition of particulate matter emissions. This is most notably apparent through a comparison of emissions reductions for different size fractions of primary particulate matter. Primary PM2.5 emissions decrease by 4 % in the GHG-Step scenario vs

  14. 45 CFR 1388.2 - Program criteria-purpose.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... DISABILITIES PROGRAM THE UNIVERSITY AFFILIATED PROGRAMS § 1388.2 Program criteria—purpose. The program criteria will be used to assess the quality of the University Affiliated Programs (UAP). The overall purpose of...

  15. 45 CFR 1388.2 - Program criteria-purpose.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... DISABILITIES PROGRAM THE UNIVERSITY AFFILIATED PROGRAMS § 1388.2 Program criteria—purpose. The program criteria will be used to assess the quality of the University Affiliated Programs (UAP). The overall purpose of...

  16. 45 CFR 1388.2 - Program criteria-purpose.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... DISABILITIES PROGRAM THE UNIVERSITY AFFILIATED PROGRAMS § 1388.2 Program criteria—purpose. The program criteria will be used to assess the quality of the University Affiliated Programs (UAP). The overall purpose of...

  17. 45 CFR 1388.2 - Program criteria-purpose.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... DISABILITIES PROGRAM THE UNIVERSITY AFFILIATED PROGRAMS § 1388.2 Program criteria—purpose. The program criteria will be used to assess the quality of the University Affiliated Programs (UAP). The overall purpose of...

  18. Decision method for optimal selection of warehouse material handling strategies by production companies

    NASA Astrophysics Data System (ADS)

    Dobos, P.; Tamás, P.; Illés, B.

    2016-11-01

    Adequate establishment and operation of warehouse logistics determines the companies’ competitiveness significantly because it effects greatly the quality and the selling price of the goods that the production companies produce. In order to implement and manage an adequate warehouse system, adequate warehouse position, stock management model, warehouse technology, motivated work force committed to process improvement and material handling strategy are necessary. In practical life, companies have paid small attantion to select the warehouse strategy properly. Although it has a major influence on the production in the case of material warehouse and on smooth costumer service in the case of finished goods warehouse because this can happen with a huge loss in material handling. Due to the dynamically changing production structure, frequent reorganization of warehouse activities is needed, on what the majority of the companies react basically with no reactions. This work presents a simulation test system frames for eligible warehouse material handling strategy selection and also the decision method for selection.

  19. HAND TRUCK FOR HANDLING EQUIPMENT

    DOEpatents

    King, D.W.

    1959-02-24

    A truck is described for the handling of large and relatively heavy pieces of equipment and particularly for the handling of ion source units for use in calutrons. The truck includes a chassis and a frame pivoted to the chassis so as to be operable to swing in the manner of a boom. The frame has spaced members so arranged that the device to be handled can be suspended between or passed between these spaced members and also rotated with respect to the frame when the device is secured to the spaced members.

  20. A Strategy to Identify Critical Appraisal Criteria for Primary Mixed-Method Studies

    PubMed Central

    Sale, Joanna E. M.; Brazil, Kevin

    2015-01-01

    The practice of mixed-methods research has increased considerably over the last 10 years. While these studies have been criticized for violating quantitative and qualitative paradigmatic assumptions, the methodological quality of mixed-method studies has not been addressed. The purpose of this paper is to identify criteria to critically appraise the quality of mixed-method studies in the health literature. Criteria for critically appraising quantitative and qualitative studies were generated from a review of the literature. These criteria were organized according to a cross-paradigm framework. We recommend that these criteria be applied to a sample of mixed-method studies which are judged to be exemplary. With the consultation of critical appraisal experts and experienced qualitative, quantitative, and mixed-method researchers, further efforts are required to revise and prioritize the criteria according to importance. PMID:26526412

  1. Linking fish tolerance to water quality criteria for the assessment of environmental flows: A practical method for streamflow regulation and pollution control.

    PubMed

    Zhao, Changsen; Yang, Shengtian; Liu, Junguo; Liu, Changming; Hao, Fanghua; Wang, Zhonggen; Zhang, Huitong; Song, Jinxi; Mitrovic, Simon M; Lim, Richard P

    2018-05-15

    The survival of aquatic biota in stream ecosystems depends on both water quantity and quality, and is particularly susceptible to degraded water quality in regulated rivers. Maintenance of environmental flows (e-flows) for aquatic biota with optimum water quantity and quality is essential for sustainable ecosystem services, especially in developing regions with insufficient stream monitoring of hydrology, water quality and aquatic biota. Few e-flow methods are available that closely link aquatic biota tolerances to pollutant concentrations in a simple and practical manner. In this paper a new method was proposed to assess e-flows that aimed to satisfy the requirements of aquatic biota for both the quantity and quality of the streamflow by linking fish tolerances to water quality criteria, or the allowable concentration of pollutants. For better operation of water projects and control of pollutants discharged into streams, this paper presented two coefficients for streamflow adjustment and pollutant control. Assessment of e-flows in the Wei River, the largest tributary of the Yellow River, shows that streamflow in dry seasons failed to meet e-flow requirements. Pollutant influx exerted a large pressure on the aquatic ecosystem, with pollutant concentrations much higher than that of the fish tolerance thresholds. We found that both flow velocity and water temperature exerted great influences on the pollutant degradation rate. Flow velocity had a much greater influence on pollutant degradation than did the standard deviation of flow velocity. This study provides new methods to closely link the tolerance of aquatic biota to water quality criteria for e-flow assessment. The recommended coefficients for streamflow adjustment and pollutant control, to dynamically regulate streamflow and control pollutant discharge, are helpful for river management and ecosystems rehabilitation. The relatively low data requirement also makes the method easy to use efficiently in developing

  2. Selecting wool-type fabrics for sensorial comfort in women office clothing for the cold season, using the multi-criteria decision analysis

    NASA Astrophysics Data System (ADS)

    Harpa, Rodica

    2017-10-01

    This article presents the strategy and the procedure used to achieve the declared goal: fabrics selection, pursuing sensorial comfort of a specific women-clothing item, by using the multi-criteria decision analysis. First, the objective evaluation of seven wool-type woven fabrics, suitable to the quality profile expected for the defined destination, was accomplished. Then, a survey was conducted on a sample of 187 consumers, women aged between 18 to 60 years old, with a background in the textile field, regarding both the preferences manifested in purchasing products, and the importance of various sensory perceptions through handling materials used in clothing products. Finally, the MCDM applied through the implementation of previous accomplished software STAT-ADM, allowed choosing the preferred wool-type fabric in order to get the expected sensorial comfort of women office trousers for the cold season, according to the previously established criteria. This overall approach showed good results in fabrics selection for assuring the sensorial comfort in women’s clothing, by using the multicriteria decision analysis based on a rating scale delivered by customers with knowledge in the textile field, but non-experts in the fabrics hand evaluation topic.

  3. Can Control Banding be Useful for the Safe Handling of Nanomaterials? A Systematic Review

    PubMed Central

    Eastlake, Adrienne; Zumwalde, Ralph; Geraci, Charles

    2016-01-01

    Objectives Control banding (CB) is a risk management strategy that has been used to identify and recommend exposure control measures to potentially hazardous substances for which toxicological information is limited. The application of CB and level of expertise required for implementation and management can differ depending on knowledge of the hazard potential, the likelihood of exposure, and the ability to verify the effectiveness of exposure control measures. A number of different strategies have been proposed for using CB in workplaces where exposure to engineered nanomaterials (ENMs) can occur. However, it is unclear if the use of CB can effectively reduce worker exposure to nanomaterials. A systematic review of studies was conducted to answer the question “can control banding be useful to ensure adequate controls for the safe handling of nanomaterials.” Methods A variety of databases were searched to identify relevant studies pertaining to CB. Database search terms included ‘control’, ‘hazard’, ‘exposure’ and ‘risk’ banding as well as the use of these terms in the context of nanotechnology or nanomaterials. Other potentially relevant studies were identified during the review of articles obtained in the systematic review process. Identification of studies and the extraction of data were independently conducted by the reviewers. Quality of the studies was assessed using the Methodological Index for Non-Randomized Studies (MINORS). The quality of the evidence was evaluated using Grading of Recommendations Assessment, Development and Evaluation (GRADE). Results A total of 235 records were identified in the database search in which 70 records were determined to be eligible for full-text review. Only two studies were identified that met the inclusion criteria. These studies evaluated the application of the CB Nanotool in workplaces where ENMs were being handled. A total of 32 different nanomaterial handling activities were evaluated in these

  4. STOPP/START Medication Criteria Modified for US Nursing Home Setting

    PubMed Central

    Khodyakov, Dmitry; Ochoa, Aileen; Olivieri-Mui, Brianne L.; Bouwmeester, Carla; Zarowitz, Barbara J.; Patel, Meenakshi; Ching, Diana; Briesacher, Becky

    2016-01-01

    STRUCTURED ABSTRACT BACKGROUND/OBJECTIVES A barrier to assessing the quality of prescribing in nursing homes (NH) is the lack of explicit criteria for this setting. Our objective was to develop a set of prescribing indicators measurable with available data from electronic nursing home databases by adapting the European-based 2014 STOPP/START criteria of potentially inappropriate and underused medications for the US setting. DESIGN A two-stage expert panel process. In first stage, investigator team reviewed 114 criteria for compatibility and measurability. In second stage, we convened an online modified e-Delphi (OMD) panel to rate the validity of criteria and two webinars to identify criteria with highest relevance to US NHs. PARTICIPANTS Seventeen experts with recognized reputations in NH care participated in the e-Delphi panel and 12 in the webinar. MEASUREMENTS Compatibility and measurability were assessed by comparing criteria to US terminology/setting standards and data elements in NH databases. Validity was rated with a 9-point Likert-type scale (1=not valid at all, 9=highly valid). Mean, median, interpercentile ranges, and agreement were determined for each criterion score. Relevance was determined by ranking the mean panel ratings on criteria that reached agreement; half of the criteria with the highest mean values were reviewed and approved by the webinar participants. RESULTS Fifty-three STOPP/START criteria were deemed as compatible with US setting and measurable using data from electronic NH databases. E-Delphi panelists rated 48 criteria as valid for US NHs. Twenty-four criteria were deemed as most relevant, consisting of 22 measures of potentially inappropriate medications and 2 measures of underused medications. CONCLUSION This study created the first explicit criteria for assessing the quality of prescribing in US NHs. PMID:28008599

  5. Dysphagia screening after acute stroke: a quality improvement project using criteria-based clinical audit.

    PubMed

    Sivertsen, Jorun; Graverholt, Birgitte; Espehaug, Birgitte

    2017-01-01

    Dysphagia is common after stroke and represents a major risk factor for developing aspiration pneumonia. Early detection can reduce the risk of pulmonary complications and death. Despite the fact that evidence-based guidelines recommend screening for swallowing deficit using a standardized screening tool, national audits has identified a gap between practice and this recommendation. The aim was to determine the level of adherence to an evidence-based recommendation on swallow assessment and to take actions to improve practice if necessary. We carried out a criteria-based clinical audit (CBCA) in a small stroke unit at a Norwegian hospital. Patients with hemorrhagic stroke, ischemic stroke and transient ischemic attack were included. A power calculation informed the number of included patients at baseline ( n  = 80) and at re-audit ( n  = 35). We compared the baseline result with the evidence-based criteria and gave feedback to management and staff. A brainstorming session, a root-cause analysis and implementation science were used to inform the quality improvement actions which consisted of workshops, use of local opinion leaders, manual paper reminders and feedback. We completed a re-audit after implementation. Percentages and median are reported with 95% confidence intervals (CI). Among 88 cases at baseline, documentation of swallow screening was complete for 6% (95% CI 2-11). In the re-audit ( n  = 51) 61% (95% CI 45-74) had a complete screening. A CBCA involving management and staff, and using multiple tailored intervention targeting barriers, led to greater adherence with the recommendation for screening stroke patients for dysphagia.

  6. The combination matters - distinct impact of lifestyle factors on sperm quality: a study on semen analysis of 1683 patients according to MSOME criteria

    PubMed Central

    2012-01-01

    Background Poor sperm quality can negatively affect embryonic development and IVF outcome. This study is aimed at investigating the influence of various lifestyle factors on semen quality according to MSOME (motile sperm organelle morphology examination) criteria. Methods 1683 male patients undergoing assisted reproductive technologies (ART) in our clinic were surveyed about their age, BMI (body mass index), ejaculation frequency, nutrition, sports, sleeping habits and social behavior. Semen samples were collected and evaluation of semen parameters according to MSOME and WHO criteria was performed. Results were grouped and statistically analyzed. Results Although single parameters had minor effects on sperm parameter, the combination of age, BMI, coffee intake, ejaculatory frequency and duration of sexual abstinence were identified as factors having a negative effect on sperm motility. Additionally, we could demonstrate that MSOME quality was reduced. The negative impact of age, BMI and coffee intake on sperm quality could be compensated if patients had a high ejaculation frequency and shorter periods of sexual abstinence. Conclusions Combinations of adverse lifestyle factors could have a detrimental impact on sperm, not only in terms of motility and sperm count but also in terms of sperm head vacuolization. This negative impact was shown to be compensated by higher ejaculation frequency and a shorter period of sexual abstinence. The compensation is most likely due to a shorter storage time in the male gonads, thus reducing the duration of sperms’ exposure to reactive oxygen species (ROS). PMID:23265183

  7. Handling an Asthma Flare-Up

    MedlinePlus

    ... Videos for Educators Search English Español Handling an Asthma Flare-Up KidsHealth / For Kids / Handling an Asthma ... español Cómo controlar las crisis asmáticas What's an Asthma Flare-Up? If you have asthma , you probably ...

  8. 7 CFR 1205.312 - Handle.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... AND ORDERS; MISCELLANEOUS COMMODITIES), DEPARTMENT OF AGRICULTURE COTTON RESEARCH AND PROMOTION Cotton Research and Promotion Order Definitions § 1205.312 Handle. Handle means to harvest, gin, warehouse, compress, purchase, market, transport, or otherwise acquire ownership or control of cotton. [31 FR 16758...

  9. 7 CFR 983.14 - Handle.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... Orders; Fruits, Vegetables, Nuts), DEPARTMENT OF AGRICULTURE PISTACHIOS GROWN IN CALIFORNIA, ARIZONA, AND NEW MEXICO Definitions § 983.14 Handle. Handle means to engage in: (a) Receiving pistachios; (b) Hulling and drying pistachios; (c) Further preparing pistachios by sorting, sizing, shelling, roasting...

  10. 7 CFR 1219.11 - Handle.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... AND ORDERS; MISCELLANEOUS COMMODITIES), DEPARTMENT OF AGRICULTURE HASS AVOCADO PROMOTION, RESEARCH, AND INFORMATION Hass Avocado Promotion, Research, and Information Order Definitions § 1219.11 Handle. Handle means to pack, process, transport, purchase, or in any other way to place or cause Hass avocados...

  11. 7 CFR 1219.11 - Handle.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... AND ORDERS; MISCELLANEOUS COMMODITIES), DEPARTMENT OF AGRICULTURE HASS AVOCADO PROMOTION, RESEARCH, AND INFORMATION Hass Avocado Promotion, Research, and Information Order Definitions § 1219.11 Handle. Handle means to pack, process, transport, purchase, or in any other way to place or cause Hass avocados...

  12. 7 CFR 1219.11 - Handle.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... AND ORDERS; MISCELLANEOUS COMMODITIES), DEPARTMENT OF AGRICULTURE HASS AVOCADO PROMOTION, RESEARCH, AND INFORMATION Hass Avocado Promotion, Research, and Information Order Definitions § 1219.11 Handle. Handle means to pack, process, transport, purchase, or in any other way to place or cause Hass avocados...

  13. 7 CFR 1219.11 - Handle.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... AND ORDERS; MISCELLANEOUS COMMODITIES), DEPARTMENT OF AGRICULTURE HASS AVOCADO PROMOTION, RESEARCH, AND INFORMATION Hass Avocado Promotion, Research, and Information Order Definitions § 1219.11 Handle. Handle means to pack, process, transport, purchase, or in any other way to place or cause Hass avocados...

  14. 13 CFR 120.333 - Are there any special credit criteria?

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... LOANS Special Purpose Loans Energy Conservation § 120.333 Are there any special credit criteria? In addition to regular credit evaluation criteria, SBA shall weigh the greater risk associated with energy projects. SBA shall consider such factors as quality of the product or service, technical qualifications of...

  15. 13 CFR 120.333 - Are there any special credit criteria?

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... LOANS Special Purpose Loans Energy Conservation § 120.333 Are there any special credit criteria? In addition to regular credit evaluation criteria, SBA shall weigh the greater risk associated with energy projects. SBA shall consider such factors as quality of the product or service, technical qualifications of...

  16. 13 CFR 120.333 - Are there any special credit criteria?

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... LOANS Special Purpose Loans Energy Conservation § 120.333 Are there any special credit criteria? In addition to regular credit evaluation criteria, SBA shall weigh the greater risk associated with energy projects. SBA shall consider such factors as quality of the product or service, technical qualifications of...

  17. 13 CFR 120.333 - Are there any special credit criteria?

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... LOANS Special Purpose Loans Energy Conservation § 120.333 Are there any special credit criteria? In addition to regular credit evaluation criteria, SBA shall weigh the greater risk associated with energy projects. SBA shall consider such factors as quality of the product or service, technical qualifications of...

  18. FRAMEWORK FOR DEVELOPING SUSPENDED AND BEDDED SEDIMENT (SABS) WATER QUALITY CRITERIA: STEP 4 - DEFINE POTENTIAL RANGES IN VALUE OF THE SABS AND RESPONSE INDICATORS, AND CLASSIFICATION OF WATERBODIES USING AN EMPIRICAL APPROACH

    EPA Science Inventory

    After reviewing existing water quality criteria and consulting stakeholders, EPA developed a process that states, tribes, and regions can use to develop scientifically defensible SABS criteria. The process is flexible, can be adapted to utilize existing data sets, and can be gea...

  19. Fish consumption as a driver of risk-management decisions and human health-based water quality criteria.

    PubMed

    Judd, Nancy; Lowney, Yvette; Anderson, Paul; Baird, Suzanne; Bay, Steven M; Breidt, Jay; Buonanduci, Michele; Dong, Zhao; Essig, Don; Garry, Michael R; Jim, Rebecca C; Kirkwood, Gemma; Moore, Shelly; Niemi, Cheryl; O'Rourke, Rory; Ruffle, Betsy; Schaider, Laurel A; Vidal-Dorsch, Doris E

    2015-11-01

    The use and interpretation of fish consumption surveys and interviews, the application of fish consumption rates for sediment evaluation and cleanup, and the development of human health water quality criteria (HH WQC) are complex and interrelated issues. The present article focuses on these issues using examples from the United States, although the issues may be relevant for other countries. Some key considerations include the fact that there are many types of fish consumption surveys (e.g., 24-h recall surveys, food frequency questionnaires, creel surveys), and these surveys have different advantages and limitations. Identification of target populations for protection, identification of the species and quantities of fish consumed, and determination of bioaccumulation assumptions are important factors when developing water quality and sediment screening levels and standards. Accounting for the cultural importance of fish consumption for some populations is an even more complex element. Discussions about HH WQC often focus only on the fish consumption rate and may not have broad public input. Some states are trying to change this through extensive public participation efforts and use of probabilistic approaches to derive HH WQC. Finally, there are limits to what WQC can achieve. Solutions beyond the establishment of WQC that target toxics reduction from other sources may provide the greatest improvements to water quality and reductions in human health risks in the future. © 2015 SETAC.

  20. Educational Television Personnel's Review of the Technical Quality, Content Criteria, and Marketability of AEL's "Around the Bend" Pilot Tapes. Technical Report No. 31.

    ERIC Educational Resources Information Center

    Shively, Joe E.

    In order to determine whether Appalachia Educational Laboratory (AEL) had the capability of producing a TV series of high technical quality with content that met criteria designed for the selection of children's television programs, a pilot tape produced by AEL was submitted for rating to educational television (ETV) specialists from the State…